Unexpected high diversity of galling insects in the Amazonian upper canopy: the savanna out there.

Science.gov (United States)

Julião, Genimar R; Venticinque, Eduardo M; Fernandes, G Wilson; Price, Peter W

2014-01-01

A relatively large number of studies reassert the strong relationship between galling insect diversity and extreme hydric and thermal status in some habitats, and an overall pattern of a greater number of galling species in the understory of scleromorphic vegetation. We compared galling insect diversity in the forest canopy and its relationship with tree richness among upland terra firme, várzea, and igapó floodplains in Amazonia, Brazil. The soils of these forest types have highly different hydric and nutritional status. Overall, we examined the upper layer of 1,091 tree crowns. Galling species richness and abundance were higher in terra firme forests compared to várzea and igapó forests. GLM-ANCOVA models revealed that the number of tree species sampled in each forest type was determinant in the gall-forming insect diversity. The ratio between galling insect richness and number of tree species sampled (GIR/TSS ratio) was higher in the terra firme forest and in seasonally flooded igapó, while the várzea presented the lowest GIR/TSS ratio. In this study, we recorded unprecedented values of galling species diversity and abundance per sampling point. The GIR/TSS ratio from várzea was approximately 2.5 times higher than the highest value of this ratio ever reported in the literature. Based on this fact, we ascertained that várzea and igapó floodplain forests (with lower GIA and GIR), together with the speciose terra firme galling community emerge as the gall diversity apex landscape among all biogeographic regions already investigated. Contrary to expectation, our results also support the "harsh environment hypothesis", and unveil the Amazonian upper canopy as similar to Mediterranean vegetation habitats, hygrothermically stressed environments with leaf temperature at lethal limits and high levels of leaf sclerophylly.

Unexpected high diversity of galling insects in the Amazonian upper canopy: the savanna out there.

Directory of Open Access Journals (Sweden)

Genimar R Julião

Full Text Available A relatively large number of studies reassert the strong relationship between galling insect diversity and extreme hydric and thermal status in some habitats, and an overall pattern of a greater number of galling species in the understory of scleromorphic vegetation. We compared galling insect diversity in the forest canopy and its relationship with tree richness among upland terra firme, várzea, and igapó floodplains in Amazonia, Brazil. The soils of these forest types have highly different hydric and nutritional status. Overall, we examined the upper layer of 1,091 tree crowns. Galling species richness and abundance were higher in terra firme forests compared to várzea and igapó forests. GLM-ANCOVA models revealed that the number of tree species sampled in each forest type was determinant in the gall-forming insect diversity. The ratio between galling insect richness and number of tree species sampled (GIR/TSS ratio was higher in the terra firme forest and in seasonally flooded igapó, while the várzea presented the lowest GIR/TSS ratio. In this study, we recorded unprecedented values of galling species diversity and abundance per sampling point. The GIR/TSS ratio from várzea was approximately 2.5 times higher than the highest value of this ratio ever reported in the literature. Based on this fact, we ascertained that várzea and igapó floodplain forests (with lower GIA and GIR, together with the speciose terra firme galling community emerge as the gall diversity apex landscape among all biogeographic regions already investigated. Contrary to expectation, our results also support the "harsh environment hypothesis", and unveil the Amazonian upper canopy as similar to Mediterranean vegetation habitats, hygrothermically stressed environments with leaf temperature at lethal limits and high levels of leaf sclerophylly.

CLINICO-PATHOLOGICAL STUDY OF CARCINOMA GALL BLADDER

Directory of Open Access Journals (Sweden)

Ravindra

2015-12-01

Full Text Available INTRODUCTION Gall bladder cancer is 5th most common cancer of GIT. It is associated with cholelithiasis in significant number of patients. Cholelithiasis is cause or effect of gall bladder cancer is still uncertain. There are many risk factors which are common to both gall stones and cancer. Preoperative diagnosis of gall bladder cancer is increased with better and new investigation facilities. AIM The study was aimed to assess clinicopathological behaviour, sociodemography, diagnostic modalities and treatment of cancer gall bladder. MATERIAL AND METHODS It was a type of prospective study which included 75 patients with clinical features suggestive of biliary disease. Various diagnostic modalities and treatment options were assessed along with sociodemography and clinical picture. RESULT Common clinical features were pain abdomen, obstructive jaundice and lump. Nearly one third of the patients were having anaemia and abnormal liver function tests. Majority had gall bladder fossa mass with liver extension and gall stones. The most common histopathological variety of carcinoma Gallbladder was Adenocarcinoma. CONCLUSION Carcinoma Gallbladder was found to affect predominantly the older female patients after the age of 40 years. Cholelithiasis was found in 69.3% patients of carcinoma Gallbladder. The most common clinical presentation was pain abdomen (90.7%. The most common histopathological variety of carcinoma Gallbladder was Adenocarcinoma. Majority of patients were treated with palliative measures.

Arthropods associated with fungal galls: do large galls support more abundant and diverse inhabitants?

Science.gov (United States)

Funamoto, Daichi; Sugiura, Shinji

2017-02-01

Fungus-induced galls can attract spore-feeding arthropods as well as gall-feeding ones, resulting in diverse communities. Do large fungal galls support more abundant and diverse arthropod communities than small fungal galls? To address this question, we investigated the structure of the arthropod community associated with bud galls induced by the fungus Melanopsichium onumae on the tree species Cinnamomum yabunikkei (Lauraceae) in central Japan. Thirteen species of arthropods were associated with M. onumae galls. Dominant arthropod species were represented by the larvae of a salpingid beetle (a spore feeder), a nitidulid beetle (a spore feeder), a cosmopterigid moth (a spore feeder), an unidentified moth (a gall tissue feeder), and a drosophilid species (a gall tissue feeder). Arthropod abundance and species richness were positively correlated with gall diameter. The majority of the most abundant species were more frequently found in large galls than in small ones, indicating that large fungal galls, which have more food and/or space for arthropods, could support a more abundant and diverse arthropod community.

Co-occurrence of pathogenic and non-pathogenic Fusarium decemcellulare and Lasiodiplodia theobromae isolates in cushion galls disease of cacao (Theobroma cacao L.

Directory of Open Access Journals (Sweden)

Castillo Daynet Sosa del

2016-04-01

Full Text Available Flowery cushion gall of cacao is a disease complex with six types. Fusarium decemcellulare have been isolated from both flowery and green point galls and recognized as the etiological agent of the disease. In the present work we: i identified by ITS-rDNA sequencing and/or taxonomy the cultivable fungal species or Operative Taxonomic Units (OTUs associated with the five symptoms of cushion galls in cacao from Venezuela, and ii determined the gall inducing capacity on cacao peeled seeds after 45 days of inoculation with suspensions of mycelia/ spores from distinct isolate types. The whole isolate collection rendered an abundance of 113 isolates with a richness of 39 OTUs (27 and eight identified at the species or genera levels, respectively, and in unidentified fungi. The dominant recovered species (≈36% were F. decemcellulare and Lasiodiplodia theobromae. Some isolates of F. decemcellulare, L. theobromae, F. equiseti, Fusarium spp., F. solani, F. incarnatum, Rhizocthonia solani and Penicillium sp. were pathogenic. Some other isolates of the first six mentioned taxa behave as non-pathogenic. Furthermore, pathogenic and non-pathogenic isolates can also co-occur within a single plant and gall type. Moreover, 2-5 species within a single gall symptom in a single tree were identified (not necessarily at the same point in the tree, indicating a broad diversity of co-occurring taxa.

Predation on rose galls: parasitoids and predators determine gall size through directional selection.

Directory of Open Access Journals (Sweden)

Zoltán László

Full Text Available Both predators and parasitoids can have significant effects on species' life history traits, such as longevity or clutch size. In the case of gall inducers, sporadically there is evidence to suggest that both vertebrate predation and insect parasitoid attack may shape the optimal gall size. While the effects of parasitoids have been studied in detail, the influence of vertebrate predation is less well-investigated. To better understand this aspect of gall size evolution, we studied vertebrate predation on galls of Diplolepis rosae on rose (Rosa canina shrubs. We measured predation frequency, predation incidence, and predation rate in a large-scale observational field study, as well as an experimental field study. Our combined results suggest that, similarly to parasitoids, vertebrate predation makes a considerable contribution to mortality of gall inducer larvae. On the other hand, its influence on gall size is in direct contrast to the effect of parasitoids, as frequency of vertebrate predation increases with gall size. This suggests that the balance between predation and parasitoid attack shapes the optimal size of D. rosae galls.

A cadaveric study involving variations in external morphology of gall bladder

Directory of Open Access Journals (Sweden)

Anjankar Vaibhav Prakash, Panshewdikar Pradnyesh N, Joshi DS, Anjankar Ashish Prakash

2013-04-01

Full Text Available Background: Variations in the pattern of the extra hepatic biliary tract are usual and are commonly encountered during some radiological investigations or in operation theaters. Such Variations of the morphology of Gall bladder have been well documented in the literature for many years but a detail morphological study of variations of the gall bladder and its incidence is very rare. In this era of quick results, increasing use of diagnostic and interventional procedures makes it important to study variations of gall bladder morphology. Most of the interventional procedures in this modern era are done laparoscopically and there is tremendous increase in the number of laparoscopic cholecystectomies. So, sound knowledge of possible variations in morphology of gall bladder is important. Materials and Methods: This study was undertaken on 90 cadaveric liver and gall bladder specimens in terms of length, maximum transverse diameter, shape, external variations of gall bladder, Interior and length of gall bladder below the inferior border of the liver. Results: GB had length ranging between 7 and 10 cm, transverse diameter between 2 and 5 cm. The commonest shape observed in this study was pear shaped in 82.22% of cases. The length of gall bladder below the inferior border of liver varied between 0.4 and 2.5 cm. Conclusion: The growing importance of such variations, lie not only from the point of biliary disease but also with respect to the various invasive techniques in the diagnosis and treatment of gall bladder and extrahepatic bile duct disease.

What should I do about my patient's gall stones?

Science.gov (United States)

Dennison, A R; Azoulay, D; Oakley, N; Baer, H; Paraskevopoulos, J A; Maddern, G J

1995-12-01

The problem of benign biliary disease is one that causes significant morbidity and social economic strain in the western world. The classical treatment, cholecystectomy, has been challenged by various medical and surgical techniques in a seemingly random nature. The development of the treatment of gall stone disease is reviewed by analysis of published studies over the last 20 years. The advantages and disadvantages are discussed as an overview and summary of the current management of gall stone disease in the light of our knowledge of its malignant potential.

Carcinoma Gall Bladder: Past, Present, and Future

Directory of Open Access Journals (Sweden)

Ghosh Y

2014-12-01

Full Text Available Carcinoma gall bladder is a very aggressive disease with poor outcomes. Despite achievements in the field of advanced imaging techniques, there is a very high mortality rate of the disease Cancer is the second most common disease in India responsible for maximum mortality with about 0.3 million deaths per year. The magnitude of cancer problem in the Indian Sub-continent (sheer numbers is increasing due to poor to moderate living standards and inadequate medical facilities. Women are more commonly affected than men. The peak incidence occurs in people in their 60s, but the disease age range is from 29 to 90 years of age and there is great geographic and ethnic variation. Carcinoma gall bladder, a disease of old age, is now found in the younger age group and presents with greater ferocity.

Financial cost to institutions on patients waiting for gall bladder disease surgery.

Science.gov (United States)

Waqas, Ahmed; Qasmi, Shahzad Ahmed; Kiani, Faran; Raza, Ahmed; Khan, Khizar Ishtiaque; Manzoor, Shazia

2014-01-01

The aim of this study was to determine the financial costs to institution on patients waiting for gall bladder disease surgery and suggest measures to reduce them. This multi-centre prospective descriptive survey was performed on all patients who underwent an elective cholecystectomy by three consultants at secondary care hospitals in Pakistan between Jan 2010 to Jan 2012. Data was collected on demographics, the duration of mean waiting time, specific indications and nature of disease for including the patients in the waiting list, details of emergency re-admissions while awaiting surgery, investigations done, treatment given and expenditures incurred on them during these episodes. A total of 185 patients underwent elective open cholecystectomy. The indications for listing the patients for surgery were biliary colic in 128 patients (69%), acute cholecystitis in 43 patients (23%), obstructive jaundice in 8 patients (4.5%) and acute pancreatitis in 6 patients (3.2%). 146 (78.9%) and 39 (21.1%) of patients were listed as outdoor electives and indoor emergencies respectively. Of the 185 patients, 54 patients (29.2%) were re-admitted. Financial costs in Pakistani rupees per episode of readmission were 23050 per episode in total and total money spent on all readmissions was Rs. 17,05,700/-. Financial costs on health care institutions due to readmissions in patients waiting for gall bladder disease surgery are high. Identifying patients at risk for these readmissions and offering them early laparoscopic cholecystectomy is very important.

A Ti plasmid-encoded enzyme required for degradation of mannopine is functionally homologous to the T-region-encoded enzyme required for synthesis of this opine in crown gall tumors.

Science.gov (United States)

Kim, K S; Chilton, W S; Farrand, S K

1996-06-01

The mocC gene encoded by the octopine/mannityl opine-type Ti plasmid pTi15955 is related at the nucleotide sequence level to mas1' encoded by the T region of this plasmid. While Mas1 is required for the synthesis of mannopine (MOP) by crown gall tumor cells, MocC is essential for the utilization of MOP by Agrobacterium spp. A cosmid clone of pTi15955, pYDH208, encodes mocC and confers the utilization of MOP on strain NT1 and on strain UIA5, a derivative of NT1 lacking the 450-kb cryptic plasmid pAtC58. NT1 or UIA5 harboring pYDH208 with an insertion mutation in mocC failed to utilize MOP as the sole carbon source. Plasmid pSa-C, which encodes only mocC, complemented this mutation in both strains. This plasmid also was sufficient to confer utilization of MOP on NT1 but not on UIA5. Computer analysis showed that MocC is related at the amino acid sequence level to members of the short-chain alcohol dehydrogenase family of oxidoreductases. Lysates prepared from Escherichia coli cells expressing mocC contained an enzymatic activity that oxidizes MOP to deoxyfructosyl glutamine (santhopine [SOP]) in the presence of NAD+. The reaction catalyzed by the MOP oxidoreductase is reversible; in the presence of NADH, the enzyme reduced SOP to MOP. The apparent Km values of the enzyme for MOP and SOP were 6.3 and 1.2 mM, respectively. Among analogs of MOP tested, only N-1-(1-deoxy-D-lyxityl)-L-glutamine and N-1-(1-deoxy-D-mannityl)-L-asparagine served as substrates for MOP oxidoreductase. These results indicate that mocC encodes an oxidoreductase that, as an oxidase, is essential for the catabolism of MOP. The reductase activity of this enzyme is precisely the reaction ascribed to its T-region-encoded homolog, Mas1, which is responsible for biosynthesis of mannopine in crown gall tumors.

Fungus-insect gall of Phlebopus portentosus.

Science.gov (United States)

Zhang, Chun-Xia; He, Ming-Xia; Cao, Yang; Liu, Jing; Gao, Feng; Wang, Wen-Bing; Ji, Kai-Ping; Shao, Shi-Cheng; Wang, Yun

2015-01-01

Phlebopus portentosus is a popular edible wild mushroom found in the tropical Yunnan, China, and northern Thailand. In its natural habitats, a gall often has been found on some plant roots, around which fungal fruiting bodies are produced. The galls are different from common insect galls in that their cavity walls are not made from plant tissue but rather from the hyphae of P. portentosus. Therefore we have termed this phenomenon "fungus-insect gall". Thus far six root mealy bug species in the family Pseudococcidae that form fungus-insect galls with P. portentosus have been identified: Formicococcus polysperes, Geococcus satellitum, Planococcus minor, Pseudococcus cryptus, Paraputo banzigeri and Rastrococcus invadens. Fungus-insect galls were found on the roots of more than 21 plant species, including Delonix regia, Citrus maxima, Coffea arabica and Artocarpus heterophyllus. Greenhouse inoculation trials showed that fungus-insect galls were found on the roots of A. heterophyllus 1 mo after inoculation. The galls were subglobose to globose, fulvous when young and became dark brown at maturation. Each gall harbored one or more mealy bugs and had a chimney-like vent for ventilation and access to the gall. The cavity wall had three layers. Various shaped mealy bug wax deposits were found inside the wall. Fungal hyphae invaded the epidermis of plant roots and sometimes even the cortical cells during the late stage of gall development. The identity of the fungus inside the cavity was confirmed by molecular methods. © 2015 by The Mycological Society of America.

77 FR 73654 - Eau Galle Renewable Energy Company, Eau Galle Hydro, LLC; Notice of Transfer of Exemption

Science.gov (United States)

2012-12-11

... Renewable Energy Company, Eau Galle Hydro, LLC; Notice of Transfer of Exemption 1. By letter filed October 12, 2012, Eau Galle Renewable Energy Company informed the Commission that its exemption from... transferred to Eau Galle Renewable Energy Company by letter.\\2\\ The project is located on the Eau Galle River...

Regional differences in constituents of gall stones.

Science.gov (United States)

Ashok, M; Nageshwar Reddy, D; Jayanthi, V; Kalkura, S N; Vijayan, V; Gokulakrishnan, S; Nair, K G M

2005-01-01

The pathogenesis of pigment and mixed gall stone formation remains elusive. The elemental constituents of gall stones from southern states of Tamil Nadu, Kerala and Karnataka have been characterized. Our aim was to determine the elemental concentration of representative samples of pigment, mixed and cholesterol gall stones from Andhra Pradesh using proton-induced X-ray emission (PIXE) using a 3 MV horizontal pelletron accelerator. Pigment gall stones had significantly high concentrations of copper, iron and lead; chromium was absent. Except for iron all these elements were significantly low in cholesterol gall stones and intermediate levels were seen in mixed gall stones. Highest concentrations of chromium was seen in cholesterol and titanium in mixed gall stones respectively; latter similar to other southern states. Arsenic was distinctly absent in cholesterol and mixed gall stones. The study has identified differences in elemental components of the gall stones from Andhra Pradesh.

Duplex gall bladder: bystander or culprit.

Science.gov (United States)

Kumar, Jogender; Yadav, Arushi

2017-08-30

Gall bladder (GB) duplication is a rare anatomical malformation, which can be detected by preoperative imaging study. We present a case of duplex gall bladder in a 14-year-old boy who presented with abdominal pain. On ultrasound, he had right nephrolithiasis and duplex gall bladder. Duplex gall bladder was confirmed on MR cholangiopancreatography. There was a dilemma for surgical management of duplex gall bladder; however, he became asymptomatic after conservative treatment. Prophylactic surgery is not recommended for asymptomatic incidentally detected duplex gall bladder. Radiologists and paediatric surgeons should be sensitised about the exact anatomy of this entity. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Coleopterous galls from the Neotropical region

Directory of Open Access Journals (Sweden)

Valéria Cid Maia

2012-01-01

Full Text Available Data on Neotropical coleopterous galls were compiled from the literature, which showed that 82 galls have so far been recorded among 77 plant species. The Fabaceae and Asteraceae plant families display the greatest richness in galls. Most galls are induced on stems or buds, while leaves constitute the second most attacked plant organ. Only 16 coleopteran gallers have been identified at the species level; most records are presented at the order level. The identified species belong to four families: Apionidae, Buprestidae, Curculionidae and Erirhinidae. The galls are found in Argentina, Brazil, Belize, Chile, Colombia (probably, Costa Rica, El Salvador, Guatemala, Honduras, Mexico, Nicaragua, Panama and Venezuela. Eighteen species of Coleoptera are inquilines of galls and are associated with 18 plant species, most frequently with Asteraceae, Melastomataceae and Fabaceae. The inquilines were recorded mainly in leaf galls induced by Cecidomyiidae (Diptera. The identity of these weevils is poorly known. General data indicate a lack of taxonomic studies in the Neotropical region.

Presumptive migrating gall bladder mucocoele in two dogs with gall bladder rupture.

Science.gov (United States)

Burchell, R K; Thornton, L; Lim, C K; Murakami, M; Nakamura, Y; Gal, A

2017-12-13

A 10-year-old neutered female soft-coated wheaten terrier and a 10-year-old, entire female Pomeranian were presented for vomiting and anorexia. Using ultrasound, an oval structure with a stellate, kiwifruit-like appearance typical of a gall bladder mucocoele was observed in the caudal abdomen of the soft-coated wheaten terrier and adjacent to the liver in the Pomeranian. There was also a moderate volume of abdominal effusion in both dogs. Cytology of the peritoneal fluid indicated a sterile exudative process but varied between the two dogs, with an absence of bile pigment in the soft-coated wheaten terrier and marked bile peritonitis in the Pomeranian. An entire free-floating ectopic mucocoele was confirmed via exploratory laparotomy with concomitant gall bladder rupture and common bile duct obstruction. Both dogs recovered completely after surgery. This is the first report of cases of gall bladder rupture with entire free-floating gall bladder mucocoeles in dogs. © 2017 British Small Animal Veterinary Association.

An observational study on the association of nonalcoholic fatty liver disease and metabolic syndrome with gall stone disease requiring cholecystectomy.

Science.gov (United States)

Ahmed, Farah; Baloch, Qamaruddin; Memon, Zahid Ali; Ali, Iqra

2017-05-01

Recognition of Non alcoholic fatty liver disease (NAFLD) and metabolic syndrome in patients with gallstones undergoing laparoscopic or open cholecystectomy, along with it we will also study the life style of patients with gall stones. Patients with gallstones have associated NAFLD, with concurrent metabolic syndrome and these ailments share similar factors for example obesity, hypertriglyceridemia and diabetes mellitus. Factors like body mass index, gender, raised lipid levels, use of contraceptives and alcohol and having diabetes, physical inactiveness, multiparous women, water with excessive iron content, metabolic syndrome, and NAFLD are accountable factors for gallstones formation. This was a case series done at Surgical Unit 1 of Civil Hospital Karachi. Selective samples of 88 patients were included. Duration was 3 months. We included both sexes with ultrasound proof of gall stone irrespective of cholecystitis. Excluded patients with history of seropositive viral hepatitis, autoimmune and wilson's disease. As these conditions can act as a confounder to our variables. Nafld was present in 62.5%(n = 55) while 28.4% (n = 25) had metabolic syndrome. 26.94% had BMI less than 18, 32.12 had BMI between 18 and 25 and majority had BMI greater than 25 i.e in 40.93%. Of all 46.6% had a family history of cholelithiasis. Gallstone patients with NAFLD reported about their first degree relative being suffering from cholelithiasis at a significant p-value of 0.034 while this was not significant in cases of metabolic syndrome and the p -value was 0.190. We found association of metabolic syndrome with gallstones and NAFLD. Non alcoholic fatty liver was highly prevalent in our study subjects. Huge percentage of first degree relatives of gall stone patients had gallstones and this relation was more pronounced patients who had associated NAFLD.

Carcinoma transverse colon masquerading as carcinoma gall bladder.

Science.gov (United States)

Munghate, Anand; Kumar, Ashwani; Singh, Harnam; Singh, Gurpreet; Singh, Bimaljot; Chauhan, Mahak

2014-04-01

Colorectal cancer is one of the most common cancer worldwide .Its incidence is reported to be increasing in developing countries. It commonly presents with weight loss, anaemia, lump abdomen, change of bowel habit, obstruction or fresh rectal bleeding. Beside these common modes of presentations, there are some rare manifestations which masqueraded as different disease like obstructive jaundice, empyema gall bladder or cholecystitis. A 60-year-old male presented to hospital with right sided pain abdomen. On abdominal examination mild tenderness was present in right hypochondrium. Intra operatively gall bladder was separated from the adjoining gut, peritoneum and liver bed and was removed. On further exploration, there was a large mass in the vicinity of the gall bladder related to transverse colon. Extended right hemicolectomy was done. Histopathological examination of gut mass revealed adenocarcinoma of transverse colon with free margins and gall bladder showed cholecystitis with no evidence of malignancy. We present an interesting case of colon cancer colon that caused diagnostic confusion by mimicking as cholecystitis. Colorectal cancer constitutes a major public health issue globally. Therefore, public awareness, screening of high-risk populations, early diagnosis and effective treatment and follow-up will help to reduce its occurance and further complications.

The gall wasp Leptocybe invasa (Hymenoptera: Eulophidae) stimulates different chemical and phytohormone responses in two Eucalyptus varieties that vary in susceptibility to galling.

Science.gov (United States)

Li, X Q; Liu, Y Z; Guo, W F; Solanki, M K; Yang, Z D; Xiang, Y; Ma, Z C; Wen, Y G

2017-09-01

Gall-inducing insects produce various types of galls on plants, but little is known about the gall-induction mechanism of these galling insects. The gall wasp Leptocybe invasa Fisher & LaSalle (Hymenoptera: Eulophidae) forms galls of different sizes on several Eucalyptus species. To clarify the physiological responses of Eucalyptus to L. invasa infestation, we measured the dynamics of nitrogen (N), carbon (C), total phenolics, total tannins and four types of phytohormones (zeatin [Z] + zeatin riboside [ZR], gibberellins [GA], indole-3-acetic acid [IAA] and abscisic acid [ABA]) in galled and ungalled leaf tissues of two Eucalyptus horticultural varieties (DH201-2 [Eucalyptus grandis × Eucalyptus camaldulensis] and EA [Eucalyptus exserta]) with different susceptibility to galling throughout the larval developmental stages. Nitrogen, total phenolics, tannins and four kinds of phytohormones strongly accumulated in tissues galled by L. invasa (especially during early larval feeding stages). While N, Z + ZR and GA levels were higher, tannins and ABA levels were lower in the galled tissues on the highly susceptible variety. Nitrogen, total phenolics, GA, Z + ZR and IAA levels in the galled tissues gradually decreased during gall development, but ABA and tannins conversely increased in the galled tissues of the less susceptible variety. Our results suggest that the effects of gall-inducing insects on plants depend not only on the susceptibility of the plant infested but also on the developmental stage of galled tissues. Gall formation process is thus synergistically influenced by both gall-inducing insect and plant genotypes. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Roughness characterization of the galling of metals

Science.gov (United States)

Hubert, C.; Marteau, J.; Deltombe, R.; Chen, Y. M.; Bigerelle, M.

2014-09-01

Several kinds of tests exist to characterize the galling of metals, such as that specified in ASTM Standard G98. While the testing procedure is accurate and robust, the analysis of the specimen's surfaces (area=1.2 cm) for the determination of the critical pressure of galling remains subject to operator judgment. Based on the surface's topography analyses, we propose a methodology to express the probability of galling according to the macroscopic pressure load. After performing galling tests on 304L stainless steel, a two-step segmentation of the S q parameter (root mean square of surface amplitude) computed from local roughness maps (100 μ m× 100 μ m) enables us to distinguish two tribological processes. The first step represents the abrasive wear (erosion) and the second one the adhesive wear (galling). The total areas of both regions are highly relevant to quantify galling and erosion processes. Then, a one-parameter phenomenological model is proposed to objectively determine the evolution of non-galled relative area A e versus the pressure load P, with high accuracy ({{A}e}=100/(1+a{{P}2}) with a={{0.54}+/- 0.07}× {{10}-3} M P{{a}-2} and with {{R}2}=0.98). From this model, the critical pressure of galling is found to be equal to 43MPa. The {{S}5 V} roughness parameter (the five deepest valleys in the galled region's surface) is the most relevant roughness parameter for the quantification of damages in the ‘galling region’. The significant valleys’ depths increase from 10 μm-250 μm when the pressure increases from 11-350 MPa, according to a power law ({{S}5 V}=4.2{{P}0.75}, with {{R}2}=0.93).

Phylogeny, evolution and classification of gall wasps: the plot thickens.

Directory of Open Access Journals (Sweden)

Fredrik Ronquist

Full Text Available Gall wasps (Cynipidae represent the most spectacular radiation of gall-inducing insects. In addition to true gall formers, gall wasps also include phytophagous inquilines, which live inside the galls induced by gall wasps or other insects. Here we present the first comprehensive molecular and total-evidence analyses of higher-level gall wasp relationships. We studied more than 100 taxa representing a rich selection of outgroups and the majority of described cynipid genera outside the diverse oak gall wasps (Cynipini, which were more sparsely sampled. About 5 kb of nucleotide data from one mitochondrial (COI and four nuclear (28S, LWRh, EF1alpha F1, and EF1alpha F2 markers were analyzed separately and in combination with morphological and life-history data. According to previous morphology-based studies, gall wasps evolved in the Northern Hemisphere and were initially herb gallers. Inquilines originated once from gall inducers that lost the ability to initiate galls. Our results, albeit not conclusive, suggest a different scenario. The first gall wasps were more likely associated with woody host plants, and there must have been multiple origins of gall inducers, inquilines or both. One possibility is that gall inducers arose independently from inquilines in several lineages. Except for these surprising results, our analyses are largely consistent with previous studies. They confirm that gall wasps are conservative in their host-plant preferences, and that herb-galling lineages have radiated repeatedly onto the same set of unrelated host plants. We propose a revised classification of the family into twelve tribes, which are strongly supported as monophyletic across independent datasets. Four are new: Aulacideini, Phanacidini, Diastrophini and Ceroptresini. We present a key to the tribes and discuss their morphological and biological diversity. Until the relationships among the tribes are resolved, the origin and early evolution of gall wasps will

Incidence of 'crown fracture' disease of oil palm in Ghana | Quaicoe ...

African Journals Online (AJOL)

An investigation into outbreak of a 'strange oil palm disease' at three locations in the Central and Western regions of Ghana showed the presence of 'crown fracture' disease in the country. Thirty-two cases of the disease were identified in Papagya (near Abakrampa), seven in Dwaboh (near Ayensudu), and six in the farm of ...

Galling of unlubricated close-fitting metal parts

International Nuclear Information System (INIS)

Wensel, R.G.

1979-09-01

Galling susceptibility tests employing threaded and disc-shaped specimens of 42 different combinations of corrosion-resistant alloys are described. Data to assist designers in selecting combinations of corrosion-resistant materials on the basis of galling susceptibility are presented. A test technique using small disc-shaped specimens is described. This provides a sensitive measure of susceptibility of metal pairs to galling. (author)

Practices to manage chestnut orchards infested by the Chinese gall wasp

Directory of Open Access Journals (Sweden)

Turchetti T

2012-10-01

Full Text Available The rapid spread of the Chinese gall wasp (Dryocosmus kuriphilus Yasumatsu in Italian chestnut growing areas is causing new criticisms. In this context, in addition to a clear plant suffering due to the wasp infestation, the dangerous recurrence of chestnut blight and the sudden spread of Gnomoniopsis sp., a coloniser of galls but also the etiological agent of nut brown rot, must be considered. Therefore, it is very important to increase the plants’ vigour and prevent their decline. Preliminary experiments were carried out in different Italian regions between 2010 and 2011. Organic plant fertilizers were applied to plants showing middle or high defoliation levels caused by the wasp attacks. The observations carried out during the growing season indicate a good vegetative restart in the treated plants compared to the untreated controls, in all the situations and independently of the fertilizers applied. Most of the treated plants (between the 75% and the 100% showed an evident improvement in the canopy vegetation, while the untreated controls were always classified in the worse classes of crown condition. These preliminary results highlight the efficacy of this kind of treatments for infested chestnut stands. This strategy, which is based on the preliminary evaluation of the plant vigour (following the proposed scale of attack severity and lack of foliage, consists in a manuring treatment at vegetative restart, which can be repeated in the following years in dependence on the results obtained. Moreover, pruning may be suggested only to manage the development of plants showing a definite recovery. The gall wasp pullulation requires new management strategies aimed at preserving the chestnut orchards, in order to avoid the chestnut cultivation to be marginalized or abandoned.

Mango leaf gall formation: varietal susceptibility and within tree distribution

International Nuclear Information System (INIS)

Khan, H.A.; Akram, W.; Khan, M.A.

2012-01-01

The present study was carried out to screen most commonly cultivated mango, Mangifera indica L., cultivars for their susceptibility to gall formation. Sarooli cultivar proved to be the most resistant one by having a minimum number of galls per 100 leaves. The abundance of galls in four quadrants of the tree i.e., east, west, north and south, was also studied which revealed that east quadrant had maximum number of galls while the abundance of galls in the remaining quadrants was variable. Gall formation on mango leaves seemed to increase gradually with increasing height from the ground level, reached a maximum at the height 12 ft to 16 ft and then declined. Leaf area measurements and nutrient analysis of the leaves were also done to see their impact on gall formation. Correlation analysis revealed that gall formation was positively linked with leaf area and the amount of Zn (ppm), P (%), K (%) while N (%) had negative correlation (P<0.05) with gall formation. In conclusion, the findings of the present study could be helpful in the management of mango leaf gall formation. (author)

Photosynthesis and sink activity of wasp-induced galls in Acacia pycnantha.

Science.gov (United States)

Dorchin, Netta; Cramer, Michael D; Hoffmann, John H

2006-07-01

Although insect galls are widely known to influence source-sink relationships in plants, the relationship between photosynthesis and gall activity has not been extensively studied. In this study we used 14CO2, photosynthesis, and respiration measurements to examine the capacity of bud galls induced by the wasp Trichilogaster signiventris (Pteromalidae) as carbon sinks in Acacia pycnantha. Galls of this species develop either in vegetative or reproductive buds, depending on the availability of tissues at different times of the year, and effectively eliminate seed production by the plant. Photosynthetic rates in phyllodes subtending clusters of galls were greater than rates in control phyllodes, a result we attributed to photosynthesis compensating for increased carbon demand by the galls. Contrary to previous studies, we found that photosynthesis within galls contributed substantially to the carbon budgets of the galls, particularly in large, mature galls, which exhibited lower specific respiration rates allowing for a net carbon gain in the light. To determine the sink capacity and competitive potential of galls, we measured the proportion of specific radioactivity in galls originating from either vegetative or reproductive buds and found no difference between them. The proportion of the total amount of phyllode-derived 14C accumulated in both clustered and solitary galls was less than that in fruits. Galls and fruits were predominantly reliant on subtending rather than on distant phyllodes for photosynthate. Solitary galls that developed in vegetative buds constituted considerably stronger sinks than galls in clusters on inflorescences where there was competition between galls or fruits for resources from the subtending phyllode. Wasps developing in solitary vegetative galls were correspondingly significantly larger than those from clustered galls. We conclude that, in the absence of inflorescence buds during summer and fall, the ability of the wasps to cause gall

Galled by the Gallbladder?: Your Tiny, Hard-Working Digestive Organ

Science.gov (United States)

... Galled by the Gallbladder? Your Tiny, Hard-Working Digestive Organ En español Send us your comments Most ... among the most common and costly of all digestive system diseases. By some estimates, up to 20 ...

Aboveground insect infestation attenuates belowground Agrobacterium-mediated genetic transformation.

Science.gov (United States)

Song, Geun Cheol; Lee, Soohyun; Hong, Jaehwa; Choi, Hye Kyung; Hong, Gun Hyong; Bae, Dong-Won; Mysore, Kirankumar S; Park, Yong-Soon; Ryu, Choong-Min

2015-07-01

Agrobacterium tumefaciens causes crown gall disease. Although Agrobacterium can be popularly used for genetic engineering, the influence of aboveground insect infestation on Agrobacterium induced gall formation has not been investigated. Nicotiana benthamiana leaves were exposed to a sucking insect (whitefly) infestation and benzothiadiazole (BTH) for 7 d, and these exposed plants were inoculated with a tumorigenic Agrobacterium strain. We evaluated, both in planta and in vitro, how whitefly infestation affects crown gall disease. Whitefly-infested plants exhibited at least a two-fold reduction in gall formation on both stem and crown root. Silencing of isochorismate synthase 1 (ICS1), required for salicylic acid (SA) synthesis, compromised gall formation indicating an involvement of SA in whitefly-derived plant defence against Agrobacterium. Endogenous SA content was augmented in whitefly-infested plants upon Agrobacterium inoculation. In addition, SA concentration was three times higher in root exudates from whitefly-infested plants. As a consequence, Agrobacterium-mediated transformation of roots of whitefly-infested plants was clearly inhibited when compared to control plants. These results suggest that aboveground whitefly infestation elicits systemic defence responses throughout the plant. Our findings provide new insights into insect-mediated leaf-root intra-communication and a framework to understand interactions between three organisms: whitefly, N. benthamiana and Agrobacterium. © 2015 The Authors. New Phytologist © 2015 New Phytologist Trust.

Gall bladder function test with Ceruletid

International Nuclear Information System (INIS)

Schindler, G.

1981-01-01

Compared with the stimulating food given orally in the gall bladder function test the administration of the decapeptide Ceruletid which is related with Cholecystokinin has the advantage of avoiding resorption disturbances in the upper gastrointestinal tract. To 100 patients with positive peroral cholecystography, Ceruletid was injected i.m. in a dose of 0.4 μg/kg body weight. The contrasting of the main bile duct was thus increased from 10% to 86%. The oral stimulating food brings an increase to appr. 20%. A special importance is assigned to the frequent diagnosis of adenomyomatoses which, with 6%, lies significantly above the 0.8% achieved by means of the oral stimulating food. More contractile segments of the gall bladder wall can cause pain symptoms which are typical for the biliary tract. Adenomyomatoses in the region of the infundibulum of the gall bladder cause colicky pains and are, as generally accepted, an absolute indication for a surgical intervention. The finding of small gall bladder conrements is often connected with a strong diminution of the gall bladder in order to prevent the small concrements from being overlapped by the non-contrasting bladder bile. Therefore, the application of Ceruletid should be considered also within the frame of the intravenous cholegraphy, thinking of the large number of normal gall bladder findings which were obtained with the oral stimulating food as the only diagnostical help. (orig./MG) [de

Galls and gall makers in plants from the Pé-de-Gigante Cerrado Reserve, Santa Rita do Passa Quatro, SP, Brazil.

Science.gov (United States)

Urso-Guimarães, M V; Scareli-Santos, C

2006-02-01

Thirty-six morphologically different types of galls were obtained in leaves, leaflets, veins, petioles, stems, tendrils and flower buds from twenty-five species of plants in the Pé-de-Gigante Reserve, municipality of Santa Rita do Passa Quatro, state of São Paulo, Brazil. The host plant species belong to the closely related families Anacardiaceae, Annonaceae, Asteraceae, Bignoniaceae, Caryocaraceae, Erythroxylaceae, Fabaceae, Malpighiaceae, Melastomataceae, Myrtaceae, Ochnaceae, Polygalaceae, Sapindaceae, Sapotaceae, and Smilacaceae. The most common gall makers included Cecidomyiidae (Diptera), Pteromalidae (Hymenoptera) and Diaspididae (Sternorrhyncha-Hemiptera). This is the first report of galls found in the following plant genera: Gochnatia (Asteraceae), Distictela (Bignoniaceae), Banisteriopsis (Malpighiaceae), Ouratea (Ochnaceae), and Bredemeyera (Polygalaceae). The results of this work contribute to the body of knowledge about the relationship among host plants, gall makers, and the gall morphology of Pé-de-Gigante Cerrado Reserve.

Galls and gall makers in plants from the Pé-de-Gigante Cerrado Reserve, Santa Rita do Passa Quatro, SP, Brazil

Directory of Open Access Journals (Sweden)

M. V. Urso-Guimarães

Full Text Available Thirty-six morphologically different types of galls were obtained in leaves, leaflets, veins, petioles, stems, tendrils and flower buds from twenty-five species of plants in the Pé-de-Gigante Reserve, municipality of Santa Rita do Passa Quatro, state of São Paulo, Brazil. The host plant species belong to the closely related families Anacardiaceae, Annonaceae, Asteraceae, Bignoniaceae, Caryocaraceae, Erythroxylaceae, Fabaceae, Malpighiaceae, Melastomataceae, Myrtaceae, Ochnaceae, Polygalaceae, Sapindaceae, Sapotaceae, and Smilacaceae. The most common gall makers included Cecidomyiidae (Diptera, Pteromalidae (Hymenoptera and Diaspididae (Sternorrhyncha-Hemiptera. This is the first report of galls found in the following plant genera: Gochnatia (Asteraceae, Distictela (Bignoniaceae, Banisteriopsis (Malpighiaceae, Ouratea (Ochnaceae, and Bredemeyera (Polygalaceae. The results of this work contribute to the body of knowledge about the relationship among host plants, gall makers, and the gall morphology of Pé-de-Gigante Cerrado Reserve.

Pancreatic heterotopia in the gall bladder: a case report and literature review

Directory of Open Access Journals (Sweden)

Sansom Henrique Bromberg

2009-03-01

Full Text Available Pancreatic heterotopia in the gall bladder is a rare entity, with approximately 31 cases reported in English language literature until 2006; there are no Brazilian studies on the topic. As it is usually asymptomatic, the definitive diagnosis is made by the anatomopathological material excised due to common diseases of the organ, such as lithiasis, inflammatory processes, polyps and tumors. A case is reported of a 40-year-old female patient submitted to surgery with a diagnosis of lithiasic cholecystopathy. Ectopy was evidenced by the histological study, due to the presence of acinar and ductal components of the pancreas and gall bladder corpus. The authors used their own pathological classification for this ectopy, and recommended that this entity be included more frequently in the differential diagnosis of alithiasic cholecystopathy and intramural and exophytic lesions of the gall bladder.

Host Genetics and Environment Drive Divergent Responses of Two Resource Sharing Gall-Formers on Norway Spruce: A Common Garden Analysis.

Science.gov (United States)

Axelsson, E Petter; Iason, Glenn R; Julkunen-Tiitto, Riitta; Whitham, Thomas G

2015-01-01

A central issue in the field of community genetics is the expectation that trait variation among genotypes play a defining role in structuring associated species and in forming community phenotypes. Quantifying the existence of such community phenotypes in two common garden environments also has important consequences for our understanding of gene-by-environment interactions at the community level. The existence of community phenotypes has not been evaluated in the crowns of boreal forest trees. In this study we address the influence of tree genetics on needle chemistry and genetic x environment interactions on two gall-inducing adelgid aphids (Adelges spp. and Sacchiphantes spp.) that share the same elongating bud/shoot niche. We examine the hypothesis that the canopies of different genotypes of Norway spruce (Picea abies L.) support different community phenotypes. Three patterns emerged. First, the two gallers show clear differences in their response to host genetics and environment. Whereas genetics significantly affected the abundance of Adelges spp. galls, Sacchiphantes spp. was predominately affected by the environment suggesting that the genetic influence is stronger in Adelges spp. Second, the among family variation in genetically controlled resistance was large, i.e. fullsib families differed as much as 10 fold in susceptibility towards Adelges spp. (0.57 to 6.2 galls/branch). Also, the distribution of chemical profiles was continuous, showing both overlap as well as examples of significant differences among fullsib families. Third, despite the predicted effects of host chemistry on galls, principal component analyses using 31 different phenolic substances showed only limited association with galls and a similarity test showed that trees with similar phenolic chemical characteristics, did not host more similar communities of gallers. Nonetheless, the large genetic variation in trait expression and clear differences in how community members respond to host

Host Genetics and Environment Drive Divergent Responses of Two Resource Sharing Gall-Formers on Norway Spruce: A Common Garden Analysis.

Directory of Open Access Journals (Sweden)

E Petter Axelsson

Full Text Available A central issue in the field of community genetics is the expectation that trait variation among genotypes play a defining role in structuring associated species and in forming community phenotypes. Quantifying the existence of such community phenotypes in two common garden environments also has important consequences for our understanding of gene-by-environment interactions at the community level. The existence of community phenotypes has not been evaluated in the crowns of boreal forest trees. In this study we address the influence of tree genetics on needle chemistry and genetic x environment interactions on two gall-inducing adelgid aphids (Adelges spp. and Sacchiphantes spp. that share the same elongating bud/shoot niche. We examine the hypothesis that the canopies of different genotypes of Norway spruce (Picea abies L. support different community phenotypes. Three patterns emerged. First, the two gallers show clear differences in their response to host genetics and environment. Whereas genetics significantly affected the abundance of Adelges spp. galls, Sacchiphantes spp. was predominately affected by the environment suggesting that the genetic influence is stronger in Adelges spp. Second, the among family variation in genetically controlled resistance was large, i.e. fullsib families differed as much as 10 fold in susceptibility towards Adelges spp. (0.57 to 6.2 galls/branch. Also, the distribution of chemical profiles was continuous, showing both overlap as well as examples of significant differences among fullsib families. Third, despite the predicted effects of host chemistry on galls, principal component analyses using 31 different phenolic substances showed only limited association with galls and a similarity test showed that trees with similar phenolic chemical characteristics, did not host more similar communities of gallers. Nonetheless, the large genetic variation in trait expression and clear differences in how community members

The biology of gall-inducing arthropods.

Science.gov (United States)

Gyuri Csoka; William J. Mattson; Graham N. Stone; Peter W. Price

1998-01-01

This proceedings explores many facets of the ever intriguing and enigmatic relationships between plants and their gall-forming herbivores. The research reported herein ranges from studies on classical biology and systematics of galling to molecular phylogeny, population genetics, and ecological and evolutionary theory. Human kind has much to learn and gain from...

Carcinoma of Gall bladder with distant metastasis to breast parenchyma. Report of a case and review of literature

International Nuclear Information System (INIS)

Kumaran, D.; Anamalai, M.; Velu, U.; Julka, P.K.; Nambirajan, A.

2016-01-01

Background: Gall bladder carcinoma is one of the most common cancers in India. Gall bladder cancer with metastasis to the breast is very rare. Herein we intend to report a case of carcinoma gall bladder with breast metastasis and a short review of the literature. Methods: This report describes an interesting and unusual case of gall bladder carcinoma presenting with breast metastasis. Case report: A 38-year lady presented with complaints of right abdominal pain. Bilateral breast examination showed 2 2 cm palpable lump in the upper outer quadrant of the left breast. Contrast-enhanced CT of the abdomen and pelvis showed circumferential thickening of gall bladder with the loss of fat plane with the adjacent liver parenchyma. Biopsy from the breast lump was reported as metastatic adenocarcinoma compatible with primary in the gall bladder. Whole body PET-CT showed gall bladder mass with abdominal and pelvic nodes with metastasis to liver, left breast, C7 vertebral body and left supra-clavicular node. She was diagnosed to have disseminated carcinoma gall bladder with liver, breast and supraclavicular nodal metastasis. She received palliative chemotherapy with gemcitabine and carboplatin and radiotherapy to C7 vertebra. After receiving 3 cycles of chemotherapy, chemotherapy was changed to the second line with single agent capecitabine. In spite of two lines of chemotherapy, she succumbed to disease progression and expired. Conclusion: There are limited examples of gall bladder adenocarcinoma with simultaneous metastasis to breast in the English literature. Our case showed an unusual dissemination of gall bladder cancer

Unusual presentation of metastatic gall bladder cancer

Directory of Open Access Journals (Sweden)

Piyush Shukla

2014-01-01

Full Text Available To report the first case of rare isolated breast metastasis from carcinoma gall bladder. Single patient case report. A 35-year-old pre-menopausal female presented with 2 FNx01 2 cm right upper outer quadrant breast lump. Post-mastectomy, histology confirmed it to be metastatic adenocarcinoma positive for both Cytokeratin (CK 7 and CK20. Past history as told by the patient revealed that 2 years back, cholecystectomy was performed for gall stones, of which no histology reports were present; she had a port site scar recurrence which showed it to be adenocarcinoma. Adjuvant chemotherapy and radiotherapy was advised which the patient did not complete. This is probably the first case reported of isolated breast metastasis from gall bladder carcinoma, diagnosed retrospectively. It also highlights the importance of adjuvant treatment in gall bladder malignancy.

Prevalence of gall bladder stones among type 2 diabetic patients in Benghazi Libya: a case-control study

Directory of Open Access Journals (Sweden)

Behieh A

2009-01-01

Full Text Available Background: Diabetes mellitus and gall bladder stones are both common and costly diseases.Increasing age, female gender, overweight, familial history of the disease and type 2 diabetes mellitusis all associated with an increased risk of gallstones. Several studies from around the world reportedan increased prevalence of gall bladder stones in patients with diabetes mellitus. Aims andobjectives: The aim of this study was to define the frequency of gall bladder stones among Libyandiabetics and to evaluate the possible associated risk factors in these patients. Patients andmethods: A case-control study was performed during 2007 at Benghazi Diabetes and endocrinologyCenter. The study involved 161 randomly selected type-2 diabetic patients under regular follow up atthe center, and 166 age and sex matched non-diabetic outpatients at the 7th of October teachinghospital. Real-time abdominal ultrasound was performed by two radiologists to examine the abdomenafter an overnight fast. Results: About 40% of the diabetic cohort had gall bladder stones ascompared to 17.5% of non-diabetic patients. Females were significantly more affected than males.Patients with gall bladder stones were significantly older and had a significantly higher body massindex than those without stones. Conclusion: The prevalence of gallstones in Libyan diabeticpatients is higher than the rates reported in other parts of the world. Libyan diabetic patients withgallstones tend to be older and more obese than those without gallstones. Duration of diabetesmellitus and type of treatment does not seem to influence the frequency of gall bladder stones amongLibyan diabetics.

Fungal endophytes which invade insect galls: insect pathogens, benign saprophytes, or fungal inquilines?

Science.gov (United States)

Wilson, Dennis

1995-08-01

Fungi are frequently found within insect galls. However, the origin of these fungi, whether they are acting as pathogens, saprophytes invading already dead galls, or fungal inquilines which invade the gall but kill the gall maker by indirect means, is rarely investigated. A pathogenic role for these fungi is usually inferred but never tested. I chose the following leaf-galling-insect/host-plant pairs (1) a cynipid which forms two-chambered galls on the veins of Oregon white oak, (2) a cynipid which forms single-chambered galls on California coast live oak, and (3) an aphid which forms galls on narrowleaf cottonwood leaves. All pairs were reported to have fungi associated with dead insects inside the gall. These fungi were cultured and identified. For the two cynipids, all fungi found inside the galls were also present in the leaves as fungal endophytes. The cottonwood leaves examined did not harbor fungal endophytes. For the cynipid on Oregon white oak, the fungal endophyte grows from the leaf into the gall and infects all gall tissue but does not directly kill the gall maker. The insect dies as a result of the gall tissue dying from fungal infection. Therefore, the fungus acts as an inquiline. Approximately 12.5% of these galls die as a result of invasion by the fungal endophyte.

Sugary secretions of wasp galls: a want-to-be extrafloral nectar?

Science.gov (United States)

Aranda-Rickert, Adriana; Rothen, Carolina; Diez, Patricia; González, Ana María; Marazzi, Brigitte

2017-11-10

The most widespread form of protective mutualisms is represented by plants bearing extrafloral nectaries (EFNs) that attract ants and other arthropods for indirect defence. Another, but less common, form of sugary secretion for indirect defence occurs in galls induced by cynipid wasps. Until now, such galls have been reported only for cynipid wasps that infest oak trees in the northern hemisphere. This study provides the first evidence of galls that exude sugary secretions in the southern hemisphere and asks whether they can be considered as analogues of plants' EFNs. The ecology and anatomy of galls and the chemical composition of the secretion were investigated in north-western Argentina, in natural populations of the host trees Prosopis chilensis and P. flexuosa . To examine whether ants protect the galls from natural enemies, ant exclusion experiments were conducted in the field. The galls produce large amounts of sucrose-rich, nectar-like secretions. No typical nectary and sub-nectary parenchymatic tissues or secretory trichomes can be observed; instead there is a dense vascularization with phloem elements reaching the gall periphery. At least six species of ants, but also vespid wasps, Diptera and Coleoptera, consumed the gall secretions. The ant exclusion experiment showed that when ants tended galls, no differences were found in the rate of successful emergence of gall wasps or in the rate of parasitism and inquiline infestation compared with ant-excluded galls. The gall sugary secretion is not analogous to extrafloral nectar because no nectar-producing structure is associated with it, but is functionally equivalent to arthropod honeydew because it provides indirect defence to the plant parasite. As in other facultative mutualisms mediated by sugary secretions, the gall secretion triggers a complex multispecies interaction, in which the outcome of individual pair-wise interactions depends on the ecological context in which they take place. © The Author

Insect galls from Serra de São José (Tiradentes, MG, Brazil

Directory of Open Access Journals (Sweden)

V. C. Maia

Full Text Available One hundred thirty-seven morphotypes of insect galls were found on 73 plant species (47 genera and 30 families in Serra de São José, in Tiradentes, MG, Brazil. Fabaceae, Myrtaceae, Asteraceae, and Melastomataceae were the plant families that supported most of the galls (49.6% of the total. Galls were mostly found on leaves and stems (66.4% and 25.5%, respectively. Galls were induced by Diptera, Lepidoptera, Coleoptera, Hemiptera (Sternorrhyncha, Hymenoptera, and Thysanoptera. The majority of them (73.7% were induced by gall midges (Cecidomyiidae: Diptera. Besides the gall inducers, other insects found associated with the galls were parasitoids (Hymenoptera, inquilines (Coleoptera, Lepidoptera, Diptera, and Hemiptera, and predators (Diptera.

Insect galls of Restinga de Marambaia (Barra de Guaratiba, Rio de Janeiro, RJ).

Science.gov (United States)

Maia, V C; Silva, L O

2016-04-19

Thirty-one morphotypes of insect galls and two flower damages were found on 16 families, 22 genera and 24 plant species in Restinga de Marambaia (Barra de Guaratiba, Rio de Janeiro, RJ). Fabaceae and Myrtaceae were the plant families with the greatest richness of insect galls (4 and 6 morphotypes, respectively), and the greatest number of galled plants (four and three species, respectively). Galls were mostly found on leaves and stems (77% and 10%, respectively). The galling insects are represented by Diptera, Lepidoptera, and Hemiptera. The majority of the galls (81%) were induced by gall midges (Cecidomyiidae: Diptera).

Crown rust control on oats

International Nuclear Information System (INIS)

Frey, K.J.; Browning, J.A.; Simons, M.D.

1976-01-01

Attempts have been made to test the relative effectiveness of EMS treatment for inducing tolerance to crown rust among oat strains Clintland-60 of different ploidy levels. One strain of diploid and one of tetraploid oats were treated with EMS. These two strains are as susceptible to damage from crown rust as are cultivars of hexaploid oats. Multiline cultivars of oats have been shown to provide adequate protection from economic loss due to crown-rust disease in Iowa. Since 1968, eleven multiline cultivars of oats have been released from the Iowa station for use in commercial production in the midwestern USA. During the past two winter seasons, the effectiveness of multiline oat cultivars against crown-rust disease has been researched in Texas, USA, which has a ''long rust season'' of about four months, not an Iowa ''short rust season''. The protection against crown rust afforded by the multiline cultivars appeared equally good in Texas and Iowa. The seasonal productions of crown-rust spores relative to completely resistant and susceptible checks were nearly identical in both environments. Fifteen new isolines of oats have been developed for use in multiline varieties, with seed supplies sufficiently large for immediate use

Spontaneous Perforation of Common Bile Duct: A Rare Presentation of Gall Stones Disease

Directory of Open Access Journals (Sweden)

Duminda Subasinghe

2016-01-01

Full Text Available Background. Spontaneous perforation of the extrahepatic biliary system is a rare presentation of gall stones. Very few cases of bile duct perforation have been reported in adults. It is rarely suspected or correctly diagnosed preoperatively. Case Presentation. A 66-year-old female presented at the surgical emergency with 3 days’ history of severe upper abdominal pain with distension and repeated episodes of vomiting, as she had evidence of generalized peritonitis and underwent an exploratory laparotomy. A single 0.5 cm × 0.5 cm free perforation was present on the anterolateral surface of the common bile duct at the junction of cystic duct. A cholecystectomy and the CBD exploration were performed. Conclusion. Spontaneous perforation of the extrahepatic bile duct is a rare but important presentation of gall stones in adults. Therefore, awareness of the clinical presentation, expert ultrasound examination, and surgery are important aspects in the management.

Correlation between Copper, Zinc and some lipids in serum, bile and stones of patients with gall stone disease

International Nuclear Information System (INIS)

Abu-Farsakh, F.

1997-01-01

Measurements of Cu, Zn and some lipid concentrations were carried out in serum, bile and gall stone samples collected from 76 patients undergoing surgery for removal of gall stones. The results showed that Cu and Zn were present in micromolar concentration in bile (average Cu concentration = 13.4 ± 0.92, average Zn concentration = 13.4 ± 1.05) and gall stones (average Cu concentration = 2.8 ± 0.16, average Zn concentration = 1.8 ± 0.16 mmol/ g stone). Cross-tabulation of the results showed significant positive linear correlations (p< 0.01) between stone Zn vs. bile cholesterol (r = 0.253), stone Zn vs. bile bilirubin (r = 0.396) (in mixed stones only). This suggested that the more hydrophobic the bile sample, the more Zn co-precipitate with cholesterol or bilirubin. (author). 17 refs., 3 tabs

Left-sided gall bladder: Report of two cases

Directory of Open Access Journals (Sweden)

Chrungoo R

2007-01-01

Full Text Available Left-sided gall bladder without situs inversus viscerum is a rare albeit recognized clinical entity. We report our experience of two cases of left-sided gall bladder in two women aged 36 and 48 who underwent laparoscopic cholecystectomy for chronic calculous cholecystitis. Left-sided gall bladder may provide an unusual surprise to the surgeons during laparoscopy as routine pre-operative studies may not always detect the anomaly. Awareness of the unpredictable confluence of the cystic duct into the common bile duct (CBD and selective use of intraoperative cholangiography aid in the safe laparoscopic management of this unusual entity.

Galling insects are bioindicators of environmental quality in a Conservation Unit

Directory of Open Access Journals (Sweden)

André Portugal Santana

2014-12-01

Full Text Available Galls are well distributed across the World and among plant families. Their diversity can support the status of conservation of an area as an urban park, once inventories are presented. These inventories also help to understand the morphological patterns of the galls, based on their most common shape, color, host botanical families, inducers and galled organs. This study is about an inventory of galls at Parque Estadual Serra Verde, Brazil. This conservation unit is an urban park strongly anthropized in a transition area of Cerrado and Mata Atlântica. Galls from four different trails were observed, and collected monthly during one year. The terminology morphospecies was used to distinguish the galls because the identification of the inducers were not always possible. Seventy five morphospecies of galls belonging to 43 host plant species of 24 botanical families were observed. Mostly of the galls was induced by Diptera:Cecidomyiidae, in Fabaceae and Myrtaceae. The most common traits were the globoid shape and green color. The leaves were the most frequent galled organ and followed by the stems. All these tendencies had been already observed in other inventories. Comparing current results with other studies at similar areas, we can assume that the Parque Estadual Serra Verde is very important for conservation. Urban green areas are subject to high disturbance and degradation but also increase the quality of life for the population inhabiting the areas nearby. The diversity of galls at Parque Estadual Serra Verde reflects an area with high levels of stress but with moderate botanical diversity. These features make this protected area an important site for the continuous conservation and regeneration, and highlight the environmental value of Parque Estadual Serra Verde.

Antioxidant activity of insect gall extracts of Pistacia integerrima.

