WorldWideScience

Sample records for current technological developments

  1. Current Status of VHTR Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    David Petti; Hans Gougar; Richard Wright; William Windes; Steve Herring; Richard Schultz; Paul Humrickhouse

    2010-10-01

    Abstract – High Temperature Gas-cooled Reactors (HTGRs) featuring particle fuel reached the stage of commercial deployment in the mid-1980s with the Fort St.Vrain and Thorium HochTemperatur Reaktor feeding electricity to the grids in the United States and West Germany, respectively. The technology was then adopted by Japan and China with the operation of the High Temperature Test Reactor in Oarai, Japan and the High Temperature Reactor (HTR-10) in China. Increasing the outlet temperature of the HTGR to even higher temperatures above 900°C will improve the thermodynamic efficiency of the system and enable application of a new class of gas reactor, the very high temperature reactor, to provide process heat, electricity, and hydrogen to chemical industries with the attendant benefits of improved energy security and reduced CO2 emissions. However, the increase in coolant outlet temperature presents a number of technical challenges associated with fuel, materials, power conversion, and analysis methods for the reactor and hydrogen production. The U.S. Department of Energy is sponsoring a broad program of research and development with a goal of addressing the technical challenges over a broad range of outlet temperatures as part of the Next Generation Nuclear Plant Project. This paper describes the research and development activities that are currently underway to realize the technologies needed for an HTGR that features outlet temperatures of 750 to 950°C.

  2. Current Situations and Developing Tendency of China Post's Logistic Technology

    Institute of Scientific and Technical Information of China (English)

    XU Ru-wei; LI Xue-ping

    2004-01-01

    This paper briefly introduces the construction of China Post's physical network and information network and offers some general ideas about how to develop modern postal logistics. It dwells on the sortation technology, the Chinese Character Recognition Technology and the current situations and tendencies of the Research and Development (R&D) of the Logistic Information Management System.

  3. Current situation and development of solar heating technology in China

    Institute of Scientific and Technical Information of China (English)

    Zheng Ruicheng

    2009-01-01

    It is introduced the current situation and development for solar heating technology including passive solar heat-ing and solar heating combisystems in China in this paper. Combined with the engineering application projects, the au-thor gave the technical and economic analysis of the passive solar and solar heating combisystems in China and summa-rized the developing obstacle and the spreading tactics for raising marketing of the solar heating in China.

  4. Robotic technology in spine surgery: current applications and future developments.

    Science.gov (United States)

    Stüer, Carsten; Ringel, Florian; Stoffel, Michael; Reinke, Andreas; Behr, Michael; Meyer, Bernhard

    2011-01-01

    Medical robotics incrementally appears compelling in nowadays surgical work. The research regarding an ideal interaction between physician and computer assistance has reached a first summit with the implementation of commercially available robots (Intuitive Surgical's® da Vinci®). Moreover, neurosurgery--and herein spine surgery--seems an ideal candidate for computer assisted surgery. After the adoption of pure navigational support from brain surgery to spine surgery a meanwhile commercially available miniature robot (Mazor Surgical Technologies' The Spine Assist®) assists in drilling thoracic and lumbar pedicle screws. Pilot studies on efficacy, implementation into neurosurgical operating room work flow proved the accuracy of the system and we shortly outline them. Current applications are promising, and future possible developments seem far beyond imagination. But still, medical robotics is in its infancy. Many of its advantages and disadvantages must be delicately sorted out as the patients safety is of highest priority. Medical robots may achieve a physician's supplement but not substitute.

  5. Current State and Development Strategy of CNPC Engineering Technology Service

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Challenges to CNPC engineering technology service Internal contraction and problems (1) Pricing mechanism for technology service. CNPC engineering technology companies have been under deficit for many years after restructuring, and eight subordinate companies lost 239 million RMB in 2008 and even 770 million RMB in 2009.

  6. Bioresorbable vascular scaffolds technology: current use and future developments

    Directory of Open Access Journals (Sweden)

    Giacchi G

    2016-07-01

    Full Text Available Giuseppe Giacchi, Luis Ortega-Paz, Salvatore Brugaletta, Kohki Ishida, Manel Sabaté Cardiology Department, Clinic Cardiovascular Institute, Hospital Clinic, August Pi and Sunyer Biomedical Research Institute (IDIBAPS, University of Barcelona, Barcelona, Spain Abstract: Coronary bioresorbable vascular scaffolds are a new appealing therapeutic option in interventional cardiology. The most used and studied is currently the Absorb BVS™. Its backbone is made of poly-l-lactide and coated by a thin layer of poly-d,l-lactide, it releases everolimus and is fully degraded to H2O and CO2 in 2–3 years. Absorb BVS™ seems to offer several theoretical advantages over metallic stent, as it gives temporary mechanical support to vessel wall without permanently caging it. Therefore, long-term endothelial function and structure are not affected. A possible future surgical revascularization is not compromised. Natural vasomotion in response to external stimuli is also recovered. Several observational and randomized trials have been published about BVS clinical outcomes. The main aim of this review is to carry out a systematic analysis about Absorb BVS™ studies, evaluating also the technical improvements of the Absorb GT1 BVS™. Keywords: Absorb GT1, Absorb BVS™, bioresorbable vascular scaffold, BRS, coronary scaffold

  7. Technology Commercialisation in a Developing Country: Current Condition and Its Challenge in Indonesia

    Directory of Open Access Journals (Sweden)

    Wawan Dhewanto

    2012-01-01

    Full Text Available Innovation is considered the main engine of economic growth in both developed and developing countries. Despite the important role of innovation, little has been understood about technology transfer becoming a commercial success in developing countries, especially in the Indonesian context. The purpose of this paper is to identify technology commercialisation activities in Indonesia. Based on secondary data sources, an analysis of the current state regarding the issue is constructed. The findings in this paper suggest that technology commercialisation in Indonesia is initiated at the levels of university, government research institution, and corporate. This study provides insights for policy makers, business leaders, and university administrators into the appropriate roles of institutions and organisations in promoting and assisting technology commercialisation activities of their respective inventors.Key words: Technology commercialisation, developing country, university, government research institution, corporate

  8. Current Status and Future Development of Integrated Geophysical Technology in China

    Institute of Scientific and Technical Information of China (English)

    HeZhanxiang

    2003-01-01

    The gap between China''s integrated geophysical technology and the world''s advanced technologies has been significantly narrowed as the result of developments in the last decade.The new technology has played a very important role in oil and gas exploration in China, especially for the purposes of targeting seismically opaque zones, decreasing exploration risk, and improving exploration efficiency in the western territories and complex areas in China. The current status and future development of non-seismic integrated geophysical teams in China is discussed.

  9. The age of alternative energies: the current status of new energy technology development

    Energy Technology Data Exchange (ETDEWEB)

    Kawaguchi, Y.

    1986-01-01

    This paper outlines Japan's Sunshine Project and presents the current status of the principal research and development programs involved. These are as follows: 1) solar energy (solar photovoltaic power generation, solar energy systems for industrial use); 2) geothermal energy (technology for geothermal exploration and excavation, hydrothermal power generation, discovery of high-temperature rock); 3) coal energy (coal liquefaction and gasification technology); 4) hydrogen energy (technology for production, transport, storage and utilization of hydrogen); 5) others (wind power and ocean thermal power generation). 7 figs., 3 tabs.

  10. [Current audiovisual technologies are a constituent of the continuing professional development concept].

    Science.gov (United States)

    Bezrukova, E Iu; Zatsepa, S A

    2009-01-01

    The paper is devoted to the topical problems of using innovation, information and communication technologies (ICT) in the higher medical education system, including in postgraduate professional education. The paper shows the key principles for organizing an audiovisual technology-based educational process and gives numerous practical examples of the real use of ICT in the education of not only medical, but also other specialists and the results of studies of applying the current technical aids of innovation professional education. Since each area of manpower training has its specificity and unique goals, the authors propose the highly effective decisions to organize an educational process, which fully take into consideration of the specific features of professional education. These technologies substantially expand access to educational resources, which is of great importance for a strategy of continuing professional development.

  11. Life cycle greenhouse gas emissions of current oil sands technologies: GHOST model development and illustrative application.

    Science.gov (United States)

    Charpentier, Alex D; Kofoworola, Oyeshola; Bergerson, Joule A; MacLean, Heather L

    2011-11-01

    A life cycle-based model, GHOST (GreenHouse gas emissions of current Oil Sands Technologies), which quantifies emissions associated with production of diluted bitumen and synthetic crude oil (SCO) is developed. GHOST has the potential to analyze a large set of process configurations, is based on confidential oil sands project operating data, and reports ranges of resulting emissions, improvements over prior studies, which primarily included a limited set of indirect activities, utilized theoretical design data, and reported point estimates. GHOST is demonstrated through application to a major oil sands process, steam-assisted gravity drainage (SAGD). The variability in potential performance of SAGD technologies results in wide ranges of "well-to-refinery entrance gate" emissions (comprising direct and indirect emissions): 18-41 g CO(2)eq/MJ SCO, 9-18 g CO(2)eq/MJ dilbit, and 13-24 g CO(2)eq/MJ synbit. The primary contributor to SAGD's emissions is the combustion of natural gas to produce process steam, making a project's steam-to-oil ratio the most critical parameter in determining GHG performance. The demonstration (a) illustrates that a broad range of technology options, operating conditions, and resulting emissions exist among current oil sands operations, even when considering a single extraction technology, and (b) provides guidance about the feasibility of lowering SAGD project emissions.

  12. Current status of technology development for fabrication of Indian Test Blanket Module (TBM) of ITER

    Energy Technology Data Exchange (ETDEWEB)

    Jayakumar, T., E-mail: tjk@igcar.gov.in [Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam 603102 (India); Rajendra Kumar, E. [TBM Division, Institute for Plasma Research (IPR), Bhat, Gandhinagar 382428 (India)

    2014-10-15

    Highlights: • Status of technology developments for Indian TBM to be installed in ITER is presented. • Procedure development for EB, laser and laser-hybrid welding of RAFM steel presented. • Filler wires for RAFM steel for TIG, NG-TIG and laser-hybrid welding have been developed. • Feasibility of production of channel plate by HIP technology has been demonstrated. - Abstract: Ever since India decided to install its Lead-Lithium Ceramic Breeder (LLCB) TBM in ITER, various technologies for fabrication of Indian TBM are being pursued by IPR and IGCAR, in collaboration with various research laboratories in India. Welding consumables for joining India specific RAFM steels (IN-RAFMS), procedures for hot isostatic pressing, electron beam welding, laser and laser-hybrid welding have been developed. Considering the complex nature and limited access available for inspection, innovative inspection procedures that involved use of phased array ultrasonic and C-scan imaging are also being pursued. This paper presents the current status of these developments and provides a roadmap for the future activities planned in realizing Indian TBM for testing in ITER.

  13. Education for Sustainable Development: Current Discourses and Practices and Their Relevance to Technology Education

    Science.gov (United States)

    Leal Filho, Walter; Manolas, Evangelos; Pace, Paul

    2009-01-01

    Technology education is a well-established field of knowledge whose applications have many ramifications. For example, technology education may be used as a tool in meeting the challenges of sustainable development. However, the usefulness of technology education to the sustainability debate as a whole and to education for sustainable development…

  14. Current status and future tasks of the Sunshine Project. (Development of new energy technology)

    Energy Technology Data Exchange (ETDEWEB)

    Takada, T.

    1983-01-01

    Since its inception in 1974, the Sunshine Project has involved advances in new energy technology in many areas. The present report covers the principal areas of activity in 1980, examining the development status of solar energy, goethermal energy, coal liquefaction and gasification, hydrogen energy, wind power, ocean thermal energy conversion, etc. Future trends and tasks of new energy technology development are discussed. (In Japanese)

  15. Overview of current capabilities and research and technology developments for planetary protection

    Science.gov (United States)

    Frick, Andreas; Mogul, Rakesh; Stabekis, Pericles; Conley, Catharine A.; Ehrenfreund, Pascale

    2014-07-01

    The pace of scientific exploration of our solar system provides ever-increasing insights into potentially habitable environments, and associated concerns for their contamination by Earth organisms. Biological and organic-chemical contamination has been extensively considered by the COSPAR Panel on Planetary Protection (PPP) and has resulted in the internationally recognized regulations to which spacefaring nations adhere, and which have been in place for 40 years. The only successful Mars lander missions with system-level “sterilization” were the Viking landers in the 1970s. Since then different cleanliness requirements have been applied to spacecraft based on their destination, mission type, and scientific objectives. The Planetary Protection Subcommittee of the NASA Advisory Council has noted that a strategic Research & Technology Development (R&TD) roadmap would be very beneficial to encourage the timely availability of effective tools and methodologies to implement planetary protection requirements. New research avenues in planetary protection for ambitious future exploration missions can best be served by developing an over-arching program that integrates capability-driven developments with mission-driven implementation efforts. This paper analyzes the current status concerning microbial reduction and cleaning methods, recontamination control and bio-barriers, operational analysis methods, and addresses concepts for human exploration. Crosscutting research and support activities are discussed and a rationale for a Strategic Planetary Protection R&TD Roadmap is outlined. Such a roadmap for planetary protection provides a forum for strategic planning and will help to enable the next phases of solar system exploration.

  16. Information Infrastructure Development Recommendations through Analysis of Current Information Technology Infrastructure, Plans and Policies

    Science.gov (United States)

    2007-11-02

    information society , and the military influence on information and communication technologies development; a review of the policy, objectives, concepts and methods, and the resources outlined in the Information Technology Management Strategic Plan, the Defense Information Infrastructure Master Plan, and the Global and National Information Infrastructure

  17. Short-term and long-term Vadose zone monitoring: Current technologies, development, and applications

    Energy Technology Data Exchange (ETDEWEB)

    Faybishenko, Boris

    1999-05-01

    At Hanford, Savannah River, Oak Ridge, Idaho National Engineering and Environmental Laboratory (INEEL), and other DOE sites, field vadose zone observations have shown complex water seepage and mass transport behavior in a highly heterogeneous, thick vadose zone on a variety of scales. Recent investigation showed that severe contamination of soils and groundwater by organic contaminant and nuclear waste occurred because of water seepage and contaminant transport along localized, preferential, fast flow within the heterogeneous vadose zone. However, most of the existing characterization and monitoring methods are not able to locate these localized and persistent preferential pathways associated with specific heterogeneous geologic features, such as clastic dikes, caliche layers, or fractures. In addition, changes in the chemical composition of moving and indigenous solutes, particularly sodium concentration, redox conditions, biological transformation of organic materials, and high temperature, may significantly alter water, chemicals, and bio-transformation exchange between the zones of fast flow and the rest of the media. In this paper, using the data from Hanford and INEEL sites, we will (1) present evidence that central problems of the vadose zone investigations are associated with preferential, fast flow phenomena and accelerated migration of organic and radioactive elements, (2) identify gaps in current characterization and monitoring technologies, and (3) recommend actions for the development of advanced vadose zone characterization and monitoring methods using a combination of hydrologic, geochemical, and geophysical techniques.

  18. The development and current status of the technology of isotope and radiation in China

    Energy Technology Data Exchange (ETDEWEB)

    Luo Zhifu [Dept. of Isotope, China Inst. of Atomic Energy, Beijing, BJ (China)

    1998-10-01

    The research and application of the technology of isotopes and radiation have been reviewed. Since the setup of the China`s first nuclear reactor at China Institute of Nuclear Energy in 1958, the technology of isotopes and radiation has been developed significantly. A research and application system has formed a considerable state. The technology of isotopes and radiation has been taken into the fields of industry, agriculture, medicine, and scientific research. The main achievements are on radiopharmaceuticals, radiation source, radiation process, and radioactive tracers. (author)

  19. dhms drilling technology: current projects and new developments; Bohrtechnik von dhms: Aktuelle Projekte und Neuentwicklungen

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, F.; Maas, M. [deilmann-haniel mining systems gmbh (dhms), Dortmund (Germany)

    2007-02-01

    The Drilling Technology division has meanwhile assumed a leading role at dhms. The long experience with drilling installations of different types and the systematic further development of this equipment is resulting in a sharp increase in worldwide demand. dhms can now achieve results with its drilling technology products also in markets and fields of application, which still did not appear easily accessible some years ago. (orig.)

  20. Current State of Development of Electricity-Generating Technologies: A Literature Review

    Directory of Open Access Journals (Sweden)

    Manfred Lenzen

    2010-03-01

    Full Text Available Electricity is perhaps the most versatile energy carrier in modern economies, and it is therefore fundamentally linked to human and economic development. Electricity growth has outpaced that of any other fuel, leading to ever-increasing shares in the overall mix. This trend is expected to continue throughout the following decades, as large—especially rural—segments of the world population in developing countries start to climb the “energy ladder” and become connected to power grids. Electricity therefore deserves particular attention with regard to its contribution to global greenhouse gas emissions, which is reflected in the ongoing development of low-carbon technologies for power generation. The focus of this updated review of electricity-generating technologies is twofold: (a to provide more technical information than is usually found in global assessments on critical technical aspects, such as variability of wind power, and (b to capture the most recent findings from the international literature. This report covers eight technologies. Seven of these are generating technologies: hydro-, nuclear, wind, photovoltaic, concentrating solar, geothermal and biomass power. The remaining technology is carbon capture and storage. This selection is fairly representative for technologies that are important in terms of their potential capacity to contribute to a low-carbon world economy.

  1. CURRENT LEVEL OF TECHNOLOGICAL DEVELOPMENT OF INTERNATIONAL OIL AND GAS COMPANIES

    Directory of Open Access Journals (Sweden)

    O. B. Lomakina

    2013-01-01

    Full Text Available In the article the questions of modern situation of the development of oil and gas branch of Russian economy are arisen with the accent to the problems, difficulties and role of high technologies in their overcoming. The comparative analysis of investment volumes and their efficiency in oil and gas branch of different countries is made. There is an attempt to investigate the reasons of the modern situation of this branch of economy and to give some recommendations.

  2. The European ITER Test Blanket Modules: Current status of fabrication technologies development and a way forward

    Energy Technology Data Exchange (ETDEWEB)

    Zmitko, Milan, E-mail: milan.zmitko@f4e.europa.eu [Fusion for Energy (F4E), Josep Pla 2, Barcelona (Spain); Galabert, Jose [Fusion for Energy (F4E), Josep Pla 2, Barcelona (Spain); Thomas, Noël [ATMOSTAT, F-94815 Villejuif (France); Forest, Laurent [CEA-Saclay, DEN, DM2S, SEMT, F-91191 Gif-sur-Yvette (France); Bucci, Philippe; Cogneau, Laurence [CEA-DRT, 38000 Grenoble (France); Rey, Jörg; Neuberger, Heiko [Karlsruhe Institute of Technology (KIT), Postfach 3640, Karlsruhe (Germany); Poitevin, Yves [Fusion for Energy (F4E), Josep Pla 2, Barcelona (Spain)

    2015-10-15

    Highlights: • Significant progress on development of welding procedures for European TBM achieved. • Fabrication processes feasibility based on diffusion and fusion welding demonstrated. • TBM box assembly welding scenarios investigated and welding scenarios identified. • Future qualification of pF/WPS proposed through realization of a number of QMUs. - Abstract: The paper reviews fabrication technologies and procedures applied for manufacturing of the TBM sub-components, like, HCLL and HCPB cooling plates, HCLL/HCPB stiffening plates, and HCLL/HCPB first wall and side caps. The used technologies are based on fusion and diffusion welding techniques taking into account specificities of the EUROFER-97 steel. Development of a standardized procedure complying with professional codes and standards (RCC-MRx), a preliminary fabrication/welding procedure specification (pF/WPS), is described as well as a fabrication and characterization of feasibility mock-ups (FMU) aimed at assessing the suitability of a fabrication process for fulfilling the design and fabrication specifications. Also, fabrication procedures for the TBM box assembly are presently under development through collaboration between European Fusion Laboratories and Industry for the establishment of an optimized assembly sequence/scenario and development of standardized welding procedure specifications. Selection of optimized assembly scenario takes into accounts not only the design requirements and fabrication possibilities/constraints but also maximum accessibility to the welds for sound non-destructive examination in compliance with welds classification. A future approach towards qualification of the developed fabrication technologies and procedures, through a number of medium to full-size qualification mock-ups according to European standards, is outlined before construction of the first TBMs.

  3. Myrrha, Technology Development for the Realisation of ADS in Eu:. Current Status & Prospects for Realisation

    Science.gov (United States)

    Fernandez, R.; Abderrahim, H. Aït; Baeten, P.; de Bruyn, D.; Maes, D.; Mazouzi, A. Al; Ariën, B.; Malambu, E.; Schuurmans, P.; Schyns, M.; Sobolev, V.; van den Eynde, G.; Vandeplassche, D.

    2010-06-01

    The coupling between an accelerator, a spallation target and a subcritical core has been studied for the first time at SCK•CEN in collaboration with Ion Beam Applications (IBA, Louvain-la-Neuve) in the frame of the ADONIS project (1995-1997). ADONIS was a small irradiation facility, based on the ADS concept, having a dedicated objective to produce radioisotopes for medical purposes and more particularly 99Mo as a fission product from highly enriched 235U (HEU) fissile targets. The ad-hoc scientific advisory committee recommended extending the purpose of the ADONIS machine to become a Material Testing Reactor (MTR) for material and fuel research, to study the feasibility of transmutation of the minor actinides and to demonstrate at a reasonable power scale the principle of the ADS. The project, since 1998 named MYRRHA, has then evolved to a larger installation. MYRRHA is now conceived as a flexible irradiation facility, able to work as an Accelerator Driven (subcritical mode) and in critical mode. In this way, MYRRHA will allow fuel developments for innovative reactor systems, material developments for GEN IV systems, material developments for fusion reactors, radioisotope production for medical and industrial applications and industrial applications, such as Si-doping. MYRRHA will also demonstrate the ADS full concept by coupling the three components (accelerator, spallation target and subcritical reactor) at reasonable power level to allow operation feedback, scalable to an industrial demonstrator and allow the study of efficient transmutation of high-level nuclear waste. Since MYRRHA is based on the heavy liquid metal technology, the eutectic lead-bismuth, it will be able to significantly contribute to the development of Lead Fast Reactor Technology. Since MYRRHA will also be operated in critical mode, MYRRHA can even better play the role of European Technology Pilot Plant in the roadmap for LFR.

  4. International development assistance for renewable technologies: current programs and institutional requirements

    Energy Technology Data Exchange (ETDEWEB)

    Ashworth, J. H.; Meunier, R. E.

    1979-05-01

    Within the last several years, foreign-assistance donor agencies have begun to provide significant aid for the search for renewable energy sources for developing nations. This paper reports preliminary results from a survey of development--assistance projects in renewable energy sources, indicating which areas are extensions of traditional assistance areas and which are new areas of involvement. The last two portions of the paper indicate certain shortcomings in the current effort, and linkages that must be emphasized in order to incease the effectiveness of the range of donor activities.

  5. Historic Developments, Current Technologies and Potential of Nanotechnology to Develop Next Generation Solar Cells with Improved Efficiency

    Directory of Open Access Journals (Sweden)

    Nisith Raval

    2015-07-01

    Full Text Available Sun is the continuous source of renewable energy, from where we can get abundant of solar energy. Concept of conversionof solar energy into heat was used back in 200 B.C. since then, the solar cells have been developed which can convert solar energy into theelectrical energy and these systems have been produced commercially. The technologies to enhance the power conversion efficiency (PCEhave been continuously improved. Different technologies used for developing solar cells can be categorized either on the basis of materialused or techniques of technology development which is further termed as ‘first generation’ (e.g. crystalline silicon, ‘second generation’(thin films of Amorphous silicon, Copper indium gallium selenide, Cadmium telluride, ‘Third generation’ (Concentrated, Organic and Dyesensitize solar cell. These technologies give PCE up to 25% depending on the technology and the materials used. Nanotechnology enablesthe use of nanomaterial whose size is below 100 nm with extraordinary properties which has the capability to enhance the PCE to greaterextent. Various nanomaterials like Quantum Dots, Quantum well, carbon nanotubes, Nanowire and graphene have been used to makeefficient and economical solar cells, which not only provide high conversion efficiency economically but also are easy to produce. Today,by using nanotechnology, conversion efficiency up to 44.7 % has been achieved by Fraunhofer Institute at Germany. In this review article,we have reviewed the literature including various patents and publications, summarized the history of solar cell development, developmentof different technologies and rationale of their development highlighting the advantages and challenges involved in their development forcommercial purpose. We have also included the recent developments in solar cell research where different nanomaterials have beendesigned and used successfully to prove their superiority over conventional systems.

  6. The development and current status of the technology of isotope and radiation in China

    Energy Technology Data Exchange (ETDEWEB)

    Jinrong, Z. [China Institute of Atomic Energy, Beijing, (China). Department of Isotopes

    1997-10-01

    The research and applications of isotope technology and radiation sources in China are presented. Many effort were directed towards production of radiopharmaceuticals, radiation sources, radiation treatment and radioactive tracers. Reactor and accelerator produced radioisotopes contributed to and will further accelerate the development of nuclear medicine in China. Recently, much attention has been paid on tumor therapy mainly with radiolabelled monoclonal antibody, radiolabelled microsphere and colloid, bone-seeking agents, and radiolabelled Octreotide. Radioimmunoassay has been widely used with many convenient kits available. There are above 30 radioimmunoassay kit produces and more than 60 radioimmunoassay centers. Recently the advance is mainly in solid-phase separation process and in radioimmunoassay method, including some nonradioactive immunoassay methods, such as enzyme immunoassay, fluorescence immunoassay, and chemiluminescence immunoassay. Kits for enzyme immunoassay have been put into clinical use. Various radiation sources are produced for medical purposes and for use in nuclear power stations 4 refs., 8 tabs.

  7. Current Development of Nuclear Thermal Propulsion technologies at the Center for Space Nuclear Research

    Energy Technology Data Exchange (ETDEWEB)

    Robert C. O' Brien; Steven K. Cook; Nathan D. Jerred; Steven D. Howe; Ronald Samborsky; Daniel Brasuell

    2012-09-01

    Nuclear power and propulsion has been considered for space applications since the 1950s. Between 1955 and 1972 the US built and tested over twenty nuclear reactors / rocket engines in the Rover/NERVA programs1. The Aerojet Corporation was the prime contractor for the NERVA program. Modern changes in environmental laws present challenges for the redevelopment of the nuclear rocket. Recent advances in fuel fabrication and testing options indicate that a nuclear rocket with a fuel composition that is significantly different from those of the NERVA project can be engineered; this may be needed to ensure public support and compliance with safety requirements. The Center for Space Nuclear Research (CSNR) is pursuing a number of technologies, modeling and testing processes to further the development of safe, practical and affordable nuclear thermal propulsion systems.

  8. Cancer Technology - Cancer Currents Blog

    Science.gov (United States)

    Blog posts on technologies that affect cancer research and care—including new technologies for detecting cancer, testing treatments, storing/analyzing data, and improving patient care—from NCI Cancer Currents.

  9. Current Technologies and Recent Developments for Screening of HPV-Associated Cervical and Oropharyngeal Cancers

    Directory of Open Access Journals (Sweden)

    Sunny S. Shah

    2016-09-01

    Full Text Available Mucosal infection by the human papillomavirus (HPV is responsible for a growing number of malignancies, predominantly represented by cervical cancer and oropharyngeal squamous cell carcinoma. Because of the prevalence of the virus, persistence of infection, and long latency period, novel and low-cost methods are needed for effective population level screening and monitoring. We review established methods for screening of cervical and oral cancer as well as commercially-available techniques for detection of HPV DNA. We then describe the ongoing development of microfluidic nucleic acid-based biosensors to evaluate circulating host microRNAs that are produced in response to an oncogenic HPV infection. The goal is to develop an ideal screening platform that is low-cost, portable, and easy to use, with appropriate signal stability, sensitivity and specificity. Advances in technologies for sample lysis, pre-treatment and concentration, and multiplexed nucleic acid detection are provided. Continued development of these devices provides opportunities for cancer screening in low resource settings, for point-of-care diagnostics and self-screening, and for monitoring response to vaccination or surgical treatment.

  10. Current Technologies and Recent Developments for Screening of HPV-Associated Cervical and Oropharyngeal Cancers

    Science.gov (United States)

    Shah, Sunny S.; Senapati, Satyajyoti; Klacsmann, Flora; Miller, Daniel L.; Johnson, Jeff J.; Chang, Hsueh-Chia; Stack, M. Sharon

    2016-01-01

    Mucosal infection by the human papillomavirus (HPV) is responsible for a growing number of malignancies, predominantly represented by cervical cancer and oropharyngeal squamous cell carcinoma. Because of the prevalence of the virus, persistence of infection, and long latency period, novel and low-cost methods are needed for effective population level screening and monitoring. We review established methods for screening of cervical and oral cancer as well as commercially-available techniques for detection of HPV DNA. We then describe the ongoing development of microfluidic nucleic acid-based biosensors to evaluate circulating host microRNAs that are produced in response to an oncogenic HPV infection. The goal is to develop an ideal screening platform that is low-cost, portable, and easy to use, with appropriate signal stability, sensitivity and specificity. Advances in technologies for sample lysis, pre-treatment and concentration, and multiplexed nucleic acid detection are provided. Continued development of these devices provides opportunities for cancer screening in low resource settings, for point-of-care diagnostics and self-screening, and for monitoring response to vaccination or surgical treatment. PMID:27618102

  11. Review of supercritical CO2 power cycle technology and current status of research and development

    Directory of Open Access Journals (Sweden)

    Yoonhan Ahn

    2015-10-01

    Full Text Available The supercritical CO2 (S-CO2 Brayton cycle has recently been gaining a lot of attention for application to next generation nuclear reactors. The advantages of the S-CO2 cycle are high efficiency in the mild turbine inlet temperature region and a small physical footprint with a simple layout, compact turbomachinery, and heat exchangers. Several heat sources including nuclear, fossil fuel, waste heat, and renewable heat sources such as solar thermal or fuel cells are potential application areas of the S-CO2 cycle. In this paper, the current development progress of the S-CO2 cycle is introduced. Moreover, a quick comparison of various S-CO2 layouts is presented in terms of cycle performance.

  12. Capturing Nanotechnology's Current State of Development via Analysis of Patents. OECD Science, Technology and Industry Working Papers, 2007/4

    Science.gov (United States)

    Igami, Masatsura; Okazaki, Teruo

    2007-01-01

    This analysis aims at capturing current inventive activities in nanotechnologies based on the analysis of patent applications to the European Patent Office (EPO). Reported findings include: (1) Nanotechnology is a multifaceted technology, currently consisting of a set of technologies on the nanometre scale rather than a single technological field;…

  13. Current developments and future perspective on technologies for system impairments and compensations

    Science.gov (United States)

    Weiershausen, Werner; Leppla, Ralph; Vorbeck, S.

    2002-07-01

    Due to increasing traffic demands telecommunication operators have to upgrade the transmission capacity of their networks. Since the success story of WDM in optical fiber based networks, component and system manufacturers as well as operators are dealing with the question if it is better to increase the number of WDM channels remaining at low channel bitrate or to enhance the channel line rate itself. The momentary situation is that already 10 Gbit/s based systems are installed for client traffic and are running properly. By a comparison of the technical advantages and business cases for a lot of transmission scenarios, the 10 Gbit/s solution turns out to be the preferable solution if compared to 2.5-Gbit/s-based systems. In the meantime 40GHz electronics has made severe progress so that now it seems to be possible to take the step towards the next hierarchy, the 40 Gbit/s channel rate. Nevertheless, many system manufacturers still wait with the market introduction of 40 Gbit/s, on the one hand because we observe a stagnant capacity demand this year, and on the other hand because the business case seems yet not to be competitive. One of the reasons for this is the impact of different physical limitations of fast optical fiber transmission. While the step from 2.5 to 10 Gbit/s still did not raise severe technological problems for medium distances, this is completely different for ultra long haul systems and especially for all 40-Gbit/s-based systems. While nonlinear effects still can be sufficiently managed, phenomena like, e.g., polarization-mode dispersion (PMD), chromatic dispersion mismatch, and gain tilt of optical amplifiers play an important role. Chromatic dispersion and polarization effects may vary with time so that either passive or adaptive compensation schemes may be needed in order to realize sufficiently long transmission distances. This paper will deal with different current solutions to overcome limitations from fibers and components, namely the use

  14. Current development of radon and radium monitoring at the Federal University of Technology (UTFPR)

    Energy Technology Data Exchange (ETDEWEB)

    Paschuk, Sergei A.; Correa, Janine N.; Kappke, Jaqueline; Claro, Flavia Del; Perna, Allan F.N.; Reque, Marilson; Levchuk, Leonid, E-mail: sergei@utfpr.edu.br, E-mail: janine_nicolosi@hotmail.com, E-mail: flavia_delclaro@yahoo.com.br [Universidade Federal Tecnologica do Parana (UTFPR), Curitiba, PR (Brazil); Denyak, Valeriy; Schelin, Hugo R. [Instituto de Pesquisa Pele Pequeno Principe, Curitiba, PR (Brazil); Rocha, Zildete; Santos, Talita O., E-mail: rochaz@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN-CNEN/MG), Belo Horizonte, MG (Brazil)

    2013-07-01

    The present work describes the principal results concerning the radon and radium measurements at Curitiba (PR) urban area during the last decade. The monitoring was performed in cooperation with the Center of Nuclear Technology Development (CDTN/CNEN). For radon in air activity measurements, it was used polycarbonate etched track detectors such as LEXAN and CR-39, mounted in diffusion chambers. For soil gas measurements, the experimental setup was based on the Professional AlphaGUARD Radon Monitor connected to the Soil Gas Probe, filter vessels and air pump (AlphaPUMP), following the recommended protocols elaborated in the Soil-Gas Radon Intercomparison Measurements performed at different Countries of the world. In the case of radon tests in drinking water, the experimental setup was based on the AlphaGUARD Radon monitor and Electronic Radon Detector RAD7 connected to a special kit of glass vessels through the air pump. The obtained results permitted to identify few dwellings where radon concentration in air was found bigger than 600 Bq/m{sup 3}, that is considered as the action level by most of the European Community and the World Health Organization (WHO). In the case of well water, collected samples presented the average Rn-222 activity of about 60 Bq/L, that is 6 times bigger than the maximum level recommended by USEPA. Some artesian wells presented radon activity of almost 200 Bq/L. More over, almost all water samples presented the radioactivity of radium (Ra-226) salts bigger than the upper limit for global alpha radioactivity of potable water established by the Norms and Regulation of the Brazilian Ministry of Health. (author)

  15. Current Pretreatment Technologies for the Development of Cellulosic Ethanol and Biorefineries.

    Science.gov (United States)

    Silveira, Marcos Henrique Luciano; Morais, Ana Rita C; da Costa Lopes, Andre M; Olekszyszen, Drielly Nayara; Bogel-Łukasik, Rafał; Andreaus, Jürgen; Pereira Ramos, Luiz

    2015-10-26

    Lignocellulosic materials, such as forest, agriculture, and agroindustrial residues, are among the most important resources for biorefineries to provide fuels, chemicals, and materials in such a way to substitute for, at least in part, the role of petrochemistry in modern society. Most of these sustainable biorefinery products can be produced from plant polysaccharides (glucans, hemicelluloses, starch, and pectic materials) and lignin. In this scenario, cellulosic ethanol has been considered for decades as one of the most promising alternatives to mitigate fossil fuel dependence and carbon dioxide accumulation in the atmosphere. However, a pretreatment method is required to overcome the physical and chemical barriers that exist in the lignin-carbohydrate composite and to render most, if not all, of the plant cell wall components easily available for conversion into valuable products, including the fuel ethanol. Hence, pretreatment is a key step for an economically viable biorefinery. Successful pretreatment method must lead to partial or total separation of the lignocellulosic components, increasing the accessibility of holocellulose to enzymatic hydrolysis with the least inhibitory compounds being released for subsequent steps of enzymatic hydrolysis and fermentation. Each pretreatment technology has a different specificity against both carbohydrates and lignin and may or may not be efficient for different types of biomasses. Furthermore, it is also desirable to develop pretreatment methods with chemicals that are greener and effluent streams that have a lower impact on the environment. This paper provides an overview of the most important pretreatment methods available, including those that are based on the use of green solvents (supercritical fluids and ionic liquids).

  16. A summary report on the search for current technologies and developers to develop depth profiling/physical parameter end effectors

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Q.H.

    1994-09-12

    This report documents the search strategies and results for available technologies and developers to develop tank waste depth profiling/physical parameter sensors. Sources searched include worldwide research reports, technical papers, journals, private industries, and work at Westinghouse Hanford Company (WHC) at Richland site. Tank waste physical parameters of interest are: abrasiveness, compressive strength, corrosiveness, density, pH, particle size/shape, porosity, radiation, settling velocity, shear strength, shear wave velocity, tensile strength, temperature, viscosity, and viscoelasticity. A list of related articles or sources for each physical parameters is provided.

  17. Current metabolomics: technological advances.

    Science.gov (United States)

    Putri, Sastia P; Yamamoto, Shinya; Tsugawa, Hiroshi; Fukusaki, Eiichiro

    2013-07-01

    Metabolomics, the global quantitative assessment of metabolites in a biological system, has played a pivotal role in various fields of science in the post-genomic era. Metabolites are the result of the interaction of the system's genome with its environment and are not merely the end product of gene expression, but also form part of the regulatory system in an integrated manner. Therefore, metabolomics is often considered a powerful tool to provide an instantaneous snapshot of the physiology of a cell. The power of metabolomics lies on the acquisition of analytical data in which metabolites in a cellular system are quantified, and the extraction of the most meaningful elements of the data by using various data analysis tool. In this review, we discuss the latest development of analytical techniques and data analyses methods in metabolomics study.

  18. Investigation of the current requirements engineering practices among software developers at the Universiti Utara Malaysia Information Technology (UUMIT) centre

    Science.gov (United States)

    Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Abdullah, Inam

    2016-08-01

    Requirements Engineering (RE) is a systemic and integrated process of eliciting, elaborating, negotiating, validating and managing of the requirements of a system in a software development project. UUM has been supported by various systems developed and maintained by the UUM Information Technology (UUMIT) Centre. The aim of this study was to assess the current requirements engineering practices at UUMIT. The main problem that prompted this research is the lack of studies that support software development activities at the UUMIT. The study is geared at helping UUMIT produce quality but time and cost saving software products by implementing cutting edge and state of the art requirements engineering practices. Also, the study contributes to UUM by identifying the activities needed for software development so that the management will be able to allocate budget to provide adequate and precise training for the software developers. Three variables were investigated: Requirement Description, Requirements Development (comprising: Requirements Elicitation, Requirements Analysis and Negotiation, Requirements Validation), and Requirement Management. The results from the study showed that the current practice of requirement engineering in UUMIT is encouraging, but still need further development and improvement because a few RE practices were seldom practiced.

  19. The current status of the development of the technology on 3D computer simulation in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hee Reyoung; Park, Seung Kook; Chung, Un Soo; Jung, Ki Jung

    2002-05-01

    The development background and property of the COSIDA, which is the 3D computer simulation system for the analysis on the dismantling procedure of the nuclear facilities in Japan was reviewed. The function of the visualization on the work area, Kinematics analysis and dismantling scenario analysis, which are the sub systems of the COSIDA, has been investigated. The physical, geometrical and radiological properties were modelled in 2D or 3D in the sub system of the visualization of the work area. In the sub system of the kinematics analysis, the command set on the basic work procedure for the control of the motion of the models at a cyber space was driven. The suitability of the command set was estimated by the application of COSIDA to the programming on the motion of the remote dismantling tools for dismantling the components of the nuclear facilities at cyber space.

  20. Innate and adaptive immunity in the development of depression: An update on current knowledge and technological advances.

    Science.gov (United States)

    Haapakoski, Rita; Ebmeier, Klaus P; Alenius, Harri; Kivimäki, Mika

    2016-04-01

    The inflammation theory of depression, proposed over 20years ago, was influenced by early studies on T cell responses and since then has been a stimulus for numerous research projects aimed at understanding the relationship between immune function and depression. Observational studies have shown that indicators of immunity, especially C reactive protein and proinflammatory cytokines, such as interleukin 6, are associated with an increased risk of depressive disorders, although the evidence from randomized trials remains limited and only few studies have assessed the interplay between innate and adaptive immunity in depression. In this paper, we review current knowledge on the interactions between central and peripheral innate and adaptive immune molecules and the potential role of immune-related activation of microglia, inflammasomes and indoleamine-2,3-dioxygenase in the development of depressive symptoms. We highlight how combining basic immune methods with more advanced 'omics' technologies would help us to make progress in unravelling the complex associations between altered immune function and depressive disorders, in the identification of depression-specific biomarkers and in developing immunotherapeutic treatment strategies that take individual variability into account.

  1. Current technologies in vehicular communication

    CERN Document Server

    Dimitrakopoulos, George

    2017-01-01

    This book provides a concise and comprehensive overview of vehicular communication technologies. It classifies all relevant standards, protocols and applications, so as to enable the reader to gain a holistic approach towards the subject of vehicular communications. The primary methods are algorithmic processes and simulation results. First, an overview and classification of vehicular technologies is presented. Then, the book focuses on specific applications of V2V and V2I communications. Special attention is given to recent research and development results regarding R&D projects in the field, in cooperation with car manufacturing companies and universities at a global level. Designed to facilitate understanding of vehicle to vehicle and vehicle to infrastructure technologies, this textbook is appropriate for undergraduate and graduate students of vehicular communications or mobile networks.

  2. Fusion development and technology

    Energy Technology Data Exchange (ETDEWEB)

    Montgomery, D.B.

    1992-01-01

    This report discusses the following: superconducting magnet technology; high field superconductors; advanced magnetic system and divertor development; poloidal field coils; gyrotron development; commercial reactor studies--aries; ITER physics: alpha physics and alcator R D for ITER; lower hybrid current drive and heating in the ITER device; ITER superconducting PF scenario and magnet analysis; ITER systems studies; and safety, environmental and economic factors in fusion development.

  3. Harnessing Ocean Energy by Tidal Current Technologies

    Directory of Open Access Journals (Sweden)

    Nasir Mehmood

    2012-09-01

    Full Text Available The world is heavily dependent on fossil fuels since most of its energy requirements are fulfilled by conventional methods of burning these fuels. The energy demand is increasing by day with growing population. The energy production by fossil fuels is devastating the environment and survival of life on globe is endangered. The renewal energy technologies are vital to ensure future energy sustenance and environmental issues. Ocean is a vast resource of renewable energy. The technology today makes it possible to extract energy from tides. The growing interest in exploring tidal current technologies has compelling reasons such as security and diversity of supply, intermittent but predictable and limited social and environmental impacts. The purpose of this study is to present a comprehensive review of tidal current technologies to harness ocean energy. The ocean energy resources are presented. The author discusses tidal energy technologies. The tidal current turbines are discussed in detail. The author reviews today’s popular tidal current technologies. The present status of ocean energy development is also reported.

  4. Current submarine atmosphere control technology.

    Science.gov (United States)

    Mazurek, W

    1998-01-01

    Air purification in submarines was introduced towards the end of World War II and was limited to the use of soda lime for the removal of carbon dioxide and oxygen candles for the regeneration of oxygen. The next major advances came with the advent of nuclear-powered submarines. These included the development of regenerative and, sometimes, energy-intensive processes for comprehensive atmosphere revitalization. With the present development of conventional submarines using air-independent propulsion there is a requirement for air purification similar to that of the nuclear-powered submarines but it is constrained by limited power and space. Some progress has been made in the development of new technology and the adoption of air purification equipment used in the nuclear-powered submarines for this application.

  5. Development of Harmonic-Noise Reduction Technology in Diagnostic Method using AC Loss Current for Water Treed XLPE Cable

    Science.gov (United States)

    Tsujimoto, Tomiyuki; Nakade, Masahiko; Yagi, Yukihiro; Ishii, Noboru

    Water tree is one of the degradation aspects of XLPE cables used for under-ground distribution or transmission lines. We have developed the loss current method using 3rd harmonic in AC loss current for cable diagnosis. Harmonic components in loss current arise as a result of the non-linear voltage-current characteristics of water trees. We confirmed that the 3rd harmonic in AC loss current had good correlation with water tree growth and break down strength. After that, we have applied this method to the actual 66kV XLPE cable lines. Up to now, the number of the application results is more than 120 lines. In this method, it is sometimes said that the degradation signal (3rd harmonic in loss current) is affected by the 3rd harmonic in the test voltage. To indicate and solve this problem, we investigated the extent of influence by 3rd harmonic in the test voltage, and found the rule of the influence. As a result, we developed a new technique of harmonic-noise reduction in loss current method that enabled a more highly accurate diagnosis and confirmed the effectiveness of this new technique by simulations and experiments with actual cables.

  6. Current Abstracts Nuclear Reactors and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Bales, J.D.; Hicks, S.C. [eds.

    1993-01-01

    This publication Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on the Energy Science and Technology Database and Nuclear Science Abstracts (NSA) database. Current information, added daily to the Energy Science and Technology Database, is available to DOE and its contractors through the DOE Integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user`s needs.

  7. Advanced Adaptive Optics Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Olivier, S

    2001-09-18

    The NSF Center for Adaptive Optics (CfAO) is supporting research on advanced adaptive optics technologies. CfAO research activities include development and characterization of micro-electro-mechanical systems (MEMS) deformable mirror (DM) technology, as well as development and characterization of high-resolution adaptive optics systems using liquid crystal (LC) spatial light modulator (SLM) technology. This paper presents an overview of the CfAO advanced adaptive optics technology development activities including current status and future plans.

  8. Aquantis Ocean Current Turbine Development Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Fleming, Alex J.

    2014-08-23

    The Aquantis® Current Plane (“C-Plane”) technology developed by Dehlsen Associates, LLC (DA) and Aquantis, Inc. is an ocean current turbine designed to extract kinetic energy from ocean currents. The technology is capable of achieving competitively priced base-load, continuous, and reliable power generation from a source of renewable energy not before possible in this scale or form.

  9. Current Trends in Higher Education Technology: Simulation

    Science.gov (United States)

    Damewood, Andrea M.

    2016-01-01

    This paper is focused on how technology in use changes over time, and the current trend of simulation technology as a supported classroom technology. Simulation-based training as a learning tool is discussed within the context of adult learning theories, as is the technology used and how today's higher education technology administrators support…

  10. ECH Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Temkin, Richard [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2014-12-24

    Electron Cyclotron Heating (ECH) is needed for plasma heating, current drive, plasma stability control, and other applications in fusion energy sciences research. The program of fusion energy sciences supported by U. S. DOE, Office of Science, Fusion Energy Sciences relies on the development of ECH technology to meet the needs of several plasma devices working at the frontier of fusion energy sciences research. The largest operating ECH system in the world is at DIII-D, consisting of six 1 MW, 110 GHz gyrotrons capable of ten second pulsed operation, plus two newer gyrotrons. The ECH Technology Development research program investigated the options for upgrading the DIII-D 110 GHz ECH system. Options included extending present-day 1 MW technology to 1.3 – 1.5 MW power levels or developing an entirely new approach to achieve up to 2 MW of power per gyrotron. The research consisted of theoretical research and designs conducted by Communication and Power Industries of Palo Alto, CA working with MIT. Results of the study would be validated in a later phase by research on short pulse length gyrotrons at MIT and long pulse / cw gyrotrons in industry. This research follows a highly successful program of development that has led to the highly reliable, six megawatt ECH system at the DIII-D tokamak. Eventually, gyrotrons at the 1.5 megawatt to multi-megawatt power level will be needed for heating and current drive in large scale plasmas including ITER and DEMO.

  11. 我国纺织环保上浆现状及发展趋势%Current Status and Developing Trend of Environmental-friendly Sizing Technologies in China

    Institute of Scientific and Technical Information of China (English)

    王耀

    2014-01-01

    The development of textile sizing technologies should meet the requirements of low-carbon, eco-friendly, recycling economy and the developing trend of textile industry. This paper describes the current status, characteristics and existing problems of environmental-friendly sizing technologies in China and puts forward some ideas for promoting the development of environmental-friendly sizing technologies in China.%纺织上浆工艺的发展要符合低碳、绿色的循环经济发展要求及纺织工业发展趋势。文章主要介绍了目前我国纺织环保上浆的现状、特点及存在的问题,为加快推进我国纺织环保上浆工艺的发展提出了思路。

  12. Sensing technology current status and future trends

    CERN Document Server

    Mukhopadhyay, Subhas; Jayasundera, Krishanthi; Bhattacharyya, Nabarun

    2014-01-01

    This book is written for academic and industry professionals working in the field of sensing, instrumentation and related fields, and is positioned to give a snapshot of the current state of the art in sensing technology, particularly from the applied perspective.  The book is intended to give a broad overview of the latest developments, in addition to discussing the process through which researchers go through in order to develop sensors, or related systems, which will become more widespread in the future.  

  13. Sinoprobe Datacenter Development: Current Status

    Science.gov (United States)

    Guan, Y.; Dong, S.; Chen, Z.; Chen, G.; Cheng, M.

    2011-12-01

    The project of the Sinoprobe datacenter development is to build new IT infrastructures needed to store, visualize and manage all the data acquired by SinoProbe program.The SinoProbe data center is designed using service-oriented architecture (SOA) principles. More specifically, service component architecture (SCA) is used to implement sinoprobe data services. It also uses various advanced technologies such as Java/JEE for the platform, PostgresSQL/PostGIS for the data storage, ApacheDS for LDAP, CoachDB for the medadata storage, GeoServer for the GIS services, ExtJs and OpenLayer for the Ajax framework, and Apache Shiro for the security framework. Through the integration and development of various technologies used, the major services of the datacenter system are implemented including the security infrastructure services (user authentication and authorization), metadata services, data warehouse stores, data services, GIS services, and web portal. There are also visualization components including the development of a virtual globe to replace the currently used Google Earth. This poster presents the current status of the SinoProbe data center development, and the detailed discussion of the system.

  14. Graphite Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    W. Windes; T. Burchell; M.Carroll

    2010-10-01

    The Next Generation Nuclear Plant (NGNP) will be a helium-cooled High Temperature Gas Reactor (HTGR) with a large graphite core. Graphite physically contains the fuel and comprises the majority of the core volume. Graphite has been used effectively as a structural and moderator material in both research and commercial high-temperature gas-cooled reactors. This development has resulted in graphite being established as a viable structural material for HTGRs. While the general characteristics necessary for producing nuclear grade graphite are understood, historical “nuclear” grades no longer exist. New grades must be fabricated, characterized, and irradiated to demonstrate that current grades of graphite exhibit acceptable non-irradiated and irradiated properties upon which the thermomechanical design of the structural graphite in NGNP is based. This Technology Development Plan outlines the research and development (R&D) activities and associated rationale necessary to qualify nuclear grade graphite for use within the NGNP reactor.

  15. An impression on current developments in the technology, chemistry, and biological activities of ginger (Zingiber officinale Roscoe).

    Science.gov (United States)

    Kubra, I Rahath; Rao, L Jagan Mohan

    2012-01-01

    Ginger rhizome (Zingiber officinale Roscoe) is widely cultivated as a spice for its aromatic and pungent components. The essential oil and oleoresins from ginger are valuable products responsible for the characteristic flavor and pungency. Both are used in several food products such as soft beverages and also in many types of pharmaceutical formulations. More than 100 compounds have been reported from ginger, some of which are isolated and characterized, others are tentatively identified by GC-MS and / or LC-MS. [6]-Gingerol, the major gingerol in ginger rhizomes, has been found to possess many interesting pharmacological and physiological activities, such as anti-inflammatory, analgesic, and cardiotonic effects. Ginger is considered as "generally recognized as safe" (GRAS) by Food and Drug Administration (FDA), USA. Due to all these properties, ginger has gained considerable attention in developed countries in recent years, especially for its use in the treatment of inflammatory conditions. The present review is a persuasive presentation of the current information on processing, chemistry, biological activities, and medicinal uses of ginger. Further studies are required for the validation of the beneficial uses. Formulation for novel products and new usages may emerge in the years to come, based on the revealed results of various studies.

  16. Developing and Evaluating Collaborative Technologies

    Science.gov (United States)

    2005-11-01

    undertaking. This paper considers the topic of assessing collaborative technologies in the context of military logistics . A historical view of collaborative...research in military logistics is provided, as well as a discussion of current research aimed at developing a framework for assessing collaborative technologies.

  17. Research and development of a high-temperature helium-leak detection system (joint research). Part 1 survey on leakage events and current leak detection technology

    Energy Technology Data Exchange (ETDEWEB)

    Sakaba, Nariaki; Nakazawa, Toshio; Kawasaki, Kozo [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Urakami, Masao; Saisyu, Sadanori [Japan Atomic Power Co., Tokyo (Japan)

    2003-03-01

    In High Temperature Gas-cooled Reactors (HTGR), the detection of leakage of helium at an early stage is very important for the safety and stability of operations. Since helium is a colourless gas, it is generally difficult to identify the location and the amount of leakage when very little leakage has occurred. The purpose of this R and D is to develop a helium leak detection system for the high temperature environment appropriate to the HTGR. As the first step in the development, this paper describes the result of surveying leakage events at nuclear facilities inside and outside Japan and current gas leakage detection technology to adapt optical-fibre detection technology to HTGRs. (author)

  18. 植物转基因技术——回顾与前瞻%Plant Transgenic Technology: Past and Current Development

    Institute of Scientific and Technical Information of China (English)

    杨维才

    2013-01-01

    自从1953年Watson和Crick发现DNA双螺旋结构以来,以DNA重组技术为基础的转基因技术迅速发展,不可避免地对人们的日常生活产生了巨大的影响.该文回顾了植物转基因技术的发展历程和现状,重点介绍了基因定点突变技术ZFN和TALEN,以期帮助读者全面快速地了解这一令人充满期待的新的转基因技术.%Since the discovery of the DNA double helix structure by Watson and Crick in 1953, technologies based on DNA recombination, such as transgenic technology, have developed so quickly that we can not escape its impact in our daily life. This short review discussed the past and current status of transgenic technology in plants with a focus on ZFN and TALEN technology to provide a quick overview of this exciting technology.

  19. Educational Technology: Effective Leadership and Current Initiatives

    Science.gov (United States)

    Courville, Keith

    2011-01-01

    (Purpose) This article describes the basis for effective educational technology leadership and a few of the current initiatives and impacts that are a result of the aforementioned effective leadership. (Findings) Topics addressed in this paper include: (1) the role of the educational technology leader in an educational setting; (2) an examination…

  20. Graphite technology development plan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-07-01

    This document presents the plan for the graphite technology development required to support the design of the 350 MW(t) Modular HTGR within the US National Gas-Cooled Reactor Program. Besides descriptions of the required technology development, cost estimates, and schedules, the plan also includes the associated design functions and design requirements.

