WorldWideScience

Sample records for cu cadmium cd

  1. Effects of rice straw on the speciation of cadmium (Cd) and copper (Cu) in soils

    NARCIS (Netherlands)

    Cui, Y.S.; Du, X.; Weng, L.P.; Zhu, Y.G.

    2008-01-01

    Four soils were collected from different sites of China in Lechang (LC, Guangdong province), Changsha (CS, Hunan province), Jiaxing UX, Zhejiang province) and Hangzhou (HZ, Zhejiang province), and were spiked with Cu (50 mg kg(-1)) and Cd (5 mg kg(-1)). The effects of rice straw addition (6%) on the

  2. Concentrations of metals and potential metal-binding compounds and speciation of Cd, Zn and Cu in phloem and xylem saps from castor bean plants (Ricinus communis) treated with four levels of cadmium.

    Science.gov (United States)

    Hazama, Kenji; Nagata, Shinji; Fujimori, Tamaki; Yanagisawa, Shuichi; Yoneyama, Tadakatsu

    2015-06-01

    We examined the concentrations of metals (Cd, Zn, Cu, Fe and Mn) and potential metal-binding compounds [nicotianamine (NA), thiol compounds and citrate] in xylem and phloem saps from 4-week-old castor bean plants (Ricinus communis) treated with 0 (control), 0.1, 1.0, and 10 μM Cd for 3 weeks. Treatment with 0.1 and 1 μM Cd produced no visible damage, while 10 μM Cd retarded growth. Cadmium concentrations in both saps were higher than those in the culture solution at 0.1 μM, similar at 1.0 μM and lower at 10 μM. Cd at 10 μM reduced Cu and Fe concentrations in both saps. NA concentrations measured by capillary electrophoresis-mass spectrometry (MS) in xylem sap (20 μM) were higher than the Cu concentrations, and those in phloem sap (150 μM) were higher than those of Zn, Fe and Cu combined. Reduced glutathione concentrations differed in xylem and phloem saps (1-2 and 30-150 μM, respectively), but oxidized glutathione concentrations were similar. Phloem sap phytochelatin 2 concentration increased from 0.8 μM in controls to 8 μM in 10 μM Cd. Free citrate was 2-4 μM in xylem sap and 70-100 μM in phloem sap. Total bound forms of Cd in phloem and xylem saps from 1 μM Cd-treated plants were 54 and 8%, respectively. Treatment of phloem sap with proteinaseK reduced high-molecular compounds while increasing fractions of low-molecular Cd-thiol complexes. Zinc-NA, Fe-NA and Cu-NA were identified in the phloem sap fraction of control plants by electrospray ionization time-of-flight MS, and the xylem sap contained Cu-NA.

  3. Cadmium effect on structural properties of Cu{sub 2}Zn{sub 1-x}Cd{sub x}SnS{sub 4} quinternary alloys nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Ibraheam, A. S.; Al-Douri, Y., E-mail: yaldouri@yahoo.com; Hashim, U. [Institute of Nano Electronic Engineering, University Malaysia Perlis, 01000 Kangar, Perlis (Malaysia)

    2016-07-06

    The study report novel sensing plat of extended quinternart materials, Cu{sub 2}Zn{sub 1-x}d{sub x}SnS{sub 4} quinternary alloy nanostructures were fabricated onto oxidized silicon substrate by sol-gel method and characterized were synthesized by X-ray diffraction (XRD). The XRD peaks were shifted towered the lower angle side with increasing cadmium content. The practical size average of the Cu{sub 2}Zn{sub 1-x}d{sub x}SnS{sub 4} quinternary alloy nanostructures between 34.55 to 63.30 nm.

  4. Effects of warming on uptake and translocation of cadmium (Cd) and copper (Cu) in a contaminated soil-rice system under Free Air Temperature Increase (FATI).

    Science.gov (United States)

    Ge, Li-Qiang; Cang, Long; Liu, Hui; Zhou, Dong-Mei

    2016-07-01

    Global warming has received growing attentions about its potential threats to human in recent, however little is known about its effects on transfer of heavy metals in agro-ecosystem, especially for Cd in rice. Pot experiments were conducted to evaluate Cd/Cu translocation in a contaminated soil-rice system under Free Air Temperature Increase (FATI). The results showed that warming gradually decreased soil porewater pH and increased water-soluble Cd/Cu concentration, reduced formation of iron plaque on root surface, and thus significantly increased total uptake of Cd/Cu by rice. Subsequently, warming significantly promoted Cd translocation from root to shoot, and increased Cd distribution percentage in shoot, while Cu was not significantly affected. Enhanced Cd uptake and translocation synergistically resulted in higher rice grain contamination with increasing concentration from 0.27 to 0.65 and 0.14-0.40 mg kg(-1) for Indica and Japonica rice, respectively. However increase of Cu in brown grain was only attributed to its uptake enhancement under warming. Our study provides a new understanding about the food production insecurity of heavy metal contaminated soil under the future global warming.

  5. (Cd, Cu, Ni and Pb) content in two fish species of Persian Gulf in ...

    African Journals Online (AJOL)

    GREGORY

    2010-09-13

    Sep 13, 2010 ... Heavy metal (HMs) pollution of aquatic environment has become a great concern in recent years. ... study, cadmium (Cd), copper (Cu), nickel (Ni) and lead (Pb) levels ... toxic effects on organs (Macfarlane and Burchettt 2000).

  6. 113Cd-NMR investigation of a cadmium-substituted copper, zinc-containing superoxide dismutase from yeast

    DEFF Research Database (Denmark)

    Kofod, Pauli; Bauer, Rogert; Danielsen, Eva

    1991-01-01

    113Cd nuclear magnetic resonance spectroscopy has been used to investigate the metal binding sites of cadmium-substituted copper,zinc-containing superoxide dismutase from baker's yeast. NMR signals were obtained for 113Cd(II) at the Cu site as well as for 113Cd(II) at the Zn site. The two subunits...... an explanation for the discrepancy in the literature regarding 113Cd-NMR investigations of bovine superoxide dismutase....

  7. Determination of Pb (Lead, Cd (Cadmium, Cr (Chromium, Cu (Copper, and Ni (Nickel in Chinese tea with high-resolution continuum source graphite furnace atomic absorption spectrometry

    Directory of Open Access Journals (Sweden)

    Wen-Si Zhong

    2016-01-01

    Full Text Available The contents of lead, cadmium, chromium, copper, and nickel were determined in 25 tea samples from China, including green, yellow, white, oolong, black, Pu'er, and jasmine tea products, using high-resolution continuum source graphite furnace atomic absorption spectrometry. The methods used for sample preparation, digestion, and quantificational analysis were established, generating satisfactory analytical precisions (represented by relative standard deviations ranging from 0.6% to 2.5% and recoveries (98.91–101.32%. The lead contents in tea leaves were 0.48–10.57 mg/kg, and 80% of these values were below the maximum values stated by the guidelines in China. The contents of cadmium and chromium ranged from 0.01 mg/kg to 0.39 mg/kg and from 0.27 mg/kg to 2.45 mg/kg, respectively, remaining in compliance with the limits stipulated by China's Ministry of Agriculture. The copper contents were 7.73–63.71 mg/kg; only 64% of these values complied with the standards stipulated by the Ministry of Agriculture. The nickel contents ranged from 2.70 mg/kg to 13.41 mg/kg. Consequently, more attention must be paid to the risks of heavy metal contamination in tea. The quantitative method established in this work lays a foundation for preventing heavy metal toxicity in human from drinking tea and will help establish regulations to control the contents of heavy metals in tea.

  8. Assessment of potential soybean cadmium excluder cultivars at different concentrations of Cd in soils.

    Science.gov (United States)

    Zhi, Yang; He, Kangxin; Sun, Ting; Zhu, Yongqiang; Zhou, Qixing

    2015-09-01

    The selection of cadmium-excluding cultivars has been used to minimize the transfer of cadmium into the human food chain. In this experiment, five Chinese soybean plants were grown in three soils with different concentrations of Cd (0.15, 0.75 and 1.12mg/kg). Variations in uptake, enrichment, and translocation of Cd among these soybean cultivars were studied. The results indicated that the concentration of Cd in seeds that grew at 1.12mg/kg Cd in soils exceeded the permitted maximum levels in soybeans. Therefore, our results indicated that even some soybean cultivars grown on soils with permitted levels of Cd might accumulate higher concentrations of Cd in seeds that are hazardous to human health. The seeds of these five cultivars were further assessed for interactions between Cd and other mineral nutrient elements such as Ca, Cu, Fe, Mg, Mn and Zn. High Cd concentration in soil was found to inhibit the uptake of Mn. Furthermore, Fe and Zn accumulations were found to be enhanced in the seeds of all of the five soybean cultivars in response to high Cd concentration. Cultivar Tiefeng 31 was found to fit the criteria for a Cd-excluding cultivar under different concentrations of Cd in soils.

  9. First-principles study of roles of Cu and Cl in polycrystalline CdTe

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ji-Hui; Park, Ji-Sang; Metzger, Wyatt [National Renewable Energy Laboratory, Golden, Colorado 80401 (United States); Yin, Wan-Jian [National Renewable Energy Laboratory, Golden, Colorado 80401 (United States); College of Physics, Optoelectronics and Energy and Collaborative, Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215006 (China); Wei, Su-Huai, E-mail: suhuaiwei@csrc.ac.cn [National Renewable Energy Laboratory, Golden, Colorado 80401 (United States); Beijing Computational Science Research Center, Beijing 100094 (China)

    2016-01-28

    Cu and Cl treatments are important processes to achieve high efficiency polycrystalline cadmium telluride (CdTe) solar cells, thus it will be beneficial to understand the roles they play in both bulk CdTe and CdTe grain boundaries (GBs). Using first-principles calculations, we systematically study Cu and Cl-related defects in bulk CdTe. We find that Cl has only a limited effect on improving p-type doping and too much Cl can induce deep traps in bulk CdTe, whereas Cu can enhance p-type doping of bulk CdTe. In the presence of GBs, we find that, in general, Cl and Cu will prefer to stay at GBs, especially for those with Te-Te wrong bonds, in agreement with experimental observations.

  10. Assessment of cadmium (Cd) concentration in arable soil in China.

    Science.gov (United States)

    Zhang, Xiuying; Chen, Dongmei; Zhong, Taiyang; Zhang, Xiaomin; Cheng, Min; Li, Xinhui

    2015-04-01

    Cadmium (Cd) concentration in arable soil has drawn broad public attention due to its direct effect on Cd concentration in food. However, there have been few studies of surveying Cd accumulation on the national scale in China. This paper collected 486 studies of Cd concentrations in Chinese arable soil. The results showed that the average Cd concentration was 0.27 mg/kg, higher than its background value, indicating that Cd had been introduced into arable soil by human activity. The Cd concentrations in areas of mining and smelting, urban areas, and areas irrigated by wastewater were obviously higher than that in remote areas. Spatially, Cd concentrations were lower in the north than those in the south, and many hotspots existed throughout China due to mining and smelting activities. Most Cd in the arable soil were accumulated from external sources in all investigated provinces except Ningxia Hui Autonomous Region.

  11. Spatial distribution of Cd and Cu in soils in Shenyang Zhangshi Irrigation Area (SZIA), China

    Institute of Scientific and Technical Information of China (English)

    Lina SUN; Xiao-e YANG; Wen-qing WANG; Li MA; Su CHEN

    2008-01-01

    Heavy metal contamination of soils, derived from sewage irrigation, mining and inappropriate utilization of various agrochemicals and pesticides, and so on, has been of wide concern in the last several decades. The Shenyang Zhangshi Irrigation Area (SZIA) in China is a representative area of heavy metal contamination of soils resulting from sewage irrigation for about 30 years. This study investigated the spatial distribution and temporal variation of soil cadmium (Cd) and copper (Cu) contamination in the SZIA. The soil samples were collected from the SZIA in 1990 and 2004; Cd and Cu in soils was analyzed and then the spatial distribution and temporal variation of Cd and Cu in soils were modeled using Kriging methods. The results show that long-term sewage irrigation had caused serious Cd and Cu contamination in soils. The mean and the maximum of soil Cd are markedly higher than the levels in second grade standard soil (LSGSS) in China, and the maximum of soil Cu is close to the LSGSS in China in 2004 and is more than the LSGSS in China in 1990. The contamination magnitude of soil Cd and the soil extent of Cd con- tamination had evidently increased since sewage irrigation ceased in 1992. The contamination magnitude of soil Cu and the soil extent of Cu contamination had evidently increased in topsoil, but obviously decresed in subsoil. The soil contamination of Cd and Cu was mainly related to Cd and Cu reactivation of contaminated sediments in Shenyang Xi River and the import of Cd and Cu during irrigation. The eluviation of Cd and Cu in contaminated topsoil with rainfall and irrigation water was another factor of temporal-spatial variability of Cd and Cu contamination in soils.

  12. Cu-doped ZnO nanoporous film for improved performance of CdS/CdSe quantum dot-sensitized solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Myeong-Soo; Son, Min-Kyu; Kim, Soo-Kyoung; Park, Songyi; Prabakar, Kandasamy; Kim, Hee-Je, E-mail: heeje@pusan.ac.kr

    2014-11-03

    Copper (Cu) doped zinc oxide (ZnO) powders were synthesized by co-precipitation method with different at% (0 and 0.5 at%) of Cu dopant. Cu-doped ZnO nanoporous (NP) films were fabricated to enhance the performance of the ZnO based cadmium sulfide (CdS) and cadmium selenide (CdSe) quantum dot-sensitized solar cells (QDSSCs). The existence of Cu ions in the Cu-doped ZnO NP film was detected by X-ray fluorescence. The surface morphology, microstructure and crystal structure of Cu-doped ZnO NP films were analyzed by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The optical property of CdS/CdSe co-sensitized Cu-doped ZnO NP film was studied by UV–vis absorption spectroscopy. The photovoltaic performance and electrical property of Cu-doped ZnO CdS/CdSe QDSSCs were studied by current–voltage characteristic curves and electrochemical impedance spectroscopy under air mass 1.5 condition. As a result, short circuit current density and fill factor increased from 9.074 mA/cm{sup 2} and 0.403 to 9.865 mA/cm{sup 2} and 0.427 respectively, based on the enhanced absorbance and electron transport by Cu-doping. This led to the increasing light conversion efficiency from 2.27% to 2.61%. - Highlights: • Cu-doped ZnO powders were synthesized by co-precipitation method. • Cu-doped ZnO nanoporous films with high crystallinity were uniformly deposited. • Absorbance of Cu-doped ZnO nanoporous film was enhanced. • Electron conductivity of Cu-doped ZnO nanoporous film was enhanced. • Performance of Cu-doped ZnO CdS/CdSe QDSSC was improved.

  13. Physical properties of electron beam evaporated CdTe and CdTe:Cu thin films

    Energy Technology Data Exchange (ETDEWEB)

    Punitha, K. [Department of Physics, Alagappa University, Karaikudi 630004 (India); Sivakumar, R., E-mail: krsivakumar1979@yahoo.com [Directorate of Distance Education, Alagappa University, Karaikudi 630004 (India); Sanjeeviraja, C. [Department of Physics, Alagappa Chettiar College of Engineering and Technology, Karaikudi 630004 (India); Sathe, Vasant; Ganesan, V. [UGC-DAE Consortium for Scientific Research, Indore 452001 (India)

    2014-12-07

    In this paper, we report on physical properties of pure and Cu doped cadmium telluride (CdTe) films deposited onto corning 7059 microscopic glass substrates by electron beam evaporation technique. X-ray diffraction study showed that all the deposited films belong to amorphous nature. The average transmittance of the films is varied between 77% and 90%. The optical energy band gap of pure CdTe film is 1.57 eV and it decreased to 1.47 eV upon 4 wt. % of Cu addition, which may be due to the extension of localized states in the band structure. The refractive index of the films was calculated using Swanepoel method. It was observed that the dispersion data obeyed the single oscillator of the Wemple-Didomenico model, from which the dispersion energy (E{sub d}) parameters, dielectric constants, plasma frequency, and oscillator energy (E{sub o}) of CdTe and CdTe:Cu films were calculated and discussed in detail with the light of possible mechanisms underlying the phenomena. The variation in intensity of photoluminescence band edge emission peak observed at 820 nm with Cu dopant is due to the change in surface state density. The observed trigonal lattice of Te peaks in the micro-Raman spectra confirms the p-type conductive nature of films, which was further corroborated by the Hall effect measurement. The lowest resistivity of 6.61 × 10{sup 4} Ω cm was obtained for the CdTe:Cu (3 wt. %) film.

  14. Au/Cu2Te/CdTe/CdS/TCO/Glass Solar Cells with CdIn2O4 Obtained by Sol-Gel as TCO

    OpenAIRE

    J. Márquez Marín; G. Torres Delgado; M. A. Aguilar Frutis; R. Castanedo Pérez; Zelaya Ángel, O.

    2014-01-01

    An Au/Cu2Te/CdTe/CdS/TCO/glass heterostructure based superstrate solar cells with 2.5 mm2 of area, where the CdTe layer was prepared by means of closed spaced sublimation (CSS) and the CdS by chemical bath, reached an efficiency η value of 12.1%. As transparent conductive oxide (TCO), a thin film of cadmium-indium oxide (CdIn2O4:CIO), obtained by sol-gel technique, was used. A systematic optimization of the thermal activation of the CdTe/CdS/CIO central part of the device with a CdCl2 vapor a...

  15. The CuInSe{sub 2}-CuGaSe{sub 2}-2CdSe system and crystal growth of the {gamma}-solid solutions

    Energy Technology Data Exchange (ETDEWEB)

    Marushko, L.P., E-mail: marushko777@mail.r [Department of General and Inorganic Chemistry, Volyn National University, Voli Ave 13, Lutsk 43009 (Ukraine); Romanyuk, Y.E. [Swiss Federal Laboratories for Materials Testing and Research, EMPA, Uberlandstrasse 129, CH-8600 Duebendorf (Switzerland); Piskach, L.V.; Parasyuk, O.V.; Olekseyuk, I.D. [Department of General and Inorganic Chemistry, Volyn National University, Voli Ave 13, Lutsk 43009 (Ukraine); Volkov, S.V.; Pekhnyo, V.I. [V.I. Vernadskii Institute for General and Inorganic Chemistry of the Ukrainian National Academy of Sciences, Palladina Ave 32-34, Kyiv 03680 (Ukraine)

    2010-08-27

    Phase equilibria in the CuInSe{sub 2}-CuGaSe{sub 2}-2CdSe system are studied using differential-thermal analysis and phase X-ray diffraction. An isothermal section of the system at 870 K, and phase diagrams of polythermal sections CuInSe{sub 2}-CuGaSe{sub 2} and 'CuCd{sub 2}InSe{sub 4}'-CuCd{sub 2}GaSe{sub 4} have been constructed. The 'CuCd{sub 2}InSe{sub 4}'-CuCd{sub 2}GaSe{sub 4} section is not quasi-binary and includes two solid solution regions with the wurtzite and sphalerite structure-types. Eleven crystals of the {gamma}-solid solutions with the sphalerite structure-type were grown by the Bridgman technique. The non-quasi-binary nature of the 'CuCd{sub 2}InSe{sub 4}'-CuCd{sub 2}GaSe{sub 4} section gives rise to compositional gradients for copper, cadmium, and gallium along the crystal growth direction so that the crystal tip is enriched with CdSe. Band gap of the grown crystals varies from 1.05 eV to {approx}1.30 eV.

  16. Cadmium telluride (CdTe) and cadmium selenide (CdSe) leaching behavior and surface chemistry in response to pH and O2.

    Science.gov (United States)

    Zeng, Chao; Ramos-Ruiz, Adriana; Field, Jim A; Sierra-Alvarez, Reyes

    2015-05-01

    Cadmium telluride (CdTe) and cadmium selenide (CdSe) are increasingly being applied in photovoltaic solar cells and electronic components. A major concern is the public health and ecological risks associated with the potential release of toxic cadmium, tellurium, and/or selenium species. In this study, different tests were applied to investigate the leaching behavior of CdTe and CdSe in solutions simulating landfill leachate. CdTe showed a comparatively high leaching potential. In the Toxicity Characteristic Leaching Procedure (TCLP) and Waste Extraction Test (WET), the concentrations of cadmium released from CdTe were about 1500 and 260 times higher than the regulatory limit (1 mg/L). In contrast, CdSe was relatively stable and dissolved selenium in both leaching tests was below the regulatory limit (1 mg/L). Nonetheless, the regulatory limit for cadmium was exceeded by 5- to 6- fold in both tests. Experiments performed under different pH and redox conditions confirmed a marked enhancement in CdTe and CdSe dissolution both at acidic pH and under aerobic conditions. These findings are in agreement with thermodynamic predictions. Taken as a whole, the results indicate that recycling of decommissioned CdTe-containing devices is desirable to prevent the potential environmental release of toxic cadmium and tellurium in municipal landfills.

  17. Influence of diethyldithiocarbamate on cadmium and copper toxicity ...

    African Journals Online (AJOL)

    drinie

    Toxic effects of two heavy metals, cadmium (Cd) and copper (Cu), and a fungicide, diethyldithiocarbamate, ... the other hand, Cd in the culture medium increased Cu absorption. ... shown the interest of this test species for the evaluation of toxic.

  18. Spatial distribution of Cd and Cu in soils in Shenyang Zhangshi Irrigation Area (SZIA), China*

    OpenAIRE

    Sun, Li-Na; Yang, Xiao-Bo; Wang, Wen-Qing; MA,LI; Chen, Su

    2008-01-01

    Heavy metal contamination of soils, derived from sewage irrigation, mining and inappropriate utilization of various agrochemicals and pesticides, and so on, has been of wide concern in the last several decades. The Shenyang Zhangshi Irrigation Area (SZIA) in China is a representative area of heavy metal contamination of soils resulting from sewage irrigation for about 30 years. This study investigated the spatial distribution and temporal variation of soil cadmium (Cd) and copper (Cu) contami...

  19. Divalent Cu, Cd, and Pb Biosorption in Mixed Solvents

    Directory of Open Access Journals (Sweden)

    M. H. Al-Qunaibit

    2009-01-01

    Full Text Available Dead dried Chlorella vulgaris was studied in terms of its performance in binding divalent copper, cadmium, and lead ions from their aqueous or 50% v/v methanol, ethanol, and acetone solutions. The percentage uptake of cadmium ions exhibited a general decrease with decrease in dielectric constant values, while that of copper and lead ions showed a general decrease with increase in donor numbers. Uptake percentage becomes less sensitive to solvent properties the larger the atomic radius of the biosorbed ion, and uptake of copper was the most affected. FT-IR analyses revealed stability of the biomass in mixed solvents and a shift in vibrations of amide(I and (II, carboxylate, glucose ring, and metal oxygen upon metal binding in all media. ΔνCOO values (59–69 cm−1 confirmed bidentate metal coordination to carboxylate ligands. The value of νasCOO increased slightly upon Cu, Cd, and Pb biosorption from aqueous solutions indicating lowering of symmetry, while a general decrease was noticed in mixed solvents pointing to the opposite. M–O stretching frequencies increased unexpectedly with increase in atomic mass as a result of solvent effect on the nature of binding sites. Lowering polarity of the solvent permits variations in metal-alga bonds strengths; the smaller the metal ion, the more affected.

  20. PENENTUAN KANDUNGAN LOGAM Cd DAN Cu DALAM PRODUK IKAN KEMASAN KALENG SECARA SPEKTROFOTOMETRI SERAPAN ATOM (SSA

    Directory of Open Access Journals (Sweden)

    Hellna Tehubijuluw

    2013-05-01

    Full Text Available Determination of cadmium and copper concentration of canned fish have been done. Some canned fished were taken away from three mercks circulating in a market and marked as RS (the 1st sample, NF(2nd sample, and CP(3rd sample. The aim of this research is to determine of  cadmium (Cd and copper (Cu content of canned fish and to compare the content with the standard limit regulated by the Directorate General of Drug and Food Control No: 03725/B/SK/VII/89. Determination of metal concentration was conducted using  atomic absorption spectrophotometer (AAS. It was found that Cd concentrations of RS and  NF samples are 0.1969 mg/kg and0.0448 mg/kg, respecively while for  CP it was not detected. For Cu concentrations of  RS, NF, and CP are 3.3303 mg/kg, 4.6130 mg/kg, 3.3047 mg/kg  respectively. The results indicated that the samples of the canned fishes  have been contaminated with Cd and Cu metals although the levels of those metals are still lower than  the maximum limit regulated by the Directorate General of Drug and Food Control No: 03725/B/SK/VII/89 where the maximum limit for Cd and  Cu are 0,2 mg.kg and 5.0 mg/kg respectively.    

  1. Experimental and theoretical investigations of cadmium diffusion in vacancy-rich Cu(In, Ga)Se2 material

    Science.gov (United States)

    Biderman, Norbert J.

    Copper indium gallium selenide (Cu(In,Ga)Se2 or CIGS) has become a significant topic of research and development for photovoltaic application. CIGS photovoltaic devices have demonstrated record conversion efficiencies however are still below the maximum solar conversion efficiency. Losses in performance have been attributed structural defects including vacancies, doping, grain boundaries, and compositional non-uniformity that are poorly understood and controlled. The cadmium sulfide (CdS) buffer layer plays a critical role in high-performance CIGS photovoltaic devices, serving as the n-type component of the p-n junction formed with the p-type CIGS absorber layer. Cadmium diffusion into the CIGS surface during CdS deposition creates a buried p-n homojunction in addition to the CIGS/CdS p-n heterojunction. CdS is believed to assist in reducing carrier recombination at the CIGS/CdS interface, an important attribute of high-efficiency solar cells. In the present work, cadmium diffusion mechanisms in CIGS are experimentally investigated via secondary ion mass spectroscopy (SIMS) and Auger electron spectroscopy (AES). Two cadmium diffusion profiles with distinct Arrhenius diffusion kinetics within a single depth profile of the CIGS thin film are observed with SIMS and AES: an intense first-stage diffusion profile directly below the CIGS/CdS interface and a long-range, second-stage diffusion profile that extends deep into the thin film. Cadmium grain boundary diffusion is also detected in fine-grain CIGS samples. These multiple diffusion processes are quantified in the present work, and the two-stage cadmium diffusion profiles suggest distinctive lattice diffusion mechanisms. Calculations and modeling of general impurity diffusion via interstitial sites in CIGS are also conducted via numerical including cadmium, iron, and zinc. In the numerical simulations, the standard diffusion-reaction kinetics theory is extended to vacancy-rich materials like CIGS that contain 1 at

  2. Cadmium underpotential deposition on Cu(111) in situ scanning tunneling microscopy.

    Science.gov (United States)

    Hommrich, J; Hümann, S; Wandelt, K

    2002-01-01

    Atomically resolved in situ STM images are presented for an underpotentially deposited (upd) cadmium layer on a Cu(111) electrode from a 10(-4) M CdCl2/10(-2) M HCl solution. The observed moiré-like structure seen in the images is analysed by means of an algebraic model for this long-range superstructure. A structure model for the upd layer is developed which reflects all features of the observed moiré pattern. Furthermore the height modulation was simulated by a hard-sphere model for the Cd overlayer and shows remarkable agreement with the detailed tunneling current density distribution of the measured STM images. The existence of translational and rotational domains is demonstrated. The results are also compared and shown to be fully consistent with previous (ex situ) low-energy electron diffraction (LEED) observations of this system. The mechanism of Cd upd involves a dynamic site exchange between preadsorbed Cl- anions and adsorbing Cd2+ cations as previously concluded from ex situ X-ray photoelectron (XPS) and low-energy ion scattering (LEIS) measurements.

  3. Photovoltaic properties of sintered CdS/CdTe solar cells doped with Cu

    Science.gov (United States)

    Park, J. W.; Ahn, B. T.; Im, H. B.; Kim, C. S.

    1992-11-01

    The effect of Cu doping before sintering on the photovoltaic properties of sintered CdS/CdTe solar cells were investigated by putting various amounts of CuCl2 either into the CdTe layer or into the back contact carbon layer. It was found that, as the amount of CuCl2 in the CdTe layers increased up to 25 ppm, the cell parameters of the sintered CdS/CdTe solar cells remained at about the same values, and then decreased sharply with further increase of CuCl2. The decreases in cell parameters are caused mainly by the increase in the resistivity of CdS and CdTe layer and the decrease in the optical transmission of CdS due to Cu doping from the CdTe.

  4. Electro-Plating and Characterisation of CdTe Thin Films Using CdCl2 as the Cadmium Source

    OpenAIRE

    Nor A. Abdul-Manaf; Hussein I. Salim; Mohammad L. Madugu; Olajide I. Olusola; Imyhamy M. Dharmadasa

    2015-01-01

    Cadmium telluride (CdTe) thin films have been successfully prepared from an aqueous electrolyte bath containing cadmium chloride (CdCl2)·H2O and tellurium dioxide (TeO2) using an electrodeposition technique. The structural, electrical, morphological and optical properties of these thin films have been characterised using X-ray diffraction (XRD), Raman spectroscopy, optical profilometry, DC current-voltage (I-V) measurements, photoelectrochemical (PEC) cell measurement, scanning electron micr...

  5. Thin film CdS/Cu/sub 2/S solar cells by chemical spraying

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, J.F.

    1976-12-15

    This project involves further work on a process developed to make very thin film CdS/Cu/sub 2/S solar cells. The process is adapted to the float glass process and consists of spraying suitable chemicals on a moving ribbon of glass which floats on a bath of molten metal. The spraying produces the necessary thin films (with suitable optical and electrical properties) of SnO/sub 2/, CdS and Cu/sub 2/S. The CdS films produced are two to three microns thick, thus conserving the use of cadmium. The estimated cost per peak watt is approximately 7 cents (1975 costs) at 5 percent efficiency and an output of 37.6 x 10/sup 6/ square meters annually. The cells are blackwall cells. A float glass plant modified for the process is shown schematically. Research progress is described.

  6. Enhanced Cadmium (Cd Phytoextraction from Contaminated Soil using Cd-Resistant Bacterium

    Directory of Open Access Journals (Sweden)

    Kunchaya Setkit

    2014-01-01

    Full Text Available A cadmium (Cd-resistant bacterium, Micrococcus sp. MU1, is able to produce indole-3-acetic acid and promotes root elongation and plant growth. The potential of this bacterium on enhancement of Cd uptake and bioaccumulation of Cd in Helianthus annuus L. planted in Cd-contaminated soil was evaluated in greenhouse condition. The results showed that Micrococcus sp. MU1promoted the growth of H. annuus L. by increasing the root length, stem height, dry biomass, root to shoot ratio and also significantly increased Cd accumulation in the root and above-ground tissues of H. annuus L. compared to uninoculated control. Re-inoculation with Micrococcus sp. MU1in contaminated soil helped in promoting plant growth and Cd phytoextraction throughout the cultivation period. In addition, phytoextraction coefficient and translocation factor (TF of H. annuus L. inoculated with Micrococcus sp. MU1were higher than that of uninoculated control and TF continuously increased with time. Our results suggested that Micrococcus sp. MU1 has an ability to enhance plant growth and Cd uptake in H. annuus L. Synergistic interaction between Micrococcus sp. MU1 and H. annuus L. could be further applied for Cd phytoextraction in polluted areas.

  7. Cu-Doped-CdS/In-Doped-CdS Cosensitized Quantum Dot Solar Cells

    Directory of Open Access Journals (Sweden)

    Lin Li

    2014-01-01

    Full Text Available Cu-doped-CdS and In-doped-CdS cosensitized (Cu-doped-CdS/In-doped-CdS quantum dot solar cells (QDSCs are introduced here. Different cosensitized sequences, doping ratios, and the thickness (SILAR cycles of Cu-doped-CdS and In-doped-CdS are discussed. Compared with undoped CdS QDSCs, the short circuit current density, UV-Vis absorption spectra, IPCE (monochromatic incident photon-to-electron conversion, open circuit voltage, and so on are all improved. The photoelectric conversion efficiency has obviously improved from 0.71% to 1.28%.

  8. Pathways toward higher performance CdS/CdTe devices: Te exposure of CdTe surface before ZnTe:Cu/Ti contacting

    Energy Technology Data Exchange (ETDEWEB)

    Gessert, T.A., E-mail: tim.gessert@nrel.gov; Burst, J.M.; Wei, S.-H.; Ma, J.; Kuciauskas, D.; Rance, W.L.; Barnes, T.M.; Duenow, J.N.; Reese, M.O.; Li, J.V.; Young, M.R.; Dippo, P.

    2013-05-01

    Many studies of thin-film CdS/CdTe photovoltaic devices have suggested that performance may be improved by reducing recombination due to Te-vacancy (V{sub Te}), Te antisite (Te{sub Cd}), or Te-interstitial (Te{sub i}) defects. Although formation of these intrinsic defects is likely influenced by CdTe deposition parameters, it may be also coupled to the formation of beneficial cadmium vacancy (V{sub Cd}) defects. In this study, we expose the CdTe surface to Te vapor prior to ZnTe:Cu/Ti contact-interface formation with the goal of reducing V{sub Te} without significantly reducing V{sub Cd}. Initial results show that when this modified contact is used on a CdCl{sub 2}-treated CdS/CdTe device, poorer device performance results. This suggests two things: First, the amount of free-Te available during contact formation (either from chemical etching or Cu{sub x}Te or ZnTe deposition) may be a more important parameter to device performance than previously appreciated. Second, if processes have been used to reduce the effect of V{sub Te} (e.g., oxygen and chlorine additions), adding even a small amount of Te may produce detrimental defects. - Highlights: ► Te exposure of CdS/CdTe back contact reduces device performance. ► Field strength and minority carrier lifetime reduced. ► Calculations suggest formation of Te on Cd antisite defect.

  9. Concentrations of Zn, Mn, Cu and Cd in different tissues of perch (Perca fluviatilis) and in perch intestinal parasite (Acanthocephalus lucii) from the stream near Prague (Czech Republic)

    Energy Technology Data Exchange (ETDEWEB)

    Jankovska, Ivana, E-mail: jankovska@af.czu.cz [Department of Zoology and Fisheries, Faculty of Agrobiology, Food and Natural Resources, Czech University of Life Sciences, 165 21 Prague 6 - Suchdol (Czech Republic); Miholova, Daniela [Department of Chemistry, Faculty of Agrobiology, Food and Natural Resources, Czech University of Life Sciences, 165 21 Prague 6 - Suchdol (Czech Republic); Lukesova, Daniela [Department of Animal Science and Food Processing in Tropics and Subtropics, Institute of Tropics and Subtropics, Czech University of Life Sciences, 165 21 Prague 6 - Suchdol (Czech Republic); Kalous, Lukas; Valek, Petr; Romocusky, Stepan; Vadlejch, Jaroslav; Petrtyl, Miloslav; Langrova, Iva; Cadkova, Zuzana [Department of Zoology and Fisheries, Faculty of Agrobiology, Food and Natural Resources, Czech University of Life Sciences, 165 21 Prague 6 - Suchdol (Czech Republic)

    2012-01-15

    We monitored concentrations of Cd, Cu, Mn and Zn in acantocephalan parasites (Acanthocephalus lucii) and its final host (Perca fluviatilis). The concentrations in parasites were found to be significantly higher than those found in the muscle, gonads and liver of fish host. The bioaccumulation factor values were 194, 24.4, 2.2 and 4.7 for Cd, Cu, Mn and Zn, respectively. This suggests a benefit for the host due to the high accumulation of toxic cadmium.

  10. Adsorption of Cd(II) and Cu(II) from aqueous solution by carbonate hydroxylapatite derived from eggshell waste

    Energy Technology Data Exchange (ETDEWEB)

    Zheng Wei [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Li Xiaoming [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China)]. E-mail: xmli@hnu.cn; Yang Qi [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Zeng Guangming [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Shen Xiangxin [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Zhang Ying [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Liu Jingjin [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China)

    2007-08-17

    Carbonate hydroxylapatite (CHAP) synthesized by using eggshell waste as raw material has been investigated as metal adsorption for Cd(II) and Cu(II) from aqueous solutions. The effect of various parameters on adsorption process such as contact time, solution pH, amount of CHAP and initial concentration of metal ions was studied at room temperature to optimize the conditions for maximum adsorption. The results showed that the removal efficiency of Cd(II) and Cu(II) by CHAP could reach 94 and 93.17%, respectively, when the initial Cd(II) concentration 80 mg/L and Cu(II) 60 mg/L and the liquid/solid ratio was 2.5 g/L. The equilibrium sorption data for single metal systems at room temperature could be described by the Langmuir and Freundlich isotherm models. The highest value of Langmuir maximum uptake, (b), was found for cadmium (111.1 mg/g) and copper (142.86 mg/g). Similar Freundlich empirical constants, K, were obtained for cadmium (2.224) and copper (7.925). Ion exchange and surface adsorption might be involved in the adsorption process of cadmium and copper. Desorption experiments showed that CaCl{sub 2}, NaCl, acetic acid and ultrasonic were not efficient enough to desorb substantial amount of metal ions from the CHAP. The results obtained show that CHAP has a high affinity to cadmium and copper.

  11. Photoluminescence of Cu-doped CdTe and related stability issues in CdS/CdTe solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Grecu, D. [University of Toledo, Toledo, Ohio 43606-3390 (United States); Compaan, A. D. [University of Toledo, Toledo, Ohio 43606-3390 (United States); Young, D. [National Renewable Energy Laboratory, Golden, Colorado 80401 (United States); Jayamaha, U. [First Solar LLC., Perrysburg, Ohio 43551 (United States); Rose, D. H. [First Solar LLC., Perrysburg, Ohio 43551 (United States)

    2000-09-01

    We explore Cu electronic states in CdTe using photoluminescence as the main investigative method. Our results are consistent with some Cu atoms occupying substitutional positions on the Cd sublattice and with others forming Frenkel pairs of the type Cu{sub i}{sup +}-V{sub Cd}{sup -} involving an interstitial Cu and a Cd vacancy. In addition, we find that Cu-doped CdTe samples exhibit a significant ''aging'' behavior, attributable to the instability of Cu acceptor states as verified by our Hall measurements. The aging appears to be reversible by a 150-200 degree sign C anneal. Our results are used to explain efficiency degradation of some CdTe solar-cell devices which use Cu for the formation of a backcontact. (c) 2000 American Institute of Physics.

  12. Au/Cu2Te/CdTe/CdS/TCO/Glass Solar Cells with CdIn2O4 Obtained by Sol-Gel as TCO

    Directory of Open Access Journals (Sweden)

    J. Márquez Marín

    2014-01-01

    Full Text Available An Au/Cu2Te/CdTe/CdS/TCO/glass heterostructure based superstrate solar cells with 2.5 mm2 of area, where the CdTe layer was prepared by means of closed spaced sublimation (CSS and the CdS by chemical bath, reached an efficiency η value of 12.1%. As transparent conductive oxide (TCO, a thin film of cadmium-indium oxide (CdIn2O4:CIO, obtained by sol-gel technique, was used. A systematic optimization of the thermal activation of the CdTe/CdS/CIO central part of the device with a CdCl2 vapor ambient made the conversion efficiency of the Au/Cu2Te/CdTe/CdS/CIO/glass heterostructure reaches 9.94% for the CdTe layer with thickness of 1.8 μm. This efficiency was reached only through an open circuit voltage VOC optimization. A maximum η of 12.1% was reached with the established procedure of optimization and when the CdTe layer thickness was increased to 3.1 ± 0.05 μm. The substitution of CIO by commercial ITO provoked in the cell a decrease of η from 12.1% to 7.2%, both devices prepared under the same conditions. Starting from these results, we can say that CIO was a better TCO than commercial ITO in our solar cell, with the advantage that CIO was obtained by sol-gel, which is a simple and economical technique.

  13. ELECTROOXIDATION OF METHANOL ON PT MODIFIED WITH ADATOMS (NI, CU, PB, CD

    Directory of Open Access Journals (Sweden)

    A.Khouchaf

    2015-05-01

    Full Text Available The electro oxidation of methanol has been studied in alkaline medium NaOH 0.1 M and acid medium H2SO4 0.5 M on a platinum electrode and a platinum modified by adatom adsorption (Ni, Cu, Pb, and Cd. The influence of different experimental variables (methanol concentration, and temperature is reported. Preliminary investigations by cyclic voltammetry showed that the catalytic activity of platinum is still too low to be considered as a practical catalyst. Underpotential deposition of lead, nickel, cadmium, or copper adatoms at platinum allowed increasing significantly the current densities.

  14. Photoluminescence study of Cu diffusion in CdTe

    Energy Technology Data Exchange (ETDEWEB)

    Grecu, D.; Compaan, A.D. [Department of Physics, University of Toledo, Toledo, Ohio (United States)

    1999-03-01

    We report changes in the photoluminescence spectra associated with the diffusion of Cu in CdTe thin films used in CdTe/CdS solar cells. Films grown by vapor transport deposition and radio-frequency sputtering as well as single crystal CdTe were included in the study. The main effects of Cu diffusion appear to be the quenching of a donor-acceptor transition associated with Cd vacancies and the increase in intensity of a lower energy broad-band transition. The PL is subsequently used to explore the effects of electric fields on Cu diffusion. The role of Te as a diffusion barrier for Cu is investigated. {copyright} {ital 1999 American Institute of Physics.}

  15. New roles for icosahedral clusters in intermetallic phases: micelle-like segregation of Ca-Cd and Cu-Cd interactions in Ca10Cd27Cu2.

    Science.gov (United States)

    Hadler, Amelia B; Harris, Nicholas A; Fredrickson, Daniel C

    2013-11-20

    Despite significant progress in the structural characterization of the quasicrystalline state, the chemical origins of long- and short-range icosahedral order remain mysterious and a subject of debate. In this Article, we present the crystal structure of a new complex intermetallic phase, Ca10Cd27Cu2 (mC234.24), whose geometrical features offer clues to the driving forces underlying the icosahedral clusters that occur in Bergman-type quasicrystals. Ca10Cd27Cu2 adopts a C-centered monoclinic superstructure of the 1/1 Bergman approximant structure, in which [110] layers of Bergman clusters in the 1/1 structure are separated through the insertion of additional atoms (accompanied by substantial positional disorder). An examination of the coordination environments of Ca and Cu (in the ordered regions) reveals that the structure can be viewed as a combination of coordination polyhedra present in the nearest binary phases in the Ca-Cd-Cu compositional space. A notable feature is the separation of Ca-Cd and Cu-Cd interactions, with Bergman clusters emerging as Ca-Cd Friauf polyhedra (derived from the MgZn2-type CaCd2 phase) encapsulate a Cu-Cd icosahedron similar to those appearing in Cu2Cd5. DFT chemical pressure calculations on nearby binary phases point to the importance of this segregation of Ca-Cd and Cu-Cd interactions. The mismatch in atomic size between Cu and Cd leads to an inability to satisfy Ca-Cu and Ca-Cd interactions simultaneously in the Friauf polyhedra of the nearby Laves phase CaCd2. The relegation of the Cu atoms to icosahedra prevents this frustration while nucleating the formation of Bergman clusters.

  16. Underpotential deposition of cadmium onto Cu(111 and Cu(110 from chloride containing solutions

    Directory of Open Access Journals (Sweden)

    B. M. JOVIC

    2001-05-01

    Full Text Available Underpotential deposition (UPD of Cd onto the (111 and (110 faces of copper in chloride containing electrolyte has been investigated by cyclic voltammetry and the potentiostatic pulse technique. It was shown that the UPD of Cd onto the (111 face of copper is characterized by two pairs of peaks, one pair corresponding to the formation of the (Ö19×Ö19R23.4° structure of Cd and the other one, taking place close to the reversible potential of Cd deposition, corresponding to the alloying of Cu with Cd. Deposition of (Ö19×Ö19R23.4° structure of Cd was found to take place by the mechanism of replacement of the adsorbed structure of chloride, without chloride desorption (the chloride stays adsorbed on top of the Cd layer. Similar behaviour was found for the (110 face of copper, with more pronounced alloying which provokes an irreversible change of the original (110 surface of copper.

  17. Accumulation and tolerance characteristics of cadmium in a halophytic Cd-hyperaccumulator, Arthrocnemum macrostachyum

    Energy Technology Data Exchange (ETDEWEB)

    Redondo-Gomez, Susana, E-mail: susana@us.es [Departamento de Biologia Vegetal y Ecologia, Facultad de Biologia, Universidad de Sevilla, Apartado 1095, 41080 Sevilla (Spain); Mateos-Naranjo, Enrique; Andrades-Moreno, Luis [Departamento de Biologia Vegetal y Ecologia, Facultad de Biologia, Universidad de Sevilla, Apartado 1095, 41080 Sevilla (Spain)

    2010-12-15

    The potential of the extreme halophyte Arthrocnemum macrostachyum was examined to determine its tolerance and ability to accumulate cadmium for phytoremediation purposes. A glasshouse experiment was designed to investigate the effect of cadmium from 0 to 1.35 mmol l{sup -1} on the growth and the photosynthetic apparatus of A. macrostachyum by measuring chlorophyll fluorescence parameters, gas exchange and photosynthetic pigment concentrations. We also determined ash, cadmium, calcium, copper, iron, manganese, magnesium, phosphorous, sodium, and zinc concentrations, and C/N ratio. A. macrostachyum demonstrated hypertolerance to cadmium stress; it did not show phytotoxicity at shoot concentration as high as 70 mg kg{sup -1}. The bioaccumulator factors exceeded the critical value (1.0) for all Cd treatments, and the transport factors indicated that this species has higher ability to transfer Cd from roots to shoots at lower Cd concentrations. At 1.35 mmol l{sup -1} Cd A. macrostachyum showed 25% biomass reduction after a month of treatment. Long-term effects of cadmium on the growth were mainly determined by variations in net photosynthetic rate (P{sub N}). Reductions in P{sub N} could be accounted by higher dark respiration and lower pigment concentrations. Finally, A. macrostachyum has the basic characteristics of a Cd-hyperaccumulator and may be useful for restoring Cd-contaminated sites.

  18. Photoluminescence studies of CdS and CdS:Cu

    Science.gov (United States)

    Price, K. J.

    2000-03-01

    Copper plays an important role in CdS/CdTe heterojunction solar cells, both as a dopant and a back contact to the CdTe. However, Cu is also thought to be responsible for the unstable performance of some types of CdS/CdTe devices under extreme conditions. Recently, Cu has been shown to diffuse from the back contact of the CdTe all the way to the CdS/CdTe interface and into the CdS. We have used photoluminescence (PL) to examine the electrically active states of CdS and CdS:Cu single crystals and polycrystalline films. In undoped films, we detect an exitonic feature at 2.54 eV related to a Cd vacancy. This feature is dramatically reduced in Cu-doped samples, indicating Cu in the Cd vacancy site. In addition, we will present results of light-soaking at 1 sun on the stability of the photoluminescence spectra.

  19. Accumulation and localization of cadmium in potato (Solanum tuberosum) under different soil Cd levels.

    Science.gov (United States)

    Chen, Zhifan; Zhao, Ye; Gu, Lei; Wang, Shuifeng; Li, Yongliang; Dong, Fangli

    2014-06-01

    Phytoavailability and uptake mechanism of Cd in edible plant tissues grown on metal polluted agricultural soils has become a growing concern worldwide. Uptake, transport, accumulation and localization of cadmium in potato organs under different soil Cd levels were investigated using inductively-coupled plasma mass spectrometry and energy dispersive X-ray microanalysis. Results indicated that Cd contents in potato organs increased with increasing soil Cd concentrations, and the order of Cd contents in different organs was leaves > stems/roots > tubers. Root-to-stem Cd translocation coefficients ranged from 0.89 to 1.81. Cd localization in potato tissues suggested that leaves and stems should be the main compartment of Cd storage and uptake. Although low concentrations of Cd migrated from the root to tuber, Cd accumulation in the tuber exceeded the standard for food security. Therefore, the planting of potato plants in farmland containing Cd should be closely evaluated due to its potential to present health risks.

  20. Humic substances from sewage sludge compost as washing agent effectively remove Cu and Cd from soil.

    Science.gov (United States)

    Kulikowska, Dorota; Gusiatin, Zygmunt Mariusz; Bułkowska, Katarzyna; Kierklo, Katarzyna

    2015-10-01

    Although commercially available biosurfactants are environmentally friendly and effectively remove heavy metals from soil, they are costly. Therefore, this study investigated whether inexpensive humic substances (HS) from sewage sludge compost could effectively remove copper (Cu) and cadmium (Cd) from highly contaminated sandy clay loam (S1) and clay (S2). The optimum HS concentration and pH were determined, as well process kinetics. Under optimum conditions, a single washing removed 80.7% of Cu and 69.1% of Cd from S1, and 53.2% and 36.5%, respectively, from S2. Triple washing increased removal from S1 to almost 100% for both metals, and to 83.2% of Cu and 88.9% of Cd from S2. Triple washing lowered the potential ecological risk (Er(i)) of the soils, especially the risk from Cd. HS substances show potential for treating soils highly contaminated with heavy metals, and HS from other sources should be tested with these and other contaminants.

  1. Cu-Related Recombination in CdS/CdTe Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Demtsu, S. H.; Albin, D. S.; Sites, J. R.; Metzger, W. K.; Duda, A.

    2008-02-01

    Cu used in the back contact of CdS/CdTe solar cells is known to improve contact behavior and open-circuit voltage. A study of devices made with varying Cu amounts confirmed these observations. However, Cu was also found to be deleterious to current collection. Time-resolved photoluminescence measurements of CdTe devices show that carrier lifetime decreased with increased Cu concentration. Drive-level-capacitance-profiling and low-temperature photoluminescence suggest this decrease in lifetime was associated with increased recombination center density introduced by Cu in the CdTe layer. The resulting impact of increased Cu on device performance was a voltage-dependent collection of photogenerated carriers that reduced fill-factor.

  2. Chemical behavior of Cu, Zn, Cd, and Pb in a eutrophic reservoir: speciation and complexation capacity.

    Science.gov (United States)

    Tonietto, Alessandra Emanuele; Lombardi, Ana Teresa; Choueri, Rodrigo Brasil; Vieira, Armando Augusto Henriques

    2015-10-01

    This research aimed at evaluating cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) speciation in water samples as well as determining water quality parameters (alkalinity, chlorophyll a, chloride, conductivity, dissolved organic carbon, dissolved oxygen, inorganic carbon, nitrate, pH, total suspended solids, and water temperature) in a eutrophic reservoir. This was performed through calculation of free metal ions using the chemical equilibrium software MINEQL+ 4.61, determination of labile, dissolved, and total metal concentrations via differential pulse anodic stripping voltammetry, and determination of complexed metal by the difference between the total concentration of dissolved and labile metal. Additionally, ligand complexation capacities (CC), such as the strength of the association of metals-ligands (logK'ML) and ligand concentrations (C L) were calculated via Ruzic's linearization method. Water samples were taken in winter and summer, and the results showed that for total and dissolved metals, Zn > Cu > Pb > Cd concentration. In general, higher concentrations of Cu and Zn remained complexed with the dissolved fraction, while Pb was mostly complexed with particulate materials. Chemical equilibrium modeling (MINEQL+) showed that Zn(2+) and Cd(2+) dominated the labile species, while Cu and Pb were complexed with carbonates. Zinc was a unique metal for which a direct relation between dissolved species with labile and complexed forms was obtained. The CC for ligands indicated a higher C L for Cu, followed by Pb, Zn, and Cd in decreasing amounts. Nevertheless, the strength of the association of all metals and their respective ligands was similar. Factor analysis with principal component analysis as the extraction procedure confirmed seasonal effects on water quality parameters and metal speciation. Total, dissolved, and complexed Cu and total, dissolved, complexed, and labile Pb species were all higher in winter, whereas in summer, Zn was mostly present in the

  3. Separation of cadmium and nickel from waste Ni-Cd batteries

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    To separate the cadmium and nickel resources in waste Ni-Cd batteries, a self-designed vacuum distillation recycling system was studied under laboratory conditions. The effects of system temperature, operating pressure, and time on the separation of Ni and Cd were studied respectively. The mechanism of vacuum thermal recycling was also discussed. Results show that vacuum distillation is a very effective separation method for waste Ni-Cd batteries. At a constant pressure, the increase of temperature can improve the separating efficiency of Cd. When the temperature is 1 173K, cadmium can evaporate completely from the samples during 3 h at 10 Pa. The reduction of pressure in a certain range is effective to the separating of Cd from Ni-Cd batteries by vacuum distillation.

  4. Electrical Characterization of Cu Composition Effects in CdS/CdTe Thin-Film Solar Cells with a ZnTe:Cu Back Contact: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Li, J. V.; Duenow, J. N.; Kuciauskas, D.; Kanevce, A.; Dhere, R. G.; Young, M. R.; Levi, D. H.

    2012-07-01

    We study the effects of Cu composition on the CdTe/ZnTe:Cu back contact and the bulk CdTe. For the back contact, its potential barrier decreases with Cu concentration while its saturation current density increases. For the bulk CdTe, the hole density increases with Cu concentration. We identify a Cu-related deep level at {approx}0.55 eV whose concentration is significant when the Cu concentration is high. The device performance, which initially increases with Cu concentration then decreases, reflects the interplay between the positive influences and negative influences (increasing deep levels in CdTe) of Cu.

  5. Analysis of CdS/CdTe devices incorporating a ZnTe:Cu/Ti Contact

    Energy Technology Data Exchange (ETDEWEB)

    Gessert, T.A. [National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, Colorado 80401 (United States)]. E-mail: tim_gessert@nrel.gov; Asher, S. [National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, Colorado 80401 (United States); Johnston, S. [National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, Colorado 80401 (United States); Young, M. [National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, Colorado 80401 (United States); Dippo, P. [National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, Colorado 80401 (United States); Corwine, C. [National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, Colorado 80401 (United States)

    2007-05-31

    High-performance CdS/CdTe photovoltaic devices can be produced using a ZnTe:Cu/Ti back contact deposited onto the CdTe layer. We observe that prolonged exposure of the ZnTe:Cu and Ti sputtering targets to an oxygen-containing plasma significantly reduces device open-circuit voltage and fill factor. High-resolution compositional analysis of these devices reveals that Cu concentration in the CdTe and CdS layers is lower for devices with poor performance. Capacitance-voltage analysis and related numerical simulations indicate that the net acceptor concentration in the CdTe is also lower for devices with poor performance. Photoluminescence analyses of the junction region reveal that the intensity of a luminescent peak associated with a defect complex involving interstitial Cu (Cu{sub i}) and oxygen on Te (O{sub Te}) is reduced in devices with poor performance. Combined with thermodynamic considerations, these results suggest that oxygen incorporation into the ZnTe:Cu sputtering target reduces the ability of sputtered ZnTe:Cu film to diffuse Cu into the CdTe.

  6. Size distribution effects of cadmium tellurium quantum dots (CdS/CdTe) immunotoxicity on aquatic organisms.

    Science.gov (United States)

    Bruneau, A; Fortier, M; Gagne, F; Gagnon, C; Turcotte, P; Tayabali, A; Davis, T L; Auffret, M; Fournier, M

    2013-03-01

    The increasing use of products derived from nanotechnology has raised concern about their potential toxicity to aquatic life. This study sought to examine the comparative immunotoxicity of capped cadmium sulphide/cadmium telluride (CdS/CdTe) quantum dots (QDs) and possible impact of particle/aggregate size on two bivalves (Mytilus edulis and Elliptio complanata) and a fish (Oncorhynchus mykiss). The QDs were dispersed in sterile water and fractionated using a series of micro/ultrafiltration membranes of decreasing pore size: 450 nm, 100 nm, 50 nm, 25 nm, 100 kDa (6.8 nm), 30 kDa (4.6 nm), 10 kDa (3.2 nm) and 1 kDa (1.5 nm). The total concentrations of cadmium and tellurium were determined for the filtered material and for that retained on the filters (retentate). The immunotoxicity was determined by measuring cell viability and phagocytosis. Results revealed that nanoparticles retained on the ultrafilters had a higher Cd/Te ratio compared to the permeate fraction (ratio of 5 and 2 respectively) which could indicate that the CdS core was not associated with the permeable fraction of Cd. Our results demonstrate that the toxicity of CdS/CdTe QDs was concentration and size dependent. Large CdS/CdTe QD aggregates (25 nm < size < 100 nm) reduced phagocytosis more than did smaller nanoparticles (<25 nm). Moreover, our results revealed that the different species responded differently to these fractions. Mytilus edulis hemocytes were less sensitive to CdS/CdTe QDs than the Oncorhynchus mykiss macrophage and Elliptio complanata hemocytes.

  7. Preparation of a new Cd(II)-imprinted polymer and its application to determination of cadmium(II) via flow-injection-flame atomic absorption spectrometry.

    Science.gov (United States)

    Gawin, Marta; Konefał, Jadwiga; Trzewik, Bartosz; Walas, Stanisław; Tobiasz, Anna; Mrowiec, Halina; Witek, Ewa

    2010-01-15

    A new cadmium(II)-imprinted polymer based on cadmium(II) 2,2'-{ethane-1,2-diylbis[nitrilo(E)methylylidene]} diphenolate-4-vinylpyridine complex was obtained via suspension polymerization. The beads were used as a minicolumn packing for flow-injection-flame atomic absorption spectrometry (FI-FAAS) determination of cadmium(II) in water samples. Sorption effectiveness was optimal within pH range of 6.6-7.7. Nitric acid, 0.5% (v/v) was used as eluent. Fast cadmium(II) sorption by the proposed material enabled to apply sample flow rates up to 10mLmin(-1) without loss in sorption effectiveness. Enrichment factor (EF), concentration efficiency (CE) and limit of detection (LOD, 3sigma) found for 120-s sorption time were 117, 39.1min(-1) and 0.11microgL(-1), respectively. Sorbent stability was proved for at least 100 preconcentration cycles (RSD=2.9%). When compared to non-imprinted polymer the new Cd(II)-imprinted polymer exhibited improved selectivity towards cadmium(II) against other heavy metal ions, especially Cu(II) and Pb(II), as well as light metal ions. Accuracy of the method was tested for ground water and waste water certified reference materials and fortified water. The method was applied to Cd(II) determination in natural water samples.

  8. Electro-Plating and Characterisation of CdTe Thin Films Using CdCl2 as the Cadmium Source

    Directory of Open Access Journals (Sweden)

    Nor A. Abdul-Manaf

    2015-09-01

    Full Text Available Cadmium telluride (CdTe thin films have been successfully prepared from an aqueous electrolyte bath containing cadmium chloride (CdCl2·H2O and tellurium dioxide (TeO2 using an electrodeposition technique. The structural, electrical, morphological and optical properties of these thin films have been characterised using X-ray diffraction (XRD, Raman spectroscopy, optical profilometry, DC current-voltage (I-V measurements, photoelectrochemical (PEC cell measurement, scanning electron microscopy (SEM, atomic force microscopy (AFM and UV-Vis spectrophotometry. It is observed that the best cathodic potential is 698 mV with respect to standard calomel electrode (SCE in a three electrode system. Structural analysis using XRD shows polycrystalline crystal structure in the as-deposited CdTe thin films and the peaks intensity increase after CdCl2 treatment. PEC cell measurements show the possibility of growing p-, i- and n-type CdTe layers by varying the growth potential during electrodeposition. The electrical resistivity of the as-deposited layers are in the order of 104 Ω·cm. SEM and AFM show that the CdCl2 treated samples are more roughness and have larger grain size when compared to CdTe grown by CdSO4 precursor. Results obtained from the optical absorption reveal that the bandgap of as-deposited CdTe (1.48–1.52 eV reduce to (1.45–1.49 eV after CdCl2 treatment. Full characterisation of this material is providing new information on crucial CdCl2 treatment of CdTe thin films due to its built-in CdCl2 treatment during the material growth. The work is progressing to fabricate solar cells with this material and compare with CdTe thin films grown by conventional sulphate precursors.

  9. Leaching of cadmium and tellurium from cadmium telluride (CdTe) thin-film solar panels under simulated landfill conditions.

    Science.gov (United States)

    Ramos-Ruiz, Adriana; Wilkening, Jean V; Field, James A; Sierra-Alvarez, Reyes

    2017-08-15

    A crushed non-encapsulated CdTe thin-film solar cell was subjected to two standardized batch leaching tests (i.e., Toxicity Characteristic Leaching Procedure (TCLP) and California Waste Extraction Test (WET)) and to a continuous-flow column test to assess cadmium (Cd) and tellurium (Te) dissolution under conditions simulating the acidic- and the methanogenic phases of municipal solid waste landfills. Low levels of Cd and Te were solubilized in both batch leaching tests (<8.2% and <3.6% of added Cd and Te, respectively). On the other hand, over the course of 30days, 73% of the Cd and 21% of the Te were released to the synthetic leachate of a continuous-flow column simulating the acidic landfill phase. The dissolved Cd concentration was 3.24-fold higher than the TCLP limit (1mgL(-1)), and 650-fold higher than the maximum contaminant level established by the US-EPA for this metal in drinking water (0.005mgL(-1)). In contrast, the release of Cd and Te to the effluent of the continuous-flow column simulating the methanogenic phase of a landfill was negligible. The remarkable difference in the leaching behavior of CdTe in the columns is related to different aqueous pH and redox conditions promoted by the microbial communities in the columns, and is in agreement with thermodynamic predictions. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Extracting Cu Diffusion Parameters in Polycrystalline CdTe

    Energy Technology Data Exchange (ETDEWEB)

    Akis, Richard [Arizona State Univeristy; Brinkman, Daniel [Arizona State Univeristy; Sankin, Igor [First Solar; Fang, Tian [First Solar; Guo, Da [Arizona State Univeristy; Dragica, Vasileska [Arizona State Univeristy; Ringhofer, Christian [Arizona State University

    2014-06-13

    It is well known that Cu plays an important role in CdTe solar cell performance as a dopant. In this work, a finite-difference method is developed and used to simulate Cu diffusion in CdTe solar cells. In the simulations, which are done on a two-dimensional (2D) domain, the CdTe is assumed to be polycrystal-line, with the individual grains separated by grain boundaries. When used to fit experimental Cu concentration data, bulk and grain boundary diffusion coefficients and activation energies for CdTe can be extracted. In the past, diffusion coefficients have been typically obtained by fitting data to simple functional forms of limited validity. By doing full simulations, the simplifying assumptions used in those analytical models are avoided and diffusion parameters can thus be determined more accurately.

  11. Cadmium triggers Elodea canadensis to change the surrounding water pH and thereby Cd uptake.

    Science.gov (United States)

    Javed, M Tariq; Greger, Maria

    2011-01-01

    This study was aimed to investigate the influence of Elodea canadensis shoots on surrounding water pH in the presence of cadmium and the effect of plant-induced pH on cadmium uptake. The pH change in the surrounding nutrient solution and Cd uptake by Elodea shoots were investigated after cultivation of various plant densities (1, 3, 6 plants per 500 ml) in hydroponics at a starting pH of 4.0 and in the presence of different concentrations of cadmium (0, 0.1, 0.5 microM). Cadmium uptake was also investigated at different constant pH (4.0, 4.5, 5.5 and 6.5). To investigate if the pH change arose from photosynthetic activities, plants were grown under light, darkness or in the presence of a photosynthetic inhibitor, 3-(3,4-dichlorophenyl)-1,1-dimethylurea (DCMU), and 0.5 microM cadmium in the solution. Elodea had an ability to increase the surrounding water pH, when the initial pH was low, which resulted in increased accumulation of Cd. The higher the plant density, the more pronounced was the pH change. The pH increase was not due to the photosynthetic activity since the pH rise was more pronounced under darkness and in the presence of DCMU. The pH increase by Elodea was triggered by cadmium.

  12. Recovery of cadmium by high-temperature vaccum evaporation from Ni-Cd batteries

    Institute of Scientific and Technical Information of China (English)

    朱建新; 李金惠; 聂永丰; 于波

    2003-01-01

    High-temperature vaccum evaporation is a recycling technology that includes a selective material recovering process. The fundamental research on a process of disassembling and recovering selected materials from Ni-Cd batteries was conducted using self-designed experimental apparatus. An effective recycling technology based on the evaporation phenomenon of batteries and the elements of cadmium under the laboratory condition was studied. The results show that: (1)Ni/Cd can be effectively recovered by vacuum distillation at appropriate temperature, pressure and time, and high purity cadmium (>99%) can be obtained through the process; (2)the effective distillatory temperature should be at the range of 573-1173K; (3)the higher the evaporation temperature, the lower the purity of cadmium in condensate metal

  13. A density functional theory study of Raman modes of cadmium hexathiohypodiphosphate (CdPS3

    Directory of Open Access Journals (Sweden)

    Shakoor Abdul

    2015-06-01

    Full Text Available Raman scattering investigations based on density functional theory (DFT calculations were performed to explore the vibrational modes of a cadmium hexathiohypodiphosphate CdPS3 single crystal. The calculations were performed to obtain the Raman spectra for the cadmium hexathiohypodiphosphate atoms to study the size dependence. Several vibrational modes indicating stretching and bending features related to Cd, S and P atoms were observed. Modifications of the frequency and intensity of different Raman modes with an increase in the number of atoms in CdPS3 were discussed in detail. Hydrogen atoms were added in order to make the closed shell configuration and saturate the CdPS3 as per the requisite for calculating the Raman spectra. This produced some additional modes of vibration related to hydrogen atoms. Band gap and formation energy were also calculated. The results generated are found to be in close agreement with the experimental values.

  14. Multi-metal interactions between Cd, Cu, Ni, Pb and Zn in water flea Daphnia magna, a stable isotope experiment.

    Science.gov (United States)

    Komjarova, I; Blust, R

    2008-11-11

    Metal interaction effects were investigated in Daphnia magna during a simultaneous exposure to essential (Cu, Ni and Zn) and non-essential (Cd and Pb) metals at environmentally relevant concentrations using a stable isotope technique. The metals were applied in the following concentration ranges: 0.0125-0.2 microM for (106)Cd, 0.025-0.25 microM for (65)Cu and (204)Pb, 0.1-1.25 microM for (62)Ni and (67)Zn. Cadmium and copper exhibited a suppressing effect on the uptake rates of all other metals present in the mixture with the exception to lead at all studied concentrations. The effect was already pronounced at low Cd and Cu concentrations and reached a maximum at the higher concentrations. Nickel and zinc showed weaker interactions with cadmium and between each other, while having no effect on copper and lead uptake. There was a high degree of correlation between Cd, Ni and Zn uptake rates indicating that these metals share in part common uptake or interaction pathways. Moreover, a significant correlation between Zn and Cu uptake processes suggests that more than one mechanism is involved in Zn accumulation since Cu is known to interact with Na uptake sites. The uptake of lead was marked by a high initial rate, but the uptake process reached saturation within 24 h. Cd applied at a concentration of 0.2 microM was the only metal which affected the lead uptake process by stimulation of the Pb uptake. Added to the medium at a concentration of 0.25 microM, lead in turn, increased copper uptake. Current work illustrates that metal interactions are significant and occur at low environmentally realistic concentrations affecting bioavailability of both toxic and essential metals.

  15. Effect of heavy metals (Cu, Cd and Pb) on aspartate and alanine aminotransferase in Ruditapes philippinarum (Mollusca: Bivalvia)

    Energy Technology Data Exchange (ETDEWEB)

    Blasco, J.; Puppo, J. [Instituto de Ciencias Marinas de Andalucia, Campus Univ. Rio S. Pedro, 11510 Puerto Real, Cadiz (Spain)

    1999-02-01

    The accumulation of cadmium, copper and lead and their effects on aspartate and alanine aminotransferases in digestive gland, gills, foot and soft body in the clam Ruditapes philippinarum were examined. The animals were exposed to different concentrations: Cd (200-600 {mu}g{center_dot}l{sup -1}), Pb (350-700 {mu}g{center_dot}l{sup -1}) and Cu (10-20 {mu}g{center_dot}l{sup -1}) for 7 days. The highest concentrations were found in digestive gland for cadmium and copper, and in gills for lead, and the lowest values were observed in the foot. Aspartate aminotransferase activity (AST), in general, was not inhibited by cadmium, lead or copper during the exposure. Only in clams exposed to cadmium (600 {mu}g{center_dot}l{sup -1}, 7 days) and copper (20 {mu}g{center_dot}l{sup -1}, 5 days) were observed significant differences (P<0.05) in foot and gills, respectively, with respect to control. In the case of alanine aminotransferase activity (ALT), significant differences were observed for cadmium and lead in treated animals with respect to control. With regard to copper, a decrease in ALT was observed in gills and foot exposed to 20 {mu}g{center_dot}l{sup -1}. A significant correlation (P<0.05) was observed between ALT and metal accumulation for cadmium, copper and lead in gills. In the case of soft body, only cadmium and lead showed a significant correlation. In summary, R. philippinarum can be considered a bioindicator species for cadmium and lead accumulation and ALT could be useful as biomarker of sublethal stress for these metals in soft tissues and gills. Only gills can be considered an adequate target tissue for copper. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

  16. Evolution of oxygenated cadmium sulfide (CdS:O) during high-temperature CdTe solar cell fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Meysing, Daniel M.; Reese, Matthew O.; Warren, Charles W.; Abbas, Ali; Burst, James M.; Mahabaduge, Hasitha P.; Metzger, Wyatt K.; Walls, John M.; Lonergan, Mark C.; Barnes, Teresa M.; Wolden, Colin A.

    2016-12-01

    Oxygenated cadmium sulfide (CdS:O) produced by reactive sputtering has emerged as a promising alternative to conventional CdS for use as the n-type window layer in CdTe solar cells. Here, complementary techniques are used to expose the window layer (CdS or CdS:O) in completed superstrate devices and combined with a suite of materials characterization to elucidate its evolution during high temperature device processing. During device fabrication amorphous CdS:O undergoes significant interdiffusion with CdTe and recrystallization, forming CdS1-yTey nanocrystals whose Te fraction approaches solubility limits. Significant oxygen remains after processing, concentrated in sulfate clusters dispersed among the CdS1-yTey alloy phase, accounting for ~30% of the post-processed window layer based on cross-sectional microscopy. Interdiffusion and recrystallization are observed in devices with un-oxygenated CdS, but to a much lesser extent. Etching experiments suggest that the CdS thickness is minimally changed during processing, but the CdS:O window layer is reduced from 100 nm to 60-80 nm, which is confirmed by microscopy. Alloying reduces the band gap of the CdS:O window layer to 2.15 eV, but reductions in thickness and areal density improve its transmission spectrum, which is well matched to device quantum efficiency. The changes to the window layer in the reactive environments of device fabrication are profoundly different than what occurs by thermal annealing in an inert environment, which produced films with a band gap of 2.4 eV for both CdS and CdS:O. These results illustrate for the first time the significant changes that occur to the window layer during processing that are critical to the performance of CdTe solar cells.

  17. ANALISIS KONSENTRASI MERKURI (Hg DAN CADMIUM (Cd DI MUARA SUNGAI PORONG SEBAGAI AREA BUANGAN LIMBAH LUMPUR LAPINDO

    Directory of Open Access Journals (Sweden)

    R Rachmawatie

    2009-10-01

    Full Text Available Tujuan riset ini adalah untuk meneliti konsentrasi Merkuri ( Hg dan Cadmium ( Cd di  muara Sungai Porong serta menentukan tingkat pencemaran logam berat di area tersebut. Analisa statistic yang digunakan adalah  ANOVA  dan analisis regresi yang digunakan untuk menguji hubungan logam berat yang terdeteksi dengan parameter penunjang. Hasil penelitian menunjukkan konsentrasi Cd telah melewati batasan normal di area muara. Disamping itu, Merkuri (Hg tidak terdeteksi. Rata-Rata konsentrasi Cd dari 9 stasiun adalah 0,025 - 0,075 mg/liter. Hasil ANOVA menunjukkan rata-rata konsentrasi Cadmium (Cd dari seluruh stasiun pengamatan  adalah berbeda nyata (p < 0,05. Selanjutnya, analisis regresi menunjukkan bahwa model regresi dapat menjelaskan hubungan konsentrasi logam berat Cadmium (Cd dengan beberapa parameter kualitas air  ( R2 < 70%. Kata Kunci :  Cadmium, Merkuri, muara Sungai Porong

  18. Magnum(R) NiCd advanced nickel-cadmium battery cells

    Science.gov (United States)

    Scoles, Darren

    1995-01-01

    The Power Systems Department of Eagle-Picher Industries, Inc., located in Colorado Springs, Colorado, had developed a long-life advanced Nickel-Cadmium battery cell for aerospace applications. This battery cell, known as the MAGNUM NiCd cell, offers significant life expectancy increase over traditional NiCd battery cells. In addition, it offers significant cost reduction from the Super NiCd battery cell (developed by Hughes Aircraft Company and manufactured by the Power Systems Department of Eagle-Picher Industries, Inc.).

  19. Antioxidant response of Phragmites australis to Cu and Cd contamination.

    Science.gov (United States)

    Rocha, A Cristina S; Almeida, C Marisa R; Basto, M Clara P; Vasconcelos, M Teresa S D

    2014-11-01

    Metals are known to induce oxidative stress in plant cells. Antioxidant thiolic compounds are known to play an important role in plants׳ defence mechanisms against metal toxicity but, regarding salt marsh plants, their role is still very poorly understood. In this work, the involvement of non-protein thiols (NPT), such as cysteine (Cys), reduced glutathione (GSH), oxidised glutathione (GSSG) and total acid-soluble SH compounds (total thiols), in the tolerance mechanisms of the marsh plant Phragmites australis against Cu and Cd toxicity was assessed. Specimens of this plant, freshly harvested in an estuarine salt marsh, were exposed, for 7 days, to rhizosediment soaked with the respective elutriate contaminated with Cu (0, 10 and 100 mg/L) or Cd (0, 1, 10 mg/L). In terms of NPT production, Cu and Cd contamination induced different responses in P. australis. The content of Cys increased in plant tissue after plant exposure to Cu, whereas Cd contamination led to a decrease in GSSG levels. In general, metal contamination did not cause a significant variation on GSH levels. Both metals influenced, to some extent, the production of other thiolic compounds. Despite the accumulation of considerable amounts of Cu and Cd in belowground tissues, no visible toxicity signs were observed. So, antioxidant thiolic compounds were probably involved in the mechanisms used by P. australis to alleviate metal toxicity. As P. australis is considered suitable for phytostabilising metal-contaminated sediments, understanding its tolerance mechanisms to toxic metals is important to optimise the conditions for applying this plant in phytoremediation procedures.

  20. Cd-Resistant Strains of B. cereus S5 with Endurance Capacity and Their Capacities for Cadmium Removal from Cadmium-Polluted Water.

    Science.gov (United States)

    Wu, Huiqing; Wu, Qingping; Wu, Guojie; Gu, Qihui; Wei, Linting

    2016-01-01

    The goal of this study was to identify Cd-resistant bacterial strains with endurance capacity and to evaluate their ability to remove cadmium ions from cadmium-polluted water. The Bacillus cereusS5 strain identified in this study had the closest genetic relationship with B. cereus sp. Cp1 and performed well in the removal of Cd2+ions from solution. The results showed that both the live and dead biomasses of the Cd2+-tolerant B. cereus S5 strain could absorb Cd2+ ions in solution but that the live biomass of the B. cereus S5 strain outperformed the dead biomass at lower Cd2+concentrations. An analysis of the cadmium tolerance genes of B. cereus S5 identified ATPase genes that were associated with cadmium tolerance and involved in the ATP pumping mechanism. The FTIR spectra revealed the presence of amino, carboxyl and hydroxyl groups on the pristine biomass and indicated that the cadmium ion removal ability was related to the structure of the strain. The maximum absorption capacity of the B. cereus S5 strain in viable spore biomass was 70.16 mg/g (dry weight) based on a pseudo-second-order kinetic model fit to the experimental data. The Langmuir and Langmuir-Freundlich isotherm adsorption models fit the cadmium ion adsorption data well, and the kinetic curves indicated that the adsorption rate was second-order. For Cd2+ concentrations (mg/L) of 1-109 mg/L, good removal efficiency (>80%) was achieved using approximately 3.48-10.3 g/L of active spore biomass of the B. cereus S5 strain. A cadmium-tolerant bacteria-activated carbon-immobilized column could be used for a longer duration and exhibited greater treatment efficacy than the control column in the treatment of cadmium-polluted water. In addition, a toxicity assessment using mice demonstrated that the biomass of the B. cereus S5 strain and its fermentation products were non-toxic. Thus, the isolated B. cereus S5 strain can be considered an alternative biological adsorbent for use in emergency responses to severe

  1. Distributions of dissolved trace metals (Cd, Cu, Mn, Pb, Ag in the southeastern Atlantic and the Southern Ocean

    Directory of Open Access Journals (Sweden)

    M. Boye

    2012-03-01

    Full Text Available Comprehensive synoptic datasets (surface water down to 4000 m of dissolved cadmium (Cd, copper (Cu, manganese (Mn, lead (Pb and silver (Ag are presented along a section between 34° S and 57° S in the southeastern Atlantic Ocean and the Southern Ocean to the south off South Africa. The vertical distributions of Cu, Ag, and of Cd display nutrient-like profiles similar to silicic acid, and phosphate, respectively. The distribution of Mn shows a subsurface maximum in the oxygen minimum zone, whereas Pb concentrations are rather invariable with depth. Dry deposition of aerosols is thought to be an important source of Pb to surface waters close to South Africa, and dry deposition and snowfall may have been significant sources of Cu and Mn at the higher latitudes. Furthermore, the advection of water-masses enriched in trace metals following contact with continental margins appeared to be an important source of trace elements to the surface, intermediate and deep waters in the southeastern Atlantic Ocean and the Antarctic Circumpolar Current. Hydrothermal inputs appeared to have formed a source of trace metals to the deep waters over the Bouvet Triple Junction ridge crest, as suggested by relatively enhanced dissolved Mn concentrations. The biological utilization of Cu and Ag was proportional to that of silicic acid across the section, suggesting that diatoms formed an important control over the removal of Cu and Ag from surface waters. However uptake by dino- and nano-flagelattes may have influenced the distribution of Cu and Ag in the surface waters of the subtropical Atlantic domain. Cadmium correlated strongly with phosphate (P, yielding lower Cd/P ratios in the subtropical surface waters where phosphate concentrations were below 0.95 μM. The greater depletion of Cd relative to P observed in the Weddell Gyre compared to the Antarctic Circumpolar Current could be due to increase Cd-uptake induced by iron-limiting conditions in these High

  2. Cu-doped CdS and its application in CdTe thin film solar cell

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Yi [School of Automation, Wuhan University of Technology, Wuhan, Hubei 430070 (China); College of Electronic and Information Engineering, Hankou University, Wuhan, Hubei 430212 (China); Yang, Jun; Yang, Ruilong; Shen, Kai; Wang, Dezhao [Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, Anhui 230026 (China); Wang, Deliang, E-mail: eedewang@ustc.edu.cn [Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, Anhui 230026 (China); Key Laboratory of Materials for Energy Conversion, University of Science and Technology of China, Hefei, Anhui 230026 (China)

    2016-01-15

    Cu is widely used in the back contact formation of CdTe thin film solar cells. However, Cu is easily to diffuse from the back contact into the CdTe absorber layer and even to the cell junction interface CdS/CdTe. This phenomenon is generally believed to be the main factor affecting the CdTe solar cell stability. In this study Cu was intentionally doped in CdS thin film to study its effect on the microstructural, optical and electrical properties of the CdS material. Upon Cu doping, the V{sub Cd{sup −}} and the surface-state-related photoluminescence emissions were dramatically decreased/quenched. The presence of Cu atom hindered the recrystallization/coalescence of the nano-sized grains in the as-deposited CdS film during the air and the CdCl{sub 2} annealing. CdTe thin film solar cell fabricated with Cu-doped CdS window layers demonstrated much decreased fill factor, which was induced by the increased space-charge recombination near the p-n junction and the worsened junction crystalline quality. Temperature dependent current-voltage curve measurement indicated that the doped Cu in the CdS window layer was not stable at both room and higher temperatures.

