Dump truck-related deaths in construction, 1992-2007.

Science.gov (United States)

McCann, Michael; Cheng, Mei-Tai

2012-05-01

Dump trucks are universally used in construction and other industries to haul materials to the location and to remove waste materials. The source for dump truck-related fatality data was the Bureau of Labor Statistics Census of Fatal Occupational Injuries (CFOI) Research File. From 1992 to 2007, 829 construction workers were killed in dump truck-related incidents nationwide. Of those, 336 were dump truck operators with 215 deaths occurring in street and highway incidents. Another 343 deaths involved workers on foot, three-quarters struck by dump trucks. Sixty-four of the construction workers killed were maintaining dump trucks, 22 when caught between the truck frame and a falling dump truck bed. Of the 86 other deaths, 55 involved streets and highways. Recommendations include: (i) improving the reporting of seat belt usage in fatality reports; (ii) requiring use of seat belts; (iii) requiring the use of backup alarms, spotters, or other methods to alert dump truck operators to workers in their blind spots; (iv) prohibiting direct dumping at river banks and embankments; (v) using cameras or radar to enforce stopping at railway crossings; and (xi) enforcing worker safety practices (e.g., lockout/tagout procedures on elevated dump truck beds). Copyright © 2011 Wiley Periodicals, Inc.

78 FR 24293 - Pilot Program on NAFTA Trucking Provisions

Science.gov (United States)

2013-04-24

...-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... in the Agency's long-haul pilot program to test and demonstrate the ability of Mexico- domiciled... cross-border long-haul trucking pilot program to test and demonstrate the ability of Mexico-domiciled...

Large truck and bus crash facts, 2008. 

Science.gov (United States)

2010-03-01

This annual edition of Large Truck and Bus Crash Facts contains descriptive statistics about fatal, injury, and : property damage only crashes involving large trucks and buses in 2008. Selected crash statistics on passenger : vehicles are also presen...

77 FR 12356 - Pilot Program on NAFTA Trucking Provisions

Science.gov (United States)

2012-02-29

...-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... that applied to participate in the Agency's long-haul pilot program to test and demonstrate the ability... cross-border long-haul trucking pilot program to test and demonstrate the ability of Mexico-domiciled...

77 FR 40938 - Pilot Program on NAFTA Trucking Provisions

Science.gov (United States)

2012-07-11

...-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... Morales Guevara (DBA Fletes Morales) which applied to participate in the Agency's long-haul pilot program...] its intent to proceed with the initiation of a U.S.-Mexico cross-border long-haul trucking pilot...

76 FR 56272 - Pilot Project on NAFTA Trucking Provisions

Science.gov (United States)

2011-09-12

...-0097] Pilot Project on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... that have applied to participate in the Agency's long- haul pilot program to test and demonstrate the... cross-border long-haul trucking pilot program to test and demonstrate the ability of Mexico-domiciled...

76 FR 56868 - Pilot Project on NAFTA Trucking Provisions

Science.gov (United States)

2011-09-14

...-0097] Pilot Project on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... that have applied to participate in the Agency's long- haul pilot program to test and demonstrate the... proceed with the initiation of a U.S.-Mexico cross-border long-haul trucking pilot program to test and...

77 FR 27837 - Pilot Program on NAFTA Trucking Provisions

Science.gov (United States)

2012-05-11

...-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... carriers that applied to participate in the Agency's long- haul pilot program to test and demonstrate the... intent to proceed with the initiation of a U.S.-Mexico cross-border long-haul trucking pilot program to...

76 FR 73765 - Pilot Project on NAFTA Trucking Provisions

Science.gov (United States)

2011-11-29

...-0097] Pilot Project on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration... that have applied to participate in the Agency's long- haul pilot program to test and demonstrate the... proceed with the initiation of a U.S.-Mexico cross-border long-haul trucking pilot program to test and...

Boundary crossing in first marriage and remarriage

Science.gov (United States)

Choi, Kate H.; Tienda, Marta

2016-01-01

Owing to secular increases in divorce rates, remarriage has become a prevalent feature of American family life; yet, research about mate selection behavior in higher order marriages remains limited. Using log-linear methods to recent data from the 2008–2014 American Community Survey, we compare racial and ethnic sorting behavior in first and subsequent marriages. The two most frequently crossed boundaries – those involving White-Asian and White-Hispanic couples – are more permeable in remarriages than in first marriages. Boundaries that are crossed with less frequency – those between minority groups and the White-Black boundary-are less permeable in remarriages than in first marriages. Collectively, these findings suggest that racial and ethnic sorting processes in remarriage may reify existing social distances between pan-ethnic groups. Racial and ethnic variations in how the relative permeability of boundary changes between first and higher-order marriages underscore the importance of considering a broad array of interracial pairings when assessing the ways in which changes in family structure and marital sorting behavior promote integration. PMID:28126107

49 CFR 399.207 - Truck and truck-tractor access requirements.

Science.gov (United States)

2010-10-01

.... Exception. If air and electrical connections necessary to couple or uncouple a truck-tractor from a trailer... 49 Transportation 5 2010-10-01 2010-10-01 false Truck and truck-tractor access requirements. 399... Vehicles § 399.207 Truck and truck-tractor access requirements. (a) General rule. Any person entering or...

Accuracy of multi-point boundary crossing time analysis

Directory of Open Access Journals (Sweden)

J. Vogt

2011-12-01

Full Text Available Recent multi-spacecraft studies of solar wind discontinuity crossings using the timing (boundary plane triangulation method gave boundary parameter estimates that are significantly different from those of the well-established single-spacecraft minimum variance analysis (MVA technique. A large survey of directional discontinuities in Cluster data turned out to be particularly inconsistent in the sense that multi-point timing analyses did not identify any rotational discontinuities (RDs whereas the MVA results of the individual spacecraft suggested that RDs form the majority of events. To make multi-spacecraft studies of discontinuity crossings more conclusive, the present report addresses the accuracy of the timing approach to boundary parameter estimation. Our error analysis is based on the reciprocal vector formalism and takes into account uncertainties both in crossing times and in the spacecraft positions. A rigorous error estimation scheme is presented for the general case of correlated crossing time errors and arbitrary spacecraft configurations. Crossing time error covariances are determined through cross correlation analyses of the residuals. The principal influence of the spacecraft array geometry on the accuracy of the timing method is illustrated using error formulas for the simplified case of mutually uncorrelated and identical errors at different spacecraft. The full error analysis procedure is demonstrated for a solar wind discontinuity as observed by the Cluster FGM instrument.

Logistics of in-wood chipping and trucking of chips; Palstahaketuksen logistinen ketju

Energy Technology Data Exchange (ETDEWEB)

Nuuja, J [Joensuu Univ. (Finland). Faculty of Forestry; Asikainen, A [Metsaeosaamiskeskus, Joensuu (Finland). Joensuu Science Park

1997-12-31

In this study a in wood chipper and truck transport of chips were modelled and studied by discrete-event simulation. The input data, which included stand characteristics and information about transport distances was compiled by GRASS-program. This data based on the inventory done by Forestry Center TAPIO. With the model various transport alternatives were compared and the effect of work condition factors were studied. It was find out, that a long distance transport with interchangeable container truck gives better productivity than a truck with a trailer. This results from shorter loading time for the interchangeable container truck

Logistics of in-wood chipping and trucking of chips; Palstahaketuksen logistinen ketju

Energy Technology Data Exchange (ETDEWEB)

Nuuja, J. [Joensuu Univ. (Finland). Faculty of Forestry; Asikainen, A. [Metsaeosaamiskeskus, Joensuu (Finland). Joensuu Science Park

1996-12-31

In this study a in wood chipper and truck transport of chips were modelled and studied by discrete-event simulation. The input data, which included stand characteristics and information about transport distances was compiled by GRASS-program. This data based on the inventory done by Forestry Center TAPIO. With the model various transport alternatives were compared and the effect of work condition factors were studied. It was find out, that a long distance transport with interchangeable container truck gives better productivity than a truck with a trailer. This results from shorter loading time for the interchangeable container truck

Shifting Institutional Boundaries through Cross-Border Higher Education

Science.gov (United States)

Amaral, Alberto; Tavares, Orlanda; Cardoso, Sónia; Sin, Cristina

2016-01-01

Cross-border higher education (CBHE) has been changing the organizational boundaries of higher education institutions (HEIs). This study aims to analyze the shifting boundaries of Portuguese HEIs through the lens of the identity concept in organization theories, considering three contexts with different levels of regulation: African…

The association between adolescent entry into the trucking industry and risk of HIV among long-distance truck drivers in India.

Science.gov (United States)

Mishra, Ram Manohar; Dube, Madhulika; Saggurti, Niranjan; Pandey, Arvind; Mahapatra, Bidhubhusan; Ramesh, Sowmya

2012-01-01

This study examines the relationship between entry into the trucking industry during adolescence and both sexually transmitted infections (STIs) and infection by the human immunodeficiency virus (HIV) among long-distance truck drivers in India. Data were sourced from a cross-sectional survey (sample size: 2066) undertaken in 2007 among long-distance truck drivers. The survey spread across major transshipment locations covering the bulk of India's transport volume along four routes. Participants were interviewed about sexual behaviors and were tested for HIV and STIs. The present authors constructed two synthetic cohorts based on the participants' duration of employment in the trucking industry: (1) low (duration ≤ 6 years) and (2) high experience (duration ≥ 7 years). Based on age at entry into the trucking industry, participants were termed as either adolescent (age at entry 4.0%, respectively; adjusted OR: 1.9; 95% CI: 1.2-3.1) and syphilis (5.7% versus 3.5%, respectively; adjusted OR: 1.8; 95% CI: 1.1-3.1). These results suggest the need for focused behavioral change programs in HIV prevention interventions for adolescent truckers in India and elsewhere.

Lift truck safety review

Energy Technology Data Exchange (ETDEWEB)

Cadwallader, L.C.

1997-03-01

This report presents safety information about powered industrial trucks. The basic lift truck, the counterbalanced sit down rider truck, is the primary focus of the report. Lift truck engineering is briefly described, then a hazard analysis is performed on the lift truck. Case histories and accident statistics are also given. Rules and regulations about lift trucks, such as the US Occupational Safety an Health Administration laws and the Underwriter`s Laboratories standards, are discussed. Safety issues with lift trucks are reviewed, and lift truck safety and reliability are discussed. Some quantitative reliability values are given.

Lift truck safety review

International Nuclear Information System (INIS)

Cadwallader, L.C.

1997-03-01

This report presents safety information about powered industrial trucks. The basic lift truck, the counterbalanced sit down rider truck, is the primary focus of the report. Lift truck engineering is briefly described, then a hazard analysis is performed on the lift truck. Case histories and accident statistics are also given. Rules and regulations about lift trucks, such as the US Occupational Safety an Health Administration laws and the Underwriter's Laboratories standards, are discussed. Safety issues with lift trucks are reviewed, and lift truck safety and reliability are discussed. Some quantitative reliability values are given

Evidence of Cross-boundary Use and Reuse of Digital Educational Resources

Directory of Open Access Journals (Sweden)

Riina Vuorikari

2009-12-01

Full Text Available In this study an investigation using log-files of teachers’ Collections of educational resources in two different platforms was conducted. The goal was to find empirical evidence from the field that teachers use and reuse learning resources that are in a language other than their mother tongue and originate from different countries than they do, for this, the term cross-boundary use of learning resources is used. In both contexts behavioural evidence was found that cross-boundary use and reuse takes place, and it was shown that it correlates with the general use and reuse trends. Moreover, it was found that cross-boundary reuse, when compared to 20% of general reuse, was notably less (37% to 55% of it. The motivation to study cross-boundary use and reuse is to set a baseline for future studies, and to understand how it can be supported and enhanced in the future.

Boundary Crossing in R&D Projects in Schools: Learning through Cross-Professional Collaboration

Science.gov (United States)

Schenke, Wouter; van Driel, Jan; Geijsel, Femke P.; Volman, Monique L. L.

2017-01-01

Background/Context: School leaders, teachers, and researchers are increasingly involved in collaborative research and development (R&D) projects in schools, which encourage crossing boundaries between the fields of school and research. It is not clear, however, what and how professionals in these projects learn through cross-professional…

Cross-boundary substance uses among Hong Kong Chinese young adults.

Science.gov (United States)

Lau, Joseph T F; Tsui, Hi Yi; Lam, Lawrence T; Lau, Mason

2007-09-01

The study documents the characteristics of Hong Kong residents who used substances in mainland China. Characteristics of such users were compared with those using substances elsewhere. A cross-sectional survey was used. Data analyses were stratified by gender, and multivariate analyses were performed. Respondents, Hong Kong adults aged 18-30 (n = 6,528), were interviewed using a mixed interviewer and computerized mobile phone method, at the Hong Kong-mainland China boundary. Cross-border substance users and other types of substance users had characteristics that were quite different (e.g., education level, perceived harmfulness of substance use in general, having friends who frequently used substances in mainland China). Cross-boundary substance users also found it easier to obtain substances in mainland China than in Hong Kong (males: 60.5%, females: 39.6%) and perceived no chance of being arrested in mainland China because of substance use (men: 28.8%, women: 24.5%). They tended to use substances in discos/rave parties together with friends (men: 77%, women: 81%), and substances were often obtained for free (men: 63.2%, women: 78%). Ecstasy and ketamine were often used (men: 86.5% & 79.4%, women: 81% & 70.2%), and multiple uses of different substances were common (men: 81.3%, women: 68.6%). Lower price, peer influence, and better availability were reasons behind cross-boundary substance use behaviors. Cross-boundary substance users have specific characteristics. Prevention policies should take these characteristics into account. Regional collaborations are highly warranted.

76 FR 63988 - Pilot Project on NAFTA Trucking Provisions; Pre-Authorization Safety Audits

Science.gov (United States)

2011-10-14

...-0097] Pilot Project on NAFTA Trucking Provisions; Pre-Authorization Safety Audits AGENCY: Federal Motor... motor carriers that applied to participate in the Agency's long-haul pilot program to test and... intent to proceed with the initiation of a United States- Mexico cross-border long-haul trucking pilot...

Process-based investigation of cross-boundary environmental pressure from urban household consumption

International Nuclear Information System (INIS)

Yang, Dewei; Lin, Yanjie; Gao, Lijie; Sun, Yanwei; Wang, Run; Zhang, Guoqin

2013-01-01

Sustainability research at the city scale is increasingly focusing on urban household consumption in the context of global climate change. We use a complementary emergy accounting (EMA) and carbon footprint accounting (CFA) method to investigate the environmental pressure generated by household consumption in Xiamen, China. We distinguish between the resource extraction, consumption and disposal stages within an urban spatial conceptual framework, comprising the Urban Footprint Region (UFR) and Urban Sprawl Region (USR), and analyze five environmental footprint categories associated with cross-boundary household emergy and carbon flows. Cross-boundary activities, which link the USR with its UFR, contributed nearly 90% of total emergy and 70% of total GHG emissions in CFA. Transport fuel, building materials and food contribute most to environmental pressure in both EMA and CFA. The results indicate a significant cross-boundary resource burden and environmental footprint associated with household activities. The employed framework, method, and scope challenge the conventional spatial boundary of the urban system, and the results have important policy implications for urban sustainability and cross-boundary environmental management. - Highlights: ► We propose an urban spatial conceptual framework that includes USR and UFRs. ► A complementary EMA and CFA method is employed in urban household consumption system. ► Process-based cross-boundary environmental pressure of household consumption are evaluated. ► USR exerts pressure on its UFRs by extensive resource extraction and environmental emissions. ► We elucidate the USR–UFR environmental relationships and household energy policy

Freight Shuttle System: Cross-Border Movement of Goods

Energy Technology Data Exchange (ETDEWEB)

Levien, Mary

2011-05-31

The Freight Shuttle System (FSS) is designed to provide freight transportation services between those short and intermediate distance locations (within 600 miles) that are currently handling large volumes of freight traffic. Much like trucks, the FSS's transporters are autonomous: each transporter has its own propulsion and travels independently of other transporters. Inspired by railroads, each FSS transporter has steel wheels operating on a steel running surface and can carry either a standardsize freight container or an over-the-road truck trailer. However, unlike either rail or trucks, the FSS runs on an elevated, dedicated guideway to avoid the interference of other transportation systems. The objective of this report is to examine the potential viability for an alternative transportation system for trailers and containers in a multi-national, cross-border setting. The El Paso-Ciudad Juarez region serves as the environment of this analysis.

Truck Drivers' Use of the Internet: A Mobile Health Lifeline.

Science.gov (United States)

Heaton, Karen; Combs, Bryan; Griffin, Russell

2017-06-01

Because of their social isolation, irregular and unpredictable schedules, limited access to health care, and long periods of travel, long-haul truckers may benefit from the use of mobile health applications on Internet-capable devices. The purpose of this study was to determine Internet access and usage among a sample of long-haul truck drivers. In this cross-sectional study, truck drivers completed a pencil and paper survey with questions on demographics, work and health histories, and Internet access and usage for both personal and job reasons. A total of 106 truck drivers were recruited from trucking industry trade shows, by word of mouth, and directly from trucking companies. Overall, the truck drivers' use of the Internet was limited. Their usage for personal and job-related reasons differed. Social connectivity and access to health and wellness information were important during personal usage time. Job-related Internet use was highly practical, and applied to seeking information for directions and maps, fuel stops and pricing, and communicating with employers or transmitting documents. Age and experience were associated with Internet use. Younger, less-experienced drivers used the Internet more than older, experienced drivers. Targeted mobile health messaging may be a useful tool to inform truck drivers of health conditions and plans, and may provide links to primary care providers needing to monitor or notify drivers of diagnostic results or treatment plans.

Development of Auto-Stacking Warehouse Truck

Directory of Open Access Journals (Sweden)

Kuo-Hsien Hsia

2018-03-01

Full Text Available Warehouse automation is a very important issue for the promotion of traditional industries. For the production of larger and stackable products, it is usually necessary to operate a fork-lifter for the stacking and storage of the products by a skilled person. The general autonomous warehouse-truck does not have the ability of stacking objects. In this paper, we develop a prototype of auto-stacking warehouse-truck that can work without direct operation by a skill person. With command made by an RFID card, the stacker truck can take the packaged product to the warehouse on the prior-planned route and store it in a stacking way in the designated storage area, or deliver the product to the shipping area or into the container from the storage area. It can significantly reduce the manpower requirements of the skilled-person of forklift technician and improve the safety of the warehousing area.

Design and analysis of truck body for increasing the payload capacity

Science.gov (United States)

Vamshi Krishna, K.; Yugandhar Reddy, K.; Venugopal, K.; Ravi, K.

2017-11-01

Truck industry is a major source of transportation in India. With an average truck travelling about 300 kilometers per day [1], every kilogram of truck weight is of concern to the industry in order to get the best out of the truck. The main objective of this project is to increase the payload capacity of automotive truck body. Every kilogram of increased vehicle weight will decrease the vehicle payload capacity in turn increasing the manufacturing cost and reducing the fuel economy by increase the fuel consumption. With the intension of weight reduction, standard truck body has been designed and analyzed in ANSYS software. C-cross section beams were used instead of conventional rectangular box sections to reduce the weight of the body. Light-weight Aluminum alloy Al 6061 T6 is used to increase the payload capacity. The strength of the Truck platform is monitored in terms of deformation and stress concentration. These parameters will be obtained in structural analysis test condition environment. For reducing the stress concentration the concept of beams of uniform strength is used. Accordingly necessary modifications are done so that the optimized model has a better stress distribution and much lesser weight compared to the conventional model. The results obtained by analyzing the modified model are compared with the standard model.

Sample path analysis and distributions of boundary crossing times

CERN Document Server

Zacks, Shelemyahu

2017-01-01

This monograph is focused on the derivations of exact distributions of first boundary crossing times of Poisson processes, compound Poisson processes, and more general renewal processes.  The content is limited to the distributions of first boundary crossing times and their applications to various stochastic models. This book provides the theory and techniques for exact computations of distributions and moments of level crossing times. In addition, these techniques could replace simulations in many cases, thus providing more insight about the phenomenona studied. This book takes a general approach for studying telegraph processes and is based on nearly thirty published papers by the author and collaborators over the past twenty five years.  No prior knowledge of advanced probability is required, making the book widely available to students and researchers in applied probability, operations research, applied physics, and applied mathematics. .

Sexual behavior among truck drivers.

Science.gov (United States)

Singh, Rajiv Kumar; Joshi, Hari Shankar

2012-01-01

A cross-sectional study was conducted on Lucknow highway in Bareilly district of Uttar Pradesh to study the knowledge of truck drivers about HIV transmission and prevention and to study the sexual behaviour of these drivers with reference to HIV/AIDS. Age, marital status, education, income, drinking alcohol, length of stay away from home, knowledge about transmission and prevention of HIV, and HIV-prone behavior of truck drivers were studied. Chi-square, mean, and SD were calculated. In all, 289 (97.6%) drivers had heard about HIV/AIDS. Only 242 (81.8%) were aware of HIV transmission by heterosexual route. Misconceptions such as HIV transmission by mosquito bites, living in same room, shaking hands, and sharing food were found. Out of 174 (58.8%) who visited Commercial Sex Workers (CSW), 146 (83.9%) used a condom. 38 (12.8%) visited more than 5 CSW in the last 3 months. Time away from home on the road, marital status, alcohol use, and income class were associated with visiting CSW. High-risk behavior was established in the study population. Safe sex and use of condoms need to be promoted among the truck drivers and better condom availability needs to be assured on highways.

Aging of the containment pressure boundary in light-water reactor plants

International Nuclear Information System (INIS)

Naus, D.J.; Oland, C.B.; Ellingwood, B.R.

1997-01-01

Research is being conducted by the Oak Ridge National Laboratory to address aging of the containment pressure boundary in light-water reactor plants. The objectives of this work are to (1) identify the significant factors related to occurrence of corrosion, efficacy of inspection, and structural capacity reduction of steel containments and liners of concrete containments, and to make recommendations on use of risk models in regulatory decisions; (2) provide NRC reviewers a means of establishing current structural capacity margins for steel containments, and concrete containments as limited by liner integrity; and (3) provide recommendations, as appropriate, on information to be requested of licensees for guidance that could be utilized by NRC reviewers in assessing the seriousness of reported incidences of containment degradation. In meeting these objectives research is being conducted in two primary task areas - pressure boundary condition assessment and root-cause resolution practices, and reliability-based condition assessments. Under the first task area a degradation assessment methodology was developed for use in characterizing the in-service condition of metal and concrete containment pressure boundary components and quantifying the amount of damage that is present. An assessment of available destructive and nondestructive techniques for examining steel containments and liners is ongoing. Under the second task area quantitative structural reliability analysis methods are being developed for application to degraded metallic pressure boundaries to provide assurances that they will be able to withstand future extreme loads during the desired service period with a level of reliability that is sufficient for public safety. To date, mathematical models that describe time-dependent changes in steel due to aggressive environmental factors have been identified, and statistical data supporting their use in time-dependent reliability analysis have been summarized

Contributions of Diesel Truck Emissions to Indoor Elemental Carbon Concentrations in Home Proximate to Ambassador Bridge

Science.gov (United States)

Ambassador Bridge, connecting Detroit, Michigan and Windsor, Ontario, is the busiest international commercial vehicle crossing in North America, with a large percentage of heavy duty diesel trucks. This study seeks to examine the contribution of diesel truck traffic across Ambass...

An extended car-following model considering the appearing probability of truck and driver's characteristics

Science.gov (United States)

Rong, Ying; Wen, Huiying

2018-05-01

In this paper, the appearing probability of truck is introduced and an extended car-following model is presented to analyze the traffic flow based on the consideration of driver's characteristics, under honk environment. The stability condition of this proposed model is obtained through linear stability analysis. In order to study the evolution properties of traffic wave near the critical point, the mKdV equation is derived by the reductive perturbation method. The results show that the traffic flow will become more disorder for the larger appearing probability of truck. Besides, the appearance of leading truck affects not only the stability of traffic flow, but also the effect of other aspects on traffic flow, such as: driver's reaction and honk effect. The effects of them on traffic flow are closely correlated with the appearing probability of truck. Finally, the numerical simulations under the periodic boundary condition are carried out to verify the proposed model. And they are consistent with the theoretical findings.

An innovative container supply chain for forest chips

Energy Technology Data Exchange (ETDEWEB)

Karttunen, Kalle; Korpinen, Olli-Jussi; Laettilae, Lauri; Foehr, Jarno; Ranta, Tapio [Lappeenranta Univ. of Technology, Mikkeli (Finland)], e-mail: kalle.karttunen@lut.fi

2012-11-01

Most forest chips are transported by trucks with a solid frame. Forest-chip volumes will at least double before 2020, which means longer transport distances from the supply areas to the largest demand sites in Finland. The study concentrates on an innovative container solution based on a channel composite structure, creating a lighter, temperature-isolated, and more durable structure. In addition to the structural benefits, the container includes an innovative supply chain with a beneficial handling operation, interchangeability and maximising of the payload capacity, resulting in an energy- and cost-efficient solution. This innovative-container-based supply chain for forest chips has been studied via cost analysis, GIS analysis, and discrete-event simulation methods. The purpose of the study was to compare a truck of interchangeable containers with solid-frame trucks. The option of interchangeable containers allows combining truck logistics with other modes of transport, such as trains and waterways. The study showed the cost-efficiency potential of container truck logistics, stemming from the cost and payload savings and the supply-chain productivity advantages over solid-frame trucks. The innovative solution for interchangeable-container logistics is an option for large-scale supply of forest chips.

Image processing system for the measurement of timber truck loads

Science.gov (United States)

Carvalho, Fernando D.; Correia, Bento A. B.; Davies, Roger; Rodrigues, Fernando C.; Freitas, Jose C. A.

1993-01-01

The paper industry uses wood as its raw material. To know the quantity of wood in the pile of sawn tree trunks, every truck load entering the plant is measured to determine its volume. The objective of this procedure is to know the solid volume of wood stocked in the plant. Weighing the tree trunks has its own problems, due to their high capacity for absorbing water. Image processing techniques were used to evaluate the volume of a truck load of logs of wood. The system is based on a PC equipped with an image processing board using data flow processors. Three cameras allow image acquisition of the sides and rear of the truck. The lateral images contain information about the sectional area of the logs, and the rear image contains information about the length of the logs. The machine vision system and the implemented algorithms are described. The results being obtained with the industrial prototype that is now installed in a paper mill are also presented.

Crossing boundaries in a collaborative modeling workspace

Science.gov (United States)

Morisette, Jeffrey T.; Cravens, Amanda; Miller, Brian W.; Talbert, Marian; Talbert, Colin; Jarnevich, Catherine S.; Fink, Michelle; Decker, Karin; Odell, Eric

2017-01-01

There is substantial literature on the importance of bridging across disciplinary and science–management boundaries. One of the ways commonly suggested to cross boundaries is for participants from both sides of the boundary to jointly produce information (i.e., knowledge co-production). But simply providing tools or bringing people together in the same room is not sufficient. Here we present a case study documenting the mechanisms by which managers and scientists collaborated to incorporate climate change projections into Colorado’s State Wildlife Action Plan. A critical component of the project was the use of a collaborative modeling and visualization workspace: the U.S. Geological Survey’s Resource for Advanced Modeling (RAM). Using video analysis and pre/post surveys from this case study, we examine how the RAM facilitated cognitive and social processes that co-produced a more salient and credible end product. This case provides practical suggestions to scientists and practitioners who want to implement actionable science.

Traversing School-Community Partnerships Utilizing Cross-Boundary Leadership

Science.gov (United States)

Krumm, Bernita L.; Curry, Katherine

2017-01-01

Utilizing the conceptual framework of cross-boundary leadership, researchers conducted this qualitative case study to gain a better understanding of district-level leaders' actions and attitudes that led to meaningful, sustainable partnerships between the school, families, and community. Administrators in two urban, two suburban, and two rural…

Measuring Timber Truck Loads With Image Processing In Paper Mills

Science.gov (United States)

Silva, M. Santos; Carvalho, Fernando D.; Rodrigues, F. Carvalho; Goncalves, Ana N. R.

1989-04-01

The raw material for the paper industry is wood. To have an exact account of the stock of piled sawn tree trunks every truck load entering the plant's stockyard must be measured as to the amount of wood being brought in. Weighting down the trucks has its own problems, mainly, due to the high capacity of the tree trunks to absorb water. This problem is further enhanced when calculations must be made to arrive at the mass of sawn tree trunks which must go into the process of producing a certain quantity of paper pulp. The method presented here is based on two fixed cameras which take the image of the truck load. One takes a view of the trunks in order to get information on the average length of the tree trunks. The other obtains a side view which is digitised and by just discriminating against a grey level the area covered by the tree trunk cross section is measured. A simple arithmetic operation gives the volume of wood in the trunk. The same computer, a PC, will register the trucks particulars is almost independent of weather the wood is wet or dry and it serves trucks of any size.

Occupational Hydrofluoric Acid Injury from Car and Truck Washing--Washington State, 2001-2013.

Science.gov (United States)

Reeb-Whitaker, Carolyn K; Eckert, Carly M; Anderson, Naomi J; Bonauto, David K

2015-08-21

Exposure to hydrofluoric acid (HF) causes corrosive chemical burns and potentially fatal systemic toxicity. Car and truck wash cleaning products, rust removers, and aluminum brighteners often contain HF because it is efficient in breaking down roadway matter. The death of a truck wash worker from ingestion of an HF-based wash product and 48 occupational HF burn cases associated with car and truck washing in Washington State during 2001-2013 are summarized in this report. Among seven hospitalized workers, two required surgery, and all but one worker returned to the job. Among 48 injured workers, job titles were primarily auto detailer, car wash worker, truck wash worker, and truck driver. Because HF exposure can result in potentially severe health outcomes, efforts to identify less hazardous alternatives to HF-based industrial wash products are warranted.

Kogi Truck Culture

OpenAIRE

Choy, Vivian

2011-01-01

Food trucks have become a large phenomenon in many parts of Southern California. In fact, the University of California, Los Angeles had begun permitting several food trucks to park on campus for hungry students, in response to the closure of the Bombshelter, a major campus food court. These trucks’ budding popularity has been spurred by the notable Kogi Trucks, which began its business serving those in Los Angeles. To explore the heart of this Kogi hype, I took two trips to the intersectio...

Multilevel Boundary Crossing in a Professional Development School Partnership

NARCIS (Netherlands)

Akkerman, Sanne|info:eu-repo/dai/nl/217379788; Bruining, Ton

2016-01-01

This study aims to understand the recurrent challenges of professional development school (PDS) partnerships experienced by many countries. It does so by conceptualizing PDS partnerships as endeavors to cross institutionally and epistemologically developed boundaries between teacher education,

Boundaries, injective envelopes, and reduced crossed products

DEFF Research Database (Denmark)

Bryder, Rasmus Sylvester

In this dissertation, we study boundary actions, equivariant injective envelopes, as well as theideal structure of reduced crossed products. These topics have recently been linked to thestudy of C-simple groups, that is, groups with simple reduced group C-algebras.In joint work with Matthew Kennedy......, we consider reduced twisted crossed products overC-simple groups. For any twisted C-dynamical system over a C-simple group, we provethat there is a one-to-one correspondence between maximal invariant ideals in the underlyingC-algebra and maximal ideals in the reduced crossed product. When......*-algebras, and relate the intersection property for group actions on unital C*-algebras to the intersection property for theequivariant injective envelope. Moreover, we also prove that the equivariant injective envelopeof the centre of the injective envelope of a unital C*-algebra can be regarded as a C...

Truck transportation of radioactive materials

International Nuclear Information System (INIS)

Madsen, M.M.; Wilmot, E.L.

1983-01-01

Analytical models in RADTRAN II are used to calculate risks to population subgroups such as people along transport routes, people at stops, and crewman. The stops model, which calculates the dose to persons adjacent to the transport vehicle while it is stopped, frequently provides the largest contribution to incident-free radiological impacts. Components such as distances from the vehicle containing radioactive material to nearby people at stops, stop duration, and number of crew members are required for the stops model as well as other incident-free models. To provide supporting data for RADTRAN II based on operational experience, selected truck shipments of radioactive material were observed from origin to destination. Other important aspects of this program were to correlate package size to effective shipment transport index (TI) using radiological surveys and to characterize population distributions and proximities of people to the shipment at a generic truck stop

Computer-Mediated Communication in Intimate Relationships: Associations of Boundary Crossing, Intrusion, Relationship Satisfaction, and Partner Responsiveness.

Science.gov (United States)

Norton, Aaron M; Baptist, Joyce; Hogan, Bernie

2018-01-01

This study examined the impact of technology on couples in committed relationships through the lens of the couple and technology framework. Specifically, we used data from 6,756 European couples to examine associations between online boundary crossing, online intrusion, relationship satisfaction, and partner responsiveness. The results suggest that participants' reports of online boundary crossing were linked with lower relationship satisfaction and partner responsiveness. Also, lower relationship satisfaction and partner responsiveness were associated with increased online boundary crossing. The results suggest that men, but not women, who reported greater acceptability for online boundary crossing were more likely to have partners who reported lower relationship satisfaction in their relationships. Implications for clinicians, relationship educators, and researchers are discussed. © 2017 American Association for Marriage and Family Therapy.

Benefit of energy absorption by the truck in a frontal car-to-truck collision

NARCIS (Netherlands)

Coo, P.J.A. de; Adalian, C.

2000-01-01

EEVC Working Group 14 is investigating the effect of fixing energy absorbing front underrun protection systems (eaFUPS) to trucks instead of rigid devices in order to reduce the injury severity to car occupants in car-to-truck frontal collisions. Three car-to-truck crash tests with cars from

Experimental research on crossing shock wave boundary layer interactions

Science.gov (United States)

Settles, G. S.; Garrison, T. J.

1994-10-01

An experimental research effort of the Penn State Gas Dynamics Laboratory on the subject of crossing shock wave boundary layer interactions is reported. This three year study was supported by AFOSR Grant 89-0315. A variety of experimental techniques were employed to study the above phenomena including planar laser scattering flowfield visualization, kerosene lampblack surface flow visualization, laser-interferometer skin friction surveys, wall static pressure measurements, and flowfield five-hole probe surveys. For a model configuration producing two intersecting shock waves, measurements were made for a range of oblique shock strengths at freestream Mach numbers of 3.0 and 3.85. Additionally, measurements were made at Mach 3.85 for a configuration producing three intersecting waves. The combined experimental dataset was used to formulate the first detailed flowfield models of the crossing-shock and triple-shock wave/boundary layer interactions. The structure of these interactions was found to be similar over a broad range of interaction strengths and is dominated by a large, separated, viscous flow region.

The open-pit truck dispatching method based on the completion of production target and the truck flow saturation

Energy Technology Data Exchange (ETDEWEB)

Xing, J.; Sun, X. [Northeastern University, Shenyang (China)

2007-05-15

To address current problems in the 'modular dispatch' dynamic programming system widely used in open-pit truck real-time dispatching, two concepts for meeting production targets and truck flow saturation were proposed. Using truck flow programming and taking into account stochastic factors and transportation distance, truck real-time dispatching was optimised. The method is applicable to both shovel-truck match and mismatching and also to empty and heavy truck dispatching. In an open-pit mine the production efficiency could be increased by between 8% and 18%. 6 refs.

Could Expanded Freight Rail Reduce Air Pollution from Trucks?

Science.gov (United States)

Bickford, E. E.; Holloway, T.; Johnston, M.

2010-12-01

Cars, trucks and trains are a significant source of emissions that impact both climate and air quality on regional to global scales. Diesel vehicles, most used for freight transport, account for 42% of on-road nitrogen oxide emissions, 58% of on-road fine particulate emissions, and 21% of on-road carbon dioxide emissions. With freight tonnage projected to increase 28% by 2018, and freight trucks the fastest growing source of transportation emissions, we evaluate the potential for increased rail capacity to reduce the environmental impacts of trucks. Most widely available mobile source emissions inventories contain insufficient spatial detail to quantify realistic emission scenario options, and none to date have been linked with commodity flow information in a manner appropriate to consider the true potential of rail substitution. To support a truck-to-rail analysis, and other policy assessments requiring roadway-by-roadway analysis, we have developed a freight emissions inventory for the Upper Midwest based on the Federal Highway Administration’s Freight Analysis Framework version 2.2 and the Environmental Protection Agency’s on-road emissions model, Mobile6.2. Using a Geographical Information System (GIS), we developed emissions scenarios for truck-to-rail modal shifts where 95% of freight tonnage on trips longer than 400 miles is shifted off of trucks and onto railways. Scenarios will be analyzed with the Community Multiscale Air Quality (CMAQ) regional model to assess air quality impacts of associated changes. By using well-respected transportation data and realistic assumptions, results from this study have the potential to inform decisions on transportation sustainability, carbon management, public health, and air quality.

Air-cushion vehicles as an alternative to conventional industrial trucks

International Nuclear Information System (INIS)

Marr, E.

2003-01-01

Protective shieldings must be used for the transportation of radioactive materials, such as drums and containers within the control area, in order to observe the activity classes of the rooms. As a result of the change in the radiation protection ordinance, the operating areas of the floor conveyors have to be protected even more, i.e. transportation weights are becoming even bigger. When using pallet lift trucks without drive, weights over 2 tons are virtually unable to be operated. A fork-lift truck must be used for higher loads. If the transportation weight (transportation load and net weight of the lift truck) is doubled, usage within buildings is very restricted through the ceiling net load. This is the range of application of air cushion vehicles, in particular if positioning accuracy and remote-controlled driving become necessary. (orig.)

Dynamic simulation of collisions of heavy high-speed trucks with concrete barriers

International Nuclear Information System (INIS)

Itoh, Yoshito; Liu, Chunlu; Kusama, Ryuichi

2007-01-01

Real vehicle collision experiments on full-scale road safety barriers are important to determine the outcome of a vehicle versus barrier impact accident. However, such experiments require large investment of time and money. Numerical simulation has therefore been imperative as an alternative method for testing concrete barriers. In this research, spring subgrade models were first developed to simulate the ground boundary of concrete barriers. Both heavy trucks and concrete barriers were modeled using finite element methods (FEM) to simulate dynamic collision performances. Comparison of the results generated from computer simulations and on-site full-scale experiments demonstrated that the developed models could be applied to simulate the collision of heavy trucks with concrete barriers to provide the data to design new road safety barriers and analyze existing ones

Vehicle to vehicle communications for trucks.

Science.gov (United States)

2014-01-01

The trucking industry is a critical component of American commerce. The American : Trucking Association estimates that over 80 percent of U.S. communities depend : exclusively on trucking for delivery of their goods and commodities

Development of offroad unmanned dump truck navigation system. Dump truck mujin soko system no kaihatsu ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Horii, Z [Nittetsu Mining Co. Ltd., Tokyo (Japan)

1992-08-25

A large offroad unmanned dump truck navigation system has been developed, and is in practical operation mounted on dump trucks at Torigatayama Limestone Quarry of Nittetsu Mining Company. The system functions in a manual dump truck navigation mode, wireless navigation mode, and unmanned control mode. The unmanned control mode further includes a mode to navigate the truck on a predetermined course with its data having been input in a computer and a mode that when the truck was moved on a course under a wireless control, the computer learns the course and drives the truck autonomously thereafter. The safety measures are divided into the hardware safety function to detect abnormalities in brakes and other vehicle parts, and the software safety functions of data communications, sensor action check, and prevention of collision of trucks with each other. The system has resulted in a productivity of average one-way travel distance of 345 m, and average unmanned navigation cycle time of 9 minutes and 26 seconds for a transportation efficiency of 541 t/hour/truck, having reached at least the manned operation level. 4 figs., 1 tab.

Integrating medical and environmental sociology with environmental health: crossing boundaries and building connections through advocacy.

Science.gov (United States)

Brown, Phil

2013-06-01

This article reviews the personal and professional processes of developing an interdisciplinary approach to understanding the complex issues of environmental health in their community, political-economic, social science, and scientific contexts. This interdisciplinary approach includes a synthesis of research, policy work, and advocacy. To examine multiple forms of interdisciplinarity, I examine pathways of integrating medical and environmental sociology via three challenges to the boundaries of traditional research: (1) crossing the boundaries of medical and environmental sociology, (2) linking social science and environmental health science, and (3) crossing the boundary of research and advocacy. These boundary crossings are discussed in light of conceptual and theoretical developments of popular epidemiology, contested illnesses, and health social movements. This interdisciplinary work offers a more comprehensive sociological lens for understanding complex problems and a practical ability to join with scientists, activists, and officials to meet public health needs for amelioration and prevention of environmental health threats.

Optimization of shovel-truck system for surface mining

Energy Technology Data Exchange (ETDEWEB)

Ercelebi, S.G.; Bascetin, A. [Istanbul Technical University, Istanbul (Turkey). Mining Engineering Department

2009-07-15

In surface mining operations, truck haulage is the largest item in the operating costs, constituting 50 to 60% of the total. In order to reduce this cost, it is necessary to allocate and dispatch the trucks efficiently. This paper describes shovel and truck operation models and optimization approaches for the allocation and dispatching of trucks under various operating conditions. Closed queuing network theory is employed for the allocation of trucks and linear programming for the purpose of truck dispatching to shovels. A case study was applied for the Orhaneli open Pit Coal Mine in Turkey. This approach would provide the capability of estimating system performance measures (mine throughput, mean number of trucks, mean waiting time, etc.) for planning purposes when the truck fleet is composed of identical trucks. A computational study is presented to show how choosing the optimum number of trucks and optimum dispatching policy affect the cost of moving material in a truck-shovel system.

Gelation of galactomannan containing water-bearing explosives

Energy Technology Data Exchange (ETDEWEB)

Lyerly, W.M.

1969-05-20

The rate of gelling in aqueous compositions consisting of a galactomannan cross-linked by chromium ions provided by a soluble chromate is accelerated by the addition of a soluble-reducing agent to a hydrosol (colloidal solution) comprising the hydrate galactomannan prior to addition of the cross-linking agent. The accelerated cross-linking system is particularly suitable for use in blasting compositions comprising water, inorganic oxidizing salt, and one or more fuels and/or sensitizers. Accelerating the rate of cross-linking finds special utility in the on-site formulation and mixing of these compositions, particularly in equipment such as water gel trucks or slurry trucks. (7 claims)

Gas fuelled heavy-duty trucks for municipal services

Energy Technology Data Exchange (ETDEWEB)

Forsberg, A. (City of Helsinki Construction Services (Finland)); Hietanen, L. (Lassila and Tikanoja, Jyvaeskylae (Finland)); Nylund, N.-O. (TEC TransEnergy Consulting, Espoo (Finland))

2009-07-01

Helsinki City Public Works Department (HKR) and the environmental management company Lassila and Tikanoja joined forces to demonstrate the suitability of heavy-duty gas fuelled trucks for municipal services. HKR acquired two and Lassila and Tikanoja five Mercedes-Benz Econic trucks. HKR's trucks are equipped with interchangeable platforms, Lassila an Tikanoja's trucks with refuse collection equipment. The trucks are subjected to a two-year follow-up study to establish reliability, operational costs and exhaust emissions. Diesel trucks representing up-to-date technology are used as reference. If the gas fuelled trucks perform well, this can lead to increased numbers of natural gas trucks in municipal services, and in the long run to the introduction of biogas fuelled trucks. (orig.)

Cross-boundary Substance Uses Among Hong Kong Chinese Young Adults

OpenAIRE

Lau, Joseph T.F.; Tsui, Hi Yi; Lam, Lawrence T.; Lau, Mason

2007-01-01

The study documents the characteristics of Hong Kong residents who used substances in mainland China. Characteristics of such users were compared with those using substances elsewhere. A cross-sectional survey was used. Data analyses were stratified by gender, and multivariate analyses were performed. Respondents, Hong Kong adults aged 18–30 (n = 6,528), were interviewed using a mixed interviewer and computerized mobile phone method, at the Hong Kong-mainland China boundary. Cross-border subs...

Containment wells to form hydraulic barriers along site boundaries

International Nuclear Information System (INIS)

Vo, D.; Ramamurthy, A.S.; Qu, J.; Zhao, X.P.

2008-01-01

In the field, aquifer remediation methods include pump and treat procedures based on hydraulic control systems. They are used to reduce the level of residual contamination present in the soil and soil pores of aquifers. Often, physical barriers are erected along the boundaries of the target (aquifer) site to reduce the leakage of the released soil contaminant to the surrounding regions. Physical barriers are expensive to build and dismantle. Alternatively, based on simple hydraulic principles, containment wells or image wells injecting clear water can be designed and built to provide hydraulic barriers along the contaminated site boundaries. For brevity, only one pattern of containment well system that is very effective is presented in detail. The study briefly reports about the method of erecting a hydraulic barrier around a contaminated region based on the simple hydraulic principle of images. During the clean-up period, hydraulic barriers can considerably reduce the leakage of the released contaminant from the target site to surrounding pristine regions. Containment wells facilitate the formation of hydraulic barriers. Hence, they control the movement of contaminants away from the site that is being remedied. However, these wells come into play, only when the pumping operation for cleaning up the site is active. After operation, they can be filled with soil to permit the natural ground water movement. They can also be used as monitoring wells

Pyrolytic graphite as an efficient second-order neutron filter at tuned positions of boundary crossing

International Nuclear Information System (INIS)

Adib, M.; Abdel Kawy, A.; Habib, N.; El Mesiry, M.

2010-01-01

An investigation of pyrolytic graphite (PG) crystal as an efficient second order neutron filter at tuned boundary crossings has been carried out. The neutron transmission through PG crystal at these tuned crossing points as a function of first- and second-order wavelengths were calculated in terms of PG mosaic spread and thickness. The filtering features of PG crystals at these tuned boundary crossings were deduced. It was shown that, there are a large number of tuned positions at double and triple boundary crossings of the curves (hkl) are very promising as tuned filter positions. However, only fourteen of them are found to be most promising ones. These tuned positions are found to be within the neutron wavelengths from 0.133 up to 0.4050 nm. A computer package GRAPHITE has been used in order to provide the required calculations in the whole neutron wavelength range in terms of PG mosaic spread and its orientation with respect to incident neutron beam direction. It was shown that 0.5 cm thick PG crystal with angular mosaic spread of 2 0 is sufficient to remove 2nd-order neutrons at the wavelengths corresponding to the positions of the intersection boundaries curves (hkl).

Ichnological record of the Frasnian-Famennian boundary interval: two examples from the Holy Cross Mts (Central Poland)

Science.gov (United States)

Stachacz, Michał; Uchman, Alfred; Rodríguez-Tovar, Francisco J.

2017-01-01

The Frasnian-Famennian (Late Devonian) boundary interval within the carbonate-siliciclastic series in the Kowala and Płucki sections (Holy Cross Mts, Central Poland) has been analysed to evaluate the influence of the Kellwasser event on the macrobenthic tracemaker community. The Upper Kellwasser event has a lithologically variable record, as horizons of flints (Kowala) and as a bed of bituminous, black, cephalopod limestone (Płucki). Both sections show mostly laminated, unbioturbated beds of marlstones or shales just above the Frasnian-Famennian boundary, which point to events of anoxia on the sea floor. However, the first anoxic horizon occurs below the Frasnian-Famennian boundary. The trace fossils and bioturbational structures are uncommon and poorly diversified. Trichichnus and Multina are the only frequent trace fossils in some beds. Moreover, one horizon above the Frasnian-Famennian boundary contains numerous Multina and a single ? Planolites. Such poorly diversified trace fossil assemblage suggests an unfavourable environment for most of burrowing organisms and fluctuations in oxygenation from anoxic, to dysoxic conditions. The occurrence of the trace fossils and bioturbational structures as spotted and mottled ichnofabrics from the 1.3 m above the Frasnian-Famennian boundary is interpreted as an improvement in bottom water oxygen conditions after the Upper Kellwasser event.

78 FR 33860 - Crawler, Locomotive, and Truck Cranes Standard; Extension of the Office of Management and Budget...

Science.gov (United States)

2013-06-05

...] Crawler, Locomotive, and Truck Cranes Standard; Extension of the Office of Management and Budget's (OMB... collection requirements contained in the General Industry Standard on Crawler, Locomotive, and Truck cranes... workers from using unsafe cranes and ropes, thereby reducing their risk of death or serious injury caused...

Truckstop - and Truck - Electrification

International Nuclear Information System (INIS)

Skip Yeakel

2001-01-01

The conclusions of this paper are: 0.5-1.5 G/H and/or BUSG/Y-how much time and money will it take to quantify and WHY BOTHER TO DO SO? No shortage of things to do re truckstop-+ truck - electrification; Better that government and industry should put many eggs in lots of baskets vs. all in one or few; Best concepts will surface as most viable; Economic appeal better than regulation or brute force; Launch Ground Freight Partnership and give it a chance to work; Demonstration is an effective means to educate, and learn from, customers-learning is a two way street; Research, Development, Demonstration, and Deployment (RD 3) are all important but only deployment gets results; TSE can start small in numbers of spaces to accommodate economically inspired growth but upfront plans should be made for expansion if meaningful idle reduction is to follow via TE; 110VAC 15A service/ parking space is minimal-if infrastructure starts like this, upfront plans must be made to increase capacity; Increased electrification of truckstop and truck alike will result in much better life on the road; Improved sleep will improve driver alertness and safety; Reduced idling will significantly reduce fuel use and emissions; Universal appeal for DOD, DOE, DOT, EPA, OEMs, and users alike; Clean coal, gas, hydro, nuclear, or wind energy sources are all distinctly American means by which to generate electricity; Nothing can compete with diesel fuel to serve mobile truck needs; stationary trucks are like power plants-they don't move and should NOT be powered by petroleum products whenever possible; Use American fueled power plants-electricity-to serve truck idling needs wherever practical to do so; encourage economic aspect; Create and reward industry initiatives to reduce fuel use; Eliminate FET on new trucks, provide tax credits (non highway fuel use and investment), provide incentives based on results; Encourage newer/ cleaner truck use; solicit BAAs with mandatory OEM/ fleet participation/ lead

9 CFR 316.14 - Marking tank cars and tank trucks used in transportation of edible products.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Marking tank cars and tank trucks used in transportation of edible products. 316.14 Section 316.14 Animals and Animal Products FOOD SAFETY... CONTAINERS § 316.14 Marking tank cars and tank trucks used in transportation of edible products. Each tank...

2015 E-Truck Task Force: Key Barriers Affecting E-Truck Adoption, Industry and Policy Implications, and Recommendations to Move the Market Forward

OpenAIRE

Brotherton, Tom; Gilde, Alycia; Tomic, Jasna

2016-01-01

CALSTART’s E-Truck Task Force (ETTF) produced a report outlining the markets for electric drive trucks (E-Trucks), the prime barriers facing their success and provided key findings and recommendations to support expanding E-Truck adoption. Four key findings have been identified by the E-Truck Task Force as barriers currently affecting the growth and viability of E-Truck sales

Grain boundary precipitation strengthening mechanism in W containing advanced creep resistant ferritic steels

Energy Technology Data Exchange (ETDEWEB)

Shibata, T.; Hasegawa, Y. [Tohoku Univ., Sendai (Japan)

2010-07-01

Grain boundary precipitation strengthening is expected to be a decisive factor in developing ferritic creep resistant steels. This study examined the grain boundary precipitation strengthening mechanism extracting the effect of the tempered martensitic microstructure and precipitates on the high angle grain boundary in M{sub 23}C4{sub 6} type carbide and the Fe{sub 2}W type Laves phase effect of the creep deformation fixing the grain boundary according to transmission electron microscope (TEM) observation. A creep test was carried out at high temperature in order to evaluate the high angle boundary strengthening effect simulating the long-term creep deformation microstructure by the lath structure disappearance. The correlation of the creep rupture time and the grain boundary shielding ratio were found to be independent of precipitate type. The creep deformation model represents block boundary shielding by precipitates as the decisive factor for W containing ferritic creep resistant steels. (orig.)

Business plan for Gourmet Food Truck in Helsinki

OpenAIRE

Mulmi, Mukesh

2015-01-01

This thesis work is about food truck and food truck industry in Finland. In Finland, Culinary scenes are booming and growing but, the food truck concept is new to Finland. Food truck industry is very young and currently, there is a hype for food truck and people are admiring new cuisines. Author himself is working as a cook. And he is passionate about food and restaurant industry. The main purpose of the thesis was to explore more about food truck industry in Finland and create the busine...