  1. 汽车自动变速器油的技术现状与发展趋势%Current Technology and Development Trends of Automatic Transmission Fluids

    Institute of Scientific and Technical Information of China (English)

    李茂生; 杜群贵; 贾继欣

    2014-01-01

    The types,characteristics and developing direction of vehicle automatic transmission,and the technical re-quirement,current technological state and development trend of automatic transmission fluids (ATF/CVTF ) were de-scribed.The tribological characteristics and evaluation method of ATF/CVTF were introduced.The development and appli-cation of new automatic transmission fluids and its corresponding evaluation test methods of physical and chemical proper-ties,friction characteristics and wear state,the development of the specifications and standard of automatic transmission flu-ids are key common technologies for development of automatic transmission.%论述汽车自动变速器(AT、CVT)的类型、特点及发展方向,以及与其配套的变速器油(ATF、CVTF)的技术现状和发展趋势,介绍ATF/CVTF的摩擦学特性及其评价方法。开发和应用新型自动变速器油及其相应的摩擦特性测试方法、磨损状态评定手段和油品理化性能测试方法及台架试验方法,制定自动变速器油的规格标准,是促进自动变速器发展的关键共性技术。

  2. Technology-based suicide prevention: current applications and future directions.

    Science.gov (United States)

    Luxton, David D; June, Jennifer D; Kinn, Julie T

    2011-01-01

    This review reports on current and emerging technologies for suicide prevention. Technology-based programs discussed include interactive educational and social networking Web sites, e-mail outreach, and programs that use mobile devices and texting. We describe innovative applications such as virtual worlds, gaming, and text analysis that are currently being developed and applied to suicide prevention and outreach programs. We also discuss the benefits and limitations of technology-based applications and discuss future directions for their use.

  3. The Current Status of Research on GNSS-R Remote Sensing Technology in China and Future Development

    National Research Council Canada - National Science Library

    Li Huang; Xia Qing; Yin Cong; Wan Wei

    2013-01-01

    .... In recent years, development of the navigation satellite remote sensing applications using GNSS as a external illuminator, it has been forming a new Global Navigation Satellite System METeorology (GNSS/MET...

  4. The Recent Developments of Pulsed Eddy Current Nondestructive Testing Technology%脉冲涡流无损检测技术的研究进展

    Institute of Scientific and Technical Information of China (English)

    周德强; 田贵云; 王海涛; 尤丽华

    2011-01-01

    Pulsed eddy current testing(PECT) is a new eddy current testing technology. As the wide spectrum of the excited current or voltage, it is widely used in aerospace, pressure vessels, railways, pipe and so on. The recently research progress including the defect of metal, stress of components, and thermal imaging of pulsed eddy current were discussed. The future trend of development was analyzed.%脉冲涡流检测技术是涡流检测技术的一个新兴分支,其宽频谱的激励方式使得脉冲涡流检测技术在航空航天、压力容器、铁路和管道等领域广泛应用。综述了脉冲涡流检测技术在金属缺陷、应力和热成像等方面的国内外研究进展,分析了脉冲涡流检测技术的发展方向。

  5. 天然气计量检定技术现状及进展%Current Situation and Development of the Natural Gas Metrological Verification Technology

    Institute of Scientific and Technical Information of China (English)

    赵士海; 刘博韬

    2015-01-01

    With the continual increase of requirement of natural gas and global development of natural gas trade, the accuracy of natural gas flow rate measurement attracts more and more attention from the supply and demand sides. In this paper, the current technology situation and development trend of orifice-plate flowmeter, ultrasonic flowmeter and turbine flowmeter were reviewed. Development of the natural gas metrological verification technology used for measurement tracing at home and abroad was also analyzed.%随着天然气需求量的不断增加和天然气贸易的全球化发展,供求双方越来越重视天然气流量计量的准确性。重点论述了广泛应用于天然气流量计量的孔板流量计、超声流量计、涡轮流量计的技术现状和发展趋势,以及国内外用于流量计量值溯源的天然气计量检定站技术的进展情况。

  6. Advanced Mirror Technology Development

    Science.gov (United States)

    Stahl, H. Philip

    2017-01-01

    The Advanced Mirror Technology Development (AMTD) project matures critical technologies required to enable ultra-stable 4-m-or-larger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics and ultra-high-contrast observations of exoplanets.

  7. Ocean Technology Development Tank

    Data.gov (United States)

    Federal Laboratory Consortium — The new SWFSC laboratory in La Jolla incorporates a large sea- and fresh-water Ocean Technology Development Tank. This world-class facility expands NOAA's ability to...

  8. Rehabilitation Technology: Exploitation of R & D and Current Technologies.

    Science.gov (United States)

    Milner, Morris

    1993-01-01

    This paper highlights research, development, and applications of technology in the areas of visual perception, facilitation of human communication, prosthetics and orthotics, and robotics and signal processing. Means by which the application of promising technological developments can be expedited are also discussed. (Author/DB)

  9. Current Status of Concentrator Photovoltaic (CPV) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Philipps, Simon P. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Bett, Andreas W. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Horowitz, Kelsey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurtz, Sarah [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-12-01

    This report summarizes the status of the concentrator photovoltaic (CPV) market and industry as well as current trends in research and technology. This report is intended to guide research agendas for Fraunhofer ISE, the National Renewable Energy Laboratory (NREL), and other R&D organizations. Version 1.1 of this report includes recent progress in CPV. The recent record module efficiency of 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve.

  10. Technology development for safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ho Dong; Kang, H. Y.; Song, D. Y. [and others

    2005-04-01

    The objective of this project are to establish the safeguards technology of the nuclear proliferation resistance to the facilities which handle with high radioactivity nuclear materials like the spent fuel, to provide the foundation of the technical independency for the establishment of the effective management of domestic spent fuels, and to construct the base of the early introduction of the key technology relating to the back-end nuclear fuel cycle through the development of the safeguards technology of the DFDF of the nuclear non-proliferation. The essential safeguards technologies of the facility such as the measurement and account of nuclear materials and the C/S technology were carried out in this stage (2002-2004). The principal results of this research are the development of error reduction technology of the NDA equipment and a new NDA system for the holdup measurement of process materials, the development of the intelligent surveillance system based on the COM, the evaluation of the safeguardability of the Pyroprocessing facility which is the core process of the nuclear fuel cycle, the derivation of the research and development items which are necessary to satisfy the safeguards criteria of IAEA, and the presentation of the direction of the technology development relating to the future safeguards of Korea. This project is the representative research project in the field of the Korea's safeguards. The safeguards technology and equipment developed while accomplishing this project can be applied to other nuclear fuel cycle facilities as well as DFDF and will be contributed to increase the international confidence in the development of the nuclear fuel cycle facility of Korea and its nuclear transparency.

  11. Wind energy technology developments

    DEFF Research Database (Denmark)

    Madsen, Peter Hauge; Hansen, Morten Hartvig; Pedersen, Niels Leergaard

    2014-01-01

    turbine blades and towers are very large series-produced components, which costs and quality are strongly dependent on the manufacturing methods. The industrial wind energy sector is well developed in Denmark, and the competitive advantage of the Danish sector and the potential for job creation......This chapter describes the present mainstream development of the wind turbine technology at present. The turbine technology development trend is characterized by up-scaling to turbines with larger capacity for both onshore and offshore applications, larger rotors and new drivetrain solution......, including the direct-drive solution without gearbox. The technology solutions are strongly influenced by the development of the international industry with a global market for components and a trend towards a “shared” development effort in collaboration between the OEM’s and component sub-suppliers. Wind...

  12. Insider protection technology developments

    Energy Technology Data Exchange (ETDEWEB)

    Foesch, J.; Bortniak, P.; Waddoups, I.

    1994-08-01

    Sandia National Laboratories evaluates and develops new techniques and technologies to ensure the integrity of special nuclear material (SNM) against potential insider threats. We have evaluated several types of sensor technologies and subsystems to monitor and/or track materials and personnel. This past year`s effort has been directed at characterizing commercial developments that meet the Department of Energy`s (DOE) needs in some of these areas. Some of these evaluations are complete and some are still in progress. This paper discusses our work with infrared light (IR), radio frequency (RF), and RF proximity technologies. After these technologies are judged to be applicable to DOE`s needs, we incorporate them into the generic, real time, personnel tracking and material monitoring system.

  13. Mobile Router Technology Development

    Science.gov (United States)

    Ivancic, William D.; Stewart, David H.; Bell, Terry L.; Kachmar, Brian A.; Shell, Dan; Leung, Kent

    2002-01-01

    Cisco Systems and NASA have been performing joint research on mobile routing technology under a NASA Space Act Agreement. Cisco developed mobile router technology and provided that technology to NASA for applications to aeronautic and space-based missions. NASA has performed stringent performance testing of the mobile router, including the interaction of routing and transport-level protocols. This paper describes mobile routing, the mobile router, and some key configuration parameters. In addition, the paper describes the mobile routing test network and test results documenting the performance of transport protocols in dynamic routing environments.

  14. Developing human technology curriculum

    Directory of Open Access Journals (Sweden)

    Teija Vainio

    2012-10-01

    Full Text Available During the past ten years expertise in human-computer interaction has shifted from humans interacting with desktop computers to individual human beings or groups of human beings interacting with embedded or mobile technology. Thus, humans are not only interacting with computers but with technology. Obviously, this shift should be reflected in how we educate human-technology interaction (HTI experts today and in the future. We tackle this educational challenge first by analysing current Master’s-level education in collaboration with two universities and second, discussing postgraduate education in the international context. As a result, we identified core studies that should be included in the HTI curriculum. Furthermore, we discuss some practical challenges and new directions for international HTI education.

  15. Technology maturity and technology development

    Energy Technology Data Exchange (ETDEWEB)

    Underhill, Gary K.; Carlson, Ronald A.; Clendinning, William A.; Erdos, Jozsef; Gault, John; Hall, James W.; Jones, Robert L.; Michael, Herbert K.; Powell, Paul H.; Riemann, Carl F.; Rios-Castellon, Lorenzo; Shepherd, Burchard P.; Wilson, John S.

    1976-01-01

    All of the work reported in the preceding chapters was performed in order to assess the technical, economic, and energetic feasibility of proceeding with more detailed studies of the geopressured geothermal resource. The preliminary conceptual design and costing activities represented the prime activity for component by component review of the maturity of the technology available for resource utilization facilities. The economics and energetics studies focussed attentions on the areas of major capital and energy investment; these results comprise a useful guide for focussing design in order to reduce initial and operations and maintenance costs and/or investment. The following presents a discussion of the primary technical problems identified.

  16. Review of Current Nuclear Vacuum System Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Carroll, M.; McCracken, J.; Shope, T.

    2003-02-25

    Nearly all industrial operations generate unwanted dust, particulate matter, and/or liquid wastes. Waste dust and particulates can be readily tracked to other work locations, and airborne particulates can be spread through ventilation systems to all locations within a building, and even vented outside the building - a serious concern for processes involving hazardous, radioactive, or nuclear materials. Several varieties of vacuum systems have been proposed and/or are commercially available for clean up of both solid and liquid hazardous and nuclear materials. A review of current technologies highlights both the advantages and disadvantages of the various systems, and demonstrates the need for a system designed to address issues specific to hazardous and nuclear material cleanup. A review of previous and current hazardous/nuclear material cleanup technologies is presented. From simple conventional vacuums modified for use in industrial operations, to systems specifically engineered for such purposes, the advantages and disadvantages are examined in light of the following criteria: minimal worker exposure; minimal secondary waste generation;reduced equipment maintenance and consumable parts; simplicity of design, yet fully compatible with all waste types; and ease of use. The work effort reviews past, existing and proposed technologies in light of such considerations. Accomplishments of selected systems are presented, including identified areas where technological improvements could be suggested.

  17. Remediation Technology Collaboration Development

    Science.gov (United States)

    Mahoney, John; Olsen, Wade

    2010-01-01

    This slide presentation reviews programs at NASA aimed at development at Remediation Technology development for removal of environmental pollutants from NASA sites. This is challenging because there are many sites with different environments, and various jurisdictions and regulations. There are also multiple contaminants. There must be different approaches based on location and type of contamination. There are other challenges: such as costs, increased need for resources and the amount of resources available, and a regulatory environment that is increasing.

  18. ABC Technology Development Program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-10-14

    The Accelerator-Based Conversion (ABC) facility will be designed to accomplish the following mission: `Provide a weapon`s grade plutonium disposition capability in a safe, economical, and environmentally sound manner on a prudent schedule for [50] tons of weapon`s grade plutonium to be disposed on in [20] years.` This mission is supported by four major objectives: provide a reliable plutonium disposition capability within the next [15] years; provide a level of safety and of safety assurance that meets or exceeds that afforded to the public by modern commercial nuclear power plants; meet or exceed all applicable federal, state, and local regulations or standards for environmental compliance; manage the program in a cost effective manner. The ABC Technology Development Program defines the technology development activities that are required to accomplish this mission. The technology development tasks are related to the following topics: blanket system; vessel systems; reactivity control systems; heat transport system components; energy conversion systems; shutdown heat transport systems components; auxiliary systems; technology demonstrations - large scale experiments.

  19. Transmutation Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Song, T. Y.; Park, W. S.; Kim, Y. H. (and others)

    2007-06-15

    The spent fuel coming from the PWR is one of the most difficult problems to be solved for the continuous use of nuclear power. It takes a few million years to be safe under the ground. Therefore, it is not easy to take care of the spent fuel for such a long time. Transmutation technology is the key technology which can solve the spent fuel problem basically. Transmutation is to transmute long-lived radioactive nuclides in the spent fuel into short-lived or stable nuclide through nuclear reactions. The long-lived radioactive nuclides can be TRU and fission products such as Tc-99 and I-129. Although the transmutation technology does not make the underground disposal totally unnecessary, the period to take care of the spent fuel can be reduced to the order of a few hundred years. In addition to the environmental benefit, transmutation can be considered to recycle the energy in the spent fuel since the transmutation is performed through nuclear fission reaction of the TRU in the spent fuel. Therefore, transmutation technology is worth being developed in economical aspect. The results of this work can be a basis for the next stage research. The objective of the third stage research was to complete the core conceptual design and verification of the key technologies. The final results will contribute to the establishment of Korean back end fuel cycle policy by providing technical guidelines.

  20. Textile technology development

    Science.gov (United States)

    Shah, Bharat M.

    1995-01-01

    The objectives of this report were to evaluate and select resin systems for Resin Transfer Molding (RTM) and Powder Towpreg Material, to develop and evaluate advanced textile processes by comparing 2-D and 3-D braiding for fuselage frame applications and develop window belt and side panel structural design concepts, to evaluate textile material properties, and to develop low cost manufacturing and tooling processes for the automated manufacturing of fuselage primary structures. This research was in support of the NASA and Langley Research Center (LaRc) Advanced Composite Structural Concepts and Materials Technologies for Primary Aircraft Structures program.

  1. Graphite Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    W. Windes; T. Burchell; R. Bratton

    2007-09-01

    This technology development plan is designed to provide a clear understanding of the research and development direction necessary for the qualification of nuclear grade graphite for use within the Next Generation Nuclear Plant (NGNP) reactor. The NGNP will be a helium gas cooled Very High Temperature Reactor (VHTR) with a large graphite core. Graphite physically contains the fuel and comprises the majority of the core volume. Considerable effort will be required to ensure that the graphite performance is not compromised during operation. Based upon the perceived requirements the major data needs are outlined and justified from the perspective of reactor design, reatcor performance, or the reactor safety case. The path forward for technology development can then be easily determined for each data need. How the data will be obtained and the inter-relationships between the experimental and modeling activities will define the technology development for graphite R&D. Finally, the variables affecting this R&D program are discussed from a general perspective. Factors that can significantly affect the R&D program such as funding, schedules, available resources, multiple reactor designs, and graphite acquisition are analyzed.

  2. Current biotechnological developments in Belgium.

    Science.gov (United States)

    Masschelein, C A; Callegari, J P; Laurent, M; Simon, J P; Taeymans, D

    1989-01-01

    In recent years, actions have been undertaken by the Belgian government to promote process innovation and technical diversification. Research programs are initiated and coordinated by the study committee for biotechnology setup within the Institute for Scientific Research in Industry and Agriculture (IRSIA). As a result of this action, the main areas where biotechnological processes are developed or commercially exploited include plant genetics, protein engineering, hybridoma technology, biopesticides, production by genetic engineering of vaccines and drugs, monoclonal detection of human and animal deseases, process reactors for aerobic and anaerobic wastewater treatment, and genetic modification of yeast and bacteria as a base for biomass and energy. Development research also includes new fermentation technologies principally based on immobilization of microorganisms, reactor design, and optimization of unit operations involved in downstream processing. Food, pharmaceutical, and chemical industries are involved in genetic engineering and biotechnology and each of these sectors is overviewed in this paper.

  3. Current applications of molecular cytogenetic technologies.

    Science.gov (United States)

    Mark, H F; Jenkins, R; Miller, W A

    1997-01-01

    This review discusses select current applications of fluorescent in situ hybridization (FISH) which may be of utility for the average clinical cytogenetic laboratory. Owing to the large number of men and women affected, the applications chosen to illustrate the use of FISH technology in cancer focus on two diseases: breast cancer and prostate cancer. The applicability of FISH to detect common aneuploidies, such as trisomy 21, trisomy 18, trisomy 13 and the sex chromosome aneuploidies in prenatal diagnosis, is discussed, as well as FISH for the detection of microdeletions and microduplications. Quality assurance/quality control issues and standards and guidelines relating to laboratory practices in molecular cytogenetic testing are reviewed.

  4. Current Status on Biochip and Detection Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Hyun; Gwon, Hui Jeong

    2007-06-15

    The recent biotechnology technique has been miniaturized and it features a fusion of electricity, electronics and mechanics in the existing biology. As an example, biochip is a collection of miniaturized test sites (microarrays) arranged on a solid substrate that permits many tests to be performed at the same time in order to achieve higher throughput and speed. Like a computer chip that can perform millions of mathematical operations in a second, the biochip can perform thousands of biological reactions, such as decoding genes, in a few seconds. The biochip is being used in toxicological, protein, and biochemical research and it can also be used to rapidly detect chemical agents used in biological warfare so that defensive measures can be taken. These biochip technologies incorporate elements of microfluidics, micromachining, synthetic chemistry, separation technologies, and detection technologies of biological molecules. Basically, biochips can be divided into two types: microarray and lab-on-a-chip system. Microarrays use planted probes to catch and identify target biological molecules while lab-on-a-chips actively process loaded samples. The biochips are becoming more diverse and customers are appearing all over the world. The products from the biochip market are being used to help accelerating the research processes and capabilities of bio-pharmaceutical drug discovery and basic academic bioresearch. To fully take advantages of the attributes of biochip technologies such as miniaturization, parallelism, automation and integration, there are some problems to overcome. The major problem is to reduce the cost. Currently the prices of biochip products are too expensive to replace traditional products and processes. As a method to solve the problem, a radioisotope can be used as a detecting sensor by appling on the biochip, as it were, radio-biochip that will further bring the cost down. The originality using the radioisotope on the biochip technology will be able

  5. Forecasting for strengthening technological development

    Directory of Open Access Journals (Sweden)

    Aida Mayerly Fúquene Montañez

    2010-05-01

    Full Text Available Producing technological innovation is currently one of the key items in being more competitive. However, production sectors are facing great challenges, including analysing a large amount of available technological and market information regarding the en- vironment for strategic decision-making and being able to launch themselves onto the market with technological developments bringing the desired economic returns. Several tools for analysing information have emerged for reducing the uncertainty of tech- nological and market changes. This article provides conceptual and reflective elements so that forecasting strengthens technolo- gical development (TD. Forecasting is initially proposed as being one of the future methods of analysis having a significant im- pact on decision-making, mainly within the field of economics but which could be extrapolated to making a contribution to TD. The techniques which have been the recent instrument for collecting information for producing forecasting are described, as is work about the concept of surveillance/monitoring and the processes used for coordinating such approaches. It can thus be sta- ted that they provide an excellent basis for strengthening TD by providing platforms for new or improved developments in pro- cesses or products. Reflection about these aspects provides perspectives for implementing technological forecasting (TF in pro- duction systems so that they obtain efficient and concrete results via deterministic methods as input in decision-making in techno- logy regarding its middle- and long-term competitiveness.

  6. Proteomics: technology development and applications.

    Science.gov (United States)

    Walton, S Patrick; Jayaraman, Arul

    2009-02-01

    Technology development in, and the application of, proteomics are emerging areas among chemical engineers and others who presented at the 2008 American Institute of Chemical Engineers (AIChE) Annual Meeting. Overall, the centennial meeting offered a broad current perspective on the discipline of chemical engineering as it enters its second century. Biomedical and biochemical engineering continue to grow as important facets of the discipline. Within these, the value and applicability of proteomics were demonstrated in a number of interesting presentations. This year, as in the recent past, the AIChE Annual Meeting was held in conjunction with the American Electrophoresis Society Annual Meeting. American Electrophoresis Society presenters offered further academic and industrial viewpoints on the still-developing role of proteomics and proteomic technologies in biological and clinical analyses.

  7. Payload software technology: Software technology development plan

    Science.gov (United States)

    1977-01-01

    Programmatic requirements for the advancement of software technology are identified for meeting the space flight requirements in the 1980 to 1990 time period. The development items are described, and software technology item derivation worksheets are presented along with the cost/time/priority assessments.

  8. Oil heat technology research and development

    Energy Technology Data Exchange (ETDEWEB)

    Kweller, E.R. [Department of Energy, Washington, DC (United States); McDonald, R.J. [Brookhaven National Lab., Upton, NY (United States)

    1995-04-01

    The purpose of this United States Department of Energy (DOE)/Brookhaven National Laboratory (BNL) program is to develop a technology base for advancing the state-of-the-art related to oilfired combustion equipment. The major thrust is through technology based research that will seek new knowledge leading to improved designs and equipment optimization. The Combustion Equipment space Conditioning Technology program currently deals exclusively with residential and small commercial building oil heat technology.

  9. Current Developments in Cognitive Linguistics

    Institute of Scientific and Technical Information of China (English)

    Dirk Geeraerts

    2008-01-01

    After 30 years of theoretical development, we need to address the question whether the internal evolution of Cognitive Linguistics can be synthesized: what are the fundamental underlying trends in Cognitive Linguistics, and how do they shape the current developments within Cognitive Linguistics? This paper argues that Cognitive Linguistics is essentially characterized by a gradual recontextualization of the grammar. First, the development of 20th century grammar is characterized by a succession of a decontextualizing and a recontextualizing movement. Second, the various stages in the development of Cognitive Linguistics involve the gradual recovery of the various types of context that were discarded by generative grammar. These involve the experiential and embodied context of meaning in natural Language, the pragmatic context of actual language usage, and the social and cultural context of language as a shared code.

  10. Current particle and nanoparticle technology in Thailand

    Institute of Scientific and Technical Information of China (English)

    Wiwut Tanthapanichakoon

    2008-01-01

    This report gives a brief introduction to key Thai organizations, including research institutions and academic departments, active in particle technology. This is followed by a description of the latest trend of powder technology and nanoparticle technology in Thailand.

  11. Advanced Modular Inverter Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Adam Szczepanek

    2006-02-04

    Electric and hybrid-electric vehicle systems require an inverter to convert the direct current (DC) output of the energy generation/storage system (engine, fuel cells, or batteries) to the alternating current (AC) that vehicle propulsion motors use. Vehicle support systems, such as lights and air conditioning, also use the inverter AC output. Distributed energy systems require an inverter to provide the high quality AC output that energy system customers demand. Today's inverters are expensive due to the cost of the power electronics components, and system designers must also tailor the inverter for individual applications. Thus, the benefits of mass production are not available, resulting in high initial procurement costs as well as high inverter maintenance and repair costs. Electricore, Inc. (www.electricore.org) a public good 501 (c) (3) not-for-profit advanced technology development consortium assembled a highly qualified team consisting of AeroVironment Inc. (www.aerovironment.com) and Delphi Automotive Systems LLC (Delphi), (www.delphi.com), as equal tiered technical leads, to develop an advanced, modular construction, inverter packaging technology that will offer a 30% cost reduction over conventional designs adding to the development of energy conversion technologies for crosscutting applications in the building, industry, transportation, and utility sectors. The proposed inverter allows for a reduction of weight and size of power electronics in the above-mentioned sectors and is scalable over the range of 15 to 500kW. The main objective of this program was to optimize existing AeroVironment inverter technology to improve power density, reliability and producibility as well as develop new topology to reduce line filter size. The newly developed inverter design will be used in automotive and distribution generation applications. In the first part of this program the high-density power stages were redesigned, optimized and fabricated. One of the main

  12. Development of sodium technology

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Sung Tai; Nam, H. Y.; Choi, Y. D. [and others

    2000-05-01

    The objective of present study is to produce the experimental data for development and verification of computer codes for development of LMR and to develop the preliminary technologies for the future large scale verification experiments. A MHD experimental test loop has been constructed for the quantitative analysis of the effect of magnetic field on the sodium flow and experiments are carried out for three EM pumps. The previous pressure drop correlations are evaluated using the experimental data obtained from the pressure drop experiment in a 19-pin fuel assembly with wire spacer. An dimensionless variable is proposed to describe the amplitude and frequency of the fluctuation of free surface using the experimental data obtained from free surface experimental apparatus and an empirical correlation is developed using this dimensionless variable. An experimental test loop is constructed to measure the flow characteristics in IHX shell side and the local pressure drop in fuel assembly, and to test the vibration behaviour of fuel pins due to flow induced vibration. The sodium two-phase flow measuring technique using the electromagnetic flowmeter is developed and the sodium differential pressure drop measuring technique using the method of direct contact of sodium and oil is established. The work on the analysis of sodium fire characteristics and produce data for vlidation of computer code is performed. Perfect reopen time of self plugged leak path was observed to be about 130 minutes after water leak initiation. Reopen shape of a specimen appeared to be double layer of circular type, and reopen size of this specimen surface was about 2mm diameter on sodium side. In small water leakage experiments, the following correlation equation about the reopen time between sodium temperature and initial leak rate was obtained, {tau}{sub c} = {delta}{center_dot}g{sup -0.83}{center_dot}10{sup (3570/T{sub Na}-3.34)}, in 400-500 deg C of liquid sodium atmosphere. The characteristics

  13. Technology Development of Safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ho Dong; Kang, H. Y.; Ko, W. I. (and others)

    2007-04-15

    The objective of this project is to perform R and D on the essential technologies in nuclear material measurement and surveillance and verification system, and to improve the state of being transparent on the nuclear material management of DUPIC Fuel Development Facility (DFDF) through the evaluation of safeguard ability on non-proliferation fuel cycle and nuclear proliferation resistance. Nuclear material position scan system for the reduction of measurement error was developed for the spatial distribution search of spent fuel in DUPIC facility. Web-based realtime remote monitoring system was designed and constructed for satisfying the IAEA's performance criteria of continuous monitoring, and also developed a software for the function of remote control and message. And diversion paths in a proliferation resistant pyroprocess for SFR were analyzed and its protecting system against the diversion paths were suggested for enhancing proliferation resistance of advanced nuclear fuel cycle. These results could be used for planning the further R and D items in the area of safeguards. Those R and D results mentioned above would be helpful for increasing Korean nuclear transparency in the future.

  14. Developments in lubricant technology

    CERN Document Server

    Srivastava, S P

    2014-01-01

    Provides a fundamental understanding of lubricants and lubricant technology including emerging lubricants such as synthetic and environmentally friendly lubricants Teaches the reader to understand the role of technology involved in the manufacture of lubricants Details both major industrial oils and automotive oils for various engines Covers emerging lubricant technology such as synthetic and environmentally friendly lubricants Discusses lubricant blending technology, storage, re-refining and condition monitoring of lubricant in equipment

  15. MELTED BUTTER TECHNOLOGY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    L. V. Golubeva

    2014-01-01

    Full Text Available Summary. Melted butter is made from dairy butter by rendering the fat phase. It has specific taste and aroma, high-calorie content and good assimilability. Defects of butter which appeared during the storage causes by the development of microbiological processes or by the chemical oxidation. On the development of these processes influence quality and composition of fresh butter, its physical structure, content of the increased amount of gas phase and content of heavy metals, storage conditions. Microbiological spoilage of butter occurs generally due to damage of plasma which is good environment for the development of microorganisms. Defects of microbiological origin include: unclean, sour, moldy, yeasty, cheesy, bitter taste. Defects of test and smell chemical origin are formed due to hydrolytic digestion of lipids. It's prevailed at long storage of butter in the conditions of freezing temperatures. It's picked out the following main processes of spoiling: souring, acidifying and sallowness. Often these processes take place simultaneously.It has been investigated melted butter with lactated additive. The latter improves the microbiological and toxicological safety, prolongs the storage condition of the products. Technological efficiency of the additives is achieved by a multilayer products formation from the inactive bound water, preventing microorganisms growth and by the barrier layer with lactate inhibiting hydrolytic reactions. Oil samples were obtained with the batch-type butter maker application, then they were melted and after that lactated additive were supplemented. It has been studied organoleptic and physico-chemical indices of the melted butter samples. The fatty-acid composition of melted butter were studied. Comparative analysis of fatty-acid composition of cow's milk fat and produced melted butter has shown their similarity. Also in the last sample there is increased weight fraction of linoleic and linolenic acids. The obtained

  16. Irradiated foods: current trends and technologies

    Science.gov (United States)

    Additional demands on keeping food safe and palatable through longer distribution chains have led industry executives to reconsider irradiation and other technologies as viable processing alternatives for many foods. Other intervention technologies (precision thermal, UV, and novel sanitizer formula...

  17. 论现今地质测绘技术与发展%Discussion on Current Geological Mapping Technology and Development

    Institute of Scientific and Technical Information of China (English)

    孙志鹏; 王文龙

    2012-01-01

    介绍了测绘技术的基本概念,并通过传统地质测绘与当代地质测绘的比较,重点介绍了新时期地质测绘的几种技术,并探讨了地质测绘的发展趋势.%In this paper, the basic concepts of topographic technique is introduced, by the comparison of traditional geological mapping and contemporary geological mapping, several technologies of geological mapping in the new era are mainly described, and the development trend of the geological mapping is explored.

  18. China's Spacecraft Technology Developing Steadily

    Institute of Scientific and Technical Information of China (English)

    Ren Shufang

    2008-01-01

    @@ 2008 sees the 40th anniversary of China Academy of Space Technology (CAST).As the main satellite manufacture base,CAST has overcome many difficulties in the field of space technology,achieved project approval for several major space science and technology programs,and made many breakthroughs in core technologies and key technologies with its own intellectual property rights in 40 years development.

  19. 微铣加工关键技术研究现状与发展%Current Situation and Development of Micro-milling Key Technologies

    Institute of Scientific and Technical Information of China (English)

    高成秀; 贾振元; 卢晓红

    2012-01-01

    Application of the micro-milling technology on the three dimensional precision micro parts manufacturing led to a major technological change in micro manufacturing. Different from MEMS technology and the ultra precision processing technology, it is an effective way for micron-scale micro and intermediate parts with high efficiency, high-precision micro-manufacturing, which is use of traditional milling methods and has unique advantages such as the diversity of workpiece materials and the realization of machining 3D surface. Based on the summary of a lot of literature in our and foreign countries, this thesis summarizes the studies on the research and development of micro milling machine, surface topography , surface roughness, burr of and micro tool wear in micro-milling process. The deficiency of study on the concern technologies of micro milling and the development perspective of this field have been pointed out.%微铣削加工技术在精密三维微小零件制造中的应用,引发了微细制造领域的重大技术变革,其区别于MEMS技术和超精密加工技术,是利用传统铣削加工方式并针对微米和中间尺度微小零件进行高效率、高精度微细制造的有效途径,具有加工材料的多样性和能实现三维曲面加工的独特优势.论文通过综合国内外大量文献,对微铣床设备研发、微铣削表面形貌、表面粗糙度与微毛刺及微铣刀具磨损等进行讨论,指出微铣削加工相关技术研究存在的不足并对该领域的发展提出自己的观点.

  20. Nigerian Journal of Technological Development

    African Journals Online (AJOL)

    The Nigerian Journal of Technological Development is a biannual publication of the Faculty of Engineering & Technology, University of Ilorin, Ilorin, Nigeria. ... Mechanical properties of millet husk ash bitumen stabilized soil block · EMAIL ...

  1. China's High-technology Standards Development

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    There are several major technology standards, including audio video coding (AVS), automotive electronics, third generation (3G) mobile phones, mobile television, wireless networks and digital terrestrial television broadcasting, that have been released or are currently under development in China. This article offers a detailed analysis of each standard and studies their impact on China's high-technology industry.

  2. Current Renewable Energy Technologies and Future Projections

    Energy Technology Data Exchange (ETDEWEB)

    Allison, Stephen W [ORNL; Lapsa, Melissa Voss [ORNL; Ward, Christina D [ORNL; Smith, Barton [ORNL; Grubb, Kimberly R [ORNL; Lee, Russell [ORNL

    2007-05-01

    The generally acknowledged sources of renewable energy are wind, geothermal, biomass, solar, hydropower, and hydrogen. Renewable energy technologies are crucial to the production and utilization of energy from these regenerative and virtually inexhaustible sources. Furthermore, renewable energy technologies provide benefits beyond the establishment of sustainable energy resources. For example, these technologies produce negligible amounts of greenhouse gases and other pollutants in providing energy, and they exploit domestically available energy sources, thereby reducing our dependence on both the importation of fossil fuels and the use of nuclear fuels. The market price of renewable energy technologies does not reflect the economic value of these added benefits.

  3. The current state of FPGA technology in the nuclear domain

    Energy Technology Data Exchange (ETDEWEB)

    Ranta, J.

    2012-07-01

    Field programmable gate arrays are a form of programmable electronic device used in various applications including automation systems. In recent years, there has been a growing interest in the use of FPGA-based systems also for safety automation of nuclear power plants. The interest is driven by the need for reliable new alternatives to replace, on one hand, the aging technology currently in use and, on the other hand, microprocessor and software-based systems, which are seen as overly complex from the safety evaluation point of view. This report presents an overview of FPGA technology, including hardware aspects, the application development process, risks and advantages of the technology, and introduces some of the current systems. FPGAs contain an interesting combination of features from software-based and fully hardware-based systems. Application development has a great deal in common with software development, but the final product is a hardware component without the operating system and other platform functions on which software would execute. Currently the number of FPGA-based applications used for safety functions of nuclear power plants is rather limited, but it is growing. So far there is little experience or common solid understanding between different parties on how FPGAs should be evaluated and handled in the licensing process. (orig.)

  4. Sustainable development - billions of watts under the seas - Marine current turbines play simple - Technological waves; Developpement durable - Des milliards de watts sous les mers - Les hydroliennes jouent la simplicite - Vagues technologiques

    Energy Technology Data Exchange (ETDEWEB)

    Lucas, Th.

    2011-10-27

    The author evokes the opportunities of power generation by the development of sea current or tidal stream turbines. Some developments are already tested by Norwegian, French, Danish, British and American companies. Some specific turbines are briefly presented. In order to reduce the cost of the electricity production from sea currents, manufacturers are using simple and robust technologies, and exploit the experience gained on wind turbines. Some designs and prototypes are evoked for the production of electricity by sea waves (Pelamis and Oyster projects). Principles, strengths and production projects are briefly indicated. The challenge of maintenance in sea environment is outlined for these projects

  5. Lunar Surface Systems Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony; Meseroll, Robert; Quiter, John; Shannon, Russell; Easton, John W.; Madaras, Eric I.; BrownTaminger, Karen M.; Tabera, John T.; Tellado, Joseph; Williams, Marth K.; Zeitlin, Nancy P.

    2011-01-01

    The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.

  6. Space Technology Mission Directorate: Game Changing Development

    Science.gov (United States)

    Gaddis, Stephen W.

    2015-01-01

    NASA and the aerospace community have deep roots in manufacturing technology and innovation. Through it's Game Changing Development Program and the Advanced Manufacturing Technology Project NASA develops and matures innovative, low-cost manufacturing processes and products. Launch vehicle propulsion systems are a particular area of interest since they typically comprise a large percentage of the total vehicle cost and development schedule. NASA is currently working to develop and utilize emerging technologies such as additive manufacturing (i.e. 3D printing) and computational materials and processing tools that could dramatically improve affordability, capability, and reduce schedule for rocket propulsion hardware.

  7. Current development of biorefinery in China.

    Science.gov (United States)

    Tan, Tianwei; Shang, Fei; Zhang, Xu

    2010-01-01

    To meet the demand of its fast growing economy, China has become already the second largest buyer of crude oil. China is facing critical problems of energy shortage and environment deterioration. Rational and efficient energy use and environment protection are both getting more attention in China. Biomass energy is renewable energy made from biological sources. China's biomass resources are abundant, which could provide energy for future social and economic development. However technologies for biomass resource conversion in China are still just beginning. In this paper, current biomass resource distribution and technologies of biomass energy, including power generation, biofuel production and biomass-based chemical production are reviewed. Copyright 2010 Elsevier Inc. All rights reserved.

  8. Lunar Dust Mitigation Technology Development

    Science.gov (United States)

    Hyatt, Mark J.; Deluane, Paul B.

    2008-01-01

    NASA s plans for implementing the Vision for Space Exploration include returning to the moon as a stepping stone for further exploration of Mars, and beyond. Dust on the lunar surface has a ubiquitous presence which must be explicitly addressed during upcoming human lunar exploration missions. While the operational challenges attributable to dust during the Apollo missions did not prove critical, the comparatively long duration of impending missions presents a different challenge. Near term plans to revisit the moon places a primary emphasis on characterization and mitigation of lunar dust. Comprised of regolith particles ranging in size from tens of nanometers to microns, lunar dust is a manifestation of the complex interaction of the lunar soil with multiple mechanical, electrical, and gravitational effects. The environmental and anthropogenic factors effecting the perturbation, transport, and deposition of lunar dust must be studied in order to mitigate it s potentially harmful effects on exploration systems. This paper presents the current perspective and implementation of dust knowledge management and integration, and mitigation technology development activities within NASA s Exploration Technology Development Program. This work is presented within the context of the Constellation Program s Integrated Lunar Dust Management Strategy. The Lunar Dust Mitigation Technology Development project has been implemented within the ETDP. Project scope and plans will be presented, along with a a perspective on lessons learned from Apollo and forensics engineering studies of Apollo hardware. This paper further outlines the scientific basis for lunar dust behavior, it s characteristics and potential effects, and surveys several potential strategies for its control and mitigation both for lunar surface operations and within the working volumes of a lunar outpost.

  9. Current challenges in autonomous vehicle development

    Science.gov (United States)

    Connelly, J.; Hong, W. S.; Mahoney, R. B., Jr.; Sparrow, D. A.

    2006-05-01

    The field of autonomous vehicles is a rapidly growing one, with significant interest from both government and industry sectors. Autonomous vehicles represent the intersection of artificial intelligence (AI) and robotics, combining decision-making with real-time control. Autonomous vehicles are desired for use in search and rescue, urban reconnaissance, mine detonation, supply convoys, and more. The general adage is to use robots for anything dull, dirty, dangerous or dumb. While a great deal of research has been done on autonomous systems, there are only a handful of fielded examples incorporating machine autonomy beyond the level of teleoperation, especially in outdoor/complex environments. In an attempt to assess and understand the current state of the art in autonomous vehicle development, a few areas where unsolved problems remain became clear. This paper outlines those areas and provides suggestions for the focus of science and technology research. The first step in evaluating the current state of autonomous vehicle development was to develop a definition of autonomy. A number of autonomy level classification systems were reviewed. The resulting working definitions and classification schemes used by the authors are summarized in the opening sections of the paper. The remainder of the report discusses current approaches and challenges in decision-making and real-time control for autonomous vehicles. Suggested research focus areas for near-, mid-, and long-term development are also presented.

  10. 纵向电流感应加热技术的研究与应用%Development and Application of Longitudinal Current Induction Heating Technology

    Institute of Scientific and Technical Information of China (English)

    邢志松; 高新宇; 倪丽闪

    2014-01-01

    The step of stepped part is difficult to be well induction hardened with conventional ring inductor .A new type of longitudinal current inductor has been developed in successfully developed in Tianjin Heat Treatment Institute Co., Ltd., consequently the above problem has been solved .The stepped drag chain wheel of QT 600 nodular iron has been medium-frequency induction hardened with the longitudinal current inductor , as a result, the hardness and case depth in both the step and the flange have conformed with the requirements .%阶梯式零件的台阶部位采用普通圆环形感应器难以获得良好的感应淬硬效果。天津市热处理研究所有限公司研制了一种新型纵向电流感应器,从而解决了这一问题。采用纵向电流感应器对带台阶的QT600球墨铸铁制拖链轮进行了中频感应淬火,结果表明拖链轮的轮缘和台阶处硬度及硬化层深度均达到了技术要求。

  11. Robotics Technology Development Program. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Robotics Technology Development Program (RTDP) is a ``needs-driven`` effort. A lengthy series of presentations and discussions at DOE sites considered critical to DOE`s Environmental Restoration and Waste Management (EM) Programs resulted in a clear understanding of needed robotics applications toward resolving definitive problems at the sites. A detailed analysis of the Tank Waste Retrieval (TWR), Contaminant Analysis Automation (CAA), Mixed Waste Operations (MWO), and Decontamination & Dismantlement (D&D). The RTDP Group realized that much of the technology development was common (Cross Cutting-CC) to each of these robotics application areas, for example, computer control and sensor interface protocols. Further, the OTD approach to the Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) process urged an additional organizational break-out between short-term (1--3 years) and long-term (3--5 years) efforts (Advanced Technology-AT). The RDTP is thus organized around these application areas -- TWR, CAA, MWO, D&D and CC&AT -- with the first four developing short-term applied robotics. An RTDP Five-Year Plan was developed for organizing the Program to meet the needs in these application areas.

  12. Current status and development of coal geophysical technology in China%中国煤炭物探技术的现状与发展

    Institute of Scientific and Technical Information of China (English)

    程建远; 石显新

    2013-01-01

    6 prominent progresses and developments had been made in coal and mine geophysical technique in recent years,namely popularization for 3D seismic application; seismic data fine processing and interpretation dynamically;new spanning has been taken from structural to lithological explanation for seismic; ground TEM technology has been widely used; attention was regained for underground geophysics and innovations have been achieved for embedded labeled service mode has been used in coal mine safety production guarantee.By making the comparison between China and oversea technological levels in coal geophysics,the shortcomings had been pointed out and suggestions on how to improve geophysical technology in China had been put forward.In the end,outlooks for future geophysical technique and equipment were predicted in the paper.%总结了近年来我国煤田物探与矿井物探技术的6大突出进展,即三维地震应用领域不断扩大、地震资料精细处理与动态解释得到推广、地震勘探正在实现从构造勘探向岩性勘探的跨越、地面瞬变电磁技术得到广泛应用、矿井物探技术重新得到重视、以“嵌入式”服务为标志的煤矿安全生产地质保障模式出现了可喜创新等;通过与国内外同类技术发展水平的对比分析,找出了我们存在的差距,提出了加快我国煤炭物探技术发展的对策与建议,并对今后煤炭物探技术与装备的发展前景进行了展望.

  13. DoD Current State for Software Technology Readiness Assessments

    Science.gov (United States)

    2010-04-01

    DoD Current State for Software Technology Readiness Assessments Systems & Software Technology Conference April 2010 Cynthia Dion-Schwarz, Ph.D...DoD Current State for Software Technology Readiness Assessments 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d...public release; distribution unlimited 13. SUPPLEMENTARY NOTES Presented at the 22nd Systems and Software Technology Conference (SSTC), 26-29 April

  14. New Space Technology Development

    Science.gov (United States)

    Mueller, Rob

    2014-01-01

    Visitors from Moon Express, a privately funded commercial space company, will be visiting KSC Swamp Works. This presentation includes a high-level introduction to NASA and commercial partnerships, as well as brief background on the moon - what we used to think about it hundreds of years ago, and what we know today with advanced technologies.***This third part being added includes Swamp Works technical capabilities and has a high-level overview of a selection of projects.***

  15. Chemical technology for appropriate development

    NARCIS (Netherlands)

    Van Brakel, J.

    1978-01-01

    'Chemical technology for appropriate development' is basicly a critical review of the literature. It gives a conceptual analysis of so called appropriate technology and the choice of production systems for less-development countries. The role of about 40 organizations active in this emerging field

  16. Nanofluid technology : current status and future research.

    Energy Technology Data Exchange (ETDEWEB)

    Choi, S. U.-S.

    1998-10-20

    Downscaling or miniaturization has been a recent major trend in modern science and technology. Engineers now fabricate microscale devices such as microchannel heat exchangers, and micropumps that are the size of dust specks. Further major advances would be obtained if the coolant flowing in the microchannels were to contain nanoscale particles to enhance heat transfer. Nanofluid technology will thus be an emerging and exciting technology of the 21st century. This paper gives a brief history of the Advanced Fluids Program at Argonne National Laboratory (ANL), discusses the concept of nanofluids, and provides an overview of the R and D program at ANL on the production, property characterization, and performance of nanofluids. It also describes examples of potential applications and benefits of nanofluids. Finally, future research on the fundamentals and applications of nanofluids is addressed.

  17. Development of inherent technologies for advanced PWR core - A study on the current status and the construction feasibility of critical facilities

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Won Sik; Yang, Hyun Seok [Chosun University, Kwangju (Korea); Kim, Chang Hyo; Shim, Hyung Jin [Seoul National University, Seoul (Korea)

    1999-03-01

    The objective of this study is to examine the appropriateness of constructing critical facilities in our country and to decide a course of constructing them if necessary by surveying the status and utilization of foreign facilities and by investigating the demand for domestic facilities. We investigated the status and the utilization of foreign critical facilities through literature survey and personal visitation. In our judgement, critical facilities are necessary for developing the advanced reactors and fuels which are being studied as parts of the Nuclear R and D Program by MOST. Considering the construction cost and the current state of domestic economy, however, it is unjustifiable to build three different types of critical facilities (the light water, the heavy water, and the fast critical facility). It appears to be reasonable to build a light water critical, considering the construction cost, degree of utilization, and other constraints. (author). 89 refs., 134 figs., 64 tabs.

  18. Technological development in fisheries management

    DEFF Research Database (Denmark)

    Eigaard, Ole Ritzau; Marchal, Paul; Gislason, Henrik

    2014-01-01

    increases by 3.2% per year due to technological developments, an increase often ignored in fisheries management. The documentation and quantification of technological creep improves the basis for successfully integrating the effects of technological development (and catchability changes) in fisheries...... management regulations and policies. Ways of counteracting the undesired effects of technological creep are discussed as are the potential management benefits from improved fishing technology. Specific suggestions are given on the selection, application, and tuning of fisheries management tools that can......Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism...

  19. 当前智慧物流技术发展趋势分析%The Current Wisdom Logistics Technology Development Trend Analysis

    Institute of Scientific and Technical Information of China (English)

    谭华; 林克; 杨少龙; 吴飞

    2016-01-01

    为促进智慧物流的发展,从当前“工业4.0”、“互联网+”、“大众创业、万众创新”等人们关注的热点角度来分析智慧物流的行业特征、关键应用、信息化演进变化等,重点对物联网技术在物流行业的主要应用场景进行分析,其中对物联网新技术NB-IoT、无人机以及大数据在物流中的新应用进行介绍,从技术层面探讨分析智慧物流的发展趋势。%In order to promote the development of smart logistics, industry characteristics, key applications and informatization evolution of smart logistics were analyzed from aspects of hot spots at present of "Industry 4.0" and "Internet +", "public entrepreneurship, innovation”. In addition, the main application scenes of IoT technology in logistics industry were mainly discussed. New applications of new NB-IoT, unmanned plane and big data were introduced. The developmental trend of smart logistics was elaborated from technical perspective.

  20. Two Phase Technology Development Initiatives

    Science.gov (United States)

    Didion, Jeffrey R.

    1999-01-01

    Three promising thermal technology development initiatives, vapor compression thermal control system, electronics cooling, and electrohydrodynamics applications are outlined herein. These technologies will provide thermal engineers with additional tools to meet the thermal challenges presented by increased power densities and reduced architectural options that will be available in future spacecraft. Goddard Space Flight Center and the University of Maryland are fabricating and testing a 'proto- flight' vapor compression based thermal control system for the Ultra Long Duration Balloon (ULDB) Program. The vapor compression system will be capable of transporting approximately 400 W of heat while providing a temperature lift of 60C. The system is constructed of 'commercial off-the-shelf' hardware that is modified to meet the unique environmental requirements of the ULDB. A demonstration flight is planned for 1999 or early 2000. Goddard Space Flight Center has embarked upon a multi-discipline effort to address a number of design issues regarding spacecraft electronics. The program addressed the high priority design issues concerning the total mass of standard spacecraft electronics enclosures and the impact of design changes on thermal performance. This presentation reviews the pertinent results of the Lightweight Electronics Enclosure Program. Electronics cooling is a growing challenge to thermal engineers due to increasing power densities and spacecraft architecture. The space-flight qualification program and preliminary results of thermal performance tests of copper-water heat pipes are presented. Electrohydrodynamics (EHD) is an emerging technology that uses the secondary forces that result from the application of an electric field to a flowing fluid to enhance heat transfer and manage fluid flow. A brief review of current EHD capabilities regarding heat transfer enhancement of commercial heat exchangers and capillary pumped loops is presented. Goddard Space Flight

  1. Consuming technologies - developing routines

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2008-01-01

    Routines in daily life are crucial for consumption by households of energy and water and therefore knowledge of how routines develop and change is extremely relevant from a sustainable consumption perspective. Routines emerge, develop and change in close relation with different kinds of everyday ...

  2. 浅谈水平井钻井技术现状及发展方向%Discussion on Current Situation and Development Direction of Horizontal Well Drilling Technology

    Institute of Scientific and Technical Information of China (English)

    张琦

    2015-01-01

    水平井钻井技术的发展对油井产量提高以及油田采收率提高都起到了至关重要的作用,水平井钻井技术的出现是石油钻井技术方面重大的突破。本文结合对国内外水平井钻井技术的现状分析,使我们充分了解到国内技术的差距,以便我们在今后技术改进方面有一个方向。%The development of horizontal well drilling technology plays an important role in improving the output of oil well and improving oil recovery efficiency, and the appearance of horizontal well drilling technology is a major breakthrough in oil drilling technology. Combined with the current situation of horizontal well drilling technology in the domestic and foreign, this paper enables us to fully understand the domestic technology gap which is for our technological improvements in the future.

  3. Taiwan Perspective: Developing Smart Living Technology

    Directory of Open Access Journals (Sweden)

    Chih-Kung Lee

    2011-09-01

    Full Text Available The pursuit of Smart Living Technology is a recent trend in which technology is applied to daily life to increase efficiency, affordability and sustainability. The principle behind Smart Living Technology is that technology should be used to advance the needs of human beings and to increase the quality of life by the power of human creativity while at the same time sustaining the environment for future generations. As such, intelligent networks should be adopted to provide humans with full information to control an individual’s personal environment. Wireless technology can play a key role in enabling smart energy monitoring by allowing consumers to make more informed choices and to connect products and devices to a coordinated management system. The development of Smart Living Technology is based on the concept of user driven innovations. Various Living Labs have been established around the world as development centers for extension of this Smart Living Technology. In this paper, the background and current developments of Smart Living Technology are reviewed, followed by real examples taking place in Taiwan. Finally, the focus and future plan for Taiwan are discussed including a strategy for further development of Smart Living Technology in Taiwan.

  4. AND TECHNOLOGY FOR NATIONAL DEVELOPMENT

    African Journals Online (AJOL)

    women should be part and parcel of her science and technology development. Nige- rian's effort .... based courses in University of Nigeria alone in 2000/2003 session. University of. 19 .... der, physical disability, limited English language ability.

  5. Multichip module technology development

    Energy Technology Data Exchange (ETDEWEB)

    Kapustinsky, J.S.; Boissevain, J.G.; Muck, R.C.; Smith, G.D.; Wong-Swanson, B.G.; Ziock, H.J.

    1997-10-01

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). A Multichip Module (MCM) was designed and submitted for fabrication to the Lockheed Martin foundry using a licensed process called High Density Interconnect (HDI). The HDI process uses thin film techniques to create circuit interconnect patterns on multiple layers of dielectric film which are deposited directly on top of unpackaged electronic die. This results in an optimally small package that approaches the area of the bare die themselves. This project tested the capability of the Lockheed Martin foundry to produce, in an HDI process, a complex mixed-mode (analog and digital) circuit on a single MCM substrate.

  6. Insensitive control technology development

    Science.gov (United States)

    Harvey, C. A.; Pope, R. E.

    1978-01-01

    THe investigation of two insensitive controller synthesis techniques was reported. The finite dimensional inverse approach produces a time varying insensitive controller and/or parameter identifier by constructing inverse functions derived from a finite number of input output pair relationships. The MD/IM concept relies on the information matrix theory that was developed in the estimation and identification field. The MD/IM synthesis technique is based on the hypothesis that minimizing the information matrix will reduce system identifiability and consequently system sensitivity to uncertain parameters. The controllers designed with both techniques were evaluated on a realistic C-5A aircraft flight control problem. Results indicate that the FDI controller is more suited to trajectory type problems because of its time varying nature. The MD/IM controller performed as well as the top-rated controllers of the initial effort and has direct application to aircraft flight control problems.

  7. Cryogenic Fluid Management Technology Development Roadmaps

    Science.gov (United States)

    Stephens, J. R.; Johnson, W. L.

    2017-01-01

    Advancement in Cryogenic Fluid Management (CFM) Technologies is essential for achieving NASA's future long duration missions. Propulsion systems utilizing cryogens are necessary to achieve mission success. Current State Of the Art (SOA) CFM technologies enable cryogenic propellants to be stored for several hours. However, some envisioned mission architectures require cryogens to be stored for two years or longer. The fundamental roles of CFM technologies are long term storage of cryogens, propellant tank pressure control and propellant delivery. In the presence of heat, the cryogens will "boil-off" over time resulting in excessive pressure buildup, off-nominal propellant conditions, and propellant loss. To achieve long term storage and tank pressure control, the CFM elements will intercept and/or remove any heat from the propulsion system. All functions are required to perform both with and without the presence of a gravitational field. Which CFM technologies are required is a function of the cryogens used, mission architecture, vehicle design and propellant tank size. To enable NASA's crewed mission to the Martian surface, a total of seventeen CFM technologies have been identified to support an In-Space Stage and a Lander/Ascent Vehicle. Recognizing that FY2020 includes a Decision Point regarding the In-Space Stage Architecture, a set of CFM Technology Development Roadmaps have been created identifying the current Technology Readiness Level (TRL) of each element, current technology "gaps", and existing technology development efforts. The roadmaps include a methodical approach and schedule to achieve a flight demonstration in FY2023, hence maturing CFM technologies to TRL 7 for infusion into the In-Space Stage Preliminary Design.