Science.gov (United States)

Eshwarappa, Ravi Shankara Birur; Lakshmikantha, Ramachandra Yarappa; Subaramaihha, Sundara Rajan; Subbaiah, Sujan Ganapathy Pasura; Surendranath, Austin Richard; Dhananjaya, Bhadrapura Lakkappa

2015-01-01

Pistacia integerrima (P. integerrina) insect galls are widely used in ayurveda and siddha system of medicine as karkatasringi. The use of leaf galls as a rejuvenator may be attributed to antioxidant property, however there is less scientific evidence. Therefore, the aim of this study was to evaluate the chemical composition and the antioxidant potential of leaf gall extracts (aqueous and ethanol) of P. integerrina, which is extensively used in the preparation of traditional medications. The antioxidant activities of aqueous and ethanolic leaf gall extracts were examined using diphenylpicrylhydrazyl (DPPH), hydroxyl scavenging and ferric reducing power (FRAP) methods. The presences of phenolics, tannins, phytosterols, triterpenoids, saponins, flavonoids and reducing sugars were identified in both the extracts. In comparison to the aqueous extract, the ethanolic extract had the highest total phenolic and flavonoid content at 234 ±2.4 mg of GAE/g d.w. and 95.5 ±3.2 mg of QUE/g d.w., respectively. This higher content of total phenolics and flavonoids found in the ethanolic extract was directly associated with higher antioxidant activity. This study demonstrates the poetnet antioxidant activities of P. integerrima leaf gall extracts. Further, there was a strong association between the higher antioxidant activities with that of higher total phenolic and flavonoid content in the ethanolic leaf gall extracts of P. integerrima. The results encourage the use of P. integerrima leaf gall extracts for medicinal health, functional food and nutraceuticals applications, due to their antioxidant properties. Future work will be interesting to learn the chemical composition and better understand the mechanism of action of the antioxidants present in the extract for development as a drug for therapeutic application.

Diversity of insect galls associated with coastal shrub vegetation in Rio de Janeiro, Brazil.

Science.gov (United States)

Carvalho-Fernandes, Sheila P; Ascendino, Sharlene; Maia, Valéria C; Couri, Márcia S

2016-09-01

Surveys in the coastal sandy plains (restingas) of Rio de Janeiro have shown a great richness of galls. We investigated the galling insects in two preserved restingas areas of Rio de Janeiro state: Parque Estadual da Costa do Sol and Reserva Particular do Patrimônio Natural Fazenda Caruara. The collections were done each two months, from June 2011 to May 2012. We investigated 38 points during 45 minutes each per collection. The galls were taken to the laboratory for rearing the insects. A total number of 151 insect galls were found in 82 plant species distributed into 34 botanic families. Most of the galls occurred on leaves and the plant families with the highest richness of galls were Myrtaceae and Fabaceae. All the six insect orders with galling species were found in this survey, where Cecidomyiidae (Diptera) was the main galler group. Hymenoptera and Thysanoptera were found as parasitoids and inquilines in 29 galls. The richness of galls in the surveyed areas reveals the importance of restinga for the composition and diversity of gall-inducing insect fauna.

Diversity of insect galls associated with coastal shrub vegetation in Rio de Janeiro, Brazil

Directory of Open Access Journals (Sweden)

SHEILA P. CARVALHO-FERNANDES

Full Text Available ABSTRACT Surveys in the coastal sandy plains (restingas of Rio de Janeiro have shown a great richness of galls. We investigated the galling insects in two preserved restingas areas of Rio de Janeiro state: Parque Estadual da Costa do Sol and Reserva Particular do Patrimônio Natural Fazenda Caruara. The collections were done each two months, from June 2011 to May 2012. We investigated 38 points during 45 minutes each per collection. The galls were taken to the laboratory for rearing the insects. A total number of 151 insect galls were found in 82 plant species distributed into 34 botanic families. Most of the galls occurred on leaves and the plant families with the highest richness of galls were Myrtaceae and Fabaceae. All the six insect orders with galling species were found in this survey, where Cecidomyiidae (Diptera was the main galler group. Hymenoptera and Thysanoptera were found as parasitoids and inquilines in 29 galls. The richness of galls in the surveyed areas reveals the importance of restinga for the composition and diversity of gall-inducing insect fauna.

Distributional record of oak gall wasp (Hymenoptera: Cynipidae ...

African Journals Online (AJOL)

In this survey, oak gall wasp species were collected from the oak forests of Pardanan, Mirabad, Nalas, Sardasht, Hamran and Dar-ghabr in West-Azerbaijan province. The galls occurring on 50 cm sampled branches from four cardinal directions on each tree were counted multiple times throughout the season. Species ...

surgery of the gall-bladder and the commo bile-duct* 1

African Journals Online (AJOL)

The surgical treatment of diseases of the gall-bladder consists largely of the treatment of stones and their complications. There is a voluminous literature on gallstones, but its analysis would serve little purpose in this paper. It is of greater value to analyse one's own experience, to discuss how we can diagnose lesions of.

Agrobacterium and Tumor Induction: A Model System.

Science.gov (United States)

Lennox, John E.

1980-01-01

The author offers laboratory procedures for experiments using the bacterium, Agrobacterium tumefaciens, which causes crown gall disease in a large number of plants. Three different approaches to growing a culture are given. (SA)

The Goldenrod Ball Gall

Science.gov (United States)

Fischer, Richard B.

1974-01-01

The paper presents a generalized life history of the goldenrod ball gall, a ball-shaped swelling found almost exclusively on the Canada goldenrod, Solidago canadensis, and caused by a peacock fly know as Eurosta soldiaginis. (KM)

Cytological and histochemical gradients on two Copaifera langsdorffii Desf. (Fabaceae)--Cecidomyiidae gall systems.

Science.gov (United States)

de Oliveira, Denis Coelho; Carneiro, Renê Gonçalves da Silva; Magalhães, Thiago Alves; Isaias, Rosy Mary dos Santos

2011-10-01

Previous ultrastructural and histochemical analysis proposed patterns in the accumulation of substances in galls of Diptera: Cecidomyiidae in some plant species of the temperate region. Similar analyses were done to verify the conservativeness of these patterns in the Neotropical region, where a great number of species of Cecidomyiidae is responsible for a wide diversity of morphotypes. Two gall morphotypes induced by Cecidomyiidae in a unique host plant, Copaifera langsdorffii, were studied. The gradients of carbohydrates and the activity of invertases and acid phosphatases were similar, but the cytological gradients and distribution of proteins evidenced that the sites of the induction as well as the amount of neoformed tissues may be peculiar to each gall system. The production of lipids just in the secretory cavities either in the non-galled or galled tissues indicated a potentiality of the host plant which could not be manipulated by the galling insects. Further, the absence of nucleus in the nutritive tissue, an exclusive feature of the horn-shaped galls, indicates cell death attributed to the feeding habit of the galling herbivore.

OCCURRENCE AND CHARACTERIZATION OF INSECT GALLS IN THE FLORESTA NACIONAL DE SILVÂNIA, BRAZIL

Directory of Open Access Journals (Sweden)

BÁRBARA ARAÚJO RIBEIRO BERGAMINI

Full Text Available ABSTRACT In the present paper we investigated the insect gall distribution along savanna and forest sites in the Floresta Nacional de Silvânia, Goiás, Brazil. The insect gall fauna was surveyed bi-monthly between December 2009 and June 2010. In total we found 186 insect gall morphotypes, distributed on 35 botanical families and 61 plant species. Ninety-nine insect gall morphotypes were recorded in the forest and 87 in the savanna. Gall-inducing insects belonged to Coleoptera, Diptera, Hemiptera, Lepidoptera and Thysanoptera, with highlight to Cecidomyiidae (Diptera that induced 34.1% of the gall morphotypes. Parasitoids and/or inquilines were recorded in 38 morphotypes, mainly from the families Eulophidae, Eurytomidae and Torymidae (Hymenoptera. Fabaceae was the botanical family with the greatest richness of galls, followed by Asteraceae and Sapindaceae, being Protium (Burseraceae, Siparuna (Siparunaceae and Serjania (Sapindaceae the main host genera. This is the first systematic survey of insect galls realized in the Flona-Silvânia, which result in six plant species are recorded for the first time in Brazil as host of insect galls.

The relevance of folkloric usage of plant galls as medicines: Finding the scientific rationale.

Science.gov (United States)

Patel, Seema; Rauf, Abdur; Khan, Haroon

2018-01-01

Galls, the abnormal growths in plants, induced by virus, bacteria, fungi, nematodes, arthropods, or even other plants, are akin to cancers in fauna. The galls which occur in a myriad of forms are phytochemically-distinct from the normal plant tissues, for these are the sites of tug-of-war, just like the granuloma in animals. To counter the stressors, in the form of the effector proteins of the invaders, the host plants elaborate a large repertoire of metabolites, which they normally will not produce. Perturbation of the jasmonic acid pathway, and the overexpression of auxin, and cytokinin, promote the tissue proliferation and the resultant galls. Though the plant family characteristics and the attackers determine the gall biochemistry, most of the galls are rich in bioactive phytochemicals such as phenolic acids, anthocyanins, purpurogallin, flavonoids, tannins, steroids, triterpenes, alkaloids, lipophilic components (tanshinone) etc. Throughout the long trajectory of evolution, humans have learned to use the galls as therapeutics, much like other plant parts. In diverse cultures, the evidence of folkloric usage of galls abound. Among others, galls from the plant genus like Rhus, Pistacia, Quercus, Terminalia etc. are popular as ethnomedicine. This review mines the literature on galling agents, and the medicinal relevance of galls. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Agrobacterium arsenijevicii sp. nov., isolated from crown gall tumors on raspberry and cherry plum.

Science.gov (United States)

Kuzmanović, Nemanja; Puławska, Joanna; Prokić, Anđelka; Ivanović, Milan; Zlatković, Nevena; Jones, Jeffrey B; Obradović, Aleksa

2015-09-01

Two plant-tumorigenic strains KFB 330(T) and KFB 335 isolated from galls on raspberry (Rubus idaeus) in Serbia, and a non-pathogenic strain AL51.1 recovered from a cherry plum (Prunus cerasifera) tumor in Poland, were genotypically and phenotypically characterized. Phylogenetic reconstruction based on 16S rDNA placed them within the genus Agrobacterium, with A. nepotum as their closest relative. Multilocus sequence analysis (MLSA) based on the partial sequences of atpD, glnA, gyrB, recA and rpoB housekeeping genes suggested that these three strains represent a new Agrobacterium species, that clustered with type strains of A. nepotum, A. radiobacter, "A. fabrum" and A. pusense. This was further supported by average nucleotide identity values (Agrobacterium species. The major cellular fatty acids of the novel strains were 18:1 w7c (72.8-77.87%) and 16:0 (6.82-8.58%). Phenotypic features allowed their differentiation from closely related species. Polyphasic characterization showed that the three strains represent a novel species of the genus Agrobacterium, for which the name Agrobacterium arsenijevicii sp. nov. is proposed. The type strain of A. arsenijevicii is KFB 330(T) (= CFBP 8308(T) = LMG 28674(T)). Copyright © 2015 Elsevier GmbH. All rights reserved.

Numerical relationships of the Solidago altissima stem gall insect-parasitoid guild food chain.

Science.gov (United States)

Abrahamson, Warren G; Armbruster, Paulette O; Maddox, G David

1983-06-01

The field site conditions (soil pH, soil moisture, soil nutrient availability, etc.) and abundances of Solidago altissima (often included in S. canadensis sensu lato), three S. altissima specific stem gall formers, and the parasitepredator guilds for two of the three gall insects were investigated. It was found that S. altissima is tolerant of a wide range of site conditions. Herbivore (stem gall insects) occurrences were positively correlated with plant occurrence, in a linear fashion. However, there was no disproportionate increase in stem gall insect densities with plant density as might be predicted by the resource concentration hypothesis. Parasitoid guilds were exploiting stem gall insect populations over a wide range of occurrence, but were under-utilizing fields of higher herbivore occurrences. Path analysis showed a high degree of predictability in the causal models, with all but 14% of the ball gall parasitoid guild and all but 43% of the elliptical gall parasitoid guild occurrences explained by the direct influences of stem gall insect occurrence and the indirect influences of goldenrod occurrence and site conditions. The numerical relations of this three trophic level system suggest a well-integrated and well-controlled food chain.

Diversity of gall-inducing insects in the high altitude wetland forests in Pernambuco, Northeastern Brazil

Directory of Open Access Journals (Sweden)

JC Santos

Full Text Available We report on the richness of galling insects in the altitudinal wetland forests of Pernambuco State, Northeastern Brazil. We found 80 distinct types of insect galls on 49 species of host plants belonging to 28 families and 35 genera. Most of the galled plant species belong to Nyctaginaceae, Fabaceae, Meliaceae, Sapindaceae and Myrtaceae. The most common gall were spheroid and globoid; most galls were glabrous, predominantly green and with one chamber, and on the leaves. Most galls were induced by Cecidomyiidae (Diptera. The results of this study contribute to existing knowledge richness of galling insects and host-plant diversity in the altitudinal wetland forests of Northeastern Brazil.

Morphological alterations of the gall-bladder following extracorporeal shock-wave lithotripsy

International Nuclear Information System (INIS)

Schumacher, K.A.; Zoeller, A.; Swobodnik, W.; Janowitz, P.

1990-01-01

The present study reports on 51 patients with symptomatic cholecystolithiasis, who accordingly underwent extracorporeal shock-wave lithotripsy (ESWL). In all cases, computed tomography (CT) was performed prior to and after the therapeutic procedure to delineate changes in gall-bladder morphology. Slight edematous thickening of the gall-bladder wall was found in 15 patients. One patient presented a rupture of the gall-bladder with formation of a bilioma in the adjacent liver tissue. In case of calcific concrements, CT revealed a characteristic pattern of fragment distribution following shock-wave treatment, and fragments of various sizes exhibited distinct adhesion to the gall-bladder wall. (orig.) [de

Gall-inducing insects of deciduous and semideciduous forests in Rio Grande do Sul State, Brazil

Directory of Open Access Journals (Sweden)

Ana Paula M. Goetz

2018-06-01

Full Text Available ABSTRACT Galls are specific changes induced by insects on plant organs mainly through increases in plant cell number and/or size. Gall diversity is easy to recognize in the field because gallers are mostly species-specific, and thus each gall morphotype can be a proxy for a galling species. Insect galls are virtually unknown in Seasonal Deciduous and Semi-Deciduous forests of southern Brazil. Here, galls and host plants were surveyed between 2015 and 2017 in four forest fragments of Rio Grande do Sul State in these two vegetation types, in secondary-growth and areas under restoration. We recorded 89 gall morphotypes, with gallers belonging to Lepidoptera and Diptera, with the latter represented mainly by Cecidomyiidae. Galls were associated to 46 plant species in 27 families. Asteraceae, Piperaceae, Fabaceae, Myrtaceae and Lauraceae were the richest families in terms of galls, whilst Piper aduncum and Mikania glomerata were superhosts. Most galls occurred in leaves and shoots. The most common shapes were fusiform, globoid and lenticular. Forty-eight gall morphotype records are new for both Rio Grande do Sul and Brazil, an expressive number considering only two seasonal forest types sampled and few sampling points, showing how important surveys still are for these little know fauna both in taxonomic and ecological terms.

Life History of the Camelthorn Gall Leafhopper, Scenergates viridis (Vilbaste (Hemiptera, Cicadellidae

Directory of Open Access Journals (Sweden)

Roman Rakitov

2012-01-01

Full Text Available The world’s only member of Hemiptera Auchenorrhyncha known to form true galls, the leafhopper Scenergates viridis (Vilbaste (Cicadellidae, transforms leaves of camelthorn (Alhagi maurorum Medikus, Fabaceae into pod-like chambers, up to 35 mm long, inside which individual leafhoppers develop, mate, and lay eggs. At the study site 40 km SE of Bukhara (Uzbekistan, two generations develop annually. First-instar nymphs cause young leaves to fold along the midrib. The subsequent development takes place inside the tightly closed growing gall, plugged at both ends with a mixture of leafhopper excrement, brochosomes, and crushed exuviae. These plugs act as mechanical barriers and sticky traps for intruders. The inner surface of the gall, lined with brochosomes and wax platelets, is hydrophobic. Adult males emerge from their galls and squeeze into female galls. Fertilized females insert an average of 146 eggs under the gall’s inner epidermis and remain inside, possibly protecting the brood, until they die. The walls of the galls containing eggs are approximately three times thicker than regular leaves. The galls are subject to predation by Gelechiidae caterpillars; the eggs of the leafhopper are parasitized by two species of Trichogrammatidae and one Mymaridae (Hymenoptera, and its larvae by one species of Pipunculidae (Diptera.

Insect galls of restinga areas of Ilha da Marambaia, Rio de Janeiro, Brazil

Directory of Open Access Journals (Sweden)

Alene Ramos Rodrigues

2014-06-01

Full Text Available Insect galls of restinga areas of Ilha da Marambaia, Rio de Janeiro, Brazil. This study carried out an insect gall inventory in restinga areas of Ilha da Marambaia, in the municipality of Mangaratiba, Rio de Janeiro, Brazil. Sampling was carried out monthly from April 2010 to March 2011 along the full extension of seven beaches. A total number of 147 gall morphotypes associated with 70 plant species were found, distributed in 33 plant families, and at least 54 genera. Myrtaceae was the botanical family with the highest richness of gall morphotypes and host species, followed by Bignoniaceae, Fabaceae, Asteraceae, Euphorbiaceae, Sapindaceae, and Malpighiaceae. Most of the gall morphotypes occurred in leaves (78 morphotypes, 38 in stems, 14 in flowers, eight in buds and fruits, and one in adventitious roots. The galling insects belong to the five orders: Diptera, Coleoptera, Hemiptera, Lepidoptera, and Thysanoptera. Cecidomyiidae (Diptera was the most common galling taxon (78 morphotypes, represented by 87 species, being 78 gallers, seven inquilines and two predators. In addition to the gallers, parasitoids, inquilines, and predators were also found.

Variations in the spatial distribution of gall bladder cancer: a call for ...

African Journals Online (AJOL)

Background: The incidence of gall bladder cancers in this part of the world is high and the spatial variation in occurrence of gall bladder cancers can be identified by using geographical information system. Materials and Methods: Data set containing the address information of gall bladder cancer patients from the District of ...

Richness and composition of gall-inducing arthropods at Coiba National Park, Panama

Directory of Open Access Journals (Sweden)

José Luis Nieves-Aldrey

2008-09-01

Full Text Available Interest in studying galls and their arthropods inducers has been growing rapidly in the last two decades. However, the Neotropical region is probably the least studied region for gall-inducing arthropods. A study of the richness and composition of gall-inducing arthropods was carried out at Coiba National Park in the Republic of Panama. Field data come from samples obtained between August 1997 and September 1999, with three (two-week long more intensive samplings. Seventeen sites, representing the main land habitats of Coiba National Park were surveyed. 4942 galls of 50 insect and 9 mite species inducing galls on 50 vascular plants from 30 botanical families were colleted. 62.7% of the galls were induced by gall midges (Diptera, Cecidomyiidae, 15.3% by mites, Eriophyidae, 8.5% by Homoptera, Psyllidae, 6.8% by Coccidae and 5.1% by Phlaeothripidae (Tysanoptera. The host plant families with the most galls were Myrtaceae with seven, Bignoniaceae with five and Euphorbiaceae, Fabaceae and Melastomataceae with four. Leaf galls accounted for about 93% of collected galls. Most leaf galls were pit/blister galls followed by covering and pouch galls. Gall richness per collecting site was between 1 and 19 species. Coiba’s gall diversity is discussed in relation to data available from other tropical sites from continental Panama and the Neotropical region. Our results support the idea that it may be premature to conclude that species richness of gall inducers declines near the equator. Rev. Biol. Trop. 56 (3: 1269-1286. Epub 2008 September 30.El interés por el estudio de las agallas y los artrópodos que las inducen ha crecido en todo el mundo en los últimos veinte años. Sin embargo, los artrópodos que inducen agallas en la región Neotropical son probablemente los menos estudiados. Un estudio de la riqueza y composición de artrópodos que inducen agallas fue desarrollado en el Parque Nacional Coiba en la Republica de Panamá. Los datos provienen de

Meadow-grass gall midge

DEFF Research Database (Denmark)

Hansen, Lars Monrad

The area with meadow-grass (Poa pratensis, L.) grown for seed production in Den-mark is a significant proportion of the entire seed production. The meadow-grass gall midge (Mayetiola schoberi, Barnes 1958) is of considerable economic importance since powerful attacks can reduce the yield...

Effect of pre-plant soil fumigants on Agrobacterium tumefaciens, pythiaceous species, and subsequent soil recolonization by A. tumefaciens

Science.gov (United States)

Paradox (Juglans hindsii x J. regia), the dominant rootstock used in the California walnut industry, is susceptible to crown gall, caused by Agrobacterium tumefaciens. In practice, soil fumigation has been a common preplant management strategy for crown gall, but even an industry standard, methyl b...

An observational study on the association of nonalcoholic fatty liver disease and metabolic syndrome with gall stone disease requiring cholecystectomy

Directory of Open Access Journals (Sweden)

Farah Ahmed

2017-05-01

Conclusion: We found association of metabolic syndrome with gallstones and NAFLD. Non alcoholic fatty liver was highly prevalent in our study subjects. Huge percentage of first degree relatives of gall stone patients had gallstones and this relation was more pronounced patients who had associated NAFLD.

Host manipulation by the orange leafhopper Cicadulina bipunctata: gall induction on distant leaves by dose-dependent stimulation

Science.gov (United States)

Matsukura, Keiichiro; Matsumura, Masaya; Tokuda, Makoto

2009-09-01

The evolution of the gall-inducing ability in insects and the adaptive significance of the galling habit have been addressed by many studies. Cicadulina bipunctata, the maize orange leafhopper, is an ideal study organism for evaluating these topics because it can be mass-reared and it feeds on model plants such as rice ( Oryza sativa) and maize ( Zea mays). To reveal differences between gall inductions by C. bipunctata and other gall inducers, we conducted four experiments concerning (a) the relationship between the feeding site and gall-induction sites of C. bipunctata on maize, (b) the effects of leafhopper sex and density, (c) the effects of length of infestation on gall induction, and (d) the effects of continuous infestation. C. bipunctata did not induce galls on the leaves where it fed but induced galls on other leaves situated at more distal positions. The degree of gall induction was significantly correlated with infestation density and length. These results indicate that C. bipunctata induces galls in a dose-dependent manner on leaves distant from feeding sites, probably by injecting chemical(s) to the plant during feeding. We suggest that insect galls are induced by a chemical stimulus injected by gall inducers during feeding into the hosts.

Genetic background of resistance to gall mite in Ribes species

Directory of Open Access Journals (Sweden)

Ingrida Mazeikiene

2017-06-01

Full Text Available Resistance to gall mite is an important genetic trait of Ribes. P and Ce genes, responsible for gall mite resistance, were established in Ribes species and interspecific hybrids using molecular markers. Resistance in R. americanum is determined by P gene and in R. sanguineum by Ce gene. Both molecular markers were absent in R. dikuscha genome. Molecular markers related to P and Ce genes were identified in the genome of R. aureum. Resistance to gall mite in the field conditions in R. nigrum x R. americanum, R. nigrum x R. aureum and R. nigrum x R. sanguineum F3 hybrids fitted an expected Mendelian segregation ratio of 1:1, 3:1 and 1:1, respectively. 75.0% of hybrids with a pyramidal resistance to gall mite carrying markers related to Ce and P genes were obtained in the cross combination R. nigrum x R. aureum and will be included in the future breeding programs.

Diversity of galling insects in Styrax pohlii (Styracaceae: edge effect and use as bioindicators

Directory of Open Access Journals (Sweden)

Walter Santos de Araújo

2011-12-01

Full Text Available Impacts of forest fragmentation and edge effect on plant-herbivores interactions are relatively unknown, and the relationships between galling insects and their host plants are very susceptible to environmental variations. The goal of our study was to test the edge effect hypothesis for galling insects associated with Styrax pohlii (Styracaceae host plant. Samplings were conducted at a fragment of semi-deciduous forest in Goiânia, Goiás, Brazil. Thirty host plant individuals (15 at fragment edge and 15 in its interior were sampled in July of 2007; in each plant, 10 apical branches were collected at the top, middle and bottom crown levels. Our results supported the prediction of greater richness of gall morphotypes in the edge habitat compared with remnant interior. In a similar way, gall abundance and frequency of attacked leaves were also greater in the fragment edge. These findings consequently suggest a positive response of galling insect diversity to edge effect; in the Saint-Hilaire forest, this effect probably operates through the changes in microclimatic conditions of edge habitats, which results in an increased hygrothermal stress, a determinant factor to distribution patterns of galling insects. We also concluded that these organisms could be employed as biological indicators (i because of their host-specificity, (ii they are sensitive to changes in plant quality, and (iii present dissimilar and specific responses to local variation in habitat conditions. Rev. Biol. Trop. 59 (4: 1589-1597. Epub 2011 December 01.Los impactos de la fragmentación de los bosques y el efecto de borde sobre las interacciones planta-herbívoros son relativamente desconocidos, y las relaciones entre los insectos inductores de agallas y sus plantas hospederas son muy susceptibles a las variaciones ambientales. El objetivo de nuestro estudio fue probar la hipótesis de efecto de borde en los insectos inductores de agallas asociados con la planta hospedera

Effect of Temperature on Galling Behavior of SS 316, 316 L and 416 Under Self-Mated Condition

Science.gov (United States)

Harsha, A. P.; Limaye, P. K.; Tyagi, Rajnesh; Gupta, Ankit

2016-11-01

Galling behavior of three different stainless steels (SS 316, 316 L and 416) was evaluated at room temperature and 300 °C under a self-mated condition. An indigenously fabricated galling tester was used to evaluate the galling performance of mated materials as per ASTM G196-08 standard. The variation in frictional torque was recorded online during the test to assess the onset of galling. The galling50 (G50) stress value was used to compare the galling resistance of a combination of materials, and the results indicate a significant influence of temperature on the galling resistance of the materials tested. This has been attributed to the decrease in hardness and yield strength at elevated temperature which results in softening of the steel and limits its ability to resist severe deformation. Scanning electron micrographs of the galled surface reflected a severe plastic deformation in sliding direction, and a typical adhesive wear mechanism is prevalent during the galling process.

Synchronism between Aspidosperma macrocarpon Apocynaceae resources allocation and the establishment of the gall inducer Pseudophacopteron sp. Hemiptera: Psylloidea

Directory of Open Access Journals (Sweden)

Ariane C Castro¹

2013-12-01

Full Text Available The joint interpretation of phenology and nutritional metabolism provides important data on plant tissues reactivity and the period of gall induction. A population of Aspidosperma macrocarpon Apocynaceae with leaf galls induced by a Pseudophacopteron sp. Psylloidea was studied in Goiás state, Brazil. Assuming the morphological similarity between host leaves and intralaminar galls, a gradient from non-galled leaves towards galls should be generated, establishing a morpho-physiological continuum. The phenology, infestation of galls, and the carbohydrate and nitrogen contents were monthly evaluated in 10-20 individuals, from September 2009 to September 2010. Our objective was to analyze the nutritional status and the establishment of a physiological continuum between the galls and the non-galled leaves of A. macrocarpon. The period of leaf flushing coincided with the highest levels of nitrogen allocated to the new leaves, and to the lowest levels of carbohydrates. The nutrients were previously consumed by the growing leaves, by the time of gall induction. The levels of carbohydrates were higher in galls than in non-galled leaves in time-based analyses, which indicateed their potential sink functionality. The leaves were infested in October, galls developed along the year, and gall senescence took place from March to September, together with host leaves. This first senescent leaves caused insect mortality. The higher availability of nutrients at the moment of gall induction was demonstrated and seems to be important not only for the establishment of the galling insect but also for the responsiveness of the host plant tissues.

Galling Insects of the Brazilian Páramos: Species Richness and Composition Along High-Altitude Grasslands.

Science.gov (United States)

Coelho, Marcel S; Carneiro, Marco Antônio Alves; Branco, Cristina A; Borges, Rafael Augusto Xavier; Fernandes, G Wilson

2017-12-08

In this work, we investigated the factors that determine the distribution of galling insects in high-altitude grasslands, locally called 'campos de altitude' of Mantiqueira Range and tested whether 1) richness of galling insects decreases with altitude, 2) galling insect richness increases with plant richness, 3) variation in galling insect diversity is predominantly a consequence of its β component, and 4) turnover is the main mechanism driving the beta diversity of both galling insects and plants. Galling insect richness did not exhibit a negative relationship with altitude, but it did increase with plant richness. The additive partition of regional richness (γ) into its local and beta components showed that local diversity (α) of galling insects and plants was relatively low in relation to regional diversity; the β component incorporated most of the regional diversity. This pattern was also found in the multiscale analysis of the additive partition for galling insects and plants. The beta diversity of galling insects and plants was driven predominantly by the process of turnover and minimally by nesting. The results reported here point out that the spatial distribution of galling insects is best explained by historical factors, such as the distribution of genera and species of key host plants, as well as their relation to habitat, than ecological effects such as hygrothermal stress - here represented by altitude. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Richness and composition of gall-inducing arthropods at Coiba National Park, Panama

OpenAIRE

Nieves-Aldrey, José Luis; Enrique Medianero, Alicia Ibáñez

2008-01-01

Interest in studying galls and their arthropods inducers has been growing rapidly in the last two decades. However, the Neotropical region is probably the least studied region for gall-inducing arthropods. A study of the richness and composition of gall-inducing arthropods was carried out at Coiba National Park in the Republic of Panama. Field data come from samples obtained between August 1997 and September 1999, with three (two-week long) more intensive samplings. Seventeen sites, represent...

Ecology and evolution of gall-forming insects. Forest Service general technical report

Energy Technology Data Exchange (ETDEWEB)

Price, P.W.; Mattson, W.J.; Baranchikov, Y.N.

1994-09-21

;Partial Contents: Ecology and Population Dynamics; Effects of the Physical Environment on the Ecology of Gall Insects; Biodiversity and Distribution; Genetic Variation in Host Plant Resistance; Evolutionary Perspectives on Gall Insects.

Canada’s Evolving Crown: From a British Crown to a “Crown of Maples”

Directory of Open Access Journals (Sweden)

Romaniuk Scott Nicholas

2014-12-01

Full Text Available This article examines how instruments have changed the Crown of Canada from 1867 through to the present, how this change has been effected, and the extent to which the Canadian Crown is distinct from the British Crown. The main part of this article focuses on the manner in which law, politics, and policy (both Canadian and non-Canadian have evolved a British Imperial institution since the process by which the federal Dominion of Canada was formed nearly 150 years ago through to a nation uniquely Canadian as it exists today. The evolution of the Canadian Crown has taken place through approximately fifteen discrete events since the time of Canadian confederation on July 1, 1867. These fifteen events are loosely categorized into three discrete periods: The Imperial Crown (1867-1930, A Shared Crown (1931-1981, and The Canadian Crown (1982-present.

Lithium absorption by the rabbit gall-bladder

DEFF Research Database (Denmark)

Hansen, C P; Holstein-Rathlou, N H; Skøtt, O

1991-01-01

Lithium (Li+) absorption across the low-resistance epithelium of the rabbit gall-bladder was studied in order to elucidate possible routes and mechanisms of Li+ transfer. Li+ at a concentration of 0.4 mM in both mucosal and serosal media did not affect isosmotic mucosa-to-serosa fluid absorption...... was elicited from the mucosal side and was not accounted for by compensatory Li+ absorption; water and Na+ absorption rates decreased nearly in parallel. The effects of 0.4 mM amiloride and of substitution with 20 mM Li+ were only partly additive. It is concluded that Li+ absorption in the rabbit gall...

Standard test method for galling resistance of material couples

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This test method covers a laboratory test that ranks the galling resistance of material couples using a quantitative measure. Bare metals, alloys, nonmetallic materials, coatings, and surface modified materials may be evaluated by this test method. 1.2 This test method is not designed for evaluating the galling resistance of material couples sliding under lubricated conditions, because galling usually will not occur under lubricated sliding conditions using this test method. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

MRI of perforated gall bladder

International Nuclear Information System (INIS)

Sood, B.; Jain, M.; Khandelwal, N.; Singh, P.; Suri, S.

2002-01-01

Gall bladder perforation is a dreaded complication of acute cholecystitis that, if not diagnosed early in the course, might have a poor prognosis. Both CT and ultrasonography have been used until now extensively for the diagnosis of acute cholecystitis, but diagnosis of perforation is always difficult. Magnetic resonance, by its superior soft tissue resolution and multiplanar capability, is a better modality and should fare better than ultrasonography and CT, as demonstrated in our case. Magnetic resonance imaging demonstrates the wall of the gall bladder and defects to a much better advantage and more convincingly. In addition, MR colangiopancreatography images demonstrate the biliary tree better than other modalities. We suggest that in the case of acute cholecystitis, if perforation is suspected and CT and ultrasonography are not conclusive, MR should be the modality of choice. It can be used as a first line of investigation; however, it might not be cost-effective. Copyright (2002) Blackwell Science Pty Ltd

Complex interactions envolving a gall midge Myrciamyia maricaensis Maia (Diptera, Cecidomyiidae, phytophagous modifiers and parasitoids

Directory of Open Access Journals (Sweden)

Fernando Fortunato Faria Ferraz

2003-09-01

Full Text Available Myrciamyia maricaensis Maia, 1995 (Diptera, Cecidomyiidae induces a gall in lateral and apical shoots in the plant Myrcia lundiana Kiaersk (Myrtaceae which is used and modified by two eulophid wasps species. In both cases the gall former species suffer high rate of attack exceeding the importance of parasitoid species as mortality factors. In this study these interactions are described and their effects as mortality of gall former. The intensity of occurrence of the two eulophid species as modifiers and of microhymenopteran parasitoids, and the relative importance of these species as mortality agents of the M. maricaensis larvae is compared. This comparison reveals that two modifiers species found in the gall tissue modification causing the death of the M. maricaensis larva and it is a more important factor of mortality than the cecidomyiid larva parasitism. The fluctuation of the number of each type of gall along the year was monitored in the research field and confirmed in numerical and in synchronic terms of occurrence of the galls; the importance of the species of the gall modifier eulophids, particularly one of these species, as factors of mortality of the M. maricaensis larvae and justified our comparing the relationship between these species and M. maricaensis as similar to the parasitoid-host relationship. The gall shape modification by one of the eulophids allows the occurrence of other inquiline insect species, what means that this gall modification becomes it more heterogeneous and allows the increase of the species richness to the system.

Dinar-crown banknotes

OpenAIRE

Pantelić Svetlana

2017-01-01

Dinar-crown banknotes were: ½ dinars (i.e. 2 crowns), 1 dinar (i.e. 4 crowns), 5 dinars (i.e. 20 crowns), 10 dinars (i.e. 40 crowns), 20 dinars (i.e. 80 crowns), 100 dinars (i.e. 400 crowns), and 1000 dinars (i.e. 4000 crowns). The ½- and 1-dinar banknotes are assumed to have been issued in 1919, whereas the other five banknotes, according to one source, were released into circulation on 21.02.1920. Pursuant to the regulations, the replacement of the nostrified crown banknotes by the new crow...

Gall blandder kinetics in diabetics. A hepatobiliary scintigraphy overview

International Nuclear Information System (INIS)

Shelley, S.; Indirani, M.; Gokhale, S.; Anirudhan, N.

2004-01-01

Introduction: Hepatobiliary scintigraphy is underutilized in the evaluation of Gall Bladder(GB) function in diabetics when compared to various other imaging modalities that are currently available.It establishes the function of GB in Diabetes mellitus noninvasively, with a quantified ejection fraction thereby helping to resolve the problem of diabetic cholecystopathy, in the evaluation of visceral neuropathy. Aim: To study Gall Bladder kinetics and emptying in diabetic patients. Materials and methods: One forty eight patients of both sexes in the age group of 30 to 70 were included in the study between 1997 to 1999 in our institution.A 90 minute dynamic post mebrofenin study was acquired. A fatty meal of 600 kcal was given to these patients once the Gall Bladder was visualized.Time activity curves were generated and the Gall Bladder contraction in these patients was evaluated.Patients were classified into 3 groups-Group 1 consists of established Diabetic patients. Group 2 consists of patients with impaired glucose tolerance. Group 3 consists of controls. Observation and result: In Group 1 (n=47) ,28 patients (60%) showed reduced ejection fraction and the mean EF% was 44.12 +/- 16.6. In Group 2 (n=48), 18 patients (38%) showed slightly reduced ejection fraction and the mean EF % was 51.56 +/- 15.67. In Group 3(n=53), 7 patients (13%) showed reduced ejection fraction and the meanEF % was 69.77 +/- 13.59. Test of significance was done using 'Z' test also called normal test in large samples. This study has shown that the average Ejection Fraction (in%) is maximum in normal group and least in diabetic group. Conclusion: Hepatobiliary scintigraphy is helpful in early identification of autonomic dysfunction of Gall Bladder in diabetic patients and in patients with impaired glucose tolerance. (authors)

Comparative study of the effects of artesunate and garlic extract on ...

African Journals Online (AJOL)

Crown gall disease causes great economic losses worldwide by reducing crop yields and increases susceptibility to opportunistic pathogens. The anti-malarial Artesunate which is a derivative of artemisinin from Artemisia annua leaf and Garlic extracts known for their inhibitory and cytotoxic effects on the proliferation of ...

Morphogenesis of galls induced by Baccharopelma dracunculifoliae (Hemiptera: Psyllidae on Baccharis dracunculifolia (Asteraceae leaves

Directory of Open Access Journals (Sweden)

M. Arduin

Full Text Available The commonest insect gall on Baccharis dracunculifolia (Asteraceae leaves is induced by Baccharopelma dracunculifoliae (Hemiptera, Psyllidae. The gall-inducing insect attacks young leaves in both the unfolded and the fully expanded stages. Four developmental phases were observed in this type of gall: 1 A folding phase, during which the leaf lamina folded upward alongside the midrib and the edges of the upper portion of the leaf approached each other, forming a longitudinal slit. A single chamber was formed on the adaxial surface of the leaf; 2 A swelling phase, in which the folded leaf tissues thickened and the edges of the leaf drew closer together, narrowing the slit. In this phase the gall matured, turning succulent, fusiform and pale green. The single nymphal chamber was lined with white wax and was able to house from one to several nymphs; 3 A dehiscence phase, characterized by the opening of the slit to release inducers; and 4 A senescence phase, when the gall turned dark and dry. The dermal system of the mature gall was composed of a single-layered epidermis. The mesophyll was swollen, and the swelling was due mainly to hyperplasia of the parenchyma. The vascular tissues along the midrib vein were conspicuous and the perivascular fibers resembled parenchymal cells. The hypertrophied secretory cavities contained low lipophylic content. This gall does not form nutritive tissue, but salivary sheaths left by the inducers were observed near the parenchyma, vascular bundles and secretory cavities. This study complements our current knowledge of gall biology and sheds further light on the plasticity of plant tissues stimulated by biotic factors.

Metatranscriptome Analysis of Fig Flowers Provides Insights into Potential Mechanisms for Mutualism Stability and Gall Induction.

Directory of Open Access Journals (Sweden)

Ellen O Martinson

Full Text Available A striking property of the mutualism between figs and their pollinating wasps is that wasps consistently oviposit in the inner flowers of the fig syconium, which develop into galls that house developing larvae. Wasps typically do not use the outer ring of flowers, which develop into seeds. To better understand differences between gall and seed flowers, we used a metatranscriptomic approach to analyze eukaryotic gene expression within fig flowers at the time of oviposition choice and early gall development. Consistent with the unbeatable seed hypothesis, we found significant differences in gene expression between gall- and seed flowers in receptive syconia prior to oviposition. In particular, transcripts assigned to flavonoids and carbohydrate metabolism were significantly up-regulated in gall flowers relative to seed flowers. In response to oviposition, gall flowers significantly up-regulated the expression of chalcone synthase, which previously has been connected to gall formation in other plants. We propose several genes encoding proteins with signal peptides or associations with venom of other Hymenoptera as candidate genes for gall initiation or growth. This study simultaneously evaluates the gene expression profile of both mutualistic partners in a plant-insect mutualism and provides insight into a possible stability mechanism in the ancient fig-fig wasp association.

Gall bladder carcinoma with ampullary carcinoma: A rare case of double malignancy

Directory of Open Access Journals (Sweden)

Praveer Rai

2013-01-01

Full Text Available Simultaneous double cancers in the biliary system are rare. Most are associated with pancreaticobiliary maljunction (PBM. However, it can occur in patients without PBM. Differentiation between these events is important since these two mechanistic origins imply different stages of disease, as well as different subsequent treatments and prognoses. Herein, we report a case of ampullary carcinoma associated with gall bladder carcinoma diagnosed nonoperatively and palliated with biliary metal stenting.

Developmental pathway from leaves to galls induced by a sap-feeding insect on Schinus polygamus (Cav.) Cabrera (Anacardiaceae).

Science.gov (United States)

Dias, Graciela G; Ferreira, Bruno G; Moreira, Gilson R P; Isaias, Rosy M S

2013-03-01

Galling sap-feeding insects are presumed to cause only minor changes in host plant tissues, because they usually do not require development of nutritive tissues for their own use. This premise was examined through comparison of the histometry, cytometry and anatomical development of non-galled leaves and galls of Calophya duvauae (Scott) (Hemiptera: Calophyidae) on Schinus polygamus (Cav.) Cabrera (Anacardiaceae). Cell fates changed from non-galled leaves to galls during the course of tissue differentiation. C. duvauae caused changes in dermal, ground, and vascular systems of the leaves of S. polygamus. Its feeding activity induced the homogenization of the parenchyma, and the neoformation of vascular bundles and trichomes. The histometric and cytometric data revealed compensatory effects of hyperplasia and cell hypertrophy in the epidermis, with hyperplasia predominating in the adaxial epidermis. There was a balance between these processes in the other tissues. Thus, we found major differences between the developmental pathways of non-galled leaves and galls. These changes were associated with phenotypic alterations related to shelter and appropriate microenvironmental conditions for the gall inducer. The nondifferentiation of a typical nutritive tissue in this case was compared to other non-phylogenetically related arthropod gall systems, and is suggested to result from convergence associated with the piercing feeding apparatus of the corresponding gall-inducer.

Questioning the environmental stress hypothesis for gall diversity of restinga vegetation on dunes

OpenAIRE

Arriola, Ígor A.; F. MeloJr., JoãoCarlos; S. Isaias, RosyMary

2015-01-01

AbstractThe Atlantic Coast Restinga is a mosaic of plant communities with a distinct floristic and phytophysiognomy, exposed to luminous, thermal, and saline stresses. Plants of the restinga must have special features commonly associated to xeric environments, and are expected to host a high diversity of galling herbivores. We studied gall morphotypes, and recorded the diversity of galls on plants growing in sand dunes in a remnant area of restinga (Acaraí State Park) in São Francisco do Sul,...

New gall midges (Diptera, Cecidomyiidae) associated with Eugenia uniflora and Psidium cattleianum (Myrtaceae)

OpenAIRE

Maia,Valéria C; Nava,Dori E

2011-01-01

Two new species and a new genus of gall midges (Diptera, Cecidomyiidae) are described and illustrated. Both species induce leaf galls on Myrtaceae, the former on Eugenia uniflora and the latter on Psidium cattleianum.

Assemblage of filamentous fungi associated with aculeate hymenopteran brood in reed galls.

Science.gov (United States)

Heneberg, Petr; Bizos, Jiří; Čmoková, Adéla; Kolařík, Miroslav; Astapenková, Alena; Bogusch, Petr

2016-01-01

Monotypic stands of common reed and the reed-gall-associated insect assemblages are distributed worldwide. However, fungi associated with these assemblages have not been characterized in detail. Here we examined 5200 individuals (12 species) of immature aculeate hymenopterans or their parasitoids collected at 34 sampling sites in Central Europe. We noticed fungal outgrowth on exoskeletons of 83 (1.60%) larvae and pupae. The most common host was eudominant Pemphredon fabricii. However, the less abundant aculeate hymenopteran reed gall inquilines were infected at higher prevalence, these included Trypoxylon deceptorium, Trypoxylon minus, Hoplitis leucomelana and Hylaeus moricei (all considered new host records). We identified three fungal species, Penicillium buchwaldii (72% of cases), Aspergillus pseudoglaucus (22%) and Penicillium quebecense (6%). When multibrooded nests were affected, only a part of individuals was infected in 62% of cases. The sampling site-specific infection rate reached up to 13%, thus fungal infections should be considered an important variable driving the abundance of gall inquilines. Infections of generalist host species were more frequent than those of reed gall specialists, suggesting that suboptimal conditions decreased the immunocompetence of non-specialized species, which only occasionally nest in reed galls and feed in reed beds. Copyright © 2015 Elsevier Inc. All rights reserved.

Taxonomic identity of a galling adelgid (Hemiptera: Adelgidae) from three spruce species in central Japan

Science.gov (United States)

Masakazu Sano; Nathan P. Havill; Kenichi. Ozaki

2011-01-01

Gall-forming insects are commonly highly host-specific, and galling species once thought to be oligo- or polyphagous are often found to represent a complex of host-specific races or cryptic species. A recent DNA barcoding study documented that an unidentified species of the genus Adelges is a gall-former associated with four spruce species (...

Rhizoctonia crown and root rot disease nursery

Science.gov (United States)

The BSDF cooperative CRR Eastern Evaluation Nursery Rhizoctonia crown and root rot Evaluation Nursery in 2016 was a randomized complete-block design with five replications in 15 feet long, one-row plots (20 in row spacing), at the Saginaw Valley Research and Education Center near Frankenmuth, MI. F...

Primary Lymphoma of the Gall Bladder

African Journals Online (AJOL)

1974-06-29

Jun 29, 1974 ... phomas thus constitute about 10% of all primary sarcomas of the gall ... Department of Pathology, University of Cape Town. J B. C. BOTHA, M.B. CH.B. L. B. KAHN ... mon hepatic duct at its junction with the cystic duct. The.

Potential of UVC germicidal irradiation in suppressing crown rot disease, retaining postharvest quality and antioxidant capacity of Musa AAA "Berangan" during fruit ripening.

Science.gov (United States)

S Mohamed, Nuratika Tamimi; Ding, Phebe; Kadir, Jugah; M Ghazali, Hasanah

2017-09-01

Crown rot caused by fungal pathogen is the most prevalent postharvest disease in banana fruit that results significant economic losses during transportation, storage, and ripening period. Antifungal effects of ultraviolet C (UVC) irradiation at doses varied from 0.01 to 0.30 kJ m -2 were investigated in controlling postharvest crown rot disease, maintenance of fruit quality, and the effects on antioxidant capacity of Berangan banana fruit during ripening days at 25 ± 2°C and 85% RH. Fruits irradiated with 0.30 kJ m -2 exhibited the highest (i.e., 62.51%) reduction in disease severity. However, the application of UVC at all doses caused significant browning damages on fruit peel except the dose of 0.01 kJ m -2 . This dose synergistically reduced 46.25% development of postharvest crown and did not give adverse effects on respiration rate, ethylene production, weight loss, firmness, color changes, soluble solids concentration, titratable acidity, and pH in banana as compared to the other treatments and control. Meanwhile, the dose also enhanced a significant higher level of total phenolic content, FRAP, and DPPH values than in control fruits indicating the beneficial impact of UVC in fruit nutritional quality. The results of scanning electron micrographs confirmed that UVC irradiation retarded the losses of wall compartments, thereby maintained the cell wall integrity in the crown tissue of banana fruit. The results suggest that using 0.01 kJ m -2 UVC irradiation dose as postharvest physical treatment, the crown rot disease has potential to be controlled effectively together with maintaining quality and antioxidant of banana fruit.

Size, age and composition: characteristics of plant taxa as diversity predictors of gall-midges (Diptera: Cecidomyiidae

Directory of Open Access Journals (Sweden)

Walter S Araújo

2011-12-01

Full Text Available Many hypotheses have been proposed to explain the diversity of gall-midge insects (Diptera: Cecidomyiidae, some of them taking into account plant diversity. This study aims to test the importance of size, age and composition of host plant taxa in the diversity of Cecidomyiidae. For this we used inventories data on the diversity of galling and host plants in Brazil. We found that Asterales, Myrtales and Malpighiales, were the most important orders, with 34, 33 and 25, gall morphotypes, respectively. The most representative host families were Asteraceae (34 morphotypes, Myrtaceae (23 and Fabaceae (22. In general, the order size and the plant family were good predictors of the galling diversity, but not the taxon age. The most diverse host genera for gall-midges were Mikania, Eugenia and Styrax, with 15, 13 and nine galler species, respectively. The size of plant genera showed no significant relationship with the richness of Cecidomyiidae, contrary to the prediction of the plant taxon size hypothesis. The plant genera with the greatest diversity of galling insects are not necessarily those with the greatest number of species. These results indicate that some plant taxa have a high intrinsic richness of galling insects, suggesting that the plant species composition may be equally or more important for the diversity of gall-midges than the size or age of the host taxon. Rev. Biol. Trop. 59 (4: 1599- 1607. Epub 2011 December 01.

The gall midges (Diptera, Cecidomyiidae from three restingas of Rio de Janeiro State, Brazil

Directory of Open Access Journals (Sweden)

Valéria Cid Maia

2001-06-01

Full Text Available One hundred and eight species of Cecidomyiinae (Cecidomyiidae were found in association with 53 species of plant distributed among 42 genera and 32 families at restingas of Barra de Maricá, Itaipuaçu and Carapebus. Ninety four gall midge species were cecidogenous, four predaceous, five inquilinous of galls and five were free living. Galling species were associated with 47 plant species belonging to 36 genera and 28 families. The majority of the galls occurred on the leaves (N = 63; 13 on buds; nine on inflorescence, closed flower or flower peduncle; three on fruits and one on tendril. Myrtaceae were the richest plant family in number of galls followed by Burseraceae, Nyctaginaceae, Sapotaceae, Erythroxylaceae, Malpighiaceae and Solanaceae. New records of host plants and localities were recorded. Seventy nine Cecidomyiinae species were found at Restinga of Barra de Maricá, 64 at Carapebus and 41 at Itaipuaçu. Sorensen's index revealed that the restingas of Barra de Maricá and Itaipuaçu ate more similar in Cecidomyiinae fauna, confirming a positive relation between geographical proximity and fauna similarity.

Species turnover drives β-diversity patterns across multiple spatial scales of plant-galling interactions in mountaintop grasslands.

Science.gov (United States)

Coelho, Marcel Serra; Carneiro, Marco Antônio Alves; Branco, Cristina Alves; Borges, Rafael Augusto Xavier; Fernandes, Geraldo Wilson

2018-01-01

This study describes differences in species richness and composition of the assemblages of galling insects and their host plants at different spatial scales. Sampling was conducted along altitudinal gradients composed of campos rupestres and campos de altitude of two mountain complexes in southeastern Brazil: Espinhaço Range and Mantiqueira Range. The following hypotheses were tested: i) local and regional richness of host plants and galling insects are positively correlated; ii) beta diversity is the most important component of regional diversity of host plants and galling insects; and iii) Turnover is the main mechanism driving beta diversity of both host plants and galling insects. Local richness of galling insects and host plants increased with increasing regional richness of species, suggesting a pattern of unsaturated communities. The additive partition of regional richness (γ) into local and beta components shows that local richnesses (α) of species of galling insects and host plants are low relative to regional richness; the beta (β) component incorporates most of the regional richness. The multi-scale analysis of additive partitioning showed similar patterns for galling insects and host plants with the local component (α) incorporated a small part of regional richness. Beta diversity of galling insects and host plants were mainly the result of turnover, with little contribution from nesting. Although the species composition of galling insects and host plant species varied among sample sites, mountains and even mountain ranges, local richness remained relatively low. In this way, the addition of local habitats with different landscapes substantially affects regional richness. Each mountain contributes fundamentally to the composition of regional diversity of galling insects and host plants, and so the design of future conservation strategies should incorporate multiple scales.

Sweet Tetra-Trophic Interactions: Multiple Evolution of Nectar Secretion, a Defensive Extended Phenotype in Cynipid Gall Wasps.

Science.gov (United States)

Nicholls, James A; Melika, George; Stone, Graham N

2017-01-01

Many herbivores employ reward-based mutualisms with ants to gain protection from natural enemies. We examine the evolutionary dynamics of a tetra-trophic interaction in which gall wasp herbivores induce their host oaks to produce nectar-secreting galls, which attract ants that provide protection from parasitoids. We show that, consistent with other gall defensive traits, nectar secretion has evolved repeatedly across the oak gall wasp tribe and also within a single genus (Disholcaspis) that includes many nectar-inducing species. Once evolved, nectar secretion is never lost in Disholcaspis, consistent with high defensive value of this trait. We also show that evolution of nectar secretion is correlated with a transition from solitary to aggregated oviposition, resulting in clustered nectar-secreting galls, which produce a resource that ants can more easily monopolize. Such clustering is commonly seen in ant guard mutualisms. We suggest that correlated evolution between maternal oviposition and larval nectar induction traits has enhanced the effectiveness of this gall defense strategy.

Detection of the onset of galling in strip reduction testing using acoustic emission

DEFF Research Database (Denmark)

Moghadam, Marcel; Christiansen, Peter; Bay, Niels Oluf

2017-01-01

Galling is an important issue in metal forming of tribologically severe materials such as high strength steel, stainless steel, Al- or Ti-alloys, since it leads to poor surface quality of the formed components, production stops and possibly deterioration of tools. The onset of galling is difficult...

Dinar-crown banknotes

Directory of Open Access Journals (Sweden)

Pantelić Svetlana

2017-01-01

Full Text Available Dinar-crown banknotes were: ½ dinars (i.e. 2 crowns, 1 dinar (i.e. 4 crowns, 5 dinars (i.e. 20 crowns, 10 dinars (i.e. 40 crowns, 20 dinars (i.e. 80 crowns, 100 dinars (i.e. 400 crowns, and 1000 dinars (i.e. 4000 crowns. The ½- and 1-dinar banknotes are assumed to have been issued in 1919, whereas the other five banknotes, according to one source, were released into circulation on 21.02.1920. Pursuant to the regulations, the replacement of the nostrified crown banknotes by the new crown- dinar banknotes started on 3 February 1920 in Serbia and Montenegro and on 16 February 1920 in other parts of the country. All seven denominations of the dinar-crown banknotes were being withdrawn from circulation throughout a lengthy period of time from 21 February 1921 until May 1934. The first to be withdrawn were the 20-dinar banknotes, from 1 February to 30 April 1921, then the 5-dinar banknotes, from 20 July to 20 November 1922, and the 10-dinar banknotes, from 10 February to 10 June 1924. The 100-dinar (400-crown and 1000-dinar (4000-crown banknotes remained in circulation the longest. The withdrawal of the 100- and 1000-dinar banknotes started in 1929 and lasted until 25 May 1934. The 1924 rulebook on minting coins of ½, 1 and 2 dinars precisely defines their withdrawal from circulation and replacement by minted coins within one year after the last batch of minted coins gets released into circulation. However, in 1927 the decree of the Minister of Finance prescribed that the remaining paper banknotes be withdrawn from circulation on 30 September 1927 by being replaced by the metal coins of the same denominations.

Nuclear power plant Generic Aging Lessons Learned (GALL). Appendix B

International Nuclear Information System (INIS)

Kasza, K.E.; Diercks, D.R.; Holland, J.W.; Choi, S.U.

1996-12-01

The purpose of this generic aging lessons learned (GALL) review is to provide a systematic review of plant aging information in order to assess materials and component aging issues related to continued operation and license renewal of operating reactors. Literature on mechanical, structural, and thermal-hydraulic components and systems reviewed consisted of 97 Nuclear Plant Aging Research (NPAR) reports, 23 NRC Generic Letters, 154 Information Notices, 29 Licensee Event Reports (LERs), 4 Bulletins, and 9 Nuclear Management and Resources Council Industry Reports (NUMARC IRs) and literature on electrical components and systems reviewed consisted of 66 NPAR reports, 8 NRC Generic Letters, 111 Information Notices, 53 LERs, 1 Bulletin, and 1 NUMARC IR. More than 550 documents were reviewed. The results of these reviews were systematized using a standardized GALL tabular format and standardized definitions of aging-related degradation mechanisms and effects. The tables are included in volumes 1 and 2 of this report. A computerized data base has also been developed for all review tables and can be used to expedite the search for desired information on structures, components, and relevant aging effects. A survey of the GALL tables reveals that all ongoing significant component aging issues are currently being addressed by the regulatory process. However, the aging of what are termed passive components has been highlighted for continued scrutiny. This report consists of Volume 2, which consists of the GALL literature review tables for the NUMARC Industry Reports reviewed for the report

Franz Joseph Gall and music: the faculty and the bump.

Science.gov (United States)

Eling, Paul; Finger, Stanley; Whitaker, Harry

2015-01-01

The traditional story maintains that Franz Joseph Gall's (1758-1828) scientific program began with his observations of schoolmates with bulging eyes and good verbal memories. But his search to understand human nature, in particular individual differences in capacities, passions, and tendencies, can also be traced to other important observations, one being of a young girl with an exceptional talent for music. Rejecting contemporary notions of cognition, Gall concluded that behavior results from the interaction of a limited set of basic faculties, each with its own processes for perception and memory, each with its own territory in both cerebral or cerebellar cortices. Gall identified 27 faculties, one being the sense of tone relations or music. The description of the latter is identical in both his Anatomie et Physiologie and Sur les Fonctions du Cerveau et sur Celles de Chacune de ses Parties, where he provided positive and negative evidences and discussed findings from humans and lower animals, for the faculty. The localization of the cortical faculty for talented musicians, he explained, is demonstrated by a "bump" on each side of the skull just above the angle of the eye; hence, the lower forehead of musicians is broader or squarer than in other individuals. Additionally, differences between singing and nonsinging birds also correlate with cranial features. Gall even brought age, racial, and national differences into the picture. What he wrote about music reveals much about his science and creative thinking. © 2015 Elsevier B.V. All rights reserved.

Patterns of gall infestation in Heteropterys byrsonimifolia A. Juss. in a forest-savannah ecotone

Directory of Open Access Journals (Sweden)

Marcela de Castro Nunes Santos Terra

Full Text Available ABSTRACT Galls are the result of a specific interaction between an inducer and a host plant. The species Heteropterys byrsonimifolia A. Juss. occurs in abundance in semideciduous seasonal forest ecotones and adjacent open formations. In the ecological reserve Quedas do Rio Bonito, located in the state of Minas Gerais, Brazil, this species is affected by a single gall morphotype. The present study aimed to evaluate whether the structural complexity of the host (test of the structural complexity hypothesis and the distance between hosts (test of the resource concentration hypothesis affect gall density in H. byrsonimifolia and to characterize the spatial distribution of the infestation. The results corroborate the two hypotheses tested, suggesting a metapopulation pattern of gall infestation in H. byrsonimifolia. Gallers were more successful in abrupt forest-savannah transition environments, which may be associated with greater stress-induced host vulnerability that plants usually experience in ecotones.

Primary Lymphoma of the Gall Bladder

African Journals Online (AJOL)

1974-06-29

Jun 29, 1974 ... textbooks of pathology.'" We have been able to find only. 11 cases documented in the world literature; and only 4 of these in the English literature..·• They have appeared as isolated case reports or are mentioned in reviews deal- ing with primary sarcomas of the gall bladder. To the best of our knowledge ...

