Progress in ZEBs—A review of definitions, policies and construction activity

International Nuclear Information System (INIS)

Panagiotidou, Maria; Fuller, Robert J.

2013-01-01

The aim of this paper is to review three interlinked aspects of Zero Energy (or Emissions) Buildings (ZEB): definitions, government policies and construction activity. It is critical to understand the current status of these three aspects in order to advance the ZEB concept. In broad terms, a ZEB can be described as a residential or commercial building with greatly reduced energy needs and/or carbon emissions, achieved through efficiency gains, such that the balance of energy needs can be supplied by renewable energy. The paper explores how leading countries have defined and are implementing the concept of ZEBs. Although the term ZEB can be used for both commercial and residential buildings, the paper is limited to the latter since this sector produces the greatest amount of emissions. Case studies are used to illustrate the current level of understanding in various countries. The paper concludes that although the term ZEB has been used for some time, there is still no globally-agreed definition or pathway to it. In addition, construction progress is still limited to demonstration projects located in or driven by countries which have already established ZEB policies or a tradition in low energy buildings. -- Highlights: •Not enough ZEBs globally and activity levels are too slow. •No evidence of consensus emerging over ZEB definition. •Countries that have ZEB policies are encountering resistance from building industry. •ZEB definitions and policies focus only on operational energy use

Occupational and leisure-time physical activity and workload among construction workers

DEFF Research Database (Denmark)

Gram, Bibi; Westgate, Kate; Karstad, Kristina

2016-01-01

BACKGROUND: There is a lack of quantification of occupational physical activity (OPA) and leisure time physical activity (LTPA) among construction workers. OBJECTIVES: To describe physical activity energy expenditure (PAEE), physical workload, and the effect of a PA-intervention among construction...... workers. METHODS: Sixty-seven Construction workers self-reported their physical activity (PA), had PA assessed directly (PAEE), and observed OPA using the tool "Posture, Activity, Tools and Handling." The PA-intervention (Intervention; n = 29, Controls; n = 24) included 3x20-min training/week for 12 weeks...

Chiral measurements with the Fixed-Point Dirac operator and construction of chiral currents

International Nuclear Information System (INIS)

Hasenfratz, P.; Hauswirth, S.; Holland, K.; Joerg, T.; Niedermayer, F.

2002-01-01

In this preliminary study, we examine the chiral properties of the parametrized Fixed-Point Dirac operator D FP , see how to improve its chirality via the Overlap construction, measure the renormalized quark condensate Σ-circumflex and the topological susceptibility χ t , and investigate local chirality of near zero modes of the Dirac operator. We also give a general construction of chiral currents and densities for chiral lattice actions

Anomalies and contradictions in an airport construction project: a historical analysis based on Cultural-Historical Activity Theory.

Science.gov (United States)

Lopes, Manoela Gomes Reis; Vilela, Rodolfo Andrade de Gouveia; Querol, Marco Antônio Pereira

2018-02-19

Large construction projects involve the functioning of a complex activity system (AS) in network format. Anomalies such as accidents, delays, reworks, etc., can be explained by contradictions that emerge historically in the system. The aim of this study was to analyze the history of an airport construction project to understand the current contradictions and anomalies in the AS and how they emerged. A case study was conducted for this purpose, combining Collective Work Analysis, interviews, observations, and analysis of documents that provided the basis for sessions in the Change Laboratory, where a participant timeline was elaborated with the principal events during the construction project. Based on the timeline, a historical analysis of the airport's AS revealed critical historical events and contradictions that explained the anomalies that occurred during the project. The analysis showed that the airport had been planned for construction with politically determined deadlines that were insufficient and inconsistent with the project's complexity. The choice of the contract modality, which assigned responsibility to a joint venture for all of the project's phases, was another critical historical event, because it allowed launching the construction before a definitive executive project had been drafted. There were also different cultures in companies working together for the first time in the context of a project with time pressures and outsourcing of activities without the necessary coordination. Identifying these contradictions and their historical origins proved essential for understanding the current situation and efforts to prevent similar situations in the future.

Circle activity of quality assurance in construction

International Nuclear Information System (INIS)

1982-05-01

This book explains purpose, introduction 10 things to keep in mind, management and role of QC activity, TQC and QC circle activity in construction, introduction of the case of QC circle activity in a company like QC circle activity as TQC activity and QC circle for the bright future, case of experience of QC circle activity such as decreasing concrete loss, improvement of sleeve sticking on the ps wooden floor, overcoming handicap in field where one person works and point of QC 7 tools and order of improvement and management.

Improvement of QA/QC activities in the construction of nuclear power plant

International Nuclear Information System (INIS)

Jinji Tomita; Shigetaka Tomaru

1987-01-01

Construction of commercial nuclear power plants in Japan started at around 1965. In this presentation are described quality assurance (QA) activities of a plant supplier who is a manufacturer of the key components as well. The QA activities until now are divided into several periods of the construction history in Japan. First term is 1960's when the QA activities are featured as the study and implementation through the construction of imported plants. Since then technologies and procedures of our own have been established and improved for the construction of high reliability plants. Our present QA activities are based on the active reflection of those lessons learned of past experiences. (author)

[A review of current studies on leisure activities performed by community-dwelling elders].

Science.gov (United States)

Li, Yueh-Ping; Chen, Ching-Huey

2010-02-01

This article reviewed and summarized the findings of previously published studies on the leisure activities of community elders over 55 years of age. A total of 17 related articles, published before 2008, were identified in the search of electronic databases, which included the Chinese Periodical Table of Contents Index Image System, CEPS, Medline and Ageline. Leisure activities measurements used in this study consisted of recoding activities either categorically or by frequency. The majority of research indicated that elderly engage in primarily static activities and that participation in leisure activities had positive effects on cognitive and psychological health. However, inconsistencies in results were found due to differences in measurement tools and sample populations used among studies, making it difficult to conduct a valid comparison of specific features of elderly leisure activities. Most current leisure activity studies utilize cross-sectional research methodologies with restricted topics, which result in limited applicability of research results. In conclusion, we suggest that future studies should develop instruments to assess leisure activities that correspond to local conditions identified through qualitative research. With such, researchers can study different age groups by applying relevant ageing theories to construct empirical data related to current elderly leisure activities.

Problems of development and ecological construction in terms of design and construction activities in the Volgograd region

OpenAIRE

Taranova Anna Valer'evna; Borisova Natal'ja Ivanovna

2016-01-01

The analysis of existing problems and the further development of ecological construction in the Volgograd region. Discusses the problem of socio-environmental plan in terms of project construction activities. The necessity of identifying the sources of negative impact on the construction of residential properties, define solutions for their further elimination, the authors show the necessity of using environmental innovation techniques in modern construction industry.

[Ecological demonstration activity and eco-civilization construction mode: review and prospects].

Science.gov (United States)

Mao, Hui-ping; He, Xuan; He, Jia; Niu, Dong-jie; Bao, Cun-kuan

2013-04-01

Ecological civilization is to normalize human development behaviors to harmonize the relationships between social and ecological development and eco-environment protection. In this paper, a comparative analysis was made on the ecological demonstration activities of ecological demonstration areas led by the Ministry of Environmental Protection, exemplar cities of national environmental protection, and ecological provinces, cities, and counties. It was considered that all the ecological demonstration activities had the problems of lacking pertinence of construction goals, disordered construction subjects, inefficient construction processes, and lacking continuous incentive mechanisms of assessment. In the meantime, through the analysis of the connotations of eco-civilization, the relationships between eco-civilization and eco-demonstration constructions were approached, and the eco-civilization construction mode was put forward in terms of construction goal, construction subject, and construction processes and assessment. The construction mode included the construction goal based on regional characteristics; the synergistic cooperation of construction subjects, the expanding ways of public participation, and the establishment of evaluation system for comprehensively measuring the 'actions and results'.

Cost Based Value Stream Mapping as a Sustainable Construction Tool for Underground Pipeline Construction Projects

Directory of Open Access Journals (Sweden)

Murat Gunduz

2017-11-01

Full Text Available This paper deals with application of Value Stream Mapping (VSM as a sustainable construction tool on a real construction project of installation of underground pipelines. VSM was adapted to reduce the high percentage of non-value-added activities and time wastes during each construction stage and the paper searched for an effective way to consider the cost for studied construction of underground pipeline. This paper is unique in its way that it adopts cost implementation of VSM to improve the productivity in underground pipeline projects. The data was observed and collected from site during construction, indicating the cycle time, value added and non-value added of each construction stage. The current state was built based on these details. This was an eye-opening exercise and a process management tool as a trigger for improvement. After the current state assessment, a future state is attempted by Value Stream Mapping tool balancing the resources using a Line of Balance (LOB technique. Moreover, a sustainable cost estimation model was developed during current state and future state to calculate the cost of underground pipeline construction. The result shows a cost reduction of 20.8% between current and future states. This reflects the importance of the cost based Value Stream Mapping in construction as a sustainable measurement tool. This new tool could be utilized in construction industry to add the sustainability and effective cost management.

Safety risk assessment for vertical concrete formwork activities in civil engineering construction.

Science.gov (United States)

López-Arquillos, Antonio; Rubio-Romero, Juan Carlos; Gibb, Alistair G F; Gambatese, John A

2014-01-01

The construction sector has one of the worst occupational health and safety records in Europe. Of all construction tasks, formwork activities are associated with a high frequency of accidents and injuries. This paper presents an investigation of the activities and related safety risks present in vertical formwork for in-situ concrete construction in the civil engineering sector. Using the methodology of staticized groups, twelve activities and ten safety risks were identified and validated by experts. Every safety risk identified in this manner was quantified for each activity using binary methodology according to the frequency and severity scales developed in prior research. A panel of experts was selected according to the relevant literature on staticized groups. The results obtained show that the activities with the highest risk in vertical formwork tasks are: Plumbing and leveling of forms, cutting of material, handling materials with cranes, and climbing or descending ladders. The most dangerous health and safety risks detected were falls from height, cutting and overexertion. The research findings provide construction practitioners with further evidence of the hazardous activities associated with concrete formwork construction and a starting point for targeting worker health and safety programmes.

A revisit on the current practice of dispute resolution and ADR in the Malaysian construction industry

Directory of Open Access Journals (Sweden)

Mohd Suhaimi Mohd Danuri

2012-06-01

Full Text Available The current dispute resolution procedures available in the Malaysian construction industry are mainly litigation and arbitration. In addition, the alternative dispute resolutions (ADR, namely mediation and adjudication, have also been introduced as the other methods for resolving disputes. The objective of this study is to examine the current practice of dispute resolution and ADR available in the Malaysian construction industry. The aim of this paper is two-fold: to report the current practice of dispute resolution and ADR, and identify the attributes of successful implementation of both mechanisms based on the perceptions of the Malaysian construction industry players. From the jurisprudence point of view, this study looks into the law as it is, in relation to the current practice of dispute resolution and ADR, by showing how those findings can be used to explain why improvement is needed to promote a successful and well received dispute resolution and ADR, and what lessons can be learnt, towards the formulation of a more viable methods for the Malaysian construction industry. NVivo software has been used to manage and organise the complete interview transcripts and facilitate the data analysis process for this study. Literature review reveals a continuous development of dispute resolution and ADR in the Malaysian construction industry, while, globally the industry has not only embraced ADR but also spearheaded the development of innovative forms of dispute avoidance mechanism. The findings of interviews show that locally, apart from litigation, the common types of ADR are arbitration, mediation and ad hoc mechanism. The findings also lead to the discovery of the following attributes: faster, less procedural, cost effective and enforceable; regulation and government's support; professionalism and ethic; training; and facility, that may promote a successful implementation of dispute resolution and ADR in Malaysia.

INFORMATION-ANALYTICAL MODEL FOR THE SELECTION OF MANAGEMENT METHODS ACCORDING TO THE DEGREE OF THEIR INFLUENCE ON EFFICIENCY OF PRODUCTION ACTIVITY OF CONSTRUCTION ORGANISATIONS

Directory of Open Access Journals (Sweden)

Sh. T. Ismailova

2017-01-01

Full Text Available Objectives. Relevant problems related to the adoption of unprogrammed solutions in the process of managing the production  activity of a construction enterprise in unstable, a priori  underdetermined economic environments are addressed.The aim of  the study is todevelop tools and methods for assessing the  effectiveness of the current state of construction production and on  this basis to identify the most effective management of a  construction organisation under unstable market conditions.Methods. The methodology of the conducted research is based on the application of the mathematical apparatus of fuzzy sets for the  processing of expert data and the formation on this basis of linguistic functions that determine the analytical relationship between various  indicators of the production activity of the construction organisation.Results. A method is developed for processing expert data using  fuzzy logic, making it possible to form an analytical relationship  between the performance indicators of the production activity of the  construction organisation and the management parameters that  determine its current state. An alternative means for selecting the  most effective management approach, accounting for its influence on the efficiency of the production activity of the construction organisation, is developed.Conclusion. An information-economic model of situational management of the development of a construction organisation is  developed. The proposed tools and methods allow the effective  management of the production activity of the construction  organisation to be organised, and on this basis to increase the  efficiency of production under different economic conditions in the presence of spontaneously arising perturbative factors. The methodical approach to the organisation of management of the  production activity efficiency of the construction organisation allows the effective subsystems of management

Efficiency improvement of the investment and innovation activities in the transport facility construction field with public-private partnership involvement

Science.gov (United States)

Shibayeva, Marina; Serebryakova, Yelena; Shalnev, Oleg

2017-10-01

Growing demand to increase the investment volume in modernization and development projects for transport infrastructure define the urgency of the current study. The amount of private sector investments in the field is insufficient to implement the projects for road construction due to their significant capital intensity and long payoff period. The implementation of social significant infrastructure projects on the principles of public-private partnership is one of the key strategic directions of growth for transport facilities. The authors come up with a concept and methodology for modeling the investment and innovation activity in the transport facility construction. Furthermore, there is developed a model to find the balance between public and private sector investments in implementing construction projects for transport infrastructure with involvement of PPP (further - public-private partnership). The suggested concepts aim to improve the efficiency rate of the investment and innovation activity in the field of transport facility construction on the basis of public and private sectors collaboration.

Undergraduate Student Construction and Interpretation of Graphs in Physics Lab Activities

Science.gov (United States)

Nixon, Ryan S.; Godfrey, T. J.; Mayhew, Nicholas T.; Wiegert, Craig C.

2016-01-01

Lab activities are an important element of an undergraduate physics course. In these lab activities, students construct and interpret graphs in order to connect the procedures of the lab with an understanding of the related physics concepts. This study investigated undergraduate students' construction and interpretation of graphs with best-fit…

Chaos as a psychological construct: historical roots, principal findings, and current growth directions.

Science.gov (United States)

Guastello, Stephen J

2009-07-01

The landmarks in the use of chaos and related constructs in psychology were entwined with the growing use of other nonlinear dynamical constructs, especially catastrophes and self-organization. The growth in substantive applications of chaos in psychology is partially related to the development of methodologies that work within the constraints of psychological data. The psychological literature includes rigorous theory with testable propositions, lighter-weight metaphorical uses of the construct, and colloquial uses of "chaos" with no particular theoretical intent. The current state of the chaos construct and supporting empirical research in psychological theory is summarized in neuroscience, psychophysics, psychomotor skill and other learning phenomena, clinical and abnormal psychology, and group dynamics and organizational behavior. Trends indicate that human systems do not remain chaotic indefinitely; they eventually self-organize, and the concept of the complex adaptive system has become prominent. Chaotic turbulence is generally higher in healthy systems compared to unhealthy systems, although opposite appears true in mood disorders. Group dynamics research shows trends consistent with the complex adaptive system, whereas organizational behavior lags behind in empirical studies relative to the quantity of its theory. Future directions for research involving the chaos construct and other nonlinear dynamics are outlined.

ROW (Right-of-Way) interfering construction activities management program

Energy Technology Data Exchange (ETDEWEB)

Rosito, Roberta; Oliveira, Marisa; Lima, Shirley [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

2009-07-01

A significant portion of pipeline failures occurs due to external damage. This includes third party right of way (ROW) encroachment, which shall be identified and avoided. However, injuries caused by known and planned activities do happen. Construction of crossing or sharing ROW pipelines, crossing roads and bridges, neighboring buildings and excavations of any kind might put existing pipelines in risk. This paper presents how the TRANSPETRO ROW Interfering Construction Activities Management Program is implemented by a regional ROW maintenance department responsible for more than 3,000 km of pipelines, mostly in Rio de Janeiro and Minas Gerais states. This program is based on a TRANSPETRO procedure that was written after the publication of the Official Order number 125 of ANP (Oil, Gas and Biofuel Brazilian National Agency). Tasks from design review and approval to field construction supervision are performed by the staff responsible for the routine patrols and maintenance management. The ability of foreseeing risky activities is improved by expertise gained from day-to-day work on site. (author)

Enhancement of knowledge construction activities utilizing 21st century learning design rubric

Science.gov (United States)

Pedoche, Margarette Anne U.; Taladua, Janica Mae M.; Panal, Geicky Pearl C.; Magsayo, Joy R.; Guarin, Rica Mae B.; Myrna, H. Lahoylahoy

2018-01-01

The main objective of the study was to enhance knowledge construction activities on its design particularly the objectives, support materials, student activities and assessment tools. Activities from the 2nd Quarter of Science Learners Material were the basis in the adaptation of activities. The adapted activities were evaluated by the In-service Science teachers and undergone modification by the researchers based on the teacher's comments and suggestions. It was then evaluated, revised, and validated, tried-out using the 21st CLD Rubric. Subjects of the study were 110 students from Grade 7-B, Grade 7-D, Grade 7-F in Geronima Cabrera National High School, Kolambugan, Lanao del Norte during the academic year 2016-2017, the study to determine their learning capabilities investigated by the use of Knowledge Construction Activities in the 21st Century Classroom, to investigate how the lessons were understood and appreciated by students, to stimulate interpretation, analysis, synthesizing, or evaluating ideas and develop critical thinking. Both quantitative and qualitative data were obtained from the students' scores in three activities. Results showed that there was a significant difference between the pretest and posttest scores of students. Mean scores between the pretest and posttest showed a mean difference of 3.35, thus the null hypothesis was rejected. It could be concluded with sufficient evidence to show that the students had basically low prior knowledge about the topic ecosystem. A significant difference was seen in the pretest and posttest, scores of the activities and Ecosystem model results after the implementation phase that a knowledge construction type of activity was better than the traditional one for it promoted meaningful learning and active engagement of students. Based on the results, it was clear that the use of knowledge construction activities had an effect on student's achievement in comparison to traditional teaching method. Thus, it was

Mathematical description of information interaction in investment and construction activities

Directory of Open Access Journals (Sweden)

Sborshchikov Sergey Borisovich

2014-05-01

Full Text Available For effective management of investment and construction activity (ICA there must be a subsystem responsible for information interaction. The article considers the role of information in ICA, as well as the requirements and objectives of the information systems. Data collection, communication and processing, according to the authors, reflect the system running efficiency. Thanks to information security subsystem there is a possibility of measuring the efficiency of resource use and the relations between inputs and outputs of individual elements throughout investment and construction activities. Requirements of modern economic realities, particularly, investment and construction activities dynamics, should be adjusted to the flow of information: creating new connections, terminating the others. Developing the information management system, its structure and composition require consideration and planning. Development planning and management is closely related to the improvement of information links and upgrading the entire system of information security, its structure and functioning.

Does bipolar pacemaker current activate blood platelets?

DEFF Research Database (Denmark)

Gjesdal, Grunde; Hansen, Annebirthe Bo; Brandes, Axel

2009-01-01

OBJECTIVE: The aim of this study was to investigate whether bipolar pacemaker current lead can activate blood platelets. The null hypothesis was that 1 minute of electrical stimulation of platelets would not influence their subsequent reactivity to adenosine diphosphate (ADP). BACKGROUND: Both...... platelets and muscle cells contain actin and myosin filaments, and both cells are activated following calcium influx. Muscle cells open their calcium channels and contract when exposed to an electric current. Current through a bipolar pacemaker lead will expose a small volume of blood, including platelets......, to the depolarizing current. Platelet activation may ensue, resulting in aggregation, release reaction, and contraction. In contrast, a unipolar pacemaker system will not depolarize blood, but transmit current directly into the myocardium, and the current afterward passes through other tissues before returning...

Possible applications of alkali-activated systems in construction

OpenAIRE

Boháčová, J.; Staněk, S.; Vavro, M. (Martin)

2013-01-01

This paper deals with the possibilities of using alkali-activated systems in construction. This article summarizes the advantages and disadvantages of geopolymer in comparison to Portland cement, summarizes research and practical applications of alkali-activated materials in our country and abroad, and provides an overview of directions where these alternative inorganic binders can be in the future very well applied.

Constructing Media Artifacts in a Social Constructivist Environment to Enhance Students' Environmental Awareness and Activism

Science.gov (United States)

Karahan, Engin; Roehrig, Gillian

2015-02-01

Current science education reforms and policy documents highlight the importance of environmental awareness and perceived need for activism. As "environmental problems are socially constructed in terms of their conceptualized effects on individuals, groups, other living things and systems research based on constructivist principles provides not only a coherent framework in which to theorize about learning, but also a context for understanding socially constructed issues" (Palmer and Suggate in Res Pap Educ 19(2), 2004, p. 208). This research study investigated the impacts of the learning processes structured based on the theories of constructionism and social constructivism on students' environmental awareness and perceived need for activism. Students constructed multimedia artifacts expressing their knowledge, attitudes, awareness, and activism about environmental issues through a constructionist design process. In addition, a social networking site was designed and used to promote social interaction among students. Twenty-two high school environmental science students participated in this study. A convergent mixed methods design was implemented to allow for the triangulation of methods by directly comparing and contrasting quantitative results with qualitative findings for corroboration and validation purposes. Using a mixed method approach, quantitative findings are supported with qualitative data (student video projects, writing prompts, blog entries, video projects of the students, observational field notes, and reflective journals) including spontaneous responses in both synchronous and asynchronous conversations on the social network to provide a better understanding of the change in students' environmental awareness and perceived need for activism. The findings of the study indicated that students' environmental awareness and perceived need for activism were improved at different scales (personal, community, global) throughout the constructionist and social

Development and construction of a thermoelectric active facade module

Directory of Open Access Journals (Sweden)

Marıa Ibanez-Puy

2015-06-01

Full Text Available In order to fulfil the current challenges for the European building sector, building design has diverged into two alternative directions: active technologies and passive design strategies. In the last few years, advanced and responsive building envelope components have represented a promising answer to these challenges. This paper presents the design and construction process of a project that aims to design, build and control the energy performance of an industrial-scale modular active ventilated facade prototype with a new Themoelectric Peltier System (TPS. The TPS is a thermoelectric HVAC heat pump system designed to be located in the building envelope and providing a high comfort level. Trying to optimize the energy performance of the traditional ventilated opaque facade, and make more efficient the energy performance of the TPS, the concept of adaptability has been applied to ventilated opaque facades. The essential research theme is to control the natural phenomena that take place inside the ventilated air cavity of the facade: taking advantage when heat dissipation is needed, and avoiding it when heat losses are not welcome. In order to quantify the previous statements, some facade prototypes are being built in Pamplona (Spain and their energy performance is going to be analyzed during a year.  

Learning from instructional explanations: effects of prompts based on the active-constructive-interactive framework.

Science.gov (United States)

Roelle, Julian; Müller, Claudia; Roelle, Detlev; Berthold, Kirsten

2015-01-01

Although instructional explanations are commonly provided when learners are introduced to new content, they often fail because they are not integrated into effective learning activities. The recently introduced active-constructive-interactive framework posits an effectiveness hierarchy in which interactive learning activities are at the top; these are then followed by constructive and active learning activities, respectively. Against this background, we combined instructional explanations with different types of prompts that were designed to elicit these learning activities and tested the central predictions of the active-constructive-interactive framework. In Experiment 1, N = 83 students were randomly assigned to one of four combinations of instructional explanations and prompts. To test the active learning hypothesis, the learners received either (1) complete explanations and engaging prompts designed to elicit active activities or (2) explanations that were reduced by inferences and inference prompts designed to engage learners in constructing the withheld information. Furthermore, in order to explore how interactive learning activities can be elicited, we gave the learners who had difficulties in constructing the prompted inferences adapted remedial explanations with either (3) unspecific engaging prompts or (4) revision prompts. In support of the active learning hypothesis, we found that the learners who received reduced explanations and inference prompts outperformed the learners who received complete explanations and engaging prompts. Moreover, revision prompts were more effective in eliciting interactive learning activities than engaging prompts. In Experiment 2, N = 40 students were randomly assigned to either (1) a reduced explanations and inference prompts or (2) a reduced explanations and inference prompts plus adapted remedial explanations and revision prompts condition. In support of the constructive learning hypothesis, the learners who received

Construction of mutant glucose oxidases with increased dye-mediated dehydrogenase activity.

Science.gov (United States)

Horaguchi, Yohei; Saito, Shoko; Kojima, Katsuhiro; Tsugawa, Wakako; Ferri, Stefano; Sode, Koji

2012-11-02

Mutagenesis studies on glucose oxidases (GOxs) were conducted to construct GOxs with reduced oxidase activity and increased dehydrogenase activity. We focused on two representative GOxs, of which crystal structures have already been reported—Penicillium amagasakiense GOx (PDB ID; 1gpe) and Aspergillus niger GOx (PDB ID; 1cf3). We constructed oxygen-interacting structural models for GOxs, and predicted the residues responsible for oxidative half reaction with oxygen on the basis of the crystal structure of cholesterol oxidase as well as on the fact that both enzymes are members of the glucose/methanol/choline (GMC) oxidoreductase family. Rational amino acid substitution resulted in the construction of an engineered GOx with drastically decreased oxidase activity and increased dehydrogenase activity, which was higher than that of the wild-type enzyme. As a result, the dehydrogenase/oxidase ratio of the engineered enzyme was more than 11-fold greater than that of the wild-type enzyme. These results indicate that alteration of the dehydrogenase/oxidase activity ratio of GOxs is possible by introducing a mutation into the putative functional residues responsible for oxidative half reaction with oxygen of these enzymes, resulting in a further increased dehydrogenase activity. This is the first study reporting the alteration of GOx electron acceptor preference from oxygen to an artificial electron acceptor.

Construction of Mutant Glucose Oxidases with Increased Dye-Mediated Dehydrogenase Activity

Science.gov (United States)

Horaguchi, Yohei; Saito, Shoko; Kojima, Katsuhiro; Tsugawa, Wakako; Ferri, Stefano; Sode, Koji

2012-01-01

Mutagenesis studies on glucose oxidases (GOxs) were conducted to construct GOxs with reduced oxidase activity and increased dehydrogenase activity. We focused on two representative GOxs, of which crystal structures have already been reported—Penicillium amagasakiense GOx (PDB ID; 1gpe) and Aspergillus niger GOx (PDB ID; 1cf3). We constructed oxygen-interacting structural models for GOxs, and predicted the residues responsible for oxidative half reaction with oxygen on the basis of the crystal structure of cholesterol oxidase as well as on the fact that both enzymes are members of the glucose/methanol/choline (GMC) oxidoreductase family. Rational amino acid substitution resulted in the construction of an engineered GOx with drastically decreased oxidase activity and increased dehydrogenase activity, which was higher than that of the wild-type enzyme. As a result, the dehydrogenase/oxidase ratio of the engineered enzyme was more than 11-fold greater than that of the wild-type enzyme. These results indicate that alteration of the dehydrogenase/oxidase activity ratio of GOxs is possible by introducing a mutation into the putative functional residues responsible for oxidative half reaction with oxygen of these enzymes, resulting in a further increased dehydrogenase activity. This is the first study reporting the alteration of GOx electron acceptor preference from oxygen to an artificial electron acceptor. PMID:23203056

Shuttle Rocket Motor Program: NASA should delay awarding some construction contracts. Report to the Chair, Subcommittee on Government Activities and Transportation, Committee on Government Operations, House of Representatives

Science.gov (United States)

1992-01-01

Even though the executive branch has proposed terminating the Advanced Solid Rocket Motor (ASRM) program, NASA is proceeding with all construction activity planned for FY 1992 to avoid schedule slippage if the program is reinstated by Congress. However, NASA could delay some construction activities for at least a few months without affecting the current launch data schedule. For example, NASA could delay Yellow Creek's motor storage and dock projects, Stennis' dock project, and Kennedy's rotation processing and surge facility and dock projects. Starting all construction activities as originally planned could result in unnecessarily incurring additional costs and termination liability if the funding for FY 1993 is not provided. If Congress decides to continue the program, construction could still be completed in time to avoid schedule slippage.

Discursive constructions of falls prevention : Discourses of active aging versus old age as disease

DEFF Research Database (Denmark)

Evron, Lotte; Ulrich, Anita; Tanggaard, Lene

2012-01-01

information and investment in falls prevention programs, many still drop out or decline to participate in such programs. The study explores how discourses cross swords in the domain of falls prevention. We identify two main discourses in the field: Discourses of active aging opposed to discourses of old age...... as disease. In discourses of active aging falls are constructed as preventable and not necessarily related to old age; in discourses of old age as disease falls are constructed as a disease of old age. Specific agent positions are created within discourses. Discourses of active aging construct self......-responsible citizens who are physically active and motivated to participate in falls prevention programmes; discourses of old age as disease on the other hand construct “fall patients” who accept being passive in the health care system. Older citizens who are not in need of treatment or less physically active...

Construction of Mutant Glucose Oxidases with Increased Dye-Mediated Dehydrogenase Activity

Directory of Open Access Journals (Sweden)

Koji Sode

2012-11-01

Full Text Available Mutagenesis studies on glucose oxidases (GOxs were conducted to construct GOxs with reduced oxidase activity and increased dehydrogenase activity. We focused on two representative GOxs, of which crystal structures have already been reported—Penicillium amagasakiense GOx (PDB ID; 1gpe and Aspergillus niger GOx (PDB ID; 1cf3. We constructed oxygen-interacting structural models for GOxs, and predicted the residues responsible for oxidative half reaction with oxygen on the basis of the crystal structure of cholesterol oxidase as well as on the fact that both enzymes are members of the glucose/methanol/choline (GMC oxidoreductase family. Rational amino acid substitution resulted in the construction of an engineered GOx with drastically decreased oxidase activity and increased dehydrogenase activity, which was higher than that of the wild-type enzyme. As a result, the dehydrogenase/oxidase ratio of the engineered enzyme was more than 11-fold greater than that of the wild-type enzyme. These results indicate that alteration of the dehydrogenase/oxidase activity ratio of GOxs is possible by introducing a mutation into the putative functional residues responsible for oxidative half reaction with oxygen of these enzymes, resulting in a further increased dehydrogenase activity. This is the first study reporting the alteration of GOx electron acceptor preference from oxygen to an artificial electron acceptor.

Construction monitoring activities in the ESF starter tunnel

International Nuclear Information System (INIS)

Pott, J.; Carlisle, S.

1994-01-01

In situ design verification activities am being conducted in the North Ramp Starter Tunnel of the Yucca Mountain Project Exploratory Studies Facility. These activities include: monitoring the peak particle velocities and evaluating the damage to the rock mass associated with construction blasting, assessing the rock mass quality surrounding the tunnel, monitoring the performance of the installed ground support, and monitoring the stability of the tunnel. In this paper, examples of the data that have been collected and preliminary conclusions from the data are presented

Current practices of construction waste reduction through 3R practice among contractors in malaysia: Case study in penang

Science.gov (United States)

Ng, L. S.; Tan, L. W.; Seow, T. W.

2017-11-01

The effectiveness of the implementation of construction waste reduction through 3R reflects the sustainability in construction waste management. Weak implementation of construction waste reduction through 3R among contractors will lead to unsustainable construction waste management. Increase in construction waste on landfills is critical especially on islands where land is very limited for solid waste disposal. This aim of this paper is to investigate current practice of construction waste reduction through 3R practice among contractors in Penang, Malaysia. The findings reported herein is based on feedbacks from 143 construction contractors of grade CIDB G7, G6 and G5 in Penang and experts from Penang Local Authority, CIDB in Penang and its Headquarters, National Solid Waste Management Department, and Headquarters of Solid Waste and Public Cleansing Management Corporation. Interviews and questionnaire surveys have been found that 3R practice is not mandatory in construction waste management in Penang. Only 39.8% construction contractors practiced 3R in managing their waste. Therefore, 3R practices should be emphasized in construction industry. Reducing wastes through 3R practices in construction industry is a way forward towards sustainable construction waste management especially in expanding the lifetime of landfill.

29 CFR 4.116 - Contracts for construction activity.

Science.gov (United States)

2010-07-01

... McNamara-O'Hara Service Contract Act Specific Exclusions § 4.116 Contracts for construction activity. (a... McNamara-O'Hara Service Contract Act indicates that the purpose of the provision is to avoid overlapping coverage of the two acts by excluding from the application of the McNamara-O'Hara Act those contracts to...

Potential and Benefits of Building Information Modeling (BIM During Pre-Construction, Construction and Post Construction Stage

Directory of Open Access Journals (Sweden)

Aw Nien Wei

2017-11-01

Full Text Available The construction industry is the main economic support for all countries around the world in which continually adapting to meet competitive challenges around the global market. Nevertheless, the construction project is becoming much more complex and difficult to manage. This is because the construction project involves a large number of stakeholder, for example, the consultant companies, architects, engineers, building surveyors and quantity surveyors. The technology currently used in the construction industry is the AutoCAD (Automatic computeraided design. AutoCAD is a commercial software application for 2D and 3D computer-aided design (CAD and drafting develop by Autodesk. Generally, all the drawing design from Autocad will be exchanged among the stakeholder in the form of paper. Information exchanged among them mostly involves a lot of documents and drawings. This practice creates errors because of documents and drawings are mostly in a paper-based format that is not properly managed which results in miscommunication among them. Having wrong information in the construction process could hinder the productivity of projects because in a construction project information is one of the important construction materials. Building Information Modeling (BIM is one of the newly software in the architecture, engineering, and construction (AEC industries to ensure all parties receive the right information. BIM technology is also an intelligent model of a building constructed digitally in the way of 3D. The software will generate model containing the information needed to support the construction, fabrication, and procurement activities that needed to realize the building. This paper will discuss on potential and benefits of BIM during pre-construction stage, construction stage and during post construction stage

Mesh optimization for microbial fuel cell cathodes constructed around stainless steel mesh current collectors

KAUST Repository

Zhang, Fang

2011-02-01

Mesh current collectors made of stainless steel (SS) can be integrated into microbial fuel cell (MFC) cathodes constructed of a reactive carbon black and Pt catalyst mixture and a poly(dimethylsiloxane) (PDMS) diffusion layer. It is shown here that the mesh properties of these cathodes can significantly affect performance. Cathodes made from the coarsest mesh (30-mesh) achieved the highest maximum power of 1616 ± 25 mW m-2 (normalized to cathode projected surface area; 47.1 ± 0.7 W m-3 based on liquid volume), while the finest mesh (120-mesh) had the lowest power density (599 ± 57 mW m-2). Electrochemical impedance spectroscopy showed that charge transfer and diffusion resistances decreased with increasing mesh opening size. In MFC tests, the cathode performance was primarily limited by reaction kinetics, and not mass transfer. Oxygen permeability increased with mesh opening size, accounting for the decreased diffusion resistance. At higher current densities, diffusion became a limiting factor, especially for fine mesh with low oxygen transfer coefficients. These results demonstrate the critical nature of the mesh size used for constructing MFC cathodes. © 2010 Elsevier B.V. All rights reserved.

Risk analysis within environmental impact assessment of proposed construction activity

Energy Technology Data Exchange (ETDEWEB)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-15

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

Risk analysis within environmental impact assessment of proposed construction activity

International Nuclear Information System (INIS)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-01

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

Is the Current Way of Constructing Corporate Authority Records Still Useful?

Directory of Open Access Journals (Sweden)

Qiang Jin

2005-06-01

Full Text Available Catalogers have been establishing corporate body name headings (and other entities in their original language in the official form, as they appear most frequently on the title pages of publications for print publications, for many years. A random sample of corporate headings from the Library of Congress Name Authority File created during 1998–2002 was searched on the Web via Google to find corporate Web pages. The purpose of this research is to begin to answer the question: Does the current way of constructing corporate authority records still help users find resources by and about corporate bodies in the online public access catalog in this Web-oriented environment?

Constructing Aligned Assessments Using Automated Test Construction

Science.gov (United States)

Porter, Andrew; Polikoff, Morgan S.; Barghaus, Katherine M.; Yang, Rui

2013-01-01

We describe an innovative automated test construction algorithm for building aligned achievement tests. By incorporating the algorithm into the test construction process, along with other test construction procedures for building reliable and unbiased assessments, the result is much more valid tests than result from current test construction…

Nuclear power plant construction activity, 1986

International Nuclear Information System (INIS)

1987-01-01

Cost estimates, chronological data on construction progress, and the physical characteristics of nuclear units in commercial operation and units in the construction pipeline as of December 31, 1986, are presented. This report, which is updated annually, was prepared to provide an overview of the nuclear power plant construction industry. The report contains information on the status of nuclear generating units, average construction costs and lead-times, and construction milestones for individual reactors

Current man-made mineral fibers (MMMF) exposures among ontario construction workers.

Science.gov (United States)

Verma, Dave K; Sahai, Dru; Kurtz, Lawrence A; Finkelstein, Murray M

2004-05-01

Current occupational exposures to man-made mineral fibers (MMMF), including refractory ceramic fibers (RCF), were measured as part of an exposure assessment program for an epidemiological study pertaining to cancer and mortality patterns of Ontario construction workers. The assessments were carried out at commercial and residential sites. A total of 130 MMMF samples (104 personal and 26 area) was collected and included 21 RCF (16 personal and 5 area). The samples were analyzed by the World Health Organization method in which both respirable and nonrespirable airborne fibers are counted. The results show that Ontario construction workers' full-shift exposure to MMMF (excluding RCF) is generally lower than the American Conference of Governmental Industrial Hygienists' (ACGIH) recommended threshold limit value-time-weighted average (TLV-TWA) of 1 fibers/cc and thus should not present any significant hazard. However, approximately 40% of the occupational exposures to RCF are higher than ACGIH's TLV-TWA of 0.2 fibers/cc and present a significant potential hazard. Workers generally wore adequate approved respiratory protection, especially while performing particularly dusty tasks such as blowing, spraying, and cutting, so the actual exposure received by workers was lower than the reported values. Adequate control measures such as ventilation and respiratory protection should always be used when work involves RCF.

Activation of accelerator construction materials by heavy ions

Energy Technology Data Exchange (ETDEWEB)

Katrík, P., E-mail: p.katrik@gsi.de [GSI Darmstadt, Planckstrasse 1, D-64291 (Germany); Mustafin, E. [GSI Darmstadt, Planckstrasse 1, D-64291 (Germany); Hoffmann, D.H.H. [TU Darmstadt, Schlossgartenstraße 9, D-64289 (Germany); Pavlovič, M. [FEI STU Bratislava, Ilkovičova 3, SK-81219 (Slovakia); Strašík, I. [GSI Darmstadt, Planckstrasse 1, D-64291 (Germany)

2015-12-15

Activation data for an aluminum target irradiated by 200 MeV/u {sup 238}U ion beam are presented in the paper. The target was irradiated in the stacked-foil geometry and analyzed using gamma-ray spectroscopy. The purpose of the experiment was to study the role of primary particles, projectile fragments, and target fragments in the activation process using the depth profiling of residual activity. The study brought information on which particles contribute dominantly to the target activation. The experimental data were compared with the Monte Carlo simulations by the FLUKA 2011.2c.0 code. This study is a part of a research program devoted to activation of accelerator construction materials by high-energy (⩾200 MeV/u) heavy ions at GSI Darmstadt. The experimental data are needed to validate the computer codes used for simulation of interaction of swift heavy ions with matter.

Activities of the Center for Space Construction

Science.gov (United States)

1993-01-01

The Center for Space Construction (CSC) at the University of Colorado at Boulder is one of eight University Space Engineering Research Centers established by NASA in 1988. The mission of the center is to conduct research into space technology and to directly contribute to space engineering education. The center reports to the Department of Aerospace Engineering Sciences and resides in the College of Engineering and Applied Science. The college has a long and successful track record of cultivating multi-disciplinary research and education programs. The Center for Space Construction is prominent evidence of this record. At the inception of CSC, the center was primarily founded on the need for research on in-space construction of large space systems like space stations and interplanetary space vehicles. The scope of CSC's research has now evolved to include the design and construction of all spacecraft, large and small. Within this broadened scope, our research projects seek to impact the underlying technological basis for such spacecraft as remote sensing satellites, communication satellites, and other special purpose spacecraft, as well as the technological basis for large space platforms. The center's research focuses on three areas: spacecraft structures, spacecraft operations and control, and regolith and surface systems. In the area of spacecraft structures, our current emphasis is on concepts and modeling of deployable structures, analysis of inflatable structures, structural damage detection algorithms, and composite materials for lightweight structures. In the area of spacecraft operations and control, we are continuing our previous efforts in process control of in-orbit structural assembly. In addition, we have begun two new efforts in formal approach to spacecraft flight software systems design and adaptive attitude control systems. In the area of regolith and surface systems, we are continuing the work of characterizing the physical properties of lunar

Construction, emplacement, and retrievability (preclosure)

International Nuclear Information System (INIS)

McClain, W.

1985-01-01

Each of the three preclosure subgroups of the Construction, Emplacement, and Retrievability Working Group adopted a six-step approach to identify and assess current needs in geotechnical modeling and characterization. This approach may be summarized as follows: identify phenomena related to emplacement of high-level nuclear wastes, identify types of models which are required to calculate the phenomena, establish the input data needs for the models, assess the current availability of the models, assess the current status of documentation, verification, and validation of the models, and determine the adequacy of instrumentation and measurement techniques to (a) validate the models, where necessary, and (b) obtain input data for design. Systematic application of these six steps leads to the establishment of the research requirements for geotechnical modeling and characterization. A summary of modeling techniques which apply to the three subsequent sections on construction, emplacement, and retrievability is presented. Research needs, which apply to all preclosure activities, are summarized

Constructing bioactive peptides with pH-dependent activities.

Science.gov (United States)

Tu, Zhigang; Volk, Melanie; Shah, Khushali; Clerkin, Kevin; Liang, Jun F

2009-08-01

Many bioactive peptides are featured by their arginine and lysine rich contents. In this study, lysine and arginine residues in lytic peptides were selectively replaced by histidines. Although resulting histidine-containing lytic peptides had decreased activity, they did show pH-dependent cytotoxicity. The activity of the constructed histidine-containing lytic peptides increased 2-8 times as the solution pH changed from 7.4 to 5.5. More importantly, these histidine-containing peptides maintain the same cell killing mechanism as their parent peptides by causing cell lysis. Both the activity and pH-sensitivity of histidine-containing peptides are tunable by adjusting histidine substitution numbers and positions. This study has presented a general strategy to create bioactive peptides with desired pH-sensitivity to meet the needs of various applications such as cancer treatments.

Identity construction and British Muslims' political activity: beyond rational actor theory.

Science.gov (United States)

Hopkins, Nick; Kahani-Hopkins, Vered

2004-09-01

Political activity is often addressed in terms of rational actor theory (RAT). We review RAT's psychological assumptions and highlight the neglect of collective identity. In turn, we view the perception of 'interest' as contingent upon constructions of identity and explore how different characterizations of collective identity are organized strategically so as to shape people's understandings of their interests and how they should act to realize them. Using examples taken from a study of British Muslims' political activity we emphasize the contested and strategic dimension to identity construction and analyse how activists addressing the same constituency construe Muslim identity in different ways so as to promote different conceptions of collective interest. Specifically, we explore the contested invocations of Prophetic example in the definition of Muslim identity. The broader thrust behind this work is a critique of the sharp dichotomization of Muslim and non-Muslim political activity. We maintain that essentially similar processes of identity construction underlie all attempts to organize collective sentiment and political action (including that comprising so-called 'conventional' electoralist politics in the West), and that conceiving of identity as a site of political struggle underscores the inadequacy of Orientalist characterizations of Muslim identity in terms of a singular, transhistorical essence.

The Reciprocal Organization of Constructive Activity in Drug Addiction

Science.gov (United States)

Akhmetzyanova, Anna I.; Nikishina, Vera B.; Klyueva, Nadezhda V.; Petrash, Ekaterina A.

2016-01-01

The urgency of the problem stated in the article is caused by the fact that modern scientific studies show that sustainable neuro-associative connections with the object of addiction arise at chemical addiction. The aim of this study is to examine the features of the reciprocal organization of constructive activities in drug addiction. Study of…

Dynamic Analysis of an Office Building due to Vibration from Road Construction Activities

Science.gov (United States)

Chik, T. N. T.; Kamil, M. R. H.; Yusoff, N. A.; Ibrahim, M. H. W.

2018-04-01

Construction activities are widely known as one of the predominant sources of man-made vibrations that able to create nuisance towards any adjacent building, and this includes the road construction operations. Few studies conclude the construction-induced vibration may be harmful directly and indirectly towards the neighbouring building. This lead to the awareness of study the building vibration response of concrete masonry load bearing system and its vibrational performance towards the road construction activities. This study will simulate multi-storey office building of Sekolah Menengah Kebangsaan (SMK) Bandar Enstek at Negeri Sembilan by using finite element vibration analyses. The excitation of transient loads from ground borne vibrations which triggered by the road construction activities are modelled into the building. The vibration response was recorded during in-situ ambient vibration test by using Laser Doppler Vibrometer (LDV), which specifically performed on four different locations. The finite element simulation process was developed in the commercial FEA software ABAQUS. Then, the experimental data was processed and evaluated in MATLAB ModalV to assess the vibration criteria of the floor in building. As a result, the vibration level of floor in building is fall under VC-E curve which was under the maximum permissible level for office building (VC-ISO). The vibration level on floor is acceptable within the limit that have been referred.

[Mandible function in taking construction bite for activator].

Science.gov (United States)

Irie, M

1989-06-01

Functional effects of construction bite for activator (Andresen type) especially on lateral pterygoid muscle, as well as the positional changes of the mandible, hyoid bone and surface EMGs from bilateral anterior temporal (TA) and masseter (MM) muscle, were studied on the electric force scale, MKG, EMG and cephalometric radiographs in 14 subjects with anterior cross bite in mixed dentition. The cephalometric radiographs were taken at the start of each patient's treatment. One was taken with the mandible in the intercuspal position and one was also taken with the activator in the mouth at the overjet improvement. The activator patients were divided into two groups because of differences in the direction of movement of the hyoid bone in the FH plane. In group O (7 patients), the movement of the hyoid bone was at an oblique angle to the FH plane, while in group D (7 patients) the movement ot the hyoid bone with nearly direct below angle to FH plane. The patients were further divided into three types because of differences in the distance between the hyoid bone and mental spine, and combined with the groups OA (3 patients), OB (2 patients), OC (2 patients), DA (5 patients), DB (2 patients) and DC (Naught). The results obtained were as follows: The forces for the construction bite for groups O and D were 2.71 Kg and 2.72 kg, respectively. Type OC required significantly heavier force. (p less than 0.05) In the condylar test, O group was significantly smaller at the start of treatment, but not after overjet improvement. Type OA and OB were also significantly smaller at the start of treatment. (p less than 0.05) Velocity of opening for group D was significantly (p less than 0.05) faster at the start of treatment, but not after that. There was no significant difference in EMGs between the groups, with activator in the mouse D group much increased as it EMGs. The EMGs M/T ratio for both groups was approximately 100% at the start of treatment for overjet improvement. In cases

Construction of high current density SC magnets and their thermal stability

International Nuclear Information System (INIS)

Ishibashi, K.; Katase, A.; Kobayashi, M.; Wake, M.; Suzuki, K.