Effects of cross-anisotropy and stress-dependency of pavement layers on pavement responses under dynamic truck loading

Directory of Open Access Journals (Sweden)

Rafiqul A. Tarefder

2016-06-01

Full Text Available Previous studies by the authors have determined pavement responses under dynamic loading considering cross-anisotropy in one layer only, either the cross-anisotropic viscoelastic asphalt concrete (AC layer or the cross-anisotropic stress-dependent base layer, but not both. This study evaluates pavement stress–strain responses considering cross-anisotropy in all layers, i.e. AC, base and subbase, using finite element modeling (FEM technique. An instrumented pavement section on Interstate I-40 near Albuquerque, New Mexico was used in ABAQUS framework as model geometry. Field asphalt cores were collected and tested in the laboratory to determine the cross-anisotropy (n-values defined by horizontal to vertical modulus ratio, and other viscoelastic parameters as inputs of the model incorporated through user defined material interface (UMAT functionality in ABAQUS. Field base and subbase materials were also collected and tested in the laboratory to determine stress-dependent nonlinear elastic model parameters, as inputs of the model, again incorporated through UMAT. The model validation task was carried out using field-measured deflections and strain values under falling weight deflectometer (FWD loads at the instrumented section. The validated model was then subjected to an actual truck loading for studying cross-anisotropic effects. It was observed that horizontal tensile strain at the bottom of the AC layer and vertical strains in all layers decreased with an increase in n-value of the asphalt layer, from n < 1 (anisotropy to n=1 (isotropy. This indicates that the increase in horizontal modulus caused the decrease in layer strains. It was also observed that if the base and subbase layers were considered stress-dependent instead of linear elastic unbound layers, the horizontal tensile strain at the bottom of the asphalt layer increased and vertical strains on top of the base and subbase also increased.

Health promotion in the trucking setting: Understanding Dutch truck drivers' road to healthy lifestyle changes.

Science.gov (United States)

Boeijinga, Anniek; Hoeken, Hans; Sanders, José

2016-10-17

The working environment, the nature of the work, and the characteristics of truck drivers as a social group typically pose great challenges for the truck drivers' health and health promotion activities aiming to improve it. The purpose was to obtain a better understanding of (a) Dutch truck drivers' perceptions of health and lifestyle themes, and (b) the challenges they experience in their pursuit of a more healthy lifestyle, as a guiding framework for the development of health interventions targeting this occupational group. In this qualitative study, we conducted and analyzed 20 semi-structured interviews and seven cases of participant observations with Dutch truck drivers. Grounded theory was used to analyze the data. Our findings illustrate that Dutch truck drivers wish to improve their lifestyle but have unproductive associations with concepts of healthy living as well as a tendency to downplay their health risks. In addition, they experience barriers within their work and personal environment that prevent them from translating their intentions into actual lifestyle changes. Based on the insights derived from the interviews, we discuss recommendations for the development of more effective health promotion interventions for truck drivers.

Trends in truck freight energy use and carbon emissions in selected OECD countries from 1973 to 2005

International Nuclear Information System (INIS)

Kamakate, Fatumata; Schipper, Lee

2009-01-01

Trends in truck freight energy use and carbon emissions: In the age of global supply chains and 'just in time' logistics, fast and efficient goods movement is often seen as an economic imperative. Growth in global goods movement not only translates into growth in commercial trucking activity but also into growth in the share of trucking compared to other modes of in-country freight transportation. These trends have a significant impact on the energy intensity of freight transport. Using a bottom-up approach relying on national data, this study compares the energy intensity of truck freight in Australia, France, Japan, the United Kingdom and the United States from 1973 to the present. The analysis builds on previous work by and decomposing energy use for freight. Intensity is expressed in terms of vehicle intensity (megajoules/vehicle-kilometer), modal energy intensity (megajoules/tonne-kilometer), and carbon intensity (grams/tonne-km). The cross-country comparison highlights in part the influence of geography, transportation infrastructure, and truck utilization patterns on energy and carbon intensity from this sector. While improving fuel economy of individual vehicles is very important, large reductions in trucking energy use and emissions will also come from better logistics and driving, higher load factors, and better matching of truck capacity to load.

Naturalistic drive cycle synthesis for pickup trucks.

Science.gov (United States)

Liu, Zifan; Ivanco, Andrej; Filipi, Zoran

2015-09-01

Future pick-up trucks are meeting much stricter fuel economy and exhaust emission standards. Design tradeoffs will have to be carefully evaluated to satisfy consumer expectations within the regulatory and cost constraints. Boundary conditions will obviously be critical for decision making: thus, the understanding of how customers are driving in naturalistic settings is indispensable. Federal driving schedules, while critical for certification, do not capture the richness of naturalistic cycles, particularly the aggressive maneuvers that often shape consumer perception of performance. While there are databases with large number of drive cycles, applying all of them directly in the design process is impractical. Therefore, representative drive cycles that capture the essence of the naturalistic driving should be synthesized from naturalistic driving data. Naturalistic drive cycles are firstly categorized by investigating their micro-trip components, defined as driving activities between successive stops. Micro-trips are expected to characterize underlying local traffic conditions, and separate different driving patterns. Next, the transitions from one vehicle state to another vehicle state in each cycle category are captured with Transition Probability Matrix (TPM). Candidate drive cycles can subsequently be synthesized using Markov Chain based on TPMs for each category. Finally, representative synthetic drive cycles are selected through assessment of significant cycle metrics to identify the ones with smallest errors. This paper provides a framework for synthesis of representative drive cycles from naturalistic driving data, which can subsequently be used for efficient optimization of design or control of pick-up truck powertrains. Manufacturers will benefit from representative drive cycles in several aspects, including quick assessments of vehicle performance and energy consumption in simulations, component sizing and design, optimization of control strategies, and

A survey of repair practices for nuclear power plant containment metallic pressure boundaries

Energy Technology Data Exchange (ETDEWEB)

Oland, C.B.; Naus, D.J. [Oak Ridge National Lab., TN (United States)

1998-05-01

The Nuclear Regulatory Commission has initiated a program at the Oak Ridge National Laboratory to provide assistance in their assessment of the effects of potential degradation on the structural integrity and leaktightness of metal containment vessels and steel liners of concrete containments in nuclear power plants. One of the program objectives is to identify repair practices for restoring metallic containment pressure boundary components that have been damaged or degraded in service. This report presents issues associated with inservice condition assessments and continued service evaluations and identifies the rules and requirements for the repair and replacement of nonconforming containment pressure boundary components by welding or metal removal. Discussion topics include base and welding materials, welding procedure and performance qualifications, inspection techniques, testing methods, acceptance criteria, and documentation requirements necessary for making acceptable repairs and replacements so that the plant can be returned to a safe operating condition.

A survey of repair practices for nuclear power plant containment metallic pressure boundaries

International Nuclear Information System (INIS)

Oland, C.B.; Naus, D.J.

1998-05-01

The Nuclear Regulatory Commission has initiated a program at the Oak Ridge National Laboratory to provide assistance in their assessment of the effects of potential degradation on the structural integrity and leaktightness of metal containment vessels and steel liners of concrete containments in nuclear power plants. One of the program objectives is to identify repair practices for restoring metallic containment pressure boundary components that have been damaged or degraded in service. This report presents issues associated with inservice condition assessments and continued service evaluations and identifies the rules and requirements for the repair and replacement of nonconforming containment pressure boundary components by welding or metal removal. Discussion topics include base and welding materials, welding procedure and performance qualifications, inspection techniques, testing methods, acceptance criteria, and documentation requirements necessary for making acceptable repairs and replacements so that the plant can be returned to a safe operating condition

Risk of transporting plutonium dioxide and liquid plutonium nitrate by truck and rail

International Nuclear Information System (INIS)

Williams, L.D.; Hall, R.J.

1976-07-01

Results are summarized of the risk assessments of shipping PuO 2 powder and liquid Pu nitrate by truck and rail in the U.S. In the analysis method used, the system is described, potential release sequences are identified and evaluated (fault tree used), and the system risk is assessed. It is concluded that: there is little difference in risk in shipping PuO 2 by rail and by truck; there also is little change in risk in shipping PuO 2 by rail and by truck; there also is little change in risk for liquid shipment; the vermiculite loss is somewhat less important in rail shipment; and the response of the L-10 container to crush is more important in rail transport

OPTIMIZING TIME WINDOWS FOR MANAGING ARRIVALS OF EXPORT CONTAINERS AT CHINESE CONTAINER TERMINALS

DEFF Research Database (Denmark)

Chen, Gang; Yang, Zhongzhen

2009-01-01

of driver and truck waiting time, the cost of container cargo storage time, the truck idle cost and terminal yard fee. Secondly, to minimize the costs, a heuristic is developed based on a genetic algorithm to optimize the time window arrangement. The optimal solution involves the position and the length...... window management programme that is widely used in Chinese terminals to facilitate the terminal operations and the truck delivery operations. Firstly, the arrangement of time windows is assumed to follow the principle of minimizing the transport costs. A cost function is defined that includes the cost...

Fuel Cell Powered Lift Truck

Energy Technology Data Exchange (ETDEWEB)

Moulden, Steve [Sysco Food Service, Houston, TX (United States)

2015-08-20

This project, entitled “Recovery Act: Fuel Cell-Powered Lift Truck Sysco (Houston) Fleet Deployment”, was in response to DOE funding opportunity announcement DE-PS36-08GO98009, Topic 7B, which promotes the deployment of fuel cell powered material handling equipment in large, multi-shift distribution centers. This project promoted large-volume commercialdeployments and helped to create a market pull for material handling equipment (MHE) powered fuel cell systems. Specific outcomes and benefits involved the proliferation of fuel cell systems in 5-to 20-kW lift trucks at a high-profile, real-world site that demonstrated the benefits of fuel cell technology and served as a focal point for other nascent customers. The project allowed for the creation of expertise in providing service and support for MHE fuel cell powered systems, growth of existing product manufacturing expertise, and promoted existing fuel cell system and component companies. The project also stimulated other MHE fleet conversions helping to speed the adoption of fuel cell systems and hydrogen fueling technology. This document also contains the lessons learned during the project in order to communicate the successes and difficulties experienced, which could potentially assist others planning similar projects.

Work-related musculoskeletal discomfort among heavy truck drivers.

Science.gov (United States)

Nazerian, Ramtin; Korhan, Orhan; Shakeri, Ehsan

2018-03-13

Heavy truck drivers are exposed to various psychological, psychosocial and physiological factors, some of which can cause musculoskeletal discomfort in different body regions. This study aims to investigate the correlation between different factors of musculoskeletal discomfort in heavy truck drivers. A cross-sectional study design was applied. A total of 384 participants were interviewed using an updated version of the Nordic musculoskeletal questionnaire. While hypothesis testing was used to assess the association of different factors in musculoskeletal discomfort, logistic regression was applied to explore different correlations among questions of the survey. The results demonstrate that hours of exposure to vibration were associated with discomfort in the neck and shoulders (p  0.05. Fifty-seven percent of the drivers were suffering from discomfort in their lower back region. Moreover, seat comfort was found to be highly correlated with discomfort in the neck, shoulder and upper back areas. Additionally, with aging the likelihood of experiencing discomfort in the neck, upper back and knees is increased.

Determinants of fuel consumption in mining trucks

International Nuclear Information System (INIS)

Dindarloo, Saeid R.; Siami-Irdemoosa, Elnaz

2016-01-01

Analysis of fuel consumption in a large surface mine, during more than 5000 cycles of material transportation, revealed considerable variability in the data. Truck fuel estimation based on the mining truck manufacturers' manuals/estimates is not capable of capturing this variability in the fuel consumption data. Partial least squares regression and autoregressive integrated moving average methods were employed to examine the effect of cyclic activities on fuel consumption, and to recommend relevant remedies for consumption reduction. Proper modifications of the operation can result in improved cycle times. Consequently, minimizing some cyclic activities would enhance energy efficiency. The truck “empty idle time” was a major contributor to unnecessary fuel consumption. Since the truck queues at shovels are a major component of the “empty idle time”, decisions should be reviewed to reduce the truck queues at loading points. Improved dispatching strategies, optimal muck pile shape and size distribution, and improved shovel/loader operator skills are effective preventive measures to minimize truck flow bottlenecks at loading points, and thus to improve energy efficiency at mines. - Highlights: • A large fleet of mining trucks consumes considerable amounts of energy. • Current energy models do not consider the effect of site-specific mining conditions. • A new methodology based on material handling cyclic activities is proposed. • Fuel consumption rates in different truck operating modes are determined. • The new model is compared with the truck manufacturer's energy consumption guideline.

Cross-sectional measurement of grain boundary segregation using WDS

Energy Technology Data Exchange (ETDEWEB)

Christien, F., E-mail: frederic.christien@emse.fr [Laboratoire Georges Friedel, CNRS, Ecole des Mines de Saint-Etienne, 158 Cours Fauriel, 42023 Saint-Etienne (France); Risch, P. [Institut des Matériaux Jean Rouxel (IMN), CNRS, Université de Nantes, Rue Christian Pauc, 44306 Nantes (France)

2016-11-15

A new method is proposed for the quantification of grain boundary segregation using Wavelength Dispersive Spectroscopy (WDS) in a Scanning Electron Microscope (SEM). Analyses are undertaken on a simple metallographically polished section of material. The method is demonstrated for the model system of sulphur segregation to nickel grain boundaries. Quantification was carried out from sulphur concentration profiles acquired across 11 grain boundaries of a nickel specimen containing 5.4 wt ppm of sulphur in the bulk and equilibrated at 550 °C. The average sulphur grain boundary concentration determined is µ=35.2 ng cm{sup −2}=6.6×10{sup 14} atoms cm{sup −2}≈0.5 monolayer, which is in good agreement with a previous quantification obtained from SIMS (Secondary Ion Mass Spectrometry) on the same material. However this is lower by a factor of two than the quantification obtained using “surface” techniques on fractured specimens of the same material. With the conditions of analysis used in this study, the limit of detection of the method developed is found to be better than 10% of a sulphur monolayer. - Highlights: • Impurity grain boundary segregation can be measured using WDS in a SEM. • The method proposed is quantitative. • The specimen preparation is simple: metallographical section.

19 CFR 123.41 - Truck shipments transiting Canada.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Truck shipments transiting Canada. 123.41 Section... OF THE TREASURY CUSTOMS RELATIONS WITH CANADA AND MEXICO United States and Canada In-Transit Truck Procedures § 123.41 Truck shipments transiting Canada. (a) Manifest required. Trucks with merchandise...

Mitigating Wind Induced Truck Crashes

Science.gov (United States)

2009-12-25

Dangerous weather and high wind in particular, is a common contributing factor in truck crashes. High wind speeds have been documented as a perennial cause of truck crashes in Kansas and other Great Plains states. The possibility of reducing such cra...

Becoming at the Borders: the Role of Positioning in Boundary-Crossing between University and Workplaces

Directory of Open Access Journals (Sweden)

Amenduni F.,

2017-08-01

Full Text Available Boundaries-crossing from university to workplaces is one of the most meaningful crisis for the professional development of the young people. Students need to develop cultural tools to solve their inner conflicts typical of this phase. In this study, the Dialogical Self Theory is used, inspired by Bakhtin, to define cross-boundaries in terms of identity positions development. The Trialogical Learning Approach is applied to design collaborative activities implemented during the course, aimed at building professional objects, designed together with some companies. During the course, students are required to build and maintain e-portfolios, which we consider as the place where cross-boundaries of I-positions can be observed. One case is selected as representative of the trajectories toward the so-called trialogical position that has a professional nature and takes into account the objects built. The results show an expansion of the student identity position repertoire, including future, professional and collective positions. Furthermore, the object designed with the company is perceived as a boundary-object that supports the shift from present to future positions and from university to professional communities.

Truck-mounted Area-wide Application of Pyriproxyfen Targeting Aedes aegypti and Aedes albopictus in Northeast Florida

Science.gov (United States)

2014-12-01

TRUCK-MOUNTED AREA-WIDE APPLICATION OF PYRIPROXYFEN TARGETING AEDES AEGYPTI AND AEDES ALBOPICTUS IN NORTHEAST FLORIDA1 CARL W. DOUD,2,3 ANTHONY M...truck-mounted ultra-low volume applications of pyriproxyfen against Aedes aegypti larvae in artificial water containers and wild adult Ae. albopictus...larval control, Aedes aegypti, Aedes albopictus INTRODUCTION Aedes albopictus (Skuse) (Asian tiger mosquito) and Ae. aegypti (L.) (yellow fever

Implementation of exclusive truck facilities

Energy Technology Data Exchange (ETDEWEB)

Fekpe, E. [Battelle Memorial Inst., Columbus, OH (United States). Transportation Market Sector

2007-07-01

This paper discussed the issue of highway congestion, safety, and efficiency in freight movement on highways, with particular reference to the challenge of supporting increasing capacity demand from truck traffic. Innovative and practical solutions are needed to address the growing need for more efficient freight movement while maintaining acceptable levels of safety on highways. The concept of exclusive truck facilities (ETFs) is becoming an attractive option as a feasible strategy to help stabilize traffic flow, reduce congestion, improve safety, enhance transportation system management, improve access to freight facilities, and improve efficiency in freight movement along corridors of national importance. ETFs can either be truck only lanes or truckways. Passenger cars may not use ETFs. However, the use of ETFs could involve high costs of construction, maintenance, and acquisition of additional right of way. A cost-benefit analysis was performed for alternative ETF configurations under different traffic and site characteristics. A set of criteria was then proposed for identifying suitable locations for exclusive truck lanes. It was proposed that ETFs are economically feasible at locations with traffic volume of 100,000 vehicles per day or more and with a truck volume of at least 25 per cent of the traffic. In addition, the rate of truck-involved fatal crashes and level of service should be used to prioritize preliminary candidate locations that satisfy the traffic criteria. Consideration should also be given to the existence of freight terminals, ports, processing centers or regional distribution centres that are close to highways. 11 refs., 1 tab.

Crossing of the cosmological constant boundary-an equation of state description

International Nuclear Information System (INIS)

Stefancic, Hrvoje

2006-01-01

The phenomenon of the dark energy transition between the quintessence regime (w > -1) and the phantom regime (w < -1), also known as the cosmological constant boundary crossing, is analysed in terms of the dark energy equation of state. It is found that the dark energy equation of state in the dark energy models which exhibit the transition is implicitly defined. The generalizations of the models explicitly constructed to exhibit the transition are studied to gain insight into the mechanism of the transition. It is found that the cancellation of the terms corresponding to the cosmological constant boundary makes the transition possible

Fuel Cell Hydroge Manifold for Lift Trucks

DEFF Research Database (Denmark)

Hosseinzadeh, Elham

. Battery driven lift trucks are being used more and more in different companies to reduce their emissions. However, battery driven lift trucks need long time to recharge and may be out of work for a long time. Fuel cell driven lift trucks diminish this problem and are therefore getting more attention...

Health survey of U.S. long-haul truck drivers: work environment, physical health, and healthcare access.

Science.gov (United States)

Apostolopoulos, Yorghos; Sönmez, Sevil; Shattell, Mona M; Gonzales, Clifford; Fehrenbacher, Caitlin

2013-01-01

While trucking in industrialized nations is linked with driver health afflictions, the role of trucking in U.S. truckers' health remains largely unknown. This paper sheds light on links between the trucking work environment and drivers' physical health. Using a cross-sectional design, 316 truckers were enrolled in the Healthy Trucker Survey. Questions included work history, physical and mental health, and healthcare access. PASW 18 was used to examine patterns among factors. 316 truckers participated. Respondents were mainly full-time, long-haul drivers with over 5 years of experience, and who spent over 17 days on the road per month. While almost 75% described their health as good, 83.4% were overweight/obese, 57.9% had sleeping disturbances, 56.3% fatigue, 42.3% musculoskeletal disorders, and about 40% cardiovascular disease concerns. About 33% had no health insurance, 70% had no regular healthcare visits, 24.4% could not afford insurance, and 42.1% took over-the-counter drugs when sick, while 20.1% waited to reach home for medical care. Exercise facilities were unavailable in over 70% of trucking worksites and 70% of drivers did not exercise regularly. The trucking occupation places drivers at high risk for poor health outcomes. Prospective studies are needed to delve into how continued exposure to trucking influences the progression of disease burden.

Using complexity science and negotiation theory to resolve boundary-crossing water issues

Science.gov (United States)

Islam, Shafiqul; Susskind, Lawrence

2018-07-01

Many water governance and management issues are complex. The complexity of these issues is related to crossing of multiple boundaries: political, social and jurisdictional, as well as physical, ecological and biogeochemical. Resolution of these issues usually requires interactions of many parties with conflicting values and interests operating across multiple boundaries and scales to make decisions. The interdependence and feedback among interacting variables, processes, actors and institutions are hard to model and difficult to forecast. Thus, decision-making related to complex water problems needs be contingent and adaptive. This paper draws on a number of ideas from complexity science and negotiation theory that may make it easier to cope with the complexities and difficulties of managing boundary crossing water disputes. It begins with the Water Diplomacy Framework that was developed and tested over the past several years. Then, it uses three key ideas from complexity science (interdependence and interconnectedness; uncertainty and feedback; emergence and adaptation) and three from negotiation theory (stakeholder identification and engagement; joint fact finding; and value creation through option generation) to show how application of these ideas can help enhance effectiveness of water management.

South Coast Air Quality Management District Truck Testing | Transportation

Science.gov (United States)

Research | NREL South Coast Air Quality Management District Truck Evaluation South Coast Air Quality Management District Truck Evaluation Photo of heavy-duty truck cab. Electric drayage truck Cargo Transportation project, conducted in partnership with the South Coast Air Quality Management

The Myth - Food Truck

OpenAIRE

Otálora Salgado, Esteban

2015-01-01

Food truck de comida típica colombiana fusión que espera solucionar la percepción que se tiene acerca de la comida callejera. Para ello, se ha realizado un estudio donde se identifica el problema y se plantea como solución la creación de un food truck que cumpla con todos los estándares de calidad y a su vez innove.

A randomized controlled trial to evaluate the relative efficacy of adding voluntary counseling and testing (VCT) to information dissemination in reducing HIV-related risk behaviors among Hong Kong male cross-border truck drivers.

Science.gov (United States)

Lau, Joseph T F; Tsui, Hi Yi; Cheng, Shannon; Pang, Margaret

2010-01-01

Mobile populations are vulnerable to contracting HIV. The present study aims to evaluate the relative efficacy of the voluntary counseling and testing plus information dissemination (VCT-ID) approach versus the information dissemination (ID) approach for promoting HIV preventive behaviors in a mobile population, cross-border truck drivers. A total of 301 adult male cross-border truck drivers who self-reported having had sex with female sex workers (FSW) or non-regular sex partners (NRPs) in mainland China in the last 12 months were recruited and randomized into the VCT-ID intervention group (Group I) or ID control group (Group C). Anonymous structured questionnaires, administered through a computer-assisted method, were used to collect data. At the follow-up survey (about 8-9 weeks since the baseline survey), Group I participants, as compared to Group C participants, were more likely to be consistent condom users when having sex with FSW (85.5% versus 68.5%, p<0.05) and with NRP (54.8% versus 36.4%, p<0.1), more knowledgeable about HIV, and were less likely to have contracted sexually transmitted diseases (STD) in the last two months. The VCT-ID approach is shown to be more efficacious than the ID approach in promoting safer sex and HIV-related knowledge among local cross-border truck drivers. Feasibility of providing voluntary counseling and testing (VCT) services at locations which are convenient to the target population is demonstrated. It also shows that VCT services can be used as a means of HIV prevention. The findings of this study resulted in up-scaled VCT services for the local target population.

Ulysses' rapid crossing of the polar coronal hole boundary

International Nuclear Information System (INIS)

McComas, D.J.; Riley, P.; Gosling, J.T.; Balogh, A.; Forsyth, R.

1998-01-01

The Ulysses spacecraft crossed from the slow dense solar wind characteristic of the solar streamer belt into the fast, less dense flow from the northern polar coronal hole over a very short interval (several days) in late March 1995. The spacecraft, which was at 1.35 AU and ∼19 degree north heliographic latitude, moving northward in its orbit, remained in the fast solar wind from then through summer 1996. This boundary crossing is unique in that the combination of the spacecraft motion and rotation of the structure past the spacecraft caused Ulysses to move smoothly and completely from one regime into the other. In this study we examine this crossing in detail. The crossing is marked by a region of enhanced pressure, typical of stream interaction regions, which extends ∼2x10 7 km across. We find that the transition between the slow and fast regimes occurs on several temporal, and hence spatial, scales. On the shortest scale ( 4 km) the stream interface is a tangential discontinuity where the proton and core electron densities and ion and electron pressures all drop while the magnetic pressure jumps to maintain a rough pressure balance. The alpha to proton ratio also jumps across the stream interface to reach the comparatively constant polar hole value of ∼4.3%. On larger scales (a few x10 6 km) the proton and alpha temperatures rise to their high-speed wind values. Finally, on the largest scale (∼10 8 km) the solar wind speed ramps up from ∼400kms -1 to ∼750kms -1 , typical of polar hole flows. While it seems likely that the stream interface maps back to a sharp boundary near the Sun, the large region of increasing flow speed suggests that there is also an extended gradient in solar wind source speed close to the Sun. copyright 1998 American Geophysical Union

Raley's LNG Truck Site Final Data Report

Energy Technology Data Exchange (ETDEWEB)

Battelle

1999-07-01

Raley's is a 120-store grocery chain with headquarters in Sacramento, California, that has been operating eight heavy-duty LNG trucks (Kenworth T800 trucks with Cummins L10-300G engines) and two LNG yard tractors (Ottawa trucks with Cummins B5.9G engines) since April 1997. This report describes the results of data collection and evaluation of the eight heavy-duty LNG trucks compared to similar heavy-duty diesel trucks operating at Raley's. The data collection and evaluation are a part of the U.S. Department of Energy (DOE)/National Renewable Energy Laboratory (NREL) Alternative Fuel Truck Evaluation Project.

A tough truck for ATLAS

CERN Multimedia

2003-01-01

One of the mobile support structures that will be used to manoeuvre and assemble components of the ATLAS detector in its cavern was put through its paces at the end of July and passed its load tests with flying colours. The tests, which involved the surveyors taking measurements to detect any load-induced mechanical deformations, were carried out in Building 191. "The "truck" has been subjected to static tests with loads of up to 1250 tonnes and can carry and transport on air cushions a nominal load of up to 1000 tonnes at a top speed of 30 cm per minute," explains project leader Tommi Nyman. "It took two weeks to assemble the truck's components, the last of which arrived at CERN on 24 June. It then took a further 20 days to load the truck up for the test." The 8.5 metre-high truck will be used for final assembly of some of the ATLAS components, including the calorimeters, in cavern UX15. This powerful device is the result of a collaboration between CERN and the Henryk Niewodniczanski Institute of Nuclear ...

Boundary crossing and learning identities – digital storytelling in primary schools

Directory of Open Access Journals (Sweden)

Anne Mette Bjørgen

2010-11-01

Full Text Available This article contributes to academic discussions on how digital storytelling in an educational setting may have potential to build and develop learning identities, agency and digital competences. With a socio-cultural framework on learning and identity as a point of departure, the article sets out to study these issues approached as boundary crossing between the intersecting contexts of leisure time and school. The analysis draws on three examples of digital storytelling among 5th - 7th graders in three Norwegian primary school classes. My findings suggest that digital storytelling might represent a boundary crossing enabling pupils to adopt new roles as producers of creative content, as mentors or guides, to explore new technology and software in a context different from that of outside school and to learn and develop competences related to production processes and multimodal resources. I argue that digital storytelling has a potential to contribute to learning, learning identity and agency, provided it is based on a more fully developed pedagogical strategy of carefully linking school and leisure time.

Conflict in the Currents: The Cross-boundary Consequences of Larval Dispersal

Science.gov (United States)

Rising, J. A.; Ramesh, N.; Dookie, D.

2016-02-01

As commercial fish populations decline in many regions, the increasing demand for ocean resources can create conflicts along international boundaries. Because fish stock ranges do not respect political boundaries, neighboring countries can impact each other through the management of the stocks within their exclusive economic zones. By combining spawning and larvae information from the FishBase database with current velocities from ocean reanalyses using a particle tracking scheme, we construct a measure of the cross-boundary diffusion of fish larvae for 40 major exploited species. These flows represent important connections both for fish populations and for fisheries and the people who depend on them, but these connections rely on fisheries management in the 'source' countries. We then use socioeconomic data on the national importance of these fish to identify hotspots for potential conflict. Finally, we consider how ranges will shift under climate change, and the social impacts of these shifts.

Toxoplasma gondii infection in interstate truck drivers: a case-control seroprevalence study.

Science.gov (United States)

Alvarado-Esquivel, Cosme; Pacheco-Vega, Sandy Janet; Hernández-Tinoco, Jesús; Salcedo-Jáquez, Misael; Sánchez-Anguiano, Luis Francisco; Berumen-Segovia, Luis Omar; Rábago-Sánchez, Elizabeth; Liesenfeld, Oliver

2015-02-05

Infection with Toxoplasma gondii can be acquired via the ingestion of undercooked or raw meat containing tissue cysts, or via ingestion of water contaminated with oocysts. Professional long distance truck driving may have epidemiological importance for food-borne infections since drivers eat out of home and in places where hygiene and cooking practices are uncertain. We aimed to determine whether interstate truck drivers in Durango, Mexico have an increased risk of infection with T. gondii as indicated by seropositivity; and to determine the socio-demographic, work, clinical, and behavioral characteristics associated with T. gondii seropositivity in interstate truck drivers. Through a case-control study design, 192 truck drivers and 192 controls from the general population of the same region matched by gender and age were examined with enzyme-linked immunoassays for the presence of anti-Toxoplasma IgG and IgM antibodies. Socio-demographic, work, clinical and behavioral characteristics from the truck drivers were obtained. Anti-T. gondii IgG antibodies were found in 23 (12.0%) of 192 truck drivers and in 13 (6.8%) of 192 controls (OR = 21.0; 95% CI: 1.23-358.38; P = 0.002). Anti-T. gondii IgM antibodies were found in 7 (3.6%) cases and in 7 (3.6%) controls (P = 1.00). The seroprevalence of T. gondii infection was higher in drivers with reflex impairment than in those without this impairment (4/13, 30.8% vs 19/179, 10.6%, respectively; P = 0.05), and in drivers with hearing impairment than in those without this impairment (3/7, 42.9% vs 20/185, 10.8%, respectively; P = 0.03). Multivariate analysis of work and behavioral characteristics of truck drives showed positive associations of T. gondii exposure with trips to the south of Mexico (OR = 3.11; 95% CI: 1.02-9.44; P = 0.04) and consumption of horse meat (OR = 5.18; 95% CI: 1.62-16.55; P = 0.005). Results suggest that interstate truck drivers may have an increased risk for T

Measurement of stress distributions in truck tyre contact patch in real rolling conditions

Science.gov (United States)

Anghelache, Gabriel; Moisescu, Raluca

2012-12-01

Stress distributions on three orthogonal directions have been measured across the contact patch of truck tyres using the complex measuring system that contains a transducer assembly with 30 sensing elements placed in the road surface. The measurements have been performed in straight line, in real rolling conditions. Software applications for calibration, data acquisition, and data processing were developed. The influence of changes in inflation pressure and rolling speed on the shapes and sizes of truck tyre contact patch has been shown. The shapes and magnitudes of normal, longitudinal, and lateral stress distributions, measured at low speed, have been presented and commented. The effect of wheel toe-in and camber on the stress distribution results was observed. The paper highlights the impact of the longitudinal tread ribs on the shear stress distributions. The ratios of stress distributions in the truck tyre contact patch have been computed and discussed.

Naturalistic Study of Truck Following Behavior

Science.gov (United States)

2016-04-01

Volpe conducted the Naturalistic study of truck following behavior to gain a better understanding of how trucks follow other vehicles in the real world, with the ultimate goal of supporting the Federal Highway Administration in the development of aut...

Heavy truck rollover characterization (phase B).

Science.gov (United States)

2009-09-01

The Heavy Truck Rollover Characterization Study - Phase-B builds on the results of prior phases of research. Phases 1 and 2 (Funded by Federal Highway Administration) involved heavy truck rollover characterization for a tractor and box-trailer; and P...

Prospects of development of land driverless trucks

Science.gov (United States)

Bakhmutov, S.; Saykin, A.; Endachev, D.; Evgrafov, V.; Shagurin, A.; Kulikov, I.; Fedoseev, K.

2018-02-01

The paper is dedicated to the problem of creation and efficient use of driverless trucks. It also contains general analysis of foreign experience and development trends. The concept of FSUE “NAMI” for development of a platoon of driverless trucks for cargo transportation between specialized terminals on public roads is provided. A road train with virtual couplings where the lead vehicle has a driver and the rest are driverless is proposed as a base for the driverless platoon. The platoon is formed by such road trains, which ensures extended functional features, including the possibility to form platoons of road trains from different logistics centers and with different destinations, quick reforming of the platoon in the logistics centers, possibility to split the platoon when driving on public roads, higher precision of control over the platoon during driving, etc. It is also shown that in order to improve the efficiency of cargo transportation, driverless cargo platforms (trucks) shall be designed without a cabin. The paper also considers the ways to reduce the price of driverless trucks by creating a special road infrastructure, which will allow transfer of the most expensive subsystems of driverless vehicles to such infrastructure. Upon that, the following subsystems will remain within the driverless chassis: navigation, communication, chassis control and ADAS. It is noted that creation of such infrastructure will require high investments, therefore, gradual implementation of such systems is seen as rational. It is shown that the most appropriate area for these purposes is transregional cargo transportation. It is noted that the economic reasons for implementation of the proposed concept are as follows: significant reduction of the number of drivers; significant simplification of the driverless platform control system and reduction of the price of subsystems; no need for the driver’s cabin within the driverless platform; fuel economy when driving within a

System for selection of radiation source transfer trucks

International Nuclear Information System (INIS)

Tanimoto, Yoshinori; Ito, Kojiro.

1970-01-01

A device for selection of trucks each of which load and transfer a radiation source to an irradiation room above a water pool is installed at the end of a pair of rails fixed to the bottom of the pool. This device is equipped with a number of laterally shiftable rail pairs which may be brought into successive alignment with the fixed rails and is adapted to receive, carry and fix a truck on each rail pair. If one of said trucks is selected for irradiation in a desired irradiation room, the rail pair carrying this truck is shifted to align and couple with the fixed rail pair whereupon the truck is driven and transferred to a position on the fixed rails below the desired room and elevated thereinto. Accordingly, a plurality of trucks can optionally be shunted on a line of fixed rails without unloading the respective radiation sources. (Ohno, Y.)

Trusted Truck(R) II (phase A).

Science.gov (United States)

2009-01-01

The Trusted Truck Program was initiated in 2003 as a joint effort by NTRCI, Volvo and UT. The vision of the Trusted Truck program is to develop a secure and "trusted" transport solution from pickup to delivery. The program's objective is to incre...

Idle emissions from medium heavy-duty diesel and gasoline trucks.

Science.gov (United States)

Khan, A B M S; Clark, Nigel N; Gautam, Mridul; Wayne, W Scott; Thompson, Gregory J; Lyons, Donald W

2009-03-01

Idle emissions data from 19 medium heavy-duty diesel and gasoline trucks are presented in this paper. Emissions from these trucks were characterized using full-flow exhaust dilution as part of the Coordinating Research Council (CRC) Project E-55/59. Idle emissions data were not available from dedicated measurements, but were extracted from the continuous emissions data on the low-speed transient mode of the medium heavy-duty truck (MHDTLO) cycle. The four gasoline trucks produced very low oxides of nitrogen (NOx) and negligible particulate matter (PM) during idle. However, carbon monoxide (CO) and hydrocarbons (HCs) from these four trucks were approximately 285 and 153 g/hr on average, respectively. The gasoline trucks consumed substantially more fuel at an hourly rate (0.84 gal/hr) than their diesel counterparts (0.44 gal/hr) during idling. The diesel trucks, on the other hand, emitted higher NOx (79 g/hr) and comparatively higher PM (4.1 g/hr), on average, than the gasoline trucks (3.8 g/hr of NOx and 0.9 g/hr of PM, on average). Idle NOx emissions from diesel trucks were high for post-1992 model year engines, but no trends were observed for fuel consumption. Idle emissions and fuel consumption from the medium heavy-duty diesel trucks (MHDDTs) were marginally lower than those from the heavy heavy-duty diesel trucks (HHDDTs), previously reported in the literature.

Vortex statistics for turbulence in a container with rigid boundaries

DEFF Research Database (Denmark)

Clercx, H.J.H.; Nielsen, A.H.

2000-01-01

The evolution of vortex statistics for decaying two-dimensional turbulence in a square container with rigid no-slip walls is compared with a few available experimental results and with the scaling theory of two-dimensional turbulent decay as proposed by Carnevale et al. Power-law exponents......, computed from an ensemble average of several numerical runs, coincide with some experimentally obtained values, but not with data obtained from numerical simulations of decaying two-dimensional turbulence with periodic boundary conditions....

MCDA APPLIED TO PERFORMANCE APPRAISAL OF SHORT-HAUL TRUCK DRIVERS: A CASE STUDY IN A PORTUGUESE TRUCKING COMPANY

Directory of Open Access Journals (Sweden)

Raquel Morte

2015-03-01

Full Text Available Performance appraisal increasingly assumes a more important role in any organizational environment. In the trucking industry, drivers are the company's image and for this reason it is important to develop and increase their performance and commitment to the company's goals. This paper aims to create a performance appraisal model for trucking drivers, based on a multi-criteria decision aid methodology. The PROMETHEE and MMASSI methodologies were adapted using the criteria used for performance appraisal by the trucking company studied. The appraisal involved all the truck drivers, their supervisors and the company's Managing Director. The final output is a ranking of the drivers, based on their performance, for each one of the scenarios used. The results are to be used as a decision-making tool to allocate drivers to the domestic haul service.

Computer simulations of a generic truck cask in a regulatory fire using the Container Analysis Fire Environment (CAFE) code

International Nuclear Information System (INIS)

Ju, H.; Greiner, M.; Suo-Anttila, A.

2002-01-01

The Container Analysis Fire Environment (CAFE) computer code is designed to predict accurately convection and radiation heat transfer to a thermally massive object engulfed in a large pool fire. It is well suited for design and risk analyses of spent nuclear fuel transport systems. CAFE employs computational fluid dynamics and several fire and radiation models. These models must be benchmarked using experimental results. In this paper, a set of wind velocity conditions are determined which allow CAFE accurately to reproduce recent heat transfer measurements for a thick walled calorimeter in a ST-1 regulatory pool fire. CAFE is then used to predict the response of an intack (thin walled) generic legal weight truck cask. The maximum temperatures reached by internal components are within safe limits. A simple 800 deg. C, grey-radiation fire model gives maximum component temperatures that are somewhat below those predicted by CAFE. (author)

Tension in the tie-down chains of a shipping container for hazardous material

International Nuclear Information System (INIS)

Lo, T.Y.

1995-01-01

Chains are frequently used to tie the shipping containers of hazardous material to a truck bed. The tie-down system is nonlinear when the container is subjected to a triaxial force during transit. It is nonlinear because chains cannot carry compressive force, and the base of the container may partially lift off from the truck bed. A method was developed to calculate the amount of tension in the chains. This methodology includes three assumptions: (1) No friction exists between the container and the truck bed; (2) The container and the truck bed are rigid; and (3) All chains are properly tightened (i.e., no slacks) during preparation for shipment. The methodology employs an iterative process of a linear tie-down system. This linear system is derived from the nonlinear system with two additional assumptions: (a) All chains can carry compression as well as tension; and (b) There is a point contact between the container and the truck bed. This linear system has a closed-form solution. After the first solution of the linear system is obtained, the unreasonable, or physically impossible, rotational degree of freedom of the container and the chains with compressive force are eliminated in the follow-up iterative calculations using the same linear system. Unreasonable rotation is detected when the results indicate a rotation of the container into the truck bed. Zero rotational value is assigned to this degree of freedom in the follow-up iterations. For chains under compression, the chain length is replaced with a fictitiously large value because a long chain carries essentially no load. This process usually needs only two or three iterations and can easily be carried out in a spread sheet using such programs as Microsoft Excel or LOTUS 123

Acceptance test procedure for core sample trucks

International Nuclear Information System (INIS)

Smalley, J.L.

1995-01-01

The purpose of this Acceptance Test Procedure is to provide instruction and documentation for acceptance testing of the rotary mode core sample trucks, HO-68K-4600 and HO-68K-4647. The rotary mode core sample trucks were based upon the design of the second core sample truck (HO-68K-4345) which was constructed to implement rotary mode sampling of the waste tanks at Hanford. Acceptance testing of the rotary mode core sample trucks will verify that the design requirements have been met. All testing will be non-radioactive and stand-in materials shall be used to simulate waste tank conditions. Compressed air will be substituted for nitrogen during the majority of testing, with nitrogen being used only for flow characterization

Application of Chaos Theory in Trucks' Overloading Enforcement

Directory of Open Access Journals (Sweden)

Abbas Mahmoudabadi

2013-01-01

Full Text Available Trucks' overloading is considered as one of the most substantial concerns in road transport due to a possible road surface damage, as well as, are less reliable performance of trucks' braking system. Sufficient human resource and adequate time scheduling are to be planned for surveying trucks' overloading; hence, it seems required to prepare an all-around model to be able to predict the number of overloaded vehicles. In the present research work, the concept of chaos theory has been utilized to predict the ratio of trucks which might be guessed overloaded. The largest Lyapunov exponent is utilized to determine the presence of chaos using experimental data and concluded that the ratio of overloaded trucks reflects chaotic behavior. The prediction based on chaos theory is compared with the results of simple smoothing and moving average methods according to the well-known criterion of mean square errors. The results have also revealed that the chaotic prediction model would act more capably comparing the analogous methods including simple smoothing and moving average to predict the ratio of passing trucks to be possibly overloaded.

Norcal Prototype LNG Truck Fleet: Final Results

Energy Technology Data Exchange (ETDEWEB)

2004-07-01

U.S. DOE and National Renewable Energy Laboratory evaluated Norcal Waste Systems liquefied natural gas (LNG) waste transfer trucks. Trucks had prototype Cummins Westport ISXG engines. Report gives final evaluation results.

Developing a GPS-based truck freight performance measure platform.

Science.gov (United States)

2010-05-01

Although trucks move the largest volume and value of goods in urban areas, relatively little is known about their travel : patterns and how the roadway network performs for trucks. Global positioning systems (GPS) used by trucking : companies to mana...

Towards an autonomous system for handling inter-terminal container transport

NARCIS (Netherlands)

dr. J.H.R. van Duin; ir. F.G. Rieck; A. Spruit

2017-01-01

As part of the National Transition Board Practice Research Raak/SIA program, the INTRALOG (intelligent Truck Application in Logistics) project investigated the practical application of zero emission Automatic Guided Trucks (AGTs) for the transport of containers in the Harbour Industrial Cluster

Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas

Science.gov (United States)

Tree Biodiesel Truck Transports Capitol Christmas Tree to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas Tree on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Truck Transports Capitol Christmas Tree on Twitter Bookmark Alternative

Upgrades for truck transportation of SNM in the Russian Federation

International Nuclear Information System (INIS)

Gardner, B.H.; Kornilovich, E.

1998-01-01

The goal of this project is the rapid reduction of risk to truck transportation of SNM in Russia. Enhanced protection is being accomplished by cooperation between the US Department of Energy, MINATOM of Russia, the Russian Ministry of Defense, and various Russian Institutes. This program provides an integrated program of specialized trucks that are equipped with hardened overpack (SNM vault) containers, alarm and communications systems, and armored cabs. Armored escort vehicles are also provided to increase the survivability of the guards escorting convoys. Only indigenous Russian equipment, modified and/or manufactured by Designing Bureau for Motor Vehicle Transport Equipment (KBATO), is provided under this program. The US will not provide assistance in the truck transportation arena without a commitment from the Russian facility to provide heavily armed escorts for SNM movement. Each site conducts a detailed transportation needs assessment study that is used as the basis for prioritizing assistance. The Siberian Chemical Combine (Tomsk-7) was the initial site of cooperation. The designs used at Tomsk-7 are serving as the baseline for all future vehicles modified under this program. In FY98, many vehicles systems have been ordered for various institutes. Many additional systems will be ordered in FY99

Trucks involved in fatal accidents factbook 2008.

Science.gov (United States)

2011-03-01

This document presents aggregate statistics on trucks involved in traffic accidents in 2008. The : statistics are derived from the Trucks Involved in Fatal Accidents (TIFA) file, compiled by the : University of Michigan Transportation Research Instit...

Trucks involved in fatal accidents factbook 2007.

Science.gov (United States)

2010-01-01

This document presents aggregate statistics on trucks involved in traffic accidents in 2007. The : statistics are derived from the Trucks Involved in Fatal Accidents (TIFA) file, compiled by the : University of Michigan Transportation Research Instit...

Truck Thermoacoustic Generator and Chiller

Energy Technology Data Exchange (ETDEWEB)

Keolian, Robert

2011-03-31

This Final Report describes the accomplishments of the US Department of Energy (DOE) cooperative agreement project DE-FC26-04NT42113 - Truck Thermoacoustic Generator and Chiller - whose goal is to design, fabricate and test a thermoacoustic piezoelectric generator and chiller system for use on over-the-road heavy-duty-diesel trucks, driven alternatively by the waste heat of the main diesel engine exhaust or by a burner integrated into the thermoacoustic system. The thermoacoustic system would utilize engine exhaust waste heat to generate electricity and cab air conditioning, and would also function as an auxiliary power unit (APU) for idle reduction. The unit was to be tested in Volvo engine performance and endurance test cells and then integrated onto a Class 8 over-the-road heavy-duty-diesel truck for further testing on the road. The project has been a collaboration of The Pennsylvania State University Applied Research Laboratory, Los Alamos National Laboratory, Clean Power Resources Inc., and Volvo Powertrain (Mack Trucks Inc.). Cost share funding was provided by Applied Research Laboratory, and by Clean Power Resources Inc via its grant from Innovation Works - funding that was derived from the Commonwealth of Pennsylvania. Los Alamos received its funding separately through DOE Field Work Proposal 04EE09.

75 FR 76518 - Volvo Trucks North America and Mack Trucks, Inc., Receipt of Petition for Decision of...

Science.gov (United States)

2010-12-08

... manufactured from March 1, 2007 through December 11, 2009. A total of 1,916 affected Volvo trucks were... trucks were manufactured from March 1, 2007, through December 11, 2009. A total 1,287 affected Mack... that their petition, to exempt them from providing recall notification of noncompliance as required by...

ANFO truck burn trials

Energy Technology Data Exchange (ETDEWEB)

Rosen von, B.; Contestabile, E. [Natural Resources Canada, CANMET Canadian Explosives Research Laboratory, Ottawa, ON (Canada)

2003-10-01

This report describes the investigation of a tractor-trailer explosion. A truck loaded with 18,000 kg of commercial explosives, of which 13,000 kg was ammonium nitrate with fuel oil (ANFO), caught fire when it struck a rockcut near Walden, Ontario on August 5, 1998. The fire resulted in the detonation of the load. The Canadian Explosives Research Laboratory (CERL) conducted a test program to examine the suitability of existing explosive transportation regulations. Unconfined burns of ANFO were performed. The accident was recreated in two burn trials in an attempt to identify the mechanism that led from fire to detonation. Two full-scale tests were conducted using complete tractor-trailers, each in a jack-knifed position with most of the explosives placed on the ground in front of the trailer. ANFO was used in the first test to determine its response to thermal stimulus and the likelihood of detonation or explosion. The second test involved ANFO, a slurry and an emulsion. Thermocouples and video cameras were used to observe the burning characteristics of the explosives, the truck and its components. The explosives burned steadily for 80 minutes in each test. Many truck components, such as tires, spring brake chambers and the fuel tank ruptured violently due to the heat. Although no detonation occurred in the test trials, it was concluded that under favourable conditions, many truck components, might produce fragments with enough energy to initiate heat-sensitized explosives. It was suggested that a fragment impact caused the detonation at Walden. 4 refs., 7 tabs., 8 figs.

Design and Validation Testing of TruckScan to Assay Large Sacks of Fukushima Radioactive Debris on a Truck

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Atsuo [Canberra-Japan (Japan); Bronson, Frazier [Canberra Industries Inc. (United States)

2015-07-01

As a result of the March 2011 earthquake and resulting tsunami in Japan, there was a serious accident at the Fukushima Dai-ichi Nuclear Power Plant. This accident has contaminated soil and vegetation in a wide area around the plant. Decontamination projects over the last 4 years have resulted in large numbers of 1 cubic meter canvas bags of debris, commonly called Super Sacks [SS]. These are currently stored nearby where they were generated, but starting in 2015, they will be moved to various Interim Storage Facilities [ISF]. Trucks will typically carry 8-20 of these SSs. When the trucks arrive at the ISF they need to be rapidly sorted into groups according to radioactivity level, for efficient subsequent processing. Canberra Industries, Inc. [CI] has designed a new truck monitoring system 'TruckScan' for use at these ISFs. The TruckScan system must measure the entire truck loaded with multiple closely packed SSs, and generate a nuclide specific assay report showing the radioactivity in each individual SS. The Canberra-Japan office, along with Obayashi Corporation have performed validation testing to demonstrate to the regulatory authorities that the proposed technique was sufficiently accurate. These validation tests were conducted at a temporary storage area in Fukushima prefecture. Decontaminated waste of various representative types and of various levels of radioactivity was gathered and mixed to create homogeneous volumes. These volumes were sampled multiple times and assayed with laboratory HPGe detectors to determine the reference concentration of each pile. Multiple SSs were loaded from each pile. Some of the SSs were filled 50% full, others 75% full, and others 100% full, to represent the typical loading configuration of the existing SSs in the field. The content of the SSs are either sand, soil, or vegetation with densities ranging from 0.3 g/cc - 1.6 g/cc. These SSs with known concentrations of Cs-134 and Cs-137 were then loaded onto trucks in

Design and Validation Testing of TruckScan to Assay Large Sacks of Fukushima Radioactive Debris on a Truck

International Nuclear Information System (INIS)

Suzuki, Atsuo; Bronson, Frazier

2015-01-01

As a result of the March 2011 earthquake and resulting tsunami in Japan, there was a serious accident at the Fukushima Dai-ichi Nuclear Power Plant. This accident has contaminated soil and vegetation in a wide area around the plant. Decontamination projects over the last 4 years have resulted in large numbers of 1 cubic meter canvas bags of debris, commonly called Super Sacks [SS]. These are currently stored nearby where they were generated, but starting in 2015, they will be moved to various Interim Storage Facilities [ISF]. Trucks will typically carry 8-20 of these SSs. When the trucks arrive at the ISF they need to be rapidly sorted into groups according to radioactivity level, for efficient subsequent processing. Canberra Industries, Inc. [CI] has designed a new truck monitoring system 'TruckScan' for use at these ISFs. The TruckScan system must measure the entire truck loaded with multiple closely packed SSs, and generate a nuclide specific assay report showing the radioactivity in each individual SS. The Canberra-Japan office, along with Obayashi Corporation have performed validation testing to demonstrate to the regulatory authorities that the proposed technique was sufficiently accurate. These validation tests were conducted at a temporary storage area in Fukushima prefecture. Decontaminated waste of various representative types and of various levels of radioactivity was gathered and mixed to create homogeneous volumes. These volumes were sampled multiple times and assayed with laboratory HPGe detectors to determine the reference concentration of each pile. Multiple SSs were loaded from each pile. Some of the SSs were filled 50% full, others 75% full, and others 100% full, to represent the typical loading configuration of the existing SSs in the field. The content of the SSs are either sand, soil, or vegetation with densities ranging from 0.3 g/cc - 1.6 g/cc. These SSs with known concentrations of Cs-134 and Cs-137 were then loaded onto trucks in

Effects of Variation in Truck Factor on Pavement Performance in Pakistan

Directory of Open Access Journals (Sweden)

Rabia Chaudry

2013-01-01

Full Text Available Seasonal variation coupled with heavy axle loading is the key factor in rapid road deterioration in Pakistan. The serviceability loss is further accelerated by the fact that truck drivers and owners consider overloading as a profitable practice unaware of the adverse effects of this practice. Weigh-in-motion data from two stations located between two major cities of Pakistan (Peshawar and Rawalpindi on Grand Trunk Road (N-5 were collected and analyzed. Analysis of variance and comparison of actual and designed truck factor were performed to identify the most damaging axle truck type. It was found that axle truck type 3 (single/tandem axle is most damaging among all truck types. The actual truck factor for axle truck type 3 is 6.4 times greater than design truck factor. Regression expressions of different forms were also investigated to determine the relationship between truck factor and gross vehicular weight for the specified truck types. An optimum generalization strategy was used to prevent over-generalization and ensure accuracy. For data analysis, 75% of data was used to develop regression models and remaining 25% was to validate those models. The results show that the polynomial expressions performed best and provide a robust relationship that can be employed by the highway authorities to estimate truck factor from gross vehicular weight with a high degree of confidence. It was also observed that damaging effect of various types of trucks was very severe and quite high.