Distribution and prevalence of crown rot pathogens affecting wheat crops in southern Chile

Directory of Open Access Journals (Sweden)

Ernesto Moya-Elizondo

2015-03-01

Full Text Available Crown rot pathogens are associated with higher losses for wheat crop farmers, but information about the distribution and prevalence of these pathogens in Chile is inadequate. Distribution and prevalence of wheat (Triticum aestivum L. crown rot pathogens were examined in a survey of 48 commercial fields from December 2011 to February 2012 in southern Chile. These fields were located between Collipulli (37°56'00" S; 72°26'39" W and Purranque (40°50'30" S; 73°22'03" W. Severity of crown rot disease was determined through visual assessment of the first internode of 20 tillers obtained from each field. Incidence of crown rot pathogens per field was determined by plating the 20 tillers on Petri plates with 20% potato dextrose agar amended with lactic acid (aPDA medium. Resulting fungal colonies from monoxenic culture were identified by morphological or molecular-assisted identification. Severity of crown rot varied between 11.3% and 80% for individual fields. Culture plate analysis showed 72.2% of stems were infected with some fungus. Fusarium avenaceum, F. graminearum, and F. culmorum, pathogens associated with Fusarium crown rot disease were isolated from 13.5% of tillers. Gaeumannomyces graminis, causal agent of take-all disease in cereals, was isolated from 11.1% of culms. Phaeosphaeria sp., an endophyte and possibly a non-pathogenic fungus, was isolated from 13.9% of tillers. Pathogenic fungi such as Rhizoctonia spp. and Microdochium nivale, other saprophyte, and several unidentified non-sporulating fungi were isolated at frequencies lower than 3% of the total. Fusarium crown rot and take-all were the most prevalent and distributed crown rot diseases present in wheat crops in southern Chile.

Quantification of Circulating Free DNA as a Diagnostic Marker in Gall Bladder Cancer.

Science.gov (United States)

Kumari, Swati; Tewari, Shikha; Husain, Nuzhat; Agarwal, Akash; Pandey, Anshuman; Singhal, Ashish; Lohani, Mohtashim

2017-01-01

Gall bladder Carcinoma (GBC) is the fifth most common cancer of the digestive tract and frequently diagnosed in late stage of disease. Estimation of circulating free DNA (cfDNA) in serum has been applied as a "liquid biopsy" in several deep seated malignancies. Its value in diagnosis of gall bladder carcinoma has not been studied. The present study was designed to assess the role of cfDNA in the diagnosis of GBC and correlate levels with the TNM stage. Serum was collected from 34 patients with GBC and 39 age and sex matched controls including 22 cholecystitis and 17 healthy individuals. Serum cfDNA levels were measured through quantitative polymerase chain reaction (qPCR) by amplification of β-globin gene. Performance of the assay was calculated through the receiver operating characteristic (ROC) curve. The cfDNA level was significantly lower in healthy controls and cholecystitis (89.32 ± 59.76 ng/ml, 174.21 ± 99.93 ng/ml) compared to GBC (1245.91 ± 892.46 ng/ml, p = <0.001). The cfDNA level was significantly associated with TNM stage, lymph node involvement and jaundice (0.002, 0.027, and 0.041, respectively). Area under curve of ROC analysis for cancer group versus healthy and cholecystitis group was 1.00 and 0.983 with sensitivity of 100 %, 88.24 % and specificity of 100 % respectively. Quantitative analysis of cfDNA may distinguish cholecystitis and gall bladder carcinoma and may serve as new diagnostic, noninvasive marker adjunct to imaging for the diagnosis of GBC.

Moving your sons to safety: galls containing male fig wasps expand into the centre of figs, away from enemies.

Directory of Open Access Journals (Sweden)

Hui Yu

Full Text Available Figs are the inflorescences of fig trees (Ficus spp., Moraceae. They are shaped like a hollow ball, lined on their inner surface by numerous tiny female flowers. Pollination is carried out by host-specific fig wasps (Agaonidae. Female pollinators enter the figs through a narrow entrance gate and once inside can walk around on a platform generated by the stigmas of the flowers. They lay their eggs into the ovules, via the stigmas and styles, and also gall the flowers, causing the ovules to expand and their pedicels to elongate. A single pollinator larva develops in each galled ovule. Numerous species of non-pollinating fig wasps (NPFW, belonging to other families of Chalcidoidea also make use of galled ovules in the figs. Some initiate galls, others make use of pollinator-generated galls, killing pollinator larvae. Most NPFW oviposit from the outside of figs, making peripherally-located pollinator larvae more prone to attack. Style length variation is high among monoecious Ficus spp. and pollinators mainly oviposit into more centrally-located ovules, with shorter styles. Style length variation is lower in male (wasp-producing figs of dioecious Ficus spp., making ovules equally vulnerable to attack by NPFW at the time that pollinators oviposit. We recorded the spatial distributions of galled ovules in mature male figs of the dioecious Ficus hirta in Southern China. The galls contained pollinators and three NPFW that kill them. Pollinators were concentrated in galls located towards the centre of the figs, NPFW towards the periphery. Due to greater pedicel elongation by male galls, male pollinators became located in more central galls than their females, and so were less likely to be attacked. This helps ensure that sufficient males survive, despite strongly female-biased sex ratios, and may be a consequence of the pollinator females laying mostly male eggs at the start of oviposition sequences.

Renaissance der KMU in einer globalisierten Wirtschaft : Beiträge zu den Rencontres de St-Gall 1998

OpenAIRE

1998-01-01

Rückblick auf 50 Jahre Rencontres de St-Gall / Review of 50 years Rencontres de St-Gall Karl-Heinz Schmidt Leistungsdifferenzierung als Gegenstand internationaler Forschungskooperation - 50 Jahre Rencontres de St-Gall 17 Thema A: Deregulierung und Branchenentwicklung in der Dienstleistungsgesellschaft / Topic A: Deregulation and the prospects of sectors in the service society Leo W. Chini Die betriebswirtschaftlichen Effekte der von der EU induzierten »Deregulier...

Distributional record of oak gall wasp (Hymenoptera: Cynipidae ...

African Journals Online (AJOL)

m

2011-11-16

Nov 16, 2011 ... following formula: ... Sørensen similarity index is calculated from this formula as: ..... Bayesian phylogenetics and the evolution of gall ... theory. Ecology, 89(7): 1921-1930. Stone GN, Schonrogge K, Atkinson R, Bellido D, ...

Review of the generic aging lessons learned (GALL) report for U.S. NPPs

International Nuclear Information System (INIS)

Gong Yi; Dou Yikang

2014-01-01

Generic aging lessons learned (GALL) report is a technical basis document issued by U.S. nuclear regulatory commission (NRC) for guiding the review of license renewal application (LRA) of its domestic nuclear power plants (NPPs). By form of tabulations, GALL report addresses the correlation among materials, environments, aging effects/mechanisms, and aging management programs (AMPs) from the level of specific structures and/or components. Based on literature investigation and analysis, the essential information of GALL report in the aspects of background, development history, content framework, and application was reviewed in this paper, which should be the first time in China and would have reference value for establishment of both the AMPs and the nuclear safety regulations of extending the lifetime of its NPPs. (authors)

Lithium absorption by the rabbit gall-bladder

DEFF Research Database (Denmark)

Hansen, C P; Holstein-Rathlou, N H; Skøtt, O

1991-01-01

Lithium (Li+) absorption across the low-resistance epithelium of the rabbit gall-bladder was studied in order to elucidate possible routes and mechanisms of Li+ transfer. Li+ at a concentration of 0.4 mM in both mucosal and serosal media did not affect isosmotic mucosa-to-serosa fluid absorption...

Quantification of Galling in Sheet Metal Forming by surface topography characterisation

DEFF Research Database (Denmark)

Andreasen, Jan Lasson; Bay, Niels; De Chiffre, Leonardo

1998-01-01

One of the major problems in forming of stainless steel sheet is galling due to lubricant film breakdown leading to scoring and bad surface quality. In a Danish research programme new lubricants substituting the normally applied chlorinated paraffin oils are being developed and tested...... for this purpose. In order to determine the limits of lubrication of these new lubricants, as well as commercial ones already available on the market, two sheet forming tests have been developed. Quantification of the degree of galling is done by roughness measurements on the workpiece surface. In a strip...

A Rare Case of Parkinson's Disease with Severe Neck Pain Owing to Crowned Dens Syndrome

OpenAIRE

Teruyuki Takahashi; Masato Tamura; Keiichi Osabe; Takashi Tamiya; Kenji Miki; Mai Yamaguchi; Kanno Akira; Satoshi Kamei; Toshiaki Takasu

2014-01-01

Background: Pain is regarded as one of the most common nonmotor symptoms in Parkinson's disease (PD). In particular, musculoskeletal pain has been reported as the most common type of PD-associated pain. Crowned dens syndrome (CDS), related to microcrystalline deposition in the periodontoid process, is the main cause of acute or chronic cervical pain. Case Presentation: This report describes the case of an 87-year-old woman who had severe bradykinesia, muscle rigidity, gait disturbance and nec...

Root interactions in a maize/soybean intercropping system control soybean soil-borne disease, red crown rot.

Directory of Open Access Journals (Sweden)

Xiang Gao

Full Text Available BACKGROUND: Within-field multiple crop species intercropping is well documented and used for disease control, but the underlying mechanisms are still unclear. As roots are the primary organ for perceiving signals in the soil from neighboring plants, root behavior may play an important role in soil-borne disease control. PRINCIPAL FINDINGS: In two years of field experiments, maize/soybean intercropping suppressed the occurrence of soybean red crown rot, a severe soil-borne disease caused by Cylindrocladium parasiticum (C. parasiticum. The suppressive effects decreased with increasing distance between intercropped plants under both low P and high P supply, suggesting that root interactions play a significant role independent of nutrient status. Further detailed quantitative studies revealed that the diversity and intensity of root interactions altered the expression of important soybean PR genes, as well as, the activity of corresponding enzymes in both P treatments. Furthermore, 5 phenolic acids were detected in root exudates of maize/soybean intercropped plants. Among these phenolic acids, cinnamic acid was released in significantly greater concentrations when intercropped maize with soybean compared to either crop grown in monoculture, and this spike in cinnamic acid was found dramatically constrain C. parasiticum growth in vitro. CONCLUSIONS: To the best of our knowledge, this study is the first report to demonstrate that intercropping with maize can promote resistance in soybean to red crown rot in a root-dependent manner. This supports the point that intercropping may be an efficient ecological strategy to control soil-borne plant disease and should be incorporated in sustainable agricultural management practices.

Seasonal variation of phenolic content in galled and non-galled tissues of Calliandra brevipes Benth (Fabaceae: Mimosoidae Variação sazonal do conteúdo fenólico em tecidos galhados e não-galhados de Calliandra brevipes Benth (Fabaceae: Mimosoidae

Directory of Open Access Journals (Sweden)

Michelle de Lima Detoni

2011-09-01

Full Text Available Two species, Tanaostigmodes ringueleti and T. mecanga, induce distinct galls on Calliandra brevipes Benth (Fabaceae: Mimosoidae, a globose and a fusiform gall morphotype. Seasonal changes of phenolic content in the tissues of the two distinct galls were compared to those of non-galled leaves and stems of the host plants over one year. The variation in the phenolic content profiles was similar in both non-galled and galled tissues, and was primarily associated with changes in the levels of rainfall, indicating a direct response to hydric stress. In periods of drastic changes in water precipitation, the alterations were significantly higher in non-galled than in galled tissues suggesting that the gall inducers might limit the variation in the phenolic concentration for their own benefit.Duas espécies, Tanaostigmodes ringueleti e T. mecanga, induzem galhas distintas em Calliandra brevipes Benth (Fabaceae: Mimosoidae, um morfotipo globoso e um fusiforme. Mudanças sazonais no conteúdo fenólico nos tecidos das duas galhas foram comparadas àquelas de folha e caule não galhados das plantas hospedeiras por um ano. A variação no perfil de conteúdo fenólico foi similar em tecidos galhados e não galhados, sendo associada primariamente às mudanças nos níveis de chuva, constituindo uma resposta direta ao estresse hídrico. Nos períodos de mudanças drásticas na precipitação de água, as alterações foram significativamente maiores em tecido não galhados do que em tecidos galhados, sugerindo que os galhadores estariam limitando a variação do conteúdo fenólico em seu próprio benefício.

Moessbauer spectrometry applied to the study of laboratory samples made of iron gall ink

International Nuclear Information System (INIS)

Burgaud, C.; Rouchon, V.; Refait, P.; Wattiaux, A.

2008-01-01

Iron gall inks consist of a mixture of vitriol, gall nut extracts and gum arabic. The association of the iron(II) sulphate present in vitriols, and the carboxyphenolic acids present in gall nut extracts leads to the formation of dark coloured iron-based precipitates. In order to evaluate the percentage of iron used in the formation of these precipitates, transmission Moessbauer spectroscopy (MS) measurements were performed on laboratory made inks at room temperature. These were completed by X-ray diffraction (XRD), and Raman spectroscopy measurements. The samples consisted of several solutions of iron(II) sulphate, gallic acid and gum arabic. After evaporation, the residues were analysed. Up to eight different Moessbauer signatures were detected, most of them correlated to iron sulphates. The Moessbauer signature of the iron gall precipitate was also isolated. It is not distinctly defined and may overlap with the signatures of iron(III) hydroxy-sulphates, such as jarosite or copiapite. Raman spectrometry then proved to be a useful complementary technique for the identification of the precipitate. (orig.)

A NEW SPECIES OF INVASIVE GALL WASP (HYMENOPTERA: EULOPHIDAE: TETRASTICHINAE) ON BLUE GUM (EUCALYPTUS GLOBULUS) IN CALIFORNIA

Science.gov (United States)

The blue gum gall wasp, Selitrichodes globulus La Salle & Gates (Hymenoptera: Eulophidae: Tetrastichinae), is described as an invasive gall inducer on blue gum, Eucalyptus globulus (Myrtaceae), in California....

Crown-rise and crown-length dynamics: applications to loblolly pine

Science.gov (United States)

Harry T. Valentine; Ralph L. Amateis; Jeffrey H. Gove; Annikki. Makela

2013-01-01

The original crown-rise model estimates the average height of a crown-base in an even-aged mono-species stand of trees. We have elaborated this model to reduce bias and prediction error, and to also provide crown-base estimates for individual trees. Results for the latter agree with a theory of branch death based on resource availability and allocation.We use the...

Etiology and Population Genetics of Colletotrichum spp. Causing Crown and Fruit Rot of Strawberry.

Science.gov (United States)

Ureña-Padilla, A R; Mackenzie, S J; Bowen, B W; Legard, D E

2002-11-01

ABSTRACT Isolates of Colletotrichum spp. from diseased strawberry fruit and crowns were evaluated to determine their genetic diversity and the etiology of the diseases. Isolates were identified to species using polymerase chain reaction primers for a ribosomal internal transcribed spacer region and their pathogenicity was evaluated in bioassays. Isolates were scored for variation at 40 putative genetic loci with random amplified polymorphic DNA and microsatellite markers. Only C. acutatum was recovered from diseased fruit. Nearly all isolates from crowns were C. gloeosporioides. In crown bioassays, only isolates of C. gloeosporioides from strawberry caused collapse and death of plants. A dendrogram generated from the genetic analysis identified several primary lineages. One lineage included isolates of C. acutatum from fruit and was characterized by low diversity. Another lineage included isolates of C. gloeosporioides from crowns and was highly polymorphic. The isolates from strawberry formed distinctive clusters separate from citrus isolates. Evaluation of linkage disequilibrium among polymorphic loci in isolates of C. gloeosporioides from crowns revealed a low level of disequilibrium as would be expected in sexually recombining populations. These results suggest that epidemics of crown rot are caused by Glomerella cingulata (anamorph C. gloeosporioides) and that epidemics of fruit rot are caused by C. acutatum.

First molecular detection and characterization of Marek's disease virus in red-crowned cranes (Grus japonensis): a case report.

Science.gov (United States)

Lian, Xue; Ming, Xin; Xu, Jiarong; Cheng, Wangkun; Zhang, Xunhai; Chen, Hongjun; Ding, Chan; Jung, Yong-Sam; Qian, Yingjuan

2018-04-03

Marek's disease virus (MDV) resides in the genus Mardivirus in the family Herpesviridae. MDV is a highly contagious virus that can cause neurological lesions, lymphocytic proliferation, immune suppression, and death in avian species, including Galliformes (chickens, quails, partridges, and pheasants), Strigiformes (owls), Anseriformes (ducks, geese, and swans), and Falconiformes (kestrels). In 2015, two red-crowned cranes died in Nanjing (Jiangsu, China). It was determined that the birds were infected with Marek's disease virus by histopathological examination, polymerase chain reaction (PCR), gene sequencing and sequence analysis of tissue samples from two cranes. Gross lesions included diffuse nodules in the skin, muscle, liver, spleen, kidney, gizzard and heart, along with liver enlargement and gizzard mucosa hemorrhage. Histopathological assay showed that infiltrative lymphocytes and mitotic figures existed in liver and heart. The presence of MDV was confirmed by PCR. The sequence analysis of the Meq gene showed 100% identity with Md5, while the VP22 gene showed the highest homology with CVI988. Furthermore, the phylogenetic analysis of the VP22 and Meq genes suggested that the MDV (from cranes) belongs to MDV serotype 1. We describe the first molecular detection of Marek's disease in red-crowned cranes based on the findings previously described. To our knowledge, this is also the first molecular identification of Marek's disease virus in the order Gruiformes and represents detection of a novel MDV strain.

Persistent bacteraemia caused by Staphylococcus aureus in the gall bladder.

Science.gov (United States)

Yu, Alexander Tin Han; Cun, Tony; Benamu, Esther; Renault, Cybele

2017-11-08

Staphylococcus aureus bacteraemia (SAB) remains a complex disease with a high associated morbidity and mortality, especially when it is able to establish an occult nidus safe from antimicrobial eradication. Without rapid identification and intervention, the nidus can cause persistent relapse of disease, morbidity and mortality. Having a high clinical suspicion for the foci of occult S. aureus is important, and awareness of potential sites of infection is critical and can be life-saving.We present a unique case of a 65-year-old man with end-stage renal disease receiving haemodialysis who developed septic shock from SAB. Despite 18 days of appropriate antibiotics, the patient had persistent high-grade bacteraemia until his gall bladder was ultimately percutaneously drained. The day after drainage, he cleared his blood cultures, although he ultimately passed away as he decided to transition his care to focus on comfort measures. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

A simple and stable method of tagging Agrobacterium fabrum C58 for environmental monitoring

Directory of Open Access Journals (Sweden)

Meriam BOURI

2017-05-01

Full Text Available Agrobacterium fabrum is one of the eleven Agrobacterium spp. complex species that has been observed to carry a Ti plasmid and induce crown gall, a disease causing significant damage to economically important perennial agricultural crops. Members of this species complex, including A. fabrum, are morphologically indistinguishable from one another on culture media and are known to grow together in soil and within host galls. Consequently, the tracking of this species in its natural environment requires a cautious approach to tagging strains without altering any of their ecologically important traits. A gentamicin resistant cassette (aacC1 was inserted, by homologous recombination, into a non-coding region of the A. fabrum C58 chromosome between the genes atu1182 and atu1183. The resultant strain did not show any significant in vitro growth differences compared to the wild-type strain, and the marker was stable in rich medium, both with and without selective pressure. The mutant/marked strain was indistinguishable from the parental strain for ability to induce galls, grow in bulk soil and colonize the rhizosphere of tomato plants. Easy, precise, safe and stable tagging of the A. fabrum C58 genome facilitates environmental population surveys by either simple selection or direct detection by PCR. This methodology provides understanding of the ecology of this species complex as an integral part of managing the soil microbiota for improved crown gall management.

Influence of surface texture on the galling characteristics of lean duplex and austenitic stainless steels

DEFF Research Database (Denmark)

Wadman, Boel; Eriksen, J.; Olsson, M.

2010-01-01

Two simulative test methods were used to study galling in sheet forming of two types of stainless steel sheet: austenitic (EN 1.4301) and lean duplex LDX 2101 (EN 1.4162) in different surface conditions. The pin-on-disc test was used to analyse the galling resistance of different combinations of ...

New gall midges (Diptera, Cecidomyiidae) associated with Eugenia uniflora and Psidium cattleianum (Myrtaceae)

OpenAIRE

Maia, Valéria C; Nava, Dori E

2011-01-01

Two new species and a new genus of gall midges (Diptera, Cecidomyiidae) are described and illustrated. Both species induce leaf galls on Myrtaceae, the former on Eugenia uniflora and the latter on Psidium cattleianum. Duas novas espécies e um novo gênero de insetos galhadores (Diptera, Cecidomyiidae) são descritos e ilustrados. Ambas espécies induzem galhas foliares em Myrtaceae, a primeira em Eugenia uniflora e a segunda em Psidium cattleianum.

Retrospective Study of Retention of Stainless Steel Crowns and Pre-veneered Crowns on Primary Anterior Teeth.

Science.gov (United States)

Lopez-Loverich, Angela M; Garcia, Maria Minerva; Donly, Kevin J

2015-01-01

The purpose of this retrospective chart review was to explore the retention of anterior pre-veneered stainless steel crowns (NuSmile) and conventional stainless steel crowns (3M ESPE) placed on primary anterior teeth. Records for children were reviewed over four years using the electronic record system axiUm. Data collected included child's age at time of crown placement, date of placement, tooth number, type of crown, patient behavior, treatment environment, provider type, crown presence, absence, and cementation success or failure at subsequent recall visits. A total of 637 anterior crowns in children treated with either or both crown types met this study's inclusion criteria. Of these crowns, 483 were NuSmile Signature crowns and 154 were stainless steel crowns. There was a nine percent failure rate for the NuSmile Signature crowns and a seven percent failure rate for the stainless steel crowns. There was no statistically significant difference in crown retention rates between the two groups (P<0.05). A full-coverage restoration that can follow the lifespan of the primary anterior dentition in high-risk children is needed. The results from this study indicate good crown retention rates for both crown types with no statistically significant difference between them (P<0.05).

Life history of the gall-maker Eugeniamyia dispar Maia, Mendonça-Jr. & Romanowski, 1996 (Diptera, Cecidomyiidae

Directory of Open Access Journals (Sweden)

M. de S.,Jr. MENDONÇA

Full Text Available The development of the galls of the midge Eugeniamyia dispar Maia, Mendonça-Jr. & Romanowski, 1996 (Diptera: Cecidomyiidae was monitored weekly on its host plant, Eugenia uniflora (Myrtaceae. The work was carried out in the urban area of Porto Alegre, RS, Brazil, from October 1993 to September 1995. Galls were collected from the field and raised in the laboratory to obtain adults. The females oviposit on young leaves of the host plant, with the first instar larvae inducing the gall, which is unilocular. The last instar larvae drop to the soil to pupate and later emerge as adults. The galls occur from late August to early June, when young leaves of the host can be found, with populations peaking during the summer. So far this species is only known from the two southernmost states of Brazil (RS and SC.

Life history of the gall-maker Eugeniamyia dispar Maia, Mendonça-Jr. & Romanowski, 1996 (Diptera, Cecidomyiidae).

Science.gov (United States)

Mendonça, M de S; Romanowski, H P

2002-05-01

The development of the galls of the midge Eugeniamyia dispar Maia, Mendonça-Jr. & Romanowski, 1996 (Diptera: Cecidomyiidae) was monitored weekly on its host plant, Eugenia uniflora (Myrtaceae). The work was carried out in the urban area of Porto Alegre, RS, Brazil, from October 1993 to September 1995. Galls were collected from the field and raised in the laboratory to obtain adults. The females oviposit on young leaves of the host plant, with the first instar larvae inducing the gall, which is unilocular. The last instar larvae drop to the soil to pupate and later emerge as adults. The galls occur from late August to early June, when young leaves of the host can be found, with populations peaking during the summer. So far this species is only known from the two southernmost states of Brazil (RS and SC).

Genetic and biochemical basis of Gall Midge resistance in some cultivars of Indica Rice. Final report for the period 1 October 1980 - 30 November 1986

International Nuclear Information System (INIS)

Reddy, G.M.

1986-01-01

The stability of high productivity of modern rice varieties is greatly affected by insect pests. Rice gall midge is a serious insect pest of rice that is prevalent in several south eastern asian countries. Gall midge resistance has been mainly attributed to antibiosis. No progress has so far been made in identifying the exact biochemical nature of resistance. In Indica subspecies the understanding of chemical nature of disease would be helpful in the control of the disease and also in breeding programme aimed at developing resistance varieties. Studies were undertaken to establish the biochemical basis of resistance. Biochemical characterization of resistant and susceptible varieties were carried out. The parameters considered were: total sugar and reducing sugar content, total phenol content, amino acid profile, post infectional changes in sugar and phenol, isozyme studies. 2 figs, 6 tabs

Genetic and biochemical basis of Gall Midge resistance in some cultivars of Indica Rice. Final report for the period 1 October 1980 - 30 November 1986

Energy Technology Data Exchange (ETDEWEB)

Reddy, G M [Osmania Univ., Hyderabad (India). Dept. of Genetics

1987-12-31

The stability of high productivity of modern rice varieties is greatly affected by insect pests. Rice gall midge is a serious insect pest of rice that is prevalent in several south eastern asian countries. Gall midge resistance has been mainly attributed to antibiosis. No progress has so far been made in identifying the exact biochemical nature of resistance. In Indica subspecies the understanding of chemical nature of disease would be helpful in the control of the disease and also in breeding programme aimed at developing resistance varieties. Studies were undertaken to establish the biochemical basis of resistance. Biochemical characterization of resistant and susceptible varieties were carried out. The parameters considered were: total sugar and reducing sugar content, total phenol content, amino acid profile, post infectional changes in sugar and phenol, isozyme studies. 2 figs, 6 tabs.

Collective biology of neoplastic disease in dicotyledonous plants

International Nuclear Information System (INIS)

Chela-Flores, J.

1987-07-01

We discuss the two different responses from the angiosperms to the specific molecular mechanisms of the tumor-inducing agent contained in the bacterium Agrobacterium tumefaciens. This is done in terms of the collective variables for expressing genetic response to a continuously varying supply of energy from metabolic pathways. We are led to the conjecture that the expression of the recessive oncogenes may not be restricted to humans (retinoblastoma and osteosarcoma), but may also occur in plants (crown gall), and be expressed through a heat-shock. (author). 11 refs

Penicillium cecidicola, a new species on cynipid insect galls on Quercus pacifica in the western United States

DEFF Research Database (Denmark)

Seifert, K.A.; Hoekstra, E.H.; Frisvad, Jens Christian

2004-01-01

A synnematous species of Penicillium subgenus Biverticillium was found inside emergence tunnels from insect galls (Cynipidae, Hymenoptera, the so-called gall wasps) on scrub oaks (Quercus pacifica Nixon & C.H. Muller) collected in the western United States. The fungus produces synnemata with white...... isolates exposed to light after 10 days. The fungus produces the extrolite apiculide A and a series of unidentified extrolites also produced by P. panamense. The oak gall species is described here as Penicillium cecidicola and compared with similar species. An ITS phylogeny suggests that P. cecidicola...

The gall mites Vasates quadripedes and Cecidophyopsis psilaspis (Acari: Eriophyidae) new to Denmark

DEFF Research Database (Denmark)

Bruun, Hans Henrik; Soika, Grazyna

2013-01-01

We report the first records from Denmark of the gall mite species Vasates quadripedes Shimer, 1869 and Cecidophyopsis psilaspis (Nalepa, 1893). V quadripedes is native to North America and forms pouch galls on leaves of some American species of maple. In Europe, it has been found on planted silver...... maple, Acer saccharinum L., only. The species has spread across Europe in recent years. C. psilaspis forms bud galls of species of Taxus in Europe only the native Taxus baccata L. The species is native to Europe and has been introduced to North America....

Assessment of crown angulations, crown inclinations, and tooth size discrepancies in a South Indian population

Directory of Open Access Journals (Sweden)

Geeta Maruti Doodamani

2011-01-01

Full Text Available Aims and Objective: The aim of this study was to assess crown angulations, crown inclinations, and tooth size discrepancy in a sample population from Davangere, South India. Materials and Methods: One hundred adults (50 male and 50 female of age 18-30 years, with Angle′s class I ideal occlusion and balanced profiles, were selected for the study. Study models were prepared and crown angulations and crown inclinations were measured using a customized protractor device. Bolton′s analysis was used to measure the tooth size discrepancies. Results: Maxillary and mandibular teeth had less crown angulations. Maxillary and mandibular incisors and maxillary molars showed increased crown inclinations, whereas mandibular molars and premolars had less crown inclinations than the original Andrews sample. The mean maxillary and mandibular tooth size ratios, overall and anterior, were similar to Bolton′s ratios. Conclusions: The finding of this study indicates that there are possible racial and ethnic factors contributing to variations in crown angulations and crown inclinations.

Comunidades de insetos galhadores (Insecta em diferentes fisionomias do cerrado em Minas Gerais, Brasil Galling insect (Insecta communities in different "cerrado" physiognomies in Minas Gerais, Brazil

Directory of Open Access Journals (Sweden)

Silmary J. Gonçalves-Alvim

2001-07-01

Full Text Available Studies on the communities of galling insects and their host plants were performed in three "cerrado" physiognomies that occur in Minas Gerais: "campo sujo", "cerrado" sensu strictu, and "cerradão". Galls and host plants were collected along transects in a total of 3,000 herbs, 300 shrubs and 135 trees in each physiognomy. Ninety two species of galling insects (morphotypes on 62 host plant species of 28 families were found. The highest galling insect richness was observed in the "cerrado". Approximately 75.0% of galling insects belonged to the Cecidomyiidae (Diptera. The highest gall frequency was found on leaves (58.70% of the host plants, and was glabrous (83.70%. Most gall shape were elliptic (30.43%. A low similarity in galling insect species was observed among the three sampled physiognomies - the highest similarity index was observed between "cerrado" and "campo sujo" (SΦrensen index = 0.20, indicating that the presence of rare species of galling insects might be common in these environments.

Evidence for a stress hypothesis: hemiparasitism effect on the colonization of Alchornea castaneaefolia A. Juss.uphorbiaceae) by Galling Insects

OpenAIRE

SCHWARTZ, Gustavo; HANAZAKI, Natalia; SILVA, Marivana B.; IZZO, Thiago J.; BEJAR, María E. P.; MESQUITA, Mariana R.; FERNANDES, G. Wilson

2003-01-01

Stressed plants are generally more attacked by galling insects. In this study we investigated the relationship between population abundance and species richness of galling insects on the tree Alchornea castaneaefolia A. JUSS. (Euphorbiaceae), submited to stress induced by the hemiparasite Psittacanthus sp. (Loranthaceae) in the Amazon, Brazil. Branches of A. castaneaefolia attacked by the hemiparasite were more heavily infested by galling insects than non-attacked branches. The field observat...

Gall midges (Diptera: Cecidomyiidae) new to the Danish fauna

DEFF Research Database (Denmark)

Haarder, Simon; Bruun, Hans Henrik; Harris, Keith M.

2016-01-01

First records of twenty-three gall midge species in Denmark are reported: Asphondylia ervi Rübsaamen, Contarinia acetosellae Rübsaamen, C. viburnorum Kieffer, Dasineura astragalorum (Kieffer), D. fructum (Rübsaamen), D. harrisoni (Bagnall), D. lotharingiae (Kieffer), D. papaveris (Winnertz), D...

Phylogeny of Rhus gall aphids (Hemiptera:Pemphigidae) based on combined molecular analysis of nuclear EF1α and mitochondrial COII genes

Science.gov (United States)

Zi-xiang Yang; Xiao-ming Chen; Nathan P. Havill; Ying Feng; Hang. Chen

2010-01-01

Rhus gall aphids (Fordinae : Melaphidini) have a disjunct distribution in East Asia and North America and have specific host plant relationships. Some of them are of economic importance and all species form sealed galls which show great variation in shape, size, structure, and galling-site. We present a phylogeny incorporating ten species and four...

Computerized tomography of gall bladder cancer

International Nuclear Information System (INIS)

Todua, F.I.; Karmazanovskij, G.G.

1989-01-01

The authors have summed up the experience in the use of computerized tomography (CT) in diagnosis of gall bladder cancer. The investigation of 17 patients with cancer of this site showed a high informative value of the method. A retrospective comparative study of the results of CT and surgical interventions was carried out. It has been concluded that CT makes it possible not only to diagnose malignant lesions of the bile ducts but also to assess a possible scope of a forthcoming operation

Nuclear power plant Generic Aging Lessons Learned (GALL). Main report and appendix A

Energy Technology Data Exchange (ETDEWEB)

Kaza, K.E.; Diercks, D.R.; Holland, J.W.; Choi, S.U. [and others

1996-12-01

The purpose of this generic aging lessons learned (GALL) review is to provide a systematic review of plant aging information in order to assess materials and component aging issues related to continued operation and license renewal of operating reactors. Literature on mechanical, structural, and thermal-hydraulic components and systems reviewed consisted of 97 Nuclear Plant Aging Research (NPAR) reports, 23 NRC Generic Letters, 154 Information Notices, 29 Licensee Event Reports (LERs), 4 Bulletins, and 9 Nuclear Management and Resources Council Industry Reports (NUMARC IRs) and literature on electrical components and systems reviewed consisted of 66 NPAR reports, 8 NRC Generic Letters, 111 Information Notices, 53 LERs, 1 Bulletin, and 1 NUMARC IR. More than 550 documents were reviewed. The results of these reviews were systematized using a standardized GALL tabular format and standardized definitions of aging-related degradation mechanisms and effects. The tables are included in volume s 1 and 2 of this report. A computerized data base has also been developed for all review tables and can be used to expedite the search for desired information on structures, components, and relevant aging effects. A survey of the GALL tables reveals that all ongoing significant component aging issues are currently being addressed by the regulatory process. However, the aging of what are termed passive components has been highlighted for continued scrutiny. This document is Volume 1, consisting of the executive summary, summary and observations, and an appendix listing the GALL literature review tables.

Nuclear power plant Generic Aging Lessons Learned (GALL). Main report and appendix A

International Nuclear Information System (INIS)

Kasza, K.E.; Diercks, D.R.; Holland, J.W.; Choi, S.U.

1996-12-01

The purpose of this generic aging lessons learned (GALL) review is to provide a systematic review of plant aging information in order to assess materials and component aging issues related to continued operation and license renewal of operating reactors. Literature on mechanical, structural, and thermal-hydraulic components and systems reviewed consisted of 97 Nuclear Plant Aging Research (NPAR) reports, 23 NRC Generic Letters, 154 Information Notices, 29 Licensee Event Reports (LERs), 4 Bulletins, and 9 Nuclear Management and Resources Council Industry Reports (NUMARC IRs) and literature on electrical components and systems reviewed consisted of 66 NPAR reports, 8 NRC Generic Letters, 111 Information Notices, 53 LERs, 1 Bulletin, and 1 NUMARC IR. More than 550 documents were reviewed. The results of these reviews were systematized using a standardized GALL tabular format and standardized definitions of aging-related degradation mechanisms and effects. The tables are included in volumes 1 and 2 of this report. A computerized data base has also been developed for all review tables and can be used to expedite the search for desired information on structures, components, and relevant aging effects. A survey of the GALL tables reveals that all ongoing significant component aging issues are currently being addressed by the regulatory process. However, the aging of what are termed passive components has been highlighted for continued scrutiny. This document is Volume 1, consisting of the executive summary, summary and observations, and an appendix listing the GALL literature review tables

Characterization of the bile and gall bladder microbiota of healthy pigs.

Science.gov (United States)

Jiménez, Esther; Sánchez, Borja; Farina, Annarita; Margolles, Abelardo; Rodríguez, Juan M

2014-12-01

Bile is a biological fluid synthesized in the liver, stored and concentrated in the gall bladder (interdigestive), and released into the duodenum after food intake. The microbial populations of different parts of mammal's gastrointestinal tract (stomach, small and large intestine) have been extensively studied; however, the characterization of bile microbiota had not been tackled until now. We have studied, by culture-dependent techniques and a 16S rRNA gene-based analysis, the microbiota present in the bile, gall bladder mucus, and biopsies of healthy sows. Also, we have identified the most abundant bacterial proteins in the bile samples. Our data show that the gall bladder ecosystem is mainly populated by members of the phyla Proteobacteria, Firmicutes, and Bacteroidetes. Furthermore, fluorescent in situ hybridization (FISH) and transmission electron microscopy (TEM) allowed us to visualize the presence of individual bacteria of different morphological types, in close association with either the epithelium or the erythrocytes, or inside the epithelial cells. Our work has generated new knowledge of bile microbial profiles and functions and might provide the basis for future studies on the relationship between bile microbiota, gut microbiota, and health. © 2014 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

Duodeno gastric reflux in peptic ulcer disease: gall bladder emptying provoked by cholecystokinin or a fatty meal

International Nuclear Information System (INIS)

Harding, L.K.; Donovan, I.A.; Mosimann, F.; Drumm, J.; Alexander-Williams, J.

1986-01-01

A wide range of incidence of diodeno-gastric bile reflux has been reported in patients with duodenal ulcer (DU) or gastric ulcer (GU). Using either 100 units of CCK i/v or a fatty meal of 320 Cal containing 20 g fat to contract the gall bladder, we have investigated the incidence of reflux in 170 subjects: CCK (Control: 20; DU: 60; GU: 19), Meal (Control: 19; DU: 37; GU: 15). The CCK or meal was given in the supine subject 30 minutes after injection of 75 MBq sup(99m)Tc diethyl Hida. Reflux was considered present if labelled bile was seen in the stomach on 3 successive 2 minute gamma camera pictures. The percentage of patients showing reflux was as follows: CCK (Control: 45%; DU: 53%; GU: 58%), Meal (Control: 11%; DU: 24%; GU: 40%). These results have been compared using the Chi-squared test. There was no significant difference in the incidence of reflux between control, DU or GU patients either in the group of patients given CCK or a meal. However, reflux was more common after CCK than the meal in control subjects (p<0.05) and in those with DU (p<0.01) but not in those with GU. We conclude that the stimulus given to contract the gall bladder affects the incidence of reflux, and that any significant difference in reflux incidence of DU or GU patients may become apparent when more patients are studied. (Author)

Actinide/crown ether chemistry

International Nuclear Information System (INIS)

Benning, M.M.

1988-01-01

A structural survey of actinide/crown ether compounds was conducted in order to investigate the solid state chemistry of these complexes. Several parameters - the metal size, crown type, counterion, solvent systems and reaction and crystallization conditions - were varied to correlate their importance in complexation. Under atmospheric conditions, two types of complexes were isolated, those containing only hydrogen-bonded crown interactions and instances where the crown interacts directly with the metal center. In both cases, water seems to play a very important role. When coordinated to the metal, water molecules exhibit the necessary donor properties required for the formation of hydrogen-bonded contacts. The water molecules also provide fierce competition with the crown ethers for metal-binding sites and in most cases prohibit the formation of complexes in which direct metal-ligand association exists. The results of this study indicate that direct interaction between the metal atoms and the crown ethers, in the presence of water, can only occur with polyether conformations which limit the steric replusions within the metal coordination sphere

Fungi associated with fruit crown rot in organic banana (Musa spp. L. in Piura, Peru

Directory of Open Access Journals (Sweden)

René Aguilar Anccota

2013-05-01

Full Text Available The department of Piura is the principal banana-producing zone in Peru, sharing 87% of exportations. In this zone, one of the most important postharvest diseases is crown rot. The economic loses attributed to this disease are estimated to be between 25 and 30% of organic bananas exported. The objective of this study was to identify the causal agents associated with this disease. Samples taken refrigerated fruit from the areas of Querecotillo, Salitral and Mallares were taken and selected after the fact. Thielaviopsis paradoxa, Lasiodiplodia theobromae, Colletotrichum musae and Fusarium verticilloides. In order to demonstrate the pathogenicity of the isolated species, inoculations were given in the area of the crown of the fruit on healthy bananas. These fungi caused symptoms of infection in different proportions, concluding that crown rot is a disease with a complex etiology.

Non-destructive study of iron gall inks in manuscripts

Science.gov (United States)

Duh, Jelena; Krstić, Dragica; Desnica, Vladan; Fazinić, Stjepko

2018-02-01

The aim of this research is to establish an effective procedure of iron gall ink characterization using complementary non-destructive methods. By this, it is possible to better understand correlation of chemical composition of the inks and the state of preservation of iron gall ink manuscripts, as well as the effects of conservation treatment performed upon them. This study was undertaken on a bound 16th century manuscript comprised of different types of paper and ink from the National and University Library in Zagreb. Analytical methods used included Particle Induced X-ray Emission (PIXE) and X-ray Fluorescence (XRF). Paper fibers were identified by optical microscopy and the degradation state, as well as ink differentiation, transit metal migrations and detection of stains, with ultraviolet (UV) and infrared (IR) photography. The techniques applied on original writing materials gave important information about paper and ink composition, its preservation state and efficiency of conservation treatment performed upon them.

Cecidonius pampeanus, gen. et sp. n.: an overlooked and rare, new gall-inducing micromoth associated with Schinus in southern Brazil (Lepidoptera, Cecidosidae).

Science.gov (United States)

Moreira, Gilson R P; Eltz, Rodrigo P; Pase, Ramoim B; Silva, Gabriela T; Bordignon, Sérgio A L; Mey, Wolfram; Gonçalves, Gislene L

2017-01-01

Galls induced by the larval stage of cecidosids (Lepidoptera: Cecidosidae) are complex, multi-trophic systems, still poorly studied. They may be associated with other insect feeding guilds, including inquilines, kleptoparasites, cecidophages, parasitoids, and predators. By causing death of the gall inducer early in life and altering the gall phenotype, inquilines may lead to misidentification of the true gall inducers. Here, we describe through light and scanning electron microscopy Cecidonius pampeanus , a new genus and species of cecidosid moth, from the Pampa biome, south Brazil. It induces unnoticed, small galls under swollen stems of Schinus weinmannifolius Mart. ex Engl. (Anacardiaceae). Such galls are severely attacked early in ontogeny either by unidentified parasitoids belonging to Lyrcus Walker (Pteromalidae) that feed upon the inducer, or by inquiline wasps of the genus Allorhogas Gahan (Braconidae). The inquilines modify the galls into large ones that last longer and promptly call attention. Free-living galls are rare and dehiscent, pupation of C. pampeanus occurring on the ground. Due to these reasons the true inducer has been overlooked in this case for more than a century. Additionally we inferred a phylogeny for Cecidosidae using sequences from mitochondrial and nuclear loci, and characterized genetic variation and gene flow across ten populations. Despite its natural history similarities with the African genus Scyrotis , Cecidonius is a much younger lineage, more closely related to the Neotropical cecidosids. C. pampeanus populations, which are now confined to a few mountain areas within its distribution range due to habitat destruction, are also genetically isolated, requiring conservation measures.

Population Dynamics of Native Parasitoids Associated with the Asian Chestnut Gall Wasp (Dryocosmus kuriphilus in Italy

Directory of Open Access Journals (Sweden)

Tiziana Panzavolta

2018-01-01

Full Text Available Native parasitoids may play an important role in biological control. They may either support or hinder the effectiveness of introduced nonnative parasitoids released for pest control purposes. Results of a three-year survey (2011–2013 of the Asian chestnut gall wasp (ACGW Dryocosmus kuriphilus Yasumatsu (Hymenoptera: Cynipidae populations and on parasitism rates by native indigenous parasitoids (a complex of chalcidoid hymenopterans in Italian chestnut forests are given. Changes in D. kuriphilus gall size and phenology were observed through the three years of study. A total of 13 species of native parasitoids were recorded, accounting for fluctuating parasitism rates. This variability in parasitism rates over the three years was mainly due to the effect of Torymus flavipes (Walker (Hymenoptera: Torymidae, which in 2011 accounted for 75% of all parasitoid specimens yet decreased drastically in the following years. This strong fluctuation may be related to climatic conditions. Besides, our data verified that parasitoids do not choose host galls based on their size, though when they do parasitize smaller ones, they exploit them better. Consequently, ACGWs have higher chances of surviving parasitism if they are inside larger galls.

Anatomical and phenological implications of the relationship between Schinus polygama (Cav.) (Cabrera) and the galling insect Calophya rubra (Blanchard).

Science.gov (United States)

Guedes, L M; Aguilera, N; Ferreira, B G; Becerra, J; Hernández, V; Isaias, R M S

2018-05-01

The success of galling insects could be determined by synchronisation with host plant phenology and climate conditions, ensuring suitable oviposition sites for gall induction and food resources for their survival. The anatomical, histochemical and phenological synchronisation strategies between Calophya rubra (Blanchard) (Hemiptera: Psylloidea) and its host, the evergreen plant Schinus polygama (Cav.) (Cabrera) (Anacardiaceae), in the Mediterranean climate of southern Chile was evaluated and compared to that of the congeneric C. cf. duvauae (Scott) from Brazil and closely related host plant S. engleri in a subtropical climate. Anatomical, histometric, histochemical and vegetative phenology studies of the stem and galls were conducted from June 2015 to December 2016. Based on the anatomical, histometric and histochemical analysis, the conical stem gall traits imply gains over the non-galled stem toward the galling insect survival, but the maintenance of phellem, secretory ducts and pith indicate conservative developmental traits that cannot be manipulated by C. rubra. Our results indicate that the conditions of the Mediterranean climate zone limit C. rubra immature activity during unfavourable periods, probably determining a diapause period and a univoltine life cycle, which are peculiarities of the S. polygama- C. rubra system. The synchronisation between development and seasonality confers peculiarities to the S. polygama- C. rubra system in the Mediterranean climate zone. © 2018 German Society for Plant Sciences and The Royal Botanical Society of the Netherlands.

Diverse filters to sense: great variability of antennal morphology and sensillar equipment in gall-wasps (Hymenoptera: Cynipidae.

Directory of Open Access Journals (Sweden)

Carlo Polidori

Full Text Available Comparative studies on antennal sensillar equipment in insects are largely lacking, despite their potential to provide insights into both ecological and phylogenetic relationships. Here we present the first comparative study on antennal morphology and sensillar equipment in female Cynipoidea (Hymenoptera, a large and diverse group of wasps, with special reference to the so-called gall-wasps (Cynipidae. A SEM analysis was conducted on 51 species from all extant cynipoid families and all cynipid tribes, and spanning all known life-histories in the superfamily (gall-inducers, gall-inquilines, and non-gall associated parasitoids. The generally filiform, rarely clavate, antennal flagellum of Cynipoidea harbours overall 12 types of sensilla: s. placoidea (SP, two types of s. coeloconica (SCo-A, SCo-B, s. campaniformia (SCa, s. basiconica (SB, five types of s. trichoidea (ST-A, B, C, D, E, large disc sensilla (LDS and large volcano sensilla (LVS. We found a great variability in sensillar equipment both among and within lineages. However, few traits seem to be unique to specific cynipid tribes. Paraulacini are, for example, distinctive in having apical LVS; Pediaspidini are unique in having ≥3 rows of SP, each including 6-8 sensilla per flagellomere, and up to 7 SCo-A in a single flagellomere; Eschatocerini have by far the largest SCo-A. Overall, our data preliminarily suggest a tendency to decreased numbers of SP rows per flagellomere and increased relative size of SCo-A during cynipoid evolution. Furthermore, SCo-A size seems to be higher in species inducing galls in trees than in those inducing galls in herbs. On the other hand, ST seem to be more abundant on the antennae of herb-gallers than wood-gallers. The antennal morphology and sensillar equipment in Cynipoidea are the complex results of different interacting pressures that need further investigations to be clarified.

Insect-induced effects on plants and possible effectors used by galling and leaf-mining insects to manipulate their host-plant.

Science.gov (United States)

Giron, David; Huguet, Elisabeth; Stone, Graham N; Body, Mélanie

2016-01-01

Gall-inducing insects are iconic examples in the manipulation and reprogramming of plant development, inducing spectacular morphological and physiological changes of host-plant tissues within which the insect feeds and grows. Despite decades of research, effectors involved in gall induction and basic mechanisms of gall formation remain unknown. Recent research suggests that some aspects of the plant manipulation shown by gall-inducers may be shared with other insect herbivorous life histories. Here, we illustrate similarities and contrasts by reviewing current knowledge of metabolic and morphological effects induced on plants by gall-inducing and leaf-mining insects, and ask whether leaf-miners can also be considered to be plant reprogrammers. We review key plant functions targeted by various plant reprogrammers, including plant-manipulating insects and nematodes, and functionally characterize insect herbivore-derived effectors to provide a broader understanding of possible mechanisms used in host-plant manipulation. Consequences of plant reprogramming in terms of ecology, coevolution and diversification of plant-manipulating insects are also discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Fracture-resistant monolithic dental crowns.

Science.gov (United States)

Zhang, Yu; Mai, Zhisong; Barani, Amir; Bush, Mark; Lawn, Brian

2016-03-01

To quantify the splitting resistance of monolithic zirconia, lithium disilicate and nanoparticle-composite dental crowns. Fracture experiments were conducted on anatomically-correct monolithic crown structures cemented to standard dental composite dies, by axial loading of a hard sphere placed between the cusps. The structures were observed in situ during fracture testing, and critical loads to split the structures were measured. Extended finite element modeling (XFEM), with provision for step-by-step extension of embedded cracks, was employed to simulate full failure evolution. Experimental measurements and XFEM predictions were self-consistent within data scatter. In conjunction with a fracture mechanics equation for critical splitting load, the data were used to predict load-sustaining capacity for crowns on actual dentin substrates and for loading with a sphere of different size. Stages of crack propagation within the crown and support substrate were quantified. Zirconia crowns showed the highest fracture loads, lithium disilicate intermediate, and dental nanocomposite lowest. Dental nanocomposite crowns have comparable fracture resistance to natural enamel. The results confirm that monolithic crowns are able to sustain high bite forces. The analysis indicates what material and geometrical properties are important in optimizing crown performance and longevity. Copyright © 2015 Academy of Dental Materials. All rights reserved.

The mono - and sesquiterpene content of aphid-induced galls on Pistacia palaestina is not a simple reflection of their composition in intact leaves.

Science.gov (United States)

Rand, Karin; Bar, Einat; Ben-Ari, Matan; Lewinsohn, Efraim; Inbar, Moshe

2014-06-01

Pistacia palaestina Boiss. (Anacardiaceae), a sibling species of P. terebinthus also known as turpentine tree or terebinth tree, is common in the Levant region. The aphid Baizongia pistaciae L. manipulates the leaves of the plant to form large galls, which provide both food and protection for its developing offspring. We analyzed the levels and composition of mono-and sesquiterpenes in both leaves and galls of ten naturally growing trees. Our results show that monoterpene hydrocarbons are the main constituents of P. palaestina leaves and galls, but terpene levels and composition vary among trees. Despite this inter-tree variation, terpene levels and compositions in galls from different trees resemble each other more than the patterns displayed by leaves from the same trees. Generally, galls contain 10 to 60 fold higher total terpene amounts than leaves, especially of the monoterpenes α-pinene and limonene. Conversely, the leaves generally accumulate more sesquiterpenes, in particular E-caryophyllene, germacrene D and δ-cadinene, in comparison to galls. Our results clearly show that the terpene pattern in the galls is not a simple reflection of that of the leaves and suggest that aphids have a strong impact on the metabolism of their host plant, possibly for their own defense.

Franz Joseph Gall and music: The faculty and the bump

NARCIS (Netherlands)

Eling, P.A.T.M.; Finger, S.; Whitaker, H.A.

2015-01-01

The traditional story maintains that Franz Joseph Gall's (1758-1828) scientific program began with his observations of schoolmates with bulging eyes and good verbal memories. But his search to understand human nature, in particular individual differences in capacities, passions, and tendencies, can

First report of Fusarium redolens causing crown rot of wheat (Triticum spp.) in Turkey

Science.gov (United States)

Fusarium crown rot, caused by a complex of Fusarium spp., is a yield-limiting disease of wheat world-wide, especially in dry Mediterranean climates. In order to identify Fusarium species associated with crown rot of wheat, a survey was conducted in summer 2013 in the major wheat growing regions of T...

Mechanisms Driving Galling Success in a Fragmented Landscape: Synergy of Habitat and Top-Down Factors along Temperate Forest Edges.

Directory of Open Access Journals (Sweden)

Nina-S Kelch

Full Text Available Edge effects play key roles in the anthropogenic transformation of forested ecosystems and their biota, and are therefore a prime field of contemporary fragmentation research. We present the first empirical study to address edge effects on the population level of a widespread galling herbivore in a temperate deciduous forest. By analyzing edge effects on abundance and trophic interactions of beech gall midge (Mikiola fagi Htg., we found 30% higher gall abundance in the edge habitat as well as lower mortality rates due to decreased top-down control, especially by parasitoids. Two GLM models with similar explanatory power (58% identified habitat specific traits (such as canopy closure and altitude and parasitism as the best predictors of gall abundance. Further analyses revealed a crucial influence of light exposure (46% on top-down control by the parasitoid complex. Guided by a conceptual framework synthesizing the key factors driving gall density, we conclude that forest edge proliferation of M. fagi is due to a complex interplay of abiotic changes and trophic control mechanisms. Most prominently, it is caused by the microclimatic regime in forest edges, acting alone or in synergistic concert with top-down pressure by parasitoids. Contrary to the prevailing notion that specialists are edge-sensitive, this turns M. fagi into a winner species in fragmented temperate beech forests. In view of the increasing proportion of edge habitats and the documented benefits from edge microclimate, we call for investigations exploring the pest status of this galling insect and the modulators of its biological control.

Effects of environmental parameters on the chestnut gall wasp and its complex of indigenous parasitoids

Science.gov (United States)

Bonsignore, Carmelo Peter; Bernardo, Umberto

2018-04-01

The chestnut gall wasp (CGW), Dryocosmus kuriphilus, an invasive pest native to China, has caused severe yield and economic losses to chestnut production in Europe since its arrival in 2002. In Southern Italy, the complex of indigenous parasitoids colonizing CGW was monitored between 2013 and 2015, with the aim of estimating the composition of the indigenous parasitoid complex, its ability to control CGW populations, and the interactions of both factors with several measured environmental parameters. We compared results among three differently managed field types. Results showed an increase in the rate of parasitism both when the host population density was lower and in unmanaged chestnut stands with more natural conditions. The percentage of parasitism in galls was related to morphological traits of the galls and to higher seasonal temperatures, which reduced the parasitism intensity because CGW develops earlier under such conditions. The host-parasitoid mortality inside galls varied among sites and was associated mostly with rot fungi during wet spring and summer months. Parasitoid species richness was similar among the study sites, but the proportion of parasitoid species differed between orchards and unmanaged coppice stands. The timing of attack by parasitoids followed a species-specific successional sequence throughout the larva-to-adult life cycle of the CGW. These interactions should be considered in future research on trophic relationships and when modeling invasive scenarios for new pest species.

Are gall midge species (Diptera, Cecidomyiidae host-plant specialists? Espécies de moscas galhadoras (Diptera, Cecidomyiidae são especialistas em plantas hospedeiras?

Directory of Open Access Journals (Sweden)

Marco Antonio A. Carneiro

2009-01-01

Full Text Available Despite the speciose fauna of gall-inducing insects in the Neotropical region, little is known about their taxonomy. On the other hand, gall morphotypes associated with host species have been extensively used as a surrogate of the inducer species worldwide. This study reviewed the described gall midges and their galls to test the generalization on the use of gall morphotypes as surrogates of gall midge species in the Brazilian fauna. We compiled taxonomic and biological data for 196 gall midge species recorded on 128 host plant species. Ninety two percent of those species were monophagous, inducing galls on a single host plant species, whereas only 5.6% species were oligophagous, inducing galls on more than one congeneric host plant species. Only four species induced galls on more than one host plant genus. We conclude that gall morphotypes associated with information on the host plant species and attacked organs are reliable surrogates of the gall-inducing species.Apesar do elevado número de espécies da fauna de insetos indutores de galhas na região Neotropical, muito pouco espécies foram descritas. Por outro lado, o morfotipo da galha associado com a espécie da planta hospedeira é em todo o mundo amplamente utilizado como um indicador da espécie de inseto indutor. Este estudo revê as espécies de cecidommídeos descritos e suas galhas para verificar a generalização do uso da morfologia da galha como indicador da espécie de cecidomíideo na fauna brasileira. Nós compilamos dados biológicos e taxonômicos de 196 espécies de cecidomiídeos em 128 espécies de plantas no Brasil. Noventa e dois porcento destas espécies foram monófagas, induzindo galhas em uma única espécie de planta hospedeira, enquanto somente 5,6% das espécies foram oligófagas, induzindo galhas em mais de uma espécie de planta do mesmo gênero. Somente quatro espécies induzem galhas em espécies de plantas de gêneros diferentes. Nós concluímos que o morfo

Genome-Wide Association Mapping of Crown Rust Resistance in Oat Elite Germplasm.

Science.gov (United States)

Klos, Kathy Esvelt; Yimer, Belayneh A; Babiker, Ebrahiem M; Beattie, Aaron D; Bonman, J Michael; Carson, Martin L; Chong, James; Harrison, Stephen A; Ibrahim, Amir M H; Kolb, Frederic L; McCartney, Curt A; McMullen, Michael; Fetch, Jennifer Mitchell; Mohammadi, Mohsen; Murphy, J Paul; Tinker, Nicholas A

2017-07-01

Oat crown rust, caused by f. sp. , is a major constraint to oat ( L.) production in many parts of the world. In this first comprehensive multienvironment genome-wide association map of oat crown rust, we used 2972 single-nucleotide polymorphisms (SNPs) genotyped on 631 oat lines for association mapping of quantitative trait loci (QTL). Seedling reaction to crown rust in these lines was assessed as infection type (IT) with each of 10 crown rust isolates. Adult plant reaction was assessed in the field in a total of 10 location-years as percentage severity (SV) and as infection reaction (IR) in a 0-to-1 scale. Overall, 29 SNPs on 12 linkage groups were predictive of crown rust reaction in at least one experiment at a genome-wide level of statistical significance. The QTL identified here include those in regions previously shown to be linked with seedling resistance genes , , , , , and and also with adult-plant resistance and adaptation-related QTL. In addition, QTL on linkage groups Mrg03, Mrg08, and Mrg23 were identified in regions not previously associated with crown rust resistance. Evaluation of marker genotypes in a set of crown rust differential lines supported as the identity of . The SNPs with rare alleles associated with lower disease scores may be suitable for use in marker-assisted selection of oat lines for crown rust resistance. Copyright © 2017 Crop Science Society of America.

Evaluating the Antimicrobial Activity of Methonolic Extract of Rhus Succedanea Leaf Gall

Directory of Open Access Journals (Sweden)

Savitri Shrestha

2013-12-01

Full Text Available Introduction: The worldwide increased bacterial resistance to antibiotics and the undesirable side effects associated with constant use of synthetic drugs has prompted the search for novel antimicrobial agents, particularly those manufactured from plants. This study is designed to ascertain the antibacterial potential of Rhus succedanea leaf gall extracts on the growth of gram-positive and gram–negative bacteria. Methods: The methanolic and hexane extract of different concentrations (100, 250, and 500 μg/ml were prepared and their antibacterial efficacy was tested against clinical isolates of Escherichia coli, Salmonella typhi, Micrococcus luteus, and Staphylococcus aureus using agar well diffusion method and the size of inhibition zone was measured in millimeters. Results: The methanol and hexane extracts differed significantly in their antimicrobial activity with methanol extract showing a potent inhibitory activity in the range of 16±2 to 23±1, which was almost equal to the values of ciprofloxacin (25±3, used as a standard. Further, the methanol extract was mostly potent and effective in inhibiting the growth of gram-negative bacteria, namely, E. coli, when compared to gram –positive bacteria stains, which are responsible for antimicrobial activities. The phytochemical screening showed positive results for the presence of steroids, triterpenes, alkaloids, and carbohydrates. Conclusion: The potent antibacterial activity of Rhus succedanea leaf gall extracts indicates its useful therapeutic application against bacterial infection. Furthermore, this study indicates that the extract might be exploited as natural drug for the treatment of infectious diseases and could be useful in understanding the relations between traditional cures and current medications.

ultrasound mis-diagnosis of biliary sludge as a gall bladder

African Journals Online (AJOL)

drclement

SUMMARY. Background: Cholecystosonography is the Ultrasound examination of the gall bladder and ducts. It has the advantage of not using ionising radiation, but may be operator dependent. Thus misinterpretation of the images may sometimes occur especially in the untrained hands. Case Report: A 24 year old male.