1979-07-01

Pancake type solenoid magnets are constructed which have a similar cooling characteristics to a pulsed dipole magnet for a synchrotron. A metal inpregnated braided cable is used to test a long sample of the cable. The detailed performances of the magnets and cable are examined with respect to achieved fields, training effect and ac losses. The stability theories which have been proposed so far are not adequate to these high current density magnets, so that a new method is developed to estimate the magnet stability. The minimum energy of thermal disturbances (MQE) which causes a quenching is measured by experiment and is compared with the calculation. The calculated values of MQE are in good agreement with the experimental results. The performance of the pancake magnet is discussed on the basis of MQE. (author)

A variational approach to niche construction.

Science.gov (United States)

Constant, Axel; Ramstead, Maxwell J D; Veissière, Samuel P L; Campbell, John O; Friston, Karl J

2018-04-01

In evolutionary biology, niche construction is sometimes described as a genuine evolutionary process whereby organisms, through their activities and regulatory mechanisms, modify their environment such as to steer their own evolutionary trajectory, and that of other species. There is ongoing debate, however, on the extent to which niche construction ought to be considered a bona fide evolutionary force, on a par with natural selection. Recent formulations of the variational free-energy principle as applied to the life sciences describe the properties of living systems, and their selection in evolution, in terms of variational inference. We argue that niche construction can be described using a variational approach. We propose new arguments to support the niche construction perspective, and to extend the variational approach to niche construction to current perspectives in various scientific fields. © 2018 The Authors.

Electric-current Neutralization, Magnetic Shear, and Eruptive Activity in Solar Active Regions

Energy Technology Data Exchange (ETDEWEB)

Liu, Yang; Sun, Xudong [W. W. Hansen Experimental Physics Laboratory, Stanford University, Stanford, CA 94305-4085 (United States); Török, Tibor; Titov, Viacheslav S. [Predictive Science Inc., 9990 Mesa Rim Road, Suite 170, San Diego, CA 92121 (United States); Leake, James E. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States)

2017-09-01

The physical conditions that determine whether or not solar active regions (ARs) produce strong flares and coronal mass ejections (CMEs) are not yet well understood. Here, we investigate the association between electric-current neutralization, magnetic shear along polarity inversion lines (PILs), and eruptive activity in four ARs: two emerging and two well-developed ones. We find that the CME-producing ARs are characterized by a strongly non-neutralized total current, while the total current in the ARs that did not produce CMEs is almost perfectly neutralized. The difference in the PIL shear between these two groups is much less pronounced, which suggests that the degree of current neutralization may serve as a better proxy for assessing the ability of ARs to produce CMEs.

Automated Construction of Molecular Active Spaces from Atomic Valence Orbitals.

Science.gov (United States)

Sayfutyarova, Elvira R; Sun, Qiming; Chan, Garnet Kin-Lic; Knizia, Gerald

2017-09-12

We introduce the atomic valence active space (AVAS), a simple and well-defined automated technique for constructing active orbital spaces for use in multiconfiguration and multireference (MR) electronic structure calculations. Concretely, the technique constructs active molecular orbitals capable of describing all relevant electronic configurations emerging from a targeted set of atomic valence orbitals (e.g., the metal d orbitals in a coordination complex). This is achieved via a linear transformation of the occupied and unoccupied orbital spaces from an easily obtainable single-reference wave function (such as from a Hartree-Fock or Kohn-Sham calculations) based on projectors to targeted atomic valence orbitals. We discuss the premises, theory, and implementation of the idea, and several of its variations are tested. To investigate the performance and accuracy, we calculate the excitation energies for various transition-metal complexes in typical application scenarios. Additionally, we follow the homolytic bond breaking process of a Fenton reaction along its reaction coordinate. While the described AVAS technique is not a universal solution to the active space problem, its premises are fulfilled in many application scenarios of transition-metal chemistry and bond dissociation processes. In these cases the technique makes MR calculations easier to execute, easier to reproduce by any user, and simplifies the determination of the appropriate size of the active space required for accurate results.

CURRENT AND KINETIC HELICITY OF LONG-LIVED ACTIVITY COMPLEXES

International Nuclear Information System (INIS)

Komm, Rudolf; Gosain, Sanjay

2015-01-01

We study long-lived activity complexes and their current helicity at the solar surface and their kinetic helicity below the surface. The current helicity has been determined from synoptic vector magnetograms from the NSO/SOLIS facility, and the kinetic helicity of subsurface flows has been determined with ring-diagram analysis applied to full-disk Dopplergrams from NSO/GONG and SDO/HMI. Current and kinetic helicity of activity complexes follow the hemispheric helicity rule with mainly positive values (78%; 78%, respectively, with a 95% confidence level of 31%) in the southern hemisphere and negative ones (80%; 93%, respectively, with a 95% confidence level of 22% and 14%, respectively) in the northern hemisphere. The locations with the dominant sign of kinetic helicity derived from Global Oscillation Network Group (GONG) and SDO/HMI data are more organized than those of the secondary sign even if they are not part of an activity complex, while locations with the secondary sign are more fragmented. This is the case for both hemispheres even for the northern one where it is not as obvious visually due to the large amount of magnetic activity present as compared to the southern hemisphere. The current helicity shows a similar behavior. The dominant sign of current helicity is the same as that of kinetic helicity for the majority of the activity complexes (83% with a 95% confidence level of 15%). During the 24 Carrington rotations analyzed here, there is at least one longitude in each hemisphere where activity complexes occur repeatedly throughout the epoch. These ''active'' longitudes are identifiable as locations of strong current and kinetic helicity of the same sign

ASIC-like, proton-activated currents in rat hippocampal neurons.

Science.gov (United States)

Baron, Anne; Waldmann, Rainer; Lazdunski, Michel

2002-03-01

The expression of mRNA for acid sensing ion channels (ASIC) subunits ASIC1a, ASIC2a and ASIC2b has been reported in hippocampal neurons, but the presence of functional hippocampal ASIC channels was never assessed. We report here the first characterization of ASIC-like currents in rat hippocampal neurons in primary culture. An extracellular pH drop induces a transient Na(+) current followed by a sustained non-selective cation current. This current is highly sensitive to pH with an activation threshold around pH 6.9 and a pH(0.5) of 6.2. About half of the total peak current is inhibited by the spider toxin PcTX1, which is specific for homomeric ASIC1a channels. The remaining PcTX1-resistant ASIC-like current is increased by 300 microM Zn(2+) and, whereas not fully activated at pH 5, it shows a pH(0.5) of 6.0 between pH 7.4 and 5. We have previously shown that Zn(2+) is a co-activator of ASIC2a-containing channels. Thus, the hippocampal transient ASIC-like current appears to be generated by a mixture of homomeric ASIC1a channels and ASIC2a-containing channels, probably heteromeric ASIC1a+2a channels. The sustained non-selective current suggests the involvement of ASIC2b-containing heteromeric channels. Activation of the hippocampal ASIC-like current by a pH drop to 6.9 or 6.6 induces a transient depolarization which itself triggers an initial action potential (AP) followed by a sustained depolarization and trains of APs. Zn(2+) increases the acid sensitivity of ASIC channels, and consequently neuronal excitability. It is probably an important co-activator of ASIC channels in the central nervous system.

Towards the design of 3D multiscale instructive tissue engineering constructs: Current approaches and trends.

Science.gov (United States)

Oliveira, Sara M; Reis, Rui L; Mano, João F

2015-11-01

The design of 3D constructs with adequate properties to instruct and guide cells both in vitro and in vivo is one of the major focuses of tissue engineering. Successful tissue regeneration depends on the favorable crosstalk between the supporting structure, the cells and the host tissue so that a balanced matrix production and degradation are achieved. Herein, the major occurring events and players in normal and regenerative tissue are overviewed. These have been inspiring the selection or synthesis of instructive cues to include into the 3D constructs. We further highlight the importance of a multiscale perception of the range of features that can be included on the biomimetic structures. Lastly, we focus on the current and developing tissue-engineering approaches for the preparation of such 3D constructs: top-down, bottom-up and integrative. Bottom-up and integrative approaches present a higher potential for the design of tissue engineering devices with multiscale features and higher biochemical control than top-down strategies, and are the main focus of this review. Copyright © 2015 Elsevier Inc. All rights reserved.

Behind the Scenes of Public Construction Clients – Collecting Data on Commissioning Activities and Organisational Approach

OpenAIRE

Hermans, Marleen; Eisma, Pieter

2015-01-01

The understanding of public commissioning activity is fairly limited, with national and European research primarily focusing on large scale projects, European procurement procedures and new construction. However, most construction activities involve small scale projects and assignments performed by smaller scale semi-public organisations such as hospitals, schools or housing associations. Similarities and differences between new construction and asset management have not received ample attent...

Behind the Scenes of Public Construction Clients – Collecting Data on Commissioning Activities and Organisational Approach

NARCIS (Netherlands)

Hermans, M.H.; Eisma, P.R.

2015-01-01

The understanding of public commissioning activity is fairly limited, with national and European research primarily focusing on large scale projects, European procurement procedures and new construction. However, most construction activities involve small scale projects and assignments performed by

Construction feasibility of OTEC platforms. Final report

Energy Technology Data Exchange (ETDEWEB)

Brewer, J H; Harwood, P; Solberg, K; Fjeld, S

1978-12-01

This study provides an evaluation of the feasibility of constructing either steel or concrete OTEC platforms of both spar and ship shape configurations for a range of platform sizes with respect to existing, developed shipyard or fabrication yard facilities that are currently active in marine vessel construction within the US. This brief study is quite broad in scope. Many parameters, including plant size; vessel type, size, configuration, and dimensions; position of heat exchangers; existing construction facility size, geographic location, and potential for modification; and, availability of undeveloped deep water construction sites affect the conclusions drawn. Nevertheless, the conclusions should remain valid and not change significantly, unless there are major changes in either vessel size or US construction capabilities. The various concepts are ranked in order of their feasibility and practicality of construction in existing or modified existing facilities and new facilities.

Current developments at Giprokoks for coke-battery construction and reconstruction

Energy Technology Data Exchange (ETDEWEB)

V.I. Rudyka; Y.E. Zingerman; V.B. Kamenyuka; O.N. Surenskii; G.E. Kos' kova; V.V. Derevich; V.A. Gushchin [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15

Approaches developed at Giprokoks for coke-battery construction and reconstruction are considered. Recommendations regarding furnace construction and reconstruction are made on the basis of Ukrainian and world experience.

ANALYSIS OF THE CONCEPT OF "GREEN" CONSTRUCTION AS A VEHICLE TO ENSURE THE ENVIRONMENTAL SAFETY OF CONSTRUCTION ACTIVITIES

Directory of Open Access Journals (Sweden)

Benuzh Andrey Aleksandrovich

2012-12-01

Full Text Available The authors demonstrate that the number of buildings in the world exceeds one billion according to the statistical data; their potential negative impact on the environment can be disastrous; moreover, the main cause of the ever-growing demand for buildings consists in the constant growth of the world population that makes the global environmental situation even more complicated. As a main conception, the authors focus on the concept of sustainable development. They consider that the core idea of this concept is that the present-day generation should do everything in their power to preserve the natural environment and its resources for the future generations. The authors mention that back in the middle of the 20th century academician V.I. Vernadsky formulated the concept of the noosphere closely linked to the notion of sustainable development. According to the authors, "green" construction can be considered as a vehicle for sustainable development of territories that accommodate construction sites. The authors define "green" construction as a comprehensive system of knowledge structured on the basis of design and construction standards. "Green" buildings demonstrate their high construction quality along with minimal costs and maximal comfort. Although a "green" technology is a new and not the simplest way of development, it has proven its incredible efficiency. The major achievement of the authors consists in the classification of principles, approaches and available technologies that can be applied or are applied in the "green" construction to ensure the environmental safety of construction activities. The authors have also selected environmental, economic and social benefits of "green" construction and provided their recommendations concerning the implementation of "green" technologies in Russia.

Construction of the yeast whole-cell Rhizopus oryzae lipase biocatalyst with high activity.

Science.gov (United States)

Chen, Mei-ling; Guo, Qin; Wang, Rui-zhi; Xu, Juan; Zhou, Chen-wei; Ruan, Hui; He, Guo-qing

2011-07-01

Surface display is effectively utilized to construct a whole-cell biocatalyst. Codon optimization has been proven to be effective in maximizing production of heterologous proteins in yeast. Here, the cDNA sequence of Rhizopus oryzae lipase (ROL) was optimized and synthesized according to the codon bias of Saccharomyces cerevisiae, and based on the Saccharomyces cerevisiae cell surface display system with α-agglutinin as an anchor, recombinant yeast displaying fully codon-optimized ROL with high activity was successfully constructed. Compared with the wild-type ROL-displaying yeast, the activity of the codon-optimized ROL yeast whole-cell biocatalyst (25 U/g dried cells) was 12.8-fold higher in a hydrolysis reaction using p-nitrophenyl palmitate (pNPP) as the substrate. To our knowledge, this was the first attempt to combine the techniques of yeast surface display and codon optimization for whole-cell biocatalyst construction. Consequently, the yeast whole-cell ROL biocatalyst was constructed with high activity. The optimum pH and temperature for the yeast whole-cell ROL biocatalyst were pH 7.0 and 40 °C. Furthermore, this whole-cell biocatalyst was applied to the hydrolysis of tributyrin and the resulted conversion of butyric acid reached 96.91% after 144 h.

NASA Lunar Mining and Construction Activities and Plans

Science.gov (United States)

Sanders, Gerald B.; Larson, William E.; Sacksteder, Kurt R.

2009-01-01

the need to implement efforts that are sustainable and affordable. One area NASA is developing that can significantly change how systems required for sustained human presence are designed and integrated, as well as potentially break our reliance on Earth supplied logistics, is In-Situ Resource Utilization (ISRU). ISRU, also known living off the land, involves the extraction and processing of local resources into useful products. In particular, the ability to make propellants, life support consumables, fuel cell reagents, and radiation shielding can significantly reduce the cost, mass, and risk of sustained human activities beyond Earth. Also, the ability to modify the lunar landscape for safer landing, transfer of payloads from the lander an outpost, dust generation mitigation, and infrastructure placement and buildup are also extremely important for long-term lunar operations. While extra-terrestrial excavation, material handling and processing, and site preparation and construction may be new to NASA and other space agencies, there is extensive terrestrial hardware and commercial experience that can be leveraged. This paper will provide an overview of current NASA activities in lunar ISRU mining and construction and how terrestrial experience in these areas are important to achieving the goal of affordable and sustainable human exploration.

A review on the current issues and barriers of Industrialised Building System (IBS) adoption in Malaysia’s construction industry

Science.gov (United States)

Amin, M. A. Mohd; Abas, N. H.; Shahidan, S.; Rahmat, M. H.; Suhaini, N. A.; Nagapan, S.; Rahim, R. Abdul

2017-11-01

Malaysia considers the construction industry as one of the main contributors to its Gross Domestic Product (GDP). However, there are some unresolved issues arising from the ongoing and widespread adoption of the conventional method of construction such as the resultant fragmentation of the industry itself; delays in production and delivery time of unnecessary wastages and lack of sustainability practice. Malaysian Government has been continuously encouraging the industry to use, partly or if not wholly, the Industrialized Building System (IBS), which is considered to be an important part of sustainable construction initiative. IBS was introduced to Malaysia as the solution to issues related to dependencies of foreign workers, raising demand for affordable accommodations and improving image, quality and productivity of construction industry. However, the IBS adoption in Malaysia remains low. This paper presents the review of the current issues and barriers of IBS adoption in Malaysian construction industry.

Modifiable Psychosocial Constructs Associated With Physical Activity Participation in People With Multiple Sclerosis: A Systematic Review and Meta-Analysis.

Science.gov (United States)

Casey, Blathin; Coote, Susan; Shirazipour, Celina; Hannigan, Ailish; Motl, Robert; Martin Ginis, Kathleen; Latimer-Cheung, Amy

2017-07-01

To synthesize current knowledge of the modifiable psychosocial constructs associated with physical activity (PA) participation in people with multiple sclerosis. A search was conducted through October 2015 in 8 electronic databases: CINAHL, PubMed, SPORTDiscus, Web of Knowledge, MEDLINE, EMBASE, Cochrane Database of Systematic Reviews, and PsycINFO. Cohort and intervention studies were included if they (1) included an objective or subjective measure of PA; (2) measured at least 1 modifiable psychosocial construct; and (3) reported bivariate correlations (or these could be extracted) between the PA and psychosocial construct measures. A total of 13,867 articles were screened for inclusion, and 26 were included in the final analysis. Meta-analyses of correlations were conducted using the Hedges-Olkin method. Where a meta-analysis was not possible, results were reported descriptively. Meta-analyses indicated a pooled correlation coefficient between (1) objective PA and self-efficacy (n=7) of r=.30 (Pgoal-setting (n=5) of r=.44 (Pgoal-setting. However, there is a need to explore the associations between other constructs outside those reported in this review. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Adolescents' physical activity is associated with previous and current physical activity practice by their parents.

Science.gov (United States)

Christofaro, Diego Giulliano Destro; Andersen, Lars Bo; Andrade, Selma Maffei de; Barros, Mauro Virgílio Gomes de; Saraiva, Bruna Thamyres Ciccotti; Fernandes, Rômulo Araújo; Ritti-Dias, Raphael Mendes

The purpose of this study was to determine whether parents' current and previous physical activity practice is associated with adolescents' physical activity. The sample was composed of 1231 adolescents (14-17 years), and 1202 mothers and 871 fathers were interviewed. Weight and height of the adolescents were measured. Self-reported parents' weight and height were obtained. The current and previous physical activity levels (Baecke's questionnaire) of parents (during childhood and adolescence) and adolescents' physical activity levels were obtained using a questionnaire. The magnitude of the associations between parent and adolescent physical activity levels was determined by binary logistic regression (adjusted by sex, age, and socioeconomic level of adolescents and education level of parents). The current physical activity practice by parents was associated with adolescents' physical activity (p<0.001). The physical activities reported by parents in their childhood and adolescence were also associated with higher physical activity levels among adolescents. Adolescents whose parents were both physically active in the past and present were six times (OR=6.67 [CI=1.94-22.79]) more likely to be physically active compared to adolescents with no parents who were physically active in the past. The current and previous physical activities of parents were associated with higher levels of physical activity in adolescents, even after controlling for confounding factors. Copyright © 2017 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

Adolescents' physical activity is associated with previous and current physical activity practice by their parents

Directory of Open Access Journals (Sweden)

Diego Giulliano Destro Christofaro

Full Text Available Abstract Objective: The purpose of this study was to determine whether parents' current and previous physical activity practice is associated with adolescents' physical activity. Methods: The sample was composed of 1231 adolescents (14-17 years, and 1202 mothers and 871 fathers were interviewed. Weight and height of the adolescents were measured. Self-reported parents' weight and height were obtained. The current and previous physical activity levels (Baecke's questionnaire of parents (during childhood and adolescence and adolescents' physical activity levels were obtained using a questionnaire. The magnitude of the associations between parent and adolescent physical activity levels was determined by binary logistic regression (adjusted by sex, age, and socioeconomic level of adolescents and education level of parents. Results: The current physical activity practice by parents was associated with adolescents' physical activity (p < 0.001. The physical activities reported by parents in their childhood and adolescence were also associated with higher physical activity levels among adolescents. Adolescents whose parents were both physically active in the past and present were six times (OR = 6.67 [CI = 1.94-22.79] more likely to be physically active compared to adolescents with no parents who were physically active in the past. Conclusions: The current and previous physical activities of parents were associated with higher levels of physical activity in adolescents, even after controlling for confounding factors.

25 CFR 1000.244 - May the Secretary suspend construction activities under an AFA?

Science.gov (United States)

2010-04-01

... construction activities under an AFA? (a) The Secretary may require a Tribe/Consortium to suspend certain work under a construction portion of an AFA for up to 30 days only if: (1) Site conditions adversely affect health and safety; or (2) Work in progress or completed fails to substantially carry out the terms of the...

On active current selection for Lagrangian profilers

DEFF Research Database (Denmark)

Jouffroy, Jerome; Zhou, Qiuyang; Zielinski, Oliver

2013-01-01

simple and computationally-efficient control strategies to actively select and use ocean currents so that a profiler can autonomously reach a desired destination. After briefly presenting a typical profiler and possible mechanical modifications for a coastal environment, we introduce simple mathematical...... models for the profiler and the currents it will use. We then present simple feedback controllers that, using the direction of the currents and taking into account the configuration of the environment (coastal or deep-sea), is able to steer the profiler to any desired horizontal location. To illustrate...

Shortening of construction period of nuclear power plant. Activities of construction industry on construction period shortening

International Nuclear Information System (INIS)

Kamata, Hirofumi

2011-01-01

Total construction period could be shorten by prefabricating structures efficiently in another yard and reducing working hours on site, which would reduce work at height or congestion work and also upgrade safety at work. Construction period shortening would surely reduce expenses during work and advance operation start of electric utilities. Construction of reactor building, turbine building, water intake and drainage canal was performed on a relatively large scale and a big share of whole schedule. This article summarized basic technologies to shorten construction period for reactor building/turbine building and water intake and drainage canal. Advanced methods of reactor building/turbine building; (1) modularization of equipment and skeleton, (2) utilization of concrete mold, reinforcing bar and steel frame, (3) precedent steel frame method and (4) steel plate reinforced concrete (SC) method, were outlined and their application examples were shown to reduce work on site and improve work efficiency. As for water intake and drainage canal construction, (1) precast concrete method, (2) SC method and (3) steel plate shell method were described with application examples. Construction procedures and problems using mega block method for water intake and drainage canal were also introduced. (T. Tanaka)

Computer aided system engineering for space construction

Science.gov (United States)

Racheli, Ugo

1989-01-01

This viewgraph presentation covers the following topics. Construction activities envisioned for the assembly of large platforms in space (as well as interplanetary spacecraft and bases on extraterrestrial surfaces) require computational tools that exceed the capability of conventional construction management programs. The Center for Space Construction is investigating the requirements for new computational tools and, at the same time, suggesting the expansion of graduate and undergraduate curricula to include proficiency in Computer Aided Engineering (CAE) though design courses and individual or team projects in advanced space systems design. In the center's research, special emphasis is placed on problems of constructability and of the interruptability of planned activity sequences to be carried out by crews operating under hostile environmental conditions. The departure point for the planned work is the acquisition of the MCAE I-DEAS software, developed by the Structural Dynamics Research Corporation (SDRC), and its expansion to the level of capability denoted by the acronym IDEAS**2 currently used for configuration maintenance on Space Station Freedom. In addition to improving proficiency in the use of I-DEAS and IDEAS**2, it is contemplated that new software modules will be developed to expand the architecture of IDEAS**2. Such modules will deal with those analyses that require the integration of a space platform's configuration with a breakdown of planned construction activities and with a failure modes analysis to support computer aided system engineering (CASE) applied to space construction.

Planning Costs in Certain Stage of the Life Cycle of Investment Activity of Construction Organization

Directory of Open Access Journals (Sweden)

Iakymchuk Iryna M.

2017-09-01

Full Text Available The article discusses the issues related to planning costs in certain stages of the life-cycle of investment activity of construction organization. It has been specified that cost management based on the life-cycle model of the investment project, which is being implemented by a construction organization, allows for a consistent improvement in the efficiency of the innovation process on the basis of a clear planning, as well as cost forecasting. This approach allows for the long-term effectiveness of innovation project by providing cost-management services at all stages of investment project, identifying opportunities for reducing them, thereby contributing to sustainable development of construction organization over time. It has been concluded that the more specific the program of activities of construction organization, the more accurate the process of identification of costs becomes, the more efficient is the management of costs, targeted at saving resources, reducing the self cost of construction works.

Construction contracting for the 1990s

International Nuclear Information System (INIS)

Kane, C.; Lyon, V.F.

1991-01-01

This paper reports that power plant constructing during the 1980s is over. Demand growth projections presently anticipate a need for 100,000 MW of new capacity by the year 2000, with only a small percentage of the demand growth currently under construction. Given a six-year lead time for baseload plants, a surge of activity must now begin. Another development over the past five years has been a conscious decision by regulators in increase rates only for the costs of efficiently built plants. The cost of construction inefficiencies will no longer be shouldered by investors. Large construction claims, excessive cost overruns, and expensive delays will no longer be passed on to the consumer automatically. Utility commissions will require the inefficient builders to either clean up their act or forego building their own plants. The most traditional contracting scheme, general contracting, will probably be the lease desirable in the construction of new power plants. General contracting is a single, general construction contract based on a detailed design. The design is not performed by the general contractor

Fast inhibition of glutamate-activated currents by caffeine.

Directory of Open Access Journals (Sweden)

Nicholas P Vyleta

Full Text Available BACKGROUND: Caffeine stimulates calcium-induced calcium release (CICR in many cell types. In neurons, caffeine stimulates CICR presynaptically and thus modulates neurotransmitter release. METHODOLOGY/PRINCIPAL FINDINGS: Using the whole-cell patch-clamp technique we found that caffeine (20 mM reversibly increased the frequency and decreased the amplitude of miniature excitatory postsynaptic currents (mEPSCs in neocortical neurons. The increase in mEPSC frequency is consistent with a presynaptic mechanism. Caffeine also reduced exogenously applied glutamate-activated currents, confirming a separate postsynaptic action. This inhibition developed in tens of milliseconds, consistent with block of channel currents. Caffeine (20 mM did not reduce currents activated by exogenous NMDA, indicating that caffeine block is specific to non-NMDA type glutamate receptors. CONCLUSIONS/SIGNIFICANCE: Caffeine-induced inhibition of mEPSC amplitude occurs through postsynaptic block of non-NMDA type ionotropic glutamate receptors. Caffeine thus has both pre and postsynaptic sites of action at excitatory synapses.

Current fluctuations of interacting active Brownian particles

OpenAIRE

Pre, Trevor Grand; Limmer, David T.

2018-01-01

We derive the distribution function for particle currents for a system of interacting active Brownian particles in the long time limit using large deviation theory and a weighted many body expansion. We find the distribution is non-Gaussian, except in the limit of passive particles. The non-Gaussian fluctuations can be understood from the effective potential the particles experience when conditioned on a given current. This potential suppresses fluctuations of the particle's orientation, and ...

Current problems associated with nuclear plant construction contracts

International Nuclear Information System (INIS)

Albano, Raffaele.

1977-01-01

The expansion of nuclear electricity generating programmes has brought to the fore the problems associated with construction of this type of power plant. The paper analyses the contracts for such construction and describes the most common, the turnkey contract. The present tendency is to limit the scope of turnkey contracts to the nuclear system or simply to the reactor and this is especially common in advanced nuclear countries such as the US, Canada, Japan, UK and France, and this is also the case in Italy where the question of contracting nuclear plants is debated. In Germany the power utilities hold a large number of shares in the manufacturing industry and the turnkey contract is therefore more economically attractive. A detailed description of the contracting procedure is provided, including the suppliers' and purchasers' responsibilities, plant commissioning tests and handing over of the plant to the operator. (NEA) [fr

Towards green construction

International Nuclear Information System (INIS)

Bajracharya, Bijaya B.; Shrestha, Prasanna M.

2000-01-01

Sustainability is the key to any development works. In the operation phase, hydro power is the most sustainable form of energy. However construction activities for the same power station are usually far from being green. The popular myth is that construction activity converts green into grey. Despite this popular myth, construction of a hydro power project in Nepal has made the project area greener than earlier during the construction phase itself. Choice of construction technology, appropriate level of environmental impact assessment, monitoring of environmental parameters along side the construction progress followed by mitigation at the right time; launching community development programmes side by side, having environmental specification in contractual documents and self-reliance to fulfill environmental obligations by contractors itself are the key factors in the environmental management within the construction activities. The main conclusions in the paper is the need to change the way to think about the project constraints

Safety and environmental process for the design and construction of the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Brereton, S.J., LLNL

1998-05-27

The National Ignition Facility (NIF) is a U.S. Department of Energy (DOE) laser fusion experimental facility currently under construction at the Lawrence Livermore National Laboratory (LLNL). This paper describes the safety and environmental processes followed by NIF during the design and construction activities.

Potential and Benefits of Building Information Modeling (BIM) During Pre-Construction, Construction and Post Construction Stage

OpenAIRE

Aw Nien Wei; Md Azree Othuman Mydin

2017-01-01

The construction industry is the main economic support for all countries around the world in which continually adapting to meet competitive challenges around the global market. Nevertheless, the construction project is becoming much more complex and difficult to manage. This is because the construction project involves a large number of stakeholder, for example, the consultant companies, architects, engineers, building surveyors and quantity surveyors. The technology current...

De Novo Construction of Redox Active Proteins.

Science.gov (United States)

Moser, C C; Sheehan, M M; Ennist, N M; Kodali, G; Bialas, C; Englander, M T; Discher, B M; Dutton, P L

2016-01-01

Relatively simple principles can be used to plan and construct de novo proteins that bind redox cofactors and participate in a range of electron-transfer reactions analogous to those seen in natural oxidoreductase proteins. These designed redox proteins are called maquettes. Hydrophobic/hydrophilic binary patterning of heptad repeats of amino acids linked together in a single-chain self-assemble into 4-alpha-helix bundles. These bundles form a robust and adaptable frame for uncovering the default properties of protein embedded cofactors independent of the complexities introduced by generations of natural selection and allow us to better understand what factors can be exploited by man or nature to manipulate the physical chemical properties of these cofactors. Anchoring of redox cofactors such as hemes, light active tetrapyrroles, FeS clusters, and flavins by His and Cys residues allow cofactors to be placed at positions in which electron-tunneling rates between cofactors within or between proteins can be predicted in advance. The modularity of heptad repeat designs facilitates the construction of electron-transfer chains and novel combinations of redox cofactors and new redox cofactor assisted functions. Developing de novo designs that can support cofactor incorporation upon expression in a cell is needed to support a synthetic biology advance that integrates with natural bioenergetic pathways. © 2016 Elsevier Inc. All rights reserved.

Promoting Constructive Activities that Support Vicarious Learning during Computer-Based Instruction

Science.gov (United States)

Gholson, Barry; Craig, Scotty D.

2006-01-01

This article explores several ways computer-based instruction can be designed to support constructive activities and promote deep-level comprehension during vicarious learning. Vicarious learning, discussed in the first section, refers to knowledge acquisition under conditions in which the learner is not the addressee and does not physically…

Working capital management in the process of financial support of investment and construction projects and of the construction material industry

Science.gov (United States)

Danilochkina, Nadezhda; Lukmanova, Inessa; Roshchina, Olga; Voytolovskiy, Nikolay

2018-03-01

The article presents the analysis of working capital in the process of financial support of high-rise construction investment projects. The factors influencing the choice of the working capital management model were analyzed, the reasons of the change in the requirement for the values of current assets in the process of construction of high-rise facilities were determined. The author has developed the scheme of interrelation between production, operational and financial activity cycles of enterprises implementing investment projects of unique buildings and structures and made a comparative description of their financing sources.

Energy Model of Neuron Activation.

Science.gov (United States)

Romanyshyn, Yuriy; Smerdov, Andriy; Petrytska, Svitlana

2017-02-01

On the basis of the neurophysiological strength-duration (amplitude-duration) curve of neuron activation (which relates the threshold amplitude of a rectangular current pulse of neuron activation to the pulse duration), as well as with the use of activation energy constraint (the threshold curve corresponds to the energy threshold of neuron activation by a rectangular current pulse), an energy model of neuron activation by a single current pulse has been constructed. The constructed model of activation, which determines its spectral properties, is a bandpass filter. Under the condition of minimum-phase feature of the neuron activation model, on the basis of Hilbert transform, the possibilities of phase-frequency response calculation from its amplitude-frequency response have been considered. Approximation to the amplitude-frequency response by the response of the Butterworth filter of the first order, as well as obtaining the pulse response corresponding to this approximation, give us the possibility of analyzing the efficiency of activating current pulses of various shapes, including analysis in accordance with the energy constraint.

Plasmid construction using recombination activity in the fission yeast Schizosaccharomyces pombe.

Directory of Open Access Journals (Sweden)

Ayako Chino

Full Text Available BACKGROUND: Construction of plasmids is crucial in modern genetic manipulation. As of now, the common method for constructing plasmids is to digest specific DNA sequences with restriction enzymes and to ligate the resulting DNA fragments with DNA ligase. Another potent method to construct plasmids, known as gap-repair cloning (GRC, is commonly used in the budding yeast Saccharomyces cerevisiae. GRC makes use of the homologous recombination activity that occurs within the yeast cells. Due to its flexible design and efficiency, GRC has been frequently used for constructing plasmids with complex structures as well as genome-wide plasmid collections. Although there have been reports indicating GRC feasibility in the fission yeast Schizosaccharomyces pombe, this species is not commonly used for GRC as systematic studies of reporting GRC efficiency in S. pombe have not been performed till date. METHODOLOGY/PRINCIPAL FINDINGS: We investigated GRC efficiency in S. pombe in this study. We first showed that GRC was feasible in S. pombe by constructing a plasmid that contained the LEU2 auxotrophic marker gene in vivo and showed sufficient efficiency with short homology sequences (>25 bp. No preference was shown for the sequence length from the cut site in the vector plasmid. We next showed that plasmids could be constructed in a proper way using 3 DNA fragments with 70% efficiency without any specific selections being made. The GRC efficiency with 3 DNA fragments was dramatically increased >95% in lig4Delta mutant cell, where non-homologous end joining is deficient. Following this approach, we successfully constructed plasmid vectors with leu1+, ade6+, his5+, and lys1+ markers with the low-copy stable plasmid pDblet as a backbone by applying GRC in S. pombe. CONCLUSIONS/SIGNIFICANCE: We concluded that GRC was sufficiently feasible in S. pombe for genome-wide gene functional analysis as well as for regular plasmid construction. Plasmids with different

The construction of airfoil pressure models by the plate method: Achievements, current research, technology development and potential applications

Science.gov (United States)

Lawing, P. L.

1985-01-01

A method of constructing airfoils by inscribing pressure channels on the face of opposing plates, bonding them together to form one plate with integral channels, and contour machining this plate to form an airfoil model is described. The research and development program to develop the bonding technology is described as well as the construction and testing of an airfoil model. Sample aerodynamic data sets are presented and discussed. Also, work currently under way to produce thin airfoils with camber is presented. Samples of the aft section of a 6 percent airfoil with complete pressure instrumentation including the trailing edge are pictured and described. This technique is particularly useful in fabricating models for transonic cryogenic testing, but it should find application in a wide ange of model construction projects, as well as the fabrication of fuel injectors, space hardware, and other applications requiring advanced bonding technology and intricate fluid passages.

Construction and demolition waste indicators.

Science.gov (United States)

Mália, Miguel; de Brito, Jorge; Pinheiro, Manuel Duarte; Bravo, Miguel

2013-03-01

The construction industry is one of the biggest and most active sectors of the European Union (EU), consuming more raw materials and energy than any other economic activity. Furthermore, construction waste is the commonest waste produced in the EU. Current EU legislation sets out to implement construction and demolition waste (CDW) prevention and recycling measures. However it lacks tools to accelerate the development of a sector as bound by tradition as the building industry. The main objective of the present study was to determine indicators to estimate the amount of CDW generated on site both globally and by waste stream. CDW generation was estimated for six specific sectors: new residential construction, new non-residential construction, residential demolition, non-residential demolition, residential refurbishment, and non-residential refurbishment. The data needed to develop the indicators was collected through an exhaustive survey of previous international studies. The indicators determined suggest that the average composition of waste generated on site is mostly concrete and ceramic materials. Specifically for new residential and new non-residential construction the production of concrete waste in buildings with a reinforced concrete structure lies between 17.8 and 32.9 kg m(-2) and between 18.3 and 40.1 kg m(-2), respectively. For the residential and non-residential demolition sectors the production of this waste stream in buildings with a reinforced concrete structure varies from 492 to 840 kg m(-2) and from 401 to 768 kg/m(-2), respectively. For the residential and non-residential refurbishment sectors the production of concrete waste in buildings lies between 18.9 and 45.9 kg/m(-2) and between 18.9 and 191.2 kg/m(-2), respectively.

NASA's current activities in free space optical communications

Science.gov (United States)

Edwards, Bernard L.

2017-11-01

NASA and other space agencies around the world are currently developing free space optical communication systems for both space-to-ground links and space-to-space links. This paper provides an overview of NASA's current activities in free space optical communications with a focus on Near Earth applications. Activities to be discussed include the Lunar Laser Communication Demonstration, the Laser Communications Relay Demonstration, and the commercialization of the underlying technology. The paper will also briefly discuss ongoing efforts and studies for Deep Space optical communications. Finally the paper will discuss the development of international optical communication standards within the Consultative Committee for Space Data Systems.

Learning through delivery, Westinghouse AP1000 plant construction

International Nuclear Information System (INIS)

Gorgemans, J.; Hinman, R.D.; Steuck, C.M.; Greco, P.L.

2014-01-01

The AP1000 plant, which is a 1100 MWe class pressurized water reactor with passive safety features, is designed around a conventional 2 loop, 2 steam generator primary system configuration with 2 hot legs, 4 reactor coolant pumps directly mounted in the steam generator lower head and 4 cold legs. A particular feature of AP1000 is its modular construction to minimize the time and cost of construction. Modular construction allows activities to be run in parallel, it allows more activities to be performed in a controlled factory instead of in the field, and it provides a better level of quality. The AP1000 plant design includes 106 structural modules and 52 mechanical modules. Structural modules include all penetrations for piping, cable trays, HVAC duct runs, and all reinforcement for pipe, equipment hangers, and supports. Structural modules are shipped in sub-modules to support transportation by rail or truck or barge. Mechanical modules contain equipment such as pumps, tanks, heat exchangers, air-handling units, and filters along with interconnecting pipes, valves, instruments, wiring and support services. Modular construction requires strong coordination between engineering, supply chain and construction. A total of 8 AP1000 units are currently under construction in China and in the United States. The lessons learned and best practices of each new AP1000 construction are systematically incorporated into the standard design. (A.C.)

25 CFR 1000.246 - Must an AFA that contains a construction project or activity incorporate provisions of Federal...

Science.gov (United States)

2010-04-01

... as possible in the construction process. If Tribal construction standards are consistent with or... 25 Indians 2 2010-04-01 2010-04-01 false Must an AFA that contains a construction project or activity incorporate provisions of Federal construction standards? 1000.246 Section 1000.246 Indians OFFICE...

Constructive alignment of a research-informed teaching activity within an undergraduate diagnostic radiography curriculum: A reflection

International Nuclear Information System (INIS)

Higgins, R.; Hogg, P.; Robinson, L.

2017-01-01

Aim: To evaluate the learning experience of a level 5 (year 2) student cohort within a research-informed teaching (RiT) activity and to map findings against learning outcomes and level descriptors using constructive alignment. Method: An online questionnaire was used to explore the level 5 student experience of a Research-informed Teaching (RiT) activity. Responses were retrospectively mapped against Framework for Higher Education Qualifications (FHEQ) level descriptors for level 5 using constructive alignment. Results and Discussion: Thirty one out of 46 level 5 students completed the questionnaire (67% response rate). Analysis of the questionnaire supported the integration of this RiT activity within the curriculum in terms of learning and research skill development by students. However, it was identified that this activity could be revised further to better align with level 5 descriptors and incorporate additional higher level cognitive processes. Conclusion: Learning outcomes for this RiT activity were constructively aligned with FHEQ level 5 descriptors. Recommendations are provided on how these could be further refined to ensure students undertake a more critical approach to the application of theory into practice. Discussion also considers how this process could be used to develop a similar RiT activity at level 6 (year 3). - Highlights: • Constructive alignment helped to ensure that the learning outcomes were appropriately aligned with level 5 descriptors. • Reflection identified outcomes that required further improvement to focus on higher-order thinking and application skills. • This article also illustrates how this process could be used to develop a level 6 RiT activity.

Assessment of modular construction for safety-related structures at advanced nuclear power plants

International Nuclear Information System (INIS)

Braverman, J.; Morante, R.; Hofmayer, C.

1997-03-01

Modular construction techniques have been successfully used in a number of industries, both domestically and internationally. Recently, the use of structural modules has been proposed for advanced nuclear power plants. The objective in utilizing modular construction is to reduce the construction schedule, reduce construction costs, and improve the quality of construction. This report documents the results of a program which evaluated the proposed use of modular construction for safety-related structures in advanced nuclear power plant designs. The program included review of current modular construction technology, development of licensing review criteria for modular construction, and initial validation of currently available analytical techniques applied to concrete-filled steel structural modules. The program was conducted in three phases. The objective of the first phase was to identify the technical issues and the need for further study in order to support NRC licensing review activities. The two key findings were the need for supplementary review criteria to augment the Standard Review Plan and the need for verified design/analysis methodology for unique types of modules, such as the concrete-filled steel module. In the second phase of this program, Modular Construction Review Criteria were developed to provide guidance for licensing reviews. In the third phase, an analysis effort was conducted to determine if currently available finite element analysis techniques can be used to predict the response of concrete-filled steel modules

The impact of labour productivity on the Swedish construction industries

OpenAIRE

Forsberg, Azam

2007-01-01

There have been debates concerning what can be done about the current low labour productivity in the Swedish construction industries. High production cost in the construction industries has been a burning issue for a long time. On the other hand, process industries and organisations have taken the advantage of labour productivity measurement to reduce their production cost and eliminate non value-added activities. The purpose of this paper is to examine, why and how the process industries and...

Consideration of the legal system required for achievement of current nuclear power plant construction programmes

International Nuclear Information System (INIS)

Castellon Fernandez, E.; Forum Atomico Espanol, Madrid)

1976-01-01

The extensive nuclear power plant construction programmes currently in progress in western countries require updating of the legislation in force in this field, especially as regards the following: acquisition of the sites necessary by means of a national planning programme of available sites; simplification of formalities concerning issuance of administrative licenses; revision of the principle of absolute and exclusive liability of the nuclear operator which forms the basis of the third party liability system for nuclear damage; radioactive waste management and decommissioning of nuclear plants. Furthermore, this new legislation should be harmonized between the different countries concerned. (N.E.A.) [fr

Current construction status of Korea Wolsong Nuclear Environment Management Center (low and intermediate level radioactive waste disposal facility)

International Nuclear Information System (INIS)

Suzuki, Yasuo

2010-01-01

Through the RANDEC delegation tour to Korea in Nov. 2009, we have earned new information on recent development of the radioactive waste management in Korea. In this report, we will introduce such development in Korea, focusing on the current construction status of Korean LILW (low and intermediate level radioactive waste) disposal site, now called, Wolsong Nuclear Environment Management Center. (author)

Occupational radioactive contamination of cement handlers of the civil construction

International Nuclear Information System (INIS)

Santos, Pedro Lopes dos; Gouvea, Rita de Cassia dos Santos; Kelecom, Alphonse; Dutra, Iedo Ramos

1999-01-01

Due to their occupational activities, several classes of workers are exposed to radioactive contamination by materials they handle and that contain traces of uranium and its descendants. This is the case of people that work in the civil construction and that currently handle Portland cement. Among other radioactive elements, cement contains the highly radiotoxic polonium-210 which may promote skin cancer because of its high specific activity and high LET α-particle it emits. Concentrations of polonium-210 are reported for urine, hair and skin smear of workers of the civil construction that usually handle cement. The results are compared to a control group. (author)

Pituitary adenylate cyclase activating polypeptide reduces A-type K+ currents and caspase activity in cultured adult mouse olfactory neurons.

Science.gov (United States)

Han, P; Lucero, M T

2005-01-01

Pituitary adenylate cyclase activating polypeptide has been shown to reduce apoptosis in neonatal cerebellar and olfactory receptor neurons, however the underlying mechanisms have not been elucidated. In addition, the neuroprotective effects of pituitary adenylate cyclase activating polypeptide have not been examined in adult tissues. To study the effects of pituitary adenylate cyclase activating polypeptide on neurons in apoptosis, we measured caspase activation in adult olfactory receptor neurons in vitro. Interestingly, we found that the protective effects of pituitary adenylate cyclase activating polypeptide were related to the absence of a 4-aminopyridine (IC50=144 microM) sensitive rapidly inactivating potassium current often referred to as A-type current. In the presence of 40 nM pituitary adenylate cyclase activating polypeptide 38, both A-type current and activated caspases were significantly reduced. A-type current reduction by pituitary adenylate cyclase activating polypeptide was blocked by inhibiting the phospholipase C pathway, but not the adenylyl cyclase pathway. Our observation that 5 mM 4-aminopyridine mimicked the caspase inhibiting effects of pituitary adenylate cyclase activating polypeptide indicates that A-type current is involved in apoptosis. This work contributes to our growing understanding that potassium currents are involved with the activation of caspases to affect the balance between cell life and death.

Altering the use of agricultural into construction land: Practice and trends

Directory of Open Access Journals (Sweden)

Počuča Milan

2015-01-01

Full Text Available Preservation of agricultural land as an imperative of prosperity of agriculture of the Republic of Serbia needs to be observed through causal questions as well, such as change of purpose of agricultural land into construction land, which is necessarily followed by conversion, a decade-long problem. Insufficiently resolved current questions of the aforementioned within legislative framework open up the possibility for improper use and exploitation of agricultural land. It is necessary to regulate the issue of conversion of construction land by legislative regulations i.e. altering use rights into property rights on construction land, and by doing so, open the way to investments in the Republic of Serbia. With the analysis of the effects of conversion and the adoption of a special law on this issue, construction activity would further prosper. The aim of this paper is to assess adequately the current problems of consumption, preservation and actual implementation of transferring agricultural land to construction land, with a view of the facts, practices and tendencies.

Construction of novel Saccharomyces cerevisiae strains for bioethanol active dry yeast (ADY) production.