  3. [The role of Cd-binding proteins and phytochelatins in the formation of cadmium resistance in Nicotiana plumbaginifolia cell lines].

    Science.gov (United States)

    Fenik, S I; Solodushko, V G; Kaliniak, T B; Blium, Ia B

    2007-01-01

    Nicotiana plumbaginifolia callus lines with the equal resistance to cadmium have been produced under different selective conditions--either without inhibition of the phytochelatin synthesis (line Cd-R) or in the presence of the inhibitor butionine sulfoximine (line Cd-Ri). The level of phytochelatin synthesis in the line Cd-R five-fold exceeded the control value and in the line Cd-Ri it was twice as much as in the control. It was shown that in the control line mainly three cadmium-binding proteins are expressed of the molecular weihgts 41, 34 and 19 kD. The common feature of the both resistant lines is the expression of the cadmium-binding proteins of 40, 37 and 19 kD. The resistant lines differ with respect to the synthesis of relatively low-molecular cadmium-binding proteins. The proteins of the molecular weights 12.5, 11.5 and 9 kD are expressed in the line Cd-R, while the proteins of 13 and 10 kD are expressed in the line Cd-Ri. It was supposed that both the phytochelatins and the Cd-binding proteins contribute to the resisitance of N. plumbaginifolia callus lines to cadmium and the lack of the phytochelatins can be equilibrated by the changes in the low-molecular Cd-binding protein synthesis.

  4. Cadmium accumulation and biochemical responses in Sparus aurata following sub-lethal Cd exposure.

    Science.gov (United States)

    Isani, G; Andreani, G; Cocchioni, F; Fedeli, D; Carpené, E; Falcioni, G

    2009-01-01

    Cadmium (Cd), a heavy metal with limited biological function, is widely distributed in the aquatic environment as a result of natural and anthropogenic activities. The effect of 4 and 11 days exposure of gilthead sea bream Sparus aurata to sub-lethal concentrations of Cd was evaluated as levels of Cd content and Cd-metallothionein (MT) presence in different organs. The possible genotoxic effect was also evaluated in erythrocytes by using the "comet assay", a promising tool for estimating DNA damage at the single-cell level. The results obtained show that in the controls, Cd content was significantly higher in gills compared to in liver, but the treatment of fish with 0.1mg/l Cd induced a stronger accumulation of metal in liver depending on the length of the exposure period. Cd traces were found in plasma, muscle and kidney. Cd forms complexes in the cytosol with MT only in the liver but Cd-MT content significantly increased after 11 days of exposure to the metal, while after 4 days of treatment the protein level was similar to the control. The "comet assay" performed on S. aurata eryhtrocytes isolated from fish treated for 4 and 11 days with 0.1mg/l Cd, showed that there was no DNA damage at both exposure periods.

  5. Construction and optical properties of infinite Cd and finite Cu molecules stairs

    Science.gov (United States)

    Zhao, Qiang; Mao, Wutao; Shen, Zhi; Wang, Qinghong; Zhou, Qian

    2017-02-01

    Two coordination complexes, namely [(hpdq)(pta)Cd]n (1) and [(pptp)(pta)Cu2Cl] (2) have been synthesized by solvothermal method based on two polypyridyl ligands, 2,3,6,7,10,11-hexakis- (2-pyridyl)dipyrazino[2,3-f:2‧,3‧-h]quinoxaline) (hpdq), 4‧-(4- (3H-pyrrol-3-yl)phenyl)- 2,2‧:6‧,2″- terpyridine (pptp) and auxiliary ligand p-phthalic acid (pta), respectively. Single crystal x-ray diffraction analyses reveal that complexes 1 and 2 assembled based on distinct asymmetric unit comprising one and two respective polypyridyl ligands but one Cd(II) and two Cu(I)ions, respectively. Among them, The asymmetric units in 1 was extended to one dimensional chain via the link of auxiliary ligand pta, just like infinite layers of stairs that connected by cadmium ions as the node. While that in 2 to Zero dimensional tetranuclear structure via the link of auxiliary ligand pta, just like finite four layers of stairs that Copper ion as the node connection. Furthermore, solid fluorescence spectra properties of two complexes were also investigated, and the result shows the fluorescence intensity of complex 1 is stronger than that of the hpdq ligand, but the fluorescence intensity of complex 2 is weaker than that of the pptp ligand. CCDC number of 1and 2 are 1483301 and 1483302.

  6. Experimental and modeling of the electrodialytic and dialytic treatment of a fly ash containing Cd, Cu and Pb

    DEFF Research Database (Denmark)

    Lima, A.T.; Ribeiro, A.B.; Rodriguez-Maroto, J.M.

    2010-01-01

    A one-dimensional model is developed for simulating the electrodialytic and dialytic treatment of a fly ash containing cadmium, copper and lead. Two experimental systems have been used, a column of ash and a stirred ash suspension. The movement of Cd, Cu and Pb has been modeled taking into account...... ionic species in the system, H+ and OH-, proceeding of the electrolysis at the electrodes, Ca2+, CO3 (=), SO4 (=), etc. proceeding from the ash and Na+ and NO3 (-), or citrate and ammonium ions incorporated as electrolyte solutions and/or as agent solution during the ash treatment. The simulation also...

  7. Removal of Pb, Cu, Cd, and Zn Present in Aqueous Solution Using Coupled Electrocoagulation-Phytoremediation Treatment

    Directory of Open Access Journals (Sweden)

    Francisco Ferniza-García

    2017-01-01

    Full Text Available This study presents the results of a coupled electrocoagulation-phytoremediation treatment for the reduction of copper, cadmium, lead, and zinc, present in aqueous solution. The electrocoagulation was carried out in a batch reactor using aluminum electrodes in parallel arrangement; the optimal conditions were current density of 8 mA/cm2 and operating time of 180 minutes. For phytoremediation the macrophytes, Typha latifolia L., were used during seven days of treatment. The results indicated that the coupled treatment reduced metal concentrations by 99.2% Cu, 81.3% Cd, and 99.4% Pb, while Zn increased due to the natural concentrations of the plant used.

  8. Effects of Surface Charge and Functional Groups on the Adsorption and Binding Forms of Cu and Cd on Roots of indica and japonica Rice Cultivars

    Directory of Open Access Journals (Sweden)

    Zhao-Dong Liu

    2017-08-01

    Full Text Available This work was designed to understand the mechanisms of adsorption of copper (Cu and cadmium (Cd on roots of indica and japonica varieties of rice. Six varieties each of indica and japonica rice were grown in hydroponics and the chemical properties of the root surface were analyzed, including surface charges and functional groups (-COO- groups as measured by the streaming potential and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR. Binding forms of heavy metals adsorbed on rice roots were identified using sequential extraction methods. In rice roots exposed to Cu and Cd solutions, Cu existed mainly in both exchangeable and complexed forms, whereas Cd existed mainly in the exchangeable form. The amounts of exchangeable Cu and Cd and total adsorbed metal cations on the roots of indica varieties were significantly greater than those on the roots of japonica varieties, and the higher negative charges and the larger number of functional groups on the roots of indica varieties were responsible for their higher adsorption capacity and greater binding strength for Cu and Cd. Surface charge and functional groups on roots play an important role in the adsorption of Cu and Cd on the rice roots.

  9. Alleviating effects of exogenous NO on tomato seedlings under combined Cu and Cd stress.

    Science.gov (United States)

    Wang, Yi-Jun; Dong, Yu-Xiu; Wang, Juan; Cui, Xiu-Min

    2016-03-01

    To investigate the effect of NO on the different origin and regulation of oxidative stress of Cu and/or Cd, tomato seedlings were treated with Cu, Cd, or Cu + Cd in a nutrient solution culture system. The main effect of Cu(2+) was a significant reduction in root activity and nitrate reductase (NR) activity, which was similar to that under 50 μM Cd treatment, but promoted Cu accumulation. The supply of Cu under Cd treatment decreased Cd concentration, while not altered Cu concentration by contrast with Cu treatment, which is suggestive of a replacement of Cu(2+) with Cd(2+) and effective decrease in the boiotoxicity of 50 μM Cd(2+) to tomato seedlings. However, NO alleviated the restriction to NR activity significantly and made the biomass of tomato seedlings recover under Cd treatment, and also increased root activity under Cu and Cu + Cd treatment. Exogenous NO markedly reduced the absorption and transportation of Cu but did not obviously change the translocation of Cd to the aboveground parts under Cu + Cd treatment. Both metals induced lipid peroxidation via the decreasing activation of antioxidant enzymes. The antioxidant enzyme system worked differently under Cu, Cd, or Cu + Cd stress. The activities of peroxidase (POD) and catalase (CAT) were higher under single Cd stress than under the control. Meanwhile, Cu + Cd treatment decreased the activities of POD, superoxide dismutase (SOD), and ascorbic acid peroxidase (APX). Exogenous NO increased POD and SOD activities in the leaves and roots, and CAT activity in the roots under combined Cu and Cd stress. These results suggest that a different response and regulation mechanism that involves exogenous NO is present in tomato seedlings under Cu and Cd stress.

  10. Determination of mobile form contents of Zn, Cd, Pb and Cu in soil extracts by combined stripping voltammetry

    Energy Technology Data Exchange (ETDEWEB)

    Nedeltcheva, T. [Department of Analytical Chemistry, University of Chemical Technology and Metallurgy, 8 Kl. Ohridsi Blvd., 1756 Sofia (Bulgaria)]. E-mail: nedel@uctm.edu; Atanassova, M. [Department of Analytical Chemistry, University of Chemical Technology and Metallurgy, 8 Kl. Ohridsi Blvd., 1756 Sofia (Bulgaria); Dimitrov, J. [N. Pushkarov Institute of Soil Science and Agroecology, 7 Shosse Bankya St., 1080 Sofia (Bulgaria); Stanislavova, L. [N. Pushkarov Institute of Soil Science and Agroecology, 7 Shosse Bankya St., 1080 Sofia (Bulgaria)

    2005-01-10

    The amount of mobile forms of Zn, Pb, Cd and Cu in extracts obtained by treating soil samples with ammonium nitrate were determined by an appropriate combination of anodic and cathodic stripping voltammetry with hanging mercury drop electrode. Every analysis required three mercury drops: on the first one, zinc was determined; on the second, cadmium and lead; on the third, copper was determined. Zinc, lead and cadmium were determined by conventional differential-pulse anodic stripping voltammetry. For copper determination, adsorptive differential-pulse cathodic stripping voltammetry with amalgamation using chloride ions as a complexing agent was applied. The standard deviation of the results was from 1 to 10% depending on the metal content in the sample. Voltammetric results were in good agreement with the AAS analysis. No microwave digestion of soil extracts was necessary.

  11. An in vitro model for the in vivo mobilization of cadmium by chelating agents using 113Cd-NMR spectroscopy.

    Science.gov (United States)

    Beaty, J A; Jones, M M; Wilson, D J; Ma, L

    1992-01-01

    An in vitro method, based on 113Cd-NMR spectroscopy, that provides an alternative to the use of animals for an initial screening of cadmium antagonists is presented. The relative values of the effective stability constants of potential chelating antagonists for cadmium are estimated by using 113Cd-NMR spectroscopy to determine the concentrations of the cadmium species involved in appropriate competitive equilibria. This is accomplished via an examination of the competition between the proposed antagonist and EDTA (ethylenediaminetetraacetic acid) for cadmium-113; previously, EDTA has been shown to be capable of removing cadmium from such in vivo binding sites as metallothionein. The reactions proceed via the stepwise addition of three dithiocarbamate groups to the cadmium accompanied by the concurrent stepwise release of donor groups from the EDTA. The resulting 113Cd-NMR data allow for the determination of the overall stability constant for the complex formed between cadmium and N-methyl-D-glucamine dithiocarbamate, iminodiacetic acid dithiocarbamate, proline dithiocarbamate, sarcosine dithiocarbamate. The use of 113Cd-NMR spectroscopy has the potential for providing direct evidence on the effectiveness of chelate antagonists to compete with endogenous ligands for other toxic metal ions. This technique could prove very useful for other compounds that are not stable enough toward acid and/or base to be examined by standard titrimetric methods.

  12. Cu-doped CdS and its application in CdTe thin film solar cell

    Science.gov (United States)

    Deng, Yi; Yang, Jun; Yang, Ruilong; Shen, Kai; Wang, Dezhao; Wang, Deliang

    2016-01-01

    Cu is widely used in the back contact formation of CdTe thin film solar cells. However, Cu is easily to diffuse from the back contact into the CdTe absorber layer and even to the cell junction interface CdS/CdTe. This phenomenon is generally believed to be the main factor affecting the CdTe solar cell stability. In this study Cu was intentionally doped in CdS thin film to study its effect on the microstructural, optical and electrical properties of the CdS material. Upon Cu doping, the VCd- and the surface-state-related photoluminescence emissions were dramatically decreased/quenched. The presence of Cu atom hindered the recrystallization/coalescence of the nano-sized grains in the as-deposited CdS film during the air and the CdCl2 annealing. CdTe thin film solar cell fabricated with Cu-doped CdS window layers demonstrated much decreased fill factor, which was induced by the increased space-charge recombination near the p-n junction and the worsened junction crystalline quality. Temperature dependent current-voltage curve measurement indicated that the doped Cu in the CdS window layer was not stable at both room and higher temperatures.

  13. Cu-doped CdS and its application in CdTe thin film solar cell

    Directory of Open Access Journals (Sweden)

    Yi Deng

    2016-01-01

    Full Text Available Cu is widely used in the back contact formation of CdTe thin film solar cells. However, Cu is easily to diffuse from the back contact into the CdTe absorber layer and even to the cell junction interface CdS/CdTe. This phenomenon is generally believed to be the main factor affecting the CdTe solar cell stability. In this study Cu was intentionally doped in CdS thin film to study its effect on the microstructural, optical and electrical properties of the CdS material. Upon Cu doping, the VCd− and the surface-state-related photoluminescence emissions were dramatically decreased/quenched. The presence of Cu atom hindered the recrystallization/coalescence of the nano-sized grains in the as-deposited CdS film during the air and the CdCl2 annealing. CdTe thin film solar cell fabricated with Cu-doped CdS window layers demonstrated much decreased fill factor, which was induced by the increased space-charge recombination near the p-n junction and the worsened junction crystalline quality. Temperature dependent current-voltage curve measurement indicated that the doped Cu in the CdS window layer was not stable at both room and higher temperatures.

  14. Ion Exchange Processed CdS Nanorods in Powder Form Using Cadmium Hydroxide Nanowires By Wet Chemical Route

    Directory of Open Access Journals (Sweden)

    Savita L. Patil

    2010-06-01

    Full Text Available Simple, inexpensive and soft chemical route (wet chemical method was employed for the synthesis of bulk forms of cadmium hydroxide [Cd(OH2] nanowires bundles and their conversion to cadmium sulphide [CdS] nanorods at room temperature by simple anion exchange route. Due to difference in solubility product and diffusion rates of the Cd(OH2 and CdS, the anion exchange reaction was taken place and CdS nanorods were formed. CdS nanorods were characterized by X-ray diffraction (XRD, and scanning electron microscopy (SEM, energy-dispersive X-ray (EDX analysis. Since CdS is semi-conducting material, it has variety of potential applications, this work demonstrates a cost effective method for the synthesis of CdS nanorods in bulk form like CNT.

  15. Optical absorption, induced bleaching, and photoluminescence of CdSe nanoplatelets grown in cadmium octanoate matrix

    Science.gov (United States)

    Lyashchova, Alina; Dmytruk, Andriy; Dmitruk, Igor; Klimusheva, Gertruda; Mirnaya, Tetyana; Asaula, Vitaliy

    2014-02-01

    CdSe nanoparticles (NPs) are chemically synthesized in thermotropic ionic liquid crystalline (LC) phase of cadmium octanoate that was used as a nanoreactor. The nanocomposite samples are obtained by the rapid cooling of the LC phase to room temperature. Observed doublet structure in absorption spectra of the nanocomposites is characteristic for the two-dimensional CdSe nanoplatelets (NPLs). The thicknesses of the CdSe NPLs are 1.6, 1.9 and 2.3 nm as determined from the absorption spectra, and correspond to 4, 5 and 6 CdSe monolayers, respectively. Induced simultaneous bleaching of the doublet components observed under femtosecond laser excitation, as well as photoluminescence spectra and their kinetics are found compatible with the model of excitons with heavy- and light-hole valence bands confined in nanoplatelets.

  16. Cadmium-zinc accumulation and photosystem II responses of Noccaea caerulescens to Cd and Zn exposure.

    Science.gov (United States)

    Bayçu, Gülriz; Gevrek-Kürüm, Nurbir; Moustaka, Julietta; Csatári, István; Rognes, Sven Erik; Moustakas, Michael

    2017-01-01

    A population of the metallophyte Noccaea (Thlaspi) caerulescens originating from a Zn-enriched area at Røros Copper Mine (Norway) was studied. N. caerulescens tolerance to accumulate Cd and Zn was evaluated in hydroponic experiments by chlorophyll fluorescence imaging analysis. In the field-collected N. caerulescens mother plants, Zn shoot concentrations were above Zn hyperaccumulation threshold while, in hydroponic experiments under 40-μM Cd exposure, shoot Cd concentrations were clearly above Cd hyperaccumulation threshold. Cadmium ions and, to a less extent, Zn were mainly retained in the roots. Exposure to Cd enhanced Zn translocation to the shoot, while decreased significant total Ca(2+) uptake, suggesting that Cd uptake occurs through Ca(2+) transporters. Nevertheless, it increased Ca(2+) translocation to the leaf, possibly for photoprotection of photosystem II (PSII). Exposure to 800 μM Zn or 40 μM Cd resulted in increased Fe(3+) uptake suggesting that in N. caerulescens, Cd uptake does not take place through the pathway of Fe(3+) uptake and that conditions that lead to Cd and Zn accumulation in plants may also favor Fe accumulation. Despite the significant high toxicity levels of Zn and Cd in leaves, under Zn and Cd exposure, respectively, the allocation of absorbed light energy at PSII did not differ compared to controls. The results showed that N. caerulescens keep Cd and Zn concentrations in the mesophyll cells in non-toxic forms for PSII and that the increased Ca and Fe accumulation in leaves alleviates the toxicity effects. Chlorophyll fluorescence imaging revealed that PSII of N. caerulescens resisted better the phytotoxic effects of 20 times higher Zn than Cd exposure concentration. Overall, it is concluded that the use of chlorophyll fluorescence imaging constitutes a promising basis for investigating heavy metal tolerance of plants.

  17. Cadmium (Cd) distribution and contamination in Chinese paddy soils on national scale.

    Science.gov (United States)

    Liu, Xiaojuan; Tian, Guangjin; Jiang, Dong; Zhang, Chi; Kong, Lingqiang

    2016-09-01

    Rice is a staple food by an increasing number of people in China. As more issues have arisen in China due to rice contaminated by cadmium (Cd), Cd contamination in arable soils has become a severe problem. In China, many studies have examined Cd contamination in arable soils on a national scale, but little studies have focused on the distribution of Cd in paddy fields. This study explored the spatial pattern of Cd in paddy soils in China, made a preliminary evaluation of the potential risk, and identified the most critically contaminated regions based on the domestic rough rice trade flow. The results showed that Cd concentrations in paddy soils in China ranged from 0.01 to 5.50 mg/kg, with a median value of 0.23 mg/kg. On average, the highest Cd concentrations were in Hunan (0.73 mg/kg), Guangxi (0.70 mg/kg), and Sichuan (0.46 mg/kg) provinces. Cd concentrations in paddy soils in central and western regions were higher than those in eastern regions, especially the southeastern coastal regions. Of the administrative regions, Cd standard exceedance rate was 33.2 %, and the heavy pollution rate was 8.6 %. Regarding to Cd of paddy soil, soil environmental quality was better in Northeast China Plain than in Yangtze River Basin and southeastern coastal region. Mining activities were the main anthropogenic pollution source of Cd in Chinese paddy soil. Based on rice trade, more of the Chinese population would be exposed to Cd through intake of rice produced in Hunan province. Certain regions that output rice, especially Hunan province, should be given priority in the management and control of Cd contamination in paddy soil.

  18. Cu and Cd Adsorption on Carbon Aerogel and Xerogel

    Directory of Open Access Journals (Sweden)

    Cotet L. C.

    2013-04-01

    Full Text Available Carbon aerogel (CA and xerogel (CX were proposed as new carbon adsorbent materials for Cu and Cd ions from contaminated water (synthetic water samples. These materials were prepared by a sol-gel process that involves a polycondensation of resorcinol and formaldehyde in Na2CO3 catalysis, followed by a drying step, either in supercritical conditions of CO2 to aerogel obtaining or in normal conditions to xerogel obtaining, and a pyrolytic step. Nitrogen adsorption, AFM, SEM, TEM and XRD were used for morpho-structural adsorbent investigation. Cu and Cd ions adsorption experiments were carried out in batch conditions under magnetic stirring. Adsorbent quantity and grain size influence over the adsorption efficiency were considered. Adsorption results expressed as adsorption capacities showed that prepared CA is a better adsorbent than CX. Adsorption capacities up to 14.2 mg g-1 and 8.5 mg g-1 were obtained for Cd2+ and Cu2+ adsorption on CA, respectively.

  19. Cadmium

    Energy Technology Data Exchange (ETDEWEB)

    Stoeppler, M. (Kernforschungsanlage Juelich G.m.b.H. (Germany, F.R.). Inst. fuer Angewandte Physikalische Chemie); Piscator, M. (Karolinska Inst., Stockholm (Sweden). Dept. of Environmental Hygiene) (eds.)

    1988-01-01

    The proceedings contain the 18 papers presented at the workshop. They are dealing with the following themes: Toxicity, carcinogenesis and metabolism of cadmium, epidemiology; environmental occurrence; quantitative analysis and quality assessment. (MG) With 57 figs., 79 tabs.

  20. Development of radiopure cadmium tungstate crystal scintillators from enriched {sup 106}Cd and {sup 116}Cd to search for double beta decay

    Energy Technology Data Exchange (ETDEWEB)

    Danevich, F. A.; Boiko, R. S.; Chernyak, D. M.; Kobychev, V. V.; Kropivyansky, B. N.; Mokina, V. M.; Nikolaiko, A. S.; Poda, D. V.; Podviyanuk, R. B.; Tretyak, V. I. [Institute for Nuclear Research, Kyiv (Ukraine); Barabash, A. S.; Konovalov, S. I.; Umatov, V. I. [Institute of Theoretical and Experimental Physics, Moscow (Russian Federation); Belli, P.; Bernabei, R.; D' Angelo, S. [INFN, Section of Rome Tor Vergata, Rome, Italy and Department of Physics, University of Rome Tor Vergata, Rome (Italy); Brudanin, V. B. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Cappella, F.; Incicchitti, A. [INFN, Section of Rome La Sapienza, Rome, Italy and Department of Physics, University of Rome La Sapienza, Rome (Italy); Caracciolo, V. [INFN, Gran Sasso National Laboratories, Assergi (Aq), Italy and Department of Physics, University of L' Aquila, L' Aquila (Italy); and others

    2013-08-08

    Cadmium tungstate crystal scintillators enriched in {sup 106}Cd up to 66% ({sup 106}CdWO{sub 4}) and in {sup 116}Cd up to 82% ({sup 116}CdWO{sub 4}) have been developed. The low radioactive contamination of the crystals measured on the level of ≤ 1.5 mBq/kg ({sup 40}K), ≤ 0.005 - 0.012 mBq/kg ({sup 226}Ra), 0.04 - 0.07 mBq/kg ({sup 228}Th) allows to carry out high sensitivity experiments to search for double beta processes in {sup 106}Cd and {sup 116}Cd.

  1. Characterization of CdS/CdTe and CdS/CuInSe2 thin film solar cells

    Science.gov (United States)

    Cheng, L. J.; Nguyen, T. T.; Shyu, C. M.; Basol, B. M.; Yoo, H. I.

    1984-01-01

    A study on low cost polycrystalline thin film CdS/CdTe and CdS/CuInSe2 solar cells using measurements of spectral response and capacitance-voltage-frequency relationships was performed. Because of high concentrations of localized levels in the energy gap existing in materials and at interfaces, the redistribution of charge among the levels due to illumination plays an important role in the collection of light-generated current in these cells. The results illustrate some related phenomena observed in these cells.

  2. Polycrystalline CuInSe{sub 2} and CdTe solar cells. Annual subcontract report, April 15, 1992--April 14, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Dhere, N.G. [Florida Solar Energy Center, Cape Canaveral, FL (United States)

    1994-08-01

    The principal objective of the research project is to develop processes for the fabrication of cadmium-telluride, CdTe, and copper-indium-gallium-diselenide, Cu(In{sub 1{minus}x}Ga{sub x})Se{sub 2}, polycrystalline-thin-film solar cells using techniques that can be scaled-up for economic manufacture on a large scale. The aims are to fabricate CdTe solar cells using Cd and Te layers sputtered from elemental targets; to promote the interdiffusion between Cd/Te layers, CdTe phase formation, and grain growth; to utilize non-toxic selenization so as to avoid the use of extremely toxic H{sub 2}Se in the fabrication of Cu(In{sub l{minus}x}Ga{sub x})Se{sub 2} thin-film solar cells; to optimize selenization parameters; to improve adhesion; to minimize residual stresses; to improve the uniformity, stoichiometry, and morphology of CdTe and Cu(In{sub 1{minus}x}Ga{sub x})Se{sub 2} thin films, and the efficiency of CdTe and Cu(In{sub 1{minus}x}Ga{sub x})Se{sub 2} solar cells.

  3. Effect of plant growth-promoting rhizobacteria inoculation on cadmium (Cd) uptake by Eruca sativa.

    Science.gov (United States)

    Kamran, Muhammad Aqeel; Syed, Jabir Hussain; Eqani, Syed Ali Musstjab Akber Shah; Munis, Muhammad Farooq Hussain; Chaudhary, Hassan Javed

    2015-06-01

    Microbe-assisted phyto-remediation approach is widely applied and appropriate choice to reduce the environmental risk of heavy metals originated from contaminated soils. The present study was designed to screen out the nested belongings of Eruca sativa plants and Pseudomonas putida (ATCC 39213) at varying cadmium (Cd) levels and their potential to deal with Cd uptake from soils. We carried out pot trial experiment by examining the soil containing E. sativa seedlings either treated with P. putida and/or untreated plants subjected to three different levels (ppm) of Cd (i.e., 150, 250, and 500). In all studied cases, we observed an increase in Cd uptake for E. sativa plants inoculated with P. putida than those of un-inoculated plants. Cd toxicity was assessed by recording different parameters including stunted shoot growth, poor rooting, and Cd residual levels in the plants that were not inoculated with P. putida. Significant difference (p sativa exhibited increased values for different growth parameters (except proline contents) at lower Cd levels than those of their corresponding higher levels, shoot length (up to 27 %), root length (up to 32 %), whole fresh plant (up to 40 %), dry weight (up to 22 %), and chlorophyll contents (up to 26 %). Despite the hyperaccumulation of Cd in whole plant of E. sativa, P. putida improved the plant growth at varying levels of Cd supply than those of associated non-inoculated plants. Present results indicated that inoculation with P. putida enhanced the Cd uptake potential of E. sativa and favors the healthy growth under Cd stress.

  4. Immobilization of Cadmium in a Cd-Spiked Soil by Different Kinds of Amendments

    Directory of Open Access Journals (Sweden)

    Mahboub Saffari

    2015-07-01

    Full Text Available    Chemical stabilization of heavy metals is one of the soil remediation methods based on the application amendments to reduce mobility of heavy metals. A laboratory study was conducted to investigate the influence of different kinds of amendments on cadmium (Cd stabilization in a Cd-spiked soil. The amendments were municipal solid waste compost (MSWC, Coal fly ash (CFA, rice husk biochars prepared at 300°C (B300 and 600°C (B600, zero valent iron (Fe0 and zero valent manganese (Mn0. The Cd-spiked soils were separately incubated with selected amendments at the rates of 2 and 5% (W/W for 90 days at 25 °C. Soil samples were extracted by EDTA for periods of 5 to 975min. In addition, sequential extraction was used as a suitable method for identification of chemical forms of Cd and their plant availability. The addition of amendments to soil had significant effects on desorption and chemical forms of Cd. Changes in Cd fractions and their conversion into less soluble forms were clear in all treated soils. The addition of amendments resulted in a significant reduction in mobility factor of Cd compared to the control treatment. Among all amendments tested, Fe0 was the most effective treatment in decreasing dynamic of Cd. Biphasic pattern of Cd desorption kinetic was fitted well by the model of two first-order reactions. In general, from the practical point of view, Fe0, MSWC and Mn0 treatments are effective in Cd immobilization, while application of  Fe0 at 5% (W/W was the best treatment for stabilization of Cd

  5. Uptake of cadmium by cress, lettuce and tomato in Cd-contaminated soil

    Directory of Open Access Journals (Sweden)

    J. Abedi-Koupai

    2015-06-01

    Full Text Available Increasing of water consumption and demand for irrigation water in agriculture has led to an increase in reuse of treated, or even raw, municipal and industrial wastewater in many countries. Heavy metals (HMs in these unconventional waters are one of the sources of pollution of water, soil and plant. HM toxicity in plants may eventually cause disturbances in plant growth. Accumulation of HMs in plants has health problems for human beings and animals which consume these plants. In this research, uptake of cadmium (Cd by three vegetables (cress (Lepidium sativum L., lettuce (Lactuca sativa L. and tomato (Solanum lycopersicum L. from a contaminated soil was studied. The experimental design was completely randomized. For each plant, two soil treatments (control soil and contaminated soil by 100 mg/L Cd and five replications were considered. After planting, growing and harvesting, and preparation of the samples, Cd uptake in roots and shoots was measured. Results showed that mean Cd uptake by all three plants was significantly different from the control treatment. Maximum uptake of Cd belonged to tomato, whereas lettuce had the lowest uptake. Transfer coefficient of Cd from soil into cress, lettuce and tomato was 1.3, 0.33 and 0.65, respectively. Although transfer coefficient of Cd to lettuce is lower than the other two plants, but consumption of lettuce per person is much greater than cress. Hence, irrigation management of polluted wastewater is important.

  6. Solar-energy conversion by combined photovoltaic converters with CdTe and CuInSe{sub 2} base layers

    Energy Technology Data Exchange (ETDEWEB)

    Khrypunov, G. S., E-mail: khrip@ukr.net; Sokol, E. I. [National Technical University “Kharkiv Polytechnic Institute” (Ukraine); Yakimenko, Yu. I. [National Technical University “Kyiv Polytechnic Institute”, Research Institute of Applied Electronics (Ukraine); Meriuts, A. V. [National Technical University “Kharkiv Polytechnic Institute” (Ukraine); Ivashuk, A. V. [National Technical University “Kyiv Polytechnic Institute”, Research Institute of Applied Electronics (Ukraine); Shelest, T. N. [National Technical University “Kharkiv Polytechnic Institute” (Ukraine)

    2014-12-15

    The possibility of the combined use of bifacial thin-film solar cells based on CdTe and frontal solar cells with a CuInSe{sub 2} base layer in tandem structures is experimentally confirmed. It is found that, for the use of bifacial solar cells based on cadmium telluride in a tandem structure, the optimal thickness of their base layer should be 1 μm. The gain in the efficiency of the tandem structure, compared with an individual CuInSe{sub 2}-based solar cell, is 1.8% in the case of series-connected solar cells and 1.3%, for parallel-connected.

  7. Surface functionalized Cu2Zn1- x Cd x SnS4 quinternary alloyed nanostructure for DNA sensing

    Science.gov (United States)

    Ibraheam, A. S.; Al-Douri, Y.; Voon, C. H.; Foo, K. L.; Azizah, N.; Gopinath, S. C. B.; Ameri, M.; Ibrahim, Sattar S.

    2017-03-01

    A sensing plate of extended Cu2Zn1- x Cd x SnS4 quinternary alloy nanostructures, fabricated on an oxidized silicon substrate by the sol-gel method, is reported in this paper. The fabricated device was characterized and analyzed via field emission-scanning electron microscopy, X-ray diffraction (XRD), and photoluminescence (PL). The XRD peaks shifted towards the lower angle side alongside increasing concentration of cadmium. The average diameter of the Cu2Zn1- x Cd x SnS4 quinternary alloy nanostructures falls between 21.55 and 43.12 nm, while the shift of the PL bandgap was from 1.81 eV ( x = 0) to 1.72 eV ( x = 1). The resulting Cu2Zn1- x Cd x SnS4 quinternary alloy nanostructures components were functionalized with oligonucleotides probe DNA molecules and interacted with the target, exhibiting good sensing capabilities due to its large surface-to-volume ratio. The fabrication, immobilization, and hybridization processes were analyzed via representative current-voltage ( I- V) plots. Its electrical profile shows that the device is capable to distinguish biomolecules. Its high performance was evident from the linear relationship between the probe DNA from cervical cancer and the target DNA, showing its applicability for medical applications.

  8. Effect of biochars and microorganisms on cadmium accumulation in rice grains grown in Cd-contaminated soil.

    Science.gov (United States)

    Suksabye, Parinda; Pimthong, Apinya; Dhurakit, Prapai; Mekvichitsaeng, Phenjun; Thiravetyan, Paitip

    2016-01-01

    Cadmium (Cd) contaminated in rice grains is a serious problem because most Asians consume rice on a daily basis. Rice grown in Cd-contaminated soil normally did not have high concentration of Cd. However, soil samples used in this study had high concentrations of Cd. The purpose of this study was to clearly see the effects of biochar and microorganism addition in rice growing in Cd-contaminated soil. The initial Cd concentration in Cd-contaminated soil used in this study was about 650 mg kg(-1). Cadmium concentration in rice plants grown in Cd-contaminated soil with the addition of 1% (w/w) different biochars such as sawdust fly ash (SDFA), bagasse fly ash (BGFA), and rice husk ash (RHA) was investigated. The results showed that SDFA was the best biochar in terms of reducing cadmium accumulation in rice grains when compared to BGFA and RHA under the same conditions. In addition, rice plants grown in Cd-contaminated soil with the addition of various nonpathogenic microorganisms, such as Pseudomonas aeruginosa, Bacillus subtilis, and Beauveria bassiana were also studied. The results showed that the addition of 2% (v/v) microorganisms can reduce Cd accumulation in grains. It was found that grains obtained from Cd-contaminated soil with the addition of P. aeruginosa had the lowest cadmium concentration compared to the ones from soil amended with other strains. This was due to the fact that P. aeruginosa adsorbed more Cd itself into its cells than other strains. The rice plants grown in Cd-contaminated soil with the addition of biochars and microorganisms were also compared. The results showed that adding 2% (v/v) microorganisms seemed to reduce Cd accumulation in rice grains better than adding 1% (w/w) biochars. In addition, the amounts of calcium and magnesium in rice grains and the dry weight of plant in Cd-contaminated soil amended with P. aeruginosa were the highest in comparison to other microorganisms, biochars, and the soil without any amendments (Cd

  9. ANALISIS KONSENTRASI MERKURI (Hg) DAN CADMIUM (Cd) DI MUARA SUNGAI PORONG SEBAGAI AREA BUANGAN LIMBAH LUMPUR LAPINDO

    OpenAIRE

    R Rachmawatie; Zainul Hidayah; Indah Wahyuni Abida

    2009-01-01

    Tujuan riset ini adalah untuk meneliti konsentrasi Merkuri ( Hg) dan Cadmium ( Cd) di  muara Sungai Porong serta menentukan tingkat pencemaran logam berat di area tersebut. Analisa statistic yang digunakan adalah  ANOVA  dan analisis regresi yang digunakan untuk menguji hubungan logam berat yang terdeteksi dengan parameter penunjang. Hasil penelitian menunjukkan konsentrasi Cd telah melewati batasan normal di area muara. Disamping itu, Merkuri (Hg) tidak terdeteksi. Rata-Rata konsentrasi Cd d...

  10. UV-Induced Anisotropy In CdBr2-CdBr2: Cu Nanostructures

    Directory of Open Access Journals (Sweden)

    El-Naggar A. M.

    2015-09-01

    Full Text Available We have found an occurrence of anisotropy in the nanostructure CdBr2-CdBr2: Cu nanocrystalline films. The film thickness was varied from 4 nm up to 80 nm. The films were prepared by successive deposition of the novel layers onto the basic nanocrystals. The detection of anisotropy was performed by occurrence of anisotropy in the polarized light at 633 nm He-Ne laser wavelength. The occurrence of anisotropy was substantially dependent on the film thickness and the photoinduced power density. Possible mechanisms of the observed phenomena are discussed.

  11. Bile secretion of cadmium, silver, zinc and copper in the rat. Involvement of various transport systems.

    NARCIS (Netherlands)

    Havinga, R; Vonk, RJ; Kuipers, F

    1996-01-01

    In the present study we compared, in vivo in rats, the hepatobiliary transport of monovalent (silver:Ag) and divalent metals (zinc:Zn; cadmium:Cd) with that of copper (Cu). Cu can have two oxidation states in vivo, i.e. Cu(I) and Cu(II). Studies were performed in normal Wistar (NW) rats and mutant G

  12. CdS/Cu纳米光催化剂降解废水中的HMX和RDX试验研究%Photocatalytic Degradation of HMX and RDX Wastewater with CdS/Cu Nanophotocatalyst

    Institute of Scientific and Technical Information of China (English)

    Hamid Reza Pouretedal; Mohammad Hossien Keshavarz; Mohammad Hasan Yosefi; Arash Shokrollahi; Abbas Zali

    2008-01-01

    The wastewater with HMX and RDX was treated by photodegradation process in the presence of cadmium sulfide doped with copper as photocatalyst under UV and Vis irradiations. The influence on the degration of Cu% as dopant in CdS/Cu nanoparticles, pH of solution, dosage of photocatalyst and concentration of explosives were studied. The XRD patterns and UV-Vis spectra were used to characterize the nanoparticle. Results show that the degradation efficiency for HMX and RDX wastewater reaches 85%-88% in the presence of Cd0.95Cu0.05S under 180 min UV irradiation. The dosage of 160.0 mg·L-1 of photocatalyst and the pH of 7 are the optimum. A gradual decrease in degradation at the first two cycles is seen.

  13. Chemical bath deposition of CdS thin films doped with Zn and Cu

    Indian Academy of Sciences (India)

    A I Oliva; J E Corona; R Patiño; A I Oliva-Avilés

    2014-04-01

    Zn- and Cu-doped CdS thin films were deposited onto glass substrates by the chemical bath technique. ZnCl2 and CuCl2 were incorporated as dopant agents into the conventional CdS chemical bath in order to promote the CdS doping process. The effect of the deposition time and the doping concentration on the physical properties of CdS films were investigated. The morphology, thickness, bandgap energy, crystalline structure and elemental composition of Zn- and Cu-doped CdS films were investigated and compared to the undoped CdS films properties. Both Zn- and Cu-doped CdS films presented a cubic crystalline structure with (1 1 1) as the preferential orientation. Lower values of the bandgap energy were observed for the doped CdS films as compared to those of the undoped CdS films. Zn-doped CdS films presented higher thickness and roughness values than those of Cu-doped CdS films. From the photoluminescence results, it is suggested that the inclusion of Zn and Cu into CdS crystalline structure promotes the formation of acceptor levels above the CdS valence band, resulting in lower bandgap energy values for the doped CdS films.

  14. Detection of Ni, Cd, and Cu in green leafy vegetables collected from different cultivation areas in and around Colombo District, Sri Lanka.

    Science.gov (United States)

    Kananke, Thilini; Wansapala, Jagath; Gunaratne, Anil

    2016-03-01

    Five types of green leafy vegetables ["Kankun" (Ipomoea aquatica), "Mukunuwenna" (Alternanthera sessilis), "Thampala" (Amaranthus viridis), "Nivithi" (Basella alba), and "Kohila leaves" (Lasia spinosa)] were randomly collected from six different locations (Wellampitiya, Kolonnawa, Kottawa, Piliyandala, Bandaragama, and Kahathuduwa) in and around Colombo District, Sri Lanka, and subjected to analysis of three heavy metals [nickel (Ni), cadmium (Cd), and copper (Cu)] by atomic absorption spectrometry. Soils from green leafy vegetable cultivation lands and irrigated water were also tested. The average concentrations of heavy metals Ni, Cd, and Cu in soils were 51.5 ± 45.5, 1.4 ± 1.1, and 66.5 ± 59.5 mg kg(-1), respectively. The highest Ni contamination was detected in the irrigated water samples from Wellampitiya (2.02 mg L(-1)) followed by Kolonnawa (1.02 mg L(-1)) and Kahathuduwa (0.25 mg L(-1)) areas. This has exceeded the WHO/FAO guideline (0.2 mg L(-1)). However, Cd and Cu contents in all tested irrigated water samples were well below the detection limits. Significant differences were observed in Ni, Cd, and Cu levels, between both production sites and green leafy vegetables analyzed (P vegetable samples collected from six areas varied as 0.23 ± 0.15 for Cd, 12.60 ± 9.01 for Cu, and 7.62 ± 8.41 for Ni. Maximum Ni, Cd, and Cu contaminations were found in the green leafy vegetables collected from Kolonnawa area. Among the green leafy vegetables analyzed, "Kohila leaves" have the highest tendency to accumulate Ni, Cd, and Cu from the environment.

  15. Tris(2-mercaptoimidazolyl)hydroborato Cadmium Thiolate Complexes, [Tm(Bu(t))]CdSAr: Thiolate Exchange at Cadmium in a Sulfur-Rich Coordination Environment.

    Science.gov (United States)

    Kreider-Mueller, Ava; Quinlivan, Patrick J; Owen, Jonathan S; Parkin, Gerard

    2017-04-17

    A series of cadmium thiolate compounds that feature a sulfur-rich coordination environment, namely [Tm(Bu(t))]CdSAr, have been synthesized by the reactions of [Tm(Bu(t))]CdMe with ArSH (Ar = C6H4-4-F, C6H4-4-Bu(t), C6H4-4-OMe, and C6H4-3-OMe). In addition, the pyridine-2-thiolate and pyridine-2-selenolate derivatives, [Tm(Bu(t))]CdSPy and [Tm(Bu(t))]CdSePy have been obtained via the respective reactions of [Tm(Bu(t))]CdMe with pyridine-2-thione and pyridine-2-selone. The molecular structures of [Tm(Bu(t))]CdSAr and [Tm(Bu(t))]CdEPy (E = S or Se) have been determined by X-ray diffraction and demonstrate that, in each case, the [CdS4] motif is distorted tetrahedral and approaches a trigonal monopyramidal geometry in which the thiolate ligand adopts an equatorial position; [Tm(Bu(t))]CdSPy and [Tm(Bu(t))]CdSePy, however, exhibit an additional long-range interaction with the pyridyl nitrogen atoms. The ability of the thiolate ligands to participate in exchange was probed by (1)H and (19)F nuclear magnetic resonance (NMR) spectroscopic studies of the reactions of [Tm(Bu(t))]CdSC6H4-4-F with ArSH (Ar = C6H4-4-Bu(t) or C6H4-4-OMe), which demonstrate that (i) exchange is facile and (ii) coordination of thiolate to cadmium is most favored for the p-fluorophenyl derivative. Furthermore, a two-dimensional EXSY experiment involving [Tm(Bu(t))]CdSC6H4-4-F and 4-fluorothiophenol demonstrates that degenerate thiolate ligand exchange is also facile on the NMR time scale.

  16. Micronucleus Test, Nuclear Abnormalities and Accumulation of Cu and Cd on Gambusia affinis (Baird & Girard, 1853)

    OpenAIRE

    Güner, Utku; Dilek, Fulya; Muranlı, Gökalp

    2011-01-01

    In the present work the induction of micronuclei (MNi) and nuclear abnormalities (NAs) in erythrocytes and Cu and Cd accumulation in whole body of Gambusia affinis were studied. Fish were exposed to two different Cu and Cd concentrations, 0.1 ppm and 1 ppm, for 1 and 2 weeks periods and to Cu-Cd combination (0.1 ppm Cu + 0.1 ppm Cd) for 2 weeks period using a semi-static renewal system. Micronucleus and nuclear abnormality analysis were carried out on peripheral blood erythrocytes. When fish...

  17. Modelling the concentrations of dissolved contaminants (Cd, Cu, Ni, Pb, Zn) in floodplain soils.

    Science.gov (United States)

    Rennert, Thilo; Rabus, Widar; Rinklebe, Jörg

    2017-04-01

    Central European floodplain soils are often contaminated with potentially toxic metals. The prediction of their aqueous concentrations is a prerequisite for an assessment of environmental concerns. We tested the aqueous concentrations of cadmium (Cd), copper (Cu), nickel (Ni), lead (Pb) and zinc (Zn) derived from multi-surface adsorption modelling (on hydrous iron, aluminum and manganese oxides, clay and soil organic matter) against those analyzed in situ in the soil solution of four horizons of floodplain soils at the Elbe River, Germany. The input data for the reactive metals were derived from a seven-step sequential extraction scheme or from extraction with 0.43 M nitric acid (HNO3) and evaluated in four modelling scenarios. In all scenarios, measured and modelled concentrations were positively related, except partially for Pb. Close reproduction of the measured data was obtained using measured data of accompanying cations and anions together with amounts of reactive metals from both the sequential extraction or from 0.43 M HNO3 extraction, except for Cu, which was often strongly overestimated, and partially Cd. We recommend extraction with 0.43 M HNO3 to quantify reactive metals in soil because the modelling results were metal-specific with better or equal results using the single extractant, the application of which is also less laborious. Approximations of ion concentrations and water contents yielded similar results. Modelled solid-phase speciation of metals varied with pH and differed from that from sequential extraction. Multi-surface modelling may be an effective tool to predict both aqueous concentrations and solid-phase speciation of metals in soil.

  18. AKUMULASI CADMIUM (CD PADA IKAN WADER MERAH (PUNTIUS BRAMOIDES C.V, DI SUNGAI KALIGARANG

    Directory of Open Access Journals (Sweden)

    R. Prabowo

    2016-11-01

    Full Text Available Kadmium merupakan bahan beracun yang menyebabkan keracunan kronik pada manusia, maka tingkat maksimun yang diperbolehkan di perairan adalah 0,01 mg/L (PP No 82 Th 2001 Tentang Kualitas Air. Penelitian ini bertujuan (1 mengidentifikasi gambaran umum kualitas air Sungai Kaligarang, (2 Mengidentifikasi konsentrasi logam berat Kadmium (Cd di Sungai Kaligarang, serta (3 mengidentifikasi akumulasi logam berat Cd pada ikan wader merah (Puntius bramoides C.V yang hidup di Sungai Kaligarang. Penelitian ini merupakan penelitian observasi eksploratif dengan pendekatan kuantitatif yang bertujuan untuk menggambarkan kandungan logam berat Cd pada air dan ikan wader merah di Sungai Kaligarang. Penentuan lokasi pengambilan sampel secara purposif sampling. Hasil penelitian menunjukkan bahwa parameter lingkungan berupa Suhu, pH, BOD, DO di Sungai Kaligarang tidak melebihi baku mutu berdasarkan mutu air penggolongan kelas I. Parameter logam berat Cd dalam air tidak melebihi aturan yang ditetapkan PP Nomor 82 Th 2001 tentang Pengelolaan Kualitas Air dan Pengendalian Pencemaran Air. Kadar logam berat yang terkandung pada ikan wader merah masih berada di bawah baku mutu yang ditetapkan baik dari FDR New Zealand, FAO, Serta SNI. 7387.2009, Tentang Batas Maksimum Cemaran logam Berat Dalam Pangan.Cadmium is a toxic substance that causes chronic poisoning in humans and the maximum permissible level in the water is 0.01 mg / L. (Th Government Regulation No. 82 of 2001 on water quality. This study aimes to (1 identify general description of Kaligarang water quality, (2 heavy metalconcentrations of Cadmium (Cd in Kaligarang river and (3 identifying Cd accumulation of heavy metal in red Wader fish. This research is an observational exploration with a quantitative approach that aims to describe the level of heavy metal Cd in water and wader in Kaligarang. The location is determined by sampling study with purposive sampling. The result shows that the environmental parameters

  19. Cd4Cu7As, the first representative of a fully ordered, orthorhombically distorted MgCu2 Laves phase.

    Science.gov (United States)

    Osters, Oliver; Nilges, Tom; Schöneich, Michael; Schmidt, Peer; Rothballer, Jan; Pielnhofer, Florian; Weihrich, Richard

    2012-08-06

    The ternary Laves phase Cd(4)Cu(7)As is the first intermetallic compound in the system Cu-Cd-As and a representative of a new substitution variant for Laves phases. It crystallizes orthorhombically in the space group Pnnm (No. 58) with lattice parameters a = 9.8833(7) Å; b = 7.1251(3) Å; c = 5.0895(4) Å. All sites are fully occupied within the standard deviations. The structure can be described as typical Laves phase, where Cu and As are forming vertex-linked tetrahedra and Cd adopts the structure motive of a distorted diamond network. Cd(4)Cu(7)As was prepared from stoichiometric mixtures of the elements in a solid state reaction at 1000 °C. Magnetic measurements are showing a Pauli paramagnetic behavior. During our systematical investigations within the ternary phase triangle Cd-Cu-As the cubic C15-type Laves phase Cd(4)Cu(6.9(1))As(1.1(1)) was structurally characterized. It crystallizes cubic in the space group Fd3m with lattice parameter a = 7.0779(8) Å. Typically for quasi-binary Laves phases Cu and As are both occupying the 16c site. Chemical bonding, charge transfer and atomic properties of Cd(4)Cu(7)As were analyzed by band structure, ELF, and AIM calculations. On the basis of the general formula for Laves phases AB(2), Cd is slightly positively charged forming the A substructure, whereas Cu and As represent the negatively charged B substructure in both cases. The crystal structure distortion is thus related to local effects caused by Arsenic that exhibits a larger atomic volume (18 Å(3) compared to 13 Å(3) for Cu) and higher ionicity in bonding.

  20. A quantitative approach for Cd, Cu, Fe and Mn through laser ablation imaging for evaluating the translocation and accumulation of metals in sunflower seeds.

    Science.gov (United States)

    Pessôa, Gustavo de S; Lopes Júnior, Cícero A; Madrid, Katherine C; Arruda, Marco A Z

    2017-05-15

    The uptake and accumulation of Cd in sunflower seeds represents an important pathway for imputing potentially toxic metals into human and animal food. In this way, bioimaging of Cd and micronutrients (Cu, Fe and Mn) in the seeds of sunflower grown in soil contaminated with Cd are performed. For this task, laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is used in quantitative approach, considering four groups: precursor, control, Cd-low (50mg) and Cd-high (700mg). For attaining our proposals, ICP-MS (nebulizer and auxiliary flow rates and radiofrequency power) and LA (laser intensity, frequency and spot size) parameters were optimized, and the analytical signal improved to 197%, 217%, 232%, and 283%, for (57)Fe, (112)Cd, (55)Mn and (63)Cu, respectively. The accuracy of proposed method using LA-ICP-MS is evaluated comparing the CRM results (Tomato leaves, NIST SRM 1573a). No difference is found at 95% confidence level. Regarding Cd accumulation in sunflower seeds, the results indicated that cadmium is translocated to seeds, and the cotyledons showed the highest concentration (Cd-high group), ranging from 10 to 20µgg(-1). Considering both total concentration and the distribution in the seeds, Cd uptake is responsible to the homeostasis misbalance of micronutrients, which play an essential role in the sunflower metabolism. Such results highlight the importance of bioimaging evaluation, in the translocation and accumulation of metals, contributing to expand the information available of this culture.

  1. Cadmium sulfate and CdTe-quantum dots alter DNA repair in zebrafish (Danio rerio) liver cells

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Song; Cai, Qingsong [The Institute of Environmental and Human Health, Texas Tech University, Lubbock, TX 79416 (United States); Chibli, Hicham [Department of Biomedical Engineering, McGill University, Montréal, QC H3A 2B4 (Canada); Allagadda, Vinay [The Institute of Environmental and Human Health, Texas Tech University, Lubbock, TX 79416 (United States); Nadeau, Jay L. [Department of Biomedical Engineering, McGill University, Montréal, QC H3A 2B4 (Canada); Mayer, Gregory D., E-mail: greg.mayer@ttu.edu [The Institute of Environmental and Human Health, Texas Tech University, Lubbock, TX 79416 (United States)

    2013-10-15

    Increasing use of quantum dots (QDs) makes it necessary to evaluate their toxicological impacts on aquatic organisms, since their contamination of surface water is inevitable. This study compares the genotoxic effects of ionic Cd versus CdTe nanocrystals in zebrafish hepatocytes. After 24 h of CdSO{sub 4} or CdTe QD exposure, zebrafish liver (ZFL) cells showed a decreased number of viable cells, an accumulation of Cd, an increased formation of reactive oxygen species (ROS), and an induction of DNA strand breaks. Measured levels of stress defense and DNA repair genes were elevated in both cases. However, removal of bulky DNA adducts by nucleotide excision repair (NER) was inhibited with CdSO{sub 4} but not with CdTe QDs. The adverse effects caused by acute exposure of CdTe QDs might be mediated through differing mechanisms than those resulting from ionic cadmium toxicity, and studying the effects of metallic components may be not enough to explain QD toxicities in aquatic organisms. - Highlights: • Both CdSO{sub 4} and CdTe QDs lead to cell death and Cd accumulation. • Both CdSO{sub 4} and CdTe QDs induce cellular ROS generation and DNA strand breaks. • Both CdSO{sub 4} and CdTe QDs induce the expressions of stress defense and DNA repair genes. • NER repair capacity was inhibited with CdSO{sub 4} but not with CdTe QDs.

  2. Absorption Reduction Capacity with Chromium (Cr and Cadmium (Cd Contaminants of Vetiver Phytoremediation Process on Compost Soil

    Directory of Open Access Journals (Sweden)

    Ahamad Zubair

    2016-01-01

    Full Text Available This study aims to analyze the large of reduction capacity of chromium metals and cadmium in the soil compost media and absorption capacity of chrome and cadmium in phytoremediation process of vetiver; to compare the reduction-absorption capacities of chromium and cadmium metals in phytoremediation process of vetiver (Vetivera zizanioides. The study was carried out for 2 months with a range of sampling every 7 days, and then analyzed by using Atomic Absorption Spectrophotometer (AAS. Contaminants used as artificial contaminants containing heavy metals chromium (Cr and cadmium (Cd. This study is an experimental research includes two variables. First, the variations of Cr concentrations used were 400 ppm, 600 ppm and 800 ppm and Cd concentrations used were 40 ppm, 60 ppm, 800 ppm. Secondly, the variations of total plant are 3, 6, and 9 plant. The period of observation is made every week. Planting media used is compost soil with compost and clay composition of 20%, 30% and 40%. The results of study showed that there are a significant relationship between the reduction capacity of Cr and Cd of compost soil and the absorption capacity of Cr and Cd for vetiver (Vetiveria zizanioides. The higher of Cr and Cd decreases in soil followed by increased levels of Cr and Cd in vetiver (Vetiveria zizanioides. The capacity of Cr reduction varies between 57% - 86% and Cd 36% - 64% where as the absorption capacity of vetiver on Cr between 38% - 75% and Cd between 34%-74%. The capacity of reduction-absorption of Cr is relatively higher than Cd in phytoremediation process of vetiver.

  3. Investigation of Cu-poor and Cu-rich Cu(In,Ga)Se{sub 2}/CdS interfaces using hard X-ray photoelectron spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ümsür, B., E-mail: buenyamin.uemsuer@helmholtz-berlin.de [Helmholtz-Zentrum-Berlin, Hahn-Meitner-Platz 1, D-14109 Berlin (Germany); Calvet, W.; Höpfner, B.; Steigert, A.; Lauermann, I.; Gorgoi, M.; Prietzel, K.; Navirian, H.A.; Kaufmann, C.A.; Unold, T. [Helmholtz-Zentrum-Berlin, Hahn-Meitner-Platz 1, D-14109 Berlin (Germany); Lux-Steiner, M. Ch. [Helmholtz-Zentrum-Berlin, Hahn-Meitner-Platz 1, D-14109 Berlin (Germany); Freie Universität Berlin, Department of Physics, Arnimallee 14, D-14195 Berlin (Germany)

    2015-05-01

    Cu-poor and Cu-rich Cu(In,Ga)Se{sub 2} (CIGSe) absorbers were used as substrates for the chemical bath deposition of ultrathin CdS buffer layers in the thickness range of a few nanometers in order to make the CIGSe/CdS interface accessible by hard X-ray photo-emission spectroscopy. The composition of both, the absorber and the buffer layer as well as the energetics of the interface was investigated at room temperature and after heating the samples to elevated temperatures (200 °C, 300 °C and 400 °C). It was found that the amount of Cd after the heating treatment depends on the near surface composition of the CIGSe absorber. No Cd was detected on the Cu-poor surface after the 400 °C treatment due to its diffusion into the CIGSe layer. In contrast, Cd was still present on the Cu-rich surface after the same treatment at 400 °C. - Highlights: • Cd diffusion into Cu(In,Ga)Se{sub 2} (CIGSe) absorber is investigated. • Cu-poor and Cu-rich CIGSe samples are compared. • Cd diffusion into CIGSe is found to be dependent on the surface composition of CIGSe.

  4. Cadmium(II) complex formation with selenourea and thiourea in solution: an XAS and 113Cd NMR study.

    Science.gov (United States)

    Jalilehvand, Farideh; Amini, Zahra; Parmar, Karnjit

    2012-10-15

    The complexes formed in methanol solutions of Cd(CF(3)SO(3))(2) with selenourea (SeU) or thiourea (TU), for thiourea also in aqueous solution, were studied by combining (113)Cd NMR and X-ray absorption spectroscopy. At low temperature (~200 K), distinct (113)Cd NMR signals were observed, corresponding to CdL(n)(2+) species (n = 0-4, L = TU or SeU) in slow ligand exchange. Peak integrals were used to obtain the speciation in the methanol solutions, allowing stability constants to be estimated. For cadmium(II) complexes with thione (C═S) or selone (C═Se) groups coordinated in Cd(S/Se)O(5) or Cd(S/Se)(2)O(4) (O from MeOH or CF(3)SO(3)(-)) environments, the (113)Cd chemical shifts were quite similar, within 93-97 ppm and 189-193 ppm, respectively. However, the difference in the chemical shift for the Cd(SeU)(4)(2+) (578 pm) and Cd(TU)(4)(2+) (526 ppm) species, with CdSe(4) and CdS(4) coordination, respectively, shows less chemical shielding for the coordinated Se atoms than for S, in contrast to the common trend with increasing shielding in the following order: O > N > Se > S. In solutions dominated by mono- and tetra-thiourea/selenourea complexes, their coordination and bond distances could be evaluated by Cd K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. At ~200 K and high excess of thiourea, a minor amount (up to ~30%) of [Cd(TU)(5-6)](2+) species was detected by an upfield shift of the (113)Cd NMR signal (up to 423 ppm) and an amplitude reduction of the EXAFS oscillation. The amount was estimated by fitting linear combinations of simulated EXAFS spectra for [Cd(TU)(4)](2+) and [Cd(TU)(6)](2+) complexes. At room temperature, [Cd(TU)(4)](2+) was the highest complex formed, also in aqueous solution. Cd L(3)-edge X-ray absorption near edge structure (XANES) spectra of cadmium(II) thiourea solutions in methanol were used to follow changes in the CdS(x)O(y) coordination. The correlations found from the current and previous studies between (113

  5. Cadmium in the waters off South Morocco: Nature of particles hosting Cd and insights into the mechanisms fractionating Cd from phosphate

    Science.gov (United States)

    Waeles, Matthieu; Planquette, Hélène; Afandi, Imane; Delebecque, Nina; Bouthir, Fatimazohra; Donval, Anne; Shelley, Rachel U.; Auger, Pierre-Amaël.; Riso, Ricardo D.; Tito de Morais, Luis

    2016-05-01

    In this study, we report the distributions of total dissolvable cadmium and particulate cadmium from 27 stations in southern Moroccan coastal waters (22°N-30°N), which is part of the North-West African upwelling system. These distributions were predominantly controlled by upwelling of the North Atlantic Central Waters (NACWs) and uptake by primary production. Atmospheric inputs and phosphogypsum slurry inputs from the phosphate industry at Jorf Lasfar (33°N), recently estimated as an important source of dissolved cadmium (240 t Cd yr-1), are at best of minor importance for the studied waters. Our study provides new insights into the mechanisms fractionating cadmium from phosphate. In the upper 30 m, the anomalies observed in terms of Cd:P ratios in both the particulate and total dissolvable fractions were related to an overall preferential uptake of phosphate. We show that the type of phytoplanktonic assemblage (diatoms versus dinoflagellates) is also a determinant of the fractionation intensity. In subsurface waters (30-60 m), a clear preferential release of P (versus Cd) was observed indicating that remineralization in Oxygen Minimum Zones is a key process in sequestering Cd.

  6. Pine bark as bio-adsorbent for Cd, Cu, Ni, Pb and Zn

    DEFF Research Database (Denmark)

    Cutillas-Barreiro, L.; Ansias-Manso, L.; Fernandez Calviño, David;

    2014-01-01

    % for Pb2+, 83-84% for Cu2+, 78-84% for Cd2+, 77-83% for Zn2+, and 70-75% for Ni2+, and it was faster for low concentrations, with Pb suffering the highest retention, followed by Cu, Cd, Ni and Zn. The fitting to the Freundlich and Langmuir models was satisfactory. Desorption increased in parallel...

  7. First principles calculations of point defect diffusion in CdS buffer layers: Implications for Cu(In,Ga)(Se,S)2 and Cu2ZnSn(Se,S)4-based thin-film photovoltaics

    Science.gov (United States)

    Varley, J. B.; Lordi, V.; He, X.; Rockett, A.

    2016-01-01

    We investigate point defects in CdS buffer layers that may arise from intermixing with Cu(In,Ga)Se2 (CIGSe) or Cu2ZnSn(S,Se)4 (CZTSSe) absorber layers in thin-film photovoltaics (PV). Using hybrid functional calculations, we characterize the migration barriers of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities and assess the activation energies necessary for their diffusion into the bulk of the buffer. We find that Cu, In, and Ga are the most mobile defects in CIGS-derived impurities, with diffusion expected to proceed into the buffer via interstitial-hopping and cadmium vacancy-assisted mechanisms at temperatures ˜400 °C. Cu is predicted to strongly favor migration paths within the basal plane of the wurtzite CdS lattice, which may facilitate defect clustering and ultimately the formation of Cu-rich interfacial phases as observed by energy dispersive x-ray spectroscopic elemental maps in real PV devices. Se, Zn, and Sn defects are found to exhibit much larger activation energies and are not expected to diffuse within the CdS bulk at temperatures compatible with typical PV processing temperatures. Lastly, we find that Na interstitials are expected to exhibit slightly lower activation energies than K interstitials despite having a larger migration barrier. Still, we find both alkali species are expected to diffuse via an interstitially mediated mechanism at slightly higher temperatures than enable In, Ga, and Cu diffusion in the bulk. Our results indicate that processing temperatures in excess of ˜400 °C will lead to more interfacial intermixing with CdS buffer layers in CIGSe devices, and less so for CZTSSe absorbers where only Cu is expected to significantly diffuse into the buffer.

  8. First principles calculations of point defect diffusion in CdS buffer layers: Implications for Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4}-based thin-film photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Varley, J. B.; Lordi, V. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); He, X.; Rockett, A. [Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States)

    2016-01-14

    We investigate point defects in CdS buffer layers that may arise from intermixing with Cu(In,Ga)Se{sub 2} (CIGSe) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTSSe) absorber layers in thin-film photovoltaics (PV). Using hybrid functional calculations, we characterize the migration barriers of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities and assess the activation energies necessary for their diffusion into the bulk of the buffer. We find that Cu, In, and Ga are the most mobile defects in CIGS-derived impurities, with diffusion expected to proceed into the buffer via interstitial-hopping and cadmium vacancy-assisted mechanisms at temperatures ∼400 °C. Cu is predicted to strongly favor migration paths within the basal plane of the wurtzite CdS lattice, which may facilitate defect clustering and ultimately the formation of Cu-rich interfacial phases as observed by energy dispersive x-ray spectroscopic elemental maps in real PV devices. Se, Zn, and Sn defects are found to exhibit much larger activation energies and are not expected to diffuse within the CdS bulk at temperatures compatible with typical PV processing temperatures. Lastly, we find that Na interstitials are expected to exhibit slightly lower activation energies than K interstitials despite having a larger migration barrier. Still, we find both alkali species are expected to diffuse via an interstitially mediated mechanism at slightly higher temperatures than enable In, Ga, and Cu diffusion in the bulk. Our results indicate that processing temperatures in excess of ∼400 °C will lead to more interfacial intermixing with CdS buffer layers in CIGSe devices, and less so for CZTSSe absorbers where only Cu is expected to significantly diffuse into the buffer.

  9. Cu{sub 2}S as ohmic back contact for CdTe solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Türck, Johannes; Siol, Sebastian; Mayer, Thomas; Klein, Andreas; Jaegermann, Wolfram, E-mail: jaegermann@surface.tu-darmstadt.de

    2015-05-01

    We prepared a back contact for CdTe solar cells with Cu{sub 2}S as primary contact. Cu{sub 2}S was evaporated on CdCl{sub 2} treated CdTe solar cells in superstrate configuration. The CdTe and CdS layers were deposited by Closed Space Sublimation. Direct interface studies with X-ray photoelectron spectroscopy have revealed a strongly reactive interface between CdTe and Cu{sub 2}S. A valence band offset of 0.4-0.6 eV has been determined. The performance of solar cells with Cu{sub 2}S back contacts was studied in comparison to cells with an Au contact that deposited onto a CdCl{sub 2}-treated CdTe surface that was chemically etched using a nitric-phosphoric etch. The solar cells were analyzed by current-voltage curves and external quantum efficiency measurements. After several post deposition annealing steps, 13% efficiency was reached with the Cu{sub 2}S back contact, which was significantly higher than the ones obtained for the NP-etched back contacts. - Highlights: • A new back contact for CdTe solar out of Cu{sub 2}S has been tested. • With a direct interface experiment the valence band offset was determined. • Post deposition heat treatment has been carried out for the solar cells. • 13% efficiency has been reached with the Cu{sub 2}S back contact.

  10. Heat treatment effects in Cu2S-CdS heterojunction photovoltaic cells

    Science.gov (United States)

    Fahrenbruch, A. L.; Bube, R. H.

    1974-01-01

    The dependence of the short-circuit current on photon energy, temperature, and the state of optical degradation (or enhancement) is determined in a study of the photovoltaic properties of Cu2S-CdS single-crystal heterojunctions. A coherent formulation is proposed for the relationship between enhancement and optical degradation and for their effects on the transport of a short-circuit photoexcited current and dark forward-bias current in a photovoltaic cell. Optical degradation in a Cu2S-CdS cell is shown to be identical to the optical degradation of lifetime in a homogeneous CdS:Cd:Cu crystal.

  11. Effect of Cu doping on the properties of ZnTe:Cu thin films and CdS/CdTe/ZnTe solar cells

    Science.gov (United States)

    Tang, J.; Mao, D.; Trefny, J. U.

    1997-02-01

    The effects of Cu doping concentration and post-deposition annealing treatment on the properties of ZnTe thin films were investigated in an effort to decrease the Cu doping concentration and improve the long-term stability of CdS/CdTe/ZnTe solar cells. The structural, compositional, and electrical properties were studied systematically using x-ray diffraction (XRD), electron microprobe, Hall effect and conductivity measurements. XRD measurements indicated that the crystalline phase of as-deposited and low-temperature annealed ZnTe films is dependent on Cu doping concentration. Low-Cu-doped films exhibited zincblende phase, whereas high-Cu-doped films showed wurtzite phase. After annealing at high temperature (⩾350 °C), all films exhibited zincblende structure. Electron probe microanalysis revealed a deficiency of cations in low-Cu-doped films and an excess of cations in high-Cu-doped films. Hall effect measurements revealed a dependence of hole mobility on Cu doping concentration with the highest mobility (20 cm2/Vṡs) obtained at a low Cu concentration. Carrier concentrations higher than mid-1016cm-3 were obtained at a Cu concentration of 2 at. % and relatively low annealing temperatures. Studies of the activation energy of dark conductivity suggested that intrinsic defects (e.g., Zn vacancies) are the dominant acceptors for Cu concentrations lower than 4.5 at. %. Finally, ZnTe films with Cu concentrations as low as 1 at. % were used successfully as a back contact layer in CdTe based solar cells. Fill factors over 0.70 were obtained using ZnTe films of low Cu concentrations.

  12. Interaction of salinity and cadmium stresses on mineral nutrients, sodium, and cadmium accumulation in four barley genotypes*

    OpenAIRE

    Huang, You-zong; Wei, Kang; Yang, Juan; Dai, Fei; Zhang, Guo-ping

    2007-01-01

    Interaction of salinity (NaCl) and cadmium (Cd) on growth, mineral nutrients, Na and Cd accumulation in four barley genotypes differing in salt tolerance was studied in a hydroponic experiment. Cd, NaCl and their combined stresses reduced Ca and Mg concentrations in roots and shoots, K concentration in shoots, increased K and Cu concentrations in roots relative to control, but had non-significant effect on micronutrients Cu, Fe and Mn concentrations in shoot. The three stresses reduced accumu...

  13. Electroplating of CdTe Thin Films from Cadmium Sulphate Precursor and Comparison of Layers Grown by 3-Electrode and 2-Electrode Systems

    Directory of Open Access Journals (Sweden)

    Imyhamy M. Dharmadasa

    2017-01-01

    Full Text Available Electrodeposition of CdTe thin films was carried out from the late 1970s using the cadmium sulphate precursor. The solar energy group at Sheffield Hallam University has carried out a comprehensive study of CdTe thin films electroplated using cadmium sulfate, cadmium nitrate and cadmium chloride precursors, in order to select the best electrolyte. Some of these results have been published elsewhere, and this manuscript presents the summary of the results obtained on CdTe layers grown from cadmium sulphate precursor. In addition, this research program has been exploring the ways of eliminating the reference electrode, since this is a possible source of detrimental impurities, such as K+ and Ag+ for CdS/CdTe solar cells. This paper compares the results obtained from CdTe layers grown by three-electrode (3E and two-electrode (2E systems for their material properties and performance in CdS/CdTe devices. Thin films were characterized using a wide range of analytical techniques for their structural, morphological, optical and electrical properties. These layers have also been used in device structures; glass/FTO/CdS/CdTe/Au and CdTe from both methods have produced solar cells to date with efficiencies in the region of 5%–13%. Comprehensive work carried out to date produced comparable and superior devices fabricated from materials grown using 2E system.

  14. Electrical and optical characterization of the influence of chemical bath deposition time and temperature on CdS/Cu(In,Ga)Se{sub 2} junction properties in Cu(In,Ga)Se{sub 2} solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Han-Kyu; Ok, Eun-A [Korea Institute of Science and Technology (KIST), Seoul 136-791 (Korea, Republic of); Department of Materials Science and Engineering, Korea University, Seoul 136-701 (Korea, Republic of); Kim, Won-Mok; Park, Jong-Keuk [Korea Institute of Science and Technology (KIST), Seoul 136-791 (Korea, Republic of); Seong, Tae-Yeon [Department of Materials Science and Engineering, Korea University, Seoul 136-701 (Korea, Republic of); Lee, Dong Wha; Cho, Hoon Young [Department of Physics, College of Engineering, Dongguk University, Seoul 100-715 (Korea, Republic of); Jeong, Jeung-hyun, E-mail: jhjeong@kist.re.kr [Korea Institute of Science and Technology (KIST), Seoul 136-791 (Korea, Republic of)

    2013-11-01

    The effects of varying the conditions for the chemical bath deposition (CBD) of cadmium sulfide (CdS) layers on CdS/Cu(In,Ga)Se{sub 2} (CIGS) hetero-junctions were investigated using photoluminescence (PL), electroluminescence (EL), deep level transient spectroscopy (DLTS), and red-light-illuminated current-voltage (I–V) measurements. We demonstrated that varying CBD-CdS conditions such as the temperature and time influenced the recombination pathways around the CdS/CIGS junction via the formation of different electronic defects, which eventually changed the photovoltaic conversion efficiency. As the CBD-CdS time and temperature were increased, the cell efficiency decreased. PL measurements revealed that this degradation of the cell efficiency was accompanied by increases in the defect-related recombination, which were attributed to the existence of donor defects around CdS/CIGS having an energy level of 0.65 eV below conduction band, as revealed by DLTS. Increasing distortions in the red-light-illuminated I–V characteristics suggested that the related defects might also have played a critical role in metastable changes around the CdS/CIGS junction. Because the CBD-CdS time and temperature were considered to influence the diffusion of impurities into the CIGS surface, the evolution of the efficiency, PL spectra, defect populations, and red-light-illuminated I–V characteristics observed in this work could be attributed to the diffusion of impurities during the CBD-CdS process. - Highlights: • CdS layers were grown by chemical bath deposition (CBD). • The CBD-CdS influenced the efficiency of Cu(In,Ga)Se{sub 2} (CIGS) solar cell. • It could be related to slight alteration in carrier recombination around CdS/CIGS. • Photo- and electroluminescence spectra detected those alterations in recombination. • The variation of results could be related to the changes in deep-level defects.

  15. Extraction and isolation of the salidroside-type metabolite from zinc (Zn) and cadmium (Cd) hyperaccumulator Sedum alfredii Hance

    Institute of Scientific and Technical Information of China (English)

    Yan XING; Hong-yun PENG; Xia LI; Meng-xi ZHANG; Ling-ling GAO; Xiao-e YANG

    2012-01-01

    The active metabolite in the post-harvested biomass of zinc (Zn) and cadmium (Cd) hyperaccumulator Sedum alfredii Hance from phytoextraction is of great interest in China.The current study demonstrates that a salidroside-type metabolite can be yielded from the ZniCd hyperaccumulator S.alfredii biomass by means of sonication/ethanol extraction and macroporous resin column (AB-8 type) isolation.The concentrations of Zn and Cd in the salidroside-type metabolite were below the limitation of the national standards.

  16. Extraction and isolation of the salidroside-type metabolite from zinc (Zn) and cadmium (Cd) hyperaccumulator Sedum alfredii Hance*

    Science.gov (United States)

    Xing, Yan; Peng, Hong-yun; Li, Xia; Zhang, Meng-xi; Gao, Ling-ling; Yang, Xiao-e

    2012-01-01

    The active metabolite in the post-harvested biomass of zinc (Zn) and cadmium (Cd) hyperaccumulator Sedum alfredii Hance from phytoextraction is of great interest in China. The current study demonstrates that a salidroside-type metabolite can be yielded from the Zn/Cd hyperaccumulator S. alfredii biomass by means of sonication/ethanol extraction and macroporous resin column (AB-8 type) isolation. The concentrations of Zn and Cd in the salidroside-type metabolite were below the limitation of the national standards. PMID:23024051

  17. Analysis of Cu Diffusion in ZnTe-Based Contacts for Thin-Film CdS/CdTe Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Narayanswamy, C. (Department of Physics & Astronomy, University of Toledo); Gessert, T. A. and Asher, S. E. (National Renewable Energy Laboratory)

    1998-10-27

    Ohmic contacts to thin-film CdS/CdTe photovoltaic devices have been formed using a two-layer contact interface of undoped ZnTe (ZnTe) and Cu-doped ZnTe (ZnTe:Cu), followed by Ni or Ti as an outer metallization. Secondary ion mass spectroscopy (SIMS) is used to study Cu diffusion within this back-contact structure, and also, to monitor Cu diffusion from the contact into the CdTe. When Ni metallization is used, the ZnTe:Cu layer becomes increasingly depleted of Cu, and Ni diffusion into the ZnTe:Cu increases as the contact deposition temperature increases from 100 C to 300 C. Cu depletion is not observed when Ni is replaced with Ti. Diffusion of Cu from the ZnTe:Cu layer into the ZnTe layer also increases with contact deposition temperature, and produces a buildup of Cu at the ZnTe/CdTe interface. High-mass resolution SIMS indicates that, although Cu levels in the CdTe remain low, Cu diffusion from the contact proceeds into the CdTe layer and toward the CdTe/CdS junction region.

  18. Magnetic hyperfine interactions on Cd sites of the rare-earth cadmium compounds R Cd (R =Ce , Pr, Nd, Sm, Gd, Tb, Dy, Ho, and Er)

    Science.gov (United States)

    Cavalcante, F. H. M.; Leite Neto, O. F. L. S.; Saitovitch, H.; Cavalcante, J. T. P. D.; Carbonari, A. W.; Saxena, R. N.; Bosch-Santos, B.; Pereira, L. F. D.; Mestnik-Filho, J.; Forker, M.

    2016-08-01

    This paper reports the investigation of the magnetic hyperfine field Bh f in a series of rare-earth (R ) cadmium intermetallic compounds R Cd and GdCd2 measured by perturbed angular correlation (PAC) spectroscopy using 111In/111Cd as probe nuclei at Cd sites as well as first-principles calculations of Bh f at Cd sites in the studied compounds. Vapor-solid state reaction of R metals with Cd vapor and the 111In radioisotope was found to be an appropriate route of doping rare-earth cadmium compounds with the PAC probe 111In/111Cd. The observation that the hyperfine parameters depend on details of the sample preparation provides information on the phase preference of diffusing 111In in the rare-earth cadmium phase system. The 111Cd hyperfine field has been determined in the compounds R Cd for the R constituents Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, and Er, in several cases as a function of temperature. For most R constituents, the temperature dependence Bh f(T ) of 111Cd:R Cd is consistent with ferromagnetic order of the compound. DyCd, however, presents a remarkable anomaly: a finite magnetic hyperfine field is observed only in the temperature interval 35 K ≤ T ≤ 80 K which indicates a transition from ferromagnetic order to a spin arrangement where all 4 f -induced contributions to the magnetic hyperfine field at the Cd site cancel. First-principles calculation results for DyCd show that the (π , π , 0) antiferromagnetic configuration is energetically more favorable than the ferromagnetic. The approach used in the calculations to simulate the R Cd system successfully reproduces the experimental values of Bh f at Cd sites and shows that the main contribution to Bh f comes from the valence electron polarization. The de Gennes plot of the hyperfine field Bh f of 111Cd:R Cd vs the 4 f -spin projection (g -1 )J reflects a decrease of the strength of indirect 4 f -4 f exchange across the R series. Possible mechanisms are discussed and the experimental results indicate that

  19. Cadmium (II) and lead (II) transport in a polymer inclusion membrane using tributyl phosphate as mobile carrier and CuFeO(2) as a polarized photo electrode.

