WorldWideScience

Sample records for csma forms multimers

  1. Selective Protein Extraction from Chlorobium tepidum Chlorosomes Using Detergents. Evidence That CsmA Forms Multimers and Binds Bacteriochlorophyll a

    DEFF Research Database (Denmark)

    Bryant, Donald A; Vassilieva, Elena V; Frigaard, Niels-Ulrik

    2002-01-01

    and location of this BChl a are not yet clearly understood. Chlorosomes were treated with sodium dodecyl sulfate (SDS), Lubrol PX, or Triton X-100, separately or in combination with 1-hexanol, and the extracted components were separated from the residual chlorosomes by ultrafiltration on centrifugal filters....... When chlorosomes were treated with low concentrations of SDS, all proteins except CsmA were extracted. However, this treatment did not significantly alter the size and shape of the chlorosomes, did not extract the BChl a, and caused only minor changes in the absorption spectrum of the chlorosomes....... Cross-linking studies with SDS-treated chlorosomes revealed the presence of multimers of the major chlorosome protein, CsmA, up to homooctamers. Extraction of chlorosomes with SDS and 1-hexanol solubilized all ten chlorosome envelope proteins as well as BChl a. Although the size and shape...

  2. Selective protein extraction from Chlorobium tepidum chlorosomes using detergents. Evidence that CsmA forms multimers and binds bacteriochlorophyll a.

    Science.gov (United States)

    Bryant, Donald A; Vassilieva, Elena V; Frigaard, Niels-Ulrik; Li, Hui

    2002-12-03

    Chlorosomes of the photosynthetic green sulfur bacterium Chlorobium tepidum consist of bacteriochlorophyll (BChl) c aggregates that are surrounded by a lipid-protein monolayer envelope that contains ten different proteins. Chlorosomes also contain a small amount of BChl a, but the organization and location of this BChl a are not yet clearly understood. Chlorosomes were treated with sodium dodecyl sulfate (SDS), Lubrol PX, or Triton X-100, separately or in combination with 1-hexanol, and the extracted components were separated from the residual chlorosomes by ultrafiltration on centrifugal filters. When chlorosomes were treated with low concentrations of SDS, all proteins except CsmA were extracted. However, this treatment did not significantly alter the size and shape of the chlorosomes, did not extract the BChl a, and caused only minor changes in the absorption spectrum of the chlorosomes. Cross-linking studies with SDS-treated chlorosomes revealed the presence of multimers of the major chlorosome protein, CsmA, up to homooctamers. Extraction of chlorosomes with SDS and 1-hexanol solubilized all ten chlorosome envelope proteins as well as BChl a. Although the size and shape of these extracted chlorosomes did not initially differ significantly from untreated chlorosomes, the extracted chlorosomes gradually disintegrated, and rod-shaped BChl c aggregates were sometimes observed. These results strongly suggest that CsmA binds the BChl a in Chlorobium-type chlorosomes and further indicate that none of the nine other chlorosome envelope proteins are absolutely required for maintaining the shape and integrity of chlorosomes. Quantitative estimates suggest that chlorosomes contain approximately equimolar amounts of CsmA and BChl a and that roughly one-third of the surface of the chlorosome is covered by CsmA.

  3. Asymptotic performance characteristics of CSMA and CSMA ← CD → CSMA / CD networks

    Directory of Open Access Journals (Sweden)

    Lim J.-T

    1996-01-01

    Full Text Available This paper presents analytical formulae for performance evaluation of CSMA and CSMA/CD networks with a finite number of buffered users. The asymptotic theory developed in [1] is extended to local area networks so as to investigate the resulting steady state throughput, time delay, probability of blocking, and local stability of each equilibrium. In particular, the stabilization of CSMA and CSMA/CD networks is considered, i.e., how to choose the transmission probability so that a unique steady state with relatively high performance characteristics is achieved.

  4. Cryopreservation of MHC multimers

    DEFF Research Database (Denmark)

    Hadrup, Sine Reker; Maurer, Dominik; Laske, Karoline;

    2015-01-01

    and long-term storage is generally not recommended. We investigated here the possibility of cryopreserving MHC multimers, both in-house produced and commercially available, using a wide range of peptide-MHC class I multimers comprising virus and cancer-associated epitopes of different affinities presented...

  5. Asymptotic performance characteristics of CSMA and CSMA←CD→CSMA/CD networks

    Directory of Open Access Journals (Sweden)

    J.-T Lim

    1996-01-01

    Full Text Available This paper presents analytical formulae for performance evaluation of CSMA and CSMA/CD networks with a finite number of buffered users. The asymptotic theory developed in [1] is extended to local area networks so as to investigate the resulting steady state throughput, time delay, probability of blocking, and local stability of each equilibrium. In particular, the stabilization of CSMA and CSMA/CD networks is considered, i.e., how to choose the transmission probability so that a unique steady state with relatively high performance characteristics is achieved.

  6. Adiponectin multimer distribution in patients with familial combined hyperlipidemia.

    NARCIS (Netherlands)

    Koenen, T.B.; Tits, L.J.H. van; Holewijn, S.; Lemmers, H.L.M.; Heijer, M. den; Stalenhoef, A.F.H.; Graaf, J. de

    2008-01-01

    Adiponectin is secreted from adipocytes in different multimers, of which the high molecular weight (HMW) form is supposed to mediate favorable metabolic and anti-atherogenic effects. We determined adiponectin multimers in 29 female and 22 male patients with familial combined hyperlipidemia (FCH) and

  7. The mitochondrial calcium uniporter is a multimer that can include a dominant-negative pore-forming subunit.

    Science.gov (United States)

    Raffaello, Anna; De Stefani, Diego; Sabbadin, Davide; Teardo, Enrico; Merli, Giulia; Picard, Anne; Checchetto, Vanessa; Moro, Stefano; Szabò, Ildikò; Rizzuto, Rosario

    2013-08-28

    Mitochondrial calcium uniporter (MCU) channel is responsible for Ruthenium Red-sensitive mitochondrial calcium uptake. Here, we demonstrate MCU oligomerization by immunoprecipitation and Förster resonance energy transfer (FRET) and characterize a novel protein (MCUb) with two predicted transmembrane domains, 50% sequence similarity and a different expression profile from MCU. Based on computational modelling, MCUb includes critical amino-acid substitutions in the pore region and indeed MCUb does not form a calcium-permeable channel in planar lipid bilayers. In HeLa cells, MCUb is inserted into the oligomer and exerts a dominant-negative effect, reducing the [Ca(2+)]mt increases evoked by agonist stimulation. Accordingly, in vitro co-expression of MCUb with MCU drastically reduces the probability of observing channel activity in planar lipid bilayer experiments. These data unveil the structural complexity of MCU and demonstrate a novel regulatory mechanism, based on the inclusion of dominant-negative subunits in a multimeric channel, that underlies the fine control of the physiologically and pathologically relevant process of mitochondrial calcium homeostasis.

  8. CSMA/CCA: A Modified CSMA/CA Protocol Mitigating the Fairness Problem for IEEE 802.11 DCF

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available Carrier sense multiple access with collision avoidance (CSMA/CA has been adopted by the IEEE 802.11 standards for wireless local area networks (WLANs. Using a distributed coordination function (DCF, the CSMA/CA protocol reduces collisions and improves the overall throughput. To mitigate fairness issues arising with CSMA/CA, we develop a modified version that we term CSMA with copying collision avoidance (CSMA/CCA. A station in CSMA/CCA contends for the shared wireless medium by employing a binary exponential backoff similar to CSMA/CA. Different from CSMA/CA, CSMA/CCA copies the contention window (CW size piggybacked in the MAC header of an overheard data frame within its basic service set (BSS and updates its backoff counter according to the new CW size. Simulations carried out in several WLAN configurations illustrate that CSMA/CCA improves fairness relative to CSMA/CA and offers considerable advantages for deployment in the 802.11-standard-based WLANs.

  9. Coping with Asymmetric Channel Losses in CSMA/CA

    DEFF Research Database (Denmark)

    Paramanathan, Achuthan; Roetter, Daniel Enrique Lucani; Fitzek, Frank

    2013-01-01

    Inspired by the discrepancy between past theoretical analysis and real measurements for high-load scenarios for intersession network coding, we pinpoint and analyze the source of this discrepancy in wireless networks implementing a CSMA/CA medium access scheme. Our analysis shows that CSMA/CA is ......) confirm the sensitivity of the CSMA/CA scheme in real implementations, and (ii) shows that our adaptive protocol provides a simple, yet potent mechanism to cope with asymmetric channel losses and ultimately to enhance end-to-end throughput in high-load scenarios....

  10. Efficient Queue-based CSMA with Collisions

    CERN Document Server

    Shah, Devavrat

    2010-01-01

    Recently there has been considerable interest in the design of efficient carrier sense multiple access(CSMA) protocol for wireless network. The basic assumption underlying recent results is availability of perfect carrier sense information. This allows for design of continuous time algorithm under which collisions are avoided. The primary purpose of this note is to show how these results can be extended in the case when carrier sense information may not be perfect, or equivalently delayed. Specifically, an adaptation of algorithm in Rajagopalan, Shah, Shin (2009) is presented here for time slotted setup with carrier sense information available only at the end of the time slot. To establish its throughput optimality, in additon to method developed in Rajagopalan, Shah, Shin (2009), understanding properties of stationary distribution of a certain non-reversible Markov chain as well as bound on its mixing time is essential. This note presents these key results. A longer version of this note will provide detailed...

  11. Using CSMA/CD for Ethernet Passive Optical Network (EPON)

    Institute of Scientific and Technical Information of China (English)

    季晓飞; 范戈

    2004-01-01

    Using CSMA/CD for EPON can eliminate the augmentations, such as multi-point control protocol and point-to-point emulation, added to the existing 802.3 architecture due to the incompatibility of PON to Ethernet.Both full-duplex EPON system and half-duplex EPON system using CSMA/CD were proposed. In the full-duplex EPON, CSMA/CD is used as the upstream MAC protocol. In the half-duplex EPON system, both upstream and downstream traffic contend for the optical channel through CSMA/CD protocol. The upstream lightwave redirection and collision detection techniques were given. By the analysis and simulation, the throughput performance of the half-duplex EPON system is proven to be as well as that of the existing high speed half-duplex Ethernet LAN.

  12. Escultura Multimédia

    OpenAIRE

    2009-01-01

    Mestrado em Arte Multimédia A presente investigação realizou-se a partir da consciência da importância das novas ferramentas de modelação digitais, associadas a um alargamento da construção e percepção da experiência da tridimensionalidade, como atesta a quantidade de exemplos que remetem para novas possibilidades de tradução da matéria para a escultura. Intentou-se abordar as tendências estéticas e as potencialidades interactivas, implementadas no território da escultura...

  13. Arachidonic acid mediates the formation of abundant alpha-helical multimers of alpha-synuclein

    Science.gov (United States)

    Iljina, Marija; Tosatto, Laura; Choi, Minee L.; Sang, Jason C.; Ye, Yu; Hughes, Craig D.; Bryant, Clare E.; Gandhi, Sonia; Klenerman, David

    2016-09-01

    The protein alpha-synuclein (αS) self-assembles into toxic beta-sheet aggregates in Parkinson’s disease, while it is proposed that αS forms soluble alpha-helical multimers in healthy neurons. Here, we have made αS multimers in vitro using arachidonic acid (ARA), one of the most abundant fatty acids in the brain, and characterized them by a combination of bulk experiments and single-molecule Fӧrster resonance energy transfer (sm-FRET) measurements. The data suggest that ARA-induced oligomers are alpha-helical, resistant to fibril formation, more prone to disaggregation, enzymatic digestion and degradation by the 26S proteasome, and lead to lower neuronal damage and reduced activation of microglia compared to the oligomers formed in the absence of ARA. These multimers can be formed at physiologically-relevant concentrations, and pathological mutants of αS form less multimers than wild-type αS. Our work provides strong biophysical evidence for the formation of alpha-helical multimers of αS in the presence of a biologically relevant fatty acid, which may have a protective role with respect to the generation of beta-sheet toxic structures during αS fibrillation.

  14. Comparison of CSMA based MAC protocols of wireless sensor networks

    CERN Document Server

    singh, Himanshu

    2012-01-01

    Energy conservation has been an important area of interest in Wireless Sensor networks (WSNs). Medium Access Control (MAC) protocols play an important role in energy conservation. In this paper, we describe CSMA based MAC protocols for WSN and analyze the simulation results of these protocols. We implemented S-MAC, T-MAC, B-MAC, B-MAC+, X-MAC, DMAC and Wise-MAC in TOSSIM, a simulator which unlike other simulators simulates the same code running on real hardware. Previous surveys mainly focused on the classification of MAC protocols according to the techniques being used or problem dealt with and presented a theoretical evaluation of protocols. This paper presents the comparative study of CSMA based protocols for WSNs, showing which MAC protocol is suitable in a particular environment and supports the arguments with the simulation results. The comparative study can be used to find the best suited MAC protocol for wireless sensor networks in different environments.

  15. Synthesizing Existing CSMA and TDMA Based MAC Protocols for VANETs.

    Science.gov (United States)

    Huang, Jiawei; Li, Qi; Zhong, Shaohua; Liu, Lianhai; Zhong, Ping; Wang, Jianxin; Ye, Jin

    2017-02-10

    Many Carrier Sense Multiple Access (CSMA) and Time Division Multiple Access (TDMA) based medium access control (MAC) protocols for vehicular ad hoc networks (VANETs) have been proposed recently. Contrary to the common perception that they are competitors, we argue that the underlying strategies used in these MAC protocols are complementary. Based on this insight, we design CTMAC, a MAC protocol that synthesizes existing strategies; namely, random accessing channel (used in CSMA-style protocols) and arbitral reserving channel (used in TDMA-based protocols). CTMAC swiftly changes its strategy according to the vehicle density, and its performance is better than the state-of-the-art protocols. We evaluate CTMAC using at-scale simulations. Our results show that CTMAC reduces the channel completion time and increases the network goodput by 45% for a wide range of application workloads and network settings.

  16. Du laboratoire audio au laboratoire multimédia

    Directory of Open Access Journals (Sweden)

    Béatrice Vautherin

    2000-01-01

    Full Text Available Les évolutions technologiques récentes amènent les enseignants de langues à faire des choix pour intégrer les outils multimédias dans leur pratique. Les investissements qu'implique cette modernisation, tant en termes de budgets qu'en termes de formation des utilisateurs, nécessitent que ces choix soient éclairés. La complexité du domaine appelle la fédération des compétences et la circulation de l'information pour surmonter les obstacles les plus fréquents. On trouvera ci-dessous une contribution à ce débat sous la forme d'un état des lieux dans une université spécialisée dans les langues et de l'examen détaillé d'un aspect particulier assez épineux, mais incontournable, la création de cours multimédias à partir de matériau pédagogique existant.

  17. Effective Carrier Sensing in CSMA Networks under Cumulative Interference

    CERN Document Server

    Fu, Liqun; Huang, Jianwei

    2009-01-01

    This paper proposes and investigates the concept of a safe carrier-sensing range that can guarantee interference safe (also termed hidden-node-free) transmissions in CSMA networks under the cumulative interference model. Compared with the safe carrier-sensing range under the commonly assumed but less realistic pairwise interference model, we show that the safe carrier-sensing range required under the cumulative interference model is larger by a constant multiplicative factor. The concept of a safe carrier-sensing range, although amenable to elegant analytical results, is inherently not compatible with the conventional power threshold carrier-sensing mechanism (e.g., that used in IEEE 802.11). Specifically, the absolute power sensed by a node in the conventional mechanism does not contain enough information for it to derive its distances from other concurrent transmitter nodes. We show that, fortunately, a carrier-sensing mechanism called Incremental-Power Carrier-Sensing (IPCS) can realize the carrier-sensing...

  18. A Fast-CSMA Algorithm for Deadline-Constrained Scheduling over Wireless Fading Channels

    CERN Document Server

    Li, Bin

    2012-01-01

    Recently, low-complexity and distributed Carrier Sense Multiple Access (CSMA)-based scheduling algorithms have attracted extensive interest due to their throughput-optimal characteristics in general network topologies. However, these algorithms are not well-suited for serving real-time traffic under time-varying channel conditions for two reasons: (1) the mixing time of the underlying CSMA Markov Chain grows with the size of the network, which, for large networks, generates unacceptable delay for deadline-constrained traffic; (2) since the dynamic CSMA parameters are influenced by the arrival and channel state processes, the underlying CSMA Markov Chain may not converge to a steady-state under strict deadline constraints and fading channel conditions. In this paper, we attack the problem of distributed scheduling for serving real-time traffic over time-varying channels. Specifically, we consider fully-connected topologies with independently fading channels (which can model cellular networks) in which flows wi...

  19. Time-Based CSMA Protocol for Alleviating Collision Problem in RFID System

    Directory of Open Access Journals (Sweden)

    Poornima.R

    2013-04-01

    Full Text Available Radio Frequency Identification (RFID System admits rapid identification of entities by itself in the discipline of pervasive computing. RFID system comprises readers and tags. Readers arecommunicating with the tag by broadcasting RF signals. In existing RFID system channel assignment, tag identification and collision is a vital issue. Henceforth efforts are requisite to minimize these issues. This work evaluating the throughput of the RFID system by incorporating time into Carrier Sense Multiple Access (CSMA protocol. Time based CSMA (TCSMA depends on CSMA below low contention and TDMA below high contention in RFID system. The performance can be measured by Mat lab simulator. Time Based CSMA improves the tag read rate and also reduces the collision problem when compared to the conventional algorithm.

  20. Towards a Collision-Free WLAN: Dynamic Parameter Adjustment in CSMA/E2CA

    Directory of Open Access Journals (Sweden)

    Bellalta Boris

    2011-01-01

    Full Text Available Carrier sense multiple access with enhanced collision avoidance (CSMA/ECA is a distributed MAC protocol that allows collision-free access to the medium in WLANs. The only difference between CSMA/ECA and the well-known CSMA/CA is that the former uses a deterministic backoff after successful transmissions. Collision-free operation is reached after a transient state during which some collisions may occur. This paper shows that the duration of the transient state can be shortened by appropriately setting the contention parameters. Standard absorbing Markov chain theory is used to describe the behaviour of the system in the transient state and to predict the expected number of slots to reach the collision-free operation. The paper also introduces CSMA/E2CA, in which a deterministic backoff is used two consecutive times after a successful transmission. CSMA/E2CA converges quicker to collision-free operation and delivers higher performance than CSMA/ECA, specially in harsh wireless scenarios with high frame-error rates. The last part of the paper addresses scenarios with a large number of contenders. We suggest dynamic parameter adjustment techniques to accommodate a varying (and potentially high number of contenders. The effectiveness of these adjustments in preventing collisions is validated by means of simulation.

  1. Ammoniated electron as a solvent stabilized multimer radical anion

    CERN Document Server

    Shkrob, I A

    2005-01-01

    The excess electron in liquid ammonia ("ammoniated electron") is commonly viewed as a cavity electron in which the s-type wave function fills the interstitial void between 6-9 ammonia molecules. Herewith an alternative model is examined in which the ammoniated electron is regarded as a solvent stabilized multimer radical anion, as was originally suggested by Symons [Chem. Soc. Rev. 1976, 5, 337]. In this model, most of the excess electron density resides in the frontier orbitals of N atoms in the ammonia molecules forming the solvation cavity; a fraction of this spin density is transferred to the molecules in the second solvation shell. The cavity is formed due to the repulsion between negatively charged solvent molecules. Using density functional theory calculations for small ammonia cluster anions in the gas phase, it is demonstrated that such core anions would quantitatively account for the observed pattern of Knight shifts for 1H and 14N nuclei as observed by NMR spectroscopy and the downshifted stretchin...

  2. Aspergillus nidulans class V and VI chitin synthases CsmA and CsmB, each with a myosin motor-like domain, perform compensatory functions that are essential for hyphal tip growth.

    Science.gov (United States)

    Takeshita, Norio; Yamashita, Shuichi; Ohta, Akinori; Horiuchi, Hiroyuki

    2006-03-01

    The polarized synthesis of cell wall components such as chitin is essential for the hyphal tip growth of filamentous fungi. The actin cytoskeleton is known to play important roles in the determination of hyphal polarity in Aspergillus nidulans. Previously, we suggested that CsmA, a chitin synthase with a myosin motor-like domain (MMD), was involved in polarized chitin synthesis in a manner dependent on the interaction between the MMD and the actin cytoskeleton. The genome database indicates that A. nidulans possesses another gene encoding another chitin synthase with an MMD. In this study, we characterized this gene, which we designated csmB. The csmB null mutants examined were viable, although they exhibited defective phenotypes, including the formation of balloons and intrahyphal hyphae and the lysis of subapical regions, which were similar to those obtained with csmA null mutants. Moreover, csmA csmB double null mutants were not viable. Mutants in which csmB was deleted and the expression of csmA was under the control of the alcA promoter were viable but severely impaired in terms of hyphal growth under alcA-repressing conditions. We revealed that CsmB with three copies of a FLAG epitope tag localized at the hyphal tips and forming septa, and that the MMD of CsmB was able to bind to actin filaments in vitro. These results suggest that CsmA and CsmB perform compensatory functions that are essential for hyphal tip growth.

  3. Upstream Channel Utilization of CSMA/CD-Based Ethernet over Passive Optical Networks

    Institute of Scientific and Technical Information of China (English)

    Elaine; Wong; Chang-Joon; Chae

    2003-01-01

    We demonstrate that an asynchronous CSMA/CD protocol with an optical loop-back star coupler can achieve high upstream channel utilizatbn in an Ethernet PON, readily supporting a large installed base of Ethernet 10BaseT and 100BaseT interfaces.

  4. Upstream Channel Utilization of CSMA/CD-Based Ethernet over Passive Optical Networks

    Institute of Scientific and Technical Information of China (English)

    Elaine Wong; Chang-Joon Chae

    2003-01-01

    We demonstrate that an asynchronous CSMA/CD protocol with an optical loop-back star coupler can achieve high upstream channel utilization in an Ethernet PON, readily supporting a large installed base of Ethernet 10BaseT and 100BaseT interfaces.

  5. Functional significance of a hepta nucleotide motif present at the junction of Cucumber mosaic virus satellite RNA multimers in helper-virus dependent replication.

    Science.gov (United States)

    Seo, Jang-Kyun; Kwon, Sun-Jung; Chaturvedi, Sonali; Choi, Soon Ho; Rao, A L N

    2013-01-20

    Satellite RNAs (satRNA) associated with Cucumber mosaic virus (CMV) have been shown to generate multimers during replication. We have discovered that multimers of a CMV satRNA generated in the absence of its helper virus (HV) are characterized by the addition of a hepta nucleotide motif (HNM) at the monomer junctions. Here, we evaluated the functional significance of HNM in HV-dependent replication by ectopically expressing wild type and mutant forms of satRNA multimers in planta either in (+) or (-)-strand polarity. Comparative replication profiles revealed that (-)-strand multimers with complementary HNM (cHNM) are the preferred initial templates for HV-dependent replication than (-)-strand monomers and multimers lacking the cHNM. Further mutational analyses of the HNM accentuate that preservation of the sequence and native length of HNM is obligatory for efficient replication of satRNA. A model implicating the significance of HNM in HV-dependent production of monomeric and multimeric forms of satRNA is presented.

  6. ADNP-CSMA Random Multiple Access protocol application with the function of monitoring in Ad Hoc network

    Directory of Open Access Journals (Sweden)

    Zhan Gang

    2016-01-01

    Full Text Available In Ad Hoc networks,the net work of mobile nodes exchange information with their wireless transceiver equipment,the network throughput is in increased,compared to other such multiple hops network.Moreover along with the rapid development of modern information,communication business also will be increase.However,the access and adaptive of previous CSMA protocol are insufficient.According to these properties,this paper presents a kind of adaptive dual clock with monitoring function P-CSMA random multiple access protocol(ADNP-CSMA,and discusses two kinds of P-CSMA.ACK with monitoring function is introduced to maintain the stability of the whole system,and the introduction of dual clock mechanism reduces the channel of idle period.It calculate the system throughput expression through the method of average period,and the simulation results show that the system is constant in the case of high load throughput.

  7. An Improved Markov Model for IEEE 802.15.4 Slotted CSMA/CA Mechanism

    Institute of Scientific and Technical Information of China (English)

    Hao Wen; Chuang Lin; Zhi-Jia Chen; Hao Yin; Tao He; Eryk Dutkiewicz

    2009-01-01

    IEEE 802.15.4 protocol is proposed to meet the low latency and energy consumption needs in low-rate wireless applications, however, few analytical models are tractable enough for comprehensive evaluation of the protocol. To evaluate the IEEE 802.15.4 slotted CSMA/CA channel access mechanism in this paper, we propose a practical and accurate discrete Markov chain model, which can dynamically represent different network loads. By computing the steady-state distribution probability of the Markov chain, we obtain an evaluation formula for throughput, energy consumption, and access latency. Then we further analyze the parameters that influence performance including packet arrival rate, initial backoff exponent and maximum backoff number. Finally, NS2 simulator has been used to evaluate the performance of the 802.15.4 CSMA/CA mechanism under different scenarios and to validate the accuracy of the proposed model.

  8. Modeling and Performance Evaluation of Backoff Misbehaving Nodes in CSMA/CA Networks

    Science.gov (United States)

    2012-08-01

    range of backoff misbehaviors on network performance in CSMA/CA-based wireless networks. 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17...consider the same transmission process under a different MAC protocol, such as ZigBee or even different 802.11 models, the packet delay will change because...Layer Misbeha- vior in Wireless Networks,” ACM Trans. Information and Systems Security , vol. 11, no. 4, pp. 19:1-19:28, July 2008. [10] S. Choi, K

  9. A Specification of a CSMA/CD Protocol Using Systems of Communicating Machines

    Science.gov (United States)

    1989-06-01

    Figure 3. LAN Standart Relationship to the OS Reference Model ..... 22 Figure 4. Specification of the Transmitter ....................... 29 Figure 5...general review of the IEEE Standart 802.3-1985 Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer...ATTACHMENT UNIT INTERFACE MAU = MEDIUM ATTACHMENT UNIT MDI = MEDIUM DEPENDENT INTERFACE PMA = PHYSICAL MEDIUM ATTACHMENT Figure 3. LAN Standart

  10. Ensino online e aprendizagem multimédia

    OpenAIRE

    Miranda, Guilhermina Lobato

    2009-01-01

    Este livro está dividido em duas partes: Ensino online e Aprendizaem multimédia, contando com a colaboração de vários autores nacionais e internacionais, que redigiram os 12 capítulos que o compõem. Por exemplo, o capítulo sobre a "Teoria cognitiva da aprendizagem multimédia" foi redigido por Richard Mayer, psicólogio norte-americano que concebeu e desenvolveu esta teoria. Este livro centra-se na concepção de cursos ministrados em regime de eLearning e a distância, interessando também às pess...

  11. Rearrangement of MICU1 multimers for activation of MCU is solely controlled by cytosolic Ca(2.).

    Science.gov (United States)

    Waldeck-Weiermair, Markus; Malli, Roland; Parichatikanond, Warisara; Gottschalk, Benjamin; Madreiter-Sokolowski, Corina T; Klec, Christiane; Rost, Rene; Graier, Wolfgang F

    2015-10-22

    Mitochondrial Ca(2+) uptake is a vital process that controls distinct cell and organelle functions. Mitochondrial calcium uptake 1 (MICU1) was identified as key regulator of the mitochondrial Ca(2+) uniporter (MCU) that together with the essential MCU regulator (EMRE) forms the mitochondrial Ca(2+) channel. However, mechanisms by which MICU1 controls MCU/EMRE activity to tune mitochondrial Ca(2+) signals remain ambiguous. Here we established a live-cell FRET approach and demonstrate that elevations of cytosolic Ca(2+) rearranges MICU1 multimers with an EC50 of 4.4 μM, resulting in activation of mitochondrial Ca(2+) uptake. MICU1 rearrangement essentially requires the EF-hand motifs and strictly correlates with the shape of cytosolic Ca(2+) rises. We further show that rearrangements of MICU1 multimers were independent of matrix Ca(2+) concentration, mitochondrial membrane potential, and expression levels of MCU and EMRE. Our experiments provide novel details about how MCU/EMRE is regulated by MICU1 and an original approach to investigate MCU/EMRE activation in intact cells.

  12. Service differentiated and adaptive CSMA/CA over IEEE 802.15.4 for Cyber-Physical Systems.

    Science.gov (United States)

    Xia, Feng; Li, Jie; Hao, Ruonan; Kong, Xiangjie; Gao, Ruixia

    2013-01-01

    Cyber-Physical Systems (CPS) that collect, exchange, manage information, and coordinate actions are an integral part of the Smart Grid. In addition, Quality of Service (QoS) provisioning in CPS, especially in the wireless sensor/actuator networks, plays an essential role in Smart Grid applications. IEEE 802.15.4, which is one of the most widely used communication protocols in this area, still needs to be improved to meet multiple QoS requirements. This is because IEEE 802.15.4 slotted Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) employs static parameter configuration without supporting differentiated services and network self-adaptivity. To address this issue, this paper proposes a priority-based Service Differentiated and Adaptive CSMA/CA (SDA-CSMA/CA) algorithm to provide differentiated QoS for various Smart Grid applications as well as dynamically initialize backoff exponent according to traffic conditions. Simulation results demonstrate that the proposed SDA-CSMA/CA scheme significantly outperforms the IEEE 802.15.4 slotted CSMA/CA in terms of effective data rate, packet loss rate, and average delay.

  13. Service Differentiated and Adaptive CSMA/CA over IEEE 802.15.4 for Cyber-Physical Systems

    Directory of Open Access Journals (Sweden)

    Feng Xia

    2013-01-01

    Full Text Available Cyber-Physical Systems (CPS that collect, exchange, manage information, and coordinate actions are an integral part of the Smart Grid. In addition, Quality of Service (QoS provisioning in CPS, especially in the wireless sensor/actuator networks, plays an essential role in Smart Grid applications. IEEE 802.15.4, which is one of the most widely used communication protocols in this area, still needs to be improved to meet multiple QoS requirements. This is because IEEE 802.15.4 slotted Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA employs static parameter configuration without supporting differentiated services and network self-adaptivity. To address this issue, this paper proposes a priority-based Service Differentiated and Adaptive CSMA/CA (SDA-CSMA/CA algorithm to provide differentiated QoS for various Smart Grid applications as well as dynamically initialize backoff exponent according to traffic conditions. Simulation results demonstrate that the proposed SDA-CSMA/CA scheme significantly outperforms the IEEE 802.15.4 slotted CSMA/CA in terms of effective data rate, packet loss rate, and average delay.

  14. El context multimèdia, setembre 2010

    OpenAIRE

    2010-01-01

    Ja no es pot pensar un mitjà de comunicació en clau tradicional. Les noves tecnologies fan possible productes multimèdia i multiplataforma que van guanyant terreny dins del mercat informatiu. En primer lloc, perquè responen millor a les necessitats i gustos dels consumidors actuals i, en segon lloc, perquè economitzen recursos i esforços. En aquesta assignatura veurem nous models de producció periodística, quina tendència segueixen les redaccions i quin és el perfil dels professionals que hi ...

  15. Parallel detection of antigen-specific T-cell responses by multidimensional encoding of MHC multimers

    DEFF Research Database (Denmark)

    Hadrup, Sine Reker; Bakker, Arnold H; Shu, Chengyi J

    2009-01-01

    The use of fluorescently labeled major histocompatibility complex multimers has become an essential technique for analyzing disease- and therapy-induced T-cell immunity. Whereas classical major histocompatibility complex multimer analyses are well-suited for the detection of immune responses to a...

  16. Back-of-the-Envelope Computation of Throughput Distributions in CSMA Wireless Networks

    CERN Document Server

    Liew, S C; Leung, J; Wong, B

    2007-01-01

    This work started out with our accidental discovery of a pattern of throughput distributions among links in IEEE 802.11 networks from experimental results. This pattern gives rise to an easy computation method, which we term back-of-the-envelop (BoE) computation, because for many network configurations, very accurate results can be obtained within minutes, if not seconds, by simple hand computation. BoE beats prior methods in terms of both speed and accuracy. While the computation procedure of BoE is simple, explaining why it works is by no means trivial. Indeed the majority of our investigative efforts have been devoted to the construction of a theory to explain BoE. This paper models an ideal CSMA network as a set of interacting on-off telegraph processes. In developing the theory, we discovered a number of analytical techniques and observations that have eluded prior research, such as that the carrier-sensing interactions among links in an ideal CSMA network result in a system state evolution that is time-...

  17. Performance of binary exponential backoff CSMA in WiFi and optimal routing in mobile ad hoc networks

    OpenAIRE

    Jacquet, Philippe; Naimi, Amina Meraihi; Rodolakis, Georgios

    2005-01-01

    International audience; In this paper we show that the CSMA IEEE 802.11 protocol (Wifi) provides packet access delays asymptotics in power law. This very feature allows us to specify optimal routing via polynomial algorithm while the general case is NP-hard.

  18. The three-dimensional structure of CsmA: A small antenna protein from the green sulfur bacterium Chlorobium tepidum

    DEFF Research Database (Denmark)

    Pedersen, Marie Østergaard; Underhaug, Jarl; Dittmer, Jens

    2008-01-01

    The structure of the chlorosome baseplate protein CsmA from Chlorobium tepidum in a 1:1 chloroform:methanol solution was determined using liquid-state NMR spectroscopy. The data reveal that the 59-residue protein is predominantly α-helical with a long helical domain extending from residues V6 to ...... and the short C-terminal helix protruding outwards, thus available for interaction with the Fenna-Matthews-Olson antenna protein.......36, containing a putative bacteriochlorophyll a binding domain, and a short helix in the C-terminal part extending from residues M41 to G49. These elements are compatible with a model of CsmA having the long N-terminal α-helical stretch immersed into the lipid monolayer confining the chlorosome...

  19. Magnetic microparticle-based multimer detection system for the detection of prion oligomers in sheep

    Directory of Open Access Journals (Sweden)

    Lim K

    2015-09-01

    Full Text Available Kuntaek Lim,1 Su Yeon Kim,2 Byoungsub Lee,1 Christiane Segarra,3 Sungmin Kang,1 Youngran Ju,2 Mary Jo Schmerr,4 Joliette Coste,3 Sang Yun Kim,5 Takashi Yokoyama,6 Seong Soo A An7 1Department of Research and Development, PeopleBio Inc., 2Department of Arborbiology, Korean Center for Diseases and Control (KCDC, Seoul, Republic of Korea; 3Department of Blood Screening, Etablissement Français Du Sang (EFS, Montpellier, France; 4Ames Laboratories, US Department of Energy (USDOE, Iowa State University, Ames, IA, USA; 5Department of Neurology, Seoul National University Bundang Hospital, Sungnam-si, Republic of Korea; 6Department of Prion Research, National Institute of Animal Health, Tsukuba, Japan; 7Department of Bionano Technology, Gachon University, Sungnam-si, Republic of Korea Abstract: Transmissible spongiform encephalopathies (TSEs are zoonotic fatal neurodegenerative diseases in animals and humans. TSEs are commonly known as bovine spongiform encephalopathy in cattle, scrapie in sheep and goats, chronic wasting disease in cervids, and Creutzfeldt–Jakob disease in humans. The putative transmissible agents are infectious prion proteins (PrPSc, which are formed by the conversion of the normal prion protein on the glycoprotein cell surface in the presence of other PrPSc. Reports of the transmission of TSEs through blood raised considerable concern about the safety of blood and blood products. To address this issue, many laboratories attempted to develop a sensitive and accurate blood diagnostic test to detect PrPSc. Previously, we reported that, compared to normal controls, the multimer detection system (MDS was more efficient in detecting PrPSc in infected hamster brain homogenate, mouse plasma spiked with purified PrPSc from scrapie mouse brain, and scrapie-infected hamster plasmas. MDS differentiates prion multimers from the cellular monomer through the multimeric expression of epitopes on prion multimers, in contrast to the monomeric form

  20. [Determination of von Willebrand factor multimers in Mexican population].

    Science.gov (United States)

    Hernández-Zamora, Edgar; Zavala-Hernández, Cesar; Viveros-Sandoval, Martha Eva; Ochoa-Rico, Angeles; Martínez-Murillo, Carlos; Reyes-Maldonado, Elba

    2014-01-01

    Antecedentes: la enfermedad de von Willebrand es un padecimiento hereditario en el que la estructura, función y concentración del factor de von Willebrand están alteradas y, en consecuencia, también la interacción plaqueta-factor de von Willebrand-endotelio. En México no hay registros epidemiológicos de la enfermedad, sólo se han efectuado algunos estudios aislados desde el punto de vista clínico y hematológico. Material y métodos: estudio retrospectivo efectuado en 155 mexicanos mestizos, 75 de ellos con diagnóstico presuntivo de enfermedad de von Willebrand, 15 con sospecha de hemofilia A y 65 donadores sanos (testigos). Se realizaron pruebas: básicas de coagulación, especiales y de clasificación: análisis de la composición multimérica. Resultados: 15 pacientes se diagnosticaron con hemofilia A; de los 75 sujetos con sospecha de enfermedad de von Willebrand se diagnosticaron 50 de la manera siguiente: tipo 1 (62%), tipo 2 (22%) [subtipos: 2A (14%), 2B (2%) y 2N (6%)] y tipo 3 (16%). Conclusión: el análisis de los multímeros del factor de von Willebrand es un método que cumple con las características adecuadas para el diagnóstico de la enfermedad de von Willebrand, por lo que es necesario implementar esta metodología para su estudio y mejorar su diagnóstico específico.

  1. TMAC: Timestamp-Ordered MAC for CSMA/CA Wireless Mesh Networks

    KAUST Repository

    Nawab, Faisal Saud Yousef

    2011-07-31

    We propose TMAC, a timestamp-ordered MAC protocol for Wireless Mesh Networks (WMNs). TMAC extends CSMA/CA by scheduling data packets based on their age. Prior to transmitting a data packet, a transmitter broadcasts a request control message appended with a timestamp to a selected list of neighbors. It can proceed with the transmission only if it receives a sufficient number of grant control messages from these neighbors. A grant message indicates that the associated data packet has the lowest timestamp of all the packets pending transmission at the local transmit queue. We demonstrate that a loose ordering of timestamps among neighboring nodes is sufficient for enforcing local fairness, subsequently leading to flow rate fairness in a multi-hop WMN. We show that TMAC can be implemented using the control frames in IEEE 802.11 stack, and thus can be easily integrated in existing 802.11-based WMNs. Our simulation results show that TMAC achieves excellent resource allocation fairness while maintaining over 90% of maximum link capacity in parking lot and large grid topologies.

  2. Analysis of Non-Persistent CSMA Protocols with Exponential Backoff Scheduling

    CERN Document Server

    Yin, Dongjie; Lee, Tony T

    2010-01-01

    This paper studies the performance of Non-persistent CSMA/CA protocols with K-Exponential Backoff scheduling algorithms. A multi-queue single-server system is proposed to model multiple access networks. The input buffer of each access node is modeled as a Geo/G/1 queue, and the service time distribution of head-of-line packets is derived from the Markov chain of underlying scheduling algorithm. The main results include the complete analysis of the throughput and delay distribution, from which we obtained stable regions with respect to the throughput and bounded mean delay of the Geometric Retransmission and Exponential Backoff schemes. We show that the throughput stable region of Geometric Retransmission will vanish as the number of nodes n \\rightarrow \\infty; thus, it is inherently unstable for large n. In contrast to Geometric Retransmission, the throughput stable region of Exponential Backoff can be obtained for an infinite population. We found that the bounded mean delay region of Geometric Retransmission...

  3. Antibody Stabilization of Peptide–MHC Multimers Reveals Functional T Cells Bearing Extremely Low-Affinity TCRs

    DEFF Research Database (Denmark)

    Tungatt, Katie; Bianchi, Valentina; Crowther, Michael D;

    2015-01-01

    Fluorochrome-conjugated peptide-MHC (pMHC) multimers are commonly used in combination with flow cytometry for direct ex vivo visualization and characterization of Ag-specific T cells, but these reagents can fail to stain cells when TCR affinity and/or TCR cell-surface density are low. pMHC multim...

  4. Performance Optimization of Priority Assisted CSMA/CA Mechanism of 802.15.6 under Saturation Regime.

    Science.gov (United States)

    Shakir, Mustafa; Rehman, Obaid Ur; Rahim, Mudassir; Alrajeh, Nabil; Khan, Zahoor Ali; Khan, Mahmood Ashraf; Niaz, Iftikhar Azim; Javaid, Nadeem

    2016-09-02

    Due to the recent development in the field of Wireless Sensor Networks (WSNs), the Wireless Body Area Networks (WBANs) have become a major area of interest for the developers and researchers. Human body exhibits postural mobility due to which distance variation occurs and the status of connections amongst sensors change time to time. One of the major requirements of WBAN is to prolong the network lifetime without compromising on other performance measures, i.e., delay, throughput and bandwidth efficiency. Node prioritization is one of the possible solutions to obtain optimum performance in WBAN. IEEE 802.15.6 CSMA/CA standard splits the nodes with different user priorities based on Contention Window (CW) size. Smaller CW size is assigned to higher priority nodes. This standard helps to reduce delay, however, it is not energy efficient. In this paper, we propose a hybrid node prioritization scheme based on IEEE 802.15.6 CSMA/CA to reduce energy consumption and maximize network lifetime. In this scheme, optimum performance is achieved by node prioritization based on CW size as well as power in respective user priority. Our proposed scheme reduces the average back off time for channel access due to CW based prioritization. Additionally, power based prioritization for a respective user priority helps to minimize required number of retransmissions. Furthermore, we also compare our scheme with IEEE 802.15.6 CSMA/CA standard (CW assisted node prioritization) and power assisted node prioritization under postural mobility in WBAN. Mathematical expressions are derived to determine the accurate analytical model for throughput, delay, bandwidth efficiency, energy consumption and life time for each node prioritization scheme. With the intention of analytical model validation, we have performed the simulations in OMNET++/MIXIM framework. Analytical and simulation results show that our proposed hybrid node prioritization scheme outperforms other node prioritization schemes in

  5. Performance Optimization of Priority Assisted CSMA/CA Mechanism of 802.15.6 under Saturation Regime

    Science.gov (United States)

    Shakir, Mustafa; Rehman, Obaid Ur; Rahim, Mudassir; Alrajeh, Nabil; Khan, Zahoor Ali; Khan, Mahmood Ashraf; Niaz, Iftikhar Azim; Javaid, Nadeem

    2016-01-01

    Due to the recent development in the field of Wireless Sensor Networks (WSNs), the Wireless Body Area Networks (WBANs) have become a major area of interest for the developers and researchers. Human body exhibits postural mobility due to which distance variation occurs and the status of connections amongst sensors change time to time. One of the major requirements of WBAN is to prolong the network lifetime without compromising on other performance measures, i.e., delay, throughput and bandwidth efficiency. Node prioritization is one of the possible solutions to obtain optimum performance in WBAN. IEEE 802.15.6 CSMA/CA standard splits the nodes with different user priorities based on Contention Window (CW) size. Smaller CW size is assigned to higher priority nodes. This standard helps to reduce delay, however, it is not energy efficient. In this paper, we propose a hybrid node prioritization scheme based on IEEE 802.15.6 CSMA/CA to reduce energy consumption and maximize network lifetime. In this scheme, optimum performance is achieved by node prioritization based on CW size as well as power in respective user priority. Our proposed scheme reduces the average back off time for channel access due to CW based prioritization. Additionally, power based prioritization for a respective user priority helps to minimize required number of retransmissions. Furthermore, we also compare our scheme with IEEE 802.15.6 CSMA/CA standard (CW assisted node prioritization) and power assisted node prioritization under postural mobility in WBAN. Mathematical expressions are derived to determine the accurate analytical model for throughput, delay, bandwidth efficiency, energy consumption and life time for each node prioritization scheme. With the intention of analytical model validation, we have performed the simulations in OMNET++/MIXIM framework. Analytical and simulation results show that our proposed hybrid node prioritization scheme outperforms other node prioritization schemes in

  6. Performance Analyses and Improvements for the IEEE 802.15.4 CSMA/CA Scheme with Heterogeneous Buffered Conditions

    Directory of Open Access Journals (Sweden)

    Chunfeng Lv

    2012-04-01

    Full Text Available Studies of the IEEE 802.15.4 Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA scheme have been received considerable attention recently, with most of these studies focusing on homogeneous or saturated traffic. Two novel transmission schemes—OSTS/BSTS (One Service a Time Scheme/Bulk Service a Time Scheme—are proposed in this paper to improve the behaviors of time-critical buffered networks with heterogeneous unsaturated traffic. First, we propose a model which contains two modified semi-Markov chains and a macro-Markov chain combined with the theory of M/G/1/K queues to evaluate the characteristics of these two improved CSMA/CA schemes, in which traffic arrivals and accessing packets are bestowed with non-preemptive priority over each other, instead of prioritization. Then, throughput, packet delay and energy consumption of unsaturated, unacknowledged IEEE 802.15.4 beacon-enabled networks are predicted based on the overall point of view which takes the dependent interactions of different types of nodes into account. Moreover, performance comparisons of these two schemes with other non-priority schemes are also proposed. Analysis and simulation results show that delay and fairness of our schemes are superior to those of other schemes, while throughput and energy efficiency are superior to others in more heterogeneous situations. Comprehensive simulations demonstrate that the analysis results of these models match well with the simulation results.

  7. Performance Analyses and Improvements for the IEEE 802.15.4 CSMA/CA Scheme with Heterogeneous Buffered Conditions

    Science.gov (United States)

    Zhu, Jianping; Tao, Zhengsu; Lv, Chunfeng

    2012-01-01

    Studies of the IEEE 802.15.4 Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) scheme have been received considerable attention recently, with most of these studies focusing on homogeneous or saturated traffic. Two novel transmission schemes—OSTS/BSTS (One Service a Time Scheme/Bulk Service a Time Scheme)—are proposed in this paper to improve the behaviors of time-critical buffered networks with heterogeneous unsaturated traffic. First, we propose a model which contains two modified semi-Markov chains and a macro-Markov chain combined with the theory of M/G/1/K queues to evaluate the characteristics of these two improved CSMA/CA schemes, in which traffic arrivals and accessing packets are bestowed with non-preemptive priority over each other, instead of prioritization. Then, throughput, packet delay and energy consumption of unsaturated, unacknowledged IEEE 802.15.4 beacon-enabled networks are predicted based on the overall point of view which takes the dependent interactions of different types of nodes into account. Moreover, performance comparisons of these two schemes with other non-priority schemes are also proposed. Analysis and simulation results show that delay and fairness of our schemes are superior to those of other schemes, while throughput and energy efficiency are superior to others in more heterogeneous situations. Comprehensive simulations demonstrate that the analysis results of these models match well with the simulation results. PMID:22666076

  8. Performance Analysis of IEEE 802.15.6 CSMA/CA Protocol for WBAN Medical Scenario through DTMC Model.

    Science.gov (United States)

    Kumar, Vivek; Gupta, Bharat

    2016-12-01

    The newly drafted IEEE 802.15.6 standard for Wireless Body Area Networks (WBAN) has been concentrating on a numerous medical and non-medical applications. Such short range wireless communication standard offers ultra-low power consumption with variable data rates from few Kbps to Mbps in, on or around the proximity of the human body. In this paper, the performance analysis of carrier sense multiple access with collision avoidance (CSMA/CA) scheme based on IEEE 802.15.6 standard in terms of throughput, reliability, clear channel assessment (CCA) failure probability, packet drop probability, and end-to-end delay has been presented. We have developed a discrete-time Markov chain (DTMC) to significantly evaluate the performances of IEEE 802.15.6 CSMA/CA under non-ideal channel condition having saturated traffic condition including node wait time and service time. We also visualize that, as soon as the payload length increases the CCA failure probability increases, which results in lower node's reliability. Also, we have calculated the end-to-end delay in order to prioritize the node wait time cause by backoff and retransmission. The user priority (UP) wise DTMC analysis has been performed to show the importance of the standard especially for medical scenario.

  9. Performance analyses and improvements for the IEEE 802.15.4 CSMA/CA scheme with heterogeneous buffered conditions.

    Science.gov (United States)

    Zhu, Jianping; Tao, Zhengsu; Lv, Chunfeng

    2012-01-01

    Studies of the IEEE 802.15.4 Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) scheme have been received considerable attention recently, with most of these studies focusing on homogeneous or saturated traffic. Two novel transmission schemes-OSTS/BSTS (One Service a Time Scheme/Bulk Service a Time Scheme)-are proposed in this paper to improve the behaviors of time-critical buffered networks with heterogeneous unsaturated traffic. First, we propose a model which contains two modified semi-Markov chains and a macro-Markov chain combined with the theory of M/G/1/K queues to evaluate the characteristics of these two improved CSMA/CA schemes, in which traffic arrivals and accessing packets are bestowed with non-preemptive priority over each other, instead of prioritization. Then, throughput, packet delay and energy consumption of unsaturated, unacknowledged IEEE 802.15.4 beacon-enabled networks are predicted based on the overall point of view which takes the dependent interactions of different types of nodes into account. Moreover, performance comparisons of these two schemes with other non-priority schemes are also proposed. Analysis and simulation results show that delay and fairness of our schemes are superior to those of other schemes, while throughput and energy efficiency are superior to others in more heterogeneous situations. Comprehensive simulations demonstrate that the analysis results of these models match well with the simulation results.

  10. Association of bacteriochlorophyll a with the CsmA protein in chlorosomes of the photosynthetic green filamentous bacterium Chloroflexus aurantiacus

    DEFF Research Database (Denmark)

    Sakuragi, Y; Frigaard, N-U; Shimada, K;

    1999-01-01

    . Subsequent proteinase K treatment of these HD-treated chlorosomes caused digestion of CsmA and a simultaneous decrease of the BChl a absorption band. Based on these results, we suggest that CsmA is associated with BChl a in the chlorosomes. This suggestion was supported by the measured stoichiometric ratio...... alkaline treatment, only the 5.7 kDa CsmA protein was removed from the chlorosomes among six proteins detected by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) analysis, concomitantly with the disappearance of BChl a absorption at 795 nm. Trypsin treatment removed two proteins...... with molecular masses of 11 and 18 kDa (CsmN and CmsM), whereas the spectral properties of BChl a and BChl c were not changed. By the new hexanol-detergent (HD) treatment, most BChl c and all of the detected proteins except CsmA were removed from the chlorosomes without changing the BChl a spectral properties...

  11. CSMA/CD网与Token Bus网、Token Ring网的比较%The Comparison of CSMA/CD Network,Token Bus network and Token Ring network

    Institute of Scientific and Technical Information of China (English)

    王海芹; 马晓东; 黄彦丽

    2009-01-01

    局域网产生于20世纪70年代,由于微型计算机的发明和迅速普及以及网络的出现和深入发展,局域网得到了长足的发展.当今的局域网按照共享介质访问控制方法分类,可分为总线型网(CSMA/CD网)、令牌总线型网(Token Bus网)、令牌环型网(Token Ring网).通过对这三种不同局域网的比较,进一步理解不同网络的相关特性,从而针对不同的网络给出相适应的组网方式.