Science.gov (United States)

Zheng, Daoqiong; Zhang, Ke; Gao, Kehui; Liu, Zewei; Zhang, Xing; Li, Ou; Sun, Jianguo; Zhang, Xiaoyang; Du, Fengguang; Sun, Peiyong; Qu, Aimin; Wu, Xuechang

2013-01-01

The application of active dry yeast (ADY) in bioethanol production simplifies operation processes and reduces the risk of bacterial contamination. In the present study, we constructed a novel ADY strain with improved stress tolerance and ethanol fermentation performances under stressful conditions. The industrial Saccharomyces cerevisiae strain ZTW1 showed excellent properties and thus subjected to a modified whole-genome shuffling (WGS) process to improve its ethanol titer, proliferation capability, and multiple stress tolerance for ADY production. The best-performing mutant, Z3-86, was obtained after three rounds of WGS, producing 4.4% more ethanol and retaining 2.15-fold higher viability than ZTW1 after drying. Proteomics and physiological analyses indicated that the altered expression patterns of genes involved in protein metabolism, plasma membrane composition, trehalose metabolism, and oxidative responses contribute to the trait improvement of Z3-86. This work not only successfully developed a novel S. cerevisiae mutant for application in commercial bioethanol production, but also enriched the current understanding of how WGS improves the complex traits of microbes.

Construction of novel Saccharomyces cerevisiae strains for bioethanol active dry yeast (ADY production.

Directory of Open Access Journals (Sweden)

Daoqiong Zheng

Full Text Available The application of active dry yeast (ADY in bioethanol production simplifies operation processes and reduces the risk of bacterial contamination. In the present study, we constructed a novel ADY strain with improved stress tolerance and ethanol fermentation performances under stressful conditions. The industrial Saccharomyces cerevisiae strain ZTW1 showed excellent properties and thus subjected to a modified whole-genome shuffling (WGS process to improve its ethanol titer, proliferation capability, and multiple stress tolerance for ADY production. The best-performing mutant, Z3-86, was obtained after three rounds of WGS, producing 4.4% more ethanol and retaining 2.15-fold higher viability than ZTW1 after drying. Proteomics and physiological analyses indicated that the altered expression patterns of genes involved in protein metabolism, plasma membrane composition, trehalose metabolism, and oxidative responses contribute to the trait improvement of Z3-86. This work not only successfully developed a novel S. cerevisiae mutant for application in commercial bioethanol production, but also enriched the current understanding of how WGS improves the complex traits of microbes.

Constructive alignment of a research-informed teaching activity within an undergraduate diagnostic radiography curriculum: A reflection.

Science.gov (United States)

Higgins, R; Hogg, P; Robinson, L

2017-09-01

To evaluate the learning experience of a level 5 (year 2) student cohort within a research-informed teaching (RiT) activity and to map findings against learning outcomes and level descriptors using constructive alignment. An online questionnaire was used to explore the level 5 student experience of a Research-informed Teaching (RiT) activity. Responses were retrospectively mapped against Framework for Higher Education Qualifications (FHEQ) level descriptors for level 5 using constructive alignment. Thirty one out of 46 level 5 students completed the questionnaire (67% response rate). Analysis of the questionnaire supported the integration of this RiT activity within the curriculum in terms of learning and research skill development by students. However, it was identified that this activity could be revised further to better align with level 5 descriptors and incorporate additional higher level cognitive processes. Learning outcomes for this RiT activity were constructively aligned with FHEQ level 5 descriptors. Recommendations are provided on how these could be further refined to ensure students undertake a more critical approach to the application of theory into practice. Discussion also considers how this process could be used to develop a similar RiT activity at level 6 (year 3). Copyright © 2016 The College of Radiographers. Published by Elsevier Ltd. All rights reserved.

AN ACD DIAGRAM DEVELOPED FOR SIMULATING A BRIDGE CONSTRUCTION OPERATION

Directory of Open Access Journals (Sweden)

Fahimeh Zaeri

2014-12-01

Full Text Available Success in the performance of construction projects can be substantially enhanced if plans are formulated more realistically, ahead of time. Planning includes identifying project activities, required resources, interdependencies, and also recognizing the uncertainties in the duration of activities. Inherent features of construction projects, such as high repetition, complexity and uniqueness on the one hand, and advances in technology and methodologies on the other, create more difficulties in planning construction delivery. This is true for bridge operations. This study presents an innovative incremental beam launching method with twin truss gantry. This construction method has significant advantages in terms of cost and speed of performance, but increases the level of planning and management required for the bridge operation. Further, because of the newness of the method, no specific Work Breakdown Structure nor conceptual framework has been developed as yet. The aim of the current study is to explore the use of a simulation-based tool (EZStrobe to facilitate the planning and management of a bridge construction operation (case study. The process followed in the development of a conceptual framework for the case study project is described. An Activity Cycle Diagram is produced alongside the conceptual framework and process models, with the intent of illustrating the key steps in the simulation modelling method. The developed models could assist in scheduling and controlling inherent construction features such as uncertainties, complexities, and repetitions in bridge construction projects, consequently improving their delivery.

Overview regarding construction and demolition waste in Spain.

Science.gov (United States)

Rodríguez-Robles, Desirée; García-González, Julia; Juan-Valdés, Andrés; Morán-Del Pozo, Julia M; Guerra-Romero, M Ignacio

2015-01-01

The construction sector comprises a number of activities that may result in environmental impacts of considerable magnitude, waste generation being one of the major negative effects of this industry due to the large streams generated. Proper knowledge of the environmental problem caused by the sector is of great importance in order to achieve an effective waste management. Thus, this paper analyse the Spanish situation regarding construction and demolition waste (CDW) compared with other European Union countries; which sets out the current figures of the CDW scenario (legislation, generation, composition, treatment and market) as well as the difficulties encountered when handling this residue.

Modern Methods for Cost Management in Construction Enterprises

Directory of Open Access Journals (Sweden)

Mesároš Peter

2015-06-01

Full Text Available Cost management should be seen as an essential function of enterprises which perform their activities in current market environment. One of the main factors affecting the level of achieved profit and favourable market position is cost structure. The company's ability to obtain necessary and reliable information on their own cost, subsequent processing and effective cost management is crucial for achieving success. This study focuses on cost management and the use of modern methods of cost management in construction enterprises. The aim of this paper is to identify approaches to cost management in Slovak construction enterprises, based on own empirical research.

NOS CO-OPS Active Currents Data, 6-Minute

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This dataset has surface Active Currents data from NOAA NOS Center for Operational Oceanographic Products and Services (CO-OPS). WARNING: These raw data have not...

Alternate performance standard project: Interpreting the post-construction test

International Nuclear Information System (INIS)

Williamson, A.D.; McDonough, S.E.

1993-01-01

The paper describes the results of a project commissioned by the State of Florida, in cooperation with the US Environmental Protection Agency, as one portion of the Florida Radon Research Program (FRRP). The purpose of the FRRP is to provide technical support for a statewide Building Standard for Radon-Resistant Construction currently in the rulemaking process. In this case the information provides technical background for a post-construction radon test specified as a performance element of the code which accompanies the prescriptive alternative that does not incorporate active radon reduction systems

Current activities at the MIT Research Reactor

International Nuclear Information System (INIS)

Hu Linwen; Bernard, John A.; Harling, Otto K.; Kohse, Gordon E.; Ames, Michael; Olmez, Ilhan

1998-01-01

The MIT Research Reactor (MITR) is a MW nuclear research reactor that is owned and operated by the Massachusetts Institute of Technology to further its educational and research goals at both the undergraduate and graduate level. The reactor first achieved criticality in 1958. It was largely rebuilt in 1973/1974 by MIT staff and students, and its current license expires in August 1999. The current facility, which is designated as the MITR-H, uses a compact core with finned, aluminum-clad, plate-type fuel that is cooled and moderated by light water and reflected by heavy water. The reactor core can hold twenty-seven fuel elements. However, the normal configuration is twenty-four elements. A maximum of four fuel elements can be replaced with in-core experimental facilities. A unique feature of the MITR-II's design is that fixed absorber plates can be inserted in the upper half of the core. These cause the flux to peak in the lower half which benefits experimenters and also facilitates a fuel strategy that involves inversion of fuel elements midway through their life cycle. The MITR-II currently operates continuously for four weeks followed by shutdown of a few days for maintenance. This paper provides an overview of current activities at the MITR including preparations for re-licensing. The status of an on-going Phase-I clinical trial of boron neutron capture therapy for both glioblastoma multiforme and metastatic melanoma is described as well as the design of a fission converter facility for BNCT. Environmental research using neutron activation analysis is summarized as well as in-pile research focussed on LWR water chemistry and structural materials. (author)

Inward rectifier potassium current IKir promotes intrinsic pacemaker activity of thalamocortical neurons.

Science.gov (United States)

Amarillo, Yimy; Tissone, Angela I; Mato, Germán; Nadal, Marcela S

2018-06-01

Slow repetitive burst firing by hyperpolarized thalamocortical (TC) neurons correlates with global slow rhythms (rectifier potassium current I Kir induces repetitive burst firing at slow and delta frequency bands. We demonstrate this in mouse TC neurons in brain slices by manipulating the Kir maximum conductance with dynamic clamp. We also performed a thorough theoretical analysis that explains how the unique properties of I Kir enable this current to induce slow periodic bursting in TC neurons. We describe a new ionic mechanism based on the voltage- and time-dependent interaction of I Kir and hyperpolarization-activated cationic current I h that endows TC neurons with the ability to oscillate spontaneously at very low frequencies, even below 0.5 Hz. Bifurcation analysis of conductance-based models of increasing complexity demonstrates that I Kir induces bistability of the membrane potential at the same time that it induces sustained oscillations in combination with I h and increases the robustness of low threshold-activated calcium current I T -mediated oscillations. NEW & NOTEWORTHY The strong inwardly rectifying potassium current I Kir of thalamocortical neurons displays a region of negative slope conductance in the current-voltage relationship that generates potassium currents activated by hyperpolarization. Bifurcation analysis shows that I Kir induces bistability of the membrane potential; generates sustained subthreshold oscillations by interacting with the hyperpolarization-activated cationic current I h ; and increases the robustness of oscillations mediated by the low threshold-activated calcium current I T . Upregulation of I Kir in thalamocortical neurons induces repetitive burst firing at slow and delta frequency bands (<4 Hz).

Design, construction and mechanical optimisation process of electrode with radial current flow in the scala tympani.

Science.gov (United States)

Deman, P R; Kaiser, T M; Dirckx, J J; Offeciers, F E; Peeters, S A

2003-09-30

A 48 contact cochlear implant electrode has been constructed for electrical stimulation of the auditory nerve. The stimulating contacts of this electrode are organised in two layers: 31 contacts on the upper surface directed towards the habenula perforata and 17 contacts connected together as one longitudinal contact on the underside. The design of the electrode carrier aims to make radial current flow possible in the cochlea. The mechanical structure of the newly designed electrode was optimised to obtain maximal insertion depth. Electrode insertion tests were performed in a transparent acrylic model of the human cochlea.

The effect of activity history and current activity on static and dynamic postural balance in older adults.

Science.gov (United States)

Bulbulian, R; Hargan, M L

2000-01-01

The purpose of this study was to investigate the effects of former athleticism and current activity status on static and dynamic postural balance in older adults. Fifty-six subjects participated in four study groups including former athletes, currently active (AA; n = 15; 69.1+/-4.4 years.; 77.8+/-9.8 kg), former athletes, currently inactive (AI; n = 12; 66.7 years.; 87.2+/-15.1 kg), controls currently active (CA; n = 14; 68.6 +/- 4.5 years.; 73.9+/-15 kg), and controls currently inactive (CI; n = 15; 72.8+/-4.8 years; 81.1+/-14.8). All subjects were tested for height, weight, flexibility, thigh circumference, and static (sharpened Romberg/unipedal stance), and dynamic (step length and width) balance tests. The sharpened Romberg (eyes open) test showed that AA (60.0+/-0 s) and CA (59.4+/- 0.5 s) balanced significantly longer than AI (41.5+/-7.2 s), and CI (41.8+/-6.1 s) (punipedal (eyes open) test balance scores for AA, CA, AI, and CI were respectively 40.0+/-4.5, 55.1+/- 3.4, 33.0+/-7.1, and 27.5+/-6.1 s, with CA significantly better than CI (ptest results for relative group comparisons were similar. Overall, two-way analysis of variance showed a significant activity main effect for all dependent variables measured (p<0.05). The results indicated that current activity status plays a key role on balance performance in older adults. Furthermore, former athletic activity history provides no protection for the age related onset of postural imbalance.

Cross-cultural and construct validity of the Animated Activity Questionnaire

DEFF Research Database (Denmark)

Peter, Wilfred F; Cw de Vet, Henrika; Boers, Maarten

2017-01-01

OBJECTIVE: The Animated Activity Questionnaire (AAQ) assesses activity limitations in patients with hip/knee osteoarthritis (HKOA), and consisting video animations of which patients choose the animation that best matches their own performance. The AAQ has shown good validity and reliability......, and a Patient Reported Outcome Measure (PROM) and performance-based tests. RESULTS: Data of 1239 patients were available. Compared to Dutch (n=279), none of the 17 items showed DIF in English (n=202), French (n=193), 1 item showed uniform DIF in Spanish (n=99) and Norwegian (n=62), and 2 items showed uniform...... with the cross-cultural validity between these countries. With regard to construct validity, the correlations with PROM (0.74) and performance-based tests (0.36-0.68) were partly as expected (> 0.60). CONCLUSION: The AAQ, an innovative tool to measure activity limitations that can be placed on the continuum...

Oxygen reduction activity of carbon fibers cathode, and application for current generation from the NAD+ and NADH recycling reaction

Directory of Open Access Journals (Sweden)

H. Maeda

2012-03-01

Full Text Available Carbon fibers treated at 700 oC for 10 min were found to have O2 reduction activity when being used as a cathode. The special type of partition combined with both cationic and anionic exchange membranes was applied between anode cell and cathode cell in order to use a highly acidic solution such as 0.5 M H2SO4 as an electrolyte of the cathode cell for increasing the efficiency of O2 reduction activity. The current generation from NAD+ and NADH recycling system combined with D-gluconolactone production from 500 mg of D-glucose was performed by applying only carbon fibers for both anode and cathode. The total current volume obtained was 81.4 mAh during the reaction for 10 h, and the current efficiency was 93%. One gram of carbon fibers was pressed with Nafion paste on a piece of carbon paper(area : 50 mm×50mm with heating to prepare the cathode, and this construct was combined with conventional fuel cell. The power density was 3.6 mW/cm2, and the total power volume was calculated to be 90 mW per 1 g of carbon fibers.

Criticality in Location-Based Management of Construction

DEFF Research Database (Denmark)

Büchmann-Slorup, Rolf

, the current literature does not include a collected description of what constitute critical activities in LBM. Nor have the implications for scheduling and control efforts of these changes in criticality been described. Accordingly, the present thesis establishes a collected criticality principle of LBM......; highlights the implications of this alternative criticality principle to the schedule and control effort on construction projects; and suggests how time buffers should be applied on LBM projects to protect critical activities, compress project’s lead times, optimize flow, and minimize resource consumption....... The thesis offers three main results that contribute to the current LBM literature and close some of the gaps therein. The thesis conceptualizes the criticality principle of LBM by analyzing the relationship between inherent constraints in LBM and the lead times of projects. The collected criticality...

History of body weight and physical activity of elderly women differing in current physical activity

NARCIS (Netherlands)

Voorrips, L E; Meijers, J H; Sol, P; Seidell, J C; van Staveren, W.A.

Development of overweight and physical activity during life was studied retrospectively in a group of physically active and a group of sedentary elderly women. The two groups of elderly women were selected based on a validated physical activity questionnaire. A previous study on their current

Construct validity of a revised Physical Activity Scale and testing by cognitive interviewing

DEFF Research Database (Denmark)

Andersen, Lise G; Groenvold, Mogens; Jørgensen, Torben

2010-01-01

), previously found to overestimate physical activity. RESULTS: Cognitive interviewing revealed few problems in the questions on physical activity in different domains. No problems regarding the structure of the questionnaire were identified. The agreement between PAS 1 and PAS 2 MET-scores was high among...... was evaluated by cognitive interviewing in 16 Danish men and women aged 21-70 years. Construct validity was validated in 342 men and women aged 35-66 years by assessing agreement between 24-h MET-scores obtained from average weekly physical activity measured by PAS 2 and a 24-h Physical Activity Scale (PAS 1...

Construction of natural radiation exposure study network - overview and current status

International Nuclear Information System (INIS)

Tokonami, Shinji

2010-01-01

A new project entitled 'Construction of natural radiation exposure study network' was adopted in the Program of Promotion of International Joint Research under the Special Coordination Funds for Promoting Science and Technology operated by the Ministry of Education, Culture, Sports, Science and Technology of Japan. Eight institutions were involved in this project and the project will continue until March, 2012. The aims of the project are to assess the dose for natural radiation exposures using state-of- the-art measurement techniques in four Asian countries (China, India, Korea and Thailand) and their outcomes will be distributed worldwide. Throughout the project, conventional measurement techniques will be improved and be optimized. More scientific data and results will be obtained as well. In particular, the following advanced technologies for inhalation exposures will be introduced: (1) Discriminative measurements of radon ( 222 Rn) and thoron ( 220 Rn) gases, (2) Evaluation of thoron decay products concentration, (3) Simple but effective particle size distribution measurements. In China, we are conducting a case-control study of radon and lung cancer in Gansu, China. This Gansu area was investigated in the past for the case-control study. New data are being accumulated. In India, we focused on Orissa in order to carry out radiation measurements in this project. In parallel, Kerala is currently involved as the comparative study area. In Korea, we are now measuring radon and thoron in radon/thoron prone areas. These results will give us new information for further understanding of exposure due to radon and thoron. In Thailand, we are carrying out comprehensively radiation measurements in NORM industries. Not only these surveys but also quality assurance of radon measurements are being addressed in Japan. We have managed an international intercomparison exercise of passive radon detectors at NIRS. This study presents an overview of the project and current status

Management and integration of engineering and construction activities: Lessons learned from the AP1000R nuclear power plant China project

International Nuclear Information System (INIS)

McCullough, M. C.; Ebeling-Koning, D.; Evans, M. C.

2012-01-01

The lessons learned during the early phase of design engineering and construction activities for the AP1000 China Project can be applied to any project involving multiple disciplines and multiple organizations. Implementation of a first-of-a-kind design to directly support construction activities utilizing resources assigned to design development and design delivery creates challenges with prioritization of activities, successful closure of issues, and communication between site organizations and the home office. To ensure successful implementation, teams were assigned and developed to directly support construction activities including prioritization of activities, site communication and ensuring closure of site emergent issues. By developing these teams, the organization is better suited to meet the demands of the construction schedule while continuing with design evolution of a standard plant and engineering delivery for multiple projects. For a successful project, proper resource utilization and prioritization are key for overcoming obstacles and ensuring success of the engineering organization. (authors)

Development of inherent technologies for advanced PWR core - A study on the current status and the construction feasibility of critical facilities

Energy Technology Data Exchange (ETDEWEB)

Yang, Won Sik; Yang, Hyun Seok [Chosun University, Kwangju (Korea); Kim, Chang Hyo; Shim, Hyung Jin [Seoul National University, Seoul (Korea)

1999-03-01

The objective of this study is to examine the appropriateness of constructing critical facilities in our country and to decide a course of constructing them if necessary by surveying the status and utilization of foreign facilities and by investigating the demand for domestic facilities. We investigated the status and the utilization of foreign critical facilities through literature survey and personal visitation. In our judgement, critical facilities are necessary for developing the advanced reactors and fuels which are being studied as parts of the Nuclear R and D Program by MOST. Considering the construction cost and the current state of domestic economy, however, it is unjustifiable to build three different types of critical facilities (the light water, the heavy water, and the fast critical facility). It appears to be reasonable to build a light water critical, considering the construction cost, degree of utilization, and other constraints. (author). 89 refs., 134 figs., 64 tabs.

Factors Affecting Competitive Strategies in International Construction Companies

Directory of Open Access Journals (Sweden)

Tuğçe ERCAN

2013-02-01

Full Text Available Due to rising competition in the international construction market, competitive strategies are becoming ever more important. This study aims to identify the level of importance of a variety of competitive strategies in construction companies to create a theoretical framework for competitive strategies in international construction business. In the questionnaire titled: ‘Identifying the Parameters of Strategic Performance Comparison Tool in International Construction Companies’, professionals were asked the level of importance of parameters in acquiring a competitive edge in international markets for construction companies. 82 people who currently work for international construction companies responded the questionnaire. The Relative Importance Index (RII of competitive strategies in construction companies was calculated using the survey results. The construct was redesigned through the Pearson Correlation and principal components analysis (PCA. The results of the PCA denoted that the construct of competitive strategies in construction companies can be explained by three main factors in sync with Porter’s three generic competitive strategy types: F1 Cost Leadership in Construction, F2 Specialization and Focus and F3 Differentiation in Construction and Company Resources. The analysis results show that the competitive strategies related to “Differentiation in Construction and Company Resources” have a greater importance level, while the diversification strategies have a lower importance level. Which means specialization in some type of construction activity and focus on a specific group of customers is more effective than diversification strategies in gaining a competitive advantage in the market.

Algorithm for evaluating the effectiveness of a high-rise development project based on current yield

Science.gov (United States)

Soboleva, Elena

2018-03-01

The article is aimed at the issues of operational evaluation of development project efficiency in high-rise construction under the current economic conditions in Russia. The author touches the following issues: problems of implementing development projects, the influence of the operational evaluation quality of high-rise construction projects on general efficiency, assessing the influence of the project's external environment on the effectiveness of project activities under crisis conditions and the quality of project management. The article proposes the algorithm and the methodological approach to the quality management of the developer project efficiency based on operational evaluation of the current yield efficiency. The methodology for calculating the current efficiency of a development project for high-rise construction has been updated.

Construction of testing facilities and verifying tests of a 22.9 kV/630 A class superconducting fault current limiter

Science.gov (United States)

Yim, S.-W.; Yu, S.-D.; Kim, H.-R.; Kim, M.-J.; Park, C.-R.; Yang, S.-E.; Kim, W.-S.; Hyun, O.-B.; Sim, J.; Park, K.-B.; Oh, I.-S.

2010-11-01

We have constructed and completed the preparation for a long-term operation test of a superconducting fault current limiter (SFCL) in a Korea Electric Power Corporation (KEPCO) test grid. The SFCL with rating of 22.9 kV/630 A, 3-phases, has been connected to the 22.9 kV test grid equipped with reclosers and other protection devices in Gochang Power Testing Center of KEPCO. The main goals of the test are the verification of SFCL performance and protection coordination studies. A line-commutation type SFCL was fabricated and installed for this project, and the superconducting components were cooled by a cryo-cooler to 77 K in the sub-cooled liquid nitrogen pressurized by 3 bar of helium gas. The verification test includes un-manned - long-term operation with and without loads and fault tests. Since the test site is 170 km away from the laboratory, we will adopt the un-manned operation with real-time remote monitoring and controlling using high speed internet. For the fault tests, we will apply fault currents up to around 8 kArms to the SFCL using an artificial fault generator. The fault tests may allow us not only to confirm the current limiting capability of the SFCL, but also to adjust the SFCL - recloser coordination such as resetting over-current relay parameters. This paper describes the construction of the testing facilities and discusses the plans for the verification tests.

Construction of testing facilities and verifying tests of a 22.9 kV/630 A class superconducting fault current limiter

International Nuclear Information System (INIS)

Yim, S.-W.; Yu, S.-D.; Kim, H.-R.; Kim, M.-J.; Park, C.-R.; Yang, S.-E.; Kim, W.-S.; Hyun, O.-B.; Sim, J.; Park, K.-B.; Oh, I.-S.

2010-01-01

We have constructed and completed the preparation for a long-term operation test of a superconducting fault current limiter (SFCL) in a Korea Electric Power Corporation (KEPCO) test grid. The SFCL with rating of 22.9 kV/630 A, 3-phases, has been connected to the 22.9 kV test grid equipped with reclosers and other protection devices in Gochang Power Testing Center of KEPCO. The main goals of the test are the verification of SFCL performance and protection coordination studies. A line-commutation type SFCL was fabricated and installed for this project, and the superconducting components were cooled by a cryo-cooler to 77 K in the sub-cooled liquid nitrogen pressurized by 3 bar of helium gas. The verification test includes un-manned - long-term operation with and without loads and fault tests. Since the test site is 170 km away from the laboratory, we will adopt the un-manned operation with real-time remote monitoring and controlling using high speed internet. For the fault tests, we will apply fault currents up to around 8 kA rms to the SFCL using an artificial fault generator. The fault tests may allow us not only to confirm the current limiting capability of the SFCL, but also to adjust the SFCL - recloser coordination such as resetting over-current relay parameters. This paper describes the construction of the testing facilities and discusses the plans for the verification tests.

Active current control in wind power plants during grid faults

DEFF Research Database (Denmark)

Martinez, Jorge; Kjær, Phillip C.; Rodriguez, Pedro

2010-01-01

Modern wind power plants are required and designed to ride through faults in electrical networks, subject to fault clearing. Wind turbine fault current contribution is required from most countries with a high amount of wind power penetration. In order to comply with such grid code requirements......, wind turbines usually have solutions that enable the turbines to control the generation of reactive power during faults. This paper addresses the importance of using an optimal injection of active current during faults in order to fulfil these grid codes. This is of relevant importance for severe...... faults, causing low voltages at the point of common coupling. As a consequence, a new wind turbine current controller for operation during faults is proposed. It is shown that to achieve the maximum transfer of reactive current at the point of common coupling, a strategy for optimal setting of the active...

Construction fraud

NARCIS (Netherlands)

Graafland, J.J.; Liedekerke, L.; Dubbink, W.; van Liedekerke, L.; van Luijk, H.

2011-01-01

Due to the actions of a whistleblower The Netherlands was confronted with a massive case of construction fraud involving almost the entire construction sector. Price fixing, prior consulting, duplicate accounts, fictitious invoices and active corruption of civil servants were rampant practices. This

Constructing a sustainable power sector in China: current and future emissions of coal-fired power plants from 2010 to 2030

Science.gov (United States)

Tong, D.; Zhang, Q.

2017-12-01

As the largest energy infrastructure in China, power sector consumed more coal than any other sector and threatened air quality and greenhouse gas (GHG) abatement target. In this work, we assessed the evolution of coal-fired power plants in China during 2010-2030 and the evolution of associated emissions for the same period by using a unit-based emission projection model which integrated the historical power plants information, turnover of the future power plant fleet, and the evolution of end-of-pipe control technologies. We found that, driven by the stringent environmental legislation, SO2, NOx, and PM2.5 emissions from China's coal-fired power plants decreased by 49%, 45%, and 24% respectively during 2010-2015, comparing to 14% increase of coal consumption and 15% increase in CO2 emissions. We estimated that under current national energy development planning, coal consumption and CO2 emissions from coal-fired power plants will continue to increase until 2030, in which against the China's Intended Nationally Determined Contributions (INDCs) targets. Early retirement of old and low-efficient power plants will cumulatively reduce 2.2 Pg CO2 emissions from the baseline scenario during 2016-2030, but still could not curb CO2 emissions from the peak before 2030. Owing to the implementation of "near zero" emission control policy, we projected that emissions of air pollutants will significantly decrease during the same period under all scenarios, indicating the decoupling trends of air pollutants and CO2 emissions. Although with limited direct emission reduction benefits, increasing operating hours of power plants could avoid 236 GW of new power plants construction, which could indirectly reduce emissions embodied in the construction activity. Our results identified a more sustainable pathway for China's coal-fired power plants, which could reduce air pollutant emissions, improve the energy efficiency, and slow down the construction of new units. However, continuous

Active power compensator of the current harmonics based on the instantaneous power theory

Directory of Open Access Journals (Sweden)

Marian GAICEANU

2005-12-01

Full Text Available The quality of the electrical current becomes a major concern. The proliferation of the power electronic converters, which are used extensively to control electrical apparatus in industrial and commercial applications (dc and ac variable speed motor drives, induction furnaces, power line conditioners, and industrial power supplies, is at the origin of the AC current distribution network pollution and the reactive power demand. These power electronic converters typically draw non-sinusoidal currents from the utility, causing interference with adjacent sensitive loads and limit the utilization of the available electrical supply. The quality of the electrical current thus becomes a significant concern for the distributors of energy and their customers. Recent progress as regards technology of the power electronics brings a capacity of compensation and correction of the harmonic distortion generated by the nonlinear loads. In this paper a parallel active filter prototype capable of reducing the total harmonic distortion in the supply for most current source or adjustable speed drive type loads is presented. A 33 kVA active power filter was developed for harmonic and reactive power compensation based on the instantaneous power theory. The active filter configuration requires the measurement of both the load and filter currents. Experimental results from a prototype active power filter confirm the suitability of the proposed approach. The actual 33kVA prototype converter has been built and tested in the SIEI S.p.A. (Italy laboratory under the Marie Curie Post Doctoral research. The active power compensator is controlled by a high performance DSP platform, resulting in the following active filter features: source current reduction up to the 25th harmonic, 10% THD achievable for current source type loads, efficiency above 97%, does not cause resonance with other loads, operation in the presence of unbalanced loads, reactive power and harmonics

Materials challenges for ITER - Current status and future activities

Energy Technology Data Exchange (ETDEWEB)

Barabash, V. [ITER International Team, Boltsmannstrasse 2, 85748 Garching (Germany)]. E-mail: valdimir.barabash@iter.org; Peacock, A. [EFDA Close Support Unit, 85748 Garching (Germany); Fabritsiev, S. [D.V. Efremov Scientific Research Institute, 196641 St. Petersburg (Russian Federation); Kalinin, G. [ENES, P.O. Box 788, 101000 Moscow (Russian Federation); Zinkle, S. [Metals and Ceramics Division, ORNL, P.O. Box 2008, Oak Ridge, TN 37831-6138 (United States); Rowcliffe, A. [Metals and Ceramics Division, ORNL, P.O. Box 2008, Oak Ridge, TN 37831-6138 (United States); Rensman, J.-W. [NRG, P.O. Box 25, 1755 ZG Petten (Netherlands); Tavassoli, A.A. [Commissariat a l' Energie Atomique, CEA/Saclay, 91191 Gif sur Yvette cedex (France); Marmy, P. [CRPP, EPFL, Association EURATOM-Confederation Suisse, 5232, Villigen PSI (Switzerland); Karditsas, P.J. [EURATOM/UKAEA Fusion Association, Abingdon, Oxon OX14 3DB (United Kingdom); Gillemot, F. [AEKI Atomic Research Institute, 1121 Budapest, (Hungary); Akiba, M. [JAEA, Naka-machi, Naka-gun, Ibaraki-ken 311-0193 (Japan)

2007-08-01

ITER will be the first experimental fusion facility, which brings together the key physical, material and technological issues related to development of fusion reactors. The design of ITER is complete and the construction will start soon. This paper discusses the main directions of the project oriented materials activity and main challenges related to selection of materials for the ITER components. For each application in ITER the main materials issues were identified and these issues were addressed in the dedicated ITER R and D program. The justification of materials performance was fully documented, which allows traceability and reliability of design data. Several examples are given to illustrate the main achievements and recommendations from the recently updated ITER Materials Properties Handbook. The main ongoing and future materials activities are described.

Electro-active sensor, method for constructing the same; apparatus and circuitry for detection of electro-active species

Science.gov (United States)

Buehler, Martin (Inventor)

2009-01-01

An electro-active sensor includes a nonconductive platform with a first electrode set attached with a first side of a nonconductive platform. The first electrode set serves as an electrochemical cell that may be utilized to detect electro-active species in solution. A plurality of electrode sets and a variety of additional electrochemical cells and sensors may be attached with the nonconductive platform. The present invention also includes a method for constructing the aforementioned electro-active sensor. Additionally, an apparatus for detection and observation is disclosed, where the apparatus includes a sealable chamber for insertion of a portion of an electro-active sensor. The apparatus allows for monitoring and detection activities. Allowing for control of attached cells and sensors, a dual-mode circuitry is also disclosed. The dual-mode circuitry includes a switch, allowing the circuitry to be switched from a potentiostat to a galvanostat mode.

The effect of a self-constructed material on children’s physical activity during recess

Directory of Open Access Journals (Sweden)

Antonio Méndez-Giménez

Full Text Available ABSTRACT OBJECTIVE To analyze whether an intervention supported by free play with a self-constructed material increases the level of physical activity of students during recess. METHODS The participants were 166 children of third to sixth grade, between nine and 12 years old (average = 10.64; SS = 1.13. An experimental project was conducted with pre-test and post-test measurement, and a control group. Experimental group participants built cardboard paddles (third and fourth and flying rings (fifth and sixth, a material they used freely for one week during recess. ActiGraph-GT3X accelerometers were used to measure physical activity. An ANOVA of repeated measures was used to find differences between groups and genders. RESULTS Significant intervention effects were found in the analyzed variables: sedentary activity (F = 38.19; p < 0.01, light (F = 76.56; p < 0.01, moderate (F = 27.44; p < 0.01, vigorous (F = 61.55; p < 0.01, and moderate and vigorous (F = 68.76; p < 0.01. Significant gender differences were shown (time × group × gender for moderate (F = 6.58; p < 0.05 and vigorous (F = 5.51; p < 0.05 activity. CONCLUSIONS The self-constructed material is effective to increase the physical activity levels of children during recess; it decreases sedentary activity and light physical activity and increases the time devoted to moderate physical activity and vigorous physical activity, both in boys and in girls. The boys had an increase in vigorous physical activity and the girls in moderate physical activity. Due to its low cost, this strategy is recommended for administrators and teachers to increase the physical activity of children during recess.

Plasma-current structures of plasma focus during the current disruption

International Nuclear Information System (INIS)

Krokhin, O.N.; Kalachev, N.V.; Malafeev, Yu.S.; Nikulin, V.Ya; Polukhin, S.N.; Tsybenko, S.P.

2000-01-01

The results are presented of an investigation of the plasma structures arising during the current disruption in the Dense Plasma Focus (DPF). The study was performed using the laser-shadow and interferometry methods together with measurements of current and X-ray radiation. An analysis of the experimental results shows that for the construction of a multi mega-amperes current disruption device, the Filippov type of DPF (in comparison with the Mather type) is to be preferred since the processes occurring in the X-ray regime are much faster than in the pinch regime, and this type of plasma focus is geometrically more suitable for the assembly of such a current disrupter.This disrupter is now under construction, based on the 'Tulip' DPF installation

Active current sheets near the earth's bow shock

International Nuclear Information System (INIS)

Schwartz, S.J.; Kessel, R.L.; Brown, C.C.; Woolliscroft, L.J.C.; Dunlop, M.W.; Farrugia, C.J.; Hall, D.S.

1988-01-01

The authors present here an investigation of active current sheets observed by the AMPTE UK spacecraft near the Earth's bow shock, concentrating on their macroscopic features and geometry. Events selected primarily by flow directions which deviate substantially from the Sun-Earth line show similar characteristics, including their association with an underlying macroscopic current sheet and a hot central region whose flow direction is organized, at least in part, by location relative to the inferred initial intersection point between the current sheet and the bow shock. This region is flanked by edges which, according to a Rankine-Hugoniot analysis, are often fast shocks whose orientation is consistent with that expected if a bulge on the bow shock convected past the spacecraft. They have found the magnetosheath manifestations of these events which they study in detail. They suggest that these events are the direct result of the disruption and reformation of the bow shock by the passage of an interplanetary current sheet, most probably a tangential discontinuity

Achieving transparency in carbon labelling for construction materials – Lessons from current assessment standards and carbon labels

International Nuclear Information System (INIS)

Wu, Peng; Low, Sui Pheng; Xia, Bo; Zuo, Jian

2014-01-01

Highlights: • The evolution of international GHG standards is reviewed. • The evolution of international carbon labelling schemes is reviewed. • The transparency requirements in carbon labelling schemes are revealed. • Key recommendations are provided to improve transparency in carbon labelling. - Abstract: The construction industry is one of the largest sources of carbon emissions. Manufacturing of raw materials, such as cement, steel and aluminium, is energy intensive and has considerable impact on carbon emissions level. Due to the rising recognition of global climate change, the industry is under pressure to reduce carbon emissions. Carbon labelling schemes are therefore developed as meaningful yardsticks to measure and compare carbon emissions. Carbon labelling schemes can help switch consumer-purchasing habits to low-carbon alternatives. However, such switch is dependent on a transparent scheme. The principle of transparency is highlighted in all international greenhouse gas (GHG) standards, including the newly published ISO 14067: Carbon footprint of products – requirements and guidelines for quantification and communication. However, there are few studies which systematically investigate the transparency requirements in carbon labelling schemes. A comparison of five established carbon labelling schemes, namely the Singapore Green Labelling Scheme, the CarbonFree (the U.S.), the CO 2 Measured Label and the Reducing CO 2 Label (UK), the CarbonCounted (Canada), and the Hong Kong Carbon Labelling Scheme is therefore conducted to identify and investigate the transparency requirements. The results suggest that the design of current carbon labels have transparency issues relating but not limited to the use of a single sign to represent the comprehensiveness of the carbon footprint. These transparency issues are partially caused by the flexibility given to select system boundary in the life cycle assessment (LCA) methodology to measure GHG emissions. The

Construction of the K=8 fractional superconformal algebras

International Nuclear Information System (INIS)

Argyres, P.C.; Grochocinski, J.M.; Tye, S.H.H.

1993-01-01

We construct the K=8 fractional superconformal algebras. There are two such extended Virasoro algebras, one of which was constructed earlier, involving a fractional spin (equivalently, conformal dimension) 6/5 current. The new algebra involves two additional fractional spin currents with spin 13/5. Both algebras are non-local and satisfy non-abelian braiding relations. The construction of the algebras uses the ismorphism between the Z 8 parafermion theory and the tensor product of two tricritical Ising models. For the special value of the central charge c=52/55, corresponding to the eighth member of the unitary minimal series, the 13/5 currents of the new algebra decouple, while two spin 23/5 currents (level-2 current algebra descendants of the 13/5 currents) emerge. In addition, it is shown that the K=8 algebra involving the spin 13/5 currents at central charge c=12/5 is the appropriate algebra for the construction of the K=8 (four-dimensional) fractional superstring. (orig.)

USAID Construction Assessment

Data.gov (United States)

US Agency for International Development — The USAID construction assessment is a survey of the character, scope, value and management of construction activities supported by USAID during the period from June...

Management and integration of engineering and construction activities: Lessons learned from the AP1000{sup R} nuclear power plant China project

Energy Technology Data Exchange (ETDEWEB)

McCullough, M. C.; Ebeling-Koning, D.; Evans, M. C. [Westinghouse Electric Company LLC, 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States)

2012-07-01

The lessons learned during the early phase of design engineering and construction activities for the AP1000 China Project can be applied to any project involving multiple disciplines and multiple organizations. Implementation of a first-of-a-kind design to directly support construction activities utilizing resources assigned to design development and design delivery creates challenges with prioritization of activities, successful closure of issues, and communication between site organizations and the home office. To ensure successful implementation, teams were assigned and developed to directly support construction activities including prioritization of activities, site communication and ensuring closure of site emergent issues. By developing these teams, the organization is better suited to meet the demands of the construction schedule while continuing with design evolution of a standard plant and engineering delivery for multiple projects. For a successful project, proper resource utilization and prioritization are key for overcoming obstacles and ensuring success of the engineering organization. (authors)

Industrialization for sustainable construction?

NARCIS (Netherlands)

Egmond - de Wilde De Ligny, van E.L.C.; Barrett, P; Amaratunga, D.; Haigh, R; Keraminiyage, K.; Pathirage, C

2010-01-01

Sustainable construction (SuCo), which genesis dates in the early 1990’s, advocates the creation and operation of a quality and healthy built environment based on resource efficiency, life cycle economics and ecological principles. (Kibert, 2003). Currently the Construction Industry does not meet

Analysis by nuclear reactions and activations. A current bibliography

International Nuclear Information System (INIS)

Bujdoso, E.

2001-01-01

A current bibliography based on INIS Atomindex with 78 references on Analysis by nuclear reactions and activations has been prepared for year 1998. References are arranged by first authors' name. (N.T.)

Control algorithms based on the active and non-active currents for a UPQC without series transformers

OpenAIRE

Correa Monteiro, Luis Fernando; Aredes, Mauricio; Pinto, J. G.; Exposto, Bruno; Afonso, João L.

2016-01-01

This study presents control algorithms for a new unified power quality conditioner (UPQC) without the series transformers that are frequently used to make the insertion of the series converter of the UPQC between the power supply and the load. The behaviour of the proposed UPQC is evaluated in presence of voltage imbalances, as well as under non-sinusoidal voltage-and current conditions. The presented algorithms derive from the concepts involving the active and non-active currents, together w...

Employment and winter construction

DEFF Research Database (Denmark)

Hansen, Ernst Jan de Place; Larsen, Jacob Norvig

2011-01-01

Reduced seasonal building activity in the construction sector is often assumed to be related to hard winter conditions for building activities and poor working conditions for construction workers, resulting in higher costs and poor quality of building products, particularly in the northern hemisp...... of contracts for workers is more likely to explain differences in seasonal activity than climatic or technological factors....

Planning Costs in Certain Stage of the Life Cycle of Investment Activity of Construction Organization

OpenAIRE

Iakymchuk Iryna M.

2017-01-01

The article discusses the issues related to planning costs in certain stages of the life-cycle of investment activity of construction organization. It has been specified that cost management based on the life-cycle model of the investment project, which is being implemented by a construction organization, allows for a consistent improvement in the efficiency of the innovation process on the basis of a clear planning, as well as cost forecasting. This approach allows for the long-term effectiv...

Correlation of Safety Culture Attributes in Construction Industry

Directory of Open Access Journals (Sweden)

Pervez Shaikh

2013-07-01

Full Text Available The importance of construction industry can not be overemphasized because it is one of the biggest contributors toward economic activities of a country. It employs a countable number of workforce and it is prone to accidents, incidents, hazards and disasters, therefore, the safety factor is equally important. The current research explores safety culture in the perspective of its important attributes. The EFQM (European Foundation for Quality Management is taken as the bases for finding the ways and means of safety culture improvement of the construction industry. The correlation of pattern of responses is found for every attribute of the safety culture and the interrelationships and strengths are worked out to detect the involvement of the attribute.

Study on construction technology for repository

International Nuclear Information System (INIS)

Tanai, Kenji; Iwasa, Kengo; Hasegawa, Hiroshi; Miura, Kazuhiko; Okutsu, Kazuo; Kobayashi, Masaaki

1999-11-01

For the construction of underground facilities comprising access tunnels, connecting tunnels, main tunnels and disposal tunnels, a large number of tunnels will be excavated in deep rock formations. These excavations will extend hundreds kilometers in total length. Therefore, special attention must be paid, to transporting large volume of debris, ventilation, emergency escape routes in case of accident, and other factors. In addition, special attention must also paid to potential accidents which might in underground excavations, including unstable facing phenomena (such as collapse and swelling of facing at weak layer sections), spring water flow resulting collapse of rock, gas eruption, and rock burst. While considering these factors to be emphasized during the construction of geological disposal facilities, the investigation reviewed the existing working methods on individual construction technologies of access tunnels, main tunnels, connecting tunnels, disposal tunnels, and disposal pit, based on the recognition that the present state deals with a wide range of geological environments, and conducted investigation about the construction methods for each tunnel on the basis current technologies, and described the outline of these methods. Furthermore, for the items to be particularly emphasized on site characterization and siting data such as ground pressure and spring water, the investigation reviewed the current countermeasure works, and made survey on the phenomena appeared during actual tunnel construction works and their countermeasures, and carried out a study on effectiveness of these countermeasures. This constructing of disposal site in deep geological formations is basically possible by applying, or confirming, current excavation technologies for tunnels and underground facilities. A systematic construction system combines separate technologies relating to construction, (excavation technology, tunnel support work method, etc.). Such systems can be

Approach to the use of indicators for the assessment of the environmental level of construction products

OpenAIRE

Montes Delgado, María Victoria; Monterde Pereira, Daniel; Villoria Saez, Paola

2011-01-01

The European construction industry is supposed to consume the 40% of the natural European resources and to generate the 40% of the European solid waste. Conscious of the great damage being suffered by the environment because of construction activity, this work tries to provide the building actors with a new tool to improve the current situation. The tool proposed is a model for the comprehensive evaluation of construction products by determining their environmental level. In this researc...

SUBSURFACE CONSTRUCTION AND DEVELOPMENT ANALYSIS

International Nuclear Information System (INIS)

N.E. Kramer

1998-01-01

The purpose of this analysis is to identify appropriate construction methods and develop a feasible approach for construction and development of the repository subsurface facilities. The objective of this analysis is to support development of the subsurface repository layout for License Application (LA) design. The scope of the analysis for construction and development of the subsurface Repository facilities covers: (1) Excavation methods, including application of knowledge gained from construction of the Exploratory Studies Facility (ESF). (2) Muck removal from excavation headings to the surface. This task will examine ways of preventing interference with other subsurface construction activities. (3) The logistics and equipment for the construction and development rail haulage systems. (4) Impact of ground support installation on excavation and other construction activities. (5) Examination of how drift mapping will be accomplished. (6) Men and materials handling. (7) Installation and removal of construction utilities and ventilation systems. (8) Equipping and finishing of the emplacement drift mains and access ramps to fulfill waste emplacement operational needs. (9) Emplacement drift and access mains and ramps commissioning prior to handover for emplacement operations. (10) Examination of ways to structure the contracts for construction of the repository. (11) Discussion of different construction schemes and how to minimize the schedule risks implicit in those schemes. (12) Surface facilities needed for subsurface construction activities

Evaluation of recycled concrete aggregates for their suitability in construction activities: An experimental study.

Science.gov (United States)

Puthussery, Joseph V; Kumar, Rakesh; Garg, Anurag

2017-02-01

Construction and demolition waste disposal is a major challenge in developing nations due to its ever increasing quantities. In this study, the recycling potential of waste concrete as aggregates in construction activities was studied. The metal leaching from the recycled concrete aggregates (RCA) collected from the demolition site of a 50year old building, was evaluated by performing three different leaching tests (compliance, availability and Toxic Characteristic Leaching Procedure). The metal leaching was found mostly within the permissible limit except for Hg. Several tests were performed to determine the physical and mechanical properties of the fine and coarse aggregates produced from recycled concrete. The properties of recycled aggregates were found to be satisfactory for their utilization in road construction activities. The suitability of using recycled fine and coarse aggregates with Portland pozzolanic cement to make a sustainable and environmental friendly concrete mix design was also analyzed. No significant difference was observed in the compressive strength of various concrete mixes prepared by natural and recycled aggregates. However, only the tensile strength of the mix prepared with 25% recycled fine aggregates was comparable to that of the control concrete. For other mixes, the tensile strength of the concrete was found to drop significantly. In summary, RCA should be considered seriously as a building material for road construction, mass concrete works, lightly reinforced sections, etc. The present work will be useful for the waste managers and policy makers particularly in developing nations where proper guidelines are still lacking. Copyright © 2016 Elsevier Ltd. All rights reserved.

5-HT modulation of hyperpolarization-activated inward current and calcium- dependent outward current in a crustacean motor neuron

DEFF Research Database (Denmark)

Kiehn, O.; Harris-Warrick, R. M.