Morphological abnormalities in gall-forming aphids in a radiation-contaminated area near Fukushima Daiichi: selective impact of fallout?

Science.gov (United States)

Akimoto, Shin-ichi

2014-01-01

To evaluate the impact of fallout from the Fukushima Daiichi Nuclear Power Plant accident on organisms, this study compared the morphology and viability of gall-forming aphids between the Fukushima population and control populations from noncontaminated areas. This study, in particular, focused on the morphology of first-instar gall formers derived from the first sexual reproduction after the accident. Of 164 first instars from Tetraneura sorini galls collected 32 km from Fukushima Daiichi in spring 2012, 13.2% exhibited morphological abnormalities, including four conspicuously malformed individuals (2.4%). In contrast, in seven control areas, first instars with abnormal morphology accounted for 0.0–5.1% (on average, 3.8%). The proportions of abnormalities and mortality were significantly higher in Fukushima than in the control areas. Similarly, of 134 first instars from T. nigriabdominalis galls, 5.9% exhibited morphological abnormalities, with one highly malformed individual. However, of 543 second-generation larvae produced in T. sorini galls, only 0.37% had abnormalities, suggesting that abnormalities found in the first generation were not inherited by the next generation. Although investigation is limited to one study site, this result suggests that radioactive contamination had deleterious effects on embryogenesis in eggs deposited on the bark surface, but a negligible influence on the second generation produced in closed galls. Furthermore, analysis of both species samples collected in spring 2013 indicated that the viability and healthiness of the aphids were significantly improved compared to those in the 2012 samples. Thus, the results of this study suggest the possibility that a reduced level of radiation and/or selection for radiation tolerance may have led to the improved viability and healthiness of the Fukushima population. PMID:24634721

Life inside a gall: closeness does not favour horizontal transmission of Rickettsia between a gall wasp and its parasitoid.

Science.gov (United States)

Gualtieri, Liberata; Nugnes, Francesco; Nappo, Anna G; Gebiola, Marco; Bernardo, Umberto

2017-07-01

The incidence of horizontal transmission as a route for spreading symbiont infections is still being debated, but a common view is that horizontal transfers require intimate between-species relationships. Here we study a system that meets ideal requirements for horizontal transmission: the gall wasp Leptocybe invasa and its parasitoid Quadrastichus mendeli (Hymenoptera: Eulophidae). These wasps belong to the same subfamily, spend most of their lives inside the same minute gall and are both infected by Rickettsia, a maternally inherited endosymbiotic bacteria that infects several arthropods, sometimes manipulating their reproduction, like inducing thelytokous parthenogenesis in L. invasa. Despite intimate contact, close phylogenetic relationship and the parasitoid's host specificity, we show that host and parasitoid do not share the same Rickettsia. We provide indirect evidence that Rickettsia infecting Q. mendeli may be inducing thelytokous parthenogenesis, as the symbiont is densely present in the reproductive apparatus and is vertically transmitted. Phylogenetic analyses based on 16S and gltA placed this symbiont in the leech group. The confirmed and presumed parthenogenesis-inducing Rickettsia discovered so far only infect eulophid wasps, and belong to three different groups, suggesting multiple independent evolution of the parthenogenesis inducing phenotype. We also show some degree of cospeciation between Rickettsia and their eulophid hosts. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Variations in the Spatial Distribution of Gall Bladder Cancer: A Call ...

African Journals Online (AJOL)

adjusted incidence rates (AAR) of certain cancers in specific geographical regions within ... which is second to the highest (Chile) in the world and AAR of carcinoma gall bladder .... Conflict of Interest: None declared. 4. Asmarian NS, Ruzitalab ...

Overdenture dengan Pegangan Telescopic Crown

Directory of Open Access Journals (Sweden)

Pambudi Santoso

2014-06-01

Full Text Available Kaitan presisi merupakan alat retensi mekanis yang menghubungkan antara satu atau lebih pegangan gigi tiruan, yang bertujuan untuk menambah retensi dan/atau stabilisasi. Kaitan presisi dapat digunakan secara luas pada gigi tiruan cekat, gigi tiruan sebagian lepasan, overdenture, implant untuk retensi overdenture, dan protesa maksilo fasial. Overdenture dengan kaitan presisi dapat membantu dalam pembagian beban kunyah, meminimalkan trauma pada gigi pegangan dan jaringan lunak, meminimalkan resorbsi tulang, dan meningkatkan estetik dan pengucapan suara. Salah satu jenis dari kaitan presisi adalah telescopic crown, terdiri dari 2 macam mahkota, yaitu mahkota primer yang melekat secara permanen pada gigi penyangga, dan mahkota sekunder yang melekat pada gigi tiruan. Tujuan pemaparan kasus ini adalah untuk memberikan informasi tentang rehabilitasi pasien edentulous sebagian rahang atas dengan telescopic crown..  Pasien wanita berusia 45 tahun datang ke klinik prostodonsia RSGM Prof.Soedomo dengan keluhan ingin dibuatkan gigi tiruan. Pasien kehilangan gigi 11 12 15 16 17 21 22 24 25 26 dan 27 yang diindikasikan untuk pembuatan overdenture gigi tiruan sebagian lepasan (GTS kerangka logam dengan pegangan telescopic crown pada gigi 13 dan 14 dengan sistem parallel-sided crown. Tahap-tahap pembuatan telescopic crown yaitu mencetak model study dengan catatan gigit pendahuluan. Perawatan saluran dilakukan pada akar gigi 13, dilanjutkan pemasangan pasak fiber serta rewalling dinding bukal. Gigi 13 dan 14 dilakukan preparasi mahkota penuh, dilanjutkan dengan pencetakan model kerja untuk coping primer dan kerangka logam dengan metode double impression. Coping primer disementasi pada gigi penyangga, dilanjutkan pasang coba coping sekunder beserta kerangka logam. Selanjutnya dilakukan pencatatan gigit, pencetakan model kerja, penyusunan gigi dan pasang coba penyusunan gigi pada pasien. Prosedur dilanjutkan dengan proses di laboratorium, serta insersi pada

Solitary brain metastasis as an initial manifestation of gall bladder carcinoma

Directory of Open Access Journals (Sweden)

Kamlesh Kumar Harsh

2015-01-01

Full Text Available Gallbladder cancer is a common malignancy in Northern India, and it accounts for 2-4% of all malignant gastrointestinal tumors. It is an aggressive tumor with early dissemination to liver and lymph nodes and associated with poor prognosis. Systemic metastases from gall bladder carcinoma (Ca frequently occur; however, metastatic involvement of the central nervous system is rare and late manifestation and remains an ominous sign. Initial presentation of gall bladder Ca with brain metastasis is rare. We report a case of 65-year-old women who initially presented with a solitary brain metastasis from an adenocarcinoma of the gallbladder, which was diagnosed incidentally when the patient presented with headache, vomiting, and right temporal region swelling. Palliative chemotherapy and cranial radiotherapy were prescribed. She is symptom-free from 3 months after the completion of the treatment.

Male gender and sonographic gall bladder wall thickness: important predictable factors for empyema and gangrene in acute cholecystitis

International Nuclear Information System (INIS)

Khan, M.L.U.; Jawed, M.; Shaikh, U.; Abbassi, M.R.

2014-01-01

Objective: To underline the status of male gender and gall bladder wall thickness as significant risk factors for acute cholecystitis complications. Methods: The retrospective study, with purposive sampling of the patients of acute cholecystits in age above 18 years, who were operated within 10 days of onset of symptoms, was conducted at the Department of Surgery, Dow University Hospital, Karachi, by reviewing the patients' medical record from March 2010 to August 2012. Correlation of incidence of acute cholecystitis complications (empyema and gangrene) to male gender and to the sonographic gall bladder wall thickness more than 4.5mm was analysed using SPSS 16. Result: Out of 62 patients, 8 (13%) patients had gangrene while 10 (16.12%) had empyema. Overall, there were 21 (33.87%) males in the study. Ten (47.6%) of the male patients developed empyema or gangrene of the gall bladder as a complication of acute cholecystitis. Of the 41 (66.12%) female patients, only 8 (19.5%) developed these complications. There were 22 (35.48%) cases of gall bladders with sonographic wall thickness more than 4.5mm who were operated for acute cholecystitis. Of them, 16 (72.7%) had empyema or gangrene. Conclusion: Male gender and sonographic gall bladder wall thickness more than 4.5mm were statistically significant risk factors for suspicion of complicated acute cholecystitis (empyema/gangrene) and by using these risk factors, we can prioritise patients for surgery in the emergency room. (author)

An investigation of crown fuel bulk density effects on the dynamics of crown fire initiation in shrublands

Science.gov (United States)

Watcharapong Tachajapong; Jesse Lozano; Shankar Mahalingam; Xiangyang Zhou; David R. Weise

2008-01-01

Crown fire initiation is studied by using a simple experimental and detailed physical modeling based on Large Eddy Simulation (LES). Experiments conducted thus far reveal that crown fuel ignition via surface fire occurs when the crown base is within the continuous flame region and does not occur when the crown base is located in the hot plume gas region of the surface...

Ti plasmid-encoded genes responsible for catabolism of the crown gall opine mannopine by Agrobacterium tumefaciens are homologs of the T-region genes responsible for synthesis of this opine by the plant tumor.

Science.gov (United States)

Kim, K S; Farrand, S K

1996-06-01

Agrobacterium tumefaciens NT1 harboring pSaB4, which contains the 14-kb BamHI fragment 4 from the octopine/mannityl opine-type Ti plasmid pTi15955, grew well with agropine (AGR) but slowly with mannopine (MOP) as the sole carbon source. When a second plasmid encoding a dedicated transport system for MOP was introduced, these cells grew well with both AGR and MOP. Transposon insertion mutagenesis and subcloning identified a 5.7-kb region of BamHI fragment 4 that encodes functions required for the degradation of MOP. DNA sequence analysis revealed seven putative genes in this region: mocD (moc for mannityl opine catabolism) and mocE, oriented from right to left, and mocRCBAS, oriented from left to right. Significant identities exist at the nucleotide and derived amino acid sequence levels between these moc genes and the mas genes that are responsible for opine biosynthesis in crown gall tumors. MocD is a homolog of Mas2, the anabolic conjugase encoded by mas2'. MocE and MocC are related to the amino half and the carboxyl half, respectively, of Mas1 (MOP reductase), the second enzyme for MOP biosynthesis. These results indicate that the moc and mas genes evolved from a common origin. MocR and MocS are related to each other and to a putative repressor for the AGR degradation system encoded by the rhizogenic plasmid pRiA4. MocB and MocA are homologs of 6-phosphogluconate dehydratase and glucose-6-phosphate dehydrogenase, respectively. Mutations in mocD and mocE, but not mocC, are suppressed by functions encoded by the chromosome or the 450-kb megaplasmid present in many Agrobacterium isolates. We propose that moc genes derived from genes located elsewhere in the bacterial genome and that the tumor-expressed mas genes evolved from the bacterial moc genes.

Distribution of gall crabs inhabiting mushroom corals on Semporna reefs, Malaysia

NARCIS (Netherlands)

van der Meij, Sancia E. T.; Hoeksema, Bert W.

Coral reef cryptofauna forms an important component of tropical marine biodiversity, consisting primarily of invertebrates dwelling in and on corals. During a survey carried out around the Semporna peninsula (Sabah, NE Borneo), the occurrence of gall crabs inhabiting mushroom corals was examined on

[Comparison of the clinical effects of selective laser melting deposition basal crowns and cobalt chromium alloy base crowns].

Science.gov (United States)

Li, Jing-min; Wang, Wei-qian; Ma, Jing-yuan

2014-06-01

To evaluate the clinical effects of selective laser melting (SLM) deposition basal crowns and cobalt chromium alloy casting base crowns. One hundred and sixty eight patients treated with either SLM deposition basal crowns (110 teeth) or cobalt chromium alloy casting basal crowns (110 teeth) were followed-up for 1 month, 6 months, 12 months and 24 months. The revised standard of American Public Health Association was used to evaluate the clinical effect of restoration, including the color of porcelain crowns, gingival inflammation, gingival margin discoloration, and crack or fracture. Data analysis was conducted with SPSS 20 software package for Student's t test and Chi-square test. Six cases were lost to follow-up. The patients who were treated with SLM deposition basal crowns (104 teeth) and cobalt chromium alloy casting base crowns (101 teeth) completed the study. Patients were more satisfied with SLM deposition cobalt chromium alloy porcelain crowns. There was 1 prosthesis with poor marginal fit after 24 months of restoration in SLM crowns. There were 6 prostheses with edge coloring and 8 with poor marginal fit in cobalt chromium alloy casting base crowns, which was significantly different between the 2 groups(P<0.05). The SLM deposition copings results in smaller edge coloring and better marginal fit than those of cobalt-chrome copings. Patients are pleased with short-term clinical results.

Agricultural Crown Land in Saskatchewan

International Nuclear Information System (INIS)

Pyle, W.E.

1998-01-01

The petroleum industry's interest in provincial crown land in the agricultural area of Saskatchewan has grown over the last two decades. Agricultural land is regulated by the Saskatchewan Department of Agriculture and Food, Lands Branch. Since 1974 surface lease contracts by oil and gas companies have increased from 1,400 to the present 3,700. Resource lands are regulated by Saskatchewan Environment and Resource Management. There are 8.8 million acres of crown agricultural land in Saskatchewan, most of which is held without title. Crown land management is meant to provide a long term management approach to crown lands that balances economic, environmental and social benefits for present and future generations. The oil and gas industry is an important participant in crown land management. Revenues from petroleum and gas surface leasing, and seismic licensing totals more than five million dollars annually. In 1995/96, there were 54 companies establishing new oil and gas leases on crown land in Saskatchewan. This paper provides details of current policies which apply to petroleum and gas leasing and seismic exploration, and environmental guidelines for companies developing well sites, compressor and metering stations, access roads and easements. 3 tabs

Evaluation of marginal fit of 2 CAD-CAM anatomic contour zirconia crown systems and lithium disilicate glass-ceramic crown.

Science.gov (United States)

Ji, Min-Kyung; Park, Ji-Hee; Park, Sang-Won; Yun, Kwi-Dug; Oh, Gye-Jeong; Lim, Hyun-Pil

2015-08-01

This study was to evaluate the marginal fit of two CAD-CAM anatomic contour zirconia crown systems compared to lithium disilicate glass-ceramic crowns. Shoulder and deep chamfer margin were formed on each acrylic resin tooth model of a maxillary first premolar. Two CAD-CAM systems (Prettau®Zirconia and ZENOSTAR®ZR translucent) and lithium disilicate glass ceramic (IPS e.max®press) crowns were made (n=16). Each crown was bonded to stone dies with resin cement (Rely X Unicem). Marginal gap and absolute marginal discrepancy of crowns were measured using a light microscope equipped with a digital camera (Leica DFC295) magnified by a factor of 100. Two-way analysis of variance (ANOVA) and post-hoc Tukey's HSD test were conducted to analyze the significance of crown marginal fit regarding the finish line configuration and the fabrication system. The mean marginal gap of lithium disilicate glass ceramic crowns (IPS e.max®press) was significantly lower than that of the CAD-CAM anatomic contour zirconia crown system (Prettau®Zirconia) (Pmarginal discrepancy (Pmarginal gap than the CAD-CAM anatomic contour zirconia crown system (Prettau®Zirconia). In terms of absolute marginal discrepancy, the CAD-CAM anatomic contour zirconia crown system (ZENOSTAR®ZR translucent) had under-extended margin, whereas the CAD-CAM anatomic contour zirconia crown system (Prettau®Zirconia) and lithium disilicate glass ceramic crowns (IPS e.max®press) had overextended margins.

Occurrence and gall characterization in a fragment of Seasonal Semideciduous Forest in Telêmaco Borba, Paraná, Brazil

Directory of Open Access Journals (Sweden)

Patrícia de Oliveira Santos

2015-12-01

Full Text Available Galls surveys in Paraná are scarce and most sampling efforts in Brazil have still been concentrated on Cerrado regions. In this context, the present study investigated an area of semideciduous forest of Fazenda Monte Alegre in Telêmaco Borba, in order to contribute to the knowledge of galls in the state. Samples were collected on a 300m long track and 5m width, through active search up to two meters high. Fourty-one morphotypes were found, thirteen of which were identified to the host plant species level, ten according to level of genus, ten to family level and eight morphotypes were not identified. Among the identified families, Solanaceae, Asteraceae, Euphorbiaceae, Bignoniaceae, Melastomataceae and Leguminosae-Fabaceae represented the greatest quantity of morphotypes. Most of them occurred on the leaf (39%, 98.6% are entomogenous. 70.7% are glabrous, and as for the shape, most of them were classified as globular (43.9%. As for the way galls grouping on host plants, 46.3% showed up in isolation, and 53.7% in groupings. This study has contributed to enrich the knowledge on galls in the state of Paraná and for the Atlantic Forest Biome.

Size, age and composition: characteristics of plant taxa as diversity predictors of gall-midges (Diptera: Cecidomyiidae

Directory of Open Access Journals (Sweden)

Walter S Araújo

2011-12-01

Full Text Available Many hypotheses have been proposed to explain the diversity of gall-midge insects (Diptera: Cecidomyiidae, some of them taking into account plant diversity. This study aims to test the importance of size, age and composition of host plant taxa in the diversity of Cecidomyiidae. For this we used inventories data on the diversity of galling and host plants in Brazil. We found that Asterales, Myrtales and Malpighiales, were the most important orders, with 34, 33 and 25, gall morphotypes, respectively. The most representative host families were Asteraceae (34 morphotypes, Myrtaceae (23 and Fabaceae (22. In general, the order size and the plant family were good predictors of the galling diversity, but not the taxon age. The most diverse host genera for gall-midges were Mikania, Eugenia and Styrax, with 15, 13 and nine galler species, respectively. The size of plant genera showed no significant relationship with the richness of Cecidomyiidae, contrary to the prediction of the plant taxon size hypothesis. The plant genera with the greatest diversity of galling insects are not necessarily those with the greatest number of species. These results indicate that some plant taxa have a high intrinsic richness of galling insects, suggesting that the plant species composition may be equally or more important for the diversity of gall-midges than the size or age of the host taxon. Rev. Biol. Trop. 59 (4: 1599- 1607. Epub 2011 December 01.Muchas hipótesis se han propuesto para explicar la diversidad de dipteros de la familia Cecidomyiidae, algunos de ellos teniendo en cuenta la diversidad de las plantas. Este estudio tiene como objetivo probar la importancia del tamaño, la edad y la composición de las plantas en la diversidad de Cecidomyiidae, a través de los inventarios de las agallas y las plantas hospederas, en Brasil. Asterales, Malpighiales y Myrtales fueron los órdenes más importantes, con 34, 33 y 25 tipos de agallas, respectivamente. Las familias m

The cause, incidence and severity of a new gall damage on ...

African Journals Online (AJOL)

develop Integrated Pest Management (IPM) strategies against the new Eucalyptus pest. Key words: Alien insects, Galls. Leptocybe invasa, pest management, tree plantation. Introduction. Tree growing is important to many ... refugee settlements in Uganda to protect the environment while ensuring sustainable supply of tree ...

Testing Optimal Foraging Theory Using Bird Predation on Goldenrod Galls

Science.gov (United States)

Yahnke, Christopher J.

2006-01-01

All animals must make choices regarding what foods to eat, where to eat, and how much time to spend feeding. Optimal foraging theory explains these behaviors in terms of costs and benefits. This laboratory exercise focuses on optimal foraging theory by investigating the winter feeding behavior of birds on the goldenrod gall fly by comparing…

Yeast transformation mediated by Agrobacterium strains harboring an Ri plasmid: comparative study between GALLS of an Ri plasmid and virE of a Ti plasmid.

Science.gov (United States)

Kiyokawa, Kazuya; Yamamoto, Shinji; Sato, Yukari; Momota, Naoto; Tanaka, Katsuyuki; Moriguchi, Kazuki; Suzuki, Katsunori

2012-07-01

Agrobacterium strains containing a Ti plasmid can transfer T-DNA not only to plants but also to fungi, including the yeast Saccharomyces cerevisiae. However, no Agrobacterium strain harboring an Ri plasmid has been evaluated in fungal transformation. Some Ri plasmids have GALLS , instead of virE1 and virE2. GALLS protein can functionally substitute in plant transformation for a structurally different protein VirE2. In this study, we compared the yeast transformation ability among Agrobacterium donors: a strain containing a Ti plasmid, strains harboring either an agropine-type or a mikimopine-type Ri plasmid, and a strain having a modified Ri plasmid supplemented with a Ti plasmid type virE operon. Agrobacterium strains possessing GALLS transformed yeast cells far less efficiently than the strain containing virE operon. Production of GALLS in recipient yeast cells improved the yeast transformation mediated by an Agrobacterium strain lacking neither GALLS nor virE operon. A reporter assay to detect mobilization of the proteins fused with Cre recombinase revealed that VirE2 protein is much more abundant in yeast cells than GALLS. Based on these results, we concluded that the low yeast transformability mediated by Agrobacterium strains having the Ri plasmid is because of low amount of mobilized GALLS in yeast cells. © 2012 The Authors Journal compilation © 2012 by the Molecular Biology Society of Japan/Blackwell Publishing Ltd.

Urban Crowns: crown analysis software to assist in quantifying urban tree benefits

Science.gov (United States)

Matthew F. Winn; Sang-Mook Lee Bradley; Philip A. Araman

2010-01-01

UrbanCrowns is a Microsoft® Windows®-based computer program developed by the U.S. Forest Service Southern Research Station. The software assists urban forestry professionals, arborists, and community volunteers in assessing and monitoring the crown characteristics of urban trees (both deciduous and coniferous) using a single side-view digital photograph. Program output...

Gall mite inspection on dormant black currant buds using machine vision

DEFF Research Database (Denmark)

Nielsen, M. R.; Stigaard Laursen, Morten; Jonassen, M. S.

2013-01-01

This paper presents a novel machine vision-based approach detecting and mapping gall mite infection in dormant buds on black currant bushes. A vehicle was fitted with four cameras and RTK-GPS. Results compared automatic detection to human decisions based on the images, and by mapping the results...

PEEK Primary Crowns with Cobalt-Chromium, Zirconia and Galvanic Secondary Crowns with Different Tapers—A Comparison of Retention Forces

Directory of Open Access Journals (Sweden)

Veronika Stock

2016-03-01

Full Text Available In prosthetic dentistry, double crown systems have proved their suitability as retainers for removable partial dentures. However, investigations in this context, regarding polyetheretherketone, are scarce. Therefore, the aim of this study was to test the retention force (RF between polyetheretherketone (PEEK primary and cobalt-chromium (CoCr, zirconia (ZrO2 and galvanic (GAL secondary crowns with three different tapers. Primary PEEK-crowns were milled with the tapers 0°, 1°, and 2° (n = 10/taper, respectively. Afterwards, 90 secondary crowns were fabricated: (i 30 CoCr-crowns milled from Ceramill Sintron (AmannGirrbach, Koblach, Austria (n = 10/taper, (ii 30 ZrO2-crowns milled from Ceramill ZI (AmannGirrbach, Koblach, Austria (n = 10/taper, and (iii 30 GAL-crowns made using electroforming (n = 10/taper. RF was measured in a pull-off test (20 pull-offs/specimen and data were analyzed using 2-/1-way Analysis of Variance (ANOVA followed by the Tukey-Honestly Significant Difference (HSD post hoc test and linear regression analyses (p < 0.05. The measured mean RF values ranged between 9.6 and 38.2 N. With regard to the 0°, 1°, and 2° tapered crowns, no statistically significant differences between CoCr and ZrO2 were observed (p > 0.141. At 0° taper, no differences in retention forces between GAL, CrCr, and ZrO2 crowns were found (p = 0.075. However, at 1° and 2° taper, lower RF for GAL-crowns were observed (p < 0.009, p < 0.001, respectively. According to this laboratory study, PEEK might be a suitable material for primary crowns, regardless of the taper and the material of secondary crown. Long-term results, however, are still necessary.

All-ceramic crowns: bonding or cementing?

Science.gov (United States)

Pospiech, Peter

2002-12-01

Despite the wide variety of all-ceramic systems available today, the majority of dental practitioners hesitate to recommend and insert all-ceramic crowns. This article regards the nature of the ceramic materials, the principles of bonding and adhesion, and the clinical problems of the acid-etch technique for crowns. Advantages and disadvantages are discussed, and the influences of different factors on the strength of all-ceramic crowns are presented. Finally, the conclusion is drawn that conventional cementing of all-ceramic crowns is possible when the specific properties of the ceramics are taken into consideration.

Expression of the β-1,3-glucanase gene bgn13.1 from Trichoderma harzianum in strawberry increases tolerance to crown rot diseases but interferes with plant growth.

Science.gov (United States)

Mercado, José A; Barceló, Marta; Pliego, Clara; Rey, Manuel; Caballero, José L; Muñoz-Blanco, Juan; Ruano-Rosa, David; López-Herrera, Carlos; de Los Santos, Berta; Romero-Muñoz, Fernando; Pliego-Alfaro, Fernando

2015-12-01

The expression of antifungal genes from Trichoderma harzianum, mainly chitinases, has been used to confer plant resistance to fungal diseases. However, the biotechnological potential of glucanase genes from Trichoderma has been scarcely assessed. In this research, transgenic strawberry plants expressing the β-1,3-glucanase gene bgn13.1 from T. harzianum, under the control of the CaMV35S promoter, have been generated. After acclimatization, five out of 12 independent lines analysed showed a stunted phenotype when growing in the greenhouse. Moreover, most of the lines displayed a reduced yield due to both a reduction in the number of fruit per plant and a lower fruit size. Several transgenic lines showing higher glucanase activity in leaves than control plants were selected for pathogenicity tests. When inoculated with Colletotrichum acutatum, one of the most important strawberry pathogens, transgenic lines showed lower anthracnose symptoms in leaf and crown than control. In the three lines selected, the percentage of plants showing anthracnose symptoms in crown decreased from 61 % to a mean value of 16.5 %, in control and transgenic lines, respectively. Some transgenic lines also showed an enhanced resistance to Rosellinia necatrix, a soil-borne pathogen causing root and crown rot in strawberry. These results indicate that bgn13.1 from T. harzianum can be used to increase strawberry tolerance to crown rot diseases, although its constitutive expression affects plant growth and fruit yield. Alternative strategies such as the use of tissue specific promoters might avoid the negative effects of bgn13.1 expression in plant performance.

77 FR 21813 - Changes to the Generic Aging Lessons Learned (GALL) Report Revision 2 AMP XI.M41, “Buried and...

Science.gov (United States)

2012-04-11

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0055] Changes to the Generic Aging Lessons Learned (GALL) Report Revision 2 AMP XI.M41, ``Buried and Underground Piping and Tanks'' AGENCY: Nuclear Regulatory... Guidance (LR-ISG), LR-ISG-2011-03, ``Changes to GALL Report Revision 2 Aging Management Program (AMP) XI...

Identification of Juglans wild relatives resistant to crown gall caused by Agrobacterium tumefaciens

Science.gov (United States)

Wild species are a source of useful agronomic traits for crop plants including but not limited to pathogen resistance, drought tolerance, and salt tolerance (Aradhya and Kluepfel 2012). To exploit this natural diversity of disease resistance, we are conducting the first systematic exploration of th...

Digital photo monitoring for tree crown

Science.gov (United States)

Neil Clark; Sang-Mook Lee

2007-01-01

Assessing change in the amount of foliage within a tree’s crown is the goal of crown transparency estimation, a component in many forest health assessment programs. Many sources of variability limit analysis and interpretation of crown condition data. Increased precision is needed to detect more subtle changes that are important for detection of health problems....

Dentin-bonded all-ceramic crowns: current status.

Science.gov (United States)

Burke, F J; Qualtrough, A J; Hale, R W

1998-04-01

Dentin-bonded all-ceramic crowns employ contemporary techniques to lute the crown to the tooth using a resin luting material and dentin-bonding system. The advantages of these crowns are that they provide good esthetics and fracture resistance and can be used in cases of substantial tooth loss. Their principal disadvantages are that the luting procedure is more time-consuming and that these crowns should not be used where margins are subgingival. Dentin-bonded all-ceramic crowns may be a useful addition to the dentist's armamentarium, but long-term clinical studies are needed to fully assess their performance.

Pericoronal radiolucency associated with incomplete crown

Energy Technology Data Exchange (ETDEWEB)

Nah, Kyung Soo [Dept. of Oral and Maxillofacial Radiology, School of Dentistry, Pusan National University, Yangsan (Korea, Republic of)

2013-12-15

The author experienced 8 cases of pericoronal radiolucency involving an incomplete tooth crown that had not developed to form the cemento-enamel junction, and the underdeveloped crown sometimes appeared to be floating within the radiolucency radiographically. The first impression was that these cystic lesions had odontogenic keratocysts, but half of them turned out to be dentigerous cysts histopathologically. There has been no report concerning odontogenic cysts involving an incompletely developed crown. The purpose of this paper is to report that dentigerous cysts may develop before the completion of the cemento-enamel junction of a developing crown.

Pericoronal radiolucency associated with incomplete crown

International Nuclear Information System (INIS)

Nah, Kyung Soo

2013-01-01

The author experienced 8 cases of pericoronal radiolucency involving an incomplete tooth crown that had not developed to form the cemento-enamel junction, and the underdeveloped crown sometimes appeared to be floating within the radiolucency radiographically. The first impression was that these cystic lesions had odontogenic keratocysts, but half of them turned out to be dentigerous cysts histopathologically. There has been no report concerning odontogenic cysts involving an incompletely developed crown. The purpose of this paper is to report that dentigerous cysts may develop before the completion of the cemento-enamel junction of a developing crown.

Extraction separation of lithium isotopes with crown-ethers

International Nuclear Information System (INIS)

Tsivadze, A.Yu.; Demin, S.V.; Levkin, A.V.; Zhilov, V.I.; Nikol'skij, S.F.; Knyazev, D.A.

1990-01-01

By the method of extraction chromatography lithium isotope separation coefficients are measured during chemical isotope exchange between lithium aquocomplex and its complex in chloroform with crown-ethers: benzo-15-crown-5, 15crown-5, dicyclohexano-18-crown-6 and dibenzo-18-crown-6. Lithium perchlorate and trichloroacetate are the salts extracted. Values of 6 Li/ 7 Li isotope separation are 1.0032-1.020

The investigation of preparations diluent cholestrol stones of gall-bladder and bile-ducts

International Nuclear Information System (INIS)

Kadirov, A.Kh.; Khaydarov, K.Kh.; Giyosov, A.Sh.

2000-01-01

In this chapter of book authors made conclusion that developed synthesis methods can be used at receiving new bile acids derivatives and they can find use as medical products in particular as preparations diluent gall-cholesteric stones

Larvae and Nests of Aculeate Hymenoptera (Hymenoptera: Aculeata) Nesting in Reed Galls Induced by Lipara spp. (Diptera: Chloropidae) with a Review of Species Recorded. Part II.

Science.gov (United States)

Astapenková, Alena; Heneberg, Petr; Bogusch, Petr

2017-01-01

The ability of aculeate Hymenoptera to utilize wetlands is poorly understood, and descriptions of their nests and developmental stages are largely absent. Here we present results based on our survey of hymenopterans using galls induced by Lipara spp. flies on common reed Phragmites australis in the years 2015-2016. We studied 20,704 galls, of which 9,446 were longitudinally cut and the brood from them reared in the laboratory, while the remaining 11,258 galls reared in rearing bags also in laboratory conditions. We recorded eight species that were previously not known to nest in reed galls: cuckoo wasps Chrysis rutilans and Trichrysis pumilionis, solitary wasps Stenodynerus chevrieranus and Stenodynerus clypeopictus, and bees Pseudoanthidium tenellum, Stelis punctulatissima, Hylaeus communis and Hylaeus confusus. Forty five species of Hymenoptera: Aculeata are known to be associated with reed galls, of which 36 make their nests there, and the other are six parasitoids of the family Chrysididae and three cuckoo bees of the genus Stelis. Of these species, Pemphredon fabricii and in southern Europe also Heriades rubicola are very common in reed galls, followed by Hylaeus pectoralis and two species of the genus Trypoxylon. We also found new host-parasite associations: Chrysis angustula in nests of Pemphredon fabricii, Chrysis rutilans in nests of Stenodynerus clypeopictus, Trichrysis pumilionis in nests of Trypoxylon deceptorium, and Stelis breviuscula in nests of Heriades rubicola. We provide new descriptions of the nests of seven species nesting in reed galls and morphology of mature larvae of eight species nesting in reed galls and two parasitoids and one nest cleptoparasite. The larvae are usually very similar to those of related species but possess characteristics that make them easy to distinguish from related species. Our results show that common reeds are not only expansive and harmful, but very important for many insect species associated with habitats

Preformed crowns for decayed primary molar teeth.

Science.gov (United States)

Innes, Nicola P T; Ricketts, David; Chong, Lee Yee; Keightley, Alexander J; Lamont, Thomas; Santamaria, Ruth M

2015-12-31

Crowns for primary molars are preformed and come in a variety of sizes and materials to be placed over decayed or developmentally defective teeth. They can be made completely of stainless steel (know as 'preformed metal crowns' or PMCs), or to give better aesthetics, may be made of stainless steel with a white veneer cover or made wholly of a white ceramic material. In most cases, teeth are trimmed for the crowns to be fitted conventionally using a local anaesthetic. However, in the case of the Hall Technique, PMCs are pushed over the tooth with no local anaesthetic, carious tissue removal or tooth preparation. Crowns are recommended for restoring primary molar teeth that have had a pulp treatment, are very decayed or are badly broken down. However, few dental practitioners use them in clinical practice. This review updates the original review published in 2007. Primary objectiveTo evaluate the clinical effectiveness and safety of all types of preformed crowns for restoring primary teeth compared with conventional filling materials (such as amalgam, composite, glass ionomer, resin modified glass ionomer and compomers), other types of crowns or methods of crown placement, non-restorative caries treatment or no treatment. Secondary objectiveTo explore whether the extent of decay has an effect on the clinical outcome of primary teeth restored with all types of preformed crowns compared with those restored with conventional filling materials. We searched the following electronic databases: Cochrane Oral Health Group Trials Register (to 21 January 2015), Cochrane Central Register of Controlled Trials (CENTRAL; The Cochrane Library, 2014, Issue 12), MEDLINE via Ovid (1946 to 21 January 2015) and EMBASE via Ovid (1980 to 21 January 2015). We searched the US National Institutes of Health Trials Register (http://clinicaltrials.gov) and the World Health Organization (WHO) International Clinical Trials Registry Platform for ongoing trials and Open Grey for grey literature (to

Ellagitannins, gallotannins, and gallo-ellagitannins from the galls of Tamarix aphylla.

Science.gov (United States)

Orabi, Mohamed A A; Yoshimura, Morio; Amakura, Yoshiaki; Hatano, Tsutomu

2015-07-01

Chromatographic separation of an aqueous acetone extract of the galls from Tamarix aphylla using gels resulted in isolation of an ellagitannin, phyllagallin M1 (13), a gallo-ellagitannin, phyllagallin D1 (14), and four gallotannins, phyllagallin M2 (15) and phyllagallins D2-D4 (16-18), in addition to four known ellagitannins and three phenolics of lower molecular weight structurally related to hydrolyzable tannins. The structures of the six new tannins were elucidated based on spectroscopic and chemical data. Among the phenolics, flavogallonic acid dilactone (8), which is presumed to be biogenetically produced by C-C oxidative coupling of an ellagic acid unit with a galloyl residue, shows an exceptional oxidative pattern of gallic acid residues in plants of the family Tamaricaceae. Although the ellagitannin tamarixellagic acid (4) was reported to be a constituent of the galls of T. aphylla, such compounds with anomalous location of the DHDG moiety at O-3 on the glucopyranose core have not been observed among the tannins of tamaricaceous plants. Copyright © 2015 Elsevier B.V. All rights reserved.

BAY K 8644-induced oscillations in rabbit gall-bladder transepithelial potential difference

DEFF Research Database (Denmark)

Hansen, C P; Holstein-Rathlou, N H; Frederiksen, O

1986-01-01

The effects of the Ca2+-channel activator BAY K 8644 (a novel dihydropyridine) on transepithelial potential difference (Pd), electrical resistance (Rt), and unidirectional Na+-fluxes were studied in the rabbit gall-bladder. It was observed that BAY K 8644 at concentrations between 10(-7) and 10...

COMPARSION EFFECTIVENES METHODS REPEIR CROWN TEETH IN DOGS

OpenAIRE

CHOOHNO V.S.

2008-01-01

Methods of dogs’ crown teeth restoration with using of anchor pin with light curable composite, glass fiber pin with light curable composite, stump crown with prosthetic crown were approved. Their effectiveness was compared. Greater reliability was shown by methods of stump crown with prosthetic crown, when using of which there was no that restoration damage in all cases, but there was no cosmetics effect. Restoration methods with using anchor pin with light curable composite and glass fiber ...

Testing the Role of Habitat Isolation among Ecologically Divergent Gall Wasp Populations

Directory of Open Access Journals (Sweden)

Scott P. Egan

2012-01-01

Full Text Available Habitat isolation occurs when habitat preferences lower the probability of mating between individuals associated with differing habitats. While a potential barrier to gene flow during ecological speciation, the effect of habitat isolation on reproductive isolation has rarely been directly tested. Herein, we first estimated habitat preference for each of six populations of the gall wasp Belonocnema treatae inhabiting either Quercus virginiana or Q. geminata. We then estimated the importance of habitat isolation in generating reproductive isolation between B. treatae populations that were host specific to either Q. virginiana or Q. geminata by measuring mate preference in the presence and absence of the respective host plants. All populations exhibited host preference for their native plant, and assortative mating increased significantly in the presence of the respective host plants. This host-plant-mediated assortative mating demonstrates that habitat isolation likely plays an important role in promoting reproductive isolation among populations of this host-specific gall former.

Migration Monitoring of Blackcurrant Gall Mite (Cecidophyopsis ribis Westw. from Buds to Leaves on Several Blackcurrant (Ribes nigrum L. Cultivars

Directory of Open Access Journals (Sweden)

Piotrowski Wojciech

2016-12-01

Full Text Available The blackcurrant gall mite (Cecidophyopsis ribis is the most important pest of blackcurrant crops. Over recent years withdrawal from plant protection programmes of chemical products (endosulfan and amitraz used for the control of this pest in Poland, has led to an observed increase in population numbers. In 2013, fenpiroxymate (Ortus 05 SC became registered for control of this pest. It is deemed best that chemical protection should be used during the migration period; when big gall mites emerge from buds in search of new buds. The studies were carried out in a plantation of blackcurrants during 2011-2013. The assessment of migration of the blackcurrant gall mite was carried out on the cultivars ‘Ben Hope’, ‘Ben Alde’r, ‘Ojeby’n and ‘Ruben’. Every year, from selected cultivars buds were collected. They were then placed on blackcurrant leaves within Petri dishes. After one, three and five days of placing buds on the leaves, the estimated number of eriophyid mites on the leaves was calculated. The data has shown a very useful method for monitoring blackcurrant gall mite, which can be used in calculating the treatment dates for this pest. Also, the data has shown that differences in the periods of migration of the mite are dependent on the cultivar and time of flowering. Among the cultivars observed the least susceptible to colonization by the blackcurrant gall mite was a Polish cultivar ‘Ruben’, while the most susceptible cultivar was ‘Ben Hope’.

Activity relationships for aromatic crown ethers

International Nuclear Information System (INIS)

Wilson, Mark James

1998-01-01

This thesis involves an investigation of aromatic crown ethers and a study of their binding constants for alkali metals. The study was motivated by the current needs of the semiconductor industry to improve the scavenging of mobile ions from fabricated circuits. A number of aromatic crown ethers have been sulphonated in an attempt to improve their water solubility and cation binding activity. These materials have been extensively studied and their binding activity determined. In collaboration with a molecular modelling study, the effect of ionisable sulphonate groups on the macrocycles' behaviour has been investigated. The broader issue of the effect of substituents in aromatic crown ethers has also been studied with the preparation of a wide range of substituted crown ethers. The cation binding activity of these materials has been found to bear a simple relationship to the electron withdrawing nature of the aromatic substituents. This relationship can be accurately monitored using electronic charge densities from molecular modelling and this rational has been applied to the study of proton ionisable and lariating crown ethers. The incorporation of crown ethers into polyamic acid and polyimide frameworks has also been investigated, where the resulting materials have been found to exhibit unusual cation binding and uptake properties. These results imply that the combination of the crown ethers' macrocycle and adjacent carboxylic acid residues, from the polyamic acids, are conducive to effective cationic binding. NMR measurements, in conjunction with molecular modelling, have been used to explore the geometry changes encountered as the crown ether goes from it's uncomplexed to its complexed state. The energy requirement for these geometry changes has subsequently been used to examine the cation selectivity of these materials. The electronic charge changes associated with the complexation have also been investigated and correlated with the theoretical results. (author)

ERGO Jazz Session võõrustab Chris Gall Triot. Vennad Urbid ajakohaste lauludega

Index Scriptorium Estoniae

2008-01-01

14. septembril alustab Jazzkaar koostöös ERGO Kindlustusega uut sarja ERGO Jazz Session, mille avaesinejaks on Chris Gall Trio (kontserdid 14. sept.Kumu auditooriumis ja 15. sept. Tartus Athena keskuses). Vendade Urbide kontserdist "Aeg" 13. sept. Vanemuise kontserdimajas

Suitability of Secondary PEEK Telescopic Crowns on Zirconia Primary Crowns: The Influence of Fabrication Method and Taper

Directory of Open Access Journals (Sweden)

Susanne Merk

2016-11-01

Full Text Available This study investigates the retention load (RL between ZrO2 primary crowns and secondary polyetheretherketone (PEEK crowns made by different fabrication methods with three different tapers. Standardized primary ZrO2 crowns were fabricated with three different tapers: 0°, 1°, and 2° (n = 10/group. Ten secondary crowns were fabricated (i milled from breCam BioHPP blanks (PM; (ii pressed from industrially fabricated PEEK pellets (PP (BioHPP Pellet; or (iii pressed from granular PEEK (PG (BioHPP Granulat. One calibrated operator adjusted all crowns. In total, the RL of 90 secondary crowns were measured in pull-off tests at 50 mm/min, and each specimen was tested 20 times. Two- and one-way ANOVAs followed by a Scheffé’s post-hoc test were used for data analysis (p < 0.05. Within crowns with a 0° taper, the PP group showed significantly higher retention load values compared with the other groups. Among the 1° taper, the PM group presented significantly lower retention loads than the PP group. However, the pressing type had no impact on the results. Within the 2° taper, the fabrication method had no influence on the RL. Within the PM group, the 2° taper showed significantly higher retention load compared with the 1° taper. The taper with 0° was in the same range value as the 1° and 2° tapers. No impact of the taper on the retention value was observed between the PP groups. Within the PG groups, the 0° taper presented significantly lower RL than the 1° taper, whereas the 2° taper showed no differences. The fabrication method of the secondary PEEK crowns and taper angles showed no consistent effect within all tested groups.

Suppression of crown and root rot of wheat by the rhizobacterium Paenibacillus polymyxa

Directory of Open Access Journals (Sweden)

Lamia LOUNACI

2017-01-01

Full Text Available A seedling bioassay was developed for screening a wheat root-associated rhizobacterial strain of Paenibacillus polymyxa for ability to suppress crown and root rot pathogens of wheat. The primary aim was to evaluate the ability of P. polymyxa to suppress Fusarium graminearum, F. culmorum, F. verticillioides and Microdochium nivale, the fungal pathogens responsible for Fusarium crown and root rot and head blight of wheat in Algeria. Bioassays conducted under controlled conditions indicated that seed treatments with P. polymyxa strain SGK2 significantly reduced disease symptoms caused by all four fungal pathogens. Plant growth promotion (increased shoot and root dry weights, however, depended on the pathogen tested. Our results indicate that seed treatments with a biocontrol agent could be an additional strategy for management of wheat crown and root rot pathogens.

Suitability of Secondary PEEK Telescopic Crowns on Zirconia Primary Crowns: The Influence of Fabrication Method and Taper.

Science.gov (United States)

Merk, Susanne; Wagner, Christina; Stock, Veronika; Eichberger, Marlis; Schmidlin, Patrick R; Roos, Malgorzata; Stawarczyk, Bogna

2016-11-08

This study investigates the retention load (RL) between ZrO₂ primary crowns and secondary polyetheretherketone (PEEK) crowns made by different fabrication methods with three different tapers. Standardized primary ZrO₂ crowns were fabricated with three different tapers: 0°, 1°, and 2° ( n = 10/group). Ten secondary crowns were fabricated (i) milled from breCam BioHPP blanks (PM); (ii) pressed from industrially fabricated PEEK pellets (PP) (BioHPP Pellet); or (iii) pressed from granular PEEK (PG) (BioHPP Granulat). One calibrated operator adjusted all crowns. In total, the RL of 90 secondary crowns were measured in pull-off tests at 50 mm/min, and each specimen was tested 20 times. Two- and one-way ANOVAs followed by a Scheffé's post-hoc test were used for data analysis ( p impact on the results. Within the 2° taper, the fabrication method had no influence on the RL. Within the PM group, the 2° taper showed significantly higher retention load compared with the 1° taper. The taper with 0° was in the same range value as the 1° and 2° tapers. No impact of the taper on the retention value was observed between the PP groups. Within the PG groups, the 0° taper presented significantly lower RL than the 1° taper, whereas the 2° taper showed no differences. The fabrication method of the secondary PEEK crowns and taper angles showed no consistent effect within all tested groups.

The demonstration of gall stones by sonography and radiography

International Nuclear Information System (INIS)

Gladisch, R.; Deininger, H.K.; Staedtische Kliniken Darmstadt

1983-01-01

Eighty-seven unselected gall stones were examined radiologically and by ultrasound in vitro. No relationship of diagnostic value could be established between the amount of calcification and stone demonstration, the sonogram being influenced by the size of the stone, its surface contour and its position in the ultrasound beam. Sonography is therefore not suitable for selecting those patients on whom litholysis could be carried out. Sonography appears to be useful only in a negative way by establishing the exact size of the concretion. (orig.) [de

Standing intraoral extractions of cheek teeth aided by partial crown removal in 165 horses (2010-2016).

Science.gov (United States)

Rice, M K; Henry, T J

2018-01-01

Diseased cheek teeth in horses often require invasive extraction techniques that carry a high rate of complications. Techniques and instrumentation were developed to perform partial crown removal to aid standing intraoral extraction of diseased cheek teeth in horses. To analyse success rates and post-surgical complications in horses undergoing cheek teeth extraction assisted by partial crown removal. Retrospective cohort study. This study included 165 horses with 194 diseased cheek teeth that were extracted orally assisted by partial crown removal between 2010 and 2016. Medical records were analysed, including case details, obtained radiographs, surgical reports and follow-up information. Follow-up information (≥2 months) was obtained for 151 horses (91.5%). There were 95 horses examined post-operatively by the authors and, 16 horses by the referring veterinarian; in 40 horses, post-operative follow up was obtained by informal telephone interviews with the owner. Successful standing intraoral extraction of cheek teeth was obtained in 164/165 horses (99.4%). Twenty-five of these horses (15.2%) required additional intraoral extraction methods to complete the extraction, including minimally invasive transbuccal approach (n = 21) and tooth sectioning (n = 4). There was one (0.6%) horse with intraoral extraction failure that required standing repulsion to complete the extraction. The intraoperative complication of fractured root tips occurred in 11/165 horses (6.7%). Post-operative complications occurred in 6/165 horses (3.6%), including alveolar sequestra (n = 4), mild delay of alveolar healing at 2 months (n = 1), and development of a persistent draining tract secondary to a retained root tip (n = 1). Specialised instrumentation and additional training in the technique are recommended to perform partial crown removal in horses. Horses with cheek teeth extraction by partial crown removal have an excellent prognosis for a positive outcome. The term partial coronectomy

Evaluation of effectiveness of cement removal from implant-retained crowns using a proposed circular crisscross flossing technique.

Science.gov (United States)

Ferreira, Cimara Fortes; Shafter, Mohamed Amer; Jain, Vinay; Wicks, Russel Anthony; Linder, Erno; Ledo, Carlos Alberto da Silva

2018-02-13

Extruded cement during dental implant crown cementation may cause peri-implant diseases if not removed adequately. Evaluate the efficiency of removal of cement after cementation of implant crowns using an experimental "circular crisscross flossing technique (CCCFT) flossing technique, compared to the conventional "C" shape flossing technique (CSFT). Twenty-four patients rendered 29 experimental and 29 control crowns. Prefabricated abutments were secured to the implant with the margins at least 1 mm subgingivally. The abutments were scanned using CADCAM technology and Emax crowns were fabricated in duplicates. Each crown was cemented separately and excess cement was removed using the CSFT and the CCFT techniques. After completion of cementation was completed, the screw access holes were accessed and the crown was unscrewed along with the abutment. The samples were disinfected using 70% ethanol for 10 minutes. Crowns were divided into 4 parts using a marker in order to facilitate measurement data collection. Vertical and horizontal measurements were made for extruded cement for each control and experimental groups by means of a digital microscope. One-hundred and seventeen measurements were made for each group. Mann-Whitney test was applied to verify statistical significance between the groups. The CCFT showed a highly statistically significant result (104.8 ± 13.66, pcrowns cementation when compared with the CSFT.

Contrast media in gall bladder diagnostics

International Nuclear Information System (INIS)

Schindler, G.; Frommhold, W.

1982-01-01

The justification of conventional X-ray diagnostic of bile ducts is repeatedly questioned by newer examination techniques like sonography and ERC. The indication for oral cholesgraphy is derived from its high-specifity of its statements for gall bladder diagnostic, that is as high as with sonography and does not depend on the experience of the investigator. The importance of the the void exposure is undoubted with correspondence of medicamentary litholysis for calcite identification. Furthermore, Choleocystic kineticals like Ceruletid let recognize better hyper plastic choleocysts like adenomyomatoses. The intravenous choleocyst-cholangiography posesses a clearly limited indication scheme even after introduction of sonography and ERC. The infusion method yields a better compatibility of the contrast medium with a simultaneous increased representation quality of the bile duct, that can be increased by a consequent application of the layer exposure technique. (orig.) [de

Can sonography define the chemical composition of gall stones

International Nuclear Information System (INIS)

Frentzel-Beyme, B.; Faehndrich, R.; Arnan-Thiele, B.

1983-01-01

Eight sonographic patterns caused by gall stones are described. In an attempt to explain these different appearances, 62 stones were analysed chemically and physically. The chemical composition of the stones did not correlate with their sonographic pattern. Cholesterol stones cannot be recognised as such by sonography. The formation of an acoustic shadow depends largely on the position of the stone within the acoustic beam. It therefore follows that the examination must be done by keeping the focal plane of the transducer in proper relationship to the stone. (orig.) [de

Review of Alberta Crown Crude Oil Marketing Program

International Nuclear Information System (INIS)

Crandall, G. R.; Kromm, R. B.

1999-01-01

This report contains an independent evaluation of the operations of the private marketing agents that are currently marketing the Alberta Crown's share of royalty crude oil. The evaluation includes a review of pricing performance, working relationship, current issues and the overall performance of the marketing arrangements during the fiscal years of 1997 and 1998. Overall, the outsourcing of sales of Crown production to agents is judged to be successful. For example, it has been noted that agents are becoming more aggressive in maintaining and increasing their margins. On the other hand, the increased level of aggressiveness in marketing, while tending to maximize Crown revenues, is also creating a potential conflict on how margins should be shared between the Crown and its agents. Also, there has been evidence of some management issues between the agents and the Crown concerning the extent to which the Crown should share in any increased value which the agent generates by increased third party marketing activities. These differences need to be addressed in order to maintain the strong performance of the marketing program. The consultants also recommend additional guidelines on risk management issues that more clearly define the Crown's risk tolerance. 2 tabs., 4 figs

New genera and species of gall midges (Diptera, Cecidomyiidae from three restingas of Rio de Janeiro State, Brazil

Directory of Open Access Journals (Sweden)

Valéria Cid Maia

2001-07-01

Full Text Available Five new genera and fourteen new species of gall midges from restingas of Rio de Janeiro State are described. The larva, pupa, male, female and gall are described for each species. The new genera are: Arrabidaeamyia, Epihormomyia, Manilkaramyia, Mayteniella and Parazalepidota. The new species are: Arrabidaeamyia serrata, Asphondylia peploniae, Clinodiplosis diodiae, Clinodiplosis profusa, Clusiamyia granulosa, Dasineura couepiae, Epihormomyia miconiae, Lopesia grandis, Lopesia marginalis, Lopesia singularis, Manilkaramyia notabilis, Mayteniella distincta, Parazalepidota clusiae and Paulliniamyia ampla. Also, the larva of a previously described species, Clusiamyia nitida Maia, 1996 is described and Asphondylia byrsonimae Maia & Couri is transferred to Bruggmaniella.

The crown splash

Science.gov (United States)

Deegan, Robert; Brunet, Philippe; Eggers, Jens

2008-11-01

The impact of a drop onto a liquid layer and the subsequent splash has important implications for diverse physical processes such as air-sea gas transfer, cooling, and combustion. In the crown splash parameter regime, the splash pattern is highly regular. We focus on this case as a model for the mechanism that leads to secondary droplets, and thus explain the drop size distribution resulting from the splash. We show that the mean number of secondary droplets is determined by the most unstable wavelength of the Rayleigh-Plateau instability. Variations from this mean are governed by the width of the spectrum. Our results for the crown splash will provide the basis for understanding more complicated splashes.

Experimental and numerical modeling of shrub crown fire initiation

Science.gov (United States)

Watcharapong Tachajapong; Jesse Lozano; Shakar Mahalingam; Xiangyang Zhou; David Weise

2009-01-01

The transition of fire from dry surface fuels to wet shrub crown fuels was studied using laboratory experiments and a simple physical model to gain a better understanding of the transition process. In the experiments, we investigated the effects of varying vertical distances between surface and crown fuels (crown base height), and of the wind speed on crown fire...

Elliptic Fourier analysis of crown shapes in Quercus petraea trees

Directory of Open Access Journals (Sweden)

Ovidiu Hâruţa

2011-02-01

Full Text Available Shape is a fundamental morphological descriptor, significant in taxonomic research as well as in ecomorphology, one method of estimation being from digitally processed images. In the present study, were analysed shapes of Q. petraea crowns, pertaining to five different stem diameter classes, from three similar stands. Based on measurements on terrestrial digital vertical photos, crown size analysis was performed and correlations between crown and stem variables were tested. Linear regression equations between crown volumes and dbh, and crown volumes and stem volumes were derived, explaining more than half of data variability. Employment of elliptic Fourier analysis (EFA, a powerful analysis tool, permitted the extraction of the mean shape from crowns, characterized by high morphological variability. The extracted, most important, coefficients were used to reconstruct the average shape of the crowns, using Inverse Fourier Transform. A mean shape of the crown, corresponding to stand conditions in which competition is added as influential shaping factor, aside genetic program of the species, is described for each stem diameter class. Crown regions with highest shape variability, from the perspective of stage developmentof the trees, were determined. Accordingly, the main crown shape characteristics are: crown elongation, mass center, asymmetry with regard to the main axis, lateral regions symmetrical and asymmetrical variations.

Elliptic Fourier analysis of crown shapes in Quercus petraea trees

Directory of Open Access Journals (Sweden)

Ovidiu Hâruţa

2011-06-01

Full Text Available Shape is a fundamental morphological descriptor, significant in taxonomic research as well as in ecomorphology, one method of estimation being from digitally processed images. In the present study, were analysed shapes of Q. petraea crowns, pertaining to five different stem diameter classes, from three similar stands. Based on measurements on terrestrial digital vertical photos, crown size analysis was performed and correlations between crown and stem variables were tested. Linear regression equations between crown volumes and dbh, and crown volumes and stem volumes were derived, explaining more than half of data variability. Employment of elliptic Fourier analysis (EFA, a powerful analysis tool, permitted the extraction of the mean shape from crowns, characterized by high morphological variability. The extracted, most important, coefficients were used to reconstruct the average shape of the crowns, using Inverse Fourier Transform. A mean shape of the crown, corresponding to stand conditions in which competition is added as influential shaping factor, aside genetic program of the species, is described for each stem diameter class. Crown regions with highest shape variability, from the perspective of stage development of the trees, were determined. Accordingly, the main crown shape characteristics are: crown elongation, centroid position, asymmetry with regard to the main axis, lateral regions symmetrical and asymmetrical variations. 

Fracture Strength of Aged Monolithic and Bilayer Zirconia-Based Crowns

Directory of Open Access Journals (Sweden)

Deborah Pacheco Lameira

2015-01-01

Full Text Available The purpose of this study was to evaluate the effect of design and surface finishing on fracture strength of yttria-tetragonal zirconia polycrystal (Y-TZP crowns in monolithic (1.5 mm thickness and bilayer (0.8 mm zirconia coping and 0.7 mm porcelain veneer configuration after artificial aging. Bovine incisors received crown preparation and Y-TZP crowns were manufactured using CAD/CAM technique, according to the following groups (n=10: Polished monolithic zirconia crowns (PM; Glazed monolithic zirconia crowns (GM; Bi-layer crowns (BL. Crowns were cemented with resin cement, submitted to artificial aging in a chewing simulator (2.5 million cycles/80 N/artificial saliva/37°C, and tested for fracture strength. Two remaining crowns referring to PM and GM groups were submitted to a chemical composition analysis to measure the level of yttrium after aging. One-way ANOVA and Tukey’s test (P=.05 indicated that monolithic zirconia crowns presented similar fracture strength (PM=3476.2 N ± 791.7; GM=3561.5 N ± 991.6, which was higher than bilayer crowns (2060.4 N ± 810.6. There was no difference in the yttrium content among the three surfaces evaluated in the monolithic crowns. Thus, monolithic zirconia crowns present higher fracture strength than bilayer veneered zirconia after artificial aging and surface finishing does not affect their fracture strength.

Phases of crown-gall transformation susceptible to hydroxyurea

Directory of Open Access Journals (Sweden)

Aldona Rennert

2014-01-01

Full Text Available With the use of bacterial strains, both sensitive and resistant to hydroxyurea the action of this inhibitor on tumour formation on the leaves of Kalanchoe daigremontiana infected with Agrobacterium tumefaciens was tested for five days after inoculation. The results are in agreement with the opinion that the anti-tumour effect of hydroxyurea applied in the induction phase (between 18 and 60 h after inoculation is the result of its direct action on plant cells, whereas inhibition of tumour formation by the inhibitor in the inoculation period depends on its action on the pathogenic bacteria.

Evaluation of sampling strategies to estimate crown biomass

Science.gov (United States)

Krishna P Poudel; Hailemariam Temesgen; Andrew N Gray

2015-01-01

Depending on tree and site characteristics crown biomass accounts for a significant portion of the total aboveground biomass in the tree. Crown biomass estimation is useful for different purposes including evaluating the economic feasibility of crown utilization for energy production or forest products, fuel load assessments and fire management strategies, and wildfire...