  12. 基于队列理论CSMA/CA机制的无线传感器异构机制OSTS的实时性分析%Delay analysis for OSTS scheme of CSMA/CA with heterogeneous unsaturated conditions

    Institute of Scientific and Technical Information of China (English)

    吕春峰; 朱建平

    2012-01-01

    自从IEEE 802.15.4标准发布以来,基于低功耗、低速率传输的无线传感器网络的应用几乎涉及到现实生活的方方面面;但是关于这个标准的CSMA/CA机制大部分都是基于均匀、饱和的传感器网络应用。文中针对非饱和、带缓存的无线传感器异构网络,提出了一种新的异构的CSMA/CA机制OSTS。该机制采用2个马尔可夫链来分别表示异构节点访问信道的过程、一个宏观马尔可夫链来表达信道状态转移,且结合M/G/1/K队列理论分析数据包传送的实时性能,并相应地改进系统的实时性。文中最大的特点是两组非均匀节点被赋予了公平的机会访问信道,而不存在优先权的问题。此外,详细分析了这种机制的数据包传送时间,包括数据包到达率、包大小、节点数量、缓存大小等参数对系统实时性的影响;这些分析结果与我们采用NS-2工具仿真的结果十分吻合。%Analyses of IEEE 802.15.4 Carrier Sense Multiple Access with Collision Avoidance(CSMA/CA) mechanism have received considerable attention recently,and most of these analyses focus on homogeneous or saturated traffic.In this paper,we propose a new CSMA/CA scheme OSTS to evaluate and improve the performance of heterogeneous buffered networks which is more realistic in our applications.We adopt two modified semi-Markov chains with one macro-Markov chain and the theory of M/G/1/K queues to evaluate characteristics of our time-critical non-priority network.Packet delay of unsaturated,unacknowledged 802.15.4 beacon enabled networks based on these models are predicted,including the impact of different parameters such as packet arrival rate,packet size,node’s buffer size and the number of different kinds of nodes.Comprehensive simulation results are consistent with the predictions of these models.

  13. Formation of highly ordered multimers in G-quadruplexes.

    Science.gov (United States)

    Tóthová, Petra; Krafčíková, Petra; Víglaský, Viktor

    2014-11-18

    G-Rich DNA and RNA have a higher propensity to form G-quadruplex structures, but the presence of G-runs alone is not sufficient to prove that such sequences can form stable G-quadruplexes. While G-rich sequences are essential for G-quadruplex formation, not all G-rich sequences have the propensity to form G-quadruplex structures. In addition, monovalent metal ions, dehydrating agents, and loop sequences connecting the G-runs also play important roles in the topology of G-quadruplex folding. To date, no quantitative analysis of the CD spectra of G-quadruplexes in confrontation with the electrophoretic results has been performed. Therefore, in this study, we use information gained through the analysis of a series of well-known G-quadruplex-forming sequences to evaluate other less-studied sets of aptameric sequences. A simple and cost-effective methodology that can verify the formation of G-quadruplex motifs from oligomeric DNA sequences and a technique to determine the molecularity of these structures are also described. This methodology could be of great use in the prediction of G-quadruplex assembly, and the basic principles of our techniques can be extrapolated for any G-rich DNA sequences. This study also presents a model that can predict the multimerization of G-quadruplexes; the predictions offered by this model are shown to match the results obtained using circular dichroism.

  14. Réflexions linguistiques et sémiologiques pour une écriture didactique du multimédia de langues Linguistic and "semiologic" reflections to set out a multimedia approach for foreign languages teaching and learning

    Directory of Open Access Journals (Sweden)

    Anne-Laure Foucher

    1998-06-01

    Full Text Available Dans une combinaison originale de domaines souvent envisagés de manière fermée que sont la didactique des langues, la linguistique, la sémiologie et l'ALAO (Apprentissage des Langues Assisté par Ordinateur, nous mettons en avant la nécessité de concevoir l'image multimédia comme un objet composite, lieu véritable d'interactions entre modes iconique, auditif et linguistique. De cette option théorique découle, selon nous, une philosophie qui préside à la conception d'un multimédia pour l'apprentissage des langues. Nous en donnons les grandes lignes sous forme de jalons méthodologiques destinés à une écriture du multimédia en langues.Assuming CALL to need language didactics, assuming didactics to need linguistics and CALL to need minimal " semiologic " reflections, we show how is profitable to adopt a didactic point of view linking linguistic and semiologic aspects in order to examine the contributions to learning of a multimedia approach for foreign languages. To complete these theorical considerations, we propose to set out methodological advice to design a multimedia approach for language learning and teaching.

  15. CsmA Protein is Associated with BChl a in the Baseplate Subantenna of Chlorosomes of the Photosynthetic Green Filamentous Bacterium Oscillochloris trichoides belonging to the Family Oscillochloridaceae

    OpenAIRE

    Anastasiya Zobova; Alexandra Taisova; Eugeny Lukashev; Nataliya Fedorova; Ludmila Baratova; Zoya Fetisova

    2011-01-01

    The baseplate subantenna in chlorosomes of green anoxygenic photosynthetic bacteria, belonging to the families Chloroflexaceae and Chlorobiaceae, is known to represent a complex of bacteriochlorophyll (BChl) a with the ~6 kDa CsmA proteins. Earlier, we showed the existence of a similar BChl a subantenna in chlorosomes of the photosynthetic green bacterium Oscillochloris trichoides, member of Oscillochloridaceae, the third family of green photosynthetic bacteria. However, this BChl a subantenn...

  16. CsmA Protein is Associated with BChl a in the Baseplate Subantenna of Chlorosomes of the Photosynthetic Green Filamentous Bacterium Oscillochloris trichoides belonging to the Family Oscillochloridaceae

    Directory of Open Access Journals (Sweden)

    Anastasiya Zobova

    2011-01-01

    Full Text Available The baseplate subantenna in chlorosomes of green anoxygenic photosynthetic bacteria, belonging to the families Chloroflexaceae and Chlorobiaceae, is known to represent a complex of bacteriochlorophyll (BChl a with the ~6 kDa CsmA proteins. Earlier, we showed the existence of a similar BChl a subantenna in chlorosomes of the photosynthetic green bacterium Oscillochloris trichoides, member of Oscillochloridaceae, the third family of green photosynthetic bacteria. However, this BChl a subantenna was not visually identified in absorption spectra of isolated Osc. trichoides chlorosomes in contrast to those of Chloroflexaceae and Chlorobiaceae. In this work, using room and low-temperature absorbance and fluorescence spectroscopy and sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis of alkaline-treated and untreated chlorosomes of Osc. trichoides, we showed that the baseplate BChl a subantenna does exist in Oscillochloridaceae chlorosomes as a complex of BChl a with the 5.7 kDa CsmA protein. The present results support the idea that the baseplate subantenna, representing a complex of BChl a with a ~6 kDa CsmA protein, is a universal interface between the BChl c subantenna of chlorosomes and the nearest light-harvesting BChl a subantenna in all three known families of green anoxygenic photosynthetic bacteria.

  17. Nicolas Guichon, Langues et TICE. Méthodologie de conception multimédia

    OpenAIRE

    Dan Frost

    2014-01-01

    Nicolas Guichon est enseignant-chercheur en anglais et en didactique des langues au centre de langues de l’université Lumière (Lyon 2). Il est concepteur du logiciel Virtual Cabinet, responsable de l’enseignement TICE du master « Didactique des langues et TICE » et membre de l’équipe Plurilinguisme et multimédia (ENS de Lyon). Cet ouvrage est le fruit de son expérience dans le domaine des recherches, du développement et de l’enseignement dans l’univers des TICE et de l’apprentissage des langu...

  18. Estudio Clásico de Estabilidad Transitoria para Sistemas Multimáquina

    Directory of Open Access Journals (Sweden)

    José Alejandro Morones Alba

    2000-01-01

    Full Text Available En este artículo se muestra una descripción del modelo matemático en el que se basa el diseño de un simulador para el estudio clásico de estabilidad transitoria en Sistemas Eléctricos de Potencia. El simulador determina el comportamiento transitorio de primera oscilación para sistemas multimáquina ante disturbios como fallas trifásicas, cambios de configuración, pérdida de carga y pérdida de generación.

  19. Enhancing antisense efficacy with multimers and multi-targeting oligonucleotides (MTOs) using cleavable linkers.

    Science.gov (United States)

    Subramanian, Romesh R; Wysk, Mark A; Ogilvie, Kathleen M; Bhat, Abhijit; Kuang, Bing; Rockel, Thomas D; Weber, Markus; Uhlmann, Eugen; Krieg, Arthur M

    2015-10-30

    The in vivo potency of antisense oligonucleotides (ASO) has been significantly increased by reducing their length to 8-15 nucleotides and by the incorporation of high affinity RNA binders such as 2', 4'-bridged nucleic acids (also known as locked nucleic acid or LNA, and 2',4'-constrained ethyl [cET]). We now report the development of a novel ASO design in which such short ASO monomers to one or more targets are co-synthesized as homo- or heterodimers or multimers via phosphodiester linkers that are stable in plasma, but cleaved inside cells, releasing the active ASO monomers. Compared to current ASOs, these multimers and multi-targeting oligonucleotides (MTOs) provide increased plasma protein binding and biodistribution to liver, and increased in vivo efficacy against single or multiple targets with a single construct. In vivo, MTOs synthesized in both RNase H-activating and steric-blocking oligonucleotide designs provide ≈4-5-fold increased potency and ≈2-fold increased efficacy, suggesting broad therapeutic applications. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

  20. HTML5 e as possibilidades narrativas jornalísticas na infografia multimídia

    Directory of Open Access Journals (Sweden)

    Walter Teixeira Lima Junior

    2015-12-01

    Full Text Available O artigo propõe o estudo comparativo dos infográficos multimídia produzidos pelos sites Clarín.com, da Argentina e Folha.com, do Brasil. A pesquisa tem como objetivo verificar e analisar como esses dois importantes veículos de comunicação online da América Latina têm utilizado a tecnologia HTML5 e suas possibilidades interativas na narrativa jornalística. Para tanto, a análise vai se ater à infografia multimídia, que tem passado por profundas mudanças tecnológicas, alterando o formato e o conteúdo da notícia. Para abordar as possibilidades narrativas das tecnologias Flash e HTLM5 na produção de infográficos interativos, o trabalho compara as seções Infográficos, veiculada pela Folha.com, e Especiales Multimedia, do Clarín.com. O estudo, quantitativo e qualitativo, verificou quais recursos narrativos e informativos, ferramentas e tecnologias de linguagem de programação para Internet foram utilizados pelos dois meios de comunicação, com base no modelo de análise proposto por Alberto Cairo no livro Infografia 2.0.

  1. The discrete time multichannel three-dimensional probability CSMA with function of monitoring based IoT

    Directory of Open Access Journals (Sweden)

    Zhou Sheng Jie

    2016-01-01

    Full Text Available Currently, with the rapid development of Internet of Things (IoT, users demand more and more personalized and diversified business categories, radio spectrum increasingly tense. With the exploiting of Transmission Control Protocol/Internet Protocol (TCP / IP protocol, network achieves the objects of the intelligent identifying, locating, tracking, monitoring and managing a network. Multichannel random access mechanism maximizes the utilization of constrained spectrum resources and allocating scarce channel resources to disparate hierarchical according to business priorities with various qualitiy of service (QoS requirements. In this paper, we propose a MAC design combining them together in one unit system under three-dimensional probability CSMA (Carrier Sense Multiple Access adopting the average cycle analysis method to analysis. Through the paper, precise mathematical value of system throughput is got by rigorous derivations under many circumstances. The correctness of the theory and model is demonstrated with simulation results and effectiveness illustrated. In the offline phase, simulation results verify that the proposed algorithm can improves the controllability of the system, the channel utilization, system security, and reliability of packet transmission and meet the different priorities of different QoS requirements.

  2. Pràctica final de l'assignatura "Disseny Gràfic" (Grau de Multimèdia)

    OpenAIRE

    2010-01-01

    Pràctica final de l'assignatura "Disseny Gràfic" (Grau de Multimèdia). Final practice of the "Graphic Design" course (Degree of Multimedia). Práctica final de la asignatura "Diseño Gráfico" (Grado de Multimedia).

  3. Spectroscopic properties of a reconstituted light-harvesting complex from the green sulfur bacterium Chlorobium tepidum containing CsmA and bacteriochlorophyll a

    DEFF Research Database (Denmark)

    Pedersen, Marie Østergaard; Pham, Lan; Steensgaard, Dorte Bjerre

    2008-01-01

    Green sulfur bacteria possess two light-harvesting antenna systems, the chlorosome and the Fenna-Matthews-Olson (FMO) protein. In addition to self-aggregated bacteriochlorophyll (BChl) c, chlorosomes of Chlorobium tepidum contain a small amount of BChl a (ratio 100:1). The chlorosomal BChl......-PAGE. Mass spectrometric analysis showed an m/z of 6154.8, in agreement with the calculated mass of the csmA gene product after C-terminal processing. CD spectroscopy of the isolated protein showed that the main structural motif was an R-helix. We have reconstituted the isolated CsmA protein with BChl...

  4. HLA micropolymorphisms strongly affect peptide-MHC multimer-based monitoring of antigen-specific CD8+ T cell responses.

    Science.gov (United States)

    van Buuren, Marit M; Dijkgraaf, Feline E; Linnemann, Carsten; Toebes, Mireille; Chang, Cynthia X L; Mok, Juk Yee; Nguyen, Melanie; van Esch, Wim J E; Kvistborg, Pia; Grotenbreg, Gijsbert M; Schumacher, Ton N M

    2014-01-15

    Peptide-MHC (pMHC) multimers have become one of the most widely used tools to measure Ag-specific T cell responses in humans. With the aim of understanding the requirements for pMHC-based personalized immunomonitoring, in which individuals expressing subtypes of the commonly studied HLA alleles are encountered, we assessed how the ability to detect Ag-specific T cells for a given peptide is affected by micropolymorphic differences between HLA subtypes. First, analysis of a set of 10 HLA-A*02:01-restricted T cell clones demonstrated that staining with pMHC multimers of seven distinct subtypes of the HLA-A*02 allele group was highly variable and not predicted by sequence homology. Second, to analyze the effect of minor sequence variation in a clinical setting, we screened tumor-infiltrating lymphocytes of an HLA-A*02:06 melanoma patient with either subtype-matched or HLA-A*02:01 multimers loaded with 145 different melanoma-associated Ags. This revealed that of the four HLA-A*02:06-restricted melanoma-associated T cell responses observed in this patient, two responses were underestimated and one was overlooked when using subtype-mismatched pMHC multimer collections. To our knowledge, these data provide the first demonstration of the strong effect of minor sequence variation on pMHC-based personalized immunomonitoring, and they provide tools to prevent this issue for common variants within the HLA-A*02 allele group.

  5. Seed-specific expression of spider silk protein multimers causes long-term stability

    Directory of Open Access Journals (Sweden)

    Nicola eWeichert

    2016-01-01

    Full Text Available Seeds enable plants to germinate and to grow in situations of limited availability of nutrients. The stable storage of different seed proteins is a remarkable presumption for successful germination and growth. These strategies have been adapted and used in several molecular farming projects. In this study, we explore the benefits of seed-based expression to produce the high molecular weight spider silk protein FLAG using intein-based trans-splicing. Multimers larger than 460 kDa in size are routinely produced, which is above the native size of the FLAG protein. The storage of seeds for eight weeks and one year at an ambient temperature of 15°C does not influence the accumulation level. Even the extended storage time does not influence the typical pattern of multimerized bands. These results show that seeds are the method of choice for stable accumulation of products of complex transgenes and have the capability for long-term storage at moderate conditions, an important feature for the development of suitable downstream processes.

  6. Aquisição e complexidade em narrativas multimídia de aprendizagem

    Directory of Open Access Journals (Sweden)

    Vera Lúcia Menezes de Oliveira e Paiva

    2008-01-01

    Full Text Available Este artigo apresenta reflexões sobre a aquisição de língua inglesa, entendida como sistema complexo em uma perspectiva êmica. Para tanto, discute aspectos da pesquisa narrativa, da multimodalidade e da complexidade da aquisição de segunda língua. Como evidências empíricas da aquisição, esta pesquisa utiliza excertos de narrativas multimídia de aprendizagem de língua inglesa, em que os narradores revelam aspectos de seus processos de aprendizagem por meio de textos, hipertextos, imagens e sons. Essas narrativas mostram que o processo de aquisição é um sistema complexo e que a segunda língua emerge da interação entre as diferentes experiências de aprendizagem dentro e fora do ambiente escolar.This paper reflects upon the acquisition of English language, understood as a complex system, in the light of an emic approach. In order to do that, it discusses aspects of narrative research, of multimodality, and of the complexity of second language acquisition. As empirical evidences of acquisition, the article presents excerpts of multimedia language learning narratives through wich the authors reveal aspects of their learning processes by means of texts, hypertexts, images and sounds. Those narratives show that the acquisition process is a complex system and that the second language emerges from the interaction among the different learning experiences lived inside and outside the classroom.

  7. Shear-induced unfolding and enzymatic cleavage of full-length VWF multimers

    CERN Document Server

    Lippok, Svenja; Obser, Tobias; Kleemeier, Lars; Schneppenheim, Reinhard; Budde, Ulrich; Netz, Roland R; Rädler, Joachim O

    2015-01-01

    Proteolysis of the multimeric blood coagulation protein von Willebrand Factor (VWF) by ADAMTS13 is crucial for prevention of microvascular thrombosis. ADAMTS13 cleaves VWF within the mechanosensitive A2 domain, which is believed to open under shear flow. Here, we combine Fluorescence Correlation Spectroscopy (FCS) and a microfluidic shear cell to monitor real-time kinetics of full-length VWF proteolysis as a function of shear stress. For comparison, we also measure the Michaelis-Menten kinetics of ADAMTS13 cleavage of wild-type VWF in the absence of shear but partially denaturing conditions. Under shear, ADAMTS13 activity on full-length VWF arises without denaturing agent as evidenced by FCS and gel-based multimer analysis. In agreement with Brownian hydrodynamics simulations, we find a sigmoidal increase of the enzymatic rate as a function of shear at a threshold shear rate 5522/s. The same flow-rate dependence of ADAMTS13 activity we also observe in blood plasma, which is relevant to predict hemostatic dysf...

  8. A critical assessment for the value of markers to gate-out undesired events in HLA-peptide multimer staining protocols

    Directory of Open Access Journals (Sweden)

    Odunsi Kunle

    2011-07-01

    Full Text Available Abstract Background The introduction of antibody markers to identify undesired cell populations in flow-cytometry based assays, so called DUMP channel markers, has become a practice in an increasing number of labs performing HLA-peptide multimer assays. However, the impact of the introduction of a DUMP channel in multimer assays has so far not been systematically investigated across a broad variety of protocols. Methods The Cancer Research Institute's Cancer Immunotherapy Consortium (CRI-CIC conducted a multimer proficiency panel with a specific focus on the impact of DUMP channel use. The panel design allowed individual laboratories to use their own protocol for thawing, staining, gating, and data analysis. Each experiment was performed twice and in parallel, with and without the application of a dump channel strategy. Results The introduction of a DUMP channel is an effective measure to reduce the amount of non-specific MULTIMER binding to T cells. Beneficial effects for the use of a DUMP channel were observed across a wide range of individual laboratories and for all tested donor-antigen combinations. In 48% of experiments we observed a reduction of the background MULTIMER-binding. In this subgroup of experiments the median background reduction observed after introduction of a DUMP channel was 0.053%. Conclusions We conclude that appropriate use of a DUMP channel can significantly reduce background staining across a large fraction of protocols and improve the ability to accurately detect and quantify the frequency of antigen-specific T cells by multimer reagents. Thus, use of a DUMP channel may become crucial for detecting low frequency antigen-specific immune responses. Further recommendations on assay performance and data presentation guidelines for publication of MULTIMER experimental data are provided.

  9. IDEVI – informática básica para deficientes visuais: um software em multimídia

    OpenAIRE

    2000-01-01

    Este trabalho apresenta o desenvolvimento de um software educacional em multimídia, abordando a informática básica para portadores de deficiência visual. O software educacional IDEVI é uma ferramenta de aprendizagem dos conceitos básicos em computação. Divide-se em duas etapas. A primeira trata de um levantamento bibliográfico das alternativas tecnológicas, que oportunizam o conhecimento para o desenvolvimento profissional do portador de deficiência visual. A segunda etapa é a definição...

  10. Dispositifs de formation en anglais à l'Espace Multimédia (Montpellier-III. Description et approche critique Learning Modes in English at the Espace Multimédia (Montpellier-III. Description and Critical Approach.

    Directory of Open Access Journals (Sweden)

    Cécile Poussard

    1998-06-01

    Full Text Available Cet article présente l’Espace Multimédia de l’Université Paul-Valéry (Montpellier-III ; après une description du lieu, du public et des langues proposées, les auteurs proposent une description, assortie d’une évaluation critique des dispositifs mis en ouvre pour la formation en anglais des étudiants non-spécialistes. Pour le premier cycle, il s’agit d’un dispositif mixte, faisant alterner le travail autonome et les séances de groupe. Pour le second cycle, il s’agit d’un dispositif d’autoformation guidée, incluant des séances de tutorat, de travail autonome et de pratique orale.This article presents the Espace Multimédia (Université Paul-Valéry, Montpellier-III; after a short description of the site, its public and the languages concerned, the authors give a description, along with a critical evaluation of the learning modes at work for non-specialist students of English. For first and second year students, autonomous work and group work alternate. For third year students, a guided self-learning mode is provided, which includes tutorials, autonomous work and oral practice.

  11. Automated Analysis of Flow Cytometry Data to Reduce Inter-Lab Variation in the Detection of Major Histocompatibility Complex Multimer-Binding T Cells

    Directory of Open Access Journals (Sweden)

    Natasja Wulff Pedersen

    2017-07-01

    Full Text Available Manual analysis of flow cytometry data and subjective gate-border decisions taken by individuals continue to be a source of variation in the assessment of antigen-specific T cells when comparing data across laboratories, and also over time in individual labs. Therefore, strategies to provide automated analysis of major histocompatibility complex (MHC multimer-binding T cells represent an attractive solution to decrease subjectivity and technical variation. The challenge of using an automated analysis approach is that MHC multimer-binding T cell populations are often rare and therefore difficult to detect. We used a highly heterogeneous dataset from a recent MHC multimer proficiency panel to assess if MHC multimer-binding CD8+ T cells could be analyzed with computational solutions currently available, and if such analyses would reduce the technical variation across different laboratories. We used three different methods, FLOw Clustering without K (FLOCK, Scalable Weighted Iterative Flow-clustering Technique (SWIFT, and ReFlow to analyze flow cytometry data files from 28 laboratories. Each laboratory screened for antigen-responsive T cell populations with frequency ranging from 0.01 to 1.5% of lymphocytes within samples from two donors. Experience from this analysis shows that all three programs can be used for the identification of high to intermediate frequency of MHC multimer-binding T cell populations, with results very similar to that of manual gating. For the less frequent populations (<0.1% of live, single lymphocytes, SWIFT outperformed the other tools. As used in this study, none of the algorithms offered a completely automated pipeline for identification of MHC multimer populations, as varying degrees of human interventions were needed to complete the analysis. In this study, we demonstrate the feasibility of using automated analysis pipelines for assessing and identifying even rare populations of antigen-responsive T cells and discuss

  12. Biografia e Autobiografia Universal (Para um Modelo de Análise dos Rituais de Produção e Consumo na Arte Multimédia)

    OpenAIRE

    2011-01-01

    Mestrado em Arte Multimédia Biografia e Autobiografia Universal: para um modelo de análise dos rituais de produção e consumo na arte multimédia trata do estudo e análise de formas alternativas que questionam o modo como criamos a nossa memória cultural colectiva por meio de objectos e rituais. O campo de investigação aqui exposto permanece distinto da História ou Crítica da arte. A abordagem aos rituais é realizada pelo do ponto de vista sócio-cultural, ambicionando reco...

  13. Ion Mobility Measurements of Nondenatured 12-150 kDa Proteins and Protein Multimers by Tandem Differential Mobility Analysis-Mass Spectrometry (DMA-MS)

    Science.gov (United States)

    Hogan, Christopher J.; de la Mora, Juan Fernández

    2011-01-01

    The mobilities of electrosprayed proteins and protein multimers with molecular weights ranging from 12.4 kDa (cytochrome C monomers) to 154 kDa (nonspecific concanavalin A hexamers) were measured in dry air by a planar differential mobility analyzer (DMA) coupled to a time-of-flight mass spectrometer (TOF-MS). The DMA determines true mobility at atmospheric pressure, without perturbing ion structure from that delivered by the electrospray. A nondenaturing aqueous 20 mM triethylammonium formate buffer yields compact ions with low charge states, moderating polarization effects on ion mobility. Conversion of mobilities into cross-sections involves a reduction factor ξ for the actual mobility relative to that associated with elastic specular collisions with smooth surfaces. ξ is known to be 1.36 in air from Millikan's oil drop experiments. A similar enhancement effect ascribed to atomic-scale surface roughness has been found in numerical simulations. Adopting Millikan's value ξ = 1.36 and assuming a spherical geometry yields a gas-phase protein density ρ p = 0.949 ± 0.053 g cm-3 for all our protein data. This is substantially higher than the 0.67 g cm-3 found in recent low-resolution DMA measurements of singly charged proteins. DMA-MS can distinguish nonspecific protein aggregates formed during the electrospray process from those formed preferentially in solution. The observed charge versus diameter relation is compatible with a protein charge reduction mechanism based on the evaporation of triethylammonium ions from electrosprayed drops.

  14. Site-specific deletions of chromosomally located DNA segments with the multimer resolution system of broad-host-range plasmid RP4

    DEFF Research Database (Denmark)

    Sternberg, Claus; Eberl, Leo; Sanchezromero, Juan M.

    1995-01-01

    The multimer resolution system (mrs) of the broad-host-range plasmid RP4 has been exploited to develop a general method that permits the precise excision of chromosomal segments in a variety of gram-negative bacteria. The procedure is based on the site-specific recombination between two directly ...

  15. Aplicativo multimídia em plataforma móvel para o ensino da mensuração da pressão venosa central

    Directory of Open Access Journals (Sweden)

    Elizabeth Correia Ferreira Galvão

    2012-10-01

    Full Text Available O objetivo do estudo foi desenvolver e avaliar um aplicativo multimídia em plataforma móvel para o ensino da Mensuração da Pressão Venosa Central (PVC. A pesquisa foi desenvolvida em três fases (Levantamento das necessidades; Metodologia de desenvolvimento do aplicativo multimídia e Avaliação do aplicativo multimídia. A multimídia foi o método escolhido por favorecer um ambiente motivador e dinâmico, integrar imagens e textos num aplicativo disponível para celulares, constituindo-se um meio móvel e autônomo de aprendizagem. Os resultados permitem demonstrar a viabilidade do desenvolvimento da ferramenta para subsidiar a prática pedagógica e abrem perspectivas para acreditar que, na educação em Enfermagem, a tecnologia disponível pode descortinar novos modos de aprender significativamente.

  16. A BENCHMARKING ANALYSIS FOR FIVE RADIONUCLIDE VADOSE ZONE MODELS (CHAIN, MULTIMED_DP, FECTUZ, HYDRUS, AND CHAIN 2D) IN SOIL SCREENING LEVEL CALCULATIONS

    Science.gov (United States)

    Five radionuclide vadose zone models with different degrees of complexity (CHAIN, MULTIMED_DP, FECTUZ, HYDRUS, and CHAIN 2D) were selected for use in soil screening level (SSL) calculations. A benchmarking analysis between the models was conducted for a radionuclide (99Tc) rele...

  17. Severe Plasmodium falciparum malaria is associated with circulating ultra-large von Willebrand multimers and ADAMTS13 inhibition.

    LENUS (Irish Health Repository)

    Larkin, Deirdre

    2009-03-01

    Plasmodium falciparum infection results in adhesion of infected erythrocytes to blood vessel endothelium, and acute endothelial cell activation, together with sequestration of platelets and leucocytes. We have previously shown that patients with severe infection or fulminant cerebral malaria have significantly increased circulatory levels of the adhesive glycoprotein von Willebrand factor (VWF) and its propeptide, both of which are indices of endothelial cell activation. In this prospective study of patients from Ghana with severe (n = 20) and cerebral (n = 13) P. falciparum malaria, we demonstrate that increased plasma VWF antigen (VWF:Ag) level is associated with disproportionately increased VWF function. VWF collagen binding (VWF:CB) was significantly increased in patients with cerebral malaria and severe malaria (medians 7.6 and 7.0 IU\\/ml versus 1.9 IU\\/ml; p<0.005). This increased VWF:CB correlated with the presence of abnormal ultra-large VWF multimers in patient rather than control plasmas. Concomitant with the increase in VWF:Ag and VWF:CB was a significant persistent reduction in the activity of the VWF-specific cleaving protease ADAMTS13 (approximately 55% of normal; p<0.005). Mixing studies were performed using P. falciparum patient plasma and normal pooled plasma, in the presence or absence of exogenous recombinant ADAMTS13. These studies demonstrated that in malarial plasma, ADAMTS13 function was persistently inhibited in a time-dependent manner. Furthermore, this inhibitory effect was not associated with the presence of known inhibitors of ADAMTS13 enzymatic function (interleukin-6, free haemoglobin, factor VIII or thrombospondin-1). These novel findings suggest that severe P. falciparum infection is associated with acute endothelial cell activation, abnormal circulating ULVWF multimers, and a significant reduction in plasma ADAMTS13 function which is mediated at least in part by an unidentified inhibitor.

  18. Severe Plasmodium falciparum malaria is associated with circulating ultra-large von Willebrand multimers and ADAMTS13 inhibition.

    Directory of Open Access Journals (Sweden)

    Deirdre Larkin

    2009-03-01

    Full Text Available Plasmodium falciparum infection results in adhesion of infected erythrocytes to blood vessel endothelium, and acute endothelial cell activation, together with sequestration of platelets and leucocytes. We have previously shown that patients with severe infection or fulminant cerebral malaria have significantly increased circulatory levels of the adhesive glycoprotein von Willebrand factor (VWF and its propeptide, both of which are indices of endothelial cell activation. In this prospective study of patients from Ghana with severe (n = 20 and cerebral (n = 13 P. falciparum malaria, we demonstrate that increased plasma VWF antigen (VWF:Ag level is associated with disproportionately increased VWF function. VWF collagen binding (VWF:CB was significantly increased in patients with cerebral malaria and severe malaria (medians 7.6 and 7.0 IU/ml versus 1.9 IU/ml; p<0.005. This increased VWF:CB correlated with the presence of abnormal ultra-large VWF multimers in patient rather than control plasmas. Concomitant with the increase in VWF:Ag and VWF:CB was a significant persistent reduction in the activity of the VWF-specific cleaving protease ADAMTS13 (approximately 55% of normal; p<0.005. Mixing studies were performed using P. falciparum patient plasma and normal pooled plasma, in the presence or absence of exogenous recombinant ADAMTS13. These studies demonstrated that in malarial plasma, ADAMTS13 function was persistently inhibited in a time-dependent manner. Furthermore, this inhibitory effect was not associated with the presence of known inhibitors of ADAMTS13 enzymatic function (interleukin-6, free haemoglobin, factor VIII or thrombospondin-1. These novel findings suggest that severe P. falciparum infection is associated with acute endothelial cell activation, abnormal circulating ULVWF multimers, and a significant reduction in plasma ADAMTS13 function which is mediated at least in part by an unidentified inhibitor.

  19. Jornalismo e educomunicação: a produção de narrativas multimídia no ensino-aprendizagem

    Directory of Open Access Journals (Sweden)

    Adriana Alves Rodrigues

    2014-01-01

    Full Text Available A proposta principal do artigo é discutir a pertinência das reportagens multimídias desenvolvidas em sala de aula para a formação dos futuros jornalistas, produzida no primeiro semestre de 2013, por estudantes de graduação do quinto semestre do curso de Comunicação Social: habilitação em Jornalismo, da Universidade Estadual da Paraíba (UEPB. A ideia foi produzir um produto jornalístico multimídia, colocando em prática as discussões teóricas estudadas no decorrer das aulas. Tais produções visavam inserir os alunos nas práticas do jornalismo convergente contemporâneo, visualizando os diversos modos de produção jornalística no contexto da convergência midiática, mídias digitais e cibercultura.

  20. Lei da gravitação universal e os satélites: uma abordagem histórico-temática usando multimídia

    Directory of Open Access Journals (Sweden)

    Elvis Vilela Rodrigues

    2012-01-01

    Full Text Available Examina-se, neste artigo, o desenvolvimento de aulas de Física em que, usando-se uma multimídia, a Lei da Gravitação Universal é abordada de forma contextualizada a partir da História da Ciência e de um tema atual (os satélites. O objetivo foi examinar como estudantes de Ensino Médio aceitam e se envolvem nesse estudo. Usando uma abordagem metodológica qualitativa, a multimídia apresenta o que são e como funcionam os satélites artificiais, trazendo uma narrativa histórica desde as ideias de movimento do sistema planetário de Ptolomeu até as de Isaac Newton sobre o movimento dos corpos, culminando na Lei da Gravitação Universal. Entrevistas, observações de sala de aula e documentos produzidos pelos estudantes mostram que as imagens, os filmes e os textos contidos na multimídia enriquecem, de modo significativo, o conteúdo, facilitando o entendimento de conceitos da Física. A contextualização histórico-temática, por sua vez, produz maior envolvimento dos alunos no estudo da Física.

  1. Rhabdomyosarcome paratesticulaire (RMSP) multimétastatique : à propos d’un cas

    Science.gov (United States)

    Bennani, Hassan; Ziouziou, Imad; El Ghanmi, Jihad; Karmouni, Tarik; El Khader, Khalid; Koutani, Abdellatif; Andaloussi, Ahmed Iben Attya

    2014-01-01

    Résumé Nous rapportons, dans le présent article, le cas clinique d’un RMSP découvert à un stade tardif chez un adolescent, dans le but de confirmer l’évolution fatale de cette pathologie au potentiel métastatique « affreux ». Nous discutons aussi les causes du retard diagnostique, l’implication du sous-type histologique comme facteur pronostique et la place de la chimiothérapie dans le traitement des formes évoluées de la maladie. PMID:25295143

  2. Discovery of low-affinity preproinsulin epitopes and detection of autoreactive CD8 T-cells using combinatorial MHC multimers.

    Science.gov (United States)

    Unger, Wendy W; Velthuis, Jurjen; Abreu, Joana R F; Laban, Sandra; Quinten, Edwin; Kester, Michel G D; Reker-Hadrup, Sine; Bakker, Arnold H; Duinkerken, Gaby; Mulder, Arend; Franken, Kees L M C; Hilbrands, Robert; Keymeulen, Bart; Peakman, Mark; Ossendorp, Ferry; Drijfhout, Jan Wouter; Schumacher, Ton N; Roep, Bart O

    2011-11-01

    Autoreactive cytotoxic CD8 T-cells (CTLs) play a key pathogenic role in the destruction of insulin-producing beta-cells resulting in type 1 diabetes. However, knowledge regarding their targets is limited, restricting the ability to monitor the course of the disease and immune interventions. In a multi-step discovery process to identify novel CTL epitopes in human preproinsulin (PPI), PPI was digested with purified human proteasomes, and resulting COOH-fragments aligned with algorithm-predicted HLA-binding peptides to yield nine potential HLA-A1, -A2, -A3 or -B7-restricted candidates. An UV-exchange method allowed the generation of a repertoire of multimers including low-affinity HLA-binding peptides. These were labeled with quantum dot-fluorochromes and encoded in a combinatorial fashion, allowing parallel and sensitive detection of specific, low-avidity T-cells. Significantly increased frequencies of T-cells against four novel PPI epitopes (PPI(4-13)/B7, PPI(29-38)/A2, PPI(76-84)/A3 and PPI(79-88)/A3) were detected in stored blood of patients with recent onset diabetes but not in controls. Changes in frequencies of circulating CD8 T-cells against these novel epitopes were detected in blood of islet graft recipients at different time points after transplantation, which correlated with clinical outcome. In conclusion, our novel strategy involving a sensitive multiplex detection technology and requiring minimal volumes of stored blood represents a major improvement in the direct ex-vivo characterization and enumeration of immune cells in the pathogenesis of type 1 diabetes. Copyright © 2011 Elsevier Ltd. All rights reserved.

  3. Self-assembling SAS-6 multimer is a core centriole building block.

    Science.gov (United States)

    Gopalakrishnan, Jayachandran; Guichard, Paul; Smith, Andrew H; Schwarz, Heinz; Agard, David A; Marco, Sergio; Avidor-Reiss, Tomer

    2010-03-19

    Centrioles are conserved microtubule-based organelles with 9-fold symmetry that are essential for cilia and mitotic spindle formation. A conserved structure at the onset of centriole assembly is a "cartwheel" with 9-fold radial symmetry and a central tubule in its core. It remains unclear how the cartwheel is formed. The conserved centriole protein, SAS-6, is a cartwheel component that functions early in centriole formation. Here, combining biochemistry and electron microscopy, we characterize SAS-6 and show that it self-assembles into stable tetramers, which serve as building blocks for the central tubule. These results suggest that SAS-6 self-assembly may be an initial step in the formation of the cartwheel that provides the 9-fold symmetry. Electron microscopy of centrosomes identified 25-nm central tubules with repeating subunits and show that SAS-6 concentrates at the core of the cartwheel. Recombinant and native SAS-6 self-oligomerizes into tetramers with approximately 6-nm subunits, and these tetramers are components of the centrosome, suggesting that tetramers are the building blocks of the central tubule. This is further supported by the observation that elevated levels of SAS-6 in Drosophila cells resulted in higher order structures resembling central tubule morphology. Finally, in the presence of embryonic extract, SAS-6 tetramers assembled into high density complexes, providing a starting point for the eventual in vitro reconstruction of centrioles.

  4. Évaluer l'impact des stéréotypes dans les supports multimédia Evaluating the impact of stereotypes in multimedia tools

    Directory of Open Access Journals (Sweden)

    Joëlle Aden

    2006-12-01

    Full Text Available La navigation sur Internet offre aux enseignants de langues vivantes un kaléidoscope de supports authentiques variés, qui reflète des points de vues multi perspectivistes sur les réalités socioculturelles des groupes qui utilisent la langue apprise. La navigation est probablement un des usages du multimédia les plus développés dans l'enseignement de masse en langues. Il suffit, pour s'en convaincre, de parcourir les méthodes éditées ces cinq dernières années pour voir que l'outil multimédia est surtout sollicité pour faire des recherches sur des thèmes étudiés en classe et de nombreux travaux ont mis en avant le potentiel de cet outil. Dans les classes, l'idée selon laquelle il est indispensable de laisser les élèves naviguer sans guidage dans l'hypertexte a très vite cédé la place à la nécessité de réduire l'accès aux ressources Internet à l'intérieur de cadres contraints, en général à partir de sites présélectionnés à cet effet en vue de réaliser des tâches dans la langue d'étude. Aujourd'hui, dans la formation en langue des enseignants, deux types de dispositifs Tice (technologies de l'information et de la communication pour l'éducation occupent la première place : les cyberenquêtes (webquests et les échanges par courrier électronique, mais à nouveau, les limites des cyberenquêtes sont perceptibles, elles recréent des contraintes formelles dans lesquelles on force les repérages. Dans cet article, nous nous intéresserons à un dispositif[1] intégrant des activités plus libres de navigation et de choix de supports vidéo que nous avons réintégré dans une démarche culturelle en classe. Nous considérerons la façon dont la variété de ces supports, libres et contraints, influe sur la construction des repères identitaires des élèves. Nous étudierons ce phénomène en lien avec les mécanismes cognitifs et socio discursifs que les apprenants mettent en œuvre lorsqu'ils sont exposés

  5. Folding Landscape of Mutant Huntingtin Exon1: Diffusible Multimers, Oligomers and Fibrils, and No Detectable Monomer.

    Directory of Open Access Journals (Sweden)

    Bankanidhi Sahoo

    Full Text Available Expansion of the polyglutamine (polyQ track of the Huntingtin (HTT protein above 36 is associated with a sharply enhanced risk of Huntington's disease (HD. Although there is general agreement that HTT toxicity resides primarily in N-terminal fragments such as the HTT exon1 protein, there is no consensus on the nature of the physical states of HTT exon1 that are induced by polyQ expansion, nor on which of these states might be responsible for toxicity. One hypothesis is that polyQ expansion induces an alternative, toxic conformation in the HTT exon1 monomer. Alternative hypotheses posit that the toxic species is one of several possible aggregated states. Defining the nature of the toxic species is particularly challenging because of facile interconversion between physical states as well as challenges to identifying these states, especially in vivo. Here we describe the use of fluorescence correlation spectroscopy (FCS to characterize the detailed time and repeat length dependent self-association of HTT exon1-like fragments both with chemically synthesized peptides in vitro and with cell-produced proteins in extracts and in living cells. We find that, in vitro, mutant HTT exon1 peptides engage in polyQ repeat length dependent dimer and tetramer formation, followed by time dependent formation of diffusible spherical and fibrillar oligomers and finally by larger, sedimentable amyloid fibrils. For expanded polyQ HTT exon1 expressed in PC12 cells, monomers are absent, with tetramers being the smallest molecular form detected, followed in the incubation time course by small, diffusible aggregates at 6-9 hours and larger, sedimentable aggregates that begin to build up at 12 hrs. In these cell cultures, significant nuclear DNA damage appears by 6 hours, followed at later times by caspase 3 induction, mitochondrial dysfunction, and cell death. Our data thus defines limits on the sizes and concentrations of different physical states of HTT exon1 along the

  6. Evaluación de la satisfacción del paciente hospitalizado: empleo de una matriz multirrasgo-multimétodo reducida

    OpenAIRE

    Cabrero García, Julio; Richart Martínez, Miguel; Reig Ferrer, Abilio

    1993-01-01

    En esta investigación sobre la satisfacción del paciente con la hospitalización y los cuidados de enfermería se hace uso de la estrategia "matriz multirrasgo-multimétodo". Los sujetos (n=116) fueron personas ingresadas en los hospitales del Servicio Valenciano de Salud de Alicante y Elche. Se midieron dos rasgos: satisfacción con los cuidados de enfermería y satisfacción con la hospitalización. Los métodos fueron: escalas con formato de respuesta "acuerdo-desacuerdo" con clave positiva (AD+),...

  7. MHC multimer-guided and cell culture-independent isolation of functional T cell receptors from single cells facilitates TCR identification for immunotherapy.

    Directory of Open Access Journals (Sweden)

    Georg Dössinger

    Full Text Available Adoptive therapy using T cells redirected to target tumor- or infection-associated antigens is a promising strategy that has curative potential and broad applicability. In order to accelerate the screening process for suitable antigen-specific T cell receptors (TCRs, we developed a new approach circumventing conventional in vitro expansion-based strategies. Direct isolation of paired full-length TCR sequences from non-expanded antigen-specific T cells was achieved by the establishment of a highly sensitive PCR-based T cell receptor single cell analysis method (TCR-SCAN. Using MHC multimer-labeled and single cell-sorted HCMV-specific T cells we demonstrate a high efficacy (approximately 25% and target specificity of TCR-SCAN receptor identification. In combination with MHC-multimer based pre-enrichment steps, we were able to isolate TCRs specific for the oncogenes Her2/neu and WT1 even from very small populations (original precursor frequencies of down to 0.00005% of CD3(+ T cells without any cell culture step involved. Genetic re-expression of isolated receptors demonstrates their functionality and target specificity. We believe that this new strategy of TCR identification may provide broad access to specific TCRs for therapeutically relevant T cell epitopes.

  8. Tutorial multimèdia per a guiar la preparació i defensa del Treball de Fi de Grau

    Directory of Open Access Journals (Sweden)

    Gregorio González Alcaide

    2013-12-01

    Full Text Available La preparació i defensa d’un Treball de Fi de Grau constitueix una de les principals novetats derivades del procés de construcció de l’Espai Europeu d’Educació Superior. En aquest treball queden reflectides totes les habilitats adquirides pels estudiants en els anys previs a la finalització del Grau, ja que els estudiants han d’enfrontar-se en el mateix al procés de generació autònoma de coneixement i a les dificultats del treball pràctic. El present estudi recull l’experiència de desenvolupament d’un tutorial multimèdia per a guiar el procés de realització del Treball de Fi de Grau, adaptats als objectius d’aprenentatge i a l’adquisició de competències dels alumnes destinataris. El treball s’ha desenvolupat en les següents fases: a determinació dels continguts que havien d’esser inclosos en el tutorial i disseny dels objectes d’aprenentatge; b desenvolupament tècnic e implementació dels materials en un tutorial accessible a través de la web; i c avaluació dels materials desenvolupats i dels processos d’aprenentatge. S’han desenvolupat els següents objectes d’aprenentatge: unitats didàctiques que descriuen les característiques, estructura i continguts que s’han d’incloure en cadascuna de les seccions que conformen el Treball de Fi de Grau; llistat de recursos que poden resultar d’interès per a realitzar una aproximació a “l’estat del art” i que poden resultar d’utilitat per a la creació del text escrit (com ara bases de dades i programes gestors de bibliografia; tests per a que els alumnes puguen verificar l’adequació dels textos que han preparat en relació amb la normativa i les característiques dels Treballs de Fi de Grau; i finalment, un video que recrea l’exposició oral i defensa d’un Treball de Fi de Grau. El programa eXeLearning fou utilitzat per al desenvolupament dels materials i del tutorial. Per a l’avaluació dels materials elaborats es combinaren t

  9. Magnetic-Activated Cell Sorting of TCR-engineered T cells using tCD34 as a gene marker, but not peptide-MHC multimers, results in significant numbers of functional CD4 and CD8 T cells

    NARCIS (Netherlands)

    Govers, C.; Berrevoets, C.; Treffers-Westerlaken, E.; Broertjes, M.; Debets, R.

    2012-01-01

    T cell sorting technologies with peptide-MHC multimers or antibodies against gene markers enable enrichment of antigen-specific T cells and are expected to enhance therapeutic efficacy of clinical T cell therapy. However, a direct comparison between sorting reagents for their ability to enrich T cel

  10. Magnetic-activated cell sorting of TCR-engineered T cells, using tCD34 as a gene marker, but not peptide-MHC multimers, results in significant numbers of functional CD4+ and CD8+ T cells

    NARCIS (Netherlands)

    C.C.F.M. Govers (Coen); C.A. Berrevoets (Cor); E. Treffers-Westerlaken (Elike); M. Broertjes (Marieke); J.E.M.A. Debets (Reno)

    2012-01-01

    textabstractT cell-sorting technologies with peptide-MHC multimers or antibodies against gene markers enable enrichment of antigen-specific T cells and are expected to enhance the therapeutic efficacy of clinical T cell therapy. However, a direct comparison between sorting reagents for their ability

  11. Heart failure drug digitoxin induces calcium uptake into cells by forming transmembrane calcium channels

    OpenAIRE

    2008-01-01

    Digitoxin and other cardiac glycosides are important, centuries-old drugs for treating congestive heart failure. However, the mechanism of action of these compounds is still being elucidated. Calcium is known to potentiate the toxicity of these drugs, and we have hypothesized that digitoxin might mediate calcium entry into cells. We report here that digitoxin molecules mediate calcium entry into intact cells. Multimers of digitoxin molecules also are able to form calcium channels in pure plan...

  12. Characterisation of adiponectin multimers and the IGF axis in humans with a heterozygote mutation in the tyrosine kinase domain of the insulin receptor gene

    DEFF Research Database (Denmark)

    Højlund, Kurt; Beck-Nielsen, Henning; Flyvbjerg, Allan

    2012-01-01

    Objective: Low levels of adiponectin, IGF-binding protein (IGFBP)-1, and IGFBP-2, and high levels of leptin correlate with several indices of insulin resistance and risk of type 2 diabetes. However, in insulin receptoropathies plasma adiponectin is paradoxically increased despite severe insulin...... an euglycemic-hyperinsulinemic clamp were examined for plasma adiponectin multimers, leptin, total IGF-I, IGF-II, free IGF-I, IGFBP-1 and IGFBP-2.Results: Despite 10-fold elevated fasting insulin and marked insulin resistance in Arg1174Gln-carriers, the levels of total adiponectin, leptin, IGFBP-1 and IGFBP-2......1174Gln-carriers. Interestingly, exogenous insulin failed to suppress total adiponectin in Arg1174Gln-carriers, but reduced IGFBP-1 and increased IGFBP-2 as in controls.Conclusion: The normal levels of adiponectin, IGFBP-1 and IGFBP-2 in the face of highly elevated insulin levels suggest an impaired...

  13. La eficiencia teórica y metodológica de los diseños multimétodo

    Directory of Open Access Journals (Sweden)

    JOAN M. VERD

    2008-01-01

    Full Text Available En los últimos años, el ya viejo debate en torno a la articulación metodológica se ha centrado con fuerza en las implicaciones de las investigaciones multimétodo o basadas en la mezcla de métodos (métodos mixtos. En este contexto se ha reflexionado con cierta profundidad, especialmente en el ámbito anglosajón, respecto a las ventajas metodológicas que aportan este tipo de diseños, aunque bastante menos respecto a los beneficios que se aportan a la reflexión teórica. Partiendo de la premisa de que este tipo de diseño no debe entenderse como una vía de escape a la realidad multiparadigmática de la investigación sociológica, el artículo defiende que el diseño multimétodo es más eficiente teórica y metodológicamente que los diseños exclusivamente cuantitativos o cualitativos. Utilizando la terminología de Creswell, se argumenta que la eficiencia metodológica se consigue especialmente con los diseños de carácter secuencial, mientras que la eficiencia teórica se consigue especialmente con los diseños de carácter concurrente, sobre todo en su vertiente anidada. Estos argumentos se refuerzan con ejemplos de una investigación que los dos autores han terminado recientemente, centrada en la realidad juvenil catalana.

  14. Usos e apropriações de multimídias na educação para a biodiversidade em escolas de Belém/PA

    Directory of Open Access Journals (Sweden)

    Mayara Santos Maciel

    2016-01-01

    Full Text Available Esta pesquisa, realizada no âmbito do Programa de Capacitação Institucional através do Museu Paraense Emilio Goeldi/MCTI, identificou as percepções sobre o conceito de biodiversidade em duas comunidades escolares de Ensino Fundamental e Médio da cidade de Belém do Pará - Brasil, vinculadas aos sistemas municipal e estadual de ensino, a saber: Fundação Centro de Referência em Educação Ambiental Professor Eidorfe Moreira e Escola Estadual de Ensino Fundamental e Médio Vilhena Alves. Também identificou como as Tecnologias da Informação e da Comunicação e multimídias atuam como mediadoras dos processos de ensino e aprendizado sobre biodiversidade nestas comunidades. Como metodologia foi utilizada a pesquisa-ação com observação participante (PERUZZO, 2003 e entrevistas em profundidade do tipo semi-abertas com questões semi-estruturadas (Duarte, 2009. Concluiu-se que o conceito de biodiversidade deve ser melhor trabalhado em âmbito escolar, de uma forma estruturada e com o auxílio pedagógico das TICs, cujo uso educativo deve ser favorecido com melhores investimentos na educação pública, principalmente na formação e sensibilização de professores para o uso pedagógico das TICs e multimídias.

  15. A separate pool of cardiac phospholemman that does not regulate or associate with the sodium pump: multimers of phospholemman in ventricular muscle.