1992-01-01

1. Serotonergic modulation of a hyperpolarization-activated inward current, I(h), and a calcium-dependent outward current, I(o(Ca)), was examined in the dorsal gastric (DG) motor neuron, with the use of intracellular recording techniques in an isolated preparation of the crab stomatogastric....... The time course of activation of I(h) was well fitted by a single exponential function and strongly voltage dependent. 5-HT increased the rate of activation of I(h). 5- HT also slowed the rate of deactivation of the I(h) tail on repolarization to -50 mV. 6. The activation curve for the conductance (G...... reduced or eliminated the 5-HT response in the depolarizing range, suggesting that 5-HT specifically reduces I(o(Ca)). 11. These results demonstrate that 5-HT has dual effects on the DG motor neuron, in the crab stomatogastric ganglion. We suggest that changes in the two conductances are responsible...

Light and sporadic physical activity overlooked by current guidelines makes older women more active than older men.

Science.gov (United States)

Amagasa, Shiho; Fukushima, Noritoshi; Kikuchi, Hiroyuki; Takamiya, Tomoko; Oka, Koichiro; Inoue, Shigeru

2017-05-02

Men are generally believed to be more physically active than women when evaluated using current physical activity (PA) guidelines, which count only moderate-to-vigorous physical activity (MVPA) in bouts lasting at least 10 min. However, it remains unclear men are truly more physically active provided that all-intensity PA are evaluated. This population based cross-sectional study aimed to examine gender differences in patterns of objectively-assessed PA in older adults. One thousand two hundred ten community-dwelling Japanese older adults who were originally randomly selected from residential registry of three municipalities were asked to respond a questionnaire and wear an accelerometer (HJA-350IT, Omron Healthcare). The prevalence of achieving current PA guidelines, ≥150 min/week MVPA in bouts lasting at least 10 min, was calculated. Gender differences in volume of each-intensity activity (METs-hour) were assessed by analysis of covariance after adjustment for age and wear time. Data from 450 (255 men, mean 74 years) participants who had valid accelerometer data were analyzed. Women were less likely to meet the guidelines (men: 31.0, women: 21.5%; p women accumulated more light-intensity PA (LPA) and short-bout (1-9 min) MVPA, and thus established higher total volume of PA (men: 22.0 METs-hour/day, women: 23.9 METs-hour/day) (p women were less active when evaluated against current PA guidelines, but more active by total PA. Considering accumulated evidence on health benefits of LPA and short-bout MVPA, our findings highlight the potential for the limitation of assessing PA using current PA guidelines.

Construction and assessment of hierarchical edge elements for three-dimensional computations of eddy currents

Energy Technology Data Exchange (ETDEWEB)

Midtgaard, Ole-Morten

1997-12-31

This thesis considers the feasibility of doing calculations to optimize electrical machines without the need to build expensive prototypes. It deals with the construction and assessment of new, hierarchical, hexahedral edge elements for three-dimensional computations of eddy currents with the electric vector potential formulation. The new elements, five in all, gave up to second-order approximations for both the magnetic field and the current density. Theoretical arguments showed these elements to be more economical for a given polynomial order of the approximated fields than the serendipity family of nodal elements. Further it was pointed out how the support of a source field computed by using edge elements could be made very small provided that a proper spanning tree was used in the edge element mesh. This was exploited for the voltage forcing technique, where source fields were used as basis functions, with unknown total currents in voltage forced conductors as degrees of freedom. The practical assessment of the edge elements proved the accuracy to improve with increasing polynomial order, both for local and global quantities. The most economical element was, however, one giving only complete first-order approximations for both fields. Further, the edge elements turned out to be better than the nodal elements also in practice. For the voltage forcing technique, source field basis functions which had small support, resulted in large reduction of the CPU-time for solving the main equation system, compared to source fields which had large support. The new elements can be used in a p-type adaptive scheme, and they should also be applicable for other tangentially continuous field problems. 67 refs., 34 figs., 10 tabs.

Design and implementation of predictive filtering system for current reference generation of active power filter

Energy Technology Data Exchange (ETDEWEB)

Kilic, Tomislav; Milun, Stanko; Petrovic, Goran [FESB University of Split, Faculty of Electrical Engineering, Machine Engineering and Naval Architecture, R. Boskovica bb, 21000, Split (Croatia)

2007-02-15

The shunt active power filters are used to attenuate the harmonic currents in power systems by injecting equal but opposite compensating currents. Successful control of the active filters requires an accurate current reference. In this paper the current reference determination based on predictive filtering structure is presented. Current reference was obtained by taking the difference of load current and its fundamental harmonic. For fundamental harmonic determination with no time delay a combination of digital predictive filter and low pass filter is used. The proposed method was implemented on a laboratory prototype of a three-phase active power filter. The algorithm for current reference determination was adapted and implemented on DSP controller. Simulation and experimental results show that the active power filter with implemented predictive filtering structure gives satisfactory performance in power system harmonic attenuation. (author)

Issues confronting women participation in the construction industry

OpenAIRE

Aulin, Radhlinah; Jingmond, Monika

2011-01-01

This paper raises the issues confronting the minority cohort’s participation in the construction industry. Women in construction are seen as the wrong gender to be around for the construction occupations require not only manual dexterity but physical strength. Currently, the industry is employing less than 10% of the female in the workforce with even lower participation in crafts and trade. This paper discussed about the current women participation in construction focusing on the European Uni...

New digital reference current generation for shunt active power filter under distorted voltage conditions

Energy Technology Data Exchange (ETDEWEB)

Abdusalam, Mohamed; Karimi, Shahram; Saadate, Shahrokh [Groupe de Recherche en Electrotechnique et Electronique de Nancy (GREEN), CNRS UMR 7037 (France); Poure, Philippe [Laboratoire d' Instrumentation Electronique de Nancy (LIEN), EA 3440, Universite Henri Poincare - Nancy Universite, B.P. 239, 54506 Vandoeuvre les Nancy Cedex (France)

2009-05-15

In this paper, a new reference current computation method suitable for shunt active power filter control under distorted voltage conditions is proposed. The active power filter control is based on the use of self-tuning filters (STF) for the reference current generation and on a modulated hysteresis current controller. This active filter is intended for harmonic compensation of a diode rectifier feeding a RL load under distorted voltage conditions. The study of the active filter control is divided in two parts. The first one deals with the harmonic isolator which generates the harmonic reference currents and is experimentally implemented in a DS1104 card of a DSPACE prototyping system. The second part focuses on the generation of the switching pattern of the inverter by using a modulated hysteresis current controller, implemented in an analogue card. The use of STF instead of classical extraction filters allows extracting directly the voltage and current fundamental components in the {alpha}-{beta} axis without phase locked loop (PLL). The performances are good even under distorted voltage conditions. First, the effectiveness of the new proposed method is mathematically studied and verified by computer simulation. Then, experimental results are presented using a DSPACE system associated with the analogue current controller for a real shunt active power filter. (author)

Agency and the construction of joint activity

DEFF Research Database (Denmark)

Krummheuer, Antonia Lina

features of both home and therapeutic settings. The center is furthermore constructed as a LivingLab to support technological innovation. The pedagogical principle of the center is social inclusion, which is understood as a process to enhance the residents’ opportunities to be part of social situations....... The projects aim to describe and analyze how participants construct social inclusion (or exclusion) in their everyday practices. How do residents show agency and initiative? And how is agency and initiative ascribed to them by others? Which communicative patterns are used to establish mutual understanding...

To the problem of ensuring stability of activities of construction companies engaged in high-rise building construction

Science.gov (United States)

Ivanov, Nikolay; Safe Aldeen, Ahmed

2018-03-01

Recently, more and more attention in scientific literature has been drawn to improving the sustainability of organization. The growth in the volume of high-rise construction in Russia makes the task of assessing and ensuring the sustainability of organizations and enterprises leading this type of construction very relevant. The article considers the approach to assessing the sustainability of the organization's activities in the context of functioning of quality management system (QMS). It puts forward the hypothesis that assessment of sustainability of an organization that has a real and efficient functioning quality management system can be based on the results of assessing the effectiveness of the QMS. The article describes in sufficient detail the sequence of actions to form a list of criteria for assessing the effectiveness of the QMS and sustainability of the organization, and to evaluate both characteristics on the basis of these criteria. For a clear interpretation of the results obtained, the authors use so-called petal diagrams. It suggests an original approach to their creation and analysis. Based on the results of the study, the authors conclude that in order to assess the sustainability of enterprises and organizations analysis of the dynamics of changes in the basic sustainability factors is mandatory.

Construction industry in developing countries

Energy Technology Data Exchange (ETDEWEB)

Moavenzadeh, F

1978-01-01

This paper provides a review of the construction capability available in the developing countries to meet the demand for shelter. It discusses the role of construction in the process of development and its importance to economic growth. It considers the issue facing the growth of a viable indigenous construction industry in the developing world within the context of the activities involved in the creation of constructed facilities--planning, design, contruction and maintenance; it also examines the environment within which the industry has developed. For each construction activity the paper reviews available capabilities, the various resources needed for the development of an indigenous industry, and some possible means of accommodating these needs.

Inspection activities of the Mexican regulatory body during the construction stage of the first unit of Laguna Verde Nuclear Power Plant

International Nuclear Information System (INIS)

Salgado Gonzalez, Julio Ricardo

1996-01-01

The paper addresses the regulatory framework established for the design, construction and operation of the NPP. The regulatory bases of the inspection program are mentioned.A summary of the inspection and reviewing activities carried out by the former Nuclear Safety Management Construction area during the construction stage, taking the year 1977 as the beginning of regular inspection activities for this construction stage, and up to the year 1987, when this one is considered as practically completed, and a stage of pre-operational tests has been started. Finally, the main inspection areas are described, and a summary is given of the classification of deficiencies detected during the inspections

Construct validity of the physical activity questionnaire for adolescents (paq-a): maximal oxygen uptake

OpenAIRE

Benítez-Porres, Javier; Dorado-Guzmán, Manuel; Barrera-Expósito, Jesús; Correas-Gómez, Lorena; Alvero-Cruz, Jose Ramon; Carnero, Elvis A.

2015-01-01

Introduction: The Physical Activity Questionnaire for adolescents (PAQ-A) is a cost-effective tool to assess physical activity (PA) patterns during adolescence and it has been widely used in research and field settings. Convergent validity of PAQ-A has been confirmed in several countries (Bervoets et al., 2014; Janz, Lutuchy, Wenthe, & Levy, 2008; Martinez-Gomez et al., 2009). However, the construct validity has often been overlooked. Therefore, the aim of this study was to analyze the constr...

GRS current activities in East-European countries overview

International Nuclear Information System (INIS)

Teske, H.; Janke, R.

2001-01-01

This report presents the following items: agreement between the Federal Government and Utility Companies about the future utilization of the existing nuclear power plants in Germany, June 2001; GRS current activities in the Eastern European countries; science-technical co-operation with Russia; assessment of safety significance of the events for German NPP; Leningrad in-depth safety assessment, co-operation SEC NRS and GRS

Airway disease in highway and tunnel construction workers exposed to silica.

Science.gov (United States)

Oliver, L Christine; Miracle-McMahill, Heidi

2006-12-01

Construction workers employed in a unique type of tunnel construction known as tunnel jacking were exposed over an 18-month period to respirable crystalline silica at concentrations that exceeded the OSHA permissible exposure limit. The present study examines workplace exposures and occurrence of airway disease in these workers. Medical and occupational histories and chest radiographs were obtained on 343 active construction workers who had worked on the site during the period in question. Chest radiographs were interpreted according to the ILO-1980 system of classification. Standardized questions were used to develop an algorithm to define symptoms consistent with asthma (SCA) and to determine these respiratory outcomes: chronic bronchitis, shortness of breath (SOB), and physician-diagnosed asthma (current vs. not current). Relationships with each of three work activities were examined: slurry wall breakthrough (SWB), chipping caisson overpour, and tunneling/mining. Participants included laborers, carpenters, tunnel workers, ironworkers, operating engineers, and electricians. No cases of silicosis were found on chest X-ray. Overall prevalence of chronic bronchitis, SCA, SOB, and physician-diagnosed asthma was 10.7%, 25%, 29%, and 6.6%, respectively. Odds ratios (OR) for carpenters compared to laborers were significantly elevated for chronic bronchitis, SCA, and SOB. SWB was associated with chronic bronchitis and SCA (OR 4.93, 95% CI = 1.01, 24.17; OR 3.32, 95% CI = 1.25, 8.84, respectively). The interaction between SWB, SCA, and trade was significant for carpenters (OR 6.87, 95% CI = 1.66, 28.39). Inverse trends were observed for months on the site and chronic bronchitis, SCA, and SOB (P = 0.0374, 0.0006, and 0.0307, respectively). Tunnel construction workers exposed to respirable crystalline silica and cement dust are at increased risk for airway disease. Extent of risk varies by trade and work activity. Our data indicate the importance of bystander exposures and

Ready-to-Use Tissue Construct for Military Bone and Cartilage Trauma

Science.gov (United States)

2012-10-01

physiologic hyaline cartilage - osseous transition in massive osteochondral defects in large animals. We will conduct functional outcome analysis, X...10-1-0933 TITLE: Ready-to-Use Tissue Construct for Military Bone and Cartilage Trauma PRINCIPAL INVESTIGATOR: Francis Y. Lee... Cartilage Trauma” addresses the current limitations in treating complex, high-energy musculoskeletal wounds incurred in active combat. High-energy

Construction and analysis of a modular model of caspase activation in apoptosis

Directory of Open Access Journals (Sweden)

Ho Kenneth L

2008-12-01

Full Text Available Abstract Background A key physiological mechanism employed by multicellular organisms is apoptosis, or programmed cell death. Apoptosis is triggered by the activation of caspases in response to both extracellular (extrinsic and intracellular (intrinsic signals. The extrinsic and intrinsic pathways are characterized by the formation of the death-inducing signaling complex (DISC and the apoptosome, respectively; both the DISC and the apoptosome are oligomers with complex formation dynamics. Additionally, the extrinsic and intrinsic pathways are coupled through the mitochondrial apoptosis-induced channel via the Bcl-2 family of proteins. Results A model of caspase activation is constructed and analyzed. The apoptosis signaling network is simplified through modularization methodologies and equilibrium abstractions for three functional modules. The mathematical model is composed of a system of ordinary differential equations which is numerically solved. Multiple linear regression analysis investigates the role of each module and reduced models are constructed to identify key contributions of the extrinsic and intrinsic pathways in triggering apoptosis for different cell lines. Conclusion Through linear regression techniques, we identified the feedbacks, dissociation of complexes, and negative regulators as the key components in apoptosis. The analysis and reduced models for our model formulation reveal that the chosen cell lines predominately exhibit strong extrinsic caspase, typical of type I cell, behavior. Furthermore, under the simplified model framework, the selected cells lines exhibit different modes by which caspase activation may occur. Finally the proposed modularized model of apoptosis may generalize behavior for additional cells and tissues, specifically identifying and predicting components responsible for the transition from type I to type II cell behavior.

Construction and expression of a recombinant antibody-targeted plasminogen activator

International Nuclear Information System (INIS)

Schnee, J.M.; Runge, M.S.; Matsueda, G.A.; Hudson, N.W.; Seidman, J.G.; Haber, E.; Quertermous, T.

1987-01-01

Covalent linkage of tissue-type plasminogen activator (t-PA) to a monoclonal antibody specific for the fibrin β chain (anti-fibrin 59D8) results in a thrombolytic agent that is more specific and more potent that t-PA alone. To provide a ready source of this hybrid molecule and to allow tailoring of the active moieties for optimal activity, the authors have engineered a recombinant version of the 59D8-t-PA conjugate. The rearranged 59D8 heavy chain gene was cloned and combined in the expression vector pSV2gpt with sequence coding for a portion of the γ2b constant region and the catalytic β chain of t-PA. This construct was transfected into heavy chain loss variant cells derived form the 59D8 hybridoma. Recombinant protein was purified by affinity chromatography and analyzed with electrophoretic transfer blots and radioimmunoassay. These revealed a 65-kDa heavy chain-t-PA fusion protein that is secreted in association with the 59D8 light chain in the form of a 170-kDa disulfide-linked dimer. Chromogenic substrate assays showed the fusion protein to have 70% of the peptidolytic activity of native t-PA and to activate plasminogen as efficiently as t-PA. IN a competitive binding assay, reconstituted antibody was shown to have a binding profile similar to that of native 59D8. Thus, by recombinant techniques, they have produced a hybrid protein capable of high affinity fibrin binding and plasminogen activation

Construct validity and inter-rater reliability of the Dutch activity measure for post-acute care "6-clicks" basic mobility form to assess the mobility of hospitalized patients.

Science.gov (United States)

Geelen, Sven Jacobus Gertruda; Valkenet, Karin; Veenhof, Cindy

2018-05-12

To evaluate the construct validity and the inter-rater reliability of the Dutch Activity Measure for Post-Acute Care "6-clicks" Basic Mobility short form measuring the patient's mobility in Dutch hospital care. First, the "6-clicks" was translated by using a forward-backward translation protocol. Next, 64 patients were assessed by the physiotherapist to determine the validity while being admitted to the Internal Medicine wards of a university medical center. Six hypotheses were tested regarding the construct "mobility" which showed that: Better "6-clicks" scores were related to less restrictive pre-admission living situations (p = 0.011), less restrictive discharge locations (p = 0.001), more independence in activities of daily living (p = 0.001) and less physiotherapy visits (p Dutch "6-clicks" shows a good construct validity and moderate-to-excellent inter-rater reliability when used to assess the mobility of hospitalized patients. Implications for Rehabilitation Even though various measurement tools have been developed, it appears the majority of physiotherapists working in a hospital currently do not use these tools as a standard part of their care. The Activity Measure for Post-Acute Care "6-clicks" Basic Mobility is the only tool which is designed to be short, easy to use within usual care and has been validated in the entire hospital population. This study shows that the Dutch version of the Activity Measure for Post-Acute Care "6-clicks" Basic Mobility form is a valid, easy to use, quick tool to assess the basic mobility of Dutch hospitalized patients.

Experimental studies of Steel Corrugated Constructions

Directory of Open Access Journals (Sweden)

Lazarev Yuriy

2016-01-01

Full Text Available The purpose of this particular article is to assess existing calculations of steel corrugated constructions. Steel Corrugated Construction is a perspective type of constructions, which is exhibiting numerous advantages in comparison with one that currently applied in automobile and railroad networks (reinforced concrete water-throughput pipes, reinforced concrete frame bridges. The evaluation of experimental data on models of constructions of this particular type has been carried out in order to improve calculations of Steel Corrugated Constructions.

Construction and initial operation of MHD PbLi facility at UCLA

International Nuclear Information System (INIS)

Kunugi, T.; Yokomine, T.; Ueki, Y.; Smolentsev, S.; Li, F.-C.; Sketchley, T.; Abdou, M.A.; Yuki, K.

2014-01-01

We review current accomplishments in Task 1-3 'Flow Control and Thermofluid Modeling' of the Japan-US 'TITAN' collaboration program. Our task focuses on experimental activities and also computer modeling of magnetohydrodynamic flows and heat and mass transfer of electrically conducting fluids under conditions relevant to fusion blankets. Since our task started, major efforts were taken to design, construct and test a new magnetohydrodynamic lead-lithium (PbLi) loop at UCLA, to accumulate the PbLi handling technology, and to develop a high-temperature ultrasonic Doppler velocimetry and a differential-pressure measurement system for PbLi flows. In the present paper, the loop construction, the electromagnetic pump performance test, our on-going experiments with the constructed loop are described. (author)

Passivity enhancement by series LC filtered active damper with zero current reference

DEFF Research Database (Denmark)

Bai, Haofeng; Wang, Xiongfei; Blaabjerg, Frede

2016-01-01

can be improved by enhancing the passivity of the total admittance seen by the grid, which allows for a zero current reference and a much simpler current controller for the active damper. To show the performance of the active damper with zero reference, this paper first carries out the impedance based...... stability analysis of grid converters in the weak grid. Based on the impedance model of the series LC filtered active damper, the real part of its output admittance is investigated and shown to be able to enhance the passivity of the admittance of the converters seen by the grid. Finally, simulation...

Solid construction waste management in large civil construction companies through use of specific software - case study

OpenAIRE

Caio Dalla Zanna; Fernando Fernandes; José Carlos Gasparine

2017-01-01

In the current construction market there is a high demand for sustainability. In addition to that the Brazilian government is enacting tougher and tougher legislation on the disposal of solid construction waste. These demands increasingly make the construction company responsible for the entire lifecycle of its waste as well as the accompanying cost and environmental impact of solid waste. A software program was used in the research which allows construction companies gather information about...

A cyclic GMP-dependent calcium-activated chloride current in smooth-muscle cells from rat mesenteric resistance arteries

DEFF Research Database (Denmark)

Matchkov, Vladimir; Aalkjær, Christian; Nilsson, Holger

2004-01-01

We have previously demonstrated the presence of a cyclic GMP (cGMP)-dependent calcium-activated inward current in vascular smooth-muscle cells, and suggested this to be of importance in synchronizing smooth-muscle contraction. Here we demonstrate the characteristics of this current. Using......M) in the pipette solution. The current was found to be a calcium-activated chloride current with an absolute requirement for cyclic GMP (EC50 6.4 microM). The current could be activated by the constitutively active subunit of PKG. Current activation was blocked by the protein kinase G antagonist Rp-8-Br-PET-cGMP...... differed from those of the calcium-activated chloride current in pulmonary myocytes, which was cGMP-independent, exhibited a high sensitivity to inhibition by niflumic acid, was unaffected by zinc ions, and showed outward current rectification as has previously been reported for this current. Under...

Muscarinic activation of Ca2+-activated Cl- current in interstitial cells of Cajal.

Science.gov (United States)

Zhu, Mei Hong; Sung, In Kyung; Zheng, Haifeng; Sung, Tae Sik; Britton, Fiona C; O'Driscoll, Kate; Koh, Sang Don; Sanders, Kenton M

2011-09-15

Interstitial cells of Cajal (ICC) provide pacemaker activity and functional bridges between enteric motor nerve terminals and gastrointestinal smooth muscle cells. The ionic conductance(s) in ICC that are activated by excitatory neural inputs are unknown. Transgenic mice (Kit(copGFP/+)) with constitutive expression of a bright green fluorescent protein were used to investigate cellular responses of ICC to cholinergic stimulation. ICC displayed spontaneous transient inward currents (STICs) under voltage clamp that corresponded to spontaneous transient depolarizations (STDs) under current clamp. STICs reversed at 0 mV when E(Cl) = 0 mV and at -40 mV when E(Cl) was -40 mV, suggesting the STICs were due to a chloride conductance. Carbachol (CCh, 100 nm and 1 μm) induced a sustained inward current (depolarization in current clamp) and increased the amplitude and frequency of STICs and STDs. CCh responses were blocked by atropine (10 μm) or 4-DAMP (100 nm), an M(3) receptor antagonist. STDs were blocked by niflumic acid and 5-nitro-2-(3-phenylpropylamino)-benzoic acid (both 100 μm), and CCh had no effect in the presence of these drugs. The responses of intact circular muscles to CCh and stimulation of intrinsic excitatory nerves by electrical field stimulation (EFS) were also compared. CCh (1 μm) caused atropine-sensitive depolarization and increased the maximum depolarization of slow waves. Similar atropine-sensitive responses were elicited by stimulation of intrinsic excitatory neurons. Niflumic acid (100 μm) blocked responses to EFS but had minor effect on responses to exogenous CCh. These data suggest that different ionic conductances are responsible for electrical responses elicited by bath-applied CCh and cholinergic nerve stimulation.

Phonological and conceptual activation in speech comprehension

NARCIS (Netherlands)

Norris, D.; Cutler, A.; McQueen, J.M.; Butterfield, S.

2006-01-01

We propose that speech comprehension involves the activation of token representations of the phonological forms of current lexical hypotheses, separately from the ongoing construction of a conceptual interpretation of the current utterance. In a series of cross-modal priming experiments,

General super Virasoro construction on affine G

International Nuclear Information System (INIS)

Mohammedi, N.

1990-10-01

We consider a bosonic current algebra and a theory of free fermions and construct a general N = 1 super Virasoro current algebra. We obtain a master-set of equations which comprises the bosonic master equation for general Virasoro construction on affine G. As an illustration we study the case of the group SU(2). (author). 13 refs

Antiviral Activity of HIV gp120 Targeting Bispecific T Cell Engager (BiTE®) Antibody Constructs.

Science.gov (United States)

Brozy, Johannes; Schlaepfer, Erika; Mueller, Christina K S; Rochat, Mary-Aude; Rampini, Silvana K; Myburgh, Renier; Raum, Tobias; Kufer, Peter; Baeuerle, Patrick A; Muenz, Markus; Speck, Roberto F

2018-05-02

Today's gold standard in HIV therapy is the combined antiretroviral therapy (cART). It requires strict adherence by patients and life-long medication, which can lower the viral load below detection limits and prevent HIV-associated immunodeficiency, but cannot cure patients. The bispecific T cell engaging (BiTE®) antibody technology has demonstrated long-term relapse-free outcomes in patients with relapsed and refractory acute lymphocytic leukemia. We here generated BiTE® antibody constructs that target the HIV-1 envelope protein gp120 (HIV gp120) using either the scFv B12 or VRC01, the first two extracellular domains (1+2) of human CD4 alone or joined to the single chain variable fragment (scFv) of the antibody 17b fused to an anti-human CD3ϵ scFv. These engineered human BiTE® antibody constructs showed engagement of T cells for redirected lysis of HIV gp120-transfected CHO cells. Furthermore, they substantially inhibited HIV-1 replication in PBMCs as well as in macrophages co-cultured with autologous CD8+ T-cells, the most potent being the human CD4(1+2) BiTE® antibody construct and the CD4(1+2)L17b BiTE® antibody construct. The CD4(1+2) h BiTE® antibody construct promoted HIV infection of human CD4-/CD8+ T cells. In contrast, the neutralizing B12 and the VRC01 BiTE® antibody constructs as well as the CD4(1+2)L17b BiTE® antibody construct did not. Thus, BiTE® antibody constructs targeting HIV gp120 are very promising for constraining HIV and warrant further development as novel antiviral therapy with curative potential. Importance HIV is a chronic infection well controlled with the current cART. However, we lack cure of HIV, and the HIV pandemic goes on. Here we showed in vitro and ex vivo t hat a bispecific T-cell engaging (BiTE®) antibody construct targeting HIV gp120 resulted in substantially reduced HIV replication. In addition, these BiTE® antibody constructs display efficient killing of gp120 expressing cells and inhibited replication in ex vivo

Siting history and current construction status of disposal facility for low and intermediate level radioactive waste in Korea

International Nuclear Information System (INIS)

Sakai, Akihiro; Kikuchi, Saburo; Maruyama, Masakatsu

2008-01-01

Korean government decided disposal site for low and intermediate level radioactive waste (LILW), which is located at coastal area near the Wolsong nuclear power plants in Gyeong-Ju city in December. 2005, based on the result of votes of residents in four candidate sites. Since then, Korea Hydro and Nuclear Power Co., Ltd (KHNP), which is the management company of the LILW disposal facility, has carried out the preparation for construction of disposal facility and its licensing process. At the first phase, 100 thousand drums in 200 liter are planned to be disposed of in the rock cavern type disposal facility located at the depth from 80m to 130m below the sea level, and finally 800 thousand drums in 200 liter are planned to be disposed of in the site. This report shows the history of siting for the LILW disposal, the outline of design of disposal facility and current status of its construction, based on the information which was obtained mainly during our visit to the disposal site in Korea. (author)

Current status of construction of nuclear power plants No. 7, No. 8 in Korea

International Nuclear Information System (INIS)

Sug, S.H.

1979-01-01

The up-to-date accomplishment and future work in the construction of nuclear power plants in Korea are outlined. The scope of the construction project of the No. 7 and No. 8 power plants, selection of the suppliers of the main instruments, assessment of the planning, architecture, engineering, construction fund, procurement of nuclear fuel, and the necessities of home production of various nuclear materials are briefly summarized. (author)

Comparative study of microcontroller controlled four-wire voltage and current source shunt active power filters

Energy Technology Data Exchange (ETDEWEB)

Pettersson, S.

2009-07-01

During the past two decades, active power filters have increasingly grown their popularity as a viable method for improving electric power quality. The main reasons for this have been the advent of fast self-commutating solid-state devices, the progression of digital technology and the improved sensor technology. Four-wire active power filters provide an efficient solution for improving the quality of supply in grounded three-phase systems or three-phase systems with neutral conductors, which are commonly used for powering residential, office and public buildings. Four-wire active power filters are applicable in compensating current harmonics, reactive power, neutral current and load phase imbalance.This thesis presents a comparative study of microcontroller controlled four-wire voltage and current source shunt active power filters. The study includes two voltage source topologies and a current source topology with two different dc-link energy storage structures, which are compared on the basis of their filtering properties, filtering performance and efficiency. The obtained results are used for determining the suitability of current source technology for four-wire active power filtering and finding the most viable four-wire shunt active power filter topology. One commonly recognized disadvantage of the current source active power filter has always been the bulky dc-link inductor. To reduce the size of the dc-link inductor, an alternative dc-link structure for current source active power filters was introduced in the late 80's. The hybrid energy storage consists of both inductive and capacitive energy storage elements, two diodes and two controllable semiconductor switching devices. Since the capacitive element is used as a main storage unit, the inductance of the dc-link inductor can be considerably reduced. However, the original dc current control method proposed is not able to utilize the full potential of the hybrid energy storage and the inductance

Cell cycle-dependent activity of the volume- and Ca2+-activated anion currents in Ehrlich lettre ascites cells

DEFF Research Database (Denmark)

Klausen, Thomas Kjaer; Bergdahl, Andreas; Christophersen, Palle

2007-01-01

Recent evidence implicates the volume-regulated anion current (VRAC) and other anion currents in control or modulation of cell cycle progression; however, the precise involvement of anion channels in this process is unclear. Here, Cl- currents in Ehrlich Lettre Ascites (ELA) cells were monitored...... during cell cycle progression, under three conditions: (i) after osmotic swelling (i.e., VRAC), (ii) after an increase in the free intracellular Ca2+ concentration (i.e., the Ca2+-activated Cl- current, CaCC), and (iii) under steady-state isotonic conditions. The maximal swelling-activated VRAC current......+ in the pipette), was unaltered from G0 to G1, but decreased in early S phase. A novel high-affinity anion channel inhibitor, the acidic di-aryl-urea NS3728, which inhibited both VRAC and CaCC, attenuated ELA cell growth, suggesting a possible mechanistic link between cell cycle progression and cell cycle...

AP1000 construction schedule

International Nuclear Information System (INIS)

Winters, J.W.

2001-01-01

Westinghouse performed this study as part of EPRI interest in advancing the use of computer aided processes to reduce the cost of nuclear power plants. EPRI believed that if one could relate appropriate portions of an advanced light water reactor plant model to activities in its construction sequence, and this relationship could be portrayed visually, then optimization of the construction sequence could be developed as never before. By seeing a 3-D representation of the plant at any point in its construction sequence, more informed decisions can be made on the feasibility or attractiveness of follow on or parallel steps in the sequence. The 3-D representation of construction as a function of time (4-D) could also increase the confidence of potential investors concerning the viability of the schedule and the plant ultimate cost. This study performed by Westinghouse confirmed that it is useful to be able to visualize a plant construction in 3-D as a function of time in order to optimize the sequence of construction activities. (author)

Lessons Learned from Past and Ongoing Construction Projects

International Nuclear Information System (INIS)

Tabatabai, Omid

2011-01-01

Full text of publication follows: The nuclear industry in the U.S. faced many construction quality and design issues in the 1970's and 1980's. In 1984, the NRC issued NUREG-1055, 'Improving Quality and the Assurance of Quality in the Design and Construction of Nuclear Power Plants,' to document the lessons learned from nuclear power plant (NPP) construction in the U.S. In recent years, several countries have begun either planning for or actually constructing new NPPs. For instance, in the U.S., the nuclear industry has submitted several combined license and design certification applications to the NRC for licensing reviews and approval to build 30+ new NPP units. Latest construction experience from countries that are currently building new NPPs indicate that these countries are dealing with challenges that are similar to those issues that caused major quality assurance problems, delays, or even termination of several projects in U.S. in the 70's and 80's. The U.S. NRC is pro-actively taking measures to improve its regulatory programs as well as construction oversight activities before new NPPs construction begin in the U.S. In late 2007, the U.S. NRC's Office of New Reactors established a construction experience program (ConE) to obtain and evaluate construction and operating experience events and to identify the lessons learned from these events. In March 2009, the NRC published an Office Instruction to provide a process for incorporating the lessons learned and insights from the design, construction, and operation of the international and domestic NPPs into the licensing reviews, inspections, and construction of new reactors in the U.S. Additionally, the ConE program staff developed a Web-enabled database to store, manage, and make construction experience information available to all NRC technical reviewers as well as inspectors. Because this database contains information from other countries' regulators that are considered

NEW INSTRUMENTS FOR MANAGEMENT OF CONSTRUCTION PROGRAMS AND PROJECTS IN THE NEW ECONOMY STRUCTURE

Directory of Open Access Journals (Sweden)

Silka Dmitriy Nikolaevich

2017-11-01

Full Text Available Subject: the new economy structure is directly related to the active application of digital technologies. Economic processes are more formalized and for making administrative decisions it becomes possible to operate in a greater degree with precise criteria and information than probabilistic assumptions. As a subject of research, new tools for managing construction programs and projects are presented. Research objectives: the purpose of the study is to formulate general principles and directions for the digitization of economic relations in investment and construction activities to ensure the effectiveness of implementation of new generation projects. Materials and methods: to achieve the goal, the article shows the composition of state programs and projects in the construction sector and the system problems of their implementation. Organizational methods of increasing their effectiveness are considered. Results: the most promising areas of implementation of new management tools for investment and construction programs and projects are identified. Conclusions: the article shows the current dynamics of changes in technical and socio-economic systems at the level of construction sector. It is pointed out that the tasks of socio-economic nature require the development of unique approaches since the peculiarities of Russian legislation, of the prevailing norms and rules of economic activity prevent the direct replication of successful foreign experience.

Early-life exposure to caffeine affects the construction and activity of cortical networks in mice.

Science.gov (United States)

Fazeli, Walid; Zappettini, Stefania; Marguet, Stephan Lawrence; Grendel, Jasper; Esclapez, Monique; Bernard, Christophe; Isbrandt, Dirk

2017-09-01

The consumption of psychoactive drugs during pregnancy can have deleterious effects on newborns. It remains unclear whether early-life exposure to caffeine, the most widely consumed psychoactive substance, alters brain development. We hypothesized that maternal caffeine ingestion during pregnancy and the early postnatal period in mice affects the construction and activity of cortical networks in offspring. To test this hypothesis, we focused on primary visual cortex (V1) as a model neocortical region. In a study design mimicking the daily consumption of approximately three cups of coffee during pregnancy in humans, caffeine was added to the drinking water of female mice and their offspring were compared to control offspring. Caffeine altered the construction of GABAergic neuronal networks in V1, as reflected by a reduced number of somatostatin-containing GABA neurons at postnatal days 6-7, with the remaining ones showing poorly developed dendritic arbors. These findings were accompanied by increased synaptic activity in vitro and elevated network activity in vivo in V1. Similarly, in vivo hippocampal network activity was altered from the neonatal period until adulthood. Finally, caffeine-exposed offspring showed increased seizure susceptibility in a hyperthermia-induced seizure model. In summary, our results indicate detrimental effects of developmental caffeine exposure on mouse brain development. Copyright © 2017 Elsevier Inc. All rights reserved.

Analysis of the background noise of field effect transistors in MOS complementary technology and application in the construction of a current-sensitive integrated amplifier

International Nuclear Information System (INIS)

Beuville, E.

1989-10-01

A low noise amplifier for use in high energy physics is developed. The origin and the mechanisms of the noise in MOSFET transistors is carried out with the aim of minimizing such effects in amplifiers. The research is applied in the construction of a current-sensitive integrated amplifier. The time scale continuous filtering principle is used and allows the detection of particles arriving in the counter in a random distribution. The rules which must be taken into account in the construction of an analog integrated circuit are shown [fr

Single-current-sensor-based active front-end-converter-fed four ...

Indian Academy of Sciences (India)

Joseph Kiran Banda

Keywords. Field-oriented control; vector control of induction motor; active front end converter; power factor correction .... sinusoidal three-phase input currents applied to the stator. ... with necessary feed-forward terms are employed to control.

DSP based adaptive hysteresis-band current controlled active filter ...

African Journals Online (AJOL)

The use of non-linear loads critically affects the quality of supply by drawing harmonic currents and reactive power from the electrical distribution system. Active power filters are the most viable solution for solving such power quality problems in compliance with the harmonic standards. This article presents a digital signal ...

The method of using current regulations and standards in designing management and technologies of construction

Directory of Open Access Journals (Sweden)

Sinenko Sergey

2017-01-01

Full Text Available Economic efficiency of using funds in construction of buildings and structures begins from an effective, proper design, which is based on modern, cutting-edge, advanced equipment, streamlined organization and process solutions of construction operations. In the light of this it is considered application of “Self-Organization and Technology of Building” multifunctional software package capable of solving various engineering tasks on designing management of construction operations in accordance with the applicable rules and regulations in view of using software for automatic generation of workflow. Implementing this software in the construction management processes may help to solve management tasks at the construction site.

Modelling the factors influencing the selection of the construction equipment for Indian construction organizations

Directory of Open Access Journals (Sweden)

S.V.S. Raja Prasad

2016-09-01

Full Text Available The contribution of Indian construction sector to the GDP is approximately 10%. Under new government policy, it is anticipated that $1000 Billion share for exclusively infrastructure segment would be completed within the next few years. Construction sector in developing country like India still depends on labor and the practice of mechanization, adopting to use of versatile construction equipment is not in force. The need for implementing new technologies and automation is essential to improve the quality, safety and efficiency. To meet the challenges ahead the construction, organizations should focus on utilization of machinery/equipment to achieve desirable results. Modern construction is characterized by the increase in utilization of equipment to accomplish numerous construction activities. The selection of construction equipment often affects the required amount of time and effort. It is therefore important for managements of construction organizations and planners to be familiar with the features of various types of equipment commonly used in construction activities. The selection of appropriate equipment is a crucial decision making process as it involves huge capital investment. The purpose of the present study is to develop a model pertaining to the factors influencing the selection of construction equipment by using interpretive structural modelling and the results indicate that productivity and safety are the important factors in selection of equipment in Indian construction organizations.

Effects of current physical activity on affective response to exercise: physical and social-cognitive mechanisms.

Science.gov (United States)

Magnan, Renee E; Kwan, Bethany M; Bryan, Angela D

2013-01-01

Affective responses during exercise are often important determinants of exercise initiation and maintenance. Current physical activity may be one individual difference that is associated with the degree to which individuals have positive (or negative) affective experiences during exercise. The objective of this study was to explore physical and cognitive explanations of the relationship between current activity status (more versus less active) and affective response during a 30-minute bout of moderate-intensity exercise. Participants reported their current level of physical activity, exercise self-efficacy and affect during a 30-minute bout of moderate-intensity exercise. More active individuals experienced higher levels of positive affect and tranquillity and lower levels of negative affect and fatigue during exercise. Multivariate models for each affective state indicated separate processes through which physical activity may be associated with changes in affect during exercise. These models indicate that affect experienced during physical activity is related to the current activity level and these relationships can be partially explained by the physical and cognitive factors explored in this study. Recommendations for future research to elucidate whether positive affective response to physical activity improves as a function of becoming more active over time are discussed.

Effect of long construction times on utility financial requirements

International Nuclear Information System (INIS)

Francis, J.M.

1981-01-01

It is well-known that long construction times significantly increase the cost of an individual nuclear plant. Long construction times, however, are not confined to either a single plant or a single utility. Rather, they apparently occur in almost all nuclear plants currently under construction. The total financial requirement to complete the 82 nuclear plants currently under construction was assessed. The analysis was performed assuming a construction time of ten years in one case, and six years in another. It was found that decreasing the construction time from ten to six years will reduce the financial requirements of the utility industry by $89 billion

Large-scale performance and design for construction activity erosion control best management practices.

Science.gov (United States)

Faucette, L B; Scholl, B; Beighley, R E; Governo, J

2009-01-01

The National Pollutant Discharge Elimination System (NPDES) Phase II requires construction activities to have erosion and sediment control best management practices (BMPs) designed and installed for site storm water management. Although BMPs are specified on storm water pollution prevention plans (SWPPPs) as part of the construction general permit (GP), there is little evidence in the research literature as to how BMPs perform or should be designed. The objectives of this study were to: (i) comparatively evaluate the performance of common construction activity erosion control BMPs under a standardized test method, (ii) evaluate the performance of compost erosion control blanket thickness, (iii) evaluate the performance of compost erosion control blankets (CECBs) on a variety of slope angles, and (iv) determine Universal Soil Loss Equation (USLE) cover management factors (C factors) for these BMPs to assist site designers and engineers. Twenty-three erosion control BMPs were evaluated using American Society of Testing and Materials (ASTM) D-6459, standard test method for determination of ECB performance in protecting hill slopes from rainfall induced erosion, on 4:1 (H:V), 3:1, and 2:1 slopes. Soil loss reduction for treatments exposed to 5 cm of rainfall on a 2:1 slope ranged from-7 to 99%. For rainfall exposure of 10 cm, treatment soil loss reduction ranged from 8 to 99%. The 2.5 and 5 cm CECBs significantly reduced erosion on slopes up to 2:1, while CECBs or= 4:1 when rainfall totals reach 5 cm. Based on the soil loss results, USLE C factors ranged from 0.01 to 0.9. These performance and design criteria should aid site planners and designers in decision-making processes.

APPLIED ORGANIZATION OF CONSTRUCTION

Directory of Open Access Journals (Sweden)

Kievskiy Leonid Vladimirovich

2017-03-01

Full Text Available Applied disciplines in the sphere of construction which are engaged in the solution of vital macroeconomical problems (the general trend of development of these disciplines is the expansion of problematics and mutual integration are considered. Construction organization characteristic at the present stage as a systems engineering discipline covering the investment process of creation of real estate items, is given. The main source of current research trends for applied sciences (socio-economic development forecasts, regional and local programs is determined. Interpenetration and integration of various fields of knowledge exemplified by the current interindustry problem of blocks renovation organization of existing development, is demonstrated. Mathematical model of wave construction (for the period of deployment is proposed. Nature of dependence of the total duration of renovation on the limit of annual input and coefficient of renovation, is established. Overall structure of the Moscow region housing market is presented, and approaches to definition of effective demand are proposed.

Muscarinic activation of Ca2+-activated Cl− current in interstitial cells of Cajal

Science.gov (United States)

Zhu, Mei Hong; Sung, In Kyung; Zheng, Haifeng; Sung, Tae Sik; Britton, Fiona C; O'Driscoll, Kate; Koh, Sang Don; Sanders, Kenton M

2011-01-01

Abstract Interstitial cells of Cajal (ICC) provide pacemaker activity and functional bridges between enteric motor nerve terminals and gastrointestinal smooth muscle cells. The ionic conductance(s) in ICC that are activated by excitatory neural inputs are unknown. Transgenic mice (KitcopGFP/+) with constitutive expression of a bright green fluorescent protein were used to investigate cellular responses of ICC to cholinergic stimulation. ICC displayed spontaneous transient inward currents (STICs) under voltage clamp that corresponded to spontaneous transient depolarizations (STDs) under current clamp. STICs reversed at 0 mV when ECl = 0 mV and at –40 mV when ECl was –40 mV, suggesting the STICs were due to a chloride conductance. Carbachol (CCh, 100 nm and 1 μm) induced a sustained inward current (depolarization in current clamp) and increased the amplitude and frequency of STICs and STDs. CCh responses were blocked by atropine (10 μm) or 4-DAMP (100 nm), an M3 receptor antagonist. STDs were blocked by niflumic acid and 5-nitro-2-(3-phenylpropylamino)-benzoic acid (both 100 μm), and CCh had no effect in the presence of these drugs. The responses of intact circular muscles to CCh and stimulation of intrinsic excitatory nerves by electrical field stimulation (EFS) were also compared. CCh (1 μm) caused atropine-sensitive depolarization and increased the maximum depolarization of slow waves. Similar atropine-sensitive responses were elicited by stimulation of intrinsic excitatory neurons. Niflumic acid (100 μm) blocked responses to EFS but had minor effect on responses to exogenous CCh. These data suggest that different ionic conductances are responsible for electrical responses elicited by bath-applied CCh and cholinergic nerve stimulation. PMID:21768263

Current Activities of the Joint Council on Economic Education.

Science.gov (United States)

Highsmith, Robert J.

1987-01-01

Reviews current activities of the Joint Council, among them, a researcher training institute, a new K-12 economic education scope and sequence document, a junior high level test of economic knowledge, an instructional package for advanced placement classes, a textbook conference, a project to help teachers of students who work with at-risk…

Spin-zero mesons and current algebras

International Nuclear Information System (INIS)

Wellner, M.

1977-01-01

Large chiral algebras, using the f and d coefficients of SU(3) can be constructed with spin-1/2 baryons. Such algebras have been found useful in some previous investigations. This article examines under what conditions similar or identical current algebras may be realized with spin-0 mesons. A curious lack of analogy emerges between meson and baryon currents. Second-class currents, made of mesons, are required in some algebras. If meson and baryon currents are to satisfy the same extended SU(3) algebra, four meson nonets are needed, in terms of which we give an explicit construction for the currents

Photocatalytic activity of silver oxide capped Ag nanoparticles constructed by air plasma irradiation

Science.gov (United States)

Fang, Yingcui; Wu, Qingmeng; Li, Huanhuan; Zhang, Bing; Yan, Rong; Chen, Junling; Sun, Mengtao

2018-04-01

We construct a kind of structure of silver oxide capped silver nanoparticles (AgNPs) by cost-efficient air plasma irradiation, and study its visible-light driven photocatalytic activity (PA). By controlling the oxidization time, the relationship between the intensity of the localized surface plasmon resonance (LSPR) and the PA is well established. The PA reaches the maximum when the LSPR of AgNPs is nearly completely damped (according to absorption spectra); however, under this condition, the LSPR still works, confirmed with the high efficient selective transformation of p-Aminothiophenol (PATP) to p, p'-dimercaptoazobenzene (DMAB) under visible light. The mechanism of the LSPR damping induced PA improvement is discussed. We not only provide a cost-efficient approach to construct a LSPR strong damping structure but also promote the understanding of LSPR strong damping and its relationship with photocatalysis.

Appendix VI: KHNP staffing plan of construction site office: ULCHIN 5 and 6 construction project (ROK)

International Nuclear Information System (INIS)

2008-01-01

KHNP, as an owner/operator organization, is responsible for all project activities including design, procurement, construction, and commissioning, for Korea's nuclear power plant (NPP) construction projects. Four separate functional offices of KHNP are set up to complete the construction management work. These offices are (1) home office, (2) field construction office, (3) field quality assurance office, and (4) field startup/commissioning office. This paper presents a staffing plan for the field construction office starting initial project implementation to final turnover to operations stages. It is recognized that the plan may not be applicable to other utility situations in terms of project management of site activity depending upon how the overall project contract is structured

Interleaved Buck Converter with Variable Number of Active Phases and a Predictive Current Sharing Scheme

DEFF Research Database (Denmark)

Jakobsen, Lars Tønnes; Garcia, O.; Oliver, J. A.