Logistics of long-distance truck transportation of forest chips; Metsaehakkeen autokuljetuksen logistiikka - PUUT20

Energy Technology Data Exchange (ETDEWEB)

Ranta, T.; Halonen, P.; Frilander, P. [VTT Processes, Jyvaeskylae (Finland); Asikainen, A. [Finnish Forest Research Centre, Joensuu (Finland); Lehikoinen, M.; Vaeaetaeinen, K. [Joensuu Univ. (Finland)

2002-07-01

The objective of the project was to develop the long-distance transportation of forest chips by means of better transport economy and control of logistics activities. Different loading methods were tested to make the load sufficiently compact and to intensify the use of load space of the chip trucks. The usability of mobile positioning devices was tested in the operational environment of forest chips procurement. The arrivals and inbound logistics activities of power plant were modeled by aid of simulation model to estimate the queuing time of chip trucks with alternative course of action. According to the follow-up study of chip trucks and simulation of receiving activities substantial developing potential was found to decrease the terminal 1.19 times of trucks both in loading stage at forest terminal and unloading stage at power plant receiving area. By trucks with interchangeable containers terminal times can be decreased by developing the logistics of production chain for example by means of the pilot production control system evaluated in the project or by dimensioning the capacity of whole chain to match better for prevailing operational environment. With shorter distances the number of containers or the trailer size can be designed for smaller volume whereas with longer distances the transport economy will be emphasized. The capacity of weight limited the load size except for summer period alongside with dry forest chips. Instead of maximize the load volume, more essential will be to decrease the unloaded weight and effectiveness of loading and unloading stage. Loading method, where belt conveyor was equipped with mechanical ejector, compressed the load some 15% compared with blowing device. The energy consumption was also essentially lower. The pilot-period of production control system showed that the mobile positioning devices and digital maps will improve the planning and control activities of forest chip production. When the procurement amounts of forest

A General Probability Formula of the Number of Location Areas' Boundaries Crossed by a Mobile Between Two Successive Call Arrivals

Institute of Scientific and Technical Information of China (English)

Yi-Hua Zhu; Ding-Hua Shi; Yong Xiong; Ji Gao; He-Zhi Luo

2004-01-01

Mobility management is a challenging topic in mobile computing environment. Studying the situation of mobiles crossing the boundaries of location areas is significant for evaluating the costs and performances of various location management strategies. Hitherto, several formulae were derived to describe the probability of the number of location areas' boundaries crossed by a mobile. Some of them were widely used in analyzing the costs and performances of mobility management strategies. Utilizing the density evolution method of vector Markov processes, we propose a general probability formula of the number of location areas' boundaries crossed by a mobile between two successive calls. Fortunately, several widely-used formulae are special cases of the proposed formula.

Commercial truck parking and other safety issues.

Science.gov (United States)

2015-10-01

Commercial truck parking is a safety issue, since trucks are involved in approximately 10% of all fatal accidents on interstates and : parkways in Kentucky. Drivers experience schedule demands and long hours on the road, yet they cannot easily determ...

Papers on vehicle size : cars and trucks

Science.gov (United States)

1988-06-01

The four papers in this volume describe analyses of car size : trends and truck occupant injuries and fatalities. All four were : written between June 1985 and December 1987. The topics : addressed include where heavy truck accidents occur, injury an...

Investigating the structure of a vortex flow in the closed polygonal containers

Science.gov (United States)

Podolskaya, I. Yu; Bakakin, G. V.; Naumov, I. V.

2018-03-01

The structure of confined vortex flow generated by a rotating lid in a closed container with polygonal cross-section geometry (eight, six and five angles) has been investigated numerically for different height/radius aspect ratios h from 3.0 to 4.5 and for Reynold numbers ranging from 1500 to 3000. The critical Reynolds numbers at which the flow becomes unsteady were determined numerically by STAR-CCM+ computational fluid dynamics software for pentagonal and hexagonal cross-section configurations. The obtained results were compared with the flow structure in the closed cylindrical container. The boundary of a nonstationarity in polygonal containers is found to shift to the region of smaller aspect ratio and smaller Reynolds numbers with a decrease in the number of angles in the cross-section of the container relative to the boundary in a cylindrical container. It is additionally established that the structure of the flow in the near-axis region remains similar to the vortex structure in the cylinder, therefore the shape of the container does not influence the near-axis region.

Trucks involved in fatal accidents codebook 2008.

Science.gov (United States)

2011-01-01

This report provides documentation for UMTRIs file of Trucks Involved in Fatal Accidents : (TIFA), 2008, including distributions of the code values for each variable in the file. The 2008 : TIFA file is a census of all medium and heavy trucks invo...

Self-Contained Cross-Cutting Pipeline Software Architecture

OpenAIRE

Patwardhan, Amol; Patwardhan, Rahul; Vartak, Sumalini

2016-01-01

Layered software architecture contains several intra-layer and inter-layer dependencies. Each layer depends on shared components making it difficult to release a code change, bug fix or feature without exhaustive testing and having to build the entire software code base. This paper proposed self-contained, cross-cutting pipeline architecture (SCPA) that is independent of existing layers. We chose 2 open source projects and 3 internal intern projects that used n-tier architecture and applied t...

Intralog Towards an autonomous system for handling inter-terminal container transport

NARCIS (Netherlands)

Spruijt, Adrie; van Duin, Ron; Rieck, Frank

2017-01-01

As part of the National Transition Board Practice Research Raak/SIA program, the INTRALOG (intelligent Truck Application in Logistics) project investigated the practical application of zero emission Automatic Guided Trucks (AGTs) for the transport of containers in the Harbour Industrial Cluster

Luggage truck

NARCIS (Netherlands)

Oosterhuis, E.J.; Luttekes, E.; Rijsenbrij, J.C.

2004-01-01

The present invention relates to a luggage truck (2) comprising a loading space for luggage and provided with a conveyor belt (14) disposed in the loading space for the supply and removal of luggage, which conveyor belt is at the same time a storage unit for the luggage, wherein the conveyor belts

What to Share and Why to Share? A Case Study of CrossBoundary Information Sharing in Taiwan e-Government

Directory of Open Access Journals (Sweden)

Tung-Mou Yang

2013-06-01

Full Text Available In the public sector, cross-boundary information sharing has been an important theme among governmental collaboration and is critical to organizational efficiency and performance. This research explores the types and characteristics of shared information and the intended purposes of information sharing. In the case study, the cross-boundary shared information can be abstracted into five fundamental types: the collected raw data, the value-added information, the administration oriented information, the administration-oriented knowledge, and the domain-oriented knowledge. Another framework is proposed to conceptualize the purposes of interagency information sharing. The identified seven purposes are administrative work, information search and verification, information aggregation, business process chain, innovative service, experience-based knowledge sharing, and crisis and emergency. The seven purposes do not mean to be an exhaustive list but to provide an initial conceptualization to perceive the functionalities and roles that cross-boundary information sharing plays among government agencies. The two proposed frameworks can help both researchers and practitioners perceive and clarify the fundamental part of cross-boundary information sharing in the public sector. The finding of this research is also expected to enrich the current information-sharing theories and to contribute to the current e-Government literature from an international perspective.

Truck drivers as stakeholders in cooperative driving

NARCIS (Netherlands)

de Bruijn, F.; Terken, J.M.B.; Aarts, E.; de Ruyter, B.; Markopoulos, P.; van Loenen, E.; Wichert, R.; Schouten, B.; Terken, J.M.B.; van Kranenburg, R.; Den Ouden, E.; O'Hare, G.

2014-01-01

Cooperative driving for trucks has been claimed to bring substantial benefits for society and fleet owners because of better throughput and reduced fuel consumption, but benefits for truck drivers are questionable. While most work on cooperative driving focuses on the technology, the current paper

Optimising Shovel-Truck Fuel Consumption using Stochastic ...

African Journals Online (AJOL)

Michael

2017-12-02

Dec 2, 2017 ... J. Bansah. 1University of Mines and Technology, P. O. Box 237, Tarkwa, Ghana. 2Missouri S&T .... of dump trucks which could be mixed fleets or same fleets. .... another portraying the reality of trucks moving from a shovel to a ...

Coordinating decentralized optimization of truck and shovel mining operations

Energy Technology Data Exchange (ETDEWEB)

Cheng, R.; Fraser Forbes, J. [Alberta Univ., Edmonton, AB (Canada). Dept. of Chemical and Materials Engineering; San Yip, W. [Suncor Energy, Fort McMurray, AB (Canada)

2006-07-01

Canada's oil sands contain the largest known reserve of oil in the world. Oil sands mining uses 3 functional processes, ore hauling, overburden removal and mechanical maintenance. The industry relies mainly on truck-and-shovel technology in its open-pit mining operations which contributes greatly to the overall mining operation cost. Coordination between operating units is crucial for achieving an enterprise-wide optimal operation level. Some of the challenges facing the industry include multiple or conflicting objectives such as minimizing the use of raw materials and energy while maximizing production. The large sets of constraints that define the feasible domain pose as challenge, as does the uncertainty in system parameters. One solution lies in assigning truck resources to various activities. This fully decentralized approach would treat the optimization of ore production, waste removal and equipment maintenance independently. It was emphasized that mine-wide optimal operation can only be achieved by coordinating ore hauling and overburden removal processes. For that reason, this presentation proposed a coordination approach for a decentralized optimization system. The approach is based on the Dantzig-Wolfe decomposition and auction-based methods that have been previously used to decompose large-scale optimization problems. The treatment of discrete variables and coordinator design was described and the method was illustrated with a simple truck and shovel mining simulation study. The approach can be applied to a wide range of applications such as coordinating decentralized optimal control systems and scheduling. 16 refs., 3 tabs., 2 figs.

Optimising Shovel-Truck Fuel Consumption using Stochastic ...

African Journals Online (AJOL)

Optimising the fuel consumption and truck waiting time can result in significant fuel savings. The paper demonstrates that stochastic simulation is an effective tool for optimising the utilisation of fossil-based fuels in mining and related industries. Keywords: Stochastic, Simulation Modelling, Mining, Optimisation, Shovel-Truck ...

Slow speed object detection for haul trucks

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-09-15

Caterpillar integrates radar technology with its current camera based system. Caterpillar has developed the Integrated Object Detection System, a slow speed object detection system for mining haul trucks. Object detection is a system that aids the truck operator's awareness of their surroundings. The system consists of a color touch screen display along with medium- and short-range radar as well as cameras, harnesses and mounting hardware. It is integrated into the truck's Work Area Vision System (WAVS). After field testing in 2007, system commercialization began in 2008. Prototype systems are in operation in Australia, Utah and Arizona and the Integrated Object Detection System will be available in the fourth quarter of 2009 and on production trucks 785C, 789C, 793D and 797B. The article is adapted from a presentation by Mark Richards of Caterpillar to the Haulage & Loading 2009 conference, May, held in Phoenix, AZ. 1 fig., 5 photos.

Improving truck safety: Potential of weigh-in-motion technology

Directory of Open Access Journals (Sweden)

Bernard Jacob

2010-07-01

Full Text Available Trucks exceeding the legal mass limits increase the risk of traffic accidents and damage to the infrastructure. They also result in unfair competition between transport modes and companies. It is therefore important to ensure truck compliance to weight regulation. New technologies are being developed for more efficient overload screening and enforcement. Weigh-in-Motion (WIM technologies allow trucks to be weighed in the traffic flow, without any disruption to operations. Much progress has been made recently to improve and implement WIM systems, which can contribute to safer and more efficient operation of trucks.

Conformity checking of LPG Transportation Trucks by Modelling and Simulation

Directory of Open Access Journals (Sweden)

Gallab Maryam

2017-01-01

Full Text Available LPG Loading /unloading site is considered as a dangerous environment of significant risk, especially during LPG transfer operations. These risks may cause catastrophic dangers such as BLEVE (Boiling Liquid Expanding Vapour Explosion, UVCE (Unconfined Vapour Cloud Explosion, etc. The site consists of a tank (RST containing LPG and threetransfer posts. Two posts allow loading of small carrier tankers 6 tons. The other one transfer post transfer LPG contained injumbo tankers 20 tons inside the tank. The industrial site at risks chooses to demonstrate the need for a modelling-simulation approach. The aim is to check first compliance and authorization of the truck when it enters the site for loading /unloading, to verify the authorization to make the transfer, and then, to identify the driver and his training to ensure that the transfer operations are going to take place without incident. Sometimes, it may happen that Consignment Operator (CO is busy orabsent and thus the driver operates alone without being authorized, in this case the site risks a loss of control due to a lack of resources. The modelling-simulation will be done using multi-agent systems that will present the drivers, trucks, PO and loading unloading posts as agents in order to have a model facilitating this checking.

Prevalence of drugs in oral fluid from truck drivers in Brazilian highways.

Science.gov (United States)

Bombana, Henrique Silva; Gjerde, Hallvard; Dos Santos, Marcelo Filonzi; Jamt, Ragnhild Elén Gjulem; Yonamine, Mauricio; Rohlfs, Waldo José Caram; Muñoz, Daniel Romero; Leyton, Vilma

2017-04-01

Traffic accidents are responsible for 1.25 million deaths worldwide and are the most common cause of death among those aged 15-29 years. In Brazil, traffic accidents caused more than 44,000 deaths in 2014. The use of psychoactive drugs is an important risk factor for being involved in traffic accidents. Previous studies have found that psychoactive substances are commonly used by truck drivers in Brazil to maintain their extensive work schedule and stay awake while driving during nighttime hours. The state of Sao Paulo is one of the most important states regarding goods transportation. Important highways cross through Sao Paulo to other regions from Brazil and to other countries in Latin America. This study aims to determine the prevalence of illicit drug use by truck drivers in the state of Sao Paulo through toxicological analyses of oral fluid. Truck drivers were randomly stopped by police officers on federal roads during morning hours. Oral fluid samples were collected using the Quantisal™ device. In addition, a questionnaire concerning sociodemographic characteristics and health information was administered. Oral fluid samples were screened for amphetamine, cocaine, and tetrahydrocannabinol (Δ9-THC) by ELISA and the confirmation was performed using ultra performance liquid chromatography with tandem mass spectrometry detection (UPLC-MS/MS). Of the 764 drivers stopped, 762 agreed to participate. The participants were driving an average of 614km and 9.4h a day. Of the total samples, 5.2% (n=40) tested positive for drugs. Cocaine was the most frequently found drug (n=21), followed by amphetamine (n=16) and Δ9-THC (n=8). All drivers were men with an average age of 42.5 years. With these results we were able to verify that many truck drivers were still consuming psychoactive drugs while driving, and cocaine was the most prevalent one. This reinforces the need for preventive measures aimed at controlling the use of illicit drugs by truck drivers in Brazil

Factors Affecting Accidents Risks among Truck Drivers In Egypt

Directory of Open Access Journals (Sweden)

Elshamly Ahmed Fathalla

2017-01-01

Full Text Available Egypt is ranked among the countries with the highest rates of road accidents. According to the American Chamber of Commerce more than 96% of Egypt's goods are transported by trucks and due to their large volume and excessive weight, the severity and number of truck accident fatalities are much higher than other vehicles in Egypt. The present study aims at identifying truck driver's behavior and its influence on crash involvement. Due to the shortage in recording accident data and the inaccurate road accident audit, data was collected from several governorates in Egypt through questionnaire. Questionnaire forms were filled out through personal interviews with truck drivers. The total number of respondents was 643. The final analysis was made on the 615 questionnaires with complete answers. The data was analyzed and logistic regression was applied to accident related data to examine the contributing factors affecting accident occurrence of truck drivers. Results showed that fatigue in terms of driving hours (continuous and total and lack of sleep, drug use during driving, and driver obesity are the most influencing factors on the occurrence of truck accidents in Egypt. The findings of this research highlight the important role human factors have on the risk of crash involvement amongst Egypt's truck drivers and the need to improve their work conditions.

Crossing Boundaries in Global Software Development

DEFF Research Database (Denmark)

Søderberg, Anne-Marie; Romani, Laurence

across cultures, languages, organizational boundaries, time zones and geographical distances. The paper revises a framework of boundary spanning leadership practices developed for MNCs and adapts it to an offshore outsourcing context. It also contributes with reflections on how imbalances of resources......Western companies´ offshore outsourcing is increasingly being replaced by strategic partnerships that require closer collaboration between client and vendor. This paper addresses the question: How does a vendor company from an emergent market deal with inter-organizational boundary spanning...

Particulate matters from diesel heavy duty trucks exhaust versus cigarettes emissions: a new educational antismoking instrument.

Science.gov (United States)

De Marco, Cinzia; Ruprecht, Ario Alberto; Pozzi, Paolo; Munarini, Elena; Ogliari, Anna Chiara; Mazza, Roberto; Boffi, Roberto

2015-01-01

Indoor smoking in public places and workplaces is forbidden in Italy since 2003, but some health concerns are arising from outdoor secondhand smoke (SHS) exposure for non-smokers. One of the biggest Italian Steel Manufacturer, with several factories in Italy and abroad, the Marcegaglia Group, recently introduced the outdoor smoking ban within the perimeter of all their factories. In order to encourage their smoker employees to quit, the Marcegaglia management decided to set up an educational framework by measuring the PM1, PM2.5 and PM10 emissions from heavy duty trucks and to compare them with the emissions of cigarettes in an indoor controlled environment under the same conditions. The exhaust pipe of two trucks powered by a diesel engine of about 13.000/14.000 cc(3) were connected with a flexible hose to a hole in the window of a container of 36 m(3) volume used as field office. The trucks operated idling for 8 min and then, after adequate office ventilation, a smoker smoked a cigarette. Particulate matter emission was thereafter analyzed. Cigarette pollution was much higher than the heavy duty truck one. Mean of the two tests was: PM1 truck 125.0(47.0), cigarettes 231.7(90.9) p = 0.002; PM2.5 truck 250.8(98.7), cigarettes 591.8(306.1) p = 0.006; PM10 truck 255.8(52.4), cigarettes 624.0(321.6) p = 0.002. Our findings may be important for policies that aim reducing outdoor SHS exposure. They may also help smokers to quit tobacco dependence by giving them an educational perspective that rebuts the common alibi that traffic pollution is more dangerous than cigarettes pollution.

Projection of light-truck population to year 2025

Energy Technology Data Exchange (ETDEWEB)

1978-10-01

The recent growth in the number of light trucks is a matter of considerable interest in that it may have far-reaching implications for gasoline consumption. This paper forecasts the number of light trucks in the years to 2025. The forecast is based on economic scenarios developed by SRI International. Except for the case of the most-dismal economic forecast, the number of light trucks is predicted to increase monotonically and to show the greatest rate of increase between 1973 and 1980.

Psychoactive substance use by truck drivers: a systematic review.

Science.gov (United States)

Girotto, Edmarlon; Mesas, Arthur Eumann; de Andrade, Selma Maffei; Birolim, Marcela Maria

2014-01-01

The aim of this study was to summarise the scientific evidence on the prevalence of psychoactive substance use and on the factors associated with their intake among truck drivers. A systematic review was performed in the databases PubMed, Scientific Electronic Library Online, Latin American and Caribbean Health Sciences, and Cochrane and 36 cross-sectional studies were identified with quantitative results about the use of psychoactive substances by truck drivers. Out of these, 28 were carried out in countries with large land areas and 23 obtained their information through self-reporting. The most frequently studied substances were alcohol (n=25), amphetamines (n=17), marijuana (n=16) and cocaine (n=13). The prevalence of the use of these substances greatly varied: alcohol (0.1-91.0%); amphetamines (0.2-82.5%), marijuana (0.2-29.9%), cocaine (0.1-8.3%). The frequency of substance use was lower in studies that investigated the presence of these substances in biological samples than in those based on self-reported use. In 12 studies that evaluated factors associated with the intake of psychoactive substances, the following stood out: younger age, higher income, longer trips, alcohol consumption, driving in the night shift, travelling interstate routes, long or short sleep, fewer hours of rest, little experience of the driver, connection with small and medium sized companies, income below levels determined by labour agreements, productivity-based earnings and prior involvement in accidents. The frequency of psychoactive substance use by truck drivers seems to be high, although that greatly varies according to the type of substance and the method of collecting the information. The use of these substances was mainly associated with indicators of poor working conditions.

Real-time pedestrian detection in a Truck's blind spot camera

OpenAIRE

Van Beeck, Kristof; Goedemé, Toon

2014-01-01

In this paper we present a multi-pedestrian detection and tracking framework targeting a specific application: detecting vulnerable road users in a truck's blind spot zone. Research indicates that existing non-vision based safety solutions are not able to handle this problem completely. Therefore we aim to develop an active safety system which warns the truck driver if pedestrians are present in the truck's blind spot zone. Our system solely uses the vision input from the truck's blind spot c...

Educating students to cross boundaries between disciplines and cultures and between theory and practice

NARCIS (Netherlands)

Fortuin, K.P.J.; Bush, S.R.

2010-01-01

Abstract: Purpose – The purpose of this paper is to evaluate and analyse the didactic model of a university course, which concerns an applied academic consultancy project and which focuses on skills related to crossing boundaries between disciplines and cultures, and between theory and practice.

Adaptive Virtual Tow Bar and Transition of Control : A truck driving simulator study

NARCIS (Netherlands)

Wilschut, E.S.; Willemsen, D.M.C.; Hogema, J.H.; Martens, M.H.

2016-01-01

Background : Truck platooning, with trucks being virtually connected, is getting more and more attention. Truck platooning offers the potential for substantial fuel savings while allowing the truck driver in the platoon to take a rest. However, at the current state of technology, truck drivers are

Assessment of Mechanisms Impacting N-Nitrosodimethylamine Fate Within the North Boundary Containment System, Rocky Mountain Arsenal

National Research Council Canada - National Science Library

Gunnison, Douglas

1997-01-01

.... Chemical analyses by both RMA and Shell Chemical have detected N-nitrosodimethylamine (NDMA), also known as dimethylnitrosamine, within the groundwater around the North Boundary Containment System...

Development of Diesel Engine Operated Forklift Truck for Explosive Gas Atmospheres

Science.gov (United States)

Vishwakarma, Rajendra Kumar; Singh, Arvind Kumar; Ahirwal, Bhagirath; Sinha, Amalendu

2018-02-01

For the present study, a prototype diesel engine operated Forklift truck of 2 t capacity is developed for explosive gas atmosphere. The parts of the Forklift truck are assessed against risk of ignition of the explosive gases, vapors or mist grouped in Gr. IIA and having ignition temperature more than 200°C. Identification of possible sources of ignition and their control or prevention is the main objective of this work. The design transformation of a standard Forklift truck into a special Forklift truck is made on prototype basis. The safety parameters of the improved Forklift truck are discussed in this paper. The specially designed Forklift truck is useful in industries where explosive atmospheres may present during normal working conditions and risk of explosion is a concern during handling or transportation of materials. This indigenous diesel engine based Forklift truck for explosive gas atmosphere classified as Zone 1 and Zone 2 area and gas group IIA is developed first time in India in association with the Industry.

Aberrant Behaviors and Road Accidents among Iranian Truck Drivers, 2010

Directory of Open Access Journals (Sweden)

Amir Houshang Mehrparvar

2011-12-01

Full Text Available structural dimensions of which as well as technologic failures such as road quality, and tech-nical faults of automobiles, need to be assessed in detail. Iran has the first order in the world for deadly road accidents. This study was designed to assess the association between aberrant behaviors of truck drivers and the incidence of road accidents in Yazd, center of Iran, in 2010.Methods: This cross-sectional descriptive-analytic study was conducted on 300 truck drivers in Yazd. We used 3 questionnaires, including one for demographic data, Driver Behavior Questionnaire (DBQ, and one for drivers' self-evaluation of the of their driving.Results: Five types of the behavior had the highest frequency: Misjudge speed of oncoming vehicle when overtaking.; Deliberately disregard the speed limits late at night or very early in the morning.; Ignore 'give way' signs, and narrowly avoid colliding with traffic having right of way.; Stuck behind a slow-moving vehicle on a two-lane highway, you are driven by frustration to try to overtake in risky circumstances.; Drive with only 'half-an-eye' on the road while looking at a map, changing a cassette or radio channel, etc. The more the driver's driv-ing was influenced by emotional and mental states the more deliberate violations and slips.Conclusion: Among truck drivers, safety has not developed sufficiently, and because of the dangers of road accidents both for the drivers and other people and its economic losses, the importance of the presenting some solutions is completely obvious.

Demonstration of fleet trucks fueled with PV hydrogen

International Nuclear Information System (INIS)

Provenzano, J.; Scott, P.B.; Zweig, R.

1998-01-01

The Clean Air Now (CAN) Solar Hydrogen Project has been installed at the Xerox Corporation, El Segundo, California site. Three Ford Ranger trucks have been converted to use hydrogen fuel. The ''stand- alone'' electrolyzer and hydrogen dispensing system is powered by a photovoltaic array with no connection to the power grid. A variable frequency DC/AC converter steps up the voltage to drive the 15 hp motor for the hydrogen compressor. Up to 400 standard cubic meters (SCM) of solar hydrogen is stored, and storage of up to 2300 SCM of commercial hydrogen is collocated. As the hydrogen storage is within 5km of Los Angeles International Airport, pilot operation of a hydrogen fuel cell bus for airport shuttle service has been demonstrated with fueling at the CAN facility. The truck engine conversions are bored to 2.91 displacement, use a Roots type supercharger and CVI (constant volume injection) fuel induction to allow performance similar to that of the gasoline powered truck. Truck fuel storage is done with carbon composite tanks at pressures up to 24.8 MPa (3600 psi). Two tanks are located just behind the driver's cab, and take up nearly half of the truck bed space. The truck highway range is approximately 140 miles. The engine operates in lean burn mode, with nil emissions of CO and HC. NO x emissions vary with load and rpm in the range from 10 to 100 ppm, yielding total emissions at a small fraction of the ULEV standard. Two Xerox fleet trucks have been converted, and one for the City of West Hollywood. The Clean Air Now Program demonstrates that hydrogen powered fleet development is an appropriate safe, and effective strategy for improvement of urban air quality. It further demonstrates that continued technological development and cost reduction will make such implementation competitive. (Author)

Study of cross-spectra of velocity components and temperature series in a nocturnal boundary layer

Science.gov (United States)

Maqueda, Gregorio; Sastre, Mariano; Viñas, Carmen; Viana, Samuel; Yagüe, Carlos

2010-05-01

The main characteristic of the Planetary Boundary Layer is the turbulent flow that can be understood as the motions of many superimposed eddies with different scales, which are very irregular and produce mixing among the atmospheric properties. Spectral analysis is a widely used statistical tool to know the size of eddies into the flow. The Turbulent Kinetic Energy is split in fractions for each scale of eddy by mean the power spectrum of the wind velocity components. Also, the fluctuation of the other variables as temperature, humidity, gases concentrations or material particles presents in the atmosphere can be divided according to the importance of different scales in a similar way than the wind. A Cross-spectrum between two time series is used in meteorology to know their correlation in frequency space. Specially, coespectrum, or real part of cross-spectrum, amplitud and coherence give us many information about the low or high correlation between two variables in a particular frecuency or scale (Stull, 1988). In this work we have investigated cross-spectra of velocity components and temperature measured along the summer 2009 at the CIBA, Research Centre for the Lower Atmosphere, located in Valladolid province (Spain), which is on a quite flat terrain (Cuxart et al., 2000; Viana et al., 2009). In these experimental dataset, among other instrumentation, two sonic anemometers (20 Hz, sampling rate) at 1.5 m and 10 m height are available. Cross-spectra between variables of the two levels, specially, wind vertical component and sonic temperature, under stable stratification are studied in order to improve the knowledge of the proprieties of the momentum and heat fluxes near the ground in the PBL. Nevertheless, power spectral of horizontal components of the wind, at both levels, have been also analysed. The spectra and cross-spectra were performed by mean the Blackman-Tukey method, widely utilised in the time series studies (Blackman & Tukey, 1958) and, where it is

Risk behaviour, sexually transmitted infections and HIV among long-distance truck drivers: a cross-sectional survey along national highways in India.

Science.gov (United States)

Pandey, Arvind; Benara, Sudhir Kumar; Roy, Nandini; Sahu, Damodar; Thomas, Mariamma; Joshi, Dhirendra Kumar; Sengupta, Utpal; Paranjape, Ramesh S; Bhalla, Aparajita; Prakash, Ajay

2008-12-01

To report HIV and sexually transmitted infection (STI) prevalence and sexual behaviour of long-distance truckers on four national highway routes from a large, cross-sectional, national-level trucker survey in India. Seven trans-shipment locations covering the bulk of India's transport volume along four routes, north-west (NW), north-south (NS), north-east (NE) and south-east (SE) were identified as survey sites. A total of 2066 long-distance truckers were selected using a two-stage, time-location cluster sampling approach and, after consent, interviewed about their sexual behaviour. Urine and blood sample were tested for selected STIs. Overall, HIV prevalence among truckers was found to be 4.6%, with prevalence highest on the SE route (6.8%) and lowest on the NS (2.4%). Positive HSV-2 serology, which was tested in a 10% subsample, was low along three routes, 10.0%, 12.8% and 6.7% for the NE, NS and NW, respectively, but 38.7% in the SE. The truckers from the SE were found to be more likely to have sex with paid partners than the NE route. Moreover, truckers who owned their trucks were more likely than those who did not use condoms consistently with paid partners, and truckers who drive trucks owned by their relatives/friends are more likely than others to have any STI. Low self-risk perception for HIV (9.9%), low consistent condom use with non-paid partners (18.6%) and wives (3%), low reported exposure to any interventions (25.6%) and low levels of ever having taken an HIV test (16.5%) make truckers an important bridge population requiring strengthened interventions.

Adaptation of topology optimization on truck-structure; Kinshitsukaho ni yoru iso saitekika shuho no truck kozo eno tekiyo

Energy Technology Data Exchange (ETDEWEB)

Tachibana, H; Kojima, A; Chiba, S [Mitsubishi Motors Corp., Tokyo (Japan)

1997-10-01

An optimization using the homogenization method has been applied to a truck-structure on the concept design stage. A truck-structure is grouped into 3 classes (thin plate structure , thick plate structure and solid structure), then example, effectiveness and method for the application for the purpose of weight reduction , high rigidity and high eigen-frequency are introduced. 3 refs., 24 figs., 1 tab.

CUSTOMER'S PERCEPTION TOWARDS FOOD TRUCK PRODUCTS IN INDIA

OpenAIRE

Dr. Ramakrishna Bandaru*, Prof. H. Venkateshwarlu

2017-01-01

Food Truck business is a very famous and a growing business in today’s time. Over the decade, every country in the world has been following the trend of the mobile food business. The silent feature of the food truck business is ‘customer reach and satisfaction’. Along with the increase in people living standards, ‘food on wheel’ business made a popular. According to IBIS World report, the food truck industry in the world has grown an average of 9.3% per year over the last five years. Slowly,...

Cross-sectional scanning tunneling microscopy of antiphase boundaries in epitaxially grown GaP layers on Si(001)

Energy Technology Data Exchange (ETDEWEB)

Prohl, Christopher; Lenz, Andrea, E-mail: alenz@physik.tu-berlin.de [Technische Universität Berlin, Institut für Festkörperphysik, 10623 Berlin (Germany); Döscher, Henning; Kleinschmidt, Peter; Hannappel, Thomas [Helmholtz Center Berlin for Materials and Energy, 14109 Berlin (Germany)

2016-05-15

In a fundamental cross-sectional scanning tunneling microscopy investigation on epitaxially grown GaP layers on a Si(001) substrate, differently oriented antiphase boundaries are studied. They can be identified by a specific contrast and by surface step edges starting/ending at the position of an antiphase boundary. Moreover, a change in the atomic position of P and Ga atoms along the direction of growth is observed in agreement with the structure model of antiphase boundaries in the GaP lattice. This investigation opens the perspective to reveal the orientation and position of the antiphase boundaries at the atomic scale due to the excellent surface sensitivity of this method.

Experimental Measurement of the Flow Field of Heavy Trucks

Energy Technology Data Exchange (ETDEWEB)

Fred Browand; Charles Radovich

2005-05-31

Flat flaps that enclose the trailer base on the sides and top are known to reduce truck drag and reduce fuel consumption. Such flapped-truck geometries have been studied in laboratory wind tunnels and in field tests. A recent review of wind tunnel data for a variety of truck geometries and flow Reynolds numbers show roughly similar values of peak drag reduction, but differ in the determination of the optimum flap angle. Optimum angles lie in the range 12 degrees-20 degrees, and may be sensitive to Reynolds number and truck geometry. The present field test is undertaken to provide additional estimates of the magnitude of the savings to be expected on a typical truck for five flap angles 10, 13, 16, 19, and 22 degrees. The flaps are constructed from a fiberglass-epoxy-matrix material and are one-quarter of the base width in length (about 61 cm, or 2 feet). They are attached along the rear door hinge lines on either side of the trailer, so that no gap appears at the joint between the flap and the side of the trailer The flap angle is adjusted by means of two aluminum supports. The present test is performed on the NASA Crows Landing Flight Facility at the northern end of the San Joaquin valley in California. The main runway is approximately 2400 meters in length, and is aligned approximately in a north-south direction The test procedure is to make a series of runs starting at either end of the runway. All runs are initiated under computer control to accelerate the truck to a target speed of 60 mph (96 6 km/hr), to proceed at the target speed for a fixed distance, and to decelerate at the far end of the runway. During a run, the broadcast fuel rate, the engine rpm, forward speed, elapsed time--as well as several other parameters (10 in all)--are digitized at a rate of 100 digitizations per second. Various flapped-conditions are interspersed with the ''no flaps'' control, and are sequenced in a different order on different days. Approximately 310 runs

Cross-boundary management between national parks and surrounding lands: A review and discussion

Science.gov (United States)

Schonewald-Cox, Christine; Buechner, Marybeth; Sauvajot, Raymond; Wilcox, Bruce A.

1992-03-01

Protecting biodiversity on public lands is difficult, requiring the management of a complex array of factors. This is especially true when the ecosystems in question are affected by, or extend onto, lands outside the boundaries of the protected area. In this article we review recent developments in the cross-boundary management of protected natural resources, such as parks, wildlife reserves, and designated wilderness areas. Five ecological and 11 anthropic techniques have been suggested for use in cross-boundary management. The categories are not mutually exclusive, but each is a distinct and representative approach, suggested by various authors from academic, managerial, and legal professions. The ecological strategies stress the collection of basic data and documentation of trends. The anthropic techniques stress the usefulness of cooperative guidelines and the need to develop a local constituency which supports park goals. However, the situation is complex and the needed strategies are often difficult to implement. Diverse park resources are influenced by events in surrounding lands. The complexity and variability of sources, the ecological systems under protection, and the uncertainty of the effects combine to produce situations for which there are no simple answers. The solution to coexistence of the park and surrounding land depends upon creative techniques and recommendations, many still forthcoming. Ecological, sociological, legal, and economic disciplines as well as the managing agency should all contribute to these recommendations. Platforms for change include legislation, institutional policies, communication, education, management techniques, and ethics.

Stowing of packages containing radioactive materials on conveyances

International Nuclear Information System (INIS)

Draulans, J.; Lafontaine, I.; Chevalier, G.; Gilles, P.; Jolys, J.C.; Pouard, M.

1986-04-01

The Commission of the European Communities has financed some research work carried out jointly by the ''Commissariat a l'Energie Atomique'' and the belgian company ''TRANSNUBEL'', in the field of stowing containers for radioactive materials on trucks. 2 reference type accidents are selected: . a front-end collision against a rigid barrier at an impact speed of 50 km/h . a side-on collision of an impacting vehicle at a speed of 25-35 km/h against a truck loaded with a container. A mathematical model has been developed by means of the CEA Trico code to compute a frontal impact in which the container (1.3 t weight), is stowed by means of 4 tie-down members, each for a nominal load of 2 t. Results indicate the stowing being insufficient and the attachment points too weak to keep the container on the platform. Real tests have been performed to verify these results. Tie-down members and chocks have been defined on the basis of static- and dynamic tests for being used in 8 crash tests. Different containers (low- and high center of gravity) and different ways of stowing have been tried out. An attempt is made to work a code of good practice for stowing, by means of tie-down members and chocks, packages on a truck platform. 19 refs

Analysis of major trends in U.S. commercial trucking, 1977-2002.

Energy Technology Data Exchange (ETDEWEB)

Bertram, K. M.; Santini, D .J.; Vyas, A. D.

2009-06-10

This report focuses on various major long-range (1977-2002) and intermediate-range (1982-2002) U.S. commercial trucking trends. The primary sources of data for this period were the U.S. Bureau of the Census Vehicle Inventory and Use Survey and Truck Inventory and Use Survey. In addition, selected 1977-2002 data from the U.S. Department of Energy/Energy Information Administration and from the U.S. Department of Transportation/Federal Highway Administration's Highway Statistics were used. The report analyzes (1) overall gasoline and diesel fuel consumption patterns by passenger vehicles and trucks and (2) the population changes and fuels used by all commercial truck classes by selected truck type (single unit or combination), during specified time periods, with cargo-hauling commercial trucks given special emphasis. It also assesses trends in selected vehicle miles traveled, gallons per vehicle miles traveled, and gallons per cargo ton-mile traveled, as well as the effect of cargo tons per truck on fuel consumption. In addition, the report examines long-range trends for related factors (e.g., long-haul mileages driven by heavy trucks) and their impacts on reducing fuel consumption per cargo-ton-mile and the relative shares of total commercial fuel use among truck classes. It identifies the effects of these trends on U.S. petroleum consumption. The report also discusses basic engineering design and performance, national legislation on interstate highway construction, national demographic trends (e.g., suburbanization), and changes in U.S. corporate operations requirements, and it highlights their impacts on both the long-distance hauling and shorter-distance urban and suburban delivery markets of the commercial trucking industry.

Igloo containment system for improvised explosive devices

International Nuclear Information System (INIS)

Dyckes, G.W.

1980-09-01

A method for containing or partially containing the blast and dispersal of radioactive particulate from improvised explosive devices is described. The containment system is restricted to devices located in fairly open areas at ground level, e.g., devices concealed in trucks, vans, transportainers, or small buildings which are accessible from all sides

Developing a cross-docking network design model under uncertain environment

Science.gov (United States)

Seyedhoseini, S. M.; Rashid, Reza; Teimoury, E.

2015-06-01

Cross-docking is a logistic concept, which plays an important role in supply chain management by decreasing inventory holding, order packing, transportation costs and delivery time. Paying attention to these concerns, and importance of the congestion in cross docks, we present a mixed-integer model to optimize the location and design of cross docks at the same time to minimize the total transportation and operating costs. The model combines queuing theory for design aspects, for that matter, we consider a network of cross docks and customers where two M/M/c queues have been represented to describe operations of indoor trucks and outdoor trucks in each cross dock. To prepare a perfect illustration for performance of the model, a real case also has been examined that indicated effectiveness of the proposed model.

Working conditions and illicit psychoactive substance use among truck drivers in Brazil.

Science.gov (United States)

Girotto, Edmarlon; de Andrade, Selma Maffei; Mesas, Arthur Eumann; González, Alberto Durán; Guidoni, Camilo Molino

2015-11-01

The aim of this study was to identify the role that working conditions play in predicting the consumption of illicit psychoactive substances (IPS) among truck drivers. This cross-sectional study was conducted with truck drivers who transport grains to Paranaguá Port, PR, Brazil. The truck drivers were interviewed, and they completed a self-administered questionnaire regarding their sociodemographics, lifestyles, working conditions, and consumption of IPS over the past 30 days. The statistical analysis included logistic regression models progressively adjusted for sociodemographic and lifestyle variables. A total of 670 male drivers with a mean age of 41.9 (±11.1) years were assessed. The prevalence of IPS consumption over the past 30 days was 10.9% (n=73). The drugs used primarily consisted of amphetamines (n=61). After adjusting for working characteristics, sociodemographic and lifestyle variables, the following working conditions were associated with the consumption of IPS: driving mostly at night (OR=3.91; 95% CI 1.75 to 8.74), driving while tired (OR=2.26; 95% CI 1.31 to 3.89), and earning a higher monthly income (OR=2.08; 95% CI 1.16 to 3.72). Drivers who were 39 years old or younger (OR=2.11; 95% CI 1.05 to 4.25) and not living with a partner (OR=2.22; 95% CI 1.17 to 4.22) were also more likely to consume IPS. Driving mostly at night, being tired, and earning more increase the use of IPS among truck drivers, regardless of other working characteristics, sociodemographic, and lifestyle variables. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Assessing crash risk considering vehicle interactions with trucks using point detector data.

Science.gov (United States)

Hyun, Kyung Kate; Jeong, Kyungsoo; Tok, Andre; Ritchie, Stephen G

2018-03-12

Trucks have distinct driving characteristics in general traffic streams such as lower speeds and limitations in acceleration and deceleration. As a consequence, vehicles keep longer headways or frequently change lane when they follow a truck, which is expected to increase crash risk. This study introduces several traffic measures at the individual vehicle level to capture vehicle interactions between trucks and non-trucks and analyzed how the measures affect crash risk under different traffic conditions. The traffic measures were developed using headways obtained from Inductive Loop Detectors (ILDs). In addition, a truck detection algorithm using a Gaussian Mixture (GM) model was developed to identify trucks and to estimate truck exposure from ILD data. Using the identified vehicle types from the GM model, vehicle interaction metrics were categorized into three groups based on the combination of leading and following vehicle types. The effects of the proposed traffic measures on crash risk were modeled in two different cases of prior- and non-crash using a case-control approach utilizing a conditional logistic regression. Results showed that the vehicle interactions between the leading and following vehicle types were highly associated with crash risk, and further showed different impacts on crash risk by traffic conditions. Specifically, crashes were more likely to occur when a truck following a non-truck had shorter average headway but greater headway variance in heavy traffic while a non-truck following a truck had greater headway variance in light traffic. This study obtained meaningful conclusions that vehicle interactions involved with trucks were significantly related to the crash likelihood rather than the measures that estimate average traffic condition such as total volume or average headway of the traffic stream. Copyright © 2018 Elsevier Ltd. All rights reserved.

High-frequency limit of the transport cross section in scattering by an obstacle with impedance boundary conditions

Energy Technology Data Exchange (ETDEWEB)

Aleksenko, A I; Cruz, J P; Lakshtanov, E L [Department of Mathematics, Aveiro University, Aveiro 3810 (Portugal)], E-mail: lakshtanov@rambler.ru

2008-06-27

The scalar scattering of a plane wave by a strictly convex obstacle with impedance boundary conditions is considered. A uniform bound of the total cross section for all values of the frequency is presented. The high-frequency limit of the transport cross section is calculated and presented as a classical functional of the variational calculus.

High-frequency limit of the transport cross section in scattering by an obstacle with impedance boundary conditions

International Nuclear Information System (INIS)

Aleksenko, A I; Cruz, J P; Lakshtanov, E L

2008-01-01

The scalar scattering of a plane wave by a strictly convex obstacle with impedance boundary conditions is considered. A uniform bound of the total cross section for all values of the frequency is presented. The high-frequency limit of the transport cross section is calculated and presented as a classical functional of the variational calculus

Electric urban delivery trucks: energy use, greenhouse gas emissions, and cost-effectiveness.

Science.gov (United States)

Lee, Dong-Yeon; Thomas, Valerie M; Brown, Marilyn A

2013-07-16

We compare electric and diesel urban delivery trucks in terms of life-cycle energy consumption, greenhouse gas (GHG) emissions, and total cost of ownership (TCO). The relative benefits of electric trucks depend heavily on vehicle efficiency associated with drive cycle, diesel fuel price, travel demand, electric drive battery replacement and price, electricity generation and transmission efficiency, electric truck recharging infrastructure, and purchase price. For a drive cycle with frequent stops and low average speed such as the New York City Cycle (NYCC), electric trucks emit 42-61% less GHGs and consume 32-54% less energy than diesel trucks, depending upon vehicle efficiency cases. Over an array of possible conditions, the median TCO of electric trucks is 22% less than that of diesel trucks on the NYCC. For a drive cycle with less frequent stops and high average speed such as the City-Suburban Heavy Vehicle Cycle (CSHVC), electric trucks emit 19-43% less GHGs and consume 5-34% less energy, but cost 1% more than diesel counterparts. Considering current and projected U.S. regional electricity generation mixes, for the baseline case, the energy use and GHG emissions ratios of electric to diesel trucks range from 48 to 82% and 25 to 89%, respectively.

Truck Drivers And Risk Of STDs Including HIV

Directory of Open Access Journals (Sweden)

Bansal R.K

1995-01-01

Full Text Available Research Question: Whether long distance truck drivers are at a higher risk of contracting and transmitting STDs including HIV? Objectives: i To study the degree of knowledge of HIV and AIDS among long- distance truck drivers. ii Assess their sexual behaviour including condom use. iii Explore their prevailing social influences and substance abuse patterns. iv Explore their treatment seeking bahaviour as regards STDs. v Deduce their risk of contracting and transmitting STDs including HIV. Study Design: Cross- sectional interview. Setting: Transport Nagar, Indore (M.P Participants: 210 senior drivers (First drivers and 210 junior drivers (Second drivers. Study Variables: Extra-Marital sexual intercourse, condom usage, past and present history of STDs, treatment and counseling, substance abuse, social â€" cultural milieu. Outcome Variables: Risk of contraction of STDs. Statistical Analysis: Univariate analysis. Results: 94% of the drivers were totally ignorant about AIDS. 82.9% and 43.8 % of the senior and junior drivers had a history of extra- marital sex and of these only 2 regularly used condoms. 13.8% and 3.3 % of the senior and junior drivers had a past or present history suggestive of STD infection. Alcohol and Opium were regularly used by them. Conclusion: The studied drivers are at a high risk of contracting and transmitting STDs including HIV.

Statistical investigation of avalanches of three-dimensional small-world networks and their boundary and bulk cross-sections

Science.gov (United States)

Najafi, M. N.; Dashti-Naserabadi, H.

2018-03-01

In many situations we are interested in the propagation of energy in some portions of a three-dimensional system with dilute long-range links. In this paper, a sandpile model is defined on the three-dimensional small-world network with real dissipative boundaries and the energy propagation is studied in three dimensions as well as the two-dimensional cross-sections. Two types of cross-sections are defined in the system, one in the bulk and another in the system boundary. The motivation of this is to make clear how the statistics of the avalanches in the bulk cross-section tend to the statistics of the dissipative avalanches, defined in the boundaries as the concentration of long-range links (α ) increases. This trend is numerically shown to be a power law in a manner described in the paper. Two regimes of α are considered in this work. For sufficiently small α s the dominant behavior of the system is just like that of the regular BTW, whereas for the intermediate values the behavior is nontrivial with some exponents that are reported in the paper. It is shown that the spatial extent up to which the statistics is similar to the regular BTW model scales with α just like the dissipative BTW model with the dissipation factor (mass in the corresponding ghost model) m2˜α for the three-dimensional system as well as its two-dimensional cross-sections.

The design and implementation of a garbage truck fleet management system

Directory of Open Access Journals (Sweden)

Chen, C. H.

2016-05-01

Full Text Available In recent years, the improvement of cloud computing and mobile computing techniques has led to the availability of a variety of mobile applications (‘apps’ in the app store. For instance, a garbage truck app that can provide the immediate location of a garbage truck, the location of collection points, and forecasted arrival times of garbage trucks would be useful for mobile users. Since the power consumption of apps on mobile devices if of concern to mobile users, an optimised power-saving mechanism for updating messages, which is based on location information, for a proposed garbage truck fleet management system (GTFMS is proposed and implemented in this paper. The GTFMS is a three- component system that includes the on-board units on garbage trucks, a fleet management system, and a garbage truck app. In this study, an arrival time forecasting method is designed and implemented in the fleet management system, so that the garbage truck app can retrieve the forecasted arrival time via web services. A message updating event is then triggered that reports the location of garbage truck and the forecasted arrival time. In experiments conducted on case studies, the results showed that the mean accuracy of predicted arrival time by the proposed method is about 81.45 per cent. As for power consumption, the cost of traditional mobile apps is 2,880 times that of the mechanism proposed in this study. Consequently, the GTFMS can provide the precise forecasted arrival time of garbage trucks to mobile users, while consuming less power.

A Psychodynamic Perspective of Workplace Bullying: Containment, Boundaries and a Futile Search for Recognition

Science.gov (United States)

White, Sheila

2004-01-01

This paper presents a psychodynamic perspective of workplace bullying. It focuses on two related psychoanalytical concepts, containment and boundaries. The life cycle theory of bullying builds on these concepts and describes in-depth the evolving relationship between a bully and a victim. The search for recognition by the bully and victim proves…

49 CFR 215.119 - Defective freight car truck.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Defective freight car truck. 215.119 Section 215... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD FREIGHT CAR SAFETY STANDARDS Freight Car Components Suspension System § 215.119 Defective freight car truck. A railroad may not place or continue in service a...

Crash risk factors for interstate large trucks in North Carolina.

Science.gov (United States)

Teoh, Eric R; Carter, Daniel L; Smith, Sarah; McCartt, Anne T

2017-09-01

Provide an updated examination of risk factors for large truck involvements in crashes resulting in injury or death. A matched case-control study was conducted in North Carolina of large trucks operated by interstate carriers. Cases were defined as trucks involved in crashes resulting in fatal or non-fatal injury, and one control truck was matched on the basis of location, weekday, time of day, and truck type. The matched-pair odds ratio provided an estimate of the effect of various driver, vehicle, or carrier factors. Out-of-service (OOS) brake violations tripled the risk of crashing; any OOS vehicle defect increased crash risk by 362%. Higher historical crash rates (fatal, injury, or all crashes) of the carrier were associated with increased risk of crashing. Operating on a short-haul exemption increased crash risk by 383%. Antilock braking systems reduced crash risk by 65%. All of these results were statistically significant at the 95% confidence level. Other safety technologies also showed estimated benefits, although not statistically significant. With the exception of the finding that short-haul exemption is associated with increased crash risk, results largely bolster what is currently known about large truck crash risk and reinforce current enforcement practices. Results also suggest vehicle safety technologies can be important in lowering crash risk. This means that as safety technology continues to penetrate the fleet, whether from voluntary usage or government mandates, reductions in large truck crashes may be achieved. Practical application: Results imply that increased enforcement and use of crash avoidance technologies can improve the large truck crash problem. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Vortex breakdown in closed containers with polygonal cross sections

International Nuclear Information System (INIS)

Naumov, I. V.; Dvoynishnikov, S. V.; Kabardin, I. K.; Tsoy, M. A.

2015-01-01

The vortex breakdown bubble in the confined flow generated by a rotating lid in closed containers with polygonal cross sections was analysed both experimentally and numerically for the height/radius aspect ratio equal to 2. The stagnation point locations of the breakdown bubble emergence and the corresponding Reynolds number were determined experimentally and in addition computed numerically by STAR-CCM+ CFD software for square, pentagonal, hexagonal, and octagonal cross section configurations. The flow pattern and the velocity were observed and measured by combining the seeding particle visualization and the temporal accuracy of laser Doppler anemometry. The vortex breakdown size and position on the container axis were determined for Reynolds numbers, ranging from 1450 to 2400. The obtained results were compared with the flow structure in the closed container of cubical and cylindrical configurations. It is shown that the measured evolution of steady vortex breakdown is in close agreement with the numerical results

Aerodynamics Research Revolutionizes Truck Design

Science.gov (United States)

2008-01-01

During the 1970s and 1980s, researchers at Dryden Flight Research Center conducted numerous tests to refine the shape of trucks to reduce aerodynamic drag and improved efficiency. During the 1980s and 1990s, a team based at Langley Research Center explored controlling drag and the flow of air around a moving body. Aeroserve Technologies Ltd., of Ottawa, Canada, with its subsidiary, Airtab LLC, in Loveland, Colorado, applied the research from Dryden and Langley to the development of the Airtab vortex generator. Airtabs create two counter-rotating vortices to reduce wind resistance and aerodynamic drag of trucks, trailers, recreational vehicles, and many other vehicles.

Advanced vehicle dynamics of heavy trucks with the perspective of road safety

Science.gov (United States)

Trigell, Annika Stensson; Rothhämel, Malte; Pauwelussen, Joop; Kural, Karel

2017-10-01

This paper presents state-of-the art within advanced vehicle dynamics of heavy trucks with the perspective of road safety. The most common accidents with heavy trucks involved are truck against passenger cars. Safety critical situations are for example loss of control (such as rollover and lateral stability) and a majority of these occur during speed when cornering. Other critical situations are avoidance manoeuvre and road edge recovery. The dynamic behaviour of heavy trucks have significant differences compared to passenger cars and as a consequence, successful application of vehicle dynamic functions for enhanced safety of trucks might differ from the functions in passenger cars. Here, the differences between vehicle dynamics of heavy trucks and passenger cars are clarified. Advanced vehicle dynamics solutions with the perspective of road safety of trucks are presented, beginning with the topic vehicle stability, followed by the steering system, the braking system and driver assistance systems that differ in some way from that of passenger cars as well.

Investigation of a marine magnetic polarity reversal boundary in cross section at the northern boundary of the Kane Megamullion, Mid-Atlantic Ridge, 23°40'N

Science.gov (United States)

Xu, Min; Tivey, M. A.