Understory host plant and insect gall diversity changes across topographic habitats differing in nutrient and water stress in the Brazilian Amazon rainforest

OpenAIRE

JULIÃO, Genimar Rebouças; ALMADA, Emmanuel Duarte; COSTA, Flávia Regina Capellotto; CARNEIRO, Marco Antônio Alves; FERNANDES, G. Wilson

2017-01-01

ABSTRACT Topographic gradients in terra firme forests are associated with pronounced changes in soil texture, soil nutrients and distance to the water-table, thereby creating different hydric and nutritional conditions for plants and their associated herbivore community. The aim of this study was to investigate galling species and host plant richness and gall species composition across topographic habitats differing in nutrient and water stress in the Brazilian Amazon rainforest. Nineteen 250...

Revealing the inventory of type III effectors in Pantoea agglomerans gall-forming pathovars using draft genome sequences and a machine-learning approach.

Science.gov (United States)

Nissan, Gal; Gershovits, Michael; Morozov, Michael; Chalupowicz, Laura; Sessa, Guido; Manulis-Sasson, Shulamit; Barash, Isaac; Pupko, Tal

2018-02-01

Pantoea agglomerans, a widespread epiphytic bacterium, has evolved into a hypersensitive response and pathogenicity (hrp)-dependent and host-specific gall-forming pathogen by the acquisition of a pathogenicity plasmid containing a type III secretion system (T3SS) and its effectors (T3Es). Pantoea agglomerans pv. betae (Pab) elicits galls on beet (Beta vulgaris) and gypsophila (Gypsophila paniculata), whereas P. agglomerans pv. gypsophilae (Pag) incites galls on gypsophila and a hypersensitive response (HR) on beet. Draft genome sequences were generated and employed in combination with a machine-learning approach and a translocation assay into beet roots to identify the pools of T3Es in the two pathovars. The genomes of the sequenced Pab4188 and Pag824-1 strains have a similar size (∼5 MB) and GC content (∼55%). Mutational analysis revealed that, in Pab4188, eight T3Es (HsvB, HsvG, PseB, DspA/E, HopAY1, HopX2, HopAF1 and HrpK) contribute to pathogenicity on beet and gypsophila. In Pag824-1, nine T3Es (HsvG, HsvB, PthG, DspA/E, HopAY1, HopD1, HopX2, HopAF1 and HrpK) contribute to pathogenicity on gypsophila, whereas the PthG effector triggers HR on beet. HsvB, HsvG, PthG and PseB appear to endow pathovar specificities to Pab and Pag, and no homologous T3Es were identified for these proteins in other phytopathogenic bacteria. Conversely, the remaining T3Es contribute to the virulence of both pathovars, and homologous T3Es were found in other phytopathogenic bacteria. Remarkably, HsvG and HsvB, which act as host-specific transcription factors, displayed the largest contribution to disease development. © 2016 BSPP AND JOHN WILEY & SONS LTD.

Characterization of Microsolvated Crown Ethers from Broadband Rotational Spectroscopy

Science.gov (United States)

Perez, Cristobal; Schnell, Melanie; Blanco, Susana; Lopez, Juan Carlos

2016-06-01

Since they were first synthetized, crown ethers have been extensively used in organometallic chemistry due to their unparalleled binding selectivity with alkali metal cations. From a structural point of view, crown ethers are heterocycles containing oxygen and/or other heteroatoms, although the most common ones are formed from ethylene oxide unit. Crown ethers are conventionally seen as being hydrophilic inside and hydrophobic outside when the structures found for the metal cation complexes are considered. However, crown ethers are extremely flexible and in isolation may present a variety of stable conformations so that their structure may be easily adapted in presence of a strong ligand as an alkali metal cation minimize the energy of the resulting complex. Water can be considered a soft ligand which interacts with crown ethers through moderate hydrogen bonds. It is thus interesting to investigate which conformers are selected by water to form complexes, the preferred interaction sites and the possible conformational changes due to the presence of one or more water molecules. Previous studies identified microsolvated crown ethers but in all cases with a chromophore group attached to the structure. Here we present a broadband rotational spectroscopy study of microsolvated crown ethers produced in a pulsed molecular jet expansion. Several 1:1 and 1:2 crown ether:water aggregates are presented for 12-crown-4, 15-crown-5 and 18-crown-6. Unambiguous identification of the structures has been achieved using isotopic substitution within the water unit. The subtle changes induced in the structures of the crown ether monomer upon complexation and the hydrogen-bonding network that hold them together will be also discussed. F. Gámez, B. Martínez-Haya, S. Blanco,J. C. López and J. L. Alonso, Phys. Chem. Chem. Phys. 2014, 14 12912-12918 V. A. Shubert, C.W. Müller and T. Zwier, J. Phys. Chem. A 2009, 113 8067-8079

Shifts in Plant Assemblages Reduce the Richness of Galling Insects Across Edge-Affected Habitats in the Atlantic Forest.

Science.gov (United States)

Souza, Danielle G; Santos, Jean C; Oliveira, Marcondes A; Tabarelli, Marcelo

2016-10-01

Impacts of habitat loss and fragmentation on specialist herbivores have been rarely addressed. Here we examine the structure of plant and galling insect assemblages in a fragmented landscape of the Atlantic forest to verify a potential impoverishment of these assemblages mediated by edge effects. Saplings and galling insects were recorded once within a 0.1-ha area at habitat level, covering forest interior stands, forest edges, and small fragments. A total of 1,769 saplings from 219 tree species were recorded across all three habitats, with differences in terms of sapling abundance and species richness. Additionally, edge-affected habitats exhibited reduced richness of both host-plant and galling insects at plot and habitat spatial scale. Attack levels also differed among forest types at habitat spatial scale (21.1% of attacked stems in forest interior, 12.4% in small fragments but only 8.5% in forest edges). Plot ordination resulted in three clearly segregated clusters: one formed by forest interior, one by small fragments, and another formed by edge plots. Finally, the indicator species analysis identified seven and one indicator plant species in forest interior and edge-affected habitats, respectively. Consequently, edge effects lead to formation of distinct taxonomic groups and also an impoverished assemblage of plants and galling insects at multiple spatial scales. The results of the present study indicate that fragmentation-related changes in plant assemblages can have a cascade effects on specialist herbivores. Accordingly, hyperfragmented landscapes may not be able to retain an expressive portion of tropical biodiversity. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Digital photography for urban street tree crown conditions

Science.gov (United States)

Neil A. Clark; Sang-Mook Lee; William A. Bechtold; Gregory A. Reams

2006-01-01

Crown variables such as height, diameter, live crown ratio, dieback, transparency, and density are all collected as part of the overall crown assessment (USDA 2004). Transparency and density are related to the amount of foliage and thus the photosynthetic potential of the tree. These measurements are both currently based on visual estimates and have been shown to be...

Resistance to Root Galling Caused by the Powdery Scab Pathogen Spongospora subterranea in Potato

Science.gov (United States)

Potato selections (clones and commercial cultivars) were examined for resistance to root galling, caused by the powdery scab pathogen Spongospora subterranea in 7 field trials conducted between 2003 and 2007 in the states of Washington (WA) and Idaho (ID). In 2003, Shepody demonstrated the highest l...

Crown Fire Potential

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — Crown fire potential was modeled using FlamMap, an interagency fire behavior mapping and analysis program that computes potential fire behavior characteristics. The...

Effect of posterior crown margin placement on gingival health.

Science.gov (United States)

Reitemeier, Bernd; Hänsel, Kristina; Walter, Michael H; Kastner, Christian; Toutenburg, Helge

2002-02-01

The clinical impact of posterior crown margin placement on gingival health has not been thoroughly quantified. This study evaluated the effect of posterior crown margin placement with multivariate analysis. Ten general dentists reviewed 240 patients with 480 metal-ceramic crowns in a prospective clinical trial. The alloy was randomly selected from 2 high gold, 1 low gold, and 1 palladium alloy. Variables were the alloy used, oral hygiene index score before treatment, location of crown margins at baseline, and plaque index and sulcus bleeding index scores recorded for restored and control teeth after 1 year. The effect of crown margin placement on sulcular bleeding and plaque accumulation was analyzed with regression models (Prisk of bleeding at intrasulcular posterior crown margins was approximately twice that at supragingival margins. Poor oral hygiene before treatment and plaque also were associated with sulcular bleeding. Facial sites exhibited a lower probability of sulcular bleeding than lingual surfaces. Type of alloy did not influence sulcular bleeding. In this study, placement of crown margins was one of several parameters that affected gingival health.

The authority and types for the hackberry gall psyllid genus Pachypsylla (Riley) (Hemiptera-Homoptera: Psyllidae)

Science.gov (United States)

The nomenclatural problems with the hackberry gall psyllid species names are rectified. The genus Pachypsylla Riley, 1883, type species, Psylla venusta Osten-Sacken, includes 14 nominal species. These are: Pachypsylla venusta (Osten-Sacken, 1861); P. celtidismamma Riley, 1875; P. celtidisgemma Ri...

Solvent Effects on Cesium Complexation with Crown Ethers from Liquid to Supercritical Fluids

International Nuclear Information System (INIS)

Wai, Chien M.; Rustenholtz, Anne; Wang, Shaofen; Lee, Su-Chen; Herman, Jamie; Porter, Richard A.

2004-01-01

Nuclear magnetic resonance (NMR) techniques were used to study crown ether-water interactions in solvents of low dielectric constants such as chloroform and carbon tetrachloride. Water forms a 1:1 complex with a number of crown ethers including 12-crown-4, 15-crown-5, 18-crown-6, dicyclohexano-18=crown-6, dicyclohexano-24-crown 8, and dibenzl-24-crown-8 in chloroform. Among these crown ethers, the 18-crown-6-H2 complex has the largest equilibrium constant (K=545) and 97% of the crown is complexed to water in chloroform. Addition of carbon tetrachloride to chloroform lowers the equilibrium constants of the crown-water complexes. The partition coefficients of crown ethers (D=crown in water/crown in solvent) between water and organic solvent also vary with solvent composition

New Genus and Species of Gall Midges (Diptera, Cecidomyiidae, Porricondylinae, Holoneurini from the Late Eocene Amber of Olevsk (Zhitomir Region, Ukraine

Directory of Open Access Journals (Sweden)

Fedotova Z. A.

2017-02-01

Full Text Available Gall midges are reported for the first time in Late Eocene Rovno amber from the Olevsk, Zhitomir Region. This is the second amber locality to yield gall midges in the Zhitomir Region, after Gulyanka. Rovnoholoneurus gen. n. and two new species, Rovnoholoneurus davidi sp. n. and R. miyae sp. n. are described. Bryocrypta laqueata Fedotova, 2005 is transferred to the genus Rovnoholoneurus, and Rovnoholoneurus laqueatus (Fedotova, 2005, comb. n. is established. A key to the species of Rovnoholoneurus is provided.

Advances in genetics. Volume 22: Molecular genetics of plants

International Nuclear Information System (INIS)

Scandalios, J.G.; Caspari, E.W.

1984-01-01

This book contains the following four chapters: Structural Variation in Mitochondrial DNA; The Structure and Expression of Nuclear Genes in Higher Plants; Chromatin Structure and Gene Regulation in Higher Plants; and The Molecular Genetics of Crown Gall Tumorigenesis

Descriptive statistics of tree crown condition in the Northeastern United States

Science.gov (United States)

KaDonna C. Randolph; Randall S. Morin; Jim Steinman

2010-01-01

The U.S. Forest Service Forest Inventory and Analysis (FIA) Program uses visual assessments of tree crown condition to monitor changes and trends in forest health. This report describes four crown condition indicators (crown dieback, crown density, foliage transparency, and sapling crown vigor) measured in Connecticut, Delaware, Maine, Maryland, Massachusetts, New...

Fracture rates of IPS Empress all-ceramic crowns--a systematic review.

Science.gov (United States)

Heintze, Siegward D; Rousson, Valentin

2010-01-01

The aim of this study was to evaluate the clinical fracture rate of crowns fabricated with the pressable, leucite-reinforced ceramic IPS Empress, and relate the results to the type of tooth restored. The database SCOPUS was searched for clinical studies involving full-coverage crowns made of IPS Empress. To assess the fracture rate of the crowns in relation to the type of restored tooth and study, Poisson regression analysis was used. Seven clinical studies were identified involving 1,487 adhesively luted crowns (mean observation time: 4.5+/-1.7 years) and 81 crowns cemented with zinc-phosphate cement (mean observation time: 1.6+/-0.8 years). Fifty-seven of the adhesively luted crowns fractured (3.8%). The majority of fractures (62%) occurred between the third and sixth year after placement. There was no significant influence regarding the test center on fracture rate, but the restored tooth type played a significant role. The hazard rate (per year) for crowns was estimated to be 5 in every 1,000 crowns for incisors, 7 in every 1,000 crowns for premolars, 12 in every 1,000 crowns for canines, and 16 in every 1,000 crowns for molars. One molar crown in the zinc-phosphate group fractured after 1.2 years. Adhesively luted IPS Empress crowns showed a low fracture rate for incisors and premolars and a somewhat higher rate for molars and canines. The sample size of the conventionally luted crowns was too small and the observation period too short to draw meaningful conclusions.

Marginal Fit of CEREC Crowns at Different Finish Line Curvatures

Science.gov (United States)

2015-06-01

the percolation of bacteria. Micro-leakage in the oral cavity can cause inflammation of the vital pulp and caries. Poor marginal adaptation of...exhibit physiologically age-related gingival recession; similarly, patients with a history of periodontal disease may have pathologic gingival...Mikroleakage - ful crowns and the dental pulp . Journal of Endodontics, 18, 473. Grey, N., Piddock, V., & Wilson, M. {1993). In vitro comparison of

Biocontrol with Trichoderma species for the management of postharvest crown rot of banana

Directory of Open Access Journals (Sweden)

G. Sangeetha

2009-09-01

Full Text Available Lasiodiplodia theobromae and Colletotrichum musae cause the postharvest crown rot disease complex of banana. In vitro experiments evaluated the effect of twelve isolates of Trichoderma spp. from the soil of organic banana orchards (‘native isolates’ and eight isolates of Trichoderma spp. from culture collections (‘introduced isolates’ on the two pathogens. The native and introduced Trichoderma spp. had varied antagonistic effects against the two pathogens. Eight Trichoderma spp. isolates effective in the in vitro assays were evaluated singly on fruits both at room temperature and in cold storage. Single antagonists did not satisfactorily control crown rot on the fruits as compared with the fungicide carbendazim. However, two isolates of T. viride, one of T. harzianum and one of T. koningii performed well when applied singly, and these were selected for evaluation in isolate mixtures. There was very little antagonism between these isolates. Of 11 two-way, three-way and four-way mixtures of these isolates, the four-way and a three-way mixtures reduced crown rot incidence, both at room temperature and in cold storage, giving better control than carbendazim. The study identified consortia of compatible Trichoderma antagonists with superior biocontrol potential for the management of the postharvest crown rot complex of banana.

[Finite element analysis of the maxillary central incisor with traditional and modified crown lengthening surgery and post-core restoration in management of crown-root fracture].

Science.gov (United States)

Zhen, M; Wei, Y P; Hu, W J; Rong, Q G; Zhang, H

2016-06-01

To construct three-dimensional finite element models with modified crown lengthening surgery and post-core restoration in management of various crown-root fracture types, to investigate the intensity and distribution of stressin models mentioned above, and to compare and analyze the indications of traditional and modified crown lengthening surgeries from the mechanic point of view. Nine three-dimensional finite element models with modified crown lengthening surgery and post-core restoration were established and analyzed by micro-CT scanning technique, dental impression scanner, Mimics 10.0, Geomagic studio 9.0 and ANSYS 14.0 software. The von Mises stress of dentin, periodontal ligament, alveolar bone, post and core, as well as the periodontal ligament area and threshold limit value were calculated and compared with the findings of traditional crown lengthening models which had been published earlierby our research group. The von Mises stress intensity of modified crown lengthening models were: dentin>post>core>alveolar bone>periodontal ligament. The maximum von Mises stress of dentin(44.37-80.58 MPa)distributed in lingual central shoulder. The periodontal ligament area of the modified crown lengthening surgery was reduced by 6% to 28%, under the same crown-root fracture conditions, the periodontal ligament area of modified crown lengthening models was larger than that of the traditional crown lengthening models. In modified crown lengthening surgery models, the von Mises stress of periodontal ligament of B3L1m, B3L2m, B3L3m models exceeded their limit values, however, the von Mises stress of periodontal ligament of the B2L2c, B2L3c, B3L1c, B3L2c, B3L3c models exceeded their limit values in traditional crown lengthening surgery models. The modified crown lengthening surgery conserves more periodontal supporting tissues, which facilitates the long-term survival of teeth. The indication of modified crown lengthening surgery is wider than traditional method. The

Navigating through the Crown land process

Energy Technology Data Exchange (ETDEWEB)

Dawson, M. [Samsung Renewable Energy Inc., ON (Canada)

2010-07-01

Samsung Communications and Technology (Samsung C and T) and the Korea Electric Power Corporation are planning to invest approximately $7 billion to generate 2500 MW of wind and solar energy in Ontario. The plan was centred around the green energy investment agreement signed in January 2010. To date, only 1 project in Ontario has been permitted for development on Crown land, and there have been 3 different versions of the Crown land policy and procedure for the development of wind power projects. The Crown land process is challenged by issues related to grandfathering, timing, competing processes, and the Endangered Species Act. Guidance is needed to identify requirements for studies and evaluation processes. Additional studies are often required by government agencies when new documents and results are reviewed. Projects are also delayed when new species are added to the endangered species list. Wind power developers must keep abreast of proposed regulations and guidelines to ensure that work programs are not delayed. An overview of the current Crown land development process was included. tabs., figs.

Sex-mediated herbivory by galling insects on Baccharis concinna (Asteraceae Herbivoria por insetos galhadores mediada pelo sexo em Baccharis concinna (Asteraceae

Directory of Open Access Journals (Sweden)

Marco Antonio A. Carneiro

2006-09-01

Full Text Available The interaction patterns between the dioecious shrub Baccharis concinna Barroso (Asteraceae and its speciose galling insect community were studied in southeastern Brazil. Two hypotheses were tested in this study: "the differential reproduction and growth hypothesis" that predicts that male plants present fewer reproductive structures and are larger than female plants; and the 'sex-biased herbivory hypothesis' that predicts that male plants support a larger abundance of insect galls than female plants. Plants did not show sexual dimorphism in growth (= mean leaf number. However, male plants had longer shoots and a lower average number of inflorescences than female plants. These results corroborate the hypothesis that male plants grow more and reproduce less than female plants. No statistically significant difference was found in the number of galls between male and female plants, but a sex by environmental effect on gall number was detected. When each species of galling insect was individually analyzed per population of the host plant, the rates of attack varied between sex and population of the host plant, and they were highly variable among the species of galling insects. These results highlight the importance of the interaction between sex and environment in the community structure of galling insects and indicate that other variables besides host sex may influence the patterns of attack by galling herbivores.Os padrões de interação entre o arbusto dióico Baccharis concinna Barroso (Asteraceae e sua diversa comunidade de insetos galhadores foram estudados na região sudeste do Brasil. Duas hipóteses foram testadas neste estudo: "a hipótese do crescimento e reprodução diferenciais", que prevê que plantas masculinas apresentam menos estruturas reprodutivas e são maiores do que plantas femininas; e a "hipótese da herbivoria mediada pelo sexo" que prevê que plantas masculinas sustentam uma maior abundância de insetos galhadores do que

Fatigue resistance of CAD/CAM resin composite molar crowns.

NARCIS (Netherlands)

Shembish, F.A.; Tong, H.; Kaizer, M.; Janal, M.N.; Thompson, V.P.; Opdam, N.J.M.; Zhang, Y.

2016-01-01

OBJECTIVE: To demonstrate the fatigue behavior of CAD/CAM resin composite molar crowns using a mouth-motion step-stress fatigue test. Monolithic leucite-reinforced glass-ceramic crowns were used as a reference. METHODS: Fully anatomically shaped monolithic resin composite molar crowns (Lava

Fracture Resistance Force of Primary Molar Crowns Milled from ...

African Journals Online (AJOL)

2018-04-04

Apr 4, 2018 ... molar stainless steel crown (SSC) and stored in water at 37°C for 30 days. The crowns were seated on Cr‑Co ... model) or chairside (in‑office system model) CAD/ ..... crowns, deformation may be observed instead of fracture.

Bis(hydroxyammonium hexachloridoplatinate(IV–18-crown-6 (1/2

Directory of Open Access Journals (Sweden)

Evgeny Bulatov

2014-01-01

Full Text Available In the title complex, (NH3OH2[PtCl6]·2C12H24O6, the PtIV atom is coordinated by six chloride anions in a slightly distorted octahedral geometry. The Pt—Cl bond lengths are comparable to those reported for other hexachloridoplatinate(IV species. The hydroxyammonium groups act as linkers between the [PtCl6]2− anion and the crown ether molecules. The anion is linked to two hydroxyammonium cations via O—H...Cl hydrogen bonds and each hydroxyammonium moiety is linked to a crown ether molecule by hydrogen bonds between ammonium H atoms and 18-crown-6 O atoms. The crown ether molecules have the classic crown shape in which all O atoms are located in the inner part of the crown ether ring and all –CH2– groups are turned to the outside.

AB INITIO INVESTIGATION OF 12-CROWN-4 AND BENZO-12-CROWN-4 COMPLEXES WITH Li+, Na+, K+, Zn2+, Cd2+, AND Hg2+

Directory of Open Access Journals (Sweden)

Yahmin Yahmin

2010-06-01

Full Text Available The structure and binding energies of 12-crown-4 and benzo-12-crown-4 complexes with Li+, Na+, K+, Zn2+, Cd2+, and Hg2+were investigated with ab initio calculations using Hartree-Fock approximation and second-order perturbation theory. The basis set used in this study is lanl2mb. The structure optimization of cation-crown ether complexes was evaluated at HF/lanl2mb level of theory and interaction energy of the corresponding complexes was calculated at MP2/lanl2mb level of theory (MP2/lanl2mb//HF/lanl2mb. Interactions of the crown ethers and the cations were discussed in term of the structure parameter of crown ether. The binding energies of the complexes show that all complex formed from transition metal cations is more stable than the complexes formed from alkali metal cations.   Keywords: 12-crown-4, benzo-12-crown-4, alkali metals, transition metals

Celticecis, a Genus of Gall Midges (Diptera: Cecidomyiidae), Newly Reported for the Western Palearctic Region

Science.gov (United States)

Raymond J. Gagné; John C. Moser

1997-01-01

Many Holarctic genera of trees and shrubs are host over much of their ranges to particular genera of Cecidomyiidae. As examples, willows host gall midges of Rabdophaga and Iteomyia, oaks host Macrodiplosis and Polystepha, and birches host Semudobia in both the Nearctic and...

Coast redwood live crown and sapwood

Science.gov (United States)

John-Pascal Berrill; Jesse L. Deffress; Jessica M. Engle

2012-01-01

Understanding crown rise and sapwood taper will help meet management objectives such as producing long branch-free boles for clear wood and old-growth restoration, or producing sawlogs with a high proportion of heartwood. Coast redwood (Sequoia sempervirens) tree crown ratio data were collected 20 years after partial harvesting in a 65-year-old second growth stand....

Pharmacognostic studies of insect gall of Quercus infectoria Olivier (Fagaceae)

Institute of Scientific and Technical Information of China (English)

Savitri Shrestha; Vasuki Srinivas Kaushik; Ravi Shankara Birur Eshwarappa; Sundara Rajan Subaramaihha; Latha Muuaiah Ramanna; Dhananjaya Bhadrapura Lakkappa

2014-01-01

Objective:To study the detailed pharmacognostic profile of galls of Quercus infectoria Olivier (Q. infectoria olivier) (Fagaceae), an important medicinal plant used in the Indian system of medicine. Methods: Samples of galls of Q. infectoria were studied by macroscopical, microscopical, physiochemical, phytochemical, fluorescence analysis and othjer methods for standardization as recommended by WHO. Results:Macroscopically, the crude drug is globose with horny appearances on external surface (1.4-2.3 cm in length and 1-1.5 cm in diameter), with greyish-brown to brownish-black in colour externally and dark brown buff colored. Surface is smooth with numerous horny protuberances giving rough touch, and with unpleasant odour. Microscopically, a wide zone of radially elongated parenchyma cells between upper and lower epidermis were found. The vascular strands were present at all places and radially elongated sclerides touched the lower epidermis. In physico-chemical studies, the moisture, total ash, acid insoluble ash, alcohol soluble, water soluble, petroleum ether, chloroform extractive value and tannin content were found to be 2.790, 5.020, 0.110, 38.780, 41.210, 0.402, 1.590 and 49.200 percentage respectively. Preliminary phytochemical screening showed the presence of phenols, flavonoids, steroids, triterpenes, tannins, saponins and alkaloids. Conclusions:The results of the present study serve as a valuable source of information and provide suitable standards for identification of this medicinally important plant drug material for future investigations and applications.

Retention Load Values of Telescopic Crowns Made of Y-TZP and CoCr with Y-TZP Secondary Crowns: Impact of Different Taper Angles

Directory of Open Access Journals (Sweden)

Susanne Merk

2016-05-01

Full Text Available This study aimed to examine and compare the retention load values (RL of different telescopic crown assemblies (Y-TZP and CoCr primary crowns with electroformed and Y-TZP secondary crowns each with three different taper angles (0°, 1° and 2°. Thirty Y-TZP primary crowns with electroformed gold copings (Z/G group and Y-TZP secondary crowns (Z/Z group and 30 CoCr primary crowns with electroformed gold copings (C/G group and Y-TZP secondary crowns (C/Z group, each with taper angles of 0°, 1° and 2°, were fabricated, respectively. With the exception of the electroformed gold copings, all specimens were Computer-Aided-Design/Computer-Aided-Manufacturing (CAD/CAM-milled, then sintered and afterwards manually adapted. In order to stabilize the gold copings, they were fixed in a tertiary structure. The secondary crowns were constructed with a hook, which ensured self-alignment with an upper chain. Afterwards, 20 pull-off test cycles were performed in a universal testing machine under artificial saliva and after weighing the secondary crowns with a 5 kg object for 20 s. Data were analyzed by one-way and two-way Analysis of Variance (ANOVA. C/Z with 1° showed higher (p = 0.009 RL than 0° and 2° tapers. C/G at 1° also showed higher (p = 0.001 RL than at tapers of 0° and 2°. Z/G and C/G at 0° showed lower RL than Z/Z and C/Z (p < 0.001. Primary crowns had no impact on the 0° group. Z/G showed lower RL as compared to C/Z within the 1° group (p = 0.007 and Z/Z in the 2° group (p = 0.006. The primary crown material had no influence on RL. Electroformed copings showed lower RL. Further investigations for 1° as well as for the long-term performance after thermomechanical aging are necessary.

New atraumatic easy removal technique for permanently cemented crown

Directory of Open Access Journals (Sweden)

Pravinkumar G Patil

2012-01-01

Full Text Available Removal of a permanently cemented crown or fixed partial denture is a cumbersome procedure for a prosthodontist, especially when there is no purchase point available to remove it. The technique described in this article consists of sectioning of a crown on facial surface followed by removal of the crown with orthodontic plier. This technique does not damage the gingival/periodontal tissues or underlying tooth structure as the crown need not to be removed with jerky back-action force.

Root-Crown Relations of Young Sugar Maple and Yellow Birch

Science.gov (United States)

Carl H. Tubbs

1977-01-01

Young forest-grown sugar maple and yellow birch (1 to 6 inches d.b.h.) crowns were mapped and roots excavated. Crown dimensions were compared. Sugar maple roots usually terminated within a few feet of the crown perimeter. Yellow birch roots frequently terminated well outside crown perimeters and roots of birch were more irregularly distributed than those of maple....

Extracting oil palm crown from WorldView-2 satellite image

Science.gov (United States)

Korom, A.; Phua, M.-H.; Hirata, Y.; Matsuura, T.

2014-02-01

Oil palm (OP) is the most commercial crop in Malaysia. Estimating the crowns is important for biomass estimation from high resolution satellite (HRS) image. This study examined extraction of individual OP crown from a WorldView-2 image using twofold algorithms, i.e., masking of Non-OP pixels and detection of individual OP crown based on the watershed segmentation of greyscale images. The study site was located in Beluran district, central Sabah, where matured OPs with the age ranging from 15 to 25 years old have been planted. We examined two compound vegetation indices of (NDVI+1)*DVI and NDII for masking non-OP crown areas. Using kappa statistics, an optimal threshold value was set with the highest accuracy at 90.6% for differentiating OP crown areas from Non-OP areas. After the watershed segmentation of OP crown areas with additional post-procedures, about 77% of individual OP crowns were successfully detected in comparison to the manual based delineation. Shape and location of each crown segment was then assessed based on a modified version of the goodness measures of Möller et al which was 0.3, indicating an acceptable CSGM (combined segmentation goodness measures) agreements between the automated and manually delineated crowns (perfect case is '1').

Extracting oil palm crown from WorldView-2 satellite image

International Nuclear Information System (INIS)

Korom, A; Phua, M-H; Hirata, Y; Matsuura, T

2014-01-01

Oil palm (OP) is the most commercial crop in Malaysia. Estimating the crowns is important for biomass estimation from high resolution satellite (HRS) image. This study examined extraction of individual OP crown from a WorldView-2 image using twofold algorithms, i.e., masking of Non-OP pixels and detection of individual OP crown based on the watershed segmentation of greyscale images. The study site was located in Beluran district, central Sabah, where matured OPs with the age ranging from 15 to 25 years old have been planted. We examined two compound vegetation indices of (NDVI+1)*DVI and NDII for masking non-OP crown areas. Using kappa statistics, an optimal threshold value was set with the highest accuracy at 90.6% for differentiating OP crown areas from Non-OP areas. After the watershed segmentation of OP crown areas with additional post-procedures, about 77% of individual OP crowns were successfully detected in comparison to the manual based delineation. Shape and location of each crown segment was then assessed based on a modified version of the goodness measures of Möller et al which was 0.3, indicating an acceptable CSGM (combined segmentation goodness measures) agreements between the automated and manually delineated crowns (perfect case is '1')

Wilt, crown, and root rot of common rose mallow (Hibiscus moscheutos) caused by a novel Fusarium sp

Science.gov (United States)

A new crown and root rot disease of landscape plantings of the malvaceous ornamental common rose mallow (Hibiscus moscheutos) was first detected in Washington State in 2012. The main objectives of this study were to complete Koch's postulates, document the disease sypmtoms photographically, and iden...

Two new herb gall wasps from Spain, including the description of a new species of Aulacidea Ashmead, 1897 (Hymenoptera, Cynipidae, “Aylacini” inducing galls on Serratula nudicaulis L. DC (Asteraceae

Directory of Open Access Journals (Sweden)

Nieves-Aldrey, J. L.

2012-12-01

Full Text Available Two new species of herb gall wasps are recorded from Spain, which induce galls on flower heads of Serratula nudicaulis L. DC (Asteraceae. Isocolus serratulae (Mayr, 1882 is recorded for the first time in Spain, while a new species of Aulacidea Ashmead, 1897, Aulacidea pilarae sp. n., is described. This new species is similar to Aulacidea serratulae Diakontschuk, 1984, which is found throughout Oriental Europe. However, those two congeneric species may be distinguished by the morphology of the adults.Se citan dos nuevas especies de avispas de las agallas en plantas herbáceas para España. Las dos especies inducen agallas en cabezuelas florales de Serratula nudicaulis L. DC (Asteraceae y se han encontrado en el valle del Lozoya (Madrid, España Central. Isocolus serratulae (Mayr, 1882 se cita por primera vez para la Península Ibérica y se describe una especie nueva de Aulacidea Ashmead, 1897: A. pilarae sp. n. La nueva especie es similar a Aulacidea serratulae Diakontschuk, 1984 citada de Europa oriental, diferenciándose por la morfología de los adultos.

Gall inducing arthropods from a seasonally dry tropical forest in Serra do Cipó, Brazil Artrópodes indutores de galhas em Floresta Sazonal Tropical Seca da Serra do Cipó, Brasil

Directory of Open Access Journals (Sweden)

Marcel Serra Coelho

2009-01-01

Full Text Available Highly diverse forms of galling arthropods can be identified in much of southeastern Brazil's vegetation. Three fragments of a Seasonally Dry Tropical Forest (SDTF located in the southern range of the Espinhaço Mountains were selected for study in the first survey of galling organisms in such tropical vegetation. Investigators found 92 distinct gall morphotypes on several organs of 51 host plant species of 19 families. Cecidomyiidae (Diptera was the most prolific gall-inducing species, responsible for the largest proportion of galls (77% observed. Leaves were the most frequently galled plant organ (63%, while the most common gall morphotype was of a spherical shape (30%. The two plant species, Baccharis dracunculifolia (Asteraceae and Celtis brasiliensis (Cannabaceae, presented the highest number of gall morphtypes, displaying an average of 5 gall morphotypes each. This is the first study of gall-inducing arthropods and their host plant species ever undertaken in a Brazilian SDTF ecosystem. Given the intense human pressure on SDTFs, the high richness of galling arthropods, and implied floral host diversity found in this study indicates the need for an increased effort to catalogue the corresponding flora and fauna, observe their intricate associations and further understand the implications of such rich diversity in these stressed and vulnerable ecosystems.Artrópodes indutores de galhas são muito ricos em espécies nas formações vegetais no sudeste do Brasil. Três fragmentos de Floresta Sazonal Tropical Seca (FSTS foram selecionados nas montanhas do sudeste da cadeia do Espinhaço para a primeira pesquisa de organismos indutores de galhas nesse tipo de vegetação. Encontramos 92 morfotipos distintos de galhas em vários órgãos de 51 espécies de plantas hospedeiras pertencentes à 19 famílias. A maioria das galhas (77% foi induzida pela família Cecidomyiidae (Diptera. A folha foi o órgão mais atacado (63%, enquanto o morfotipo mais

A short-term clinical evaluation of IPS Empress 2 crowns.

Science.gov (United States)

Toksavul, Suna; Toman, Muhittin

2007-01-01

The aim of this study was to evaluate the clinical performance of all-ceramic crowns made with the IPS Empress 2 system after an observation period of 12 to 60 months. Seventy-nine IPS Empress 2 crowns were placed in 21 patients. The all-ceramic crowns were evaluated clinically, radiographically, and using clinical photographs. The evaluations took place at baseline (2 days after cementation) and at 6-month intervals for 12 to 60 months. Survival rate of the crowns was determined using Kaplan-Meier statistical analysis. Based on the US Public Health Service criteria, 95.24% of the crowns were rated satisfactory after a mean follow-up period of 58 months. Fracture was registered in only 1 crown. One endodontically treated tooth failed as a result of fracture at the cervical margin area. In this in vivo study, IPS Empress 2 crowns exhibited a satisfactory clinical performance during an observation period ranging from 12 to 60 months.

Co-inoculation with rhizobia and AMF inhibited soybean red crown rot: from field study to plant defense-related gene expression analysis.

Directory of Open Access Journals (Sweden)

Xiang Gao

Full Text Available Soybean red crown rot is a major soil-borne disease all over the world, which severely affects soybean production. Efficient and sustainable methods are strongly desired to control the soil-borne diseases.We firstly investigated the disease incidence and index of soybean red crown rot under different phosphorus (P additions in field and found that the natural inoculation of rhizobia and arbuscular mycorrhizal fungi (AMF could affect soybean red crown rot, particularly without P addition. Further studies in sand culture experiments showed that inoculation with rhizobia or AMF significantly decreased severity and incidence of soybean red crown rot, especially for co-inoculation with rhizobia and AMF at low P. The root colony forming unit (CFU decreased over 50% when inoculated by rhizobia and/or AMF at low P. However, P addition only enhanced CFU when inoculated with AMF. Furthermore, root exudates of soybean inoculated with rhizobia and/or AMF significantly inhibited pathogen growth and reproduction. Quantitative RT-PCR results indicated that the transcripts of the most tested pathogen defense-related (PR genes in roots were significantly increased by rhizobium and/or AMF inoculation. Among them, PR2, PR3, PR4 and PR10 reached the highest level with co-inoculation of rhizobium and AMF.Our results indicated that inoculation with rhizobia and AMF could directly inhibit pathogen growth and reproduction, and activate the plant overall defense system through increasing PR gene expressions. Combined with optimal P fertilization, inoculation with rhizobia and AMF could be considered as an efficient method to control soybean red crown rot in acid soils.

Twenty-nine-month follow-up of a paediatric zirconia dental crown.

Science.gov (United States)

Lopez Cazaux, Serena; Hyon, Isabelle; Prud'homme, Tony; Dajean Trutaud, Sylvie

2017-06-14

The aim of this paper is to present the long-term follow-up of one paediatric zirconia crown on a deciduous molar. Preformed crowns are part of the armamentarium in paediatric dentistry. In recent years, aesthetic alternatives to preformed metal crowns have been developed, first preveneered crowns and then zirconia crowns. This paper describes the restoration of a primary molar with a zirconia crown (EZ-Pedo, Loomis, California, USA) in an 8-year-old boy. In this clinical case, the protocol for the implementation and maintenance of zirconia crowns is detailed. The patient was followed up for 29 months until the natural exfoliation of his primary molar. The adaptation of the zirconia crown, the gingival health and the wear on the opposing tooth were considered. In this case, the paediatric zirconia crown allowed sustainable functional restoration while restoring a natural appearance of the tooth. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Re/crowning the Jowo Śākyamuni

DEFF Research Database (Denmark)

Warner, Cameron

2011-01-01

of ritual observance and visions received.  In 1409, Tsongkhapa Lozang Drakpa  (1357-1419) crowned the Jowo, changing his doctrinal and iconographic representations.  I connect the controversy surrounding Tsongkhapa's decision to re/crown the Jowo in 1409 to the significance placed on authenticity...

Crown Ether Complexes of Alkali-Metal Chlorides from SO2.

Science.gov (United States)

Reuter, Kirsten; Rudel, Stefan S; Buchner, Magnus R; Kraus, Florian; von Hänisch, Carsten

2017-07-18

The structures of alkali-metal chloride SO 2 solvates (Li-Cs) in conjunction with 12-crown-4 or 1,2-disila-12-crown-4 show strong discrepancies, despite the structural similarity of the ligands. Both types of crown ethers form 1:1 complexes with LiCl to give [Li(1,2-disila-12-crown-4)(SO 2 Cl)] (1) and [Li(12-crown-4)Cl]⋅4 SO 2 (2). However, 1,2-disila-12-crown-4 proved unable to coordinate cations too large for the cavity diameter, for example, by the formation of sandwich-type complexes. As a result, 12-crown-4 reacts exclusively with the heavier alkali-metal chlorides NaCl, KCl and RbCl. Compounds [Na(12-crown-4) 2 ]Cl⋅4 SO 2 (3) and [M(12-crown-4) 2 (SO 2 )]Cl⋅4 SO 2 (4: M=K; 5: M=Rb) all showed S-coordination to the chloride ions through four SO 2 molecules. Compounds 4 and 5 additionally exhibit the first crystallographically confirmed non-bridging O,O'-coordination mode of SO 2 . Unexpectedly, the disila-crown ether supports the dissolution of RbCl and CsCl in the solvent and gives the homoleptic SO 2 -solvated alkali-metal chlorides [MCl⋅3 SO 2 ] (6: M=Rb; 7: M=Cs), which incorporate bridging μ-O,O'-coordinating moieties and the unprecedented side-on O,O'-coordination mode. All compounds were characterised by single-crystal X-ray diffraction. The crown ether complexes were additionally studied by using NMR spectroscopy, and the presence of SO 2 at ambient temperature was revealed by IR spectroscopy of the neat compounds. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

21 CFR 872.3770 - Temporary crown and bridge resin.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Temporary crown and bridge resin. 872.3770 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3770 Temporary crown and bridge resin. (a) Identification. A temporary crown and bridge resin is a device composed of a material, such as...

Two new species of gall midges (Diptera, Cecidomyiidae) associated with Erythroxylum ovalifolium Peyr. (Erythroxylaceae) from the Barra de Maricá restinga, Maricá, Rio de Janeiro, Brazil.

Science.gov (United States)

Maia, V C; Fernandes, S P C

2011-05-01

Two new species of gall midges (Diptera, Cecidomyiidae) Dasineura ovalifoliae and Clinodiplosis maricaensis are described based on material from the Barra de Maricá restinga, Maricá, Rio de Janeiro, Brazil. Both species are associated with Erythroxylum ovalifolium Peyr. (Erythroxylaceae). The former is the gall inducer and the latter an inquiline.

Randomized, Controlled Clinical Trial of Bilayer Ceramic and Metal-Ceramic Crown Performance

Science.gov (United States)

Esquivel-Upshaw, Josephine; Rose, William; Oliveira, Erica; Yang, Mark; Clark, Arthur E.; Anusavice, Kenneth

2013-01-01

Purpose Analyzing the clinical performance of restorative materials is important, as there is an expectation that these materials and procedures will restore teeth and do no harm. The objective of this research study was to characterize the clinical performance of metal-ceramic crowns, core ceramic crowns, and core ceramic/veneer ceramic crowns based on 11 clinical criteria. Materials and Methods An IRB-approved, randomized, controlled clinical trial was conducted as a single-blind pilot study. The following three types of full crowns were fabricated: (1) metal-ceramic crown (MC) made from a Pd-Au-Ag-Sn-In alloy (Argedent 62) and a glass-ceramic veneer (IPS d.SIGN veneer); (2) non-veneered (glazed) lithium disilicate glass-ceramic crown (LDC) (IPS e.max Press core and e.max Ceram Glaze); and (3) veneered lithia disilicate glass-ceramic crown (LDC/V) with glass-ceramic veneer (IPS Empress 2 core and IPS Eris). Single-unit crowns were randomly assigned. Patients were recalled for each of 3 years and were evaluated by two calibrated clinicians. Thirty-six crowns were placed in 31 patients. A total of 12 crowns of each of the three crown types were studied. Eleven criteria were evaluated: tissue health, marginal integrity, secondary caries, proximal contact, anatomic contour, occlusion, surface texture, cracks/chips (fractures), color match, tooth sensitivity, and wear (of crowns and opposing enamel). Numerical rankings ranged from 1 to 4, with 4 being excellent, and 1 indicating a need for immediate replacement. Statistical analysis of the numerical rankings was performed using a Fisher’s exact test. Results There was no statistically significant difference between performance of the core ceramic crowns and the two veneered crowns at year 1 and year 2 (p > 0.05). All crowns were rated either as excellent or good for each of the clinical criteria; however, between years 2 and 3, gradual roughening of the occlusal surface occurred in some of the ceramic-ceramic crowns

IPS Empress crown system: three-year clinical trial results.

Science.gov (United States)

Sorensen, J A; Choi, C; Fanuscu, M I; Mito, W T

1998-02-01

The IPS Empress system is a highly esthetic hot pressed glass ceramic material for fabrication of single crowns. Adhesive cementation of the system not only contributes to the esthetics but is necessary for increased strength of the crown. The purpose of this prospective clinical trials was to evaluate the longevity of 75 adhesively cemented Empress full crowns. An additional aim was to assess the adhesive cementation methodology and potential side effects. At the three-year point, one molar crown fractured for a 1.3 percent failure rate. The resin cementation technique that was employed exhibited a low incidence of microleakage with few clinical side effects. There was a 5.6 percent incidence of post-cementation sensitivity, with all symptoms subsiding by eight weeks. None of the crowns in the study required endodontic therapy.

Induction of leafy galls in Acacia mearnsii De Wild seedlings infected by Rhodococcus fascians

Directory of Open Access Journals (Sweden)

Marguerite Quoirin

2004-07-01

Full Text Available Plantlets of blackwattle (Acacia mearnsii De Wild were inoculated with the bacterium Rhodococcus fascians and cultured in vitro. Leafy galls appeared at the cotyledonary nodes in 75% of the infected plants. The galls were separated from the plants and cultured on a medium containing three-quarters-strength MS salts (Murashige and Skoog, 1962, MS vitamins, 2% sucrose and an antibiotic (cephalothin, supplemented with or without 0.2% activated charcoal. Histological studies conducted from the sixth to the twenty-second day after plant infection revealed the presence of newly formed meristematic centers, first in the axillary region, then on the petioles and lamina of the leaflets around the apical meristem. Approximately 37% of the galls developed one shoot with both concentrations of cephalothin.Plantas recém germinadas de acácia negra (Acacia mearnsii De Wild. foram inoculadas com a bactéria Rhodococcus fascians e cultivadas in vitro. Galhas cobertas por folhas apareceram na altura do nó cotiledonar em 75% das plantas infectadas. As galhas foram separadas das plantas e cultivadas num meio de cultura contendo os sais do meio MS (Murashige e Skoog, 1962 reduzidos a 3/4, as vitaminas do mesmo meio, 2% de sacarose e um antibiótico (cefalotina, adicionado ou não de 0,2% de carvão ativo. Estudos histológicos realizados entre o sexto e o vigésimo segundo dia depois da inoculação, revelaram a presença de centros meristemáticos novos, primeiro nas regiões axilares, em seguida nos pecíolos e limbos dos folíolos ao redor do meristema apical. Aproximadamente 37% das galhas desenvolveram um broto na presença de cefalotina.

Bromine-rich Zinc Bromides: Zn6Br12(18-crown-6)2×(Br2)5, Zn4Br8(18-crown-6)2×(Br2)3, and Zn6Br12(18-crown-6)2×(Br2)2.

Science.gov (United States)

Hausmann, David; Feldmann, Claus

2016-06-20

The bromine-rich zinc bromides Zn6Br12(18-crown-6)2×(Br2)5 (1), Zn4Br8(18-crown-6)2×(Br2)3 (2), and Zn6Br12(18-crown-6)2×(Br2)2 (3) are prepared by reaction of ZnBr2, 18-crown-6, and elemental bromine in the ionic liquid [MeBu3N][N(Tf)2] (N(Tf)2 = bis(trifluoromethylsulfonyl)amide). Zn6Br12(18-crown-6)2×(Br2)5 (1) is formed instantaneously by the reaction. Even at room temperature, compound 1 releases bromine, which was confirmed by thermogravimetry (TG) and mass spectrometry (MS). The release of Br2 can also be directly followed by the color and density of the title compounds. With controlled conditions (2 weeks, 25 °C, absence of excess Br2) Zn6Br12(18-crown-6)2×(Br2)5 (1) slowly releases bromine with conconcurrent generation of Zn4Br8(18-crown-6)2×(Br2)3 (2) (in ionic liquid) and Zn6Br12(18-crown-6)2×(Br2)2 (3) (in inert oil). All bromine-rich zinc bromides contain voluminous uncharged (e.g., Zn3Br6(18-crown-6), Zn2Br4(18-crown-6)) or ionic (e.g., [Zn2Br3(18-crown-6)](+), [(Zn2Br6)×(Br2)2](2-)) building units with dibromine molecules between the Zn oligomers and partially interconnecting the Zn-containing building units. Due to the structural similarity, the bromine release is possible via crystal-to-crystal transformation with retention of the crystal shape.

Selective crystallization of cations with crown ethers

International Nuclear Information System (INIS)

Heffels, Dennis Egidius

2014-01-01

The aim of this work was to study the selectivity and preferences of the incorporation of differently sized cations in the cavities of various crown ethers and the characterization of the resulting compounds. The coordination preferences of crown ethers with different cavities have long been known, and the impact of other effects on the structure formation have increasingly become the focus of attention. In this work a comparative overview of the coordination preferences depending on various factors was undertaken. The focus was mainly on the variation of the cavity of the crown ether in the presence of differently sized cations. In addition, the effects of the solvent and differently coordinating anions have been investigated. Within the framework of this work, basic coordination preferences could be detected with rare earth nitrates, which are affected particularly by the choice of the solvent. The formation of different types of structures could be controlled by varying the conditions such that the incorporation of the cation in the cavity of the crown ether was influenced and the formation of a particular type of structure can be influenced partly by the choice of solvent. In this case no direct preferences for the incorporation into the cavity of the crown ether in relation to the cation size were observed for rare earth cations. However, the coordination of the crown ether leads in each case - for lanthanides - to rather high coordination numbers. A total of five new rare earth complexes and two structural variants could be observed with crown ethers. In the study of the selectivity of the incorporation into the cavity, known structures were also reproduced and further structures were characterized but the crystal structures not entirely solved. With the use of monovalent cations such as potassium, lithium or silver a total of nine new compounds could be synthesized, while no clear preferences for the incorporation of certain cations were detected. The

Wind Tunnel Experiments to Study Chaparral Crown Fires.

Science.gov (United States)

Cobian-Iñiguez, Jeanette; Aminfar, AmirHessam; Chong, Joey; Burke, Gloria; Zuniga, Albertina; Weise, David R; Princevac, Marko

2017-11-14

The present protocol presents a laboratory technique designed to study chaparral crown fire ignition and spread. Experiments were conducted in a low velocity fire wind tunnel where two distinct layers of fuel were constructed to represent surface and crown fuels in chaparral. Chamise, a common chaparral shrub, comprised the live crown layer. The dead fuel surface layer was constructed with excelsior (shredded wood). We developed a methodology to measure mass loss, temperature, and flame height for both fuel layers. Thermocouples placed in each layer estimated temperature. A video camera captured the visible flame. Post-processing of digital imagery yielded flame characteristics including height and flame tilt. A custom crown mass loss instrument developed in-house measured the evolution of the mass of the crown layer during the burn. Mass loss and temperature trends obtained using the technique matched theory and other empirical studies. In this study, we present detailed experimental procedures and information about the instrumentation used. The representative results for the fuel mass loss rate and temperature filed within the fuel bed are also included and discussed.

Crown condition dynamics of oak in southern Sweden 1988-1999.

Science.gov (United States)

Drobyshev, Igor; Anderson, Stefan; Sonesson, Kerstin

2007-11-01

Crown defoliation of oak (Quercus robur and Q. petraea) was analysed in 808 trees during three forest condition surveys (1988, 1993, and 1999) in the southern Sweden. From 1988 to 1999 crown defoliation increased by more than 20%. Changes in crown defoliation were related to the pH in the upper 20-30 cm of the mineral soils, which was closely connected to other measures of soil fertility (cation exchange capacity, CEC and C/N ratio). Trees growing on soils with a high pH (> or =4.00, in BaCl2 filtrate), high CEC and low C/N ratio had significantly lower crown defoliation than trees growing on more acid soils (pH trees with respect to crown defoliation, indicating that decline in crown condition was not due to an age-related increase in crown transparency. Considering only trees younger than 100 years, a significant interaction was observed between changes in crown defoliation and soil pH. Trees younger than 100 years old growing on more acidic soils had a greater increase in crown transparency than trees on more basic soils between 1988 and 1999. Trees > or =100 years old had significantly higher defoliation on more acidic than on more basic soils, however defoliation dynamics of these trees over 1988-99 was not related to soil acidity. Two biotic agents (insect and fungal leaf infections) evaluated in this study did not prove to be important drivers of defoliation dynamics.

Descriptive statistics of tree crown condition in the North Central United States

Science.gov (United States)

KaDonna C. Randolph; Randall S. Morin; Jim Steinman

2010-01-01

The U.S. Forest Service Forest Inventory and Analysis (FIA) Program uses visual assessments of tree crown condition to monitor changes and trends in forest health. This report describes four crown condition indicators (crown dieback, crown density, foliage transparency, and sapling crown vigor) measured in Illinois, Indiana, Michigan, Minnesota, Missouri, and Wisconsin...

Two new species of gall midges (Diptera, Cecidomyiidae associated with Erythroxylum ovalifolium Peyr. (Erythroxylaceae from the Barra de Maricá restinga, Maricá, Rio de Janeiro, Brazil

Directory of Open Access Journals (Sweden)

VC Maia

Full Text Available Two new species of gall midges (Diptera, Cecidomyiidae Dasineura ovalifoliae and Clinodiplosis maricaensis are described based on material from the Barra de Maricá restinga, Maricá, Rio de Janeiro, Brazil. Both species are associated with Erythroxylum ovalifolium Peyr. (Erythroxylaceae. The former is the gall inducer and the latter an inquiline.

Descriptive statistics of tree crown condition in the United States Interior West

Science.gov (United States)

KaDonna C. Randolph; Mike T. Thompson

2010-01-01

The U.S. Forest Service Forest Inventory and Analysis (FIA) Program uses visual assessments of tree crown condition to monitor changes and trends in forest health. This report describes four crown condition indicators (crown dieback, crown density, foliage transparency, and sapling crown vigor) measured in Colorado, Idaho, Nevada, Utah, and Wyoming between 1996 and...

Crowns and Crypts

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 6. Crowns and Crypts - A Fascinating Group of Multidentate Macrocyclic Ligands. Debasis Bandyopadhyay. General Article Volume 6 Issue 6 June 2001 pp 71-79. Fulltext. Click here to view fulltext PDF. Permanent link:

In vitro fracture resistance of three commercially available zirconia crowns for primary molars.

Science.gov (United States)

Townsend, Janice A; Knoell, Patrick; Yu, Qingzhao; Zhang, Jian-Feng; Wang, Yapin; Zhu, Han; Beattie, Sean; Xu, Xiaoming

2014-01-01

The purpose of this study was to measure the fracture resistance of primary mandibular first molar zirconia crowns from three different manufacturers-EZ Pedo (EZP), NuSmile (NSZ), and Kinder Krowns (KK)-and compare it with the thickness of the zirconia crowns and the measured fracture resistance of preveneered stainless steel crowns (SSCs). The thickness of 20 zirconia crowns from three manufacturers were measured. The mean force required to fracture the crowns was determined. Preveneered NuSmile (NSW) SSCs were tested as a control. EZP crowns were significantly thicker in three of the six measured locations. The force required to fracture the EZP crown was significantly higher than that required for NSZ and KK. There was a positive correlation between fracture resistance and crown thickness in the mesial, distal, mesioocclusal, and distoocclusal dimensions. None of the zirconia crowns proved to be as resistant to fracture as the preveneered SSCs. Statistically significant differences were found among the forces required to fracture zirconia crowns by three different manufacturers. The increase in force correlated with crown thickness. The forces required to fracture the preveneered stainless steel crowns were greater than the forces required to fracture all manufacturers' zirconia crowns.

[Clinical application of IPS-empress 2 pressable all-ceramic crowns].

Science.gov (United States)

Wang, Ai-jun; He, Xiao-ming; Liu, Li-xia; Zhang, Chao-biao; Zhang, Min; Shen, Bei-yong

2007-02-01

To evaluate the clinical prosthetic effect of IPS-Empress 2 pressahie ceramic crowns. 198 teeth of 70 patients were restored with IPS-Empress 2 pressahie ceramic crowns. The patients were asked to return in one week and every half year. The clinical prosthetic effect was evaluated. Through follow-up of 3-38 months, the veneer porcelain crowns of 3 teeth were broken. 2 crowns fall off due to teeth fracture, gingivitis occurred in 2 teeth, pulpitis or periapical periodontitis occurred in 3 teeth. The shades of 3 crowns were darkening. The prosthetic effect of 185 teeth was satisfied. The rate of satisfaction was 93.4%. IPS-Empress 2 pressable all-ceramic crown has the advantages of aesthetic effect, good hiocompatihility and simple fabrication. But its strength is not enough for posterior teeth and it can not cover the deep color of non-vital teeth and metal materials.

Galling arthropod diversity in adjacent swamp forests and restinga vegetation in Rio Grande do Sul, Brazil.

Science.gov (United States)

Mendonça, Milton De S; Piccardi, Hosana M F; Jahnke, Simone M; Dalbem, Ricardo V

2010-01-01

Galling arthropods create plant structures inside which they find shelter. Factors acting on galler diversity are still being discussed, with this fauna considered more diverse in xeric than mesic environments (higrothermic stress hypothesis, HSH), and also in more plant diverse sites. Here we compare galler abundance (N), equitability (E), species richness (S) and composition between adjacent restinga (xeric) and swamp forests (mesic) in Parque Estadual de Itapeva (29°21' S, 49°45' W), Rio Grande do Sul, southern Brazil. Five trails, two in swamp forest and three in restingas, were sampled four times each (January/December 2005). After an effort of 60h/person, 621 galled plant individuals belonging to 104 gall morphotypes were recorded. This suggests a high galler diversity for the Park, comparable to the richest places known. No differences were found for N, E or S between restingas and swamp forests. However, faunal composition differs significantly between the vegetation types. The dominant (most abundant) species are different in either vegetation type, and are rare or absent on the other vegetation type. Such species composition analysis is still largely ignored for gallers, and stresses the fact that the HSH cannot explain this pattern, since the latter is based on preferences by the ovipositing galler for xeric sites instead of mesic ones. The two habitats differ in microclimate, but species richness, as would be predicted by the HSH, does not differ. This small scale pattern can perhaps be attributed to biogeographic processes on larger scales, as suggested by the resource synchronisation hypothesis.

Calorimetric study of binding of some disaccharides with crown ethers

Energy Technology Data Exchange (ETDEWEB)

Davydova, Olga I.; Lebedeva, Nataliya Sh.; Parfenyuk, Elena V

2004-11-01

Isothermal titration calorimetry has been applied to the determination of the thermodynamic parameters of binding of {beta}-lactose, {alpha},{alpha}-trehalose and sucrose with 15-crown-5 and 18-crown-6 in water at 298.15 K. The formation of 1:1 molecular associates has been found for the systems studied except 18-crown-6 and {beta}-lactose. The associates are preferentially or completely entropy stabilized. The most stable associate is formed between {alpha},{alpha}-trehalose and 18-crown-6. The obtained values of thermodynamic parameters of binding are discussed from the point of view of solute-solvent interactions as well as conformational and structural peculiarities of the disaccharides (DS) and crown ethers (CE)

Calorimetric study of binding of some disaccharides with crown ethers

International Nuclear Information System (INIS)

Davydova, Olga I.; Lebedeva, Nataliya Sh.; Parfenyuk, Elena V.

2004-01-01

Isothermal titration calorimetry has been applied to the determination of the thermodynamic parameters of binding of β-lactose, α,α-trehalose and sucrose with 15-crown-5 and 18-crown-6 in water at 298.15 K. The formation of 1:1 molecular associates has been found for the systems studied except 18-crown-6 and β-lactose. The associates are preferentially or completely entropy stabilized. The most stable associate is formed between α,α-trehalose and 18-crown-6. The obtained values of thermodynamic parameters of binding are discussed from the point of view of solute-solvent interactions as well as conformational and structural peculiarities of the disaccharides (DS) and crown ethers (CE)

Ceramic molar crown reproducibility by digital workflow manufacturing: An in vitro study.

Science.gov (United States)

Jeong, Ii-Do; Kim, Woong-Chul; Park, Jinyoung; Kim, Chong-Myeong; Kim, Ji-Hwan

2017-08-01

This in vitro study aimed to analyze and compare the reproducibility of zirconia and lithium disilicate crowns manufactured by digital workflow. A typodont model with a prepped upper first molar was set in a phantom head, and a digital impression was obtained with a video intraoral scanner (CEREC Omnicam; Sirona GmbH), from which a single crown was designed and manufactured with CAD/CAM into a zirconia crown and lithium disilicate crown (n=12). Reproducibility of each crown was quantitatively retrieved by superimposing the digitized data of the crown in 3D inspection software, and differences were graphically mapped in color. Areas with large differences were analyzed with digital microscopy. Mean quadratic deviations (RMS) quantitatively obtained from each ceramic group were statistically analyzed with Student's t-test (α=.05). The RMS value of lithium disilicate crown was 29.2 (4.1) µm and 17.6 (5.5) µm on the outer and inner surfaces, respectively, whereas these values were 18.6 (2.0) µm and 20.6 (5.1) µm for the zirconia crown. Reproducibility of zirconia and lithium disilicate crowns had a statistically significant difference only on the outer surface ( P <.001). The outer surface of lithium disilicate crown showed over-contouring on the buccal surface and under-contouring on the inner occlusal surface. The outer surface of zirconia crown showed both over- and under-contouring on the buccal surface, and the inner surface showed under-contouring in the marginal areas. Restoration manufacturing by digital workflow will enhance the reproducibility of zirconia single crowns more than that of lithium disilicate single crowns.

