WorldWideScience

Sample records for current meter moorings

  1. Current meter and temperature profile data from moored current meter casts in the TOGA area - Atlantic Ocean from 10 September 1970 - 27 October 1980 (NODC Accession 8600320)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter and temperature profile data were collected using moored current meter - PCM casts in the TOGA area - Atlantic Ocean from September 10, 1970 to October...

  2. Data report for current meters on Mooring CMMW-4, 1981; Pacific study area W-N

    International Nuclear Information System (INIS)

    Pillsbury, R.D.; Bottero, J.; Still, R.E.; Heath, G.R.

    1985-01-01

    The mooring designated CMMW-4 was installed on cruise W8103A by R/V Wecoma during March, 1981. It was recovered by the same ship 5 months later. All four meters from the mooring were recovered and gave good data. CMMW-4 is the continuation of the central series of W-N moorings (it was preceded by CMMW-1, 2, and 3). The series is designed to determined the long-term mean flow at W-N; and in combination with spatial data from CMMW-5 to 9, it will provide input data for a circulation model of the eastern Pacific. The CMMW-4 results re-establish the net SSE current trends evident in CMMW-1. The eddy-like feature in the CMMW-2 records has moved on. The low-frequency component of the deep meter records is quite coherent, but some shear is evident between 1250 and 3000 meters. 5 references, 54 figures, 1 tables

  3. Indian Moorings: Deep-sea current meter moorings in the Eastern Equatorial Indian Ocean

    Digital Repository Service at National Institute of Oceanography (India)

    Murty, V.S.N.; Sarma, M.S.S.; Suryanarayana, A.; Sengupta, D.; Unnikrishnan, A.S.; Fernando, V.; Almeida, A.; Khalap, S.; Sardar, A.; Somasundar, K.; Ravichandran, M.

    understanding and ability to predict the monsoons and related climate phenomena in much the same way as TAO/TRITON and PIRATA have advanced studies of ENSO and Tropical Atlantic climate variability. Acknowledgments The authors would like to thank the CLIVAR..., for assistance with logistic support; NOAA’s Office of Climate Observation for financial support; and JAMSTEC for its support of the TRITON mooring program. References Duval, J.P. and J. vialard, 2006: The VASCO-CIRENE experiment. Proc 27th AMS Conference...

  4. Moored current meter data from the Madeira Abyssal Plain (GME). 1. deployment (1984)

    International Nuclear Information System (INIS)

    Saunders, P.M.

    1986-01-01

    Near bottom current have been measured at three closely spaced sites in the N.E. Atlantic for 13 months. Locations were selected in the Great Meteor East study site area, near 31 0 30'N 25 0 W, one on the abyssal plain, one on top of a small abyssal hill about 400 m high and one on its flank just above the plain. Current meters were moored 10, 100, and 1000 m above the local bottom (5438 m, 5398 m and 4999 m) in January 1984 and recovered in February 1985. This report displays the characteristics of the currents in numerous tables and figures. In the mean they ar found to be very weak and though adjacent moorings are separated by only 12 km and 27 km the year-long current directions differ radically. Current variations are principally due to semi-diurnal tides, inertial oscillations and eddies the latter of which migrate over the moorings. The tidal energy meets expectations as does the eddy energy with magnitude 2-3 cm 2 s -2 . Horizontal (isopycnal) diffusivity is estimated as about 2x10 2 m 2 s -1 . Currents 10 m above the bottom exceed 10 cm/s least frequently on the plain and most frequently at the hill-foot. The influence of the hill is surprisingly large. At all three sites the strongest currents are found near the sea bed. Speeds also show a Weibull distribution and rough 50 year return currents are inferred. (author)

  5. Current meter data from moored current meter casts in the Pacific Ocean as part of the Equatorial Pacific Ocean Climate Studies (EPOCS) project from 1979-01-20 to 1984-04-26 (NODC Accession 8500007)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Pacific Ocean from January 20, 1979 to April 26, 1984. Data were submitted by Pacific...

  6. Current meter data from moored current meter casts in the Pacific Ocean as part of the Equatorial Pacific Ocean Climate Studies (EPOCS) project from 1986-05-28 to 1987-05-11 (NODC Accession 8900168)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Pacific Ocean from 28 May 1986 to 01 May 1983. Data were submitted by Pacific Marine...

  7. Current meter data from moored current meter casts in the Puget Sound as part of the Mesa Puget Sound/PSERP project, 1976-02-13 to 1976-05-01 (NODC Accession 7601638)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Puget Sound from February 13, 1976 to May 1, 1976. Data were submitted by Pacific Marine...

  8. Current meter data from moored current meter casts in the Coastal Waters of Washington/Oregon as part of the Land-Margin Ecosystem Research (LEML) project, 06 May 1997 - 19 October 1997 (NODC Accession 9800193)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Coastal Waters of Washington/Oregon from May 6, 1997 to October 19, 1997. Data were...

  9. Current meter data from moored current meter casts in the Caribbean Sea as part of the Ocean Thermal Energy Conversion (OTEC) project from 1979-09-27 to 1979-12-01 (NODC Accession 8100607)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Caribbean Sea from September 27, 1979 to December 1, 1979. Data were submitted by...

  10. Current meter data from moored current meter casts in the Pacific Ocean as part of the Equatorial Pacific Ocean Climate Studies (EPOCS) project from 1979-01-20 to 1984-04-01 (NODC Accession 8700077)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Pacific Ocean from January 20, 1979 to April 1, 1984. Data were submitted by Pacific Marine...

  11. Current meter data from moored current meter casts in the South Pacific Ocean as part of the Equatorial Pacific Ocean Climate Studies (EPOCS) project from 1981-11-21 to 1983-11-20 (NODC Accession 8500258)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the South Pacific Ocean from November 21, 1981 to November 20, 1983. Data were submitted by...

  12. Current meter data from moored current meter casts in the Pacific Ocean as part of the Equatorial Pacific Ocean Climate Studies (EPOCS) project from 1990-04-30 to 1991-05-15 (NODC Accession 9400005)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Pacific Ocean from April 30, 1990 to May 15, 1991. Data were submitted by Pacific Marine...

  13. Current meter data from moored current meter casts and other instruments in the Northwest and Southwest Pacific Ocean from 01 October 1992 to 15 March 1993 (NODC Accession 9400088)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts and other instruments in the Northwest and Southwest Pacific Ocean from October 1, 1992 to March...

  14. Current meter data from moored current meter casts in the Northeast Pacific Ocean as part of the Ocean Prediction Through Observation Modeling and Analysis (OPTOMA) project, 1984-09-26 to 1985-07-16 (NODC Accession 9600075)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Northeast Pacific Ocean from September 26, 1984 to July 16, 1985. Data were submitted by...

  15. Current meter data from moored current meter casts in the Puget Sound as part of the Mesa Puget Sound/PSERP project, 1977-02-23 to 1977-12-11 (NODC Accession 7900307)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Puget Sound from February 23, 1977 to December 11, 1977. Data were submitted by Pacific...

  16. Current meter data from moored current meter casts in the Puget Sound as part of the Mesa Puget Sound/PSERP project, 1977-12-14 to 1978-04-19 (NODC Accession 8000053)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Puget Sound from December 14, 1977 to April 19, 1978. Data were submitted by Pacific Marine...

  17. Current meter data from moored current meter casts and other instruments in the TOGA Area - Pacific Ocean (30 N to 30 S) from 1992-01-01 to 1993-02-17 (NODC Accession 9600019)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts and other instruments in the TOGA Area - Pacific Ocean (30 N to 30 S) from January 1, 1992 to...

  18. Current meter data from moored current meter casts in the Northeast Pacific Ocean as part of the Flow Over Abrupt Topography project from 1990-01-06 to 1991-12-03 (NODC Accession 9500077)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Northeast Pacific Ocean from January 6, 1990 to December 3, 1991. Data were submitted by...

  19. Current meter data from moored current meter casts in the Caribbean Sea as part of the Ocean Thermal Energy Conversion (OTEC) project from 1979-02-15 to 1980-02-01 (NODC Accession 8100608)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Caribbean Sea from February 15, 1979 to February 1, 1980. Data were submitted by University...

  20. Current meter data from moored current meter casts in the Gulf of Mexico as part of the Ocean Thermal Energy Conversion (OTEC) project from 18 October 1977-10-18 to 1979-07-01 (NODC Accession 8000284)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Gulf of Mexico from October 18, 1977 to June 1, 1979. Data were submitted by Atlantic...

  1. Current meter data from moored current meter casts in the Puget Sound as part of the Long-Range Effects Program Puget Sound project from 1983-11-29 to 1984-08-01 (NODC Accession 8800119)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Puget Sound from November 29, 1983 to August 1, 1984. Data were submitted by Pacific Marine...

  2. Conductivity data from moored current meter casts in the North Pacific Ocean from 1979-04-23 to 1981-10-01 (NODC Accession 8200163)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Conductivity data were collected using moored current meter casts in the North Pacific Ocean from April 23, 1979 to October 1, 1981. Data were submitted by...

  3. Conductivity data from moored current meter casts in the North Pacific Ocean from 1980-08-05 to 1981-08-01 (NODC Accession 8300053)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Conductivity data were collected using moored current meter casts in the North Pacific Ocean from August 5, 1980 to August 1, 1981. Data were submitted by University...

  4. Temperature and conductivity data from moored current meter casts in the North Pacific Ocean from 1978-10-18 to 1980-08-01 (NODC Accession 8200188)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and conductivity data were collected using moored current meter casts in the North Pacific Ocean from October 18, 1978 to August 1, 1980. Data were...

  5. Moored current meter and wind recorder measurement near Point Conception, California: The 1983 OPUS Observations, from 1983-04-01 to 1983-07-29 (NODC Accession 8600041)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The OPUS (Organization of Persistent Upwelling Structures) program deployed two current meter (VMCM) moorings near Point Conception, California, during April - July...

  6. Current direction and wind data from moored current meter casts and other instruments in the Puget Sound during the Mesa Puget Sound/PSERP (MESA -PS) project, 1977-06-21 to 1977-09-25 (NODC Accession 7800257)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter and wind data were collected using moored current meter casts and other instruments in the Puget Sound from June 21, 1977 to September 25, 1977. Data...

  7. Data from moored current meters, temperature and salinity from a historical mooring placed in Hood Canal, Puget Sound, February - April 1980 (NODC Accession 0000680)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, current, and other data were collected from moored buoys in Hood Canal and the Puget Sound from 08 February 1980 to 10 April 1980. Data were collected by...

  8. Current components, physical, and other data from moored current meters and CTD casts from NOAA Ship McARTHUR and other platforms from 1983-10-04 to 1984-02-01 (NODC Accession 8500128)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current components, physical, and other data were collected by moored current meters and CTD casts from NOAA Ship McARTHUR and other platforms. Data were collected...

  9. Current direction, benthic organisms, temperature, and wind direction data from moored current meter casts in the Gulf of Mexico during the Brine Disposal project, 22 September 1977 - 30 November 1978 (NODC Accession 7900110)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, benthic organisms, temperature, and wind direction data were collected using moored current meter casts in the Gulf of Mexico from September 22,...

  10. Current direction, wind wave spectra, and CTD data from moored current meter and CTD casts in the North Atlantic Ocean from 1982-09-15 to 1983-09-15 (NODC Accession 8500148)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, wind wave spectra, and CTD data were collected using moored current meter and CTD casts in the Gulf of Mexico from September 3, 1982 to September...

  11. Current direction and CTD data from moored current meter and CTD casts in the Delaware Bay from 1984-01-01 to 1984-12-01 (NODC Accession 8600001)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction and CTD data were collected using moored current meter and CTD casts in the Delaware Bay from January 1, 1984 to December 1, 1985. Data were...

  12. Current direction and CTD data from moored current meter and CTD casts in the Atlantic Ocean from 1980-08-04 to 1981-08-14 (NODC Accession 8200240)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction and CTD data were collected using moored current meter and CTD casts in the Atlantic Ocean from August 4, 1980 to August 14, 1981. Data were...

  13. Current direction and CTD data from moored current meter and CTD casts in the North Pacific Ocean from 1979-02-05 to 1980-12-01 (NODC Accession 8300042)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction and CTD data were collected using moored current meter and CTD casts in the North Pacific Ocean from February 5, 1979 to December 1, 1980. Data...

  14. Current direction, chemical, phytoplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1977-11-21 to 1981-09-09 (NODC Accession 8200008)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, chemical, phytoplankton, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico...

  15. Current direction, temperature, and salinity data from moored current meter casts in the North Pacific Ocean from 1983-06-01 to 1983-08-01 (NODC Accession 8500147)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, temperature, and salinity data were collected using moored current meter casts in the North Pacific Ocean from June 1, 1983 to August 1, 1983....

  16. Current direction, chemical, zooplankton, phytoplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1980-01-24 to 1981-06-22 (NODC Accession 8100704)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, chemical, phytoplankton, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico...

  17. Current components, physical, and other data from moored current meters and CTD casts from NOAA Ship Discoverer and other platforms from the NE Pacific (limit-180) from 1994-04-22 to 1995-08-20 (NODC Accession 9500150)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current components, physical, and other data from moored current meters and CTD casts from NOAA Ship DISCOVERER and other platforms from the NE Pacific (limit-180)....

  18. Current direction, zooplankton, wind wave spectra, benthic organisms, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 18 October 1977 to 01 May 1979 (NODC Accession 7900270)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, zooplankton, benthic organisms, wind wave spectra, and other data were collected using moored current meter casts and other instruments in the...

  19. Current direction, chemical, phytoplankton, zooplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1977-09-15 to 1981-05-27 (NODC Accession 8100657)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, chemical, phytoplankton, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico...

  20. Current direction, benthic organisms, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1978-09-01 to 1982-05-19 (NODC Accession 8200154)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, benthic organisms, and other data were collected using moored current meter casts in the Gulf of Mexico from July 15, 1980 to March 20, 1981. Data...

  1. Current direction, chemical, zooplankton, phytoplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1981-03-24 to 1981-11-03 (NODC Accession 8200042)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, temperature, salinity, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from March 24,...

  2. Current direction, chemical, zooplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1978-09-22 to 1979-01-22 (NODC Accession 7900212)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, chemical, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from September...

  3. Current direction, zooplankton, phytoplankton, benthic organisms, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 17 February 1981 - 22 June 1982 (NODC Accession 8200230)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, phytoplankton, zooplankton, benthic organisms, and other data were collected using moored current meter casts and other instruments in the Gulf of...

  4. Current direction, chemical, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1980-12-13 to 1982-03-01 (NODC Accession 8200097)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, chemical, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from December 13, 1980 to...

  5. Current direction, chemical, benthic organisms, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1981-01-21 to 1982-07-27 (NODC Accession 8200207)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, chemical, benthic organisms, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from...

  6. Current components, physical, and other data from moored current meters and CTD casts from the ALPHA HELIX and other platforms from Gulf of Alaska from 1988-04-28 to 1988-06-29 (NODC Accession 8800237)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current components, physical, and other data were collected by moored current meters and CTD casts in the Gulf of Alaska from the ALPHA HELIX and other platforms....

  7. Current components, physical, and other data from moored current meters and CTD casts from NOAA Ship Discoverer and other platforms from the NE Pacific (limit-180) from 1993-08-18 to 1994-09-28 (NODC Accession 9500006)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current components, physical, and other data from moored current meters and CTD casts from NOAA Ship DISCOVERER and other platforms from the NE Pacific (limit-180)....

  8. Current direction, chemical, and marine toxic substances data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1978-09-09 to 1979-11-19 (NODC Accession 8000043)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, marine toxic substances, and chemical data were collected using moored current meter casts and other instruments in the Gulf of Mexico from...

  9. Current direction, benthic organisms, wind wave spectra, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1978-01-12 to 1980-06-01 (NODC Accession 8000465)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, benthic organisms, wind wave spectra, and other data were collected using moored current meter casts and other instruments from the CAPT JACK and...

  10. Current direction, wind wave spectra, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1978-10-11 to 1980-03-19 (NODC Accession 8000368)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, wind wave spectra, and other data were collected using moored current meter casts and other instruments from the CAPT JACK and EXCELLENCE in the...

  11. Current direction, chemical, zooplankton, phytoplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1982-02-19 to 1983-03-23 (NODC Accession 8300099)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, chemical, phytoplankton, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico...

  12. Current direction, phytoplankton, zooplankton, wind wave spectra, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1981-02-07 to 1982-11-01 (NODC Accession 8300055)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, phytoplankton, zooplankton, wind wave spectra, and other data were collected using moored current meter casts and other instruments in the Gulf of...

  13. Current direction, temperature, and salinity data from moored current meter casts in the Gulf of Mexico during the Brine Disposal project, 1983-08-31 to 1984-10-01 (NODC Accession 8500021)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, temperature, and salinity data were collected using moored current meter casts in the Gulf of Mexico from August 31, 1983 to October 1, 1984. Data...

  14. Current direction and wind wave spectra data from moored current meter casts in the Gulf of Mexico as part of the Brine Disposal project, 1978-06-28 to 1978-12-31 (NODC Accession 7900128)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, temperature, and wind wave spectra data were collected using moored current meter casts in the Gulf of Mexico from June 28, 1978 to December 31,...

  15. Current direction and wind wave spectra data from moored current meter casts in the Gulf of Mexico as part of the Brine Disposal project, 1977-12-22 to 1978-07-01 (NODC Accession 7900123)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, temperature, and wind wave spectra data were collected using moored current meter casts in the Gulf of Mexico from December 22, 1977 to October...

  16. Current direction, wind direction, temperature, and salinity data from moored current meter casts in the Gulf of Mexico during the Brine Disposal project, 01 February 1981 - 01 February 1981 (NODC Accession 8100516)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, temperature, wind direction, and salinity data were collected using moored current meter casts in the Gulf of Mexico from February 1, 1981 to...

  17. Current direction, chemical, zooplankton, phytoplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Buccaneer Oil Field project, 1975-12-12 to 1980-05-20 (NODC Accession 8000461)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from December 12, 1975 to...

  18. Current direction and wind wave spectra data from moored current meter casts in the Gulf of Mexico as part of the Brine Disposal project, 1977-02-02 to 1979-01-31 (NODC Accession 7900144)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, salinity, and wind wave spectra data were collected using moored current meter casts in the Gulf of Mexico from February 2, 1978 to January 31,...

  19. Current direction, temperature, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1977-09-14 to 1981-04-20 (NODC Accession 8100585)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, temperature, salinity, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from September...

  20. Current direction, wind wave spectra, phytoplankton, and other data from moored current meter casts in the Gulf of Mexico during the Brine Disposal project, 1977-09-24 to 1981-05-31 (NODC Accession 8100612)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, wind wave spectra, phytoplankton, temperature, salinity, and other data were collected using moored current meter casts in the Gulf of Mexico from...

  1. Current direction, temperature, and other data from moored current meter casts in the Gulf of Mexico during the Brine Disposal project, 1979-05-15 to 1980-03-22 (NODC Accession 8000457)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, salinity, current direction, and other data were collected using moored current meter casts from the EXCELLENCE in the Gulf of Mexico from May 15, 1979...

  2. Current direction, temperature, zooplankton, phytoplankton, and other data from moored current meter casts in the Gulf of Mexico during the Brine Disposal project, 1980-07-15 to 1981-03-20 (NODC Accession 8100610)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, temperature, salinity, and other data were collected using moored current meter casts in the Gulf of Mexico from July 15, 1980 to March 20, 1981....

  3. Current direction, temperature, salinity, and taxonomic code data from moored current meter casts in the Gulf of Mexico during the Brine Disposal project, 1979-08-18 to 1981-01-21 (NODC Accession 8100502)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, salinity, current direction, and taxonomic data were collected using moored current meter casts in the Gulf of Mexico from August 18, 1979 to January...

  4. Current direction, wind wave spectra, phytoplankton, zooplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1977-09-24 to 1981-08-31 (NODC Accession 8100681)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, chemical, phytoplankton, zooplankton, wind wave spectra, and other data were collected using moored current meter casts and other instruments in...

  5. Current direction, chemical, benthic organisms, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1980-03-10 to 1981-07-29 (NODC Accession 8100727)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, chemical, benthic organisms, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from March...

  6. Current meter data from moored current meter casts in the TOGA Area - Pacific (30 N to 30 S) as part of the Equatorial Pacific Ocean Climate Studies (EPOCS) project from 1984-04-16 to 1985-10-01 (NODC Accession 8700147)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the TOGA Area - Pacific (30 N to 30 S) from April 16, 1984 to October 1, 1985. Data were...

  7. Current meter data from moored current meter casts in the TOGA Area - Pacific (30 N to 30 S) as part of the Equatorial Pacific Ocean Climate Studies (EPOCS) project from 1987-05-01 to 1987-05-05 (NODC Accession 9000211)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the TOGA Area - Pacific (30 N to 30 S) from 01 May 1987 to 06 August 1988. Data were submitted...

  8. Current meter data from moored current meter casts in the SW Pacific (limit-147 E to 140 W) as part of the Equatorial Pacific Ocean Climate Studies (EPOCS) project from 1985-09-29 to 1986-04-01 (NODC Accession 8800136)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the SW Pacific (limit-147 E to 140 W) from September 29, 1985 to June 1, 1986. Data were...

  9. Current meter and pressure gauge data from moored current meter casts and other instruments in the Gulf of Alaska as part of the Fisheries-Oceanography Cooperative Investigations (FOCI) project, 1989-04-26 to 1989-09-26 (NODC Accession 9100068)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter and pressure gauge data were collected using moored current meter casts and other instruments in the Gulf of Alaska from April 22, 1989 to September...

  10. Current meter and marine toxic substances data from moored current meter casts and other instruments in the North Pacific Ocean as part of the Deep Ocean Mining and Environmental Study (DOMES) project, 1975-08-29 to 1977-12-01 (NODC Accession 7800741)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter and marine toxic substances data were collected using moored current meter casts and other instruments in the North Pacific Ocean from August 29, 1975...

  11. Current meter, phytoplankton, and wind data from moored current meter casts and other instruments in the North Pacific Ocean as part of the Deep Ocean Mining and Environmental Study (DOMES) project, 1975-08-29 to 1977-02-24 (NODC Accession 7700458)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter, phytoplankton, and wind data were collected using moored current meter casts and other instruments in the Gulf of Mexico from August 29, 1975 to...

  12. Current meter data from moored current meter casts in the Northwest Atlantic Ocean (limit-40 W) as part of the Outer Continental Shelf - Georges Bank (OCS -Georges Bank) project from 1980-10-27 to 1982-11-01 (NODC Accession 8600087)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Northwest Atlantic Ocean (limit-40 W) from November 27, 1980 to November 1, 1982. Data were...

  13. Current meter data from moored current meter casts in the Coastal Waters of SE Alaska/Brit.Colum. as part of the Long-Range Effects Program Puget Sound project from 1983-03-15 to 1983-11-01 (NODC Accession 8600321)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Coastal Waters of SE Alaska/Brit.Colum. from March 15, 1983 to November 1, 1983. Data were...

  14. Chemical, phytoplankton, zooplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1980-04-17 to 1981-07-17 (NODC Accession 8100731)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, chemical, phytoplankton, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico...

  15. Impact of recirculation on the East Greenland Current in Fram Strait: Results from moored current meter measurements between 1997 and 2009

    NARCIS (Netherlands)

    de Steur, L.; Hansen, E.; Mauritzen, C.; Beszczynska-Möller, A.; Fahrbach, E.

    2014-01-01

    Transports of total volume and water masses obtained from a mooring array in the East Greenland Current (EGC) in Fram Strait are presented for the period 1997–2009. The array in the EGC was moved along isobaths from 79°N to 78°50'N78°50'N in 2002 to line up with moorings in the eastern Fram Strait.

  16. Salinity and sigma-t data from moored current meter and CTD casts in the North Pacific Ocean from 1979-08-26 to 1982-06-07 (NODC Accession 8200146)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Salinity and sigma-t data were collected using moored current meter and CTD casts in the North Pacific Ocean from August 26, 1979 to June 7, 1982. Data were...

  17. Moored current meter data collected from the Bering Sea, Gulf of Alaska, and North Pacific Ocean in support of the Fisheries Oceanography Cooperative Investigations (FOCI) project, from 16 February 1994 to 25 May 2002 (NODC Accession 0001014)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Moored current meter data were collected from the Bering Sea, Gulf of Alaska, and North Pacific Ocean from February 16, 1994 to May 25, 2002. Data were collected by...

  18. Temperature, current meter, and other data from moored buoy as part of the GARP (Global Atmospheric Research Program) Atlantic Tropical Experiment (GATE) project, 15 July 1974 - 16 September 1974 (NODC Accession 7601674)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, current meter, and other data were collected using moored buoy from July 15, 1974 to September 16, 1974. Data were submitted by University of Rhode...

  19. Salinity, sigma-t, and temperature data from moored current meter and CTD casts in the North Atlantic Ocean from 1981-08-29 to 1981-12-07 (NODC Accession 8300048)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Salinity, sigma-t, and temperature data were collected using moored current meter and CTD casts in the North Atlantic Ocean from August 29, 1981 to December 7, 1981....

  20. Temperature profile data collected using current meter, mooring, thermistor casts from the Atlantic Ocean in part of the International Decade of Ocean Exploration / Mid-Ocean Dynamics Experiment from 11 March 1973 to 01 July 1973 (NODC Accession 7700106)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature data were collected using current meter, mooring, thermistor casts from March 11, 1973 to July 1, 1973. Data were submitted by Woods Hole Oceanographic...

  1. Chemical, phytoplankton, zooplankton, benthic organisms, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1981-02-12 to 1982-01-05 (NODC Accession 8200064)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Chemical, phytoplankton, benthic organisms, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico...

  2. Temperature and salinity data from moored current meter and bottle casts in the Gulf of Mexico as part of the Brine Disposal project, 1977-09-15 to 1977-12-19 (NODC Accession 7800318)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity data were collected using moored current meter and bottle casts in the Gulf of Mexico from September 15, 1977 to January 19, 1977. Data were...

  3. Water physics and chemistry data from moored current meter and bottle casts in the Northwest Atlantic Ocean as part of the North East Monitoring Program (NEMP) project, 1980-09-02 to 1980-09-06 (NODC Accession 8100628)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Northwest Atlantic Ocean from September 2, 1980 to September 6,...

  4. Chemical, zooplankton, and marine toxic substances data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1978-06-02 to 1979-06-02 (NODC Accession 8000002)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Chemical, zooplankton, and marine toxic substances data were collected using moored current meter casts and other instruments in the Gulf of Mexico from June 2, 1978...

  5. Chemical data from moored current meter, bottle casts, and other instruments in the Gulf of Mexico during the Brine Disposal project, 1978-06-23 to 1978-06-30 (NODC Accession 7900006)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Chemical data were collected using moored current meter, bottle casts, and other instruments in the Gulf of Mexico from June 18, 1978 to June 24, 1981. Data were...

  6. Chemical, benthic organisms, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Gulf of Mexico North Continental Slope Study (MNCSS) project, 11 November 1983 - 13 November 1984 (NODC Accession 8400119)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Chemical, benthic organisms, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from November 11, 1983 to...

  7. Temperature, wind direction, and salinity data from moored current meter casts in the Gulf of Mexico during the Brine Disposal project, 01 January 1981 - 01 January 1981 (NODC Accession 8100474)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, wind direction, and salinity data were collected using moored current meter casts in the Gulf of Mexico from January 1, 1981 to January 1, 1981. Data...

  8. Wind wave spectra and other data from moored current meter casts and other instruments in the Gulf of Mexico as part of the Brine Disposal project, 1979-09-22 to 1980-05-01 (NODC Accession 8000462)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Wind wave spectra and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from September 22, 1979 to May 1, 1980....

  9. Temperature, wind direction, and salinity data from moored current meter casts in the Gulf of Mexico during the Brine Disposal project, 01 December 1980 - 01 December 1980 (NODC Accession 8100457)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, wind direction, and salinity data were collected using moored current meter casts in the Gulf of Mexico from December 1, 1980 to December 1, 1980. Data...

  10. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 09 April 1979 - 23 August 1979 (NODC Accession 8100440)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from April 9, 1979 to August 23,...

  11. Water physics and chemistry data from moored current meter and bottle casts in the Northwest Atlantic Ocean as part of the North East Monitoring Program (NEMP) project, 1982-05-28 to 1982-06-04 (NODC Accession 8300008)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Northwest Atlantic Ocean from May 28, 1982 to June 4, 1982. Data...

  12. Chemical, zooplankton, phytoplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1981-02-17 to 1982-05-27 (NODC Accession 8200183)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Chemical, phytoplankton, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from February 17,...

  13. Chemical, benthic organisms, zooplankton, marine toxic substances, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1979-08-30 to 1981-09-21 (NODC Accession 8200012)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Chemical, marine toxic substances, benthic organisms, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf...

  14. Chemical, zooplankton, phytoplankton, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1982-09-07 to 1982-11-30 (NODC Accession 8300075)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Chemical, phytoplankton, zooplankton, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from September 7,...

  15. Water physics and chemistry data from moored current meter and bottle casts in the Gulf of Mexico as part of the Brine Disposal project, 1980-11-20 to 1981-03-16 (NODC Accession 8100530)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Gulf of Mexico from November 20, 1980 to March 16, 1981. Data were...

  16. Current meter and bathythermograph data from moored current meter and xbt casts in the North American Coastline-South as part of the Outer Continental Shelf - South Atlantic (OCS-South Atlantic) project from 1982-02-16 to 1985-07-01 (NODC Accession 8600124)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction and bathythermograph (xbt) data were collected using moored current meter casts and other instruments in the North American Coastline-South from...

  17. Current meter data from moored current meter casts in the TOGA Area - Pacific (30 N to 30 S) as part of the Equatorial Pacific Ocean Climate Studies (EPOCS) project from 1988-05-24 to 1989-05-26 (NODC Accession 9100207)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the TOGA Area - Pacific (30 N to 30 S) from 24 May 1988 to 26 May 1989. Data were submitted by...

  18. Current direction, bathythermograph (xbt), CTD, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Gulf of Mexico Physical Oceanography (GMPO) project, 1985-06-11 to 1986-09-03 (NODC Accession 8900186)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, bathythermograph (xbt), CTD, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from June...

  19. Current components, physical, and other data from moored current meters and CTD casts from the J. W. POWELL and other platforms from the Gulf of Mexico as part of the Texas-Louisiana Shelf Circulation and Transport Processes Study (LATEX PART A) from 17 March 1993 to 28 May 1993 (NODC Accession 9400043)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current components, physical, and other data were collected by moored current meters and CTD casts from the J. W. POWELL and other platforms from the Gulf of Mexico...

  20. Current components, water pressure, physical, and other data from moored current meters, pressure gauges, and CTD casts from CHARTER/FISHING BOATS and other platforms from the Bering Sea - Coastal Waters of Western Alaska and other locations from 1989-05-14 to 1989-10-06 (NODC Accession 9000278)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current components, water pressure, physical, and other data were collected from moored current meters, pressure gauges, and CTD casts from CHARTER/FISHING BOATS and...

  1. Current direction, bathythermograph (xbt), CTD, and other data from moored current meter casts and other instruments in the Coastal Waters of California as part of the North California Coastal Circulation Study (NCCCS) project, 1987-03-09 to 1989-11-01 (NODC Accession 9000209)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, bathythermograph (xbt), CTD, and other data were collected using moored current meter casts and other instruments in the Coastal Waters of...

  2. Current direction, bathythermograph (xbt), CTD, and other data from moored current meter casts and other instruments in the Northwest Atlantic Ocean (limit-40 W) and North American Coastline-South as part of the North Carolina FRontal Eddy Dynamics Experiment (FRED) project, 1987-05-07 to 1987-11-01 (NODC Accession 8900181)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, bathythermograph (xbt), CTD, and other data were collected using moored current meter casts and other instruments in the Northwest Atlantic Ocean...

  3. Current direction, bathythermograph (xbt), CTD, and other data from moored current meter casts and other instruments in the Gulf of Mexico as part of the Gulf of Mexico Physical Oceanography (GMPO) project, 1987-04-04 to 1988-11-02 (NODC Accession 8900259)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, bathythermograph (xbt), CTD, and other data were collected using moored current meter casts and other instruments in the Gulf of Mexico from April...

  4. Current direction and bathythermograph (xbt) data from moored current meter casts and other instruments in the Gulf of Mexico, Northwest Atlantic Ocean, and North American Coastline-South as part the North Carolina Frontal Eddy Dynamics Experiment (FRED) project, 1985-01-23 to 1987-01-31 (NODC Accession 8900214)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction and bathythermograph (xbt) data were collected using moored current meter casts and other instruments in the Gulf of Mexico, Northwest Atlantic...

  5. Current direction, chemical, benthic organisms, and wind wave spectra data from moored current meter casts and other instruments in the Gulf of Mexico as part of the Brine Disposal project, 1977-10-14 to 1979-08-24 (NODC Accession 7900335)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, chemical, benthic organisms, and wind direction data were collected using moored current meter casts and other instruments in the Gulf of Mexico...

  6. Current direction, marine toxic substances, and wind wave spectra data from moored current meter casts and other instruments in the Gulf of Mexico as part of the Brine Disposal project, 1977-09-15 to 1979-06-30 (NODC Accession 7900295)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, marine toxic substances, and wind wave spectra data were collected using moored current meter casts and other instruments in the Gulf of Mexico...

  7. Current direction, marine toxic substances, and wind wave spectra data from moored current meter casts and other instruments in the Gulf of Mexico as part of the Brine Disposal project, 1977-12-22 to 1979-09-30 (NODC Accession 7900336)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, marine toxic substances, and wind wave spectra data were collected using moored current meter casts and other instruments in the Gulf of Mexico...

  8. Current components, physical, and other data from moored current meters and CTD casts from NOAA Ship DISCOVERER and other platforms from the NE Pacific (limit-180) as part of the VENTS program from 1985-06-03 to 1991-06-11 (NODC Accession 9200073)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current components, physical, and other data from moored current meters and CTD casts from NOAA Ship DISCOVERER and other platforms from the NE Pacific (limit-180)....

  9. Current direction, bathythermograph (xbt), CTD, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Gulf of Mexico Physical Oceanography (GMPO) project, 1985-06-11 to 1986-09-03 (NODC Accession 8700196)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, bathythermograph (xbt), CTD, and other data were collected using moored current meter casts and other instruments in the Mid-Atlantic Bight and NW...

  10. Current direction, benthic organisms, zooplankton, chemical, toxis substances, and other data from moored current meter casts and other instruments in the Gulf of Mexico during the Brine Disposal project, 1981-03-24 to 1982-02-19 (NODC Accession 8200129)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, benthic organisms, zooplankton, chemical, toxic substances, and other data were collected using moored current meter casts and other instruments...

  11. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Marine EcoSystems Analysis - New York Bight (MESA - NYB) project, 1973-08-27 to 1974-11-27 (NODC Accession 7600777)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from August 27, 1973 to November 7,...

  12. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 1974-03-08 to 1974-05-13 (NODC Accession 7501210)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from March 8, 1974 to May 13, 1974....

  13. Chemical data from moored current meter, bottle casts, and other instruments in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 1978-05-18 to 1978-10-19 (NODC Accession 7900280)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Chemical data were collected using moored current meter, bottle casts, and other instruments in the Coastal Waters of New Jersey from May 18, 1978 to October 19,...

  14. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 1963-05-21 to 1975-07-08 (NODC Accession 7601561)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from May 21, 1963 to July 8, 1975....

  15. Chemical and bathythermograph data from moored current meter casts and other instruments from NOAA Ship Researcher and other platforms in the Gulf of Mexico with support from the Brine Disposal project, 1981-05-19 to 1983-04-12 (NODC Accession 8300152)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Chemical and bathythermograph data were collected using moored current meter casts and other instruments from NOAA Ship RESEARCHER and CAPT. BRADY J in the Gulf of...

  16. Water physics and chemistry data from moored current meter and bottle casts in the Coastal Waters of New Jersey as part of the Mesa New York Bight (MESA - NYB) project, 1975-01-15 to 1975-12-08 (NODC Accession 7700136)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physics and chemistry data were collected using moored current meter and bottle casts in the Coastal Waters of New Jersey from January 15, 1975 to December 8,...

  17. Total kinetic energy in four global eddying ocean circulation models and over 5000 current meter records

    KAUST Repository

    Scott, Robert B.; Arbic, Brian K.; Chassignet, Eric P.; Coward, Andrew C.; Maltrud, Mathew; Merryfield, William J.; Srinivasan, Ashwanth; Varghese, Anson

    2010-01-01

    We compare the total kinetic energy (TKE) in four global eddying ocean circulation simulations with a global dataset of over 5000, quality controlled, moored current meter records. At individual mooring sites, there was considerable scatter between

  18. Current meter data from moored current meter in the Gulf of Mexico as part of the Gulf of Mexico Physical Oceanography project from 1984-05-05 to 1989-05-18 (NCEI Accession 8900258)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data consists of Acoustic Doppler Current Profiles recorded in NODC'S F004 format. The data were collected using an Ametek-Straza instrument aboard the R/V CAPE...

  19. Eastward and northward components of ocean current and water temperature collected from moorings in the vicinity of Quinault Canyon in the North East Pacific Coast from 1979-04-28 to 1979-08-28 (NCEI Accession 0163893)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The University of Washington deployed 9 current meter moorings in the vicinity of Quinault Canyon. Of those 9 moorings, 6 moorings were recovered with useful data:...