2008-01-01

The efficiency of an interleaved Buck converter is typically low at light load conditions because of the switching losses in each of the switching stages. Improvements in the converter efficiency can be achieved by dynamically changing the number of active phases depending on the load current....... This paper addresses the issues related to the transient response of the converter when the number of active phases is changed by a digital control scheme. The problem arises because the current in the individual phases of the interleaved Buck converter will not be equal immediately after the controller has...... changed the number of active phases. This paper proposes a current equalisation scheme that adjusts the duty cycle of each phase in a manner that ensures equal average inductor current in all active phases in one or two PWM periods. The current equalisation scheme relies on the measurement of the output...

Construction in Occupied Spaces

Directory of Open Access Journals (Sweden)

Ward Andrew E.

2017-06-01

Full Text Available Conducting construction activities in occupied environments presents a great challenge due to the additional logistical requirements and the presence of the building occupants. The aim of this research is to gather and evaluate the means and methods to successfully plan, manage, and execute construction activities in occupied spaces in an effort to provide consolidated industry tools and strategies for maintaining a schedule and minimizing the impact on the occupants. The methodology of the research utilizes an exploratory approach to gather qualitative data. The data was collected through interviews with industry professionals to identify industry best practices. The semi-structured interviews provided a platform for the documents, lessons learned, and the techniques and strategies used for occupied construction by the construction industry. The information obtained in the interview process identified six themes that are critical to achieving and maintaining quality in occupied construction. These themes of the schedule, cost, customer satisfaction, planning, fire/life safety and utilities, and contractor management are reviewed in detail, and the paper discusses how to manage each element. The analysis and extracted management techniques, procedures and strategies can be used by the construction industry for future projects by focusing on the critical aspects of occupied construction and the manner in which to succeed with it.

Construction in Occupied Spaces

Science.gov (United States)

Ward, Andrew E.; Azhar, Salman; Khalfan, Malik

2017-06-01

Conducting construction activities in occupied environments presents a great challenge due to the additional logistical requirements and the presence of the building occupants. The aim of this research is to gather and evaluate the means and methods to successfully plan, manage, and execute construction activities in occupied spaces in an effort to provide consolidated industry tools and strategies for maintaining a schedule and minimizing the impact on the occupants. The methodology of the research utilizes an exploratory approach to gather qualitative data. The data was collected through interviews with industry professionals to identify industry best practices. The semi-structured interviews provided a platform for the documents, lessons learned, and the techniques and strategies used for occupied construction by the construction industry. The information obtained in the interview process identified six themes that are critical to achieving and maintaining quality in occupied construction. These themes of the schedule, cost, customer satisfaction, planning, fire/life safety and utilities, and contractor management are reviewed in detail, and the paper discusses how to manage each element. The analysis and extracted management techniques, procedures and strategies can be used by the construction industry for future projects by focusing on the critical aspects of occupied construction and the manner in which to succeed with it.

3D printed constructs with antibacterial or antitumor activity for surgical treatment of bone defects in cancer patients

Science.gov (United States)

Sergeeva, N. S.; Sviridova, I. K.; Komlev, V. S.; Karalkin, P. A.; Kirsanova, V. A.; Akhmedova, S. A.; Shanskij, Ya. D.; Kuvshinova, E. A.; Fedotov, A. Yu.; Teterina, A. Yu.; Barinov, S. M.

2017-09-01

The concept of functionalization with bioactive molecules and drugs is one of the most advanced areas of modern bone tissue biomaterial science in terms of enhancement of their osteoconductive and therapeutic properties. The purpose of this study was to develop the approaches for 3D printing of sodium alginate /gelatin /octacalcium phosphate-based constructs with antibacterial and antitumor activity intended for bone defects replacement in the patients with malignant diseases. In this work, we evaluated the drug release kinetic and physicochemical characteristics of the constructs, as well as their specific activity, biocompatibility and osteoplastic properties in in vitro and in vivo tests. The experimental results proved the principal possibility of creating the biocompatible bone substitutes with antibacterial/antitumor activity and maintaining osteoconductive properties by means of 3D printing method.

CONSTRUCTIVE EDUCATIONAL ENVIRONMENT SCHOOL-UNIVERSITY

Directory of Open Access Journals (Sweden)

Natalya Petrovna Shatalova

2016-02-01

Full Text Available The article presents the results of the study the key components of the development of constructive thinking of students on the basis of model building constructive educational environment school-University. It was conducted from a position of constructive approach in education, as a process of systemic-structural methodology of cognitive and creative activity of the student, promotes development and formation of various constructive qualities of the individual. The functions of constructive educational environment school-University aimed at developing constructive thinking of students, defined by its structural components and connections, shows the consistency of self-development of constructive thinking and job satisfaction the development of constructive skills. The findings reveal innovative possibilities of cooperation of schools and universities in the design and functioning model of constructive educatio-nal space that contributes to the development of constructive thinking of all its stakeholders.Purpose: measuring the effectiveness of the model constructive educational environment school-University aimed at the development of students.Methodology: the Programme of research included: (1 diagnosis of the development level of constructive thinking on the questionnaire developed in the context of the constructive theory of education, (2 augmented and revised by the author the diagnosis of satisfaction and importance model of constructive educational environment school-University by the method of G.A. Gagarin, as well as theoretical modeling, method of involved observation, formal teaching method.Results. The article introduces the concept of «constructive learning environments», which are considered in relation to the organization and conduct of joint activities of teachers, teachers and students. The authors give a theoretical comparative analysis of scientific works of colleagues in the context of the problem. Offer a brief

Motivation for physical activity in children: a moving matter in need for study.

Science.gov (United States)

Pannekoek, Linda; Piek, Jan P; Hagger, Martin S

2013-10-01

Motivation for physical activity in children below the age of 12 years is a largely underrepresented issue in contemporary research. Although engagement in sufficient physical activity is highly important for children's current and later health, relatively little is known of the factors that motivate children to be physically active. Various theories have been developed in an attempt to explain motivation toward physical activity in adults. Recent developments have focussed on integrating constructs of these theories in order to attain a comprehensive account of motivated behavior. The relationships between different motivational constructs have generally been investigated in healthy adolescents and adults. This manuscript outlines why more theoretically driven research into children's motivation toward physical activity is needed. Constructs stemming from various motivational theories and their interrelationship as evidenced in youth and adults will be summarized. The current state of research on the applicability of these motivational constructs to children, and the generalizability of the interrelationship between the constructs to child samples will be outlined. A deeper insight into the motivational determinants of physical activity participation in children could inform the design of interventions to facilitate the development of physically active lifestyles that persist at older ages. Copyright © 2013 Elsevier B.V. All rights reserved.

Why developmental niche construction is not selective niche construction: and why it matters.

Science.gov (United States)

Stotz, Karola

2017-10-06

In the last decade, niche construction has been heralded as the neglected process in evolution. But niche construction is just one way in which the organism's interaction with and construction of the environment can have potential evolutionary significance. The constructed environment does not just select for , it also produces new variation. Nearly 3 decades ago, and in parallel with Odling-Smee's article 'Niche-constructing phenotypes', West and King introduced the 'ontogenetic niche' to give the phenomena of exo genetic inheritance a formal name. Since then, a range of fields in the life sciences and medicine has amassed evidence that parents influence their offspring by means other than DNA (parental effects), and proposed mechanisms for how heritable variation can be environmentally induced and developmentally regulated. The concept of 'developmental niche construction' (DNC) elucidates how a diverse range of mechanisms contributes to the transgenerational transfer of developmental resources. My most central of claims is that whereas the selective niche of niche construction theory is primarily used to explain the active role of the organism in its selective environment, DNC is meant to indicate the active role of the organism in its developmental environment. The paper highlights the differences between the construction of the selective and the developmental niche, and explores the overall significance of DNC for evolutionary theory.

High Performance Carbon Nanotube Yarn Supercapacitors with a Surface-Oxidized Copper Current Collector.

Science.gov (United States)

Zhang, Daohong; Wu, Yunlong; Li, Ting; Huang, Yin; Zhang, Aiqing; Miao, Menghe

2015-11-25

Threadlike linear supercapacitors have demonstrated high potential for constructing fabrics to power electronic textiles (eTextiles). To improve the cyclic electrochemical performance and to produce power fabrics large enough for practical applications, a current collector has been introduced into the linear supercapcitors to transport charges produced by active materials along the length of the supercapacitor with high efficiency. Here, we first screened six candidate metal filaments (Pt, Au, Ag, AuAg, PtCu, and Cu) as current collectors for carbon nanotube (CNT) yarn-based linear supercapacitors. Although all of the metal filaments significantly improved the electrochemical performance of the linear supercapacitor, two supercapacitors constructed from Cu and PtCu filaments, respectively, demonstrate far better electrochemical performance than the other four supercapacitors. Further investigation shows that the surfaces of the two Cu-containing filaments are oxidized by the surrounding polymer electrolyte in the electrode. While the unoxidized core of the Cu-containing filaments remains highly conductive and functions as a current collector, the resulting CuO on the surface is an electrochemically active material. The linear supercapacitor architecture incorporating dual active materials CNT + Cu extends the potential window from 1.0 to 1.4 V, leading to significant improvement to the energy density and power density.

Voltage Dependence of a Neuromodulator-Activated Ionic Current123

Science.gov (United States)

2016-01-01

Abstract The neuromodulatory inward current (IMI) generated by crab Cancer borealis stomatogastric ganglion neurons is an inward current whose voltage dependence has been shown to be crucial in the activation of oscillatory activity of the pyloric network of this system. It has been previously shown that IMI loses its voltage dependence in conditions of low extracellular calcium, but that this effect appears to be regulated by intracellular calmodulin. Voltage dependence is only rarely regulated by intracellular signaling mechanisms. Here we address the hypothesis that the voltage dependence of IMI is mediated by intracellular signaling pathways activated by extracellular calcium. We demonstrate that calmodulin inhibitors and a ryanodine antagonist can reduce IMI voltage dependence in normal Ca2+, but that, in conditions of low Ca2+, calmodulin activators do not restore IMI voltage dependence. Further, we show evidence that CaMKII alters IMI voltage dependence. These results suggest that calmodulin is necessary but not sufficient for IMI voltage dependence. We therefore hypothesize that the Ca2+/calmodulin requirement for IMI voltage dependence is due to an active sensing of extracellular calcium by a GPCR family calcium-sensing receptor (CaSR) and that the reduction in IMI voltage dependence by a calmodulin inhibitor is due to CaSR endocytosis. Supporting this, preincubation with an endocytosis inhibitor prevented W7 (N-(6-aminohexyl)-5-chloro-1-naphthalenesulfonamide hydrochloride)-induced loss of IMI voltage dependence, and a CaSR antagonist reduced IMI voltage dependence. Additionally, myosin light chain kinase, which is known to act downstream of the CaSR, seems to play a role in regulating IMI voltage dependence. Finally, a Gβγ-subunit inhibitor also affects IMI voltage dependence, in support of the hypothesis that this process is regulated by a G-protein-coupled CaSR. PMID:27257619

A Novel Sliding Mode Control Technique for Indirect Current Controlled Active Power Filter

Directory of Open Access Journals (Sweden)

Juntao Fei

2012-01-01

Full Text Available A novel sliding mode control (SMC method for indirect current controlled three-phase parallel active power filter is presented in this paper. There are two designed closed loops in the system: one is the DC voltage controlling loop and the other is the reference current tracking loop. The first loop with a PI regulator is used to control the DC voltage approximating to the given voltage of capacitor, and the output of PI regulator through a low-pass filter is applied as the input of the power supply reference currents. The second loop implements the tracking of the reference currents using integral sliding mode controller, which can improve the harmonic treating performance. Compared with the direct current control technique, it is convenient to be implemented with digital signal processing system because of simpler system structure and better harmonic treating property. Simulation results verify that the generated reference currents have the same amplitude with the load currents, demonstrating the superior harmonic compensating effects with the proposed shunt active power filter compared with the hysteresis method.

Constructive Consumer Choice Processes.

OpenAIRE

Bettman, James R; Luce, Mary Frances; Payne, John W

1998-01-01

Consumer decision making has been a focal interest in consumer research, and consideration of current marketplace trends ( e.g., technological change, an information explosion) indicates that this topic will continue to be critically important. We argue that consumer choice is inherently constructive. Due to limited processing capacity, consumers often do not have well-defined existing preferences, but construct them using a variety of strategies contingent on task demands. After describing c...

VE of construction industry

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-10-15

This book gives descriptions of basic of VE of construction industry including doing away with mannerism, necessity of cost reduction, management method of cost reduction, thinking of idea, target of VE, starting VE activity, technical method of VE of construction industry such as thinking of idea with brainstorming, function trade method, new brainstorming, MM method, morphology analysis and lateral thinking, cases of VE of construction industry.

VE of construction industry

International Nuclear Information System (INIS)

1987-10-01

This book gives descriptions of basic of VE of construction industry including doing away with mannerism, necessity of cost reduction, management method of cost reduction, thinking of idea, target of VE, starting VE activity, technical method of VE of construction industry such as thinking of idea with brainstorming, function trade method, new brainstorming, MM method, morphology analysis and lateral thinking, cases of VE of construction industry.

Innovative Organization of Project Activity of Construction Students

Science.gov (United States)

Stolbova, I. D.; Aleksandrova, E. P.; Krainova, M. N.

2017-11-01

The construction industry competitiveness depends on its equipping with information modeling technologies. This requires training and development of human resources. The advantages of BIM-technologies are considered. The requirements for the specialists capable of promoting information modeling technologies in the construction industry are discussed. For a wide application of BIM-technologies, the problem of training personnel with a new thinking must be solved. When preparing graduates of the major “Construction”, it is necessary to introduce innovative educational technologies aimed at building the students’ ability for team work, competences in the field of modern information and communication technologies, as well as design skills basing on spatial modeling. Graphic training is the first discipline of the professional orientation for construction students. In the context of training it is important to create such learning environment that is close to a professional one. The paper provides the examples of practice-oriented assignments based on the project method in the course of students’ independent work.

An explicit construction of Wakimoto realizations of current algebras

International Nuclear Information System (INIS)

Boer, J. de; Feher, L.

1996-05-01

It is known from a work of Feigin and Frenkel that a Wakimoto type, generalized free field realization of the current algebra g k can be associated with each parabolic subalgebra P = (g 0 + g + ) of the Lie algebra g, where in the standard case g 0 is the Cartan and P is the Borel subalgebra. In this letter we obtain an explicit formula for the Wakimoto realization in the general case. Using Hamiltonian reduction of the WZNW model, we first derive a Poisson bracket realization of the g-valued current in terms of simplistic bosons belonging to g + and a current belonging to g 0 . We then quantize the formula by determining the correct normal ordering. We also show that the affine-Sugawara stress-energy tensor takes the expected quadratic form in the constituents. (author)

An Exploration of the Relationship between Training Grants and Profitability of UK Construction Companies

Science.gov (United States)

Abdel-Wahab, Mohamed; Dainty, Andrew R. J.; Ison, Stephen G.; Hazlehurst, Guy

2008-01-01

A levy/grant system exists in the UK construction industry to provide financial support for companies undertaking training activities. With the current UK government skills policy, there is an emphasis on ensuring that training support provided to employers is aimed at enhancing companies' profitability. This paper explores the profitability of…

45 CFR 1170.33 - New construction.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 3 2010-10-01 2010-10-01 false New construction. 1170.33 Section 1170.33 Public... ASSISTED PROGRAMS OR ACTIVITIES Accessibility § 1170.33 New construction. (a) Design, construction, and... Federal Accessibility Standards. (1) Effective as of January 18, 1991, design, construction, or alteration...

Current-day matters of administration and law in the field of high-rise construction

Science.gov (United States)

Voskresenskaya, Elena; Snetkov, Vitaly; Tebryaev, Alexander

2018-03-01

The article touches upon main reasons for high-rise construction: increase in energy consumption and limited availability of site in the big cities of Russia. Increase in energy consumption is related with construction, transportation and applying of ventilation and air conditioning systems. Nowadays, there are developed a lot of design and engineer solutions, that include autonomous systems as well as passive methods with low energy consumption rate, which are interrelated with local climate conditions. Certain architectural solutions contribute to energy consumption decrease: building orientation with respect to the cardinal directions, taking into account the prevailing cold wind directions, maximum glazing of the southern facades and minimum glazing of the northern ones, what plays a big role in hard climate conditions. Limited availability of site for construction in the big cities resulted in rapid development of the high-rise construction, which today prevails in terms of quantitative indicators of civil engineering.

Construction appraisal team inspection results on welding and nondestructive examination activities

International Nuclear Information System (INIS)

Wu, P.C.S.; Shaaban, H.I.

1987-09-01

This report summarizes data and findings on deficiencies and discrepancies in welding and nondestructive examination (NDE) activities identified by the US Nuclear Regulatory Commission Construction Appraisal Team (CAT) during its inspection of 11 plants. The CAT reviewed selected welds and NDE packages in its inspection of the following plant areas: piping and pipe supports and/or restraints; modification and installation of reactor internals; electrical installations and electrical supports; instrumentation tubing and supports; heating, ventilation, and air conditioning (HVAC) systems and supports; fabrication and erection of structural steel; fabrication of refueling cavity and spent fuel pool liner; containment liner and containment penetrations; and fire protection systems. The CAT inspected both structural welds and pressure-retaining welds and reviewed welder qualification test records and welding procedure documents for code compliance. The NDE activities that were evaluated included visual examination, magnetic particle examination, liquid penetrant examination, ultrasonic examination, and radiographic examination of welds. 4 refs., 14 figs., 15 tabs

ASME nuclear codes and standards: Scope of coverage and current initiatives

International Nuclear Information System (INIS)

Eisenberg, G. M.

1995-01-01

The objective of this paper is to address the broad scope of coverage of nuclear codes, standards and guides produced and administered by the American Society of Mechanical Engineers (ASME). Background information is provided regarding the evolution of the present activities. Details are provided on current initiatives intended to permit ASME to meet the needs of a changing nuclear industry on a worldwide scale. During the early years of commercial nuclear power, ASME produced a code for the construction of nuclear vessels used in the reactor coolant pressure boundary, containment and auxiliary systems. In response to industry growth, ASME Code coverage soon broadened to include rules for construction of other nuclear components, and inservice inspection of nuclear reactor coolant systems. In the years following this, the scope of ASME nuclear codes, standards and guides has been broadened significantly to include air cleaning activities for nuclear power reactors, operation and maintenance of nuclear power plants, quality assurance programs, cranes for nuclear facilities, qualification of mechanical equipment, and concrete reactor vessels and containments. ASME focuses on globalization of its codes, standards and guides by encouraging and promoting their use in the international community and by actively seeking participation of international members on its technical and supervisory committees and in accreditation activities. Details are provided on current international representation. Initiatives are underway to separate the technical requirements from administrative and enforcement requirements, to convert to hard metric units, to provide for non-U. S. materials, and to provide for translations into non-English languages. ASME activity as an accredited ISO 9000 registrar for suppliers of mechanical equipment is described. Rules are being developed for construction of containment systems for nuclear spent fuel and high-level waste transport packagings. Intensive

Sustainable construction: construction and demolition waste reconsidered.

Science.gov (United States)

del Río Merino, Mercedes; Izquierdo Gracia, Pilar; Weis Azevedo, Isabel Salto

2010-02-01

Construction activity in Europe has increased substantially in the past decade. Likewise, there has also been a commensurate rise in the generation of construction and demolition waste (C&DW). This, together with the fact that in many European countries the rate of recycling and reuse of C&DW is still quite low has engendered a serious environmental problem and a motivation to develop strategies and management plans to solve it. Due to its composition, there is a significant potential to reuse and/or recycle C&DW, and thereby, contribute to improving the sustainability of construction and development, but practical procedures are not yet widely known or practiced in the construction industry. This article (a) summarizes the different applications that are presently practiced to optimize the recovery and/or application of C&DW for reuse, and (b) proposes various measures and strategies to improve the processing of this waste. The authors suggest that to enhance environmental effectiveness, a conscious and comprehensive C&DW management plan should be implemented in each jurisdiction. More precisely, this study presents a holistic approach towards C&DW management, through which environmental benefits can be achieved through the application of new construction methods that can contribute to sustainable growth.

The communication in industrialised building system (IBS) construction project: Virtual environment

Science.gov (United States)

Pozin, Mohd Affendi Ahmad; Nawi, Mohd Nasrun Mohd

2017-10-01

Large portion of numbers team organization in the IBS construction sector is known are being fragmented. That is contributed from a segregation of construction activity thus create team working in virtually. Virtual team are the nature when teams are working in distributed area, across culture and time. Therefore, teams can be respond to the task without relocating to the site project and settle down a problem through information and communication technology (ICT). The emergence of virtual team are carry out by advancements in communication technologies as a medium to improve project team communication in project delivery process on IBS construction. Based on literature review from previous study and data collected from interviewing, this paper aim to identified communication challenges among project team members according to current project development practices in IBS construction project. Hence, in attempt to develop effective communication through the advantages of virtual team approach for IBS construction project. In order to ensure the data is gathered comprehensively and accurately, the data was collected from project managers by using semi structured interview method. It was found that virtual team approach could be enable competitive challenges on complexity in the construction project management process.

Architects' perspectives on construction waste reduction by design.

Science.gov (United States)

Osmani, M; Glass, J; Price, A D F

2008-01-01

The construction, demolition and excavation waste arising in England was estimated at 91 million tonnes in 2003. The current thinking on construction waste minimisation is heavily focussed on several issues relating to physical construction waste and recycling guides. Indeed, much had been published on ways to improve on-site waste management and recycling activities but very few attempts made to address the effect of design practices on waste generation. However, there is a consensus in the literature that the architect has a decisive role to play in helping to reduce waste by focussing on designing out waste. This paper examines previous studies on architects' approach towards construction waste minimisation; and by means of a postal questionnaire, investigates: the origins of waste; waste minimisation design practices in the UK; and responsibilities and barriers within the UK architectural profession. The findings reveal that waste management is not a priority in the design process. Additionally, the architects seemed to take the view that waste is mainly produced during site operations and rarely generated during the design stages; however, about one-third of construction waste could essentially arise from design decisions. Results also indicate that a number of constraints, namely: lack of interest from clients; attitudes towards waste minimisation; and training all act as disincentives to a proactive and sustainable implementation of waste reduction strategies during the design process.

Architects' perspectives on construction waste reduction by design

International Nuclear Information System (INIS)

Osmani, M.; Glass, J.; Price, A.D.F.

2008-01-01

The construction, demolition and excavation waste arising in England was estimated at 91 million tonnes in 2003. The current thinking on construction waste minimisation is heavily focussed on several issues relating to physical construction waste and recycling guides. Indeed, much had been published on ways to improve on-site waste management and recycling activities but very few attempts made to address the effect of design practices on waste generation. However, there is a consensus in the literature that the architect has a decisive role to play in helping to reduce waste by focussing on designing out waste. This paper examines previous studies on architects' approach towards construction waste minimisation; and by means of a postal questionnaire, investigates: the origins of waste; waste minimisation design practices in the UK; and responsibilities and barriers within the UK architectural profession. The findings reveal that waste management is not a priority in the design process. Additionally, the architects seemed to take the view that waste is mainly produced during site operations and rarely generated during the design stages; however, about one-third of construction waste could essentially arise from design decisions. Results also indicate that a number of constraints, namely: lack of interest from clients; attitudes towards waste minimisation; and training all act as disincentives to a proactive and sustainable implementation of waste reduction strategies during the design process

Experiences of nursing students and educators during the co-construction of clinical nursing leadership learning activities: A qualitative research and development study.

Science.gov (United States)

Ha, Laurence; Pepin, Jacinthe

2017-08-01

Student voice posits that students' unique perspectives on teaching and learning can be used in conjunction with those of educators to create meaningful educational activities. The study aimed to describe nursing students' and educators' experiences during the co-construction of educational activities involving clinical nursing leadership. Qualitative research and development model. The study was conducted at a French-Canadian nursing faculty that provides a 3-year undergraduate program. Five undergraduate nursing students, four nursing educators, and the principal investigator formed the co-construction team. Data collected included all documents (written and audio) related to the co-construction process: three 2-hour team meetings, PI's fieldnotes and a focus group discussion that occurred once the co-construction process was completed. Thematic analysis was performed guided by Paillé and Muchielli's (2010) method. Data analysis revealed two interrelated themes: (1) unique, purposeful collaboration and (2) change that makes a difference. A space described as safe, without hierarchy and that included the "right" people helped the team achieve their objective of creating new educational activities on clinical nursing leadership. The two new learning activities developed by the team were perceived as useful for future nursing students. At the individual level, team members appreciated how co-construction helped them understand teaching and learning from new perspectives. A structured, efficient co-construction process contributed to positive changes in the nursing program and participants. Additional research is required to enhance understanding of the factors that facilitate and hinder student-educator collaboration outside the classroom. Copyright © 2017 Elsevier Ltd. All rights reserved.

Current density and catalyst-coated membrane resistance distribution of hydro-formed metallic bipolar plate fuel cell short stack with 250 cm2 active area

Science.gov (United States)

Haase, S.; Moser, M.; Hirschfeld, J. A.; Jozwiak, K.

2016-01-01

An automotive fuel cell with an active area of 250 cm2 is investigated in a 4-cell short stack with a current and temperature distribution device next to the bipolar plate with 560 current and 140 temperature segments. The electrical conductivities of the bipolar plate and gas diffusion layer assembly are determined ex-situ with this current scan shunt module. The applied fuel cell consists of bipolar plates constructed of 75-μm-thick, welded stainless-steel foils and a graphitic coating. The electrical conductivities of the bipolar plate and gas diffusion layer assembly are determined ex-situ with this module with a 6% deviation in in-plane conductivity. The current density distribution is evaluated up to 2.4 A cm-2. The entire cell's investigated volumetric power density is 4.7 kW l-1, and its gravimetric power density is 4.3 kW kg-1 at an average cell voltage of 0.5 V. The current density distribution is determined without influencing the operating cell. In addition, the current density distribution in the catalyst-coated membrane and its effective resistivity distribution with a finite volume discretisation of Ohm's law are evaluated. The deviation between the current density distributions in the catalyst-coated membrane and the bipolar plate is determined.

The Culture of Construction Organisations: the Epitome of Institutionalised Corruption

Directory of Open Access Journals (Sweden)

Andrew Oyen Arewa

2015-08-01

Full Text Available The culture of an organisation is a vital element of business competency that must align with its strategic goals, and enhance peoples’ perceptions, feelings and behaviour in adapting to the world around them. Organisational culture may also bring about negative practices such as dishonesty and unethical behaviours. Recently the culture of some construction organisations has been called into question. For example, major construction projects around the globe have become involved in allegations of fraud and corruption. The cost is currently estimated at US$860 billion globally; with forecasts that it may rise to US$1.5 trillion by 2025. Hitherto the role of the culture of construction organisations in fraud and corruption activities has been largely hidden. The study aim is to establish whether the culture of construction organisations promotes corrupt practices in the UK construction and infrastructure sector. The study employed mixed research methods with interviews supported by a questionnaire and an examination of five case studies in different countries. Findings show that the culture of construction organisations together with the nature of the industry promotes fraud and corruption. The study subsequently highlights key cultural factors that support fraud and corruption in a way that is almost institutionalised.

Urinary plasmin activates collecting duct ENaC current in preeclampsia

DEFF Research Database (Denmark)

Buhl, KB; Friis, Ulla Glenert; Svenningsen, Per

2012-01-01

In nephrotic syndrome, plasminogen is aberrantly filtered from plasma to the urinary space and activated along the tubular system. In vitro, plasmin increases ENaC current by proteolytic cleavage of the γ-subunit. It was hypothesized that preeclampsia is associated with plasmin-dependent ability...

Current status of research and related activities in NAA application

International Nuclear Information System (INIS)

Ab Khalik bin Haji Wood

1999-01-01

Current activities of Analytical Chemistry Group of MINT (Malaysia Institute for Nuclear Technology Research) laboratory for elemental analysis of trace amounts in environmental samples such as air particulate matter (on air filter), soils/sediments, water, flora/fauna, oil sludge/waste sludge, and tailing/blasting slag and others, utilizing particularly NAA (Neutron Activation Analysis) method are reviewed. The laboratory participates in the IAEA-organized Interlaboratory Comparison Studies to ensure the analytical system. Other activities include analytical chemistry services with ICP-mass spectrometry and GC/GCMS to compliment the NAA and, moreover, air and marine pollution studies with participation in the UNDP/RCA/IAEA project. (S. Ohno)

Construction and operation of replacement hazardous waste handling facility at Lawrence Berkeley Laboratory

International Nuclear Information System (INIS)

1992-09-01

The US Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0423, for the construction and operation of a replacement hazardous waste handling facility (HWHF) and decontamination of the existing HWHF at Lawrence Berkeley Laboratory (LBL), Berkeley, California. The proposed facility would replace several older buildings and cargo containers currently being used for waste handling activities and consolidate the LBL's existing waste handling activities in one location. The nature of the waste handling activities and the waste volume and characteristics would not change as a result of construction of the new facility. Based on the analysis in the EA, DOE has determined that the proposed action would not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, 42 USC. 4321 et seq. Therefore, an environmental impact statement is not required

Active superconducting DC fault current limiter based on flux compensation

International Nuclear Information System (INIS)

Shi Jing; Tang Yuejin; Wang, Chen; Zhou Yusheng; Li Jingdong; Ren Li; Chen Shijie

2006-01-01

With the extensive application of DC power systems, suppression of DC fault current is an important subject that guarantees system security. This paper presents an active superconducting DC fault current limiter (DC-SFCL) based on flux compensation. The DC-SFCL is composed of two superconducting windings wound on a single iron core, the primary winding is in series with DC power system, and the second winding is connected with AC power system through a PWM converter. In normal operating state, the flux in the iron core is compensated to zero, and the SFCL has no influence on DC power system. In the case of DC system accident, through regulating the active power exchange between the SFCL's second winding and the AC power system, the current on the DC side can be limited to different level complying with the system demand. Moreover, the PWM converter that interface the DC system and AC system can be controlled as a reactive power source to supply voltage support for the AC side, which has little influence on the performance of SFCL. Using MATLAB SIMULINK, the mathematic model of the DC-SFCL is created, simulation results validate the dynamics of system, and the performance of DC-SFCL is confirmed

Axonal and glial currents activated during the post-tetanic hyperpolarization in non-myelinated nerve.

Science.gov (United States)

Robert, A; Jirounek, P

1998-07-01

Changes in membrane potential and potassium concentration in the extracellular space ([K+]e) of rabbit vagus nerve were measured simultaneously during electrical activity and during the period of recovery using a modified sucrose-gap method and potassium-sensitive microelectrodes. After stimulation for 15 s at 15 Hz the main activity-induced increase in [K+]e reached 16.9 mM. This increase in [K+]e was paralleled by a depolarization of the preparation. The period of activity was followed by a post-tetanic hyperpolarization (PTH) lasting tens of seconds, generated by the axonal electrogenic Na+-K+ pump and to a lesser extent by the pump of the surrounding Schwann cells. The amplitude of the PTH dramatically increased in experiments in which inward currents were blocked by removal of Cl– or after application of Cs+ or Ba2+, indicating that under normal conditions the current generated by the Na+-K+ pump is strongly short-circuited. A pharmacological and kinetic study showed that these currents are: (1) the hyperpolarization-activated current I h, and (2) the inwardly rectifying I KIR current. The results show that the latter originates from Schwann cells. Our data indicate that in non-myelinated nerves there is a subtle association of inward ionic channels which (1) helps the cell to maintain an optimal membrane potential after a period of activity, and (2) contributes to the removal of excess K+ from the extracellular space.

Modeling the sustainable development of innovation in transport construction based on the communication approach

Science.gov (United States)

Revunova, Svetlana; Vlasenko, Vyacheslav; Bukreev, Anatoly

2017-10-01

The article proposes the models of innovative activity development, which is driven by the formation of “points of innovation-driven growth”. The models are based on the analysis of the current state and dynamics of innovative development of construction enterprises in the transport sector and take into account a number of essential organizational and economic changes in management. The authors substantiate implementing such development models as an organizational innovation that has a communication genesis. The use of the communication approach to the formation of “points of innovation-driven growth” allowed the authors to apply the mathematical tools of the graph theory in order to activate the innovative activity of the transport industry in the region. As a result, the authors have proposed models that allow constructing an optimal mechanism for the formation of “points of innovation-driven growth”.

Gamma activation analysis with microtron

International Nuclear Information System (INIS)

Fiderkiewicz, A.; Kierzek, J.; Parus, J.; Swiderska-Kowalczyk, M.; Wolski, W.; Zoltowski, T.

1989-01-01

The physical principles of gamma activation analysis, its capabilities as well as its application to analyse polymetallic ores with use of mean power microtron are presented. Limits of detection and determination for above twenty elements occurring in those ores with use of short- and longlived radioisotopes are specified. The work contains conception of construction of race-track microtron with electrons energy adjusted in 10-30 MeV range and with current not less than 20 μA. Besides the development of microtrons, the reason for choosing the race-track construction for gamma activation analysis is given. 69 refs., 35 figs., 5 tabs. (author)

22 CFR 142.17 - New construction.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false New construction. 142.17 Section 142.17 Foreign... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Accessibility § 142.17 New construction. (a) Design and construction. Each facility or part of a facility constructed by, on behalf of, or for the use of a recipient...

22 CFR 217.23 - New construction.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false New construction. 217.23 Section 217.23 Foreign... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Accessibility § 217.23 New construction. (a) Design and construction. Each facility or part of a facility constructed by, on behalf of, or for the use of a recipient...

The nuclear force and the electromagnetic current operator

International Nuclear Information System (INIS)

Riska, D.O.

1985-01-01

The relation between the electromagnetic current operator and the nucleon-nucleon interaction is discussed. The assumptions needed for the construction of the two-body current operator directly from the isospin- and velocity dependent components of the interaction potential are described. The observable consequences of the exchange current operator that is constructed from the interaction are reviewed. (orig.)

Apelin-13 enhances arcuate POMC neuron activity via inhibiting M-current.

Directory of Open Access Journals (Sweden)

Dong Kun Lee

Full Text Available The hypothalamus is a key element of the neural circuits that control energy homeostasis. Specific neuronal populations within the hypothalamus are sensitive to a variety of homeostatic indicators such as circulating nutrient levels and hormones that signal circulating glucose and body fat content. Central injection of apelin secreted by adipose tissues regulates feeding and glucose homeostasis. However, the precise neuronal populations and cellular mechanisms involved in these physiological processes remain unclear. Here we examine the electrophysiological impact of apelin-13 on proopiomelanocortin (POMC neuron activity. Approximately half of POMC neurons examined respond to apelin-13. Apelin-13 causes a dose-dependent depolarization. This effect is abolished by the apelin (APJ receptor antagonist. POMC neurons from animals pre-treated with pertussis toxin still respond to apelin, whereas the Gβγ signaling inhibitor gallein blocks apelin-mediated depolarization. In addition, the effect of apelin is inhibited by the phospholipase C and protein kinase inhibitors. Furthermore, single-cell qPCR analysis shows that POMC neurons express the APJ receptor, PLC-β isoforms, and KCNQ subunits (2, 3 and 5 which contribute to M-type current. Apelin-13 inhibits M-current that is blocked by the KCNQ channel inhibitor. Therefore, our present data indicate that apelin activates APJ receptors, and the resultant dissociation of the Gαq heterotrimer triggers a Gβγ-dependent activation of PLC-β signaling that inhibits M-current.

Advanced construction methods in ACR

International Nuclear Information System (INIS)

Elgohary, M.; Choy, E.; Yu, S.K.W.

2002-01-01

The ACR - Advanced CANDU Reactor, developed by Atomic Energy of Canada Limited (AECL), is designed with constructability considerations as a major requirement during all project phases from the concept design stage to the detail design stage. This necessitated a much more comprehensive approach in including constructability considerations in the design to ensure that the construction duration is met. For the ACR-700, a project schedule of 48 months has been developed for the nth replicated unit with a 36 month construction period duration from First Concrete to Fuel Load. An overall construction strategy that builds on the success of the construction methods that are proven in the construction of the Qinshan CANDU 6 project has been developed for the ACR. The overall construction strategy comprises the 'Open Top' construction technique using a Very Heavy Lift crane, parallel construction activities, with extensive modularization and prefabrication. In addition, significant applications of up to date construction technology will be implemented, e.g. large volume concrete pours, prefabricated rebar, use of climbing forms, composite structures, prefabricated permanent formwork, automatic welding, and utilization of the latest electronic technology tools such as 3D CADDs modelling yields a very high quality, clash free product to allow construction to be completed 'right the first time' and eliminates rework. Integration of 3D CADDs models and scheduling tools such as Primavera has allowed development of actual construction sequences and an iterative approach to schedule verification and improvement. Modularization and prefabrication are major features of the ACR design in order to achieve the project schedule. For the reactor building approximately 80% of the volume will be installed as modules or prefabricated assembles. This ensures critical path activities are achieved. This paper examines the advanced construction methods implemented in the design in order to

Possibilities for Estimating Horizontal Electrical Currents in Active Regions on the Sun

Science.gov (United States)

Fursyak, Yu. A.; Abramenko, V. I.

2017-12-01

Part of the "free" magnetic energy associated with electrical current systems in the active region (AR) is released during solar flares. This proposition is widely accepted and it has stimulated interest in detecting electrical currents in active regions. The vertical component of an electric current in the photosphere can be found by observing the transverse magnetic field. At present, however, there are no direct methods for calculating transverse electric currents based on these observations. These calculations require information on the field vector measured simultaneously at several levels in the photosphere, which has not yet been done with solar instrumentation. In this paper we examine an approach to calculating the structure of the square of the density of a transverse electrical current based on a magnetogram of the vertical component of the magnetic field in the AR. Data obtained with the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamic Observatory (SDO) for the AR of NOAA AR 11283 are used. It is shown that (1) the observed variations in the magnetic field of a sunspot and the proposed estimate of the density of an annular horizontal current around the spot are consistent with Faraday's law and (2) the resulting estimates of the magnitude of the square of the density of the horizontal current {j}_{\\perp}^2 = (0.002- 0.004) A2/m4 are consistent with previously obtained values of the density of a vertical current in the photosphere. Thus, the proposed estimate is physically significant and this method can be used to estimate the density and structure of transverse electrical currents in the photosphere.

The effect of a self-constructed material on children's physical activity during recess.

Science.gov (United States)

Méndez-Giménez, Antonio; Cecchini, José-Antonio; Fernández-Río, Javier

2017-06-26

To analyze whether an intervention supported by free play with a self-constructed material increases the level of physical activity of students during recess. The participants were 166 children of third to sixth grade, between nine and 12 years old (average = 10.64; SS = 1.13). An experimental project was conducted with pre-test and post-test measurement, and a control group. Experimental group participants built cardboard paddles (third and fourth) and flying rings (fifth and sixth), a material they used freely for one week during recess. ActiGraph-GT3X accelerometers were used to measure physical activity. An ANOVA of repeated measures was used to find differences between groups and genders. Significant intervention effects were found in the analyzed variables: sedentary activity (F = 38.19; p estrategia a gestores y profesores para incrementar la actividad física de los niños durante el recreo.

Automatic Construction by Contour Crafting Technology

Directory of Open Access Journals (Sweden)

Mohammad Reza Khorramshahi

2017-07-01

Full Text Available Contour Crafting is a novel technology in construction industry based on 3D printing that uses robotics to construct free form building structures by repeatedly laying down layers of material such as concrete. It is actually an approach to scale up automatic fabrication from building small industrial parts to constructing buildings. However, there are little information about contour crafting (CC in current use; present paper aims to describe the operational steps of creating a whole building by the machine reviewing relevant literature. Furthermore, it will represent the advantages of CC usage compared to traditional construction methods, as well as its applicability in construction industry.

BIM-BASED SCHEDULING OF CONSTRUCTION

DEFF Research Database (Denmark)

Andersson, Niclas; Büchmann-Slorup, Rolf

2010-01-01

The potential of BIM is generally recognized in the construction industry, but the practical application of BIM for management purposes is, however, still limited among contractors. The objective of this study is to review the current scheduling process of construction in light of BIM...... and communicate. Scheduling on the detailed level, on the other hand, follows a stipulated approach to scheduling, i.e. the Last Planner System (LPS), which is characterized by involvement of all actors in the construction phase. Thus, the major challenge when implementing BIM-based scheduling is to improve...

State of the art on construction automation and robotic system in domestic and foreign construction industry

International Nuclear Information System (INIS)

Lee, Sung Uk; Seo, Yong Chil; Jung, Seung Ho; Cho, Jai Wan; Choi, Young Soo

2007-08-01

In this report, we review the existing concept of construction automation and also survey the state of the art on construction automation and robotic system in domestic and foreign construction industry. On the basis of the result of review and survey, we want to suggest an applicable robotic technology to construction industry and points to be duly considered for activating construction automation. We investigate the state of the art on construction automation and robotic system in domestic and foreign construction industry and also applicable area and direction of domestic construction automation and robotic system. We hope that construction automation and robotic technology, which are improved rapidly nowadays, can contribute to the growth of construction industry

Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting

Directory of Open Access Journals (Sweden)

Amit Panwar

2016-05-01

Full Text Available Recent developments in 3D printing technologies and design have been nothing short of spectacular. Parallel to this, development of bioinks has also emerged as an active research area with almost unlimited possibilities. Many bioinks have been developed for various cells types, but bioinks currently used for 3D printing still have challenges and limitations. Bioink development is significant due to two major objectives. The first objective is to provide growth- and function-supportive bioinks to the cells for their proper organization and eventual function and the second objective is to minimize the effect of printing on cell viability, without compromising the resolution shape and stability of the construct. Here, we will address the current status and challenges of bioinks for 3D printing of tissue constructs for in vitro and in vivo applications.

Generalized Virasoro constructions and higher spin gravity: An SL(3) example

International Nuclear Information System (INIS)

Mohammedi, N.

1990-06-01

We consider a SL(3) current algebra and construct bilinears in the currents. A multitude of new Virasoro algebras, differing from the usual Sugawara and coset constructions, are then obtained. Since the SL(3) current algebra is a hidden symmetry of W 3 -gravity, we apply our results to calculate the allowed range for the values of the matter central charge. We find that this depends crucially on a parameter arising from the Sugawara-like constructions. (author). 23 refs

Social Cognitive Constructs Did Not Mediate the BEAT Cancer Intervention Effects on Objective Physical Activity Behavior Based on Multivariable Path Analysis.

Science.gov (United States)

Rogers, Laura Q; Courneya, Kerry S; Anton, Phillip M; Hopkins-Price, Patricia; Verhulst, Steven; Robbs, Randall S; Vicari, Sandra K; McAuley, Edward

2017-04-01

Most breast cancer survivors do not meet physical activity recommendations. Understanding mediators of physical activity behavior change can improve interventions designed to increase physical activity in this at-risk population. Study aims were to determine the 3-month Better Exercise Adherence after Treatment for Cancer (BEAT Cancer) behavior change intervention effects on social cognitive theory constructs and the mediating role of any changes on the increase in accelerometer-measured physical activity previously reported. Post-treatment breast cancer survivors (N = 222) were randomized to BEAT Cancer or usual care. Assessments occurred at baseline, 3 months (M3), and 6 months (M6). Adjusted linear mixed model analysis of variance determined intervention effects on walking self-efficacy, outcome expectations, goal setting, and perceived barrier interference at M3. Path analysis determined mediation of intervention effects on physical activity at M6 by changes in social cognitive constructs during the intervention (i.e., baseline to M3). BEAT Cancer significantly improved self-efficacy, goals, negative outcome expectations, and barriers. Total path analysis model explained 24 % of the variance in M6 physical activity. There were significant paths from randomized intervention group to self-efficacy (β = 0.15, p social cognitive constructs, no significant indirect effects on physical activity improvements 3 months post-intervention were observed (NCT00929617).

Impact of climate and weather on the activities of the building and construction industry in South Africa

CSIR Research Space (South Africa)

De Villiers, GDT

1986-01-01

Full Text Available This study represents a quantitative survey of the impact of the climate and weather on the activities of the building and construction industry in South Africa. Seasonal productivity problems, the seasonal provision of special facilities...

Use sulfoferritic cements in construction

Science.gov (United States)

Samchenko, Svetlana V.; Zorin, Dmitriy A.

2018-03-01

Currently, high-rise construction has received increasing attention around the world. In the big cities under construction is less space and one solution is the high-rise construction. However, high-rise buildings use special requirements, such as strength, thermal insulation, wind load and others. When concrete is exposed to continuous loads by wind or to mechanical loads, it undergoes abrasion. Resistance to this process depends on the characteristics of materials that the concrete and finishing seams are made of. Research on increasing impact and abrasion resistance of calcium sulfoferrite-based cement stone from the perspective of formation of cement stone structure will be instrumental in developing durable materials for application in high-rise construction.

Managing Pre-Construction and Construction Risks on Project Sites in Abuja-Nigeria

Directory of Open Access Journals (Sweden)

Jimoh R.A.

2016-03-01

Full Text Available Managing risks in construction projects has been acknowledged as a key direction process for the purposes of attaining the project goal in terms of time, cost, quality, safety, and environmental sustainability. Hence, the paper evaluated pre-construction and construction risks on active project sites in Abuja-Nigeria. This was achieved using survey method through the self-administration of 35 questionnaires to the professionals handling the 35 identified projects being undertaking at that time. Results showed that errors and omissions in design and improperly defined project scope had mean score values of 3.03 and 2.54, respectively, were the construction risks most experienced by the professionals during pre-construction. On the other hand, fluctuation in market prices and delays with mean score values of 3.14 and 2.74, respectively, were the construction risks experienced by the professionals during the construction phase of the projects. It is recommended that procurement methods such as construction management should be adopted and stakeholders should keep to their own side of the bargain to avoid unnecessary delays.

Plant Engineering and Construction System with Knowledge Management: A Case Study in NPP Construction in Hitachi-GE NE

International Nuclear Information System (INIS)

Mochida, T.; Hamamoto, M.; Nakamitsu, N.

2016-01-01

Full text: Hitachi-GE Nuclear Energy, Ltd. (HGNE) has more than 40 years BWR plants construction experience. The company continues to develop plant engineering system and plant construction systems based on the experience and the lessons learned. Currently, these systems are integrated in a variety of knowledge bases using the latest information technology (IT). Their performance is continuously validated in the recent NPP constructions. Typical examples are shown as case studies for knowledge management. These plant engineering and construction management systems are essential to achieve the on-time and on-budget-goals in NPP construction projects. (author

Grid-Current-Feedback Active Damping for LCL Resonance in Grid-Connected Voltage-Source Converters

DEFF Research Database (Denmark)

Wang, Xiongfei; Blaabjerg, Frede; Loh, Poh Chiang

2016-01-01

This paper investigates active damping of LCL-filter resonance in a grid-connected voltage-source converter with only grid-current feedback control. Basic analysis in the s-domain shows that the proposed damping technique with a negative high-pass filter along its damping path is equivalent...... of phase-lag, in turn, helps to shrink the region of nonminimum-phase behavior caused by negative virtual resistance inserted unintentionally by most digitally implemented active damping techniques. The presented high-pass-filtered active damping technique with a single grid-current feedback loop is thus...

