Cost analysis and exploratory cost-effectiveness of youth-friendly sexual and reproductive health services in the Republic of Moldova

Science.gov (United States)

2014-01-01

Background Youth-friendly sexual and reproductive health services (YFHS) have high priority in many countries. Yet, little is known about the cost and cost-effectiveness of good quality YFHS in resource limited settings. This paper analyses retrospectively costs and potential cost-effectiveness of four well performing youth-friendly health centres (YFHC) in Moldova. This study assesses: (1) what were the costs of YFHSs at centre level, (2) how much would scaling-up to a national good quality YFHS programme cost, and (3) was the programme potentially cost-effective? Methods Four well performing YFHCs were selected for the study. YFHS costs were analysed per centre, funding source, service and person reached. The costing results were extrapolated to estimate cost of a good quality national YFHS programme in Moldova. A threshold analysis was carried out to estimate the required impact level for the YFHSs to break-even (become cost saving). Results Average annual cost of a well performing YFHC was USD 26,000 in 2011. 58% was financed by the National Health Insurance Company and the rest by external donors (42%). Personnel salaries were the largest expense category (47%). The annual implementation costs of a good quality YFHSs in all 38 YFHCs of Moldova were estimated to be USD 1.0 million. The results of the threshold analysis indicate that the annual break-even impact points in a YFHC for: 1) STI services would be >364 averted STIs, 2) early pregnancy and contraceptive services >178 averted unwanted pregnancies, and 3) HIV services only >0.65 averted new HIV infections. Conclusions The costing results highlight the following: 1) significant additional resources would be required for implementation of a good quality national YFHS programme, 2) the four well performing YFHCs rely heavily on external funding (42%), 3) which raises questions about financial sustainability of the programme. At the same time results of the threshold analysis are encouraging. The result

Cost analysis and exploratory cost-effectiveness of youth-friendly sexual and reproductive health services in the Republic of Moldova.

Science.gov (United States)

Kempers, Jari; Ketting, Evert; Lesco, Galina

2014-07-21

Youth-friendly sexual and reproductive health services (YFHS) have high priority in many countries. Yet, little is known about the cost and cost-effectiveness of good quality YFHS in resource limited settings. This paper analyses retrospectively costs and potential cost-effectiveness of four well performing youth-friendly health centres (YFHC) in Moldova. This study assesses: (1) what were the costs of YFHSs at centre level, (2) how much would scaling-up to a national good quality YFHS programme cost, and (3) was the programme potentially cost-effective? Four well performing YFHCs were selected for the study. YFHS costs were analysed per centre, funding source, service and person reached. The costing results were extrapolated to estimate cost of a good quality national YFHS programme in Moldova. A threshold analysis was carried out to estimate the required impact level for the YFHSs to break-even (become cost saving). Average annual cost of a well performing YFHC was USD 26,000 in 2011. 58% was financed by the National Health Insurance Company and the rest by external donors (42%). Personnel salaries were the largest expense category (47%). The annual implementation costs of a good quality YFHSs in all 38 YFHCs of Moldova were estimated to be USD 1.0 million. The results of the threshold analysis indicate that the annual break-even impact points in a YFHC for: 1) STI services would be >364 averted STIs, 2) early pregnancy and contraceptive services >178 averted unwanted pregnancies, and 3) HIV services only >0.65 averted new HIV infections. The costing results highlight the following: 1) significant additional resources would be required for implementation of a good quality national YFHS programme, 2) the four well performing YFHCs rely heavily on external funding (42%), 3) which raises questions about financial sustainability of the programme. At the same time results of the threshold analysis are encouraging. The result suggest that, together the three SRH

Why acting environmentally-friendly feels good: Exploring the role of self-image

Directory of Open Access Journals (Sweden)

Leonie A Venhoeven

2016-11-01

Full Text Available Recent research suggests that engagement in environmentally-friendly behavior can feel good. Current explanations for such a link do not focus on the nature of environmentally-friendly behavior itself, but rather propose well-being is more or less a side-benefit; behaviors that benefit environmental quality (e.g. spending one’s money on people rather than products also tend to make us feel good. We propose that the moral nature of environmentally-friendly behavior itself may elicit positive emotions as well, because engaging in this behavior can signal one is an environmentally-friendly and thus a good person. Our results show that engagement in environmentally-friendly behavior can indeed affect how people see themselves: participants saw themselves as being more environmentally-friendly when they engaged in more environmentally-friendly behavior (Study 1. Furthermore, environmentally-friendly behavior resulted in a more positive self-image, more strongly when it was voluntarily engaged in, compared to when it was driven by situational constraints (Study 2. In turn, the more environmentally-friendly (Study 1 and positive (Study 2 people saw themselves, the better they felt about acting environmentally-friendly. Together, these results suggest that the specific self-signal that ensues from engaging in environmentally-friendly behavior can explain why environmentally-friendly actions may elicit a good feeling.

Incentives for environmentally friendly vehicles. A report from the Environment and Health Protection Administration in Stockholm

Energy Technology Data Exchange (ETDEWEB)

Henriksson, Cecilia; Paedam, S. [Inregia AB, Stockholm (Sweden)

1999-11-01

This report deals with incentives for environmentally friendly vehicles. The report includes a description of the current status of these vehicles in Sweden, Stockholm County Council, and the City of Stockholm. A forecast of possible development of zero and low emission vehicles is carried out. The major obstacles which currently hinder a market for these vehicles are noted. In order to determine market readiness and factors which affect these firms' purchase of vehicles, interviews were carried out with private firms. This analysis indicates that institutional barriers in Sweden hinder zero and low emission vehicles, with laws and tax policies which offer conflicting signals. To follow international developments, these obstacles must be reduced. Therefore, it is important that Stockholm works to create a positive climate for environmentally friendly vehicles. This means that it is important that the policies recommended in this report are implemented with adequate intensity. Because knowledge about zero and low emission vehicles is limited, there is a need to produce factual information. Information can be spread to a larger group, but it is more cost effective to reach a group which is most likely to accept environmentally friendly vehicles. This could include companies with environmental profiles, or those who drive and use company cars. To increase the effectiveness of this information campaign, we suggest that the City also maintain a demonstration fleet with loaner cars for companies who wish to test these vehicles in daily operation before deciding whether or not to purchase them. The incentive package recommended for Stockholm includes offering parking rebates to various groups who park in the city centre; residents , commercial vehicles, and temporary visitors. For equity reasons, all groups should in practice be offered the rebate. To increase the positive effect of the incentive, environmentally friendly vehicles should also be allowed to drive in

A Study on the establishment of environmental friendly taxation system II - concentrated on calculation of environmental friendly subsidy and taxation reform

Energy Technology Data Exchange (ETDEWEB)

Noh, Sang Hwan; Lim, Hyun Jung [Korea Environment Institute, Seoul (Korea)

1998-12-01

Establishing an environmental friendly taxation system, designing to have a sustainable development and environmental conservation simultaneously, is an important problem to be solved. Following the study on calculation of water and energy subsidy in previous year, the amount of environmental unfriendly subsidy in transportation and agriculture was calculated. Based on the introduction plan of new environmental tax, such as carbon tax and product share, a scheme of environmental friendly taxation reform was proposed. 48 refs., 5 figs., 88 tabs.

The Danish technology foresight on environmentally friendly agriculture

DEFF Research Database (Denmark)

Borch, Kristian

2013-01-01

A premise that is necessary for agriculture to develop into an environmentally friendly direction is that research is undertaken into environmentally friendly technologies and methods and how they can be brought into use. There is a need for a prioritised research effort that focuses on those...... without any plan or with some thought. Therefore the National Forest and Nature Agency in Denmark initiated the Green Technological foresight on environmentally friendly agriculture with the aim of examining the agricultural environmental challenges and suggesting technological and structural solutions....... problems which are related to minimising environmental problems affected by the agricultural production’s negative influence on the surroundings, improving animal welfare and finding new ways and products for agriculture. Future directions of agriculture can derive with or without dialogue; it can occur...

A Survey on Turkish Elementary School Students' Environmental Friendly Behaviours and Associated Variables

Science.gov (United States)

Alp, Elvan; Ertepinar, Hamide; Tekkaya, Ceren; Yilmaz, Ayhan

2008-01-01

This study investigated elementary school students' environmental knowledge and attitudes, the effects of sociodemographic variables on environmental knowledge and attitudes, and how self-reported environmentally friendly behaviour is related to environmental knowledge, behavioural intentions, environmental affects, and the students' locus of…

Evaluation of trade-offs in costs and environmental impacts for returnable packaging implementation

Science.gov (United States)

Jarupan, Lerpong; Kamarthi, Sagar V.; Gupta, Surendra M.

2004-02-01

The main thrust of returnable packaging these days is to provide logistical services through transportation and distribution of products and be environmentally friendly. Returnable packaging and reverse logistics concepts have converged to mitigate the adverse effect of packaging materials entering the solid waste stream. Returnable packaging must be designed by considering the trade-offs between costs and environmental impact to satisfy manufacturers and environmentalists alike. The cost of returnable packaging entails such items as materials, manufacturing, collection, storage and disposal. Environmental impacts are explicitly linked with solid waste, air pollution, and water pollution. This paper presents a multi-criteria evaluation technique to assist decision-makers for evaluating the trade-offs in costs and environmental impact during the returnable packaging design process. The proposed evaluation technique involves a combination of multiple objective integer linear programming and analytic hierarchy process. A numerical example is used to illustrate the methodology.

Environmentally friendly preparation of metal nanoparticles

Science.gov (United States)

The book chapter summarizes the “state of the art” in the exploitation of various environmentally-friendly synthesis approaches, reaction precursors and conditions to manufacture metal and metal oxide nanoparticles for a vast variety of purposes.

An Environmentally Friendly, Cost-Effective Determination of Lead in Environmental Samples Using Anodic Stripping Voltammetry

Science.gov (United States)

Goldcamp, Michael J.; Underwood, Melinda N.; Cloud, Joshua L.; Harshman, Sean

2008-01-01

Contamination of the environment with heavy metals such as lead presents many health risks. Simple, effective, and field-portable methods for the measurement of toxic metals in environmental samples are vital tools for evaluating the risks that these contaminants pose. This article describes the use of new developments in anodic stripping…

Extrusion: An environmentally friendly process for PEMFC membrane elaboration

Energy Technology Data Exchange (ETDEWEB)

Sanchez, J.-Y.; Iojoiu, C.; Marechal, M. [LEPMI, UMR 5631 CNRS-INPG-UJF, ENSEEG, BP 75, F-38402, Saint Martin d' Heres (France); Chabert, F.; El Kissi, N. [Rheologie, UMR 5520 CNRS-INPG-UJF, ENSHMG, BP 53, F-38041, Grenoble (France); Salomon, J.; Mercier, R. [LMOPS UMR CNRS 5041, BP 24, F-69390 Vernaison (France); Piffard, Y. [CNRS Universite de Nantes, Institut des Materiaux Jean Rouxel, UMR 6502, BP 32229, F-44322, Nantes Cedex 3 (France); Galiano, H. [CEA, Le Ripault Research Center, BP 16, F-37260, Monts (France)

2007-12-31

The paper deals with the use of extrusion to process PEMFC filled and unfilled membranes. Several routes including the sulfonation of filled and unfilled extruded membranes and the extrusion of filled and unfilled ionomers are reported. Thanks to the use of selected water-soluble aid process plasticizers, acid and alkaline forms of sulfonated polyethersulfone were, for the first time, successfully extruded. The extrusion process did not lead to any degradation of the ionomer performances. Decreasing the membrane cost while using environmentally friendly elaboration conditions, it should be helpful to an industrial production. In addition, avoiding filler sedimentation it should allow homogeneous composite membranes to be obtained. (author)

Field Testing of Environmentally Friendly Drilling System

Energy Technology Data Exchange (ETDEWEB)

David Burnett

2009-05-31

The Environmentally Friendly Drilling (EFD) program addresses new low-impact technology that reduces the footprint of drilling activities, integrates light weight drilling rigs with reduced emission engine packages, addresses on-site waste management, optimizes the systems to fit the needs of a specific development sites and provides stewardship of the environment. In addition, the program includes industry, the public, environmental organizations, and elected officials in a collaboration that addresses concerns on development of unconventional natural gas resources in environmentally sensitive areas. The EFD program provides the fundamentals to result in greater access, reasonable regulatory controls, lower development cost and reduction of the environmental footprint associated with operations for unconventional natural gas. Industry Sponsors have supported the program with significant financial and technical support. This final report compendium is organized into segments corresponding directly with the DOE approved scope of work for the term 2005-2009 (10 Sections). Each specific project is defined by (a) its goals, (b) its deliverable, and (c) its future direction. A web site has been established that contains all of these detailed engineering reports produced with their efforts. The goals of the project are to (1) identify critical enabling technologies for a prototype low-impact drilling system, (2) test the prototype systems in field laboratories, and (3) demonstrate the advanced technology to show how these practices would benefit the environment.

University of Illinois FRIENDS Children’s Environmental Health Center

Data.gov (United States)

Federal Laboratory Consortium — The FRIENDS Children's Environmental Health Center at the University of Illinois, Urbana-Champaign, was established in 2001 to investigate the interactive effects of...

Environmental friendly energy transport media

International Nuclear Information System (INIS)

Wan Nik, W.B.

2002-01-01

Rational self-interest and good environmental citizenship are forcing the development of renewable and environmentally, acceptable working fluids. Fluids that are at least equivalent in performance plus biodegradable have been formulated in Europe and USA rising vegetable oils as base stocks and as innovative additive packages. While much of the research has been made in the field of alternative environmentally, friendly energy, transport media, the thermal stability of vegetable based stock is still a challenging area. This work concentrates more in improving the oxidation stability of the vegetable based stocks. Oven and oil bath test methods were employed in this study. This paper tabled mineral and vegetable oil physical test results and presents thermal stability of oil blends. (Author)

Pre-Service Teacher Opinions about Eco-Friendly Person Activity Package Developed to Raise Environmental Awareness

Science.gov (United States)

Candan, Sevcan; Erten, Sinan

2015-01-01

In this study, the effectiveness of Eco-Friendly Person Activity Package developed in order to raise environmental awareness in pre-service teachers and enable them to be an example of an eco-friendly teacher for their future students, and the responses about Eco-Friendly Person Activity Package were investigated. The study was conducted on 75…

Activism: A Strong Predictor of Proactive Environmentally Friendly Buying Behavior in Turkey

OpenAIRE

Ahu Ergen; Filiz Bozkurt; Caner Giray

2016-01-01

The market for environmentally friendly products in Turkey is growing, and marketing experts are trying to understand the behavior of the consumers in this market with the help of variables such as demographic factors, information, attitudes, values and life styles. This study analyzes the effects of environmental activism, environmental knowledge and the perceived seriousness of environmental problems on green buying behavior. The study involved 516 Turkish consumers, over eighteen years of ...

Why Acting Environmentally-Friendly Feels Good : Exploring the Role of Self-Image

NARCIS (Netherlands)

Venhoeven, Leonie A.; Bolderdijk, Jan Willem; Steg, Linda

2016-01-01

Recent research suggests that engagement in environmentally-friendly behavior can feel good. Current explanations for such a link do not focus on the nature of environmentally-friendly behavior itself, but rather propose well-being is more or less a side-benefit; behaviors that benefit environmental

Integrated cost-effectiveness analysis of agri-environmental measures for water quality.

Science.gov (United States)

Balana, Bedru B; Jackson-Blake, Leah; Martin-Ortega, Julia; Dunn, Sarah

2015-09-15

This paper presents an application of integrated methodological approach for identifying cost-effective combinations of agri-environmental measures to achieve water quality targets. The methodological approach involves linking hydro-chemical modelling with economic costs of mitigation measures. The utility of the approach was explored for the River Dee catchment in North East Scotland, examining the cost-effectiveness of mitigation measures for nitrogen (N) and phosphorus (P) pollutants. In-stream nitrate concentration was modelled using the STREAM-N and phosphorus using INCA-P model. Both models were first run for baseline conditions and then their effectiveness for changes in land management was simulated. Costs were based on farm income foregone, capital and operational expenditures. The costs and effects data were integrated using 'Risk Solver Platform' optimization in excel to produce the most cost-effective combination of measures by which target nutrient reductions could be attained at a minimum economic cost. The analysis identified different combination of measures as most cost-effective for the two pollutants. An important aspect of this paper is integration of model-based effectiveness estimates with economic cost of measures for cost-effectiveness analysis of land and water management options. The methodological approach developed is not limited to the two pollutants and the selected agri-environmental measures considered in the paper; the approach can be adapted to the cost-effectiveness analysis of any catchment-scale environmental management options. Copyright © 2015 Elsevier Ltd. All rights reserved.

Aluminium alloyed iron-silicide/silicon solar cells: A simple approach for low cost environmental-friendly photovoltaic technology.

Science.gov (United States)

Kumar Dalapati, Goutam; Masudy-Panah, Saeid; Kumar, Avishek; Cheh Tan, Cheng; Ru Tan, Hui; Chi, Dongzhi

2015-12-03

This work demonstrates the fabrication of silicide/silicon based solar cell towards the development of low cost and environmental friendly photovoltaic technology. A heterostructure solar cells using metallic alpha phase (α-phase) aluminum alloyed iron silicide (FeSi(Al)) on n-type silicon is fabricated with an efficiency of 0.8%. The fabricated device has an open circuit voltage and fill-factor of 240 mV and 60%, respectively. Performance of the device was improved by about 7 fold to 5.1% through the interface engineering. The α-phase FeSi(Al)/silicon solar cell devices have promising photovoltaic characteristic with an open circuit voltage, short-circuit current and a fill factor (FF) of 425 mV, 18.5 mA/cm(2), and 64%, respectively. The significant improvement of α-phase FeSi(Al)/n-Si solar cells is due to the formation p(+-)n homojunction through the formation of re-grown crystalline silicon layer (~5-10 nm) at the silicide/silicon interface. Thickness of the regrown silicon layer is crucial for the silicide/silicon based photovoltaic devices. Performance of the α-FeSi(Al)/n-Si solar cells significantly depends on the thickness of α-FeSi(Al) layer and process temperature during the device fabrication. This study will open up new opportunities for the Si based photovoltaic technology using a simple, sustainable, and los cost method.

French adolescents' environmental friendly behaviour

OpenAIRE

Schleyer-Lindenmann, Alexandra

2012-01-01

International audience; Environmental friendly behavior and attitudes have been studied in social sciences since the 1970 with the awakening of an « ecological consciousness ». Psychology has been actively taking part in these studies since then (Maloney & Ward, 1973, Oskamp, 2000, Schmuck & Schultz, 2002). Bronfenbrenner (1979) in his nested system approach, sees the person as seen as a developing entity, in constant interaction with different developing environments. We therefore propose to...

Development of environmentally friendly briquettes

International Nuclear Information System (INIS)

Kleisa, K.; Lehmann, J.; Verfuss, F.; Simon, G.

1994-01-01

The DMT has developed an industrial briquette consisting of about 87% hardcoal, 7% molasses pulp and 6% hydration limestone which meets the requirements of the clean air authority as an environmentally friendly fuel for travelling grate boilers. In extensive tests in a 4.4 MW travelling grate boiler these briquettes with molasses and limestone additives proved to be particularly effective in terms of reducing sulphur dioxide emission in the flue gas. They exhibited good ignition and combustion behaviour as well as a considerable reduction in nitrogen oxide emission. In a large-scale test with 1000 t of briquettes in a 46.5 MW travelling grate furnace it proved possible to confirm the good combustion behaviour and the reduced emission of sulphur oxide and nitrogen oxide in the flue gas. (orig.) [de

Transport-related lifestyle and environmentally-friendly travel mode choices

DEFF Research Database (Denmark)

Thøgersen, John

2018-01-01

. Finally, a multivariate GLM analysis reveals that three behavioral tendencies of importance for transport-related environmental impacts vary significantly and substantially between lifestyle segments: vehicle ownership, everyday travel-mode choice and environmentally-friendly transport innovativeness...

Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

Science.gov (United States)

Pearman, B. P.; Calle, L. M.; Zhang, X.; Li, W.; Buhrow, J. W.; Johnsey, M. N.; Montgomery, E. L.; Fitzpatrick, L.; Surma, J. M.

2015-01-01

The NASA Kennedy Space Center's Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion indicators, inhibitors and self-healing agents. This allows the incorporation of autonomous corrosion control functionalities, such as corrosion detection and inhibition as well as the self-healing of mechanical damage, into coatings. This paper presents technical details on the characterization of inhibitor-containing particles and their corrosion inhibitive effects using electrochemical and mass loss methods. Three organic environmentally friendly corrosion inhibitors were encapsulated in organic microparticles that are compatible with desired coatings. The release of the inhibitors from the microparticles in basic solution was studied. Fast release, for immediate corrosion protection, as well as long-term release for continued protection, was observed. The inhibition efficacy of the inhibitors, incorporated directly and in microparticles, on carbon steel was evaluated. Polarization curves and mass loss measurements showed that, in the case of 2MBT, its corrosion inhibition effectiveness was greater when it was delivered from microparticles.

Research program for an environmentally-friendly coal utilization system in the Philippines

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Feasibility studies are conducted on the introduction of an environmentally-friendly coal utilization system into the Filipino electric power industry, cement industry, and domestic fuel sector. The studies cover the current status of economy and energy in that country, supply and demand of coal, environmental protection and Government's policy, study of the above-said system relative to its application to the fields of electric power industry, cement industry, and domestic fuel sector, and a study about the effective utilization of Filipino domestic coal by the use of the system. Imported coal is used in the electric power industry because of its cost and quality. It is learned after research, however, that domestic coal will be able to compete against imported coal when some technologies are resorted to, such as those pertinent to denitrification in the furnace, novel low-NOx burner, coal pulverization, and combustion diagnosis. As for the treatment of flue gas, it is concluded that the simplified wet lime/gypsum process will be suitable. It is inferred that the CWM (coal-water mixture) process technology will be effective for the utilization of domestic low-grade coal. (NEDO)

Research program for an environmentally-friendly coal utilization system in the Philippines

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Feasibility studies are conducted on the introduction of an environmentally-friendly coal utilization system into the Filipino electric power industry, cement industry, and domestic fuel sector. The studies cover the current status of economy and energy in that country, supply and demand of coal, environmental protection and Government's policy, study of the above-said system relative to its application to the fields of electric power industry, cement industry, and domestic fuel sector, and a study about the effective utilization of Filipino domestic coal by the use of the system. Imported coal is used in the electric power industry because of its cost and quality. It is learned after research, however, that domestic coal will be able to compete against imported coal when some technologies are resorted to, such as those pertinent to denitrification in the furnace, novel low-NOx burner, coal pulverization, and combustion diagnosis. As for the treatment of flue gas, it is concluded that the simplified wet lime/gypsum process will be suitable. It is inferred that the CWM (coal-water mixture) process technology will be effective for the utilization of domestic low-grade coal. (NEDO)

MONNIE 2000: A description of a model to calculate environmental costs

International Nuclear Information System (INIS)

Hanemaaijer, A.H.; Kirkx, M.C.A.P.

2001-02-01

A new model (MONNIE 2000) was developed by the RIVM in the Netherlands in 2000 to calculate environmental costs on a macro level. The model, it's theoretical backgrounds and the technical aspects are described, making it attractive to both the user and the designer of the model. A user manual on how to calculate with the model is included. The basic principle of the model is the use of a harmonised method for calculating environmental costs, which provides the user with an output that can easily be compared with and used in other economic statistics and macro-economic models in the Netherlands. Input for the model are yearly figures on operational costs, investments and savings from environmental measures. With MONNIE 2000 calculated environmental costs per policy target group, economic sector and theme can be shown, With this model the burden of environmental measures on the economic sectors and the environmental expenditures of the government can be presented as well. MONNIE 2000 is developed in Visual Basic and by using Excel as input and output a user-friendly data exchange is realised. 12 refs

A standard methodology for cost-effectiveness analysis of new environmental technologies

International Nuclear Information System (INIS)

Booth, S.R.; Trocki, L.K.; Bowling, L.

1994-01-01

This paper outlines a methodology that is being applied to assess the cost-effectiveness of new environmental technologies under development by EM-50, DOE. Performance, total system effects, and life-cycle costs are all considered in the methodology to compare new technologies with existing or base-line technologies. An example of performance characterization is given in the paper. Sources of data for cost estimates and technology characterizations also appear in the paper. The Department of Energy (DOE) is facing a massive clean up effort of waste sites that contain hazardous, radioactive, or mixed materials. DOE has recognized that improvements in environmental restoration and waste management methods can potentially save the taxpayers billions of dollars as older, less-effective technologies are displaced. Consequently, DOE has targeted significant funding to search for new technologies and to test and demonstrate them in rapid and cost-effective manner with the goal of applying them quickly to address environmental problems

Electrochemical Behaviour of Environmentally Friendly Inhibitor of ...

African Journals Online (AJOL)

Electrochemical Behaviour of Environmentally Friendly Inhibitor of Aloe Secundiflora Extract in Corrosion Control of Carbon Steel in Soft Water Media. ... The investigation was performed at different inhibitor concentrations under static and dynamic conditions using a Rotating Disk Electrode (RDE). The impedance and ...

Environment-friendly drilling operation technology

Science.gov (United States)

Luo, Huaidong; Jing, Ning; Zhang, Yanna; Huang, Hongjun; Wei, Jun

2017-01-01

Under the circumstance that international safety and environmental standards being more and more stringent, drilling engineering is facing unprecedented challenges, the extensive traditional process flow is no longer accepted, the new safe and environment-friendly process is more suitable to the healthy development of the industry. In 2015, CNPCIC adopted environment-friendly drilling technology for the first time in the Chad region, ensured the safety of well control, at the same time increased the environmental protection measure, reduced the risk of environmental pollution what obtain the ratification from local government. This technology carries out recovery and disposal of crude oil, cuttings and mud without falling on the ground. The final products are used in road and well site construction, which realizes the reutilization of drilling waste, reduces the operating cost, and provides a strong technical support for cost-cutting and performance-increase of drilling engineering under low oil price.

A Summary of Environmentally Friendly Turbine Design Concepts

Energy Technology Data Exchange (ETDEWEB)

Odeh, Mufeed [United States Geological Survey - BRD, Turners Falls, MA (United States)

1999-07-01

The Advanced Hydropower Turbine System Program (AHTS) was created in 1994 by the U.S. Department of Energy, Electric Power Research Institute, and the Hydropower Research Foundation. The Program’s main goal is to develop “environmentally friendly” hydropower turbines. The Program’s first accomplishment was the development of conceptual designs of new environmentally friendly turbines. In order to do so, two contractors were competitively selected. The ARL/NREC team of engineers and biologists provided a conceptual design for a new turbine runner*. The new runner has the potential to generate hydroelectricity at close to 90% efficiency. The Voith team produced new fish-friendly design criteria for Kaplan and Francis turbines that can be incorporated in units during rehabilitation projects or in new hydroelectric facilities**. These include the use of advanced plant operation, minimum gap runners, placement of wicket gates behind stay vanes, among others. The Voith team will also provide design criteria on aerating Francis turbines to increase dissolved oxygen content. Detailed reviews of the available literature on fish mortality studies, causation of injuries to fish, and available biological design criteria that would assist in the design of fish-friendly turbines were performed. This review identified a need for more biological studies in order to develop performance criteria to assist turbine manufacturers in designing a more fish-friendly turbine.