  20. NODC Standard Format Current Meter (Components) (F015) Data (1962-1992) (NODC Accession 0066358)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains time series measurements of ocean currents. These data are obtained from current meter moorings and represent the Eulerian method of current...

  1. Temperature, current meter, and other data using current meter, thermistor, and mooring casts from the HUNT from the Pacific Ocean as part of the International Decade of Ocean Exploration / International Southern Ocean Studies / First Dynamic Response and Kinematics Experiment in the Drake Passage (IDOE/ISOS/FDRAKE) project, from 1982-06-28 to 1983-11-23 (NODC Accession 9500019)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, conductivity, east-west current component, north-south current component, depth, pressure, and salinity data were collected using current meter,...

  2. Squid based beam current meter

    International Nuclear Information System (INIS)

    Kuchnir, M.

    1983-01-01

    A SQUID based beam current meter has the capability of measuring the current of a beam with as little as 30 x 155 antiprotons (with a signal to noise ratio of 2). If low noise dc current is used to cancel most of the beam or an up-down counter is used to count auto-resets this sensitivity will be available at any time in the acumulation process. This current meter will therefore be a unique diagnostic tool for optimizing the performance of several Tev I components. Besides requiring liquid helium it seems that its only drawback is not to follow with the above sensitivity a sudden beam change larger than 16 μA, something that could be done using a second one in a less sensitive configuration

  3. Analysis and design of instrumented subsurface mooring

    Digital Repository Service at National Institute of Oceanography (India)

    SanilKumar, V.; Sakhardande, R.N.; Nayak, B.U.; Somanatha, G.S.

    current meter mooring. The results show that current force has more significant effect on the displacement compared to line tension. The point force due to waves or any other extraneous force has marked effect on the mooring line tension....

  4. Time-series current measurements, temperature, and salinity data from CTD, moored buoy, and current meter casts from the Norton Sound Alaska from 14 July 1985 to 22 July 1985 (NODC Accession 0000368)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Time-series current measurements, temperature, and salinity data were collected from fixed platforms at the Bering Sea - Norton Sound from July 14, 1985 to July 22,...

  5. Eastward and northward components of ocean current and water temperature collected from moorings in the vicinity of Quinault Canyon in the North East Pacific Coast from 1980-09-25 to 1981-01-24 (NCEI Accession 0164076)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The University of Washington maintained 9 current meter moorings, QC801 through QC8010 (QC806 was not deployed) in and around Quinault Canyon. Current meters were...

  6. Eastward and northward components of ocean current velocity and water temperature collected from moorings in the vicinity of Astoria Canyon in the North East Pacific Coast from 1978-01-14 to 1978-12-13 (NCEI Accession 0163612)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The University of Washington maintained 8 current meter moorings, AC781 through AC788 in and around Astoria Canyon. Current meters were a mix of Aanderaa (AA) and...

  7. Eastward and northward components of ocean current and water temperature collected from moorings in the vicinity of Astoria Canyon in the North East Pacific Coast from 1983-05-19 to 1983-09-22 (NCEI Accession 0164220)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The University of Washington deployed 7 current meter moorings, AC831 through AC837 in and around Astoria Canyon. Current meters were all Aanderaa (AA) instruments...

  8. Eastward and northward components of ocean current and water temperature collected from moorings in the vicinity of Quinault Canyon in the North East Pacific Coast from 1981-10-02 to 1982-01-19 (NCEI Accession 0164026)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The University of Washington maintained 5 current meter moorings, QC811 through QC815 in and around Quinault Canyon. Current meters were all Aanderaa (AA)...

  9. Current meter observations near the Sellafield pipeline, 1984-1986

    International Nuclear Information System (INIS)

    Jones, S.R.; Norris, S.

    1988-01-01

    Low-level liquid radioactive wastes are discharged into the north-east Irish Sea, under authorization, from the Sellafield reprocessing plant run by British Nuclear Fuels (BNFL). The effluent contains a range of radionuclides including caesium-137. The discharges are monitored and assessed by the Aquatic Environment Protection Division which is part of the Ministry of agriculture, Food and Fisheries. The results from the Sellafield current meter mooring in the Irish Sea from December 1983 to December 1986 are presented. The aim was to assess long-term tidal and residual current conditions under a variety of wind and current combinations as part of the assessment of the distribution of discharged radionuclides. The instrumentation is described briefly. Periods of data loss (due to meter failure or loss) and the data processing are explained. The results of the current metering are presented. (U.K.)

  10. Yearlong moored bioluminescence and current data at KM3NeT neutrino telescope sites in the deep Ionian Sea

    NARCIS (Netherlands)

    van Haren, H.; de Jong, M.; Kooijman, P.

    2015-01-01

    Yearlong observations are presented using stand-alone small optical sensors and current meters in the deep Ionian Sea, E-Mediterranean. At two future neutrino telescope sites, off Sicily (I) and off Peloponessos (Gr), we deployed 2500–3000 m long mooring lines with oceanographic instrumentation. At

  11. Current Mooring Design in Partner WECs and Candidates for Preliminary Analysis

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    This report is the combined report of Commercial Milestone "CM1: Design and Cost of Current Mooring Solutions of Partner WECs" and Milestone "M3: Mooring Solutions for Preliminary Analysis" of the EUDP project "Mooring Solutions for Large Wave Energy Converters". The report covers a description o...

  12. Mooring Motion Correction of SYNOP Central Array Current Meter Data

    Science.gov (United States)

    1992-01-01

    GRADUA’FE SCHOOL OF OCEANO (;RAPttY UNIVERSITY OF RHODE ISLAND NARRAGANSETT. HHIiODE ISLAND AD-A262 858 DTICIll 111’rijil ELECTE APR I2 1993 -U...8217 . -4 . A~~- - - - E~ ~ I j 4 1~.~ - ~ ~~~~ -j V QNN -14. C e t - - -. a* :~ tw- -*-- so Wf* op 1.t 11 -. - .0- - - - - - - - U 9o do 0 so sol 00 0-00

  13. Eastward and northward components of ocean current, water temperature, and others collected from moorings in North East Pacific Coast from 1977-10-07 to 1978-10-29 (NCEI Accession 0163986)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — As part of this project the University of Washington maintained 2 current meter moorings, Ocelot (OC) and Elephant (EL), from Oct. 1977 through Oct. 1978 across the...

  14. Eastward and northward components of ocean current and water temperature collected from moorings in North East Pacific Coast from 1972-01-05 to 1972-09-25 (NCEI Accession 0163797)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In 1972 the University of Washington maintained 2 current meter moorings, Inshore, (IN), and Offshore (OF) during January, July, and August 1972. In addition, a...

  15. First Year Observations of Antarctic Circumpolar Current Variability and Internal Wave Activity from the DIMES Mooring Array

    Science.gov (United States)

    Brearley, J. A.; Sheen, K. L.; Naveira-Garabato, A. C.

    2012-04-01

    A key component of DIMES (Diapycnal and Isopycnal Mixing Experiment in the Southern Ocean) is the deployment of a two-year cross-shaped mooring array in the Antarctic Circumpolar Current to the east of Drake Passage close to 57°W. Motivation for the cluster arises from the need to understand how eddies dissipate in the Southern Ocean, and specifically how much energy is extracted from the mesoscale by breaking internal waves, which in turn leads to turbulent mixing. The location of the mooring cluster was chosen to fulfil these objectives, being situated in a region of pronounced finestructure with high eddy kinetic energy and rough topography. The array, comprising 34 current meters and Microcats and a downward-looking ADCP, was first deployed in December 2009 and serviced in December 2010. Time series of current meter results from the most heavily-instrumented 'C' mooring indicate that a strong (up to 80 cms-1) surface-intensified north-eastward directed ACC occupies the region for most of the year, with over 85% of the variability in current speed being accounted for by equivalent barotropic fluctuations. A strong mean poleward heat flux is observed at the site, which compares favourably in magnitude with literature results from other ACC locations. Interestingly, four episodes of mid-depth (~2000 m) current speed maxima, each of a few days duration, were found during the 360-day time series, a situation also observed by the lowered ADCP during mooring servicing in December 2010. Early results indicate that these episodes, which coincide with time minima in stratification close to 2000 m, could profoundly influence the nature of eddy-internal wave interactions at these times. Quantification of the energy budget at the mooring cluster has been a key priority. When compared with previous moorings located in Drake Passage (Bryden, 1977), a near threefold-increase in mean eddy kinetic energy (EKE) is observed despite a small reduction in the mean kinetic energy

  16. Buoyancy package for self-contained acoustic doppler current profiler mooring

    Digital Repository Service at National Institute of Oceanography (India)

    Venkatesan, R.; Krishnakumar, V.

    A buoyancy package for self-contained Acoustic Doppler Current Profiler(SC-ADCP 1200 RD instruments USA) was designed and fabricated indigenously, for subsurface mooring in coastal waters. The system design is discussed. The design to keep SC...

  17. Real time Aanderaa current meter data collection system

    Digital Repository Service at National Institute of Oceanography (India)

    AshokKumar, K.; Diwan, S.G.

    Aanderaa current meters are widely used for recording the current speed and such other 4 parameters by deploying them over extended period of time. Normally data are recorded on magnetic tape and after recovery of current meters, data are read...

  18. Analysis of current meter records at the northwest atlantic 2800 metre radioactive waste dumpsite. Final report

    International Nuclear Information System (INIS)

    Hamilton, P.

    1982-01-01

    In August, 1976, four current meter arrays were deployed for a period of three months at the Atlantic 2800 meter radioactive waste disposal site as part of a scientific survey by the U.S. Environmental Protection Agency to assess the environmental conditions at this formerly used site. The disposal site is located on the Continental Rise and is centered at 38 deg 30' N, 72 deg 06' W. The four arrays were placed in a rectangle near the periphery of the site, each with a current meter 5.1 meters off the bottom, with an additional meter located 96 meters from the bottom at the southwest mooring. The principal findings included a 3-4 cm/s southwesterly mean current observed near the bottom. The low frequency part of the spectrum is explained as bottom trapped topographic Rossby waves. The high frequency motions are dominated by inertial oscillations with a maximum amplitude of about 10 cm/s. The potential for sediment transport during the measurement period is considered very small based on the observed current speeds

  19. Metering error quantification under voltage and current waveform distortion

    Science.gov (United States)

    Wang, Tao; Wang, Jia; Xie, Zhi; Zhang, Ran

    2017-09-01

    With integration of more and more renewable energies and distortion loads into power grid, the voltage and current waveform distortion results in metering error in the smart meters. Because of the negative effects on the metering accuracy and fairness, it is an important subject to study energy metering combined error. In this paper, after the comparing between metering theoretical value and real recorded value under different meter modes for linear and nonlinear loads, a quantification method of metering mode error is proposed under waveform distortion. Based on the metering and time-division multiplier principles, a quantification method of metering accuracy error is proposed also. Analyzing the mode error and accuracy error, a comprehensive error analysis method is presented which is suitable for new energy and nonlinear loads. The proposed method has been proved by simulation.

  20. Performance of a Tilt Current Meter in the Surf Zone

    DEFF Research Database (Denmark)

    Hansen, Asger Bendix; Carstensen, Stefan; Christensen, Drude Fritzbøger

    2017-01-01

    Tilt Current Meters (TCM’s) are relatively simple and inexpensive instruments for measuring currents in rivers and inthe sea. Their low cost and easy deployment means that a relatively large number of TCM’s can be deployed comparedto more conventional current meters such as Acoustic Doppler...

  1. Total kinetic energy in four global eddying ocean circulation models and over 5000 current meter records

    KAUST Repository

    Scott, Robert B.

    2010-01-01

    We compare the total kinetic energy (TKE) in four global eddying ocean circulation simulations with a global dataset of over 5000, quality controlled, moored current meter records. At individual mooring sites, there was considerable scatter between models and observations that was greater than estimated statistical uncertainty. Averaging over all current meter records in various depth ranges, all four models had mean TKE within a factor of two of observations above 3500. m, and within a factor of three below 3500. m. With the exception of observations between 20 and 100. m, the models tended to straddle the observations. However, individual models had clear biases. The free running (no data assimilation) model biases were largest below 2000. m. Idealized simulations revealed that the parameterized bottom boundary layer tidal currents were not likely the source of the problem, but that reducing quadratic bottom drag coefficient may improve the fit with deep observations. Data assimilation clearly improved the model-observation comparison, especially below 2000. m, despite assimilated data existing mostly above this depth and only south of 47°N. Different diagnostics revealed different aspects of the comparison, though in general the models appeared to be in an eddying-regime with TKE that compared reasonably well with observations. © 2010 Elsevier Ltd.

  2. Comparison between HF radar current data and moored ADCP currentmeter

    International Nuclear Information System (INIS)

    Cosoli, S.

    2005-01-01

    A preliminary assessment of accuracy of a two-sites shore-based HF Radar network along the Venice Lagoon littoral was attempted by means of comparison with a 57.5 day-long ADCP current time series for the period September-October 2002. Results showed that radar measurements were accurate ( O . The main differences between the HF radar and surface ADCP currents can be explained in terms of random errors affecting the measurement technique and the daily sea breeze forcing, since low-pass filtering of current time series significantly improved the correlation and decreased the RMS of the differences between the two measured data set. Comparison of the semidiurnal (M2, S2) tidal band suggested good agreement between tidal ellipse amplitudes. Wind forcing on a daily time-scale (sea-breeze) was associated with larger differences between radar and ADCP currents at a diurnal band due to the presence of a vertical shear in the surface layer

  3. Development and Testing of Infrared Water Current Meter | Ezenne ...

    African Journals Online (AJOL)

    Continuous monitoring of the river flow is essential for assessing water availability. River flow velocity is crucial to simulate discharge hydrographs of water in the hydrological system.This study developed a digital water current meter with infrared. The infrared current meter was tested using Ebonyi River at Obollo-Etiti and ...

  4. Eastward and northward components of ocean current and water temperature collected from moorings in the North East Pacific Coast from 1982-06-13 to 1982-06-23 (NCEI Accession 0164195)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The University of Washington maintained 6 current meter moorings, UPII-1, UPII-1 surface (UPII-1S), UPII-2, UPII-3, UPII-3 surface (UPII-3S), and UPII-5, from June...

  5. Eastward and northward components of ocean current and water temperature collected from moorings in North East Pacific Coast from 1981-08-18 to 1981-09-05 (NCEI Accession 0164211)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The University of Washington maintained 7 current meter moorings, UPI-1, UPI-1 surface (UPI-1S), UPI-2, UPI-3, UPI-3 surface (UPI-3S), UPI-4, UPI-5, from Aug. 18,...

  6. Fundamental Adriatic seiche recorded by current meters

    Directory of Open Access Journals (Sweden)

    N. Leder

    2004-04-01

    Full Text Available Currents recorded at two stations positioned at the Adriatic shelf break between 17 February and 6 March 1989 were considered. They provided the first evidence of current variability related to the Adriatic-wide seiches. Current spectra were dominated by a peak at 21.1h – a well-known period of the fundamental Adriatic mode. Amplitudes of oscillations were considerable, occasionally greater than 30cm/s. Both along- and cross-basin currents were recorded, thus signalling the importance of rotational effects. Comparison of the current data with the sea-level measurements performed simultaneously along the east Adriatic coast showed that the 21-h currents flowing in the Adriatic preceded sea levels by a quarter of a cycle, as would be expected from a simple model of bay seiches. Sea-level amplitudes reached 40cm in the North Adriatic, thus marking the event as one of the strongest on record. Seiching was triggered by a suddenly changing sirocco wind, as is usually the case in the Adriatic. The most important features of the seiche event were reproduced with a two-dimensional hydrodynamic model of the Adriatic Sea, forced by the sea-level residuals measured at Otranto and the air pressure and wind data recorded at Lastovo. The model showed that the seiche-related currents were relatively strong in the area where the current measurements were performed and further north – between Zadar and Ancona. Key words. Oceanography: general (continental shelf processes – Oceanography: physical (sea-level variations, currents

  7. Ocean Current Velocity Moored Time-Series Records, collected from moored Acoustic Doppler Current Profilers (ADCP) during 2011 near Grammanik Bank SPAG and Frenchcap Cay, USVI (NODC Accession 0088064)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Nortek 600kHz Aquadopp acoustic current profilers were deployed between April 2011 and September 2011 on shallow water moorings located on the coastal shelf south of...

  8. Assessment of Current State of Mooring Design in the Danish Wave Energy Sector

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    2015-01-01

    The mooring system is a vital part of any floating wave energy converter, both in terms of ensuring station keeping but also as it constitutes a significant share of the total cost. Motivatedby the considerable amount of failures due to insufficient mooring and the cost of mooring today, the pres...

  9. Data system for multiplexed water-current meters

    Science.gov (United States)

    Ramsey, C. R.

    1977-01-01

    Flow rates at 32 flood plain locations are measured simultaneously by single digital logic unit with high noise immunity. Water flowing through pygmy current meters rotates element that closes electrical contact once every resolution, so flow rate is measured by counting number of closures in time interval.

  10. Calibration of the BASS acoustic current meter with carrageenan agar

    Science.gov (United States)

    Morrison, A.T.; Williams, A.J.; Martini, M.

    1993-01-01

    The BASS current meter can measure currents down to the millimeter per second range. Due to the dependence of zero offset on pressure, determining a sensor referenced velocity requires accurate in situ zeroing of the meter. Previously, flow was restricted during calibration by placing plastic bags around the acoustic volume. In this paper, bacterial grade and carrageenan agars are used in the laboratory to create a zero flow condition during calibration and are shown to be acoustically transparent. Additionally, the results of open ocean and dockside carrageenan and plastic bag comparisons are presented. Carrageenan is shown to reliably provide a low noise, zero mean flow environment that is largely independent of ambient conditions. The improved zeros make millimeter per second accuracy possible under field conditions.

  11. LLNL current meter array--concept and system description

    Energy Technology Data Exchange (ETDEWEB)

    Mantrom, D.D. [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    A measurement capability using a horizontal array of 10 S4 current meters mounted on a stiff floating structure with 35 m aperture has been developed to support interpretation of radar imaging of surface effects associated with internal waves. This system has been fielded three times and most recently, has collected data alongside the sea-surface footprint of a land-fixed radar imaging ship-generated internal waves. The underlying need for this measurement capability is described. The specifications resulting from this need are presented and the engineering design and deployment procedures of the platform and systems that resulted are described The current meter data are multiplexed along with meteorological and system status data on board the floating platform and are telemetered to a shore station and on to a data acquisition system. The raw data are recorded, and are then processed to form space-time images of current and strain rate (a spatial derivative of the current field). Examples of raw and processed data associated with ship-generated internal waves are presented.

  12. Performance of Virtual Current Meters in Hydroelectric Turbine Intakes

    Energy Technology Data Exchange (ETDEWEB)

    Harding, Samuel F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States). Hydrology Group; Romero-Gomez, Pedro D. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States). Hydrology Group; Richmond, Marshall C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States). Hydrology Group

    2016-04-30

    Standards provide recommendations for the best practices in the installation of current meters for measuring fluid flow in closed conduits. These include PTC-18 and IEC-41 . Both of these standards refer to the requirements of the ISO Standard 3354 for cases where the velocity distribution is assumed to be regular and the flow steady. Due to the nature of the short converging intakes of Kaplan hydroturbines, these assumptions may be invalid if current meters are intended to be used to characterize turbine flows. In this study, we examine a combination of measurement guidelines from both ISO standards by means of virtual current meters (VCM) set up over a simulated hydroturbine flow field. To this purpose, a computational fluid dynamics (CFD) model was developed to model the velocity field of a short converging intake of the Ice Harbor Dam on the Snake River, in the State of Washington. The detailed geometry and resulting wake of the submersible traveling screen (STS) at the first gate slot was of particular interest in the development of the CFD model using a detached eddy simulation (DES) turbulence solution. An array of virtual point velocity measurements were extracted from the resulting velocity field to simulate VCM at two virtual measurement (VM) locations at different distances downstream of the STS. The discharge through each bay was calculated from the VM using the graphical integration solution to the velocity-area method. This method of representing practical velocimetry techniques in a numerical flow field has been successfully used in a range of marine and conventional hydropower applications. A sensitivity analysis was performed to observe the effect of the VCM array resolution on the discharge error. The downstream VM section required 11–33% less VCM in the array than the upstream VM location to achieve a given discharge error. In general, more instruments were required to quantify the discharge at high levels of accuracy when the STS was

  13. Seawater temperature and salinity observed from the CORC3 and CORC4 moorings in the southern California Current (NE Pacific) from 2012 to 2016 (NCEI Accession 0163206)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This archive accession contains temperature and salinity observations from instruments on the CORC3 and CORC4 moorings in the southern California Current, part of...

  14. Satellite Altimetry and Current-Meter Velocities in the Malvinas Current at 41°S: Comparisons and Modes of Variations

    Science.gov (United States)

    Ferrari, Ramiro; Artana, Camila; Saraceno, Martin; Piola, Alberto R.; Provost, Christine

    2017-12-01

    Three year long current-meter arrays were deployed in the Malvinas Current at 41°S below a satellite altimeter track at about 10 years intervals. Surface geostrophic velocities (SGV) derived from satellite altimetric data are compared with the in situ velocities at the upper current meter (˜300 m). Multisatellite gridded SGV compare better with in situ observations than along-track SGV. In spite of the proximity of the moorings to the complex Brazil-Malvinas Confluence (BMC) region, satellite SGV are significantly correlated with the 20 day low-passed in situ velocities (0.85 for along-isobaths velocities, 0.8 for cross-isobaths velocities). The recent in situ measurement period (2014-2015) stands out in the altimetry record with a long-lasting (4 months) high level of eddy kinetic energy at the mooring site and a southernmost location of the Subantarctic Front (SAF). The first two modes of variations of sea level anomaly (SLA) over the BMC remarkably match the first two modes of the low-passed in situ velocities. The first mode is associated with a latitudinal migration of the SAF, and the second with a longitudinal displacement of the Brazil Current overshoot. The two modes dominate the 24 year long record of SLA in the BMC, with energy peaks at the annual and semiannual periods for the first mode and at 3-5 months for the second mode. The SLA over the Southwest Atlantic was regressed onto the two confluence modes of SLA variations and showed remarkable standing wave train like structures in the Argentine Basin.

  15. Current Measurements and Overwash Monitoring Using Tilt Current Meters in Three Coastal Environments

    Science.gov (United States)

    Lowell, N. S.; Sherwood, C. R.; Decarlo, T. M.; Grant, J. R.

    2014-12-01

    Tilt Current Meters (TCMs) provide accurate, cost effective measurements of near-bottom current velocities. Many studies in coastal environments require current measurements, which are frequently made with Acoustic Doppler Profilers (ADPs). ADPs are expensive, however, and may not be suitable for locations where there is significant risk of damage, loss, or theft or where a large spatial array of measurements is required. TCMs, by contrast, are smaller, less expensive, and easier to deploy. This study tested TCMs in three sites to determine their suitability for use in research applications. TCMs are based on the drag-tilt principle, where the instrument tilts in response to current. The meter consists of a buoyant float with an onboard accelerometer, three-axis tilt sensor, three-axis magnetometer (compass), and a data logger. Current measurements are derived by post processing the tilt and compass values and converting them to velocity using empirical calibration data. Large data-storage capacity (4 GB) and low power requirements allow long deployments (many months) at high sample rates (16 Hz). We demonstrate the utility of TCM current measurements on a reef at Dongsha Atoll in the South China Sea, and in Vineyard Sound off Cape Cod, where the TCM performance was evaluated against ADP measurements. We have also used the TCM to record waves during an overwash event on a Cape Cod barrier beach during a winter storm. The TCM recorded waves as they came through the overwash channel, and the data were in agreement with the water-level record used as a reference. These tests demonstrate that TCMs may be used in a variety of near shore environments and have the potential to significantly increase the density of meters in future studies were current measurements are required.

  16. Current meter and temperature profile data from current meter and buoy casts in the TOGA area of Pacific Ocean from 27 April 1993 to 09 June 1994 (NODC Accession 9700042)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter and temperature profile data were collected using current meter and buoy casts in the TOGA area of Pacific Ocean from 27 April 1993 to 09 June 1994....

  17. Current meter and other data from current meter casts from NOAA Ship RESEARCHER in the North and South Pacific Ocean from 1984-06-28 to 1984-07-01 (NODC Accession 8500226)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter and other data were collected using current meter casts from NOAA Ship RESEARCHER in the North/South Pacific Ocean from June 28, 1984 to July 1, 1984....

  18. Current meter and temperature profile data from current meter and buoy casts in the TOGA area of Pacific Ocean from 29 March 1991 to 24 December 1993 (NODC Accession 9900057)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter and temperature profile data were collected using current meter and buoy casts in the TOGA area of Pacific Ocean from 29 March 1991 to 24 December...

  19. Singularities of construction of static war-hour meters alternating-current

    Directory of Open Access Journals (Sweden)

    М.О. Петрище

    2004-04-01

    Full Text Available  The analysis of construction of static war-hour meters is carried out which are founded on use of specialized tools, which are intended for measurement of a active energy. The shortages of such methods concerning a possibility of unauthorized takeoff of an electric energy are marked through improper phasing of a current. The method is offered which allows to construct static war-hour meters insensitive to improper phasing of a current.

  20. Experimental Investigation of the Performance of Tilt Current Meters in Wave-Dominated Flows

    DEFF Research Database (Denmark)

    Hansen, Asger Bendix; Carstensen, Stefan

    2017-01-01

    In recent years, tilt current meters (TCMs) have received renewed attention as they provide an inexpensive method for measuring currents in the coastal zone. However, previous studies focused mainly on current dominated flows or the current component of the flow. This study investigates the perfo...

  1. Currents, temperature, and salinity measurements for the Keweenaw Interdisciplinary Transport Experiment in Superior (KITES) project by the University of Washington/University of Minnesota in Lake Superior, 1998-2001 (NODC Accession 0001204)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data collection contains current meter data from 17 moorings in Lake Superior during the years 1998-2001. Each current meter is represented by a single data file.

  2. Extending and expanding the life of older current meters

    Science.gov (United States)

    Strahle, W.J.; Martini, Marinna A.

    1995-01-01

    The EG&G Model 610 VACM and Model 630 VMCM are standards for ocean current measurements. It is simple to add peripheral sensors to the data stream of the VACM by use of add-on CMOS circuitry. The firmware control of the VMCM makes it virtually impossible to add sampling of additional sensors. Most of the electronic components used in the VACM are obsolete or difficult to replace and the VMCM will soon follow suit. As a result, the USGS joined WHOI in the development of a PCMCIA data storage system to replace the cassette recording system in the VACM. Using the same PCMCIA recording package as the controller and recorder for the VMCM, a user-friendly VMCM is being designed. PCMCIA cards are rapidly becoming an industry standard with a wide range of storage capacities. By upgrading the VACM and VMCM to PCMCIA storage systems with a flexible microprocessor, they will continue to be viable instruments.

  3. Development and evaluation of an automated system for testing current meters

    Directory of Open Access Journals (Sweden)

    Ezequiel Saretta

    2016-02-01

    Full Text Available ABSTRACT Current meters are equipment widely used for estimating flow velocity in rivers and streams. Periodic calibrations of current meters are important to ensure the quality of measurements, but the required testing facilities are complex and only available in a few institutions. However, advances in electronics and automation may contribute to developing simple and reliable calibration systems. Thus, this study aimed to develop an automated system for testing current meters, which consisted of a trapezoidal channel, a step motor, a tow car and a management system, composed of a supervisory application and microprocessed modules to control the motor and the data acquisition. Evaluations of the displacement velocity showed that it matched the reference value up to 1.85 m s-1 for a vertical-axis current meter and 2.3 m s-1 for a horizontal-axis one. The developed system showed reliability during tests, for both current meter movement and data acquisition. The management of the system based on the developed modules and the supervisory application improved its user interface, turning all the procedure into a simple task.

  4. Immersed transient eddy current flow metering: a calibration-free velocity measurement technique for liquid metals

    Science.gov (United States)

    Krauter, N.; Stefani, F.

    2017-10-01

    Eddy current flow meters are widely used for measuring the flow velocity of electrically conducting fluids. Since the flow induced perturbations of a magnetic field depend both on the geometry and the conductivity of the fluid, extensive calibration is needed to get accurate results. Transient eddy current flow metering has been developed to overcome this problem. It relies on tracking the position of an impressed eddy current system that is moving with the same velocity as the conductive fluid. We present an immersed version of this measurement technique and demonstrate its viability by numerical simulations and a first experimental validation.

  5. Immersed transient eddy current flow metering: a calibration-free velocity measurement technique for liquid metals

    International Nuclear Information System (INIS)

    Krauter, N; Stefani, F

    2017-01-01

    Eddy current flow meters are widely used for measuring the flow velocity of electrically conducting fluids. Since the flow induced perturbations of a magnetic field depend both on the geometry and the conductivity of the fluid, extensive calibration is needed to get accurate results. Transient eddy current flow metering has been developed to overcome this problem. It relies on tracking the position of an impressed eddy current system that is moving with the same velocity as the conductive fluid. We present an immersed version of this measurement technique and demonstrate its viability by numerical simulations and a first experimental validation. (paper)

  6. DETERMINATION OF HYDRAULIC TURBINE EFFICIENCY BY MEANS OF THE CURRENT METER METHOD

    Directory of Open Access Journals (Sweden)

    PURECE C.

    2016-12-01

    Full Text Available The paper presents methodology used for determining the efficiency of a low head Kaplan hydraulic turbine with short converging intake. The measurement method used was the current meters method, the only measurement method recommended by the IEC 41standard for flow measurement in this case. The paper also presents the methodology used for measuring the flow by means of the current meters method and the various procedures for calculating the flow. In the last part the paper presents the flow measurements carried out on the Fughiu HPP hydraulic turbines for determining the actual operating efficiency.

  7. Design of optoelectronic system to meter of electrical current to the habitation house

    International Nuclear Information System (INIS)

    Camas, J.; Flores, M.; Anzuelo, G.; Garcia, C.; Juarez, N.; Torres, W.; Mota, R.

    2009-01-01

    In this work, we present an optoelectronic digital meter of electrical current. The development of this design is described step by step with diagram to blocks. The advantage over conventional meters of CFE (Comision Federal de electricidad) and the design proposed are analyzed. Information in the optoelectronic design is controlled by Microcontroller PIC16F877. This Microcontroller uses an external crystal as an oscillator with a 4 MHz frequency. The information is shown in a LCD (Liquid Crystal Display). In addition, to quantify the electrical current was necessary an interruption of light. (Author)

  8. Currents, Temperature, Salinity, and Sea Ice measurements from moorings in Barrow Canyon, Chukchi Sea, 2010-2015 (NCEI Accession 0160090)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — From August 2010 – September 2012, six moorings (BC1 inshore to BC6 offshore), spaced ~13 km apart, spanned the head of Barrow Canyon, Chukchi Sea, Alaska. Each...

  9. Eddy-current flow rate meter for measuring sodium flow rates

    International Nuclear Information System (INIS)

    Knaak, J.

    1976-01-01

    For safety reasons flow rate meters for monitoring coolant flow rates are inserted in the core of sodium-cooled fast breeder reactors. These are so-called eddy-current flow rate meters which can be mounted directly above the fuel elements. In the present contribution the principle of measurement, the mechanical construction and the circuit design of the flow rate measuring device are described. Special problems and their solution on developing the measuring system are pointed out. Finally, results of measurement and experience with the apparatus in several experiments are reported, where also further possibilities of application were tested. (orig./TK) [de

  10. NOAA/EcoFOCI Chukchi Sea mooring time-series data, stations C1, C2, and C3, 2010-08-29 to 2012-08-21, including currents, temperature, salinity, oxygen, chlorophyll a, and nitrate data (NCEI Accession 0157701)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These EcoFOCI mooring time-series datasets consist of RCM-9 current data, Ecofluorometer, Seacat and nitrate data from moored instruments at 3 stations in the...

  11. Near-surface current meter array measurements of internal gravity waves

    Energy Technology Data Exchange (ETDEWEB)

    Jones, H.B.E. [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    We have developed various processing algorithms used to estimate the wave forms produced by hydrodynamic Internal Waves. Furthermore, the estimated Internal Waves are used to calculate the Modulation Transfer Function (MTF) which relates the current and strain rate subsurface fields to surface scattering phenomenon imaged by radar. Following a brief discussion of LLNL`s measurement platform (a 10 sensor current meter array) we described the generation of representative current and strain rate space-time images from measured or simulated data. Then, we present how our simulation capability highlighted limitations in estimating strain rate. These limitations spurred the application of beamforming techniques to enhance our estimates, albeit at the expense of collapsing our space-time images to 1-D estimates. Finally, we discuss progress with regard to processing the current meter array data captured during the recent Loch Linnhe field trials.

  12. Seawater temperature and salinity observed from the CORC1 and CORC2 moorings in the southern California Current (NE Pacific) from 2008-09-20 to 2012-11-14 (NCEI Accession 0137858)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity observations from instruments on the CORC1 and CORC2 moorings in the southern California Current, part of the CORC project (Consortium on...

  13. Temperature and current data collected as part of the CLIvar MOde Water Dynamic Experiment (CLIMODE) mooring data from 2005-11 to 2007-11 in the North Atlantic, south-east of the Gulf Stream (NCEI Accession 0127259)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Two years of temperature, salinity, current, and nutrient data were collected on four subsurface moorings as part of a two-year field component of the CLIMODE...

  14. Spectra of currents and temperature off Godavari (east coast of India)

    Digital Repository Service at National Institute of Oceanography (India)

    Sarma, M.S.S; Rao, L.V.G.

    Time series data of currents and temperature obtained from a mooring of current meters off Godavari (East Coast of India) during September 1980 are analysed to study the space scales of semidiurnal and internal oscillations in the range of buoyancy...

  15. Meeting current requirements. Data security in the smart metering; Den heutigen Anforderungen gerecht werden. Datensicherheit im Smart Metering

    Energy Technology Data Exchange (ETDEWEB)

    Zayer, Peter [VOLTARIS GmbH, Maxdorf (Germany); Wolf, Frank [VOLTARIS GmbH, Merzig (Germany)

    2012-09-15

    The requirements for the smart metering are extremely complex. On the one hand, the network operators and the suppliers need unadulterated data on consumption or supply. On the other hand, consumers see their privacy jeopardized because the individual user behavior can be read from the specific energy profile. Furthermore, according to the will of the legislator the smart meter or the measuring system is an active component of a smart grid and smart-market system. Right here it is important to eliminate the threat of hacker attacks. For the industry this results in the task of guaranteeing both the maximum data security as well as to provide a maximum nutritive value to the customer.

  16. Field intercomparison of three current meters in an environment free from high frequency motion

    Science.gov (United States)

    Larouche, Pierre; Deguise, Jean-Claude

    1989-06-01

    An intercomparison of three different types of current meter was performed in an Arctic environment where wave action was absent, permitting the evaluation of the instruments under natural conditions of weak currents and cold water. The instruments were an Aanderaa RCMS4S, an Inter Ocean S4 and an EG&G-Neil Brown Smart Acoustic Current Meter (SACM). The S4 and the SACM both showed their ability to measure very small currents as opposed to the RCM4S which is limited by a mechanical rotor threshold. The agreement of the direction was better between the RCM4S and the SACM than between the RCM4S and the S4. Due to the misalignment of the Aanderaa vane in very weak currents, direction differences between the instruments of either pair can, however, reach 180°. The misalignment also shields the Aanderaa rotor leading to underestimation of current speed. The threshold for a good speed reading for the Aanderaa can be put conservatively at 5 cm s -1. Above this value, the RCM4S over-responded compared to both the S4 and the SACM. The source of that problem seems to be related to different calibrations of the instruments. Finally a power spectrum analysis showed that the RCM4S, when not influenced by wave action, can produce a measure of the energy as good as that of a vector averaging instrument.

  17. Eastward and northward components of ocean current velocity collected from moorings in North East Pacific Coast from 1967-09-01 to 1969-10-16 (NCEI Accession 0163399)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The University of Washington recovered 8 current meters, B,C,N,O,S,V,Z,AA deployed on the continental shelf off the Washington coast. Current meters used were...

  18. Response of surface buoy moorings in steady and wave flows

    Digital Repository Service at National Institute of Oceanography (India)

    Anand, N.M.; Nayak, B.U.; SanilKumar, V.

    A numerical model has been developed to evaluate the dynamics of surface buoy mooring systems under wave and current loading. System tension response and variation of tension in the mooring line at various depths have been evaluated for deep water...

  19. Current components data from current meters from the NE Pacific (limit-180) from 1954-06-01 to 1970-06-01 (NODC Accession 7601441)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current components data were collected from current meters in the NE Pacific (limit-180). Data were collected by the Japanese Hydrographic Office from 01 June 1954...

  20. Technical Study on Improvement of Endurance Capability of Limit Short-circuit Current of Charge Control SMART Meter

    Science.gov (United States)

    Li, W. W.; Du, Z. Z.; Yuan, R. m.; Xiong, D. Z.; Shi, E. W.; Lu, G. N.; Dai, Z. Y.; Chen, X. Q.; Jiang, Z. Y.; Lv, Y. G.