  8. Arctic Energy Technology Development Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Sukumar Bandopadhyay; Charles Chamberlin; Robert Chaney; Gang Chen; Godwin Chukwu; James Clough; Steve Colt; Anthony Covescek; Robert Crosby; Abhijit Dandekar; Paul Decker; Brandon Galloway; Rajive Ganguli; Catherine Hanks; Rich Haut; Kristie Hilton; Larry Hinzman; Gwen Holdman; Kristie Holland; Robert Hunter; Ron Johnson; Thomas Johnson; Doug Kame; Mikhail Kaneveskly; Tristan Kenny; Santanu Khataniar; Abhijeet Kulkami; Peter Lehman; Mary Beth Leigh; Jenn-Tai Liang; Michael Lilly; Chuen-Sen Lin; Paul Martin; Pete McGrail; Dan Miller; Debasmita Misra; Nagendra Nagabhushana; David Ogbe; Amanda Osborne; Antoinette Owen; Sharish Patil; Rocky Reifenstuhl; Doug Reynolds; Eric Robertson; Todd Schaef; Jack Schmid; Yuri Shur; Arion Tussing; Jack Walker; Katey Walter; Shannon Watson; Daniel White; Gregory White; Mark White; Richard Wies; Tom Williams; Dennis Witmer; Craig Wollard; Tao Zhu

    2008-12-31

    The Arctic Energy Technology Development Laboratory was created by the University of Alaska Fairbanks in response to a congressionally mandated funding opportunity through the U.S. Department of Energy (DOE), specifically to encourage research partnerships between the university, the Alaskan energy industry, and the DOE. The enabling legislation permitted research in a broad variety of topics particularly of interest to Alaska, including providing more efficient and economical electrical power generation in rural villages, as well as research in coal, oil, and gas. The contract was managed as a cooperative research agreement, with active project monitoring and management from the DOE. In the eight years of this partnership, approximately 30 projects were funded and completed. These projects, which were selected using an industry panel of Alaskan energy industry engineers and managers, cover a wide range of topics, such as diesel engine efficiency, fuel cells, coal combustion, methane gas hydrates, heavy oil recovery, and water issues associated with ice road construction in the oil fields of the North Slope. Each project was managed as a separate DOE contract, and the final technical report for each completed project is included with this final report. The intent of this process was to address the energy research needs of Alaska and to develop research capability at the university. As such, the intent from the beginning of this process was to encourage development of partnerships and skills that would permit a transition to direct competitive funding opportunities managed from funding sources. This project has succeeded at both the individual project level and at the institutional development level, as many of the researchers at the university are currently submitting proposals to funding agencies, with some success.

  9. APPLICATIONS OF CURRENT TECHNOLOGY FOR CONTINUOUS MONITORING OF SPENT FUEL

    Energy Technology Data Exchange (ETDEWEB)

    Drayer, R.

    2013-06-09

    Advancements in technology have opened many opportunities to improve upon the current infrastructure surrounding the nuclear fuel cycle. Embedded devices, very small sensors, and wireless technology can be applied to Security, Safety, and Nonproliferation of Spent Nuclear Fuel. Security, separate of current video monitoring systems, can be improved by integrating current wireless technology with a variety of sensors including motion detection, altimeter, accelerometer, and a tagging system. By continually monitoring these sensors, thresholds can be set to sense deviations from nominal values. Then alarms or notifications can be activated as needed. Safety can be improved in several ways. First, human exposure to ionizing radiation can be reduced by using a wireless sensor package on each spent fuel cask to monitor radiation, temperature, humidity, etc. Since the sensor data is monitored remotely operator stay-time is decreased and distance from the spent fuel increased, so the overall radiation exposure is reduced as compared to visual inspections. The second improvement is the ability to monitor continuously rather than periodically. If changes occur to the material, alarm thresholds could be set and notifications made to provide advanced notice of negative data trends. These sensor packages could also record data to be used for scientific evaluation and studies to improve transportation and storage safety. Nonproliferation can be improved for spent fuel transportation and storage by designing an integrated tag that uses current infrastructure for reporting and in an event; tracking can be accomplished using the Iridium satellite system. This technology is similar to GPS but with higher signal strength and penetration power, but lower accuracy. A sensor package can integrate all or some of the above depending on the transportation and storage requirements and regulations. A sensor package can be developed using off the shelf technology and applying it to each

  10. Working Environment and Technological Development

    DEFF Research Database (Denmark)

    Clausen, Christian; Nielsen, Klaus T.; Jensen, Per Langaa

    1997-01-01

    The paper describes the purpose, themes, overarching research questions and specific projects of the programme: Working Environment and Technological Development. The major research themes are:1) Management concepts and the working environment, which considers the visions and their and their conc......The paper describes the purpose, themes, overarching research questions and specific projects of the programme: Working Environment and Technological Development. The major research themes are:1) Management concepts and the working environment, which considers the visions...... and their and their concept of working environment2) Technology renewal, which considers the role of the working environment in connection with the development and use of concrete technologies3) Working environment planning, which considers the existing efforts to place the working environment in a planning process....

  11. Current Status on Resource and Recycling Technology for Rare Earths

    Science.gov (United States)

    Takeda, Osamu; Okabe, Toru H.

    2014-06-01

    The development of recycling technologies for rare earths is essential for resource security and supply stability because high-quality rare earth mines are concentrated in China and the demand for rare earth metals such as neodymium and dysprosium, used as raw materials in permanent magnets (neodymium magnet), is expected to increase rapidly in the near future. It is also important to establish a recycling-based society from the perspective of the conservation of finite and valuable mineral resources and the reduction of the environmental load associated with mining and smelting. In this article, the current status of rare earth resource as well as that of recycling technology for the magnets is reviewed. The importance of establishing an efficient recycling process for rare earths is discussed from the characteristics of supply chain of rare earths, and the technological bases of the recycling processes for the magnet are introduced. Further, some fundamental researches on the development of new recycling processes based on pyrometallurgical process are introduced, and the features of the recycling processes are evaluated.

  12. Recommendations for Radiologic Technology Workforce Development.

    Science.gov (United States)

    Collins, Dale E.

    A literature review was conducted to establish criteria for the development and establishment of an associate degree program in radiologic technology in Alaska, where traditional education programs had been slow to respond to the current personnel shortage. The information was obtained from a variety of state, regional, and national organizations…

  13. Module Technology: Current Practice and Issues (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Wohlgemuth, J.

    2010-10-05

    PV modules must provide mechanical support for the cells, protect the world from the voltages inside, protect the cells, diodes and interconnects from the weather outside, couple as much light as possible into the PV cells and minimize the temperature increase of the cells. The package must continue to serve these functions for at least 25 years as that is the typical module warranty period today. Furthermore the package must do all this for as low a cost as possible since the key to large scale PV growth is a reduction in cost while retaining excellent module reliability and durability. This paper will review current module construction practices for both crystalline silicon and thin film PV with emphasis on explaining why the present designs and materials have been selected. Possible long term issues with today's designs and materials will be discussed. Several proposed solutions to these issues will be presented, highlighting the research efforts that will be necessary in order to verify that they can cost effectively solve the identified issues.

  14. Current developments in canine genetics.

    Science.gov (United States)

    Marschall, Yvonne; Distl, Ottmar

    2010-01-01

    In recent years, canine genetics had made huge progress. In 1999 the first complete karyotype and ideogram of the dog was published. Several linkage and RH maps followed. Using these maps, sets of microsatellite markers for whole genome scans were compiled. In 2003 the sequencing of the DNA of a female Boxer began. Now the second version of the dog genome assembly has been put online, and recently, a microchip SNP array became available. Parallel to these developments, some causal mutations for different traits have been identified. Most of the identified mutations were responsible for monogenic canine hereditary diseases. With the tools available now, it is possible to use the advantages of the population structure of the various dog breeds to unravel complex genetic traits. Furthermore, the dog is a suitable model for the research of a large number of human hereditary diseases and particularly for cancer genetics, heart and neurodegenerative diseases. There are some examples where it was possible to benefit from the knowledge of canine genetics for human research. The search for quantitative trait loci (QTL), the testing of candidate genes and genome-wide association studies can now be performed in dogs. QTL for skeletal size variations and for canine hip dysplasia have been already identified and for these complex traits the responsible genes and their possible interactions can now be identified.

  15. Current status of health technology reassessment of non-drug technologies: survey and key informant interviews

    Directory of Open Access Journals (Sweden)

    Leggett Laura E

    2012-12-01

    Full Text Available Abstract Background Health Technology Reassessment (HTR is a structured, evidence-based assessment of the clinical, social, ethical and economic effects of a technology currently used in the health care system, to inform optimal use of that technology in comparison to its alternatives. Little is known about current international HTR practices. The objective of this research was to summarize experience-based information gathered from international experts on the development, initiation and implementation of a HTR program. Methods A mixed methods approach, using a survey and in-depth interviews, was adopted. The survey covered 8 concepts: prioritization/identification of potentially obsolete technologies; program development; implementation; mitigation; program championing; stakeholder engagement; monitoring; and reinvestment. Members of Health Technology Assessment International (HTAi and the International Network of Agencies for Health Technology Assessment (INAHTA formed the sampling frame. Participation was solicited via email and the survey was administered online using SurveyMonkey. Survey results were analyzed using descriptive statistics. To gather more in-depth knowledge, semi-structured interviews were conducted among organizations with active HTR programs. Interview questions were developed using the same 8 concepts. The hour-long interviews were recorded, transcribed and analyzed using constant comparative analysis. Results Ninety-five individuals responded to the survey: 49 were not discussing HTR, 21 were beginning to discuss HTR, nine were imminently developing a program, and 16 participants had programs and were completing reassessments. The survey results revealed that methods vary widely and that although HTR is a powerful tool, it is currently not being used to its full potential. Of the 16 with active programs, nine agreed to participate in follow-up interviews. Interview participants identified early and extensive stakeholder

  16. Titanium Aluminide Casting Technology Development

    Science.gov (United States)

    Bünck, Matthias; Stoyanov, Todor; Schievenbusch, Jan; Michels, Heiner; Gußfeld, Alexander

    2017-08-01

    Titanium aluminide alloys have been successfully introduced into civil aircraft engine technology in recent years, and a significant order volume increase is expected in the near future. Due to its beneficial buy-to-fly ratio, investment casting bears the highest potential for cost reduction of all competing production technologies for TiAl-LPTB. However, highest mechanical properties can be achieved by TiAl forging. In view of this, Access e.V. has developed technologies for the production of TiAl investment cast parts and TiAl die cast billets for forging purposes. While these parts meet the highest requirements, establishing series production and further optimizing resource and economic efficiency are present challenges. In order to meet these goals, Access has recently been certified according to aircraft standards, aiming at qualifying parts for production on technology readiness level 6. The present work gives an overview of the phases of development and certification.

  17. Development of Food Preservation and Processing Technologies by Radiation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  18. CURRENT TECHNOLOGY AND INNOVATIONS IN FREEZE SHAFT SINKING IN CHINA

    Institute of Scientific and Technical Information of China (English)

    张铭; 翁家杰; 夏正明

    1991-01-01

    This paper gives a brief review of the development of shaft sinking by artificial ground freezing since 1949 when new China was founded. Several shaft freezing schemes which have been successfully applied from the economic and safe viewpoints are presented. Current technology and some innovative techniques,especially the shah lining which have experienced major improvements over the last four decades,are briefly reviewed. The technique of the in-situ pour concrete incorporating ailica fume with higher early strength under low temperature curing conditions is described. The temperature field in shah freezing and its finite difference solution are given in this paper. A recently developed method combining freeze wall model test with back analysis technique based on numerical simulation is also described.

  19. Using of explosive technologies for development of a compact current-limiting device for operation on 110 kV class systems

    Science.gov (United States)

    Shurupov, A. V.; Shurupov, M. A.; Kozlov, A. A.; Kotov, A. V.

    2016-11-01

    This paper considers the possibility of creating on new physical principles a highspeed current-limiting device (CLD) for the networks with voltage of 110 kV, namely, on the basis of the explosive switching elements. The device is designed to limit the steady short-circuit current to acceptable values for the time does not exceed 3 ms at electric power facilities. The paper presents an analysis of the electrical circuit of CLD. The main features of the scheme are: a new high-speed switching element with high regenerating voltage; fusible switching element that enables to limit the overvoltage after sudden breakage of network of the explosive switch; non-inductive resistor with a high heat capacity and a special reactor with operating time less than 1 s. We analyzed the work of the CLD with help of special software PSPICE, which is based on the equivalent circuit of single-phase short circuit to ground in 110 kV network. Analysis of the equivalent circuit operation CLD shows its efficiency and determines the CLD as a perspective direction of the current-limiting devices of new generation.

  20. Development of Radiochemical Separation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eil Hee; Kim, K. W.; Yang, H. B. (and others)

    2007-06-15

    This project of the second phase was aimed at the development of basic unit technologies for advanced partitioning, and the application tests of pre-developed partitioning technologies for separation of actinides by using a simulated multi-component radioactive waste containing Am, Np, Tc, U and so on. The goals for recovery yield of TRU, and for purity of Tc are high than 99% and about 99%, respectively. The work scopes and contents were as follows. 1). For the development of basic unit technologies for advanced partitioning. 1. Development of technologies for co-removal of TRU and for mutual separation of U and TRU with a reduction-complexation reaction. 2. Development of extraction system for high-acidity co-separation of An(+3) and Ln(+3) and its radiolytic evaluation. 3. Synthesis of extractants for the selective separation of An(+3) and its relevant extraction system development. 4. Development of a hybrid system for the recovery of noble metals and its continuous separation tests. 5. Development of electrolytic system for the decompositions of N-NO3 and N-NH3 compounds to nitrogen gas. 2). For the application test of pre-developed partitioning technologies for the separation of actinide elements in a simulated multi-component solution equivalent to HLW level. 1. Co-separation of Tc, Np and U by a (TBP-TOA)/NDD system. 2. Mutual-separation of Am, Cm and RE elements by a (Zr-DEHPA)/NDD system. All results will be used as the fundamental data for the development of advanced partitioning process in the future.

  1. Survey of biomass gasification. Volume III. Current technology and research

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-04-01

    This survey of biomass gasification was written to aid the Department of Energy and the Solar Energy Research Institute Biological and Chemical Conversion Branch in determining the areas of gasification that are ready for commercialization now and those areas in which further research and development will be most productive. Chapter 8 is a survey of gasifier types. Chapter 9 consists of a directory of current manufacturers of gasifiers and gasifier development programs. Chapter 10 is a sampling of current gasification R and D programs and their unique features. Chapter 11 compares air gasification for the conversion of existing gas/oil boiler systems to biomass feedstocks with the price of installing new biomass combustion equipment. Chapter 12 treats gas conditioning as a necessary adjunct to all but close-coupled gasifiers, in which the product is promptly burned. Chapter 13 evaluates, technically and economically, synthesis-gas processes for conversion to methanol, ammonia, gasoline, or methane. Chapter 14 compiles a number of comments that have been assembled from various members of the gasifier community as to possible roles of the government in accelerating the development of gasifier technology and commercialization. Chapter 15 includes recommendations for future gasification research and development.

  2. Integrating Product and Technology Development

    DEFF Research Database (Denmark)

    Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2016-01-01

    Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e.......g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

  3. Development of laser technology in Poland: 2016

    Science.gov (United States)

    Jankiewicz, Zdzisław; Jabczyński, Jan K.; Romaniuk, Ryszard S.

    2016-12-01

    The paper is an introduction to the volume of proceedings and a concise digest of works presented during the XIth National Symposium on Laser Technology (SLT2016) [1]. The Symposium is organized since 1984 every three years [2-8]. SLT2016 was organized by the Institute of Optoelectronics, Military University of Technology (IO, WAT) [9], Warsaw, with cooperation of Warsaw University of Technology (WUT) [10], in Jastarnia on 27-30 September 2016. Symposium Proceedings are traditionally published by SPIE [11-19]. The meeting has gathered around 150 participants who presented around 120 research and technical papers. The Symposium, organized every 3 years is a good portrait of laser technology and laser applications development in Poland at university laboratories, governmental institutes, company R&D laboratories, etc. The SLT also presents the current technical projects under realization by the national research, development and industrial teams. Topical tracks of the Symposium, traditionally divided to two large areas - sources and applications, were: laser sources in near and medium infrared, picosecond and femtosecond lasers, optical fiber lasers and amplifiers, semiconductor lasers, high power and high energy lasers and their applications, new materials and components for laser technology, applications of laser technology in measurements, metrology and science, military applications of laser technology, laser applications in environment protection and remote detection of trace substances, laser applications in medicine and biomedical engineering, laser applications in industry, technologies and material engineering.

  4. Current Technology Trends for School Library Media Specialists

    OpenAIRE

    Leticia Ekhaml; Joan Hubbard

    2003-01-01

    An overview of some of the current technology trends used in classroom instruction and school library media centers in provided in this article such as the use of handheld electronic organizers, CD recorders, digital video cameras, and interactive whiteboards. The article offers some suggestions or ideas on how to acquire new technologies to school library media centers that are low in budgetary funds.

  5. Advanced Mirror & Modelling Technology Development

    Science.gov (United States)

    Effinger, Michael; Stahl, H. Philip; Abplanalp, Laura; Maffett, Steven; Egerman, Robert; Eng, Ron; Arnold, William; Mosier, Gary; Blaurock, Carl

    2014-01-01

    The 2020 Decadal technology survey is starting in 2018. Technology on the shelf at that time will help guide selection to future low risk and low cost missions. The Advanced Mirror Technology Development (AMTD) team has identified development priorities based on science goals and engineering requirements for Ultraviolet Optical near-Infrared (UVOIR) missions in order to contribute to the selection process. One key development identified was lightweight mirror fabrication and testing. A monolithic, stacked, deep core mirror was fused and replicated twice to achieve the desired radius of curvature. It was subsequently successfully polished and tested. A recently awarded second phase to the AMTD project will develop larger mirrors to demonstrate the lateral scaling of the deep core mirror technology. Another key development was rapid modeling for the mirror. One model focused on generating optical and structural model results in minutes instead of months. Many variables could be accounted for regarding the core, face plate and back structure details. A portion of a spacecraft model was also developed. The spacecraft model incorporated direct integration to transform optical path difference to Point Spread Function (PSF) and between PSF to modulation transfer function. The second phase to the project will take the results of the rapid mirror modeler and integrate them into the rapid spacecraft modeler.

  6. Lost circulation technology development status

    Energy Technology Data Exchange (ETDEWEB)

    Glowka, D.A.; Schafer, D.M.; Loeppke, G.E.; Scott, D.D.; Wernig, M.D.; Wright, E.K.

    1992-07-01

    Lost circulation is the loss of drilling fluid from the wellbore to fractures or pores in the rock formation. In geothermal drilling, lost circulation is often a serious problem that contributes greatly to the cost of the average geothermal well. The Lost Circulation Technology Development Program is sponsored at Sandia National Laboratories by the US Department of Energy. The goal of the program is to reduce lost circulation costs by 30--50% through the development of mitigation and characterization technology. This paper describes the technical progress made in this program during the period April 1991--March 1992. 8 refs.

  7. Current status and potential perspectives in classical radiotherapy technology

    Directory of Open Access Journals (Sweden)

    Dabić-Stanković Kata M.

    2004-01-01

    Full Text Available Introduction and potentials of classical radiotherapy After purchase of radiotherapy equipment in 2003, classic radiation therapy in Serbia will reach the highest world level. In order to define the highest standards in radiation technology, we analyzed the current status and potential perspectives of radiation therapy. Technological levels of radiotherapy in developed countries An analysis of present situation in the USA, assumed as the most developed in the world, was done. Available data, collected in the last 3 years (equipment assortment, therapy modalities, workload and manpower for 284 radiotherapy centers, out of potential 2050, were analyzed. Results were presented as crude percentage and mached to point current status. Results of analysis and discussion The analysis showed that CLINAC accelerators are the most popular (82.7%, as well as, ADAC (43.7% and Focus (CMS (27.4% systems for therapy planning. Movement towards virtual simulation is evident (59.3%, although classic ”simulation” is not fully eliminated from the radiotherapy chain. The most popular brachytherapy afterloader is Microselectron HDR (71%. About 64.4% centers use IMPAC communication/verification/record system that seems more open than Varis. All centers practice modern radiotherapy modalities and techniques (CFRT, IMRT, SRS/SRT, TBI, IORT, IVBHRT, HDR BHRT, etc.. CT and MRI availability is out of question, but PET is available in 3% of centers, however this percentage is rapidly growing. Up to 350 new patients per year are treated by one accelerator (about 35 pts. a day. Centers are relatively small and utilize 2-3 accelerators on average. Average FTE staffing norm is 4 radiation oncologists, 2-3 medical radiotherapy physicists, about 3 certified medical dosimetrists and about 6 radiotherapy technologists. Technological aspects and conclusion In the past 5 years relative stagnation in classic radiotherapy has been observed. In spite of substantial investments in

  8. SMD Technology Development Story for NASA Annual Technology report

    Science.gov (United States)

    Seablom, Michael S.

    2017-01-01

    The role of the Science Mission Directorate (SMD) is to enable NASA to achieve its science goals in the context of the Nation's science agenda. SMD's strategic decisions regarding future missions and scientific pursuits are guided by Agency goals, input from the science community-including the recommendations set forth in the National Research Council (NRC) decadal surveys-and a commitment to preserve a balanced program across the major science disciplines. Toward this end, each of the four SMD science divisions-Heliophysics, Earth Science, Planetary Science, and Astrophysics-develops fundamental science questions upon which to base future research and mission programs. Often the breakthrough science required to answer these questions requires significant technological innovation-e.g., instruments or platforms with capabilities beyond the current state of the art. SMD's targeted technology investments fill technology gaps, enabling NASA to build the challenging and complex missions that accomplish groundbreaking science.

  9. Wind turbines: current status, obstacles, trends and technologies

    Science.gov (United States)

    Konstantinidis, E. I.; Botsaris, P. N.

    2016-11-01

    The last decade the installation of wind farms around the world is spreading rapidly and wind energy has become a significant factor for promoting sustainable development. The scope of the present study is to indicate the present status of global wind power expansion as well as the current state of the art in the field of wind turbine technology. The RAM (reliability/availability/maintenance) section is also examined and the Levelized Cost of Energy for onshore/ offshore electricity production is presented. Negative consequences that go with the rapid expansion of wind power like accidents, environmental effects, etc. are highlighted. Especially visual impact to the landscape and noise pollution are some factors that provoke social reactions. Moreover, the complicated and long permitted process of a wind power plant, the high capital cost of the investment and the grid instability due to the intermittent nature of wind, are also significant obstacles in the development of the wind energy production. The current trends in the field of research and development of onshore and offshore wind power production are analyzed. Finally the present study is trying to achieve an estimation of where the wind industry targets for the years to come.

  10. Digital library research : current developments and trends

    OpenAIRE

    Shiri, Ali

    2003-01-01

    This column gives an overview of current trends in digital library research under the following headings: digital library architecture, systems, tools and technologies; digital content and collections; metadata; interoperability; standards; knowledge organisation systems; users and usability; legal, organisational, economic, and social issues in digital libraries.

  11. Extravehicular Activity Technology Development Status and Forecast

    Science.gov (United States)

    Chullen, Cinda; Westheimer, David T.

    2011-01-01

    The goal of NASA s current EVA technology effort is to further develop technologies that will be used to demonstrate a robust EVA system that has application for a variety of future missions including microgravity and surface EVA. Overall the objectives will be to reduce system mass, reduce consumables and maintenance, increase EVA hardware robustness and life, increase crew member efficiency and autonomy, and enable rapid vehicle egress and ingress. Over the past several years, NASA realized a tremendous increase in EVA system development as part of the Exploration Technology Development Program and the Constellation Program. The evident demand for efficient and reliable EVA technologies, particularly regenerable technologies was apparent under these former programs and will continue to be needed as future mission opportunities arise. The technological need for EVA in space has been realized over the last several decades by the Gemini, Apollo, Skylab, Space Shuttle, and the International Space Station (ISS) programs. EVAs were critical to the success of these programs. Now with the ISS extension to 2028 in conjunction with a current forecasted need of at least eight EVAs per year, the EVA hardware life and limited availability of the Extravehicular Mobility Units (EMUs) will eventually become a critical issue. The current EMU has successfully served EVA demands by performing critical operations to assemble the ISS and provide repairs of satellites such as the Hubble Space Telescope. However, as the life of ISS and the vision for future mission opportunities are realized, a new EVA systems capability will be needed and the current architectures and technologies under development offer significant improvements over the current flight systems. In addition to ISS, potential mission applications include EVAs for missions to Near Earth Objects (NEO), Phobos, or future surface missions. Surface missions could include either exploration of the Moon or Mars. Providing an

  12. Current Advanced Power Generation Technologies and Options for China (1)

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ In China,electricity consumption keeps growing at a high speed and installed capacity will be doubled in the next fifteen years.As the world second CO2 producer and also a member of Kyoto Protocol,how to balance energy needs and environmental protection responsibility in the future is a serious problem for China.As such,there are a number of technology choices for today's electric power generation.After discussing the current advanced power generation technologies based on Chinese energy structure and current conditions of power industry,this paper gives a reference to the technology options for China in the future.

  13. University of Washington/ Northwest National Marine Renewable Energy Center Tidal Current Technology Test Protocol, Instrumentation, Design Code, and Oceanographic Modeling Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-11-452

    Energy Technology Data Exchange (ETDEWEB)

    Driscoll, Frederick R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-11-01

    The University of Washington (UW) - Northwest National Marine Renewable Energy Center (UW-NNMREC) and the National Renewable Energy Laboratory (NREL) will collaborate to advance research and development (R&D) of Marine Hydrokinetic (MHK) renewable energy technology, specifically renewable energy captured from ocean tidal currents. UW-NNMREC is endeavoring to establish infrastructure, capabilities and tools to support in-water testing of marine energy technology. NREL is leveraging its experience and capabilities in field testing of wind systems to develop protocols and instrumentation to advance field testing of MHK systems. Under this work, UW-NNMREC and NREL will work together to develop a common instrumentation system and testing methodologies, standards and protocols. UW-NNMREC is also establishing simulation capabilities for MHK turbine and turbine arrays. NREL has extensive experience in wind turbine array modeling and is developing several computer based numerical simulation capabilities for MHK systems. Under this CRADA, UW-NNMREC and NREL will work together to augment single device and array modeling codes. As part of this effort UW NNMREC will also work with NREL to run simulations on NREL's high performance computer system.

  14. Additive Technology: Update on Current Materials and Applications in Dentistry.

    Science.gov (United States)

    Barazanchi, Abdullah; Li, Kai Chun; Al-Amleh, Basil; Lyons, Karl; Waddell, J Neil

    2017-02-01

    Additive manufacturing or 3D printing is becoming an alternative to subtractive manufacturing or milling in the area of computer-aided manufacturing. Research on material for use in additive manufacturing is ongoing, and a wide variety of materials are being used or developed for use in dentistry. Some materials, however, such as cobalt chromium, still lack sufficient research to allow definite conclusions about the suitability of their use in clinical dental practice. Despite this, due to the wide variety of machines that use additive manufacturing, there is much more flexibility in the build material and geometry when building structures compared with subtractive manufacturing. Overall additive manufacturing produces little material waste and is energy efficient when compared to subtractive manufacturing, due to passivity and the additive layering nature of the build process. Such features make the technique suitable to be used with fabricating structures out of hard to handle materials such as cobalt chromium. The main limitations of this technology include the appearance of steps due to layering of material and difficulty in fabricating certain material generally used in dentistry for use in 3D printing such as ceramics. The current pace of technological development, however, promises exciting possibilities. © 2016 by the American College of Prosthodontists.

  15. Development of radioisotope tracer technology

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Joon Ha; Lee, Myun Joo; Jung, Sung Hee; Park, Soon Chul; Lim, Dong Soon; Kim, Jae Ho; Lee, Jae Choon; Lee, Doo Sung; Cho, Yong Suk; Shin, Sung Kuan

    2000-04-01

    The purpose of this study is to develop the radioisotope tracer technology, which can be used in solving industrial and environmental problems and to build a strong tracer group to support the local industries. In relation to the tracer technology in 1999, experiments to estimate the efficiencies of a sludge digester of a waste water treatment plant and a submerged biological reactor of a dye industry were conducted. As a result, the tracer technology for optimization of facilities related to wastewater treatment has been developed and is believed to contribute to improve their operation efficiency. The quantification of the experimental result was attempted to improve the confidence of tracer technology by ECRIN program which basically uses the MCNP simulation principle. Using thin layer activation technique, wear of tappet shim was estimated. Thin layer surface of a tappet shim was irradiated by proton beam and the correlation between the measured activity loss and the amount of wear was established. The equipment was developed to adjust the energy of proton which collides with the surface of tappet. The tracer project team has participated into the tracer test for estimating the efficiency of RFCC system in SK cooperation. From the experiment the tracer team has obtained the primary elements to be considered for judging the efficiency of RFCC unit. By developing the tracer techniques to test huge industrial units like RFCC, the tracer team will be able to support the local industries that require technical services to solve any urgent trouble. (author)

  16. Technology and Motor Ability Development

    Science.gov (United States)

    Wang, Lin; Lang, Yong; Luo, Zhongmin

    2014-01-01

    As a new member joining the technology family, active video games have been developed to promote physical exercise. This working-in-progress paper shares an ongoing project on examining the basic motor abilities that are enhanced through participating in commercially available active video games. [For the full proceedings see ED557181.

  17. Technological Development and Fisheries Management

    NARCIS (Netherlands)

    Eigaard, O.R.; Marchal, P.; Gislason, H.; Rijnsdorp, A.D.

    2014-01-01

    Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism

  18. An International Development Technology Center

    Science.gov (United States)

    Morgan, Robert P.

    1969-01-01

    Main focus of the Center is "the application of science and technology to the solution of problems faced by people in less-developed areas of the world. Adapted from paper presented at ASEE Annual Meeting, The Pennsylvania State University, June, 1969. (Author/WM)

  19. Technological Development and Fisheries Management

    NARCIS (Netherlands)

    Eigaard, O.R.; Marchal, P.; Gislason, H.; Rijnsdorp, A.D.

    2014-01-01

    Many marine fish stocks are overexploited and considerable overcapacity exists in fishing fleets worldwide. One of the reasons for the imbalance between resource availability and fishing capacity is technological development, which continuously increases the efficiency of the vessels—a mechanism ref

  20. Indian fast reactor technology: Current status and future programme

    Indian Academy of Sciences (India)

    S C Chetal; P Chellapandi

    2013-10-01

    The paper brings out the advantages of fast breeder reactor and importance of developing closed nuclear fuel cycle for the large scale energy production, which is followed by its salient safety features. Further, the current status and future strategy of the fast reactor programme since the inception through 40 MWt/13 MWe Fast Breeder Test Reactor (FBTR), is highlighted. The challenges and achievements in science and technology of FBRs focusing on safety are described with the particular reference to 500 MWe capacity Prototype Fast Breeder Reactor (PFBR), being commissioned at Kalpakkam. Roadmap with comprehensive R&D for the large scale deployment of Sodium Cooled Fast Reactor (SFRs) and timely introduction of metallic fuel reactors with emphasis on breeding gain and enhanced safety are being brought out in this paper.

  1. Technology developments applied to healthcare/nursing.

    Science.gov (United States)

    Øyri, Karl; Newbold, Susan; Park, Hyeoun-Ae; Honey, Michelle; Coenen, Amy; Ensio, Anneli; Jesus, Elvio

    2007-01-01

    Future technology developments as applied to healthcare and particularly nursing were discussed. Emerging technologies such as genetics, small unobtrusive monitoring devices, use of information and communication technologies are as tools to not only facilitate but also promote communication among all parties of the healthcare process. These emerging technologies can be used for ubiquitous healthcare (u-health). The role of nursing in the u-health is fundamental and required for success and growth. Nursing's role will evolve as nurses become 'information-mediators' in a broader-sense than current role. All technologies will ultimately focus on the consumer through 'behind-the-scenes' data collection, which in turn will also allow nurses to analyze these data to improve care. We need to acknowledge an increased presence and or pervasiveness of information technologies as key components of quality healthcare. This sort of acknowledgment will help propel nursing, and healthcare, to increase use of these tools. To develop nurses with these types of skills the nursing education process will require a fundamental change to integrate these technology-sorts of tools as necessary elements for success.

  2. The Current Situation and Development Trend of Clean Coal Gasification Technology in China (Ⅰ)%我国洁净煤气化技术现状与存在的问题及发展趋势(上)

    Institute of Scientific and Technical Information of China (English)

    梁永煌; 游伟; 章卫星

    2013-01-01

    The paper first introduces application of a large variety of advanced clean coal gasification technology and related projects under construction which are imported or independently developed and its current development in China .Besides , the paper details production capacity and projects under construction concerning traditional chemical industry such as production of methanol , synthetic ammonia , urea and modern coal chemical industry such as coal-based olefin , ethylene glycol and coal-based chemical industry such as substitute natural gas , oil and coal polygeneration .By analyzing major issues in the development process of clean coal gasification technology , the writing focuses on development trend of clean coal gasification technology in China .%介绍了我国现有(含在建)引进和自主开发的各种先进洁净煤气化技术的应用及发展情况,详细列举煤制甲醇、合成氨、尿素等传统煤化工领域和煤制烯烃、乙二醇等现代煤化工领域以及在煤制天然气、油和煤气化多联产等煤气化相关产业中的产能及在建情况。分析了当前我国洁净煤气化技术发展过程中存在的主要问题,并展望了我国洁净煤气化技术的主要发展趋势。

  3. 虚拟人智能手语合成软件发展现状%The Current Status of the Development of Intelligent Sign Language Synthesis Software Based on Virtual Human Technologies

    Institute of Scientific and Technical Information of China (English)

    王兴辉; 孔雪龙; 蒋红星

    2015-01-01

    手语合成软件的开发与应用对于广大听力语言残疾人的学习、交流及更好地融入现代信息社会具有积极作用。本文对国外虚拟人智能手语合成技术的现状、发展动态及技术实现手段进行了概括和总结,对我国手语合成技术的发展概况、实现方法和存在的问题进行了分析。介绍了基于VRML的H-Anim(humanoid animation)和MPEG-4两个虚拟模型构建标准,对3DSMAX、MAYA、POSER三种建模工具,以及VRML、OpenGL、Direct3D和LabVIEW运动控制工具进行了对比分析。%The development and application of sign language synthesis software will facilitate the learning and communication of people with hearing and speech disabilities in the modern informative society. This article summarizes the current status, development trends and technical measures of intelligent sign language synthesis based on virtual human technologies in the world. It also analyzes the development, implementation and problems of sign language synthesis technologies in China. On the basis of aforementioned analysis and summarization, the two virtual modeling standards (H-Anim and MPEG-4) are introduced and three modeling tools(3DSMAX,MAYA,POSER) and operational control tools(VRML,OpenGL,Direct3D and LabVIEW)are compared and development tools of intelligent sign language synthesis software are compared based on virtual human technologies.

  4. WOVOdat: Data Population and Current Development

    Science.gov (United States)

    Ratdomopurbo, A.; Widiwijayanti, C.; Baguet, A.; Lyou, C.; Newhall, C. G.

    2010-12-01

    WOVOdat is the World Organization of Volcano Observatories’ (WOVO) Database of Volcanic Unrest. A large and valuable body of data on volcanic seismicity, ground deformation, gas emission, and other precursory parameters is now being assembled into a single database which later will be open to all and accessible through the WOVOdat website. The project is now hosted at Earth Observatory of Singapore (Nanyang Technological University). Historical data of volcanic unrest, whether that unrest leads to an eruption or not, can be a reference in forecasting of future activity. Forecasts are based mainly on interpretation of present unrest, but comparisons to past unrest and outcomes give a useful context for the first. WOVOdat will help researchers and those responding to volcanic crisis to search for all close matches to some features of unrest in question, and to use modern techniques to find patterns. For eruption data, WOVOdat uses the Smithsonian Institution’s database of historical eruptions. In the current stage of WOVOdat (data population), our website is supports interaction between WOVOdat developers, observatories, and other partners in building the database, e.g. accessing design information and documentation, and also data uploading. When the database is sufficiently complete, this website will provide tools for users to access and query data, and visualize it in time-series and spatial distributions and other ways.

  5. Technology development life cycle processes.

    Energy Technology Data Exchange (ETDEWEB)

    Beck, David Franklin

    2013-05-01

    This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

  6. 航空油量测量技术研究及其发展现状%Research on the Measurement Technology for Aviation Fuel Volume and Its Current Developing Status

    Institute of Scientific and Technical Information of China (English)

    单宝峰; 张广涛; 李景春; 王斌

    2013-01-01

    介绍了航空油量测量技术在飞机航行过程中的重要作用、发展现状和航空油量测量系统的基本工作原理,描述了液位测量传感器的工作原理及其发展过程,总结了国内外油量测量的计算方法,并罗列了对测量结果造成影响的一些因素.经分析指出数字化、综合化是航空油量测量系统的必然发展趋势.%The important role of the measurement technology for aviation fuel volume in aircraft navigation process, the current developing status of this technology, and the fundamental operational principle of the aviation fuel volume measuring system are introduced. The working principle and developing process of the level sensors are described. The computation methods for fuel volume measurement at home and abroad are summarized, and some factors that influence the measurement results are listed. After analysis, it is proposed that digitization and integration are the inevitable development trend of the aviation fuel volume measuring systems.

  7. Latest development of display technologies

    Science.gov (United States)

    Gao, Hong-Yue; Yao, Qiu-Xiang; Liu, Pan; Zheng, Zhi-Qiang; Liu, Ji-Cheng; Zheng, Hua-Dong; Zeng, Chao; Yu, Ying-Jie; Sun, Tao; Zeng, Zhen-Xiang

    2016-09-01

    In this review we will focus on recent progress in the field of two-dimensional (2D) and three-dimensional (3D) display technologies. We present the current display materials and their applications, including organic light-emitting diodes (OLEDs), flexible OLEDs quantum dot light emitting diodes (QLEDs), active-matrix organic light emitting diodes (AMOLEDs), electronic paper (E-paper), curved displays, stereoscopic 3D displays, volumetric 3D displays, light field 3D displays, and holographic 3D displays. Conventional 2D display devices, such as liquid crystal devices (LCDs) often result in ambiguity in high-dimensional data images because of lacking true depth information. This review thus provides a detailed description of 3D display technologies.

  8. Current European developments in solar paddle drives

    Science.gov (United States)

    Bentall, R. H.

    1973-01-01

    The European Space Research and Technology Centre (ESTEC) is sponsoring the development of a number of critical spacecraft hardware items. The hardware under development includes two competing solar paddle drives which are being produced to similar specifications. Three mechanisms of each type are being produced and will undergo thermal vacuum testing. All mechanisms have lead lubricated bearings.

  9. THE DEVELOPMENT OF FCC STRIPPING TECHNOLOGY

    Institute of Scientific and Technical Information of China (English)

    ZHANGZhen-qian

    2003-01-01

    This article briefly describes the major patents domestic and the abroad,and the current situation and achievements of FCC stripping technology in China.The develping trend of FCC stripping technology is presented,including further developments of FCC stripper to improve unit performance,combination of the stripper and pre-stripper within disengager to from a complete high-efficiency FCC stripping system.In addition to high efficiency,simple structure and easiness of installation and maintenance for a new FCC stripper are all of consideration.

  10. Development of Remote Operations Technology

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Ji Sub; Kwon, Sung Gyu; Kim, Ki Ho; Park, Byung Suk; Park Young Soo; Lee, Won Sang [Korea Atomic Energry Research Institute, Taejon (Korea, Republic of)

    1994-12-01

    To control the swing of the load suspended to overhead crane, various devices, anti-swing control algorithms, and experimental and pilot-scaled cranes have been developed since 1989. In this year, the problems of control algorithm are identified and new algorithms which adopt an acceleration profile planning, a velocity feedback control, a fuzzy control, and an anti-swing/position control methods are developed. Also, the report includes the program of transferring the anti-swing overhead crane technology to industry. And, to improve the cask handling safety and to increase the cask handling capacity of a facility, a Remote Cask Grappling and Lid Unbolting Device (RCG=LUD) which is suspended to an anti-swing crane and remotely controlled to hold the cask and unbolt the cask lid is developed. the controller using PMAC is tested for successful remote operations. Technology for this device has the potential for developing other technologies, such as nuclear reactor maintenance and repair. 62 refs., 73 figs., 27 tabs.

  11. Current and long-term technologies of laser therapy

    Science.gov (United States)

    Ulashcyk, Vladimir S.; Volotovskaya, Anna V.

    2007-06-01

    Laser therapy, using low-energy laser radiation, is being more and more applied. The most applied technology is transcutaneous radiation of tissues by laser radiation. Originally, a direct action on a pathological site was mostly used, but recently more attention is given to reflexogenic areas, acupuncture points, and endocrine organ projection sites. The development of light-conductive engineering made it possible to practically apply intraorgan laser therapy. This technology is widely spread in gynecology, otorhinolaryngology, urology, gastroenterology, etc. Close to it are different versions of intratissue laser therapy (intraosteal, periosteal, myofascial). A special kind of laser therapy is laser hemotherapy. Depending on the techniques and protocol of its application, there are extracorporeal, intravascular, and supravenous ways of action. According to our comparative investigations, supravenous hemotherapy by its therapeutic efficacy and major medicinal effects can be well compared with intravascular laser hemotherapy. With good prospects and efficiency is laser therapy as a combination of laser and other physical factors. Magnetolaser therapy has been scientifically substantiated and practically applied so far. Theoretically and experimentally substantiated is a combined application of laser radiation and physical factors such as ultrasound, direct current field, vacuum, cryotherapy, etc. Experimental research and few so far clinical observations are indicative of prospects of a complex application of laser radiation and drugs. To improve light absorption, laser radiation is combined with different dyes. Photodynamic therapy, originally used in oncology, is applied today in treating different diseases. We showed a possibility of using a number of drugs possessing simultaneously photosensitizing properties to this end. Laser radiation significantly influences pharmacokinetics and pharmacodynamics of drugs, which gives reason to practically implement laser

  12. Technology and knowledge transfer for development

    CSIR Research Space (South Africa)

    Chakwizira, J

    2008-01-01

    Full Text Available . An indicative list of recommendations to turnaround the knowledge and technology transfer condition of Africa into a more resounding success than currently existing is indicated. A brief conclusion that includes critical percepts and thoughts on the future... growth and development. "Knowledge Management caters to the critical issues of organizational adaption, survival and competence in face of increasingly discontinuous environmental change. Essentially, it embodies organizational processes that seek...

  13. Technology development and technology gap among Latin American countries

    OpenAIRE

    Serrano Moya, Edgar David

    2014-01-01

    Objective: to study the source of the technology gaps amongst some Latin American countries and to identify whether a regional system of technological progress may be strengthened. ethodology: technology development within some Latin America countries was researched based on the technology frontier concept. In order to do that, the technological advancement of such countries was compared using standard variables and institutional systems. The concept and scope of the technology frontier, whic...

  14. 四氯化碳过程助剂及其替代技术的应用与发展现状%Carbon tetrachloride as a process agent,and application and current development situation of its substitute technology

    Institute of Scientific and Technical Information of China (English)

    李春喜; 汪文川; 杨礼荣; 刘援; 王淑燕

    2000-01-01

    简要介绍了破坏臭物质的主要品种、用途和国家淘汰计划,着重介绍了四氯化碳在过程助剂领域中的主要用途、用量以及替代技术的开发现状和趋势,指出了研究四氯化碳转化技术的紧迫性、重要性和选择转化反应需要考虑的因素。%The main species,uses and phaseout programof ozone depleting substances are described briefly.The main uses and consumption of carbon tetrachloride are introduced emphatically as well as the current development situation and trend of its substitute technology.The urgency,importance and factors needing to be considered in the development of carbon tetrachloride substitute technology are pointed out.

  15. Current Technology Trends for School Library Media Specialists

    Directory of Open Access Journals (Sweden)

    Leticia Ekhaml

    2003-03-01

    Full Text Available An overview of some of the current technology trends used in classroom instruction and school library media centers in provided in this article such as the use of handheld electronic organizers, CD recorders, digital video cameras, and interactive whiteboards. The article offers some suggestions or ideas on how to acquire new technologies to school library media centers that are low in budgetary funds.

  16. Making technological innovation work for sustainable development.

    Science.gov (United States)

    Anadon, Laura Diaz; Chan, Gabriel; Harley, Alicia G; Matus, Kira; Moon, Suerie; Murthy, Sharmila L; Clark, William C

    2016-08-30

    This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset.

  17. Current Developments in DETER Cybersecurity Testbed Technology

    Science.gov (United States)

    2015-12-08

    21, 5 (Nov. 1987), 123-138. [44] J. Stewart, Storm Worm DDoS Attack, SecureWorks Research, available at http://www.secureworks.com/research...threats/storm-worm [45] J. Mirkovic, M. Robinson, P. Reiher, and G. Kuenning, Alliance Formation for DDoS Defense, Proceedings of the New Security...Paradigms Workshop, ACM SIGSAC, August 2003. [46] G. Oikonomou, J. Mirkovic, P. Reiher and M. Robinson, A Framework for Collaborative DDoS Defense

  18. Current and future assisted reproductive technologies for mammalian farm animals.

    Science.gov (United States)

    Hansen, Peter J

    2014-01-01

    Reproduction in domestic animals is under control by man and the technologies developed to facilitate that control have a major impact on the efficiency of food production. Reproduction is an energy-intensive process. In beef cattle, for example, over 50 % of the total feed consumption required to produce a unit of meat protein is consumed by the dam of the meat animal (Anim Prod 27:367-379, 1978). Sows are responsible for about 20 % of the total feed needed to produce animals for slaughter (Adv Pork Prod 19:223-237, 2008). Accordingly, energy input to produce food from animal sources is reduced by increasing number of offspring per unit time a breeding female is in the herd. Using beef cattle as an example again, life-cycle efficiency for production of weaned calves is positively related to early age at puberty and short calving intervals (J Anim Sci 57:852-866, 1983). Reproductive technologies also dictate the strategies that can be used to select animals genetically for traits that improve production. Of critical importance has been artificial insemination (AI) (Anim Reprod Sci 62:143-172, 2000; Stud Hist Philos Biol Biomed Sci 38:411-441, 2007; Reprod Domest Anim 43:379-385, 2008; J Dairy Sci 92:5814-5833, 2009) and, as will be outlined in this chapter, emerging technologies offer additional opportunities for improvements in genetic selection. Given the central role of reproduction as a determinant of production efficiency and in genetic selection, improvements in reproductive technologies will be crucial to meeting the challenges created by the anticipated increases in world population (from seven billion people in 2011 to an anticipated nine billion by 2050; World population prospects: the 2010 revision, highlights and advance tables. Working Paper No. ESA/P/WP.220, New York) and by difficulties in livestock production wrought by climate change (SAT eJournal 4:1-23, 2007).The purpose of this chapter will be to highlight current and emerging reproductive

  19. Current Challenges in Integrating Educational Technology into Elementary and Middle School Mathematics Education

    Science.gov (United States)

    Okita, Sandra Y.; Jamalian, Azadeh

    2011-01-01

    Developing curriculum and instruction for mathematics education and designing technologically enhanced learning environments are often pursued separately, but may need to be addressed together to effectively link the strengths of technology to performance in mathematics and conceptual understanding. This paper addresses current challenges with…

  20. Current and Emerging Cell Culture Manufacturing Technologies for Influenza Vaccines

    Directory of Open Access Journals (Sweden)

    Ernest Milián

    2015-01-01

    Full Text Available Annually, influenza virus infects millions of people worldwide. Vaccination programs against seasonal influenza infections require the production of hundreds of million doses within a very short period of time. The influenza vaccine is currently produced using a technology developed in the 1940s that relies on replicating the virus in embryonated hens’ eggs. The monovalent viral preparation is inactivated and purified before being formulated in trivalent or tetravalent influenza vaccines. The production process has depended on a continuous supply of eggs. In the case of pandemic outbreaks, this mode of production might be problematic because of a possible drastic reduction in the egg supply and the low flexibility of the manufacturing process resulting in a lack of supply of the required vaccine doses in a timely fashion. Novel production systems using mammalian or insect cell cultures have emerged to overcome the limitations of the egg-based production system. These industrially well-established production systems have been primarily selected for a faster and more flexible response to pandemic threats. Here, we review the most important cell culture manufacturing processes that have been developed in recent years for mass production of influenza vaccines.

  1. Review of the current wind energy technologies and global market

    OpenAIRE

    Komarov, Dragan; Stupar, Slobodan; Posteljnik, Zorana

    2011-01-01

    The modern wind energy technologies and recent global wind energy market trends are reviewed in the paper. Basic principles of conversion of wind energy to electricity are described with brief overview of the state-of-the-art technologies for subassemblies such as wind turbine blades and drive trains. Global wind energy market was reviewed in order to attain notion of wind power market developments in the future. The most developed countries in terms of wind energy utilization such as Denmark...

  2. Development of laser technology in Poland

    CERN Document Server

    Gajda, J

    2009-01-01

    The paper presents chosen development threads of laser technology and associated branches of optoelectronics in this country. An occasion to summarize the work and show their current status is the 50 th anniversary of construction of the first laser. The first laser in Poland was launched successfully in 1969, almost simultaneously at WAT and PW. Domestic achievements in this area are summarized every three years by Symposium on Laser Technology held traditionally in Swinoujscie. The work carried on in Poland concerns technology of laser materials, construction of new lasers and associated equipment as well as laser applications. Many technical teams participate in laser oriented European structural and framework projects. Ths is an invited paper to present participation of Polish teams in such European projects as EuCARD - European Coordination of Accelerator Research, FLASH - Free ELctron Laser in DESY Hamburg, E-XFEL - European X-Ray FEL, ELI - Extreme Light Infrastructure, and HIPER.

  3. Current Trend in Furnace Technology in the Melting Industries

    Directory of Open Access Journals (Sweden)

    O.A. Ighodalo

    2011-06-01

    Full Text Available The aim of this study is to presents some of the current trend in Furnace technology as it pertains to the melting industries. Furnaces are applied in various industries for material processing. Large amounts of energy are usually consumed in the melting industries. The current trend in furnace technology is towards energy conservation, enhanced efficiency and productivity. The reduction of pollutant emissions are also taken into consideration due to their environmental impact. The various materials and processes for furnaces are discussed. The various strategies being employed towards furnace energy conservation, efficiency and productivity, and reduction of pollutant emissions are also discussed. Such strategies include the use of better fuel types such as natural gas; improved insulation and refractory materials; advanced burner designs such as high velocity, regenerative and recuperative burners; new combustion technologies such as air and fuel staging, flue gas recirculation technique. Mathematical modeling is also being employed for analysis and design purpose.

  4. Current Advanced Power Generation Technologies and Options for China (2)

    Institute of Scientific and Technical Information of China (English)

    Deng Nubo; Mohsen Assadi; Yang Cheng

    2008-01-01

    @@ In China,electricity consumption keeps growing at a high speed and installed capacity will be doubled in the next fifteen years.As the world second CO2 producer and also a member of Kyoto Protocol,how to balance energy needs arid environmental protection responsibility in the future is a serious problem for China.As such,there are a number of technology choices for today's electric power generation.After discussing the current advanced power generation technologies based on Chinese energy structure and current conditions of power industry,this paper gives a reference to the technology options for China in the future.Here published is the second part of the paper.

  5. Development of DUPIC safeguards technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. D.; Ko, W. I.; Song, D. Y. [and others

    2000-03-01

    During the first phase of R and D program conducted from 1997 to 1999, nuclear material safeguards studies system were performed on the technology development of DUPIC safeguards system such as nuclear material measurement in bulk form and product form, DUPIC fuel reactivity measurement, near-real-time accountancy, and containment and surveillance system for effective and efficient implementation of domestic and international safeguards obligation. For the nuclear material measurement system, the performance test was finished and received IAEA approval, and now is being used in DUPIC Fuel Fabrication Facility(DFDF) for nuclear material accounting and control. Other systems being developed in this study were already installed in DFDF and being under performance test. Those systems developed in this study will make a contribution not only to the effective implementation of DUPIC safeguards, but also to enhance the international confidence build-up in peaceful use of spent fuel material. (author)

  6. EHV systems technology - A look at the principles and current status. [Electric and Hybrid Vehicle

    Science.gov (United States)

    Kurtz, D. W.; Levin, R. R.

    1983-01-01

    An examination of the basic principles and practices of systems engineering is undertaken in the context of their application to the component and subsystem technologies involved in electric and hybrid vehicle (EHV) development. The limitations of purely electric vehicles are contrasted with hybrid, heat engine-incorporating vehicle technology, which is inherently more versatile. A hybrid vehicle concept assessment methodology is presented which employs current technology and yet fully satisfies U.S. Department of Energy petroleum displacement goals.

  7. Current status of assisted reproductive technology in Korea, 2010.

    Science.gov (United States)

    Lee, Gyoung Hoon; Song, Hyun Jin; Lee, Kyu Sup; Choi, Young Min

    2015-03-01

    Great advances have been made in the field of assisted reproductive technology (ART) since the first in vitro fertilization (IVF) baby was born in Korea. This study was designed to report on the current status of ART therapy in South Korea between January 1 and December 31 of 2010. A revised survey, originally developed by the International Committee Monitoring Assisted Reproductive Technologies, was sent to all available ART centers via email in 2013. Fresh embryo transfer (FET) cases were categorized into standard IVF or intracytoplasmic sperm injections. These cases, the thawing embryo transfer (TET) cases, and other related procedures were surveyed. Data from 30,785 ART procedures were provided by 78 clinics. Of the 28,200 cycles in which oocytes were retrieved, 92.2% of these cycles were completely transferred. In addition, 8,075 cycles were confirmed to be clinical pregnancies in the FET cycles, which represent a pregnancy rate of 28.6% per oocyte pick-up and 31.1% per embryo transfer. The most common number of embryos transferred in the FET was three embryos (37.3%) followed by two embryos (36.3%) and one embryo (14.0%). Of the 6,648 TET cycles transferred, 2,356 clinical pregnancies were confirmed by ultrasonography. The most common number of embryos in the TET group was two embryos (43.4%) followed by three embryos (25.4%) and one embryo (18.9%). The clinical pregnancy rate per transfer in the FET cycles was similar in 2009 and 2010. Among the FET cycles where one or two embryos were transferred, the clinical pregnancy rate per transfer slightly increased from 2009 (28.7%) to 2010 (32.9%).