[Fractographic analysis of clinically failed anterior all ceramic crowns].

Science.gov (United States)

DU, Qian; Zhou, Min-bo; Zhang, Xin-ping; Zhao, Ke

2012-04-01

To identify the site of crack initiation and propagation path of clinically failed all ceramic crowns by fractographic analysis. Three clinically failed anterior IPS Empress II crowns and two anterior In-Ceram alumina crowns were retrieved. Fracture surfaces were examined using both optical stereo and scanning electron microscopy. Fractographic theory and fracture mechanics principles were applied to disclose the damage characteristics and fracture mode. All the crowns failed by cohesive failure within the veneer on the labial surface. Critical crack originated at the incisal contact area and propagated gingivally. Porosity was found within the veneer because of slurry preparation and the sintering of veneer powder. Cohesive failure within the veneer is the main failure mode of all ceramic crown. Veneer becomes vulnerable when flaws are present. To reduce the chances of chipping, multi-point occlusal contacts are recommended, and layering and sintering technique of veneering layer should also be improved.

Mesiodistal Crown Dimensions of Permanent Teeth in Bangladeshi Population

Directory of Open Access Journals (Sweden)

Saeed Hossain Khan

2011-09-01

Full Text Available Background: Variation in tooth size is influenced by genetic and environmental factors. Several studies have reported tooth size variation between and within different racial groups. In order to improve the quality of dental care available, there is a great need for data on the mesiodistal crown dimensions of the individual teeth of Bangladeshi population. Objectives: To find nominative data on the mesiodistal crown dimensions of permanent teeth in Bangladeshi population and to compare the findings with those reported in other populations. Methods: This observational study was done from January, 2008 to June, 2010 in the Department of Orthodontics, Faculty of Dentistry, Bangabandhu Sheikh Mujib Medical University. A total of 244 Bangladeshi subjects (77 males and 167 females, aged 7 – 36 years (mean 18.3 years with no age limit who attended at the above mentioned place for treatment were included in the study. Main outcome measure was mesiodistal crown dimension of each tooth class of permanent dentition. Mesiodistal crown dimensions were measured from dental casts of the permanent teeth. Results: Males had significantly larger teeth than females for maxillary central incisors (p < 0.05 and for the mandibular second premolars (p < 0.001. In both sexes, the maxillary lateral incisors showed the greatest variability [coefficient of variation (CV 10.7%] and the maxillary canines the least (CV 6.9% in mesiodistal crown dimension. Mandibular canines displayed greater sexual dimorphism in mesiodistal crown size than in any other tooth classes. Comparisons of the mesiodistal crown dimensions between population groups showed that Bangladeshis have tooth sizes close to those of North Indians, Icelanders and Jordanians but larger than those of North American Whites. Conclusions: From this study, a standard for the mesiodistal crown dimensions of permanent dentition of Bangladeshi males and females are obtained. Key Words: Crown dimension; Mesio

In vitro evaluation of the marginal integrity of CAD/CAM interim crowns.

Science.gov (United States)

Kelvin Khng, Kwang Yong; Ettinger, Ronald L; Armstrong, Steven R; Lindquist, Terry; Gratton, David G; Qian, Fang

2016-05-01

The accuracy of interim crowns made with computer-aided design and computer-aided manufacturing (CAD/CAM) systems has not been well investigated. The purpose of this in vitro study was to evaluate the marginal integrity of interim crowns made by CAD/CAM compared with that of conventional polymethylmethacrylate (PMMA) crowns. A dentoform mandibular left second premolar was prepared for a ceramic crown and scanned for the fabrication of 60 stereolithical resin dies, half of which were scanned to fabricate 15 Telio CAD-CEREC and 15 Paradigm MZ100-E4D-E4D crowns. Fifteen Caulk and 15 Jet interim crowns were made on the remaining resin dies. All crowns were cemented with Tempgrip under a 17.8-N load, thermocycled for 1000 cycles, placed in 0.5% acid fuschin for 24 hours, and embedded in epoxy resin before sectioning from the mid-buccal to mid-lingual surface. The marginal discrepancy was measured using a traveling microscope, and dye penetration was measured as a percentage of the overall length under the crown. The mean vertical marginal discrepancy of the conventionally made interim crowns was greater than for the CAD/CAM crowns (P=.006), while no difference was found for the horizontal component (P=.276). The mean vertical marginal discrepancy at the facial surface of the Caulk crowns was significantly greater than that of the other 3 types of interim crowns (Pmargin, the mean horizontal component of the Telio crowns was significantly larger than that of the other 3 types, with no difference at the lingual margins (P=.150). The mean percentage dye penetration for the Paradigm MZ100-E4D crowns was significantly greater and for Jet crowns significantly smaller than for the other 3 crowns (Pmarginal discrepancies of the Jet interim crowns at the facial surface and with the horizontal marginal discrepancies of the Caulk interim crowns at the lingual surface (Pmarginal discrepancy was found with the interim crowns fabricated by CAD/CAM as compared with PMMA crowns

Susceptibility of Juglans Species andInterspecific Hybrids to Agrobacterium tumefaciens

Science.gov (United States)

James R. McKenna; Lynn Epstein

2003-01-01

Crown gall, caused by the common soil-borne bacterium Agrobacterium tumefaciens, can be an economic problem in walnut nurseries and production orchards in Caliiornia. The principal rootstocks used for commercial walnut production in California are the native Northern California black walnut, Juglans hindsii, and "Paradox,...

Impact of biological amendments on Agrobacterium tumefaciens soil survival

Science.gov (United States)

Paradox, the primary walnut rootstock used in California, is susceptible to Agrobacterium tumefaciens, which causes crown gall. While A. tumefaciens is susceptible to commonly used fumigants such as methyl bromide (MeBr) and Telone-C35 (1,3-dichloropropene and chloropicrin), these fumigants also sig...

Crown ether derivatives of EDTA: Pt. 6

International Nuclear Information System (INIS)

Liu Zhongqun; Qin Shengying; Chen Shaojin; Tan Lin

1988-01-01

EDTA-diaminodibenzo-18-crown-6 (cis- and trans-) condensation polymer is a new compound of crown ether derivatives of EDTA. In this paper the adsorption behaviors of U(IV) and U(VI) on this polymer from chloride solutions and effects of hydrochloric acid concentrations, salting-out agents and organic solvents on distribution coefficient (K d ) of uranium are investigated. Adsorption mechanism of uranyl ion (UO 2 2+ ) on this polymer was studied with IR spectra and by means of the adsorption behaviors of compounds of similar structure. Experimental results show that both polyether section and carboxyl groups in EDTA-diaminodibenzo-18-crown-6 take part in complexation with uranyl ion and synergistic effect appeared

Vicarious visualization of gall bladder on 99mTc ethylene dicysteine renal dynamic study

International Nuclear Information System (INIS)

Arora, Geetanjali; Damle, Nishikant A.; Tripathi, Madhavi; Bal, Chandrasekhar; Praveen Kumar

2012-01-01

Though the hepatobiliary excretion of Technetium-99m ethylene dicysteine ( 99m Tc-EC) is very low and usually does not effect image interpretation on routine posterior imaging, the possibility of visualization of the gall bladder should be kept in mind while reporting the 99m Tc-EC scan especially, when anterior imaging is performed as in renal transplant patients. (author)

Optical effects of different colors of artificial gingiva on ceramic crowns.

Science.gov (United States)

Wang, Jian; Lin, Jin; Gil, Mindy; Da Silva, John D; Wright, Robert; Ishikawa-Nagai, Shigemi

2013-08-01

The interaction between gingival color and the shade of ceramic restorations has never been fully studied. The purpose of this study is to investigate the optical effects of altering artificial gingival color on the ceramic crown shade in the cervical area. Thirty-one all-ceramic crowns of different shades were used in this study with six different artificial gingival colors. Using a spectrophotometer (Crystaleye(®) Olympus, Japan), we measured the shade of crowns in cervical areas with each of six different artificial gingiva. The crown color measured in the presence of pink artificial gingiva (control) was compared with the crown color with five other artificial gingiva. color difference values ΔE* were calculated and compared between the control group and test groups and the correlation of the artificial gingival color with the crown color was also assessed. Significant differences were found in the mean L* and a* values of all-ceramic crowns at the cervical regions in all six gingival color groups (pcolors of artificial gingiva generated clinically detectable shade differences in the cervical region of ceramic crowns. Copyright © 2013. Published by Elsevier Ltd.

Clinical Performance of Pedo Jacket Crowns in Maxillary Anterior Primary Teeth.

Science.gov (United States)

Castro, Aimee; Badr, Sherine B Y; El-Badrawy, Wafa; Kulkarni, Gajanan

2016-09-15

To assess the clinical performance of Pedo Jacket crowns for restoration of carious primary anterior teeth. A total of 129 carious primary incisors and canines of 48 children younger than 71 months of age- were restored with Pedo Jacket crowns and resin-modified glass ionomer cementation. They were assessed for: ease of use; presence of recurrent decay; wear; partial or complete loss of the crown; color stability; gingival health; and overall clinical success over a 12-month follow-up. The patient's behavior at the restorative appointment during crown placement was also assessed. An overall clinical success of 89.5 percent of the teeth in 87.3 percent of the children was seen one year later. The crowns were easy to use, even in uncooperative children. The color stability, wear, plaque accumulation, and gingival health were acceptable. Discoloration, wear, or complete loss of the crown were found in 13.1 percent, 5.4 percent, and 7.6 percent of children, respectively. Although not statistically significant, failures were associated with poor patient cooperation at the time of crown placement, poor oral hygiene, or operator error. Pedo Jacket crowns are a viable treatment alternative for carious maxillary primary anterior teeth.

Egg parasitoids (Hymenoptera: Mymaridae and Trichogrammatidae) of the gall-making leafhopper Scenergates viridis (Hemiptera: Cicadellidae) from Uzbekistan, with taxonomic notes on the Palaearctic species of Aphelinoidea.

Science.gov (United States)

Rakitov, Roman; Triapitsyn, Serguei V

2013-01-01

A new species of the Aphelinoidea Girault (Hymenoptera: Trichogrammatidae), A. (Aphelinoidea) sariq Triapitsyn & Rakitov sp. n., is described from Uzbekistan. Both sexes were reared from eggs of the only known truly gall-making leafhopper, Scenergates viridis (Vilbaste), laid inside its galls on camelthorn, Alhagi maurorum Medikus; additional females were found dead inside the galls. Aphelinoidea sariq is the only known species of the nominate subgenus of Aphelinoidea whose body color is predominantly yellow. Taxonomic notes on other Palaearctic species of Aphelinoidea are provided; A. scythica Fursov, syn. n. is synonymized underA. (Aphelinoidea) turanica S. Trjapitzin. Another trichogrammatid, Par-acentrobia (Paracentrobia) sp., was reared from eggs of S. viridis in much smaller numbers. Also described from the same locality and host is Gonatocerus (Lymaenon) mitjaevi Triapitsyn & Rakitov sp. n. (Hymenoptera: Mymaridae).

Chaves para classificação de galhas de Cecidomyiidae (Diptera em Myrtaceae na Restinga da Barra de Maricá, Rio de Janeiro Keys to separation of Cecidomyiidae (Diptera galls on Myrtaceae at Restinga da Barra de Maricá, Rio de Janeiro

Directory of Open Access Journals (Sweden)

Valéria Cid Maia

1995-01-01

Full Text Available Keys to Cecidomyiidae galls occuring on Myrtaceae by genus of the host plant, in alphabetical order, are presented. Data on gall makers, predators and inquilinous species are given, as well as illustrations of the galls.

Provisional crown failures in dental school predoctoral clinics.

Science.gov (United States)

Hyde, Jeffrey D; Bader, James A; Shugars, Daniel A

2007-11-01

Following a preliminary study indicating that at least 10 percent of single-unit crown temporary restorations failed in patients who received treatment by predoctoral students, a comprehensive examination of provisional crown failure was initiated to identify strategies to reduce the failure rate. For all provisionalized, natural tooth, single-unit crown preparations in University of North Carolina School of Dentistry predoctoral clinics for one year (N=1008), we noted tooth type, type of crown, student level, faculty coverage experience, treatment clinic, temporary material and luting agent, and retreatment (failure) of the provisional restoration. For failures, we also noted the stage of crown preparation at failure and the time since initial placement of the temporary. We analyzed these data using simple cross-tabs and logistic regression on need for retreatment (alpha =0.05). The failure rate was 18.75 percent (N=189). The median time to failure was twelve days; the 25(th) and 75(th) percentiles were six and twenty-six days. Significant risk factors, in order of odds ratio estimates, were molar tooth, second- or third-year student, and inexperienced faculty. Most provisional failures occurred during the final preparation phase of treatment. Provisional restoration failure is more frequent than was initially suspected from preliminary studies. Strategies for institutional intervention to reduce provisional restoration failure include greater attention to evaluating provisional crowns placed by inexperienced students (sophomores and juniors) and placing more emphasis on the retentiveness of provisional restorations reused following the final impression. Review of provisional evaluation procedures is also indicated for faculty who do not routinely supervise these procedures.

4-Bromoanilinium perchlorate 18-crown-6 clathrate

Directory of Open Access Journals (Sweden)

Min Guo

2010-11-01

Full Text Available The reaction of 4-bromoaniline, 18-crown-6, and perchloric acid in methanol yields the title compound, C6H7BrN+·ClO4−·C12H24O6, in which the protonated –NH3+ group forms three bifurcated N—H...O hydrogen bonds to the O atoms of the crown ether.

A finite element analysis of novel vented dental abutment geometries for cement-retained crown restorations.

Science.gov (United States)

Rodriguez, Lucas C; Saba, Juliana N; Meyer, Clark A; Chung, Kwok-Hung; Wadhwani, Chandur; Rodrigues, Danieli C

2016-11-01

Recent literature indicates that the long-term success of dental implants is, in part, attributed to how dental crowns are attached to their associated implants. The commonly utilized method for crown attachment - cementation, has been criticized because of recent links between residual cement and peri-implant disease. Residual cement extrusion from crown-abutment margins post-crown seating is a growing concern. This study aimed at (1) identifying key abutment features, which would improve dental cement flow characteristics, and (2) understanding how these features would impact the mechanical stability of the abutment under functional loads. Computational fluid dynamic modeling was used to evaluate cement flow in novel abutment geometries. These models were then evaluated using 3D-printed surrogate models. Finite element analysis also provided an understanding of how the mechanical stability of these abutments was altered after key features were incorporated into the geometry. The findings demonstrated that the key features involved in improved venting of the abutment during crown seating were (1) addition of vents, (2) diameter of the vents, (3) location of the vents, (4) addition of a plastic screw insert, and (5) thickness of the abutment wall. This study culminated in a novel design for a vented abutment consisting of 8 vents located radially around the abutment neck-margin plus a plastic insert to guide the cement during seating and provide retrievability to the abutment system.Venting of the dental abutment has been shown to decrease the risk of undetected residual dental cement post-cement-retained crown seating. This article will utilize a finite element analysis approach toward optimizing dental abutment designs for improved dental cement venting. Features investigated include (1) addition of vents, (2) diameter of vents, (3) location of vents, (4) addition of plastic screw insert, and (5) thickness of abutment wall.

Consequences of crown shortening canine teeth in Greenland sled dogs

DEFF Research Database (Denmark)

Kortegaard, H E; Anthony Knudsen, T; Dahl, S

2015-01-01

OBJECTIVES: To evaluate the consequences of crown shortening, focusing on the prevalence of pulp exposure and periapical pathology in Greenland sled dogs that had had their canine crowns shortened at an early age. METHODS: Five cadaver heads and 54 sled dogs underwent an oral examination for dental...... fractures and pulp exposure of canines. All canines were radiographed and evaluated for periapical pathology. RESULTS: The prevalence of canine pulp exposure in 12 (5 heads and 7 dogs) crown shortened dogs was 91 · 7%, and 21 · 3% in 47 not-crown shortened dogs. A significant (P pulp...... exposure of the canines in the crown shortened group compared to the not-crown shortened group was seen with a relative risk of 4 · 3 on a dog basis and a relative risk of 12 · 2 on a tooth basis. In dogs with pulp exposure of canines (n = 51) the prevalence of periapical pathology was 82 · 4%, but only 0...

Insetos galhadores associados a duas espécies de plantas invasoras de áreas urbanas e peri-urbanas Galling insects associated with two species of ruderal plants in urban and peri urban areas

Directory of Open Access Journals (Sweden)

Genimar R. Julião

2005-03-01

que áreas verdes em espaços urbanos são de fundamental importância na manutenção da diversidade de insetos.Insects have been considered as important bioindicators of environmental changes and habitat quality. In spite of its sessile habit, easy localization, abundance and host specificity, insects that induce galls have not been utilized in studies of this nature. It was investigated the suitability of gall-inducing insects associated to two ruderal host plant species (Baccharis dracunculifolia and Vernonia polyanthes: Asteraceae as bioindicators of habitat quality. The following questions were addressed: (i is gall-inducing insect diversity influenced by different types of land use?; (ii are the responses of galling insect communities different between host plants?; (iii how does the biotic and physical features of the biotope influence the gall-inducing insect diversity? It was found 6,226 galls, belonging to six galling insect species on V. polyanthes and 11 galling species on B. dracunculifolia. No difference was found in galling species richness among land use types. Nevertheless, gall-forming insect abundance was statistically different among the biotopes studied. Insect galls were more numerous in biotopes with lower urbanization levels. Gall abundance showed a strong and positive relationship with the percentage of vegetal cover. Gall-forming insect communities on both host species showed differential responses to the different land use types. The results suggest that three factors may be involved with galling insect diversity in urban areas: (i habitat structure in the biotope; (ii resource abundance (host plant abundance and distribution; and (iii frequency and intensity of management in reserves, parks, city squares, wastelands found at a given urban area.

New distribution records of the gall crab Opecarcinus cathyae van der Meij, 2014 (Decapoda: Brachyura: Cryptochiridae) from the Red Sea, Maldives and Japan

KAUST Repository

Meij, Sancia E. T.

2016-11-12

The gall crab Opecarcinus cathyae van der Meij, 2014 has been reported from various localities in Indonesia and Malaysia. Recent surveys in the Red Sea, Maldives and Japan yielded additional specimens of O. cathyae, considerably expanding the known distribution range of this species to the east and west. The identity of O. cathyae was confirmed based on COI sequence data, revealing identical haplotypes for the Red Sea, Maldivian and Japanese material and three haplotypes in the Indonesian material. Opecarcinus cathyae has one of the widest known recorded distribution ranges for all gall crab species.

New distribution records of the gall crab Opecarcinus cathyae van der Meij, 2014 (Decapoda: Brachyura: Cryptochiridae) from the Red Sea, Maldives and Japan

KAUST Repository

Meij, Sancia E. T.; Benzoni, Francesca; Berumen, Michael L.; Naruse, Tohru

2016-01-01

The gall crab Opecarcinus cathyae van der Meij, 2014 has been reported from various localities in Indonesia and Malaysia. Recent surveys in the Red Sea, Maldives and Japan yielded additional specimens of O. cathyae, considerably expanding the known distribution range of this species to the east and west. The identity of O. cathyae was confirmed based on COI sequence data, revealing identical haplotypes for the Red Sea, Maldivian and Japanese material and three haplotypes in the Indonesian material. Opecarcinus cathyae has one of the widest known recorded distribution ranges for all gall crab species.

Plant-inducible virulence promoter of the Agrobacterium tumefaciens Ti plasmid

NARCIS (Netherlands)

Okker, Robert J.H.; Spaink, Herman; Hille, Jacques; Brussel, Ton A.N. van; Lugtenberg, Ben; Schilperoort, Rob A.

1984-01-01

Agrobacterium tumefaciens is the causative agent of crown gall, a plant tumour that can arise on most species of dicotyledonous plants. The tumour-inducing capacity of the bacterium requires the presence of a large plasmid, designated the Ti plasmid, which itself contains two regions essential for

Incidence of Agrobacterium tumefaciens biovar 1 in and on ‘Paradox’ (Juglans hindsii x Juglans regia) walnut seed collected from commercial nurseries

Science.gov (United States)

The walnut rootstock Paradox (Juglans hindsii (Jeps) Rehder x J. regia L.) is susceptible to Agrobacterium tumefaciens (7) which often results in a high incidence of crown gall in nursery or walnut production orchards. Though A. tumefaciens is susceptible to the commonly used preplant soil fumigant...

Evaluations and modifications of semi-selective media for improved isolation of Agrobacterium tumefaciens biovar 1 from cultivated walnut

Science.gov (United States)

Agrobacterium tumefaciens, the causal agent of crown gall of walnut, is an aerobic, Gram negative bacterium belonging to the family Rhizobiaceae. Like many in this group, A. tumefaciens is a common inhabitant of soil and plant host tissue. Isolation from these complex environments is difficult even ...

Crown and crown-root fractures: an evaluation of the treatment plans for management proposed by 154 specialists in restorative dentistry.

Science.gov (United States)

de Castro, Mara Antonio Monteiro; Poi, Wilson Roberto; de Castro, José Carlos Monteiro; Panzarini, Sônia Regina; Sonoda, Celso Koogi; Trevisan, Carolina Lunardelli; Luvizuto, Eloá Rodrigues

2010-06-01

Traumatic tooth injuries involve function and aesthetics and cause damage that range from minimal enamel loss to complex fractures involving the pulp tissue and even loss of the tooth crown. Technical knowledge and clinical experience are essential to establish an accurate diagnosis and provide a rational treatment. The purpose of this study was to evaluate the knowledge of Restorative Dentistry specialists about the management of crown and crown-root fractures based on treatment plans proposed by these professionals for these cases. A descriptive questionnaire was mailed to 245 Restorative Dentistry specialists with questions referring to their professional profile and the treatment plans they would propose for the management of crown and crow-root fractures resulting from dental trauma. One hundred and fifty-four questionnaires were returned properly filled. The data were subjected to descriptive statistics and the chi-square test was used to determine the frequency and the level of the significance among the variables. The analysis of data showed that in spite of having a specialist title, all interviewees had great difficulty in planning the treatments. As much as 42.8% of the participants were unable to treat all types of dental trauma. Complicated and uncomplicated crown-root fractures posed the greatest difficulties for the dentists to establish adequate treatment plans because these fractures require multidisciplinary knowledge and approach for a correct case planning and prognosis.

Periodontal response to all-ceramic crowns (IPS Empress) in general practice.

Science.gov (United States)

Al-Wahadni, A M; Mansour, Y; Khader, Y

2006-02-01

The purpose of this study was to investigate the periodontal response to the presence of all-ceramic crowns (IPS Empress) in general practice patients. The convenience sample included 82 IPS Empress crowns placed in 64 patients. These crowns had been in place for an average of 16.27 (SD 9.26) months and ranged from 6.2 to 48.87 months at the time of clinical examination. Periodontal health status (as determined by dental plaque, gingival health status, periodontal pockets) was assessed around all crowned teeth and around matched contralateral teeth by one calibrated examiner. Periodontal indices utilized included the Plaque Index (PI), Gingival Index (GI) and pocket depth (PD) with calibrated probes graduated in millimetres. Plaque, gingival and PD values for crowned teeth were compared with those for control teeth using Wilcoxon signed-rank test for each clinical parameters. Chi-square was used to test the significance of the difference in their distribution between crowns and control teeth. Statistically, PI (0.35), GI (0.41) and mean PD scores (1.42) of IPS Empress crowned teeth compared less favourably with scores of the control teeth (0.27, 0.23 and 0.86 respectively). Teeth with IPS Empress crowns had poorer periodontal health and more clinically evident plaque than uncrowned teeth.

Biliary peritonitis due to gall bladder perforation after percutaneous nephrolithotomy

Directory of Open Access Journals (Sweden)

Nikhil Ranjan

2015-01-01

Full Text Available A 19-year-old male patient underwent right percutaneous nephrolithotomy (PNL for right renal 1.5 × 1.5 cm lower pole stone. The procedure was completed uneventfully with complete stone clearance. The patient developed peritonitis and shock 48 h after the procedure. Exploratory laparotomy revealed a large amount of bile in the abdomen along with three small perforations in the gall bladder (GB and one perforation in the caudate lobe of the liver. Retrograde cholecystectomy was performed but the patient did not recover and expired post-operatively. This case exemplifies the high mortality of GB perforation after PNL and the lack of early clinical signs.

Gallé, une vie au tournant du siècle.

Directory of Open Access Journals (Sweden)

Isabelle Debilly

2004-05-01

Full Text Available La collection Découvertes de Gallimard propose un nouveau volume dédié à Émile Gallé, le magicien du verre . Il s’agit là déjà, du 446 e numéro de cette collection destinée à l’origine aux adolescents. Ce principe a été en grande partie abandonné, même si l’on trouve encore les volumes de cette collection dans les rayons « jeunesse » de certaines librairies. Le grand public a depuis longtemps plébiscité ces ouvrages qui présentent une riche iconographie, ...

Differential roles of glucosinolates and camalexin at different stages of Agrobacterium-mediated transformation.

Science.gov (United States)

Shih, Po-Yuan; Chou, Shu-Jen; Müller, Caroline; Halkier, Barbara Ann; Deeken, Rosalia; Lai, Erh-Min

2018-03-02

Agrobacterium tumefaciens is the causal agent of crown gall disease in a wide range of plants via a unique interkingdom DNA transfer from bacterial cells into the plant genome. Agrobacterium tumefaciens is capable of transferring its T-DNA into different plant parts at different developmental stages for transient and stable transformation. However, the plant genes and mechanisms involved in these transformation processes are not well understood. We used Arabidopsis thaliana Col-0 seedlings to reveal the gene expression profiles at early time points during Agrobacterium infection. Common and differentially expressed genes were found in shoots and roots. A gene ontology analysis showed that the glucosinolate (GS) biosynthesis pathway was an enriched common response. Strikingly, several genes involved in indole glucosinolate (iGS) modification and the camalexin biosynthesis pathway were up-regulated, whereas genes in aliphatic glucosinolate (aGS) biosynthesis were generally down-regulated, on Agrobacterium infection. Thus, we evaluated the impacts of GSs and camalexin during different stages of Agrobacterium-mediated transformation combining Arabidopsis mutant studies, metabolite profiling and exogenous applications of various GS hydrolysis products or camalexin. The results suggest that the iGS hydrolysis pathway plays an inhibitory role on transformation efficiency in Arabidopsis seedlings at the early infection stage. Later in the Agrobacterium infection process, the accumulation of camalexin is a key factor inhibiting tumour development on Arabidopsis inflorescence stalks. In conclusion, this study reveals the differential roles of GSs and camalexin at different stages of Agrobacterium-mediated transformation and provides new insights into crown gall disease control and improvement of plant transformation. © 2018 THE AUTHORS. MOLECULAR PLANT PATHOLOGY PUBLISHED BY BRITISH SOCIETY FOR PLANT PATHOLOGY AND JOHN WILEY & SONS LTD.

Asymptomatic ''crowned dens'' calcification in CT images for the craniovertebral junction

International Nuclear Information System (INIS)

Kubota, Gen; Mori, Masataka; Fukushima, Tatsuro

2007-01-01

Calcification around the odontoid process suggests 'crowned dens' syndrome, when accompanied with acute occipital headache or neck pain and with inflammatory signs. We retrospectively searched for calcification around the odontoid process in routine CT images of 282 patients emcompassing the craniovertebral junction, and found 13 (4.6%) had 'crowned dens' calcifications with neither characteristic symptoms nor signs suggestive for crowned dens' syndrome. Females of older ages frequently showed asymptomatic crowned dens' calcifications. (author)

Acetylene–ammonia–18-crown-6 (1/2/1

Directory of Open Access Journals (Sweden)

Tobias Grassl

2012-10-01

Full Text Available The title compound, C2H2·C12H24O6·2NH3, was formed by co-crystallization of 18-crown-6 and acetylene in liquid ammonia. The 18-crown-6 molecule has threefold rotoinversion symmetry. The acteylene molecule lies on the threefold axis and the whole molecule is generated by an inversion center. The two ammonia molecules are also located on the threefold axis and are related by inversion symmetry. In the crystal, the ammonia molecules are located below and above the crown ether plane and are connected by intermolecular N—H...O hydrogen bonds. The acetylene molecules are additionally linked by weak C—H...N interactions into chains that propagate in the direction of the crystallographic c axis. The 18-crown-6 molecule [occupancy ratio 0.830 (4:0.170 (4] is disordered and was refined using a split model.

Evaluation of sampling strategies to estimate crown biomass

Directory of Open Access Journals (Sweden)

Krishna P Poudel

2015-01-01

Full Text Available Background Depending on tree and site characteristics crown biomass accounts for a significant portion of the total aboveground biomass in the tree. Crown biomass estimation is useful for different purposes including evaluating the economic feasibility of crown utilization for energy production or forest products, fuel load assessments and fire management strategies, and wildfire modeling. However, crown biomass is difficult to predict because of the variability within and among species and sites. Thus the allometric equations used for predicting crown biomass should be based on data collected with precise and unbiased sampling strategies. In this study, we evaluate the performance different sampling strategies to estimate crown biomass and to evaluate the effect of sample size in estimating crown biomass. Methods Using data collected from 20 destructively sampled trees, we evaluated 11 different sampling strategies using six evaluation statistics: bias, relative bias, root mean square error (RMSE, relative RMSE, amount of biomass sampled, and relative biomass sampled. We also evaluated the performance of the selected sampling strategies when different numbers of branches (3, 6, 9, and 12 are selected from each tree. Tree specific log linear model with branch diameter and branch length as covariates was used to obtain individual branch biomass. Results Compared to all other methods stratified sampling with probability proportional to size estimation technique produced better results when three or six branches per tree were sampled. However, the systematic sampling with ratio estimation technique was the best when at least nine branches per tree were sampled. Under the stratified sampling strategy, selecting unequal number of branches per stratum produced approximately similar results to simple random sampling, but it further decreased RMSE when information on branch diameter is used in the design and estimation phases. Conclusions Use of

[Finite element analysis of the maxillary central incisor with crown lengthening surgery and post-core restoration in management of crown-root fracture].

Science.gov (United States)

Zhen, Min; Hu, Wen-jie; Rong, Qi-guo

2015-12-18

To construct the finite element models of maxillary central incisor and the simulations with crown lengthening surgery and post-core restoration in management of different crown-root fracture types, to investigate the stress intensity and distributions of these models mentioned above, and to analyze the indications of crown lengthening from the point of view of mechanics. An extracted maxillary central incisor and alveolar bone plaster model were scanned by Micro-CT and dental impression scanner (3shape D700) respectively. Then the 3D finite element models of the maxillary central incisor and 9 simulations with crown lengthening surgery and post-core restoration were constructed by Mimics 10.0, Geomagic studio 9.0 and ANSYS 14.0 software. The oblique static force (100 N) was applied to the palatal surface (the junctional area of the incisal 1/3 and middle 1/3), at 45 degrees to the longitudinal axis, then the von Mises stress of dentin, periodontal ligament, alveolar bone, post and core, as well as the periodontal ligament area, were calculated. A total of 10 high-precision three-dimensional finite element models of maxillary central incisor were established. The von Mises stress of models: post>dentin>alveolar bone>core>periodontal ligament, and the von Mises stress increased linearly with the augmentation of fracture degree (besides the core). The periodontal ligament area of the crown lengthening was reduced by 12% to 33%. The von Mises stress of periodontal ligament of the B2L2c, B2L3c, B3L1c, B3L2c, B3L3c models exceeded their threshold limit value, respectively. The maxillary central incisors with the labial fracture greater than three-quarter crown length and the palatal fracture deeper than 1 mm below the alveolar crest are not the ideal indications of the crown lengthening surgery.

Fatigue resistance and microleakage of CAD/CAM ceramic and composite molar crowns.

Science.gov (United States)

Kassem, Amr S; Atta, Osama; El-Mowafy, Omar

2012-01-01

The aim of this study was to determine effect of compressive cyclic loading on fatigue resistance and microleakage of monolithic CAD/CAM molar ceramic and composite crowns. Thirty-two extracted molars were prepared to receive CEREC crowns according to manufacturer's guidelines using a special paralleling device (Parallel-A-Prep). Sixteen feldspathic ceramic crowns (VITABLOCS Mark II) (VMII) and 16 resin-composite crowns (Paradigm-MZ100 blocks) (PMZ) were milled using a CEREC-3D machine. Eight crowns of each group were cemented to their respective teeth using self-etching resin cement (Panavia-F-2.0) (PAN), and eight were cemented using self-adhesive resin cement (RelyX-Unicem-Clicker) (RXU). Following storage for 1 week in water, specimens were subjected to uniaxial compressive cyclic loading in an Instron testing machine at 12 Hz for 1,000,000 cycles. Load was applied at the central fossa, and the cycle range was 60-600 N. Specimens were then subjected to microleakage testing. Data were statistically analyzed using factorial ANOVA and Post Hoc (Tukey HSD) tests. All composite crowns survived compressive cyclic loading without fracture, while three ceramic crowns from the subgroup cemented with RXU developed surface cracks at the center of occlusal surfaces, extending laterally. Microleakage scores of ceramic crowns cemented with PAN were significantly lower than those of the other three subgroups (p < 0.05). After 1,000,000 cycles of compressive cyclic loading, PMZ composite molar crowns were more fatigue-resistant than VMII ceramic crowns. Cement type had a significant effect on fatigue resistance of the ceramic crowns but not the composite ones. Microleakage scores of ceramic crowns cemented with PAN were significantly lower than those of the other subgroups (p < 0.05). © 2011 by The American College of Prosthodontists.

30 CFR 250.404 - What are the requirements for the crown block?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What are the requirements for the crown block... General Requirements § 250.404 What are the requirements for the crown block? You must have a crown block safety device that prevents the traveling block from striking the crown block. You must check the device...

Spectrophotometric evaluation of crown fragment a year after ...

African Journals Online (AJOL)

Background: Crown fracture is the most common type of fracture and frequently affects the anterior teeth. Crown fractures have been treated in several ways depending on the location and kind of fracture. This case emphasizes reattachment of fractured fragments using fiber-reinforced post. Also this case report underlines ...

SYNTHESIS OF 4’-ALLYLBENZO-3N-CROWN-N ETHERS AND THEIR MASS SPECTRA COMPARED WITH BENZO-3N-CROWN-N ETHERS

OpenAIRE

Anwar, Chairil

2008-01-01

Synthesis of 4’allylbenzo-3n-crown-n ethers was carried out by reacting demethylated eugenol with α,ω-dichloro-oligoethylene glycols in 1-butanol under basic condition. The mass spectra of 4’allylbenzo-3n-crown-n and benzo-3n-crown-n were investigated by mass spectrometry using electron impact under 70 eV of electron bombardment as ionisation method. The difference between the group of compounds is only the present of allyl moiety as a side chain at the other side of benzene ring. The first g...

Stress distribution difference between Lava Ultimate full crowns and IPS e.max CAD full crowns on a natural tooth and on tooth-shaped implant abutments.

Science.gov (United States)

Krejci, Ivo; Daher, René

2017-04-01

The goal of this short communication is to present finite element analysis comparison of the stress distribution between CAD/CAM full crowns made of Lava Ultimate and of IPS e.max CAD, adhesively luted to natural teeth and to implant abutments with the shape of natural teeth. Six 3D models were prepared using a 3D content-creating software, based on a micro-CT scan of a human mandibular molar. The geometry of the full crown and of the abutment was the same for all models representing Lava Ultimate full crowns (L) and IPS e.max CAD full crowns (E) on three different abutments: prepared natural tooth (n), titanium abutment (t) and zirconia abutment (z). A static load of 400 N was applied on the vestibular and lingual cusps, and fixtures were applied to the base of the models. After running the static linear analysis, the post-processing data we analyzed. The stress values at the interface between the crown and the abutment of the Lt and Lz groups were significantly higher than the stress values at the same interface of all the other models. The high stress concentration in the adhesive at the interface between the crown and the abutment of the Lava Ultimate group on implants might be one of the factors contributing to the reported debondings of crowns.

Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns

Directory of Open Access Journals (Sweden)

Adil Othman ABDULLAH

Full Text Available ABSTRACT Objective This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. Material and Methods An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone “PEEK”, Telio CAD-Temp, and Protemp™4 (control group. The crowns were divided into four groups (n=10, Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. Results The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99 µm, PEEK 46.75 (±8.26 µm, Telio CAD-Temp 56.10 (±5.65 µm, and Protemp™4 193.07(±35.96 µm (P0.05. Conclusions CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns.

Ionic complexation of N 2O 4 by 18-crown-6

Science.gov (United States)

Ricard, S.; Audet, P.; Savoie, R.

1988-08-01

An ionic complex has been obtained from N 2O 4 in the presence of the macrocyclic ether 18-crown-6. This crystalline compound has been shown from its Raman spectrum to have the formula NO +·crown·H(NO 3) 2-, with the nitrosonium ion closely associated with the crown ether rather than with the hydrogen dinitrate accompanying ion. This adduct decomposes readily in moist air to give the known complex (HNO 3·H 2O) 2·crown.

Marginal Assessment of Crowns by the Aid of Parallel Radiography

Directory of Open Access Journals (Sweden)

Farnaz Fattahi

2015-03-01

Full Text Available Introduction: Marginal adaptation is the most critical item in long-term prognosis of single crowns. This study aimed to assess the marginal quality as well asthe discrepancies in marginal integrity of some PFM single crowns of posterior teeth by employing parallel radiography in Shiraz Dental School, Shiraz, Iran. Methods: In this descriptive study, parallel radiographies were taken from 200 fabricated PFM single crowns of posterior teeth after cementation and before discharging the patient. To calculate the magnification of the images, a metallic sphere with the thickness of 4 mm was placed in the direction of the crown margin on the occlusal surface. Thereafter, the horizontal and vertical space between the crown margins, the margin of preparations and also the vertical space between the crown margin and the bone crest were measured by using digital radiological software. Results: Analysis of data by descriptive statistics revealed that 75.5% and 60% of the cases had more than the acceptable space (50µm in the vertical (130±20µm and horizontal (90±15µm dimensions, respectively. Moreover, 85% of patients were found to have either horizontal or vertical gap. In 77% of cases, the margins of crowns invaded the biologic width in the mesial and 70% in distal surfaces. Conclusion: Parallel radiography can be expedient in the stage of framework try-in to yield some important information that cannot be obtained by routine clinical evaluations and may improve the treatment prognosis

Phenological relationships between two insect galls and their host plants: Aspidosperma australe and A. spruceanum (Apocynaceae Relações fenológicas entre duas galhas induzidas por insetos e suas plantas hospedeiras: Aspidosperma australe e A. spruceanum (Apocynaceae

Directory of Open Access Journals (Sweden)

Priscila Tolentino Campos

2010-09-01

Full Text Available Although gall diversity in the Neotropical region is immense, comparative studies on the phenology of host plants and their galls are scarce. Gall systems generally require high levels of phenological synchrony between the associated organisms. The relationships between the phenology of two leaf galls induced by an unidentified Cecidomyiidae in Aspidosperma spruceanum Benth. ex Müell. Arg. and by Pseudophacopteron sp. in A. australe Müell. Arg. were investigated. The investigation was performed on ten individuals per species in 15-day intervals taking into consideration the percentage of galled leaves. In a one-year study, three distinct phenophases for the leaf galls and four phenophases for host plants were observed. The maximum percentage of leaf galls (80% on A. australe occurred just after the peak of leaf sprouting. In A. spruceanum, the percentage of leaf galls was always over 50%, which can be related to continuous leaf production and gall induction in this species. In both species, developing galls were observed over the entire year, indicating multivoltinism. The ability to induce galls at young and mature sites seems to be a good strategy for galling species survivorship.Embora a diversidade de galhas na região neotropical seja grande, poucos são os estudos fenológicos comparando a fenologia das espécies hospedeiras com aquela das galhas. O desenvolvimento de galhas geralmente requer alta sincronia fenológica entre os organismos associados. A relação entre a fenologia de duas galhas foliares induzidas por um Cecidomyiidae e Aspidosperma spruceanum Benth. ex Müell. Arg. e de uma espécie de Pseudophacopteron sp. e A. australe Müell. Arg. foram investigadas. O trabalho foi realizado em dez indivíduos de cada espécie em intervalos quinzenais, levando em consideração a percentagem de folhas galhadas. Durante um ano, foram observadas três fenofases distintas para as galhas foliares e quatro fenofases para a hospedeira. A

Displacement of screw-retained single crowns into implants with conical internal connections.

Science.gov (United States)

Yilmaz, Burak; Seidt, Jeremy D; McGlumphy, Edwin A; Clelland, Nancy L

2013-01-01

Internal conical implant-abutment connections without platforms may lead to axial displacement of crowns during screw tightening. This displacement may affect proximal contacts, incisal edge position, or occlusion. This study aimed to measure the displacement of screw-retained single crowns into an implant in three dimensions during screw tightening by hand or via torque driver. A stereolithic acrylic resin cast was created using computed tomography data from a patient missing the maxillary right central incisor. A 4.0- × 11-mm implant was placed in the edentulous site. Five porcelain-fused-to-metal single crowns were made using "cast-to" abutments. Crowns were tried on the stereolithic model, representing the patient, and hand tightened. The spatial relationship of crowns to the model after hand tightening was determined using three-dimensional digital image correlation (3D DIC), an optical measurement technique. The crowns were then tightened using a torque driver to 20 Ncm and the relative crown positions were again recorded. Testing was repeated three times for each crown, and displacement of the crowns was compared between the hand-tightened and torqued states. Commercial image correlation software was used to analyze the data. Mean vertical and horizontal crown displacement values were calculated after torqueing. The interproximal contacts were evaluated before and after torquing using an 8-μm aluminum foil shim. There were vertical and horizontal differences in crown positions between hand tightening and torqueing. Although these were small in magnitude, detectable displacements occurred in both apical and facial directions. After hand tightening, the 8-μm shim could be dragged without tearing. However, after torque tightening, the interproximal contacts were too tight and the 8-μm shim could not be dragged without tearing. Differences between hand tightening and torque tightening should be taken into consideration during laboratory and clinical

Automatic crown cover mapping to improve forest inventory

Science.gov (United States)

Claude Vidal; Jean-Guy Boureau; Nicolas Robert; Nicolas Py; Josiane Zerubia; Xavier Descombes; Guillaume Perrin

2009-01-01

To automatically analyze near infrared aerial photographs, the French National Institute for Research in Computer Science and Control developed together with the French National Forest Inventory (NFI) a method for automatic crown cover mapping. This method uses a Reverse Jump Monte Carlo Markov Chain algorithm to locate the crowns and describe those using ellipses or...

Tournament ABC analysis of the western Palaearctic population history of an oak gall wasp, Synergus umbraculus.

Science.gov (United States)

Stone, Graham N; White, Sarah C; Csóka, György; Melika, George; Mutun, Serap; Pénzes, Zsolt; Sadeghi, S Ebrahim; Schönrogge, Karsten; Tavakoli, Majid; Nicholls, James A

2017-12-01

Approximate Bayesian computation (ABC) is a powerful and widely used approach in inference of population history. However, the computational effort required to discriminate among alternative historical scenarios often limits the set that is compared to those considered more likely a priori. While often justifiable, this approach will fail to consider unexpected but well-supported population histories. We used a hierarchical tournament approach, in which subsets of scenarios are compared in a first round of ABC analyses and the winners are compared in a second analysis, to reconstruct the population history of an oak gall wasp, Synergus umbraculus (Hymenoptera, Cynipidae) across the Western Palaearctic. We used 4,233 bp of sequence data across seven loci to explore the relationships between four putative Pleistocene refuge populations in Iberia, Italy, the Balkans and Western Asia. We compared support for 148 alternative scenarios in eight pools, each pool comprising all possible rearrangements of four populations over a given topology of relationships, with or without founding of one population by admixture and with or without an unsampled "ghost" population. We found very little support for the directional "out of the east" scenario previously inferred for other gall wasp community members. Instead, the best-supported models identified Iberia as the first-regional population to diverge from the others in the late Pleistocene, followed by divergence between the Balkans and Western Asia, and founding of the Italian population through late Pleistocene admixture from Iberia and the Balkans. We compare these results with what is known for other members of the oak gall community, and consider the strengths and weaknesses of using a tournament approach to explore phylogeographic model space. © 2017 The Authors. Molecular Ecology Published by John Wiley & Sons Ltd.

Biomedical potentials of crown ethers: prospective antitumor agents.

Science.gov (United States)

Kralj, Marijeta; Tusek-Bozić, Ljerka; Frkanec, Leo

2008-10-01

Crown ethers are of enormous interest and importance in chemistry, biochemistry, materials science, catalysis, separation, transport and encapsulated processes, as well as in the design and synthesis of various synthetic systems with specific properties, diverse capabilities, and programmable functions. Classical crown ethers are macrocyclic polyethers that contain 3-20 oxygen atoms separated from each other by two or more carbon atoms. They are exceptionally versatile in selectively binding a range of metal ions and a variety of organic neutral and ionic species. Crown ethers are currently being studied and used in a variety of applications beyond their traditional place in chemistry. This review presents additional applications and the ever-increasing biomedical potentials of these intriguing compounds, with particular emphasis on the prospects of their relevance as anticancer agents. We believe that further research in this direction should be encouraged, as crown compounds could either induce toxicities that are different from those of conventional antitumor drugs, or complement drugs in current use, thereby providing a valuable adjunct to therapy.

Clinical performance of IPS-Empress 2 ceramic crowns inserted by general dental practitioners.

Science.gov (United States)

Mansour, Yasar F; Al-Omiri, Mahmoud K; Khader, Yousef Saleh; Al-Wahadni, Ahed

2008-05-01

The aim of this study was to evaluate the clinical performance of IPS-Empress 2(R) all-ceramic crowns placed by general dental practitioners. Eighty-two IPS-Empress 2 crowns placed in 64 patients (27 females and 37 males) were evaluated. These crowns had been in place for 15.2 to 57.2 months (mean 25.3 months, SD=9.3). Survival analysis was conducted using the Kaplan-Meier method. Of the 82 crowns 93.9% were rated satisfactory. In terms of the integrity of the restorations, fracture was observed in three crowns and two showed a crack upon transillumination. Five crowns were rated unsatisfactory for color match; one for marginal adaptation; and none for discoloration, secondary caries, or sensitivity. IPS-Empress 2(R) is a suitable material to fabricate all-ceramic crowns; when these all-ceramic crowns were inserted by general dental practitioners, they functioned satisfactorily with low failure rates during an observation period ranging between 15.2 to 57.2 months.

Wheat Mds-1 encodes a heat-shock protein and governs susceptibility towards the Hessian fly gall midge

Science.gov (United States)

Plant pests including insects must manipulate plants in order to utilize the nutrition and environment of the host. Here, we show that the heat-shock protein gene Mayetiola destructor susceptibility gene-1 (Mds-1) is a major susceptibility gene in wheat that allows the gall midge M. destructor, com...

The marginal fit of selective laser melting-fabricated metal crowns: an in vitro study.

Science.gov (United States)

Xu, Dan; Xiang, Nan; Wei, Bin

2014-12-01

The selective laser melting technique is attracting interest in prosthetic dentistry. The marginal fit is a key criterion for fixed restorations. The purpose of the study was to evaluate the marginal fit of cast cobalt-chromium alloy crowns versus the fit of selective laser melting-fabricated crowns. The marginal gap widths of 36 single crowns (18 selective laser melting-fabricated cobalt-chromium metal crowns and 18 cobalt-chromium cast crowns) were determined with a silicone replica technique. Each crown specimen was cut into 4 sections, and the marginal gap width of each cross section was evaluated by stereomicroscopy (× 100). The Student t test was used to evaluate whether significant differences occurred in the marginal gap widths between the selective laser melting-fabricated and cast cobalt-chromium metal crowns (α=.05). The mean marginal gap width of the cast crowns (170.19 μm) was significantly wider than that of the selective laser melting-fabricated crowns (102.86 μm). Selective laser melting-fabricate cobalt-chromium dental crowns found improved marginal gap widths compared with traditional cast crowns. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Fracture toughness of zirconia ceramic crowns made by feather-edge tooth preparation design

Directory of Open Access Journals (Sweden)

Mirković Nemanja

2012-01-01

Full Text Available Background/Aim. Fracture toughness determines functional crown strenght and prevents damages on ceramics during mastication. There is a lack of relevant literature data about fracture toughness of crowns made by feather-edge preparation. Mechanical testing of ceramic samples is supposed to show if feather-edge tooth preparation is a successful method for making ceramic crowns without any risk of reduction of their mechanical properties. This research was done to establish effects of feather-edge tooth preparation on fracture toughness of single zirconia ceramic crowns. Methods. The research was performed as an experimental study. Sixty (60 ceramic crowns were made on non-carious extracted human premolars. Thirty (30 crowns were made on the basis of feather-edge preparation (experimental group I. The group II included 30 crowns made on 1 mm rounded shoulder. Crowns fabrication was executed on a copy mill production system “Zirkonzahn” (Zirkonzahn GMBH, Gais, Germany. The spherical compression test was used to determine fracture toughness, using 6 mm diameter ceramic ball. Fracture load for damaging ceramic crown was recorded on a universal testing machine - Zwick, type 1464, with the speed of 0.05 mm/min. Results. The results of this research introduced significant differences between fracture toughness of ceramic samples in every examined group. However, fracture toughness of crowns from both group was above 2 000 N, what was double beyond a recommended value. The mean value of fracture toughness in the feather-edge group was 2 090 N, and in shoulder group it was 2 214 N. Conclusion. This research showed a high fracture toughness of zirconia crowns made on feather-edge preparation. The examined crowns showed a fracture resistance at a sufficient distance in relation to the minimum values of functional loads. Further research of functional loads of these crown is necessary, as well as research of marginal adaptation of cemented crowns and

Online recovery of radiocesium from soil, cellulose and plant samples by supercritical fluid extraction employing crown ethers and calix-crown derivatives as extractants

International Nuclear Information System (INIS)

Kanekar, A.S.; Pathak, P.N.; Mohapatra, P.K.

2014-01-01

Two crown ethers (CEs) viz. dibenzo18crown6, and dibenzo12crown7 and three calix-crown derivatives viz. (octyloxy)calix[4]arene-mono-crown-6 (CMC), calix[4]arene-bis(o-benzocrown-6) (CBC), and calix[4]arene-bis(naphthocrown-6) (CNC) were evaluated for the recovery of 137 Cs from synthetic soil, cellulose (tissue paper), and plant samples by supercritical fluid extraction (SFE) route. CEs showed poor extraction of 137 Cs from soil matrix. SFE experiments using 1 × 10 -3 M solutions of CMC, CBC and CNC in acetonitrile at 3 M HNO 3 as modifiers displayed better extraction of 137 Cs, viz. 21(±2) % (CMC), 16.5(±3) % (CBC), and 4(±1) % (CNC). It was not possible to recover 137 Cs quantitatively from soil matrix. The inefficient extraction of 137 Cs from soil matrix was attributed to its incorporation into the interstitial sites. Experiments on tissue papers using CMC showed near quantitative 137 Cs recovery. On the other hand, recovery from plant samples varied between 50(±5) % (for stems) and 75(±5) % (for leaves). (author)

Influence of implant position on clinical crown length and peri-implant soft tissue dimensions at implant-supported single crowns replacing maxillary central incisors

DEFF Research Database (Denmark)

Peng, Min; Fei, Wei; Hosseini, Mandana

2013-01-01

The aims of the present study were to evaluate the influence of implant position on clinical crown length and marginal soft tissue dimensions at implant-supported single crowns of maxillary central incisors, and to validate the papilla index score (PIS). Twenty-five patients, who had lost one of ...... abutments and did not necessarily result in an increased crown length. The distal implant papilla heightwas obviously shorter, althoughthe mesial papilla height was similar to thatof the healthy dentition.The papilla index score was tested to be a valid index for papilla fill....

Elliptic Fourier analysis of crown shapes in Quercus petraea trees

OpenAIRE

Ovidiu Hâruţa

2011-01-01

Shape is a fundamental morphological descriptor, significant in taxonomic research as well as in ecomorphology, one method of estimation being from digitally processed images. In the present study, were analysed shapes of Q. petraea crowns, pertaining to five different stem diameter classes, from three similar stands. Based on measurements on terrestrial digital vertical photos, crown size analysis was performed and correlations between crown and stem variables were tested. Linear regression ...

Fractal approach to computer-analytical modelling of tree crown

International Nuclear Information System (INIS)

Berezovskaya, F.S.; Karev, G.P.; Kisliuk, O.F.; Khlebopros, R.G.; Tcelniker, Yu.L.

1993-09-01

In this paper we discuss three approaches to the modeling of a tree crown development. These approaches are experimental (i.e. regressive), theoretical (i.e. analytical) and simulation (i.e. computer) modeling. The common assumption of these is that a tree can be regarded as one of the fractal objects which is the collection of semi-similar objects and combines the properties of two- and three-dimensional bodies. We show that a fractal measure of crown can be used as the link between the mathematical models of crown growth and light propagation through canopy. The computer approach gives the possibility to visualize a crown development and to calibrate the model on experimental data. In the paper different stages of the above-mentioned approaches are described. The experimental data for spruce, the description of computer system for modeling and the variant of computer model are presented. (author). 9 refs, 4 figs

Determination of stability constants of K and Cs nitrate complex with dicyclohexyl-18-crown-6 and dibenzo-18-crown-6 in isopropanol aqueous solutions

International Nuclear Information System (INIS)

Myasoedova, T.G.; Ponomareva, A.V.; Zagorets, P.A.; Filippov, E.A.

1984-01-01

Total stability constants of K and Cs nitrate complexes with dicyclohexyl-18-crown-6 and dibenzo-18-crown-6 in isopropanol aqueous solutions were determined by the method of low-frequency contact conductometry. Clearly defined K/Cs selectivity is observed for the system with dibenzo-18-crown-6. It is shown that lgβ depends on permittivity of the solvent. The decrease of permittivity of isopropanol aqueous solutions results in reduction of K/Cs selectivity of DB18C6

Determination of stability constants of K and Cs nitrate complex with dicyclohexyl-18-crown-6 and dibenzo-18-crown-6 in isopropanol aqueous solutions

Energy Technology Data Exchange (ETDEWEB)

Myasoedova, T G; Ponomareva, A V; Zagorets, P A; Filippov, E A [Moskovskij Khimiko-Tekhnologicheskij Inst. (USSR)

1984-08-01

Total stability constants of K and Cs nitrate complexes with dicyclohexyl-18-crown-6 and dibenzo-18-crown-6 in isopropanol aqueous solutions were determined by the method of low-frequency contact conductometry. Clearly defined K/Cs selectivity is observed for the system with dibenzo-18-crown-6. It is shown that lg..beta.. depends on permittivity of the solvent. The decrease of permittivity of isopropanol aqueous solutions results in reduction of K/Cs selectivity of DB18C6.

RICHMOND CROWN - FOR RESTORATION OF BADLY MUTILATED POSTERIOR TEETH : A CASE REPORT

Directory of Open Access Journals (Sweden)

Yadav

2015-07-01

Full Text Available Restoration of badly broken endodontically treated teeth is a common problem in restorative dentistry. Such teeth often require additional support from the root canal by means of a post and core restoration. In cases where tooth structure is significantly lost full coverage restorations for posterior teeth are necessary to achieve proper tooth form and function. Badly broken teeth with minimal or no crown structure require added retention and support. The Richmond crown can be a good treatment alternative for restoration of such teeth. The Richmond crown was introduced in 1878 and incorporated a threaded tube in the canal with a screw retained crown. It was later modified to eliminate the threaded tube and was redesigned as a one piece dowel and crown. This case report shows restoration of badly mutilated posterior teeth with Richmond crown.

Rapid crown root development confers tolerance to zinc deficiency in rice

Directory of Open Access Journals (Sweden)

Amrit Kaur eNanda

2016-03-01

Full Text Available Zinc (Zn deficiency is one of the leading nutrient disorders in rice (Oryza sativa. Many studies have identified Zn efficient rice genotypes, but causal mechanisms for Zn deficiency tolerance remain poorly understood. Here we report a detailed study of the impact of Zn deficiency on crown root development of rice genotypes, differing in their tolerance to this stress. Zn deficiency delayed crown root development and plant biomass accumulation in both Zn efficient and inefficient genotypes, with the effects being much stronger in the latter. Zn efficient genotypes had developed new crown roots as early as three days after transplanting (DAT to a Zn deficient field and that was followed by a significant increase in total biomass by 7 DAT. Zn-inefficient genotypes developed few new crown roots and did not increase biomass during the first seven days following transplanting. This correlated with Zn efficient genotypes retranslocating a higher proportion of shoot Zn to their roots, compared to Zn inefficient genotypes. These latter genotypes were furthermore not efficient in utilizing the limited Zn for root development. Histological analyses indicated no anomalies in crown tissue of Zn-efficient or inefficient genotypes that would have suggested crown root emergence was impeded. We therefore conclude that the rate of crown root initiation was differentially affected by Zn deficiency between genotypes. Rapid crown root development, following transplanting, was identified as a main causative trait for tolerance to Zn deficiency and better Zn retranslocation from shoot to root was a key attribute of Zn-efficient genotypes.

CAD/CAM glass ceramics for single-tooth implant crowns: a finite element analysis.

Science.gov (United States)

Akça, Kvanç; Cavusoglu, Yeliz; Sagirkaya, Elcin; Aybar, Buket; Cehreli, Murat Cavit

2013-12-01

To evaluate the load distribution of CAD/CAM mono-ceramic crowns supported with single-tooth implants in functional area. A 3-dimensional numerical model of a soft tissue-level implant was constructed with cement-retained abutment to support glass ceramic machinable crown. Implant-abutment complex and the retained crown were embedded in a Ø 1.5 × 1.5 cm geometric matrix for evaluation of mechanical behavior of mono-ceramic CAD/CAM aluminosilicate and leucite glass crown materials. Laterally positioned axial load of 300 N was applied on the crowns. Resulting principal stresses in the mono-ceramic crowns were evaluated in relation to different glass ceramic materials. The highest compressive stresses were observed at the cervical region of the buccal aspect of the crowns and were 89.98 and 89.99 MPa, for aluminosilicate and leucite glass ceramics, respectively. The highest tensile stresses were observed at the collar of the lingual part of the crowns and were 24.54 and 25.39 MPa, respectively. Stresses induced upon 300 N static loading of CAD/CAM aluminosalicate and leucite glass ceramics are below the compressive strength of the materials. Impact loads may actuate the progress to end failure of mono-ceramic crowns supported by metallic implant abutments.