Construction Safety Forecast for ITER

Energy Technology Data Exchange (ETDEWEB)

cadwallader, lee charles

2006-11-01

The International Thermonuclear Experimental Reactor (ITER) project is poised to begin its construction activity. This paper gives an estimate of construction safety as if the experiment was being built in the United States. This estimate of construction injuries and potential fatalities serves as a useful forecast of what can be expected for construction of such a major facility in any country. These data should be considered by the ITER International Team as it plans for safety during the construction phase. Based on average U.S. construction rates, ITER may expect a lost workday case rate of < 4.0 and a fatality count of 0.5 to 0.9 persons per year.

An e-Learning environment for algorithmic: toward an active construction of skills

Directory of Open Access Journals (Sweden)

Abdelghani Babori

2016-07-01

Full Text Available Assimilating an algorithmic course is a persistent problem for many undergraduate students. The major problem faced by students is the lack of problem solving ability and flexibility. Therefore, students are generally passive, unmotivated and unable to mobilize all the acquired knowledge (loops, test, variables, etc. to deal with new encountered problems. Our study is structured around building, step by step, problem solving skills among novice learners. Our approach is based on the use of problem based learning in an e-Learning environment. We begin by establishing a cognitive model which represents knowledge elements, grouped into categories of skills, judged necessary to be appropriated. We then propose a problem built on a concrete situation which aims to actively construct a skill category. We conclude by presenting around the proposed problem a pedagogical scenario for the set of learning activities designed to be incorporated in an E-learning platform.

Review of current activities to model and measure the orbital debris environment in low-earth orbit

Science.gov (United States)

Reynolds, R. C.

A very active orbital debris program is currently being pursued at the NASA/Johnson Space Center (JSC), with projects designed to better define the current environment, to project future environments, to model the processes contributing to or constraining the growth of debris in the environment, and to gather supporting data needed to improve the understanding of the orbital debris problem and the hazard it presents to spacecraft. This paper is a review of the activity being conducted at JSC, by NASA, Lockheed Engineering and Sciences Company, and other support contractors, and presents a review of current activity, results of current research, and a discussion of directions for future development.

The construction of hierarchical structure on Ti substrate with superior osteogenic activity and intrinsic antibacterial capability

Science.gov (United States)

Huang, Ying; Zha, Guangyu; Luo, Qiaojie; Zhang, Jianxiang; Zhang, Feng; Li, Xiaohui; Zhao, Shifang; Zhu, Weipu; Li, Xiaodong

2014-01-01

The deficient osseointegration and implant-associated infections are pivotal issues for the long-term clinical success of endosteal Ti implants, while development of functional surfaces that can simultaneously overcome these problems remains highly challenging. This study aimed to fabricate sophisticated Ti implant surface with both osteogenic inducing activity and inherent antibacterial ability simply via tailoring surface topographical features. Micro/submciro/nano-scale structure was constructed on Ti by three cumulative subtractive methods, including sequentially conducted sandblasting as well as primary and secondary acid etching treatment. Topographical features of this hierarchical structure can be well tuned by the time of the secondary acid treatment. Ti substrate with mere micro/submicro-scale structure (MS0-Ti) served as a control to examine the influence of hierarchical structures on surface properties and biological activities. Surface analysis indicated that all hierarchically structured surfaces possessed exactly the same surface chemistry as that of MS0-Ti, and all of them showed super-amphiphilicity, high surface free energy, and high protein adsorption capability. Biological evaluations revealed surprisingly antibacterial ability and excellent osteogenic activity for samples with optimized hierarchical structure (MS30-Ti) when compared with MS0-Ti. Consequently, for the first time, a hierarchically structured Ti surface with topography-induced inherent antibacterial capability and excellent osteogenic activity was constructed. PMID:25146099

Accumulation of slowly activating delayed rectifier potassium current (IKs) in canine ventricular myocytes

DEFF Research Database (Denmark)

Stengl, Milan; Volders, Paul G A; Thomsen, Morten Bækgaard

2003-01-01

In guinea-pig ventricular myocytes, in which the deactivation of slowly activating delayed rectifier potassium current (IKs) is slow, IKs can be increased by rapid pacing as a result of incomplete deactivation and subsequent current accumulation. Whether accumulation of IKs occurs in dogs, in which...

Volunteering and overseas placements in the NHS: a survey of current activity.

Science.gov (United States)

Chatwin, John; Ackers, Louise

2016-10-19

The study aimed to establish current levels of overseas volunteering and placement activity across all staff grades within the National Health Service (NHS) in the North West of England. Cross-sectional survey. Descriptive statistics. 4 main regional hospitals in the North West of England, and additional NHS staff training events. Convenience sample of NHS staff (n=911). 911 NHS staff took part in the survey. The medical and dental staff group returned the highest number of responses (32.1%). 42% of staff reported some form of overseas volunteering or placement experience. Most staff took an international placement as students (33.6% men; 40.6% women). Medium-term placements were undertaken by 46.7% of men, and 52.5% of women. Settlement stays (ie, over 1 year) were reported by 7.6% men, and 8.3% women). The majority of respondents engaged in international placement were from the age groups incorporating 'below 25' to '41-50' (74%). Multiple placement experiences were uncommon: 2.5% of respondents reported three periods of overseas activity, and 1.5% reported four. All those with multiple placement experience came from the staff groups incorporating midwife/nurse/health visitor, and medical and dental. This survey captured a snapshot of current levels of volunteering and overseas placement activity across NHS staff grades in the North West. Owing to relatively homogenous organisational structures, findings are likely to broadly represent the position across the organisation as a whole. Although some degree of overseas placement activity is undertaken by a relatively high proportion of NHS staff, such activity is currently heavily skewed towards higher clinical staff grades. Significant numbers of allied health professionals and equivalent non-clinical cadres also report overseas experience, and we anticipate that the numbers will continue to rise if current policy initiatives gain momentum. Published by the BMJ Publishing Group Limited. For permission to use

Tricarbonyldichlororuthenium (II) dimer (CORM2) activates non-selective cation current in human endothelial cells independently of carbon monoxide releasing.

Science.gov (United States)

Dong, De-Li; Chen, Chang; Huang, Wei; Chen, Yan; Zhang, Xiao-Lan; Li, Zhe; Li, Yue; Yang, Bao-Feng

2008-08-20

Tricarbonyldichlororuthenium (II) dimer (CORM2) has been developed as carbon monoxide (CO) donor. We found that CORM2 activated a type of specific current which was distinct from the big-conductance Ca(2+)-activated K(+) current activated by CO in human umbilical vein endothelial cells (HUVECs). So the aim of the present study was to characterize the CORM2-induced current and to access the relation with CO releasing. CORM2 (100 microM) activated a kind of bi-directional current in HUVECs when the ramp protocol (holding potential 0 mV, from -120 mV to +120 mV) was applied. The current was not blocked by apamin, TRAM-34 and iberiotoxin, the small, intermediate and big-conductance Ca(2+) -activated K(+) channel blockers, and it was not sensitive to the pipette solution chelated with EGTA. CORM2 still activated the current when the chloride in the pipette solution was substituted by equal mol gluconic acid. Substitution of the sodium in the bath with choline significantly reduced the current activated by CORM2. The current was regarded as the non-selective cation current. The current showed slightly inward rectifier property and was not sensitive to Gd(3+) (100 microM), La(3+) (10 microM) or 2-aminoethoxydiphenyl borate (100 microM). CO (10 microM), CORM3 (100, 200 microM) and RuCl(3) (100 microM) were used as controls and showed no effect of the current activation. In conclusion, CORM2 activated the non-selective cation current in HUVECs independently of its CO releasing.

Engineering development in nuclear power plant construction

International Nuclear Information System (INIS)

Guenther, P.

1979-01-01

Proceeding from the up-to-now experience in the erection of nuclear power stations, especially of the first and second unit of the Greifswald nuclear power plant, the following essential aspects of the development of constructional engineering are discussed: (1) constructional features and criteria, (2) organizational management, (3) current status and problems in prelimary operations, and (4) possibilities of further expenditure reductions in constructing nuclear power stations

Dysfunctional amygdala activation and connectivity with the prefrontal cortex in current cocaine users

NARCIS (Netherlands)

Crunelle, C.L.; Kaag, A.M.; van den Munkhof, H.E.; Reneman, L.; Homberg, J.R.; Sabbe, B.; van den Brink, W.; van Wingen, G.

2015-01-01

OBJECTIVES: Stimulant use is associated with increased anxiety and a single administration of dexamphetamine increases amygdala activation to biologically salient stimuli in healthy individuals. Here, we investigate how current cocaine use affects amygdala activity and amygdala connectivity with the

Dysfunctional amygdala activation and connectivity with the prefrontal cortex in current cocaine users

NARCIS (Netherlands)

Crunelle, Cleo L.; Kaag, Anne Marije; van den Munkhof, Hanna E.; Reneman, Liesbeth; Homberg, Judith R.; Sabbe, Bernard; van den Brink, Wim; van Wingen, Guido

2015-01-01

Stimulant use is associated with increased anxiety and a single administration of dexamphetamine increases amygdala activation to biologically salient stimuli in healthy individuals. Here, we investigate how current cocaine use affects amygdala activity and amygdala connectivity with the prefrontal

Air Force construction automation/robotics

Science.gov (United States)

Nease, AL; Dusseault, Christopher

1994-01-01

The Air Force has several unique requirements that are being met through the development of construction robotic technology. The missions associated with these requirements place construction/repair equipment operators in potentially harmful situations. Additionally, force reductions require that human resources be leveraged to the maximum extent possible and that more stringent construction repair requirements push for increased automation. To solve these problems, the U.S. Air Force is undertaking a research and development effort at Tyndall AFB, FL to develop robotic teleoperation, telerobotics, robotic vehicle communications, automated damage assessment, vehicle navigation, mission/vehicle task control architecture, and associated computing environment. The ultimate goal is the fielding of robotic repair capability operating at the level of supervised autonomy. The authors of this paper will discuss current and planned efforts in construction/repair, explosive ordnance disposal, hazardous waste cleanup, fire fighting, and space construction.

VIP in construction: systematic development and evaluation of a multifaceted health programme aiming to improve physical activity levels and dietary patterns among construction workers

Directory of Open Access Journals (Sweden)

Viester Laura

2012-01-01

Full Text Available Abstract Background The prevalence of both overweight and musculoskeletal disorders (MSD in the construction industry is high. Many interventions in the occupational setting aim at the prevention and reduction of these health problems, but it is still unclear how these programmes should be designed. To determine the effectiveness of interventions on these health outcomes randomised controlled trials (RCTs are needed. The aim of this study is to systematically develop a tailored intervention for prevention and reduction of overweight and MSD among construction workers and to describe the evaluation study regarding its (cost-effectiveness. Methods/Design The Intervention Mapping (IM protocol was applied to develop and implement a tailored programme aimed at the prevention and reduction of overweight and MSD. The (cost- effectiveness of the intervention programme will be evaluated using an RCT. Furthermore, a process evaluation will be conducted. The research population will consist of blue collar workers of a large construction company in the Netherlands. Intervention The intervention programme will be aimed at improving (vigorous physical activity levels and healthy dietary behaviour and will consist of tailored information, face-to-face and telephone counselling, training instruction (a fitness "card" to be used for exercises, and materials designed for the intervention (overview of the company health promoting facilities, waist circumference measuring tape, pedometer, BMI card, calorie guide, recipes, and knowledge test. Main study parameters/endpoints The intervention effect on body weight and waist circumference (primary outcome measures, as well as on lifestyle behaviour, MSD, fitness, CVD risk indicators, and work-related outcomes (i.e. productivity, sick leave (secondary outcome measures will be assessed. Discussion The development of the VIP in construction intervention led to a health programme tailored to the needs of construction

Activation of the Ca2+-sensing receptors increases currents through inward rectifier K+ channels via activation of phosphatidylinositol 4-kinase.

Science.gov (United States)

Liu, Chung-Hung; Chang, Hsueh-Kai; Lee, Sue-Ping; Shieh, Ru-Chi

2016-11-01

Inward rectifier K + channels are important for maintaining normal electrical function in many cell types. The proper function of these channels requires the presence of membrane phosphoinositide 4,5-bisphosphate (PIP 2 ). Stimulation of the Ca 2+ -sensing receptor CaR, a pleiotropic G protein-coupled receptor, activates both G q/11 , which decreases PIP 2 , and phosphatidylinositol 4-kinase (PI-4-K), which, conversely, increases PIP 2 . How membrane PIP 2 levels are regulated by CaR activation and whether these changes modulate inward rectifier K + are unknown. In this study, we found that activation of CaR by the allosteric agonist, NPSR568, increased inward rectifier K + current (I K1 ) in guinea pig ventricular myocytes and currents mediated by Kir2.1 channels exogenously expressed in HEK293T cells with a similar sensitivity. Moreover, using the fluorescent PIP 2 reporter tubby-R332H-cYFP to monitor PIP 2 levels, we found that CaR activation in HEK293T cells increased membrane PIP 2 concentrations. Pharmacological studies showed that both phospholipase C (PLC) and PI-4-K are activated by CaR stimulation with the latter played a dominant role in regulating membrane PIP 2 and, thus, Kir currents. These results provide the first direct evidence that CaR activation upregulates currents through inward rectifier K + channels by accelerating PIP 2 synthesis. The regulation of I K1 plays a critical role in the stability of the electrical properties of many excitable cells, including cardiac myocytes and neurons. Further, synthetic allosteric modulators that increase CaR activity have been used to treat hyperparathyroidism, and negative CaR modulators are of potential importance in the treatment of osteoporosis. Thus, our results provide further insight into the roles played by CaR in the cardiovascular system and are potentially valuable for heart disease treatment and drug safety.

Construction Analysis during the Design Process

NARCIS (Netherlands)

Vries, de B.; Harink, J.M.J.; Martens, B.; Brown, A.

2005-01-01

4D CAD systems are used by contractors for visually checking the construction process. To enable simulation of the construction process, the construction planner links building components from a CAD model with the activities from a project planning. In this paper we describe a method to generate a

Tom Ford Construction, LLC Information Sheet

Science.gov (United States)

Tom Ford Construction, LLC (the Company) is located in Brentwood, Tennessee. The settlement involves renovation activities conducted at a property constructed prior to 1978, located in Nashville, Tennessee.

Construction sustainability with adobe bricks type elements

Directory of Open Access Journals (Sweden)

Andreea Hegyi

2016-06-01

Full Text Available Sustainability is a criterion defined in the 80, which is essential in all fields of current activity. At the moment, it can not talk about development without being taken into account sustainability criteria. It presents the ensuring for an harmonious development, in line with current needs, without to endanger the possibility to develop and satisfy the needs of future generations. The buildings of adobe bricks-type elements ensure successfully the conditions imposed by this criterion. This type of construction ensures the responsible use of renewable natural resources, the possibility of reuse and recycling of materials, contributes to environmental protection and to pollution reduction, to energy saving and it provides a cleaner and healthier living environment. Not least, the buildings of this type are accessible in terms of cost and can contribute to the development of other fields such as eco-tourism.

Towards improving construction labor productivity and projects’ performance

OpenAIRE

Mostafa E. Shehata; Khaled M. El-Gohary

2011-01-01

Proper management of resources in construction projects can yield substantial savings in time and cost. As construction is a labor-intensive industry, this paper focuses on labor productivity in the construction industry. This study considers the current state-of-the-art issues relevant to this subject. It covers the construction labor productivity definitions, aspects, measurements, factors affecting it, different techniques used for measuring it and modeling techniques. The main outcome fro...

Construct ability Improvement for Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Lee, Dae Soo; Lee, Jong Rim; Kim, Jong Ku [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

1997-12-31

The purpose of this study was to identify methods for improving the construct ability of nuclear power plants. This study reviewed several references of current construction practices of domestic and overseas nuclear plants in order to identify potential methods for improving construct ability. The identified methods for improving construct ability were then evaluated based on the applicability to domestic nuclear plant construction. The selected methods are expected to reduce the construction period, improve the quality of construction, cost, safety, and productivity. Selection of which methods should be implemented will require further evaluation of construction modifications, design changes, contract revisions. Among construction methods studied, platform construction methods can be applied through construction sequence modification without significant design changes, and Over the Top construction method of the NSSS, automatic welding of RCL pipes, CLP modularization, etc., are considered to be applied after design modification and adjustment of material lead time. (author). 49 refs., figs., tabs.

Elaboration of technology organizational models of constructing high-rise buildings in plans of construction organization

Science.gov (United States)

Osipenkova, Irina; Simankina, Tatyana; Syrygina, Taisiia; Lukinov, Vitaliy

2018-03-01

This article represents features of the elaboration of technology organizational models of high-rise building construction in technology organizational documentation on the example of the plan of construction organization. Some examples of enhancing the effectiveness of high-rise building construction based on developments of several options of the organizational and technological plan are examined. Qualitative technology organizational documentation allows to increase the competitiveness of construction companies and provides prime cost of construction and assembly works reductions. Emphasis is placed on the necessity to comply with the principle of comprehensiveness of engineering, scientific and research works, development activities and scientific and technical support.

RA Construction KC, LLC Information Sheet

Science.gov (United States)

RA Construction KC, LLC (the Company) is located in Gladstone, Missouri. The settlement involves renovation activities conducted at a property constructed prior to 1978, located in Kansas City, Missouri.

Relationship Between Visual Constructive Abilities and Activity of Daily Living in Home Dwelling Elderly Population

Directory of Open Access Journals (Sweden)

Negin Chehrehnegar

2016-07-01

Full Text Available Objectives: Increasing life expectancy and decreasing birthrates have significantly contributed to an increased aging population throughout the world. This sudden change is a global phenomenon often resulting in biological changes that may have various consequences, such as reduced life power and coping skills in the elderly population. Cognitive deficits are one of the most severe impairments in the elderly people. Deficits in cognitive abilities, especially visual constructive skills, can have a considerable impact on the independency of the daily living skills of the elderly people. Self-care by individuals to maintain their life and wellbeing is a key element for their independency. The activity of daily living (ADL can support personal life independency, and is considered as a morbidity index. In the present cross-sectional study, we assessed the visual abilities and ADL in older subjects to determine whether cognitive impairment is associated with changes in self-care behavior. Methods & Materials: This study employed random sampling technique to select and recruit forty seven individuals aged between 60 to 80 years from Jahandidegan club in Shiraz, Iran. They were evaluated through "visual constructive ability" sub-scale from Loewenstein Occupational Therapy Cognitive Assessment (LOTCA battery and "Katz Index", which were used to assess their associated skill and ADL, respectively. Data was collected through observation and interviews. Data analysis was performed through Pearson's correlation test using SPSS. Results: The mean age of the participants (9 women and 38 men was 69.94±4.66 years. Lower scores in cognitive domains predicted functional decline in some scales. There was a significant correlation between visual constructive ability and eating; however, no significant correlation was found between this sub-scale with bathing, moving, toileting, and bowel control. Conclusion: In summary, a significant correlation was noted

Currents on Grassmann algebras

International Nuclear Information System (INIS)

Coquereaux, R.; Ragoucy, E.

1993-09-01

Currents are defined on a Grassmann algebra Gr(N) with N generators as distributions on its exterior algebra (using the symmetric wedge product). The currents are interpreted in terms of Z 2 -graded Hochschild cohomology and closed currents in terms of cyclic cocycles (they are particular multilinear forms on Gr(N)). An explicit construction of the vector space of closed currents of degree p on Gr(N) is given by using Berezin integration. (authors). 10 refs

Logistic description of investment and construction management

Directory of Open Access Journals (Sweden)

Sborshchikov Sergey Borisovich

2014-01-01

Full Text Available The article is devoted to the questions of defining dynamic behavior of investment and construction activity as a technical and economic system and its formalized description. It is offered to use the term "condition vector" as one of the main characteristics while describing investment and construction activity. Logistic interpretation of a sustainable development of investment and construction defines the concept of optimum trajectory, which considers various dependencies of its components (construction operations, their preparation, design, material, technique, personnel, information, investment, etc.. It is necessary to point out that this state is homeostatic, which means, the managing system must provide continuous monitoring of each system component of investment and construction activities in accordance with the sustainable development pathway. The concept of dynamic balance used in logistics is identical to the concept of homeostatic balance, which is accepted in system engineering. It is defined as a property of technical and economic system, which implies that its deviations from the development pathway lie within admissible values.

PERFORMANCE-BASED CONTRACTING IN CONSTRUCTION PHASE AND MAINTENANCE PHASE OF PAVEMENT

Science.gov (United States)

Yoshida, Takeshi

Performance-based contracting for pavement in Japan started as performance warranties in construction phase, in 1999. Recently, road agencies have recognized the applicability of this type of contracting in outsourcing of maintenance activities. The objectives of this study are to clarify the issues of performance specifying in construction phase and maintenance phase of pavement, and to propose measures to be taken. This paper, with the recognition that the life of each pavement depends on performance standards for various attributes, reviews domestic and foreign examples of performance-based contracting. A performance standard based on the average of current practices can enhance product quality and service life with a warranty contract. Repair thresholds and response time for each deficiency should be considered as performance standards in maintenance phase.

State of offsite construction in India-Drivers and barriers

Science.gov (United States)

Arif, M.; Bendi, D.; Sawhney, A.; Iyer, K. C.

2012-05-01

The rapid growth of the construction industry in India has influenced key players in the industry to adopt alternative technologies addressing time, cost and quality. The rising demand in housing, infrastructure and other facilities have further highlighted the need for the construction industry to look at adopting alternate building technologies. Offsite construction has evolved as a panacea to dealing with the under-supply and poor quality in the current age construction industry. Several offsite techniques have been adopted by the construction sector. Although, different forms of offsite techniques have been around for a while but their uptake has been low in the Indian context. This paper presents the perceptions about offsite construction in India and highlights some of the barriers and drivers facing the Indian construction industry. The data was gathered through a survey of 17 high level managers from some of the largest stakeholder organizations of the construction sector in India. The influence of time and cost has been highlighted as a major factor fuelling the adoption of offsite construction. However, the influence of current planning systems and the need for a paradigm shift are some of the prominent barriers towards the adoption of offsite techniques.

Modelling and analysis of the transformer current resonance in dual active bridge converters

DEFF Research Database (Denmark)

Qin, Zian; Shen, Zhan; Blaabjerg, Frede

2017-01-01

Due to the parasitic capacitances of the transformer and inductor in Dual Active Bridge (DAB) converters, resonance happens in the transformer currents. This high frequency resonant current flowing into the full bridges will worsen their soft-switching performance and thereby reduce its efficiency....... In order to study the generation mechanism of this current resonance, the impedance of the transformer and inductor with parasitic components is modelled in this digest. Then, based on the impedance model, an approach is proposed to mitigate the current resonance. Finally, both the impedance model...

Functional Metagenomics: Construction and High-Throughput Screening of Fosmid Libraries for Discovery of Novel Carbohydrate-Active Enzymes.

Science.gov (United States)

Ufarté, Lisa; Bozonnet, Sophie; Laville, Elisabeth; Cecchini, Davide A; Pizzut-Serin, Sandra; Jacquiod, Samuel; Demanèche, Sandrine; Simonet, Pascal; Franqueville, Laure; Veronese, Gabrielle Potocki

2016-01-01

Activity-based metagenomics is one of the most efficient approaches to boost the discovery of novel biocatalysts from the huge reservoir of uncultivated bacteria. In this chapter, we describe a highly generic procedure of metagenomic library construction and high-throughput screening for carbohydrate-active enzymes. Applicable to any bacterial ecosystem, it enables the swift identification of functional enzymes that are highly efficient, alone or acting in synergy, to break down polysaccharides and oligosaccharides.

The Current Status of Classroom Inclusion Activities of Secondary Agriculture Teachers

Science.gov (United States)

Hoerst, Caryn M.; Whittington, M. Susie

2009-01-01

The current status of classroom inclusion activities among agriculture teachers in comprehensive secondary agricultural education programs in Ohio is reported. The researchers describe secondary agriculture teachers' needs related to teaching learners with special needs in inclusion classes, given legislative mandates. Specifically, the…

The concept of value stream mapping to reduce of work-time waste as applied the smart construction management

Science.gov (United States)

Elizar, Suripin, Wibowo, Mochamad Agung

2017-11-01

Delays in construction sites occur due to systematic additions of time waste in various activities that are part of the construction process. Work-time waste is non-adding value activity which used to differentiate between physical construction waste found on site and other waste which occurs during the construction process. The aim of this study is identification using the concept of Value Stream Mapping (VSM) to reduce of work-time waste as applied the smart construction management.VSM analysis is a method of business process improvement. The application of VSM began in the manufacturing community. The research method base on theoretically informed case study and literature review. The data have collected using questionnaire through personal interviews from 383 respondents on construction project in Indonesia. The results show that concept of VSM can identify causes of work-time waste. Base on result of questioners and quantitative approach analysis was obtained 29 variables that influence of work-time waste or non-value-adding activities. Base on three cases of construction project founded that average 14.88% of working time was classified as waste. Finally, the concept of VSM can recommend to identification of systematic for reveal current practices and opportunities for improvement towards global challenges. The concept of value stream mapping can help optimize to reduce work-time waste and improve quality standard of construction management. The concept is also can help manager to make a decision to reduce work-time waste so as to obtain of result in more efficient for performance and sustainable construction project.

Constructing Current Singularity in a 3D Line-tied Plasma

Science.gov (United States)

Zhou, Yao; Huang, Yi-Min; Qin, Hong; Bhattacharjee, A.

2018-01-01

We revisit Parker’s conjecture of current singularity formation in 3D line-tied plasmas using a recently developed numerical method, variational integration for ideal magnetohydrodynamics in Lagrangian labeling. With the frozen-in equation built-in, the method is free of artificial reconnection, and hence it is arguably an optimal tool for studying current singularity formation. Using this method, the formation of current singularity has previously been confirmed in the Hahm–Kulsrud–Taylor problem in 2D. In this paper, we extend this problem to 3D line-tied geometry. The linear solution, which is singular in 2D, is found to be smooth for arbitrary system length. However, with finite amplitude, the linear solution can become pathological when the system is sufficiently long. The nonlinear solutions turn out to be smooth for short systems. Nonetheless, the scaling of peak current density versus system length suggests that the nonlinear solution may become singular at finite length. With the results in hand, we can neither confirm nor rule out this possibility conclusively, since we cannot obtain solutions with system length near the extrapolated critical value.

Cooperation in Construction:

DEFF Research Database (Denmark)

Vogelius, Peter; Storgaard, Kresten

2016-01-01

The study presents a building project executed by a major Danish construction company, where cooperation and its staging were essential for achieving high productivity and competitiveness. The form of this cooperation is the main theme for the article. The contractor actively changed the communic......The study presents a building project executed by a major Danish construction company, where cooperation and its staging were essential for achieving high productivity and competitiveness. The form of this cooperation is the main theme for the article. The contractor actively changed...... the companies in the case can be understood as possessing a social capital which is enforced and united by initiatives of the main contractor. The social capital was built up and maintained through the actual constitution of cooperation already in the initial phase of bidding before the building process....... The management logic of the main contractor is interpreted as based on a sociology-inspired understanding focusing on norms and social values rather than on contractual (law) and functional (engineering) logic, which had hitherto been prevalent in Danish construction management....

Problems and solutions in the field of improving control and supervision activities in the construction sector

Science.gov (United States)

Dikareva, Varvara; Mostovaya, Anna

2018-03-01

The improvement of control and supervision activities in high-rise construction is an important goal of the state. In the paper, the author considered the initiatives of the state in terms of improving the control activity. He shows the main approaches that will be applied by the state. The application of information and communication technologies in control activities is described in detail. It was noted that the quality of the regulation of various procedures remains a serious issue. At the same time, modern innovations in the field of control should take into account the increasing volumes of data and information about various economic processes.

Multi-objective genetic optimization of linear construction projects

Directory of Open Access Journals (Sweden)

Fatma A. Agrama

2012-08-01

Full Text Available In the real world, the majority cases of optimization problems, met by engineers, are composed of several conflicting objectives. This paper presents an approach for a multi-objective optimization model for scheduling linear construction projects. Linear construction projects have many identical units wherein activities repeat from one unit to another. Highway, pipeline, and tunnels are good examples that exhibit repetitive characteristics. These projects represent a large portion of the construction industry. The present model enables construction planners to generate optimal/near-optimal construction plans that minimize project duration, total work interruptions, and total number of crews. Each of these plans identifies, from a set of feasible alternatives, optimal crew synchronization for each activity and activity interruptions at each unit. This model satisfies the following aspects: (1 it is based on the line of balance technique; (2 it considers non-serial typical activities networks with finish–start relationship and both lag or overlap time between activities is allowed; (3 it utilizes a multi-objective genetic algorithms approach; (4 it is developed as a spreadsheet template that is easy to use. Details of the model with visual charts are presented. An application example is analyzed to illustrate the use of the model and demonstrate its capabilities in optimizing the scheduling of linear construction projects.

The current implementation status of the integration of sports and physical activity into Dutch rehabilitation care

NARCIS (Netherlands)

Hoekstra, Femke; Hettinga, Florentina J; Alingh, Rolinde A; Duijf, Marjo; Dekker, Rienk; van der Woude, Lucas H V; van der Schans, Cees P

PURPOSE: To describe the current status of the nationwide implementation process of a sports and physical activity stimulation programme to gain insight into how sports and physical activity were integrated into Dutch rehabilitation care. METHODS: The current implementation status of a sports and

KPMU projects. Current environmental situation and expected developments

International Nuclear Information System (INIS)

Ribarska, T.

2010-01-01

The following KPMU projects are described: Dry storage facility, which will allow the dry storage of 5256 fuel assemblies, currently stored in the spent fuel ponds of reactors of Units 3,4 and the WSF; Projects for equipment and activities related to management of liquid RAW which is already have being implemented on the site and are therefore covered in the current KNPP EIA; Ion Exchange Resin retrieval and Conditioning Equipment; Plasma melting facility; Facility for Retrieval and Processing of The Solidified Phase from Evaporator Concentrate Tanks; Control of Liquid and Gaseous Releases for the Units under Decommissioning at KNPP; Size Reduction and Decontamination Active Workshop –Design, Construction and Equipment Supply and Installation; Supply of: dismantling, size reduction and decontamination tools and equipment; Infrastructure and security perimeter separation; Heat generation plant; EIA for Decommissioning of units 1 to 4; Decay Storage Site for Transitional RAW; Site for Conventional Waste from Decommissioning; Inventory, Treatment and Conditioning of Contaminated Soils; Waste Backlog Treatment

New CMS detectors under construction at CERN

CERN Multimedia

Katarina Anthony

2012-01-01

While the LHC will play the starring role in the 2013/2014 Long Shutdown (LS1), the break will also be a chance for its experiments to upgrade their detectors. CMS will be expanding its current muon detection systems, fitting 72 new cathode strip chambers (CSC) and 144 new resistive plate chambers (RPC) to the endcaps of the detector. These new chambers are currently under construction in Building 904.   CMS engineers install side panels on a CSC detector in Building 904. "The original RPC and CSC detectors were constructed in bits and pieces around the world," says Armando Lanaro, CSC construction co-ordinator. "But for the construction of these additional chambers, we decided to unify the assembly and testing into a single facility at CERN. There, CMS technicians, engineers and physicists are taking raw materials and transforming them into installation-ready detectors.” This new facility can be found in Building 904. Once the assembly site for the strai...

Compton current detector

International Nuclear Information System (INIS)

Carvalho Campos, J.S. de.

1984-01-01

The project and construction of a Compton current detector, with cylindrical geometry using teflon as dielectric material; for electromagnetic radiation in range energy between 10 KeV and 2 MeV are described. The measurements of Compton current in teflon were obtained using an electrometer. The Compton current was promoted by photon flux proceeding from X ray sources (MG 150 Muller device) and gamma rays of 60 Co. The theory elaborated to explain the experimental results is shown. The calibration curves for accumulated charge and current in detector in function of exposition rates were obtained. (M.C.K.) [pt

Innovation in the Danish Construction Industry

DEFF Research Database (Denmark)

Bonke, Sten; Bang, Henrik; Clausen, Lennie

This report is concerned with public policy instruments, how they are used and to which degree they enhance innovativeness in the Danish construction sector.The report is written as a Danish response to the first of three thematic questions raised in CIB Task Group 35 on innovation systems...... in construction. The three themes are:A. Which current public policy instruments facilitate innovation in construction?B. What is the role of knowledge brokers in the innovation process?C. How does the client-industry interface influence innovation?...

Computer aided construction of fault tree

International Nuclear Information System (INIS)

Kovacs, Z.

1982-01-01

Computer code CAT for the automatic construction of the fault tree is briefly described. Code CAT makes possible simple modelling of components using decision tables, it accelerates the fault tree construction process, constructs fault trees of different complexity, and is capable of harmonized co-operation with programs PREPandKITT 1,2 for fault tree analysis. The efficiency of program CAT and thus the accuracy and completeness of fault trees constructed significantly depends on the compilation and sophistication of decision tables. Currently, program CAT is used in co-operation with programs PREPandKITT 1,2 in reliability analyses of nuclear power plant systems. (B.S.)

Rocket-based measurement of Birkeland currents in an active post-midnight aurora

International Nuclear Information System (INIS)

Coley, W.R.

1979-01-01

At 10:45 U.T. on March 1, 1976, an instrumented payload was launched by a Nike-Tomahawk rocket from Poker Flat, Alaska. The payload passed over auroral breakup activity that had a visual intensity of about 150 kR. An electron detector covering the 8 to 10 keV energy range observed electron precipitation while a cesium vapor vector magnetometer measured magnetic perturbations along the vehicle trajectory. From the magnetic measurements a current system consisting of horizontal electrojets and two pairs of oppositely directed field-aligned current sheets was inferred. The total current density carried by these sheets is much larger than that carried by the energetic electrons alone; hence, other particles are the primary current carriers. Data provided by the Chatanika radar facility are used along with other ground-based data to obtain electric fields conductivity estimates, and current densities, which are compared to the currents measured by the flight magnetometer. Results indicate that the ionosphere acts as an electrical load, providing the closing current for Birkeland current flow being generated out in the magnetosphere

Synchronization of construction, replenishment and leasing cycles with account of wave dynamics of innovation cycles in the construction and transport field

Science.gov (United States)

Alekseeva, Tatyana

2017-10-01

The article considers the contradictive nature of the basic cycles of the growth in construction, the core of which are construction cycles, replenishment cycles of the active part of fixed assets, innovation and investment cycles. All of the listed cycles objectively thwart the science and technology progress in construction. There are presented results of the study of finance leasing as an effective tool, that provides time reduction of the innovation replenishment cycle of the active part of fixed assets in construction. It takes into account the development and implementation terms of construction investment projects in order to timely support the innovation wave and enhance its efficiency in construction for a rapid transition of the construction investment complex and national economy to a new vector of growth.

Construction materials and Radon

International Nuclear Information System (INIS)

Paschuk, Sergei A.; Correa, Janine Nicolosi; Loriane, Fior; Schelin, Hugo R.; Pottker, Fabiana; Paula Melo, Vicente de

2008-01-01

Full text: Current studies have been performed with the aim to find the correlation of radon concentration in the air and used construction materials. At the first stage of the measurements different samples of materials used in civil construction were studied as a source of radon in the air and at the second step it was studied the radon infiltration insulation using different samples of finishing materials. For 222 Rn concentration measurements related to different construction materials as well as for the studies of radon emanation and its reduction, the sealed cell chambers, of approximately 60 x 60cm 2 , have been built using the ceramic and concrete blocks. This construction has been performed within protected and isolated laboratory environment to maintain the air humidity and temperature stable. These long term measurements have been performed using polycarbonate alpha track passive detectors. The exposure time was set about 15 days considering previous calibration performed at the Institute of Radiation Protection and Dosimetry (IRD/CNEN), where the efficiency of 70% was obtained for the density of alpha particle tracks about 13.8 cm -2 per exposure day and per kBq/m 3 of radon activity concentration. The chemical development of alpha tracks has been achieved by electrochemical etching. The track identification and counting have been done using a code based on the MATLAB Image Processing Toolbox. The cell chambers have been built following four principle steps: 1) Assembling the walls using the blocks and mortar; 2) Plaster installation; 3) Wall surface finishing using the lime; 4) Wall surface insulation by paint. Making the comparison between three layers installed at the masonry walls from concrete and ceramic blocks, it could be concluded that only wall painting with acrylic varnish attended the expectation and reduced the radon emanation flow by the factor of 2.5 approximately. Studied construction materials have been submitted the instant

New plant construction cost and schedule

International Nuclear Information System (INIS)

Akins, M. J.

2009-01-01

The presentation covers the following topics: cost structure; capital costs; variation of capital costs; trends in power plant construction; studies of costs completion; periods and risks. Nuclear plant costs have recently risen so rapidly that vendors are not willing to publicly commit to cost estimates: ∼ $2000/Kw overnight costs in 2006 in the US market > $4000/Kw and in 2008 in the US market > $6000/Kw in 2008 in emerging markets. There is vendors pricing uncertainty. Current contract models may not apply. Current construction projects have problems: Olkiluoto-3 is reported to be 50% over budget and two years behind schedule, increasing perceptions that nuclear costs will continue to increase rapidly; Price of materials is a big volatile unknown, which may decrease Labor could become more available due to limited number of new projects; Lack of debt/credit to finance new project may decrease demand of new construction

Excavation of shafts and research galleries at the Mizunami Underground Research Laboratory. Construction work of MIU part 4. Construction progress report, fiscal year 2010-2011

International Nuclear Information System (INIS)

2014-11-01

This progress report presents an outline compilation of construction activities, primary tasks performed, construction progress and safety patrol report, in fiscal year 2010-2011. The outline of construction activities is a summary based on the scope of work planned in 2010-2011: the main activities are based on the Tono Geoscience Center weekly reports; and the construction progress is based on the planned and actual schedules. The safety patrol report is based on defects recording by the safety manager of the Geoscience Facility Construction Section. Regarding the plan and actual performance of the construction work of MIU part IV (March 16, 2010 - March 15, 2012) performance carried out from April 1, 2010 until March 15, 2012 is described in this report. The attached appendices have been provided: regarding content in the excavated material bellowing the environmental standards, technical specifications of fiscal year 2010-2011 in construction work of MIU part IV, also photos of construction activities. (author)

An Approach for Measuring Reductions in Operations, Maintenance, and Energy Costs: Baseline Measures of Construction Industry Practices for the National Construction Goals.

Science.gov (United States)

Chapman, Robert E.; Rennison, Roderick

The Construction and Building Subcommittee of the National Science and Technology Council (NSTC) has established seven National Construction Goals for the construction industry and is developing baseline measures for current practices and progress with respect to each goal. This document provides a detailed set of baseline measures for the NSTC…

Current studies of biological materials using instrumental and radiochemical neutron activation analysis

International Nuclear Information System (INIS)

Fardy, J.J.; McOrist, G.D.; Farrar, Y.J.

1985-01-01

Instrumental neutron activation analysis still remains the preferred option when analysing the trace element distribution in a wide rage of materials by neutron activation analysis. However, when lower limits of detection are required or major interferences reduce the effectiveness of this technique, radiochemical neutron activation analysis is applied. This paper examines the current use of both methods and the development of rapid radiochemical techniques for analysis of the biological materials, hair, cow's milk, human's milk, milk powder, blood and blood serum

The Application of RFID Technologies in Construction

Institute of Scientific and Technical Information of China (English)

LIAN Meng

2009-01-01

RFID technologies have advanced greatly and deployed successfully in many industry sectors in recent years. Construction industry could benefit from the applications of RFID technologies but as yet has not found sufficient application areas. This project gives a comprehensive awareness of the RFID technologies, which focus on the investigation on the UK construction industry. The current status of RFID in construction and its potentials are specified in the analysis of questionnaires and case studies. Finally, basing on the investigations, some further tasks in developing RFID technologies are carried, including some recommendations, for the construction industry.

Standard forms of construction contracts in Romania

Directory of Open Access Journals (Sweden)

Cristian Bănică

2013-12-01

Full Text Available Construction industry in Romania is under pressure to modernize in order to cope with the new demands of development and convergence with EU. Contractual procedures in construction have to become an integral part in this process of modernization. The article makes an introduction to the advantages of standard forms of contract and professional contract administration in construction and presents the current state-of-the art in the use of standard construction contracts in Romania. Some practical conclusions and recommendations are presented considering the need for further contract studies.

Nuclear power project construction quality acceptance standards Implementation and discussion

International Nuclear Information System (INIS)

Lai Shifu

2013-01-01

Project quality construction acceptance is an important element of nuclear power project quality management. Based on characteristics of NPP construction and refer to national construction quality acceptance code and industry regulation, this paper introduces and discusses NPP construction quality acceptance regulation improvement and implementation under current situation. (authors)

Wearable activity monitors in oncology trials: Current use of an emerging technology.

Science.gov (United States)

Gresham, Gillian; Schrack, Jennifer; Gresham, Louise M; Shinde, Arvind M; Hendifar, Andrew E; Tuli, Richard; Rimel, B J; Figlin, Robert; Meinert, Curtis L; Piantadosi, Steven

2018-01-01

Physical activity is an important outcome in oncology trials. Physical activity is commonly assessed using self-reported questionnaires, which are limited by recall and response biases. Recent advancements in wearable technology have provided oncologists with new opportunities to obtain real-time, objective physical activity data. The purpose of this review was to describe current uses of wearable activity monitors in oncology trials. We searched Pubmed, Embase, and the Cochrane Central Register of Controlled Trials for oncology trials involving wearable activity monitors published between 2005 and 2016. We extracted details on study design, types of activity monitors used, and purpose for their use. We summarized activity monitor metrics including step counts, sleep and sedentary time, and time spent in moderate-to-vigorous activity. We identified 41 trials of which 26 (63%) involved cancer survivors (post-treatment) and 15 trials (37%) involved patients with active cancer. Most trials (65%) involved breast cancer patients. Wearable activity monitors were commonly used in exercise (54%) or behavioral (29%) trials. Cancer survivors take between 4660 and 11,000 steps/day and those undergoing treatment take 2885 to 8300steps/day. Wearable activity monitors are increasingly being used to obtain objective measures of physical activity in oncology trials. There is potential for their use to expand to evaluate and predict clinical outcomes such as survival, quality of life, and treatment tolerance in future studies. Currently, there remains a lack of standardization in the types of monitors being used and how their data are being collected, analyzed, and interpreted. Recent advancements in wearable activity monitor technology have provided oncologists with new opportunities to monitor their patients' daily activity in real-world settings. The integration of wearable activity monitors into cancer care will help increase our understanding of the associations between

Contribution of delayed rectifier potassium currents to the electrical activity of murine colonic smooth muscle

Science.gov (United States)

Koh, S D; Ward, S M; Dick, G M; Epperson, A; Bonner, H P; Sanders, K M; Horowitz, B; Kenyon, J L

1999-01-01

We used intracellular microelectrodes to record the membrane potential (Vm) of intact murine colonic smooth muscle. Electrical activity consisted of spike complexes separated by quiescent periods (Vm≈−60 mV). The spike complexes consisted of about a dozen action potentials of approximately 30 mV amplitude. Tetraethylammonium (TEA, 1–10 mM) had little effect on the quiescent periods but increased the amplitude of the action potential spikes. 4-Aminopyridine (4-AP, ⋧ 5 mM) caused continuous spiking.Voltage clamp of isolated myocytes identified delayed rectifier K+ currents that activated rapidly (time to half-maximum current, 11.5 ms at 0 mV) and inactivated in two phases (τf = 96 ms, τs = 1.5 s at 0 mV). The half-activation voltage of the permeability was −27 mV, with significant activation at −50 mV.TEA (10 mM) reduced the outward current at potentials positive to 0 mV. 4-AP (5 mM) reduced the early current but increased outward current at later times (100–500 ms) consistent with block of resting channels relieved by depolarization. 4-AP inhibited outward current at potentials negative to −20 mV, potentials where TEA had no effect.Qualitative PCR amplification of mRNA identified transcripts encoding delayed rectifier K+ channel subunits Kv1.6, Kv4.1, Kv4.2, Kv4.3 and the Kvβ1.1 subunit in murine colon myocytes. mRNA encoding Kv 1.4 was not detected.We find that TEA-sensitive delayed rectifier currents are important determinants of action potential amplitude but not rhythmicity. Delayed rectifier currents sensitive to 4-AP are important determinants of rhythmicity but not action potential amplitude. PMID:10050014

7 CFR 15b.19 - New construction.

Science.gov (United States)

2010-01-01

... 7 Agriculture 1 2010-01-01 2010-01-01 false New construction. 15b.19 Section 15b.19 Agriculture... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Accessibility § 15b.19 New construction. (a) Design and construction. Each facility or part of a facility constructed by, on behalf of, or for the use of a recipient...

Construction and operation of replacement hazardous waste handling facility at Lawrence Berkeley Laboratory. Environmental Assessment

Energy Technology Data Exchange (ETDEWEB)

1992-09-01

The US Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0423, for the construction and operation of a replacement hazardous waste handling facility (HWHF) and decontamination of the existing HWHF at Lawrence Berkeley Laboratory (LBL), Berkeley, California. The proposed facility would replace several older buildings and cargo containers currently being used for waste handling activities and consolidate the LBL`s existing waste handling activities in one location. The nature of the waste handling activities and the waste volume and characteristics would not change as a result of construction of the new facility. Based on the analysis in the EA, DOE has determined that the proposed action would not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, 42 USC. 4321 et seq. Therefore, an environmental impact statement is not required.

Current NDT activities at Cekmece Nuclear Research and Training Center

International Nuclear Information System (INIS)

Ekinci, S.

2004-01-01

Nondestructive testing (NDT) activities at Cekmece Nuclear Research and Training Center (CNAEM) has been initiated in the Industrial Application Department of the Center which was established in 1976 as the Radioisotope Applications Group for Industry. The Department started its first NDT activity with industrial radiography. The NDT activities have been developed by the support of various national (State Planning Organization (DPT)) and international (IAEA and UNDP) projects. Today, there are five basic NDT techniques (radiography, ultrasonic, magnetic particle, liquid penetrant and eddy current) used in the Industrial Application Department. The Department arranges routinely NDT qualification courses according to ISO 9712 and TS EN 473 standards for level 1 and 2 for Turkish Industry. It also carries out national DPT and IAEA Technical Co-operation projects and gives NDT services in the laboratory and in the field. Digital radiography and digital ultrasonic techniques are being used in advanced NDT applications. This paper describes the NDT activities of CNAEM. (author)

Differential contribution of Ca2+ sources to day and night BK current activation in the circadian clock.