2016-05-01

Near-bottom magnetic field measurements made by the submersible Nautile during the 1992 Kanaut Expedition define the cross-sectional geometry of magnetic polarity reversal boundaries and the vertical variation of crustal magnetization in lower oceanic crust exposed along the Kane Transform Fault (TF) at the northern boundary of the Kane Megamullion (KMM). The KMM exposes lower crust and upper mantle rocks on a low-angle normal fault that was active between 3.3 Ma and 2.1 Ma. The geometry of the polarity boundaries is estimated from an inversion of the submarine magnetic data for crustal magnetization. In general, the polarity boundaries dip away from the ridge axis along the Kane TF scarp, with a west dipping angle of ~45° in the shallow (Williams (2007) that the lower crust cools through the Curie temperature of magnetite to become magnetic, with the polarity boundaries representing both frozen isotherms and isochrons. We also test the effects of the rotation of this isotherm structure and/or footwall rotation and find that the magnetic polarity boundary geometry is not sensitive to these directional changes.

US long-haul truck driver work organization and the association with cardiometabolic disease risk.

Science.gov (United States)

Hege, Adam; Lemke, Michael Kenneth; Apostolopoulos, Yorghos; Perko, Mike; Sönmez, Sevil; Strack, Robert

2017-09-03

Work organization, including long working hours, irregular work schedules, and job stress, has been associated with increased cardiometabolic disease (CMD) risk for numerous working populations. The purpose of this study was to examine the associations between work hours, work schedules, job stress, and CMD risk for a sample of US long-haul truck drivers (LHTDs). A nonexperimental, descriptive, cross-sectional design was employed to collect survey and anthropometric data from 260 US LHTDs at a major truck stop. The mean BMI was 33.40 kg/m 2 and mean waist circumference was 114.77 cm. Using logistic regression, researchers found longer work hours, especially greater than 11 hours daily, were associated with increased odds for an extremely high risk of CMD. Results support comprehensive and integrated approaches that address work organization, and in particular long working hours, to reduce drivers' CMD risk.

Being trusted: How team generational age diversity promotes and undermines trust in cross-boundary relationships.

Science.gov (United States)

Williams, Michele

2016-04-01

We examine how demographic context influences the trust that boundary spanners experience in their dyadic relationships with clients. Because of the salience of age as a demographic characteristic as well as the increasing prevalence of age diversity and intergenerational conflict in the workplace, we focus on team age diversity as a demographic social context that affects trust between boundary spanners and their clients. Using social categorization theory and theories of social capital, we develop and test our contextual argument that a boundary spanner's experience of being trusted is influenced by the social categorization processes that occur in dyadic interactions with a specific client and, simultaneously, by similar social categorization processes that influence the degree to which the client team as a whole serves as a cooperative resource for demographically similar versus dissimilar boundary spanner-client dyads. Using a sample of 168 senior boundary spanners from the consulting industry, we find that generational diversity among client team members from a client organization undermines the perception of being trusted within homogeneous boundary spanner-client dyads while it enhances the perception of being trusted within heterogeneous dyads. The perception of being trusted is an important aspect of cross-boundary relationships because it influences coordination and the costs associated with coordination. © 2015 The Author Journal of Organizational Behavior Published by John Wiley & Sons Ltd.

Boundary Transgressions: An Issue In Psychotherapeutic Encounter ...

African Journals Online (AJOL)

Boundary transgressions tend to be conceptualized on a continuum ranging from boundary crossings to boundary violations. Boundary crossings (e.g. accepting an inexpensive holiday gift from a client, unintentionally encountering a client in public, or attending a client's special event) are described in the literature as ...

Automatic detection of the carotid artery boundary on cross-sectional MR image sequences using a circle model guided dynamic programming

Directory of Open Access Journals (Sweden)

Brambs Hans

2011-04-01

Full Text Available Abstract Background Systematic aerobe training has positive effects on the compliance of dedicated arterial walls. The adaptations of the arterial structure and function are associated with the blood flow-induced changes of the wall shear stress which induced vascular remodelling via nitric oxide delivered from the endothelial cell. In order to assess functional changes of the common carotid artery over time in these processes, a precise measurement technique is necessary. Before this study, a reliable, precise, and quick method to perform this work is not present. Methods We propose a fully automated algorithm to analyze the cross-sectional area of the carotid artery in MR image sequences. It contains two phases: (1 position detection of the carotid artery, (2 accurate boundary identification of the carotid artery. In the first phase, we use intensity, area size and shape as features to discriminate the carotid artery from other tissues and vessels. In the second phase, the directional gradient, Hough transform, and circle model guided dynamic programming are used to identify the boundary accurately. Results We test the system stability using contrast degraded images (contrast resolutions range from 50% to 90%. The unsigned error ranges from 2.86% ± 2.24% to 3.03% ± 2.40%. The test of noise degraded images (SNRs range from 16 to 20 dB shows the unsigned error ranging from 2.63% ± 2.06% to 3.12% ± 2.11%. The test of raw images has an unsigned error 2.56% ± 2.10% compared to the manual tracings. Conclusions We have proposed an automated system which is able to detect carotid artery cross sectional boundary in MRI sequences during heart cycles. The accuracy reaches 2.56% ± 2.10% compared to the manual tracings. The system is stable, reliable and results are reproducible.

Solar hydrogen for urban trucks

Energy Technology Data Exchange (ETDEWEB)

Provenzano, J.: Scott, P.B.; Zweig, R. [Clean Air Now, Northridge, CA (United States)

1997-12-31

The Clean Air Now (CAN) Solar Hydrogen Project, located at Xerox Corp., El Segundo, California, includes solar photovoltaic powered hydrogen generation, compression, storage and end use. Three modified Ford Ranger trucks use the hydrogen fuel. The stand-alone electrolyzer and hydrogen dispensing system are solely powered by a photovoltaic array. A variable frequency DC-AC converter steps up the voltage to drive the 15 horsepower compressor motor. On site storage is available for up to 14,000 standard cubic feet (SCF) of solar hydrogen, and up to 80,000 SCF of commercial hydrogen. The project is 3 miles from Los Angeles International airport. The engine conversions are bored to 2.9 liter displacement and are supercharged. Performance is similar to that of the Ranger gasoline powered truck. Fuel is stored in carbon composite tanks (just behind the driver`s cab) at pressures up to 3600 psi. Truck range is 144 miles, given 3600 psi of hydrogen. The engine operates in lean burn mode, with nil CO and HC emissions. NO{sub x} emissions vary with load and rpm in the range from 10 to 100 ppm, yielding total emissions at a small fraction of the ULEV standard. Two trucks have been converted for the Xerox fleet, and one for the City of West Hollywood. A public outreach program, done in conjunction with the local public schools and the Department of Energy, introduces the local public to the advantages of hydrogen fuel technologies. The Clean Air Now program demonstrates that hydrogen powered fleet development is an appropriate, safe, and effective strategy for improvement of urban air quality, energy security and avoidance of global warming impact. Continued technology development and cost reduction promises to make such implementation market competitive.

UPS CNG Truck Fleet Start Up Experience: Alternative Fuel Truck Evaluation Project

International Nuclear Information System (INIS)

Walkowicz, K.

2001-01-01

UPS operates 140 Freightliner Custom Chassis compressed natural gas (CNG)-powered vehicles with Cummins B5.9G engines. Fifteen are participating in the Alternative Fuel Truck Evaluation Project being funded by DOE's Office of Transportation Technologies and the Office of Heavy Vehicle Technologies

DESIGN OF EXPERIMENTS IN TRUCK COMPANY

Directory of Open Access Journals (Sweden)

Bibiana Kaselyova

2015-07-01

Full Text Available Purpose: Design of experiment (DOE represent very powerful tool for process improvement vastly supported by six sigma methodology. This approach is mostly used by large and manufacturing orientated companies. Presented research is focused on use of DOE in truck company, which is medium size and service orientated. Such study has several purposes. Firstly, detailed description of improvement effort based on DOE can be used as a methodological framework for companies similar to researched one. Secondly, it provides example of successfully implemented low cost design of experiment practise. Moreover, performed experiment identifies key factors, which influence the lifetime of truck tyres.Design/methodology: The research in this paper is based on experiment conducted in Slovakian Truck Company. It provides detailed case study of whole improvement effort, together with problem formulation, design creation and analysis, as well as the results interpretation. The company wants to improve lifetime of the truck tyres. Next to fuel consumption, consumption of tyres and their replacement represent according to them, one of most costly processes in company. Improvement effort was made through the use of PDCA cycle. It start with analysis of current state of tyres consumption. The variability of tyres consumption based on years and types was investigated. Then the causes of tyres replacement were identified and screening DOE was conducted. After a screening design, the full factorial design of experiment was used to identify main drivers of tyres deterioration and breakdowns. Based on result of DOE, the corrective action were propose and implement.Findings: Based on performed experiment our research describes process of tyres use and replacement. It defines main reasons for tyre breakdown and identify main drivers which influence truck tyres lifetime. Moreover it formulates corrective action to prolong tyres lifetime.Originality: The study represents full

The Aggregate Planning For Trucking Operation in Cikarang Dry Port

Directory of Open Access Journals (Sweden)

Dwi Puspita Sari Utami

2015-06-01

Full Text Available Abstract. Cikarang Dry Port currently is the only dry port in Indonesia. This Dry Port has a role to connect or extend the Sea Port to the industrial areas located far from Sea Port. Thus, it creates a value added and also reduce costs. One of the operations done in Cikarang Dry Port is trucking operation. This research aims to examine the planning of 2014 trucking activity in Cikarang Dry Port to determine the right number of the truck that will be best occupied to manage all demands. The analysis begins with demand forecasting by using a moving average method of 12 months or one year period in 2013 which will be used as main information to develop the plans. There are three plans developed in this research. Based on the three plans, Plan A with minimum trucking plan with subcontracting is the most profitable which gives the highest profitability of Rp. 374,984,625. Recommendation for this research is using the current minimum number of 39 trucks rent with additional subcontracting when the demand is exceeding the capacity, thus, Cikarang Dry Port can occupy all demands and gain more profits. Keywords: Aggregate Planning; Scheduling; Trucking Operation; Moving Average; Cikarang Dry Port

The Aggregate Planning For Trucking Operation in Cikarang Dry Port

Directory of Open Access Journals (Sweden)

Dwi Puspita Sari Utami

2015-07-01

Full Text Available Abstract. Cikarang Dry Port currently is the only dry port in Indonesia. This Dry Port has a role to connect or extend the Sea Port to the industrial areas located far from Sea Port. Thus, it creates a value added and also reduce costs. One of the operations done in Cikarang Dry Port is trucking operation. This research aims to examine the planning of 2014 trucking activity in Cikarang Dry Port to determine the right number of the truck that will be best occupied to manage all demands. The analysis begins with demand forecasting by using a moving average method of 12 months or one year period in 2013 which will be used as main information to develop the plans. There are three plans developed in this research. Based on the three plans, Plan A with minimum trucking plan with subcontracting is the most profitable which gives the highest profitability of Rp. 374,984,625. Recommendation for this research is using the current minimum number of 39 trucks rent with additional subcontracting when the demand is exceeding the capacity, thus, Cikarang Dry Port can occupy all demands and gain more profits.Keywords: Aggregate Planning; Scheduling; Trucking Operation; Moving Average; Cikarang Dry Port

design and fabrication of a multipurpose railroad hand truck

African Journals Online (AJOL)

user

the guide rail was constructed using 50mm by 50mm mild steel angle bar. The hand truck is ... material handling management, a company's operational performance may ... pose a health risk especially where the hand truck has to be used ...

49 CFR 230.100 - Defects in tender truck axles and journals.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Defects in tender truck axles and journals. 230... Steam Locomotives and Tenders Running Gear § 230.100 Defects in tender truck axles and journals. (a... wheel seats that is more than 1/8 of an inch in depth. (b) Tender truck journal condemning defects...

Supplying of Assembly Lines Using Train of Trucks

Science.gov (United States)

Čujan, Zdeněk; Fedorko, Gabriel

2016-11-01

The typical supply system conceptions, i.e. the concepts "Just-in-time" (JIT) and "Just-in-sequence" (JIS) are very important factors with regard to a fluent operation of the assembly lines. Therefore the contemporary intra plant transport systems are being replaced by a new kind of the transportation technology, namely by means of the trains of trucks. The trains of trucks are used in two possible operational modes: either with a driver or without driver (fully automated). The trucks of the logistic trains are also cheaper and they are able to carry a larger volume and mass of the material at once. There are reduced in this way not only the investment costs, but also the operational expenses.

Administrative Area Boundaries 2 (State Boundaries), Region 9, 2010, NAVTEQ

Data.gov (United States)

U.S. Environmental Protection Agency — NAVTEQ Administrative Area Boundaries 2 (State Boundaries) for Region 9. There are five Administrative Area Boundaries layers (1, 2, 3, 4, 5). These layers contain...

Administrative Area Boundaries 4 (City Boundaries), Region 9, 2010, NAVTEQ

Data.gov (United States)

U.S. Environmental Protection Agency — NAVTEQ Administrative Area Boundaries 4 (City Boundaries) for Region 9. There are five Administrative Area Boundaries layers (1, 2, 3, 4, 5). These layers contain...

Computations for Truck Sliding with TRUCK 3.1 Code

Science.gov (United States)

1989-08-01

16 REFERENCES 1. L u. \\Villiam N.. Hobbs. Norman P. and Atkinson, Michael. TRUCK 3.1-An Improrcd Digital (’oiputtr Program for Calculating the Response...for Operations and Plans ATIN: Technical Libary Director of Chemical & Nuear Operations Dpartnt of the AIW Waskbington, DC 20310 1 Cocaeder US Ay...Lawrenoe Livermore Lab. ATIN: Code 2124, Tedhnical ATTN: Tech Info Dept L-3 Reports Libary P.O. Be 808 Monterey, CA 93940 Livermore, CA 94550 AFSC

Fuel Cell-Powered Lift Truck Fleet Deployment Projects Final Technical Report May 2014

Energy Technology Data Exchange (ETDEWEB)

Klingler, James J [GENCO Infrastructure Solutions, Inc.

2014-05-06

The overall objectives of this project were to evaluate the performance, operability and safety of fork lift trucks powered by fuel cells in large distribution centers. This was accomplished by replacing the batteries in over 350 lift trucks with fuel cells at five distribution centers operated by GENCO. The annual cost savings of lift trucks powered by fuel cell power units was between $2,400 and $5,300 per truck compared to battery powered lift trucks, excluding DOE contributions. The greatest savings were in fueling labor costs where a fuel cell powered lift truck could be fueled in a few minutes per day compared to over an hour for battery powered lift trucks which required removal and replacement of batteries. Lift truck operators where generally very satisfied with the performance of the fuel cell power units, primarily because there was no reduction in power over the duration of a shift as experienced with battery powered lift trucks. The operators also appreciated the fast and easy fueling compared to the effort and potential risk of injury associated with switching heavy batteries in and out of lift trucks. There were no safety issues with the fueling or operation of the fuel cells. Although maintenance costs for the fuel cells were higher than for batteries, these costs are expected to decrease significantly in the next generation of fuel cells, making them even more cost effective.

A Cognitive Analysis of Truck Drivers’ Right-hand Turns

DEFF Research Database (Denmark)

Sieker, Tobias Grønborg; G. Skulason, Thorgeir; Sletting, Kristian

2015-01-01

This paper presents an investigation of truck drivers’ performance during right-hand turns performed in intersections with traffic lights in order to elicit the truck drivers’ domain, decision-making processes, and the strategies used while executing the turn. To gain knowledge about this, a truc...

Plug-In Hybrid Urban Delivery Truck Technology Demonstration

Energy Technology Data Exchange (ETDEWEB)

Miyasato, Matt [South Coast Air Quality Management District Building Corporation, Diamond Bar, CA (United States); Impllitti, Joseph [South Coast Air Quality Management District Building Corporation, Diamond Bar, CA (United States); Pascal, Amar [South Coast Air Quality Management District Building Corporation, Diamond Bar, CA (United States)

2015-07-31

The I-710 and CA-60 highways are key transportation corridors in the Southern California region that are heavily used on a daily basis by heavy duty drayage trucks that transport the cargo from the ports to the inland transportation terminals. These terminals, which include store/warehouses, inland-railways, are anywhere from 5 to 50 miles in distance from the ports. The concentrated operation of these drayage vehicles in these corridors has had and will continue to have a significant impact on the air quality in this region whereby significantly impacting the quality of life in the communities surrounding these corridors. To reduce these negative impacts it is critical that zero and near-zero emission technologies be developed and deployed in the region. A potential local market size of up to 46,000 trucks exists in the South Coast Air Basin, based on near- dock drayage trucks and trucks operating on the I-710 freeway. The South Coast Air Quality Management District (SCAQMD), California Air Resources Board (CARB) and Southern California Association of Governments (SCAG) — the agencies responsible for preparing the State Implementation Plan required under the federal Clean Air Act — have stated that to attain federal air quality standards the region will need to transition to broad use of zero and near zero emission energy sources in cars, trucks and other equipment (Southern California Association of Governments et al, 2011). SCAQMD partnered with Volvo Trucks to develop, build and demonstrate a prototype Class 8 heavy-duty plug-in hybrid drayage truck with significantly reduced emissions and fuel use. Volvo’s approach leveraged the group’s global knowledge and experience in designing and deploying electromobility products. The proprietary hybrid driveline selected for this proof of concept was integrated with multiple enhancements to the complete vehicle in order to maximize the emission and energy impact of electrification. A detailed review of all

Planning of Truck Platoons: a Literature Review and Directions for Future Research

NARCIS (Netherlands)

A. Kishore Bhoopalam (Anirudh); N.A.H. Agatz (Niels); R.A. Zuidwijk (Rob)

2017-01-01

textabstractA truck platoon is a set of virtually linked trucks that drive closely behind one another using automated driving technology. Benefits of truck platooning include cost savings, reduced emissions, and more efficient utilization of road capacity. To fully reap these benefits in the initial

78 FR 25525 - Pilot Program on NAFTA Trucking Provisions

Science.gov (United States)

2013-05-01

...-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration..., which applied to participate in the Agency's long-haul pilot program to test and demonstrate the ability... long-haul trucking pilot program to test and demonstrate the ability of Mexico-domiciled motor carriers...

Friction and Wear Management Using Solvent Partitioning of Hydrophilic-Surface-Interactive Chemicals Contained in Boundary Layer-Targeted Emulsions

Science.gov (United States)

Richmond, Robert Chaffee (Inventor); Schramm, Jr., Harry F. (Inventor); Defalco, Francis G. (Inventor)

2015-01-01

Lubrication additives of the current invention require formation of emulsions in base lubricants, created with an aqueous salt solution plus a single-phase compound such that partitioning within the resulting emulsion provides thermodynamically targeted compounds for boundary layer organization thus establishing anti-friction and/or anti-wear. The single-phase compound is termed "boundary layer organizer", abbreviated BLO. These emulsion-contained compounds energetically favor association with tribologic surfaces in accord with the Second Law of Thermodynamics, and will organize boundary layers on those surfaces in ways specific to the chemistry of the salt and BLO additives. In this way friction modifications may be provided by BLOs targeted to boundary layers via emulsions within lubricating fluids, wherein those lubricating fluids may be water-based or oil-based.

ISAF'S Afghan Truck Drivers: The Overlooked Counterinsurgency Population

Directory of Open Access Journals (Sweden)

Myron Varouhakis

2015-12-01

Full Text Available A yearlong U.S. Army field study in Afghanistan examined the demographics and threat perceptions of one of the most-at-risk populations, that of Afghan truck drivers working for NATO’s International Security Assistance Force Afghanistan (ISAF. The study collected data from 766 Afghan truck drivers at the U.S.-operated Kandahar Airfield in ISAF’s Regional Command South. The findings show a wide diversity in age of the Afghan drivers as well as in terms of their home province. The findings also show that although all Afghan truck drivers had acute awareness and understanding of the high risks and dangers of the job, they all noted that the attractive salary and scarcity of jobs were dominant reasons for staying on the job. Findings also reveal a strong resentment among the Afghan truck drivers about their treatment by ISAF soldiers, as for the lack of protection for them and their families after the 2014 departure of NATO forces. The findings can provide significant insights and enhance the understanding of scholars, counterinsurgency strategists, policymakers, and military planners about “Host Country Nationals” as an important population of the human terrain.

Interplanetary sector boundaries 1971--1973

International Nuclear Information System (INIS)

Klein, L.; Burlaga, L.F.

1980-01-01

Eighteen interplanetary sector boundary crossings observed at 1 AU during the period January 1971 to January 1974 by the magnetometer on the Imp 6 spacecraft was discussed. The events were examined on many different time scales ranging from days on either side of the boundary to high-resolution measurements of 12.5 vectors per second. Two categories of boundaries were found, one group being relatively thin (averaging approx. =10 4 km) and the other being thick (averaging approx. =10 6 km). In many cases the field vector rotated in a plane from polarity to the other. Only two of the transitions were null sheets. Using the minimum variance analysis to determine the normals to the plane of rotationa and assuming that this is the same as the normal to the sector boundary surface, it was found that the normals were close to ( 0 ) the ecliptic plane. The high inclination of the sector boundary surfaces during 1971--1973 verifies a published prediction and may be related to the presence of large equatorial coronal holes at this time. An analysis of tangential discontinuities contained in 4-day periods about our events showed that their orientations were generally not related to the orientations of the sector boundary surface, but rather their characteristics were about the same as those for discontinuities outside the sector boundaries. Magnetic holes were found in thick sector boundaries, at a rate about 3 times that elsewhere. The holes were especially prevalent near stream interfaces, suggesting that they might be related to the convergence and/or slip of adjacent solar wind streams

27 CFR 24.229 - Tank car and tank truck requirements.

Science.gov (United States)

2010-04-01

... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.229 Tank car and tank truck requirements. Railroad tank cars and tank trucks used to transport spirits for use in wine production will be constructed...

Heavy truck modeling for fuel consumption. Simulations and measurements

Energy Technology Data Exchange (ETDEWEB)

Sandberg, T.

2001-12-01

Fuel consumption for heavy trucks depends on many factors like roads, weather, and driver behavior that are hard for a manufacturer to influence. However, one design possibility is the power train configuration. Here a new simulation program for heavy trucks is created to find the configuration of the power train that gives the lowest fuel consumption for each transport task. For efficient simulations the model uses production code for speed and gear control, and it uses exchangeable data sets to allow simulation of the whole production range of engine types, on recorded road profiles from all over the world. Combined with a graphical user interface this application is called STARS (Scania Truck And Road Simulation). The forces of rolling resistance and air resistance in the model are validated through an experiment where the propeller shaft torque of a heavy truck is measured. It is found that the coefficient of rolling resistance is strongly dependent on tire temperature, not only on vehicle speed as expected. This led to the development of a new model for rolling resistance. The model includes the dynamic behavior of the tires and relates rolling resistance to tire temperature and vehicle speed. In another experiment the fuel consumption of a test truck in highway driving is measured. The altitude of the road is recorded with a barometer and used in the corresponding simulations. Despite of the limited accuracy of this equipment the simulation program manage to predict a level of fuel consumption only 2% lower than the real measurements. It is concluded that STARS is a good tool for predicting fuel consumption for trucks in highway driving and for comparing different power train configurations.

Cross-boundary working: a generic worker for older people in the community.

Science.gov (United States)

Hek, Gill; Singer, Lorna; Taylor, Pat

2004-06-01

The care of older people often crosses the boundaries of health and social care. The new role of a health and social care trained generic worker was developed to provide comprehensive care for older people living at home. The role is a cross between a nursing auxiliary, health care assistant and a community support worker. The evaluation of the one-year pilot project demonstrated that clients were very satisfied with the care they received, particularly the emotional aspects of care. A high proportion of the generic workers time was spent listening and responding to their clients' mental health needs, and providing comfort and emotional support. Having been trained by local health professionals, the generic workers felt valued and respected, better able to communicate with their health colleagues, and therefore able to provide holistic care to their clients.

Pedestrian crossing situations: quantification of comfort boundaries to guide intervention timing.

Science.gov (United States)

Lubbe, Nils; Rosén, Erik

2014-10-01

Technical systems that warn or brake for vehicle-pedestrian encounters reduce injuries more effectively the earlier an intervention is initiated. However, premature intervention can irritate drivers, leading to system deactivation and, consequently, no injury reduction whatsoever. It has been proposed that no intervention should be initiated as long as attentive drivers are within their comfort zones. This study aims at quantifying driver comfort boundaries for pedestrian crossing situations to offer guidance for the appropriate timing of interventions. Sixty two volunteers drove through an intersection on a test track at 30 and 50km/h. A pedestrian dummy was launched from behind an obstruction towards the driving path of the approaching car. Brake onset indicated discomfort. Time to collision (TTC), longitudinal and lateral distance were measured at brake onset. TTC was independent of driving speed ranging from 2.1 to 4.3s with a median of 3.2s. Longitudinal distance ranged from 19 to 48 meters with an apparent difference between driving speeds. Lateral distances differed slightly, but significantly between driving speeds. The median was 3.1m (3.2m for 30km/h and 2.9m for 50km/h) and values ranged from 1.9 to 4.1m. Lateral distance in seconds ranged from 1.9 to 4.3s with a median value of 3.1s (3.2s for 30km/h and 3.0s for 50km/h). TTC was independent of driving speed, trial order and volunteer age. It might be considered suitable to intervene in situations where, for example, 90% of drivers have exceeded their comfort boundary, i.e. when drivers have already initiated braking. This percentile value translates to intervention at a TTC of 2.5s (95% confidence 2.4-2.7s). The study was limited to Swedish nationals, fully aware drivers, and two driving speeds, but did not investigate behavioural changes due to system interaction. This study showed that TTC at brake onset was a suitable measure for the quantification of driver comfort boundaries in pedestrian crossing

Activity Recognition and Localization on a Truck Parking Lot

NARCIS (Netherlands)

Andersson, M.; Patino, L.; Burghouts, G.J.; Flizikowski, A.; Evans, M.; Gustafsson, D.; Petersson, H.; Schutte, K.; Ferryman, J.

2013-01-01

In this paper we present a set of activity recognition and localization algorithms that together assemble a large amount of information about activities on a parking lot. The aim is to detect and recognize events that may pose a threat to truck drivers and trucks. The algorithms perform zone-based

Assessment of turkey vehicle container microclimate on transit during summer season conditions.

Science.gov (United States)

Carvalho, Rafael H; Honorato, Danielle C B; Guarnieri, Paulo D; Soares, Adriana L; Pedrão, Mayka R; Oba, Alexandre; Paião, Fernanda G; Ida, Elza I; Shimokomaki, Massami

2018-01-23

This study evaluated the formed microclimate commercial truck transport practices effects on the turkeys' welfare by measuring Dead on Arrival (DOA) index and pale, soft, and exudative (PSE-like) meat occurrence. The experimental design was entirely randomized in a 6 × 2 factorial arrangements (two truck container compartments × six water shower groups) with birds positioned at superior front (SF), inferior front (IF), superior middle (SM), inferior middle (IM), superior rear (SR), and inferior rear (IR) and two bath treatments: with water shower (WiS) and without water shower (WoS) with eight replications for each treatment. The animals were transported for 95 min' journey from the farm to the slaughterhouse under hot-humidity conditions. The results shown herein indicated the formation of a thermal core at the inferior middle and rear truck container regions, because the heat produced by the birds and the influence of developed microclimate consisting of temperature, relative humidity, and air ventilation. The IM and IR container compartments under the WoS treatment presented the highest (P container microclimate in transit. The formed microclimate during the commercial transport practices under hot-humidity conditions affected the bird's welfare consequently turkey meat qualities.

A comparison of pipeline versus truck transport of bio-oil.

Science.gov (United States)

Pootakham, Thanyakarn; Kumar, Amit

2010-01-01

Biomass-based energy and fuels are receiving attention because they are considered carbon neutral; i.e. the amount of CO(2) released during combustion of this biomass is nearly the same as that taken up by the plants during their growth. Bio-oil is a dark viscous liquid consisting of hydrocarbons. These are produced by fast pyrolysis of biomass. "As-is" biomass material has a low energy density (MJ m(-3)), hence, the cost of transporting this energy is high. Bio-oil has a high energy density as compared to "as-is" biomass material, consequently it helps in reducing the cost of energy transport. This study compares the life cycle assessment of transportation of bio-oil by pipeline with that by truck. The scope of the work includes the transportation of bio-oil by truck or pipeline from a centralized plant (supplied with forest biomass) to an end-user. Two cases are studied for pipeline transport of bio-oil: the first case considers a coal-based electricity supply for pumping the bio-oil through a pipeline; the second case considers an electricity supply from a renewable resource. The two cases of pipeline transport are compared to two cases of truck transport (truck trailer and super B-train truck). The life cycle greenhouse gas (GHG) emissions from the pipeline transport of bio-oil for the two cases of electricity supply are 345 and 17 g of CO(2) m(-3) km(-1), respectively. Similar values for transport by trailer (capacity - 30 m(3)) and super B-train truck (capacity - 60 m(3)) are 89 and 60 g of CO(2) m(-3) km(-1), respectively. Energy input for bio-oil transport is 3.95 MJ m(-3) km(-1) by pipeline, 2.59 MJ m(-3) km(-1) by truck and 1.66 MJ m(-3) km(-1) by super B-train truck. The results show that GHG emissions in pipeline transport are largely dependent on the source of electricity (higher for coal-based electricity). Substituting 250 m(3) day(-1) of pipeline-transported bio-oil for coal-based electricity can mitigate about 5.1 million tonnes of CO(2) per year

A new and self-contained presentation of the theory of boundary operators for slit diffraction and their logarithmic approximations

Energy Technology Data Exchange (ETDEWEB)

Gorenflo, Norbert [Beuth Hochschule fuer Technik Berlin (Germany). Fachbereich II; Kunik, Matthias [Magdeburg Univ. (Germany). Inst. fuer Analysis und Numerik

2009-07-01

We present a new and self-contained theory for mapping properties of the boundary operators for slit diffraction occurring in Sommerfeld's diffraction theory, covering two different cases of the polarisation of the light. This theory is entirely developed in the context of the boundary operators with a Hankel kernel and not based on the corresponding mixed boundary value problem for the Helmholtz equation. For a logarithmic approximation of the Hankel kernel we also study the corresponding mapping properties and derive explicit solutions together with certain regularity results. (orig.)

Impact of left lane truck restriction strategies on multilane highways in Louisiana : a literature review.

Science.gov (United States)

2009-04-01

Truck lane restriction strategies (TLRS) are a means of managing truck traffic on highways by prohibiting trucks from using certain lanes to minimize interaction between trucks and other vehicles. The purpose of this study is to review the literature...

Waste Management's LNG Truck Fleet: Final Results

Energy Technology Data Exchange (ETDEWEB)

Chandler, K. [Battelle (US); Norton, P. [National Renewable Energy Laboratory (US); Clark, N. [West Virginia University (US)

2001-01-25

Waste Management, Inc., began operating a fleet of heavy-duty LNG refuse trucks at its Washington, Pennsylvania, facility. The objective of the project was to provide transportation professionals with quantitative, unbiased information on the cost, maintenance, operational, and emissions characteristics of LNG as one alternative to conventional diesel for heavy-duty trucking applications.

Assessment of turkey vehicle container microclimate on transit during summer season conditions

Science.gov (United States)

Carvalho, Rafael H.; Honorato, Danielle C. B.; Guarnieri, Paulo D.; Soares, Adriana L.; Pedrão, Mayka R.; Oba, Alexandre; Paião, Fernanda G.; Ida, Elza I.; Shimokomaki, Massami

2018-01-01

This study evaluated the formed microclimate commercial truck transport practices effects on the turkeys' welfare by measuring Dead on Arrival (DOA) index and pale, soft, and exudative (PSE-like) meat occurrence. The experimental design was entirely randomized in a 6 × 2 factorial arrangements (two truck container compartments × six water shower groups) with birds positioned at superior front (SF), inferior front (IF), superior middle (SM), inferior middle (IM), superior rear (SR), and inferior rear (IR) and two bath treatments: with water shower (WiS) and without water shower (WoS) with eight replications for each treatment. The animals were transported for 95 min' journey from the farm to the slaughterhouse under hot-humidity conditions. The results shown herein indicated the formation of a thermal core at the inferior middle and rear truck container regions, because the heat produced by the birds and the influence of developed microclimate consisting of temperature, relative humidity, and air ventilation. The IM and IR container compartments under the WoS treatment presented the highest (P welfare consequently turkey meat qualities.

Powershift transmission for dump trucks; Neues Lastschaltgetriebe fuer Dump Trucks

Energy Technology Data Exchange (ETDEWEB)

Rebholz, Wolfgang; Geis, Joerg; Riedhammer, Michael [ZF Friedrichshafen AG, Friedrichshafen (Germany)

2012-04-15

Articulated dumpers (also called dump trucks) are used in many locations where large quantities of earth, spoil, gravel or other materials have to be moved on construction sites or in quarries. ZF has developed a new transmission with eight forward and four reverse gears up to production standard specifically for use in these vehicles. The integrated primary retarder is continuously controllable and provides maximum braking torque of up to 1800 Nm. (orig.)

Truck accident involving unirradiated nuclear fuel

International Nuclear Information System (INIS)

Carlson, R.W.; Fischer, L.E.

1992-07-01

In the early morning of Dec. 16, 1991, a severe accident occurred when a passenger vehicle traveling in the wrong direction collided with a tractor trailer carrying 24 nuclear fuel assemblies in 12 containers on Interstate 1-91 in Springfield, Massachusetts. This paper documents the mechanical circumstances of the accident and the physical environment to which the containers were exposed and the response of the containers and their contents. The accident involved four impacts where the truck was struck by the car, impacted on the center guardrail, impacted on the outer concrete barrier and came to rest against the center guardrail. The impacts were followed by a fire that began in the engine compartment, spread to the.tractor and cab, and eventually spread to the trailer and payload. The fire lasted for about three hours and the packages were involved in the fire for about two hours. As a result of the fire, the tractor-trailer was completely destroyed and the packages were exposed to flames with temperatures between 1300 degrees F and 1800 degrees F. The fuel assemblies remained intact during the accident and there was no release of any radioactive material during the accident. This was a very severe accident; however, the injuries were minor and at no time was the public health and safety at risk

Truck accident involving unirradiated nuclear fuel

International Nuclear Information System (INIS)

Carlson, R.W.; Fischer, L.E.

1993-01-01

In the early morning of Dec. 16, 1991, a severe accident occurred when a passenger vehicle traveling in the wrong direction collided with a tractor trailer carrying 24 unirradiated nuclear fuel assemblies in 12 containers on Interstate I-91 in Springfield, Massachusetts. This paper documents the mechanical circumstances of the accident and assesses the physical environment to which the containers were exposed and the response of the containers and their contents. The accident involved four impacts where the truck was struck by the car, impacted on the center guardrail, impacted on the outer concrete barrier and came to rest against the center guardrail. The impacts were followed by a fire that began in the engine compartment, spread to the tractor and cab, and eventually spread to the trailer and payload. The fire lasted for about three hours and the packages were involved in the fire for about two hours. As a result of the fire, the tractor-trailer was completely destroyed and the packages were exposed to flames with temperatures between 1,300 F and 1,800 F. The fuel assemblies remained intact during the accident and there was no release of any radioactive material during the accident. This was a very severe accident; however, the injuries were minor and at no time was the public health and safety at risk

The Control of Welding Deformation of the Three-Section Arm of Placing Boom of HB48B Pump Truck

Science.gov (United States)

Wang, Zhi-ling

2018-02-01

The concrete pump truck is the construction equipment of conveying concrete with self contained base plate and distributing boom. It integrates the pump transport mechanism of the concrete pump, and the hydraulic roll-folding type distributing boom used to distribute materials, and the supporting mechanism into the automobile chassis, and it is the concrete conveying equipment with high efficient and the functions of driving, pumping, and distributing materials. The placing boom of the concrete pump truck is the main force member in the pump parts with bearing great pressure, and its stress condition is complex. Taking the HB48B placing boom as an example, this paper analyzes and studies the deformation produced by placing boom of pump truck, and then obtains some main factors affecting the welding deformation. Through the riveter “joint” size, we controlled the process parameters, post-welding processing, and other aspects. These measures had some practical significance to prevent, control, and reduce the deformation of welding.

Boundary Crossing Issues Between Academia, Business and Government

Directory of Open Access Journals (Sweden)

Kay Fielden

2005-12-01

Full Text Available In this paper issues arising from crossing boundaries between the three worlds of academia, business and government in performing informatics research are explored. In particular the issues arising for informatics researchers in conducting case studies in business are explored following the qualitative research phases set out by Denzin and Lincoln (2000. Habermas (1996 provides a philosophical and structural framework on which to base this exploration. Informatics case study research is selected to deconstruct because it is the most common qualitative method chosen by informatics researchers. The framework developed in this paper is one attempt to address Hirschheim and Klein's (2003 claim that the field of information systems is a 'fragmented adhocracy' in which disconnects exist between researchers and practitioners in business, researchers and government, researchers and the rest of academia and also within the ever growing context in which informatics research takes place. Such a framework provides a navigation aid for dealing with the complex issues associated with dilemmas, disconnect and distortions that may arise in undertaking case study research.

Truck Route Choice Modeling using Large Streams of GPS Data

Science.gov (United States)

2017-07-31

The primary goal of this research was to use large streams of truck-GPS data to analyze travel routes (or paths) chosen by freight trucks to travel between different origin and destination (OD) location pairs in metropolitan regions of Florida. Two s...

49 CFR 230.108 - Steam locomotive leading and trailing trucks.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Steam locomotive leading and trailing trucks. 230... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Steam Locomotives and Tenders Trucks, Frames and Equalizing System § 230.108 Steam locomotive leading...

How do western abyssal currents cross the equator?

Science.gov (United States)

Nof, Doron; Olson, Donald B.

1993-02-01

Previous investigations of upper ocean currents on a β-plane have shown that it is quite difficult for a parcel of fluid to cross the equator in the open ocean. Boundary currents sometimes can cross the equator, but even this crossing is not easily achieved. The main barrier for equatorial crossing of inviscid western boundary currents is the presence of a front on the open ocean side ( NOF, 1990, Deep-Sea Research, 37, 853-875). One-and-a-half and 2 1/2 layer models are used to examine how this frontal blocking constraint is modified by bottom topography. Both models show that some topographic features, such as the Mid-Atlantic Ridge, may entirely relax the frontal blocking constraint. The single layer crossing is modeled in terms of a heavy double-fronted inertial current (overlaid by a stagnant infinitely deep upper layer) flowing northward in a parabolic channel. Analytic solutions show that the current's position "flips" as it crosses the equator, it is situated next to the left flank of the channel (i.e. the western boundary) in the southern hemisphere and next to the right flank (i.e. the eastern part of the channel corresponding to the western side of the the mid-ocean ridge) in the northern hemisphere. With the aid of the above model, a 2 1/2 layer model, which contains an additional intermediate current above the core, is considered. It is found that the nonfrontal southward (or northward) intermediate flow crosses the equator and remains adjacent to the western boundary. In contrast, the deep frontal flow underneath again "flips" from the left to the right boundary as it crosses the equator. Possible application of this theory to the dense Antarctic Bottom Water (AABW) and the Lower North Atlantic Deep Water (LNADW) is discussed.

Investigation of human body vibration exposures on haul trucks operating at U.S. surface mines/quarries relative to haul truck activity

Science.gov (United States)

Mayton, Alan G.; Porter, William L.; Xu, Xueyan S.; Weston, Eric B.; Rubenstein, Elaine N.

2018-01-01

Workers who operate mine haul trucks are exposed to whole-body vibration (WBV) on a routine basis. Researchers from the National Institute for Occupational Safety and Health (NIOSH) Pittsburgh Mining Research Division (PMRD) investigated WBV and hand-arm vibration (HAV) exposures for mine/quarry haul truck drivers in relation to the haul truck activities of dumping, loading, and traveling with and without a load. The findings show that WBV measures in weighted root-mean-square accelerations (aw) and vibration dose value (VDV), when compared to the ISO/ANSI and European Directive 2002/44/EC standards, were mostly below the Exposure Action Value (EAV) identified by the health guidance caution zone (HGCZ). Nevertheless, instances were recorded where the Exposure Limit Value (ELV) was exceeded by more than 500 to 600 percent for VDVx and awx, respectively. Researchers determined that these excessive levels occurred during the traveling empty activity, when the haul truck descended down grade into the pit loading area, sliding at times, on a wet and slippery road surface caused by rain and overwatering. WBV levels (not normalized to an 8-h shift) for the four haul truck activities showed mean awz levels for five of the seven drivers exceeding the ISO/ANSI EAV by 9–53 percent for the traveling empty activity. Mean awx and awz levels were generally higher for traveling empty and traveling loaded and lower for loading/dumping activities. HAV for measures taken on the steering wheel and shifter were all below the HGCZ which indicates that HAV is not an issue for these drivers/operators when handling steering and shifting control devices. PMID:29725145

Full-scale locomotive dynamic crash testing and correlations : locomotive consist colliding with steel coil truck at grade crossing (test 3).

Science.gov (United States)

2011-09-01

This report presents the test results and finite element correlations of a full-scale dynamic collision between a locomotive and a highway truck loaded with two heavy steel coils. The locomotive consist was moving at 58 miles per hour before it struc...

Vehicle to Grid regulation services of electric delivery trucks: Economic and environmental benefit analysis

International Nuclear Information System (INIS)

Zhao, Yang; Noori, Mehdi; Tatari, Omer

2016-01-01

Highlights: • Potential net present revenues of electric truck based V2G regulation services are investigated. • GHG emission mitigation of V2G regulation services provided by electric trucks are quantified. • The total cost of ownership and the life-cycle GHG emissions of electric trucks are also analyzed. • V2G regulation services for electric trucks could yield considerable revenues and GHG emission savings. - Abstract: Concerns regarding the fuel costs and climate change impacts associated with petroleum combustion are among the main driving factors for the adoption of electric vehicles. Future commercial delivery truck fleets may include Battery Electric Vehicles (BEVs) and Extended Range Electric Vehicles (EREVs); in addition to savings on fuel and maintenance costs, the introduction of these grid accessible electric vehicles will also provide fleet owners with possible Vehicle to Grid (V2G) opportunities. This study investigates the potential net present revenues and greenhouse gas (GHG) emission mitigation of V2G regulation services provided by electric trucks in a typical fleet. The total cost of ownership and the life-cycle GHG emissions of electric trucks are also analyzed and compared to those of traditional diesel trucks. To account for uncertainties, possible ranges for key parameters are considered instead of only considering fixed single data values for each parameter. The results of this research indicate that providing V2G regulation services for electric trucks could yield considerable additional revenues ($20,000–50,000) and significant GHG emission savings (approximately 300 ton CO_2) compared to conventional diesel trucks.

Professional experience and traffic accidents/near-miss accidents among truck drivers.

Science.gov (United States)

Girotto, Edmarlon; Andrade, Selma Maffei de; González, Alberto Durán; Mesas, Arthur Eumann

2016-10-01

To investigate the relationship between the time working as a truck driver and the report of involvement in traffic accidents or near-miss accidents. A cross-sectional study was performed with truck drivers transporting products from the Brazilian grain harvest to the Port of Paranaguá, Paraná, Brazil. The drivers were interviewed regarding sociodemographic characteristics, working conditions, behavior in traffic and involvement in accidents or near-miss accidents in the previous 12 months. Subsequently, the participants answered a self-applied questionnaire on substance use. The time of professional experience as drivers was categorized in tertiles. Statistical analyses were performed through the construction of models adjusted by multinomial regression to assess the relationship between the length of experience as a truck driver and the involvement in accidents or near-miss accidents. This study included 665 male drivers with an average age of 42.2 (±11.1) years. Among them, 7.2% and 41.7% of the drivers reported involvement in accidents and near-miss accidents, respectively. In fully adjusted analysis, the 3rd tertile of professional experience (>22years) was shown to be inversely associated with involvement in accidents (odds ratio [OR] 0.29; 95% confidence interval [CI] 0.16-0.52) and near-miss accidents (OR 0.17; 95% CI 0.05-0.53). The 2nd tertile of professional experience (11-22 years) was inversely associated with involvement in accidents (OR 0.63; 95% CI 0.40-0.98). An evident relationship was observed between longer professional experience and a reduction in reporting involvement in accidents and near-miss accidents, regardless of age, substance use, working conditions and behavior in traffic. Copyright © 2016 Elsevier Ltd. All rights reserved.

IMPROVING THE ORGANIZATION OF THE SHOVEL-TRUCK SYSTEMS IN OPEN-PIT COAL MINES

Directory of Open Access Journals (Sweden)

Mark KORYAGIN

2017-06-01

Full Text Available The aim of the study is to reduce idle times of mining trucks and shovels in an open-pit coal mine. A heuristic algorithm for making dispatching decisions in conditions of dynamic allocation of trucks is developed. Priority parameters for choosing the shovel after the end-of-truck unloading are introduced. Also, an algorithm for searching for the optimal priority parameters to satisfy the required efficiency criterion is developed. This algorithm is based on a simulation model of a shovel-truck system. The proposed approach is applicable in terms of the group of shovels with a common dump point in various open-pit coal mines. The importance of this work lies in the fact that the proposed model takes into account the random factors related with the duration of loading and dumping, truck movement, repair of shovels and haul trucks, as well as the duration of periods between repairs.

An empirical study of DSRC V2V performance in truck platooning scenarios

Directory of Open Access Journals (Sweden)

Song Gao

2016-11-01

Full Text Available Among many safety applications enabled by Dedicated Short Range Communication (DSRC, truck platooning provides many incentives to commercial companies. This paper studies DSRC Vehicle-to-Vehicle (V2V performance in truck platooning scenarios through real-world experiments. Commercial DSRC equipments and semi-trailer trucks are used in this study. We mount one DSRC antenna on each side of the truck. One set of dynamic tests and a few sets of static tests are conducted to explore DSRC behaviors under different situations. From the test results, we verified some of our speculations. For example, hilly roads can affect delivery ratio and antennas mounted on opposite sides of a truck can suffer from low delivery ratio at curved roads. In addition, we also found that antennas can sometimes suffer from low delivery ratio even when the trucks are on straight roads, possibly due to reflections from the nearby terrain. Fortunately, the delivery ratio can be greatly improved by using the two side antennas alternately.

Acceptance test report for core sample trucks 3 and 4

International Nuclear Information System (INIS)

Corbett, J.E.

1996-01-01

The purpose of this Acceptance Test Report is to provide documentation for the acceptance testing of the rotary mode core sample trucks 3 and 4, designated as HO-68K-4600 and HO-68K-4647, respectively. This report conforms to the guidelines established in WHC-IP-1026, ''Engineering Practice Guidelines,'' Appendix M, ''Acceptance Test Procedures and Reports.'' Rotary mode core sample trucks 3 and 4 were based upon the design of the second core sample truck (HO-68K-4345) which was constructed to implement rotary mode sampling of the waste tanks at Hanford. Successful completion of acceptance testing on June 30, 1995 verified that all design requirements were met. This report is divided into four sections, beginning with general information. Acceptance testing was performed on trucks 3 and 4 during the months of March through June, 1995. All testing was performed at the ''Rock Slinger'' test site in the 200 West area. The sequence of testing was determined by equipment availability, and the initial revision of the Acceptance Test Procedure (ATP) was used for both trucks. Testing was directed by ICF-KH, with the support of WHC Characterization Equipment Engineering and Characterization Project Operations. Testing was completed per the ATP without discrepancies or deviations, except as noted

Modeling and Design of Hybrid PEM Fuel Cell Systems for Lift Trucks

DEFF Research Database (Denmark)

Hosseinzadeh, Elham

driven lift trucks are being used more and more in different companies to reduce their emissions. However, battery driven lift trucks need a long time to recharge and thus may be out of work for a long time. Fuel cell driven lift trucks diminish this problem and are therefore getting more attention...... in a fork-lift truck. In order for the ejector to operate in the largest possible range of load, different approaches (with fixed nozzle and variable nozzle ejectors) have been investigated. Different geometries have been studied in order to optimize the ejector. The optimization is carried out not only...... a virtual fork-lift system. This investigation examines important performance metrics, such as hydrogen consumption and battery SOC as a function of the fuel cell and battery size, control strategy, drive cycle, and load variation for a fork-lift truck system. This study can be used as a benchmark...

A Survival Analysis of the Impact of Boundary Crossings on Managerial Career Advancement up to Midcareer

Science.gov (United States)

Chen, Zheng; Veiga, John F.; Powell, Gary N.

2011-01-01

Although managers and professionals still compete in a career tournament for advancement and pay, the career boundaries that they cross in order to compete have changed. Traditionally, such individuals came up through the ranks within the same company by specializing in one functional area and changing, as needed, the geographic location of work…

Solving Vehicle Routing with Full Container Load and Time Windows

DEFF Research Database (Denmark)

Reinhardt, Line Blander; Spoorendonk, Simon; Pisinger, David

2012-01-01

A service provided by the liner shipping companies is the transport of containers by truck between the terminal and customers. These transports consist of import orders and export orders. Even though these transports concern containers and, therefore, each order is a full load, an import...

Demonstration Project 111, ITS/CVO Technology Truck, Final Project Report

Energy Technology Data Exchange (ETDEWEB)

Gambrell, KP

2002-01-11

In 1995, the planning and building processes began to design and develop a mobile demonstration unit that could travel across the nation and be used as an effective outreach tool. In 1997, the unit was completed; and from June 1997 until December 2000, the Federal Highway Administration (FHWA)/Federal Motor Carrier Safety Administration (FMCSA) mobilized the Technology Truck, also known as Demonstration Project No. 111, ''Advanced Motor Carrier Operations and Safety Technologies.'' The project featured the latest available state-of-the-practice intelligent transportation systems (ITS) technologies designed to improve both the efficiency and safety of commercial vehicle operations (CVO). The Technology Truck was designed to inform and educate the motor carrier community and other stakeholders regarding ITS technologies, thus gaining support and buy-in for participation in the ITS program. The primary objective of the project was to demonstrate new and emerging ITS/CVO technologies and programs, showing their impact on motor carrier safety and productivity. In order to meet the objectives of the Technology Truck project, the FHWA/FMCSA formed public/private partnerships with industry and with Oak Ridge National Laboratory to demonstrate and display available ITS/CVO technologies in a cooperative effort. The mobile demonstration unit was showcased at national and regional conferences, symposiums, universities, truck shows and other venues, in an effort to reach as many potential users and decision makers as possible. By the end of the touring phase, the ITS/CVO Technology Truck had been demonstrated in 38 states, 4 Canadian provinces, 88 cities, and 114 events; been toured by 18,099 people; and traveled 115,233 miles. The market penetration for the Technology Truck exceeded 4,000,000, and the website received more than 25,000 hits. In addition to the Truck's visits, the portable ITS/CVO kiosk was demonstrated at 31 events in 23 cites in 15

Weather delay costs to trucking.

Science.gov (United States)

2012-11-01

Estimates of the nations freight sector of transportation range to upwards of $600 billion of total gross domestic product with 70 percent of total value and 60 percent of total weight moving by truck. Weather-related delays can add significantly ...

BOUNDARY CONDITIONS IN GAP GEOMETRY

Energy Technology Data Exchange (ETDEWEB)

Rothenstein, W.; Helholtz, J.

1963-11-15

The procedure for calculnting the monoenergetic angular flux density in lattice cells including voids between fuel and moderator is discussed. Boundary conditions describThe thermal energy of a nuclear reactor may be conserved by using as the reactor coolant a hydrocarbon fraction boiling within the range 220 to 650 deg C (preferably 340 to 550 deg C) and containing not more than 5% of extraneous materials having neutron cross sections of > 10 barns. The hot coolant may either be cracked outside of the reactor or used to heat another petroleum hydrocarbon which is to be converted. (D.L.C.)

Estimation and analysis of multifactor productivity in truck transportation : 1987 - 2003

Science.gov (United States)

2009-02-01

The analysis has three objectives: 1) to estimate multifactor : productivity (MFP) in truck transportation during : 1987-2003; 2) to examine changes in multifactor productivity : in U.S. truck transportation, over time, and : to compare these changes...

Dynamics of dump truck entrance onto the hoist platform of a mine inclined elevator

Energy Technology Data Exchange (ETDEWEB)

Nosyrev, B.A.; Popov, Yu.V.; Mukhutdinov, Sh.D. (Sverdlovskii Gornyi Institut (USSR))

1989-01-01

Analyzes the feasibility of transporting heavy-duty dump trucks along slopes on special platforms in coal surface mines. The platforms are hoisted by winches. Theoretical problems associated with hoisting a loaded platform upwards are analyzed. Problems associated with truck travel in the platform area, its exact positioning and mechanical vibrations of the platform caused by truck movement are discussed. Vibrations of the platform with a loaded truck and vibration amplitudes are analyzed. Five states of the system are evaluated. Methods for prevention of excessive vibrations by optimization of platform design and use of flexible elements are evaluated. Optimum speed of truck movement for platform entering is recommended.