Effective and Environmentally Friendly Nickel Coating on the Magnesium Alloy

Directory of Open Access Journals (Sweden)

Ivana Škugor Rončević

2016-12-01

Full Text Available The low density and good mechanical properties make magnesium and its alloys attractive construction materials in the electronics, automotive, and aerospace industry, together with application in medicine due to their biocompatibility. Magnesium AZ91D alloy is an alloy with a high content of aluminum, whose mechanical properties overshadow the low corrosion resistance caused by the composition of the alloy and the existence of two phases: α magnesium matrix and β magnesium aluminum intermetallic compound. To improve the corrosion resistance, it is necessary to find an effective protection method for the alloy surface. Knowing and predicting electrochemical processes is an essential for the design and optimization of protective coatings on magnesium and its alloys. In this work, the formations of nickel protective coatings on the magnesium AZ91D alloy surface by electrodeposition and chemical deposition, are presented. For this purpose, environmentally friendly electrolytes were used. The corrosion resistance of the protected alloy was determined in chloride medium using appropriate electrochemical techniques. Characterization of the surface was performed with highly sophisticated surface-analytical methods.

Environmentally friendly wood preservatives formulated with enzymatic-hydrolyzed okara, copper and/or boron salts

International Nuclear Information System (INIS)

Ahn, Sye Hee; Oh, Sei Chang; Choi, In-gyu; Han, Gyu-seong; Jeong, Han-seob; Kim, Ki-woo; Yoon, Young-ho; Yang, In

2010-01-01

Novel biocides, such as copper azole (CuAz) and ammoniacal copper quaternary (ACQ), are extensively used as substitutes for chromate copper arsenate (CCA) in wood preservation. However, the expense of these biocides has necessitated the development of cost-effective and environmentally friendly wood preservatives. This study was conducted to investigate the effectiveness against decaying fungi of the preservatives formulated with enzymatic-hydrolyzed okara (OK), which is an organic waste produced from the manufacture of tofu, CuCl 2 (CC) and/or Na 2 B 4 O 7 .10H 2 O (B). With the addition of NH 4 OH as a dissociating agent, the addition of OK facilitated the target retention of most of the OK/CC and OK/CC/B preservative formulations in wood blocks. The OK-based wood preservatives (OK-WPs) were stable against hot-water leaching. When compared with control and CC-treated wood blocks, the leached wood blocks treated with OK/CC and OK/CC/B formulations showed excellent decay resistance against both Postia placenta and Gloeophyllum trabeum, especially when OK was hydrolyzed by Celluclast at a loading level of 0.1 ml/g. Scanning electron microscopy (SEM) and SEM-energy dispersive X-ray (SEM-EDX) spectrometry analyses demonstrated that preservative complexes, such as OK-CC and OK-CC-B, existed in the wood blocks treated with OK/CC and OK/CC/B formulations. This study results support the potential application of OK-WPs as environmentally friendly wood preservatives capable of replacing CuAz and ACQ.

Environmentally friendly wood preservatives formulated with enzymatic-hydrolyzed okara, copper and/or boron salts

Energy Technology Data Exchange (ETDEWEB)

Ahn, Sye Hee; Oh, Sei Chang [Department of Forest Resources, Daegu University, Gyeongsan 712-714 (Korea, Republic of); Choi, In-gyu [Department of Forest Sciences, Seoul National University, Seoul 151-921 (Korea, Republic of); Han, Gyu-seong [Department of Wood and Paper Sciences, Chungbuk National University, Cheongju 361-763 (Korea, Republic of); Jeong, Han-seob [Department of Forest Sciences, Seoul National University, Seoul 151-921 (Korea, Republic of); Kim, Ki-woo [National Instrumentation Center for Environmental Management, Seoul National University, Seoul 151-921 (Korea, Republic of); Yoon, Young-ho [KCI Co. Ltd., Seosan, Chungcheongnam-do 356-874 (Korea, Republic of); Yang, In, E-mail: dahadad2000@yahoo.com [Research Institute for Agriculture and Life Sciences, Seoul National University, San 56-1 Sillim-Dong, Kwanak-gu, Seoul 151-921 (Korea, Republic of)

2010-06-15

Novel biocides, such as copper azole (CuAz) and ammoniacal copper quaternary (ACQ), are extensively used as substitutes for chromate copper arsenate (CCA) in wood preservation. However, the expense of these biocides has necessitated the development of cost-effective and environmentally friendly wood preservatives. This study was conducted to investigate the effectiveness against decaying fungi of the preservatives formulated with enzymatic-hydrolyzed okara (OK), which is an organic waste produced from the manufacture of tofu, CuCl{sub 2} (CC) and/or Na{sub 2}B{sub 4}O{sub 7}.10H{sub 2}O (B). With the addition of NH{sub 4}OH as a dissociating agent, the addition of OK facilitated the target retention of most of the OK/CC and OK/CC/B preservative formulations in wood blocks. The OK-based wood preservatives (OK-WPs) were stable against hot-water leaching. When compared with control and CC-treated wood blocks, the leached wood blocks treated with OK/CC and OK/CC/B formulations showed excellent decay resistance against both Postia placenta and Gloeophyllum trabeum, especially when OK was hydrolyzed by Celluclast at a loading level of 0.1 ml/g. Scanning electron microscopy (SEM) and SEM-energy dispersive X-ray (SEM-EDX) spectrometry analyses demonstrated that preservative complexes, such as OK-CC and OK-CC-B, existed in the wood blocks treated with OK/CC and OK/CC/B formulations. This study results support the potential application of OK-WPs as environmentally friendly wood preservatives capable of replacing CuAz and ACQ.

The Behavior of Environmentally Friendly Corrosion Preventative Compounds in an Aggressive Coastal Marine Environment

Science.gov (United States)

Montgomery, Eliza L.; Calle, Luz Marina; Curran Jerome C.; Kolody, Mark R.

2013-01-01

The shift to use environmentally friendly technologies throughout future space-related launch programs prompted a study aimed at replacing current petroleum and solvent-based Corrosion Preventive Compounds (CPCs) with environmentally friendly alternatives. The work in this paper focused on the identification and evaluation of environmentally friendly CPCs for use in protecting flight hardware and ground support equipment from atmospheric corrosion. The CPCs, while a temporary protective coating, must survive in the aggressive coastal marine environment that exists throughout the Kennedy Space Center, Florida. The different protection behaviors of fifteen different soft film CPCs, both common petroleum-based and newer environmentally friendly types, were evaluated on various steel and aluminum substrates. The CPC and substrate systems were subjected to atmospheric testing at the Kennedy Space Center's Beachside Atmospheric Corrosion Test Site, as well as cyclic accelerated corrosion testing. Each CPC also underwent physical characterization and launch-related compatibility testing . The initial results for the fifteen CPC systems are reported : Key words: corrosion preventive compound, CPC, spaceport, environmentally friendly, atmospheric exposure, marine, carbon steel, aluminum alloy, galvanic corrosion, wire on bolt.

Designing advanced materials by environmental friendly plasma electrolytic oxidation

International Nuclear Information System (INIS)

Toader, I.; Valeca, M.; Rusu, O.; Coaca, E.; Marin, A.

2016-01-01

In the CANDU-PHWR nuclear reactors, Zr-2.5Nb coated with a black adherent oxide film of 1 to 2 μm in thickness is currently used for the manufacture of pressure tubes. The black oxide thin film has corrosion protective properties. However, it can be damaged during the regular refueling process, thus causing hydrogen/oxygen ingression. Therefore, an enhanced wear and corrosion resistance coating is needed. Plasma electrolytic oxidation (PEO) is an anodic electrochemical treatment, both cost-effective and environmentally friendly, widely used in the formation of a protective oxide film on the metal surface to enhance wear and corrosion resistance as well as prolonging component lifetime. The state of the art reveals that PEO method is suitable for improving the wear resistance of Zr-2.5Nb alloy. Few studies are performed in this field and thus, it is necessary to conduct a more detailed insight study on the processing parameters for PEO treatment. By understanding the influence of process parameters, such as electrolyte temperature and electrolyte composition, we can find the way to obtain a coating with improved mechanical and corrosion properties on zirconium alloys. (authors)

Novel environmentally friendly synthesis of superparamagnetic magnetite nanoparticles using mechanochemical effect

International Nuclear Information System (INIS)

Iwasaki, Tomohiro; Kosaka, Kazunori; Watano, Satoru; Yanagida, Takeshi; Kawai, Tomoji

2010-01-01

A novel method for synthesizing superparamagnetic magnetite nanoparticles in water system via coprecipitation under an environmentally friendly condition has been developed. In this method, an almost neutral suspension containing ferrous hydroxide and goethite is used as the starting suspension and subjected to a ball-milling treatment. The product was characterized by transmission electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, dynamic light scattering, superconducting quantum interference device magnetometry, and Moessbauer spectroscopy. The mechanochemical effect generated by the ball-milling treatment promoted the reaction between ferrous hydroxide and goethite even at room temperature, resulting in the formation of homogeneous magnetite nanoparticles. Simultaneously, it also contributed to crystallize the formed magnetite nanoparticles while inhibiting the particle growth. This resulted in the formation of ultrafine magnetite nanoparticles of about 10 nm having a single crystal structure. This method could provide ferromagnetic magnetite nanoparticles with superparamagnetism under the moderate condition without neither heating nor any additives such as surfactant and organic solvent.

The new heating. Environmental-friendly and effectively heating with natural gas, wood, electricity and solar power; Die neue Heizung. Umweltfreundlich und wirtschaftlich heizen mit Gas, Holz, Strom und Sonnenenergie

Energy Technology Data Exchange (ETDEWEB)

Schulz, Marion; Westkaemper, Hubert

2013-02-01

Comfortable, climate-friendly and cost-effective heating technologies inclusive preparation of hot water and ventilation systems: Which technology is the best, most economical and most environmental one? Which fuel is economic as well as assured of a good future, if a new building or an energetically retrofitted old building is equipped with a heating system? These are the key issues for the house owners / building owners, planners, consultants and craftsmen. The book under consideration tries to answer these questions. Construction, planning benchmark figures and operational areas of modern heating technologies are described. The costs, the environmental pollutions and the economic efficiency of the most important systems are compared. The book contains hints on the decisive details of modern, energy saving system engineering including hot water preparation and ventilation technology. This handbook is suited for the selection and planning of energy saving and future-oriented heating systems.

Efficacy and cost-effectiveness of environmental management for malaria control.

Science.gov (United States)

Utzinger, J; Tozan, Y; Singer, B H

2001-09-01

Roll back malaria (RBM) aims at halving the current burden of the disease by the year 2010. The focus is on sub-Saharan Africa, and it is proposed to implement efficacious and cost-effective control strategies. But the evidence base of such information is scarce, and a notable missing element is the discussion of the potential of environmental management. We reviewed the literature and identified multiple malaria control programmes that incorporated environmental management as the central feature. Prominent among them are programmes launched in 1929 and implemented for two decades at copper mining communities in Zambia. The full package of control measures consisted of vegetation clearance, modification of river boundaries, draining swamps, oil application to open water bodies and house screening. Part of the population also was given quinine and was sleeping under mosquito nets. Monthly malaria incidence rates and vector densities were used for surveillance and adaptive tuning of the environmental management strategies to achieve a high level of performance. Within 3-5 years, malaria-related mortality, morbidity and incidence rates were reduced by 70-95%. Over the entire 20 years of implementation, the programme had averted an estimated 4173 deaths and 161,205 malaria attacks. The estimated costs per death and malaria attack averted were US$ 858 and US$ 22.20, respectively. Over the initial 3-5 years start-up period, analogous to the short-duration of cost-effectiveness analyses of current studies, we estimated that the costs per disability adjusted life year (DALY) averted were US$ 524-591. However, the strategy has a track record of becoming cost-effective in the longer term, as maintenance costs were much lower: US$ 22-92 per DALY averted. In view of fewer adverse ecological effects, increased sustainability and better uses of local resources and knowledge, environmental management--integrated with pharmacological, insecticidal and bednet interventions

Evaluation of caregiver-friendly workplace policy (CFWPs) interventions on the health of full-time caregiver employees (CEs): implementation and cost-benefit analysis.

Science.gov (United States)

Williams, Allison M; Tompa, Emile; Lero, Donna S; Fast, Janet; Yazdani, Amin; Zeytinoglu, Isik U

2017-09-20

Current Canadian evidence illustrating the health benefits and cost-effectiveness of caregiver-friendly workplace policies is needed if Canadian employers are to adopt and integrate caregiver-friendly workplace policies into their employment practices. The goal of this three-year, three study research project is to provide such evidence for the auto manufacturing and educational services sectors. The research questions being addressed are: What are the impacts for employers (economic) and workers (health) of caregiver-friendly workplace policy intervention(s) for full-time caregiver-employees? What are the impacts for employers, workers and society of the caregiver-friendly workplace policy intervention(s) in each participating workplace? What contextual factors impact the successful implementation of caregiver-friendly workplace policy intervention(s)? Using a pre-post-test comparative case study design, Study A will determine the effectiveness of newly implemented caregiver-friendly workplace policy intervention(s) across two workplaces to determine impacts on caregiver-employee health. A quasi-experimental pre-post design will allow the caregiver-friendly workplace policy intervention(s) to be tested with respect to potential impacts on health, and specifically on caregiver employee mental, psychosocial, and physical health. Framed within a comparative case study design, Study B will utilize cost-benefit and cost-effectiveness analysis approaches to evaluate the economic impacts of the caregiver-friendly workplace policy intervention(s) for each of the two participating workplaces. Framed within a comparative case study design, Study C will undertake an implementation analysis of the caregiver-friendly workplace policy intervention(s) in each participating workplace in order to determine: the degree of support for the intervention(s) (reflected in the workplace culture); how sex and gender are implicated; co-workers' responses to the chosen intervention(s), and

Consumer Purchase Behaviour Toward Environmentally Friendly Products in Japan

OpenAIRE

Udo, Miyako

2007-01-01

This study considers consumer purchase behaviour toward environmentally friendly products in Japan and focuses on factors which can influence environmentally responsible purchase decision making. The modified theory of planned behaviour based on previous research in the area of environmentally responsible purchase behaviour and ethical purchase decision making is applied to examine factors affecting the purchase decision making and key findings from the present study are highlighted. It can b...

A proposed tool to integrate environmental and economical assessments of products

International Nuclear Information System (INIS)

Senthil, Kumaran D.; Ong, S.K.; Nee, A.Y.C.; Tan, Reginald B.H.

2003-01-01

An attempt has been made to interpret the outcomes of a Life Cycle Assessment (LCA) in terms of environmental costs. This attempt ensures the environmental accountability of the products while LCA ensures their eco-friendly nature. Keeping this as an objective, a Life Cycle Environmental Cost Analysis (LCECA) model was developed. This new tool incorporates costing into the LCA practice. This model prescribes a life cycle environmental cost model to estimate and correlate the effects of these costs in all the life cycle stages of the product. The newly developed categories of eco-costs are: costs of effluent treatment/control/disposal, environmental management systems, eco-taxes, rehabilitation, energy and savings of recycling and reuse strategies. The mathematical model of LCECA determines quantitative expressions between the total cost of products and the various eco-costs. The eco-costs of the alternatives are compared with the computational LCECA model. This method enables the environmental as well as the economic assessment of products, which leads to cost-effective, eco-friendly design of products

Environmental-friendly wool fabric finishing by some water plant extracts

Directory of Open Access Journals (Sweden)

Šmelcerović Miodrag

2007-01-01

Full Text Available In this article, environmental-friendly finishing of wool fabric were processed with several water extract plants, such as hibiscus, St. John's wort, and marigold. The plant extracts have good basis in the commercial dyeing of wool, for garment and carpet industry. At the same time, the environmental-friendly finishing by water extracts plants shows very good fastness of the antimicrobial properties and coloration of wool fabric. From an ecological viewpoint, the substitution of chemical dyes with "natural products" may represent not only a strategy to reduce risk and pollutants but also an opportunity for new markets and new businesses, which can expend involving of ecology in trade policy.

Development and Substantiation of Parameters of Environmentally Friendly Technology for Filling the Vertical Mine Workings with Autoclaved Slag-Concrete

Directory of Open Access Journals (Sweden)

Uglyanitca Andrey

2017-01-01

Full Text Available The environmentally friendly technology for filling the vertical mine workings with autoclaved slag-concrete, prefabricated on the surface of the mine is presented in the article; the optimal parameters of filling technology are proposed. The developed technology for filling the abandoned vertical mine workings allows ensuring the environmental safety of the territories adjacent to the abandoned mine, utilizing slag dumps and providing the possibility of shaft recovery, if necessary, with minimal labor and material costs.

Environmentally Friendly Pretreatment for Department of Defense Applications

Science.gov (United States)

2012-08-29

Develop an environmentally friendly pretreatment system for multi-material Department of Defense applications ― Free of hexavalent chromium (Cr6...Zn phosphate and chrome wash primer •Two Zirconium pretreatment variations passed the 336 hr and 1000 hr B-117 outlined per MIL-DTL-53022 or MIL

Comparison of the microbiological quality of environmentally friendly and conventionally grown vegetables sold at retail markets in Korea.

Science.gov (United States)

Ryu, Jee-Hoon; Kim, Minju; Kim, Eun-Gyeong; Beuchat, Larry R; Kim, Hoikyung

2014-09-01

Fresh produce is usually eaten raw without cooking or heating, which may increase the probability of foodborne infection. The microbiological quality of 11 types of fresh, raw vegetables (romaine lettuce, sesame leaves, crown daisy, garlic chives, iceberg lettuce, cabbage, broccoli, leek, chili pepper, capsicum, and zucchini) purchased at retail markets in Iksan, Korea as affected by cultivation method (environmentally friendly vegetables [organic, pesticide-free, and low-pesticide vegetables] and conventionally grown vegetables) and harvest season was determined. Escherichia coli O157:H7 and Salmonella were not detected in all samples of vegetables tested. Aerobic mesophiles (>6 log cfu/g) were detected in environmentally friendly romaine lettuce and crown daisy and environmentally friendly and conventionally grown garlic chives, which also contained coliforms (>3 log cfu/g). Sesame leaf and crown daisy (regardless of cultivation method), as well as conventionally grown romaine lettuce and leek, contained >1 log cfu/g of E. coli. The overall microbiological quality of environmentally friendly and conventionally grown vegetables was not significantly different (P > 0.05). However, there were seasonal effects on populations of coliforms and generic E. coli on vegetables. The greatest numbers of microorganisms were isolated from environmentally friendly or conventionally grown vegetables purchased in winter. The vegetables, regardless of cultivation method or season, should be subjected to appropriate antimicrobial treatment to enhance their microbial safety. © 2014 Institute of Food Technologists®

Environmental Friendly Coatings and Corrosion Prevention For Flight Hardware Project

Science.gov (United States)

Calle, Luz

2014-01-01

Identify, test and develop qualification criteria for environmentally friendly corrosion protective coatings and corrosion preventative compounds (CPC's) for flight hardware an ground support equipment.

Evaluation of caregiver-friendly workplace policy (CFWPs interventions on the health of full-time caregiver employees (CEs: implementation and cost-benefit analysis

Directory of Open Access Journals (Sweden)

Allison M. Williams

2017-09-01

Full Text Available Abstract Background Current Canadian evidence illustrating the health benefits and cost-effectiveness of caregiver-friendly workplace policies is needed if Canadian employers are to adopt and integrate caregiver-friendly workplace policies into their employment practices. The goal of this three-year, three study research project is to provide such evidence for the auto manufacturing and educational services sectors. The research questions being addressed are: What are the impacts for employers (economic and workers (health of caregiver-friendly workplace policy intervention(s for full-time caregiver-employees? What are the impacts for employers, workers and society of the caregiver-friendly workplace policy intervention(s in each participating workplace? What contextual factors impact the successful implementation of caregiver-friendly workplace policy intervention(s? Methods Using a pre-post-test comparative case study design, Study A will determine the effectiveness of newly implemented caregiver-friendly workplace policy intervention(s across two workplaces to determine impacts on caregiver-employee health. A quasi-experimental pre-post design will allow the caregiver-friendly workplace policy intervention(s to be tested with respect to potential impacts on health, and specifically on caregiver employee mental, psychosocial, and physical health. Framed within a comparative case study design, Study B will utilize cost-benefit and cost-effectiveness analysis approaches to evaluate the economic impacts of the caregiver-friendly workplace policy intervention(s for each of the two participating workplaces. Framed within a comparative case study design, Study C will undertake an implementation analysis of the caregiver-friendly workplace policy intervention(s in each participating workplace in order to determine: the degree of support for the intervention(s (reflected in the workplace culture; how sex and gender are implicated; co

Cost effectiveness studies of environmental technologies: Volume 1

International Nuclear Information System (INIS)

Silva, E.M.; Booth, S.R.

1994-02-01

This paper examines cost effectiveness studies of environmental technologies including the following: (1) In Situ Air Stripping, (2) Surface Towed Ordinance Locator System, (3) Ditch Witch Horizontal Boring Technology, (4) Direct Sampling Ion Trap Mass Spectrometer, (5) In Situ Vitrification, (6) Site Characterization and Analysis Penetrometer System, (7) In Situ Bioremediation, and (8) SEAMIST Membrane System Technology

Design of environmentally friendly calcium sulfate-based building materials : towards an improved indoor air quality

NARCIS (Netherlands)

Yu, Q.

2012-01-01

This thesis addresses the performance based design and development of an environmentally friendly calcium sulfate-based indoor building product towards an improved indoor air quality. Here "environmental friendly" is referred to the environment related subjects including: (1) the selection of raw

The Impact of Individual Attitudinal and Organisational Variables on Workplace Environmentally Friendly Behaviours

OpenAIRE

Manika, D; Wells, VK; Gregory-Smith, D; Gentry, M

2015-01-01

Although research on corporate social responsibility (CSR) has grown steadily, little research has focused on CSR at the individual level. In addition, research on the role of environmental friendly organizational citizenship behaviors (OCBs) within CSR initiatives is scarce. In response to this gap and recent calls for further research on both individual and organizational variables of employees' environmentally friendly, or green, behaviors, this article sheds light on the influence of thes...

An easy and environmentally-friendly approach to superamphiphobicity of aluminum surfaces

Science.gov (United States)

Deng, R.; Hu, Y. M.; Wang, L.; Li, Zh. H.; Shen, T.; Zhu, Y.; Xiang, J. Zh.

2017-04-01

Superamphiphobic Al surfaces were achieved via an easy and environmentally-friendly approach. Aqueous mixed solution of 0.7 M CuSO4 and 1 M NaCl was used to etch polished Al surfaces to fabricate a rough morphology distributed with microscale step-like pits. The uniformly distributed nanoscale petals covered on the microscale pits were obtained by subsequent 96 °C hot deionized water bathing for 13 min. Thus, the hierarchical micro/nanometer scale roughness was formed which provided the structural basic of superamphiphobic Al surfaces. By 1H, 1H, 2H, 2H-Perfluorodecyl-triethoxysilane (PFDTS) derivatization, desirable superamphiphobic Al surfaces were achieved with the highest static contact angles of 162° for water, 156° for peanut oil, respectively. Meanwhile, the sliding angles were lower than 10° for both water and peanut oil droplets. The as-prepared Al surfaces were investigated by field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and optical contact angle measurements. The FE-SEM images of as-prepared Al surfaces showed a hierarchical micro/nanometer scale morphology. XPS analyses demonstrated the PFDTS derivitization on Al surfaces. The superamphiphobic Al surfaces presented good mechanical durability and chemical stability which have a wide range of applications in fields such as self-cleaning, anti-icing, anti-corrosion, oil transportation, energy harvesting, microfluidics, and so forth. The approach reported in this paper may easily realize the industrial production of superamphiphobic Al surfaces owing to the advantage of facile, low cost and environmentally-friendly.

Energy cost unit of street and park lighting system with solar technology for a more friendly city

Science.gov (United States)

Warman, E.; Nasution, F. S.; Fahmi, F.

2018-03-01

Street and park lighting system is part of a basic infrastructure need to be available in such a friendly city. Enough light will provide more comfort to citizens, especially at night since its function to illuminate roads and park environments around the covered area. The necessity to add more and more lighting around the city caused the rapid growth of the street and park lighting system while the power from PLN (national electricity company) is insufficient and the cost is getting higher. Therefore, it is necessary to consider other energy sources that are economical, environmentally friendly with good continuity. Indonesia, which located on the equator, have benefited from getting solar radiation throughout the year. This free solar radiation can be utilized as an energy source converted by solar cells to empower street and park lighting system. In this study, we planned the street and park lighting with solar technology as alternatives. It was found that for Kota Medan itself, an average solar radiation intensity of 3,454.17 Wh / m2 / day is available. By using prediction and projection method, it was calculated that the energy cost unit for this system was at Rp 3,455.19 per kWh. This cost was higher than normal energy cost unit but can answer the scarcity of energy availability for street and park lighting system

Characterization of Encapsulated Corrosion Inhibitors Containing Microparticles for Environmentally Friendly Smart Coatings

Science.gov (United States)

Pearman, Benjamin Pieter; Calle, Luz M.

2015-01-01

This poster presents the results obtained from experiments designed to evaluate the release properties, as well as the corrosion inhibition effectiveness, of several encapsulated corrosion inhibitors. Microencapsulation has been used in the development of environmentally friendly multifunctional smart coatings. This technique enables the incorporation of autonomous corrosion detection, inhibition and self-healing functionalities into many commercially available coating systems. Select environmentally friendly corrosion inhibitors were encapsulated in organic and inorganic pH-sensitive microparticles and their release in basic solutions was studied. The release rate results showed that the encapsulation can be tailored from fast, for immediate corrosion protection, to slow, which will provide continued long-term corrosion protection. The incorporation of several corrosion inhibitor release profiles into a coating provides effective corrosion protection properties. To investigate the corrosion inhibition efficiency of the encapsulated inhibitors, electrochemical techniques were used to obtain corrosion potential, polarization curve and polarization resistance data. These measurements were performed using the free as well as the encapsulated inhibitors singly or in combinations. Results from these electrochemical tests will be compared to those obtained from weight loss and other accelerated corrosion experiments.

Testing of environmentally friendly lubricants for sheet metal forming

DEFF Research Database (Denmark)

Bay, Niels; Olsson, David Dam; Andreasen, Jan Lasson

2005-01-01

the authors have especially been involved in the development of a system of test methods for sheet metal forming and in testing of friction and limits of lubrication of new, environmentally friendly lubricants. An overview of the developed tests is presented together with selected results....

Green technological foresight on environmental friendly agriculture: Executive summary

DEFF Research Database (Denmark)

Borch, K.; Christensen, S.; Jørgensen, U.

2005-01-01

Risø and the co-operators have on behalf of the Forest and Nature Agency completed a technological foresight on environmentally friendly agriculture based on green technologies. A technological foresight is a systematic dialogue on how one prepares forfuture challenges, which have not yet manifes...