    2017-10-01

    Smart meter represents the development direction of energy-saving smart grid in the future. The load switch, one of the core parts of smart meter, should be of high reliability, safety and endurance capability of limit short-circuit current. For this reason, this paper discusses the quick simulation of relationship between attraction and counterforce of load switch without iteration, establishes dual response surface model of attraction and counterforce and optimizes the design scheme of load switch for charge control smart meter, thus increasing electromagnetic attraction and spring counterforce. In this way, this paper puts forward a method to improve the withstand capacity of limit short-circuit current.

  1. First results of Indian - Current meter moorings along The equator: Vertical current structure variability at equator, 93 degrees E during February-December, 2000

    Digital Repository Service at National Institute of Oceanography (India)

    Murty, V.S.N.; Suryanarayana, A.; Sarma, M.S.S.; Tilvi, V.; Fernando, V.; Nampoothiri, G.; Sardar, A.; Gracias, D.; Khalap, S.

    forcing while the 30-50 day ISO with Madden-Julian Oscillations. The energy spectrum at 280 m shows relatively higher energy than that at 135 m at 10-20 day ISO; while cross-spectra of kinetic energy at these depths reveal high coherence and upward phase...

  2. Basin Testing of Wave Energy Converters in Trondheim: Investigation of Mooring Loads and Implications for Wider Research

    Directory of Open Access Journals (Sweden)

    Vladimir Krivtsov

    2014-04-01

    Full Text Available This paper describes the physical model testing of an array of wave energy devices undertaken in the NTNU (Norwegian University of Science and Technology Trondheim basin between 8 and 20 October 2008 funded under the EU Hydralabs III initiative, and provides an analysis of the extreme mooring loads. Tests were completed at 1/20 scale on a single oscillating water column device and on close-packed arrays of three and five devices following calibration of instrumentation and the wave and current test environment. One wave energy converter (WEC was fully instrumented with mooring line load cells, optical motion tracker and accelerometers and tested in regular waves, short- and long-crested irregular waves and current. The wave and current test regimes were measured by six wave probes and a current meter. Arrays of three and five similar WECs, with identical mooring systems, were tested under similar environmental loading with partial monitoring of mooring forces and motions. The majority of loads on the mooring lines appeared to be broadly consistent with both logistic and normal distribution; whilst the right tail appeared to conform to the extreme value distribution. Comparison of the loads at different configurations of WEC arrays suggests that the results are broadly consistent with the hypothesis that the mooring loads should differ. In particular; the results from the tests in short crested seas conditions give an indication that peak loads in a multi WEC array may be considerably higher than in 1-WEC configuration. The test campaign has contributed essential data to the development of Simulink™ and Orcaflex™ models of devices, which include mooring system interactions, and data have also been obtained for inter-tank comparisons, studies of scale effects and validation of mooring system numerical models. It is hoped that this paper will help to draw the attention of a wider scientific community to the dataset freely available from the

  3. WATER TEMPERATURE, CONDUCTIVITY, and others collected from MOORINGS in Norwegian Sea from 2010-07-01 to 2012-09-23 (NCEI Accession 0156420)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A mooring was deployed at a depth of 3100 meters in the Lofoten Basin of the Nordic Seas with the aim of measuring water properties and currents over a two-year...

  4. Comparison of acoustic doppler current profiler and Price AA mechanical current meter measurements made during the 2011 Mississippi River Flood

    Science.gov (United States)

    O'Brien, Patrick; Mueller, David; Pratt, Thad

    2012-01-01

    The Mississippi River and Tributaries project performed as designed during the historic 2011 Mississippi River flood, with many of the operational decisions based on discharge targets as opposed to stage. Measurement of discharge at the Tarbert Landing, Mississippi range provides critical information used in operational decisions for the floodways located in Louisiana. Historically, discharge measurements have been made using a Price AA current meter and the mid-section method, and a long record exists based on these types of measurements, including historical peak discharges. Discharge measurements made using an acoustic Doppler current profiler from a moving boat have been incorporated into the record since the mid 1990's, and are used along with the Price AA mid-section measurements. During the 2011 flood event, both methods were used and appeared to provide different results at times. The apparent differences between the measurement techniques are due to complex hydrodynamics at this location that created large spatial and temporal fluctuations in the flow. The data and analysis presented herein show the difference between the two methods to be within the expected accuracy of the measurements when the measurements are made concurrently. The observed fluctuations prevent valid comparisons of data collected sequentially or even with different observation durations.

  5. Current speed and direction, temperature and salinity collected from Moored Buoy in Davis Strait from 1987-09-05 to 1990-09-06 (NCEI Accession 0129882)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Volume, freshwater and heat transport through Davis Strait, the northern boundary of the Labrador Basin, were computed using a mooring array deployed for three...

  6. Current meter components, physical, and other data from current meters and CTD casts from NOAA Ship RONALD H. BROWN and other platforms as part of the VENTS program from 1996-06-14 to 1997-10-05 (NODC Accession 9800031)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components and physical data were collected from current meters and CTD casts from NOAA Ship RONALD H. BROWN and other platforms from 14 June 1996 to...

  7. Relation of sortable silt grain-size to deep-sea current speeds: Calibration of the 'Mud Current Meter'

    Science.gov (United States)

    McCave, I. N.; Thornalley, D. J. R.; Hall, I. R.

    2017-09-01

    Fine grain-size parameters have been used for inference of palaeoflow speeds of near-bottom currents in the deep-sea. The basic idea stems from observations of varying sediment size parameters on a continental margin with a gradient from slower flow speeds at shallower depths to faster at deeper. In the deep-sea, size-sorting occurs during deposition after benthic storm resuspension events. At flow speeds below 10-15 cm s-1 mean grain-size in the terrigenous non-cohesive 'sortable silt' range (denoted by SS bar , mean of 10-63 μm) is controlled by selective deposition, whereas above that range removal of finer material by winnowing is also argued to play a role. A calibration of the SS bar grain-size flow speed proxy based on sediment samples taken adjacent to sites of long-term current meters set within 100 m of the sea bed for more than a year is presented here. Grain-size has been measured by either Sedigraph or Coulter Counter, in some cases both, between which there is an excellent correlation for SS bar (r = 0.96). Size-speed data indicate calibration relationships with an overall sensitivity of 1.36 ± 0.19 cm s-1/μm. A calibration line comprising 12 points including 9 from the Iceland overflow region is well defined, but at least two other smaller groups (Weddell/Scotia Sea and NW Atlantic continental rise/Rockall Trough) are fitted by sub-parallel lines with a smaller constant. This suggests a possible influence of the calibre of material supplied to the site of deposition (not the initial source supply) which, if depleted in very coarse silt (31-63 μm), would limit SS bar to smaller values for a given speed than with a broader size-spectrum supply. Local calibrations, or a core-top grain-size and local flow speed, are thus necessary to infer absolute speeds from grain-size. The trend of the calibrations diverges markedly from the slope of experimental critical erosion and deposition flow speeds versus grain-size, making it unlikely that the SS bar (or

  8. Improving H-Q rating curves in temprorary streams by using Acoustic Doppler Current meters

    Science.gov (United States)

    Marchand, P.; Salles, C.; Rodier, C.; Hernandez, F.; Gayrard, E.; Tournoud, M.-G.

    2012-04-01

    Intermittent rivers pose different challenges to stream rating due to high spatial and temporal gradients. Long dry periods, cut by short duration flush flood events explain the difficulty to obtain reliable discharge data, for low flows as well as for floods: problems occur with standard gauging, zero flow period, etc. Our study aims to test the use of an acoustic Doppler currentmeter (ADC) for improving stream rating curves in small catchments subject to large variations of discharge, solid transport and high eutrophication levels. The study is conducted at the outlet of the river Vène, a small coastal river (67 km2) located close to the city of Montpellier (France). The low flow period lasts for more than 6 month; during this period the river flow is sustained by effluents from urban sewage systems, which allows development of algae and macrophytes in the riverbed. The ADC device (Sontek ®Argonaut SW) is a pulsed Doppler current profiling system designed for measuring water velocity profiles and levels that are used to compute volumetric flow rates. It is designed for shallow waters (less than 4 meter depth). Its main advantages are its low cost and high accuracy (±1% of the measured velocity or ±0.05 m/sec, as reported by the manufacturer). The study will evaluate the improvement in rating curves in an intermittent flow context and the effect of differences in sensitivity between low and high water level, by comparing mean flow velocity obtained by ADC to direct discharges measurements. The study will also report long-term use of ADC device, by considering effects of biofilms, algae and macrophytes, as well as solid transport on the accuracy of the measurements. In conclusion, we show the possibility to improve stream rating and continuous data collection of an intermittent river by using a ADC with some precautions.

  9. CURRENT DIRECTION, cloud amount/frequency and other data from SCANDIA, MAKEDA and other platforms in the Coral Sea from 1959-09-17 to 1972-12-30 (NODC Accession 7700278)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data consists of Moored Current Meters deployed by the Australian ship STRADBROOKE over Moreton Bay, Coral sea. Project was supported by Council of Scientific...

  10. Advanced Metering Infrastructure based on Smart Meters

    Science.gov (United States)

    Suzuki, Hiroshi

    By specifically designating penetrations rates of advanced meters and communication technologies, devices and systems, this paper introduces that the penetration of advanced metering is important for the future development of electric power system infrastructure. It examines the state of the technology and the economical benefits of advanced metering. One result of the survey is that advanced metering currently has a penetration of about six percent of total installed electric meters in the United States. Applications to the infrastructure differ by type of organization. Being integrated with emerging communication technologies, smart meters enable several kinds of features such as, not only automatic meter reading but also distribution management control, outage management, remote switching, etc.

  11. OCGen Module Mooring Project

    Energy Technology Data Exchange (ETDEWEB)

    McEntee, Jarlath [Ocean Renewable Power Company, LLC, Portland, ME (United States)

    2015-02-06

    Ocean Renewable Power Company's OCGen Module Mooring Project provided an extensive research, design, development, testing and data collection effort and analysis conducted with respect to a positively buoyant, submerged MHK device secured to the seabed using a tensioned mooring system. Different analytic tools were evaluated for their utility in the design of submerged systems and their moorings. Deployment and testing of a prototype OCGen® system provided significant data related to mooring line loads and system attitude and station keeping. Mooring line loads were measured in situ and reported against flow speeds. The Project made a significant step in the development of designs, methodologies and practices related to floating and mooring of marine hydrokinetic (MHK) devices. Importantly for Ocean Renewable Power Company, the Project provided a sound basis for advancing a technically and commercially viable OCGen® Power System. The OCGen® Power System is unique in the MHK industry and, in itself, offers distinct advantages of MHK devices that are secured to the seabed using fixed structural frames. Foremost among these advantages are capital and operating cost reductions and increased power extraction by allowing the device to be placed at the most energetic level of the water column.

  12. Current meter and other data collected using current meter casts from R/V RESEARCHER and R/V CALANUS in the Atlantic and Pacific Ocean as part of the Eastern Pacific Ocean Circulation Study (EPOCS) and Subtropical Atlantic Current Study (STACS), 23 March 1983 - 19 November 1986 (NODC Accession 8700226)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter and other data were collected using current meter casts from R/V RESEARCHER and R/V CALANUS in the Atlantic and Pacific Ocean from March 23, 1983 to...

  13. Systematic analysis on mooring systems of floating structures; Futai keiryuho ni kansuru keitoteki kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, K; Suzuki, H; Ide, T [The University of Tokyo, Tokyo (Japan)

    1997-12-31

    Discussed herein are mooring performance requirements of the new types of marine structures now proposed, and characteristic ranges and future expansion potential of the existing mooring systems. The mooring systems studied for floating structures are catenary, single point (multi-leg and single-leg types), fixed structure with fender and tension leg mooring systems. The studied items include extraction of the elements that constitute rigidity of the spring for horizontal mooring, survey on and data collection for each element, determination of element ranges, programs for mooring analysis, assessment of mooring characteristic ranges, and potential development of the characteristic ranges. It is concluded that the existing systems with their current characteristic ranges and future possibility are insufficient for the future marine structures. It is therefore necessary to develop new mooring concepts, instead of expanding the current concepts, in order to meet the mooring performance requirements for the new marine structures. 14 refs., 9 figs., 11 tabs.

  14. Systematic analysis on mooring systems of floating structures; Futai keiryuho ni kansuru keitoteki kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, K.; Suzuki, H.; Ide, T. [The University of Tokyo, Tokyo (Japan)

    1996-12-31

    Discussed herein are mooring performance requirements of the new types of marine structures now proposed, and characteristic ranges and future expansion potential of the existing mooring systems. The mooring systems studied for floating structures are catenary, single point (multi-leg and single-leg types), fixed structure with fender and tension leg mooring systems. The studied items include extraction of the elements that constitute rigidity of the spring for horizontal mooring, survey on and data collection for each element, determination of element ranges, programs for mooring analysis, assessment of mooring characteristic ranges, and potential development of the characteristic ranges. It is concluded that the existing systems with their current characteristic ranges and future possibility are insufficient for the future marine structures. It is therefore necessary to develop new mooring concepts, instead of expanding the current concepts, in order to meet the mooring performance requirements for the new marine structures. 14 refs., 9 figs., 11 tabs.

  15. Electromagnetic Flow Meter Having a Driver Circuit Including a Current Transducer

    Science.gov (United States)

    Karon, David M. (Inventor); Cushing, Vincent (Inventor); Patel, Sandeep K. (Inventor)

    2014-01-01

    An electromagnetic flow meter (EMFM) accurately measures both the complete flow rate and the dynamically fluctuating flow rate of a fluid by applying a unipolar DC voltage to excitation coils for a predetermined period of time, measuring the electric potential at a pair of electrodes, determining a complete flow rate and independently measuring the dynamic flow rate during the "on" cycle of the DC excitation, and correcting the measurements for errors resulting from galvanic drift and other effects on the electric potential. The EMFM can also correct for effects from the excitation circuit induced during operation of the EMFM.

  16. Currents, temperature, conductivity, and sigma-theta data collected from moored instruments deployed from the platform ARGO MAINE in the Stellwagen Bank National Marine Sanctuary in support of Massachusetts Bay Internal Wave Experiment between August 4, 1998 and September 2, 1998 (NODC Accession 0061443)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A 1-month 4-element moored array experiment to measure the currents associated with large-amplitude internal waves generated by tidal flow across Stellwagen Bank.

  17. Nuclear electronic equipment for control and monitoring boards. Specifications and test methods of direct current period meters

    International Nuclear Information System (INIS)

    Roquefort, Henri; Chapelot; Ramard; Tardif; Tournier; Vaux

    1973-11-01

    After a few words of introduction, mention of the main notations used and the definition of certain terms, the field of application of the document is outlined and a list of references given. The main specifications of electronic 'direct current period meter' subassemblies for the monitoring, control and safety of nuclear reactors are then defined and the corresponding test methods described. The apparatus measures on a logarithmic scale the neutron fluence rate of a reactor by means of an ionisation chamber and supplies 'period' data relative to the fluence rate variation in time. The specifications and test methods are given for the different components: logarithmic amplifier, time derivative unit, threshold releases, high tension supply for ionisation chamber, auxiliary circuits and finally the complete period meter. (author) [fr

  18. NODC Standard Product: Texas-Louisiana Shelf Circulation and Transport Processes Study: Current Meter, Meteorological Buoy, XBT/XSV/XCP/CTD/IES (NODC Accession 9700319)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This package contains current direction/velocity, water temperature, air temperature, salinity, and other data which were collected using current meter, CTD casts,...

  19. Interview with David Moore

    Science.gov (United States)

    Rossman, Allan; Dietz, E. Jacquelin; Moor, David

    2013-01-01

    David Moore is Professor Emeritus of Statistics at Purdue University. He served as the first President of the International Association for Statistical Education (IASE) from 1993-1995 and as President of the American Statistical Association (ASA) in 1998. He is a Fellow of the ASA and of the IMS and was awarded the ASA's Founders Award in…

  20. Modeling and managing urban water demand through smart meters: Benefits and challenges from current research and emerging trends

    Science.gov (United States)

    Cominola, A.; Giuliani, M.; Castelletti, A.; Piga, D.; Rizzoli, A. E.

    2015-12-01

    Urban population growth, climate and land use change are expected to boost residential water demand in urban contexts in the next decades. In such a context, developing suitable demand-side management strategies is essential to meet future water demands, pursue water savings, and reduce the costs for water utilities. Yet, the effectiveness of water demand management strategies (WDMS) relies on our understanding of water consumers' behavior, their consumption habits, and the water use drivers. While low spatial and temporal resolution water consumption data, as traditionally gathered for billing purposes, hardly support this understanding, the advent of high-resolution, smart metering technologies allowed for quasi real-time monitoring water consumption at the single household level. This, in turn, is advancing our ability in characterizing consumers' behavior, modeling, and designing user-oriented residential water demand management strategies. Several water smart metering programs have been rolled-out in the last two decades worldwide, addressing one or more of the following water demand management phases: (i) data gathering, (ii) water end-uses characterization, (iii) user modeling, (iv) design and implementation of personalized WDMS. Moreover, the number of research studies in this domain is quickly increasing and big economic investments are currently being devoted worldwide to smart metering programs. With this work, we contribute the first comprehensive review of more than 100 experiences in the field of residential water demand modeling and management, and we propose a general framework for their classification. We revise consolidated practices, identify emerging trends and highlight the challenges and opportunities for future developments given by the use of smart meters advancing residential water demand management. Our analysis of the status quo of smart urban water demand management research and market constitutes a structured collection of information

  1. TIDAL TURBULENCE SPECTRA FROM A COMPLIANT MOORING

    Energy Technology Data Exchange (ETDEWEB)

    Thomson, Jim; Kilcher, Levi; Richmond, Marshall C.; Talbert, Joe; deKlerk, Alex; Polagye, Brian; Guerra, Maricarmen; Cienfuegos, Rodrigo

    2013-06-13

    A compliant mooring to collect high frequency turbulence data at a tidal energy site is evaluated in a series of short demon- stration deployments. The Tidal Turbulence Mooring (TTM) improves upon recent bottom-mounted approaches by suspend- ing Acoustic Doppler Velocimeters (ADVs) at mid-water depths (which are more relevant to tidal turbines). The ADV turbulence data are superior to Acoustic Doppler Current Profiler (ADCP) data, but are subject to motion contamination when suspended on a mooring in strong currents. In this demonstration, passive stabilization is shown to be sufficient for acquiring bulk statistics of the turbulence, without motion correction. With motion cor- rection (post-processing), data quality is further improved; the relative merits of direct and spectral motion correction are dis- cussed.

  2. Eastward and northward components of ocean current and water temperature collected from moorings in North East Pacific Coast from 1973-01-05 to 1974-02-23 (NCEI Accession 0163985)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The University of Washington maintained moorings off the coast of Washington as part of the Continental Shelf Experiment 1973-74. Moorings were kept out for longer...

  3. Skill Testing a Three-Dimensional Global Tide Model to Historical Current Meter Records

    Science.gov (United States)

    2013-12-17

    breaking internal gravity waves generated over rough topography. The strength of the globally averaged wave drag is tuned to minimize the RMS...Ross Sea SO 02 39 83 Drake Passage SO 03 15 30 Weddell Sea SO 04 45 127 Antarctic Circumpolar Current SP 01 19 49 East Auckland Current SP 02 28 75 East

  4. CRED Recording Current Meter (RCM); AMSM, TUT; Long: -170.75830, Lat: -14.37498 (WGS84); Sensor Depth: 22.00m; Data Range: 20020303-20040224.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Recording Current Meters (RCM) provide a time series of water...

  5. Current meter components and other data from FIXED PLATFORMS from the Chinhae Bay (Korea) from 1982-06-15 to 1982-07-01 (NODC Accession 9000178)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from FIXED PLATFORMS in the Chinhae Bay (Korea) from 15 June 1982 to 01 July 1982. Data were collected by the Korean...

  6. Current meter components and other data from FIXED PLATFORMS from Yellow Sea (Hwang Hai) from 10 January 1986 to 30 June 1986 (NODC Accession 8800190)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from FIXED PLATFORMS in the Yellow Sea (Hwang Hai) from 10 January 1986 to 30 June 1986. Data were collected by Florida...

  7. Current meter - direction and other data from FIXED PLATFORMS from 1972-06-27 to 1972-10-10 (NODC Accession 7500581)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter - direction and other data were collected from FIXED PLATFORMS. Data were collected by the National Ocean Service (NOS) from 27 June 1972 to 10 October...

  8. Current meter and other data from FIXED PLATFORMS from East China Sea (Tung Hai) from 1980-06-02 to 1981-11-18 (NODC Accession 8700250)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected from FIXED PLATFORMS in the East China Sea (Tung Hai) from 02 June 1980 to 18 November 1981. Data were collected by the Pacific...

  9. Current meter and other data parameters collected FIXED PLATFORMS from 1984 to 2001 to define net circulation through the Florida Keys (NODC Accession 0000582)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current, wind, and temperature data were collected in the Florida Keys passages from FIXED PLATFORMS using meters for direct observations. Data were collected by the...

  10. Current meter components and other data from FIXED PLATFORMS from Coastal Waters of California from 1988-04-27 to 1989-06-01 (NODC Accession 9000294)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from FIXED PLATFORMS in the Coastal Waters of California from 27 April 1988 to 01 June 1989. Data were collected by the...

  11. CRED Recording Current Meter (RCM); PRIA, KIN; Long: -162.35925, Lat: 06.38263 (WGS84); Sensor Depth: 7.60m; Data Range: 20020318-20040402.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Recording Current Meters (RCM) provide a time series of water...

  12. Current meter components and other data from FIXED PLATFORMS from the North Atlantic Ocean and others locations from 09 January 1977 to 01 July 1983 (NODC Accession 8600153)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from FIXED PLATFORMS from the North Atlantic Ocean and others locations from 09 January 1977 to 01 July 1983. Data were...

  13. Current meter components and other data from FIXED PLATFORMS from 1977-11-09 to 1990-02-20 (NODC Accession 9300129)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from FIXED PLATFORMS from 09 November 1977 to 20 February 1990. Data were collected by the Maritime Safety Agency;...

  14. Physical and other data from CTD casts, current meters, and other instruments from 01 January 1990 to 31 December 1990 (NODC Accession 9300092)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — hysical and other data were collected from CTD casts, current meters, and other instruments. Data were collected by the Japanese Hydrographic Office from 01 January...

  15. Physical and other data from CTD casts, current meters, and other instruments from 01 January 1989 to 31 December 1989 (NODC Accession 9100163)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical and other data were collected from CTD casts, current meters, and other instruments. Data were collected by the Japanese Hydrographic Office from 01 January...

  16. Charlotte Moore Sitterly

    Science.gov (United States)

    Rubin, Vera C.

    2010-07-01

    Charlotte Moore Sitterly was a scientist in an era when it was rare for a woman to have the opportunity to devote her life to forefront science. Following her graduation from Swarthmore College in 1920, she accepted a position at Princeton University as an assistant to Henry Norris Russell. In 1925 she started a study of the solar spectrum. She could then not know that she would devote much of her scientific career to gathering basic atomic data that are invaluable to the scientific community, even today. In 1931 she obtained a Ph.D. degree at the University of California, Berkeley, and returned to Princeton as a staff member of the Princeton University Observatory. In 1945 Moore moved to the National Bureau of Standards (NBS), to supervise preparation of the widely-used tables of atomic energy levels. Following the successful launching (1946) of a V2 rocket to obtain the ultraviolet spectrum of the Sun, she started working also with Richard Tousey and his group at the Naval Research Laboratory (NRL). Ultimately, they extended the solar spectrum down to 2200 angstroms. She continued her affiliations with both the NBS and the NRL until her death in 1990. Charlotte Moore was a rare scientist who devoted her career to obtaining accurate numbers, thus enabling the scientific community to open her tables and know that the data are reliable.

  17. The Howe Sound current metering program volumes I, II, and III data reports from A. P. KNIGHT in the Coastal Waters of British Columbia from 1971-11-01 to 1974-02-01 (NCEI Accession 7700091)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data and some temperature and salinity data were collected as part of the Howe Sound Current Metering Program Data during November 16, 1971 - February...

  18. Wind direction/velocity and current direction/velocity data from current meter casts in a world wide distribution from 1970-12-06 to 1991-10-01 (NODC Accession 9700218)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Wind direction/velocity and current direction/velocity data were collected using current meter casts in a world wide distribution from December 6, 1970 to October 1,...

  19. Physical, current, and other data from CTD and current meters from FIXED PLATFORMS in the southeast Bering Sea as part of Fisheries-Oceanography Cooperative Investigations (FOCI) from 05 May 1995 to 24 February 1998 (NODC Accession 0000642)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, current, and other data were collected from CTD and current meters attached to FIXED PLATFORMS in the southeast Bering Sea from 05 May 1995 to 24 February...

  20. The variability and forcing of currents within a frontal region off the northeast coast of England

    Science.gov (United States)

    Gmitrowicz, E. M.; Brown, J.

    1993-08-01

    During the summer of 1988 a collaborative experiment between the Ministry of Agriculture, Fisheries and Food (MAFF), the Proudman Oceanographic Laboratory (POL) and University College North Wales (UCNW) was undertaken to study the dynamics of a near-shore frontal region off the northeast coast of England. The experiment is one of the most intensive studies of the current structure of a shelf sea front undertaken. Currents were measured using an ocean surface current RADAR (OSCR), ship-borne ADCP, Lagrangian drifters and moored current meters. The current meter moorings held conventional meters at mid-depth and near the bed and S4 electromagnetic current meters near the surface. The mean, low frequency (Continental Shelf Research, 1, 191-207) with some deviations due to nearshore effects.

  1. Extending the Capabilities of the Mooring Analysis Program: A Survey of Dynamic Mooring Line Theories for Integration into FAST: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Masciola, M.; Jonkman, J.; Robertson, A.

    2014-03-01

    Techniques to model dynamic mooring lines come in various forms. The most widely used models include either a heuristic representation of the physics (such as a Lumped-Mass, LM, system), a Finite-Element Analysis (FEA) discretization of the lines (discretized in space), or a Finite-Difference (FD) model (which is discretized in both space and time). In this paper, we explore the features of the various models, weigh the advantages of each, and propose a plan for implementing one dynamic mooring line model into the open-source Mooring Analysis Program (MAP). MAP is currently used as a module for the FAST offshore wind turbine computer-aided engineering (CAE) tool to model mooring systems quasi-statically, although dynamic mooring capabilities are desired. Based on the exploration in this manuscript, the lumped-mass representation is selected for implementation in MAP based on its simplicity, computational cost, and ability to provide similar physics captured by higher-order models.

  2. Patrick Moore the autobiography

    CERN Document Server

    Moore, Patrick

    2011-01-01

    Throughout his distinguished career, Patrick Moore has, without a doubt, done more to raise the profile of astronomy among the British public than any other figure in the scientific world. As the presenter of The Sky at Night on BBC television for nearly 50 years he was honored with an OBE in 1968 and a CBE in 1988. In 2001 he was knighted 'for services to the popularisation of science and to broadcasting'. The BBC first aired The Sky at Night in April 1957 and it is now in the record books as the world's longest running TV series with the same presenter. He is also the author of over 60

  3. Circulation in the eastern North Pacific: results from a current meter array along 152°W

    Science.gov (United States)

    Hall, Melinda M.; Niiler, Pearn P.; Schmitz, William J.

    1997-07-01

    Data from four, 2-3 year long current meter records, at 28°N, 35°N, 39°N and 42°N, along 152°W in the eastern North Pacific, are used to describe the variability found in mesoscale period ( 200 days) motions. Energy in the mesoscale energy band of 40-200 day periodicity is found in the upper ocean at each location, generally decreasing to the north and with depth. The long period flow is not coherent among these locations. Record length mean velocities at 3-4 separate depths were used to provide estimates of reference level velocities for vertical profiles of geostrophic currents derived from historical hydrographic data. The vertical profile of measured east-west vertical shear agrees well with the geostrophically computed value; the north-south measured vertical shear is not in as good agreement. Assuming a vorticity balance of fwz= βv, and with w( z=0) as the Ekman pumping, the vertical velocity profiles were also calculated at 28°N and 42dgN. Using these three-dimensional referenced vertical profiles of mean currents, an examination of the mean advection of density in the thermocline revealed significant residuals in the net three-dimensional advection of density (or heat and salt) above 850 m at 28°N and above 240 m at 42°N. These results are relatively independent of the reference level velocities.

  4. Hourly Variation in the Flow Measurements in the Jesus Maria Watershed with the Cup-type Current Meter Method

    Directory of Open Access Journals (Sweden)

    José Pablo Bonilla Valverde

    2017-12-01

    Full Text Available Conducting punctual gauging measurements in Costa Rica constitutes a common practice for the evaluation of water resources for drinking water supply.  The country has a database composed of punctual measurements made in most of the rivers of Costa Rica with almost forty years of information. Within this database, a single data (punctual gauging is used to characterize the whole month in which it was gauged. In order to corroborate the validity of this characterization, punctual gauging was performed every hour to confirm that the hourly variation is minimal.  The hourly gauging was carried out during the flow measurement campaign in the Jesus Maria watershed conducted on April 9th and 10th, 2013.  The flow measurements were performed using cup-type current meter method according to the ISO 2537: 2007 standard.  One third of the measurements showed less than ±1% variation and more than three quarters were in the range of ±5% variation. In all cases, excluding the lower basin of the Jesus Maria River, variations in the measurements are less than 10% relative to the median.  It is concluded that the hour variation is relatively small, and therefore, the database is validated – for the months at the end of the dry season.  This experience should be repeated in the same basin at other times of the year and on other basins to ensure that the temporal variability do not represent large differences in the flow.

  5. Current components, physical, ocean circulation, wind circulation, and other data from moored buoys, CTD casts, drifting buoys, and in situ wind recorders from AIRCRAFT and other platforms from the North Atlantic Ocean and other locations as part of the Seasonal Response of the Equatorial Atlantic Experiment/Français Océan et Climat dans l'Atlantique Equatorial (SEQUAL/FOCAL) project from 1980-01-25 to 1985-12-18 (NODC Accession 8700111)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current components, physical, ocean circulation, wind circulation, and other data were collected from moored buoys, CTD casts, drifting buoys, and in situ wind...

  6. Diurnal and semi-diurnal tidal currents in the deep mid-Arabian sea

    Digital Repository Service at National Institute of Oceanography (India)

    Shenoi, S.S.C.; Gouveia, A.D.; Shetye, S.R.

    Current meter records from two depths, approximately 1000 m, at three mooring in the deep mid-Arabian Sea were used to study tidal components. Tidal ellipses for the semi-diurnal (M2, S2 and K2) and the diurnal (K1 and P1) tidal constituents have...

  7. Eastward and northward components of ocean current, temperature, salinity and ice analysis collected from industry sponsored moorings in the Chukchi Sea, Alaska from 2008-09-08 to 2016-10-13 (NCEI Accession 0164964)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Thirteen moorings sites throughout the northeastern Chukchi Sea shelf were occupied in various combinations for eight field years, 2008-2016. Two separate taut line...

  8. Currents, temperature, conductivity, attenuation, and sigma-theta data from moorings deployed off the coast of Orange County, CA from platforms ROBERT GORDON SPROUL and YELLOWFIN from June 13, 2001 to January 22, 2003 (NODC Accession 0067572)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A large number of moorings were deployed in the summer of 2001 off Huntington Beach CA to monitor coastal ocean process that transport suspended material across the...

  9. Moored ADCP current data from deployment 2 of the Multi-disciplinary Ocean Sensors for Environmental Analyses and Networks (MOSEAN) project north of Hawaii 2004-2005 (NODC Accession 0116094)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — ADCP data were collected by sensors from seven deployments within 2004-2007 on the HALE-ALOHA mooring, a location about 100 km north of Oahu, Hawaii, USA. The...

  10. Currents, temperature, conductivity, attenuation, and sigma-theta data from moorings deployed off the coast of Palos Verdes, CA from platforms VICKERS and ROBERT GORDON SPROUL from May 21, 1992 and March 30, 1993 (NODC Accession 0067573)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The sediments on the shelf off Palos Verdes CA are contaminated with large amounts of DDT. Moorings were deployed on the shelf in the winter of 1993 in part to...

  11. Temperature and conductivity, and water currents data collected by CTDs and current meters on moored buoys in the Sermilik Fjord, Greenland from 2010-08 to 2011-08 (NODC Accession 0123282)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data included in this dataset were collected in Sermilik Fjord, located in East Greenland in the Ammassalik district close to the town of Tasiilaq. Data...

  12. Time series current meter and other data from moorings in the North Atlantic in support of the Current and Sediment Transport in Buzzards Bay Field program from 05 July 1982 to 05 December 1985 (NODC Accession 0056730)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A field experiment designed to determine the near-bottom circulation in Buzzards Bay and the transport of fine-grained sediments. The transport of fine-grained...

  13. Data collected by current-and-pressure-recording inverted echo sounders (CPIES) and current meter moorings in Drake Passage as part of cDrake from November 2007 to December 2011 (NCEI Accession 0121256)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains measurements collected in Drake Passage between November 2007 and December 2011 as part of the cDrake progam funded by the National Science...

  14. Water Temperature, conductivity, and currents data collected by CTDs and current meters on moored buoys in the Sermilik Fjord, Greenland from 2012-09-18 to 2013-08-20 (NCEI Accession 0127325)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data included in this dataset were collected in the Sermilik Fjord, located in East Greenland in the Ammassalik district close to the town of Tasiilaq. Data...

  15. Temperature, conductivity, and water currents data collected by CTDs and current meters on moored buoys in the Sermilik Fjord, Greenland from 2011-08-20 to 2012-09-16 (NODC Accession 0126772)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data included in this dataset were collected in the Sermilik Fjord, located in East Greenland in the Ammassalik district close to the town of Tasiilaq. Data...

  16. Moored offshore structures - evaluation of forces in elastic mooring lines

    Science.gov (United States)

    Crudu, L.; Obreja, D. C.; Marcu, O.

    2016-08-01

    In most situations, the high frequency motions of the floating structure induce important effects in the mooring lines which affect also the motions of the structure. The experience accumulated during systematic experimental tests and calculations, carried out for different moored floating structures, showed a complex influence of various parameters on the dynamic effects. Therefore, it was considered that a systematic investigation is necessary. Due to the complexity of hydrodynamics aspects of offshore structures behaviour, experimental tests are practically compulsory in order to be able to properly evaluate and then to validate their behaviour in real sea. Moreover the necessity to carry out hydrodynamic tests is often required by customers, classification societies and other regulatory bodies. Consequently, the correct simulation of physical properties of the complex scaled models becomes a very important issue. The paper is investigating such kind of problems identifying the possible simplification, generating different approaches. One of the bases of the evaluation has been found consideringtheresults of systematic experimental tests on the dynamic behaviour of a mooring chain reproduced at five different scales. Dynamic effects as well as the influences of the elasticity simulation for 5 different scales are evaluated together. The paper presents systematic diagrams and practical results for a typical moored floating structure operating as pipe layer based on motion evaluations and accelerations in waves.

  17. Selection and optimization of mooring cables on floating platform for special purposes

    Science.gov (United States)

    Ma, Guang-ying; Yao, Yun-long; Zhao, Chen-yao

    2017-08-01

    This paper studied a new type of assembled marine floating platform for special purposes. The selection and optimization of mooring cables on the floating platform are studied. By using ANSYS AQWA software, the hydrodynamic model of the platform was established to calculate the time history response of the platform motion under complex water environments, such as wind, wave, current and mooring. On this basis, motion response and cable tension were calculated with different cable mooring states under the designed environmental load. Finally, the best mooring scheme to meet the cable strength requirements was proposed, which can lower the motion amplitude of the platform effectively.

  18. Method to moor an offshore operating vessel

    Energy Technology Data Exchange (ETDEWEB)

    Flory, J.F.

    1983-01-24

    A vessel such as a storage vessel is permanently moored, by means such as a yoke pivoted on the forecastle of the vessel, to a mooring leg, e.g. a riser or anchor chain, which is attached to a base located on the ocean floor. Mounted on the vessel is tension exsisting means, for example, counterweights, springs, winches, or the like, operably connected with the mooring leg for applying tension thereto such as by lifting the yoke. The top of the mooring leg is connected to the end of the yoke through a mooring swivel and a gimbaled mooring table or a universal joint. A fluid swivel may be located above the mooring table or about a load-carrying shaft connected to the mooring leg. 8 drawings.

  19. A new device for monitoring moorings

    Digital Repository Service at National Institute of Oceanography (India)

    Namboothiri, E.G.; Krishnakumar, V.

    A new device - Mooring Monitoring Unit (MMU), which consists of an inwater unit and a deck unit has been designed to monitor mooring in situ. This device helps tracing underwater moorings, once its marker buoy is removed either by accident or theft...

  20. Charge Meter

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 19; Issue 4. Charge Meter: Easy Way to Measure Charge and Capacitance: Some Interesting Electrostatic Experiments. M K Raghavendra V Venkataraman. Classroom Volume 19 Issue 4 April 2014 pp 376-390 ...

  1. Development of moored oceanographic spectroradiometer

    Science.gov (United States)

    Booth, Charles R.; Mitchell, B. Greg; Holm-Hansen, O.