Six Reasons why hours of service regulations for truck drivers are violated

DEFF Research Database (Denmark)

Grøn, Sisse

2008-01-01

  ABSTRACT Two decades of research has established a correlation between tiredness and fatigue, and traffic accident involving truck drivers.  Regulations limiting the driving hours of truck drivers thus are necessary precautions. But compliance is a problem. The answer from authorities tend to b...... independency ideal among truck drivers. The last reason is that the drivers and their employers share an interest in long work hours.......  ABSTRACT Two decades of research has established a correlation between tiredness and fatigue, and traffic accident involving truck drivers.  Regulations limiting the driving hours of truck drivers thus are necessary precautions. But compliance is a problem. The answer from authorities tend...... is that the regulation seems to be designed to long distance driving, and has some short-comings when applied to short distance drivers. The third reason is that the regulation deprives the drivers of means to control their tiredness. The fourth reason is that the regulation limits room for planning ahead generally...

Large Truck Crash Causation Study (LTCCS)

Data.gov (United States)

Department of Transportation — The Large Truck* Crash Causation Study (LTCCS) is based on a three-year data collection project conducted by the Federal Motor Carrier Safety Administration (FMCSA)...

75 FR 56651 - ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting

Science.gov (United States)

2010-09-16

... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Trucking Industry Mobility & Technology... Transportation. ACTION: Notice. The Trucking Industry Mobility & Technology Coalition (TIMTC) Annual [[Page 56652...: Beating Gridlock with a Smart Grid; U.S. DOT Truck Technology Initiatives; and State and Federal...

Wavelet Cross-Spectrum Analysis of Multi-Scale Disturbance Instability and Transition on Sharp Cone Hypersonic Boundary Layer

International Nuclear Information System (INIS)

Jian, Han; Nan, Jiang

2008-01-01

Experimental measurement of hypersonic boundary layer stability and transition on a sharp cone with a half angle of 5° is carried out at free-coming stream Mach number 6 in a hypersonic wind tunnel. Mean and fluctuation surface-thermal-flux characteristics of the hypersonic boundary layer flow are measured by Pt-thin-film thermocouple temperature sensors installed at 28 stations on the cone surface along longitudinal direction. At hypersonic speeds, the dominant flow instabilities demonstrate that the growth rate of the second mode tends to exceed that of the low-frequency mode. Wavelet-based cross-spectrum technique is introduced to obtain the multi-scale cross-spectral characteristics of the fluctuating signals in the frequency range of the second mode. Nonlinear interactions both of the second mode disturbance and the first mode disturbance are demonstrated to be dominant instabilities in the initial stage of laminar-turbulence transition for hypersonic shear flow. (fundamental areas of phenomenology (including applications))

Field Measurement of Dynamic Compressive Stress Response of Pavement-Subgrade Induced by Moving Heavy-Duty Trucks

Directory of Open Access Journals (Sweden)

Lingshi An

2018-01-01

Full Text Available This paper presents the dynamic compressive stress response of pavement-subgrade induced by moving heavy-duty trucks. In order to study the distribution characteristic of dynamic pressure of pavement-subgrade in more detail, truck loadings, truck speeds, and dynamic pressure distributions at different depths were monitored under twenty-five working conditions on the section of Qiqihar-Nenjiang Highway in Heilongjiang Province, China. The effects of truck loading, truck speed, and depth on dynamic compressive stress response can be concluded as follows: (1 increasing truck loading will increase the dynamic pressure amplitude of subgrade-pavement and dominant frequencies are close to the characteristic frequencies caused by heavy-duty trucks at the speed of 70 km/h; (2 as truck speed increases, the dynamic pressure amplitudes of measuring points have an increasing tendency; the dynamic pressure spectrums are also significantly influenced by truck speed: the higher the truck speed, the wider the spectrum and the higher the dominant frequencies; (3 as depth increases, the dynamic pressure amplitudes of measuring points decrease rapidly. The influence of the front axle decreases gradually until disappearing and the compressive stress superposition phenomenon caused by rear double axles can be found with increasing depth.

Off-road truck-related accidents in U.S. mines.

Science.gov (United States)

Dindarloo, Saeid R; Pollard, Jonisha P; Siami-Irdemoosa, Elnaz

2016-09-01

Off-road trucks are one of the major sources of equipment-related accidents in the U.S. mining industries. A systematic analysis of all off-road truck-related accidents, injuries, and illnesses, which are reported and published by the Mine Safety and Health Administration (MSHA), is expected to provide practical insights for identifying the accident patterns and trends in the available raw database. Therefore, appropriate safety management measures can be administered and implemented based on these accident patterns/trends. A hybrid clustering-classification methodology using K-means clustering and gene expression programming (GEP) is proposed for the analysis of severe and non-severe off-road truck-related injuries at U.S. mines. Using the GEP sub-model, a small subset of the 36 recorded attributes was found to be correlated to the severity level. Given the set of specified attributes, the clustering sub-model was able to cluster the accident records into 5 distinct groups. For instance, the first cluster contained accidents related to minerals processing mills and coal preparation plants (91%). More than two-thirds of the victims in this cluster had less than 5years of job experience. This cluster was associated with the highest percentage of severe injuries (22 severe accidents, 3.4%). Almost 50% of all accidents in this cluster occurred at stone operations. Similarly, the other four clusters were characterized to highlight important patterns that can be used to determine areas of focus for safety initiatives. The identified clusters of accidents may play a vital role in the prevention of severe injuries in mining. Further research into the cluster attributes and identified patterns will be necessary to determine how these factors can be mitigated to reduce the risk of severe injuries. Analyzing injury data using data mining techniques provides some insight into attributes that are associated with high accuracies for predicting injury severity. Copyright © 2016

Planning of Truck Platoons: a Literature Review and Directions for Future Research

OpenAIRE

Kishore Bhoopalam, Anirudh; Agatz, Niels; Zuidwijk, Rob

2017-01-01

textabstractA truck platoon is a set of virtually linked trucks that drive closely behind one another using automated driving technology. Benefits of truck platooning include cost savings, reduced emissions, and more efficient utilization of road capacity. To fully reap these benefits in the initial phases requires careful planning of platoons based on trucks’ itineraries and time schedules. This paper provides a framework to classify various new transportation planning problems that arise in...

Trucks involved in fatal accidents codebook 2010 (Version October 22, 2012).

Science.gov (United States)

2012-11-01

This report provides documentation for UMTRIs file of Trucks Involved in Fatal Accidents : (TIFA), 2010, including distributions of the code values for each variable in the file. The 2010 : TIFA file is a census of all medium and heavy trucks invo...

Commercial border crossing and wait time measurement at the Pharr-Reynosa International Bridge.

Science.gov (United States)

2010-11-01

The objective of the research described in this report is to install and implement radio frequency : identification (RFID) technology to measure border crossing time and travel delay for : commercial trucks crossing from Mexico into Texas at the Phar...

Truck acceleration behavior study and acceleration lane length recommendations for metered on-ramps

Directory of Open Access Journals (Sweden)

Guangchuan Yang

2016-10-01

Full Text Available This paper investigated the actual truck acceleration capability at metered on-ramps. Truck acceleration performance data were collected through a video-based data collection method. A piecewise constant acceleration model was employed to capture truck acceleration characteristics. It was found that the existing acceleration length will affect truck drivers’ acceleration behavior. At the taper type ramp that has limited acceleration distance, acceleration profile indicated a decreasing trend with distance. While for the ramp with an auxiliary lane that has sufficient acceleration distance, it was found that the acceleration behavior is to have a high acceleration rate in the beginning, then acceleration rate decrease with speed increase, and high acceleration rate again as drivers approach the merging area. Field data show that the truck acceleration performance data documented in the ITE’s (Institute of Transportation Engineers “Traffic Engineering Handbook” are much lower than the field collected data. Also, based on the regression analysis of speed versus distance profiles, it was found that the AASHTO’s (American Association of State Highway and Transportation Officials Green Book acceleration length design guidance is insufficient to accommodate trucks at metered on-ramps. The required acceleration lengths for medium and heavy trucks are approximately 1.3 and 1.6 times of the Green Book design guideline, respectively.

Roadmap and technical white papers for the 21st century truck partnership

Energy Technology Data Exchange (ETDEWEB)

None, None

2006-12-01

21st Century Truck Partnership will support the development and implementation of technologies that will cut fuel use and emissions and enhance safety, affordability, and performance of trucks and buses.

Analysis of frame structure of medium and small truck crane

Science.gov (United States)

Cao, Fuyi; Li, Jinlong; Cui, Mengkai

2018-03-01

Truck crane is an important part of hoisting machinery. Frame, as the support component of the quality of truck crane, determines the safety of crane jib load and the rationality of structural design. In this paper, the truck crane frame is a box structure, the three-dimensional model is established in CATIA software, and imported into Hyperworks software for finite element analysis. On the base of doing constraints and loads for the finite element model of the frame, the finite element static analysis is carried out. And the static stress test verifies whether the finite element model and the frame structure design are reasonable; then the free modal analysis of the frame and the analysis of the first 8 - order modal vibration deformation are carried out. The analysis results show that the maximum stress value of the frame is greater than the yield limit value of the material, and the low-order modal value is close to the excitation frequency value, which needs to be improved to provide theoretical reference for the structural design of the truck crane frame.

Space, Scale and Languages: Identity Construction of Cross-Boundary Students in a Multilingual University in Hong Kong

Science.gov (United States)

Gu, Mingyue Michelle; Tong, Ho Kin

2012-01-01

Drawing on the notions of scale and space, this paper investigates identity construction among a group of mainland Chinese cross-boundary students by analysing their language choices and linguistic practices in a multilingual university in Hong Kong. The research illustrates how movement across spaces by these students produces varying index…

Improving the system of warranty service of trucks in foreign markets

Directory of Open Access Journals (Sweden)

Irina MAKAROVA

2015-03-01

Full Text Available The article is devoted to the practical methods development of improving one of the ways to ensure the health of trucks in the system warranty. Methodology is aimed at optimizing the processes of formation of warranty spare parts kits during the implementation of KAMAZ trucks in foreign markets. The example is given to demonstrate the importance of different factors in the formation of the warranty set for different regions. The algorithm was developed to assess the qualitative composition formed warranty package that will optimize the planning and organization of activity centers to improve operational reliability of commercial trucks. A basis for acceptance of the scientifically-proved decisions is the statistical data analysis of requests monitoring that allows organizing duly replacement of parts with expired service life, and also promotes customer servicing quality improvement and reliability of trucks by prevention of its failures.

Learning and teaching in the regional learning environment : enabling students and teachers to cross boundaries in multi-stakeholder practices

NARCIS (Netherlands)

Oonk, Carla

2016-01-01

Finding solutions for complex societal problems requires cross-boundary collaboration between multiple stakeholders who represent various practices, disciplines and perspectives. The authentic, multi-stakeholder Regional Learning Environment (RLE) is expected to develop higher education students’

Use of illicit drugs by truck drivers arriving at Paranaguá port terminal, Brazil.

Science.gov (United States)

Peixe, Tiago Severo; de Almeida, Rafael Menck; Girotto, Edmarlon; de Andrade, Selma Maffei; Mesas, Arthur Eumann

2014-01-01

The purpose of this study was to estimate the prevalence of recent use of illicit drugs among truck drivers who had parked their vehicles at the terminal port in Paranaguá City at Paraná State, southern Brazil. This cross-sectional study was part of a larger research project conducted among drivers at a regional Brazilian port. Data on professional characteristics, involvement in road traffic injuries, sleep, and use of alcohol and illicit drugs were collected using a questionnaire. Urine samples were collected and analyzed for amphetamines, cocaine, and cannabis using gas chromatography with mass spectrometric detection. Sixty-two drivers were included in the study. Toxicological analyses showed that 8.1 percent (95% confidence interval [CI], 2.7-17.8%) of the urine samples were positive for drugs (4.8% for cocaine, 1.6% for amphetamine, and 1.6% for both); 8.1 percent reported drug use during the preceding 30 days in the questionnaire and only one tested positive for the drug in the urine sample. No sample was positive for cannabinoids. In total, at least 14.5 percent (95% CI, 6.9-25.8%) had used illicit drugs during the preceding 30 days based on self-reports and urine testing. Drivers who reported involvement in traffic injuries the year before more often tested positive for drugs in biological samples (P illicit stimulants was common among professional truck drivers transporting grain loads. Thus, actions are needed to reduce drug use among truck drivers in order to prevent drug-related road traffic injuries.

A boundary integral method for numerical computation of radar cross section of 3D targets using hybrid BEM/FEM with edge elements

Science.gov (United States)

Dodig, H.

2017-11-01

This contribution presents the boundary integral formulation for numerical computation of time-harmonic radar cross section for 3D targets. Method relies on hybrid edge element BEM/FEM to compute near field edge element coefficients that are associated with near electric and magnetic fields at the boundary of the computational domain. Special boundary integral formulation is presented that computes radar cross section directly from these edge element coefficients. Consequently, there is no need for near-to-far field transformation (NTFFT) which is common step in RCS computations. By the end of the paper it is demonstrated that the formulation yields accurate results for canonical models such as spheres, cubes, cones and pyramids. Method has demonstrated accuracy even in the case of dielectrically coated PEC sphere at interior resonance frequency which is common problem for computational electromagnetic codes.

Multistage Mechanical Transmissions with Automatic Control for Advanced Trucks and Buses

Directory of Open Access Journals (Sweden)

Blokhin Aleksandr

2017-12-01

Full Text Available The study considers the basic trends of development of modern mechanical transmissions of trucks and buses. It provides the developed various series of multispeed transmissions with automatic control and a number of transmissions from 6 to 16 for trucks and buses. The paper shows the basic parameters of the standard series of new transmissions received on the basis of innovative technical solutions. It provides the results of experimental studies of 16-speed transmissions on a special test stand and on the road as part of a truck transmission. Theoretical and experimental data on the gear change time are compared.

Carbon monoxide poisoning in children riding in the back of pickup trucks.

Science.gov (United States)

Hampson, N B; Norkool, D M

OBJECTIVE - To describe the case characteristics of a series of children poisoned with carbon monoxide while traveling in the back of pickup trucks. DESIGN - Pediatric cases referred for treatment of carbon monoxide poisoning with hyperbaric oxygen between 1986 and 1991 were reviewed. Those cases that occurred during travel in the back of pickup trucks were selected. Clinical follow-up by telephone interview ranged from 2 to 55 months. SETTING - A private, urban, tertiary care center in Seattle, Wash. PATIENTS - Twenty children ranging from 4 to 16 years of age. INTERVENTION - All patients were treated with hyperbaric oxygen. MAIN OUTCOME MEASURES - Characteristics of the poisoning incident and clinical patient outcome. RESULTS - Of 68 pediatric patients treated for accidental carbon monoxide poisoning, 20 cases occurred as children rode in the back of pickup trucks. In 17 of these, the children were riding under a rigid closed canopy on the rear of the truck, while three episodes occurred as children rode beneath a tarpaulin. Average carboxyhemoglobin level on emergency department presentation was 18.2% +/- 2.4% (mean +/- SEM; range, 1.6% to 37.0%). Loss of consciousness occurred in 15 of the 20 children. One child died of cerebral edema, one had permanent neurologic deficits, and 18 had no recognizable sequelae related to the episode. In all cases, the truck exhaust system had a previously known leak or a tail pipe that exited at the rear rather than at the side of the pickup truck. CONCLUSIONS - Carbon monoxide poisoning is a significant hazard for children who ride in the back of pickup trucks. If possible, this practice should be avoided.

Increasing the impact of a master's programme on teacher leadership and school development by means of boundary crossing

NARCIS (Netherlands)

Snoek, Marco; Enthoven, Mascha; Kessels, Joseph; Volman, Monique

2015-01-01

In this case study, we investigate how the development and impact of teacher leadership through a Master’s programme can be supported by a design that encourages boundary crossing activities between schools and universities. The case study focuses on 42 experienced teachers from three vocational

Weapon container catalog. Volumes 1 & 2

Energy Technology Data Exchange (ETDEWEB)

Brown, L.A.; Higuera, M.C.

1998-02-01

The Weapon Container Catalog describes H-gear (shipping and storage containers, bomb hand trucks and the ancillary equipment required for loading) used for weapon programs and for special use containers. When completed, the catalog will contain five volumes. Volume 1 for enduring stockpile programs (B53, B61, B83, W62, W76, W78, W80, W84, W87, and W88) and Volume 2, Special Use Containers, are being released. The catalog is intended as a source of information for weapon program engineers and also provides historical information. The catalog also will be published on the SNL Internal Web and will undergo periodic updates.

Three-dimensional local ALE-FEM method for fluid flow in domains containing moving boundaries/objects interfaces

Energy Technology Data Exchange (ETDEWEB)

Carrington, David Bradley [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States); Monayem, A. K. M. [Univ. of New Mexico, Albuquerque, NM (United States); Mazumder, H. [Univ. of New Mexico, Albuquerque, NM (United States); Heinrich, Juan C. [Univ. of New Mexico, Albuquerque, NM (United States)

2015-03-05

A three-dimensional finite element method for the numerical simulations of fluid flow in domains containing moving rigid objects or boundaries is developed. The method falls into the general category of Arbitrary Lagrangian Eulerian methods; it is based on a fixed mesh that is locally adapted in the immediate vicinity of the moving interfaces and reverts to its original shape once the moving interfaces go past the elements. The moving interfaces are defined by separate sets of marker points so that the global mesh is independent of interface movement and the possibility of mesh entanglement is eliminated. The results is a fully robust formulation capable of calculating on domains of complex geometry with moving boundaries or devises that can also have a complex geometry without danger of the mesh becoming unsuitable due to its continuous deformation thus eliminating the need for repeated re-meshing and interpolation. Moreover, the boundary conditions on the interfaces are imposed exactly. This work is intended to support the internal combustion engines simulator KIVA developed at Los Alamos National Laboratories. The model's capabilities are illustrated through application to incompressible flows in different geometrical settings that show the robustness and flexibility of the technique to perform simulations involving moving boundaries in a three-dimensional domain.

The Production Measurement Model of Open Pit Mine Based on Truck Operation Diagram

Directory of Open Access Journals (Sweden)

Sun Xiao-Yu

2016-01-01

Full Text Available Conventional production measurement of truck dispatching system in open pit mine has not been effectively expressed by a mathematical model, which brings a negative effect on the subsequent data mining and a compatibility issue to apply the production measurement with fixed assignment of truck. In this study, based on the proposed concept that truck is not only the carrier of transport material, but also act as the bridges and linkages between the loading sites and the unloading sites, a new truck operation diagram was established, which was further developed to a basic data matrix and a production measurement model. The new model allowed to calculatethe production measurement of the transport, loading, unloading, material and etc, respectively, as well as with any calculation in combination of more than one factor as needed.It solved the compatibility issue between conventional production measurement and the production measurement of fixed assignment of truck with good practical results.

STRESS LOADING SIMULATION OF HYDRO-MECHANICAL TRANSMISSION OF DUMP TRUCK

Directory of Open Access Journals (Sweden)

S. A. Sidorov

2006-01-01

Full Text Available The Transmission model and software package to investigate stress loading of a hydromechanical transmission of a dump truck have been developed. The given software package allows to model stress loading of transmission gears in taking-off and acceleration modes at various road resistance, positions of an engine control pedal and initial revolutions of an engine crankshaft, various laws of friction clutch switching and some other parameters that permit to reveal a rate of various operational mode influence on stress loading of a dump truck transmission. An equivalence of the developed software is proved by the comparison of the experimentally obtained stress loading process of the hydro-mechanical transmission of a BelAZ- 7555 dump truck with the results of the simulation 

HIV/AIDS and the long-distance truck drivers in south-west Nigeria: A cross-sectional survey on the knowledge, attitude, risk behaviour and beliefs of truckers

Directory of Open Access Journals (Sweden)

Glory O. Atilola

2010-12-01

Full Text Available Summary: Objectives: According to the last HIV surveillance survey conducted in 2008, the overall National HIV prevalence in Nigeria stands at 4.6%. Recent studies and estimates by UNAIDS/WHO show higher prevalences in some selected states in Nigeria. The focus of this study is to determine the prevalence, risk behaviour, attitude and knowledge of HIV among long-distance heavy-truckers from a cross-sectional survey conducted in the south-west Nigeria. Methods: Four major truck terminals (devoted to long-distance trips in south western Nigeria were identified. A cross-sectional survey was conducted using a total sample size of 451 truckers who consented to be interviewed. A questionnaire (in English, Hausa and Yoruba languages for data collection on the socio-demographic, risk behaviour, attitude and knowledge of HIV from the truckers was also designed. The multiple logistic regressions analysis was used to assess the association between some selected variables and factors. Results: Only 164 (36.4% participants out of the study population of 451 were tested for HIV (due to limited test facilities and consent and the prevalence of HIV antibodies among the truckers was found to be 2.4% (4/164 with all the infected individuals being within 21–30 years of age. 309 (68.1% of the respondents admitted that they were at risk of contracting HIV while a total of 249 (55.3% admitted that they had more than one sexual partners. In addition, while 392 (86.9% said it was important for them to know their HIV status, 88 (19.5% said that they would commit suicide should they test positive for HIV. Conclusion: Although the HIV prevalence rate observed among the tested participants (2.4% was lower than the overall national prevalence (4.6%, the result calls for concern as it showed that the population of truckers is a potential high risk group in Nigeria. Also, the mobile nature of this high-risk group has made getting HIV/AIDS awareness messages across to them a

Effects of After-Treatment Control Technologies on Heavy-Duty Diesel Truck Emissions

Science.gov (United States)

Preble, C.; Dallmann, T. R.; Kreisberg, N. M.; Hering, S. V.; Harley, R.; Kirchstetter, T.

2015-12-01

Diesel engines are major emitters of nitrogen oxides (NOx) and the black carbon (BC) fraction of particulate matter (PM). Diesel particle filter (DPF) and selective catalytic reduction (SCR) emission control systems that target exhaust PM and NOx have recently become standard on new heavy-duty diesel trucks (HDDT). There is concern that DPFs may increase ultrafine particle (UFP) and total particle number (PN) emissions while reducing PM mass emissions. Also, the deliberate catalytic oxidation of engine-out NO to NO2 in continuously regenerating DPFs may lead to increased tailpipe emission of NO2 and near-roadway concentrations that exceed the 1-hr national ambient air quality standard. Increased NO2 emissions can also promote formation of ozone and secondary PM. We report results from ongoing on-road studies of HDDT emissions at the Port of Oakland and the Caldecott Tunnel in California's San Francisco Bay Area. Emission factors (g pollutant per kg diesel) were linked via recorded license plates to each truck's engine model year and installed emission controls. At both sites, DPF use significantly increased the NO2/NOx emission ratio. DPFs also significantly increased NO2 emissions when installed as retrofits on older trucks with higher baseline NOx emissions. While SCR systems on new trucks effectively reduce total NOx emissions and mitigate these undesirable DPF-related NO2 emissions, they also lead to significant emission of N2O, a potent greenhouse gas. When expressed on a CO2-equivalent basis, the N2O emissions increase offsets the fuel economy gain (i.e., the CO2 emission reduction) associated with SCR use. At the Port, average NOx, BC and PN emission factors from new trucks equipped with DPF and SCR were 69 ± 15%, 92 ± 32% and 66 ± 35% lower, respectively, than modern trucks without these emission controls. In contrast, at the Tunnel, PN emissions from older trucks retrofit with DPFs were ~2 times greater than modern trucks without DPFs. The difference

Analytical solution to energy management guaranteeing battery life for hybrid trucks

NARCIS (Netherlands)

Pham, H.T.; Kessels, J.T.B.A.; van den Bosch, P.P.J.; Huisman, R.G.M.

2016-01-01

This paper considers a parallel hybrid electric truck where the tractive force delivered to the wheels can be provided by a conventional internal combustion engine (ICE) and/or a motor generator (MG). This hybrid truck is equipped with a clutch system that is capable of decoupling the ICE and the MG

An innovative food truck chain, strategic planning inspired from the lean start up methodology

OpenAIRE

Peñate, Paul Tavares

2015-01-01

Mestardo em Marketing Suportada pela abordagem Lean , o Projecto apresenta um modelo de negócios de uma nova marca de Food Truck, inicialmente a ser lançada na Bélgca. Foodies’TruckZ é a marca sugerida para um novo modelo de negócio de Food Truck que procura inovar alavancando economias de escala, sobretudo em Marketing, e através de uma frota co-propriedade das carinhas food truck. Neste modelo de negócio a partilha no investimento do camião, na comunicação e outros aspectos de marketing ...

Technology Roadmap for the 21st Century Truck Program, a government-industry research partnership

Energy Technology Data Exchange (ETDEWEB)

None

2000-12-01

The 21st Century Truck Program has been established as a government-industry research partnership to support the development and implementation of commercially viable technologies that will dramatically cut fuel use and emissions of commercial trucks and buses while enhancing their safety and affordability as well as maintaining or enhancing performance. The innovations resulting from this program will reduce dependence on foreign oil, improve our nation's air quality, provide advanced technology for military vehicles, and enhance the competitiveness of the U.S. truck and bus industry while ensuring safe and affordable freight and bus transportation for the nation's economy. This Technology Roadmap for the 21st Century Truck Program has been prepared to guide the development of the technical advancements that will enable the needed improvements in commercial truck fuel economy, emissions, and safety.

A boundary integral equation for boundary element applications in multigroup neutron diffusion theory

International Nuclear Information System (INIS)

Ozgener, B.

1998-01-01

A boundary integral equation (BIE) is developed for the application of the boundary element method to the multigroup neutron diffusion equations. The developed BIE contains no explicit scattering term; the scattering effects are taken into account by redefining the unknowns. Boundary elements of the linear and constant variety are utilised for validation of the developed boundary integral formulation

Truck side guard specifications : recommended standard

Science.gov (United States)

2016-09-01

This document is intended to be used by (1) public or private medium/heavy-duty truck fleets considering adding side guards; (2) jurisdictions or customers that require side guards through policy or procurement; (3) manufacturers of side guards; and ...

A New Method for Haul Road Design in Open-Pit Mines to Support Efficient Truck Haulage Operations

Directory of Open Access Journals (Sweden)

Jieun Baek

2017-07-01

Full Text Available The design of a haul road for an open-pit mine can significantly affect the cost associated with hauling ore and waste to the surface. This study proposes a new method for haul road design in open-pit mines to support efficient truck haulage operations. The road layout in open-pit mines was optimized by using raster-based least-cost path analysis, and the resulting zigzag road sections were simplified by applying the Douglas-Peucker algorithm. In addition, the road layout was modified by reflecting the radius of curvature suggested in the road design guides. Finally, a three-dimensional model reflecting the results of the road design was created by combining the road layout modification result with the slope of the open-pit mine and the bench design result. The application of the proposed method to an area containing gold deposits made it possible to design a haul road for open-pit mines such that it supported efficient truck haulage operations; furthermore, the time required for truck movement along the road could be estimated. The proposed method is expected to be useful for planning and designing open-pit mines and to facilitate the improvement of the road design function of existing mining software applications.

Effects of irregular-shift work and physical activity on cardiovascular risk factors in truck drivers

Directory of Open Access Journals (Sweden)

Elaine Cristina Marqueze

2013-06-01

Full Text Available OBJECTIVE: To analyze the putative effect of type of shift and its interaction with leisure-time physical activity on cardiovascular risk factors in truck drivers. METHODS: A cross-sectional study was undertaken on 57 male truck drivers working at a transportation company, of whom 31 worked irregular shifts and 26 worked on the day-shift. Participants recorded their physical activity using the International Physical Activity Questionnaire along with measurements of blood pressure, body mass index and waist-hip ratio. Participants also provided a fasting blood sample for analysis of lipid-related outcomes. Data were analyzed using a factorial model which was covariate-controlled for age, smoking, work demand, control at work and social support. RESULTS: Most of the irregular-shift and day-shift workers worked more than 8 hours per day (67.7% and 73.1%, respectively. The mean duration of experience working the irregular schedule was 15.7 years. Day-shift workers had never engaged in irregular-shift work and had been working as a truck driver for 10.8 years on average. The irregular-shift drivers had lower work demand but less control compared to day-shift drivers (p < 0.05. Moderately-active irregular-shift workers had higher systolic and diastolic arterial pressures (143.7 and 93.2 mmHg, respectively than moderately-active day-shift workers (116 and 73.3 mmHg, respectively (p < 0.05 as well as higher total cholesterol concentrations (232.1 and 145 mg/dl, respectively (p = 0.01. Irrespective of their physical activity, irregular-shift drivers had higher total cholesterol and LDL-cholesterol concentrations (211.8 and 135.7 mg/dl, respectively than day-shift workers (161.9 and 96.7 mg/dl, respectively (ANCOVA, p < 0.05. CONCLUSIONS: Truck drivers are exposed to cardiovascular risk factors due to the characteristics of the job, such as high work demand, long working hours and time in this profession, regardless of shift type or leisure-time physical

27 CFR 24.230 - Examination of tank car or tank truck.

Science.gov (United States)

2010-04-01

... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Spirits § 24.230 Examination of tank car or tank truck. Upon arrival of a tank car or tank truck at the bonded wine premises, the proprietor shall... calibration chart is available at the bonded wine premises, the spirits may be gauged by volume in the tank...

Probabilistic safety analysis about the radiation risk for the driver in a fast-scan container/vehicle inspection system

International Nuclear Information System (INIS)

Li Junli; Zhu Guoping; Ming Shenjin; Cao Yanfeng

2008-01-01

A new Container/Vehicle Inspection System called fast-scan inspection system has been developed and used in some countries, which has a special advantage in scanning efficiency of 200 - 400 containers per hour. However, for its unique scanning mode, the fast-scan inspection system causes some worries about the radiation risk for the truck drivers, who will drive the container truck to pass through the scanning tunnel and might be exposed by the radiation beam in accidents. A PSA analysis, which has been widely used to evaluate the safety of nuclear power plant in the past, is presented here to estimate the probability of accidental exposure to the driver and evaluate the health risk. The fault tree and event tree analysis show that the probability of accidental exposure to the driver is pretty low and the main failure contributions are human errors and scanning control devices failures, which provides some recommendations for the further improvement about this product. Furthermore, on the basic of ICRP No.60 and 76 reports, the health risk to the truck driver is only about 4.0x10 -14 /a. Compared with the exempt level of 5x10 -7 /a, it can be concluded that the fast-scan system is safe enough for the truck driver. (author)

Noise abatement technique for large vehicles of bus and truck families; Basu / torakku kei ogata sharyo no tei soon ka gijutsu

Energy Technology Data Exchange (ETDEWEB)

Takatsuki, K. [Isuzu Motors Ltd., Tokyo (Japan)

1997-09-25

It is remarked that noises in the cab of large buses and large trucks have been reduced about 10dB(A) during last 15 years, and experimental analytical methods for the noise abatement in the cab of these vehicles are introduced together with cases where measures are incorporated. Firstly, contribution to noise by each noise source is explained and a test method of noise exposure by the partial division of a large truck cab is presented, and on the base of the result obtained, it is found that the measures against the engin noise taken in cooperation with car manufacturer reside on the selection of noise absorbing/isolating materials and the actual examples are shown for a truck floor and the upper noise-proof structure of a bus. There are peaks at 100, 250 and 400 Hz on the noise spectra of an admission port, and they correspond to the problematic frequencies. Their analytical methods are presented comprising a speaker test, a simulation analysis and a boundary element method together with models and calculation examples. As for measures against the noise and vibration in the admission system, installation of resonator and vibration isolation by rubber are mentioned. Lastly, a synopsis on noise phenomena of the driving system is established and a twist resonance phenomenon that frequently occurs in the driving system is particularly described including their examples of analysis and countermeasures. 3 refs., 22 figs., 1 tab.

Influences on Energy Savings of Heavy Trucks Using Cooperative Adaptive Cruise Control

Energy Technology Data Exchange (ETDEWEB)

Lammert, Michael P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); McAuliffe, Brian [National Research Council Canada; Lu, Xiao-Yun [University of California-Berkeley; Shladover, Steven [University of California-Berkeley; Surcel, Marius-Dorin [FPInnovations; Kailas, Aravind [Volvo Group

2018-04-03

An integrated adaptive cruise control (ACC) and cooperative ACC (CACC) was implemented and tested on three heavy-duty tractor-trailer trucks on a closed test track. The first truck was always in ACC mode, and the followers were in CACC mode using wireless vehicle-vehicle communication to augment their radar sensor data to enable safe and accurate vehicle following at short gaps. The fuel consumption for each truck in the CACC string was measured using the SAE J1321 procedure while travelling at 65 mph and loaded to a gross weight of 65,000 lb, demonstrating the effects of: inter-vehicle gaps (ranging from 3.0 s or 87 m to 0.14 s or 4 m, covering a much wider range than previously reported tests), cut-in and cut-out maneuvers by other vehicles, speed variations, the use of mismatched vehicles (standard trailers mixed with aerodynamic trailers with boat tails and side skirts), and the presence of a passenger vehicle ahead of the platoon. The results showed that energy savings generally increased in a non-linear fashion as the gap was reduced. The middle truck saved the most fuel at gaps shorter than 12 m and the trailing truck saved the most at longer gaps, while lead truck saved the least at all gaps. The cut-in and cut-out maneuvers had only a marginal effect on fuel consumption even when repeated every two miles. The presence of passenger-vehicle traffic had a measurable impact. The fuel-consumption savings on the curves was less than on the straight sections.

Light Truck Characteristics, Historical Data Base

Science.gov (United States)

1980-11-01

The report is a description of the data about the physical, operating performance, and market characteristics of light trucks for the model years 1955 through 1977, which is stored on tape in DOT/TSC DEC System 10 computer system. Vehicles are report...

Increasing the impact of a Master’s programme on teacher leadership and school development by means of boundary crossing

NARCIS (Netherlands)

Snoek, Marco; Enthoven, Mascha; Kessels, Joseph; Volman, Monique

2017-01-01

In this case study, we investigate how the development and impact of teacher leadership through a Master’s programme can be supported by a design that encourages boundary crossing activities between schools and universities. The case study focuses on 42 experienced teachers from three vocational

Nuclear power plant containment metallic pressure boundary materials and plans for collecting and presenting their properties

International Nuclear Information System (INIS)

Oland, C.B.

1995-04-01

A program is being conducted at the Oak Ridge National Laboratory (ORNL to assist the Nuclear Regulatory Commission (NRC)) in their assessment of the effects of degradation (primarily corrosion) on the structural capacity and leaktight integrity of metal containments and steel liners of reinforced concrete structures in nuclear power plants. One of the program objectives is to characterize and quantify manifestations of corrosion on the properties of steels used to construct containment pressure boundary components. This report describes a plan for use in collecting and presenting data and information on ferrous alloys permitted for use in construction of pressure retaining components in concrete and metal containments. Discussions about various degradation mechanisms that could potentially affect the mechanical properties of these materials are also included. Conclusions and recommendations presented in this report will be used to guide the collection of data and information that will be used to prepare a material properties data base for containment steels

Idling Reduction for Long-Haul Trucks: An Economic Comparison of On-Board and Wayside Technologies

Energy Technology Data Exchange (ETDEWEB)

Gaines, Linda [Argonne National Lab. (ANL), Argonne, IL (United States); Weikersheimer, Patricia [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-09-01

Reducing the idling of long-haul heavy-duty trucks has long been recognized as a particularly low-hanging fruit of fuel efficiency and emissions reduction. The displacement of about 10 hours of diesel idling every day, for most days of the year, for as many as a million long-haul trucks has very clear benefits. This report considers the costs and return on investment (ROI) for idling reduction (IR) equipment for both truck owners and electrified parking space (EPS) equipment owners. For the truck owners, the key variables examined are idling hours to be displaced (generally 1,000 to 2,000 hours per year) and the price of fuel ($0 to $5/gal). The ideal IR option would provide complete services in varied climates in any location and offer the best ROI on trucks that log many idling hours. For trucks that have fewer idling hours, options with a fixed cost per hour (i.e., EPS) might be most attractive if they were available to all, or even most, truck drivers. EPS, however, is particularly cost effective for trucks on prescribed routes with a need for regular, extended stops at terminals. (EPS is also called truck stop electrification, or TSE.) The analysis shows that all IR options save money when fuel costs more than $2/gal. For trucks requiring bunk heat, a simple heater (plug-in or diesel) is almost always the most costeffective way to provide heat, even if the truck is equipped with an auxiliary power unit (APU) or is parked at a single-system EPS location. For trucks requiring bunk air-conditioning, the use of single-system EPS is most cost effective for those logging fewer idling hours. Even for trucks with higher idling hours, the cost of EPS may be about the same as that for on-board air-conditioning. Clearly, trucks’ locations and seasonal factors—and the availability of EPS— are significant in the choice of “best fit” IR equipment for truck owners. This report also considers costs and payback for owners of EPS infrastructure. An industry that 5

Study on heavy duty truck stability control by braking force control; Seidoryoku seigyo ni yoru truck no sharyo kyodo anteika ni taisuru ichikosatsu

Energy Technology Data Exchange (ETDEWEB)

Matsuda, K; Shinjo, H; Harada, M; Ohata, K; Sakata, K [Mitsubishi Motors Corp., Tokyo (Japan)

1997-10-01

Now a days we are discussing about the vehicle stability control system which freely controls the braking force of each wheel to apply the yaw t and decelerate the vehicle. The system drastically improve the vehicle cornering performance and stabilize the vehicle behavior in its critical area. This paper discusses a point to notice in case of applying this technique for heavy duty trucks, and describes the possibility of the stabilization for vehicle cornering behavior about heavy duty truck. 3 refs., 10 figs., 2 tabs.

Truck drivers’ perceptions on wearable devices and health promotion: a qualitative study

Directory of Open Access Journals (Sweden)

Rama Greenfield

2016-07-01

Full Text Available Abstract Background Professional truck drivers, as other shift workers, have been identified as a high-risk group for various health conditions including cardiovascular disease, obesity, diabetes, sleep apnoea and stress. Mobile health technologies can potentially improve the health and wellbeing of people with a sedentary lifestyle such as truck drivers. Yet, only a few studies on health promotion interventions related to mobile health technologies for truck drivers have been conducted. We aimed to explore professional truck drivers’ views on health promotion delivered via mobile health technologies such as wearable devices. Methods We conducted a phenomenological qualitative study, consisting of four semi-structured focus groups with 34 full-time professional truck drivers in the UK. The focus groups were audio-taped, transcribed verbatim and analysed using thematic content analysis. We discussed drivers’ perceptions of their health, lifestyle and work environment, and their past experience and expectations from mobile health technologies. Results The participants viewed their lifestyle as unhealthy and were aware of possible consequences. They expressed the need and wish to change their lifestyle, yet perceived it as an inherent, unavoidable outcome of their occupation. Current health improvement initiatives were not always aligned with their working conditions. The participants were generally willing to use mobile health technologies such as wearable devices, as a preventive measure to avoid prospect morbidity, particularly cardiovascular diseases. They were ambivalent about privacy and the risk of their employer’s monitoring their clinical data. Conclusions Wearable devices may offer new possibilities for improving the health and wellbeing of truck drivers. Drivers were aware of their unhealthy lifestyle. They were interested in changing their lifestyle and health. Drivers raised concerns regarding being continuously monitored by

Modeling mechanical restriction differences between car and heavy truck in two-lane cellular automata traffic flow model

Science.gov (United States)

Li, Xin; Li, Xingang; Xiao, Yao; Jia, Bin

2016-06-01

Real traffic is heterogeneous with car and truck. Due to mechanical restrictions, the car and the truck have different limited deceleration capabilities, which are important factors in safety driving. This paper extends the single lane safety driving (SD) model with limited deceleration capability to two-lane SD model, in which car-truck heterogeneous traffic is considered. A car has a larger limited deceleration capability while a heavy truck has a smaller limited deceleration capability as a result of loaded goods. Then the safety driving conditions are different as the types of the following and the leading vehicles vary. In order to eliminate the well-known plug in heterogeneous two-lane traffic, it is assumed that heavy truck has active deceleration behavior when the heavy truck perceives the forming plug. The lane-changing decisions are also determined by the safety driving conditions. The fundamental diagram, spatiotemporal diagram, and lane-changing frequency were investigated to show the effect of mechanical restriction on heterogeneous traffic flow. It was shown that there would be still three traffic phases in heterogeneous traffic condition; the active deceleration of the heavy truck could well eliminate the plug; the lane-changing frequency was low in synchronized flow; the flow and velocity would decrease as the proportion of heavy truck grows or the limited deceleration capability of heavy truck drops; and the flow could be improved with lane control measures.

Inverse eigenvalue problems for Sturm-Liouville equations with spectral parameter linearly contained in one of the boundary conditions

OpenAIRE

Guliyev, Namig J.

2008-01-01

International audience; Inverse problems of recovering the coefficients of Sturm–Liouville problems with the eigenvalue parameter linearly contained in one of the boundary conditions are studied: 1) from the sequences of eigenvalues and norming constants; 2) from two spectra. Necessary and sufficient conditions for the solvability of these inverse problems are obtained.

Structural evaluation for the core sampling trucks, RMCS operations, 200 Area

International Nuclear Information System (INIS)

Islam, M.A.

1996-01-01

This report evaluates the structural adequacy and the integrity of the existing core sampling trucks to withstand impact should the trucks drop off the ramp, either onto the soft ground or onto a non-yielding surface due to operational error, wind, or earthquake. The report also addresses if the allowable tank dome load will be exceeded by the addition of the impact load

Prevalence and correlates of poor sleep quality and daytime sleepiness in Belgian truck drivers.

Science.gov (United States)

Braeckman, Lutgart; Verpraet, Rini; Van Risseghem, Marleen; Pevernagie, Dirk; De Bacquer, Dirk

2011-03-01

Sleepiness and sleep complaints are common among professional drivers. Sleepiness is a considerable problem not only because it affects the drivers' well-being, but also because of the consequences for performance and safety. Assessment of the (self-reported) prevalence and research into the risk factors are thus an important health issue and are also indispensable to prevent productivity loss and work-related accidents and injuries. Therefore, the aim of this study was to describe sleeping, driving, and health characteristics of Belgian truck drivers and to determine occupational and individual factors associated with poor sleep quality and daytime sleepiness. Cross-sectional data were collected using a self-administered questionnaire that included the Pittsburgh Sleep Quality Index (PSQI), Epworth Sleepiness Scale (ESS), and Berlin Questionnaire (BQ). The mean (SD) age of the 476 studied truck drivers was 42.7 (10.2) yrs and the mean (SD) body mass index was 27.3 (5.1) kg/m(2). Approximately 47% declared that they drove >50 h/wk and found their work schedule unrealistic. The mean (SD) PSQI score was 4.45 (2.7); poor quality of sleep (PSQI >5) was found in 27.2%. The mean (SD) ESS score was 6.79 (4.17); 18% had a score >10. The BQ indicated that 21.5% had a higher risk on obstructive sleep apnea. In multiple logistic regression analysis, low educational level (odds ratio [OR] 1.86), current smoking (OR 1.75), unrealistic work schedule (OR 1.75), and risk for obstructive sleep apnea (OR 2.97) were found to be independent correlates of daytime sleepiness. Poor sleep quality was significantly associated with poor self-perceived health (OR 1.95), unrealistic work schedule (OR 2.85), low job satisfaction (OR 1.91), and less driving experience (OR 1.73). These results show that poor sleep quality and daytime sleepiness were prevalent in Belgian truck drivers. Taking into account that several significant correlates with respect to these sleep problems were identified

Ticketing aggressive cars and trucks (TACT): How does it work on city streets?

Science.gov (United States)

Telford, Russell; Cook, Lawrence J; Olson, Lenora M

2018-02-17

The purpose of this study was to determine the feasibility of modifying the Ticking Aggressive Cars and Trucks (TACT) program, originally designed to work on state highways, within a metropolitan area to reduce unsafe interactions and their related crashes between drivers of large trucks and passenger vehicles. Using crash data, the driving behaviors most commonly associated with large truck and passenger vehicle crashes were identified. A public awareness campaign using media messaging and increased law enforcement was created targeting these associated behaviors. The frequency of these behaviors both before and after the public awareness campaign was determined through observation of traffic at 3 specific locations within the city. Each location had a sufficient volume of large truck and passenger traffic to observe frequent interactions. Pre- and postintervention data were compared using negative binomial regression with generalized estimating equations to evaluate whether the campaign was associated with a reduction in the identified driving behaviors. A comparison between crash data from before, during, and after the campaign and crashes during the same time periods in previous years did not show a significant difference (P =.081). The number of large trucks observed in traffic remained the same during pre- and postintervention periods (P =.625). The rates of negative interactions per 100 large trucks decreased for both large trucks and passenger vehicles after the intervention, with calculated rate ratios of 0.58 (95% confidence interval [CI], 0.48, 0.70) and 0.31 (95% CI, 0.20, 0.47). The greatest reduction was seen in passenger vehicles following too close, with a rate ratio of 0.21 (95% CI, 0.15, 0.30). Although designed for reducing crashes on highways, the TACT program can be an effective approach for improving driver behaviors on city streets.

The effect of the descent technique and truck cabin layout on the landing impact forces.

Science.gov (United States)

Patenaude, S; Marchand, D; Samperi, S; Bélanger, M

2001-12-01

The majority of injuries to truckers are caused by falls during the descent from the cab of the truck. Several studies have shown that the techniques used to descend from the truck and the layout of the truck's cabin are the principal cause of injury. The goal of the present study was to measure the effects of the descent techniques used by the trucker and the layout of the truck's cabin on the impact forces absorbed by the lower limbs and the back. Kinematic data, obtained with the aid of a video camera, were combined with the force platform data to allow for calculation of the lower limb and L5-S1 torques as well as L5-S1 compressive forces. The trucker descended from two different conventional tractor cabin layouts. Each trucker descended from cabin using either "facing the truck" (FT) or "back to the truck" (BT) techniques. The results demonstrate that the BT technique produces greater ground impact forces than the FT technique, particularly when the truck does not have a handrail. The BT technique also causes an increase in the compressive forces exerted on the back. In conclusion, the use of the FT technique along with the aids (i.e., handrails and all the steps) help lower the landing impact forces as well as the lumbosacral compressive forces.

Modelling and control of a light-duty hybrid electric truck

OpenAIRE

Park, Jong-Kyu

2006-01-01

This study is concentrated on modelling and developing the controller for the light-duty hybrid electric truck. The hybrid electric vehicle has advantages in fuel economy. However, there have been relatively few studies on commercial HEVs, whilst a considerable number of studies on the hybrid electric system have been conducted in the field of passenger cars. So the current status and the methodologies to develop the LD hybrid electric truck model have been studied through the ...

Understanding commercial truck drivers' decision-makin process concerning distracted driving.

Science.gov (United States)

Swedler, David I; Pollack, Keshia M; Gielen, Andrea C

2015-05-01

A concurrent mixed methods design was used to explore personal and workplace factors, informed by the Theory of Planned Behavior, that affect truck drivers' decision-making about distracted driving on the job. Qualitative data were collected via semi-structured interviews with experts in truck safety and distracted driving, and quantitative data were collected via online survey of truck drivers in the United States. Findings from the interviews illustrated how drivers perceived distractions and the importance of supervisors enforcing organizational distracted driving policies. Survey results found that behavioral intentions were most important in regards to texting and crash and near-crash outcomes, while perceived norms from management best described the correlation between dispatch device use and negative crash-related outcomes. By using a mixed methods design, rather than two separate studies, these findings revealed nuanced differences into the influence of supervisors on distracted driving. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluating sustainability of truck weight regulations: A system dynamics view

Directory of Open Access Journals (Sweden)

Pei Liu

2015-11-01

Full Text Available Purpose: Targeting the problem of overload trucking in Highway Transportation of iron ore from Caofeidian to Tangshan (HTCT, this paper aims to assess long-term effects of alternative Truck Weight Regulation (TWR policies on sustainability of HTCT. Design/methodology/approach: A system dynamics model was established for policy evaluation. The model, composed of six interrelating modules, is able to simulate policies effects on trucking issues such as freight flow, truck traffic flow, pavement performance, highway transport capacity and trucking time, and further on the Cumulative Economic Cost (CEC including transport cost and time cost of freight owners and the Cumulative Social Cost (CSC including pavement maintenance cost, green house gas emission cost, air pollutants emission cost and traffic accidents cost, so the effects of TWR policies on sustainability of HTCT could be evaluated. Findings: According to different values of overload ratio which a TWR policy allows, alternative TWR policies are classified into three types, which are The Rigid Policy (TRP, The Moderate Policy (TMP and The Tolerant Policy (TTP. Results show that the best policy for sustainability of HTCT depends on the importance of CSC which is expected by the local government. To be specific, (1 if CSC is considered much less important than CEC, the local government should continue implementing the current TTP with the maximum overload ratio; (2 if CSC is considered much more important than CEC, then TRP is recommended; and (3 if CSC is considered slightly more important than CES, TMP with overload ratio of 80% is the best. Practical implications: Conclusions of this paper may help the local government design appropriate TWR policies to achieve sustainability of HTCT. Originality/value: To the best of our knowledge, this is the first effort to evaluate TWR policies on sustainability of regional freight transportation based on system dynamics modeling.

CAFE compliance by light trucks: economic impacts of clean diesel engine

International Nuclear Information System (INIS)

Teotia, A.; Vyas, A.; Cuenca, R.; Stodolsky, F.

1999-01-01

With the popularity of light trucks increasing in the United States, their share of the US light vehicle market had doubled between 1980 and 1996, climbing from 20 to 40%. By 1996, annual energy consumption for light trucks had risen to 5.97 x 10 15 Btu [5.97 quadrillion Btu, or ''quad'', or 6.30 x 10 18 joule (J)], compared to 7.94 quad (8.38 x 10 18 J) for cars. In recent years (since 1995), the fuel economy of US-manufactured light trucks (almost 99% of which use gasoline engines) has been below the Corporate Average Fuel Economy (CAFE) standards. This paper analyzes a strategy to reduce the CAFE shortfalls by adopting the new, highly energy-efficient clean diesel engine. Research on such engines has been funded by the US Department of Energy, Office of Heavy Vehicle Technologies, under its Light Truck Clean Diesel Engine Program. A clean diesel engine market penetration trajectory is developed, representing an industry response to meet the CAFE standards. Whether the engine will be produced inside the country or imported remains uncertain, so two cases are defined. Values of exports/imports of clean diesel engines/trucks under these cases are estimated. The macroeconomic benefits are estimated by using a model of the US economy developed by Standard and Poor's Data Resources, Inc. On the basis of gains in the gross domestic product projected under the alternative cases, domestic production of the clean diesel engine is favored over importing it. (author)

Legal weight truck cask model impact limiter response

International Nuclear Information System (INIS)

Meinert, N.M.; Shappert, L.B.

1989-01-01

Dynamic and quasi-static quarter-scale model testing was performed to supplement the analytical case presented in the Nuclear Assurance Corporation Legal Weight Truck (NAC LWT) cask transport licensing application. Four successive drop tests from 9.0 meters (30 feet) onto an unyielding surface and one 1.0-meter (40-inch) drop onto a scale mild steel pin 3.8 centimeters (1.5 inches) in diameter, corroborated the impact limiter design and structural analyses presented in the licensing application. Quantitative measurements, made during drop testing, support the impact limiter analyses. High-speed photography of the tests confirm that only a small amount of energy is elastically stored in the aluminum honeycomb and that oblique drop slapdown is not significant. The qualitative conclusion is that the limiter protected LWT cask will not sustain permanent structural damage and containment will be maintained, subsequent to a hypothetical accident, as shown by structural analyses

Stress analysis of jacks, frame and bearing connections, and drill rod for core sampler truck No. 2

International Nuclear Information System (INIS)

Ziada, H.H.

1995-01-01

This analysis evaluates the structural design adequacy of several components and connections for the rotary mode core sampler truck (RMCST) No. 2. This analysis was requested by the Characterization Equipment Group (WHC 1994a). The components addressed in this report are listed below: front jack assembly and connection to the truck chassis; rear jack assembly and connection to the truck chassis; center outrigger jacks and connection to the truck chassis; lower frame assembly and connection to the truck chassis; bolt connections for bearing plate assembly (for path of maximum load); traverse slide brackets and mounting of the traverse jack cylinders; and drill rod (failure loads)

NIOSH national survey of long-haul truck drivers: Injury and safety

Science.gov (United States)

Chen, Guang X.; Sieber, W. Karl; Lincoln, Jennifer E.; Birdsey, Jan; Hitchcock, Edward M.; Nakata, Akinori; Robinson, Cynthia F.; Collins, James W.; Sweeney, Marie H.