Possible consequences of changing to a more environmental-friendly steel production in China

International Nuclear Information System (INIS)

Kolstad, Julie Riise

2005-01-01

China is the world's biggest steel producer, the world's biggest steel consumer and the world's biggest polluter. The superpower is forced to change its steel production in a more environmental-friendly way, but necessary measures will be expensive; moreover, they will have consequences far past China's borders. The possible effects are elaborated in the article (ml)

Radioecological implementation of 'environmental friendly' materials alumosilicate origin

International Nuclear Information System (INIS)

Stojanovic, M.; Milojkovic, J.; Grubisic, M.; Iles, D.

2009-01-01

The problem of modern civilization is radionuclide contamination of soil, especially in Serbia.There was NATO aggression when were used munitions with depleted uranium, and after that waste material was deposed on the inhabited and mostly fertile soil. Having in mind that not all activities have been taken that would permanently eliminate the consequences of this radionuclide, means that entering depleted uranium in the food chain is a real danger now. Solving this problem requires a holistic approach including the application of safe and effective 'environmental friendly' materials that are economical, locally available and easily applicable. Our investigations have included testing the efficiency of natural and modified with domestic origin aluminosilicate materials, zeolite, phosphate, bentonite and diatomite for in situ remediation of soil. (author) [sr

Printed environmentally friendly supercapacitors with ionic liquid electrolytes on paper

Science.gov (United States)

Pettersson, F.; Keskinen, J.; Remonen, T.; von Hertzen, L.; Jansson, E.; Tappura, K.; Zhang, Y.; Wilén, C.-E.; Österbacka, R.

2014-12-01

Environmentally friendly supercapacitors are fabricated using commercial grade aluminum coated paper as a substrate and symmetrical activated carbon electrodes as large area electrodes. Different choline chloride-based eutectic solvents are used as electrolyte. These are inexpensive, environmentally friendly and have a larger operating window compared to that of water electrolytes. As the entire device is printed and the materials used are inexpensive, both small- and large-area power sources can be fabricated to be used in cheap, disposable and recyclable devices. Supercapacitors with different eutectic solvents are measured using cyclic charge-discharge and impedance spectroscopy measurements and compared to one widely used and one "green" imidazolium ionic liquid; EMIM:TFSI and EcoEng 212™, respectively. A mixture of ethylene glycol and choline chloride, Glyceline™, show the highest capacitance and power densities of the electrolytes being tested, including the imidazolium alternatives.

Application and Development of an Environmentally Friendly Blast Hole Plug for Underground Coal Mines

Directory of Open Access Journals (Sweden)

Donghui Yang

2018-01-01

Full Text Available Drilling and blasting technology is one of the main methods for pressure relief in deep mining. The traditional method for blasting hole blockage with clay stemming has many problems, which include a large volume of transportation, excess loading time, and high labor intensity. An environmentally friendly blast hole plug was designed and developed. This method is cheap, closely blocks the hole, is quickly loaded, and is convenient for transportation. The impact test on the plug was carried out using an improved split Hopkinson pressure bar test system, and the industrial test was carried out in underground tunnel of coal mine. The tests results showed that, compared with clay stemming, the new method proposed in this paper could prolong the action time of the detonation gas, prevent premature detonation gas emissions, reduce the unit consumption of explosives, improve the utilization ratio, reduce the labor intensity of workers, and improve the effect of rock blasting with low cost of rock breaking.

Industrial Implementation of Environmentally Friendly Nanometal Electroplating Process for Chromium and Copper Beryllium Replacement using Low Cost Pulse Current Power Supplies

Science.gov (United States)

2014-09-10

FINAL REPORT Industrial Implementation of Environmentally Friendly Nanometal Electroplating Process for Chromium and Copper Beryllium...35 3.2 Phase II – Development/Verification that Nanotechnology Based Electroplating Process to Replace EHC/Cu-Be Processes are Compatible With...36 3.3 Phase III – Development of 200kW Power Supply and Compatible Nanostructured Electroplating Processed for Commercialization

Child-Friendly Cities: A Place for Active Citizenship in Geographical and Environmental Education

Science.gov (United States)

Wilks, Judith

2010-01-01

This research was designed to investigate innovative practices associated with child-friendly cities initiatives in the United Kingdom and Italy and how civics and citizenship initiatives are being applied into practical programmes of exploration and learning in geography and environmental education. The Child-Friendly Cities Initiative (CFCI) of…

Tracking environmental costs

International Nuclear Information System (INIS)

Blahutova, Z.

2011-01-01

Tracking Environmental Costs and Investments in SAP will provide us with a managerial tool that will help us understand better the magnitude of the financial resources we are dedicating to environmental protection activities and investments. Environmental Cost Accounting is a new project in Slovenske Elektrarne that will be particularly valuable for the Company's environmental management initiatives, such as waste monitoring, cleaner production, eco-design and environmental management systems; its launch is expected in September. (author)

Cross-Cultural Investigation of Consumers’ Generations Attitudes Towards Purchase of Environmentally Friendly Products in Apparel Retail

OpenAIRE

Dabija Dan-Cristian; Chebeň Juraj; Lančarič Drahoslav

2017-01-01

Recent changes of the environment and in the society have altered consumers’ preferences and brought new concerns among local communities regarding environmental protection and organizations responsibility, the adoption of environmentally friendly strategies, as well as offering more sustainable products. Consumers tend to select retailers based on their focus on environmental friendly products and on various “green” strategies regarding waste disposal, package recycling, etc. This study aims...

Perceived quality, perceived risk and customer trust affecting customer loyalty of environmentally friendly electronics products

Directory of Open Access Journals (Sweden)

Lalinthorn Marakanon

2017-01-01

Full Text Available At present, industrial business competition causes producers to be aware of quality, price, and variety in developing new products to meet the consumers' needs. This research reviewed the literature on green marketing and proposes a new conceptual framework of customer loyalty. It uses four constructs—perceived quality, perceived risk, customer trust, and customer loyalty—in the context of environmentally friendly electronics products in Thailand. This research employed an empirical study using the questionnaire survey method to verify the hypotheses. Data were obtained from 420 consumers who bought and used environmentally friendly electronic products, particularly mobile phones, computers, and laptops using a purposive sampling method. The data were analyzed using confirmatory factor analysis (CFA and structural equation modeling (SEM. The results showed that perceived risk and customer trust had a direct effect on customer loyalty while perceived quality had an indirect effect on customer loyalty via customer trust. Furthermore, perceived quality had direct effects on perceived risk and customer trust. The results from the final SEM model were used to confirm the proposed relationships among the variables.

Corrosion-Activated Micro-Containers for Environmentally Friendly Corrosion Protective Coatings

Science.gov (United States)

Li, Wenyan; Buhrow, J. W.; Zhang, X.; Johnsey, M. N.; Pearman, B. P.; Jolley, S. T.; Calle, L. M.

2016-01-01

This work concerns the development of environmentally friendly encapsulation technology, specifically designed to incorporate corrosion indicators, inhibitors, and self-healing agents into a coating, in such a way that the delivery of the indicators and inhibitors is triggered by the corrosion process, and the delivery of self-healing agents is triggered by mechanical damage to the coating. Encapsulation of the active corrosion control ingredients allows the incorporation of desired autonomous corrosion control functions such as: early corrosion detection, hidden corrosion detection, corrosion inhibition, and self-healing of mechanical damage into a coating. The technology offers the versatility needed to include one or several corrosion control functions into the same coating.The development of the encapsulation technology has progressed from the initial proof-of-concept work, in which a corrosion indicator was encapsulated into an oil-core (hydrophobic) microcapsule and shown to be delivered autonomously, under simulated corrosion conditions, to a sophisticated portfolio of micro carriers (organic, inorganic, and hybrid) that can be used to deliver a wide range of active corrosion ingredients at a rate that can be adjusted to offer immediate as well as long-term corrosion control. The micro carriers have been incorporated into different coating formulas to test and optimize the autonomous corrosion detection, inhibition, and self-healing functions of the coatings. This paper provides an overview of progress made to date and highlights recent technical developments, such as improved corrosion detection sensitivity, inhibitor test results in various types of coatings, and highly effective self-healing coatings based on green chemistry. The NASA Kennedy Space Centers Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion

Cost-effectiveness of environmental management for vector control in resource development projects.

Science.gov (United States)

Bos, R

1991-01-01

Vector control methods are traditionally divided in chemical, biological and environmental management approaches, and this distinction also reflected in certain financial and economic aspects. This is particularly true for environmental modification, usually engineering or other structural works. It is highly capital intensive, as opposed to chemical and biological control which require recurrent expenditures, and discount rates are therefore a prominent consideration in deciding for one or the other approach. Environmental manipulation requires recurrent action, but can often be carried out with the community participation, which raises the issue of opportunity costs. The incorporation of environmental management in resource projects is generally impeded by economic considerations. The Internal Rate of Return continues to be a crucial criterion for funding agencies and development banks to support new projects; at the same time Governments of debt-riden countries in the Third World will do their best to avoid additional loans on such frills as environmental and health safeguards. Two approaches can be recommended to nevertheless ensure the incorporation of environmental management measures in resource projects in an affordable way. First, there are several examples of cases where environmental management measures either have a dual benefit (increasing both agricultural production and reducing vector-borne disease transmission) or can be implemented at zero costs. Second, the additional costs involved in structural modifications can be separated from the project development costs considered in the calculations of the Internal Rate of Return, and financial support can be sought from bilateral technical cooperation agencies particularly interested in environmental and health issues. There is a dearth of information in the cost-effectiveness of alternative vector control strategies in the developing country context. The process of integrating vector control in the

Environmentally friendly use of non-coal ashes in Sweden.

Science.gov (United States)

Ribbing, C

2007-01-01

The Swedish Thermal Engineering Research Institute (Värmeforsk) initiated an applied research program "Environmentally friendly use of non-coal ashes", in 2002. The program aims at increasing knowledge on the by-products of energy production and their application. The goal of formulating technical and environmental guidelines and assessments is a major point of the program, which is supported by about forty authorities and private organisations. The programme has been divided into four areas: recycling of ashes to forests, geotechnical applications, use in landfilling, and environmental aspects and chemistry. Among all results obtained, the following progress is shown: *Evidence for the positive effects of spreading ashes on forest growth. *A proposal for environmental guidelines on the utilisation of ashes in construction. *A handbook for using non-coal fly ashes in unpaved roads. *Technical and environmental assessments of MSWI bottom ashes in road construction. *Development of the use of ashes with municipal wastewater sludge as a cover for landfills and mine tailings. *Use of ashes from bio-fuels in concrete and replacement of cement in stoop mining. *A method to classify those by-products from combustion that have mirror entries in the EWC as a hazardous or non-hazardous compound. The Ash Programme has also made it possible to increase knowledge on ashes as valuable materials, on quality assurance and on markets for recovered materials.

Development of environmentally friendly messages to promote longer durations of breastfeeding for already breastfeeding mothers.

Science.gov (United States)

Hamilton, Amanda E

2015-01-01

Durations of breastfeeding activity in the United States fall short of established recommendations by leading public health institutions. In response to this problem, this study sought to develop environmentally friendly messages to promote continued breastfeeding for moms already breastfeeding in order to help them reach recommended breastfeeding durations. Messages were successfully cultivated to encourage moms already breastfeeding to meet recommended breastfeeding durations. In addition, this study cultivated strategies by which to use environmentally friendly messages to urge mothers who still need to decide whether to breastfeed or formula feed to breastfeed, although this was not the purpose of the research. Avenues for future communication-based breastfeeding research were also elucidated. The Elaboration Likelihood Model serves as useful theory to assess the role of environmentally friendly messages in the promotion of continued breastfeeding.

Production of environmentally friendly aerated concrete with required construction and operational properties

Directory of Open Access Journals (Sweden)

Tkach Evgeniya

2018-01-01

Full Text Available The purpose of these studies is to justify the feasibility of recycling different types of industrial waste instead of conventional expensive raw materials in production of environmentally friendly aerated concrete with required construction and operational properties. The impact of wastes from various industries on the environmental condition of affected areas, as well as the results of their environmental assessment were analyzed to determine whether these wastes could be used in production of high-performance building materials. The assessment of industrial wastes in aerated concrete production suggests that industrial wastes of hazard class IV can be recycled to produce aerated concrete. An environmentally friendly method for large-scale waste recycling, including a two-step environmentally sustainable mechanism, was developed. The basic quality indicators of the modified aerated concrete proved that the environmental safety could be enhanced by strengthening the structure, increasing its uniformity and improving thermal insulation properties. The modified non-autoclaved aerated concrete products with improved physical and operational properties were developed. They have the following properties: density – D700; class of concrete – B3.5; thermal transmittance coefficient – 0.143 W/(m·°C; frost resistance – F75.

The development of environmental assessment tools to support the creation of dementia friendly care environments: Innovative practice.

Science.gov (United States)

Waller, Sarah; Masterson, Abigail; Evans, Simon C

2017-02-01

The need for more dementia friendly design in hospitals and other care settings is now widely acknowledged. Working with 26 NHS Trusts in England as part of a Department of Health commissioned programme, The King's Fund developed a set of overarching design principles and an environmental assessment tool for hospital wards in 2012. Following requests from other sectors, additional tools were developed for hospitals, care homes, health centres and housing with care. The tools have proven to be effective in both disseminating the principles of dementia friendly design and in enabling the case to be made for improvements that have a positive effect on patient outcomes and staff morale. This paper reports on the development, use and review of the environmental assessment tools, including further work that is now being taken forward by The Association for Dementia Studies, University of Worcester.

Teaching Ecology to Children of Preschool Education to Instill Environmentally Friendly Behaviour

Science.gov (United States)

Ferreira, Maria Eduarda; Cruz, Catarina; Pitarma, Rui

2016-01-01

This qualitative study analyzes the results of a pedagogical and didactic experiment which was focused on the problem of teaching environmentally-friendly behaviours to young kindergarten children. It is essential to awaken children's curiosity and desire to know more about environmental issues in their regions so that children develop their own…

Dye sensitized solar cell based on environmental friendly eosin Y dye and Al doped titanium dioxide nano particles

Science.gov (United States)

Kulkarni, Swati S.; Bodkhe, Gajanan A.; Shirsat, Sumedh M.; Hussaini, S. S.; Shejwal, N. N.; Shirsat, Mahendra D.

2018-03-01

Present communication deals with the development of cost effective dye sensitized solar cell (DSSC) with eco-friendly materials. Eco-friendly Eosin Y dye was used to sensitize photo anode which was fabricated using undoped and Aluminium doped titanium dioxide (TiO2) nanoparticles. Undoped and Aluminium doped TiO2 nanoparticles were synthesized by simple and cost effective sol-gel method. Aluminium doped and undoped TiO2 nanoparticles were characterized using UV-visible, FT-IR spectroscopy, x-ray Diffraction, and Scanning Electron Micrograph with EDX. The photo-voltaic activity of the cell was studied under light irradiation of 100 milliwatt cm-2. Aluminium doped TiO2 nanoparticle photo electrode exhibits more than 60% increase in cell efficiency as compared to the undoped TiO2 nanoparticle photo electrode.

Pricing of environmental friendly herbicides appropriate for sustainable agriculture, A case study: wheat farmers in Khorasan Razavi province

Directory of Open Access Journals (Sweden)

Mohammad Ghorbani

2016-04-01

Full Text Available Awareness of wheat farmers’ personal preferences towards environmental issues and weed types is important in pricing bioherbicides for sustainable weed management and could consequently be a fundamental guide to agricultural authorities and policy-makers. In the present study, a survey was carried out by using data collected from 180 wheat farmers of Korasan Razavi province during 2008, together with hedonic pricing method. The role of environmental qualitative factors and weed type on pricing environmental-friendly herbicides on the basis of “willingness to pay” was studied. Results from the estimation of hedonic pricing method indicated that reduction of water pollution, human health risk, farmers information about negative effects of chemical herbicides and the virtual variable of weed type had significant effects on pricing environmental friendly herbicides. Variables of soil pollution and weed perenniality had no significant effects on pricing herbicide applicable to sustainable agricultural systems. Based on the results of this study, possibilities of using bioherbicide or less pollutant herbicides and also the rate of farmers willingness to pay for alternatives in the region are important factors recommended for additional studies

Release Properties and Electrochemical Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

Science.gov (United States)

Pearman, B. P.; Calle, L. M.; Zhang, X.; Li, W.; Buhrow, J. W.; Johnsey, M. N.; Montgomery, E. L.; Fitzpatrick, L.; Surma, J. M.

2015-01-01

The NASA Kennedy Space Center's Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion indicators, inhibitors and self-healing agents. This allows for the incorporation of autonomous corrosion control functionalities, such as corrosion detection and inhibition as well as the self-healing of mechanical damage, into coatings. This paper presents technical details on the characterization of inhibitor-containing particles and their corrosion inhibitive effects using electrochemical and mass loss methods. Three organic environmentally friendly corrosion inhibitors were encapsulated in organic microparticles that are compatible with desired coatings. The total inhibitor content and the release of one of the inhibitors from the microparticles in basic solution was measured. Particles with inhibitor contents of up 60 wt% were synthesized. Fast release, for immediate corrosion protection, as well as long-term release for continued protection, was observed. The inhibition efficacy of the inhibitors, both as the pure materials and in microparticles, on carbon steel was evaluated. Polarization curves and mass loss measurements showed that, in the case of 2MBT, its corrosion inhibition effectiveness was greater when it was delivered from microparticles.

Slip flow coefficient analysis in water hydraulics gear pump for environmental friendly application

International Nuclear Information System (INIS)

Yusof, A A; Wasbari, F; Zakaria, M S; Ibrahim, M Q

2013-01-01

Water hydraulics is the sustainable option in developing fluid power systems with environmental friendly approach. Therefore, an investigation on water-based external gear pump application is being conducted, as a low cost solution in the shifting effort of using water, instead of traditional oil hydraulics in fluid power application. As the gear pump is affected by fluid viscosity, an evaluation has been conducted on the slip flow coefficient, in order to understand to what extent the spur gear pump can be used with water-based hydraulic fluid. In this paper, the results of a simulated study of variable-speed fixed displacement gear pump are presented. The slip flow coefficient varies from rotational speed of 250 RPM to 3500 RPM, and provides volumetric efficiency ranges from 9 % to 97% accordingly

Application of Green Environmentally Friendly Materials in Food Packaging

Directory of Open Access Journals (Sweden)

Jixia Li

2017-11-01

Full Text Available With social development, requirements on the spiritual and material life have increased. However, some environmental issues appear, for example, in food packaging. Application of environment-friendly materials in food packaging has been more and more attractive. This study analyses the characteristics of degradable food packaging material and the existing problems, proposes the manufacturing of food packaging with poly(lactic acid/nanocrystalline cellulose composite material, tests its thermal and mechanical properties, and applies it to the design of food packaging. The results demonstrate that the thermal and mechanical properties of the material could satisfy the requirements of food packaging and that the material is applicable to the design of food packaging in the future. This work provides a reference for the application of green, environment-friendly materials in the design of food packaging.

Environmentally Friendly Cleaners for Removing Tar from Metal Surfaces

Science.gov (United States)

2009-04-01

treatment plants that handle phosphate type solu- tions. The terms used by commercial vendors such as environmentally friendly, all natural, green, and...solvents used in relation to diesel fuel, and the procedure can also rank solvents quantitatively. Sacco (2004) has studied the blending of two plant ...other bituminous materials from industrial equipment surfaces. The composition is a mixture of a carrier monocyclic monoterpene and a nonionic

Application of Green Environmentally Friendly Materials in Food Packaging

OpenAIRE

Jixia Li

2017-01-01

With social development, requirements on the spiritual and material life have increased. However, some environmental issues appear, for example, in food packaging. Application of environment-friendly materials in food packaging has been more and more attractive. This study analyses the characteristics of degradable food packaging material and the existing problems, proposes the manufacturing of food packaging with poly(lactic acid)/nanocrystalline cellulose composite material, tests its therm...

Environmentally friendly disinfectant: Production, disinfectant action and efficiency

Directory of Open Access Journals (Sweden)

Čekerevac Milan I.

2006-01-01

Full Text Available Silver is a known disinfectant from ancient times, and it has been widely used for various purposes: for food and water disinfection, curing of wounds and as a universal antibiotic for a wide spectrum of diseases - until the Second World War and the discovery of penicillin. Until recently, it was assumed that silver, being a heavy metal, was toxic for humans and living beings. However, the newest research provides facts that the usage of silver, even for drinking water disinfection, is benign if it is added in small concentrations (in parts per billion. It has been shown in the newer scientific and technical literature that silver in colloidal form is a powerful (secondary disinfectant for drinking water, that it can be effectively used for the disinfection of water containers including swimming pools, installations in food industry, medicine, etc. Particularly, it has been shown that colloidal silver combined with hydrogen peroxide shows synergism having strong bactericidal and antiviral effects. The combination can be successfully used as a disinfectant in agriculture, food production and medicine. The original electrochemical process of production, the mechanism of physical-chemical reactions in that process and the mechanism of the antiseptic affect of the environmentally friendly disinfectant, based on the synergism of colloidal silver and hydrogen peroxide and the activity of electrochemically activated water, is shown. The starting solution was anolyte, obtained in electrochemical activation by water electrolysis of a highly diluted solution of K-tartarate in demineralized water (5.5-1CT4 M. The problem of electrolysis of very dilute aqueous solutions in membrane cells was particularly treated. It was shown that the efficiency of the electrolysis depends on the competition between the two processes: the rates of the processes of hydrogen and oxygen generation at the electrodes and the process of diffusion of hydrogen and hydroxyl ions

Development and application of an environmentally friendly ductile alkali-activated composite

NARCIS (Netherlands)

Nedeljkovic, M.; Lukovic, M.; van Breugel, K.; Hordijk, D.A.; Ye, G.

2018-01-01

This paper presents a development of a ductile alkali-activated fly ash (FA) and ground granulated blast furnace slag (GBFS) based composite as an environmentally friendly material for structural concrete application. For this purpose, polyvinyl alcohol (PVA) fibres and sand aggregate were

Evaluation of Environmental Effects of Wave Energy Convertor Arrays

Science.gov (United States)

Jones, C. A.

2015-12-01

Stakeholders and regulators in the U.S. are generally uncertain as to the potential environmental impacts posed by deployments of marine and hydrokinetic (MHK) devices, and in particular wave energy conversion (WEC) devices, in coastal waters. The first pilot-scale WEC deployments in the U.S. have had to absorb unsustainable costs and delays associated with permitting to get devices in the water. As such, there is an urgent industry need to streamline the technical activities and processes used to assess potential environmental impacts. To enable regulators and stakeholders to become more comfortable and confident with developing effective MHK environmental assessments, a better understanding of the potential environmental effects induced by arrays of WEC devices is needed. A key challenge in developing this understanding is that the assessment of the WEC effects must come prior to deployment. A typical approach in similar environmental assessments is to use numerical models to simulate the WEC devices and array layouts so that the appropriate environmental stressors and receptors can be identified and assessed. Sandia National Laboratories (SNL) and the U.S. Department of Energy are fulfilling the industry-wide need to develop "WEC-friendly" open-source numerical modeling tools capable of assessing potential changes to the physical environment caused by the operation of WEC arrays. Studies using these tools will advance the nation's general knowledge of the interrelationships among the number, size, efficiency, and configuration of MHK arrays and the subsequent effects these relationships may have on the deployment environment. By better understanding these relationships, industry, stakeholders, and regulators will be able to work together to optimize WEC deployments such that environmental impacts are minimized while power output is maximized. The present work outlines the initial effort in coupling the SNL WEC-friendly tools with the environmental assessment

Environmental impact and cost analysis of coal versus nuclear power: The U.S. case

International Nuclear Information System (INIS)

Vujić, Jasmina; Antić, Dragoljub P.; Vukmirović, Zorka

2012-01-01

With all energy production systems there are environmental issues to be considered, risks to be assessed, and challenges to be addressed. It must be emphasized that an ideal energy source that is at the same time efficient, cost-effective, environment-friendly, and risk-free does not exist. There are always some necessary trade-offs to be made, in order to ensure optimal use of energy resources, while limiting environmental and health impacts. Nuclear energy is currently the only technology with a secure base-load electricity supply and no greenhouse gas emissions that has the potential to expand at a large scale. However, the spent fuel and safety issues must be addressed. Another base-load electricity source – the fossil-burning power plants – although affordable, emits various air pollutants (chemical and radioactive effluents, dust, ash, etc.), which are dispersed from a power source and transported through various pathways that could lead to the general population exposure. This paper summarizes current status and future trends in base-load electricity sources in the U.S., including environmental footprints, new regulatory requirements, and cost issues. It also presents an analysis of challenges that need to be overcome and opportunities that could us lead us closer to a sustainable energy future.

Eco-Friendly Superwetting Material for Highly Effective Separations of Oil/Water Mixtures and Oil-in-Water Emulsions.

Science.gov (United States)

Wang, Chih-Feng; Yang, Sheng-Yi; Kuo, Shiao-Wei

2017-02-20

Because the treatment of oily wastewater, generated from many industrial processes, has become an increasing environmental concern, the search continues for simple, inexpensive, eco-friendly, and readily scalable processes for fabricating novel materials capable of effective oil/water separation. In this study we prepared an eco-friendly superhydrophilic and underwater superoleophobic polyvinylpyrrolidone (PVP)-modified cotton that mediated extremely efficient separations of mixtures of oil/water and oil/corrosive solutions. This PVP-modified cotton exhibited excellent antifouling properties and could be used to separate oil/water mixtures continuously for up to 20 h. Moreover, the compressed PVP-modified cotton could separate both surfactant-free and -stabilized oil-in-water emulsions with fluxes of up to 23,500 L m -2 h -1 bar -1 -a level one to two orders of magnitude higher than that possible when using traditional ultrafiltration membranes having similar rejection properties. The high performance of our PVP-modified cotton and its green, low-energy, cost-effective preparation suggest its great potential for practical applications.

A simple cost-effective and eco-friendly wet chemical process for the fabrication of superhydrophobic cotton fabrics

International Nuclear Information System (INIS)

Richard, Edna; Lakshmi, R.V.; Aruna, S.T.; Basu, Bharathibai J.

2013-01-01

Superhydrophobic surfaces were created on hydrophilic cotton fabrics by a simple wet chemical process. The fabric was immersed in a colloidal suspension of zinc hydroxide followed by subsequent hydrophobization with stearic acid. The wettability of the modified cotton fabric sample was studied by water contact angle (WCA) and water shedding angle (WSA) measurements. The modified cotton fabrics exhibited superhydrophobicity with a WCA of 151° for 8 μL water droplet and a WSA of 5–10° for 40 μL water droplet. The superhydrophobic cotton sample was also characterized by field emission scanning electron microscopy (FESEM) and energy dispersive X-ray spectroscopy (EDX). The method is simple, eco-friendly and cost-effective and can be applied to large area of cotton fabric materials. It was shown that superhydrophobicity of the fabric was due to the combined effect of surface roughness imparted by zinc hydroxide and the low surface energy of stearic acid.

A simple cost-effective and eco-friendly wet chemical process for the fabrication of superhydrophobic cotton fabrics

Energy Technology Data Exchange (ETDEWEB)

Richard, Edna; Lakshmi, R.V.; Aruna, S.T., E-mail: aruna_reddy@nal.res.in; Basu, Bharathibai J.