    1987-01-01

    Biospherical Instruments has successfully completed a NASA sponsored SBIR (Small Business Innovational Research Program) project to develop spectroradiometers capable of being deployed in the ocean for long periods of time. The completion of this project adds a valuable tool for the calibration of future spaceborne ocean color sensors and enables oceanographers to extend remote sensing optical techniques beyond the intermittent coverage of spaceborne sensors. Highlights of the project include two moorings totalling 8 months generating extensive sets of optical, biological, and physical data sets in the ocean off La Jolla, California, and a 70 day operational deployment of the resulting commercial product by the ONR and NASA sponsored BIOWATT program. Based on experience gained in these moorings, Biospherical Instruments has developed a new line of spectroradiometers designed to support the oceanographic remote sensing missions of NASA, the Navy, and various oceanographers.

  2. Arctic Ice Dynamics Joint Experiment (AIDJEX) 1975-1976, Physical Oceanography Data Report Profiling Current Meter Data -- Camp Caribou. Volume 1.

    Science.gov (United States)

    1980-02-01

    base of the ice. Hourly averages pertaining to the fixed-mast current meters can be obtained through the National Oceano - graphic Data Center. The...431 441 451 461 471 481 49t 50 40 ’II 421 431 441 󈧷j 461 4󈨋 481 491 Sol , 71ME :N :AYs Fig’ure 11. Speed and direction plotted for the manned AIDJEX...EDDIES Swift mesoscale undercurrents are one of the most notable oceano - graphic features observed in the AIDJEX area of the Arctic Ocean. The eddy form

  3. Portable wireless metering

    Energy Technology Data Exchange (ETDEWEB)

    DiPaola, L [Powtel Monitoring Systems, Inc., Ajax, ON (Canada)

    1996-12-31

    Portable meters were discussed as alternatives to standard billing meters for temporary installations. Current, voltage and power factor at a distribution station were measured to calculate kW and kVAR, using an easy to install product that communicates live readings directly to the existing billing system. A background of situations where temporary metering is a possible alternative to regular meters was presented. Use of electronic, clamp on Electronic Recording Ammeters (ERA) and their drawbacks were discussed. An improved temporary metering solution using FM radio transmission to deliver live data to a receiving device, the Eagle Series 3500, was introduced. Improvements over previous ERA systems were discussed, including accuracy, lack of batteries, immediate confirmation of functionality, current, voltage and power factor monitoring, direct feed to billing system, line crew savings, need for only a single unit at any given site, bi-directional power flow metering, independent report storage media, and a portable voltage and P.F. diagnostic tool. Details of trial applications at the Utopia distribution station west of Barrie, ON were presented. This technology was said to be still in the testing stage, but its flexibility and economy were sonsidered to be very promising for future application.

  4. Moorings: Indian Ocean Creolizations

    Directory of Open Access Journals (Sweden)

    Francoise Verges

    2012-06-01

    Full Text Available In this essay written in 2004, Françoise Vergès and Carpanin Marimoutou explore the ways in which processes and practices of creolization occurred in Réunion Island. They argue that creolization must be analyzed within the historical, political and cultural context in which they emerge. Vergès and Marimoutou reflect on these processes -- frictions, conflicts, and exchanges among slaves, settlers, migrants, and indentured workers from Madagascar, Mozambique, Gujarat, Bengal, France, Tamil Nadu, Southern China, Malaysia, Vietnam..., who were brought or came on the uninhabited island, colonized by the French in the 17th century. The authors also looked at the post-colonial moment, the French policies of assimilation and repression in the 1960s-1970s. For them, vernacular cultural practices and memories of struggle continue to work as counter strategies against local and national reactionary politics. In their conclusion, Vergès and Marimoutou look at the current form of globalization and its consequences on processes of creolization.

  5. Current meter components and other data from FIXED PLATFORMS in support of the Physical Oceanography Field Program Offshore North Carolina from 1992-02-22 to 1993-02-18 (NODC Accession 9300089)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from FIXED PLATFORMS from 22 February 1992 to 18 February 1993. Data were collected by the Science Applications, Inc....

  6. CTD, current meter, meteorological buoy, and bottle data from the Gulf of Mexico from the ALPHA HELIX and other platforms in support of LATEX A from 18 March 1993 to 23 September 1993 (NODC Accession 9400149)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CTD, current meter, meteorological buoy, and bottle data were collected from the Gulf of Mexico from the ALPHA HELIX and other platforms. Data were collected by...

  7. Physical, taxonomic code, and other data from current meter and other instruments in New York Bight from DOLPHIN and other platforms; 14 March 1971 to 03 August 1975 (NODC Accession 7601385)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, taxonomic code, and other data were collected using current meter and other instruments from DOLPHIN and other platforms in New York Bight. Data were...

  8. Current meter components and other data from FIXED PLATFORMS from Gulf of Guinea and other locations as part of the Equatorial Pacific Ocean Climate Studies (EPOCS) and other projects from 08 July 1976 to 01 April 1982 (NODC Accession 9000067)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from FIXED PLATFORMS in the Gulf of Guinea and other locations from 08 July 1976 to 01 April 1982. Data were collected...

  9. Wind and temperature data from current meter in the TOGA - Pacific Ocean (30 N to 30 S) as part of the Equatorial Pacific Ocean Climate Studies (EPOCS), 28 May 1994 to 21 March 1995 (NODC Accession 9800041)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Wind and temperature data were collected using current meter in the TOGA Area - Pacific Ocean (30 N to 30 S) from May 28, 1994 to March 21, 1995. Data were submitted...

  10. Current meter - direction and other data from FIXED PLATFORMS in support of the MESA New York Bight (MESA-NYB) project from 1979-04-03 to 1979-07-11 (NODC Accession 8000011)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter - direction and other data were collected from FIXED PLATFORMS from 03 April 1979 to 11 July 1979. Data were collected by the National Ocean Service...

  11. Current meter components and other data from FIXED PLATFORMS as part of the World Ocean Circulation Experiment (WOCE) from 1992-02-26 to 1993-04-14 (NODC Accession 9700264)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from FIXED PLATFORMS. Data were collected by Oregon State University (OSU) as part of the World Ocean Circulation...

  12. Current meter - direction and other data from FIXED PLATFORMS in support of the Southern Coastal Plains Expedition (SCOPE) from 1972-02-13 to 1973-04-24 (NODC Accession 7500583)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter - direction and other data were collected from FIXED PLATFORMS from 13 February 1972 to 24 April 1973. Data were collected by the National Ocean...

  13. Physical, meteorological, wave spectra, and other data from CTD casts and current meters aboard NOAA Ship McARTHUR in the Columbia River (Wash./Oregon) from 1981-05-06 to 1981-11-25 (NODC Accession 8300033)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, meteorological, wave spectra, and other data were collected from CTD casts and current meters from NOAA Ship McARTHUR and other platforms in the Columbia...

  14. Marine chemistry, fish / shell-fish surveys, benthic organisms, and marine toxic substances and pollutants data from current meter and other instruments in the Gulf of Mexico from 1993-01-26 to 1994-06-13 (NODC Accession 9500088)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Marine chemistry, fish / shell-fish surveys, benthic organisms, and marine toxic substances and pollutants data were collected using current meter and other...

  15. Current and other data from meters attached to FIXED PLATFORMS in the coastal waters of Florida in support of the Subtropical Atlantic Climate Study 4 (STACS) from 1983-06-08 to 1983-12-13 (NODC Accession 8700019)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current and other data from meters attached to FIXED PLATFORMS in the coastal waters of Florida. Data were collected by University of Miami; Rosenstiel School of...

  16. Current and other data from meters attached to FIXED PLATFORMS in the coastal waters of Florida in support of the Subtropical Atlantic Climate Study 3 (STACS) from 1980-11-10 to 1983-06-07 (NODC Accession 8800120)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current and other data from meters attached to FIXED PLATFORMS in the coastal waters of Florida. Data were collected by University of Miami; Rosenstiel School of...

  17. Current and other data from meters attached to FIXED PLATFORMS in the coastal waters of Florida in support of the Subtropical Atlantic Climate Study 6 (STACS) from 1984-06-19 to 1987-03-27 (NODC Accession 8900060)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current and other data from meters attached to FIXED PLATFORMS in the coastal waters of Florida. Data were collected by University of Miami; Rosenstiel School of...

  18. Current meter and other data from fixed platforms as part of the International Decade of Ocean Exploration / Coastal Upwelling Ecosystems Analysis (IDOE/CUEA) from 01 July 1972 to 01 August 1972 (NODC Accession 7500614)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter and other data were collected from fixed platforms from 01 July 1972 to 01 August 1972. Data were collected by the Pacific Marine Environmental...

  19. Water physical and chemical data from current meter and bottle casts from the COLUMBUS ISELIN as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 1975-10-27 to 1975-11-06 (NODC Accession 7700454)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the COLUMBUS ISELIN from October 27, 1975 to November 6, 1975. Data were...

  20. Water physical and chemical data from current meter and bottle casts from the GILLISS as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 1976-02-04 to 1976-09-14 (NODC Accession 7700477)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the GILLISS and other platforms from February 4, 1976 to September 14,...

  1. Current meter - direction and other data from FIXED PLATFORMS in support of the MESA New York Bight (MESA-NYB) project from 1976-11-30 to 1977-04-25 (NODC Accession 7700712)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter - direction and other data were collected from FIXED PLATFORMS from 30 November 1976 to 25 April 1977. Data were collected by the National Ocean...

  2. Current meter - direction and other data from FIXED PLATFORMS in support of the Brine Disposal project from 1979-10-01 to 1980-01-01 (NODC Accession 8000049)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter - direction and other data were collected from FIXED PLATFORMS from 01 October 1979 to 01 January 1980. Data were collected by the National Data Buoy...

  3. Current meter and other data from FIXED PLATFORMS from the Gulf of Mexico and other locations as part of the Ocean Thermal Energy Conversion (OTEC) and other projects from 24 October 1964 to 01 November 1977 (NODC Accession 7800586)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected from FIXED PLATFORMS from the Gulf of Mexico and Straits of Florida. Data were submitted by the Atlantic Oceanographic and...

  4. Current meter components and other data from fixed platforms from the Straits of Florida in support of the Southeast Florida and Caribbean Recruitment Program (SEFCAR) from 1989-04-08 to 1994-11-21 (NODC Accession 9600059)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from fixed platforms in the Straits of Florida from 08 April 1989 to 21 November 1994. Data were collected by the...

  5. Current meter components and other data from fixed platforms from the East China Sea (Tung Hai) as part of the United States/Peoples Republic of China Cooperative Study from 03 June 1980 to 04 August 1981 (NODC Accession 8700311)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from fixed platforms from the East China Sea (Tung Hai) from 03 June 1980 to 04 August 1981. Data were collected by the...

  6. Metering Plan: Intelligent Operational Strategies Through Enhanced Metering Systems

    Energy Technology Data Exchange (ETDEWEB)

    Pope, Jason E.

    2016-07-27

    The Sustainability Program at Pacific Northwest National Laboratory (PNNL) has adopted a “triple-bottom-line” approach of environmental stewardship, social responsibility, and economic prosperity to its operations. Metering at PNNL works in support of all three, specifically to measure and inform building energy use and greenhouse gas emissions and minimize water use. The foundation for metering at PNNL is a core goal set, which consists of four objectives: providing accurate data without interruption, analyzing data while it is still new, providing actionable recommendations to operations management, and ensuring PNNL’s compliance with contract metering requirements. These core objectives guide the decisions that we make during annual planning and as we operate throughout the year. This 2016 edition of the Metering Plan conveys the metering practices for and vision of the Sustainability Program. Changes in this plan from the 2015 edition include updated tables and an enhanced discussion on energy tracking systems used at PNNL. This plan also discusses updated benchmarking strategies using PNNL’s graphics and analytics tool, BuildingOS by Lucid Design Group. This plan presents our progress toward the metering goals shared by all federal agencies and highlights our successful completion of metering requirements. Currently, PNNL is fully compliant with the applicable legislative and Executive Order metering requirements. PNNL’s approach to the installation of new meters will be discussed. Perhaps most importantly, this plan details the analysis techniques utilized at PNNL that rely on the endless streams of data newly available as a result of increased meter deployment over the last several years. Previous Metering Plans have documented specific meter connection schemes as PNNL focused on deploying meters in a first step toward managing energy and water use. This plan serves not only to highlight PNNL’s successful completion of agency metering goals, but

  7. Mooring system for a permanently moored storage vessel at an offshore site

    Energy Technology Data Exchange (ETDEWEB)

    Flory, J.F.

    1983-01-24

    A vessel, e.g. a storage vessel, is permanently moored by means such as a yoke pivoted on the forecastle of the vessel to a mooring leg, e.g. a riser or anchor chain, which is attached to a base located on the ocean floor. Mounted on the vessel are tension, exerting means e.g. counterweights, springs, winches, etc., operably connected with the mooring leg for applying tension e.g. by lifting the yoke. The top of the mooring leg is connected to the end of the yoke through a mooring swivel and gimbaled mooring table or a universal joint. A fluid swivel may be located above the mooring table or about a load-carrying shaft connected to the mooring leg.

  8. Temperature profile and other data collected using current meter from the CHAIN from the Atlantic Ocean in part of the International Decade of Ocean Exploration / Mid-Ocean Dynamics Experiment from 12 February 1969 to 16 March 1972 (NODC Accession 7601355)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile, current meter, and wind speed/direction data were collected using current meter from the TRIDENT, KNORR, and BILLIE 2 in the Atlantic Ocean from...

  9. A novel flattop current regulated energy discharge type pulsed power supply and magnet yielding 4.4 kGauss-meter for 6 milliseconds

    International Nuclear Information System (INIS)

    Visser, A.T.

    1989-07-01

    Most energy discharge power supplies obtain their bursts of power from the energy stored in charged capacitors when it is suddenly released into a load. This note describes the design of a similar small 800 Joules energy discharge type power supply and magnet. The magnet gap is 2 in.x2 in.x25-1/2 in. long and produces about 4.4 kGauss-meters at a rate of 12 pulses per minute. Each pulse is current regulated at the top for a duration of 6 msec. and varies less than 0.6% of set value. Current regulation at flattop is obtained by switching a resistor in and out of the discharge circuit with an IGBT at a rate of about 5 kHz. Most energy discharge systems produce half sine wave pulses, and current regulation is obtained by controlling the charge voltage at the energy storage capacitor, resulting only in a controlled peak current value of the half sine wave pulse. The current value at the top changes substantially during 6 msec. depending on the operating frequency

  10. Results of Austin Moore replacement.

    Directory of Open Access Journals (Sweden)

    Jadhav A

    1996-04-01

    Full Text Available Forty cases of Austin Moore Replacement done for transcervical fractures of the femur in patients were reviewed after a period of 12 to 48 months postoperatively (mean 26 mth. 30 cases (75% had mild to severe pain of non-infective origin, starting as early as 6 months postoperatively. This was irrespective of the make, size or position (varus/valgus of the prosthesis. Though the Aufranc and Sweet clinical scoring was satisfactory in 65% cases, radiological evidence of complications like sinking, protrusion, etc. were seen in majority of the cases. Calcar resorption was seen in 34 cases (85% as early as 4 months postoperatively. Results of THR and bipolar replacement done for transcervical fractures in recent literature show 85% pain-free cases at 5 years. We feel that Austin Moore Replacement should be reserved for patients more than 65 years of age and those who are less active or debilitated because of other factors, because of increased acetabular wear with time in the younger individual. This is corroborated by unsatisfactory results in patients less than 65 years of age (p < 0.05.

  11. What is going on up there? - The Chukchi Sea Ecosystem Mooring

    Science.gov (United States)

    Janzen, C.; McCammon, M.; Danielson, S. L.; Winsor, P.; Hopcroft, R. R.; Lalande, C.; Stafford, K.; Hauri, C.; McDonnell, A. M. P.

    2016-02-01

    As Arctic regions are projected to strongly reflect the impacts of a changing climate, an effort is underway to make sustained, year-round measurements of concurrent physical and biogeochemical parameters in the Arctic. Deploying highly instrumented year-round moorings in the water is no simple feat, given harsh Arctic conditions that include the presence of sea ice and deep ice keels during much of the year. Enter the late-breaking ecosystem mooring located in the northeast Chukchi Sea. This mooring complements established biophysical moorings elsewhere in the northern Bering and Chukchi seas, including those maintained by NOAA-PMEL (M8), UW-APL (Bering Strait) and JAMSTEC moorings. (southern Chukchi and Barrow Canyon). The mooring described here is located on the southern flank of Hanna Shoal and provides a multi-disciplinary approach to year-round observations within a biological hotspot. The Chukchi Ecosystem Mooring is equipped with a sensor suite aimed to monitor and document the state of ocean acidification, nutrient and carbon cycles, particles, waves, currents and physical properties, and even passive and active acoustic monitoring for zooplankton, fish, and marine mammals. Having the simultaneous interdisciplinary measurements provides data valuable to an ecosystem-based approach to research and resource management. The fully outfitted observatory is providing an unprecedented view into the mechanistic workings of the Chukchi Shelf Ecosystem. The first mooring was deployed in September 2014 and recovered in August 2015. The August 2015 deployment consisted of three moorings, each with incremental sensor packages to complete the ecosystem sensor suite. The mooring construction and instrumentation are described in detail, including introduction to the advances in sensor technologies that enable such deployments. Year one data recovery summaries and plots are provided to demonstrate the capabilities.

  12. Water velocity meter

    Science.gov (United States)

    Roberts, C. W.; Smith, D. L.

    1970-01-01

    Simple, inexpensive drag sphere velocity meter with a zero to 6 ft/sec range measures steady-state flow. When combined with appropriate data acquisition system, it is suited to applications where large numbers of simultaneous measurements are needed for current mapping or velocity profile determination.

  13. The comparative analysis of the current-meter method and the pressure-time method used for discharge measurements in the Kaplan turbine penstocks

    Science.gov (United States)

    Adamkowski, A.; Krzemianowski, Z.

    2012-11-01

    The paper presents experiences gathered during many years of utilizing the current-meter and pressure-time methods for flow rate measurements in many hydropower plants. The integration techniques used in these both methods are different from the recommendations contained in the relevant international standards, mainly from the graphical and arithmetical ones. The results of the comparative analysis of both methods applied at the same time during the hydraulic performance tests of two Kaplan turbines in one of the Polish hydropower plant are presented in the final part of the paper. In the case of the pressure-time method application, the concrete penstocks of the tested turbines required installing a special measuring instrumentation inside the penstock. The comparison has shown a satisfactory agreement between the results of discharge measurements executed using the both considered methods. Maximum differences between the discharge values have not exceeded 1.0 % and the average differences have not been greater than 0.5 %.

  14. The comparative analysis of the current-meter method and the pressure-time method used for discharge measurements in the Kaplan turbine penstocks

    International Nuclear Information System (INIS)

    Adamkowski, A; Krzemianowski, Z

    2012-01-01

    The paper presents experiences gathered during many years of utilizing the current-meter and pressure-time methods for flow rate measurements in many hydropower plants. The integration techniques used in these both methods are different from the recommendations contained in the relevant international standards, mainly from the graphical and arithmetical ones. The results of the comparative analysis of both methods applied at the same time during the hydraulic performance tests of two Kaplan turbines in one of the Polish hydropower plant are presented in the final part of the paper. In the case of the pressure-time method application, the concrete penstocks of the tested turbines required installing a special measuring instrumentation inside the penstock. The comparison has shown a satisfactory agreement between the results of discharge measurements executed using the both considered methods. Maximum differences between the discharge values have not exceeded 1.0 % and the average differences have not been greater than 0.5 %.

  15. Current, profile, and other data from current meters and CTD casts from NOAA Ship DISCOVERER and other platforms from the NW Pacific (limit-180) as part of the VENTS program from 1991-06-11 to 1992-06-11 (NODC Accession 9300078)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current, profile, and other data were collected from current meters and CTD casts from NOAA Ship Discoverer and other platforms from the NW Pacific (limit-180) from...

  16. Current direction, marine toxic substances, and other data from current meters and grab casts from the GUSS III and other platforms in support of the Brine Disposal project from 1977-10-20 to 1979-04-16 (NODC Accession 8000029)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current direction, marine toxic substances, and other data from were collected from current meters and grab casts from the GUSS III and other platforms from 20...

  17. Physical, current, and other data from CTD casts, current meters, and drifting buoys from the NOAA ship Mt Mitchell in the Persian Gulf as part of the Straits of Hormuz project from 26 February 1992 to 22 June 1992 (NODC Accession 9600082)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, current, and other data were collected from CTD casts, current meters, and drifting buoys from the NOAA ship Mt Mitchell in the Persian Gulf and other...

  18. Ocean Response to Tropical Storms as Observed by a Moored Ocean Observing System in the Deep Gulf of Mexico

    Science.gov (United States)

    Oropeza, F.; Jaramillo, S.; Fan, S.

    2013-05-01

    As part of the support activities for a deepwater development in the Gulf of Mexico, a moored ocean observing system (OOS) was deployed in a water depth of approximately 2500m, 300km south of the Louisiana Coast. From June 2007 to May 2009, the system comprised seven single point Aanderaa Recording Current Meters (RCM), deployed at 450m, 700m, 1,100m, 1,500m, 2,000m, 2,400m and 2,490m below surface, and an RDI 75kHz Longranger Acoustic Doppler Current Profiler (ADCP), deployed between 249 and 373m below surface in upward-looking mode. Since May 2009, the OOS was upgraded to a Wavescan Buoy based moored system including meteorological sensors for: atmospheric pressure, air temperature, wind speed and direction; directional waves sensor; a Doppler Current Sensor (DCS) at 1.5 m depth for surface currents; and two downward-looking ADCP's covering the upper 1,000m of the water column. This OOS has been operating without interruptions from 2007 to the present and has registered data associated with nine tropical storms, including the direct passage of Hurricane Ike, in September of 2008, and loop current events with speeds of up to 4 knots. It has provided one of the most comprehensive set of velocity observations in the Gulf of Mexico, especially, the near surface currents, during pre-storm conditions, response, and ocean relaxation following hurricanes/tropical storms. Based on these observations the upper ocean responses to the energy input from tropical storms are characterized in terms of the associated mixing processes and momentum balances.

  19. Mooring Line for an Oceanographic Buoy System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A mooring line for an oceanographic buoy system includes four sections. The first section is a protected cable that is connectable to the buoy. The second section is...

  20. Update on TAO moored ORG array

    Science.gov (United States)

    Freitag, H. Paul

    1994-01-01

    During the Coupled Ocean Atmosphere Response Experiment (COARE) six TAO moorings were equipped with optical rain gauges (ORG's). In late 1993 moorings deployed on the equator at 154E and 157.5E were recovered and not redeployed as they were augmentations to the TAO array for COARE only. In December 1993, four TAO moorings were equipped with ORG's: one each at 2N, 156E and 2S, 156E and ORG doublets on the equator at 0, 156E and 0, 165E. The 2N, 156E mooring has been lost. By the end of April all sites will have been serviced and six refurbished sensors will again be deployed in the same locations.

  1. Methods in mooring deep sea sediment traps

    Digital Repository Service at National Institute of Oceanography (India)

    Venkatesan, R.; Fernando, V.; Rajaraman, V.S.; Janakiraman, G.

    The experience gained during the process of deployment and retrieval of nearly 39 sets of deep sea sediment trap moorings on various ships like FS Sonne, ORV Sagarkanya and DSV Nand Rachit are outlined. The various problems encountered...

  2. Extending Moore’s Law for Silicon CMOS using More-Moore and More-than-Moore Technologies

    KAUST Repository

    Hussain, Aftab M.

    2016-12-01

    With the advancement of silicon electronics under threat from physical limits to dimensional scaling, the International Technology Roadmap for Semiconductors (ITRS) released a white paper in 2008, detailing the ways in which the semiconductor industry can keep itself continually growing in the twenty-first century. Two distinct paths were proposed: More-Moore and More-than-Moore. While More-Moore approach focuses on the continued use of state-of-the-art, complementary metal oxide semiconductor (CMOS) technology for next generation electronics, More-than-Moore approach calls for a disruptive change in the system architecture and integration strategies. In this doctoral thesis, we investigate both the approaches to obtain performance improvement in the state-of-the-art, CMOS electronics. We present a novel channel material, SiSn, for fabrication of CMOS circuits. This investigation is in line with the More-Moore approach because we are relying on the established CMOS industry infrastructure to obtain an incremental change in the integrated circuit (IC) performance by replacing silicon channel with SiSn. We report a simple, low-cost and CMOS compatible process for obtaining single crystal SiSn wafers. Tin (Sn) is deposited on silicon wafers in the form of a metallic thin film and annealed to facilitate diffusion into the silicon lattice. This diffusion provides for sufficient SiSn layer at the top surface for fabrication of CMOS devices. We report a lowering of band gap and enhanced mobility for SiSn channel MOSFETs compared to silicon control devices. We also present a process for fabrication of vertically integrated flexible silicon to form 3D integrated circuits. This disruptive change in the state-of-the-art, in line with the More-than-Moore approach, promises to increase the performance per area of a silicon chip. We report a process for stacking and bonding these pieces with polymeric bonding and interconnecting them using copper through silicon vias (TSVs). We

  3. Evolutionary ethics from Darwin to Moore.

    Science.gov (United States)

    Allhoff, Fritz

    2003-01-01

    Evolutionary ethics has a long history, dating all the way back to Charles Darwin. Almost immediately after the publication of the Origin, an immense interest arose in the moral implications of Darwinism and whether the truth of Darwinism would undermine traditional ethics. Though the biological thesis was certainly exciting, nobody suspected that the impact of the Origin would be confined to the scientific arena. As one historian wrote, 'whether or not ancient populations of armadillos were transformed into the species that currently inhabit the new world was certainly a topic about which zoologists could disagree. But it was in discussing the broader implications of the theory...that tempers flared and statements were made which could transform what otherwise would have been a quiet scholarly meeting into a social scandal' (Farber 1994, 22). Some resistance to the biological thesis of Darwinism sprung from the thought that it was incompatible with traditional morality and, since one of them had to go, many thought that Darwinism should be rejected. However, some people did realize that a secular ethics was possible so, even if Darwinism did undermine traditional religious beliefs, it need not have any effects on moral thought. Before I begin my discussion of evolutionary ethics from Darwin to Moore, I would like to make some more general remarks about its development. There are three key events during this history of evolutionary ethics. First, Charles Darwin published On the Origin of the Species (Darwin 1859). Since one did not have a fully developed theory of evolution until 1859, there exists little work on evolutionary ethics until then. Shortly thereafter, Herbert Spencer (1898) penned the first systematic theory of evolutionary ethics, which was promptly attacked by T.H. Huxley (Huxley 1894). Second, at about the turn of the century, moral philosophers entered the fray and attempted to demonstrate logical errors in Spencer's work; such errors were alluded

  4. Smart metering - energy data management at every meter point; Smart Metering - Energiedatenmanagement an jedem Zaehlpunkt

    Energy Technology Data Exchange (ETDEWEB)

    Keller-Giessbach, D.; Kiel, E. [LogicaCMG, Muenchen (Germany)

    2007-09-15

    The demise of monopolistic structures in the German energy market has also led to a change of perspective on metering. New requirements have to be met. Even in mass processing jobs such as meter reading it is no longer sufficient to simply read consumption data off a technically reliable meter or have customers do this themselves in preparation of billing. Currently used meters were not designed with a mind to demand management, environmental protection through energy conservation, changes in consumer behaviour or new service offers. This has been recognised in many European countries since the beginning of the present decade. The traditional task of metering is developing into a more comprehensive energy data management that takes account of the needs of customers, energy suppliers and regulatory requirements.

  5. Current measurement studies around the Cesme Peninsula (Turkey)

    International Nuclear Information System (INIS)

    Taspinar, N.

    1989-04-01

    In order to design coastal structures and marine vehicles safely, it is required to know current climate which shows the variation of the current characteristics with time. There are a wide variety of current meters designed to measure water flow today. Each current meter is capable of recording the influence of mooring arrangement. Here we describe sea water temperatures, salinities and current velocities at offshore of Akburun, Tatlicak Burnu, Kalem Burnu and Kizil Burun areas in Cesme Peninsula 27 August, 1986 to 19 November, 1986. At the end of the investigations, measured significant maximum and average current velocities have been routinely analysed with micro-computers and also the percentages of current velocity have been calculated. (author). 8 refs, 6 figs, 4 tabs

  6. Oceanographic data obtained from CTD and current meters as part of the Dynamics of the Loop Current in U.S. Waters project in the Gulf of Mexico from 2009-04-19 to 2011-11-14 (NCEI Accession 0126392)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The study design for the in-situ measurements consisted of an array of nine full-depth (or tall) moorings, six near-bottom moorings, and 25 Pressure Inverted Echo...

  7. Robust Meter Network for Water Distribution Pipe Burst Detection

    OpenAIRE

    Donghwi Jung; Joong Hoon Kim

    2017-01-01

    A meter network is a set of meters installed throughout a water distribution system to measure system variables, such as the pipe flow rate and pressure. In the current hyper-connected world, meter networks are being exposed to meter failure conditions, such as malfunction of the meter’s physical system and communication system failure. Therefore, a meter network’s robustness should be secured for reliable provision of informative meter data. This paper introduces a multi-objective optimal me...

  8. Portable wireless metering

    Energy Technology Data Exchange (ETDEWEB)

    DiPaola, L

    1996-12-31

    Electric utilities often face situations where conventional distribution station billing meters have been removed from service. This paper presents an innovative alternative to traditional solutions to the temporary billing situation such as the use of clamp-on devices called electronic recording ammeters. It examines how Ontario Hydro is measuring current, voltage, and power factor at a distribution station to calculate kilowatts and kVAR using an easy-to-install product that communicates its live readings directly to an existing billing system. The devices used for the measurements can be easily attached to a power line with a hotstick and contain a special core which senses current flow and powers appropriate electronics, which digitizes voltage and current data and transmits it via low-power FM radio for subsequent data storage and processing. The paper includes results of field trials and outlines the advantages of using the device.

  9. Currents, temperature, and salinity data recorded continuously from May 12, 2010 to December 16, 2010 from the surface to 1000 meters at a coastal location near the 1600 meters isobath off SW Oahu, Hawaii (NODC Accession 0072305)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset contains ADCP Workhorse Long Ranger current records from 50 to 950m depth and Seabird CTD at 20, 80, 130, 230, 500, 850, and 1000m, recorded continuously...

  10. Remembering Mary Tyler Moore | MedlinPlus Magazine

    Science.gov (United States)

    ... Remembering Mary Tyler Moore Follow us NIH MedlinePlus Magazine Remembers Mary Tyler Moore A little more than ... helped launch the first issue of NIH MedlinePlus magazine on Capitol Hill. The award-winning actress and ...

  11. comparative study of moore and mealy machine models adaptation

    African Journals Online (AJOL)

    user

    automata model was developed for ABS manufacturing process using Moore and Mealy Finite State Machines. Simulation ... The simulation results showed that the Mealy Machine is faster than the Moore ..... random numbers from MATLAB.

  12. Sampling efficiency of the Moore egg collector

    Science.gov (United States)

    Worthington, Thomas A.; Brewer, Shannon K.; Grabowski, Timothy B.; Mueller, Julia

    2013-01-01

    Quantitative studies focusing on the collection of semibuoyant fish eggs, which are associated with a pelagic broadcast-spawning reproductive strategy, are often conducted to evaluate reproductive success. Many of the fishes in this reproductive guild have suffered significant reductions in range and abundance. However, the efficiency of the sampling gear used to evaluate reproduction is often unknown and renders interpretation of the data from these studies difficult. Our objective was to assess the efficiency of a modified Moore egg collector (MEC) using field and laboratory trials. Gear efficiency was assessed by releasing a known quantity of gellan beads with a specific gravity similar to that of eggs from representatives of this reproductive guild (e.g., the Arkansas River Shiner Notropis girardi) into an outdoor flume and recording recaptures. We also used field trials to determine how discharge and release location influenced gear efficiency given current methodological approaches. The flume trials indicated that gear efficiency ranged between 0.0% and 9.5% (n = 57) in a simple 1.83-m-wide channel and was positively related to discharge. Efficiency in the field trials was lower, ranging between 0.0% and 3.6%, and was negatively related to bead release distance from the MEC and discharge. The flume trials indicated that the gellan beads were not distributed uniformly across the channel, although aggregation was reduced at higher discharges. This clustering of passively drifting particles should be considered when selecting placement sites for an MEC; further, the use of multiple devices may be warranted in channels with multiple areas of concentrated flow.

  13. Smart meter status report from Toronto

    International Nuclear Information System (INIS)

    O'Brien, D.

    2006-01-01

    An update of Toronto Hydro's smart metering program was presented. Electricity demand is expected to keep increasing, and there is presently insufficient generation to match supply needs in Ontario. The smart metering program was introduced to aid in the Ontario government's energy conservation strategy, as well as to address peak supply problems that have led to power outages. It is expected that the smart metering program will reduce provincial peak supply by 5 per cent, as the meters support both time-of-use rates and critical peak pricing. Over 800,000 smart meters will be supplied to customers by 2007, and all 4.3 million homes in Toronto will have a smart meter by 2010. In order to meet targets for 2010, the utility will continue to install more 15,000 meters each month for the next 4 years. While the Ontario government has planned and coordinated the rollout and developed smart metering specifications and standards, Toronto Hydro is responsible for the purchase, installation, operation and maintenance of the meters. Advance testing of each meter is needed to ensure billing accuracy, and customer education on meter use is also. The complexity of the metering program has led the utility to establish a rigid project management process. Customer education pilot program are currently being conducted. Experience gained during the earlier phases of the program have enabled the utility to select appropriate metering systems based on density, topography and physical conditions. Project expenditures have been within budget due to improved project estimating and planning. The metering program has been conducted in tandem with the utility's peakSAVER program, a residential and small commercial load control program that has been successful in reducing summer peak demand by cycling air conditioners without causing discomfort. It was concluded that the utility will continue with its mass deployment of smart meters, and is currently preparing its call center to handled

  14. Evolutionary Excesses: A Response to Moore

    Science.gov (United States)

    Barr, Stephen M.

    2002-01-01

    The physicist Edward Teller once gave an interview to a woman from a popular science magazine. He began the interview by saying, "You have heard many bad things about the Hydrogen Bomb. Now I am going to tell you some nice things about it." In reflecting upon a response to Dr. Randy Moore, the author thought of Teller, seeing his role here in…

  15. U.S. GLOBEC Georges Bank Long-Term Moored Program. Part 1. Mooring Configuration

    National Research Council Canada - National Science Library

    Irish, J. D; Kerry, S; Fucile, P; Beardsley, R. C; Lord, J; Brink, K. H

    2005-01-01

    As part of the U.S. GLOBEC Northwest Atlantic/Georges Bank program, moorings were deployed on Georges Bank as part of the broad-scale survey component to help measure the temporal variability of both physical...

  16. Corrosion behaviour of mooring chain steel in seawater

    NARCIS (Netherlands)

    Zhang, X.; Noel, N.; Ferrari, G.; Hoogland, M.G.

    2016-01-01

    Failures of mooring lines on floating production, storage and offloading systems (FPSOs) raise concern to the offshore industry. Localized corrosion of mooring chain is regarded as one of main failure mechanisms. The project of Localized Mooring Chain Corrosion (LMCC) is aiming at studying the

  17. A Probabilistic Model of Meter Perception: Simulating Enculturation

    NARCIS (Netherlands)

    van der Weij, B.; Pearce, M.T.; Honing, H.

    Enculturation is known to shape the perception of meter in music but this is not explicitly accounted for by current cognitive models of meter perception. We hypothesize that the induction of meter is a result of predictive coding: interpreting onsets in a rhythm relative to a periodic meter

  18. Multitasking metering enhances generation, transmission operations

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, E.

    2008-11-15

    The Dairyland Power Cooperative (DPC) which operates from La Crosse, Wisconsin has the capacity to generate and transmit 1000 MW of power to 25 member cooperatives and 20 municipalities who serve over 500,000 customers. When DPC was experiencing diminished service within its analog cellular-based data communications system, it was presented with an opportunity to install a new automated telecommunications system that would provide secure collection of meter readings from all of its substations. DPC decided to evaluate an advanced multifunctional digital meter from Schweitzer Engineering Laboratories (SEL). The SEL-734 Revenue Metering System offers complete instantaneous metering functions, including voltages, currents, power, energy and power factor. Other capabilities include predictive demand, time-of-use metering, automatic voltage monitoring, harmonics metering and synchrophasor measurement. From a metering perspective, DPC wanted to perform daily load profiles and interval-by-interval metering of their delivery points for billing purposes. They also wanted to provide real-time monitoring of electricity being delivered for both generation and transmission purposes and to make that information available to a distribution SCADA system for their members. The SEL-734 Revenue Meter was well suited to those needs. The SEL-734 provides very high-accuracy energy metering, load profile data collection, instantaneous power measurements, power quality monitoring, and communicates simultaneously over a modem, serial ports, and wide area networks (WAN). The meter is backed with a ten-year warranty as well as field support engineers. 5 figs.

  19. POLLA/IECTA, ENDF/B Reich-Moore to Adler-Adler Resonance Parameter Conversion

    International Nuclear Information System (INIS)

    Carlson, B.V.; Chalhoub, E.S.; Melnikoff, M.