    Science.gov (United States)

    Arous, Omar; Amara, Mourad; Trari, Mohamed; Bouguelia, Aissa; Kerdjoudj, Hacène

    2010-08-15

    In this work, a development of polymeric inclusion membranes for the cations separation is reported. The membrane was made up of cellulose triacetate (CTA) with a tributyl phosphate (TBP) incorporated into the polymer as metal ions carrier. The transport of lead (II) and cadmium (II) ions in two membrane systems polymer inclusion membrane (PIM), PIM coupled with photo-chemical electrode using TBP as carrier and 2-nitro phenyl octyl ether (NPOE) or tris ethylhexyl phosphate (TEHP) as plasticizer have been investigated. The membranes: polymer+plasticizer+carrier were synthesized and characterized by FTIR, X-ray diffraction and scanning electron microscopy (SEM). Transports of lead and cadmium have been studied using these systems and the results were compared to commercial cation exchange membrane (CRA). The obtained results showed that for Pb(2+) ion, the concentrations of the strip phase increases using synthesized membranes. The conduction band of the delafossite CuFeO(2) (-1.25 V(SCE)) yields a thermodynamically M(2+) (=Pb(2+), Cd(2+)) photo electrodeposition and speeds up the diffusion process. In all the cases, the potential of the electrode M/M(2+) in the feed compartment increases until a maximum value, reached at approximately 100 min above which it undergoes a diminution.

  20. Catalase Activity in Brown Mussels (Perna perna) under Acute Cadmium, Lead, and Copper Exposure and Depuration Tests

    National Research Council Canada - National Science Library

    Boudjema, Kamel; Kourdali, Sidali; Bounakous, Nabila; Meknachi, Abdellah; Badis, Abdelmalek

    2014-01-01

      Brown mussels (Perna perna) were exposed to cadmium (Cd), lead (Pb), and copper (Cu) concentrations under acute exposure and exposure-depuration tests for the estimation of biochemical biomarker catalase...

  1. Expression differences for genes involved in lignin, glutathione and sulphate metabolism in response to cadmium in Arabidopsis thaliana and the related Zn/Cd-hyperaccumulator Thlaspi caerulescens

    NARCIS (Netherlands)

    Mortel, van de J.E.; Schat, H.; Moerland, P.D.; Loren van Themaat, Ver E.; Ent, van der S.; Blankestijn-de Vries, M.H.C.; Ghandilyan, A.; Tsiatsiani, S.; Aarts, M.G.M.

    2008-01-01

    Cadmium (Cd) is a widespread, naturally occurring element present in soil, rock, water, plants and animals. Cd is a non-essential element for plants and is toxic at higher concentrations. Transcript profiles of roots of Arabidopsis thaliana (Arabidopsis) and Thlaspi caerulescens plants exposed to Cd

  2. Effects of Waterborne Cu and Cd on Anti-oxidative Response, Lipid Peroxidation and Heavy Metals Accumulation in AbaloneHaliotis discus hannai Ino

    Institute of Scientific and Technical Information of China (English)

    LEI Yanju; ZHANG Wenbing; XU Wei; ZHANG Yanjiao; ZHOU Huihui; MAI Kangsen

    2015-01-01

    The aim of this study was to compare the effects of waterborne copper (Cu) and cadmium (Cd) on survival, anti-oxida- tive response, lipid peroxidation and metal accumulation in abaloneHaliotis discus hannai. Experimental animals (initial weight: 7.49g±0.01g) were exposed to graded concentrations of waterborne Cu (0.02, 0.04, 0.06, 0.08mgL-1) or Cd (0.025, 0.05, 0.25, 0.5 mgL-1) for 28 days, respectively. Activities of the anti-oxidative enzymes (catalase, CAT; superoxide dismutase, SOD; glutathione peroxidases, GPx; glutathione S-transferase, GST), contents of the reduced glutathione (GSH) and malondiadehyde (MDA) in the hepatopancreas, and metal accumulation in hepatopancreas and muscles were analyzed after 0, 1, 3, 6, 10, 15, 21, 28 days of metal exposure, respectively. Results showed that 0.04mgL-1, 0.06mgL-1 and 0.08mgL-1 Cu caused 100% death of abalone on the 21st, 10th and 6th day, respectively. However, no dead abalone was found during the 28-day waterborne Cd exposure at all experimental concentrations. Generally, activities of SOD and GST in hepatopancreas under all Cu concentrations followed a decrease trend as the exposure time prolonged. However, these activities were firstly increased and then decreased to the control level and increased again during Cd exposure. Activities of CAT in all Cu exposure treatments were higher than those in the control. These activities were firstly increased and then decreased to the control level and increased again during Cd exposure. Contents of MDA in hepatopancreas in all Cu treatments significantly increased first and then decreased to the control level. However, the MDA contents in hepatopan-creas were not significantly changed during the 28-day Cd exposure. The metals accumulation in both hepatopancreas and muscles of abalone significantly increased with the increase of waterborne metals concentration and exposure time. These results indicated that H. discus hannai has a positive anti-oxidative defense against Cu

  3. Tandem quadruplication of HMA4 in the zinc (Zn) and cadmium (Cd) hyperaccumulator Noccaea caerulescens.

    Science.gov (United States)

    Ó Lochlainn, Seosamh; Bowen, Helen C; Fray, Rupert G; Hammond, John P; King, Graham J; White, Philip J; Graham, Neil S; Broadley, Martin R

    2011-03-10

    Zinc (Zn) and cadmium (Cd) hyperaccumulation may have evolved twice in the Brassicaceae, in Arabidopsis halleri and in the Noccaea genus. Tandem gene duplication and deregulated expression of the Zn transporter, HMA4, has previously been linked to Zn/Cd hyperaccumulation in A. halleri. Here, we tested the hypothesis that tandem duplication and deregulation of HMA4 expression also occurs in Noccaea.A Noccaea caerulescens genomic library was generated, containing 36,864 fosmid pCC1FOS™ clones with insert sizes ∼20-40 kbp, and screened with a PCR-generated HMA4 genomic probe. Gene copy number within the genome was estimated through DNA fingerprinting and pooled fosmid pyrosequencing. Gene copy numbers within individual clones was determined by PCR analyses with novel locus specific primers. Entire fosmids were then sequenced individually and reads equivalent to 20-fold coverage were assembled to generate complete whole contigs.Four tandem HMA4 repeats were identified in a contiguous sequence of 101,480 bp based on sequence overlap identities. These were flanked by regions syntenous with up and downstream regions of AtHMA4 in Arabidopsis thaliana. Promoter-reporter β-glucuronidase (GUS) fusion analysis of a NcHMA4 in A. thaliana revealed deregulated expression in roots and shoots, analogous to AhHMA4 promoters, but distinct from AtHMA4 expression which localised to the root vascular tissue.This remarkable consistency in tandem duplication and deregulated expression of metal transport genes between N. caerulescens and A. halleri, which last shared a common ancestor >40 mya, provides intriguing evidence that parallel evolutionary pathways may underlie Zn/Cd hyperaccumulation in Brassicaceae.

  4. Tandem quadruplication of HMA4 in the zinc (Zn and cadmium (Cd hyperaccumulator Noccaea caerulescens.

    Directory of Open Access Journals (Sweden)

    Seosamh Ó Lochlainn

    Full Text Available Zinc (Zn and cadmium (Cd hyperaccumulation may have evolved twice in the Brassicaceae, in Arabidopsis halleri and in the Noccaea genus. Tandem gene duplication and deregulated expression of the Zn transporter, HMA4, has previously been linked to Zn/Cd hyperaccumulation in A. halleri. Here, we tested the hypothesis that tandem duplication and deregulation of HMA4 expression also occurs in Noccaea.A Noccaea caerulescens genomic library was generated, containing 36,864 fosmid pCC1FOS™ clones with insert sizes ∼20-40 kbp, and screened with a PCR-generated HMA4 genomic probe. Gene copy number within the genome was estimated through DNA fingerprinting and pooled fosmid pyrosequencing. Gene copy numbers within individual clones was determined by PCR analyses with novel locus specific primers. Entire fosmids were then sequenced individually and reads equivalent to 20-fold coverage were assembled to generate complete whole contigs.Four tandem HMA4 repeats were identified in a contiguous sequence of 101,480 bp based on sequence overlap identities. These were flanked by regions syntenous with up and downstream regions of AtHMA4 in Arabidopsis thaliana. Promoter-reporter β-glucuronidase (GUS fusion analysis of a NcHMA4 in A. thaliana revealed deregulated expression in roots and shoots, analogous to AhHMA4 promoters, but distinct from AtHMA4 expression which localised to the root vascular tissue.This remarkable consistency in tandem duplication and deregulated expression of metal transport genes between N. caerulescens and A. halleri, which last shared a common ancestor >40 mya, provides intriguing evidence that parallel evolutionary pathways may underlie Zn/Cd hyperaccumulation in Brassicaceae.

  5. Excellent magnetocaloric properties in RE2Cu2Cd (RE = Dy and Tm) compounds and its composite materials

    Science.gov (United States)

    Zhang, Yikun; Yang, Yang; Xu, Xiao; Geng, Shuhua; Hou, Long; Li, Xi; Ren, Zhongming; Wilde, Gerhard

    2016-09-01

    The magnetic properties and magnetocaloric effect (MCE) of ternary intermetallic RE2Cu2Cd (RE = Dy and Tm) compounds and its composite materials have been investigated in detail. Both compounds undergo a paramagnetic to ferromagnetic transition at its own Curie temperatures of TC ~ 48.5 and 15 K for Dy2Cu2Cd and Tm2Cu2Cd, respectively, giving rise to the large reversible MCE. An additionally magnetic transition can be observed around 16 K for Dy2Cu2Cd compound. The maximum values of magnetic entropy change (-ΔSMmax) are estimated to be 17.0 and 20.8 J/kg K for Dy2Cu2Cd and Tm2Cu2Cd, for a magnetic field change of 0-70 kOe, respectively. A table-like MCE in a wide temperature range of 10-70 K and enhanced refrigerant capacity (RC) are achieved in the Dy2Cu2Cd - Tm2Cu2Cd composite materials. For a magnetic field change of 0-50 kOe, the maximum improvements of RC reach 32% and 153%, in comparison with that of individual compound Dy2Cu2Cd and Tm2Cu2Cd. The excellent MCE properties suggest the RE2Cu2Cd (RE = Dy and Tm) and its composite materials could be expected to have effective applications for low temperature magnetic refrigeration.

  6. [Effect of Ryegrass and Arbuscular Mycorrhizal on Cd Absorption by Varieties of Tomatoes and Cadmium Forms in Soil].

    Science.gov (United States)

    Chen, Yong-qin; Jiang, Ling; Xu, Wei-hong; Chi, Sun-lin; Chen, Xu-gen; Xie, Wen-wen; Xiong, Shi- juan; Zhang, Jin-zhong; Xiong, Zhi-ting

    2015-12-01

    Field trial was carried out to investigate the effects of ryegrass and arbuscular mycorrhizal single or compound treatment to two varieties of tomato ("Defu mm-8" and "Luobeiqi") on the plant growth, concentrations and accumulations of Cd as well as the impact on microorganisms, enzyme activities, pH and Cd forms in soil when exposed to Cd (5.943 mg · kg⁻¹). The results showed that dry weights of fruit, root, stem, leaf and plant significantly increased by single or compound treatment of ryegrass and arbuscular mycorrhizal by 14.1%-38.4% and 4.2%-18.3%, 20.9%-31.5% and 8.4%-10.3%, 13.0%-16.8% and 3.0%-9.5%, 10.7%- 16.8% and 2.7%-7.6%, 14.3%-36.6% and 4.5%-16.8%, respectively. The amounts of bacteria, fungi, actinomycetes of soil and the activities of urease, invertase, acid phosphatase, catalase in soil were increased by single or compound treatment of ryegrass and arbuscular mycorrhizal, and the soil microorganism amounts and enzyme activities significantly differed between the two varieties of tomato and treatments (P Cd, CAB-Cd, Fe-Mn-Cd and total Cd in soil were decreased, and the total Cd content was decreased by 16.9%-27.8%. Cadmium concentrations in fruit, leaf, stem and root of both varieties were significantly decreased by 6.9%-40.9%, 5.7%-40.1%, 4.6%-34.7% and 9.8%-42.4%, respectively. Cadmium accumulations in tomato were in order of leaf > stem > root > fruit. Comparing the two tomato varieties, Cd concentrations and Cd accumulations in fruit and plant were in order of "Luobeiqi" < "Defu mm-8" in the presence or absence of single or compound treatment of ryegrass and arbuscular mycorrhizal.

  7. Microbial toxicity of ionic species leached from the II-VI semiconductor materials, cadmium telluride (CdTe) and cadmium selenide (CdSe).

    Science.gov (United States)

    Ramos-Ruiz, Adriana; Zeng, Chao; Sierra-Alvarez, Reyes; Teixeira, Luiz H; Field, Jim A

    2016-11-01

    This work investigated the microbial toxicity of soluble species that can potentially be leached from the II-VI semiconductor materials, cadmium telluride and cadmium selenide. The soluble ions tested included: cadmium, selenite, selenate, tellurite, and tellurate. Their toxicity towards the acetoclastic and hydrogen-consuming trophic groups in a methanogenic consortium as well as towards a bioluminescent marine bacterium, Aliivibrio fischeri (Microtox(®) test), was assessed. The acetoclastic methanogenic activity was the most affected as evidenced by the low 50% inhibiting concentrations (IC50) values obtained of 8.6 mg L(-1) for both cadmium and tellurite, 10.2 mg L(-1) for tellurate, and 24.1 mg L(-1) for selenite. Both tellurium oxyanions caused a strong inhibition of acetoclastic methanogenesis at low concentrations, each additional increment in concentration provided progressively less inhibition increase. In the case of the hydrogenotrophic methanogenesis, cadmium followed by selenite caused the greatest inhibition with IC50 values of 2.9 and 18.0 mg L(-1), respectively. Tellurite caused a moderate effect as evidenced by a 36.8% inhibition of the methanogenic activity at the highest concentration tested, and a very mild effect of tellurate was observed. Microtox(®) analyses showed a noteworthy inhibition of cadmium, selenite, and tellurite with 50% loss in bioluminescence after 30 min of exposure of 5.5, 171.1, and 458.6 mg L(-1), respectively. These results suggest that the leaching of cadmium, tellurium and selenium ions from semiconductor materials can potentially cause microbial toxicity.

  8. Speciation and behaviour of Cd, Pb and Cu in Zuari Estuary, west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    George

    Dissolved labile and nonlabile forms of Cd, Pb and Cu in Zuari Estuary, Goa, India measured for a period of 14 months showed lowest concentrations during the SW monsoon (June-September) while maximum concentrations were observed during...

  9. Toxicity of Cu and Cd in Soils and Detoxication by Additives

    Institute of Scientific and Technical Information of China (English)

    GUZONG-LIAN; WULIU-SONG; 等

    1991-01-01

    Results from laboratory experiments indicated that the concentrations and toxicities of both water-soluble and 0.1 M HCl-extractable Cu and Cd from soils were in the order of red soil> yellow brown earth> black earth.The toxicity of soil varied with the concentrations of metals.The form,concentration and toxicity of Cu and Cd in soils were determined by cation exchange capacity,content of organic matter and composition of clay minerals in the soil.Addition of CaCO3 could significantly decrease the concentration and toxicity of water-soluble and 0.1 M HCl-extractable Cu or Cd from the red soil,and could notably transform the Cu and Cd from the water-soluble or exchangeable form into the organic,free oxides-occluded or sulfic form.

  10. Accumulation of Trace Metal Elements (Cu, Zn, Cd, and Pb in Surface Sediment via Decomposed Seagrass Leaves: A Mesocosm Experiment Using Zostera marina L.

    Directory of Open Access Journals (Sweden)

    Shinya Hosokawa

    Full Text Available Accumulation of Cu, Zn, Cd, and Pb in the sediment of seagrass ecosystems was examined using mesocosm experiments containing Zostera marina (eelgrass and reference pools. Lead was approximately 20-fold higher in the surface sediment in the eelgrass pool than in eelgrass leaves and epiphytes on the eelgrass leaves, whereas zinc and cadmium were significantly lower in the surface sediment than in the leaves, with intermediate concentrations in epiphytes. Copper concentrations were similar in both the surface sediment and leaves but significantly lower in epiphytes. Carbon and nitrogen contents increased significantly with increasing δ13C in surface sediments of both the eelgrass and reference pools. Copper, Zn, Cd, and Pb also increased significantly with increasing δ13C in the surface sediment in the eelgrass pool but not in the reference pool. By decomposition of eelgrass leaves with epiphytes, which was examined in the eelgrass pool, copper and lead concentrations increased more than 2-fold and approximately a 10-fold, whereas zinc and cadmium concentrations decreased. The high copper and lead concentrations in the surface sediment result from accumulation in decomposed, shed leaves, whereas zinc and cadmium remobilized from decomposed shed leaves but may remain at higher concentrations in the leaves than in the original sediments. The results of our mesocosm study demonstrate that whether the accumulation or remobilization of trace metals during the decomposition of seagrass leaves is trace metal dependent, and that the decomposed seagrass leaves can cause copper and lead accumulation in sediments in seagrass ecosystems.

  11. Accumulation of Trace Metal Elements (Cu, Zn, Cd, and Pb) in Surface Sediment via Decomposed Seagrass Leaves: A Mesocosm Experiment Using Zostera marina L.

    Science.gov (United States)

    Hosokawa, Shinya; Konuma, Susumu; Nakamura, Yoshiyuki

    2016-01-01

    Accumulation of Cu, Zn, Cd, and Pb in the sediment of seagrass ecosystems was examined using mesocosm experiments containing Zostera marina (eelgrass) and reference pools. Lead was approximately 20-fold higher in the surface sediment in the eelgrass pool than in eelgrass leaves and epiphytes on the eelgrass leaves, whereas zinc and cadmium were significantly lower in the surface sediment than in the leaves, with intermediate concentrations in epiphytes. Copper concentrations were similar in both the surface sediment and leaves but significantly lower in epiphytes. Carbon and nitrogen contents increased significantly with increasing δ13C in surface sediments of both the eelgrass and reference pools. Copper, Zn, Cd, and Pb also increased significantly with increasing δ13C in the surface sediment in the eelgrass pool but not in the reference pool. By decomposition of eelgrass leaves with epiphytes, which was examined in the eelgrass pool, copper and lead concentrations increased more than 2-fold and approximately a 10-fold, whereas zinc and cadmium concentrations decreased. The high copper and lead concentrations in the surface sediment result from accumulation in decomposed, shed leaves, whereas zinc and cadmium remobilized from decomposed shed leaves but may remain at higher concentrations in the leaves than in the original sediments. The results of our mesocosm study demonstrate that whether the accumulation or remobilization of trace metals during the decomposition of seagrass leaves is trace metal dependent, and that the decomposed seagrass leaves can cause copper and lead accumulation in sediments in seagrass ecosystems.

  12. Phytoavailability of cadmium (Cd) to Pak choi (Brassica chinensis L.) grown in Chinese soils: a model to evaluate the impact of soil Cd pollution on potential dietary toxicity.

    Science.gov (United States)

    Rafiq, Muhammad Tariq; Aziz, Rukhsanda; Yang, Xiaoe; Xiao, Wendan; Stoffella, Peter J; Saghir, Aamir; Azam, Muhammad; Li, Tingqiang

    2014-01-01

    Food chain contamination by soil cadmium (Cd) through vegetable consumption poses a threat to human health. Therefore, an understanding is needed on the relationship between the phytoavailability of Cd in soils and its uptake in edible tissues of vegetables. The purpose of this study was to establish soil Cd thresholds of representative Chinese soils based on dietary toxicity to humans and develop a model to evaluate the phytoavailability of Cd to Pak choi (Brassica chinensis L.) based on soil properties. Mehlich-3 extractable Cd thresholds were more suitable for Stagnic Anthrosols, Calcareous, Ustic Cambosols, Typic Haplustalfs, Udic Ferrisols and Periudic Argosols with values of 0.30, 0.25, 0.18, 0.16, 0.15 and 0.03 mg kg-1, respectively, while total Cd is adequate threshold for Mollisols with a value of 0.86 mg kg-1. A stepwise regression model indicated that Cd phytoavailability to Pak choi was significantly influenced by soil pH, organic matter, total Zinc and Cd concentrations in soil. Therefore, since Cd accumulation in Pak choi varied with soil characteristics, they should be considered while assessing the environmental quality of soils to ensure the hygienically safe food production.

  13. Band offsets at the CdS/CuInSe[sub 2] heterojunction

    Energy Technology Data Exchange (ETDEWEB)

    Wei, S.; Zunger, A. (National Renewable Energy Laboratory, Golden, Colorado 80401 (United States))

    1993-11-01

    The traditional explanation for the successful electron-hole separation in CdS/CuInSe[sub 2] solar cells rests on the assumption of a type-II band lineup: The conduction-band minimum is assumed to be on the CdS window while the valence-band maximum is assumed to be localized on the CuInSe[sub 2] absorber. This picture of negative conduction-band offset [Delta][ital E][sub [ital c

  14. The effect of cadmium vacancies on the optical properties of chemically prepared CdS quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Madan, Shikha; Kumar, Jitender; Singh, Inderpreet; Madhwal, Devinder; Bhatnagar, P K; Mathur, P C, E-mail: shikhamadan16@gmail.co [Material Science Laboratory, Department of Electronic Science, University of Delhi South Campus, Benito Juarez Road, New Delhi-110021 (India)

    2010-10-15

    CdS quantum dots (QDs) in a polyvinyl alcohol (PVA) matrix have been grown by a chemical method and are characterized by transmission electron microscopy (TEM), UV-vis absorption, photoluminescence (PL) and energy dispersive x-ray diffraction (EDX). TEM studies of CdS films show that a nearly spherical cluster of CdS QDs with an average radius of 10-15 nm is formed. From absorption measurements, it is observed that with increasing the PVA concentration from 5 to 8 wt.%, the absorption edge shifts from 3.1 to 3.6 eV, which is attributed to an increase in quantum confinement with decreasing the QD size. PL studies in an energy range of 1.8-3.3 eV show two distinct peaks. The higher-energy peak corresponds to band edge emission, whereas the lower-energy peak corresponds to defect emission. EDX results revealed that the atomic concentration of cadmium is much lower than that of sulfur, indicating that cadmium vacancies are predominant. It was concluded that cadmium vacancies are mainly responsible for defect emission in the PL spectrum.

  15. Degradation mechanisms studies in CdS/CdTe solar cells with ZnTe:Cu/Au back contact

    Science.gov (United States)

    Morgan, D.; Tang, J.; Kaydanov, V.; Ohno, T. R.; Trefny, J. U.

    1999-03-01

    CdS/CdTe/ZnTe:Cu/Au solar cells were fabricated and tested under stressed conditions including enhanced temperature, forward and reverse bias, open circuit, dark and light. Discussion of results was focused mostly on the development of the back contact Schottky diode (increase in series resistance). Changes in the cell parameters were detected based on the analysis of the dynamic resistance of a cell (dV/dJ) at forward biases. A possible role of electromigration of the Cu dopant was discussed.

  16. Degradation mechanisms studies in CdS/CdTe solar cells with ZnTe:Cu/Au back contact

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, D.; Tang, J.; Kaydanov, V.; Ohno, T.R.; Trefny, J.U. [Department of Physics, Colorado School of Mines, Golden, Colorado 80401 (United States)

    1999-03-01

    CdS/CdTe/ZnTe:Cu/Au solar cells were fabricated and tested under stressed conditions including enhanced temperature, forward and reverse bias, open circuit, dark and light. Discussion of results was focused mostly on the development of the back contact Schottky diode (increase in series resistance). Changes in the cell parameters were detected based on the analysis of the dynamic resistance of a cell (dV/dJ) at forward biases. A possible role of electromigration of the Cu dopant was discussed. {copyright} {ital 1999 American Institute of Physics.}

  17. Data on HepG2 cells changes following exposure to cadmium sulphide quantum dots (CdS QDs

    Directory of Open Access Journals (Sweden)

    Laura Paesano

    2017-04-01

    Full Text Available The data included in this paper are associated with the research article entitled "Markers for toxicity to HepG2 exposed to cadmium sulphide quantum dots; damage to mitochondria" (Paesano et al. [1]. The article concerns the cytotoxic and genotoxic effects of CdS QDs in HepG2 cells and the mechanisms involved. In this dataset, changes in expression levels of candidate genes are reported, together with details concerning synthesis and properties of CdS QDs, additional information obtained through literature survey, measures of the mitochondrial membrane potential and the glutathione redox state.

  18. Effects of heat treatment on diffusion of Cu atoms into CdTe single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Soo, Y. L. [Department of Physics, State University of New York at Buffalo, Amherst, New York 14260 (United States); Huang, S. [Department of Physics, State University of New York at Buffalo, Amherst, New York 14260 (United States); Kim, S. [Department of Physics, State University of New York at Buffalo, Amherst, New York 14260 (United States); Kioseoglou, G. [Department of Physics, State University of New York at Buffalo, Amherst, New York 14260 (United States); Kao, Y. H. [Department of Physics, State University of New York at Buffalo, Amherst, New York 14260 (United States); Compaan, A. D. [Department of Physics and Astronomy, University of Toledo, Toledo, Ohio 43606 (United States); Grecu, D. [Department of Physics and Astronomy, University of Toledo, Toledo, Ohio 43606 (United States); Albin, D. [National Renewable Energy Laboratory, 1617 Cole Boulevard, Golden, Colorado 80401 (United States)

    2000-06-19

    Angular dependence of x-ray fluorescence and x-ray absorption fine structure techniques have been used to study the diffusion of Cu atoms into the photovoltaic material CdTe. Depth profile, effective valency, and local structure of Cu atoms in a Cu-doped single crystal of CdTe were investigated before and after a second heat treatment. Enhanced Cu diffusion into the CdTe single crystal was observed as a result of heating at a moderate temperature around 200 degree sign C, resulting in a redistribution of the Cu impurities through a broader depth profile. Some of the Cu atoms are believed either to form small complexes with Te or occupy interstitial sites in the host but accompanied by a large local lattice distortion while others substitute for Cd on the cation sites. The results thus demonstrate that these nondestructive x-ray characterization methods are useful for probing microstructural changes in CdTe photovoltaic materials/devices in which some Cu-containing compounds are used as back contacts. (c) 2000 American Institute of Physics.

  19. PENINGKATAN KUALITAS FILM TIPIS CdTe SEBAGAI ABSORBER SEL SURYA DENGAN MENGGUNAKAN DOPING TEMBAGA (Cu

    Directory of Open Access Journals (Sweden)

    P. Marwoto

    2012-12-01

    Full Text Available Film tipis CdTe dengan doping tembaga (Cu berkonsenterasi 2% telah berhasil ditumbuhkan di atas substrat Indium Tin Oxide (ITO dengan metode dc magnetron sputtering. Penelitian ini dilakukan untuk mengetahui pengaruh doping Cu(2% terhadap struktur morfologi, struktur kristal, fotoluminisensi dan resistivitas listrik film CdTe. Citra morfologi Scanning Electron Microscopy (SEM dan hasil analisis struktur dengan X-Ray Diffraction (XRD menunjukkan bahwa film CdTe:Cu(2% mempunyai citra permukaan dan struktur kristal yang lebih sempurna dibandingkan film CdTe tanpa doping. Hasil analisis spektrometer fotoluminisensi menunjukkan bahwa film CdTe dan CdTe(2% mempunyai puncak fotoluminisensi pada tiga panjang gelombang yang identik yaitu 685 nm (1,81 eV, 725 nm (1,71 eV dan 740 nm (1,67 eV. Film CdTe dengan doping Cu(2% memiliki intensitas puncak fotoluminisensi yang lebih tajam pada pita energi 1,81 eV dibandingkan dengan film CdTe tanpa doping. Pengukuran arus dan tegangan (I-V menunjukkan bahwa pemberian doping Cu(2% dapat menurunkan resistivitas film dari 8,40x109 Ωcm menjadi 6,92x105 Ωcm. Sebagai absorber sel surya, kualitas film tipis CdTe telah berhasil ditingkatkan dengan pemberian doping Cu(2%.CdTe:Cu(2% thin film has been successfully grown on Indium Tin Oxide (ITO substrates by using dc magnetron sputtering. This study was carried out in order to investigate the effect of Cu(2% doping on the morphologycal structure, crystal structure, photoluminesence, and resistivity of CdTe thin film. Scanning Electron Microscopy (SEM  images and X-Ray Diffraction (XRD results showed that CdTe:Cu(2% thin film has morphologycal and crystal structures more perfect than undoped CdTe film. Photoluminesence spectroscopy results showed that CdTe and CdTe:Cu(2% thin films have luminesence peak at three identical wevelength regions i.e. 685 nm (1.81 eV, 725 nm (1.71 eV and 740 nm (1.67 eV however CdTe:Cu(2% film shows sharper photoluminescence peak at band

  20. Characterization of cadmium ((108)Cd) distribution and accumulation in Tagetes erecta L. seedlings: effect of split-root and of remove-xylem/phloem.

    Science.gov (United States)

    Qin, Qin; Li, Xuemei; Wu, Haiyan; Zhang, Yinqiu; Feng, Qian; Tai, Peidong

    2013-11-01

    Tagetes erecta has a high potential for cadmium (Cd) phytoremediation. Through several hydroponic experiments, characteristics of (108)Cd distribution and accumulation were investigated in T. erecta with split -roots or removed xylem/phloem. The results showed that (108)Cd transport from roots to aboveground tissues showed the homolateral transport phenomenon in split-root seedlings. (108)Cd content of leaves on the +(108)Cd side and the -(108)Cd side was not significantly different, which implied that there was horizontal transport of (108)Cd from the +(108)Cd side to the -(108)Cd side in cut-root seedlings. Like (108)Cd transport, the transport of (70)Zn was homolateral. Reduction of water consumption in the removed xylem treatment significantly decreased (108)Cd accumulation; whereas, the removed phloem treatment had no significant effect on water consumption, but did decrease (108)Cd accumulation in leaves of the seedlings. The removal of phloem significantly reduced distal leaf (108)Cd content, which was significantly lower than that in the basal leaves in both the split-root and unsplit-root seedlings. Overall, the results presented in this study revealed that the root to aboveground cadmium translocation via phloem is as an important and common physiological process as xylem determination of the cadmium accumulation in stems and leaves of marigold seedlings. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. Effect of biochar on the extractability of heavy metals (Cd, Cu, Pb, and Zn) and enzyme activity in soil.

    Science.gov (United States)

    Yang, Xing; Liu, Jingjing; McGrouther, Kim; Huang, Huagang; Lu, Kouping; Guo, Xi; He, Lizhi; Lin, Xiaoming; Che, Lei; Ye, Zhengqian; Wang, Hailong

    2016-01-01

    Biochar is a carbon-rich solid material derived from the pyrolysis of agricultural and forest residual biomass. Previous studies have shown that biochar is suitable as an adsorbent for soil contaminants such as heavy metals and consequently reduces their bioavailability. However, the long-term effect of different biochars on metal extractability or soil health has not been assessed. Therefore, a 1-year incubation experiment was carried out to investigate the effect of biochar produced from bamboo and rice straw (at temperatures ≥500 °C) on the heavy metal (cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn)) extractability and enzyme activity (urease, catalase, and acid phosphatase) in a contaminated sandy loam paddy soil. Three rates (0, 1, and 5%) and two mesh sizes (straw biochar significantly (P straw biochar significantly (P straw biochar resulted in the greatest reductions of extractable Cu and Zn, 97.3 and 62.2%, respectively. Both bamboo and rice straw biochar were more effective at decreasing extractable Cu and Pb than removing extractable Cd and Zn from the soil. Urease activity increased by 143 and 107% after the addition of 5% coarse and fine rice straw biochars, respectively. Both bamboo and rice straw biochars significantly (P impact on acid phosphatase activity. In conclusion, the rice straw biochar had greater potential as an amendment for reducing the bioavailability of heavy metals in soil than that of the bamboo biochar. The impact of biochar treatment on heavy metal extractability and enzyme activity varied with the biochar type, application rate, and particle size.

  2. Heterojunction formation in (CdZn)S/CuInSe2 ternary solar cells

    Science.gov (United States)

    Ahrenkiel, R. K.; Kazmerski, L. L.; Matson, R. J.; Osterwald, C.; Massopust, T. P.; Mickelsen, R. A.; Chen, W. S.

    1983-10-01

    The electrical properties of (CdZn)S/CuInSe2 solar cells have been investigated by combining electron beam induced current measurements and capacitance-voltage measurements on the same device. In the as-grown device, the CuInSe2 is lightly doped n type. After baking to about 225 C in vacuum, the CuInSe2 converts to p type forming the heterojunction. Oxygen does not appear to be necessary for type conversion to occur.

  3. Acute toxicity of binary and ternary mixtures of Cd, Cu, and Zn to Daphnia magna.

    Science.gov (United States)

    Meyer, Joseph S; Ranville, James F; Pontasch, Mandee; Gorsuch, Joseph W; Adams, William J

    2015-04-01

    Standard static-exposure acute lethality tests were conducted with Daphnia magna neonates exposed to binary or ternary mixtures of Cd, Cu, and Zn in moderately hard reconstituted water that contained 3 mg dissolved organic carbon/L added as Suwannee River fulvic acid. These experiments were conducted to test for additive toxicity (i.e., the response to the mixture can be predicted by combining the responses obtained in single-metal toxicity tests) or nonadditive toxicity (i.e., the response is less than or greater than additive). Based on total metal concentrations (>90% dissolved) the toxicity of the tested metal mixtures could be categorized into all 3 possible additivity categories: less-than-additive toxicity (e.g., Cd-Zn and Cd-Cu-Zn mixtures and Cd-Cu mixtures when Cu was titrated into Cd-containing waters), additive toxicity (e.g., some Cu-Zn mixtures), or more-than-additive toxicity (some Cu-Zn mixtures and Cd-Cu mixtures when Cd was titrated into Cu-containing waters). Exposing the organisms to a range of sublethal to supralethal concentrations of the titrated metal was especially helpful in identifying nonadditive interactions. Geochemical processes (e.g., metal-metal competition for binding to dissolved organic matter and/or the biotic ligand, and possibly supersaturation of exposure waters with the metals in some high-concentration exposures) can explain much of the observed metal-metal interactions. Therefore, bioavailability models that incorporate those geochemical (and possibly some physiological) processes might be able to predict metal mixture toxicity accurately.

  4. Structure and properties of YBa2Cu3O7-δ superconductor doped with bulk cadmium oxide

    Directory of Open Access Journals (Sweden)

    A Echresh

    2010-09-01

    Full Text Available In this paper, the Y1-xCdxBa2Cu3O7-δ superconductor with x=0, 0.05, 0.1, 0.15, 0.2, 0.3, 0.4, 0.5 are prepared using the solid state method and the structure, electrical resistance, critical current density and critical temperature of it, have been studied. The results show that these doping do not affect so much on the structure and lattice parameters. The electrical resistance of samples increased with doping. A little amount of doping cadmium improve critical current density such that the sample x=0.1 has a maximum critical current density among the samples. The critical temperature with doping cadmium up to x=0.2 has little fluctuation and its variation can be ignored, but by increasing up to x=0.5 the critical temperature decreases gradually.

  5. Whole-body aerosol exposure of cadmium chloride (CdCl{sub 2}) and tetrabromobisphenol A (TBBPA) induced hepatic changes in CD-1 male mice

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yuanhong; Hu, Yabing; Liu, Shuyun; Zheng, Huiying; Wu, Xiaojuan; Huang, Zhengyu; Li, Hao; Peng, Baoqi; Long, Jinlie [Institute of Environmental Safety and Human Health, Wenzhou Medical University, Wenzhou 325035 (China); Pan, Bishu [Taizhou Center for Disease Control and Prevention, Taizhou 318000 (China); Huang, Changjiang, E-mail: cjhuang5711@163.com [Institute of Environmental Safety and Human Health, Wenzhou Medical University, Wenzhou 325035 (China); Dong, Qiaoxiang, E-mail: dqxdong@163.com [Institute of Environmental Safety and Human Health, Wenzhou Medical University, Wenzhou 325035 (China)

    2016-11-15

    Highlights: • Hepatotoxicity of TBBPA and Cd aerosol co-exposure was evaluated in CD-1 male mice. • Hepatic changes include focal necrosis, increased organ weight, and elevated enzymes. • TBBPA group exhibited highest hepatic toxicity followed by co-exposure and Cd groups. • We did not observe any synergistic effect of hepatic toxicity between TBBPA and Cd. • TBBPA/Cd suppressed antioxidant defensive mechanisms and increased oxidative stress. - Abstract: Cadmium (Cd) and tetrabromobisphenol A (TBBPA) are two prevalent contaminants in e-waste recycling facilities. However, the potential adversely health effect of co-exposure to these two types of pollutants in an occupational setting is unknown. In this study, we investigated co-exposure of these two pollutants on hepatic toxicity in CD-1 male mice through a whole-body aerosol inhalation route. Specifically, mice were exposed to solvent control (5% DMSO), Cd (8 μg/m{sup 3}), TBBPA (16 μg/m{sup 3}) and Cd/TBBPA mixture for 8 h/day and 6 days a week for 60 days. Hepatic changes include increased organ weight, focal necrosis, and elevated levels of liver enzymes in serum. These changes were most severe in mice exposed to TBBPA, followed by Cd/TBBPA mixture and Cd. These chemicals also led to suppressed antioxidant defensive mechanisms and increased oxidative stress. Further, these chemicals induced gene expression of apoptosis-related genes, activated genes encoding for phase I detoxification enzymes and inhibited genes encoding for phase II detoxification enzymes. These findings indicate that the hepatic damages induced by subchronic aerosol exposure of Cd and TBBPA may result from the oxidative damages caused by excessive ROS production when these chemicals were metabolized in the liver.

  6. Distribution of various forms of Cd, Pb and Cu in the Wadge Bank region (Arabian Sea)

    Digital Repository Service at National Institute of Oceanography (India)

    George, M.D.

    Labile, nonlabile and particulate forms of Cd,Pb and Cu were determined in 29 water samples collected from a depth of 5 m, from the Wadge Bank area. Labile Cd varied from 0.1 to 0.2 mu g.l-1 while nonlabile fraction was in the range 0.1 to 0.3 mu gl...

  7. The CdS/CdSe/ZnS Photoanode Cosensitized Solar Cells Basedon Pt, CuS, Cu2S, and PbS Counter Electrodes

    Directory of Open Access Journals (Sweden)

    Tung Ha Thanh

    2014-01-01

    Full Text Available Highly ordered mesoporous TiO2 modified by CdS, CdSe, and ZnS quantum dots (QDs was fabricated by successive ionic layer adsorption and reaction (SILAR method. The quantity of material deposition seems to be affected not only by the employed deposition method but also and mainly by the nature of the underlying layer. The CdS, CdSe, and ZnS QDs modification expands the photoresponse range of mesoporous TiO2 from ultraviolet region to visible range, as confirmed by UV-Vis spectrum. Optimized anode electrodes led to solar cells producing high current densities. Pt, CuS, PbS, and Cu2S have been used as electrocatalysts on counter electrodes. The maximum solar conversion efficiency reached in this work was 1.52% and was obtained by using Pt electrocatalyst. CuS, PbS, and Cu2S gave high currents and this was in line with the low charge transfer resistances recorded in their case.

  8. Carrier providers or killers: The case of Cu defects in CdTe

    Science.gov (United States)

    Yang, Ji-Hui; Metzger, Wyatt K.; Wei, Su-Huai

    2017-07-01

    Defects play important roles in semiconductors for optoelectronic applications. Common intuition is that defects with shallow levels act as carrier providers and defects with deep levels are carrier killers. Here, taking the Cu defects in CdTe as an example, we show that relatively shallow defects can play both roles. Using first-principles calculation methods combined with thermodynamic simulations, we study the dialectic effects of Cu-related defects on hole density and lifetime in bulk CdTe. Because CuCd can form a relatively shallow acceptor, we find that increased Cu incorporation into CdTe indeed can help achieve high hole density; however, too much Cu can cause significant non-radiative recombination. We discuss strategies to balance the contradictory effects of Cu defects based on the calculated impact of Cd chemical potential, copper defect concentrations, and annealing temperature on lifetime and hole density. These findings advance the understanding of the potential complex defect behaviors of relatively shallow defect states in semiconductors.

  9. Spray Deposition of High Quality CuInSe2 and CdTe Films: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, C. J.; van Hest, M.; Miedaner, A.; Leisch, J.; Hersh, P.; Nekuda, J.; Ginley, D. S.

    2008-05-01

    A number of different ink and deposition approaches have been used for the deposition of CuInSe2 (CIS), Cu(In,Ga)Se2 (CIGS), and CdTe films. For CIS and CIGS, soluble precursors containing Cu, In, and Ga have been developed and used in two ways to produce CIS films. In the first, In-containing precursor films were sprayed on Mo-coated glass substrates and converted by rapid thermal processing (RTP) to In2Se3. Then a Cu-containing film was sprayed down on top of the In2Se3 and the stacked films were again thermally processed to give CIS. In the second approach, the Cu-, In-, and Ga-containing inks were combined in the proper ratio to produce a mixed Cu-In-Ga ink that was sprayed on substrates and thermally processed to give CIGS films directly. For CdTe deposition, ink consisting of CdTe nanoparticles dispersed in methanol was prepared and used to spray precursor films. Annealing these precursor films in the presence of CdCl2 produced large-grained CdTe films. The films were characterized by x-ray diffraction (XRD) and scanning electron microscopy (SEM). Optimized spray and processing conditions are crucial to obtain dense, crystalline films.

  10. Carrier providers or killers: The case of Cu defects in CdTe

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ji-Hui; Metzger, Wyatt K.; Wei, Su-Huai

    2017-07-24

    Defects play important roles in semiconductors for optoelectronic applications. Common intuition is that defects with shallow levels act as carrier providers and defects with deep levels are carrier killers. Here, taking the Cu defects in CdTe as an example, we show that relatively shallow defects can play both roles. Using first-principles calculation methods combined with thermodynamic simulations, we study the dialectic effects of Cu-related defects on hole density and lifetime in bulk CdTe. Because CuCd can form a relatively shallow acceptor, we find that increased Cu incorporation into CdTe indeed can help achieve high hole density; however, too much Cu can cause significant non-radiative recombination. We discuss strategies to balance the contradictory effects of Cu defects based on the calculated impact of Cd chemical potential, copper defect concentrations, and annealing temperature on lifetime and hole density. These findings advance the understanding of the potential complex defect behaviors of relatively shallow defect states in semiconductors.

  11. Creation of RT-FM in CdO nanocrystalline powder by codoping with Cu and Gd: Effect of annealing in hydrogen atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Bououdina, M., E-mail: mboudina@gmail.com [Department of Physics, College of Science, University of Bahrain, P.O. Box 32038 (Bahrain); Nanotechnology Centre, University of Bahrain, P.O. Box 32038 (Bahrain); Dakhel, A.A. [Department of Physics, College of Science, University of Bahrain, P.O. Box 32038 (Bahrain)

    2014-07-15

    Highlights: • FM behaviour at room temperature was observed in CdO. • Gd transforms diamagnetic CdO into paramagnetic. • FM component disappear for high Gd content. • Hydrogenation induce drastic changes in magnetic properties. - Abstract: Cadmium oxide codoped with Cu and Gd ions powders were synthesised by simultaneous thermal co-decomposition of a mixture of cadmium acetate dihydrate, bis(acetylacetonato)copper, and tris(acetylacetonato)gadolinium(III) complexes. The mass ratio of Cu/Cd is fixed while the Gd/Cd mass ratio varied systematically. The purpose of the present study is to prepare powders having room temperature ferromagnetic (RT-FM) properties. Thus, an amount from each powder was annealed in hydrogen atmosphere in order to study its influence on the magnetic properties. X-ray fluorescence (XRF) and X-ray diffraction (XRD) methods confirm the purity and the formation of single nanocrystalline structure of the as-prepared powders, thus, both Cu and Gd ions were incorporated into CdO lattice forming solid solutions. Magnetic measurements reveal that all doped CdO powders gained paramagnetic (PM) properties where the susceptibility increases linearly with increasing dopant Gd content; the measured effective magnetic moment of doped Gd{sup 3+} was 7μ{sub B}. Furthermore, the created RT-FM is dependent on the Gd% doping level. Also, it was found that the hydrogenation of the powders slightly enhances their PM properties and strongly enhances or creates RT-FM. For hydrogenated CdO powder doped with 3.1% Gd, the coercivity (H{sub c}), remanence (M{sub r}), and saturation magnetization (M{sub s}) were 283.2 Oe, 2.04 memu/g, and 6.67 memu/g, respectively. Also, under hydrogenation, the values of H{sub c}, M{sub r}, and M{sub s} were increased by ∼145%, 476%, and 131%, respectively in comparison with as prepared. Thus it was proved, for the first time, the possibility of production of CdO with RT-FM, where magnetic characteristics can be tailored by

  12. Surface functionalized Cu{sub 2}Zn{sub 1-x}Cd{sub x}SnS{sub 4} quinternary alloyed nanostructure for DNA sensing

    Energy Technology Data Exchange (ETDEWEB)

    Ibraheam, A.S.; Voon, C.H.; Foo, K.L.; Azizah, N. [University Malaysia Perlis, Institute of Nano Electronic Engineering, Kangar, Perlis (Malaysia); Al-Douri, Y. [University of Sidi-Bel-Abbes, Physics Department, Faculty of Science, Sidi Bel-Abbes (Algeria); Gopinath, S.C.B. [University Malaysia Perlis, Institute of Nano Electronic Engineering, Kangar, Perlis (Malaysia); Universiti Malaysia Perlis, School of Bioprocess Engineering, Arau, Perlis (Malaysia); Ameri, M. [Universite Djilali Liabes de Sidi Bel-Abbes, Laboratoire Physico-Chimie des Materiaux Avances (LPCMA), Sidi Bel-Abbes (Algeria); Ibrahim, Sattar S. [University of Anbar, Chemisty Department, College of Science, Al Rumadi (Iraq)

    2017-03-15

    A sensing plate of extended Cu{sub 2}Zn{sub 1-x}Cd{sub x}SnS{sub 4} quinternary alloy nanostructures, fabricated on an oxidized silicon substrate by the sol-gel method, is reported in this paper. The fabricated device was characterized and analyzed via field emission-scanning electron microscopy, X-ray diffraction (XRD), and photoluminescence (PL). The XRD peaks shifted towards the lower angle side alongside increasing concentration of cadmium. The average diameter of the Cu{sub 2}Zn{sub 1-x}Cd{sub x}SnS{sub 4} quinternary alloy nanostructures falls between 21.55 and 43.12 nm, while the shift of the PL bandgap was from 1.81 eV (x = 0) to 1.72 eV (x = 1). The resulting Cu{sub 2}Zn{sub 1-x}Cd{sub x}SnS{sub 4} quinternary alloy nanostructures components were functionalized with oligonucleotides probe DNA molecules and interacted with the target, exhibiting good sensing capabilities due to its large surface-to-volume ratio. The fabrication, immobilization, and hybridization processes were analyzed via representative current-voltage (I-V) plots. Its electrical profile shows that the device is capable to distinguish biomolecules. Its high performance was evident from the linear relationship between the probe DNA from cervical cancer and the target DNA, showing its applicability for medical applications. (orig.)

  13. Bovine serum albumin-Cu(II) hybrid nanoflowers: An effective adsorbent for solid phase extraction and slurry sampling flame atomic absorption spectrometric analysis of cadmium and lead in water, hair, food and cigarette samples

    Energy Technology Data Exchange (ETDEWEB)

    Yilmaz, Erkan [Department of Chemistry, Faculty of Sciences, Erciyes University, Kayseri 38039 (Turkey); Ocsoy, Ismail [Department of Analytical Chemistry, Faculty of Pharmacy, Erciyes University, Kayseri 38039 (Turkey); Nanotechnology Research Center (ERNAM), Erciyes University, Kayseri 38039 (Turkey); Ozdemir, Nalan [Department of Chemistry, Faculty of Sciences, Erciyes University, Kayseri 38039 (Turkey); Soylak, Mustafa, E-mail: soylak@erciyes.edu.tr [Department of Chemistry, Faculty of Sciences, Erciyes University, Kayseri 38039 (Turkey)

    2016-02-04

    Herein, the synthesis of bovine serum albumin-Cu(II) hybrid nanoflowers (BSA-NFs) through the building blocks of bovine serum albumin (BSA) and copper(II) ions in phosphate buffered saline (PBS) and their use as adsorbent for cadmium and lead ions are reported. The BSA-NFs, for the first time, were efficiently utilized as novel adsorbent for solid phase extraction (SPE) of cadmium and lead ions in water, food, cigarette and hair samples. The method is based on the separation and pre-concentration of Cd(II) and Pb(II) by BSA-NFs prior to determination by slurry analysis via flame atomic absorption spectrometry (FAAS). The analytes were adsorbed on BSA-NFs under the vortex mixing and then the ion-loaded slurry was separated and directly introduced into the flame AAS nebulizer by using a hand-made micro sample introduction system to eliminate a number of drawbacks. The effects of analytical key parameters, such as pH, amount of BSA-NFs, vortexing time, sample volume, and matrix effect of foreign ions on adsorbing of Cd(II) and Pb(II) were systematically investigated and optimized. The limits of detection (LODs) for Cd(II) and Pb(II) were calculated as 0.37 μg L{sup −1} and 8.8 μg L{sup −1}, respectively. The relative standard deviation percentages (RSDs) (N = 5) for Cd(II) and Pb(II) were 7.2%, and 5.0%, respectively. The accuracy of the developed procedure was validated by the analysis of certified reference materials (TMDA-53.3 Fortified Water, TMDA-70 Fortified Water, SPS-WW2 Waste Water, NCSDC-73349 Bush Branches and Leaves) and by addition/recovery analysis. The quantitative recoveries were obtained for the analysis of certified reference materials and addition/recovery tests. The method was successfully applied to the analysis of cadmium and lead in water, food, cigarette and hair samples. - Highlights: • The synthesis of bovine serum albumin-Cu(II) hybrid nanoflowers is reported. • The nanoflowers were utilized for solid phase microextraction of

  14. Direct Method for Determination of Al, Cd, Cu, and Pb in Beers In Situ Digested by GF AAS Using Permanent Modifiers.

    Science.gov (United States)

    de Oliveira Borges, Simone Soares; Beinner, Mark Anthony; Silva, José Bento Borba

    2015-09-01

    The object of the present study was to development of safe, reliable fast, and efficient methodologies for the direct determination of Al, Pb, Cu, and Cd in non-digested beer samples of widely consumed brand name beers sold in Brazil, using graphite furnace absorption spectrometry (GF AAS). Pyrolysis and atomization temperature curves of selected chemical modifiers (iridium, rhodium, ruthenium, zirconium, and non-modifier use) were used to stabilize each metal and sensitivity in a beer sample was diluted to 1:1 with 0.2 % v/v nitric acid after degasification. The best modifier for aluminum was permanent zirconium, with a characteristic mass of 4.2 pg (recommended is 10 pg), demonstrating a symmetrical peak with a corrected background using a deuterium arc lamp. For cadmium and copper, the best modifier was permanent ruthenium with characteristic masses of 0.3 and 7 pg (recommended are 0.35 and 4 pg, respectively, for Cd and Cu), respectively. The best condition for lead was using a non-modifier, with a characteristic mass of 6.9 pg (recommended is 10 pg). The limits of detection and mean recoveries, done over three consecutive days for aluminum, copper, lead, and cadmium, were 1.9, 2.9, 0.8, and 0.6 pg and 105, 104, 101, and 102 %, respectively. From the observed results, we may conclude that some metals, such as Al, Cd, Cu, and Pb, can be determined easily with graphite furnace atomic absorption spectrometry without sample digestion using a dilute nitric acid solution.

  15. Enhanced Heavy Metal Tolerance and Accumulation by Transgenic Sugar Beets Expressing Streptococcus thermophilus StGCS-GS in the Presence of Cd, Zn and Cu Alone or in Combination.

    Directory of Open Access Journals (Sweden)

    Dali Liu

    Full Text Available Phytoremediation is a promising means of ameliorating heavy metal pollution through the use of transgenic plants as artificial hyperaccumulators. A novel Streptococcus thermophilus γ-glutamylcysteine synthetase-glutathione synthetase (StGCS-GS that synthesizes glutathione (GSH with limited feedback inhibition was overexpressed in sugar beet (Beta vulgaris L., yielding three transgenic lines (s2, s4 and s5 with enhanced tolerance to different concentrations of cadmium, zinc and copper, as indicated by their increased biomass, root length and relative growth compared with wild-type plants. Transgenic sugar beets accumulated more Cd, Zn and Cu ions in shoots than wild-type, as well as higher GSH and phytochelatin (PC levels under different heavy metal stresses. This enhanced heavy metal tolerance and increased accumulation were likely due to the increased expression of StGCS-GS and consequent overproduction of both GSH and PC. Furthermore, when multiple heavy metal ions were present at the same time, transgenic sugar beets overexpressing StGCS-GS resisted two or three of the metal combinations (50 μM Cd-Zn, Cd-Cu, Zn-Cu and Cd-Zn-Cu, with greater absorption in shoots. Additionally, there was no obvious competition between metals. Overall, the results demonstrate the explicit role of StGCS-GS in enhancing Cd, Zn and Cu tolerance and accumulation in transgenic sugar beet, which may represent a highly promising new tool for phytoremediation.

  16. Enhanced Heavy Metal Tolerance and Accumulation by Transgenic Sugar Beets Expressing Streptococcus thermophilus StGCS-GS in the Presence of Cd, Zn and Cu Alone or in Combination.

    Science.gov (United States)

    Liu, Dali; An, Zhigang; Mao, Zijun; Ma, Longbiao; Lu, Zhenqiang

    2015-01-01

    Phytoremediation is a promising means of ameliorating heavy metal pollution through the use of transgenic plants as artificial hyperaccumulators. A novel Streptococcus thermophilus γ-glutamylcysteine synthetase-glutathione synthetase (StGCS-GS) that synthesizes glutathione (GSH) with limited feedback inhibition was overexpressed in sugar beet (Beta vulgaris L.), yielding three transgenic lines (s2, s4 and s5) with enhanced tolerance to different concentrations of cadmium, zinc and copper, as indicated by their increased biomass, root length and relative growth compared with wild-type plants. Transgenic sugar beets accumulated more Cd, Zn and Cu ions in shoots than wild-type, as well as higher GSH and phytochelatin (PC) levels under different heavy metal stresses. This enhanced heavy metal tolerance and increased accumulation were likely due to the increased expression of StGCS-GS and consequent overproduction of both GSH and PC. Furthermore, when multiple heavy metal ions were present at the same time, transgenic sugar beets overexpressing StGCS-GS resisted two or three of the metal combinations (50 μM Cd-Zn, Cd-Cu, Zn-Cu and Cd-Zn-Cu), with greater absorption in shoots. Additionally, there was no obvious competition between metals. Overall, the results demonstrate the explicit role of StGCS-GS in enhancing Cd, Zn and Cu tolerance and accumulation in transgenic sugar beet, which may represent a highly promising new tool for phytoremediation.

  17. Whole-body aerosol exposure of cadmium chloride (CdCl2) and tetrabromobisphenol A (TBBPA) induced hepatic changes in CD-1 male mice.

    Science.gov (United States)

    Chen, Yuanhong; Hu, Yabing; Liu, Shuyun; Zheng, Huiying; Wu, Xiaojuan; Huang, Zhengyu; Li, Hao; Peng, Baoqi; Long, Jinlie; Pan, Bishu; Huang, Changjiang; Dong, Qiaoxiang

    2016-11-15

    Cadmium (Cd) and tetrabromobisphenol A (TBBPA) are two prevalent contaminants in e-waste recycling facilities. However, the potential adversely health effect of co-exposure to these two types of pollutants in an occupational setting is unknown. In this study, we investigated co-exposure of these two pollutants on hepatic toxicity in CD-1 male mice through a whole-body aerosol inhalation route. Specifically, mice were exposed to solvent control (5% DMSO), Cd (8μg/m(3)), TBBPA (16μg/m(3)) and Cd/TBBPA mixture for 8h/day and 6days a week for 60 days. Hepatic changes include increased organ weight, focal necrosis, and elevated levels of liver enzymes in serum. These changes were most severe in mice exposed to TBBPA, followed by Cd/TBBPA mixture and Cd. These chemicals also led to suppressed antioxidant defensive mechanisms and increased oxidative stress. Further, these chemicals induced gene expression of apoptosis-related genes, activated genes encoding for phase I detoxification enzymes and inhibited genes encoding for phase II detoxification enzymes. These findings indicate that the hepatic damages induced by subchronic aerosol exposure of Cd and TBBPA may result from the oxidative damages caused by excessive ROS production when these chemicals were metabolized in the liver.

  18. Electrochemical method for improving the spectral response of CdS/Cu 2S heterojunctions

    Science.gov (United States)

    Garcia-Camarero, E.; Arjona, F.; Fatas, E.

    The effect on the stoichiometry of a copper sulphide electrode of short-circuiting the Cu/Cu aq2+/Cu 2-δS/In galvanic cell for different times has been studied. This treatment has been carried out on the copper sulphide layer of CdS/Cu 2S solar cells prepared by different methods. The resulting changes of the spectral short circuit current and the I-V characteristics of the cells have been recorded. Remarkable increases in open circuit voltage, short circuit current, and fill factor have been observed as a consequence of any transformation that increases the proportion of copper in the copper sulphide films. Thus, this treatment could be a suitable method of improving the efficiency of CdS/Cu 2S solar cells.

  19. Hydrothermal syntheses and characterization of two novel luminescent Cadmium(II) frameworks: From 1D infinite triple Cd-(trz)-Cd bridges to a rare I2O0 network with 2D Cd-Br-Cd inorganic connectivity

    Science.gov (United States)

    Liu, Shi Xin; Li, Jian Hui; Wang, You You; Wu, Xiang Xia; Huo, Jian Zhong; Ding, Bin; Wang, Xiu Guang; Zhu, Zhao Zhou; Xia, Jun

    2015-05-01

    Using the 4-substituted-1,2,4-triazole derivate ligand 4-p-tolyl-1,2,4-triazole (L), two novel luminescent Cadmium(II) frameworks, namely {[Cd(μ2-L)3]·(NO3)2·L}n (1) and [Cd1.5(μ2-L)(μ2-Br)2(μ3-Br)]n (2) have been isolated under hydrothermal conditions. The structural analysis reveals that 1 presents a one-dimensional (1D) chain structural motif containing novel infinite triple Cd-(trz)-Cd bridges (triply trz-bridged M-M species). While 2 presents a rare I2O0 type framework, in which the infinite 2D Cd-Br-Cd inorganic connectivity with a 4-connected Kagome topology can be observed. The FT-IR, PXRD and thermal stabilities of 1-2 have investigated. The solid-state photo-luminescent spectra of organic ligand L and 1-2 also have been measured indicating strong emission bands.

  20. Modeling Cu Migration in CdTe Solar Cells Under Device-Processing and Long-Term Stability Conditions (Poster)

    Energy Technology Data Exchange (ETDEWEB)

    Teeter, G.; Asher, S.

    2008-05-01

    An impurity migration model for systems with material interfaces is applied to Cu migration in CdTe solar cells. In the model, diffusion fluxes are calculated from the Cu chemical potential gradient. Inputs to the model include Cu diffusivities, solubilities, and segregation enthalpies in CdTe, CdS and contact materials. The model yields transient and equilibrium Cu distributions in CdTe devices during device processing and under field-deployed conditions. Preliminary results for Cu migration in CdTe PV devices using available diffusivity and solubility data from the literature show that Cu segregates in the CdS, a phenomenon that is commonly observed in devices after back-contact processing and/or stress conditions.

  1. Modeling Cu Migration in CdTe Solar Cells Under Device-Processing and Long-Term Stability Conditions: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Teeter, G.; Asher, S.

    2008-05-01

    An impurity migration model for systems with material interfaces is applied to Cu migration in CdTe solar cells. In the model, diffusion fluxes are calculated from the Cu chemical potential gradient. Inputs to the model include Cu diffusivities, solubilities, and segregation enthalpies in CdTe, CdS and contact materials. The model yields transient and equilibrium Cu distributions in CdTe devices during device processing and under field-deployed conditions. Preliminary results for Cu migration in CdTe photovoltaic devices using available diffusivity and solubility data from the literature show that Cu segregates in the CdS, a phenomenon that is commonly observed in devices after back-contact processing and/or stress conditions.

  2. The energetic impact of small Cd{sub x}Te{sub y} clusters on Cadmium Telluride

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Miao, E-mail: M.Yu2@lboro.ac.uk; Kenny, Steven D., E-mail: S.D.Kenny@lboro.ac.uk

    2015-06-01

    Cadmium Telluride (CdTe) is an excellent material for low-cost, high efficiency thin film solar cells. It is important to do research on how these defects are formed during the growth process, since defects lower the efficiency of solar cells. In this work we use computer simulation to predict the growth of a sputter deposited CdTe thin film. Single deposition tests have been performed, to study the behaviour of deposited clusters under different conditions. We deposit a Cd{sub x}Te{sub y} (x,y = 0,1) cluster onto the (100) and (111) Cd and Te terminated surfaces with energies ranging from 1 to 40 eV. More than 1000 simulations have been performed for each of these cases so as to sample the possible deposition positions and to collect sufficient statistics. The results show that Cd atoms are more readily sputtered from the surface than Te atoms and the sticking probability is higher on Te terminated surfaces than Cd terminated surfaces. They also show that increasing the deposition energy typically leads to an increase in the number of atoms sputtered from the system and tends to decrease the number of atoms that sit on or in the surface layer, whilst increasing the number of interstitials observed. - Highlights: • Deposition of Cd, Te and CdTe particles on (100) and (111) Cd and Te surfaces • Cd atoms are more readily sputtered from the surface than Te atoms. • The Te terminated surfaces have a higher sticking probability than the Cd ones. • Higher impact energies imply more sputtered atoms from the surface.

  3. Fabrication of CdS/CdTe solar cells with transparent p-type conductive BaCuSeF back contact

    Science.gov (United States)

    Yamamoto, Koichi; Sakakima, Hiroshi; Ogawa, Yohei; Hosono, Aikyo; Okamoto, Tamotsu; Wada, Takahiro

    2015-08-01

    BaCuSeF films were applied to CdS/CdTe solar cells as back electrodes. The interfaces between the CdTe and BaCuSeF layers in the CdS/CdTe solar cells with BaCuSeF back contact deposited at substrate temperatures (TS) of 200 and 300 °C were analyzed by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). We clearly observed many dislocations in the CdTe layer in the CdS/CdTe solar cell with the BaCuSeF layer deposited at TS = 300 °C. We also observed a reaction layer of Cu2.72Te2 between the BaCuSeF and CdTe layers in both solar cells. We concluded that (1) the substrate temperature for the pulsed laser deposition of the BaCuSeF layer and (2) the interface between the CdTe and BaCuSeF layers are important factors for the performance of the CdTe solar cells. We obtained high conversion efficiency of 8.31% for a solar cell with a BaCuSeF layer deposited at TS = 200 °C on a CdTe surface etched in a NH3 aqueous solution. The highest conversion efficiency of 9.91% was obtained for a solar cell with a CdTe surface etched in a bromide-bromate solution.

  4. Cadmium uptake and translocation in tumbleweed (Salsola kali), a potential Cd-hyperaccumulator desert plant species: ICP/OES and XAS studies.

    Science.gov (United States)

    de la Rosa, Guadalupe; Peralta-Videa, Jose R; Montes, Milka; Parsons, Jason G; Cano-Aguilera, Irene; Gardea-Torresdey, Jorge L

    2004-06-01

    Cadmium is a heavy metal, which, even at low concentrations, can be highly toxic to the growth and development of both plants and animals. Plant species vary extensively in their tolerance to excess cadmium in a growth medium and very few cadmium-tolerant species have been identified. In this study, tumbleweed plants (Salsola kali) grown in an agar-based medium with 20 mgl(-1) of Cd(II) did not show phytotoxicity, and their roots had the most biomass (4.5 mg) (P < 0.05) compared to the control plants (2.7 mg) as well as other treated plants. These plants accumulated 2696, 2075, and 2016 mg Cd kg(-1) of dry roots, stems, and leaves, respectively. The results suggest that there is no restricted cadmium movement in tumbleweed plants. In addition, the amount of Cd found in the dry leaf tissue suggests that tumbleweed could be considered as potential cadmium hyperaccumulating species. X-ray absorption spectroscopy studies demonstrated that in roots, cadmium was bound to oxygen while in stems and leaves, the metal was attached to oxygen and sulfur groups. This might imply that some small organic acids are responsible for Cd transport from roots to stems and leaves. In addition, it might be possible that the plant synthesizes phytochelatins in the stems, later coordinating the absorbed cadmium for transport and storage in cell structures. Thus, it is possible that in the leaves, Cd either exists as a Cd-phytochelatin complex or bound to cell wall structures. Current studies are being performed in order to elucidate the proposed hypothesis.

  5. Study of Cu-related Defect States in Single-crystal CdTe

    Science.gov (United States)

    Corwine, Caroline; Sites, James; Gessert, Timothy; Metzger, Wyatt; Dippo, Pat; Duda, Anna

    2003-10-01

    We have studied single-crystal CdTe using low-temperature photoluminescence (PL) in an effort to understand the effects of copper on the deep levels, as well as the effect of a bromine methanol (BrMe) etch on subsequent copper diffusion into CdTe. In present polycrystalline CdS/CdTe solar cell technology, the use of a back contact that contains Cu is necessary to produce high-efficiency cells. However, it is not generally understood why Cu is necessary for these devices to function well. In order to obtain further advances in the efficiencies of these solar cells, it is important to know how the back contact process may affect the defect states in CdTe. PL is one tool used to study defect states. However, before PL can be used effectively for polycrystalline CdTe solar cells, relevant spectral features first must be interpreted for single-crystal CdTe. All PL in this study was taken at 4.5 K. We report on PL peaks at 1.40 and 1.45 eV, which are seen only after Cu is diffused into single-crystal CdTe.

  6. Cadmium biosorption by free and immobilised microorganisms cultivated in a liquid soil extract medium: effects of Cd, pH and techniques of culture.

    Science.gov (United States)

    Lebeau, T; Bagot, D; Jézéquel, K; Fabre, B

    2002-05-27

    Instead of soil clean-up, a process not very technically and economically suited to agricultural soil contaminated by heavy metals (with a low concentration of heavy metals but highly or potentially highly contaminated surfaces), the control of the transfer of cadmium from the soil to the crops may well be a convenient method. We tested the bacterium ZAN-044, the actinomycete R27 and a basidiomycete Fomitopsis pinicola isolated for their ability to biosorb Cd, in order to inoculate agricultural soils afterwards. We then compared the cadmium biosorption by viable microbial cells which were free or immobilised in alginate beads and incubated in a soil extract liquid medium at various pH values (5, 6 and 7) and cadmium concentrations (1 and 10 mg/l). The Cd concentration in the medium had the most important effect on the percentage of Cd biosorbed by the microorganisms, but the culture mode (free or immobilised cells) was not a side effect. In the case of F. pinicola and the actinomycete R27, the percentage of Cd biosorbed by free cells did not decrease when the Cd concentration in the medium increased (6-42% at the lowest Cd concentration to 11-48% at 10 mg Cd/l). On the other hand, with a low Cd concentration (1 mg Cd/l), the percentage of Cd biosorbed by the bacterium ZAN-044 was maximum (69%) at pH 7, while this bacterium did not grow at 10 mg Cd/l and it did not accumulate Cd. For the three micro-organisms tested, relatively low specific biosorptions of Cd were observed, when the microorganisms were cultivated with a soil extract medium ('poor' medium), comparatively to those with a 'rich' medium. Finally, the choice of microorganism for the inoculation of contaminated soils depends on the cadmium level in the medium and on the distribution of the metal between the biomass and the medium.

  7. Prosopis juliflora--a green solution to decontaminate heavy metal (Cu and Cd) contaminated soils.

    Science.gov (United States)

    Senthilkumar, P; Prince, W S P M; Sivakumar, S; Subbhuraam, C V

    2005-09-01

    Soil and plant samples (root and shoot) of Prosopis juliflora were collected in the vicinity of metal based foundry units in Coimbatore and assessed for their heavy metal content (Cu and Cd) to ascertain the use of P. juliflora as a green solution to decontaminate soils contaminated with Cu and Cd. The results showed that Cu and Cd content was much higher in plant components compared to their extractable level in the soil. Furthermore, there exist a strong correlation between the distance of the sources of industrial units and accumulation of heavy metals in plants. Accumulation of Cd in roots is comparatively higher than that of shoots. However, in case of Cu no such clear trend is seen. Considering the accumulation efficiency and tolerance of P. juliflora to Cd and Cu, this plant can be explored further for the decontamination of metal polluted soils. On the other hand, in view of heavy metal accumulate the practice of providing foliage and pods as fodder for live stock should be avoided.

  8. EPR of Cu(II) in sarcosine cadmium chloride: probe into dopant site - symmetry and copper-sarcosine interaction

    CERN Document Server

    Pathinettam-Padiyan, D; Murugesan, R

    2000-01-01

    The electron paramagnetic resonance spectra of Cu(II) doped sarcosine cadmium chloride single crystals have been investigated at room temperature. Experimental results reveal that the Cu(II) ion enters the lattice interstitially. The observed superhyperfine lines indicate the superposition of two sets of quintet structure with interaction of nitrogen atoms and the two isotopes of copper. The spin Hamiltonian parameters are evaluated by Schonland method and the electric field symmetry around the copper ion is rhombic. An admixture of d sub z sup 2 orbital with the d sub x sub sup 2 sub - sub y sub sup 2 ground state is observed. Evaluation of MO coefficients reveals that the in-plane interaction between copper and nitrogen is strong in this lattice.

  9. Evaluation of Toxic Effects and Bioaccumulation of Cadmium and Copper in Spring Barley (Hordeum vulgare L.

    Directory of Open Access Journals (Sweden)

    Jūratė Žaltauskaitė

    2013-07-01

    Full Text Available This paper deals with the analysis of toxic effects of cadmium and copper on the growth of spring barley (Hordeum vulgare L. cultivated in hydroponics. The seedlings of barley were treated with four different concentrations of cadmium and copper, ranging from 0.1 to 10 mg L-1. The aim of the study was to assess toxic effects of cadmium (Cd and copper (Cu on the growth of spring barley, and to determine metal accumulation in above-ground and underground parts of the plant. The impact of Cu and Cd on photosynthetic pigments (chlorophyll a, b, the content of malondialdehyde (MDA, and the essential micronutrients (Mn, Fe were examined. Metal treatment reduced the growth of roots (by 60%, shoots (Cd – 48 %, Cu – 57% and dry weight (Cd – 47 %, Cu – 52% of barley. Exposure to metals altered the content of photosynthetic pigments and caused lipid peroxidation. Regression analysis revealed that there was significant negative relationship between MDA content and biomass of barley treated with Cu (r=-0.99, p=0.01. The examined heavy metals were accumulated mainly in the roots and bioconcentration of Cu there was higher than that of Cd, indicating that roots tended to accumulate higher amounts of Cu than Cd. Though translocation of Cd from roots to above-ground tissues was higher, higher levels of Cd were observed in leaves.DOI: http://dx.doi.org/10.5755/j01.erem.64.2.1951

  10. K-edge EXAFS and XANES studies of Cu in CdTe thin-film solar cells

    Science.gov (United States)

    Liu, Xiangxin; Gupta, Akhlesh; Compaan, Alvin D.; Leyarovska, Nadia; Terry, Jeff

    2002-03-01

    Copper has been identified as a very important dopant element in CdTe thin-film solar cells. Cu is a deep acceptor in CdTe and is commonly used to obtain a heavily doped, low resistance back contact to polycrystalline CdTe. Cu also helps to increase the open circuit voltage of the cell. However, Cu is also a fast diffuser in CdTe, especially along grain boundaries, and can accumulate at the CdS/CdTe junction. It is suspected of leading to cell performance degradation in some cases. The present study is designed to help identify the lattice location of the Cu in CdTe. Cu K-edge, x-ray absorption (XAS) measurements were conducted on Cu in thin films of CdTe. Experiments were performed at the MR-CAT beamline at the Advanced Photon Source. The 3 mm CdTe layers were magnetron sputtered onto fused silica substrates. Some films were diffused with Cu from a 200 Å layer of evaporated Cu. XAS spectra were collected in fluorescence geometry with a 13 elements Ge detector. Quantitative fluorescence spectroscopy measurements were also performed. Details of the Cu environment and possible changes with time will be reported.

  11. Cadmium (Cd) Localization in Tissues of Cotton (Gossypium hirsutum L.), and Its Phytoremediation Potential for Cd-Contaminated Soils.

    Science.gov (United States)

    Chen, Zhifan; Zhao, Ye; Fan, Lidong; Xing, Liteng; Yang, Yujie

    2015-12-01

    Phytoremediation using economically valuable, large biomass, non-edible plants is a promising method for metal-contaminated soils. This study investigated cotton's tolerance for Cd and remediation potential through analyzing Cd bioaccumulation and localization in plant organs under different soil Cd levels. Results showed cotton presents good tolerance when soil Cd concentration ≤20.26 mg kg(-1). Cotton had good Cd accumulation ability under low soil Cd levels (soil Cd, while roots and stems were the main compartments of Cd storage. Cd complexation to other organic constituents in root and stem cell sap could be a primary detoxifying strategy. Therefore, cotton is a potential candidate for phytoremediation of Cd-contaminated soils.

  12. Changes in Tissue Metals After Cadmium Intoxication and Intervention With Chlorpromazine in Male Rats 

    Institute of Scientific and Technical Information of China (English)

    YANGXIAO-FANG; WANGSHU-YI; 等

    2000-01-01

    Cadmium(Cd),one of the most dangerous heavy metals,has a very similar ionic radius to calcium(Ca),The interference of cadmium in calcium homeostasis may play an important role in cadmium toxicity.Recent reports indicate that calmodulin(CaM) inhibitors such as trifluoperazine and chlorpromazine(CPZ) could protect rodents against cadmium toxicity,It was also reported that pretreatment of mice with zine(Zn)could reduce the adverse effects induced by cadmium.The aim of this study is to determine whether Cd changes the balance of other essential metals such as Zn and copper(Cu) in rat tissues,and whether CPZ can reverse these changes which are induced by cadmium intoxication.Adult male Sprague-Dawley(SD) rats were injected intraperitoneally(ip) with cadmium chloride(CdCl2)(0.2,0.4,0.8mg Cd/kg body wight) alone and 0.4mg Cd/kg in association with CPZ(5mg/kg) daily for a week.The control animals were injected with normal saline only.The results showed that the cadmium content in the liver,kidney,and testis increased significantly with a dose-response relationship.Cadmium treatment markedly increased the Zn and Ca content in some of the tissues,Hepatic and renal metallothionein(MT) increased significantly after cadmium intoxication,CPZ treatment,howerver,reduced cadmium content in liver,but not blood and kidney.CPZ seemed to decrease the content of MT in liver and significantly increase the amounts of MT in kidney.These data suggest that the intervention of cadmium with tissue essential metals may play a role in cadium toxicity in rats,and calmodulin inhibitors to some extent can reduce the adverse effect of cadmium by decreasing the cadmium load in tissues and reversing the unbalance of essetial metals.

  13. Copper changes the yield and cadmium/zinc accumulation and cellular distribution in the cadmium/zinc hyperaccumulator Sedum plumbizincicola.

    Science.gov (United States)

    Li, Zhu; Wu, Longhua; Hu, Pengjie; Luo, Yongming; Christie, Peter

    2013-10-15

    Non-accumulated metals in mixed metal contaminated soils may affect hyperaccumulator growth and metal accumulation and thus remediation efficiency. Two hydroponics experiments were conducted to investigate the effects of copper (Cu) on cadmium (Cd) and zinc (Zn) accumulation by the Cd/Zn hyperaccumulator Sedum plumbizincicola, Cu toxicity and plant detoxification using chemical sequential extraction of metals, sub-cellular separation, micro synchrotron radiation based X-ray fluorescence, and transmission electron microscopy. Compared with the control (0.31 μM Cu), 5-50 μM Cu had no significant effect on Cd/Zn accumulation, but Cu at 200 μM induced root cell plasmolysis and disordered chloroplast structure. The plants held Cu in the roots and cell walls and complexed Cu in insoluble forms as their main detoxification mechanisms. Exposure to 200 μM Cu for 4 days inhibited plant Cd uptake and translocation but did not affect Zn concentrations in roots and stems. Moreover, unloading of Cd and Zn from stem to leaf was restrained compared to control plants, perhaps due to Cu accumulation in leaf veins. Copper may thus interfere with root Cd uptake and restrain Cd/Zn unloading to the leaves. Further investigation of how Cu affects plant metal uptake may help elucidate the Cd/Zn hyper-accumulating mechanisms of S. plumbizincicola. Copyright © 2013 Elsevier B.V. All rights reserved.

  14. Investigations on the osmoregulation of freshwater fish (Oreochromis niloticus) following exposures to metals (Cd, Cu) in differing hardness.

    Science.gov (United States)

    Saglam, Dilek; Atli, Gülüzar; Canli, Mustafa

    2013-06-01

    Hardness is one of the most important factors in water chemistry as it affects fish physiology and metal toxicity. The aim of this study was to investigate osmoregulatory responses in the Nile tilapia Oreochromis niloticus exposed to copper and cadmium (1.0μg/mL) in soft water (SW) (hardness 80mg CaCO3/L and conductivity 1.77mS/cm) and hard water (HW) (hardness 320mg CaCO3/L and conductivity 5.80mS/cm) for 0, 1, 7 and 14 days. Following the exposures, Na(+)/K(+)-ATPase activity, ion and Cu levels in the gill, kidney and intestine were measured. There was no fish mortality within 14 days, except Cu exposure in SW which killed all fish between 8 and 12 days. Generally, Na(+)/K(+)-ATPase activity was altered by both metal exposures in the gill and kidney as it increased in HW condition, but decreased in SW condition. There were also alterations in Na(+)/K(+)-ATPase activity in the intestine as its activity generally decreased. Data, in general, showed that Cd was more effective on Na(+)/K(+)-ATPase activity comparing to Cu. However, ion levels altered mainly in the kidney and intestine. Tissue metal accumulation was higher in fish tissues from SW condition comparing to HW condition. Data represented here showed that the effects of metals differed in differing water hardness. This suggests that special attention should be paid to the water chemistry when natural monitoring studies are carried out. This study also suggests that the response of osmoregulation system of fish may be a sensitive indicator under stressful conditions in different natural waters.

  15. Transcriptomic changes during maize roots development responsive to Cadmium (Cd) pollution using comparative RNAseq-based approach.