2013-07-15

Superhydrophobic surfaces were created on hydrophilic cotton fabrics by a simple wet chemical process. The fabric was immersed in a colloidal suspension of zinc hydroxide followed by subsequent hydrophobization with stearic acid. The wettability of the modified cotton fabric sample was studied by water contact angle (WCA) and water shedding angle (WSA) measurements. The modified cotton fabrics exhibited superhydrophobicity with a WCA of 151° for 8 μL water droplet and a WSA of 5–10° for 40 μL water droplet. The superhydrophobic cotton sample was also characterized by field emission scanning electron microscopy (FESEM) and energy dispersive X-ray spectroscopy (EDX). The method is simple, eco-friendly and cost-effective and can be applied to large area of cotton fabric materials. It was shown that superhydrophobicity of the fabric was due to the combined effect of surface roughness imparted by zinc hydroxide and the low surface energy of stearic acid.

Gender sensitive education in watershed management to support environmental friendly city

Science.gov (United States)

Asteria, D.; Budidarmono; Herdiansyah, H.; Ni’mah, N. L.

2018-03-01

This study is about gender-sensitive perspective in watershed management education program as one of capacity building for citizens in watershed management with community-based strategy to support environmental friendly cities and security for women from flood disasters. Involving women and increasing women’s active participation in sustainable watershed management is essential in urban area. In global warming and climate change situations, city management should be integrated between social aspect and environmental planning. This study used mix method (concurrent embedded type, with quantitative as primary method) with research type is descriptive-explanatory. The result of this study is education strategies with gender approaches and affirmative action through emancipation approach and local knowledge from women’s experiences can increase women’s participation. Women’s empowerment efforts need integrated intervention and collaboration from government, NGO, and other stakeholders to optimize women’s role in watershed management for support environmental friendly city. The implication of this study is an educational strategy on watershed conservation with gender perspective to offer social engineering alternatives for decision makers to policy of sustainable watershed management in urban area related to flood mitigation efforts.

Environmental costs and benefits case study: nuclear power plant. Quantification and economic valuation of selected environmental impacts/effects. Final report

International Nuclear Information System (INIS)

1984-02-01

This case study is an application, to a nuclear power plant, of the methodology for quantifying environmental costs and benefits, contained in the regional energy plan, adopted in April, 1983, by the Northwest Power Planning Council, pursuant to Public Law 96-501.The study is based on plant number 2 of the Washington Public Power Supply System (WNP-2), currently nearing completion on the Hanford Nuclear Reservation in eastern Washington State. This report describes and documents efforts to quantify and estimate monetary values for the following seven areas of environmental effects: radiation/health effects, socioeconomic/infrastructure effects, consumptive use of water, psychological/health effects (fear/stress), waste management, nuclear power plant accidents, and decommissioning costs. 103 references

Development of environmentally friendly universal controller. Data and materials; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho. Shiryohen

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances, and data and materials on them were compiled into this volume. It covers the specifications (Versions 0.6 and 0.51) of a newly developed two-way controller protocol, the specification (Version 0.1) of two-way remote control IrDA-C communication unit hardware, an infrared communication protocol IrDa Control, and the like. It also accommodates information collected through surveys of technological trends as reflected in technical literature, Internet home pages, catalogs, and the like, concerning the user-friendliness of electrical home appliances, remote control, domestic consumption of electric power, and the like. Also covered is the result of surveys of patents involving environmentally friendly UC related technologies, namely, Japanese patents (from applications made in 1979 through disclosures made in 1998) and U.S. patents (registrations made in 1982 and thereafter). Furthermore, it contains the result of surveys of actualities of domestic use conducted for the purpose of clarifying the effect of environmentally friendly UC introduction, how such UCs are being accepted by the public, and the conditions that should be satisfied for their popularization. (NEDO)

Development of environmentally friendly universal controller. Data and materials; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho. Shiryohen

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances, and data and materials on them were compiled into this volume. It covers the specifications (Versions 0.6 and 0.51) of a newly developed two-way controller protocol, the specification (Version 0.1) of two-way remote control IrDA-C communication unit hardware, an infrared communication protocol IrDa Control, and the like. It also accommodates information collected through surveys of technological trends as reflected in technical literature, Internet home pages, catalogs, and the like, concerning the user-friendliness of electrical home appliances, remote control, domestic consumption of electric power, and the like. Also covered is the result of surveys of patents involving environmentally friendly UC related technologies, namely, Japanese patents (from applications made in 1979 through disclosures made in 1998) and U.S. patents (registrations made in 1982 and thereafter). Furthermore, it contains the result of surveys of actualities of domestic use conducted for the purpose of clarifying the effect of environmentally friendly UC introduction, how such UCs are being accepted by the public, and the conditions that should be satisfied for their popularization. (NEDO)

Pilot testing of environment-friendly low-emission alternative drive components for city buses. Phase 1. Technical final report

International Nuclear Information System (INIS)

Doemeland, H.; Haase, G.; Sarnes, J.; Schultheis, S.; Schuenemann, M.; Strauss, A.; Voss, K.; Aepler, E.; Stachel, K.; Wolter, M.; Lenz, W.

1993-05-01

The report describes pilot tests of environment-friendly, low-emission city buses with alternative drive systems. The following problems are discussed: Natural gas as primary energy source, natural gas drives, safety requirements, measurement and testing technology for natural gas engines, environmental effects, operating concepts, operating cost. (HW) [de

New environmentally-friendly antimicrobials and biocides from Andean and Mexican biodiversity.

Science.gov (United States)

Cespedes, Carlos L; Alarcon, Julio; Aqueveque, Pedro M; Lobo, Tatiana; Becerra, Julio; Balbontin, Cristian; Avila, Jose G; Kubo, Isao; Seigler, David S

2015-10-01

Persistent application of pesticides often leads to accumulation in the environment and to the development of resistance in various organisms. These chemicals frequently degrade slowly and have the potential to bio-accumulate across the food chain and in top predators. Cancer and neuronal damage at genomic and proteomic levels have been linked to exposure to pesticides in humans. These negative effects encourage search for new sources of biopesticides that are more "environmentally-friendly" to the environment and human health. Many plant or fungal compounds have significant biological activity associated with the presence of secondary metabolites. Plant biotechnology and new molecular methods offer ways to understand regulation and to improve production of secondary metabolites of interest. Naturally occurring crop protection chemicals offer new approaches for pest management by providing new sources of biologically active natural products with biodegradability, low mammalian toxicity and environmentally-friendly qualities. Latin America is one of the world's most biodiverse regions and provide a previously unsuspected reservoir of new and potentially useful molecules. Phytochemicals from a number of families of plants and fungi from the southern Andes and from Mexico have now been evaluated. Andean basidiomycetes are also a great source of scientifically new compounds that are interesting and potentially useful. Use of biopesticides is an important component of integrated pest management (IPM) and can improve the risks and benefits of production of many crops all over the world. Copyright © 2015 Elsevier Inc. All rights reserved.

An easy and environmentally-friendly approach to superamphiphobicity of aluminum surfaces

Energy Technology Data Exchange (ETDEWEB)

Deng, R. [School of Materials Science and Engineering, Yunnan University, Kunming 650091 (China); Hu, Y.M., E-mail: yongmaohu@163.com [College of Engineering, Dali University, Dali 671003 (China); Wang, L.; Li, Zh.H.; Shen, T. [Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Zhu, Y., E-mail: zhuyan@kmust.edu.cn [Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Xiang, J.Zh., E-mail: jzhxiang@ynu.edu.cn [School of Materials Science and Engineering, Yunnan University, Kunming 650091 (China)

2017-04-30

-corrosion, oil transportation, energy harvesting, microfluidics, and so forth. The approach reported in this paper may easily realize the industrial production of superamphiphobic Al surfaces owing to the advantage of facile, low cost and environmentally-friendly.

An easy and environmentally-friendly approach to superamphiphobicity of aluminum surfaces

International Nuclear Information System (INIS)

Deng, R.; Hu, Y.M.; Wang, L.; Li, Zh.H.; Shen, T.; Zhu, Y.; Xiang, J.Zh.

2017-01-01

transportation, energy harvesting, microfluidics, and so forth. The approach reported in this paper may easily realize the industrial production of superamphiphobic Al surfaces owing to the advantage of facile, low cost and environmentally-friendly.

A hybrid discrete choice model to assess the effect of awareness and attitude towards environmentally friendly travel modes

DEFF Research Database (Denmark)

Sottile, Eleonora; Meloni, Italo; Cherchi, Elisabetta

2015-01-01

The need to reduce private vehicle use has led to the development of soft measures aimed at re-educating car users through information processes that raise their awareness regarding the benefits of environmentally friendly modes, encouraging them to voluntarily change their mode choice behaviour......&R) instead of their car, we estimated a hybrid mode choice model....

Cross-Cultural Investigation of Consumers’ Generations Attitudes Towards Purchase of Environmentally Friendly Products in Apparel Retail

Directory of Open Access Journals (Sweden)

Dabija Dan-Cristian

2017-12-01

Full Text Available Recent changes of the environment and in the society have altered consumers’ preferences and brought new concerns among local communities regarding environmental protection and organizations responsibility, the adoption of environmentally friendly strategies, as well as offering more sustainable products. Consumers tend to select retailers based on their focus on environmental friendly products and on various “green” strategies regarding waste disposal, package recycling, etc. This study aims to highlight Romanian and Slovak consumers’ attitudes towards purchasing of goods from retailers that strive a clear focus on environmental responsibility and environmental friendly practices in apparel, footwear and sportswear retail. By means of a quantitative research based on a questionnaire administered to consumers of international retail chains with operations in both countries, the authors highlight differences in their perceptions and attitudes for buying green apparel, footwear and sportswear. Whereas Millennials and Gen Xers consumers in Romania and Slovakia believe that international apparel, footwear and sportswear retailers are less concerned about environmentally responsible behavior and the need of selling green products, Baby Boomers are more sensitive to such aspects and carefully select retailers according to their green strategy. This research provides specific findings about attitudes of different consumers’ generations within two emerging European countries (Romania, Slovakia.

Evaluation of caregiver-friendly workplace policy (CFWPs) interventions on the health of full-time caregiver employees (CEs): implementation and cost-benefit analysis

OpenAIRE

Williams, Allison M.; Tompa, Emile; Lero, Donna S.; Fast, Janet; Yazdani, Amin; Zeytinoglu, Isik U.

2017-01-01

Background Current Canadian evidence illustrating the health benefits and cost-effectiveness of caregiver-friendly workplace policies is needed if Canadian employers are to adopt and integrate caregiver-friendly workplace policies into their employment practices. The goal of this three-year, three study research project is to provide such evidence for the auto manufacturing and educational services sectors. The research questions being addressed are: What are the impacts for employers (econom...

Spillover of environment-friendly consumer behaviour

DEFF Research Database (Denmark)

Thøgersen, John; Ølander, Carl Folke

2003-01-01

This paper contributes empirical input to current reasoning about consumers' propensity to behave in an environmentally friendly way in different domains. Spe-cifically, we investigate whether environmentally friendly behaviours spread to more and more areas of the consumption pattern in a virtuous...... circle and whether it is a necessary prerequisite for a virtuous circle to emerge and to continue to work that the individual possesses certain general values or ethical norms. The data material is a three-wave panel study with a large random sample of Danish consumers. The data were analysed by means...... of structural equation modelling and other techniques. Cases of transfer of environment-friendly conduct between behavioural categories are found, but only in a few of the possible instances and only of a modest size. The panel analysis also identifies a few negative cross-lagged effects. Such effects may...

An environmentally friendly procedure to obtain flavonoids from Brazilian citrus waste

Energy Technology Data Exchange (ETDEWEB)

Bellete, Barbara S.; Ramin, Luize Z.; Porto, Deyvid; Ribeiro, Alany I.; Forim, Moacir R.; Zuin, Vânia G.; Fernandes, João B.; Silva, Maria Fátima G.F., E-mail: barbarabellete@gmail.com [Departamento de Química, Universidade Federal de São Carlos, SP (Brazil)

2018-05-01

Currently, most food waste is used as animal feed and this process does not take advantage of the available chemical composition. A Brazilian example is the citrus fruit processing wastes (CFPW), which have begun to draw attention due to their biological importance. In order to access the main compounds of this matrix, an efficient and environmentally friendly procedure was tested. From this extract, flavonoids as naringenin, hesperitin, chrysoeriol, sinensetin, 3,5,6,7,3',4'-hexamethoxyflavone, nobiletin, 5-methoxysalvigenin, 3,5,6,7,8,3',4'-heptamethoxyflavone, 3,5,6,7,4'-pentamethoxyflavone and isosakuranetin were identified by high performance liquid chromatography (HPLC-UV), liquid chromatography-mass spectrometry (LC-MS) and liquid chromatography-nuclear magnetic resonance (LC-NMR). This study describes the potential use of citrus waste as a source of biologically active compounds. The extraction method proposed for this work was not expensive and the flavonoids were obtained in large amounts, thus, this extraction method is being developed using pilot plant scale-up techniques and will soon be available to the industry at a low cost. (author)

An environmentally friendly procedure to obtain flavonoids from Brazilian citrus waste

International Nuclear Information System (INIS)

Bellete, Barbara S.; Ramin, Luize Z.; Porto, Deyvid; Ribeiro, Alany I.; Forim, Moacir R.; Zuin, Vânia G.; Fernandes, João B.; Silva, Maria Fátima G.F.

2018-01-01

Currently, most food waste is used as animal feed and this process does not take advantage of the available chemical composition. A Brazilian example is the citrus fruit processing wastes (CFPW), which have begun to draw attention due to their biological importance. In order to access the main compounds of this matrix, an efficient and environmentally friendly procedure was tested. From this extract, flavonoids as naringenin, hesperitin, chrysoeriol, sinensetin, 3,5,6,7,3',4'-hexamethoxyflavone, nobiletin, 5-methoxysalvigenin, 3,5,6,7,8,3',4'-heptamethoxyflavone, 3,5,6,7,4'-pentamethoxyflavone and isosakuranetin were identified by high performance liquid chromatography (HPLC-UV), liquid chromatography-mass spectrometry (LC-MS) and liquid chromatography-nuclear magnetic resonance (LC-NMR). This study describes the potential use of citrus waste as a source of biologically active compounds. The extraction method proposed for this work was not expensive and the flavonoids were obtained in large amounts, thus, this extraction method is being developed using pilot plant scale-up techniques and will soon be available to the industry at a low cost. (author)

Isomerization of glucose into fructose by environmentally friendly Fe/β zeolite catalysts.

Science.gov (United States)

Xu, Siquan; Zhang, Lei; Xiao, Kehao; Xia, Haian

2017-06-29

Herein, the environmentally friendly Fe/β zeolite for glucose isomerization to fructose in aqueous media was reported for the first time. The effects of various reaction conditions including reaction temperature, reaction time, catalyst dosage, etc. on the isomerization reaction over Fe/β zeolite were studied in detail. Under the optimized conditions, yield of fructose higher than 20% were obtained. Moreover, the Fe/β zeolite catalysts were stable and remained constant catalytic activity after five consecutive runs. The possible active Fe species for isomerization of glucose in Fe/β zeolite is also discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

An environmentally-friendly vacuum reduction metallurgical process to recover germanium from coal fly ash

Energy Technology Data Exchange (ETDEWEB)

Zhang, Lingen; Xu, Zhenming, E-mail: zmxu@sjtu.edu.cn

2016-07-15

Highlights: • An environmental friendly vacuum reduction metallurgical process is proposed. • Rare and valuable metal germanium from coal fly ash is recycled. • Residues are not a hazardous material and can be further recycled. • A germanium recovery ratio of 94.64% is obtained in pilot scale experiments. - Abstract: The demand for germanium in the field of semiconductor, electronics, and optical devices is growing rapidly; however, the resources of germanium are scarce worldwide. As a secondary material, coal fly ash could be further recycled to retrieve germanium. Up to now, the conventional processes to recover germanium have two problems as follows: on the one hand, it is difficult to be satisfactory for its economic and environmental effect; on the other hand, the recovery ratio of germanium is not all that could be desired. In this paper, an environmentally-friendly vacuum reduction metallurgical process (VRMP) was proposed to recover germanium from coal fly ash. The results of the laboratory scale experiments indicated that the appropriate parameters were 1173 K and 10 Pa with 10 wt% coke addition for 40 min, and recovery ratio germanium was 93.96%. On the basis of above condition, the pilot scale experiments were utilized to assess the actual effect of VRMP for recovery of germanium with parameter of 1473 K, 1–10 Pa and heating time 40 min, the recovery ratio of germanium reached 94.64%. This process considerably enhances germanium recovery, meanwhile, eliminates much of the water usage and residue secondary pollution compared with other conventional processes.

Improving environmental impact and cost assessment for supplier evaluation

Science.gov (United States)

Beucker, Severin; Lang, Claus

2004-02-01

Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

Trade off between costs and environmental effects of weed control on pavements

NARCIS (Netherlands)

Kempenaar, C.; Lotz, L.A.P.; Horst, van der C.L.M.; Beltman, W.H.J.; Leemans, K.J.M.; Bannink, A.D.

2007-01-01

An actor-participative project on sustainable weed control on pavements was started in 2000 in the Netherlands. The aim of the project was to develop a new concept of weed management that provides cost-effective and environmentally sound weed control. Early in 2002, practical guidelines were drawn

The determinants of household energy demand in rural Beijing: Can environmentally friendly technologies be effective?

International Nuclear Information System (INIS)

Zhang Jingchao; Kotani, Koji

2012-01-01

With the recent rapid economic growth, total energy demand in rural China has increased dramatically, and the energy structure is in the transition from non-commercial to commercial sources. Simultaneously, it is expected that households in rural areas will face energy shortages and additional environmental problems unless they have more access to renewable energy technologies. However, little is known about (i) the transition of energy use patterns and (ii) whether introduced technologies have been effective. To analyze these issues, we estimated the energy demands of rural households by using survey data taken from Beijing's ten suburban districts. The data contain information on both non-commercial and commercial energy use, key characteristics of the households and several renewable energy technologies. Our empirical analysis yielded three main results. First, the per capita income is a key factor in the per capita energy consumption. More specifically, the marginal increase (or marginal change) in per capita coal consumption strongly diminishes (or declines) as per capita income increases. Second, coal and liquefied petroleum gas (LPG) prices do not exhibit substitution effects, but an increase in these prices has strong negative effects on the use of these energy resources. Third, renewable energy technologies are identified to reduce coal consumption and to improve energy efficiency. Overall, these findings suggest a positive perspective: if the Chinese government were to design appropriate policies associated with renewable energy technologies and related energy prices, then coal consumption can be reduced in the near future, and the substitution to cleaner energy use will accelerate. Therefore, a smooth energy transition in rural China could be made in a more environmentally sustainable manner. - Highlights: ► Energy demands of non-commercial/commercial sources are examined in rural Beijing. ► Income and energy prices are key determinants of the energy

Environmental costs of meat production

DEFF Research Database (Denmark)

Nguyen, T Lan T; Hermansen, John Erik; Mogensen, Lisbeth

2012-01-01

This paper aims to address two questions: First, what is the real cost of meat to society if taking into account the environmental costs arising throughout the product life cycle; and second, whether and how the environmental costs related to meat production can be reduced. In addressing the issues...... to be the main contributor to the costs (55%), followed by global warming (21%) and respiratory inorganics (18%). A viable option combining improvement measures in three aspects: feed use, manure management, and manure utilization, reduces the environmental costs by a factor of 1.4. This results in an equal size......, we use pig meat production in the EU as a case study. The environmental costs of meat are displayed first as characterized results at different midpoint categories e.g. global warming, nature occupation, acidification, eutrophication, ecotoxicity, etc., and then aggregated into a single score using...

Cost-effectiveness evaluation of alternatives in environmental impact statements

International Nuclear Information System (INIS)

Weiser, A.L.

1977-01-01

Although it has been Federal government officials who have been accused in courts of law with mismanagement with regard to the consideration of alternatives in the environmental impact statement, the responsibility for systematically considering all alternatives to a proposed project remains with project decisionmakers in the Federal, state, or local levels of government and in industry. By applying the techniques of system cost-effectiveness analysis to the assessment of alternatives, it is believed that management will be able to clearly demonstrate that the selection of the proposed approach was neither arbitrary nor capricious. A rational approach to the assessment of alternatives should aid in meeting the mandates of environmental legislation and EIS guidelines, and it should eliminate the merit of any plaintiff's charge of mismanagement with regard to management's consideration of alternatives. Even though many interfaces between the proposed system and the environment cannot as yet be objectively quantified, application of CE techniques will demonstrate that a rigorous exploration and objective evaluation has been applied to the consideration of alternatives with respect to project objectives, financial conditions, and adverse environmental impacts

Eco-friendly polymer nanocomposites processing and properties

CERN Document Server

Thakur, Vijay Kumar

2015-01-01

This book contains precisely referenced chapters, emphasizing environment-friendly polymer nanocomposites with basic fundamentals, practicality and alternatives to traditional nanocomposites through detailed reviews of different environmental friendly materials procured from different resources, their synthesis and applications using alternative green approaches. The book aims at explaining basics of eco-friendly polymer nanocomposites from different natural resources and their chemistry along with practical applications which present a future direction in the biomedical, pharmaceutical and automotive industry. The book attempts to present emerging economic and environmentally friendly polymer nanocomposites that are free from side effects studied in the traditional nanocomposites. This book is the outcome of contributions by many experts in the field from different disciplines, with various backgrounds and expertises. This book will appeal to researchers as well as students from different disciplines. The co...

Environmentally friendly inhibition of pathogenic bacteria and algae propagation due phthalocyanine agents

International Nuclear Information System (INIS)

Rihova Ambrozova, J.; Bezdekova, E.; Louckova, E.; Nekovarova, J.

2007-01-01

From 2004, in the laboratory of The Institute of Chemical Technology in Prague is being solved the project FT-TA/034 'Environmentally friendly inhibition of pathogenic bacteria and algae propagation in the circulatory cooling systems of nuclear power stations and in other similar technological facilities' to determine effects of phthalocyanine agents. The project bearer is VUOS, Inc. in Rybitvi (Research Institute for Organic Synthesis Inc.), where are the new phthalocyanines synthesized. The aimed goal of the research is environmentally friendly liquidation of bacteria and algae by means of photodynamic generated singlet oxygen through impact of solar radiation in the circulation cooling waters of various technical and technological systems. The principle of the problem outlined is the applying of phthalocyanine agents on samples of pure bacterial, anabaenas and algae cultures to estimate the inhibition effect on the organism exposed. In the course of solution, it is assumed that in such way conducted inhibition of bacteria, anabaenas and algae as well of their proliferation would replace routinely used bactericidal and algicidal preparations, which demand permanent dosing into circulating waters or perhaps from time to time an application of shocking doses. The particular algicidal and bactericidal agents represents in this case in situ emerging singlet oxygen, that is harmless to water biocenoses and whose presence in the water is no reason to ban the outflow of waters treated in such a way into water streams. The goal should be also a direct estimation of the effect those agents on cooling waters samples e. g. from the nuclear power plant systems. The purpose of the tests performance is also elimination of filamentous green algae, emerging in the systems cooling towers. The applied preparations are not toxic and do not burden the living environment, they contain no substances interacting with surface materials of structures in the circulatory cooling circuit

Friend Effects and Racial Disparities in Academic Achievement

Directory of Open Access Journals (Sweden)

Jennifer Flashman

2014-07-01

Full Text Available Racial disparities in achievement are a persistent fact of the US educational system. An often cited but rarely directly studied explanation for these disparities is that adolescents from different racial and ethnic backgrounds are exposed to different peers and have different friends. In this article I identify the impact of friends on racial and ethnic achievement disparities. Using data from Add Health and an instrumental variable approach, I show that the achievement characteristics of youths’ friends drive friend effects; adolescents with friends with higher grades are more likely to increase their grades compared to those with lower-achieving friends. Although these effects do not differ across race/ethnicity, given differences in friendship patterns, if black and Latino adolescents had friends with the achievement characteristics of white students, the GPA gap would be 17 to 19 percent smaller. Although modest, this effect represents an important and often overlooked source of difference among black and Latino youth.

Analysis of Environmental Friendly Library Based on the Satisfaction and Service Quality: study at Library “X”

Science.gov (United States)

Herdiansyah, Herdis; Satriya Utama, Andre; Safruddin; Hidayat, Heri; Gema Zuliana Irawan, Angga; Immanuel Tjandra Muliawan, R.; Mutia Pratiwi, Diana

2017-10-01

One of the factor that influenced the development of science is the existence of the library, which in this case is the college libraries. Library, which is located in the college environment, aims to supply collections of literatures to support research activities as well as educational for students of the college. Conceptually, every library now starts to practice environmental principles. For example, “X” library as a central library claims to be an environmental friendly library for practicing environmental friendly management, but the X library has not inserted the satisfaction and service aspect to the users, including whether it is true that environmental friendly process is perceived by library users. Satisfaction can be seen from the comparison between expectations and reality of library users. This paper analyzes the level of library user satisfaction with library services in the campus area and the gap between expectations and reality felt by the library users. The result of the research shows that there is a disparity between the hope of library management, which is sustainable and environmentally friendly with the reality in the management of the library, so that it has not given satisfaction to the users yet. The gap value of satisfaction that has the biggest difference is in the library collection with the value of 1.57; while for the smallest gap value is in the same service to all students with a value of 0.67.

Aqueous hybrid ion batteries - An environmentally friendly alternative for stationary energy storage?

Science.gov (United States)

Peters, Jens F.; Weil, Marcel

2017-10-01

Aqueous hybrid ion batteries (AHIB) are being promoted as an environmentally friendly alternative to existing stationary battery technologies. However, no quantification of their potential environmental impacts has yet been done. This paper presents a prospective life cycle assessment of an AHIB module and compares its performance with lithium-ion and sodium-ion batteries in two different stationary energy storage applications. The findings show that the claim of being an environmentally friendly technology can only be supported with some major limitations. While the AHIB uses abundant and non-toxic materials, it has a very low energy density and requires increased amounts of material for providing a given storage capacity. Per kWh of battery, results comparable to those of the alternative lithium- or sodium-ion batteries are obtained, but significantly higher impacts under global warming and ozone depletion aspects. The comparable high cycle life of the AHIB compensates this partially, requiring less battery replacements over the lifetime of the application. On the other hand, its internal inefficiencies are higher, what becomes the dominating factor when charging majorly fossil based electricity, making AHIB unattractive for this type of applications.

Environmental cost of using poor decision metrics to prioritize environmental projects.