    1987-01-01

    1 - Description of program or function: POLLA1 transforms Reich-Moore resolved resonance parameters to the corresponding positive momentum Adler-Adler ones. It is designed to run directly on a file in the ENDF/B format, creating a new file in which the Reich-Moore parameterization has been replaced by the Adler-Adler one. 2 - Method of solution: The Adler-Adler poles are obtained by applying Newton's method to the inverse of the determinant of the Reich-Moore pole matrix. The perturbative solution of R.B. Perez and G. de Saussure, Phys. Rev. C10 (1974)187, is used as a first guess. The residues at the poles are calculated using a simple numerical difference method. 3 - Restrictions on the complexity of the problem: As currently dimensioned, the program permits a maximum of 400 coherent resonances. The transformation itself, which neglects all negative momentum poles, is only accurate for heavy nuclei

  20. Charlotte Moore Sitterly: A Life of Spectroscopy

    Science.gov (United States)

    Rubin, Vera C.

    2010-01-01

    Dr. Charlotte Moore Sitterly was a scientist in an era when it was rare for a woman to have the opportunity to devote her life to forefront science. Following her graduation from Swarthmore College in 1920, she accepted a position at Princeton University as an assistant to Henry Norris Russell. In 1925 she started a study of the solar spectrum. She could then not know that she would devote much of her scientific career to gathering basic atomic data that are invaluable to the scientific community, even today. In 1931 she obtained a PhD degree at U. California, Berkeley, and returned to Princeton as a staff member of the Princeton University Observatory. In 1945 she moved to the National Bureau of Science (NBS), to supervise preparation of the widely used tables of atomic energy levels. Following the successful lunching (1946) of a V2 rocket to obtain the ultra violet spectrum of the sun, Moore started working with Richard Tousey and his group at the Naval Research Laboratory (NRL). Ultimately, they extended the solar spectrum down to 2200 angstroms. She continued her affiliations with NBS and NRL until her death in 1990. Charlotte Moore was rare scientist who devoted her career to obtaining accurate numbers, thus enabling the scientific community to open her tables and know that the data are accurate.

  1. Design of the Wave Dragon Mooring System

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano

    with experimental data, derived from tank tests of the 2nd generation scaled model of the device. In phase 2 further tank testing has been carried out on a novel 3rd generation scaled model to assess the design loads in the mooring system and the extreme response of the device in surge, heave and pitch to extreme...... storm conditions typical of the DanWEC location. The most desirable mooring configuration has also been better defined in terms of horizontal compliance. In phase 3 results from phase 1 shall be used to setup a numerical model for time-domain analysis of the composite system Wave Dragon + moorings......This report is part of the project “Wave Dragon 1.5 MW North Sea Demonstrator”, funded by the Danish Energy Agency under the EUDP program (J.no. 64010-0405). In phase 1 of the project the hydrodynamic characterization of Wave Dragon was carried out through numerical analysis with a model calibrated...

  2. Physical, chemical, and deepwater current profiles collected from CTD, XBT, and ADCP moorings in the Eastern Gulf of Mexico from January 19, 2005 to January 28, 2006 (NODC Accession 0070922)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A Minerals Management Service (MMS) program entitled Survey of Deepwater Currents in the Eastern Gulf of Mexico, awarded to Evans-Hamilton, Inc. This data set...

  3. Investigation and Comparison of Separate Meter-In Separate Meter-Out Control Strategies

    DEFF Research Database (Denmark)

    Pedersen, Henrik C.; Andersen, Torben Ole; Skoubo, Tobias

    2014-01-01

    In the later years, there has been an increased focus on new valve types, which yield the possibility to do Separate Meter-In Separate Meter-Out (SMISMO) control. This includes both digital valves, but proportional valves with separate metering spools and build in pressure sensors are also emerging....... The possibility to independently control the meter-in and meter-out side not only increase the functionality of the system, but also opens up for better performance and/or lowered energy consumption. The focus of the current paper is therefore on investigation and comparison of what may be obtained using...

  4. Mooring Line Damping Estimation for a Floating Wind Turbine

    Directory of Open Access Journals (Sweden)

    Dongsheng Qiao

    2014-01-01

    Full Text Available The dynamic responses of mooring line serve important functions in the station keeping of a floating wind turbine (FWT. Mooring line damping significantly influences the global motions of a FWT. This study investigates the estimation of mooring line damping on the basis of the National Renewable Energy Laboratory 5 MW offshore wind turbine model that is mounted on the ITI Energy barge. A numerical estimation method is derived from the energy absorption of a mooring line resulting from FWT motion. The method is validated by performing a 1/80 scale model test. Different parameter changes are analyzed for mooring line damping induced by horizontal and vertical motions. These parameters include excitation amplitude, excitation period, and drag coefficient. Results suggest that mooring line damping must be carefully considered in the FWT design.

  5. Mooring line damping estimation for a floating wind turbine.

    Science.gov (United States)

    Qiao, Dongsheng; Ou, Jinping

    2014-01-01

    The dynamic responses of mooring line serve important functions in the station keeping of a floating wind turbine (FWT). Mooring line damping significantly influences the global motions of a FWT. This study investigates the estimation of mooring line damping on the basis of the National Renewable Energy Laboratory 5 MW offshore wind turbine model that is mounted on the ITI Energy barge. A numerical estimation method is derived from the energy absorption of a mooring line resulting from FWT motion. The method is validated by performing a 1/80 scale model test. Different parameter changes are analyzed for mooring line damping induced by horizontal and vertical motions. These parameters include excitation amplitude, excitation period, and drag coefficient. Results suggest that mooring line damping must be carefully considered in the FWT design.

  6. Rocking the boat: damage to eelgrass by swinging boat moorings

    OpenAIRE

    Unsworth, Richard K. F.; Williams, Beth; Jones, Benjamin L.; Cullen-Unsworth, Leanne

    2017-01-01

    Seagrass meadows commonly reside in shallow sheltered embayments typical of the locations that provide an attractive option for mooring boats. Given the potential for boat moorings to result in disturbance to the seabed due to repeated physical impact, these moorings may present a significant threat to seagrass meadows. The seagrass Zostera marina (known as eelgrass) is extensive across the northern hemisphere, forming critical fisheries habitat and creating efficient long-term stores of carb...

  7. Rocking the Boat: Damage to Eelgrass by Swinging Boat Moorings

    Directory of Open Access Journals (Sweden)

    Richard K. F. Unsworth

    2017-07-01

    Full Text Available Seagrass meadows commonly reside in shallow sheltered embayments typical of the locations that provide an attractive option for mooring boats. Given the potential for boat moorings to result in disturbance to the seabed due to repeated physical impact, these moorings may present a significant threat to seagrass meadows. The seagrass Zostera marina (known as eelgrass is extensive across the northern hemisphere, forming critical fisheries habitat and creating efficient long-term stores of carbon in sediments. Although boat moorings have been documented to impact seagrasses, studies to date have been conducted on the slow growing Posidonia species’ rather than the fast growing and rapidly reproducing Z. marina that may have a higher capacity to resist and recover from repeated disturbance. In the present study we examine swinging chain boat moorings in seagrass meadows across a range of sites in the United Kingdom to determine whether such moorings have a negative impact on the seagrass Zostera marina at the local and meadow scale. We provide conclusive evidence from multiple sites that Z. marina is damaged by swinging chain moorings leading to a loss of at least 6 ha of United Kingdom seagrass. Each swinging chain mooring was found to result in the loss of 122 m2 of seagrass. Loss is restricted to the area surrounding the mooring and the impact does not appear to translate to a meadow scale. This loss of United Kingdom seagrass from boat moorings is small but significant at a local scale. This is because it fragments existing meadows and ultimately reduces their resilience to other stressors. Boat moorings are prevalent in seagrass globally and it is likely this impairs their ecosystem functioning. Given the extensive ecosystem service value of seagrasses in terms of factors such as carbon storage and fish habitat such loss is of cause for concern. This indicates the need for the widespread use of seagrass friendly mooring systems in and around

  8. An investigation of an evaluation of the environmental conditions in analyses of a guide pipe and moorings of a drilling ship when drilling at great sea depths, Part two

    Energy Technology Data Exchange (ETDEWEB)

    Hiroichi, H; Susumu, K; Tetsuo, M; Yasuhiko, M

    1983-01-01

    The application of the results of analysis of the behavior of an offshore guide pipe and a system of mooring for evaluating the critical environmental conditions in the real plane of drilling offshore wells in great water depths in the region of Miyakodzima oki and Omadedzaki oki is examined. The following criteria were used in designing the moorings and the offshore guide pipe for Miyakodzima-oki: the maximal linear stretching stress of the moorings must be less than or equal to one third the rupture strength, the maximal angle of phiim, the angle between the vertical line and the lower part of this pipe, equal to 4 degrees and the maximal stress in the guide pipe of less than 40 percent of the fluidity limit, in storm conditions these indicators must be one third the rupture strength, 10 degrees and 60 percent of the fluidity limit, respectively. Data are cited from an analysis of the guide pipe, the stress of the moorings and the equipment. The results of static and dynamic analyses of an offshore guide pipe in the conditions of the Miyakodzima oki sea are compared. It is shown that with drilling in waves with a height of 5.7 meters and a period of 8.7 seconds and a current rate of 1.5 to 2.6 meters per second the horizontal shift of the drilling ship relative to the preventers (Sbs) is 4 percent, the stretching tension of the guide pipe based on the static analysis is 93 megapascals and based on dynamic analysis (hereinafter indicated in parentheses) (93 megapascals), phiim of 3.44 degrees (3.7 degrees) and in storm conditions at a wave height of 1.42 and period of 13.8 seconds the stress of the guide pipe reaches 148 megapascals (150 megapascals) and phiim is 7.73 degrees (8.4 degrees). These data attest to the fact that the static and dynamic analysis produce approximately identical results.

  9. Digital temperature meter

    Energy Technology Data Exchange (ETDEWEB)

    Glowacki, S

    1982-01-01

    Digital temperature meter for precise temperature measurements is presented. Its parts such as thermostat, voltage-frequency converter and digital frequency meter are described. Its technical parameters such as temperature range 50degC-700degC, measurement precision 1degC, measurement error +-1degC are given. (A.S.).

  10. Radioisotope conveyor ash meter

    International Nuclear Information System (INIS)

    Savelov, V.D.

    1994-01-01

    Radioisotope conveyor ash meter realizes persistent measuring of ashiness of coal and products of its enrichment on the belt conveyor without contact. The principle of ash meter acting is based on functional dependence of the gamma radiation flows backscattering intensity of radioisotope sources from the ash volume content in the controlled fuel. Facility consists from the ashiness transducer and the processing and control device

  11. Optical cycle power meter

    DEFF Research Database (Denmark)

    2014-01-01

    A bicycle power meter for measuring power generated when riding a bicycle, the power meter comprising a position-sensitive radiation detector (409) attachable to a component of a crank set (404) of bicycle, and a radiation source (408) attachable to the component of the crank set and configured t...

  12. Ultrasonic flow meter

    NARCIS (Netherlands)

    Lötters, Joost Conrad; Snijders, G.J.; Volker, A.W.F.

    2014-01-01

    The invention relates to an ultrasonic flow meter comprising a flow tube for the fluid whose flow rate is to be determined. The flow meter comprises a transmitting element for emitting ultrasonic waves, which is provided on the outer jacket of the flow tube. A receiving element, which is provided on

  13. Novel Quantification of Sediment Concentration in Turbidity Currents Through in-situ Measurements of Conductivity and Temperature

    Science.gov (United States)

    Xu, J.; Wang, Z.; Gwiazda, R.; Paull, C. K.; Talling, P.; Parsons, D. R.; Maier, K. L.; Simmons, S.; Cartigny, M.

    2017-12-01

    During a large turbidity current event observed by seven moorings placed along Monterey Canyon, offshore central California, in the axial channel between 300 and 1900 meters water depth, a conductivity/temperature sensor placed 11 meters above canyon floor on the mooring at 1500 meters water depth recorded a rapid decrease of conductivity and increase of temperature during the passage of a large turbidity current. The conductivity decline is unlikely caused by fresh water input owing to lack of precipitation in the region prior to the event. We investigated the mechanisms of turbidity currents' high sediment concentration reducing the measured conductivity. By conducting a series of laboratory experiments with a range of different concentrations, grain size, and water temperature combinations, we quantified a relationship between reduced conductivity and the elevated sediment concentration. This relationship can be used for estimating the very high sediment concentrations in a turbidity current with a condition of assuming constant salinity of the ambient seawater. The empirical relationship was then applied to the in-situ time-series of temperature and conductivity measured during this turbidity current. The highest sediment concentration, in the head of the flow, reached nearly 400 g/L (volume concentration 17%). Such a high value, which has yet been reported in literature for an oceanic turbidity current, will have significant implications for the dynamics and deposits of such flows.

  14. Current meter components and other data from fixed platforms from TOGA Area - Pacific (30 N to 30 S) and other locations in support of the Tropical Ocean Global Atmosphere (TOGA) and the Equatorial Pacific Ocean Climate Studies (EPOCS) projects from 1989-04-16 to 1990-05-14 (NODC Accession 9200266)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from fixed platforms from the TOGA Area - Pacific (30 N to 30 S) and other locations from 16 April 1989 to 14 May 1990....

  15. Physical and other data from current meters, bottle casts, CTD casts, meteorological sensors, and other instruments from the GYRE as part of the Texas-Louisiana Shelf Circulation and Transport Processes Study (LATEX PART A) from 09 April 1992 to 02 October 1994 (NODC Accession 9500056)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical and other data were collected from current meters, bottle casts, CTD casts, meteorological sensors, and other instruments from the GYRE from 09 April 1992...

  16. Current meter components and other data from FIXED PLATFORMS from the NW Atlantic (limit-40 W) and others locations as part of the Coupled Ocean-Atmosphere Response Experiment (COARE) and other projects from 1984-02-26 to 1986-06-01 (NODC Accession 9100048)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from FIXED PLATFORMS in the NW Atlantic (limit-40 W) and others locations from 26 February 1984 to 01 June 1986. Data...

  17. Water physical and chemical data from current meter and bottle casts from the G.W. PIERCE as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 1975-10-22 to 1975-10-31 (NODC Accession 8200067)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the G.W. PIERCE from October 22, 1975 to October 31, 1975. Data were...

  18. Water physical and chemical data from current meter and bottle casts from the H.J.W. FAY and other platforms as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 1977-05-16 to 1977-09-15 (NODC Accession 7800386)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the H.J.W. FAY and other platforms from May 16, 1977 to September 15, 1977....

  19. CTD, current meter, pressure gauge, and wave spectra data from fixed platforms and other platforms from the Coastal Waters of California as part of the Santa Barbara Channel project from 1983-04-27 to 1985-01-04 (NODC Accession 8500177)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — CTD, current meter, pressure gauge, and wave spectra data were collected from fixed platforms and other platforms from the Coastal Waters of California from 27 April...

  20. Physical and other data from CTD casts, current meters, and other instruments from the SHOYO and other platforms from the North Pacific Ocean and other locations by the Japanese Hydrographic Office and the Maritime Safety Agency; Hydrographic Division from 01 January 1990 to 31 December 1991 (NODC Accession 9300113)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical and other data from CTD casts, current meters, and other instruments from the SHOYO and other platforms from the North Pacific Ocean and other locations...

  1. Water physical, chemical, and benthic organisms data from current meter and bottle casts from the H.J.W. FAY and CAPE HENLOPEN as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 03 November 1976 - 15 September 1977 (NODC Accession 7800319)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical, chemical, and benthic organisms data were collected using current meter and bottle casts from the H.J.W.FAY and CAPE HENLOPEN from November 3, 1976...

  2. Physical and other data from CTD casts, XBT casts, current meters, and other instruments from the SHOYO and other platforms from the NE Pacific (limit-180) and other locations by the Japanese Hydrographic Office and the Maritime Safety Agency; Hydrographic Division from 16 January 1993 to 01 December 1995 (NODC Accession 9600079)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical and other data from CTD casts, XBT casts, current meters, and other instruments from the SHOYO and other platforms from the NE Pacific (limit-180) and other...

  3. Current meter components and other data from XCP casts from VARIOUS SMALL VESSELS and other platforms from the North Atlantic Ocean as part of the OCEAN DUMPING and other projects from 01 December 1990 to 01 June 1991 (NODC Accession 9300076)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components and other data were collected from XCP casts from VARIOUS SMALL VESSELS and other platforms in the North Atlantic Ocean. Data were collected...

  4. Marching to the beat of Moore's Law

    Science.gov (United States)

    Borodovsky, Yan

    2006-03-01

    Area density scaling in integrated circuits, defined as transistor count per unit area, has followed the famous observation-cum-prediction by Gordon Moore for many generations. Known as "Moore's Law" which predicts density doubling every 18-24 month, it has provided all important synchronizing guidance and reference for tools and materials suppliers, IC manufacturers and their customers as to what minimal requirements their products and services need to meet to satisfy technical and financial expectations in support of the infrastructure required for the development and manufacturing of corresponding technology generation nodes. Multiple lithography solutions are usually under considerations for any given node. In general, three broad classes of solutions are considered: evolutionary - technology that is extension of existing technology infrastructure at similar or slightly higher cost and risk to schedule; revolutionary - technology that discards significant parts of the existing infrastructure at similar cost, higher risk to schedule but promises higher capability as compared to the evolutionary approach; and last but not least, disruptive - approach that as a rule promises similar or better capabilities, much lower cost and wholly unpredictable risk to schedule and products yields. This paper examines various lithography approaches, their respective merits against criteria of respective infrastructure availability, affordability and risk to IC manufacturer's schedules and strategy involved in developing and selecting best solution in an attempt to sort out key factors that will impact the decision on the lithography choice for large-scale manufacturing for the future technology nodes.

  5. Digital reactivity meter

    International Nuclear Information System (INIS)

    Copie, M.; Valantic, B.

    1978-01-01

    Digital reactivity meters (DRM) are mostly used as measuring instruments, e.g. for calibration of control rods, and there are only a few cases of their incorporation into the control systems of the reactors. To move in this direction there is more development work needed. First of all, fast algorithms are needed for inverse kinetics equations to relieve the computer for more important tasks of reactor model solving in real time. The next problem, currently under investigation, is the incorporation of the reactor thermal-hydraulic model into the DRM so that it can be used in the power range. Such an extension of DHM allows presentation not only of the instantaneous reactivity of the system, but also the inserted reactivity can be estimated from the temperature reactivity feed-backs. One of the applications of this concept is the anomalous digital reactivity monitor (ADRN) as part of the reactor protection system. As a solution of the first problem, a fast algorithm for solving the inverse kinetics equations has been implemented in the off-line program RODCAL on CDC 1700 computer and tested for its accuracy by performing different control rod calibrations on the reactor TRIGA

  6. Mooring Design Selection of Aquaculture Cage for Indonesian Ocean

    Science.gov (United States)

    Mulyadi, Y.; Syahroni, N.; Sambodho, K.; Zikra, M.; Wahyudi; Adia, H. B. P.

    2018-03-01

    Fish production is important for the economy in fishing community and for ensuring food security. Climate change will lead a threat to fish productivity. Therefore, a solution offered is to cultivate certain fish, especially those with high economic value by using offshore aquaculture technology. A Sea Station cage is one of the offshore aquaculture cage model that has been used in some locations. As a floating structure, the Sea Station cage need a mooring system to maintain its position. This paper presents the selection analysis of the mooring system designs of the Sea Station cage model that it is suitable with Indonesia Ocean. There are 3 mooring configurations that are linear array, rectangular array, and 4 points mooring type. The nylon mooring rope type has been selected to be used on the 3 mooring configurations and the rope has a diameter of 104 mm with a breaking force of 2.3 MN. Based on results from comparing the 3 mooring configurations, the best mooring configuration is linear array with the tension on the rope of 217 KN and has the safety factor of 0.2 based on DNVGL OS-E301

  7. Simplified Design Procedures for Moorings of Wave-Energy Converters

    DEFF Research Database (Denmark)

    Bergdahl, Lars; Kofoed, Jens Peter

    The goal of the report is that the reader shall be able to self-dependently make a first, preliminary analysis of wave-induced horizontal loads, motions and mooring forces for a moored floating wave energy device. Necessary prerequisites to attain that goal are the understanding of the physical p...

  8. Assessment of Available Numerical Tools for Dynamic Mooring Analysis

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Eskilsson, Claes; Ferri, Francesco

    This report covers a preliminary assessment of available numerical tools to be used in upcoming full dynamic analysis of the mooring systems assessed in the project _Mooring Solutions for Large Wave Energy Converters_. The assessments tends to cover potential candidate software and subsequently c...

  9. Full Dynamic Analysis of Mooring Solution Candidates - First Iteration

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco

    This report covers an initial full dynamic analysis of the mooring solutions for the four wave energy converters in the project “Mooring Solutions for Large Wave Energy Converters”. The analysis tends to provide the first understanding of the layouts and provide discussion on what parameters that...

  10. Treatment of femoral neck fracture by Moore Prosthesis in Cotonou ...

    African Journals Online (AJOL)

    Treatment of femoral neck fracture by Moore Prosthesis in Cotonou. AHM Akue, M Lawson, S Madougou, R Zannou, J Padonou. Abstract. Keywords: Benin; hip; Moore prosthesis; results. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  11. Fault Monitoring and Fault Recovery Control for Position Moored Tanker

    DEFF Research Database (Denmark)

    Fang, Shaoji; Blanke, Mogens

    2011-01-01

    . In addition to dedicated diagnosis, an optimal position algorithm is proposed to accommodate buoyancy element failure and keep the mooring system in a safe state. Furthermore, even in the case of line breakage, this optimal position strategy could be utilised to avoid breakage of a second mooring line...

  12. Moore'i seadus ja meie tulevik / Leo Võhandu

    Index Scriptorium Estoniae

    Võhandu, Leo, 1929-

    2006-01-01

    Kiibifirma Intel üks asutajaid Gordon Moore väitis 1965. aastal, et transistorite arv kiibil topeldub iga kahe aastaga ehk loomulik areng ei ole lineaarne, vaid eksponentsiaalne (astmeline). TTÜ emeriitprofessor Moore'i seaduse mõjust ühiskonna arengule. Vt. samas: Leo Võhandu

  13. On Mooring Solutions for Large Wave Energy Converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Kofoed, Jens Peter; Ferri, Francesco

    2017-01-01

    The present paper describes the work carried out in the project ’Mooring Solutions for Large Wave Energy Converters’, which is a Danish research project carried out in a period of three years from September 2014, with the aim of reducing cost of the moorings for four wave energy converters...

  14. Initial Assessment of Mooring Solutions for Floating Wave Energy Converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Kofoed, Jens Peter; Delaney, Martin

    2016-01-01

    The present study investigates three different types of mooring systems in order to establish potential cost reductions and applicability to wave energy converters (WECs). Proposed mooring systems for three existing WECs create the basis for this study, and the study highlights areas of interest ...

  15. Your Glucose Meter

    Science.gov (United States)

    ... Medical Devices Radiation-Emitting Products Vaccines, Blood & Biologics Animal & Veterinary Cosmetics Tobacco ... 164KB) En Español Basic Facts 7 Tips for Testing Your Blood Sugar and Caring for Your Meter ...

  16. Hydrogen meter prooftesting

    International Nuclear Information System (INIS)

    McCown, J.J.; Mettler, G.W.

    1976-04-01

    Two diffusion type hydrogen meters have been tested on the Prototype Applications Loop (PAL). The ANL designed unit was used to monitor hydrogen in sodium during FFTF startup and over a wide range of hydrogen concentrations resulting from chemical additions to the sodium and cover gas. A commercially available meter was added and its performance compared with the ANL unit. Details of the test work are described

  17. Bottom mounted seabed mooring frame for high current field

    Digital Repository Service at National Institute of Oceanography (India)

    AshokKumar, K.; Chandramohan, P.; Pednekar, P.S.; Diwan, S.G

    stream_size 48088 stream_content_type text/plain stream_name INCHOE_Proc_2004_2_812.pdf.txt stream_source_info INCHOE_Proc_2004_2_812.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 G56G49... G50 G51G114G100G32G73G110G100G105G97G110G32G78G97G116G105G111G110G97G108G32G67G111G110G102G101G114G101G110G99G101G32G111G110G32G72G97G114G98G111G117G114G32G38G32G79G99G101G97G110G32G69G110G103G105G110G101G101G114G105G110G103G44 G78G73G79G44G32G71G111...

  18. Digital reactivity meter

    International Nuclear Information System (INIS)

    Jiang Zongbing

    1996-02-01

    The importance and the usual methods of reactivity measurement in a nuclear reactor are presented. Emphasis is put upon the calculation principle, software and hardware components, main specifications, application, as well as the features of the digital reactivity meter. The test results of operation in various reactors shown that the meter possess the following features: high accuracy, short response time, low output noise, high resolution, wide measuring range, simple and flexible to operate, high stability and reliability. In addition, the reactivity meter can save the measuring data automatically and have a perfect capability of self-verifying. It not only meet the requirement of the reactivity measurement in nuclear power plant, but also can be applied to various types of reactors. (1 tab.)

  19. Digital reactivity meter

    International Nuclear Information System (INIS)

    Akkus, B.; Anac, H.; Alsan, S.; Erk, S.

    1991-01-01

    Nowadays, various digital methods making use of microcomputers for neutron detector signals and determining the reactivity by numerical calculations are used in reactor control systems in place of classical reactivity meters. In this work, a calculation based on the ''The Time Dependent Transport Equation'' has been developed for determining the reactivity numerically. The reactivity values have been obtained utilizing a computer-based data acquisition and control system and compared with the analog reactivity meter values as well as the values calculated from the ''Inhour Equation''

  20. Position Mooring Control Based on a Structural Reliability Criterion

    DEFF Research Database (Denmark)

    Fang, Shaoji; Leira, Bernt J.; Blanke, Mogens

    2013-01-01

    is achieved using structural reliability indices in a cost function, where both the mean mooring-line tension and dynamic effects are considered. An optimal set-point is automatically produced without need for manual interaction. The parameters of the extreme value distribution are calculated on-line thereby...... mooring lines simultaneously from exceeding a stress threshold, this paper suggests a new algorithm to determine the reference position and an associated control system. The safety of each line is assessed through a structural reliability index. A reference position where all mooring lines are safe...

  1. Conducted interference on smart meters

    NARCIS (Netherlands)

    Keyer, Cornelis H.A.; Leferink, Frank

    2017-01-01

    The increasing conducted interference caused by modern electronic equipment is causing more problems for electronic, or static, energy meters. These meters are called smart meters when equipped with a communication link, and are replacing the conventional electromechanical meters. It is known that

  2. Moore's Law, disruptive technologies, and the clinician.

    Science.gov (United States)

    Vosburgh, Kirby G; Newbower, Ronald S

    2002-01-01

    The advancement of technical power described by Moore's Law offers great potential for enabling more cost-effective medical devices and systems. However, progress has been slow. Many factors for this failure have been cited, including the anti-rational economic structure of healthcare and the complexity and long time scale of medical development. Christensen et al. suggest that "disruptive technologies" may circumvent some of these difficulties. "Disruptive Technologies" are defined as those that are established in one market, but then penetrate and overwhelm another market. These incursions are accelerated by economic factors, and capitalize on functionality, reliability, and advancements supported by the original market. Christensen has cited many examples from industrial and service businesses, but few examples can be found yet in healthcare. We argue that positive technology impacts in medicine occur most readily when innovators augment the skills of and collaborate with caregivers, rather than seeking to displace them. In the short term, a new approach may improve efficiency or quality. In the longer term, such approaches may obviate human tasks at lower-skill levels, and even permit task automation. One successful example has been the introduction of flexible monitoring for physiologic information. Systems for computer-aided diagnosis, which have failed to impact complex decision making, have succeeded in simpler specialty areas such as the interpretation of EKG's and mammograms, and may do the same with analysis of some pathology images. The next frontier may the operating room, and the adoption of such systemic technologies by caregivers in emergency medicine and general care may then have an even wider "disruptive" effect. Responding to time and cost pressures, and the desire to move care to the patient, other workers, such as radiologists, will drive the trend away from isolated, complex, large-scale devices, and toward integrated, modular, and simpler

  3. Carbon activity meter

    International Nuclear Information System (INIS)

    Roy, P.; Krankota, J.L.

    1975-01-01

    A carbon activity meter utilizing an electrochemical carbon cell with gaseous reference electrodes having particular application for measuring carbon activity in liquid sodium for the LMFBR project is described. The electrolyte container is electroplated with a thin gold film on the inside surface thereof, and a reference electrode consisting of CO/CO 2 gas is used. (U.S.)

  4. Verification and Validation of the New Dynamic Mooring Modules Available in FAST v8

    DEFF Research Database (Denmark)

    Wendt, Fabian F.; Andersen, Morten Thøtt; Robertson, Amy N.

    2016-01-01

    The open-source, aero-hydro-servo-elastic wind turbine simulation software FAST v8 (created by the National Renewable Energy Laboratory) was recently coupled to two newly developed mooring dynamics modules: MoorDyn and FEAMooring. MoorDyn is a lumped-mass-based mooring dynamics module developed b...

  5. Digital Receiver Phase Meter

    Science.gov (United States)

    Marcin, Martin; Abramovici, Alexander

    2008-01-01

    The software of a commercially available digital radio receiver has been modified to make the receiver function as a two-channel low-noise phase meter. This phase meter is a prototype in the continuing development of a phase meter for a system in which radiofrequency (RF) signals in the two channels would be outputs of a spaceborne heterodyne laser interferometer for detecting gravitational waves. The frequencies of the signals could include a common Doppler-shift component of as much as 15 MHz. The phase meter is required to measure the relative phases of the signals in the two channels at a sampling rate of 10 Hz at a root power spectral density measurements in laser metrology of moving bodies. To illustrate part of the principle of operation of the phase meter, the figure includes a simplified block diagram of a basic singlechannel digital receiver. The input RF signal is first fed to the input terminal of an analog-to-digital converter (ADC). To prevent aliasing errors in the ADC, the sampling rate must be at least twice the input signal frequency. The sampling rate of the ADC is governed by a sampling clock, which also drives a digital local oscillator (DLO), which is a direct digital frequency synthesizer. The DLO produces samples of sine and cosine signals at a programmed tuning frequency. The sine and cosine samples are mixed with (that is, multiplied by) the samples from the ADC, then low-pass filtered to obtain in-phase (I) and quadrature (Q) signal components. A digital signal processor (DSP) computes the ratio between the Q and I components, computes the phase of the RF signal (relative to that of the DLO signal) as the arctangent of this ratio, and then averages successive such phase values over a time interval specified by the user.

  6. Mary Tyler Moore Helps Launch NIH MedlinePlus Magazine

    Science.gov (United States)

    ... Issues Mary Tyler Moore Helps Launch NIH MedlinePlus Magazine Past Issues / Winter 2007 Table of Contents For ... Javascript on. Among those attending the NIH MedlinePlus magazine launch on Capitol Hill were (l-r) NIH ...

  7. Biographical Sketch: John Royal Moore, MD 1899–1988

    OpenAIRE

    Brand, Richard A.

    2011-01-01

    This biographical sketch on John R. Moore corresponds to the historic text, The Classic: Cartilaginous-cup Arthroplasty in Ununited Fractures of the Neck of the Femur (1948), available at DOI 10.1007/s11999-011-1974-z.

  8. AWI Moored ULS Data, Weddell Sea (1990-1998)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of moored Upward Looking Sonar (ULS) data from 14 stations in the Weddell Sea. Parameters in the processed data files are water pressure,...

  9. The RECENT code with the Reich-Moore parametrization

    International Nuclear Information System (INIS)

    Melnikoff, M.; Chalhoub, E.S.; Carlson, B.V.

    1985-01-01

    The program RECENT, which reconstructs neutron cross sections from resonance parameters given in the ENDF/B format, was modified in order to include in its structure the Reich-Moore parametrization. (Author) [pt

  10. Development of HMPE fiber for deep water permanent mooring applications

    Energy Technology Data Exchange (ETDEWEB)

    Vlasblom, Martin; Fronzaglia, Bill; Boesten, Jorn [DSM Dyneema, Urmond (Netherlands); Leite, Sergio [Lankhorst Ropes, Sneek (Netherlands); Davies, Peter [Institut Francais de Recherche pour L' Exploration de la Mer (IFREMER) (France)

    2012-07-01

    For a number of years, the creep performance of standard High Modulus Polyethylene (HMPE) fiber types has limited their use in synthetic offshore mooring systems. In 2003, a low creep HMPE fiber was introduced and qualified for semi-permanent MODU moorings. This paper reports on a new High Modulus Polyethylene fiber type with significantly improved creep properties compared to any other HMPE fiber type, which, for the first time, allows its use in permanent offshore mooring systems, for example for deep water FPSO moorings. Results on fiber and rope creep experiments and stiffness measurements are reported. Laboratory testing shows that ropes made with the new fiber type retain the properties characteristic of HMPE such as high static strength, high fatigue resistance and stiffness, and illustrate that stiffness properties determined on HMPE fiber or rope are dependent on the applied load and temperature. (author)

  11. Use of offshore mooring platform for sea wave motion analysis

    International Nuclear Information System (INIS)

    Cicconi, G.; Dagnino, I.; Papa, L.

    1979-01-01

    An offshore mooring platform for supertankers may often turn out to be an ideal solution for the problem of installing a meteorological station. Its location may be particularly desirable for the purpose of recording and analysing sea wave motion in deep water or in the intermediate zone between shallow and deep water. The preliminary results obtained through the operation of a subsurface sensor at the mooring platform off the harbour of Genova are reported. (author)

  12. Use of offshore mooring platform for sea wave motion analysis

    Energy Technology Data Exchange (ETDEWEB)

    Cicconi, G.; Dagnino, I.; Papa, L. (Genova Univ. (Italy). Ist. Geofisica e Geodetico); Basano, L.; Ottonello, P. (Genoa Univ. (Italy))

    An offshore mooring platform for supertankers may often turn out to be an ideal solution for the problem of installing a meteorological station. Its location may be particularly desirable for the purpose of recording and analysing sea wave motion in deep water or in the intermediate zone between shallow and deep water. The preliminary results obtained through the operation of a subsurface sensor at the mooring platform off the harbour of Genova are reported.

  13. James Moores Ball: Ophthalmologist, medical historian, bibliophile.

    Science.gov (United States)

    Feibel, Robert M

    2016-08-01

    James Moores Ball (1862-1929) was an ophthalmologist in St. Louis, Missouri, who excelled as a medical historian and collector of rare and historic books about the history of anatomy. During his lifetime, he was best known as the author of a comprehensive, authoritative, and popular textbook titled Modern Ophthalmology First published in 1904, there were five further editions. Ball was very interested in the history of anatomy and wrote two books on this subject, the first being a biography of Andreas Vesalius, one of the earliest in English, and the second a history of the resurrection men or grave robbers who sold corpses to professors of anatomy and surgery for teaching purposes. His legacy today is the 470 volumes of his personal library, which are now in the Archives and Rare Books department of the Becker Medical Library of the Washington University School of Medicine. These texts are one of their major collections, concentrating on the history of anatomy, beginning with a first edition of Vesalius's De Humani Corporis Fabrica and holding many important and beautiful landmark volumes of anatomical atlases. © The Author(s) 2016.

  14. A Nanotechnology Enhancement to Moore's Law

    Directory of Open Access Journals (Sweden)

    Jerry Wu

    2013-01-01

    Full Text Available Intel Moore observed an exponential doubling in the number of transistors in every 18 months through the size reduction of transistor components since 1965. In viewing of mobile computing with insatiate appetite, we explored the necessary enhancement by an increasingly maturing nanotechnology and facing the inevitable quantum-mechanical atomic and nuclei limits. Since we cannot break down the atomic size barrier, the fact implies a fundamental size limit at the atomic/nucleus scale. This means, no more simple 18-month doubling, but other forms of transistor doubling may happen at a different slope. We are particularly interested in the nano enhancement area. (i 3 Dimensions: If the progress in shrinking the in-plane dimensions is to slow down, vertical integration can help increasing the areal device transistor density. As the devices continue to shrink into the 20 to 30 nm range, the consideration of thermal properties and transport in such devices becomes increasingly important. (ii Quantum computing: The other types of transistor material are rapidly developed in laboratories worldwide, for example, Spintronics, Nanostorage, HP display Nanotechnology, which are modifying this Law. We shall consider the limitation of phonon engineering fundamental information unit “Qubyte” in quantum computing, Nano/Micro Electrical Mechanical System (NEMS, Carbon Nanotubes, single-layer Graphenes, single-strip Nano-Ribbons, and so forth.

  15. Charles Bachman Moore (1920-2010)

    Science.gov (United States)

    Winn, William; Krehbiel, Paul

    2011-02-01

    Charles B. Moore passed away 2 March 2010 at the age of 89, following a long and varied scientific career in meteorology and the atmospheric sciences. He will be remembered best for his substantial contributions in the field of atmospheric electricity and for the students and faculty he guided as chairman of Langmuir Laboratory for Atmospheric Research and professor of physics at the New Mexico Institute of Mining and Technology. He possessed a unique sense of humor and an excellent memory that served as a reservoir of scientific and historical knowledge. Like many of his generation, Charlie's career was profoundly influenced by the Second World War. Following Pearl Harbor, he interrupted his undergraduate studies in chemical engineering at Georgia Institute of Technology to enlist in the Army Air Corps, where he became the chief weather equipment officer in the 10th Weather Squadron, setting up and operating remote meteorological stations behind enemy lines in the China-Burma-India theater. He served with distinction alongside Athelstan Spilhaus Sr., who had been one of Charlie's instructors in the Army meteorology program.