2015-01-01

Approximately 1,701,500 people were employed as heavy and tractor-trailer truck drivers in the United States in 2012. The majority of them were long-haul truck drivers (LHTDs). There are limited data on occupational injury and safety in LHTDs, which prompted a targeted national survey. The National Institute of Occupational Safety and Health conducted a nationally representative survey of 1265 LHTDs at 32 truck stops across the contiguous United States in 2010. Data were collected on truck crashes, near misses, moving violations, work-related injuries, work environment, safety climate, driver training, job satisfaction, and driving behaviors. Results suggested that an estimated 2.6% of LHTDs reported a truck crash in 2010, 35% reported at least one crash while working as an LHTD, 24% reported at least one near miss in the previous 7 days, 17% reported at least one moving violation ticket and 4.7% reported a non-crash injury involving days away from work in the previous 12 months. The majority (68%) of non-crash injuries among company drivers were not reported to employers. An estimate of 73% of LHTDs (16% often and 58% sometimes) perceived their delivery schedules unrealistically tight; 24% often continued driving despite fatigue, bad weather, or heavy traffic because they needed to deliver or pick up a load at a given time; 4.5% often drove 10 miles per hours or more over the speed limit; 6.0% never wore a seatbelt; 36% were often frustrated by other drivers on the road; 35% often had to wait for access to a loading dock; 37% reported being noncompliant with hours-of-service rules (10% often and 27% sometimes); 38% of LHTDs perceived their entry-level training inadequate; and 15% did not feel that safety of workers was a high priority with their management. This survey brings to light a number of important safety issues for further research and interventions, e.g., high prevalence of truck crashes, injury underreporting, unrealistically tight delivery schedules

Effects of Self-Efficacy on Healthy Eating Depends on Normative Support: a Prospective Study of Long-Haul Truck Drivers.

Science.gov (United States)

Hamilton, Kyra; Hagger, Martin S

2018-04-01

Fruit and vegetable intake (FV) is insufficient in industrialized nations and there is excess of discretionary food choices (DC; foods high in fat, sugar, and salt). Long-haul truck drivers are considered a particularly at-risk group given the limited food choices and normatively reinforced eating habits at truck rest-stops. Self-efficacy and normative support are key determinants of eating behavior yet the processes underlying their effects on behavior are not well understood. We tested the direct and interactive effects of self-efficacy and normative support on healthy eating behaviors in long-haul truck drivers in a prospective correlational study. Long-haul truck drivers (N = 82) completed an initial survey containing self-report measures of behavioral intentions, perceived normative support, and self-efficacy for their FV and DC behaviors. Participants completed a follow-up survey 1 week later in which they self-reported their FV and DC behavior. A mediated moderation analysis identified an interactive effect of self-efficacy and normative support on behavior mediated by intention for FV and DC behavior. Specifically, we confirmed a compensation effect in which self-efficacy was more likely to have an effect on FV and DC behavior through intentions in participants with low normative support. Results indicate the importance of self-efficacy in predicting FV and DC intentions and behavior in the absence of a supportive normative environment. The compensatory effect of self-efficacy beliefs on behavior through intentions when normative support is low should be confirmed using experimental methods.

Presenting a conceptual pattern of HSE performance of oil trucks.

Science.gov (United States)

Ghaleh, Sahar; Omidvari, Manouchehr; Nassiri, Parvin; Momeni, Mansour; Lavasani, Seyed Mohammadreza Miri

2018-01-25

Accidents are among the main problems in the oil product supply chain. The most important effective factors in these events are the kind of trucks used and their health, safety, and environment (HSE) condition. The aim of this study was to present a conceptual pattern of the HSE performance of oil trucks in oil industries. In this study, 20 truck models (with fixed tanks), in use over different periods of time, were investigated. In this regard, the criteria and sub-criteria were first determined in two parts-carrier and tank-and weighted by fuzzy analytical hierarchy process (FAHP). The results showed that the most important sub-criteria regarding the HSE factors of the carrier were resistance and strength of the front and rear shields, the brake system, and the ventilation system. The most important sub-criteria regarding the HSE factors of the tank were tank shell thickness and a good tank design shape with respect to portable material. It should be noted that the weight of the criteria with each other and sub-criteria with each other are not equal. This issue is important for decision-making. The main reason for the use of trucks with the lowest score in developing countries is the lack of attention by managers to safety issues and international standards and agreements such as the ADR.

Transport package response to severe thermal events, part 2: legal weight truck cask

International Nuclear Information System (INIS)

Greiner, M.; Faulkner, R.J.; Jin, Y.Y.

1998-01-01

The response of intact and damaged versions of the GA-4 Legal Weight Truck Cask to a range of severe thermal events is simulated using finite element computer analysis. The minimum fire durations that cause the containment seals and fuel cladding to reach their respective temperature limits are evaluated for a range of hydrocarbon fire temperatures. Containment seals reach their temperature limit in shorter duration fires as compared to the cladding, for both an undamaged package and a cask whose impact limiter is destroyed moments before the fire begins. However, if the neutron shield is destroyed, the cladding reaches its limit first in high temperature fires. A margin of safety exists between the conditions of the IAEA regulatory fire test and all of the performance envelopes calculated in this work. (author)

Crossing the Cultural Boundary from Home to Kindergarten in Hong Kong: A Case Study of a Child's Strategic Actions

Science.gov (United States)

Lam, Mei Seung

2009-01-01

Transition from home to kindergarten is the first and major ecological transition in children's educational lives in Hong Kong. In this transition, children cross a cultural boundary from home to kindergarten and start to learn about "school" as a place to learn and about themselves as "pupils" in kindergarten. The conceptual…

Assessing Potential Exposure from Truck Transport of Low-level Radioactive Waste to the Nevada Test Site

International Nuclear Information System (INIS)

Miller, J.; Shafer, D.; Gray, K.; Church, B.; Campbell, S.; Holz, B.

2005-01-01

This study has shown that, based upon measurements from industry standard radiation detection instruments, such as the RS model RSS-131 PICs in a controlled configuration, a person may be exposed to gamma radiation above background when in close proximity to some LLW trucks. However, in approximately half (47.7 percent) the population of trucks measured in this study, a person would receive no exposure above background at a distance of 1.0 m (3.3 ft) away from a LLW truck. An additional 206 trucks had net exposures greater than zero, but equal to or less than 1 (micro)R/h. Finally, nearly 80 percent of the population of trucks (802 of 1,012) had net exposures less than or equal to 10 (micro)R/h. Although there are no shipping or exposure standards at 1.0 m (3.3 ft) distance, one relevant point of comparison is the DOT shipping standard of 10 mrem/h at 2.0 m (6.6 ft) distance. Assuming a one-to-one correspondence between Roentgens and Rems, then 903 trucks (89.2 percent of the trucks measured) were no greater than one percent of the DOT standard at 1.0 m (3.3 ft). Had the distance at which the trucks been measured increased to 2.0 m (6.6 ft), the net exposure would be even less because of the increase in distance between the truck and the receptor. However, based on the empirical data from this study, the rate of decrease may be slower than for either a point or line source as was done for previous studies (Gertz, 2001; Davis et al., 2001). The highest net exposure value at 1.0 m (3.3 ft) distance, 11.9 mR/h, came from the only truck with a value greater than 10 mR/h at 1.0 m (3.3 ft) distance

Commercial truck crash injury severity analysis using gradient boosting data mining model.

Science.gov (United States)

Zheng, Zijian; Lu, Pan; Lantz, Brenda

2018-06-01

Truck crashes contribute to a large number of injuries and fatalities. This study seeks to identify the contributing factors affecting truck crash severity using 2010 to 2016 North Dakota and Colorado crash data provided by the Federal Motor Carrier Safety Administration. To fulfill a gap of previous studies, broad considerations of company and driver characteristics, such as company size and driver's license class, along with vehicle types and crash characteristics are researched. Gradient boosting, a data mining technique, is applied to comprehensively analyze the relationship between crash severities and a set of heterogeneous risk factors. Twenty five variables were tested and 22 of them are identified as significant variables contributing to injury severities, however, top 11 variables account for more than 80% of injury forecasting. The relative variable importance analysis is conducted and furthermore marginal effects of all contributing factors are also illustrated in this research. Several factors such as trucking company attributes (e.g., company size), safety inspection values, trucking company commerce status (e.g., interstate or intrastate), time of day, driver's age, first harmful events, and registration condition are found to be significantly associated with crash injury severity. Even though most of the identified contributing factors are significant for all four levels of crash severity, their relative importance and marginal effect are all different. For the first time, trucking company and driver characteristics are proved to have significant impact on truck crash injury severity. Some of the results in this study reinforce previous studies' conclusions. Findings in this study can be helpful for transportation agencies to reduce injury severity, and develop efficient strategies to improve safety. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

A Comparative Study of Back Pain among Taxi and Truck Drivers in ...

African Journals Online (AJOL)

Data was analyzed using SSPSS version 20. Descriptive and analytical statistics to analyze and present data. The prevalence of back pain in Port Harcourt for taxi drivers was 70.4% and 71.4% for truck drivers. The prevalence among truck drivers was due to age ,sitting position and shock absorbers. However variables like ...

A comprehensive analysis of factors influencing the injury severity of large-truck crashes.

Science.gov (United States)

Zhu, Xiaoyu; Srinivasan, Sivaramakrishnan

2011-01-01

Given the importance of trucking to the economic well being of a country and the safety concerns posed by the trucks, a study of large-truck crashes is critical. This paper contributes by undertaking an extensive analysis of the empirical factors affecting injury severity of large-truck crashes. Data from a recent, nationally representative sample of large-truck crashes are examined to determine the factors affecting the overall injury severity of these crashes. The explanatory factors include the characteristics of the crash, vehicle(s), and the driver(s). The injury severity was modeled using two measures. Several similarities and some differences were observed across the two models which underscore the need for improved accuracy in the assessment of injury severity of crashes. The estimated models capture the marginal effects of a variety of explanatory factors simultaneously. In particular, the models indicate the impacts of several driver behavior variables on the severity of the crashes, after controlling for a variety of other factors. For example, driver distraction (truck drivers), alcohol use (car drivers), and emotional factors (car drivers) are found to be associated with higher severity crashes. A further interesting finding is the strong statistical significance of several dummy variables that indicate missing data - these reflect how the nature of the crash itself could affect the completeness of the data. Future efforts should seek to collect such data more comprehensively so that the true effects of these aspects on the crash severity can be determined. Copyright © 2010 Elsevier Ltd. All rights reserved.

The impacts of multiple rest-break periods on commercial truck driver's crash risk.

Science.gov (United States)

Chen, Chen; Xie, Yuanchang

2014-02-01

Driver fatigue has been a major contributing factor to fatal commercial truck crashes, which accounted for about 10% of all fatal motor vehicle crashes that happened between 2009 and 2011. Commercial truck drivers' safety performance can deteriorate easily due to fatigue caused by long driving hours and irregular working schedules. To ensure safety, truck drivers often use off-duty time and short rest breaks during a trip to recover from fatigue. This study thoroughly investigates the impacts of off-duty time prior to a trip and short rest breaks on commercial truck safety by using Cox proportional hazards model and Andersen-Gill model. It is found that increasing total rest-break duration can consistently reduce fatigue-related crash risk. Similarly, taking more rest breaks can help to reduce crash risk. The results suggest that two rest breaks are generally considered enough for a 10-hour trip, as three or more rest breaks may not further reduce crash risk substantially. Also, the length of each rest break does not need to be very long and 30min is usually adequate. In addition, this study investigates the safety impacts of when to take rest breaks. It is found that taking rest breaks too soon after a trip starts will cause the rest breaks to be less effective. The findings of this research can help policy makers and trucking companies better understand the impacts of multiple rest-break periods and develop more effective rules to improve the safety of truck drivers. Copyright © 2014 Elsevier Ltd and National Safety Council. All rights reserved.

Operability test report for core sample truck number one flammable gas modifications

International Nuclear Information System (INIS)

Akers, J.C.

1997-01-01

This report primarily consists of the original test procedure used for the Operability Testing of the flammable gas modifications to Core Sample Truck No. One. Included are exceptions, resolutions, comments, and test results. This report consists of the original, completed, test procedure used for the Operability Testing of the flammable gas modifications to the Push Mode Core Sample Truck No. 1. Prior to the Acceptance/Operability test the truck No. 1 operations procedure (TO-080-503) was revised to be more consistent with the other core sample truck procedures and to include operational steps/instructions for the SR weather cover pressurization system. A draft copy of the operations procedure was used to perform the Operability Test Procedure (OTP). A Document Acceptance Review Form is included with this report (last page) indicating the draft status of the operations procedure during the OTP. During the OTP 11 test exceptions were encountered. Of these exceptions four were determined to affect Acceptance Criteria as listed in the OTP, Section 4.7 ACCEPTANCE CRITERIA

Alternative-fueled truck demonstration natural gas program: Caterpillar G3406LE development and demonstration

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

In 1990, the California Energy Commission, the South Coast Air Quality Management District, and the Southern California Gas Company joined together to sponsor the development and demonstration of compressed natural gas engines for Class 8 heavy-duty line-haul trucking applications. This program became part of an overall Alternative-Fueled Truck Demonstration Program, with the goal of advancing the technological development of alternative-fueled engines. The demonstration showed natural gas to be a technically viable fuel for Class 8 truck engines.

Safety climate and the distracted driving experiences of truck drivers.

Science.gov (United States)

Swedler, David I; Pollack, Keshia M; Agnew, Jacqueline

2015-07-01

For truck drivers, distracted driving is a workplace behavior that increases occupational injury risk. We propose safety climate as an appropriate lens through which researchers can examine occupational distracted driving. Using a mixed methods study design, we surveyed truck drivers using the Safety Climate Questionnaire (SCQ) complemented by semi-structured interviews of experts on distracted driving and truck safety. Safety climate was assessed by using the entire SCQ as an overall climate score, followed by factor analysis that identified the following safety climate factors: Communications and Procedures; Management Commitment; and Work Pressure. In multivariate regression, the overall safety climate scale was associated with having ever experienced a crash and/or distraction-involved swerving. Interview participants described how these SCQ constructs could affect occupational distracted driving. To reduce distraction-related crashes in their organizations, management can adhere to safe policies and procedures, invest in engineering controls, and develop safer communication procedures. © 2015 Wiley Periodicals, Inc.

Phonon cross-plane transport and thermal boundary resistance: effect of heat source size and thermal boundary resistance on phonon characteristics

Science.gov (United States)

Ali, H.; Yilbas, B. S.

2016-09-01

Phonon cross-plane transport across silicon and diamond thin films pair is considered, and thermal boundary resistance across the films pair interface is examined incorporating the cut-off mismatch and diffusive mismatch models. In the cut-off mismatch model, phonon frequency mismatch for each acoustic branch is incorporated across the interface of the silicon and diamond films pair in line with the dispersion relations of both films. The frequency-dependent and transient solution of the Boltzmann transport equation is presented, and the equilibrium phonon intensity ratios at the silicon and diamond film edges are predicted across the interface for each phonon acoustic branch. Temperature disturbance across the edges of the films pair is incorporated to assess the phonon transport characteristics due to cut-off and diffusive mismatch models across the interface. The effect of heat source size, which is allocated at high-temperature (301 K) edge of the silicon film, on the phonon transport characteristics at the films pair interface is also investigated. It is found that cut-off mismatch model predicts higher values of the thermal boundary resistance across the films pair interface as compared to that of the diffusive mismatch model. The ratio of equilibrium phonon intensity due to the cut-off mismatch over the diffusive mismatch models remains >1 at the silicon edge, while it becomes <1 at the diamond edge for all acoustic branches.

Locomotor diseases among male long-haul truck drivers and other professional drivers

DEFF Research Database (Denmark)

Jensen, Anker; Kaerlev, Linda; Tüchsen, Finn

2007-01-01

-249) and for other truck drivers (SHR: 130, 95% CI: 108-156) compared to bus drivers (SHR: 110, 95% CI: 79-149). All drivers had high SHR for lesions of the ulnar nerve (SHR: 159, 95% CI: 119-207), especially bus drivers (SHR: 197, 95% CI: 116-311). Long-haul truck drivers had high SHRs for synovitis and bursitis...

Optimization of a truck-drone in tandem delivery network using k-means and genetic algorithm

Energy Technology Data Exchange (ETDEWEB)

Ferrandez, S. M.; Harbison, T.; Weber, T.; Sturges, R.; Rich, R.

2016-07-01

The purpose of this paper is to investigate the effectiveness of implementing unmanned aerial delivery vehicles in delivery networks. We investigate the notion of the reduced overall delivery time, energy, and costs for a truck-drone network by comparing the in-tandem system with a stand-alone delivery effort. The objectives are (1) to investigate the time, energy, and costs associated to a truck-drone delivery network compared to standalone truck or drone, (2) to propose an optimization algorithm that determines the optimal number of launch sites and locations given delivery requirements, and drones per truck, (3) to develop mathematical formulations for closed form estimations for the optimal number of launch locations, optimal total time, as well as the associated cost for the system. The design of the algorithm herein computes the minimal time of delivery utilizing K-means clustering to find launch locations, as well as a genetic algorithm to solve the truck route as a traveling salesmen problem (TSP). The optimal solution is determined by finding the minimum cost associated to the parabolic convex cost function. The optimal min-cost is determined by finding the most efficient launch locations using K-means algorithms to determine launch locations and a genetic algorithm to determine truck route between those launch locations. Results show improvements with in-tandem delivery efforts as opposed to standalone systems. Further, multiple drones per truck are more optimal and contribute to savings in both energy and time. For this, we sampled various initialization variables to derive closed form mathematical solutions for the problem. Ultimately, this provides the necessary analysis of an integrated truck-drone delivery system which could be implemented by a company in order to maximize deliveries while minimizing time and energy. Closed-form mathematical solutions can be used as close estimators for final costs and time. (Author)

Modelling Truck Weigh Stations’ Locations based on Truck Traffic Flow and Overweight Violation: A Case Study in Bosnia and Herzegovina

Directory of Open Access Journals (Sweden)

Mirsad Kulović

2018-04-01

Full Text Available The number of registered commercial freight vehicles is constantly increasing, increasing therefore as well the traffic load on the roads in Bosnia and Herzegovina. A significant part of freight vehicles moving along the main and regional roads are overloaded and cause significant damage to road infrastructure, affect road safety and result in an increase of emissions of harmful gases for people and the environment. The overloading rate is extremely high, in particular with 5-axle trucks representing 58.7%. The research showed that the increased overload level ranges from 10-20% of the maximum permissible weight. The importance of load limits was recognized early in the history of road development. This interrelation led directly to limitations on vehicle loads, and laws were enacted in many countries to establish the maximum allowable motor vehicle sizes and weights. Strict enforcement of motor vehicle size and weight laws is a step toward reducing motor vehicle size and weight violations, heavy truck accidents, and, even more, improving road maintenance, rehabilitation expenditures and road safety. Thus, based on the applied model the objective of this paper is to evaluate and optimize the locations of truck weigh stations on the road network of Bosnia and Herzegovina.

Shipping container response to severe highway and railway accident conditions: Appendices

International Nuclear Information System (INIS)

Fischer, L.E.; Chou, C.K.; Gerhard, M.A.; Kimura, C.Y.; Martin, R.W.; Mensing, R.W.; Mount, M.E.; Witte, M.C.

1987-02-01

Volume 2 contains the following appendices: Severe accident data; truck accident data; railroad accident data; highway survey data and bridge column properties; structural analysis; thermal analysis; probability estimation techniques; and benchmarking for computer codes used in impact analysis. (LN)

77 FR 20480 - Volvo Trucks North America and Mack Trucks, Inc., Grant of Petition for Decision of...

Science.gov (United States)

2012-04-04

... GU model trucks that were built with certain Meritor WABCO Vehicle Control Systems (Meritor WABCO... equipment requirements for motor vehicles equipped with air brake systems. Paragraph S5.3.4.1(a) of FMVSS No... vehicle's braking performance. The tests and analyses were performed by an independent test lab, Link...

Radiation risk assessment for the transport of radioisotopes using KRI-BGM B(U) type container

International Nuclear Information System (INIS)

Cho, Woon-Kap

2008-01-01

The radiation risks were estimated for the transportation of radioisotopes using KRI-BGM transport container. KRI-BGM container was specially designed for transportation of large amount of radioisotopes for industrial or medical applications. The container can carry maximum 370 TBq of solid Ir-192, 29.6 TBq of liquid Mo-99 and 37 TBq of liquid I-131 respectively. For the radiation risk assessment, it was assumed that maximum design activity of those radioisotopes was transported. Transportation route is from Daejeon where radioisotopes are produced to Seoul where radioisotopes are consumed. Transport distance is 200 km including highway and downtown area from Daejeon to Seoul. As the transportation conveyance, an ordinary cargo truck is used exclusively. Radiation risks were estimated for incident free and accident condition of transportation and RADTRAN 5.6 was used as the risk assessment tool. For the risk assessment of radioisotopes transportation, various parameters such as population density around transport route, weather condition, probability of specific accidents such as impact, fire, etc. were considered. From the results of this study, the exclusive transportation of radioisotopes using KRI-BGM transport container by truck showed low radiological risks with manageable safety and health consequences. This paper discusses the methods and results of the radiation risks assessment for the radioisotopes transportation by an ordinary truck and presents the expected radiation risks in person-Sv and latent cancer fatalities. (author)

Effect of Uphill Flexible Pavements on The Damaging Effect Of Full-Trailer Trucks With Tandem Front Axles

Directory of Open Access Journals (Sweden)

Sabah Said Razouki

2017-08-01

Full Text Available The effect of traffic on flexible pavements can be expressed in terms of truck equivalence factors. This paper presents a study on the effect of uphill pavements on the damaging effect (truck equivalence factors of two types of full-trailer trucks with tandem front axles. Axle load and geometrical characteristics survey on the two types of full-trailer trucks were carried out for determining the data needed in this study. In addition, uphill slope survey in Kerbala city was done and the data of uphill slope of other Iraqi cities were obtained from previous surveys. The paper reveals that the uphill pavement gradient causes significant increase in truck equivalence factors. In addition, the research reveals that there are many factors affecting the truck equivalence factors on uphill flexible pavements, including the total weight of full-trailer, H/B ratio (height of center of gravity to the wheel base of the truck, magnitude of uphill slope, and the structural number (SN.This work shows the importance of considering the effect of uphill slope in the design of flexible pavements on steep uphill slopes.

Customer expectations and current offers from food trucks in Helsinki

OpenAIRE

Nguyen, An

2017-01-01

The aim of this thesis is to determine whether there is a gap between what customers expect and what the food trucks in Helsinki offers in term of diversity of products, price, time and location of service. Do the current offers match with what customers would like to have? The food truck concept has a long history and since 2008 became an international phenomenon. However, it is still relatively young in Helsinki. There are concerted efforts from different parties included the city’s au...

Food truck som ett nytt fenomen i Skåne

OpenAIRE

Fromell, Hilda; Winter, Regina

2016-01-01

Food truck is a mobile restaurant business which originates from the United States, and can now be seen also in Sweden. There are specific guidelines regarding the food that are served from the food trucks rolling the streets of Skåne from 2013. For example the food should be ecological, which is in keeping with the other municipal goals regarding food and meal. The concept is communicated and marketed through social media, which makes it possible to effectively reach many people. Four food t...

Risk of commercial truck fires in the United States : an exploratory data analysis

Science.gov (United States)

2012-06-29

Large trucks are involved in only 8 percent of fatal crashes per year, but 17 percent of fatal fires. The scope of the current body of research is limited. Studies have treated truck fires generally as a subset of vehicle fires or in their own right ...

MeV ion beam interaction with polymer films containing cross-linking agents

International Nuclear Information System (INIS)

Evelyn, A. L.

1999-01-01

Polymer films containing cross linking enhancers were irradiated with MeV alpha particles to determine the effects of MeV ion beam interaction on these materials. The contributed effects from the electronic and nuclear stopping powers were separated by irradiating stacked thin films of polyvinyl chloride (PVC), polystyrene (PS) and polyethersulfone (PES). This layered system allowed most of the effects of the electronic energy deposited to be experienced by the first layers and the last layers to receive most of the effects of the nuclear stopping power. RGA, Raman microprobe analysis, RBS and FTIR measured changes in the chemical structures of the irradiated films. The characterization resolved the effects of the stopping powers on the PVC, PS and PES and the results were compared with those from previously studied polymers that did not contain any cross linking agents

Battery Dimensioning and Life Cycle Costs Analysis for a Heavy-Duty Truck Considering the Requirements of Long-Haul Transportation

Directory of Open Access Journals (Sweden)

Ivan Mareev

2017-12-01

Full Text Available The use of heavy-duty battery electric trucks for long-haul transportation is challenging because of the required high energy amounts and thus the high capacity of traction batteries. Furthermore a high capacity battery implies high initial costs for the electric vehicle. This study investigates the required battery capacity for battery electric trucks considering the requirements of long-haul transportation in Germany and compares the life cycle costs of battery electric trucks and conventional diesel trucks in different transportation scenarios. The average consumption is simulated for different battery electric truck configurations on the main German highways and transportation scenarios incorporating battery charging during driver rest periods. The results show that in average case the required battery would restrict the payload to only 80% of a usual diesel truck payload that might be acceptable considering the statistical payload use. The life cycle costs in the examined scenarios also considering the charging infrastructure show that battery electric trucks can already perform on the same costs level as diesel trucks in certain scenarios.

County and Parish Boundaries - COUNTY_GOVERNMENT_BOUNDARIES_IDHS_IN: Governmental Boundaries Maintained by County Agencies in Indiana (Indiana Department of Homeland Security, Polygon feature class)

Data.gov (United States)

NSGIC State | GIS Inventory — COUNTY_GOVERNMENT_BOUNDARIES_IDHS_IN is a polygon feature class that contains governmental boundaries maintained by county agencies in Indiana, provided by personnel...

Metabolic syndrome among professional bus and truck drivers in Kashan, 2008

Directory of Open Access Journals (Sweden)

Hamidreza Saberi

2009-12-01

Full Text Available Background: The literature data and our own studies show that in drivers of transport vehicles, work-related risk factors for arterial hypertension, ischemic heart disease, and metabolic syndrome are largely intensified. These involve occupational risk factors as well as classic ones, such as obesity, limited physical activity, shift work, or tobacco smoking. However, studies published over the past two decades on the health of bus and truck drivers have received relatively less attention in developing countries. Methods: In a cross-sectional study 429 Kashan City male bus and truck drivers that enter the occupational health service for health examination were enrolled. The study focused on the presence of the metabolic syndrome, as defined by the National Cholesterol Education Program Expert Panel on Detection, Evaluation and Treatment of High Blood Cholesterol in Adults (NCEP ATP III and statistical tests such as t-test, chi-square test and Pearson’s correlation coefficient were used to analyze the data. Results: The prevalence of metabolic syndrome according to ATP-III was 35.9% mostly at age range 30-39 years. The prevalence of overweight was 41% Obesity, 23.1% hypertension, 42.9% Diabetes, 7% hypertriglyceridemia, 53.4% and low HDL cholesterol, 48.7%. In addition, between diabetes and hypertension and between hypertension and smoking meaningful relation was seen (p=0.006. Conclusion: We observed a high prevalence of metabolic syndrome in these groups to be significantly higher than other groups in Iran. So, Occupation must be considered as a risk factor for impaired health status, leading to temporary or permanent disability to work.

Potential Safety Benefit of the Blind Spot Detection System for Large Trucks on the Vulnerable Road Users in Taiwan

Directory of Open Access Journals (Sweden)

Wang Ming-Hang

2016-01-01

Full Text Available Considering motorcyclists, pedestrians and bicyclists as vulnerable road users (VRUs, more than 75 percent of the victims of fatal crashes involving large trucks in Taiwan are VRUs. Most crashes occurred at or were due to the blind spots of large trucks because of the size and traveling locations of the VRUs. This study applies typology and statistical methods to estimate the potential safety benefit of blind spot detection (BSD systems for large trucks on VRUs. The pre-crash scenarios associated with the blind spots of large trucks were derived by counting the maneuvers of large trucks and VRUs, prior to crashes, the truck drivers’ improper behaviors (cause of crashes, and the crash types. The number of crashes and fatalities were counted for the pre-crash scenario relevant to the BSD systems. A value of 0.8 of human machine interface factor (HMIF based on a previous study was applied to estimate the potential safety benefits of the BSD system. The results show that the implementation of BSD systems on all large trucks could help avoid about 24, 10, and 11 percent of large truck-involved crashes with pedestrians, bicycles, and motorcycles, respectively. The BSD systems could also save 5 pedestrians, 3 bicyclists, and 15 motorcyclists per year from crashes involving large trucks.

Research on tractive power of KZC-5 rear dump truck in underground mine

International Nuclear Information System (INIS)

Lei Zeyong

2003-01-01

The tractive power of KZC-5 rear dump truck in underground mine is studied in this paper. The principles and ways of defining the power are discussed. It is proved that the power of KZC-5 rear dump truck in underground mine is reasonable in the industrial scale test

Plug-In Hybrid Medium-Duty Truck Demonstration and Evaluation

Energy Technology Data Exchange (ETDEWEB)

Miyasato, Matt [Electric Power Research Institute (EPRI), Palo Alto, CA (United States); Kosowski, Mark [Electric Power Research Institute (EPRI), Palo Alto, CA (United States)

2015-10-01

The Plug-In Hybrid Medium-Duty Truck Demonstration and Evaluation Program was sponsored by the United States Department of Energy (DOE) using American Recovery and Reinvestment Act of 2009 (ARRA) funding. The purpose of the program is to develop a path to migrate plug-in hybrid electric vehicle (PHEV) technology to medium-duty vehicles by demonstrating and evaluating vehicles in diverse applications. The program also provided three production-ready PHEV systems—Odyne Systems, Inc. (Odyne) Class 6 to 8 trucks, VIA Motors, Inc. (VIA) half-ton pickup trucks, and VIA three-quarter-ton vans. The vehicles were designed, developed, validated, produced, and deployed. Data were gathered and tests were run to understand the performance improvements, allow cost reductions, and provide future design changes. A smart charging system was developed and produced during the program. The partnerships for funding included the DOE; the California Energy Commission (CEC); the South Coast Air Quality Management District (SCAQMD); the Electric Power Research Institute (EPRI); Odyne; VIA; Southern California Edison; and utility and municipal industry participants. The reference project numbers are DOE FOA-28 award number EE0002549 and SCAQMD contract number 10659.

Electro-deposition painting process improvement of cab truck by Six Sigma concept

Science.gov (United States)

Kawitu, Kitiya; Chutima, Parames

2017-06-01

The case study company is a manufacturer of trucks and currently facing a high rework cost due to the thickness of the electro-deposited paint (EDP) of the truck cab is lower than standard. In addition, the process capability is very low. The Six Sigma concept consisting of 5 phases (DMAIC) is applied to determine new parameter settings for each significant controllable factor. After the improvement, EDP thickness of the truck cab increases from 17.88μ to 20μ (i.e. standard = 20 ± 3μ). Moreover, the process capability indexes (Cp and Cpk) are increased from 0.9 to 1.43, and from 0.27 to 1.43, respectively. This improvement could save the rework cost about 1.6M THB per year.

Commercial border crossing and wait time measurement at Laredo World Trade Bridge and the Colombia-Solidarity Bridge.

Science.gov (United States)

2012-03-01

This research is to establish a baseline and on-going measurement of border crossing times and : delay by measuring travel times for commercial trucks crossing the port of entry (POE) from : Mexico into Texas at the Laredo World Trade Bridge and the ...

Light Duty Truck Characteristics, Historical Data Base

Science.gov (United States)

1979-12-01

The report is a collection of data concerning physical, operating, performance, and market characteristics of light duty trucks for the model years 1972 and 1975 thru 1977. The data is stored on tape in DOT/TSC DEC System 10 computer system. Informat...

Impact of Platon ETC system on intercity trucking cost

Directory of Open Access Journals (Sweden)

Pogotovkina Natalya

2017-01-01

Full Text Available In 2015 Platon ETC System, a system of charging trucks with gross vehicle weight exceeding 12 tons, was implemented in Russia. The payment is collected as a compensation fo0 the damage caused to the federal public roads. Platon system is an additional source of financing for the road sector. However, its implementation made the carriers face the increasing costs. This paper presents the first results of the system functioning and the problems, associated with it. We consider the foreign systems of truck charging. The results of calculations, which show the effect of the toll collection on the prime cost of road freight transportation, are also presented.

Defining the urban area for cross national comparison of health indicators: the EURO-URHIS 2 boundary study.

Science.gov (United States)

Higgerson, James; Birt, Christopher A; van Ameijden, Erik; Verma, Arpana

2017-05-01

Despite much research focusing on the impact of the city condition upon health, there still remains a lack of consensus over what constitutes an urban area (UA). This study was conducted to establish comparable boundaries for the UAs participating in EURO-URHIS 2, and to test whether the sample reflected the heterogeneity of urban living. Key UA contacts ( n = 28) completed a cross-sectional questionnaire, which included where available comparison between Urban Audit city and larger urban zone (LUZ) boundaries and public health administration areas (PHAAs). Additionally, broad health and demographic indicators were sought to test for heterogeneity of the EURO-URHIS 2 sample. Urban Audit city boundaries were found to be suitable for data collection in 100% ( n = 21) of UAs where Urban Audit data were available. The remainder ( n = 7) identified PHAA boundaries akin to the 'city' level. Heterogeneity was observed in the sample for population size and infant mortality rate. Heterogeneity could not be established for male and female life expectancy. This study was able to establish comparable boundaries for EURO-URHIS 2 data collection, with the 'city' area being selected for data collection. The homogeneity of life expectancy indicators was reflective of sub-regional similarities in life expectancy, whilst population estimates and rates of infant mortality indicated the presence of heterogeneity within the sample. Future work would trial these methods with a larger number of indicators and for a larger number of UAs. © The Author 2015. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

76 FR 59166 - Navistar Truck Development and Technology Center, a Subsidiary of Navistar International...

Science.gov (United States)

2011-09-23

... Development and Technology Center, a Subsidiary of Navistar International Corporation Truck Division, Fort... International Corporation, Truck Division, Fort Wayne, Indiana (subject firm). The negative determination was... is a headcount reduction across the nation, made possible by the Global Outsourcing. * * * '' The...

Truck bomb and insider threats to nuclear facilities

International Nuclear Information System (INIS)

Hirsch, D.

1987-01-01

In the nuclear field, two the these weak links in the security chain are the truck bomb threat and the insider threat. The risks associated with terrorist use of vehicular bombs against nuclear targets surfaced (actually, resurfaced) followed the terrorist attacks on the US Embassy annex and the Marine compound in Leb Concern was expressed that similar attacks against nuclear facilities could result in substantial damage and release of radioactivity. Since the current regulations of the NRC require licensees to protect only against attacks on foot (and even then, only against very small attacking forces), shortly after the Lebanon bombings, that agency commenced an urgent rulemaking to require its licensees to protect against truck bombs. Inexplicably, that rulemaking was called off after research results indicated that the truck bomb threat to nuclear facilities was even more serious than previously thought. Even were nuclear facilities adequately protected against external attack, be the aim theft or sabotage, the greatest security risk to these sites - the threat of action by insiders - would remain. The traditional methods of protecting against the insider threat - such as the two-person rule, strict compartmentalization of vital areas, and design features that make damage to two or more redundant systems by one individual difficult - are generally expensive and have encountered substantial resistance from the nuclear industry, which has restrained the NRC from requiring them

Optimization of a truck-drone in tandem delivery network using K-means and genetic algorithm

OpenAIRE

Mourelo Ferrandez, Sergio; Harbison, Timothy; Webwer, Troy; Sturges, Robert; Rich, Robert

2016-01-01

Purpose: The purpose of this paper is to investigate the effectiveness of implementing unmanned aerial delivery vehicles in delivery networks. We investigate the notion of the reduced overall delivery time and energy for a truck-drone network by comparing the in-tandem system with a stand-alone delivery effort. The objectives are (1) to investigate the time and energy associated to a truck-drone delivery network compared to standalone truck or drone, (2) to propose an optimizat...

The Problem of Multiple Criteria Selection of the Surface Mining Haul Trucks

Science.gov (United States)

Bodziony, Przemysław; Kasztelewicz, Zbigniew; Sawicki, Piotr

2016-06-01

Vehicle transport is a dominant type of technological processes in rock mines, and its profit ability is strictly dependent on overall cost of its exploitation, especially on diesel oil consumption. Thus, a rational design of transportation system based on haul trucks should result from thorough analysis of technical and economic issues, including both cost of purchase and its further exploitation, having a crucial impact on the cost of minerals extraction. Moreover, off-highway trucks should be selected with respect to all specific exploitation conditions and even the user's preferences and experience. In this paper a development of universal family of evaluation criteria as well as application of evaluation method for haul truck selection process for a specific exploitation conditions in surface mining have been carried out. The methodology presented in the paper is based on the principles of multiple criteria decision aiding (MCDA) using one of the ranking method, i.e. ELECTRE III. The applied methodology has been allowed for ranking of alternative solution (variants), on the considered set of haul trucks. The result of the research is a universal methodology, and it consequently may be applied in other surface mines with similar exploitation parametres.

Biomechanical investigation of prolonged driving in an ergonomically designed truck seat prototype.

Science.gov (United States)

Cardoso, Michelle; McKinnon, Colin; Viggiani, Dan; Johnson, Michel J; Callaghan, Jack P; Albert, Wayne J

2018-03-01

A postural evaluation during a prolonged driving task was conducted to determine the ergonomic validity of a new freely adjustable truck seat prototype. Twenty participants were recruited to perform two 2-h simulated driving sessions. Postures were assessed using motion capture, accelerometers and pressure pads. Subjective discomfort was also monitored in 15-min increments using ratings of perceived discomfort (RPD) and the Automotive Seating Discomfort Questionnaire. Participants had a more neutral spine posture during the first hour of the drive and reported lower RPDs while sitting in the prototype. Pairing the gluteal backrest panel with the adjustable seat pan helped reduce the average sitting pressure. The industry-standard truck seat may lead to the development of poor whole body posture, and the proposed ergonomic redesign of a new truck seat helped improve sitting posture and reduce perceived discomfort. Practitioner Summary: A new freely adjustable truck seat prototype was compared to an Industry standard seat to assess hypothesised improvements to sitting posture and discomfort for long haul driving. It was found that the adjustable panels in the prototype helped promote spine posture, reduce sitting pressure and improved discomfort ratings.

Diffusion processes in the magnetopause boundary layer

International Nuclear Information System (INIS)

Tsurutani, B.T.; Thorne, R.M.

1982-01-01

Anomalous cross-field diffusion of magnetosheath ions and electrons is a direct consequence of cyclotron-resonant scattering by electrostatic and electromagnetic emissions which are continuously present within the magnetopause boundary layer. Expressions for the rate of cross-field diffusion involving either type of wave are developed and expressed in terms of the absolute upper limit referred to as Bohm diffusion. For the typical average intensity of waves observed in the boundary layer, resonant electron cross-field diffusion is always insignificant. However, magnetosheath ions, resonant with low frequency electrostatic waves, may be transported inward at a rate approaching one tenth the Bohm rate (D/sub perpendiculartsperpendicular/roughly-equal10 3 km 2 /s). While this is not the only mechanism capable of explaining the presence of the low latitude boundary layer it is adequate to account for the typical boundary layer thickness and it should occur at all local times and under all interplanetary conditions. It consequently provides a continuous mechanism for significant mass and momentum transfer across the magnetopause under conditions when field merging is inoperative

GA-4 and GA-9 legal weight truck shipping cask development

International Nuclear Information System (INIS)

Grenier, R.M.; Meyer, R.J.; Jensen, M.F.

1989-02-01

We are developing two new legal weight truck spent fuel shipping casks that will carry four PWR or nine BWR spent fuel assemblies. They are being developed to meet requirements to dispose of nuclear wastes at a permanent disposal site. Our primary goal is to maximize the number of fuel elements of each fuel type that a legal weight truck (LWT) cask can carry, while ensuring that the design meets all NRC licensing requirements. 1 ref., 4 figs

Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system.

Science.gov (United States)

Hannan, M A; Arebey, Maher; Begum, R A; Basri, Hassan

2011-12-01

This paper deals with a system of integration of Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system. RFID, GPS, GPRS and GIS along with camera technologies have been integrated and developed the bin and truck intelligent monitoring system. A new kind of integrated theoretical framework, hardware architecture and interface algorithm has been introduced between the technologies for the successful implementation of the proposed system. In this system, bin and truck database have been developed such a way that the information of bin and truck ID, date and time of waste collection, bin status, amount of waste and bin and truck GPS coordinates etc. are complied and stored for monitoring and management activities. The results showed that the real-time image processing, histogram analysis, waste estimation and other bin information have been displayed in the GUI of the monitoring system. The real-time test and experimental results showed that the performance of the developed system was stable and satisfied the monitoring system with high practicability and validity. Copyright © 2011 Elsevier Ltd. All rights reserved.

INTRALOG, intelligent autonomous truck applications in Logistics

NARCIS (Netherlands)

MSc Berry Gerrits; Dr. Frans Tillema; MMC A.F. Spruijt; MSc Leo Buning

2016-01-01

INTRALOG is a project, to better use of materials, there by leading to improvements for People (better safety, lower physical work load), Planet (lower emissions and energy/ fuel con started September 2015, in which Automated Guided Truck Applications will be developed. Automated systems typically

Real world efficiency of retrofit partial-flow diesel particulate filters for trucks

International Nuclear Information System (INIS)

Van Asch, R.; Verbeek, R.; Ligterink, N.; Kadijk, G.

2009-11-01

In 2006 the Dutch Ministry of Housing, Spatial Planning and the Environment (VROM) introduced an incentive scheme for retrofitting diesel particulate filters on Euro II and Euro III trucks. This scheme involves both partial flow and full flow diesel particulate filters (also called semi-open or open respectively wall-flow or closed filters). In the period 2007 till January 2009 about 15,000 partial flow filters and 8,000 full flow diesel particulate filters were installed. The minimum filtration efficiency requirement for the partial flow diesel particulate filters is 50% during the type approval test. In 2008 an engine dynamometer test programme was conducted to measure the filtration efficiency of retrofit open particulates filters of heavy trucks. This led to somewhat disappointing results with average filtration efficiencies in the range of 5-20% during city and national motorway driving conditions up to 20-40% during long distance motorway driving. This result leads to two main questions: (1) Is this result also representative for medium heavy trucks used for delivery, and (2) do similar efficiencies show up also in tests on entire vehicles, tested under conditions as close as possible to their real world usage profile. To this end, an additional measurement programme was defined, which is reported here. The objective of the study reported here is to determine the real world filtration efficiency of retrofit partial flow particulate filters for a number of trucks under different driving conditions such as city and motorway driving. The emphasis should be on medium heavy trucks typically used for national delivery.

Prediction of fuel consumption of mining dump trucks: A neural networks approach

International Nuclear Information System (INIS)

Siami-Irdemoosa, Elnaz; Dindarloo, Saeid R.

2015-01-01

Highlights: • A neural network model of fuel consumption in mining haul trucks was constructed and tested. • Using the cyclic activities, the model was able to predict unseen (testing) data. • Trucks idle times were identified as the most important unnecessary energy consuming portion of the network. • Practical remedies, based on the nature of mining operations, were proposed to reduce the energy consumption. - Abstract: Fuel consumption of mining dump trucks accounts for about 30% of total energy use in surface mines. Moreover, a fleet of large dump trucks is the main source of greenhouse gas (GHG) generation. Modeling and prediction of fuel consumption per cycle is a valuable tool in assessing both energy costs and the resulting GHG generation. However, only a few studies have been published on fuel prediction in mining operations. In this paper, fuel consumption per cycle of operation was predicted using artificial neural networks (ANN) technique. Explanatory variables were: pay load, loading time, idled while loaded, loaded travel time, empty travel time, and idled while empty. The output variable was the amount of fuel consumed in one cycle. Mean absolute percentage error (MAPE) of 10% demonstrated applicability of ANN in prediction of the fuel consumption. The results demonstrated the considerable effect of mining trucks idle times in fuel consumption. A large portion of the unnecessary energy consumption and GHG generation, in this study, was solely due to avoidable idle times. This necessitates implementation of proper actions/remedies in form of both preventive and corrective actions

Hydraulic Hybrid Parcel Delivery Truck Deployment, Testing & Demonstration

Energy Technology Data Exchange (ETDEWEB)

Gallo, Jean-Baptiste [Calstart Incorporated, Pasadena, CA (United States)

2014-03-07

Although hydraulic hybrid systems have shown promise over the last few years, commercial deployment of these systems has primarily been limited to Class 8 refuse trucks. In 2005, the Hybrid Truck Users Forum initiated the Parcel Delivery Working Group including the largest parcel delivery fleets in North America. The goal of the working group was to evaluate and accelerate commercialization of hydraulic hybrid technology for parcel delivery vehicles. FedEx Ground, Purolator and United Parcel Service (UPS) took delivery of the world’s first commercially available hydraulic hybrid parcel delivery trucks in early 2012. The vehicle chassis includes a Parker Hannifin hydraulic hybrid drive system, integrated and assembled by Freightliner Custom Chassis Corp., with a body installed by Morgan Olson. With funding from the U.S. Department of Energy, CALSTART and its project partners assessed the performance, reliability, maintainability and fleet acceptance of three pre-production Class 6 hydraulic hybrid parcel delivery vehicles using information and data from in-use data collection and on-road testing. This document reports on the deployment of these vehicles operated by FedEx Ground, Purolator and UPS. The results presented provide a comprehensive overview of the performance of commercial hydraulic hybrid vehicles in parcel delivery applications. This project also informs fleets and manufacturers on the overall performance of hydraulic hybrid vehicles, provides insights on how the technology can be both improved and more effectively used. The key findings and recommendations of this project fall into four major categories: -Performance, -Fleet deployment, -Maintenance, -Business case. Hydraulic hybrid technology is relatively new to the market, as commercial vehicles have been introduced only in the past few years in refuse and parcel delivery applications. Successful demonstration could pave the way for additional purchases of hydraulic hybrid vehicles throughout the

Interorganizational Boundary Spanning in Global Software Development

DEFF Research Database (Denmark)

Søderberg, Anne-Marie; Romani, Laurence

, and which skills and competencies they draw on in their efforts to deal with emerging cross-cultural issues in a way that paves ground for developing a shared understanding and common platform for the client and vendor representatives. A framework of boundary spanning leadership practices is adapted...... to virtuality and cultural diversity. This paper, which draws on a case study of collaborative work in a global software development project, focuses on key boundary spanners in an Indian vendor company, who are responsible for developing trustful and sustainable client relations and coordinating complex...... projects across multiple cultures, languages, organisational boundaries, time zones and geographical distances. It looks into how these vendor managers get prepared for their complex boundary spanning work, which cross-cultural challenges they experience in their collaboration with Western clients...

Boundary maps for $C^*$-crossed products with R with an application to the quantum Hall effect

OpenAIRE

Kellendonk, Johannes; Schulz-Baldes, Hermann

2004-01-01

The boundary map in K-theory arising from the Wiener-Hopf extension of a crossed product algebra with R is the Connes-Thom isomorphism. In this article the Wiener Hopf extension is combined with the Heisenberg group algebra to provide an elementary construction of a corresponding map on higher traces (and cyclic cohomology). It then follows directly from a non-commutative Stokes theorem that this map is dual w.r.t.Connes' pairing of cyclic cohomology with K-theory. As an application, we prove...

TruckWeight wireless onboard scale helps oilfield services fleet find profit, compliance

Energy Technology Data Exchange (ETDEWEB)

Anon.

2007-05-15

This article presented a wireless scale that measures temperature and pressure changes in a vehicle's air suspension. The instrument is being used by Alberta-based Rusch Inc., an operator of tank trucks and pup trailers which haul potassium chloride solution, methanol, frac oil, crude oil and other fluids. Made by TruckWeight Inc., the Smart Scale relays data to a handheld receiver using a low-powered safe radio transmitter. It is designed so its power output is not high enough to ignite gases in the atmosphere near wellheads. The information from the Smart Scale is interpreted by a small computer in a handheld receiver. The axle weight and gross vehicle weight measurement is accurate to within 150 pounds. Rusch trucks operate on steep grades all year, encountering soft ground in the summer, and frozen terrain in the winter. When loading is done in the bush, it is impossible to reliably weigh the trucks, whose licensed gross combination weight is 51,300 kilograms. In Alberta, an overweight fine can trigger an audit of a company's safety record and operating practices. Running overweight also places stress on axles, suspensions, wheel-end components tires and brakes. Therefore, adhering to the rated weight is essential. In 2006, Rusch Inc. installed the Smart Scale wireless on-board scale for trucks, tractors and trailers with air suspension. The scale includes a sensor with an integrated antenna and DOT fittings for the vehicle's airline. While the truck is being loaded, the scale produces readings every 3 seconds. This maintenance-free instrument is accurate in temperature extremes ranging from -40 F to 158 F and uses common AA batteries. It is waterproof, weatherproof, shock resistant and non-corrosive. The cost to equip a tractor and trailer with a Smart Scale is $1,590 US, half the cost of a hard-wired scale. 5 figs.

The pickup and delivery problem with cross-docking opportunity

DEFF Research Database (Denmark)

Petersen, Hanne Løhmann; Røpke, Stefan

2011-01-01

delivery by one truck, or by being picked up and transported to the cross-dock by one vehicle, and subsequently delivered at its final destination by another vehicle. Handling times at customers sites and terminal are given. A typical daily instance includes 500-1,000 requests. We solve the problem using...

Optimization of a truck-drone in tandem delivery network using k-means and genetic algorithm

Directory of Open Access Journals (Sweden)

Sergio Mourelo Ferrandez

2016-04-01

Full Text Available Purpose: The purpose of this paper is to investigate the effectiveness of implementing unmanned aerial delivery vehicles in delivery networks. We investigate the notion of the reduced overall delivery time, energy, and costs for a truck-drone network by comparing the in-tandem system with a stand-alone delivery effort. The objectives are (1 to investigate the time, energy, and costs associated to a truck-drone delivery network compared to standalone truck or drone, (2 to propose an optimization algorithm that determines the optimal number of launch sites and locations given delivery requirements, and drones per truck, (3 to develop mathematical formulations for closed form estimations for the optimal number of launch locations, optimal total time, as well as the associated cost for the system. Design/methodology/approach: The design of the algorithm herein computes the minimal time of delivery utilizing K-means clustering to find launch locations, as well as a genetic algorithm to solve the truck route as a traveling salesmen problem (TSP. The optimal solution is determined by finding the minimum cost associated to the parabolic convex cost function. The optimal min-cost is determined by finding the most efficient launch locations using K-means algorithms to determine launch locations and a genetic algorithm to determine truck route between those launch locations.  Findings: Results show improvements with in-tandem delivery efforts as opposed to standalone systems. Further, multiple drones per truck are more optimal and contribute to savings in both energy and time. For this, we sampled various initialization variables to derive closed form mathematical solutions for the problem. Originality/value: Ultimately, this provides the necessary analysis of an integrated truck-drone delivery system which could be implemented by a company in order to maximize deliveries while minimizing time and energy. Closed-form mathematical solutions can be used as

Analysis of Technology Options to Reduce the Fuel Consumption of Idling Trucks; FINAL

International Nuclear Information System (INIS)

Stodolsky, F.; Gaines, L.; Vyas, A.

2000-01-01

Long-haul trucks idling overnight consume more than 838 million gallons (20 million barrels) of fuel annually. Idling also emits pollutants. Truck drivers idle their engines primarily to (1) heat or cool the cab and/or sleeper, (2) keep the fuel warm in winter, and (3) keep the engine warm in the winter so that the engine is easier to start. Alternatives to overnight idling could save much of this fuel, reduce emissions, and cut operating costs. Several fuel-efficient alternatives to idling are available to provide heating and cooling: (1) direct-fired heater for cab/sleeper heating, with or without storage cooling; (2) auxiliary power units; and (3) truck stop electrification. Many of these technologies have drawbacks that limit market acceptance. Options that supply electricity are economically viable for trucks that are idled for 1,000-3,000 or more hours a year, while heater units could be used across the board. Payback times for fleets, which would receive quantity discounts on the prices, would be somewhat shorter

Differential Control Strategy based on an Equal Slip Rate for an All-wheel Electricdrive Underground Articulated Dumping Truck

Directory of Open Access Journals (Sweden)

Jin Chun

2014-09-01

Full Text Available A differential control strategy based on equal slip rates is introduced to improve the steering stability of an all-wheelelectric-drive underground articulated dumping truck. Steering kinematic and dynamic models of the truck are derived to describe the movement relationship and force of the driving wheels. In consideration of the difficulty of obtaining the absolute velocity for an all-wheel-drive truck, an acceleration sensor was set on a test truck, and a kalman filter was applied to obtain the actual value for the truck body. Simulation results for an equal-slip control strategy were compared with experimental results for an equal-torque control strategy. In the simulation, the four-wheel slip rate was 0.08 and the steering system of the truck was stable. The results verify that the equal-slip control strategy makes better use of the ground adhesion coefficient, is able to reasonably distribute drive power, notably reduces tire wear, and improves the use of driving power.