  8. Information Communication Technology Planning in Developing Countries

    Science.gov (United States)

    Malapile, Sandy; Keengwe, Jared

    2014-01-01

    This article explores major issues related to Information Communication Technology (ICT) in education and technology planning. Using the diffusion of innovation theory, the authors examine technology planning opportunities and challenges in Developing countries (DCs), technology planning trends in schools, and existing technology planning models…

  9. Information Communication Technology Planning in Developing Countries

    Science.gov (United States)

    Malapile, Sandy; Keengwe, Jared

    2014-01-01

    This article explores major issues related to Information Communication Technology (ICT) in education and technology planning. Using the diffusion of innovation theory, the authors examine technology planning opportunities and challenges in Developing countries (DCs), technology planning trends in schools, and existing technology planning models…

  10. Decontamination and decommissioning technology tree and the current status of the technologies

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Won, H.J.; Kim, G.N.; Lee, K.W.; Chol, W.K.; Jung, C.H.; Kim, C.J.; Kim, S.H.; Kwon, S.O.; Chung, C.M

    2001-03-01

    A technology tree diagram was developed on the basis of the necessary technologies applicable to the decontamination and decommissioning of nuclear facilities. The technology tree diagram is consist of 6 main areas such as characterization, decontamination, decommissioning and remote technology, radwaste management, site restoration, and decommissioning plan and engineering. Characterization is divided into 4 regions such as sampling and data collection, general characterization, chemical analysis and radiological analysis. Decontamination is also divided into 4 regions such as chemical decontamination, mechanical decontamination, the other decontamination technologies and new decontamination technologies. Decommissioning and remote technology area is divided into 4 regions such as cutting techniques, decommissioning technologies, new developing technologies and remote technologies. Radwaste management area is divided into 5 regions such as solid waste treatment, sludge treatment, liquid waste treatment, gas waste treatment and thermal treatment. Site restoration area is divided into 3 regions such as the evaluation of site contamination, soil decontamination and ground water decontamination. Finally, permission, decommissioning process, cost evaluation, quality assurance and the estimation of radionuclide inventory were mentioned in the decommissioning plan and engineering area. The estimated items for each technology are applicable domestic D and D facilities, D and D problem area and contamination/requirement, classification of D and D technology, similar technology, principle and overview of technology, status, science technology needs, implementation needs, reference and contact point.

  11. Technological Microbiology: Development and Applications

    Science.gov (United States)

    Vitorino, Luciana C.; Bessa, Layara A.

    2017-01-01

    Over thousands of years, modernization could be predicted for the use of microorganisms in the production of foods and beverages. However, the current accelerated pace of new food production is due to the rapid incorporation of biotechnological techniques that allow the rapid identification of new molecules and microorganisms or even the genetic improvement of known species. At no other time in history have microorganisms been so present in areas such as agriculture and medicine, except as recognized villains. Currently, however, beneficial microorganisms such as plant growth promoters and phytopathogen controllers are required by various agricultural crops, and many species are being used as biofactories of important pharmacological molecules. The use of biofactories does not end there: microorganisms have been explored for the synthesis of diverse chemicals, fuel molecules, and industrial polymers, and strains environmentally important due to their biodecomposing or biosorption capacity have gained interest in research laboratories and in industrial activities. We call this new microbiology Technological Microbiology, and we believe that complex techniques, such as heterologous expression and metabolic engineering, can be increasingly incorporated into this applied science, allowing the generation of new and improved products and services. PMID:28539920

  12. Trends in Health Information Technology Safety: From Technology-Induced Errors to Current Approaches for Ensuring Technology Safety

    OpenAIRE

    Borycki,Elizabeth

    2013-01-01

    Objectives Health information technology (HIT) research findings suggested that new healthcare technologies could reduce some types of medical errors while at the same time introducing classes of medical errors (i.e., technology-induced errors). Technology-induced errors have their origins in HIT, and/or HIT contribute to their occurrence. The objective of this paper is to review current trends in the published literature on HIT safety. Methods A review and synthesis of the medical and life s...

  13. Analysis of current state and prospects of steel production development

    Science.gov (United States)

    Protopopov, E. V.; Feyler, S. V.

    2016-09-01

    Data on world production of steel in the XXI century are provided. Analysis of current state and prospects of ferrous metallurgy development in the Russian Federation is carried out. Results of national steel production performance during 10 months of the year 2015 are given for different countries. Analysis of the main directions of metallurgical equipment import substitution aimed at technological independence in the industry is made. Russian ferrous metallurgy development predictions in its’ main directions up to 2030 is provided.

  14. Information technology for sustainable development

    DEFF Research Database (Denmark)

    Holgaard, Jette Egelund; Guerra, Aida; Knoche, Hendrik

    2013-01-01

    from a broader theme to a problem formulation designed to fit the time, discipline and theme of study. In the prospect of Education for Sustainable development (ESD) the students are to move from the conceptually complex field of sustainable development (SD) to a specific formulation of a problem...... that initiate design, implementation and test of ICT for SD. On the empirical level we draw from experiments in autumn 2009 and spring 2013 within the field of Media technology. Observations, text analysis of students’ work as well as reflections from staff has been relied on in order to analyse the practical...... frame, like sustainability, encouraged students to broaden their perspective on stressing economic, environmental as well as social concerns. However, the experiments also showed that interlinking engineering subjects with sustainability is a rather time-consuming task – and some of the students were...

  15. Development of high current electron beam generator

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byeong Cheol; Lee, Jong Min; Kim, Sun Kook [and others

    1997-05-01

    A high-current electron beam generator has been developed. The energy and the average current of the electron beam are 2 MeV and 50 mA, respectively. The electron beam generator is composed of an electron gun, RF acceleration cavities, a 260-kW RF generator, electron beam optics components, and control system, etc. The electron beam generator will be used for the development of a millimeter-wave free-electron laser and a high average power infrared free-electron laser. The machine will also be used as a user facility in nuclear industry, environment industry, semiconductor industry, chemical industry, etc. (author). 15 tabs., 85 figs.

  16. Current development of UAV sense and avoid system

    Science.gov (United States)

    Zhahir, A.; Razali, A.; Mohd Ajir, M. R.

    2016-10-01

    As unmanned aerial vehicles (UAVs) are now gaining high interests from civil and commercialised market, the automatic sense and avoid (SAA) system is currently one of the essential features in research spotlight of UAV. Several sensor types employed in current SAA research and technology of sensor fusion that offers a great opportunity in improving detection and tracking system are presented here. The purpose of this paper is to provide an overview of SAA system development in general, as well as the current challenges facing UAV researchers and designers.

  17. Robotic technology in surgery: current status in 2008.

    Science.gov (United States)

    Murphy, Declan G; Hall, Rohan; Tong, Raymond; Goel, Rajiv; Costello, Anthony J

    2008-12-01

    There is increasing patient and surgeon interest in robotic-assisted surgery, particularly with the proliferation of da Vinci surgical systems (Intuitive Surgical, Sunnyvale, CA, USA) throughout the world. There is much debate over the usefulness and cost-effectiveness of these systems. The currently available robotic surgical technology is described. Published data relating to the da Vinci system are reviewed and the current status of surgical robotics within Australia and New Zealand is assessed. The first da Vinci system in Australia and New Zealand was installed in 2003. Four systems had been installed by 2006 and seven systems are currently in use. Most of these are based in private hospitals. Technical advantages of this system include 3-D vision, enhanced dexterity and improved ergonomics when compared with standard laparoscopic surgery. Most procedures currently carried out are urological, with cardiac, gynaecological and general surgeons also using this system. The number of patients undergoing robotic-assisted surgery in Australia and New Zealand has increased fivefold in the past 4 years. The most common procedure carried out is robotic-assisted laparoscopic radical prostatectomy. Published data suggest that robotic-assisted surgery is feasible and safe although the installation and recurring costs remain high. There is increasing acceptance of robotic-assisted surgery, especially for urological procedures. The da Vinci surgical system is becoming more widely available in Australia and New Zealand. Other surgical specialties will probably use this technology. Significant costs are associated with robotic technology and it is not yet widely available to public patients.

  18. Current trends in endodontic practice: emergency treatments and technological armamentarium.

    Science.gov (United States)

    Lee, Michelle; Winkler, Johnathon; Hartwell, Gary; Stewart, Jeffrey; Caine, Rufus

    2009-01-01

    The current clinical practice of endodontics includes the utilization of a variety of new technological advances and materials. The last comprehensive survey that compared treatment modalities used in endodontic practices was conducted in 1990. The purpose of the current survey was to determine the frequency with which these new endodontic technologies and materials are being used in endodontic practices today. An e-mail questionnaire was sent to the 636 active diplomates of the American Board of Endodontics with current e-mail addresses. Two hundred thirty-two diplomates responded for a response rate of 35%. Calcium hydroxide was found to be the most frequently used intracanal medicament for all cases diagnosed with necrotic pulps. Ibuprofen was the most frequently prescribed medication for pain, and penicillin was the most frequently prescribed antibiotic when an active infection was present. Eighty-two percent of the respondents are still incorporating hand files in some fashion during the cleansing and shaping phase of treatment. Lateral condensation and continuous wave were the most common methods used for obturation. Digital radiography was reported as being used by 72.5% of the respondents, whereas 45.3% reported using the microscope greater than 75% of the patient treatment. Ultrasonics was used by 97.8% of the respondents. It appears from the results that new endodontic technology is currently being used in the endodontic offices of those who responded to the survey.

  19. NASA Astrophysics Funds Strategic Technology Development

    Science.gov (United States)

    Seery, Bernard D.; Ganel, Opher; Pham, Bruce

    2016-01-01

    guiding investment decisions. We also present results of this year's technology gap prioritization and showcase our current portfolio of technology development projects.

  20. Fuel cells: a survey of current developments

    Science.gov (United States)

    Cropper, Mark A. J.; Geiger, Stefan; Jollie, David M.

    Since the first practical uses of fuel cells were developed, it has become clear that they could find use in many products over a wide power range of milliwatts to tens of megawatts. Throughout the 1990s, and later, there has been significant work carried out on adapting the various different fuel cell technologies for use in targetted consumer and industrial applications. This paper discusses these developments and gives details on the specific market segments for providing power to vehicles, portable devices and large- and small-scale stationary power generation.

  1. Development of DUPIC safeguards technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. D.; Kang, H. Y.; Ko, W. I. [and others

    2002-05-01

    DUPIC safeguards R and D in the second phase has focused on the development of nuclear material measurement system and its operation and verification, the development of nuclear material control and accounting system, and the development of remote and unmanned containment/surveillance system. Of them, the nuclear material measurement system was authenticated from IAEA and officially used for IAEA and domestic safeguards activities in DFDF. It was also verified that the system could be used for quality control of DUPIC process. It is recognised that the diagnostic software using neural network and remote and unmanned containment/surveillance system developed here could be key technologies to go into remote and near-real time monitoring system. The result of this project will eventually contribute to similar nuclear fuel cycles like MOX and pyroprocessing facility as well as the effective implementation of DUPIC safeguards. In addition, it will be helpful to enhance international confidence build-up in the peaceful use of spent fuel material.

  2. A comunidade científica, o Estado e as universidades, no atual estágio de desenvolvimento científico tecnológico Scientific community, State and universities in the current stage of scientific technological development

    Directory of Open Access Journals (Sweden)

    Michelangelo Giotto Santoro Trigueiro

    2001-12-01

    Full Text Available O trabalho discute a relação entre a comunidade científica, o Estado e a universidade no contexto atual do desenvolvimento científico-tecnológico. Enfatiza a dimensão política das transformações recentes, sobretudo no tocante aos sistemas decisórios, contrapondo momento mais verticalizado com cenário mais democratizado, e as conseqüências das transformações políticas contemporâneas, na sociedade brasileira. Procura analisar as mútuas correlações entre o Estado, as universidades e as comunidades científicas, a partir do entendimento da especificidade de cada um destes atores na condução do desenvolvimento científico-tecnológico nacional. A esse respeito, é analisado todo um conjunto de ações que se coadunam com o novo modo de produção do conhecimento, buscando destacar a natureza controversa e polêmica da inserção do Estado e o caráter conservador da comunidade científica, bem como a resistência da universidade na proposição de novas linhas de atuação no enfrentamento dos desafios trazidos pela ciência e tecnologias contemporâneas.This article discusses the relationship between scientific community, the State and university in the current circumstances of scientific-technological development. It stresses the political dimension of recent changes, specially regarding decision systems, comparing a more vertical moment and a more democratic scenario and the consequences of contemporary political changes in Brazilian society. It examines mutual relations between the State, universities and the scientific community, based on the understanding of each of those actors' specificities in advancing national scientific-technological development. A whole set of actions is examined in accordance with knowledge's new mode of production in order to highlight the controversial nature of the State and the conservative character of the scientific community as well as the resistance of the university in proposing new lines

  3. Complexity of the Current High and New Technology of Life Science Facing Ethical Dilemma during Its Development%论高新生命科学技术发展的伦理困境复杂性

    Institute of Scientific and Technical Information of China (English)

    郭玉宇

    2015-01-01

    The current high and new technology of life science facing ethical dilemma during its development ,which is beyond general medical ethical issues on its complexity . The ethical complexity derives from three factors : the diversification of bioethical issues initiated by the complexity of the post‐modern moral diversification ;the high and new technology of life science not only intervenes in the body function ,but also causes the other interventions which are beyond physical body ;the complexity of the response of the current Chinese bioethics . This paper considered that bioethics exploration under the Chinese discourse system was a worthy development path .However ,how to integrate the traditional culture ,western incoming culture and the modern Chinese culture to solve the Chinese bioethical problems is a long and difficult way .%当下高新生命科学技术在发展过程中面临着诸多伦理困境,而其复杂性超过了一般性的医学道德问题。高新生命科学技术伦理困境的复杂性源于三个因素:当下后现代道德多元化的复杂性所引发的生命伦理问题多元化;高新生命科学技术不仅干预身体机能,还引发超身体干预;中国当下生命伦理学应对的复杂性。中国话语体系下的生命伦理学探索是值得发展的路径,但如何整合传统文化、西方传入文化和当下中国现代文化,以解决中国本土的生命伦理问题,任重而道远。

  4. The development of bioenergy technology in China

    Energy Technology Data Exchange (ETDEWEB)

    Wu, C.Z.; Yin, X.L.; Yuan, Z.H.; Zhou, Z.Q.; Zhuang, X.S. [The Renewable Energy and Gas Hydrate Key Laboratory of CAS, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, 2 Nengyuan Road, Tianhe District, Guangzhou 510640 (China)

    2010-11-15

    Among renewable energy resources, bioenergy is one of the fastest growth energy alternatives with tremendous potential in China. The thermal, physical, and biological processes of conversion of biomass yield a number of products and can be obtained as gases, liquids, solid fuels, and electricity as well as a variety of chemicals. Various bioenergy technologies that have been developed are at the fundamental research, demonstration, and commercialization stages. This review concentrates on the processes that are attracting the most attention in China. This paper presents the important roles bioenergy plays in China. Firstly, the application status of bioenergy technologies are introduced, including biogas, fuel ethanol, biodiesel, and power generation at the commercialization stage. Then, the current research progresses are analyzed of ethanol derived from lignocellulose, sweet sorghum and cassava, biodiesel from jatropha, biomass briquetting, synthesized fuels and pyrolysis technologies at the fundamental research and demonstration stages. Finally, it is concluded that the key areas for developing bioenergy for the future are the exploitation of new biomass resources and R and D in biofuels from non-food biomass resources, as well as the development of commercialization methods suitable for developing countries. (author)

  5. Geothermal Energy Technology: a current-awareness bulletin

    Energy Technology Data Exchange (ETDEWEB)

    Smith, L.B. (ed.)

    1983-01-15

    This bulletin announces on a semimonthly basis the current worldwide information available on the technology required for economic recovery of geothermal energy and its use either directly or for production of electric power. The subject content encompasses: resource status and assessment, geology and hydrology of geothermal systems, geothermal exploration, legal and institutional aspects, economic and final aspects, environmental aspects and waste disposal, by-products, geothermal power plants, geothermal engineering, direct energy utilization, and geothermal data and theory.

  6. Part 2 -- current program integrating strategies and lubrication technology

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, B.

    1996-12-01

    This paper is the second of two that describe the Predictive Maintenance Program for rotating machinery at the Palo Verde Nuclear Generating Station. The Predictive Maintenance program has been enhanced through organizational changes and improved interdisciplinary usage of technology. This paper will discuss current program strategies that have improved the interaction between the Vibration and Lube Oil programs. The {open_quotes}Lube Oil{close_quotes} view of the combined program along with case studies will then be presented.

  7. CMOS technology and current-feedback op-amps

    DEFF Research Database (Denmark)

    Bruun, Erik

    1993-01-01

    Some of the problems related to the application of CMOS technology to current-feedback operational amplifiers (CFB op-amps) are identified. Problems caused by the low device transconductance and by the absence of matching between p-channel and n-channel transistors are examined, and circuit...... poor performance compared to the bipolar designs, but CMOS has a potential for CFB op-amp design if more ingenious circuit configurations are applied...

  8. The Current Awareness of Radio Frequency Identification Technology

    Science.gov (United States)

    Janák, Erik

    2012-12-01

    The article can be divided into two constituent parts. In the first part is introduced the RFID reference model, which categorizes RFID applications into eight groups. In the second part are thereafter presented the results of the survey of the use of information and communication technologies in Slovak enterprises, which was conducted by the Slovak Statistical Office, as well as the results of own questionnaire survey, which was aimed to determine the level of current awareness of RFID use in Slovakia.

  9. Spray drying technique: II. Current applications in pharmaceutical technology.

    Science.gov (United States)

    Sollohub, Krzysztof; Cal, Krzysztof

    2010-02-01

    This review presents current applications of spray drying in pharmaceutical technology. The topics discussed include the obtention of excipients and cospray dried composites, methods for increasing the aqueous solubility and bioavailability of active substances, and modified release profiles from spray-dried particles. This review also describes the use of the spray drying technique in the context of biological therapies, such as the spray drying of proteins, inhalable powders, and viable organisms, and the modification of the physical properties of dry plant extracts.

  10. SYRUPS: COMPOSITION, TECHNOLOGY, CURRENT STATE OF RESEARCH (REVIEW

    Directory of Open Access Journals (Sweden)

    M. E. Kim

    2014-01-01

    Full Text Available The overview data for the syrups formulation, including syrups for children, with synthetic substances were represented: assortment, composition, technological approach. The advantages and disadvantages of this dosage form were described. Details considered flavoring agents and other auxiliaries (stabilizers, preservatives, thickeners comprising syrups were closely examined. The issues of current research state of syrups for children were described.

  11. Future Regulations – A Catalyst for Technology Development

    Science.gov (United States)

    Summary of current mobile source regulations and EPA mobile source regulatory authority with an emphasis on how EPA regulations are a driver for the development and introduction of automotive technology.

  12. Technological challenges in antibiotic discovery and development: a workshop summary

    National Research Council Canada - National Science Library

    Friedman, Douglas C; Alper, Joe

    2014-01-01

    "Technological Challenges in Antibiotic Discovery and Development is the summary of a workshop convened by the Chemical Sciences Roundtable in September 2013 to explore the current state of antibiotic...

  13. 国内外高频振动筛技术与设备现状及发展趋势%Current situation and development tendency of high-frequency vibration screen technology and equipments at home and abroad

    Institute of Scientific and Technical Information of China (English)

    赵环帅; 鲍玉新; 陈思元; 杨秀秀

    2011-01-01

    The paper introduces the main technical characteristics of the high-frequency vibration screen and analyzes the study situation of high-frequency vibration screen technology at home and abroad. It briefly introduces the main characteristics of commonly used high-frequency vibration screens at present, and proposes the future development tendency of the high-frequency vibration screen according to current issues about the development of the high-frequency vibration screen. The proposed development tendency includes the application of advanced analysis software and testing tools for optimization and analysis, study on manufacturing process of the high-frequency vibration screen as well as study on structure of rubber springs, sieving plates and vibration exciters, study on relationship between technical parameters and process parameters, developing towards large scale and fineness, decreasing operation noise of the high-frequency vibration screen.%介绍了高频振动筛的主要工艺特点,对国内外高频振动筛技术的研究现状进行了分析,对目前市场上常见的高频振动筛的主要特点进行了简单介绍。针对目前高频振动筛发展存在的问题,提出了未来高频振动筛的发展趋势:采用先进的分析软件与测试工具进行优化分析;高频振动筛加工工艺、橡胶弹簧、筛板、激振器结构的研究;技术参数与工艺参数之间关系的研究;向大型化和精细化发展;降低高频振动筛工作噪声的方法等。

  14. Study on analysis technology of the leakage current from Power facilities by using the laser technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Won Bin; Lee, Bok Kyu; Ohk, Young Hwan [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center; Han, Min Koo; Seung, Hwang Bo; Kwack, Hee Ro; Kim, Jae Chul [Electrical Engineering and Science Research Institute (Korea, Republic of)

    1995-12-31

    In order to apply the laser technology to the power systems, we widely investigated and analyzed optic fiber technology for signal transmissions, optic-sensor technology for detecting the physical quantum such as mechanical and electrical, and the base technology of laser application. The prototype was designed to detect the whole and the third harmonic current, for the analysis of the leakage current from gapless arrester. Also, the device was designed for portable use and for on-line checking. This prototype enables us to store and analyze the data easily by using the computer. Those stored data can be used as the reference data for estimating the extent of badness by analyzing and evaluating the trend of the leakage current with time. (author). 36 refs., 78 figs.

  15. Development and Applications of Simulation Technology

    Institute of Scientific and Technical Information of China (English)

    WangZicai

    2004-01-01

    The developing process of simulation technology is discussed in view of its development, maturation and further development.The applications of simulation technology in the fields of national economy are introduced. Finally, the level and status quo of simulation technology home and overseas are analyzed, and its future trend in the new century is presented.

  16. Development of Peltier Current Lead for DC cable Hideo

    Science.gov (United States)

    Sugane; Hikichi, Yasuo; Minowa, Masahiro; Kawahara, Toshio; Watanabe, Hirofumi; Hamabe, Makoto; Yamaguchi, Sataro

    The widespread expectation is that superconducting technologies will be one of the effective technologies to decrease energy loss and improve efficiency in energy grids. Especially, in recent circumstances, applications connecting with renewable energy receive attention. Yamaguchi et al successfully developed 200 m-class superconducting direct current transmission and distribution system (CASER-2) in Chubu University and carried out the demonstration of this system. On this demonstration, "Peltier Current Lead (PCL)" was employed, wherein Peltier device was used for the purpose of pumping up the heat through the down-leads, It was observed that PCL reduced heat leak into cryostat as compared to usual Cu current leads on this demonstration, but some issues to be solved remained, such as heat-cycle performance etc.. In this paper, we designed a prototype PCL for the purpose of improvement of the mechanical strength and the durability for the heat cycle, and evaluated the performance.

  17. AUTOMATED TECHNOLOGY FOR CURRENT MAINTENANCE OF RAILWAY TRACK

    Directory of Open Access Journals (Sweden)

    Sychev Vyacheslav Petrovich

    2016-03-01

    Full Text Available In this paper the authors consider the possibility and provide specific solutions to create the automated system of track maintenance on the example of automation of technological operations to restore the equal elasticity of the undersleeper foundation. The relevance of the work stems from the fact that the modern and perspective requirements to the track maintenance in the conditions of the transition to high-speed, high-speed, high-tonnage traffic can be implemented only by switching to a new system of track maintenance based on the performance of work of specialized high-performance machines and on the new system with maximum opportunity for automation technology. More than half of the volume of works on the current maintenance of the tracks are the works on the removal of splashes, straightening and tamping of track, the technology of which can be divided into two components: calculation-evaluation and the generation of control actions on the railway track. Track machines are used extensively at the local bearing places of the occurrence of splashes on track sections or for continuous bearing plot ways to restore the equal elasticity of the undersleeper base and reduce the degree of non-uniformity deviations in rails’ position on level and in plan, as well as track subsidence. The bunker for filling the ballast may be mounted on additional frame or on offset brackets of the machine. The device for measuring the position of a railway track includes the means for measuring the deflections of the road, bending rise the track in the longitudinal profile and the position of the track on level (elevation of one rail in relation to another and the adjacent block determining the actual position of a railway track in plan, in longitudinal profile and on level. The block of determining the amount of ballast consists of interconnected devices for determining the value of shifts and raise of the track and the block of comparing the track raise values

  18. Development of RF linac for high-current applications

    Energy Technology Data Exchange (ETDEWEB)

    Chan, K.C.D.; Lawrence, G.P.; Schneider, J.D.

    1997-12-31

    High-current proton linacs are promising sources of neutrons for material processing and research applications. Recently, a linac design that makes use of a combination of normal-conducting (NC) and superconducting (SC) linac technologies has been proposed for the US Accelerator Production of Tritium Project. As a result, a multi-year engineering development and demonstration (ED and D) program is underway. In this paper, the authors will describe the design and merits of the NC/SC hybrid approach. The scope, technology issues, and present status of the ED and D Program, and the participation of industry will also be described.

  19. Presynaptic miniature GABAergic currents in developing interneurons.

    Science.gov (United States)

    Trigo, Federico F; Bouhours, Brice; Rostaing, Philippe; Papageorgiou, George; Corrie, John E T; Triller, Antoine; Ogden, David; Marty, Alain

    2010-04-29

    Miniature synaptic currents have long been known to represent random transmitter release under resting conditions, but much remains to be learned about their nature and function in central synapses. In this work, we describe a new class of miniature currents ("preminis") that arise by the autocrine activation of axonal receptors following random vesicular release. Preminis are prominent in gabaergic synapses made by cerebellar interneurons during the development of the molecular layer. Unlike ordinary miniature postsynaptic currents in the same cells, premini frequencies are strongly enhanced by subthreshold depolarization, suggesting that the membrane depolarization they produce belongs to a feedback loop regulating neurotransmitter release. Thus, preminis could guide the formation of the interneuron network by enhancing neurotransmitter release at recently formed synaptic contacts.

  20. Is China Developing an Independent Technology Capability?

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Are Chinese technology enterprises only the "hired laborers" of other countries? Does China possess high technology in a real sense? When will the country develop independent scientific and technological innovation? Those are not brand new questions. However, after the Chinese Government issued its National Guidelines on the Long- and Medium-Term Program for Science and Technology

  1. EMERGING TECHNOLOGY SUMMARY: ELECTRO-PURE ALTERNATING CURRENT ELECTROCOAGULATION

    Science.gov (United States)

    The Superfund Innovative Technology Evaluation (SITE) Program was authorized as part of the 1986 amendments to the Superfund legislation. It represents a joint effort between the U.S. Environmental Protection Agency’s (EPA) Office of Research and Development and Office of Solid W...

  2. High current ion source development at Frankfurt

    Energy Technology Data Exchange (ETDEWEB)

    Volk, K.; Klein, H.; Lakatos, A.; Maaser, A.; Weber, M. [Frankfurt Univ. (Germany). Inst. fuer Angewandte Physik

    1995-11-01

    The development of high current positive and negative ion sources is an essential issue for the next generation of high current linear accelerators. Especially, the design of the European Spallation Source facility (ESS) and the International Fusion Material Irradiation Test Facility (IFMIF) have increased the significance of high brightness hydrogen and deuterium sources. As an example, for the ESS facility, two H{sup -}-sources each delivering a 70 mA H{sup -}-beam in 1.45 ms pulses at a repetition rate of 50 Hz are necessary. A low emittance is another important prerequisite. The source must operate, while meeting the performance requirements, with a constancy and reliability over an acceptable period of time. The present paper summarizes the progress achieved in ion sources development of intense, single charge, positive and negative ion beams. (author) 16 figs., 7 refs.

  3. Current Status of Helium-3 Alternative Technologies for Nuclear Safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Henzlova, Daniela [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kouzes, R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McElroy, R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Peerani, P. [European Commission, Ispra (Italy). Joint Research Centre; Aspinall, M. [Hybrid Instruments Ltd., Birmingham (United Kingdom); Baird, K. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Bakel, A. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Borella, M. [SCK.CEN, Mol (Belgium); Bourne, M. [Univ. of Michigan, Ann Arbor, MI (United States); Bourva, L. [Canberra Ltd., Oxford (United Kingdom); Cave, F. [Hybrid Instruments Ltd., Birmingham (United Kingdom); Chandra, R. [Arktis Radiation Detectors Ltd., Zurich (Sweden); Chernikova, D. [Chalmers Univ. of Technology (Sweden); Croft, S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dermody, G. [Symetrica Inc., Maynard, MA (United States); Dougan, A. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Ely, J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fanchini, E. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Finocchiaro, P. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Gavron, Victor [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kureta, M. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Ianakiev, Kiril Dimitrov [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ishiyama, K. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Lee, T. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Martin, Ch. [Symetrica Inc., Maynard, MA (United States); McKinny, K. [GE Reuter-Stokes, Twinsburg, OH (United States); Menlove, Howard Olsen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Orton, Ch. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Pappalardo, A. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Pedersen, B. [European Commission, Ispra (Italy). Joint Research Centre; Peranteau, D. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Plenteda, R. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Pozzi, S. [Univ. of Michigan, Ann Arbor, MI (United States); Schear, M. [Symetrica Inc., Maynard, MA (United States); Seya, M. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Siciliano, E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stave, S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sun, L. [Proportional Technologies Inc., Houston, TX (United States); Swinhoe, Martyn Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Tagziria, H. [European Commission, Ispra (Italy). Joint Research Centre; Vaccaro, S. [DG Energy (Luxembourg); Takamine, J. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Weber, A. -L. [Inst. for Radiological Protection and Nuclear Safety (IRSN), Fontenay-aux-Roses (France); Yamaguchi, T. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Zhu, H. [National Nuclear Security Administration (NNSA), Washington, DC (United States)

    2015-12-01

    International safeguards inspectorates (e.g., International Atomic Energy Agency {IAEA}, or Euratom) rely heavily on neutron assay techniques, and in particular, on coincidence counters for the verification of declared nuclear materials under safeguards and for monitoring purposes. While 3He was readily available, the reliability, safety, ease of use, gamma-ray insensitivity, and high intrinsic thermal neutron detection efficiency of 3He-based detectors obviated the need for alternative detector technologies. However, the recent decline of the 3He gas supply has triggered international efforts to develop and field neutron detectors that make use of alternative materials. In response to this global effort, the U.S. Department of Energy’s (DOE) National Nuclear Security Administration (NNSA) and Euratom launched a joint effort aimed at bringing together international experts, technology users and developers in the field of nuclear safeguards to discuss and evaluate the proposed 3He alternative materials and technologies. The effort involved a series of two workshops focused on detailed overviews and viability assessments of various 3He alternative technologies for use in nuclear safeguards applications. The key objective was to provide a platform for collaborative discussions and technical presentations organized in a compact, workshop-like format to stimulate interactions among the participants. The meetings culminated in a benchmark exercise providing a unique opportunity for the first inter-comparison of several available alternative technologies. This report provides an overview of the alternative technology efforts presented during the two workshops along with a summary of the benchmarking activities and results. The workshop recommendations and key consensus observations are discussed in the report, and used to outline a proposed path forward and future needs foreseeable in the area of 3

  4. Medically relevant ElectroNeedle technology development.

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Carrie Frances; Thomas, Michael Loren; McClain, Jaime L.; Harper, Jason C.; Achyuthan, Komandoor E.; Ten Eyck, Gregory A.

    2008-11-01

    ElectroNeedles technology was developed as part of an earlier Grand Challenge effort on Bio-Micro Fuel Cell project. During this earlier work, the fabrication of the ElectroNeedles was accomplished along with proof-of-concept work on several electrochemically active analytes such as glucose, quinone and ferricyanide. Additionally, earlier work demonstrated technology potential in the field of immunosensors by specifically detecting Troponin, a cardiac biomarker. The current work focused upon fabrication process reproducibility of the ElectroNeedles and then using the devices to sensitively detect p-cresol, a biomarker for kidney failure or nephrotoxicity. Valuable lessons were learned regarding fabrication assurance and quality. The detection of p-cresol was accomplished by electrochemistry as well as using fluorescence to benchmark ElectroNeedles performance. Results from these studies will serve as a guide for the future fabrication processes involving ElectroNeedles as well as provide the groundwork necessary to expand technology applications. One paper has been accepted for publication acknowledging LDRD funding (K. E. Achyuthan et al, Comb. Chem. & HTS, 2008). We are exploring the scope for a second paper describing the applications potential of this technology.

  5. Current Application of Search Engines and Their Developing Trend

    Institute of Scientific and Technical Information of China (English)

    ZHANG Li; SHAO Shi-huang; WU Xiao-qiong; ZENG Xian-hui; FAN Xiao-wen

    2002-01-01

    The basic types of current search engines which can help users to perfume laborious information-gathering tasks on Internet is proposed. Basically, the search engines can be classified into index engine, directory engine and agent engine on WWW information service. The key technologies of web mine, automatic classifying of documents and ordering regulation of feedback information are discussed. Finally, the developing trend of search engines is pointed out by analyzing their practical application on World Wide Web.

  6. 焊接机器人技术现状与发展趋势的研究%Research on the Current Situation & Trends of Development for Welding Robots Technology

    Institute of Scientific and Technical Information of China (English)

    吕超荣

    2015-01-01

    Along with the continuous development of science and technology, the traditional manual welding technology already cannot satisfy the manufacturing requirements of quality and quantity for modern high technological products, the trend of welding automation is quite clear. In this paper, the author according to their own long-term working experience in welding robots with arc welding power supply, welding seam tracking technology, welding machine and peripheral e-quipment coordinated control technology and simulation technology etc., the four aspects analysis on the research status of welding robot technology, and virtual reality, welding robot control system and the intelligent convergence tech in mul-ti-sensor information technology development trend of welding robot technology are discussed.%随着科学技术的不断发展,传统手工焊接技术已然满足不了现代高技术产品制造的数量和质量的要求,焊接自动化生产的趋势十分明显。本文作者根据自身长期的工作经历,从焊接机器人用弧焊电源、焊缝跟踪技术、多台焊接机器人和外围设备的协调控制技术及仿真技术等四个方面分析了焊接机器人技术的研究现状,并从虚拟现实、焊接机器人控制系统及多传感器信息智能融和技术探讨了焊接机器人技术的发展趋势。

  7. DC Vs AC - War Of Currents For Future Power Systems A HVDC Technology Overview

    Directory of Open Access Journals (Sweden)

    Anil K. Rai

    2015-08-01

    Full Text Available DC vs AC discussion began in 1880s with development of first commercial power transmission in Wall Street New York. Later when AC technology came into notice by efforts of inventor and researcher Sir Nicola Tesla soon the advantages of AC transmission and AC devices overtook the DC technology. It was hoped that DC technology had lost battle of currents. Today with researches going on FACTS devices and bulk power transmission HVDC has again gained a reputation in power sector. Solution of this centuries old debate is to develop HVDC systems that assists HVAC systems for better performance stability and control

  8. Chemical sensors technology development planning workshop

    Energy Technology Data Exchange (ETDEWEB)

    Bastiaans, G.J.; Haas, W.J. Jr.; Junk, G.A. [eds.

    1993-03-01

    The workshop participants were asked to: (1) Assess the current capabilities of chemical sensor technologies for addressing US Department of Energy (DOE) Environmental Restoration and Waste Management (EM) needs; (2) Estimate potential near term (one to two years) and intermediate term (three to five years) capabilities for addressing those needs; and (3) Generate a ranked list of specific recommendations on what research and development (R&D) should be funded to provide the necessary capabilities. The needs were described in terms of two pervasive EM problems, the in situ determination of chlorinated volatile organic compounds (VOCs), and selected metals in various matrices at DOE sites. The R&D recommendations were to be ranked according to the estimated likelihood that the product technology will be ready for application within the time frame it is needed and the estimated return on investment. The principal conclusions and recommendations of the workshop are as follows: Chemical sensors capable of in situ determinations can significantly reduce analytical costs; Chemical sensors have been developed for certain VOCs in gases and water but none are currently capable of in situ determination of VOCs in soils; The DOE need for in situ determination of metals in soils cannot be addressed with existing chemical sensors and the prospects for their availability in three to five years are uncertain; Adaptation, if necessary, and field application of laboratory analytical instruments and those few chemical sensors that are already in field testing is the best approach for the near term; The chemical sensor technology development plan should include balanced support for near- and intermediate-term efforts.

  9. Current Development Situation and Prospects of Blueberry in Guangdong Province

    Institute of Scientific and Technical Information of China (English)

    Lixia; GAO; Hualan; XIAO; Sen; LI; Fengmin; LIU; Aiqiong; MO

    2015-01-01

    With high nutrition and health value,blueberry receives much concern in recent years. Blueberry experts in the world are cultivating new blueberry varieties. They have come up with constructive theoretical support and planting technology researches and are constantly devoted to expanding blueberry planting latitudes. This paper elaborated researches of blueberry at home and abroad,current development situation of blueberry in China and Guangdong Province,analyzed strengths of planting blueberry in Guangdong. Besides,it came up with recommendations for development of blueberry industry. Finally,it discussed development prospects of blueberry planting in Guangdong.

  10. Mechanical and electrical integration of the current situation and development trend of technology%浅析机电一体化技术的现状和发展趋势

    Institute of Scientific and Technical Information of China (English)

    满昌华; 洪兆国; 王建

    2011-01-01

    Man Chang - hua,Hong Zhao - guo,Wang Jian Abstract Mechatronies is the inevitable development of modem science and technology results, the paper outlines the basic overview of mechatronics technology and development background. Reviewed the status ,of mechatronies technology at home and abroad, analyzes the development trend of mechatronics.%机电一体化是现代科学技术发展的必然结果,该文简述了机电一体化技术的基本概要和发展背景,综述了国内外机电一体化技术的现状,分析了机电一体化技术的发展趋势。

  11. A Survey of Current Rotorcraft Propulsion Health Monitoring Technologies

    Science.gov (United States)

    Delgado, Irebert R.; Dempsey, Paula J.; Simon, Donald L.

    2012-01-01

    A brief review is presented on the state-of-the-art in rotorcraft engine health monitoring technologies including summaries on current practices in the area of sensors, data acquisition, monitoring and analysis. Also, presented are guidelines for verification and validation of Health Usage Monitoring System (HUMS) and specifically for maintenance credits to extend part life. Finally, a number of new efforts in HUMS are summarized as well as lessons learned and future challenges. In particular, gaps are identified to supporting maintenance credits to extend rotorcraft engine part life. A number of data sources were consulted and include results from a survey from the HUMS community, Society of Automotive Engineers (SAE) documents, American Helicopter Society (AHS) papers, as well as references from Defence Science & Technology Organization (DSTO), Civil Aviation Authority (CAA), and Federal Aviation Administration (FAA).

  12. Development of superconductor application technology

    Energy Technology Data Exchange (ETDEWEB)

    Hong, G. W.; Kim, C. J.; Lee, H. G.; Lee, H. J.; Kim, K. B.; Won, D. Y.; Jang, K. I.; Kwon, S. C.; Kim, W. J.; Ji, Y. A.; Yang, S. W.; Kim, W. K.; Park, S. D.; Lee, M. H.; Lee, D. M.; Park, H. W.; Yu, J. K.; Lee, I. S.; Kim, J. J.; Choi, H. S.; Chu, Y.; Kim, Y. S.; Kim, D. H.

    1997-09-01

    Fabrication of high Tc bulk superconductor and its application, fabrication of superconducting wire for electric power device and analysis for cryogenic system were carried out for developing superconductor application technologies for electric power system. High quality YBaCuO bulk superconductor was fabricated by controlling initial powder preparation process and prototype flywheel energy storage device was designed basically. The superconducting levitation force measuring device was made to examine the property of prepared superconductor specimen. Systematic studies onthe method of starting powder preparation, mechanical fabrication process, heat treatment condition and analysis of plastic deformation were carried out to increase the stability and reproducibility of superconducting wire. A starting power with good reactivity and fine particle size was obtained by mechanical grinding, control of phase assemblage, and emulsion drying method. Ag/BSCCO tape with good cross sectional shape and Jc of 20,000 A/cm{sup 2} was fabricated by applying CIP packing procedure. Multifilamentary wire with Jc of 10,000 A/cm{sup 2} was fabricated by rolling method using square billet as starting shape. The joining of the multifilamentary wire was done by etching and pressing process and showed 50% of joining efficiency. Analysis on the heat loss in cryostat for high Tc superconducting device was carried out for optimum design of the future cryogenic system. (author). 66 refs., 104 figs.

  13. Managing Innovation and Technology in Developing Countries

    CERN Document Server

    Ali, Murad; Khan, Pervez

    2009-01-01

    Innovation and technology management is an inevitable issue in the high end technological and innovative organizations. Today, most of the innovations are limited with developed countries like USA, Japan and Europe while developing countries are still behind in the field of innovation and management of technology. But it is also becoming a subject for rapid progress and development in developing countries. Innovation and technology environment in developing countries are by nature, problematic, characterized by poor business models, political instability and governance conditions, low education level and lack of world-class research universities, an underdeveloped and mediocre physical infrastructure, and lack of solid technology based on trained human resources. This paper provides a theoretical and conceptual framework analysis for managing innovation and technology in developing countries like India and China. We present the issues and challenges in innovation and technology management and come up with pro...

  14. Policy issues inherent in advanced technology development

    Energy Technology Data Exchange (ETDEWEB)

    Baumann, P.D.

    1994-12-31

    In the development of advanced technologies, there are several forces which are involved in the success of the development of those technologies. In the overall development of new technologies, a sufficient number of these forces must be present and working in order to have a successful opportunity at developing, introducing and integrating into the marketplace a new technology. This paper discusses some of these forces and how they enter into the equation for success in advanced technology research, development, demonstration, commercialization and deployment. This paper limits itself to programs which are generally governmental funded, which in essence represent most of the technology development efforts that provide defense, energy and environmental technological products. Along with the identification of these forces are some suggestions as to how changes may be brought about to better ensure success in a long term to attempt to minimize time and financial losses.

  15. DEVELOPMENT OF TECHNOLOGY FOR ANODE BALL PRODUCTION

    Directory of Open Access Journals (Sweden)

    G. V. Kozhevnikova

    2015-01-01

    Full Text Available Technology of copper anode balls manufacturing by means of cross-wedge rolling method is developed. The technology satisfies the requirements towards anode balls’ crystalline structure, form and geometrical dimensions accuracy.

  16. Energy Storage (II): Developing Advanced Technologies

    Science.gov (United States)

    Robinson, Arthur L

    1974-01-01

    Energy storage, considered by some scientists to be the best technological and economic advancement after advanced nuclear power, still rates only modest funding for research concerning the development of advanced technologies. (PEB)

  17. Colombian capital goods industry and technological development.

    OpenAIRE

    Zuleta LA; Londono JL; Uribe JD

    1982-01-01

    ILO pub-WEP pub. Working paper, capital goods, technology, industrial development, trends, 1955-1978, Colombia - supply and demand, choice of product, Innovation, technology transfer, obstacles, tariff policy, research policy. Bibliography, diagram, statistical tables.

  18. FY-95 technology catalog. Technology development for buried waste remediation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    The US Department of Energy`s (DOE) Buried Waste Integrated Demonstration (BWID) program, which is now part of the Landfill Stabilization Focus Area (LSFA), supports applied research, development, demonstration, and evaluation of a multitude of advanced technologies dealing with underground radioactive and hazardous waste remediation. These innovative technologies are being developed as part of integrated comprehensive remediation systems for the effective and efficient remediation of buried waste sites throughout the DOE complex. These efforts are identified and coordinated in support of Environmental Restoration (EM-40) and Waste Management (EM-30) needs and objectives. Sponsored by the DOE Office of Technology Development (EM-50), BWID and LSFA work with universities and private industry to develop technologies that are being transferred to the private sector for use nationally and internationally. This report contains the details of the purpose, logic, and methodology used to develop and demonstrate DOE buried waste remediation technologies. It also provides a catalog of technologies and capabilities with development status for potential users. Past FY-92 through FY-94 technology testing, field trials, and demonstrations are summarized. Continuing and new FY-95 technology demonstrations also are described.

  19. Success factors in technology development

    Science.gov (United States)

    Preston, John T.

    1995-01-01

    Universities in the U.S. have a significant impact on business through the transfer of technology. This paper describes goals and philosophy of the Technology Licensing Office at the Massachusetts Institute of Technology. This paper also relates the critical factors for susscessful technology transfer, particularly relating to new business formation. These critical factors include the quality of the technology, the quality of the management, the quality of the investor, the passion for success, and the image of the company. Descriptions of three different levels of investment are also given and the most successful level of investment for starting a new company is reviewed. Licensing to large companies is also briefly reviewed, as this type of licensing requires some different strategies than that of licensing to start-up companies. High quality critical factors and intelligent investment create rewards for the parties and successful ventures.

  20. The wearable cardioverter-defibrillator: current technology and evolving indications.

    Science.gov (United States)

    Reek, Sven; Burri, Haran; Roberts, Paul R; Perings, Christian; Epstein, Andrew E; Klein, Helmut U

    2016-10-04

    The wearable cardioverter-defibrillator has been available for over a decade and now is frequently prescribed for patients deemed at high arrhythmic risk in whom the underlying pathology is potentially reversible or who are awaiting an implantable cardioverter-defibrillator. The use of the wearable cardioverter-defibrillator is included in the new 2015 ESC guidelines for the management of ventricular arrhythmias and prevention of sudden cardiac death. The present review provides insight into the current technology and an overview of this approach.

  1. Vaccination Against Dengue: Challenges and Current Developments.

    Science.gov (United States)

    Guy, Bruno; Lang, Jean; Saville, Melanie; Jackson, Nicholas

    2016-01-01

    Dengue is a growing threat worldwide, and the development of a vaccine is a public health priority. The completion of the active phase of two pivotal efficacy studies conducted in Asia and Latin America by Sanofi Pasteur has constituted an important step. Several other approaches are under development, and whichever technology is used, vaccine developers face several challenges linked to the particular nature and etiology of dengue disease. We start our review by defining questions and potential issues linked to dengue pathology and presenting the main types of vaccine approaches that have explored these questions; some of these candidates are in a late stage of clinical development. In the second part of the review, we focus on the Sanofi Pasteur dengue vaccine candidate, describing the steps from research to phase III efficacy studies. Finally, we discuss what could be the next steps, before and after vaccine introduction, to ensure that the vaccine will provide the best benefit with an acceptable safety profile to the identified target populations.

  2. Current and Emerging Technology for Continuous Glucose Monitoring

    Directory of Open Access Journals (Sweden)

    Cheng Chen

    2017-01-01

    Full Text Available Diabetes has become a leading cause of death worldwide. Although there is no cure for diabetes, blood glucose monitoring combined with appropriate medication can enhance treatment efficiency, alleviate the symptoms, as well as diminish the complications. For point-of-care purposes, continuous glucose monitoring (CGM devices are considered to be the best candidates for diabetes therapy. This review focuses on current growth areas of CGM technologies, specifically focusing on subcutaneous implantable electrochemical glucose sensors. The superiority of CGM systems is introduced firstly, and then the strategies for fabrication of minimally-invasive and non-invasive CGM biosensors are discussed, respectively. Finally, we briefly outline the current status and future perspective for CGM systems.

  3. Mobile Sensor Technologies Being Developed

    Science.gov (United States)

    Greer, Lawrence C.; Oberle, Lawrence G.

    2003-01-01

    The NASA Glenn Research Center is developing small mobile platforms for sensor placement, as well as methods for communicating between roving platforms and a central command location. The first part of this project is to use commercially available equipment to miniaturize an existing sensor platform. We developed a five-circuit-board suite, with an average board size of 1.5 by 3 cm. Shown in the preceding photograph, this suite provides all motor control, direction finding, and communications capabilities for a 27- by 21- by 40-mm prototype mobile platform. The second part of the project is to provide communications between mobile platforms, and also between multiple platforms and a central command location. This is accomplished with a low-power network labeled "SPAN," Sensor Platform Area Network, a local area network made up of proximity elements. In practice, these proximity elements are composed of fixed- and mobile-sensor-laden science packages that communicate to each other via radiofrequency links. Data in the network will be shared by a central command location that will pass information into and out of the network through its access to a backbone element. The result will be a protocol portable to general purpose microcontrollers satisfying a host of sensor networking tasks. This network will enter the gap somewhere between television remotes and Bluetooth but, unlike 802.15.4, will not specify a physical layer, thus allowing for many data rates over optical, acoustical, radiofrequency, hardwire, or other media. Since the protocol will exist as portable C-code, developers may be able to embed it in a host of microcontrollers from commercial to space grade and, of course, to design it into ASICs. Unlike in 802.15.4, the nodes will relate to each other as peers. A demonstration of this protocol using the two test bed platforms was recently held. Two NASA modified, commercially available, mobile platforms communicated and shared data with each other and a

  4. Recent Developments in Detector Technology

    CERN Document Server

    Brau, James E

    2010-01-01

    This review provides an overview of many recent advances in detector technologies for particle physics experiments. Challenges for new technologies include increasing spatial and temporal sensitivity, speed, and radiation hardness while minimizing power and cost. Applications are directed at several future collider experiments, including the Large Hadron Collider luminosity upgrade (sLHC), the linear collider, and the super high luminosity B factory, as well as neutrino and other fixed target experiments, and direct dark matter searches. Furthermore, particle physics has moved into space, with significant contributions of detector technology, and new challenges for future efforts.

  5. Review: DNA microarray technology and drug development

    Directory of Open Access Journals (Sweden)

    Sana Khan

    2010-01-01

    Full Text Available On the contrary to slow and non specific traditional drug discovery methods, DNA microarray technology could accelerate the identification of potential drugs for treating diseases like cancer, AIDS and provide fruitful results in the drug discovery. The technique provides efficient automation and maximum flexibility to the researchers and can test thousand compounds at a time. Scientists find DNA microarray useful in disease diagnosis, monitoring desired and adverse outcomes of therapeutic interventions, as well as, in the selection, assessment and quality con-trol of the potential drugs. In the current scenario, where new pathogens are expected every year, DNA microarray promises as an efficient technology to detect new organisms in a short time. Classification of carcinomas at the molecular level and prediction of how various types of tumor respond to different therapeutic agents can be made possible with the use of microarray analysis. Also, microarray technique can prove instrumental in personalized medicines development by providing microarray data of a patient which could be used for identifying diseases, treatment specific to individual and trailing disease prognosis. Microarray analysis could be beneficial in the area of molecular medicines for analysis of genetic variations and functions of genes in normal individuals and diseased conditions. The technique can give satisfactory results in single nucleotide polymorphism (SNP analysis and pharmacogenomics studies. The challenges that arise with the technology are high degree of variability with data obtained, frequent up gradation of methods and machines and lack of trained manpower. Despite this, DNA micro-array promises to be the next generation sequencer which could explain how organisms evolve and adapt looking at the whole genome. In a nutshell, Microarray technology makes it possible for molecular biologists to analyze simultaneously thousands of DNA samples and monitor their

  6. Clean Coal Technologies in China: Current Status and Future Perspectives

    Directory of Open Access Journals (Sweden)

    Shiyan Chang

    2016-12-01

    Full Text Available Coal is the dominant primary energy source in China and the major source of greenhouse gases and air pollutants. To facilitate the use of coal in an environmentally satisfactory and economically viable way, clean coal technologies (CCTs are necessary. This paper presents a review of recent research and development of four kinds of CCTs: coal power generation; coal conversion; pollution control; and carbon capture, utilization, and storage. It also outlines future perspectives on directions for technology research and development (R&D. This review shows that China has made remarkable progress in the R&D of CCTs, and that a number of CCTs have now entered into the commercialization stage.

  7. Overview of current additive manufacturing technologies and selected applications.

    Science.gov (United States)

    Horn, Timothy J; Harrysson, Ola L A

    2012-01-01

    Three-dimensional printing or rapid prototyping are processes by which components are fabricated directly from computer models by selectively curing, depositing or consolidating materials in successive layers. These technologies have traditionally been limited to the fabrication of models suitable for product visualization but, over the past decade, have quickly developed into a new paradigm called additive manufacturing. We are now beginning to see additive manufacturing used for the fabrication of a range of functional end use components. In this review, we briefly discuss the evolution of additive manufacturing from its roots in accelerating product development to its proliferation into a variety of fields. Here, we focus on some of the key technologies that are advancing additive manufacturing and present some state of the art applications.

  8. Additive Manufacturing Technology Development Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The 3D Printing In Zero-G (3D Print) technology demonstration project is a proof-of-concept test designed to assess the properties of melt deposition modeling...

  9. Development of heating device / development of the high current ion source for neutral beam injection

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Heon Ju; Lee, Dong Gyu; Lee, Kyong Jin; Ko Tae Kyong [Cheju National Univ., Cheju (Korea)

    1998-08-01

    The design and fabrication of a high current ion source for NBI was carried out. The scale of an ion source was reduced for mock-up test. To develop the high current ion source with the high operational stability and the long lifetime, the parameters including an arc current, gas pressure and extraction voltage should be optimized. If fabricated ion source would be tested, its parameters could be optimized experimentally. Through the optimization of the ion source parameter, the core technology for NBI is established and the experiment of current drive in the fusion device can be performed. This technology also can be applied to the ion beam technology in the field of new material synthesis and semiconductor industry. 24 refs., 22 figs., 13 tabs. (Author)

  10. Small Orbital Stereo Tracking Camera Technology Development

    Science.gov (United States)

    Bryan, Tom; MacLeod, Todd; Gagliano, Larry

    2016-01-01

    On-Orbit Small Debris Tracking and Characterization is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crew. This poses a major risk of MOD damage to ISS and Exploration vehicles. In 2015 this technology was added to NASA's Office of Chief Technologist roadmap. For missions flying in or assembled in or staging from LEO, the physical threat to vehicle and crew is needed in order to properly design the proper level of MOD impact shielding and proper mission design restrictions. Need to verify debris flux and size population versus ground RADAR tracking. Use of ISS for In-Situ Orbital Debris Tracking development provides attitude, power, data and orbital access without a dedicated spacecraft or restricted operations on-board a host vehicle as a secondary payload. Sensor Applicable to in-situ measuring orbital debris in flux and population in other orbits or on other vehicles. Could enhance safety on and around ISS. Some technologies extensible to monitoring of extraterrestrial debris as well To help accomplish this, new technologies must be developed quickly. The Small Orbital Stereo Tracking Camera is one such up and coming technology. It consists of flying a pair of intensified megapixel telephoto cameras to evaluate Orbital Debris (OD) monitoring in proximity of International Space Station. It will demonstrate on-orbit optical tracking (in situ) of various sized objects versus ground RADAR tracking and small OD models. The cameras are based on Flight Proven Advanced Video Guidance Sensor pixel to spot algorithms (Orbital Express) and military targeting cameras. And by using twin cameras we can provide Stereo images for ranging & mission redundancy. When pointed into the orbital velocity vector (RAM), objects approaching or near the stereo camera set can be differentiated from the stars moving upward in background.