  16. EMMNet: Sensor Networking for Electricity Meter Monitoring

    Directory of Open Access Journals (Sweden)

    Zhi-Ting Lin

    2010-06-01

    Full Text Available Smart sensors are emerging as a promising technology for a large number of application domains. This paper presents a collection of requirements and guidelines that serve as a basis for a general smart sensor architecture to monitor electricity meters. It also presents an electricity meter monitoring network, named EMMNet, comprised of data collectors, data concentrators, hand-held devices, a centralized server, and clients. EMMNet provides long-distance communication capabilities, which make it suitable suitable for complex urban environments. In addition, the operational cost of EMMNet is low, compared with other existing remote meter monitoring systems based on GPRS. A new dynamic tree protocol based on the application requirements which can significantly improve the reliability of the network is also proposed. We are currently conducting tests on five networks and investigating network problems for further improvements. Evaluation results indicate that EMMNet enhances the efficiency and accuracy in the reading, recording, and calibration of electricity meters.

  17. EMMNet: sensor networking for electricity meter monitoring.

    Science.gov (United States)

    Lin, Zhi-Ting; Zheng, Jie; Ji, Yu-Sheng; Zhao, Bao-Hua; Qu, Yu-Gui; Huang, Xu-Dong; Jiang, Xiu-Fang

    2010-01-01

    Smart sensors are emerging as a promising technology for a large number of application domains. This paper presents a collection of requirements and guidelines that serve as a basis for a general smart sensor architecture to monitor electricity meters. It also presents an electricity meter monitoring network, named EMMNet, comprised of data collectors, data concentrators, hand-held devices, a centralized server, and clients. EMMNet provides long-distance communication capabilities, which make it suitable suitable for complex urban environments. In addition, the operational cost of EMMNet is low, compared with other existing remote meter monitoring systems based on GPRS. A new dynamic tree protocol based on the application requirements which can significantly improve the reliability of the network is also proposed. We are currently conducting tests on five networks and investigating network problems for further improvements. Evaluation results indicate that EMMNet enhances the efficiency and accuracy in the reading, recording, and calibration of electricity meters.

  18. Methodological Issues in the Validation of Implicit Measures: Comment on De Houwer, Teige-Mocigemba, Spruyt, and Moors (2009)

    Science.gov (United States)

    Gawronski, Bertram; LeBel, Etienne P.; Peters, Kurt R.; Banse, Rainer

    2009-01-01

    J. De Houwer, S. Teige-Mocigemba, A. Spruyt, and A. Moors's normative analysis of implicit measures provides an excellent clarification of several conceptual ambiguities surrounding the validation and use of implicit measures. The current comment discusses an important, yet unacknowledged, implication of J. De Houwer et al.'s analysis, namely,…

  19. Vertical current data collected using current meter from KNORR and other platforms in North/South Pacific and Atlantic Ocean from 05 May 1974 to 27 April 1982 (NODC Accession 8600269)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Vertical current profiler data collected from various ships off of the "White Horse" instrument. Data were submitted by Dr. James Luyten of Woods Hole Oceanographic...

  20. Gamma absorption meter

    International Nuclear Information System (INIS)

    Dincklage, R.D. von.

    1984-01-01

    The absorption meter consists of a radiation source, a trough for the absorbing liquid and a detector. It is characterized by the fact that there is a foil between the detector and the trough, made of a material whose binding energy of the K electrons is a little greater than the energy of the photons emitted by the radiation source. The source of radiation and foil are replaceable. (orig./HP) [de

  1. Moore's law and mold making: staying in the megapixel race

    Science.gov (United States)

    Renkema, Kor

    2007-09-01

    In this presentation an impression is given of technical developments within Philips High Tech Plastics, a European supplier with a production facility in Suzhou, China. Philips HTP is making precision plastic and optical parts for the mass consumer electronics market; the largest part of its current business is camera objective lenses and actuators for mobile phone. A supplier in consumer electronics has to deal with Moore's law, being one of the most specific characteristics of this particular market. This law says that every 18 - 24 months the performance of computers will double, while the price at the same performance will be halved, at the same rate. So this law also applies to lenses that are mounted on a silicon chip; the product life cycle is short, typical 2-3 years, and the next generation needs to have an ever-higher performance. The pixels are getting smaller and smaller, so the resolution of the lenses has to follow. This means a continuous tightening of the tolerances in mold making, molding and assembly, and the improvements are needed at a high rate. In the presentation is described what challenges in ever increasing precision are encountered, developments that are carried out to meet those, and in what extent Philips HTP is successful reaching the required goals.

  2. Obituary: Ben Hawkins Moore, 1921-2003

    Science.gov (United States)

    Moore, James F.

    2004-12-01

    Ben H. Moore, emeritus professor of physics, astronomy and earth sciences at St. Cloud State University, Minnesota, died 7 November 2003, in South Padre Island, Texas. Ben was born 18 March 1921, in Kansas City, Missouri, to Fraser D. and Cora R. (Hawkins) Moore. Though his parents provided a strong guiding influence on Ben's development, Ben's career was impacted most clearly by his work as a student and research assistant for Allen Basset (Ben's father-in-law) at Park College. This relationship turned Ben's early interest in chemistry and biology toward a focus on physics. Ben received his undergraduate degree from Park College where he graduated Phi Delta Kappa. He received a MS in physics from Kansas State University. He also did post-masters work at the University of Kansas, the University of Colorado, the University of Washington and Temple University. In addition to his work as a research assistant, Ben taught at Park College as well as Washington Kansas High School, Wyandotte High School, and Kansas City Kansas Junior College before moving to St. Cloud State University in 1960. He retired from this teaching position in May 1982 but remained involved in activities of his department, including some teaching, through most of his years in retirement. Ben's accomplishments were mainly centered on his teaching. His development of courses and his rapport with students consistently brought praise from both his colleagues and his students. Above all, his work involved innovative development of the curriculum in the sciences at St. Cloud State. Soon after his arrival at the university, Ben took over the fledgling field geology course and continued to shape this offering into a program in earth sciences. The popularity of his classes, which attracted both general students and a growing number of majors, finally enabled the university to establish an earth sciences department in the late 1960's and Ben was the first chair of that department. In the mid-1960's Ben took

  3. Reactor Power Meter type SG-8

    Energy Technology Data Exchange (ETDEWEB)

    Glowacki, S W

    1981-01-01

    The report describes the principle and electronic circuits of the Reactor Power Meter type SG-8. The gamma radiation caused by the activity of the reactor first cooling circuit affectes the ionization chamber being the detector of the instrument. The output detector signal direct current is converted into the frequency of electric pulses by means of the current-to-frequency converter. The output converter frequency is measured by the digital frequency meter: the number of measured digits in time unit is proportional to the reactor power.

  4. What is Radical Behaviorism? A Review of Jay Moore's Conceptual Foundations of Radical Behaviorism

    Science.gov (United States)

    Baum, William M

    2011-01-01

    B. F. Skinner founded both radical behaviorism and behavior analysis. His founding innovations included: a versatile preparation for studying behavior; explicating the generic nature of stimulus and response; a pragmatic criterion for defining behavioral units; response rate as a datum; the concept of stimulus control; the concept of verbal behavior; and explicating the explanatory power of contingencies. Besides these achievements, however, Skinner also made some mistakes. Subsequent developments in radical behaviorist thought have attempted to remedy these mistakes. Moore's book presents a “party line” version of radical behaviorism. It focuses narrowly on a few of Skinner's concepts (mostly mentalism and verbal behavior) and contains no criticism of his mistakes. In fact, Moore adds a few mistakes of his own manufacture; for example, he insists that the mental realm does not exist—an unprovable and distracting assertion. The book's portrayal of behavior analysis would have been current around 1960; it mentions almost none of the developments since then. It also includes almost no developments in radical behaviorism since Skinner. Moore's book would give an unwary reader a highly distorted picture of contemporary behavior analysis and radical behaviorism.

  5. MULTICHANNEL DISTRIBUTION METER: A VERITABLE ...

    African Journals Online (AJOL)

    eobe

    Usually, commercial home owners preferred the installation of one or few .... communication (GSM) based solution were presented. The authors ... meters. The proposed meters in their work uses .... The most probable data entry component to ...

  6. Streamlining Smart Meter Data Analytics

    OpenAIRE

    Liu, Xiufeng; Nielsen, Per Sieverts

    2015-01-01

    Today smart meters are increasingly used in worldwide. Smart meters are the advanced meters capable of measuring customer energy consumption at a fine-grained time interval, e.g., every 15 minutes. The data are very sizable, and might be from different sources, along with the other social-economic metrics such as the geographic information of meters, the information about users and their property, geographic location and others, which make the data management very complex. On the other hand, ...

  7. Verification and Validation of the New Dynamic Mooring Modules Available in FAST v8: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wendt, Fabian; Robertson, Amy; Jonkman, Jason; Andersen, Morten T.

    2016-08-01

    The open-source aero-hydro-servo-elastic wind turbine simulation software, FAST v8, was recently coupled to two newly developed mooring dynamics modules: MoorDyn and FEAMooring. MoorDyn is a lumped-mass-based mooring dynamics module developed by the University of Maine, and FEAMooring is a finite-element-based mooring dynamics module developed by Texas A&M University. This paper summarizes the work performed to verify and validate these modules against other mooring models and measured test data to assess their reliability and accuracy. The quality of the fairlead load predictions by the open-source mooring modules MoorDyn and FEAMooring appear to be largely equivalent to what is predicted by the commercial tool OrcaFlex. Both mooring dynamic model predictions agree well with the experimental data, considering the given limitations in the accuracy of the platform hydrodynamic load calculation and the quality of the measurement data.

  8. Smart meter incorporating UWB technology

    NARCIS (Netherlands)

    Khan, T.A.; Khan, A.B.; Babar, M.; Taj, T.A.

    2014-01-01

    Smart Meter is a key element in the evolving concept of Smart Grid, which plays an important role in interaction between the consumer and the supplier. In general, the smart meter is an intelligent digital energy meter that measures the consumption of electrical energy and provides other additional

  9. Smart metering design and applications

    CERN Document Server

    Weranga, K S K; Chandima, D P

    2013-01-01

    Taking into account the present day trends and the requirements, this Brief focuses on smart metering of electricity for next generation energy efficiency and conservation. The contents include discussions on the smart metering concepts and existing technologies and systems as well as design and implementation of smart metering schemes together with detailed examples.

  10. Net metering: zero electricity bill

    International Nuclear Information System (INIS)

    Mangi, A.; Khan, Z.

    2011-01-01

    Worldwide move towards renewable energy sources, environmental concerns and decentralization of the power sector have made net metering an attractive option for power generation at small scale. This paper discusses the net metering, economical issues of renewable sources in Pakistan, technical aspects, installation suitability according to varying terrain, existing utility rules and formulation of legislation for net metering making it economically attractive. (author)

  11. Good standards for smart meters

    NARCIS (Netherlands)

    Hoenkamp, R.A.; Huitema, G.B.

    2012-01-01

    This paper examines what lessons can be learned from the rollout of smart meters in the Netherlands to improve the European smart meter standardization. This study is based on the case of the Dutch meter rollout which preparations started in 2005 but finally was delayed until 2011 by governmental

  12. Wind speed, wind direction, air temperature, wave energy spectra, significant wave height, dominant wave period and direction, peak wave period and direction, currents, temperature, conductivity, pressure, sigma-theta, river level, sonar readings, and backscatter data collected at Myrtle Beach in the North Atlantic Ocean from instruments deployed on MOORINGS using platforms NOAA Ship NANCY FOSTER and RV DAN MOORE from 2003-10-01 to 2004-05-01 (NODC Accession 0066109)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These bottom current, wave and associated observations were collected as part of a larger study to understand the physical processes that control the transport of...

  13. A radon meter chamber

    International Nuclear Information System (INIS)

    Carlsson, R.

    1990-01-01

    The meter consists of a cylindrical house with two openings, at the ends, one of which is equipped with an alpha particle detector and the other covered with a metal net. The house is manufactured in an isolating material e.g. plastic, with a metallic layer applied to all internal surfaces. The metallic layer and net are kept at a positive electric potential, compared to the alpha detector, in order to attract the radon daughters to the detector and achieve a high efficiency. (L.E.)

  14. Impact of mooring activities on carbon stocks in seagrass meadows

    KAUST Repository

    Serrano, O.; Ruhon, R.; Lavery, P. S.; Kendrick, G. A.; Hickey, S.; Masqué , P.; Arias-Ortiz, A.; Steven, A.; Duarte, Carlos M.

    2016-01-01

    Boating activities are one of the causes that threaten seagrass meadows and the ecosystem services they provide. Mechanical destruction of seagrass habitats may also trigger the erosion of sedimentary organic carbon (Corg) stocks, which may contribute to increasing atmospheric CO2. This study presents the first estimates of loss of Corg stocks in seagrass meadows due to mooring activities in Rottnest Island, Western Australia. Sediment cores were sampled from seagrass meadows and from bare but previously vegetated sediments underneath moorings. The Corg stores have been compromised by the mooring deployment from 1930s onwards, which involved both the erosion of existing sedimentary Corg stores and the lack of further accumulation of Corg. On average, undisturbed meadows had accumulated ~6.4 Kg Corg m−2 in the upper 50 cm-thick deposits at a rate of 34 g Corg m−2 yr−1. The comparison of Corg stores between meadows and mooring scars allows us to estimate a loss of 4.8 kg Corg m−2 in the 50 cm-thick deposits accumulated over ca. 200 yr as a result of mooring deployments. These results provide key data for the implementation of Corg storage credit offset policies to avoid the conversion of seagrass ecosystems and contribute to their preservation.

  15. Impact of mooring activities on carbon stocks in seagrass meadows

    KAUST Repository

    Serrano, O.

    2016-03-16

    Boating activities are one of the causes that threaten seagrass meadows and the ecosystem services they provide. Mechanical destruction of seagrass habitats may also trigger the erosion of sedimentary organic carbon (Corg) stocks, which may contribute to increasing atmospheric CO2. This study presents the first estimates of loss of Corg stocks in seagrass meadows due to mooring activities in Rottnest Island, Western Australia. Sediment cores were sampled from seagrass meadows and from bare but previously vegetated sediments underneath moorings. The Corg stores have been compromised by the mooring deployment from 1930s onwards, which involved both the erosion of existing sedimentary Corg stores and the lack of further accumulation of Corg. On average, undisturbed meadows had accumulated ~6.4 Kg Corg m−2 in the upper 50 cm-thick deposits at a rate of 34 g Corg m−2 yr−1. The comparison of Corg stores between meadows and mooring scars allows us to estimate a loss of 4.8 kg Corg m−2 in the 50 cm-thick deposits accumulated over ca. 200 yr as a result of mooring deployments. These results provide key data for the implementation of Corg storage credit offset policies to avoid the conversion of seagrass ecosystems and contribute to their preservation.

  16. Eilenberg–Moore Monoids and Backtracking Monad Transformers

    Directory of Open Access Journals (Sweden)

    Maciej Piróg

    2016-04-01

    Full Text Available We develop an algebraic underpinning of backtracking monad transformers in the general setting of monoidal categories. As our main technical device, we introduce Eilenberg–Moore monoids, which combine monoids with algebras for strong monads. We show that Eilenberg–Moore monoids coincide with algebras for the list monad transformer ('done right' known from Haskell libraries. From this, we obtain a number of results, including the facts that the list monad transformer is indeed a monad, a transformer, and an instance of the MonadPlus class. Finally, we construct an Eilenberg–Moore monoid of endomorphisms, which, via the codensity monad construction, yields a continuation-based implementation a la Hinze.

  17. Measuring set: Reactor Power Meter (type of SG-8), Reactor Energy Meter (type of SG-11) and Digital Dose Meter (type of SG-9) for reactor rigs operation. Zestaw pomiarowy: miernik mocy reaktora (typ SG-8), miernik energii reaktora (typ SG-11) oraz cyfrowy miernik dawki (typ SG-9) dla potrzeb eksploatacji sond reaktorowych

    Energy Technology Data Exchange (ETDEWEB)

    Glowacki, S W

    1982-01-01

    A measuring set consisting of the Reactor Power Meter, Reactor Energy Meter and Digital Dose Meter is described. The gamma radiation of water in the reactor primary cooling circuit reaches the ionisation chamber and involves the output current, driving the Reactor Power Meter and Reactor Energy Meter. The Digital Dose Meter is controlled by the output current of the self-powered detector mounted inside the reactor rig.

  18. A comparison of the impact of 'seagrass-friendly' boat mooring systems on Posidonia australis.

    Science.gov (United States)

    Demers, Marie-Claire A; Davis, Andrew R; Knott, Nathan A

    2013-02-01

    Permanent boat moorings have contributed to the decline of seagrasses worldwide, prompting the development of 'seagrass-friendly' moorings. We contrasted seagrass cover and density (predominantly Posidonia australis) in the vicinity of three mooring types and nearby reference areas lacking moorings in Jervis Bay, Australia. We examined two types of 'seagrass-friendly' mooring and a conventional 'swing' mooring. 'Swing' moorings produced significant seagrass scour, denuding patches of ~9 m radius. Seagrass-friendly 'cyclone' moorings produced extensive denuded patches (average radius of ~18 m). Seagrass-friendly 'screw' moorings, conversely, had similar seagrass cover to nearby reference areas. Our findings reinforce previous work highlighting the negative effects of 'swing' and 'cyclone' moorings. In contrast, the previously unstudied 'screw' moorings were highly effective. We conclude that regular maintenance of moorings and the monitoring of surrounding seagrass are required to ensure that 'seagrass-friendly' moorings are operating effectively. This is important, as following damage Posidonia will take many decades to recover. Copyright © 2012 Elsevier Ltd. All rights reserved.

  19. Liquid metal Flow Meter - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, C.; Hoogendoom, S.; Hudson, B.; Prince, J.; Teichert, K.; Wood, J.; Chase, K.

    2007-01-30

    Measuring the flow of liquid metal presents serious challenges. Current commercially-available flow meters use ultrasonic, electromagnetic, and other technologies to measure flow, but are inadequate for liquid metal flow measurement because of the high temperatures required by most liquid metals. As a result of the reactivity and high temperatures of most liquid metals, corrosion and leakage become very serious safety concerns. The purpose of this project is to develop a flow meter for Lockheed Martin that measures the flow rate of molten metal in a conduit.

  20. Development of the impedance void meter

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Moon Ki; Song, Chul Hwa; Won, Soon Yeon; Kim, Bok Deuk [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-06-01

    An impedance void meter is developed to measure the area-averaged void fraction. Its basic principle is based on the difference in the electrical conductivity between phases. Several methods of measuring void fraction are briefly reviewed and the reason why this type of void meter is chosen to develop is discussed. Basic principle of the measurement is thoroughly described and several design parameters to affect the overall function are discussed in detail. As example of applications is given for vertical air-water flow. It is shown that the current design has good dynamic response as well as very fine spatial resolution. (Author) 47 refs., 37 figs.

  1. Preliminary Analysis and Selection of Mooring Solution Candidates

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Delaney, Martin

    This report covers a preliminary analysis of mooring solutions candidates for four large floating wave energy converters. The work is part of the EUDP project “Mooring Solutions for Large Wave Energy Converters” and is the outcome of "Work Package 3: Preliminary Analysis". The report further...... compose the "Milestone 4: Report on results of preliminary analysis and selection of final candidates. The report is produced by Aalborg University with input from the partner WECs Floating Power Plant, KNSwing, LEANCON and Wave Dragon. Tension Technology International (TTI) has provided a significant...

  2. GAS METERING PUMP

    Science.gov (United States)

    George, C.M.

    1957-12-31

    A liquid piston gas pump is described, capable of pumping minute amounts of gas in accurately measurable quantities. The pump consists of a flanged cylindrical regulating chamber and a mercury filled bellows. Sealed to the ABSTRACTS regulating chamber is a value and having a gas inlet and outlet, the inlet being connected by a helical channel to the bellows. A gravity check valve is in the gas outlet, so the gas passes through the inlet and the helical channel to the bellows where the pumping action as well as the metering is accomplished by the actuation of the mercury filled bellows. The gas then flows through the check valve and outlet to any associated apparatus.

  3. Radiation dose rate meter

    International Nuclear Information System (INIS)

    Kronenberg, S.; Siebentritt, C.R.

    1981-01-01

    A combined dose rate meter and charger unit therefor which does not require the use of batteries but on the other hand produces a charging potential by means of a piezoelectric cylinder which is struck by a manually triggered hammer mechanism. A tubular type electrometer is mounted in a portable housing which additionally includes a geiger-muller (Gm) counter tube and electronic circuitry coupled to the electrometer for providing multi-mode operation. In one mode of operation, an rc circuit of predetermined time constant is connected to a storage capacitor which serves as a timed power source for the gm tube, providing a measurement in terms of dose rate which is indicated by the electrometer. In another mode, the electrometer indicates individual counts

  4. Multiphase flow metering: 4 years on

    Energy Technology Data Exchange (ETDEWEB)

    Falcone, G.; Hewitt, G.F.; Alimonti, C.; Harrison, B.

    2005-07-01

    Since the authors' last review in 2001 [1], the use of Multiphase Flow Metering (MFM) within the oil and gas industry continues to grow apace, being more popular in some parts of the world than others. Since the early 1990's, when the first commercial meters started to appear, there have been more than 1,600 field applications of MFM for field allocation, production optimisation and mobile well testing. As the authors predicted, wet gas metering technology has improved to such an extent that its use has rapidly increased worldwide. A ''who's who'' of the MFM sector is provided, which highlights the mergers in the sector and gives an insight into the meters and measurement principles available today. Cost estimates, potential benefits and reliability in the field of the current MFM technologies are revisited and brought up to date. Several measurements technologies have resurfaced, such as passive acoustic energy patterns, infrared wavelengths, Nuclear Magnetic Resonance (NMR) and Electrical Capacitance Tomography (ECT), and they are becoming commercial. The concept of ''virtual metering'', integrated with ''classical MFM'', is now widely accepted. However, sometimes the principles of the MFM measurements themselves are forgotten, submerged in the sales and marketing hype. (author) (tk)

  5. A Single-Point Mooring System for Direct Pumpout of Hopper Dredges

    National Research Council Canada - National Science Library

    1992-01-01

    This technical note describes a direct pumpout (DPO) system for use with hopper dredges, operating and design criteria for the DPO, initial mooring system designs, and the final DPO and mooring system selected...

  6. Moored surface buoy observations of the diurnal warm layer

    KAUST Repository

    Prytherch, J.

    2013-09-01

    An extensive data set is used to examine the dynamics of diurnal warming in the upper ocean. The data set comprises more than 4700 days of measurements at five sites in the tropics and subtropics, obtained from surface moorings equipped to make comprehensive meteorological, incoming solar and infrared radiation, and high-resolution subsurface temperature (and, in some cases, velocity) measurements. The observations, which include surface warmings of up to 3.4°C, are compared with a selection of existing models of the diurnal warm layer (DWL). A simple one-layer physical model is shown to give a reasonable estimate of both the magnitude of diurnal surface warming (model-observation correlation 0.88) and the structure and temporal evolution of the DWL. Novel observations of velocity shear obtained during 346 days at one site, incorporating high-resolution (1 m) upper ocean (5-15 m) acoustic Doppler current profile measurements, are also shown to be in reasonable agreement with estimates from the physical model (daily maximum shear model-observation correlation 0.77). Physics-based improvements to the one-layer model (incorporation of rotation and freshwater terms) are discussed, though they do not provide significant improvements against the observations reported here. The simplicity and limitations of the physical model are used to discuss DWL dynamics. The physical model is shown to give better model performance under the range of forcing conditions experienced across the five sites than the more empirical models. ©2013. American Geophysical Union. All Rights Reserved.

  7. Moored surface buoy observations of the diurnal warm layer

    KAUST Repository

    Prytherch, J.; Farrar, J. T.; Weller, R. A.

    2013-01-01

    An extensive data set is used to examine the dynamics of diurnal warming in the upper ocean. The data set comprises more than 4700 days of measurements at five sites in the tropics and subtropics, obtained from surface moorings equipped to make comprehensive meteorological, incoming solar and infrared radiation, and high-resolution subsurface temperature (and, in some cases, velocity) measurements. The observations, which include surface warmings of up to 3.4°C, are compared with a selection of existing models of the diurnal warm layer (DWL). A simple one-layer physical model is shown to give a reasonable estimate of both the magnitude of diurnal surface warming (model-observation correlation 0.88) and the structure and temporal evolution of the DWL. Novel observations of velocity shear obtained during 346 days at one site, incorporating high-resolution (1 m) upper ocean (5-15 m) acoustic Doppler current profile measurements, are also shown to be in reasonable agreement with estimates from the physical model (daily maximum shear model-observation correlation 0.77). Physics-based improvements to the one-layer model (incorporation of rotation and freshwater terms) are discussed, though they do not provide significant improvements against the observations reported here. The simplicity and limitations of the physical model are used to discuss DWL dynamics. The physical model is shown to give better model performance under the range of forcing conditions experienced across the five sites than the more empirical models. ©2013. American Geophysical Union. All Rights Reserved.

  8. How to use your peak flow meter

    Science.gov (United States)

    ... meter - how to use; Asthma - peak flow meter; Reactive airway disease - peak flow meter; Bronchial asthma - peak ... 2014:chap 55. National Asthma Education and Prevention Program website. How to use a peak flow meter. ...

  9. A Probabilistic Model of Meter Perception: Simulating Enculturation

    Directory of Open Access Journals (Sweden)

    Bastiaan van der Weij

    2017-05-01

    Full Text Available Enculturation is known to shape the perception of meter in music but this is not explicitly accounted for by current cognitive models of meter perception. We hypothesize that the induction of meter is a result of predictive coding: interpreting onsets in a rhythm relative to a periodic meter facilitates prediction of future onsets. Such prediction, we hypothesize, is based on previous exposure to rhythms. As such, predictive coding provides a possible explanation for the way meter perception is shaped by the cultural environment. Based on this hypothesis, we present a probabilistic model of meter perception that uses statistical properties of the relation between rhythm and meter to infer meter from quantized rhythms. We show that our model can successfully predict annotated time signatures from quantized rhythmic patterns derived from folk melodies. Furthermore, we show that by inferring meter, our model improves prediction of the onsets of future events compared to a similar probabilistic model that does not infer meter. Finally, as a proof of concept, we demonstrate how our model can be used in a simulation of enculturation. From the results of this simulation, we derive a class of rhythms that are likely to be interpreted differently by enculturated listeners with different histories of exposure to rhythms.

  10. Micro-gen metering solutions

    Energy Technology Data Exchange (ETDEWEB)

    Elland, J.; Dickson, J.; Cranfield, P.

    2003-07-01

    This report summarises the results of a project to investigate the regulation of domestic electricity metering work and identify the most economic options for micro-generator installers to undertake work on electricity meters. A micro-generation unit is defined as an energy conversion system converting non-electrical energy into electrical energy and can include technologies such as photovoltaic systems, small-scale wind turbines, micro-hydroelectric systems, and combined heat and power systems. Details of six tasks are given and cover examination of the existing framework and legal documentation for metering work, the existing technical requirements for meter operators, meter operator personnel accreditation, appraisal of options for meter changes and for micro-generation installation, document change procedures, industry consultation, and a review of the costs implications of the options.

  11. De Minimis Thresholds for Federal Building Metering Appropriateness

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, Jordan W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-03-31

    The U.S. Department of Energy (DOE) is required by statute and Presidential Memorandum to establish guidelines for agencies to meter their Federal buildings for energy (electricity, natural gas, and steam) and water. See 42 U.S.C. § 8253(e). DOE issued guidance in February 2006 on the installation of electric meters in Federal buildings. A recent update to the 2006 guidance accounts for more current metering practices within the Federal Government. The updated metering guidance specifies that all Federal buildings shall be considered “appropriate” for energy or water metering unless identified for potential exclusion. In developing the updated guidance to carry out the statue, Congress also directed DOE to (among other things) establish exclusions from the metering requirements based on the de minimis quantity of energy use of a Federal building, industrial process, or structure. This paper discusses the method used to identify de minimis values.

  12. Investigating water meter performance in developing countries: A ...

    African Journals Online (AJOL)

    High levels of water losses in distribution systems are the main challenge that water utilities in developing countries currently face. The water meter is an essential tool for both the utility and the customers to measure and monitor consumption. When metering is inefficient and coupled with low tariffs, the financial ...

  13. The Solar Energy Trifecta: Solar + Storage + Net Metering | State, Local,

    Science.gov (United States)

    and Tribal Governments | NREL The Solar Energy Trifecta: Solar + Storage + Net Metering The Solar Energy Trifecta: Solar + Storage + Net Metering February 12, 2018 by Benjamin Mow Massachusetts (DPU) seeking an advisory ruling on the eligibility of pairing solar-plus-storage systems with current

  14. 77 FR 40586 - Draft NIST Interagency Report (NISTIR) 7823, Advanced Metering Infrastructure Smart Meter...

    Science.gov (United States)

    2012-07-10

    ...-01] Draft NIST Interagency Report (NISTIR) 7823, Advanced Metering Infrastructure Smart Meter... Technology (NIST) seeks comments on Draft NISTIR 7823, Advanced Metering Infrastructure Smart Meter... conformance test requirements for the firmware upgradeability process for the Advanced Metering Infrastructure...

  15. Michael Moore kaevati kohtusse pettuse eest / Mari Rebane

    Index Scriptorium Estoniae

    Rebane, Mari

    2006-01-01

    Dokumentaalfilm "9/11 Fahrenheiti" ("Fahrenheit 9/11") : režissöör Michael Moore : USA 2004. Iraagi sõja invaliidistunud veteran andis režissööri kohtusse teda kujutavate flmikaadrite loata ja tenentsliku kasutamise pärast

  16. Picture Books about Blacks: An Interview with Opal Moore.

    Science.gov (United States)

    MacCann, Donnarae; Richard, Olga

    1991-01-01

    Presents an interview with Opal Moore, who discusses Black imagery in picture books published in the last four years and the institutions that circulate that imagery. Topics discussed include the issue of race pride; interracial themes; appropriate illustrations; African versus African-American books; and the roles of publishers, books reviewers,…

  17. Experimental testing of moorings for large floating wave energy converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    2016-01-01

    This paper presents the outcome of a test campaign, which investigates the behaviour of a synthetic mooring system applied to the Floating Power Plant wave energy converter. The study investigates the motion and tension response under operational and extreme sea states expected at the deployment ...

  18. Moore on Mercury the planet and the missions

    CERN Document Server

    Moore, Patrick

    2007-01-01

    In his inimitable style, Patrick Moore describes Mercury. He tells of those who have observed it over the centuries, and the past, present and future space missions to it. In doing so he has written the most up-to-date book about Mercury for amateur astronomers.

  19. Innovative technologies to accurately model waves and moored ship motions

    CSIR Research Space (South Africa)

    van der Molen, W

    2010-09-01

    Full Text Available Late in 2009 CSIR Built Environment in Stellenbosch was awarded a contract to carry out extensive physical and numerical modelling to study the wave conditions and associated moored ship motions, for the design of a new iron ore export jetty for BHP...

  20. Proceedings of the 2006 smart metering conference and expo

    International Nuclear Information System (INIS)

    2006-01-01

    Ontario's smart metering program was launched as part of a general demand response management strategy to improve energy conservation in the province. Smart metering will help consumers to control their electricity bills through conservation and demand response, and will allow consumers to better manage their energy consumption and use it more effectively during cheaper, off-peak times of day. Smart metering systems measure how much electricity a customer uses on an hourly basis, and data is transferred daily to local electricity distributors. Toronto Hydro will have close to 200,000 smart meters installed by the end of 2006. By 2010, Toronto will be North America's largest urban centre to have made the full transition to smart metering technology across its entire base. This conference provided an update of Toronto Hydro's smart metering project, as well as details of their demand response program. Presentations were given by a variety of experts in information technology as well as electric power industry leaders North American demand and response metering strategies were reviewed, as well as various initiatives in advanced metering infrastructure (AMI). Security risks associated with smart metering environments were reviewed. An evaluation of the current regulatory environment was presented along with a discussion of smart metering standards and compatibility issues. New metering technologies were presented as well as various associated demand side management tools. Smart metering pilot programs and initiatives were discussed, and best practices in smart metering were evaluated. Twenty-nine presentations were given at the conference, 13 of which have been indexed separately for inclusion in this database. refs., tabs., figs

  1. Metering apparatus and tariffs for electricity supply

    International Nuclear Information System (INIS)

    1990-01-01

    Conference papers presented cover system economies and tariff structure with papers on pricing of electricity and new metering technologies. Other topics reviewed include metering apparatus design, electronic metering apparatus and solid phase metering technology. Meter data retrieval, bulk supply metering, test equipment and maintenance, and legal requirements and standards are discussed. (author)

  2. Comparison of Mooring Loads in Survivability Mode on the Wave Dragon Wave Energy Converter Obtained by a Numerical Model and Experimental Data

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Muliawan, Made Jaya; Gao, Zhen

    2012-01-01

    The Wave Dragon Wave Energy Converter is ready to be up-scaled to commercial size. The design and feasibility analysis of a 1.5 MW pre-commercial unit to be deployed at the DanWEC test center in Hanstholm, Denmark, is currently ongoing. With regard to the mooring system, the design has to be carr......The Wave Dragon Wave Energy Converter is ready to be up-scaled to commercial size. The design and feasibility analysis of a 1.5 MW pre-commercial unit to be deployed at the DanWEC test center in Hanstholm, Denmark, is currently ongoing. With regard to the mooring system, the design has...... to be carried out numerically, through coupled analyses of alternative solutions. The present study deals with the preliminary hydrodynamic characterization of Wave Dragon needed in order to calibrate the numerical model to be used for the mooring design. A hydrodynamic analysis of the small scale model...

  3. Preliminary physical, nutrients, biological, meteorological, and other data from bottle casts, CTD casts, ADCP casts, moored current meters, and meteorological sensors from the GYRE from as part of the Texas-Louisiana Shelf Circulation and Transport Processes Study (LATEX PART A) from 04 November 1992 to 05 August 1994 (NODC Accession 9500054)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Preliminary physical, nutrients, biological, meteorological, and other data from bottle casts, CTD casts, ADCP casts, and meteorological sensors from the GYRE from...

  4. Mobile metering. Efficient charging infrastructure. Charging stations in the public, semi-public and private room; Mobile Metering. Effiziente Ladeinfrastruktur. Ladepunkte im oeffentlichen, halboeffentlichen und privaten Raum

    Energy Technology Data Exchange (ETDEWEB)

    Hoerhammer, Marcus; Zayer, Peter [Voltaris GmbH, Merzig (Germany); Hechtfischer, Knut; Pawlitschek, Frank [Ubitricity Gesellschaft fuer Verteilte Energiesysteme mbH, Berlin (Germany)

    2013-01-28

    Mobile metering shifts the power metering and data communication from the stationary charging stationary into the charger cable or into the vehicle - and thus creates a mobile metering point. Thus, the charging stations are reduced to technically simple system sockets. These system sockets do not cause current expenses and make the charging infrastructure affordable and economically viable.

  5. Streamlining Smart Meter Data Analytics

    DEFF Research Database (Denmark)

    Liu, Xiufeng; Nielsen, Per Sieverts

    2015-01-01

    of the so-called big data possible. This can improve energy management, e.g., help utilities improve the management of energy and services, and help customers save money. As this regard, the paper focuses on building an innovative software solution to streamline smart meter data analytic, aiming at dealing......Today smart meters are increasingly used in worldwide. Smart meters are the advanced meters capable of measuring customer energy consumption at a fine-grained time interval, e.g., every 15 minutes. The data are very sizable, and might be from different sources, along with the other social......-economic metrics such as the geographic information of meters, the information about users and their property, geographic location and others, which make the data management very complex. On the other hand, data-mining and the emerging cloud computing technologies make the collection, management, and analysis...

  6. Developing an area-wide system for coordinated ramp meter control.

    Science.gov (United States)

    2008-12-01

    Ramp metering has been broadly accepted and deployed as an effective countermeasure : against both recurrent and non-recurrent congestion on freeways. However, many current ramp : metering algorithms tend to improve only freeway travels using local d...

  7. Extrapolation of extreme response for different mooring line systems of floating wave energy converters

    DEFF Research Database (Denmark)

    Ambühl, Simon; Sterndorff, Martin; Sørensen, John Dalsgaard

    2014-01-01

    Mooring systems for floating wave energy converters (WECs) are a major cost driver. Failure of mooring systems often occurs due to extreme loads. This paper introduces an extrapolation method for extreme response which accounts for the control system of a WEC that controls the loads onto...... measurements from lab-scaled WEPTOS WEC are taken. Different catenary anchor leg mooring (CALM) systems as well as single anchor legmooring (SALM)mooring systemsare implemented for a dynamic simulation with different number of mooring lines. Extreme tension loads with a return period of 50 years are assessed...... for the hawser as well as at the different mooring lines. Furthermore, the extreme load impact given failure of one mooring line is assessed and compared with extreme loads given no system failure....

  8. Service-oriented advanced metering infrastructure for smart grids

    NARCIS (Netherlands)

    Chen, S.; Lukkien, J.J.; Zhang, L.

    2011-01-01

    Advanced Metering Infrastructure (AMI) enables smart grids to involve power consumers in the business process of power generation transmission, distribution and consumption. However, the participant of consumers challenges the current power systems with system integration and cooperation and

  9. Service-oriented advanced metering infrastructure for smart grids

    NARCIS (Netherlands)

    Chen, S.; Lukkien, J.J.; Zhang, L.