Science.gov (United States)

Pannell, David J; Gibson, Fiona L

2016-04-01

Conservation decision makers commonly use project-scoring metrics that are inconsistent with theory on optimal ranking of projects. As a result, there may often be a loss of environmental benefits. We estimated the magnitudes of these losses for various metrics that deviate from theory in ways that are common in practice. These metrics included cases where relevant variables were omitted from the benefits metric, project costs were omitted, and benefits were calculated using a faulty functional form. We estimated distributions of parameters from 129 environmental projects from Australia, New Zealand, and Italy for which detailed analyses had been completed previously. The cost of using poor prioritization metrics (in terms of lost environmental values) was often high--up to 80% in the scenarios we examined. The cost in percentage terms was greater when the budget was smaller. The most costly errors were omitting information about environmental values (up to 31% loss of environmental values), omitting project costs (up to 35% loss), omitting the effectiveness of management actions (up to 9% loss), and using a weighted-additive decision metric for variables that should be multiplied (up to 23% loss). The latter 3 are errors that occur commonly in real-world decision metrics, in combination often reducing potential benefits from conservation investments by 30-50%. Uncertainty about parameter values also reduced the benefits from investments in conservation projects but often not by as much as faulty prioritization metrics. © 2016 Society for Conservation Biology.

UK's climate change levy: cost effectiveness, competitiveness and environmental impacts

International Nuclear Information System (INIS)

Varma, Adarsh

2003-01-01

This paper intends to examine the cost effectiveness of UK's climate change levy (CCL), its implications on competitiveness of firms and the environmental impact. The paper briefly describes the levy and analyses it under the cannons of a good taxation policy. The economic implications of the levy are discussed with theoretical and empirical perspectives. Change in net exports, investment patterns and productivity and inclusion of compliance cost forms the basis for analysing the effect on competitiveness. It discusses the options available to firms to safeguard their competitiveness if it is adversely affected by the CCL. A description of the current scenario of the levy since its inception is also presented. The paper argues the need for a comprehensive policy involving the use of standards, emission trading as well as energy taxes to achieve emission and energy-use reductions. A focal point of this paper is to elucidate the pros and cons of the CCL (energy tax) with respect to an emission trading scheme

Environmentally Friendly Plasma-Treated PEDOT:PSS as Electrodes for ITO-Free Perovskite Solar Cells.

Science.gov (United States)

Vaagensmith, Bjorn; Reza, Khan Mamun; Hasan, Md Nazmul; Elbohy, Hytham; Adhikari, Nirmal; Dubey, Ashish; Kantack, Nick; Gaml, Eman; Qiao, Qiquan

2017-10-18

Solution processed poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) transparent electrodes (TEs) offer great potential as a low cost alternative to expensive indium tin oxide (ITO). However, strong acids are typically used for enhancing the conductivity of PEDOT:PSS TEs, which produce processing complexity and environmental issues. This work presents an environmentally friendly acid free approach to enhance the conductivity of PEDOT:PSS using a light oxygen plasma treatment, in addition to solvent blend additives and post treatments. The plasma treatment was found to significantly reduce the sheet resistance of PEDOT:PSS TEs from 85 to as low as 15 Ω sq -1 , which translates to the highest reported conductivity of 5012 S/cm for PEDOT:PSS TEs. The plasma treated PEDOT:PSS TE resulted in an ITO-free perovskite solar cell efficiency of 10.5%, which is the highest reported efficiency for ITO-free perovskite solar cells with a PEDOT:PSS electrode that excludes the use of acid treatments. This research presents the first demonstration of this technology. Moreover, the PEDOT:PSS TEs enabled better charge extraction from the perovskite solar cells and reduced hysteresis in the current density-voltage (J-V) curves.

Use of natural gas, methanol, and ethanol fuel emulsions as environmentally friendly energy carriers for mobile heat power plants

Science.gov (United States)

Likhanov, V. A.; Lopatin, O. P.

2017-12-01

The need for using environmentally friendly energy carriers for mobile heat power plants (HPPs) is grounded. Ecologically friendly sources of energy, such as natural gas as well as renewable methyl and ethyl alcohols, are investigated. In order to develop, determine, and optimize the composition of environmentally friendly energy carriers for an HPP, the latter has been tested when working on diesel fuel (DF), compressed natural gas (CNG), and methanol and ethanol fuel emulsions (MFE, EFE). It has been experimentally established that, for the application of environmentally friendly energy carriers for a 4Ch 11.0/12.5 diesel engine of a mobile fuel and power plant, it is necessary to maintain the following ratio of components when working on CNG: 80% gas and 20% DF primer portion. When working on an alcohol mixture, emulsions of the following composition were used: 25% alcohol (methanol or ethanol), 0.5% detergent-dispersant additive succinimide C-5A, 7% water, and 67.5% DF. When this diesel passed from oil DF to environmentally friendly energy sources, it allowed for the reduction of the content of exhaust gases (EG) (1) when working on CNG with recirculation of exhaust gases (EGR) (recirculation was used to eliminate the increased amount of nitric oxides by using CNG): carbon black by 5.8 times, carbon dioxide by 45.9%, and carbon monoxide by 23.8%; (2) when working on MFE: carbon black by 6.4 times, nitrogen oxides by 29.6%, carbon dioxide by 10.1%, and carbon oxide by 47.6%; (3) when working on EFE: carbon black by 4.8 times; nitrogen oxides by 40.3%, carbon dioxide by 26.6%, and carbon monoxide by 28.6%. The prospects of use of environmentally friendly energy carriers in diesels of mobile HPPs, such as natural gas, ethanol, and methanol, has been determined.

Environmental cost/benefit analysis for fusion power plants

International Nuclear Information System (INIS)

Young, J.R.

1976-11-01

This document presents a cost/benefit analysis of use of fusion power plants early in the 21st century. The first section describes the general formulation of the analysis. Included are the selection of the alternatives to the fusion reactor, selection of the power system cases to be compared, and a general comparison of the environmental effects of the selected alternatives. The second section compares the cumulative environmental effects from 2010 to 2040 for the primary cases of the power system with and without fusion reactors. The third section briefly illustrates the potential economic benefits if fusion reactors produce electricity at a lower unit cost than LMFBRs can. The fourth section summarizes the cost/benefit analysis

Climate-friendly Default Rules

DEFF Research Database (Denmark)

Sunstein, Cass R.; Reisch, Lucia A.

. The underlying reasons include the power of suggestion; inertia and procrastination; and loss aversion. If well-chosen, climate-friendly defaults are likely to have large effects in reducing the economic and environmental harms associated with various products and activities. In deciding whether to establish...

Clean and Selective Catalytic C-H alkylation of Alkenes with Environmental friendly Alcohols

KAUST Repository

Poater, Albert; Vummaleti, Sai V. C.; Polo, Alfonso; Cavallo, Luigi

2016-01-01

Bearing the alkylation of alkene substrates using alcohol as solvent, catalysed by the cationic Ru-based catalyst [(C6H6)(PCy3)(CO)RuH]+, DFT calculations have been carried out to get mechanistic insights of such an environmental friendly reaction

Swedish Upper Secondary School Students’ Conceptions of Negative Environmental Impact and Pricing

Directory of Open Access Journals (Sweden)

Cecilia Lundholm

2013-03-01

Full Text Available This study explores relationships between upper secondary school students’ understanding of prices and environmental impacts. The study uses responses from 110 students to problems in which they were asked to explain differences in prices and also to express and justify opinions on what should be the difference in prices. Very few students expressed an environmental dimension in their understanding of price. A few students suggested that environmental impact influenced price by raising demand for “Environmentally friendly products”. A few students suggested that ‘environmentally friendly products’ had higher prices because they were more costly to produce. We found no examples of students combining both lines of explanation. However, nearly half of the students believed that prices should reflect environmental effects, and this reasoning was divided between cases where the point was justified by a broad environmental motivation and cases where the point was justified in relation to incentives–to get consumers to act in a more environmentally friendly way.

Cost-benefit analysis for design of environmentally conscious manufacturing

International Nuclear Information System (INIS)

Matysiak, L.M.

1993-01-01

In recent years, much attention has been focused on reducing the environmental impacts of products and manufacturing processes. Concerned about rising compliance costs and stringent regulatory requirements, companies are carefully evaluating the environmental impacts of their products. In response, designers, engineers, and managers are beginning to use life-cycle analysis, design for environment techniques, and environmentally conscious manufacturing (ECM) as tools to help them to not only do what is best for the environment, but also to do what is best for their company. These tools are also a useful aid in evaluating the trade-offs that may exist between different product and process alternatives. However, how does one choose the optimal solution from these various product and process alternatives? Cost versus benefit analysis is an effective tool that can be used to evaluate various manufacturing alternatives and to choose a solution that is both cost effective and environmentally compatible. Many companies are beginning to use cost benefit analyses as a means to justify product or process modifications that result in a benefit to the environment

Department of defense environmental cleanup cost allowability policy. Master`s thesis

Energy Technology Data Exchange (ETDEWEB)

Murdock, J.M.

1994-12-01

The purpose of this thesis was to investigate the factors affecting the allowability determination of defense contractor environmental remediation costs. The primary objective of this thesis was to determine what policies and contracting cost principles the Department of Defense (DOD) should develop to address environmental costs in a consistent manner, providing a `single face` to industry. A secondary objective was to develop an audit framework and questions to allow for consistent policy analysis and application to a contractor`s proposed environmental remediation costs based upon the materiality of the situation. Background material was presented to show the amount and complexity of environmental regulations, the effects of current judicial decisions and DOD`s efforts to develop a consistent policy. Research material was provided from Congress, the General Accounting Office, DOD, defense contractors, California, Washington, industry associations and environmental protection coalitions. The researcher`s analysis of the material produced an environmental cost principle. This cost principle was applied to a current environmental claim, producing an audit framework and tailored list of cost and/or pricing data analysis, questions. Both the cost principle and audit framework are recommended for incorporation into DOD`s final environmental cost allowability decision.

Melon oil methyl ester: an environmentally friendly fuel

Directory of Open Access Journals (Sweden)

S.K. Fasogbon

2015-06-01

Full Text Available Demand for energy is growing across the globe due to the direct relationship between the well-being and prosperity of people and energy usage. However, meeting this growing energy demand in a safe and environmentally friendly manner is a key challenge. To this end, methyl esters (biodiesels have been and are being widely investigated as alternatives to fossil fuels in compression ignition engines. In this study, melon (Colocynthis Citrullus Lanatus oil was used to synthesize biodiesel (methyl ester using the transesterification method in the presence of a sodium hydroxide promoter. The emissions profile of the biodiesel was investigated by setting up a single-cylinder four-stroke air-cooled CI engine connected to a TD115-hydraulic dynamometer and an Eclipse Flue Gas Analyzer (FGA with model number EGA4 flue gas analyzer. The engine was run at engine speeds of 675, 1200 and 1900rpm for biodiesel/diesel blends at 21°C on a volume basis of 0/100(B0, 10/90(B10, 20/80(B20, 30/70(B30, 40/60(B40 and 50/50(B50. The test showed a downward trend in the emissions profile of the biodiesel, with remarkable reductions of about 55% in the dangerous-carbon monoxide exhaust gas pollutant and 33.3% in the unfriendly SOX from 100% diesel to B30-biodiesel concentration. Increasing the speed from 675 to 1200 and then to 1900 rpm also afforded further reductions in CO and SOX exhaust emissions. NOX however increased marginally by 2.1% from the same 100% diesel to the B30-biodiesel composition. Based on the remarkable reduction in CO and SOX and the marginal increase in NOX as the concentration of the biodiesel increased in the blends, the study concludes that melon oil methyl ester is an environmentally friendly fuel.

Environment polluting conventional chemical control compared to an environmentally friendly IPM approach for control of diamondback moth, Plutella xylostella (L.), in China: a review.

Science.gov (United States)

Shakeel, Muhammad; Farooq, Muhammad; Nasim, Wajid; Akram, Waseem; Khan, Fawad Zafar Ahmad; Jaleel, Waqar; Zhu, Xun; Yin, Haichen; Li, Shuzhong; Fahad, Shah; Hussain, Saddam; Chauhan, Bhagirath Singh; Jin, Fengliang

2017-06-01

The diamondback moth, Plutella xylostella, is recognized as a widely distributed destructive insect pest of Brassica worldwide. The management of this pest is a serious issue, and an estimated annual cost of its management has reached approximately US$4 billion. Despite the fact that chemicals are a serious threat to the environment, lots of chemicals are applied for controlling various insect pests especially P. xylostella. An overreliance on chemical control has not only led to the evolution of resistance to insecticides and to a reduction of natural enemies but also has polluted various components of water, air, and soil ecosystem. In the present scenario, there is a need to implement an environmentally friendly integrated pest management (IPM) approach with new management tactics (microbial control, biological control, cultural control, mating disruption, insecticide rotation strategies, and plant resistance) for an alternative to chemical control. The IPM approach is not only economically beneficial but also reduces the environmental and health risks. The present review synthesizes published information on the insecticide resistance against P. xylostella and emphasizes on adopting an alternative environmentally friendly IPM approach for controlling P. xylostella in China.

Aging in Context: Individual and Environmental Pathways to Aging-Friendly Communities-The 2015 Matthew A. Pollack Award Lecture.

Science.gov (United States)

Scharlach, Andrew E

2017-08-01

Reflecting the theme of the 2015 Gerontological Society of America (GSA) Annual Scientific Meeting, "Aging as a Lifelong Process," this paper examines intersections between aging processes and their environmental context, develops theory regarding constructive developmental processes and their environmental context, and considers potential implications for conceptualizing and creating aging-friendly communities. The first section examines the primary goals of aging-friendly communities, that is, promoting elder well-being. The second section explores the role of environmental pathways in fostering well-being throughout the lifecourse. The third section presents a new Process Model of Constructive Aging that identifies key developmental processes at the intersection of individual and environmental pathways. The final section considers potential implications for creating aging-friendly communities, including ways in which cities and towns can promote the ability of community members to live fully throughout their lives, and identifies some key conceptual and empirical challenges affecting the future of the field. © The Author 2017. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

STARCH SULFURIC ACID: AN ALTERNATIVE, ECO-FRIENDLY CATALYST FOR BIGINELLI REACTION

Directory of Open Access Journals (Sweden)

Ramin Rezaei

2013-12-01

Full Text Available The one-pot multicomponent synthesis of 3,4-dihydropyrimidinone derivatives using starch sulfuric acid as an environmentally friendly biopolymer-based solid acid catalyst from aldehydes, β-keto esters and urea/ thiourea without solvent is described. Compared with classical Biginelli reaction conditions, this new method has the advantage of minimizing the cost operational hazards and environmental pollution, good yields, shorter reaction times and simple work-up.

Helping people build a better world? Barriers to more environmentally friendly energy production in China: the case of Shell

Energy Technology Data Exchange (ETDEWEB)

Buan, Inga Fritzen

2008-03-15

China's rapid industrialization and economic expansion are causing massive environmental damage, with consequences beyond the country's borders, especially due to the use of fossil fuels' effect on climate change. Shell China can contribute to making energy production, if not clean and sustainable, then cleaner and more sustainable by making existing energy production more environmentally friendly; by diversifying and developing alternative energy sources; and by creating precedence influencing others to follow in its footsteps. The first goal of this report is to identify and analyze changes that have happened in the Shell Group since the 1990s when energy companies started their 'greening' processes. These changed happened due to stricter environmental legislation, increased civil society pressure and media scrutiny. Changes on the global and headquarters level in a company do not, however, necessitate similar developments in its national and local level operations. The second goal is thus to analyze to which degree the changes in the Shell Group have had relevance for Shell China and whether barriers in the Chinese context influence its prospects to operate in a more environmentally friendly way. (author). 64 refs

An environmentally friendly and cost effective technique for the commercial cultivation of oyster mushroom [Pleurotus florida (Mont.) Singer].

Science.gov (United States)

Panjikkaran, Seeja Thomachan; Mathew, Deepu

2013-03-15

The existing protocol for the cultivation of oyster mushroom (Pleurotus florida) in polyethylene bags leads to environmental pollution amounting to 18 g of polyethylene per 450 g of mushroom, which is the average biological efficiency achieved from a bag. Thus the projected annual global pollution amounts to 2 million tones, corresponding to the production of 48 million tones. Experiments were conducted at Kerala Agricultural University, India, to formulate an oyster mushroom cultivation strategy that reduces this pollution level. Pooled results of experiments at the institute's and farmers' units have shown that reusable plastic buckets having perforations of 1.5 cm × 1.0 cm throughout the side walls could be used to substitute polyethylene bags, while following the standard cultivation protocols. Cultivation in perforated buckets has recorded a biological efficiency of 435.69 ± 56.75 g in 47.07 ± 5.22 days against 459.11 ± 53.52 g in 38.05 ± 4.54 days in polyethylene bags. The rate of contamination in buckets was significantly lower than that in bags: 9.28 ± 2.12 and 12.60 ± 3.73% respectively. Reusable plastic buckets with perforations on the side walls could be used to substitute the conventional polyethylene bags in oyster mushroom cultivation, with no significant difference in yield. Losses due to slight increase in crop duration in buckets will be compensated with a lower rate of contamination. For a unit having a daily output of 100 kg, it was estimated that during 10 years of permanent cultivation following this technique, the cost of cultivation could be reduced to one-tenth and the environmental pollution reduced by at least 730 000 non-degradable polyethylene bags. © 2012 Society of Chemical Industry.

An Environmentally-Friendly Tourist Village in Egypt Based on a Hybrid Renewable Energy System––Part One: What Is the Optimum City?

Directory of Open Access Journals (Sweden)

Fahd Diab

2015-07-01

Full Text Available The main objective of this work is to select the optimum city from five touristic Egyptian cities (Luxor, Giza, Alexandria, Qena and Aswan to establish an environmentally-friendly tourist village. The selection of the city, according to the economic cost (cost of energy (COE, net present cost (NPC and the amount of greenhouse gases (GHG emitted, is carried out with respect to four cases, based on the effects of ambient temperature and applying GHG emission penalties. According to the simulation results, using the well-known Homer software, Alexandria is the economic city for hybrid photovoltaics (PV/wind/diesel/battery and wind/diesel/battery systems, while Aswan is the most economic city for a hybrid PV/diesel/battery system. However, for a diesel/battery system there is no significant economic difference between the cities in the study. On the other hand, according to the amount of GHG emitted from a hybrid PV/wind/diesel/battery system, Qena is the optimum city if the effects of ambient temperature are considered. However, if the GHG emission penalties are applied, Aswan will be the optimum city. Furthermore, Alexandria is the optimum city if the effects of ambient temperature are considered and the GHG emission penalties are applied. Additionally, the effects of ambient temperature and applying GHG emission penalties are studied on hybrid PV/diesel/battery, wind/diesel/battery and diesel/battery systems in this study.

The Environmental Issues Relating to Packaging in the UK Food Sector

OpenAIRE

Jiang, Bo

2007-01-01

This dissertation's objective is to explore a practical and cost-effective way to alleviate the environmental burden coming from food and food packaging industries, to establish a win-win solution between the call for environmental-friendly packaging and the producers' actual cost. To achieve this aim, the author implemented both primary and secondary research methods, and has recorded her findings according to these two kinds of researches in Chapter 4. Combining the findings with her acad...

Cost And Environmental Optimization Of Waste Supply Chains Using Clca

DEFF Research Database (Denmark)

Sacchi, Romain; Wæhrens, Brian Vejrum; Prosman, Ernst Johannes

2016-01-01

Although circular supply chains are widely perceived as a huge leap towards a more environmentally friendly economy, supply chain literature lacks environmental supplier selection criteria (E-SSC) for circular supply chains. Taking into account the various characteristics of circular supply chains...

Effects of benzotriazole on anodized film formed on AZ31B magnesium alloy in environmental-friendly electrolyte

International Nuclear Information System (INIS)

Guo Xinghua; An Maozhong; Yang Peixia; Li Haixian; Su Caina

2009-01-01

An environmental-friendly electrolyte of silicate and borate, which contained an addition agent of 1H-benzotriazole (BTA) with low toxicity (LD50 of 965 mg/kg), was used to prepare an anodized film on AZ31B magnesium alloy under the constant current density of 1.5 A/dm 2 at room temperature. Effects of BTA on the properties of the anodized film were studied by scanning electron microscopy (SEM), energy dispersion spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), loss weight measurement, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS), respectively. The results demonstrated that anodized growth process, surface morphology, thickness, phase structure and corrosion resistance of the anodized film were strongly dependant on the BTA concentration, which might be attributed to the formation of an BTA adsorption layer on magnesium substrate surface. When the BTA concentration was 5 g/L in the electrolyte, a compact and thick anodized film could provide excellent corrosion resistance for AZ31B magnesium alloy.

Geothermal and Trigeneration Systems as Innovative and EnvironmentallyFriendly Solutions for Telecommunication Plant Cooling

Directory of Open Access Journals (Sweden)

Paolo Trotta

2016-12-01

Full Text Available The paper deals with a model-based analysis of innovative cooling systems, to be deployed in telecommunication (TLC plants in consideration of their size, geographical location and typology (e.g. central Offices or data-centers. Environmentally friendly systems, such as geothermal heat pumps and trigeneration plants, were considered. The trade-off between the investment and operating costs was first analyzed, followed by a comparative evaluation of economic savings achievable via each candidate solution with respect to reference benchmarks, here represented by traditional air-water heat pump and conventional interaction with electrical grid. In this way, a preliminary macroscopic assessment of the best solutions was accomplished, according to the different scenarios (i.e. small or big TLC plant under investigation. A more detailed analysis, concerning the comparison between traditional and geothermal systems, was specifically carried out to evaluate savings as a function of the external temperature and, consequently, of geographical location.

Replacement of petroleum based hydraulic fluids with renewable and environmental friendly resource

International Nuclear Information System (INIS)

Wan Sani Wan Nik; Noraini Ali

2000-01-01

Rational self-interest and good environmental citizenship are forcing the development of renewable and environmentally acceptable hydraulic fluids. Fluids that are at least equivalent in performance plus biodegradable have been formulated in Europe and USA using vegetable oils as base stocks for innovative additive packages. While many of the differences in using vegetable based stocks in place of mineral oils have been adapted to by straightforward formulating changes, the oxidation stability of vegetable-based stock is still a challenging area. This work initiates the investigation in Malaysia in the use of environmentally friendly resource to replace partially the petroleum based hydraulic fluid. The study concentrates more in improving the oxidation stability of the vegetable based stocks. (Author)

The effect of alternative cost and environmental impact minimisation strategies on radioactive waste disposal strategies

International Nuclear Information System (INIS)

Laundy, R.S.; James, A.R.; Groom, M.S.; Dalrymple, G.J.

1985-06-01

The study reported here investigates the effects of different cost and environmental impact minimisation strategies for a single waste disposal scenario. Four disposal options are considered. The study examines the environmental impacts from waste storage and transport and the disposal impacts in terms of collective dose, maximum individual dose and individual dose from intrusion. The total cost of disposing of waste takes account of storage, transport and disposal costs to each of the four facilities. Two minimum cost scenarios and seven minimum impact assessments were performed. The results showed clearly that a trade-off has to be made between the environmental impacts from transport and storage of waste. A low objective risk of transport is achieved by directing waste to the engineered trench, assumed to have a central location. This waste is stored until the facility is available in 1995 thus increasing the potential impact from storage. The results also show a trade-off has to be made between minimising the maximum individual dose from disposal and collective dose. The study shows that for relatively little cost large reductions in the impacts can be obtained particularly in short and long-term collective dose and the individual dose from intrusion. (author)

Environmental cost of distribution transformer losses

International Nuclear Information System (INIS)

Georgilakis, Pavlos S.

2011-01-01

Improvements in energy efficiency of electrical equipment reduce the greenhouse gas (GHG) emissions and contribute to the protection of the environment. Moreover, as system investment and energy costs continue to increase, electric utilities are increasingly interested in installing energy-efficient transformers at their distribution networks. This paper analyzes the impact of the environmental cost of transformer losses on the economic evaluation of distribution transformers. This environmental cost is coming form the cost to buy GHG emission credits because of the GHG emissions associated with supplying transformer losses throughout the transformer lifetime. Application results on the Hellenic power system for 21 transformer offers under 9 different scenarios indicate that the environmental cost of transformer losses can reach on average 34% and 8% of transformer purchasing price for high loss and medium loss transformers, respectively. That is why it is important to incorporate the environmental cost of transformer losses into the economic evaluation of distribution transformers.

Sectoral Costs of Environmental Policy. Final Report

International Nuclear Information System (INIS)

Vercaemst, P.; Vanassche, S.; Campling, P.; Vranken, L.; Agnolucci, P.; Salmons, R.; Shaw, B.; Jantzen, J.; Van der Woerd, H.; Gruenig, M.; Best, A.

2007-12-01

The Directorate General for Environment of the European Commission has launched a study on the 'Sectoral costs of environmental policy'. The overall aim of the study is to obtain a clearer picture of the impact of environmental policy in some of the industrial sectors most affected by environmental policy, taking into account the differences between sectors and Member States. Previous studies mainly focussed on the individual impact of one Directive, but in this study we will assess the cumulative costs attributable to the environmental policy in its entirety and attempt to identify synergies between individual policies. The project has the following main objectives: paint a clearer picture of the environmental costs for the selected industries; indicate the differences in costs between individual companies; indicate the differences in costs between Member States; demonstrate the drivers for environmental expenditures of the companies and differences between sectors and Member States; describe different types of environmental regulation (policy instruments) and their impact on environmental expenditures; evaluate the environmental performance of the industries and differences between companies/Member States; collect evidence for the impacts of environmental regulation (and associated costs) on the competitiveness of companies; and carry out an international comparison. The sectors selected are:oil supply chain; electricity production; steel industry; and textile and leather industry

Environmental costs of fossil fuel energy production

International Nuclear Information System (INIS)

Riva, A.; Trebeschi, C.

1997-01-01

The costs of environmental impacts caused by fossil fuel energy production are external to the energy economy and normally they are not reflected in energy prices. To determine the environmental costs associated with an energy source a detailed analysis of all environmental impacts of the complete energy cycle is required. The economic evaluation of environmental damages is presented caused by atmospheric emissions produced by fossil fuel combustion for different uses. Considering the emission factors of sulphur oxides, nitrogen oxides, dust and carbon dioxide and the economic evaluation of their environmental damages reported in literature, a range of environmental costs associated with different fossil fuels and technologies is presented. A comparison of environmental costs resulting from atmospheric emissions produced by fossil-fuel combustion for energy production shows that natural gas has a significantly higher environmental value than other fossil fuels. (R.P.)

The Effects of Mothers' Educational Levels on University Students' Environmental Protection Commitments and Environmental Behaviors

Science.gov (United States)

Saraçli, Sinan; Yilmaz, Veysel; Arslan, Talha

2014-01-01

Problem Statement: The damage caused by recent environmental problems has led to increased environmental concerns and the development of environment-friendly consumption behaviours in almost every society. Environment-friendly consumption involves the consideration of environmental benefits by minimizing any damage done to the environment at all…

Introduction of Microbial Biopolymers in Soil Treatment for Future Environmentally-Friendly and Sustainable Geotechnical Engineering

Directory of Open Access Journals (Sweden)

Ilhan Chang

2016-03-01

Full Text Available Soil treatment and improvement is commonly performed in the field of geotechnical engineering. Methods and materials to achieve this such as soil stabilization and mixing with cementitious binders have been utilized in engineered soil applications since the beginning of human civilization. Demand for environment-friendly and sustainable alternatives is currently rising. Since cement, the most commonly applied and effective soil treatment material, is responsible for heavy greenhouse gas emissions, alternatives such as geosynthetics, chemical polymers, geopolymers, microbial induction, and biopolymers are being actively studied. This study provides an overall review of the recent applications of biopolymers in geotechnical engineering. Biopolymers are microbially induced polymers that are high-tensile, innocuous, and eco-friendly. Soil–biopolymer interactions and related soil strengthening mechanisms are discussed in the context of recent experimental and microscopic studies. In addition, the economic feasibility of biopolymer implementation in the field is analyzed in comparison to ordinary cement, from environmental perspectives. Findings from this study demonstrate that biopolymers have strong potential to replace cement as a soil treatment material within the context of environment-friendly construction and development. Moreover, continuing research is suggested to ensure performance in terms of practical implementation, reliability, and durability of in situ biopolymer applications for geotechnical engineering purposes.