  11. Development of Pollution Prevention Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Polle, Juergen [Brooklyn College, The City University of New York (CUNY), Brooklyn, New York, (United States); Sanchez-Delgado, Roberto [Brooklyn College, The City University of New York (CUNY), Brooklyn, New York, (United States)

    2013-12-30

    This project investigated technologies that may reduce environmental pollution. This was a basic research/educational project addressing two major areas: A. In the algae research project, newly isolated strains of microalgae were investigated for feedstock production to address the production of renewable fuels. An existing collection of microalgae was screened for lipid composition to determine strains with superior composition of biofuel molecules. As many microalgae store triacylglycerides in so-called oil bodies, selected candidate strains identified from the first screen that accumulate oil bodies were selected for further biochemical analysis, because almost nothing was known about the biochemistry of these oil bodies. Understanding sequestration of triacylglycerides in intracellular storage compartments is essential to developing better strains for achieving high oil productivities by microalgae. At the onset of the project there was almost no information available on how to obtain detailed profiles of lipids from strains of microalgae. Our research developed analytical methods to determine the lipid profiles of novel microalgal strains. The project was embedded into other ongoing microalgal projects in the Polle laboratory. The project benefited the public, because students were trained in cell cultivation and in the operation of state-of-the-art analytical equipment. In addition, students at Brooklyn College were introduced into the concept of a systems biology approach to study algal biofuels production. B. A series of new nanostructured catalysts were synthesized, and characterized by a variety of physical and chemical methods. Our catalyst design leads to active nanostructures comprising small metal particles in intimate contact with strongly basic sites provided by the supports, which include poly(4-vinylpyridine), magnesium oxide, functionalized multi-walled carbon nanotubes, and graphene oxide. The new materials display a good potential as catalysts

  12. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-05-15

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  13. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-11-04

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  14. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2006-09-30

    This Technical Progress Report describes progress made on the twenty nine subprojects awarded in the second year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices.

  15. Safeguards and Security Technology Development Directory. FY 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    The Safeguards and Security Technology Development Directory is published annually by the Office of Safeguards and Security (OSS) of the US Department of Energy (DOE), and is Intended to inform recipients of the full scope of the OSS R&D program. It is distributed for use by DOE headquarters personnel, DOE program offices, DOE field offices, DOE operating contractors, national laboratories, other federal agencies, and foreign governments. Chapters 1 through 7 of the Directory provide general information regarding the Technology Development Program, including the mission, program description, organizational roles and responsibilities, technology development lifecycle, requirements analysis, program formulation, the task selection process, technology development infrastructure, technology transfer activities, and current research and development tasks. These chapters are followed by a series of appendices which contain more specific information on aspects of the Program. Appendix A is a summary of major technology development accomplishments made during FY 1992. Appendix B lists S&S technology development reports issued during FY 1992 which reflect work accomplished through the OSS Technology Development Program and other relevant activities outside the Program. Finally, Appendix C summarizes the individual task statements which comprise the FY 1993 Technology Development Program.

  16. Development of Technology Readiness Level (TRL) Metrics and Risk Measures

    Energy Technology Data Exchange (ETDEWEB)

    Engel, David W.; Dalton, Angela C.; Anderson, K. K.; Sivaramakrishnan, Chandrika; Lansing, Carina

    2012-10-01

    This is an internal project milestone report to document the CCSI Element 7 team's progress on developing Technology Readiness Level (TRL) metrics and risk measures. In this report, we provide a brief overview of the current technology readiness assessment research, document the development of technology readiness levels (TRLs) specific to carbon capture technologies, describe the risk measures and uncertainty quantification approaches used in our research, and conclude by discussing the next steps that the CCSI Task 7 team aims to accomplish.

  17. Dental laboratory technology education in China: current situation and challenges.

    Science.gov (United States)

    Zheng, Liwei; Yue, Li; Zhou, Min; Yu, Haiyang

    2013-03-01

    Modern dentistry and dental education in China were first introduced from abroad by Dr. Lindsay in 1907. However, advancements in the field of dental laboratory technology did not occur to the same degree in specialties such as prosthodontics and orthodontics. Since the 1990s, orders from abroad demanding dental appliances surged as the image of China as the "world's factory" strengthened. The assembly line model, in which technicians work like simple procedure workers, was rapidly applied to denture production, while the traditional education system and apprenticeship systems demonstrated little progress in these years. The lack of advancement in dental laboratory technology education caused insufficient development in China's dental technology industry. In order to alter the situation, a four-year dental laboratory technology undergraduate educational program was established in 2005 by West China School of Stomatology, Sichuan University (WCSS, SCU). This program was based on SCU's undergraduate education and WCSS's junior college education systems. The program introduced scientific methods in relevant subjects into laboratory technicians' training and made many improvements in the availability of trained faculty, textbooks, laboratory facilities, and curriculum.

  18. [Current problems of information technologies application for forces medical service].

    Science.gov (United States)

    Ivanov, V V; Korneenkov, A A; Bogomolov, V D; Borisov, D N; Rezvantsev, M V

    2013-06-01

    The modern information technologies are the key factors for the upgrading of forces medical service. The aim of this article is the analysis of prospective information technologies application for the upgrading of forces medical service. The authors suggested 3 concepts of information support of Russian military health care on the basis of data about information technologies application in the foreign armed forces, analysis of the regulatory background, prospects of military-medical service and gathered experience of specialists. These three concepts are: development of united telecommunication network of the medical service of the Armed Forces of the Russian Federation medical service, working out and implementation of standard medical information systems for medical units and establishments, monitoring the military personnel health state and military medical service resources. It is noted that on the assumption of sufficient centralized financing and industrial implementation of the military medical service prospective information technologies, by the year 2020 the united information space of the military medical service will be created and the target information support effectiveness will be achieved.

  19. Space Science &Technology in Mauritius: Current Status and Future Opportunities

    Science.gov (United States)

    Rughooputh, S. D. D. V.; Beeharry, G. K.; Golap, K.; Issur, N. H.; Somanah, R.; Rughooputh, H. C. S.; Udayashankar, N.; Mueller, K.

    Space research (with either direct or indirect spin-offs) has been instrumental in leading to accomplishments that are meant to improve our quality of life in its broadest perspective. But are we all acquainted of the now proven-use of these findings and their capabilities? What do these mean to a remote small insular developing state like Mauritius? This paper explores the recent developments in this field in Mauritius and how we intend to optimize the use of the emerging technologies. Initiatives of the University of Mauritius are highlighted.

  20. History of nuclear technology development in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, Kiyonobu, E-mail: yamashita.kiyonobu@jaea.go.jp [Visiting Professor, at the Faculty of Petroleum and Renewable Energy Engineering, University Teknologi Malaysia Johor Bahru 81310 (Malaysia); General Advisor Nuclear HRD Centre, Japan Atomic Energy Agency, TOKAI-mura, NAKA-gun, IBARAKI-ken, 319-1195 (Japan)

    2015-04-29

    Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

  1. Capture technologies: Improvements and promising developments

    NARCIS (Netherlands)

    Blomen, E.; Hendriks, C.; Neele, F.

    2009-01-01

    In this status report we want to provide a comprehensive overview of the current status and promising technologies of CO2 capture by means of a literature review, in-house knowledge and interviews. We describe the technology, bottlenecks towards implementation and potential use. The results will be

  2. EMI Architecture and Technology Development Plan

    CERN Document Server

    Balazs, K.

    2013-01-01

    This document provides a brief overview of the EMI architecture and the technology development directions presented by the four EMI technology areas and by EMI partners. The report represents the final revision of EMI technology planning covering a time period beyond the project end.

  3. Clean Technology Evaluation & Workforce Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Glaza

    2012-12-01

    The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

  4. Technology Development Roadmaps - a Systematic Approach to Maturing Needed Technologies

    Energy Technology Data Exchange (ETDEWEB)

    John W. Colllins; Layne Pincock

    2010-07-01

    Abstract. Planning and decision making represent important challenges for all projects. This paper presents the steps needed to assess technical readiness and determine the path forward to mature the technologies required for the Next Generation Nuclear Plant. A Technology Readiness Assessment is used to evaluate the required systems, subsystems, and components (SSC) comprising the desired plant architecture and assess the SSCs against established Technology Readiness Levels (TRLs). A validated TRL baseline is then established for the proposed physical design. Technology Development Roadmaps are generated to define the path forward and focus project research and development and engineering tasks on advancing the technologies to increasing levels of maturity. Tasks include modeling, testing, bench-scale demonstrations, pilot-scale demonstrations, and fully integrated prototype demonstrations. The roadmaps identify precise project objectives and requirements; create a consensus vision of project needs; provide a structured, defensible, decision-based project plan; and, minimize project costs and schedules.

  5. Engineering research, development and technology FY99

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R T

    2000-02-01

    The growth of computer power and connectivity, together with advances in wireless sensing and communication technologies, is transforming the field of complex distributed systems. The ability to deploy large numbers of sensors with a rapid, broadband communication system will enable high-fidelity, near real-time monitoring of complex systems. These technological developments will provide unprecedented insight into the actual performance of engineered and natural environment systems, enable the evolution of many new types of engineered systems for monitoring and detection, and enhance our ability to perform improved and validated large-scale simulations of complex systems. One of the challenges facing engineering is to develop methodologies to exploit the emerging information technologies. Particularly important will be the ability to assimilate measured data into the simulation process in a way which is much more sophisticated than current, primarily ad hoc procedures. The reports contained in this section on the Center for Complex Distributed Systems describe activities related to the integrated engineering of large complex systems. The first three papers describe recent developments for each link of the integrated engineering process for large structural systems. These include (1) the development of model-based signal processing algorithms which will formalize the process of coupling measurements and simulation and provide a rigorous methodology for validation and update of computational models; (2) collaborative efforts with faculty at the University of California at Berkeley on the development of massive simulation models for the earth and large bridge structures; and (3) the development of wireless data acquisition systems which provide a practical means of monitoring large systems like the National Ignition Facility (NIF) optical support structures. These successful developments are coming to a confluence in the next year with applications to NIF structural

  6. Radioactive Dry Process Material Treatment Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. J.; Hung, I. H.; Kim, K. K. (and others)

    2007-06-15

    The project 'Radioactive Dry Process Material Treatment Technology Development' aims to be normal operation for the experiments at DUPIC fuel development facility (DFDF) and safe operation of the facility through the technology developments such as remote operation, maintenance and pair of the facility, treatment of various high level process wastes and trapping of volatile process gases. DUPIC Fuel Development Facility (DFDF) can accommodate highly active nuclear materials, and now it is for fabrication of the oxide fuel by dry process characterizing the proliferation resistance. During the second stage from march 2005 to February 2007, we carried out technology development of the remote maintenance and the DFDF's safe operation, development of treatment technology for process off-gas, and development of treatment technology for PWR cladding hull and the results was described in this report.

  7. Innovative Technology Development Program. Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    Beller, J.

    1995-08-01

    Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT&E) Program. The plan is part of the DOE`s program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE`s clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process.

  8. Open Technology Development: Roadmap Plan

    Science.gov (United States)

    2006-04-01

    Linux Apache MySql (PHP/ Perl /Python) integrated services. This standardized "stack" of open source technologies enables robust web based information...ACTD Office • Sue Payton, AS&C Office • LTG Robert M. Shea, Joint Staff, J-6 • David Scantling, OSD, Business Transformation Office • Fritz

  9. CURRENT ANSTO RESEARCH ON WASTEFORM DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    Vance, E.R.; Perera, D.S.; Stewart, M.W.A.; Begg, B.D.; Carter, M.L.; Day, R.A.; Moricca, S.; Smith, K.L.; Lumpkin, G.R.; Hanna, J.V.

    2003-02-27

    Current ANSTO scientific research on wasteform development for mainly high-level radioactive waste is directed towards practical applications. Titanate wasteform products we have developed or are developing are aimed at immobilization of: (a) tank wastes and sludges; (b) U-rich wastes from radioisotope production from reactor irradiation of UO2 targets; (c) Al-rich wastes arising from reprocessing of Al-clad fuels; (d) 99Tc; (e) high- Mo wastes arising from reprocessing of U-Mo fuels and (f) partitioned Cs-rich wastes. Other wasteforms include encapsulated zeolites or silica/alumina beads for immobilization of 129I. Wasteform production techniques cover hot isostatic and uniaxial pressing, sintering, and cold-crucible melting. In addition, building on previous work on speciation and leach resistance of Cs in cementitious products, we are studying geopolymers. Although we have a strong focus on candidate wasteforms for actual wastes, we have a considerable program directed at basic understanding of the wasteforms in regard to crystal chemistry, their dissolution behavior in aqueous media, radiation damage effects and processing techniques.

  10. NADIR: A Flexible Archiving System Current Development

    Science.gov (United States)

    Knapic, C.; De Marco, M.; Smareglia, R.; Molinaro, M.

    2014-05-01

    The New Archiving Distributed InfrastructuRe (NADIR) is under development at the Italian center for Astronomical Archives (IA2) to increase the performances of the current archival software tools at the data center. Traditional softwares usually offer simple and robust solutions to perform data archive and distribution but are awkward to adapt and reuse in projects that have different purposes. Data evolution in terms of data model, format, publication policy, version, and meta-data content are the main threats to re-usage. NADIR, using stable and mature framework features, answers those very challenging issues. Its main characteristics are a configuration database, a multi threading and multi language environment (C++, Java, Python), special features to guarantee high scalability, modularity, robustness, error tracking, and tools to monitor with confidence the status of each project at each archiving site. In this contribution, the development of the core components is presented, commenting also on some performance and innovative features (multi-cast and publisher-subscriber paradigms). NADIR is planned to be developed as simply as possible with default configurations for every project, first of all for LBT and other IA2 projects.

  11. Current developments in pediatric liver transplantation

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    In 1953, the pioneer of human orthotopic liver transplantation(LT), Thomas E Starzl, was the first to attemptan orthotopic liver transplant into a 3 years old patientsuffering from biliary atresia. Thus, the first LT in humanswas attempted in a disease, which, up until today,remains the main indication for pediatric LT (pLT). Duringthe last sixty years, refinements in diagnostics and surgicaltechnique, the introduction of new immunosuppressivemedications and improvements in perioperative pediatriccare have established LT as routine procedure forchildhood acute and chronic liver failure as well asinherited liver diseases. In contrast to adult recipients,pLT differs greatly in indications for LT, allocation practice,surgical technique, immunosuppression and postoperativelife-long aftercare. Many aspects are focus ofongoing preclinical and clinical research. The presentreview gives an overview of current developments andthe clinical outcome of pLT, with a focus on alternativesto full-size deceased-donor organ transplantation.

  12. A low-noise current preamplifier in 120 nm CMOS technology

    Directory of Open Access Journals (Sweden)

    H. Uhrmann

    2008-05-01

    Full Text Available In this paper we examine the impact of deep sub-micron CMOS technology on analog circuit design with a special focus on the noise performance and the ability to design low-noise preamplifiers. To point out, why CMOS technology can grow to a key technology in low-noise and high-speed applications, various amplifier stages, applied in literature, are compared. One, that fits as a current preamplifier for low-noise applications, is the current mirror. Starting from the basic current mirror, an enhanced current preamplifier is developed, that offers low-noise and high-speed operation. The suggested chip is realized in 0.12 μm CMOS technology and needs a chip area of 100 μm×280 μm. It consumes about 15 mW at a supply voltage of 1.5 V. The presented current preamplifier has a bandwidth of 750 MHz and a gain of 36 dB. The fields of application for current preamplifiers are, for instance, charge amplifiers, amplifiers for low-voltage differential signaling (LVDS based point-to-point data links or preamplifiers for photodetectors.

  13. KSC Education Technology Research and Development Plan

    Science.gov (United States)

    Odell, Michael R. L.

    2003-01-01

    Educational technology is facilitating new approaches to teaching and learning science, technology, engineering, and mathematics (STEM) education. Cognitive research is beginning to inform educators about how students learn providing a basis for design of more effective learning environments incorporating technology. At the same time, access to computers, the Internet and other technology tools are becoming common features in K-20 classrooms. Encouraged by these developments, STEM educators are transforming traditional STEM education into active learning environments that hold the promise of enhancing learning. This document illustrates the use of technology in STEM education today, identifies possible areas of development, links this development to the NASA Strategic Plan, and makes recommendations for the Kennedy Space Center (KSC) Education Office for consideration in the research, development, and design of new educational technologies and applications.

  14. Current Technological Improvements in Enzymes toward Their Biotechnological Applications

    Science.gov (United States)

    Baweja, Mehak; Nain, Lata; Kawarabayasi, Yutaka; Shukla, Pratyoosh

    2016-01-01

    Enzymes from extremophiles are creating interest among researchers due to their unique properties and the enormous power of catalysis at extreme conditions. Since community demands are getting more intensified, therefore, researchers are applying various approaches viz. metagenomics to increase the database of extremophilic species. Furthermore, the innovations are being made in the naturally occurring enzymes utilizing various tools of recombinant DNA technology and protein engineering, which allows redesigning of the enzymes for its better fitment into the process. In this review, we discuss the biochemical constraints of psychrophiles during survival at the lower temperature. We summarize the current knowledge about the sources of such enzymes and their in vitro modification through mutagenesis to explore their biotechnological potential. Finally, we recap the microbial cell surface display to enhance the efficiency of the process in cost effective way. PMID:27379087

  15. Low Temperature Heat Source Utilization Current and Advanced Technology

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, James H. Jr.; Dambly, Benjamin W.

    1992-06-01

    Once a geothermal heat source has been identified as having the potential for development, and its thermal, physical, and chemical characteristics have been determined, a method of utilization must be decided upon. This compendium will touch upon some of these concerns, and hopefully will provide the reader with a better understanding of technologies being developed that will be applicable to geothermal development in East Africa, as well as other parts of the world. The appendices contain detailed reports on Down-the-Well Turbo Pump, The Vapor-Turbine Cycle for Geothermal Power Generation, Heat Exchanger Design for Geothermal Power Plants, and a Feasibility Study of Combined Power and Water Desalting Plant Using Hot Geothermal Water. [DJE-2005

  16. Status of Propulsion Technology Development Under the NASA In-Space Propulsion Technology Program

    Science.gov (United States)

    Anderson, David; Kamhawi, Hani; Patterson, Mike; Pencil, Eric; Pinero, Luis; Falck, Robert; Dankanich, John

    2014-01-01

    Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing and delivering in-space propulsion technologies for NASA's Science Mission Directorate (SMD). These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, Flagship and sample return missions currently under consideration. The ISPT program is currently developing technology in three areas that include Propulsion System Technologies, Entry Vehicle Technologies, and Systems/Mission Analysis. ISPT's propulsion technologies include: 1) the 0.6-7 kW NASA's Evolutionary Xenon Thruster (NEXT) gridded ion propulsion system; 2) a 0.3-3.9kW Halleffect electric propulsion (HEP) system for low cost and sample return missions; 3) the Xenon Flow Control Module (XFCM); 4) ultra-lightweight propellant tank technologies (ULTT); and 5) propulsion technologies for a Mars Ascent Vehicle (MAV). The NEXT Long Duration Test (LDT) recently exceeded 50,000 hours of operation and 900 kg throughput, corresponding to 34.8 MN-s of total impulse delivered. The HEP system is composed of the High Voltage Hall Accelerator (HIVHAC) thruster, a power processing unit (PPU), and the XFCM. NEXT and the HIVHAC are throttle-able electric propulsion systems for planetary science missions. The XFCM and ULTT are two component technologies which being developed with nearer-term flight infusion in mind. Several of the ISPT technologies are related to sample return missions needs: MAV propulsion and electric propulsion. And finally, one focus of the Systems/Mission Analysis area is developing tools that aid the application or operation of these technologies on wide variety of mission concepts. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness.

  17. Development Path for Agricultural Modernization of Shaanxi Province from the Perspective of Technological Progress

    Institute of Scientific and Technical Information of China (English)

    Lufeng; DUAN

    2013-01-01

    The lag in technological innovation is a bottleneck for modern agricultural development,so technological progress is an inevitable path to break this bottleneck. On the basis of introducing theory of technological progress,this study presents 4 paths for promoting agricultural modernization development in line with current situations of agricultural development and technological progress in Shaanxi Province.

  18. Technological Developments in Networking, Education and Automation

    CERN Document Server

    Elleithy, Khaled; Iskander, Magued; Kapila, Vikram; Karim, Mohammad A; Mahmood, Ausif

    2010-01-01

    "Technological Developments in Networking, Education and Automation" includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the following areas: Computer Networks: Access Technologies, Medium Access Control, Network architectures and Equipment, Optical Networks and Switching, Telecommunication Technology, and Ultra Wideband Communications. Engineering Education and Online Learning: including development of courses and systems for engineering, technical and liberal studies programs; online laboratories; intelligent

  19. Technology readiness levels for advanced nuclear fuels and materials development

    Energy Technology Data Exchange (ETDEWEB)

    Carmack, W.J., E-mail: jon.carmack@inl.gov [Idaho National Laboratory, Idaho Falls, ID (United States); Braase, L.A.; Wigeland, R.A. [Idaho National Laboratory, Idaho Falls, ID (United States); Todosow, M. [Brookhaven National Laboratory, Upton, NY (United States)

    2017-03-15

    Highlights: • Definition of nuclear fuels system technology readiness level. • Identification of evaluation criteria for nuclear fuel system TRLs. • Application of TRLs to fuel systems. - Abstract: The Technology Readiness process quantitatively assesses the maturity of a given technology. The National Aeronautics and Space Administration (NASA) pioneered the process in the 1980s to inform the development and deployment of new systems for space applications. The process was subsequently adopted by the Department of Defense (DoD) to develop and deploy new technology and systems for defense applications. It was also adopted by the Department of Energy (DOE) to evaluate the maturity of new technologies in major construction projects. Advanced nuclear fuels and materials development is needed to improve the performance and safety of current and advanced reactors, and ultimately close the nuclear fuel cycle. Because deployment of new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the assessment process to advanced fuel development is useful as a management, communication, and tracking tool. This article provides definition of technology readiness levels (TRLs) for nuclear fuel technology as well as selected examples regarding the methods by which TRLs are currently used to assess the maturity of nuclear fuels and materials under development in the DOE Fuel Cycle Research and Development (FCRD) Program within the Advanced Fuels Campaign (AFC).

  20. Microhole Drilling Tractor Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Western Well Tool

    2007-07-09

    In an effort to increase the U.S. energy reserves and lower costs for finding and retrieving oil, the USDOE created a solicitation to encourage industry to focus on means to operate in small diameter well-Microhole. Partially in response to this solicitation and because Western Well Tool's (WWT) corporate objective to develop small diameter coiled tubing drilling tractor, WWT responded to and was awarded a contract to design, prototype, shop test, and field demonstrate a Microhole Drilling Tractor (MDT). The benefit to the oil industry and the US consumer from the project is that with the MDT's ability to facilitate Coiled Tubing drilled wells to be 1000-3000 feet longer horizontally, US brown fields can be more efficiently exploited resulting in fewer wells, less environmental impact, greater and faster oil recovery, and lower drilling costs. Shortly after award of the contract, WWT was approached by a major oil company that strongly indicated that the specified size of a tractor of 3.0 inches diameter was inappropriate and that immediate applications for a 3.38-inch diameter tractor would substantially increase the usefulness of the tool to the oil industry. Based on this along with an understanding with the oil company to use the tractor in multiple field applications, WWT applied for and was granted a no-cost change-of-scope contract amendment to design, manufacture, assemble, shop test and field demonstrate a prototype a 3.38 inch diameter MDT. Utilizing existing WWT tractor technology and conforming to an industry developed specification for the tool, the Microhole Drilling Tractor was designed. Specific features of the MDT that increase it usefulness are: (1) Operation on differential pressure of the drilling fluid, (2) On-Off Capability, (3) Patented unique gripping elements (4) High strength and flexibility, (5) Compatibility to existing Coiled Tubing drilling equipment and operations. The ability to power the MDT with drilling fluid results in a

  1. Miniature-MCA technology developments

    Energy Technology Data Exchange (ETDEWEB)

    Halbig, J.K.; Klosterbuer, S.F.; Stephens, M.M.; Biddle, R.S.

    1991-12-31

    We have recently reduced the size of multichannel analyzers (MCAs) and have implemented more features in hardware to relieve software requirements. We built and tested a spectroscopy grade, 4096-channel MCA. Exclusive of amplifier and power supply, it fits on two boards each approximately 7 by 15 cm. This paper discusses the features and performance of the analyzer and some reasonable applications of these technologies.

  2. KNOWLEDGE SYNTHESIS IN TECHNOLOGY DEVELOPMENT

    Institute of Scientific and Technical Information of China (English)

    Yukihiro YAMASHITA; Yoshiteru NAKAMORI; Andrzej P. WIERZBICKI

    2009-01-01

    This paper introduces a knowledge construction model called the i-System for knowledge integration and creation and its relation to the new concept of the Creative Space. The five ontological elements of the i-System are Intelligence, Involvement, Imagination, Intervention, and Integration corresponding to five diverse dimensions of the Creative Space. The paper discusses the meanings and functions of these dimensions in knowledge integration and creation, and presents applications of the i-System to technology roadmapping and archiving.

  3. Energy technology progress for sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Arvizu, D.E.; Drennen, T.E.

    1997-03-01

    Energy security is a fundamental part of a country`s national security. Access to affordable, environmentally sustainable energy is a stabilizing force and is in the world community`s best interest. The current global energy situation however is not sustainable and has many complicating factors. The primary goal for government energy policy should be to provide stability and predictability to the market. This paper differentiates between short-term and long-term issues and argues that although the options for addressing the short-term issues are limited, there is an opportunity to alter the course of long-term energy stability and predictability through research and technology development. While reliance on foreign oil in the short term can be consistent with short-term energy security goals, there are sufficient long-term issues associated with fossil fuel use, in particular, as to require a long-term role for the federal government in funding research. The longer term issues fall into three categories. First, oil resources are finite and there is increasing world dependence on a limited number of suppliers. Second, the world demographics are changing dramatically and the emerging industrialized nations will have greater supply needs. Third, increasing attention to the environmental impacts of energy production and use will limit supply options. In addition to this global view, some of the changes occurring in the US domestic energy picture have implications that will encourage energy efficiency and new technology development. The paper concludes that technological innovation has provided a great benefit in the past and can continue to do so in the future if it is both channels toward a sustainable energy future and if it is committed to, and invested in, as a deliberate long-term policy option.

  4. Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

    Energy Technology Data Exchange (ETDEWEB)

    Moe, Wayne Leland [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

  5. Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

    Energy Technology Data Exchange (ETDEWEB)

    Moe, Wayne L.

    2017-08-23

    This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However, it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory

  6. The Development and Current State of Translation Process Research

    DEFF Research Database (Denmark)

    Lykke Jakobsen, Arnt

    2014-01-01

    The development and current state of translation process research ch Arnt Lykke Jakobsen Copenhagen Business School lInterest in process-oriented translation studies has been intense for the past almost half a century. Translation process research (TPR) is the label we have used to refer to a spe......The development and current state of translation process research ch Arnt Lykke Jakobsen Copenhagen Business School lInterest in process-oriented translation studies has been intense for the past almost half a century. Translation process research (TPR) is the label we have used to refer...... to a special descriptive, empirical, experimental approach to translation studies based on close, technology-supported observation of translational (micro)behaviour. Fundamentally, TPR is based on software which logs a translator’s keystrokes on a computer keyboard in time in combination with an eyetracker...

  7. [Robotic colorectal surgery: current status and future developments].

    Science.gov (United States)

    Jayne, D

    2013-08-01

    Robotic assistance has the potential to compensate for the limitations inherent in standard laparoscopic surgery. The daVinci® surgical system remains the only currently available commercial robotic system. It has found popularity in rectal cancer surgery where its application has consistently been shown to reduce the need to convert to open surgery. With this exception, the technological advances of the robotic system have not so far translated into any reproducible patient benefit. The first part of this manuscript presents an overview of the current daVinci® platform, its applications, the evidence base and future developments in colorectal surgery. The second part of the manuscript looks at other robot systems in development and the different innovations and strategies taken to advance minimally invasive surgery.The English full-text version of this article is available at SpringerLink (under supplemental).

  8. Aligning Technology Education Teaching with Brain Development

    Science.gov (United States)

    Katsioloudis, Petros

    2015-01-01

    This exploratory study was designed to determine if there is a level of alignment between technology education curriculum and theories of intellectual development. The researcher compared Epstein's Brain Growth Theory and Piaget's Status of Intellectual Development with technology education curriculum from Australia, England, and the United…

  9. Social and Technological Development in Context

    DEFF Research Database (Denmark)

    Koch, Christian

    1997-01-01

    This papers studies the processes developing technology and its social "sorroundings", the social networks. Positions in the debate on technological change is discussed. A central topic is the enterprise external development and decision processes and their interplay with the enterprise internal...

  10. Current developments in equine cataract surgery.

    Science.gov (United States)

    McMullen, R J; Utter, M E

    2010-03-01

    The purpose of this review is to discuss the evolution of equine cataract surgery over the past 50 years to its current stage. Equine cataract surgery is performed similarly compared with the techniques used in human ophthalmology and in other veterinary species. However, enough differences exist to make surgical lens removal and intraocular lens implantation in the horse an intrinsically unique endeavour. Due to the size of the adult equine globe, the introduction of species-specific instrumentation has provided the cornerstone to many of the changes made regarding surgical technique over the last 15-20 years. The continuing development of an equine specific, foldable intraocular lens implant (IOL) has provided much needed data supporting the use of such lenses in the horse to improve upon the post operative visual outcome. Finally, the methods utilised to assess visual capacity and the effects of intraocular lens implantation on the globe (e.g. ocular ultrasonography, electroretinography and streak retinoscopy) are gradually becoming more important in preoperative patient assessment and IOL development in the horse. It is the hope of the authors that a broader group of equine veterinarians will become aware of the many changes that have taken place in equine cataract surgery over the last half-century. Although aspiration was implemented nearly 40 years ago in foals for the treatment of congenital cataracts, phacofragmentation (phacoemulsification) techniques have only recently become routine in mature horses undergoing lens extraction.

  11. IPRs, Technological Development, and Economic Development

    NARCIS (Netherlands)

    W.A. Dolfsma (Wilfred)

    2006-01-01

    textabstractIn the year 2000 some $142 billion in royalties were paid internationally by users of a specific piece of knowledge that were protected under Intellectual Property Right law (IPR) to those parties that owned these rights. Under current circumstances where knowledge & innovation play an

  12. IPRs, Technological Development, and Economic Development

    NARCIS (Netherlands)

    W.A. Dolfsma (Wilfred)

    2006-01-01

    textabstractIn the year 2000 some $142 billion in royalties were paid internationally by users of a specific piece of knowledge that were protected under Intellectual Property Right law (IPR) to those parties that owned these rights. Under current circumstances where knowledge & innovation play an

  13. TECHNOLOGICAL DEVELOPMENT MANAGEMENT UNDER GLOBALIZATION CONDITIONS

    Directory of Open Access Journals (Sweden)

    Vasyl H. Gerasymchuk

    2007-10-01

    Full Text Available The research reveals a studying of scientific and technical development of enterprise in the context of globalization processes. The authors placed high emphasis on the specification of peculiarities and theoretical aspects of scientific and technical development of enterprise, the studying of impact of scientific and technical factors of economic development. The R&D financing in Ukraine and the strong and weak sides of application of model of technological development at international technology transfer are analyzed in the paper.

  14. Development of technologies for solar energy utilization

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    With relation to the development of photovoltaic power systems for practical use, studies were made on thin-substrate polycrystalline solar cells and thin-film solar cells as manufacturing technology for solar cells for practical use. The technological development for super-high efficiency solar cells was also being advanced. Besides, the research and development have been conducted of evaluation technology for photovoltaic power systems and systems to utilize the photovoltaic power generation and peripheral technologies. The demonstrative research on photovoltaic power systems was continued. The international cooperative research on photovoltaic power systems was also made. The development of a manufacturing system for compound semiconductors for solar cells was carried out. As to the development of solar energy system technologies for industrial use, a study of elemental technologies was first made, and next the development of an advanced heat process type solar energy system was commenced. In addition, the research on passive solar systems was made. An investigational study was carried out of technologies for solar cities and solar energy snow melting systems. As international joint projects, studies were made of solar heat timber/cacao drying plants, etc. The paper also commented on projects for international cooperation for the technological development of solar energy utilization systems. 26 figs., 15 tabs.

  15. Overview of Compressed Air Energy Storage and Technology Development

    Directory of Open Access Journals (Sweden)

    Jidai Wang

    2017-07-01

    Full Text Available With the increase of power generation from renewable energy sources and due to their intermittent nature, the power grid is facing the great challenge in maintaining the power network stability and reliability. To address the challenge, one of the options is to detach the power generation from consumption via energy storage. The intention of this paper is to give an overview of the current technology developments in compressed air energy storage (CAES and the future direction of the technology development in this area. Compared with other energy storage technologies, CAES is proven to be a clean and sustainable type of energy storage with the unique features of high capacity and long-duration of the storage. Its scale and cost are similar to pumped hydroelectric storage (PHS, thus CAES has attracted much attention in recent years while further development for PHS is restricted by the availability of suitable geological locations. The paper presents the state-of-the-art of current CAES technology development, analyses the major technological barriers/weaknesses and proposes suggestions for future technology development. This paper should provide a useful reference for CAES technology research and development strategy.

  16. Courseware Development for Semiconductor Technology and Its Application into Instruction

    Science.gov (United States)

    Tsai, Shu-chiao

    2009-01-01

    This study reports on the development of ESP (English for specific purposes) courseware for semiconductor technology and its integration as a "silent partner" into instruction. This kind of team-teaching could help overcome current problems encountered in developing ESP in Taiwan. The content of the material under discussion includes general…

  17. Current Development of Health Food Technology in Taiwan Food Industry Research and Development Institute%台湾保健食品技术发展之现况

    Institute of Scientific and Technical Information of China (English)

    朱燕华; 袁国芳; 杨炳辉; 廖启成

    2011-01-01

    The elevation of living standard, education and understanding of health importance are the driving force to create the development of Taiwan health food industry. Biotechnology application is the most prominent target in the food industry. Most of the health foods are expected to have better quality and zero hazard, which are produced from the novel materials or processing, or further extended to the utilization of biotechnology, nanotechnology, bio-nutrition and preventive medicine knowledge. This article are briefly discussed the development of health food in Taiwan.%台湾保健食品产业因人们生活水平的提升以及对健康观念的重视而日益蓬勃发展.在保健食品产业中,生物技术产业是最受瞩目的明星产业.通过利用生物技术开发出高附加价值的健康食品.保健食品的产出大多利用现有或新颖的食品加工技术与原料,或再延伸应用生物科技、奈米技术、生化营养及预防医学知识,创造出更加安全、营养的健康食品.现对台湾保健食品产业技术发展作一概述.

  18. Development of coal energy utilization technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Coal liquefaction produces new and clean energy by performing hydrogenation, decomposition and liquefaction on coal under high temperatures and pressures. NEDO has been developing bituminous coal liquefaction technologies by using a 150-t/d pilot plant. It has also developed quality improving and utilization technologies for liquefied coal, whose practical use is expected. For developing coal gasification technologies, construction is in progress for a 200-t/d pilot plant for spouted bed gasification power generation. NEDO intends to develop coal gasification composite cycle power generation with high efficiency and of environment harmonious type. This paper summarizes the results obtained during fiscal 1994. It also dwells on technologies to manufacture hydrogen from coal. It further describes development of technologies to manufacture methane and substituting natural gas (SNG) by hydrogenating and gasifying coal. The ARCH process can select three operation modes depending on which of SNG yield, thermal efficiency or BTX yield is targeted. With respect to promotion of coal utilization technologies, description is given on surveys on development of next generation technologies for coal utilization, and clean coal technology promotion projects. International coal utilization and application projects are also described. 9 figs., 3 tabs.

  19. Technologies for a sustainable development; Technologies pour un developpement durable

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The European Event on Technology (EET), a recurrent annual event since 1992, is a major meeting opportunity for researchers and engineers as well as private and public decision-makers, on technologies, their evolution and their industrial and social implications. In less than a decade, sustainable development has become both an economic and a political priority. It was urgent and legitimate that those who are the mainsprings should take hold of the subject and give it technological content, estimate its costs and define clear timetables. The debates consist of: plenary sessions on environmental, social and economic stakes of sustainable development and the challenges for, and commitment of engineers, managers and politicians with respect to these goals; and workshops, which provide an overview of recently acquired or upcoming technologies developed by sector: energy, transports, new information technologies, new industrial manufacturing technologies (materials, products, services), waste management, global environment monitoring, water management, bio-technologies, and innovation management. This document brings together the different talks given by the participants. Among these, the following ones fall into the energy and environment scope: energy efficiency of buildings: towards energy autonomy; superconductors enable in new millennium for electric power industry; advanced gas micro-turbine-driven generator technology; environmental and technical challenges of an offshore wind farm; future nuclear energy systems; modelling combustion in engines: progress and prospects for reducing emissions; on-board computers: reduction in consumption and emissions of engine-transmission units for vehicles; polymer-lithium batteries: perspectives for zero-emission traction; hybrid vehicles and energy/environmental optimization: paths and opportunities; fuel cells and zero-emission: perspectives and developments; global change: causes, modeling and economic issues; the GMES

  20. Vaccine development for tuberculosis: current progress.

    Science.gov (United States)

    Orme, Ian M

    2013-07-01

    Very substantial efforts have been made over the past decade or more to develop vaccines against tuberculosis. Historically, this began with a view to replace the current vaccine, Bacillus Calmette Guérin (BCG), but more recently most candidates are either new forms of this bacillus, or are designed to boost immunity in children given BCG as infants. Good progress is being made, but very few have, as yet, progressed into clinical trials. The leading candidate has advanced to phase IIb efficacy testing, with disappointing results. This article discusses the various types of vaccines, including those designed to be used in a prophylactic setting, either alone or BCG-boosting, true therapeutic (post-exposure) vaccines, and therapeutic vaccines designed to augment chemotherapy. While there is no doubt that progress is still being made, we have a growing awareness of the limitations of our animal model screening processes, further amplified by the fact that we still do not have a clear picture of the immunological responses involved, and the precise type of long-lived immunity that effective new vaccines will need to induce.

  1. Vaccine development for tuberculosis: current progress

    Science.gov (United States)

    Orme, Ian M.

    2013-01-01

    Very substantial efforts have been made over the past decade or more to develop vaccines against tuberculosis. Historically, this began with a view to replace the current vaccine, BCG, but more recently most candidates are either new forms of this bacillus, or are designed to boost immunity in children given BCG as infants. Good progress is being made, but very few have as yet progressed into clinical trials. The leading candidate has advanced to Phase IIb efficacy testing, with disappointing results. This article discusses the various types of vaccines, including those designed to be used in a prophylactic setting, either alone or BCG-boosting, true therapeutic [post-exposure] vaccines, and therapeutic vaccines designed to augment chemotherapy. While there is no doubt that progress is still being made, we have a growing awareness of the limitations of our animal model screening processes, further amplified by the fact that we still do not have a clear picture of the immunological responses involved, and the precise type of long lived immunity we will need effective new vaccines to induce. PMID:23794129

  2. Development of BSCCO persistent current system

    Energy Technology Data Exchange (ETDEWEB)

    Joo, Jin Ho; Nah, Wan Soo; Kang, Hyung Koo; Yoo, Jung Hoon [Sungkyunkwan University, Seoul (Korea)

    1998-05-01

    We have developed temperature-variable critical current measurement device for high Tc superconducting wires. For this end, vacuum shroud was designed and fabricated, and that both signal lines and power lines into the vacuum shroud were installed on it. Secondly, the design procedures for the PCS were established for the high Tc superconducting wires based on the electrical circuit analyses during energizations. We have also evaluated mechanical properties such as hardness, strength and elongation of sheath alloys made by addition of Cu, Mg, Ti, Zr and Ni to Ag matrix using induction melting furnace. It was observed that hardness and strength were improved by increasing additive contents from 0.05 to 0.2 at.%. Specifically, the increment of strength was relatively higher for alloys made by addition of Mg, Cu and Zr elements than that made by Ni and Ti addition. On the other hand, elongation was measured to be significantly reduced for former sheath alloy materials. (author). 12 refs., 13 figs., 4 tabs.

  3. Current Developments in Nuclear Density Functional Methods

    CERN Document Server

    Dobaczewski, J

    2010-01-01

    Density functional theory (DFT) became a universal approach to compute ground-state and excited configurations of many-electron systems held together by an external one-body potential in condensed-matter, atomic, and molecular physics. At present, the DFT strategy is also intensely studied and applied in the area of nuclear structure. The nuclear DFT, a natural extension of the self-consistent mean-field theory, is a tool of choice for computations of ground-state properties and low-lying excitations of medium-mass and heavy nuclei. Over the past thirty-odd years, a lot of experience was accumulated in implementing, adjusting, and using the density-functional methods in nuclei. This research direction is still extremely actively pursued. In particular, current developments concentrate on (i) attempts to improve the performance and precision delivered by the nuclear density-functional methods, (ii) derivations of density functionals from first principles rooted in the low-energy chromodynamics and effective th...

  4. Review: DNA Microarray Technology and Drug Development

    Directory of Open Access Journals (Sweden)

    Sushma Drabu

    2010-01-01

    Full Text Available

    On the contrary to slow and non specific traditional drug discovery methods, DNA microarray technology could
    accelerate the identification of potential drugs for treating diseases like cancer, AIDS and provide fruitful results in
    the drug discovery. The technique provides efficient automation and maximum flexibility to the researchers and
    can test thousand compounds at a time. Scientists find DNA microarray useful in disease diagnosis, monitoring
    desired and adverse outcomes of therapeutic interventions, as well as, in the selection, assessment and quality control
    of the potential drugs. In the current scenario, where new pathogens are expected every year, DNA microarray
    promises as an efficient technology to detect new organisms in a short time. Classification of carcinomas at the
    molecular level and prediction of how various types of tumor respond to different therapeutic agents can be made
    possible with the use of microarray analysis. Also, microarray technique can prove instrumental in personalized
    medicines development by providing microarray data of a patient which could be used for identifying diseases,
    treatment specific to individual and trailing disease prognosis. Microarray analysis could be beneficial in the area
    of molecular medicines for analysis of genetic variations and functions of genes in normal individuals and diseased
    conditions. The technique can give satisfactory results in single nucleotide polymorphism (SNP analysis and
    pharmacogenomics studies. The challenges that arise with the technology are high degree of variability with data
    obtained, frequent up gradation of methods and machines and lack of trained manpower. Despite this, DNA microarray
    promises to be the next generation sequencer which could explain how organisms evolve and adapt looking
    at the whole

  5. Cleaner technology development--some practical steps for developing countries.

    Science.gov (United States)

    Rathi, A K A; Bhanujan, K V

    2004-10-01

    Cleaner technologies often originate from developed countries. Little developmental work is continued on the products sourced from developing countries. These products are by and large low value products generating large quantities of hazardous waste per unit of production. Methodology is proposed for phasing out such dirty technologies! products. The development of cleaner technologies is proposed for utilizing large quantity of hazardous waste generated from identified manufacturing process.

  6. Next stages in HDR technology development

    Energy Technology Data Exchange (ETDEWEB)

    Duchane, D.V.

    1993-03-01

    Twenty years of research and development have brought HDR heat mining technology from the purely conceptual stage to the establishment of an engineering-scale heat mine at Fenton Hill, NM. In April 1992, a long-term flow test (LTFT) of the HDR reservoir at Fenton Hill was begun. The test was carried out under steady-state conditions on a continuous basis for four months, but a major equipment failure in late July forced a temporary suspension of operations. Even this short test provided valuable information and extremely encouraging results as summarized below: There was no indication of thermal drawdown of the reservoir. There was evidence of increasing access to hot rock with time. Water consumption was in the rangki of 10--12%. Measured pumping costs were $0.003 per kilowatt of energy produced. Temperature logs conducted in the reservoir production zone during and after the flow test confirmed the fact that there was no decline in the average temperature of the fluid being produced from the reservoir. In fact, tracer testing showed that the fluid was taking more indirect pathways and thus contacting a greater amount of hot rock as the test progressed. Water usage quickly dropped to a level of 10--15 gallons per minute, an amount equivalent to about 10--12% of the injected fluid volume. At a conversion rate of 10--15%, these would translate to effective ``fuel costs`` of 2--3{cents} per kilowatt hour of electricity production potential. The completion of the LTFT will set the stage for commercialization of HDR but will not bring HDR technology to maturity. Relatively samples extensions of the current technology may bring significant improvements in efficiency, and these should be rapidly investigated. In the longer run, advanced operational concepts could further improve the efficiency of HDR energy extraction and may even offer the possibility of cogeneration schemes which solve both energy and water problems throughout the world.

  7. Small Orbital Stereo Tracking Camera Technology Development

    Science.gov (United States)

    Bryan, Tom; MacLeod, Todd; Gagliano, Larry

    2017-01-01

    Any exploration vehicle assembled or Spacecraft placed in LEO or GTO must pass through this debris cloud and survive. Large cross section, low thrust vehicles will spend more time spiraling out through the cloud and will suffer more impacts.Better knowledge of small debris will improve survival odds. Current estimated Density of debris at various orbital attitudes with notation of recent collisions and resulting spikes. Orbital Debris Tracking and Characterization has now been added to NASA Office of Chief Technologists Technology Development Roadmap in Technology Area 5 (TA5.7)[Orbital Debris Tracking and Characterization] and is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crews due to the risk of Orbital Debris damage to ISS Exploration vehicles. The Problem: Traditional orbital trackers looking for small, dim orbital derelicts and debris typically will stare at the stars and let any reflected light off the debris integrate in the imager for seconds, thus creating a streak across the image. The Solution: The Small Tracker will see Stars and other celestial objects rise through its Field of View (FOV) at the rotational rate of its orbit, but the glint off of orbital objects will move through the FOV at different rates and directions. Debris on a head-on collision course (or close) will stay in the FOV at 14 Km per sec. The Small Tracker can track at 60 frames per sec allowing up to 30 fixes before a near-miss pass. A Stereo pair of Small Trackers can provide range data within 5-7 Km for better orbit measurements.

  8. Technology Development Roadmap: A Technology Development Roadmap for a Future Gravitational Wave Mission

    Science.gov (United States)

    Camp, Jordan; Conklin, John; Livas, Jeffrey; Klipstein, William; McKenzie, Kirk; Mueller, Guido; Mueller, Juergen; Thorpe, James Ira; Arsenovic, Peter; Baker, John; Bender, Peter; Brinker, Edward; Crow, John; Spero, Robert; deVine Glenn; Ziemer, John

    2013-01-01

    Humankind will detect the first gravitational wave (GW) signals from the Universe in the current decade using ground-based detectors. But the richest trove of astrophysical information lies at lower frequencies in the spectrum only accessible from space. Signals are expected from merging massive black holes throughout cosmic history, from compact stellar remnants orbiting central galactic engines from thousands of close contact binary systems in the Milky Way, and possibly from exotic sources, some not yet imagined. These signals carry essential information not available from electromagnetic observations, and which can be extracted with extraordinary accuracy. For 20 years, NASA, the European Space Agency (ESA), and an international research community have put considerable effort into developing concepts and technologies for a GW mission. Both the 2000 and 2010 decadal surveys endorsed the science and mission concept of the Laser Interferometer Space Antenna (LISA). A partnership of the two agencies defined and analyzed the concept for a decade. The agencies partnered on LISA Pathfinder (LPF), and ESA-led technology demonstration mission, now preparing for a 2015 launch. Extensive technology development has been carried out on the ground. Currently, the evolved Laser Interferometer Space Antenna (eLISA) concept, a LISA-like concept with only two measurement arms, is competing for ESA's L2 opportunity. NASA's Astrophysics Division seeks to be a junior partner if eLISA is selected. If eLISA is not selected, then a LISA-like mission will be a strong contender in the 2020 decadal survey. This Technology Development Roadmap (TDR) builds on the LISA concept development, the LPF technology development, and the U.S. and European ground-based technology development. The eLISA architecture and the architecture of the Mid-sized Space-based Gravitational-wave Observatory (SGO Mid)-a competitive design with three measurement arms from the recent design study for a NASA

  9. Current state-of-the-art and future perspectives of robotic technology in neurosurgery.

    Science.gov (United States)

    Mattei, Tobias A; Rodriguez, Abraham Hafiz; Sambhara, Deepak; Mendel, Ehud

    2014-07-01

    Neurosurgery is one of the most demanding surgical specialties in terms of precision requirements and surgical field limitations. Recent advancements in robotic technology have generated the possibility of incorporating advanced technological tools to the neurosurgical operating room. Although previous studies have addressed the specific details of new robotic systems, there is very little literature on the strengths and drawbacks of past attempts, currently available platforms and prototypes in development. In this review, the authors present a critical historical analysis of the development of robotic technology in neurosurgery as well as a comprehensive summary of the currently available systems that can be expected to be incorporated to the neurosurgical armamentarium in the near future. Finally, the authors present a critical analysis of the main technical challenges in robotic technology development at the present time (such as the design of improved systems for haptic feedback and the necessity of incorporating intraoperative imaging data) as well as the benefits which robotic technology is expected to bring to specific neurosurgical subspecialties in the near future.

  10. Development of nuclear transmutation technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Seok; Song, Tae Young; Yoo, Jae Kwon; Choi, Byung Ho; Shin, Hee Sung; Gil, Chung Sup; Kim, Jung Do

    1997-08-01

    A basic characteristics and neutronic code development for accelerator driven subcritical reactor have been performed. In the field of basic characteristic study, the world-wide technical trends for a subcritical reactor has been investigated and some new directions for the subcritical system development were investigated. For the analysis of subcritical reactor core, a Montecarlo depletion code was developed by combining LAHET code with ORIGEN2 code. In addition, one-point kinetics equation for subcritical reactor programmed in order to analyze the dynamic behavior of subcritical core. (author). 26 tabs., 49 figs.

  11. THE DEVELOPMENT OF INTELLIGENT MANAGEMENT USING CLOUDE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    U. A. Vishniakou

    2016-01-01

    Full Text Available The human intelligenсe (HI simulation problems and the development directions of intelligence technologies are analyzed. Artificial intelligence restrictions in compare with HI are shown. The future integrated intelligence systems will be based on advanced technologies of human intelligence. If currently there is no silicon realization of HI memory and its processing, the elements of such realization may be executed with use of clouding technologies. The particularities of cloud computing are given and its implementation for the development of the modern intelligent management are considered.

  12. Concept and technology development for HOPE spaceplane

    Science.gov (United States)

    Ito, Testsuichi; Akimoto, Toshio; Miyaba, Hiroshi; Kano, Yasuomi; Suzuki, Norio

    1990-10-01

    HOPE spaceplane has been studied for several years in NASDA. The purpose of the current study is to establish the feasible concept of HOPE and to prepare the technical bases. The primary mission of HOPE is the Space Station Freedom/JEM logistics transportation complementing with U.S. Space Shuttle fleet. Besides previous concept of ten ton class orbiter launched by H-II rocket, extended size orbiter concept has been studied along with enhancement of H-II rocket, which is called H-IID (derivative) rocket. An orbiter derived from this study weighs 20t at lift off and has three to five tons of payload capability, based on the H-IID configuration of H-II first stage with six solid boosters strapped on. Subsystems design and technology development in such field as aerodynamics, structure and materials, guidance-navigation and control, and Space Station interface are in progress. In order to acquire the reentry flight data, orbital reentry experiment is planned and under development utilizing orbital flight opportunity of H-II test flight in 1993. These concepts are under review and trade off in NASDA for establishing HOPE development scenario.

  13. Coherent Architecture Development as a Basis for Technology Development

    DEFF Research Database (Denmark)

    Ravn, Poul Martin

    coherence. Despite the acceptance and results presented in multiple studies from the application of architectures, the research on architecture work in a technology development context is limited. Technologies are often developed and represented in the form of product sub-systems that are made available......The subject of this PhD thesis is architecture-centered design. It elaborates especially on two specific areas: the coherence in architectures in a technology development context and the identification of critical development areas via property-based reasoning, based on an understanding of cette...... for product developers. Technologies, which in their infancy indicate a 'jack of all trades, master of none', have a risk of being developed without a clearly defined need or identification of which products it can be used in. A common approach for developing such a technology includes exploration of what...

  14. Current approaches in SELEX: An update to aptamer selection technology.

    Science.gov (United States)

    Darmostuk, Mariia; Rimpelova, Silvie; Gbelcova, Helena; Ruml, Tomas

    2015-11-01

    Systematic evolution of ligands by exponential enrichment (SELEX) is a well-established and efficient technology for the generation of oligonucleotides with a high target affinity. These SELEX-derived single stranded DNA and RNA molecules, called aptamers, were selected against various targets, such as proteins, cells, microorganisms, chemical compounds etc. They have a great potential in the use as novel antibodies, in cancer theragnostics and in biomedical research. Vast interest in aptamers stimulated continuous development of SELEX, which underwent numerous modifications since its first application in 1990. Novel modifications made the selection process more efficient, cost-effective and significantly less time-consuming. This article brings a comprehensive and up-to-date review of recent advances in SELEX methods and pinpoints advantages, main obstacles and limitations. The post-SELEX strategies and examples of application are also briefly outlined in this review. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Development of krypton recovery and storage technology

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, Shin-ichiro; Shoji, Hisashi; Kurihara, Takayuki; Kawashima, Nobuyoshi [Japan Nuclear Cycle Development Inst., Tokai Works, Tokai, Ibaraki (Japan); Osawa, Toshiyuki; Yamato, Haruo; Aizawa, Toshihiro [Sanko Inc., Tokyo (Japan)

    2002-12-01

    The Krypton-Recovery Development Facility was constructed as a pilot plant which has a piratical capacity at Tokai Reprocessing Plant. Various tests such as performance confirmation corresponding to parameter changing of each process by cold test, safety assurance of confinement performance of radioactive gas etc. and confirmation of the krypton recovery rate by connecting run with the reprocessing process were executed in order to develop recovery and storage technology of radioactive krypton from the shearing and dissolution process off-gas aiming to reduce the release of radioactivity to the environment. As a result, it was assured that krypton recovery rate with a cryogenic distillation was beyond the target value of 90% as krypton recovery technology, and storage technology by high pressure cylinder method was established as storage technology of recovered krypton. The immobilization technology of recovered krypton that is necessary for long term storage by ion implantation method is under development. (author)

  16. Fabry disease - current treatment and new drug development.

    Science.gov (United States)

    Motabar, Omid; Sidransky, Ellen; Goldin, Ehud; Zheng, Wei

    2010-07-23

    Fabry disease is a rare inherited lysosomal storage disorder caused by a partial or complete deficiency of α-galactosidase A (GLA), resulting in the storage of excess cellular glycosphingolipids. Enzyme replacement therapy is available for the treatment of Fabry disease, but it is a costly, intravenous treatment. Alternative therapeutic approaches, including small molecule chaperone therapy, are currently being explored. High throughput screening (HTS) technologies can be utilized to discover other small molecule compounds, including non-inhibitory chaperones, enzyme activators, molecules that reduce GLA substrate, and molecules that activate GLA gene promoters. This review outlines the current therapeutic approaches, emerging treatment strategies, and the process of drug discovery and development for Fabry disease.