Description of the immature stages of the weevil Anthonomus vis Clark (Coleoptera, Curculionidae, inquiline into the gall of Leandra aurea (Melastomataceae

Directory of Open Access Journals (Sweden)

Daniela de Cassia Bená

2013-12-01

Full Text Available Description of the immature stages of the weevil Anthonomus vis Clark (Coleoptera, Curculionidae, inquiline into the gall of Leandra aurea (Melastomataceae. The third instar larva and the pupa of Anthonomus vis Clark, 1992 are described and illustrated, based upon specimens collected in the Serra de São José, Tiradentes, in Minas Gerais, southeastern Brazil. The species was previously known from the type series collected in the states of Amapá and Pará. Comparisons with the larva and pupa of A. grandis Boheman, 1843 and A. monostigma Champion, 1903 are included. The larvae of A. vis live as inquilines in the galls induced by a species of momphid moths (Lepidoptera, Momphidae in the stems of Leandra aurea (Cham. Cogn. (Melastomataceae.

Evaluation of different sterilization and disinfection methods on commercially made preformed crowns.

Science.gov (United States)

Yilmaz, Y; Guler, C

2008-12-01

The aim of this study was to evaluate the changes caused by different sterilization or disinfection methods on the vestibular surface of four commercially made preformed crowns using stereomicroscopy and scanning electron microscopy (SEM). Preformed crowns (NuSmile Primary Anterior Crown (NSC), Kinder Krowns (KK), Pedo Pearls (PP) and polycarbonate crowns (PC)) were sterilized and/or disinfected by one of the following techniques: no sterilization or disinfection (G1 control group); steam autoclaving at 134 degrees C (30 psi) for 4 min (G2); steam autoclaving at 134 degrees C (30 psi) for 12 min (G3); steam autoclaving at 121 degrees C (15 psi) for 30 min (G4); and ultrasonication in a bath containing 4% Lysetol AF for 5 min at room temperature (chemical disinfection) (G5). Scanning electron micrographs of the crowns were taken before and after their sterilization or disinfection. The changes on the vestibular surface were then scored for the presence or absence of crazing, contour alteration, fracturing, and vestibular surface changes. The data were analyzed statistically using the chi-square test. No changes were observed before and after sterilization or disinfection in the stereomicroscopic evaluation of the vestibular surface of the crowns. However, all methods in which steam autoclaving was used to sterilize the crowns caused significant (P < 0.05) crazing and contour alterations of the vestibular surface of the crowns when they were examined by SEM. Chemical disinfection using an aldehyde-free disinfectant is the preferred method of disinfection for crowns that have been used previously in other dental patients.

Usurpation of a Crowned Lapwing Vanellus coronatus nest by ...

African Journals Online (AJOL)

I report an instance of usurpation of a Crowned Lapwing Vanellus coronatus nest by a pair of African Wattled Lapwings Vanellus senegalensis. The nest, which originally contained a single Crowned Lapwing egg, eventually contained an additional three Wattled Lapwing eggs, before it was predated. Although parents of ...

A finite element analysis of novel vented dental abutment geometries for cement‐retained crown restorations

Science.gov (United States)

Rodriguez, Lucas C.; Saba, Juliana N.; Meyer, Clark A.; Chung, Kwok‐Hung; Wadhwani, Chandur

2016-01-01

Abstract Recent literature indicates that the long‐term success of dental implants is, in part, attributed to how dental crowns are attached to their associated implants. The commonly utilized method for crown attachment – cementation, has been criticized because of recent links between residual cement and peri‐implant disease. Residual cement extrusion from crown‐abutment margins post‐crown seating is a growing concern. This study aimed at (1) identifying key abutment features, which would improve dental cement flow characteristics, and (2) understanding how these features would impact the mechanical stability of the abutment under functional loads. Computational fluid dynamic modeling was used to evaluate cement flow in novel abutment geometries. These models were then evaluated using 3D‐printed surrogate models. Finite element analysis also provided an understanding of how the mechanical stability of these abutments was altered after key features were incorporated into the geometry. The findings demonstrated that the key features involved in improved venting of the abutment during crown seating were (1) addition of vents, (2) diameter of the vents, (3) location of the vents, (4) addition of a plastic screw insert, and (5) thickness of the abutment wall. This study culminated in a novel design for a vented abutment consisting of 8 vents located radially around the abutment neck‐margin plus a plastic insert to guide the cement during seating and provide retrievability to the abutment system.Venting of the dental abutment has been shown to decrease the risk of undetected residual dental cement post‐cement‐retained crown seating. This article will utilize a finite element analysis approach toward optimizing dental abutment designs for improved dental cement venting. Features investigated include (1) addition of vents, (2) diameter of vents, (3) location of vents, (4) addition of plastic screw insert, and (5) thickness of abutment wall. PMID

Production of anticandidal cotton textiles treated with oak gall extract

Directory of Open Access Journals (Sweden)

Ahmed A. Tayel

Full Text Available Candida albicans, one of the most dreadful fungal pathogens threatening humans, could not be easily prevented. The anticandidal activity of oak gall extract, Quercus infectoria (QIE, was investigated as a potential natural alternative to synthetic and chemical fungicides. QIE anticandidal potentiality was confirmed using both qualitative and quantitative assays. Cotton textiles were treated with QIE and then evaluated as anticandidal fabrics. QIE-treated textiles had a potent anticandidal activity, which could completely inhibit the inoculated C. albicans cells. The durability of anticandidal activity in QIE-treated textiles almost completely disappeared after the fourth laundering cycle. QIE could be recommended, however, as a potent anticandidal agent for preparing antiseptic solutions and emulsions and as a finishing agent for manufacturing anticandidal disposable diapers and hygienic clothes.

Sonographic Analysis of the Collapsed Gall Bladder

International Nuclear Information System (INIS)

Han, Sang Suk; Choi, Jae Young; Choi, Seok Jin; Eun, Chung Ki; Nam, Kyung Jin; Lee, Jeong Mi

1996-01-01

their underlying pathologies were as follows : gall stone(10), hepatitis(5),ascites(3), and cholecystitis(2). According to our results, we can conclude that US is very accurate to diagnose gall stone in cases showing stony echo or acoustic shadow even in the collapsed gallbladder but it is nearly impossible to differentiate underlying pathologies in cases without such findings and the possibility of re-expansion of GB must be considered before the final decision of surgical treatment for any collapsed gallbladder

Insetos indutores de galhas da porção sul da Cadeia do Espinhaço, Minas Gerais, Brasil Gall inducing insects from southern portion of the Espinhaço Range, Minas Gerais, Brazil

Directory of Open Access Journals (Sweden)

Marco Antonio A. Carneiro

2009-12-01

Full Text Available A riqueza de insetos galhadores é maior nas latitudes intermediárias em hábitats quentes e com vegetação esclerófila sob estresse hídrico e de nutrientes. Em regiões tropicais, os campos rupestres são indicados como hábitats ricos em espécies de insetos galhadores. Neste trabalho, foram descritas as galhas induzidas por insetos e suas plantas hospedeiras na porção sul da Cadeia do Espinhaço, sudeste do Brasil. Foram selecionados 60 sítios em seis regiões ao longo na porção sul da Cadeia do Espinhaço no estado de Minas Gerais. Em cada sítio 100 plantas foram amostradas totalizando 6.000 plantas censuradas ao longo de um gradiente altitudinal de 668 a 1860m. Foram encontrados 241 morfotipos de galhas em 142 espécies de plantas distribuídas em 29 famílias e de um total de 384 espécies de plantas amostradas. As famílias mais ricas em espécies de insetos galhadores foram Asteraceae (42%, principalmente espécies do gênero Baccharis. A maior parte das galhas (85% foi induzida por insetos da família Cecidomyiidae seguidos por Lepidoptera (4% e Homoptera (3%. Os ramos foram os órgãos mais freqüentemente atacados (72% enquanto que os morfotipos mais comuns foram o elíptico (37% e o globóide (36%. A espécie de planta hospedeira que apresentou mais morfotipos de galhas foi Baccharis pseudomyriocephala com 10 galhas distintas. Este estudo sustenta a afirmativa que campos rupestres apresentam uma elevada riqueza em espécies de insetos galhadores.Galling species richness is higher at intermediate latitudes on warm habitats and sclerophyllous vegetation under water and nutrient stress. In the tropical region, galling species richness is higher in rupestrian fields. Here the gall-inducing insects and their host plants of the southern portion of the Espinhaço range, southeastern Brazil are described. 60 study sites from six distinct regions along the Espinhaço range, at Minas Gerais state were selected. In each study site 100

Canopy Fuel Load Mapping of Mediterranean Pine Sites Based on Individual Tree-Crown Delineation

Directory of Open Access Journals (Sweden)

Giorgos Mallinis

2013-12-01

Full Text Available This study presents an individual tree-crown-based approach for canopy fuel load estimation and mapping in two Mediterranean pine stands. Based on destructive sampling, an allometric equation was developed for the estimation of crown fuel weight considering only pine crown width, a tree characteristic that can be estimated from passive imagery. Two high resolution images were used originally for discriminating Aleppo and Calabrian pines crown regions through a geographic object based image analysis approach. Subsequently, the crown region images were segmented using a watershed segmentation algorithm and crown width was extracted. The overall accuracy of the tree crown isolation expressed through a perfect match between the reference and the delineated crowns was 34.00% for the Kassandra site and 48.11% for the Thessaloniki site, while the coefficient of determination between the ground measured and the satellite extracted crown width was 0.5. Canopy fuel load values estimated in the current study presented mean values from 1.29 ± 0.6 to 1.65 ± 0.7 kg/m2 similar to other conifers worldwide. Despite the modest accuracies attained in this first study of individual tree crown fuel load mapping, the combination of the allometric equations with satellite-based extracted crown width information, can contribute to the spatially explicit mapping of canopy fuel load in Mediterranean areas. These maps can be used among others in fire behavior prediction, in fuel reduction treatments prioritization and during active fire suppression.

Failure analysis of various monolithic posterior aesthetic dental crowns using finite element method

Science.gov (United States)

Porojan, Liliana; Topală, Florin

2017-08-01

The aim of the study was to assess the effect of material stiffness and load on the biomechanical performance of the monolithic full-coverage posterior aesthetic dental crowns using finite element analysis. Three restorative materials for monolithic dental crowns were selected for the study: zirconia; lithium disilicate glass-ceramic, and resin-based composite. Stresses were calculated in the crowns for all materials and in the teeth structures, under different load values. The experiments show that dental crowns made from all this new aesthetic materials processed by CAD/CAM technologies would be indicated as monolithic dental crowns for posterior areas.

Indian Council of Medical Research consensus document for the management of gall bladder cancer

Science.gov (United States)

Shukla, Hari Shankar; Sirohi, Bhawna; Behari, Anu; Sharma, Atul; Majumdar, Jahar; Ganguly, Manomoy; Tewari, Mallika; Kumar, Sandeep; Saini, Sunil; Sahni, Peush; Singh, Tomcha; Kapoor, Vinay Kumar; Sucharita, V.; Kaur, Tanvir; Shukla, Deepak Kumar; Rath, Goura Kishor

2015-01-01

EXECUTIVE SUMMARY The document is based on consensus among the experts and best available evidence pertaining to Indian population and is meant for practice in India.All postcholecystectomy gallbladder specimens should be opened and examined carefully by the operating surgeon and be sent for histopathological examination.All “incidental” gall bladder cancers (GBCs) picked up on histopathological examination should have an expert opinion.Evaluation of a patient with early GBC should include essential tests: A computed tomography (CT) scan (multi-detector or helical) of the abdomen and pelvis for staging with a CT chest or chest X-ray, and complete blood counts, renal and liver function tests. magnetic resonance imaging/positron emission tomography (PET)-CT are not recommended for all patients.For early stage disease (up to Stage IVA), surgery is recommended. The need for adjuvant treatment would be guided by the histopathological analysis of the resected specimen.Patients with Stage IVB/metastatic disease must be assessed for palliative e.g. endoscopic or radiological intervention, chemotherapy versus best supportive care on an individual basis. These patients do not require extensive workup outside of a clinical trial setting.There is an urgent need for multicenter trials from India covering various aspects of epidemiology (viz., identification of population at high-risk, organized follow-up), clinical management (viz., bile spill during surgery, excision of all port sites, adjuvant/neoadjuvant therapy) and basic research (viz., what causes GBC). PMID:26157282

Effects of hot water treatments on dormant grapevine propagation materials used for grafted vine production

Directory of Open Access Journals (Sweden)

Soltekin Oguzhan

2017-01-01

Full Text Available Agrobacterium vitis is responsible for the crown gall disease of grapevine which breaks the grapevine trunk vascular system. Nutrient flow is prevented by crown gall and it leads to weak growth and death of the plants. It can be destructive disease often encountered in vineyards and it can be spread in cuttings for propagation. Thermotherapy treatment is an alternative method for eradicating A. vitis from grapevine cuttings but effects of thermotherapy treatments on dormant vine tissue, bud vitality, rooting and shooting of the propagation materials are not yet fully understood. In this research, it is aimed to determine the effects of thermotherapy treatment (Hot water treatment on callus formation (at the basal part and grafting point, grafted vine quality (shoot length, shoot width, root number, shooting and rooting development, fresh and dry weight of shoots and roots and final take in the grafted vine production. Experiment was conducted in the nursery of Manisa Viticultural Research Institute. Rootstocks (Kober 5BB, Couderc 1613 and 41B and scions (Sultan 7 and Manisa sultanı were hot-water treated at 50°C for 30 minutes which is the most common technique against Agrobacterium vitis. After thermotherapy treatment, all rootstocks were grafted with Sultan 7 and Manisa sultanıvarieties. They were kept for 22 days in callusing room for callus development and then they were planted in polyethlyene bags for rooting. At the end of the study, significant treatment x rootstock interaction were observed for the final take of Sultan 7 variety. Thermotherapy treated of 1613C/Sultan 7 combinations had more final take than the control (untreated group. For instance, hot water treated cuttings of 1613C/Sultan 7 combinations had 75% final take while the control group had the 70%. Also there were not observed any adverse effects of HWT on bud and tissue vitality.

Zirconia crowns for rehabilitation of decayed primary incisors: an esthetic alternative.

Science.gov (United States)

Ashima, G; Sarabjot, K Bhatia; Gauba, K; Mittal, H C

2014-01-01

Esthetic management of extensively decayed primary maxillary anterior teeth requiring full coronal coverage restoration is usually challenging to the pediatric dentists especially in very young children. Many esthetic options have been tried over the years each having its own advantages, disadvantages and associated technical, functional or esthetic limitations. Zirconia crowns have provided a treatment alternative to address the esthetic concerns and ease of placement of extra-coronal restorations on primary anterior teeth. The present article presents a case where grossly decayed maxillary primary incisors were restored esthetically and functionally with ready made zirconia crowns (ZIRKIZ, HASS Corp; Korea). After endodontic treatment the decayed teeth were restored with zirconia crowns. Over a 30 months period, the crowns have demonstrated good retention and esthetic results. Dealing with esthetic needs in children with extensive loss of tooth structure, using Zirconia crowns would be practical and successful. The treatment described is simple and effective and represents a promising alternative for rehabilitation of decayed primary teeth.

Application of terrestrial laser scanning for measuring tree crown structures

International Nuclear Information System (INIS)

Pretzsch, H.; Seifert, S.; Huang, P.

2011-01-01

This paper addresses the potential of terrestrial laser scanning (TLS) for describing and modelling of tree crown structure and dynamics. We first present a general approach for the metabolic and structural scaling of tree crowns. Out of this approach we emphasize those normalization and scaling parameters which become accessible by TLS. For example we show how the individual tree leaf area index, convex hull, and its space-filling by leaves can be extracted out of laser scan data. This contributes to a theoretical and empirical substantiation of crown structure models which were missing so far for e.g. quantification of structural and species diversity in forest stands, inventory of crown biomass, species detection by remote sensing, and understanding of self- and alien-thinning in pure and mixed stands. Up to now works on this topic delivered a rather scattered empirical knowledge mainly by single inventories of trees and stands. In contrast, we recommend to start with a model approach, and to complete existing data with repeated TLS inventories in order to come to a consistent and theoretically based model of tree crowns. (author) [de

Experimental investigation of the abrasive crown dynamics in orbital atherectomy.

Science.gov (United States)

Zheng, Yihao; Belmont, Barry; Shih, Albert J

2016-07-01

Orbital atherectomy is a catheter-based minimally invasive procedure to modify the plaque within atherosclerotic arteries using a diamond abrasive crown. This study was designed to investigate the crown motion and its corresponding contact force with the vessel. To this end, a transparent arterial tissue-mimicking phantom made of polyvinyl chloride was developed, a high-speed camera and image processing technique were utilized to visualize and quantitatively analyze the crown motion in the vessel phantom, and a piezoelectric dynamometer measured the forces on the phantom during the procedure. Observed under typical orbital atherectomy rotational speeds of 60,000, 90,000, and 120,000rpm in a 4.8mm caliber vessel phantom, the crown motion was a combination of high-frequency rotation at 1000, 1500, and 1660.4-1866.1Hz and low-frequency orbiting at 18, 38, and 40Hz, respectively. The measured forces were also composed of these high and low frequencies, matching well with the rotation of the eccentric crown and the associated orbital motion. The average peak force ranged from 0.1 to 0.4N at different rotational speeds. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

Uniform versus asymmetric shading mediates crown recession in conifers.

Directory of Open Access Journals (Sweden)

Amanda L Schoonmaker

Full Text Available In this study we explore the impact of asymmetrical vs. uniform crown shading on the mortality and growth of upper and lower branches within tree crowns, for two conifer species: shade intolerant lodgepole pine (Pinus contorta and shade tolerant white spruce (Picea glauca. We also explore xylem hydraulics, foliar nutrition, and carbohydrate status as drivers for growth and expansion of the lower and upper branches in various types of shading. This study was conducted over a two-year period across 10 regenerating forest sites dominated by lodgepole pine and white spruce, in the lower foothills of Alberta, Canada. Trees were assigned to one of four shading treatments: (1, complete uniform shading of the entire tree, (2 light asymmetric shading where the lower 1/4-1/3 of the tree crown was shaded, (3 heavy asymmetric shading as in (2 except with greater light reduction and (4 control in which no artificial shading occurred and most of the entire crown was exposed to full light. Asymmetrical shading of only the lower crown had a larger negative impact on the bud expansion and growth than did uniform shading, and the effect was stronger in pine relative to spruce. In addition, lower branches in pine also had lower carbon reserves, and reduced xylem-area specific conductivity compared to spruce. For both species, but particularly the pine, the needles of lower branches tended to store less C than upper branches in the asymmetric shade, which could suggest a movement of reserves away from the lower branches. The implications of these findings correspond with the inherent shade tolerance and self-pruning behavior of these conifers and supports a carbon based mechanism for branch mortality--mediated by an asymmetry in light exposure of the crown.

Innervation of Extrahepatic Biliary Tract, With Special Reference to the Direct Bidirectional Neural Connections of the Gall Bladder, Sphincter of Oddi and Duodenum in Suncus murinus, in Whole-Mount Immunohistochemical Study.

Science.gov (United States)

Yi, S-Q; Ren, K; Kinoshita, M; Takano, N; Itoh, M; Ozaki, N

2016-06-01

Sphincter of Oddi dysfunction is one of the most important symptoms in post-cholecystectomy syndrome. Using either electrical or mechanical stimulation and retrogradely transported neuronal dyes, it has been demonstrated that there are direct neural pathways connecting gall bladder and the sphincter of Oddi in the Australian opossum and the golden hamster. In the present study, we employed whole-mount immunohistochemistry staining to observe and verify that there are two different plexuses of the extrahepatic biliary tract in Suncus murinus. One, named Pathway One, showed a fine, irregular but dense network plexus that ran adhesively and resided on/in the extrahepatic biliary tract wall, and the plexus extended into the intrahepatic area. On the other hand, named Pathway Two, exhibiting simple, thicker and straight neural bundles, ran parallel to the surface of the extrahepatic biliary tract and passed between the gall bladder and duodenum, but did not give off any branches to the liver. Pathway Two was considered to involve direct bidirectional neural connections between the duodenum and the biliary tract system. For the first time, morphologically, we demonstrated direct neural connections between gall bladder and duodenum in S. murinus. Malfunction of the sphincter of Oddi may be caused by injury of the direct neural pathways between gall bladder and duodenum by cholecystectomy. From the viewpoint of preserving the function of the major duodenal papilla and common bile duct, we emphasize the importance of avoiding kocherization of the common bile duct so as to preserve the direct neural connections between gall bladder and sphincter of Oddi. © 2015 Blackwell Verlag GmbH.

Pattern of attack of a galling insect reveals an unexpected preference-performance linkage on medium-sized resources Padrão de ataque de um inseto galhador revela uma inesperada ligação entre preferência e performance sobre recursos de tamanho médio

Directory of Open Access Journals (Sweden)

Jean C. Santos

2010-03-01

Full Text Available Pattern of attack of a galling insect reveals an unexpected preference-performance linkage on medium-sized resources. The Plant Vigor Hypothesis (PVH predicts oviposition preference and higher offspring performance on longer and fast-growing shoots, and although several studies have tested its predictions, long-term studies concerning the patterns of host selection by galling species are still lacking. The PVH was tested in this study using Bauhinia brevipes (Fabaceae as the host of a leaf gall midge, Asphondylia microcapillata (Diptera, Cecidomyiidae during three consecutive years. Shoots were collected from the same 80 plants between 2001 and 2003 and shoot length, number of healthy and galled leaves, gall number, and mortality factors were recorded. Nearly 600 galls were found on the 5,800 shoots collected. Medium-sized shoots supported from 46 to 70% of all galls, with greater gall survival rate in 2002 and 2003. A decrease in parasitism rate coupled with an increase in gall predation lead to a constant similar gall survivorship rate in all years (x = 22.7%. Although gall abundance varied among years (122 in 2001, 114 in 2002 and 359 in 2003 preference for longer shoots was not observed because the percentage of galled shoots and galled leaves were higher on medium shoot length classes in all years. The observed distribution of gall abundance and galled shoots were always greater than the expected distribution on medium shoot length classes. These findings do not support the PVH, and show that A. microcapillata can maximize the female preference and larval performance on medium-sized shoots of B. brevipes.A Hipótese do Vigor de Plantas (HVP prevê uma oviposição preferencial e alta performance da prole em ramos longos e de crescimento rápido da planta hospedeira. Embora diversos estudos tenham testado suas predições, estudos de longa duração focados no padrão de seleção de planta hospedeira por insetos galhadores ainda s

Fracture load of different crown systems on zirconia implant abutments.

Science.gov (United States)

Albrecht, T; Kirsten, A; Kappert, H F; Fischer, H

2011-03-01

The purpose of this study was to evaluate the fracture load of single zirconia abutment restorations using different veneering techniques and materials. The abutment restorations were divided into 6 groups with 20 samples each: test abutments (control group A), lithium disilicate ceramic crowns bonded on incisor abutments (group B), leucite ceramic crowns bonded on incisor abutments (group C), premolar abutments directly veneered with a fluor apatite ceramic (group D (layered) and group E (pressed)) and premolar abutments bonded with lithium disilicate ceramic crowns (group F). The fracture load of the restorations was evaluated using a universal testing machine. Half of each group was artificially aged (chewing simulation and thermocycling) before evaluating the fracture load with the exception of the test abutments. The fracture load of the test abutments was 705 ± 43N. Incisor abutments bonded with lithium disilicate or leucite ceramic crowns (groups B and C) showed fracture loads of about 580N. Premolar restorations directly veneered with fluor apatite ceramic (groups D and E) showed fracture loads of about 850N. Premolar restorations bonded with lithium disilicate ceramic crowns (group F) showed fracture loads of about 1850N. The artificial ageing showed no significant influence on the strength of the examined restorations. All ceramic crowns made of lithium disilicate glass-ceramic, adhesively bonded to premolar abutments showed the highest fracture loads in this study. However, all tested groups can withstand physiological bite forces. Copyright © 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Telescopic crowns as attachments for implant supported restorations: a case series.

Science.gov (United States)

Hoffmann, Oliver; Beaumont, Christian; Tatakis, Dimitris N; Zafiropoulos, Gregory-George

2006-01-01

The use of dental implants to support mandibular or maxillary overdentures is a widely used treatment modality. Advantages are an increase in retention, an increase in chewing ability, and easy access for oral hygiene procedures. While telescopic and conical crowns have been used for decades to connect natural teeth to overdentures, not many cases have been reported in the literature of telescopic crowns placed on implants to support overdentures. This article describes 7 patients with overdentures supported by telescopic crowns who received 65 implants (ITI Straumann). The cases presented in this report have been in function for up to 4.5 years. During that time no adverse events were reported. The use of telescopic crowns as attachments for implant-supported overdentures may be a viable treatment option.

Recurrent intussusception, coeliac disease and cholelithiasis: A unique combination

Directory of Open Access Journals (Sweden)

Sinha C

2007-01-01

Full Text Available Authors report an 11-month-old female child, who presented with recurrent episodes of colicky abdominal pain and diarrhea. An abdominal ultrasound revealed small bowel intussusception. She was also noted to have a thick walled gall bladder and a solitary gallstone. Further investigations confirmed the diagnosis of coeliac disease. The combination of small bowel intussusception, coeliac disease and cholelithiasis is unique and has not been reported in the literature.

Analysis of iron gall inks by PIXE

Energy Technology Data Exchange (ETDEWEB)

Budnar, Milos [Jozef Stefan Institute, Jamova 39, p.p. 3000, SI-1001 Ljubljana (Slovenia)]. E-mail: milos.budnar@ijs.si; Ursic, Mitja [Jozef Stefan Institute, Jamova 39, p.p. 3000, SI-1001 Ljubljana (Slovenia); Simcic, Jure [Jozef Stefan Institute, Jamova 39, p.p. 3000, SI-1001 Ljubljana (Slovenia); Pelicon, Primoz [Jozef Stefan Institute, Jamova 39, p.p. 3000, SI-1001 Ljubljana (Slovenia); Kolar, Jana [National University Library, Turjaska 1, SI-1000 Ljubljana (Slovenia); Selih, Vid Simon [University of Ljubljana, Faculty of Chemistry and Chemical Technology, Askerceva 5, SI-1000 Ljubljana (Slovenia); Strlic, Matija [University of Ljubljana, Faculty of Chemistry and Chemical Technology, Askerceva 5, SI-1000 Ljubljana (Slovenia)

2006-02-15

Micro- or non-destructive analytical approach is an imperative when analysing historical artefacts. Due to its practically non-destructive character, proton induced X-ray spectrometry (PIXE) has become a method of choice for the study of historical documents. In the present paper, use of in-air PIXE method for analysis of iron gall inks applied at handwriting of documents is evaluated. The errors arising from the non-uniform ink deposit, proton penetration depth and size of the proton beam versus width of ink lines, effects of surface roughness, as well as the importance of the PIXE set-up geometry on the accuracy of the results are discussed. It follows that the main problems can be attributed to the fact that PIXE is a surface technique and that the analysis is limited to a small amount of material, while ink deposit on the paper is usually non-uniform in depth as well as on the paper surface. Despite possible systematic uncertainties when applying the PIXE method, good correlation between determinations obtained by PIXE and atomic absorption spectroscopy (AAS) on model samples clearly demonstrate that the errors are well within a reasonable limit of a few percents.

Analysis of iron gall inks by PIXE

International Nuclear Information System (INIS)

Budnar, Milos; Ursic, Mitja; Simcic, Jure; Pelicon, Primoz; Kolar, Jana; Selih, Vid Simon; Strlic, Matija

2006-01-01

Micro- or non-destructive analytical approach is an imperative when analysing historical artefacts. Due to its practically non-destructive character, proton induced X-ray spectrometry (PIXE) has become a method of choice for the study of historical documents. In the present paper, use of in-air PIXE method for analysis of iron gall inks applied at handwriting of documents is evaluated. The errors arising from the non-uniform ink deposit, proton penetration depth and size of the proton beam versus width of ink lines, effects of surface roughness, as well as the importance of the PIXE set-up geometry on the accuracy of the results are discussed. It follows that the main problems can be attributed to the fact that PIXE is a surface technique and that the analysis is limited to a small amount of material, while ink deposit on the paper is usually non-uniform in depth as well as on the paper surface. Despite possible systematic uncertainties when applying the PIXE method, good correlation between determinations obtained by PIXE and atomic absorption spectroscopy (AAS) on model samples clearly demonstrate that the errors are well within a reasonable limit of a few percents

The Efficient Extraction of Phenolic Compounds from Oak Gall Using a Miniaturized Matrix Solid-Phase Dispersion Method before their HPLC Determination

Directory of Open Access Journals (Sweden)

Ahmad Daneshfar

2017-06-01

Conclusion: The proposed technique is simple and fast. It substantially reduced the amounts of sample, sorbent and organic solvents required for the extraction. The maximum amounts of the phenolic compounds were found in Qalqaf and Bramazu galls.

Clinical performance - a reflection of damage accumulation in ceramic dental crowns

Energy Technology Data Exchange (ETDEWEB)

Rekow, D.E. [Univ. of Medicine and Dentistry of New Jersey, Newark, NJ (United States). Dept. of Orthodontics; Thompson, V.P. [Univ. of Medicine and Dentistry of New Jersey, Newark, NJ (United States). New Jersey Dental School

2001-07-01

All-ceramic dental crowns have tremendous appeal for patients - their esthetics nearly match those of natural teeth. Unfortunately, the most esthetic materials are brittle and, consequently, are vulnerable to damage relating to shaping which is exacerbated during cyclic loading during normal chewing. Clinical performance of all-ceramic dental prostheses are directly dependent on damage introduced during fabrication and during fatigue loading associated with function. The accumulation of damage results in unacceptably high failure rates (where failure is defined as a complete fracture requiring replacement of the prosthesis). The relation between shaping damage and fatigue damage on clinical performance of all-ceramic dental crowns was investigated. Materials used commercially for all-ceramic crowns and investigated in this study included a series of different microstructures of machinable glass ceramics (Corning), aluminas and porcelains (Vita Zahnfabrik), and zirconia (Norton). As monolithic materials, strong, tough, fatigue-resistant materials are not sufficiently esthetic for crowns. Crowns fabricated from monolithic esthetic materials have high failure rates. Layering ceramics could provide acceptable strength through management of damage accumulation. (orig.)

Effects of crown release on growth and quality of even-aged red maple stands

Science.gov (United States)

Terry F. Strong; Audra E. Hubbell; Adam H. Weise; Gayne G. Erdmann

2006-01-01

The effects of six crown-release treatments on growth and bole quality of 54 dominant, codominant, and intermediate red maples (Acer rubrum L.) were examined in an even-aged stand in upper Michigan. Treatments included an unreleased control, a single-tree and a two-tree crown release, and a full crown-to-crown release of 5, 10, and 15ft. Twenty-two...

[Comparative adaptation of crowns of selective laser melting and wax-lost-casting method].

Science.gov (United States)

Li, Guo-qiang; Shen, Qing-yi; Gao, Jian-hua; Wu, Xue-ying; Chen, Li; Dai, Wen-an

2012-07-01

To investigate the marginal adaptation of crowns fabricated by selective laser melting (SLM) and wax-lost-casting method, so as to provide an experimental basis for clinic. Co-Cr alloy full crown were fabricated by SLM and wax-lost-casting for 24 samples in each group. All crowns were cemented with zinc phosphate cement and cut along longitudinal axis by line cutting machine. The gap between crown tissue surface and die was measured by 6-point measuring method with scanning electron microscope (SEM). The marginal adaptation of crowns fabricated by SLM and wax-lost-casting were compared statistically. The gap between SLM crowns were (36.51 ± 2.94), (49.36 ± 3.31), (56.48 ± 3.35), (42.20 ± 3.60) µm, and wax-lost-casting crowns were (68.86 ± 5.41), (58.86 ± 6.10), (70.62 ± 5.79), (69.90 ± 6.00) µm. There were significant difference between two groups (P casting method and SLM method provide acceptable marginal adaptation in clinic, and the marginal adaptation of SLM is better than that of wax-lost-casting method.

The general properties of water - nitrobenzene - crown - bis-1,2-dicarbollylcobaltate extraction systems

International Nuclear Information System (INIS)

Vanura, P.

2003-01-01

The extraction and stability constants in the system water - nitrobenzene have been collected and general rules valid for water - nitrobenzene - crown - bis-1,2-dicarbollylcobaltate extraction system have been found. The main principles are size compatibility of ion diameter and crown cavity diameters, the flexibility of crown, the basicity of crown and the steric factor of both the ligand and the extracted ion. The extraction in the system water - mineral acid or salt polyoxyethylene compound - bis-1,2-dicarbollylcobaltate - nitrobenzene is more complicated than can be expected from usually used ion diameter - crown cavity diameter compatibility principle. The other important factors are the basicity and the deformability of crown, steric aspect and the angles of bonds of extracted ion. The binuclear 'sandwich' complexes with H + ion and Sr 2+ or Ba 2+ ions have been proved for dibenzo-18-crown-6 (DB18C6). On the other hand, only SrL 2 and BaL 2 (L = 15C5) complexes are formed in nitrobenzene saturated with water. The addition of polyoxyethylene compound usually increases the distribution ratio of alkali earth metal ions and the selectivity of its mutual separation. (authors)

Fit of interim crowns fabricated using photopolymer-jetting 3D printing.

Science.gov (United States)

Mai, Hang-Nga; Lee, Kyu-Bok; Lee, Du-Hyeong

2017-08-01

The fit of interim crowns fabricated using 3-dimensional (3D) printing is unknown. The purpose of this in vitro study was to evaluate the fit of interim crowns fabricated using photopolymer-jetting 3D printing and to compare it with that of milling and compression molding methods. Twelve study models were fabricated by making an impression of a metal master model of the mandibular first molar. On each study model, interim crowns (N=36) were fabricated using compression molding (molding group, n=12), milling (milling group, n=12), and 3D polymer-jetting methods. The crowns were prepared as follows: molding group, overimpression technique; milling group, a 5-axis dental milling machine; and polymer-jetting group using a 3D printer. The fit of interim crowns was evaluated in the proximal, marginal, internal axial, and internal occlusal regions by using the image-superimposition and silicone-replica techniques. The Mann-Whitney U test and Kruskal-Wallis tests were used to compare the results among groups (α=.05). Compared with the molding group, the milling and polymer-jetting groups showed more accurate results in the proximal and marginal regions (P3D printing significantly enhanced the fit of interim crowns, particularly in the occlusal region. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Three types of gall-bladder motility at men with chronic cholecystitis and pyelonephritis and accompanying their parameters of kidney excretory function as well as metabolism

Directory of Open Access Journals (Sweden)

Oksana M Ivanyts’ka

2018-04-01

Full Text Available Background. Previously it has been shown that balneotherapy in the spa Truskavets’ (Ukraїna in men with chronic cholecystitis combined with pyelonephritis causes changes in gall-bladder motility. This is combined with changes in diurese and urinary excretion of metabolites.Individual analysis revealed not only quantitative but also qualitative differences in the postprandial motility of the gall-bladder. The purpose of this study is to identify the parameters of kidney excretory function as well as metabolism under which three types of the gall-bladdermotility skills differ significantly from each other. Materialandmethods. The object of observationwere the same ones 22men aged24-70 years old,who cameto the spaTruskavets’ for the treatment of chronic cholecystitiscombined withpyelonephritis inremission. On thetone and motility of gall-bladder judged byits fasting and postprandial volume (echocamera “Radmir”. In the daily  determined content of oxalate and nitrogen metabolites: creatinine, urea and uric acid, electrolytes: phosphates, chloride, calcium, magnesium, potassium and sodium. Nitrogenous metabolites in plasma of venous blood were determined also. The survey was conducted twice, before and after balneotherapy. Results. The method of cluster analysis has formed three homogeneous cholekinetics groups, namely:normokinesia as well as hypertonic-hyperkinetic and hyperkinetic-hypertonic dyskinesia.The method of discriminatory analysis revealed 13 parameters of daily urine and three parameters of blood, as well as body weight and height, electrokinetic index and Kerdoe’s index, in the totality of which three types of cholekinetics are clearly delineated.Conclusion. The type of postprandial cholekinetics is naturally associated with a number of parameters of the excretory renal function and metabolism.

Impact of a gall midge Parkiamyia paraensis (Diptera, Cecidomyiidae on the Amazonian plant Parkia pendula (Fabaceae Impacto do galhador Parkiamyia paraensis (Diptera, Cecidomyiidae sobre a planta da Amazônia Parkia pendula Benth. ex Walp. (Fabaceae

Directory of Open Access Journals (Sweden)

G. Wilson Fernandes

2007-12-01

Full Text Available We observed the occurrence of large numbers of galls induced by Parkiamyia paraensis (Diptera, Cecidomyiidae on the leaflets of Parkia pendula (Fabaceae in northern Para, Brazil. We addressed two questions in this study: i what is the proportion of attacked plants in the field, and nursery conditions?; and ii what is the impact of galls on the host plant? An average of 86% of the plants were galled in the field. Galled P. pendula were distinct from healthy individuals due to their prostrated architecture and death of terminal shoots. Approximately 50% of the total available leaves and 35% leaflets were attacked by P. paraensis on saplings under nursery conditions. Each one-year old plant supported an average of 1,300 galls, and an average of 60g allocated to galled tissue. Otherwise, attacked individuals were taller and heavier than healthy plants. Attacked plants weighed five times more than healthy plants. When the weight of the galls was removed, the total weight (aerial part without galls of attacked plants was drastically reduced, indicating that most of the biomass of attacked plants was due to the attack by P. paraensis galls. Although the data indicate a paradox, as young plants attacked by the galling herbivore appear to develop more vigorously than unattacked plants, we suggest that P. paraensis negatively affect P. pendula development.Observou-se a ocorrência de um grande número de galhas induzidas por Parkiamyia paraensis (Diptera, Cecidomyiidae nos folíolos de Parkia pendula (Fabaceae no norte do Pará, Brasil. Este estudo foi direcionado para responder duas perguntas: i qual é a proporção de plantas atacadas no campo e em condições de estufa? e ii qual é o impacto das galhas na planta hospedeira? Uma média de 86% das plantas apresentaram galhas no campo. Indivíduos com galhas de P. pendula eram distintos dos indivíduos saudáveis devido à arquitetura curvada e pela morte dos ramos terminais. Aproximadamente 50% do

Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns.

Science.gov (United States)

Abdullah, Adil Othman; Tsitrou, Effrosyni A; Pollington, Sarah

2016-01-01

This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone "PEEK", Telio CAD-Temp, and Protemp™4 (control group). The crowns were divided into four groups (n=10), Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99) µm, PEEK 46.75 (±8.26) µm, Telio CAD-Temp 56.10 (±5.65) µm, and Protemp™4 193.07(±35.96) µm (PCAD-Temp® 124.94 (±22.96) µm, PEEK 113.14 (±23.55) µm, Telio CAD-Temp 110.95 (±11.64) µm, and Protemp™4 143.48(±26.74) µm. The average fracture strength was: VITA CAD-Temp® 361.01 (±21.61) N, PEEK 802.23 (±111.29) N, Telio CAD-Temp 719.24 (±95.17) N, and Protemp™4 416.40 (±69.14) N. One-way ANOVA test showed a statistically significant difference for marginal gap, internal gap, and fracture strength between all groups (p0.05). CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns.

Fracture strength testing of crowns made of CAD/CAM composite resins.

Science.gov (United States)

Okada, Ryota; Asakura, Masaki; Ando, Akihiro; Kumano, Hirokazu; Ban, Seiji; Kawai, Tatsushi; Takebe, Jun

2018-03-28

The purpose of this study was to ascertain whether computer aided design/computer aided manufacturing (CAD/CAM) composite resin crowns have sufficient strength to withstand the bite force of the molar teeth. The null hypothesis was that the fracture strength of CAD/CAM composite resin crowns is lower than the average maximum bite force of the molar tooth. The crowns, which shape is the right maxillary first molar, were fabricated using four CAD/CAM blanks made of composite resins (Block HC: HC, KZR-CAD HR: HR, KZR-CAD HR2: HR2, Avencia Block: AVE) and one CAD/CAM blank made of lithium disilicate glass-ceramic (IPS e.max CAD: IPS), which was used as a control. Fracture strength of fabricated crowns bonded to metal abutment and biaxial flexural strength of the materials were evaluated. The results of fracture strength test and biaxial flexural strength test showed different tendencies. The fracture strength of CAD/CAM composite resin crowns except HC ranged from 3.3kN to 3.9kN, and was similar to that of IPS (3.3kN). In contrast, biaxial flexural strength of CAD/CAM composite resins ranged from 175MPa to 247MPa, and was significantly lower than that of IPS (360MPa). All CAD/CAM composite resin crowns studied presented about 3-4 times higher fracture strength than the average maximum bite force of the molar tooth (700-900N), which result leads to the conclusion that CAD/CAM composite resin crowns would have sufficient strength to withstand the bite force of the molar teeth. Copyright © 2017 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Radium separation through complexation by aqueous crown ethers and ion exchange or solvent extraction

Energy Technology Data Exchange (ETDEWEB)

Chiarizia, R.; Dietz, M.L.; Horwitz, E.P. [Argonne National Lab., IL (United States). Chemistry Div.; Burnett, W.C. [Florida State Univ., Tallahassee, FL (United States). Dept. of Oceanography

1997-11-01

The effect of three water-soluble, unsubstituted crown ethers (15-crown-5 (15C5), 18-crown-6 (18C6) and 21-crown-7 (21C7)) on the uptake of Ca, Sr, Ba and Ra cations by a sulfonic acid cation exchange resin, and on the extraction of the same cations by xylene solutions of dinonylnaphthalenesulfonic acid (HDNNS) from aqueous hydrochloric acid solutions has been investigated. The crown ethers enhance the sorption of the larger cations by the ion exchange resin, thereby improving the resin selectivity over calcium, a result of a synergistic interaction between the crown ether and the ionic functional groups of the resin. Similarly, the extraction of the larger alkaline earth cations into xylene by HDNNS is strongly synergized by the presence of the crown ethers in the aqueous phase. Promising results for intra-Group IIa cation separations have been obtained using each of the three crown ethers as the aqueous ligands and the sulfonic acid cation exchange resin. Even greater separation factors for the radium-calcium couple have been measured with the crown-ethers and HDNNS solutions in the solvent extraction mode. The application of the uptake and extraction results to the development of radium separation schemes is discussed and a possible flowchart for the determination of {sup 226}Ra/{sup 228}Ra in natural waters is presented.

Influence of coping design on the cervical color of ceramic crowns.

Science.gov (United States)

Paniz, Gianluca; Kang, Ki-Ho; Kim, Yongjeong; Kumagai, Naota; Hirayama, Hiroshi

2013-12-01

The replication of natural teeth, especially with single-tooth restorations, represents a challenge. Similar to metal ceramic crowns, different designs of zirconia substructures have been suggested to improve the esthetic results of zirconia ceramic crowns. The purpose of the study was to analyze the color of the cervical portion of single zirconia ceramic crowns fabricated with different zirconia coping designs. The color, measured on the CIELAB color scale, of 3 different groups of restorations (n=10) fabricated with zirconia coping (Lava) and feldspathic porcelain (Noritake Super Porcelain) was analyzed with a spectrophotometer. Conventional zirconia crowns with zirconia facial margins were compared with ceramic crowns with porcelain facial margins and either a horizontal reduction of the zirconia coping (1.0 mm reduction) or an additional vertical reduction (1.0 mm additional reduction). The 3 groups, each with a different coping extension, were examined with a 1-way ANOVA and the Fisher exact test, and the differences of the groups were evaluated by applying ΔE thresholds (α=.05). The mean color difference among all the groups was not clinically significant (ΔEcolor differences were present between the 2 porcelain butt margin groups of crowns (ΔE=1.06, between group H and V). Increased differences were present between the zirconia margin group and the porcelain butt margin group (ΔE=2.54 between group C and H; ΔE=2.41 between group C and V). Lab* values were examined in all the groups of crowns to determine the clinical implications. Within the limitation of the study, no significant differences were present among the tested groups of crowns. Nevertheless, although some differences were present between the zirconia margin group and the porcelain butt margin group, reduced differences were present between the 2 different cutback designs. Copyright © 2013 Editorial Council for the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights

Absorption infrared spectra of interaction products of cyclic polyethers 18-crown-6 and dibenzo-18-crown-6 with uranyl dinitrate hexahydrate

International Nuclear Information System (INIS)

Chumaevskij, N.A.; Belomestnykh, V.I.; Razgonyaeva, G.A.; Shabel'nik, K.S.; Afanas'eva, E.E.

1988-01-01

Using the method of IR spectroscopy it is established that during interaction of uranyl nitrate hexahydrate (UNH) with crown-ethers under investigation macrocycles adhere to UO 2 2+ via hydrogen bonds between water molecules and oxygen of polyethers. Interaction of UNH with the above-mentioned crowns leads to conformational rearrangement of cycles of polyethers and improvement of their symmetry, reflecting in noticeable simplification of IR spectra of interaction products as compared to spectra of initial cyclic polyethers

Numerical modeling of laboratory-scale surface-to-crown fire transition

Science.gov (United States)

Castle, Drew Clayton

Understanding the conditions leading to the transition of fire spread from a surface fuel to an elevated (crown) fuel is critical to effective fire risk assessment and management. Surface fires that successfully transition to crown fires can be very difficult to suppress, potentially leading to damages in the natural and built environments. This is relevant to chaparral shrub lands which are common throughout parts of the Southwest U.S. and represent a significant part of the wildland urban interface. The ability of the Wildland-Urban Interface Fire Dynamic Simulator (WFDS) to model surface-to-crown fire transition was evaluated through comparison to laboratory experiments. The WFDS model is being developed by the U.S. Forest Service (USFS) and the National Institute of Standards and Technology. The experiments were conducted at the USFS Forest Fire Laboratory in Riverside, California. The experiments measured the ignition of chamise (Adenostoma fasciculatum) crown fuel held above a surface fire spreading through excelsior fuel. Cases with different crown fuel bulk densities, crown fuel base heights, and imposed wind speeds were considered. Cold-flow simulations yielded wind speed profiles that closely matched the experimental measurements. Next, fire simulations with only the surface fuel were conducted to verify the rate of spread while factors such as substrate properties were varied. Finally, simulations with both a surface fuel and a crown fuel were completed. Examination of specific surface fire characteristics (rate of spread, flame angle, etc.) and the corresponding experimental surface fire behavior provided a basis for comparison of the factors most responsible for transition from a surface fire to the raised fuel ignition. The rate of spread was determined by tracking the flame in the Smokeview animations using a tool developed for tracking an actual flame in a video. WFDS simulations produced results in both surface fire spread and raised fuel bed

Fracture strength and failure mode of maxillary implant-supported provisional single crowns: a comparison of composite resin crowns fabricated directly over PEEK abutments and solid titanium abutments.

Science.gov (United States)

Santing, Hendrik Jacob; Meijer, Henny J A; Raghoebar, Gerry M; Özcan, Mutlu

2012-12-01

Polyetheretherketone (PEEK) temporary abutments have been recently introduced for making implant-supported provisional single crowns. Little information is available in the dental literature on the durability of provisional implant-supported restorations. The objectives of this study were to evaluate the fracture strength of implant-supported composite resin crowns on PEEK and solid titanium temporary abutments, and to analyze the failure types. Three types of provisional abutments, RN synOcta Temporary Meso Abutment (PEEK; Straumann), RN synOcta Titanium Post for Temporary Restorations (Straumann), and Temporary Abutment Engaging NobRplRP (Nobel Biocare) were used, and provisional screw-retained crowns using composite resin (Solidex) were fabricated for four different locations in the maxilla. The specimens were tested in a universal testing machine at a crosshead speed of 1 mm/minute until fracture occurred. The failure types were analyzed and further categorized as irreparable (Type 1) or reparable (Type 2). No significant difference was found between different abutment types. Only for the position of the maxillary central incisor, composite resin crowns on PEEK temporary abutments showed significantly lower (p Provisional crowns on PEEK abutments showed similar fracture strength as titanium temporary abutments except for central incisors. Maxillary right central incisor composite resin crowns on PEEK temporary abutments fractured below the mean anterior masticatory loading forces reported to be approximately 206 N. © 2010 Wiley Periodicals, Inc.

Crown-Level Tree Species Classification Using Integrated Airborne Hyperspectral and LIDAR Remote Sensing Data

Science.gov (United States)

Wang, Z.; Wu, J.; Wang, Y.; Kong, X.; Bao, H.; Ni, Y.; Ma, L.; Jin, J.

2018-05-01

Mapping tree species is essential for sustainable planning as well as to improve our understanding of the role of different trees as different ecological service. However, crown-level tree species automatic classification is a challenging task due to the spectral similarity among diversified tree species, fine-scale spatial variation, shadow, and underlying objects within a crown. Advanced remote sensing data such as airborne Light Detection and Ranging (LiDAR) and hyperspectral imagery offer a great potential opportunity to derive crown spectral, structure and canopy physiological information at the individual crown scale, which can be useful for mapping tree species. In this paper, an innovative approach was developed for tree species classification at the crown level. The method utilized LiDAR data for individual tree crown delineation and morphological structure extraction, and Compact Airborne Spectrographic Imager (CASI) hyperspectral imagery for pure crown-scale spectral extraction. Specifically, four steps were include: 1) A weighted mean filtering method was developed to improve the accuracy of the smoothed Canopy Height Model (CHM) derived from LiDAR data; 2) The marker-controlled watershed segmentation algorithm was, therefore, also employed to delineate the tree-level canopy from the CHM image in this study, and then individual tree height and tree crown were calculated according to the delineated crown; 3) Spectral features within 3 × 3 neighborhood regions centered on the treetops detected by the treetop detection algorithm were derived from the spectrally normalized CASI imagery; 4) The shape characteristics related to their crown diameters and heights were established, and different crown-level tree species were classified using the combination of spectral and shape characteristics. Analysis of results suggests that the developed classification strategy in this paper (OA = 85.12 %, Kc = 0.90) performed better than LiDAR-metrics method (OA = 79

Antioxidant, mutagenic and antimutagenic activities of an aqueous extract of Limoniastrum guyonianum gall.

Science.gov (United States)

Krifa, Mounira; Bouhlel, Ines; Skandrani, Ines; Chekir-Ghedira, Leila; Ghedira, Kamel

2014-01-01

An aqueous extract of Limoniastrum guyonianum gall (G extract) was tested on Salmonella typhimurium to assess its mutagenic and antimutagenic effects. This extract showed no mutagenicity when tested with S. typhimurium strain TA104 either with or without exogenous metabolic activation mixture (S9), whereas our findings revealed that the aqueous gall extract induced a mutagenic effect in S. typhimurium TA1538 when tested in the presence, as well as in the absence, of S9 activation mixture at the concentration of 500 µg/mL. Thus, the same concentration produced a mutagenic effect, when incubated with S. typhimurium TA100 in the presence of metabolic activation mixture. In contrast, our results showed a weak antimutagenic potential of the same extract against sodium azide in the presence of S. typhimurium TA100 and S. typhimurium TA1538 without metabolic activation (S9), whereas, in the presence of S. typhimurium TA104, we obtained a significant inhibition percentage (76.39%) toward 3.25 µg/plate of methylmethanesulfonate. Antimutagenicity against aflatoxin B1, 4-nitro-o-phenylene-diamine and 2-aminoanthracène was significant, with an inhibition percentage of, respectively, 70.63, 99.3 and 63.37% in the presence of, respectively, S. typhimurium TA100, S. typhimurium TA1538 and S. typhimurium TA104 strains at a concentration of 250 µg/plate after metabolic activation (S9). Antioxidant capacity of the tested extract was evaluated using the enzymatic (xanthine/xanthine oxidase assay) and the nonenzymatic (2,2-diphenyl-1-picrylhydrazyl) system. G extract exhibited high antioxidant activity.

Investigating assumptions of crown archetypes for modelling LiDAR returns

NARCIS (Netherlands)

Calders, K.; Lewis, P.; Disney, M.; Verbesselt, J.; Herold, M.

2013-01-01

LiDAR has the potential to derive canopy structural information such as tree height and leaf area index (LAI), via models of the LiDAR signal. Such models often make assumptions regarding crown shape to simplify parameter retrieval and crown archetypes are typically assumed to contain a turbid

Clinical examination of leucite-reinforced glass-ceramic crowns (Empress) in general practice: a retrospective study.

Science.gov (United States)

Sjögren, G; Lantto, R; Granberg, A; Sundström, B O; Tillberg, A

1999-01-01

The purpose of this study was to retrospectively evaluate leucite reinforced-glass ceramic crowns (Empress) placed in patients who regularly visit general practices. One hundred ten Empress crowns, placed in 29 patients who visited a general practice on a regular basis, were evaluated according to the California Dental Association's (CDA) quality evaluation system. In addition, the occurrence of plaque and certain gingival conditions was evaluated. All crowns were luted with resin composite cement. The mean and median years in function for the crowns were 3.6 and 3.9 years, respectively. Based on the CDA criteria, 92% of the 110 crowns were rated "satisfactory." Eighty-six percent were given the CDA rating "excellent" for margin integrity. Fracture was registered in 6% of the 110 crowns. Of the remaining 103 crowns, the CDA rating excellent was given to 74% for anatomic form, 86% for color, and 90% for surface. No significant differences (P > 0.05) were observed regarding fracture rates between anterior and posterior crowns. With regard to the occurrence of plaque and bleeding on probing, no significant differences (P > 0.05) were observed between the Empress crowns and the controls. Most of the fractured crowns had been placed on molars or premolars. Although the difference between anterior and posterior teeth was not statistically significant with respect to the fracture rates obtained, the number of fractured crowns placed on posterior teeth exceeded that of those placed on anterior teeth. The difference between the fracture rates may have clinical significance, and the risk of fracture has to be taken into consideration when placing crowns on teeth that are likely to be subjected to high stress levels.

Modelling initial mortality of Abies religiosa in a crown fire in Mexico

Directory of Open Access Journals (Sweden)

Salomé Temiño-Villota

2016-04-01

Full Text Available Aim of study: The objectives of this work were to determine which morphological and fire severity variables may help explain the mortality of adult Abies religiosa (Kunth Schltdl. & Cham., to model the probability of this species after being affected by crown fire, and to obtain more elements to classify the sacred fir in terms of fire resistance. This type of studies are relevant to estimate the impact of crown fires on the climax forests that forms this species.Area of study: The burned forest was located in the southern Mexico City, borough.Material and methods: Morphological variables and fire severity indicators were collected for 335 Abies religiosa trees burned by a mixed severity fire. Logistic regression was used to analyze data and develop models that best explained tree mortality.Main results: Survival was 26.9%. The models for height (p≤0.0001, diameter at breast height (p=0.0082, crown length (p≤0.0001 and crown base height (p≤0.0001 were significant, with a negative relationship between each one of these variables and probability of mortality. The significant severity variables were lethal scorch height (p≤0.0001 and crown kill (p≤ 0.0001, which have a direct relationship with probability of mortality.Highlights: This species is moderately fire-resistant. Crown kill ≥ 70% markedly increases mortality. Silvicultural activities such as pruning, thinning and fuel management can reduce the risk of crown fires.

Modelling initial mortality of Abies religiosa in a crown fire in Mexico

Energy Technology Data Exchange (ETDEWEB)

Temiño-Villota, S.; Rodríguez-Trejo, D.A.; Molina Terrén, D.M.; Ryan, K.

2016-07-01

Aim of the study: The objectives of this work were to determine which morphological and fire severity variables may help explain the mortality of adult Abies religiosa (Kunth) Schltdl. & Cham., to model the probability of this species after being affected by crown fire, and to obtain more elements to classify the sacred fir in terms of fire resistance. This type of studies are relevant to estimate the impact of crown fires on the climax forests that forms this species. Area of study: The burned forest was located in the southern Mexico City, borough. Material and methods: Morphological variables and fire severity indicators were collected for 335 Abies religiosa trees burned by a mixed severity fire. Logistic regression was used to analyze data and develop models that best explained tree mortality. Main results: Survival was 26.9%. The models for height (p≤0.0001), diameter at breast height (p=0.0082), crown length (p≤0.0001) and crown base height (p≤0.0001) were significant, with a negative relationship between each one of these variables and probability of mortality. The significant severity variables were lethal scorch height (p≤0.0001) and crown kill (p≤ 0.0001), which have a direct relationship with probability of mortality. Highlights: This species is moderately fire-resistant. Crown kill ≥ 70% markedly increases mortality. Silvicultural activities such as pruning, thinning and fuel management can reduce the risk of crown fires. (Author)

The clinical significance of gall-bladder non-visualization in cholescintigraphy of patients with choledochal cysts

International Nuclear Information System (INIS)

Kao Panfu; Huang Miauju; Tzen Kaiyuan; You Dongling; Liaw Yunfan

1996-01-01

Intravenous radionuclide cholescintigraphy (IVRC) provides a very specific picture for choledochal cysts. However, the clinical significance of the non-visualization of the gall-bladder (GB) activity in these cases is unclear. In this study, we reviewed 27 patients with choledochal cysts who underwent IVRC within 7 days prior to operation and correlated the GB findings on IVRC with the histopathological results. In 18 of the 27 patients (66.7%), there was non-visualization of the GB at 4 h post injection. Among these, two had histopathological features of acute cholecystitis (AC), 11 had chronic cholecystitis (CC), and five had normal GBs. In the other nine patients with visualization of the GB, there were five cases of CC and four normal GBs. If we apply the finding of non-visualization of the GB at 4 h post injection as the criterion for the diagnosis of AC, the diagnostic accuracy was only 40.7% (11/27). We concluded that: (1) GB disease (AC and CC) was common (66.7%: 7.4% and 59.3% respectively) in choledochal cyst patients. (2) Non-visualization of the GB on IVRC did not necessarily indicate AC in choledochal cyst cases, and the diagnostic accuracy was low. (3) GB disease is not the only cause of GB non-visualization on IVRC. A huge choledochal cyst causing a mass or reservoir effect may be a cause of GB compression and result in non-visualization of the GB. (orig.). With 3 figs., 3 tabs

Impacts of Mechanical Macrophyte Removal Devices on Sediment Scouring in Littoral Habitats: II. Experimental Operation in the Littoral Zone of Eau Galle Reservoir, Wisconsin

National Research Council Canada - National Science Library

James, William F; Wright, David I; Barko, John W; Eakin, Harry L

2006-01-01

... in Eau Galle Reservoir, Wisconsin. Mechanical macrophyte removal devices are an attractive, low-cost means of removing macrophytes in specific areas without herbicides or repeated mechanical harvesting...

Unique case of a geminated supernumerary tooth with trifid crown

International Nuclear Information System (INIS)

Ather, Amber; Ather, Hunaiza; Sheth, Sanket Milan; Muliya, Vidya Saraswathi

2012-01-01

Gemination, a relatively uncommon dental anomaly, is characterized by its peculiar representation as a tooth with a bifid crown and a common root and root canal. It usually occurs in primary dentition. To come across gemination in a supernumerary tooth is a rare phenomenon. The purpose of this paper is to present a unique case of hyperdontia wherein gemination in an impacted supernumerary tooth resulted in a trifid crown unlike the usual bifid crown. The role of conventional radiographs as well as computed tomography, to accurately determine the morphology and spatial location, and to arrive at a diagnosis, is also emphasized in this paper.

Treatment Recommendations for Single-Unit Crowns: Findings from The National Dental Practice-Based Research Network

Science.gov (United States)

McCracken, Michael S.; Louis, David R.; Litaker, Mark S.; Minyé, Helena M.; Mungia, Rahma; Gordan, Valeria V.; Marshall, Don G.; Gilbert, Gregg H.