Evaluation of environmentally friendly products for control of fungal diseases of grapes

OpenAIRE

Schilder, A.M.C.; Gillett, J.M.; Sysak, R.W.; Wise, J.C.

2002-01-01

Various environmentally friendly products were tested for efficacy in controlling powdery mildew, downy mildew, black rot, Phomopsis, and Botrytis bunch rot in grapes over several years. The products tested were: JMS stylet oil (paraffinic oil), Serenade (Bacillus subtilis), Croplife (citrus and coconut extract) + Plant food (foliar fertilizer), Armicarb (potassium bicarbonate), Elexa (chitosan), Milsana (giant knotweed extract), and AQ10 (Ampelomyces quisqua/is). JMS Stylet Oil, Armicarb, Se...

Environmental friendly method for the extraction of coir fibre and isolation of nanofibre.

Science.gov (United States)

Abraham, Eldho; Deepa, B; Pothen, L A; Cintil, J; Thomas, S; John, M J; Anandjiwala, R; Narine, S S

2013-02-15

The objective of this work was to develop an environmental friendly method for the effective utilization of coir fibre by adopting steam pre-treatment. The retting of the coconut bunch makes strong environmental problems which can be avoided by this method. Chemical characterization of the fibre during each processing stages confirmed the increase of cellulose content from raw (40%) to final steam treated fibres (93%). Morphological and dynamic light scattering analyses of the fibres at different processing stages revealed that the isolation of cellulose nano fibres occur in the final step of the process as an aqueous suspension. FT-IR and XRD analysis demonstrated that the treatments lead to the gradual removal of lignin and hemicelluloses from the fibres. The existence of strong lignin-cellulose complex in the raw coir fibre is proved by its enhanced thermal stability. Steam explosion has been proved to be a green method to expand the application areas of coir fibre. Copyright © 2012 Elsevier Ltd. All rights reserved.

Feasibility survey of the environmentally-friendly coal utilization system. Feasibility survey of the environmentally-friendly coal utilization system in the Philippines; Kankyo chowagata sekitan riyo system kanosei chosa. Philippines ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

With relation to the coal of the Philippines, where the expansion of the use of coal as a substitute for petroleum/plant fuel is aimed at, the paper grasped the situation of coal production/development, the trend of coal import and domestic distribution, the coal utilization trend, and environmental problems, and analyzed the situation of coal utilization/spread by industry including the commercial/residential use. The purpose of the survey is to draw up a master plan for the introduction of the environmentally-friendly coal utilization system. As to the use of environmentally-friendly coal technology which should be adopted to the coal mining industry and commercial/residential sector, cited are the introduction of coal preparation technology and power transmission technology, and the development/spread of briquette as a firewood substituting fuel. In the electric power sector, the problem is the treatment of ash after combustion and the effective use. Relating to the treatment of flue gas, there is no installation at all of desulfurization facilities and denitrification facilities. In the cement industry sector, they wish to return fuel from heavy oil to coal. For it, it is necessary to study dust preventive measures. In the other sectors, coal hasn`t been used very much. An increase in coal demand is not expected also in the future, and big problems concerning coal haven`t occurred. 42 figs., 64 tabs.

Cost Estimating Handbook for Environmental Restoration

International Nuclear Information System (INIS)

1993-01-01

Environmental restoration (ER) projects have presented the DOE and cost estimators with a number of properties that are not comparable to the normal estimating climate within DOE. These properties include: An entirely new set of specialized expressions and terminology. A higher than normal exposure to cost and schedule risk, as compared to most other DOE projects, due to changing regulations, public involvement, resource shortages, and scope of work. A higher than normal percentage of indirect costs to the total estimated cost due primarily to record keeping, special training, liability, and indemnification. More than one estimate for a project, particularly in the assessment phase, in order to provide input into the evaluation of alternatives for the cleanup action. While some aspects of existing guidance for cost estimators will be applicable to environmental restoration projects, some components of the present guidelines will have to be modified to reflect the unique elements of these projects. The purpose of this Handbook is to assist cost estimators in the preparation of environmental restoration estimates for Environmental Restoration and Waste Management (EM) projects undertaken by DOE. The DOE has, in recent years, seen a significant increase in the number, size, and frequency of environmental restoration projects that must be costed by the various DOE offices. The coming years will show the EM program to be the largest non-weapons program undertaken by DOE. These projects create new and unique estimating requirements since historical cost and estimating precedents are meager at best. It is anticipated that this Handbook will enhance the quality of cost data within DOE in several ways by providing: The basis for accurate, consistent, and traceable baselines. Sound methodologies, guidelines, and estimating formats. Sources of cost data/databases and estimating tools and techniques available at DOE cost professionals

Ukrainian realities of labeling of environmentally friendly products

Directory of Open Access Journals (Sweden)

I.M. Tsaruk

2016-12-01

Full Text Available The basis of life of any society is a safe environment that is not only the guarantee of welfare and quality of life, but also the guarantee of the further development of human civilization. That is why in the modern world the issue of the preservation of the natural environment is of special actuality. The gradual awareness by humanity of new threats (high degree of concentration of harmful industries; high level of resource and energy consumption; lack of modern environmental technologies; slow but inevitable degradation of the gene pool of a population due to the consumption of poor quality and in most cases harmful products, etc. forced the society to seek new approaches to socio-economic development and environmental management. One of such approaches is the introduction of ecological and organic labeling. Marking is a source of information about the purity, safety and quality of the products offered in the market; effective information mechanism, which is a kind of quality mark for the offered products. The current practice of ecological and organic labeling aimed at the increase of level consumer's awareness and the changing models of purchasing behavior in the direction of environmental protection. The feature of most marking systems of environmentally friendly and safe products is the obligation of compliance with the established requirements used by producers of raw materials and technologies taking into account their potential environmental impact. Labeling of ecologically clean and safe products is reducing the negative impact on the environment and on the human's health. It is the consequence of changes in the economic environment, namely: the improvement of socio-ethical requirements to production; the increasing level of integration of producers and service providers; the customer's satisfaction in varieties of products; globalization of economic space; reduction of time for development, standardization and production. Labeling is

Low-cost fused taper polymer optical fiber (LFT-POF) splitters for environmental and home-networking solution

Science.gov (United States)

Supian, L. S.; Ab-Rahman, Mohammad Syuhaimi; Harun, Mohd Hazwan; Gunab, Hadi; Sulaiman, Malik; Naim, Nani Fadzlina

2017-08-01

In visible optical communication over the multimode PMMA fibers, the overall cost of optical network can be reduced by deploying economical splitters for distributing the optical data signals from a point to multipoint in transmission network. The low-cost splitters shall have two main characteristics; good uniformity and high power efficiency. The most cost-effective and environmental friendly optical splitter having those characteristics have been developed. The device material is 100% purely based on the multimode step-index PMMA Polymer Optical Fiber (POF). The region which all fibers merged as single fiber is called as fused-taper POF. This ensures that all fibers are melted and fused properly. The results for uniformity and power efficiency of all splitters have been revealed by injecting red LED transmitter with 650 nm wavelength into input port while each end of output fibers measured by optical power meter. Final analysis shows our fused-taper splitter has low excess loss 0.53 dB and each of the output port has low insertion loss, which the average value is below 7 dB. In addition, the splitter has good uniformity that is 32:37:31% in which it is suitably used for demultiplexer fabrication.

Development of a method for environmentally friendly chemical peptide synthesis in water using water-dispersible amino acid nanoparticles

Directory of Open Access Journals (Sweden)

Fukumori Yoshinobu

2011-08-01

Full Text Available Abstract Due to the vast importance of peptides in biological processes, there is an escalating need for synthetic peptides to be used in a wide variety of applications. However, the consumption of organic solvent is extremely large in chemical peptide syntheses because of the multiple condensation steps in organic solvents. That is, the current synthesis method is not environmentally friendly. From the viewpoint of green sustainable chemistry, we focused on developing an organic solvent-free synthetic method using water, an environmentally friendly solvent. Here we described in-water synthesis technology using water-dispersible protected amino acids.

Advanced, Environmentally Friendly Hydroelectric Turbines for the Restoration of Fish and Water Quality

International Nuclear Information System (INIS)

Brookshier, P.A.; Cada, G.F.; Flynn, J.V.; Rinehart, B.N.; Sale, M.J.; Sommers, G.L.

1999-01-01

Hydroelectric power contributes about 10 percent of the electrical energy generated in the United States, and nearly 20 percent of the worlds electrical energy. The contribution of hydroelectric generation has declined in recent years, often as a consequence of environmental concerns centering around (1) restriction of upstream and downstream fish passage by the dam, and (2) alteration of water quality and river flows by the impoundment. The Advanced Hydropower Turbine System (AHTS) Program of the U.S. Department of Energy is developing turbine technology which would help to maximize global hydropower resources while minimizing adverse environmental effects. Major technical goals for the Program are (1) the reduction of mortality among turbine-passed fish to 2 percent or less, compared to current levels ranging up to 30 percent or greater; and (2) development of aerating turbines that would ensure that water discharged from reservoirs has a dissolved oxygen concentration of at least 6 mg/L. These advanced, environmentally friendly turbines would be suitable both for new hydropower installations and for retrofitting at existing dams. Several new turbine designs that have been he AHTS program are described

Modeling a farm population to estimate on-farm compliance costs and environmental effects of a grassland extensification scheme at the regional scale

DEFF Research Database (Denmark)

Uthes, Sandra; Sattler, Claudia; Piorr, Annette

2010-01-01

We used a farm-level modeling approach to estimate on-farm compliance costs and environmental effects of a grassland extensification scheme in the district of Ostprignitz-Ruppin, Germany. The behavior of the regional farm population (n = 585) consisting of different farm types with different...... and environmental effects were heterogeneous in space and farm types as a result of different agricultural production and site characteristics. On-farm costs ranged from zero up to almost 1500 Euro/ha. Such high costs occurred only in a very small part of the regional area, whereas the majority of the grassland had...... low on-farm costs below 50 Euro/ha. Environmental effects were moderate and greater on high-yield than on low-yield grassland. The low effectiveness combined with low on-farm costs in large parts of the region indicates that the scheme is not well targeted. The soft scheme design results from...

Standardized Cost Structure for the Environmental Industry

International Nuclear Information System (INIS)

Skokan, B.; Melamed, D.; Guevara, K.; Mallick, P.; Bierman, G.; Marshall, H.E.

2006-01-01

The underlying key to developing successful estimates, tracking project costs, and utilizing historical project cost information is the development of standardized and well-defined hierarchical listing of cost categories. Committees within the U.S. Federal agencies have pioneered efforts toward developing the Environmental Cost Element Structure (ECES), which is key in achieving these goals. The ECES was developed using an iterative process with input from federal agencies and industry. Experts from several disciplines participated including engineers, cost estimators, project/program managers, and contract personnel. The ECES benefits from an intense analytical effort, the knowledge gained from the maturation of the environmental industry, and incorporation of past user's experiences. Building upon this foundation, the E06 committee of the ASTM International has now fully developed and published a standard (ASTM 2150-04) that provides standardized cost categories with complete cost category definitions. This standard affords environmental and nuclear D and D project managers the opportunity to have a well defined hierarchical listing of their estimates and actual costs, readily adapted to performing summations and roll-ups, supported by a multi-level dictionary specifically defining the content of the cost elements as well as the summations. Owing to the dynamic nature of the environmental technologies, efforts need to be made to continue to update this standard by adding new technologies and methods as they are developed and employed in the field. Lastly, the Environmental Cost Element Structure that is embodied in this standard also presents opportunities to develop historical cost databases and comprehensive life cycle cost estimates and standardized cost estimating tools. (authors)

Consumer purchase intention towards environmentally friendly vehicles: an empirical investigation in Kuala Lumpur, Malaysia.

Science.gov (United States)

Afroz, Rafia; Masud, Muhammad Mehedi; Akhtar, Rulia; Islam, Md Ashraful; Duasa, Jarita Bt

2015-10-01

This paper examines whether attitudes towards electric vehicles (ATEVs), subjective norms (SNs) and perceived behavioural control (PBC) have significant associations with consumer purchase intention (PI) and the purchase behaviour of environmentally friendly vehicles (EFVs). The results from the survey questionnaires are analysed using confirmatory factor analysis (CFA) and structural equation modelling (SEM). The findings of this paper indicate that ATEV, SN and PBC significantly influence PI. This finding also indicates that environmental consequence and individual preferences do not influence the PI of the respondents. We found that Malaysian car owners are largely unaware of the greenhouse effects on the environment or attach to it little importance, which is reflected in their PI towards EFVs. The outcomes of this study could help policymakers design programmes to influence attitudes, subjective norms, perceived behavioural control and purchase behaviour to prevent further air pollution and reduce CO2 emissions from the transportation sector.

Dispersion of pollutants, environmental externalities due to a pulverized coal power plant and their effect on the cost of electricity

International Nuclear Information System (INIS)

Czarnowska, Lucyna; Frangopoulos, Christos A.

2012-01-01

Energy conversion systems generate pollution that causes damages to the environment and the society. The objective of this work is to study the dispersion of pollutants and assess the environmental and social cost due to pollution from such a system. For this purpose, a pulverized coal power plant is selected. Using thermodynamic principles combined with empirical techniques, the quantities of pollutants emitted by the plant are estimated. Then, using the EcoSenseWeb software, which is based on the results of the ExternE project, the external environmental cost (externalities) of pollution is assessed. The plant is considered as located in four different cities in Poland and the externalities are calculated for each city separately. It is shown that the external environmental cost has a strong influence on the unit cost of electricity. In addition, the dispersion of pollutants is presented for the plant located in Olsztyn city. Furthermore, the plant is considered as located near the capitals of European countries and the environmental externalities are calculated for each city. The neighboring countries that are strongly affected by the plant in each particular city are identified. The sensitivity of the unit cost of electricity to certain important parameters is investigated. -- Highlights: ► The external cost of pollution has a significant impact on the cost of electricity. ► The results depend on the particular plant, location and level (local-global). ► Externalities make the installation of abatement equipment economical. ► The source location of emissions has a significant effect on the external cost. ► The transboundary pollution has a strong effect on the environmental cost.

Removing environmental organic pollutants with bioremediation and phytoremediation.

Science.gov (United States)

Kang, Jun Won

2014-06-01

Hazardous organic pollutants represent a threat to human, animal, and environmental health. If left unmanaged, these pollutants could cause concern. Many researchers have stepped up efforts to find more sustainable and cost-effective alternatives to using hazardous chemicals and treatments to remove existing harmful pollutants. Environmental biotechnology, such as bioremediation and phytoremediation, is a promising field that utilizes natural resources including microbes and plants to eliminate toxic organic contaminants. This technology offers an attractive alternative to other conventional remediation processes because of its relatively low cost and environmentally-friendly method. This review discusses current biological technologies for the removal of organic contaminants, including chlorinated hydrocarbons, focusing on their limitation and recent efforts to correct the drawbacks.

The energy policy turnaround in Germany. With safe, costs affordable and environmentally-friendly energy by the year 2050. Special edition; Die Energiewende in Deutschland. Mit sicherer, bezahlbarer und umweltschonender Energie ins Jahr 2050. Sonderheft

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-02-15

Within the contribution under consideration, the Federal Ministry of Economics and Technology (Berlin, Federal Republic of Germany) reports on the energy policy turnaround in Germany under special consideration of safe, costs affordable and environmentally-friendly energy by the year 2050. This contribution consists of the following chapters: (1) The Federal Government starts a new chapter in the energy policy; (2) The transformation of the energy markets should be cost-efficient as possible; (3) The grid extension is the fundament for a further extension of renewable energies; (4) New gas and coal power plants also are necessary in the future for maintaining the security of supply; (5) The renewable energy moved a step closer to the market; (6) Capital investments in new energy technologies are worthwhile; (7) Increased energy efficiency is a central requirement for the transformation of the energy supply; (8) We need Europe as a partner for the transformation of the energy supply in Germany; (9) A good foreign energy policy is a guarantor for a safe energy supply.

Implicit environmental costs in hydroelectric development

International Nuclear Information System (INIS)

Carlsen, A.J.; Wenstoep, F.; Strand, J.

1992-01-01

The ranking of hydropower projects under the Norwegian Master Plan for Water Resources is used to derive implicit government preferences for a number of environmental attributes described by ordinal scores for each project. Higher negative scores are generally associated with greater implicit willingness to pay to avoid the environmental damage tied to the attribute, caused by hydropower development. The total (ordinary economic and implicit environmental) cost for each project are derived, and the environmental costs per capacity unit are found to be on the same order as the economic costs, lower for projects ranked for early exploitation, and higher for projects to be saved permanently. An implicit long-run marginal cost curve for Norwegian hydropower development is derived, which is generally upward sloping, but not uniformly so. This can be due to the model specification problems or ranking inconsistencies, both of which are likely to be present. 11 refs., 7 figs., 1 tab

Environmental control costs for oil shale processes

Energy Technology Data Exchange (ETDEWEB)

None

1979-10-01

The studies reported herein are intended to provide more certainty regarding estimates of the costs of controlling environmental residuals from oil shale technologies being readied for commercial application. The need for this study was evident from earlier work conducted by the Office of Environment for the Department of Energy Oil Shale Commercialization Planning, Environmental Readiness Assessment in mid-1978. At that time there was little reliable information on the costs for controlling residuals and for safe handling of wastes from oil shale processes. The uncertainties in estimating costs of complying with yet-to-be-defined environmental standards and regulations for oil shale facilities are a critical element that will affect the decision on proceeding with shale oil production. Until the regulatory requirements are fully clarified and processes and controls are investigated and tested in units of larger size, it will not be possible to provide definitive answers to the cost question. Thus, the objective of this work was to establish ranges of possible control costs per barrel of shale oil produced, reflecting various regulatory, technical, and financing assumptions. Two separate reports make up the bulk of this document. One report, prepared by the Denver Research Institute, is a relatively rigorous engineering treatment of the subject, based on regulatory assumptions and technical judgements as to best available control technologies and practices. The other report examines the incremental cost effect of more conservative technical and financing alternatives. An overview section is included that synthesizes the products of the separate studies and addresses two variations to the assumptions.

Rehabilitation of Problem Soils Through Environmental Friendly Technologies-I: Effect of Sabins and Farmyard Manure

International Nuclear Information System (INIS)

Baig, Mirza B.; Ziaeldin, Mohammad S.; Mahler, Robert L.

2004-01-01

Environmental problem due to land degradation in the developing countries have been a matter of great cocern for the decades. The rehabilitation of problem land has been through many chemical means and engineering approaches, that have resulted in enhancing the gravity and the magnitude of problems. The present studies were undertaken to examine the role of environmental friendly practices to address the salinity issue. the effect of organic manuring (green manure and farmyard manure) or rice was investigated in a field study on a saline-sodic soil of the Saline Agriculture Research Station, Sadhuke, Pakistan. Sesbania was grown as a green manuring crop for two months and then incorporated into soil. farmyard manure (FYM) was applied at the rate of 0, 5, 10 and 20/ha before the sowing of Sesbania. Rice,Cv. Basmati 385 was used as the indicator/test crop. Results revealed that both paddy and straw yields were significantly improved by the application of sesbina and FYM. Green manure with sesbina improved the paddy and straw yields by 15.4% and 14.5% respectively. Productive tillers were also increased by the application of FYM but difference were not significant between 10 and 20ha/ of FYM application. FYM application also improved the paddy and straw yield significantly. The incrase in paddy yield due to application of 5, 10 and 20/ha of FYM were 6.8%, 24.4% and 37.6% over control, respectively. Nitrogen and phosphprus utilizationn by rice were also significantly improved with the application of green manure. Nitrogen uptake by rice was incresed by 17.8% and that of phosphorus by 21.9% with the green manuring. Nitrogen uptake was significantlty increased by the application of different rates of FYM. Also phosphorus uptake was increased significantly with the application of FYM. (author)

Environmentally based Cost-Benefit Analysis

International Nuclear Information System (INIS)

Magnell, M.

1993-11-01

The fundamentals of the basic elements of a new comprehensive economic assessment, MILA, developed in Sweden with inspiration from the Total Cost Assessment-model are presented. The core of the MILA approach is an expanded cost and benefit inventory. But MILA also includes a complementary addition of an internal waste stream analysis, a tool for evaluation of environmental conflicts in monetary terms, an extended time horizon and direct allocation of costs and revenues to products and processes. However, MILA does not ensure profitability for environmentally sound projects. Essentially, MILA is an approach of refining investment and profitability analysis of a project, investment or product. 109 refs., 38 figs

The Cost-Effectiveness and Return-On-Investment of a Combined Social and Physical Environmental Intervention in Office Employees

Science.gov (United States)

van Dongen, J. M.; Coffeng, J. K.; van Wier, M. F.; Boot, C. R. L.; Hendriksen, I. J. M.; van Mechelen, W.; Bongers, P. M.; van der Beek, A. J.; Bosmans, J. E.; van Tulder, M. W.

2017-01-01

This study explored the cost-effectiveness and return-on-investment of a combined social and physical environmental worksite health promotion program compared with usual practice, and of both intervention conditions separately. Participants were randomized to the combined intervention (n = 92), social environmental intervention (n = 118), physical…

UK's climate change levy: cost effectiveness, competitiveness and environmental impacts

Energy Technology Data Exchange (ETDEWEB)

Varma, Adarsh [Hull Univ., School of Economic Studies, Hull (United Kingdom)

2003-01-01

This paper intends to examine the cost effectiveness of UK's climate change levy (CCL), its implications on competitiveness of firms and the environmental impact. The paper briefly describes the levy and analyses it under the canons of a good taxation policy. The economic implications of the levy are discussed with theoretical and empirical perspectives. Change in net exports, investment patterns and productivity and inclusion of compliance cost forms the basis for analysing the effect on competitiveness. It discusses the options available to firms to safeguard their competitiveness if it is adversely affected by the CCL. A description of the current scenario of the levy since its inception is also presented. The paper argues the need for a comprehensive policy involving the use of standards, emission trading as well as energy taxes to achieve emission and energy-use reductions. A focal point of this paper is to elucidate the pros and cons of the CCL (energy tax) with respect to an emission trading scheme. (Author)

75 FR 26270 - Environmental Planning and Historic Preservation Compliance Costs Policy; Environmental Planning...

Science.gov (United States)

2010-05-11

...] Environmental Planning and Historic Preservation Compliance Costs Policy; Environmental Planning and Historic... draft Environmental Planning and Historic Preservation Compliance Costs policy and a draft Environmental Planning and Historic Preservation Mitigation policy. DATES: Comments must be received by June 10, 2010...

Graphene oxide-loaded shortening as an environmentally friendly heat transfer fluid with high thermal conductivity

Directory of Open Access Journals (Sweden)

Vongsetskul Thammasit

2017-01-01

Full Text Available Graphene oxide-loaded shortening (GOS, an environmentally friendly heat transfer fluid with high thermal conductivity, was successfully prepared by mixing graphene oxide (GO with a shortening. Scanning electron microscopy revealed that GO particles, prepared by the modified Hummer’s method, dispersed well in the shortening. In addition, the latent heat of GOS decreased while their viscosity and thermal conductivity increased with increasing the amount of loaded GO. The thermal conductivity of the GOS with 4% GO was higher than that of pure shortening of ca. three times, from 0.1751 to 0.6022 W/mK, and increased with increasing temperature. The GOS started to be degraded at ca. 360°C. After being heated and cooled at 100°C for 100 cycles, its viscosity slightly decreased and no chemical degradation was observed. Therefore, the prepared GOS is potentially used as environmentally friendly heat transfer fluid at high temperature.

Achievement report for fiscal 1998. Development of environmentally friendly universal controller; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances. An environmentally friendly UC is a remote controller which utilizes an infrared two-way communication function and becomes capable of dealing with any appliance upon downloading remote control information from the appliance involved. Studies were conducted for the development of controller hardware and software therefor and for the development of electrical home appliances to correspond to their specifications. In relation with energy conservation, studies centered about reduction in power consumption while on standby and unnecessary power consumption. As the result, an environmentally friendly UC protocol was newly developed and, based on the protocol, plural numbers of controllers, appliances, and network gateways were tentatively fabricated, and were examined for their function, behavior, and operational interchangeability. Systems aiming at reducing power consumption while on standby and unnecessary power consumption were built by way of experiment, and were checked for performance. It was then concluded that a reduction of several billion kWh might be achieved. (NEDO)

Environmentally friendly health care food services: a survey of beliefs, behaviours, and attitudes.

Science.gov (United States)

Wilson, Elisa D; Garcia, Alicia C

2011-01-01

There is increasing global interest in sustainability and the environment. A hospital/health care food service facility consumes large amounts of resources; therefore, efficiencies in operation can address sustainability. Beliefs, attitudes, and behaviours about environmentally friendly practices in hospital/health care food services were explored in this study. Questionnaires addressed environmentally friendly initiatives in building and equipment, waste management, food, and non-food procurement issues. The 68 participants included hospital food service managers, clinical dietitians, dietary aides, food technicians, and senior management. Data analysis included correlation analysis and descriptive statistics. Average scores for beliefs were high in building and equipment (90%), waste management (94%), and non-food procurement (87%), and lower in food-related initiatives (61%) such as buying locally, buying organic foods, buying sustainable fish products, and reducing animal proteins. Average positive scores for behaviours were positively correlated with beliefs (waste management, p=0.001; food, p=0.000; non-food procurement, p=0.002). Average positive scores for attitude in terms of implementing the initiatives in health care were 74% for building and equipment, 81% for waste management, 70% for non-food procurement, and 36% for food. The difference in food-related beliefs, behaviours, and attitudes suggests the need for education on environmental impacts of food choices. Research is recommended to determine facilitators and barriers to the implementation of green strategies in health care. As food experts, dietitians can lead changes in education, practice, and policy development.

Preparation, characterization and antibacterial effects of eco-friendly ...

African Journals Online (AJOL)

Purpose: To synthesize and characterize eco-friendly gold nanorods (Au-NRs) and to assess their effects against two bacterial strains. Methods: Synthesis of eco-friendly gold nanorods was done from an aqueous solution of chloroauric acid and cetyltrimethylammonium bromide by mixing Olea europaea fruit and Acacia ...

Eco-friendly Energy Storage System: Seawater and Ionic Liquid Electrolyte.