Effects of boundary conditions on temperature and density in an EXTRAP Z-pinch

International Nuclear Information System (INIS)

Drake, J.R.; Karlsson, P.

1985-08-01

Using the fluid equations, we examine transport in an Extrap configuration by carrying out calculations incorporating model profiles for the density and temperature. The goal of this analysis is to examine the scaling of the pinch equilibrium plasma density, temperature and radius with parameters that are characteristic for Extrap Z-pinches. These parameters include the discharge current, the neutral hydrogen filling density, an oxygen impurity fractional concentration and the condition at the pinch boundary. An Extrap Z-pinch is a pinch discharge where the current channel has a characteristic non-circular cross-section achieved by bounding the discharge by a magnetic separatrix produced when a vacuum octupole magnetic field, generated by currents in external conductors, combines with the self-magnetic field produced by the discharge current. The pinch boundary is changed from a plasma-vacuum boundary to an interface between a high-beta pinch plasma and a low-beta plasma contained in the vacuum magnetic field. The energy that is lost from the pinch region sustains this boundary layer. The introduction of a separatrix boundary around the pinch with four X-point nulls deteriorates the containment of the pinch somewhat. However the presence of the warm, low-beta plasma scrape-off layer, which provides a boundary condition on the pinch, tends to counteract the negative effects of the poorer confinement. Thus the equilibrium parameters that characterize the pinch may not be severely deteriorated by the introduction of the separatrix when the entire configuration, including the scrape-off layer, is considered. (author)

Automatic checking of heavy element content in polymetallic ores directly in transportation containers

International Nuclear Information System (INIS)

Varvaritsa, V.P.; Mamikon'yan, S.V.; Nagornyj, V.Ya.

1981-01-01

An automatic measuring instrument has been developed and used to check rapidly the content of lead in ores transported by trolley cars, dump trucks, dump cars or other open containers. The measuring technique is based on gamma backscattering and X-ray fluorescence. Influences of container movements, volumetric density changes and matrix effects on the achievable accuracy are briefly discussed

The properties of water in swollen cross-linked polystyrene sulfo acids

Science.gov (United States)

Gagarin, A. N.; Tokmachev, M. G.; Kovaleva, S. S.; Ferapontov, N. B.

2008-11-01

The properties of water in polystyrene sulfo acid gels with various cross-linking degrees were studied by optical volumetry and dynamic desorption porosimetry. The isotherms of water desorption obtained by dynamic desorption porosimetry coincided with isopiestic isotherms, which allowed this method to be recommended for the determination of the amount of water in polymer gels. Joint optical volumetry and dynamic desorption porosimetry studies showed that the interphase boundary in the cross-liked hydrophilic polymer-water system did not coincide with the visible gel boundary, because gels were two-phase systems, which contained water of two types, “free” and “bound.” The influence of the degree of polymer cross-linking on the amounts and properties of water of the two types was studied. It was shown that constants of water distribution in the polymer could be calculated from the dynamic desorption porosimetry data.

A truck cask design for shipping defense high-level waste

International Nuclear Information System (INIS)

Madsen, M.M.; Zimmer, A.

1985-01-01

The Defense High-Level Waste (DHLW) cask is a Type B packaging currently under development by the U.S. Department of Energy (DOE). This truck cask has been designed to initially transport borosilicate glass waste from the Defense Waste Processing Facility (DWPF) to the Waste Isolation Pilot Plant (WIPP). Specific program activities include designing, testing, certifying, and fabricating a prototype legal-weight truck cask system. The design includes such state-of-the-art features as integral impact limiters and remote handling features. A replaceable shielding liner provides the flexibility for shipping a wide range of waste types and activity levels

Optimization of Front Axle Suspension System of Articulated Dump Truck

DEFF Research Database (Denmark)

Langer, Thomas Heegaard; Christensen, Brian B.; Mouritsen, Ole Ø.

2010-01-01

that has been subjected to comfort improvement is a two axle articulated dump truck. The comfort has been in terms of whole body vibration exposure and the overall improvement has been made possible by adding front axle suspension. However, a hydraulic stabilizing system between the tractor and trailer...... to evaluate the whole body vibrations. By use of a multibody simulation model of the dump truck the whole body vibration exposure has been computed using the predefined work cycle as model input. The design parameters comprise the components of the hydraulic subsystem of the suspension, i.e., the size...

76 FR 68220 - Navistar Truck Development and Technology Center; a Subsidiary of Navistar International...

Science.gov (United States)

2011-11-03

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-75,151; TA-W-75,151A] Navistar... Renaissance and Alpha Personnel, Inc. Fort Wayne, IN; Navistar Truck Reliability Center, a Subsidiary of... Reliability Center, a Subsidiary of Navistar International Corporation, Truck Division, 3033 Wayne Trace, Fort...

Unintentional stoppages of trucks hauling high-level nuclear waste in Nevada

International Nuclear Information System (INIS)

Glickman, T.S.

1991-01-01

Any unintentional stoppage of trucks hauling high-level nuclear waste in Nevada could intensify public concerns about the negative impacts of the Yucca Mountain Project. This paper provides estimates of the expected number and frequency of such stoppages under several alternative scenarios for the routing and volume of the anticipated truck shipments. At least twice as many truck stoppages are expected to occur on freeways as on non-freeways, and at least twice as many are expected to occur in rural areas as in other areas. The expected frequency of such stoppages in the state is estimated to range from about 3 per year to one every 3 1/2 years. About one in every 4 of the stoppages is expected to take place in Las Vegas and 3 out of every 4 are expected to be non-accidents such as mechanical disablements. The minimum duration of the stoppages is expected to be on the order of half an hour for disablements and an hour for accidents

Cross-scale modelling of transpiration from stomata via the leaf boundary layer

Science.gov (United States)

Defraeye, Thijs; Derome, Dominique; Verboven, Pieter; Carmeliet, Jan; Nicolai, Bart

2014-01-01

Background and Aims Leaf transpiration is a key parameter for understanding land surface–climate interactions, plant stress and plant structure–function relationships. Transpiration takes place at the microscale level, namely via stomata that are distributed discretely over the leaf surface with a very low surface coverage (approx. 0·2–5 %). The present study aims to shed more light on the dependency of the leaf boundary-layer conductance (BLC) on stomatal surface coverage and air speed. Methods An innovative three-dimensional cross-scale modelling approach was applied to investigate convective mass transport from leaves, using computational fluid dynamics. The gap between stomatal and leaf scale was bridged by including all these scales in the same computational model (10−5–10−1 m), which implies explicitly modelling individual stomata. Key Results BLC was strongly dependent on stomatal surface coverage and air speed. Leaf BLC at low surface coverage ratios (CR), typical for stomata, was still relatively high, compared with BLC of a fully wet leaf (hypothetical CR of 100 %). Nevertheless, these conventional BLCs (CR of 100 %), as obtained from experiments or simulations on leaf models, were found to overpredict the convective exchange. In addition, small variations in stomatal CR were found to result in large variations in BLCs. Furthermore, stomata of a certain size exhibited a higher mass transfer rate at lower CRs. Conclusions The proposed cross-scale modelling approach allows us to increase our understanding of transpiration at the sub-leaf level as well as the boundary-layer microclimate in a way currently not feasible experimentally. The influence of stomatal size, aperture and surface density, and also flow-field parameters can be studied using the model, and prospects for further improvement of the model are presented. An important conclusion of the study is that existing measures of conductances (e.g. from artificial leaves) can be

Facility for the storage of spent, heat-emitting and container-enclosed nuclear reactor fuel assemblies

International Nuclear Information System (INIS)

Hennings, U.

1987-01-01

Patent for facility for the storage of spent, heat-emitting and container-enclosed nuclear reactor fuel assemblies, which are arranged within a building in a horizontal position and are cooled by a gas stream, whereby the building has a storage and a loading zone, characterized by the fact that pallet trucks arranged one above the other in a row and such that an interspace is left for the receiving positions for the containers, the the pallet trucks can be moved along rails that extend between two side walls arranged opposite to one another in the storage zone, that the storage zone can be loaded and unloaded by opening located in these two side walls, and that the gas stream only circulates within the building

Lone workers attitudes towards their health: views of Ontario truck drivers and their managers.

Science.gov (United States)

McDonough, Beatrice; Howard, Michelle; Angeles, Ricardo; Dolovich, Lisa; Marzanek-Lefebvre, Francine; Riva, John J; Laryea, Stephanie

2014-05-14

Truck driving is the second most common occupation among Canadian men. Transportation of goods via roads is of crucial importance for the Canadian economy. The industry is responsible annually for $17 billion in GDP and is projected to increase by 28% over the next 10 years. Recruitment is an issue with 20% of drivers projected to retire or leave the profession in the next 10 years. Despite the reliance on transport truck drivers for the delivery of goods which affects Canada's economy and daily living of residents, little is known about the health care needs of this large cohort of primarily male lone workers from a drivers' perspective. Transport truck drivers are independent workers whose non traditional workplace is their tractor, the truck stops and the journey on the road.The objective of this study was to obtain a contextually informed description of lifestyle issues, health and disease risk factors experienced by drivers and perceived by their managers in the truck driving occupation. Using a grounded theory approach, 4 focus groups were conducted with drivers (n = 16) and managers (n = 10) from two trucking companies in Southwestern Ontario to identify the lived experience of the drivers as it relates to preventable risks to health and wellness. A semi structured guided interview was used to explore the lifestyle context of transport truck driving and organizational aspects of the occupation (workplace culture, working conditions and health and wellness promotion). The predominant themes described stress, workplace, communication, lifestyle, driving culture, family, and fatigue concerns. In terms of the transportation work environment, drivers and managers were aware of the profession's potential to foster lifestyle related chronic diseases but described challenges in making the profession more amenable to a healthy lifestyle. Workplace environmental determinants are significant in shaping health behaviours. Chronic disease health risks were the

Impacts of Aging Emission Control Systems on In-Use Heavy-Duty Diesel Truck Emission Rates

Science.gov (United States)

Preble, C.; Cados, T.; Harley, R.; Kirchstetter, T.

2017-12-01

Heavy-duty diesel trucks are a major source of nitrogen oxides (NOx) and black carbon (BC) in urban environments, contributing to persistent ozone and particulate matter air quality problems. Recently, diesel particle filter (DPF) and selective catalytic reduction (SCR) emission control systems have become standard equipment on new trucks. Particle filters can also be installed as a retrofit on older engines. Prior work has shown that exhaust filters and SCR systems effectively reduce BC and NOx emission rates by up to 90 and 80%, respectively (Preble et al., ES&T 2015). There is concern, however, that DPFs may promote the formation of ultrafine particles (UFP) and increase tailpipe emissions of nitrogen dioxide (NO2). Additionally, urea-based SCR systems for NOx control may form nitrous oxide (N2O), an important contributor to stratospheric ozone depletion. The effectiveness of these emission controls has been thoroughly evaluated in the laboratory, but the long-term durability of in-use systems and their impacts on co-emitted species have not been well characterized. To evaluate the in-use performance of DPF and SCR systems, pollutant emissions from thousands of diesel trucks were measured over several years at the Port of Oakland and the Caldecott Tunnel in the San Francisco Bay Area. Pollutants present in the exhaust plumes of individual trucks were measured at high time resolution (≥1 Hz) as trucks passed under a mobile lab stationed on an overpass. Fuel-based emission factors (g pollutant emitted per kg fuel burned) were calculated for individual trucks and linked via recorded license plates to vehicle attributes, including engine model year and installed emission control systems. Use of DPFs reduced the BC emission rate by up to 95% at both locations. SCR systems were more effective at reducing NOx emissions under the uphill, highway driving conditions at the Caldecott Tunnel. The emission rates of co-emitted species NO2, UFP, and N2O depended on driving

Total Weight and Axle Loads of Truck Units in the Transport of Timber Depending on the Timber Cargo

Directory of Open Access Journals (Sweden)

Grzegorz Trzciński

2018-03-01

Full Text Available When transporting timber, the high variability of species, assortments and moisture content of the wood raw material does not allow the weight of the transported timber to be precisely determined. This often contributes to the excessive weight loading of the entire truck unit. The aim of the research is to present the variability of the total weight of truck units with wood cargoes (GVW—gross vehicle weight depending on the weight of the empty unit and the transported timber load, as well as to analyze the changes in GVW, unit loads of wood and load on individual truck unit axles depending on the season. This study analyzes the total weight of truck units for 376 transports of Scots pine timber at different times of the year. The total weight of the truck units depends on the weight of an empty unit and the weight of the load. GVW was determined by using a weighbridge to weigh the vehicles and then the empty unit after unloading. The weight of the load was obtained as the difference between GVW and the tare. It was found that GVW differed significantly depending on the truck unit used, ranging from 43.60–58.80 Mg, often exceeding permissible limits for public roads. The individual axle loads for various truck units were also analyzed. The obtained results indicate that these loads are more equally distributed in the case of five-axle trucks compared to six-axle ones.

The Impact of Wireless Technology on Loading Trucks at an Auto Parts Distribution Center

Science.gov (United States)

Goomas, David T.

2012-01-01

An intervention was introduced for truck loaders that used wireless vehicle mount computers that included auditory, visual feedback, and immediate data delivery. The implementation reliably reduced pallets from being loaded out of sequence for all outbound trucks in multistop routes. The role of the organizational behavior management (OBM)…

On the road again: concurrency and condom use among Uganda truck drivers.

Science.gov (United States)

Costenbader, Elizabeth C; Lancaster, Kathryn; Bufumbo, Leonard; Akol, Angela; Guest, Greg

2015-01-01

Long-distance truck drivers have been shown to be a critical population in the spread of HIV in Africa. In 2009, surveys with 385 Ugandan long-distance truck drivers measured concurrency point prevalence with two methods; it ranged from 37.4% (calendar-method) to 50.1% (direct question). The majority (84%) of relationships reported were long-term resulting in a long duration of overlap (average of 58 months) across concurrent partnerships. Only 7% of these men reported using any condoms with their spouses during the past month. Among all non-spousal relationships, duration of relationship was the factor most strongly associated with engaging in unprotected sex in the past month in a multivariable analyses controlling for partner and relationship characteristics. Innovative intervention programs for these men and their partners are needed that address the realities of truck drivers' lifestyles.

Optimizing Time Windows For Managing Export Container Arrivals At Chinese Container Terminals

DEFF Research Database (Denmark)

Chen, Gang; Yang, Zhongzhen

2010-01-01

window management programme that is widely used in Chinese terminals to facilitate terminal and truck delivery operations. Firstly, the arrangement of time windows is assumed to follow the principle of minimizing transport costs. A cost function is defined that includes the costs of truck and driver...... waiting time, fuel consumption associated with truck idling, storage time of the containerized cargos and yard fee. Secondly, to minimize the total cost, a heuristic is developed based on a genetic algorithm to find a near optimal time window arrangement. The optimized solution involves the position...

Feasibility of landfill gas as a liquefied natural gas fuel source for refuse trucks.

Science.gov (United States)

Zietsman, Josias; Bari, Muhammad Ehsanul; Rand, Aaron J; Gokhale, Bhushan; Lord, Dominique; Kumar, Sunil

2008-05-01

The purpose of this paper is to develop a methodology to evaluate the feasibility of using landfill gas (LFG) as a liquefied natural gas (LNG) fuel source for heavy-duty refuse trucks operating on landfills. Using LFG as a vehicle fuel can make the landfills more self-sustaining, reduce their dependence on fossil fuels, and reduce emissions and greenhouse gases. Acrion Technologies Inc. in association with Mack Trucks Inc. developed a technology to generate LNG from LFG using the CO2 WASH process. A successful application of this process was performed at the Eco Complex in Burlington County, PA. During this application two LNG refuse trucks were operated for 600 hr each using LNG produced from gases from the landfill. The methodology developed in this paper can evaluate the feasibility of three LFG options: doing nothing, electricity generation, and producing LNG to fuel refuse trucks. The methodology involved the modeling of several components: LFG generation, energy recovery processes, fleet operations, economic feasibility, and decision-making. The economic feasibility considers factors such as capital, maintenance, operational, and fuel costs, emissions and tax benefits, and the sale of products such as surplus LNG and food-grade carbon dioxide (CO2). Texas was used as a case study. The 96 landfills in Texas were prioritized and 17 landfills were identified that showed potential for converting LFG to LNG for use as a refuse truck fuel. The methodology was applied to a pilot landfill in El Paso, TX. The analysis showed that converting LFG to LNG to fuel refuse trucks proved to be the most feasible option and that the methodology can be applied for any landfill that considers this option.

Truck Roll Stability Data Collection and Analysis

Energy Technology Data Exchange (ETDEWEB)

Stevens, SS

2001-07-02

The principal objective of this project was to collect and analyze vehicle and highway data that are relevant to the problem of truck rollover crashes, and in particular to the subset of rollover crashes that are caused by the driver error of entering a curve at a speed too great to allow safe completion of the turn. The data are of two sorts--vehicle dynamic performance data, and highway geometry data as revealed by vehicle behavior in normal driving. Vehicle dynamic performance data are relevant because the roll stability of a tractor trailer depends both on inherent physical characteristics of the vehicle and on the weight and distribution of the particular cargo that is being carried. Highway geometric data are relevant because the set of crashes of primary interest to this study are caused by lateral acceleration demand in a curve that exceeds the instantaneous roll stability of the vehicle. An analysis of data quality requires an evaluation of the equipment used to collect the data because the reliability and accuracy of both the equipment and the data could profoundly affect the safety of the driver and other highway users. Therefore, a concomitant objective was an evaluation of the performance of the set of data-collection equipment on the truck and trailer. The objective concerning evaluation of the equipment was accomplished, but the results were not entirely positive. Significant engineering apparently remains to be done before a reliable system can be fielded. Problems were identified with the trailer to tractor fiber optic connector used for this test. In an over-the-road environment, the communication between the trailer instrumentation and the tractor must be dependable. In addition, the computer in the truck must be able to withstand the rigors of the road. The major objective--data collection and analysis--was also accomplished. Using data collected by instruments on the truck, a ''bad-curve'' database can be generated. Using

Medium Truck Duty Cycle Data from Real-World Driving Environments: Final Report

Energy Technology Data Exchange (ETDEWEB)

Lascurain, Mary Beth [ORNL; Franzese, Oscar [ORNL; Capps, Gary J [ORNL; Siekmann, Adam [ORNL; Thomas, Neil [ORNL; LaClair, Tim J [ORNL; Barker, Alan M [ORNL; Knee, Helmut E [ORNL

2012-11-01

Since the early part of the 20th century, the US trucking industry has provided a safe and economical means of moving commodities across the country. At present, nearly 80% of US domestic freight movement involves the use of trucks. The US Department of Energy (DOE) is spearheading a number of research efforts to improve heavy vehicle fuel efficiencies. This includes research in engine technologies (including hybrid and fuel cell technologies), lightweight materials, advanced fuels, and parasitic loss reductions. In addition, DOE is developing advanced tools and models to support heavy vehicle research and is leading the 21st Century Truck Partnership and the SuperTruck development effort. Both of these efforts have the common goal of decreasing the fuel consumption of heavy vehicles. In the case of SuperTruck, a goal of improving the overall freight efficiency of a combination tractor-trailer has been established. This Medium Truck Duty Cycle (MTDC) project is a critical element in DOE s vision for improved heavy vehicle energy efficiency; it is unique in that there is no other existing national database of characteristic duty cycles for medium trucks based on collecting data from Class 6 and 7 vehicles. It involves the collection of real-world data on medium trucks for various situational characteristics (e.g., rural/urban, freeway/arterial, congested/free-flowing, good/bad weather) and looks at the unique nature of medium trucks drive cycles (stop-and-go delivery, power takeoff, idle time, short-radius trips). This research provides a rich source of data that can contribute to the development of new tools for FE and modeling, provide DOE a sound basis upon which to make technology investment decisions, and provide a national archive of real-world-based medium-truck operational data to support energy efficiency research. The MTDC project involved a two-part field operational test (FOT). For the Part-1 FOT, three vehicles each from two vocations (urban transit and

An analysis of the lifestyle risk factors for long-distance truck drivers / Barend Koortzen von Wielligh

OpenAIRE

Von Wielligh, Barend Koortzen

2014-01-01

The Road Freight Industry accounts for 1 to 5 percent of most countries GDP (AECOM International Development, 2011). According to e-Natis there was 321 056 Trucks (Heavy load Vehicle GVM > 3500 kg) in South Africa by November 2009 (Arrive Alive, 2009). This relative big industry, according to the statistics, influences most other industries value chains. Vehicles are driven by trucks drivers, making driving trucks their living. These drivers have their own lifestyles and ways that they go abo...

Market capitalization of the trucking industry sector, 2005

Science.gov (United States)

2006-08-01

This report focuses on the market valuation of the overall trucking industry sector and each segment within it. In the past, while the focus has been on stock price appreciation or depreciation, this report emphasizes market capitalization returns. S...

Landfills - LANDFILL_BOUNDARIES_IDEM_IN: Waste Site Boundaries in Indiana (Indiana Department of Environmental Management, Polygon Shapefile)

Data.gov (United States)

NSGIC State | GIS Inventory — LANDFILL_BOUNDARIES_IDEM_IN.SHP is a polygon shapefile that contains boundaries for open dump sites, approved landfills, and permitted landfills in Indiana, provided...

A MECHANISTIC-EMPIRICAL IMPACT ANALYSIS OF DIFFERENT TRUCK CONFIGURATIONS ON A JOINTED PLAIN CONCRETE PAVEMENT (JPCP

Directory of Open Access Journals (Sweden)

Lubinda F. Walubita

2017-12-01

Full Text Available Until the last decade, the 1993 American Association of State Highway and Transportation Officials (AASHTO design guide has been traditionally used for the design of flexible and rigid pavements in the USA and some parts of the world. However, because of its inability to meet the new traffic and material challenges, a Mechanistic Empirical Pavement Design Guide (MEPDG was introduced based on an NCHRP 1-37 A study conducted in 2004. This study used the MEPDG software and associated models to determine, through comparative truck damage analysis, the effects of nine different truck configurations on a 12 inch-jointed plain concrete pavement (JPCP. The study recorded truck damages at the end of each analysis period (40 years and comparatively analyzed the relative pavement damage in terms of fatigue cracking, faulting, and surface roughness. The results indicated that the most critical damage to the concrete pavement was caused by truck cases with high and uneven load distribution and relatively smaller size axles group (e.g. tandem. Other key findings included the following; (1 increase in damage when the truckloads were shifted between the same size axles, (2 decrease in truck damage when the truckloads were shifted from tandem axle to quad axles, and (3 no change in truck damage when the axle spacing was increased between wheels of a quad axle.

Cummins L10G in Kenworth truck 'viable today'

International Nuclear Information System (INIS)

Anon.

1996-01-01

As the culmination of five years of developmental work by Cummins Engines, BC Research Inc., and BC Gas Utility Ltd., a T800 Kenworth truck was outfitted with a new Cummins L10G natural gas engine, and two lightweight fully -wrapped Dynetek cylinders; it was pronounced to be 'a viable clean truck today'. The L10G spark-ignited engine operates at a relatively high peak efficiency of 37 per cent and is commercially available to meet the current California Air Resources Board heavy duty vehicle emission standards without the use of a catalytic converter. The L10G engine produces no particulate emissions, a very significant advantage, in view of the fact that particulate emissions have been identified as major contributors to respiratory ailments

Antecedents of Truck Drivers’ Job Satisfaction and Retention Proneness

DEFF Research Database (Denmark)

Prockl, Günter; Teller, Christoph; Kotzab, Herbert

2017-01-01

is statistically significant. Financial and nonfinancial job properties affect satisfaction with one's employer whereas the former shows a lower impact compared to the latter. Satisfaction with the job and one's employer impacts retention proneness. The contribution of this study was to (1) add...... to the understanding of the factors that predict retention of truck drivers in relationship to job satisfaction and (2) highlight the different roles of financial and nonfinancial job properties in this specific work context.......The aim of this study was to (1) explore the antecedents of truck drivers’ job satisfaction, (2) identify the impact of financial and nonfinancial job properties on satisfaction with the job and with one's employer, and (3) the drivers’ proneness to retaining their jobs. Based on the extant...

Analysis Of Inland Waterway Transport For Container Shipping: Cikarang To Port Of TanjungPriok

Science.gov (United States)

Achmadi, T.; Nur, H. I.; Rahmadhon, L. R.

2018-03-01

Industry's development which is in the center of Cikarang's industrial estate causes a considerable increase from 7% to 13% of container's flow from and to Port of Tanjung Priok per year. Therefore, those obstacles rise the number of traffic congestion and transport cost. This research aims to analyze the potential alternative of transportation in order to transport containers at the route of Tanjung Priok to Cikarang utilizing Inland Waterways Transport through Cikarang Bekasi Laut (CBL) river. This research will be conducted by comparing component of total logistic cost that emerging caused by container trucks and vessels. Self Propelled Container Barge (SPCB) is a pointed alternative transportation in which it is used to transport containers through the waterways. The result of analysis obtained that the capacity of Cikarang Bekasi Laut river is 18,558 roundtrip per year. Furthermore, the collaboration of 3 SPCB operations, as well payload 32 TEUS can decrease the amount of road traffic congestion/density of Cikarang-Port of Tanjung Priok as much as 18.6%. The cost of containers shipping per unit transported by truck is IDR 2.2 Million per TEUs, whereas containers shipping transported by Inland Waterways cost only IDR 1.8 Million per TEUs.

Case Study: Natural Gas Regional Transport Trucks

Energy Technology Data Exchange (ETDEWEB)

Laughlin, M.; Burnham, A.

2016-08-01

Learn about Ryder System, Inc.'s experience in deploying nearly 200 CNG and LNG heavy-duty trucks and construction and operation of L/CNG stations using ARRA funds. Using natural gas in its fleet, Ryder mitigated the effects of volatile fuel pricing and reduced lifecycle GHGs by 20% and petroleum by 99%.

Effects of Particle Filters and Selective Catalytic Reduction on In-Use Heavy-Duty Diesel Truck Emissions

Science.gov (United States)

Preble, C.; Cados, T.; Harley, R.; Kirchstetter, T.

2016-12-01

Heavy-duty diesel trucks (HDDT) are a major source of nitrogen oxides (NOx) and black carbon (BC) in urban environments, contributing to persistent ozone and particulate matter air quality problems. Diesel particle filters (DPFs) and selective catalytic reduction (SCR) systems that target PM and NOx emissions, respectively, have recently become standard equipment on new HDDT. DPFs can also be installed on older engines as a retrofit device. Previous work has shown that DPF and SCR systems can reduce NOx and BC emissions by up to 70% and 90%, respectively, compared to modern trucks without these after-treatment controls (Preble et al., ES&T 2015). DPFs can have the undesirable side-effect of increasing ultrafine particle (UFP) and nitrogen dioxide (NO2) emissions. While SCR systems can partially mitigate DPF-related NO2 increases, these systems can emit nitrous oxide (N2O), a potent greenhouse gas. We report new results from a study of HDDT emissions conducted in fall 2015 at the Port of Oakland and Caldecott Tunnel in California's San Francisco Bay Area. We report pollutant emission factors (g kg-1) for emitted NOx, NO2, BC, PM2.5, UFP, and N2O on a truck-by-truck basis. Using a roadside license plate recognition system, we categorize each truck by its engine model year and installed after-treatment controls. From this, we develop emissions profiles for trucks with and without DPF and SCR. We evaluate the effectiveness of these devices as a function of their age to determine whether degradation is an issue. We also compare the emission profiles of trucks traveling at low speeds along a level, arterial road en route to the port and at high speeds up a 4% grade highway approaching the tunnel. Given the climate impacts of BC and N2O, we also examine the global warming potential of emissions from trucks with and without DPF and SCR.

Carbon and energy footprints of electric delivery trucks:a hybrid multi-regional input-output life cycle assessment

OpenAIRE

Zhao, Yang; Onat, Nuri Cihat; Küçükvar, Murat; Tatari, Ömer

2016-01-01

Due to frequent stop-and-go operation and long idling periods when driving in congested urban areas, the electrification of commercial delivery trucks has become an interesting topic nationwide. In this study, environmental impacts of various alternative delivery trucks including battery electric, diesel, diesel-electric hybrid, and compressed natural gas trucks are analyzed. A novel life cycle assessment method, an environmentally-extended multi-region input-output analysis, is utilized to c...

Exhaust Fine Particle and Nitrogen Oxide Emissions from Individual Heavy-Duty Trucks at the Port of Oakland

Science.gov (United States)

Dallmann, T. R.; Harley, R. A.; Kirchstetter, T.

2010-12-01

Heavy-duty (HD) diesel trucks are a source of nitrogen oxide (NOx) emissions as well as primary fine particulate matter (PM2.5) that includes black carbon (BC) as a major component. Heavy-duty trucks contribute significantly to elevated levels of diesel particulate matter found near highways and in communities surrounding major freight-handling facilities. To reduce the air quality impact of diesel engine emissions, the California Air Resources Board has adopted new rules requiring the retrofit or replacement of in-use HD trucks. These rules take effect during 2010 at ports and railyards, and apply to all trucks operating in California by 2014. This study involves on-road measurements of PM2.5, BC, and NOx emission factor distributions from individual HD trucks driving into the Port of Oakland in the San Francisco Bay area. Measurements of exhaust plumes from individual trucks were made using a mobile laboratory equipped with fast time response (1 Hz) PM2.5, BC, NOx, and carbon dioxide (CO2) sensors. The mobile laboratory was stationed on an overpass above an arterial roadway that connects the Port to a nearby highway (I-880). The air sampling inlet was thereby located above the vertical exhaust pipes of HD diesel trucks passing by on the arterial roadway below. Fuel-specific PM2.5, BC, and NOx emission factors for individual trucks were calculated using a carbon balance method in which concentrations of these species in an exhaust plume are normalized to CO2 concentrations. Initial field sampling was conducted in November, 2009 prior to the implementation of new emission rules. Additional emission measurements were made at the same location during June 2010 and emission factor distributions and averages will be compared.

FedEx Gasoline Hybrid Electric Delivery Truck Evaluation: 6-Month Interim Report

Energy Technology Data Exchange (ETDEWEB)

Barnitt, R.

2010-05-01

This interim report presents partial (six months) results for a technology evaluation of gasoline hybrid electric parcel delivery trucks operated by FedEx in and around Los Angeles, CA. A 12 month in-use technology evaluation comparing in-use fuel economy and maintenance costs of GHEVs and comparative diesel parcel delivery trucks was started in April 2009. Comparison data was collected and analyzed for in-use fuel economy and fuel costs, maintenance costs, total operating costs, and vehicle uptime. In addition, this interim report presents results of parcel delivery drive cycle collection and analysis activities as well as emissions and fuel economy results of chassis dynamometer testing of a gHEV and a comparative diesel truck at the National Renewable Energy Laboratory's (NREL) ReFUEL laboratory. A final report will be issued when 12 months of in-use data have been collected and analyzed.

Driving fatigue in professional drivers: a survey of truck and taxi drivers.

Science.gov (United States)

Meng, Fanxing; Li, Shuling; Cao, Lingzhi; Li, Musen; Peng, Qijia; Wang, Chunhui; Zhang, Wei

2015-01-01

Fatigue among truck drivers has been studied extensively; however, less is known regarding the fatigue experience of taxi drivers in heavily populated metropolitan areas. This study aimed to compare the differences and similarities between truck and taxi driver fatigue to provide implications for the fatigue management and education of professional drivers. A sample of 274 truck drivers and 286 taxi drivers in Beijing was surveyed via a questionnaire, which included items regarding work characteristics, fatigue experience, accident information, attitude toward fatigue, and methods of counteracting fatigue. Driver fatigue was prevalent among professional drivers, and it was even more serious for taxi drivers. Taxi drivers reported more frequent fatigue experiences and were involved in more accidents. Among the contributing factors to fatigue, prolonged driving time was the most important factor identified by both driver groups. Importantly, the reason for the engagement in prolonged driving was neither due to the lack of awareness concerning the serious outcome of fatigue driving nor because of their poor detection of fatigue. The most probable reason was the optimism bias, as a result of which these professional drivers thought that fatigue was more serious for other drivers than for themselves, and they thought that they were effective in counteracting the effect of fatigue on their driving performance. Moreover, truck drivers tended to employ methods that require stopping to counteract fatigue, whereas taxi drivers preferred methods that were simultaneous with driving. Although both driver groups considered taking a nap as one of the most effective means to address fatigue, this method was not commonly used. Interestingly, these drivers were aware that the methods they frequently used were not the most effective means to counteract fatigue. This study provides knowledge on truck and taxi drivers' characteristics in fatigue experience, fatigue attitude, and

GA-4/GA-9 legal weight truck from reactor spent fuel shipping casks

International Nuclear Information System (INIS)

1990-04-01

The preliminary design report presents the results of General Atomics (GA) preliminary design effort to develop weight truck from reactor spent fuel shipping casks. The thermal evaluation of the Office of Civilian Radioactive Waste Management (OCRWM) cask considered normal and hypothetical accident conditions of transport. We employed analytical modeling as well as fire testing of the neutron shielding material to perform the evaluation. This document addresses the thermal design features of the cask, discusses thermal criteria, and summarizes the results of the thermal evaluation, as well as results of structural containment and nuclear evaluations that support the design. Also included are the results of trade-off studies. 69 refs., 103 figs., 76 tabs

Creating technological boundaries to protect bedtime: examining work-home boundary management, psychological detachment and sleep.

Science.gov (United States)

Barber, Larissa K; Jenkins, Jade S

2014-08-01

This study examined the mechanism by which information and communication technology (ICT) use at home for work purposes may affect sleep. In this investigation, data from 315 employees were used to examine the indirect effect of ICT use at home on sleep outcomes through psychological detachment, and how boundary creation may moderate this effect. Results revealed the indirect effect of increased work-home boundary crossing on sleep (quantity, quality and consistency) through psychological detachment occurred only among individuals with low boundaries around ICT use and not among those with high boundaries. These results suggest that creating boundaries around work-relevant ICT use while at home is beneficial to sleep as a recovery process through being able to psychologically disengage from work. Copyright © 2013 John Wiley & Sons, Ltd.

Supporting Youth Boundary Crossing – Intertextuality as a Component of Design for Information and Visual Literacy

Directory of Open Access Journals (Sweden)

Kristen Radcliff Clark

2009-12-01

Full Text Available This article charts attempts to derive a theoretically guided approach to engaging children in boundary crossing toward literacies and practices associated with the Age of Information. Using Fifth Dimension (5D afterschool programs as laboratories for informal learning design, interventions were designed to explore the extent to which youth cultures and literacies can be used as intertextual gateways to more educative practices associated with visual and information literacy. Intertextuality is introduced as a concept to consider the relevance of using semantic relationships between popular and educative texts to inform learning design for afterschool programming.

Boundary maps for C*-crossed products with R with an application to the quantum Hall effect

CERN Document Server

Kellendonk, J

2003-01-01

The boundary map in K-theory arising from the Wiener-Hopf extension of a crossed product algebra with $\\RR$ is the Connes-Thom isomorphism. In this article, the Wiener Hopf extension is combined with the Heisenberg group algebra to provide an elementary construction of a corresponding map in cyclic cohomology. It then follows directly from a non-commutative Stokes theorem that this map is dual w.r.t. Connes' pairing of cyclic cohomology with K-theory. As an application, we prove equality of quantized bulk and edge conductivities for the integer quantum Hall effect described by continuous magnetic Schrödinger operators.

Impact of trucking network flow on preferred biorefinery locations in the southern United States

Science.gov (United States)

Timothy M. Young; Lee D. Han; James H. Perdue; Stephanie R. Hargrove; Frank M. Guess; Xia Huang; Chung-Hao Chen

2017-01-01

The impact of the trucking transportation network flow was modeled for the southern United States. The study addresses a gap in existing research by applying a Bayesian logistic regression and Geographic Information System (GIS) geospatial analysis to predict biorefinery site locations. A one-way trucking cost assuming a 128.8 km (80-mile) haul distance was estimated...

Boundary of the State of Iowa

Data.gov (United States)

Iowa State University GIS Support and Research Facility — This coverage contains polygons representing the Iowa Boundary, it was derived from a coverage of county boundaries, called COUNTIES, of the state of Iowa. COUNTIES...

Commercial Truck Driver Health and Safety: Exploring Distracted Driving Performance and Self-Reported Driving Skill.

Science.gov (United States)

Stavrinos, Despina; Heaton, Karen; Welburn, Sharon C; McManus, Benjamin; Griffin, Russell; Fine, Philip R

2016-08-01

Reducing distracters detrimental to commercial truck driving is a critical component of improving the safety performance of commercial drivers, and makes the highways safer for all drivers. This study used a driving simulator to examine effects of cell phone, texting, and email distractions as well as self-reported driver optimism bias on the driving performance of commercial truck drivers. Results revealed that more visually demanding tasks were related to poorer driving performance. However, the cell phone task resulted in less off-the-road eye glances. Drivers reporting being "very skilled" displayed poorer driving performance than those reporting being "skilled." Onboard communication devices provide a practical, yet visually and manually demanding, solution for connecting drivers and dispatchers. Trucking company policies should minimize interaction between dispatchers and drivers when the truck is in motion. Training facilities should integrate driving simulators into the instruction of commercial drivers, targeting over-confident drivers. © 2016 The Author(s).

Hair receptor sensitivity to changes in laminar boundary layer shape

International Nuclear Information System (INIS)

Dickinson, B T

2010-01-01

Biologists have shown that bat wings contain distributed arrays of flow-sensitive hair receptors. The hair receptors are hypothesized to feedback information on airflows over the bat wing for enhanced stability or maneuverability during flight. Here, we study the geometric specialization of hair-like structures for the detection of changes in boundary layer velocity profiles (shapes). A quasi-steady model that relates the flow velocity profile incident on the longitudinal axis of a hair to the resultant moment and shear force at the hair base is developed. The hair length relative to the boundary layer momentum thickness that maximizes the resultant moment and shear-force sensitivity to changes in boundary layer shape is determined. The sensitivity of the resultant moment and shear force is shown to be highly dependent on hair length. Hairs that linearly taper to a point are shown to provide greater output sensitivity than hairs of uniform cross-section. On an order of magnitude basis, the computed optimal hair lengths are in agreement with the range of hair receptor lengths measured on individual bat species. These results support the hypothesis that bats use hair receptors for detecting changes in boundary layer shape and provide geometric guidelines for artificial hair sensor design and application.

U10 : Trusted Truck(R) II (phase B).

Science.gov (United States)

2009-01-01

Phase B of the Trusted Truck II project built on the system developed in Phase A (or Year 1). For the implementation portion of the project, systems were added to the trailer to provide additional diagnostic trailer data that can be sent to the TTM...

A Qualitative Study of Migrant-related Stressors, Psychosocial Outcomes and HIV Risk Behavior among Truck Drivers in Zambia

Science.gov (United States)

Ncube, Nomagugu; Simona, Simona J.; Kansankala, Brian; Sinkala, Emmanuel; Raidoo, Jasmin

2017-01-01

Truck drivers are part of mobile populations which have been noted as a key population at risk of HIV in Zambia. This study was aimed at 1) determining Potentially Traumatic Events (PTEs), labor migrant-related stressors, psychosocial problems and HIV risk behaviors among truck drivers in Zambia and 2) examining the relationship between PTEs, migrant-related stressors, psychosocial outcomes and HIV sexual risk behavior among truck drivers in Zambia. We conducted fifteen semi-structured interviews with purposively sampled male truck drivers at trucking companies in Lusaka, Zambia. Findings indicate that truck drivers experience multiple stressors and potentially traumatic incidences, including delays and long waiting hours at borders, exposure to crime and violence, poverty, stress related to resisting temptation of sexual interactions with sex workers or migrant women, and job-related safety concerns. Multiple psychosocial problems such as intimate partner violence, loneliness, anxiety and depression-like symptoms were noted. Transactional sex, coupled with inconsistent condom use were identified as HIV sexual risk behaviors. Findings suggest the critical need to develop HIV prevention interventions which account for mobility, potentially traumatic events, psychosocial problems, and the extreme fear of HIV testing among this key population. PMID:27681145

Factors affecting driver alertness during the operation of haul trucks in the South African mining industry

CSIR Research Space (South Africa)

Schutte, PC

2003-06-01

Full Text Available In view of the seriousness of haul trucks accidents, SIMRAC initiated research to identify factors affecting haul truck driver alertness during mining operations. The information obtained during the risk analysis was used to identify possible...

Health Promotion at the Construction Work Site: The Lunch Truck Pilot Study.

Science.gov (United States)

Caban-Martinez, Alberto J; Moore, Kevin J; Clarke, Tainya C; Davila, Evelyn P; Clark, John D; Lee, David J; Fleming, Lora E

2018-04-01

The transient nature of construction work makes it difficult to conduct longitudinal worksite-based health promotion activities. As part of a workplace health assessment pilot study, we worked with a commercial lunch truck company to disseminate four types of health education materials including cancer screening, workplace injury prevention, fruit and vegetable consumption, and smoking cessation to construction workers purchasing food items from the truck during their job breaks. Two weeks following the worksite assessment, we followed up with these workers to ascertain their use of the health promotion materials. Of the 54 workers surveyed, 83% reported reviewing and sharing the cancer screening materials with their families, whereas 44% discussed the cancer screening materials with coworkers. Similar proportions of workers reviewed, shared, and discussed the other health promotion materials with their family. Lunch trucks may be an effective strategy and delivery method for educating construction workers on healthy behaviors and injury prevention practices.

Polymeric micelles with ionic cores containing biodegradable cross-links for delivery of chemotherapeutic agents.

Science.gov (United States)

Kim, Jong Oh; Sahay, Gaurav; Kabanov, Alexander V; Bronich, Tatiana K

2010-04-12

Novel functional polymeric nanocarriers with ionic cores containing biodegradable cross-links were developed for delivery of chemotherapeutic agents. Block ionomer complexes (BIC) of poly(ethylene oxide)-b-poly(methacylic acid) (PEO-b-PMA) and divalent metal cations (Ca(2+)) were utilized as templates. Disulfide bonds were introduced into the ionic cores by using cystamine as a biodegradable cross-linker. The resulting cross-linked micelles with disulfide bonds represented soft, hydrogel-like nanospheres and demonstrated a time-dependent degradation in the conditions mimicking the intracellular reducing environment. The ionic character of the cores allowed to achieve a very high level of doxorubicin (DOX) loading (50% w/w) into the cross-linked micelles. DOX-loaded degradable cross-linked micelles exhibited more potent cytotoxicity against human A2780 ovarian carcinoma cells as compared to micellar formulations without disulfide linkages. These novel biodegradable cross-linked micelles are expected to be attractive candidates for delivery of anticancer drugs.

Truck-based mobile wireless sensor networks for the experimental observation of vehicle–bridge interaction

International Nuclear Information System (INIS)

Kim, Junhee; Lynch, Jerome P; Lee, Jong-Jae; Lee, Chang-Geun

2011-01-01

Heavy vehicles driving over a bridge create a complex dynamic phenomenon known as vehicle–bridge interaction. In recent years, interest in vehicle–bridge interaction has grown because a deeper understanding of the phenomena can lead to improvements in bridge design methods while enhancing the accuracy of structural health monitoring techniques. The mobility of wireless sensors can be leveraged to directly monitor the dynamic coupling between the moving vehicle and the bridge. In this study, a mobile wireless sensor network is proposed for installation on a heavy truck to capture the vertical acceleration, horizontal acceleration and gyroscopic pitching of the truck as it crosses a bridge. The vehicle-based wireless monitoring system is designed to interact with a static, permanent wireless monitoring system installed on the bridge. Specifically, the mobile wireless sensors time-synchronize with the bridge's wireless sensors before transferring the vehicle response data. Vertical acceleration and gyroscopic pitching measurements of the vehicle are combined with bridge accelerations to create a time-synchronized vehicle–bridge response dataset. In addition to observing the vehicle vibrations, Kalman filtering is adopted to accurately track the vehicle position using the measured horizontal acceleration of the vehicle and positioning information derived from piezoelectric strip sensors installed on the bridge deck as part of the bridge monitoring system. Using the Geumdang Bridge (Korea), extensive field testing of the proposed vehicle–bridge wireless monitoring system is conducted. Experimental results verify the reliability of the wireless system and the accuracy of the vehicle positioning algorithm

Overweight truck shipments to nuclear waste repositories: legal, political, administrative and operational considerations

International Nuclear Information System (INIS)

1986-03-01

This report, prepared for the Chicago Operations Office and the Office of Civilian Radioactive Waste Management (OCRWM) of the US Department of Energy (DOE), identifies and analyzes legal, political, administrative, and operational issues that could affect an OCRWM decision to develop an overweight truck cask fleet for the commercial nuclear waste repository program. It also provides information required by DOE on vehicle size-and-weight administration and regulation, pertinent to nuclear waste shipments. Current legal-weight truck casks have a payload of one pressurized-water reactor spent fuel element or two boiling-water reactor spent fuel elements (1 PWR/2 BWR). For the requirements of the 1960s and 1970s, casks were designed with massive shielding to accommodate 6-month-old spent fuel; the gross vehicle weight was limited to 73,280 pounds. Spent fuel to be moved in the 1990s will have aged five years or more. Gross vehicle weight limitation for the Interstate highway system has been increased to 80,000 pounds. These changes allow the design of 25-ton legal-weight truck casks with payloads of 2 PWR/5 BWR. These changes may also allow the development of a 40-ton overweight truck cask with a payload of 4 PWR/10 BWR. Such overweight casks will result in significantly fewer highway shipments compared with legal-weight casks, with potential reductions in transport-related repository risks and costs. These advantages must be weighed against a number of institutional issues surrounding such overweight shipments before a substantial commitment is made to develop an overweight truck cask fleet. This report discusses these issues in detail and provides recommended actions to DOE

Analytical approach to determine vertical dynamics of a semi-trailer truck from the point of view of goods protection

Science.gov (United States)

Pidl, Renáta

2018-01-01

The overwhelming majority of intercontinental long-haul transportations of goods are usually carried out on road by semi-trailer trucks. Vibration has a major effect regarding the safety of the transport, the load and the transported goods. This paper deals with the logistics goals from the point of view of vibration and summarizes the methods to predict or measure the vibration load in order to design a proper system. From these methods, the focus of this paper is on the computer simulation of the vibration. An analytical method is presented to calculate the vertical dynamics of a semi-trailer truck containing general viscous damping and exposed to harmonic base excitation. For the purpose of a better understanding, the method will be presented through a simplified four degrees-of-freedom (DOF) half-vehicle model, which neglects the stiffness and damping of the tires, thus the four degrees-of-freedom are the vertical and angular displacements of the truck and the trailer. From the vertical and angular accelerations of the trailer, the vertical acceleration of each point of the platform of the trailer can easily be determined, from which the forces acting on the transported goods are given. As a result of this paper the response of the full platform-load-packaging system to any kind of vehicle, any kind of load and any kind of road condition can be analyzed. The peak acceleration of any point on the platform can be determined by the presented analytical method.

Application of Sleeper Cab Thermal Management Technologies to Reduce Idle Climate Control Loads in Long-Haul Trucks

Energy Technology Data Exchange (ETDEWEB)

Lustbader, J. A.; Venson, T.; Adelman, S.; Dehart, C.; Yeakel, S.; Castillo, M. S.

2012-10-01

Each intercity long-haul truck in the U.S. idles approximately 1,800 hrs per year, primarily for sleeper cab hotel loads. Including workday idling, over 2 billion gallons of fuel are used annually for truck idling. NREL's CoolCab project works closely with industry to design efficient thermal management systems for long-haul trucks that keep the cab comfortable with minimized engine idling and fuel use. The impact of thermal load reduction technologies on idle reduction systems were characterized by conducting thermal soak tests, overall heat transfer tests, and 10-hour rest period A/C tests. Technologies evaluated include advanced insulation packages, a solar reflective film applied to the vehicle's opaque exterior surfaces, a truck featuring both film and insulation, and a battery-powered A/C system. Opportunities were identified to reduce heating and cooling loads for long-haul truck idling by 36% and 34%, respectively, which yielded a 23% reduction in battery pack capacity of the idle-reduction system. Data were also collected for development and validation of a CoolCalc HVAC truck cab model. CoolCalc is an easy-to-use, simplified, physics-based HVAC load estimation tool that requires no meshing, has flexible geometry, excludes unnecessary detail, and is less time-intensive than more detailed computer-aided engineering modeling approaches.

Fragility Modeling of Aging Containment Metallic Pressure Boundaries

International Nuclear Information System (INIS)

Cherry, J.L.; Ellingwood, B.R.

1999-01-01

The containment in a nuclear power plant (NPP) provides a barrier against the release of radioactivity in the event of an accident. Corrosion that has been observed in some steel containments and liners of reinforced concrete containments has raised questions about their ability to perform this function. The performance of corroded containments during events at or beyond the design basis is impacted by numerous sources of uncertainty. A fragility model of the containment provides a relatively simple depiction of the impact of uncertainties on structural performance and a basis for decision-making in the presence of uncertainty. Moreover, it is a necessary ingredient of any time-dependent structural reliability analysis. A nonlinear finite element analysis of containment response furnishes the necessary platform to perform numerical experiments to determine containment fragility. A statistically-based sampling plan minimizes the finite element computations required to develop the fragility curve. The -percentile (or other fractile) then gives a statistically based indication of the lower bound on containment capacity, and can be used as a screening tool to determine whether more refined further analysis or tests to support service life evaluations are warranted

An exploratory study of long-haul truck drivers' secondary tasks and reasons for performing them.

Science.gov (United States)

Iseland, Tobias; Johansson, Emma; Skoog, Siri; Dåderman, Anna M

2018-08-01

Research on drivers has shown how certain visual-manual secondary tasks, unrelated to driving, increase the risk of being involved in crashes. The purpose of the study was to investigate (1) if long-haul truck drivers in Sweden engage in secondary tasks while driving, what tasks are performed and how frequently, (2) the drivers' self-perceived reason/s for performing them, and (3) if psychological factors might reveal reasons for their engaging in secondary tasks. The study comprised 13 long-haul truck drivers and was conducted through observations, interviews, and questionnaires. The drivers performed secondary tasks, such as work environment related "necessities" (e.g., getting food and/or beverages from the refrigerator/bag, eating, drinking, removing a jacket, face rubbing, and adjusting the seat), interacting with a mobile phone/in-truck technology, and doing administrative tasks. The long-haul truck drivers feel bored and use secondary tasks as a coping strategy to alleviate boredom/drowsiness, and for social interaction. The higher number of performed secondary tasks could be explained by lower age, shorter driver experience, less openness to experience, lower honesty-humility, lower perceived stress, lower workload, and by higher health-related quality of life. These explanatory results may serve as a starting point for further studies on large samples to develop a safer and healthier environment for long-haul truck drivers. Copyright © 2018. Published by Elsevier Ltd.

Russian Containers for Transportation of Solid Radioactive Waste

International Nuclear Information System (INIS)

Petrushenko, V. G.; Baal, E. P.; Tsvetkov, D. Y.; Korb, V. R.; Nikitin, V. S.; Mikheev, A. A.; Griffith, A.; Schwab, P.; Nazarian, A.

2002-01-01

The Russian Shipyard ''Zvyozdochka'' has designed a new container for transportation and storage of solid radioactive wastes. The PST1A-6 container is cylindrical shaped and it can hold seven standard 200-liter (55-gallon) drums. The steel wall thickness is 6 mm, which is much greater than standard U.S. containers. These containers are fully certified to the Russian GOST requirements, which are basically identical to U.S. and IAEA standards for Type A containers. They can be transported by truck, rail, barge, ship, or aircraft and they can be stacked in 6 layers in storage facilities. The first user of the PST1A-6 containers is the Northern Fleet of the Russian Navy, under a program sponsored jointly by the U.S. DoD and DOE. This paper will describe the container design and show how the first 400 containers were fabricated and certified

Role of sensory and cognitive conspicuity in the prevention of collisions between motorcycles and trucks at T-intersections.