    Science.gov (United States)

    Peng, Hua; He, Xiujing; Gao, Jian; Ma, Haixia; Zhang, Zhiming; Shen, Yaou; Pan, Guangtang; Lin, Haijian

    2015-09-04

    The heavy metal cadmium (Cd), acts as a widespread environmental contaminant, which has shown to adversely affect human health, food safety and ecosystem safety in recent years. However, research on how plant respond to various kinds of heavy metal stress is scarcely reported, especially for understanding of complex molecular regulatory mechanisms and elucidating the gene networks of plant respond to Cd stress. Here, transcriptomic changes during Mo17 and B73 seedlings development responsive to Cd pollution were investigated and comparative RNAseq-based approach in both genotypes were performed. 115 differential expression genes (DEGs) with significant alteration in expression were found co-modulated in both genotypes during the maize seedling development; of those, most of DGEs were found comprised of stress and defense responses proteins, transporters, as well as transcription factors, such as thaumatin-like protein, ZmOPR2 and ZmOPR5. More interestingly, genotype-specific transcriptional factors changes induced by Cd stress were found contributed to the regulatory mechanism of Cd sensitivity in both different genotypes. Moreover, 12 co-expression modules associated with specific biological processes or pathways (M1 to M12) were identified by consensus co-expression network. These results will expand our understanding of complex molecular mechanism of response and defense to Cd exposure in maize seedling roots. Copyright © 2015 Elsevier Inc. All rights reserved.

  16. Cumulation of Cu, Zn, Cd, and Mn in Plants of Gardno Lake

    Directory of Open Access Journals (Sweden)

    Trojanowski J.

    2013-04-01

    Full Text Available In the present paper there have been shown the results of research on yhe content of Zn, Cd, Cu, Mn and Pb in chosen plants of Lake Gardno.The biggest concentration of those metals has been observed in Potamogton natans and Elodea canadensis, on average Zn – 34.9, Pb -2.77, Cd – 0.62, Cu – 3.24 and Mn – 257.4 μg g-1. It has been found that the over-ground parts of the plants under analysis cumulate several times less of heavy metals than their roots. The determined enrichment factors enabled the researchers to state that Cu in the examined plants is of natural origin while Mn, Cd and Zn – of anthropogenic origin.

  17. Role of polycrystallinity in CdTe and CuInSe sub 2 photovoltaic cells

    Energy Technology Data Exchange (ETDEWEB)

    Sites, J.R. (Colorado State Univ., Fort Collins, CO (United States))

    1991-01-01

    The polycrystalline nature of thin-film CdTe and CuInSe{sub 2} solar cells continues to be a major factor in several individual losses that limit overall cell efficiency. This report describes progress in the quantitative separation of these losses, including both measurement and analysis procedures. It also applies these techniques to several individual cells to help document the overall progress with CdTe and CuInSe{sub 2} cells. Notably, CdTe cells from Photon Energy have reduced window photocurrent losses to 1 mA/Cm{sup 2}; those from the University of South Florida have achieved a maximum power voltage of 693 mV; and CuInSe{sub 2} cells from International Solar Electric Technology have shown a hole density as high as 7 {times} 10{sup 16} cm{sup {minus}3}, implying a significant reduction in compensation. 9 refs.

  18. Copper changes the yield and cadmium/zinc accumulation and cellular distribution in the cadmium/zinc hyperaccumulator Sedum plumbizincicola

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zhu [Key Laboratory of Soil Environment and Pollution Remediation, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); University of the Chinese Academy of Sciences, Beijing 100049 (China); Wu, Longhua, E-mail: lhwu@issas.ac.cn [Key Laboratory of Soil Environment and Pollution Remediation, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); Hu, Pengjie [Key Laboratory of Soil Environment and Pollution Remediation, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); Luo, Yongming [Key Laboratory of Soil Environment and Pollution Remediation, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); Yantai Institute of Coastal Zone Research, Yantai 264003 (China); Christie, Peter [Agri-Environment Branch, Agri-Food and Biosciences Institute, Newforge Lane, Belfast BT9 5PX (United Kingdom)

    2013-10-15

    Highlights: • Low Cu has no significant effect on Sedum plumbizincicola plant growth and Cd and Zn uptake. • Plant held Cu in unactive areas and insoluble forms as de-toxification mechanisms. • Influence of Cu on Zn and Cd uptake and translocation were different. • Cu accumulation in leaf veins may restrain Cd/Zn unloading to the leaves -- Abstract: Non-accumulated metals in mixed metal contaminated soils may affect hyperaccumulator growth and metal accumulation and thus remediation efficiency. Two hydroponics experiments were conducted to investigate the effects of copper (Cu) on cadmium (Cd) and zinc (Zn) accumulation by the Cd/Zn hyperaccumulator Sedum plumbizincicola, Cu toxicity and plant detoxification using chemical sequential extraction of metals, sub-cellular separation, micro synchrotron radiation based X-ray fluorescence, and transmission electron microscopy. Compared with the control (0.31 μM Cu), 5–50 μM Cu had no significant effect on Cd/Zn accumulation, but Cu at 200 μM induced root cell plasmolysis and disordered chloroplast structure. The plants held Cu in the roots and cell walls and complexed Cu in insoluble forms as their main detoxification mechanisms. Exposure to 200 μM Cu for 4 days inhibited plant Cd uptake and translocation but did not affect Zn concentrations in roots and stems. Moreover, unloading of Cd and Zn from stem to leaf was restrained compared to control plants, perhaps due to Cu accumulation in leaf veins. Copper may thus interfere with root Cd uptake and restrain Cd/Zn unloading to the leaves. Further investigation of how Cu affects plant metal uptake may help elucidate the Cd/Zn hyper-accumulating mechanisms of S. plumbizincicola.

  19. Gamma Irradiation Synthesis and Influence the Optical and Thermal Properties of Cadmium Sulfide (CdS/Poly (Vinyl Pyrolidone Nanocomposites

    Directory of Open Access Journals (Sweden)

    Shawkat S. Gasaymeh

    2010-01-01

    Full Text Available Problem statement: Gamma irradiation has been successfully used to prepare a spherical cadmium sulfide CdS/Poly Vinylpyrolidone (PVP quantum dots nanoparticles with enhancement of their optical band gap energy and thermal properties at room temperature and under ambient pressure. Sodium thiosulfate was used as a sulfur source in an aqueous solution. The formation of lower band gap energy of CdS/PVP nanoparticles and thermal stability can be controlled by using different irradiation doses. TEM images showed that the CdS/PVP particle size tends to be smaller and with better distribution as irradiation dose increases. Approach: Gamma (γ irradiation offered many advantages for the preparation of metal nanoparticles by producing large number of hydrated electrons during γ-ray irradiation, which can reduce the metal ions to zero valiant metal particles. Results: CdS/PVP nanoparticles were successfully prepared in one-step by γ-irradiation technique in an aqueous system at room temperature and under ambient pressure. The particle size was found to be less than 10 nm based on the Transmission Electron Microscopy (TEM that depended on the irradiation doses value, which showed a well distribution with a controlled size as doses change. The presence of PVP polymer was considered an important reason that influenced the shape and the distribution of those nanoparticles. The optical band gap energy of those nanoparticles was calculated by using the UV-VIS absorption spectra. Thermal analysis TGA showed that the composite had a higher degradation temperature than the PVP alone. A possible mechanism of the formation of cadmium sulfide by irradiation system was proposed. Conclusion: This result indicated that CdSO4 can effectively dope PVP and enhance the optical and thermal properties. In addition, γ-irradiation is an effective technique for preparing inorganic/organic nanocomposites.

  20. Biosorption behaviors of Cu2+,Zn2+, Cd2+ and mixture by waste activated sludge

    Institute of Scientific and Technical Information of China (English)

    LUO Sheng-lian; YUAN Lin; CHAI Li-yuan; MIN Xiao-bo; WANG Yun-yan; FANG Yan; WANG Pu

    2006-01-01

    Biosorption of heavy metal ions, such as Cu2+, Cd2+ and Zn2+, was carried out using waste activated sludge from municipal sewage treatment plant as adsorption material, and the effects of parameters, such as pH value, temperature, reaction time and sorption duration, were studied in detail. The results indicate that the removal rates of Cu2+, Zn2+ and Cd2+ with low concentration are 96.47%, 80% and 90%, respectively, adsorbed by waste activated sludge. Little effect of dosage of activated sludge on the adsorption of Cu2+ and more effects on the adsorption of Zn2+ and Cd2+ are observed. Little effect oftemperature is observed, while pH value and adsorption time exert important influence on the sorption process. The adsorption behaviors of heavy metal ions all have parabolic relationships with pH value. The optimum pH value is between 6 and 10, and the optimum adsorption time is 1 h. In single heavy metal ion system, the sorption processes of Cu2+, Zn2+ and Cd2+ are in accordance with Freundlich model, which indicates that it is suitable for the treatment of these three heavy metal ions using intermittent operation. In addition, the sorption capacity of the sludge for Cu2+ is preferential to the other two ions.

  1. HEAVY METALS (Ni, Cu, Zn AND Cd CONTENT IN SERUM OF RAT FED GREEN MUSSELS

    Directory of Open Access Journals (Sweden)

    Muhammad Yudhistira Azis

    2015-11-01

    Full Text Available Green mussel (Perna viridis can playing role as bio-indicator or biomonitoring agent for heavy-metalcontaminations in the sea. In this research, the concentrations of four elements Ni, Cu, Zn and Cd in P. viridis and in the serum of rat which orally feed by P. viridis were determined by Atomic Absorption Spectrometry (AAS following dry acid digestion. Parameter analysis was evaluated by determining confidence limit for the obtained results. The result showed that there was a sequence of heavy-metal content in green mussels sample and laboratory rats serum, such as Ni < Cd < Cu < Zn. Keywords: heavy metals, green mussels, laboratory rats serum, AAS

  2. 基于GSH-CdTe/CdS量子点的荧光变化研究hsDNA与盐酸洛美沙星-Cu(Ⅱ)配合物的相互作用%Interaction of Herring Sperm DNA with Lomefloxacin Hydrochloride-Cu(Ⅱ) Based on Changes in the Fluorescence Intensity of GSH-CdTe/CdS Quantum Dots

    Institute of Scientific and Technical Information of China (English)

    沈益忠; 刘绍璞; 殷鹏飞; 何佑秋

    2013-01-01

    Glutathione (GSH)-capped CdTe/CdS quantum dots(GSH-CdTe/CdS QDs) were synthesized in aqueous solution.The particle sizes and morphological characteristics of GSH-CdTe/CdS QDs were investigated by transmission electron microscopy(TEM).The results exhibits that the particle size of as-prepared QDs has a narrow size distribution and good dispersivity.In Tris-HCl buffer medium (pH =7.6),lomefloxacin hydrochloride-Cu (Ⅱ) coordination compound(LMFH-Cu2+) was adsorbed to the surfaces of GSH-CdTe/CdS QDs through electrostatic attraction and formed ground state complex,which resulted in the quenching of the fluorescence of GSH-CdTe/CdS QDs.Adding herring sperm DNA (hsDNA) to GSH-CdTe/CdS QDs-LMFH-Cu(Ⅱ) system led to the fluorescence intensity of GSH-CdTe/CdS QDs recover,which can be explained by that the addition of hsDNA to the system induced LMFH-Cu(Ⅱ) to dissociate from the surface of GSH-CdTe/CdS QDs and embed into its double helix structure.According to the fluorescence quenching and restoration for GSH-CdTe/CdS QDs,fluorescence reversible control of GSH-CdTe/CdS QDs was realized.Compared with the interaction between GSH-CdTe/CdS QDs and LMFH,the interaction of GSH-CdTe/CdS QDs-LMFH-Cu (Ⅱ)-hsDNA was studied by fluorescence (FL),resonance Rayleigh scattering(RRS) and ultraviolet-visible absorption (UV-Vis) spectra.Meanwhile,the interaction mechanism was discussed and corresponding model of interaction was built.%采用水相法合成了谷胱甘肽(GSH)修饰的CdTe/CdS量子点(GSH-CdTe/CdS QDs).透射电子显微镜表征结果表明,GSH-CdTe/CdS QDs的粒径分布均匀,分散性好.在Tris-HCl(pH=7.6)缓冲液中,由于静电引力作用,带正电的盐酸洛美沙星(LMFH)-Cu(Ⅱ)配合物[LMFH-Cu(Ⅱ)]吸附到带负电的GSH-CdTe/CdSQDs表面形成基态复合物,导致GSH-CdTe/CdS QDs的荧光猝灭.随后,向GSH-CdTe/CdS QDs-LMFH-Ca(Ⅱ)配合物体系中加入鲱鱼精DNA(hsDNA),hsDNA可诱导LMFH-Cu(Ⅱ)配合物从GSH-CdTe/CdS QDs表面脱落而嵌

  3. Characterization of cadmium biosorption by Exiguobacterium sp. isolated from farmland soil near Cu-Pb-Zn mine.

    Science.gov (United States)

    Park, Jin Hee; Chon, Hyo-Taek

    2016-06-01

    Bacteria have the ability to bind heavy metals on their cell wall. Biosorption is a passive and energy-independent mechanism to adsorb heavy metals. The efficiency of heavy metal biosorption can vary depending on several factors such as the growth phase of bacteria, solution pH, and existence of competitive heavy metals. In this study, Exiguobacterium sp. isolated from farmland soil near a mine site were used, and optimal conditions for Cd biosorption in solution were investigated. As bacterial growth progressed, Cd biosorption increased, which is attributed to changes in the structure and composition of the cell wall during bacterial growth. The biosorption process was rapid and was completed within 30 min. Cadmium biosorption was highest at pH 7 due to the dissociation of hydrogen ions and the increase of negative charges with increasing pH. In the mixed metal solution of Cd, Pb, and Zn, the amount of biosorption was in the order of Pb>Cd>Zn while in a single metal solution, the order was Cd≥Pb>Zn. The maximum adsorption capacity for Cd by the isolated bacteria was 15.6 mg/g biomass, which was calculated from the Langmuir isotherm model. Different adsorption efficiencies under various environmental conditions indicate that, to control metal mobility, the conditions for biosorption should be optimized before applying bacteria. The results showed that the isolated bacteria can be used to immobilize metals in metal-contaminated wastewater.

  4. Transcriptomic changes during maize roots development responsive to Cadmium (Cd) pollution using comparative RNAseq-based approach

    Energy Technology Data Exchange (ETDEWEB)

    Peng, Hua [Key Laboratory of Biology and Genetic Improvement of Maize in Southwest Region, Ministry of Agriculture, Maize Research Institute, Sichuan Agricultural University, Wenjiang, Sichuan, 611130 (China); Sichuan Tourism College, Chengdu, 610000, Sichuan (China); He, Xiujing [Key Laboratory of Biology and Genetic Improvement of Maize in Southwest Region, Ministry of Agriculture, Maize Research Institute, Sichuan Agricultural University, Wenjiang, Sichuan, 611130 (China); Gao, Jian [Institute of Pathology and Southwest Cancer Center, Southwest Hospital, Third Military Medical University, Key Laboratory of Tumor Immunopathology, Ministry of Education of China, Chongqing (China); Ma, Haixia; Zhang, Zhiming; Shen, Yaou [Key Laboratory of Biology and Genetic Improvement of Maize in Southwest Region, Ministry of Agriculture, Maize Research Institute, Sichuan Agricultural University, Wenjiang, Sichuan, 611130 (China); Pan, Guangtang, E-mail: pangt@sicau.edu.cn [Key Laboratory of Biology and Genetic Improvement of Maize in Southwest Region, Ministry of Agriculture, Maize Research Institute, Sichuan Agricultural University, Wenjiang, Sichuan, 611130 (China); Lin, Haijian, E-mail: linhj521@gmail.com [Key Laboratory of Biology and Genetic Improvement of Maize in Southwest Region, Ministry of Agriculture, Maize Research Institute, Sichuan Agricultural University, Wenjiang, Sichuan, 611130 (China)

    2015-09-04

    The heavy metal cadmium (Cd), acts as a widespread environmental contaminant, which has shown to adversely affect human health, food safety and ecosystem safety in recent years. However, research on how plant respond to various kinds of heavy metal stress is scarcely reported, especially for understanding of complex molecular regulatory mechanisms and elucidating the gene networks of plant respond to Cd stress. Here, transcriptomic changes during Mo17 and B73 seedlings development responsive to Cd pollution were investigated and comparative RNAseq-based approach in both genotypes were performed. 115 differential expression genes (DEGs) with significant alteration in expression were found co-modulated in both genotypes during the maize seedling development; of those, most of DGEs were found comprised of stress and defense responses proteins, transporters, as well as transcription factors, such as thaumatin-like protein, ZmOPR2 and ZmOPR5. More interestingly, genotype-specific transcriptional factors changes induced by Cd stress were found contributed to the regulatory mechanism of Cd sensitivity in both different genotypes. Moreover, 12 co-expression modules associated with specific biological processes or pathways (M1 to M12) were identified by consensus co-expression network. These results will expand our understanding of complex molecular mechanism of response and defense to Cd exposure in maize seedling roots. - Highlights: • Transcriptomic changes responsive to Cd pollution using comparative RNAseq-based approach. • 115 differential expression genes (DEGs) were found co-modulated in both genotypes. • Most of DGEs belong to stress and defense responses proteins, transporters, transcription factors. • 12 co-expression modules associated with specific biological processes or pathways. • Genotype-specific transcriptional factors changes induced by Cd stress were found.

  5. Bioaccessibility of As, Cd, Cu, Ni, Pb, and Sb in toys and low-cost jewelry.

    Science.gov (United States)

    Guney, Mert; Zagury, Gerald J

    2014-01-21

    Children can be exposed to toxic elements in toys and jewelry following ingestion. As, Cd, Cu, Ni, Pb, and Sb bioavailability was assessed (n = 24) via the in vitro gastrointestinal protocol (IVG), the physiologically based extraction test (PBET), and the European Toy Safety Standard protocol (EN 71-3), and health risks were characterized. Cd, Cu, Ni, and Pb were mobilized from 19 metallic toys and jewelry (MJ) and one crayon set. Bioaccessible Cd, Ni, or Pb exceeded EU migratable concentration limits in four to six MJ, depending on the protocol. Using two-phase (gastric + intestinal) IVG or PBET might be preferable over EN 71-3 since they better represent gastrointestinal physiology. Bioaccessible and total metal concentrations were different and not always correlated, indicating that bioaccessibility measurement may provide more accurate risk characterization. More information on impacts of multiple factors affecting metals mobilization from toys and jewelry is needed before recommending specific tests. Hazard index (HI) for Cd, Ni, or Pb were >1 for all six MJ exceeding the EU limits. For infants (6-12 mo old), 10 MJ had HI > 1 for Cd, Cu, Ni, or Pb (up to 75 for Cd and 43 for Pb). Research on prolonged exposure to MJ and comprehensive risk characterization for toys and jewelry exposure is recommended.

  6. Effects of Different Doping Ratio of Cu Doped CdS on QDSCs Performance

    Directory of Open Access Journals (Sweden)

    Xiaojun Zhu

    2015-01-01

    Full Text Available We use the successive ionic layer adsorption and reaction (SILAR method for the preparation of quantum dot sensitized solar cells, to improve the performance of solar cells by doping quantum dots. We tested the UV-Vis absorption spectrum of undoped CdS QDSCs and Cu doped CdS QDSCs with different doping ratios. The doping ratios of copper were 1 : 100, 1 : 500, and 1 : 1000, respectively. The experimental results show that, under the same SILAR cycle number, Cu doped CdS quantum dot sensitized solar cells have higher open circuit voltage, short circuit current density photoelectric conversion efficiency than undoped CdS quantum dots sensitized solar cells. Refinement of Cu doping ratio are 1 : 10, 1 : 100, 1 : 200, 1 : 500, and 1 : 1000. When the proportion of Cu and CdS is 1 : 10, all the parameters of the QDSCs reach the minimum value, and, with the decrease of the proportion, the short circuit current density, open circuit voltage, and the photoelectric conversion efficiency are all increased. When proportion is 1 : 500, all parameters reach the maximum values. While with further reduction of the doping ratio of Cu, the parameters of QDSCs have a decline tendency. The results showed that, in a certain range, the lower the doping ratio of Cu, the better the performance of quantum dot sensitized solar cell.

  7. CdS nanowires decorated with Cu{sub 2}O nanospheres: Synthesis, formation process and enhanced photoactivity and stability

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yang; Dong, Hailiang; Jia, Husheng; Xu, Bingshe; Yu, Chunyan; Zhang, Zhuxia, E-mail: zhangzhuxia@tyut.edu.cn

    2015-09-25

    Highlights: • Novel CdS/Cu{sub 2}O heterostructural composites were synthesized by a two-step chemical method. • A formation process of CdS/Cu{sub 2}O heterostructural composites. • The CdS/Cu{sub 2}O heterostructural composites were found to have superior photocatalytic performance and stability. - Abstract: CdS/Cu{sub 2}O heterostructural materials were successfully synthesized by a solvent-thermal process followed by a chemical bath deposition process. Structures and morphologies of the obtained CdS/Cu{sub 2}O composites were characterized by XRD, SEM, and TEM; the experimental results indicate that the surface of CdS nanowires (NWs) is decorated with spherical Cu{sub 2}O whose diameter ranges from 100 to 200 nm. Through crystal shape-evolution, the formation process of these hierarchical nanostructures was rationally proposed. Briefly, in the chemical bath deposition process, Cu(OH){sub 2} colloids generate firstly, and then the colloids transform into nanobelts after adding ascorbic acid (AA). With the reaction time further increasing, nanobelts aggregate together to form the hierarchical nanospheres on the surface of CdS NWs. The photoactivity of CdS/Cu{sub 2}O composite for methyl orange (MO) photodegradation was investigated in detail. The obtained high photocatalytic efficiency can be attributed to the heterojunction structure, which results in the efficient separation of photo-generated electrons and holes.

  8. [Phytoavailability and chemical speciation of cadmium in different Cd-contaminated soils with crop root return].

    Science.gov (United States)

    Zhang, Jing; Yu, Ling-Ling; Xin, Shu-Zhen; Su, De-Chun

    2013-02-01

    Pot experiments were conducted under greenhouse condition to investigate the effects of crop root return on succeeding crops growth, Cd uptake and soil Cd speciation in Cd-contaminated soil and artificial Cd-contaminated soil. The results showed that the amount of root residue returned to soil by corn and kidney bean growth successive for 3 times was 0.4%-1.1%. The Cd returned to soil by root residue was 1.3%-3.5% to the total soil Cd. There was no significant difference in the shoot dry weights of winter wheat and Chinese cabbage grown on the 2 Cd-contaminated soils with and without root return. While Cd concentration of Chinese cabbage increased significantly in the Cd-contaminated soil with corn or kidney bean root return. Light fraction of soil organic matter increased with root return in both of the Cd-contaminated soils. The percentage of Cd in the light fraction of soil organic matter increased with root return in the artificial Cd-contaminated soil. Soil carbonates-bound Cd concentration decreased significantly with corn root return in the Cd-contaminated soil. Soil exchangeable Cd concentration decreased and soil Fe-Mn oxide-bound Cd concentration increased significantly with kidney bean root return in the artificial Cd-contaminated soil.

  9. Valve movement response of the mussel mytilus galloprovincialis to metals (Cu, Hg, Cd and Zn) and phosphate industry effluents from Moroccan Atlantic coast.

    Science.gov (United States)

    Fdil, Mohamed Ait; Mouabad, Abdelfattah; Outzourhit, Abdelkader; Benhra, Ali; Maarouf, Abdelmalek; Pihan, Jean Claude

    2006-07-01

    Valve activity was measured in the Mediterranean mussel Mytilus galloprovincialis in response to sublethal concentrations of four metals (Hg, Cu, Zn and Cd) and two phosphate industry effluents from the Atlantic coast of Morocco. Valve movements were monitored using a proximity inductive sensor which could display all activity figures from full closure to wide opening of the shell valves. In a 1 h exposure experiments, all metals induced a decrease in the time of normal opening and the appearance of sequences of stress behaviour, including enhanced valve adductions and complete closure at high concentrations. Mercury (tested from 5 to 75 microg Hg l(-1)) was the most toxic to the valve activity, with a threshold effective concentration at 10 microg Hg l(-1) and full valve closure occurring at 50 microg Hg l(-1). Copper (15-150 microg Cu l(-1)) showed a toxic effect starting at threshold concentration of 20 microg Cu l(-1) and induced full valve closure at 150 microg Cu l(-1). Zinc (100-500 microg Zn l(-1)) was effective in reducing the time of normal opening (threshold concentration at 100 microg Zn I(-1)) but no complete closure was recorded in any of the tested concentrations. For cadmium (1000-5000 microg Cd l(-1)), the valve activity was insensitive for exposures under 2000 microg Cd l(-1). Results for the testing of several samplings of the phosphate industry effluents (Safi and Jorf Lasfar) showed that their toxicity varied over the time. The effluent of the Jorf Lasfar plant (2-9.4%) was, however, more toxic than that of Safi (1-25%). In the light of these results, the sensitivity of the valve activity of Mytilus galloprovincialis to pollutants and its usefulness for in situ monitoring of coastal pollution in Morocco are discussed.

  10. Ectomycorrhizal Fungus-Induced Changes of Cu and Cd speciation in the rhizosphere of Chinese Pine Seedlings

    Institute of Scientific and Technical Information of China (English)

    HUANG Yi; LI Ting; HUANG Zhi-Ji; FEI Ying-Heng

    2008-01-01

    To understand the role of ectomycorrhizas in improving the tolerance of its host to excessive heavy metals in soil, this study was conducted to exam the patterns of four fractions (the exchangeable, the carbonate-bound, the Fe-Mn oxide-bound and the organically bound) of both Cu and Cd in the rhizosphere of Chinese pine (Pinus tabulaeformis) seedlings grown in excessive Cu and Cd environment. The results showed that the speciation of Cu and Cd in the rhizosphere was significantly influenced by inoculation of ectomycorrhizal fungus Boletus edulis. Compared to the rhizosphere, the content of exchangeable Cu slightly decreased in the mycorrhizosphere of the seedlings grown in 166 and 400 mg kg-1Cu contaminated soil, whereas the exchangeable Cd in the mycorrhizosphere decreased remarkably to only 33% and to 60% that of the rhizosphcre at 0.75 and 1.50 mg kg-1 Cd levels, respectively. These indicate the potential capacity of mycorrhizas to alleviate the damage of heavy metals to the host plants by reducing the bioavailability of heavy metals in soil. Distribution of the 4 tested fractions of Cu and Cd at different contamination levels showed that there was a strong tendency of changing from loosely associatcd fractions to strongly associated fractions in the mycorrhizosphere. The most stable Cd fraction, organically bound Cd, was significantly larger in the mycorrhizosphere than in the rhizosphere at different Cd contamination levels. This phenomenon was also observed for Cu but the difference was not statistically significant.

  11. Photoluminescence study of CdTe/CdS solar cells grown from a source with Cu residual impurity

    Science.gov (United States)

    Ghimpu, L.; Ursaki, V. V.; Potlog, T.; Tiginyanu, I. M.

    2005-11-01

    Three photoluminescence (PL) bands centred at 1.30, 1.35 and 1.45 eV have been observed in the PL spectrum of CdTe/CdS thin film solar cells grown by close space sublimation (CSS) techniques from a source with Cu residual impurity. The bands at 1.30 and 1.45 eV were found to be independent of the technological conditions of the CSS process, while the intensity of the band at 1.35 eV proved to increase with the increase of the source temperature and the decrease of the substrate temperature. This PL band is suggested to correspond to donor-CuCd defects related to the incorporation in the CdTe film of the impurity from the source. The other two bands are associated with defects whose formation does not depend upon the technological processes applied, the band at 1.45 eV being attributed to a VCd-ClTe defect.

  12. Surface photovoltage analyses of Cu(In,Ga)S2/CdS and Cu(In,Ga)S2/In2S3 photovoltaic junctions

    Science.gov (United States)

    Merdes, S.; Osterloh, F.; Sáez-Araoz, R.; Klaer, J.; Klenk, R.; Dittrich, T.

    2013-05-01

    Spectrally dependent surface photovoltage measurements were performed with repetitive regime on Cu(In,Ga)S2 absorbers and on Cu(In,Ga)S2/CdS and Cu(In,Ga)S2/In2S3 junctions. The results are correlated to current-voltage investigations of the respective completed solar cells. The measurements show the presence of a space charge region in the bare Cu(In,Ga)S2 absorbers due to a high density of surface states. It is found that deposition of CdS increases the band bending whereas deposition of In2S3 does not change it.

  13. Contents of metals Pb, Cd, Zn and Cu in Agricultural Soils of Zagreb and Its Surroundings

    Directory of Open Access Journals (Sweden)

    Marija Romić

    1998-09-01

    The highest average cadmium content of 0.93 mg/kg Cd per designated regions was recorded in the youngest river valley along the Sava. Anomalous values were also encountered in the youngest valley along the Sava watercourse, where the average zinc content amounted to 87.08 mg/kg Zn, which are classified as highly contaminated soils. Higher copper values were determined in the hilly area of Mt. Medvednica and Pleistocene of sloping terrains, which seems to be related to the manner of land use (vineyards, gardens at private holdings.

  14. Room temperature synthesis and spectral characterization of Cu2+-doped CdO powder

    Science.gov (United States)

    Venkata Reddy, Ch.; Shim, J.; Byon, C.; Krishna Rao, L. V.; Satish, D. V.; Ravikumar, R. V. S. S. N.

    2016-03-01

    In the present study, we have synthesized undoped and Cu2+-doped CdO nanopowders by a mild solution method at room temperature. Powder X-ray diffraction, optical absorption, electron paramagnetic resonance and Fourier transform infrared measurements are used to characterize prepared powders. The powder X-ray diffraction patterns reflect the cubic crystal structure for undoped and Cu2+-doped CdO powders. Surface morphology images and compositional features are studied by scanning electron microscopy and energy-dispersive X-ray techniques, respectively. The optical absorption spectra exhibit a single absorption band for Cu2+-doped sample, which is the characteristic absorption band of distorted octahedral site symmetry. By correlating the electron paramagnetic resonance and optical results for Cu2+-doped CdO nanopowder, bonding parameters are evaluated. These values indicate the partial covalency of in-plane σ ( α 2) and in-plane π bonding ( β12 ) between copper ions and their ligands. The FT-IR spectra indicate the fundamental vibrations of Cd-O.

  15. Assessing the Levels of Pb, Cd, Zn and Cu in Biscuits and Home ...

    African Journals Online (AJOL)

    ADOWIE PERE

    The mean levels of Zn, Cu, Pb and Cd found in plantain chips obtained from the University ... the upper limits of the range specified by the World Health Organization, the consumption of .... 0.52 mg/kg) in potato chips sampled from the second.

  16. Electrodialytic removal of Cu, Zn, Pb, and Cd from harbor sediment: Influence of changing experimental conditions

    DEFF Research Database (Denmark)

    Nystrøm, Gunvor Marie; Ottosen, Lisbeth M.; Villumsen, Arne

    2005-01-01

    Electrodialytic remediation (EDR) was used to remove Cu, Zn, Pb, and Cd from contaminated harbor sediment. Extraction experiments were made prior to EDR, and the metal desorption was pH dependent but not liquid-to-solid ratio (L/S) dependent. The desorption order was Cd $GRT Zn $GRT Pb $GRT Cu...... for the removal of Cu, Zn, and Pb, probably due to oxidation of the sediments during stirring. Contrary, Cd removal was lower in the wet sediment as compared to the air-dried. The heavy metal removal was influenced by higher current strengths and varying L/S ratios. The highest removal obtained...... was in an experiment with dry sediment (L/S 8) and a 70 mA applied current that lasted 14 days. These experimental conditions were thereafter used to remediate more strongly contaminated sediments. Regardless of the initial heavy metal concentrations in the sediments, 67-87% Cu, 79-98% Cd, 90-97% Zn, and 91-96% Pb...

  17. KHELASI PLUMBUM (Pb DAN CADMIUM (Cd MENGGUNAKAN ASAM SITRAT PADA BIJI KEDELA (Chelation of Plumbum and Cadmium by Citric acid in Soybean Seeds

    Directory of Open Access Journals (Sweden)

    Sapto Priyadi

    2014-02-01

    Full Text Available A study on the chelation of plumbum and cadmium by citric acid in soybean seeds, it was aimed to identify the effect of chelation treatment (chelating ratio, time contact and seeds condition on plumbum reduction and cadmium in soybean seeds. A factors of research covering 1st chelating ratio (citric acid/”C” consisting of three (1, 2 and 3 grams of citric acid; 2nd the time contact (“D” consisting of three (90, 120 and 180 minutes and the 3rd factors is condition of the seeds (“E” consisting of three standard (whole qualify e.i. passing sieve of 0.3 inch and restrained at 0.2 inch, ruptured e.i. restrained for sieve at 10 mesh, and flour qualify for pass for sieves 50 mesh. The result showed that the combination of three factors were able to reduce Cd maximaly (non detected/detect limit 0.01 ppm. Reduction Pb maximaly (non detected /detect limit 0.09 ppm occured in treatment C1D1E1, C1D1E2, C1D2E1, C1D2E2, C1D2E2, C2D1E1, C2D1E2, C2D2E1, C2D3E1, C2D3E2, C3D1E1 and C3D2E1. A combination of citric acid chelation (C with the time contact (D showing significant difference and both showed interactions, the reduction of the highest was C1D1 treatment. A combination of citric acid chelation (C with the condition of the nut (E showed significant difference and both no interaction, the reduction of the highest was C2E1 treatment. The combination between the time of contact (D with the condition of the seed (E showed significant difference and both no interaction, the reduction of the highest were D1E1 and D2E1 treatments. Keywords: chelation, plumbum, cadmium and soybean   ABSTRAK Telah dilakukan penelitian tentang khelasi plumbum (pb dan cadmium (cd menggunakan asam sitrat pada biji kedelai, dengan tujuan untuk mengetahui pengaruh faktor perlakuan khelasi (ratio pengkhelat, waktu kontak dan kondisi biji dalam mereduksi Pb dan Cd pada biji kedelai. Faktor penelitian meliputi 1 rasio pengkhelat (asam sitrat/C yang terdiri dari tiga taraf (1

  18. The formation of different phases of Cu {sub x}Te and their effects on CdTe/CdS solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, J. [National Renewable Energy Laboratory (NREL), Golden, CO 80401 (United States)]. E-mail: Jie_Zhou@nrel.gov; Wu, X. [National Renewable Energy Laboratory (NREL), Golden, CO 80401 (United States); Duda, A. [National Renewable Energy Laboratory (NREL), Golden, CO 80401 (United States); Teeter, G. [National Renewable Energy Laboratory (NREL), Golden, CO 80401 (United States); Demtsu, S.H. [Department of Physics, Colorado State University, Fort Collins, CO 80523 (United States)

    2007-06-25

    Material studies and device applications of Cu {sub x}Te in an NREL-developed CdTe solar cell structured as glass/Cd{sub 2}SnO{sub 4}/ZnSnO {sub x}/CdS/CdTe are presented. The Cu {sub x}Te primary back contact was formed by evaporating a Cu layer with various thicknesses at room temperature on HNO{sub 3}/H{sub 3}PO{sub 4} (NP) solution etched CdTe layer. A post-annealing was then followed. The structural evolution and electrical properties of Cu {sub x}Te were investigated. Cu/Te ratio and post-annealing temperature are two processing parameters in this study. The Cu {sub x}Te phases are mainly controlled by the Cu/Te ratio. After a post-annealing at a low temperature, such as 100 deg. C, no Cu {sub x}Te phase transformation from its as-deposited phase was observed. A post-annealing treatment at a higher temperature, such as 250 deg. C, can reveal the stoichiometric Cu {sub x}Te phases based on the Cu/Te ratio used in the devices. But a post-annealing at a further higher temperature, such as 400 deg. C, resulted in a complicated Cu {sub x}Te phase appearance. CuTe, Cu{sub 1.4}Te, and Cu{sub 2}Te are three major phases detected by X-ray diffraction (XRD) for different Cu thickness application annealed at 250 deg. C. Application of Cu thicker than 60 nm degrades open-circuit voltage (V {sub oc}) and shunting resistance (R {sub sh}), but increases series resistance (R {sub s}). The correlation between device performance and the Cu {sub x}Te back contact illustrates that the process used for forming the Cu{sub 2}Te back contact failed to produce good fill factor (FF) and also introduced higher barrier height. The best device was observed for a back contact with a mixed Cu{sub 1.4}Te and CuTe phases.

  19. Chemical reactions at CdS heterojunctions with CuInSe{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Aquino, Angel; Rockett, Angus [Department of Materials Science and Engineering, University of Illinois, 1304 West Green Street, Urbana, Illinois 61801 (United States)

    2013-03-15

    The stability of the CdS/CuInSe{sub 2} (CIS) heterojunction is critical to understanding the projected lifetime of CIS devices and the effect of processing conditions on the nanoscale chemistry of the heterojunction. This article reports the results of annealing heterojunctions between CdS deposited by chemical bath deposition and single crystal and polycrystalline CIS films between 200 and 500 Degree-Sign C for 10 to 150 min. No atomic movement was observed by secondary ion mass spectrometry at temperatures of 300 Degree-Sign C and below. At 400 Degree-Sign C even for the shortest time studied, Cu and In were found throughout the region initially consisting of CdS only and Cd was found to have moved into the CIS. In the polycrystal, annealing at 500 Degree-Sign C resulted in movement of Cd throughout the CIS layer. No time dependence was observed in the 400 and 500 Degree-Sign C anneals indicating that a reaction had occurred forming a compound that was in thermodynamic equilibrium with the remaining CIS. Diffusion turns on rapidly between 300 and 400 Degree-Sign C, indicating a high activation energy for atomic movement ({approx}2.4 eV). The onset of diffusion is consistent with the onset of Cu diffusion in CIS.

  20. Synchrotron-radiation photoemission study of CdS/CuInSe sub 2 heterojunction formation

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, A.J.; Gebhard, S. (Solar Energy Research Institute, 1617 Cole Boulevard, Golden, CO (USA)); Rockett, A. (Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL (USA)); Colavita, E. (Department of Physics, University of Calabria, I-87036 Arcavacata di Rende, Cosenza (Italy)); Engelhardt, M.; Hoechst, H. (Synchrotron Radiation Center, University of Wisconsin-Madison, Stoughton, WI (USA))

    1990-10-15

    Synchrotron-radiation soft-x-ray photoemission spectroscopy was used to investigate the development of the electronic structure at the CdS/CuInSe{sub 2} heterojunction interface. CdS overlayers were deposited in steps on single-crystal {ital p}- and {ital n}-type CuInSe{sub 2} at 250 {degree}C. Results indicate that the CdS grows in registry with the substrate, initially in a two-dimensional growth mode followed by three-dimensional island growth as is corroborated by reflection high-energy electron-diffraction analysis. Photoemission measurements were acquired after each growth in order to observe changes in the valence-band electronic structure as well as changes in the In 4{ital d}, Se 3{ital d}, Cd 4{ital d}, and S 2{ital p} core lines. The results were used to correlate the interface chemistry with the electronic structure at these interfaces and to directly determine the CdS/CuInSe{sub 2} heterojunction valence-band discontinuity and the consequent heterojunction band diagram. These results show that the Katnani-Margaritondo method is unreliable in determining offsets for heterojunctions where significant Fermi-level pinning may occur and where the local structure and chemistry of the interface depends strongly on the specific heterojunction.

  1. Simultaneous determination of Cd(II) and Cu(II) using stripping voltammetry in groundwater, soil and Alhagi maurorum plants in industrial and urban areas in Northern Border, Saudi Arabia with luminol as a chelating agent.

    Science.gov (United States)

    Al-Hossainy, Ahmed Farouk

    2015-01-01

    The cathodic stripping voltammetry of Cu(II) and Cd(II) speciation was re-optimized by using luminol (Lu) in groundwater, soil and Alhagi maurorum plants, finding differences with the pre-existing method and a different interpretation for the electroactive species. The main findings are that optimum sensitivity is obtained at 0.3-142.5 ng/mL and 0.065-60.0 ng/mL for copper and cadmium, respectively, that the complexes responsible for adsorption on the electrode are CuLu and CdLu, and that the sensitivity of the method is much improved in the absence of dissolved oxygen. The limit of detection of the method was 0.011 ± 0.001 ng/mL for Cu(II) and 0.013 ± 0.001 ng/mL for Cd(II). The interference of some common ions: Cr(III), Fe(III), Zn(II), Ni(II), Co(II) and Mo(II) was studied. It was concluded that application of this method for the determination of Cu(II) and Cd(II) in groundwater, soil and Alhagi maurorum plants led to satisfactory results.

  2. Investigation of bandgap modulation, field emission and dielectric properties of cadmium doped CaCu3 Ti4O12

    Science.gov (United States)

    Maitra, S.; Mitra, R.; Bera, K. P.; Nath, T. K.

    2017-05-01

    We have prepared cadmium doped CCTO (Ca1-xCdxCu3Ti4O12 where x = 0.01, 0.02, 0.03, 0.04, 0.05) by Molten Salt Synthesis technique. It has exhibited high level of crystallinity and a well defined micrometre sized grains with uniform cubic morphology, as confirmed by a combination of X-ray diffraction and field emission scanning electron microscopy. Thereby we have found the modulation of its semiconducting bandgap as a function of doping from recorded UV-Vis reflectance spectra using Kubelka Munk (KM) method where with increasing Cadmium doping content the bandgap is found to increase. We have also carried out investigation on the field emission properties of CCTO crystals and it has exhibited poor field emission characteristics. Finally, we have investigated the dielectric properties of CCTO as a function of temperature. It has exhibited a giant dielectric property with low loss over a considerable temperature regime (50-300°C) and is found to exhibit Maxwell Wagner type dielectric relaxation.

  3. Enhanced photocurrent ZnO/CdS/CuInSe/sub 2/ solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Potter, R.R.

    1986-02-01

    The short-wavelength spectral response of a thin film CuInSe/sub 2/ device is improved by a thin (less than 500 A) undoped CdS layer and a 1 micron ZnO conducting window layer. The ZnO acts as an antireflection coating and permits photons of wavelength above 360 nm to be absorbed in the CuInSe/sub 2/. A 25-percent photocurrent enhancement is measured for comparable devices. Total area efficiencies over 9 percent are achieved under AM 1.5 illumination. Current-voltage, capacitance-voltage, and spectral response data are discussed. The data indicate that device properties are similar to devices with (In)CdS window layers. A reverse bias breakdown with long time constants is observed. Deep states in the thin CdS layer may be responsible.

  4. Enhanced photocurrent ZnO/CdS/CuInSe/sub 2/ solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Potter, R.R.

    1986-01-15

    The short-wavelength spectral response of a thin film CuInSe/sub 2/ device is improved by a thin (<500 A) undoped CdS layer and a 1 ..mu..m ZnO conducting window layer. The ZnO acts as an antireflection coating and permits photons of wavelength above 360 nm to be absorbed in the CuInSe/sub 2/. A 25% photocurrent enhancement is measured for comparable devices. Total area efficiencies over 9% are achieved under AM 1.5 illumination. Current-voltage, capacitance-voltage and spectral response data are discussed and indicate that device properties are similar to devices with (In) CdS window layers. A reverse bias breakdown with long time constants is observed. Deep states in the thin CdS layer may be responsible.

  5. DSC, ESR and optical absorption studies of Cu{sup 2+} ion doped in boro cadmium tellurite glasses

    Energy Technology Data Exchange (ETDEWEB)

    Gayathri Pavani, P., E-mail: gayathri.potturi@gmail.com [Glassy Material Research Laboratory, Department of Physics, Osmania University, Hyderabad 500 007 (India); Prasad, M.; Chandra Mouli, V. [Glassy Material Research Laboratory, Department of Physics, Osmania University, Hyderabad 500 007 (India)

    2012-06-25

    Highlights: Black-Right-Pointing-Pointer Variation in different physical parameters of the glass system is studied. Black-Right-Pointing-Pointer Variation in glass transition temperature is discussed in terms of different structural parameters. Black-Right-Pointing-Pointer ESR analysis and the bonding parameters determination of the present glass system is interesting. - Abstract: Physical, optical absorption, ESR and DSC studies on 50 B{sub 2}O{sub 3}-(50 - x) CdO-xTeO{sub 2} glasses containing Cu{sup 2+} spin probe have been carried out. Density measurement is carried out by Archimedes principle. Variation in glass transition temperature is discussed in terms of physical parameters. ESR results show that g{sub Parallel-To} > g{sub Up-Tack} indicating that the Cu{sup 2+} ions is in tetragonal distorted octahedral site and its ground state is d{sub x{sub 2-y{sub 2}}}. There are considerable changes in g{sub Parallel-To }, g{sub Up-Tack} and A{sub Parallel-To} values with increasing the concentration of CdO in BCT glass systems. The optical absorption spectra results show that the absorption peak of Cu{sup 2+} is a function of composition. The observed optical absorption peak of Cu{sup 2+} has been found to be minimum at 776 nm for x = 30 mol.% of CdO content. The variations in the physical, optical and bonding parameters clearly indicate the structural changes in the present glass system with varied CdO content.

  6. Concentrations of Mn, Fe, Cu, Zn, Cr, Cd, Pb, Ni in selected Nigerian tubers, legumes and cereals and estimates of the adult daily intakes.

    Science.gov (United States)

    Akinyele, I O; Shokunbi, O S

    2015-04-15

    This study was designed to determine the levels of microminerals (manganese (Mn), iron (Fe), copper (Cu), zinc (Zn), chromium (Cr)) and heavy metals (cadmium (Cd), lead (Pb) and nickel (Ni)) in some tubers, legumes and cereals obtained from the markets in Abeokuta city, South-West Nigeria. The food samples were digested by dry ashing procedure and their minerals were determined by atomic absorption spectrophotometer. The results show mean values of 1.67-32.00, 7.25-61.58, 1.59-10.56, 6.65-46.99, 0.02-0.58, legumes and cereals from various parts of the world. The daily intakes of the metals through tubers, legumes and cereals were found to be lower than the provisional tolerable daily intakes proposed by Joint FAO/WHO Expert Committee on Food Additives.

  7. Cadmium sulfide nanowires for the window semiconductor layer in thin film CdS-CdTe solar cells.

    Science.gov (United States)

    Liu, Piao; Singh, Vijay P; Jarro, Carlos A; Rajaputra, Suresh

    2011-04-08

    Thin film CdS/CdTe heterojunction device is a leading technology for the solar cells of the next generation. We report on two novel device configurations for these cells where the traditional CdS window layer is replaced by nanowires (NW) of CdS, embedded in an aluminum oxide matrix or free-standing. An estimated 26.8% improvement in power conversion efficiency over the traditional device structure is expected, primarily because of the enhanced spectral transmission of sunlight through the NW-CdS layer and a reduction in the junction area/optical area ratio. In initial experiments, nanostructured devices of the two designs were fabricated and a power conversion efficiency value of 6.5% was achieved.

  8. Normal and superconducting properties in the Ca 1-xCd xLaBaCu 3O y system

    Science.gov (United States)

    Zhang, X.-J.; Wang, J.-S.; Xu, Z.-A.; Jiao, Z.-K.; Zhang, Q. R.

    1994-11-01

    The superconducting behavior of the superconductor CaLaBaCu 3O y (CLBCO) has been studied as a function of substitution of Cd for Ca. Electrical resistivity measurements show that the superconducting critical temperature ( Tc) decreases monotonously with increasing substituent Cd concentration x. Within the composition range O⩽ x⩽1, the samples remain in single phase. Thermogravimetry (TG) studies of the samples show that the oxygen content greatly influences the normal and superconducting properties of the Ca 1- xCd xLaBaCu 3O y system. The substitution of Cd for Ca leads to deficiencies of oxygen in Cu-O chain. As the substituent Cd concentration x increases, the oxygen content decreases monotonously. It is concluded that the reason why Cd leads to the suppression of Tc is the reduction of oxygen content caused by substitution of Cd for Ca.

  9. Cadmium(Cd)-induced oxidative stress down-regulates the gene expression of DNA mismatch recognition proteins MutS homolog 2 (MSH2) and MSH6 in zebrafish (Danio rerio) embryos

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, Todd, E-mail: toddhsu@mail.ntou.edu.tw [Institute of Bioscience and Biotechnology and Center of Excellence for Marine Bioenvironment and Biotechnology, National Taiwan Ocean University, Keelung 20224, Taiwan (China); Huang, Kuan-Ming; Tsai, Huei-Ting; Sung, Shih-Tsung; Ho, Tsung-Nan [Institute of Bioscience and Biotechnology and Center of Excellence for Marine Bioenvironment and Biotechnology, National Taiwan Ocean University, Keelung 20224, Taiwan (China)

    2013-01-15

    DNA mismatch repair (MMR) of simple base mismatches and small insertion-deletion loops in eukaryotes is initiated by the binding of the MutS homolog 2 (MSH2)-MSH6 heterodimer to mismatched DNA. Cadmium (Cd) is a genotoxic heavy metal that has been recognized as a human carcinogen. Oxidant stress and inhibition of DNA repair have been proposed as major factors underlying Cd genotoxicity. Our previous studies indicated the ability of Cd to disturb the gene expression of MSH6 in zebrafish (Danio rerio) embryos. This study was undertaken to explore if Cd-induced oxidative stress down-regulated MSH gene activities. Following the exposure of zebrafish embryos at 1 h post fertilization (hpf) to sublethal concentrations of Cd at 3-5 {mu}M for 4 or 9 h, a parallel down-regulation of MSH2, MSH6 and Cu/Zn superoxide dismutase (Cu/Zn-SOD) gene expression was detected by real-time RT-PCR and the expression levels were 40-50% of control after a 9-h exposure. Cd exposure also induced oxidative stress, yet no inhibition of catalase gene activity was observed. Whole mount in situ hybridization revealed a wide distribution of msh6 mRNA in the head regions of 10 hpf embryos and pretreatment of embryos with antioxidants butylhydroxytoluene (BHT), D-mannitol or N-acetylcysteine (NAC) at 1-10 {mu}M restored Cd-suppressed msh6 expression. QPCR confirmed the protective effects of antioxidants on Cd-suppressed msh2/msh6 mRNA production. Down-regulated MSH gene activities reaching about 50% of control were also induced in embryos exposed to paraquat, a reactive oxygen species (ROS)-generating herbicide, or hydrogen peroxide at 200 {mu}M. Hence, Cd at sublethal levels down-regulates msh2/msh6 expression primarily via ROS as signaling molecules. The transcriptional activation of human msh6 is known to be fully dependent on the specificity factor 1 (Sp1). Cd failed to inhibit the DNA binding activity of zebrafish Sp1 unless at lethal concentrations based on band shift assay, therefore

  10. Geospatial Mapping of Pb, Cr, Cu, Zn, Cd, and Sb in Urban Soil, Cd. Juarez, Chihuahua, Mexico

    Science.gov (United States)

    Amaya, M. A.; Grimida, S. E.; Elkekli, A. R.; Aldouri, R. K.; Benedict, B. A.; Pingitore, N. E., Jr.

    2015-12-01

    Population-based random stratified sampling of the city of Cd. Juarez, Chihuahua, Mexico provided 500 city blocks for study. We collected soil from the public space (where present) in front of each house on a selected block; equal measured small volumes of these were combined to produce a composite sample for analysis. Such composite samples (1) decrease, by an order of magnitude, laboratory processing and analysis costs, and (2) smooth the data to represent blocks as averages of individual houses. Retention of the unanalyzed samples of the individual houses permits their later analysis should the composites suggest further study of individual houses on an anomalous block. Elemental analysis of 10 mg pressed powders was performed on a Panalytical Epsilon5 EDS-XRF, via 8 secondary targets and 12 USGS and NIST multi-element rock standards. The mean and (range) of concentration for Pb was 43 (13-550) ppm; for Cr, 31 (1.8-76); for Cu, 22 (6-550); for Zn 84 (42-415) ppm; for Cd, 1.9 (0.1-6.2); and for Sb, 5.9 (2.7-29). The old urban core of Cd. Juarez was marked by high levels of Pb, Cr, Cu, and Zn, and, to a smaller degree, of Cd and Sb. This pattern mirrors that of contiguous El Paso, Texas, USA, directly across the narrow Rio Grande. Businesses, industrial facilities, transportation (both railroads and highways), traditional "downtown" shopping, and old residential districts cluster in this urban core. A Pb-Cu-Zn smelter, which operated for more than a century until 1999, is present in the US adjacent to the Rio Grande, about two km away from downtown Cd. Juarez. Thus the city has been subject to both traditional metal sources (e.g., leaded gasoline, highway debris) and smelter emissions. The poplation of Cd. Juarez has exploded in the last few decades to some 1.5 million inhabitants due both to natural growth and in-migration from rural districts for economic opportunity. Most of this growth has been accommodated by radial expansion of the city into the surrounding

  11. Zn/Cd ratios and cadmium isotope evidence for the classification of lead-zinc deposits.

    Science.gov (United States)

    Wen, Hanjie; Zhu, Chuanwei; Zhang, Yuxu; Cloquet, Christophe; Fan, Haifeng; Fu, Shaohong

    2016-04-28

    Lead-zinc deposits are often difficult to classify because clear criteria are lacking. In recent years, new tools, such as Cd and Zn isotopes, have been used to better understand the ore-formation processes and to classify Pb-Zn deposits. Herein, we investigate Cd concentrations, Cd isotope systematics and Zn/Cd ratios in sphalerite from nine Pb-Zn deposits divided into high-temperature systems (e.g., porphyry), low-temperature systems (e.g., Mississippi Valley type [MVT]) and exhalative systems (e.g., sedimentary exhalative [SEDEX]). Our results showed little evidence of fractionation in the high-temperature systems. In the low-temperature systems, Cd concentrations were the highest, but were also highly variable, a result consistent with the higher fractionation of Cd at low temperatures. The δ(114/110)Cd values in low-temperature systems were enriched in heavier isotopes (mean of 0.32 ± 0.31‰). Exhalative systems had the lowest Cd concentrations, with a mean δ(114/110)Cd value of 0.12 ± 0.50‰. We thus conclude that different ore-formation systems result in different characteristic Cd concentrations and fraction levels and that low-temperature processes lead to the most significant fractionation of Cd. Therefore, Cd distribution and isotopic studies can support better understanding of the geochemistry of ore-formation processes and the classification of Pb-Zn deposits.

  12. Compositional and electrical analysis of the multilayers of a CdS/CuInSe/sub 2/ solar cell

    Energy Technology Data Exchange (ETDEWEB)

    Noufi, R.; Dick, J.

    1985-11-15

    The compositional profiles and the electrical properties of the bilayers of CdS and CuInSe/sub 2/ films in CdS/CuInSe/sub 2/ solar cells are presented and compared with those of the individual layers alone. The CuInSe/sub 2/ bilayer shows that the two individual layers have mixed, except for the last-to-deposit 0.2--0.4 ..mu..m, which is semi-insulating and copper poor. This bilayer remains p type and highly resistive during the cell processing steps. The CdS bilayer consists of an almost stoichiometric layer close to the junction and a top In-doped low-resistivity layer. The CdS/CuInSe/sub 2/ may possibly operate as a P-S-N device, where the S layer is defined largely by a semi-insulating CuInSe/sub 2/ layer.

  13. Responses of different Chinese flowering cabbage (brassica parachinensis l.) cultivars to cadmium and lead exposure: screening for Cd + Pb pollution-safe cultivars

    Energy Technology Data Exchange (ETDEWEB)

    Qiu, Qiu; Yang, Zhongyi; Xin, Junliang; Yuan, Jiangang; Wang, Jianbing; Xin, Guorong [State Key Laboratory of Biocontrol, School of Life Sciences, Sun Yat-Sen University, Guangzhou (China); Wang, Yutao [Key Laboratory of Ecology and Environmental Science in Guangdong Higher Education, School of Life Sciences, South China Normal University, Guangzhou, Guangdong (China)

    2011-11-15

    To reduce the potential risks of cadmium (Cd) and lead (Pb) entering the human food chain in vegetables, two pot experiments (Exp. 1 and Exp. 2) were carried out to screen for Cd and Pb pollution-safe cultivars (PSCs) of Chinese flowering cabbage (Brassica parachinensis L.). The three Cd treatments in Exp. 1 (0.114, 0.667, and 1.127 mg kg{sup -1}) showed that Chinese flowering cabbage could easily take up Cd from polluted soils, and there were wide variations in Cd accumulation among different cultivars. The Cd accumulation trait at cultivar level was rather stable under different soil Cd treatments. In Exp. 2, seven cultivars that had been shown in Exp. 1 to be typical high or low accumulators of Cd were selected and six Cd + Pb joint exposure treatments were applied to them. The results showed that there were similar trends of accumulation between Cd and Pb for the tested cultivars, but Pb accumulation by the species was much poorer than that of Cd. It was worth noting that an increase in soil Pb levels significantly (p < 0.01) depressed shoot Cd accumulation. Six cultivars were selected as Cd + Pb PSCs. This study showed that it is feasible to apply a PSC strategy in Chinese flowering cabbage cultivation, to cope with the Cd and Pb contamination commonly found in agricultural soils. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  14. Genotype variations in accumulation of cadmium and lead in celery (Apium graveolens L.) and screening for low Cd and Pb accumulative cultivars

    Institute of Scientific and Technical Information of China (English)

    Kun ZHANG; Jianbing WANG; Zhongyi YANG; Guorong XIN; Jiangang YUAN; Junliang XIN; Charlie HUANG

    2013-01-01

    To help reduce risks of heavy metal pollution, two pot experiments were conducted to investigate the variations, transfer potential, and stability of Cadmium (Cd) and Lead (Pb) accumulations in celery (Apium graveolens L.) and to screen for low Cd and Pb accumulative cultivars. The maximum differences in shoot Cd concentration were 4.7-fold under low-Cd exposure and 3.3-fold under high-Cd exposure. These genotype variations in Cd accumulation are sufficiently large to help reduce Cd contamination risk in soil by using the Low-Cd-Accumulative genotypes. Cd accumulation of the Low-Cd-Accumulative genotypes is significantly positive correlated with Pb accumulation. Evidence obtained proves that Cd and Pb accumulations in celery are stable and genotype-dependent at the cultivar level. The presence of high-Pb contamination in soil promoted Cd accumulation in shoots of celery. Celery is considered a species with high risks in Cd pollution and low risks in Pb pollution. Among the tested cultivars, cv. Shuanggang- kangbing (SGKB) had the lowest shoot Cd and Pb accumulating abilities, and thus is the most important material for breeding of pollution-safe cultivars (PSCs) to minimize Cd and Pb accumulations in celery.

  15. Phytoremediation of Cd, Cr, Cu, Mn, Fe, Ni, Pb and Zn from aqueous solution using Phragmites cummunis, Typha angustifolia and Cyperus esculentus.

    Science.gov (United States)

    Chandra, Ram; Yadav, Sangeeta

    2011-07-01

    A comparative bioaccumulation pattern and ultra structural changes were studied in Phragmites cummunis, Typha angustifolia and Cyperus esculentus in mixed metals solution of cadmium (Cd), chromium (Cr), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), lead (Pb) and zinc (Zn). P. cummunis was observed to be a shoot accumulator for Cr, Fe, Mn, Ni, Pb, and Zn. However, T. angustifolia was found to be a root accumulator for Cd, Cr, Cu, Fe, Ni and Pb. In addition, C. esculentus also accumulated most of the tested heavy metals in the roots, while Mn and Fe were translocated up to leaves. Further, the long term metal treatment showed maximum accumulation of all heavy metals in P. cummunis followed by T. angustifolia and C. esculentus. Among heavy metals, Fe was accumulated maximum, i.e., >1000 microg g(-1) by all three plants. Simultaneously, the adverse effects on biochemical parameters were noted earlier in C. esculentus than T. angustifolia and P. cummunis. Ultra structural observation showed the cellular changes in wetland plants after longer exposure. Results revealed that P. cummunis and T. angustifolia had more potential for tested metals than C. esculentus. This study established that these wetland plants could be used for heavy metals phytoremediation from metal containing industrial wastewater.

  16. Biologically active new Fe(II, Co(II, Ni(II, Cu(II, Zn(II and Cd(II complexes of N-(2-thienylmethylenemethanamine

    Directory of Open Access Journals (Sweden)

    C. SPÎNU

    2008-04-01

    Full Text Available Iron(II, cobalt(II, nickel (II, copper (II, zinc(II and cadmium(II complexes of the type ML2Cl2, where M is a metal and L is the Schiff base N-(2-thienylmethylenemethanamine (TNAM formed by the condensation of 2-thiophenecarboxaldehyde and methylamine, were prepared and characterized by elemental analysis as well as magnetic and spectroscopic measurements. The elemental analyses suggest the stoichiometry to be 1:2 (metal:ligand. Magnetic susceptibility data coupled with electronic, ESR and Mössbauer spectra suggest a distorted octahedral structure for the Fe(II, Co(II and Ni(II complexes, a square-planar geometry for the Cu(II compound and a tetrahedral geometry for the Zn(II and Cd(II complexes. The infrared and NMR spectra of the complexes agree with co-ordination to the central metal atom through nitrogen and sulphur atoms. Conductance measurements suggest the non-electrolytic nature of the complexes, except for the Cu(II, Zn(II and Cd(II complexes, which are 1:2 electrolytes. The Schiff base and its metal chelates were screened for their biological activity against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa and the metal chelates were found to possess better antibacterial activity than that of the uncomplexed Schiff base.

  17. Swift heavy ion irradiation effect on Cu-doped CdS nanocrystals embedded in PMMA

    Indian Academy of Sciences (India)

    Shweta Agrawal; Subodh Srivastava; Sumit Kumar; S S Sharma; B Tripathi; M Singh; Y K Vijay

    2009-12-01

    Semiconductor nanocrystals (NCs) have received much interest for their optical and electronic properties. When these NCs dispersed in polymer matrix, brightness of the light emission is enhanced due to their quantum dot size. The CdCuS NCs have been synthesized by chemical route method and then dispersed in PMMA matrix. These nanocomposite polymer films were irradiated by swift heavy ion (SHI) (100 MeV, Si+7 ions beam) at different fluences of 1 × 1010 and 1 × 1012 ions/cm2 and then compared their structural and optical properties by XRD, atomic force microscopy, photoluminescence, and UV-Vis spectroscopy before and after irradiation. The XRD spectra showed a broad hump around 2 ≈ 11.83° due to amorphous PMMA and other peaks corresponding to hexagonal structure of CdS nanocrystals in PMMA matrix. The photoluminescence spectra shows a broad peak at 530 nm corresponding to green emission due to Cu impurities in CdS. The UV-Vis measurement showed red shift in optical absorption and bandgap changed from 4.38–3.60 eV as the irradiation fluency increased with respect to pristine CdCuS nanocomposite polymer film.

  18. TcOPT3, a member of oligopeptide transporters from the hyperaccumulator Thlaspi caerulescens, is a novel Fe/Zn/Cd/Cu transporter.

    Science.gov (United States)

    Hu, Yi Ting; Ming, Feng; Chen, Wei Wei; Yan, Jing Ying; Xu, Zheng Yu; Li, Gui Xin; Xu, Chun Yan; Yang, Jian Li; Zheng, Shao Jian

    2012-01-01

    Thlaspi caerulescens is a natural selected heavy metal hyperaccumulator that can not only tolerate but also accumulate extremely high levels of heavy metals in the shoots. Thus, to identify the transportors involved in metal long-distance transportation is very important for understanding the mechanism of heavy metal accumulation in this hyperaccumulator. We cloned and characterized a novel gene TcOPT3 of OPT family from T. caerulescens. TcOPT3 was pronouncedly expressed in aerial parts, including stem and leaf. Moreover, in situ hybridization analyses showed that TcOPT3 expressed in the plant vascular systems, especially in the pericycle cells that may be involved in the long-distance transportation. The expression of TcOPT3 was highly induced by iron (Fe) and zinc (Zn) deficiency, especially in the stem and leaf. Sub-cellular localization showed that TcOPT3 was a plasma membrane-localized protein. Furthermore, heterogonous expression of TcOPT3 by mutant yeast (Saccharomyces cerevisiae) complementation experiments demonstrated that TcOPT3 could transport Fe(2+) and Zn(2+). Moreover, expression of TcOPT3 in yeast increased metal (Fe, Zn, Cu and Cd) accumulation and resulted in an increased sensitivity to cadmium (Cd) and copper (Cu). Our data demonstrated that TcOPT3 might encode an Fe/Zn/Cd/Cu influx transporter with broad-substrate. This is the first report showing that TcOPT3 may be involved in metal long-distance transportation and contribute to the heavy metal hyperaccumulation.

  19. TcOPT3, a Member of Oligopeptide Transporters from the Hyperaccumulator Thlaspi caerulescens, Is a Novel Fe/Zn/Cd/Cu Transporter

    Science.gov (United States)

    Hu, Yi Ting; Ming, Feng; Chen, Wei Wei; Yan, Jing Ying; Xu, Zheng Yu; Li, Gui Xin; Xu, Chun Yan; Yang, Jian Li; Zheng, Shao Jian

    2012-01-01

    Background Thlaspi caerulescens is a natural selected heavy metal hyperaccumulator that can not only tolerate but also accumulate extremely high levels of heavy metals in the shoots. Thus, to identify the transportors involved in metal long-distance transportation is very important for understanding the mechanism of heavy metal accumulation in this hyperaccumulator. Methodology/Principal Findings We cloned and characterized a novel gene TcOPT3 of OPT family from T. caerulescens. TcOPT3 was pronouncedly expressed in aerial parts, including stem and leaf. Moreover, in situ hybridization analyses showed that TcOPT3 expressed in the plant vascular systems, especially in the pericycle cells that may be involved in the long-distance transportation. The expression of TcOPT3 was highly induced by iron (Fe) and zinc (Zn) deficiency, especially in the stem and leaf. Sub-cellular localization showed that TcOPT3 was a plasma membrane-localized protein. Furthermore, heterogonous expression of TcOPT3 by mutant yeast (Saccharomyces cerevisiae) complementation experiments demonstrated that TcOPT3 could transport Fe2+ and Zn2+. Moreover, expression of TcOPT3 in yeast increased metal (Fe, Zn, Cu and Cd) accumulation and resulted in an increased sensitivity to cadmium (Cd) and copper (Cu). Conclusions Our data demonstrated that TcOPT3 might encode an Fe/Zn/Cd/Cu influx transporter with broad-substrate. This is the first report showing that TcOPT3 may be involved in metal long-distance transportation and contribute to the heavy metal hyperaccumulation. PMID:22761683

  20. TcOPT3, a member of oligopeptide transporters from the hyperaccumulator Thlaspi caerulescens, is a novel Fe/Zn/Cd/Cu transporter.

    Directory of Open Access Journals (Sweden)

    Yi Ting Hu

    Full Text Available BACKGROUND: Thlaspi caerulescens is a natural selected heavy metal hyperaccumulator that can not only tolerate but also accumulate extremely high levels of heavy metals in the shoots. Thus, to identify the transportors involved in metal long-distance transportation is very important for understanding the mechanism of heavy metal accumulation in this hyperaccumulator. METHODOLOGY/PRINCIPAL FINDINGS: We cloned and characterized a novel gene TcOPT3 of OPT family from T. caerulescens. TcOPT3 was pronouncedly expressed in aerial parts, including stem and leaf. Moreover, in situ hybridization analyses showed that TcOPT3 expressed in the plant vascular systems, especially in the pericycle cells that may be involved in the long-distance transportation. The expression of TcOPT3 was highly induced by iron (Fe and zinc (Zn deficiency, especially in the stem and leaf. Sub-cellular localization showed that TcOPT3 was a plasma membrane-localized protein. Furthermore, heterogonous expression of TcOPT3 by mutant yeast (Saccharomyces cerevisiae complementation experiments demonstrated that TcOPT3 could transport Fe(2+ and Zn(2+. Moreover, expression of TcOPT3 in yeast increased metal (Fe, Zn, Cu and Cd accumulation and resulted in an increased sensitivity to cadmium (Cd and copper (Cu. CONCLUSIONS: Our data demonstrated that TcOPT3 might encode an Fe/Zn/Cd/Cu influx transporter with broad-substrate. This is the first report showing that TcOPT3 may be involved in metal long-distance transportation and contribute to the heavy metal hyperaccumulation.

  1. Changes of Cu, Zn, and Cd speciation in sewage sludge during composting

    Institute of Scientific and Technical Information of China (English)

    GAO Ding; ZHENG Guo-di; CHEN Tong-bin; LUO Wei; GAO Wei; ZHANG Yi-an; LI Yan-xia

    2005-01-01

    The potential toxicity risks from heavy metals depend on their chemical speciation. The four stages of the Tessier sequential extraction method were employed to investigate changes in heavy metal speciation(Cu, Zn, and Cd) of sewage sludge during forced aeration composting, and then to identify whether the composting process would reduce or enhance their toxicities. Throughout the composting process, the exchangeable, carbonate-bound, Fe-Mn oxide-bound, and organic matter-bound fractions of Cu were converted to the residual Cu fraction. The organic matter-bound Cu fraction greatly contributed to this transformation. Residual Zn fraction was transformed to the Fe-Mn oxide-bound and organic matter-bound fractions after composting. The residual Zn fraction was a major contributor to the organic matter-bound Zn fraction. The availability of Cu and Zn was reduced by composting such that the risk of heavy metal toxicity decreased with prolonged treatment times. Additionally, attention should be paid to the increased availability of Cd in sewage sludge after composting treatment.

  2. Polycrystalline semiconductor heterojunction modeling (CdS/CuInSe/sub 2/)

    Energy Technology Data Exchange (ETDEWEB)

    Boeer, K.W.

    1986-01-15

    The solution curves of the complete set of transport, continuity and Poisson equations for the CdS/CuInSe/sub 2/ solar cell are analyzed. They show high saturation currents, however, combined with low open-circuit voltage and fill factors. The losses responsible for the low open-circuit voltage are caused by high junction recombination near V/sub oc/ due to the strong optical absorption close to the junction interface in the direct band gap CuInSe/sub 2/ with little light penetrating towards the back electrode. A consequently stepwise parameter variation identifies the importance of an increase in minority carrier life and acceptor density in the CuInSe/sub 2/ which, when combined, improves V/sub oc/ from 350 to more than 500 mV. A shift of the junction away from the CdS/CuInSe/sub 2/ interface into the CuInSe/sub 2/ shows a reduction in the field at the hetero-interface which results in marked losses in short-circuit currents when the interface recombination velocity exceeds about 10/sup 5/ cm s/sup -1/. The results of the computation demonstrate the sensitivity of the cell design to several factors including doping, recombination center distribution and boundary conditions to interlayers between the active device part and the electrodes.

  3. Effect of Heavy Metals (Cd, Cu) on the Gametophytes of Laminaria japonica Aresch

    Institute of Scientific and Technical Information of China (English)

    Nai-Hao YE; Guang-Ce WANG; Cheng-Kui TSENG

    2005-01-01

    Effects of various concentrations of two heavy metals, namely Cd and Cu, on gametophytes of Laminariajaponica Aresch were determined by recording morphological changes of gametophytes, determining pH values and the heavy metal content of the culture solution, calculating the germination rate of sporophytes, and observing heavy metal (Cd) distribution using a fluorescence microscope. The results showed that heavy metals damaged the gametophytes, and were even lethal, and that the higher the concentration of heavy metal ions, the greater the injury to gametophytes. Gametophytes could not survive in culture solutions containing more than 100 mg/L Cd and 50 mg/L Cu and were only able to survive in culture solution containing a mixture of Cd and Cu up to a concentration of 10 mg/L, which indicates that gametophytes have a higher tolerance to Cd than Cu and that multiple heavy metal ions in solution markedly aggravate the damage to gametophytes compared with individual heavy metal ions. With increases in the concentration of the heavy metal, the burgeoning rate of sporophytes decreased acutely, and solutions containing multiple heavy metal ions caused even more marked harm to sporophytes than solutions containing a single heavy metal ion, because most sporophytes died in mixed solutions. The pH value of the culture medium dropped immediately at the beginning (the first day) of treatment, increased over the following days, and then decreased again. The pH of culture media containing multiple heavy metal ions showed greater variation than media containing a single heavy metal ion, with the extent of the decrease in pH of culture media containing multiple ions being greatest during the last period of the experiment. With increases in the concentration of heavy metals, the capacity of gametophytes to accumulate these ions increased. The blue fluorescent light emitted by the Cd- and Cd-binding protein complex existing in gametophytes in media containing different

  4. Transcriptome sequencing and differential gene expression analysis in Viola yedoensis Makino (Fam. Violaceae) responsive to cadmium (Cd) pollution

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Jian [Key Laboratory of Biology and Genetic Improvement of Maize in Southwest Region, Ministry of Agriculture, Maize Research Institute of Sichuan Agricultural University, Wenjiang, Sichuan (China); Luo, Mao [Drug Discovery Research Center of Luzhou Medical College, Luzhou, Sichuan (China); Zhu, Ye; He, Ying; Wang, Qin [Department of Pharmacy of Luzhou Medical College, Luzhou, Sichuan (China); Zhang, Chun, E-mail: zc83good@126.com [Department of Pharmacy of Luzhou Medical College, Luzhou, Sichuan (China)

    2015-03-27

    Viola yedoensis Makino is an important Chinese traditional medicine plant adapted to cadmium (Cd) pollution regions. Illumina sequencing technology was used to sequence the transcriptome of V. yedoensis Makino. We sequenced Cd-treated (VIYCd) and untreated (VIYCK) samples of V. yedoensis, and obtained 100,410,834 and 83,587,676 high quality reads, respectively. After de novo assembly and quantitative assessment, 109,800 unigenes were finally generated with an average length of 661 bp. We then obtained functional annotations by aligning unigenes with public protein databases including NR, NT, SwissProt, KEGG and COG. In addition, 892 differentially expressed genes (DEGs) were investigated between the two libraries of untreated (VIYCK) and Cd-treated (VIYCd) plants. Moreover, 15 randomly selected DEGs were further validated with qRT-PCR and the results were highly accordant with the Solexa analysis. This study firstly generated a successful global analysis of the V. yedoensis transcriptome and it will provide for further studies on gene expression, genomics, and functional genomics in Violaceae. - Highlights: • A de novo assembly generated 109,800 unigenes and 5,4479 of them were annotated. • 31,285 could be classified into 26 COG categories. • 263 biosynthesis pathways were predicted and classified into five categories. • 892 DEGs were detected and 15 of them were validated by qRT-PCR.

  5. Cluster-seeded synthesis of doped CdSe:Cu4 quantum dots.

    Science.gov (United States)

    Jawaid, Ali M; Chattopadhyay, Soma; Wink, Donald J; Page, Leah E; Snee, Preston T

    2013-04-23

    We report here a method for synthesizing CdSe quantum dots (QDs) containing copper such that each QD is doped with four copper ions. The synthesis is a derivative of the cluster-seed method, whereby organometallic clusters act as nucleation centers for quantum dots. The method is tolerant of the chemical identity of the seed; as such, we have doped four copper ions into CdSe QDs using [Na(H2O)3]2[Cu4(SPh)6] as a cluster seed. The controlled doping allows us to monitor the photophysical properties of guest ions with X-ray spectroscopy, specifically XANES and EXAFS at the copper K-edge. These data reveal that copper can capture both electrons and holes from photoexcited CdSe QDs. When the dopant is oxidized, photoluminescence is quenched and the copper ions translocate within the CdSe matrix, which slows the return to an emissive state.

  6. Recent Progress in Nanoelectrical Characterizations of CdTe and Cu(In,Ga)Se2

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Chun-Sheng; To, Bobby; Glynn, Stephen; Mahabaduge, Hasitha; Barnes, Teresa; Al-Jassim, Mowafak M.

    2016-11-21

    We report two recent nanoelectrical characterizations of CdTe and Cu(In, Ga)Se2 (CIGS) thin-film solar cells by developing atomic force microscopy-based nanoelectrical probes. Charges trapped at defects at the CdS/CdTe interface were probed by Kelvin probe force microscopy (KPFM) potential mapping and by ion-milling the CdTe superstrate device in a bevel glancing angle of ~0.5 degrees. The results show randomly distributed donor-like defects at the interface. The effect of K post-deposition treatment on the near-surface region of the CIGS film was studied by KPFM potential and scanning spreading resistance microscopy (SSRM) resistivity mapping, which shows passivation of grain-boundary potential and improvement of resistivity uniformity by the K treatment.

  7. XPS analysis of CdS/CuInSe{sub 2} heterojunctions

    Energy Technology Data Exchange (ETDEWEB)

    Okano, Yasunori; Nakada, Tokio; Kunioka, Akio [Department of Electrical Engineering and Electronics, Aoyama Gakuin University, Tokyo (Japan)

    1997-11-13

    CdS/CuInSe{sub 2} (CIS) heterojunctions were investigated by XPS analysis. An In-excess layer which may form an ordered vacancy compound (OVC) was present at the as-deposited CIS surface and it remained after chemical bath deposition of a CdS layer. The In-excess layer was removed by preferential etching with NH{sub 3} aqueous solution. This result implies that the surface of the as-deposited CIS film was converted from the OVC with n-type conductivity into the CIS with p-type by NH{sub 3} treatment. The conduction band offsets at the CdS/p-CIS and CdS/n-OVC were determined to be 1.0 and 0.3 eV, respectively. The CIS solar cells fabricated with n-OVC surface layer exhibited higher cell efficiencies than those fabricated with p-CIS surface layer

  8. Defect levels in CdS/CuInSe/sub 2/ thin-film solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Ramanathan, V.; Noufi, R.; Powell, R.C.

    1988-02-15

    Thermally stimulated capacitance spectroscopy has been employed to study the defect levels in high-efficiency, CdS/CuInSe/sub 2/ thin-film solar cells. Voltage bias changes were used to probe the majority-carrier traps and light bias was employed, for the first time, to reveal minority-carrier traps. The light bias thermally stimulated capacitance has shown the presence of a distribution of electron trapping levels in CuInSe/sub 2/. The capacitance under steady illumination shows that the traps produce a large photocapacitance. The implications of these observations in terms of device performance is discussed.

  9. Fractionation of Cd, Cu, Ni, Pb, and Zn in floodplain soils from Egypt, Germany and Greece

    Directory of Open Access Journals (Sweden)

    Shaheen S. M.