Science.gov (United States)

Whitt, Joshua P; McNally, Beth A; Meredith, Andrea L

2018-02-05

Large conductance K + (BK) channels are expressed widely in neurons, where their activation is regulated by membrane depolarization and intracellular Ca 2+ (Ca 2+ i ). To enable this regulation, BK channels functionally couple to both voltage-gated Ca 2+ channels (VGCCs) and channels mediating Ca 2+ release from intracellular stores. However, the relationship between BK channels and their specific Ca 2+ source for particular patterns of excitability is not well understood. In neurons within the suprachiasmatic nucleus (SCN)-the brain's circadian clock-BK current, VGCC current, and Ca 2+ i are diurnally regulated, but paradoxically, BK current is greatest at night when VGCC current and Ca 2+ i are reduced. Here, to determine whether diurnal regulation of Ca 2+ is relevant for BK channel activation, we combine pharmacology with day and night patch-clamp recordings in acute slices of SCN. We find that activation of BK current depends primarily on three types of channels but that the relative contribution changes between day and night. BK current can be abrogated with nimodipine during the day but not at night, establishing that L-type Ca 2+ channels (LTCCs) are the primary daytime Ca 2+ source for BK activation. In contrast, dantrolene causes a significant decrease in BK current at night, suggesting that nighttime BK activation is driven by ryanodine receptor (RyR)-mediated Ca 2+ i release. The N- and P/Q-type Ca 2+ channel blocker ω-conotoxin MVIIC causes a smaller reduction of BK current that does not differ between day and night. Finally, inhibition of LTCCs, but not RyRs, eliminates BK inactivation, but the BK β2 subunit was not required for activation of BK current by LTCCs. These data reveal a dynamic coupling strategy between BK channels and their Ca 2+ sources in the SCN, contributing to diurnal regulation of SCN excitability. © 2018 Whitt et al.

A ground-up construction of deep learning

CERN Multimedia

CERN. Geneva

2015-01-01

I propose to give a ground up construction of deep learning as it is in it's modern state. Starting from it's beginnings in the 90's, I plan on showing the relevant (for physics) differences in optimization, construction, activation functions, initialization, and other tricks that have been accrued over the last 20 years. In addition, I plan on showing why deeper, wider basic feedforward architectures can be used. Coupling this with MaxOut layers, modern GPUs, and including both l1 and l2 forms of regularization, we have the current "state of the art" in basic feedforward networks. I plan on discussing pre-training using deep autoencoders and RBMs, and explaining why this has fallen out of favor when you have lots of labeled data. While discussing each of these points, I propose to explain why these particular characteristics are valuable for HEP. Finally, the last topic on basic feedforward networks -- interpretation. I plan on discussing latent representations of important variables (i.e., mass, pT) that ar...

Hyperpolarization-activated current (I(h)) in vestibular calyx terminals: characterization and role in shaping postsynaptic events.

Science.gov (United States)

Meredith, Frances L; Benke, Tim A; Rennie, Katherine J

2012-12-01

Calyx afferent terminals engulf the basolateral region of type I vestibular hair cells, and synaptic transmission across the vestibular type I hair cell/calyx is not well understood. Calyces express several ionic conductances, which may shape postsynaptic potentials. These include previously described tetrodotoxin-sensitive inward Na(+) currents, voltage-dependent outward K(+) currents and a K(Ca) current. Here, we characterize an inwardly rectifying conductance in gerbil semicircular canal calyx terminals (postnatal days 3-45), sensitive to voltage and to cyclic nucleotides. Using whole-cell patch clamp, we recorded from isolated calyx terminals still attached to their type I hair cells. A slowly activating, noninactivating current (I(h)) was seen with hyperpolarizing voltage steps negative to the resting potential. External Cs(+) (1-5 mM) and ZD7288 (100 μM) blocked the inward current by 97 and 83 %, respectively, confirming that I(h) was carried by hyperpolarization-activated, cyclic nucleotide gated channels. Mean half-activation voltage of I(h) was -123 mV, which shifted to -114 mV in the presence of cAMP. Activation of I(h) was well described with a third order exponential fit to the current (mean time constant of activation, τ, was 190 ms at -139 mV). Activation speeded up significantly (τ=136 and 127 ms, respectively) when intracellular cAMP and cGMP were present, suggesting that in vivo I(h) could be subject to efferent modulation via cyclic nucleotide-dependent mechanisms. In current clamp, hyperpolarizing current steps produced a time-dependent depolarizing sag followed by either a rebound afterdepolarization or an action potential. Spontaneous excitatory postsynaptic potentials (EPSPs) became larger and wider when I(h) was blocked with ZD7288. In a three-dimensional mathematical model of the calyx terminal based on Hodgkin-Huxley type ionic conductances, removal of I(h) similarly increased the EPSP, whereas cAMP slightly decreased simulated EPSP size

Data Mining Activities for Bone Discipline - Current Status

Science.gov (United States)

Sibonga, J. D.; Pietrzyk, R. A.; Johnston, S. L.; Arnaud, S. B.

2008-01-01

The disciplinary goals of the Human Research Program are broadly discussed. There is a critical need to identify gaps in the evidence that would substantiate a skeletal health risk during and after spaceflight missions. As a result, data mining activities will be engaged to gather reviews of medical data and flight analog data and to propose additional measures and specific analyses. Several studies are briefly reviewed which have topics that partially address these gaps in knowledge, including bone strength recovery with recovery of bone mass density, current renal stone formation knowledge, herniated discs, and a review of bed rest studies conducted at Ames Human Research Facility.

Construction of prototype of on-line analyzer detection system for coal on belt conveyor using neutron activation technique

International Nuclear Information System (INIS)

Rony Djokorayono; Agus Cahyono; MP Indarzah; SG Usep; Sukandar

2015-01-01

The use of on-line neutron activation technique for coal analysis is proposed as an alternative method for analysis based on sampling technique. Compared to this conventional technique, the on-line neutron activation technique has much shorter time of analysis and more accurate results. The construction of detection system prototype for the on-line analyzer is described in this paper. This on-line analyzer consists of detection system, data acquisition system, and computer console. This detection system comprises several modules, i.e. NaI(Tl) scintillation detector completed with a photomultiplier tube (PMT), pre-amplifier, single channel analyzer (SCA), and analog signal transmitter and pulse counter processor. The construction processes of these four modules include the development of configuration block, lay out, and selection of electronic components. The modules have been integrated and tested. This detection system was tested using radioactive element Zn-65 having energy of 1115.5 keV and activity of 1 μCi. The test results show that the prototype of the on-line analyzer detection system has functioned as expected. (author)

Nuclear civil construction, an essential activity dedicated to outstanding projects

International Nuclear Information System (INIS)

Herve, G.

2016-01-01

The complexity of nuclear civil construction is directly linked to the safety requirements imposed on nuclear facilities: durability in terms of time, stability, containment, tightness, managing cracking and leakages, quality controls... These requirements imply specific measures for instance the concrete that is used for the containment building has a particular composition that gives it an enhanced resistance or the substantial thickness of the foundation raft implies monitoring the temperature at which the concrete is poured. The construction of the EPR at the Flamanville site is taken as an example. This construction involves 120.000 tonnes of concrete-reinforcement steels, 400.000 m"3 of concrete, 400 km of pipes and 1600 km of cables. (A.C.)

Construction of a century solar chromosphere data set for solar activity related research

Science.gov (United States)

Lin, Ganghua; Wang, Xiao Fan; Yang, Xiao; Liu, Suo; Zhang, Mei; Wang, Haimin; Liu, Chang; Xu, Yan; Tlatov, Andrey; Demidov, Mihail; Borovik, Aleksandr; Golovko, Aleksey

2017-06-01

This article introduces our ongoing project "Construction of a Century Solar Chromosphere Data Set for Solar Activity Related Research". Solar activities are the major sources of space weather that affects human lives. Some of the serious space weather consequences, for instance, include interruption of space communication and navigation, compromising the safety of astronauts and satellites, and damaging power grids. Therefore, the solar activity research has both scientific and social impacts. The major database is built up from digitized and standardized film data obtained by several observatories around the world and covers a time span of more than 100 years. After careful calibration, we will develop feature extraction and data mining tools and provide them together with the comprehensive database for the astronomical community. Our final goal is to address several physical issues: filament behavior in solar cycles, abnormal behavior of solar cycle 24, large-scale solar eruptions, and sympathetic remote brightenings. Significant signs of progress are expected in data mining algorithms and software development, which will benefit the scientific analysis and eventually advance our understanding of solar cycles.

Construction of a century solar chromosphere data set for solar activity related research

Directory of Open Access Journals (Sweden)

Ganghua Lin

2017-06-01

Full Text Available This article introduces our ongoing project “Construction of a Century Solar Chromosphere Data Set for Solar Activity Related Research”. Solar activities are the major sources of space weather that affects human lives. Some of the serious space weather consequences, for instance, include interruption of space communication and navigation, compromising the safety of astronauts and satellites, and damaging power grids. Therefore, the solar activity research has both scientific and social impacts. The major database is built up from digitized and standardized film data obtained by several observatories around the world and covers a timespan more than 100 years. After careful calibration, we will develop feature extraction and data mining tools and provide them together with the comprehensive database for the astronomical community. Our final goal is to address several physical issues: filament behavior in solar cycles, abnormal behavior of solar cycle 24, large-scale solar eruptions, and sympathetic remote brightenings. Significant progresses are expected in data mining algorithms and software development, which will benefit the scientific analysis and eventually advance our understanding of solar cycles.

Coordination of Project and Current Activities on the Basis of the Strategy Alignment Metamodel in the Oil and Gas Company

Directory of Open Access Journals (Sweden)

R. Yu. Dashkov

2017-01-01

��s departments. This model and the Networks of Goals and Strategies of the project and current activities, which are produced on its basis, have found practical application in the realization of construction project of production line of the LNG plant (Liquefied Natural Gas and have led to effective communication between the Project office, departments and external stakeholders. Conclusions and Relevance: these studies show that the Strategy Alignment Metamodel is effective in the coordination of the project and current activities; as a result it is possible to agree the Contexts and Assumptions as well as Goals and Strategies. Forming Networks of Goals and Strategies, it is easier to monitor the activities of the departments of the company in case of their participation in the execution of the project phases and divide responsibilities between them. Application of Strategy Alignment Metamodel leads to better identification and management of risks that arise due to poor communication of the Project office with the departments of the company in delegation of works on the project Phases execution. Single database for Networks of Goals and Stretegies, Contexts and Assumptions, Goals and Strategies Alignment Matrices can serve as templates for future projects and training of the company’s project managers. 

Safety awareness educational topics for the construction of power transmission systems with smart grid technologies

Directory of Open Access Journals (Sweden)

Bryan Hubbard

2013-09-01

Full Text Available Power transmission facilities in the U.S. are undergoing a transformation due to the increased use of distributed generation sources such as wind and solar power.  The current power grid system is also antiquated and in need of substantial retrofits to make it more efficient and reliable.  The new energy transmission system being designed and built to optimize power delivery is known as “Smart Grid”.  The increased activity in the construction of power transmission facilities and installation of new technologies into the current power system raises potential safety concerns.  Existing construction management curriculum may include general information about safety training, but does not typically include information about this specialized sector.  The objective of this study was to work with industry to identify key safety topics appropriate for inclusion in an introductory industrial construction course.  Results of interviews with industry identified numerous hazards that are not typically covered in typical construction curricula.  A joint undergraduate and graduate course in industrial construction was created to address these and additional concepts. A survey of the students was performed to determine the effectiveness of the course and also to determine their thoughts about the smart grid technologies and safety training. Information on electrical system hazards is presented along with results of the student surveys.

The current implementation status of the integration of sports and physical activity into Dutch rehabilitation care.

Science.gov (United States)

Hoekstra, Femke; Hettinga, Florentina J; Alingh, Rolinde A; Duijf, Marjo; Dekker, Rienk; van der Woude, Lucas H V; van der Schans, Cees P

2017-01-01

To describe the current status of the nationwide implementation process of a sports and physical activity stimulation programme to gain insight into how sports and physical activity were integrated into Dutch rehabilitation care. The current implementation status of a sports and physical activity stimulation programme in 12 rehabilitation centres and 5 hospitals with a rehabilitation department was described by scoring fidelity and satisfaction. Seventy-one rehabilitation professionals filled out a questionnaire on how sports and physical activity, including stimulation activities, were implemented into rehabilitation care. Total fidelity scores (in %) were calculated for each organization. Professionals' satisfaction was rated on a scale from 1 to 10. In most organizations sports and physical activity were to some extent integrated during and after rehabilitation (fidelity scores: median = 54%, IQR = 23%). Physical activity stimulation was not always embedded as standard component of a rehabilitation treatment. Professionals' satisfaction rated a median value of 8.0 (IQR = 0.0) indicating high satisfaction rates. The fidelity outcome showed that activities to stimulate sports and physical activity during and after rehabilitation were integrated into rehabilitation care, but not always delivered as standardized component. These findings have emphasized the importance to focus on integrating these activities into routines of organizations. Implications for Rehabilitation Components of an evidence-based programme to stimulate sports and physical activity during and after rehabilitation can be used to measure the current status of the integration of sports and physical activity in rehabilitation care in a structural and effective way. The method described in the current study can be used to compare the content of the rehabilitation care regarding the integration of sports and physical activity among organizations both on a national and international level

Construction work management for nuclear power stations

International Nuclear Information System (INIS)

Yoshikawa, Yuichiro

1982-01-01

Nuclear power generation is positioned as the nucleus of petroleum substitution. In the Kansai Electric Power Co., efforts have been made constantly to operate its nuclear power plants in high stability and safety. At present, Kansai Electric Power Co. is constructing Units 3 and 4 in the Takahama Nuclear Power Station in Fukui Prefecture. Under the application of the management of construction works described here, both the nuclear power plants will start operation in 1985. The activities of Kansai Electric Power Co. in the area of this management are described: an outline of the construction works for nuclear power stations, the management of the construction works in nuclear power stations (the stages of design, manufacturing, installation and test operation, respectively), quality assurance activities for the construction works of nuclear power plants, important points in the construction work management (including the aspects of quality control). (J.P.N.)

Ergonomic lumbar risk analysis of construction workers by NIOSH method

Directory of Open Access Journals (Sweden)

Cinara Caetano Pereira

2015-09-01

Full Text Available Work in construction has tasks directly connected with manual transport. One of the body segments suffering greater demand in works with these characteristics is the lumbar spine segment. The aim of this study was to analyze the level of risk of lumbar construction workers in the shipment of materials. The sample was composed of 74 construction workers. Were used as a research tool: the NIOSH method for lumbar risk verification expressed by weight limit recommended (WPR and the lifting Index (IL, Visual analogue scale (VAS for the evaluation of pain intensity, the e-1 Corlett.0 for the mapping of the pain and Borg to the subjective perception of the intensity of physical exertion. The present study identified the weight limit (WP of 8.707 for management activity of bags of cement for the load of 8.194 wheelbarrows used. These findings are 6 times under actual weights handled during the activities that revolve around 50 kg with the sacks and averaged 49.72 kg stands with mass. The dimensional settings found in the search are at high risk for ergonomic lumbar region, and measures of reconfiguration of workplaces and operation of auxiliary devices for lifting, transporting and unloading are fundamental, in addition to the need for reflection about the current logistical problems that induce producers to supply the cement sacks with 50 kg.

Politica de las Construcciones Escolares (Policy for School Construction).

Science.gov (United States)

Storni, Adolfo Enrique, Ed.; And Others

This document establishes the policy for school construction programs and projects to be conducted in Argentina. The first part establishes the bases for construction and defines the policy and its objectives. The second part discusses school construction in view of educational reform and planning and considers analysis of current systems,…

A Spanish model for quantification and management of construction waste.

Science.gov (United States)

Solís-Guzmán, Jaime; Marrero, Madelyn; Montes-Delgado, Maria Victoria; Ramírez-de-Arellano, Antonio

2009-09-01

Currently, construction and demolition waste (C&D waste) is a worldwide issue that concerns not only governments but also the building actors involved in construction activity. In Spain, a new national decree has been regulating the production and management of C&D waste since February 2008. The present work describes the waste management model that has inspired this decree: the Alcores model implemented with good results in Los Alcores Community (Seville, Spain). A detailed model is also provided to estimate the volume of waste that is expected to be generated on the building site. The quantification of C&D waste volume, from the project stage, is essential for the building actors to properly plan and control its disposal. This quantification model has been developed by studying 100 dwelling projects, especially their bill of quantities, and defining three coefficients to estimate the demolished volume (CT), the wreckage volume (CR) and the packaging volume (CE). Finally, two case studies are included to illustrate the usefulness of the model to estimate C&D waste volume in both new construction and demolition projects.

A Spanish model for quantification and management of construction waste

International Nuclear Information System (INIS)

Solis-Guzman, Jaime; Marrero, Madelyn; Montes-Delgado, Maria Victoria; Ramirez-de-Arellano, Antonio

2009-01-01

Currently, construction and demolition waste (C and D waste) is a worldwide issue that concerns not only governments but also the building actors involved in construction activity. In Spain, a new national decree has been regulating the production and management of C and D waste since February 2008. The present work describes the waste management model that has inspired this decree: the Alcores model implemented with good results in Los Alcores Community (Seville, Spain). A detailed model is also provided to estimate the volume of waste that is expected to be generated on the building site. The quantification of C and D waste volume, from the project stage, is essential for the building actors to properly plan and control its disposal. This quantification model has been developed by studying 100 dwelling projects, especially their bill of quantities, and defining three coefficients to estimate the demolished volume (CT), the wreckage volume (CR) and the packaging volume (CE). Finally, two case studies are included to illustrate the usefulness of the model to estimate C and D waste volume in both new construction and demolition projects.

Writing in the workplace: Constructing documents using multiple digital sources

Directory of Open Access Journals (Sweden)

Mariëlle Leijten

2014-02-01

Full Text Available In today’s workplaces professional communication often involves constructing documents from multiple digital sources—integrating one’s own texts/graphics with ideas based on others’ text/graphics. This article presents a case study of a professional communication designer as he constructs a proposal over several days. Drawing on keystroke and interview data, we map the professional’s overall process, plot the time course of his writing/design, illustrate how he searches for content and switches among optional digital sources, and show how he modifies and reuses others’ content. The case study reveals not only that the professional (1 searches extensively through multiple sources for content and ideas but that he also (2 constructs visual content (charts, graphs, photographs as well as verbal content, and (3 manages his attention and motivation over this extended task. Since these three activities are not represented in current models of writing, we propose their addition not just to models of communication design, but also to models of writing in general.

Relation between constructs of BisBas questionnaire and some personality constructs

Directory of Open Access Journals (Sweden)

Nataša Sedlar

2008-04-01

Full Text Available The goal of this study was to examine relation between constructs relevant for Gray's neuropsychological model of motivation. According to Gray's theory, two general motivational systems underlie behavior and affect: a behavioral inhibition system (BIS and a behavioral activation system (BAS. BIS is sensitive to aversive stimuli, causes avoidance behaviors and is responsible for individual differences in anxiety. BAS is responsive to appetitive stimuli, triggers approach behavior and has been associated with individual differences in impulsivness. BIS activity has been related to the experience of negative emotions, whereas BAS activity has been associated with the experience of positive emotions. A total of 122 Slovenian students, aged 17–19 years, completed the BIS/BAS scale, the Impulsiveness-Venturesome-Empathy Scale IVE, State Trait Anxiety Inventory STAI-X2, The Positive and Negative Affect Schedule PANAS, and The Big Five Questionairre BFQ. Our results are consistent with those from recent empirical studies and provide support for Gray's theory. Measures of BIS were found to be positively related to trait anxiety and neuroticism, whereas measures of BAS were found to be positively related to impulsiveness and extraversion. Emotional component measured with PANAS did not distinguish BIS from BAS constructs. Both were found to be related to negative affect. With respect to construct validity these findings suggest that BIS/BAS scale is reasonably effective.

Towards a Competency-based Vision for Construction Safety Education

Science.gov (United States)

Pedro, Akeem; Hai Chien, Pham; Park, Chan Sik

2018-04-01

Accidents still prevail in the construction industry, resulting in injuries and fatalities all over the world. Educational programs in construction should deliver safety knowledge and skills to students who will become responsible for ensuring safe construction work environments in the future. However, there is a gap between the competencies current pedagogical approaches target, and those required for safety in practice. This study contributes to addressing this issue in three steps. Firstly, a vision for competency-based construction safety education is conceived. Building upon this, a research scheme to achieve the vision is developed, and the first step of the scheme is initiated in this study. The critical competencies required for safety education are investigated through analyses of literature, and confirmed through surveys with construction and safety management professionals. Results from the study would be useful in establishing and orienting education programs towards current industry safety needs and requirements

Construction and Demolition Waste Characteristics in Tanzania ...

African Journals Online (AJOL)

The construction industry generates a lot of construction and demolition (C&D) waste which puts some challenges to its management. For example, currently, in many towns in Tanzania, there are no landfill sites for solid waste disposal; and as a consequence open air dumping sites are used. Dumping C&D waste puts ...

Anticipated Work-Family Conflict: A Construct Investigation

Science.gov (United States)

Westring, Alyssa Friede; Ryan, Ann Marie

2011-01-01

To date, little is known about how work-family issues impact the career development process. In the current paper, we explore this issue by investigating a relatively unstudied construct: anticipated work-family conflict. We found that this construct can be represented by the same six-dimensional factor structure used to assess concurrent…

Radioactive air emissions notice of construction and application for approval to construct the Hanford Waste Vitrification Plant

International Nuclear Information System (INIS)

1992-10-01

The Hanford Site is owned by the US Government and operated by the US Department of Energy, Richland Field Office. The Hanford Site manages and produces dangerous waste and mixed waste. (containing both radioactive and dangerous components). The US Department of Energy, Richland Field Office, currently stores mixed waste, resulting from various processing operations, in underground storage tanks. The Hanford Waste Vitrification Plant will be constructed and operated to process the high-activity fraction of mixed waste stored in these underground tanks. The Hanford Waste Vitrification Plant will solidify pretreated tank waste into a glass product that will be packaged for disposal in a national repository. Emissions from the Hanford Waste Vitrification Plant will be regulated by both the federal and state Clean Air Acts. The proposed Hanford Waste Vitrification Plant represents a new source of radioactive air emissions. Construction of the plant will require approval from both federal and state agencies. The Notice of Construction and Application for Approval to Construct the Hanford Waste Vitrification Plant contains information required under Title 40 of the Code of Federal Regulations, Chapter 61; and Chapter 246-247 of the Washington Administrative Code for a proposed new source of radioactive air emissions. The document contents are based on information contained in the Hanford Waste Vitrification Plant Reference Conceptual Design Report, the Hanford Waste Vitrification Plant Preliminary Safety Analysis Report, Revision 0, and subsequent design changes made before August 1, 1992. The contents of this document may be modified to include more specific information generated during subsequent detailed design phases. Modifications will be submitted for regulatory review and approval, as appropriate

Experimental study of anti-tumor activity of direct current

International Nuclear Information System (INIS)

Ito, Hisao; Hashimoto, Shozo

1989-01-01

The anti-tumor activity of direct current combined with radiation was studied. The experiments were performed with fibrosarcomas (FSA, NFSA) syngenetic to C3H mice. Direct current (0.6mA, 120min) alone was effective to reduce the tumor sizes, but could not cure the tumors. When the direct current therapy (DC therapy) was combined with radiation the DC therapy following radiation was more effective than that before radiation. Using TCD 50 assay, the DC therapy enhanced the effect of a single dose of radiation with the dose-modifying factor of 1.2. However, tumor control rates by the combination therapy were more improved at the smaller doses of radiation than at the larger ones. When the single DC therapy (0.6mA, 120min) was applied immediately after the first radiation of fractionated one the combination therapy still showed the enhanced effect. However, both DC therapy and the radiation therapy were divided in three fractions, and the DC therapy (0.6mA, 40min) was applied after each radiation. Tumor growth retardation by the combination therapy was no different from that by radiation alone. This result suggests that there might be a minimum required dose of coulombs to show the effect of the combination therapy. (author)

Vertically oriented graphene bridging active-layer/current-collector interface for ultrahigh rate supercapacitors.

Science.gov (United States)

Bo, Zheng; Zhu, Weiguang; Ma, Wei; Wen, Zhenhai; Shuai, Xiaorui; Chen, Junhong; Yan, Jianhua; Wang, Zhihua; Cen, Kefa; Feng, Xinliang

2013-10-25

Dense networks of graphene nanosheets standing vertically on a current collector can work as numerous electrically conductive bridges to facilitate charge transport and mitigate the constriction/spreading resistance at the interface between the active material and the current collector. The vertically oriented graphene-bridged supercapacitors present excellent rate and power capabilities. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Regulatory inspection activities on nuclear power plant sites during construction in the United Kingdom

International Nuclear Information System (INIS)

Jeffery, J.V.

1977-01-01

The work of regulatory inspection of the construction of the plant on the site is performed not only by the inspector who has been allocated to inspection duties for that site but also by the specialist staff who are involved with the safety assessment of the plant. The co-ordination of this work is described in the paper and examples are given of inspection activities associated with the enforcement requirements of licence conditions as well as those related to the inspection of the plant itself. (author)

Microbial Fuel Cell Cathodes With Poly(dimethylsiloxane) Diffusion Layers Constructed around Stainless Steel Mesh Current Collectors

KAUST Repository

Zhang, Fang; Saito, Tomonori; Cheng, Shaoan; Hickner, Michael A.; Logan, Bruce E.

2010-01-01

A new and simplified approach for making cathodes for microbial fuel cells (MFCs) was developed by using metal meshcurrent collectorsandinexpensive polymer/carbon diffusion layers (DLs). Rather than adding a current collector to a cathode material such as carbon cloth, we constructed the cathode around the metal mesh itself, thereby avoiding the need for the carbon cloth or other supporting material. A base layer of poly(dimethylsiloxane) (PDMS) and carbon black was applied to the air-side of a stainless steel mesh, and Pt on carbon black with Nafion binder was applied to the solutionside as catalyst for oxygen reduction. The PDMS prevented water leakage and functioned as a DL by limiting oxygen transfer through the cathode and improving coulombic efficiency. PDMS is hydrophobic, stable, and less expensive than other DL materials, such as PTFE, that are commonly applied to air cathodes. Multiple PDMS/carbon layers were applied in order to optimize the performance of the cathode. Two PDMS/ carbon layers achieved the highest maximum power density of 1610 ± 56 mW/m 2 (normalized to cathode projected surface area; 47.0 ± 1.6 W/m3 based on liquid volume). This power output was comparable to the best result of 1635 ± 62 mW/m2 obtained using carbon cloth with three PDMS/carbon layers and a Pt catalyst. The coulombic efficiency of the mesh cathodes reached more than 80%, and was much higher than the maximum of 57% obtained with carbon cloth. These findings demonstrate that cathodes can be constructed around metal mesh materials such as stainless steel, and that an inexpensive coating of PDMS can prevent water leakage and lead to improved coulombic efficiencies. © 2010 American Chemical Society.

Microbial Fuel Cell Cathodes With Poly(dimethylsiloxane) Diffusion Layers Constructed around Stainless Steel Mesh Current Collectors

KAUST Repository

Zhang, Fang

2010-02-15

A new and simplified approach for making cathodes for microbial fuel cells (MFCs) was developed by using metal meshcurrent collectorsandinexpensive polymer/carbon diffusion layers (DLs). Rather than adding a current collector to a cathode material such as carbon cloth, we constructed the cathode around the metal mesh itself, thereby avoiding the need for the carbon cloth or other supporting material. A base layer of poly(dimethylsiloxane) (PDMS) and carbon black was applied to the air-side of a stainless steel mesh, and Pt on carbon black with Nafion binder was applied to the solutionside as catalyst for oxygen reduction. The PDMS prevented water leakage and functioned as a DL by limiting oxygen transfer through the cathode and improving coulombic efficiency. PDMS is hydrophobic, stable, and less expensive than other DL materials, such as PTFE, that are commonly applied to air cathodes. Multiple PDMS/carbon layers were applied in order to optimize the performance of the cathode. Two PDMS/ carbon layers achieved the highest maximum power density of 1610 ± 56 mW/m 2 (normalized to cathode projected surface area; 47.0 ± 1.6 W/m3 based on liquid volume). This power output was comparable to the best result of 1635 ± 62 mW/m2 obtained using carbon cloth with three PDMS/carbon layers and a Pt catalyst. The coulombic efficiency of the mesh cathodes reached more than 80%, and was much higher than the maximum of 57% obtained with carbon cloth. These findings demonstrate that cathodes can be constructed around metal mesh materials such as stainless steel, and that an inexpensive coating of PDMS can prevent water leakage and lead to improved coulombic efficiencies. © 2010 American Chemical Society.

Analysis of Housing Development Activity in Poland from 2005-2014

Directory of Open Access Journals (Sweden)

Cellmer Radosław

2016-12-01

Full Text Available The growth of both the construction market and the property market depends on various macroeconomic and legal factors, as well as on demographic, institutional, stock and local conditions. The aim of this research was to determine the spatial differentiation, dynamics and determinants of housing development activity in Poland in the context of historical and current legal conditions. This activity was measured, first of all, by the number of construction contracts and the number of completed buildings and dwelling units.

Environmental assessment for construction and operation of a Human Genome Laboratory at Lawrence Berkeley Laboratory, Berkeley, California

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-01

Lawrence Berkeley Laboratory (LBL) proposes to construct and operate a new laboratory for consolidation of current and future activities of the Human Genome Center (HGC). This document addresses the potential direct, indirect, and cumulative environmental and human-health effects from the proposed facility construction and operation. This document was prepared in accordance the National Environmental Policy Act of 1969 (United States Codes 42 USC 4321-4347) (NEPA) and the US Department of Energy`s (DOE) Final Rule for NEPA Implementing Procedures [Code of Federal Regulations 10CFR 1021].

Current Limitations and Recommendations to Improve Testing for the Environmental Assessment of Endocrine Active Substances

DEFF Research Database (Denmark)

Coady, Katherine K; Biever, Ronald C; Denslow, Nancy D

2017-01-01

In this paper existing regulatory frameworks and test systems for assessing potential endocrine-active chemicals are described, and associated challenges discussed, along with proposed approaches to address these challenges. Regulatory frameworks vary somewhat across geographies, but all basically...... evaluate whether a chemical possesses endocrine activity and whether this activity can result in adverse outcomes either to humans or the environment. Current test systems include in silico, in vitro and in vivo techniques focused on detecting potential endocrine activity, and in vivo tests that collect...... methods currently do not exist, and addressing key endocrine pathways of possible concern in addition to those associated with estrogen, androgen and thyroid signaling. This article is protected by copyright. All rights reserved....

Application of the transtheoretical model to sedentary behaviors and its association with physical activity status.

Directory of Open Access Journals (Sweden)

Ho Han

Full Text Available The Transtheoretical Model (TTM is a successful framework for guiding behavior change programs for several health behaviors, yet its application to reduce of sedentary behavior has been neglected. In addition, no data exist regarding the association between determinants of sedentary behaviors based on the TTM and physical activity behavior. The purpose of this study was to investigate college students' stages of motivational readiness to avoid sedentary behaviors and relevant psychological determinants using newly developed TTM questionnaires and to identify the association between current physical activity and sedentary behaviors based on TTM constructs.Data were obtained from 225 college students enrolled in health education and physical education courses. Participants completed a package of questionnaires including validated TTM, physical activity and sitting time questionnaires. Participants also wore an accelerometer for seven consecutive days. MANOVAs were conducted to determine mean differences in psychological constructs across the TTM stages, and Chi-square tests and Spearman correlation were used to evaluate the associations between current physical activity and sedentary behavior.A majority of the participants were in the sedentary stages, and men and women differed in proportion of individuals in the stages (78.0% vs. 68.1%, respectively. The gender difference was also found in use of the processes of change. In general, the mean scores of the TTM constructs increased as the stages progressed. No significant associations were found between the TTM constructs for sedentary behavior and current physical activity levels (p>0.05.A high proportion of college students were in sedentary stages regardless of physical activity levels, but different distributions in men and women. Participants in earlier stages were less likely to utilize the TTM constructs to reduce sedentary behaviors than those in later stages. A lack of association between

Classification of exchange currents

International Nuclear Information System (INIS)

Friar, J.L.

1983-01-01

After expansion of the vector and axial vector currents in powers of (v/c), a heretofore unremarked regularity results. Meson exchange currents can be classified into types I and II, according to the way they satisfy the constraints of special relativity. The archetypes of these two categories are the impulse approximation to the vector and axial vector currents. After a brief discussion of these constraints, the (rhoπγ) and (ωsigmaγ) exchange currents are constructed and classified, and used to illustrate a number of important points which are often overlooked

Scheme of fault tectonic and tectonic activity manifestation in the region of the Crimea nuclear power plant construction

International Nuclear Information System (INIS)

Pasynkov, A.L.

1989-01-01

Characteristic of fault tectonics and tectonic activity manifestation in the region of the Crimea nuclear power plant construction is presented. Mosaic-block structure of the area, predetermined by the development of diagonal systems of activated tectonic dislocations with different displacement amplitudes and different stratigraphic ranges of manifestation, was established. Strained-stressed state of the region is determined by the presence of the South-Azov zone of deep fault and Krasnogorsk-Samarlinks fault system. The presented scheme can be used as tectonic basis of seismogenic activity of the region

Diode-Assisted Buck-Boost Current Source Inverters

DEFF Research Database (Denmark)

Gao, F.; Cai, Liang; Loh, P.C.

2007-01-01

This paper presents a couple of novel current source inverters (CSIs) with the enhanced current buckboost capability. With the unique diode-inductor network added between current source inverter circuitry and current boost elements, the proposed buck-boost current source inverters demonstrate...... uninfluenced. Lastly, all theoretical findings were verified experimentally using constructed laboratory prototypes....

Modern methods of cost saving of the production activity in construction

Science.gov (United States)

Silka, Dmitriy

2017-10-01

Every time economy faces recession, cost saving questions acquire increased urgency. This article shows how companies of the construction industry have switched to the new kind of economic relations over recent years. It is specified that the dominant type of economic relations does not allow to quickly reorient on the necessary tools in accordance with new requirements of economic activity. Successful experience in the new environment becomes demanded. Cost saving methods, which were proven in other industries, are offered for achievement of efficiency and competitiveness of the companies. Analysis is performed on the example of the retail sphere, which, according to the authoritative analytical reviews, is extremely innovative on both local and world economic levels. At that, methods, based on the modern unprecedentedly high opportunities of communications and informational exchange took special place among offered methods.

STIMULATION OF CONSTRUCTION OF AFFORDABLE HOUSING BY REFORMATION OF A CONSTRUCTION COMPLEX MANAGEMENT SYSTEM

Directory of Open Access Journals (Sweden)

BRONEVYTSKYI S. P.

2015-10-01

Full Text Available Purpose. Development of offers on stimulation of construction of affordable housing by reformation of a construction complex management system. Methodology. The revelation of the problems of planning of construction in large cities. The analysis of forming of structure of a build complex management in soviet times and in a transitional period. The revelation of the modern, actual, socio-economic problems of the construction activity management. Proposition on the improvement of methods of construction management in cities of Ukraine. Results. The methods of a construction complex management in countries with a market economy as for building of affordable housing are shown. Originality. In composition of a town-planning documentations, except for the norms of the common use of territories of city (density of population of micro region, the maximum parameters of a construction examining of land areas are proposed to determine: building percent and coefficient of maximum superficial area. Practical value. The principle of management and organization of construction is norms of a build use of territories for building of mass affordable housing for funds of population and investors while providing of the comfort of housing in accordance with state construction norms.

Optimising material procurement for construction waste minimization: An exploration of success factors

OpenAIRE

Ajayi, SO; Oyedele, LO; Akinade, OO; Bilal, M; Alaka, HA; Owolabi, HA

2017-01-01

Although construction waste occurs during the actual construction activities, there is an understanding that it is caused by activities and actions at design, materials procurement and construction stages of project delivery processes. This study investigates the material procurement and logistics measures for mitigating waste generated by construction activities. In a bid to explore the phenomenon from the perspectives of experts from the construction industry, this study used a combination ...

European Technological Effort in Preparation of ITER Construction

International Nuclear Information System (INIS)

Andreani, Roberto

2005-01-01

Europe has started since the '80s with the preparatory work done on NET, the Next European Torus, the successor of JET, to prepare for the construction of the next generation experiment on the road to the fusion reactor. In 2000 the European Fusion Development Agreement (EFDA) has been signed by sixteen countries, including Switzerland, not a member of the Union. Now the signatory countries have increased to twenty-five. A vigorous programme of design and R and D in support of ITER construction has been conducted by EFDA through the coordinated effort of the national institutes and laboratories supported financially, in the framework of the VI European Framework Research Programme (2002-2006), by contracts of association with EURATOM. In the last three years, with the expenditure of 160 M[Euro], the accent has been particularly put on the preparation of the industrial manufacturing activities of components and systems for ITER. Prototypes and manufacturing methods have been developed in all the main critical areas of machine construction with the objective of providing sound and effective solutions: vacuum vessel, toroidal field coils, poloidal field coils, remote handling equipment, plasma facing components and divertor components, electrical power supplies, generators and power supplies for the Heating and Current Drive Systems and other minor subsystems.Europe feels to be ready to host the ITER site and to provide adequate support and guidance for the success of construction to our partners in the ITER collaboration, wherever needed

Portmanteau constructions, phrase structure and linearization

Directory of Open Access Journals (Sweden)

Brian Hok-Shing Chan

2015-12-01

Full Text Available In bilingual code-switching which involves language-pairs with contrasting head-complement orders (i.e. head-initial vs head-final, a head may be lexicalized from both languages with its complement sandwiched in the middle. These so-called portmanteau sentences (Nishimura, 1985, 1986; Sankoff, Poplack, and Vanniarajan, 1990, etc. have been attested for decades, but they had never received a systematic, formal analysis in terms of current syntactic theory before a few recent attempts (Hicks, 2010, 2012. Notwithstanding this lack of attention, these structures are in fact highly relevant to theories of linearization and phrase structure. More specifically, they challenge binary-branching (Kayne, 1994, 2004, 2005 as well as the Antisymmetry hypothesis (ibid.. Not explained by current grammatical models of code-switching, including the Equivalence Constraint (Poplack, 1980, the Matrix Language Frame Model (Myers-Scotton, 1993, 2002, etc., and the Bilingual Speech Model (Muysken, 2000, 2013, the portmanteau construction indeed looks uncommon or abnormal, defying any systematic account. However, the recurrence of these structures in various datasets and constraints on them do call for an explanation. This paper suggests an account which lies with syntax and also with the psycholinguistics of bilingualism. Assuming that linearization is a process at the Sensori-Motor (SM interface (Chomsky, 2005; 2013, this paper sees that word order is not fixed in a syntactic tree but it is set in the production process, and much information of word order rests in the processor, for instance, outputting a head before its complement (i.e. head-initial word order or the reverse (i.e. head-final word order. As for the portmanteau construction, it is the output of bilingual speakers co-activating two sets of head-complement orders which summon the phonetic forms of the same word in both languages. Under this proposal, the underlying structure of a portmanteau

Portmanteau Constructions, Phrase Structure, and Linearization.

Science.gov (United States)

Chan, Brian Hok-Shing

2015-01-01

In bilingual code-switching which involves language-pairs with contrasting head-complement orders (i.e., head-initial vs. head-final), a head may be lexicalized from both languages with its complement sandwiched in the middle. These so-called "portmanteau" sentences (Nishimura, 1985, 1986; Sankoff et al., 1990, etc.) have been attested for decades, but they had never received a systematic, formal analysis in terms of current syntactic theory before a few recent attempts (Hicks, 2010, 2012). Notwithstanding this lack of attention, these structures are in fact highly relevant to theories of linearization and phrase structure. More specifically, they challenge binary-branching (Kayne, 1994, 2004, 2005) as well as the Antisymmetry hypothesis (ibid.). Not explained by current grammatical models of code-switching, including the Equivalence Constraint (Poplack, 1980), the Matrix Language Frame Model (Myers-Scotton, 1993, 2002, etc.), and the Bilingual Speech Model (Muysken, 2000, 2013), the portmanteau construction indeed looks uncommon or abnormal, defying any systematic account. However, the recurrence of these structures in various datasets and constraints on them do call for an explanation. This paper suggests an account which lies with syntax and also with the psycholinguistics of bilingualism. Assuming that linearization is a process at the Sensori-Motor (SM) interface (Chomsky, 2005, 2013), this paper sees that word order is not fixed in a syntactic tree but it is set in the production process, and much information of word order rests in the processor, for instance, outputting a head before its complement (i.e., head-initial word order) or the reverse (i.e., head-final word order). As for the portmanteau construction, it is the output of bilingual speakers co-activating two sets of head-complement orders which summon the phonetic forms of the same word in both languages. Under this proposal, the underlying structure of a portmanteau construction is as simple as an

75 FR 77617 - Taking of Marine Mammals Incidental to Specified Activities; Construction of the East Span of the...

Science.gov (United States)

2010-12-13

... functions, such as orientation, communication, finding prey, and avoiding predators, marine mammals that... Marine Mammals Incidental to Specified Activities; Construction of the East Span of the San Francisco... California. Pursuant to the Marine Mammal Protection Act (MMPA), NMFS is requesting comments on its proposal...

Waste diminution in Construction projects: Environmental Predicaments

Science.gov (United States)

Gharehbaghi, Koorosh; Scott-Young, Christina

2018-03-01

Waste diminution in construction projects is not only a behavioural issue, but also an energy consumption and reduction concern. With construction waste equating to the significant amount of exhausted energy together with increased pollution, this contributes to a series of environmental predicaments. The overall goal of construction solid Waste Management is to collect, treat and dispose of solid wastes generated by project activities in an environmentally and socially satisfactory manner, using the most economical means available. As cities expand, their construction activities and consumption patterns further drive up the solid waste quantities. Governments are usually authorized to have responsibility for providing solid Waste Management services, and various administrative laws give them exclusive ownership over the waste produced. In addition, construction waste processing can be further controlled and minimized according to specialized authorities such as Environmental Protection Agencies (EPA) and their relevant acts and regulations. Moreover, a Construction Environmental Management Plan (CEMP) can further control the treatment of waste and therefore, reduce the amount produced. Key elements of a CEMP not only include complying with relevant legislation, standards and guidance from the EPA; however, also to ensuring that there are systems in place to resolve any potential problems associated with site activities. Accordingly, as a part of energy consumption and lessening strategies, this paper will discuss various effective waste reduction methods for construction projects. Finally, this paper will also examine tactics to further improve energy efficiency through innovative construction Waste Management strategies (including desirability rating of most favourable options) to promote the lessening of overall CO2production.

Construction progress of the cooling & ventilation in the LHC project

CERN Document Server

Body, Y; Josa, F; Monsted, A; Pirollet, B; CERN. Geneva. ST Division

2002-01-01

After the LEP dismantling Phase the Cooling and Ventilation Group has started the LHC construction work. Year 2001 through to 2004 will certainly be the most important period of activity for the CV group in the erection phase The author will report on the current works that are in progress on the different LHC Points distinguishing between the Ventilation and the Water Cooling installations. The Ventilation work completed in the new surface buildings in Points 1, 4,5,6 and 8. The work for the Cooling plants comprehend to the pumping stations, the cooling towers and the chilled water production stations in Points 1 and 5, For all of these activities, an updated report of the progress the work, the planning and of the expenses are given. Finally, a brief overview of the future activities is presented.

Novel dimeric bis(7)-tacrine proton-dependently inhibits NMDA-activated currents

International Nuclear Information System (INIS)

Luo, Jialie; Li, Wenming; Liu, Yuwei; Zhang, Wei; Fu, Hongjun; Lee, Nelson T.K.; Yu, Hua; Pang, Yuanping; Huang, Pingbo; Xia, Jun; Li, Zhi-Wang; Li, Chaoying; Han, Yifan

2007-01-01

Bis(7)-tacrine has been shown to prevent glutamate-induced neuronal apoptosis by blocking NMDA receptors. However, the characteristics of the inhibition have not been fully elucidated. In this study, we further characterize the features of bis(7)-tacrine inhibition of NMDA-activated current in cultured rat hippocampal neurons. The results show that with the increase of extracellular pH, the inhibitory effect decreases dramatically. At pH 8.0, the concentration-response curve of bis(7)-tacrine is shifted rightwards with the IC 50 value increased from 0.19 ± 0.03 μM to 0.41 ± 0.04 μM. In addition, bis(7)-tacrine shifts the proton inhibition curve rightwards. Furthermore, the inhibitory effect of bis(7)-tacrine is not altered by the presence of the NMDA receptor proton sensor shield spermidine. These results indicate that bis(7)-tacrine inhibits NMDA-activated current in a pH-dependent manner by sensitizing NMDA receptors to proton inhibition, rendering it potentially beneficial therapeutic effects under acidic conditions associated with stroke and ischemia

The effect of physical activity on mood - a review of current literature

Directory of Open Access Journals (Sweden)

Mateusz Łakomski

2017-04-01

Full Text Available The impact of physical activity on human health has many benefits. Equally important in improving physical fitness and normalizing cardiovascular system seems to be the impact of exercise on mood of patients. Physical activity improves well-being, satisfaction and self-confidence. However, the condition of effective therapeutic intervention is due to its regularity, since only systematic exercises allow to maintain the beneficial effects of physical activity. Otherwise, the results achieved are only temporary. This article aims to review the current literature and show the most important aspects of motion therapy in improving the psychophysical condition of patients.

Methodical ecologization principles in construction management

OpenAIRE

Nuzhina Irina Pavlovna; Yudakhina Olga Borisovna

2015-01-01

In the article the subject of ecologization of construction sector is presented, the necessity of ecologization technology and technological processes is proved. The article also presents principles of ecologically friendly management of construction and investment activities and describes these principles in detail.

Psychosocial constructs and postintervention changes in physical activity and dietary outcomes in a lifestyle intervention, HUB City Steps, 2010

Science.gov (United States)

Purpose: To examine relationships among psychosocial constructs (PSC) of behavior change and post-intervention changes in physical activity (PA) and dietary outcomes. Design: Non-controlled, pre- post-experimental intervention. Setting: Midsized, southern United States city. Subjects: 269 prima...

Current training initiatives at Nuclear Electric plc

International Nuclear Information System (INIS)

Fowler, C.D.

1993-01-01

Nuclear Electric, one of the three generating companies to emerge from the demise of the U.K.'s Central Electricity Generating Board (CEGB), owns and operates the commercial nuclear power stations in England and Wales. The U.K. government proscribed further construction beyond Sizewell B, the United Kingdom's first pressurized water reactor (PWR) station, pending the outcome of a review of the future of nuclear power to be held in 1994. The major challenges facing Nuclear Electric at its formation in 1990 were therefore to demonstrate that nuclear power is safe, economical, and environmentally acceptable and to complete the PWR station under construction on time and within budget. A significant number of activities were started that were designed to increase output, reduce costs, and ensure that the previous excellent safety standards were maintained. A major activity was to reduce the numbers of staff employed, with a recognition from the outset that this reduction could only be achieved with a significant human resource development program. Future company staff would have to be competent in more areas and more productive. This paper summarizes some of the initiatives currently being pursued throughout the company and the progress toward ensuring that staff with the required competences are available to commission and operate the Sizewell B program in 1994

St. Laurent Construction Co., Inc. Information Sheet

Science.gov (United States)

St. Laurent Construction Co., Inc. (the Company) is located in Nashua, New Hampshire. The settlement involves renovation activities conducted at properties constructed prior to 1978, located in Merrimack and Nashua, New Hampshire.