2016-01-01

Background Objectives were to: (1) quantify practitioner variation in likelihood to recommend a crown; and (2) test whether certain dentist, practice, and clinical factors are significantly associated with this likelihood. Methods Dentists in the National Dental Practice-Based Research Network completed a questionnaire about indications for single-unit crowns. In four clinical scenarios, practitioners ranked their likelihood of recommending a single-unit crown. These responses were used to calculate a dentist-specific “Crown Factor” (CF; range 0–12). A higher score implies a higher likelihood to recommend a crown. Certain characteristics were tested for statistically significant associations with the CF. Results 1,777 of 2,132 eligible dentists responded (83%). Practitioners were most likely to recommend crowns for teeth that were fractured, cracked, endodontically-treated, or had a broken restoration. Practitioners overwhelmingly recommended crowns for posterior teeth treated endodontically (94%). Practice owners, Southwest practitioners, and practitioners with a balanced work load were more likely to recommend crowns, as were practitioners who use optical scanners for digital impressions. Conclusions There is substantial variation in the likelihood of recommending a crown. While consensus exists in some areas (posterior endodontic treatment), variation dominates in others (size of an existing restoration). Recommendations varied by type of practice, network region, practice busyness, patient insurance status, and use of optical scanners. Practical Implications Recommendations for crowns may be influenced by factors unrelated to tooth and patient variables. A concern for tooth fracture -- whether from endodontic treatment, fractured teeth, or large restorations -- prompted many clinicians to recommend crowns. PMID:27492046

Stress and Reliability Analysis of a Metal-Ceramic Dental Crown

Science.gov (United States)

Anusavice, Kenneth J; Sokolowski, Todd M.; Hojjatie, Barry; Nemeth, Noel N.

1996-01-01

Interaction of mechanical and thermal stresses with the flaws and microcracks within the ceramic region of metal-ceramic dental crowns can result in catastrophic or delayed failure of these restorations. The objective of this study was to determine the combined influence of induced functional stresses and pre-existing flaws and microcracks on the time-dependent probability of failure of a metal-ceramic molar crown. A three-dimensional finite element model of a porcelain fused-to-metal (PFM) molar crown was developed using the ANSYS finite element program. The crown consisted of a body porcelain, opaque porcelain, and a metal substrate. The model had a 300 Newton load applied perpendicular to one cusp, a load of 30ON applied at 30 degrees from the perpendicular load case, directed toward the center, and a 600 Newton vertical load. Ceramic specimens were subjected to a biaxial flexure test and the load-to-failure of each specimen was measured. The results of the finite element stress analysis and the flexure tests were incorporated in the NASA developed CARES/LIFE program to determine the Weibull and fatigue parameters and time-dependent fracture reliability of the PFM crown. CARES/LIFE calculates the time-dependent reliability of monolithic ceramic components subjected to thermomechanical and/Or proof test loading. This program is an extension of the CARES (Ceramics Analysis and Reliability Evaluation of Structures) computer program.

Crown sealing and buckling instability during water entry of spheres

KAUST Repository

Marston, J. O.

2016-04-05

We present new observations from an experimental investigation of the classical problem of the crown splash and sealing phenomena observed during the impact of spheres onto quiescent liquid pools. In the experiments, a 6 m tall vacuum chamber was used to provide the required ambient conditions from atmospheric pressure down to of an atmosphere, whilst high-speed videography was exploited to focus primarily on the above-surface crown formation and ensuing dynamics, paying particular attention to the moments just prior to the surface seal. In doing so, we have observed a buckling-type azimuthal instability of the crown. This instability is characterised by vertical striations along the crown, between which thin films form that are more susceptible to the air flow and thus are drawn into the closing cavity, where they atomize to form a fine spray within the cavity. To elucidate to the primary mechanisms and forces at play, we varied the sphere diameter, liquid properties and ambient pressure. Furthermore, a comparison between the entry of room-temperature spheres, where the contact line pins around the equator, and Leidenfrost spheres (i.e. an immersed superheated sphere encompassed by a vapour layer), where there is no contact line, indicates that the buckling instability appears in all crown sealing events, but is intensified by the presence of a pinned contact line. © 2016 Cambridge University Press.

Biology and control of the raspberry crown borer (Lepidoptera: Sesiidae).

Science.gov (United States)

McKern, Jacquelyn A; Johnson, Donn T; Lewis, Barbara A

2007-04-01

This study explored the biology of raspberry crown borer, Pennisetia marginata (Harris) (Lepidoptera: Sesiidae), in Arkansas and the optimum timing for insecticide and nematode applications. The duration of P. marginata's life cycle was observed to be 1 yr in Arkansas. Insecticide trials revealed that bifenthrin, chlorpyrifos, imidacloprid, metaflumizone, and metofluthrin efficacy were comparable with that of azinphosmethyl, the only labeled insecticide for P. marginata in brambles until 2005. Applications on 23 October 2003 for plots treated with bifenthrin, chlorpyrifos, and azinphosmethyl resulted in >88% reduction in larvae per crown. Applications on 3 November 2004 of metaflumizone, metofluthrin, and bifenthrin resulted in >89% reduction in larvae per crown. Applications on 7 April 2005 for metofluthrin, imidacloprid, bifenthrin, metaflumizone, and benzoylphenyl urea resulted in >64% reduction in the number of larvae per crown. Applications on 6 May 2004 did not reduce larval numbers. The optimum timing for treatments was found to be between October and early April, before the larvae tunneled into the crowns of plants. Applying bifenthrin with as little as 468 liters water/ha (50 gal/acre) was found to be as effective against larvae as higher volumes of spray. Nematode applications were less successful than insecticides. Nematode applications of Steinernemafeltiae, Steinernema carpocapsae, and Heterorhabditis bacteriophora reduced larvae counts per plant by 46, 53, and 33%, respectively.

An in-vitro investigation of the accuracy of fit of Procera and Empress crowns.

Science.gov (United States)

Fleming, Garry J R; Dobinson, Marie M; Landini, Gabriel; Harris, Jonathan J

2005-09-01

The current study aimed to investigate the accuracy of fit and the reproducibility of inner crown profile for two types of high strength ceramics, IPS Empress and Procera. Procera and Empress crowns with four different morphologies were cemented to dies using zinc phosphate dental cement. Vertical and horizontal sections were made through each of the crown/die preparations and images of the vertical sections were compared for curvature reproduction by alignment using image processing. Measurements were made on horizontal sections to determine cement layer thickness. Alignment of the crowns using image analysis identified quantifiable variations in the inner surface profile compared with the outer surface of the die. The largest differences occurred from the cusp tips to the occlusal adaptation area and differences in surface profile were less pronounced for Procera than Empress crowns. Marginal gap varied independently of ceramic or internal crown shape from 7-529 microm for Procera and 26-548 microm for Empress. IPS Empress has a superior ability to reproduce the inner surface profile of the crown morphologies investigated compared with Procera. The reduced reproduction of surface profile was associated with an increased cement thickness at the occlusal contact area that may inadvertently lead to failure of the crowns functional characteristics.

The aesthetic treatment for anterior teeth with lost crown by endorestoration

Directory of Open Access Journals (Sweden)

Nanik Zubaidah

2009-06-01

Full Text Available Background: The aesthetic has an important role in social life, especially the anterior teeth. The aesthetic abnormality of anterior teeth i.e. discoloration, malpotition or the anterior teeth with crown damage for more than one third or all part of crown is lost due to caries or other causes, will influence its appearance especially during smile. Purpose: The aim of this case report, therefore, is to show how teeth with clinical crown lost or only the root left still can be treated by endorestoration treatment in order to reconstruct the shape and function of the teeth similar to the original ones. Case: Female 52 years old with the lost crown of anterior teeth. The patient did not want her teeth to be extracted. Case Management: The abnormality of these teeth are still able to be reconstructed by endorestoration i.e. endodontic treatment with post and core insertion in the root canal will increase its retention and recovery by the porcelain crown fused to metal to recover the original formation and aesthetic and thus has the normal refunction. The treatment, it improve the confidence of the patient, and also can function normally. The patient did not feel pain. Ronsenography showed the periapical lesion diminished, the neighbor gingival was going better in both function and color. Conclusion: Endorestoration treatment on the anterior teeth with lost crown could recover the normal function, dental aesthetic and self confidence.

A semi-empirical model for predicting crown diameter of cedrela ...

African Journals Online (AJOL)

A semi-empirical model relating age and breast height has been developed to predict individual tree crown diameter for Cedrela odorata (L) plantation in the moist evergreen forest zones of Ghana. The model was based on field records of 269 trees, and could determine the crown cover dynamics, forecast time of canopy ...

Incorporating crown dimensions into stem height and basal area for ...

African Journals Online (AJOL)

These increment models, with and without crown dimension were fitted to a modelling data set and the statistical significance of each of the crown dimensions was examined. All the models were then compared for predictive ability using an independent validation data set. The results obtained were similar for both the total ...

Forest insects and diseases in Kouchibouguac National Park in 1994. Technical note No. 306

Energy Technology Data Exchange (ETDEWEB)

Lemieux, G.R.

1995-11-01

Personnel of the Forest Insect and Disease Survey regularly survey national parks for forest insect and disease conditions. This document presents some of the conditions encountered in Kouchibouguac National Park in 1992, including balsam twig aphids, gypsy moth, whitespotted sawyer bettle, white pine weevil, frost damage, Eastern tent caterpiller, uglynest caterpillar, hypoxylon canker, spruce budmoth, Eastern spruce gall adelgid, and other pests encountered.

Forest insects and diseases in Kouchibouguac National Park in 1993. Technical note No. 295

Energy Technology Data Exchange (ETDEWEB)

Lemieux, G.R.

1994-01-01

Personnel of the Forest Insect and Disease Survey regularly survey national parks for forest insect and disease conditions. This document presents some of the conditions encountered in Kouchibouguac National Park in 1992, including balsam twig aphids, gypsy moth, whitespotted sawyer bettle, white pine weevil, frost damage, Eastern tent caterpiller, uglynest caterpillar, hypoxylon canker, spruce budmoth, Eastern spruce gall adelgid, and other pests encountered.

[Effects of repeated firing on microleakage of selective laser melting ceramic crowns].

Science.gov (United States)

Zhong, Qun; Peng, Yan; Wu, Xue-Ying; Weng, Jia-Wei

2016-12-01

To investigate the effects of repeated firing on microleakage of selective laser melting ceramic crowns. Fifty molars were randomly divided into 2 groups (25 teeth in each group). Teeth in group A received a chamfer finish line preparation, whereas teeth in group B received a shoulder finish line. After SLM metal crowns were fabricated, all the crowns received initial oxidation step, opaque firing, dentin firing and glaze firing, then crowns in each group were randomly divided into 5 sub-groups according to different time of clinical firings. Glass ionomer was applied for bonding. After 5000 thermocycles ranging from 5degrees centigrade to 55degrees centigrade, all the specimens was evaluated by dye penetration and then microleakage was examined under light microscopy. The data were analyzed with SPSS 20.0 software package. Microleakage between all specimens of group A were not statistically significant (P>0.05) whereas that of group B were statistically significant (P<0.05); After the fifth time of clinical firing, microleakage of specimens in group B(B5) were significantly higher than that of group A(A5). Repeated firings had no significant influence on marginal microleakage of SLM ceramic crowns whereas the crowns of chamfer finish lines result in better clinical performance after repeated firings.

Earth Pressure on Tunnel Crown

DEFF Research Database (Denmark)

Andersen, Lars

Two different analyses have been carried out in order to find the vertical earth pressure, or overburden pressure, at the crown of a tunnel going through a dike. Firstly, a hand calculation is performed using a simple dispersion of the stresses over depth. Secondly, the finite‐element program...

Wave Forces on Crown Walls

DEFF Research Database (Denmark)

Pedersen, Jan; Burcharth, H. F.

1993-01-01

This paper presents some of the results from a large parametric laboratory study including more than 200 long-duration model tests. The study addresses both the wave forces imposed on the breakwater crown wall as well as the performance of the structure in reducing the wave overtopping. The testing...

[An in vitro study of the fracture strength of tooth preparations for Empress 2 veneers and crowns and mandibular incisors restored with Empress 2 veneers and crowns].

Science.gov (United States)

Wei, Xue; Li, Yan

2009-12-01

To compare the fracture resistance of mandibular incisors' preparations for veneers and crowns, mandibular incisors restored with Empress 2 veneers and crowns. 50 human mandibular incisors were randomly divided into five groups. Each group consisted of ten teeth and the treatment obtained as follows: A, tooth preparations for veneers; B, tooth preparations for crowns; C, teeth restored with veneers; D, teeth restored with crowns; E, untreated group. The teeth received standardized preparation and the restorations were manufactured with Empress 2 system and cemented with resin luting agent. The fracture resistances of teeth were measured by Instron universal testing machine and statistically analyzed with one-way ANOVA. The fracture resistances of A, B, C, D, E were (576.11 +/- 91.53), (204.13 +/- 85.88), (451.50 +/- 116.81), (386.16 +/- 117.75) and (566.05 +/- 121.37) N, respectively. The statistical analysis demonstrated significant differences between five groups. There were no significant differences between group A and E, group C and D. Tooth preparations for veneers did not significantly reduce the fracture resistance of mandibular incisor. The fracture resistance of teeth restored with Empress 2 veneers and crowns did not significantly differ from each other.

CROWN-LEVEL TREE SPECIES CLASSIFICATION USING INTEGRATED AIRBORNE HYPERSPECTRAL AND LIDAR REMOTE SENSING DATA

Directory of Open Access Journals (Sweden)

Z. Wang

2018-05-01

Full Text Available Mapping tree species is essential for sustainable planning as well as to improve our understanding of the role of different trees as different ecological service. However, crown-level tree species automatic classification is a challenging task due to the spectral similarity among diversified tree species, fine-scale spatial variation, shadow, and underlying objects within a crown. Advanced remote sensing data such as airborne Light Detection and Ranging (LiDAR and hyperspectral imagery offer a great potential opportunity to derive crown spectral, structure and canopy physiological information at the individual crown scale, which can be useful for mapping tree species. In this paper, an innovative approach was developed for tree species classification at the crown level. The method utilized LiDAR data for individual tree crown delineation and morphological structure extraction, and Compact Airborne Spectrographic Imager (CASI hyperspectral imagery for pure crown-scale spectral extraction. Specifically, four steps were include: 1 A weighted mean filtering method was developed to improve the accuracy of the smoothed Canopy Height Model (CHM derived from LiDAR data; 2 The marker-controlled watershed segmentation algorithm was, therefore, also employed to delineate the tree-level canopy from the CHM image in this study, and then individual tree height and tree crown were calculated according to the delineated crown; 3 Spectral features within 3 × 3 neighborhood regions centered on the treetops detected by the treetop detection algorithm were derived from the spectrally normalized CASI imagery; 4 The shape characteristics related to their crown diameters and heights were established, and different crown-level tree species were classified using the combination of spectral and shape characteristics. Analysis of results suggests that the developed classification strategy in this paper (OA = 85.12 %, Kc = 0.90 performed better than Li

Influence of cement film thickness on the retention of implant-retained crowns.

Science.gov (United States)

Mehl, Christian; Harder, Sönke; Steiner, Martin; Vollrath, Oliver; Kern, Matthias

2013-12-01

The main goal of this study was to establish a new, high precision procedure to evaluate the influence of cement film thickness on the retention of cemented implant-retained crowns. Ninety-six tapered titanium abutments (6° taper, 4.3 mm diameter, Camlog) were shortened to 4 mm. Computer-aided design was used to design the crowns, and selective laser sintering, using a cobalt-chromium alloy, was used to produce the crowns. This method used a focused high-energy laser beam to fuse a localized region of metal powder to build up the crowns gradually. Before cementing, preset cement film thicknesses of 15, 50, 80, or 110 μm were established. Glass ionomer, polycarboxylate, or resin cements were used for cementation. After 3 days storage in demineralized water, the retention of the crowns was measured in tension using a universal testing machine. The cement film thicknesses could be achieved with a high level of precision. Interactions between the factors cement and cement film thickness could be found (p ≤ 0.001). For all cements, crown retention decreased significantly between a cement film thickness of 15 and 50 μm (p ≤ 0.001). At 15 μm cement film thickness, the resin cement was the most retentive cement, followed by the polycarboxylate and then the glass ionomer cement (p ≤ 0.05). The results suggest that cement film thickness has an influence on the retentive strength of cemented implant-retained crowns. © 2013 by the American College of Prosthodontists.

Comparative evaluation of marginal leakage of provisional crowns cemented with different temporary luting cements: In vitro study.

Science.gov (United States)

Arora, Sheen Juneja; Arora, Aman; Upadhyaya, Viram; Jain, Shilpi

2016-01-01

As, the longevity of provisional restorations is related to, a perfect adaptation and a strong, long-term union between restoration and teeth structures, therefore, evaluation of marginal leakage of provisional restorative materials luted with cements using the standardized procedures is essential. To compare the marginal leakage of the provisional crowns fabricated from Autopolymerizing acrylic resin crowns and bisphenol A-glycidyl dimethacrylate (BIS-GMA) resin crowns. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin crowns and BIS-GMA resin crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin (SC-10) crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from BIS-GMA resin crowns (Protemp 4) cemented with different temporary luting cements. Freshly extracted 60 maxillary premolars of approximately similar dimensions were mounted in dental plaster. Tooth reduction with shoulder margin was planned to use a customized handpiece-holding jig. Provisional crowns were prepared using the wax pattern fabricated from computer aided designing/computer aided manufacturing milling machine following the tooth preparation. Sixty provisional crowns were made, thirty each of SC-10 and Protemp 4 and were then cemented with three different luting cements. Specimens were thermocycled, submerged in a 2% methylene blue solution, then sectioned and observed under a stereomicroscope for the evaluation of marginal microleakage. A five-level scale was used to score dye penetration in the tooth/cement interface and the results of this study was analyzed using the Chi-square test, Mann-Whitney U-test, Kruskal-Wallis H-test and the results were statistically significant P provisional crowns cemented with three different luting cements along the axial walls of

Zirconia- versus metal-based, implant-supported abutments and crowns

DEFF Research Database (Denmark)

Hosseini, Mandana

, the selection of restoration materials should be based on proper optical characteristics in addition to biocompatibility and sufficient strength of materials. Abutments and crowns based on zirconia are one of the most recent alternatives to metal abutments and metal-ceramic crowns. To date, only few comparative...... and to estimate long-term biomechanical results of zirconia-based versus metal-based restorations. The aim of study I was to analyse the mode of fracture and number of cyclic loadings until veneering fracture of zirconia-based all-ceramic restorations compared to metal-ceramic restorations. The aim of study II...... was to test the reliability and validity of six aesthetic parameters used at the Copenhagen Dental School to assess the aesthetic outcome of implant-supported restorations. The aims of study III and IV were to compare the influence of different abutment and crown materials on biological, biomechanical...

Influence of structure of crown ethers on their radiation stability

International Nuclear Information System (INIS)

Grigor'ev, E.I.; Myasoedova, T.G.; Nesterov, S.V.; Trakhtenberg, L.I.

1988-01-01

Primary products of γ-radiolysis of crown ethers with the same size of the macrocyclic ring and different substituents were studied by EPR and mass spectrometry. It was shown that introduction of substituents into the polyether ring increases the radiation stability of crown ethers due to intramolecular transfer of energy from the polyether ring to a substituent

[Computer aided design and manufacture of the porcelain fused to metal crown].

Science.gov (United States)

Nie, Xin; Cheng, Xiaosheng; Dai, Ning; Yu, Qing; Hao, Guodong; Sun, Quanping

2009-04-01

In order to satisfy the current demand for fast and high-quality prosthodontics, we have carried out a research in the fabrication process of the porcelain fused to metal crown on molar with CAD/CAM technology. Firstly, we get the data of the surface mesh on preparation teeth through a 3D-optical grating measuring system. Then, we reconstruct the 3D-model crown with the computer-aided design software which was developed by ourselves. Finally, with the 3D-model data, we produce a metallic crown on a high-speed CNC carving machine. The result has proved that the metallic crown can match the preparation teeth ideally. The fabrication process is reliable and efficient, and the restoration is precise and steady in quality.

Increasing the thermopower of crown-ether-bridged anthraquinones

Science.gov (United States)

Ismael, Ali K.; Grace, Iain; Lambert, Colin J.

2015-10-01

We investigate strategies for increasing the thermopower of crown-ether-bridged anthraquinones. The novel design feature of these molecules is the presence of either (1) crown-ether or (2) diaza-crown-ether bridges attached to the side of the current-carrying anthraquinone wire. The crown-ether side groups selectively bind alkali-metal cations and when combined with TCNE or TTF dopants, provide a large phase-space for optimising thermoelectric properties. We find that the optimum combination of cations and dopants depends on the temperature range of interest. The thermopowers of both 1 and 2 are negative and at room temperature are optimised by binding with TTF alone, achieving thermpowers of -600 μV K-1 and -285 μV K-1 respectively. At much lower temperatures, which are relevant to cascade coolers, we find that for 1, a combination of TTF and Na+ yields a maximum thermopower of -710 μV K-1 at 70 K, whereas a combination of TTF and Li+ yields a maximum thermopower of -600 μV K-1 at 90 K. For 2, we find that TTF doping yields a maximum thermopower of -800 μV K-1 at 90 K, whereas at 50 K, the largest thermopower (of -600 μV K-1) is obtain by a combination TTF and K+ doping. At room temperature, we obtain power factors of 73 μW m-1 K-2 for 1 (in combination with TTF and Na+) and 90 μW m-1 K-2 for 2 (with TTF). These are higher or comparable with reported power factors of other organic materials.We investigate strategies for increasing the thermopower of crown-ether-bridged anthraquinones. The novel design feature of these molecules is the presence of either (1) crown-ether or (2) diaza-crown-ether bridges attached to the side of the current-carrying anthraquinone wire. The crown-ether side groups selectively bind alkali-metal cations and when combined with TCNE or TTF dopants, provide a large phase-space for optimising thermoelectric properties. We find that the optimum combination of cations and dopants depends on the temperature range of interest. The

Direct composite restoration of permanent anterior teeth uncomplicated crown fractures

Directory of Open Access Journals (Sweden)

Ashley Evans Nicholas

2018-01-01

Full Text Available An uncomplicated crown fracture is a fracture that involves only the tooth enamel or the dentin and tooth enamel without any damage or exposure to the pulp. Crown fracture of the anterior teeth usually caused by traumatic forces such as falls, accidents, violence, or sports activities. Traumatic injuries of the oral region frequently involve the anterior teeth, especially maxillary incisors due to the anatomic factors which may affect the functional and aesthetical values of the teeth. The objective of this literature study was to know more about uncomplicated crown fracture of the anterior teeth and its restoration. This research was a literature study performed by researching, highlighting various interesting facts and compiling the relevant published journals. The most common and ideal direct restoration of the anterior teeth was the composite resin restoration. The anterior teeth restoration was considered to be a complex and challenging case to solves due to the fact that besides reconstructing the tooth and regaining the function, the aesthetical aspect was also becoming the main objectives. The permanent anterior teeth uncomplicated crown fracture was the most common case of tooth fractures which was mainly caused by traumatic injuries such as falls, accidents, excessive forces, violence, and also sports activities. Dental injuries of the anterior teeth also affected the aesthetical properties and the function of the tooth. Composite resin restoration was able to performed directly on the permanent anterior teeth uncomplicated crown fracture.

A new genus and species of gall midge (Diptera, Cecidomyiidae associated with Parkia pendula (Fabaceae, Mimosoideae Um novo gênero e espécie de mosquito galhador (Diptera: Cecidomyiidae associado com Parkia pendula (Fabaceae, Mimosoideae

Directory of Open Access Journals (Sweden)

Valéria Cid Maia

2006-03-01

Full Text Available Parkiamyia paraensis, a new genus and species of Cecidomyiidae that induces galls on Parkia pendula is described (larva, pupa, male,female and gall based on material from Pará (Brazil.Parkiamyia paraensis, um novo gênero e espécie de Cecidomyiidae é descrita (larva, pupa, macho e fêmea com base em material do Pará (Brasil.

Morphological and molecular characterization of Fusarium. solani and F. oxysporum associated with crown disease of oil palm.

Science.gov (United States)

Hafizi, R; Salleh, B; Latiffah, Z

2013-01-01

Crown disease (CD) is infecting oil palm in the early stages of the crop development. Previous studies showed that Fusarium species were commonly associated with CD. However, the identity of the species has not been resolved. This study was carried out to identify and characterize through morphological approaches and to determine the genetic diversity of the Fusarium species. 51 isolates (39%) of Fusarium solani and 40 isolates (31%) of Fusarium oxysporum were recovered from oil palm with typical CD symptoms collected from nine states in Malaysia, together with samples from Padang and Medan, Indonesia. Based on morphological characteristics, isolates in both Fusarium species were classified into two distinct morphotypes; Morphotypes I and II. Molecular characterization based on IGS-RFLP analysis produced 27 haplotypes among the F. solani isolates and 33 haplotypes for F. oxysporum isolates, which indicated high levels of intraspecific variations. From UPGMA cluster analysis, the isolates in both Fusarium species were divided into two main clusters with the percentage of similarity from 87% to 100% for F. solani, and 89% to 100% for F. oxysporum isolates, which was in accordance with the Morphotypes I and II. The results of the present study indicated that F. solani and F. oxysporum associated with CD of oil palm in Malaysia and Indonesia were highly variable.

A novel approach to internal crown characterization for coniferous tree species classification

Science.gov (United States)

Harikumar, A.; Bovolo, F.; Bruzzone, L.

2016-10-01

The knowledge about individual trees in forest is highly beneficial in forest management. High density small foot- print multi-return airborne Light Detection and Ranging (LiDAR) data can provide a very accurate information about the structural properties of individual trees in forests. Every tree species has a unique set of crown structural characteristics that can be used for tree species classification. In this paper, we use both the internal and external crown structural information of a conifer tree crown, derived from a high density small foot-print multi-return LiDAR data acquisition for species classification. Considering the fact that branches are the major building blocks of a conifer tree crown, we obtain the internal crown structural information using a branch level analysis. The structure of each conifer branch is represented using clusters in the LiDAR point cloud. We propose the joint use of the k-means clustering and geometric shape fitting, on the LiDAR data projected onto a novel 3-dimensional space, to identify branch clusters. After mapping the identified clusters back to the original space, six internal geometric features are estimated using a branch-level analysis. The external crown characteristics are modeled by using six least correlated features based on cone fitting and convex hull. Species classification is performed using a sparse Support Vector Machines (sparse SVM) classifier.

Galling Resistance of An Anti-friction Coating on Oil-casing Couplings

Directory of Open Access Journals (Sweden)

Zhao Shilong

2016-01-01

Full Text Available Generally, oil tubing and casing connections made of carbon steel are connected using phosphate-treated coupling, but high-grade steel oil casing can only be connected using copperized couplings, which are expensive and result in environmental pollution. A new anti-friction coating was prepared by adding suitable amounts of nanoparticles into a highly pure and concentrated nano-copper suspension, with epoxy resin as a binder. Laboratory tests and full-scale make and break tests show that a heterogeneous copper layer is formed after curing when this coating was applied to the phosphate layer surface of couplings made of P110 and P110S casings. This can greatly reduce the make-up torque of casing thread, and can effectively improve or even eliminate galling of high-grade steel oil casing.

Impact of a drop onto a wetted wall: description of crown formation and propagation

Science.gov (United States)

Roisman, I. V.; Tropea, C.

2002-12-01

The impact of a drop onto a liquid film with a relatively high impact velocity, leading to the formation of a crown-like ejection, is studied theoretically. The motion of a kinematic discontinuity in the liquid film on the wall due to the drop impact, the formation of the upward jet at this kinematic discontinuity and its elevation are analysed. Four main regions of the drop and film are considered: the perturbed liquid film on the wall inside the crown, the unperturbed liquid film on the wall outside the crown, the upward jet forming a crown, and the free rim bounding this jet. The theory of Yarin & Weiss (1995) for the propagation of the kinematic discontinuity is generalized here for the case of arbitrary velocity vectors in the inner and outer liquid films on the wall. Next, the mass, momentum balance and Bernoulli equations at the base of the crown are considered in order to obtain the velocity and the thickness of the jet on the wall. Furthermore, the dynamic equations of motion of the crown are developed in the Lagrangian form. An analytical solution for the crown shape is obtained in the asymptotic case of such high impact velocities that the surface tension and the viscosity effects can be neglected in comparison to inertial effects. The edge of the crown is described by the motion of a rim, formed due to the surface tension.

Experiments on the breakup of drop-impact crowns by Marangoni holes

KAUST Repository

Aljedaani, Abdulrahman Barakat

2018-04-04

We investigate experimentally the breakup of the Edgerton crown due to Marangoni instability when a highly viscous drop impacts on a thin film of lower-viscosity liquid, which also has different surface tension than the drop liquid. The presence of this low-viscosity film modifies the boundary condition, giving effective slip to the drop along the solid substrate. This allows the high-viscosity drop to form a regular bowl-shaped crown, which rises vertically away from the solid and subsequently breaks up through the formation of a multitude of Marangoni holes. Previous experiments have proposed that the breakup of the crown results from a spray of fine droplets ejected from the thin low-viscosity film on the solid, e.g. Thoroddsen et al. (J. Fluid Mech., vol. 557, 2006, pp. 63–72). These droplets can hit the inner side of the crown forming spots with lower surface tension, which drives a thinning patch leading to the hole formation. We test the validity of this assumption with close-up imaging to identify individual spray droplets, to show how they hit the crown and their lower surface tension drive the hole formation. The experiments indicate that every Marangoni-driven patch/hole is promoted by the impact of such a microdroplet. Surprisingly, in experiments with pools of higher surface tension, we also see hole formation. Here the Marangoni stress changes direction and the hole formation looks qualitatively different, with holes and ruptures forming in a repeatable fashion at the centre of each spray droplet impact. Impacts onto films of the same liquid, or onto an immiscible liquid, do not in general form holes. We furthermore characterize the effects of drop viscosity and substrate-film thickness on the overall evolution of the crown. We also measure the three characteristic velocities associated with the hole formation: i.e. the Marangoni-driven growth of the thinning patches, the rupture speed of the resulting thin films inside these patches and finally the

Kinetically inert lanthanide complexes as reporter groups for binding of potassium by 18-crown-6

DEFF Research Database (Denmark)

Junker, Anne Kathrine Ravnsborg; Tropiano, Manuel; Faulkner, Stephen

2016-01-01

in a copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) “click” reaction with azide-functionalized crown ethers. The resulting complexes were investigated using NMR and optical methods. Titrations with potassium chloride in methanol observing the sensititzed europium- and terbium-centered emissions were......-centered emission to report on the binding of potassium in an 18-crown-6 binding pocket. The responsive systems were made by linking a crown ether to a kinetically inert lanthanide binding pocket using a molecular building block approach. Specifically, an alkyne-appended Ln.DO3A was used as a building block...... used to investigate the response of the systems. The molecular reporters based on aliphatic crown ethers were found to have strongly inhibited binding of potassium, while the benzo-18-crown-6 derived systems had essentially the same association constants as the native crown ethers. The shape...

Effect of Crystallization Firing on Marginal Gap of CAD/CAM Fabricated Lithium Disilicate Crowns.

Science.gov (United States)

Gold, Steven A; Ferracane, Jack L; da Costa, Juliana

2018-01-01

To evaluate the marginal gaps of CAD/CAM (CEREC 3) produced crowns made from leucite-reinforced glass-ceramic (IPS Empress CAD) blocks (LG), and lithium-disilicate (IPS e.max CAD) blocks before (LD-B), and after (LD-A) crystallization firing. A human molar tooth (#19) was mounted with adjacent teeth on a typodont and prepared for a full-coverage ceramic crown. The typodont was assembled in the mannequin head to simulate clinical conditions. After tooth preparation 15 individual optical impressions were taken by the same operator using titanium dioxide powder and a CEREC 3 camera per manufacturer's instructions. One operator designed and machined the crowns in leucite-reinforced glass-ceramic blocks (n = 5) and lithium-disilicate blocks (n = 10) using the CEREC 3 system. The crowns were rigidly seated on the prepared tooth, and marginal gaps (μm) were measured with an optical microscope (500×) at 12 points, 3 on each of the M, B, D, and L surfaces of the leucite-reinforced glass-ceramic crowns and the lithium-disilicate crowns before and after crystallization firing. Results were analyzed by two-way ANOVA followed by a Tukey's post hoc multiple comparison test (α = 0.05). The overall mean marginal gaps (μm) for the crowns evaluated were: LG = 49.2 ± 5.5, LD-B = 42.9 ± 12.2, and LD-A = 57.2 ± 16.0. The marginal gaps for LG and LD-B were not significantly different, but both were significantly less than for LD-A. The type of ceramic material did not affect the marginal gap of CAD/CAM crowns. The crystallization firing process required for lithium-disilicate crowns resulted in a significant increase in marginal gap size, likely due to shrinkage of the ceramic during the crystallization process. The marginal gap of CAD/CAM-fabricated lithium disilicate crowns increases following crystallization firing. The marginal gap still remains within clinically acceptable parameters. © 2017 by the American College of Prosthodontists.

Evaluation of the Effect of Surgical Crown Lengthening on Periodontal Parameters

Directory of Open Access Journals (Sweden)

Farzane Vaziri

2015-09-01

Full Text Available Background: Surgical crown lengthening is needed for teeth with subgingival caries, fractured teeth, insufficient crown length, and deep subgingival margin of failed restorations. Since there is no agreement on the effects of crown lengthening surgery on gingival parameters, the purpose of this study was to evaluate periodontal parameters in patients who needed crown lengthening surgery. Methods: Twenty patients who had healthy periodontium and needed surgical crown lengthening were included in this study. After professional dental cleaning, gingival parameters including gingival index (GI, probing depth (PD, bone level (BL, and transsulcular probing (TSP were recorded in interproximal and keratinized gingiva (KG in mid buccal portion. The patients were evaluated one and three months after the surgery. Results: After one and three months of the surgery, the amount of PD reduced from 2.32 mm to 1.25 mm and 1.17 mm, respectively (P=0.001. The mean of BL reduction was 0.88 mm after one month (P=0.001, but there was no reduction between 1 month and 3 months. Amounts of KG at baseline andone month later were 4.2 mm and 2.9 mm, respectively (P=0.001, and remained at the same level up to three months. TSP significantly reduced (from 3.67 mm at baseline to 2.62 mm after 1 month, and to 2.27 mm after 3 months (P=0.001, P=0.005. Conclusion: The present  study suggests that in the presence of good oral hygiene, except BW (biological width, other parameters including PD, BL, KG, and TSP had significant changes after crown lengthening surgery in the period of 1 month and 3 months (P

RAPD markers for screening shoot gall maker (Betousa stylophora Swinhoe tolerant genotypes of amla (Phyllanthus emblica L.

Directory of Open Access Journals (Sweden)

Sethuraman Thilaga

2017-12-01

Full Text Available Phyllanthus emblica Linn. is the most important medicinally useful tree crop in Asian Subcontinent and is severely infested by Betousa stylophora Swinhoe, known as shoot gall maker (SGM. This pest tunnels the shoots of seedlings and actively growing branches of trees and develops gall, leading to stunted growth, unusual branching and death of actively growing shoots. Our study revealed that trees possessing smooth bark were free from the attack of this pest than those with rough bark surface. Unfortunately, this character is not detectable either at seedling stage or during early growth of trees in the orchard. RAPD genetic fingerprinting of trees possessing smooth and rough bark revealed distinguishable and highly reproducible DNA banding pattern between the two genotypes. Of the 20 RAPD primers tested, five of them produced distinguishable RAPD bands between rough and smooth barked genotypes of P. emblica. Trees with smooth bark produced five unique RAPD bands with molecular weight ranging from 350 bp to 1500 bp and those with rough bark produced six RAPD bands (350 bp–650 bp to utilize these DNA bands as potential DNA marker for screening tolerant genotypes of this crop against SGM. The utility of this finding in genetic improvement of this tree crop against SGM is discussed.

Clinical Acceptability of the Internal Gap of CAD/CAM PD-AG Crowns Using Intraoral Digital Impressions

Science.gov (United States)

Kim, Tae-Gyung; Kim, Sungtae; Lee, Jae-Hoon

2016-01-01

The purpose of this study was to compare the internal gap between CAD/CAM palladium-silver crowns and cast gold crowns generated from intraoral digital versus conventional impressions and to determine the clinical acceptability. Nickel-chrome master dies were made from the prepared resin tooth with the conventional impression method (n = 40). For ICC (Intraoral, CAD/CAM) group, 10 intraoral digital impressions were made, and 10 CAD/CAM crowns of a PD-AG (palladium-silver) machinable alloy were generated. For IC (Intraoral, Cast) group, 10 gold crowns were cast from ten intraoral digital impressions. For CCC (Conventional, CAD/CAM) group, 10 CAD/CAM PD-AG crowns were made using the conventional impression method. For CC (Conventional, Cast) group, 10 gold crowns were fabricated from 10 conventional impressions. One hundred magnifications of the internal gaps of each crown were measured at 50 points with an optical microscope and these values were statistically analyzed using a two-way analysis of variance (α = 0.05). The internal gap of the intraoral digital impression group was significantly larger than in the conventional impression group (P 0.05). Within the limitations of this in vitro study, crowns from intraoral digital impressions showed larger internal gap values than crowns from conventional impressions. PMID:28018914

Clinical Acceptability of the Internal Gap of CAD/CAM PD-AG Crowns Using Intraoral Digital Impressions

Directory of Open Access Journals (Sweden)

Tae-Gyung Kim

2016-01-01

Full Text Available The purpose of this study was to compare the internal gap between CAD/CAM palladium-silver crowns and cast gold crowns generated from intraoral digital versus conventional impressions and to determine the clinical acceptability. Nickel-chrome master dies were made from the prepared resin tooth with the conventional impression method (n=40. For ICC (Intraoral, CAD/CAM group, 10 intraoral digital impressions were made, and 10 CAD/CAM crowns of a PD-AG (palladium-silver machinable alloy were generated. For IC (Intraoral, Cast group, 10 gold crowns were cast from ten intraoral digital impressions. For CCC (Conventional, CAD/CAM group, 10 CAD/CAM PD-AG crowns were made using the conventional impression method. For CC (Conventional, Cast group, 10 gold crowns were fabricated from 10 conventional impressions. One hundred magnifications of the internal gaps of each crown were measured at 50 points with an optical microscope and these values were statistically analyzed using a two-way analysis of variance (α=0.05. The internal gap of the intraoral digital impression group was significantly larger than in the conventional impression group (P0.05. Within the limitations of this in vitro study, crowns from intraoral digital impressions showed larger internal gap values than crowns from conventional impressions.

Forest insects and diseases in Kouchibouguac National Park in 1992. Technical note No. 275. Annual publication

Energy Technology Data Exchange (ETDEWEB)

Lemieux, G.R.

1993-01-01

Personnel of the Forest Insect and Disease Survey regularly survey national parks for forest insect and disease conditions. This document presents some of the conditions encountered in Kouchibouguac National Park in 1992, including balsam twig aphids, gypsy moth, whitespotted sawyer bettle, white pine weevil, frost damage, Eastern tent caterpiller, uglynest caterpillar, hypoxylon canker, spruce budmoth, Eastern spruce gall adelgid, and other pests encountered.

Evaluation of Blue Gum Chalid Infestation Woodlots in Western Kenya

International Nuclear Information System (INIS)

Otuoma, J.; Muchiri, M.N

2007-01-01

Blue gum chalcid (BGC) Leptocybe invasa is a gall-forming wasp that belongs to the insect order Hymenoptera, family Eulophidae. It attacks a wide range of Eucalyptus species mostly between the seedling stage and five years of age. BGC causes damage to eucalyptus by forming bump-shaped galls on the leaf midribs, petioles and stems.Twisted and knobbed leaves manifest severe infestation. The aim of this study was to establish the spatial distribution of BGC and extent of host plant damage in Eucalyptus woodlots in Western Kenya. The study was carried out in six permanent sampling plots in Eucalyptus woodlots in Busia, Bungoma, Kakamega and Nyando. Trees were assessed for crown damage by estimating and classifying the density of galls on the leaves into four levels of infestation: low (greater than 50% of foliage canopy with galls and no twisted or knobbed leaves), moderate (greater than 50% of foliage with galls and less than 50% of the leaves twisted and knobbed), high (greater than 50% of the leaves twisted and knobbed, galls on the twigs and some twigs deformed and severe (greater than 50% of the twigs deformed and regeneration foliage observed). An evaluation of the pests' infestation and the extent of host plant damage indicated that, 4% of the trees and severe infestation; 5% high; 20% moderate and 70% low. Approximately 1% of trees died as a result of loss of foliage attributable to severe infestation. Other observations from the study were that the severity of BGC infestation tended to decline as trees grew older and BGC infestation retarded tree growth

Crystal structure of cis-anti-cis-dicyclohexane-18-crown-6 acetonitrile disolvate

Directory of Open Access Journals (Sweden)

Alexander Nazarenko

2015-07-01

Full Text Available The title compound (systematic name: cis-anti-cis-2,5,8,15,18,21-hexaoxatricyclo[20.4.0.09,14]hexacosane acetonitrile disolvate, C20H36O6·2CH3CN, crystallizes from an acetonitrile solution of dicyclohexane-18-crown-6 on evaporation. The molecule is arranged around a center of symmetry with half the crown ether molecule and one molecule of acetonitrile symmetry independent. All O—C—C—O torsion angles are gauche while all C—O—C—C angles are trans. The sequence of torsion angles is [(tg+t(tg−t]3; the geometry of oxygen atoms is close to pseudo-D3d with three atoms below and three atoms above the mean plane, with an average deviation of ±0.16 (1 Å from the mean plane. This geometry is identical to that observed in metal ion complexes of dicyclohexane-18-crown-6 but differs significantly from the conformation of a free unsolvated molecule. Each acetonitrile molecule connects to a crown ether molecule via two of its methyl group H atoms (C—H...O. Weaker interactions exist between the third H atom of the acetonitrile methyl group and an O atom of a neighbouring crown ether molecule (C—H...O; and between the N atom of the acetonitrile molecule and a H atom of another neighbouring crown ether molecule. All these intermolecular interactions create a three-dimensional network stabilizing the disolvate.

[Effects of habitat fragmentation on nesting site selection of red-crowned crane].

Science.gov (United States)

Wan, Dongmei; Gao, Wei; Wang, Qiuyu; Wang, Haitao; Liu, Mingyu

2002-05-01

During April and May of 1985, 1995 and 1998, red-crowned crane's nesting and variation of breeding population quantities in Shuangtaihekou National Natural Reserve in Liaoning, and also the habitat fragmentation there were investigated. Associated with previous data of the reserve, red-crowned crane's nesting habitat had been seriously fragmentated into 91 patches from one integrated reed wetland. The area of the smallest patch was 0.37 km2, and the minimum distance of two nests was 304 m. Compared with records of previous data, the minimum area of nesting habitat reduced by 0.72 km2. However, the breeding population quantities of red-crowned crane had maintained at about 30 pairs for a long period. The red-crowned crane adapted to the changed environment by the ecological adaptation strategy of reducing area of nesting habitat.

Influence of different post core materials on the color of Empress 2 full ceramic crowns.

Science.gov (United States)

Ge, Jing; Wang, Xin-zhi; Feng, Hai-lan

2006-10-20

For esthetic consideration, dentin color post core materials were normally used for all-ceramic crown restorations. However, in some cases, clinicians have to consider combining a full ceramic crown with a metal post core. Therefore, this experiment was conducted to test the esthetical possibility of applying cast metal post core in a full ceramic crown restoration. The color of full ceramic crowns on gold and Nickel-Chrome post cores was compared with the color of the same crowns on tooth colored post cores. Different try-in pastes were used to imitate the influence of a composite cementation on the color of different restorative combinations. The majority of patients could not detect any color difference less than DeltaE 1.8 between the two ceramic samples. So, DeltaE 1.8 was taken as the objective evaluative criterion for the evaluation of color matching and patients' satisfaction. When the Empress 2 crown was combined with the gold alloy post core, the color of the resulting material was similar to that of a glass fiber reinforced resin post core (DeltaE = 0.3). The gold alloy post core and the try-in paste did not show a perceptible color change in the full ceramic crowns, which indicated that the color of the crowns might not be susceptible to change between lab and clinic as well as during the process of composite cementation. Without an opaque covering the Ni-Cr post core would cause an unacceptable color effect on the crown (DeltaE = 2.0), but with opaque covering, the color effect became more clinically satisfactory (DeltaE = 1.8). It may be possible to apply a gold alloy post core in the Empress 2 full ceramic crown restoration when necessary. If a non-extractible Ni-Cr post core exists in the root canal, it might be possible to restore the tooth with an Empress 2 crown after covering the labial surface of the core with one layer of opaque resin cement.

Comparative evaluation of marginal leakage of provisional crowns cemented with different temporary luting cements: In vitro study

Directory of Open Access Journals (Sweden)

Sheen Juneja Arora

2016-01-01

Conclusion: The temporary cements with eugenol showed more microleakage than those without eugenol. SC-10 crowns showed more microleakage compared to Protemp 4 crowns. SC-10 crowns cemented with Kalzinol showed maximum microleakage and Protemp 4 crowns cemented with HY bond showed least microleakage.

Crown-Stump Diameter Model for Parkia biglobosa Benth. Species in Makurdi, Benue State, Nigeria

Directory of Open Access Journals (Sweden)

O. Chukwu

2017-07-01

Full Text Available The crown of tree is the centre of physiological activity which gives an indication of the potential photosynthetic capacity on a tree. Though, its measurement remains a challenge in forest inventory task. The ability to predict crown diameter from stump diameter provides an effective technique of obtaining its estimate. This helps in detecting the excessive tree felling than actual requirements and wildlife suitability.The main objective of this study was to develop and test crown diameter prediction models for silvicultural management of naturally grown Parkia biglobosa within the University of Agriculture, Makurdi. Nine 100 m x 100 m temporary sample plots were established using simple random sampling method. Crown diameter and stump diameter were measured in all living P. biglobosa trees with stump diameter ≥10.0 cm. Least square method was used to convert the counted stumps into harvested crown dimension. Three linear and three non-linear models using stump diameter as the exploratory variable were developed and evaluated using the adjusted coefficient of determination (Adj.R2, standard error of estimate (SEE, prediction error sum of squares (PRESS and Akaike information criterion (AIC. The crown-stump diameter relationship was best described by the double logarithmic function with .The result showed that Crown diameter estimation was feasible even when the only information available is stump diameter.The resulting equation was tested for validation with independent data obtained from additional plots and was found to be desirable for estimating the crown diameter for Parkia biglobosa in Makurdi, Benue State, Nigeria.

Crown ether complexes of lanthanoid and actinoid elements. Crystal and molecular structure of Nd(NO/sub 3/)/sub 3/(18-crown-6)

Energy Technology Data Exchange (ETDEWEB)

Bombieri, G; De Paoli, G; Benetollo, F [Consiglio Nazionale delle Ricerche, Padua (Italy). Lab. di Chimica e Tecnologia dei Radioelementi; Cassol, A [Padua Univ. (Italy)

1980-01-01

Nd(NO/sub 3/)/sub 3/.18-Crown-6 crystallizes in the orthorhombic system, space group Pbca with eight molecules in a cell of dimensions a = 15.512(9), b = 21.662(1), c = 12.141(6) A. The structure has been determined by Patterson heavy-atom methods and refined by full-matrix least squares to R = 0.038. The neodymium atom is coordinated by 6 oxygen atoms of the 18-crown-6 unit and by three bidentate nitrate groups; one on the more hindered side of the ring and two on the opposite side.

Crown-of-thorns sea star, Acanthaster cf. solaris, have tissue-characteristic microbiomes with potential roles in health and reproduction.

Science.gov (United States)

Høj, Lone; Levy, Natalie; Baillie, Brett K; Clode, Peta L; Strohmaier, Raphael C; Siboni, Nachshon; Webster, Nicole S; Uthicke, Sven; Bourne, David G

2018-05-04

Outbreaks of coral-eating crown-of-thorns sea stars (CoTS; Acanthaster spp. complex) cause substantial coral loss, hence there is considerable interest in developing prevention and control strategies. We characterised the microbiome of captive CoTS and assessed whether dysbiosis was evident in sea stars during a disease event. Most tissue types had a distinct microbiome. The exception was female gonads, which were highly variable amongst individuals. Male gonads were dominated (>97% of reads) by a single Mollicutes -related OTU. Detailed phylogenetic and microscopy analysis demonstrated the presence of a novel Spiroplasma -related bacterium in the spermatogenic layer. Body wall samples had high relative abundance (43-64% of reads) of spirochetes, likely corresponding to subcuticular symbionts reported from many echinoderms. Tube feet were characterised by Hyphomonadaceae (24-55% of reads). Pyloric caeca microbiomes had high alpha diversity, comprising many taxa commonly found in gastro-intestinal systems. The order Oceanospirillales (genera Endozoicomonas and Kistimonas ) was detected in all tissues. A microbiome shift occurred in diseased individuals, although differences between tissue types were retained. The relative abundance of spirochetes was significantly reduced in diseased individuals. Kistimonas was present in all diseased individuals and significantly associated with diseased tube feet, but its role in disease causation is unknown. While Arcobacter was significantly associated with diseased tissues and Vibrionaceae increased in diversity, no single OTUs were detected in all diseased individuals suggesting opportunistic proliferation of these taxa in this case. This study shows that CoTS have tissue-characteristic bacterial communities and identifies taxa that could play a role in reproduction and host health. IMPORTANCE Coral-eating crown of thorns sea stars (CoTS; Acanthaster spp. complex) are native to the Indo-Pacific, but during periodic population

Conductometric study of reaction kinetics between potassium superoxide and 18-crown-6 in dimethylsulfoxide

International Nuclear Information System (INIS)

Efimova, I.V.; Opejda, I.A.

2000-01-01

Complexing within KO 2 -18-crown-6-solvent, KOH-18-crown-6-solvent and KI-KO 2 -18-crown-6-solvent systems in dimethylsulfoxide was studied by measurement of electrical conductivity. It was shown that time variation of electrical conductivity under the given conditions was described by the Erofeev-Auramy equation, the coefficients of that equation for various systems were determined, time to reach equilibrium state was estimated. Linear dependences of electrical conductivity of KI-KO 2 salt solutions at presence of 18-crown-6 at the state of equilibrium in contrast to the component concentrations were determined [ru

Plant diversity and galling arthropod diversity searching for taxonomic patterns in an animal-plant interaction in the Neotropics Diversidade de plantas e diversidade de artrópodes galhadores procurando padrões taxonômicos numa interação animal-planta nos Neotrópicos

Directory of Open Access Journals (Sweden)

Milton de Souza Mendonça, Jr.

Full Text Available Gall-inducers are a special guild of endophytic herbivores generating distinct structures known as galls. Gallers are species-specific, as the galls they induce: each gall morphotype is unique. The relationship between plants and gallers is close, and some of the hypotheses to explain galling diversity consider plants directly; others do not. Here I review current diversity hypotheses on galls and their hosts, adding ideas on the interpretation of galler host plant data. The example comes from an ongoing standardised inventory of galls and hosts in Rio Grande do Sul (RS state, southern Brazil. The questions addressed here are whether: a galls occur consistently on some plant taxa in different areas, b these taxa are important for vegetation composition, and c taxon size influences galling richness. Families harbouring more gallers are usually the same throughout the Neotropics (Fabaceae, Myrtaceae, and in RS, Asteraceae, which is not unexpected as these are important components of vegetation. Larger plant families have more galls, a pattern driven by Asteraceae. At lower taxonomic levels, the dominance of a few taxa in galler richness («super-hosts» is higher. Mikania and Eugenia , for example, hold much more galls than others in the RS survey.Os galhadores são uma guilda especial de herbívoros endofíticos geradores de estruturas distintas, as galhas. Galhadores são espécie-específicos, como as galhas que induzem: cada morfotipo de galha é único. A relação entre plantas e galhadores é estreita; algumas das hipóteses para explicar a diversidade de galhadores consideram as plantas diretamente; outras não. Aqui são revistas as correntes hipóteses sobre a diversidade de galhadores e suas hospedeiras, adicionando idéias sobre a interpretação de dados dos hospedeiros. Os exemplos advêm de um inventário de galhas no Estado do Rio Grande do Sul (RS, sul do Brasil. As questões aqui são: a as galhas ocorrem consistentemente em

Functional responses and prey-stage preferences of a predatory gall midge and two predacious mites wtih twospotted spider mites, Tetranychus urticae as host

Science.gov (United States)

The twospotted spider mite, Tetranychus urticae (Acari: Tetranychidae), is an important pest of vegetables and other crops. This study was conducted to evaluate and compare the potential role of three commercially available predators, predatory gall midge, Feltiella acarisuga (Vallot) (Diptera: Ceci...

Mandibular molar crown-topography, a biological predisposing ...

African Journals Online (AJOL)

Mandibular molar crown-topography, a biological predisposing factor to development of caries – a post-mortem analysis of 2500 extracted lower permanent molars at the dental centre, University of Benin teaching hospital.

A Reliability Generalization Study of the Marlowe-Crowne Social Desirability Scale.

Science.gov (United States)

Beretvas, S, Natasha; Meyers, Jason L.; Leite, Walter L.

2002-01-01

Conducted a reliability generalization study of the Marlowe-Crowne Social Desirability Scale (D. Crowne and D. Marlowe, 1960). Analysis of 93 studies show that the predicted score reliability for male adolescents was 0.53, and reliability for men's responses was lower than for women's. Discusses the need for further analysis of the scale. (SLD)

Longevity of metal-ceramic crowns cemented with self-adhesive resin cement: a prospective clinical study

Science.gov (United States)

Brondani, Lucas Pradebon; Pereira-Cenci, Tatiana; Wandsher, Vinicius Felipe; Pereira, Gabriel Kalil; Valandro, Luis Felipe; Bergoli, César Dalmolin

2017-04-10

Resin cements are often used for single crown cementation due to their physical properties. Self-adhesive resin cements gained widespread due to their simplified technique compared to regular resin cement. However, there is lacking clinical evidence about the long-term behavior of this material. The aim of this prospective clinical trial was to assess the survival rates of metal-ceramic crowns cemented with self-adhesive resin cement up to six years. One hundred and twenty-nine subjects received 152 metal-ceramic crowns. The cementation procedures were standardized and performed by previously trained operators. The crowns were assessed as to primary outcome (debonding) and FDI criteria. Statistical analysis was performed using Kaplan-Meier statistics and descriptive analysis. Three failures occurred (debonding), resulting in a 97.6% survival rate. FDI criteria assessment resulted in scores 1 and 2 (acceptable clinical evaluation) for all surviving crowns. The use of self-adhesive resin cement is a feasible alternative for metal-ceramic crowns cementation, achieving high and adequate survival rates.

Stochastic Mixed-Effects Parameters Bertalanffy Process, with Applications to Tree Crown Width Modeling

Directory of Open Access Journals (Sweden)

Petras Rupšys

2015-01-01

Full Text Available A stochastic modeling approach based on the Bertalanffy law gained interest due to its ability to produce more accurate results than the deterministic approaches. We examine tree crown width dynamic with the Bertalanffy type stochastic differential equation (SDE and mixed-effects parameters. In this study, we demonstrate how this simple model can be used to calculate predictions of crown width. We propose a parameter estimation method and computational guidelines. The primary goal of the study was to estimate the parameters by considering discrete sampling of the diameter at breast height and crown width and by using maximum likelihood procedure. Performance statistics for the crown width equation include statistical indexes and analysis of residuals. We use data provided by the Lithuanian National Forest Inventory from Scots pine trees to illustrate issues of our modeling technique. Comparison of the predicted crown width values of mixed-effects parameters model with those obtained using fixed-effects parameters model demonstrates the predictive power of the stochastic differential equations model with mixed-effects parameters. All results were implemented in a symbolic algebra system MAPLE.

Tree crown structure indicators in a natural uneven-aged mixed coniferous forest in northeastern Mexico

Science.gov (United States)

Javier Jimenez-Perez; Oscar Aguirre-Calderon; Horst Kramer

2006-01-01

Characterization of tree crown structure provides critical information to assess a variety of ecological conditions for multiple purposes and applications. For biomass growth, for example, tree crowns have basic physiological functions: assimilation, respiration, and transpiration. How tree crowns spatially interact and grow can bring about a seamless landscape of...

[Cervical adaptation of complete cast crowns of various metal alloys, with and without die spacers].

Science.gov (United States)

Stephano, C B; Roselino, R F; Roselino, R B; Campos, G M

1989-01-01

A metallic replica from a dental preparation for crown was used to make 8 class-IV stone dies. The wax patterns for the casting of the crowns were obtained in two conditions: a) from the stone die with no spacer; and b) from the stone die with an acrylic spacer. Thus, 64 metallic crowns were casted, using 4 different alloys: DURACAST (Cu-Al), NICROCAST (Ni-Cr) and DURABOND (Ni-Cr), and gold. The casted crowns were fitted in the metallic replica and measured as to the cervical discrepance of fitting. The results showed that the use of die spacers decreases the clinical discrepancies of fitting of the casted crowns (in a statistically significant level), no matter the metallic alloy employed.

Wavelength selection in the crown splash

Science.gov (United States)

Zhang, Li V.; Brunet, Philippe; Eggers, Jens; Deegan, Robert D.

2010-12-01

The impact of a drop onto a liquid layer produces a splash that results from the ejection and dissolution of one or more liquid sheets, which expand radially from the point of impact. In the crown splash parameter regime, secondary droplets appear at fairly regularly spaced intervals along the rim of the sheet. By performing many experiments for the same parameter values, we measure the spectrum of small-amplitude perturbations growing on the rim. We show that for a range of parameters in the crown splash regime, the generation of secondary droplets results from a Rayleigh-Plateau instability of the rim, whose shape is almost cylindrical. In our theoretical calculation, we include the time dependence of the base state. The remaining irregularity of the pattern is explained by the finite width of the Rayleigh-Plateau dispersion relation. Alternative mechanisms, such as the Rayleigh-Taylor instability, can be excluded for the experimental parameters of our study.

Scalpel Depigmentation and Surgical Crown Lengthening to ...

African Journals Online (AJOL)

level of the apices of the six maxillary anterior teeth. Maxillary canines and ... requires osseous resection surgeries whereas excessive gingival display due to ... this case included complete oral prophylaxis along aesthetic crown lengthening ...

Reversed phase partition chromatographic separation of Gd(III) on poly(Crown Ether) column

International Nuclear Information System (INIS)

Mahanwar, K.R.; Sabale, S.R.

2014-01-01

A simple method has been developed for the separation of Gd(III) in hippuric acid medium by using poly(dibenzo-18-crown-6) as stationary phase. The effect of hippuric acid concentration, different eluting agent, foreign ions etc was studied and the optimum conditions were established. Breakthrough capacity of poly(dibenzo-18-crown-6) for Gd(III) was found to be 0.572 ±0.01 mmolg -1 of crown polymer. The separation of Gd(III) from other elements in multicomponent mixtures has been achieved. The method was extended for determination of Gd(III) in real sample. The method is simple, rapid and selective with good reproducibility (approximately ± 2%). Crown ethers are widely used as complexing agent that can selectively capture metal cation in their cavity. This special feature shown by poly (dibenzo-18-crown-6) has been used in our laboratory for selective cation exchanger by column chromatography. No attempts were made for the separation of Gd(III) using hippuric acid media and column chromatography. The present communication describes a simple and sensitive method for the determination of Gd(III) using poly(dibenzo-18-crown-6) as stationary phase in hippuric acid medium. The proposed method affords an attractive feature as compared to the solvent extraction technique i.e. it is free from any organic diluents as an environmental concern