    2013-04-01

    Full Text Available Trace elements are potentially toxic to human life and the environment. Element toxicity depends on chemical associations in soils. Therefore, determining the chemical form of an element in soils is important to evaluate its mobility and bioavailability. Initial soil development in river floodplains influences soil properties, processes and therefore behavior of trace elements. In this study, three different floodplain soils sampled at three rivers (Nile/Egypt, Elbe/Germany and Penios/Greece were used to link soil development and properties to the geochemical fractions and mobility of some trace elements. Sequential extraction was used to fractionate five trace elements (Cd, Cu, Ni, Pb and Zn into five operationally defined groups: water soluble + exchangeable, carbonate, Fe-Mn oxide, organic, and residual. German soil showed the highest total concentration of the studied elements (except Ni. The Greek soil had the greatest amount of Ni. The residual fraction was the abundant pool for the studied elements examined in the Egyptian and Greek soils while the non-residual fraction was the dominant pool for all elements in the German soil. A significant amount (71- 94% of all elements was present in German soil in the potentially available fraction: non-residual fraction, while the amount of this fraction ranged between 9 and 39 % in Greek soil and between 9 and 34 % in Egyptian soil. These suggest that the potential availability of the studied trace elements was extremely high in German soil compared to the Egyptian and Greek soil. In the German soil, most of the non-residual Cd, Ni and Zn were bounded with the Fe-Mn oxide fraction, while Cu and Pb distributed in the organic fraction. While in the Egyptian and Greek soils Fe-Mn oxide fraction was the abundant pool for the studied elements except for Cd, in which the exchangeable and the carbonate fractions had the greatest amount of Cd. Assuming that mobility and bioavailability of these elements

  10. The properties of CdTe solar cells with ZnTe/ZnTe: Cu buffer layers

    Institute of Scientific and Technical Information of China (English)

    Song Huijin; Zheng Jiagui; Feng Lianghuan; Yan Qiang; Lei Zhi; Wu Lili; Zhang Jingquan; Li Wei; Li Bing

    2008-01-01

    CdS/CdTe solar cells with ZnTe/ZnTe:Cu buffer layers were fabricated and studied. The energy band structure of it was analyzed. The C-V, I-V characteristics and the spectral response show that the ZnTe/ZnTe:Cu buffer layers improve the back contact characteristic properties, the diode characteristics of the forward junction and the short-wave spectral response of the CdTe solar cells. The ZnTe/ZnTe:Cu buffer layers affect the solar cell conversion efficiency and its fill factor.

  11. Test of experimental set-ups for electrodialytic removal of Cu, Zn, Pb and Cd from different contaminated harbour sediments

    DEFF Research Database (Denmark)

    Nystrøm, Gunvor Marie; Ottosen, Lisbeth M.; Villumsen, Arne

    2005-01-01

    of the sediment slurry, the other without stirring. The removal of heavy metals was highest in the non-calcareous sediment, where 94% Cd, 91% Zn and 73% Cu were removed after 24 days. The highest removal obtained for the calcareous sediment was 81% Cd, 76% Zn, 75% Pb and 53% Cu after 21 days, with stirred...... was the most stable in these experiments, and thus, the stirred set-up is the best choice for experimental set-up. The order in which the heavy metals were removed from the harbour sediments was Cd>Zn>Pb>Cu....

  12. Syntheses, characterization and electrocatalytical comparison of two cadmium-containing mono-lacunary Wells-Dawson polyoxometalates, α1- and α2-[P2W17Cd(H2OO61]8-

    Directory of Open Access Journals (Sweden)

    Zonoz Farrokhzad Mohammadi

    2014-01-01

    Full Text Available Two new cadmium-containing Wells-Dawson polyoxometalates K8[α1-P2W17Cd(OH2O61]•16H2O (α1-P2W17Cd and K8[α2-P2W17Cd(OH2 O61]•16H2O (α2-P2W17Cd were synthesized as aqueous soluble potassium salts. The cadmium-substituted complexes have been characterized by IR, 31P NMR, 113Cd NMR spectroscopy and cyclic voltametry (CV. Redox activities for the tungsten and cadmium centers have been observed by using cyclic voltammetry. It was found that the presence of cadmium decreases the electrocatalytic activity of the [α1-LiP2W17O61]9- and α2-[P2W17O61]10-heteropolyanions.

  13. Does copper reduce cadmium uptake by different rice genotypes?

    Institute of Scientific and Technical Information of China (English)

    CUI Yujing; ZHANG Xuhong; ZHU Yongguan

    2008-01-01

    A hydroponics experiment was conducted to investigate the effect of copper (Cu) on cadmium (Cd),calcium (Ca),iron (Fe),and zinc (Zn) uptake by several rice genotypes.The experiment was carried out as a 2×2×4 factorial with four rice genotypes and two levels of Cu and Cd in nutrient solution.Plants were grown in a growth chamber with controlled environment.The results showed a significant difference between the biomass of different rice genotypes (P<0.001).The Cd and Cu concentration in the solution had no significant effect on the biomass.The addition of Cu significantly decreased Cd uptake by shoots and roots of rice (P<0.001).The Cd concentration did not significantly influence Ca uptake by plants,whereas the Cu concentration did (P=0.034).There was a significant influence of Cd on Fe uptake by shoots and roots (P<0.001,P=0.003,respectively).Zn uptake decreased significantly as the addition of Cd and Cu increased in shoots.We concluded that Cu had significant influence on Cd uptake.The possible mechanisms were discussed.

  14. Cadmium (II) pyrrolidine dithiocarbamate complex as single source precursor for the preparation of CdS nanocrystals by microwave irradiation and conventional heating process

    Science.gov (United States)

    Marx Nirmal, R.; Pandian, K.; Sivakumar, K.

    2011-01-01

    The complex of cadmium with pyrrolidine dithiocarbamate Cd(pdtc)2 has been used as single source precursor for the synthesis of CdS nanoparticles. The formation of CdS nanostructures was achieved by thermal decomposition of the complex under microwave irradiation and conventional heating in presence of hexadecylamine. The CdS nanoparticles with disordered close-packed structure were obtained under microwave irradiation, whereas wurtzite hexagonal phase CdS nanorods were obtained by conventional heating method (up to 150 °C). Scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and high resolution transmission electron microscopy (HRTEM) studies also were carried out to study the structure and morphology of nanoparticles. The optical property of the CdS nanoparticles was studied by UV-visible and fluorescence emission spectral studies. Fluorescence measurements on the CdS nanoparticles show a strong emission spectrum with two sub bands that are attributed to band-edge and surface-defect emissions. The reduction of a suitable cadmium metal complex is considered to be one of the single pot methods to generate CdS semiconductor nanoparticles with different shapes and high yield.

  15. Cadmium (II) pyrrolidine dithiocarbamate complex as single source precursor for the preparation of CdS nanocrystals by microwave irradiation and conventional heating process

    Energy Technology Data Exchange (ETDEWEB)

    Marx Nirmal, R. [Department of Physics, Anna University Chennai, Chennai, Tamil Nadu 600025 (India); Pandian, K. [Department of Inorganic Chemistry, University of Madras, Guindy Campus, Chennai 600025 (India); Sivakumar, K., E-mail: ksivakumar@annauniv.edu [Department of Physics, Anna University Chennai, Chennai, Tamil Nadu 600025 (India)

    2011-01-15

    The complex of cadmium with pyrrolidine dithiocarbamate Cd(pdtc){sub 2} has been used as single source precursor for the synthesis of CdS nanoparticles. The formation of CdS nanostructures was achieved by thermal decomposition of the complex under microwave irradiation and conventional heating in presence of hexadecylamine. The CdS nanoparticles with disordered close-packed structure were obtained under microwave irradiation, whereas wurtzite hexagonal phase CdS nanorods were obtained by conventional heating method (up to 150 deg. C). Scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and high resolution transmission electron microscopy (HRTEM) studies also were carried out to study the structure and morphology of nanoparticles. The optical property of the CdS nanoparticles was studied by UV-visible and fluorescence emission spectral studies. Fluorescence measurements on the CdS nanoparticles show a strong emission spectrum with two sub bands that are attributed to band-edge and surface-defect emissions. The reduction of a suitable cadmium metal complex is considered to be one of the single pot methods to generate CdS semiconductor nanoparticles with different shapes and high yield.

  16. Using Diffusion-Reaction Simulation to Study the Formation and Self-Compensation Mechanism of Cu Doping in CdTe

    Energy Technology Data Exchange (ETDEWEB)

    Guo, D.; Akis, R.; Brinkman, D.; Moore, A.; Yang, Ji-Hui; Krasikov, D.; Sankin, I.; Ringhofer, C.; Vasileska, D.

    2016-11-21

    An improved model of copper p-type doping in CdTe absorbers is proposed that accounts for the mechanisms related to tightly bound Cu(i)-Cu(Cd) and Cd(i)-Cu(Cd) complexes that both limit diffusion and cause self-compensation of Cu species. The new model explains apparent discrepancy between DFT-calculated and fitted diffusion parameters of Cu reported in our previous work, and allows for better understanding of performance and metastabilities in CdTe PV devices.

  17. Subcellular cadmium distribution and antioxidant enzymatic activities in the leaves of two castor (Ricinus communis L.) cultivars exhibit differences in Cd accumulation.

    Science.gov (United States)

    Zhang, Hanzhi; Guo, Qingjun; Yang, Junxing; Shen, Jianxiu; Chen, Tongbin; Zhu, Guangxu; Chen, Hui; Shao, Chunyan

    2015-10-01

    The aims of this study were: (1) the study of cadmium (Cd) accumulation and toxicity in different castor cultivars (Ricinus communis L.); (2) to investigate changes in antioxidant enzymatic activities and the subcellular distribution of Cd in young and old leaves from two different castor cultivars, after exposure to two different Cd concentrations, and explore the underlying mechanism of Cd detoxification focusing on antioxidant enzymes and subcellular compartmentalization. The Cd concentration, toxicity, and subcellular distribution, as well as superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD) activities were measured in Zibo-3 and Zibo-9 cultivars after exposure to two different concentrations of Cd (2mg/L and 5mg/L) for 10 days. This research revealed Cd accumulation characteristics in castor are root>stem>young leaf>old leaf. Castor tolerance was Cd dose exposure and the cultivars themselves dependent. Investigation of subcellular Cd partitioning showed that Cd accumulated mainly in the heat stable protein (HSP) and cellular debris fractions, followed by the Cd rich granule (MRG), heat denatured protein (HDP), and organelle fractions. With increasing Cd concentration in nutrient solution, the decreased detoxified fractions (BDM) and the increased Cd-sensitive fractions (MSF) in young leaves may indicate the increased Cd toxicity in castor cultivars. The BDM-Cd fractions or MSF-Cd in old leaves may be linked with Cd tolerance of different cultivars of castor. The antioxidant enzymes that govern Cd detoxification were not found to be active in leaves. Taken together, these results indicate Cd tolerance and toxicity in castor can be explained by subcellular partitioning.

  18. Initial formation and development of CdS/CuInSe2 solar cell interfaces

    Science.gov (United States)

    Kazmerski, L. L.; Russell, P. E.; Jamjoum, O.; Ireland, P. J.; Matson, R. J.; Hermann, A.; Ahrenkiel, R. K.; Mickelsen, R. A.; Chen, W. S.; Bachmann, K. J.

    Fundamental properties of interface formation in the CdS and Cd(Zn)S/CuInSe2 solar cell are investigated using surface analysis and microelectrical characterizations. The formation of a binary semiconductor transition layer during the initial stages of heterojunction growth is reported. The effects of annealing on the integrity of the various device interfaces and the performance of the cells are discussed. The evaluation of heterojunction and electrical response at other internal interfaces is studied using high resolution EBIC on fractured cell cross-sections. The importance and effects of post-deposition oxygen heat-treatments on the cell performance are discussed.

  19. Spectroscopy of Deep Traps in Cu2S-CdS Junction Structures

    Directory of Open Access Journals (Sweden)

    Eugenijus Gaubas

    2012-12-01

    Full Text Available Cu2S-CdS junctions of the polycrystalline material layers have been examined by combining the capacitance deep level transient spectroscopy technique together with white LED light additional illumination (C-DLTS-WL and the photo-ionization spectroscopy (PIS implemented by the photocurrent probing. Three types of junction structures, separated by using the barrier capacitance characteristics of the junctions and correlated with XRD distinguished precipitates of the polycrystalline layers, exhibit different deep trap spectra within CdS substrates.

  20. Frequency dispersion in the admittance of the polycrystalline Cu2S/CdS solar cell

    Science.gov (United States)

    Hmurcik, L. V.; Serway, R. A.

    1987-01-01

    The admittance versus frequency for the Cu2S/CdS solar cell was measured. In the dark, the dispersion fits a model of a simple Debye capacitor, with deviation due to grain-boundary scattering at low frequencies. Under illumination, the dispersion becomes a function of surface roughness. Modeled in fractal geometry, the admittance varies as (i x omega) exp m. A second term of this type occurs at high frequencies and at illuminations greater than 0.1 percent AM 1. In this case, the depletion layer extends deep into the CdS due to insufficient charge states at the interface.

  1. Human renal tubular cells contain CD24/CD133 progenitor cell populations: Implications for tubular regeneration after toxicant induced damage using cadmium as a model.

    Science.gov (United States)

    Shrestha, Swojani; Somji, Seema; Sens, Donald A; Slusser-Nore, Andrea; Patel, Divyen H; Savage, Evan; Garrett, Scott H

    2017-09-15

    The proximal tubules of the kidney are target sites of injury by various toxicants. Cadmium (Cd(+2)), an environmental nephrotoxicant can cause adverse effects and overt renal damage. To decipher the mechanisms involved in nephrotoxicity, an in vitro model system is required. Mortal cultures of human proximal tubule (HPT) cells have served, as models but are difficult to acquire and do not lend themselves to stable transfection. The immortalized human proximal tubule cell line HK-2, has served as a model but it lacks vectorial active transport and shows signs of lost epithelial features. Recently a new proximal tubule cell line was developed, the RPTEC/TERT1, and the goal of this study was to determine if this cell line could serve as a model to study nephrotoxicity. Global gene expression analysis of this cell line in comparison to the HK-2 and HPT cells showed that the RPTEC/TERT1 cells had gene expression patterns similar to HPT cells when compared to the HK-2 cells. The HPT and the RPTEC/TERT1 cell line had an increased population of stem/progenitor cells co-expressing CD24 and CD133 when compared to the HK-2 cells. The level of expression of cadherins, claudins and occludin molecules was also similar between the RPTEC/TERT1 and the HPT cells. Acute exposure to Cd(+2) resulted in necrosis of the RPTEC/TERT1 cells when compared to the HK-2 cells which died by apoptosis. Thus, the RPTEC/TERT1 cells are similar to HPT cells and can serve as a good model system to study mechanisms involved in toxicant induced renal damage. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. The role of Cd and Ga in the Cu(In,Ga)S{sub 2}/CdS heterojunction studied with X-ray spectroscopic methods

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Benjamin E.

    2010-08-15

    Photovoltaic cells with the structure Glass/Mo/Cu(In,Ga)S{sub 2}/CdS/i-ZnO/n+-ZnO are currently among the most successful and promising thin-layer solar cells. In this system, the Cu(In,Ga)S{sub 2} (CIS) acts as the absorber, the CdS as the buffer layer and the ZnO as the window layer. The goal of this work is the investigation of the Cu(In,Ga)S{sub 2}/CdS semiconductor heterojunction both as a component of the solar cell and as a separate material system. The characteristics of this junction were investigated both during junction formation through chemical bath deposition (CBD) and after the junction was completed. It is currently thought that the Cu(In,Ga)S{sub 2}/CdS junction is responsible for several different properties of the solar cell: lattice matching and band offset optimization between the absorber and window layer and chemical passivation of the absorber surface by the CBD-CdS process on CIS which acts to reduce the surface defect density. The Cd may also pin the Fermi Level on the CIS surface or cause a type inversion of the absorber surface from p-type to n-type. In order to investigate the junction several new methods were used along side the conventional methods of X-ray, Ultraviolet and Inverse Photoelectron Spectroscopy. These were Near-UV Constant Final State Yield Spectroscopy for the measurement of the valence band offset at the interface between CIS and CdS and Near Edge X-ray Absorption Fine Structure to follow the development of the Cu(In,Ga)S{sub 2} conduction band edge with increasing Ga concentration. Additionally, the advantages and disadvantages of the established and new methods were compared and discussed. It was discovered that the deposition of CdS neither pins the Fermi Level on the CIS surface at a position important for the solar cell, nor does it dope the absorber surface, although the deposition does lead to the formation of a Cd-containing CIS surface layer (CIS:Cd). Because this surface layer is not soluble in HCl it cannot

  3. The evaluation of growth and phytoextraction potential of Miscanthus x giganteus and Sida hermaphrodita on soil contaminated simultaneously with Cd, Cu, Ni, Pb, and Zn.

    Science.gov (United States)

    Kocoń, Anna; Jurga, Beata

    2017-02-01

    One of the cheapest, environmentally friendly methods for cleaning an environment polluted by heavy metals is phytoextraction. It builds on the uptake of pollutants from the soil by the plants, which are able to grow under conditions of high concentrations of toxic metals. The aim of this work was to assess the possibility of growing and phytoextraction potential of Miscanthus x giganteus and Sida hermaphrodita cultivated on two different soils contaminated with five heavy metals simultaneously: Cd, Cu, Ni, Pb, and Zn. A 3-year microplot experiment with two perennial energy crops, M. x giganteus and S. hermaphrodita, was conducted in the experimental station of IUNG-PIB in Poland (5° 25' N, 21° 58 'E), in the years of 2008-2010. Miscanthus was found more tolerant to concomitant soil contamination with heavy metals and produced almost double biomass than Sida in all three tested years, independent of soil type. Miscanthus collected greater amount of heavy metals (except for cadmium) in the biomass than Sida. Both energy crops absorb high levels of zinc, lower levels of lead, copper, and nickel, and absorbed cadmium at least, generally more metals were taken from the sandy soil, where plants also yielded better. Photosynthesis net rate of Miscanthus was on average 40% higher compared to Sida. Obtained results indicate that M. x giganteus and S. hermaphrodita can successfully be grown on moderately contaminated soil with heavy metals.

  4. Effects of Cd(II) and Cu(II) on microbial characteristics in 2-chlorophenol-degradation anaerobic bioreactors

    Institute of Scientific and Technical Information of China (English)

    HUANG Aiqun; CHEN Hao; CHEN Ling; DAI Yalei; ZHAO Jianfu

    2008-01-01

    The effects of Cd2+ and CU2+ at 300 mg/L on anaerobic microbial communities that degrade 2.cholorophenol(2-CP) were examined. Based on the polymerase chain reaction (PCR) of 16S rDNA, bacterial community diversity and archaeal community structure were analyzed with denaturing gradient gel electrophoresis (DGGE) and cloning,respectively.Degradation capabilities of the anaerobic microbial community were drastically abated and the degradation efficiency of 2-CP was reduced to 60%after shock by Cu2+ and Cd2+, respectively.The bacterial community structure was disturbed and the biodiversity Was reduced after shock by Cu2+ and Cdz+ for 3 d.Some new metal-resistant microbes which could cope with the new condition appeared.The sequence analysis showed that there existed common Archaea species in control sludge and systems when treated with Cu2+ and Cd2+, such as Methanothrix soehngenii,Methanosaeta concilii,uncultured euryarchaeote, and so on.Both the abundance and diversity of archaeal species were altered with addition of Cd2+ and Cu2+ at high concentration.AIthough the abundance of the predominant archaeal species decreased wim Cd2+ and Cu2+ addition for 3 d.tIley recovered to some extent after 10 d.The diversity of archaeal species Was remarkably reduced after recovery for 10 d and the shift in archaeal composition seemed to be irreversible.The 2-CP-degradation anaerobic system was more sensitive to Cu2+ than Cd2+.

  5. Cu doping concentration effect on the physical properties of CdS thin films obtained by the CBD technique

    Science.gov (United States)

    Albor Aguilera, M. L.; Flores Márquez, J. M.; Remolina Millan, A.; Matsumoto Kuwabara, Y.; González Trujillo, M. A.; Hernández Vásquez, C.; Aguilar Hernandez, J. R.; Hernández Pérez, M. A.; Courel-Piedrahita, M.; Madeira, H. T. Yee

    2017-08-01

    Cu(In, Ga)Se2 (CIGS) and Cu2ZnSnS4 (CZTS) semiconductors are direct band gap materials; when these types of material are used in solar cells, they provide efficiencies of 22.1% and 12.6%, respectively. Most traditional fabrication methods involve expensive vacuum processes including co-evaporation and sputtering techniques, where films and doping are conducted separately. On the other hand, the chemical bath deposition (CBD) technique allows an in situ process. Cu-doped CdS thin films working as a buffer layer on solar cells provide good performing devices and they may be deposited by low cost techniques such as chemical methods. In this work, Cu-doped CdS thin films were deposited using the CBD technique on SnO2:F (FTO) substrates. The elemental analysis and mapping reconstruction were conducted by EDXS. Morphological, optical and electrical properties were studied, and they revealed that Cu doping modified the CdS structure, band-gap value and the electrical properties. Cu-doped CdS films show high resistivity compared to the non-doped CdS. The appropriate parameters of Cu-doped CdS films were determined to obtain an adequate window or buffer layer on CIGS and CZTS photovoltaic solar cells.

  6. Modeling Cd and Cu mobility in soils amended by long-term urban waste compost applications

    Science.gov (United States)

    Filipović, Vilim; Cambier, Philippe; Matijević, Lana; Coquet, Yves; Pot, Valérie; Houot, Sabine; Benoit, Pierre

    2016-04-01

    Urban waste compost application to soil is an effective way for organic waste disposal and at the same time may have a positive effect on various soil rhizosphere processes. However, long term applications of organic waste amendments may lead to a noteworthy accumulation of micropollutants in soil. The long-term field experiment QualiAgro, an INRA-Veolia partnership (https://www6.inra.fr/qualiagro_eng/), has been conducted since 1998 with the objectives to characterize the agronomic value of urban composts and the environmental impacts of their application. Numerical modeling was performed using HYDRUS-2D to estimate the movement of Cd and Cu from compost incroporation in the tilled layer. Experimental plots regularly amended with co-compost of sewage sludge and green wastes (SGW), or a municipal solid waste compost (MSW) have been compared to control plot without any organic amendment (CONT). Field site was equipped with wicks lysimeters, TDR probes and tensiometers in order to determine water balance and trace metal concentrations during a 6 years' time period (2004-2010). In the tilled layer different structures (Δ - compacted clods, Γ - macroporous zone, IF - interfurrows, PP - plough pan) corresponding to the tillage and compost incorporation were delimited and reproduced in a 2-D model. The increase of Cd and Cu concentrations due to each compost addition was assumed to be located in IFs for further modeling. Four compost additions were performed during 2004-2010 period which increased the Cd and Cu concentrations in the IF zones considerably. After successful model description of water flow in highly heterogeneous soil profiles, Cd and Cu were added into the model and their fate was simulated during the same time period. Two approaches were followed to estimate plausible trace metals sorption coefficients (Kd), both while assuming equilibrium between dissolved and EDTA-extractable metals. The first approach was based on Kd estimated from ratios between

  7. New intermetallic compounds with the ErCuCd{sub 2} type of structure

    Energy Technology Data Exchange (ETDEWEB)

    Zelinska, O.Ya.; Solokha, P.G.; Pavlyuk, V.V

    2004-03-24

    The crystal structure of new RTZn{sub 2} intermetallic compounds (R=La, Ce, Tb; T=Co, Cu) was determined. The X-ray diffraction data showed that these compounds are isostructural to the new ternary compound ErCuCd{sub 2}, which was found to crystallize with a superstructure of the ErCd{sub 3} structure type (space group Cmcm, Pearson code oS16, a=0.7097(1) nm, b=1.0659(3) nm, c=0.4471(1) nm, V=0.3382(2) nm{sup 3}, Z=4). The obtained reliability factors are R{sub F}=0.0240 and R{sub w}=0.1127 for 235 unique reflections (vertical barF{sub 0} vertical bar>4.00{sigma}|F{sub 0}|)

  8. Adsorption of Cu2+, Zn2+ and Cd2+ on Bacillus subtilis

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A process of biosorption of Cu2+, Zn2+ and Cd2+ on Bacillus subtilis was investigated.The experiments show that the process of biosorption is quite fast. The maximum adsorption was reached after 5 min and hardly changed with time. The experimental data was analyzed using four sorption kinetic models: the pseudo-first-order, the Ritchie second-order, the modified second-order and the Elovich equations, which helped to determine the best-fit equation for the sorption of metal ions onto biomass. The results show that both the Ritchie second-order and modified secondorder equations can fit the experimental data. The Langmuir model is able to accurately describe adsorption of Cu2+ and Zn2+ on B. subtilis. The experimental data points of adsorption Cd2+ and Zn2+ on B. subtilis are described by Freundlich isotherms model.

  9. Is vetiver grass of interest for the remediation of Cu and Cd to protect marketing gardens in Burkina Faso?

    Science.gov (United States)

    Ondo Zue Abaga, Norbert; Dousset, Sylvie; Mbengue, Saliou; Munier-Lamy, Colette

    2014-10-01

    In Burkina-Faso, urban vegetable agriculture is often characterized by urban solid waste fertilizer inputs containing heavy metals such as Cu and Cd. Thus, the relevance of surrounding urban vegetable plots with vetiver hedges to reduce environmental pollution by Cu and Cd was investigated by adsorption studies and pot experiments. Vetiver biomass, its metal contents and, its total and MgCl2 extractable soil metals were monitored over 6months in the presence of a mixture of metal at two concentrations: 2-10 and 100-500mgkg(-1), for Cd and Cu, respectively. The Freundlich adsorption coefficient (Kf) values increased after vetiver growth and were significantly higher for vertisol than for lixisol. After 6months, the vetiver that was grown on lixisol accumulated more metal, increasing up to 4635mgkg(-1) for Cu and to 21.8mgkg(-1) for Cd, than did the vetiver that was grown on vertisol, increasing up to 1534mgkg(-1) for Cu and to 7.2mgkg(-1) for Cd. The metal bioconcentration factor, which was significantly higher for Cd, increased with the applied concentration and ranged from 1.6 to 14 for Cu and from 2.3 to 22 for Cd. Additionally, the translocation factors were higher for Cd (0.38-7.3) than for Cu (0.07-2.6), and the translocation was easiest from lixisol than from vertisol. Thus our results demonstrate the ability of vetiver for Cu and Cd phytoremediation in Burkina Faso soils. Nevertheless, these results should be confirmed across the field to advocate the establishment of vetiver hedges. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Insights into cadmium diffusion mechanisms in two-stage diffusion profiles in solar-grade Cu(In,Ga)Se{sub 2} thin films

    Energy Technology Data Exchange (ETDEWEB)

    Biderman, N. J.; Sundaramoorthy, R.; Haldar, Pradeep [Colleges of Nanoscale Science and Engineering, SUNY Polytechnic Institute, Albany, New York 12203 (United States); U.S. Photovoltaic Manufacturing Consortium, Albany, New York 12203 (United States); Novak, Steven W.; Lloyd, J. R. [Colleges of Nanoscale Science and Engineering, SUNY Polytechnic Institute, Albany, New York 12203 (United States)

    2015-12-07

    Cadmium diffusion experiments were performed on polished copper indium gallium diselenide (Cu(In,Ga)Se{sub 2} or CIGS) samples with resulting cadmium diffusion profiles measured by time-of-flight secondary ion mass spectroscopy. Experiments done in the annealing temperature range between 275 °C and 425 °C reveal two-stage cadmium diffusion profiles which may be indicative of multiple diffusion mechanisms. Each stage can be described by the standard solutions of Fick's second law. The slower cadmium diffusion in the first stage can be described by the Arrhenius equation D{sub 1} = 3 × 10{sup −4} exp (− 1.53 eV/k{sub B}T) cm{sup 2} s{sup −1}, possibly representing vacancy-meditated diffusion. The faster second-stage diffusion coefficients determined in these experiments match the previously reported cadmium diffusion Arrhenius equation of D{sub 2} = 4.8 × 10{sup −4} exp (−1.04 eV/k{sub B}T) cm{sup 2} s{sup −1}, suggesting an interstitial-based mechanism.

  11. Investigation of Pb, Cd, Cu and Mg Concentrations in Groundwater Resources of Razan Plain

    OpenAIRE

    S. Sobhan Ardakani; M. Maanijou; Asadi, H.

    2015-01-01

    Introduction & Objective: Iran is located in the dry and semi dry regions, thus almost 90% of the required fresh water is exploited from groundwater resources. Due to the increasing pol-lution of water resources, the purpose of this study was evaluation of Pb, Cd, Cu and Mg concentrations in groundwater resources of Razan Plain and preparing the zoning map using GIS. Materials & Methods: Groundwater samples were collected from 20 selected stations during two seasons in 2012. The samples were ...

  12. EDTA and citric acid mediated phytoextraction of Zn, Cu, Pb and Cd through marigold (Tagetes erecta).

    Science.gov (United States)

    Sinhal, V K; Srivastava, Alok; Singh, V P

    2010-05-01

    Phytoextraction is an emerging cost-effective solution for remediation of contaminated soils which involves the removal of toxins, especially heavy metals and metalloids, by the roots of the plants with subsequent transport to aerial plant organs. The aim of the present investigation is to study the effects of EDTA and citric acid on accumulation potential of marigold (Tagetes erecta) to Zn, Cu, Pb, and Cd and also to evaluate the impacts of these chelators (EDTA and citric acid) in combination with all the four heavy metals on the growth of marigold. The plants were grown in pots and treated with Zn (7.3 mg l(-1)), Cu (7.5 mg I(-1)), Pb (3.7 mg l(-1)) and Cd (0.2 mg l(-1)) alone and in combination with different doses of EDTA i.e., 10, 20 and 30 mg l(-1). All the three doses of EDTA i.e., 10, 20 and 30 mg l(-1) significantly increased the accumulation of Zn, Cu, Pb and Cd by roots, stems and leaves as compared to control treatments. The 30 mg l(-1) concentration of citric acid showed reduced accumulation of these metals by root, stem and leaves as compared to lower doses i.e., 10 and 20 mg l(-1). Among the four heavy metals, Zn accumulated in the great amount (526.34 mg kg(-1) DW) followed by Cu (443.14 mg kg(-1) DW), Pb (393.16 mg kg(-1) DW) and Cd (333.62 mg kg(-1) DW) in leaves with 30 mg l(-1) EDTA treatment. The highest concentration of EDTA and citric acid (30 mg l(-1)) caused significant reduction in growth of marigold in terms of plant height, fresh weight of plant, total chlorophyll, carbohydrate content and protein content. Thus EDTA and citric acid efficiently increased the phytoextractability of marigold which can be used to remediate the soil contaminated with these metals.

  13. Electrodialytic extraction of Cd and Cu from sediment from Sisimiut Harbour, Greenland

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Nystrøm, Gunvor Marie; Jensen, Pernille Erland;

    2007-01-01

    concentration with 80%). Thus a large reduction in concentrations can be obtained relatively fast. During the process of electrodialytic treatment the sediment suspension is acidified and reaches pH 2 after about 3 days (with 0.5 mA cm2), where it stabilizes. A comparison with chemical extraction in HNO3...... at about the same pH showed that 50-70% more Cu and 11% more Cd was removed during the electrodialytic treatment....

  14. [Determination of Ag, Cu, Zn and Cd in silver brazing filler metals by ICP-AES].

    Science.gov (United States)

    Yang, X

    1997-06-01

    A method of simultaneous and direct determination for Ag, Cu, Zn and Cd in silver brazing filler metals by ICP-AES is reported. The spectral interferences and effect of acidity have been investigated. Working conditions were optimized. The method has been applied to the analysis of silver brazing filler metals with RSD of 4-7% and recovery of 94-105%. This method was accurate, simple and rapid.

  15. ZnO/CdS/CuInSe{sub 2} photovoltaic cells fabricated using chemical bath deposited CdS buffer layer

    Energy Technology Data Exchange (ETDEWEB)

    Qiu, S.N.; Lam, W.W.; Qiu, C.X.; Shih, I. [Department of Electrical Engineering, McGill University, Montreal, PQ (Canada)

    1997-04-14

    CdS thin films have been prepared by using chemical bath deposition. The effects of bath temperature and concentration of NH{sub 4}OH were studied. Optimum deposition conditions were established. The resulted CdS thin films exhibit optical transmissions in excess of 90 over the majority of the solar spectrum. ZnO/CdS/CuInSe{sub 2} solar cells were fabricated on electrodeposited CuInSe{sub 2} thin films. A conversion efficiency of 6.3 was obtained with an active area of 7.8 mm{sup 2} (no AR coating)

  16. Le Tellurure de Cadmium amorphe oxygéné a - CdTe:O Synthèse et étude de quelques propriétés physico-chimiques

    OpenAIRE

    El Azhari, Youssef

    2003-01-01

    The work presented in this thesis is part of the study of the properties of thin layers of semiconductor materials based on cadmium telluride CdTe. The study of the influence of various deposition parameters on the properties of CdTe thin films has enabled us to develop a method of preparing a new material based on CdTe. It is the oxygenated amorphous cadmium telluride aCddTe: O. The thin film deposition of CdTe a-O from a target polycrystalline CdTe requires the use of a plasma high oxidizin...

  17. RECOVERY OF CADMIUM AND NICKEL FROM SCRAP Ni-Cd BATTERIES

    Institute of Scientific and Technical Information of China (English)

    J.X.Zhu; B.Yu; J.H.Li; Y.F.Nie

    2001-01-01

    Several typical methods for the recovery of Ni-Cd batteries are described in detail.Based on the comparing of hydrometallurgical and pyrometallurgical processes,the latter was selected as the suitable method for recycling Ni-Cd batteries in China.

  18. Accumulation of cadmium and copper by female Oxya chinensis(Orthopera: Acridoidea) in soil-plant-insect system

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    One purpose of this research is to present accumulation of cadmium (Cd) and copper (Cu) by female Oxya chinensis (Orthopera: Acridoidea) in a simulated soil-plant-insect ecosystem treated with Cd. Fourth-instar nymphs of O. chinensis had been fed on wheat (Triticum aestivum) seedlings contaminated with Cd and Cu for one month. In the ecosystem, the Cd concentration in wheat seedlings rose greatly with the increasing of Cd in the soil, but the Cu concentration in wheat seedlings was not found elevated. There was a highly significant difference(P<0.05) in Cd concentrations of wheat seedlings and not any significant difference(P>0.05) in Cu concentrations of wheat seedlings. The Cd and Cu concentration in different body part-head, thorax, abdomen, and hind femur, varied under different Cd concentrations in soil. There were significant differences (P<0.05) in the four parts of Cd and Cu accumulations with all treatments. The order of Cd accumulation was thorax >abdomen >head >hind femur and the Cu was abdomen > thorax >head > hind femur. The results indicated that Cd and Cu were accumulated from the soil to grasshoppers through the plant; that is to say, Cd and Cu in environment could be transported to animal or human via food chain.

  19. Experimental study of CdCl(2):CuCl photochromic coatings.

    Science.gov (United States)

    Marquez, H; Rincon, J M; Celaya, L E

    1990-09-01

    We present measurements of the spectral transmittance and photochromic response of CdCl(2):CuCl coatings. The coatings are also examined with the aid of electron micrographs. We explain the features observed in the spectral transmittance of darkened photochromic films, using a colloidal model obtained from the generalized Maxwell-Garnett theory. The colloidal model indicates the presence of ellipsoidal copper particles with a shape factor (minor axis/major axis) between 0.39 and 0.42 and mean ratios between 2.03 and 1.73 nm. The optical transmittance curve obtained in the faded state shows a peak near 280 nm attributed to Cu(+), and the curve in the darkened state shows two bands, a band located at 375 nm attributed to Cu(2+) and another at 600-610 nm assigned to colloidal copper particles.

  20. Comparison on cellular mechanisms of iron and cadmium accumulation in rice: prospects for cultivating Fe-rich but Cd-free rice.

    Science.gov (United States)

    Gao, Lei; Chang, Jiadong; Chen, Ruijie; Li, Hubo; Lu, Hongfei; Tao, Longxing; Xiong, Jie

    2016-12-01

    Iron (Fe) is essential for rice growth and humans consuming as their staple food but is often deficient because of insoluble Fe(III) in soil for rice growth and limited assimilation for human bodies, while cadmium (Cd) is non-essential and toxic for rice growth and humans if accumulating at high levels. Over-accumulated Cd can cause damage to human bodies. Selecting and breeding Fe-rich but Cd-free rice cultivars are ambitious, challenging and meaningful tasks for researchers. Although evidences show that the mechanisms of Fe/Cd uptake and accumulation in rice are common to some extent as a result of similar entry routes within rice, an increasing number of researchers have discovered distinct mechanisms between Fe/Cd uptake and accumulation in rice. This comprehensive review systematically elaborates and compares cellular mechanisms of Fe/Cd uptake and accumulation in rice, respectively. Mechanisms for maintaining Fe homeostasis and Cd detoxicification are also elucidated. Then, effects of different fertilizer management on Fe/Cd accumulation in rice are discussed. Finally, this review enumerates various approaches for reducing grain Cd accumulation and enhancing Fe content in rice. In summary, understanding of discrepant cellular mechanisms of Fe/Cd accumulation in rice provides guidance for cultivating Fe-fortified rice and has paved the way to develop rice that are tolerant to Cd stress, aiming at breeding Fe-rich but Cd-free rice.

  1. Dissolved Cu, Pb, Zn and Cd in the South China Sea surface waters

    Institute of Scientific and Technical Information of China (English)

    Huo Wenmian; Ji Weidong; Xu Kuncan

    2001-01-01

    A total of 106 surface water samples were collected in the South China Sea during two transects in June and December 1998. The samples were collected with strictly contamination free procedure and trace metals were measured by clean laboratory methods and GFAAS. The mean concentrations for the dissolved fractions are: Cu 0.100 μg/dm3, Pb 0.060 μg/dm3, Zn 0.086 μg/dm3, Cd 0.007 μg/dm3, which is close to the world open ocean's level. The spatial distribution of the trace heavy metals shows higher concentrations in offshore area and lower concentrations in the central in the South China Sea, and the concentrations decrease with the distance from the offshore, which suggests the existence of significant continental shelf input of the trace heavy metals. The correlationship among the elements is better in summer than that in winter. Cu is positively correlated with Cd in both seasons and it is also found for the first time that they are positively correlated with nutrients in the South China Sea surface waters which further indicate the biogeochemical cycle of these elements in the marine environment. The baseline value of Cu, Pb, Zn, Cd in the South China Sea surface waters is obtained through statistical analysis.

  2. Bioaccumulation dynamics and exposure routes of Cd and Cu among species of aquatic mayflies

    Science.gov (United States)

    Cain, D.; Croteau, M.-N.; Luoma, S.

    2011-01-01

    Consumption of periphyton is a potentially important route of metal exposure to benthic invertebrate grazers. The present study examined the bioaccumulation kinetics of dissolved and dietary Cd and Cu in five species of mayflies (class Insecta). Artificial stream water and benthic diatoms were separately labeled with enriched stable metal isotopes to determine physiological rate constants used by a biokinetic bioaccumulation model. The model was employed to simulate the effects of metal partitioning between water and food, expressed as the bioconcentration factor (BCF), as well as ingestion rate (IR) and metal assimilation efficiency of food (AE), on the relative importance of water and food to metal bioaccumulation. For all test species, the contribution of dietary uptake of Cd and Cu increased with BCF. For a given BCF, the contribution of food to the body burden increased with kuf, the metal uptake rate constant from food that combined variation in IR and AE. To explore the relative importance of water and diet exposure routes under field conditions, we used estimated site-specific aqueous free-ion concentrations to model Cd and Cu accumulation from aqueous exposure, exclusively. The predicted concentrations accounted for less than 5% of the observed concentrations, implying that most bioaccumulated metal was acquired from food. At least for the taxa considered in this study, we conclude that consumption of metal-contaminated periphyton can result in elevated metal body burdens and potentially increase the risk of metal toxicity. ?? 2011 SETAC.

  3. [Removal of metal ions Cu2+, Cd+ and Pb+ from solutions by sorption on slag].

    Science.gov (United States)

    Chen, Xiao; Hou, Wen-hua; Wang, Qun-hui

    2009-10-15

    Batch experiments were carried out to investigate the adsorption kinetics and thermodynamic characteristics of heavy metal ions Cu2+, Cd2+ and Pb2+ on the electric are furnace (EAF) slag from Baoshan Steel Factory. Several kinds of techniques including XRD analysis, BET specific surface analysis and SEM/EDS analysis were employed to determine the physico-chemical and surface characteristics of slag. Results indicated that the adsorption rate of heavy metal ions on the EAF slag was relatively high, and the sorption rate followed the order Cd2+ > Pb2+ > Cu2+. The adsorption kinetics obeyed first-order kinetics model (R2 > 0.99). Adsorption isotherm experiment showed that adsorption isotherm of heavy metal ions on slag fitted Langmuir model, and the maximum adsorption capacity of Cu2+, Cd2+ and Pb2+ was 0.101, 0.058 and 0.120 mmol x g(-1), respectively. The adsorption of heavy metal ions on slag was a spontaneous reaction (deltaG0 0). The effect of enthopy was the main driving force of the spontaneous adsorption reaction. The analysis results of SEM/EDS revealed the changes of surface morphology and chemical proportion before and after adsorption. Due to low-cost and high-efficiency, electric are furnace slag showed great potential for the treatment of heavy metal polluted wastewaters.

  4. Toxicity of cadmium sulfide (CdS) nanoparticles against Escherichia coli and HeLa cells

    Energy Technology Data Exchange (ETDEWEB)

    Hossain, Sk Tofajjen; Mukherjee, Samir Kumar, E-mail: dr.samirmukherjee@gmail.com

    2013-09-15

    Highlights: • Toxic effect of CdS NPs on the growth and cell division in E. coli was studied. • CdS NPs affected cell surface topology and cell division. • Downregulation of both FtsZ and FtsQ was observed due to NPs exposure. • CdS NPs affected HeLa cell morphology with fragmented nuclei. • All such effects might be due to elevated oxidative stress. -- Abstract: The present study endeavours to assess the toxic effect of synthesized CdS nanoparticles (NPs) on Escherichia coli and HeLa cells. The CdS NPs were characterized by DLS, XRD, TEM and AFM studies and the average size of NPs was revealed as ∼3 nm. On CdS NPs exposure bacterial cells changed morphological features to filamentous form and damage of the cell surface was found by AFM study. The expression of two conserved cell division components namely ftsZ and ftsQ in E. coli was decreased both at transcriptional and translational levels upon CdS NPs exposure. CdS NPs inhibited proper cell septum formation without affecting the nucleoid segregation. Viability of HeLa cells declined with increasing concentration of CdS NPs and the IC{sub 50} value was found to be 4 μg/mL. NPs treated HeLa cells showed changed morphology with condensed and fragmented nuclei. Increased level of reactive oxygen species (ROS) was found both in E. coli and HeLa cells on CdS NPs exposure. The inverse correlation between declined cell viabilities and elevated ROS level suggested that oxidative stress seems to be the key event by which NPs induce toxicity both in E. coli and HeLa cells.

  5. Structural and optical properties of Cu-doped CdTe films with hexagonal phase grown by pulsed laser deposition

    Directory of Open Access Journals (Sweden)

    F. de Moure-Flores

    2012-06-01

    Full Text Available Cu-doped CdTe thin films were prepared by pulsed laser deposition on Corning glass substrates using powders as target. Films were deposited at substrate temperatures ranging from 100 to 300 °C. The X-ray diffraction shows that both the Cu-doping and the increase in the substrate temperature promote the presence of the hexagonal CdTe phase. For a substrate temperature of 300 °C a CdTe:Cu film with hexagonal phase was obtained. Raman and EDS analysis indicate that the films grew with an excess of Te, which indicates that CdTe:Cu films have p-type conductivity.

  6. Effect of chitosan on the available contents and vertical distribution of Cu2+ and Cd2+ in different textural soils.

    Science.gov (United States)

    Guo, Zhi; Hu, Xiang; Ao, Yansong

    2009-08-15

    Chitosan, an environment-friendly biopolymer, has been adopted to remedy contaminated soils by heavy metals of Cu(2+) and Cd(2+). Experimental results demonstrated that, within the first 7d, available Cu(2+) and Cd(2+) contents in three textural soils (clay, loam, and sandy soil) decreased significantly after chitosan application. Moreover, the available Cu(2+) and Cd(2+) contents in soil layers of 14-16 cm and 24-26 cm were significantly reduced than that in 4-6 cm after 7d of chitosan application. Our investigation suggested that application of 0.9 g chitosan kg(-1) DW soil for 7d could be perfect for the remediation of the soil contaminated by Cu(2+) and Cd(2+).

  7. Mobility and speciation of Cd,Cu,and Zn in two acidic soils affected by simulated acid rain

    Institute of Scientific and Technical Information of China (English)

    GUO Zhao-hui; LIAO Bo-han; HUANG Chang-yong

    2005-01-01

    Through a batch experiment, the mobility and speciation of heavy metals(Cd, Cu, Zn) in two acidic forest soils from Hunan Province were studied. The results showed that the release and potential active speciation of Cd, Cu, and Zn in the tested contaminated red soil(CRS) and yellow red soil(CYRS) increased significantly with pH decreasing and ion concentrations increasing of simulated acid rain, and these effects were mainly decided by the pH value of simulated acid rain. Cd had the highest potential risk on the environment compared with Cu and Zn. Cd existed mainly in exchangeable form in residual CRS and CYRS, Cu in organically bound and Mn-oxide occluded forms, and Zn in mineral forms due to the high background values.

  8. Geochemical Transformation of Cadmium (Cd) from Creek to Paddy Fields in W Thailand

    Science.gov (United States)

    Kosolsaksakul, Peerapat; Graham, Margaret; Farmer, John

    2013-04-01

    Extensive Cd contamination of paddy soils in Tak Province, western Thailand, a consequence of Zn mining activities, was first established in 2005 and medical studies showed that the health of local communities was being impaired. Mae Tao, Tak Province, comprising many paddy fields and irrigation canals, has been selected for this study of the geochemical transformation of Cd from the contamination source in the mountainous region to the east of the study site through the community irrigation system to the paddy soils. The aim of this research is to (i) investigate the geochemical transformation of Cd as it is transported from the main irrigation creek through the canals and to the paddy fields, (ii) assess the availability of Cd to rice plants, which may be affected by both chemical and physical factors, and (iii) trial some practical treatments to minimise Cd concentrations in rice grains. Soils, irrigation canal sediments and water samples were collected during the dry season and at the onset of the rainy season. Rice samples were collected at harvesting time and samples of soil fertiliser were also obtained. Water samples were filtered, ultrafiltered and analysed by ICP-MS whilst sub-samples of dried, ground soils and sediments were first subjected to micro-wave assisted acid digestion (modified US EPA method 3052). XRD and SEM-EDX methods were used for mineralogical characterisation and selective chemical extractions have assisted in the characterisation of solid phase Cd associations. Soil Cd concentrations were in the range 2.5-87.6 µg g-1, with higher values being obtained for fields furthest from the main creek. Although current irrigation water Cd inputs are low (mean 1.9 μg L-1; flood period), high loads of suspended particles still contribute additional Cd (4.2-9.8 µg L-1) to the paddy fields. For bioavailability assessment by a 3-step BCR sequential extraction, 70-90% Cd was in the exchangeable; HOAc-extractable fraction. That indicated that most of

  9. Cadmium (II) and lead (II) transport in a polymer inclusion membrane using tributyl phosphate as mobile carrier and CuFeO{sub 2} as a polarized photo electrode

    Energy Technology Data Exchange (ETDEWEB)

    Arous, Omar, E-mail: omararous@yahoo.fr [Laboratory of Hydrometallurgy and Inorganic Molecular Chemistry, USTHB Faculty of Chemistry, BP32 El Alia 16111 (Algeria); Center of Research in Physical and Chemical Analysis CRAPC, BP 248, Algiers RP 16004 (Algeria); Amara, Mourad [Laboratory of Hydrometallurgy and Inorganic Molecular Chemistry, USTHB Faculty of Chemistry, BP32 El Alia 16111 (Algeria); Center of Research in Physical and Chemical Analysis CRAPC, BP 248, Algiers RP 16004 (Algeria); Trari, Mohamed; Bouguelia, Aissa [Laboratory of Storage and Renewable Energies, USTHB Faculty of Chemistry, BP 32, Algiers, 16111 (Algeria); Kerdjoudj, Hacene [Laboratory of Hydrometallurgy and Inorganic Molecular Chemistry, USTHB Faculty of Chemistry, BP32 El Alia 16111 (Algeria)

    2010-08-15

    In this work, a development of polymeric inclusion membranes for the cations separation is reported. The membrane was made up of cellulose triacetate (CTA) with a tributyl phosphate (TBP) incorporated into the polymer as metal ions carrier. The transport of lead (II) and cadmium (II) ions in two membrane systems polymer inclusion membrane (PIM), PIM coupled with photo-chemical electrode using TBP as carrier and 2-nitro phenyl octyl ether (NPOE) or tris ethylhexyl phosphate (TEHP) as plasticizer have been investigated. The membranes: polymer + plasticizer + carrier were synthesized and characterized by FTIR, X-ray diffraction and scanning electron microscopy (SEM). Transports of lead and cadmium have been studied using these systems and the results were compared to commercial cation exchange membrane (CRA). The obtained results showed that for Pb{sup 2+} ion, the concentrations of the strip phase increases using synthesized membranes. The conduction band of the delafossite CuFeO{sub 2} (-1.25 V{sub SCE}) yields a thermodynamically M{sup 2+} (=Pb{sup 2+}, Cd{sup 2+}) photo electrodeposition and speeds up the diffusion process. In all the cases, the potential of the electrode M/M{sup 2+} in the feed compartment increases until a maximum value, reached at {approx}100 min above which it undergoes a diminution.

  10. Properties of RF sputtered cadmium telluride (CdTe) thin films: Influence of deposition pressure

    Science.gov (United States)

    Kulkarni, R. R.; Pawbake, A. S.; Waykar, R. G.; Rondiya, S. R.; Jadhavar, A. A.; Pandharkar, S. M.; Karpe, S. D.; Diwate, K. D.; Jadkar, S. R.

    2016-04-01

    Influence of deposition pressure on structural, morphology, electrical and optical properties of CdTe thin films deposited at low substrate temperature (100°C) by RF magnetron sputtering was investigated. The formation of CdTe was confirmed by low angle XRD and Raman spectroscopy. The low angle XRD analysis revealed that the CdTe films have zinc blende (cubic) structure with crystallites having preferred orientation in (111) direction. Raman spectra show the longitudinal optical (LO) phonon mode peak ˜ 165.4 cm-1 suggesting high quality CdTe film were obtained over the entire range of deposition pressure studied. Scanning electron microscopy analysis showed that films are smooth, homogenous, and crack-free with no evidence of voids. The EDAX data revealed that CdTe films deposited at low deposition pressure are high-quality stoichiometric. However, for all deposition pressures, films are rich in Cd relative to Te. The UV-Visible spectroscopy analysis show the blue shift in absorption edge with increasing the deposition pressure while the band gap show decreasing trend. The highest electrical conductivity was obtained for the film deposited at deposition pressure 1 Pa which indicates that the optimized deposition pressure for our sputtering unit is 1 Pa. Based on the experimental results, these CdTe films can be useful for the application in the flexible solar cells and other opto-electronic devices.

  11. Toxicity of cadmium sulfide (CdS) nanoparticles against Escherichia coli and HeLa cells.

    Science.gov (United States)

    Hossain, Sk Tofajjen; Mukherjee, Samir Kumar

    2013-09-15

    The present study endeavours to assess the toxic effect of synthesized CdS nanoparticles (NPs) on Escherichia coli and HeLa cells. The CdS NPs were characterized by DLS, XRD, TEM and AFM studies and the average size of NPs was revealed as ∼3 nm. On CdS NPs exposure bacterial cells changed morphological features to filamentous form and damage of the cell surface was found by AFM study. The expression of two conserved cell division components namely ftsZ and ftsQ in E. coli was decreased both at transcriptional and translational levels upon CdS NPs exposure. CdS NPs inhibited proper cell septum formation without affecting the nucleoid segregation. Viability of HeLa cells declined with increasing concentration of CdS NPs and the IC₅₀ value was found to be 4 μg/mL. NPs treated HeLa cells showed changed morphology with condensed and fragmented nuclei. Increased level of reactive oxygen species (ROS) was found both in E. coli and HeLa cells on CdS NPs exposure. The inverse correlation between declined cell viabilities and elevated ROS level suggested that oxidative stress seems to be the key event by which NPs induce toxicity both in E. coli and HeLa cells.

  12. CdS quantum dots modified CuO inverse opal electrodes for ultrasensitive electrochemical and photoelectrochemical biosensor

    OpenAIRE

    2015-01-01

    The CuO inverse opal photonic crystals (IOPCs) were synthesized by the sol-gel method and modified with CdS quantum dots by successive ionic layer adsorption and reaction (SILAR). CdS QDs modified CuO IOPCs FTO electrodes of different SILAR cycles were fabricated and their electrochemical properties were studied by cyclic voltammetry (CV) and chronoamperometry (I–t). Structure and morphology of the samples were characterized by transmission electron microscopy (TEM), scanning electron microsc...

  13. The electron affinity difference in CdS/CuInSe{sub 2} solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Al Kuhaimi, Siham A. [Physics Department, Faculty of Education, Siteen St. Malaz, Riyadh-Saudi Arabia, Riyadh (Saudi Arabia)

    1998-03-16

    The electron affinity difference {Delta}E{sub c}={chi}{sub 1}-{chi}{sub 2}, in CdS/CuInSe{sub 2} solar cells fabricated by four different processes has been measured from observations of the variations of open-circuit voltages with temperature. For CdS/CuInSe{sub 2} cells the values of {Delta}E{sub c} lie between 0.20 and 0.30 eV and are found to be independent of the process of cell fabrication. The use of CdZnS in place of CdS reduces the value of {Delta}E{sub c} to slightly less than 0.1 eV. The method used for the measurement of {Delta}E{sub c} is very simple. The values of the saturation current I{sub 0} for the different types of cells have been estimated from the slopes of qV{sub oc} versus kT characteristics and compared with those obtained from ln I versus V curves. The values of I{sub 0} found for each cell by the two methods are in fair agreement

  14. Transcriptional regulation of metal transport genes and mineral nutrition during acclimatization to cadmium and zinc in the Cd/Zn hyperaccumulator, Thlaspi caerulescens (Ganges population).

    Science.gov (United States)

    Küpper, Hendrik; Kochian, Leon V

    2010-01-01

    We investigated changes in mineral nutrient uptake and cellular expression levels for metal transporter genes in the cadmium (Cd)/zinc (Zn) hyperaccumulator, Thlaspi caerulescens during whole plant and leaf ontogenesis under different long-term treatments with Zn and Cd. Quantitative mRNA in situ hybridization (QISH) revealed that transporter gene expression changes not only dependent on metal nutrition/toxicity, but even more so during plant and leaf development. The main mRNA abundances found were: ZNT1, mature leaves of young plants; ZNT5, young leaves of young plants; MTP1 (= ZTP1 = ZAT), young leaves of both young and mature plants. Surprisingly different cellular expression patterns were found for ZNT1 and ZNT5, both belonging to the ZIP family of transition metal transporters: ZNT1, photosynthetic mesophyll and bundle sheath cells; ZNT5, nonphotosynthetic epidermal metal storage cells and bundle sheath cells. Thus, ZNT1 may function in micronutrient nutrition while ZNT5 may be involved in metal storage associated with hyperaccumulation. Cadmium inhibited the uptake of Zn, iron (Fe) and manganese (Mn), probably by competing for transporters or by interfering with the regulation of transporter gene expression. Cadmium-induced changes in cellular expression for ZNT1, ZNT5 and MTP1 could also be part of plant acclimatization to Cd toxicity. Defence against Cd toxicity involved enhanced uptake of magnesium (Mg), calcium (Ca) and sulphur (S).

  15. Role of microbial inoculation and chitosan in phytoextraction of Cu, Zn, Pb and Cd by Elsholtzia splendens - a field case

    Energy Technology Data Exchange (ETDEWEB)

    Wang Fayuan [Agricultural College, Henan University of Science and Technology, 70 Tianjin Road, Luoyang, Henan Province 471003 (China) and Institute of Soil Science, Chinese Academy of Sciences, Nanjing, Jiangsu Province 210008 (China)]. E-mail: wfy1975@163.com; Lin Xiangui [Institute of Soil Science, Chinese Academy of Sciences, Nanjing, Jiangsu Province 210008 (China); Yin Rui [Institute of Soil Science, Chinese Academy of Sciences, Nanjing, Jiangsu Province 210008 (China)

    2007-05-15

    A field experiment was carried out to study the effect of microbial inoculation on heavy metal phytoextraction by Elsholtzia splendens and whether chitosan could have a synergistic effect with the microbial inocula. The microbial inocula consisted of a consortium of arbuscular mycorrhizal fungi and two Penicillium fungi. Three treatments were included: the control, inoculation with microbial inocula, and the inoculation combined with chitosan. Microbial inoculation increased plant biomass especially shoot dry weight, enhanced shoot Cu, Zn and Pb concentrations but did not affect Cd, leading to higher shoot Cu, Zn, Pb and Cd uptake. Compared with microbial inoculation alone, chitosan application did not affect plant growth but increased shoot Zn, Pb and Cd concentrations except Cu, which led to higher phytoextraction efficiencies and partitioning to shoots of Zn, Pb and Cd. These results indicated synergistic effects between microbial inocula and chitosan on Zn, Pb and Cd phytoextraction. - Co-application of microbial inocula and chitosan enhanced heavy metal phytoextraction by E. splendens.

  16. Growth control, structure, chemical state, and photoresponse of CuO-CdS core-shell heterostructure nanowires.

    Science.gov (United States)

    El Mel, A A; Buffière, M; Bouts, N; Gautron, E; Tessier, P Y; Henzler, K; Guttmann, P; Konstantinidis, S; Bittencourt, C; Snyders, R

    2013-07-05

    The growth of single-crystal CuO nanowires by thermal annealing of copper thin films in air is studied. We show that the density, length, and diameter of the nanowires can be controlled by tuning the morphology and structure of the copper thin films deposited by DC magnetron sputtering. After identifying the optimal conditions for the growth of CuO nanowires, chemical bath deposition is employed to coat the CuO nanowires with CdS in order to form p-n nanojunction arrays. As revealed by high-resolution TEM analysis, the thickness of the polycrystalline CdS shell increases when decreasing the diameter of the CuO core for a given time of CdS deposition. Near-edge x-ray absorption fine-structure spectroscopy combined with transmission x-ray microscopy allows the chemical analysis of isolated nanowires. The absence of modification in the spectra at the Cu L and O K edges after the deposition of CdS on the CuO nanowires indicates that neither Cd nor S diffuse into the CuO phase. We further demonstrate that the core-shell nanowires exhibit the I-V characteristic of a resistor instead of a diode. The electrical behavior of the device was found to be photosensitive, since increasing the incident light intensity induces an increase in the collected electrical current.

  17. Differential influences of Cu and Zn chronic exposure on Cd and Hg bioaccumulation in an estuarine oyster.

    Science.gov (United States)

    Liu, Fengjie; Wang, Wen-Xiong

    2014-03-01

    In this study, the effects of Cu and Zn exposure, alone and in combination, on the bioaccumulation of Cd and Hg were investigated in an estuarine oyster Crassostrea hongkongensis under different salinity gradients. We showed that Zn, but not Cu, exposure significantly enhanced the Cd bioaccumulation. In contrast, both Cu and Zn exposure significantly enhanced the Hg bioaccumulation. Combined exposure and salinity did not affect the metal interactions in oysters. The increased tissue concentrations of Cd or Hg were associated with their increased storage in inducible metal-binding ligands (e.g. metallothionein-like proteins, MTLP) by Cu/Zn exposure. The differential roles of Cu and Zn exposure in Cd and Hg bioaccumulation resulted from their contrasting ligand induction and affinities. Analysis of field collected oysters indicated that Cu/Zn exposure was a significant contributor to tissue concentrations of Cd, Cu and Hg. Overall, biochemical/physiological changes of the animals chronically exposed to metal stressors played a key role in affecting tissue concentrations of other metals. One metal's ability to enhance the bioaccumulation of other metals depended upon the relative affinities of the metals for MTLP.

  18. Effects of Pb2+, Cd2+ and Cu2+ on the Aqueous Zn2+ Sorption by Hydroxyapatite

    Institute of Scientific and Technical Information of China (English)

    QI Yong; LIU Yu

    2006-01-01

    In this paper, the behaviors of aqueous zinc sorption by hydroxyapatite in the co-existence of Pb2+, Cd2+ and Cu2+ are investigated, the effects of Pb2+, Cd2+ and Cu2+ on the sorption of Zn2+ are discussed, and the hydroxyapatite sorption capabilities for Pb2+, Cd2+, Cu2+ and Zn2+ are compared.The experimental results show that the Zn2+ removal efficiency decreases gradually with the increase of the Cd2+ concentration of the solution, and there is no sorption preference between Cd2+ and Zn2+. On the other hand, the Zn2+ removal efficiency rapidly decreases rapidly with the increase of the Cu2+ concentration of the solution, and there is a clear sorption preference between Cu2+ and Zn2+. It is noticed that the Zn2+ removal efficiency is hardly changed with the variance of Pb2+ concentration because the removal mechanisms for these two ions are totally different. It is concluded that the adsorption affinities of the heavy metals for the hydroxyapatite follows this sequence: Pb2+> Cu2+>Cd2+> Zn2+.

  19. Blood and urine cadmium and bioelements profile in nickel-cadmium battery workers in Serbia.

    Science.gov (United States)

    Bulat, Z Plamenac; Dukic-Cosic, D; Dokic, M; Bulat, P; Matovic, V

    2009-03-01

    Although cadmium (Cd) is extensively used for nickel-cadmium battery production, few recent reports are available on the effect of this toxic metal on the imbalance of biometals in occupational exposure. The current study was carried out to determine the Cd level and its effect on the content of bioelements: zinc, cooper, magnesium, and iron in blood and urine of workers exposed to Cd during nickel-cadmium battery production. beta(2)-microglobulins (beta(2)-MG), as indicators of kidney damage, were determined in urine.The study group comprised 32 male nickel-cadmium battery workers, and the control group had 15 male construction workers with no history of Cd exposure. Levels of Cd and bioelements were determined in blood and urine by atomic absorption spectrophotometry.Cd concentration in blood of exposed workers was around 10 microg/L and in urine ranged from 1.93 to 8.76 microg/g creatinine (cr). Urine Cd concentration was significantly higher in exposed workers than in the controls, although no statistical difference in beta(2)-MG content was observed in urine between the two groups. Blood Zn and Mg level were significantly reduced and urine Zn level was increased in Cd-exposed group when compared with controls.The mean Cd concentrations in blood and urine did not exceed the recommended reference values of 10 microg/L in blood and 10 microg/g cr in urine. Cd exposure resulted in disturbances of Zn in blood and urine and Mg in blood but had no effect on Cu and Fe content in biological fluids.

  20. Effect of pulse current on acidification and removal of Cu, Cd, and As during suspended electrodialytic soil remediation

    DEFF Research Database (Denmark)

    Sun, Tian Ran; Ottosen, Lisbeth M.; Jensen, Pernille Erland

    2013-01-01

    , predominately working under overlimiting current density conditions. Soil 1 was sampled from a pile of excavated soil at a site with mixed industrial pollution (Cu and Cd), and soil 2 was sampled from the top layer of a wood preservation site (Cu and As). Results showed that pulse current improved...

  1. Photocatalytic reduction of Cr(VI) on the novel hetero-system CuFe{sub 2}O{sub 4}/CdS

    Energy Technology Data Exchange (ETDEWEB)

    Nasrallah, N.; Kebir, M. [Laboratory of Engineering Reaction, Faculty of Engineering Mechanic and Engineering Processus (USTHB), BP 32, Algiers (Algeria); Koudri, Z. [Laboratory of Storage and Valorization of Renewable Energies, Faculty of Chemistry (USTHB), BP 32, Algiers (Algeria); Trari, M., E-mail: solarchemistry@gmail.com [Laboratory of Storage and Valorization of Renewable Energies, Faculty of Chemistry (USTHB), BP 32, Algiers (Algeria)

    2011-01-30

    The photocatalytic HCrO{sub 4}{sup -} reduction was investigated in air equilibrated solution using the spinel CuFe{sub 2}O{sub 4} nanoparticles as sensitizers. The oxide is p-type semi conductor, prepared from nitrates decomposition. The catalytic performance increases with decreasing pH and the concomitant oxidation of salicylic acid contributes significantly to the photoactivity through the charges separation of electron/hole pairs (C{sub 7}H{sub 6}O{sub 3} + 6 O{sub 2} + 4 h{sup +} + 3 H{sub 2}O {yields} 7 CO{sub 2} + 4 H{sub 3}O{sup +}). Evidence has been given to show the advantages of the hetero-system CuFe{sub 2}O{sub 4}/CdS in the chromate reduction. CuFe{sub 2}O{sub 4} acts as electrons pump and the electron transfer to chromate is mediated via CdS hexagonal variety (greenockite). A reduction of 60% occurs and the process is well described by a pseudo first order kinetic with a half life of {approx}2.8 h and a quantum yield of {approx}0.12% for an initial HCrO{sub 4}{sup -} concentration of 3 x 10{sup -4} M. An improvement up to 72% is obtained when the reaction occurs in a stirred reactor and no cadmium was detected after 6 h illumination. The results indicate a competitive effect with the water reduction. The hydrogen evolutions are found to be 0.236 and 0.960 cm{sup 3} mn{sup -1} g{sup -1} in presence and in absence of HCrO{sub 4}{sup -}, respectively.

  2. Photocatalytic reduction of Cr(VI) on the novel hetero-system CuFe(2)O(4)/CdS.

    Science.gov (United States)

    Nasrallah, N; Kebir, M; Koudri, Z; Trari, M

    2011-01-30

    The photocatalytic HCrO(4)(-) reduction was investigated in air equilibrated solution using the spinel CuFe(2)O(4) nanoparticles as sensitizers. The oxide is p-type semi conductor, prepared from nitrates decomposition. The catalytic performance increases with decreasing pH and the concomitant oxidation of salicylic acid contributes significantly to the photoactivity through the charges separation of electron/hole pairs (C(7)H(6)O(3)+6 O(2)+4h(+)+3 H(2)O → 7 CO(2)+4 H(3)O(+)). Evidence has been given to show the advantages of the hetero-system CuFe(2)O(4)/CdS in the chromate reduction. CuFe(2)O(4) acts as electrons pump and the electron transfer to chromate is mediated via CdS hexagonal variety (greenockite). A reduction of 60% occurs and the process is well described by a pseudo first order kinetic with a half life of ∼2.8h and a quantum yield of ∼0.12% for an initial HCrO(4)(-) concentration of 3 × 10(-4)M. An improvement up to 72% is obtained when the reaction occurs in a stirred reactor and no cadmium was detected after 6h illumination. The results indicate a competitive effect with the water reduction. The hydrogen evolutions are found to be 0.236 and 0.960 cm(3)mn(-1)g(-1) in presence and in absence of HCrO(4)(-), respectively.

  3. Characterization of a degraded cadmium yellow (CdS) pigment in an oil painting by means of synchrotron radiation based X-ray techniques.

    Science.gov (United States)

    Van der Snickt, Geert; Dik, Joris; Cotte, Marine; Janssens, Koen; Jaroszewicz, Jakub; De Nolf, Wout; Groenewegen, Jasper; Van der Loeff, Luuk

    2009-04-01

    On several paintings of James Ensor (1860-1949), a gradual fading of originally bright yellow areas, painted with the pigment cadmium yellow (CdS), is observed. Additionally, in some areas exposed to light, the formation of small white-colored globules on top of the original paint surface is observed. In this paper the chemical transformation leading to the color change and to the formation of the globules is elucidated. Microscopic X-ray absorption near-edge spectroscopy (mu-XANES) experiments show that sulfur, originally present in sulfidic form (S(2-)), is oxidized during the transformation to the sulfate form (S(6+)). Upon formation (at or immediately below the surface), the highly soluble cadmium sulfate is assumed to be transported to the surface in solution and reprecipitates there, forming the whitish globules. The presence of cadmium sulfate (CdSO(4).2H(2)O) and ammonium cadmium sulfate [(NH(4))(2)Cd(SO(4))(2)] at the surface is confirmed by microscopic X-ray diffraction measurements, where the latter salt is suspected to result from a secondary reaction of cadmium sulfate with ammonia. Measurements performed on cross sections reveal that the oxidation front has penetrated into the yellow paint down to ca. 1-2 microm. The morphology and elemental distribution of the paint and degradation product were examined by means of scanning electron microscopy equipped with an energy-dispersive spectrometer (SEM-EDS) and synchrotron radiation based micro-X-ray fluorescence spectrometry (SR micro-XRF). In addition, ultraviolet-induced visible fluorescence photography (UIVFP) revealed itself to be a straightforward technique for documenting the occurrence of this specific kind of degradation on a macroscale by painting conservators.

  4. Combined toxicity of copper and cadmium to six rice genotypes (Oryza sativa L.)

    Institute of Scientific and Technical Information of China (English)

    HUANG Yizong; HU Ying; LIU Yunxia

    2009-01-01

    Accumulation of copper (Cu) and cadmium (Cd) in six rice cultivars (94D-22, 94D-54, 94D-64, Gui630, YY-1 and KY1360) was evaluated through exposure to heavy metal contamination (100 mg/kg Cu, 1.0 mg/kg Cd, and 100 mg/kg Cu + 1.0 mg/kg Cd) in a greenhouse. The dry weight of shoot and root, concentrations of Cu and Cd in plant tissues and the Cu, Cd, P, Fe concentrations in the root surface iron plaques were analyzed eight weeks later after treatment. The results indicated that the plant biomass was mainly determined by rice genotypes, not Cu and Cd content in soil. Separated treatment with Cu/Cd increased each metal level in shoot, root and iron plaques. Soil Cu enhanced Cd accumulation in tissues. In contrast, Cu concentrations in shoot and root was unaffected by soil Cd. Compared to single metal contamination, combined treatment increased Cd content by 110.6%, 77.0% and 45.2% in shoot, and by 112.7%, 51.2% and 18.4% in root for Gui630, YY-1 and KY1360, respectively. The content level of Cu or Cd in root surface iron plaques was not affected by their soil content. Cu promoted Fe accumulation in iron plaques, while Cd has no effect on P and Fe accumulation in it. The translocation of Cu and Cd from iron plaques to root and shoot was also discussed. These results might be beneficial in selecting cultivars with low heavy metal accumulation and designing strategies for soil bioremediation.

  5. Evolution of different morphologies of CdS nanoparticles by thermal decomposition of bis(thiourea)cadmium chloride in various solvents

    Energy Technology Data Exchange (ETDEWEB)

    Gaur, Rama; Jeevanandam, P., E-mail: jeevafcy@iitr.ernet.in, E-mail: jeevafcy@iitr.ac.in [Indian Institute of Technology Roorkee, Department of Chemistry (India)

    2015-03-15

    CdS nanoparticles with different morphologies have been synthesized by thermal decomposition of bis(thiourea)cadmium chloride in different solvents without the use of any ligand/surfactant. CdS nanoparticles with pyramid, sponge-like and hexagonal disc-like morphologies were obtained in diphenyl ether (DPE), 1-octadecene (ODE) and ethylene glycol (EG), respectively. In addition, CdS nanoparticles with unique morphologies were obtained when the decomposition of the complex was carried out in mixed solvents (DPE–EG and ODE–EG). Extensive characterization of the CdS nanoparticles was carried out using powder X-ray diffraction, FT-IR spectroscopy, thermal analysis, field-emission scanning electron microscopy, diffuse reflectance spectroscopy and photoluminescence spectroscopy, and detailed mechanism of the formation of CdS nanoparticles with different morphologies in various solvents has been proposed.

  6. Modification of ZnO Thin Films by Ni, Cu, and Cd Doping*1

    Science.gov (United States)

    Jiménez-González, A. E.

    1997-02-01

    With the propose of investigating the effect of transition elements in ZnO thin films prepared by the Successive Ion Layer Adsorption and Reaction (SILAR) technique, the deposition solutions were chemically impurified with Ni, Cu, and Cd, as elements of the Ib, IIb, and VIIIa groups. X-ray fluorescence (XRF) analyses confirm that the impurification with Ni and Cu in fact took place but the impurification with Cd did not, while the XRD analyses show that foras preparedand Ni-impurified annealed films, the crystallites are almost oriented along thecaxis. The electrical properties of the ZnO films were also modified with the impurification. After annealing in air (450°C) the dark conductivity of the films was increased in the case of Ni and Cd impurification up to 1.80×10-3and 1.86×10-2[Ω cm]-1, respectively, but it decreased drastically in the case of Cu to 5.51×10-7[Ω cm]-1, as referred to the dark conductivity (1.86×10-4[Ω cm]-1) of the pure ZnO sample. The measured activation energy for the electrical conductivity of the modified ZnO thin films is 55 meV for the Ni modification, indicating the existence of donor levels. On the other hand, the Cu modification increases the activation energy up to 132 meV, which is higher than the activation energy for pure ZnO thin films (98 meV).

  7. Influences of petroleum on accumulation of copper and cadmium in the polychaete Nereis diversicolor

    Institute of Scientific and Technical Information of China (English)

    SUN Fu-hong; ZHOU Qi-xing; ZHANG Qian-ru

    2006-01-01

    Using the exposure simulation experiment, the action of petroleum affecting the accumulation of the trace metals including copper (Cu) and cadmium (Cd) in littoral polychaete Nereis diversicolor collected from the Shuangtaizi Estuary in Liaoning Province,China was examined. The results showed that there was a markedly non-linear relationship between the accumulation of Cu in worms and the experimental concentration of Cu in exposure solutions when the concentration of petroleum remained at 0, 100, and 220 μl/L, respectively. However, significantly non-linear relationship for worms exposed to Cd was observed only when the concentration of added petroleum was 0 and 220 μl/L. The accumulation of Cu in worms did not differ significantly among the three different levels of petroleum concentrations combined with various concentrations of Cu. So was the accumulation of Cd in worms (p>0.05).However, the addition of petroleum in exposure solutions brought about an increase in the accumulation of Cu in Nereis diversicolor,in comparison with single Cu pollution. On the other hand, when the concentration of added petroleum remained at 100 μl/L, the accumulation of Cd in worms was lower than that in worms exposed to various concentrations of only cadmium. However, the worms exposed to Cd and petroleum 220 μl/L did not show obvious and identical increase in the accumulation of Cd, compared with single Cd exposure. The accumulation of both Cu and Cd in worms did not increase significantly with the increases in concentrations of Cu or Cd in exposure solutions combined with petroleum (0, 100, and 220 μl/L) under the experimental conditions. Although Nereis diversicolor is exposed to very high Cu and Cd in exposure solutions, accumulation and detoxification mechanisms are sufficient to cope with the extra metal influx in order to survive.

  8. Role of oxygen in CuInSe/sub 2/ thin films and CdS/CuInSe/sub 2/ devices

    Energy Technology Data Exchange (ETDEWEB)

    Noufi, R.; Matson, R.J.; Powell, R.C.; Herrington, C.

    1986-01-15

    The solar cell device CdS/CuInSe/sub 2/ has been shown to require a post-treatment in air at about 200/sup 0/C to reach its state-of-the-art efficiency of close to 11%. We have shown that treating the device in a solution of chemical oxidants has the same effect as the annealing in air. The results of oxidation can be reversed by treating the device in a solution of a reducing agent (hydrazine). Several experimental techniques were employed to show that the oxidation process, whether it is chemical or air annealing, serves to introduce oxygen into the CuInSe/sub 2/ whereas the reduction process serves to remove it. The acceptance of oxygen depends on the stoichiometry of CuInSe/sub 2/, and in turn affects the electrical properties. It is this interdependence between stoichiometry and the incorporation of oxygen which determines the extent of improvement in the CdS/CuInSe/sub 2/ performance. We have also shown that the oxygen in the CuInSe/sub 2/ can be dislodged from the beam induced current measurements on the CdS/CuInSe/sub 2/ and argue that the oxygen is being partially removed from the CuInSe/sub 2/ layer by the electron beam and hence show a buried homojunction rather than the expected heterojunction. Finally, we demonstrate how we can use the role of oxygen in this material to improve the electrical properties of the CuInSe/sub 2/ thin film and the performance of the CdS/CuInSe/sub 2/ device.

  9. Distribution, mobility, and pollution assessment of Cd, Cu, Ni, Pb, Zn, and Fe in intertidal surface sediments of Sg. Puloh mangrove estuary, Malaysia.

    Science.gov (United States)

    Udechukwu, Bede Emeka; Ismail, Ahmad; Zulkifli, Syaizwan Zahmir; Omar, Hishamuddin

    2015-03-01

    Sungai Puloh mangrove estuary supports a large diversity of macrobenthic organisms and provides social benefits to the local community. Recently, it became a major recipient of heavy metals originating from industries in the hinterland as a result of industrialization and urbanization. This study was conducted to evaluate mobility and pollution status of heavy metals (Cd, Cu, Ni, Pb, Zn, and Fe) in intertidal surface sediments of this area. Surface sediment samples were collected based on four different anthropogenic sources. Metals concentrations were analyzed using an atomic absorption spectrophotometer (AAS). Results revealed that the mean concentrations were Zn (1023.68 ± 762.93 μg/g), Pb (78.8 ± 49.61 μg/g), Cu (46.89 ± 43.79 μg/g), Ni (35.54 ± 10.75 μg/g), Cd (0.94 ± 0.29 μg/g), and Fe (7.14 ± 0.94%). Most of the mean values of analyzed metals were below both the interim sediment quality guidelines (ISQG-low and ISQG-high), except for Pb concentration (above ISQG-low) and Zn concentration (above ISQG-high), thus suggesting that Pb and Zn may pose some environmental concern. Cadmium, Pb, and Zn concentrations were above the threshold effect level (TEL), indicating seldom adverse effect of these metals on macrobenthic organisms. Pollution load index (PLI) indicated deterioration and other indices revealed the intertidal surface sediment is moderately polluted with Cd, Pb, and Zn. Therefore, this mangrove area requires urgent attention to mitigate further contamination. Finally, this study will contribute to data sources for Malaysia in establishing her own ISQG since it is a baseline study with detailed contamination assessment indices for surface sediment of intertidal mangrove area.

  10. Concentration of metallothionein in the liver of chicken which were given cadmium (Cd into their feed

    Directory of Open Access Journals (Sweden)

    Darmono

    2000-12-01

    Full Text Available Metallothionein is a metal-binding protein which always detected in the liver of chicken, especially essential element binding protein such as Zn-thionein. Zinc binding protein is usually used for enzyme activity in normal physiology of the animal. The aim of this study was to detect the effect of Cd given into feed on Zn-thionein contain in the liver of broiler chicken. Forty-five broiler chicken were divided into three groups, which was 15 animals in each group. Group 1 as a control group, Group 2 was given 100 mgCd/kg of feed, and group 3 was given 200 mgCd/kg of feed respectively. Body weight of five chicken per group were measured every day and liver samples of five animals per group were collected at day 7 , 14 and 21 after treatment respectively for analysis of Cd and Zn total concentrations and Cd and Zn binding protein. The result indicated that body weight of chicken in the treatment groups were lower than the control group. Zinc binding protein was highest in the control group after 21 days of treatment (2.35 ug/g, but it was low in the two treatment groups were 1.30 and 0.64 ug/g respectively, in which Cd-thionein was formed. On the other hand total Zn concentration were almost similar between treatment, 20.95 ug/g for the control group and 21.24 ug/g for group 2, and 25.37 ug/g for group 3 respectively (P>0.05. It can be concluded that Cd contamination in feed can cause decreased of Zn-thionein within 21 days of treatment, causing retardation of the animals.