  17. Current Status on Stress Diagnostic Kit and Detection Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Hyun; Choi, Mi Hee; Ko, Kyong Cheol

    2008-06-15

    The accurate measurement of a stress level is one of the most important issues in a stress diagnosis and its measurement could be of great value in clinical medicine. Stress has a potent effect on the spirit and physical condition of an individual. There are various methods available for its measurement. Some of the commonly used techniques for the diagnosis of a stress level include analysis of the body fluids, questionnaire assessments, psychophysiological evaluations and by determining heart rate variability (HRV) of subjects. However, the existing diagnostic methods have several defects like, a low sensitivity, inaccuracy and long of operation time. In this report, we present a diagnostic technology to detect a stress level which is the origin of various diseases. This method can be of great help in providing an early diagnosis through a biosensor and might play a vital role in preventing diseases like hypochondria and hypertension. Majority of the human population is exposed to stress in one way or another and hence developing a convenient stress diagnosis kit will be of great use to all. This stress diagnostic kit and detection technology dose not involve simple a mechanical measurement or questionnaires, but is based on developing a detection kit with a high sensitivity, which will mean an easy use for common man. Individuals can undergo regular check ups and can personally diagnose their present situation of health by determining their stress levels, thus enabling them to diagnose the early onset of several stress disorders. This might help them take precautionary measures and thereby lead to a healthy life.

  18. Development of CANFLEX fuel fabrication technology

    Energy Technology Data Exchange (ETDEWEB)

    Kang, M. S.; Choi, C. B.; Park, C. H.; Kwon, W. J.; Kim, C. H.; Kim, B. J.; Koo, C. H.; Cho, D. S.; So, D. Y.; Suh, S. W.; Park, C. J.; Chang, D. H.; Yun, S. H. [KEPCO Nuclear Fuel Company, Taejeon (Korea)

    2000-04-01

    Wolsong Unit 1 as the first heavy water reactor in Korea has been in service for 17 years since 1983. It would be about the time to prepare a plan for the solution of problems due to aging of the reactor. The aging of CANDU reactor could lead especially to the steam generator cruding and pressure tube sagging and creep and then decreases the operation margin to make some problems on reactor operations and safety. The counterplan could be made in two ways. One is to repair or modify reactor itself. The other is to develop new advanced fuel to increase of CANDU operation margin effectively, so as to compensate the reduced operation margin. Therefore, the first objectives in the present R and D is to develop the CANFLEX-NU(CANDU Flexible fuelling-Natural Uranium) fuel as a CANDU advanced fuel. One of the improvements in CANDU fuel fabrication technology, and advanced method of Zr-Be brazing was developed. For the formation of Zr-Be alloy, preheating and main heating temperature in the furnace is 700 deg C, 1200 deg C respectively. In order to find an appropriate material for the brazing joints in the CANDU fuel, the composition of Zr based amorphous metals were designed. And, the effect of hydrogen on the mechanical properties of cladding sheath and feasibility of the eddy current test to evaluate quality of end cap weld were also studied for the fundamental research purpose. As a preliminary study to suggest optimal way for the mass production of CANFLEX-NU fuel at KNFC the existing CANDU fuel facilities and fabrication/inspection processes were reviewed. The best way is that the current CANDU facility shall be modified to produce small diametrial CANFLEX elements and a new facility shall be constructed to produce large diametrial CANFLEX fuel elements. 46 refs., 99 figs., 10 tabs. (Author)

  19. Technological opportunities and paths of development

    DEFF Research Database (Denmark)

    Plichta, Kirsten

    1993-01-01

    in the industry. 6) It is argued that such paths of incremental improvement at the industry level may be an outcome of a) the dynamics that produce the technological opportunities; b) the institutions that govern decisions and expectations and c) the criteria by which the chooses between different firms......Executive summary: 1) The technological development of firms in an industry is influenced by the opportunities for improving product and process, their ability to identify such opportunities and their ability to appropriate the benefit of the development effort. 2) Firms' historically developed...... technological knowledge, their production, development and other routines as well prior investments in products and production equipment play an important role with regard to the technological opportunities that firms' identify and select for development. 3) Because history matters and because firms are bounded...

  20. Constructive Technology Assessment for HIT development

    DEFF Research Database (Denmark)

    Høstgaard, Anna Marie Balling; Bertelsen, Pernille; Petersen, Lone Stub

    2013-01-01

    Experience and time has shown a need for new evaluation methods for evaluating Health Information Technology (HIT), as summative evaluation methods fail to accommodate the rapid and constant changes in HIT over time and to involve end-users, which has been recognized as an important success factor...... in HIT development. A new evaluation methodology, including an analytical framework, has been developed specifically for HIT development: Constructive Technology Assessment (CTA) for HIT. It offers solutions to both the problems associated with summative technology evaluation and a way to involve end......-users. The CTA methodology is based on a Socio-technical understanding of technological development as an open ended, emergent process. The CTA was used during the EHR development process in the Region of North Jutland where it proved successful inproviding learning and feedback between all relevant groups...

  1. A preliminary study of current multimedia information technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.C.

    1997-03-01

    This paper surveys more than 70 articles published in the IEEE Multimedia journal and other journals. The survey summarizes aspects of multimedia information technology and categorizes application areas of multimedia information technology and interesting research areas related to it.

  2. Integrated Micro Product and Technology Development

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

  3. Cognitive development in advanced mathematics using technology

    Science.gov (United States)

    Tall, David

    2000-12-01

    This paper considers cognitive development in mathematics and its relationship with computer technology, with special emphasis on the use of visual imagery and symbols and the later shift to formal axiomatic theories. At each stage, empirical evidence is presented to show how these forms of thinking are enhanced, changed, or impeded by the use of technology.

  4. Integrated Micro Product and Technology Development

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

  5. Development of PLC Technology in China

    Institute of Scientific and Technical Information of China (English)

    Liu Jianming; Cuiwei

    2005-01-01

    In China there built a large scale of power line communication (Abbr. PLC)testing network. This paper presents the research and development on PLC technology in China and also the application and popularization of PLC in Chinese market. At the end, the next focal points of PLC technology research are deeply discussed.

  6. Advances for prosthetic technology from historical perspective to current status to future application

    CERN Document Server

    LeMoyne, Robert

    2016-01-01

    This book focuses on the advances in transtibial prosthetic technology and targets research in the evolution of the powered prosthesis such as the BiOM, which was derived from considerable research and development at the Massachusetts Institute of Technology. The concept of the book spans the historical evolution of prosthetic applications from passive to new and futuristic robotic prosthetic technologies.  The author describes the reasons for amputation, surgical procedures, and an historical perspective of the prosthesis for the lower limb. He also addresses the phases and sub-phases of gait and compensatory mechanisms arising for a transtibial prosthesis and links the compensatory mechanisms to long-term morbidities.  The general technologies for gait analysis central to prosthetic design and the inherent biomechanics foundations for analysis are also explored.  The book reports on recent-past to current-term applications with passive elastic prostheses.  The core of the book deals with futuristic robo...

  7. A Roadmap for Strategic Development of Geothermal Exploration Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, Benjamin R. [SRA International Inc. and Geothermal Technologies Office, Washington, DC (United States); Ziagos, John [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Thorsteinsson, Hildigunnur [Geothermal Technologies Office, Washington, DC (United States); Hass, Eric [Geothermal Technologies Office, Golden, CO (United States)

    2013-02-13

    Characterizing productive geothermal systems is challenging yet critical to identify and develop an estimated 30 gigawatts electric (GWe) of undiscovered hydrothermal resources in the western U.S. This paper, undertaken by the U.S. Department of Energy’s Geothermal Technologies Office (GTO), summarizes needs and technical pathways that target the key geothermal signatures of temperature, permeability, and fluid content, and develops the time evolution of these pathways, tying in past and current GTO exploration Research and Development (R&D) projects. Beginning on a five-year timescale and projecting out to 2030, the paper assesses technologies that could accelerate the confirmation of 30 GWe. The resulting structure forms the basis for a Geothermal Exploration Technologies Roadmap, a strategic development plan to help guide GTO R&D investments that will lower the risk and cost of geothermal prospect identification. This roadmap is currently open for public comment. Send your comments to geothermal@ee.doe.gov.

  8. [Pharmaceutical technology: development and research].

    Science.gov (United States)

    Traisnel, M

    1994-06-01

    Production of pharmaceutics cannot be compared to the manufacture of consumer goods: pharmaceutical manufacturing is the study and bulk manufacture of the ingredients from which medicines are made, and is concerned with the mixing, preparing, packing, of the ingredients into a dosage form for the patient, in according to the good manufacturing practices (GMP). Development and manufacture are not discrete activities but links in a single chain of activity. Research and development, pharmaceutical training, regulatory requirements: these concepts are present with three ways: bioavailability, targeting and compliance.

  9. Technology development for DUPIC process safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Hong, J. S.; Kim, H. D.; Lee, Y. G.; Kang, H. Y.; Cha, H. R.; Byeon, K. H.; Park, Y. S.; Choi, H. N. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-07-01

    As the strategy for DUPIC(Direct Use of spent PWR fuel In CANDU reactor) process safeguards, the neutron detection method was introduced to account for nuclear materials in the whole DUPIC process by selectively measuring spontaneous fission neutron signals from {sup 244}Cm. DSNC was designed and manufactured to measure the account of curium in the fuel bundle and associated process samples in the DUPIC fuel cycle. The MCNP code had response profile along the length of the CANDU type fuel bundle. It was found experimentally that the output signal variation due to the overall azimuthal asymmetry was less than 0.2%. The longitudinal detection efficiency distribution at every position including both ends was kept less than 2% from the average value. Spent fuel standards almost similar to DUPIC process material were fabricated from a single spent PWR fuel rod and the performance verification of the DSNC is in progress under very high radiation environment. The results of this test will be eventually benchmarked with other sources such as code simulation, chemical analysis and gamma analysis. COREMAS-DUPIC has been developed for the accountability management of nuclear materials treated by DUPIC facility. This system is able to track the controlled nuclear materials maintaining the material inventory in near-real time and to generate the required material accountability records and reports. Concerning the containment and surveillance technology, a focused R and D effort is given to the development of unattended continuous monitoring system. Currently, the component technologies of radiation monitoring and surveillance have been established, and continued R and D efforts are given to the integration of the components into automatic safeguards diagnostics. (author).

  10. Development of hydrogen storage technologies

    CSIR Research Space (South Africa)

    Langmi, Henrietta W

    2015-10-01

    Full Text Available The use of hydrogen to deliver energy for cars, portable devices and buildings is seen as one of the key steps to reduce greenhouse gas emissions. South Africa’s national hydrogen strategy, HySA, aims to develop and guide innovation along the value...

  11. Developments in Science and Technology

    Science.gov (United States)

    1979-01-01

    dation by Navy Antarctic Development Squadron Sixco im) rtu ;R Rsusn(rgnGaut (VXE-6). Figure 1 shows the polar research aircraft at Center), h rbnadm...perits inu /t sialler quantities of winu- (see Ref. I foi a surs e)). In particular, it found earl) spherit. tracers to be Ietec tedl than isas pretimish

  12. Technology development multidimensional review for engineering and technology managers

    CERN Document Server

    Neshati, Ramin; Watt, Russell; Eastham, James

    2014-01-01

    Developing new products, services, systems, and processes has become an imperative for any firm expecting to thrive in today’s fast-paced and hyper-competitive environment.  This volume integrates academic and practical insights to present fresh perspectives on new product development and innovation, showcasing lessons learned on the technological frontier.  The first part emphasizes decision making.  The second part focuses on technology evaluation, including cost-benefit analysis, material selection, and scenarios. The third part features in-depth case studies to present innovation management tools, such as customer needs identification, technology standardization, and risk management. The fourth part highlights important international trends, such as globalization and outsourcing. Finally the fifth part explores social and political aspects.

  13. Geo energy research and development: technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Traeger, R.K.

    1982-03-01

    Sandia Geo Energy Programs related to geothermal, coal, oil and gas, and synfuel resources have provided a useful mechanism for transferring laboratory technologies to private industry. Significant transfer of hardware, computer programs, diagnostics and instrumentation, advanced materials, and in situ process understanding has occurred through US/DOE supported programs in the past five years. The text briefly reviews the technology transfer procedures and summarizes 32 items that have been transferred and another 20 technologies that are now being considered for possible transfer to industry. A major factor in successful transfer has been personal interactions between Sandia engineers and the technical staff from private industry during all aspects of the technology development.

  14. Space power development impact on technology requirements

    Science.gov (United States)

    Cassidy, J. F.; Fitzgerald, T. J.; Gilje, R. I.; Gordon, J. D.

    1986-01-01

    The paper is concerned with the selection of a specific spacecraft power technology and the identification of technology development to meet system requirements. Requirements which influence the selection of a given technology include the power level required, whether the load is constant or transient in nature, and in the case of transient loads, the time required to recover the power, and overall system safety. Various power technologies, such as solar voltaic power, solar dynamic power, nuclear power systems, and electrochemical energy storage, are briefly described.

  15. Nuclear Technology for the Sustainable Development Goals

    Science.gov (United States)

    Darby, Iain

    2017-01-01

    Science, technology and innovation will play a crucial role in helping countries achieve the ambitious Sustainable Development Goals (SDGs). Since the discovery of nuclear fission in the 1930s, the peaceful applications of nuclear technology have helped many countries improve crops, fight pests, advance health, protect the environment and guarantee a stable supply of energy. Highlighting the goals related to health, hunger, energy and the environment, in this presentation I will discuss how nuclear technology contributes to the SDGs and how nuclear technology can further contribute to the well-being of people, help protect the planet and boost prosperity.

  16. 基于粘滑驱动跨尺度精密定位技术的研究现状%Current Development of Trans-Scale Precision Positioning Technology Based on the Stick-Slip Effect

    Institute of Scientific and Technical Information of China (English)

    钟博文; 王振华; 陈立国; 孙立宁

    2011-01-01

    目前跨尺度纳米定位技术在纳米操作、大规模集成电路制造和生物技术等众多领域都有着广泛的应用前景.该文对目前应用较多的宏微混合式驱动、压电超声马达驱动、尺蠖式驱动和粘滑式驱动这4种跨尺度定位技术驱动原理进行了介绍,并对其分辨率、速度、推力、尺寸、驱动器数量和结构6个方面进行了比较和分析,得出粘滑驱动以其驱动范围大,分辨率高,结构简单,体积小和集成度高等突出优点,适用于微纳操作领域.对目前国内外粘滑驱动在驱动原理、关键技术和样机实验方面的研究进行了分析,总结出目前粘滑驱动研究中的研究基础和不足,并提出了有待解决的问题和关键技术.%The trans-scale precision positioning technology has been already owned broad prospects in many engineering fields such as the nano-manipulation, large-scale IC fabrication and the bio-technics etc. . The operating principles of 4 types of trans-scale precision positioning technologies of the macro-micro hybrid driving, piezoelectric ultrasonic motor driving, inchworm-type driving and slip-stick driving have been summarized in this paper and the resolution, speed, force, size, actuator numbers and structure of these 4 types of driving methods have also been compared and analyzed. The results showed that the slip-stick driving method had the advantages of the large scope movement, high resolution, simple structure, small size and high integration, thus was very suitable for the micro and nano-manipulation applications. The driving principle, key technology research and prototype experiment study of the stick-slip driving method at home and abroad were analyzed. The problems of the stick-slip dnving existed in the current studies and the key technology to be resolved have also been proposed in this paper.

  17. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Hugh W. Rimmer

    2004-05-12

    This Technical Progress Report describes progress made on the seventeen subprojects awarded in the first year of Cooperative Agreement DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. This work is summarized in the body of the main report: the individual sub-project Technical Progress Reports are attached as Appendices. Due to the time taken up by the solicitation/selection process, these cover the initial 6-month period of project activity only. The U.S. is the largest producer of mining products in the world. In 1999, U.S. mining operations produced $66.7 billion worth of raw materials that contributed a total of $533 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium--Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno--that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation (2) Solid-liquid separation (3) Chemical/Biological Extraction (4) Modeling and Control, and (5) Environmental Control.

  18. Ocean Bottom Seismometers technology: current state and future outlook

    Science.gov (United States)

    Ilinskiy, Dmitry; Ganzha, Oleg

    2016-04-01

    The beginning of 2000s was marked by a significant progress in the development and use of self-pop-up sea-bottom seismic recorders (Ocean Bottom Seismometers). In Russia it was a novel solution developed by the Russian Academy of Sciences Experimental Design Bureau of Oceanological Engineering. This recorder and its clones have been widely used not only for the Earth crust studies, but also for investigations of sub-basalt structures and gas hydrate exploration. And what has happened over the last 10 years? Let us look closely at the second generation of ocean bottom stations developed by Geonodal Solutions (GNS) as an illustration of the next step forward in the sea-bottom acquisition technology. First of all, hardware components have changed dramatically. The electronic components became much smaller, accordingly, the power consumption and electronic self-noise were dropped down significantly. This enabled development of compact station 330 mm in diameter instead of previous 450mm. The weight fell by half, while the autonomy increased up to 90 days due to both decreased energy consumption and increased capacity of the batteries. The dynamic range of recorded seismic data has expended as a result of decreased set noise and the application of 24-bit A/D converters. The instruments dimensions have been reduced, power consumption decreased, clock accuracy was significantly improved. At the same time, development of advanced time reference algorithms enabled to retain instrument accuracy around 1 ms during all the autonomous recording period. The high-speed wireless data transfer technology offered a chance to develop "maintenance-free" station throughout its operation time. The station can be re-used at the different sea bottom locations without unsealing of the deep-water container for data download, battery re-charge, clock synchronization. This noticeably reduces the labor efforts of the personnel working with the stations. This is critically important in field

  19. Solar cell materials developing technologies

    CERN Document Server

    Conibeer, Gavin J

    2014-01-01

    This book presents a comparison of solar cell materials, including both new materials based on organics, nanostructures and novel inorganics and developments in more traditional photovoltaic materials. It surveys the materials and materials trends in the field including third generation solar cells (multiple energy level cells, thermal approaches and the modification of the solar spectrum) with an eye firmly on low costs, energy efficiency and the use of abundant non-toxic materials.

  20. Development of Nuclear Analytical Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yong Joon; Kim, J. Y.; Sohn, S. C. (and others)

    2007-06-15

    The pre-treatment and handling techniques for the micro-particles in swipe samples were developed for the safeguards purpose. The development of screening technique for the swipe samples has been established using the nuclear fission track method as well as the alpha track method. The laser ablation system to take a nuclear particle present in swipe was designed and constructed for the determination of the enrichment factors for uranium or plutonium, and its performance was tested in atmosphere as well as in vacuum. The optimum conditions for the synthesis of silica based micro-particles were obtained for mass production. The optimum ion exchange resin was selected and the optimum conditions for the uranium adsorption in resin bead technique were established for the development of the enrichment factor for nuclear particles in swipe. The established technique was applied to the swipe taken directly from the nuclear facility and also to the archive samples of IAEA's environmental swipes. The evaluation of dose rate of neutron and secondary gamma-ray for the radiation shields were carried out to design the NIPS system, as well as the evaluation of the thermal neutron concentration effect by the various reflectors. D-D neutron generator was introduced as a neutron source for the NIPS system to have more advantages such as easier control and moderation capability than the {sup 252}Cf source. Simulated samples for explosive and chemical warfare were prepared to construct a prompt gamma-ray database. Based on the constructed database, a computer program for the detection of illicit chemical and nuclear materials was developed using the MATLAB software.

  1. Nigerian Journal of Technological Development: Editorial Policies

    African Journals Online (AJOL)

    Nigerian Journal of Technological Development: Editorial Policies. Journal Home > About the ... Frequency. This journal published two issues, in one volume per year. ... Dept. of Mechanical Engineering,. Mississipi State University,. USA. Prof.

  2. Readiness for banking technologies in developing countries

    African Journals Online (AJOL)

    banking, internet banking and automated teller machine (ATM) banking to ... businesses in developing countries are building unique ways to market products ... characteristics such as technology readiness, it is therefore important for banks in.

  3. Advances in space technology: the NSBRI Technology Development Team.

    Science.gov (United States)

    Maurer, R H; Charles, H K; Pisacane, V L

    2002-01-01

    As evidenced from Mir and other long-duration space missions, the space environment can cause significant alterations in the human physiology that could prove dangerous for astronauts. The NASA programme to develop countermeasures for these deleterious human health effects is being carried out by the National Space Biomedical Research Institute (NSBRI). The NSBRI has 12 research teams, ten of which are primarily physiology based, one addresses on-board medical care, and the twelfth focuses on technology development in support of the other research teams. This Technology Development (TD) Team initially supported four instrumentation developments: (1) an advanced, multiple projection, dual energy X ray absorptiometry (AMPDXA) scanning system: (2) a portable neutron spectrometer; (3) a miniature time-of-flight mass spectrometer: and (4) a cardiovascular identification system. Technical highlights of the original projects are presented along with an introduction to the five new TD Team projects being funded by the NSBRI.

  4. Advances in space technology: the NSBRI Technology Development Team

    Science.gov (United States)

    Maurer, R. H.; Charles, H. K. Jr; Pisacane, V. L.

    2002-01-01

    As evidenced from Mir and other long-duration space missions, the space environment can cause significant alterations in the human physiology that could prove dangerous for astronauts. The NASA programme to develop countermeasures for these deleterious human health effects is being carried out by the National Space Biomedical Research Institute (NSBRI). The NSBRI has 12 research teams, ten of which are primarily physiology based, one addresses on-board medical care, and the twelfth focuses on technology development in support of the other research teams. This Technology Development (TD) Team initially supported four instrumentation developments: (1) an advanced, multiple projection, dual energy X ray absorptiometry (AMPDXA) scanning system: (2) a portable neutron spectrometer; (3) a miniature time-of-flight mass spectrometer: and (4) a cardiovascular identification system. Technical highlights of the original projects are presented along with an introduction to the five new TD Team projects being funded by the NSBRI.

  5. Immobilized cell technology in beer brewing: Current experience and results

    Directory of Open Access Journals (Sweden)

    Leskošek-Čukalov Ida J.

    2005-01-01

    Full Text Available Immobilized cell technology (ICT has been attracting continual attention in the brewing industry over the past 30 years. Some of the reasons are: faster fermentation rates and increased volumetric productivity, compared to those of traditional beer production based on freely suspended cells, as well as the possibility of continuous operation. Nowadays, ICT technology is well established in secondary fermentation and alcohol- free and low-alcohol beer production. In main fermentation, the situation is more complex and this process is still under scrutiny on both the lab and pilot levels. The paper outlines the most important ICT processes developed for beer brewing and provides an overview of carrier materials, bioreactor design and examples of their industrial applications, as well as some recent results obtained by our research group. We investigated the possible applications of polyvinyl alcohol in the form of LentiKats®, as a potential porous matrices carrier for beer fermentation. Given are the results of growth studies of immobilized brewer's yeast Saccharomyces uvarum and the kinetic parameters obtained by using alginate microbeads with immobilized yeast cells and suspension of yeast cells as controls. The results indicate that the immobilization procedure in LentiKat® carriers has a negligible effect on cell viability and growth. The apparent specific growth rate of cells released in medium was comparable to that of freely suspended cells, implying preserved cell vitality. A series of batch fermentations performed in shaken flasks and an air-lift bioreactor indicated that the immobilized cells retained high fermentation activity. The full attenuation in green beer was reached after 48 hours in shaken flasks and less than 24 hours of fermentation in gas-lift bioreactors.

  6. A Technology Roadmap for Strategic Development of Enhanced Geothermal Systems

    Energy Technology Data Exchange (ETDEWEB)

    Ziagos, John [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Phillips, Benjamin R. [SRA International, Inc. and Geothermal Technologies Office, Washington, DC (United States); Boyd, Lauren [Geothermal Technologies Office, Washington, DC (United States); Jelacic, Allan [SRA International, Inc., Washington, DC (United States); Stillman, Greg [Geothermal Technologies Office, Washington, DC (United States); Hass, Eric [U.S. DOE, Golden, CO (United States)

    2013-02-13

    Realization of EGS development would make geothermal a significant contender in the renewable energy portfolio, on the order of 100+ GWe in the United States alone. While up to 90% of the geothermal power resource in the United States is thought to reside in Enhanced Geothermal Systems (EGS), hurdles to commercial development still remain. The Geothermal Technologies Office, U.S. Department of Energy (DOE), began in 2011 to outline opportunities for advancing EGS technologies on five- to 20-year timescales, with community input on the underlying technology needs that will guide research and ultimately determine commercial success for EGS. This report traces DOE's research investments, past and present, and ties them to these technology needs, forming the basis for an EGS Technology Roadmap to help guide future DOE research. This roadmap is currently open for public comment. Send your comments to geothermal@ee.doe.gov.

  7. Development and Application of Universal Formability Technology

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Using mathematical plasticity theories, universal formability (UF) technology has been developed and applied in the automotive stamping engineering and production. As a formability analysis tool, this technology is the major methodology for the development of stamping expert system (solution provider) for (a) product design and feasibility analysis, (b) material automatic selection using nomograms, (c) draw die design using pre-models, and (d) UF and robustness analysis of die performance in finite element analysis (FEA) environment.

  8. NDE Technology Development Program for Non-Visual Volumetric Inspection Technology; Sensor Effectiveness Testing Report

    Energy Technology Data Exchange (ETDEWEB)

    Moran, Traci L.; Larche, Michael R.; Denslow, Kayte M.; Glass, Samuel W.

    2017-08-31

    The Pacific Northwest National Laboratory (PNNL) located in Richland, Washington, hosted and administered Sensor Effectiveness Testing that allowed four different participants to demonstrate the NDE volumetric inspection technologies that were previously demonstrated during the Technology Screening session. This document provides a Sensor Effectiveness Testing report for the final part of Phase I of a three-phase NDE Technology Development Program designed to identify and mature a system or set of non-visual volumetric NDE technologies for Hanford DST primary liner bottom inspection. Phase I of the program will baseline the performance of current or emerging non-visual volumetric NDE technologies for their ability to detect and characterize primary liner bottom flaws, and identify candidate technologies for adaptation and maturation for Phase II of the program.

  9. Current State of Military Hybrid Vehicle Development

    Science.gov (United States)

    2011-08-31

    Improvement vs. Drive Cycle To further understand the effect of drive cycles, figure 6 shows cycle versus percent fuel economy improvement for series...delivered in any form to and from any load. Some examples included charging the soldiers’ batteries or delivering power back into an electrical grid...Paper No. 2001-01-2794, November 2001. [14] J. M. Paschen , C. Johnson, Shared Technology/Shared Cost, the Evaluation of the Allison EP-50 Electric

  10. Technological Development and Software Piracy

    OpenAIRE

    Romeu, Andrés; Martínez Sánchez, Francisco

    2015-01-01

    In this paper, we analyze the differences in piracy rates from one country to another. Like previous papers on the topic, we find that more developed countries have lower incentives for pirating. Unlike previous papers, we find that the piracy rate is positively correlated with the tax burden rate but negatively correlated with the domestic market size and exports over GDP. We also separate the impacts of education and R&D on piracy, and find two effects with opposite signs. Moreover, we find...

  11. NASA Advanced Radiator Technology Development

    Science.gov (United States)

    Koester, J. Kent; Juhasz, Albert J.

    1994-07-01

    A practical implementation of the two-phase working fluid of lithium and NaK has been developed experimentally for pumped loop radiator designs. The benefits of the high heat capacity and low mass of lithium have been integrated with the shutdown capability enabled by the low freezing temperature of NaK by mixing these liquid metals directly. The stable and reliable start up and shutdown of a lithium/NaK pumped loop has been demonstrated through the development of a novel lithium freeze-separation technique within the flowing header ducts. The results of a highly instrumented liquid metal test loop are presented in which both lithium fraction as well as loop gravitational effects were varied over a wide range of values. Diagnostics based on dual electric probes are presented in which the convective behavior of the lithium component is directly measured during loop operation. The uniform distribution of the lithium after a freeze separation is verified by neutron radiography. The operating regime for reliable freeze/thaw flow behavior is described in terms of correlations based on dimensional analysis.

  12. Global Nuclear Energy Partnership Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    David J. Hill

    2007-07-01

    This plan describes the GNEP Technology Demonstration Program (GNEP-TDP). It has been prepared to guide the development of integrated plans and budgets for realizing the domestic portion of the GNEP vision as well as providing the basis for developing international cooperation. Beginning with the GNEP overall goals, it describes the basic technical objectives for each element of the program, summarizes the technology status and identifies the areas of greatest technical risk. On this basis a proposed technology demonstration program is described that can deliver the required information for a Secretarial decision in the summer of 2008 and support construction of facilities.

  13. Survey of Technologies for Web Application Development

    CERN Document Server

    Doyle, Barry

    2008-01-01

    Web-based application developers face a dizzying array of platforms, languages, frameworks and technical artifacts to choose from. We survey, classify, and compare technologies supporting Web application development. The classification is based on (1) foundational technologies; (2)integration with other information sources; and (3) dynamic content generation. We further survey and classify software engineering techniques and tools that have been adopted from traditional programming into Web programming. We conclude that, although the infrastructure problems of the Web have largely been solved, the cacophony of technologies for Web-based applications reflects the lack of a solid model tailored for this domain.

  14. Developing Technological Capabilities in Agro-Industry

    DEFF Research Database (Denmark)

    Whitfield, Lindsay

    2012-01-01

    This article examines the emergence and trajectory of a new agro-industry in Ghana, the pineapple export industry, using the technological capabilities approach. It explains the limited expansion of the industry and its declining competitiveness in the face of new competition by looking at how...... Ghanaian exporters developed technological capabilities initially and the incentives and disincentives to building on those capabilities. The article argues that at the heart of the industry's crisis was an inability to further develop technological capabilities. The crisis had systemic features that have...

  15. Economic evaluations of personalized medicine: existing challenges and current developments

    Directory of Open Access Journals (Sweden)

    Shabaruddin FH

    2015-06-01

    Full Text Available Fatiha H Shabaruddin,1 Nigel D Fleeman,2 Katherine Payne3 1Department of Pharmacy, University of Malaya, Kuala Lumpur, Malaysia; 2Liverpool Reviews and Implementation Group (LRiG, University of Liverpool, Liverpool, UK; 3Institute of Population Health, The University of Manchester, Manchester, UK Abstract: Personalized medicine, with the aim of safely, effectively, and cost-effectively targeting treatment to a prespecified patient population, has always been a long-time goal within health care. It is often argued that personalizing treatment will inevitably improve clinical outcomes for patients and help achieve more effective use of health care resources. Demand is increasing for demonstrable evidence of clinical and cost-effectiveness to support the use of personalized medicine in health care. This paper begins with an overview of the existing challenges in conducting economic evaluations of genetics- and genomics-targeted technologies, as an example of personalized medicine. Our paper illustrates the complexity of the challenges faced by these technologies by highlighting the variations in the issues faced by diagnostic tests for somatic variations, generally referring to genetic variation in a tumor, and germline variations, generally referring to inherited genetic variation in enzymes involved in drug metabolic pathways. These tests are typically aimed at stratifying patient populations into subgroups on the basis of clinical effectiveness (response or safety (avoidance of adverse events. The paper summarizes the data requirements for economic evaluations of genetics and genomics-based technologies while outlining that the main challenges relating to data requirements revolve around the availability and quality of existing data. We conclude by discussing current developments aimed to address the challenges of assessing the cost-effectiveness of genetics and genomics-based technologies, which revolve around two central issues that are

  16. Banking, Technology Workers and Their Career Development.

    Science.gov (United States)

    Armstrong, Lesley; West, Jim

    2001-01-01

    An Australian bank developed a four-stage career development strategy for information technology workers: (1) career coaching sessions with executives; (2) career coaching seminars for line managers and team leaders; (3) staff career planning workshops; and (4) online career development support. The program resulted in increased satisfaction,…

  17. The Public Sphere, Globalization and Technological Development

    OpenAIRE

    Tina Sikka

    2006-01-01

    Tina Sikka examines the emergence and transformation of Habermas's theory of the public sphere, looking at how this concept informs the debates around communication technologies in development. Development (2006) 49, 87–93. doi:10.1057/palgrave.development.1100277

  18. Capitalizing on App Development Tools and Technologies

    Science.gov (United States)

    Luterbach, Kenneth J.; Hubbell, Kenneth R.

    2015-01-01

    Instructional developers and others creating apps must choose from a wide variety of app development tools and technologies. Some app development tools have incorporated visual programming features, which enable some drag and drop coding and contextual programming. While those features help novices begin programming with greater ease, questions…

  19. Measuring currents in submarine canyons: technological and scientific progress in the past 30 years

    Science.gov (United States)

    Xu, J. P.

    2011-01-01

    The development and application of acoustic and optical technologies and of accurate positioning systems in the past 30 years have opened new frontiers in the submarine canyon research communities. This paper reviews several key advancements in both technology and science in the field of currents in submarine canyons since the1979 publication of Currents in Submarine Canyons and Other Sea Valleys by Francis Shepard and colleagues. Precise placements of high-resolution, high-frequency instruments have not only allowed researchers to collect new data that are essential for advancing and generalizing theories governing the canyon currents, but have also revealed new natural phenomena that challenge the understandings of the theorists and experimenters in their predictions of submarine canyon flow fields. Baroclinic motions at tidal frequencies, found to be intensified both up canyon and toward the canyon floor, dominate the flow field and control the sediment transport processes in submarine canyons. Turbidity currents are found to frequently occur in active submarine canyons such as Monterey Canyon. These turbidity currents have maximum speeds of nearly 200 cm/s, much smaller than the speeds of turbidity currents in geological time, but still very destructive. In addition to traditional Eulerian measurements, Lagrangian flow data are essential in quantifying water and sediment transport in submarine canyons. A concerted experiment with multiple monitoring stations along the canyon axis and on nearby shelves is required to characterize the storm-trigger mechanism for turbidity currents.

  20. The current state of industry development in Ukraine: advance perspective

    Directory of Open Access Journals (Sweden)

    Skyba Maryna Valeriyivna

    2015-02-01

    Full Text Available The current state of the industry of Ukraine are considered at the article. The author determined that the stabilization of the situation and further development of the industry need first of all cessation of hostilities. It is necessary to implement effective measures to combat corruption, the development of consistent, constructive and concerted action on the formation of institutions guaranteeing stability, predictability and transparency of the market rules and procedures that minimize the impact of shadow factors, and implementation of professional privatization and limitation of monopoly at the markets, forming a transparent, competitive business environment, the introduction of new energy saving technologies. These measures will help attract investment, increase production and improve enterprise profitability.

  1. Engineering Research, Development and Technology, FY95: Thrust area report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through their collaboration with US industry in pursuit of the most cost-effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where they can establish unique competencies, and (2) conduct high-quality research and development to enhance their capabilities and establish themselves as the world leaders in these technologies. To focus Engineering`s efforts, technology thrust areas are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1995. The report provides timely summaries of objectives methods, and key results from eight thrust areas: computational electronics and electromagnetics; computational mechanics; microtechnology; manufacturing technology; materials science and engineering; power conversion technologies; nondestructive evaluation; and information engineering.

  2. 3D激光扫描技术与BIM集成应用现状与发展趋势%Current Status and Development Trend of 3D Laser Scanning Technology and BIM Integration

    Institute of Scientific and Technical Information of China (English)

    张俊; 张宇贝; 李伟勤

    2016-01-01

    BIM applications in the process from the design stage to the construction stage, there will be "information attenuation"phenomenon. 3D laser scanning technology integration with BIM can be used to make up for this deficiency, through practical case analysis of the integration of the two applications, summarize the problems in the application and development trend: 3D laser scanning products to reduce costs, shorten the data processing cycle, to improve scanning accuracy development, application development and application to integrate with other technologies. Finally proposed to clear the market demand, hot as the leading, comprehensive advisory services and necessary technical support for the principle of promotion.%BIM应用从设计阶段转向施工阶段的过程中,会出现“信息衰减”的现象,而3D激光扫描技术与BIM的集成能较好的弥补这一不足。通过实际案例对二者的应用现状及集成的应用现状的分析,分析二者集成应用在项目管理过程中存在的问题,并提出发展趋势:制定统一的数据格式标准、基于BIM技术的三维扫描激光扫描与云计算的集成、数据采集向更加精确化发展、减少内业数据处理周期,以满足实际项目的需要,提高BIM信息在施工阶段的应用率。

  3. Carbohydrate drugs: current status and development prospect.

    Science.gov (United States)

    Zhang, Yan; Wang, Fengshan

    2015-04-01

    In recent years, there has been a great effort devoted to the investigation of the roles of carbohydrates in various essential biological processes and the development of carbohydrates to therapeutic drugs. This review summarizes the carbohydrate drugs which have been recorded in several pharmacopoeias, marketed, and under development. A prospect of the future development of carbohydrate drugs is discussed as well.

  4. Application and Current Development of Battery Energy Storage Technology in China and Overseas Countries%国内外电池储能技术的应用及发展现状

    Institute of Scientific and Technical Information of China (English)

    赵书奇; 廖强强; 周国定; 张利中; 刘宇; 支玉清

    2015-01-01

    随着可再生能源的迅猛发展以及对供电可靠性要求的不断提高,电池储能技术在电力系统中的应用日益增多。讨论了铅酸电池、铅炭电池、钠硫电池、全钒液流电池、锂离子电池的性能特点,并介绍了不同电池储能技术在电力系统中的应用。%With the rapid development of renewable energy and the continuous improvement of the power supply reliability, battery energy storage technology has been wildly used in electrical power system. The article discusses about features and characteristics of lead acid battery, lead carbon battery, sodium sulfur battery, all vanadium redox flow battery, lithium ion battery. It also introduces electrical power system applications of different batter energy storage technologies.

  5. Current situation and development of wind power in China

    Institute of Scientific and Technical Information of China (English)

    BAO Nengsheng; NI Weidou

    2007-01-01

    The current development of wind power in China was presented in this paper.Many regions such as Xinjiang Uygur Autonomous Region,Inner Mongolia Autonomous Region and southeast coastal region,etc.in China have abundant wind energy resource.At the same time,the utilization of wind power in China has been developing quickly and its prospect is promising in spite of many some obstacles.With the implementation of the Renewable Energy Law,some previous obstacles have been or are being eliminated.Much investment and many enterprises start to enter this field.In spite of this,there still exist some financial and technological obstacles.One of the technological obstacles is the stability of local power grid owing to the increasing proportion of the wind power capacity.Because the centralized development mode of wind power was adopted,the quick fluctuation of wind speed will influence the voltage and frequency stability of local power grid.In addition,large wind farm has little dispatching ability because of the uncontrollability,randomness and fluctuation of natural incoming wind.To erase these obstacles,a novel hybrid power system combining wind farm and small gas turbine power plants is discussed.

  6. Development of ultrasensitive spectroscopic analysis technology

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Hyung Ki; Song, K. S.; Kim, D. H.; Yang, K. H.; Jung, E. C.; Jeong, D. Y.; Yi, Y. J.; Lee, S. M.; Hong, K. H.; Han, J. M.; Yoo, B. D.; Rho, S. P.; Yi, J. H.; Park, H. M.; Cha, B. H.; Nam, S. M.; Lee, J. M.

    1997-09-01

    For the development of the laser initiated high resolution, ultra sensitive analysis technology following field of researches have been performed. (1) Laser resonance ionization technology, (2) Laser-induced rare isotope detection technology, (3) Laser-induced plasma analysis technology, (4) Microparticle analysis technology by using ion trap, (5) Laser induced remote sensing technique. As a result a monitoring system for photoionized product is developed and the test of system is performed with Sm sample. The rare isotope detection system is designed and a few key elements of the system are developed. In addition a laser-induced plasma analysis system is developed and samples such as Zircaloy, Zinc-base alloy, rock samples are reasonably analyzed. The detection sensitivity is identified as good as a few ppm order. An ion trap is developed and microparticles such as SiC are trapped inside the trap by ac and dc fields. The fluorescence signals from the organic dyes as well as rare earth element which are absorbed on the microparticles are detected. Several calibration curves are also obtained. In the field of laser remote sensing a mobile Lidar system is designed and several key elements are developed. In addition the developed system is used for the detection of Ozone, NO{sub 2}, SO{sub 2}, etc. (author). 57 refs., 42 figs.

  7. Technology Needs for Teachers Web Development and Curriculum Adaptations

    Science.gov (United States)

    Carroll, Christy J.

    1999-01-01

    Computer-based mathematics and science curricula focusing on NASA inventions and technologies will enhance current teacher knowledge and skills. Materials and interactive software developed by educators will allow students to integrate their various courses, to work cooperatively, and to collaborate with both NASA scientists and students at other locations by using computer networks, email and the World Wide Web.

  8. Engineering research, development and technology. Thrust area report, FY93

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report.

  9. Superconducting technology for overcurrent limiting in a 25 kA current injection system

    Science.gov (United States)

    Heydari, Hossein; Faghihi, Faramarz; Sharifi, Reza; Poursoltanmohammadi, Amir Hossein

    2008-09-01

    Current injection transformer (CIT) systems are within the major group of the standard type test of high current equipment in the electrical industry, so their performance becomes very important. When designing high current systems, there are many factors to be considered from which their overcurrent protection must be ensured. The output of a CIT is wholly dependent on the impedance of the equipment under test (EUT). Therefore current flow beyond the allowable limit can occur. The present state of the art provides an important guide to developing current limiters not only for the grid application but also in industrial equipment. This paper reports the state of the art in the technology available that could be developed into an application of superconductivity for high current equipment (CIT) protection with no test disruption. This will result in a greater market choice and lower costs for equipment protection solutions, reduced costs and improved system reliability. The paper will also push the state of the art by using two distinctive circuits, closed-core and open-core, for overcurrent protection of a 25 kA CIT system, based on a flux-lock-type superconducting fault current limiter (SFCL) and magnetic properties of high temperature superconducting (HTS) elements. An appropriate location of the HTS element will enhance the rate of limitation with the help of the magnetic field generated by the CIT output busbars. The calculation of the HTS parameters for overcurrent limiting is also performed to suit the required current levels of the CIT.

  10. Current state of OLED technology relative to military avionics requirements

    Science.gov (United States)

    Tchon, Joseph L.; Barnidge, Tracy J.; Hufnagel, Bruce D.; Bahadur, Birendra

    2014-06-01

    The paper will review optical and environmental performance thresholds required for OLED technology to be used on various military platforms. Life study results will be summarized to highlight trends while identifying remaining performance gaps to make this technology viable for future military avionics platforms.

  11. Progress of MCT Detector Technology at AIM Towards Smaller Pitch and Lower Dark Current

    Science.gov (United States)

    Eich, D.; Schirmacher, W.; Hanna, S.; Mahlein, K. M.; Fries, P.; Figgemeier, H.

    2017-09-01

    We present our latest results on cooled p-on- n planar mercury cadmium telluride (MCT) photodiode technology. Along with a reduction in dark current for raising the operating temperature ( T op), AIM INFRAROT-MODULE GmbH (AIM) has devoted its development efforts to shrinking the pixel size. Both are essential requirements to meet the market demands for reduced size, weight and power and high-operating temperature applications. Detectors based on the p-on- n technology developed at AIM now span the spectrum from the mid-wavelength infrared (MWIR) to the very long wavelength infrared (VLWIR) with cut-off wavelengths from 5 μm to about 13.5 μm at 80 K. The development of the p-on- n technology for VLWIR as well as for MWIR is mainly implemented in a planar photodetector design with a 20- μm pixel pitch. For the VLWIR, dark currents significantly reduced as compared to `Tennant's Rule 07' are demonstrated for operating temperatures between 30 K and 100 K. This allows for the same dark current performance at a 20 K higher operating temperature than with previous AIM technology. For MWIR detectors with a 20- μm pitch, noise equivalent temperature differences of less than 30 mK are obtained up to 170 K. This technology has been transferred to our small pixel pitch high resolution (XGA) MWIR detector with 1024 × 768 pixels at a 10- μm pitch. Excellent performance at an operating temperature of 160 K is demonstrated.

  12. New Strategy for Exploration Technology Development: The Human Exploration and Development of Space (HEDS) Exploration/Commercialization Technology Initiative

    Science.gov (United States)

    Mankins, John C.

    2000-01-01

    In FY 2001, NASA will undertake a new research and technology program supporting the goals of human exploration: the Human Exploration and Development of Space (HEDS) Exploration/Commercialization Technology Initiative (HTCI). The HTCI represents a new strategic approach to exploration technology, in which an emphasis will be placed on identifying and developing technologies for systems and infrastructures that may be common among exploration and commercial development of space objectives. A family of preliminary strategic research and technology (R&T) road maps have been formulated that address "technology for human exploration and development of space (THREADS). These road maps frame and bound the likely content of the HTCL Notional technology themes for the initiative include: (1) space resources development, (2) space utilities and power, (3) habitation and bioastronautics, (4) space assembly, inspection and maintenance, (5) exploration and expeditions, and (6) space transportation. This paper will summarize the results of the THREADS road mapping process and describe the current status and content of the HTCI within that framework. The paper will highlight the space resources development theme within the Initiative and will summarize plans for the coming year.

  13. New Strategy for Exploration Technology Development: The Human Exploration and Development of Space (HEDS) Exploration/Commercialization Technology Initiative

    Science.gov (United States)

    Mankins, John C.

    2000-01-01

    In FY 2001, NASA will undertake a new research and technology program supporting the goals of human exploration: the Human Exploration and Development of Space (HEDS) Exploration/Commercialization Technology Initiative (HTCI). The HTCI represents a new strategic approach to exploration technology, in which an emphasis will be placed on identifying and developing technologies for systems and infrastructures that may be common among exploration and commercial development of space objectives. A family of preliminary strategic research and technology (R&T) road maps have been formulated that address "technology for human exploration and development of space (THREADS). These road maps frame and bound the likely content of the HTCL Notional technology themes for the initiative include: (1) space resources development, (2) space utilities and power, (3) habitation and bioastronautics, (4) space assembly, inspection and maintenance, (5) exploration and expeditions, and (6) space transportation. This paper will summarize the results of the THREADS road mapping process and describe the current status and content of the HTCI within that framework. The paper will highlight the space resources development theme within the Initiative and will summarize plans for the coming year.

  14. Thoughts on the Current Cement Industry Development

    Institute of Scientific and Technical Information of China (English)

    Gan Zhihe

    2003-01-01

    According to the analysis of cement capacity andits relations with macro economy running index, the mainreasons for the present rapid development of cement capacityare the rapid development of economy and the shot up ofwhole society fixed asset investment. According to the presentspeed of economy development, cement still enjoys a po-tential increase, So here has not been an overall excessivepopularity of cement industry. The best way to prevent lowlevel repeated construction is to promote the development ofnew dry- process cement as well as try to get rid of blindness.

  15. Aerosciences, Aero-Propulsion and Flight Mechanics Technology Development for NASA's Next Generation Launch Technology Program

    Science.gov (United States)

    Cockrell, Charles E., Jr.

    2003-01-01

    The Next Generation Launch Technology (NGLT) program, Vehicle Systems Research and Technology (VSR&T) project is pursuing technology advancements in aerothermodynamics, aeropropulsion and flight mechanics to enable development of future reusable launch vehicle (RLV) systems. The current design trade space includes rocket-propelled, hypersonic airbreathing and hybrid systems in two-stage and single-stage configurations. Aerothermodynamics technologies include experimental and computational databases to evaluate stage separation of two-stage vehicles as well as computational and trajectory simulation tools for this problem. Additionally, advancements in high-fidelity computational tools and measurement techniques are being pursued along with the study of flow physics phenomena, such as boundary-layer transition. Aero-propulsion technology development includes scramjet flowpath development and integration, with a current emphasis on hypervelocity (Mach 10 and above) operation, as well as the study of aero-propulsive interactions and the impact on overall vehicle performance. Flight mechanics technology development is focused on advanced guidance, navigation and control (GN&C) algorithms and adaptive flight control systems for both rocket-propelled and airbreathing vehicles.

  16. Extravehicular Activity (EVA) Technology Development Status and Forecast

    Science.gov (United States)

    Chullen, Cinda; Westheimer, David T.

    2010-01-01

    Beginning in Fiscal Year (FY) 2011, Extravehicular activity (EVA) technology development became a technology foundational domain under a new program Enabling Technology Development and Demonstration. The goal of the EVA technology effort is to further develop technologies that will be used to demonstrate a robust EVA system that has application for a variety of future missions including microgravity and surface EVA. Overall the objectives will be reduce system mass, reduce consumables and maintenance, increase EVA hardware robustness and life, increase crew member efficiency and autonomy, and enable rapid vehicle egress and ingress. Over the past several years, NASA realized a tremendous increase in EVA system development as part of the Exploration Technology Development Program and the Constellation Program. The evident demand for efficient and reliable EVA technologies, particularly regenerable technologies was apparent under these former programs and will continue to be needed as future mission opportunities arise. The technological need for EVA in space has been realized over the last several decades by the Gemini, Apollo, Skylab, Space Shuttle, and the International Space Station (ISS) programs. EVAs were critical to the success of these programs. Now with the ISS extension to 2028 in conjunction with a current forecasted need of at least eight EVAs per year, the EVA technology life and limited availability of the EMUs will become a critical issue eventually. The current Extravehicular Mobility Unit (EMU) has vastly served EVA demands by performing critical operations to assemble the ISS and provide repairs of satellites such as the Hubble Space Telescope. However, as the life of ISS and the vision for future mission opportunities are realized, a new EVA systems capability could be an option for the future mission applications building off of the technology development over the last several years. Besides ISS, potential mission applications include EVAs for

  17. HUMID AIR TURBINE CYCLE TECHNOLOGY DEVELOPMENT PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Richard Tuthill

    2002-07-18

    The Humid Air Turbine (HAT) Cycle Technology Development Program focused on obtaining HAT cycle combustor technology that will be the foundation of future products. The work carried out under the auspices of the HAT Program built on the extensive low emissions stationary gas turbine work performed in the past by Pratt & Whitney (P&W). This Program is an integral part of technology base development within the Advanced Turbine Systems Program at the Department of Energy (DOE) and its experiments stretched over 5 years. The goal of the project was to fill in technological data gaps in the development of the HAT cycle and identify a combustor configuration that would efficiently burn high moisture, high-pressure gaseous fuels with low emissions. The major emphasis will be on the development of kinetic data, computer modeling, and evaluations of combustor configurations. The Program commenced during the 4th Quarter of 1996 and closed in the 4th Quarter of 2001. It teamed the National Energy Technology Laboratory (NETL) with P&W, the United Technologies Research Center (UTRC), and a subcontractor on-site at UTRC, kraftWork Systems Inc. The execution of the program started with bench-top experiments that were conducted at UTRC for extending kinetic mechanisms to HAT cycle temperature, pressure, and moisture conditions. The fundamental data generated in the bench-top experiments was incorporated into the analytical tools available at P&W to design the fuel injectors and combustors. The NETL then used the hardware to conduct combustion rig experiments to evaluate the performance of the combustion systems at elevated pressure and temperature conditions representative of the HAT cycle. The results were integrated into systems analysis done by kraftWork to verify that sufficient understanding of the technology had been achieved and that large-scale technological application and demonstration could be undertaken as follow-on activity. An optional program extended the

  18. Advances in Robotic Servicing Technology Development

    Science.gov (United States)

    Gefke, Gardell G.; Janas, Alex; Pellegrino, Joseph; Sammons, Matthew; Reed, Benjamin

    2015-01-01

    NASA's Satellite Servicing Capabilities Office (SSCO) has matured robotic and automation technologies applicable to in-space robotic servicing and robotic exploration over the last six years. This paper presents the progress of technology development activities at the Goddard Space Flight Center Servicing Technology Center and on the ISS, with an emphasis on those occurring in the past year. Highlighted advancements are design reference mission analysis for servicing in low Earth orbit (LEO) and asteroid redirection; delivery of the engineering development unit of the NASA Servicing Arm; an update on International Space Station Robotic Refueling Mission; and status of a comprehensive ground-based space robot technology demonstration expanding in-space robotic servicing capabilities beginning fall 2015.

  19. NON-TECHNOLOGICAL INNOVATION: CURRENT ISSUES AND PERSPECTIVES

    Directory of Open Access Journals (Sweden)

    Cristina Saraiva Pereira

    2013-06-01

    Full Text Available ABSTRACTInnovationcan be considered to be a complex phenomenon including technical andnon-technical aspects. A remarkable increase in the interdisciplinary attention devoted to innovation has been noticed over the recent decades but the formal technological and economic aspects of innovation have received much more attention and have been taken into account in a far greater number of analyses, despite the great importance of the non-technological dimension of innovation.This paper attempts a review on the important subject of non-technological innovation. The main ideas on the non-technological dimension of innovation research will be highlighted, followed by an attempt to integrate diverse and disparate perspectives on the subject, to present evidence on possible generalizations and to discuss eventual research gaps and opportunities for further studies. The relationship between technological and non-technological innovation is complex and not fully understood. Among several aspects that will be covered in this paper, two specific ones will receive special attention in this brief analysis: the evidence on the impacts of non-technological innovation, and the measurements efforts that have been made concerning this phenomenon.

  20. Mobile display technologies: Past developments, present technologies, and future opportunities

    Science.gov (United States)

    Ohshima, Hiroyuki

    2014-01-01

    It has been thirty years since the first active matrix (AM) flat panel display (FPD) was industrialized for portable televisions (TVs) in 1984. The AM FPD has become a dominant electronic display technology widely used from mobile displays to large TVs. The development of AM FPDs for mobile displays has significantly changed our lives by enabling new applications, such as notebook personal computers (PCs), smartphones and tablet PCs. In the future, the role of mobile displays will become even more important, since mobile displays are the live interface for the world of mobile communications in the era of ubiquitous networks. Various developments are being conducted to improve visual performance, reduce power consumption and add new functionality. At the same time, innovative display concepts and novel manufacturing technologies are being investigated to create new values.

  1. CROSSCUTTING TECHNOLOGY DEVELOPMENT AT THE CENTER FOR ADVANCED SEPARATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Christopher E. Hull

    2005-01-20

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/Biological Extraction; (4) Modeling and Control; and (5) Environmental Control.

  2. Heavy Oil Development Technology of Liaohe Oilfield

    Institute of Scientific and Technical Information of China (English)

    Han Yun

    2007-01-01

    @@ Liaohe Oilfield, the largest heavy oil production base in China, features in various reservoir types, deep burial, and wide range of crude oil viscosity. For many years, a series of technologies have been developed for different oil products and reservoir types of the oilfield, of which water flooding, foam slug drive, steam stimulation, steam drive,and SAGD are the main technologies. After continuous improvement, they have been further developed and played an important role in the development of heavy oil in the oilfield.

  3. Transaction Costs, Information Technology and Development

    OpenAIRE

    Singh, Nirvikar

    2004-01-01

    This paper explores potential channels through which information technology (IT) affects economic development. The channel emphasized here is the reduction of transaction costs through the use of information technology. We discuss the nature of transaction costs, their possible impacts on economic outcomes, and the impacts of IT on transaction costs. We provide a theoretical discussion of how a reduction in transaction costs may affect the number of intermediate goods that are produced, and i...