Supply chain for new construction: buy where we build

International Nuclear Information System (INIS)

Cruz, J. L.; Bueno, S.

2012-01-01

A global supply strategy has been placed by Westinghouse in order to face the current and future constructions. And in this way, Westinghouse will be able to take advantage of benefit of Local Supply. this article shows the Westinghouse Global Supply Strategy, Local Supply considerations, the current state of supplier calcifications, and finally Memorandums of Understanding and Alliances agreed with local suppliers around the world to provide a suitable solution for the new construction needs. (Author)

Risk pricing practices in finance, insurance and construction

OpenAIRE

Laryea, Samuel

2008-01-01

A review of current risk pricing practices in the financial, insurance and construction sectors is conducted through a comprehensive literature review. The purpose was to inform a study on risk and price in the tendering processes of contractors: specifically, how contractors take account of risk when they are calculating their bids for construction work. The reference to mainstream literature was in view of construction management research as a field of application rather than a fundamental ...

THE INFLUENCE OF LIQUIDITY ON PROFITABILITY OF POLISH CONSTRUCTION SECTOR COMPANIES

Directory of Open Access Journals (Sweden)

Monika Bolek

2012-04-01

Full Text Available The concept of financial liquidity is not very straight, as it has various aspects, although generally it refers to the current assets and liabilities management. Financial liquidity together with profitability are the core categories of enterprise activities which, in order to function efficiently, the company should treat as equally important. The growth of financial liquidity may negatively influence the company profitability. If the company is to liquid in the static sense than it will affect negatively the profitability since some capital will be frozen in current assets. In this article, the authors analyze theoretical aspects of the relation between liquidity and profitability, whereas the empirical part they examine this interdependence on a group of construction sector companies listed on Warsaw Stock Exchange.

Feeding activity of mussels Mytilus edulis related to near-bed currents and phytoplankton biomass

DEFF Research Database (Denmark)

Dolmer, Per

2000-01-01

The feeding activity of blue mussels Mytilus edulis was investigated in the field and related to near-bottom current velocities and the phytoplankton biomass in the near-bottom water layers for four days. The body content of Chl-a in mussels and their shell gap size were used as indices of filtra......The feeding activity of blue mussels Mytilus edulis was investigated in the field and related to near-bottom current velocities and the phytoplankton biomass in the near-bottom water layers for four days. The body content of Chl-a in mussels and their shell gap size were used as indices...... of filtration activity. During days 1 and 2 the near-bed current velocities were low (1.2-2.1 cm s(-1)), and the near-bed phytoplankton biomass was at the same time lower than near the water surface. Between 44 and 69% of the mussels had closed shells and accumulated only small amounts of Chl-a in the body....... During day 3 and day 4 the near-bed current velocities increased to 6.5 and 3.9 cm s(-1). respectively, and the Chl-a was homogeneously distributed in the water column. Now only 17 and 25% of the mussels had closed valves and they accumulated a larger amount of Chl-a. The actual population filtration...

76 FR 7156 - Taking of Marine Mammals Incidental to Specified Activities; Construction of the East Span of the...

Science.gov (United States)

2011-02-09

... whale. If no marine mammals are seen by the observer in that time it would be assumed that the animal... of marine animals sighted; (7) Direction of travel; (8) Environmental information associated with... Marine Mammals Incidental to Specified Activities; Construction of the East Span of the San Francisco...

The effect of flexible acrylic resin on masticatory muscle activity in implant-supported mandibular overdentures: a controlled clinical trial

OpenAIRE

Ibraheem, Eman Mostafa Ahmed; Nassani, Mohammad Zakaria

2016-01-01

Background It is not yet clear from the current literature to what extent masticatory muscle activity is affected by the use of flexible acrylic resin in the construction of implant-supported mandibular overdentures. Objective To compare masticatory muscle activity between patients who were provided with implant-supported mandibular overdentures constructed from flexible acrylic resin and those who were provided with implant-supported mandibular overdentures constructed from heat-cured conven...

Tank Operations Contract Construction Management Methodology. Utilizing The Agency Method Of Construction Management To Safely And Effectively Complete Nuclear Construction Work

International Nuclear Information System (INIS)

Leso, K.F.; Hamilton, H.M.; Farner, M.; Heath, T.

2010-01-01

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small

TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT TO SAFELY AND EFFECTIVELY COMPLETE NUCLEAR CONSTRUCTION WORK

Energy Technology Data Exchange (ETDEWEB)

LESO KF; HAMILTON HM; FARNER M; HEATH T

2010-01-14

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small

Extra-terrestrial construction processes - Advancements, opportunities and challenges

Science.gov (United States)

Lim, Sungwoo; Prabhu, Vibha Levin; Anand, Mahesh; Taylor, Lawrence A.

2017-10-01

Government space agencies, including NASA and ESA, are conducting preliminary studies on building alternative space-habitat systems for deep-space exploration. Such studies include development of advanced technologies for planetary surface exploration, including an in-depth understanding of the use of local resources. Currently, NASA plans to land humans on Mars in the 2030s. Similarly, other space agencies from Europe (ESA), Canada (CSA), Russia (Roscosmos), India (ISRO), Japan (JAXA) and China (CNSA) have already initiated or announced their plans for launching a series of lunar missions over the next decade, ranging from orbiters, landers and rovers for extended stays on the lunar surface. As the Space Odyssey is one of humanity's oldest dreams, there has been a series of research works for establishing temporary or permanent settlement on other planetary bodies, including the Moon and Mars. This paper reviews current projects developing extra-terrestrial construction, broadly categorised as: (i) ISRU-based construction materials; (ii) fabrication methods; and (iii) construction processes. It also discusses four categories of challenges to developing an appropriate construction process: (i) lunar simulants; (ii) material fabrication and curing; (iii) microwave-sintering based fabrication; and (iv) fully autonomous and scaled-up construction processes.

Giving patients responsibility or fostering mutual response-ability: family physicians' constructions of effective chronic illness management.

Science.gov (United States)

Thille, Patricia H; Russell, Grant M

2010-10-01

Current visions of family medicine and models of chronic illness management integrate evidence-based medicine with collaborative, patient-centered care, despite critiques that these constructs conflict with each other. With this potential conflict in mind, we applied a critical discursive psychology methodology to present discursive patterns articulated by 13 family physicians in Ontario, Canada, regarding care of patients living with multiple chronic illnesses. Physicians constructed competing versions of the terms "effective chronic illness management" and "patient involvement." One construction integrated individual responsibility for health with primacy of "evidence," resulting in a conceptualization consistent with paternalistic care. The second constructed effective care as involving active partnership of physician and patient, implying a need to foster the ability of both practitioners and patients to respond to complex challenges as they arose. The former pattern is inconsistent with visions of family medicine and chronic illness management, whereas the latter embodies it.

Constructions of Roles in Studio Teaching and Learning

Science.gov (United States)

Belluigi, Dina Zoe

2016-01-01

Various constructions of supervisors and students emerge from education literature on art, design and architecture studio pedagogy. Constructions of the supervisor within the studio and during assessment are considered, with a discussion of the threads which underpin them. This is followed by a discussion of some of the current dominant…

Construction safety program for the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-06-26

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF.

Construction safety program for the National Ignition Facility

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF

Solid construction waste management in large civil construction companies through use of specific software - case study

Directory of Open Access Journals (Sweden)

Caio Dalla Zanna

2017-05-01

Full Text Available In the current construction market there is a high demand for sustainability. In addition to that the Brazilian government is enacting tougher and tougher legislation on the disposal of solid construction waste. These demands increasingly make the construction company responsible for the entire lifecycle of its waste as well as the accompanying cost and environmental impact of solid waste. A software program was used in the research which allows construction companies gather information about waste. This helps the decision makers, at all different levels of the company improving waste management through better decisions. The software program was used during the construction of two residential buildings, constructed by a large construction company in the South of Brazil. Five key performance indicators were used by the construction company team: Generated Waste Height (cm, cost per built area (R$ m-², Waste Segregation Quality Index (WSQI, Effective Waste Management Index (EWMI and Waste Management Quality Index (WMQI. After four months the total cost of waste management was R$ 83,551.71 for site A and R$ 91,668.02 for site B. About 70% of the waste was raw material waste. The software program provided information not previously available, which made it possible to calculate the cost of material loss, indicating corrective actions, all without losing sight of cost reduction opportunities for the management of Solid construction Waste (SCW.

THE EVOLUTION OF THE ELECTRIC CURRENT DURING THE FORMATION AND ERUPTION OF ACTIVE-REGION FILAMENTS

Energy Technology Data Exchange (ETDEWEB)

Wang, Jincheng; Yan, Xiaoli; Qu, Zhongquan; Xue, Zhike; Xiang, Yongyuan; Li, Hao, E-mail: egnever@ynao.ac.cn [Yunnan Observatories, Chinese Academy of Sciences, Kunming 650011 (China)

2016-02-01

We present a comprehensive study of the electric current related to the formation and eruption of active region filaments in NOAA AR 11884. The vertical current on the solar surface was investigated by using vector magnetograms (VMs) observed by HMI on board the Solar Dynamics Observatory. To obtain the electric current along the filament's axis, we reconstructed the magnetic fields above the photosphere by using nonlinear force-free field extrapolation based on photospheric VMs. Spatio-temporal evolutions of the vertical current on the photospheric surface and the horizontal current along the filament's axis were studied during the long-term evolution and eruption-related period, respectively. The results show that the vertical currents of the entire active region behaved with a decreasing trend and the magnetic fields also kept decreasing during the long-term evolution. For the eruption-related evolution, the mean transverse field strengths decreased before two eruptions and increased sharply after two eruptions in the vicinity of the polarity inversion lines underneath the filament. The related vertical current showed different behaviors in two of the eruptions. On the other hand, a very interesting feature was found: opposite horizontal currents with respect to the current of the filament's axis appeared and increased under the filament before the eruptions and disappeared after the eruptions. We suggest that these opposite currents were carried by the new flux emerging from the photosphere bottom and might be the trigger mechanism for these filament eruptions.

Calcium current activation kinetics in isolated pyramidal neurones of the Ca1 region of the mature guinea-pig hippocampus.

Science.gov (United States)

Kay, A R; Wong, R K

1987-11-01

1. Neurones were isolated from the CA1 region of the guinea-pig hippocampus and subjected to the whole-cell mode of voltage clamping, to determine the kinetics of voltage-gated Ca2+ channel activation. 2. Isolated neurones had an abbreviated morphology, having lost most of the distal dendritic tree during the isolation procedure. The electrical compactness of the cells facilitates voltage clamp analysis. 3. Block of sodium and potassium currents revealed a persistent current activated on depolarization above -40 mV, which inactivated slowly when the intracellular medium contained EGTA. The current was blocked by Co2+ and Cd2+, augmented by increases in Ca2+ and could be carried by Ba2+, suggesting that the current is borne by Ca2+. 4. Steady-state activation of the Ca2+ current was found to be well described by the Boltzman equation raised to the second power. 5. The open channel's current-voltage (I-V) relationship rectified in the inward direction and was consistent with the constant-field equation. 6. The kinetics of Ca2+ current onset followed m2 kinetics throughout the range of its activation. Tail current kinetics were in accord with this model. A detailed Hodgkin-Huxley model was derived, defining the activation of this current. 7. The kinetics of the currents observed in this regionally and morphologically defined class of neurones were consistent with the existence of a single kinetic class of channels.

Radio Astronomy in Malaysia: Current Status and Outreach Activities

Science.gov (United States)

Hashim, N.; Abidin, Z. Z.; Ibrahim, U. F. S. U.; Umar, R.; Hassan, M. S. R.; Rosli, Z.; Hamidi, Z. S.; Ibrahim, Z. A.

2011-12-01

In this paper, we will present the current status of radio astronomical research and outreach in Malaysia. We will also present a short history of our research group, which is currently the only radio astronomical facility in Malaysia. Our group is called the Radio Cosmology Research Lab and was established in 2005 by Dr Zamri Zainal Abidin and Prof Dr Zainol Abidin Ibrahim. We will discuss the future plans for this group including our keen interest in being part of a more global network of radio astronomers. We are already an active member of the South-East Asia Astronomy Network (SEAAN) and aims to have a radio astronomical facility in order to join the Global Very Long Baseline Interferometer (VLBI) as well becoming a research hub for the future Square Kilometer Array (SKA) project. We will also present some of the scientific goals of our group including providing a platform for radio astronomers to be able to do observations of weak and high red-shifted radio objects such as galaxy clusters and supernovae.

LHCb: Detector Module Design, Construction and Performance for the LHCb SciFi Tracker

CERN Multimedia

Ekelhof, R

2014-01-01

The Scintillating Fibre (SciFi) Tracker for the LHCb Upgrade (CERN/LHCC 2014-001; LHCb TDR 15) is based on 2.5 m long multi-layered ribbons from 10,000 km of scintillating fibre over 12 planes covering 350 m2. The planes are separated into modular detectors, each with cooled silicon photomultiplier (SiPM) arrays for photo-readout. In this talk, we will present the construction and performance of this novel detector, including the intricacies of scintillating fibre ribbon production, constructing precision detector planes with a rigid and light module design, and the integration of the readout components for this detector. The complexities and issues regarding this active part of the SciFi Tracker will be emphasised along with the current solutions and measured performances.

Beyond Design: The Importance of Construction and Post-Construction Phases in Green Developments

Directory of Open Access Journals (Sweden)

Mark Hostetler

2010-04-01

Full Text Available Green developments are becoming a popular land use planning concept that attempts to accommodate growth while minimizing impacts on natural resources. Various policies encourage conservation designs that usually translate into the clustering of homes and the conservation of some percentage of open space. However, the success of a design is determined by what happens during the construction and post-construction phases of a subdivision project. These two phases are often ignored in land use planning and given only minimal attention by built environment professionals. As a result, green developments may not be functioning as originally intended. This essay discusses the importance of construction and post-construction and a way forward to create functional, sustainable communities. Construction activities and decisions, such as impacts from earthwork machines, improper protection of conserved open spaces and trees, the choice of plants used for yards and common areas, and the storage of construction material all can lead to severe impacts on natural areas both within and surrounding a development site. During post-construction, a variety of improper management practices by homeowners can compromise the sustainability of a development. Developers and associated environmental consultant teams could implement approaches that would engage contractors and residents, such as environmental construction covenants and the installment of a neighborhood, environmental education program. To increase the adoption of relevant construction and post-construction practices, appropriate policies need to be created. However, the shift will only occur once the planning and built environment community acknowledges that design is only the first step towards sustainability. Academic design studios and continuing education courses can help with this culture shift by including construction and post-construction considerations within their curriculum.

Identification and Characterization of Particulate Matter Concentrations at Construction Jobsites

Directory of Open Access Journals (Sweden)

Ingrid P. S. Araújo

2014-11-01

Full Text Available The identification and characterization of particulate matter (PM concentrations from construction site activities pose major challenges due to the diverse characteristics related to different aspects, such as concentration, particle size and particle composition. Moreover, the characterization of particulate matter is influenced by meteorological conditions, including temperature, humidity, rainfall and wind speed. This paper is part of a broader investigation that aims to develop a methodology for assessing the environmental impacts caused by the PM emissions that arise from construction activities. The objective of this paper is to identify and characterize the PM emissions on a construction site with different aerodynamic diameters (PM2.5, PM10, total suspended particulates (TSP, based on an exploratory study. Initially, a protocol was developed to standardize the construction site selection criteria, laboratory procedures, field sample collection and laboratory analysis. This protocol was applied on a multifamily residential building construction site during three different construction phases (earthworks, superstructure and finishings aimed at measuring and monitoring PM concentrations arising from construction activities. The particulate matter was characterized in different particle sizes. Results showed that the higher TSP emissions arising from construction activities provoked environmental impacts. Some limitations to the results were identified, especially with regards the need for a detailed investigation about the influence of different construction phases on PM emissions. The findings provided significant knowledge about various situations, serving as a basis for improving the existing methodology for particulate material collection on construction sites and the development of future studies on the specific construction site phases.

Current Research Status of KHNP for Site Risk

Energy Technology Data Exchange (ETDEWEB)

Oh, Kyemin; Jeon, Ho-Jun; Bahng, Ki-In; Na, Jang-Hwan [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

In Korea, by the geographical characteristics, many Nuclear Power Plants (NPPs) have been constructed and operated at a single site. This is above average level or number of plants per site in the world. For this reason, the public concerns for the safety of nuclear facilities increased after Fukushima Daiichi accident. As a result, comprehensive risk assessment and management for the site which have multi-unit NPPs were strongly asked. Currently, to solve it, many researches and projects has carried out by various Korean companies, research centers, and regulatory authorities. In this paper, R and D plans of KHNP for multi-unit risk were summarized. Firstly, the needs of multi-unit PSA were reviewed. R and D activities and plans of KHNP were summarized in the last part. In this paper, we summarized the R and D plans of KHNP for assessing the multi-unit risk. Currently, multi-unit risk or multi-unit PSA are important and practical issues in both nuclear industry and national energy policy. After Fukushima accident, several countries stopped the construction and the operation of NPPs, other countries which is maintaining the NPPs are being strongly asked to assess the risk for multi-unit NPPs at the same site. Because of Korean geographical characteristics, the number of NPPs which are above average level or number of plants per site in the world is being constructed and operated at a single site. The population density nearby each site is considered to be higher than that of other countries.

Current Research Status of KHNP for Site Risk

International Nuclear Information System (INIS)

Oh, Kyemin; Jeon, Ho-Jun; Bahng, Ki-In; Na, Jang-Hwan

2016-01-01

In Korea, by the geographical characteristics, many Nuclear Power Plants (NPPs) have been constructed and operated at a single site. This is above average level or number of plants per site in the world. For this reason, the public concerns for the safety of nuclear facilities increased after Fukushima Daiichi accident. As a result, comprehensive risk assessment and management for the site which have multi-unit NPPs were strongly asked. Currently, to solve it, many researches and projects has carried out by various Korean companies, research centers, and regulatory authorities. In this paper, R and D plans of KHNP for multi-unit risk were summarized. Firstly, the needs of multi-unit PSA were reviewed. R and D activities and plans of KHNP were summarized in the last part. In this paper, we summarized the R and D plans of KHNP for assessing the multi-unit risk. Currently, multi-unit risk or multi-unit PSA are important and practical issues in both nuclear industry and national energy policy. After Fukushima accident, several countries stopped the construction and the operation of NPPs, other countries which is maintaining the NPPs are being strongly asked to assess the risk for multi-unit NPPs at the same site. Because of Korean geographical characteristics, the number of NPPs which are above average level or number of plants per site in the world is being constructed and operated at a single site. The population density nearby each site is considered to be higher than that of other countries

BOOK REVIEW: The Current Comparator

Science.gov (United States)

Petersons, Oskars

1989-01-01

dc use are covered in earlier chapters. In relation to the number of dc vs ac instruments in use, the length of this chapter presents something of an imbalance. Nevertheless, in the limited number of pages, the authors have covered the principal direct-current comparator applications—the ratio device (dc comparator), the resistance bridge, and the potentiometer. More specialized instruments such as the differential voltmeter and the digital-to-analog converter are also mentioned. The unique feature of the dc comparator is the modulator-type balance detector. It is covered in Chapter 3 with current-comparator construction details. In conclusion, the technical depth and style of discussion, the material covered, the size of the volume, and the ample references suggest that the authors should satisfy most of the audience interested in current comparators. A possible exception might be those interested in extremely high accuracies (errors in the 10-8 to 10-9 range). The authors have selected the overall approach of presentation that is predominantly pragmatic rather than analytical. Metrologists unfamiliar with current comparators should be able, after a day's reading, to embark upon the construction of their own devices or upon the application of current comparators to their own measurement needs. The serious practioner will find the book valuable for the complete coverage of the subject and the bibliography. Also, most practitioners should find in the book a number of useful design, construction, or application tricks for their own use. At the present time, development activity on transformer-type ratio devices, including the current comparator, has subsided in comparison with the peak level of the sixties. For many applications, however, these devices remain the most accurate and sometimes the only viable instruments for scaling current and voltage. The applications include factory test systems and instruments for absolute electrical measurements. This situation is

Recognition of Values-Based Constructs in a Summer Physical Activity Program.

Science.gov (United States)

Watson, Doris L.; Newton, Maria; Kim, Mi-Sook

2003-01-01

Examined the extent to which participants in a summer sports camp embraced values-based constructs, noting the relationship between perceptions of values-based constructs and affect and attitude. Data on ethnically diverse 10-13-year-olds indicated that care for others/goal setting, self-responsibility, and self-control/respect positively related…

Na(+)/K(+) pump interacts with the h-current to control bursting activity in central pattern generator neurons of leeches.

Science.gov (United States)

Kueh, Daniel; Barnett, William H; Cymbalyuk, Gennady S; Calabrese, Ronald L

2016-09-02

The dynamics of different ionic currents shape the bursting activity of neurons and networks that control motor output. Despite being ubiquitous in all animal cells, the contribution of the Na(+)/K(+) pump current to such bursting activity has not been well studied. We used monensin, a Na(+)/H(+) antiporter, to examine the role of the pump on the bursting activity of oscillator heart interneurons in leeches. When we stimulated the pump with monensin, the period of these neurons decreased significantly, an effect that was prevented or reversed when the h-current was blocked by Cs(+). The decreased period could also occur if the pump was inhibited with strophanthidin or K(+)-free saline. Our monensin results were reproduced in model, which explains the pump's contributions to bursting activity based on Na(+) dynamics. Our results indicate that a dynamically oscillating pump current that interacts with the h-current can regulate the bursting activity of neurons and networks.

Economic assessment of the construction industry: A construction-economics nexus

Science.gov (United States)

Barber, Herbert Marion, Jr.

, infrastructure spending may, or may not, be an answer to the current world economic collapse, as much more research remains to be completed by researchers to address known ambiguities within various associated findings. Until a collective agreement can be reached among researchers as to the effect that construction spending has on economic output under known, specific parameters, policy-makers should exercise extreme caution when leveraging infrastructure spending as a solution for overcoming the world economic collapse.

Towards improving construction labor productivity and projects’ performance

Directory of Open Access Journals (Sweden)

Mostafa E. Shehata

2011-12-01

Full Text Available Proper management of resources in construction projects can yield substantial savings in time and cost. As construction is a labor-intensive industry, this paper focuses on labor productivity in the construction industry. This study considers the current state-of-the-art issues relevant to this subject. It covers the construction labor productivity definitions, aspects, measurements, factors affecting it, different techniques used for measuring it and modeling techniques. The main outcome from the literature is that there is no standard definition of productivity. This study provides a guide for necessary steps required to improve construction labor productivity and consequently, the project performance. It can help improve the overall performance of construction projects through the implementation of the concept of benchmarks. Also, it gives an up to date concept of loss of productivity measurement for construction productivity claims. Two major case studies, from the literature, are presented to show construction labor productivity rates, factors affecting construction labor productivity and how to improve it.

Niche construction game cancer cells play.

Science.gov (United States)

Bergman, Aviv; Gligorijevic, Bojana

2015-10-01

Niche construction concept was originally defined in evolutionary biology as the continuous interplay between natural selection via environmental conditions and the modification of these conditions by the organism itself. Processes unraveling during cancer metastasis include construction of niches, which cancer cells use towards more efficient survival, transport into new environments and preparation of the remote sites for their arrival. Many elegant experiments were done lately illustrating, for example, the premetastatic niche construction, but there is practically no mathematical modeling done which would apply the niche construction framework. To create models useful for understanding niche construction role in cancer progression, we argue that a) genetic, b) phenotypic and c) ecological levels are to be included. While the model proposed here is phenomenological in its current form, it can be converted into a predictive outcome model via experimental measurement of the model parameters. Here we give an overview of an experimentally formulated problem in cancer metastasis and propose how niche construction framework can be utilized and broadened to model it. Other life science disciplines, such as host-parasite coevolution, may also benefit from niche construction framework adaptation, to satisfy growing need for theoretical considerations of data collected by experimental biology.

Niche construction game cancer cells play

Science.gov (United States)

Bergman, Aviv; Gligorijevic, Bojana

2015-10-01

Niche construction concept was originally defined in evolutionary biology as the continuous interplay between natural selection via environmental conditions and the modification of these conditions by the organism itself. Processes unraveling during cancer metastasis include construction of niches, which cancer cells use towards more efficient survival, transport into new environments and preparation of the remote sites for their arrival. Many elegant experiments were done lately illustrating, for example, the premetastatic niche construction, but there is practically no mathematical modeling done which would apply the niche construction framework. To create models useful for understanding niche construction role in cancer progression, we argue that a) genetic, b) phenotypic and c) ecological levels are to be included. While the model proposed here is phenomenological in its current form, it can be converted into a predictive outcome model via experimental measurement of the model parameters. Here we give an overview of an experimentally formulated problem in cancer metastasis and propose how niche construction framework can be utilized and broadened to model it. Other life science disciplines, such as host-parasite coevolution, may also benefit from niche construction framework adaptation, to satisfy growing need for theoretical considerations of data collected by experimental biology.

Socio-Economic Problems of the Russian Construction of Art Nouveau Period (on the Example of A.I. Lishnevsky’s Activity

Directory of Open Access Journals (Sweden)

Aleksandr I. Chepel

2017-09-01

Full Text Available The author studies the specifics of Russian architect’s work on the example of the activity of prominent architect of Art Nouveau period A.L. Lishnevsky (1868–1942. The special attention is paid to the architect’s relations with the authorities, contractors and workers, as well as with customers and colleagues. The author shows the opinion of citizens about the activities of an architect as a builder and businessman, reveals the main socio-economic problems which the architect faced from the moment of inception and approval of the project prior to its actual implementation. The author attempts to trace the mechanism of professional networking in the architecture environment of that time, and to reveal the peculiarities of private architectural bureaus (“offices”. The attention is paid to the assessment by the architect of their own professional activity. A.L. Lishnevsky’s activity is a good example of architect’s work in the construction business. A native of the city of Kherson, he received the metropolitan education at the Art Academy, then for over six years (1895–1901 he worked as a municipal architect in Elisavetgrad (Kirovograd, since 2016 – Kropivnytsky during the period of rapid economic and cultural growth of the town. After 1901 and up to 1917 he was actively engaged in municipal and private construction in the capital of the Russian Empire, Saint Petersburg. The relevance of the topic is determined by the fact that the Art Nouveau period architect worked in capitalism construction market, and was forced to deal with issues similar to those that the architects of our time solve. The study is based on materials from Russian archives and periodicals of late 19th – early 20th century.

Discussion on mass concrete construction of wind turbine generator foundation

Science.gov (United States)

Shang, Liang; Wu, Chaoxiang; Yin, Xiaoyong

2018-04-01

Wind power is one of the main power sources currently. China has rich wind power resources, wind power plants are developed faster and faster. However, China wind power construction started late, which is lack of relevant experience technology. It is easy to produce quality problems. The key to the construction quality of wind power plant is the construction quality of mass concrete construction. Therefore, construction technology and quality control of wind turbine generator foundation mass concrete are discussed and analyzed in the paper.

Uranium exploration in Egypt past, current and future activities

International Nuclear Information System (INIS)

Farag, N.

2014-01-01

The Egyptian Nuclear Materials Authority (NMA), is the government body responsible for exploration of the nuclear raw materials in the country. The early NMA U-exploration activities has included training of exploration teams, conduction of airborne, ground follow up and preliminary geological mapping as well as execution of limited exploration drilling. A number of TC projects and expert missions were mainly executed in collaboration with the IAEA for this purpose. These efforts have resulted in the discovery of seven U-potential prospects. NMA has also exercised limited heap leaching on experimental scale and obtained small amounts of U-concentrates, utilized for R & D purposes. However, the exploration activities remained in the preliminary phases and did not succeed to reach either reliable evaluation of the discovered uranium resources or running productive U-exploitation. By the end of the last decade, Egypt has declared the intention to adopt a peaceful program for electric power generation; this implied NMA to implement a twofold plan as described hereafter. Regarding the conventional U-resources, occurring in the Eastern Desert, NMA focus the exploration activities on the younger granites of Pan African type, and the associated inter-mountain basins. The activities will be restricted to the evaluation of U-reserves in at least three of the most promising uranium prospects that still require extensive exploration drilling programs. NMA is now implementing an international bid announcement seeking for partnership of an experienced international firm, to assess the uranium resources in these sites, in addition to receiving relevant IAEA/TC programs. Regarding non-conventional resources, the black sand project is mainly a resource of a titanium and zirconium minerals; however, NMA is now trying to process monazite to obtain mainly Th and minor U by-products. NMA has successfully completed an exploration study and. the Government of Egypt has recently

Construction Professionals Job Performance and Characteristics: A Comparison of Indigenous and Expatriate Construction Companies in Nigeria

Directory of Open Access Journals (Sweden)

Henry Ndubuisi Onukwube

2011-06-01

Job performance is considered one of the most important constructs in human resources management because it helps to explain the value and utility that each employee adds to the organisation. The professionals in the Nigerian construction companies are not exception to the perceived low job performance rate within the industry. Extant literature points to the fact that job characteristics of employees can account for variance in their job performance rate.This study compares the job performance rate and job characteristics of construction professionals in indigenous and expatriate construction companies with a view to establish a relationship between job performance and job characteristics of construction professionals. A total of 762 questionnaires were collected and used for the study.  Eighty one (81 construction companies, 50 (62% indigenous and 31 (38% expatriate were selected using stratified random sampling technique. Data collected were analysed using mean item score, spearman rank correlation, linear regression analysis where appropriate. Findings of the study revealed that the relationship between job characteristics and job performance of construction professionals in construction companies in Nigeria is positive but low and the correlation coefficient is higher in expatriate construction companies. Based on the above finding, the study recommends that construction companies in Nigeria should endeavour and improve on their current core job dimensions (task significance, skill variety, task identity, autonomy and feedback inherent in various jobs designed within their respective organizations as this will constitute as one of the variants that will improve the job performance rate of construction professionals.

A Metabolic Biofuel Cell: Conversion of Human Leukocyte Metabolic Activity to Electrical Currents

Directory of Open Access Journals (Sweden)

Cui X Tracy

2011-05-01

Full Text Available Abstract An investigation of the electrochemical activity of human white blood cells (WBC for biofuel cell (BFC applications is described. WBCs isolated from whole human blood were suspended in PBS and introduced into the anode compartment of a proton exchange membrane (PEM fuel cell. The cathode compartment contained a 50 mM potassium ferricyanide solution. Average current densities between 0.9 and 1.6 μA cm-2 and open circuit potentials (Voc between 83 and 102 mV were obtained, which were both higher than control values. Cyclic voltammetry was used to investigate the electrochemical activity of the activated WBCs in an attempt to elucidate the mechanism of electron transfer between the cells and electrode. Voltammograms were obtained for the WBCs, including peripheral blood mononuclear cells (PBMCs - a lymphocyte-monocyte mixture isolated on a Ficoll gradient, a B lymphoblastoid cell line (BLCL, and two leukemia cell lines, namely K562 and Jurkat. An oxidation peak at about 363 mV vs. SCE for the PMA (phorbol ester activated primary cells, with a notable absence of a reduction peak was observed. Oxidation peaks were not observed for the BLCL, K562 or Jurkat cell lines. HPLC confirmed the release of serotonin (5-HT from the PMA activated primary cells. It is believed that serotonin, among other biochemical species released by the activated cells, contributes to the observed BFC currents.

Construction and equipment requirements for installations and laboratories handling unsealed radioactive materials in low and medium activity - Proposal of an Israeli standard

Energy Technology Data Exchange (ETDEWEB)

Ben-Shlomo, A; Schlesinger, T; Barshad, M [Soreq Nuclear Research Center, Yavne (Israel)

1993-10-01

Working with unsealed radioactive materials involves risks of internal or external exposure to ionizing radiation. Exposure of human beings to ionizing radiation involves adverse health effects and must be prevented or at least reduced to reasonable levels. Radiation sources in this work are unsealed radioactive materials, that may be solids, liquid or in gaseous states, and in varying toxic levels. Various works and actions that are performed on the unsealed radioactive materials have varying potentials of dispersion, contamination and exposure, so that the combination of the type of work activity, isotope characteristics and physical state dictate the internal and external exposure risks. In order to limit the exposure of the personnel of installations and laboratories which deals with unsealed radioactive materials, national and international authorities and organizations standards and procedures for the requirements of construction and equipment of such installations and laboratories. This document means to be a proposal for an Israeli standard requirements for equipment and construction of installations working with low and medium activity unsealed radioactive materials. The targets for defining the, construction and equipment, requirements are: a. Safety and proper protection of personnel and public from external and internal exposure while the work is done properly. Proper protection against the risk of contaminating the environment. c. Standardization of requirements. d. Proper design of installations and laboratories. e. Supply means for evaluation and reduction of construction costs.The equipment detailed here refers to fixed (none movable) equipment which is a part of the construction of the laboratory or installation, unless specified otherwise. The document starts with a review of the recommendations of some international organizations (WHO, IAEA, NRPB) for construction and equipment requirements for these laboratories and installations. Then the

Real economic activity and accounting information in Spanish construction and real estate firms

Directory of Open Access Journals (Sweden)

Juan Carlos Navarro-García

2016-01-01

Full Text Available The aim of this work is to determine whether the accounting information provided by construction and real estate firms in Spain reflects the real economic activity, during upswings and downturns. A relationship is found between economic conditions and financial reporting in a continental European country such as Spain. Although there is a relationship between real housing price growth and financial accounting measures, real estate companies seem to show an artificial position, since they only present a relationship with Return on Assets (ROA based on low quality income (accruals. Therefore, a different financial position influences a different behaviour in these two similar sectors. In fact, some signs alerting of possible risk in real estate firms are shown.

Intracellular Ca(2+) release from endoplasmic reticulum regulates slow wave currents and pacemaker activity of interstitial cells of Cajal.

Science.gov (United States)

Zhu, Mei Hong; Sung, Tae Sik; O'Driscoll, Kate; Koh, Sang Don; Sanders, Kenton M

2015-04-15

Interstitial cells of Cajal (ICC) provide pacemaker activity in gastrointestinal muscles that underlies segmental and peristaltic contractions. ICC generate electrical slow waves that are due to large-amplitude inward currents resulting from anoctamin 1 (ANO1) channels, which are Ca(2+)-activated Cl(-) channels. We investigated the hypothesis that the Ca(2+) responsible for the stochastic activation of ANO1 channels during spontaneous transient inward currents (STICs) and synchronized activation of ANO1 channels during slow wave currents comes from intracellular Ca(2+) stores. ICC, obtained from the small intestine of Kit(+/copGFP) mice, were studied under voltage and current clamp to determine the effects of blocking Ca(2+) uptake into stores and release of Ca(2+) via inositol 1,4,5-trisphosphate (IP3)-dependent and ryanodine-sensitive channels. Cyclocpiazonic acid, thapsigargin, 2-APB, and xestospongin C inhibited STICs and slow wave currents. Ryanodine and tetracaine also inhibited STICs and slow wave currents. Store-active compounds had no direct effects on ANO1 channels expressed in human embryonic kidney-293 cells. Under current clamp, store-active drugs caused significant depolarization of ICC and reduced spontaneous transient depolarizations (STDs). After block of ryanodine receptors with ryanodine and tetracaine, repolarization did not restore STDs. ANO1 expressed in ICC has limited access to cytoplasmic Ca(2+) concentration, suggesting that pacemaker activity depends on Ca(2+) dynamics in restricted microdomains. Our data from studies of isolated ICC differ somewhat from studies on intact muscles and suggest that release of Ca(2+) from both IP3 and ryanodine receptors is important in generating pacemaker activity in ICC. Copyright © 2015 the American Physiological Society.

Intracellular Ca2+ release from endoplasmic reticulum regulates slow wave currents and pacemaker activity of interstitial cells of Cajal

Science.gov (United States)

Zhu, Mei Hong; Sung, Tae Sik; O'Driscoll, Kate; Koh, Sang Don

2015-01-01

Interstitial cells of Cajal (ICC) provide pacemaker activity in gastrointestinal muscles that underlies segmental and peristaltic contractions. ICC generate electrical slow waves that are due to large-amplitude inward currents resulting from anoctamin 1 (ANO1) channels, which are Ca2+-activated Cl− channels. We investigated the hypothesis that the Ca2+ responsible for the stochastic activation of ANO1 channels during spontaneous transient inward currents (STICs) and synchronized activation of ANO1 channels during slow wave currents comes from intracellular Ca2+ stores. ICC, obtained from the small intestine of Kit+/copGFP mice, were studied under voltage and current clamp to determine the effects of blocking Ca2+ uptake into stores and release of Ca2+ via inositol 1,4,5-trisphosphate (IP3)-dependent and ryanodine-sensitive channels. Cyclocpiazonic acid, thapsigargin, 2-APB, and xestospongin C inhibited STICs and slow wave currents. Ryanodine and tetracaine also inhibited STICs and slow wave currents. Store-active compounds had no direct effects on ANO1 channels expressed in human embryonic kidney-293 cells. Under current clamp, store-active drugs caused significant depolarization of ICC and reduced spontaneous transient depolarizations (STDs). After block of ryanodine receptors with ryanodine and tetracaine, repolarization did not restore STDs. ANO1 expressed in ICC has limited access to cytoplasmic Ca2+ concentration, suggesting that pacemaker activity depends on Ca2+ dynamics in restricted microdomains. Our data from studies of isolated ICC differ somewhat from studies on intact muscles and suggest that release of Ca2+ from both IP3 and ryanodine receptors is important in generating pacemaker activity in ICC. PMID:25631870

Tank Operations Contract Construction Management Methodology. Utilizing The Agency Method Of Construction Management

International Nuclear Information System (INIS)

Lesko, K.F.; Berriochoa, M.V.

2010-01-01

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, 'Management of Construction Projects, A Constructor's Perspective', University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted

TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT

Energy Technology Data Exchange (ETDEWEB)

LESKO KF; BERRIOCHOA MV

2010-02-26

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, "Management of Construction Projects, A Constructor's Perspective", University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are

Study on Evaluation Index System of Green mine construction

Science.gov (United States)

Li, xin; Yang, JunJie; Yan, Hongcai; Cao, Hongjun

2017-11-01

Green mine is a new and science comprehensive construction mode of mine, which runs the concept of green development through the whole process of mineral resources development and utilization, promotes the transformation and upgrading of mineral enterprises and achieves the healthy and sustainable development of mining industry. This paper is based on “the basic conditions of national green mine”, combined with the current situation of green mine construction, constructing green mine construction evaluation index system which is divided into five areas, including management, comprehensive utilization of mineral resources. technological innovation. ecological environment and cultural construction.

Process evaluation of a multifaceted health program aiming to improve physical activity levels and dietary patterns among construction workers

NARCIS (Netherlands)

Viester, L.; Verhagen, E.A.L.M.; Bongers, P.M.; Beek, A.J. van der

2014-01-01

Objective: To evaluate the process of a health promotion program, aiming to improve physical activity levels and diet among construction workers. Methods: The process evaluation was conducted after the RE-AIM framework for the evaluation of the public health impact of health promotion interventions.

Unit soil loss rate from various construction sites during a storm.

Science.gov (United States)

Maniquiz, Marla C; Lee, Soyoung; Lee, Eunju; Kong, Dong-Soo; Kim, Lee-Hyung

2009-01-01

The Korean Ministry of Environment (MOE) opts to establish an ordinance having a standard specifying an allowable soil loss rate applicable to construction projects. The predicted amount of soil loss from a construction site exceeding the standard can be used to calculate the percent reduction necessary to comply with the ordinance. This research was conducted to provide a basis to establish a standard by investigating the unit soil loss rates in the three phases of development: pre-construction, active construction and post construction based from 1,036 Environmental Impact Assessment (EIA) reports within the six-year period (2000-2005). Based on the findings, several factors affect the magnitude of soil loss rates particularly storm characteristics, site slope, soil type, location from rivers, as well as the type of construction activity. In general, the unit soil loss rates during the active construction phase are extremely higher in comparison to undisturbed areas; in magnitude of 7 to 80 times larger in urban areas and 18 to 585 times in rural areas. Only between 20 to 40 percent of the soil loss rates was contributed at pre- and post- construction phases indicating that the active construction phase is the most important phase to control.

Current state of the construction of an integrated test facility for hydrogen risk

Energy Technology Data Exchange (ETDEWEB)

Na, Young Su; Hong, Seong-Ho; Hong, Seong-Wan [KAERI, Daejeon (Korea, Republic of)

2015-05-15

Experimental research on hydrogen as a combustible gas is important for an assessment of the integrity of a containment building under a severe accident. The Korea Atomic Energy Research Institute (KAERI) is preparing a large-scaled test facility, called SPARC (SPray-Aerosol-Recombiner-Combustion), to estimate the hydrogen behavior such as the distribution, combustion and mitigation. This paper introduces the experimental research activity on hydrogen risk, which was presented at International Congress on Advances in Nuclear Power Plants (ICAPP) this year. The KAERI is preparing a test facility, called SPARC (SPray-Aerosol-Recombiner-Combustion test facility), for an assessment of the hydrogen risk. In the SPARC, hydrogen behavior such as mixing with steam and air, distribution, and combustion in the containment atmosphere will be observed. The SPARC consists of a pressure vessel with a 9.5 m height and 3.4 m in diameter and the operating system to control the thermal hydraulic conditions up to 1.5 MPa at 453 K in a vessel. The temperature, pressure, and gas concentration at various locations will be measured to estimate the atmospheric behavior in a vessel. To install the SPARC, an experimental building, called LIFE (Laboratory for Innovative mitigation of threats from Fission products and Explosion), was constructed at the KAERI site. LIFE has an area of 480 m''2 and height of 18.6 m, and it was designed by considering the experimental safety and specification of a large-sized test facility.

Current UNSCEAR Activities

International Nuclear Information System (INIS)

Mohamed, G.

2010-01-01

UNSCEAR stands for United Nation Scientific Committee of Effects of Atomic Radiation. It has been in service for 55 years. It reports to the General Assembly. Its role is to assess global levels and effects of ionizing radiation and to provide scientific basis UNSCEAR in Africa: Egypt joined UNSCEAR in 1955 while Sudan joined in 1973. UNSCEAR in IRPA-11: Norman Gentner (Canada), the Scientific Secretary from 2001- 2005 gave a presentation about UNSCEAR. It was in Madrid, Spain 2004 UNSCEAR in second IRPA Africa’S Congress: This was in Egypt 2007. Abel Gonzalez (Argentina) who is a Member of UNSCEAR gave two presentations. i.e. a refresher course (UNSCEAR ) and a general lecture about UNSCEAR activities UNSCEAR in IRPA-12: Was held in 2008 and Malcolm Crick (UNSCEAR Scientific secretary) from 2005 gave a lecture entitled „Epistemology of radiation protection status of levels and effects of ionizing radiation.. UNSCEAR at IRPA Egypt workshop was held in Egypt January 2010 and Gomaa presented Malcolm Crick lecture to IRPA-12 to the participants of IRPA Egypt workshop January 2010. UNSCEAR Latest publications: Among the publications are:- UNSCEAR 2006 Report: E ffects of ionizing radiation” 5 UNSCEAR 2008 Report: S ources and effects of ionizing radiation”. The 57 Session of UNSCEAR activities: a. The activities included reporting to the General Assembly on three levels. Part -1: Report on session deliberations Part-2: Scientific Report: Summary of low-dose radiation effects on health Part-3: Response to paragraph 13 of resolution 64/85 b. There were also discussions on some documents which included: -Assessment of levels of radiation from electrical energy production -Uncertainty in radiation risk estimation - Health effects attributable to radiation exposure -Methodology for estimating exposures due to discharges -Summary of radiation effects on health -Improving data collection, analysis and dissemination At the end of the lecture, there was an invitation

The use of concrete-filled steel structures for modular construction of advanced reactors

International Nuclear Information System (INIS)

Braverman, J.; Morante, R.; Hofmayer, C.; Graves, H.

1997-01-01

Modular construction techniques have been successfully used in a number of industries, both domestically and internationally. Recently, the use of structural modules has been proposed for advanced nuclear power plants. This paper presents the results of a research program which evaluated the use of modular construction for safety-related structures in advanced nuclear power plant designs. The research program included review of current modular construction technology, development of licensing review criteria for modular construction, and initial validation of currently available analytical techniques applied to concrete-filled steel structural modules

Active Construction of Profession-Related Events: The Priming Effect among Pre-service Teachers with Different Professional Identity.

Science.gov (United States)

Wang, Xin-Qiang; Zhu, Jun-Cheng; Liu, Lu; Chen, Xiang-Yu; Huo, Jun-Yu

2018-01-01

Pre-service teachers with different professional identity may actively construct different subjective profession-related events based on the same objective profession-related events. To explore the priming effect among pre-service teachers with different professional identity, this study examined the effect of positive, negative, or neutral priming sentences in an individualized narration of profession-related events through a priming paradigm. Forty-two female volunteers were asked to complete positive, negative, and neutral priming sentences describing profession-related events. The results showed that, relative to those with weak professional identity, participants with strong professional identity generated a higher number of positive items when primed with different stimuli and displayed greater positive priming bias for positive and neutral stimuli. In addition, relative to those with strong professional identity, participants with weak professional identity generated a higher number of neutral and negative items when primed with positive and negative stimuli, respectively, and displayed greater negative priming bias toward negative stimuli. These results indicate that pre-service teachers with strong professional identity were likely to have established positive self-schemas involving profession-related events, which facilitated active, positive construction of such events.

Active Construction of Profession-Related Events: The Priming Effect among Pre-service Teachers with Different Professional Identity

Directory of Open Access Journals (Sweden)

Xin-qiang Wang

2018-02-01

Full Text Available Pre-service teachers with different professional identity may actively construct different subjective profession-related events based on the same objective profession-related events. To explore the priming effect among pre-service teachers with different professional identity, this study examined the effect of positive, negative, or neutral priming sentences in an individualized narration of profession-related events through a priming paradigm. Forty-two female volunteers were asked to complete positive, negative, and neutral priming sentences describing profession-related events. The results showed that, relative to those with weak professional identity, participants with strong professional identity generated a higher number of positive items when primed with different stimuli and displayed greater positive priming bias for positive and neutral stimuli. In addition, relative to those with strong professional identity, participants with weak professional identity generated a higher number of neutral and negative items when primed with positive and negative stimuli, respectively, and displayed greater negative priming bias toward negative stimuli. These results indicate that pre-service teachers with strong professional identity were likely to have established positive self-schemas involving profession-related events, which facilitated active, positive construction of such events.