    Science.gov (United States)

    Wypijewski, Krzysztof J; Howie, Jacqueline; Reilly, Louise; Tulloch, Lindsay B; Aughton, Karen L; McLatchie, Linda M; Shattock, Michael J; Calaghan, Sarah C; Fuller, William

    2013-05-10

    Phospholemman regulates the plasmalemmal sodium pump in excitable tissues. In cardiac muscle, a subpopulation of phospholemman with a unique phosphorylation signature associates with other phospholemman molecules but not with the pump. Phospholemman oligomers exist in cardiac muscle. Much like phospholamban regulation of SERCA, phospholemman exists as both a sodium pump inhibiting monomer and an unassociated oligomer. Phospholemman (PLM), the principal quantitative sarcolemmal substrate for protein kinases A and C in the heart, regulates the cardiac sodium pump. Much like phospholamban, which regulates the related ATPase SERCA, PLM is reported to oligomerize. We investigated subpopulations of PLM in adult rat ventricular myocytes based on phosphorylation status. Co-immunoprecipitation identified two pools of PLM: one not associated with the sodium pump phosphorylated at Ser(63) and one associated with the pump, both phosphorylated at Ser(68) and unphosphorylated. Phosphorylation of PLM at Ser(63) following activation of PKC did not abrogate association of PLM with the pump, so its failure to associate with the pump was not due to phosphorylation at this site. All pools of PLM co-localized to cell surface caveolin-enriched microdomains with sodium pump α subunits, despite the lack of caveolin-binding motif in PLM. Mass spectrometry analysis of phosphospecific immunoprecipitation reactions revealed no unique protein interactions for Ser(63)-phosphorylated PLM, and cross-linking reagents also failed to identify any partner proteins for this pool. In lysates from hearts of heterozygous transgenic animals expressing wild type and unphosphorylatable PLM, Ser(63)-phosphorylated PLM co-immunoprecipitated unphosphorylatable PLM, confirming the existence of PLM multimers. Dephosphorylation of the PLM multimer does not change sodium pump activity. Hence like phospholamban, PLM exists as a pump-inhibiting monomer and an unassociated oligomer. The distribution of different PLM

  16. Data analysis as a source of variability of the HLA-peptide multimer assay: from manual gating to automated recognition of cell clusters.

    Science.gov (United States)

    Gouttefangeas, Cécile; Chan, Cliburn; Attig, Sebastian; Køllgaard, Tania T; Rammensee, Hans-Georg; Stevanović, Stefan; Wernet, Dorothee; thor Straten, Per; Welters, Marij J P; Ottensmeier, Christian; van der Burg, Sjoerd H; Britten, Cedrik M

    2015-05-01

    Multiparameter flow cytometry is an indispensable method for assessing antigen-specific T cells in basic research and cancer immunotherapy. Proficiency panels have shown that cell sample processing, test protocols and data analysis may all contribute to the variability of the results obtained by laboratories performing ex vivo T cell immune monitoring. In particular, analysis currently relies on a manual, step-by-step strategy employing serial gating decisions based on visual inspection of one- or two-dimensional plots. It is therefore operator dependent and subjective. In the context of continuing efforts to support inter-laboratory T cell assay harmonization, the CIMT Immunoguiding Program organized its third proficiency panel dedicated to the detection of antigen-specific CD8(+) T cells by HLA-peptide multimer staining. We first assessed the contribution of manual data analysis to the variability of reported T cell frequencies within a group of laboratories staining and analyzing the same cell samples with their own reagents and protocols. The results show that data analysis is a source of variation in the multimer assay outcome. To evaluate whether an automated analysis approach can reduce variability of proficiency panel data, we used a hierarchical statistical mixture model to identify cell clusters. Challenges for automated analysis were the need to process non-standardized data sets from multiple centers, and the fact that the antigen-specific cell frequencies were very low in most samples. We show that this automated method can circumvent difficulties inherent to manual gating strategies and is broadly applicable for experiments performed with heterogeneous protocols and reagents.

  17. Desenvolvimento de um Sistema Multimídia Educacional sobre a Paleontologia da Bacia de Pirabas, Mioceno do Norte do Brasil.

    Directory of Open Access Journals (Sweden)

    Márcia Aparecida Fernandes dos Reis

    2007-07-01

    Full Text Available O conhecimento paleontológico é umaferramenta importante para a compreensão dabiologia e das geociências, por isso, a divulgaçãodesta ciência necessita ser ampliada, em especialno ensino fundamental e no ensino médio. Afalta de recursos didáticos que estimulem ointeresse dos alunos no ensino de paleontologiaé uma das principais dificuldades no processo deensino-aprendizagem nesta disciplina. Um outroproblema observado é a falta de conhecimento e/ou atualização dos professores nesta área. Com oobjetivo de fornecer uma estratégia didática para oconhecimento e a divulgação da paleontologia noensino fundamental e médio, foi elaborado um CDROMsobre a Bacia de Pirabas, localizada no Estadodo Pará, Norte do Brasil. Este trabalho faz parte deum projeto maior que visa o desenvolvimento deum sistema multimídia educacional relacionado àpaleontologia e às principais bacias sedimentaresbrasileiras. O software desenvolvido fornece aosalunos e professores de ensino fundamental e médiouma ferramenta dinâmica e interativa que auxilia oprocesso ensino-aprendizagem em paleontologia,permitindo a divulgação científica e cultural dos sítiosfossilíferos destacando a importância da preservaçãodestes locais. O Sistema Multimídia utilizado paraeste trabalho foi desenvolvido no software de autoriaDirector 8.5 em conjunto com o software de apoiopara manipulação de imagens, textos e sons e parao cenário paleoambiental foi utilizado o programa“Vue 5 Infinite versão 2004”. O sistema multimídiaapresenta um histórico da Bacia de Pirabas, suaimportância, além da reconstituição paleoambientale dos seguintes conteúdos: micropalentologia,paleobotânica, paleontologia de invertebrados epaleontologia de vertebrados. Em relação à geologiaforam destacados os conteúdos: localização,extensão, origem e evolução, idade e estratigrafiada bacia. Todo o conteúdo foi baseado em livros,revistas, sites e trabalhos publicados em peri

  18. Um caso multimédia na formação inicial: contributos para o conhecimento sobre o ensino exploratório da Matemática

    OpenAIRE

    Canavarro, Ana Paula

    2013-01-01

    Este artigo tem como foco o uso de casos multimédia na formação inicial de professores e procura analisar o seu contributo para o desenvolvimento do conhecimento didático de futuras professoras acerca do ensino exploratório da Matemática, bem como apreciar as suas perspetivas sobre as mais-valias do caso multimédia utilizado como recurso formativo. Analisam-se questionários e relatórios de treze alunas do Mestrado em Educação Pré-Escolar e Ensino do 1.º Ciclo da Universidade de Évora, que tra...

  19. OCR-MAC:一种新的基于CSMA的无线传感器网络MAC协议%OCR-MAC:A new CSMA-based MAC protocol for WSN

    Institute of Scientific and Technical Information of China (English)

    李朋举

    2014-01-01

    传感器网络被认为是21世纪最重要的技术之一,它将对人类未来的生活产生深远影响,其中MAC协议是WSN通信协议中最为突出也是最为重要的关键协议之一。无线传感器网络具有节点的电源能量和硬件资源受限的特点,因此设计高能效的MAC协议是MAC协议研究中具有挑战性的研究课题。基于以上目的,本文采用了CSMA机制和分簇路由协议的优点,改进了传统的MAC协议提出了OCR-MAC协议,并利用MATLAB进行了仿真,仿真结果表明,改进后的OCR-MAC协议在节能和网络数据传输方面性能更加优越。%Sensor network is considered to be one of the most important technology in the 21st century, it will have a profound impact human life in the future, and the MAC protocols are the most prominent and important key agreements in the WSN communication protocols. WSN has the characteristics of limited nodes power and hardware resources, therefore designing an energy-efficient MAC protocol is a challenging research topic in the MAC protocols’ study. Based on the above purpose, this paper adopts the advantages of CSMA mechanism and clustering routing protocols, improves the traditional MAC protocol and proposes the OCR-MAC protocol, simulations by MATLAB show that the improved OCR-MAC protocols is more superior in terms of energy saving and network data transmission.

  20. Confusão do Consumidor no Cenário Multimídia e Multicanal: Definição do Construto e Agenda de Pesquisa

    Directory of Open Access Journals (Sweden)

    Patricia Liebesny Broilo

    2016-03-01

    Full Text Available A crescente oferta de escolha no universo de consumo pode implicar em confusão do consumidor. Frente à falta de uma definição consolidada desse construto, investigou-se a compreensão e conhecimentos acumulados sobre o fenômeno. Utilizou-se o método de teoria fundamentada aplicado a uma revisão sistematizada da literatura, em seleção de 93 artigos publicados na última década. Como resultado, foram identificadas seis compreensões distintas e achados empíricos associados a cada uma delas. Concluiu-se existir uma tendência de compreensão abrangente à trajetória de consumo como um todo, faltando, porém, maior enfoque na confusão relacionada à conectividade do consumidor no cenário multimídia e multicanal. O presente artigo propõe, portanto, uma nova definição do construto e questões a serem exploradas em estudos futuros.

  1. Painel de especialistas e estratégia multimétodos: reflexões, exemplos, perspectivas = Expert panel and multimethods strategy: reflections, examples and perspectives

    Directory of Open Access Journals (Sweden)

    Pinheiro, José Q. (Queiroz

    2013-01-01

    Full Text Available Utilizamos a expressão painel de especialistas para identificar uma técnica de pesquisa empregada em psicologia, administração e ciências sociais em geral. Mostramos sua utilização tradicional em pesquisa, contextos científicos em que tem sido empregada, enfatizando sua aplicação em pesquisas que adotem a estratégia multimétodos, seja na modalidade de técnicas concomitantes ou sequenciais. Para maior clareza, acrescentamos dois exemplos extraídos de nossos estudos na área das relações pessoa-ambiente. O sentido clássico do termo é redefinido para o contexto desta apresentação, na medida em que apresentamos o painel de especialistas como uma das técnicas de coleta de dados propriamente dita, assegurando maior fidedignidade na representação do fenômeno investigado e redução do viés metodológico

  2. Expression, purification, and characterization of protective MPT64 antigen protein and identification of its multimers isolated from nontoxic Mycobacterium tuberculosis H37Ra.

    Science.gov (United States)

    Chu, Teng-Ping J; Yuann, Jeu-Ming P

    2011-05-01

    MPT64, a secreted protein of Mycobacterium tuberculosis (MTB), stimulates the immune reactions within cells and is a protective antigen that is lost by the bacilli Calmette-Guérin (BCG) vaccine during propagation. To minimize the toxicity caused by MTB, we used the MPT64 gene encoded by nontoxic H37Ra MTB to carry out genetic expansion via polymerase chain reaction and gene clone MPT64. The plasmid DNA encoded MPT64 was expressed at 20°C for 22 H, and a large quantity of MPT64 was obtained. In the absence of urea, MPT64 multimers with subunits being covalently connected via disulfide bonds were detected by Western blot showing strong protein-protein interactions, as evidenced by the formation of MPT64 tetramers. Finally, with urea of decreasing concentrations, we refolded MPT64 purified in the presence of urea and determined its secondary structures using circular dichroism. MPT64 was found to contain 2.2% α-helix, 50.9% β-sheet, 19.5% turn, and 27.4% random coil. The molecular weight of MPT64 was determined by a matrix-assisted laser desorption ionization-time of flight mass spectrometer and found to be 23,497 Da, very close to the theoretical molecular weight of MPT64. The results presented here provide a sound basis for future biochemical and biophysical studies of MPT64 or any other proteins encoded by nontoxic H37Ra MTB. Copyright © 2011 International Union of Biochemistry and Molecular Biology, Inc.

  3. The vitamin K oxidoreductase is a multimer that efficiently reduces vitamin K epoxide to hydroquinone to allow vitamin K-dependent protein carboxylation.

    Science.gov (United States)

    Rishavy, Mark A; Hallgren, Kevin W; Wilson, Lee A; Usubalieva, Aisulu; Runge, Kurt W; Berkner, Kathleen L

    2013-11-01

    The vitamin K oxidoreductase (VKORC1) recycles vitamin K to support the activation of vitamin K-dependent (VKD) proteins, which have diverse functions that include hemostasis and calcification. VKD proteins are activated by Glu carboxylation, which depends upon the oxygenation of vitamin K hydroquinone (KH2). The vitamin K epoxide (KO) product is recycled by two reactions, i.e. KO reduction to vitamin K quinone (K) and then to KH2, and recent studies have called into question whether VKORC1 reduces K to KH2. Analysis in insect cells lacking endogenous carboxylation components showed that r-VKORC1 reduces KO to efficiently drive carboxylation, indicating KH2 production. Direct detection of the vitamin K reaction products is confounded by KH2 oxidation, and we therefore developed a new assay that stabilized KH2 and allowed quantitation. Purified VKORC1 analyzed in this assay showed efficient KO to KH2 reduction. Studies in 293 cells expressing tagged r-VKORC1 revealed that VKORC1 is a multimer, most likely a dimer. A monomer can only perform one reaction, and a dimer is therefore interesting in explaining how VKORC1 accomplishes both reactions. An inactive mutant (VKORC1(C132A/C135A)) was dominant negative in heterodimers with wild type VKORC1, resulting in decreased KO reduction in cells and carboxylation in vitro. The results are significant regarding human VKORC1 mutations, as warfarin-resistant patients have mutant and wild type VKORC1 alleles. A VKORC1 dimer indicates a mixed population of homodimers and heterodimers that may have different functional properties, and VKORC1 reduction may therefore be more complex in these patients than appreciated previously.

  4. Magnetic-activated cell sorting of TCR-engineered T cells, using tCD34 as a gene marker, but not peptide-MHC multimers, results in significant numbers of functional CD4+ and CD8+ T cells.

    Science.gov (United States)

    Govers, Coen; Berrevoets, Cor; Treffers-Westerlaken, Elike; Broertjes, Marieke; Debets, Reno

    2012-06-01

    T cell-sorting technologies with peptide-MHC multimers or antibodies against gene markers enable enrichment of antigen-specific T cells and are expected to enhance the therapeutic efficacy of clinical T cell therapy. However, a direct comparison between sorting reagents for their ability to enrich T cells is lacking. Here, we compared the in vitro properties of primary human T cells gene-engineered with gp100(280-288)/HLA-A2-specific T cell receptor-αβ (TCRαβ) on magnetic-activated cell sorting (MACS) with various peptide-MHC multimers or an antibody against truncated CD34 (tCD34). With respect to peptide-MHC multimers, we observed that Streptamer(®), when compared with pentamers and tetramers, improved T cell yield as well as level and stability of enrichment, of TCR-engineered T cells (>65% of peptide-MHC-binding T cells, stable for at least 6 weeks). In agreement with these findings, Streptamer, the only detachable reagent, revealed significant T cell expansion in the first week after MACS. Sorting TCR and tCD34 gene-engineered T cells with CD34 monoclonal antibody (mAb) resulted in the most significant T cell yield and enrichment of T cells (>95% of tCD34 T cells, stable for at least 6 weeks). Notably, T cells sorted with CD34 mAb, when compared with Streptamer, bound about 2- to 3-fold less peptide-MHC but showed superior antigen-specific upregulated expression of CD107a and production of interferon (IFN)-γ. Multiparametric flow cytometry revealed that CD4(+) T cells, uniquely present in CD34 mAb-sorted T cells, contributed to enhanced IFN-γ production. Taken together, we postulate that CD34 mAb-based sorting of gene-marked T cells has benefits toward applications of T cell therapy, especially those that require CD4(+) T cells.

  5. Teaching Form as Form

    DEFF Research Database (Denmark)

    Keiding, Tina Bering

    2012-01-01

    understanding of form per se, or, to use an expression from this text, of form as form. This challenge can be reduced to one question: how can design teaching support students in achieving not only the ability to recognize and describe different form-related concepts in existing design (i.e. analytical...... means that form serves both as the connective value and as the concept for reflection. In other words, form is observed as form, not anything else. The didactical challenge of teaching form as form is accentuated by students’ everyday-based pre-orientation towards function at the expense of form....... In general, students enter design education as far more skilled observers with regards to function than form. They are, in other words, predisposed to observe objects asking ‘what is?’, rather than ‘how is?’. This habit has not only cognitive implications. It is closely intertwined with a rudimentary...

  6. Teaching Form as Form

    DEFF Research Database (Denmark)

    Keiding, Tina Bering

    2012-01-01

    understanding of form per se, or, to use an expression from this text, of form as form. This challenge can be reduced to one question: how can design teaching support students in achieving not only the ability to recognize and describe different form-related concepts in existing design (i.e. analytical...... means that form serves both as the connective value and as the concept for reflection. In other words, form is observed as form, not anything else. The didactical challenge of teaching form as form is accentuated by students’ everyday-based pre-orientation towards function at the expense of form...... vocabulary of form. Even in cases in which teaching uses terms and phrases from everyday life (for instance, ‘intersection’), the meaning of the word cannot necessarily be transmitted directly from an ordinary vocabulary into a design context. And it is clearly a common issue for the contributions...

  7. Consumo sostenible en organizaciones: enfoques multimétodo para estudiar la conducta proambiental en lugares de trabajo = Consumo sustentável nas organizações: abordagens multimétodo de estudo do comportamento pró-ambiental no local de trabalho = Sustainable consumption in organizations: multi-method approaches to the study of pro-environmental behavior in the workplace

    Directory of Open Access Journals (Sweden)

    Garcia-Mira, Ricardo

    2014-01-01

    Full Text Available Este artigo tem como objetivo apresentar brevemente o projeto LOCAW (Low Carbon at Work, um projecto financiado pelo 7º Programa Cadro da União Europeia que visa promover a compreensão das barreiras e melhorar estilos de vida sustentáveis através da investigação sobre os determinantes do comportamento nas práticas cotidianas e no local de trabalho. Este projecto centra-se em seis grandes organizações que ocupam diferentes posições no debate sobre a abordagem da sustentabilidade. Um enfoque multimétodo é apresentado, com ênfase especial sobre o uso de cenários de back-casting como metodologia inovadora que pode ajudar a projetar padrões sustentáveis de mudança nas organizações. Finalmente, este trabalho apresenta os resultados preliminares da primeira parte do projeto, que incide sobre o diagnóstico das práticas cotidianas no ambiente de trabalho. Tanto a metodologia de cenários de back-casting e os resultados preliminares serão apresentados exclusivamente relacionados com o estudo de caso espanhol, ou seja, uma universidade

  8. Evaluation of a multimedia online tool for teaching bronchial hygiene to physical therapy students Avaliação de um recurso multimídia para ensino de higiene brônquica para estudantes de fisioterapia

    Directory of Open Access Journals (Sweden)

    Cibele C. B. Marques da Silva

    2012-02-01

    Full Text Available BACKGROUND: Advances in information technology have been widely used in teaching health care professionals. The use of multimedia resources may be important for clinical learning and we are not aware of previous reports using such technology in respiratory physical therapy education. Objectives: Our approach was to evaluate a conventional bronchial hygiene techniques (BHTs course with an interactive online environment, including multimedia resources. METHODS: Previous developed audiovisual support material comprised: physiology, physiopathology and BHTs, accessible to students through the Internet in conjunction with BHTs classes. Two groups of students were compared and both attended regular classes: the on-line group (n=8 received access to online resources, while the control group (n=8 received conventional written material. Student's performance was evaluated before and after the course. RESULTS: A preliminary test (score 0 to 10 was applied before the beginning of the course, showing that the initial knowledge of both groups was comparable [online, 6.75 (SD=0.88 vs. control, 6.125 (SD=1.35; p>0.05]. Two weeks after the end of the course, a second test showed that the online group performed significantly better than the control group [respectively, 7.75 (SD=1.28 vs. 5.93 (SD=0.72; p>0.05]. CONCLUSIONS: The use of a multimedia online resource had a positive impact on student's learning in respiratory therapy field in which instrumental and manual resources are often used and can be explored using this technology.CONTEXTUALIZAÇÃO: As novas tecnologias da informação têm sido amplamente utilizadas no ensino em saúde. O uso de recursos multimídia pode ser importante para o aprendizado clínico, no entanto não há descrição na literatura da aplicação e relevância desses recursos para o ensino de fisioterapia respiratória. OBJETIVOS: Avaliar o impacto de um recurso didático multimídia no ensino de manobras de higiene brônquica (MHB

  9. Analyse d’applications multimédias pour un usage pédagogique. À la recherche de l’intentionnalité partagée Analyse d’applications multimédias pour un usage pédagogique. À la recherche de l’intentionnalité partagée

    Directory of Open Access Journals (Sweden)

    Didier Paquelin

    2002-03-01

    Full Text Available Développer des usages pédagogiques d’applications multimédias interactives nécessite que l’on s’approprie ces objets technologiques conçus par d’autres. Ressources pédagogiques porteuses d’intentionnalité d’apprentissage, elles requièrent de nouveaux modes d’approche, de lecture, d’appropriation. Là où les repères habituels du livre, du manuel, du vidéogramme ne suffisent plus à établir un choix, l’enseignant, le formateur est amené à se construire un nouveau cadre de référence pour interpréter ces oeuvres. Cet article propose une démarche d’analyse structuraliste et intentionnelle, qui vise à identifier et comprendre l’activité d’apprentissage proposée par le ou les concepteurs.Pedagogical uses of interactive multimedia applications cannot be developed as long as we have not managed to make ours such technological objects designed by others. They are pedagogical resources that carry an intention to trigger learning and request new ways of approaching, reading and mastering the material. Teachers and trainers are led to build new reference frameworks up in order to make sense of them. The markers they are used to with books or video works turn out to be inadequate and cannot be relied upon when selecting materials. The article suggests a structuralist and intentional analytical process that aims at identifying and understanding the learning activity the designers put forward.

  10. Produção de multimídia e acessibilidade em cursos de aprendizagem a distância/Multimedia production and accessibility on distance learning courses

    Directory of Open Access Journals (Sweden)

    Joni A. Amorim

    2009-06-01

    Full Text Available Estudantes online que são surdos podem encontrar diferentes barreiras em cursos baseados na Web incluindo falta de imagens relacionadas ao conteúdo em páginas tomadas por texto. As diferentes barreiras podem diminuir a compreensão para pessoas cuja primeira língua seja a linguagem de sinais ao invés da linguagem escrita, um desafio para pesquisadores e professores interessados em desenvolver conteúdo multimídia. A combinação de texto, imagem, áudio e vídeo foi potencializada devido à convergência digital e passa a caracterizar os textos virtuais. O uso de multimídia agora permite diferentes efeitos na elaboração de significados. Nesta perspectiva de mudanças constantes, este artigo busca discutir alguns dos muitos desafios para o oferecimento de Cursos de Graduação em larga escala, apresentando algumas das características dos Cursos de Graduação em Letras-Libras. Também se discute a acessibilidade de conteúdo educacional digital multimídia no contexto de um projeto em andamento na UNICAMP.Online students who are deaf may encounter different barriers on Web based courses including lack of content-related images in pages full of text. The different barriers can slow comprehension for people whose first language may be a sign language instead of a written language, a challenge for researchers and teachers interested in developing multimedia content. The intermix of text, image, audio, and video has been increased due to the digital convergence and characterize the virtual texts. Multimedia usage now brings different effects on meaning making. In this perspective, this paper intends to discuss some of the many challenges in the offer of large scale undergraduate courses presenting some characteristics of a course on the Brazilian Sign Language. The paper discusses educational digital multimedia content accessibility in the context of an ongoing project at UNICAMP.

  11. "Amor e sexo: mitos, verdades e fantasias": jovens avaliam potencial de material multimídia educativo em saúde "Love and sex: myths, truths and fantasies": youth evaluation of the multimedia resource as educational health material

    Directory of Open Access Journals (Sweden)

    Sonia Maria Figueira Mano

    2009-01-01

    Full Text Available A educação sexual na escola é prática defendida e prescrita pelo Ministério da Educação nos Parâmetros Curriculares Nacionais como eixo transversal ao currículo. O tema é complexo e a proposta expressa demandas específicas, como a formação dos professores e materiais educativos adequados. O Museu da Vida, COC/Fiocruz, desenvolveu o multimídia «Amor e sexo: mitos, verdades e fantasias» e, neste artigo, apresenta a avaliação efetuada por 36 alunos do Ensino Médio de escolas públicas do Rio de Janeiro sobre o produto. A avaliação permitiu identificar o multimídia como recurso educativo capaz de promover o tema sexualidade em situações de aprendizagem. Um recurso do multimídia, denominado Caderno de Perguntas, mostrou-se como espaço de interlocução entre os jovens, permitindo troca anônima de dúvidas e ideias, e alimentando um banco de dados que permite aos professores e pesquisadores conhecerem melhor o pensamento dos adolescentes.Sex education in schools is advised and agreed as a universal theme in the National Curriculum of the Brazilian Education Ministry. This subject is complex and the proposal expresses specific needs, such as teacher training and the support of educational materials. The Museum of Life, COC/Fiocruz, developed the multimedia resource, "Love and Sex: myths, truths and fantasies" and this study presents the results of the evaluation made by 36 high school students from public schools, in Rio de Janeiro about the multimedia resource. The evaluation identified it as an educational resource, able to promote dialogue and support the the theme sexuality in teaching situations. A multimedia resource, called Answers Notebook, gives a dialogue space between adolescents, allowing anonymity in the exchange of doubts and ideas, and feeding into a database that allow teachers and professionals to know better how adolescents think.

  12. Representação da Estruturação de Segmentos de Objetos de Aprendizagem Multimídia: Uma Abordagem Baseada em Meta-modelos de Conteúdo

    Directory of Open Access Journals (Sweden)

    Edmar Welington Oliveira

    2009-06-01

    Full Text Available No contexto de e-learning, o desenvolvimento de materiais de aprendizagem, principalmente os que incorporam multimídia, é visto como um processo caro e demorado. Assim, há um enfoque na reutilização, que é obtida através da abordagem de orientação a objetos, resultando nos Objetos de Aprendizagem (OAs. Entretanto, atualmente, OAs são estruturados como arquivos multimídia e, portanto, seu reuso se dá como um todo, limitando seu aproveitamento e o retorno de investimento sobre seu desenvolvimento. Por outro lado, observa-se que vários OAs multimídia já foram desenvolvidos e um esforço em refazê-los seria inviável. Além disso, OAs são agrupados no intuito de formar aulas e/ou cursos e a semântica aplicada a este agrupamento, bem como a semântica aplicada na construção dos próprios OAs se perde, dificultando o compartilhamento de materiais instrucionais entre diferentes desenvolvedores de conteúdo, grupos de pesquisa ou instituições. Neste sentido, o trabalho apresentado neste artigo propõe uma representação da estrutura de segmentação do conteúdo presente nos OAs existentes. De modo a permitir o compartilhamento destes OAs e o reuso dos segmentos segundo a estruturação de seu conteúdo, meta-modelos de conteúdos guiam a segmentação e são representados em OWL, a linguagem para ontologias definida como padrão pelo W3C. Entretanto, como diferentes meta-modelos podem ser definidos por diferentes grupos de usuário, mapeamentos entre os próprios meta-modelos e entre conteúdos e outros meta-modelos devem ser considerados. A arquitetura de representação desta segmentação de OAs baseada em meta-modelos de conteúdo é apresentada neste artigo e um protótipo e um estudo de caso apresentam a funcionalidade da arquitetura proposta.

  13. "Amor e sexo: mitos, verdades e fantasias": jovens avaliam potencial de material multimídia educativo em saúde "Love and sex: myths, truths and fantasies": youth evaluation of the multimedia resource as educational health material

    OpenAIRE

    Sonia Maria Figueira Mano; Fabio Castro Gouveia; Virgínia Torres Schall

    2009-01-01

    A educação sexual na escola é prática defendida e prescrita pelo Ministério da Educação nos Parâmetros Curriculares Nacionais como eixo transversal ao currículo. O tema é complexo e a proposta expressa demandas específicas, como a formação dos professores e materiais educativos adequados. O Museu da Vida, COC/Fiocruz, desenvolveu o multimídia «Amor e sexo: mitos, verdades e fantasias» e, neste artigo, apresenta a avaliação efetuada por 36 alunos do Ensino Médio de escolas públicas do Rio de J...

  14. Collaborative form(s)

    DEFF Research Database (Denmark)

    Gunn, Wendy

    Gunn asks us to consider beauty as collaborative forms of action generated by moving between design by means of anthropology and anthropology by means of design. Specifically, she gives focus to play-like reflexions on practices of designing energy products, systems and infrastructure. Design...

  15. 两种异构CSMA/CA机制OSTS/BSTS无线传感网络公平性、实时性分析比较%Comparisons of fairness and delay for OSTS/BSTS schemes based heterogeneous CSMA/CA scheme

    Institute of Scientific and Technical Information of China (English)

    吕春峰; 朱建平

    2012-01-01

    Analyses of IEEE 802.15.4 Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) scheme have received considerable attention recently. In this paper, we propose two new CSMA/CA schemes OSTS/BSTS to analyze and improve the performance of CSMA/CA scheme with heterogeneous buffered traffic. We adopt two modified semi-Markov chains with one macro-Markov chain and the theory of queues to derive throughput, transmission probability and delay of unsaturated, unacknowledged 802.15A beacon enabled networks, including the impact of different parameters such as packet arrival rate, packet size, node's buffer size and the number of different kinds of nodes. Nodes of OSTS/BSTS schemes are bestowed over the fair opportunity to access the channel, without any priority. Comprehensive analyses and comparisons between these two schemes are proposed in the paper, and the simulation results are consistent with the predictions of these models.%IEEE802.15.4作为一种专为低速率无线个人区域网络(WPAN)而设计的低成本、低功耗、低速率的短距离无线通信新标准,为无线传感器网络提供了一种很好的解决方案。本文针对异构、非饱和无线网络,提出了两种新的CS—MA/CA机制:OSTS/BSTS机制;异构节点数据到达率不同,其各自获取的吞吐量不同,由此分析获得异构网络节点的公平性。OSTS/BSTS机制最大的特点是异构节点被赋予了公平的机会来访问信道,不存在优先权等级的问题。这两种机制采用两个半马尔可夫链模型来分别表达两组节点的访问过程.一个宏观马尔可夫链模型来表达信道状态转换过程.结合队列理论模型来分析异构节点的延时量、吞吐量、传输概率等特性,以获取网络实时性、公平性理论模型,并采用NS-2仿真工具对分析结果进行了仿真。

  16. Desenvolvimento de um recurso didático multimídia para o ensino de higiene brônquica Development of a multimedia tool for teaching bronchial hygiene

    Directory of Open Access Journals (Sweden)

    Cibele Cristine Berto Marques da Silva

    2009-03-01

    Full Text Available As novas tecnologias da informação têm sido amplamente utilizadas no ensino em saúde. No entanto, não há descrição na literatura do desenvolvimento de recurso multimídia para o ensino de fisioterapia respiratória. O objetivo deste trabalho foi desenvolver material didático multimídia para o ensino de manobras de higiene brônquica (MHB disponibilizado na internet. O material elaborado foi dividido em três módulos: Princípios fisiológicos, Fisiopatologia e MHB. O material foi disponibilizado em diversos formatos (páginas on-line, apostila e recursos audiovisuais e inserido no sítio da internet Ambiente Colaborativo de Aprendizagem. A página on-line de introdução contém links para acesso aleatório aos módulos e um link para acesso à apostila. No módulo Princípios fisiológicos há links para informações sobre o aparelho mucociliar, produção do muco e fatores prejudiciais à defesa pulmonar. No módulo Fisiopatologia há links para informações sobre as principais doenças ou condições causadoras de hipersecreção pulmonar. No módulo MHB há links para informações sobre as manobras e para vídeos. Este recurso didático multimídia para o ensino de MHB, disponibilizado na internet, pode facilitar o aprendizado em fisioterapia respiratória. Entretanto, há necessidade de se avaliar sua efetividade.Advances in information technology have been widely used in teaching health care providers. However, no reports were found on its use in the instruction on respiratory therapy. The purpose here was to develop audiovisual supporting material for teaching bronchial hygiene techniques (BHT available through the internet. The material was organized into three modules: Physiological principles, Physiopathology, and BHT. Each module is available in several formats (online page, booklet and audiovisual resources and is inserted in a collaborative learning environment at the internet. The opening online page has links for

  17. Les outils multimédia d’aide à l’apprentissage des langues : de l’évaluation à la réflexion prospective Multimedia aid tools for language learning: from evaluation to a prospective reflection

    Directory of Open Access Journals (Sweden)

    Christine Rodrigues

    2000-06-01

    Full Text Available En partant de la conception d´un logiciel multimédia, CAMILLE Travailler en France, et de résultats d´expérimentation, nous avons amorcé une réflexion prospective sur ce que pourrait être un logiciel d´aide à l´apprentissage des langues répondant vraiment aux besoins des utilisateurs. Ayant pointé certains dysfonctionnements, nous nous sommes interrogées sur leurs causes et avons tenté de poser les bonnes questions, avant de nous aventurer vers de nouvelles créations. Un des pré-requis de départ est le suivant : dans la mesure où les TIC (Technologies de l´Information et de la Communication ne peuvent certainement pas réussir partout, dans quel domaine leur apport peut-il être bénéfique, voire irremplaçable ? Dans un premier temps, nous présenterons le fonctionnement de CAMILLE et nous décrirons brièvement la méthodologie d´évaluation adoptée. Nous verrons ensuite à quelles questions précises l´expérimentation a cherché à répondre. En nous basant sur les gains effectifs des apprenants, nous chercherons à comprendre si le logiciel les a fait progresser dans la connaissance générale de la langue, en particulier en compréhension orale et écrite. Nous conclurons sur la détermination de quelques éléments à prendre en compte lors de la conception de nouveaux outils multimédia d´aide à l´apprentissage.In this article, we present the results of the evaluation of a multimedia software CAMILLE Travailler en France that we had designed. We then started a prospective reflection on what could be supportive multimedia language learning environments really meeting learners´ needs. As the experimentation revealed certain lacks in the environment, we tried to find out their causes before going further in the design process. We started from the following statement: since Information and Communication Technologies (ICT cannot succeed everywhere in which area can they be useful or even irreplaceable? We will

  18. Aplicación del algoritmo de optimización metaheurístico BOA en el diseño de PSSs robustos para sistemas de potencia multimáquina.

    Directory of Open Access Journals (Sweden)

    Miguel Ramírez

    2016-01-01

    Full Text Available Se presenta la aplicación del algoritmo de optimización BO A (de las siglas en inglés para Bat Optimization Algorithm en el diseño robusto de estabilizadores de sistemas de potencia (PSSs por sus siglas en inglés en sistemas multimáquina. Con el fin de amortiguar las oscila ciones electromecánicas del sistema, la sintonización de parámetros de los PSSs involucrados se efectúa de manera coordinada mediante la alternativa de optimización propuesta y la min imización de una función objetivo calculada directamente de simulaciones en el dominio del tiempo. La efectividad y robustez de los PSSs propuestos (BOAPSSs es investigada a través de la simulación del sistema de estudio bajo diferentes condiciones de operación y perturba ciones. El desempeño de los BOAPSSs es comparado tanto con la respuesta de PSSs diseña dos conve ncionalmente como con el comportamiento proporcionado por PSSs basados en algoritmos genéticos y en optimización de enjambres de partículas. Los resultados obtenidos de este estudio muestran un desempeño notablemente supe rior de los PSSs propuestos con res pecto a los PSSs diseñados convencionalmente. Así mismo y en comparación con PSSs basados tanto en algoritmos genéticos como en inteligencia de enjambres, se verifica la mej ora en el comportamiento dinámico del sistema al utilizar los PSSs diseñados con la metodol ogía propuesta.

  19. Teoría de la carga cognitiva, diseño multimedia y aprendizaje: un estado del arte (Cognitive Load Theory, Design and Multimedia Learning: A State of the Art (Théorie de la charge cognitive, dessin multimédia et apprentissage: un état de l′art (Teoria da carga cognitiva, desenho multimídia e aprendizagem: um estado da arte

    Directory of Open Access Journals (Sweden)

    Luis Alejandro Andrade Lotero

    2012-12-01

    Full Text Available ResumenEn este artículo de revisión se presenta un resumen de la Teoría de la Carga Cognitiva y la Teoría Cognitiva del Aprendizaje Multimedia. Se dan algunos ejem- plos de investigaciones empíricas y se reflexiona acerca del valor explicativo de estas teorías del aprendizaje. Se exponen diez principios para el diseño de material instruccional. No obstante, otras investigaciones han encontrado limitaciones en el uso y práctica de estas teorías. Se refieren principalmente a la medición de la carga cognitiva, a la experiencia, al conocimiento previo de los aprendices y a la motivación y aspectos afectivos que intervienen en el proceso de aprendizaje.AbstractIn this review article is a summary of the Cognitive Load Theory and Cognitive Theory of Multimedia Lear- ning. Some examples of empirical research and considerations on the explanatory value of these learning theories are given, and ten principles for designing instructional material are shown. However, other research has found limitations in the use and practice of these theories. They mainly concern the measurement of cognitive load, experience and prior knowledge of the learners, as well as motivation and emotional aspects in- volved in the learning process.RésuméDans cet article de révision on pré- sente un résumé de la théorie de la charge cognitive et la théorie cogniti- ve de l'apprentissage multimédia. On fournit des exemples de recherches empiriques et on fait une réflexion par rapport à l'importance explica- tive de ces théories d’apprentissage. On présente dix principes pour le dessin du matériel d'instruction. Mal- gré les recherches qu'ont trouvé des limitations dans l'usage et la pratique de ces théories. Elles font référence, notamment à la mesure de la charge cognitive, à l'expérience et la con- naissance préalable des apprentis et aussi à la motivation et aux aspects affectifs qui intervient dans le pro- cessus de l

  20. Triangulação metodológica e abordagem multimétodo na pesquisa sociológica: vantagens e desafios

    Directory of Open Access Journals (Sweden)

    Fabiana Luci de Oliveira

    2015-01-01

    Full Text Available This paper theme is the combination of quantitative and qualitative methods in sociological research, and in social sciences, in general, from the perspective of the multi-method approach – also designated as methodological triangulation. The argument presented here is that a multi-method approach is one of the most complete forms of empirical research, once it combines the strength of large samples, and their ability to generalize, with the strength of case studies, and its ability to identify causal mechanisms. However, it presents many challenges in its implementation, especially when its goal is corroboration. From a review of the reference literature, I will indicate how these challenges can be overcome. I begin by specifying the characteristics of quantitative and qualitative methods, and of their combination (multi-method approach, pointing to the potentials and limitations in this combination, and I conclude describing two studies as examples: a classic research for excellence (Distinction: A social critique of the judgment of taste, in which Bourdieu (1977b used a combination of methods to verify the determinants of cultural practices, and a more recent study (Corruption and inequality at the crossroad – a Multimethod Study of Bribery and Discrimination in Latin America, in which Fried et al. (2010 discuss the relationship between corruption and social inequality in Latin America, from an experiment followed by qualitative interviews as a way to better understand and explain the results of the experimental phase.

  1. Modelo computacional para o gerenciamento de dados e exames de pacientes para o acompanhamento remoto por meio de conferência multimídia Computational model for data and patients' exams management for remote follow-up by multimedia conferences

    Directory of Open Access Journals (Sweden)

    Huei Diana Lee

    2010-12-01

    Full Text Available OBJETIVO: Desenvolver um modelo computacional para aquisição, gerenciamento e armazenamento de dados e exames de pacientes, e definir uma arquitetura de conferência multimídia para o acompanhamento remoto de exames. MATERIAIS E MÉTODOS: Definiu-se uma arquitetura computacional para a aquisição de exames a partir de equipamentos hospitalares, e para o armazenamento e gerenciamento de dados e exames de pacientes foram utilizados o servidor de aplicações Jboss, o sistema gerenciador de banco de dados MySQL, o servidor de páginas Apache e o framework Jboss-Seam para o desenvolvimento de aplicações. Para a conferência multimídia, foi aplicado um estudo de caso utilizando a arquitetura Openmeetings. RESULTADOS: Foram definidos modelos computacionais para o gerenciamento consistente e seguro de dados e exames de pacientes e estudou-se uma arquitetura para conferência multimídia. CONCLUSÃO: Os modelos computacionais, o protótipo implementado e a arquitetura de conferência multimídia avaliada poderão ser aplicados em situações reais da área médica, contribuindo para o acompanhamento remoto de pacientes.OBJECTIVE: To develop a computational model for acquisition, management and storing data and patients' exams, and to define a multimedia conference architecture to remote patients' follow-up. MATERIALS AND METHODS: A computational architecture was defined to acquire exams' information from hospital equipment and to store and manage patients' data and exams using the JBoss application server, the MySql database manager system, the Apache web page server and the Jboss Seam framework for application development. For multimedia conference, a case study using the Openmeetins architecture was performed. RESULTS: computational models intended to the consistent and safe management of data and patients' exams were defined and a multimedia conference architecture was studied. CONCLUSION: The computational models, the prototype developed and

  2. Narrative form

    CERN Document Server

    Keen, Suzanne

    2015-01-01

    This revised and expanded handbook concisely introduces narrative form to advanced students of fiction and creative writing, with refreshed references and new discussions of cognitive approaches to narrative, nonfiction, and narrative emotions.

  3. Fri form

    DEFF Research Database (Denmark)

    Jensen, Henrik

    2006-01-01

    Dette Kompendiun er lavet i forbindelse med en workshop i møbeldesign. En række af form-Z's værktøjer til konstruktion af dobbeltkrumme flader gennemgås. Kompendiet kan bruges til selvstudie.......Dette Kompendiun er lavet i forbindelse med en workshop i møbeldesign. En række af form-Z's værktøjer til konstruktion af dobbeltkrumme flader gennemgås. Kompendiet kan bruges til selvstudie....

  4. Automorphic Forms

    DEFF Research Database (Denmark)

    von Essen, Flemming Brændgaard

    systems. For automorphic forms wrt. Hecke triangle groups and Fuchsian groups with no elliptic elements and genus 0, we show that some logarithms of multiplier systems can be interpreted as a linking number. Finally we show a "twisted" version of the prime geodesics theorem, and logarithms of multiplier...

  5. Cosmic Forms

    CERN Document Server

    Kleman, Maurice

    2011-01-01

    The continuous 1D defects of an isotropic homogeneous material in an Euclidean 3D space are classified by a construction method, the Volterra process (VP). We employ the same method to classify the continuous 2D defects (which we call \\textit{cosmic forms}) of a vacuum in a 4D maximally symmetric spacetime. These defects fall into three different classes: i)- $m$-forms, akin to 3D space disclinations, related to ordinary rotations and analogous to Kibble's global cosmic strings (except that being continuous any deficit angle is allowed); ii)- $t$-forms, related to Lorentz boosts (hyperbolic rotations); iii)- $r$-forms, never been considered so far, related to null rotations. A detailed account of their metrics is presented. Their inner structure in many cases appears as a non-singular \\textit{core} separated from the outer part by a timelike hypersurface with distributional curvature and/or torsion, yielding new types of geometrical interactions with cosmic dislocations and other cosmic disclinations. Whereas...

  6. Ferramenta de autoria multimídia para ensino de língua estrangeira em ambiente multiagente Multimedia authorship tool for the teaching of foreign languages in a multi-agent environment

    Directory of Open Access Journals (Sweden)

    Adroaldo Guimarães Rossetti

    2009-04-01

    Full Text Available A comunicação é essencial nas atividades do mundo globalizado, onde conhecimento e tecnologia são a chave do progresso. Dominar outros idiomas nesse cenário é vital para a sustentação das pessoas no exercício de suas atividades. O sistema de ensino de línguas estrangeiras no Brasil, tanto nas escolas públicas quanto em parte das escolas particulares, não oferece condições para que as pessoas adquiram conhecimentos sólidos de língua estrangeira, conforme suas potencialidades e disponibilidades de tempo, sem prejuízo de outras atividades que exerçam no seu cotidiano. O objetivo deste artigo é apresentar uma ferramenta de autoria multimídia para ensino de língua estrangeira, disponível continuamente na Internet, que possa ser acessada de qualquer local e a qualquer momento. A ferramenta será construída baseada em arquitetura multiagente, constituindo um ambiente compartilhado semelhante à cooperação entre pessoas, cumprindo eficazmente a tarefa de ensino. Os idiomas, inicialmente inglês e francês, constarão de três módulos: básico, intermediário e avançado. Após ser disponibilizada na Web, a ferramenta será validada com base na crítica dos usuários por cerca de seis a doze meses e será avaliada periodicamente pelos gestores do programa. A ferramenta propiciará o acesso ao aprendizado eficaz de idiomas estrangeiros a quaisquer interessados, de acordo com suas potencialidades, seus interesses e tempo disponível.Communication is essential in the activities of a globalized world in which knowledge and technology are the keys to progress. In this scenario, having command of other languages is a vital support for people in their activities. The system for teaching foreign languages in Brazil, both in public schools and in part of the private institutions, fails to offer the basic conditions for people to acquire solid knowledge of a foreign language, according to their potential and time availability, and without

  7. WLAN CSMA/CA Performance in a Bluetooth Interference Environment

    Science.gov (United States)

    2003-03-01

    and Nevo [LSN01] configure a laptop with IEEE 802.11b and BT. The laptop interacts simultaneously with an 802.11b access point (AP) and another BT...International Symposium, 3:376-379, 2001. 77 [LSN01] Lansford, Jim., Adrian Stephens, and Ron Nevo . “Wi-Fi (802.11b) and Bluetooth: Enabling

  8. Tidal Forms

    Science.gov (United States)

    Bolla Pittaluga, M.; Seminara, G.; Tambroni, N.

    2003-04-01

    We give an overview of some recent investigations on the mechanics of the processes whereby forms develop in tidal environments. The viewpoint taken here is mechanistic. Some of the questions which deserve an answer may be summarised as follows: i) do tidal channels tend to some altimetric long term equilibrium? ii) why are they typically convergent and weakly meandering? iii) how is such equilibrium affected by the hydrodynamics and morphodynamics of tidal inlets? iv) what is the hydrodynamic and morphodynamic role played by tidal flats adjacent to the channels? Some of the above questions have received a considerable attention in the last few years. Schuttelaars and de Swart (1996), Lanzoni and Seminara (2002) and, more recently, Bolla Pittaluga (2003) have investigated the first problem. In particular, the latter two contributions have shown that a straight tidal channel connected to a tidal sea at one end and closed at the other end tends to reach a long term equilibrium profile, which is slightly concave seaward and convex landward where a beach forms. The equilibrium profile is strongly sensitive to the harmonic content of the tidal forcing as well as to the value of sediment concentration established by the coastal hydrodynamics in the far field of the inlet region. Less important are the effect of channel convergence and the role of settling lag in the transport of suspended load. Insufficient attention has been devoted to the understanding of what mechanisms control channel convergence and meandering, though some similarities and differences between tidal and fluvial channels have emerged from some recent works. In particular, free bars form in tidal channels due to an instability mechanism essentially similar to that occurring under steady conditions though the oscillatory character of the flow field makes the bar pattern non migrating (Seminara and Tubino, 2001). Similarly, forced bars in curved tidal channels are driven by the development of

  9. Contributors Form

    Directory of Open Access Journals (Sweden)

    Chief Editor

    2016-06-01

    to produce preprints or reprints and translate into languages other than English for sale or free distribution; and 4 the right to republish the work in a collection of articles in any other mechanical or electronic format. We give the rights to the corresponding author to make necessary changes as per the request of the journal, do the rest of the correspondence on our behalf and he/she will act as the guarantor for the manuscript on our behalf. All persons who have made substantial contributions to the work reported in the manuscript, but who are not contributors, are named in the Acknowledgment and have given me/us their written permission to be named. If I/we do not include an Acknowledgment that means I/we have not received substantial contributions from non-contributors and no contributor has been omitted.S NoAuthors' NamesContribution (IJCME Guidelines{1 substantial contributions to conception and design, acquisition of data, or analysis and interpretation of data; 2 drafting the article or revising it critically for important intellectual content; and 3 final approval of the version to be published. Authors should meet conditions 1, 2, and 3}.SignatureDate                              Note: All the authors are required to sign independently in this form in the sequence given above. In case an author has left the institution/country and whose whereabouts are not known, the senior author may sign on his/her behalf taking the responsibility.No addition/deletion/ or any change in the sequence of the authorship will be permissible at a later stage, without valid reasons and permission of the Editor.If the authorship is contested at any stage, the article will be either returned or will not be processed for publication till the issue is solved.Maximum up to 4 authors for short communication and up to 6 authors for original article.

  10. Densified waste form and method for forming

    Science.gov (United States)

    Garino, Terry J.; Nenoff, Tina M.; Sava Gallis, Dorina Florentina

    2015-08-25

    Materials and methods of making densified waste forms for temperature sensitive waste material, such as nuclear waste, formed with low temperature processing using metallic powder that forms the matrix that encapsulates the temperature sensitive waste material. The densified waste form includes a temperature sensitive waste material in a physically densified matrix, the matrix is a compacted metallic powder. The method for forming the densified waste form includes mixing a metallic powder and a temperature sensitive waste material to form a waste form precursor. The waste form precursor is compacted with sufficient pressure to densify the waste precursor and encapsulate the temperature sensitive waste material in a physically densified matrix.

  11. Heart failure drug digitoxin induces calcium uptake into cells by forming transmembrane calcium channels.

    Science.gov (United States)

    Arispe, Nelson; Diaz, Juan Carlos; Simakova, Olga; Pollard, Harvey B

    2008-02-19

    Digitoxin and other cardiac glycosides are important, centuries-old drugs for treating congestive heart failure. However, the mechanism of action of these compounds is still being elucidated. Calcium is known to potentiate the toxicity of these drugs, and we have hypothesized that digitoxin might mediate calcium entry into cells. We report here that digitoxin molecules mediate calcium entry into intact cells. Multimers of digitoxin molecules also are able to form calcium channels in pure planar phospholipid bilayers. These digitoxin channels are blocked by Al(3+) and La(3+) but not by Mg(2+) or the classical l-type calcium channel blocker, nitrendipine. In bilayers, we find that the chemistry of the lipid affects the kinetics of the digitoxin channel activity, but not the cation selectivity. Antibodies against digitoxin promptly neutralize digitoxin channels in both cells and bilayers. We propose that these digitoxin calcium channels may be part of the mechanism by which digitoxin and other active cardiac glycosides, such as digoxin, exert system-wide actions at and above the therapeutic concentration range.

  12. Careers (A Course of Study). Unit V: Forms, Forms, Forms.

    Science.gov (United States)

    Turley, Kay

    Designed to enable special needs students to understand and complete various job-related forms, this set of activities devoted to forms encountered before and after one obtains a job is the fifth in a nine-unit secondary level careers course intended to provide handicapped students with the knowledge and tools necessary to succeed in the world of…

  13. On good ETOL forms

    DEFF Research Database (Denmark)

    Skyum, Sven

    1978-01-01

    This paper continues the study of ETOL forms and good EOL forms done by Maurer, Salomaa and Wood. It is proven that binary very complete ETOL forms exist, good synchronized ETOL forms exist and that no propagating or synchronized ETOL form can be very complete.......This paper continues the study of ETOL forms and good EOL forms done by Maurer, Salomaa and Wood. It is proven that binary very complete ETOL forms exist, good synchronized ETOL forms exist and that no propagating or synchronized ETOL form can be very complete....