Science.gov (United States)

Law, Teik Hua; Ghanbari, Mahshid; Hamid, Hussain; Abdul-Halin, Alfian; Ng, Choy Peng

2016-11-01

Motorcyclists are particularly vulnerable to injury in crashes with heavy vehicles due to substantial differences in vehicle mass, the degree of protection and speed. There is a considerable difference in height between motorcycles and trucks; motorcycles are viewed by truck drivers from downward angles, and shorter distances between them mean steeper downward angles. Hence, we anticipated that the effects of motorcycle conspicuity treatments would be different for truck drivers. Therefore, this study aims to evaluate the effects of motorcycle conspicuity treatments on the identification and detection of motorcycles by truck drivers. Two complementary experiments were performed; the first experiment assessed the impact of motorcycle sensory conspicuity on the ability of un-alerted truck drivers to detect motorcycles, and the second experiment assessed the motorcycle cognitive conspicuity to alerted truck drivers. The sensory conspicuity was measured in terms of motorcycle detection rates by un-alerted truck drivers when they were not anticipating a motorcycle within a realistic driving scene, while the cognitive conspicuity was determined by the time taken by alerted truck drivers to actively search for a motorcycle. In the first experiment, the participants were presented with 10 pictures and were instructed to report the kinds of vehicles that were presented in the pictures. Each picture was shown to the participants for 600ms. In the second experiment, the participants were presented with the same set of pictures and were instructed to respond by clicking the right button on a mouse as soon as they detected a motorcycle in the picture. The results indicate that the motorcycle detection rate increases, and the response time to search for a motorcycle decreases, as the distance between the targeted motorcycle and the viewer decreases. This is true regardless of the type of conspicuity treatment used. The use of daytime running headlights (DRH) was found to

Thermodynamic Bethe ansatz for boundary sine-Gordon model

International Nuclear Information System (INIS)

Lee, Taejun; Rim, Chaiho

2003-01-01

(R-channel) TBA is elaborated to find the effective central charge dependence on the boundary parameters for the massless boundary sine-Gordon model with the coupling constant (8π)/β 2 =1+λ with λ a positive integer. Numerical analysis of the massless boundary TBA demonstrates that at an appropriate boundary parameter range (cusp point) there exists a singularity crossing phenomena and this effect should be included in TBA to have the right behavior of the effective central charge

Estimating the supply and demand for commercial heavy truck parking on interstate highways : a case study of I-81 in Virginia.

Science.gov (United States)

2002-01-01

The increasing number of trucks traveling on Virginia highways has led to a growing demand for public rest areas and private truck stops. This study developed a methodology to determine the supply and demand for commercial heavy truck parking using I...

Methods of rational fuel consumption by the dump trucks in deep pits

Directory of Open Access Journals (Sweden)

Yu. I. Lel’

2017-12-01

Full Text Available The detailed analysis of “consumption Norms of fuel and lubricants...” has been performed. It was approved by the Ministry of transport of the Russian Federation and it is an official document for the valuation and planning of fuel consumption in road transport, including open pits. It was found that the “rate...” was deficient in the specific operating conditions of mining dump trucks and a significant discrepancy with the actual fuel consumption. To the greatest extent, these shortcomings are noticeable in deep pits. In the result of experimental and analytical studies a new method of rationing the diesel fuel consumption of mining dump trucks was developed. It is based on the calculation of fuel consumption for vehicle cycle and bringing the actual path length to the conventional horizontal transportation distances using the criterion of energy. This method requires comprehensive consideration of the design parameters of mining dump trucks – mining and road traffic conditions. As a criterion for evaluating the difficulty of transporting it justifies the use of the coefficient of difficulty of the course, showing how many times the energy consumption in the movement of trucks on the highway exceed the real energy consumption while driving on a horizontal road with the crushed-stone surface of the same length. The formulae are derived to determine the given distance of transportation on the basis of the horizontal equivalent of the vertical movement of the rock mass. It was found that the linear rate of flow of diesel fuel to mileage and transportation work under other equal conditions is determined by two main factors: the distance of transportation of L and the coefficient μ of difficulty of the course. As an example, the calculation of the linear differentiated norms of fuel consumption of dump trucks CAT 785B in an “Udachny” pit AK “ALROSA” (JSC. The developed method provides high accuracy of regulation of diesel fuel

Truck shovel users group

Energy Technology Data Exchange (ETDEWEB)

Thomas, J. [Surface Mining Association for Research and Technology, AB (Canada)

2008-07-01

The Truck Shovel Users Group (TSUG) was developed as part of the Surface Mining Association for Research and Technology (SMART), an association of companies that meet to coordinate technology developments for the mining industry. The TSUG meet regularly to discuss equipment upgrades, maintenance planning systems, and repair techniques. The group strives to maximize the value of its assets through increased safety, equipment performance and productivity. This presentation provided administrative details about the TSUG including contact details and admission costs. It was concluded that members of the group must be employed by companies that use heavy mining equipment, and must also be willing to host meetings, make presentations, and support the common goals of the group. tabs., figs.

Structural safety evaluation of the K Basin railcar and truck applications

International Nuclear Information System (INIS)

Winkel, B.V.

1995-08-01

There are two rail spurs in the storage/transfer areas of both the K East and K West fuel storage basins. These rail spurs both end at the west edge of the basins. To avoid accidental entry of a railcar into a basin, administrative procedures and rail control hardware have been provided. Based upon a combination of historical documentation and existing adminstrative controls, a maximum credible impact accident was established. Using this design basis accident, the existing rail control hardware was evaluated for structural adequacy. The K Basin rail spurs are embedded in concrete, which permits truck/trailer entry into the same area. Safety issues for truck applications are also addressed

Experimental study on transportation safety of package in side collision of heavy duty truck

International Nuclear Information System (INIS)

Suga, M.; Sasaki, T.

1989-01-01

The accidents in road transportation of package may be collision, fall and fire. It is necessary to examine all cases very carefully because collision might be caused by other vehicle. Collisions are classified into head-on collision, rear-end collision, side collision. A lot of experiments and analyses are reported on head-on collision, so the behavior of vehicle and package may be predicted without difficulty. Rear-end collisions bring about less impact and may be applied corresponding to the head-on collisions. About side collisions, few experiments or analyses are reported, and most of them are about passenger cars not about trucks. So it becomes important to study the transportation safety of package carried on a heavy duty truck when hit on the side by another truck similar in size

76 FR 22154 - Powered Industrial Trucks Standard; Extension of the Office of Management and Budget's (OMB...

Science.gov (United States)

2011-04-20

... manufacturer, paragraph (a)(5) mandates that employers provide a marker on the trucks that identifies the... markers required by paragraphs (a)(3) through (a)(5) remain affixed to trucks and are legible. Paragraphs... . Therefore, OSHA cautions commenters about submitting personal information such as social security numbers...

78 FR 26106 - Pilot Program on NAFTA Trucking Provisions

Science.gov (United States)

2013-05-03

... DEPARTMENT OF TRANSPORTATION Federal Motor Carrier Safety Administration [Docket No FMCSA-2011-0097] Pilot Program on NAFTA Trucking Provisions AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice; correction. SUMMARY: The FMCSA published a document in the Federal Register of...

The determinants of fuel use in the trucking industry - volume, fleet characteristics and the rebound effect

DEFF Research Database (Denmark)

de Borger, Bruno; Mulalic, Ismir

2012-01-01

This paper studies the determinants of fuel use in the trucking industry in Denmark, using aggregate time series data for the period 1980–2007. The model captures the main linkages between the demand for freight transport, the characteristics of the vehicle fleet, and the demand for fuel. Results...... of this effect is approximately 10% in the short run and 17% in the long run, so that a 1% improvement in fuel efficiency reduces fuel use by 0.90% (short-run) to 0.83% (long-run). Second, we find that higher fuel prices raise the average capacity of trucks, and they induce firm sto invest in newer, typically...... more fuel efficient, trucks. Third, these adjustments and the rebound effect jointly imply that the effect of higher fuel prices on fuel use in the trucking industry is fairly small; estimated price elasticities are _0:13 and _0:22 in the short run and in the long run, respectively. The empirical...

The application of smart phone, weight-mile truck data to support freight-modeling, performance measures and planning.

Science.gov (United States)

2013-08-01

Oregon is one of the few states that currently charge a commercial truck weight-mile tax (WMT). The Oregon Department of : Transportation (ODOT) has developed a data-collection system Truck Road Use Electronics (TRUE) to simplify WMT : collec...

41 CFR 50-210.1 - Coverage under the Walsh-Healey Public Contracts Act of truck drivers employed by oil dealers.

Science.gov (United States)

2010-07-01

...-Healey Public Contracts Act of truck drivers employed by oil dealers. 50-210.1 Section 50-210.1 Public...-210.1 Coverage under the Walsh-Healey Public Contracts Act of truck drivers employed by oil dealers... Interpretations No. 2 1 with respect to coverage under the Walsh-Healey Public Contracts Act of truck drivers...

Comparison of Cooling System Designs for an Exhaust Heat Recovery System Using an Organic Rankine Cycle on a Heavy Duty Truck

Directory of Open Access Journals (Sweden)

Nicolas Stanzel

2016-11-01

Full Text Available A complex simulation model of a heavy duty truck, including an Organic Rankine Cycle (ORC based waste heat recovery system and a vehicle cooling system, was applied to determine the system fuel economy potential in a typical drive cycle. Measures to increase the system performance were investigated and a comparison between two different cooling system designs was derived. The base design, which was realized on a Mercedes-Benz Actros vehicle revealed a fuel efficiency benefit of 2.6%, while a more complicated design would generate 3.1%. Furthermore, fully transient simulation results were performed and are compared to steady state simulation results. It is shown that steady state simulation can produce comparable results if averaged road data are used as boundary conditions.

Forklift safety a practical guide to preventing powered industrial truck incidents and injuries

CERN Document Server

Swartz, George

1999-01-01

Written for the more than 1.5 million powered industrial truck operators and supervisors in general industry, as well as those in the construction and marine industries, this Second Edition provides an updated guide to training operators in safety and complying with OSHA's 1999 forklift standard. This edition of Forklift Safety includes a new chapter devoted to the new OSHA 1910.178 standard and new information regarding dock safety, narrow aisle trucks, off-dock incidents, tip-over safety, pallet safety, and carbon monoxide.

Development of the New Light-Duty Hybrid Truck

OpenAIRE

Yamaguchi, Koichi

2008-01-01

Hino Motors, Ltd., developed the new light-duty hybrid truck whose traction motor, inverter, and traction battery were completely redesigned for maximizing output and efficiency. It also succeeds in balancing low fuel economy and low exhaust emissions by utilizing a combination of a new hybrid system control with a specially developed diesel engine.

Assessing tether anchor labeling and usability in pickup trucks.

Science.gov (United States)

Klinich, Kathleen D; Manary, Miriam A; Malik, Laura A; Flannagan, Carol A; Jermakian, Jessica S

2018-04-03

The objective of this study was to investigate vehicle factors associated with child restraint tether use and misuse in pickup trucks and evaluate 4 labeling interventions designed to educate consumers on proper tether use. Volunteer testing was performed with 24 subjects and 4 different pickup trucks. Each subject performed 8 child restraint installations among the 4 pickups using 2 forward-facing restraints: a Britax Marathon G4.1 and an Evenflo Triumph. Vehicles were selected to represent 4 different implementations of tether anchors among pickups: plastic loop routers (Chevrolet Silverado), webbing routers (Ram), back wall anchors (Nissan Frontier), and webbing routers plus metal anchors (Toyota Tundra). Interventions included a diagram label, Quick Response (QR) Code linked to video instruction, coordinating text label, and contrasting text tag. Subjects used the child restraint tether in 93% of trials. However, tether use was completely correct in only 9% of trials. An installation was considered functional if the subject attached the tether to a tether anchor and had a tight installation (ignoring routing and head restraint position); 28% of subjects achieved a functional installation. The most common installation error was attaching the tether hook to the anchor/router directly behind the child restraint (near the top of the seatback) rather than placing the tether through the router and attaching it to the anchor in the adjacent seating position. The Nissan Frontier, with the anchor located on the back wall of the cab, had the highest rate of correct installations but also had the highest rate of attaching the tether to components other than the tether anchor (seat adjustor, child restraint storage hook, around head restraint). None of the labeling interventions had a significant effect on correct installation; not a single subject scanned the QR Code to access the video instruction. Subjects with the most successful installations spent extensive time

SVOC emissions from diesel trucks operating on biodiesel fuels

Science.gov (United States)

This study measured semivolatile organic compounds (SVOCs) in particle matter (PM) emitted from three heavy-duty trucks equipped with modern after-treatment technologies. Emissions testing was conducted as described by the George et al. VOC study also presented as part of this se...

Effects of demurrage and detention regimes on dry-port-based inland container transport

NARCIS (Netherlands)

Fazi, Stefano; Roodbergen, Kees Jan

2018-01-01

Increase of congestion at container deep seaports and shortage of capacity has led inland transport systems worldwide to rely more and more on inland terminals, and on the use of high capacity modes of transport to generate economies of scale and reduce negative effects of trucking. In this setting,

N2O and NO2 Emissions from Heavy-Duty Diesel Trucks with Advanced Emission Controls

Science.gov (United States)

Preble, C.; Harley, R.; Kirchstetter, T.

2014-12-01

Diesel engines are the largest source of nitrogen oxides (NOx) emissions nationally, and also a major contributor to the black carbon (BC) fraction of fine particulate matter (PM). Recently, diesel particle filter (DPF) and selective catalytic reduction (SCR) emission control systems that target exhaust PM and NOx have become standard equipment on new heavy-duty diesel trucks. However, the deliberate catalytic oxidation of engine-out nitric oxide (NO) to nitrogen dioxide (NO2) in continuously regenerating DPFs leads to increased tailpipe emission of NO2. This is of potential concern due to the toxicity of NO2 and the resulting increases in atmospheric formation of other air pollutants such as ozone, nitric acid, and fine PM. While use of SCR reduces emissions of both NO and NO2, it may lead to increased emissions of nitrous oxide (N2O), a potent greenhouse gas. Here we report results from on-road measurements of heavy-duty diesel truck emissions conducted at the Port of Oakland and the Caldecott Tunnel in the San Francisco Bay Area. Emission factors (g pollutant per kg of diesel) were linked via recorded license plates to individual truck attributes, including engine model year and installed emission control equipment. Between 2009 and 2013, the fraction of DPF-equipped trucks at the Port of Oakland increased from 2 to 99%, and median engine age decreased from 11 to 6 years. Over the same period, fleet-average emission factors for black carbon and NOx decreased by 76 ± 22% and 53 ± 8%, respectively. However, direct emissions of NO2 increased, and consequently the NO2/NOx emission ratio increased from 0.03 ± 0.02 to 0.18 ± 0.03. Older trucks retrofitted with DPFs emitted approximately 3.5 times more NO2 than newer trucks equipped with both DPF and SCR. Preliminary data from summer 2014 measurements at the Caldecott Tunnel suggest that some older trucks have negative emission factors for N2O, and that for newer trucks, N2O emission factors have changed sign and

Professional boundary violations: a literature review.

Science.gov (United States)

Manfrin-Ledet, Linda; Porche, Demetrius J; Eymard, Amanda S

2015-06-01

The purpose of this article is to review the nursing literature related to professional boundary violations in nursing. A search was conducted using CINAHL, MEDLINE, Ebscohost, and NCSBN. The key words searched were professional boundaries, boundary violation, boundary crossings, nurse, home health nurses, and home nursing. The search returned over 40 publications related specifically to boundary violations and nursing although only four of them are published research studies and one as a dissertation. Seven common characteristics emerged from the nonresearch nursing articles on professional boundaries: (1) Dual relations/role reversal, (2) Gifts and money, (3) Excessive self-disclosure, (4) Secretive behavior, (5) Excessive attention/overinvolvement, (6) Sexual behavior, and (7) Social media. Additional nursing research is greatly needed in the area of professional boundaries. The nurse-patient relationship should always be maintained for the benefit of the patient and not the personal gain of the nurse. Ongoing education in nursing practice regarding professional boundaries is needed. Nurses need to be mindful of state practice acts, codes of conduct, and employer policies.

Bias of averages in life-cycle footprinting of infrastructure: truck and bus case studies.

Science.gov (United States)

Taptich, Michael N; Horvath, Arpad

2014-11-18

The life-cycle output (e.g., level of service) of infrastructure systems heavily influences their normalized environmental footprint. Many studies and tools calculate emission factors based on average productivity; however, the performance of these systems varies over time and space. We evaluate the appropriate use of emission factors based on average levels of service by comparing them to those reflecting a distribution of system outputs. For the provision of truck and bus services where fuel economy is assumed constant over levels of service, emission factor estimation biases, described by Jensen's inequality, always result in larger-than-expected environmental impacts (3%-400%) and depend strongly on the variability and skew of truck payloads and bus ridership. Well-to-wheel greenhouse gas emission factors for diesel trucks in California range from 87 to 1,500 g of CO2 equivalents per ton-km, depending on the size and type of trucks and the services performed. Along a bus route in San Francisco, well-to-wheel emission factors ranged between 53 and 940 g of CO2 equivalents per passenger-km. The use of biased emission factors can have profound effects on various policy decisions. If average emission rates must be used, reflecting a distribution of productivity can reduce emission factor biases.

Improving transport container design to reduce broiler chicken PSE (pale, soft, exudative) meat in Brazil.

Science.gov (United States)

Spurio, Rafael S; Soares, Adriana L; Carvalho, Rafael H; Silveira Junior, Vivaldo; Grespan, Moisés; Oba, Alexandre; Shimokomaki, Massami

2016-02-01

Throughout the chicken production chain, transport from farm to the commercial abattoir is one of the most critical sources of stress, particularly heat stress. The aim of this work was to describe the performance of a new prototype truck container designed to improve the microenvironment and reduce the incidence of pale, soft and exudative (PSE) meat and dead on arrival (DOA) occurrences. Experiments were carried out for four different conditions: regular and prototype truck, both with and without wetting loaded cages at the farm (for bird thermal stress relief) just before transporting. While there was no difference in the DOA index (P ≥ 0.05), the prototype truck caused a reduction (P < 0.05) in the occurrence of PSE meat by 66.3% and 49.6% with and without wetting, respectively. The results of this experiment clearly revealed a low-cost solution for transporting chickens that yields better animal welfare conditions and improves meat quality. © 2015 Japanese Society of Animal Science.

Integrability and boundary conditions of supersymmetric systems

International Nuclear Information System (INIS)

Yue Ruihong; Liang Hong

1996-01-01

By studying the solutions of the reflection equations, we find out a series of integrable supersymmetric systems with different boundary conditions. The Hamiltonian contains four free parameters which describe the contribution of the boundary terms

Assessment of the risk of transporting propane by truck and train

Energy Technology Data Exchange (ETDEWEB)

Geffen, C.A.

1980-03-01

The risk of shipping propane is discussed and the risk assessment methodology is summarized. The risk assessment model has been constructed as a series of separate analysis steps to allow the risk to be readily reevaluated as additional data becomes available or as postulated system characteristics change. The transportation system and accident environment, the responses of the shipping system to forces in transportation accidents, and release sequences are evaluated to determine both the likelihood and possible consequences of a release. Supportive data and analyses are given in the appendices. The risk assessment results are related to the year 1985 to allow a comparison with other reports in this series. Based on the information presented, accidents involving tank truck shipments of propane will be expected to occur at a rate of 320 every year; accidents involving bobtails would be expected at a rate of 250 every year. Train accidents involving propane shipments would be expected to occur at a rate of about 60 every year. A release of any amount of material from propane trucks, under both normal transportation and transport accident conditions, is to be expected at a rate of about 110 per year. Releases from propane rail tank cars would occur about 40 times a year. However, only those releases that occur during a transportation accident or involve a major tank defect will include sufficient propane to present the potential for danger to the public. These significant releases can be expected at the lower rate of about fourteen events per year for truck transport and about one event every two years for rail tank car transport. The estimated number of public fatalities resulting from these significant releases in 1985 is fifteen. About eleven fatalities per year result from tank truck operation, and approximately half a death per year stems from the movement of propane in rail tank cars.

Urban risks of truck transport of radioactive material

International Nuclear Information System (INIS)

Mills, G.S.; Neuhauser, K.S.

1998-01-01

Truck transport of radioactive material (RAM), e.g., spent nuclear fuel (SNF), normally maximizes use of Interstate highways, which are safer and more efficient for truck transport in general. In the estimation of transportation risks, population bordering a route is a direct factor in determining consequences and an indirect factor in determining exposure times, accident probabilities and severities, and other parameters. Proposals to transport RAM may draw intense resistance from stakeholders based on concern for population concentrations along urban segments but the length of a route segment is also a determinative factor in estimating the transport risks. To quantify the relative importance of these two factors, a potential route for transport of SNF (strict use of Interstate highways) was selected and compared with a modified version that bypassed urban areas. The RADTRAN 4 code for transportation risk assessment, which was developed at Sandia National Laboratories, was used in the present study to assess the relative risks of SNF transportation for alternative routes. The results suggest that emphasis on Interstate highways minimizes total route and urban segment risks

Operations experience with the NAC-1 legal weight truck cask

International Nuclear Information System (INIS)

Viebrock, J.M.; Hoffman, C.C.

1978-01-01

The first three years of operation of Nuclear Assurance Corporation's (NAC) four (4) NAC-1 Casks have demonstrated that shipments of spent fuel, fuel rods and other highly irradiated reactor components can be moved routinely by legal weight truck transport. Shipments of these materials have involved some 800,000 miles of highway travel and cask handling at some fifteen different nuclear facilities. This paper presents details on NAC's operations experience with these casks including cask description, cask handling (loading and unloading), pre-shipment testing, facility turnaround and transit times, operator exposure, transport vehicles and shipper/carrier/cask owner responsibilities, actual experience with regard to facility interfacing requirements and operational procedures. Cask and equipment utilization is discussed together with the methods used to control operation costs and to improve the economics of truck transport

Containment bellows testing under extreme loads

International Nuclear Information System (INIS)

Splezter, B.L.; Lambert, L.D.; Parks, M.B.

1993-01-01

Sandia National Laboratories (SNL) is conducting several research programs to help develop validated methods for the prediction of the ultimate pressure capacity, at elevated temperatures, of light water reactor (LWR) containment structures. To help understand the ultimate pressure of the entire containment pressure boundary, each component must be evaluated. The containment pressure boundary consists of the containment shell and many access, piping, and electrical penetrations. The focus of the current research program is to study the ultimate behavior of flexible metal bellows that are used at piping penetrations. Bellows are commonly used at piping penetrations in steel containments; however, they have very few applications in concrete (reinforced or prestressed) containments. The purpose of piping bellows is to provide a soft connection between the containment shell and the pipe are attached while maintaining the containment pressure boundary. In this way, piping loads caused by differential movement between the piping and the containment shell are minimized. SNL is conducting a test program to determine the leaktight capacity of containment bellows when subjected to postulated severe accident conditions. If the test results indicate that containment bellows could be a possible failure mode of the containment pressure boundary, then methods will be developed to predict the deformation, pressure, and temperature conditions that would likely cause a bellows failure. Results from the test program would be used to validate the prediction methods. This paper provides a description of the use and design of bellows in containment piping penetrations, the types of possible bellows loadings during a severe accident, and an overview of the test program, including available test results at the time of writing

An analysis of health promotion materials for Dutch truck drivers: Off target and too complex?

Science.gov (United States)

Boeijinga, Anniek; Hoeken, Hans; Sanders, José

2017-01-01

Despite various health promotion initiatives, unfavorable figures regarding Dutch truck drivers' eating behaviors, exercise behaviors, and absenteeism have not improved. The aim was to obtain a better understanding of the low level of effectiveness of current health interventions for Dutch truck drivers by examining to what extent these are tailored to the target group's particular mindset (focus of content) and health literacy skills (presentation of content). The article analyzes 21 health promotion materials for Dutch truck drivers using a two-step approach: (a) an analysis of the materials' focus, guided by the Health Action Process Approach; and (b) an argumentation analysis, guided by pragma-dialectics. The corpus analysis revealed: (a) a predominant focus on the motivation phase; and (b) in line with the aim of motivating the target group, a consistent use of pragmatic arguments, which were typically presented in an implicit way. The results indicate that existing health promotion materials for Dutch truck drivers are not sufficiently tailored to the target group's mindset and health literacy skills. Recommendations are offered to develop more tailored/effective health interventions targeting this high-risk, underserved occupational group.

Battery Dimensioning and Life Cycle Costs Analysis for a Heavy-Duty Truck Considering the Requirements of Long-Haul Transportation

OpenAIRE

Mareev, Ivan; Becker, Jan Nicolas; Sauer, Dirk Uwe

2018-01-01

The use of heavy-duty battery electric trucks for long-haul transportation is challenging because of the required high energy amounts and thus the high capacity of traction batteries. Furthermore a high capacity battery implies high initial costs for the electric vehicle. This study investigates the required battery capacity for battery electric trucks considering the requirements of long-haul transportation in Germany and compares the life cycle costs of battery electric trucks and conventio...

Can cars and trucks coexist peacefully on highways? Analyzing the effectiveness of road safety policies in Europe.

Science.gov (United States)

Castillo-Manzano, José I; Castro-Nuño, Mercedes; Fageda, Xavier

2015-04-01

We examine the impact on the traffic accident rate of the interaction between trucks and cars on Europe's roads using a panel data set that covers the period 1999-2010. We find that rising motorization rates for trucks lead to higher traffic fatalities, while rising motorization rates for cars do not. Empirically, the model we build predicts the positive impact of stricter speed limit legislation for trucks in the reduction of road fatalities. These findings lend support to European strategies and aimed at promoting alternative modes of freight transport, including rail and maritime transport. Copyright © 2015 Elsevier Ltd. All rights reserved.

TITAN Legal Weight Truck cask preliminary design report

International Nuclear Information System (INIS)

1990-04-01

The Preliminary Design of the TITAN Legal Weight Truck (LWT) Cask System and Ancillary Equipment is presented in this document. The scope of the document includes the LWT cask with fuel baskets; impact limiters, and lifting and tiedown features; the cask support system for transportation; intermodal transfer skid; personnel barrier; and cask lifting yoke assembly. 75 figs., 48 tabs

The energetic ion substorm injection boundary

International Nuclear Information System (INIS)

Lopez, R.E.; Sibeck, D.G.; McEntire, R.W.; Krimigis, S.M.

1990-01-01

The substorm injection boundary model has enjoyed considerable success in explaining plasma signatures in the near-geosynchronous region. However, the injection boundary has remained primarily a phenomenological model. In this paper the authors examine 167 dispersionless energetic ion injections which were observed by AMPTE CCE. The radial and local time distribution of the events as a function of Kp is qualitatively similar to that envisioned in the injection boundary model of Mauk and McIlwain (1974). They argue that particles observed during dispersionless injections are locally energized during the disruption of the cross-tail current sheet. Therefore they identify the injection boundary, as derived from the spatial distribution of dispersionless injections, with the earthward edge of the region of the magnetotail which undergoes current sheet disruption during the substorm expansion phase. The authors show that this qualitative model for the generation of the injection boundary can provide an explanation for the dispersionless nature, the double spiral shape, and the Kp dependence of the boundary

Exploring boundary-spanning practices among creativity managers

DEFF Research Database (Denmark)

Andersen, Poul Houman; Kragh, Hanne

2015-01-01

Purpose – External inputs are critical for organisational creativity. In order to bridge different thought worlds and cross-organisational barriers, managers must initiate and motivate boundary spanning processes. The purpose of this paper is to explore how boundary spanners manage creativity...... and observation. Findings – Three meta-practices used by managers to manage boundary-spanning creative projects are presented: defining the creative space, making space for creativity and acting in the creative space. These practices are detailed in seven case studies of creative projects. Research limitations...

UV absorption cross-sections of selected sulfur-containing compounds at temperatures up to 500°C

DEFF Research Database (Denmark)

Grosch, Helge; Fateev, Alexander; Clausen, Sønnik

2015-01-01

The temperature dependence of the ultraviolet absorption cross-sections of three different sulfur containing compounds, hydrogen sulfide (H2S), carbon disulfide (CS2) and carbonyl sulfide (OCS), are presented between 200nm and 360nm at a resolution of 0.018nm. The absorption cross-sections for each...... compound are initially compared with those available in the literature, followed by the discussion of the measurements and their spectral features at three temperatures up to 500°C/773K. Uncertainties in the measured absorption cross-sections are also addressed....

An exploration study to find important factors in market entrance: A case study of truck industry

Directory of Open Access Journals (Sweden)

Zoheir Khodamoradi

2013-09-01

Full Text Available This paper presents an empirical investigation to find important factors influencing market penetration in truck industry. The proposed study designs a questionnaire in Likert scale consists of 51 questions, distributes it among 300 people who worked for different truck industry related units and collects 262 filled ones. Cronbach alpha is calculated as 0.89. In addition, Kaiser-Meyer-Olkin Measure of Sampling Adequacy and Approx. Chi-Square are 0.845 and 3067.443, respectively. The study has implemented principal component analysis and the results have indicated that there were eight factors influencing entering truck making industry including adaptation strategies, new ideas, cost competitiveness, product capabilities, market characteristics, competition threats from external market environment and export accelerators.

75 FR 20005 - Crawler, Locomotive, and Truck Cranes Standard; Extension of the Office of Management and Budget...

Science.gov (United States)

2010-04-16

...] Crawler, Locomotive, and Truck Cranes Standard; Extension of the Office of Management and Budget's (OMB... Crawler, Locomotive, and Truck Cranes Standard (29 CFR 1910.180). DATES: Comments must be submitted... of each of these requirements is to prevent workers from using unsafe cranes and ropes, thereby...

75 FR 38168 - Federal Motor Vehicle Theft Prevention Standard; Final Listing of 2011 Light Duty Truck Lines...

Science.gov (United States)

2010-07-01

... Theft Prevention Standard; Final Listing of 2011 Light Duty Truck Lines Subject to the Requirements of... light-duty truck lines subject to the requirements of the Federal motor vehicle theft prevention... exemption from the parts marking requirements of the Theft Prevention Standard for the Jaguar XJ vehicle...

Lack of HIV infection among truck drivers in Iran using rapid HIV test

Directory of Open Access Journals (Sweden)

Hossain Jabbari

2010-01-01

Full Text Available Background: The aim of this study was to evaluate the prevalence of HIV infection in Iranian long distance truck drivers using rapid HIV test. Methods: The study included 400 consecutive participants in Bazargan city, north-west of Iran in the late 2008 and the early 2009. Results: No HIV infection was observed among these long distance truck drivers. Conclusions: Although results of this study is plausible compared to other similar studies, repeated surveys are necessary to know the trend of HIV infection in truckers in Iran.

Radiometric evaluation of cargo and container inspection systems with X-ray emitting accelerators; Avaliação radiométrica de sistemas de inspeção de cargas e contêineres com aceleradores emissores de raios-X

Energy Technology Data Exchange (ETDEWEB)

Fideles, L.; Costa, J., E-mail: lazarofideles@gmail.com [Faculdade Casa Branca, SP (Brazil). Pós-Graduação de Proteção Radiológica em Aplicações Médicas, Industriais e Nucleares; Pelegrineli, S.Q. [MAXIM Cursos, Rio de Janeiro-RJ (Brazil); Lima, A.R. [Comissão Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)

2017-07-01

In X-ray scanners for non-invasive safety inspection of vehicles, cargoes and containers from linear accelerators, installed at borders, boundaries and port terminals, the exposure rates in the supervised and controlled areas of the facility may vary considerably, depending on the type of body of the inspected vehicle. The study emerges as a way to reassess safety insulation and create additional shielding means as increased radiation levels during inspections can increase the likelihood of stochastic effects for occupationally exposed individuals and public individuals. The objective of the study is to measure and analyze the variation of the radiation exposure rate in the installation, considering trucks with metal and canvas bodies, which are inspected in these scanners. This is an experimental field study in X-ray scanners for inspection of cargoes and containers, the exposure rates being obtained by means of a radiation detector type ionization chamber.

Truck drivers, middlemen and commercial sex workers: AIDS and the mediation of sex in south west Uganda.

Science.gov (United States)

Gysels, M; Pool, R; Bwanika, K

2001-06-01

Although long distance truck drivers have been implicated in the spread of HIV in Africa, there is a paucity of studies of their sexual cultures. This paper reports on a study of the sexual culture of drivers, mediators and commercial sex workers (CSWs) in a roadside truck stop on the Trans-Africa highway in south west Uganda. Sixty-nine truck drivers, six middlemen and 12 CSWs were interviewed using semi-structured questionnaires. Interviewing truck drivers also entailed participating in the town's nightlife and spending much time in the bars. Truck drivers stop briefly at the truck stop for various reasons: to eat, sleep, have sex and sell goods they are carrying. Middlemen mediate the latter two activities. Middlemen buy goods from the drivers and introduce them to 'suitable' women with whom they can have casual sex. Most drivers have sex when they spend the night at the truck stop, and most make use of the services of the middlemen. The most important reasons why drivers use middlemen are that the latter speak the local languages and, in particular, know the trustworthy and 'safe' (HIV-negative) women. The CSWs use middlemen mainly because they are a guarantee that the driver will pay and they usually ensure that drivers pay well. The mediation system is becoming increasingly professionalized. Most drivers claimed to use condoms during casual sex, and this was confirmed by the CSWs. General use of condoms is encouraging, particularly given the context of a culture generally opposed to condoms. The idea that middlemen can recognize 'safe' women is worrying. However, given their key position, middlemen could form the hub of an opinion leader type intervention focused on drivers and the professional group of sex workers described here, providing condoms, advising about the importance of condom use in all casual sexual encounters, giving information about HIV and STDs, and possibly referring drivers and women to appropriate sources of HIV counselling and testing

Commercial truck platooning demonstration in Texas – level 2 automation.

Science.gov (United States)

2017-08-01

Through this project, the Texas Department of Transportation (TxDOT) funded the creation of a comprehensive truck platooning demonstration in Texas, serving as a proactive effort in assessing innovative operational strategies to position TxDOT as a l...

Light trucks and highway fatalities : the role of network effects.

Science.gov (United States)

2012-12-01

Light trucks, such as sport utility vehicles (SUVs) : and pickups, impose greater risks of injury and : death on other motorists than do cars, while at the : same time providing their occupants with increased : protection against these risks relative...

North American Free Trade Agreement : coordinated operational plan needed to ensure Mexican trucks' compliance with U.S. standards

Science.gov (United States)

2001-12-01

In response to concerns about the safety of Mexican trucks, the General Accounting Office (GAO) was asked to examine (1) the extent to which Mexican-domiciled commercial trucks are likely to travel beyond U.S. border commercial zones once the border ...

Seed defective reduction in automotive Electro-Deposition Coating Process of truck cabin

Science.gov (United States)

Sonthilug, Aekkalag; Chutima, Parames

2018-02-01

The case study company is one of players in Thailand’s Automotive Industry who manufacturing truck and bus for both domestic and international market. This research focuses on a product quality problem about seed defects occurred in the Electro-Deposition Coating Process of truck cabin. The 5-phase of Six Sigma methodology including D-Define, M-Measure, A-Analyze, I-Improve, and C-Control is applied to this research to identify root causes of problem for setting new parameters of each significant factor. After the improvement, seed defects in this process is reduced from 9,178 defects per unit to 876 defects per unit (90% improvement)

29 CFR 1910.180 - Crawler locomotive and truck cranes.

Science.gov (United States)

2010-07-01

... the shaft or spindle with which or about which a wheel rotates. On truck- and wheel-mounted cranes it... and ropes. Cranes designed for railway and automobile wreck clearances are excepted. The requirements..., 1971, shall meet the design specifications of the American National Standard Safety Code for Crawler...

Real-Time Dispatch of Petroleum Tank Trucks

OpenAIRE

Brown, Gerald G.; Graves, Glenn W.

1981-01-01

Management Science, 27, 1, pp. 19-32. (1982 International Management Science Achievement Award Finalist). A highly automated, real-time dispatch system is described which uses embedded optimization routines to replace extensive manual operations and to reduce substantially operating costs for a nation-wide fleet of petroleum tank trucks. The system is currently used in daily operations by the Order Entry and Dispatch segment of the Chevron U.S.A. Marketing System. Refined petroleum produ...

Modeling of Spray System Operation under Hydrogen and Steam Emissions in NPP Containment during Severe Accident

Directory of Open Access Journals (Sweden)

Vadim E. Seleznev

2011-01-01

Full Text Available The paper describes one of the variants of mathematical models of a fluid dynamics process inside the containment, which occurs in the conditions of operation of spray systems in severe accidents at nuclear power plant. The source of emergency emissions in this case is the leak of the coolant or rupture at full cross-section of the main circulating pipeline in a reactor building. Leak or rupture characteristics define the localization and the temporal law of functioning of a source of emergency emission (or accrued operating of warmed up hydrogen and steam in the containment. Operation of this source at the course of analyzed accident models should be described by the assignment of the relevant Dirichlet boundary conditions. Functioning of the passive autocatalytic recombiners of hydrogen is described in the form of the complex Newton boundary conditions.

Axisymmetric MHD stability of sharp-boundary Tokamaks

International Nuclear Information System (INIS)

Rebhan, E.; Salat, A.

1976-09-01

For a sharp-boundary, constant pressure plasma model of axisymmetric equilibria the MHD stability problem of axisymmetric perturbations is solved by analytic reduction to a one-dimensional problem on the boundary and subsequent numerical treatment, using the energy principle. The stability boundaries are determined for arbitrary aspect ratio, arbitrary βsub(p) and elliptical, triangular and rectangular plasma cross-sections, wall stabilization not being taken into account. It is found that the axisymmetric stability strongly depends on the plasma shape and is almost independent of the safety factor q. (orig.) [de

Recovery Act--Class 8 Truck Freight Efficiency Improvement Project

Energy Technology Data Exchange (ETDEWEB)

Trucks, Daimler [Daimler Trucks North America Llc, Portland, OR (United States)

2015-07-26

Daimler Trucks North America completed a five year, $79.6M project to develop and demonstrate a concept vehicle with at least 50% freight efficiency improvement over a weighted average of several drive cycles relative to a 2009 best-in-class baseline vehicle. DTNA chose a very fuel efficient baseline vehicle, the 2009 Freightliner Cascadia with a DD15 engine, yet successfully demonstrated a 115% freight efficiency improvement. DTNA learned a great deal about the various technologies that were incorporated into Super Truck and those that, through down-selection, were discarded. Some of the technologies competed with each other for efficiency, and notably some of the technologies complemented each other. For example, we found that Super Truck’s improved aerodynamic drag resulted in improved fuel savings from eCoast, relative to a similar vehicle with worse aerodynamic drag. However, some technologies were in direct competition with each other, namely the predictive technologies which use GPS and 3D digital maps to efficiently manage the vehicles kinetic energy through controls and software, versus hybrid which is a much costlier technology that essentially targets the same inefficiency. Furthermore, the benefits of a comprehensive, integrated powertrain/vehicle approach was proven, in which vast improvements in vehicle efficiency (e.g. lower aero drag and driveline losses) enabled engine strategies such as downrating and downspeeding. The joint engine and vehicle developments proved to be a multiplier-effect which resulted in large freight efficiency improvements. Although a large number of technologies made the selection process and were used on the Super Truck demonstrator vehicle, some of the technologies proved not feasible for series production.

DNA oligonucleotide duplexes containing intramolecular platinated cross-links: energetics, hydration, sequence, and ionic effects.

Science.gov (United States)

Kankia, Besik I; Soto, Ana Maria; Burns, Nicole; Shikiya, Ronald; Tung, Chang-Shung; Marky, Luis A

2002-11-05

The anticancer activity of cisplatin arises from its ability to bind covalently to DNA, forming primarily intrastrand cross-links to adjacent purine residues; the most common adducts involve d(GpG) (65%) and d(ApG) (25%) intrastrand cross-links. The incorporation of these platinum adducts in a B-DNA helix induces local distortions, causing bending and unwinding of the DNA. In this work, we used temperature-dependent UV spectroscopy to investigate the unfolding thermodynamics, and associated ionic effects, of two sets of DNA decamer duplexes containing either cis-[Pt(NH(3))(2)[d(GpG

Vehicle test report: Battronic pickup truck

Science.gov (United States)

Price, T. W.; Shain, T. W.; Freeman, R. J.; Pompa, M. F.

1982-01-01

An electric pickup truck was tested to characterize certain parameters and to provide baseline data that can be used for the comparison of improved batteries that may be incorporated into the vehicle at a later time. The vehicle tests were concentrated on the electrical drive subsystem; i.e., the batteries, controller, and motor. The tests included coastdowns to characterize the road load and range evaluations for both cyclic and constant speed conditions. A qualitative evaluation of the vehicle's performance was made by comparing its constant speed range performance with other vehicles.

Experimental Research on Boundary Shear Stress in Typical Meandering Channel

Science.gov (United States)

Chen, Kai-hua; Xia, Yun-feng; Zhang, Shi-zhao; Wen, Yun-cheng; Xu, Hua

2018-06-01

A novel instrument named Micro-Electro-Mechanical System (MEMS) flexible hot-film shear stress sensor was used to study the boundary shear stress distribution in the generalized natural meandering open channel, and the mean sidewall shear stress distribution along the meandering channel, and the lateral boundary shear stress distribution in the typical cross-section of the meandering channel was analysed. Based on the measurement of the boundary shear stress, a semi-empirical semi-theoretical computing approach of the boundary shear stress was derived including the effects of the secondary flow, sidewall roughness factor, eddy viscosity and the additional Reynolds stress, and more importantly, for the first time, it combined the effects of the cross-section central angle and the Reynolds number into the expressions. Afterwards, a comparison between the previous research and this study was developed. Following the result, we found that the semi-empirical semi-theoretical boundary shear stress distribution algorithm can predict the boundary shear stress distribution precisely. Finally, a single factor analysis was conducted on the relationship between the average sidewall shear stress on the convex and concave bank and the flow rate, water depth, slope ratio, or the cross-section central angle of the open channel bend. The functional relationship with each of the above factors was established, and then the distance from the location of the extreme sidewall shear stress to the bottom of the open channel was deduced based on the statistical theory.

In search of zonal flows using cross-bispectrum analysis in the boundary plasma of the Hefei Tokamak-7

International Nuclear Information System (INIS)

Xu, G.S.; Wan, B.N.; Song, M.

2002-01-01

Langmuir probes have been used to measure the electrostatic Reynolds stress and the floating potential fluctuation in the boundary plasma of the Hefei Tokamak-7 (HT-7) [J. Li, B. N. Wan, and J. S. Mao, Plasma Phys. Controlled Fusion 42, 135 (2000)]. The cross bispectrum of r V(tilde sign) θ φ(tilde sign) f > indicates the existence of difference-frequency nonlinear phase coupling and the generation of fluctuations near the geodesic acoustic mode frequency. The inverse cascade process might be linked to the generation of zonal flows by small-scale electrostatic drift-wave turbulence

Analysis of Maintenance Service Contracts for Dump Trucks Used in Mining Industry with Simulation Approach

Science.gov (United States)

Dymasius, A.; Wangsaputra, R.; Iskandar, B. P.

2016-02-01

A mining company needs high availability of dump trucks used to haul mining materials. As a result, an effective maintenance action is required to keep the dump trucks in a good condition and hence reducing failure and downtime of the dump trucks. To carry out maintenance in-house requires a high intensive maintenance facility and high skilled maintenance specialists. Often, outsourcing maintenance is an economic option for the company. An external agent takes a proactive action with offering some maintenance contract options to the owner. The decision problem for the owner is to decide the best option and for the agent is to determine the optimal price for each option offered. A non-cooperative game-theory is used to formulate the decision problems for the owner and the agent. We consider that failure pattern of each truck follows a non-homogeneous Poisson process (NHPP) and a queueing theory with multiple servers is used to estimate the downtime. As it involves high complexity to model downtime using a queueing theory, then in this paper we use a simulation method. Furthermore, we conduct experiment to seek for the best number of maintenance facilities (servers) which minimises maintenance and penalty costs incurred to the agent.

Allegheny County Parcel Boundaries

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains parcel boundaries attributed with county block and lot number. Use the Property Information Extractor for more control downloading a filtered...

Intervention strategies to eliminate truck-related fatalities in surface coal mining in West Virginia.

Science.gov (United States)

Zhang, Meng; Kecojevic, Vladislav

2016-01-01

The main objective of this review was to build upon a previous study on the root causes of truck-related fatalities in surface coal mining operations in West Virginia, and to develop intervention strategies to eliminate these fatalities. This review considers a two-pronged approach to accident prevention: one that is fundamental and traditional (safety regulations, training and education, and engineering of the work environment); and one that is innovative and creative (e.g., applying technological advances to better control and eliminate the root causes of accidents). Suggestions for improving current training and education system are proposed, and recommendations are provided on improving the safety of mine working conditions, specifically safety conditions on haul roads, dump sites, and loading areas. We also discuss various currently available technologies that can help prevent haul truck-related fatal accidents. The results of this review should be used by mine personnel to help create safer working conditions and decrease truck-related fatalities in surface coal mining.

Improvement of the mining technology with the ring movement scheme of the haul trucks

Directory of Open Access Journals (Sweden)

Slobodyanyuk R.V.

2016-04-01

Full Text Available The article describes the designed technology that allows to expand the use of the haul truck ring movement scheme and to reduce the share of an empty run time in the transportation cycle. A preliminary calculation of the efficiency of its usage has allowed to confirm the main advantages of this scheme over the existing one as follows: reducing the required number of transport for the needs of open-pit mine operation by increasing the productivity of mining trucks; decreasing the transport operating costs (some part of an empty truck movement occurs when the engine is switched off; dropping the probability of accidents (reduced a number of the counter transport maneuvers. The calculation showed the regularity of changes in the efficiency using the alternative scheme in relation to the basic one, which reflecting significantly higher effectiveness in situations with a smaller distance between the empty run sites of the ring scheme.

Reducing heat transfer across the insulated walls of refrigerated truck trailers by the application of phase change materials

International Nuclear Information System (INIS)

Ahmed, Mashud; Meade, Oliver; Medina, Mario A.

2010-01-01

A general estimate shows that 80% of communities across the United States receive their goods exclusively by transport trucks, of which a significant number are climate-controlled because they carry perishable goods, pharmaceutical items and many other temperature-sensitive commodities. Keeping the inside of a truck trailer at a constant temperature and relative humidity requires exact amounts of heat and/or moisture management throughout the shipment period, which is regulated via small refrigeration units, placed outside the truck, that operate by burning fuel. These trucks, known as refrigerated truck trailers, are the focus of this paper. In the research presented herein, the conventional method of insulation of the refrigerated truck trailer was modified using phase change materials (PCMs). The limited research carried out in refrigerated transport compared to other refrigeration processes has left spaces for innovative solutions in this area. The research investigated the inclusion of paraffin-based PCMs in the standard trailer walls as a heat transfer reduction technology. An average reduction in peak heat transfer rate of 29.1% was observed when all walls (south, east, north, west, and top) were considered. For individual walls, the peak heat transfer rate was reduced in the range of 11.3-43.8%. Overall average daily heat flow reductions into the refrigerated compartment of 16.3% were observed. These results could potentially translate into energy savings, pollution abatement from diesel-burning refrigeration units, refrigeration equipment size reduction, and extended equipment operational life. The research and its results will help to better understand the scope of this technology.

Sector boundary distortion in the interplanetary medium

International Nuclear Information System (INIS)

Suess, S.T.; Feynman, J.

1977-01-01

We address the theoretical problem of the effect of a solar wind meridional velocity gradient on the orientation, or tipping, of a line embedded within the interplanetary plasma. We find that rotations of from 30degree to 75degree, between 1.5 solar radii and I AU, are produced when observed values for the solar wind velocity and its meridional gradient are used. This is not a small effect, nor is it difficult to calculate: it is a natural consequence of any meridional velocity gradient in the interplanetary medium. In relating this result to observed sector boundaries we note that the latitude dependence of the width of interplanetary magnetic sectors (dominant polarity or Rosenberg-Coleman effect) implies that sector boundaries at I AU are generally inclined at an angle of from 10degree to 20degree to the solar equatorial plane. Conversely, studies of photospheric magnetic fields have led to the conclusion that sector boundaries near the sun are, on the average, at large angles (approx.90degree) to the solar equatorial plane. If the dominant polarity effect were to be produced by rotation in the interplanetary medium, the sign of the solar wind meridional velocity gradient must not change at the equator, but the gradient does have to change sign for +/- boundary crossings in comparison to -/+ boundary crossings

Social Cognitive Antecedents of Fruit and Vegetable Consumption in Truck Drivers: A Sequential Mediation Analysis.

Science.gov (United States)

Hamilton, Kyra; Vayro, Caitlin; Schwarzer, Ralf

2015-01-01

To examine a mechanism by which social cognitive factors may predict fruit and vegetable consumption in long-haul truck drivers. Dietary self-efficacy, positive outcome expectancies, and intentions were assessed in 148 Australian truck drivers, and 1 week later they reported their fruit and vegetable consumption. A theory-guided sequential mediation model was specified that postulated self-efficacy and intention as mediators between outcome expectancies and behavior. The hypothesized model was confirmed. A direct effect of outcome expectancies was no longer present when mediators were included, and all indirect effects were significant, including the 2-mediator chain (β = .15; P role of outcome expectancies and self-efficacy are important to consider for understanding and predicting healthy eating intentions in truck drivers. Copyright © 2015 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Using 3D Multi-Body Simulation to Evaluate Future Truck Technologies

National Research Council Canada - National Science Library

Gunter, Dave; Bylsma, Wes; Letherwood, Mike; Dennis, Stacey; Argeropoulos, Kris; Teschendorf, Dan; Gorsich, Dave

2004-01-01

... steering, and in-hub electric drive motors. Fully three-dimensional Future Truck models were created using a commercially available modeling and simulation methodology and limited validation studies were performed by comparing model...

3 CFR - Imports of Certain Passenger Vehicle and Light Truck Tires From the People's Republic of China

Science.gov (United States)

2010-01-01

... vehicle and light truck tires from the People's Republic of China (China) are being imported into the... 3 The President 1 2010-01-01 2010-01-01 false Imports of Certain Passenger Vehicle and Light Truck... Presidential Determination No. 2009-28 of September 11, 2009 Imports of Certain Passenger Vehicle and Light...

Boundary crossing and brokering between disciplines in pre-service mathematics teacher education

Science.gov (United States)

Goos, Merrilyn; Bennison, Anne

2017-12-01

In many countries, pre-service teacher education programs are structured so that mathematics content is taught in the university's mathematics department and mathematics pedagogy in the education department. Such program structures make it difficult to authentically interweave content with pedagogy in ways that acknowledge the roles of both mathematicians and mathematics educators in preparing future teachers. This article reports on a project that deliberately fostered collaboration between mathematicians and mathematics educators in six Australian universities in order to investigate the potential for learning at the boundaries between the two disciplinary communities. Data sources included two rounds of interviews with mathematicians and mathematics educators and annual reports prepared by each participating university over the three years of the project. The study identified interdisciplinary boundary practices that led to integration of content and pedagogy through new courses co-developed and co-taught by mathematicians and mathematics educators, and new approaches to building communities of pre-service teachers. It also developed an evidence-based classification of conditions that enable or hinder sustained collaboration across disciplinary boundaries, together with an empirical grounding for Akkerman and Bakker's conceptualisation of transformation as a mechanism for learning at the boundary between communities. The study additionally highlighted the ambiguous nature of boundaries and implications for brokers who work there to connect disciplinary paradigms.

Chromoproteinoids and their ability to form boundary

International Nuclear Information System (INIS)

Heinz, B.

1992-01-01

Model systems for boundary structures and cellular systems, particularly when they are a result of natural simulation experiments, are always valuable for the study of the ''Origins of Life''. Lyophilization of chromoproteinoids - peptide like molecules containing prosthetic groups - leads to the formation of boundary structures

The Frasnian-Famennian boundary (Upper Devonian) within the Hanover-Dunkirk transition, northern Appalachian basin, western New York state

Energy Technology Data Exchange (ETDEWEB)

Over, D.J. (State Univ. of New York, Geneseo, NY (United States))

1993-03-01

In western New York State interbedded pyritic silty green and dark grey shales and siltstone of the Hanover Member, Java Formation, West Falls Group, are overlain by thick pyritic dark grey-black shale of the Dunkirk Member of the Canadaway formation. The dark shales in the upper Hanover and Dunkirk contain a diverse and well preserved conodont fauna which allows precise placement of the Frasnian-Famennian boundary at several described sections. At Pt. Gratiot, in far western New York State, the contact between the Hanover and Dunkirk is disconformable. The Frasnian-Famennian boundary is marked by a pyritic lag deposit at the base of the Dunkirk which contains Palmatolepis triangularis and Pa. subperlobata. The underlying upper Hanover is characterized by Pa. bogartensis , Pa. cf. Pa. rhenana, Pa. winchelli, and Ancyrognathus (asymmetricus/calvini) Eastward, in the direction of the paleo-source area, the Frasnian-Famennian boundary is within the upper Hanover Member. At Irish Gulf the boundary is recognized within a 10 cm thick laminated pyritic dark grey shale bed 3.0 m below the base of the Dunkirk. Palmatolepis triangularis and Pa. subperlobata occur below a conodont-rich lag layer in the upper 2 cm of the bed. Palmatolepis bogartensis , Pa. cf. Pa. rhenana, Ancyrodella curvata, and Icriodus alternatus occur in the underlying 8 cm. Palmatolepis triangularis and Pa. winchelli occur in an underlying dark shale bed separated from the boundary bed by a hummocky cross-bedded siltstone layer.