  11. Cadmium Telluride Solar Cells with PEDOT:PSS Back Contact

    Science.gov (United States)

    Mount, Michael; Duarte, Fernanda; Paudel, Naba; Yan, Yanfa; Wang, Weining

    Cadmium Telluride (CdTe) solar cell is one of the most promising thin film solar cells and its highest efficiency has reached 21%. To keep improving the efficiency of CdTe solar cells, a few issues need to be addressed, one of which is the back contact. The back contact of CdTe solar cells are mostly Cu-base, and the problem with Cu-based back contact is that Cu diffuses into the grain boundary and into the CdS/CdTe junction, causing degradation problem at high temperature and under illumination. To continue improving the efficiency of CdTe/CdS solar cells, a good ohmic back contact with high work function and long term stability is needed. In this work, we report our studies on the potential of conducting polymer being used as the back contact of CdTe/CdS solar cells. Conducting polymers are good candidates because they have high work functions and high conductivities, are easy to process, and cost less, meeting all the requirements of a good ohmic back contact for CdTe. In our studies, we used poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) with different conductivities and compared them with traditional Cu-based back contact. It was observed that the CdTe solar cell performance improves as the conductivity of the PEDOT:PSS increase, and the efficiency (9.1%) is approaching those with traditional Cu/Au back contact (12.5%). Cadmium Telluride Solar Cells with PEDOT:PSS Back Contact.

  12. Physiological responses of Matricaria chamomilla to cadmium and copper excess.

    Science.gov (United States)

    Kovácik, Jozef; Backor, Martin; Kaduková, Jana

    2008-02-01

    Physiological responses of Matricaria chamomilla plants exposed to cadmium (Cd) and copper (Cu) excess (3, 60, and 120 microM for 7 days) with special emphasis on phenolic metabolism were studied. Cu at 120 microM reduced chamomile growth, especially in the roots where it was more abundant than Cd. Notwithstanding the low leaf Cu amount (37.5 microg g(-1) DW) in comparison with Cd (237.8 microg g(-1) DW) at 120 microM, it caused reduction of biomass accumulation, F(v)/F(m) ratio and soluble proteins. In combination with high accumulation of phenolics, strong reduction of proteins and high GPX activity in the roots, this supports severe redox Cu properties. In terms of leaf phenylalanine ammonia-lyase (PAL) activity, it seems that Cd had a stimulatory effect during the course of the experiment, whereas Cu was found to stimulate it after 7-day exposure. The opposite trend was visible in the roots, where Cd had a stimulatory effect at high doses but Cu mainly at the highest dose. This supports the assumption of different PAL time dynamics under Cd and Cu excess. A dose of 60 and 120 microM Cu led to 2- and 3-times higher root lignin accumulation while the same Cd doses increased it by 33 and 68%, respectively. A Cu dose of 120 microM can be considered as limiting for chamomile growth under conditions of present research, while resistance to high Cd doses was confirmed. However, PAL and phenolics seemed to play an important role in detoxification of Cd- and Cu-induced oxidative stress.

  13. Pb, Cu and Cd distribution in five estuary systems of Marche, central Italy.

    Science.gov (United States)

    Annibaldi, Anna; Illuminati, Silvia; Truzzi, Cristina; Libani, Giulia; Scarponi, Giuseppe

    2015-07-15

    Heavy metals are subjected to monitoring in estuarine and marine water by the European Union Water Framework Directive, which requires water body health to be achieved by 2021. This is the first survey of heavy metals content in five estuaries of Marche, a region in central Italy. Results showed that total Pb and Cu concentrations decreased by 70-80%, from 1000-2000 to 100-200 ng L(-1) (Pb) and from 2000-3000 to 500-1000 ng L(-1) (Cu) from river to sea. Cd was consistently 20-40 ng L(-1). Dissolved Pb and Cu concentrations declined by 50% and 70% respectively passing from oligohaline to euhaline water, from 150 to 70 ng L(-1) and from 2000-1000 to 600-400 ng L(-1). Cd decreased slightly from ∼20 to ∼10 ng L(-1). Although such concentrations are in the range allowed by the Water Framework Directive, they far exceed (up to 10×) the ground content ceiling set for 2021. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Isotherm studies for the determination of Cd (II) ions removal capacity in living biomass of a microalga with high tolerance to cadmium toxicity.

    Science.gov (United States)

    Torres, Enrique; Mera, Roi; Herrero, Concepción; Abalde, Julio

    2014-11-01

    The biosorption characteristics of Cd (II) ions using the living biomass of the marine diatom Phaeodactylum tricornutum were investigated. This microalga is a highly tolerant species to cadmium toxicity; for this reason, it is interesting to know its potential for use in the removal of this metal. The use of living biomass offers better possibilities than that of dead biomass since cadmium can also be bioaccumulated inside the cells. For this purpose, tolerant species are necessary. P. tricornutum is within this category with an EC50,96h of 19.1 ± 3.5 mg Cd (II)/L, and in the present manuscript, it is demonstrated that this microalga has a very good potential for bioremediation of Cd (II) ions in saline habitats. Cadmium removed by the cells was divided into three fractions: total, intracellular and bioadsorbed. The experiments were conducted for 96 h in natural seawater with a concentration range of 1-100 mg Cd (II)/L. Each fraction was characterized every 24 h by sorption isotherms. The experimental isotherm data were analyzed using the Langmuir, Freundlich, Dubinin-Radushkevich and Temkin equations. The biosorption was well described by Langmuir isotherm followed by Freundlich. The worst model was Temkin. The biosorption capacity of this microalga for Cd (II) ions was found to be 67.1 ± 3.2 mg/g after 96 h with approximately 40 % of this capacity in the intracellular fraction. The bioconcentration factor determined was 2,204.7 after 96 h and with an initial Cd (II) concentration of 1 mg/L.

  15. Selective separation of Cu (II), Zn (II), and Cd (II) by solvent extraction

    Institute of Scientific and Technical Information of China (English)

    XIE Keng; WEN Jiankang; HUA Yixin; RUAN Renman

    2008-01-01

    An experimental investigation was presented on the separation of Cu (II), Zn (II), and Cd (II) from a rich sulfate leachate of zinc slag by solvent extraction. The results of orthogonal experiments indicate that LIX 984N is highly selective and very efficient in the extraction of Cu (II), and the analysis of variance indicates that the sequence of parameters according to their influence on the separation efficiency is phase ratio>LIX 984N concentration>pH value>extraction time. The optimal condition for copper extraction is obtained as 25% of LIX 984N concentration, 7 min of extraction time, 3:2 of phase ratio O/A, and pH=1.7. The separation of Zn (II) and Cd (II) was performed after the copper extraction from the raffinate. Comparative analysis of the separation with di-2-ethylhexyl phosphoric acid (D2EHPA), D2EHPA-tributyl-phosophate (TBP) synergistic extracting system, and 2-ethylhexyl phosphonic acid mono 2-ethylhexyl ester (HEHEHP) was made at pH=2.0. It is demonstrated that the extraction efficiency with D2EHPA is improved after being saponified by sodium hydroxide, and D2EHPA-TBP synergistic extracting, as well as HEHEHP, has a superior selectivity to Zn (II) over Cd (II).

  16. Transcriptional up-regulation of genes involved in photosynthesis of the Zn/Cd hyperaccumulator Sedum alfredii in response to zinc and cadmium.

    Science.gov (United States)

    Tang, Lu; Yao, Aijun; Ming Yuan; Tang, Yetao; Liu, Jian; Liu, Xi; Qiu, Rongliang

    2016-12-01

    Zinc (Zn) and cadmium (Cd) are two closely related chemical elements with very different biological roles in photosynthesis. Zinc plays unique biochemical functions in photosynthesis. Previous studies suggested that in some Zn/Cd hyperaccumulators, many steps in photosynthesis may be Cd tolerant or even Cd stimulated. Using RNA-seq data, we found not only that Cd and Zn both up-regulated the CA1 gene, which encodes a β class carbonic anhydrase (CA) in chloroplasts, but that a large number of other Zn up-regulated genes in the photosynthetic pathway were also significantly up-regulated by Cd in leaves of the Zn/Cd hyperaccumulator Sedum alfredii. These genes also include chloroplast genes involved in transcription and translation (rps18 and rps14), electron transport and ATP synthesis (atpF and ccsA), Photosystem II (PSBI, PSBM, PSBK, PSBZ/YCF9, PSBO-1, PSBQ, LHCB1.1, LHCB1.4, LHCB2.1, LHCB4.3 and LHCB6) and Photosystem I (PSAE-1, PSAF, PSAH2, LHCA1 and LHCA4). Cadmium and Zn also up-regulated the VAR1 gene, which encodes the ATP-dependent zinc metalloprotease FTSH 5 (a member of the FtsH family), and the DAG gene, which influences chloroplast differentiation and plastid development, and the CP29 gene, which supports RNA processing in chloroplasts and has a potential role in signal-dependent co-regulation of chloroplast genes. Further morphological parameters (dry biomass, cross-sectional thickness, chloroplast size, chlorophyll content) and chlorophyll fluorescence parameters confirmed that leaf photosynthesis of S. alfredii responded to Cd much as it did to Zn, which will contribute to our understanding of the positive effects of Zn and Cd on growth of this plant.

  17. Evaluation of Cd, Cr, Cu, Ni, and Pb in selected cosmetic products from Jordanian, Sudanese, and Syrian markets.

    Science.gov (United States)

    Massadeh, A M; El-Khateeb, M Y; Ibrahim, S M

    2017-08-01

    There is no sufficient data that evaluate heavy metal content in cosmetic products in Jordan as well as Sudan and Syria. This study aims to assess metal levels which include Cadmium (Cd), Chromium (Cr), Copper (Cu), Nickel (Ni), and Lead (Pb) in cosmetic products. These elements have draft limits because they are identified as potential impurities and are known to be toxic. This study aims to provide information to the population that may be beneficial to public health. Samples were collected from different brands obtained from markets in Jordan, Sudan, and Syria. Some of the selected cosmetic products were eyeliner, eye pencil, mascara, lipstick, powder, face cream, body cream, sun block, Vaseline, and the traditional eye cosmetic (kohl). The heavy metal content in these samples were determined by atomic absorption spectrometry (AAS). Based on analysis of variance analysis, a significant difference in heavy metal levels was found for samples obtained from Jordanian and Sudanese markets. The acid digestion method used in this study was based on procedures recommended by Nnorom et al. with some modifications as follows. (i) A weight of 2.0 g of cosmetic sample was dissolved in a mixture of 6 mL of high quality concentrated 69% nitric acid (HNO3; Merck, Darmstadt, Germany) and 4 mL of concentrated 37% hydrochloric acid (Scharlau, Spain) in a porcelain crucible and heated on a hotplate to near dryness. (ii) An aliquot of 15 mL HNO3 (1.00 M) was added to the digested sample and filtered through a Whatman No. 40 filter paper. (iii) The digested sample was transferred quantitatively into a 25 mL volumetric flask and then diluted with deionized water. (iv) Each digested sample was evaporated at 70 °C to about 1 mL and transferred into a polyethylene flask and diluted with 25 mL deionized water. (v) Blank was treated in the same procedure. In Jordan the concentration ranges of heavy metals in the collected samples were: Cd (0.03-0.10 μg/g), Cr (0.0-1.00

  18. RELATIONSHIPS BETWEEN FRACTIONATIONS OF Pb, Cd, Cu, Zn AND Ni AND SOIL PROPERTIES IN URBAN SOILS OF CHANGCHUN, CHINA

    Institute of Scientific and Technical Information of China (English)

    GUO Ping; XIE Zhong-lei; LI Jun; KANG Chun-li; LIU Jian-hua

    2005-01-01

    An extensive soil investigation was conducted in different domains of Changchun to disclose the fractionations of Pb, Cu, Cd, Zn and Ni in urban soils. Meanwhile correlation analysis and multiple stepwise regressions were used to define relationships between soil properties and metal fractions and the chief factors influencingthe fractionation of heavy metals in the soils. The results showed that Pb, Ni and Cu were mainly associated with the residual and organic forms; most of Cd was concentrated in the residual and exchangeable fractions. Zn in residual and carbonate fraction was the highest. The activities of the heavy metals probably declined in the following order: Cd, Zn,Pb, CuandNi. The chemical fractions of heavy metals in different domains in Changchun City were of significantly spatial heterogeneity. Soil properties had different influences on the chemical fractions of heavy metals to some extent and the main factors influencing Cd, Zn, Pb, Cu and Ni fractionation and transformation were apparently different.

  19. Sputtered CdTe thin film solar cells with Cu{sub 2}Te/Au back contact

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yongseob [Department of Photoelectronics Information, Chosun College of Science and Technology, Pilmudaero 309-1, Dong-gu, Gwangju 501-744 (Korea, Republic of); Lee, Suho; Yi, Junsin; Choi, Byung-Duck [School of Electronic and Electrical Engineering, Sungkyunkwan University, Cheoncheon-dong 300, Jangan-gu, Suwon 440-746 (Korea, Republic of); Kim, Doyoung [School of Electricity and Electronics, Ulsan College, Daehak-ro 57, Nam-gu, Ulsan 680-749 (Korea, Republic of); Lee, Jaehyeong, E-mail: jaehyeong@skku.edu [School of Electronic and Electrical Engineering, Sungkyunkwan University, Cheoncheon-dong 300, Jangan-gu, Suwon 440-746 (Korea, Republic of)

    2013-11-01

    In this work, Cu{sub 2}Te/Au back contact for CdTe thin film solar cells were prepared by vacuum evaporation. Influence of annealing temperature on the structure and electrical properties of Cu{sub 2}Te films were investigated by field emission scanning electron microscope, X-ray diffraction, and Hall effect measurement. Also, CdS/CdTe thin film solar cells were fabricated by magnetron sputtering process, which is favorable for large area deposition and mass production, and the photovoltaic characteristics were studied. As the annealing temperature was increased, the crystal structure transformed from Cu{sub 2}Te for as-deposited film to Cu{sub 2−x}Te hexagonal phase, and the grains in the film became bigger. The electrical resistivity was slightly higher by the annealing. The cell efficiency was significantly improved by the heat treatment, and showed a maximum value of 9.14% at 180 °C. From these results, Cu{sub 2}Te/Au contact acts as the proper pseudo-ohmic contact onto CdTe film. However, further increase of annealing temperature caused the deterioration of cell performance. - Highlights: • Annealing effects of the vacuum evaporated Cu{sub 2}Te films were investigated. • The transformation from Cu{sub 2}Te to Cu{sub 2−x}Te hexagonal phase occurred by annealing. • The performance of the solar cell was highly increased by annealing at 180 °C. • Cu{sub 2}Te/Au contact acts as the proper pseudo-ohmic contact onto CdTe film.

  20. Preparation of Cd(Zn)Te and CuInSe sub 2 films and devices by a two-stage process

    Energy Technology Data Exchange (ETDEWEB)

    Basol, B.M.; Kapur, V.K. (International Solar Electric Technology (ISET), Inglewood, CA (USA))

    1991-05-01

    The two-stage process was used to prepare thin films of Cd(Zn)Te and CuInSe{sub 2}. The technique involves first depositing the elemental components of the compound onto a substrate in the form of thin stacked layers and then reacting these elemental components to obtain a thin film of the desired compound. While CdTe films grown on thin CdS layers have uniform stoichiometries and sharp interfaces with the underlying CdS layers, CdZnTe films deposited onto similar substrates give rise to diffused CdZnTe-CdS interfaces because of the reactive nature of zinc. In CuInSe{sub 2} processing, the nature of the reacted compound film strongly depends on the nature of the Cu-In layers. CdS/CuInSe{sub 2} device efficiencies are also influenced by the method of deposition for the CdS window layers. (orig.).

  1. Properties of interfaces in (CdZn)S/CuInSe2 heterojunctions

    Science.gov (United States)

    Kazmerski, L. L.; Ahrenkiel, R. K.; Matson, R. J.; Massopust, T. P.; Dick, J. R.; Osterwald, C. R.; Ireland, P. J.; Jones, K. M.

    1984-06-01

    The efficiency and operational characteristics of the (CdZn)S/CuInSe2 heterojunction solar cell are significantly improved as a result of a postfabrication heat treatment in an oxygen containing environment. The effects of this critical annealing process on the microchemical and microelectrical properties of the various cell layers and interfaces are investigated. Time-resolved EBIC and laser scanning techniques are correlated with cell performance data to identify two separate mechanisms that affect cell response. High resolution SIMS is used to evaluate compositional changes and interdiffusion effects, showing that penetration of the Cu-ternary layer by the oxygen is minimal. Light and dark current-voltage characteristics and diagnostic spectral response data are used to explain changes in cell operation.

  2. Heat-treatment studies on thin-film CdS/Cu/x/S solar cells

    Science.gov (United States)

    Hmurcik, L.; Serway, R. A.

    1982-12-01

    CdS/CuS polycrystalline solar cells were heat treated in different mixtures of hydrogen and oxygen and examined for the resultant I-V curves. Ten cells were studied, six which were heat treated, then kept in storage for one year. Monitoring was also carried out on the short-circuit current density, the open circuit voltage, the fill factor, and the cell efficiency. Several episodes of heat treatment were performed, with measurements carried out after each. It was determined that changes in the copper-sulfide stoichiometry were the cause of changes in the short-circuit current. Monitoring the changes in the short-circuit current during heating in a hydrogen atmosphere permitted optimization of the cell efficiency to within 5% of its theoretical value. The hydrogen-atmosphere heating is noted to increase the CuS layer stoichiometry.

  3. ASSESSMENT OF Pb, Cd, Cu AND Zn AVAILABILITY FOR PLANTS IN BAIA MARE MINING REGION

    Directory of Open Access Journals (Sweden)

    LEVEI ERIKA-ANDREA

    2010-12-01

    Full Text Available In order to evaluate the mobility of heavy metals in soil from Baia Mare mining region, the total, water and DTPA extractable metal contents were determined. The results showed that despite the high total metals contents and the high percentages of plant available metals only a low percent was water soluble, indicating a potential accumulation of metals in trophic chain and a potential risk for public health. Among the investigated metals, the plant available Pb and Cd species are the most severe contaminants. Significant correlations between total and DTPA extractable metals were found for Cu (r=0.510 and Pb (0.418, and also an affinity between total and water extractable metals were identified for Cu (0.366, Pb (0.502 and Zn (0.597.

  4. Cu2+、Cd2+和Cr6+对孔雀鱼的单一与联合毒性效应%Single and joint toxicity of Cu2+,Cd2+ and Cr6+ on Poecilia reticulata

    Institute of Scientific and Technical Information of China (English)

    赵岩; 孔强; 付荣恕

    2009-01-01

    采用静水生物测试法研究了Cu、Cd和Cr等重金属对孔雀鱼的单一与联合毒性效应.单一毒性试验结果表明:暴露时间为24,48,72和96 h时,Cu2+对孔雀鱼的LC50分别为5.70,4.02,2.95和2.36 mg/L,Cd2+对孔雀鱼的LC50分别为23.24,20.15,18.07和17.71 mg/L,Cr6+对孔雀鱼的LC50分别为88.56,65.21,47.81和43.40 mg/L.3种重金属离子对孔雀鱼均为高毒性,毒性大小为Cu2+>Cd2+>Cr6+.联合毒性试验表明:当浓度比为1:1或1:1:1,Cu2+与Cd2+、Cu2+与Cr6+、Cd2+与Cr6+以及Cu2+、Cd2+与Cr6+共存时的联合毒性均为毒性增强的协同作用.

  5. The heavy metal ions (Cu2+, Zn2+, Cd+) toxic compounds influence on triticale plants growth

    Science.gov (United States)

    Brezoczki, V. M.; Filip, G. M.

    2017-05-01

    The presence of the heavy metals toxic compounds (CuSO4 · 5H2O, ZnSO4 · 7H2O and 3CdSO4·8H2O) in water and soil can be observed by their negative effects on the germination and growth process for different vegetable (barley, oat, maize) who are used for human and animal consumption. This paper it aims the determination of germination and growth inhibition negative effects for triticale plants in the heavy metals ions presence by ecotoxicological laboratory tests. The triticale plants was chosen for their different characteristics to the other grasses respectively: a very good resistance for a wide range of diseases, an accelerated growth and a very good tolerance for aluminum ions presents in acid soils. The determinations were conducted step by step, first, we put the triticale grains in contact with the heavy metal solutions with different concentration then for 3 days we noticed the triticale germination inhibition effects and finally we noticed the growth inhibition process for triticale plants respectively in 7th and 9th day from the start of the experiment. At the end of the tests we can conclude that the triticale roots have a very great sensibility to a CuSO4 solutions compared to the effects for their stalks. A positive effect for triticale stalks we can see for low CuSO4 solution concentrations thus for 5 mg Cu/l the growth is 19,44%. A positive effect for triticale roots it can see for low ZnSO4 solution concentrations so for 5 - 15 mg Zn/l the growth is 24,4%. In the presence of the CdSO4 solution all the processes are inhibited (germination and growth for triticale plants) even for a low concentrations for this toxic.

  6. Deep level transient spectroscopy investigation of deep levels in CdS/CdTe thin film solar cells with Te:Cu back contact

    Science.gov (United States)

    Wang, Zhao; Li, Bing; Zheng, Xu; Xie, Jing; Huang, Zheng; Liu, Cai; Feng, Liang-Huan; Zheng, Jia-Gui

    2010-02-01

    Deep levels in Cds/CdTe thin film solar cells have a potent influence on the electrical property of these devices. As an essential layer in the solar cell device structure, back contact is believed to induce some deep defects in the CdTe thin film. With the help of deep level transient spectroscopy (DLTS), we study the deep levels in CdS/CdTe thin film solar cells with Te:Cu back contact. One hole trap and one electron trap are observed. The hole trap H1, localized at Ev + 0.128 eV, originates from the vacancy of Cd (VCd). The electron trap E1, found at Ec -0.178 eV, is considered to be correlated with the interstitial Cuj+ in CdTe.

  7. Solar excitation of CdS/Cu2S photovoltaic cells

    Science.gov (United States)

    Boer, K. W.

    1976-01-01

    Solar radiation of five typical clear weather days and under a variety of conditions is used to determine the spectral distribution of the photonflux at different planes of a CdS/Cu2S solar cell. The fractions of reflected and absorbed flux are determined at each of the relevant interfaces and active volume elements of the solar cell. The density of absorbed photons is given in respect to spectral and spatial distribution. The variance of the obtained distribution, with changes in insolation and absorption spectra of the active solar cell layers, is indicated. A catalog of typical examples is given in the appendix.

  8. Thin film heterojunction CdS/Cu ternary alloys solar cells with minority carrier mirrors

    Science.gov (United States)

    Kwietniak, M.; Loferski, J. J.; Beaulieu, R.; Arya, R. R.; Vera, E.; Kazmerski, L.

    A new concept in the fabrication of thin film solar cells with a multilayer structure in which the base region contains a minority carrier mirror (MCM) is reported. The theory of heterojunctions employing CdS as a wide bandgap window and layers of CulnSe2 and CuGaSe(0.9)Te(1.1) with MCM as the photovoltaically active semiconductor is presented. A first cell of this type was made by rf-sputtering the successive layers; its AM1 efficiency was about 4 percent.

  9. Evaluation of Integrated Time-Temperature Effect in Pyrolysis Process of Historically Contaminated Soils with Cadmium (Cd and Lead (Pb

    Directory of Open Access Journals (Sweden)

    Bulmău C

    2013-04-01

    Full Text Available It is already known that heavy metals pollution causes important concern to human and ecosystem health. Heavy metals in soils at the European level represents 37.3% between main contaminates affecting soils (EEA, 2007. This paper illustrates results obtained in the framework of laboratory experiments concerning the evaluation of integrated time-temperature effect in pyrolysis process applied to contaminated soil by two different ways: it is about heavy metals historically contaminated soil from one of the most polluted areas within Romania, and artificially contaminated with PCB-containing transformer oil. In particular, the authors focused on a recent evaluation of pyrolysis efficiency on removing lead (Pb and cadmium (Cd from the contaminated soil. The experimental study evaluated two important parameters related to the studied remediation methodology: thermal process temperature and the retention time in reactor of the contaminated soils. The remediation treatments were performed in a rotary kiln reactor, taking into account three process temperatures (400°C, 600°C and 800°C and two retention times: 30 min. and 60 min. Completed analyses have focused on pyrolysis solids and gas products. Consequently, both ash and gas obtained after pyrolysis process were subjected to chemical analyses.

  10. Advanced Processing of CdTe- and CuInxGa1-xSe2-Based Solar Cells: Final Report: 18 April 1995 - 31 May 1998

    Energy Technology Data Exchange (ETDEWEB)

    Morel, D. L.; Ferekides, C. S.; Bhatt, R.; Jayapalan, A.; Komin, V.; Lin, H.; Marinskiy, D.; Marinskaya, S.; Narayanaswamy, R.; Poosarla, U; Prabhakaran, R.; Sankaranarayanan, H.; Tetali, B.; Viswanathan, V.; Zafar, S. (Department of Electrical Engineering: The University of South Florida: Tampa, Florida)

    1999-01-13

    This report summarizes work performed by the University of South Florida Department of Electrical Engineering under this subcontract. The Cadmium telluride(CdTe) portion of this project deals with the development of high-efficiency thin-filmed CdTe solar cells using fabrication techniques that are suitable for manufacturing environments.

  11. Model optimization of cadmium and accumulation in switchgrass (Panicum virgatum L.): potential use for ecological phytoremediation in Cd-contaminated soils.

    Science.gov (United States)

    Wang, Quanzhen; Gu, Muyu; Ma, Xiaomin; Zhang, Hongjuan; Wang, Yafang; Cui, Jian; Gao, Wei; Gui, Jing

    2015-11-01

    Soil pollution with heavy metals is an increasingly serious threat to the environment, food security, and human health. Therefore, it is urgent to develop economic and highly efficient soil restoration technology for environmental improvement; phytoremediation is an option that is safe, has low cost, and is environmentally friendly. However, in selecting hyperaccumulators or tolerant plants, theories and operation technologies for optimal restoration should be satisfied. In this study, the switchgrass growth response and performance of phytoextraction under the coupling effect of Cd and pH were investigated by evaluating seed germination, seedling growth, and the Cd content in the plant to evaluate the potential use of switchgrass as a phytoremediation plant in cadmium contaminated soil. This study conducted three sets of independent experiments with five levels of Cd concentrations, including two orthogonal matrix designs of combining Cd with pH values. The results showed that switchgrass was germinated well under all treatments (Cd concentration of 0-500 μM), but the seedling growth was significantly affected by Cd and pH, as shown by multivariate regression analyses. Hormesis was found during the growth of switchgrass plants exposed to low Cd concentrations under hydroponic conditions, and switchgrass plants were capable of developing with a Cd concentration of 100-175 μM and pH of 4.1-5.9. Mild acidic conditions can enhance the ability of Cd to accumulate in switchgrass. Switchgrass was moderately tolerant to Cd and may be used as a phytoremediation plant for Cd-contaminated soils in the future. Our results also suggest that hormetic effects should be taken into consideration in the phytoremediation of Cd-contaminated soils. We discuss the physiological and biochemical mechanisms contributing to the effective application of the plant for the phytoremediation of Cd-contaminated soils.

  12. ``CuInSe2 and CdTe thin films for photovoltaic applications''

    Science.gov (United States)

    Attar, G.; Bhethanobolta, D. P.; Dugan, K.; Karthikeyan, S.; Kazi, M.; Killian, J. L.; Muthaiah, A. B.; Nierman, D.; Oman, D. M.; Swaminathan, R.; Zafar, S. A.; Ferekides, C. S.; Morel, D. L.

    1994-06-01

    We are developing processing techniques for CuInSe2 that are manufacturing-friendly due to relaxed controls on deposition conditions. We routinely achieve Jsc's in the range 35-45+ mA/cm2, FF's of 0.55-0.63, and have recently achieved 410 mV in devices without advanced Ga alloying techniques. Our progress and analysis suggests that these processing techniques can achieve state-of-the-art efficiencies. We are also developing an understanding of the complex underlying device mechanisms and their correlation to processing. We propose that a multi-junction classical model which includes space charge recombination can adequately explain device performance and help guide development efforts. The effect of the substrate temperature on the performance of CdTe solar cells prepared by the close spaced sublimation (CSS) process is being investigated. Significant progress has been made and the maximum open-circuit voltage, short-circuit current, and fill factor obtained are 840-860 mV, 22+ mA/cm2, and 69-70% respectively. The extend of interface reaction between the CdTe and CdS layers appears to be dependent on the substrate temperature. Other process parameters such as the total pressure and spacing are of equal importance in obtaining dense CdTe films. Stability studies are also underway in order to determine whether any degradation mechanisms exist and identify their origins.

  13. Removal of Cd, Cu, Pb, and Zn from aqueous solutions by biochars.

    Science.gov (United States)

    Doumer, M E; Rigol, A; Vidal, M; Mangrich, A S

    2016-02-01

    Sorption and desorption of heavy metals (Cd, Cu, Pb, and Zn) was evaluated in biochars derived from sugarcane bagasse (SB), eucalyptus forest residues (CE), castor meal (CM), green coconut pericarp (PC), and water hyacinth (WH) as candidate materials for the treatment of contaminated waters and soils. Solid-liquid distribution coefficients depended strongly on the initial metal concentration, with K d,max values mostly within the range 10(3)-10(4) L kg(-1). For all biochars, up to 95 % removal of all the target metals from water was achieved. The WH biochar showed the highest K d,max values for all the metals, especially Cd and Zn, followed by CE (for Cd and Pb) and PC (for Cd, Pb, and Zn). Sorption data were fitted satisfactorily with Freundlich and linear models (in the latter case, for the low concentration range). The sorption appeared to be controlled by cationic exchange, together with specific surface complexation at low metal concentrations. The low desorption yields, generally less than 5 %, confirmed that the sorption process was largely irreversible and that the biochars could potentially be used in decontamination applications.

  14. Physiological responses and detoxific mechanisms to Pb, Zn, Cu and Cd in young seedlings of Paulownia fortunei.

    Science.gov (United States)

    Wang, Jiang; Li, Weihua; Zhang, Chongbang; Ke, Shisheng

    2010-01-01

    Paulownia fortunei has been successfully used in the phytoremediation of many Pb/Zn mine tailings. However, seed germination and young seedlings of P. fortunei rarely occurred in these mine tailings. The physiological responses and detoxific mechanisms of P. fortunei young seedling to Pb, Zn, Cu and Cd stress were investigated. The germinated rate, shoot length, chlorophyll and carotenoid contents in leaves of young seedlings had a great reduction under Zn and Cu treatments, but had little decrease under Pb and Cd treatments. The production rate of O2*-, H2O2 and malondialdehyde (MDA) contents significantly increased in response to added Zn and Cu indicating great oxidative stress for young seedlings, but they had no significant change to added Pb and Cd. Young seedlings had effective detoxific mechanism to Pb and Cd, as antioxidant enzymes activities, phytochelatins (PCs-SH) and proline contents increased with increasing rates of added Pb and Cd. However, young seedlings had un-effective detoxific mechanisms to Zn and Cu stress. Results revealed the heavy metals (such as Cu) that present at low concentrations in mine tailings may be major constraint for the survival of young seedlings.

  15. Purification of cadmium up to 5N+ by vacuum distillation

    Indian Academy of Sciences (India)

    S T Ali; J V Rao; K S Varma; T L Prakash

    2002-11-01

    Cadmium was refined by vacuum distillation, a technique suitable for low boiling and melting point materials, to remove the heavy and low vapour pressure impurities at ppm level. The detailed analysis of the purified Cd as well as raw Cd was done by ICP–OES techniques for 27 impurity elements. Purification was carried out in an efficient high-yield vacuum distillation system designed and fabricated for purifying 3N+ purity indigenous cadmium to 5N+ (99.999%). Analysis confirmed the reduction of total impurity content from 134 ppm (3N7) for raw Cd to 3 ppm (5N7) upon vacuum distilled Cd. The present study shows that the analysis of impurities such as Fe, Mg and Ca are contributed from environmental effect, whereas impurities such as Pb, Bi, Ag, Ni, Cu, Zn and Tl require adaptation of elemental analysing technique to counter dilution effect. The Hg trace analysis can however be carried out by hydride generation techniques.

  16. Synthesis, Characterization and in Vitro Antibacterial Activities of CdO Nanoparticle and Nano-sheet Mixed-ligand of Cadmium(ІІ Complex

    Directory of Open Access Journals (Sweden)

    Zohreh Rashidi Ranjbar

    2016-07-01

    Full Text Available Here, we report the synthesis of a Schiff-base mixed-ligand complex of cadmium(ІІ in bulk and nano-scales via the precipitation and sonochemical methods, respectively. The complex formula is [Cd(3-bpdh(3-bpdbCl2]n (1, where the ligands are 3-bpdh = 2,5-bis(3-pyridyl-3,4-diaza-2,4-hexadiene and 3-bpdb = 1,4-bis(3-pyridyl-2,3-diaza-1,3-butadiene. The structure of mixed-ligand complex (1 was characterized by IR, 1H NMR and elemental analyses. Cadmium(ІІ oxide nanoparticles were prepared by direct thermolysis from nanosheet of complex (1. The cadmium(ІІ oxide structure was characterized by X-ray Diffraction (XRD and Energy Dispersive X-ray  analyses (EDAX. Size, morphology and structural dispersion of all obtained nanostructures were characterized by Scanning Electron Microscopy (SEM. The Schiff-base ligands, bulk and nano-scales of complex (1 and cadmium(ІІ oxide nanoparticles were analyzed for antibacterial activities against Bacillus alvei (bacteria causing the honey bee European foulbrood disease. The Minimum Inhibitory Concentrations (MIC has been shown moderate antibacterial activities compared with some other standard drugs. Known antibiotics like penicillin and SXT (Trimethoprim/sulfamethoxazole were used as positive control.

  17. Valorization of biosorbent obtained from a forestry waste: Competitive adsorption, desorption and transport of Cd, Cu, Ni, Pb and Zn.

    Science.gov (United States)

    Cutillas-Barreiro, Laura; Paradelo, Remigio; Igrexas-Soto, Alba; Núñez-Delgado, Avelino; Fernández-Sanjurjo, María José; Álvarez-Rodriguez, Esperanza; Garrote, Gil; Nóvoa-Muñoz, Juan Carlos; Arias-Estévez, Manuel

    2016-09-01

    Bark from Pinus pinaster is one of the most abundant forestry wastes in Europe, and among the proposed technologies for its reutilization, the removal of heavy metals from wastewater has been gaining increasing attention. In this work, we have studied the performance of pine bark for heavy metal biosorption on competitive systems. Pb, Cu, Ni, Zn and Cd sorption and desorption at equilibrium were studied in batch experiments, whereas transport was studied in column experiments. Batch experiments were performed adding simultaneously different concentrations (0.08-3.15mM) of two or more metals in solution to pine bark samples. Column experiments were performed with 10mM solutions of two metals or a 5mM solution of the five metals. In general, the results under competitive conditions were different to those obtained in monoelemental experiments. The multi-metal batch experiments showed the adsorption sequence Pb≈Cu>Cd>Zn>Ni for lower metal doses, Pb>Cu>Cd>Zn>Ni for intermediate doses, and Pb>Cu>Cd≈Zn≈Ni for high metal doses. Desorption followed the sequence PbCdCdCd, Ni and Zn from adsorption sites on pine bark. The transport experiments produced comparable results to those obtained in the batch experiments, with pine bark retention capacity following the sequence Pb>Cu>Zn>Cd>Ni. The presence of a second metal affected the transport of all the elements studied except Pb, and confirmed the strong influence of Pb and Cu on the retention of the other metals. These results can help to appropriately design decontamination systems using this forestry waste.

  18. ZnO/CdS/CuGa{sub X}In{sub 1-X}Se{sub 2} photovoltaic cells fabricated on Bridgman grown substrates

    Energy Technology Data Exchange (ETDEWEB)

    Lam, W.W.; Shih, I. [Department of Electrical Engineering, McGill University, 3480 University Street, Montreal (Canada)

    1999-01-01

    ZnO/CdS/CuInSe{sub 2} and ZnO/CdS/Cu(Ga,In)Se{sub 2} PV cells were fabricated on Bridgman grown substrates. Conversion efficiencies exceeding 10% were attained without using AR coating. By employing an improved CdS deposition process, PV cells with open circuit voltages comparable to thin films cells were obtained. The present result on a ZnO/CdS/CuGa{sub 0.45}In{sub 0.55}Se{sub 2} cell represents a significant improvement for cells fabricated on Cu(Ga,In)Se{sub 2} mixed bulk crystals

  19. Effects of zinc on cadmium uptake by spring wheat (Triticum aestivum, L.): long-time hydroponic study and short-time 109Cd tracing study

    Institute of Scientific and Technical Information of China (English)

    ZHAO Zhong-qiu; ZHU Yong-guan; CAI Yun-long

    2005-01-01

    To investigate effects of Zn on Cd uptake by spring wheat (Triticum aestivum, L.) in solution culture, long-time hydroponic experiment (1 month) (Experiment 1) and short-time Cd isotope (109Cd) tracing experiment (24 h) (Experiment 2) were conducted. In Experiment 1, spring wheat (cv. Brookton) was grown in nutrient solution at uniform cadmium concentration of 20μ mol/L and 10 zinc concentrations (0, 1, 5, 10, 20, 100, 200, 500, 1000, 2000 μ mol/L). In Experiment 2, spring wheat seedlings,pre-cultivated in complete nutrient solution, were treated with 109Cd of uniform activity and the same series of Zn concentrations as those in Experiment 1 for 24 h. Cd concentrations in shoots and roots in Experiment 1 increased marginally but not consistently with Zn increasing at Zn rates of 1~200 μmol/L, and then decreased significantly at high rates (>200 μ mol/L). In Experiment 2, the response of 109Cd activities in shoots and roots to increasing Zn was greatly similar to the response of Cd concentrations to Zn increasing in Experiment 1. The results of the two experiments indicated that the short-time and long-time exposure of spring wheat to Zn had similar effects on Cd accumulation.

  20. Cadmium telluride quantum dots (CdTe-QDs) and enhanced ultraviolet-B (UV-B) radiation trigger antioxidant enzyme metabolism and programmed cell death in wheat seedlings.

    Science.gov (United States)

    Chen, Huize; Gong, Yan; Han, Rong

    2014-01-01

    Nanoparticles (NPs) are becoming increasingly widespread in the environment. Free cadmium ions released from commonly used NPs under ultraviolet-B (UV-B) radiation are potentially toxic to living organisms. With increasing levels of UV-B radiation at the Earth's surface due to the depletion of the ozone layer, the potential additive effect of NPs and UV-B radiation on plants is of concern. In this study, we investigated the synergistic effect of CdTe quantum dots (CdTe-QDs), a common form of NP, and UV-B radiation on wheat seedlings. Graded doses of CdTe-QDs and UV-B radiation were tested, either alone or in combination, based on physical characteristics of 5-day-old seedlings. Treatments of wheat seedlings with either CdTe-QDs (200 mg/L) or UV-B radiation (10 KJ/m(2)/d) induced the activation of wheat antioxidant enzymes. CdTe-QDs accumulation in plant root cells resulted in programmed cell death as detected by DNA laddering. CdTe-QDs and UV-B radiation inhibited root and shoot growth, respectively. Additive inhibitory effects were observed in the combined treatment group. This research described the effects of UV-B and CdTe-QDs on plant growth. Furthermore, the finding that CdTe-QDs accumulate during the life cycle of plants highlights the need for sustained assessments of these interactions.

  1. Cadmium telluride quantum dots (CdTe-QDs and enhanced ultraviolet-B (UV-B radiation trigger antioxidant enzyme metabolism and programmed cell death in wheat seedlings.

    Directory of Open Access Journals (Sweden)

    Huize Chen

    Full Text Available Nanoparticles (NPs are becoming increasingly widespread in the environment. Free cadmium ions released from commonly used NPs under ultraviolet-B (UV-B radiation are potentially toxic to living organisms. With increasing levels of UV-B radiation at the Earth's surface due to the depletion of the ozone layer, the potential additive effect of NPs and UV-B radiation on plants is of concern. In this study, we investigated the synergistic effect of CdTe quantum dots (CdTe-QDs, a common form of NP, and UV-B radiation on wheat seedlings. Graded doses of CdTe-QDs and UV-B radiation were tested, either alone or in combination, based on physical characteristics of 5-day-old seedlings. Treatments of wheat seedlings with either CdTe-QDs (200 mg/L or UV-B radiation (10 KJ/m(2/d induced the activation of wheat antioxidant enzymes. CdTe-QDs accumulation in plant root cells resulted in programmed cell death as detected by DNA laddering. CdTe-QDs and UV-B radiation inhibited root and shoot growth, respectively. Additive inhibitory effects were observed in the combined treatment group. This research described the effects of UV-B and CdTe-QDs on plant growth. Furthermore, the finding that CdTe-QDs accumulate during the life cycle of plants highlights the need for sustained assessments of these interactions.

  2. Bioelectrochemical recovery of Cu, Pb, Cd, and Zn from dilute solutions.

    Science.gov (United States)

    Modin, Oskar; Wang, Xiaofei; Wu, Xue; Rauch, Sebastien; Fedje, Karin Karlfeldt

    2012-10-15

    In a microbial bioelectrochemical system (BES) living microorganisms catalyze the anodic oxidation of organic matter at a low anode potential. We used a BES with a biological anode to power the cathodic recovery of Cu, Pb, Cd, and Zn from a simulated municipal solid waste incineration ash leachate. By varying the control of the BES, the four metals could sequentially be recovered from a mixed solution by reduction on a titanium cathode. First, the cell voltage was controlled at zero, which allowed recovery of Cu from the solution without an electrical energy input. Second, the cathode potential was controlled at -0.51 V to recover Pb, which required an applied voltage of about 0.34 V. Third, the cathode potential was controlled at -0.66 V to recover Cd, which required an applied voltage of 0.51 V. Finally, Zn was the only metal remaining in solution and was recovered by controlling the anode at +0.2V to maximize the generated current. The study is the first to demonstrate that a BES can be used for cathodic recovery of metals from a mixed solution, which potentially could be used not only for ash leachates but also for e.g. metallurgical wastewaters and landfill leachates.

  3. Spatial distribution of dissolved Pb,Hg,Cd,Cu and As in the Bohai Sea

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Characteristics of the spatial distribution of selected dissolved heavy metals were analyzed during large scale surveys from August 12 to 25.2003 in the Bohai Sea.Dissolved Pb was the only element with average concentrations higher than the grade-one sea water quality standard of China.The spatial distribution of dissolved Pb in surface water was similar to those of Cd,Cu and As,where the isopleths generally indicated decreasing values from the bays to the central areas.Only for Hg did the high concentrations not only appear in Liaodong Bay,Bohai Bay and Laizhou Bay,but also in the Central Area,viz.not only in inshore but also in offshore areas.Vertical distributions of dissolved Pb,Cd,Cu and As were largely uniform,while that of dissolved Hg increased with depth.We infer that the input of pollutants from land was the main influencing factor for the detected distribution patterns of dissolved heavy metals,followed by the dynamics of sea water,release from bottom sediments and biochemical processes.Comparing with historical data,average concentrations of dissolved heavy metals appear to decline in recent years.

  4. Relative abundance of chemical forms of Cu(II) and Cd(II) on soybean roots as influenced by pH, cations and organic acids

    Science.gov (United States)

    Zhou, Qin; Liu, Zhao-Dong; Liu, Yuan; Jiang, Jun; Xu, Ren-Kou

    2016-11-01

    Little information is available on chemical forms of heavy metals on integrate plant roots. KNO3 (1 M), 0.05M EDTA at pH6 and 0.01 M HCl were used sequentially to extract the exchangeable, complexed and precipitated forms of Cu(II) and Cd(II) from soybean roots and then to investigate chemical form distribution of Cu(II) and Cd(II) on soybean roots. Cu(II) and Cd(II) adsorbed on soybean roots were mainly exchangeable form, followed by complexed form, while their precipitated forms were very low under acidic conditions. Soybean roots had a higher adsorption affinity to Cu(II) than Cd(II), leading to higher toxic of Cu(II) than Cd(II). An increase in solution pH increased negative charge on soybean and thus increased exchangeable Cu(II) and Cd(II) on the roots. Ca2+, Mg2+ and NH4+ reduced exchangeable Cu(II) and Cd(II) levels on soybean roots and these cations showed greater effects on Cd(II) than Cu(II) due to greater adsorption affinity of the roots to Cu(II) than Cd(II). L-malic and citric acids decreased exchangeable and complexed Cu(II) on soybean roots. In conclusion, Cu(II) and Cd(II) mainly existed as exchangeable and complexed forms on soybean roots. Ca2+ and Mg2+ cations and citric and L-malic acids can potentially alleviate Cu(II) and Cd(II) toxicity to plants.

  5. Dynamics of Intercalation/De-Intercalation of Rhodamine B during the Polymorphic Transformation of CdAl Layered Double Hydroxide to the Brucite-Like Cadmium Hydroxide

    KAUST Repository

    Saliba, Daniel

    2016-06-23

    Cadmium-Aluminum layered double hydroxide (CdAl LDH) is thermodynamically unstable and transforms to Cd(OH)2 and Al(OH)3 in a short period of time. We present a reaction-diffusion framework that enables us to use in situ steady-state fluorescence spectroscopy to study the kinetics of intercalation of a fluorescent probe (Rhodamine B (RhB)) during the formation of the CdAl LDH and its de-intercalation upon the conversion of the LDH phase to the β phase (Cd(OH)2). The method involves the diffusion of sodium hydroxide into a hydrogel gel matrix containing the aluminum and cadmium ions as well as the species we wish to incorporate in the interlayers of the LDH. The existence of RhB between the LDH layers and its expel during the transition into the β phase are proved via fluorescence microscopy, XRD and ssNMR. The activation energies of intercalation and de-intercalation of RhB are computed and show dependence on the cationic ratio of the corresponding LDH. We find that the energies of de- intercalation are systematically higher than those of intercalation proving that the dyes are stabilized due to the probe-brucite sheets interactions.

  6. Diverse strategies conferring extreme cadmium (Cd) tolerance in the dark septate endophyte (DSE), Exophiala pisciphila: evidence from RNA-seq data.

    Science.gov (United States)

    Zhao, Dake; Li, Tao; Shen, Mi; Wang, Junling; Zhao, Zhiwei

    2015-01-01

    Dark septate endophytes (DSE) ubiquitously colonize the roots of plants growing in extreme heavy metals (HMs)-contaminated soils. Little is known about the overall molecular response of DSE to excessive HMs. Therefore, RNA-seq was performed through Illumina Hiseq 2000 sequencing based on two cDNA libraries of the DSE strain Exophiala pisciphila, cultured under cadmium (Cd)-free and Cd-stressed conditions, and 21,376 unigenes were generated. In total, 575 differentially expressed genes (DEGs) were obtained. Approximately 40% of the DEGs (228 unigenes) were involved in 10 well-known HMs-tolerant pathways, conferring the extreme cadmium (Cd) tolerance of E. pisciphila, including metal ion binding and transportation, organic acid metabolism and transportation, reactive oxygen species (ROS) scavenging, redox homeostasis, transcription factors production, sulfate assimilation, DNA repair and cell wall integrity maintenance, etc. Our results indicate that integral tactics associated with the collaboration of extracellular and intracellular mechanisms contribute to the enhanced HMs tolerance of this fungus. This study represents the first investigation of the transcriptome of DSE under Cd stress, and our results provide valuable information for future molecular studies of HMs tolerance in fungi.

  7. Bio-active trace elements (cd, cu, fe, ni) in the oligotrophic south china sea

    Science.gov (United States)

    Wen, L.-S.; Jiann, K.-T.; Liu, K.-K.

    2003-04-01

    Bio-active trace elements (Cu, Ni, Cd, Fe) in seawater play a critical role in regulating oceanic phytoplankton growth and, hence, may influence global carbon cycle. However, their in-situ speciation and bio-reactivity are poorly understood. Dissolved copper and nickel are believed to be present in seawater predominantly as low molecular weight soluble organic complexes which are readily available to marine organism and immune from particle scavenging. Dissolved iron is believed to exist predominantly as high molecular weight colloidal species. Using ultraclean ultrafiltration and ion exchange/affinity chelating chemistry, we demonstrate that in the oligotrophic ocean waters, these four bio-active elements have distinctive characteristics of speciation and reactivity, even though they display similar nutrient-type distributions. For dissolved Cu, the concentration increased from 0.9 nM in the surface water to 3 nM at depths below 500 m; for dissolved Ni, 2˜9 nM; for dissolved Cd, 0.01˜0.9 nM; for dissolved Fe, 0.1˜0.6 nM. All four elements showed a subsurface minimum around 60 m deep, which corresponded to the subsurface Chl a maximum, indicating strong biological interactions with these elements. Detailed analysis revealed distinct size distribution and chemical reactivity for each element. For Cu, more than 50% in surface water was in smaller than 1kDa labile forms; the strongly complexed inert form increased from 28% at surface to 50% below 500 meter; the colloidal form Cu decreased from 12% at surface to a minimum of 6% at 60 meter, and then gradually increased to 16% in deeper water. For Ni, more than 80% was in smaller than 1kDa labile form, and very small fraction (˜5%) in colloidal from. For Cd, almost all dissolved fraction was in smaller than 1kDa labile form. As for Fe, its dynamic nature in water column caused by complicated bio-interactions was evident. This study indicated that, with preferential uptake of trace elements by different phytoplankton

  8. Effects of Cd+2, Cu+2, Ba+2 and Co+2 ions on Entamoeba histolytica cysts

    Institute of Scientific and Technical Information of China (English)

    Umit Aksoy; Sebnem Ustun; Hande Dagci; Suleyman Yazar

    2004-01-01

    AIM: The effects of cobalt, copper, cadmium and barium ions on the cysts of Entamoeba histolytica (E.histolytica),an amebic dysentery agent, cultured in Robinson medium were investigated.METHODS: E. histolytica cysts and trophozoites isolated from a patient with amebiasis were cultivated in the medium,incubated at 37 ℃ for a period of 4 days and 40x104/ml amebic cysts were then transferred to a fresh medium. At the second stage, 0.05, 0.1 and 0.2 mM of selected metal ions were added to the medium, and the effects of these ions on parasitic reproduction compared with the control group were observed.RESULTS: It was determined that the number of living parasites in all the groups containing metal ions decreased significantly rtarting from 30 minutes (P<0.01). CuCl2 showed the highest lethal effect on E.histolytita cysts, whereas the lowest lethal effect was observed with CoCl2. It was also seen that the number of living cells was decreased as the ion concentration and exposure time were increased, and that there were no living paasites in the medium at the end of 24 h (P<0.01).CONCLUSION: It may be stated that the effect of everincreasing contamination of the environment with metal waste materials on parasites should be investigated further.

  9. Interaction of salinity and cadmium stresses on mineral nutrients, sodium, and cadmium accumulation in four barley genotypes

    Institute of Scientific and Technical Information of China (English)

    HUANG You-zong; WEI Kang; YANG Juan; DAI Fei; ZHANG Guo-ping

    2007-01-01

    Interaction of salinity (NaCl) and cadmium (Cd) on growth, mineral nutrients, Na and Cd accumulation in four barley genotypes differing in salt tolerance was studied in a hydroponic experiment. Cd, NaCl and their combined stresses reduced Ca and Mg concentrations in roots and shoots, K concentration in shoots, increased K and Cu concentrations in roots relative to control, but had non-significant effect on micronutrients Cu, Fe and Mn concentrations in shoot. The three stresses reduced accumulation of most tested nutrients in both roots and shoots, except NaCl and NaCl+Cd stresses for root K and shoot Cu accumulation in salt tolerant genotypes. The salt tolerant genotypes did not have higher nutrient concentration and accumulation than the sensitive ones when exposed to Cd and NaCl stresses. In conclusion, the affecting mechanism of Cd stress on nutrients was to some extent different from salinity stress, and the NaCl+Cd stress was not equal to additional Cd and NaCl stresses, probably due to the different valence and competitive site of Na+ and Cd2+. NaCl addition in the Cd-containing medium caused remarkable reductions in both Cd concentration and accumulation, with the extent of reduction being also dependent on genotypes. The salt-tolerant genotypes had lower Na concentration than sensitive ones.

  10. Interaction of salinity and cadmium stresses on mineral nutrients, sodium, and cadmium accumulation in four barley genotypes.

    Science.gov (United States)

    Huang, You-zong; Wei, Kang; Yang, Juan; Dai, Fei; Zhang, Guo-ping

    2007-07-01

    Interaction of salinity (NaCl) and cadmium (Cd) on growth, mineral nutrients, Na and Cd accumulation in four barley genotypes differing in salt tolerance was studied in a hydroponic experiment. Cd, NaCl and their combined stresses reduced Ca and Mg concentrations in roots and shoots, K concentration in shoots, increased K and Cu concentrations in roots relative to control, but had non-significant effect on micronutrients Cu, Fe and Mn concentrations in shoot. The three stresses reduced accumulation of most tested nutrients in both roots and shoots, except NaCl and NaCl+Cd stresses for root K and shoot Cu accumulation in salt tolerant genotypes. The salt tolerant genotypes did not have higher nutrient concentration and accumulation than the sensitive ones when exposed to Cd and NaCl stresses. In conclusion, the affecting mechanism of Cd stress on nutrients was to some extent different from salinity stress, and the NaCl+Cd stress was not equal to additional Cd and NaCl stresses, probably due to the different valence and competitive site of Na(+) and Cd(2+). NaCl addition in the Cd-containing medium caused remarkable reductions in both Cd concentration and accumulation, with the extent of reduction being also dependent on genotypes. The salt-tolerant genotypes had lower Na concentration than sensitive ones.

  11. Synthesis and characterization of (Cd,Zn)S buffer layer for Cu2ZnSnSe4 solar cells

    Science.gov (United States)

    Ben Messaoud, Khaled; Buffière, Marie; Brammertz, Guy; Lenaers, Nick; Boyen, Hans-Gerd; Sahayaraj, Sylvester; Meuris, Marc; Amlouk, Mosbah; Poortmans, Jef

    2017-07-01

    In order to improve the electrical performances of Cu2ZnSnSe4 (CZTSe) based solar cells, the standard CdS buffer layer was replaced by (Cd,Zn)S processed by chemical bath deposition. The morphology and composition of the (Cd,Zn)S thin films were studied as a function of [Zn]/([Zn]  +  [Cd]) ratio in the chemical bath (80, 85 and 90%). The CZTSe/(Cd,Zn)S solar cells with and without Cd partial electrolyte (Cd PE) treatment were compared to CZTSe/CdS reference devices using current-voltage and external quantum efficiency measurements. The (Cd,Zn)S thin films show a non-homogeneity of Zn distribution and phase formation, with a shift from Zn(O,OH) x to ZnS phase when increasing the deposition time and a decrease of the layers thicknesses when increasing the Zn concentration in chemical bath. A model for the growth of (Cd,Zn)S thin films is proposed. The resulting CZTSe/(Cd,Zn)S devices show an important reduction of the barrier at the hetero-interface, which is attributed to the lower density of O contamination in (Cd,Zn)S compared to CdS, inducing a lower density of deep p-type recombination centers. Despite the reduced compensation of the buffer layer, CZTSe/(Cd,Zn)S devices show a deterioration of the open circuit voltage and the fill factor with the increase of Zn content in (Cd,Zn)S. These electrical losses were avoided by Cd PE treatment prior to the deposition of (Cd,Zn)S.

  12. Investigation of CdZnS Buffer Layers on the Performance of CuInGaSe2 and CuGaSe2 Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Song, J.; Li, S. S.; Chen, L.; Noufi, R.; Anderson, T. J.; Crisalle, O. D.

    2006-01-01

    Cu(In,Ga)Se{sub 2} (CIGS) and CuGaSe{sub 2} (CGS) solar cells were fabricated using Cd{sub 1-x}Zn{sub x}S (CdZnS) buffer layers prepared by chemical bath deposition (CBD) with relative Zn compositions in the CBD bath values of X{sub bath} = 0 (i.e., pure CdS), 0.1, 0.2, 0.3, 0.4, and 0.5. The cell performance parameters of CIGS and CGS films treated with a KCN solution were investigated and compared to cells without KCN treatment. It was found that absorber films treated with KCN etching prior to the buffer CBD step show an improved cell performance for both the CIGS and CGS cells deposited with either CdS or CdZnS buffer layer. A CIGS cell with CdZnS buffer layer of X{sub bath} = 0.2 produced a 13% AM1.5G conversion efficiency with higher V{sub oc}, J{sub sc}, and FF values as compared to the CdZnS/CIGS cells with different Zn contents. Results of photo- J-V and quantum efficiency (QE) measurements reveal that the CGS cell with CdZnS buffer layer of X{sub bath} = 0.3 performed better than the CGS cell deposited with a pure CdS buffer layer. This result is suggested as a result of an increased photocurrent at shorter wavelengths and a more favorable conduction band-offset at the CdZnS/CGS junction.

  13. Evaluation of low-cadmium ZnCdSeS alloyed quantum dots for remote phosphor solid-state lighting technology.

    Science.gov (United States)

    Siffalovic, Peter; Badanova, Dominika; Vojtko, Andrej; Jergel, Matej; Hodas, Martin; Pelletta, Marco; Sabol, Dusan; Macha, Marek; Majkova, Eva

    2015-08-10

    We report on the possibility to enhance color rendering of commercially available remote phosphor light-emitting diode modules by using low-cadmium content ZnCdSeS alloyed quantum dots. The employed numerical simulations showed that the color-rendering index of 90+ at the color-correlated temperature of 3200 K can be achieved by application of a single layer of quantum dots onto a neutral-white remote phosphor substrate. The experimental results fully support the numerical calculations, thus revealing the only limiting factor in achieving a higher photometric performance: the self-absorption effect in quantum dots. The presented low-cadmium content quantum dots allow a price-effective upgrade of already existing remote phosphor solid-state lighting technology toward a higher color-rendering capability.

  14. pH effects on the removal of Cu{sup 2+}, Cd{sup 2+} and Pb{sup 2+} from aqueous solution by waste brewery biomass

    Energy Technology Data Exchange (ETDEWEB)

    Marques, P.A.S.S.; Rosa, M.F. [Departamento de Energias Renovaveis, Inst. Nacional de Engenharia e Tecnologia Industrial, Lisboa (Portugal); Pinheiro, H.M. [Centro de Engenharia Biologica e Quimica, Inst. Superior Tecnico, Lisboa (Portugal)

    2000-08-01

    An industrial strain of Saccharomyces cerevisiae collected from the waste of a brewing industry was used to remove lead, cadmium and copper from aqueous solutions (1 mm).Metal removal efficiency by using either biomass suspension directly diluted into the metal solutions or biomass previously incubated and washed in distilled water was compared. In all experiments with unwashed biomass a shift in the medium pH from 4.5 to a final value in the 7.0-8.0 range occurred. This pH increase was responsible for a metal precipitation effect associated to the metal biosorption. A very different pH profile was observed when washed biomass was used leading to different removal profiles for Cd{sup 2+} and Pb{sup 2+} and a similar one for Cu{sup 2+}. In the absence of biomass, medium components and/or the excreted intracellular products proved to interfere in the metal removal and to be responsible for 80% Pb{sup 2+} precipitation, in the pH 4.5-5.0 range.To initial metal solution pH, leading to the lowest residual ion concentrations, after 96 h of contact with unwashed biomass and in the absence of pH adjustment, was 4.5-5.0. Continuous or stepwise adjustment of medium pH to this range during the process was unfavourable for metal removal, being the continuous adjustment the worst procedure. In this case, Cd{sup 2+} was not biosorbed and Cu{sup 2+} removal decreased from 76 to 33%. However, Pb{sup 2+} was always extensively removed (89%) and only slightly affected by pH control.The global results suggest different removal mechanisms for each cation. Cu{sup 2+} was removed by both metal sorption and precipitation, due to the pH shift that occurred during the process, while Cd{sup 2+} removal showed to be completely dependent of this pH shift. Pb{sup 2+} was totally and quickly removed, by precipitation, in the presence of the biomass suspension and at pH 4.5.Moreover, the biosorbent changes occurring during the process played an important role in the metal removal when non

  15. Automated preconcentration of Fe, Zn, Cu, Ni, Cd, Pb, Co, and Mn in seawater with analysis using high-resolution sector field inductively-coupled plasma mass spectrometry.

    Science.gov (United States)

    Rapp, Insa; Schlosser, Christian; Rusiecka, Dagmara; Gledhill, Martha; Achterberg, Eric P

    2017-07-11

    A rapid, automated, high-throughput analytical method capable of simultaneous analysis of multiple elements at trace and ultratrace levels is required to investigate the biogeochemical cycle of trace metals in the ocean. Here we present an analytical approach which uses a commercially available automated preconcentration device (SeaFAST) with accurate volume loading and in-line pH buffering of the sample prior to loading onto a chelating resin (WAKO) and subsequent simultaneous analysis of iron (Fe), zinc (Zn), copper (Cu), nickel (Ni), cadmium (Cd), lead (Pb), cobalt (Co) and manganese (Mn) by high-resolution inductively-coupled plasma mass spectrometry (HR-ICP-MS). Quantification of sample concentration was undertaken using isotope dilution for Fe, Zn, Cu, Ni, Cd and Pb, and standard addition for Co and Mn. The chelating resin is shown to have a high affinity for all analyzed elements, with recoveries between 83 and 100% for all elements, except Mn (60%) and Ni (48%), and showed higher recoveries for Ni, Cd, Pb, Co and Mn in direct comparison to an alternative resin (NOBIAS Chelate-PA1). The reduced recoveries for Ni and Mn using the WAKO resin did not affect the quantification accuracy. A relatively constant retention efficiency on the resin over a broad pH range (pH 5-8) was observed for the trace metals, except for Mn. Mn quantification using standard addition required accurate sample pH adjustment with optimal recoveries at pH 7.5 ± 0.3. UV digestion was necessary to increase recovery of Co and Cu in seawater by 15.6% and 11.4%, respectively, and achieved full break-down of spiked Co-containing vitamin B12 complexes. Low blank levels and detection limits could be achieved (e.g., 0.029 nmol L(-1) for Fe and 0.028 nmol L(-1) for Zn) with the use of high purity reagents. Precision and accuracy were assessed using SAFe S, D1, and D2 reference seawaters, and results were in good agreement with available consensus values. The presented method is ideal for

  16. Electronic, Magnetic, and Redox Properties of [MFe(3)S(4)] Clusters (M = Cd, Cu, Cr) in Pyrococcus furiosus Ferredoxin.

    Science.gov (United States)

    Staples, Christopher R.; Dhawan, Ish K.; Finnegan, Michael G.; Dwinell, Derek A.; Zhou, Zhi Hao; Huang, Heshu; Verhagen, Marc F. J. M.; Adams, Michael W. W.; Johnson, Michael K.

    1997-12-01

    The ground- and excited-state properties of heterometallic [CuFe(3)S(4)](2+,+), [CdFe(3)S(4)](2+,+), and [CrFe(3)S(4)](2+,+) cubane clusters assembled in Pyrococcus furiosus ferredoxin have been investigated by the combination of EPR and variable-temperature/variable-field magnetic circular dichroism (MCD) studies. The results indicate Cd(2+) incorporation into [Fe(3)S(4)](0,-) cluster fragments to yield S = 2 [CdFe(3)S(4)](2+) and S = (5)/(2) [CdFe(3)S(4)](+) clusters and Cu(+) incorporation into [Fe(3)S(4)](+,0) cluster fragments to yield S = (1)/(2) [CuFe(3)S(4)](2+) and S = 2 [CuFe(3)S(4)](+) clusters. This is the first report of the preparation of cubane type [CrFe(3)S(4)](2+,+) clusters, and the combination of EPR and MCD results indicates S = 0 and S = (3)/(2) ground states for the oxidized and reduced forms, respectively. Midpoint potentials for the [CdFe(3)S(4)](2+,+), [CrFe(3)S(4)](2+,+), and [CuFe(3)S(4)](2+,+) couples, E(m) = -470 +/- 15, -440 +/- 10, and +190 +/- 10 mV (vs NHE), respectively, were determined by EPR-monitored redox titrations or direct electrochemistry at a glassy carbon electrode. The trends in redox potential, ground-state spin, and electron delocalization of [MFe(3)S(4)](2+,+) clusters in P. furiosus ferredoxin are discussed as a function of heterometal (M = Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd, and Tl).

  17. A field-scale study of cadmium phytoremediation in a contaminated agricultural soil at Mae Sot District, Tak Province, Thailand: (1) Determination of Cd-hyperaccumulating plants.

    Science.gov (United States)

    Khaokaew, Saengdao; Landrot, Gautier

    2015-11-01

    The cadmium (Cd) phytoremediation capabilities of Gynura pseudochina, Chromolaena odorata, Conyza sumatrensis, Crassocephalum crepidioides and Nicotiana tabacum were determined by conducting in-situ experiments in a highly Cd-contaminated agricultural field at Mae Sot District, Tak Province, Thailand. Most of these five plant species, which are commonly found in Thailand, previously demonstrated Cd-hyperaccumulating capacities under greenhouse conditions. This study represented an important initial step in determining if any of these plants could, under field-conditions, effectively remove Cd from the Mae Sot contaminated fields, which represent a health threat to thousands of local villagers. All plant species had at least a 95% survival rate on the final harvest day. Additionally, all plant species, except C. odorata, could hyperaccumulate the extractable Cd amounts present in the soil, based on their associated Bioaccumulation Factor (BAF), Translocation Factor (TF), and background Vegetation Factor (VF). Therefore, the four Cd-hyperaccumulating plant species identified in this study may successfully treat a majority of contaminated fields at Mae Sot, as it was previously reported that Cd amounts present in a number of these soils were mostly available.

  18. First-principles prediction of a novel cadmium disulfide monolayer (penta-CdS2): Indirect to direct band gap transition by strain engineering

    Science.gov (United States)

    Naseri, Mosayeb

    2017-10-01

    Using first principles calculation a novel two dimensional structure of Cadmium Disulfide (penta-CdS2) is predicted. The calculated cohesive energy of -3.61 eV/atom indicates the thermodynamic stability of the predicted monolayer. Furthermore, the kinetic stability of the monolayer is examined by phonon dispersion calculation. According to our calculations, penta-CdS2 monolayer is a semiconductor with an indirect band gap of 2.97 eV, which can be effectively engineered by employing external biaxial compressive and tensile strain, The results emphasize that penta-CdS2 monolayer as a wide band gap semiconductor can become a promising material for application in new generation of nano-optoelectronic devices.

  19. Nerita chameleon as Biomonitoring Agent for Pb, Cd, Cu and Zn in Malaysian Intertidal Rocky Shore Environment

    Directory of Open Access Journals (Sweden)

    Mohd Fuad Miskon

    2015-06-01

    Full Text Available Pb, Cd, Cu and Zn in the soft tissue of Nerita chameleon from particular rocky shore sites along the east coast of Peninsular Malaysia were investigated. Samples were measured using ICP-MS with standard configuration. The metal accumulation patterns indicate consistent enrichment of essential metals. Locations with relatively high concentrations of the contaminant metals Pb, Cd and Cu are related to their close proximity to industrial activities and urban sites. Comparison with maximum permissible limits of toxic metals in food indicated the values were well within safety levels.

  20. Theoretical study of heavy metal Cd, Cu, Hg, and Ni(II) adsorption on the kaolinite(0 0 1) surface

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Jian, E-mail: zhaojian0209@aliyun.com [Institute of Applied Physics and Computational Mathematics, PO Box 8009, Beijing 100088 (China); State Key Laboratory of Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Beijing 100083 (China); He, Man-Chao [State Key Laboratory of Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Beijing 100083 (China)

    2014-10-30

    Highlights: • We investigated the adsorption of Cd, Cu, Hg, and Ni(II) on kaolinite(0 0 1) surface. • The adsorption capabilities of the kaolinite for HM atoms were Ni > Cu > Cd > Hg(II). • The adsorption energy increases with the coverage for Cd, Cu, and Hg(II) atoms. • The adsorption energy decreases with the coverage for Ni(II) atoms. - Abstract: Heavy metal pollution is currently of great concern because it has been recognized as a potential threat to air, water, and soil. Adsorption was one of the most popular methods for the removal of heavy metal. The adsorption of heavy metal Cd, Cu, Hg, and Ni(II) atoms on the hydroxylated (0 0 1) surface of kaolinite was investigated using density-functional theory within the generalized gradient approximation and a supercell approach. The coverage dependence of the adsorption structures and energetics were systematically studied for a wide range of coverage Θ [from 0.11 to 1.0 monolayers (ML)] and adsorption sites. The most stable among all possible adsorption sites for Cd(II) atom was the two-fold bridge site followed by the one-fold top site, and the top site was the most favorite adsorption site for Cu and Ni(II) atoms, while the three-fold hollow site was the most stable adsorption site for Hg(II) atom followed by the two-fold bridge site. The adsorption energy increases with the coverage for Cd, Cu, and Hg(II) atoms, thus indicating the higher stability of surface adsorption and a tendency to the formation of adsorbate islands (clusters) with increasing the coverage. However, the adsorption energy of Ni(II) atoms decreases when increasing the coverage. The adsorption capabilities of the kaolinite clay for the heavy metal atoms were in the order of Ni > Cu > Cd > Hg(II). The other properties of the Cd, Cu, Hg, and Ni(II)/kaolinite(0 0 1) system including the different charge distribution, the lattice relaxation, and the electronic density of states were also studied and discussed in detail.

  1. EBIC investigations of junction activity and the role of oxygen in CdS/CuInSe/sub 2/ devices

    Energy Technology Data Exchange (ETDEWEB)

    Matson, R.J.; Noufi, R.; Ahrenkiel, R.K.; Powell, R.C.; Cahen, D.

    1986-01-15

    EBIC characterization of CdS/CuInSe/sub 2/ device cross sections has been used to investigate junction activity as a function of post-deposition oxidation treatments. It was determined that the deposition of CdS onto single-crystal p-CuInSe/sub 2/ results in type conversion and the formation of a CuInSe/sub 2/ homojunction, rather than the expected heterojunction. Homojunctions have also been observed in as-deposited CdS/CuInSe/sub 2/ thin film devices. Post-deposition oxygen treatments of thin film devices serve to move the device junction nearer, if not up to, the heteroface and to largely remove both large (mm) and small (..mu..m) scale spatial variations in the I/sub sc/, thereby contributing to device performance improvement. This appears to occur by type converting the unintended CuInSe/sub 2/ n-layer via the elimination of deep level donor states. These processes are reversible by chemical reduction. They are quite temperature sensitive and are active even at room temperatures. Both hydrazine and an electron beam act to remove ''loosely bound'' oxygen and thereby prepare the system for a more optimal and stable incorporation of oxygen. The CuInSe/sub 2/ film stoichiometry appears to determine the concentration and kinds of defects. The resulting defect chemistry, in concert with oxygen, determines the electrical properties of the material.

  2. Competitive adsorption of Cd, Cu, Hg and Pb by agricultural soils of the Changjiang and Zhujiang deltas in China

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Soils can often be contaminated simultaneously by more than one heavy metal. The sorption-desorption behavior of a metal in a soil will be affected by the presence of other metals. Therefore, selective retention and competitive adsorption of the soils to heavy metals can affect their availability and movement through the soils. In this study, the simultaneous competitive adsorption of four heavy metals (Cd, Cu, Hg, and Pb) on ten agricultural soils collected from the Changjiang and Zhujiang deltas,China was assessed. The results showed that the competition affected the behavior of heavy metal cations in such a way that the soils adsorbed less Cd and Hg, and more Pb and Cu with increasing total metal concentrations, regardless of the molar concentration applied. As the applied concentrations increased, Pb and Cu adsorption increased, while Cd and Hg adsorption decreased.The adsorption sequence most found was Pb>Cu>Hg>Cd. The maximum adsorption capacity for the heavy metal cations was calculated, and affected markedly by soil properties. The results suggest that Hg and Cd have higher mobility associated to the lower adsorption and that Pb and Cu present the opposite behavior. Significant correlations were found between the maximum adsorption capacity of the metals and pH value and exchangeable acid, suggesting that soil pH and exchangeable acid were key factors controlling the solubility and mobility of the metals in the agricultural soils.

  3. One-Dimensional Reaction-Diffusion Simulation of Cu Migration in Polycrystalline CdTe Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Da [Arizona State University; Akis, Richard [Arizona State University; Brinkman, Daniel [Arizona State University; Sankin, Igor [First Solar; Fang, Tian [First Solar; Vasileska, Dragica [Arizona State University; Ringhofer, Christain [Arizona State University

    2014-06-13

    In this work, we report on developing 1D reaction-diffusion solver to understand the kinetics of p-type doping formation in CdTe absorbers and to shine some light on underlying causes of metastabilities observed in CdTe PV devices. Evolution of intrinsic and Cu-related defects in CdTe solar cell has been studied in time-space domain self-consistently with free carrier transport and Poisson equation. Resulting device performance was simulated as a function of Cu diffusion anneal time showing pronounced effect the evolution of associated acceptor and donor states can cause on device characteristics. Although 1D simulation has intrinsic limitations when applied to poly-crystalline films, the results suggest strong potential of the approach in better understanding of the performance and metastabilities of CdTe photovoltaic device.

  4. Determination of As, Cd, Cu, Hg and Pb in biological samples by modern electrothermal atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Sardans, Jordi, E-mail: j.sardans@creaf.uab.ca [Ecophysiological and Global Change Unit CSIC-CREAF, Edifici C, Universitat Autonoma de Barcelona, Bellaterra 08193, Barcelona (Spain); Montes, Fernando [Departamento de Ciencias Analiticas, Facultad de Ciencias, Universidad Nacional de Educacion a Distancia (UNED), C/ Senda del Rey 9. 28040 Madrid (Spain); Penuelas, Josep [Ecophysiological and Global Change Unit CSIC-CREAF, Edifici C, Universitat Autonoma de Barcelona, Bellaterra 08193, Barcelona (Spain)

    2010-02-15

    of this technique that reaches figures of merit equivalent to Inductively coupled plasma mass spectrometry (ICP-MS). Herein is presented an overview of recent advances and applications of (ETAAS) for the determination of As, Cd, Cu, Hg and Pb in biological samples drawn from studies over the last decade.

  5. Oxidative status of Matricaria chamomilla plants related to cadmium and copper uptake.

    Science.gov (United States)

    Kovácik, Jozef; Backor, Martin

    2008-08-01

    Cadmium (Cd) and copper (Cu) uptake by the plants of Matricaria chamomilla and relation to activities of guaiacol peroxidase (GPX, EC 1.11.1.7), catalase (CAT, EC 1.11.1.6) and glutathione reductase (GR, EC 1.6.4.2) up to 7 days of exposure to 3, 60 and 120 microM Cd or Cu was studied. Cd content in rosettes was ca. 10-fold higher in comparison to Cu while Cu was preferentially accumulated in the roots. In line with this observation, increase of CAT and GPX activity was similar in rosettes of Cd and Cu-treated plants, indicating non-redox active properties of Cd and low Cu accumulation. In the roots, Cu showed strong pro-oxidant effect, as judged from extreme stimulation of CAT and GPX, followed by increase of hydrogen peroxide and malondialdehyde. However, GPX seemed to be more important for alleviation of oxidative stress (ca. 93-250-fold higher activity in 120 microM Cu-treated roots). Cd had substantially lower influences and stimulated GR activity more than Cu. Activities of hydrogen peroxide-scavenging enzymes in relation to its accumulation are also discussed.

  6. A facile synthesis and spectral characterization of Cu{sup 2+} doped CdO/ZnS nanocomposite

    Energy Technology Data Exchange (ETDEWEB)

    Joyce Stella, R.; Thirumala Rao, G.; Babu, B.; Pushpa Manjari, V. [Department of Physics, University College of Sciences, Acharya Nagarjuna University, Nagarjuna Nagar, AP 522510 (India); Reddy, Ch. Venkata; Shim, Jaesool [School of Mechanical Engineering, Yeungnam University, Gyeongsan 712-749 (Korea, Republic of); Ravikumar, R.V.S.S.N., E-mail: rvssn@yahoo.co.in [Department of Physics, University College of Sciences, Acharya Nagarjuna University, Nagarjuna Nagar, AP 522510 (India)

    2015-06-15

    A facile two-step method is demonstrated for the preparation of Cu{sup 2+} doped CdO/ZnS nanocomposite. Systematic investigations like X-ray diffraction (XRD), Scanning electron microscopy (SEM) with EDS, transmission electron microscopy (TEM), FT-IR, electron paramagnetic resonance (EPR), optical absorption, photoluminescence (PL) and magnetic studies are carried out for the prepared material. From powder XRD, the nanocomposites are comprised for cubic phase of both CdO and ZnS in a close contact with each other. The ground state wave function of dopant ions has been estimated from EPR studies. Optical and EPR data confirm that doped Cu{sup 2+}ions occupy rhombically distorted octahedral sites with the host material. Due to doping, band gap has been changed and blue shifts occurred in PL. Magnetic measurements indicate a possible ferromagnetic response, associated to the exchange interaction between local spin-polarized electrons of Cu{sup 2+} ions and conductive electrons. - Graphical abstract: M–H curve of Cu{sup 2+} doped CdO–ZnS nanocomposites. The magnetic properties of Cu{sup 2+} doped CdO/ZnS nanocomposite has been investigated using vibrating sample magnetometer given as magnetization and hysteresis (M–H) curve. The magnetization curve with noticeable coercivity of M–H loop clearly indicate the existence of ferromagnetic ordering in Cu{sup 2+} doped CdO/ZnS nanocomposite at room temperature. According to the Ruderman–Kittel–Kasuya–Yosida (RKKY) theory, the exchange interaction between local spin-polarized electrons (such as the electrons of Cu{sup 2+} ions) and conductive electrons is the main cause that leads to the ferromagnetism. Coercivity (Hc) of the field is about 98 Oe, saturation magnetization (Ms) and remnant magnetization (Mr) of present sample is estimated to be 15.8×10{sup −3} and 1.43×10{sup −3} emu/g respectively. The ferromagnetism observed in the prepared material is not commencing with other impurities but expected to

  7. CONCENTRATIONS OF Cd, Cu AND Zn IN SEDIMENTS COLLECTED FROM URBAN LAKES AT KELANA JAYA, PENINSULAR MALAYSIA

    Institute of Scientific and Technical Information of China (English)

    Ahmad Ismail; Chee Kong YAP; Fong Fei Chan

    2004-01-01

    Kelana Jaya Municipal Park is a popular recreation park in Petaling Jaya. The five lakes, located within the Park, were ex-mining ponds, functioning as flood retention ponds and receiving effluents from nearby human activities mainly from residents and transportation. A study was conducted to determine the distribution and sources of heavy metals (Cd, Cu and Zn) in the sediments of Kelana Jaya Lakes. Concentrations of Cd, Cu, and Zn for surface sediment were determined by using aqua-regia method and sequential extraction technique. Total Cd concentrations ranged from 0.48 μg/g to 2.68 μg/g dry weight (dw) for all lakes. Total Cd concentrations in sediment of all lakes exceeded CCME (Canadian Council of Ministers of the Environment, 2001) guidelines. Total Cu concentrations ranged from 7.37μg/g to 73.6 μg/g (dw). Only Cu concentration in one lake exceeded the CCME guidelines besides having the highest mean concentration among all. Total Zn concentrations ranged from 107 μg/g to 529 μg/g (dw). Again, The Zn concentrations in three lakes were found to exceed CCME guidelines for Zn concentration in freshwater sediment. Geochemical study on sediment revealed that nonresistant fractions for Cd, Cu and Zn for other lakes there Cu and Zn indicated that lakes in the park, especially near oxidation pond and monsoon drains, could have received anthropogenic metals from domestic wastes. Rehabilitation program and regular biomonitoring at Kelana Jaya Lakes are therefore recommended.