  14. Modular Forms and Weierstrass Mock Modular Forms

    Directory of Open Access Journals (Sweden)

    Amanda Clemm

    2016-02-01

    Full Text Available Alfes, Griffin, Ono, and Rolen have shown that the harmonic Maass forms arising from Weierstrass ζ-functions associated to modular elliptic curves “encode” the vanishing and nonvanishing for central values and derivatives of twisted Hasse-Weil L-functions for elliptic curves. Previously, Martin and Ono proved that there are exactly five weight 2 newforms with complex multiplication that are eta-quotients. In this paper, we construct a canonical harmonic Maass form for these five curves with complex multiplication. The holomorphic part of this harmonic Maass form arises from the Weierstrass ζ-function and is referred to as the Weierstrass mock modular form. We prove that the Weierstrass mock modular form for these five curves is itself an eta-quotient or a twist of one. Using this construction, we also obtain p-adic formulas for the corresponding weight 2 newform using Atkin’s U-operator.

  15. Adaptive municipal electronic forms

    NARCIS (Netherlands)

    Kuiper, Pieter; Dijk, van Betsy; Bondarouk, Tanya; Ruël, Huub; Guiderdoni-Jourdain, Karine; Oiry, Ewan

    2009-01-01

    Adaptation of electronic forms (e-forms) seems to be a step forward to reduce the burden for people who fill in forms. Municipalities more and more offer e-forms online that can be used by citizens to request a municipal product or service or by municipal employees to place a request on behalf of a

  16. Manufacturing processes 4 forming

    CERN Document Server

    Klocke, Fritz

    2013-01-01

    This book provides essential information on metal forming, utilizing a practical distinction between bulk and sheet metal forming. In the field of bulk forming, it examines processes of cold, warm and hot bulk forming, as well as rolling and a new addition, the process of thixoforming. As for the field of sheet metal working, on the one hand it deals with sheet metal forming processes (deep drawing, flange forming, stretch drawing, metal spinning and bending). In terms of special processes, the chapters on internal high-pressure forming and high rate forming have been revised and refined. On the other, the book elucidates and presents the state of the art in sheet metal separation processes (shearing and fineblanking). Furthermore, joining by forming has been added to the new edition as a new chapter describing mechanical methods for joining sheet metals. The new chapter “Basic Principles” addresses both sheet metal and bulk forming, in addition to metal physics, plastomechanics and computational basics; ...

  17. Calcium, acylation, and molecular confinement favor folding of Bordetella pertussis adenylate cyclase CyaA toxin into a monomeric and cytotoxic form.

    Science.gov (United States)

    Karst, Johanna C; Ntsogo Enguéné, V Yvette; Cannella, Sara E; Subrini, Orso; Hessel, Audrey; Debard, Sylvain; Ladant, Daniel; Chenal, Alexandre

    2014-10-31

    The adenylate cyclase (CyaA) toxin, a multidomain protein of 1706 amino acids, is one of the major virulence factors produced by Bordetella pertussis, the causative agent of whooping cough. CyaA is able to invade eukaryotic target cells in which it produces high levels of cAMP, thus altering the cellular physiology. Although CyaA has been extensively studied by various cellular and molecular approaches, the structural and functional states of the toxin remain poorly characterized. Indeed, CyaA is a large protein and exhibits a pronounced hydrophobic character, making it prone to aggregation into multimeric forms. As a result, CyaA has usually been extracted and stored in denaturing conditions. Here, we define the experimental conditions allowing CyaA folding into a monomeric and functional species. We found that CyaA forms mainly multimers when refolded by dialysis, dilution, or buffer exchange. However, a significant fraction of monomeric, folded protein could be obtained by exploiting molecular confinement on size exclusion chromatography. Folding of CyaA into a monomeric form was found to be critically dependent upon the presence of calcium and post-translational acylation of the protein. We further show that the monomeric preparation displayed hemolytic and cytotoxic activities suggesting that the monomer is the genuine, physiologically active form of the toxin. We hypothesize that the structural role of the post-translational acylation in CyaA folding may apply to other RTX toxins.

  18. Maass Forms and Quantum Modular Forms

    Science.gov (United States)

    Rolen, Larry

    This thesis describes several new results in the theory of harmonic Maass forms and related objects. Maass forms have recently led to a flood of applications throughout number theory and combinatorics in recent years, especially following their development by the work of Bruinier and Funke the modern understanding Ramanujan's mock theta functions due to Zwegers. The first of three main theorems discussed in this thesis concerns the integrality properties of singular moduli. These are well-known to be algebraic integers, and they play a beautiful role in complex multiplication and explicit class field theory for imaginary quadratic fields. One can also study "singular moduli" for special non-holomorphic functions, which are algebraic but are not necessarily algebraic integers. Here we will explain the phenomenon of integrality properties and provide a sharp bound on denominators of symmetric functions in singular moduli. The second main theme of the thesis concerns Zagier's recent definition of a quantum modular form. Since their definition in 2010 by Zagier, quantum modular forms have been connected to numerous different topics such as strongly unimodal sequences, ranks, cranks, and asymptotics for mock theta functions. Motivated by Zagier's example of the quantum modularity of Kontsevich's "strange" function F(q), we revisit work of Andrews, Jimenez-Urroz, and Ono to construct a natural vector-valued quantum modular form whose components. The final chapter of this thesis is devoted to a study of asymptotics of mock theta functions near roots of unity. In his famous deathbed letter, Ramanujan introduced the notion of a mock theta function, and he offered some alleged examples. The theory of mock theta functions has been brought to fruition using the framework of harmonic Maass forms, thanks to Zwegers. Despite this understanding, little attention has been given to Ramanujan's original definition. Here we prove that Ramanujan's examples do indeed satisfy his

  19. The Bryopsis hypnoides plastid genome: multimeric forms and complete nucleotide sequence.

    Directory of Open Access Journals (Sweden)

    Fang Lü

    Full Text Available BACKGROUND: Bryopsis hypnoides Lamouroux is a siphonous green alga, and its extruded protoplasm can aggregate spontaneously in seawater and develop into mature individuals. The chloroplast of B. hypnoides is the biggest organelle in the cell and shows strong autonomy. To better understand this organelle, we sequenced and analyzed the chloroplast genome of this green alga. PRINCIPAL FINDINGS: A total of 111 functional genes, including 69 potential protein-coding genes, 5 ribosomal RNA genes, and 37 tRNA genes were identified. The genome size (153,429 bp, arrangement, and inverted-repeat (IR-lacking structure of the B. hypnoides chloroplast DNA (cpDNA closely resembles that of Chlorella vulgaris. Furthermore, our cytogenomic investigations using pulsed-field gel electrophoresis (PFGE and southern blotting methods showed that the B. hypnoides cpDNA had multimeric forms, including monomer, dimer, trimer, tetramer, and even higher multimers, which is similar to the higher order organization observed previously for higher plant cpDNA. The relative amounts of the four multimeric cpDNA forms were estimated to be about 1, 1/2, 1/4, and 1/8 based on molecular hybridization analysis. Phylogenetic analyses based on a concatenated alignment of chloroplast protein sequences suggested that B. hypnoides is sister to all Chlorophyceae and this placement received moderate support. CONCLUSION: All of the results suggest that the autonomy of the chloroplasts of B. hypnoides has little to do with the size and gene content of the cpDNA, and the IR-lacking structure of the chloroplasts indirectly demonstrated that the multimeric molecules might result from the random cleavage and fusion of replication intermediates instead of recombinational events.

  20. Electron microscopy visualization of DNA-protein complexes formed by Ku and DNA ligase IV.

    Science.gov (United States)

    Grob, Patricia; Zhang, Teri T; Hannah, Ryan; Yang, Hui; Hefferin, Melissa L; Tomkinson, Alan E; Nogales, Eva

    2012-01-02

    The repair of DNA double-stranded breaks (DSBs) is essential for cell viability and genome stability. Aberrant repair of DSBs has been linked with cancer predisposition and aging. During the repair of DSBs by non-homologous end joining (NHEJ), DNA ends are brought together, processed and then joined. In eukaryotes, this repair pathway is initiated by the binding of the ring-shaped Ku heterodimer and completed by DNA ligase IV. The DNA ligase IV complex, DNA ligase IV/XRRC4 in humans and Dnl4/Lif1 in yeast, is recruited to DNA ends in vitro and in vivo by an interaction with Ku and, in yeast, Dnl4/Lif1 stabilizes the binding of yKu to in vivo DSBs. Here we have analyzed the interactions of these functionally conserved eukaryotic NHEJ factors with DNA by electron microscopy. As expected, the ring-shaped Ku complex bound stably and specifically to DNA ends at physiological salt concentrations. At a ratio of 1 Ku molecule per DNA end, the majority of DNA ends were occupied by a single Ku complex with no significant formation of linear DNA multimers or circular loops. Both Dnl4/Lif1 and DNA ligase IV/XRCC4 formed complexes with Ku-bound DNA ends, resulting in intra- and intermolecular DNA end bridging, even with non-ligatable DNA ends. Together, these studies, which provide the first visualization of the conserved complex formed by Ku and DNA ligase IV at juxtaposed DNA ends by electron microscopy, suggest that the DNA ligase IV complex mediates end-bridging by engaging two Ku-bound DNA ends.

  1. Fornemmelse for form

    DEFF Research Database (Denmark)

    Skude, Flemming

    2002-01-01

    Om den arkitektoniske forms afhængighed af aerodynamik, solens nedbrydning og optimering af materialers holdbarhed.......Om den arkitektoniske forms afhængighed af aerodynamik, solens nedbrydning og optimering af materialers holdbarhed....

  2. Forms of Arthritis

    Science.gov (United States)

    ... this page please turn Javascript on. Forms of Arthritis Past Issues / Fall 2006 Table of Contents Today, ... of Linda Saisselin Osteoarthritis (OA) — the form of arthritis typically occurring during middle or old age, this ...

  3. FORMS OF YOUTH TRAVEL

    OpenAIRE

    Moisã Claudia Olimpia

    2011-01-01

    Taking into account the suite of motivation that youth has when practicing tourism, it can be said that the youth travel takes highly diverse forms. These forms are educational tourism, volunteer programs and “work and travel”, cultural exchanges or sports tourism and adventure travel. In this article, we identified and analyzed in detail the main forms of youth travel both internationally and in Romania. We also illustrated for each form of tourism the specific tourism products targeting you...

  4. Forms in Space.

    Science.gov (United States)

    Moore, Paula

    1998-01-01

    Uses the work of M. C. Escher to instruct upper elementary students in the transformation of flat shape into three-dimensional form. Outlines the lesson as a series of sections: (1) reviewing form drawing; (2) creating three-dimensional effects; (3) imagining the forms in an inhabited world; and (4) using color and shading. (DSK)

  5. Mesonic Form Factors

    Energy Technology Data Exchange (ETDEWEB)

    Frederic D. R. Bonnet; Robert G. Edwards; George T. Fleming; Randal Lewis; David Richards

    2003-07-22

    We have started a program to compute the electromagnetic form factors of mesons. We discuss the techniques used to compute the pion form factor and present preliminary results computed with domain wall valence fermions on MILC asqtad lattices, as well as Wilson fermions on quenched lattices. These methods can easily be extended to rho-to-gamma-pi transition form factors.

  6. Micro metal forming

    CERN Document Server

    2013-01-01

    Micro Metal Forming, i. e. forming of parts and features with dimensions below 1 mm, is a young area of research in the wide field of metal forming technologies, expanding the limits for applying metal forming towards micro technology. The essential challenges arise from the reduced geometrical size and the increased lot size. In order to enable potential users to apply micro metal forming in production, information about the following topics are given: tribological behavior: friction between tool and work piece as well as tool wear mechanical behavior: strength and formability of the work piece material, durability of the work pieces size effects: basic description of effects occurring due to the fact, that the quantitative relation between different features changes with decreasing size process windows and limits for forming processes tool making methods numerical modeling of processes and process chains quality assurance and metrology All topics are discussed with respect to the questions relevant to micro...

  7. Profils d’apprentissage et représentations dans l’apprentissage des langues en environnement multimédia. Résultats d’une enquête en contexte universitaire. Learner profiles and attitudes in foreign language learning in a multimedia environment. Results of a survey conducted in a higher education context.

    Directory of Open Access Journals (Sweden)

    Joseph Rézeau

    1999-06-01

    Full Text Available Dans le domaine de l’apprentissage, les profils d’apprentissage et les représentations des apprenants jouent un rôle fondamental. La recherche exposée dans cet article met en évidence des différences sensibles de profil d’apprentissage des langues chez des étudiants spécialisés en langues d’une part et des étudiants d’autres disciplines d’autre part. Elle montre également que les représentations de l’apprentissage des langues et celles des Technologies de l’Information et de la Communication (TIC chez ces deux populations sont des représentations sociales, qui montrent un recouvrement entre les deux domaines étudiés. Enfin, une étude longitudinale d’un échantillon de la population étudiée montre que les profils d’apprentissage et les représentations sont susceptibles d’évolution. La question reste posée de l’influence de l’environnement multimédia d’apprentissage de la langue sur cette évolution constatée.In the field of learning, the learners’ attitudes and representations play a fundamental role. The research presented in this article shows significant differences in the language learning profiles of university students specialised in languages on the one hand and specialists of other disciplines on the other hand. Our research also shows that the representations of language learning and the representations of the Information and Communication Technologies (ICT held by the subjects in these two populations are social representations, showing overlap between the two domains studied. Finally, a longitudinal study of a sample of the population under review shows that both learners’ profiles and representations are open to evolution. The question remains of the influence exerted by the multimedia language learning environment over the said evolution.

  8. Un environnement multimédia privilégiant l’expression en langage naturel, pour des activités éducatives de type piagétien A multimedia environment favouring natural language expression, for educational piagetian games

    Directory of Open Access Journals (Sweden)

    Élisabeth Godbert

    2000-12-01

    Full Text Available Nous nous intéressons dans cet article au développement de logiciels éducatifs proposant, dans un environnement multimédia, multimodal et réactif privilégiant l’expression en langage naturel, des exercices de type piagétien pour l’aide à l’apprentissage du langage. Dans ce type de système, chaque exercice met en jeu un micro-monde d’objets graphiques sur lesquels l’enfant utilisateur peut agir (modification, déplacement, suppression d’objets, etc., en formulant des requêtes en langage naturel auxquelles le système répond. Nous présentons un logiciel éducatif de cette famille, que nous avons conçu et développé ces dernières années. Nous décrivons en premier lieu les objectifs pédagogiques et les fonctionnalités de notre logiciel, puis le système que nous y utilisons pour le traitement automatique du langage. Nous décrivons ensuite l’ensemble des composants qui structure les connaissances qu’il a été nécessaire de modéliser, articuler et gérer pour la réalisation de ce système.This paper deals with the development of educational software, which proposes, in a multimedia, multimodal and reactive environment favoring natural language expression, piagetian games designed for natural language learning. In such systems, each exercise brings into play a micro-world of graphic objects on which the user can act (for example to modify, move or withdraw the objects, by composing natural language queries to which the system gives an answer. We present a software of this type, that has been designed and implemented these last years. We firstly describe the educational objectives and the functionality of the software, then the natural language processing system which is used in it. Finally we describe the set of components that structures knowledge modeled, articulated and managed in order to carry out this educational system.

  9. Cooperative Station History Forms

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Various forms, photographs and correspondence documenting the history of Cooperative station instrumentation, location changes, inspections, and...

  10. Forming of superplastic ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Lesuer, D.R.; Wadsworth, J.; Nieh, T.G.

    1994-05-01

    Superplasticity in ceramics has now advanced to the stage that technologically viable superplastic deformation processing can be performed. In this paper, examples of superplastic forming and diffusion bonding of ceramic components are given. Recent work in biaxial gas-pressure forming of several ceramics is provided. These include yttria-stabilized, tetragonal zirconia (YTZP), a 20% alumina/YTZP composite, and silicon. In addition, the concurrent superplastic forming and diffusion bonding of a hybrid ceramic-metal structure are presented. These forming processes offer technological advantages of greater dimensional control and increased variety and complexity of shapes than is possible with conventional ceramic shaping technology.

  11. Electronic Capitalization Asset Form

    Data.gov (United States)

    Department of Transportation — National Automated Capitalization Authorization Form used by ATO Engineering Services, Logistics, Accounting for the purpose of identifying and capturing FAA project...

  12. Baryon form factors

    CERN Document Server

    Kubis, B; Meißner, Ulf G; Mei{\\ss}ner, Ulf-G.

    1999-01-01

    We calculate the form factors of the baryon octet in the framework of heavy baryon chiral perturbation theory. The calculated charge radius of the show that kaon loop effects can play a significant role in the neutron electric form factor. Furthermore. we derive generalized Caldi-Pagels relations between various charge radii which are free of chiral loop effects.

  13. Method of forming nanodielectrics

    Science.gov (United States)

    Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

    2014-01-07

    A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

  14. PowerForms

    DEFF Research Database (Denmark)

    Brabrand, Claus; Møller, Anders; Ricky, Mikkel

    2000-01-01

    All uses of HTML forms may benefit from validation of the specified input field values. Simple validation matches individual values against specified formats, while more advanced validation may involve interdependencies of form fields. There is currently no standard for specifying or implementing...

  15. Mastering HTML5 forms

    CERN Document Server

    Gupta, Gaurav

    2013-01-01

    This tutorial will show you how to create stylish forms, not only visually appealing, but interactive and customized, in order to gather valuable user inputs and information.Enhance your skills in building responsive and dynamic web forms using HTML5, CSS3, and related technologies. All you need is a basic understanding of HTML and PHP.

  16. Accurate Extraction of Nanometer Distances in Multimers by Pulse EPR

    Science.gov (United States)

    Valera, Silvia; Ackermann, Katrin; Pliotas, Christos; Huang, Hexian; Naismith, James H.

    2016-01-01

    Abstract Pulse electron paramagnetic resonance (EPR) is gaining increasing importance in structural biology. The PELDOR (pulsed electron–electron double resonance) method allows extracting distance information on the nanometer scale. Here, we demonstrate the efficient extraction of distances from multimeric systems such as membrane‐embedded ion channels where data analysis is commonly hindered by multi‐spin effects. PMID:26865468

  17. Synthesis and evaluation of radiolabeled peptide multimers for tumor targeting

    NARCIS (Netherlands)

    Yim, C.B.

    2011-01-01

    Many cancer types express specific receptors on their cellular surface onto which regulatory peptides bind with high affinity. This mechanism can be exploited by labeling the peptide with a radionuclide and using the radiolabeled peptide as a vehicle to guide the radioactivity to receptor-rich cells

  18. The role of adiponectin multimers in anorexia nervosa.

    Science.gov (United States)

    Amitani, Haruka; Asakawa, Akihiro; Ogiso, Kazuma; Nakahara, Toshihiro; Ushikai, Miharu; Haruta, Izumi; Koyama, Ken-ichiro; Amitani, Marie; Cheng, Kai-chun; Inui, Akio

    2013-01-01

    Anorexia nervosa (AN) continues to be a refractory disease because of its unknown pathogenesis. The role of adiponectin in AN has not been clarified. Moreover, few reports have described the relations between adiponectin isoforms and AN in the physical and psychological states. Therefore, we measured plasma adiponectin and its isoforms levels in patients with AN to examine their roles in AN. Eighteen women participated in this study: nine patients with AN and nine age-matched healthy controls. We examined plasma adiponectin and its isoforms levels in all subjects and administered three types of psychological test to patients with AN: the Eating Disorders Inventory-2, the Maudsley Obsessional-Compulsive Inventory, and the Beck Depression Inventory-2. We found that the percentage of high-molecular-weight (HMW) to total adiponectin (%HMW) was significantly low and the percentage of low-molecular-weight (LMW) to total adiponectin (%LMW) was significantly high in the AN group compared with the control group. The %HMW positively and the %LMW negatively correlated with body mass index in the entire study population. The %HMW was also positively correlated with psychological symptoms such as social insecurity or cleaning evaluated with the Eating Disorders Inventory-2 or the Maudsley Obsessional-Compulsive Inventory. Our study indicates that all adiponectin isoforms should be evaluated in patients with AN in addition to total adiponectin. The decreased %HMW and the increased %LMW that were correlated with the body mass index and some components of psychopathology in our patients may indicate a complex role of adiponectin isoforms in maintaining energy homeostasis and emotion during extreme malnourishment. Copyright © 2013 Elsevier Inc. All rights reserved.

  19. Study on multimers and their structures in molecular association mixture

    Institute of Scientific and Technical Information of China (English)

    NI Yi; DOU XiaoMing; ZHAO HaiYing; YIN GuangZhong; YAMAGUCHI Yoshinori; OZAKI Yukihiro

    2007-01-01

    Self-association system of (R)-1,3-butanediol in dilute carbon tetrachloride (CCl4) solution is studied as a model of molecular association mixture. Analysis methods including FSMWEFA (fixed-size moving window evolving factor analysis) combined with PCA (principal component analysis), SIMPLISMA (simple-to-use interactive self-modeling mixture analysis), and ITTFA (iterative target transformation factor analysis) are adopted to resolve infrared spectra of (R)-1,3-butanediol solution. Association number and equilibrium constant are computed. (R)-1,3-butanediol in dilute inert solution is determined as a monomer-trimer equilibrium system. Theoretical investigation of trimer structures is carried out with DFT (density functional theory), and structural factors are analyzed.

  20. Study on multimers and their structures in molecular association mixture

    Institute of Scientific and Technical Information of China (English)

    YAMAGUCHI; Yoshinori; OZAKI; Yukihiro

    2007-01-01

    Self-association system of(R)-1,3-butanediol in dilute carbon tetrachloride(CCl4)solution is studied as a model of molecular association mixture.Analysis methods including FSMWEFA(fixed-size moving window evolving factor analysis)combined with PCA(principal component analysis),SIMPLISMA (simple-to-use interactive self-modeling mixture analysis),and ITTFA(iterative target transformation factor analysis)are adopted to resolve infrared spectra of(R)-1,3-butanediol solution.Association number and equilibrium constant are computed.(R)-1,3-butanediol in dilute inert solution is determined as a monomer-trimer equilibrium system.Theoretical investigation of trimer structures is carried out with DFT(density functional theory),and structural factors are analyzed.

  1. Spin forming development

    Science.gov (United States)

    Gates, W. G.

    1982-05-01

    Bendix product applications require the capability of fabricating heavy gage, high strength materials. Five commercial sources have been identified that have the capability of spin forming metal thicknesses greater than 9.5 mm and four equipment manufacturers produce machines with this capability. Twelve assemblies selected as candidates for spin forming applications require spin forming of titanium, 250 maraging steel, 17-4 pH stainless steel, Nitronic 40 steel, 304 L stainless steel, and 6061 aluminum. Twelve parts have been cold spin formed from a 250 maraging steel 8.1 mm wall thickness machine preform, and six have been hot spin formed directly from 31.8-mm-thick flat plate. Thirty-three Ti-6Al-4V titanium alloy parts and 26 17-4 pH stainless steel parts have been hot spin formed directly from 31.8-mm-thick plate. Hot spin forming directly from plate has demonstrated the feasibility and favorable economics of this fabrication technique for Bendix applications.

  2. Laser assisted forming techniques

    Science.gov (United States)

    Kratky, Alexander

    2007-05-01

    During forming processes high deformations rates can lead to cracks and rupture very easily. Especially brittle materials like titanium or magnesium make difficulties in forming. Due to the dependence of the yield strength on temperature, forming at elevated temperatures eases processing of such materials. Since forming takes place only at localized areas of the work piece selective heating is suffcient and advantageous in most cases. Selective Laser heating offers a possibility to heat only the areas of the work piece where strongest deformations are required. For this purpose several laser sources have been tested like CO II, Diode and Nd:YAG Lasers and their advantages and disadvantages in localized heating of the work pieces will be discussed. The work presented here summarizes research activities at the Institute for Forming and High Power Laser Technology, Vienna University of Technology, on laser assisted deep drawing, laser assisted bending, wire drawing and so on during the last decade. Recent developments like roll profiling, incremental forming processes and hydro forming are discussed briefly.

  3. Circle of Form

    DEFF Research Database (Denmark)

    Jaeger, Thomas Arvid

    2012-01-01

    a common professional language like in mathematics, colour and music. The result is a weaker professionalism in the aesthetic competences compared to the professionalism and competences in other areas. A research project [1] on contrasts or opposites in form investigated the phenomenon in the fields...... by this model, and using the knowledge gathered from the other areas, especially perception psychology, it showed to be a possible way to organize contrasts in form, a system of 4 different opposites, geometric, organic, mass and structure: The Circle of Form....

  4. Forms of matter and forms of radiation

    CERN Document Server

    Kleman, Maurice

    2009-01-01

    The theory of defects in ordered and ill-ordered media is a well-advanced part of condensed matter physics. Concepts developed in this field also occur in the study of spacetime singularities, namely: i)- the topological theory of quantized defects (Kibble's cosmic strings) and ii)- the Volterra process for continuous defects, used to classify the Poincar\\'e symmetry breakings. We reassess the classification of Minkowski spacetime defects in the same theoretical frame, starting from the conjecture that these defects fall into two classes, as on they relate to massive particles or to radiation. This we justify on the empirical evidence of the Hubble's expansion. We introduce timelike and null congruences of geodesics treated as ordered media, viz. 'm'-crystals of massive particles and 'r'-crystals of massless particles, with parallel 4-momenta in M^4. Classifying their defects (or 'forms') we find (i) 'm'- and 'r'- Volterra continuous line defects and (ii) quantized topologically stable 'r'-defects, these latt...

  5. FormCalc 7

    CERN Document Server

    Agrawal, S; Mirabella, E

    2011-01-01

    We present additions and improvements in Version 7 of FormCalc, most notably analytic tensor reduction, choice of OPP methods, and MSSM initialization via FeynHiggs, as well as a parallelized Cuba library for numerical integration.

  6. Transplant Center Search Form

    Science.gov (United States)

    ... Share Your Story Give Us Feedback - A + A Transplant Center Search Form Welcome to the Blood & Marrow ... transplant centers for patients with a particular disease. Transplant Center login Username: * Password: * Request new password Join ...

  7. VMS forms Output Tables

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These output tables contain parsed and format validated data from the various VMS forms that are sent from any given vessel, while at sea, from the VMS devices on...

  8. Fannish form and content

    Directory of Open Access Journals (Sweden)

    TWC Editor

    2014-09-01

    Full Text Available This issue showcases a variety of investigations into a myriad of platforms, featuring several essays that switch the focus from content to form and illustrate the importance of a range of different fan engagements.

  9. NOAA Form 370 Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data set contains information from submitted NOAA Form 370s, also known as the Fisheries Certificate of Origin, for imported shipments of frozen and/or processed...

  10. FORM, Diagrams and Topologies

    CERN Document Server

    Herzog, Franz; Ueda, Takahiro; Vermaseren, J A M; Vogt, Andreas

    2016-01-01

    We discuss a number of FORM features that are essential in the automatic processing of very large numbers of diagrams as used in the Forcer program for 4-loop massless propagator diagrams. Most of these features are new.

  11. MAPS Appraisal Report Form

    CERN Multimedia

    HR Department

    2005-01-01

    As announced in Weekly Bulletin 48/2004, from now onwards, the paper MAPS appraisal report form has been replaced by an electronic form, which is available via EDH (on the EDH desktop under Other Tasks / HR & Training) No changes have been made to the contents of the form. Practical information will be available on the web page http://cern.ch/ais/projs/forms/maps/info.htm, and information meetings will be held on the following dates: 18 January 2005: MAIN AUDITORIUM (500-1-001) from 14:00 to 15:30. 20 January 2005: AB AUDITORIUM II (864-1-D02) from14:00 to 15:30. 24 January 2005: AT AUDITORIUM (30-7-018) from 10:00 to 11:30. Human Resources Department Tel. 73566

  12. Getting in-formed

    DEFF Research Database (Denmark)

    Hansbøl, Mikala

    det vi undersøger på form gennem vores beskrivelser. Paperet tager afsæt i empiriske eksempler fra et postdoc projekt om et såkaldt 'serious game' - Mingoville. Projektet følger circuleringer og etableringer af Mingoville 'på en global markedsplads'. I paperet diskuteres hvordan vi som forskere samler....../performer de fænomener vi forsker i. Aktør-Netværks-Teoretiker Bruno Latour (2005) pointerer at enhver beskrivelse også er en form for forklaring. En form for forklaring, der putter ting ind i et skript og dermed også putter ting på form. Paperet diskuterer to tilgange til at gøre serious games og derved skabe viden om...... engagementer med disse fænomener i serious games forskning: experimentel og etnografisk....

  13. form-Z

    DEFF Research Database (Denmark)

    Jensen, Henrik

    2002-01-01

    Kompendiet gennemgår 3d-modellering, lyssætning og rendering med form-Z. Kurset er opbygget over CAD Clasic skabelonen (se min forskning). Kompendiet kan bruges til selvstudie.......Kompendiet gennemgår 3d-modellering, lyssætning og rendering med form-Z. Kurset er opbygget over CAD Clasic skabelonen (se min forskning). Kompendiet kan bruges til selvstudie....

  14. Achieving form in autobiography

    Directory of Open Access Journals (Sweden)

    Nicholas (Nick Meihuizen

    2014-06-01

    Full Text Available This article argues that, unlike biographies which tend to follow patterns based on conventional expectations, salient autobiographies achieve forms unique to themselves. The article draws on ideas from contemporary formalists such as Peter McDonald and Angela Leighton but also considers ideas on significant form stemming from earlier writers and critics such as P.N. Furbank and Willa Cather. In extracting from these writers the elements of what they consider comprise achieved form, the article does not seek to provide a rigid means of objectively testing the formal attributes of a piece of writing. It rather offers qualitative reminders of the need to be alert to the importance of form, even if the precise nature of this importance is not possible to define. Form is involved in meaning, and this continuously opens up possibilities regarding the reader’s relationship with the work in question. French genetic critic Debray Genette distinguishes between ‘semantic effect’ (the direct telling involved in writing and ‘semiological effect’ (the indirect signification involved. It is the latter, the article argues in summation, which gives a work its singular nature, producing a form that is not predictable but suggestive, imaginative.

  15. FormFlavor Manual

    CERN Document Server

    Evans, Jared A

    2016-01-01

    This manual describes the usage and structure of FormFlavor, a Mathematica-based tool for computing a broad list of flavor and CP observables in general new physics models. Based on the powerful machinery of FeynArts and FormCalc, FormFlavor calculates the one-loop Wilson coefficients of the dimension 5 and 6 Standard Model effective Lagrangian entirely from scratch. These Wilson coefficients are then evolved down to the low scale using one-loop QCD RGEs, where they are transformed into flavor and CP observables. The last step is accomplished using a model-independent, largely stand-alone package called FFObservables that is included with FormFlavor. The SM predictions in FFObservables include up-to-date references and accurate current predictions. Using the functions and modular structure provided by FormFlavor, it is straightforward to add new observables. Currently, FormFlavor is set up to perform these calculations for the general, non-MFV MSSM, but in principle it can be generalized to arbitrary FeynArts...

  16. Comparative waste forms study

    Energy Technology Data Exchange (ETDEWEB)

    Wald, J.W.; Lokken, R.O.; Shade, J.W.; Rusin, J.M.

    1980-12-01

    A number of alternative process and waste form options exist for the immobilization of nuclear wastes. Although data exists on the characterization of these alternative waste forms, a straightforward comparison of product properties is difficult, due to the lack of standardized testing procedures. The characterization study described in this report involved the application of the same volatility, mechanical strength and leach tests to ten alternative waste forms, to assess product durability. Bulk property, phase analysis and microstructural examination of the simulated products, whose waste loading varied from 5% to 100% was also conducted. The specific waste forms investigated were as follows: Cold Pressed and Sintered PW-9 Calcine; Hot Pressed PW-9 Calcine; Hot Isostatic Pressed PW-9 Calcine; Cold Pressed and Sintered SPC-5B Supercalcine; Hot Isostatic pressed SPC-5B Supercalcine; Sintered PW-9 and 50% Glass Frit; Glass 76-68; Celsian Glass Ceramic; Type II Portland Cement and 10% PW-9 Calcine; and Type II Portland Cement and 10% SPC-5B Supercalcine. Bulk property data were used to calculate and compare the relative quantities of waste form volume produced at a spent fuel processing rate of 5 metric ton uranium/day. This quantity ranged from 3173 L/day (5280 Kg/day) for 10% SPC-5B supercalcine in cement to 83 L/day (294 Kg/day) for 100% calcine. Mechanical strength, volatility, and leach resistance tests provide data related to waste form durability. Glass, glass-ceramic and supercalcine ranked high in waste form durability where as the 100% PW-9 calcine ranked low. All other materials ranked between these two groupings.

  17. Forms of Inattentiveness

    DEFF Research Database (Denmark)

    Knudsen, Morten

    2011-01-01

    and kept out of sight in the decision processes by looking at a specific case study involving the construction of a model intended to control, and render transparent, the quality of health services in Denmark. This paper outlines the forms of inattentiveness which make communication blind to information...... that could question the quality model. Five forms of inattentiveness are identified that function as answers to the question of how communication avoids actualizing relevant but also potentially destructive information. This study documents a considerable amount of blindness to potentially relevant themes...... and it points to activities that produce this blindness as they reduce the probability that potentially destructive subjects are actualized. Information is not only something organizations need, but may also be something they protect themselves against. In that case, the forms of inattentiveness may...

  18. Physical forms of MIPs.

    Science.gov (United States)

    Biffis, Andrea; Dvorakova, Gita; Falcimaigne-Cordin, Aude

    2012-01-01

    The current state of the art in the development of methodologies for the preparation of MIPs in predetermined physical forms is critically reviewed, with particular attention being paid to the forms most widely employed in practical applications, such as spherical beads in the micro- to nanometer range, microgels, monoliths, membranes. Although applications of the various MIP physical forms are mentioned, the focus of the paper is mainly on the description of the various preparative methods. The aim is to provide the reader with an overview of the latest achievements in the field, as well as with a mean for critically evaluating the various proposed methodologies towards an envisaged application. The review covers the literature up to early 2010, with special emphasis on the developments of the last 10 years.

  19. Methods for forming particles

    Energy Technology Data Exchange (ETDEWEB)

    Fox, Robert V.; Zhang, Fengyan; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin

    2016-06-21

    Single source precursors or pre-copolymers of single source precursors are subjected to microwave radiation to form particles of a I-III-VI.sub.2 material. Such particles may be formed in a wurtzite phase and may be converted to a chalcopyrite phase by, for example, exposure to heat. The particles in the wurtzite phase may have a substantially hexagonal shape that enables stacking into ordered layers. The particles in the wurtzite phase may be mixed with particles in the chalcopyrite phase (i.e., chalcopyrite nanoparticles) that may fill voids within the ordered layers of the particles in the wurtzite phase thus produce films with good coverage. In some embodiments, the methods are used to form layers of semiconductor materials comprising a I-III-VI.sub.2 material. Devices such as, for example, thin-film solar cells may be fabricated using such methods.

  20. Methods for forming particles

    Science.gov (United States)

    Fox, Robert V.; Zhang, Fengyan; Rodriguez, Rene G.; Pak, Joshua J.; Sun, Chivin

    2016-06-21

    Single source precursors or pre-copolymers of single source precursors are subjected to microwave radiation to form particles of a I-III-VI.sub.2 material. Such particles may be formed in a wurtzite phase and may be converted to a chalcopyrite phase by, for example, exposure to heat. The particles in the wurtzite phase may have a substantially hexagonal shape that enables stacking into ordered layers. The particles in the wurtzite phase may be mixed with particles in the chalcopyrite phase (i.e., chalcopyrite nanoparticles) that may fill voids within the ordered layers of the particles in the wurtzite phase thus produce films with good coverage. In some embodiments, the methods are used to form layers of semiconductor materials comprising a I-III-VI.sub.2 material. Devices such as, for example, thin-film solar cells may be fabricated using such methods.

  1. Incentive to Form

    DEFF Research Database (Denmark)

    Thomsen, Bente Dahl; Madsen, Klaus

    2011-01-01

    Projektet ’Incitament til Form' har identificeret en række tematiske angreb på formstudier - i stærkt papir – som skaber nye former, hvor af en eller flere ofte indeholder stærkere kvaliteter end udgangspunktet. Incitamenter er, i denne sammenhæng, former skabt ved foldning over variationer af lige...... af hans formstudierne gennem dialog og præsentation af incitamenter. Dialogen om form og læringsrums aktiviteter der var centrale for Lynges pædagogik. Dialogen og formeksperimenter kombineres med opfordringer til at søge inspiration i naturen og videnskabelige udredninger. De tematiske angreb er...

  2. Sixth form pure mathematics

    CERN Document Server

    Plumpton, C

    1968-01-01

    Sixth Form Pure Mathematics, Volume 1, Second Edition, is the first of a series of volumes on Pure Mathematics and Theoretical Mechanics for Sixth Form students whose aim is entrance into British and Commonwealth Universities or Technical Colleges. A knowledge of Pure Mathematics up to G.C.E. O-level is assumed and the subject is developed by a concentric treatment in which each new topic is used to illustrate ideas already treated. The major topics of Algebra, Calculus, Coordinate Geometry, and Trigonometry are developed together. This volume covers most of the Pure Mathematics required for t

  3. Avaliação de habilidades sociais de crianças com um inventário multimídia: indicadores sociométricos associados a freqüência versus dificuldade Evaluation of children’s social skills using a multimedia social skills inventoire: psichometric indexes of frequency versus difficulty

    Directory of Open Access Journals (Sweden)

    Zilda Aparecida Pereira Del Prette

    2002-06-01

    Full Text Available A literatura sobre avaliação da competência social e das habilidades sociais é permeada de resultados controvertidos, provavelmente devidos ao uso de diferentes indicadores, informantes e conceitos norteadores. Dada a relevância dessas questões, em particular da auto-avaliação de crianças, e a relativa escassez de estudos a seu respeito, este artigo relata uma pesquisa que teve por objetivo comparar diferenças e semelhanças em algumas propriedades psicométricas, associadas a indicadores de freqüência e dificuldade de desempenhos sociais obtidos com o "Inventário multimídia de habilidades sociais para crianças" (IMHSC-Del-Prette. O IMHSC-Del-Prette foi aplicado inicialmente a 406 escolares de 7 a 13 anos (média =8, de ambos os sexos, com diferentes graus de dificuldade de aprendizagem, e reaplicado um mês depois com 191 (47% estudantes dessa amostra. Os resultados foram mais favoráveis ao indicador de dificuldade que ao de freqüência nos seguintes aspectos: simetria na distribuição dos escores, consistência interna, correlação entre teste e reteste, índices de discriminação entre itens e escores e estrutura fatorial (quatro ao invés de três fatores. São discutidas as implicações metodológicas e práticas desses resultados, indicando-se novas direções de pesquisa.The field of the social competence and social skills evaluation are permeated of contradictory results, largely associated to the use, in many studies, of different indexes, informers and concepts. Given the relevance and relative scarcity of studies on that subject, in particular about children's self-evaluation, the present paper aims to compare differences and similarities, in some psychometric properties associated to two indicators - frequency and difficulty of skilled social reactions - obtained with a Multimedia Social Skills Inventoire for Children (MUSSIC-Del-Prette. MUSSIC-Del-Prette was applied initially to 406 children of 7 a 13 years old

  4. Metal forming and lubrication

    DEFF Research Database (Denmark)

    Bay, Niels

    2000-01-01

    Lubrication is essential in most metal forming processes. The lubricant film has two basic functions, [1]: i. to separate the work piece and tool surfaces and ii. to cool the workpiece and the tool. Separation of the two surfaces implies lower friction facilitating deformation and lowering the tool...... deformation step to avoid overheating and breakdown of the lubricant....

  5. Geodiversity and land form

    Science.gov (United States)

    Gray, Murray

    2014-05-01

    The Earth's surface has a dynamic and topographically varied natural landscape. In some cases the resulting landforms are given generic names reflecting their form and/or origin, (e.g. sand dunes, eskers, ox-bow lakes) but in many cases the land surface has a more amorphous form and is less easily categorized other than at a landscape scale (e.g. dissected plateau, Chalk downland). Across much of Europe, while the natural vegetation has been removed or radically modified, the natural land form/topography remains in tact. In this context and in terms of geoconservation we ought to be: • allowing the dynamic natural processes that create, carve and modify landscapes to continue to operate; and • retaining natural topographic character and geomorphological authenticity in the face of human actions seeking to remodel the land surface. In this presentation examples of this approach to geoconservation of land form will be given from the UK and other parts of the world. This will include examples of both appropriate and inappropriate topographic modifications.

  6. Measuring urban form

    NARCIS (Netherlands)

    Berghauser Pont, M.Y.

    2011-01-01

    For many, the notion of ‘measuring urban form’ will sound disturbing. Urban form is about visual images of cities, experiences, feelings, memories of place, thoughts and intellectual constructs anchored in the realm of the arts and the humanities. Anne Vernez Moudon however gives in the paper Urbani

  7. Supercongruences via modular forms

    CERN Document Server

    Osburn, Robert

    2009-01-01

    We prove two supercongruences for the coefficients of power series expansions in t of modular forms where t is a modular function. As a result, we settle two recent conjectures of Chan, Cooper and Sica. Additionally, we provide a table of supercongruences for numbers which appear in similar power series expansions and in the study of integral solutions of Apery-like differential equations.

  8. Forming of Thermoplastic Composites

    NARCIS (Netherlands)

    Haanappel, S.P.; Sachs, U.; Thije, ten R.H.W.; Rietman, A.D.; Akkerman, R.

    2012-01-01

    Design and production guidelines for UD reinforced thermoplastic composites are highly desirable. Therefore, forming experiments and simulations with a realistic complex shaped product were conducted. Thermoforming experiments with quasi-isotropic UD carbon/PEEK and 8HS woven glass/PPS composites sh

  9. Many Forms of Culture

    Science.gov (United States)

    Cohen, Adam B.

    2009-01-01

    Psychologists interested in culture have focused primarily on East-West differences in individualism-collectivism, or independent-interdependent self-construal. As important as this dimension is, there are many other forms of culture with many dimensions of cultural variability. Selecting from among the many understudied cultures in psychology,…

  10. On Quadratic Differential Forms

    NARCIS (Netherlands)

    Willems, J.C.; Trentelman, H.L.

    1998-01-01

    This paper develops a theory around the notion of quadratic differential forms in the context of linear differential systems. In many applications, we need to not only understand the behavior of the system variables but also the behavior of certain functionals of these variables. The obvious cases w

  11. eta ' transition form factors

    NARCIS (Netherlands)

    Amo Sanchez, del P.; Raven, H.G.; Snoek, H.; BaBar, Collaboration

    2011-01-01

    eta((')) transition form factors in the momentum-transfer range from 4 to 40 GeV(2). The analysis is based on 469 fb(-1) of integrated luminosity collected at PEP-II with the BABAR detector at e(+)e(-) center-of-mass energies near 10.6 GeV.

  12. Three-form cosmology

    Energy Technology Data Exchange (ETDEWEB)

    Koivisto, Tomi S., E-mail: T.Koivisto@ThPhys.Uni-Heidelberg.d [Institute for Theoretical Physics, University of Heidelberg, 69120 (Germany); Nunes, Nelson J. [Institute for Theoretical Physics, University of Heidelberg, 69120 (Germany)

    2010-03-01

    Cosmology of self-interacting three-forms is investigated. The minimally coupled canonical theory can naturally generate a variety of isotropic background dynamics, including scaling, possibly transient acceleration and phantom crossing. An intuitive picture of the cosmological dynamics is presented employing an effective potential. Numerical solutions and analytical approximations are provided for scenarios which are potentially important for inflation or dark energy.

  13. Formed HIP Can Processing

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, Kester Diederik [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-07-27

    The intent of this report is to document a procedure used at LANL for HIP bonding aluminum cladding to U-10Mo fuel foils using a formed HIP can for the Domestic Reactor Conversion program in the NNSA Office of Material, Management and Minimization, and provide some details that may not have been published elsewhere. The HIP process is based on the procedures that have been used to develop the formed HIP can process, including the baseline process developed at Idaho National Laboratory (INL). The HIP bonding cladding process development is summarized in the listed references. Further iterations with Babcock & Wilcox (B&W) to refine the process to meet production and facility requirements is expected.

  14. Tube-Forming Assays.

    Science.gov (United States)

    Brown, Ryan M; Meah, Christopher J; Heath, Victoria L; Styles, Iain B; Bicknell, Roy

    2016-01-01

    Angiogenesis involves the generation of new blood vessels from the existing vasculature and is dependent on many growth factors and signaling events. In vivo angiogenesis is dynamic and complex, meaning assays are commonly utilized to explore specific targets for research into this area. Tube-forming assays offer an excellent overview of the molecular processes in angiogenesis. The Matrigel tube forming assay is a simple-to-implement but powerful tool for identifying biomolecules involved in angiogenesis. A detailed experimental protocol on the implementation of the assay is described in conjunction with an in-depth review of methods that can be applied to the analysis of the tube formation. In addition, an ImageJ plug-in is presented which allows automatic quantification of tube images reducing analysis times while removing user bias and subjectivity.

  15. The Form of Gentrification

    CERN Document Server

    Venerandi, Alessandro; Romice, Ombretta; Porta, Sergio

    2014-01-01

    Many socioeconomic studies have been carried out to explain the phenomenon of gentrification. Although results of these works shed light on the process around this phenomenon, a perspective which focuses on the relationship between city form and gentrification is still missing. With this paper we try to address this gap by studying and comparing, through classic methods of mathematical statistics, morphological features of five London gentrified neighbourhoods. Outcomes confirm that areas which have undergone gentrification display similar and recognizable morphological patterns in terms of urban type and geographical location of main and local roads as well as businesses. These initial results confirm findings from previous research in urban sociology, and highlight the role of urban form in contributing to shape dynamics of non-spatial nature in cities.

  16. Sleep disorders - resistant forms

    OpenAIRE

    Koláčková, Pavla

    2016-01-01

    Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of Biological and Medical Sciences Candidate: Pavla Koláčková Supervisor: Doc. RNDr. Vladimír Semecký, CSc. Name of dissertation: Sleep disorders - resistant forms The diploma thesis is about sleep disorders. Sleep disorders are a global problem, lots of people have these problems. This diploma thesis focuses on American International Classification of Sleep Disorders (ICSD) and its application in clinical practice...

  17. Parking and Urban Form

    OpenAIRE

    Brueckner, Jan K.; Franco, Sofia F.

    2015-01-01

    This paper analyzes the provision of residential parking in a monocentric city, with the ultimate goal of appraising the desirability and effects of regulations such as a minimum-parking requirement (MPR) per dwelling. The analysis considers three different regimes for provision of parking space: surface parking, underground parking, and structural parking, with the latter two regimes involving capital investment either in the form of an underground parking garage or an above-ground parking s...

  18. Nucleon Electromagnetic Form Factors

    Energy Technology Data Exchange (ETDEWEB)

    Kees de Jager

    2004-08-01

    Although nucleons account for nearly all the visible mass in the universe, they have a complicated structure that is still incompletely understood. The first indication that nucleons have an internal structure, was the measurement of the proton magnetic moment by Frisch and Stern (1933) which revealed a large deviation from the value expected for a point-like Dirac particle. The investigation of the spatial structure of the nucleon, resulting in the first quantitative measurement of the proton charge radius, was initiated by the HEPL (Stanford) experiments in the 1950s, for which Hofstadter was awarded the 1961 Nobel prize. The first indication of a non-zero neutron charge distribution was obtained by scattering thermal neutrons off atomic electrons. The recent revival of its experimental study through the operational implementation of novel instrumentation has instigated a strong theoretical interest. Nucleon electro-magnetic form factors (EMFFs) are optimally studied through the exchange of a virtual photon, in elastic electron-nucleon scattering. The momentum transferred to the nucleon by the virtual photon can be selected to probe different scales of the nucleon, from integral properties such as the charge radius to scaling properties of its internal constituents. Polarization instrumentation, polarized beams and targets, and the measurement of the polarization of the recoiling nucleon have been essential in the accurate separation of the charge and magnetic form factors and in studies of the elusive neutron charge form factor.

  19. 78 FR 58605 - Proposed Collection; Comment Request for Form 8453-EMP, Form 8453-F, Form 8453-FE, Form 8879-F...

    Science.gov (United States)

    2013-09-24

    ... Internal Revenue Service Proposed Collection; Comment Request for Form 8453-EMP, Form 8453-F, Form 8453-FE, Form 8879-F, and 8879-EMP. AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice and request...- file Return; Form 8453-EMP, Employment Tax Declaration for an IRS e- file Return; Form 8879-EMP, IRS...

  20. [Adhesive cutaneous pharmaceutical forms].

    Science.gov (United States)

    Gafiţanu, E; Matei, I; Mungiu, O C; Pavelescu, M; Mîndreci, I; Apostol, I; Ionescu, G

    1989-01-01

    The adhesive cutaneous pharmaceutical forms aimed to local action release the drug substance in view of a dermatological, traumatological, antirheumatic, cosmetic action. Two such preparations were obtained and their stability, consistency and pH were determined. The "in vitro" tests of their bioavailability revealed the dynamics of calcium ions release according to the associations of each preparation. The bioavailability determined by evaluating the pharmacological response demonstrated the antiinflammatory action obtained by the association of calcium ions with the components extracted from poplar muds. The therapeutical efficiency of the studied preparations has proved in the treatment of some sport injuries.

  1. Advanced forming technology

    Directory of Open Access Journals (Sweden)

    J. Kliber

    2016-10-01

    Full Text Available Forming is usually the final stage of metallurgical production of steel (90 % of the 1,7 billion tons of total steel production in the world and traditionally also largely of the products made of non-ferrous metals. Many procedures and methods exist and we will focus only on some of them. The aim is usually to achieve ultra-fine grained structure, the proper microstructure and (mechanical / electrical properties in innovative materials. The presented article mentions only some examples.

  2. Code Optimization in FORM

    CERN Document Server

    Kuipers, J; Vermaseren, J A M

    2013-01-01

    We describe the implementation of output code optimization in the open source computer algebra system FORM. This implementation is based on recently discovered techniques of Monte Carlo tree search to find efficient multivariate Horner schemes, in combination with other optimization algorithms, such as common subexpression elimination. For systems for which no specific knowledge is provided it performs significantly better than other methods we could compare with. Because the method has a number of free parameters, we also show some methods by which to tune them to different types of problems.

  3. Do naked singularities form?

    CERN Document Server

    Vaz, C; Vaz, Cenalo; Witten, Louis

    1995-01-01

    A naked singularity is formed by the collapse of a Sine-Gordon soliton in 1+1 dimensional dilaton gravity with a negative cosmological constant. We examine the quantum stress tensor resulting from the formation of the singularity. Consistent boundary conditions require that the incoming soliton is accompanied by a flux of incoming radiation across past null infinity, but neglecting the back reaction of the spacetime leads to the absurd conclusion that the total energy entering the system by the time the observer is able to receive information from the singularity is infinite. We conclude that the back reaction must prevent the formation of the naked singularity.

  4. Bipolar pulse forming line

    Science.gov (United States)

    Rhodes, Mark A.