    2010-01-01

    Advanced Metering Infrastructure (AMI) enables smart grids to involve power consumers in the business process of power generation, transmission, distribution and consumption. However, the participant of consumers challenges the current power systems with system integration and cooperation and

  10. Beyond revenue metering -- a new age for automatic meter reading

    Energy Technology Data Exchange (ETDEWEB)

    Chebra, R. J. [RJC Consulting L.L.C., PQ (Canada)

    2002-10-01

    Advanced metering, data management, and communications possibilities of automated meter reading are explored. Applications in the area of demand side management, including load reduction, peak shaving and load shifting, new tariff structures based on the 'time of use incentive/penalty' approach, and information grade metering are emphasized. Based on trends and expectations, it is predicted that AMR will continue to experience rapid growth and deployment as new services are made available to the mass market. For example, technological advances will enable the industry to make 'time of use metering ' more attractive and beneficial to residential consumers, and embedded intelligence will make it possible to achieve more holistic energy environments.

  11. Physical, chemical, current profile, water pressure, sea surface temperature, meteorological, and other data from current meters, bottle casts, pressure gauges, meteorological sensors, current meters, and other instruments from the ANDRE NIZERY and other platforms from the TOGA Area - Atlantic as part of the Seasonal Response of the Equatorial Atlantic Experiment/Francais Ocean Et Climat Dans L'Atlantique Equatorial (SEQUAL/FOCAL) project from 1964-01-01 to 1985-12-31 (NODC Accession 8700150)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, chemical, current profile, water pressure, sea surface temperature, meteorological, and other data were collected from the ANDRE NIZERY and other platforms...

  12. Fault Tolerant Position-mooring Control for Offshore Vessels

    DEFF Research Database (Denmark)

    Blanke, Mogens; Nguyen, Trong Dong

    2018-01-01

    Fault-tolerance is crucial to maintain safety in offshore operations. The objective of this paper is to show how systematic analysis and design of fault-tolerance is conducted for a complex automation system, exemplified by thruster assisted Position-mooring. Using redundancy as required....... Functional faults that are only detectable, are rendered isolable through an active isolation approach. Once functional faults are isolated, they are handled by fault accommodation techniques to meet overall control objectives specified by class requirements. The paper illustrates the generic methodology...... by a system to handle faults in mooring lines, sensors or thrusters. Simulations and model basin experiments are carried out to validate the concept for scenarios with single or multiple faults. The results demonstrate that enhanced availability and safety are obtainable with this design approach. While...

  13. Political Cinema and Culture industry: the work of Michael Moore

    OpenAIRE

    Cristiane Toledo Maria

    2015-01-01

    This article aims to reflect upon the production of the American filmmaker Michael Moore, proposing as a central question the relationship established between art and politics in a historical moment which, on one side, points to the crisis of capitalism and, on the other side, to the political fragmentation of the working class. Focusing on the analysis of the documentaries Roger & Me (1989) and Capitalism: a love story (2009), this article is an attempt to understand the method developed by ...

  14. Moore(anists and Wittgenstein on Radical Skepticism

    Directory of Open Access Journals (Sweden)

    Nicola Claudio Salvatore

    2016-12-01

    Full Text Available In this paper, I present and criticize a number of influential contemporary anti-skeptical strategies inspired by G.E. Moore’s “proof of an external world”. I argue that these accounts cannot represent a valid response to skeptical worries. Furthermore, drawing on Wittgenstein’s criticisms of Moore, I argue that Radical skeptical hypotheses should be considered nonsensical combinations of signs, excluded from our epistemic practices.

  15. AI, Native Supercomputing and The Revival of Moore's Law

    OpenAIRE

    Lu, Chien-Ping

    2017-01-01

    Based on Alan Turing's proposition on AI and computing machinery, which shaped Computing as we know it today, the new AI computing machinery should comprise a universal computer and a universal learning machine. The later should understand linear algebra natively to overcome the slowdown of Moore's law. In such a universal learnig machine, a computing unit does not need to keep the legacy of a universal computing core. The data can be distributed to the computing units, and the results can be...

  16. Revealing household characteristics from smart meter data

    International Nuclear Information System (INIS)

    Beckel, Christian; Sadamori, Leyna; Staake, Thorsten; Santini, Silvia

    2014-01-01

    Utilities are currently deploying smart electricity meters in millions of households worldwide to collect fine-grained electricity consumption data. We present an approach to automatically analyzing this data to enable personalized and scalable energy efficiency programs for private households. In particular, we develop and evaluate a system that uses supervised machine learning techniques to automatically estimate specific “characteristics” of a household from its electricity consumption. The characteristics are related to a household's socio-economic status, its dwelling, or its appliance stock. We evaluate our approach by analyzing smart meter data collected from 4232 households in Ireland at a 30-min granularity over a period of 1.5 years. Our analysis shows that revealing characteristics from smart meter data is feasible, as our method achieves an accuracy of more than 70% over all households for many of the characteristics and even exceeds 80% for some of the characteristics. The findings are applicable to all smart metering systems without making changes to the measurement infrastructure. The inferred knowledge paves the way for targeted energy efficiency programs and other services that benefit from improved customer insights. On the basis of these promising results, the paper discusses the potential for utilities as well as policy and privacy implications. - Highlights: • Many household characteristics can be automatically inferred from smart meter data. • We develop a system to infer employment status and number of occupants, for instance. • We evaluate our system analyzing data collected from 4232 households in Ireland. • The insights enable personalized and scalable efficiency campaigns for utilities. • Energy efficiency measures must be complemented by privacy protection

  17. Automated borehole gravity meter system

    International Nuclear Information System (INIS)

    Lautzenhiser, Th.V.; Wirtz, J.D.

    1984-01-01

    An automated borehole gravity meter system for measuring gravity within a wellbore. The gravity meter includes leveling devices for leveling the borehole gravity meter, displacement devices for applying forces to a gravity sensing device within the gravity meter to bring the gravity sensing device to a predetermined or null position. Electronic sensing and control devices are provided for (i) activating the displacement devices, (ii) sensing the forces applied to the gravity sensing device, (iii) electronically converting the values of the forces into a representation of the gravity at the location in the wellbore, and (iv) outputting such representation. The system further includes electronic control devices with the capability of correcting the representation of gravity for tidal effects, as well as, calculating and outputting the formation bulk density and/or porosity

  18. Enabling More than Moore: Accelerated Reliability Testing and Risk Analysis for Advanced Electronics Packaging

    Science.gov (United States)

    Ghaffarian, Reza; Evans, John W.

    2014-01-01

    For five decades, the semiconductor industry has distinguished itself by the rapid pace of improvement in miniaturization of electronics products-Moore's Law. Now, scaling hits a brick wall, a paradigm shift. The industry roadmaps recognized the scaling limitation and project that packaging technologies will meet further miniaturization needs or ak.a "More than Moore". This paper presents packaging technology trends and accelerated reliability testing methods currently being practiced. Then, it presents industry status on key advanced electronic packages, factors affecting accelerated solder joint reliability of area array packages, and IPC/JEDEC/Mil specifications for characterizations of assemblies under accelerated thermal and mechanical loading. Finally, it presents an examples demonstrating how Accelerated Testing and Analysis have been effectively employed in the development of complex spacecraft thereby reducing risk. Quantitative assessments necessarily involve the mathematics of probability and statistics. In addition, accelerated tests need to be designed which consider the desired risk posture and schedule for particular project. Such assessments relieve risks without imposing additional costs. and constraints that are not value added for a particular mission. Furthermore, in the course of development of complex systems, variances and defects will inevitably present themselves and require a decision concerning their disposition, necessitating quantitative assessments. In summary, this paper presents a comprehensive view point, from technology to systems, including the benefits and impact of accelerated testing in offsetting risk.

  19. Minimizing Restraint and Seclusion in Schools: A Response to Beaudoin and Moore.

    Science.gov (United States)

    Walker, Virginia L; Pinkelman, Sarah E

    2018-06-01

    Increasing efforts have been made in the field of special education to identify positive, evidence-based practices (EBPs) to meet the needs of students who engage in problem behavior, with a major goal being to eliminate or limit the use of reactive measures such as restraint and seclusion ( Snell & Walker, 2014 ). Various stakeholders, including families and self-advocates, have voiced concerns about the dangers of restraint and seclusion and the lack of protection afforded to students who engage in severe problem behavior. In the previous article in this issue of Intellectual and Developmental Disabilities, Beaudoin and Moore (2018) echo these concerns in their account of a family's experience with restraint as told from the perspective of a father whose son was subjected to restraint, resulting in a number of adverse short- and long-term consequences that affected the entire family. In response to Beaudoin and Moore, we provide readers with a brief review of the current status of restraint and seclusion in school settings and evidence-based strategies that can be used to address severe problem behavior and reduce the need for restraint and seclusion. For readers interested in exploring restraint and seclusion in greater depth, we suggest recent work by Trader and colleagues (2017) . We also have outlined guidelines for behavior support planning that should be considered by various stakeholders as educators work toward establishing safe and supportive school environments that address a wide range of student behavioral needs.

  20. Coupled Mooring Analyses for the WEC-Sim Wave Energy Converter Design Tool: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Sirnivas, Senu; Yu, Yi-Hsiang; Hall, Matthew; Bosma, Bret

    2016-07-01

    A wave-energy-converter-specific time-domain modeling method (WEC-Sim) was coupled with a lumped-mass-based mooring model (MoorDyn) to improve its mooring dynamics modeling capability. This paper presents a verification and validation study on the coupled numerical method. First, a coupled model was built to simulate a 1/25 model scale floating power system connected to a traditional three-point catenary mooring with an angle of 120 between the lines. The body response and the tension force on the mooring lines at the fairlead in decay tests and under regular and irregular waves were examined. To validate and verify the coupled numerical method, the simulation results were compared to the measurements from a wave tank test and a commercial code (OrcaFlex). Second, a coupled model was built to simulate a two-body point absorber system with a chain-connected catenary system. The influence of the mooring connection on the point absorber was investigated. Overall, the study showed that the coupling of WEC-Sim and the MoorDyn model works reasonably well for simulating a floating system with practical mooring designs and predicting the corresponding dynamic loads on the mooring lines. Further analyses on improving coupling efficiency and the feasibility of applying the numerical method to simulate WEC systems with more complex mooring configuration are still needed.

  1. Observed low-frequency currents in the deep mid-Arabian sea

    Digital Repository Service at National Institute of Oceanography (India)

    Shetye, S.R.; Shenoi, S.S.C.; Sundar, D.

    -frequency currents in the area. Although the spectra for the six time series have similar shapes, their energy levels differ. There was no significant coherence between upper and the lower currents at any mooring, nor between currents at adjacent moorings. Energies...

  2. Secure Metering Schemes

    Science.gov (United States)

    Blundo, Carlo; Cimato, Stelvio; Masucci, Barbara

    The current trend on the Internet suggests that the majority of revenues of web sites come from the advertising potential of the World Wide Web. Advertising is arguably the type of commercial information exchange of the greatest economic importance in the real world. Indeed, advertising is what funds most other forms of information exchange, including radio stations, television stations, cable networks, magazines, and newspapers. According to the figures provided by the Internet Advertising Bureau [24] and Price Waterhouse Coopers [43], advertising revenue results for the first 9 months of 2004 totaled slightly over 7.0 billion dollars.

  3. Energy Theft in the Advanced Metering Infrastructure

    Science.gov (United States)

    McLaughlin, Stephen; Podkuiko, Dmitry; McDaniel, Patrick

    Global energy generation and delivery systems are transitioning to a new computerized "smart grid". One of the principle components of the smart grid is an advanced metering infrastructure (AMI). AMI replaces the analog meters with computerized systems that report usage over digital communication interfaces, e.g., phone lines. However, with this infrastructure comes new risk. In this paper, we consider adversary means of defrauding the electrical grid by manipulating AMI systems. We document the methods adversaries will use to attempt to manipulate energy usage data, and validate the viability of these attacks by performing penetration testing on commodity devices. Through these activities, we demonstrate that not only is theft still possible in AMI systems, but that current AMI devices introduce a myriad of new vectors for achieving it.

  4. Using Smart Meters Data for Energy Management Operations and Power Quality Monitoring in a Microgrid

    DEFF Research Database (Denmark)

    Palacios-Garcia, Emilio J.; Diaz, Enrique Rodriguez; Anvari-Moghaddam, Amjad

    2017-01-01

    Smart metering devices have become an essential part in the development of the current electrical network toward the paradigm of Smart Grid. These meters present in most of the cases, functionalities whose analysis capabilities go further beyond the basic automated meter readings for billing purp...

  5. Status of Net Metering: Assessing the Potential to Reach Program Caps

    Energy Technology Data Exchange (ETDEWEB)

    Heeter, J.; Gelman, R.; Bird, L.

    2014-09-01

    Several states are addressing the issue of net metering program caps, which limit the total amount of net metered generating capacity that can be installed in a state or utility service territory. In this analysis, we examine net metering caps to gain perspective on how long net metering will be available in various jurisdictions under current policies. We also surveyed state practices and experience to understand important policy design considerations.

  6. Comparison and Sensitivity Investigations of a CALM and SALM Type Mooring System for Wave Energy Converters

    Directory of Open Access Journals (Sweden)

    Arthur Pecher

    2014-02-01

    Full Text Available A quasi-static analysis and sensitivity investigation of two different mooring configurations—a single anchor leg mooring (SALM and a three-legged catenary anchor leg system (CALM—is presented. The analysis aims to indicate what can be expected in terms of requirements for the mooring system size and stiffness. The two mooring systems were designed for the same reference load case, corresponding to a horizontal design load at the wave energy converter (WEC of 2000 kN and a water depth of 30 m. This reference scenario seems to be representative for large WECs operating in intermediate water depths, such as Weptos, Wave Dragon and many others, including reasonable design safety factors. Around this reference scenario, the main influential parameters were modified in order to investigate their impact on the specifications of the mooring system, e.g. the water depth, the horizontal design load, and a mooring design parameter.

  7. Topology-Based Estimation of Missing Smart Meter Readings

    Directory of Open Access Journals (Sweden)

    Daisuke Kodaira

    2018-01-01

    Full Text Available Smart meters often fail to measure or transmit the data they record when measuring energy consumption, known as meter readings, owing to faulty measuring equipment or unreliable communication modules. Existing studies do not address successive and non-periodical missing meter readings. This paper proposes a method whereby missing readings observed at a node are estimated by using circuit theory principles that leverage the voltage and current data from adjacent nodes. A case study is used to demonstrate the ability of the proposed method to successfully estimate the missing readings over an entire day during which outages and unpredictable perturbations occurred.

  8. Effects of single moor baths on physiological stress response and psychological state: a pilot study

    Science.gov (United States)

    Stier-Jarmer, M.; Frisch, D.; Oberhauser, C.; Immich, G.; Kirschneck, M.; Schuh, A.

    2017-11-01

    Moor mud applications in the form of packs and baths are widely used therapeutically as part of balneotherapy. They are commonly given as therapy for musculoskeletal disorders, with their thermo-physical effects being furthest studied. Moor baths are one of the key therapeutic elements in our recently developed and evaluated 3-week prevention program for subjects with high stress level and increased risk of developing a burnout syndrome. An embedded pilot study add-on to this core project was carried out to assess the relaxing effect of a single moor bath. During the prevention program, 78 participants received a total of seven moor applications, each consisting of a moor bath (42 °C, 20 min, given between 02:30 and 05:20 p.m.) followed by resting period (20 min). Before and after the first moor application in week 1, and the penultimate moor application in week 3, salivary cortisol was collected, blood pressure and heart rate were measured, and mood state (Multidimensional Mood State Questionnaire) was assessed. A Friedman test of differences among repeated measures was conducted. Post hoc analyses were performed using the Wilcoxon signed-rank test. A significant decrease in salivary cortisol concentration was seen between pre- and post-moor bath in week 1 ( Z = -3.355, p = 0.0008). A non-significant decrease was seen between pre- and post-moor bath in week 3. Mood state improved significantly after both moor baths. This pilot study has provided initial evidence on the stress-relieving effects of single moor baths, which can be a sensible and recommendable therapeutic element of multimodal stress-reducing prevention programs. The full potential of moor baths still needs to be validated. A randomized controlled trial should be conducted comparing this balneo-therapeutic approach against other types of stress reduction interventions.

  9. Characteristics of low-frequency components of the near-bottom current in the Chinese Pioneer Area

    Institute of Scientific and Technical Information of China (English)

    LIANG Chujin; HOU Yijun; CHEN Qi; DONG Ruzhou; DONG Lixian

    2004-01-01

    Two deep-sea moorings were deployed respectively in the east area and the west area of Chinese Pioneer Area (CPA) in the tropic east Pacific to monitor the regional deep-sea dynamics below 600 meters above bottom (mab) from July 1997 to Oct. 1999. Results of statistics, spectral estimate and correlation analysis of the low-passed velocity data show that time scales of low-frequency components of the near-bottom currents are 25~120 days, in which 51-day period dominates the lower band of the frequency domain. Topographic features have obvious effect on low-frequency currents below 50 mab; modulations of the bottom-intensified sheared mean flow to the low-frequency currents are the dynamic mechanism of the frequency shift that occurs in both the east-area and the west-area.

  10. Low Cost Digital Vibration Meter.

    Science.gov (United States)

    Payne, W Vance; Geist, Jon

    2007-01-01

    This report describes the development of a low cost, digital Micro Electro Mechanical System (MEMS) vibration meter that reports an approximation to the RMS acceleration of the vibration to which the vibration meter is subjected. The major mechanical element of this vibration meter is a cantilever beam, which is on the order of 500 µm in length, with a piezoresistor deposited at its base. Vibration of the device in the plane perpendicular to the cantilever beam causes it to bend, which produces a measurable change in the resistance of a piezoresistor. These changes in resistance along with a unique signal-processing scheme are used to determine an approximation to the RMS acceleration sensed by the device.

  11. Smart Metering System for Microgrids

    DEFF Research Database (Denmark)

    Palacios-Garcia, Emilio; Guan, Yajuan; Savaghebi, Mehdi

    2015-01-01

    suppliers, but they can also play a big role in the control of the Microgrid since the recorded power and energy profiles can be integrated in energy management systems (EMS). In addition, basic power quality (PQ) disturbance can de detected and reported by some advanced metering systems. Thus, this paper...... will expose an example of Smart Meters integration in a Microgrid scenario, which is the Intelligent Microgrid Lab of Aalborg University (AAU). To do this, first the installation available in the Microgrid Lab will be introduced. Then, three different test scenarios and their respective results...... will be presented, regarding the capabilities of this system and the advantages of integration the Smart Meters information in the Microgrid control....

  12. Arduino based radiation survey meter

    International Nuclear Information System (INIS)

    Rahman, Nur Aira Abd; Lombigit, Lojius; Abdullah, Nor Arymaswati; Azman, Azraf; Dolah, Taufik; Jaafar, Zainudin; Mohamad, Glam Hadzir Patai; Ramli, Abd Aziz Mhd; Zain, Rasif Mohd; Said, Fazila; Khalid, Mohd Ashhar; Taat, Muhamad Zahidee; Muzakkir, Amir

    2016-01-01

    This paper presents the design of new digital radiation survey meter with LND7121 Geiger Muller tube detector and Atmega328P microcontroller. Development of the survey meter prototype is carried out on Arduino Uno platform. 16-bit Timer1 on the microcontroller is utilized as external pulse counter to produce count per second or CPS measurement. Conversion from CPS to dose rate technique is also performed by Arduino to display results in micro Sievert per hour (μSvhr −1 ). Conversion factor (CF) value for conversion of CPM to μSvhr −1 determined from manufacturer data sheet is compared with CF obtained from calibration procedure. The survey meter measurement results are found to be linear for dose rates below 3500 µSv/hr

  13. Arduino based radiation survey meter

    Energy Technology Data Exchange (ETDEWEB)

    Rahman, Nur Aira Abd, E-mail: nur-aira@nm.gov.my; Lombigit, Lojius; Abdullah, Nor Arymaswati; Azman, Azraf; Dolah, Taufik; Jaafar, Zainudin; Mohamad, Glam Hadzir Patai; Ramli, Abd Aziz Mhd; Zain, Rasif Mohd; Said, Fazila; Khalid, Mohd Ashhar; Taat, Muhamad Zahidee [Malaysian Nuclear Agency, 43000, Bangi, Selangor (Malaysia); Muzakkir, Amir [Sinaran Utama Teknologi Sdn Bhd, 43650, Bandar Baru Bangi, Selangor (Malaysia)

    2016-01-22

    This paper presents the design of new digital radiation survey meter with LND7121 Geiger Muller tube detector and Atmega328P microcontroller. Development of the survey meter prototype is carried out on Arduino Uno platform. 16-bit Timer1 on the microcontroller is utilized as external pulse counter to produce count per second or CPS measurement. Conversion from CPS to dose rate technique is also performed by Arduino to display results in micro Sievert per hour (μSvhr{sup −1}). Conversion factor (CF) value for conversion of CPM to μSvhr{sup −1} determined from manufacturer data sheet is compared with CF obtained from calibration procedure. The survey meter measurement results are found to be linear for dose rates below 3500 µSv/hr.

  14. Transitioning Submersible Chemical Analyzer Technologies for Sustained, Autonomous Observations from Profiling Moorings, Gliders and other AUVs

    National Research Council Canada - National Science Library

    Hanson, Alfred K; Donaghay, Percy L; Moore, Casey; Arrieta, Richard

    2005-01-01

    The long term goal is to transition existing prototype autonomous profiling nutrient analyzers into commercial products that can be readily deployed on autonomous profiling moorings, coastal gliders...

  15. Transitioning Submersible Chemical Analyzer Technologies for Sustained, Autonomous Observations From Profiling Moorings, Gliders and other AUVs

    National Research Council Canada - National Science Library

    Hanson, Alfred K; Donaghay, Percy L; Moore, Casey; Arrieta, Richard

    2006-01-01

    The long term goal is to transition existing prototype autonomous profiling nutrient analyzers into commercial products that can be readily deployed on autonomous profiling moorings, coastal gliders...

  16. Metering in the gas supply sector; Metering in der Gasversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Wernekinck, U. [RWE Westfalen-Weser-Ems, Recklinghausen (Germany)

    2007-10-15

    The new conditions of competition in the gas supply sector have strongly increased the requirements on gas grid operators. Mainly an exact gas metering and -accouting will become more and more important. The systems and procedures are presented in detail in this contribution. (GL)

  17. Microprocessor controlled digital period meter

    International Nuclear Information System (INIS)

    Keefe, D.J.; McDowell, W.P.; Rusch, G.K.

    1980-01-01

    A microprocessor controlled digital period meter has been developed and tested operationally on a reactor at Argonne National Laboratory. The principle of operation is the mathematical relationship between asymptotic periods and pulse counting circuitry. This relationship is used to calculate and display the reactor periods over a range of /plus or minus/1 second to /plus or minus/999 seconds. The time interval required to update each measurement automatically varies from 8 seconds at the lowest counting rates to 2 seconds at higher counting rates. The paper will describe hardware and software design details and show the advantages of this type of Period Meter over the conventional circuits. 1 ref

  18. G. E. Moore: Kritika metafyzické etiky

    OpenAIRE

    Kolomý, Vojtěch

    2014-01-01

    The aim of this bachelor thesis is to expose the criticism of the Metaphysical Ethics that G. E. Moore presents in Chapter IV of his Principia Ethica. The core of the criticism is the so called naturalistic fallacy and therefore it is necessary to first explain what is meant by this fallacy. In the first part of the thesis it is shown that the naturalistic fallacy lies in confusing the property that we call "good" with another property that accompanies it, but is not identical with it. In the...

  19. Effect of passing vessels on a moored ship

    Energy Technology Data Exchange (ETDEWEB)

    Lean, G H; Price, W A

    1977-11-01

    The effect of passing vessels on a moored ship was investigated by a series of model tests carried out at the Hydraulics Research Station for the Esso Petroleum Co. Ltd., transportation department in connection with their oil jetty at Milford Haven. A main conclusion was that the forces appeared to be due to the pressure gradients associated with the pattern of flow that accompanies the passing ship rather than with the wave system. Slack lines are to be avoided, and some relief in maximum line loads can be achieved by increasing the pretension. The results included the effects of passing vessel speed and ship clearance and draft.

  20. Justification of the Utility of Introducing Smart Meters in Latvia

    Science.gov (United States)

    Kunickis, M.; Dandens, A.; Bariss, U.

    2015-12-01

    Automatic data reading from smart meters is being developed in many parts of the world, including Latvia. The key drivers for that are developments of smart technologies and economic benefits for consumers. Deployment of smart meters could be launched in a massive scale. Several pilot projects were implemented to verify the feasibility of smart meters for individual consumer groups. Preliminary calculations indicate that installation of smart meters for approximately 23 % of electricity consumers would be economically viable. Currently, the data for the last two years is available for an in-depth mathematical analysis. The continuous analysis of consumption data would be established, when more measurements from smart meters are available. The extent of introduction of smart meters should be specified during this process in order to gain the maximum benefit for the whole society (consumers, grid companies, state authorities), because there are still many uncertain and variable factors. For example, it is necessary to consider statistical load variations by hour, dependence of electricity consumption on temperature fluctuations, consumer behaviour and demand response to market signals to reduce electricity consumption in the short and long term, consumer's ambitions and capability to install home automation for regulation of electricity consumption. To develop the demand response, it is necessary to analyse the whole array of additional factors, such as expected cost reduction of smart meters, possible extension of their functionality, further development of information exchange systems, as well as standard requirements and different political and regulatory decisions regarding the reduction of electricity consumption and energy efficiency.

  1. Development programme update for a socket solution offering a highly efficient termination of polyester mooring tethers

    International Nuclear Information System (INIS)

    Firth, Kevin M.; Calverley, Steve; Quintas, Manuel Pedro

    2000-01-01

    Bridon have previously developed a patented 'Socket and Spike' design for polyester tethers comprising a parallel array of seven sub-ropes. This phase of the development was successfully completed, subsequently Bridon have embarked on a new phase which aims to increase the efficiency of the socket and address the assembly problems that have been identified. The development has continued with the 'Socket and Spike' principle but a unique termination method has been devised such that each sub-rope is terminated in it is own mini-socket and pre-loaded prior to fitting into the main socket ensuring zero slippage and equal transfer of the mooring load. The sub-ropes are nested into the main socket body resulting in a socket termination that lighter, more efficient and easier to handle than the current method of spliced eye incorporating a steel spool and shackle. (author)

  2. Arrival metering fuel consumption analysis

    Science.gov (United States)

    2011-01-01

    Arrival metering is a method of time-based traffic management that is used by the Federal Aviation Administration to plan and manage streams of arrival traffic during periods of : high demand at busy airports. The Traffic Management Advisor is an aut...

  3. The Thirty-Meter Telescope

    Indian Academy of Sciences (India)

    2016-01-27

    Jan 27, 2016 ... The Thirty-Meter Telescope international observatory will enable transformational observations over the full cosmic timeline all the way from the first luminous objects in the Universe to the planets and moons of our own solar system. To realize its full scientific potential, TMT will be equipped with a powerful ...

  4. Rate meter design and construction

    International Nuclear Information System (INIS)

    Peon Aguirre, R.; Fonseca Araujo, W.H.

    1989-01-01

    An electric diagram is proposed to build a geiger detector Rate Meter, to count gamma radiation and X ray. This idea was made up with the prototype construction which has a five scales analogue display (100, 300, 1000, 3000 and 10000 c/s). (Author)

  5. Temperature profile and other data collected using moored buoy in the Pacific Ocean (30-N to 30-S) as part of the International Decade of Ocean Exploration / North Pacific Experiment (IDOE/NORPAX) project from 06 November 1977 to 24 March 1978 (NODC Accession 8200053)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Air pressure, current, wind and temperature time series data were collected from moored buoys from TOGA Area in Pacific (30 N to 30 S). Buoy data from the equatorial...

  6. Smart metering. Conformance tests for electricity meters; Smart Metering. Konformitaetstests an Stromzaehlern

    Energy Technology Data Exchange (ETDEWEB)

    Bormann, Matthias; Pongratz, Siegfried [VDE Pruef- und Zertifizierungsinstitut, Offenbach (Germany)

    2012-07-01

    Introduction of communication technologies into today's energy network enables the interworking between the domains of smart metering, smart grid, smart home and e-mobility as well as the creation and provisioning of new innovative services such as efficient load adjustment. Due to this convergence the new energy networks are becoming increasingly complex. Ensuring the interworking between all network elements (e.g. electricity meters, gateways) in these smart energy networks is of utmost importance. To this end conformance and interoperability tests have to be defined to ensure that services work as expected. (orig.)

  7. Metering: EU policy and implications for fuel poor households

    International Nuclear Information System (INIS)

    Darby, Sarah J.

    2012-01-01

    Fuel poverty is a function of household energy consumption, income, and the cost of delivered energy. The paper discusses ways in which current EU policy on the development of ‘smart’ metering could affect fuel poor households. The main focus is on developments in electricity metering and the development of ‘active demand’ and smart grids, so that demand can be matched closely with available supply. Advances in metering and related technologies open the way to time-of-use charging, easier switching between suppliers and between credit payment and prepayment, direct load control of some end-uses by the utility, greater scope for microgeneration, and improved consumption feedback for customers. These options open up both uncertainties and risks. The paper offers definitions and discussion of various functions of smart metering, summarizes the EU policy background, and considers some possible equity implications of rolling out a new generation of meters. There follows an assessment of potential implications to the fuel poor of changes to metering, based on a review of the literature on energy feedback, tariffing, and supplier–customer relationships. Much of the discussion is based on the UK experience, with examples from other EU member states and, where appropriate, from other parts of the world. - Highlights: ► Smart meters are part of general upgrading of electricity and gas networks. ► EU policy is to roll out the meters to 80%+ of the population by 2020. ► Improved feedback and prepayment metering may benefit the fuel poor. ► Remote disconnection and data privacy are issues for all consumers. ► We need careful assessment of potential gains and losses to the fuel poor.

  8. Physical oceanographic mooring data (temperature, salinity, velocity including ADCP ice tracking) collected from Bering Strait Moorings A2, A3, A4 in Bering Strait from 2014-07-02 to 2015-07-05 (NCEI Accession 0155760)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This is an archive of data from moorings deployed in Bering Strait from summer 2014 to summer 2015. Mooring deployments were funded by the NSF-Arctic Observing...

  9. Experimental study on the structural and mooring loads of the WEPTOS Wave Energy Converter

    DEFF Research Database (Denmark)

    Pecher, Arthur Francois Serge; Kofoed, Jens Peter

    This report presents the results of an experimental study that was performed on small scale model that was a replication of the full-scale Weptos WEC intended for DanWEC. During these tests, after optimising the mooring solution, various loads were measured that occur in the structure and mooring...

  10. 75 FR 38019 - Safety Zone; Fixed Mooring Balls, South of Barbers Pt. Harbor Channel, Oahu, HI

    Science.gov (United States)

    2010-07-01

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2010-0457] RIN 1625-AA00 Safety Zone; Fixed Mooring Balls, South of Barbers Pt. Harbor Channel, Oahu, HI AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: Due to the placement of six fixed mooring balls in an...

  11. Verification and Validation of Multisegmented Mooring Capabilities in FAST v8

    DEFF Research Database (Denmark)

    Andersen, Morten Thøtt; Wendt, Fabian F.; Robertson, Amy N.

    2016-01-01

    The quasi-static and dynamic mooring modules of the open-source aero-hydro-servo-elastic wind turbine simulation software, FAST v8, have previously been verified and validated, but only for mooring arrangements consisting of single lines connecting each fairlead and anchor. This paper extends the...

  12. Spin texture readout of a Moore-Read topological quantum register

    NARCIS (Netherlands)

    Romers, J.C.; Schoutens, K.

    2012-01-01

    We study the composite charged spin texture (CST) over the Moore-Read quantum Hall state that arises when a collection of elementary CSTs is moved to the same location. Following an algebraic approach based on the characteristic pair correlations of the Moore-Read state, we find that the spin

  13. Charged spin textures over the Moore-Read quantum Hall state

    NARCIS (Netherlands)

    Romers, J.C.; Huijse, L.; Schoutens, K.

    2011-01-01

    We study the composite Charged Spin Texture (CST) over the Moore-Read quantum Hall state that arises when a collection of elementary CSTs are moved to the same location. Following an algebraic approach based on the characteristic pair correlations of the Moore- Read state, we and that the resulting

  14. Return to the far side of planet Moore! rambling through observations, friendships and antics of sir Patrick Moore

    CERN Document Server

    Mobberley, Martin

    2015-01-01

    The result of an exhaustive study of Sir Patrick Moore’s observations of the Moon and planets for more than 60 years, this book is a fantastic companion to the extremely popular, “It Came From Outer Space Wearing an RAF Blazer!” written by the same author.  Moore recorded his telescopic observations in his logbooks, which are reproduced and described here in detail, along with his sketches and notes. In this light, the author discusses the factors that caused Moore to switch from lunar observing to planetary and variable star observing.  He has also included personal recollections and humorous anecdotes from Moore’s friends and acquaintances, as well as a look at his best loved books. Further chapters describe Moore’s foreign travels and correspondence with those back home. Lastly, the author has not neglected a few of Moore’s most memorable television and radio appearances, which are examined along with a close up of what it was like to visit Moore’s beloved home of Farthings in Selsey. Essen...

  15. Development and applications of new type isotope level-meters for cement factories

    International Nuclear Information System (INIS)

    Yang Shiqing; Min Hainian; Zhang Zhaoqing; Fu Heping; Dang Congjun; Wang Jingmin; Xia Junming

    1998-01-01

    According to the situation of current domestic switch isotope level-meters used for the level measurement and control in cement factories, a new type isotope level-meter is developed. The level-meter includes digit display circuit, count detection and control circuit and two ways control export, its response time is less than 1 second. The quenching circuit in the detector lengthens the using lifespan of G-M counter. The application in the factories indicates that the level-meter has the advantages of sensitive, strong anti-disturbance, reliable and adjustment simplicity. The use of the level-meter can make the better economy benefit and society benefit

  16. Physical oceanographic data collected from moorings deployed in the Bering Strait from July 2005 to July 2006 (NODC Accession 0013223)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Moorings were deployed from summer 2005 to summer 2006. Each data file contains the data from one instrument-year. The listed year is the year in which the mooring...

  17. Investigation of Separate Meter-In Separate Meter-Out Control Strategies for Systems with Over Centre Valves

    DEFF Research Database (Denmark)

    Pedersen, Henrik C.; Andersen, Torben Ole; Hansen, Rico Hjerm

    2010-01-01

    to overcome this problem, but it typically implies higher energy consumption and/or decreased control performance. With the development of robust sensors and new valve types with separate meter-in, separate meter-out control it is, however, possible to overcome these stability problems in a much more...... intelligent way, also adding increased functionality to the system. The focus of the current paper is therefore on investigation of different control strategies for Separate Meter-In Separate Meter-Out (SMISMO) control of general single axis hydraulic system with a differential cylinder and an over......-centre valve included. The paper first presents a general model of the system considered, which is experimentally verified. This is followed by a discussion of different control strategies and their implications. For each of the control strategies controllers are described, taking into account the dynamics...

  18. Verification and Validation of Multisegmented Mooring Capabilities in FAST v8: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, Morten T.; Wendt, Fabian; Robertson, Amy; Jonkman, Jason; Hall, Matthew

    2016-08-01

    The quasi-static and dynamic mooring modules of the open-source aero-hydro-servo-elastic wind turbine simulation software, FAST v8, have previously been verified and validated, but only for mooring arrangements consisting of single lines connecting each fairlead and anchor. This paper extends the previous verification and validation efforts to focus on the multisegmented mooring capability of the FAST v8 modules: MAP++, MoorDyn, and the OrcaFlex interface. The OC3-Hywind spar buoy system tested by the DeepCwind consortium at the MARIN ocean basin, which includes a multisegmented bridle layout of the mooring system, was used for the verification and validation activities.

  19. The Moore Method and the Constructivist Theory of Learning: Was R. L. Moore a Constructivist?

    Science.gov (United States)

    Barrett, Lida K.; Long, B. Vena

    2012-01-01

    Constructivism is currently a hotly debated topic, with proponents and opponents equally adamant and emotional with respect to their viewpoints. Many misconceptions exist on both sides of the debate, and misuses of terminology and attribution are rampant. Constructivism is a theory of learning, not a particular approach to instruction and not a…

  20. Understanding pressurized metered dose inhaler performance.

    Science.gov (United States)

    Ivey, James W; Vehring, Reinhard; Finlay, Warren H

    2015-06-01

    Deepening the current understanding of the factors governing the performance of the pressurized metered dose inhaler (pMDI) has the potential to benefit patients by providing improved drugs for current indications as well as by enabling new areas of therapy. Although a great deal of work has been conducted to this end, our knowledge of the physical mechanisms that drive pMDI performance remains incomplete. This review focuses on research into the influence of device and formulation variables on pMDI performance metrics. Literature in the areas of dose metering, atomization and aerosol evolution and deposition is covered, with an emphasis on studies of a more fundamental nature. Simple models which may be of use to those developing pMDI products are summarized. Although researchers have had good success utilizing an empirically developed knowledge base to predict pMDI performance, such knowledge may not be applicable when pursuing innovations in device or formulation technology. Developing a better understanding of the underlying mechanisms is a worthwhile investment for those working to enable the next generation of pMDI products.