Science.gov (United States)

Kim, Jae-Kwang; Mueller, Franziska; Kim, Hyojin; Jeong, Sangsik; Park, Jeong-Sun; Passerini, Stefano; Kim, Youngsik

2016-01-08

As existing battery technologies struggle to meet the requirements for widespread use in the field of large-scale energy storage, novel concepts are urgently needed concerning batteries that have high energy densities, low costs, and high levels of safety. Here, a novel eco-friendly energy storage system (ESS) using seawater and an ionic liquid is proposed for the first time; this represents an intermediate system between a battery and a fuel cell, and is accordingly referred to as a hybrid rechargeable cell. Compared to conventional organic electrolytes, the ionic liquid electrolyte significantly enhances the cycle performance of the seawater hybrid rechargeable system, acting as a very stable interface layer between the Sn-C (Na storage) anode and the NASICON (Na3 Zr2 Si2 PO12) ceramic solid electrolyte, making this system extremely promising for cost-efficient and environmentally friendly large-scale energy storage. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Eco-friendly Development Of Industry

International Nuclear Information System (INIS)

An, Gi Cheol; Park, Hun; Lee, Dong Jin; Ryu, Sang Hui

1998-02-01

This book reports eco-friendly development of industry, which has summary on bring up the issue and research way and system of research. It deals with current state of affairs on eco-friendly development of industry and the case of developed countries such as necessity and meaning of eco-friendly development industry, prospect and change of the tendency, environmental issue by field in Korea like the steel industry, nonferrous metal industry, auto industry, and cement industry and general policy for eco-friendly development of industry.

Study of the environmental costs to nuclear power plants using the SIMPACTS program

Energy Technology Data Exchange (ETDEWEB)

Menzel, Francine; Sabundjian, Gaiane; Mutarelli, Rita de Cassia, E-mail: fmenzel@ipen.b, E-mail: gdjian@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

The nuclear energy presents advantages in comparison with other kinds of energy sources, when their externalities are evaluated. Externality is a term that represents the side effects of production of goods or services on other people not directly involved in the activity. The externalities can be identified and related to the term environmental cost. The environmental cost is a externality that somehow affects the environment, converted into economic terms, to then be compared with other costs of an action or enterprise. The environmental cost can be calculated through programs for that purpose, however for the nuclear area is the most used SIMPACTS, developed by the International Atomic Energy Agency (IAEA). The motivation for this work arose from the need to have a complete assessment of environmental costs from nuclear power reactors, although it is known that this kind of form of energy generation show an advantage over others with regard to externalities. This work is the first step in implementing the program SIMPACTS in plant Angra 2 in order to calculate the environmental cost of their operation. The objective is to develop a methodology for calculating environmental cost for nuclear power reactors. SIMPACTS program will be used to identify the advantages and disadvantages of a cost analysis of environmental and perform the calculation of environmental costs for Angra 2, with the aim of minimizing the environmental impacts of its operation. From an extensive literature search, is presented in this paper the methodology for calculating the environmental cost of the program SIMPACTS and some results of calculations with the environmental cost in international power reactors other power generation plants. (author)

Study of the environmental costs to nuclear power plants using the SIMPACTS program

International Nuclear Information System (INIS)

Menzel, Francine; Sabundjian, Gaiane; Mutarelli, Rita de Cassia

2011-01-01

The nuclear energy presents advantages in comparison with other kinds of energy sources, when their externalities are evaluated. Externality is a term that represents the side effects of production of goods or services on other people not directly involved in the activity. The externalities can be identified and related to the term environmental cost. The environmental cost is a externality that somehow affects the environment, converted into economic terms, to then be compared with other costs of an action or enterprise. The environmental cost can be calculated through programs for that purpose, however for the nuclear area is the most used SIMPACTS, developed by the International Atomic Energy Agency (IAEA). The motivation for this work arose from the need to have a complete assessment of environmental costs from nuclear power reactors, although it is known that this kind of form of energy generation show an advantage over others with regard to externalities. This work is the first step in implementing the program SIMPACTS in plant Angra 2 in order to calculate the environmental cost of their operation. The objective is to develop a methodology for calculating environmental cost for nuclear power reactors. SIMPACTS program will be used to identify the advantages and disadvantages of a cost analysis of environmental and perform the calculation of environmental costs for Angra 2, with the aim of minimizing the environmental impacts of its operation. From an extensive literature search, is presented in this paper the methodology for calculating the environmental cost of the program SIMPACTS and some results of calculations with the environmental cost in international power reactors other power generation plants. (author)

The Effect of Social perception of environmental problems and goods on the practice of cost-benefit analysis

Energy Technology Data Exchange (ETDEWEB)

Bunuel, M.; Delgado, M. L.

2002-07-01

When revealed, willingness to pay (WTP) is considerably lesser than willingness to accept (WTA), as economists explain. Sociological studies in Spain reveal that citizens assign a high value to the environment (high WTA), but are not ready to pay to preserve it (low WTP)because they think that it is industrial sector and the government's responsibility. This is a new factor, not studied before, that may result in underestimating environmental goods when WTP is used. The gap between WTP and WTA makes cost-benefits analysis difficult, creating the risk of environmental political judgments being replaced by pseudo scientific noise instead of by objective economic analysis.hence, it is sometimes convenient to use alternative methods to cost-benefit analysis: cost-effectiveness analysis trade-off analysis, economic-impact valuation, and risk-benefit analysis. (Author)

Environmental costs of transport; Liikenteen paeaestoekustannukset

Energy Technology Data Exchange (ETDEWEB)

Gynther, L.; Tervonen, J.; Hippinen, I.; Loven, K.; Salmi, J.; Soares, J.; Torkkeli, S.; Tikka, T.

2012-07-01

This study presents the estimated total environmental costs of airborne pollutants in road, rail and water transport in Finland and the unit costs of emissions used in socio-economic impact assessments of the transport system. The estimations are based on emission inventory for the year 2007 and the results are shown in prices of 2010. The study updates previous estimates dating back ten years. The total environmental cost of airborne pollutants in transport is estimated at 900 million euros. This is composed of 820 million euros attributable to fuel use and street dust, 54 million euros to the front end of fuel chains and 26 million euros to waste from water transport. The share of road transport in the total cost is 695 million euros, water transport 190 million euros and rail transport just under 15 million euros. The assessment covers the impacts of pollutants on health (increased mortality and morbidity) and flora (crop losses and decreased forest growth) as well as the cost of climate change. In addition to fuel emissions, also street dust is included in the analysis. In water transport the evaluation is extended to solid and liquid waste. In addition to fuel use, also other steps in the fuel chains, namely production, transport, refining and distribution, are covered by the study. The environmental unit costs of primary particles, sulphates and nitrates vary geographically and between different transport modes. The differences are particularly distinctive for particle emissions from road transport. The environmental unit costs of hydrocarbons and greenhouse gasses are the same for all transport modes in all traffic environments and all parts of the country. The impact assessment and monetary valuation of airborne pollutants was principally carried out by using the Impact Pathway Method. The method starts with an emissions inventory and estimation of the consequent pollutant concentrations followed by assessment of physical impacts, and finally monetary

Corporate social responsible costs in the environmental area

Directory of Open Access Journals (Sweden)

Sefa Boria-Reverter

2013-09-01

Full Text Available Purpose: To know how the application of environmental politicies facilitates the identification of unknown costs and their next reaction. Moreover we try to determine, if these costs have a connection with the different environmental strategies, which are used. Design/methodology/approach: An empiric study was done through a telephonic survey all over Spain in 2012. The idea was to obtain a representative sample. From 943 companies, the survey was answered by 141 of them. Findings and Originality/value: It is shown the relationship between the costs behavior, knowledge of the unknown and hidden costs with the environmental strategies. Research limitations/implications: To dispose a bigger sample, this allowed us to obtain results in relationship with sectors type and to verify the result for regions. Practical implications: The organizations can be aware of costs reaction, depending on their action in the environmental area. Originality/value: Environmental politicies in the CSR field facilitate unknown or hidden costs detection and they allow their evaluation and the decisions about them. The obtained improvements can revert to the society due to the development of environmental politicies and they offer a competitive advantage for the company.

Environmentally friendly synthesis of organic-soluble silver nanoparticles for printed electronics

International Nuclear Information System (INIS)

Lee, Kwi Jong; Jun, Byung Ho; Choi, Junrak; Lee, Young Il; Joung, Jaewoo; Oh, Yong Soo

2007-01-01

In this study, we attempted to synthesize organic-soluble silver nanoparticles in the concentrated organic phase with an environmentally friendly method. The fully organic phase system contains silver acetate as a silver precursor, oleic acid as both a medium and a capping molecule, and tin acetate as a reducing agent. Monodisperse silver nanoparticles with average diameters of ca. 5 nm can be easily synthesized at large scale. Only a small usage of tin acetate ( 90%). Also, it was investigated that the residual tin atom does not exist in the synthesized silver nanoparticles. This implied that tin acetate acts as a reducing catalyst

Cost-effectiveness of environmental-structural communication interventions for HIV prevention in the female sex industry in the Dominican Republic.

Science.gov (United States)

Sweat, Michael; Kerrigan, Deanna; Moreno, Luis; Rosario, Santo; Gomez, Bayardo; Jerez, Hector; Weiss, Ellen; Barrington, Clare

2006-01-01

Behavior change communication often focuses on individual-level variables such as knowledge, perceived risk, self-efficacy, and behavior. A growing body of evidence suggests, however, that structural interventions to change the policy environment and environmental interventions designed to modify the physical and social environment further bolster impact. Little is known about the cost-effectiveness of such comprehensive intervention programs. In this study we use standard cost analysis methods to examine the incremental cost-effectiveness of two such interventions conducted in the Dominican Republic in sex establishments. In Santo Domingo the intervention was environmental; in Puerto Plata it was both environmental and structural (levying financial sanctions on sex establishment owners who failed to follow the intervention). The interventions in both sites included elements found in more conventional behavior change communication (BCC) programs (e.g., community mobilization, peer education, educational materials, promotional stickers). One key aim was to examine whether the addition of policy regulation was cost-effective. Data for the analysis were gleaned from structured behavioral questionnaires administered to female sex workers and their male regular paying partners in 41 sex establishments conducted pre- and post-intervention (1 year follow-up); data from HIV sentinel surveillance, STI screening results conducted for the intervention; and detailed cost data we collected. We estimated the number of HIV infections averted from each of the two intervention models and converted these estimates to the number of disability life years saved as compared with no intervention. One-way, two-way, three-way, and multivariate sensitivity analysis were conducted on model parameters. We examine a discount rate of 0%, 3% (base case), and 6% for future costs and benefits. The intervention conducted in Santo Domingo (community mobilization, promotional media, and interpersonal

Phytofilter - environmental friendly solution for purification of surface plate from urbanized territories

Science.gov (United States)

Ruchkinova, O.; Shchuckin, I.

2017-06-01

Its proved, that phytofilters are environmental friendly solution of problem of purification of surface plate from urbanized territories. Phytofilters answer the nowadays purposes to systems of purification of land drainage. The main problem of it is restrictions, connecter with its use in the conditions of cold temperature. Manufactured a technology and mechanism, which provide a whole-year purification of surface plate and its storage. Experimentally stated optimal makeup of filtering load: peat, zeolite and sand in per cent of volume, which provides defined hydraulic characteristics. Stated sorbate and ion-selective volume of complex filtering load of ordered composition in dynamic conditions. Estimated dependences of exit concentrations of oil products and heavy metals on temperature by filtering through complex filtering load of ordered composition. Defined effectiveness of purification at phytofiltering installation. Fixed an influence of embryophytes on process of phytogeneration and capacity of filtering load. Recommended swamp iris, mace reed and reed grass. Manufactured phytofilter calculation methodology. Calculated economic effect from use of phytofiltration technology in comparison with traditional block-modular installations.

Environmental Cost Accounting Information and Strategic Business Decision in Nigeria

Directory of Open Access Journals (Sweden)

Ebipanipre Gabriel Mieseigha

2014-08-01

Full Text Available This study aimed at examining environmental cost accounting information and strategic business decision in Nigeria. The general assumption that conventional cost accounting does not have the ability to provide absolute information for evaluating the environmental behaviour of an organization and its economic consequences has motivated this study. Towards achieving this, secondary data was employed and a linear model was specified. Findings indicated that environmental cost accounting information as it relates to strategic business decision is valuerelevant. It was on this note that we recommended firms to constantly reposition their accounting system in order to provide information on environmental costs so that the true costs in an organization can be ascertained and properly allocated. Also, due attention should be paid to waste management costs, employee health costs, investment financing costs, compliance and environmental costs and all environmental related costs by manufacturing concerns since they influence strategic decision. Our study is one of those that have explored the issue of environmental cost accounting relevance in strategic business decision in the Nigerian context.

Environmentally friendly synthesis of highly monodisperse biocompatible gold nanoparticles with urchin-like shape.

Science.gov (United States)

Lu, Lehui; Ai, Kelong; Ozaki, Yukihiro

2008-02-05

We report a facile and environmentally friendly strategy for high-yield synthesis of highly monodisperse gold nanoparticles with urchin-like shape. A simple protein, gelatin, was first used for the control over shape and orientation of the gold nanoparticles. These nanoparticles, ready to use for biological systems, are promising in the optical imaging-based disease diagnostics and therapy because of their tunable surface plasmon resonance (SPR) and excellent surface-enhanced Raman scattering (SERS) activity.

Environmentally friendly chemoselective oxidation of primary aliphatic amines by using a biomimetic electrocatalytic system.

Science.gov (United States)

Largeron, Martine; Chiaroni, Angèle; Fleury, Maurice-Bernard

2008-01-01

Environmentally friendly oxidation of primary aliphatic amines to imines has been successfully achieved, under metal-free conditions, by the use of diverse electrogenerated o-azaquinone mediators. High catalytic performance, together with high chemoselectivity, were observed with electron-poor o-azaquinone catalysts generated from 2-aminoresorcinol derivatives. Similar to copper amine oxidase enzymes, these mediators exhibited lower reactivity toward alpha-branched primary amines and no reactivity toward secondary amines. In the case of 3,4-aminophenol derivatives lacking a 2-hydroxy group, the generated o-azaquinone species failed to catalyze the oxidation of the amine to the corresponding imine. Further mechanistic considerations allowed a rationalization of the crucial role of the 2-hydroxy group in converting a catalytically inert species into a highly effective biomimetic catalyst.

Optimized Solvent for Energy-Efficient, Environmentally-Friendly Capture of CO{sub 2} at Coal-Fired Power Plants

Energy Technology Data Exchange (ETDEWEB)

Farthing, G. A.; Rimpf, L. M.

2014-04-30

The overall goal of this project, as originally proposed, was to optimize the formulation of a novel solvent as a critical enabler for the cost-effective, energy-efficient, environmentally-friendly capture of CO{sub 2} at coal-fired utility plants. Aqueous blends of concentrated piperazine (PZ) with other compounds had been shown to exhibit high rates of CO{sub 2} absorption, low regeneration energy, and other desirable performance characteristics during an earlier 5-year development program conducted by B&W. The specific objective of this project was to identify PZ-based solvent formulations that globally optimize the performance of coal-fired power plants equipped with CO{sub 2} scrubbing systems. While previous solvent development studies have tended to focus on energy consumption and absorber size, important issues to be sure, the current work seeks to explore, understand, and optimize solvent formulation across the full gamut of issues related to commercial application of the technology: capital and operating costs, operability, reliability, environmental, health and safety (EH&S), etc. Work on the project was intended to be performed under four budget periods. The objective of the work in the first budget period has been to identify several candidate formulations of a concentrated PZ-based solvent for detailed characterization and evaluation. Work in the second budget period would generate reliable and comprehensive property and performance data for the identified formulations. Work in the third budget period would quantify the expected performance of the selected formulations in a commercial CO{sub 2} scrubbing process. Finally, work in the fourth budget period would provide a final technology feasibility study and a preliminary technology EH&S assessment. Due to other business priorities, however, B&W has requested that this project be terminated at the end of the first budget period. This document therefore serves as the final report for this project. It

Environmental protection using social costing

International Nuclear Information System (INIS)

Lee, R.

1993-01-01

Emissions and other residual wastes come from industrial production, commercial and household activities, and transportation. These wastes damage the environment, including human health. As economies grow, so does concern about balancing that growth with the desire for environmental protection. At issue is how much environmental protection we should have. We address this issue using the concept of social costing. The issue is discussed in the context of electric power generation. There is particular concern about the use of fossil fuels such as petroleum, the major fuel used in the Republic of China, and coal which is the most common fuel used in the U. S. Electric power generation is a major source of airborne pollutants such as SO 2 , NO x particulate matter, volatile organic compounds, CO, and CO 2 . It also results in liquid and solid wastes, and other effects such as changes in land use. To generate electric power, fuel (such as petroleum, coal or enriched uranium) or some other resource (e.g., wind or geothermal) is needed. A fuel cycle consists of a sequence of activities and processes involved in generating electric power. These activities include fuel extraction, treatment and processing; fuel conversion into electricity; transmission; waste disposal; and transportation of fuel and wastes between the different stages of the fuel cycle. Each stage results in emissions or other residuals. Several recent-studies have been about the environmental costs of electricity

Water-soluble resist for environmentally friendly lithography

Science.gov (United States)

Lin, Qinghuang; Simpson, Logan L.; Steinhaeusler, Thomas; Wilder, Michelle; Willson, C. Grant; Havard, Jennifer M.; Frechet, Jean M. J.

1996-05-01

This paper describes an 'environmentally friendly,' water castable, water developable photoresist system. The chemically amplified negative-tone resist system consists of three water-soluble components: a polymer, poly(methyl acrylamidoglycolate methyl ether), [poly(MAGME)]; a photoacid generator, dimethyl dihydroxyphenylsulfonium triflate and a crosslinker, butanediol. Poly(MAGME) was synthesized by solution free radical polymerization. In the three-component resist system, the acid generated by photolysis of the photoacid generator catalyzes the crosslinking of poly(MAGME) in the exposed regions during post-exposure baking, thus rendering the exposed regions insoluble in water. Negative tone relief images are obtained by developing with pure water. The resist is able to resolve 1 micrometer line/space features (1:1 aspect ratio) with an exposure dose of 100 mJ/cm2 at 248 nm. The resist can be used to generate etched copper relief images on printed circuit boards using aqueous sodium persulfate as the etchant. The crosslinking mechanism has been investigated by model compound studies using 13C NMR. These studies have revealed that the acid catalyzed reaction of the poly(MAGME) with butanediol proceeds via both transesterification and transacetalization (transaminalization) reactions at low temperatures, and also via transamidation at high temperatures.

Note: Fabrication of a fast-response and user-friendly environmental chamber for atomic force microscopes

Energy Technology Data Exchange (ETDEWEB)

Ji, Yanfeng; Hui, Fei; Shi, Yuanyuan; Han, Tingting; Song, Xiaoxue; Pan, Chengbin; Lanza, Mario, E-mail: mlanza@suda.edu.cn [Institute of Functional Nano & Soft Materials, Soochow University, Collaborative Innovation Center of Suzhou Nano Science & Technology, 199 Ren-Ai Road, Suzhou 215123 (China)

2015-10-15

The atomic force microscope is one of the most widespread tools in science, but many suppliers do not provide a competitive solution to make experiments in controlled atmospheres. Here, we provide a solution to this problem by fabricating a fast-response and user-friendly environmental chamber. We corroborate the correct functioning of the chamber by studying the formation of local anodic oxidation on a silicon sample (biased under opposite polarities), an effect that can be suppressed by measuring in a dry nitrogen atmosphere. The usefulness of this chamber goes beyond the example here presented, and it could be used in many other fields of science, including physics, mechanics, microelectronics, nanotechnology, medicine, and biology.

Consideration of environmental externality costs in electric utility resource selections and regulation

International Nuclear Information System (INIS)

Ottinger, R.L.

1990-01-01

A surprising number of state electric utility regulatory commissions (half) have started to require consideration of environmental externality costs in utility planning and resource selection. The principal rationale for doing so is that electric utility operations impose very real and large damages to human health and the environment which are not taken into account by traditional utility least cost planning, resource selection procedures, or by government pollution regulation. These failures effectively value the residual environmental costs to society of utility operations at zero. The likely future prospect for more stringent governmental pollution regulation renders imprudent the selection of resources without taking environmental externality costs into consideration. Most regulatory commissions requiring environmental externality consideration have left it to the utilities to compute the societal costs, although a few have either set those costs themselves or used a proxy adder to polluting resource costs (or bonus for non-polluting resources). These commissions have used control or pollution mitigation costs, rather than societal damage costs, in their regulatory computations. This paper recommends that damage costs be used where adequate studies exist to permit quantification, discusses the methodologies for their measurement, and describes the means that have been and might be used for their incorporation

Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

OpenAIRE

Messagie, Maarten; Lebeau, Kenneth; Coosemans, Thierry; Macharis, Cathy; Mierlo, Joeri van

2013-01-01

Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventi...

New trends in sample preparation techniques for environmental analysis.

Science.gov (United States)

Ribeiro, Cláudia; Ribeiro, Ana Rita; Maia, Alexandra S; Gonçalves, Virgínia M F; Tiritan, Maria Elizabeth

2014-01-01

Environmental samples include a wide variety of complex matrices, with low concentrations of analytes and presence of several interferences. Sample preparation is a critical step and the main source of uncertainties in the analysis of environmental samples, and it is usually laborious, high cost, time consuming, and polluting. In this context, there is increasing interest in developing faster, cost-effective, and environmentally friendly sample preparation techniques. Recently, new methods have been developed and optimized in order to miniaturize extraction steps, to reduce solvent consumption or become solventless, and to automate systems. This review attempts to present an overview of the fundamentals, procedure, and application of the most recently developed sample preparation techniques for the extraction, cleanup, and concentration of organic pollutants from environmental samples. These techniques include: solid phase microextraction, on-line solid phase extraction, microextraction by packed sorbent, dispersive liquid-liquid microextraction, and QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe).

Simple gases to replace non-environmentally friendly polymer foaming agents. A thermodynamic investigation

International Nuclear Information System (INIS)

Grolier, Jean-Pierre E.; Randzio, Stanislaw L.

2012-01-01

Highlights: ► The PVT-vibrating wire technique and PVT-scanning transitiometry. ► Polymer swelling with measured gas sorption and gas–polymer interaction energies. ► Experimental measurements up to 373 K and 100 MPa. ► Hydrostatic and plasticization effects under high pressure gas and induced T g -shifts. ► Thermodynamic study of the (gas + polymer) systems polystyrene with CO 2 , N 2 , and freons. - Abstract: Foaming constitutes one of the most important industrial activities in polymer engineering to produce efficient thermal insulating materials. In particular, rigid insulating boards are produced worldwide on a large scale using blowing agents which eventually are released in the environment where they adversely impact the natural friendly stratospheric ozone layer. Concomitantly, the chemicals used as blowing agents contribute to the creation of the unfriendly tropospheric ozone layer generating the disastrous green house effect around our planet. The traditional foaming intermediates currently named freons, like chlorofluorocarbons (CFCs) currently used as blowing agents as well as the hydrochlorofluorocarbons (HCFCs) often considered as alternative blowing agents, must be banned from industrial processes and new (friendly) foaming agents have to be suggested and evaluated in terms of both easy engineering and environmental neutrality. Undoubtedly thermodynamics plays a major role in assessing the effective capability of those chemicals. Some CFCs still accepted and other possible simple gases like carbon dioxide and nitrogen have been considered. The in-depth thermodynamic investigation has been made possible thanks to new experimental developments to determine gas solubility in polymers and associated swelling as well as the thermodynamic properties of (gas + polymer) systems, including the thermophysical properties of polymers under gas sorption. Pertinent data have been generated for such properties over extended T and p ranges.

Environmental cost-effectiveness analysis in intertemporal natural resource policy: evaluation of selective fishing gear.

Science.gov (United States)

Kronbak, Lone Grønbæk; Vestergaard, Niels

2013-12-15

In most decision-making involving natural resources, the achievements of a given policy (e.g., improved ecosystem or biodiversity) are rather difficult to measure in monetary units. To address this problem, the current paper develops an environmental cost-effectiveness analysis (ECEA) to include intangible benefits in intertemporal natural resource problems. This approach can assist managers in prioritizing management actions as least cost solutions to achieve quantitative policy targets. The ECEA framework is applied to a selective gear policy case in Danish mixed trawl fisheries in Kattegat and Skagerrak. The empirical analysis demonstrates how a policy with large negative net benefits might be justified if the intangible benefits are included. Copyright © 2013 Elsevier Ltd. All rights reserved.

Natural cork agglomerate employed as an environmentally friendly solution for quiet sandwich composites.

Science.gov (United States)

Sargianis, James; Kim, Hyung-ick; Suhr, Jonghwan

2012-01-01

Carbon fiber-synthetic foam core sandwich composites are widely used for many structural applications due to their superior mechanical performance and low weight. Unfortunately these structures typically have very poor acoustic performance. There is increasingly growing demand in mitigating this noise issue in sandwich composite structures. This study shows that marrying carbon fiber composites with natural cork in a sandwich structure provides a synergistic effect yielding a noise-free sandwich composite structure without the sacrifice of mechanical performance or weight. Moreover the cork-core sandwich composites boast a 250% improvement in damping performance, providing increased durability and lifetime operation. Additionally as the world seeks environmentally friendly materials, the harvesting of cork is a natural, renewable process which reduces subsequent carbon footprints. Such a transition from synthetic foam cores to natural cork cores could provide unprecedented improvements in acoustic and vibrational performance in applications such as aircraft cabins or wind turbine blades.

A Bottom-up Approach to Environmental Cost-Benefit Analysis

DEFF Research Database (Denmark)

Carolus, Johannes Friedrich; Hanley, Nick; Olsen, Søren Bøye

with the underlying environmental problem, and then assesses costs and benefits of various strategies and solutions suggested by local and directly affected stakeholders. For empirical case studies concerning two river catchments in Sweden and Latvia, the bottom-up CBA approach utilises local knowledge, assesses......Cost-Benefit Analysis is a method to assess the effects of policies and projects on social welfare. CBAs are usually applied in a top-down approach, in the sense that a decision-making body first decides on which policies or projects are to be considered, and then applies a set of uniform criteria...... plans which are not only developed for local conditions but are also likely to be more acceptable to local society, and sheds additional light on possible distributional effects. By not only benefitting from, but also supporting participative environmental planning, bottom-up CBA is in line...

Environmental taxes and transaction costs

Energy Technology Data Exchange (ETDEWEB)

Vollebergh, Herman R.J. [Centre for Economic Policy OCFEB, Erasmus University Rotterdam (Netherlands)

1994-06-01

A well-known tax policy principle in the case of environmental bads holds that optimality would apply to a special class of environmental taxes, the so called Pigovian or effluent taxes (or fees or charges). However, an interesting paradox arises here for effluent taxes are seldom chosen in practical policies by governments. An explanation for this discrepancy is that effluent taxes are generally supposed to bring about the highest amount of transaction costs in order to enforce this kind of tax. This would be caused by the fact that usually large numbers of agents are involved if effluents are taken as the principal tax base. Unfortunately this explanation seems to boomerang for it brings about an impossibility result: effluent taxes can never be first best taxes if transaction costs are allowed. Up till now theoretical economics has not paid much attention to this problem. In contrast this essay offers an explanation for the discrepancy and it shows why the impossibility theorem is a paradox. As soon as one allows for transaction costs in welfare analysis, one not only has to acknowledge that such costs are attached to the internalization device but also to the initial status quo. Moreover, the amount of transaction costs is not independent of the tax contracts themselves, neither are the benefits of regulation through taxation. Accordingly a more general welfare assessment of questions where it is optimal to levy environmental taxes shows that first best Pigovian taxes need not be effluent taxes (even if abatement is possible), although in some cases effluent taxes might still be the best policy option from an economic perspective. 31 refs.