  4. Applying information and communications technologies to collect health data from remote settings: a systematic assessment of current technologies.

    Science.gov (United States)

    Ashar, Raj; Lewis, Sheri; Blazes, David L; Chretien, J P

    2010-04-01

    Modern information and communications technologies (ICTs) are now so feature-rich and widely available that they can be used to "capture," or collect and transmit, health data from remote settings. Electronic data capture can reduce the time necessary to notify public health authorities, and provide important baseline information. A number of electronic health data capture systems based on specific ICTs have been developed for remote areas. We expand on that body of work by defining and applying an assessment process to characterize ICTs for remote-area health data capture. The process is based on technical criteria, and assesses the feasibility and effectiveness of specific technologies according to the resources and constraints of a given setting. Our characterization of current ICTs compares different system architectures for remote-area health data capture systems. Ultimately, we believe that our criteria-based assessment process will remain useful for characterizing future ICTs.

  5. [Advances in low impact development technology for urban stormwater management].

    Science.gov (United States)

    Liu, Wen; Chen, Wei-ping; Peng, Chi

    2015-06-01

    Low impact development ( LID), as an innovative technology for stormwater management, is effective to mitigate urban flooding and to detain pollutants. This paper systemically introduced the LID technology system, and summarized the reduction effects of three typical LID facilities (i.e. , bio-retention, green roof and permeable pavement) on stormwater runoff and main pollutants in recent literature, as well as research outcomes and experiences of LID technology on model simulation, cost-benefit analysis and management system. On this basis, we analyzed the problems and limitations of current LID technology studies. Finally, some suggestions about future research directions, appropriate design and scientific management were put forth. This work intended to provide scientific basis and suggestions for widespread use and standard setting of LID technology in China by referencing overseas studies.

  6. AFCI Safeguards Enhancement Study: Technology Development Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Leon E.; Dougan, A.; Tobin, Stephen; Cipiti, B.; Ehinger, Michael H.; Bakel, A. J.; Bean, Robert; Grate, Jay W.; Santi, P.; Bryan, Steven; Kinlaw, M. T.; Schwantes, Jon M.; Burr, Tom; Lehn, Scott A.; Tolk, K.; Chichester, David; Menlove, H.; Vo, D.; Duckworth, Douglas C.; Merkle, P.; Wang, T. F.; Duran, F.; Nakae, L.; Warren, Glen A.; Friedrich, S.; Rabin, M.

    2008-12-31

    The Advanced Fuel Cycle Initiative (AFCI) Safeguards Campaign aims to develop safeguards technologies and processes that will significantly reduce the risk of proliferation in the U.S. nuclear fuel cycle of tomorrow. The Safeguards Enhancement Study was chartered with identifying promising research and development (R&D) directions over timescales both near-term and long-term, and under safeguards oversight both domestic and international. This technology development roadmap documents recognized gaps and needs in the safeguarding of nuclear fuel cycles, and outlines corresponding performance targets for each of those needs. Drawing on the collective expertise of technologists and user-representatives, a list of over 30 technologies that have the potential to meet those needs was developed, along with brief summaries of each candidate technology. Each summary describes the potential impact of that technology, key research questions to be addressed, and prospective development milestones that could lead to a definitive viability or performance assessment. Important programmatic linkages between U.S. agencies and offices are also described, reflecting the emergence of several safeguards R&D programs in the U.S. and the reinvigoration of nuclear fuel cycles across the globe.

  7. Development of technologies for utilizing geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    In verifying the effectiveness of the deep geothermal resource exploration technology, development is being carried out on a fracture-type reservoir exploration method. The seismic exploration method investigates detailed structures of underground fracture systems by using seismic waves generated on the ground surface. Verification experiments for fiscal 1994 were carried out by selecting the Kakkonda area in which small fracture networks form reservoir beds. Geothermal resources in deep sections (deeper than 2000 m with temperatures higher than 350{degree}C) are promising in terms of amount of the resources, but anticipated with difficulty in exploration and impediments in drilling. To avoid these risks, studies are being progressed on the availability of resources in deep sections, their utilization possibility, and technologies of effective exploration and drilling. This paper summarizes the results of deep resource investigations during fiscal 1994. It also describes such technological development as hot water utilizing power generation. Development is performed on a binary cycle power generation plant which pumps and utilizes hot water of 150 to 200{degree}C by using a downhole pump. The paper also reports development on element technologies for hot rock power generation systems. It also dwells on development of safe and effective drilling and production technologies for deep geothermal resources.

  8. Silicon and Plants: Current Knowledge and Technological Perspectives

    Science.gov (United States)

    Luyckx, Marie; Hausman, Jean-Francois; Lutts, Stanley; Guerriero, Gea

    2017-01-01

    Elemental silicon (Si), after oxygen, is the second most abundant element in the earth’s crust, which is mainly composed of silicates. Si is not considered essential for plant growth and development, however, increasing evidence in the literature shows that this metalloid is beneficial to plants, especially under stress conditions. Indeed Si alleviates the toxic effects caused by abiotic stresses, e.g., salt stress, drought, heavy metals, to name a few. Biogenic silica is also a deterrent against herbivores. Additionally, Si ameliorates the vigor of plants and improves their resistance to exogenous stresses. The protective role of Si was initially attributed to a physical barrier fortifying the cell wall (e.g., against fungal hyphae penetration), however, several studies have shown that the action of this element on plants is far more complex, as it involves a cross-talk with the cell interior and an effect on plant metabolism. In this study the beneficial role of Si on plants will be discussed, by reviewing the available data in the literature. Emphasis will be given to the protective role of Si during (a)biotic stresses and in this context both priming and the effects of Si on endogenous phytohormones will be discussed. A whole section will be devoted to the use of silica (SiO2) nanoparticles, in the light of the interest that nanotechnology has for agriculture. The paper also discusses the potential technological aspects linked to the use of Si in agriculture and to modify/improve the physical parameters of plant fibers. The study indeed provides perspectives on the use of Si to increase the yield of fiber crops and to improve the thermal stability and tensile strength of natural fibers.

  9. EVALUATION OF CURRENT SUSTAINABILITY ASSESSMENT OF BIOBASED TECHNOLOGY

    Science.gov (United States)

    Sustainable technology is driven by economic competitiveness, government policies and public pressure. The claim of inherent cleanliness for biotechnology is too simplistic. Each application of biotechnology must be evaluated for suitable characteristics of sustainability. The ...

  10. Current status of fluoride volatility method development

    Energy Technology Data Exchange (ETDEWEB)

    Uhlir, J.; Marecek, M.; Skarohlid, J. [UJV - Nuclear Research Institute, Research Centre Rez, CZ-250 68 Husinec - Rez 130 (Czech Republic)

    2013-07-01

    The Fluoride Volatility Method is based on a separation process, which comes out from the specific property of uranium, neptunium and plutonium to form volatile hexafluorides whereas most of fission products (mainly lanthanides) and higher transplutonium elements (americium, curium) present in irradiated fuel form nonvolatile tri-fluorides. Fluoride Volatility Method itself is based on direct fluorination of the spent fuel, but before the fluorination step, the removal of cladding material and subsequent transformation of the fuel into a powdered form with a suitable grain size have to be done. The fluorination is made with fluorine gas in a flame fluorination reactor, where the volatile fluorides (mostly UF{sub 6}) are separated from the non-volatile ones (trivalent minor actinides and majority of fission products). The subsequent operations necessary for partitioning of volatile fluorides are the condensation and evaporation of volatile fluorides, the thermal decomposition of PuF{sub 6} and the finally distillation and sorption used for the purification of uranium product. The Fluoride Volatility Method is considered to be a promising advanced pyrochemical reprocessing technology, which can mainly be used for the reprocessing of oxide spent fuels coming from future GEN IV fast reactors.

  11. Computational structures technology at Grumman: Current practice/future needs

    Science.gov (United States)

    Pifko, Allan B.; Eidinoff, Harvey

    1992-05-01

    The current practice for the design analysis of new airframe structural systems is to construct a master finite element model of the vehicle in order to develop internal load distributions. The inputs to this model include the geometry which is taken directly from CADAM and CATIA structural layout and aerodynamic loads and mass distribution computer models. This master model is sufficiently detailed to define major load paths and for the computation of dynamic mode shapes and structural frequencies, but not detailed enough to define local stress gradients and notch stresses. This master model is then used to perform structural optimization studies that will provide minimum weights for major structural members. The post-processed output from the master model, load, stress, and strain analysis is then used by structural analysts to perform detailed stress analysis of local regions in order to design local structure with all its required details. This local analysis consists of hand stress analysis and life prediction analysis with the assistance of manuals, design charts, computer stress and structural life analysis and sometimes finite element or boundary element analysis. The resulting design is verified by fatigue tests.

  12. Computed tomography: acquisition process, technology and current state

    Directory of Open Access Journals (Sweden)

    Óscar Javier Espitia Mendoza

    2016-02-01

    Full Text Available Computed tomography is a noninvasive scan technique widely applied in areas such as medicine, industry, and geology. This technique allows the three-dimensional reconstruction of the internal structure of an object which is lighted with an X-rays source. The reconstruction is formed with two-dimensional cross-sectional images of the object. Each cross-sectional is obtained from measurements of physical phenomena, such as attenuation, dispersion, and diffraction of X-rays, as result of their interaction with the object. In general, measurements acquisition is performed with methods based on any of these phenomena and according to various architectures classified in generations. Furthermore, in response to the need to simulate acquisition systems for CT, software dedicated to this task has been developed. The objective of this research is to determine the current state of CT techniques, for this, a review of methods, different architectures used for the acquisition and some of its applications is presented. Additionally, results of simulations are presented. The main contributions of this work are the detailed description of acquisition methods and the presentation of the possible trends of the technique.

  13. Development of high temperature superconductors having high critical current density

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Gye Wong; Kim, C. J.; Lee, H.G.; Kwon, S. C.; Lee, H. J.; Kim, K. B.; Park, J. Y.; Jung, C. H

    2000-08-01

    Fabrication of high T{sub c} superconductors and its applications for electric power device were carried out for developing superconductor application technologies. High quality YBCO superconductors was fabricated by melt texture growth, top-seeded melt growth process and multi-seeded melt growth process and the properties was compared. The critical current density of the melt processed YBCO superconductors was about few 10,000 A/cm{sup 2} and the levitation force was 50 N. The processing time needed for the growth of the 123 single grain was greatly reduced by applying multi-seeding without no significant degradation of the levitation force. The multi-seeded melt growth process was confirmed as a time-saving and cost-effective method for the fabrication of bulk superconductors with controlled crystallographic orientation.

  14. Development of high current beam ns pulsed system

    CERN Document Server

    Shen Guan Ren; Gao Fu; Guan Xia Ling; LiuNaiYi

    2001-01-01

    The development of high current beam ns pulsed system of CPNG and its characteristic, main technological performance and application are introduced. Firstly, important parameters of the system are calculated using theoretical model, the design requirements of some important parts are understood. Some mistakes in physics conception are corrected. Second, the chopper is designed for parallel plate deflector, chopping aperture and sine wave voltage sweeping device. It is emphasized that the conception of parallel plate load impedance is the capacitance load, but not the 50 ohm load impedance. The dynamic capacitance value has been measured. The output emphasizes the output voltage amplitude, but not the output power for sweeping device. The display system of output sweeping voltage was set up and it is sure that the maximum output voltage(V-V) is >=4000 V. The klystron buncher are re-designed. It is emphasized to overcome difficulty of support high voltage electrode in the klystron and insulator of input sine wa...

  15. Crosscutting Technology Development at the Center for Advanced Separation Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Hull

    2009-10-31

    The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.

  16. A geomagnetically induced current warning system: model development and validation

    Science.gov (United States)

    McKay, A.; Clarke, E.; Reay, S.; Thomson, A.

    Geomagnetically Induced Currents (GIC), which can flow in technological systems at the Earth's surface, are a consequence of magnetic storms and Space Weather. A well-documented practical problem for the power transmission industry is that GIC can affect the lifetime and performance of transformers within the power grid. Operational mitigation is widely considered to be one of the best strategies to manage the Space Weather and GIC risk. Therefore in the UK a magnetic storm warning and GIC monitoring and analysis programme has been under development by the British Geological Survey and Scottish Power plc (the power grid operator for Central Scotland) since 1999. Under the auspices of the European Space Agency's service development activities BGS is developing the capability to meet two key user needs that have been identified. These needs are, firstly, the development of a near real-time solar wind shock/ geomagnetic storm warning, based on L1 solar wind data and, secondly, the development of an integrated surface geo-electric field and power grid network model that should allow prediction of GIC throughout the power grid in near real time. While the final goal is a `seamless package', the components of the package utilise diverse scientific techniques. We review progress to date with particular regard to the validation of the individual components of the package. The Scottish power grid response to the October 2003 magnetic storms is also discussed and model and validation data are presented.

  17. Current developments in silicene and germanene

    KAUST Repository

    Kaloni, T. P.

    2016-01-18

    Exploration of the unusual properties of the two-dimensional materials silicene and germanene is a very active research field in recent years. This paper therefore reviews the latest developments, focusing both on the fundamental materials properties and on possible applications. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Energy-conserving development regulations: current practice

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-01

    Almost every aspect of land development has an effect on energy use, from minute architectural details to broad considerations of urban density. Energy-efficiency depends in part on how development is planned and carried out. Conventional development regulations, such as zoning ordinances and subdivision regulations, can be adapted in many ways to promote energy conservation at the community level. This report is about energy-efficient site and neighborhood design. It examines recent experiences of local governments that have adopted new development regulations or amended existing ones to promote energy conservation, more efficient generation and distribution, or a switch to alternative, renewable sources. Although much has been written in recent years about saving energy through community design, actual experience in applying these new ideas is still limited. To date, most communities have focused their efforts on studying the problem, documenting consumption patterns, and writing reports and plans. Only a handful have amended their land-use controls for the express purpose of saving energy. This study identifies 13 of these pioneering communities, after undertaking a survey of over 1400 local, regional, and state planning agencies. It takes a look at their experiences, to learn what has been done, how well it has worked, and what problems have been encountered.

  19. Current Situations and Countermeasures of Development of Kiwifruit Industry in Guizhou Province

    Institute of Scientific and Technical Information of China (English)

    HUANG Wei; WAN Ming-chang; YANG Sheng-jun; ZHANG Xue; QIAO Rong

    2012-01-01

    On the basis of current development situations of planting, scientific research and processing of kiwifruit industry in Guizhou Province, the paper analyzes main factors restricting development of kiwifruit industry, including lack of unified planning, standardized planting specifications, and backward management of kiwifruit orchard. In accordance with current development situations and restricting factors, the paper presents some countermeasures for development of kiwifruit industry in Guizhou Province, including scientific planning, optimizing variety structure, management of cultivation technology, training of kiwifruit farmers, as well as marketing.

  20. Development of advanced neutron beam technology

    Energy Technology Data Exchange (ETDEWEB)

    Seong, B. S.; Lee, J. S.; Sim, C. M. (and others)

    2007-06-15

    The purpose of this work is to timely support the national science and technology policy through development of the advanced application techniques for neutron spectrometers, built in the previous project, in order to improve the neutron spectrometer techniques up to the world-class level in both quantity and quality and to reinforce industrial competitiveness. The importance of the research and development (R and D) is as follows: 1. Technological aspects - Development of a high value-added technology through performing the advanced R and D in the broad research areas from basic to applied science and from hard to soft condensed matter using neutron scattering technique. - Achievement of an important role in development of the new technology for the following industries aerospace, defense industry, atomic energy, hydrogen fuel cell etc. by the non-destructive inspection and analysis using neutron radiography. - Development of a system supporting the academic-industry users for the HANARO facility 2. Economical and Industrial Aspects - Essential technology in the industrial application of neutron spectrometer, in the basic and applied research of the diverse materials sciences, and in NT, BT, and IT areas - Broad impact on the economics and the domestic and international collaborative research by using the neutron instruments in the mega-scale research facility, HANARO, that is a unique source of neutron in Korea. 3. Social Aspects - Creating the scientific knowledge and contributing to the advanced industrial society through the neutron beam application - Improving quality of life and building a national consensus on the application of nuclear power by developing the RT fusion technology using the HANARO facility. - Widening the national research area and strengthening the national R and D capability by performing advanced R and D using the HANARO facility.

  1. Flourishing Technology Development for China's Petroleum Industry

    Institute of Scientific and Technical Information of China (English)

    Fu Chengde; Liu Bingyi

    1994-01-01

    @@ Glimpse of Science andTechnology With over 40 years of development history, a rather complete package system for petroleum research and development has formed. The system includes geological study, oil and gas exploration as well as petroleum machinery etc. There are 262research institutions in CNPC at three different levels (CNPCheadquarters, oilfields headquarters and subsidiaries of oilfields). About 42 021 personnel are directly involved in research and development.

  2. Incorporating Geospatial Technology into Teacher Professional Development

    Science.gov (United States)

    Sproles, E. A.; Songer, L.

    2009-12-01

    The need for students to think spatially and use geospatial technologies is becoming more critical as these tools and concepts are increasingly incorporated into a broad range of occupations and academic disciplines. Geospatial Teaching Across the Curriculum (Geo-STAC) is a collaborative program that provides high school teachers with mentored professional development workshops in geospatial thought and technology. The seminars, led by community college faculty, give high school teachers the ability to incorporate geospatial technology into coursework across the curriculum — in Science, Technology, Engineering, and Math (STEM) and non-STEM disciplines. Students participating in the hands-on lessons gain experience in web-based and desktop Geographic Information Systems (GIS). The goals of the workshop are for teachers to: (1) understand the importance of geospatial thinking; (2) learn how to employ geospatial thinking in each discipline; (3) learn about geospatial technologies; (4) develop a Web-based GIS lesson; and, (5) implement a Web-based GIS lesson. Additionally, Geo-STAC works with high school students so that they: (1) understand the importance of geospatial technologies and careers in future job markets; (2) learn how to use Web-based GIS to solve problems; and, (3) visit the community college GIS lab and experience using desktop GIS. Geo-STAC actively disseminates this collaborative model to colleges to community colleges and high schools across the country.

  3. [Development and current status of perforator flaps].

    Science.gov (United States)

    Xu, Dachuan; Zhang, Shimin; Tang, Maolin; Ouyang, Jun

    2011-09-01

    To provide a comprehensive review for development and existing problems of the perforator flaps. The related home and abroad literature concerning perforator flaps was extensively reviewed. The perforator flaps are defined as the axial flaps nourished solely by small cutaneous perforating vessels (perforating arteries and veins), which are exclusively composed of skin and subcutaneous fat. The perforator flaps have the advantages as follows: less injury at donor site, less damage to the contour of the donor site, good reconstruction and appearance of the recipient site flexible design, and short time of postoperative recovery, which have been widely used in reconstructive surgery. The perforator flaps are the new development of the microsurgery, which usher an era of small axial flaps; However, the controversies of the definition, vascular classification, the nomenclature, and the clinical application of the perforator flaps still exist, which are therefore the hot spot for future study.

  4. Development of the public information and communication technology assessment tool.

    Science.gov (United States)

    Ripat, Jacquie; Watzke, James; Birch, Gary

    2008-09-01

    Public information and communication technologies, such as information kiosks, automated banking machines and ticket dispensers, allow people to access services in a convenient and timely manner. However, the development of these technologies has occurred largely without consideration of access by people with disabilities. Inaccessible technical features make operation of a public technology difficult and barriers in the environment create navigational challenges, limiting the opportunity of people with disabilities to use these devices and access the services they provide. This paper describes the development of a tool that individuals, disability advocacy groups, business owners, healthcare providers, and urban planners can use to evaluate the accessibility of public technologies and the surrounding environment. Evaluation results can then be used to develop recommendations and advocate for technical and environmental changes to improve access. Tool development consisted of a review of the literature and key Canadian Standards Association documents, task analysis, and consultation with accessibility experts. Studies of content validity, tool usability, inter-rater and test-retest reliability were conducted in sites across Canada. Accessibility experts verified the content validity of the tool. The current version of the tool has incorporated the findings of a usability study. Initial testing indicated excellent agreement for inter-rater and test-retest reliability scores. Social exclusion can arise when public technologies are not accessible. This newly developed instrument provides detailed information that can be used to advocate for more accessible and inclusive public information and communication technologies.

  5. Trends in Wind Energy Technology Development

    DEFF Research Database (Denmark)

    Rasmussen, Flemming; Madsen, Peter Hauge; Tande, John O.;

    2011-01-01

    . The huge potential of wind, the rapid development of the technology and the impressive growth of the industry justify the perception that wind energy is changing its role to become the future backbone of a secure global energy supply. Between the mid-1980s, when the wind industry took off, and 2005 wind...... turbine technology has seen rapid development, leading to impressive increases in the size of turbines, with corresponding cost reductions. From 2005 to 2009 the industry’s focus seems to have been on increasing manufacturing capacity, meeting market demand and making wind turbines more reliable...

  6. Development of nuclear equipment qualification technology

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Heon O; Kim, Wu Hyun; Kim, Jin Wuk; Kim, Jeong Hyun; Lee, Jeong Kyu; Kim, Yong Han; Jeong, Hang Keun [Korea Institute of Machinery and Materials, Taejon (Korea)

    1999-03-01

    In order to enhance testing and evaluation technologies, which is one of the main works of the Chanwon branch of KIMM(Korea Institute of Machinery and Materials), in addition to the present work scope of the testing and evaluation in the industrial facilities such as petroleum and chemical, plants, the qualification technologies of the equipments important to safety used in the key industrial facilities such as nuclear power plants should be localized: Equipments for testing and evaluation is to be set up and the related technologies must be developed. In the first year of this study, of vibration aging qualification technologies of equipments important to safety used in nuclear power plants have been performed. (author). 27 refs., 81 figs., 17 tabs.

  7. CURRENT SCENARIO OF HERBAL TECHNOLOGY WORLD WIDE: AN OVERVIEW

    Directory of Open Access Journals (Sweden)

    Parul Agarwal*, Shashi Alok , Amreen Fatima and Amita Verma

    2013-11-01

    Full Text Available This article addresses the basic concepts of herbal technology which is used worldwide. 21st century is the century of Biology mechanical and propelled by scientific knowledge and hi-tech expertise. Herbal technology, are going to be the most influential elements that are fundamental for success and welfare for the people of nations. Information on the herbal technology was collected via electronic search (using pub med, scifinder, Google Scholar and web of science and library search for articles published in peer-reviewed journals. Furthermore, information also was obtained from some local books on ethnopharmacology. Nutraceutical are food or part of the food that grant medical or health benefits together with the prevention or cure of the disease. Cosmaceuticals are the largest accumulation to the health trade and are described as cosmetic products with drug; they are the fastest increased segment in the skin care market. Biopesticides are cost effective, safer, readily available, and ecological and therefore more environment- friendly and will offer substitute to conventional pesticides. Herbal drugs represent a major contribute to all the formally recognized systems of health in India. An upward trend has been experimental in the research on herbals. Export–Import reports reveal that the global trade of herbal technology and plant originated products is around US $250 billion. In the present article, an attempt has been made to present an overview of the herbal technology in the international market and intends to throw in the knowledge about Herbal drugs, Nutraceuticals, Cosmaceuticals, and Biopesticides which comes under herbal technology.

  8. Bacterial otitis media: current vaccine development strategies.

    Science.gov (United States)

    Cripps, Allan W; Kyd, Jennelle

    2003-02-01

    Otitis media is the most common reason for children less than 5 years of age to visit a medical practitioner. Whilst the disease rarely results in death, there is significant associated morbidity. The most common complication is loss of hearing at a critical stage of the development of speech, language and cognitive abilities in children. The cause and pathogenesis of otitis media is multifactorial. Among the contributing factors, the single most important are viral and bacterial infections. Infection with respiratory syncytial virus, influenza viruses, para-influenza viruses, enteroviruses and adenovirus are most commonly associated with acute and chronic otitis media. Streptococcus pneumoniae, non-typeable Haemophilus influenzae and Moraxella catarrhalis are the most commonly isolated bacteria from the middle ears of children with otitis media. Treatment of otitis media has largely relied on the administration of antimicrobials and surgical intervention. However, attention has recently focused on the development of a vaccine. For a vaccine to be effective against bacterial otitis media, it must, at the very least, contain antigens that induce a protective immune response in the middle ear against the three most common infecting bacteria. Whilst over the past decade there has been significant progress in the development of vaccines against invasive S. pneumoniae disease, these vaccines are less efficacious for otitis media. The search for candidate vaccine antigens for non-typeable H. influenzae are well advanced whilst less progress has been made for M. catarrhalis. No human studies have been conducted for non-typeable H. influenzae or M. catarrhalis and the concept of a tribacterial vaccine remains to be tested in animal models. Only when vaccine antigens are determined and an understanding of the immune responses induced in the middle ear by infection and immunization is gained will the formulation of a tribacterial vaccine against otitis media be possible.

  9. [Current status and development of kidney transplantation].

    Science.gov (United States)

    Kirste, G

    1993-01-01

    Since the first successful procedure in 1954 kidney transplantation has become a standard therapy of end stage renal disease. The knowledge of immunoregulation and immune response of the body has enabled people to recognize acute rejection of organs. HLA-testing and organ exchange on basis of HLA-compatibility are extremely important for a successful kidney transplantation. A shortage of organs is limiting the further increase of transplantations. Chronic rejection is in most cases the reason for late graft failure. Further investigations to develop new immunosuppressive drugs and to clarify immunological processes underlying chronic rejections are necessary in the future.

  10. The development strategy of financial and innovative technologies

    Directory of Open Access Journals (Sweden)

    R.V. Lavrov

    2013-09-01

    Full Text Available The aim of the article. The aim of the article is to define and to estimate the forming of expediency of the development strategy of financial and innovative technologies in the context of modern economic space realities.The results of the analysis. The growing importance of the financial sector in the contemporary economic space, as well as rapid changes in it, generates a need for financial innovative technologies. Development strategy of financial and innovative technologies is always associated with the current state of the financial system, its existent technical, technological and financial base. Therefore, the strategy of financial and innovative technologies will be considered the system of long-term goals and means of achieving them, implemented in the financial activity. Financial innovative technologies strategy includes two aspects: 1 management of the introduction of technical and technological innovations; 2the process of constant changes in the financial sector according to the environment change. Thus, theessence of the development strategy of financial innovative technologies is to target business entities (including banks to application new and more efficient technologies, services and organizational structures. In other words, to put the problem of profitability, flexibility and adaptability increasing in the financial market.The development expediency of the financial and innovative technologies is determined by such criteria: concordance with the amount of capital that can be directed to the financial activity; efficiency or concordance of the results and the real costs of achieving them; distinctness in terms of achieving the aim; the optimal combination of expected achievement the necessary profitability and possible risks and uncertainty in the future period; concordance of planned financial technologies with general economic conditions of the environment. Choosing the basic strategy of financial innovative technologies

  11. Current status of biodiesel development in Brazil.

    Science.gov (United States)

    Ramos, Luiz Pereira; Wilhelm, Helena Maria

    2005-01-01

    In recent years, the concept of producing biodiesel from renewable lipid sources has regained international attention. In Brazil, a national program was launched in 2002 to evaluate the technical, economic, and environmental competitiveness of biodiesel in relation to the commercially available diesel oil. Several research projects were initiated nationwide to investigate and/or optimize biodiesel production from renewable lipid sources and ethanol derived from sugarcane (ethyl esters). Once implemented, this program will not only decrease our dependence on petroleum derivatives but also create new market opportunities for agribusiness, opening new jobs in the countryside, improving the sustainability of our energy matrix, and helping the Brazilian government to support important actions against poverty. This article discusses the efforts to develop the Brazilian biodiesel program in the context of technical specifications as well as potential oilseed sources.

  12. Current scenario of drug development for leishmaniasis.

    Science.gov (United States)

    Croft, Simon L; Seifert, Karin; Yardley, Vanessa

    2006-03-01

    Although three new drugs or drug formulations, liposomal amphotericin B (AmBisome), miltefosine and paromomycin should be available for the treatment of visceral leishmaniasis (VL) within the next year, they all suffer from limitations of either cost, specific toxicities or parenteral administration. As part of research to identify better treatments for VL and cutaneous leishmaniasis (CL), alternative and potentially cheaper formulations of amphotericin B, alklyphosphocholines other than miltefosine and improved formulations of paromomycin for CL have been identified. Other drugs or compounds that have demonstrated activity in experimental rodent models of infection include licochalcone derivatives, quinoline derivatives, bisphosphonates and a maesabalide; further chemistry based upon these leads is warranted. The process for discovery and development of new antileishmanials would also benefit from improved models, for example, transfected parasites, and non invasive methods of measuring parasite load in rodent models of infection.

  13. Current development and application of soybean genomics

    Institute of Scientific and Technical Information of China (English)

    Lingli HE; Jing ZHAO; Man ZHAO; Chaoying HE

    2011-01-01

    Soybean (Glycine max),an important domesticated species originated in China,constitutes a major source of edible oils and high-quality plant proteins worldwide.In spite of its complex genome as a consequence of an ancient tetraploidilization,platforms for map-based genomics,sequence-based genomics,comparative genomics and functional genomics have been well developed in the last decade,thus rich repertoires of genomic tools and resources are available,which have been influencing the soybean genetic improvement.Here we mainly review the progresses of soybean (including its wild relative Glycine soja) genomics and its impetus for soybean breeding,and raise the major biological questions needing to be addressed.Genetic maps,physical maps,QTL and EST mapping have been so well achieved that the marker assisted selection and positional cloning in soybean is feasible and even routine.Whole genome sequencing and transcriptomic analyses provide a large collection of molecular markers and predicted genes,which are instrumental to comparative genomics and functional genomics.Comparative genomics has started to reveal the evolution of soybean genome and the molecular basis of soybean domestication process.Microarrays resources,mutagenesis and efficient transformation systems become essential components of soybean functional genomics.Furthermore,phenotypic functional genomics via both forward and reverse genetic approaches has inferred functions of many genes involved in plant and seed development,in response to abiotic stresses,functioning in plant-pathogenic microbe interactions,and controlling the oil and protein content of seed.These achievements have paved the way for generation of transgenic or genetically modified (GM) soybean crops.

  14. CRISPR technologies for bacterial systems: Current achievements and future directions

    DEFF Research Database (Denmark)

    Choi, Kyeong Rok; Lee, Sang Yup

    2016-01-01

    Throughout the decades of its history, the advances in bacteria-based bio-industries have coincided with great leaps in strain engineering technologies. Recently unveiled clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated proteins (Cas) systems are now revolution......Throughout the decades of its history, the advances in bacteria-based bio-industries have coincided with great leaps in strain engineering technologies. Recently unveiled clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated proteins (Cas) systems are now...... revolutionizing biotechnology as well as biology. Diverse technologies have been derived from CRISPR/Cas systems in bacteria, yet the applications unfortunately have not been actively employed in bacteria as extensively as in eukaryotic organisms. A recent trend of engineering less explored strains in industrial...... microbiology-metabolic engineering, synthetic biology, and other related disciplines-is demanding facile yet robust tools, and various CRISPR technologies have potential to cater to the demands. Here, we briefly review the science in CRISPR/Cas systems and the milestone inventions that enabled numerous CRISPR...

  15. Drone Class: Keeping Coursework Current as Technology Advances

    Science.gov (United States)

    Hanssen, Sarah

    2016-01-01

    Today's students prioritize employment; they want to be sure that there will be work for them upon graduation. Film and media students, in particular, need a long list of computer software and film equipment skills on their resumes, especially newer technologies that professionals in the workforce have not yet mastered. Consider, in this regard,…

  16. Drone Class: Keeping Coursework Current as Technology Advances

    Science.gov (United States)

    Hanssen, Sarah

    2016-01-01

    Today's students prioritize employment; they want to be sure that there will be work for them upon graduation. Film and media students, in particular, need a long list of computer software and film equipment skills on their resumes, especially newer technologies that professionals in the workforce have not yet mastered. Consider, in this regard,…

  17. Advanced technology development reducing CO2 emissions

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Sup

    2010-09-15

    Responding to Korean government policies on green growth and global energy/ environmental challenges, SK energy has been developing new technologies to reduce CO2 emissions by 1) CO2 capture and utilization, 2) efficiency improvement, and 3) Li-ion batteries. The paper introduces three advanced technologies developed by SK energy; GreenPol, ACO, and Li-ion battery. Contributing to company vision, a more energy and less CO2, the three technologies are characterized as follows. GreenPol utilizes CO2 as a feedstock for making polymer. Advanced Catalytic Olefin (ACO) reduces CO2 emission by 20% and increase olefin production by 17%. Li-ion Batteries for automotive industries improves CO2 emission.

  18. Technological Creation Fuels Oil Giant's Development

    Institute of Scientific and Technical Information of China (English)

    Mu Zongyan

    2006-01-01

    @@ Sinopec has focused itself on development, conversion and extension of core technologies and specialized technologies in the recent years to fuel its main business development. With the efforts for IPR protection, Sinopec has achieved a series of technological creation results,which lead to huge social and economic benefits. Sinopec has also seen a significant change in the total amount,structure and quality of its assets thanks to those creation results. The sales income of Sinopec, for the first time,topped 800 billion yuan in 2005 with the profits and taxes exceeding 100 billion yuan. With the core competitiveness boosted continually, Sinopec rose to No.31 in the ranking of Fortune Global Top 500.

  19. 我国造纸工业废水深度处理的技术现状及其发展趋势%Current Status and Development Trend of Advanced Treatment Technologies for Waste Water of Paper Industry in China

    Institute of Scientific and Technical Information of China (English)

    翟阳

    2011-01-01

    主要介绍了目前我国造纸工业废水深度处理的混凝、吸附、高级氧化、膜分离与膜生物反应器(MBR)工艺、磁混凝沉淀与磁化-仿酶催化缩合工艺、氧化塘、人工湿地等主要技术的现状,并分析了其发展趋势.%Various waster water advanced treatment technologies currently widely used in China' a paper industry including coagulation, Adsorption, advanced oxidation, membrane technology, magnelization-biomimetic enzyme condensation, oxidation pond and constructed wetland and some examples of their application. The development trend of these technologies were discussed.

  20. Technological Development in Carbon Sequestration at Petrobras

    Energy Technology Data Exchange (ETDEWEB)

    Castello Branco, R.; Vazquez Sebastian, G.; Murce, T.; Cunha, P.; Dino, R.; Sartori Santarosa, C.

    2007-07-01

    Petrobras defined, in its mission, the intention to act in a safe and profitable way, with social and environmental responsibility. In its vision, the company decided to be an oil and energy company, taking into account climate change mitigation. These changes were partially caused, without the company's knowledge, for many years, by the burning of fossil fuels. Among many technologies available for this mitigation, carbon sequestration is the one that, in a short space of time, can avoid the collapse of earth's climate. In order to meet this carbon sequestration challenge, there has been established, at CENPES, three strategies for its technological development: (i) establishment of a Systemic Project for Carbon Sequestration within the scope of the Environmental Technology Program - PROAMB; (ii) creation of a Group of Carbon Sequestration Technologies for Climate Change Mitigation - formation of team and qualification program, which includes the realization of the International Seminar on Carbon Sequestration and Climate Change at Petrobras in October 2006; and (iii) Implementation of the Technological Network of Technologies for Climate Change Mitigation. (auth)

  1. Technology-Enhanced Learning in Developing Nations: A review

    Directory of Open Access Journals (Sweden)

    Shalni Gulati

    2008-02-01

    Full Text Available Learning ‘using’ technologies has become a global phenomenon. The Internet is often seen as a value-neutral tool that potentially allows individuals to overcome the constraints of traditional elitist spaces and gain unhindered access to learning. It is widely suggested that online technologies can help address issues of educational equity and social exclusion, and open up democratic and accessible educational opportunities. The national governments and non-governmental agencies who fund educational endeavours in developing countries have advocated the use of new technologies to reduce the cost of reaching and educating large numbers of children and adults who are currently missing out on education. This paper presents an overview of the educational developments in open, distance, and technology-facilitated learning that aim to reach the educationally deprived populations of the world. It reveals the challenges encountered by children and adults in developing countries as they attempt to access available educational opportunities. The discussion questions whether, in face of these challenges, developing nations should continue to invest money, time, and effort into e-learning developments. Can technology-enhanced learning help address the poverty, literacy, social, and political problems in developing countries?

  2. History of the technological development of air conduction hearing aids.

    Science.gov (United States)

    Mudry, A; Dodelé, L

    2000-06-01

    This was a study of the history of the technological development of air conduction hearing aids, and a review of international literature on the subject. The technological evolution of amplification devices, from their origin to the present day, can be divided into seven distinct periods: the period of sound collectors, the period of hearing devices constructed from carbon, the period of vacuum tubes, the transistor period, the period of integrated circuits, the microprocessor period and the period of digital hearing instruments. Throughout these different stages, hearing instruments have progressively developed reaching their present state. The current era is itself undergoing constant development and change. With the introduction of new technologies, we expect that the rate of change will increase rapidly in the future.

  3. Fundamental Technology Development for Gas-Turbine Engine Health Management

    Science.gov (United States)

    Mercer, Carolyn R.; Simon, Donald L.; Hunter, Gary W.; Arnold, Steven M.; Reveley, Mary S.; Anderson, Lynn M.

    2007-01-01

    Integrated vehicle health management technologies promise to dramatically improve the safety of commercial aircraft by reducing system and component failures as causal and contributing factors in aircraft accidents. To realize this promise, fundamental technology development is needed to produce reliable health management components. These components include diagnostic and prognostic algorithms, physics-based and data-driven lifing and failure models, sensors, and a sensor infrastructure including wireless communications, power scavenging, and electronics. In addition, system assessment methods are needed to effectively prioritize development efforts. Development work is needed throughout the vehicle, but particular challenges are presented by the hot, rotating environment of the propulsion system. This presentation describes current work in the field of health management technologies for propulsion systems for commercial aviation.

  4. Curriculum Development and Alignment in Radiologic Technology.

    Science.gov (United States)

    Dowd, Steven B.

    Before developing a curriculum for radiologic technology, one must first attempt to define the term "curriculum." The term is not easy to define precisely, although it does imply the necessity of a master plan that outlines institutional philosophy and goals, course descriptions, description of competency-based evaluation, performance objectives,…

  5. Developing Pre-service Teachers' Technology Integration ...

    African Journals Online (AJOL)

    Developing Pre-service Teachers' Technology Integration Competencies in Science and Mathematics Teaching: Experiences from Tanzania and Uganda. ... Makerere Journal of Higher Education ... Thus, it emerged that there is a need to explore models situated in a more encompassing theoretical framework like ...

  6. Vaccine development using recombinant DNA technology

    Science.gov (United States)

    Vaccines induce an immune response in the host that subsequently recognizes infectious agents and helps fight off the disease; vaccines must do this without causing the disease. This paper reviews the development of recombinant DNA technologies as a means of providing new ways for attenuating diseas...

  7. Soft-Fault Detection Technologies Developed for Electrical Power Systems

    Science.gov (United States)

    Button, Robert M.

    2004-01-01

    The NASA Glenn Research Center, partner universities, and defense contractors are working to develop intelligent power management and distribution (PMAD) technologies for future spacecraft and launch vehicles. The goals are to provide higher performance (efficiency, transient response, and stability), higher fault tolerance, and higher reliability through the application of digital control and communication technologies. It is also expected that these technologies will eventually reduce the design, development, manufacturing, and integration costs for large, electrical power systems for space vehicles. The main focus of this research has been to incorporate digital control, communications, and intelligent algorithms into power electronic devices such as direct-current to direct-current (dc-dc) converters and protective switchgear. These technologies, in turn, will enable revolutionary changes in the way electrical power systems are designed, developed, configured, and integrated in aerospace vehicles and satellites. Initial successes in integrating modern, digital controllers have proven that transient response performance can be improved using advanced nonlinear control algorithms. One technology being developed includes the detection of "soft faults," those not typically covered by current systems in use today. Soft faults include arcing faults, corona discharge faults, and undetected leakage currents. Using digital control and advanced signal analysis algorithms, we have shown that it is possible to reliably detect arcing faults in high-voltage dc power distribution systems (see the preceding photograph). Another research effort has shown that low-level leakage faults and cable degradation can be detected by analyzing power system parameters over time. This additional fault detection capability will result in higher reliability for long-lived power systems such as reusable launch vehicles and space exploration missions.

  8. Nontyphoidal salmonella disease: Current status of vaccine research and development.

    Science.gov (United States)

    Tennant, Sharon M; MacLennan, Calman A; Simon, Raphael; Martin, Laura B; Khan, M Imran

    2016-06-01

    Among more than 2500 nontyphoidal Salmonella enterica (NTS) serovars, S. enterica serovar Typhimurium and S. enterica serovar Enteritidis account for approximately fifty percent of all human isolates of NTS reported globally. The global incidence of NTS gastroenteritis in 2010 was estimated to be 93 million cases, approximately 80 million of which were contracted via food-borne transmission. It is estimated that 155,000 deaths resulted from NTS in 2010. NTS also causes severe, extra-intestinal, invasive bacteremia, referred to as invasive nontyphoidal Salmonella (iNTS) disease. iNTS disease usually presents as a febrile illness, frequently without gastrointestinal symptoms, in both adults and children. Symptoms of iNTS are similar to malaria, often including fever (>90%) and splenomegaly (>40%). The underlying reasons for the high rates of iNTS disease in Africa are still being elucidated. Evidence from animal and human studies supports the feasibility of developing a safe and effective vaccine against iNTS. Both antibodies and complement can kill Salmonella species in vitro. Proof-of-principle studies in animal models have demonstrated efficacy for live attenuated and subunit vaccines that target the O-antigens, flagellin proteins, and other outer membrane proteins of serovars Typhimurium and Enteritidis. More recently, a novel delivery strategy for NTS vaccines has been developed: the Generalized Modules for Membrane Antigens (GMMA) technology which presents surface polysaccharides and outer membrane proteins in their native conformation. GMMA technology is self-adjuvanting, as it delivers multiple pathogen-associated molecular pattern molecules. GMMA may be particularly relevant for low- and middle-income countries as it has the potential for high immunologic potency at a low cost and involves a relatively simple production process without the need for complex conjugation. Several vaccines for the predominant NTS serovars Typhimurium and Enteritidis, are

  9. Current State of Technology of Fuel Cell Power Systems for Autonomous Underwater Vehicles

    Directory of Open Access Journals (Sweden)

    Alejandro Mendez

    2014-07-01

    Full Text Available Autonomous Underwater Vehicles (AUVs are vehicles that are primarily used to accomplish oceanographic research data collection and auxiliary offshore tasks. At the present time, they are usually powered by lithium-ion secondary batteries, which have insufficient specific energies. In order for this technology to achieve a mature state, increased endurance is required. Fuel cell power systems have been identified as an effective means to achieve this endurance but no implementation in a commercial device has yet been realized. This paper summarizes the current state of development of the technology in this field of research. First, the most adequate type of fuel cell for this application is discussed. The prototypes and design concepts of AUVs powered by fuel cells which have been developed in the last few years are described. Possible commercial and experimental fuel cell stack options are analyzed, examining solutions adopted in the analogous aerial vehicle applications, as well as the underwater ones, to see if integration in an AUV is feasible. Current solutions in oxygen and hydrogen storage systems are overviewed and energy density is objectively compared between battery power systems and fuel cell power systems for AUVs. A couple of system configuration solutions are described including the necessary lithium-ion battery hybrid system. Finally, some closing remarks on the future of this technology are given.

  10. Uplifting developing communities through sustained technology transfer

    CSIR Research Space (South Africa)

    Mashiri, M

    2007-05-01

    Full Text Available feedback mechanisms to both the local Integrated Development Plan and the Provincial Growth and Development Strategy, was able to navigate potential conflict areas such as negotiating acceptable wage rates [below minimum wage] with the community... to mobilize and galvanize the community around the benefits of the project, as well as to explain and to iron out potential mine fields, such as the level of funding available, wage rate and payment policy, technology issues and project implementation...

  11. [Recent development of microfluidic diagnostic technologies].

    Science.gov (United States)

    Li, Haifang; Zhang, Qianyun; Lin, Jin-Ming

    2011-04-01

    Microfluidic devices exhibit a great promising development in clinical diagnosis and disease screening due to their advantages of precise controlling of fluid flow, requirement of miniamount sample, rapid reaction speed and convenient integration. In this paper, the improvements of microfluidic diagnostic technologies in recent years are reviewed. The applications and developments of on-chip disease marker detection, microfluidic cell selection and cell drug metabolism, and diagnostic micro-devices are discussed.

  12. Technological advances in perioperative monitoring: Current concepts and clinical perspectives.

    Science.gov (United States)

    Chilkoti, Geetanjali; Wadhwa, Rachna; Saxena, Ashok Kumar

    2015-01-01

    Minimal mandatory monitoring in the perioperative period recommended by Association of Anesthetists of Great Britain and Ireland and American Society of Anesthesiologists are universally acknowledged and has become an integral part of the anesthesia practice. The technologies in perioperative monitoring have advanced, and the availability and clinical applications have multiplied exponentially. Newer monitoring techniques include depth of anesthesia monitoring, goal-directed fluid therapy, transesophageal echocardiography, advanced neurological monitoring, improved alarm system and technological advancement in objective pain assessment. Various factors that need to be considered with the use of improved monitoring techniques are their validation data, patient outcome, safety profile, cost-effectiveness, awareness of the possible adverse events, knowledge of technical principle and ability of the convenient routine handling. In this review, we will discuss the new monitoring techniques in anesthesia, their advantages, deficiencies, limitations, their comparison to the conventional methods and their effect on patient outcome, if any.

  13. Development of fuel and energy storage technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Development of fuel cell power plants is intended of high-efficiency power generation using such fuels with less air pollution as natural gas, methanol and coal gas. The closest to commercialization is phosphoric acid fuel cells, and the high in efficiency and rich in fuel diversity is molten carbonate fuel cells. The development is intended to cover a wide scope from solid electrolyte fuel cells to solid polymer electrolyte fuel cells. For new battery power storage systems, development is focused on discrete battery energy storage technologies of fixed type and mobile type (such as electric vehicles). The ceramic gas turbine technology development is purposed for improving thermal efficiency and reducing pollutants. Small-scale gas turbines for cogeneration will also be developed. Development of superconduction power application technologies is intended to serve for efficient and stable power supply by dealing with capacity increase and increase in power distribution distance due to increase in power demand. In the operations to improve the spread and general promotion systems for electric vehicles, load leveling is expected by utilizing and storing nighttime electric power. Descriptions are given also on economical city systems which utilize wide-area energy. 30 figs., 7 tabs.

  14. Compact Gamma-ray Source Technology Development Study

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, S G; Gibson, D J; Rusnak, B

    2009-09-25

    This study focuses on the applicability of current accelerator and laser technologies to the construction of compact, narrow bandwidth, gamma-ray sources for DHS missions in illicit materials detection. It also identifies research and development areas in which advancement will directly benefit these light sources. In particular, we review the physics of Compton scattering based light sources and emphasize the source properties most important to Nuclear Resonance Fluorescence (NRF) applications of interest. The influences of laser and electron beam properties on the light source are examined in order to evaluate the utility of different technologies for this application. Applicable bulk and fiber-based laser systems and laser recirculation technologies are discussed and Radio Frequency (RF) Linear Accelerator (linac) technologies are examined to determine the optimal frequency and pulse formats achievable.

  15. Analysis of Electric Vehicle DC High Current Conversion Technology

    Science.gov (United States)

    Yang, Jing; Bai, Jing-fen; Lin, Fan-tao; Lu, Da

    2017-05-01

    Based on the background of electric vehicles, it is elaborated the necessity about electric energy accurate metering of electric vehicle power batteries, and it is analyzed about the charging and discharging characteristics of power batteries. It is needed a DC large current converter to realize accurate calibration of power batteries electric energy metering. Several kinds of measuring methods are analyzed based on shunts and magnetic induction principle in detail. It is put forward power batteries charge and discharge calibration system principle, and it is simulated and analyzed ripple waves containing rate and harmonic waves containing rate of power batteries AC side and DC side. It is put forward suitable DC large current measurement methods of power batteries by comparing different measurement principles and it is looked forward the DC large current measurement techniques.

  16. Survey and analysis of federally developed technology

    Energy Technology Data Exchange (ETDEWEB)

    Reed, J.E.; Conrad, J.L.

    1983-02-01

    The methodology and results of a test effort to determine whether there exist unexpected opportunities for the direct transfer of technologies from federal laboratories to industry are presented. Specifically, the latest results of six federal laboratories with potential application in the pulp and paper industry, particularly those results applicable to improving energy productivity, were evaluated, cataloged, and distributed to industry representatives to gauge their reaction. The principal methodological steps in this effort were the development of a taxonomy of the pulp and paper industry, identification of industry needs and laboratory capabilities, laboratory visits, review of technology findings with industry, and evaluation and compilation of industry responses.

  17. Developments in transgenic technology: applications for medicine.

    Science.gov (United States)

    Hunter, Cheryl V; Tiley, Laurence S; Sang, Helen M

    2005-06-01

    Recent advances in the efficiency of transgenic technology have important implications for medicine. The production of therapeutic proteins from animal bioreactors is well established and the first products are close to market. The genetic modification of pigs to improve their suitability as organ donors for xenotransplantation has been initiated, but many challenges remain. The use of transgenesis, in combination with the method of RNA interference to knock down gene expression, has been proposed as a method for making animals resistant to viral diseases, which could reduce the likelihood of transmission to humans. Here, the latest developments in transgenic technology and their applications relevant to medicine and human health will be discussed.

  18. Survey and analysis of federally developed technology

    Energy Technology Data Exchange (ETDEWEB)

    Reed, J.E.; Conrad, J.L.

    1983-02-01

    The methodology and results of a test effort to determine whether there exist unexpected opportunities for the direct transfer of technologies from federal laboratories to industry are presented. Specifically, the latest results of six federal laboratories with potential application in the pulp and paper industry, particularly those results applicable to improving energy productivity, were evaluated, cataloged, and distributed to industry representatives to gauge their reaction. The principal methodological steps in this effort were the development of a taxonomy of the pulp and paper industry, identification of industry needs and laboratory capabilities, laboratory visits, review of technology findings with industry, and evaluation and compilation of industry responses.

  19. Continuation of Crosscutting Technology Development at Cast

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Roe-Hoan

    2012-03-31

    This Final Technical Report describes progress made on the sub-projects awarded in the Cooperative Agreement DE-FC26-05NT42457: Continuation of Crosscutting Technology Development at Center for Advanced Separation Technologies (CAST). The final reports for each sub-project are attached in the appendix. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: a) Solid-solid separation b) Solid-liquid separation c) Chemical/Biological Extraction d) Modeling and Control, and e) Environmental Control.

  20. Advanced Gas Turbine (AGT) technology development project

    Science.gov (United States)

    1987-01-01

    This report is the final in a series of Technical Summary Reports for the Advanced Gas Turbine (AGT) Technology Development Project, authorizrd under NASA Contract DEN3-167 and sponsored by the DOE. The project was administered by NASA-Lewis Research Center of Cleveland, Ohio. Plans and progress are summarized for the period October 1979 through June 1987. This program aims to provide the US automotive industry the high risk, long range technology necessary to produce gas turbine engines for automobiles that will reduce fuel consumption and reduce environmental impact. The intent is that this technology will reach the marketplace by the 1990s. The Garrett/Ford automotive AGT was designated AGT101. The AGT101 is a 74.5 kW (100 shp) engine, capable of speeds to 100,000 rpm, and operates at turbine inlet temperatures to 1370 C (2500 F) with a specific fuel consumption level of 0.18 kg/kW-hr (0.3 lbs/hp-hr) over most of the operating range. This final report summarizes the powertrain design, power section development and component/ceramic technology development.

  1. Development of safety analysis technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Do Hee; Kwon, Y. M.; Suk, S. D. [and others

    2002-05-01

    In the present study, the KALIMER safety analysis has been made for the transients considered in the design concept, hypothetical core disruptive accident (HCDA), and containment performance with the establishment of the design basis. Such analyses have not been possible without the computer code improvement, and the experience attained during this research period must have greatly contributed to the achievement of the self reliance in the domestic technology establishment on the safety analysis areas of the conceptual design. The safety analysis codes have been improved to extend their applicable ranges for detailed conceptual design, and a basic computer code system has been established for HCDA analysis. A code-to-code comparison analysis has been performed as a part of code verification attempt, and the leading edge technology of JNC also has been brought for the technology upgrade. In addition, the research and development on the area of the database establishment has been made for the efficient and systematic project implementation of the conceptual design, through performances on the development of a project scheduling management, integration of the individually developed technology, establishment of the product database, and so on, taking into account coupling of the activities conducted in each specific area.

  2. TECHNOLOGY DEVELOPMENT ON THE DUPIC SAFEGUARDS SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    H. KIM; H. CHA; ET AL

    2001-02-01

    A safeguards system has been developed since 1993 in the course of supporting a fuel cycle process to fabricate CANDU fuel with spent PWR fuel (known as Direct Use of PWR spent fuel In CANDU, DUPIC). The major safeguards technology involved here was to design and fabricate a neutron coincidence counting system for process accountability, and also an unattended continuous monitoring system in association with independent verification by the IAEA. This combined technology was to produce information of nuclear material content and to maintain knowledge of the continuity of nuclear material flow. In addition to hardware development, diagnosis software is being developed to assist data acquisition, data review, and data evaluation based on a neural network system on the IAEA C/S system.

  3. Is there a technological fix for the current global stagnation?

    DEFF Research Database (Denmark)

    Lundvall, Bengt-Åke

    2016-01-01

    Daniele Archibugi asks whether the 2007–8 financial and economic crisis was brought about by the exhaustion of the current techno-economic paradigm, and whether a new paradigm will lead to eventual recovery. My answer to both questions is ‘No’. Whilst it is useful to think in terms of techno...

  4. Space solar cell technology development - A perspective

    Science.gov (United States)

    Scott-Monck, J.

    1982-01-01

    The developmental history of photovoltaics is examined as a basis for predicting further advances to the year 2000. Transistor technology was the precursor of solar cell development. Terrestrial cells were modified for space through changes in geometry and size, as well as the use of Ag-Ti contacts and manufacture of a p-type base. The violet cell was produced for Comsat, and involved shallow junctions, new contacts, and an enhanced antireflection coating for better radiation tolerance. The driving force was the desire by private companies to reduce cost and weight for commercial satellite power supplies. Liquid phase epitaxial (LPE) GaAs cells are the latest advancement, having a 4 sq cm area and increased efficiency. GaAs cells are expected to be flight ready in the 1980s. Testing is still necessary to verify production techniques and the resistance to electron and photon damage. Research will continue in CVD cell technology, new panel technology, and ultrathin Si cells.