  1. Solid state semiconductor detectorized survey meter

    International Nuclear Information System (INIS)

    Okamoto, Eisuke; Nagase, Yoshiyuki; Furuhashi, Masato

    1987-01-01

    Survey meters are used for measurement of gamma ray dose rate of the space and the surface contamination dencity that the atomic energy plant and the radiation facility etc. We have recently developed semiconductor type survey meter (Commercial name: Compact Survey Meter). This survey meter is a small-sized dose rate meter with excellent function. The special features are using semiconductor type detector which we have developed by our own technique, stablar wide range than the old type, long life, and easy to carry. Now we introduce the efficiency and the function of the survey meter. (author)

  2. Federal Building Metering Guidance (per 42 U.S.C. 8253(e), Metering of Energy Use)

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-11-01

    Guidance defines which federal buildings are appropriate to meter, provides metering prioritization recommendations for agencies with limited resources, and discusses the requirement for agencies to submit metering implementation plans to the U.S. Department of Energy.

  3. Validation of a Tool for the Initial Dynamic Design of Mooring Systems for Large Floating Wave Energy Converters

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    2017-01-01

    -source boundary element method code NEMOH and the commercial time-domain mooring analysis tool OrcaFlex. The work used the wind/wave energy converter Floating Power Plant as a case study, which is defined as a large floating structure with a passive mooring system. The investigated mooring consists of a three...

  4. Investigation of the environmental radioactivity around the mooring port

    International Nuclear Information System (INIS)

    Tanigawa, Yoshio

    1976-01-01

    Here are the main data for radioactivity examination performed in 1975 at Mutsu port, the mooring port of atomic energy vessel ''Mutsu''. No abnormality were observed in space γ ray dose ratio, and integrated doses measured by the thermofluorescence dosimeter at three monitoring posts in the port (G M tube) and three monitoring station in Mutsu City. A serial measurement of radioactivity concentration in sea water did not show any abnormality, either. Samples were taken from the surface soil of the ground, the bottom of the rivers, river water, drinking water, and milk and measured the total radioactivity by a gas flow counter. The measurement of the total β-radioactivity and radio nuclides analysis were carried out in sea water, the soil from the bottom of the sea and sea products. Abnormality considered to be caused by ''Mutsu'' did not observed at all. (Kobatake, H.)

  5. Characterization of radiofrequency field emissions from smart meters.

    Science.gov (United States)

    Tell, Richard A; Kavet, Robert; Mezei, Gabor

    2013-01-01

    This study presents measurement data that describe radiofrequency emission levels and patterns from smart meters (rated nominally at 1 W) currently deployed in Pacific Gas and Electric Company's service territory in northern California. The smart meters in our investigation could not be set to operate continuously and required a Field Service Unit to induce short periods of emitted fields. To obtain peak field data under both laboratory and ambient conditions, a spectrum analyzer scanned across the 83 transmitting channels between 902 and 928 MHz used by the smart meter on a random frequency-hopping basis. To obtain data describing temporal emission patterns, the analyzer operated in scope mode. Duty cycle was estimated using transmit data acquired by the system operator from over 88,000 m. Instantaneous peak fields at 0.3 m in front of the meters were no more than 15% of the US Federal Communications Commission (FCC) exposure limit for the general public, and 99.9% of the meters operated with a duty cycle of 1.12% or less during the sampling period. In a sample of measurements in six single-detached residences equipped with individual smart meters, no interior measurement of peak field exceeded 1% of the FCC's general public exposure limit.

  6. Smart meter data: Balancing consumer privacy concerns with legitimate applications

    International Nuclear Information System (INIS)

    McKenna, Eoghan; Richardson, Ian; Thomson, Murray

    2012-01-01

    Smart meters are being rolled out in large numbers throughout the world, with proponents claiming they are a critical step in the transition to a low-carbon economy. Yet there are significant unresolved negative reactions to smart meters, principally based on the concern that smart meters might be used to infer the private activities that occur within a dwelling. Though smart meter data is classified as personal data, and as such protected under existing data protection frameworks in the EU, there are relevant exceptions, notably where the data is required for legitimate applications associated with the performance of 'regulated duties'. This paper contributes to this debate by examining the data requirements for some of the proposed applications of smart meter data within the electricity supply industry, and investigates whether the use of personal data can be minimized or even avoided. The discussion includes system balancing, demand reduction, demand response and distribution network operation and planning, and indicates that, for most of these applications, the requirements for personal data can indeed be minimized. 'Privacy friendly' alternatives are discussed. - Highlights: ▶ Current smart meter systems provide a strong indication of occupancy. ▶ This will have important implications for external and internal home privacy. ▶ Personal data requirements within legitimate applications are discussed. ▶ 'Privacy friendly' techniques are suggested that minimize the use of personal data. ▶ Distribution network operator has strongest claim for data from each household.

  7. NUCLEAR MIXING METERS FOR CLASSICAL NOVAE

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, Keegan J.; Iliadis, Christian; Downen, Lori; Champagne, Art [Department of Physics and Astronomy, University of North Carolina at Chapel Hill, Chapel Hill, NC 27599-3255 (United States); José, Jordi [Departament de Física i Enginyeria Nuclear, EUETIB, Universitat Politècnica de Catalunya, E-08036 Barcelona (Spain)

    2013-11-10

    Classical novae are caused by mass transfer episodes from a main-sequence star onto a white dwarf via Roche lobe overflow. This material possesses angular momentum and forms an accretion disk around the white dwarf. Ultimately, a fraction of this material spirals in and piles up on the white dwarf surface under electron-degenerate conditions. The subsequently occurring thermonuclear runaway reaches hundreds of megakelvin and explosively ejects matter into the interstellar medium. The exact peak temperature strongly depends on the underlying white dwarf mass, the accreted mass and metallicity, and the initial white dwarf luminosity. Observations of elemental abundance enrichments in these classical nova events imply that the ejected matter consists not only of processed solar material from the main-sequence partner but also of material from the outer layers of the underlying white dwarf. This indicates that white dwarf and accreted matter mix prior to the thermonuclear runaway. The processes by which this mixing occurs require further investigation to be understood. In this work, we analyze elemental abundances ejected from hydrodynamic nova models in search of elemental abundance ratios that are useful indicators of the total amount of mixing. We identify the abundance ratios ΣCNO/H, Ne/H, Mg/H, Al/H, and Si/H as useful mixing meters in ONe novae. The impact of thermonuclear reaction rate uncertainties on the mixing meters is investigated using Monte Carlo post-processing network calculations with temperature-density evolutions of all mass zones computed by the hydrodynamic models. We find that the current uncertainties in the {sup 30}P(p, γ){sup 31}S rate influence the Si/H abundance ratio, but overall the mixing meters found here are robust against nuclear physics uncertainties. A comparison of our results with observations of ONe novae provides strong constraints for classical nova models.

  8. Cross-cultural differences in meter perception.

    Science.gov (United States)

    Kalender, Beste; Trehub, Sandra E; Schellenberg, E Glenn

    2013-03-01

    We examined the influence of incidental exposure to varied metrical patterns from different musical cultures on the perception of complex metrical structures from an unfamiliar musical culture. Adults who were familiar with Western music only (i.e., simple meters) and those who also had limited familiarity with non-Western music were tested on their perception of metrical organization in unfamiliar (Turkish) music with simple and complex meters. Adults who were familiar with Western music detected meter-violating changes in Turkish music with simple meter but not in Turkish music with complex meter. Adults with some exposure to non-Western music that was unmetered or metrically complex detected meter-violating changes in Turkish music with both simple and complex meters, but they performed better on patterns with a simple meter. The implication is that familiarity with varied metrical structures, including those with a non-isochronous tactus, enhances sensitivity to the metrical organization of unfamiliar music.

  9. Net metering in British Columbia : white paper

    International Nuclear Information System (INIS)

    Berry, T.

    2003-01-01

    Net metering was described as being the reverse registration of an electricity customer's revenue meter when interconnected with a utility's grid. It is a provincial policy designed to encourage small-distributed renewable power generation such as micro-hydro, solar energy, fuel cells, and larger-scale wind energy. It was noted that interconnection standards for small generation is an important issue that must be addressed. The British Columbia Utilities Commission has asked BC Hydro to prepare a report on the merits of net metering in order to support consultations on a potential net metering tariff application by the utility. This report provides information on net metering with reference to experience in other jurisdictions with net metering, and the possible costs and benefits associated with net metering from both a utility and consumer perspective. Some of the barriers and policy considerations for successful implementation of net metering were also discussed. refs., tabs., figs

  10. Versatile operation meter for nuclear information

    International Nuclear Information System (INIS)

    Huang Yong; Xiao Yabin; Wang Shuyuan; Shu Jingfang; Di Shaoliang; Wu Hongbin

    1995-01-01

    This paper states a low-cost, small-volume, multi-function, reproducible and new model intelligent nuclear electronic meter. It's hardware and Software were detailed and the 137 Cs spectrum with this meter was presented

  11. Calibration of dose meters used in radiotherapy

    International Nuclear Information System (INIS)

    1979-01-01

    This manual is a practical guide, not a comprehensive textbook, to the instrumentation and procedures necessary to calibrate a radiation dose meter used in clinical practice against a secondary standard dose meter

  12. Hardware Design of a Smart Meter

    OpenAIRE

    Ganiyu A. Ajenikoko; Anthony A. Olaomi

    2014-01-01

    Smart meters are electronic measurement devices used by utilities to communicate information for billing customers and operating their electric systems. This paper presents the hardware design of a smart meter. Sensing and circuit protection circuits are included in the design of the smart meter in which resistors are naturally a fundamental part of the electronic design. Smart meters provides a route for energy savings, real-time pricing, automated data collection and elimina...

  13. Intelligent Metering for Urban Water: A Review

    OpenAIRE

    Rodney Stewart; Stuart White; Candice Moy; Ariane Liu; Pierre Mukheibir; Damien Giurco; Thomas Boyle

    2013-01-01

    This paper reviews the drivers, development and global deployment of intelligent water metering in the urban context. Recognising that intelligent metering (or smart metering) has the potential to revolutionise customer engagement and management of urban water by utilities, this paper provides a summary of the knowledge-base for researchers and industry practitioners to ensure that the technology fosters sustainable urban water management. To date, roll-outs of intelligent metering have been ...

  14. Screening of Available Tools for Dynamic Mooring Analysis of Wave Energy Converters

    Directory of Open Access Journals (Sweden)

    Jonas Bjerg Thomsen

    2017-06-01

    Full Text Available The focus on alternative energy sources has increased significantly throughout the last few decades, leading to a considerable development in the wave energy sector. In spite of this, the sector cannot yet be considered commercialized, and many challenges still exist, in which mooring of floating wave energy converters is included. Different methods for assessment and design of mooring systems have been described by now, covering simple quasi-static analysis and more advanced and sophisticated dynamic analysis. Design standards for mooring systems already exist, and new ones are being developed specifically forwave energy converter moorings, which results in other requirements to the chosen tools, since these often have been aimed at other offshore sectors. The present analysis assesses a number of relevant commercial software packages for full dynamic mooring analysis in order to highlight the advantages and drawbacks. The focus of the assessment is to ensure that the software packages are capable of fulfilling the requirements of modeling, as defined in design standards and thereby ensuring that the analysis can be used to get a certified mooring system. Based on the initial assessment, the two software packages DeepC and OrcaFlex are found to best suit the requirements. They are therefore used in a case study in order to evaluate motion and mooring load response, and the results are compared in order to provide guidelines for which software package to choose. In the present study, the OrcaFlex code was found to satisfy all requirements.

  15. An assessment of the Italian smart gas metering program

    International Nuclear Information System (INIS)

    Di Castelnuovo, Matteo; Fumagalli, Elena

    2013-01-01

    The introduction of smart metering is one of the core elements in recent European policies targeting environmental sustainability and competitiveness of energy markets. Following the roll-out of smart electricity meters, in 2008 the Italian regulator designed an ambitious deployment program also for smart gas meters, that was recently modified in both scope and timing. This paper assesses Italy's original and current deployment plans, with a specific focus on the results of its cost–benefit analysis. In light of the evidence derived from the literature, we observe that the case for the roll-out of smart gas meters in Italy was not supported by a strong emphasis on energy savings but rather focused on increasing efficiency of the Italian gas market; in this respect, we argue that options other than smart gas metering should also be considered. Moreover the Italian cost–benefit analysis, which mostly dealt with the potential cost savings for distributors and suppliers, led to ambiguous results in terms of net present values; thus, we believe that an updated assessment would be extremely useful. Finally, in terms of technological choices, our analysis positively evaluates the regulator's recent proposal to consider a dual-fuel solution for the mass market deployment. - Highlights: • This paper assesses Italy's original and current deployment plans for smart gas meters. • The plan was not supported by a strong emphasis on energy savings. • A focus on increasing efficiency of the Italian gas market appears only partly justifiable. • The business case for adopting smart gas meters should be updated. • Our analysis positively evaluates the a dual-fuel solution for the mass market

  16. Currents, attenuation, temperature, and conductivity from moorings at the deep-sea municipal sewage disposal site in the North Atlantic Ocean continental rise off New York and New Jersey deployed from the OCEANUS and ATLANTIS between September 20th, 1989 and August 3rd, 1990 (NODC Accession 0066008)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Near-bottom current measurements to understand the fate and transport of sludge discharged at the sea surface. Sludge from the New York/New Jersey metropolitan...

  17. Long term monitoring of currents, conductivity, temperature, salinity, sigma-theta, pressure, waves, chlorophyll A, oxygen, and meteorology from moorings deployed at two locations in Massachusetts Bay from the platforms WHITE HEATH, ASTERIAS, CHRISTOPHER ANDREW, MARCUS HANNA, ABBIE BURGESS, LOONEY, and ARGO MAINE from January 1, 1986 to February 8, 2006 (NODC Accession 0060062)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Measurements of currents and other oceanographic properties were made at two locations to understand the transport and long-term fate of sediments and associated...

  18. Smart Metering. Technological, economic and legal aspects. 2. ed.; Smart Metering. Technologische, wirtschaftliche und juristische Aspekte des Smart Metering

    Energy Technology Data Exchange (ETDEWEB)

    Koehler-Schute, Christiana (ed.)

    2010-07-01

    Smart metering comprises more than just meter technology, and the use of information and communication technologies is indispensable. Processes, roles and business models must be reconsidered as further challenges arise in the context of smart metering. For one, there is the operator of the metering points. Secondly, there is the end user who is in the role of an active market partner. Further, there is smart metering as a basic technology, e.g. for smart grids and smart homes. In spite of the need for action, many utilities are reluctant to introduce smart metering. Reasons for this are the cost, a lack of defined standards, and an unclear legal situation. On the other hand, smart metering offers potential for grids and distribution that should be made use of. The authors discuss all aspects of the subject. The point out the chances and limitations of smart metering and present their own experience. [German] Smart Metering geht weit ueber die Zaehlertechnologie hinaus und der Einsatz von Informations- und Kommunikationstechnologien ist unabdingbar. Damit einhergehend muessen Prozesse, Rollen und auch Geschaeftsmodelle neu durchdacht werden. Denn weitere Herausforderungen stehen im direkten Zusammenhang mit Smart Metering. Das ist zum einen die Rolle des Messstellenbetreibers / Messdienstleisters. Das ist zum anderen der Endnutzer, dem die Rolle des aktiven Marktpartners zugedacht wird. Das ist des Weiteren das Smart Metering als Basistechnologie beispielsweise fuer Smart Grid und Smart Home. Trotz des Handlungsdrucks stehen viele Unternehmen der Energiewirtschaft dem Smart Metering zurueckhaltend gegenueber. Drei gewichtige Gruende werden ins Feld gefuehrt: die Kostenfrage, nicht definierte Standards und die in vielen Bereichen ungeklaerte Gesetzeslage. Demgegenueber bietet das Smart Metering Potenziale fuer Netz und Vertrieb, die es zu nutzen gilt. Die Autoren setzen sich in ihren Beitraegen mit diesen Themen auseinander, zeigen Chancen, aber auch Grenzen des

  19. Fundamental principles of rotary displacement meters

    Energy Technology Data Exchange (ETDEWEB)

    Rosen, J. [Schlumberger Industries, Owenton, KY (United States)

    1995-12-01

    The gas meter exists to continually and accurately measure the volume of gas supplied over the complete flow range of the load. In effect the gas meter serves as the {open_quotes}cash register{close_quotes} of the gas industry; its accurate and dependable performance ensures fair dealings for both the supplier and the user. An investment both in and of itself, the gas meter should be chosen as a function of its usefullness both over the short term and the long term. Thus in addition to initial cost, one must take into account various associated factors, costs and benefits, including the following: Design Characteristics Application, suitability, Meter features and options, Operation constraints, Installation, Service and maintenance, Repair and replacement, Life expectancy, Compatibility with complimentary products, Correcting devices, Remote reading capabilities, Data generation and gathering, Upgradeabilty. This paper will look at one positive displacement meter, the Rotary meter, and address the fundamentals principals of the technology as well as looking at some of the benefits derived from its application. Rotary positive displacement meters were introduced at the end of last century. Used primarily for metering transmission sized loads, the meters` measuring capabilities have extended to cover nearly all areas of distribution with exception of domestic applications. Rotary meters are available in rated capacities from 800 cfh to 102,000 cfh and operating pressures from 175 PSIG to 1440 PSIG. The use of rotary meters on load ranges in the 800 to 10,000 cfh category has increased and is replacing the use of diaphragm meters because of the smaller relative size of rotaries, and improvements in rangeabilities in the last few years. Turbine meters are usually the meter of choice on loads over 16,000 cfh unless a meter with high rangeability is required because of varying load characteristics, in which case a large foot mounted rotary might still be selected.

  20. The 59 meter dash - automatic rapid meter reading in Ronneby

    Energy Technology Data Exchange (ETDEWEB)

    Ottosson, Hans [Enersearch (Sweden); Selander, Lars [Linkoeping Univ. (Sweden); Bergstroem, Ulrika [Sydkraft (Sweden)

    1999-02-01

    As a result of deregulation of the telecommunications and energy markets, the utilities in Sweden see opportunities to use power lines for additional profitable applications such as transmission of data; the technology is called Power Line Telecommunications (PLT). The potential advantages are said to be 'massive'. The potential applications include remote security, automatic meter reading, load management and 'smart' home automation. A small scale feasibility study has been carried out in Ronneby in Sweden where it was shown that load management and efficiency improvements can reduce the costs of supplying the town with heat and electricity by about 3%. The Ronneby trial is described in detail. Since Scandinavia makes use of weather-dependent renewables for much of its power generation, load management is an attractive potential application of PLT. (UK)

  1. Reconsidering the smart metering data collection frequency for distribution state estimation

    OpenAIRE

    Chen, Qipeng; Kaleshi, Dritan; Armour, Simon; Fan, Zhong

    2015-01-01

    The current UK Smart Metering Technical Specification requires smart meter readings to be collected once a day, primarily to support accurate billing without violating users' privacy. In this paper we consider the use of Smart Metering data for Distribution State Estimation (DSE), and compare the effectiveness of daily data collection strategy with a more frequent, half-hourly SM data collection strategy. We first assess the suitability of using the data for load forecasting at Low Voltage (L...

  2. Aperture meter for the Large Hadron Collider

    International Nuclear Information System (INIS)

    Mueller, G.J.; Fuchsberger, K.; Redaelli, S.

    2012-01-01

    The control of the high intensity beams of the CERN Large Hadron Collider (LHC) is particular challenging and requires a good modeling of the machine and monitoring of various machine parameters. During operation it is crucial to ensure a minimal distance between the beam edge and the aperture of sensitive equipment, e.g. the superconducting magnets, which in all cases must be in the shadow of the collimator's that protect the machine. Possible dangerous situations must be detected as soon as possible. In order to provide the operator with information about the current machine bottlenecks an aperture meter application was developed based on the LHC online modeling tool-chain. The calculation of available free aperture takes into account the best available optics and aperture model as well as the relevant beam measurements. This paper describes the design and integration of this application into the control environment and presents results of the usage in daily operation and from validation measurements. (authors)

  3. Combining smart metering with successful marketing; Smart Metering mit erfolgreichem Marketing verbinden

    Energy Technology Data Exchange (ETDEWEB)

    Luckhardt, Sina [EVB Energie AG, Velbert (Germany)

    2009-07-15

    Smart metering can be implemented in various ways. Apart from data transmission via powerline cables, also teletransmission via GPRS may be advantageous. A current project investigates both communication strategies which can also be used in parallel, especially by major utilities with the appropriate infrastructure. In the case of concrete implementation, it has been found that the communication with users must be clear in order to give them an idea of the advantages of the new technologies, and that an appropriate marketing strategy must be developed for successful rollout. (orig.)

  4. Too cheap to meter what?

    International Nuclear Information System (INIS)

    Wedekind, Lothar

    2004-01-01

    Full text: 50 years ago, at 17:30 hours, 26 June 1954, in the town of Obninsk, near Moscow, the first nuclear power plant sent electricity to residences and businesses. Atomic energy had crossed the divide from military uses to peaceful ones, demonstrating the potential to fuel civilian electric power plants. The milestone is being marked this year at an IAEA international nuclear power conference in Obninsk. Past experience will be reviewed, but the focus is on meeting future challenges. Though it has come a long way in 50 years, nuclear energy today finds itself in a struggle of the fittest to carve a niche over the next fifty - in the marketplace and in the public eye. Cliches and sound bites tell part of the nuclear story. Visionary talk by nuclear proponents in 1954 was about future energy sources that would be 'too cheap to meter', a phrase critics pounced upon. Today in 2004 the 'too cheap to meter' phrase occasionally haunts the atom, but pops up more often than not in promotional ads for anything from wind power to web sites. Talk of nuclear energy now is of a 'renaissance' and 'second wind.' New nuclear plants are most attractive where energy demand is growing and resources are scarce, and where energy security, air pollution and greenhouse gases are priorities, IAEA Director General Mohamed ElBaradei points out. In cities, towns, and villages, reality is different, or too much the same, depending how you see and live it. Cheap or not, nuclear energy today supplies one-sixth of the world's electricity in some 30 countries. Still, it does not produce enough power. Neither does any other energy source. More than 1.5 billion people have no electricity to meter whatsoever - not from renewables, solar, nuclear, biomass, wind, coal, oil, gas, firewood, or hydrogen, the publicized promise of tomorrow. So what will it take? Maybe bigger blackouts or hotter days than the world has seen. Certainly needed are more attention, action, and money. In dollar terms

  5. Evaluation of methods to calibrate radiation survey meters

    International Nuclear Information System (INIS)

    Robinson, R.C.; Arbeau, N.D.

    1987-04-01

    Calibration requirements for radiation survey meters used in industrial radiography have been reviewed. Information obtained from a literature search, discussions with CSLD inspectors and firms performing calibrations has been considered. Based on this review a set of minimum calibration requirements was generated which, when met, will determine that the survey meter is suited for measurements described in the current AEC Regulations that apply to industrial radiography equipment. These requirements are presented in this report and may be used as guidelines for evaluating calibration methods proposed or in use in industry. 39 refs

  6. Setting a price for solar net-metering in California

    OpenAIRE

    Knezevic, Laura M

    2014-01-01

    Net-metering programs are an effective policy tool for promoting investment in solar photovoltaics, yet little attention has been paid to the rate at which excess energy generation is credited until recently. Like most States, California customers who participate in net-metering receive a credit for excess generation at the current retail rate for electricity. This buy-back rate does not take into account the value of solar energy to the utility or the costs to the customer of purchasing an...

  7. Cultivable mycobacteria in sphagnum vegetation of moors in South Sweden and coastal Norway.

    Science.gov (United States)

    Kazda, J; Müller, K; Irgens, L M

    1979-04-01

    Intact sphagnum vegetation from moors in south Sweden and coastal areas of west Norway contained cultivable mycobacteria in 32% and 30% of the specimens, respectively. This frequency of specimens is lower than the 50% previously found in the partly altered moors of northwestern Germany, but the Scandinavian moors contained a larger variety of species. On both intact and altered moors M. chelonei and M. sphagni sp. nov. were found, the latter a homologous group of 151 strains. In south Sweden the highest frequency was found in S. balticum, S. recurvum. S. tenellum and S. compactum & molle. (40-65%). In coastal Norway the highest frequency was found in S. rubellum (48%) which offers favourable conditions for the accumulation of solar energy due to the red brown colour in the upper parts. Combined with a high humidity in coastal Norway in summer, this may contribute to the growth of mesophilic mycobacteria. A significant affinity of M. chelonei to S. tenellum was stated.

  8. Ameerika rahva tunnustus innustab Moore'i jätkama / Margit Tõnson

    Index Scriptorium Estoniae

    Tõnson, Margit, 1978-

    2005-01-01

    Ameerika kinokülastajad valisid 2004. aasta oma maa parimaks filmiks (People's Choice Award) Michael Moore'i dokumentaali "Fahrenheit 9/11". Lisa : nimekiri "Rahva lemmikud" teistest auhinnasaajatest

  9. AWI Moored ULS Data, Greenland Sea and Fram Strait, 1991-2002, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set consists of Upward Looking Sonar (ULS) data from 11 moorings in the Greenland Sea. Parameters in the processed data files include ice draft, water...

  10. AWI Moored ULS Data, Greenland Sea and Fram Strait, 1991-2002

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of Upward Looking Sonar (ULS) data from 11 moorings in the Greenland Sea. Parameters in the processed data files include ice draft, water...

  11. Comparison of Mooring Loads in Survivability Mode on the Wave Dragon Wave Energy Converter Obtained by a Numerical Model and Experimental Data

    DEFF Research Database (Denmark)

    Parmeggiani, Stefano; Muliawan, Made Jaya; Gao, Zhen

    2012-01-01

    The Wave Dragon Wave Energy Converter is ready to be up-scaled to commercial size. The design and feasibility analysis of a 1.5 MW pre-commercial unit to be deployed at the DanWEC test center in Hanstholm, Denmark, is currently ongoing. With regard to the mooring system, the design has...... in the frequency domain is performed by the software HydroD, which uses WAMIT as core software. The quadratic damping term, accounting for the viscous effect, is determined through an iterative procedure aimed at matching numerical predictions on the mooring tension, derived through time domain coupled analysis......, with experimental results derived from tank tests of a small scale model. Due to the complex geometry of the device, a sensitivity analysis is performed to discuss the influence of the mean position on the quality of the numerical predictions. Good correspondence is achieved between the experimental and numerical...

  12. ATD-2 Surface Scheduling and Metering Concept

    Science.gov (United States)

    Coppenbarger, Richard A.; Jung, Yoon Chul; Capps, Richard Alan; Engelland, Shawn A.

    2017-01-01

    This presentation describes the concept of ATD-2 tactical surface scheduling and metering. The concept is composed of several elements, including data exchange and integration; surface modeling; surface scheduling; and surface metering. The presentation explains each of the elements. Surface metering is implemented to balance demand and capacity• When surface metering is on, target times from surface scheduler areconverted to advisories for throttling demand• Through the scheduling process, flights with CTOTs will not get addedmetering delay (avoids potential for ‘double delay’)• Carriers can designate certain flights as exempt from metering holds• Demand throttle in Phase 1 at CLT is through advisories sent to rampcontrollers for pushback instructions to the flight deck– Push now– Hold for an advised period of time (in minutes)• Principles of surface metering can be more generally applied to otherairports in the NAS to throttle demand via spot-release times (TMATs Strong focus on optimal use of airport resources• Flexibility enables stakeholders to vary the amount of delay theywould like transferred to gate• Addresses practical aspects of executing surface metering in aturbulent real world environment• Algorithms designed for both short term demand/capacityimbalances (banks) or sustained metering situations• Leverage automation to enable surface metering capability withoutrequiring additional positions• Represents first step in Tactical/Strategic fusion• Provides longer look-ahead calculations to enable analysis ofstrategic surface metering potential usage

  13. Dynamic Analysis of Mooring Cables with Application to Floating Offshore Wind Turbines

    OpenAIRE

    Petrone, C.; Oliveto, N. D.; Sivaselvan, M. V.

    2015-01-01

    Floating offshore wind turbines are recently being considered widely for adoption in the wind power industry, attracting interest of several researchers and calling for the development of appropriate computational models and techniques. In the present work, a nonlinear finite-element formulation is proposed and applied to the static and dynamic analysis of mooring cables. Numerical examples are presented, and in particular, a mooring cable typically used for floating offshore wind turbines is...

  14. Measuring Turbulence from Moored Acoustic Doppler Velocimeters. A Manual to Quantifying Inflow at Tidal Energy Sites

    Energy Technology Data Exchange (ETDEWEB)

    Kilcher, Levi [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thomson, Jim [Univ. of Washington, Seattle, WA (United States); Talbert, Joe [Univ. of Washington, Seattle, WA (United States); DeKlerk, Alex [Univ. of Washington, Seattle, WA (United States)

    2016-03-01

    This work details a methodology for measuring hub height inflow turbulence using moored acoustic Doppler velocimiters (ADVs). This approach is motivated by the shortcomings of alternatives. For example, remote velocity measurements (i.e., from acoustic Doppler profilers) lack sufficient precision for device simulation, and rigid tower-mounted measurements are very expensive and technically challenging in the tidal environment. Moorings offer a low-cost, site-adaptable and robust deployment platform, and ADVs provide the necessary precision to accurately quantify turbulence.

  15. Study on global performances and mooring-induced damping of a semi-submersible

    Science.gov (United States)

    Xiong, Ling-zhi; Yang, Jian-min; Lv, Hai-ning; Zhao, Wen-hua; Kou, Yu-feng

    2016-10-01

    The harsh environmental conditions bring strong nonlinearities to the hydrodynamic performances of the offshore floating platforms, which challenge the reliable prediction of the platform coupled with the mooring system. The present study investigates a typical semi-submersible under both the operational and the survival conditions through numerical and experimental methods. The motion responses, the mooring line tensions, and the wave loads on the longitudinal mid-section are investigated by both the fully non-linearly coupled numerical simulation and the physical experiment. Particularly, in the physical model test, the wave loads distributed on the semi-submersible's mid-section were measured by dividing the model into two parts, namely the port and the starboard parts, which were rigidly connected by three six-component force transducers. It is concluded that both the numerical and physical model can have good prediction of the semi-submersible's global responses. In addition, an improved numerical approach is proposed for the estimation of the mooring-induced damping, and is validated by both the experimental and the published results. The characteristics of the mooring-induced damping are further summarized in various sea states, including the operational and the survival environments. In order to obtain the better prediction of the system response in deep water, the mooring-induced damping of the truncated mooring lines applied in the physical experiment are compensated by comparing with those in full length. Furthermore, the upstream taut and the downstream slack mooring lines are classified and investigated to obtain the different mooring line damping performances in the comparative study.

  16. Camille Flammarion's the planet Mars as translated by Patrick Moore

    CERN Document Server

    2015-01-01

    Camille Flammarion (1842-1925) began his career at 16 as a human computer under the great mathematician U. J. J. Le Verrier at the Paris Observatory.  He soon tired of the drudgery; he was drawn to more romantic vistas, and at 19 wrote a book on an idea that he was to make his own—the habitability of other worlds.  There followed a career as France’s greatest popularizer of astronomy, with over 60 titles to his credit.  An admirer granted him a chateau at Juvisy-sur-l’Orge, and he set up a first-rate observatory dedicated to the study of the planet Mars. Finally, in 1892, he published his masterpiece, La Planete Mars et ses conditions d’habitabilite, a comprehensive summary of three centuries’ worth of literature on Mars, much of it based on his own personal research into rare memoirs and archives.  As a history of that era, it has never been surpassed, and remains one of a handful of indispensable books on the red planet. Sir Patrick Moore (1923-2012) needs no introduction; his record of popula...

  17. Dynamically Scaled Model Experiment of a Mooring Cable

    Directory of Open Access Journals (Sweden)

    Lars Bergdahl

    2016-01-01

    Full Text Available The dynamic response of mooring cables for marine structures is scale-dependent, and perfect dynamic similitude between full-scale prototypes and small-scale physical model tests is difficult to achieve. The best possible scaling is here sought by means of a specific set of dimensionless parameters, and the model accuracy is also evaluated by two alternative sets of dimensionless parameters. A special feature of the presented experiment is that a chain was scaled to have correct propagation celerity for longitudinal elastic waves, thus providing perfect geometrical and dynamic scaling in vacuum, which is unique. The scaling error due to incorrect Reynolds number seemed to be of minor importance. The 33 m experimental chain could then be considered a scaled 76 mm stud chain with the length 1240 m, i.e., at the length scale of 1:37.6. Due to the correct elastic scale, the physical model was able to reproduce the effect of snatch loads giving rise to tensional shock waves propagating along the cable. The results from the experiment were used to validate the newly developed cable-dynamics code, MooDy, which utilises a discontinuous Galerkin FEM formulation. The validation of MooDy proved to be successful for the presented experiments. The experimental data is made available here for validation of other numerical codes by publishing digitised time series of two of the experiments.

  18. Net Metering and Interconnection Procedures-- Incorporating Best Practices

    Energy Technology Data Exchange (ETDEWEB)

    Jason Keyes, Kevin Fox, Joseph Wiedman, Staff at North Carolina Solar Center

    2009-04-01

    State utility commissions and utilities themselves are actively developing and revising their procedures for the interconnection and net metering of distributed generation. However, the procedures most often used by regulators and utilities as models have not been updated in the past three years, in which time most of the distributed solar facilities in the United States have been installed. In that period, the Interstate Renewable Energy Council (IREC) has been a participant in more than thirty state utility commission rulemakings regarding interconnection and net metering of distributed generation. With the knowledge gained from this experience, IREC has updated its model procedures to incorporate current best practices. This paper presents the most significant changes made to IREC’s model interconnection and net metering procedures.

  19. Myxomycetes on carnaubeira (Copernicia prunifera (Miller H. E. Moore, Arecaceae Myxomycetes em carnaubeira (Copernicia prunifera (Miller H. E. Moore, Arecaceae

    Directory of Open Access Journals (Sweden)

    Mitra Mobin

    2000-04-01

    Full Text Available Entre dezembro/1994 e setembro/1995 foram realizadas sete excursões (2 a 4 dias cada ao Parque Nacional de Sete Cidades (4º5'-4º15'S, 41º30'-41º40'W, 450m alt., em Piripiri, Piauí, visando coletar frutificações de Myxomycetes em indivíduos de Coperniciaprunifera (Miller H. E. Moore, estabelecidos em área de cerrado, na localidade Lagoa Seca. As amostras foram herborizadas e incorporadas ao herbário UFP (Universidade Federal de Pernambuco, Recife, PE, com duplicatas no herbário TEPB (Universidade Federal do Piauí, Teresina, PI. Registrou-se apreciável incidência (70% de Myxomycetes na carnaubeira, em estipe vivo e folhas mortas. Dezesseis espécies, pertencentes às Ceratiomyxaceae (Ceratiomyxa lsp., Didymiaceae (Diachea lsp., Didymium 2spp., Physaraceae (Craterium 1sp., Physarum 4spp., Trichiaceae (Arcyria 2spp. e Stemonitaceae (Comatricha 3spp., Macbrideola lsp., Stemonitis lsp. foram registradas. Ceratiomyxaceae, representada por Ceratiomyxafruticulosa (Mull. Macbr., constitui primeira referência para o Estado do Piauí.From December, 1994 to September, 1995, seven collecting trips (2-4 days each were carried out in the "Parque Nacional de Sete Cidades" (4º5'-4º15'S, 41º30"-41º40'W, 450m alt., Piripiri, Piauí State, Brazil, in order to collect Myxomycetes fruiting bodies on carnauba palm trees (Coperniciaprunifera (Miller H. E. Moore, established in a place called "Lagoa Seca" (savanna-like stunted vegetation. The samples were herborized and included in the UFP Herbarium (Universidade Federal de Pernambuco, Recife, PE and the TEPB Herbarium (Universidade Federal do Piauí, Teresina, PI. In relation to the substrate, the "carnaubeira" showed a high incidence of Myxomycetes (70% on living stipitis and dead leaves. Sixteen species belonging to Ceratiomyxaceae (Ceratiomyxa lsp., Didymiaceae (Diachea lsp., Didymium 2spp., Physaraceae (Craterium lsp., Physarum 4spp., Trichiaceae (Arcyria 2spp. and Stemonitaceae (Comatricha 3spp

  20. Design Optimization for a Truncated Catenary Mooring System for Scale Model Test

    Directory of Open Access Journals (Sweden)

    Climent Molins

    2015-11-01

    Full Text Available One of the main aspects when testing floating offshore platforms is the scaled mooring system, particularly with the increased depths where such platforms are intended. The paper proposes the use of truncated mooring systems to emulate the real mooring system by solving an optimization problem. This approach could be an interesting option when the existing testing facilities do not have enough available space. As part of the development of a new spar platform made of concrete for Floating Offshore Wind Turbines (FOWTs, called Windcrete, a station keeping system with catenary shaped lines was selected. The test facility available for the planned experiments had an important width constraint. Then, an algorithm to optimize the design of the scaled truncated mooring system using different weights of lines was developed. The optimization process adjusts the quasi-static behavior of the scaled mooring system as much as possible to the real mooring system within its expected maximum displacement range, where the catenary line provides the restoring forces by its suspended line length.