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  5. The forms of prophecy

    Directory of Open Access Journals (Sweden)

    Rayco González

    2013-11-01

    Full Text Available The prophecy is a kind of text holding therefore its own textual marks, differing from other kinds of texts. In order to do a discursive analysis of it, we must bring a semiotic study of its own possible forms. It includes its intertextual connections, as well as the use of typical tropos and topoi. Our aim is to describe the features of a kind of text that seems to appear in every well-known culture. Our analysis is limited to religious prophecies, showing mainly several examples from Judeo-Christian tradition, but also from other cultures, according to our line of argument. Amongst its features we find the use of allusion, forcing to any addressee to expand all possible interpretations. Likewise the prophecy seems to fulfill the double function of threat/promise, depending on each addressee.

  6. Le forme del fondo

    Directory of Open Access Journals (Sweden)

    Michel Maffesoli

    2004-12-01

    Full Text Available Non è vero che la natura ha paura del vuoto. Forse addirittura si completa. Il vuoto è anche una modalità dell'essere. È possibile nidificarvisi, avvolgersi pigramente e, così, proteggersi dall'angoscia del tempo che passa. Il vuoto delle apparenze è, in alcuni momenti, una delle forme d'espressione della vita sociale. Oltretutto occorre saperle riconoscere. Certamente, abbiamo tutti un'esistenza personale, ma siamo, ugualmente, i rappresentanti, a volte anche le vittime, di uno "spirito comune", forse anche di un "inconscio collettivo" che si è costituito di secolo in secolo. E, molto spesso, quando crediamo di esprimere le nostre idee, siamo soltanto dei portavoce, comparse di un vasto "theatrum mundi" dalle dimensioni infinite.

  7. ELEMENTAL FORMS OF HOSPITALITY

    Directory of Open Access Journals (Sweden)

    Maximiliano Emanuel Korstanje

    2010-11-01

    Full Text Available Modern studies emphasized on the needs of researching the hospitality as relevant aspects of tourism and hospitality fields. Anyway, these approaches are inextricably intertwined to the industry of tourism and do not take seriously the anthropological and sociological roots of hospitality. In fact, the hotel seems to be a partial sphere of hospitality at all. Under this context, the present paper explores the issue of hospitality enrooted in the political and economic indo-European principle of free-transit which is associated to a much broader origin.  Starting from the premise etymologically hostel and hospital share similar origins, we follow the contributions of J Derrida to determine the elements that formed the hospitality up to date.

  8. Paramodular Cusp Forms

    CERN Document Server

    Poor, Cris

    2009-01-01

    We classify Siegel modular cusp forms of weight two for the paramodular group K(p) for primes p< 600. We find that weight two Hecke eigenforms beyond the Gritsenko lifts correspond to certain abelian varieties defined over the rationals of conductor p. The arithmetic classification is in a companion article by A. Brumer and K. Kramer. The Paramodular Conjecture, supported by these computations and consistent with the Langlands philosophy and the work of H. Yoshida, is a partial extension to degree 2 of the Shimura-Taniyama Conjecture. These nonlift Hecke eigenforms share Euler factors with the corresponding abelian variety $A$ and satisfy congruences modulo \\ell with Gritsenko lifts, whenever $A$ has rational \\ell-torsion.

  9. Pion form factor

    Energy Technology Data Exchange (ETDEWEB)

    Ryong Ji, C.; Pang, A.; Szczepaniak, A. [North Carolina State Univ., Raleigh, NC (United States)

    1994-04-01

    It is pointed out that the correct criterion to define the legal PQCD contribution to the exclusive processes in the lightcone perturbative expansion should be based on the large off-shellness of the lightcone energy in the intermediate states. In the lightcone perturbative QCD calculation of the pion form factor, the authors find that the legal PQCD contribution defined by the lightcone energy cut saturates in the smaller Q{sup 2} region compared to that defined by the gluon four-momentum square cut. This is due to the contribution by the highly off-energy-shell gluons in the end point regions of the phase space, indicating that the gluon four-momentum-square cut may have cut too much to define the legal PQCD.

  10. Nucleon Electromagnetic Form Factors

    Energy Technology Data Exchange (ETDEWEB)

    Marc Vanderhaeghen; Charles Perdrisat; Vina Punjabi

    2007-10-01

    There has been much activity in the measurement of the elastic electromagnetic proton and neutron form factors in the last decade, and the quality of the data has greatly improved by performing double polarization experiments, in comparison with previous unpolarized data. Here we review the experimental data base in view of the new results for the proton, and neutron, obtained at JLab, MAMI, and MIT-Bates. The rapid evolution of phenomenological models triggered by these high-precision experiments will be discussed, including the recent progress in the determination of the valence quark generalized parton distributions of the nucleon, as well as the steady rate of improvements made in the lattice QCD calculations.

  11. Weird past tense forms.

    Science.gov (United States)

    Xu, F; Pinker, S

    1995-10-01

    It is often assumed that children go through a stage in which they systematically overapply irregular past tense patterns to inappropriate verbs, as in wipe-wope, bring-brang, trick-truck, walk-has walken. Such errors have been interpreted both as reflecting over-use of minor grammatical rules (e.g. 'change i to a'), and as reflecting the operation of a connectionist pattern associator network that superimposes and blends patterns of various degrees of generality. But the actual rate, time course, and nature of these errors have never been documented. We analysed 20,000 past tense and participle usages from nine children in the CHILDES database, looking for overapplications of irregular vowel-change patterns, as in brang, blends, as in branged, productive suffixations of -en, as in walken, gross distortions, as in mail-membled, and double-suffixation, as in walkeded. These errors were collectively quite rare; children made them in about two tenths of one per cent of the opportunities, and with few stable patterns: the errors were not predominantly word-substitutions, did not occur predominantly with irregular stems, showed no consistency across verbs or ages, and showed no clear age trend. Most (though not all) of the errors were based closely on existing irregular verbs; gross distortions never occurred. We suggest that both rule-theories and connectionist theories have tended to overestimate the predominance of such errors. Children master irregular forms quite accurately, presumably because irregular forms are just a special case of the arbitrary sound-meaning pairings that define words, and because children are good at learning words.

  12. Forming Spirals From Shadows

    Science.gov (United States)

    Kohler, Susanna

    2016-07-01

    What causes the large-scale spiral structures found in some protoplanetary disks? Most models assume theyre created by newly-forming planets, but a new study suggests that planets might have nothing to do with it.Perturbations from Planets?In some transition disks protoplanetary disks with gaps in their inner regions weve directly imaged large-scale spiral arms. Many theories currently attribute the formation of these structures to young planets: either the direct perturbations of a planet embedded in the disk cause the spirals, or theyre indirectly caused by the orbit of a planetary body outside of the arms.Another example of spiral arms detected in a protoplanetary disk, MWC 758. [NASA/ESA/ESO/M. Benisty et al.]But what if you could get spirals without any planets? A team of scientists led by Matas Montesinos (University of Chile) have recently published a study in which they examine what happens to a shadowed protoplanetary disk.Casting Shadows with WarpsIn the teams setup, they envision a protoplanetary disk that is warped: the inner region is slightly tilted relative to the outer region. As the central star casts light out over its protoplanetary disk, this disk warping would cause some regions of the disk to be shaded in a way that isnt axially symmetric with potentially interesting implications.Montesinos and collaborators ran 2D hydrodynamics simulations to determine what happens to the motion of particles within the disk when they pass in and out of the shadowed regions. Since the shadowed regions are significantly colder than the illuminated disk, the pressure in these regions is much lower. Particles are therefore accelerated and decelerated as they pass through these regions, and the lack of axial symmetry causes spiral density waves to form in the disk as a result.Initial profile for the stellar heating rate per unit area for one of the authors simulations. The regions shadowed as a result of the disk warp subtend 0.5 radians each (shown on the left

  13. Moon (Form-Origin)

    Science.gov (United States)

    Tsiapas, Elias

    2016-04-01

    When the Earth was formed, it was in a state of burning heat. As time went by, temperature on the planet's surface was falling due to radiation and heat transfer, and various components (crusts) began taking solid form at the Earth's poles. The formation of crusts took place at the Earth's poles, because the stirring of burning and fluid masses on the surface of the Earth was significantly slighter there than it was on the equator. Due to centrifugal force and Coriolis Effect, these solid masses headed towards the equator; those originating from the North Pole followed a south-western course, while those originating from the South Pole followed a north-western course and there they rotated from west to east at a lower speed than the underlying burning and liquid earth, because of their lower initial linear velocity, their solid state and inertia. Because inertia is proportional to mass, the initially larger solid body swept all new solid ones, incorporating them to its western side. The density of the new solid masses was higher, because the components on the surface would freeze and solidify first, before the underlying thicker components. As a result, the western side of the initial islet of solid rocks submerged, while the east side elevated. . As a result of the above, this initial islet began to spin in reverse, and after taking on the shape of a sphere, it formed the "heart" of the Moon. The Moon-sphere, rolling on the equator, would sink the solid rocks that continued to descend from the Earth's poles. The sinking rocks partially melted because of higher temperatures in the greater depths that the Moon descended to, while part of the rocks' mass bonded with the Moon and also served as a heat-insulating material, preventing the descended side of the sphere from melting. Combined with the Earth's liquid mass that covered its emerging eastern surface, new sphere-shaped shells were created, with increased density and very powerful structural cohesion. During the

  14. Moon (Form-Origin)

    Science.gov (United States)

    Tsiapas, Elias; Soumelidou, Despina; Tsiapas, Christos

    2017-04-01

    When the Earth was formed, it was in a state of burning heat. As time went by, temperature on the planet's surface was falling due to radiation and heat transfer, and various components (crusts) began taking solid form at the Earth's poles. The formation of crusts took place at the Earth's poles, because the stirring of burning and fluid masses on the surface of the Earth was significantly slighter there than it was on the equator. Due to centrifugal force and Coriolis Effect, these solid masses headed towards the equator; those originating from the North Pole followed a south-western course, while those originating from the South Pole followed a north-western course and there they rotated from west to east at a lower speed than the underlying burning and liquid earth, because of their lower initial linear velocity, their solid state and inertia. Because inertia is proportional to mass, the initially larger solid body swept all new solid ones, incorporating them to its western side. The density of the new solid masses was higher, because the components on the surface would freeze and solidify first, before the underlying thicker components. As a result, the western side of the initial islet of solid rocks submerged, while the east side elevated. . As a result of the above, this initial islet began to spin in reverse, and after taking on the shape of a sphere, it formed the "heart" of the Moon. The Moon-sphere, rolling on the equator, would sink the solid rocks that continued to descend from the Earth's poles. The sinking rocks partially melted because of higher temperatures in the greater depths that the Moon descended to, while part of the rocks' mass bonded with the Moon and also served as a heat-insulating material, preventing the descended side of the sphere from melting. Combined with the Earth's liquid mass that covered its emerging eastern surface, new sphere-shaped shells were created, with increased density and very powerful structural cohesion. During the

  15. Group valued differential forms revisited

    DEFF Research Database (Denmark)

    Kock, Anders

    We study the relationship between combinatorial group valued differential forms, and classical differential forms with values in the corresponding Lie algebra. In particular, we compare simplicial coboundary and exterior derivative for 1-forms. The results represent strengthenings of results...

  16. Group valued differential forms revisited

    DEFF Research Database (Denmark)

    Kock, Anders

    We study the relationship between combinatorial group valued differential forms, and classical differential forms with values in the corresponding Lie algebra. In particular, we compare simplicial coboundary and exterior derivative for 1-forms. The results represent strengthenings of results...

  17. Les formes du fond

    Directory of Open Access Journals (Sweden)

    Michel Maffesoli

    2004-12-01

    Full Text Available Il n'est pas vrai que la nature a horreur du vide. Peut-être même s'y complait-elle. Le creux est aussi une modalité de l'être. Il est possible de s'y nicher, de s'y lover paresseusement et, ainsi, de se protéger contre l'angoisse du temps qui passe. Le creux des apparences est, à certains moments, une des formes d'expression de la vie sociale. Encore faut-il savoir le reconnaître. Certes, nous avons tous une existence personnelle, mais nous sommes, également, les représentants, parfois même les victimes, d'un "esprit commun", peut-être même d'un "inconscient collectif" qui s'est constitué de siècle en siècle. Et, très souvent, là où nous croyons exprimer nos propres idées, nous ne sommes que les porte-voix, les figurants d'un vaste "theatrum mundi" aux dimensions infinies.

  18. Massive star forming environments

    Science.gov (United States)

    Devine, Kathryn Elizabeth

    2010-12-01

    We present a study of the earliest stages of massive star formation, in which we focus on Infrared Dark Clouds (IRDCs) and young massive clusters. We present Very Large Array spectral line observations of ammonia (NH 3) and CCS toward four IRDCs. The NH3 lines provide diagnostics of the temperature and density structure within IRDCs. Based upon the NH 3 column density, IRDCs have masses of ˜ 103 to 10 4 M⊙ . We detect twenty NH3 clumps within four IRDCs, with radii regions are presented from the Near Infrared Imager (NIRIM) camera on the 3.5 m WIYN telescope. We report J, H, and K' band photometry in the clusters AFGL437, AFGL5180, and AFGL5142 and use these results to probe the stellar populations, extinction, and ages of the clusters. We find that all three clusters suffer significant extinction (AK ˜1), have ages ≤ 5 Myr, and are actively forming stars. We conclude that the properties of these embedded clusters are consistent with their evolving from IRDC clumps.

  19. Image forming apparatus

    DEFF Research Database (Denmark)

    2005-01-01

    An image H(x, y) for displaying a target image G(x, y) is displayed on a liquid-crystal display panel and illumination light from an illumination light source is made to pass therethrough to form an image on a PALSLM. Read light hv is radiated to the PALSLM and a phase-modulated light image alpha...... (x, y) read out of the PALSLM is subjected to Fourier transform by a lens. A phase contrast filter gives a predetermined phase shift to only the zero-order light component of Fourier light image alpha f(x, y). The phase-shifted light image is subjected to inverse Fourier transform by a lens...... to project an output image O(x, y) to an output plane. A light image O'(x, y) branched by a beam sampler is picked up by a pickup device and an evaluation value calculating unit evaluates conformity between the image O(x, y) and the image G(x, y).; A control unit performs feedback control of optical...

  20. Watching How Planets Form

    Science.gov (United States)

    2006-09-01

    Anatomy of a Planet-Forming Disc around a Star More Massive than the Sun With the VISIR instrument on ESO's Very Large Telescope, astronomers have mapped the disc around a star more massive than the Sun. The very extended and flared disc most likely contains enough gas and dust to spawn planets. It appears as a precursor of debris discs such as the one around Vega-like stars and thus provides the rare opportunity to witness the conditions prevailing prior to or during planet formation. "Planets form in massive, gaseous and dusty proto-planetary discs that surround nascent stars. This process must be rather ubiquitous as more than 200 planets have now been found around stars other than the Sun," said Pierre-Olivier Lagage, from CEA Saclay (France) and leader of the team that carried out the observations. "However, very little is known about these discs, especially those around stars more massive than the Sun. Such stars are much more luminous and could have a large influence on their disc, possibly quickly destroying the inner part." The astronomers used the VISIR instrument [1] on ESO's Very Large Telescope to map in the infrared the disc surrounding the young star HD 97048. With an age of a few million years [2], HD 97048 belongs to the Chameleon I dark cloud, a stellar nursery 600 light-years away. The star is 40 times more luminous than our Sun and is 2.5 times as massive. The astronomers could only have achieved such a detailed view due to the high angular resolution offered by an 8-metre size telescope in the infrared, reaching a resolution of 0.33 arcsecond. They discovered a very large disc, at least 12 times more extended than the orbit of the farthest planet in the Solar System, Neptune. The observations suggest the disc to be flared. "This is the first time such a structure, predicted by some theoretical models, is imaged around a massive star," said Lagage. ESO PR Photo 36/06 ESO PR Photo 36/06 A Flared Proto-Planetary Disc Such a geometry can only be

  1. Forms of War

    Energy Technology Data Exchange (ETDEWEB)

    Vogel, H. [Asklepios Klinik St. Georg, Roentgenabteilung, Lohmuehlenstrasse 5, 20099 Hamburg (Germany)], E-mail: Hermann.vogel@ak-stgeorg.lbk-hh.de; Bartelt, D. [Asklepios Klinik St. Georg, Roentgenabteilung, Lohmuehlenstrasse 5, 20099 Hamburg (Germany)

    2007-08-15

    Purpose: Under war conditions, employed weapons can be identified on radiographs obtained in X-ray diagnostic. The analysis of such X-ray films allows concluding that there are additional information about the conditions of transport and treatment; it shall be shown that there are X-ray findings which are typical and characteristic for certain forms of warfare. Material and method: The radiograms have been collected during thirty years; they come from hospitals, where war casualties had been treated, and personal collections. Results: The material is selected, because in war X-ray diagnostic will be limited and the interest of the opposing parties influence the access to the material; furthermore the possibilities to publish or to communicate facts and thoughts are different. Citizens of the USA, GB, France, or Israel will have easier access to journals than those of Vietnam, Chad, and Zimbabwe. Under war conditions, poor countries, like North Vietnam may develop own concepts of medical care. There are X-ray findings which are typical or even characteristic for air warfare, guerrilla warfare, gas war, desert warfare, conventional warfare, and annihilation warfare, and city guerrilla warfare/civil war. The examples demonstrate that weapons and the conditions of transport and treatment can be recognized by X-ray findings. The radiogram can be read like a document. Conclusion: In War, there are differences between a treatment and imaging diagnostic in countries, which control the air space and in those who do not. Medical care of the poor, i.e. in countries (in general those opposing the western nations) will hardly be published, and poverty has no advocate.

  2. Throughput and delay analysis of IEEE 802.15.6-based CSMA/CA protocol.

    Science.gov (United States)

    Ullah, Sana; Chen, Min; Kwak, Kyung Sup

    2012-12-01

    The IEEE 802.15.6 is a new communication standard on Wireless Body Area Network (WBAN) that focuses on a variety of medical, Consumer Electronics (CE) and entertainment applications. In this paper, the throughput and delay performance of the IEEE 802.15.6 is presented. Numerical formulas are derived to determine the maximum throughput and minimum delay limits of the IEEE 802.15.6 for an ideal channel with no transmission errors. These limits are derived for different frequency bands and data rates. Our analysis is validated by extensive simulations using a custom C+ + simulator. Based on analytical and simulation results, useful conclusions are derived for network provisioning and packet size optimization for different applications.

  3. The Analysis of Forming Forces in Single Point Incremental Forming

    Directory of Open Access Journals (Sweden)

    Koh Kyung Hee

    2016-01-01

    Full Text Available Incremental forming is a process to produce sheet metal parts in quick. Because there is no need for dedicated dies and molds, this process is less cost and time spent. The purpose of this study is to investigate forming forces in single point incremental forming. Producing a cone frustum of aluminum is tested for forming forces. A dynamometer is used to collect forming forces and analyze them. These forces are compared with cutting forces upon producing same geometrical shapes of experimental parts. The forming forces in Z direction are 40 times larger than the machining forces. A spindle and its axis of a forming machine should be designed enough to withstand the forming forces.

  4. Mycobacterium tuberculosis L-forms

    OpenAIRE

    2011-01-01

    M. tuberculosis L-forms researches done in China during the recent years were reviewed in this article. M. tuberculosis L-forms could be produced spontaneously or induced by isoniazid or D-cyclic serine, that influenced the synthesis of cell walls. Among the acid-fast organisms isolated from the patients, more L-forms were found than vegetative forms. In extrapulmonary tuberculosis, M. tuberculosis disseminated through the blood mainly in L-forms, L-forms could adhere on the surface or harbor...

  5. Advances in metal forming expert system for metal forming

    CERN Document Server

    Hingole, Rahulkumar Shivajirao

    2015-01-01

    This comprehensive book offers a clear account of the theory and applications of advanced metal forming. It provides a detailed discussion of specific forming processes, such as deep drawing, rolling, bending extrusion and stamping. The author highlights recent developments of metal forming technologies and explains sound, new and powerful expert system techniques for solving advanced engineering problems in metal forming. In addition, the basics of expert systems, their importance and applications to metal forming processes, computer-aided analysis of metalworking processes, formability analysis, mathematical modeling and case studies of individual processes are presented.

  6. Amorphous drugs and dosage forms

    DEFF Research Database (Denmark)

    Grohganz, Holger; Löbmann, K.; Priemel, P.

    2013-01-01

    The transformation to an amorphous form is one of the most promising approaches to address the low solubility of drug compounds, the latter being an increasing challenge in the development of new drug candidates. However, amorphous forms are high energy solids and tend to recry stallize. New form...

  7. Matryoshka of Special Democratic Forms

    CERN Document Server

    Devchand, Chandrashekar; Weingart, Gregor

    2008-01-01

    Special p-forms are forms which have components \\phi_{\\mu_1...\\mu_p} equal to +1,-1 or 0 in some orthonormal basis. A p-form \\phi\\in \\Lambda^p R^d is called democratic if the set of nonzero components {\\phi_{\\mu_1...\\mu_p}} is symmetric under the transitive action of a subgroup of O(d,Z) on the indices {1,...,d}. Knowledge of these symmetry groups allows us to define mappings of special democratic p-forms in d dimensions to special democratic P-forms in D dimensions for successively higher P \\geq p and D \\geq d. In particular, we display a remarkable nested stucture of special forms including a U(3)-invariant 2-form in six dimensions, a G_2-invariant 3-form in seven dimensions, a Spin(7)-invariant 4-form in eight dimensions and a special democratic 6-form \\Omega in ten dimensions. The latter has the remarkable property that its contraction with one of five distinct bivectors, yields, in the orthogonal eight dimensions, the Spin(7)-invariant 4-form. We discuss various properties of this ten dimensional form.

  8. FormLink/FeynCalcFormLink : Embedding FORM in Mathematica and FeynCalc

    CERN Document Server

    Feng, Feng

    2012-01-01

    FORM, a symbolic manipulation system, has been widely used in a lot of calculations for High Energy Physics due to its high performance and fficient design. Mathematica, another computational software program, has also widely been used, but more for reasons of generality and user-friendliness than for speed. Especially calculations involving tensors and noncommutative operations like calculating Dirac traces can be rather slow in Mathematica, compared to FORM. In this article we describe FormLink and FeynCalcFormLink, two Mathematica packages to link Mathematica and FeynCalc with FORM. FormLink can be used without FeynCalc and FeynCalcFormLink, which is an extension loading FormLink and FeynCalc automatically. With these two packages the impressive speed and other special features of FORM get embedded into the generality of Mathematica and FeynCalc in a simple manner. FeynCalcFormLink provides a FORM-based turbo for FeynCalc, making it much more efficient. FormLink turns Mathematica into an editor and code or...

  9. The semantics of biological forms.

    Science.gov (United States)

    Albertazzi, Liliana; Canal, Luisa; Dadam, James; Micciolo, Rocco

    2014-01-01

    This study analyses how certain qualitative perceptual appearances of biological forms are correlated with expressions of natural language. Making use of the Osgood semantic differential, we presented the subjects with 32 drawings of biological forms and a list of 10 pairs of connotative adjectives to be put in correlations with them merely by subjective judgments. The principal components analysis made it possible to group the semantics of forms according to two distinct axes of variability: harmony and dynamicity. Specifically, the nonspiculed, nonholed, and flat forms were perceived as harmonic and static; the rounded ones were harmonic and dynamic. The elongated forms were somewhat disharmonious and somewhat static. The results suggest the existence in the general population of a correspondence between perceptual and semantic processes, and of a nonsymbolic relation between visual forms and their adjectival expressions in natural language.

  10. Temporal form in interaction design

    DEFF Research Database (Denmark)

    Vallgårda, Anna; Winther, Morten Trøstrup; Mørch, Nina;

    2015-01-01

    Interaction design is distinguished from most other design disciplines through its temporal form. Temporal form is the computational structure that enables and demands a temporal expression in the resulting design. Temporal form is what enables poetry. In music, temporal form is the composition...... of tones, pauses, and timbre arranged into harmonies and rhythms. In interaction design it is, for instance, the behaviors of pixels on a screen or the movements in shape-changing interfaces. In this paper we show the power of working explicitly with temporal form in designing computational things. We give...... temporal forms by letting a series of expert designers reflect upon them. We borrow a framework from Boorstin’s film theory in which he distinguishes between the voyeuristic, the vicarious, and the visceral experience. We show how to use rhythms, complexity, gentle or forceful behavior, etc., to create...

  11. Discussion on Form Focused Instruction

    Institute of Scientific and Technical Information of China (English)

    冯滢

    2007-01-01

    The pedagogy of language teaching has moved from one extreme-Grammar Translation Method to the other-Communicative Language Teaching.Today Form Focused Instruction(FFI)has emerged,intending to bring language forms instructionback to the communicative language classroom.Despite of the approval of this new approach,there is a hot dispute on its two types of application:Focus on Form or Focus on FormS.This article briefly analyzes FFI in recent research studies with focus on the choice between the two types of application.The tentative conclusion is FFI does show some explicit and reliable effects on accuracy and error elimination in language teaching;however,the investigation into its application is not simply either Focus on Form Or Focus on FormS,but focuses on the optimal combination of the two in teaching.

  12. Isometric Spacelike Immersions of Space Forms in Indefinite Space Forms

    Institute of Scientific and Technical Information of China (English)

    李海中; 吴岚

    2001-01-01

    Let M be a connected n-dimensional space form spacelike isometrically immersed in a (2n -1)-dimensional indefinite space form. If M is maximal, we prove that either M is totally geodesic or M is apiece of the n-dimensional hyperbolic cylinder in the (2n - 1)-dimensional pseudo-hyperbolic space.``

  13. Forming processes and mechanics of sheet metal forming

    NARCIS (Netherlands)

    Burchitz, I.A.

    2004-01-01

    The report is dealing with the numerical analysis of forming processes. Forming processes is the large group of manufacturing processes used to obtain various product shapes by means of plastic deformations. The report is organized as follows. An overview of the deformation processes and the materia

  14. Laser forming and welding processes

    CERN Document Server

    Yilbas, Bekir Sami; Shuja, Shahzada Zaman

    2013-01-01

    This book introduces model studies and experimental results associated with laser forming and welding such as laser induced bending, welding of sheet metals, and related practical applications. The book provides insight into the physical processes involved with laser forming and welding. The analytical study covers the formulation of laser induced bending while the model study demonstrates the simulation of bending and welding processes using the finite element method. Analytical and numerical solutions for laser forming and welding problems are provided.

  15. Discussion on Form Focused Instruction

    Institute of Scientific and Technical Information of China (English)

    冯滢

    2007-01-01

    The pedagogy of language teaching has moved from one extreme-Grammar Translation Method to the other-Communicative Language Teaching.Today Form Focused Instruction(FFI) has emerged,intending to bring language forms instruction back to the communicative language classroom.Despite of the approval of this new approach,there is a hot dispute on its two types of application:Focus on Form or Focus on FormS.This article briefly analyzes FFI in recent research studies with focus on the choice between the two types ...

  16. Strange nucleon form-factors

    Science.gov (United States)

    Maas, F. E.; Paschke, K. D.

    2017-07-01

    A broad program measuring parity-violation in electron-nuclear scattering has now provided a large set of precision data on the weak-neutral-current form-factors of the proton. Under comparison with well-measured electromagnetic nucleon form-factors, these measurements reveal the role of the strange quark sea on the low-energy interactions of the proton through the strange-quark-flavor vector form-factors. This review will describe the experimental program and the implications of the global data for the strange-quark vector form-factors. We present here a new fit to the world data.

  17. [Pseudotumor form of urinary tuberculosis].

    Science.gov (United States)

    Rabii, Redouane; Moufid, Kamal; Joual, Abdenbi; Maani, Ahmed; Bennani, Saad; el Mrini, Mohamed

    2002-12-01

    Urogenital tuberculosis is an increasingly frequent serious disease. The diagnosis is often delayed due to the marked clinical polymorphism, leading to serious sequelae. The diagnosis of typical forms is easy, but some forms are misleading and can lead to an incorrect diagnosis. The authors report a pseudoneoplastic form of urogenital tuberculosis in a young patient that was initially diagnosed as lymphoma. In the light of this case and a review of the literature, the authors emphasize the diagnostic difficulties of these forms and the treatment modalities.

  18. A compiler for variational forms

    CERN Document Server

    Kirby, Robert C; 10.1145/1163641.1163644

    2011-01-01

    As a key step towards a complete automation of the finite element method, we present a new algorithm for automatic and efficient evaluation of multilinear variational forms. The algorithm has been implemented in the form of a compiler, the FEniCS Form Compiler FFC. We present benchmark results for a series of standard variational forms, including the incompressible Navier-Stokes equations and linear elasticity. The speedup compared to the standard quadrature-based approach is impressive; in some cases the speedup is as large as a factor 1000.

  19. Tectonics: The meaning of form

    DEFF Research Database (Denmark)

    Christiansen, Karl; Brandt, Per Aage

    Tectonics – The meaning of form deals with one of the core topics of architecture: the relationship between form and content. In the world of architecture, form is not only made from brick, glass and wood. Form means something. When a material is processed with sufficient technical skill and insi...... perspectives. You can read the chapters in any order you like – from the beginning, end or the middle. There is no correct order. The project is methodologically inductive: the more essays you read, the broader your knowledge of tectonics get....

  20. System for forming janus particles

    Science.gov (United States)

    Hong, Liang [Midland, MI; Jiang, Shan [Champaign, IL; Granick, Steve [Champaign, IL

    2011-01-25

    The invention is a method of forming Janus particles, that includes forming an emulsion that contains initial particles, a first liquid, and a second liquid; solidifying the first liquid to form a solid that contains at least a portion of the initial particles on a surface of the solid; and treating the exposed particle sides with a first surface modifying agent, to form the Janus particles. Each of the initial particles on the surface has an exposed particle side and a blocked particle side.

  1. INFORMATIONAL EFFECT OF A FORM

    Directory of Open Access Journals (Sweden)

    Kovalenko V.F.

    2016-02-01

    Full Text Available The study was conducted by method of light scattering of laser emission. The influence of the form field, mutual influence of mental informational and form torsional fields as well as the following exposure of water samples in the form field after the cease of informational influence on water structure were examined. Paper forms of a pyramid, a cylinder, and a prism were used. The experimental findings show that mechanism of mutual influence on water structure of the form and informational torsional fields depended on the initial conditions of spin restructuring process – the configuration of a form, the type of the form field (internal and external ones, and the initial water structure. The influence of the form field on informational aftereffect was determined, the character of which was defined by ratio of intensities of torsional form field and an informational soliton. The phenomenon of the abnormally large amplification of the informational aftereffect in the internal field of a pyramid demonstrating the attributes of positive reverse connection between the informational soliton and torsional field of water structure and selection of generated cluster sizes were discovered.

  2. Identification and characterization of CTRP9, a novel secreted glycoprotein, from adipose tissue that reduces serum glucose in mice and forms heterotrimers with adiponectin.

    Science.gov (United States)

    Wong, G William; Krawczyk, Sarah A; Kitidis-Mitrokostas, Claire; Ge, Guangtao; Spooner, Eric; Hug, Christopher; Gimeno, Ruth; Lodish, Harvey F

    2009-01-01

    Adiponectin is a major insulin-sensitizing, multimeric hormone derived from adipose tissue that acts on muscle and liver to regulate whole-body glucose and lipid metabolism. Here, we describe a novel and highly conserved paralog of adiponectin designated as C1q/TNF-related protein (CTRP) 9. Of all the CTRP paralogs, CTRP9 shows the highest degree of amino acid identity to adiponectin in its globular C1q domain. CTRP9 is expressed predominantly in adipose tissue and females expresses higher levels of the transcript than males. Moreover, its expression levels in ob/ob mice changed in an age-dependent manner, with significant up-regulation in younger mice. CTRP9 is a secreted glycoprotein with multiple post-translational modifications in its collagen domain that include hydroxylated prolines and hydroxylated and glycosylated lysines. It is secreted as multimers (predominantly trimers) from transfected cells and circulates in the mouse serum with levels varying according to sex and metabolic state of mice. Furthermore, CTRP9 and adiponectin can be secreted as heterooligomers when cotransfected into mammalian cells, and in vivo, adiponectin/CTRP9 complexes can be reciprocally coimmunoprecipitated from the serum of adiponectin and CTRP9 transgenic mice. Biochemical analysis demonstrates that adiponectin and CTRP9 associate via their globular C1q domain, and this interaction does not require their conserved N-terminal cysteines or their collagen domains. Furthermore, we show that adiponectin and CTRP9 form heterotrimers. In cultured myotubes, CTRP9 specifically activates AMPK, Akt, and p44/42 MAPK signaling pathways. Adenovirus-mediated overexpression of CTRP9 in obese (ob/ob) mice significantly lowered serum glucose levels. Collectively, these results suggest that CTRP9 is a novel adipokine, and further study of CTRP9 will yield novel mechanistic insights into its physiological and metabolic function.

  3. NETWORK CODING BY BEAM FORMING

    DEFF Research Database (Denmark)

    2013-01-01

    Network coding by beam forming in networks, for example, in single frequency networks, can provide aid in increasing spectral efficiency. When network coding by beam forming and user cooperation are combined, spectral efficiency gains may be achieved. According to certain embodiments, a method...... cooperating with the plurality of user equipment to decode the received data....

  4. Another Form for LAMBDA Method

    Institute of Scientific and Technical Information of China (English)

    ZHOU Yangmei; LIU Jingnan

    2003-01-01

    The LAMBDA methodthat was proposed by Teunissen is introduced. Then, on the basis of both the back-sequential conditional LS technique and the upper-triangular Cholesky decomposition, another form for LAMBDA method is proposed.This new form for LAMBDA method has the same principle and calculation speed as the traditional LAMBDA method.

  5. FormTracer - A Mathematica Tracing Package Using FORM

    CERN Document Server

    Cyrol, Anton K; Strodthoff, Nils

    2016-01-01

    We present FormTracer, a high-performance, general purpose, easy-to-use Mathematica tracing package which uses FORM. It supports arbitrary space and spinor dimensions as well as an arbitrary number of simple compact Lie groups. While keeping the usability of the Mathematica interface, it relies on the efficiency of FORM. An additional performance gain is achieved by a decomposition algorithm that avoids redundant traces in the product tensors spaces. FormTracer supports a wide range of syntaxes which endows it with a high flexibility. Mathematica notebooks that automatically install the package and guide the user through performing standard traces in space-time, spinor and gauge-group spaces are provided.

  6. Topics on the FORM software; Topicos do software FORM

    Energy Technology Data Exchange (ETDEWEB)

    Costa Jorge, Patricia M. da; Peres, Patricia Duarte [Universidade Catolica de Petropolis, RJ (Brazil). Dept. de Ciencia da Computacao

    1997-06-01

    These notes studies the compilation with FORM software as applied to high energy physics, covering the following topics: Command structures, statistics and numbers, Dirac matrices, optimization control, Gamma matrices, errors and polynomial substitution

  7. Quantum modular forms, mock modular forms, and partial theta functions

    Science.gov (United States)

    Kimport, Susanna

    Defined by Zagier in 2010, quantum modular forms have been the subject of an explosion of recent research. Many of these results are aimed at discovering examples of these functions, which are defined on the rational numbers and have "nice" modularity properties. Though the subject is in its early stages, numerous results (including Zagier's original examples) show these objects naturally arising from many areas of mathematics as limits of other modular-like functions. One such family of examples is due to Folsom, Ono, and Rhoades, who connected these new objects to partial theta functions (introduced by Rogers in 1917) and mock modular forms (about which there is a rich theory, whose origins date back to Ramanujan in 1920). In this thesis, we build off of the work of Folsom, Ono, and Rhoades by providing an infinite family of quantum modular forms of arbitrary positive half-integral weight. Further, this family of quantum modular forms "glues" mock modular forms to partial theta functions and is constructed from a so-called "universal" mock theta function by extending a method of Eichler and Zagier (originally defined for holomorphic Jacobi forms) into a non-holomorphic setting. In addition to the infinite family, we explore the weight 1/2 and 3/2 functions in more depth. For both of these weights, we are able to explicitly write down the quantum modular form, as well as the corresponding "errors to modularity," which can be shown to be Mordell integrals of specific theta functions and, as a consequence, are real-analytic functions. Finally, we turn our attention to the partial theta functions associated with these low weight examples. Berndt and Kim provide asymptotic expansions for a certain class of partial theta functions as q approaches 1 radially within the unit disk. Here, we extend this work to not only obtain asymptotic expansions for this class of functions as q approaches any root of unity, but also for a certain class of derivatives of these functions

  8. Cold-formed steel design

    CERN Document Server

    Yu, Wei-Wen

    2010-01-01

    The definitive text in the field, thoroughly updated and expanded Hailed by professionals around the world as the definitive text on the subject, Cold-Formed Steel Design is an indispensable resource for all who design for and work with cold-formed steel. No other book provides such exhaustive coverage of both the theory and practice of cold-formed steel construction. Updated and expanded to reflect all the important developments that have occurred in the field over the past decade, this Fourth Edition of the classic text provides you with more of the detailed, up-to-the-minute techni

  9. Nitrogen Forms in Humic Substances

    Institute of Scientific and Technical Information of China (English)

    ZHUOSU-NENG; WENQI-XIAO

    1992-01-01

    In this paper,the nitrogen forms in newly-formed humic substances,including humic acid (HA),fulvic acid (FA) and humic acid in humin (HAI),were studied by using the 15N CP-MAS NMR technique in combination with chemical approaches.Results show that the majority of nitrogen in HA,FA and HAI was in the amide form with some presented as aliphatic and/ or aromatic amines and some as pyrrole type nitrogen,although the contents of nonhydrolyzable nitrogen in them differed greatly from each other (15-55%).

  10. Differential forms theory and practice

    CERN Document Server

    Weintraub, Steven H

    2014-01-01

    Differential forms are utilized as a mathematical technique to help students, researchers, and engineers analyze and interpret problems where abstract spaces and structures are concerned, and when questions of shape, size, and relative positions are involved. Differential Forms has gained high recognition in the mathematical and scientific community as a powerful computational tool in solving research problems and simplifying very abstract problems through mathematical analysis on a computer. Differential Forms, 2nd Edition, is a solid resource for students and professionals needing a solid g

  11. Supergravity actions with integral forms

    Science.gov (United States)

    Castellani, L.; Catenacci, R.; Grassi, P. A.

    2014-12-01

    Integral forms provide a natural and powerful tool for the construction of supergravity actions. They are generalizations of usual differential forms and are needed for a consistent theory of integration on supermanifolds. The group geometrical approach to supergravity and its variational principle are reformulated and clarified in this language. Central in our analysis is the Poincaré dual of a bosonic manifold embedded into a supermanifold. Finally, using integral forms we provide a proof of Gates' so-called "Ectoplasmic Integration Theorem", relating superfield actions to component actions.

  12. Supergravity Actions with Integral Forms

    CERN Document Server

    Castellani, L; Grassi, P A

    2014-01-01

    Integral forms provide a natural and powerful tool for the construction of supergravity actions. They are generalizations of usual differential forms and are needed for a consistent theory of integration on supermanifolds. The group geometrical approach to supergravity and its variational principle are reformulated and clarified in this language. Central in our analysis is the Poincare' dual of a bosonic manifold embedded into a supermanifold. Finally, using integral forms we provide a proof of Gates' so-called "Ectoplasmic Integration Theorem", relating superfield actions to component actions.

  13. Supergravity actions with integral forms

    Directory of Open Access Journals (Sweden)

    L. Castellani

    2014-12-01

    Full Text Available Integral forms provide a natural and powerful tool for the construction of supergravity actions. They are generalizations of usual differential forms and are needed for a consistent theory of integration on supermanifolds. The group geometrical approach to supergravity and its variational principle are reformulated and clarified in this language. Central in our analysis is the Poincaré dual of a bosonic manifold embedded into a supermanifold. Finally, using integral forms we provide a proof of Gates' so-called “Ectoplasmic Integration Theorem”, relating superfield actions to component actions.

  14. Supergravity actions with integral forms

    Energy Technology Data Exchange (ETDEWEB)

    Castellani, L., E-mail: leonardo.castellani@mfn.unipmn.it [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale, Viale T. Michel, 11, 15121 Alessandria (Italy); INFN, Sezione di Torino, via P. Giuria 1, 10125 Torino (Italy); Catenacci, R., E-mail: roberto.catenacci@mfn.unipmn.it [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale, Viale T. Michel, 11, 15121 Alessandria (Italy); Grassi, P.A., E-mail: pietro.grassi@mfn.unipmn.it [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale, Viale T. Michel, 11, 15121 Alessandria (Italy); INFN, Sezione di Torino, via P. Giuria 1, 10125 Torino (Italy)

    2014-12-15

    Integral forms provide a natural and powerful tool for the construction of supergravity actions. They are generalizations of usual differential forms and are needed for a consistent theory of integration on supermanifolds. The group geometrical approach to supergravity and its variational principle are reformulated and clarified in this language. Central in our analysis is the Poincaré dual of a bosonic manifold embedded into a supermanifold. Finally, using integral forms we provide a proof of Gates' so-called “Ectoplasmic Integration Theorem”, relating superfield actions to component actions.

  15. Multiple forming tools in incremental forming - Influence of the forming strategies on sheet contour

    Science.gov (United States)

    Dang, T.; Tebaay, L. M.; Gies, S.; Tekkaya, A. E.

    2016-10-01

    Single point incremental forming (SPIF) is a well known process which is used for rapid prototyping or for small-quantity production. The feature of this process is the flexible manufacturing of complex hollow shapes with the use of basic equipments. However, this forming process takes very long time. To speed up the process time, multiple forming tools can be used simultaneously. This paper presents the influence of the multiple tools in SPIF on the formed shape. The conventional SPIF with a single tool is taken into account for a comparative analysis. The results in this study showed that the tool arrangements and its distance have a significant effect on the geometrical accuracy. Moreover, it is shown the influence between the vertical step size of the tool and the strain distributions. This knowledge can be used for generation of new forming strategies.

  16. Not All G-Quadruplexes are Created Equally: An Investigation of the Structural Polymorphism of the c-Myc G-Quadruplex-Forming Sequence and its Interaction with the Porphyrin meso-Tetra(N-methyl-4-pyridyl)porphine

    Science.gov (United States)

    Le, Huy T.; Miller, M. Clarke; Buscaglia, Robert; Dean, William L.; Holt, Patrick A.; Chaires, Jonathan B.; Trent, John O.

    2012-01-01

    G-quadruplexes, DNA tertiary structures highly localized to functionally important sites within the human genome, have emerged as important new drug targets. The putative G-quadruplex-forming sequence (Pu27) in the NHE-III1 promoter region of the c-Myc gene is of particular interest as stabilization of this G-quadruplex with TMPyP4 has been shown to repress c-Myc transcription. In this study, we examine the Pu27 G-quadruplex-forming sequence and its interaction with TMPyP4. We report that the Pu27 sequence exists as a heterogeneous mixture of monomeric and higher-order G-quadruplex species in vitro and that this mixture can be partially resolved by size exclusion chromatography (SEC) separation. Within this ensemble of configurations, the equilibrium can be altered by modifying the buffer composition, annealing procedure, and dialysis protocol thereby affecting the distribution of G-quadruplex species formed. TMPyP4 was found to bind preferentially to higher-order G-quadruplex species suggesting the possibility of stabilization of the junctions of the c-Myc G-quadruplex multimers by porphyrin end-stacking. We also examined four modified c-Myc sequences that have been previously reported and found a narrower distribution of quadruplex configurations compared to the parent Pu27 sequence. We could not definitively conclude whether these G-quadruplex structures were selected from the original ensemble or if they are new G-quadruplex structures. Since these sequences differ considerably from the wild-type promoter sequence, it is unclear whether their structures have any actual biological relevance. Additional studies are needed to examine how the polymorphic nature of G-quadruplexes affects the interpretation of in vitro data for c-Myc and other G-quadruplexes. The findings reported here demonstrate that experimental conditions contribute significantly to G-quadruplex formation and should be carefully considered, controlled, and reported in detail. PMID:23108607

  17. Fields and Forms on -Algebras

    Indian Academy of Sciences (India)

    Cătălin Ciupală

    2005-02-01

    In this paper we introduce non-commutative fields and forms on a new kind of non-commutative algebras: -algebras. We also define the Frölicher–Nijenhuis bracket in the non-commutative geometry on -algebras.

  18. Distances to star forming regions

    CERN Document Server

    Loinard, Laurent

    2014-01-01

    The determination of accurate distances to star-forming regions are discussed in the broader historical context of astronomical distance measurements. We summarize recent results for regions within 1 kpc and present perspectives for the near and more distance future.

  19. Movement in aesthetic form creation

    DEFF Research Database (Denmark)

    Thomsen, Bente Dahl

    2015-01-01

    This paper presents the good practice based experiences found when movement is used to strengthen form creation and to create flow in the process of artistic education. Faced with the design engineering students’ problems with creating forms with aesthetic statements, the experiences with movement...... inspired the thesis that the design engineers’ training in aesthetic form creation can be improved by integrating the movement potential into their education. The paper documents the on-going work on developing a model for embodied creation of form called ‘Somatechne model’. The study also identifies...... a lens to assess the students’ development of mind-body skills, known as ‘The Three Soma’. The Somatechne model also helps to identify the activity that gives the students the opportunity to develop their sensibility and thus aesthetic attention....

  20. Detection of Life Forms Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Gaia Genomics proposes to develop an instrument for the detection of earthborn and/or planetary life forms that are based on a nucleic acid paradigm. Highly...

  1. BILINEAR FORMS AND LINEAR CODES

    Institute of Scientific and Technical Information of China (English)

    高莹

    2004-01-01

    Abraham Lempel et al[1] made a connection between linear codes and systems of bilinear forms over finite fields. In this correspondence, a new simple proof of a theorem in [1] is presented; in addition, the encoding process and the decoding procedure of RS codes are simplified via circulant matrices. Finally, the results show that the correspondence between bilinear forms and linear codes is not unique.

  2. Methods of forming CIGS films

    Energy Technology Data Exchange (ETDEWEB)

    Mansfield, Lorelle; Ramanathan, Kannan

    2017-09-19

    Methods for forming CIGS films are provided. According to an aspect of the invention, a method of forming a CIGS film includes a precursor step, which includes simultaneously evaporating Cu, In, Ga, Se, and Sb onto a substrate. The Se is incident on the substrate at a rate of at least 20 .ANG./s. The method also includes a selenization step, which includes evaporating Se over the substrate after the precursor step.

  3. Virksomhedens formål

    DEFF Research Database (Denmark)

    Thomsen, Steen

    2009-01-01

    Formålsdiskussionen hører naturligt sammen med overvejelser om virksomhedens identitet og mission. Hvem er vi? Hvad er vores eksistensberettigelse? Hvad er det, vi kan, som andre ikke kan?......Formålsdiskussionen hører naturligt sammen med overvejelser om virksomhedens identitet og mission. Hvem er vi? Hvad er vores eksistensberettigelse? Hvad er det, vi kan, som andre ikke kan?...

  4. Forms of Approximate Radiation Transport

    CERN Document Server

    Brunner, G

    2002-01-01

    Photon radiation transport is described by the Boltzmann equation. Because this equation is difficult to solve, many different approximate forms have been implemented in computer codes. Several of the most common approximations are reviewed, and test problems illustrate the characteristics of each of the approximations. This document is designed as a tutorial so that code users can make an educated choice about which form of approximate radiation transport to use for their particular simulation.

  5. Mechanics of Forming Ring Disks

    Directory of Open Access Journals (Sweden)

    Avakyan R.M.

    2010-12-01

    Full Text Available The analysis of forming ring disk of constant thickness in conditions of large plastic deformations taking into account the interconnected change of effective strain and deformation hardening is carried out. The analytical dependences characterizing the relative size of plastic area are obtained. The interrelation between the initial and final form of a product is established at maximum possible size of internal pressure.

  6. Terra firma-forme dermatosis

    OpenAIRE

    2013-01-01

    Terra firma-forme dermatosis is characterized by ′dirty′ brown-grey cutaneous patches and plaques that can simply be eradicated by forceful swabbing with alcohol pads. The pathogenesis has been attributed to abnormal and delayed keratinization. Although affected patients present with typical lesions, the disorder is not well-known by dermatologists. In this report, we describe two patients with terra firma-forme dermatosis in the setting of xerosis cutis and atopic dermatitis. From a clinical...

  7. Oxidized Form of Creatine Kinase

    Institute of Scientific and Technical Information of China (English)

    王希成; 王帆; 邹晓明; 周海梦

    1994-01-01

    The purified rabbit muscle creatine kinase (R-CK) was previously considered homogeneousand without disulfide bonds.By the method of NR/R two-dimensional diagonal SDS-PAGE,two forms of R-CK,designated respectively "oxidized form" of creatine kinase which contained intrachain disulfide bondsand "reduced form" of creatine kinase which did not have any —S—S— bridges,were for the first time sepa-rated.They were found to be the same in amino acid composition,in subunit molecular Weight and in isoelec-tric point,and were almost identical in enzyme activities.Thus it is hard to isolate one from the other bycommon biochemical methods.More extensive studies show that the oxidized form of CK also contains a pair of reactive thiol groupswhich are essential to the enzyme activity,and it has one intrachain disulfide bond per subunit.In the nativestate,this —S—S— bond cannot be reduced by DTT,but by treating the reduced form of CK with some ox-idants,these —S—S— bonds can be formed in vitro.Thus it is presumed that the disulfide bonds are cross-linked through the oxidization of two shallowly buried —SH groups.

  8. Conjoint Forming - Technologies for Simultaneous Forming and Joining

    Science.gov (United States)

    Groche, P.; Wohletz, S.; Mann, A.; Krech, M.; Monnerjahn, V.

    2016-03-01

    The market demand for new products optimized for e. g. lightweight applications or smart components leads to new challenges in production engineering. Hybrid structures represent one promising approach. They aim at higher product performance by using a suitable combination of different materials. The developments of hybrid structures stimulate the research on joining of dissimilar materials. Since they allow for joining dissimilar materials without external heating technologies based on joining by plastic deformation seem to be of special attractiveness. The paper at hand discusses the conjoint forming approach. This approach combines forming and joining in one process. Two or more workpieces are joined while at least one workpiece is plastically deformed. After presenting the fundamental joining mechanisms, the conjoint forming approach is discussed comprehensively. Examples of conjoint processes demonstrate the effectiveness and reveal the underlying phenomena.

  9. TRASYS form factor matrix normalization

    Science.gov (United States)

    Tsuyuki, Glenn T.

    1992-01-01

    A method has been developed for adjusting a TRASYS enclosure form factor matrix to unity. This approach is not limited to closed geometries, and in fact, it is primarily intended for use with open geometries. The purpose of this approach is to prevent optimistic form factors to space. In this method, nodal form factor sums are calculated within 0.05 of unity using TRASYS, although deviations as large as 0.10 may be acceptable, and then, a process is employed to distribute the difference amongst the nodes. A specific example has been analyzed with this method, and a comparison was performed with a standard approach for calculating radiation conductors. In this comparison, hot and cold case temperatures were determined. Exterior nodes exhibited temperature differences as large as 7 C and 3 C for the hot and cold cases, respectively when compared with the standard approach, while interior nodes demonstrated temperature differences from 0 C to 5 C. These results indicate that temperature predictions can be artificially biased if the form factor computation error is lumped into the individual form factors to space.