  8. Synthesis, identification and thermal decomposition of double sulfites like Cu2SO3·MSO3·2H2O (M=Cu, Fe, Mn or Cd)

    OpenAIRE

    2000-01-01

    Texto completo: acesso restrito. p.17–27 Double sulfites with empirical formula Cu2SO3·MSO3·2H2O (where M is Cu, Fe, Mn, or Cd) were obtained by saturation with sulfur dioxide gas of an aqueous mixture of MII sulfate and copper sulfate at room temperature. The salts obtained were identified by infrared spectra, X-ray powder diffraction and elemental analysis. The compounds studied are isostructural with the CuII replacement by MnII, FeII, and CdII in Chevreul’s salt (Cu2SO3·CuSO3·2H2O). Th...

  9. Magnetic properties of (Zn,Cd,Cu) Co Fe Ti spinel oxides

    Science.gov (United States)

    Moyo, T.; Giordanengo, B.; de Melo, M. A. C.; Takeuchi, A. Y.; Silva, P. R. J.; Saitovitch, H.; Baggio-Saitovitch, E.

    1999-09-01

    AC susceptibility, magnetization and Mössbauer spectra have been measured for (Zn,Cd,Cu)0.5Co0.9Fe1.2Ti0.4O4 and Zn0.3Co0.9Fe1.4Ti0.4O4 spinel oxides. The variation of coercive field below the spin glass transition temperature Tsg is found to fit a double exponential function of the form H_c left( T right) = H_{1e} ^{ - β _1 T} + H_{2e} ^{ - β _2 T} , where Hi and βi are constants. Mössbauer spectra and analysis show superparamagnetic fluctuations associated with magnetic clusters. Symmetric doublets above Tsg are decomposed into quadrupole doublets associated with tetrahedral (A) and octahedral (B) sites.

  10. Transport mechanisms in ZnO/CdS/CuInSe sub 2 solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, J.; Fahrenbruch, A.L.; Bube, R.H. (Department of Materials Science and Engineering, Stanford University, Stanford, California 94305 (USA))

    1990-11-01

    The transport mechanisms in ZnO/CdS/CuInSe{sub 2} solar cells prepared by ARCO (now Siemens) Solar Inc. have been analyzed by measurements of current versus voltage at different temperatures in the dark, short-circuit current versus open-circuit voltage at different temperatures in the light, spectral response of quantum efficiency, and junction capacitance. In the dark, recombination in the depletion region and/or thermally assisted tunneling are the dominant transport mechanisms. The observation of a smaller open-circuit voltage than would be predicted from the dark transport parameters is the result of a small change in the transport parameters under illumination, probably without a change in transport mechanism.

  11. Temporal trends of Cd, Cu, Hg, Pb and Zn in mussel (Mytilus galloprovincialis) from the Spanish North-Atlantic coast 1991-1999.

    Science.gov (United States)

    Besada, V; Fumega, J; Vaamonde, A

    2002-04-15

    Temporal trends for heavy metals (Cd, Cu, Hg, Pb and Zn) in mussel (Mytilus galloprovincialis) from the Galician and Cantabrian areas in Spain, where samples were yearly collected from 1991 to 1999, are presented. This study was carried out by the Centro Oceanográfico de Vigo of the Instituto Español de Oceanografia (I.E.O.) as part of the Spanish contribution to the Joint Assessment and Monitoring Programme (JAMP) of the OSPAR Convention. The experimental work and subsequent statistical treatment, following OSPAR procedures and guidelines, are described. In order to carry out the statistical treatment of the data, median values of the different shell length classes were used for each contaminant, year and area. The Kendall T-b correlation coefficient was used with the purpose of demonstrating the existence of a downward significant temporal trend in the pollution levels, according to the advice of ICES Working Group on Statistical Aspects of Environmental Monitoring. A decrease of copper levels was detected in Vigo, Pontevedra and Arosa, of mercury in Pontevedra and A Coruña, of lead in Vigo, Pontevedra, A Coruña and Bilbao and of zinc in Pontevedra and A Coruña. However, a cadmium positive trend was registered at Ria de Vigo. No significant trends were detected in the other cases.

  12. The Uptake Mechanism of Cd(II, Cr(VI, Cu(II, Pb(II, and Zn(II by Mycelia and Fruiting Bodies of Galerina vittiformis

    Directory of Open Access Journals (Sweden)

    Dilna Damodaran

    2013-01-01

    Full Text Available Optimum concentrations of heavy metals like copper, cadmium, lead, chromium, and zinc in soil are essential in carrying out various cellular activities in minimum concentrations and hence help in sustaining all life forms, although higher concentration of these metals is lethal to most of the life forms. Galerina vittiformis, a macrofungus, was found to accumulate these heavy metals into its fleshy fruiting body in the order Pb(II > Cd(II > Cu(II > Zn(II > Cr(VI from 50 mg/kg soil. It possesses various ranges of potential cellular mechanisms that may be involved in detoxification of heavy metals and thus increases its tolerance to heavy metal stress, mainly by producing organic acids and phytochelatins (PCs. These components help in repairing stress damaged proteins and compartmentalisation of metals to vacuoles. The stress tolerance mechanism can be deduced by various analytical tools like SEM-EDX, FTIR, and LC-MS. Production of two kinds of phytochelatins was observed in the organism in response to metal stress.

  13. Influence of Ca/Mg ratio on phytoextraction properties of Salix viminalis I. The effectiveness of Cd, Cu, Pb, and Zn bioaccumulation and plant growth.

    Science.gov (United States)

    Mleczek, Mirosław; Kozlowska, Monika; Kaczmarek, Zygmunt; Chadzinikolau, Tamara; Golinski, Piotr

    2012-01-01

    Phytoremediation and its efficiency--influenced by several factors-is prime concern in reduction of environment contamination with heavy metals. The aim of the study was to estimate in controlled conditions--in relation to the natural Ca/Mg ratio 4:1--the influence of different Ca/Mg ratios (1:1/4, 20:1, 1:10) on selected heavy metals (Cd, Cu, Pb, and Zn) accumulation efficiency shown by three morphological parts of Salix viminalis 'Cinamomea' (cane bark, shoots and roots). Accumulation of heavy metals in experimental conditions was significantly Ca/Mg ratio dependent, and occurred in the following order: 1:10 > 4:1 > 20:1 > 1:1/4. The highest accumulation under 0.5 mM solutions (as compared to 0.1 mM) was noted for copper and zinc, and the lowest for cadmium. Biometric parameters of Salix viminalis cuttings revealed the highest biomass productivity under 20:1 and 4:1 Ca/Mg ratios. In the case of shoot length increase, both metal concentration and kind of metal present in the solution were important. The results indicate that higher calcium ion concentration in solution (Ca/Mg 20:1) stimulates Salix viminalis growth by 3 fold when compared to other Ca/Mg ratio. It can be an important factor in remediation of the environment with this plant.

  14. Immobilization of Cu(2+) and Cd(2+) by earthworm manure derived biochar in acidic circumstance.

    Science.gov (United States)

    Wang, Zhanghong; Shen, Fei; Shen, Dekui; Jiang, Yahui; Xiao, Rui

    2017-03-01

    Earthworm manure, the by-product obtained from the disposing of biowastes by earthworm breeding, is largely produced and employed as a feedstock for biochar preparation through pyrolysis. For repairing acidic soil or acidic electroplating effluent, biochar physicochemical properties would suffer from some changes like an acidic washing process, which hence affected its application functions. Pristine biochar (UBC) from pyrolysis of earthworm manure at 700°C and biochar treated by HCl (WBC) were comparatively investigated regarding their physicochemical properties, adsorption capability and adsorption mechanism of Cu(2+) and Cd(2+) from aqueous solution to explore the immobilization characteristics of biochar in acidic environment. After HCl treatment, the soluble ash content and phenolic-OH in the WBC sample was notably decreased against the increase of the carboxyl CO, aromatic CC and Si-O-Si, compared to that of UBC. All adsorption processes can be well described by Langmuir isotherm model. The calculated maximum adsorption capacity of Cu(2+) and Cd(2+) adsorption on UBC were 36.56 and 29.31mg/g, respectively, which were higher than that of WBC (8.64 and 12.81mg/g, respectively), indicating that HCl treatment significantly decreased biochar adsorption ability. Mechanism analysis revealed that alkali and alkaline earth metallic, salts (carbonates, phosphates and silicates), and surface functional groups were responsible for UBC adsorption, corresponding to ion exchange, precipitation and complexation, respectively. However, ion exchange made little contributions to WBC adsorption due to the great loss of soluble ash content. WBC adsorption was mainly attributed to the abundant exposure of silicates and surface functional groups (carboxyl CO and aromatic CC). Copyright © 2016. Published by Elsevier B.V.

  15. EVALUATION OF FLY ASHES FOR THE REMOVAL OF CU, NI AND CD FROM ACIDIC WATERS

    Directory of Open Access Journals (Sweden)

    BEGOÑA FERNÁNDEZ PÉREZ

    2010-01-01

    Full Text Available La presencia de sulfuros en la mayoría de los residuos mineros y la subsiguiente formación de los drenajes ácidos de mina (AMD ha sido ampliamente reconocida como uno de los grandes problemas medioambientales actuales. Las aguas procedentes de las minas abandonadas, con miles de metros cúbicos de residuos dispersos en escombreras y balsas mineras, se ven afectadas por este tipo de contaminación caracterizada por su acidez alto contenido en sulfatos y metales pesados como el Fe, Mn, Al, Cu, Ni, y Cd. Este estudio fue diseñado para evaluar el efecto del uso de cenizas volantes procedentes de centrales eléctricas como un neutralizador de las aguas ácidas resultantes de este tipo de instalaciones abandonadas. En este trabajo, y debido a la heterogeneidad de los contaminantes presentes en dicho residuo hemos estudiado la eliminación del Ni, Cu y Cd. Para ello se estudiaron diferentes parámetros: la concentración de metal y el pH de la solución a tratar, el tiempo de reacción y la densidad de pulpa. Las cenizas volantes se pueden utilizar como agentes de neutralización o fijación. Su utilización en contacto con AMD permite aumentar la alcalinidad y el pH. Esto dará lugar a la precipitación de los hidróxidos metálicos correspondientes.

  16. Zinc and cadmium monosalicylates

    Energy Technology Data Exchange (ETDEWEB)

    Kharitonov, Yu.Ya.; Tujebakhova, Z.K. (Moskovskij Khimiko-Tekhnologicheskij Inst. (USSR))

    1984-06-01

    Zinc and cadmium monosalicylates of the composition MSal, where M-Zn or Cd, Sal - twice deprotonated residue of salicylic acid O-HOC/sub 6/H/sub 4/COOH (H/sub 2/Sal), are singled out and characterized. When studying thermograms, thermogravigrams, IR absorption spectra, roentgenograms of cadmium salicylate compounds (Cd(OC/sub 6/H/sub 4/COO) and products of their thermal transformations, the processes of thermal decomposition of the compounds have been characterized. The process of cadmium monosalicylate decomposition takes place in one stage. Complete loss of salicylate acido group occurs in the range of 320-460 deg. At this decomposition stage cadmium oxide is formed. A supposition is made that cadmium complex has tetrahedral configuration, at that, each salicylate group plays the role of tetradentate-bridge ligand. The compound evidently has a polymer structure.

  17. CdS quantum dots sensitized Cu doped ZnO nanostructured thin films for solar cell applications

    Science.gov (United States)

    Poornima, K.; Gopala Krishnan, K.; Lalitha, B.; Raja, M.

    2015-07-01

    ZnO nanorods and Cu doped ZnO nanorods thin films have been prepared by simple hydrothermal method. CdS quantum dots are sensitized with Cu doped ZnO nanorod thin films using successive ionic layer adsorption and reaction (SILAR) method. The X-ray diffraction study reveals that ZnO nanorods, and CdS quantum dot sensitized Cu doped ZnO nanorods exhibit hexagonal structure. The scanning electron microscope image shows the presence of ZnO nanorods. The average diameter and length of the aligned nanorod is 300 nm and 1.5 μm respectively. The absorption spectra shows that the absorption edge of CdS quantum dot sensitized ZnO nanorod thin film is shifted toward longer wavelength region when compared to the absorption edge of ZnO nanorods film. The conversion efficiency of the CdS quantum dot sensitized Cu doped ZnO nanorod thin film solar cell is 1.5%.

  18. Bioaccumulation of Pb, Cd, Cu, and Cr by Porphyridium cruentum (S.F. Gray Nägeli

    Directory of Open Access Journals (Sweden)

    Tri Retnaningsih Soeprobowati

    2013-06-01

    Full Text Available The red microalgae Porphyridium cruentum (S.F. Gray Nägeli usually was used as feeds, a pigment for food and cosmetic, and antiviral activity that might be became industrial interest. Similar to another microalgae, P. cruentum has an ability to remediate heavy metals pollution, however research on it still limited. This research was conducted in order to find out the the accumulation of Pb, Cd, Cr, and Cu on the P. cruentum. A laboratory experiment were developed with different concentrations. Based on this research, P. cruentum with the treatment of 1 mg/L had reduced higher Cu, Pb, Cd, and Cr concentrations rather than 3 and 5 mg/L concentrations, respectively. This was also similar to the BCF, that in day 8 in order of Cu > Cr > Cd > Pb, respectively; however, in day 15 was Cu > Pb > Cd > Cr. The length of treatment influenced BCF value. P. cruentum was good for bioremediation of heavy metal pollution, with the advantage of the short of accumulation time.

  19. Removal of As, Cd, Cr, Cu, Ni and Zn from polluted water using an iron based sorbent

    DEFF Research Database (Denmark)

    Genc-Fuhrman, Hülya; Wu, P.; Zhou, Y.

    2008-01-01

    In this study fixed-bed sorption filters are filled with an iron based sorbent (ferrosorp plus, FP) and used to remove a range of heavy metals (i.e. As, Cd, Cr, Cu, Ni, and Zn) from polluted water. It is found that FP is very effective at simultaneous removal of the heavy metals, and the magnitud...

  20. Implications of orbital hybridization on the electronic properties of doped quantum dots: the case of Cu:CdSe

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Joshua T.; Forsythe, Kyle; Hutchins, Jamie; Meulenberg, Robert W.

    2016-04-13

    This paper investigates how chemical dopants affect the electronic properties of CdSe quantum dots (QDs) and why a model that incorporates the concepts of orbital hybridization must be used to understand these properties. Extended X-ray absorption fine structure spectroscopy measurements show that copper dopants in CdSe QDs occur primarily through a statistical doping mechanism. Ultraviolet photoemission spectroscopy (UPS) experiments provide a detailed insight on the valence band (VB) structure of doped and undoped QDs. Using UPS measurements, we are able to observe photoemission from the Cu d-levels above VB maximum of the QDs which allows a complete picture of the energy band landscape of these materials. This information provides insights into many of the physical properties of doped QDs, including the highly debated near-infrared photoluminescence in Cu doped CdSe QDs. We show that all our results point to a common theme of orbital hybridization in Cu doped CdSe QDs which leads to optically and electronically active states below the conduction band minimum. Our model is supported from current–voltage measurements of doped and undoped materials, which exhibit Schottky to Ohmic behavior with Cu doping, suggestive of a tuning of the lowest energy states near the Fermi level.

  1. Removal of As, Cd, Cr, Cu, Ni and Zn from polluted water using an iron based sorbent

    DEFF Research Database (Denmark)

    Genc-Fuhrman, Hülya; Wu, P.; Zhou, Y.;

    2008-01-01

    In this study fixed-bed sorption filters are filled with an iron based sorbent (ferrosorp plus, FP) and used to remove a range of heavy metals (i.e. As, Cd, Cr, Cu, Ni, and Zn) from polluted water. It is found that FP is very effective at simultaneous removal of the heavy metals, and the magnitud...

  2. Risk assessment for Cd, Cu, Pb, and Zn in urban soils: chemical availability as the central concept

    NARCIS (Netherlands)

    Rodrigues, S.R.; Cruz, N.; Coelho, C.; Henriques, B.; Carvalho, L.; Duarte, A.C.; Pereira, E.; Römkens, P.F.A.M.

    2013-01-01

    To assess the geochemical reactivity and oral bioaccessibility of Cd, Cu, Pb and Zn in urban soils from the Porto area, four extractions were performed including Aqua Regia (AR; pseudototal), 0.43 M HNO(3) (reactive), 0.01 M CaCl(2) (available), and 0.4 M glycine at pH = 1.5, SBET method (oral bioac

  3. Risk assessment for Cd, Cu, Pb, and Zn in urban soils: chemical availability as the central concept

    NARCIS (Netherlands)

    Rodrigues, S.R.; Cruz, N.; Coelho, C.; Henriques, B.; Carvalho, L.; Duarte, A.C.; Pereira, E.; Römkens, P.F.A.M.

    2013-01-01

    To assess the geochemical reactivity and oral bioaccessibility of Cd, Cu, Pb and Zn in urban soils from the Porto area, four extractions were performed including Aqua Regia (AR; pseudototal), 0.43 M HNO(3) (reactive), 0.01 M CaCl(2) (available), and 0.4 M glycine at pH = 1.5, SBET method (oral bioac

  4. Graphite furnace analysis of a series of metals (Cu, Mn, Pb, Zn and Cd) in ox kidney

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Vivianne L.B. de; Nascimento, Rizia K. do; Paiva, Ana Claudia de; Silva, Josenilda M. da, E-mail: vlsouza@cnen.gov.br, E-mail: riziakelia@hotmail.com, E-mail: acpaiva@cnen.gov.br, E-mail: jmnilda@hotmail.com [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil); Melo, Jessica V. de, E-mail: Jessica_clorofila@hotmail.com [Universidade de Pernambuco, Recife, PE (Brazil)

    2013-07-01

    The aim of this study was to create a methodology for animal tissue analysis, with the use of flame atomic absorption spectrophotometry techniques and graphite furnace analysis to determining metal concentrations in ox kidney. The organ of this animal can be considered a great nutritional food, due to the high protein and micronutrient content beyond the ability to absorb and concentrate important metals such as Zn, Fe, Mn and Se. On the other hand, there is a risk when eating this food owing to the capacity to accumulate toxic metals such as Pb and Cd. In accordance with the laboratory analysis, Zn can be analyzed by flame atomic absorption spectrophotometry, but other metals such as Cu, Mn, Pb and Cd, could only be detected by graphite furnace analysis. The results showed that there is more Zn and Cu than other metals. Such metals follows an order reported by the literature (Zn > Cu > Cd > Pb > Mn). The results showed that kidney is actually a rich source of Zn and Cu. The Cd levels in the ox kidney did not exceed the values which cause toxic effects. The adequacy of the results indicates that the proposed methodology can be used for animal tissue analysis.(author)

  5. Accumulation of Cd, Cu and Zn in shoots of maize (Zea mays L.) exposed to 0.8 or 20 nM Cd during vegetative growth and the relation with xylem sap composition.

    Science.gov (United States)

    Nguyen, C; Soulier, A J; Masson, P; Bussière, S; Cornu, J Y

    2016-02-01

    This work focuses on the exposure of maize plants to nanomolar concentrations of Cd, which is relevant for agricultural soils cropped with food and feed plants. Maize plants were cultivated in nutrient solution at 0.8 or 20 nM Cd during the vegetative growth stages. No significant hormesis or toxic effects of Cd were observed on maize growth, but a decrease in the allocation of Cd to shoots between the 0.8 and 20 nM Cd exposures revealed that the plants already responded to these low concentrations of Cd according to a shoot Cd excluder strategy. The Cd, Cu and Zn concentrations in shoots decreased with time as the result of an early decrease in the root/shoot ratio and of a decrease in the coefficient of allocation to aboveground for Zn and Cd at 20 nM. As a consequence, shoots of young plants were richer in micronutrients Cu and Zn but also in toxic Cd. The rate of delivery of Cd, Cu and Zn from xylem sap was successfully used to predict the time course of concentrations of Cd, Cu and Zn in the shoot. However, it overestimated the actual concentrations of Cd in the shoot, presumably because the reallocation of this trace element from shoots back to roots was not taken into account.

  6. Selective Facet Reactivity During Cation Exchange in Cadmium Sulfide Nanorods

    Energy Technology Data Exchange (ETDEWEB)

    Sadtler, Bryce; Demchenko, Denis; Zheng, Haimei; Hughes, Steven; Merkle, Maxwell; Dahmen, Ulrich; Wang, Lin-Wang; Alivisatos, A. Paul

    2008-12-18

    The partial transformation of ionic nanocrystals through cation exchange has been used to synthesize nanocrystal heterostructures. We demonstrate that the selectivity for cation exchange to take place at different facets of the nanocrystal plays an important role in determining the resulting morphology of the binary heterostructure. In the case of copper I (Cu+) cation exchange in cadmium sulfide (CdS) nanorods, the reaction starts preferentially at the ends of the nanorods such that copper sulfide (Cu2S) grows inwards from either end. The resulting morphology is very different from the striped pattern obtained in our previous studies of silver I (Ag+) exchange in CdS nanorods where non-selective nucleation of silver sulfide (Ag2S) occurs. From interface formation energies calculated for several models of epitaxialconnections between CdS and Cu2S or Ag2S, we infer the relative stability of each interface during the nucleation and growth of Cu2S or Ag2S within the CdS nanorods. The epitaxial connections of Cu2S to the end facets of CdS nanorods minimize the formation energy, making these interfaces stable throughout the exchange reaction. However, as the two end facets of wurtzite CdS nanorods are crystallographically nonequivalent, asymmetric heterostructures can be produced.

  7. Fluorescent probe for detection of Cu2+ using core-shell CdTe/ZnS quantum dots.

    Science.gov (United States)

    Bian, Wei; Wang, Fang; Zhang, Hao; Zhang, Lin; Wang, Li; Shuang, Shaomin

    2015-11-01

    Core-shell CdTe/ZnS quantum dots capped with 3-mercaptopropionic acid (MPA) were successfully synthesized in aqueous medium by hydrothermal synthesis. These quantum dots have advantages compared to traditional quantum dots with limited biological applications, high toxicity and tendency to aggregate. The concentration of Cu(2+) has a significant impact on the fluorescence intensity of quantum dots (QDs), therefore, a rapid sensitive and selective fluorescence probe has been proposed for the detection of Cu(2+) in aqueous solution. Under optimal conditions, the fluorescence intensity of CdTe/ZnS QDs was linearly proportional to the concentration of Cu(2+) in the range from 2.5 × 10(-9) M to 17.5 × 10(-7) M with the limit of 1.5 × 10(-9) M and relative standard deviation of 0.23%. The quenching mechanism is static quenching with recoveries of 97.30-102.75%.

  8. Optical analysis of lens-like Cu{sub 2}CdSnS{sub 4} quaternary alloy nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Odeh, Ali Abu; Ayub, R.M. [University Malaysia Perlis, Institute of Nano Electronic Engineering, Kangar, Perlis (Malaysia); Al-Douri, Y. [University Malaysia Perlis, Institute of Nano Electronic Engineering, Kangar, Perlis (Malaysia); University of Sidi-Bel-Abbes, Physics Department, Faculty of Science, Sidi-Bel-Abbes (Algeria); Ameri, M. [Universite Djilali Liabes de Sidi Bel- Abbes, Laboratoire Physico-Chimie des Materiaux Avances (LPCMA), Sidi-Bel-Abbes (Algeria); Bouhemadou, A. [University of Setif 1, Laboratory for Developing New Materials and Their Characterization, Setif (Algeria); Prakash, Deo [SMVD University, Faculty of Engineering, School of Computer Science and Engineering, Kakryal, Katra, J and K (India); Verma, K.D. [S.V. College, Material Science Research Laboratory, Department of Physics, Aligarh, U.P. (India)

    2016-10-15

    Cu{sub 2}CdSnS{sub 4} quaternary alloy nanostructures with different copper concentrations (0.2, 0.4, 0.6, 0.8 and 1.0 M) were successfully synthesized on n-type silicon substrates using spin coating technique with annealing temperature at 300 C. Optical properties were analyzed through UV-Vis and Photoluminescence spectroscopies, and thus, there is a change in energy band gap with increasing Cu concentration from 0.2 to 1.0 M. The structural properties of Cu{sub 2}CdSnS{sub 4} quaternary alloy nanostructures were investigated by X-ray diffraction. The particles size and shape have a direct relationship with copper concentration. Morphological and topographical studies were carried out by using scanning electron microscopy and atomic force microscopy. The obtained results are investigated to be available in the literature for future studies. (orig.)

  9. Synthesis and characterization of CdS/CuAl2O4 core-shell: application to photocatalytic eosin degradation

    Science.gov (United States)

    Bellal, B.; Trari, M.; Afalfiz, A.

    2015-08-01

    The advantages of the hetero-junction CdS/CuAl2O4 for the photocatalytic eosin degradation are reported. Composite semiconductors are elaborated by co-precipitation of CdS on the spinel CuAl2O4 giving a core-shell structure with a uniform dispersion and intimate contact of the spinel nanoparticles inside the hexagonal CdS. The Mott-Schottky plots ( C -2- V) of both materials show linear behaviors from which flat band potentials are determined. The photoactivity increases with increasing the mass of the sensitizer CdS and the best performance is achieved on CdS/CuAl2O4 (85 %/15 %). The pH has a strong influence on the degradation and the photoactivity peaks at pH 7.78. The dark adsorption eosin is weak (~4 %), hence the change in the eosin concentration is attributed to the photocatalytic process. The degradation follows a zero-order kinetic with a rate constant of 5.2 × 10-8 mol L-1 mn-1 while that of the photolysis is seven times lower (0.75 × 10-8 mol L-1 mn-1).

  10. Soft X-ray photoemission investigation of the CdS/CuInSe 2 heterojunction interface

    Science.gov (United States)

    Nelson, Art J.; Gebhard, Steven; Kazmerski, L. L.; Rockett, Angus; Colavita, Elio; Engelhardt, Mike; Höchst, Hartmut

    1991-06-01

    Synchrotron radiation soft X-ray photoemission spectroscopy was used to investigate the development of the electronic structure at theCdS/CuInSe 2 heterojunction interface. CdS overlayers were deposited sequentially in steps on steps on single-crystal p- and n-type CuInSe 2 at 250°C. Results indicate that the CdS grows in registry with the substrate, initially in a two-dimensional growth mode followed by three-dimensional island growth as is corroborated by RHEED analysis. Photoemission measurements were acquired after each growth in order to observe changes in the valence band electronic structure as well as changes in the In4d, Se3d, Cd4d and S2p core lines. The results were used to correlate the interface chemistry with the electronic structure at these interfaces and to directly determine theCdS/CuInSe 2 heterojunction valence band discontinuity and the consequent heterojunction band diagram.

  11. The effect of In doping in CdS/CuInSe[sub 2] heterojunction formation: A photoemission investigation

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, A.J.; Niles, D.W. (National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, Colorado 80401 (United States)); Rioux, D.; Patel, R.; Hoechst, H. (Synchrotron Radiation Center, 3731 Schneider Drive, Stoughton, Wicsonsin 53589 (United States))

    1992-12-01

    Synchrotron radiation soft x-ray photoemission spectroscopy was used to investigate the development of the electronic structure at the CdS(In)/CuInSe[sub 2] heterojunction interface. In-doped CdS overlayers were deposited in steps on single-crystal [ital n]-type CuInSe[sub 2] at 250 [degree]C. Results indicate that the CdS(In) grows in registry with the substrate, initially in a two dimensional growth mode followed by three dimensional island growth as is corroborated by RHEED analysis. Photoemission measurements were acquired after each growth in order to observe changes in the valence band electronic structure as well as changes in the In4d, Se3d, Cd4d, and S2p core lines. The results were used to correlate the interface chemistry with the electronic structure at these interfaces and to directly determine the CdS(In)/CuInSe[sub 2] heterojunction valence band discontinuity and the consequent heterojunction band diagram as a function of In dopant concentration. We measured a valence band offset [Delta]E[sub v]=0.3 eV, independent of In doping.

  12. The potential pool of Co, Ni, Cu, Pb and Cd organic complexing ligands in coastal and urban rain waters

    Science.gov (United States)

    Nimmo, Malcolm; Fones, Gary R.

    The detection of dissolved ACSV (adsorptive cathodic stripping voltammetry) Co, Ni, Cu, Cd and Pb in rain waters collected from an urban and a coastal site in the northwest of England is described. The presence of metal complexing organic ligands in rain waters is indicated with an overall percentage of ACSV non - labile dissolved metal of the total dissolved metal fraction ( = %ACSV nl/t) being 33 (33); 28 (35); 26 (32); 33 (25); 27 (34): for Co, Ni, Cu, Cd and Pb, respectively, for the urban site (and coastal site). ACSV metal lability is theoretically defined and is dependent upon the a-coefficient ( β' MAL [AL]) of the added ACSV ligand (AL). No major differences were observed between %ACSV nl/t metal fractions in rain waters collected at the two contrasting sites for all the metals considered. As Cu, Pb, Cd and Ni had values greater than 10 for their Ef crust (crustal enrichment factor), rain water collected from both sites had predominantly anthropic chemical characteristics. The commonality of the aerosol chemical characteristics at the two sites may account for the observed similar (relative to total metal concentrations) proportions of metal organic complexation at the two different sites. The general order of increasing organic associations was Cu = Pb = Ni < Co < Cd, although the analytical log α-coefficients ( β' MAL [AL]) for each metal were different (9.62—Ni; 9.27—Cu; 5.29—Co; 2.15—Pb; 1.13—Cd). Significant correlations were encountered between ACSV non - labile and total dissolved trace metal concentrations of the pooled data from both sites, again an indication of the similarity of the chemical characteristics of the scavenged soluble organic ligands associated with background aerosol material.

  13. Surface enhanced Raman scattering, natural bond orbitals and Mulliken atomic charge distribution in the normal modes of diethyldithiocarbamate cadmium (II) complex, [Cd(DDTC)2

    Science.gov (United States)

    Téllez Soto, C. A.; Costa, A. C.; Versiane, O.; Lemma, T.; Machado, N. C. F.; Mondragón, M. A.; Martin, A. A.

    2015-07-01

    Theoretical and experimental bands have been assigned to the Fourier Transform Infrared (FT-IR) and FT-Raman spectra of the bis(diethyldithiocarbamate)Cd(II) complex, abbreviated as ([Cd(DDTC)2]). The calculations and spectral interpretation have been based on the DFT/B3LYP method, infrared and Raman second derivative spectra, and band deconvolution analysis to assist in the assignment of observed fundamentals. This study validated the unusual pseudo tetrahedral molecular structure formed around the Cd(II) cation. Surface-enhanced Raman scattering (SERS) was used to determine the interactions of the normal-modes of the diethyldithiocarbamate cadmium (II) complex on nano-structured silver surfaces. Natural bond orbital (NBO) analysis was also carried out to study the Cd(II) hybridization causing the pseudo tetrahedral geometry of the framework of the [Cd(DDTC)2] complex, and to confirm the charge transfer mechanisms through second order perturbation theory analysis of the Fox Matrix. In order to find out the electronic dispersion of the Mulliken atomic charges (MAC) in the normal modes, we calculated the MAC for each normal mode and correlated these values with the SERS effect. Experimental UV-Vis spectra were obtained and charge transfer bands were assigned. Good agreement between the calculated and experimental values for the vibrational and UV-Vis spectra was obtained.

  14. Toxicity of cadmium to soil microbial biomass and its activity: Effect of incubation time on Cd ecological dose in a paddy soil

    Institute of Scientific and Technical Information of China (English)

    LIAO Min; LUO Yun-kuo; ZHAO Xiao-min; Huang Chang-yong

    2005-01-01

    Cadmium (Cd) is ubiquitous in the human environment and has toxic effect on soil microbial biomass or its activity,including microbial biomass carbon (Cmic), dehydrogenase activity (DHA) and basal respiration (BR), etc., Cmic, DHA, BR were used as bioindicators of the toxic effect of Cd in soil. This study was conducted to determine the effects of Cd on soil microbial biomass and its activity in a paddy soil. The inhibition of microbial biomass and its activity by different Cd concentrations was described by the kinetic model (M1) and the sigmoid dose-response model (M2) in order to calculate three ecological doses of Cd:ED50, ED10 and ED5. Results showed that M2 was better fit than M1 for describing the ecological toxicity dose effect of cadmium on soil microbial biomass and its activity in a paddy soil. M2 for ED values (mg/kg soil) of Cmic, DHA, BR best fitted the measured paddy soil bioindicators. M2 showed that all ED values (mg/kg) increased in turn with increased incubation time. ED50, ED10 and ED5 of Cmic with M2 were increased in turn from 403.2, 141.1,100.4 to 1000.7, 230.9, 144.8, respectively, after 10 d to 60 d of incubation. ED50, ED10 and ED5 of DHA with M2 increased in turn from 67.6, 6.2, 1.5 to 101.1, 50.9, 41.0, respectively, after 10 d to 60 d of incubation. ED50, ED10 and ED5 of BR with M2 increased in turn from 149.7, 6.5, 1.8 to 156.5, 50.8, 35.5, respectively,after 10 d to 60 d of incubation. So the ecological dose increased in turn with increased incubation time for M2 showed that toxicity of cadmium to soil microbial biomass and its activity was decreased with increased incubation time.

  15. Al-Cd Alloy Formation by Aluminum Underpotential Deposition from AlCl3+NaCl Melts on Cadmium Substrate

    Science.gov (United States)

    Jovićević, Niko; Cvetković, Vesna S.; Kamberović, Željko J.; Jovićević, Jovan N.

    2013-02-01

    Aluminum was incorporated into a polycrystalline cadmium electrode surface by underpotential deposition from equimolar AlCl3+ NaCl melt at 473 K, 523 K, and 573 K (200 °C, 250 °C, and 300 °C). The process was studied by linear sweep voltammetry and potentiostatic deposition/galvanostatic striping. The deposits were characterized X-ray diffraction (XRD), Auger electron spectroscopy (AES), and electron probe microanalyzer (EPMA). The electrochemical measurements showed evidence of Cd-Al alloys being formed but they could not be identified. The growth kinetics of the Cd-Al layers of various proportion and depths that depended on temperature and deposition time were described.

  16. Metallothionein-like proteins induced by cadmium stress in the scallop Mizuhopecten yessoensis

    Science.gov (United States)

    Zhukovskaya, Avianna F.; Belcheva, Nina N.; Slobodskova, Valentina S.; Chelomin, Viktor P.

    2012-09-01

    Organisms have evolved a cellular response called stress protein response that increases their tolerance in adverse environmental conditions. Well known stress proteins that bind essential and toxic metals are metallothionein (MT). The scallop Mizuhopecten yessoensis is the most interesting organism because it is able to accumulate toxic cadmium in its digestive gland. However, in the tissue of the digestive gland of Mizuhopecten yessoensis MT (metallothioneins) have not been found. Eastern scallops, Mizuhopecten yessoensis, were collected from two locations — one clean and one polluted site. The concentrations of cadmium (Cd), copper (Cu) and zinc (Zn) were measured in the digestive gland. There was a significant increase in Cd concentrations in this studied tissue. We found that in the presence of cadmium Mizuhopecten yessoensis can induce high molecular proteins. The results of experiments have shown that Cd-binding ligands have a number of properties similar to MT: acetone and temperature stability; the ability to bind some metals, including Cd, Cu and Zn. Protein chromatography (FPLC, Superosa 12) from the digestive gland of scallop M. yessoensis has shown that cadmium is associated with high molecular weight Cd-binding proteins (72 kDa and 43 kDa). The major cadmium-binding protein 72 kDa is glycoprotein. In experiments we have demonstrated that Cd-binding proteins can be induced when there is cadmium exposure. The results of this study strongly suggest that the far eastern scallop Mizuhopecten yessoensis has a unique and well-developed system for the detoxification of heavy metals and it allows for biochemical systems to be maintained in a relatively stable manner in the presence of heavy metals.

  17. UJI TOLERANSI TANAMAN TEMBAKAU (Nicotiana tabacum L. TERHADAP CEKAMAN KADMIUM (Cd, TIMBAL (Pb, DAN TEMBAGA (Cu PADA KULTUR CAIR

    Directory of Open Access Journals (Sweden)

    S Rosidah

    2014-11-01

    Full Text Available Penelitian ini menyelidiki respon fisiologis, anatomis, dan morfologis tanaman tembakau (Nicotiana tabacum L. terhadap cekaman logam berat Cu, Cd, dan Pb. Sampel yang digunakan adalah tembakau umur 3-4 minggu yang dikecambahkan secara in vitro dan kemudian dipapar logam berat selama 14 hari. Desain penelitian yang digunakan yaitu rancangan acak lengkap dengan satu faktor, yaitu konsentrasi logam Cu (0 µM, 50 µM, 100 µM, 150 µM & 200 µM, Cd (0 µM, 50 µM, 100 µM, 200 µM & 300 µM, dan Pb (0 µM, 5 µM, 20 µM, 50 µM & 100 µM. Parameter yang digunakan: pertambahan panjang akar, pertambahan jumlah akar, akumulasi logam dalam akar, lokalisasi penimbunan dalam akar, dan warna daun. Bertambahnya konsentrasi logam menghambat pertumbuhan akar dan menyebabkan deposit logam pada jaringan akar dan gejala klorosis. Hasil uji Atomic Absorbtion Spectrophotometry (AAS menunjukkan semakin besar konsentrasi semakin banyak akumulasi logam pada jaringan akar. Akan tetapi, akumulasi Cd pada konsentrasi 200 µM lebih besar dibanding pada konsentrasi 300 µM. Analisis kualitatif membuktikan bahwa cekaman Cu tidak berpengaruh signifikan terhadap warna daun, sedangkan pada cekaman Cd (100, 150 dan 200 µM dan Pb (150 µM daun mengalami klorosis. Pada konsentrasi logam yang rendah seperti 50 µM Cu, 50 µM Cd, dan 5 µM Pb tidak berbeda nyata dengan kontrol. Dengan demikian disimpulkan bahwa tembakau mampu mentoleransi cekaman logam pada konsentrasi yang rendah.  This research investigated the physiological, anatomical, and morphological responses of tobacco (Nicotiana tabacum L. on stresses of heavy metals Cu, Cd, and Pb. The samples were 3- to 4-week tobacco plants germinated in vitro and then were exposed to heavy metals for 14 days. This study used a completed random design with single factor, i.e. the concentrations of Cu (0 µM, 50 µM, 100 µM, 150 µM & 200 µM, Cd (0 µM, 50 µM, 100 µM, 200 µM & 300 µM, and Pb (0 µM, 5 µM, 20 µM, 50 µM & 100

  18. Atomic and electronic structure of CdTe/metal (Cu, Al, Pt) interfaces and their influence to the Schottky barrier

    Science.gov (United States)

    Odkhuu, Dorj; Miao, Mao-sheng; Aqariden, F.; Grein, Christoph; Kioussis, Nicholas

    2016-11-01

    Schottky barrier heights (SBHs) and other features of the interfaces are determining factors for the performance of the CdTe based high-energy photon detectors. Although known for long time that SBH is sensitive to surface treatment and metal contact growth method, there is a lack of understanding of the effect of the atomic and electronic structures of CdTe/metal interface on the SBH. Employing first-principles electronic structure calculations, we have systematically studied the structural stability and electronic properties of a number of representing structures of Cd Terminated CdTe/metal (Cu, Pt, and Al) interfaces. Comparison of the total energies of the various optimized structural configurations allows to identify the existence of Te-metal alloy formation at the interface. The SBHs of Cu, Pt, and Al metal contacts with a number of stable interface structures are determined by aligning the band edges of bulk CdTe with the Fermi level of the metal/CdTe system. We find that the metal-induced states in the gap play an essential role in determining the SBH.

  19. Growth, crystal structure and optical properties of layered dibarium cadmium diborate, Ba{sub 2}Cd(BO{sub 3}){sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Min [Xinjiang Key Laboratory of Electronic Information Materials and Devices, Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Urumqi 830011 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Pan Shilie, E-mail: slpan@ms.xjb.ac.cn [Xinjiang Key Laboratory of Electronic Information Materials and Devices, Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Urumqi 830011 (China); Han Jian [Xinjiang Key Laboratory of Electronic Information Materials and Devices, Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Urumqi 830011 (China); Yang Yun; Cui Liang [Xinjiang Key Laboratory of Electronic Information Materials and Devices, Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Urumqi 830011 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Zhou Zhongxiang [Xinjiang Key Laboratory of Electronic Information Materials and Devices, Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Urumqi 830011 (China)

    2011-06-09

    Graphical abstract: A new phase, Ba{sub 2}Cd(BO{sub 3}){sub 2}, has been discovered in the ternary M{sub 2}O-CdO-B{sub 2}O{sub 3} (M = alkaline-earth metal) system. The crystal structure is built up from the stacking of infinite stoichiometric layers along the c axis. Display Omitted Highlights: > Ba{sub 2}Cd(BO{sub 3}){sub 2} is the first borate discovered in the ternary M{sub 2}O-CdO-B{sub 2}O{sub 3} (M = alkaline-earth metal) system. > Ba{sub 2}Cd(BO{sub 3}){sub 2} crystal structure includes a two-dimensional infinite stoichiometric layers. > Intrinsic layered structure leads to layered crystal morphology in the process of crystal growth. - Abstract: A novel dibarium cadmium diborate, Ba{sub 2}Cd(BO{sub 3}){sub 2}, has been successfully synthesized by standard solid-state reaction. Large sheet-like crystal with size up to 20 mm x 15 mm x 0.7 mm has been obtained using top-seed solution growth method. Ba{sub 2}Cd(BO{sub 3}){sub 2} crystallizes in the monoclinic space group C2/m with a = 9.6305(4) A, b = 5.3626(3) A, c = 6.5236(2) A, {beta} = 118.079(3){sup o}, Z = 2. The crystal structure is composed of isolated [BO{sub 3}] triangles, [CdO{sub 6}] octahedra and [BaO{sub 9}] polyhedra. CdO{sub 6} are vertex-connected with six BO{sub 3} to form infinite {sub {infinity}}[Cd(BO{sub 3}){sub 2}] layers extending in (0 0 1) plane, and two rows of Ba atoms closely occupy two side of {sub {infinity}}[Cd(BO{sub 3}){sub 2}] layers to forming stoichiometric sheets. IR and transmittance spectrum of Ba{sub 2}Cd(BO{sub 3}){sub 2} were reported.

  20. Cadmium-induced physiological response and antioxidant enzyme changes in the novel cadmium accumulator, Tagetes patula

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yu-Ting; Chen, Zueng-Sang [Department of Agricultural Chemistry, National Taiwan University, Taipei 10617, Taiwan (China); Hong, Chwan-Yang, E-mail: cyhong@ntu.edu.tw [Department of Agricultural Chemistry, National Taiwan University, Taipei 10617, Taiwan (China)

    2011-05-30

    The accumulation and effect of cadmium (Cd) on the growth and enzymatic activities changes of antioxidants in Tagetes patula, French marigold, were investigated to reveal the physiological mechanisms corresponding to its Cd tolerance and accumulation. Hydroponically grown T. patula plants were treated with different concentrations of Cd (0, 10, 25, 50 {mu}M CdCl{sub 2}) at various regime of times. T. patula accumulated Cd to a maximum of 450 mg Cd kg{sup -1} dry weight (DW) in shoot and 3500 mg Cd kg{sup -1} DW in root after 14 days' exposure at 10 and 50 {mu}M CdCl{sub 2}, respectively. The translocation factors of Cd were greater than 1 in plants exposed to 10 {mu}M CdCl{sub 2}. Toxic effects were gradually observed with increasing Cd concentration (25 and 50 {mu}M) accompanied with the reduction of biomass, chlorophyll content, decrease of cell viability and the increase level of lipid peroxidation. In leaves of T. patula, the activities of ascorbate peroxidase (APX), glutathione reductase (GR) and superoxide dismutase (SOD) were induced by Cd. However, in roots, activities of APX, GR, SOD and catalase (CAT) were significantly reduced by 25 and 50 {mu}M Cd treatment but not 10 {mu}M Cd. In-gel zymography analysis revealed that Cd induced the enzymatic activities of APX, MnSOD, CuZnSOD and different isozymes of GR in leaves. These results indicate that T. patula is a novel Cd accumulator and able to tolerate with Cd-induced toxicity by activation of its antioxidative defense system.

  1. Comparative Study of Structural and Photocatalytic Properties of M-Doped (M = Ce3+, Zn2+, Cu2+) Dendritic-Like CdS

    Science.gov (United States)

    Wang, Yongqian; Yang, Xiande; Ye, Ting; Xu, Chao; Xia, Fan; Meng, Dawei

    2017-03-01

    M-doped (M = Ce3+, Zn2+, Cu2+) dendritic-like CdS has been synthesized by a hydrothermal method. As-prepared samples were characterized by x-ray diffraction (XRD) analysis, field-emission scanning electron microscopy (FESEM), energy-dispersive spectroscopy (EDS), and ultraviolet-visible (UV-Vis) spectroscopy. Their photocatalytic activity was evaluated in degradation of methylene blue under simulated visible-light irradiation. XRD results revealed that M:CdS is a hexagonal phase at low doping concentration. XRD and EDS results indicated that Ce3+, Zn2+, and Cu2+ were successfully introduced into CdS. FESEM results indicated that CdS retains dendritic-like structure at low doping concentration. UV-Vis spectroscopy results indicated that doping with Ce3+, Zn2+ or Cu2+ can be used to improve the absorbing capability of dendritic-like CdS for visible light, and the doping content affects the bandgap. Photocatalytic results indicated that doping with Ce3+, Zn2+ or Cu2+ can improve the photocatalytic efficiency of dendritic-like CdS, with highest degradation rates of 93.2%, 91.2%, and 95.5% for Ce:CdS, Zn:CdS, and Cu:CdS, respectively. The photocatalytic mechanism of M:CdS in degradation of methylene blue is also described.

  2. Single crystalline multi-petal Cd nanoleaves prepared by thermal reduction of CdO

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Waheed S. [Research Centre of Materials Science, School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081 (China); National Institute for Biotechnology and Genetic Engineering (NIBGE), P.O. Box No. 577, Jhang Road, Faisalabad (Pakistan); Cao, Chuanbao, E-mail: cbcao@bit.edu.cn [Research Centre of Materials Science, School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081 (China); Aslam, Imran; Ali, Zulfiqar; Butt, Faheem K.; Mahmood, Tariq; Nabi, Ghulam [Research Centre of Materials Science, School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081 (China); Ihsan, Ayesha [National Institute for Biotechnology and Genetic Engineering (NIBGE), P.O. Box No. 577, Jhang Road, Faisalabad (Pakistan); Usman, Zahid [Research Centre of Materials Science, School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081 (China); Rehman, Asma [National Institute for Biotechnology and Genetic Engineering (NIBGE), P.O. Box No. 577, Jhang Road, Faisalabad (Pakistan)

    2013-02-15

    Highlights: ► Cd nanoleaves are obtained on abraded Cu substrate by thermal reduction of CdO. ► Vapour solid (VS) growth mechanism governs the formation of Cd nanoleaves (CdNLs). ► PL spectrum for CdNLs exhibits a strong ultraviolet (UV) emission band at 353 nm. ► UV band is attributed to interband radiative recombination under Xe illumination. -- Abstract: Multi-petal cadmium metal nanoleaves with 30–40 nm thickness were fabricated on abraded copper substrate by simple thermal reduction of cadmium oxide (CdO) powder at 1050 °C inside horizontal tube furnace (HTF) under nitrogen gas flow. The structural, compositional and morphological characterizations of the as-prepared cadmium nanoleaves (CdNLs) were performed by X-ray diffraction, energy dispersive X-ray spectroscopy, scanning electron microscopy, high resolution transmission electron microscopy and selected area electron diffraction. Non-catalytic vapour–solid (VS) process based growth mechanism governing the formation of CdNLs has been proposed and discussed briefly. Photoluminescence (PL) spectrum for CdNLs measured at room temperature exhibited a single prominent emission band at 353 nm which may either be ascribed to surface oxidation effects or interband radiative recombination under Xe light illumination.

  3. Removal of As, Cd, Cu, Ni, Pb, and Zn from a highly contaminated industrial soil using surfactant enhanced soil washing

    Science.gov (United States)

    Torres, Luis G.; Lopez, Rosario B.; Beltran, Margarita

    Surfactant enhanced soil washing (SESW) was applied to an industrial contaminated soil. A preliminary characterization of the soil regarding the alkaline-earth metals, Na, K, Ca and Mg took values of 2866, 2036, 2783 and 4149 mg/kg. The heavy metals As, Cd, Cu, Pb, Ni and Zn, had values of 4019, 14, 35582, 70, 2603, and 261 mg/kg, respectively. When using different surfactants, high removal of Cu, Ni and Zn were found, and medium removals for Pb, As and Cd. In the case of these three metals, tap water removed more than the surfactant solutions, except for the case of As. There were surfactants with average removals (this is, the removal for all the metals studied) of 67.1% (Tween 80), 64.9% (Surfacpol 14104) and 61.2% (Emulgin W600). There were exceptional removals using Texapon N-40 (83.2%, 82.8% and 86.6% for Cu, Ni and Zn), Tween 80 (85.9, 85.4 and 81.5 for Cd, Zn and Cu), Polafix CAPB (79%, 83.2% and 49.7% for Ni, Zn and As). The worst results were obtained with POLAFIX LO with a global removal of 45%, well below of the average removal with tap water (50.2%).All removal efficiencies are reported for a one step washing using 0.5% surfactant solutions, except for the case of mezquite gum, where a 0.1% solution was employed.

  4. The level and bioaccumulation of Cd, Cu, Cr and Zn in benthopelagic species from the Bering Sea

    Institute of Scientific and Technical Information of China (English)

    SHI Ronggui; LIN Jing; YE Yi; MA Yifan; CAI Minggang

    2015-01-01

    The Bering Sea is an area of high biological productivity, with large populations of sea-birds, demersal and pelagic fishes, so it seemed desirable to assess the bioaccumulation of trace metals in the marine organisms from this area. However, few data on trace metal concentrations are available for the benthopelagic organisms from the Bering Sea till now. Ten specimens of benthos (including 120 biological samples) were collected in the western Bering Sea in August 2008 during the 3rd Chinese National Arctic Research Expeditions, and the concentration of Cd, Cu, Cr and Zn determined using atomic absorption spectrometry. Zn, Cr and Cd concentrations in muscle tissues of the crab species were much higher than those from fish and cephalopod species, and the highest concentration of Cu was observed in the muscle tissues ofCylichna nucleoli. The results showed a similar hierarchy for Zn, Cr, Cd and Cu concentrations among different tissues as follows: hepatopancreas>muscle tissue>gonad. Bioconcentration factors indicated that benthic organisms had high accumulation abilities for Zn and Cu.

  5. Preconcentration of Pb(II), Cr(III), Cu(II), Ni(II) and Cd(II) ions in environmental samples by membrane filtration prior to their flame atomic absorption spectrometric determinations

    Energy Technology Data Exchange (ETDEWEB)

    Divrikli, Umit [Pamukkale University, Faculty of Arts and Science, Department of Chemistry, 20020 Denizli (Turkey)]. E-mail: udivrikli@pamukkale.edu.tr; Kartal, Aslihan Arslan [Pamukkale University, Faculty of Arts and Science, Department of Chemistry, 20020 Denizli (Turkey); Soylak, Mustafa [Erciyes University, Faculty of Arts and Science, Department of Chemistry, 38039 Kayseri (Turkey); Elci, Latif [Pamukkale University, Faculty of Arts and Science, Department of Chemistry, 20020 Denizli (Turkey)

    2007-07-16

    A method for separation-preconcentration of Pb(II), Cr(III), Cu(II), Ni(II) and Cd(II) ions by membrane filtration has been described. The method based on the collection of analyte metal ions on a cellulose nitrate membrane filter and determination of analytes by flame atomic absorption spectrometry (FAAS). The method was optimized for several parameters including of pH, matrix effects and sample volume. The recoveries of analytes were generally in the range of 93-100%. The detection limits by 3 sigma for analyte ions were 0.02 {mu}g L{sup -1} for Pb(II), 0.3 {mu}g L{sup -1} for Cr(III), 3.1 {mu}g L{sup -1} for Cu(II), 7.8 {mu}g L{sup -1} for Ni(II) and 0.9 {mu}g L{sup -1} for Cd(II). The proposed method was applied to the determination of lead, chromium, copper, nickel and cadmium in tap waters and RM 8704 Buffalo River Sediment standard reference material with satisfactory results. The relative standard deviations of the determinations were below 10%.

  6. Trace elements concentrations (Zn, Cu, Pb, Cd, As and Hg in the Mediterranean mussel (Mytilus galloprovincialis and evaluation of mussel quality and possible human health risk from cultivated and wild sites of the southeastern Adriatic Sea, Montenegro

    Directory of Open Access Journals (Sweden)

    Jović Mihajlo

    2011-01-01

    Full Text Available The Mediterranean mussel Mytilus galloprovincialis (L was collected from the fall 2005 to the winter 2009 from the six sites on the Montenegrin coastline. Two wild samples were collected from the open sea coastline, and two cultivated and two wild were from the Boka Kotorska Bay. The mussels soft tissue was analyzed for zinc (Zn, copper (Cu, lead (Pb, cadmium (Cd, arsenic (As and total mercury (Hg. Concentrations of these metals ranged from 135.5-210 for Zn, 6.2-14.5 for Cu, 4.0-11.5 for Pb, 1.7-2.1 for Cd, 5.8-12.4 for As and 0.11-0.51 for Hg, in mg kg-1 dry weight. The metals were found to be present in the samples at different levels, but not in concentrations higher than maximum residual levels prescribed by the European Union (EU and US Food and Drug Administration (USFDA regulations for seafood. This indicates that the consumption of wild or cultivated mussels from the studied area is safe in moderate quantities.

  7. Molecular Dynamics Study of Poly And Monocrystalline CdS/CdTe Junctions and Cu Doped Znte Back Contacts for Solar Cell Applications

    Science.gov (United States)

    Aguirre, Rodolfo, II

    Cadmium telluride (CdTe) is a material used to make solar cells because it absorbs the sunlight very efficiently and converts it into electricity. However, CdTe modules suffer from degradation of 1% over a period of 1 year. Improvements on the efficiency and stability can be achieved by designing better materials at the atomic scale. Experimental techniques to study materials at the atomic scale, such as Atomic Probe Tomography (APT) and Transmission Electron Microscope (TEM) are expensive and time consuming. On the other hand, Molecular Dynamics (MD) offers an inexpensive and fast computer simulation technique to study the growth evolution of materials with atomic scale resolution. In combination with advance characterization software, MD simulations provide atomistic visualization, defect analysis, structure maps, 3-D atomistic view, and composition profiles. MD simulations help to design better quality materials by predicting material behavior at the atomic scale. In this work, a new MD method to study several phenomena such as polycrystalline growth of CdTe-based materials, interdiffusion of atoms at interfaces, and deposition of a copper doped ZnTe back contact is established. Results are compared with experimental data found in the literature and experiments performed and shown to be in remarkably good agreement.

  8. Scanning Auger microprobe studies of ball cratered CdS/CuInSe/sub 2/ solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Levenson, L.L.; Burnham, N.A.; Matson, R.J.; Noufi, R.; Kazmerski, L.L.

    1986-05-01

    CdS/CuInSe/sub 2/ solar cell films are typically several micrometers thick. Composition profiles of these films are usually carried out on fracture cross sections by scanning Auger microscopy or by recording Auger spectra during ion milling. For fracture cross sections, the depth resolution depends on the electron beam diameter and the roughness of the fracture surface. Ion milling is time consuming, and artifacts are caused by ion beam faceting. Ball cratering requires only a fraction of an hour and provides significant magnification of the film cross section. There is sufficient contrast, both in optical and electron microscopy, to distinguish between CdS and CuInSe/sub 2/ layers. Auger line scans and point analyses across crater walls have been used to determine composition depth dependence. Artifacts associated with this technique are electron beam damage of CdS and CuInSe/sub 2/ during line scan analysis and smearing of CdS for short distances (approx.1 ..mu..m) along the crater wall during ball cratering.

  9. Photocatalytic removal of M(2+) (Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+) and Ag(+)) over new catalyst CuCrO(2).

    Science.gov (United States)

    Ketir, W; Bouguelia, A; Trari, M

    2008-10-30

    The metal ions M(2+) (Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+) and Ag(+)) are potentially toxic. Their electro deposition has been carried out in aqueous air-equilibrated CuCrO(2) suspension upon visible illumination. The delafossite CuCrO(2) is p-type semiconductor characterized by a low band gap (1.28 eV) and a long-term chemical stability. The corrosion rate is found to be 10(-2) micromol m(-2)month(-1) in aqua regia. The oxide has been elaborated through nitrate route where the specific surface area is increased via the surface/bulk ratio. A correlation exists between the dark M(2+) adsorption, the redox potential of M(2+/0) couple and the conduction band of CuCrO(2) positioned at -1.06 V(SCE). Ag(+) cannot be photoreduced because of its positive potential located far above the valence band. By contrast, Zn(2+) is efficiently deposited due to the large driving force at the interface. The improved photoactivity of copper with a deposition percentage (90%) is attributed to the strong dark adsorption onto the surface catalyst. The results indicate a competitive effect with the water reduction; it has been observed that the M(2+) deposition goes parallel with the hydrogen evolution. Such behavior is attributed to the low H(2) over voltage when ultra fine aggregate of M islands are photodeposited onto CuCrO(2) substrate.

  10. Structural and Photoelectrochemical Properties of Cu-Doped CdS Thin Films Prepared by Ultrasonic Spray Pyrolysis

    Directory of Open Access Journals (Sweden)

    Rui Xie

    2013-01-01

    Full Text Available Cu-doped CdS thin films of variable doping levels have been deposited on indium tin oxide-coated glass substrate by simple and cost-effective ultrasonic spray pyrolysis. The influences of doping concentration and annealing treatment on the structure and photoelectrochemical properties of the films were investigated. The deposited films were characterized by XRD, SEM, and UV-Vis spectra. Moreover, the films were investigated by electrochemical and photoelectrochemical measurements with regard to splitting water for solar energy conversion. The results showed that the Cu impurity can cause a structural change and red shift of absorption edge. It was found that the photocurrent can be improved by the Cu-doping process for the unannealed films under the weak illumination. The unannealed 5 at.% Cu-doped sample obtained the maximum IPCE, which achieved about 45% at 0.3 V versus SCE potential under 420 nm wavelength photoirradiation. In addition, the p-type CdS was formed with a doping of 4 at.%~10 at.% Cu after 450°C 2 h annealed in vacuum.

  11. An Evaluation of Kinetic Parameters of Cadmium and Copper Biosorption by Immobilized Cells

    Directory of Open Access Journals (Sweden)

    Nelly Georgieva

    2007-10-01

    Full Text Available Bioremediation is the use of living organisms to reduce or eliminate environmental hazards resulting from the accumulation of toxic chemicals and other hazardous wastes. This technology is based on the utilization of microorganisms to transform organic and inorganic compounds. The filamentous yeast Trichosporon cutaneum strain R57, immobilized and free cells was cultivated as batch culture on a liquid medium in the presence of various concentrations of cadmium and copper ions. The simultaneous uptake and accumulation of Cd2+ and Cu2+ ions by Tr. cutaneum cells depending on the initial concentration of Cd2+ and Cu2+ in the medium were studied. The potential use of the free and immobilized cells of Trichosporon cutaneum to remove cadmium and copper ions, from aqueous solutions was evaluated. Two important physicochemical aspects for the evaluation of the sorption process as a unit operation are the equilibrium of sorption and the kinetics. The Cd2+ and Cu2+ ions biosorption capacities of all tested adsorbent were presented as a function of the initial concentration of metal ions within the aqueous biosorption medium. The individual, as well as bicomponent sorption kinetics of copper and cadmium ions by immobilised cells of Trichosporon cutaneum R57 is presented. A second order kinetic model obtains kinetic parameters for the copper and cadmium ions.

  12. Bioavailability of adsorbed and coprecipitated Cu, Ni, Pb, and Cd on iron and iron/aluminum hydroxide to Phragmites australis.

    Science.gov (United States)

    Wang, He; Jia, Yongfeng

    2017-01-01

    The bioavailability of heavy metals strongly depends on their speciation in the environment. Adsorption (ADS) and coprecipitation (CPT) on amorphous metal hydroxides are important processes, controlling the fates of heavy metals in an aqueous environment. This work studied the bioavailability of Cu, Cd, Ni, and Pb adsorbed on and/or coprecipitated with amorphous iron and iron/aluminum mixed hydroxides to the wetland plant Phragmites australis. After a 13-day treatment, there was an apparent uptake of the heavy metals by the plant, and the amount of metal bioaccumulation was measurably different for different association forms (ADS vs. CPT). The bioaccumulation of Cd associated with Fe0.5Al0.5(OH)3 was greater than that with Fe(OH)3; the adsorbed metals were found to be more bioavailable than the coprecipitated forms for most of the treatments while the aging treatment significantly reduced the bioaccumulation of ADS metals. In the single metal treatment, root metal concentrations in the Fe(OH)3 ADS system followed the order Ni (68 mg kg(-1)) > Cu (32 mg kg(-1)) > Cd (28 mg kg(-1)) > Pb (9 mg kg(-1)), while the CPT system followed the order of Cu (30 mg kg(-1)) > Ni (22 mg kg(-1)) > Pb (9 mg kg(-1)) > Cd (7 mg kg(-1)). The order of metal accumulation in a combined metal treatment was similar to that for single metal treatments, but observed Ni concentration declines by 22 and 71 % and Cu and Cd concentrations increase by 30 and 50 % (for CPT and ADS treatments, respectively), while Pb concentrations increased by 30~50 % in both of them. When treated with low-molecular-weight organic acids (LMWOAs), metal desorption, indicative of metal oxide bonding strength and metal bioavailability, was consistent with metal accumulation in the plant.

  13. Utilização de pelos de animais silvestres para monitoramento ambiental de Cd, Cr, Cu, Fe, Mn, Pb e Zn Utilization of wild animal hair for the environmental monitoring of Cd, Cr, Cu, Fe, Mn, Pb e Zn

    Directory of Open Access Journals (Sweden)

    Carlos Henrique Hoff Brait

    2009-01-01

    Full Text Available This study investigates the use of wild animal hair of C. brachyurus, C. thous and L. pardalis as biomonitors of trace metal at Parque Nacional das Emas, Brazil. Results reveal a strong correlation between Cd and Pb as well as Cu and Zn, which suggests a single source of emission. Most metals showed a lower or equal concentration than those obtained in previous studies. The research shows that monitoring may be performed only with Zn, Pb, Cd, and Cr because of statistical similarity and of a non-natural occurrence of large amounts of the material under analysis.

  14. Variation of Cd concentration in various rice cultivars and derivation of cadmium toxicity thresholds for paddy soil by species-sensitivity distribution

    Institute of Scientific and Technical Information of China (English)

    SONG Wen-en; CHEN Shi-bao; LIU Ji-fang; CHEN Li; SONG Ning-ning; LI Ning; LIU Bin

    2015-01-01

    It is imperative to derive an appropriate cadmium (Cd) health risk toxicity threshold for paddy soils to ensure the Cd con-centration of rice grains meet the food safety standard. In this study, 20 rice cultivars from the main rice producing areas in China were selected, and a pot-experiment was conducted to investigate transformation of Cd in paddy soil-rice system with 0 (CK), 0.3 mg kg–1 (T1) and 0.6 mg kg–1 (T2) Cd treatments in greenhouse. The results showed that Cd concentrations of rice grains existed signiifcant difference (P<0.05) in 20 rice cultivars under the same Cd level in soil. The Cd concentrations of rice grains of the CK, T1 and T2 treatments were in the range of 0.143–0.202, 0.128–0.458 and 0.332–0.806 mg kg–1, respectively. Marked differences of the ratios of Cd concentration for soil to rice grain (BCFs) and transfer factors (TFs, root to grain and straw to grain) among the tested cultivars were observed in this study. The bioconcentration factors (BCFgrain) and TFs of the 20 rice cultivars were 0.300–1.112 and 0.342–0.817, respectively. The TFs of Cd from straw to grain ranged from 0.366 to 1.71, with signiifcant differences among these 20 rice cultivars. The bioconcentration factors (BCFgrain) and TFs among the 20 rice cultivars ranged from 0.300–1.112 and 0.342–0.817, respectively. The species-sensitivity distribu-tion (SSD) of Cd sensitivity of the rice species could be iftted wel with Burr-III (R2=0.987) based on the data of BCFs. The toxicity threshold of Cd derived from SSD for the paddy soil was 0.507 mg kg–1 in the present study.

  15. Recovery of zinc and cadmium from spent batteries using Cyphos IL 102 via solvent extraction route and synthesis of Zn and Cd oxide nanoparticles.

    Science.gov (United States)

    Singh, Rashmi; Mahandra, Harshit; Gupta, Bina

    2017-09-01

    The overall aim of this study is to separate and recover zinc and cadmium from spent batteries. For this purpose Cyphos IL 102 diluted in toluene was employed for the extraction and recovery of Zn and Cd from Zn-C and Ni-Cd batteries leach liquor. The influence of extractant concentration for the leach liquors of Zn-C (0.01-0.05mol/L) and Ni-Cd (0.04-0.20mol/L) batteries has been investigated. Composition of the leach liquor obtained from Zn-C/Ni-Cd spent batteries is Zn - 2.18g/L, Mn - 4.59g/L, Fe - 4.0×10(-3)g/L, Ni - 0.2×10(-3)g/L/Cd - 4.28g/L, Ni - 0.896×10(-1)g/L, Fe - 0.148g/L, Co - 3.77×10(-3)g/L, respectively. Two stage counter current extraction at A/O 1:1 and 3:2 with 0.04mol/L and 0.2mol/L Cyphos IL 102 for Zn and Cd, respectively provide more than 99.0% extraction of both the metal ions with almost negligible extraction of associated metal ions. A stripping efficiency of around 99.0% for Zn and Cd was obtained at O/A 1:1 using 1.0mol/L HNO3 in two and three counter current stages, respectively. ZnO and CdO were also synthesized using the loaded organic phase and characterized using XRD, FE-SEM and EDX techniques. XRD peaks of ZnO and CdO correspond to zincite and monteponite, respectively. The average particle size was ∼27.0nm and ∼37.0nm for ZnO and CdO, respectively. The EDX analysis of ZnO and CdO shows almost 1:1 atomic percentage. Copyright © 2017. Published by Elsevier Ltd.

  16. Investigation of Pb, Cd, Cu and Mg Concentrations in Groundwater Resources of Razan Plain

    Directory of Open Access Journals (Sweden)

    S. Sobhan Ardakani

    2015-01-01

    Full Text Available Introduction & Objective: Iran is located in the dry and semi dry regions, thus almost 90% of the required fresh water is exploited from groundwater resources. Due to the increasing pol-lution of water resources, the purpose of this study was evaluation of Pb, Cd, Cu and Mg concentrations in groundwater resources of Razan Plain and preparing the zoning map using GIS. Materials & Methods: Groundwater samples were collected from 20 selected stations during two seasons in 2012. The samples were filtered (0.45 ?m and maintained cool in polyethyl-ene bottles. The samples were taken for the analysis of cations, the former was acidified with HNO3 to pH lower than 2. Minor elements were determined using ICP-OES. All statistical analyses were performed using the SPSS statistical package. Also, Kriging Method was used to prepare spatial distribution maps of elements in groundwater samples. Results: The results showed that the mean concentrations of Pb, Cd, Cu and Mg in the groundwater samples during the spring were 5.60±0.66, 0.21±0.04, 32.10±2.21 and 6990.0±302.10 ppb, respectively, and the mean concentrations of these elements in the groundwater samples in the summer were 4.86±0.46, 0.30±0.08, 25.55±3.63 and 3654.05±215.65 ppb, respectively. Comparing the mean concentrations of the evaluated metals with WHO permissible limits showed a significant difference (p<0.05. Thus, the mean concentrations of the metals were significantly lower than the permissible limits. Conclusion: Although the groundwater resources of Razan Plain are not currently polluted with heavy metals, long-term excessive use of agricultural inputs and establishment of pollut-ing industries, can pose a threat to groundwater resources of this area. (Sci J Hamadan Univ Med Sci 2015; 21(4:319-329

  17. [Effects of combined pollution of Cd, Cu and Pb on antioxidant enzyme activities of earthworm in soils].

    Science.gov (United States)

    Wang, Hui; Xie, Xin-Yuan

    2014-07-01

    Recently, soil heavy metal contamination becomes more and more serious in certain areas in China. Adverse effect caused by heavy metals in contaminated soils has been a wide concern for many years. In this study, a bioassay experiment with the earthworm (Eisenia foetida) was conducted to investigate the effects of compound application of Cd, Cu and Pb in soil on surperoxide dismutase (SOD), glutathione S-transferase (GST) and acid phosphatase (AP) activity in earthworms. Through a method of greenhouse soil experiment, this study utilized a uniform design method of three factors and six levels (Cd: 0-15 mg x kg(-1), Cu: 0-175 mg x kg(-1), Pb: 0-600 mg x kg(-1)) to research the physiological property and enrichment characteristics of earthworm in soils with Cd, Cu and Pb compound pollution. The activity of SOD, GST and AP were inhibited significantly under Cd, Cu and Pb compound pollution. And they were impacted by both time and heavy metal contents in the soil. Compared with the control sample, the activity of SOD increased by 7.4% -240.5% in the first eight days under the stress of heavy metals. But owing to the extremely severe stress, it was suppressed and descended by 19.4% -69.7%. Compared with the control sample, the activity of GST increased by 104.3% -217.3% in the first sixteen days under the stress of heavy metals. But owing to the extremely severe stress, it was suppressed and descended by 1.2% - 40.3%. The activity of AP changed over time in a trend of "increase, decrease, increase, decrease". Compared with the control sample, the activity of AP decreased by 9.2% -37.8% in the first eight days, then increased by 37.2% -117.2% in sixteenth days and decreased by 24.3% -34.0% to the last day. The analysis demonstrates that Pb and Cd-Cu-Pb is the dominant factor to the activity of SOD, while Cd and Cu were the dominant factors to the activity of GST and AP.

  18. Frequency dependent capacitance studies of the CdS/Cu2S thin-film solar cell

    Science.gov (United States)

    Hmurcik, L. V.; Serway, R. A.

    1982-05-01

    The dark capacitance of CdS cells has been measured as a function of both bias voltage and operating signal frequency. Results indicate a frequency dependence of the dark current capacitance which can be attributed to deep trapping states in the bulk CdS and at the interface; these states can be characterized by a time constant in the simple relaxation model. Photocapacitance measurements indicate that hole trapping takes place in a narrow region of the i layer near the Cu2S/CdS junction. The results are interpreted in terms of a frequency-dependent model proposed by Schibli and Milnes (1968). It is shown that the simple planar junction model commonly used to describe the CdS cell is accurate at high frequencies.

  19. A study on dependence of the structural, optical and electrical properties of cadmium lead sulphide thin films on Cd/Pb ratio

    Energy Technology Data Exchange (ETDEWEB)

    Nair, Sinitha B., E-mail: sinithanair@gmail.com, E-mail: anithakklm@gmail.com; Abraham, Anitha, E-mail: sinithanair@gmail.com, E-mail: anithakklm@gmail.com; Philip, Rachel Reena, E-mail: reenatara@rediffmail.com [Thin film research Lab, U.C. College, Aluva, Kerala (India); Pradeep, B., E-mail: bp@cusat.ac.in [Solid State Physics Laboratory, Cochin University of science and Technology, Cochin (India); Shripathi, T., E-mail: shri@csr.res.in, E-mail: vganesancsr@gmail.com; Ganesan, V., E-mail: shri@csr.res.in, E-mail: vganesancsr@gmail.com [UGC-DAE CSR, Khandwa Road, Indore, 452001, Madhya Pradesh (India)

    2014-10-15

    Cadmium Lead Sulphide thin films with systematic variation in Cd/Pb ratio are prepared at 333K by CBD, adjusting the reagent-molarity, deposition time and pH. XRD exhibits crystalline-amorphous transition as Cd% exceeds Pb%. AFM shows agglomeration of crystallites of size ∼50±5 nm. EDAX assess the composition whereas XPS ascertains the ternary formation, with binding energies of Pb4f{sub 7/2} and 4f{sub 5/2}, Cd3d{sub 5/2} and 3d{sub 3/2} and S2p at 137.03, 141.606, 404.667, 412.133 and 160.218 eV respectively. The optical absorption spectra reveal the variance in the direct allowed band gaps, from 1.57eV to 2.42 eV as Cd/Pb ratio increases from 0.2 to 2.7, suggesting possibility of band gap engineering in the n-type films.

  20. The high-pressure cadmium borate Cd{sub 6}B{sub 22}O{sub 39} . H{sub 2}O

    Energy Technology Data Exchange (ETDEWEB)

    Sohr, Gerhard; Ciaghi, Nina; Wurst, Klaus; Huppertz, Hubert [Innsbruck Univ. (Austria). Inst. fuer Allgemeine, Anorganische und Theoretische Chemie

    2015-06-01

    Single crystals of the hydrous cadmium borate Cd{sub 6}B{sub 22}O{sub 39} . H{sub 2}O were obtained through a high-pressure/high-temperature experiment at 4.7 GPa and 1000 C using a Walker-type multianvil apparatus. CdO and partially hydrolyzed B{sub 2}O{sub 3} were used as starting materials. A single crystal X-ray diffraction study has revealed that the structure of Cd{sub 6}B{sub 22}O{sub 39} . H{sub 2}O is similar to that of the type M{sub 6}B{sub 22}O{sub 39} . H{sub 2}O (M=Fe, Co). Layers of corner-sharing BO{sub 4} groups are interconnected by BO{sub 3} groups to form channels containing the metal cations, which are six- and eight-fold coordinated by oxygen atoms. The compound crystallizes in the space group Pnma (no. 62) [R1=0.0379, wR2=0.0552 (all data)] with the unit cell dimensions a=1837.79(5), b=777.92(2), c=819.08(3) pm, and V=1171.00(6) Aa{sup 3}. The IR and Raman spectra reflect the structural characteristics of Cd{sub 6}B{sub 22}O{sub 39} . H{sub 2}O.

  1. Protein-Assisted Formation of Molybdenum Heterometallic Clusters: Evidence for the Formation of S2MoS2-M-S2MoS2 Clusters with M = Fe, Co, Ni, Cu, or Cd within the Orange Protein.

    Science.gov (United States)

    Maiti, Biplab K; Maia, Luisa B; Pauleta, Sofia R; Moura, Isabel; Moura, José J G

    2017-02-20

    The Orange Protein (ORP) is a small bacterial protein, of unknown function, that harbors a unique molybdenum/copper (Mo/Cu) heterometallic cluster, [S2Mo(VI)S2Cu(I)S2Mo(VI)S2](3-), noncovalently bound. The apo-ORP is able to promote the formation and stabilization of this cluster, using Cu(II)- and Mo(VI)S4(2-) salts as starting metallic reagents, to yield a Mo/Cu-ORP that is virtually identical to the native ORP. In this work, we explored the ORP capability of promoting protein-assisted synthesis to prepare novel protein derivatives harboring molybdenum heterometallic clusters containing iron, cobalt, nickel, or cadmium in place of the "central" copper (Mo/Fe-ORP, Mo/Co-ORP, Mo/Ni-ORP, or Mo/Cd-ORP). For that, the previously described protein-assisted synthesis protocol was extended to other metals and the Mo/M-ORP derivatives (M = Cu, Fe, Co, Ni, or Cd) were spectroscopically (UV-visible and electron paramagnetic resonance (EPR)) characterized. The Mo/Cu-ORP and Mo/Cd-ORP derivatives are stable under oxic conditions, while the Mo/Fe-ORP, Mo/Co-ORP, and Mo/Ni-ORP derivatives are dioxygen-sensitive and stable only under anoxic conditions. The metal and protein quantification shows the formation of 2Mo:1M:1ORP derivatives, and the visible spectra suggest that the expected {S2MoS2MS2MoS2} complexes are formed. The Mo/Cu-ORP, Mo/Co-ORP, and Mo/Cd-ORP are EPR-silent. The Mo/Fe-ORP derivative shows an EPR S = (3)/2 signal (E/D ≈ 0.27, g ≈ 5.3, 2.5, and 1.7 for the lower M= ±(1)/2 doublet, and g ≈ 5.7 and 1.7 (1.3 predicted) for the upper M = ±(3)/2 doublet), consistent with the presence of either one S = (5)/2 Fe(III) antiferromagnetically coupled to two S = (1)/2 Mo(V) or one S = (3)/2 Fe(I) and two S = 0 Mo(VI) ions, in both cases in a tetrahedral geometry. The Mo/Ni-ORP shows an EPR axial S = (1)/2 signal consistent with either one S = (1)/2 Ni(I) and two S = 0 Mo(VI) or one S = (1)/2 Ni(III) antiferromagnetically coupled to two S = (1)/2 Mo(V) ions, in both

  2. Superior stability of ultra thin CdTe solar cells with simple Cu/Au back contact

    Energy Technology Data Exchange (ETDEWEB)

    Rimmaudo, Ivan; Salavei, Andrei; Xu, Bing Lei; Di Mare, Simone; Romeo, Alessandro, E-mail: alessandro.romeo@univr.it

    2015-05-01

    Due to its high scalability and low production cost, CdTe has shown a significant potential for high mass production, resulting to be one of the cheapest photovoltaic technologies available. Efficiencies exceeding 20% have been obtained by the application of high temperature CdTe deposition. However tellurium scarcity is a limitation for mass production and one of the possibilities to overcome this is the reduction of absorber thickness. We have already demonstrated efficiencies above 11% for devices with 1.5 μm thick CdTe. Nowadays we have fabricated ultra-thin absorber devices performing more than 13% efficiencies. But what is most interesting is that we have observed a different electrical operation and stability, connected to the fact that the depletion region takes a very large part of the device. In this work many CdTe solar cells with a standard Cu/Au back contact, made with different absorber thicknesses, were prepared, stored in dark and tested at different aging times, showing different reactions to the aging and in particular a remarkable stability as CdTe thickness reduces. - Highlights: • CdTe/CdS devices with 0.7, 1 and 1.8 μm thick absorbers have been prepared. • Superior stability in dark aging of ultra thin CdTe devices has been registered. • Electrical analysis shows different behaviors and nature of defects for thin CdTe samples. • For 6 μm CdTe samples degradation is driven mainly by defect compensation. • For ultra thin CdTe samples, degradation is dominated by impurities from the front contact.