  5. Recent developments in terahertz sensing technology

    Science.gov (United States)

    Shur, Michael

    2016-05-01

    Terahertz technology has found numerous applications for the detection of biological and chemical hazardous agents, medical diagnostics, detection of explosives, providing security in buildings, airports, and other public spaces, shortrange covert communications (in the THz and sub-THz windows), and applications in radio astronomy and space research. The expansion of these applications will depend on the development of efficient electronic terahertz sources and sensitive low-noise terahertz detectors. Schottky diode frequency multipliers have emerged as a viable THz source technology reaching a few THz. High speed three terminal electronic devices (FETs and HBTs) have entered the THz range (with cutoff frequencies and maximum frequencies of operation above 1 THz). A new approach called plasma wave electronics recently demonstrated an efficient terahertz detection in GaAs-based and GaN-based HEMTs and in Si MOS, SOI, FINFETs and in FET arrays. This progress in THz electronic technology has promise for a significant expansion of THz applications.

  6. NASA Astrophysics Prioritizes Technology Development Funding for Strategic Missions

    Science.gov (United States)

    Thronson, Harley A.; Pham, Bruce; Ganel, Opher

    2017-01-01

    The Cosmic Origins (COR) and Physics of the Cosmos (PCOS) Program Offices (POs) reside at NASA GSFC and implement priorities for the NASA HQ Astrophysics Division (APD). One major aspect of the POs’ activities is managing our Strategic Astrophysics Technology (SAT) program to mature technologies for future strategic missions. The Programs follow APD guidance on which missions are strategic, currently informed by the NRC’s 2010 Decadal Survey report, as well as APD’s Implementation Plan and the Astrophysics Roadmap.In preparation for the upcoming 2020 Decadal Survey, the APD has established Science and Technology Definition Teams (STDTs) to study four large-mission concepts: the Origins Space Telescope, Habitable Exoplanet Imaging Mission, Large UV/Optical/IR Surveyor, and X-ray Surveyor. The STDTs will develop the science case and design reference mission, assess technology development needs, and estimate the cost of their concept. A fifth team, the L3 Study Team (L3ST), was charged to study potential US contributions to ESA’s planned L3 gravitational-wave observatory.The POs use a rigorous and transparent process to solicit technology gaps from the scientific and technical communities, and prioritize those entries based on strategic alignment, expected impact, cross-cutting applicability, and urgency. Starting in 2016, the technology-gap assessments of the four STDTs and the L3ST are included in our process. Until a study team submits its final report, community-proposed changes to gaps submitted or adopted by a study team are forwarded to that study team for consideration.We discuss our technology development process, with strategic prioritization informing calls for SAT proposals and informing investment decisions. We also present results of this year’s technology gap prioritization and showcase our current portfolio of technology development projects. To date, 77 COR and 80 PCOS SAT proposals have been received, of which 18 COR and 22 PCOS projects

  7. Advanced ceramic matrix composite materials for current and future propulsion technology applications

    Science.gov (United States)

    Schmidt, S.; Beyer, S.; Knabe, H.; Immich, H.; Meistring, R.; Gessler, A.

    2004-08-01

    Current rocket engines, due to their method of construction, the materials used and the extreme loads to which they are subjected, feature a limited number of load cycles. Various technology programmes in Europe are concerned, besides developing reliable and rugged, low cost, throwaway equipment, with preparing for future reusable propulsion technologies. One of the key roles for realizing reusable engine components is the use of modern and innovative materials. One of the key technologies which concern various engine manufacturers worldwide is the development of fibre-reinforced ceramics—ceramic matrix composites. The advantages for the developers are obvious—the low specific weight, the high specific strength over a large temperature range, and their great damage tolerance compared to monolithic ceramics make this material class extremely interesting as a construction material. Over the past years, the Astrium company (formerly DASA) has, together with various partners, worked intensively on developing components for hypersonic engines and liquid rocket propulsion systems. In the year 2000, various hot-firing tests with subscale (scale 1:5) and full-scale nozzle extensions were conducted. In this year, a further decisive milestone was achieved in the sector of small thrusters, and long-term tests served to demonstrate the extraordinary stability of the C/SiC material. Besides developing and testing radiation-cooled nozzle components and small-thruster combustion chambers, Astrium worked on the preliminary development of actively cooled structures for future reusable propulsion systems. In order to get one step nearer to this objective, the development of a new fibre composite was commenced within the framework of a regionally sponsored programme. The objective here is to create multidirectional (3D) textile structures combined with a cost-effective infiltration process. Besides material and process development, the project also encompasses the development of

  8. NASA GRC Stirling Technology Development Overview

    Science.gov (United States)

    Thieme, Lanny G.; Schreiber, Jeffrey G.

    2003-01-01

    The Department of Energy, Lockheed Martin (LM), Stirling Technology Company, and NASA Glenn Research Center (GRC) are developing a high-efficiency Stirling Radioisotope Generator (SRG) for potential NASA Space Science missions. The SRG is being developed for multimission use, including providing spacecraft onboard electric power for NASA deep space missions and power for unmanned Mars rovers. NASA GRC is conducting an in- house supporting technology project to assist in developing the Stirling convertor for space qualification and mission implementation. Preparations are underway for a thermalhacuum system demonstration and unattended operation during endurance testing of the 55-We Technology Demonstration Convertors. Heater head life assessment efforts continue, including verification of the heater head brazing and heat treatment schedules and evaluation of any potential regenerator oxidation. Long-term magnet aging tests are continuing to characterize any possible aging in the strength or demagnetization resistance of the permanent magnets used in the linear alternator. Testing of the magnet/lamination epoxy bond for performance and lifetime characteristics is now underway. These efforts are expected to provide key inputs as the system integrator, LM, begins system development of the SRG. GRC is also developing advanced technology for Stirling convertors. Cleveland State University (CSU) is progressing toward a multi-dimensional Stirling computational fluid dynamics code, capable of modeling complete convertors. Validation efforts at both CSU and the University of Minnesota are complementing the code development. New efforts have been started this year on a lightweight convertor, advanced controllers, high-temperature materials, and an end-to-end system dynamics model. Performance and mass improvement goals have been established for second- and third-generation Stirling radioisotope power systems.

  9. Status quo and development trend of breast biopsy technology.

    Science.gov (United States)

    Zhang, Yan-Jun; Wei, Lichun; Li, Jie; Zheng, Yi-Qiong; Li, Xi-Ru

    2013-02-01

    Triple assessment is a standard method for assessment of breast diseases, which includes clinical evaluation, radiographic assessment and pathological assessment. Biopsy for breast disease is the gold standard for pathological assessment, including incisional biopsy, excisional biopsy, core needle biopsy, vacuum-assisted biopsy and bite biopsy. With the continuous advancement of diagnostic and treatment technology for breast cancer, collection of diseased tissue has also undergone a gradual transition from traditional open surgery to biopsy. This review summarizes the current situation and development of breast biopsy technology to provide an insight into the latest details such as the safety and reliability as the basis for selection of the most appropriate techniques for specific settings.

  10. Advanced technology's impact on compressor design and development - A perspective

    Science.gov (United States)

    Ball, Calvin L.

    1989-01-01

    A historical perspective of the impact of advanced technologies on compression system design and development for aircraft gas turbine applications is presented. A bright view of the future is projected in which further advancements in compression system technologies will be made. These advancements will have a significant impact on the ability to meet the ever-more-demanding requirements being imposed on the propulsion system for advanced aircraft. Examples are presented of advanced compression system concepts now being studied. The status and potential impact of transitioning from an empirically derived design system to a computationally oriented system are highlighted. A current NASA Lewis Research Center program to enhance this transitioning is described.

  11. Advanced technologies impact on compressor design and development: A perspective

    Science.gov (United States)

    Ball, Calvin L.

    1989-01-01

    A historical perspective of the impact of advanced technologies on compression system design and development for aircraft gas turbine applications is presented. A bright view of the future is projected in which further advancements in compression system technologies will be made. These advancements will have a significant impact on the ability to meet the ever-more-demanding requirements being imposed on the propulsion system for advanced aircraft. Examples are presented of advanced compression system concepts now being studied. The status and potential impact of transitioning from an empirically derived design system to a computationally oriented system are highlighted. A current NASA Lewis Research Center program to enhance this transitioning is described.

  12. 78 FR 17418 - Rural Health Information Technology Network Development Grant

    Science.gov (United States)

    2013-03-21

    ... award under the Rural Health Information Technology Network Development Grant (RHITND) to Grace... relinquishing its fiduciary responsibilities for the Rural Health Information Technology Network Development... HUMAN SERVICES Health Resources and Services Administration Rural Health Information Technology...

  13. Nuclear Power for Sustainable Development : Current Status and Future Prospects

    OpenAIRE

    Adamantiades, A.; Kessides, I.

    2009-01-01

    Interest in nuclear power has been revived as a result of volatile fossil fuel prices, concerns about the security of energy supplies, and global climate change. This paper describes the current status and future plans for expansion of nuclear power, the advances in nuclear reactor technology, and their impacts on the associated risks and performance of nuclear power. Advanced nuclear reactors have been designed to be simpler and safer, and to have lower costs than currently operating reactor...

  14. Technology development for high power induction accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Birx, D.L.; Reginato, L.L.

    1985-06-11

    The marriage of Induction Linac technology with Nonlinear Magnetic Modulators has produced some unique capabilities. It appears possible to produce electron beams with average currents measured in amperes, at gradients exceeding 1 MeV/meter, and with power efficiencies approaching 50%. A 2 MeV, 5 kA electron accelerator has been constructed at the Lawrence Livermore National Laboratory (LLNL) to demonstrate these concepts and to provide a test facility for high brightness sources. The pulse drive for the accelerator is based on state-of-the-art magnetic pulse compressors with very high peak power capability, repetition rates exceeding a kilohertz and excellent reliability.

  15. Thrust Area Report, Engineering Research, Development and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R. T.

    1997-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through our collaboration with U.S. industry in pursuit of the most cost- effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where we can establish unique competencies, and (2) conduct high-quality research and development to enhance our capabilities and establish ourselves as the world leaders in these technologies. To focus Engineering`s efforts technology {ital thrust areas} are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1996. The report provides timely summaries of objectives, methods, and key results from eight thrust areas: Computational Electronics and Electromagnetics; Computational Mechanics; Microtechnology; Manufacturing Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; and Information Engineering. Readers desiring more information are encouraged to contact the individual thrust area leaders or authors. 198 refs., 206 figs., 16 tabs.

  16. Development of the advanced CANDU technology

    Energy Technology Data Exchange (ETDEWEB)

    Suk, Soo Dong; Min, Byung Joo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Na, Y. H.; Lee, S. Y.; Choi, J. H.; Lee, B. C.; Kim, S. N.; Jo, C. H.; Paik, J. S.; On, M. R.; Park, H. S.; Kim, S. R. [Korea Electric Power Co., Taejon (Korea, Republic of)

    1997-07-01

    The purpose of this study is to develop the advanced design technology to improve safety, operability and economy and to develop and advanced safety evaluation system. More realistic and reasonable methodology and modeling was employed to improve safety margin in containment analysis. Various efforts have been made to verify the CATHENA code which is the major safety analysis code for CANDU PHWR system. Fully computerized prototype ECCS was developed. The feasibility study and conceptual design of the distributed digital control system have been performed as well. The core characteristics of advanced fuel cycle, fuel management and power upgrade have been studied to determine the advanced core. (author). 77 refs., 51 tabs., 108 figs.

  17. Design of Current steering DAC using 250nm CMOS Technology

    Directory of Open Access Journals (Sweden)

    Vineet Tiwari

    2012-06-01

    Full Text Available To build a digital to analog converter, that only receives digital signal that can only receives digital signal and produces only analog signal. A converter in which digital input signals are changed to essentially proportional analog signals. Abbreviated DAC a device for converting information in the forms of combination of discrete(usually binary states or signal to information in the form of combinations of discrete(usually binary states or signal to information in the form of value or magnitude of some characteristics of signal, in relation to standard or reference signal. Digital-toanalog (D/A converters (sometimes called DACs are used to present the results of digital computation, storage, or transmission, typically for graphical display or for the control of devices that operate with continuously varying quantities. D/A converter circuits are also used in the design of analog-to-digital converters that employ feedback techniques, such as successive-approximation and counter-comparator types. In such applications, the D/A converter may not necessarily appear as a separately identifiable entity. The fundamental circuit of most D/A converters involves a voltage or current reference; a resistive “ladder network” that derives weighted currents or voltages, usually as discrete fractions of the reference; and a set of switches, operated by the digital input, that determines which currents or voltages will be summed to constitute the output. The output of the D/A converter is proportional to the product of the digital input value and the reference. In many applications, the reference is fixed, and the output bears a fixed proportion to the digital input. In other applications, the reference, as well as the digital input, can vary; a D/A converter that is used in these applications is thus called a multiplying D/A converter. It is principally used for imparting a digitally controlled scale factor, or “gain,” to an analog input signal

  18. Safeguards Technology Factsheet - Unattended Dual Current Monitor (UDCM)

    Energy Technology Data Exchange (ETDEWEB)

    Newell, Matthew R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-04-13

    The UDCM is a low-current measurement device designed to record sub-nano-amp to micro-amp currents from radiation detectors. The UDCM is a two-channel device that incorporates a Commercial-Off-The-Shelf (COTS) processor enabling both serial over USB as well as Ethernet communications. The instrument includes microSD and USB flash memory for data storage as well as a programmable High Voltage (HV) power supply for detector bias. The UDCM is packaged in the same enclosure, employs the same processor and has a similar user interface as the UMSR. A serial over USB communication line to the UDCM allows the use of existing versions of MIC software, while the Ethernet port is compatible with the new IAEA RAINSTORM communication protocol.

  19. Current and future technological trends in positron emission tomography.

    Science.gov (United States)

    Karp, J S; Freifelder, R

    1992-04-01

    Current trends in positron emission tomography (PET) instrumentation are examined, with an emphasis on providing information suitable to the prospective PET user. Basic principles underlying PET are explained and information on performance measurements, techniques, and quantitation are given in order to allow the user to compare and contrast different types of PET scanners. These scanner designs are described. Specific examples are given and the combination of PET with other modalities is discussed.

  20. IMS: a new technology to develop a telemedicine system.

    Science.gov (United States)

    Uceda, J D; Elena, M; Blasco, S; Tarrida, C L; Quero, J M

    2008-01-01

    The emergent IMS (Internet Protocol Multimedia Subsystem) technology appears to improve the current communication technologies. Its characteristics, such as Quality of Service (QoS), make it an advantageous system for innovative applications. Providing integrated services to users is one of the main reasons for the existence of IMS. Operators provide the technology as an open source, to be able to use services developed by researchers. Combining and integrating them, users will receive completely new services. Our proposal of use for IMS is the development of a telemedicine platform, designed to support not only remote biological signal monitoring, but value-added services for diagnosis and medical care, both of these working in real time.

  1. Development of safety analysis technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. B.; Kwon, Y. M.; Suk, S. D. [and others

    2005-03-01

    The MATRA-LMR-FB has been developed internally for the damage prevention as well as the safety assessment during a channel blockage accident and, as a the result, the quality of the code becomes comparable to that developed in the leading countries. For a code-to-code comparison, KAERI could have access to the SASSYS-1 through a bilateral collaboration between KAERI and ANL. The study could bring into the reliability improvements both on the reactivity models in the SSC-K and on the SSC-K prediction capability. It finally leads to the completion of the SSC-K version 1.3 resulting from the qualitative and quantitative code-to-code comparison. The preliminary analysis for a metal fueled LMR could also become possible with the MELT-III and the VENUS-II, which had originally been developed for the HCDA analysis with an oxidized fuel, by developing the relevant models For the development of the safety evaluation technology, the safety limits have been set up, and the analyses of the internal and external channel blockages in an assembly have also been performed. Besides, the more reliable analysis results on the key design concepts could be obtained by way of the methodology improvement resulting from the qualitative and quantitative comparison study. For an efficient and systematic control of the main project, the integration of the developed technologies and the establishment of their data base have been pursued. It has gone through the development of the process control with taking account of interfaces among the sub-projects, the overall coordination of the developed technologies, the data base for the design products, and so on.

  2. 设施园艺半导体照明及其研发中的科技问题%Current Science & Technology Urgent Issues to Be Solved for Research and Development of LED Lighting in Protected Horticulture

    Institute of Scientific and Technical Information of China (English)

    刘文科; 杨其长

    2014-01-01

    为推进设施园艺照明研发及产业化发展,需解决的科学问题包括:(1)光质生物学。弄清单一光质及复合光质对植物和食用菌生长发育和产量品质影响的生理代谢、分子生物学及蛋白组学机理;生物种类及品种间光质适应性和利用差异性机理;光质与环境其它因子互作的生物学机制;设施生物光质数量属性有效阈值和基准值(如补偿点、饱和点与光胁迫阈值)等;(2)逆境光质生物学。明确单色及复合弱光、强光及连续光照下光合机构、代谢系统运转效率的响应机理及其农学意义等。需解决的技术问题包括:(1)建立设施园艺各生产领域特定生物生长发育、优质高产所需的光照配方;(2)制定农业生物光环境控制策略;(3)研发LED光源装置、灯具及计算机智能控制系统。%In order to accelerate the industrialization and scaled application development of LLPH , science issues in LLPH include two aspects .One issue is photobiology , to clarify the responsive mechanisms of physiology, molecular biology and proteomics of plant and edible fungi under monochromatic and compound light;Interspecific and intervarietal variations of light quality utilization for plants and edible fungi;interaction mechanisms between light quality and other environmental factors;available thresholds and critical values of light quality ( i.e.compensation point, saturation point, and stress thresholds ).The other issue is stress photobiology, to clarify the influences of weak lighting , strong lighting and continuous lighting of LED monochromatic or compound light on efficiencies of photosynthetic apparatus and metabolism systems .Three technology issues should be considered , including ( 1 ) optimal light recipes for high productivity; ( 2 ) establishment of light environmental control strategy for various production fields;(3) development of LED light source devices, lamps

  3. Offline Chinese handwriting recognition :an assessment of current technology

    Institute of Scientific and Technical Information of China (English)

    Sargur N.Srihari; Xuanshen Yang; Gregory R.Ball

    2007-01-01

    Offline Chinese handwriting recognition (OCHR)is a typically difficult pattern recognition problem.Many authors have presented various approaches to recognizing its different aspects.We present a survey and an assessment of relevant papers appearing in recent publications of relevant conferences and journals,including those appearing in ICDAR,SDIUT,IWFHR,ICPR,PAMI,PR,PRL,SPIE-DRR,and IJDAR.The methods are assessed in the sense that we document their technical approaches,strengths,and weaknesses,as well as the data sets on which they were reportedly tested and on which results were generated.We also identify a list of technology gaps with respect to Chinese handwriting recognition and identify technical approaches that show promise in these areas as well as identify the leading researchers for the applicable topics,discussing difficulties associated with any given approach.

  4. MicroRNA Detection: Current Technology and Research Strategies

    Science.gov (United States)

    Hunt, Eric A.; Broyles, David; Head, Trajen; Deo, Sapna K.

    2015-07-01

    The relatively new field of microRNA (miR) has experienced rapid growth in methodology associated with its detection and bioanalysis as well as with its role in -omics research, clinical diagnostics, and new therapeutic strategies. The breadth of this area of research and the seemingly exponential increase in number of publications on the subject can present scientists new to the field with a daunting amount of information to evaluate. This review aims to provide a collective overview of miR detection methods by relating conventional, established techniques [such as quantitative reverse transcription polymerase chain reaction (RT-qPCR), microarray, and Northern blotting (NB)] and relatively recent advancements [such as next-generation sequencing (NGS), highly sensitive biosensors, and computational prediction of microRNA/targets] to common miR research strategies. This should guide interested readers toward a more focused study of miR research and the surrounding technology.

  5. Food waste-to-energy conversion technologies: current status and future directions.

    Science.gov (United States)

    Pham, Thi Phuong Thuy; Kaushik, Rajni; Parshetti, Ganesh K; Mahmood, Russell; Balasubramanian, Rajasekhar

    2015-04-01

    Food waste represents a significantly fraction of municipal solid waste. Proper management and recycling of huge volumes of food waste are required to reduce its environmental burdens and to minimize risks to human health. Food waste is indeed an untapped resource with great potential for energy production. Utilization of food waste for energy conversion currently represents a challenge due to various reasons. These include its inherent heterogeneously variable compositions, high moisture contents and low calorific value, which constitute an impediment for the development of robust, large scale, and efficient industrial processes. Although a considerable amount of research has been carried out on the conversion of food waste to renewable energy, there is a lack of comprehensive and systematic reviews of the published literature. The present review synthesizes the current knowledge available in the use of technologies for food-waste-to-energy conversion involving biological (e.g. anaerobic digestion and fermentation), thermal and thermochemical technologies (e.g. incineration, pyrolysis, gasification and hydrothermal oxidation). The competitive advantages of these technologies as well as the challenges associated with them are discussed. In addition, the future directions for more effective utilization of food waste for renewable energy generation are suggested from an interdisciplinary perspective. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. High technology in developing countries: Analysis of technology strategy, technology transfer, and success factors in the aircraft industry

    NARCIS (Netherlands)

    Steenhuis, Harm-Jan; Bruijn, de Erik J.

    2004-01-01

    Economical development is highly related to technological development. It is therefore not surprising that many of the industrially developing nations follow explicit strategies to increase their technological competence level. Industrially developing countries may even pursue a strategy of developi

  7. High technology in developing countries: Analysis of technology strategy, technology transfer, and success factors in the aircraft industry

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2004-01-01

    Economical development is highly related to technological development. It is therefore not surprising that many of the industrially developing nations follow explicit strategies to increase their technological competence level. Industrially developing countries may even pursue a strategy of

  8. Technology Development for High Efficiency Optical Communications

    Science.gov (United States)

    Farr, William H.

    2012-01-01

    Deep space optical communications is a significantly more challenging operational domain than near Earth space optical communications, primarily due to effects resulting from the vastly increased range between transmitter and receiver. The NASA Game Changing Development Program Deep Space Optical Communications Project is developing four key technologies for the implementation of a high efficiency telecommunications system that will enable greater than 10X the data rate of a state-of-the-art deep space RF system (Ka-band) for similar transceiver mass and power burden on the spacecraft. These technologies are a low mass spacecraft disturbance isolation assembly, a flight qualified photon counting detector array, a high efficiency flight laser amplifier and a high efficiency photon counting detector array for the ground-based receiver.

  9. Development of decontamination, decommissioning and environmental restoration technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung Jik; Kwon, H. S.; Kim, G. N. and others

    1999-03-01

    Through the project of 'Development of decontamination, decommissioning and environmental restoration technology', the followings were studied. 1. Development of decontamination and repair technology for nuclear fuel cycle facilities 2. Development of dismantling technology 3. Development of environmental restoration technology. (author)

  10. Reprocessing semicritical items: Current issues and new technologies.

    Science.gov (United States)

    Rutala, William A; Weber, David J

    2016-05-02

    Semicritical medical devices are defined as items that come into contact with mucous membranes or nonintact skin (eg, gastrointestinal endoscopes, endocavitary probes). Such medical devices minimally require high-level disinfection. Because many of these items are temperature sensitive, low-temperature chemical methods are usually used rather than steam sterilization. Strict adherence to current guidelines is required because more outbreaks have been linked to inadequately cleaned or disinfected endoscopes and other semicritical items undergoing high-level disinfection than any other reusable medical device.

  11. Accurate and fast table look-up models for leakage current analysis in 65 nm CMOS technology

    Institute of Scientific and Technical Information of China (English)

    薛冀颖; 李涛; 余志平

    2009-01-01

    Novel physical models for leakage current analysis in 65 nm technology are proposed. Taking into con-sideration the process variations and emerging effects in nano-scaled technology, the presented models are capable of accurately estimating the subthreshold leakage current and junction tunneling leakage current in 65 nm technol-ogy. Based on the physical models, new table look-up models are developed and first applied to leakage current analysis in pursuit of higher simulation speed. Simulation results show that the novel physical models are in ex-cellent agreement with the data measured from the foundry in the 65 nm process, and the proposed table look-up models can provide great computational efficiency by using suitable interpolation techniques. Compared with the traditional physical-based models, the table look-up models can achieve 2.5X speedup on average on a variety of industry circuits.

  12. Where Is Current Research on Blockchain Technology?—A Systematic Review

    Science.gov (United States)

    Yli-Huumo, Jesse; Ko, Deokyoon; Park, Sooyong; Smolander, Kari

    2016-01-01

    Blockchain is a decentralized transaction and data management technology developed first for Bitcoin cryptocurrency. The interest in Blockchain technology has been increasing since the idea was coined in 2008. The reason for the interest in Blockchain is its central attributes that provide security, anonymity and data integrity without any third party organization in control of the transactions, and therefore it creates interesting research areas, especially from the perspective of technical challenges and limitations. In this research, we have conducted a systematic mapping study with the goal of collecting all relevant research on Blockchain technology. Our objective is to understand the current research topics, challenges and future directions regarding Blockchain technology from the technical perspective. We have extracted 41 primary papers from scientific databases. The results show that focus in over 80% of the papers is on Bitcoin system and less than 20% deals with other Blockchain applications including e.g. smart contracts and licensing. The majority of research is focusing on revealing and improving limitations of Blockchain from privacy and security perspectives, but many of the proposed solutions lack concrete evaluation on their effectiveness. Many other Blockchain scalability related challenges including throughput and latency have been left unstudied. On the basis of this study, recommendations on future research directions are provided for researchers. PMID:27695049

  13. Where Is Current Research on Blockchain Technology?-A Systematic Review.

    Science.gov (United States)

    Yli-Huumo, Jesse; Ko, Deokyoon; Choi, Sujin; Park, Sooyong; Smolander, Kari

    2016-01-01

    Blockchain is a decentralized transaction and data management technology developed first for Bitcoin cryptocurrency. The interest in Blockchain technology has been increasing since the idea was coined in 2008. The reason for the interest in Blockchain is its central attributes that provide security, anonymity and data integrity without any third party organization in control of the transactions, and therefore it creates interesting research areas, especially from the perspective of technical challenges and limitations. In this research, we have conducted a systematic mapping study with the goal of collecting all relevant research on Blockchain technology. Our objective is to understand the current research topics, challenges and future directions regarding Blockchain technology from the technical perspective. We have extracted 41 primary papers from scientific databases. The results show that focus in over 80% of the papers is on Bitcoin system and less than 20% deals with other Blockchain applications including e.g. smart contracts and licensing. The majority of research is focusing on revealing and improving limitations of Blockchain from privacy and security perspectives, but many of the proposed solutions lack concrete evaluation on their effectiveness. Many other Blockchain scalability related challenges including throughput and latency have been left unstudied. On the basis of this study, recommendations on future research directions are provided for researchers.

  14. EXCEDE Technology Development III: First Vacuum Tests

    CERN Document Server

    Belikov, Ruslan; Pluzhnik, Eugene; Hix, Troy T; Bendek, Eduardo; Thomas, Sandrine J; Lynch, Dana H; Mihara, Roger; Irwin, J Wes; Duncan, Alan L; Greene, Thomas P; Guyon, Olivier; Kendrick, Richard L; Smith, Eric H; Witteborn, Fred C; Schneider, Glenn

    2014-01-01

    This paper is the third in the series on the technology development for the EXCEDE (EXoplanetary Circumstellar Environments and Disk Explorer) mission concept, which in 2011 was selected by NASA's Explorer program for technology development (Category III). EXCEDE is a 0.7m space telescope concept designed to achieve raw contrasts of 1e6 at an inner working angle of 1.2 l/D and 1e7 at 2 l/D and beyond. This will allow it to directly detect and spatially resolve low surface brightness circumstellar debris disks as well as image giant planets as close as in the habitable zones of their host stars. In addition to doing fundamental science on debris disks, EXCEDE will also serve as a technological and scientific precursor for any future exo-Earth imaging mission. EXCEDE uses a Starlight Suppression System (SSS) based on the PIAA coronagraph, enabling aggressive performance. We report on our continuing progress of developing the SSS for EXCEDE, and in particular (a) the reconfiguration of our system into a more fli...

  15. Web Development Technology-PHP. How It Is Related To Web Development Technology ASP.NET

    Directory of Open Access Journals (Sweden)

    Manya Sharma

    2015-01-01

    Full Text Available ABSTRACT This paper tells about the technologies used in PHP and how they are related to ASP.NET. The paper begin with the introduction of PHP defining what and how technologies has been used in development of User Complaint Web Application. How thistechnology is related to ASP.NET in features such as implementation functionality validation and proactive behavior involved in validating user input from the browser providing users feedback overall time consumed in development and maintenance.

  16. Game development and simulation with unreal technology

    CERN Document Server

    Tavakkoli, Alireza

    2015-01-01

    Game Development and Simulation with Unreal Technology explores the use of Unreal Engine 4 (UE4) for the development of real-time digital interactive contents to be used in computerized games or simulations. The engine is considered in three main iterations: from the basic use of the engine to build games and simulation content out of the box, to intermediate design of interactive content by building on the pre-supplied contents from the base engine, and through advanced implementations geared toward a comprehensive understanding of the power of the Unreal Engine. This is one of the first book

  17. Development of Fundamental Technologies for Micro Bioreactors

    Science.gov (United States)

    Sato, Kiichi; Kitamori, Takehiko

    This chapter reviews the development of fundamental technologies required for microchip-based bioreactors utilizing living mammalian cells and pressure driven flow. The most important factor in the bioreactor is the cell culture. For proper cell culturing, continuous medium supply from a microfluidic channel and appropriate modification of the channel surface to accommodate cell attachment is required. Moreover, the medium flow rate should be chosen carefully, because shear stress affects cell activity. The techniques presented here could be applied to the development of micro bioreactors such as microlivers, pigment production by plant cells, and artificial insemination.

  18. Space Technology 5 (ST-5) Observations of the Imbalance of Region 1 and 2 Field-Aligned Currents

    Science.gov (United States)

    Le, Guan

    2010-01-01

    Space Technology 5 (ST-5) is a three micro-satellite constellation deployed into a 300 x 4500 km, dawn-dusk, sun-synchronous polar orbit from March 22 to June 21, 2006, for technology validations. In this study, we use the in-situ magnetic field observations from Space Technology 5 mission to quantify the imbalance of Region 1 (R1) and Region 2 (R2) currents. During the three-month duration of the ST5 mission, geomagnetic conditions range from quiet to moderately active. We find that the R1 current intensity is consistently stronger than the R2 current intensity both for the dawnside and the duskside large-scale field-aligned current system. The net currents flowing into (out of) the ionosphere in the dawnside (duskside) are in the order of 5% of the total RI currents. We also find that the net currents flowing into or out of the ionosphere are controlled by the solar wind-magnetosphere interaction in the same way as the field-aligned currents themselves are. Since the net currents due to the imbalance of the R1 and R2 currents require that their closure currents flow across the polar cap from dawn to dusk as Pedersen currents, our results indicate that the total amount of the cross-polar cap Pedersen currents is in the order of approx. 0.1 MA. This study, although with a very limited dataset, is one of the first attempts to quantify the cross-polar cap Pedersen currents. Given the importance of the Joule heating due to Pedersen currents to the high-latitude ionospheric electrodynamics, quantifying the cross-polar cap Pedersen currents and associated Joule heating is needed for developing models of the magnetosphere-ionosphere coupling.

  19. Effective Professional Development for Technology Teachers.

    Science.gov (United States)

    Bybee, Rodger W.

    2001-01-01

    Effective professional development has the learning of all students at its core, focuses on expert and unique knowledge, recognizes that principles for improving student learning also guide professional learning, acknowledges learners' current understanding, and aligns with system-based changes. (JOW)

  20. Tracing Impacts of Science and Technology Development

    Science.gov (United States)

    Powell, Jeanne

    2003-03-01

    ATP's Mission and Operations. The ATP partners with industry to accelerate the development of innovative technologies for broad national economic benefit. The program's focus is on co-funding collaborative, multi-disciplinary technologies and enabling technology platforms that appear likely to be commercialized, with private sector funding, once the high technical risks are reduced. Industry-led projects are selected for funding in rigorous competitions on the basis of technical and economic merit. Since 1990, ATP has co-funded 642 projects, with 1,329 participants and another 1,300 subcontractors. Measuring to Mission: Overview of ATP's Evaluation Program. ATP's multi-component evaluation strategy provides measures of progress and performance matched to the stage of project evolution; i.e., for the short-term, from the time of project selection and over the course of the R for the mid-term, as commercial applications are pursued, early products reach the market, and dissemination of knowledge created in the R projects occurs; and for the longer-term, as more fully-developed technologies diffuse across multiple products and industries. The approach is applicable to all public S programs and adaptable to private or university projects ranging from basic research to applied industrial R. Examples of Results. ATP's composite performance rating system assesses ATP's completed projects against multi-faceted performance criteria of Knowledge Creation and Dissemination and Commercialization Progress 2-3 years after the end of ATP-funded R. It generates scores ranging from zero to four stars. Results for ATP's first 50 completed projects show that 16are in the bottom group of zero or one stars. 60the middle group. It is understood that not all ATP projects will be successful given the program's emphasis on funding high-risk technology development that the private sector is unwilling and unable to fund alone. Different technologies have different timelines for

  1. [Industry of traditional Chinese patent medicine science and technology development and review].

    Science.gov (United States)

    Lu, Jianwei; Wang, Fang; Yan, Dongmei; Luo, Yun; Yang, Ming

    2012-01-01

    "Fifteen" since, our country Chinese traditional medicine industry science and technology has made remarkable achievements. In this paper, the development of science and technology policy, Chinese medicine industry, platform construction and other aspects were analyzed, showing 10 years of Chinese traditional medicine industry development of science and technology innovation achievement and development, and on the current development of traditional Chinese medicine industry facing the main tasks and guarantee measures are analyzed.

  2. ZERO EMISSION POWER GENERATION TECHNOLOGY DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Bischoff; Stephen Doyle

    2005-01-20

    Clean Energy Systems (CES) was previously funded by DOE's ''Vision 21'' program. This program provided a proof-of-concept demonstration that CES' novel gas generator (combustor) enabled production of electrical power from fossil fuels without pollution. CES has used current DOE funding for additional design study exercises which established the utility of the CES-cycle for retrofitting existing power plants for zero-emission operations and for incorporation in zero-emission, ''green field'' power plant concepts. DOE funding also helped define the suitability of existing steam turbine designs for use in the CES-cycle and explored the use of aero-derivative turbines for advanced power plant designs. This work is of interest to the California Energy Commission (CEC) and the Norwegian Ministry of Petroleum & Energy. California's air quality districts have significant non-attainment areas in which CES technology can help. CEC is currently funding a CES-cycle technology demonstration near Bakersfield, CA. The Norwegian government is supporting conceptual studies for a proposed 40 MW zero-emission power plant in Stavager, Norway which would use the CES-cycle. The latter project is called Zero-Emission Norwegian Gas (ZENG). In summary, current engineering studies: (1) supported engineering design of plant subsystems applicable for use with CES-cycle zero-emission power plants, and (2) documented the suitability and availability of steam turbines for use in CES-cycle power plants, with particular relevance to the Norwegian ZENG Project.

  3. Industrialized Development Models of Agricultural Scientific and Technological Achievements

    Institute of Scientific and Technical Information of China (English)

    Wanjiang; WANG

    2015-01-01

    Industrialization of agricultural scientific and technological achievements has become an extremely important part in agricultural structural adjustment and agricultural economic development. Basic models for industrialization of China’s agricultural scientific and technological achievements should be:( i) integrating scientific and technological development and production relying on large enterprises;( ii) integrating scientific research and development with agricultural scientific and technological achievements and scientific research institutions as support;( iii) spindle type transformation;( vi) agricultural scientific and technological demonstration area;( v) technology extension network.

  4. Industrial applications and current trends in supercritical fluid technologies

    Directory of Open Access Journals (Sweden)

    Gamse Thomas

    2005-01-01

    Full Text Available Supercritical fluids have a great potential for wide fields of processes Although CO2 is still one of the most used supercritical gases, for special purposes propane or even fluorinated-chlorinated fluids have also been tested. The specific characteristics of supercritical fluids behaviour were analyzed such as for example the solubilities of different components and the phase equilibria between the solute and solvent. The application at industrial scale (decaffeinating of tea and coffee, hop extraction or removal of pesticides from rice, activity in supercritical extraction producing total extract from the raw material or different fractions by using the fractionated separation of beverages (rum, cognac, whisky, wine, beer cider, of citrus oils and of lipids (fish oils, tall oil were also discussed. The main interest is still for the extraction of natural raw materials producing food ingredients, nutraceuticals and phytopharmaceuticals but also cleaning purposes were tested such as the decontamination of soils the removal of residual solvents from pharmaceutical products, the extraction of flame retardants from electronic waste or precision degreasing and cleaning of mechanical and electronic parts. An increasing interest obviously exists for impregnation purposes based on supercritical fluids behaviour, as well as for the dying of fibres and textiles. The production of fine particles in the micron and submicron range, mainly for pharmaceutical products is another important application of supercritical fluids. Completely new products can be produced which is not possible under normal conditions. Supercritical fluid technology has always had to compete with the widespread opinion that these processes are very expensive due to very high investment costs in comparison with classical low-pressure equipment. Thus the opinion is that these processes should be restricted to high-added value products. A cost estimation for different plant sizes and

  5. Current status of assisted reproductive technology in Korea, 2011.

    Science.gov (United States)

    Lee, Gyoung Hoon; Song, Hyun Jin; Lee, Kyu Sup; Choi, Young Min

    2016-03-01

    The number of assisted reproductive technology (ART) clinics, ART cycles, clinical pregnancy rate (CPR), and number of newborns conceived using ART have steadily increased in South Korea. This aim of this study was to describe the status of ART in South Korea between January 1 and December 31, 2011. A localized online survey was created and sent to all available ART centers via email in 2015. Fresh embryo transfer (FET) cases were categorized depending on whether standard in vitro fertilization, intracytoplasmic sperm injection (ICSI), or half-ICSI procedures were used. Thawed embryo transfer (TET) and other related procedures were surveyed. Data from 36,990 ART procedures were provided by 74 clinics. Of the 30,410 cycles in which oocytes were retrieved, a complete transfer was performed in 91.0% (n=27,683). In addition, 9,197 cycles were confirmed to be clinical pregnancies in the FET cycles, representing a pregnancy rate of 30.2% per oocyte pick-up and 33.2% per ET. The most common number of embryos transferred in the FET procedures was three (38.1%), followed by two (34.7%) and one (14.3%). Of the 8,826 TET cycles, 3,137 clinical pregnancies (31.1%) were confirmed by ultrasonography. While the overall clinical pregnancy rate for the TET cycles performed was lower than the rate reported in 2010 (31.1% vs. 35.4%), the overall CPR for the FET cycles was higher than in 2010 (33.2% in 2011 and 32.9% in 2010). The most common number of embryos transferred in FET cycles was three, as was the case in 2010.

  6. Rock grouting. Current competence and development for the final repository

    Energy Technology Data Exchange (ETDEWEB)

    Emmelin, Ann (Swedish Nuclear Fuel and Waste Management Co., Stockholm (SE)); Brantberger, Martin (Ramboell (SE)); Eriksson, Magnus (Vattenfall Power Consultant (SE)); Gustafson, Gunnar (Chalmers Univ. of Technology, Goeteborg (SE)); Stille, Haakan (Royal Inst. of Technology, Stockholm (SE))

    2007-06-15

    The report aims at presenting the overall state of grouting competence and development relating to the final repository and at motivating and giving detail to the grouting sections presented in the 2007 version of the overall SKB report 'Programme for research, development and demonstration of methods for the management and disposal of nuclear waste' that is presented to the government every three years. The report offers suggestions for principles for planning, design and execution of grouting and describes the further work thought to be necessary in order to meet the requirements of the final repository, that are currently given as working premises. This report does not aim to, and cannot, describe the grouting processes in detail. For details of current concepts, experience and development work, a list of references is provided. In Chapter 2, the task of sealing the underground repository is examined and an overall approach presented. Although the requirements related to this task are preliminary, it is made evident that they concern both the actual grouting results and the process leading to the achievement of these results. Chapter 3 is a conceptual description of grouting and the factors that govern the spreading of grout in the rock mass. It is intended as an introduction to Chapters 4-6, which describe the state of grouting competence and the tools available for the sealing of the final repository facility. Both common practice and cutting-edge research are dealt with in these chapters, mainly relying on references where available. Chapters 4 and 5 focus on the system consisting of the fundamental components the rock mass, the grout materials and the grouting technology, and how these system components interact whilst, in Chapter 6, the rock/grout technical system is viewed in a brief organizational context. Based on the requirements on results and the overall grouting process on the one hand and the current competence in grouting theory and

  7. NASA Solar Sail Propulsion Technology Development

    Science.gov (United States)

    Johnson, Les; Montgomery, Edward E.; Young, Roy; Adams, Charles

    2007-01-01

    NASA's In-Space Propulsion Technology Program has developed the first generation of solar sail propulsion systems sufficient to accomplish inner solar system science and exploration missions. These first generation solar sails, when operational, will range in size from 40 meters to well over 100 meters in diameter and have an areal density of less than 13 grams per square meter. A rigorous, multi-year technology development effort culminated in 2005 with the testing of two different 20-m solar sail systems under thermal vacuum conditions. The first system, developed by ATK Space Systems of Goleta, California, uses rigid booms to deploy and stabilize the sail. In the second approach, L'Garde, Inc. of Tustin, California uses inflatable booms that rigidize in the coldness of space to accomplish sail deployment. This effort provided a number of significant insights into the optimal design and expected performance of solar sails as well as an understanding of the methods and costs of building and using them. In a separate effort, solar sail orbital analysis tools for mission design were developed and tested. Laboratory simulations of the effects of long-term space radiation exposure were also conducted on two candidate solar sail materials. Detailed radiation and charging environments were defined for mission trajectories outside the protection of the earth's magnetosphere, in the solar wind environment. These were used in other analytical tools to prove the adequacy of sail design features for accommodating the harsh space environment. Preceding and in conjunction with these technology efforts, NASA sponsored several mission application studies for solar sails. Potential missions include those that would be flown in the near term to study the sun and be used in space weather prediction to one that would use an evolved sail capability to support humanity's first mission into nearby interstellar space. This paper will describe the status of solar sail propulsion within

  8. Cost comparison modeling between current solder sphere attachment technology and solder jetting technology

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, R.N.

    1996-10-01

    By predicting the total life-cycle cost of owning and operating production equipment, it becomes possible for processors to make accurate and intelligent decisions regarding major capitol equipment investments as well as determining the most cost effective manufacturing processes and environments. Cost of Ownership (COO) is a decision making technique based on inputting the total costs of acquiring, operating and maintaining production equipment. All quantitative economic and production data can be modeled and processed using COO software programs such as the Cost of Ownership Luminator program TWO COOL{trademark}. This report investigated the Cost of Ownership differences between the current state-of-the-art solder ball attachment process and a prototype solder jetting process developed by Sandia National Laboratories. The prototype jetting process is a novel and unique approach to address the anticipated high rate ball grid array (BGA) production requirements currently forecasted for the next decade. The jetting process, which is both economically and environmentally attractive eliminates the solder sphere fabrication step, the solder flux application step as well as the furnace reflow and post cleaning operations.

  9. 78 FR 3019 - Privacy Act of 1974; Science & Technology Directorate-001 Research, Development, Test, and...

    Science.gov (United States)

    2013-01-15

    ... of, or during the conduct of, Science & Technology-funded research, development, test, and evaluation...) proposes to update and reissue a current DHS system of records titled, ``DHS/S&T-001 Research, Development...) Science & Technology Directorate's (S&T) mission is to conduct research, development, testing, and...

  10. Life cycle Greenhouse gas emissions of current Oil Sands Technologies: surface mining and in situ applications.

    Science.gov (United States)

    Bergerson, Joule A; Kofoworola, Oyeshola; Charpentier, Alex D; Sleep, Sylvia; Maclean, Heather L

    2012-07-17

    Life cycle greenhouse gas (GHG) emissions associated with two major recovery and extraction processes currently utilized in Alberta's oil sands, surface mining and in situ, are quantified. Process modules are developed and integrated into a life cycle model-GHOST (GreenHouse gas emissions of current Oil Sands Technologies) developed in prior work. Recovery and extraction of bitumen through surface mining and in situ processes result in 3-9 and 9-16 g CO(2)eq/MJ bitumen, respectively; upgrading emissions are an additional 6-17 g CO(2)eq/MJ synthetic crude oil (SCO) (all results are on a HHV basis). Although a high degree of variability exists in well-to-wheel emissions due to differences in technologies employed, operating conditions, and product characteristics, the surface mining dilbit and the in situ SCO pathways have the lowest and highest emissions, 88 and 120 g CO(2)eq/MJ reformulated gasoline. Through the use of improved data obtained from operating oil sands projects, we present ranges of emissions that overlap with emissions in literature for conventional crude oil. An increased focus is recommended in policy discussions on understanding interproject variability of emissions of both oil sands and conventional crudes, as this has not been adequately represented in previous studies.

  11. Developments in distributed optical fiber detection technology

    Science.gov (United States)

    Ye, Wei; Zhu, Qianxia; You, Tianrong

    2014-12-01

    The distributed optical fiber detection technology plays an important role in many fields, such as key regional security monitoring, pipeline maintenance and communication cable protection. It is superior to the traditional detector, and has a good prospect. This paper presents an overview of various distributed optical fiber sensors. At first, some related technologies of the optical fiber detection schemes are introduced in respect of sensing distance, real-time ability, signal strength, and system complexity; and the advantages and limitations of fiber gratings sensors, reflection-based optical fiber sensors, and interference- based optical fiber sensors are discussed. Then some advanced distributed optical fiber detection systems are mentioned. And the double-loop Sagnac distributed system is improved by adding photoelectric modulators and depolarizers. In order to denoise and enhance the original signal, a spectral subtraction-likelihood ratio method is improved. The experiment results show the spatial resolution is +/-15m per kilometer. Finally, based on the development trends of optical fiber detection technology at home and abroad, development tendency and application fields are predicted.

  12. Environmental technology development through industry partnership

    Energy Technology Data Exchange (ETDEWEB)

    Sebastion, R.L.

    1995-12-31

    The Coherent Laser Vision System (CLVS) is being developed to provide precision real-time 3D world views to support site characterization and robotic operations and during facilities Decontamination and Decommissioning. Autonomous or semiautonomous robotic operations requires an accurate, up-to-date 3D world view. Existing technologies for real-time 3D imaging, such as AM laser radar, have limited accuracy at significant ranges and have variability in range estimates caused by lighting or surface shading. Recent advances in fiber optic component technology and digital processing components have enabled the development of a new 3D vision system based upon a fiber optic FMCW coherent laser radar. The approach includes a compact scanner with no-moving parts capable of randomly addressing all pixels. The system maintains the immunity to lighting and surface shading conditions which is characteristic to coherent laser radar. The random pixel addressability allows concentration of scanning and processing on the active areas of a scene, as is done by the human eye-brain system. The precision measurement capability of the coherent laser radar (CLR) technology has already been demonstrated in the form of the CLR 3D Mapper, of which several copies have been delivered or are under order. The CLVS system, in contrast to the CLR 3D Mapper, will have substantially greater imaging speed with a compact no-moving parts scanner, more suitable for real-time robotic operations.

  13. Small Hydropower Research and Development Technology Project

    Energy Technology Data Exchange (ETDEWEB)

    Blackmore, Mo [Near Space Systems, Inc.

    2013-12-06

    The objective of this work was to investigate, develop, and validate the next generation of small hydroturbine generator designs that maximize the energy transfer from flowing water to electrical power generation. What resulted from this effort was the design of a new technology hydroturbine that Near Space Systems (NSS) has named the Star*Stream© Hydroturbine. Using a design that eliminates nearly all of the shortfalls of conventional hydroturbines, the Star*Stream© Hydroturbine employs a new mechanical-to-electrical energy transfer hydro design that operates without lubrication of any kind, and does not introduce foreign chemicals or particulate matter from oil or drive shaft seal degradation into the hydro ecology. In its unique configuration, the Star*Stream© Hydroturbine is nearly environmentally inert, without the negative aspects caused by interrupting the ecological continuity, i.e., disruptions to sedimentation, water quality, habitat changes, human displacement, fish migration, etc., - while it ensures dramatically reduced timeframes to project completion. While a remarkable reduction in LCOE resulting from application of the Star*Stream© Hydroturbine technology has been the core achievement of the this effort, there have been numerous technological breakthroughs from the development effort.

  14. Development of Solid State Laser Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Byung Heon; Kwon, Seong Ok; Kim, Yong Ki (and others)

    2007-04-15

    Recently, diode-pumped solid state lasers(DPSSL) have been developed to have a diffraction limited beam quality and high average output powers beyond kW. The lifetime extends to have several thousand hours. Due to such merits, the DPSSLs are now replacing previous application fields of CO{sub 2} laser, lamp-pumped solid-state lasers, Excimer laser, etc. The DPSSLs have broad application fields, such as laser spectroscopy and analysis, laser micromachining, precision measurement, laser range findings, laser pump sources, medical lasers, etc. In this project, various DPSSLs are developed for use in laser isotope production. Many new laser modules are designed and used to develop high power pulsed IR lasers and green lasers. In addition, a quasi CW driven compact DPSSL is developed to have high pulse energy DPSSL technologies.

  15. Survey of Current and Next Generation Space Power Technologies

    Science.gov (United States)

    2006-06-26

    porous carbon and sulfur dioxide (or thionyl chloride ), electrolyte of acetronitrile and lithium bromide salt, the lithium sulfur dioxide chemistry...TRL 6); recent laboratory developments have yielded energy densities of 600 Wh/kg22. Lithium -Air- Lithium -air batteries consist of lithium anodes...generation, battery types are discussed below and a comparative table of traditional non- lithium , terrestrial battery types are presented in Table 11

  16. Research and development of biochip technologies in Taiwan

    Science.gov (United States)

    Ting, Solomon J.; Chiou, Arthur E. T.

    2000-07-01

    Recent advancements in several genome-sequencing projects have stimulated an enormous interest in microarray DNA chip technology, especially in the biomedical sciences and pharmaceutical industries. The DNA chips facilitated the miniaturization of conventional nucleic acid hybridizations, by either robotically spotting thousands of library cDNAs or in situ synthesis of high-density oligonucleotides onto solid supports. These innovations have found a wide range of applications in molecular biology, especially in studying gene expression and discovering new genes from the global view of genomic analysis. The research and development of this powerful tool has also received great attentions in Taiwan. In this paper, we report the current progresses of our DNA chip project, along with the current status of other biochip projects in Taiwan, such as protein chip, PCR chip, electrophoresis chip, olfactory chip, etc. The new development of biochip technologies integrates the biotechnology with the semiconductor processing, the micro- electro-mechanical, optoelectronic, and digital signal processing technologies. Most of these biochip technologies utilitze optical detection methods for data acquisition and analysis. The strengths and advantages of different approaches are compared and discussed in this report.

  17. Development of Interconnect Technologies for Particle Detectors

    Energy Technology Data Exchange (ETDEWEB)

    Tripathi, Mani [Univ. of California, Davis, CA (United States)

    2015-01-29

    This final report covers the three years of this grant, for the funding period 9/1/2010 - 8/31/2013. The project consisted of generic detector R&D work at UC Davis, with an emphasis on developing interconnect technologies for applications in HEP. Much of the work is done at our Facility for Interconnect Technologies (FIT) at UC Davis. FIT was established using ARRA funds, with further studies supported by this grant. Besides generic R&D work at UC Davis, FIT is engaged in providing bump bonding help to several DOE supported detector R&D efforts. Some of the developmental work was also supported by funding from other sources: continuing CMS project funds and the Linear Collider R&D funds. The latter program is now terminated. The three year program saw a good deal of progress on several fronts, which are reported here.

  18. Hydraulic hammer drilling technology: Developments and capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Melamed, Y.; Kiselev, A. [SKB Geotechnika, Moscow (Russian Federation); Gelfgat, M. [Aquatic Co., Moscow (Russian Federation); Dreesen, D.; Blacic, J. [Los Alamos National Lab., NM (United States). GeoEngineering Group

    1996-12-31

    Percussion drilling technology was considered many years ago as one of the best approaches for hard rock drilling. Unfortunately the efficiency of most hydraulic hammer (HH) designs was very low (8% maximum), so they were successfully used in shallow boreholes only. Thirty years of research and field drilling experience with HH application in Former Soviet Union (FSU) countries led to the development of a new generation of HH designs with a proven efficiency of 40%. That advance achieved good operational results in hard rock at depths up to 2,000 m and more. The most recent research has shown that there are opportunities to increase HH efficiency up to 70%. This paper presents HH basic design principles and operational features. The advantages of HH technology for coiled-tubing drilling is shown on the basis of test results recently conducted in the US.

  19. Aluminate solution decomposition new technology development

    Energy Technology Data Exchange (ETDEWEB)

    Abramov, V.Ya.; Stelmakova, G.D. [Scientific Technical Centre Reactor, Moscow (Russian Federation)

    1996-10-01

    Scientific Technical Centre Reactor together with SC Aluminy carried out the number of investigations in the field of aluminum solution decomposition new technology development. It was based on large prime ratio on one hand, and liquid-solid countercurrent flow movement on the other hand. Practically the suggested technology was considered to be the result of unstationary, mass-transfer theory, which had been checked up at 100 m3 plot scale plant. Hydrate washing was accomplished at the first stage under the condition of countercurrent flow and less than 1 m3 water discharge. The experiments of 3.2--3.3 caustic module aluminate solution decomposition were carried out at the second stage. While full reactor 20 hour regime operation the caustic module increased till 4.1. Usually it accounts 3.7 under the analogous conditions and time.

  20. Thermoelectric Energy Conversion: Future Directions and Technology Development Needs

    Science.gov (United States)

    Fleurial, Jean-Pierre

    2007-01-01

    This viewgraph presentation reviews the process of thermoelectric energy conversion along with key technology needs and challenges. The topics include: 1) The Case for Thermoelectrics; 2) Advances in Thermoelectrics: Investment Needed; 3) Current U.S. Investment (FY07); 4) Increasing Thermoelectric Materials Conversion Efficiency Key Science Needs and Challenges; 5) Developing Advanced TE Components & Systems Key Technology Needs and Challenges; 6) Thermoelectrics; 7) 200W Class Lightweight Portable Thermoelectric Generator; 8) Hybrid Absorption Cooling/TE Power Cogeneration System; 9) Major Opportunities in Energy Industry; 10) Automobile Waste Heat Recovery; 11) Thermoelectrics at JPL; 12) Recent Advances at JPL in Thermoelectric Converter Component Technologies; 13) Thermoelectrics Background on Power Generation and Cooling Operational Modes; 14) Thermoelectric Power Generation; and 15) Thermoelectric Cooling.