  10. Form und Sinn: Sprachwissenschaftliche Betrachtungen (Form and Meaning: Linguistic Observations).

    Science.gov (United States)

    Jakobson, Roman

    This collection of 14 papers and articles by Roman Jakobson contains works written and published between 1931 and 1970 which deal either with global aspects of language or with specific grammatical issues. The collection emphasizes Jakobson's concern for finding the links between form and meaning in language. The text is entirely in German with…

  11. Sixth-Form Colleges: An Endangered Organisational Form?

    Science.gov (United States)

    Stoten, David William

    2014-01-01

    The sixth-form college sector is often marginalised in policy and academic discourse, where the much larger school and further education sectors dominate. This paper sets out to describe the sector's key features, assess its position within the wider education system and consider its future in an increasingly competitive education market. The…

  12. Pre-exposure to moving form enhances static form sensitivity.

    Directory of Open Access Journals (Sweden)

    Thomas S A Wallis

    Full Text Available BACKGROUND: Motion-defined form can seem to persist briefly after motion ceases, before seeming to gradually disappear into the background. Here we investigate if this subjective persistence reflects a signal capable of improving objective measures of sensitivity to static form. METHODOLOGY/PRINCIPAL FINDINGS: We presented a sinusoidal modulation of luminance, masked by a background noise pattern. The sinusoidal luminance modulation was usually subjectively invisible when static, but visible when moving. We found that drifting then stopping the waveform resulted in a transient subjective persistence of the waveform in the static display. Observers' objective sensitivity to the position of the static waveform was also improved after viewing moving waveforms, compared to viewing static waveforms for a matched duration. This facilitation did not occur simply because movement provided more perspectives of the waveform, since performance following pre-exposure to scrambled animations did not match that following pre-exposure to smooth motion. Observers did not simply remember waveform positions at motion offset, since removing the waveform before testing reduced performance. CONCLUSIONS/SIGNIFICANCE: Motion processing therefore interacts with subsequent static visual inputs in a way that can improve performance in objective sensitivity measures. We suggest that the brief subjective persistence of motion-defined forms that can occur after motion offsets is a consequence of the decay of a static form signal that has been transiently enhanced by motion processing.

  13. Form und Sinn: Sprachwissenschaftliche Betrachtungen (Form and Meaning: Linguistic Observations).

    Science.gov (United States)

    Jakobson, Roman

    This collection of 14 papers and articles by Roman Jakobson contains works written and published between 1931 and 1970 which deal either with global aspects of language or with specific grammatical issues. The collection emphasizes Jakobson's concern for finding the links between form and meaning in language. The text is entirely in German with…

  14. Amorphous drugs and dosage forms

    DEFF Research Database (Denmark)

    Grohganz, Holger; Löbmann, K.; Priemel, P.

    2013-01-01

    The transformation to an amorphous form is one of the most promising approaches to address the low solubility of drug compounds, the latter being an increasing challenge in the development of new drug candidates. However, amorphous forms are high energy solids and tend to recry stallize. New...... formulation principles are needed to ensure the stability of amorphous drug forms. The formation of solid dispersions is still the most investigated approach, but additional approaches are desirable to overcome the shortcomings of solid dispersions. Spatial separation by either coating or the use of micro......-containers has shown potential to prevent or delay recrystallization. Another recent approach is the formation of co-amorphous mixtures between either two drugs or one drug and one low molecular weight excipient. Molecular interactions between the two molecules provide an energy barrier that has to be overcome...

  15. Methods of forming boron nitride

    Science.gov (United States)

    Trowbridge, Tammy L; Wertsching, Alan K; Pinhero, Patrick J; Crandall, David L

    2015-03-03

    A method of forming a boron nitride. The method comprises contacting a metal article with a monomeric boron-nitrogen compound and converting the monomeric boron-nitrogen compound to a boron nitride. The boron nitride is formed on the same or a different metal article. The monomeric boron-nitrogen compound is borazine, cycloborazane, trimethylcycloborazane, polyborazylene, B-vinylborazine, poly(B-vinylborazine), or combinations thereof. The monomeric boron-nitrogen compound is polymerized to form the boron nitride by exposure to a temperature greater than approximately 100.degree. C. The boron nitride is amorphous boron nitride, hexagonal boron nitride, rhombohedral boron nitride, turbostratic boron nitride, wurzite boron nitride, combinations thereof, or boron nitride and carbon. A method of conditioning a ballistic weapon and a metal article coated with the monomeric boron-nitrogen compound are also disclosed.

  16. Methods of forming boron nitride

    Energy Technology Data Exchange (ETDEWEB)

    Trowbridge, Tammy L; Wertsching, Alan K; Pinhero, Patrick J; Crandall, David L

    2015-03-03

    A method of forming a boron nitride. The method comprises contacting a metal article with a monomeric boron-nitrogen compound and converting the monomeric boron-nitrogen compound to a boron nitride. The boron nitride is formed on the same or a different metal article. The monomeric boron-nitrogen compound is borazine, cycloborazane, trimethylcycloborazane, polyborazylene, B-vinylborazine, poly(B-vinylborazine), or combinations thereof. The monomeric boron-nitrogen compound is polymerized to form the boron nitride by exposure to a temperature greater than approximately 100.degree. C. The boron nitride is amorphous boron nitride, hexagonal boron nitride, rhombohedral boron nitride, turbostratic boron nitride, wurzite boron nitride, combinations thereof, or boron nitride and carbon. A method of conditioning a ballistic weapon and a metal article coated with the monomeric boron-nitrogen compound are also disclosed.

  17. Emerging Forms of Cultural Capital

    DEFF Research Database (Denmark)

    Prieur, Annick; Savage, Mike

    or preferences can be demonstrated, and how the move can be made from observing structured oppositions in cultural consumptions to claims about the existence of cultural capital? We note that current research frequently lack a clear argument about how the cultural forms possessed by the culturally privileged...... Distinction about the significance and content of emerging forms of cultural capital in different Western societies. Among the claims to be discussed are the following: - the claim about a decline in the adherence to traditional highbrow or classic high culture - the claim about increased omnivorousness and...... - the claims that there are forms of emotional, subcultural or national cultural capital at work - The claim about cosmopolitanism or an international orientation as a distinctive feature of the culturally privileged classes The paper responds to the first theme announced in the call for this conference...

  18. Induction interview form in EDH

    CERN Document Server

    Information technology Department, AIS (Administrative Information Services) Group

    2007-01-01

    As part of the efforts to rationalise administrative procedures, the IT and HR Departments have developed a new EDH form for induction interviews, which can be accessed using the link below. In accordance with Administrative Circular No. 2 ('Recruitment, Appointment and possible developments regarding the contractual position of Staff Members', Rev. 3), the work and training objectives to be achieved during the probation period shall be specified in writing to all new staff members during an induction interview. The interview shall take place between the new staff member and his supervisor within six weeks of his taking up his duties at the latest. https://edh.cern.ch/Document/MAPS/Induction1) (or from the EDH desktop, by clicking on 'Other Tasks' and going to the 'HR & Training' heading) Please note that this form is to be used exclusively for new staff members. A separate EDH form will be developed for fellows.Information technology Department, AIS (Administrative Information Services) Group Human Re...

  19. Induction interview form in EDH

    CERN Document Server

    Information technology Department, AIS (Administrative Information Services) Group,

    2007-01-01

    As part of the efforts to rationalise administrative procedures, the IT and HR Departments have developed a new EDH form for induction interviews, which can be accessed using the link below. In accordance with Administrative Circular No. 2 ('Recruitment, Appointment and possible developments regarding the contractual position of Staff Members', Rev. 3), the work and training objectives to be achieved during the probation period shall be specified in writing to all new staff members during an induction interview. The interview shall take place between the new staff member and his supervisor within six weeks of him taking up his duties at the latest. https://edh.cern.ch/Document/MAPS/Induction (or from the EDH desktop, by clicking on 'Other Tasks' and going to the 'HR & Training' heading) Please note that this form is to be used exclusively for new staff members. A separate EDH form will be developed for fellows. Information technology Department, AIS (Administrative Information Services) Group Human...

  20. Method of forming structural heliostat

    Science.gov (United States)

    Anderson, Alfred J.

    1984-06-26

    In forming a heliostat having a main support structure and pivoting and tilting motors and gears and a mirror module for reflecting solar energy onto a collector, the improvement characterized by a method of forming the mirror module in which the mirror is laid upon a solid rigid supporting bed in one or more sections, with or without focusing; a mirror backing sheet is applied by first applying respective thin layers of silicone grease and, thereafter, progressively rolling application to eliminate air bubbles; followed by affixing of a substrate assembly to the mirror backing sheet to form a mirror module that does not curve because of thermally induced stresses and differential thermal expansion or contraction effects. The silicone grease also serves to dampen fluttering of the mirror and protect the mirror backside against adverse effects of the weather. Also disclosed are specific details of preferred embodiments.

  1. New directions in Dirichlet forms

    CERN Document Server

    Jost, Jürgen; Mosco, Umberto; Rockner, Michael; Sturm, Karl-Theodor

    1998-01-01

    The theory of Dirichlet forms brings together methods and insights from the calculus of variations, stochastic analysis, partial differential and difference equations, potential theory, Riemannian geometry and more. This book features contributions by leading experts and provides up-to-date, authoritative accounts on exciting developments in the field and on new research perspectives. Topics covered include the following: stochastic analysis on configuration spaces, specifically a mathematically rigorous approach to the stochastic dynamics of Gibbs measures and infinite interacting particle systems; subelliptic PDE, homogenization, and fractals; geometric aspects of Dirichlet forms on metric spaces and function theory on such spaces; generalized harmonic maps as nonlinear analogues of Dirichlet forms, with an emphasis on non-locally compact situations; and a stochastic approach based on Brownian motion to harmonic maps and their regularity. Various new connections between the topics are featured, and it is de...

  2. Auxin biosynthesis and storage forms.

    Science.gov (United States)

    Korasick, David A; Enders, Tara A; Strader, Lucia C

    2013-06-01

    The plant hormone auxin drives plant growth and morphogenesis. The levels and distribution of the active auxin indole-3-acetic acid (IAA) are tightly controlled through synthesis, inactivation, and transport. Many auxin precursors and modified auxin forms, used to regulate auxin homeostasis, have been identified; however, very little is known about the integration of multiple auxin biosynthesis and inactivation pathways. This review discusses the many ways auxin levels are regulated through biosynthesis, storage forms, and inactivation, and the potential roles modified auxins play in regulating the bioactive pool of auxin to affect plant growth and development.

  3. $K_{13}$ transition form factors

    CERN Document Server

    Chueng Ryong Ji

    2001-01-01

    The rainbow truncation of the quark Dyson-Schwinger equation is combined with the ladder Bethe-Salpeter equation for the meson bound state amplitudes and the dressed quark-W vertex in a manifestly covariant calculation of the K/sub l3/ transition form factors and decay width in the impulse approximation. With model gluon parameters previously fixed by the chiral condensate, the pion mass and decay constant, and the kaon mass, our results for the K/sub l3/ form factors and the kaon semileptonic decay width are in good agreement with the experimental data. (37 refs).

  4. Language, Culture and Symbolic Forms

    OpenAIRE

    Theis, Wolfgang

    2010-01-01

    As Ernst Cassierer introduced in his “Philosophie der symbolischen Formen” in 1923, he specifically mentioned “language” as well as a way of symbolic forms. In 1991, the self declared “researcher on human sciences”, Norbert Elias, published his work called “The Symbol Theory” where he mainly writes about language as an application of symbolic forms and symbols. Elias does not make any reference to Cassirer at all, but states that languages are a part of a civilization process and part of cult...

  5. Metallurgical Characterization of Superplastic Forming

    Science.gov (United States)

    1980-09-01

    The trans - formation of constant-crosshead-speed stress-strain curves into constant-strain- rate curves is clearly not satisfactory because it is based...MILL-ANNEALED AND SUPERPLASTICALLY- FORMED CONDITIONS; FORMING TEMPERATURE - 949EPC (17400F). 01"tln Stoi rte yeld grasa Ultimate l to oret~lSri as...1975), p. 163. 7. G. Rai and N. J. Grant, "On the Measurermients of Superplasticity in an Al-Cu Alloy," Met. Trans . 6A, 385 (1975). 8. A. K, Mukherjee

  6. Differential forms on electromagnetic networks

    CERN Document Server

    Balasubramanian, N V; Sen Gupta, D P

    2013-01-01

    Differential Forms on Electromagnetic Networks deals with the use of combinatorial techniques in electrical circuit, machine analysis, and the relationship between circuit quantities and electromagnetic fields. The monograph is also an introduction to the organization of field equations by the methods of differential forms. The book covers topics such as algebraic structural relations in an electric circuit; mesh and node-pair analysis; exterior differential structures; generalized Stoke's theorem and tensor analysis; and Maxwell's electromagnetic equation. Also covered in the book are the app

  7. 75 FR 26782 - Agency Information Collection Activities: Form I-864, Form I-864A, Form I-864EZ, and Form I-864W...

    Science.gov (United States)

    2010-05-12

    ... Agency Information Collection Activities: Form I-864, Form I- 864A, Form I-864EZ, and Form I-864W... Collection Under Review; Form I- 864, Affidavit of Support Under Section 213A of the Act; Form I-864A, Contract Between Sponsor and Household Member, Form I-864EZ, Affidavit of Support Under Section 213A of...

  8. Terrestrial Planets Formation around Circumbinary Habitable Zone: Inward Migration in the Planetesimal Swarm

    CERN Document Server

    Gong, Yan-Xiang; Xie, Ji-Wei

    2012-01-01

    According to the core accretion theory, circumbinary embryos can form only beyond a critical semimajor axis (CSMA). However, due to the relatively high density of solid materials in the inner disk, significant amount of small planetesimals must exist in the inner zone when embryos were forming outside this CSMA. So embryos migration induced by the planetesimal swarm is possible after the gas disk depletion. Through numerical simulations, we found (i) the scattering-driven inward migration of embryos is robust, planets can form in the habitable zone if we adopt a mass distribution of MMSN-like disk; (ii) the total mass of the planetesimals in the inner region and continuous embryo-embryo scattering are two key factors that cause significant embryo migrations; (iii) the scattering-driven migration of embryos is a natural water-deliver mechanism. We propose that planet detections should focus on the close binary with its habitable zone near CSMA.

  9. Free Form Technology from Delft

    NARCIS (Netherlands)

    Eekhout, A.J.C.M.; Van Gelder, B.L.; Lockefeer, W.A.A.M.; Veltkamp, M.; Vollers, K.J.

    2016-01-01

    The success of the Guggenheim Museum in Bilbao, designed and engineered by Frank O. Gehry and inaugurated in 1997, opened the eyes of the world to the plastic possibilities of Free Form Design. That is, on the side of architects and their admiring clients. Some architects draw up complicated but sur

  10. Temporal form in interaction design

    DEFF Research Database (Denmark)

    Vallgårda, Anna; Winther, Morten Trøstrup; Mørch, Nina;

    2015-01-01

    a nuanced account of what temporal form is in interaction design, and we look at related work synthesizing what we already know of the temporal concerns in interaction design and HCI. In the second part we present a design experiment through which we explore the experiential qualities of a set of 11 simple...

  11. Technetium Immobilization Forms Literature Survey

    Energy Technology Data Exchange (ETDEWEB)

    Westsik, Joseph H.; Cantrell, Kirk J.; Serne, R. Jeffrey; Qafoku, Nikolla

    2014-05-01

    Of the many radionuclides and contaminants in the tank wastes stored at the Hanford site, technetium-99 (99Tc) is one of the most challenging to effectively immobilize in a waste form for ultimate disposal. Within the Hanford Tank Waste Treatment and Immobilization Plant (WTP), the Tc will partition between both the high-level waste (HLW) and low-activity waste (LAW) fractions of the tank waste. The HLW fraction will be converted to a glass waste form in the HLW vitrification facility and the LAW fraction will be converted to another glass waste form in the LAW vitrification facility. In both vitrification facilities, the Tc is incorporated into the glass waste form but a significant fraction of the Tc volatilizes at the high glass-melting temperatures and is captured in the off-gas treatment systems at both facilities. The aqueous off-gas condensate solution containing the volatilized Tc is recycled and is added to the LAW glass melter feed. This recycle process is effective in increasing the loading of Tc in the LAW glass but it also disproportionally increases the sulfur and halides in the LAW melter feed which increases both the amount of LAW glass and either the duration of the LAW vitrification mission or the required supplemental LAW treatment capacity.

  12. Education fees – New forms

    CERN Multimedia

    2015-01-01

    The application forms for the payment of education fees have been updated and are now available in the Admin e-guide (under the “Useful Documents” heading):   Payment of education fees (including language course fees) – AC12A (form to be used by staff members recruited before 1 January 2007, with the exception of former “local staff”).   Payment of education fees – AC12B (form to be used by staff members recruited on or after 1 January 2007, by fellows, scientific associates and guest professors and by former “local staff” whose contracts started before 1 January 2007). The Education Fees service will continue to accept the old forms until the end of the current academic year, i.e. until 31 August 2015. Members of the personnel are reminded that any false declaration or failure to declare information with a view to deceiving others or achieving a gain that would result in a financial loss for CERN or...

  13. Temporal form in interaction design

    DEFF Research Database (Denmark)

    Vallgårda, Anna; Winther, Morten Trøstrup; Mørch, Nina

    2015-01-01

    of tones, pauses, and timbre arranged into harmonies and rhythms. In interaction design it is, for instance, the behaviors of pixels on a screen or the movements in shape-changing interfaces. In this paper we show the power of working explicitly with temporal form in designing computational things. We give...

  14. Application of Incremental Sheet Forming

    Directory of Open Access Journals (Sweden)

    Karbowski Krzysztof

    2015-12-01

    Full Text Available This paper describes some manufacturing aspects and an example of application of the Incremental Sheet Forming (ISF technology which was used for production of the craniofacial prosthesis. The brief description of prosthesis designing was presented as well. The main topic of the paper is comparison of milling and ISF technologies for preparing the tools for prosthesis thermoforming.

  15. Multiplicative forms and Spencer operators

    NARCIS (Netherlands)

    Crainic, Marius; Salazar Pinzon, Maria; Struchiner, Ivan

    2014-01-01

    Motivated by our attempt to recast Cartan’s work on Lie pseudogroups in a more global and modern language, we are brought back to the question of understanding the linearization of multiplicative forms on groupoids and the corresponding integrability problem. From this point of view, the novelty of

  16. Spin-forming Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Switzner, Nathan; Henry, Dick

    2009-03-20

    In a second development order, spin-forming equipment was again evaluated using the test shape, a hemispherical shell. In this second development order, pure vanadium and alloy titanium (Ti-6Al-4V) were spin-formed, as well as additional copper and 21-6-9 stainless. In the first development order the following materials had been spin-formed: copper (alloy C11000 ETP), 6061 aluminum, 304L stainless steel, 21-6-9 stainless steel, and tantalum-2.5% tungsten. Significant challenges included properly adjusting the rotations-per-minute (RPM), cracking at un-beveled edges and laser marks, redressing of notches, surface cracking, non-uniform temperature evolution in the titanium, and cracking of the tailstock. Lessons learned were that 300 RPM worked better than 600 RPM for most materials (at the feed rate of 800 mm/min); beveling the edges to lower the stress reduces edge cracking; notches, laser marks, or edge defects in the preform doom the process to cracking and failure; coolant is required for vanadium spin-forming; increasing the number of passes to nine or more eliminates surface cracking for vanadium; titanium develops a hot zone in front of the rollers; and the tailstock should be redesigned to eliminate the cylindrical stress concentrator in the center.

  17. Polynomial Algebra in Form 4

    Science.gov (United States)

    Kuipers, J.

    2012-06-01

    New features of the symbolic algebra package Form 4 are discussed. Most importantly, these features include polynomial factorization and polynomial gcd computation. Examples of their use are shown. One of them is an exact version of Mincer which gives answers in terms of rational polynomials and 5 master integrals.

  18. English Pidgins: Form and Function.

    Science.gov (United States)

    Mufwene, Salikoko S.

    1988-01-01

    Highlights similarities and variation in both form and function of English pidgins the world over. It is argued that English pidgins are related more by socio-historical conditions and directions of development than by details of their formal structure. Reference list includes 68 citations. (Author/DJD)

  19. Green Lubricants for Metal Forming

    DEFF Research Database (Denmark)

    Bay, Niels

    2010-01-01

    The increasing focus on legislation towards diminishing the impact on working environment as well as external environment has driven efforts to develop new, environmentally benign lubricants for metal forming. The present paper gives an overview of these efforts to substitute environmentally haza...

  20. PIC Reading Readiness Test Form.

    Science.gov (United States)

    Short, N. J.

    This rating form concerns the measurement of basic skills in connection with assessing reading readiness. Motor skills, ability to adjust to learning situations, familiarity with the alphabet, and general knowledge are assessed. See TM 001 111 for details of the Regional PIC program in which it is used. (DLG)

  1. Forms representing forms and linear spaces on hypersurfaces

    CERN Document Server

    Brandes, Julia

    2012-01-01

    A generalisation of Waring's problem, considered first by Arkhipov and Karatsuba, is the question of representing not an integer, but a given polynomial, as a sum of powers of linear polynomials. We investigate a related problem and prove a Hasse principle for the number of identical representations of a set of given forms by homogeneous polynomials of general shape. The result leads to sizeable improvements for estimates of the number of linear spaces on the intersection of hypersurfaces.

  2. Conserved C272/278 in b domain regulate the function of PDI-P5 to make lysozymes trypsin-resistant forms via significant intermolecular disulfide cross-linking.

    Science.gov (United States)

    Miyakawa, Miho; Zukeran, Gosuke; Wada, Yuko; Akama, Kuniko

    2015-05-01

    Protein disulfide isomerase-P5 (P5) is thought to have important functions as an oxidoreductase, however, molecular functions of P5 have not been fully elucidated. We have reported that P5 has insulin reductase activity and inhibits lysozyme refolding by formation of lysozyme multimers with hypermolecular mass inactivated by intermolecular disulfides (hyLYS) in oxidative refolding of reduced denatured lysozyme. To explore the role of each domain of P5, we investigated the effects of domain deletion and Cys-Ala mutants of P5 on insulin reduction and the oxidative refolding of the lysozyme. The mutants of catalytic cysteines, C36/39A, C171/174A, and C36/39/171/174A inhibited the lysozyme refolding almost similarly to P5, and even b domain without catalytic cysteines showed moderate inhibitory effect, suggesting that the b domain played a key role in the inhibition. Western blotting analysis of the refolding products indicated that the catalytic cysteines in both the a and a' domains cross-linked lysozyme comparably to form hyLYS resistant to trypsin, in which b domain was suggested to capture lysozyme for the significant sulfhydryl oxidation. The mutant of the conserved cysteines in b domain, C272/278A, did not form hyLYS, however, showed predominant reductase activity, implying that P5 functioned as a potent sulfhydryl oxidase and a predominant reductase depending on the circumstance around C272/278. These results provide new insight into the molecular basis of P5 function.

  3. Unsplit bipolar pulse forming line

    Science.gov (United States)

    Rhodes, Mark A.

    2011-05-24

    A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  4. Terra firma-forme dermatosis

    Directory of Open Access Journals (Sweden)

    Emel Erkek

    2012-01-01

    Full Text Available Terra firma-forme dermatosis is characterized by ′dirty′ brown-grey cutaneous patches and plaques that can simply be eradicated by forceful swabbing with alcohol pads. The pathogenesis has been attributed to abnormal and delayed keratinization. Although affected patients present with typical lesions, the disorder is not well-known by dermatologists. In this report, we describe two patients with terra firma-forme dermatosis in the setting of xerosis cutis and atopic dermatitis. From a clinical point of view, we lay emphasis on its unique expression and diagnosis/treatment. From a histological perspective, we highlight its resemblance to dermatosis neglecta and speculate on the role of ′neglect′ in a patient with seemingly adequate hygiene. The role of urea containing emollients in the development of this disorder remains to be determined.

  5. Free-form illumination optics

    Science.gov (United States)

    Mohedano, Rubén; Chaves, Julio; Hernández, Maikel

    2016-04-01

    In many illumination problems, the beam pattern needed and/or some geometrical constraints lead to very asymmetric design conditions. These asymmetries have been solved in the past by means of arrangements of rotationally symmetric or linear lamps aimed in different directions whose patterns overlap to provide the asymmetric prescriptions or by splitting one single lamp into several sections, each one providing a part of the pattern. The development of new design methods yielding smooth continuous free-form optical surfaces to solve these challenging design problems, combined with the proper CAD modeling tools plus the development of multiple axes diamond turn machines, give birth to a new generation of optics. These are able to offer the performance and other advanced features, such as efficiency, compactness, or aesthetical advantages, and can be manufactured at low cost by injection molding. This paper presents two examples of devices with free-form optical surfaces, a camera flash, and a car headlamp.

  6. Form Factors of Few-Body Systems: Point Form Versus Front Form

    CERN Document Server

    Gómez-Rocha, Maria; Schweiger, Wolfgang

    2011-01-01

    We present a relativistic point-form approach for the calculation of electroweak form factors of few-body bound states that leads to results which resemble those obtained within the covariant light-front formalism of Carbonell et al. Our starting points are the physical processes in which such form factors are measured, i.e. electron scattering off the bound state, or the semileptonic weak decay of the bound state. These processes are treated by means of a coupled-channel framework for a Bakamjian-Thomas type mass operator. A current with the correct covariance properties is then derived from the pertinent leading-order electroweak scattering or decay amplitude. As it turns out, the electromagnetic current is affected by unphysical contributions which can be traced back to wrong cluster properties inherent in the Bakamjian-Thomas construction. These spurious contributions, however, can be separated uniquely, as in the covariant light-front approach. In this way we end up with form factors which agree with tho...

  7. Do atmospheric aerosols form glasses?

    OpenAIRE

    Zobrist, B.; Marcolli, C.; Pedernera, D. A.; Koop, T.

    2008-01-01

    A new process is presented by which water soluble organics might influence ice nucleation, ice growth, chemical reactions and water uptake of aerosols in the upper troposphere: the formation of glassy aerosol particles. Glasses are disordered amorphous (non-crystalline) solids that form when a liquid is cooled without crystallization until the viscosity increases exponentially and molecular diffusion practically ceases. The glass transition temperatures, Tg

  8. Superprocesses on Two Space Forms

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Superprocess is one class of measure-valued branching Markov processes. Many results of the process on abstract spaces and Euclidean spaces are obtained in the literature. In this paper, we discuss super-Brownian motions on two space forms and reveal partially the relationship between the properties of superprocesses and the geometric structure of the underlying state spaces. Finally, we also presents some open problems.

  9. SOD FORM OF PERENNIAL GRASSES

    OpenAIRE

    Belyuchenko I. S.

    2014-01-01

    The article considers the peculiarities of turf and sod, specificity of formation of kidneys for regeneration, types of shoots, vegetative mobility and specificity of growth in certain conditions, turf grasses are divided into loosely-and tightly-turf characterized, by specific features of environmental, biological characteristics; forming turf from generative rosettes, elongated and shortened vegetative, side ground shoots, differing specificity of morphological, biochemical and fitocoenotic...

  10. The Integral Form of Supergravity

    CERN Document Server

    Castellani, L; Grassi, P A

    2016-01-01

    By using integral forms we derive the superspace action of D=3, N=1 supergravity as an integral on a supermanifold. The construction is based on target space picture changing operators, here playing the role of Poincare' duals to the lower-dimensional spacetime surfaces embedded into the supermanifold. We show how the group geometrical action based on the group manifold approach interpolates between the superspace and the component supergravity actions, thus providing another proof of their equivalence.

  11. The faintest star forming galaxies

    CERN Document Server

    Ranalli, P

    2003-01-01

    I briefly report on the X-ray detection of 10 radio sub-mJy sources in the 2 Ms Chandra observation of the Hubble Deep Field North region. These sources follow the same radio/X-ray luminosities relation which holds for nearby galaxies. Making use of this relation, X-ray number counts from star forming galaxies are predicted from the deep radio Log N-Log S's.

  12. Lecture Notes on Differential Forms

    OpenAIRE

    2016-01-01

    This is a series of lecture notes, with embedded problems, aimed at students studying differential topology. Many revered texts, such as Spivak's "Calculus on Manifolds" and Guillemin and Pollack's "Differential Topology" introduce forms by first working through properties of alternating tensors. Unfortunately, many students get bogged down with the whole notion of tensors and never get to the punch lines: Stokes' Theorem, de Rham cohomology, Poincare duality, and the realization of various t...

  13. The integral form of supergravity

    Energy Technology Data Exchange (ETDEWEB)

    Castellani, L. [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale,Viale T. Michel, 11, 15121 Alessandria (Italy); INFN - Sezione di Torino,via P. Giuria 1, 10125 Torino (Italy); Catenacci, R. [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale,Viale T. Michel, 11, 15121 Alessandria (Italy); Gruppo Nazionale di Fisica Matematica, INdAM,P.le Aldo Moro 5, 00185 Roma (Italy); Grassi, P.A. [Dipartimento di Scienze e Innovazione Tecnologica, Università del Piemonte Orientale,Viale T. Michel, 11, 15121 Alessandria (Italy); INFN - Sezione di Torino,via P. Giuria 1, 10125 Torino (Italy)

    2016-10-11

    By using integral forms we derive the superspace action of D=3,N=1 supergravity as an integral on a supermanifold. The construction is based on target space picture changing operators, here playing the rôle of Poincaré duals to the lower-dimensional spacetime surfaces embedded into the supermanifold. We show how the group geometrical action based on the group manifold approach interpolates between the superspace and the component supergravity actions, thus providing another proof of their equivalence.

  14. Lie groups and automorphic forms

    CERN Document Server

    Ji, Lizhen; Xu, H W; Yau, Shing-Tung

    2006-01-01

    Lie groups are fundamental objects in mathematics. They occur naturally in differential geometry, algebraic geometry, representation theory, number theory, and other areas. Closely related are arithmetic subgroups, locally symmetric spaces and the spectral theory of automorphic forms. This book consists of five chapters which give comprehensive introductions to Lie groups, Lie algebras, arithmetic groups and reduction theories, cohomology of arithmetic groups, and the Petersson and Kuznetsov trace formulas.

  15. Current forms and gauge invariance

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, M Castrillon [Departemento de GeometrIa y TopologIa, Facultad de Matematicas, Universidad Complutense de Madrid, 28040-Madrid (Spain); Masque, J Munoz [Instituto de FIsica Aplicada, CSIC, C/Serrano 144, 28006-Madrid (Spain)

    2004-05-14

    Let C be the bundle of connections of a principal G-bundle {pi}:P {yields} M, and let V be the vector bundle associated with P by a linear representation G {yields} GL(V) on a finite-dimensional vector space V. The Lagrangians on J{sup 1}(C x {sub M}V) whose current form is gauge invariant, are described and the gauge-invariant Lagrangians on J{sup 1}(V) are classified.

  16. Rib forming tool for tubing

    Science.gov (United States)

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  17. Fuzzy logic of Aristotelian forms

    Energy Technology Data Exchange (ETDEWEB)

    Perlovsky, L.I. [Nichols Research Corp., Lexington, MA (United States)

    1996-12-31

    Model-based approaches to pattern recognition and machine vision have been proposed to overcome the exorbitant training requirements of earlier computational paradigms. However, uncertainties in data were found to lead to a combinatorial explosion of the computational complexity. This issue is related here to the roles of a priori knowledge vs. adaptive learning. What is the a-priori knowledge representation that supports learning? I introduce Modeling Field Theory (MFT), a model-based neural network whose adaptive learning is based on a priori models. These models combine deterministic, fuzzy, and statistical aspects to account for a priori knowledge, its fuzzy nature, and data uncertainties. In the process of learning, a priori fuzzy concepts converge to crisp or probabilistic concepts. The MFT is a convergent dynamical system of only linear computational complexity. Fuzzy logic turns out to be essential for reducing the combinatorial complexity to linear one. I will discuss the relationship of the new computational paradigm to two theories due to Aristotle: theory of Forms and logic. While theory of Forms argued that the mind cannot be based on ready-made a priori concepts, Aristotelian logic operated with just such concepts. I discuss an interpretation of MFT suggesting that its fuzzy logic, combining a-priority and adaptivity, implements Aristotelian theory of Forms (theory of mind). Thus, 2300 years after Aristotle, a logic is developed suitable for his theory of mind.

  18. Molecular contacts for chlorosome envelope proteins revealed by cross-linking studies with chlorosomes from Chlorobium tepidum

    DEFF Research Database (Denmark)

    Li, Hui; Frigaard, Niels-Ulrik; Bryant, Donald A

    2006-01-01

    type and mutants lacking a single chlorosome protein were cross-linked with the zero-length cross-linker 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide (EDC) and analyzed by gel electrophoresis. Similar cross-linking products were observed when the time and temperature were varied or when EDC...... was replaced with glutaraldehyde. Specific interactions between chlorosome proteins in cross-linked products were identified by immunoblotting with polyclonal antibodies raised against recombinant chlorosome proteins. We confirmed these interactions by demonstrating that these products were missing...... in appropriate mutants. Confirming the location of CsmA in the paracrystalline baseplate, cross-linking showed that CsmA forms dimers, trimers, and homomultimers as large as dodecamers and that CsmA directly interacts with the Fenna-Matthews-Olson protein. Cross-linking further suggests that the precursor form...

  19. Development of unconventional forming methods

    Directory of Open Access Journals (Sweden)

    S. Rusz

    2012-10-01

    Full Text Available Purpose: Paper presents results of progress ECAP processing method for UFG structure reached (gained.The properties and microstructure are influenced by technological factors during application ECAP method.Design/methodology/approach: Summary of methods studied on Department of technology at Machining faculty of VŠB-TU Ostrava through of co-operation with Institute of Engineering Materials and Biomaterials, Silesian University of Technology is presented.Findings: Achievement of ultra-fine grained structure in initial material leads to substantial increase of plasticity and makes it possible to form materials in conditions of „superplastic state“. Achievement of the required structure depends namely of the tool geometry, number of passes through the matrix, obtained deformation magnitude and strain rate, process temperature and lubrication conditions. High deformation at comparatively low homologous temperatures is an efficient method of production of ultra-fine grained solid materials.The new technologies, which use severe plastic deformation, comprise namely these techniques: High Pressure Torsion, Equal Channel Angular Pressing = ECAP, Cyclic Channel Die Compression = CCDC, Cyclic Extrusion Compression = CEC, Continuous Extrusion Forming = CONFORM, Accumulative Roll Bonding, Constrained Groove Pressing.Research limitations/implications: Achieved hardness and microstructure characteristics will be determined by new research.Practical implications: The results may be utilized for a relation between structure and properties of the investigated materials in future process of manufacturing.Originality/value: These results contribute to complex evaluation of properties new metals after application unconventional forming methods. The results of this paper are determined for research workers deal by the process severe plastic deformation.

  20. CERAMIC WASTE FORM DATA PACKAGE

    Energy Technology Data Exchange (ETDEWEB)

    Amoroso, J.; Marra, J.

    2014-06-13

    The purpose of this data package is to provide information about simulated crystalline waste forms that can be used to select an appropriate composition for a Cold Crucible Induction Melter (CCIM) proof of principle demonstration. Melt processing, viscosity, electrical conductivity, and thermal analysis information was collected to assess the ability of two potential candidate ceramic compositions to be processed in the Idaho National Laboratory (INL) CCIM and to guide processing parameters for the CCIM operation. Given uncertainties in the CCIM capabilities to reach certain temperatures throughout the system, one waste form designated 'Fe-MP' was designed towards enabling processing and another, designated 'CAF-5%TM-MP' was designed towards optimized microstructure. Melt processing studies confirmed both compositions could be poured from a crucible at 1600{degrees}C although the CAF-5%TM-MP composition froze before pouring was complete due to rapid crystallization (upon cooling). X-ray diffraction measurements confirmed the crystalline nature and phase assemblages of the compositions. The kinetics of melting and crystallization appeared to vary significantly between the compositions. Impedance spectroscopy results indicated the electrical conductivity is acceptable with respect to processing in the CCIM. The success of processing either ceramic composition will depend on the thermal profiles throughout the CCIM. In particular, the working temperature of the pour spout relative to the bulk melter which can approach 1700{degrees}C. The Fe-MP composition is recommended to demonstrate proof of principle for crystalline simulated waste forms considering the current configuration of INL's CCIM. If proposed modifications to the CCIM can maintain a nominal temperature of 1600{degrees}C throughout the melter, drain, and pour spout, then the CAF-5%TM-MP composition should be considered for a proof of principle demonstration.

  1. Numerical Simulation of Peen Forming

    Institute of Scientific and Technical Information of China (English)

    Kang Xiaoming; Ma Zeen; Gu Lin; Chen ming

    2004-01-01

    Peen forming is the most important process for the manufacturing of integral wing skin panels. In order to determine peening parameters, an equivalent deformation theory was proposed in which peening parameters are transformed into equivalent nodal forces. In this study, a linear elastic shell finite element method is adopted. Other related problems such as wing skin panel modeling and peening scheme analysis were also outlined. The method has been applied to manufacturing panels of a certain Chinese aircraft and was proved to be effective in reducing peening experimental tests and improving products quality.

  2. Noncigarette forms of tobacco use.

    Science.gov (United States)

    Viegas, Carlos Alberto de Assis

    2008-12-01

    There are many preparations for tobacco use, which can be classified as smoking or smokeless tobacco. Among the noncigarette preparations that produce smoke, we cite cigars, pipes and narghiles. Smokeless tobacco can be found in preparations for chewing or for being absorbed by nasal and oral mucosae (snuff). However, all tobacco products deliver nicotine to the central nervous system and there is a confirmed risk of dependence. In addition, there is no safe form of tobacco use, and tobacco users have a significantly increased risk of morbidity and premature mortality due to tobacco-related diseases.

  3. The Form of HWID Theory

    DEFF Research Database (Denmark)

    Clemmensen, Torkil

    2015-01-01

    The aim of activities within the Human-Computer Interaction (HCI) area named Human Work Interaction Design (HWID) is to establish relationships between empirical work-domain studies and recent developments in interaction design. Recent areas of research within HWID include design sketches for work...... in research presented at a recent working conference, and find that a frequent form of HWID theory may be a combination of a HCI theory, domain-specific theory and theorizing on the relation between empirical work analysis and interaction design. At the end of the paper, we propose some constraints...

  4. Strange chiral nucleon form factors

    CERN Document Server

    Hemmert, T R; Meißner, Ulf G; Hemmert, Thomas R.; Kubis, Bastian; Meissner, Ulf-G.

    1999-01-01

    We investigate the strange electric and magnetic form factors of the nucleon in the framework of heavy baryon chiral perturbation theory to third order in the chiral expansion. All counterterms can be fixed from data. In particular, the two unknown singlet couplings can be deduced from the parity-violating electron scattering experiments performed by the SAMPLE and the HAPPEX collaborations. Within the given uncertainties, our analysis leads to a small and positive electric strangeness radius, $ = (0.05 \\pm 0.16) fm^2$. We also deduce the consequences for the upcoming MAMI A4 experiment.

  5. Baryon Form Factors at Threshold

    Energy Technology Data Exchange (ETDEWEB)

    Baldini Ferroli, Rinaldo [Museo Storico della Fisica e Centro Studi e Ricerche ' E. Fermi' , Rome (Italy); INFN, Laboratori Nazionali di Frascati, Frascati (Italy); Pacetti, Simone [INFN and Dipartimento di Fisica, Universita di Perugia, Perugia (Italy)

    2012-04-15

    An extensive study of the e{sup +}e{sup -}{yields}pp{sup Macron }BABAR cross section data is presented. Two unexpected outcomes have been found: the modulus of the proton form factor is normalized to one at threshold, i.e.: |G{sup p}(4M{sub p}{sup 2})|=1, as a pointlike fermion, and the resummation factor in the Sommerfeld formula is not needed. Other e{sup +}e{sup -} {yields} baryon-antibaryon cross sections show a similar behavior near threshold.

  6. Emerging Forms of Cultural Capital

    DEFF Research Database (Denmark)

    Prieur, Annick; Savage, Mike

    2013-01-01

    This paper takes stock of recent research on patterns of cultural engagement in various European nations, with specific reference to British and Danish research. It argues that Bourdieu's original theorisation of cultural capital in ‘Distinction’ needs to be significantly updated to register...... the decline of ‘highbrow’ culture which these studies reveal. However, we argue that this shift does not entail the erosion of cultural capital itself, or the rise of the ‘cultural omnivore’, so much as the emergence of a form of ‘cosmopolitan cultural capital’. We argue that this emerging cultural capital...

  7. Terra Firma-forme Dermatosis

    Directory of Open Access Journals (Sweden)

    Anagha Ramesh Babu

    2013-01-01

    Full Text Available Terra firma-forme dermatosis is a cutaneous discoloration. ‘Dirty’ brown grey cutaneous patches and plaques that can be rid off by forceful swabbing with alcohol pads characterize it. The pathogenesis has been attributed to abnormal and delayed keratinization. It poses no medical threat. A 40-year-old male patient presented to the Department of Dermatology with a 2-3 month history of persistent pigmented patches on both upper arms. The lesions were not associated with itching or burning sensation. He gives no history of exacerbation on exposure to the sun.

  8. Forms of creativity in translation

    Directory of Open Access Journals (Sweden)

    Lucia V Aranda

    2009-12-01

    Full Text Available http://dx.doi.org/10.5007/2175-7968.2009v1n23p23This paper explores the creative constructs utilized by translators in the reformulation of texts. As translation studies realigns the definition of translation vis-à-vis the original, a number of factors inform translations: the agency and subjectivity of the translator, as well as questions of form, and the more obvious social factors. This discussion addresses the articulation of creativity as a response to specific cases and repositions translation as part of a greater creative project.

  9. Screening three-form fields

    CERN Document Server

    Barreiro, Tiago; Nunes, Nelson J

    2016-01-01

    Screening mechanisms for a three-form field around a dense source such as the Sun are investigated. Working with the dual vector, we can obtain a thin-shell where field interactions are short range. The field outside the source adopts the configuration of a dipole which is a manifestly distinct behaviour from the one obtained with a scalar field or even a previously proposed vector field model. We identify the region of parameter space where this model satisfies present solar system tests.

  10. Screening three-form fields

    Science.gov (United States)

    Barreiro, Tiago; Bertello, Ugo; Nunes, Nelson J.

    2017-10-01

    Screening mechanisms for a three-form field around a dense source such as the Sun are investigated. Working with the dual vector, we can obtain a thin-shell where field interactions are short range. The field outside the source adopts the configuration of a dipole which is a manifestly distinct behaviour from the one obtained with a scalar field or even a previously proposed vector field model. We identify the region of parameter space where this model satisfies present solar system tests.

  11. Theoretical mechanics for sixth forms

    CERN Document Server

    Plumpton, C

    1971-01-01

    Theoretical Mechanics for Sixth Forms, Second Edition is a 14-chapter book that begins by elucidating the nature of theoretical mechanics. The book then describes the statics of a particle in illustration of the techniques of handling vector quantities. Subsequent chapters focus on the principle of moments, parallel forces and centers of gravity; and the application of Newton's second law to the dynamics of a particle and the ideas of work and energy, impulse and momentum, and power. The concept of friction is also explained. This volume concludes with chapters concerning motion in a circle an

  12. Capillary flows with forming interfaces

    CERN Document Server

    Shikhmurzaev, Yulii D

    2007-01-01

    PREFACEINTRODUCTION Free-surface flows in nature and industryScope of the bookFUNDAMENTALS OF FLUID MECHANICS Main concepts Governing equations Elements of thermodynamics Classical boundary conditions Physically meaningful solutions and paradoxes of modelingMOVING CONTACT LINES: AN OVERVIEW Essence of the problem Experimental observations Molecular dynamics simulations Review of theoriesThe key to the moving contact-line problemBOUNDARY CONDITIONS ON FORMING INTERFACES Modeling of interfacesConservation lawsLiquid-gas and liquid-solid interfacesLiquid-liquid interfaces SummaryOpen questions an

  13. Instructions & Forms for Authors

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Journal of Materials Sciences & Technology is a monthly journal for the rapid dissemination of new, impor- tant results in material and related fields. Submission Electronic files of MS Word and PDF are acceptable. Please visit http://www.jmst.org and submit online. Submission of a manuscript must be the original work of the author(s) and has not been published elsewhere or under consideration for another publication, or a substantially similar form in any language. Authors are encouraged to recommend three to five individuals (including their research fields, e-mail, phone numbers and addresses) who are qualified to serve as referees for their paper.

  14. Fabrication Aware Form-finding

    DEFF Research Database (Denmark)

    Egholm Pedersen, Ole; Larsen, Niels Martin; Pigram, Dave

    2014-01-01

    parts. The first material system employs a novel rotated joint design to allow the structural tuning of quasi-reciprocal timber frame elements fabricated from multi-axis machined plywood sheet stock. The second em-loys discontinuous post-tensioning to assemble unique precast concrete components......This paper describes a design and construction method that combines two distinct material systems with fabrication aware form-finding and file-to-factory workflows. The method enables the fluent creation of complex materially efficient structures comprising high populations of geometrically unique...

  15. AMERICAN QUARTER HORSES’ BEHAVIORAL FORMS

    Directory of Open Access Journals (Sweden)

    Iryna Olexandrivna Suprun

    2016-02-01

    Full Text Available The review of basic literary sources is made out of behavior of horse. On the basis of the field researches (visual supervisions after three different aged groups of mares it is built ethograms. An ethogram of behavioral forms among mares was developed. They represent the different forms of mares’ behavior in a dynamics. The reaction of mares of the different age-related and physiology groups on appearance of extraneous objects on a pasture, their activity, hierarchy, socialization is analyzed in groups. Several main studies on equines were reviewed in ethogram. Four objects were placed into the pasture with the mares and foals including a mat, cone, halter, and mounting block. Initial interest of mares in objects was high. Herd mentality highly evident. When one horse spooked at object the whole herd followed. After 5 minutes, majority of mares and foals lose interest in objects. The major general behavior categories observed include: locomotion, comfort, and harem social. Dominance was demonstrated while looking at the objects. Dominance was also demonstrated when a mare wanted to be in a specific place or play with a specific toy, she would pin her ears back, bite, or kick at the other mare. 

  16. Gravity, light and plant form.

    Science.gov (United States)

    Hangarter, R P

    1997-06-01

    Plants have evolved highly sensitive and selective mechanisms that detect and respond to various aspects of their environment. As a plant develops, it integrates the environmental information perceived by all of its sensory systems and adapts its growth to the prevailing environmental conditions. Light is of critical importance because plants depend on it for energy and, thus, survival. The quantity, quality and direction of light are perceived by several different photosensory systems that together regulate nearly all stages of plant development, presumably in order to maintain photosynthetic efficiency. Gravity provides an almost constant stimulus that is the source of critical spatial information about its surroundings and provides important cues for orientating plant growth. Gravity plays a particularly important role during the early stages of seedling growth by stimulating a negative gravitropic response in the primary shoot that orientates it towards the source of light, and a positive gravitropic response in the primary root that causes it to grow down into the soil, providing support and nutrient acquisition. Gravity also influences plant form during later stages of development through its effect on lateral organs and supporting structures. Thus, the final form of a plant depends on the cumulative effects of light, gravity and other environmental sensory inputs on endogenous developmental programs. This article is focused on developmental interactions modulated by light and gravity.

  17. Prosodic form and parsing commitments.

    Science.gov (United States)

    Watt, S M; Murray, W S

    1996-03-01

    This paper examines the question of whether there are effects of prosody on the syntactic parsing of temporarily ambiguous sentences containing complement verbs. It reports the results of five experiments employing cross-modal response tasks where the visually presented target word was either an ¿appropriate' or an ¿inappropriate' continuation in terms of the prosodic form of the preceeding auditory sentence fragment. Two experiments employing cross-modal naming only showed indications of sensitivity to syntactic and appropriateness manipulations when coupled with a simultaneous appropriateness judgment task. In contrast, the experiments employing cross-modal lexical decision showed greater sensitivity to syntactic and appropriateness effects. However, while the results from these studies replicated our earlier auditory parsing results and provided support for the suggestion that there are differences in visual and auditory parsing processes and for a ¿constituent-based, ' ¿minimal commitment' type auditory parser, none of the studies demonstrated an effect of prosodic form on the parsing process.

  18. Do atmospheric aerosols form glasses?

    Science.gov (United States)

    Zobrist, B.; Marcolli, C.; Pedernera, D. A.; Koop, T.

    2008-09-01

    A new process is presented by which water soluble organics might influence ice nucleation, ice growth, chemical reactions and water uptake of aerosols in the upper troposphere: the formation of glassy aerosol particles. Glasses are disordered amorphous (non-crystalline) solids that form when a liquid is cooled without crystallization until the viscosity increases exponentially and molecular diffusion practically ceases. The glass transition temperatures, Tg, homogeneous ice nucleation temperatures, Thom, and ice melting temperatures, Tm, of various aqueous inorganic, organic and multi-component solutions are investigated with a differential scanning calorimeter. The investigated solutes are: various polyols, glucose, raffinose, levoglucosan, an aromatic compound, sulfuric acid, ammonium bisulfate and mixtures of dicarboxylic acids (M5), of dicarboxylic acids and ammonium sulfate (M5AS), of two polyols, of glucose and ammonium nitrate, and of raffinose and M5AS. The results indicate that aqueous solutions of the investigated inorganic solutes show Tg values that are too low to be of atmospheric importance. In contrast, aqueous organic and multi-component solutions readily form glasses at low but atmospherically relevant temperatures (≤230 K). To apply the laboratory data to the atmospheric situation, the measured phase transition temperatures were transformed from a concentration to a water activity scale by extrapolating water activities determined between 252 K and 313 K to lower temperatures. The obtained state diagrams reveal that the higher the molar mass of the aqueous organic or multi-component solutes, the higher Tg of their respective solutions at a given water activity. To a lesser extent, Tg also depends on the hydrophilicity of the organic solutes. Therefore, aerosol particles containing larger (≳150 g mol-1) and more hydrophobic organic molecules are more likely to form glasses at intermediate to high relative humidities in the upper troposphere

  19. Do atmospheric aerosols form glasses?

    Directory of Open Access Journals (Sweden)

    D. A. Pedernera

    2008-09-01

    Full Text Available A new process is presented by which water soluble organics might influence ice nucleation, ice growth, chemical reactions and water uptake of aerosols in the upper troposphere: the formation of glassy aerosol particles. Glasses are disordered amorphous (non-crystalline solids that form when a liquid is cooled without crystallization until the viscosity increases exponentially and molecular diffusion practically ceases. The glass transition temperatures, Tg, homogeneous ice nucleation temperatures, Thom, and ice melting temperatures, Tm, of various aqueous inorganic, organic and multi-component solutions are investigated with a differential scanning calorimeter. The investigated solutes are: various polyols, glucose, raffinose, levoglucosan, an aromatic compound, sulfuric acid, ammonium bisulfate and mixtures of dicarboxylic acids (M5, of dicarboxylic acids and ammonium sulfate (M5AS, of two polyols, of glucose and ammonium nitrate, and of raffinose and M5AS. The results indicate that aqueous solutions of the investigated inorganic solutes show Tg values that are too low to be of atmospheric importance. In contrast, aqueous organic and multi-component solutions readily form glasses at low but atmospherically relevant temperatures (≤230 K. To apply the laboratory data to the atmospheric situation, the measured phase transition temperatures were transformed from a concentration to a water activity scale by extrapolating water activities determined between 252 K and 313 K to lower temperatures. The obtained state diagrams reveal that the higher the molar mass of the aqueous organic or multi-component solutes, the higher Tg of their respective solutions at a given water activity. To a lesser extent, Tg also depends on the hydrophilicity of the organic solutes. Therefore, aerosol particles containing larger (≳150 g mol−1 and

  20. Do atmospheric aerosols form glasses?

    Directory of Open Access Journals (Sweden)

    B. Zobrist

    2008-05-01

    Full Text Available A new process is presented by which water-soluble organics might influence ice nucleation, ice growth, chemical reactions and water uptake of aerosols in the upper troposphere: the formation of glassy aerosol particles. Glasses are disordered amorphous (non-crystalline solids that form when a liquid is cooled without crystallization until the viscosity increases exponentially and molecular diffusion practically ceases. The glass transition temperatures, Tg, homogeneous ice nucleation temperatures, Thom, and ice melting temperatures, Tm, of various aqueous inorganic, organic and multi-component solutions are investigated with a differential scanning calorimeter. The investigated solutes are: various polyols, glucose, raffinose, levoglucosan, an aromatic compound, sulfuric acid, ammonium bisulphate and mixtures of dicarboxylic acids (M5, of dicarboxylic acids and ammonium sulphate (M5AS, of two polyols, of glucose and ammonium nitrate, and of raffinose and M5AS. The results indicate that aqueous solutions of the investigated inorganic solutes show Tg-values that are too low to be of atmospheric importance. In contrast, aqueous organic and multi-component solutions readily form glasses at low but atmospherically relevant temperatures (≤230 K. To apply the laboratory data to the atmospheric situation, the measured phase transition temperatures were transformed from a concentration to a water activity scale by extrapolating water activities determined between 252 K and 313 K to lower temperatures. The obtained state diagrams reveal that the higher the molar mass of the aqueous organic or multi-component solutes, the higher Tg of their respective solutions at a given water activity. To a lesser extent, Tg also depends on the hydrophilicity of the organic solutes. Therefore, aerosol particles containing larger and more hydrophobic organic

  1. Alumina forming iron base superalloy

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, Yukinori; Muralidharan, Govindarajan; Brady, Michael P.