  3. Three pyridyl modified Cu(II)/Cd(II)-diphosphonates: Syntheses, crystal structures and properties

    Science.gov (United States)

    Ma, Kui-Rong; Cao, Li; Cong, Ming-Hui; Kan, Yu-He; Li, Rong-Qing

    2017-07-01

    Three examples of M(II)-diphosphonates, [Cu3(H3Lsbnd H)4]·2(OH)·2H2O 1, [Cu3(H2L)2(H2O)2] 2, and [Cd(H2Lsbnd H)]·H2O 3 based on 1-hydroxy-2-(3-pyridyl)ethylidene-1,1-diphosphonic acid (HxL/HxLsbnd H: x = 0-5, H5L = (H4C5N)CH2C(OH)(PO3H2)2, H5L-H = (H4C5Nsbnd H)CH2C(OH)(PO3H2)2), have been hydrothermally obtained and characterized by powder X-ray diffraction, elemental analysis, TG-DSC and IR. The single-crystal X-ray diffractions reveal that compounds 1 and 3 are one-dimensional chain structures (linear for 1 and ladderlike for 3) constructed by binuclear units [M2O2]n, simultaneously organic pyridine-ring suspending both sides, and compound 2 shows a two-dimensional inorganic-organic alternate arrangement layer built from 1-D ladderlike inorganic chain with trinuclear units [Cu3(OPO)4]nvia pyridine-ring linker. The results of electrochemical measurements indicate that both 2 and 3 are significant negatively shifted by 0.17 V and 0.13 V (0.33 V for 2 and 0.37 V for 3), respectively, while 1 was red-shifted by 0.87 V (1.37 V), compared with the ligand H5L (0.50 V). Moreover fluorescent measurements reveal that compounds 1-3 display fluorescent emission bands, 383 nm and 425 nm for 1, 382 nm and 425 nm for 2 and 311 nm, 378 nm and 422.5 nm for 3 (λex = 235 nm), caused by intraligand π*-π emission state of the ligand H5L (λex = 233 nm). Magnetic data indicate that compound 1 exhibits weak ferromagnetic interactions within 1-D linear chain, but compound 2 gives an antiferromagnetic behavior within 1-D ladderlike chain. The energy levels of the frontier molecular orbitals of 1∼3 are obtained from DFT calculations (EHOMO1: -15.23 eV, 2: = -9.74 eV, 3: -11.5 eV), and the low HOMO-LUMO gaps of 1 (0.38 eV), 2 (0.20 eV) and 3 (0.38 eV) mean that high chemical reactivity for three compounds.

  4. Cadmium - is it hazardous

    Energy Technology Data Exchange (ETDEWEB)

    Zartner-Nyilas, G.; Valentin, H.; Schaller, K.H.; Schiele, R.

    1983-01-01

    The report summarizes the state of knowledge and experience on cadmium. Biological, toxicological and epidemiological data have been evaluated. Cd pollution of the environment is reviewed under the aspect of human health. Uptake in food, threshod values of Cd exposure of the population, types and extent of health hazards, possible carcinogenic effects and future fields of research are discussed.

  5. Variation of Cd concentration in various rice cultivars and derivation of cadmium toxicity thresholds for paddy soil by species-sensitivity distribution

    Institute of Scientific and Technical Information of China (English)

    SONG Wen-en[1; CHEN Shi-bao[1; LIU Ji-fang[2; CHEN Li[3; SONG Ning-ning[1; LINing[1; LIU Bin[1

    2015-01-01

    It is imperative to derive an appropriate cadmium (Cd) health risk toxicity threshold for paddy soils to ensure the Cd con- centration of rice grains meet the food safety standard. In this study, 20 rice cultivars from the main rice producing areas in China were selected, and a pot-experiment was conducted to investigate transformation of Cd in paddy soil-rice system with 0 (CK), 0.3 mg kg-1 (T1) and 0.6 mg kg-1(T2) Cd treatments in greenhouse. The results showed that Cd concentrations of rice grains existed significant difference (P〈0.05) in 20 rice cultivars under the same Cd level in soil. The Cd concentrations of rice grains of the CK, T1 and T2 treatments were in the range of 0.143-0.202, 0.128-0.458 and 0.332-0.806 mg kg-1, respectively. Marked differences of the ratios of Cd concentration for soil to rice grain (BCFs) and transfer factors (TFs, root to grain and straw to grain) among the tested cultivars were observed in this study. The bioconcentration factors (BCFgrain) and TFs of the 20 rice cultivars were 0.300-1.112 and 0.342-0.817, respectively. The TFs of Cd from straw to grain ranged from 0.366 to 1.71, with significant differences among these 20 rice cultivars. The bioconcentration factors (BCFgrain) and TFs among the 20 rice cultivars ranged from 0.300-1.112 and 0.342-0.817, respectively. The species-sensitivity distribu- tion (SSD) of Cd sensitivity of the rice species could be fitted well with Burr-Ill (R2=0.987) based on the data of BCFs. The toxicity threshold of Cd derived from SSD for the paddy soil was 0.507 mg kg-1 in the present study.

  6. Forest Soil Pollution with Heavy Metals (Pb, Zn, Cd, and Cu in the Area of the “French Mines” on the Medvednica Mountain, Republic of Croatia

    Directory of Open Access Journals (Sweden)

    Ivan Perković

    2017-01-01

    Full Text Available Background and Purpose: This paper deals with the results of the investigation of the selected heavy metal contents in forest soil in the region of an abandoned mine. The analysis of the forest ecosystem soil on the Medvednica Mountain was conducted in the region of the so-called “French Mines” (FM. The elements selected for analyses were cadmium (Cd, copper (Cu, lead (Pb, and zinc (Zn because of their toxicological characteristics. Material and Methods: In the investigated area - five entrances of the FM - composite topsoil samples (0–5 cm were taken. Those samples were compared to the control samples which were taken outside the area affected by mines. The soil samples were analysed for the following parameters: pH, particle size distribution, organic C content and pseudo-total mass fractions of the selected heavy metals. The heavy metals were determined by atomic emission spectrometry with inductively coupled plasma (ICP-MS. Results and Conclusion: The results reveal that the soil is locally polluted, i.e. the highest mass fraction values of these four heavy metals were found in the area of the FM. Average pseudo-total fraction of Cd in the analysed topsoil samples was in the range of 0.17–4.41 mg·kg−1 (median: 0.97 mg·kg−1. Cu was found in the range of 4.54–1260 mg·kg−1 (median: 45.7 mg·kg−1. In the case of Zn, mass fraction values were found in the range of 36.8–865 mg·kg−1 (median: 137 mg·kg−1. Finally, average values of the pseudo-total fraction of Pb were found in the range of 58.4–12000 mg·kg−1 (median: 238 mg·kg−1. The results reveal that mining activities leave consequences on soil for a long time.

  7. Effects of organic acids on cadmium and copper sorption and desorption by two calcareous soils.

    Science.gov (United States)

    Najafi, Sarvenaz; Jalali, Mohsen

    2015-09-01

    Low molecular weight organic acids (LMWOAs) present in soil alter equilibrium pH of soil, and consequently, affect heavy metal sorption and desorption on soil constitutes. This study was conducted to investigate the effects of different concentrations (0.1, 1, 2.5, 5, 10, 30, 40, 50, 70, and 100 mM) of citric, malic, and oxalic acids on sorption and desorption of cadmium (Cd) and copper (Cu) in two calcareous soils. Increasing the concentrations of three LMWOAs decreased the equilibrium pH of soil solutions. The results indicated that increase in organic acids concentrations generally reduced Cd and Cu sorption in soils. Increase concentrations of LMWOAs generally promoted Cd and Cu desorption from soils. A valley-like curve was observed for desorption of Cu after the citric acid concentration increment in soil 2. Increasing the concentrations of three LMWOAs caused a marked decrease in Kd(sorp) values of Cd and Cu in soils. In general, citric acid was the most effective organic acid in reducing sorption and increasing desorption of both metals, and oxalic acid had the minimal impact. The results indicated that LMWOAs had a greater impact on Cu sorption and desorption than Cd, which can be attributed to higher stability constants of organic acids complexes with Cu compared to Cd. It can be concluded that by selecting suitable type and concentration of LMWOAs, mobility, and hence, bioavailability of heavy metals can be changed. So, environmental implications concerning heavy metals mobility might be derived from these findings.

  8. Magnetic properties of (Zn,Cd,Cu)-Co-Fe-Ti spinel oxides

    Energy Technology Data Exchange (ETDEWEB)

    Moyo, T.; Giordanengo, B.; Melo, M.A.C. de; Takeuchi, A.Y.; Silva, P.R.J.; Saitovitch, H.; Baggio-Saitovitch, E. [University of Natal, Department of Physics (South Africa)

    1999-09-15

    AC susceptibility, magnetization and Moessbauer spectra have been measured for (Zn,Cd,Cu){sup 0.5}Co{sub 0.9}Fe{sub 1.2}Ti{sub 0.4}O{sub 4} and Zn{sub 0.3}Co{sub 0.9}Fe{sub 1.4}Ti{sub 0.4}O{sub 4} spinel oxides. The variation of coercive field below the spin glass transition temperature T{sub sg} is found to fit a double exponential function of the form H{sub c}(T)=H{sub 1e}{sup -{beta}{sub 1}}{sup T}+H{sub 2e}{sup -{beta}{sub 2}}{sup T}, where H{sub i} and {beta}{sub i} are constants. Moessbauer spectra and analysis show superparamagnetic fluctuations associated with magnetic clusters. Symmetric doublets above T{sub sg} are decomposed into quadrupole doublets associated with tetrahedral (A) and octahedral (B) sites.

  9. Kaolinite sorption of Cd, Ni and Cu from landfill leachates: influence of leachate composition.

    Science.gov (United States)

    Petrangeli Papini, M; Majone, M; Rolle, E

    2001-01-01

    Heavy metal speciation in landfill leachates plays a significant role in determining the mobility during the percolation through soils. The complexation characteristics of landfill leachate directly affects heavy metal solubility and the extent of the interaction with soils, lowering or raising the sorbed amount depending on the relative affinity of the complexed metal and uncomplexed form to soil adsorption sites. In this paper, the adsorption of Cd, Ni and Cu onto kaolinite from three leachates (collected from landfill at different fermentation stage) is studied, also in comparison with metal speciation by two different operative procedures. The heavy metals, at their natural concentration, were divided into operational classes according to an exchange-based procedure and by fractionation on the basis of molecular weight (exchange onto Chelex100 resin and ultrafiltration, respectively). All the experiments were performed also on synthetic solutions designed according to leachate composition and theoretical speciation. The experimental results have shown leachate complexing capacity is strongly dependent on landfill age, and that broad parameters such as COD, DOC, pH, ionic strength and VFA concentration are not able to predict it. It is notheworthy that the strong complexing capacity of leachate can cause extraction of metals from the solid phase instead of adsorption from the liquid one.

  10. Junction formation and characteristics of CdS/CuInSe[sub 2]/metal interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ashour, S. (Girls Coll., Science Branch, Riyadh (Saudi Arabia)); Alkuhaimi, S. (Girls Coll., Science Branch, Riyadh (Saudi Arabia)); Moutinho, H. (National Renewable Energy Lab., Golden, CO (United States)); Matson, R. (National Renewable Energy Lab., Golden, CO (United States)); Abou-Elfotouh, F. (National Renewable Energy Lab., Golden, CO (United States))

    1993-04-15

    Polycrystalline thin films of CuInSe[sub 2] (CIS) were prepared by galvanic electrochemical (EC) and physical vapor deposition (PVD) methods and were characterized using high resolution photoluminescence at low temperatures to study defect states, scanning electron microscopy to study surface morphology, and transmission electron microscopy to determine the grain size and individual crystallographic orientation of the grains for possible correlation between the properties of the two films. Metal contacts, Schottky devices in the form of Al/p-CIS, and CdS/p-CIS heterostructures were also prepared. The electrical properties of the resulting interfaces were investigated using current-voltage (I-V) and capacitance-voltage (C-V) characteristics, and by electron-beam-induced current measurements. Devices prepared from PVD films exhibited a higher generation factor G, sharp interfaces and the lowest density of interface states. On the contrary, devices of low G values (made from EC films) showed a much higher density of interface states with a high density of both shallow and deep traps, as detected by deep level transient spectroscopy. The results were used to correlate the resulting variation in the heterojunction characteristics and back contact behavior with the corresponding defect states dominating the CIS. (orig.)

  11. Leachability, availability and bioaccessibility of Cu and Cd in a contaminated soil treated with apatite, lime and charcoal: A five-year field experiment.

    Science.gov (United States)

    Cui, Hongbiao; Fan, Yuchao; Fang, Guodong; Zhang, Houxi; Su, Binbin; Zhou, Jing

    2016-12-01

    This study evaluated the efficiency of apatite, lime and charcoal in regulating Cu and Cd leachability (toxicity characteristic leaching and synthetic precipitation leaching procedures), availability (CaCl2 and MgCl2) and bioaccessibility (simplified bioaccessibility extraction test) in a heavy metal-contaminated soil. Both soil pH and soil organic carbon content were investigated during the five-year field study. The results showed that soil pH and soil organic carbon content increased with application of amendments, but decreased with time in both the control and amended plots. Moreover, the leachability, availability and bioaccessibility of Cu and Cd in amended soils all significantly decreased compared with the control, but increased over time. Pearson's correlation analysis showed that soil pH was significantly negatively correlated with the concentrations of available, leachable and bioaccessible Cu and Cd. Bioaccessible Cu and Cd were positively correlated with the concentrations of available and leachable Cu and Cd, but they were not significantly correlated with soil total Cu and total Cd. Stepwise multiple regression analysis indicated that the variability in bioaccessible Cu and Cd was well explained by MgCl2-extractable Cu, CaCl2-extractable Cd and pH, respectively. Although the longevity of amendments decreased with time, apatite was the most effective in decreasing the availability of Cu, compared with lime and charcoal. These findings provide valuable insights for risk management during long-term in situ immobilization of heavy metals in contaminated soils. Copyright © 2016. Published by Elsevier Inc.

  12. Earthworm Lumbricus rubellus MT-2: Metal Binding and Protein Folding of a True Cadmium-MT

    Directory of Open Access Journals (Sweden)

    Gregory R. Kowald

    2016-01-01

    Full Text Available Earthworms express, as most animals, metallothioneins (MTs—small, cysteine-rich proteins that bind d10 metal ions (Zn(II, Cd(II, or Cu(I in clusters. Three MT homologues are known for Lumbricus rubellus, the common red earthworm, one of which, wMT-2, is strongly induced by exposure of worms to cadmium. This study concerns composition, metal binding affinity and metal-dependent protein folding of wMT-2 expressed recombinantly and purified in the presence of Cd(II and Zn(II. Crucially, whilst a single Cd7wMT-2 species was isolated from wMT-2-expressing E. coli cultures supplemented with Cd(II, expressions in the presence of Zn(II yielded mixtures. The average affinities of wMT-2 determined for either Cd(II or Zn(II are both within normal ranges for MTs; hence, differential behaviour cannot be explained on the basis of overall affinity. Therefore, the protein folding properties of Cd- and Zn-wMT-2 were compared by 1H NMR spectroscopy. This comparison revealed that the protein fold is better defined in the presence of cadmium than in the presence of zinc. These differences in folding and dynamics may be at the root of the differential behaviour of the cadmium- and zinc-bound protein in vitro, and may ultimately also help in distinguishing zinc and cadmium in the earthworm in vivo.

  13. Biosorption of Cu2+, Cd2+, Pb2+, and Zn2+ using dried marine green macroalga Caulerpa lentillifera.

    Science.gov (United States)

    Pavasant, Prasert; Apiratikul, Ronbanchob; Sungkhum, Vimonrat; Suthiparinyanont, Prateep; Wattanachira, Suraphong; Marhaba, Taha F

    2006-12-01

    The sorption of Cu2+, Cd2+, Pb2+, and Zn2+ by a dried green macroalga Caulerpa lentillifera was investigated. The removal efficiency increased with pH. The analysis with FT-IR indicated that possible functional groups involved in metal sorption by this alga were O-H bending, N-H bending, N-H stretching, C-N stretching, C-O, SO stretching, and S-O stretching. The sorption of all metal ions rapidly reached equilibrium within 20min. The sorption kinetics of these metals were governed by external mass transfer and intraparticle diffusion processes. The sorption isotherm followed the Langmuir isotherm where the maximum sorption capacities was Pb2+>Cu2+>Cd2+>Zn2+.

  14. Characterization of CuInSe{sub 2}/CdS thin-film solar cells prepared using CBD

    Energy Technology Data Exchange (ETDEWEB)

    Vidyadharan Pillai, P.K.; Vijayakumar, K.P. [Department of Physics, Cochin University of Science and Technology, Kochi, Kerala (India)

    1997-12-19

    CuInSe{sub 2}/CdS thin-film heterojunction solar cells were fabricated entirely by chemical bath deposition technique. The illuminated J-V characteristics of the devices prepared with different thicknesses of CdS and CuInSe{sub 2} were studied. The typical solar cell parameters obtained for the best cell are: V{sub oc}=365 mV, J{sub sc}=12 mA/cm{sup 2}, FF=61%, and {eta}=3.1% under an illumination of 85 mW/cm{sup 2} on a cell of active area 0.1 cm{sup 2}. The J-V and C-V characteristics under dark condition and the spectral response were also studied for the best cell. The diode quality factor obtained is 1.7

  15. Formation of the physical vapor deposited CdS Cu In,Ga Se2 interface in highly efficient thin film solar cells

    OpenAIRE

    Rusu, M.; Glatzel, Th.; Neisser, A.; Kaufmann, C.A.; Sadewasser, S.; Lux Steiner, M. Ch.

    2006-01-01

    We report on the buffer absorber interface formation in highly efficient 14.5 , AM1.5 ZnO CdS Cu In,Ga Se2 solar cells with a physical vapor deposited CdS buffer. For Se decapped Cu In,Ga Se2 CIGSe absorbers we observe sulfur passivation of the CIGSe grain boundaries during CdS growth and at the interface a thermally stimulated formation of a region with a higher band gap than that of the absorber bulk, determining the height of the potential barrier at the CdS CIGSe interface. For air ex...

  16. Spectral investigations on undoped and Cu²⁺ doped ZnO-CdS composite nanopowders.

    Science.gov (United States)

    Rao, G Thirumala; Babu, B; Stella, R Joyce; Manjari, V Pushpa; Ravikumar, R V S S N

    2015-03-15

    Undoped and Cu(2+) doped ZnO-CdS composite nanopowders were synthesized by simple chemical precipitation method. Structural and spectroscopic properties of the prepared samples have been characterized by XRD, SEM with EDS, TEM, FT-IR, UV-Vis, EPR and Photoluminescence studies. X-ray diffraction pattern contains a series of peaks corresponds to hexagonal phase of ZnO and CdS. The average crystallite sizes of undoped and Cu(2+) doped samples are determined and are in the range of 25-30 nm. SEM and TEM micrographs reveal that the samples show spherical like structures with little agglomeration. FT-IR spectra show the fundamental mode of vibrations of ZnO at 515 cm(-1), CdS at 621 cm(-1) and other functional groups. Optical absorption spectrum of Cu(2+) doped sample consists of three bands at 665, 823 and 1192 nm attributed to the transitions (2)B1g→(2)Eg, (2)B2g and (2)A1g respectively. Crystal field and tetragonal field parameters are evaluated as Dq=1214, Ds=1610 and Dt=389 cm(-1). From EPR, spin-Hamiltonian and hyperfine splitting parameters are evaluated for Cu(2+) doped sample as g‖=2.3391, g⊥=2.0550 and A‖=130×10(-4) cm(-1), A⊥=36×10(-4) cm(-1). The optical and EPR data suggests that Cu(2+) entered into host lattice as tetragonally distorted octahedral site symmetry. PL spectra consists two emission bands at 367, 380 nm in UV region. A sharp blue emission peak at 425 nm and a broad green emission peak in the range of 450-570 nm are observed. The enhanced visible emission is observed after doping.

  17. Synthesis, transport properties, and electronic structure of Cu{sub 2}CdSnTe{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Yongkwan; Khabibullin, Artem R.; Wei, Kaya; Ge, Zhen-Hua; Woods, Lilia M., E-mail: lmwoods@usf.edu; Nolas, George S., E-mail: gnolas@usf.edu [Department of Physics, University of South Florida, Tampa, Florida 33620 (United States); Martin, Joshua [Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899 (United States); Salvador, James R. [Chemical and Materials Systems Laboratory, GM R and D Center, Warren, Michigan 48090 (United States)

    2014-06-23

    A new stannite phase was synthesized and its temperature dependent transport properties were investigated. Cu{sub 2}CdSnTe{sub 4} possesses strong p-type conduction, while the temperature dependence of the thermal conductivity exhibits typical dielectric behavior. Electronic structure calculations allowed for a description of the transport characteristics in terms the energy band structure, density of states, and Fermi surface. The potential for thermoelectric applications is also discussed.

  18. Electronic and structural properties of A Al 2Se 4 ( A=Ag, Cu, Cd, Zn) chalcopyrite semiconductors

    Science.gov (United States)

    Mishra, S.; Ganguli, B.

    2011-07-01

    We have studied the structural and electronic properties of defect chalcopyrite semiconductors A Al 2Se 4 ( A=Ag, Cu, Cd, Zn) using density functional theory (DFT) based first principle technique within tight binding linear muffin-tin orbital (TB-LMTO) method. Our calculated structural parameters such as lattice constants a and c, tetragonal distortion ( η=c/2a) are in good agreement with experimental work. Anion displacement parameters, bond lengths and bulk modulus are also calculated. Our band structure calculation suggests that these compounds are direct band gap semiconductors having band gaps 2.40, 2.50, 2.46 and 2.82 eV for A Al 2Se 4 ( A=Ag, Cu, Cd, Zn) respectively. Calculated band gaps are in good agreement with other experimental and theoretical works within LDA limitation. We have made a quantitative estimation of the effect of p- d hybridization and structural distortion on the electronic properties. The reduction in band gap due to p- d hybridization is 19.47%, 21.29%, 0% and 0.7% for A Al 2Se 4 ( A=Ag, Cu, Cd, Zn) respectively. Increment of the band gap due to structural distortion is 11.62%, 2.45%, 2.92% and 9.30% in case of AgAl 2Se 4, CuAl 2Se 4, CdAl 2Se 4 and ZnAl 2Se 4 respectively. We have also discussed the bond nature of all four compounds.

  19. Effects of Cu2+ and Cd2+ Stress on Growth and POD Activity of Tomato Seedling%Cu2+、Cd2+胁迫对番茄幼苗生长及过氧化物酶活性的影响

    Institute of Scientific and Technical Information of China (English)

    赵迎春

    2008-01-01

    The growth situation and peroxidase (POD) of seedlings of two tomato cuhivars were investigated under the stress of different concentrations of Cu2+ and Cd2+. The toxicity differences of Cu2+ and Cd2+ to tomato seedlings and the corresponding differences between two tomato cultivars were observed through the stress trial with the above two heavy metal ions. The results showed that low concentration of Cu2+ and Cd2+ could promote the growth and could enhance the POD activity of tomato seedlings, while high concentration Cu2+ and Cd2" could inhibit seedling growth and POD activity of tomato seed-lings. Cd2+ functioned more obviously than that of Cu2+, two tomato cultivars also presented difference in response to heavy metal stress.

  20. Removal of Pb(II), Cd(II), Cu(II) and trichloroethylene from water by Nanofer ZVI.

    Science.gov (United States)

    Eglal, Mahmoud M; Ramamurthy, Amruthur S

    2015-01-01

    Zero-valent iron nanoparticle (Nanofer ZVI) is a new reagent due to its unique structure and properties. Images of scanning electron microscopy/electron dispersive spectroscopy (SEM/EDS), transmission electron microscopy and X-ray diffraction revealed that Nanofer ZVI is stable, reactive and has a unique structure. The particles exhibited a spherical shape, a chain-like structure with a particle size of 20 to 100 nm and a surface area between 25-30 m2g(-1). The time interval for particles to agglomerate and settle was between 4-6 h. SEM/EDS Images showed that particle size increased to 2 µm due to agglomeration. Investigation of adsorption and oxidation behavior of Nanofer ZVI used for the removal of Cu(II), Pb(II), Cd(II) ions and trichloroethylene (TCE) from aqueous solutions showed that the optimal pH for Pb(II), Cu(II), Cd(II) and TCE removal were 4.5 and 4.8, 5.0 and 6.5, respectively. Test data were used to form Langmuir and Freundlich isotherms. The maximum contaminant loading was estimated as 270, 170, 110, 130 mg per gram of Nanofer ZVI for Cu(II), Pb(II), Cd(II) and TCE respectively. Removal of metal ions is interpreted in terms of their hydrated ionic radii and their electronegativity. TCE oxidation followed the dechlorination pathway resulting in nonhazardous by-products.

  1. Studies of biosorption of Pb2+, Cd2+ and Cu2+ from aqueous solutions using Adansonia digitata root powders.

    Science.gov (United States)

    Ekere, N R; Agwogie, A B; Ihedioha, J N

    2016-01-01

    The potentials of Adansonia digitata root powders (ADRP) for adsorption of Pb(2+), Cd(2+) and Cu(2+) from aqueous solutions was investigated. Physico-chemical analysis of the adsorbent (ADRP) shows that hydroxyl, carbonyl and amino groups were predominant on the surface of the adsorbent. Scanning Electron Microscope (SEM) image revealed its high porosity and irregular pores in the adsorbent while the Energy Dispersive X-ray Spectrum showed the major element with 53.0% Nitrogen, 23.8% carbon, 9.1% calcium, 7.5% potassium and 6.6% magnesium present. The found optimal conditions were: initial concentration of the metal ions = 0.5 mg/L, pH = 5, contact time = 90 min, adsorbent dose = 0.4 g and particle size = 32 µm. Freundlich isotherm showed good fit for the adsorption of Pb(2+), Cd(2+) and Cu(2+). Dubinin-Radushkevich isotherm revealed that the adsorption processes were physisorption Cd(II) and Cu(II) but chemisorption with respect to Pb(II) ions. The kinetics and thermodynamic studies showed that Pseudo-second order and chemisorptions provided the best fit to the experimental data of Pb (II) ions only. Batch desorption result show that desorption in the acidic media for the metal ions were more rapid and over 90% of the metal ions were recovered from the biomass.

  2. Amount and metal composition of midgut gland metallothionein in shore crabs (Carcinus maenas) after exposure to cadmium in the food

    Energy Technology Data Exchange (ETDEWEB)

    Pedersen, Knud Ladegaard; Bach, Louise Thornhøj; Bjerregaard, Poul, E-mail: poul@biology.sdu.dk

    2014-05-01

    Highlights: • Crabs were fed with Cd in concentrations of 1.1–5.1 μg g⁻¹ food. • Metallothionein concentrations only increased at 5.1 μg g⁻¹. • Cd contents of metallothionein increased linearly with exposure. • A marked influence by the variable Cu contents on metal composition was recorded. • Digestive gland metallothionein is a poor biomarker for Cd exposure. - Abstract: Accumulation of cadmium in aquatic invertebrates may compromise human food safety and anthropogenic additions of cadmium to coastal areas cause concern. Induction of crustacean metallothionein has been suggested as a useful biomarker for contamination of the aquatic environment with cadmium. We investigated how exposure to low concentrations of cadmium in the food affects the subcellular binding of cadmium with the shore crab Carcinus maenas as model organism. Approximately 80% of the assimilated cadmium was bound in the soluble fraction of the midgut gland and of this, 82% was found in the metallothionein fraction. Metallothionein synthesis was only induced at the highest exposure level. However, the number of cadmium atoms bound per molecule of metallothionein increased linearly with exposure, from approximately 0.18 in the control group to 1.4 in a group administered food containing 5.1 μg Cd g⁻¹. We noted a marked interaction between the presence of copper and zinc in the midgut gland and the binding of cadmium. The usefulness of crustacean midgut gland metallothionein as a biomarker for cadmium exposure at modest levels was questioned since exposures at levels producing significant increases in the tissue contents of the metal did not result in elevated concentrations of metallothionein in the midgut gland.

  3. Phytochelatins as biomarkers for heavy metal stress in maize (Zea mays L.) and wheat (Triticum aestivum L.): combined effects of copper and cadmium.

    NARCIS (Netherlands)

    Keltjens, W.G.; Beusichem, van M.L.

    1998-01-01

    Abstract

    Heavy metal contaminated soils often show increased levels of more than one metal, e.g. copper (Cu), cadmium (Cd), zinc (Zn), lead (Pb) or nickel (Ni). In case such soils are used for crop production, prediction of yield reduction or quality decline due to heavy metals in the soil

  4. CADMIUM – ENVIRONMENTAL HAZARD

    Directory of Open Access Journals (Sweden)

    Henryka Langauer-Lewowicka

    2010-06-01

    Full Text Available The paper presents some information about current status of cadmium as an environmental health problem. Agricultural uses of phosphate fertilizers, sewage sludge and industrial uses of Cd are the major source of widespread of this metal at trace levels into the general environment and human foodstuffs. It is well known that high cadmium (Cd exposure causes renal damage, anemia, enteropathy, osteoporosis, osteomalacia, whereas the dose-response relationship at low levels exposure is less established. During the last decade an increasing number of studies have found an adverse health effects due to low environmental exposure to Cd. Many authors try to determine the relationship between Cd intake and Cd toxicity indicators, especially dealing renal tubular damage. The level of b2-microglobulin in urine is regarded as the most sensitive biomarker of renal disfunction due to low environmental Cd concentrations.

  5. Magnetic dilution in the cadmium-doped spin ladder compound Cdx Cu1 - x (quinoxaline) Br2

    Science.gov (United States)

    Keith, Brian; Landee, Chris; Turnbull, Mark

    2011-03-01

    Both Cu (quinoxaline) (Br2) and Cu (quinoxaline) (Cl2) are examples of molecule-based magnets where the CuX4 dimers are linked into ladders by quinoxaline molecules, where X is either Cl or Br. The rung exchange occurs through the bridging halides while the rail exchange occurs through the quinoxaline rings. Introducing random rung interactions into the system [ Cu (quinoxaline) (Br2)1-x (Cl2)x ] has caused the spin gap to close, in contrast with the gapped pure spin ladder parents. Crystal growth of non-magnetic-doped molecular magnets, CdxCu1 - x (2 , 3 - dimethylpyrazine)Br2 , have been performed for several values of the nominal conentration, x, and have been confirmed. The magnetizations and susceptibilities of the magnetically diluted ladder assemblage are presented along with a comparison of the effects of dilution from the pure case (x=0).

  6. Fabrication of p-type SrCuSeF/n-type In2O3:Sn bilayer ohmic tunnel junction and its application to the back contact of CdS/CdTe solar cells

    Science.gov (United States)

    Kitabayashi, Shuya; Shiina, Yasuyoshi; Murata, Ayuki; Okamoto, Tamotsu; Wada, Takahiro

    2017-08-01

    To develop polycrystalline thin-film tandem solar cells, a SrCuSeF/In2O3:Sn (ITO) bilayer film was studied. The transparent p-type conductive SrCuSeF layer was deposited by pulsed laser deposition (PLD), and the n-type conductive ITO layer was deposited by RF sputtering. The SrCuSeF/ITO bilayer film showed ohmic I-V characteristics. A tunnel junction between the p-type SrCuSeF and n-type ITO layers was successfully formed because the p-type SrCuSeF and the n-type ITO layers had sufficiently high carrier concentrations. The SrCuSeF/ITO bilayer film was applied as the back contact of a CdS/CdTe solar cell. The photovoltaic performance of the CdS/CdTe solar cell depends considerably on the thickness of the SrCuSeF layer. The CdTe solar cell with a back contact of the SrCuSeF layer with a thickness of 34 nm and the ITO layer with a thickness of 200 nm showed a high conversion efficiency of 14.3% (V OC = 804 mV, J SC = 27.5 mA/cm2, and FF = 0.65). The conversion efficiency was much higher than that of the CdTe solar cell with the SrCuSeF single-layer back contact (11.6%) and that of the CdTe cell with the ITO single-layer back contact (2.75%).

  7. Synthesis and Crystal Structure of Dinuclear Cadmium Complex [Cd2(phen)4(fca)2](ClO4)2·(H2O)2

    Institute of Scientific and Technical Information of China (English)

    YANG Jia-Xiang; ZHANG Ze; WU Jie-Ying; TIAN Yu-Peng; DU Peng; LIU Qing-Liang; FUN Hoong Kun; C. Suchada

    2003-01-01

    A novel complex [Cd2(phen)4(fca)2](ClO4)2((H2O)2 (fca = dianion of 3-ferrocenyl- 2-crotonic acid, phen = 1,10-phenanthroline) has been synthesized and characterized by X-ray single-crystal structure analysis. It crystallizes in triclinic system, space group Pī with a = 11.6297(5), b = 12.5165(5), c = 13.8986(6) A, α = 63.345(1), β = 87.747(1), γ = 71.862(1)°, V = 1706.20(1) A3, Z = 1, Dc = 1.673 g/cm3, F(000) = 868 and μ(MoKα) = 1.185 mm-1 (λ = 0.71073 A). R = 0.0800 and Wr = 0.1793 for 7653 observed reflections (I > 2σ(I)). The structure consists of a dinuclear cation [Cd2(phen)4(fca)2]2+, two discrete perchlorate anions and two water molecules. The cationic part of the complex shows a tetrametallic core in which two fca groups act as the (O, O') bridging ligands between two cadmium(Ⅱ) ions with a distorted octahedral environment. The Cd…Cd intradimer distance is 4.128 A.

  8. Speciation of Dissolved Cadmium

    DEFF Research Database (Denmark)

    Holm, Peter Engelund; Andersen, Sjur; Christensen, Thomas Højlund

    1995-01-01

    Equilibrium dialysis and ion exchange methods, as well as computer calculations (GEOCHEM), were applied for speciation of dissolved cadmium (Cd) in test solutions and leachate samples. The leachate samples originated from soil, compost, landfill waste and industrial waste. The ion exchange (IE...... leachates showed different Cd speciation patterns as expected. Some leachates were dominated by free divalent Cd (1-70%), some by inorganic complexes (1-87%), and some by organic complexes (7-98%)....

  9. Double-Sided Transparent TiO2 Nanotube/ITO Electrodes for Efficient CdS/CuInS2 Quantum Dot-Sensitized Solar Cells.

    Science.gov (United States)

    Chen, Chong; Ling, Lanyu; Li, Fumin

    2017-12-01

    In this paper, to improve the power conversion efficiencies (PCEs) of quantum dot-sensitized solar cells (QDSSCs) based on CdS-sensitized TiO2 nanotube (TNT) electrodes, two methods are employed on the basis of our previous work. First, by replacing the traditional single-sided working electrodes, double-sided transparent TNT/ITO (DTTO) electrodes are prepared to increase the loading amount of quantum dots (QDs) on the working electrodes. Second, to increase the light absorption of the CdS-sensitized DTTO electrodes and improve the efficiency of charge separation in CdS-sensitized QDSSCs, copper indium disulfide (CuInS2) is selected to cosensitize the DTTO electrodes with CdS, which has a complementary property of light absorption with CdS. The PCEs of QDSSCs based on these prepared QD-sensitized DTTO electrodes are measured. Our experimental results show that compared to those based on the CdS/DTTO electrodes without CuInS2, the PCEs of the QDSSCs based on CdS/CuInS2-sensitized DTTO electrode are significantly improved, which is mainly attributed to the increased light absorption and reduced charge recombination. Under simulated one-sun illumination, the best PCE of 1.42% is achieved for the QDSSCs based on CdS(10)/CuInS2/DTTO electrode, which is much higher than that (0.56%) of the QDSSCs based on CdS(10)/DTTO electrode.

  10. CdS quantum dots modified CuO inverse opal electrodes for ultrasensitive electrochemical and photoelectrochemical biosensor.

    Science.gov (United States)

    Xia, Lei; Xu, Lin; Song, Jian; Xu, Ru; Liu, Dali; Dong, Biao; Song, Hongwei

    2015-06-04

    The CuO inverse opal photonic crystals (IOPCs) were synthesized by the sol-gel method and modified with CdS quantum dots by successive ionic layer adsorption and reaction (SILAR). CdS QDs modified CuO IOPCs FTO electrodes of different SILAR cycles were fabricated and their electrochemical properties were studied by cyclic voltammetry (CV) and chronoamperometry (I-t). Structure and morphology of the samples were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), high-resolution TEM (HRTEM), Energy-dispersive X-ray analysis (EDX) and X-ray diffraction pattern (XRD). The result indicated that the structure of IOPCs and loading of CdS QDs could greatly improve the electrochemical properties. Three SILAR cycles of CdS QDs sensitization was the optimum condition for preparing electrodes, it exhibited a sensitivity of 4345 μA mM(-1) cm(-2) to glucose with a 0.15 μM detection limit (S/N= 3) and a linear range from 0.15 μM to 0.5 mM under a working potential of +0.7 V. It also showed strong stability, good reproducibility, excellent selectivity and fast amperometric response. This work provides a promising approach for realizing excellent photoelectrochemical nonenzymatic glucose biosensor of similar composite structure.

  11. CdS quantum dots modified CuO inverse opal electrodes for ultrasensitive electrochemical and photoelectrochemical biosensor

    Science.gov (United States)

    Xia, Lei; Xu, Lin; Song, Jian; Xu, Ru; Liu, Dali; Dong, Biao; Song, Hongwei

    2015-01-01

    The CuO inverse opal photonic crystals (IOPCs) were synthesized by the sol-gel method and modified with CdS quantum dots by successive ionic layer adsorption and reaction (SILAR). CdS QDs modified CuO IOPCs FTO electrodes of different SILAR cycles were fabricated and their electrochemical properties were studied by cyclic voltammetry (CV) and chronoamperometry (I–t). Structure and morphology of the samples were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), high-resolution TEM (HRTEM), Energy-dispersive X-ray analysis (EDX) and X-ray diffraction pattern (XRD). The result indicated that the structure of IOPCs and loading of CdS QDs could greatly improve the electrochemical properties. Three SILAR cycles of CdS QDs sensitization was the optimum condition for preparing electrodes, it exhibited a sensitivity of 4345 μA mM-1 cm-2 to glucose with a 0.15 μM detection limit (S/N= 3) and a linear range from 0.15 μM to 0.5 mM under a working potential of +0.7 V. It also showed strong stability, good reproducibility, excellent selectivity and fast amperometric response. This work provides a promising approach for realizing excellent photoelectrochemical nonenzymatic glucose biosensor of similar composite structure. PMID:26042520

  12. Removal of Cu, Cr, Ni, Zn, and Cd from electroplating wastes and synthetic solutions by vermicompost of cattle manure.

    Science.gov (United States)

    Jordão, Cláudio Pereira; Pereira, Madson de Godoi; Einloft, Rosilene; Santana, Marlete Bastos; Bellato, Carlos Roberto; de Mello, Jaime Wilson Vargas

    2002-01-01

    This study was undertaken to evaluate the retention of Cu, Cr, Ni, Zn, and Cd under laboratory conditions from synthetic solution and electroplating wastes by vermicompost. A glass column was loaded with vermicompost, and metal solutions were passed through it. Metal concentrations were then measured in the eluate in order to evaluate the amounts retained by the vermicompost. Measurements of pH, metal concentrations, moistness, organic matter and ash contents, and infrared and XRD spectroscopy were used for vermicompost characterisation. Vermicompost residues obtained from this process were used for plant nutrition in eroded soil collected from a talus near a highway. Metal retention (in g of metal/kg of vermicompost) from effluents ranged from 2 for Cr and Zn to 4 in the case of Ni. In synthetic solutions, the values for metal retention were 4 for Cd and Zn, 6 for Cu and Ni, and 9 for Cr. The results also showed that metal concentrations in the purified effluents were below the maximum values established for waste discharges into rivers by the Brazilian Environmental Standards. The relatively high available Cd concentration of the vermicompost residue resulted in plant damage. This effect was attributed to the presence of Cd in the synthetic solution passed through the vermicompost. The data obtained do not give a complete picture of using vermicompost in cultivated lands, but such values as are determined do show that it can be suitable to remove heavy metals from industrial effluents.

  13. Water Soluble Cationic Porphyrin Sensor for Detection of Hg2+, Pb2+, Cd2+, and Cu2+

    Directory of Open Access Journals (Sweden)

    Matibur Zamadar

    2016-01-01

    Full Text Available Here we report the sensing properties of the aqueous solution of meso-tetra(N-methyl-4-pyridylporphine tetrachloride (1 for simultaneous detection of toxic metal ions by using UV-vis spectroscopy. Cationic porphyrin 1 displayed different electronic absorptions in UV-vis region upon interacting with Hg2+, Pb2+, Cd2+, and Cu2+ ions in neutral water solution at room temperature. Quite interestingly, the porphyrin 1 showed that it can function as a single optical chemical sensor and/or metal ion receptor capable of detecting two or more toxic metal ions, particularly Hg2+, Pb2+, and Cd2+ ions coexisting in a water sample. Porphyrin 1 in an aqueous solution provides a unique UV-vis sensing system for the determination of Cd2+ in the presence of larger metal ions such as Hg2+, or Pb2+. Finally, the examination of the sensing properties of 1 demonstrated that it can operate as a Cu2+ ion selective sensor via metal displacement from the 1-Hg2+, 1-Pb2+, and 1-Cd2+.

  14. Synthesis of Co-Doped CdS Nanocrystals by Direct Thermolysis of Cadmium and Cobalt Thiolate Clusters

    Directory of Open Access Journals (Sweden)

    Jianing Zhao

    2015-01-01

    Full Text Available Co-doped CdS (Co:CdS nanocrystals with controllable morphology (quantum dots and nanorods were easily synthesized by direct thermolysis of (Me4N2[Co4(SC6H510] and (Me4N4[S4Cd10(SPh16] under different precursor concentration, in virtue of the ions exchange of molecular clusters. The Co:CdS quantum dots were produced under low precursor concentration, and the Co:CdS nanorods could be obtained under higher precursor concentration. The Co-doping effect on the structure, growth process, and property of CdS nanocrystals was also investigated. The results indicated that the Co-doping was favorable for the formation of the nanorod structures for a short reaction time. In addition, the Co-doping in the CdS lattice resulted in the ferromagnetic property of the Co:CdS quantum dots at room temperature. Moreover, compared with the CdS quantum dots, the Co:CdS quantum dots exhibited obvious quantum confinement effect and photoluminescence emission with slightly red-shift.

  15. Role of microbial inoculation and chitosan in phytoextraction of Cu, Zn, Pb and Cd by Elsholtzia splendens--a field case.

    Science.gov (United States)

    Wang, Fa Yuan; Lin, Xian Gui; Yin, Rui

    2007-05-01

    A field experiment was carried out to study the effect of microbial inoculation on heavy metal phytoextraction by Elsholtzia splendens and whether chitosan could have a synergistic effect with the microbial inocula. The microbial inocula consisted of a consortium of arbuscular mycorrhizal fungi and two Penicillium fungi. Three treatments were included: the control, inoculation with microbial inocula, and the inoculation combined with chitosan. Microbial inoculation increased plant biomass especially shoot dry weight, enhanced shoot Cu, Zn and Pb concentrations but did not affect Cd, leading to higher shoot Cu, Zn, Pb and Cd uptake. Compared with microbial inoculation alone, chitosan application did not affect plant growth but increased shoot Zn, Pb and Cd concentrations except Cu, which led to higher phytoextraction efficiencies and partitioning to shoots of Zn, Pb and Cd. These results indicated synergistic effects between microbial inocula and chitosan on Zn, Pb and Cd phytoextraction.

  16. CdS: Characterization and recent advances in CdTe solar cell performance

    Energy Technology Data Exchange (ETDEWEB)

    Ferekides, C.; Marinskiy, D.; Morel, D.L. [Univ. of South Florida, FL (United States)

    1997-12-31

    Cadmium sulfide (CdS) films deposited by chemical bath deposition (CBD) have been used for the fabrication of high efficiency CdTe and CuIn{sub 1{minus}x}Ga{sub x}Se{sub 2} thin film solar cells. An attractive alternative deposition technology with manufacturing advantages over the CBD is the close spaced sublimation (CSS). In this work CdTe/CdS solar cells prepared entirely by the CSS process exhibited 15.0% efficiencies under global AM1.5 conditions as verified at the National Renewable Energy Laboratory. This paper reports on studies carried out on as deposited and heat treated CSS CdS films and all CSS CdTe/CdS solar cells using photoluminescence, x-ray diffraction, and I-V-T measurements.

  17. Migration of constituent atoms and interface morphology in a heterojunction between CdS and CuInSe{sub 2} single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Soo, Y.L.; Huang, S.; Kao, Y.H. [Department of Physics, State University of New York at Buffalo, Amherst, New York, 14260 (United States); Deb, S.K.; Ramanathan, K. [National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, Colorado 80401 (United States); Takizawa, T. [Nihon University (Japan)

    1999-12-01

    Angular dependence of x-ray fluorescence (ADXRF), x-ray absorption fine structure (XAFS), and grazing incidence x-ray scattering measurements were carried out using synchrotron radiation for a study of the interface morphology and migration of constituent atoms in a heterojunction formed between CdS and CuInSe{sub 2} single crystals. The advantage of using a single crystal for this study is to avoid the usually complicated problems arising from multiple phases of the Cu{endash}In{endash}Se compounds. By a comparison of the results obtained with a bare CuInSe{sub 2} single crystal, the changes of interface microstructures in the CdS/CuInSe{sub 2} heterojunction system with {ital well-defined stoichiometry} can therefore be investigated. Prominent features in the ADXRF data clearly demonstrate that both Cu and Se atoms have migrated into the CdS layer in the heterojunction while In atoms remain intact in the CuInSe{sub 2} single crystal. The local structures around Cu in the system also show a significant change after the deposition of CdS, as manifested by the appearance of new Cd near neighbors in the XAFS spectra. {copyright} {ital 1999 American Institute of Physics.}

  18. Adsorption of Cd(II), Cu(II) and Ni(II) ions by cross-linking chitosan/rectorite nano-hybrid composite microspheres.

    Science.gov (United States)

    Zeng, Lixuan; Chen, Yufei; Zhang, Qiuyun; Guo, Xingmei; Peng, Yanni; Xiao, Huijuan; Chen, Xiaocheng; Luo, Jiwen

    2015-10-05

    Chitosan/rectorie (CTS/REC) nano-hybrid composite microsphere was prepared by changing the proportion of CTS/REC with 2:1, 3:1 and 4:1. Compared with the pure cross-linking chitosan microsphere, the nano-hybrid composite microsphere was proved to have better sorption capacity of Cd(II), Cu(II) and Ni(II), especially 2:1(CTS/REC-1). The adsorption behavior of the microsphere of Cd(II), Cu(II) and Ni(II) was investigated in single and binary metal systems. In single system, the equilibrium studies showed that the adsorption of Cd(II), Cu(II) and Ni(II) followed the Langmuir model and the pseudo-second-order kinetic model. The negative values of (ΔG) suggested that the adsorption process was spontaneous. In binary system, the combined action of the metals was found to be antagonistic and the metal sorption followed the order of Cu(II)>Cd(II)>Ni(II). The regeneration studies indicated that EDTA desorbed Cd(II), Cu(II) and Ni(II) from cross-linking microspheres better than HCl. The FT-IR and XPS spectra showed that coordination bonds were formed between Cd(II), Cu(II) and Ni(II) and the nitrogen atoms of cross-linking CTS/REC nano-hybrid composite microspheres.

  19. Isolation and characterization of heavy-metal-mobilizing bacteria from contaminated soils and their potential in promoting Pb, Cu, and Cd accumulation by Coprinus comatus.

    Science.gov (United States)

    Jing, Xiao-Bing; He, Nan; Zhang, Ying; Cao, Yan-Ru; Xu, Heng

    2012-01-01

    The enhanced effect of heavy-metal-mobilizing bacteria on the uptake of Pb, Cu, and Cd by Coprinus comatus from Pb-, Cu-, and Cd-multicontaminated soil was assessed in this study. Thirteen strains, tolerating 800 mg·L(-1) Pb, 200 mg·L(-1) Cu, and 200 mg·L(-1) Cd simultaneously were selected for heavy-metal-solubilizing experiments in soil. The mobilization of heavy metals depended on the characteristics of bacteria and heavy metals. Correlation analysis demonstrated that for Pb solubilization, the acid-producing ability was the most significant factor, while for Cu and Cd, siderophores played a leading role in this process. Four strains, based on their excellent ability to solubilize heavy metal in soil, were applied in pot experiments. The results showed that all strains can promote the growth of C. comatus and meanwhile help mushroom accumulate more heavy metals (Pb, Cd, and Cu). The maximum uptake for total Pb and Cu by C. comatus was observed in inoculations with Bacillus sp. strain JSG1 (2.02- and 2.13-fold, respectively, compared with uninoculated soil), while for Cd, it was recorded in Bacillus sp. strain PB2 treated soil (2.03-fold). Therefore, this work suggests that the mushroom-bacteria interaction can be developed into a novel bioremediation strategy.

  20. Square-wave anodic-stripping voltammetric determination of Cd, Pb, and Cu in a hydrofluoric acid solution of siliceous spicules of marine sponges (from the Ligurian Sea, Italy, and the Ross Sea, Antarctica)

    Energy Technology Data Exchange (ETDEWEB)

    Truzzi, C.; Annibaldi, A.; Illuminati, S.; Bassotti, E.; Scarponi, G. [Polytechnic University of Marche, Ancona (Italy). Department of Marine Science

    2008-09-15

    Square-wave anodic-stripping voltammetry (SWASV) was set up and optimized for simultaneous determination of cadmium, lead, and copper in siliceous spicules of marine sponges, directly in the hydrofluoric acid solution ({proportional_to}0.55 mol L{sup -1} HF, pH {proportional_to}1.9). A thin mercury-film electrode (TMFE) plated on to an HF-resistant epoxy-impregnated graphite rotating-disc support was used. The optimum experimental conditions, evaluated also in terms of the signal-to-noise ratio, were as follows: deposition potential -1100 mV vs. Ag/AgCl, KCl 3 mol L{sup -1}, deposition time 3-10 min, electrode rotation 3000 rpm, SW scan from -1100 mV to +100 mV, SW pulse amplitude 25 mV, frequency 100 Hz, {delta}E{sub step} 8 mV, t{sub step} 100 ms, t{sub wait} 60 ms, t{sub delay} 2 ms, t{sub meas} 3 ms. Under these conditions the metal peak potentials were Cd -654{+-}1 mV, Pb -458 {+-} 1 mV, Cu -198{+-}1 mV. The electrochemical behaviour was reversible for Pb, quasi-reversible for Cd, and kinetically controlled (possibly following chemical reaction) for Cu. The linearity of the response with concentration was verified up to {proportional_to}4 {mu}g L{sup -1} for Cd and Pb and {proportional_to}20 {mu}g L{sup -1} for Cu. The detection limits were 5.8 ng L{sup -1}, 3.6 ng L{sup -1}, and 4.3 ng L{sup -1} for Cd, Pb, and Cu, respectively, with t{sub d}=5 min. The method was applied for determination of the metals in spicules of two specimens of marine sponges (Demosponges) from the Portofino natural reserve (Ligurian Sea, Italy, Petrosia ficiformis) and Terra Nova Bay (Ross Sea, Antarctica, Sphaerotylus antarcticus). The metal contents varied from tens of ng g{sup -1} to {proportional_to}1 {mu}g g{sup -1}, depending on the metal considered and with significant differences between the two sponge species. (orig.)

  1. Interface properties of (Cd,Zn)S/CuInSe/sub 2/ single-crystal solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Abou-Elfotouh, F.A.; Kazmerski, L.L.; Coutts, T.J.; Matson, R.J.; Asher, S.E.; Nelson, A.J.; Swartzlander-Franz, A.B.

    1989-05-01

    Metal contacts to p-type CuInSe/sub 2/ and heterojunctions of the form n-(CdZn)S/p-CuInSe/sub 2/ have been prepared, to investigate the electrical behavior and chemical composition of the resulting interfaces and to correlate the results with the composition and corresponding electrical properties of CuInSe/sub 2/ . The results indicate that the observed variability of the back contacts and front junctions of different CuInSe/sub 2/ samples can be attributed to the variable initial equilibrium concentration of the intrinsic defect states which dominate the crystals. The type and concentration of the dominant defects can be changed by thermal treatments and by interface induced effects due to the junction electric field and the chemical potential gradients. Diffusion into or out of the CuInSe/sub 2/ crystals was not detected. More over, no composition or other chemical variation due to the deposition of the sulfide layer was observed.

  2. Development and analysis of Cu-doped ZnTe for use as a back contact interface for CdS/CdTe solar cells

    Science.gov (United States)

    Gessert, T. A.; Coutts, T. J.

    1994-06-01

    It is well known that the losses associated with the back contact of typical CdS/CdTe solar cell devices can be a substantial part of the total external loss. Previous modeling has indicated that these losses will be significant, unless the value of specific contact resistance (rc) at this interface is reduced to ˜0.10 Ω-cm2 or less. Although several studies have inferred values of rc near this level, few have attempted to measure directly the value of rc as a function of various processing conditions. One reason for this situation is the difficulty in fabricating the appropriate patterns for direct analysis of rc. In the following paper, initial characterization studies of sputter-deposited, Cu-doped ZnTe are documented. Additionally, recent attempts to measure directly the contact resistance associated with the two interfaces of the Ni/ZnTe/CdTe contact stack, are presented and discussed. Preliminary testing of these processes has been conducted using sputter-deposited test structures representing the individual interfaces of a typical Ni/ZnTe/CdTe contact stack. Contact resistance analysis of these structures has allowed for the estimation of rc suggesting that, for the conditions studied, the contact stack appears to meet the criterion of yielding an rc value <0.1 Ω-cm2.

  3. Behavior of Zn, Cu, Pb and Cd in biota of Yangtze Estuary

    Institute of Scientific and Technical Information of China (English)

    陆健健; 唐亚文; 唐亚文; 周开亚; 叶属峰; 孙平跃

    2001-01-01

    The contents of zinc, copper, lead and cadmium were measured in the dominant species (plants: Scripus triquetor and Phrgrmites australis, macrobenthos: llyoplax deschampsin, Helice tridens tientsinensis, Bullacta exarata and Corbicula fluminea, and migrating waders: Calidris ruficollis and C. alpina) of the ecosystem of Yangtze Estuary, China, from 1995-1998. Results show that:

  4. Investigating a potential mechanism of Cd resistance in Chironomus riparius larvae using kinetic analysis of calcium and cadmium uptake

    Energy Technology Data Exchange (ETDEWEB)

    Gillis, Patricia L. [Department of Biology, McMaster University, Hamilton, ON, L8S-4K1 (Canada)], E-mail: patty.gillis@ec.gc.ca; Wood, Chris M. [Department of Biology, McMaster University, Hamilton, ON, L8S-4K1 (Canada)

    2008-09-17

    The uptake kinetics of waterborne Ca and Cd, both independently and in combination, were examined in C. riparius larvae, which are extremely Cd tolerant. Larvae exposed to Ca (100-2500 {mu}mol L{sup -1}), exhibited classic Michaelis-Menten saturation kinetics for Ca influx, measured using {sup 45}Ca as a radio-tracer. The maximum rate of Ca influx (J{sub max}{sup Ca}) was 0.39 {mu}mol g{sup -1} h{sup -1}, and the Ca concentration where the carrier reached half saturation (K{sub M}{sup Ca}) was 289 {mu}mol L{sup -1}. Cd influx was measured using {sup 109}Cd as a radio-tracer in larvae exposed to Cd (0-1400 {mu}mol L{sup -1}) while the Ca concentration was set to the K{sub M}{sup Ca}. This revealed a J{sub max}{sup Cd} (2.26 {mu}mol g{sup -1} h{sup -1}) which was nearly 6-fold higher that of Ca. This unusually high capacity for Cd uptake is in accordance with the huge tissue Cd burdens that chironomid larvae are able to accumulate during high level exposures. The apparent K{sub M}{sup Cd} (1133 {mu}mol Cd L{sup -1}), when recalculated to account for the background Ca level, was still high (567 {mu}mol Cd L{sup -1}), suggesting that this organism has a low affinity for Cd relative to most aquatic animals, indeed lower or comparable to its affinity for Ca. In consequence, even well above environmentally relevant Cd exposures, C. riparius does not accumulate Cd at the expense of Ca, thereby avoiding internal hypocalcaemia, in contrast to most other organisms which are much more sensitive to Cd. However, Ca influx was significantly reduced when 1200 {mu}mol Cd L{sup -1} was added to Ca exposures (96-2410 {mu}mol L{sup -1}). Michaelis-Menten analysis revealed a similar J{sub max}{sup Ca} in Cd-exposed and control larvae (i.e. exposed only to Ca), but that the apparent K{sub M}{sup Ca} was many-fold higher in larvae which were simultaneously exposed to Ca and Cd. Conversely, increasing Ca concentrations (96-2410 {mu}mol L{sup -1}) progressively inhibited Cd uptake from a

  5. Effect of the cadmium chloride treatment on RF sputtered Cd{sub 0.6}Zn{sub 0.4}Te films for application in multijunction solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Shimpi, Tushar M., E-mail: mechanical.tushar@gmail.com; Kephart, Jason M.; Swanson, Drew E.; Munshi, Amit H.; Sampath, Walajabad S. [Department of Mechanical Engineering, Colorado State University, 1320 Campus Delivery, Fort Collins, Colorado 80523 (United States); Abbas, A.; Walls, John M. [CREST (Centre for Renewable Energy Systems and Technology), Loughborough University, Loughborough LE11 3TU (United Kingdom)

    2016-09-15

    Single phase Cd{sub 0.6}Zn{sub 0.4}Te (CdZnTe) films of 1 μm thickness were deposited by radio frequency planar magnetron sputter deposition on commercial soda lime glass samples coated with fluorine-doped tin oxide and cadmium sulphide (CdS). The stack was then treated with cadmium chloride (CdCl{sub 2}) at different temperatures using a constant treatment time. The effect of the CdCl{sub 2} treatment was studied using optical, materials, and electrical characterization of the samples and compared with the as-deposited CdZnTe film with the same stack configuration. The band gap deduced from Tauc plots on the as-deposited CdZnTe thin film was 1.72 eV. The deposited film had good crystalline quality with a preferred orientation along the {111} plane. After the CdCl{sub 2} treatment, the absorption edge shifted toward longer wavelength region and new peaks corresponding to cadmium telluride (CdTe) emerged in the x-ray diffraction pattern. This suggested loss of zinc after the CdCl{sub 2} treatment. The cross sectional transmission electron microscope images of the sample treated at 400 °C and the energy dispersive elemental maps revealed the absence of chlorine along the grain boundaries of CdZnTe and residual CdTe. The presence of chlorine in the CdTe devices plays a vital role in drastically improving the device performance which was not observed in CdZnTe samples treated with CdCl{sub 2}. The loss of zinc from the surface and incomplete recrystallization of the grains together with the presence of high densities of stacking faults were observed. The surface images using scanning electron microscopy showed that the morphology of the grains changed from small spherical shape to large grains formed due to the fusion of small grains with distinct grain boundaries visible at the higher CdCl{sub 2} treatment temperatures. The absence of chlorine along the grain boundaries, incomplete recrystallization and distinct grain boundaries is understood to cause the poor

  6. Experimental analysis of the simultaneous uptake of the heavy metals Cd, Hg, Pb, Cu, Zn, Se in the sporophore of mushrooms. Versuche ueber die simultane Aufnahme der Schwermetalle Cd, Hg, Pb, Cu, Zn und Se in Pilzfruchtkoerper

    Energy Technology Data Exchange (ETDEWEB)

    Suehs, K.

    With mushrooms of the species Agaricus bisporus and Boletus badius the simultaneous uptake of the heavy metals Cd, Hg, Pb, Cu, Zn, and Se from soil to the sporophore was studied. To avoid misleadingly overrated enrichmentfactors when comparing the heavy metal contents of dried mushrooms and soils, a so-called transfer factor TF[sub v] which is related to the volume is put to discussion here, this factor takes account of the relatively small amount of dry matter in mushrooms and of the different composition (that means specific weight) of the soils in question. With help of these transfer factors the conclusion is derived, that essential elements show a better enrichment behaviour than biologically superfluous heavy metals, at least this is true with the insignificantly contaminated soils we investigated. With Cd as an example of a ''superfluous'' element it is shown that there is a strict proportionality of Cd concentrations in the mushrooms and the corresponding soils, thus producing a constant transfer factor. Apart from this the uptake of copper into the mushrooms is promoted (growth of the transfer factor) by a larger Cd supply, whereas the other elements under investigation (even the classical antagonist Zn) are not significantly affected. Furthermore there is evidence that with increasing heavy metal concentration (Cd) first the fructification of the thallus is supported and moreover, that increasing age of this primary fungus corresponds with an increase of heavy metals in the mushrooms. (orig.)

  7. Combined effect of copper and cadmium on Chlorella vulgaris growth and photosynthesis-related gene transcription

    Energy Technology Data Exchange (ETDEWEB)

    Qian Haifeng; Li Jingjing; Sun Liwei; Chen Wei; Sheng, G. Daniel; Liu Weiping [College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310032 (China); Fu Zhengwei, E-mail: azwfu2003@yahoo.com.cn [College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310032 (China)

    2009-08-13

    Chlorella vulgaris was tested to assess their toxicities in freshwater contaminated by the metal compounds of copper (Cu) and cadmium (Cd), both singly and combined. Exposure to 0.5 and 1.5 {mu}M Cu or 1.0 and 2.0 {mu}M Cd alone significantly decreased algal growth and chlorophyll content and increased reactive oxygen species (ROS) content. Two-way ANOVA analysis shows that the combination of these two metal compounds decreased cell growth, chlorophyll content and increased ROS content synergistically. The highest algal cell inhibition was 78.55%, the lowest levels of chl a, chl b and total-chl were 10.59%, 33.33% and 17.94% of the control, respectively. The highest increase in ROS was 9.15-fold greater than that of the control when exposed to Cu(1.5) + Cd(2.0). Real-time PCR shows that Cu and Cd reduced the transcript abundance of psbA and rbcL, but without a synergistic interaction, whereas Cu and Cd increased the transcript abundance of psaB synergistically. These results demonstrate that Cu and Cd independently inhibit PSII activity and CO{sub 2} assimilation, but synergistically increase ROS content to disrupt chlorophyll synthesis and inhibit cell growth.

  8. Initial biochar properties related to the removal of As, Se, Pb, Cd, Cu, Ni, and Zn from an acidic suspension.

    Science.gov (United States)

    Clemente, Joyce S; Beauchemin, Suzanne; MacKinnon, Ted; Martin, Joseph; Johnston, Cliff T; Joern, Brad

    2017-03-01

    This study tests the influence of a diverse set of biochar properties on As(V), Se(IV), Cd(II), Cu(II), Ni(II), Pb(II), or Zn(II) removal from solution at pH 4.5. Six commercial biochars produced using different feedstock and pyrolysis conditions were extensively characterized using physical, chemical, and spectroscopic techniques, and their properties were correlated to anion and cation removal using multiple linear regression. H/total organic C (TOC) ratio and volatile matter were positively correlated to cation removal from solution, which indicate interactions between metals and non-aromatic C. Defining the correlation of ion removal with specific OC functional groups was hindered by the inherent limitations of the spectroscopic techniques, which was exacerbated by the heterogeneity of the biochars. Ash was negatively correlated to Se(IV) and positively correlated to Cd(II), Cu(II), and Ni(II) removal from solution. Interference from soluble P in biochars may partly explain the low Se(IV) removal from solution; and Ca-, P-, and Fe- containing compounds likely sorbed or precipitated Pb(II), Cd(II), Cu(II), Ni(II) and Zn(II). Furthermore, Ca-oxalate identified using X-ray diffraction in willow, may be responsible for willow's increased ability to remove Cd(II), Ni(II), and Zn(II) compared to the other 5 biochars. It was clear that both OC and inorganic biochar components influenced metal(loid) and Se(IV) removal from solution. The non-aromatic and volatile OC correlated to removal from solution may be readily available for microbial degradation, while Mg, N, P, and S are required for biological growth. Biological metabolism and uptake of these compounds may inhibit or destabilize their interaction with contaminants. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  9. Mosses as deposition estimators for heavy metals in precipitation. Deposition maps for Pb, Cd, Cu, and Zn in 1990 and 1995; Moser deposisjonsestimatorer for tungmetaller i nedboer. Deposisjonsrater for Pb, Cd, Cu og Zn i 1990 og 1995

    Energy Technology Data Exchange (ETDEWEB)

    Roeyset, O.

    1996-12-31

    Mosses can be used as biological indicators for deposition of heavy metals in precipitation as they take up most of the nutrients directly from precipitation. This report presents calculations of annual wet deposition rates for Pb, Cd, Cu, and Zn in Norway for 1990 and 1995 based on the relation between concentration of the metals in mosses and annual wet deposition. Based on data for heavy metals in mosses from nation-wide moss investigations in 1990 and 1995, including 500 points distributed all over Norway, kriging interpolation was performed to calculate annual deposition rates at a resolution of a 15 km x 15 km grid covering the entire country. Mosses were found to be good estimators for the wet deposition of the metals Pb and Cd, but not quite so good for Cu. For Zn, mosses could not be used directly and for this metal a deposition estimator was developed based on the concentration of Cd in the moss. 6 refs., 2 tabs.

  10. Fabrication of polymer/cadmium sulfide hybrid solar cells [P3HT:CdS and PCPDTBT:CdS] by spray deposition.

    Science.gov (United States)

    Kumar, Neetesh; Dutta, Viresh

    2014-11-15

    This paper investigates fabrication of surfactant free CdS nanoparticles (NPs) and application in the fabrication of P3HT:CdS and PCPDTBT:CdS bulk-heterojunction hybrid solar cells using high-throughput, large-area, low cost spray deposition technique. Both the hybrid active layers and hole transport layers are deposited by spray technique. The CdS/Poly(3-hexylthiophene-2,5-diyl) (P3HT) and CdS/Poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)-alt-4,7(2,1,3-benzothiadiazole)] (PCPDTBT) hybrid devices are fabricated by spray deposition process at optimized conditions (i.e. film thickness, spray solution volume, distance between sample and spray nozzle, substrate temperature, etc.). The power conversion efficiency of η=0.6% and 1.02% is obtained for P3HT:CdS and PCPDTBT:CdS hybrid devices, respectively. Spray coating holds significant promise as a technique capable of fabricating large-area, high performance hybrid solar cells. Copyright © 2014 Elsevier Inc. All rights reserved.

  11. Simultaneous removal of As, Cd, Cr, Cu, Ni and Zn from stormwater using high-efficiency industrial sorbents: Effect of pH, contact time and humic acid

    DEFF Research Database (Denmark)

    Genc-Fuhrman, Hülya; Mikkelsen, Peter Steen; Ledin, Anna

    2016-01-01

    The effect of contact time, solution pH, and the presence of humic acid (HA) on the combined removal of As, Cd, Cr, Cu, Ni and Zn is investigated in batch tests using alumina, granulated activated carbon (GAC), and bauxsol coated sand (BCS) as sorbents. It is found that the equilibrium time for Cd...

  12. Sonochemical synthesis and DFT studies of nano novel Schiff base cadmium complexes: Green, efficient, recyclable catalysts and precursors of Cd NPs

    Science.gov (United States)

    Parsaee, Zohreh

    2017-10-01

    Novel asymmetric (N4) Schiff bases (Ln, n = 1-3) and their nanosized cadmium complexes derived of 4,4'-(pentylazanediyl) dibenzaldehyde and aminobenzaldehyde are synthesized by sonochemical method and characterized based on physicochemical analysis including 1H NMR, 13C NMR, SEM, TGA, Mass, FT-IR, UV-Vis spectroscopy, elemental analysis, magnetic moment and molar conductance measurements. According to the analytic results of the NMR, UV-Vis and magnetic moment studies, it is found that the geometrical structures of these complexes [CdII2LnCl4], (L = C45H40N5X, X = CH3, Cl, OH) are square planer. The synthesized complexes were so effective as nanocatalyst on the oxidation of primary and secondary alcohols. The oxidation reactions were carried out in ethyl-methyl-imidazolium ionic liquid in presence of NaOCl. In addition Cd NPs were synthesized through the thermal decomposition of mentioned complexes and characterized by using FT-IR, SEM, TEM, EDX and XRD methods, which indicated close accordance to the standard pattern of CdO nanoparticles and an acceptable size at the nanorange (22-27 nm). Furthermore geometrical optimization of the Cd2LnCl4 calculated using DFT/B3LYP with LanL2DZ/6-311+G (d,p) level. The electronic parameter including HOMO-LUMO orbitals, bond gap, chemical hardness-softness, electronegativity, electrophilicity, NMR chemical shifts and IR frequencies were calculated. The calculated NMR shifts and vibrational frequencies showed excellent agreement with experimental data.

  13. New five coordinated supramolecular structured cadmium complex as precursor for CdO nanoparticles: Synthesis, crystal structure, theoretical and 3D Hirshfeld surface analyses

    Science.gov (United States)

    Ghanbari Niyaky, S.; Montazerozohori, M.; Masoudiasl, A.; White, J. M.

    2017-03-01

    In this paper, a combined experimental and theoretical study on a new CdLBr2 complex (L = N1-(2-bromobenzylidene)-N2-(2-((E)-(2-bromobenzylidene) amino)ethyl) ethane-1,2-diamine) synthesized via template method, is described. The crystal structure analysis of the complex indicates that, the Cd(II) ion is centered in a distorted square pyramidal space constructed by three iminic nitrogens of the ligand as well as two bromide anions. More analysis of crystal packing proposed a supramolecular structure stabilized by some non-covalent interactions such as Br⋯Br and Xsbnd H⋯Br (X = N and C) in solid state. Furthermore, 3D Hirshfeld surface analyses and DFT studies were applied for theoretical investigation of the complexes. Theoretical achievements were found in a good agreement with respect to the experimental data. To evaluate the nature of bonding and the strength of the intra and inter-molecular interactions a natural bond orbital (NBO) analysis on the complex structure was performed. Time dependent density functional theory (TD-DFT) was also applied to predict the electronic spectral data of the complex as compared with the experimental ones. CdLBr2 complex as nano-structure compound was also prepared under ultrasonic conditions and characterized by scanning electron microscopy (SEM) and X-ray powder diffraction (XRPD). Finally, it was found that the cadmium complex can be used as a suitable precursor for preparation of CdO nanoparticles via calcination process at 600 °C under air atmosphere.

  14. Biosorption of cadmium, lead and copper with calcium alginate xerogels and immobilized Fucus vesiculosus.

    Science.gov (United States)

    Mata, Y N; Blázquez, M L; Ballester, A; González, F; Muñoz, J A

    2009-04-30

    This paper determines the effect of immobilized brown alga Fucus vesiculosus in the biosorption of heavy metals with alginate xerogels. Immobilization increased the kinetic uptakes and intraparticle diffusion rates of the three metals. The Langmuir maximum biosorption capacity increased twofold for cadmium, 10 times for lead, and decreased by half for copper. According to this model, the affinity of the metals for the biomass was as follows: Cu>Pb>Cd without alga and Pb>Cu>Cd with alga. FITR confirmed that carboxyl groups were the main groups involved in the metal uptake. Calcium in the gels was displaced by heavy metals from solution according to the "egg-box" model. The restructured gel matrix became more uniform and organized as shown by scanning electron microscopy (SEM) characterization. F. vesiculosus immobilized in alginate xerogels constitutes an excellent biosorbent for cadmium, lead and copper, sometimes surpassing the biosorption performance of alginate alone and even the free alga.

  15. Biosorption of cadmium, lead and copper with calcium alginate xerogels and immobilized Fucus vesiculosus

    Energy Technology Data Exchange (ETDEWEB)

    Mata, Y.N. [Department of Materials Science and Metallurgical Engineering, Complutense University of Madrid, Ciudad Universitaria s/n, 28040 Madrid (Spain); Blazquez, M.L. [Department of Materials Science and Metallurgical Engineering, Complutense University of Madrid, Ciudad Universitaria s/n, 28040 Madrid (Spain)], E-mail: mlblazquez@quim.ucm.es; Ballester, A.; Gonzalez, F.; Munoz, J.A. [Department of Materials Science and Metallurgical Engineering, Complutense University of Madrid, Ciudad Universitaria s/n, 28040 Madrid (Spain)

    2009-04-30

    This paper determines the effect of immobilized brown alga Fucus vesiculosus in the biosorption of heavy metals with alginate xerogels. Immobilization increased the kinetic uptakes and intraparticle diffusion rates of the three metals. The Langmuir maximum biosorption capacity increased twofold for cadmium, 10 times for lead, and decreased by half for copper. According to this model, the affinity of the metals for the biomass was as follows: Cu > Pb > Cd without alga and Pb > Cu > Cd with alga. FITR confirmed that carboxyl groups were the main groups involved in the metal uptake. Calcium in the gels was displaced by heavy metals from solution according to the 'egg-box' model. The restructured gel matrix became more uniform and organized as shown by scanning electron microscopy (SEM) characterization. F. vesiculosus immobilized in alginate xerogels constitutes an excellent biosorbent for cadmium, lead and copper, sometimes surpassing the biosorption performance of alginate alone and even the free alga.

  16. Effects of cadmium on cation concentrations in sycamore cells (Acer pseudoplatanus L.): application of EDXRF.

    Science.gov (United States)

    Carvalho, M L; Silveira, L; Casimiro, A

    2002-04-01

    Knowledge of the element content of biological systems is important in enabling understanding of uptake mechanisms and physiological response to stress conditions. In this work concentrations of mineral elements in sycamore (Acer pseudoplatanus L.) cells grown in the presence of cadmium have been analysed and compared with concentrations in control cells. Energy-dispersive X-ray fluorescence (EDXRF) was used to quantify the nutrients K, Ca, Mn, Fe, Cu, and Zn present in the cells. The reproducibility and accuracy of the technique were demonstrated by analysis of biological reference materials. Exposure of sycamore cells to cadmium had induced variation in the content of some elements. Mn, Cu, Zn, and, particularly, Fe concentrations in cells exposed to Cd were higher than those found in control cells. Ca is adsorbed on the cell walls and the concentration of K is not affected by the presence of Cd.

  17. Electronic structure of Cu{sub 2}CdGeSe{sub 4} single crystal as determined from X-ray spectroscopy data

    Energy Technology Data Exchange (ETDEWEB)

    Ocheretova, V.A. [National Technical University “Kyiv Polytechnic Institute”, 37 Peremogy Avenue, Kyiv 03036 (Ukraine); Parasyuk, O.V. [Department of Inorganic and Physical Chemistry, Eastern European National University, 13 Voli Avenue, Lutsk 43025 (Ukraine); Fedorchuk, A.O. [Department of Inorganic and Organic Chemistry, Lviv National University of Veterinary Medicine and Biotechnologies, Pekarska St., 50, 79010 Lviv (Ukraine); Khyzhun, O.Y., E-mail: khyzhun@ipms.kiev.ua [Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, 3 Krzhyzhanivsky Street, Kyiv 03142 (Ukraine)

    2015-06-15

    We report on studies of the electronic structure of Cu{sub 2}CdGeSe{sub 4} single crystal by using X-ray photoelectron spectroscopy (XPS) and X-ray emission spectroscopy (XES). In particular, X-ray photoelectron core-level and valence-band spectra for pristine and Ar{sup +} ion-irradiated surfaces of the Cu{sub 2}CdGeSe{sub 4} single crystal have been recorded. Our XPS results indicate that Cu{sub 2}CdGeSe{sub 4} is rather rigid with respect to Ar{sup +} ion-irradiation: such a treatment does not induce any significant changes of values of the binding energies of core-level electrons as well as of the shapes of the XPS core-level and valence-band spectra of the Cu{sub 2}CdGeSe{sub 4} surface. For the Cu{sub 2}CdGeSe{sub 4} single crystal, the XES bands representing the energy distribution of mainly the valence Cu d, Cd d, Ge p and Se p states have been measured and compared on a common energy scale with its XPS valence-band spectrum. Such a comparison allows for concluding that the Cu 3d and Cd 4d states contribute mainly at the top and at the bottom of the valence band, respectively, while the Ge 4p and Se 4p states in the central and upper portions of the band. These experimental findings are found to be in agreement with literature data of band-structure calculations for this compound. - Highlights: • Electronic structure of Cu{sub 2}CdGeSe{sub 4} single crystal is studied by XPS and XES. • Low hygroscopicity is characteristic of Cu{sub 2}CdGeSe{sub 4} single crystal surface. • Cu 4d states contribute mainly at the bottom of the valence band. • Cu 3d states contribute predominantly at the top of the valence band. • Ge 4p and Se 4p states contribute in the central and upper portions of the band.

  18. Mercury cadmium telluride (HgCdTe) passivation by advanced thin conformal Al2O3 films

    Science.gov (United States)

    Fu, Richard; Pattison, James; Chen, Andrew; Nayfeh, Osama

    2012-06-01

    HgCdTe passivation process must be performed at low temperature in order to reduce Hg depletion. Low temperature plasma enhanced atomic layer deposition (PE-ALD) is an emerging deposition technology for thin highly conformal films to meet the demand. Room temperature PE-ALD Al2O3 film's passivation on HgCdTe has been studied. Conformal film was investigated through SEM images of the Al2O3 film deposited onto high aspect ratio features dry etched into HgCdTe. Minority carrier lifetime was measured and compared by photoconductive decay transients of HgCdTe before and after deposition. Room temperature ALD Al2O3 film increased the minority carrier lifetime of HgCdTe.

  19. Preparation of polycrystalline CdS thin films by chemical bath deposition

    Energy Technology Data Exchange (ETDEWEB)

    Lee, E.A.; Kim, B.S.; Shin, S.H.; Park, J.I.; Park, K.J. [National Industrial Technology Inst., Kwacheon (Korea, Republic of). Div. of Inorganic Chemistry

    1996-12-31

    CdS has been recognized as a promising n-type window material for CdTe/CdS and CuInSe{sub 2}/CdS heterojunction thin film solar cells. The authors prepared CdS thin films from a solution containing cadmium acetate, thiourea, ammonia, and ammonium acetate. They varied fabrication conditions such as the concentrations of reactants, reaction temperature, and heat treatment, to investigate the changes in structural and optical properties of the film. Effects of substrate on the properties were also investigated.

  20. Efeito de ZN, Cd e Cu no comportamento de fungos ectomicorrízicos em meio de cultura

    Directory of Open Access Journals (Sweden)

    P. H. Grazziotti

    2001-12-01

    Full Text Available Os fungos ectomicorrízicos são capazes de tolerar concentrações de metais pesados tóxicas às plantas hospedeiras, apesar de serem adversamente influenciados pelo excesso de alguns metais. Avaliou-se o crescimento de um isolado de Pisolithus tinctorius e outro de Suillus bovinus em meio de cultura líquido com doses crescentes de sais de Zn, Cu ou Cd adicionados individualmente em frascos de 125 mL que continham 50 mL de meio Mellin-Norkrans modificado (MNM, em pH 4,8. Os fungos cresceram por 20 dias em câmara de crescimento a 28ºC. O crescimento dos fungos foi inibido com a elevaçã