    2014-08-26

    An austenitic stainless steel alloy, consists essentially of, in weight percent 2.5 to 4 Al; 25 to 35 Ni; 12 to 19 Cr; at least 1, up to 4 total of at least one element selected from the group consisting of Nb and Ta; 0.5 to 3 Ti; less than 0.5 V; 0.1 to 1 of at least on element selected from the group consisting of Zr and Hf; 0.03 to 0.2 C; 0.005 to 0.1 B; and base Fe. The weight percent Fe is greater than the weight percent Ni. The alloy forms an external continuous scale including alumina, and contains coherent precipitates of .gamma.'-Ni.sub.3Al, and a stable essentially single phase FCC austenitic matrix microstructure. The austenitic matrix is essentially delta-ferrite-free and essentially BCC-phase-free.

  2. Innovative forms of citizen participation

    DEFF Research Database (Denmark)

    Nyseth, Torill; Ringholm, Toril; Agger, Annika

    Formal procedures of citizen participation in planning and urban governance in Norway and Denmark share many similarities. Although the planning laws are intended to give all affected stakeholders a chance to air their concerns within a limited time frame, then few use these channels for voice......: What characterises the new and innovative forms of citizen participation in urban planning in terms of innovation? And in what ways and to what degree is input from these processes fed into the formal planning processes? Theoretically, the paper is inspired by the concept of: ‘planning...... interact within the field of urban governance. This is for example seen in urban regeneration projects in Denmark and planning experiments in Norway where we are witnessing more inclusive and bottom-up initiated interactions between public authorities and local actors. The key question in this paper is...

  3. Emerging Forms of Cultural Capital

    DEFF Research Database (Denmark)

    Prieur, Annick; Savage, Mike

    - the claims that there are forms of emotional, subcultural or national cultural capital at work - The claim about cosmopolitanism or an international orientation as a distinctive feature of the culturally privileged classes The paper responds to the first theme announced in the call for this conference......This paper reviews recent European studies to assess whether cultural capital now has the same characteristics – or may be rather the same functions - as when Distinction was written. The paper will examine empirical applications of the concept of cultural capital in leading European studies...... – and hence are highly appropriate for direct comparisons with that study. This paper will begin by raising general issues regarding the meaning of the concept, and about how one may make assessments and claims about cultural capital. Here we consider how the legitimacy of certain cultural competencies...

  4. New marine science organization formed

    Science.gov (United States)

    Wooster, Warren S.

    A new international organization, the North Pacific Marine Science Organization (PICES) will be established to promote and coordinate marine scientific research in the northern North Pacific Ocean and the Berlin Sea. This was decided in Ottawa on December 12, 1990, when a draft convention was approved by representatives of Canada, China, Japan, the United States, and the Soviet Union. PICES will focus on research on the ocean environment and its interactions with land and atmosphere, its role and response to global weather and climate change, its flora, fauna and ecosystems, its uses and resources, and impacts upon it from human activities. Such studies relate not only to the effects of fishing and environmental change on fish stocks but also to such issues as the impacts of oil spills and other forms of pollution and the eventual consequences of climate change for uses of the ocean and its resources.

  5. The Form of HWID Theory

    DEFF Research Database (Denmark)

    Clemmensen, Torkil

    2015-01-01

    The aim of activities within the Human-Computer Interaction (HCI) area named Human Work Interaction Design (HWID) is to establish relationships between empirical work-domain studies and recent developments in interaction design. Recent areas of research within HWID include design sketches for work......, usability in context, work analysis for HCI, and integration of work analysis and interaction design methods for pervasive and smart workplaces. Across these areas, the question emerges what form of theory may HWID research produce? The aim with this paper is to investigate the requirements of different...... research purposes to a common framework. We take the position that we should approach HWID with a lightweight, medium-level framework that is useful to guide the application of other theories to study the relation between work analysis and interaction design. We analyse the requirements to theory found...

  6. The Textile Form of Sound

    DEFF Research Database (Denmark)

    Bendixen, Cecilie

    Sound is a part of architecture, and sound is complex. Upon this, sound is invisible. How is it then possible to design visual objects that interact with the sound? This paper addresses the problem of how to get access to the complexity of sound and how to make textile material revealing the form...... three-dimensional geometries of interfering spheres are created. Textiles are generally a very good sound dampening material. To dampen the sound most effective it should be placed where the sound energy is highest. To find these invisible spots of energy and to reveal the geometry of them, two...... experiments were carried out. One experiment was done in a laboratory with a sound measure instrument and textiles arranged in different positions and shapes. Here the high energy spots were located. The other experiment is ongoing and is an investigation of how textiles can take the shape of the sound...

  7. Forms and Linear Network Codes

    DEFF Research Database (Denmark)

    Hansen, Johan P.

    spaces of Veronese varieties. Linear network coding transmits information in terms of a basis of a vector space and the information is received as a basis of a possibly altered vector space. Ralf Koetter and Frank R. Kschischang introduced a metric on the set af vector spaces and showed that a minimal......We present a general theory to obtain linear network codes utilizing forms and obtain explicit families of equidimensional vector spaces, in which any pair of distinct vector spaces intersect in the same small dimension. The theory is inspired by the methods of the author utilizing the osculating...... them suitable for linear network coding. The parameters of the resulting linear network codes are determined....

  8. Forming impressions from incongruent traits.

    Science.gov (United States)

    Casselden, P A; Hampson, S E

    1990-08-01

    The factors that affect the ease with which impressions are formed from incongruent trait pairs are investigated. In Experiments 1 and 2, trait pairs that were both descriptively and evaluatively congruent, as well as ones that were only evaluatively congruent, were found to be more imaginable and to be perceived as more frequently co-occurring than incongruent trait pairs. In Experiment 3, response latency provided a converging measure of ease of imaginability. Experiment 4 examined written descriptions of targets described by these trait pairs, and found more attempts to integrate the congruent than the incongruent pairs. These findings are discussed in terms of the relation between laypersons' impressions of personality and formal personality assessment.

  9. Growth and form of spherulites

    Science.gov (United States)

    Gránásy, László; Pusztai, Tamás; Tegze, György; Warren, James A.; Douglas, Jack F.

    2005-07-01

    Many structural materials (metal alloys, polymers, minerals, etc.) are formed by quenching liquids into crystalline solids. This highly nonequilibrium process often leads to polycrystalline growth patterns that are broadly termed “spherulites” because of their large-scale average spherical shape. Despite the prevalence and practical importance of spherulite formation, only rather qualitative concepts of this phenomenon exist. It is established that phase field methods naturally account for diffusional instabilities that are responsible for dendritic single-crystal growth. However, a generalization of this model is required to describe spherulitic growth patterns, and in the present paper we propose a minimal model of this fundamental crystal growth process. Our calculations indicate that the diversity of spherulitic growth morphologies arises from a competition between the ordering effect of discrete local crystallographic symmetries and the randomization of the local crystallographic orientation that accompanies crystal grain nucleation at the growth front [growth front nucleation (GFN)]. This randomization in the orientation accounts for the isotropy of spherulitic growth at large length scales and long times. In practice, many mechanisms can give rise to GFN, and the present work describes and explores three physically prevalent sources of disorder that lead to this kind of growth. While previous phase field modeling elucidated two of these mechanisms—disorder created by particulate impurities or other static disorder or by the dynamic heterogeneities that spontaneously form in supercooled liquids (even pure ones)—the present paper considers an additional mechanism, crystalline branching induced by a misorientation-dependent grain boundary energy, which can significantly affect spherulite morphology. We find the entire range of observed spherulite morphologies can be reproduced by this generalized phase field model of polycrystalline growth.

  10. 76 FR 41279 - Agency Information Collection Activities; Form I-864, Form I-864A, Form I-864EZ, and Form I-864W...

    Science.gov (United States)

    2011-07-13

    ... SECURITY U.S. Citizenship and Immigration Services Agency Information Collection Activities; Form I-864, Form I- 864A, Form I-864EZ, and Form I-864W; Extension of an Existing Information Collection; Comment Request ACTION: 30-Day Notice of Information Collection Under Review: Form I- 864, Affidavit of...

  11. 75 FR 51093 - Agency Information Collection Activities: Form I-864, Form I-864A, Form I-864EZ, and Form I-864W...

    Science.gov (United States)

    2010-08-18

    ... SECURITY U.S. Citizenship and Immigration Services Agency Information Collection Activities: Form I-864, Form I- 864A, Form I-864EZ, and Form I-864W; Extension of a Currently Approved Information Collection; Comment Request ACTION: 30-Day Notice of Information Collection Under Review: Form I- 864, Affidavit...

  12. Disjoint forms in graphical user interfaces

    NARCIS (Netherlands)

    Evers, S.; Achten, P.M.; Plasmeijer, M.J.; Loidl, H.W.

    2006-01-01

    Forms are parts of a graphical user interface (GUI) that show a set of values and allow the user to update them. The declarative form construction library FunctionalForms is extended with disjoint form combinators to capture some common patterns in which the form structure expresses a choice. We dem

  13. 48 CFR 3053.303 - Agency forms.

    Science.gov (United States)

    2010-10-01

    ... section illustrates agency-specified forms. To access these forms go to: http://www.dhs.gov (under “Business, Acquisition Information”) or https://dhsonline.dhs.gov/portal/jhtml/general/forms.jhtml....

  14. Are There Various Forms of Lupus?

    Science.gov (United States)

    ... lupus Understanding lupus Are there various forms of lupus? Systemic Lupus Erythematosus Systemic lupus is the most common form ... and tissues at “ Lupus and the Body ”. Cutaneous Lupus Erythematosus This form of lupus is limited to ...

  15. A Framework for Interactively Helpful Web Forms

    DEFF Research Database (Denmark)

    Bohøj, Morten; Bouvin, Niels Olof; Gammelmark, Henrik

    2012-01-01

    AdapForms is a framework for adaptive forms, consisting of a form definition language designating structure and constraints upon acceptable input, and a software architecture that continuously validates and adapts the form presented to the user. The validation is performed server-side, which enab...... enables the use of complex business logic without du- plicate code. Thus, the state of the form is kept persistently at the server, and the system ensures that all submitted forms are valid and type safe....

  16. Filtrating forms of soil bacteria

    Science.gov (United States)

    Van'kova, A. A.; Ivanov, P. I.; Emtsev, V. T.

    2013-03-01

    Filtrating (ultramicroscopic) forms (FF) of bacteria were studied in a soddy-podzolic soil and the root zone of alfalfa plants as part of populations of the most widespread physiological groups of soil bacteria. FF were obtained by filtering soil solutions through membrane filters with a pore diameter of 0.22 μm. It was established that the greater part of the bacteria in the soil and in the root zone of the plants has an ultramicroscopic size: the average diameter of the cells is 0.3 μm, and their length is 0.6 μm, which is significantly less than the cell size of banal bacteria. The number of FF varies within a wide range depending on the physicochemical conditions of the habitat. The FF number's dynamics in the soil is of a seasonal nature; i.e., the number of bacteria found increases in the summer and fall and decreases in the winter-spring period. In the rhizosphere of the alfalfa, over the vegetation period, the number of FF and their fraction in the total mass of the bacteria increase. A reverse tendency is observed in the rhizoplane. The morphological particularities (identified by an electron microscopy) and the nature of the FF indicate their physiological activity.

  17. Faith and Form on Screen

    Directory of Open Access Journals (Sweden)

    Henry Bacon

    2016-11-01

    Full Text Available To understand any aspect of being-in-the-world in general or cinematic experience in particular, both reductionist and holistic approaches are needed. Psychological accounts can give us only functional explanations of human behaviour or responses to signifying artifacts such as art. To understand the significance of these experiences the psychological must be complemented by a study on a level which may be termed spiritual. This line of thought is applied to analyses of Robert Bresson’s Pickpocket, starting from David Bordwell’s formalist and cognitive account of why many people experience this film as religious despite there being no explicit reference to religion. Paul Schrader’s analysis of the formal structure of this film in terms of his notion of transcendental style in film goes a step forward by explaining how the formal structure as he analyses it suggests a transcendental dimension which cannot be addressed directly. This approach connects in an illuminating way with Slavoj Žižek’s notions of the imaginary and the symbolic sphere. Bordwell’s approach, functioning on the psychological level, is basically reductionist, while Schrader’s, boosted with Žižek’s ideas as appropriated for the purposes of this article, is holistic and operative on the spiritual level. This two-tiered analysis reveals how cinematic form in Pickpocket serves as an indirect expression of faith.

  18. Miscellaneous Waste-Form FEPs

    Energy Technology Data Exchange (ETDEWEB)

    A. Schenker

    2000-12-08

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

  19. Uniform-droplet spray forming

    Energy Technology Data Exchange (ETDEWEB)

    Blue, C.A.; Sikka, V.K. [Oak Ridge National Lab., TN (United States); Chun, Jung-Hoon [Massachusetts Institute of Technology, Cambridge, MA (United States); Ando, T. [Tufts Univ., Medford, MA (United States)

    1997-04-01

    The uniform-droplet process is a new method of liquid-metal atomization that results in single droplets that can be used to produce mono-size powders or sprayed-on to substrates to produce near-net shapes with tailored microstructure. The mono-sized powder-production capability of the uniform-droplet process also has the potential of permitting engineered powder blends to produce components of controlled porosity. Metal and alloy powders are commercially produced by at least three different methods: gas atomization, water atomization, and rotating disk. All three methods produce powders of a broad range in size with a very small yield of fine powders with single-sized droplets that can be used to produce mono-size powders or sprayed-on substrates to produce near-net shapes with tailored microstructures. The economical analysis has shown the process to have the potential of reducing capital cost by 50% and operating cost by 37.5% when applied to powder making. For the spray-forming process, a 25% savings is expected in both the capital and operating costs. The project is jointly carried out at Massachusetts Institute of Technology (MIT), Tuffs University, and Oak Ridge National Laboratory (ORNL). Preliminary interactions with both finished parts and powder producers have shown a strong interest in the uniform-droplet process. Systematic studies are being conducted to optimize the process parameters, understand the solidification of droplets and spray deposits, and develop a uniform-droplet-system (UDS) apparatus appropriate for processing engineering alloys.

  20. A Framework for Interactively Helpful Web Forms

    DEFF Research Database (Denmark)

    Bohøj, Morten; Bouvin, Niels Olof; Gammelmark, Henrik

    2012-01-01

    AdapForms is a framework for adaptive forms, consisting of a form definition language designating structure and constraints upon acceptable input, and a software architecture that continuously validates and adapts the form presented to the user. The validation is performed server-side, which...

  1. E-Forms in E-Business

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The form-based application framework is proposed as a straightsolution for E-bu siness applications. A Rapid Application Development (RAD) tool FormNet is desi gned for developing complex enterprise network applications. Its main features and a comparison with Microsoft Windows Forms are presented in this paper. The tool can be also perfectly applied to the government form applications.

  2. An Adaptive Allocation Algorithm using Directional CSMA/CA over mmWave Wireless Personal Area Networks

    Directory of Open Access Journals (Sweden)

    Hyunhee Park

    2012-04-01

    Full Text Available Directional antennas have the considerable benefits of higher antenna gain, long transmission distance and spatial reuse compared to omni‐antennas. To support a directional antenna, IEEE 802.15.3c specifies a high data transmission rate and short frequency range communication based on the characteristics of 60GHz band. However, the contention‐based protocol of IEEE 802.15.3c may cause channel collisions and throughput degradation as the number of stations in the network increases. In order to resolve this problem and reduce channel access latency, we propose an adaptive allocation algorithm in which the contention window size for optimal transmission probability is derived after the directional information has been obtained by means of AP\tcontrol procedures. Extensive simulations demonstrate that the proposed algorithm outperforms the existing channel access scheme in IEEE 802.15.3c wireless personal area networks under different situations, especially when the number of contending stations is large.

  3. Stability of polymorphic forms of ranitidine hydrochloride.

    Science.gov (United States)

    Wu, V; Rades, T; Saville, D J

    2000-07-01

    Ranitidine-HCl can exist in two different polymorphic forms: form I (m.p. 134-140 degrees C) and form II (m.p. 140-144 degrees C). In the present study the stability of form I of ranitidine-HCl to a selection of powder pretreatments, to reflect conditions which might occur in manufacturing procedures, and also to a limited range of storage conditions was investigated. The original samples of form I and form II used were characterised by X-ray powder diffraction (XRPD), hot stage microscopy (HSM) and differential scanning calorimetry (DSC). A quantitative XRPD method for determining the fraction of form II in the presence of form I was used. XRPD data were analysed using regression techniques and artificial neural networks (ANN). The quantitative XRPD technique was then used to monitor the relative proportion of form II in each treated sample. Pretreatments of form I included (i) mixing with form II or with common excipients (ii) compression and grinding (iii) contact with solvents (followed by drying) before storage. Storage conditions involved three temperatures (20 degrees C, 30 degrees C, 42 degrees C) and three relative humidities (45% RH; 55% RH; 75% RH). Samples were stored for a period of 6 months. A limited factorial design was used. No increase in the form II:form I ratio was observed in the following pretreatment processes: introduction of form II nuclei into form I; introduction of excipients to form I; compression of form I powder at 5 and 15 tons; normal mixing and grinding processes; addition of isopropanol (IPA) or water/IPA mix followed by drying. In the pretreatment process where water was added to form I powder (with most or all of the powder dissolving), drying of the liquefied mass led to a mix of form I and form II. On storage at room temperature (20-30 degrees C), low relative humidity (45-55% RH), and in an air-tight container there was no increase in the form II:form I ratio. Storage of form I/form II mixes, particularly at high humidity

  4. Pre-form ceramic matrix composite cavity and method of forming and method of forming a ceramic matrix composite component

    Energy Technology Data Exchange (ETDEWEB)

    Monaghan, Philip Harold; Delvaux, John McConnell; Taxacher, Glenn Curtis

    2015-06-09

    A pre-form CMC cavity and method of forming pre-form CMC cavity for a ceramic matrix component includes providing a mandrel, applying a base ply to the mandrel, laying-up at least one CMC ply on the base ply, removing the mandrel, and densifying the base ply and the at least one CMC ply. The remaining densified base ply and at least one CMC ply form a ceramic matrix component having a desired geometry and a cavity formed therein. Also provided is a method of forming a CMC component.

  5. New CERN Health Insurance Scheme (CHIS) forms

    CERN Multimedia

    HR Department

    2015-01-01

    New versions of the following forms for claims and requests to the CERN Health Insurance Scheme (CHIS) have been released:   form for claiming reimbursement of medical expenses,   form for requesting advance reimbursement, and   dental estimate form (for treatments foreseen to exceed 800 CHF).   The new forms are available in French and English. They can either be completed electronically before being printed and signed, or completed in paper form. New detailed instructions can be found at the back of the claim form; CHIS members are invited to read them carefully. The electronic versions (PDF) of all the forms are available on the CHIS website and on the UNIQA Member Portal. CHIS Members are requested to use these new forms forthwith and to discard any previous version. Questions regarding the above should be addressed directly to UNIQA (72730 or 022.718 63 00 or uniqa.assurances@cern.ch).

  6. Current assisted superplastic forming of titanium alloy

    Directory of Open Access Journals (Sweden)

    Wang Guofeng

    2015-01-01

    Full Text Available Current assisted superplastic forming combines electric heating technology and superplastic forming technology, and can overcome some shortcomings of traditional superplastic forming effectively, such as slow heating rate, large energy loss, low production efficiency, etc. Since formability of titanium alloy at room temperature is poor, current assisted superplastic forming is suitable for titanium alloy. This paper mainly introduces the application of current assisted superplastic forming in the field of titanium alloy, including forming technology of double-hemisphere structure and bellows.

  7. Linearized gravity in terms of differential forms

    Science.gov (United States)

    Baykal, Ahmet; Dereli, Tekin

    2017-01-01

    A technique to linearize gravitational field equations is developed in which the perturbation metric coefficients are treated as second rank, symmetric, 1-form fields belonging to the Minkowski background spacetime by using the exterior algebra of differential forms.

  8. Green Supplier Network Manufacturer Commitment Form

    Science.gov (United States)

    Online form expressing interest in committing to be a Green Supplier; this form expresses your intent to participate in a confidential Green Suppliers Network assessment, implement recommended environmental improvements and complete a NIST MEP follow-up.

  9. Cubical version of combinatorial differential forms

    DEFF Research Database (Denmark)

    Kock, Anders

    2010-01-01

    The theory of combinatorial differential forms is usually presented in simplicial terms. We present here a cubical version; it depends on the possibility of forming affine combinations of mutual neighbour points in a manifold, in the context of synthetic differential geometry.......The theory of combinatorial differential forms is usually presented in simplicial terms. We present here a cubical version; it depends on the possibility of forming affine combinations of mutual neighbour points in a manifold, in the context of synthetic differential geometry....

  10. Nonparametric Identification of Glucose-Insulin Process in IDDM Patient with Multi-meal Disturbance

    Science.gov (United States)

    Bhattacharjee, A.; Sutradhar, A.

    2012-12-01

    Modern close loop control for blood glucose level in a diabetic patient necessarily uses an explicit model of the process. A fixed parameter full order or reduced order model does not characterize the inter-patient and intra-patient parameter variability. This paper deals with a frequency domain nonparametric identification of the nonlinear glucose-insulin process in an insulin dependent diabetes mellitus patient that captures the process dynamics in presence of uncertainties and parameter variations. An online frequency domain kernel estimation method has been proposed that uses the input-output data from the 19th order first principle model of the patient in intravenous route. Volterra equations up to second order kernels with extended input vector for a Hammerstein model are solved online by adaptive recursive least square (ARLS) algorithm. The frequency domain kernels are estimated using the harmonic excitation input data sequence from the virtual patient model. A short filter memory length of M = 2 was found sufficient to yield acceptable accuracy with lesser computation time. The nonparametric models are useful for closed loop control, where the frequency domain kernels can be directly used as the transfer function. The validation results show good fit both in frequency and time domain responses with nominal patient as well as with parameter variations.

  11. Parallel detection of antigen-specific T cell responses by combinatorial encoding of MHC multimers

    DEFF Research Database (Denmark)

    Andersen, Rikke Sick; Kvistborg, Pia; Frøsig, Thomas Mørch;

    2012-01-01

    -dimensional combinatorial matrix, these eight fluorochromes are combined to generate 28 unique two-color codes. By the use of combinatorial encoding, a large number of different T cell populations can be detected in a single sample. The method can be used for T cell epitope mapping, and also for the monitoring of CD8...

  12. Data analysis as a source of variability of the HLA-peptide multimer assay

    DEFF Research Database (Denmark)

    Gouttefangeas, Cécile; Chan, Cliburn; Attig, Sebastian

    2015-01-01

    Multiparameter flow cytometry is an indispensable method for assessing antigen-specific T cells in basic research and cancer immunotherapy. Proficiency panels have shown that cell sample processing, test protocols and data analysis may all contribute to the variability of the results obtained by ....... We show that this automated method can circumvent difficulties inherent to manual gating strategies and is broadly applicable for experiments performed with heterogeneous protocols and reagents.......Multiparameter flow cytometry is an indispensable method for assessing antigen-specific T cells in basic research and cancer immunotherapy. Proficiency panels have shown that cell sample processing, test protocols and data analysis may all contribute to the variability of the results obtained...... by laboratories performing ex vivo T cell immune monitoring. In particular, analysis currently relies on a manual, step-by-step strategy employing serial gating decisions based on visual inspection of one- or two-dimensional plots. It is therefore operator dependent and subjective. In the context of continuing...

  13. Experimental and Theoretical Investigation of Sodiated Multimers of Steroid Epimers with Ion Mobility-Mass Spectrometry

    Science.gov (United States)

    Chouinard, Christopher D.; Cruzeiro, Vinícius Wilian D.; Roitberg, Adrian E.; Yost, Richard A.

    2017-02-01

    Ion mobility-mass spectrometry (IM-MS) has recently seen increased use in the analysis of small molecules, especially in the field of metabolomics, for increased breadth of information and improved separation of isomers. In this study, steroid epimers androsterone and trans-androsterone were analyzed with IM-MS to investigate differences in their relative mobilities. Although sodiated monomers exhibited very similar collision cross-sections (CCS), baseline separation was observed for the sodiated dimer species (RS = 1.81), with measured CCS of 242.6 and 256.3 Å2, respectively. Theoretical modeling was performed to determine the most energetically stable structures of solution-phase and gas-phase monomer and dimer structures. It was revealed that these epimers differ in their preferred dimer binding mode in solution phase: androsterone adopts a R=O - Na+ - OH—R' configuration, whereas trans-androsterone adopts a R=O - Na+ - O=R' configuration. This difference contributes to a significant structural variation, and subsequent CCS calculations based on these structures relaxed in the gas phase were in agreement with experimentally measured values (ΔCCS 5%). Additionally, these calculations accurately predicted the relative difference in mobility between the epimers. This study illustrates the power of combining experimental and theoretical results to better elucidate gas-phase structures.

  14. Theranostic Value of Multimers: Lessons Learned from Trimerization of Neurotensin Receptor Ligands and Other Targeting Vectors

    Directory of Open Access Journals (Sweden)

    Simone Maschauer

    2017-03-01

    Full Text Available Neurotensin receptor 1 (NTS1 is overexpressed on a variety of cancer entities; for example, prostate cancer, ductal pancreatic adenocarcinoma, and breast cancer. Therefore, it represents an interesting target for the diagnosis of these cancers types by positron emission tomography (PET [...

  15. Branca de Neve multim?dia: a personagem na literatura, no cinema e nos quadrinhos

    OpenAIRE

    Miranda., Allana Dilene de Ara?jo de

    2011-01-01

    Objetivando estudar a categoria personagem e sua manifesta??o em tr?s diferentes m?dias, este trabalho analisa Branca de Neve e sua constru??o na literatura, no cinema, e nas hist?rias em quadrinhos. O corpus utilizado foi o conto Branca de Neve e os sete an?es, assinado pelos irm?os Wilhelm e Jacob Grimm; a anima??o de 1937, produzida pelos est?dios Disney, hom?nima; e o primeiro volume da miniss?rie As mil e uma noites, derivada da revista mensal F?bulas, de Bill Willingham. Nos tr?s primei...

  16. Form and Function—An Overview

    Institute of Scientific and Technical Information of China (English)

    李艳

    2012-01-01

      Long before, the research of form has already entered its heyday, but the study of function is a somewhat new branch of language study. This essay is an attempt to take a brief look at the most significant distinction between“form and function”, and then aims at making clear the definition of“form and function”in discourse analysis.

  17. Matlab Code for Sorted Real Schur Forms

    NARCIS (Netherlands)

    Brandts, J.H.

    2001-01-01

    In Matlab, there exists a standard command to generate a real Schur form, and another command transforms a real Schur form into a complex one. In Golub and Van Loan (1996), a Matlab-like routine is sketched that sorts a complex Schur form: given a target value ? in the complex plane, the diagonal el

  18. 7 CFR 2902.46 - Forming lubricants.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Forming lubricants. 2902.46 Section 2902.46... Items § 2902.46 Forming lubricants. (a) Definition. Products designed to provide lubrication during... forming lubricants. By that date, Federal agencies that have the responsibility for drafting or...

  19. 30 CFR 256.49 - Lease form.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Lease form. 256.49 Section 256.49 Mineral... IN THE OUTER CONTINENTAL SHELF Issuance of Leases § 256.49 Lease form. Oil and gas leases and leases for sulphur shall be issued on forms approved by the Director. Other mineral leases shall be issued...

  20. 30 CFR 281.22 - Lease form.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Lease form. 281.22 Section 281.22 Mineral... OIL, GAS, AND SULPHUR IN THE OUTER CONTINENTAL SHELF Leasing Procedures § 281.22 Lease form. The OCS mineral leases shall be issued on the lease form prescribed by the Secretary in the leasing notice....

  1. Utilize Vacuum Forming to Make Interdisciplinary Connections

    Science.gov (United States)

    Love, Tyler S.; Valenza, Frank

    2011-01-01

    The concept of vacuum forming has been around since the 19th century, despite not being fully utilized in industry until the 1950s. In the past, industrial arts classes have used vacuum-forming projects to concentrate solely on the manufacturing process and the final product. However, vacuum forming is not just an old industrial arts activity; it…

  2. 13 CFR 108.100 - Business form.

    Science.gov (United States)

    2010-01-01

    ...) PROGRAM Qualifications for the NMVC Program Organizing A Nmvc Company § 108.100 Business form. A NMVC Company must be a newly formed for-profit entity or, subject to § 108.150, a newly formed for-profit subsidiary of an existing entity. It must be organized under State law solely for the purpose of performing...

  3. Rolling and Forming of Thorium Metal

    Energy Technology Data Exchange (ETDEWEB)

    Calabra, A. E.

    1961-05-02

    One vacuum induction melted and cast nuclear grade thorium ingot was satisfactorily rolled and formed into a hemispherical shape. Attempts to roll and form two vacuum induction melted and cast alloy grade thorium ingots were not successful. Rolling and forming procedures are described and metallurgical evaluation is reported.

  4. 7 CFR 1280.625 - Certification and referendum form ballot form.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Certification and referendum form ballot form. 1280... LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Procedures To Request a Referendum Definitions § 1280.625 Certification and referendum form ballot form. Form LS-86 shall be used to vote in the referendum...

  5. 38 CFR Appendix A to Part 41 - Data Collection Form (Form SF-SAC)

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Data Collection Form (Form SF-SAC) A Appendix A to Part 41 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS.... Appendix A to Part 41—Data Collection Form (Form SF-SAC) Note: Data Collection Form SF-SAC and...

  6. Experimental investigation of braided fabric forming

    Science.gov (United States)

    Wang, Peng; Soulat, Damien; Legrand, Xavier; Zemni, Lilia; Jacquot, Pierre-Baptiste

    2016-10-01

    Woven and braided textile structures are largely used as the composite reinforcements. Forming of the continuous fibre reinforcements and thermoplastic resin commingled yarns can be performed at room temperature. The "cool" forming stage is well-controlled and more economical compared to thermoforming. Many studies have been addressed for carbon and glass fibres / thermoplastic commingled yarns reinforced composite forming for woven structure. On the contrary, few research works has deal with the natural fibre reinforced textile forming and none concerns the braided fabrics forming. In this present work, the Flax/Polyamide 12 commingled yarns are used to produce braided fabric and then to analyze their deformability behaviour.

  7. New Forming Technologies for Autobody at POSCO

    Science.gov (United States)

    Lee, Hong-Woo; Cha, Myung-Hwan; Choi, Byung-Keun; Kim, Gyo-Sung; Park, Sung-Ho

    2011-08-01

    As development of car body with light weight and enhanced safety became one of the hottest issues in the auto industry, the advanced high strength steels have been broadly applied to various automotive parts over the last few years. Corresponding to this trend, POSCO has developed various types of cold and hot rolled AHSSs such as DP, TRIP, CP and FB, and continues to develop new types of steel in order to satisfy the requirement of OEMs more extensively. To provide optimal technical supports to customers, POSCO has developed more advanced EVI concept, which includes the concept of CE/SE, VA/VE, VI and PP as well as the conventional EVI strategy. To realize this concept, POSCO not only supports customers with material data, process guideline, and evaluation of formability, weld-ability, paint-ability and performance but also provides parts or sub-assemblies which demand highly advanced technologies. Especially, to accelerate adoption of AHSS in autobody, POSCO has tried to come up with optimal solutions to AHSS forming. Application of conventional forming technologies has been restricted more and more by relatively low formability of AHSS with high tensile-strength. To overcome the limitation in the forming, POSCO has recently developed new forming technologies such as hydro-forming, hot press forming, roll forming and form forming. In this paper, tailored strength HPF, hydroformed torsion beam axle and multi-directional roll forming are introduced as examples of new forming technologies.

  8. Combining Explicit- Implicit with Focus on Form - Focus on FormS Feedback in EFL Learners' Written Task Accuracy

    Directory of Open Access Journals (Sweden)

    Asghar Salimi

    2015-11-01

    Full Text Available A number of studies has investigated whether definite types of written corrective feedback combinations of different types are more beneficial  than others. It seems that teaching writing and giving feedback to students’ written task accuracy is an important task for teachers, so this study tried to investigate the effects of different types of feedback (implicit focus on form, explicit focus on form and explicit focus on forms on EFL learners’ writing. For this purpose, 45 learners of a total number of 90 low intermediate learners studying at Meraj high school in Ardabil were chosen based on their placement test. Initially to make sure that subjects were homogenous, all of them took the Nelson placement test. Results of the test indicated that all of the participation was homogenous. The 45 learners thus were  divided into three groups and each of the groups were received feedback through one of the three forms of  above mentioned At the end of the treatment, the participants in three groups were given a writing posttest. T-Tests and One-way ANOVA were used to test the hypotheses. The results of t-tests showed all types of feedback were effective in improving written accuracy and result of Anova (post hoc showed that there were significant differences between groups and explicit focus on form outperformed than other types of feedback. Keyword: implicit focus on form, explicit focus on form, explicit focus on formS, l2 writing performance at accuracy level

  9. FEM SIMULATION FOR LASER FORMING PROCESSING

    Institute of Scientific and Technical Information of China (English)

    L.Q. Li; Y.B. Chen; X. Y. Wang; S. Y. Lin

    2004-01-01

    Laser forming involves heating sheet metal workpiece along a certain path with a defocused laser beam directed irradiate to the surface. During laser forming, a transient temperature fields is caused by the irradiation and travelling of a laser beam.Consequently, thermal expansion and contraction take place, and allows the thermalmechanical forming of complex shapes. This is a new manufacturing technique that forming metal sheet only by thermal stress. Therefore, the analysis of temperature fields and stress fields are very useful for studying the forming mechanism and controlling the accuracy of laser forming. The non-liner finite element solver, MARC, is employed to solve the thermal-mechanical analysis. Using this model, the stress and strain distribution of pure aluminum plate with different thickness are analyzed. The influence of scanning speed on temperature fields and plastic strain of metal sheet under the condition of constant line energy are also presented. Numerical results agree well with the experimental results.

  10. Disjoint sum forms in reliability theory

    Directory of Open Access Journals (Sweden)

    B. Anrig

    2014-01-01

    Full Text Available The structure function f of a binary monotone system is assumed to be known and given in a disjunctive normal form, i.e. as the logical union of products of the indicator variables of the states of its subsystems. Based on this representation of f, an improved Abraham algorithm is proposed for generating the disjoint sum form of f. This form is the base for subsequent numerical reliability calculations. The approach is generalized to multivalued systems. Examples are discussed.

  11. Trichomonas tenax: ultrastructure of giant forms.

    Science.gov (United States)

    Ribaux, C L; Joffre, A; Magloire, H

    1988-03-01

    Trichomonas tenax is a parasitic flagellate of the human mouth. The morphology and the ultrastructure of the protozoan are identical to those of other trichomonads. Giant forms suddenly appeared in a strain maintained in culture for two years. The structure and the ultrastructure of these abnormal forms were studied at the light and electron microscope level. Several nuclei, groups of flagella, undulating membranes and Golgi complexes were observed. The significance of these forms is still unknown.

  12. Ladder Forms in Estimation and System Identification.

    Science.gov (United States)

    1977-01-01

    system identification . Many record applications, such as in geophysical signal processing, high resolution (’maximum entropy’) spectral estimation and speech encoding, justify the interest in these forms. They appear in many contexts, such as scattering and network theory and the theory of orthogonal polynomials. The state-space model ladder realizations are very closely related in (block) Schwarz matrix canonical forms, which generally appear in the context of stability analysis. In fact they are the natural ’stability canonical form’ for

  13. The 3-form multiplet in supergravity

    CERN Document Server

    Binétruy, Pierre; Girardi, G; Grimm, R

    1996-01-01

    We derive the couplings of the 3-form supermultiplet to the general supergravity-matter-Yang-Mills system. Based on the methods of superspace geometry, we identify component fields, establish their supergravity transformations and construct invariant component field actions. Two specific applications are adressed: the appearance of fundamental 3-forms in the context of strong-weak duality and the use of the 3-form supermultiplets to describe effective degrees of freedom relevant to the mechanism of gaugino condensation.

  14. On extensions of local Dirichlet forms

    OpenAIRE

    Robinson, Derek W.

    2016-01-01

    Let $\\ce$ be a Dirichlet form on $L_2(X\\,;\\mu)$ where $(X,\\mu)$ is locally compact $\\sigma$-compact measure space. Assume $\\ce$ is inner regular, i.e.\\ regular in restriction to functions of compact support, and local in the sense that $\\ce(\\varphi,\\psi)=0$ for all $\\varphi, \\psi\\in D(\\ce)$ with $\\varphi\\,\\psi=0$. We construct two Dirichlet forms $\\ce_m$ and $\\ce_M$ such that $\\ce_m\\leq \\ce\\leq \\ce_M$. These forms are potentially the smallest and largest such Dirichlet forms. In particular $\\...

  15. Review on Cold-Formed Steel Connections

    Science.gov (United States)

    Tan, Cher Siang; Mohammad, Shahrin; Md Tahir, Mahmood; Shek, Poi Ngian

    2014-01-01

    The concept of cold-formed light steel framing construction has been widespread after understanding its structural characteristics with massive research works over the years. Connection serves as one of the important elements for light steel framing in order to achieve its structural stability. Compared to hot-rolled steel sections, cold-formed steel connections perform dissimilarity due to the thin-walled behaviour. This paper aims to review current researches on cold-formed steel connections, particularly for screw connections, storage rack connections, welded connections, and bolted connections. The performance of these connections in the design of cold-formed steel structures is discussed. PMID:24688448

  16. The geometry of spherical space form groups

    CERN Document Server

    Gilkey, Peter B

    1989-01-01

    In this volume, the geometry of spherical space form groups is studied using the eta invariant. The author reviews the analytical properties of the eta invariant of Atiyah-Patodi-Singer and describes how the eta invariant gives rise to torsion invariants in both K-theory and equivariant bordism. The eta invariant is used to compute the K-theory of spherical space forms, and to study the equivariant unitary bordism of spherical space forms and the Pin c and Spin c equivariant bordism groups for spherical space form groups. This leads to a complete structure theorem for these bordism and K-theor

  17. On the Notion of Logical Form

    Institute of Scientific and Technical Information of China (English)

    林允清

    2014-01-01

    The notion of logical form plays a central role in the philosophy of language and in linguistics . But what logical form is has not been clear . In this paper I first survey the uses of logical form , and show that this notion has no well-defined meaning . I then discuss three main motivations behind invoking logical form , and argue that two of them are unwarranted , and the third can be satisfied by an approach to the logic of ordinary language that is based on the idea of sentence frames , rather than on the traditional idea of subject and predicate .

  18. Collective form generation through visual participatory representation

    DEFF Research Database (Denmark)

    Day, Dennis; Sharma, Nishant; Punekar, Ravi

    2012-01-01

    In order to inspire and inform designers with the users data from participatory research, it may be important to represent data in a visual format that is easily understandable to the designers. For a case study in vehicle design, the paper outlines visual representation of data and the use...... information from participatory research takes a form manifestation in collective form conceptualization by a set of designers....... of the same in the collective form generation session with a set of designers (vehicle design students) where designers use sketching as a tool to discuss, conceptualise and negotiate concepts towards the final vehicle form. Further, this paper attempts to demonstrate how deep and tacit context sensitive...

  19. Soliton form factors from lattice simulations

    CERN Document Server

    Rajantie, Arttu

    2010-01-01

    The form factor provides a convenient way to describe properties of topological solitons in the full quantum theory, when semiclassical concepts are not applicable. It is demonstrated that the form factor can be calculated numerically using lattice Monte Carlo simulations. The approach is very general and can be applied to essentially any type of soliton. The technique is illustrated by calculating the kink form factor near the critical point in 1+1-dimensional scalar field theory. As expected from universality arguments, the result agrees with the exactly calculable scaling form factor of the two-dimensional Ising model.

  20. Synthesis and evaluation of cholecystokinin trimers: a multivalent approach to pancreatic cancer detection and treatment.

    Science.gov (United States)

    Brabez, Nabila; Nguyen, Kevin L; Saunders, Kara; Lacy, Ryan; Xu, Liping; Gillies, Robert J; Lynch, Ronald M; Chassaing, Gerard; Lavielle, Solange; Hruby, Victor J

    2013-04-15

    In the quest for novel tools for early detection and treatment of cancer, we propose the use of multimers targeting overexpressed receptors at the cancer cell surface. Indeed, multimers are prone to create multivalent interactions, more potent and specific than their corresponding monovalent versions, thus enabling the potential for early detection. There is a lack of tools for early detection of pancreatic cancer, one of the deadliest forms of cancer, but CCK2-R overexpression on pancreatic cancer cells makes CCK based multimers potential markers for these cells. In this Letter, we describe the synthesis and evaluation of CCK trimers targeting overexpressed CCK2-R.

  1. 46 CFR 308.548 - Standard form of underwriting agency agreement for cargo, Form MA-318.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Standard form of underwriting agency agreement for cargo, Form MA-318. 308.548 Section 308.548 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... underwriting agency agreement for cargo, Form MA-318. This form, which may be obtained from the American...

  2. 48 CFR 1913.505-2 - Board order forms in lieu of Optional and Standard Forms.

    Science.gov (United States)

    2010-10-01

    ... PURCHASE PROCEDURES Purchase Orders 1913.505-2 Board order forms in lieu of Optional and Standard Forms. (a...-case basis, in order to accommodate computer-generated purchase order forms. Exception approval for... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Board order forms in...

  3. 76 FR 36620 - Proposed Collection; Comment Request for Form 8453-F and Form 8879-F

    Science.gov (United States)

    2011-06-22

    ... Internal Revenue Service Proposed Collection; Comment Request for Form 8453-F and Form 8879-F AGENCY... U.S.C. 3506(c)(2)(A)). Currently, the IRS is soliciting comments concerning Form 8453-F, U.S. Estate of Trust Income Tax Declaration and Signature for Electronic and Magnetic Made Filing and Form 8879-F...

  4. Correlation between arch form and facial form: A cross sectional study

    Directory of Open Access Journals (Sweden)

    Sanjna Nayar

    2015-01-01

    Full Text Available Arch form is a key determinant in teeth position. Teeth selection and placement must be based on the functional and esthetic needs of the patient. Keeping in mind, the biomechanics involved with the prosthesis. The aim of the study was to evaluate the correlation between arch form and facial form. About 40 individuals in the age group of 20-25 years were involved in the study. The arch form and facial form were analyzed statistically to check for any correlation. It was found that, 63.63% of leptoprosophic individuals had squarish arch form while, 54.6% of mesoprosophic faces had ovoid arch form.

  5. NC INCREMENTAL SHEET METAL FORMING PROCESS AND VERTICAL WALL SQUARE BOX FORMING

    Institute of Scientific and Technical Information of China (English)

    Zhou Liuru; Mo Jianhua; Xiao Xiangzhi

    2004-01-01

    The forming principle and deformation analysis of NC incremental sheet metal forming process as well as the process planning, experiment and key process parameters of vertical wall square box forming are presented. Because the deformation of sheet metal only occurs around the tool head and the deformed region is subjected to stretch deformation, the deformed region of sheet metal thins, and surface area increases. Sheet metal forming stepwise is to lead to the whole sheet metal deformation. The forming half-apex angle θ and corner radius R are the main process parameters in NC incremental forming of vertical wall square box. According to sine law, a vertical wall square box can't be formed by NC incremental sheet metal forming process in a single process, rather, it must be formed in multi processes. Thus, the parallel line type tool path process method is presented to form the vertical wall square box, and the experiment and analysis are made to verify it.

  6. Information Technology and New Forms of Organisations.

    Science.gov (United States)

    Ghasemiyeh, Rahim; Li, Feng

    This paper evaluates the impacts of the Internet on organizational structures and identifies new forms of organizations in light of information technology (IT) advances. Four traditional forms of organizations are summarized, i.e., the bureaucratic hierarchy, the entrepreneurial organization, the matrix organization, and the adhocacy. The…

  7. Binary Quadratic Forms: A Historical View

    Science.gov (United States)

    Khosravani, Azar N.; Beintema, Mark B.

    2006-01-01

    We present an expository account of the development of the theory of binary quadratic forms. Beginning with the formulation and proof of the Two-Square Theorem, we show how the study of forms of the type x[squared] + ny[squared] led to the discovery of the Quadratic Reciprocity Law, and how this theorem, along with the concept of reduction relates…

  8. Algebra and Arithmetic of Modular Forms

    DEFF Research Database (Denmark)

    Rustom, Nadim

    In [Rus14b] and [Rus14a], we study graded rings of modular forms over congruence subgroups, with coefficients in subrings A of C, and determine bounds of the weights of modular forms constituting a minimal set of generators, as well as on the degree of the generators of the ideal of relations bet...

  9. Separation Of Form Perception And Stereopsis

    Science.gov (United States)

    Piantanida, Thomas P.; Hammon, Robert W.

    1987-06-01

    This study addresses the question of whether static and dynamic stereopsis require the perception of form. The retinal image requirements of the visual mechanisms subserving form perception and stereopsis are not only distinct but potentially antagonistic. Form perception requires the retinal image to have luminance gradients that are steep enough to produce suprathreshold temporal transients in the receptors during normal eye movements. Stereopsis, on the other hand, requires identification of corresponding luminance gradients in the two retinal images so that their retinal disparity can be calculated. Thus, while the motion of the retinal image caused by normal eye movements is essential to form perception, it may be detrimental to stereopsis. We eliminated the motion of the retinal image that would normally have occurred during eye movements by using a pair of SRI dual-Purkinje-image eyetrackers and stimulus deflectors to stabilize the retinal images of selected form elements. We examined the thresholds for perceiving motion in depth under stabilized and unstabilized conditions and found that the perception of motion in depth continues in the absence of monocular form perception. Likewise, when we stabilized the disparate images of a line stereogram, stereopsis persisted in the absence of form perception of those elements whose retinal disparity deter-mined their perceived depth. These results imply profound separation of the form-perception and stereopsis mechanisms.

  10. On Learning Language Form and Language Function.

    Science.gov (United States)

    Bialystok, Ellen

    An observable feature of learner language, linguistic variability, is described and used as the basis for speculating about an aspect of the process of second language learning. It is hypothesized that variation in correct use of target language forms varies as a function of the demands placed on the learner to produce these forms. Three groups of…

  11. Charge-symmetry-breaking nucleon form factors

    CERN Document Server

    Kubis, Bastian

    2009-01-01

    A quantitative understanding of charge-symmetry breaking is an increasingly important ingredient for the extraction of the nucleon's strange vector form factors. We review the theoretical understanding of the charge-symmetry-breaking form factors, both for single nucleons and for Helium-4.

  12. FormCalc 9 and Extensions

    Science.gov (United States)

    Hahn, T.; Paβehr, S.; Schappacher, C.

    2016-10-01

    We present Version 9 of the Feynman-diagram calculator FormCalc and a flexible new suite of shell scripts and Mathematica packages based on FormCalc, which can be adapted and used as a template for calculations. Report DESY 2016-060, MPP-2016-63

  13. [Pharmaceutical advice concerning different pharmaceutical dosage forms].

    Science.gov (United States)

    Szakonyi, Gergely; Zelkó, Romána

    2010-01-01

    The present paper summarizes the commonly applied types of drug uptake and the pharmacists' advice concerning a certain dosage form. The manuscript also deals with the modified release dosage forms and their abbreviations in the name of the marketing authorized products.

  14. Lubricant Test Methods for Sheet Metal Forming

    DEFF Research Database (Denmark)

    Bay, Niels; Olsson, David Dam; Andreasen, Jan Lasson

    2008-01-01

    Sheet metal forming of tribologically difficult materials such as stainless steel, Al-alloys and Ti-alloys or forming in tribologically difficult operations like ironing, punching or deep drawing of thick plate requires often use of environmentally hazardous lubricants such as chlorinated paraffin...

  15. Major and minor form of hereditary hyperekplexia

    NARCIS (Netherlands)

    Tijssen, MAJ; Vergouwe, MN; van Dijk, JG; Rees, M; Frants, RR; Brown, P

    2002-01-01

    Hyperekplexia is a hereditary neurological disorder characterized by excessive startle responses. Within the disorder two clinical forms can be distinguished. The major form is characterized by continuous generalized stiffness in the first year of life and an exaggerated startle reflex, accompanied

  16. RASD's New Interlibrary Reference Request Form.

    Science.gov (United States)

    American Libraries, 1985

    1985-01-01

    Introduces information request form developed by Cooperative Reference Services Committee of American Library Association's Reference and Adult Services Division to be used whenever a library cannot supply information requested by a patron and would like to ask another library for assistance. Front of proposed form with sample question is shown.…

  17. Exterior Powers of Symmetric Bilinear Forms

    Institute of Scientific and Technical Information of China (English)

    Seán McGarraghy

    2002-01-01

    We study exterior powers of classes of symmetric bilinear forms in the Witt-Grothendieck ring of a field of characteristic not equal to 2, and derive their basic properties. The exterior powers are used to obtain annihilating polynomials for quadratic forms in the Witt ring.

  18. Symmetric Powers of Symmetric Bilinear Forms

    Institute of Scientific and Technical Information of China (English)

    Se(a)n McGarraghy

    2005-01-01

    We study symmetric powers of classes of symmetric bilinear forms in the Witt-Grothendieck ring of a field of characteristic not equal to 2, and derive their basic properties and compute their classical invariants. We relate these to earlier results on exterior powers of such forms.

  19. Calculation of Nucleon Electromagnetic Form Factors

    CERN Document Server

    Renner, D B; Dolgov, D S; Eicker, N; Lippert, T; Negele, J W; Pochinsky, A V; Schilling, K; Lippert, Th.

    2002-01-01

    The fomalism is developed to express nucleon matrix elements of the electromagnetic current in terms of form factors consistent with the translational, rotational, and parity symmetries of a cubic lattice. We calculate the number of these form factors and show how appropriate linear combinations approach the continuum limit.

  20. Teaching Students to Form Effective Questions

    Science.gov (United States)

    Stafford, Tish

    2009-01-01

    The ability to question lies at the heart of human curiosity and is a necessary component of cognition. The author stresses that forming questions is essential to human thought and communication. As such, forming questions is a foundational process that cuts across curricular areas and is embedded in content standards across the nation, including…

  1. Forms of Address in Chilean Spanish

    Science.gov (United States)

    Bishop, Kelley; Michnowicz, Jim

    2010-01-01

    The present investigation examines possible social and linguistic factors that influence forms of address used in Chilean Spanish with various interlocutors. A characteristic of the Spanish of Chile is the use of a variety of forms of address for the second person singular, "tu", "vos", and "usted", with corresponding…

  2. Are All Forms of Scholarship Considered Equal?

    Science.gov (United States)

    Ward, Chris; Carrigan, Martin

    2009-01-01

    Boyer's four forms of scholarship were detailed in his 1990 book Scholarship Reconsidered: Priorities of the Professoriate. In the 18 years since publication of that book, universities struggle with changing the promotion and tenure criteria to include all four forms of scholarship. Faculty members often focus on publications as they prepare for…

  3. Professionalism as a Form of Work Commitment.

    Science.gov (United States)

    Morrow, Paula C.; Goetz, Joe F., Jr.

    1988-01-01

    Evaluated concept of professionalism as a form of work commitment using a modified version of Hall's (1968) multidimensional measure of professionalism on 325 accountants in public practice. Examined three forms of work commitment--job involvement, organizational commitment, and work ethic endorsement--and four professional behaviors. Suggests the…

  4. Multiscale friction modeling for sheet metal forming

    NARCIS (Netherlands)

    Hol, J.; Cid Alfaro, M.V.; de Rooij, Matthias B.; Meinders, Vincent T.; Felder, Eric; Montmitonnet, Pierre

    2010-01-01

    The most often used friction model for sheet metal forming simulations is the relative simple Coulomb friction model. This paper presents a more advanced friction model for large scale forming simulations based on the surface change on the micro-scale. The surface texture of a material changes when

  5. The Killing Forms of Lie Triple Systems

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhi Xue; GAO Rui

    2009-01-01

    For Lie triple systems in the characteristic zero setting, we obtain by means of the Killing forms two criterions for semisimplicity and for solvability respectively, and then investigate the relationship among the Killing forms of a real Lie triple system To, the complexification T of To, and the realification of T.

  6. The rare histological forms of gallbladder cancer

    OpenAIRE

    Lytvynenko M.V.; Rosha L.G.; Chetverykov S.G.; Vododuk V.U.; Sherstiuk S.A.; Katsap A.V.

    2011-01-01

    In the practice of surgeons meet the rare forms of gallbladder cancer, with atypical clinical course. The aim of ourinvestigation was revealed peculiarity of clinical display the rarely forms of gallbladder cancer. According to literaturesquamous cell carcinoma found in the gallbladder in 7% case.

  7. Formulas in Physics Have a "Standard" Form

    Science.gov (United States)

    Moelter, Matthew J.; Jackson, Martin

    2012-01-01

    We discuss the importance of the ordering of symbols in physics formulas and identify implicit conventions that govern the "standard" form for how formulas are written and interpreted. An important part of writing and reading this form is understanding distinctions among constants, parameters, and variables. We delineate these conventions and…

  8. Closed forms and multi-moment maps

    DEFF Research Database (Denmark)

    Madsen, Thomas Bruun; Swann, Andrew Francis

    2013-01-01

    We extend the notion of multi-moment map to geometries defined by closed forms of arbitrary degree. We give fundamental existence and uniqueness results and discuss a number of essential examples, including geometries related to special holonomy. For forms of degree four, multi-moment maps are gu...

  9. Forms of vitality play in infancy.

    Science.gov (United States)

    Español, Silvia; Martínez, Mauricio; Bordoni, Mariana; Camarasa, Rosario; Carretero, Soledad

    2014-12-01

    In this paper we report a qualitative study based on the constant comparative method to initiate the systematic study of forms of vitality play. This is an unnoticed non-figurative play frame linked to early social play and temporal arts in which child and adult elaborate the dynamics of their own movements and sounds in a repetition-variation form. In the introduction we present the theoretical underpinnings and the sporadic observations we have done in previous studies. Then, by the iterative observations of the recorded material of a longitudinal case study on play during the third year of life, we generated the general category of forms of vitality play and four subcategories of display modes of forms of vitality play (improvised forms of vitality play, ritualized forms of vitality play, forms of vitality play combined with pretend play, and forms of vitality play combined with role playing) which are illustrated with descriptive narratives. We discuss the properties of the developed categories, the limits of the present study, and the need to continue systematizing the research on this playful activity.

  10. Ceramic and glass radioactive waste forms

    Energy Technology Data Exchange (ETDEWEB)

    Readey, D.W.; Cooley, C.R. (comps.)

    1977-01-01

    This report contains 14 individual presentations and 6 group reports on the subject of glass and polycrystalline ceramic radioactive waste forms. It was the general consensus that the information available on glass as a waste form provided a good basis for planning on the use of glass as an initial waste form, that crystalline ceramic forms could also be good waste forms if much more development work were completed, and that prediction of the chemical and physical stability of the waste form far into the future would be much improved if the basic synergistic effects of low temperature, radiation and long times were better understood. Continuing development of the polycrystalline ceramic forms was recommended. It was concluded that the leach rate of radioactive species from the waste form is an important criterion for evaluating its suitability, particularly for the time period before solidified waste is permanently placed in the geologic isolation of a Federal repository. Separate abstracts were prepared for 12 of the individual papers; the remaining two were previously abstracted.

  11. Dirichlet Form of Product of Variational Fractals

    Institute of Scientific and Technical Information of China (English)

    刘源

    2003-01-01

    Much effort has gone into constructing Dirichlet forms to define Laplacians on self-similar sets. However, the results have only been successful on p.c.f. (post critical finite) fractals. We prove the existence of a Dirichlet form on a class of non-p.c.f. sets that are the product of variational fractals.

  12. 7 CFR 29.6016 - Form.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Form. 29.6016 Section 29.6016 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Standards Definitions § 29.6016 Form. The stage of preparation of tobacco such as stemmed...

  13. The cactus rank of cubic forms

    CERN Document Server

    Bernardi, Alessandra

    2011-01-01

    We prove that the smallest degree of an apolar 0-dimensional scheme to a general cubic form in $n+1$ variables is at most $2n+2$, when $n\\geq 8$, and therefore smaller than the rank of the form. When n=8 we show that the bound is sharp, i.e. the smallest degree of an apolar subscheme is 18.

  14. Algebra and Arithmetic of Modular Forms

    DEFF Research Database (Denmark)

    Rustom, Nadim

    In [Rus14b] and [Rus14a], we study graded rings of modular forms over congruence subgroups, with coefficients in subrings A of C, and determine bounds of the weights of modular forms constituting a minimal set of generators, as well as on the degree of the generators of the ideal of relations bet...

  15. 20 CFR 703.2 - Forms.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Forms. 703.2 Section 703.2 Employees...' COMPENSATION ACT AND RELATED STATUTES INSURANCE REGULATIONS General § 703.2 Forms. (a) Any information required... OWCP district offices and on the Internet at http://www.dol.gov/esa/owcp/dlhwc/lsforms.htm....

  16. Linguistique modulaire : de la forme au sens

    DEFF Research Database (Denmark)

    Nølke, Henning

    Bogen foreslår en modulær sprogbeskrivelsesmodel, der kan beskrive og forklare den sproglige form og samtidig gøre rede for dannelsen af betydning ud fra denne form eller struktur. Den grundlæggende idé er at bevare det globale overblik over sprogets natur, og det teoretiske grundsynspunkt er kun...

  17. Re-discovering an Organizational Form

    DEFF Research Database (Denmark)

    Leixnering, Stephan; Meyer, Renate

    The corporation is the iconic emblem of modern capitalism. While the corporate form is today widely perceived as an instrument to maximize shareholder value, its institutionalization as an organizational form heavily built on the orientation towards public interests as a constitutive element...

  18. Star-Forming Complexes in Galaxies

    CERN Document Server

    Elmegreen, B G

    2004-01-01

    Star complexes are the largest globular regions of star formation in galaxies. If there is a spiral density wave, nuclear ring, tidal arm, or other well-defined stellar structure, then gravitational instabilities in the gaseous component produce giant cloud complexes with a spacing of about three times the width. These gas complexes form star complexes, giving the familiar beads on a string of star formation along spiral arms, or nuclear hotspots in the case of a ring. Turbulence compression, supernovae, and self-gravitational contraction inside the giant clouds produce a nearly scale-free structure, including giant molecular clouds that form OB associations and molecular cloud cores that form clusters. Without stellar density waves or similar structures, random gravitational instabilities form flocculent spirals and these fragment into star complexes, OB associations and star clusters in the same way. The largest coherent star-forming regions are the flocculent arms themselves. At the core of the hierarchy a...

  19. Automorphic forms with singularities on Grassmannians

    CERN Document Server

    Borcherds, R E

    1996-01-01

    We construct some families of automorphic forms on Grassmannians which have singularities along smaller sub Grassmannians, using a version of the theta correspondence extended to modular forms with poles at cusps. Some of the applications are as follows. We construct families of holomorphic automorphic forms which can be written as infinite products, which give many new examples of generalized Kac-Moody superalgebras. We extend the Shimura and Maass-Gritsenko correspondences to modular forms with singularities. We prove some congruences satisfied by the theta functions of positive definite lattices, and find a sufficient condition for a Lorentzian lattice to have a reflection group with a finite volume fundamental domain. We give some examples suggesting that these automorphic forms with singularities are related to Donaldson polynomials and to mirror symmetry for K3 surfaces.

  20. Composite materials formed with anchored nanostructures

    Science.gov (United States)

    Seals, Roland D; Menchhofer, Paul A; Howe, Jane Y; Wang, Wei

    2015-03-10

    A method of forming nano-structure composite materials that have a binder material and a nanostructure fiber material is described. A precursor material may be formed using a mixture of at least one metal powder and anchored nanostructure materials. The metal powder mixture may be (a) Ni powder and (b) NiAl powder. The anchored nanostructure materials may comprise (i) NiAl powder as a support material and (ii) carbon nanotubes attached to nanoparticles adjacent to a surface of the support material. The process of forming nano-structure composite materials typically involves sintering the mixture under vacuum in a die. When Ni and NiAl are used in the metal powder mixture Ni.sub.3Al may form as the binder material after sintering. The mixture is sintered until it consolidates to form the nano-structure composite material.

  1. Testing Forms in Web Applications Automatically

    Institute of Scientific and Technical Information of China (English)

    XU Lei; XU Baowen

    2006-01-01

    Forms enhance both the dynamic and interactive abilities of Web applications and the system complexity. And it is especially important to test forms completely and thoroughly. Therefore, this paper discusses how to carry out the form testing by different methods in the related testing phases. Namely, at first, automatically abstracting forms in the Web pages by parsing the HTML documents; then, obtaining the testing data with a certain strategies, such as by requirement specifications, by mining users' before input information or by recording mechanism; and next executing the testing actions automatically due to the well-formed test cases; finally, a case study is given to illustrate the convenient and effective of these methods.

  2. Superplasticity and superplastic forming of ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Nieh, T.G.; Wadsworth, J.

    1994-05-01

    Recent advances in the basic understanding of superplasticity and superplastic forming of ceramics are reviewed. Deformation mechanisms as well as microstructural requirements for superplastic ceramics are discussed. Microstructural effects, such as grain size, dynamic grain growth, and the presence of grain-boundary liquid phases, on the superplastic properties and deformation behavior of ceramics are addressed. Superplastic forming, and particularly biaxial gas-pressure forming, of several ceramics, including YTZP and Al{sub 2}O{sub 3}/YTZP, is also presented. The forming behavior of these ceramics is correlated with that obtained from conventional uniaxial tests. Examples of concurrent superplastic forming and diffusion bonding (SPF/DB) of metal-ceramic hybrids are given.

  3. Designing Anisotropic Inflation with Form Fields

    CERN Document Server

    Ito, Asuka

    2015-01-01

    We study inflation with anisotropic hair induced by form fields. In four dimensions, the relevant form fields are gauge (one-form) fields and two-form fields. Assuming the exponential form of potential and gauge kinetic functions, we find new exact power-law solutions endowed with anisotropic hair. We also explore the phase space of anisotropic inflation and find fixed points corresponding to the exact power-law solutions. Moreover, we perform the stability analysis around the fixed points to reveal the structure of the phase space. It turns out that one of the fixed points becomes an attractor and others (if any) are saddle points. In particular, the one corresponding to anisotropic inflation becomes an attractor when it exists. We also argue that various anisotropic inflation models can be designed by choosing coupling constants.

  4. Electrically assisted forming modeling and control

    CERN Document Server

    Salandro, Wesley A; Bunget, Cristina; Mears, Laine; Roth, John T

    2015-01-01

    Maximizing reader insights into the latest research findings and applications of Electrically-Assisted Forming (EAF) – whereby metals are formed under an electric current field – this book explains how such a process produces immediate improved formability of metals beyond the extent of thermal softening, and allows metals to be formed to greater elongation with lower mechanical energy as well as allowing for lightweight brittle metals such as magnesium and titanium to be formed without external heating or annealing, enabling the more effective use of these lightweight metals in design. Including case studies that illustrate and support the theoretical content and real-world applications of the techniques discussed, this book also serves to enrich readers understanding of the underlying theories that influence electro-plastic behaviour. The authors have extensive experience in studying Electrically-Assisted Forming and have written extensively on the topic with publications including experimental works, t...

  5. Disability and Bureaucratic Forms of Life

    Directory of Open Access Journals (Sweden)

    Thomas Abrams

    2015-06-01

    Full Text Available This paper employs a hybrid actor-network theory/phenomenological approach to a frequent bother in the lives of disabled persons: bureaucratic forms. I argue that these forms are key sites where disabled personhood emerges, something I examine through the lens of what philosopher Annemarie Mol calls ‘ontological politics’. To be disabled is to be entered into the bureaucratic form of life. These forms translate human existence into a categorize-able, transportable and combinable object, to be administered through ‘centers of calculation’. Combining Heidegger’s fundamental ontology with Latour’s theory of paperwork, I suggest that these forms represent disability in terms of ‘objective presence’, as a mere pre-existing thing, rather than a human way of being. I conclude with suggestions for further phenomenological research that takes embodied difference as its point of departure.

  6. Advanced waste forms from spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Ackerman, J.P.; McPheeters, C.C.

    1995-12-31

    More than one hundred spent nuclear fuel types, having an aggregate mass of more than 5000 metric tons (2700 metric tons of heavy metal), are stored by the United States Department of Energy. This paper proposes a method for converting this wide variety of fuel types into two waste forms for geologic disposal. The method is based on a molten salt electrorefining technique that was developed for conditioning the sodium-bonded, metallic fuel from the Experimental Breeder Reactor-II (EBR-II) for geologic disposal. The electrorefining method produces two stable, optionally actinide-free, high-level waste forms: an alloy formed from stainless steel, zirconium, and noble metal fission products, and a ceramic waste form containing the reactive metal fission products. Electrorefining and its accompanying head-end process are briefly described, and methods for isolating fission products and fabricating waste forms are discussed.

  7. Method of forming metal hydride films

    Science.gov (United States)

    Steinberg, R.; Alger, D. L.; Cooper, D. W. (Inventor)

    1977-01-01

    The substrate to be coated (which may be of metal, glass or the like) is cleaned, both chemically and by off-sputtering in a vacuum chamber. In an ultra-high vacuum system, vapor deposition by a sublimator or vaporizer coats a cooled shroud disposed around the substrate with a thin film of hydride forming metal which getters any contaminant gas molecules. A shutter is then opened to allow hydride forming metal to be deposited as a film or coating on the substrate. After the hydride forming metal coating is formed, deuterium or other hydrogen isotopes are bled into the vacuum system and diffused into the metal film or coating to form a hydride of metal film. Higher substrate temperatures and pressures may be used if various parameters are appropriately adjusted.

  8. Form Factors in radiative pion decay

    CERN Document Server

    Mateu, V

    2007-01-01

    We perform an analysis of the form factors that rule the structure-dependent amplitude in the radiative pion decay. The resonance contributions to pion -> e nu_e gamma decays are computed through the proper construction of the vector and axial-vector form factors by setting the QCD driven asymptotic properties of the three-point Green functions VVP and VAP, and by demanding the smoothing of the form factors at high transfer of momentum. A comparison between theoretical and experimental determinations of the form factors is also carried out. We also consider and evaluate the role played by a non-standard tensor form factor. We conclude that, at present and due to the hadronic incertitudes, the search for New Physics in this process is not feasible.

  9. Performance Test on Polymer Waste Form

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Se Yup [Korea Nuclear Engineering Co., Ltd, Seongnam (Korea, Republic of)

    2012-07-01

    Boric acid wastewater and spent ion exchange resins are generated as a low- and medium- level radioactive wastes from pressurized light water reactors. In Korea, boric acid wastewater is concentrated and dried in the form of granules, and finally solidified by using paraffin wax. In this study, polymer solidification was attempted to produce the stable waste form for the boric acid concentrates and the dewatered spent ion exchange resins. The polymer mixture which consists of epoxy resin, amine compounds and antimony trioxide was used to solidify the boric acid concentrates and the dewatered spent ion exchange resins. To evaluate the stability of polymer waste forms, a series of standardized performance tests was conducted. Also, by the requirement of the regulatory institute in Korea, an additional test was performed to estimate fire resistance and gas generation of the waste forms. A series of performance tests was conducted including compressive strength test, thermal stability test, irradiation stability test and biodegradation stability test, water immersion test, leach test, and free standing water for the polymer waste forms. In addition, a fire resistance test and an analysis of gas generation were performed on the waste forms by the requirement of the regulatory institute in Korea. From the results of the performance tests, it is believed that the polymer waste form is very stable and can satisfy the acceptance criteria for permanent disposal.

  10. Designing usable web forms- Empirical evaluation of web form improvement guidelines

    DEFF Research Database (Denmark)

    Seckler, Mirjam; Heinz, Silvia; Bargas-Avila, Javier A.

    2014-01-01

    This study reports a controlled eye tracking experiment (N = 65) that shows the combined effectiveness of 20 guidelines to improve interactive online forms when applied to forms found on real company websites. Results indicate that improved web forms lead to faster completion times, fewer form su...... submission trials, and fewer eye movements. Data from subjective questionnaires and interviews further show increased user satisfaction. Overall, our findings highlight the importance for web designers to improve their web forms using UX guidelines.......This study reports a controlled eye tracking experiment (N = 65) that shows the combined effectiveness of 20 guidelines to improve interactive online forms when applied to forms found on real company websites. Results indicate that improved web forms lead to faster completion times, fewer form...

  11. Separation energy dependence of hole form factors

    Energy Technology Data Exchange (ETDEWEB)

    Van de Wiele, J.; Langevin-Joliot, H. [Paris-11 Univ., 91 - Orsay (France). Inst. de Physique Nucleaire; Vdovin, A. [Joint Inst. for Nuclear Research, Dubna (Russian Federation). Bogoliubov Lab. of Theoretical Physics

    1996-04-01

    Form factors of fragmented hole states are studied within the quasiparticle-phonon model, using the inhomogeneous equation method. A systematic investigation of form factors is performed for neutron and proton hole states in the valence and first inner shells of {sup 208}Pb. Average characteristics are introduced for groups of levels, namely the mean form factors, summed source terms and correction potentials, and their behaviour is presented. The role of the relative values of the interaction radius parameter and binding well radius is discussed in details. (K.A.). 21 refs.; Submitted to Elsevier Science.

  12. Physicochemical interactions in solid dosage forms.

    Science.gov (United States)

    Narang, Ajit S; Desai, Divyakant; Badawy, Sherif

    2012-10-01

    Complete characterization and mechanistic understanding of physicochemical interactions in solid dosage forms are not only important for consistent manufacturability, stability, and bioavailability of the drug product, but are also expected under the quality-by-design paradigm of drug development. Lack of this understanding can impact successful and timely development, scale-up, and commercial manufacture of dosage forms. This article highlights the stability and bioavailability implications of physicochemical interactions in dosage forms citing a couple of examples where such interactions necessitated the recall of commercial drug products.

  13. On Laguerre Form and Laguerre Isoparametric Hypersurfaces

    Institute of Scientific and Technical Information of China (English)

    Jian Bo FANG

    2015-01-01

    Let x:M n−1→Rn be an umbilical free hypersurface with non-zero principal curvatures. M is called Laguerre isoparametric if it satisfies two conditions, namely, it has vanishing Laguerre form and has constant Lauerre principal curvatures. In this paper, under the condition of having constant Laguerre principal curvatures, we show that the hypersurface is of vanishing Laguerre form if and only if its Laguerre form is parallel with respect to the Levi–Civita connection of its Laguerre metric.

  14. Theory of Single Point Incremental Forming

    DEFF Research Database (Denmark)

    Martins, P.A.F.; Bay, Niels; Skjødt, Martin

    2008-01-01

    This paper presents a closed-form theoretical analysis modelling the fundamentals of single point incremental forming and explaining the experimental and numerical results available in the literature for the past couple of years. The model is based on membrane analysis with bi-directional in......-plane contact friction and is focused on the extreme modes of deformation that are likely to be found in single point incremental forming processes. The overall investigation is supported by experimental work performed by the authors and data retrieved from the literature....

  15. Molecular Packing in Network-Forming Collagens

    Directory of Open Access Journals (Sweden)

    Carlo Knupp

    2003-01-01

    Full Text Available Collagen is the most abundant protein among vertebrates and occurs in virtually all multicellular animals. Collagen molecules are classified into 21 different types and differ in their sequence, weight, structure, and function, but they can be broadly subdivided into families. Type IV, VI, VIII, X, and dogfish egg case collagens belong to the network-forming family. Here, we summarise what is known about the way these collagen molecules pack to form networks. In addition the main structural characteristics of the network-forming collagens are compared and discussed.

  16. Reflective modular forms in algebraic geometry

    CERN Document Server

    Gritsenko, Valery

    2010-01-01

    We prove that the existence of a strongly reflective modular form of a large weight implies that the Kodaira dimension of the corresponding modular variety is negative or, in some special case, it is equal to zero. Using the Jacobi lifting we construct three towers of strongly reflective modular forms with the simplest possible divisor. In particular we obtain a Jacobi lifting construction of the Borcherds-Enriques modular form Phi_4 and Jacobi liftings of automorphic discriminants of the K\\"ahler moduli of Del Pezzo surfaces constructed recently by Yoshikawa. We obtain also three modular varieties of dimension 4, 6 and 7 of Kodaira dimension 0.

  17. Cubic metaplectic forms and theta functions

    CERN Document Server

    Proskurin, Nikolai

    1998-01-01

    The book is an introduction to the theory of cubic metaplectic forms on the 3-dimensional hyperbolic space and the author's research on cubic metaplectic forms on special linear and symplectic groups of rank 2. The topics include: Kubota and Bass-Milnor-Serre homomorphisms, cubic metaplectic Eisenstein series, cubic theta functions, Whittaker functions. A special method is developed and applied to find Fourier coefficients of the Eisenstein series and cubic theta functions. The book is intended for readers, with beginning graduate-level background, interested in further research in the theory of metaplectic forms and in possible applications.

  18. Specialization of Quadratic and Symmetric Bilinear Forms

    CERN Document Server

    Knebusch, Manfred

    2010-01-01

    The specialization theory of quadratic and symmetric bilinear forms over fields and the subsequent generic splitting theory of quadratic forms were invented by the author in the mid-1970's. They came to fruition in the ensuing decades and have become an integral part of the geometric methods in quadratic form theory. This book comprehensively covers the specialization and generic splitting theories. These theories, originally developed for fields of characteristic different from 2, are explored here without this restriction. In addition to chapters on specialization theory, generic splitting t

  19. Low temperature waste form process intensification

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Cozzi, A. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hansen, E. K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hill, K. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-09-30

    This study successfully demonstrated process intensification of low temperature waste form production. Modifications were made to the dry blend composition to enable a 50% increase in waste concentration, thus allowing for a significant reduction in disposal volume and associated costs. Properties measurements showed that the advanced waste form can be produced using existing equipment and processes. Performance of the waste form was equivalent or better than the current baseline, with approximately double the amount of waste incorporation. The results demonstrate the feasibility of significantly accelerating low level waste immobilization missions across the DOE complex and at environmental remediation sites worldwide.

  20. Impaired vitality form recognition in autism.

    Science.gov (United States)

    Rochat, Magali J; Veroni, Vania; Bruschweiler-Stern, Nadia; Pieraccini, Cinzia; Bonnet-Brilhault, Frédérique; Barthélémy, Catherine; Malvy, Joëlle; Sinigaglia, Corrado; Stern, Daniel N; Rizzolatti, Giacomo

    2013-08-01

    Along with the understanding of the goal of an action ("what" is done) and the intention underlying it ("why" it is done), social interactions largely depend on the appraisal of the action from the dynamics of the movement: "how" it is performed (its "vitality form"). Do individuals with autism, especially children, possess this capacity? Here we show that, unlike typically developing individuals, individuals with autism reveal severe deficits in recognizing vitality forms, and their capacity to appraise them does not improve with age. Deficit in vitality form recognition appears, therefore, to be a newly recognized trait marker of autism.

  1. Form and function in systems neuroscience.

    Science.gov (United States)

    Kristan, William B; Katz, Paul

    2006-10-10

    'Form follows function' is an architectural philosophy attributed to the great American architect Louis Sullivan, and later taken up by the Bauhaus movement. It stresses that the form of a building should reflect its function. Neuroscientists have used the converse of this dictum to learn the functions of neural circuits, believing that if we study neural architecture, it will lead us to an understanding of how neural systems function. New tools for studying the structure of neural circuits are being developed, so it is important to discuss what the old techniques have taught us about how to derive function from the form of a neural circuit.

  2. Nonlinear dynamics exploration through normal forms

    CERN Document Server

    Kahn, Peter B

    2014-01-01

    Geared toward advanced undergraduates and graduate students, this exposition covers the method of normal forms and its application to ordinary differential equations through perturbation analysis. In addition to its emphasis on the freedom inherent in the normal form expansion, the text features numerous examples of equations, the kind of which are encountered in many areas of science and engineering. The treatment begins with an introduction to the basic concepts underlying the normal forms. Coverage then shifts to an investigation of systems with one degree of freedom that model oscillations

  3. Spectroscopic studies of star forming regions

    OpenAIRE

    2006-01-01

    This paper reviews the results of studies of star forming regions, carried out at the Konkoly Observatory in the last two decades. The studies involved distance determination of star-forming dark clouds, search for candidate pre-main sequence stars, and determination of the masses and ages of the candidates by spectroscopic follow-up observations. The results expanded the list of the well-studied star forming regions in our galactic environment. Data obtained by this manner may be useful in a...

  4. Problems in the theory of modular forms

    CERN Document Server

    Murty, M Ram; Graves, Hester

    2016-01-01

    This book introduces the reader to the fascinating world of modular forms through a problem-solving approach. As such, besides researchers, the book can be used by the undergraduate and graduate students for self-instruction. The topics covered include q-series, the modular group, the upper half-plane, modular forms of level one and higher level, the Ramanujan τ-function, the Petersson inner product, Hecke operators, Dirichlet series attached to modular forms and further special topics. It can be viewed as a gentle introduction for a deeper study of the subject. Thus, it is ideal for non-experts seeking an entry into the field. .

  5. Pseudoscalar meson form factors and decays

    CERN Document Server

    Dorokhov, A E

    2011-01-01

    In this communication we discuss few topics related with modern experimental data on the physics of light pseudoscalar mesons. It includes the contribution of the pseudoscalar mesons to the muon anomalous magnetic moment (AMM), $g-2$, the rare decays of light pseudoscalar mesons to lepton pair, the transition form factors of pseudoscalar mesons at large momentum transfer, the pion transversity form factor. Measuring the muon anomalous magnetic moment $g-2$ and the rare decays of light pseudoscalar mesons into lepton pair $P\\rightarrow l^{+}l^{-} $ serve as important test of the standard model. To reduce the theoretical uncertainty in the standard model predictions the data on the transition form factors of light pseudoscalar mesons play significant role. Recently new data on behavior of these form factors at large momentum transfer was supplied by the BABAR collaboration. Within the nonlocal chiral quark model it shown how to describe these data and how the meson distribution amplitude evolves as a function o...

  6. Separation energy dependence of hole form factors

    Energy Technology Data Exchange (ETDEWEB)

    Van de Wiele, J. [Institut de Physique Nucleaire, 91 - Orsay (France); Vdovin, A. [Bogoliubov Laboratory of Theoretical Physics, Joint Institute for Nuclear Research, 141980 Dubna (Russian Federation); Langevin-Joliot, H. [Institut de Physique Nucleaire, 91 - Orsay (France)

    1996-08-05

    Form factors of fragmented hole states are studied within the quasiparticle-phonon model, using the inhomogeneous equation method. The validity of this method is successfully checked by comparison with coupled equation solutions in schematic vibrational model cases. A systematic investigation of form factors is performed for neutron and proton hole states in the valence and first inner shells of {sup 208}Pb. Large fluctuations of form factor radii are observed for individual levels superimposed on a general increase with separation energy. Average characteristics are introduced for groups of levels, namely the mean form factors, summed source terms and correction potentials, and their behaviour is presented. The role of the relative values of the interaction radius parameter and binding well radius is discussed in detail. (orig.).

  7. Sartre, Literature, and the Forms of Knowledge.

    Science.gov (United States)

    Hyland, John T.

    1978-01-01

    The author reexamines the status of literature as a form of knowledge and offers some suggestions designed to help improve the characterization of literature, against the background of Sartre's writings on the aesthetic enterprise. (Author/SJL)

  8. Non-Coop Station History Forms Digest

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Single 71-page document entitled 'Station history non-COOP Keying Rules & Forms Digest,' dated December 12, 2003. Contractors with NCDC Climate Database...

  9. Electromagnetic Form Factors of the Nucleon

    CERN Document Server

    Bijker, R

    1997-01-01

    We reanalyze the world data on the electromagnetic form factors of the nucleon. The calculations are performed in the framework of an algebraic model of the nucleon combined with vector meson dominance.

  10. Nanoeletromechanical switch and logic circuits formed therefrom

    Science.gov (United States)

    Nordquist, Christopher D [Albuquerque, NM; Czaplewski, David A [Albuquerque, NM

    2010-05-18

    A nanoelectromechanical (NEM) switch is formed on a substrate with a source electrode containing a suspended electrically-conductive beam which is anchored to the substrate at each end. This beam, which can be formed of ruthenium, bows laterally in response to a voltage applied between a pair of gate electrodes and the source electrode to form an electrical connection between the source electrode and a drain electrode located near a midpoint of the beam. Another pair of gate electrodes and another drain electrode can be located on an opposite side of the beam to allow for switching in an opposite direction. The NEM switch can be used to form digital logic circuits including NAND gates, NOR gates, programmable logic gates, and SRAM and DRAM memory cells which can be used in place of conventional CMOS circuits, or in combination therewith.

  11. 27 CFR 20.21 - Forms prescribed.

    Science.gov (United States)

    2010-04-01

    ... OF THE TREASURY LIQUORS DISTRIBUTION AND USE OF DENATURED ALCOHOL AND RUM Administrative Provisions Authorities § 20.21 Forms prescribed. (a) The appropriate TTB officer is authorized to prescribe all...

  12. Blood-Forming Stem Cell Transplants

    Science.gov (United States)

    ... to Ask about Your Treatment Research Blood-Forming Stem Cell Transplants On This Page What are bone marrow ... Considering becoming a bone marrow or a blood stem cell donor? View this video on YouTube. Follow a ...

  13. The method of minimal normal forms

    Energy Technology Data Exchange (ETDEWEB)

    Mane, S.R.; Weng, W.T.

    1992-12-31

    Normal form methods for solving nonlinear differential equations are reviewed and the comparative merits of three methods are evaluated. The concept of the minimal normal form is explained and is shown to be superior to other choices. The method is then extended to apply to the evaluation of discrete maps of an accelerator or storage ring. Such an extension, as suggested in this paper, is more suited for accelerator-based applications than a formulation utilizing continuous differential equations. A computer code has been generated to systematically implement various normal form formulations for maps in two-dimensional phase space. Specific examples of quadratic and cubic nonlinear fields were used and solved by the method developed. The minimal normal form method shown here gives good results using relatively low order expansions.

  14. The method of minimal normal forms

    Energy Technology Data Exchange (ETDEWEB)

    Mane, S.R.; Weng, W.T.

    1992-01-01

    Normal form methods for solving nonlinear differential equations are reviewed and the comparative merits of three methods are evaluated. The concept of the minimal normal form is explained and is shown to be superior to other choices. The method is then extended to apply to the evaluation of discrete maps of an accelerator or storage ring. Such an extension, as suggested in this paper, is more suited for accelerator-based applications than a formulation utilizing continuous differential equations. A computer code has been generated to systematically implement various normal form formulations for maps in two-dimensional phase space. Specific examples of quadratic and cubic nonlinear fields were used and solved by the method developed. The minimal normal form method shown here gives good results using relatively low order expansions.

  15. Focussing on form in the classroom1

    African Journals Online (AJOL)

    need for classroom language learners to focus on form as well as meaning. ... It is common in both the pedagogic and the second language acquisition (SLA) literature to .... teachers respond to student errors through corrective feedback they ...

  16. Genetics of monegenic forms of diabetes mellitus

    Directory of Open Access Journals (Sweden)

    Tamara Leonidovna Kuraeva

    2011-03-01

    Full Text Available It is universally recognized that autoimmune type 1 diabetes mellitus (DM is not the only form of this disease in children. Increasingly more children and adolescents present with DM2, MODY, and rarer syndromal forms of DM. The actual prevalence of DM other than DM1 in children and adolescents is unknown but may be estimated at 10%. Despite rare occurrence of genetic syndromes, they collectively account for almost 5% of DM cases among children. The rapid upgrowth of molecular biology opens up a wide range of possibilities for designating various symptom complexes as nosologically selfconsistent forms. New genetic syndromes associated with DM are annually described. It is important both to adequately identify and treat manifestations and complications of these syndromes in children and to provide relevant medico-genetic counseling and recommendations to the parents. Key words: non-immune diabetes mellitus, MODY, Wolfram syndrome, neonatal, syndromal forms

  17. Dry lubricant films for aluminum forming.

    Energy Technology Data Exchange (ETDEWEB)

    Wei, J.; Erdemir, A.; Fenske, G. R.

    1999-03-30

    During metal forming process, lubricants are crucial to prevent direct contact, adhesion, transfer and scuffing of workpiece materials and tools. Boric acid films can be firmly adhered to the clean aluminum surfaces by spraying their methanol solutions and provide extremely low friction coefficient (about 0.04). The cohesion strengths of the bonded films vary with the types of aluminum alloys (6061, 6111 and 5754). The sheet metal forming tests indicate that boric acid films and the combined films of boric acid and mineral oil can create larger strains than the commercial liquid and solid lubricants, showing that they possess excellent lubricities for aluminum forming. SEM analyses indicate that boric acid dry films separate the workpiece and die materials, and prevent their direct contact and preserve their surface qualities. Since boric acid is non-toxic and easily removed by water, it can be expected that boric acid films are environmentally friendly, cost effective and very efficient lubricants for sheet aluminum cold forming.

  18. Inverse theta functions as quantum modular forms

    CERN Document Server

    Bringmann, Kathrin; Rolen, Larry

    2014-01-01

    In this paper, we consider the Fourier coefficients of a special class of meromorphic Jaocbi forms of negative index. Much recent work has been done on the Fourier coefficients of meromorphic Jacobi forms of positive index, but almost nothing is known for Jacobi forms of negative index. Here we show from two different perspectives that their Fourier coefficients have a simple decomposition in terms of partial theta functions. The first perspective uses the language of Lie super algebras, and the second applies the theory of elliptic functions. In particular, we find a new infinite family of rank-crank type PDEs generalizing the famous example of Atkin and Garvan. We then describe the modularity properties of these coefficients, showing that they are \\emph{mixed quantum modular forms}, along the way determining a new class of quantum modular partial theta functions.

  19. Sartre, Literature, and the Forms of Knowledge.

    Science.gov (United States)

    Hyland, John T.

    1978-01-01

    The author reexamines the status of literature as a form of knowledge and offers some suggestions designed to help improve the characterization of literature, against the background of Sartre's writings on the aesthetic enterprise. (Author/SJL)

  20. Product communication: form, failure and safety

    National Research Council Canada - National Science Library

    Singer, Len D

    2009-01-01

    .... This paper examines E.T. Hall's classic theory of culture as communication in an effort to introduce cultural theory to current design thought and to examine its role in the development and analysis of design form, as well...

  1. Elliptic curves and positive definite ternary forms

    Institute of Scientific and Technical Information of China (English)

    WANG; Xueli(

    2001-01-01

    [1]Pei Dingyi, Rosenberger, G. , Wang Xueli, The eligible numbers of positive definite ternary forms, Math. Zeitschriften,2000, 235: 479-497.[2]Wang Xueli, Pei Dingyi, Modular forms of 3/2 weight and one conjecture of Kaplansky, preprint.[3]Jones, B., The regularity of a genus of positive ternary quadratic forms, Trans. Amer. Math. Soc., 1931, 33: 111-124.[4]Kaplansky, I., The first nontrivial genus of positive definite ternary forms, Math. Comp., 1995, 64: 341-345.[5]Antoniadis, J. A., Bungert, M., Frey, G., Properties of twists of elliptic curves, J. Reine Angew Math., 1990, 405: 1-28.

  2. Emotional Effects of Positive Forms of Communication

    Directory of Open Access Journals (Sweden)

    Светлана Валентиновна Ионова

    2015-12-01

    Full Text Available The article discusses the problem of emotional significance of a positive form of speech. Based on the methodology of emotions linguistics, linguoecology, communicative linguistics and the methods of description, comparison and discourse analysis, the author distinguishes some types of speech situations that demonstrate visible differences between positive expression of emotions and their content and the pragmatic effect. The difference between the notions of “positive communication” and “positive form of communication” is demonstrated. Special attention is given to the following types of positive emotional communication: tolerant emotional communication, emotional emphasis, emotional neglect, and emotional tabooing. The utterances in situations of real and textual communication demonstrate negative effects of statements expressed in a positive form and identify the specifics of positive forms of emotional communication in comparison with rational communication.

  3. Siegel Modular Forms and Black Hole Entropy

    CERN Document Server

    Belin, Alexandre; Gomes, Joao; Keller, Christoph A

    2016-01-01

    We discuss the application of Siegel Modular Forms to Black Hole entropy counting. The role of the Igusa cusp form $\\chi_{10}$ in the D1D5P system is well-known, and its transformation properties are what allows precision microstate counting in this case. We implement this counting for other Siegel modular and paramodular forms, and we show that they could serve as candidates for other types of black holes. We investigate the growth of their coefficients, identifying the dominant contributions and the leading logarithmic corrections in various regimes. We also discuss similarities and differences to the behavior of $\\chi_{10}$, and possible physical interpretations of such forms both from a microscopic and gravitational point of view.

  4. 1980 Bald Eagle Midwinter Survey Field Form

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Bald Eagle Midwinter Survey Field Form and map of survey area. Includes Bald and Golden Eagles. Each observer given area to cover and stayed in same location until...

  5. Assessment of Preferred Depleted Uranium Disposal Forms

    Energy Technology Data Exchange (ETDEWEB)

    Croff, A.G.; Hightower, J.R.; Lee, D.W.; Michaels, G.E.; Ranek, N.L.; Trabalka, J.R.

    2000-06-01

    The Department of Energy (DOE) is in the process of converting about 700,000 metric tons (MT) of depleted uranium hexafluoride (DUF6) containing 475,000 MT of depleted uranium (DU) to a stable form more suitable for long-term storage or disposal. Potential conversion forms include the tetrafluoride (DUF4), oxide (DUO2 or DU3O8), or metal. If worthwhile beneficial uses cannot be found for the DU product form, it will be sent to an appropriate site for disposal. The DU products are considered to be low-level waste (LLW) under both DOE orders and Nuclear Regulatory Commission (NRC) regulations. The objective of this study was to assess the acceptability of the potential DU conversion products at potential LLW disposal sites to provide a basis for DOE decisions on the preferred DU product form and a path forward that will ensure reliable and efficient disposal.

  6. Consistent 4-form fluxes for maximal supergravity

    CERN Document Server

    Godazgar, Hadi; Krueger, Olaf; Nicolai, Hermann

    2015-01-01

    We derive new ansaetze for the 4-form field strength of D=11 supergravity corresponding to uplifts of four-dimensional maximal gauged supergravity. In particular, the ansaetze directly yield the components of the 4-form field strength in terms of the scalars and vectors of the four-dimensional maximal gauged supergravity---in this way they provide an explicit uplift of all four-dimensional consistent truncations of D=11 supergravity. The new ansaetze provide a substantially simpler method for uplifting d=4 flows compared to the previously available method using the 3-form and 6-form potential ansaetze. The ansatz for the Freund-Rubin term allows us to conjecture a `master formula' for the latter in terms of the scalar potential of d=4 gauged supergravity and its first derivative. We also resolve a long-standing puzzle concerning the antisymmetry of the flux obtained from uplift ansaetze.

  7. Observer Manual and Current Data Collection Forms

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Observer Program web page that lists the observer field manual and all current data collection forms that observers are required to take out to sea.

  8. Mathematical model of cylindrical form tolerance

    Institute of Scientific and Technical Information of China (English)

    蔡敏; 杨将新; 吴昭同

    2004-01-01

    Tolerance is essential for integration of CAD and CAM. Unfortunately, the meaning of tolerances in the national standard is expressed in graphical and language forms and is not adaptable for expression, processing and data transferring with computers. How to interpret its semantics is becoming a focus of relevant studies. This work based on the mathematical definition of form tolerance in ANSI Y 14.5.1 M-1994, established the mathematical model of form tolerance for cylindrical feature. First, each tolerance in the national standard was established by vector equation. Then on the foundation of toler-ance's mathematical definition theory, each tolerance zone's mathematical model was established by inequality based on degrees of feature. At last the variance area of each tolerance zone is derived. This model can interpret the semantics of form tolerance exactly and completely.

  9. Mathematical model of cylindrical form tolerance

    Institute of Scientific and Technical Information of China (English)

    蔡敏; 杨将新; 吴昭同

    2004-01-01

    Tolerance is essential for integration of CAD and CAM.Unfortunately,the meaning of tolerances in the national standard is expressed in graphical and language forms and is not adaptable for expression,processing and data transferring with computers.How to interpret its semantics is becoming a focus of relevant studies.This work based on the mathematical definition of form tolerance in ANSI Y 14.5.1 M-1994,established the mathematical model of form tolerance for cylindrical feature.First,each tolerance in the national standard was established by vector equation.Then on the foundation of tolerance's mathematical definition theory,each tolerance zone's mathematical model was established by inequality based on degrees of feature.At last the variance area of each tolerance zone is derived.This model can interpret the semantics of form tolerance exactly and completely.

  10. Revised Total Coliform Rule Lab Sampling Form

    Science.gov (United States)

    This form should be completed when a water system collects any required Revised Total Coliform Rule (RTCR) samples. It should also be used when collecting “Special” non-compliance samples for the RTCR.

  11. Make Projects Small Form Factor PCs

    CERN Document Server

    Wessels, Duane

    2006-01-01

    Shoebox sized and smaller, small-form-factor PCs can pack as much computing muscle as a full-sized desktop computer. They consumer less power, have few or no moving parts, and are very quiet. Whether you plan to use one as a standalone PC or want to embed it in your next hacking project, a small-form-factor PC can be a lot of fun to build. Make Projects: Small Form Factor PCs is the only book available that shows you how to build small-form-factor PCs -- from kits and from scratch -- that are more interesting and more personalized than what a full-sized PC can give you. Included in the book

  12. Color-kinematic duality for form factors

    Energy Technology Data Exchange (ETDEWEB)

    Boels, Rutger H.; Kniehl, Bernd A.; Tarasov, Oleg V.; Yang, Gang [Hamburg Univ. (Germany). 2. Inst. fuer Theoretische Physik

    2012-12-15

    Recently a powerful duality between color and kinematics has been proposed for integrands of scattering amplitudes in quite general gauge theories. In this paper the duality proposal is extended to the more general class of gauge theory observables formed by form factors. After a discussion of the general setup the existence of the duality is verified in two and three loop examples in four dimensional maximally supersymmetric Yang-Mills theory which involve the stress energy tensor multiplet. In these cases the duality reproduces known results in a particularly transparent and uniform way. As a non-trivial application we obtain a very simple form of the integrand of the four-loop two-point (Sudakov) form factor which passes a large set of unitarity cut checks.

  13. Observer Manual and Current Data Collection Forms

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Observer Program web page that lists the observer field manual and all current data collection forms that observers are required to take out to sea.

  14. Laser based micro forming and assembly.

    Energy Technology Data Exchange (ETDEWEB)

    MacCallum, Danny O' Neill; Wong, Chung-Nin Channy; Knorovsky, Gerald Albert; Steyskal, Michele D.; Lehecka, Tom (Pennsylvania State University, Freeport, PA); Scherzinger, William Mark; Palmer, Jeremy Andrew

    2006-11-01

    It has been shown that thermal energy imparted to a metallic substrate by laser heating induces a transient temperature gradient through the thickness of the sample. In favorable conditions of laser fluence and absorptivity, the resulting inhomogeneous thermal strain leads to a measurable permanent deflection. This project established parameters for laser micro forming of thin materials that are relevant to MESA generation weapon system components and confirmed methods for producing micrometer displacements with repeatable bend direction and magnitude. Precise micro forming vectors were realized through computational finite element analysis (FEA) of laser-induced transient heating that indicated the optimal combination of laser heat input relative to the material being heated and its thermal mass. Precise laser micro forming was demonstrated in two practical manufacturing operations of importance to the DOE complex: micrometer gap adjustments of precious metal alloy contacts and forming of meso scale cones.

  15. Innovative forming and fabrication technologies : new opportunities.

    Energy Technology Data Exchange (ETDEWEB)

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest

  16. A European Humus Forms Reference Base

    Science.gov (United States)

    Zanella, A.; Englisch, M.; Ponge, J.-F.; Jabiol, B.; Sartori, G.; Gardi, C.

    2012-04-01

    From 2003 on, a panel of experts in humus and humus dynamics (Humus group) has been working about a standardisation and improvement of existing national humus classifications. Some important goals have been reached, in order to share data and experiences: a) definition of specific terms; b) description of 15 types of diagnostic horizons; c) of 10 basic humus forms references; d) subdivision of each main reference in 2-4 sub-unities; e) elaboration of a general European Humus Form Reference Base (http://hal-agroparistech.archives-ouvertes.fr/docs/00/56/17/95/PDF/Humus_Forms_ERB_31_01_2011.pdf); f) publication of the scientific significance of this base of classification as an article [A European morpho-functional classification of humus forms. Geoderma, 164 (3-4), 138-145]. The classification will be updated every 2 years and presently the Humus group is assessing biological (general: soil, vegetation, biome; specific: fungi, bacteria, pedofauna), physical (air temperature, rainfall) and chemical (pH, mineral elements, organic matter, quality and quantity of humic components…) factors which characterize basic humus forms and their varieties. The content of the new version of the classification is planned to be more "practical", like an ecological manual which lists associated humus forms and environmental data in the aim to contribute to a more precise environmental diagnosis of every analysed terrestrial and semiterrestrial European ecosystem. The Humus group is also involved in an endeavour to include humus forms in the World Reference Base for Soils (WRB-FAO) according to nomenclatural principles erected for soil profiles. Thirty basic references have been defined, complemented by a set of qualifiers (prefixes and suffixes), allowing to classify European humus forms and probably a large majority of humus forms known worldwide. The principles of the classification, the diagnostic horizons and humus forms main references are presented at the General Assembly of

  17. (p,q)-form Kaehler electromagnetism

    Energy Technology Data Exchange (ETDEWEB)

    Cherney, D. [Department of Mathematics, University of California, Davis, CA 95616 (United States)], E-mail: cherney@math.ucdavis.edu; Latini, E. [Dipartimento di Fisica, Universita di Bologna, via Irnerio 46, I-40126 Bologna (Italy); INFN, Laboratori Nazionali di Frascati, CP 13, I-00044 Frascati (Italy)], E-mail: latini@lnf.infn.it; Waldron, A. [Department of Mathematics, University of California, Davis, CA 95616 (United States)], E-mail: wally@math.ucdavis.edu

    2009-04-27

    We present a gauge invariant generalization of Maxwell's equations and p-form electromagnetism to Kaehler manifolds. The result is a detour operator connecting Dolbeault and dual Dolbeault cohomologies and derives from BRST detour quantization of the N=4 supersymmetry algebra. The form of the new equations mimics the linearized Einstein's equations and extends to more general geometric structures.

  18. On the -Invariant of Hermitian Forms

    Indian Academy of Sciences (India)

    Sudeep S Parihar; V Suresh

    2013-08-01

    Let be a field of characteristic not 2 and a central simple algebra with an involution . A result of Mahmoudi provides an upper bound for the -invariants of hermitian forms and skew-hermitian forms over (,) in terms of the -invariant of . In this paper we give a different upper bound when is a tensor product of quaternion algebras and is a the tensor product of canonical involutions. We also show that our bounds are sharper than those of Mahmoudi.

  19. Normal form analysis of the Tevatron

    Energy Technology Data Exchange (ETDEWEB)

    Holt, J.A.

    1994-07-01

    A systematic analysis effort is under way to calculate and model the effects of present and future upgrades to the Tevatron. As a first step, using normal form theory, amplitude-dependent tuneshifts for current Tevatron collider operating conditions were calculated. The normal form algorithm was implemented within the frame work of the object-oriented accelerator physics class libraries BEAMLINE and MXYZPTLK under development at Fermilab.

  20. The Evolving Forms of Risk Reporting Practices

    DEFF Research Database (Denmark)

    Christiansen, Ulrik; Thrane, Sof; Andersen, Torben Juul

    reporting system. The risk management frameworks generally assume that information is communicated in exact codified form, but little research has analyzed the construction of risk when the reporting trespasses organizational levels. The managers in the middle however are often depicted as mediators between...... shaped by systematic variation in reporting practices at different hierarchical levels. Here the tactical middle layer adheres to temporalizing form of risk reporting practices in attempts to create flexibility within a rigid management reporting system....