Environmental taxes and transaction costs

International Nuclear Information System (INIS)

Vollebergh, Herman R.J.

1994-06-01

A well-known tax policy principle in the case of environmental bads holds that optimality would apply to a special class of environmental taxes, the so called Pigovian or effluent taxes (or fees or charges). However, an interesting paradox arises here for effluent taxes are seldom chosen in practical policies by governments. An explanation for this discrepancy is that effluent taxes are generally supposed to bring about the highest amount of transaction costs in order to enforce this kind of tax. This would be caused by the fact that usually large numbers of agents are involved if effluents are taken as the principal tax base. Unfortunately this explanation seems to boomerang for it brings about an impossibility result: effluent taxes can never be first best taxes if transaction costs are allowed. Up till now theoretical economics has not paid much attention to this problem. In contrast this essay offers an explanation for the discrepancy and it shows why the impossibility theorem is a paradox. As soon as one allows for transaction costs in welfare analysis, one not only has to acknowledge that such costs are attached to the internalization device but also to the initial status quo. Moreover, the amount of transaction costs is not independent of the tax contracts themselves, neither are the benefits of regulation through taxation. Accordingly a more general welfare assessment of questions where it is optimal to levy environmental taxes shows that first best Pigovian taxes need not be effluent taxes (even if abatement is possible), although in some cases effluent taxes might still be the best policy option from an economic perspective. 31 refs

Environmentally Friendly Coating Technology for Autonomous Corrosion Control

Science.gov (United States)

Calle, Luz M.; Li, Wenyan; Buhrow, Jerry W.; Johnsey, Marissa N.; Jolley, Scott T.; Pearman, Benjamin P.; Zhang, Xuejun; Fitzpatrick, Lilliana; Gillis, Mathew; Blanton, Michael;

Cost effectiveness of the Dutch incentive for the environmental quality of power generation (MEP)

International Nuclear Information System (INIS)

Melgerd, R.

2005-01-01

This article relates to research on the cost effectiveness of the MEP scheme ('Milieukwaliteit Elektriciteitsproductie' or Environmental Quality of Electricity Generation), carried out as a graduation project at the Vrije Universiteit, Amsterdam, Netherlands. MEP subsidies are intended to promote investment in sustainable energy sources in the Netherlands by offering investors more certainty and a simpler structure than previous energy subsidies. The MEP also helps prevent Dutch taxpayers' money 'leaking' abroad to purchase sustainable electricity produced cheaper elsewhere. This makes the MEP measurably more effective than its predecessors. The scheme is moreover a step towards the effective deployment of state funds for the reduction of CO2 emission [nl

Bridging environmental and financial cost of dairy production: A case study of Irish agricultural policy.

Science.gov (United States)

Chen, Wenhao; Holden, Nicholas M

2018-02-15

The Irish agricultural policy 'Food Harvest 2020' is a roadmap for sectoral expansion and Irish dairy farming is expected to intensify, which could influence the environmental and economic performance of Irish milk production. Evaluating the total environmental impacts and the real cost of Irish milk production is a key step towards understanding the possibility of sustainable production. This paper addresses two main issues: aggregation of environmental impacts of Irish milk production by monetization, to understand the real cost of Irish milk production, including the environmental costs; and the effect of the agricultural policy 'Food Harvest 2020' on total cost (combining financial cost and environmental cost) of Irish milk production. This study used 2013 Irish dairy farming as a baseline, and defined 'bottom', 'target' and 'optimum' scenarios, according to the change of elementary inputs required to meet agricultural policy ambitions. The study demonstrated that the three monetization methods, Stepwise 2006, Eco-cost 2012 and EPS 2000, could be used for aggregating different environmental impacts into monetary unit, and to provide an insight for evaluating policy related to total environmental performance. The results showed that the total environmental cost of Irish milk production could be greater than the financial cost (up to €0.53/kg energy corrected milk). The dairy expansion policy with improved herbage utilization and fertilizer application could reduce financial cost and minimize the total environmental cost of per unit milk produced. Copyright © 2017 Elsevier B.V. All rights reserved.

Time and travel costs incurred by women attending antenatal tests: A costing study.

Science.gov (United States)

Verhoef, Talitha I; Daley, Rebecca; Vallejo-Torres, Laura; Chitty, Lyn S; Morris, Stephen

2016-09-01

to estimate the costs to women, their friends and family for different antenatal tests in the Down's syndrome (DS) screening pathway. questionnaire-based costing study. eight maternity clinics across the UK. pregnant women (n=574) attending an appointment for DS screening, NIPT or invasive testing between December 2013 and September 2014. using data collected from the questionnaires we calculated the total costs to women by multiplying the time spent at the hospital and travelling to and from it by the opportunity costs of the women and accompanying person and adding travel and childcare costs. Assumptions about the value of opportunity costs were tested in one-way sensitivity analyses. The main outcome measure was the mean cost to the women and friends/family for each test (DS screening, NIPT, and invasive testing). mean costs to women and their family/friend were £33.96 per visit, of which £22.47 were time costs, £9.15 were travel costs and £2.34 were childcare costs. Costs were lowest for NIPT (£22), £32 for DS screening (£44 if combined with NIPT), and highest for invasive testing (£60). Sensitivity analysis revealed that variations around the value of leisure time opportunity costs had the largest influence on the results. there are considerable costs to women, their friends and family when attending different tests in the DS screening pathway. when assessing the cost-effectiveness of changes to this pathway, costs to women should be considered. Copyright © 2016 Elsevier Ltd. All rights reserved.

Biodegradation performance of environmentally-friendly insulating oil

Science.gov (United States)

Yang, Jun; He, Yan; Cai, Shengwei; Chen, Cheng; Wen, Gang; Wang, Feipeng; Fan, Fan; Wan, Chunxiang; Wu, Liya; Liu, Ruitong

2018-02-01

In this paper, biodegradation performance of rapeseed insulating oil (RDB) and FR3 insulating oil (FR3) was studied by means of ready biodegradation method which was performed with Organization for Economic Co-operation and Development (OECD) 301B. For comparison, the biodegradation behaviour of 25# mineral insulating oil was also characterized with the same method. The testing results shown that the biodegradation degree of rapeseed insulating oil, FR3 insulating oil and 25# mineral insulating oil was 95.8%, 98.9% and 38.4% respectively. Following the “new chemical risk assessment guidelines” (HJ/T 154 - 2004), which illustrates the methods used to identify and assess the process safety hazards inherent. The guidelines can draw that the two vegetable insulating oils, i.e. rapeseed insulating oil and FR3 insulating oil are easily biodegradable. Therefore, the both can be classified as environmentally-friendly insulating oil. As expected, 25# mineral insulating oil is hardly biodegradable. The main reason is that 25# mineral insulating oil consists of isoalkanes, cyclanes and a few arenes, which has few unsaturated bonds. Biodegradation of rapeseed insulating oil and FR3 insulating oil also remain some difference. Biodegradation mechanism of vegetable insulating oil was revealed from the perspective of hydrolysis kinetics.

Ecological-friendly pigments from fungi.

Science.gov (United States)

Durán, Nelson; Teixeira, Maria F S; De Conti, Roseli; Esposito, Elisa

2002-01-01

The dyestuff industry is suffering from the increases in costs of feedstock and energy for dye synthesis, and they are under increasing pressure to minimize the damage to the environment. The industries are continuously looking for cheaper, more environmentally friendly routes to existing dyes. The aim of this minireview is to discuss the most important advances in the fungal pigment area and its interest in biotechnological applications. Characteristic pigments are produced by a wide variety of fungi and the chemical composition of natural dyes are described. These pigments exhibit several biological activities besides cytotoxicity. The synthetic pigments authorized by the EC and in USA and the natural pigments available in the world market are discussed. The obstacle to the exploitation of new natural pigments sources is the food legislation, requesting costly toxicological research, manufacturing costs, and acceptance by consumers. The dislike for novel ingredients is likely to be the biggest impediment for expansion of the pigment list in the near future. If the necessary toxicological testing and the comparison with accepted pigments are made, the fungal pigments, could be acceptable by the current consumer. The potentiality of pigment production in Brazil is possible due to tremendous Amazonian region biodiversity.

BUMPER: the Bayesian User-friendly Model for Palaeo-Environmental Reconstruction

Science.gov (United States)

Holden, Phil; Birks, John; Brooks, Steve; Bush, Mark; Hwang, Grace; Matthews-Bird, Frazer; Valencia, Bryan; van Woesik, Robert

2017-04-01

We describe the Bayesian User-friendly Model for Palaeo-Environmental Reconstruction (BUMPER), a Bayesian transfer function for inferring past climate and other environmental variables from microfossil assemblages. The principal motivation for a Bayesian approach is that the palaeoenvironment is treated probabilistically, and can be updated as additional data become available. Bayesian approaches therefore provide a reconstruction-specific quantification of the uncertainty in the data and in the model parameters. BUMPER is fully self-calibrating, straightforward to apply, and computationally fast, requiring 2 seconds to build a 100-taxon model from a 100-site training-set on a standard personal computer. We apply the model's probabilistic framework to generate thousands of artificial training-sets under ideal assumptions. We then use these to demonstrate both the general applicability of the model and the sensitivity of reconstructions to the characteristics of the training-set, considering assemblage richness, taxon tolerances, and the number of training sites. We demonstrate general applicability to real data, considering three different organism types (chironomids, diatoms, pollen) and different reconstructed variables. In all of these applications an identically configured model is used, the only change being the input files that provide the training-set environment and taxon-count data.

Environmental Public Health Tracking: a cost-effective system for characterizing the sources, distribution and public health impacts of environmental hazards.

Science.gov (United States)

Saunders, P J; Middleton, J D; Rudge, G

2017-09-01

The contemporary environment is a complex of interactions between physical, biological, socio-economic systems with major impacts on public health. However, gaps in our understanding of the causes, extent and distribution of these effects remain. The public health community in Sandwell West Midlands has collaborated to successfully develop, pilot and establish the first Environmental Public Health Tracking (EPHT) programme in Europe to address this 'environmental health gap' through systematically linking data on environmental hazards, exposures and diseases. Existing networks of environmental, health and regulatory agencies developed a suite of innovative methods to routinely share, integrate and analyse data on hazards, exposures and health outcomes to inform interventions. Effective data sharing and horizon scanning systems have been established, novel statistical methods piloted, plausible associations framed and tested, and targeted interventions informed by local concerns applied. These have influenced changes in public health practice. EPHT is a powerful tool for identifying and addressing the key environmental public health impacts at a local level. Sandwell's experience demonstrates that it can be established and operated at virtually no cost. The transfer of National Health Service epidemiological skills to local authorities in 2013 provides an opportunity to expand the programme to fully exploit its potential. © The Author 2016. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

The cost-effectiveness and return-on-investment of a combined social and physical environmental intervention in office employees

NARCIS (Netherlands)

van Dongen, J M; Coffeng, J K; van Wier, M F; Boot, Cecile R. L.; Hendriksen, I.J.M.; van Mechelen, W.; Bongers, Paulien M.; Van Der Beek, Allard J.; Bosmans, J E; van Tulder, M W

2017-01-01

This study explored the cost-effectiveness and return-on-investment of a combined social and physical environmental worksite health promotion program compared with usual practice, and of both intervention conditions separately. Participants were randomized to the combined intervention (n = 92),

Environmental Parametric Cost Model in Oil and Gas EPC Contracts

Directory of Open Access Journals (Sweden)

Madjid Abbaspour

2018-01-01

Full Text Available This study aims at identifying the parameters that govern the environmental costs in oil and gas projects. An initial conceptual model was proposed. Next, the costs of environmental management work packages were estimated, separately and were applied in project control tools (WBS/CBS. Then, an environmental parametric cost model was designed to determine the environmental costs and relevant weighting factors. The suggested model can be considered as an innovative approach to designate the environmental indicators in oil and gas projects. The validity of variables was investigated based on Delphi method. The results indicated that the project environmental management’s weighting factor is 0.87% of total project’s weighting factor.

Issues and major steps in a conceptual framework for environmental costing

International Nuclear Information System (INIS)

DePape, D.; Kristjanson, E.R.; Onyebuchi, E.I.; Wojczynski, E.

1992-01-01

The concept of applying monetary values to environmental consequences as a means of integrating environmental considerations into utility resource planning is explored. The need for estimation and integration of environmental costs and benefits is becoming more important due to public concern over environmental degradation, rapidly increasing costs of mitigating environmental damage, increased liability for compensation for such damage, pressures to consider environmental externalities, and a corporate desire to operate responsibly. Manitoba Hydro established a task force to develop general approaches and specific techniques for evaluation and integration of environmental costs and benefits into utility planning. The utility's conceptual framework for monetizing and integrating environmental costs and benefits is described, including identification of potential environmental impacts, evaluation of environmental impacts, estimation of monetary and non-monetary costs and benefits, and integration of these costs and benefits into the resource planning process. Key issues that must be addressed to implement this conceptual framework include the need for earlier environmental impact assessments and the need for mitigation and compensation prediction methodologies. 1 fig., 1 tab

Passive low-cost inkjet-printed smart skin sensor for structural health monitoring

KAUST Repository

Cook, Benjamin Stassen; Shamim, Atif; Tentzeris, Manos

2012-01-01

presents a step towards fully integrated, low-cost, conformal and environmentally friendly smart skins for real-time monitoring of large structures. © The Institution of Engineering and Technology 2012.

Optimizing Data Centre Energy and Environmental Costs

Science.gov (United States)

Aikema, David Hendrik

Data centres use an estimated 2% of US electrical power which accounts for much of their total cost of ownership. This consumption continues to grow, further straining power grids attempting to integrate more renewable energy. This dissertation focuses on assessing and reducing data centre environmental and financial costs. Emissions of projects undertaken to lower the data centre environmental footprints can be assessed and the emission reduction projects compared using an ISO-14064-2-compliant greenhouse gas reduction protocol outlined herein. I was closely involved with the development of the protocol. Full lifecycle analysis and verifying that projects exceed business-as-usual expectations are addressed, and a test project is described. Consuming power when it is low cost or when renewable energy is available can be used to reduce the financial and environmental costs of computing. Adaptation based on the power price showed 10--50% potential savings in typical cases, and local renewable energy use could be increased by 10--80%. Allowing a fraction of high-priority tasks to proceed unimpeded still allows significant savings. Power grid operators use mechanisms called ancillary services to address variation and system failures, paying organizations to alter power consumption on request. By bidding to offer these services, data centres may be able to lower their energy costs while reducing their environmental impact. If providing contingency reserves which require only infrequent action, savings of up to 12% were seen in simulations. Greater power cost savings are possible for those ceding more control to the power grid operator. Coordinating multiple data centres adds overhead, and altering at which data centre requests are processed based on changes in the financial or environmental costs of power is likely to increase this overhead. Tests of virtual machine migrations showed that in some cases there was no visible increase in power use while in others power use

DECO FRECASE (drywall eco-friendly from eggshell and cane bagasse) as an innovation of eco-friendly interior construction

Science.gov (United States)

Imron, M. A.; Ahkam, D. N. I.; Hidayat, A. W.

2017-12-01

The number of factories and home industries, both upper and lower middle class certainly adds waste generated, resulting in environmental pollution. The development of buildings is one of the largest contributors to global warming. For that, it takes technological innovations that lead to the criteria of green building. The application of green material is important aspects of environmentally friendly development, the selection of materials on the green material criteria of both roles should be applied continuously in order to realize the environmental sustainability of the material. Utilization Waste eggshell and bagasse which is a community waste, has the potential to become innovative environmentally friendly building materials. The eggshell is composed of 94% calcium carbonate, 1% magnesium carbonate, 1% calcium phosphate, and 4% organic material, especially protein, while the bagasse has a high content of silica (SiO2). In this study, the compounds are used as raw material for making alternative drywall in the form of DECO FRECASE. DECO FRECASE is an innovation of environmentally friendly building materials as an interior wall construction. Through DECO FRECASE, it is expected that building material innovation in Indonesia can be improved and of course environmental problems can be minimized by utilizing it as raw material for building construction.

Biological invasions: economic and environmental costs of alien plant, animal, and microbe species

National Research Council Canada - National Science Library

Pimentel, David

2011-01-01

...: Economic and Environmental Costs of Alien Plant, Animal, and Microbe Species, this reference discusses how non-native species invade new ecosystems and the subsequent economic and environmental effects of these species...

Recognition of the Environmental Costs of Fossil Fuel Plants

Directory of Open Access Journals (Sweden)

Hakkı FINDIK

2015-12-01

Full Text Available Environment that is the natural residential area of live life is among the interests of the various sciences. Within the scope of accounting science, the concept of social awareness requires a social responsibility based approach and this causes some additional environmental costs emerged when interaction of business with their environment considered. In the Uniform Accounting Plan there exists a special account relating with monitoring, controlling and managing of environmental costs. This study deals with environmental accounting for enterprises and introduces determination and recognition of the environmental costs of fossil fuel plants that use coal as a fuel

Promoting energy-saving and environmentally friendly generation dispatching model in China: Phase development and case studies

International Nuclear Information System (INIS)

Ding, Yi; Yang, Hongliang

2013-01-01

Energy saving and environmental protection are important conditions for the sustainable development of Chinese economy. However current widely used generation scheduling model based on predefined production quota and tariff results in heavy energy consumption and severe environment pollution. From 2007, as concerns over energy shortage and environmental pollution, the Chinese authorities introduced the implementation of energy-saving generation dispatching model, which is an important approach to facilitating energy-saving and reduction of pollutant emission. The objective of implementing energy-saving generation dispatching model is to prioritize the use of renewable energy resources and new power plants with high efficiency without compromising power system security and reliability. This paper analyzes the necessity and feasibility of implementing energy-efficient and environmentally friendly generation scheduling models in China. The institutional and technical barriers impeding the implementation of energy-saving generation dispatching model are identified. The development of advanced energy-saving generation scheduling models towards competitive market models and phased planning programs are emphasized in this paper. The effectiveness and experience of provinces piloted energy-saving generation dispatching projects are also discussed. - Highlights: ► Introducing problems of current power generation scheduling model in China. ► Discussing necessity of implementing ESGD model and corresponding barriers. ► Proposing phased planning programs for developing ESGD models. ► Discussing the effectiveness and experience of provinces piloted ESGD projects

Environmental costs and resource planning consequences: New England electric's rating and weighting approach

International Nuclear Information System (INIS)

Destribats, A.F.; Hutchinson, M.A.; Stout, T.M.; White, D.S.

1990-01-01

In mid 1989, the New England Electric System (NEES or Company) began an effort to reflect the potential environmental externalities of new resources in its long range planning process. Having examined several methods for incorporating externalities, including cost of control, the Company adopted a rating and weighting approach. Not strictly quantitative nor qualitative, the rating and weighting approach provided a means to apply an environmental score to all new resources considered for the Company's long range resource plan, NEESPLAN 1990. A maximum environmental cost penalty of fifteen percent was applied to the resource considered for inclusion in the plan that posed the highest amount of potential environmental degradation. All other resources received a smaller penalty that was based on the ratio of their environmental score to the highest score. Application of this penalty tended to improve the cost-effectiveness of demand-side programs and worsen some supply-side options' cost-effectiveness. Both the rating and weighting approach employed by NEES and its application in the long range planning process have been the subject of several critical reviews. Having stated that the advantages of the rating and weighting approach include its easy reviewability and flexibility to be modified as better information becomes available, the Company has subsequently revised the approach to address the comments made by reviewers. The purpose of this paper is to describe the rating and weighting approach, its recent revisions, and the effect of the revised methodology on the Company's long range resource plan

An environmentally-friendly fluorescent method for quantification of lipid contents in yeast

DEFF Research Database (Denmark)

Severo Poli, Jandora; Lützhøft, Hans-Christian Holten; Karakashev, Dimitar Borisov

2014-01-01

lipid and the calibration curve showed linearity (R2 = 0.994) between 0.50 and 25 mg/L. Compared with traditional gravimetric analysis, the developed method is much faster and uses less organic solvents. Lipid contents determined by fluorescence and gravimetry were the same for some strains......This study aimed at developing an efficient, fast and environmentally-friendly method to quantify neutral lipid contents in yeast. After optimising the fluorescence instrument parameters and influence of organic solvent concentrations, a new method to quantify neutral lipids in yeast based......, but for other strains the lipid contents determined by fluorescence were less. This new method will therefore be suitable for fast screening purposes....

Accounting for external costs in a study of a Swedish district-heating system - An assessment of environmental policies

International Nuclear Information System (INIS)

Fahlen, E.; Ahlgren, E.O.

2010-01-01

Sweden has historically had strict emission control by implementation of economic policy instruments with the aim of internalising the external costs of air pollution. This study aims to evaluate how well current Swedish policy instruments reflect the environmental costs associated with heat generation in several district-heating (DH) plants in the DH system of Goeteborg. Furthermore, it aims to simulate and evaluate the operation of the DH system based on its social cost-effectiveness which takes into account the DH system's private and external costs (non-internalised environmental costs). The study shows that the economic policy instruments do not fully internalise all external costs whereas for certain technologies, the costs in terms of taxes, emission permits, environmental fees, etc. are higher than the environmental costs caused by the pollutants, given the environmental cost estimates used in the study. The simulation results show that the deviating internalisation of external costs affects the economic ranking of the different plants within the studied DH system. The estimated loss in social-cost effectiveness of the operation of the DH system of Goeteborg is noticable but relatively small if compared to the variable heat generation costs for most of the studied DH plants.

Capsule-type pe biogas digester: low-cost and environment friendly system

International Nuclear Information System (INIS)

Ahmad, S.; Khan, M.A.; Aslam, M.; Hussain, Z.

2005-01-01

The Indian model of the biogas digester has been introduced in the country during the last three decades, whereas the Chinese dome-type design could not be introduced due to the skills required for construction of this digester. The other problem associated with Chinese dome-type digester is that large quantities of solid waste are needed to fill the digester. The Chinese dome-type digester constructed on experimental basis could not perform satisfactorily. The Indian Model, although popular in the country, is not environment friendly and is of high cost, both in terms of capital investment and 0 and M. It creates quite dirty environment around the digester due to the free movement of slurry. It also creates problems of mosquitoes, as the environment. is conducive for their breeding. Taking into consideration, these limitations, design of polyethylene capsule-type digester (with black carbon and UV stabilizers) was developed, using water tanks normally constructed for domestic water storage by the local plastic companies. Modification was made in the PE water tank and one of the local companies collaborated to manufacture the capsule-type digester. Solid waste is introduced from the top, whereas the slurry can be disposed from the bottom through a controlled valve. Thus input of solid waste and slurry-disposal is now within the choice of the owner. The slurry can be disposed into a tank, where it can be composted to reduce the pH, before its use for agriculture. The PE capsule-type black-color digester is also attractive for increasing the temperature of the digester due to black body absorption. The production of gas during summer season might take a few days, whereas additional greenhouse effect during winter can raise the temperature by 10 degree C. Hence, this digester is more suitable for cooler regions where the Indian model is not successful. The design is modular in nature; therefore linking additional modules in series can increase the capacity of biogas

Effects of incorporating environmental cost and risk aversion on economic values of pig breeding goal traits.

Science.gov (United States)

Ali, B M; de Mey, Y; Bastiaansen, J W M; Oude Lansink, A G J M

2018-06-01

Economic values (EVs) of traits, accounting for environmental impacts and risk preferences of farmers, are required to design breeding goals that contribute to both economic and environmental sustainability. The objective of this study was to assess the effects of incorporating environmental costs and the risk preferences of farmers on the EVs of pig breeding goal traits. A breeding goal consisting of both sow efficiency and production traits was defined for a typical Brazilian farrow-to-finish pig farm with 1,500 productive sows. A mean-variance utility function was employed for deriving the EVs at finishing pig level assuming fixed slaughter weight. The inclusion of risk and risk aversion reduces the economic weights of sow efficiency traits (17%) while increasing the importance of production traits (7%). For a risk-neutral producer, inclusion of environmental cost reduces the economic importance of sow efficiency traits (3%) while increasing the importance of production traits (1%). Genetic changes of breeding goal traits by their genetic standard deviations reduce emissions of greenhouse gases, and excretions of nitrogen and phosphorus per finished pig by up to 6% while increasing farm profit. The estimated EVs could be used to improve selection criteria and thereby contribute to the sustainability of pig production systems. © 2018 The Authors. Journal of Animal Breeding and Genetics published by Blackwell Verlag GmbH.

Passive low-cost inkjet-printed smart skin sensor for structural health monitoring

KAUST Repository

Cook, Benjamin Stassen

2012-11-20

Monitoring fatigue cracking of large engineering structures is a costly and time-intensive process. The authors\\' present the first low-cost inkjet-printed patch antenna sensor that can passively detect crack formation, orientation and shape by means of resonant frequency shifts in the two resonant modes of the antenna. For the first time, the effect of non-linear crack shapes on the parallel and perpendicular resonant modes of a patch antenna is quantified with simulation and measurement. This study presents a step towards fully integrated, low-cost, conformal and environmentally friendly smart skins for real-time monitoring of large structures. © The Institution of Engineering and Technology 2012.

Bayesian cost-effectiveness analysis with the R package BCEA

CERN Document Server

Baio, Gianluca; Heath, Anna

2017-01-01

The book provides a description of the process of health economic evaluation and modelling for cost-effectiveness analysis, particularly from the perspective of a Bayesian statistical approach. Some relevant theory and introductory concepts are presented using practical examples and two running case studies. The book also describes in detail how to perform health economic evaluations using the R package BCEA (Bayesian Cost-Effectiveness Analysis). BCEA can be used to post-process the results of a Bayesian cost-effectiveness model and perform advanced analyses producing standardised and highly customisable outputs. It presents all the features of the package, including its many functions and their practical application, as well as its user-friendly web interface. The book is a valuable resource for statisticians and practitioners working in the field of health economics wanting to simplify and standardise their workflow, for example in the preparation of dossiers in support of marketing authorisation, or acade...

The environmental monitoring of Cultural Heritage through Low Cost strategies: The frescoes of the crypt of St. Francesco d'Assisi's, Irsina (Basilicata, Southern Italy)

Science.gov (United States)

Sileo, Maria; Gizzi, Fabrizio; Masini, Nicola

2015-04-01

One of the main tools of assessment and diagnosis used to define appropriate strategies for the preservation of cultural heritage is the environmental monitoring. To achieve an environmental monitoring are needed high costs of purchase and maintenance, high costs of instrumental and for the management of the plants and processing of results. These costs imply that the technologies for environmental monitoring are not as common but their use is limited to the study very famous monuments or sites. To extend the use and dissemination of such technologies to a greater number of monuments, through the project Pro_Cult (Advanced methodological approaches and technologies for Protection and Security of Cultural Heritage) a research aimed at testing low cost technologies has been performed. The aim of the research is to develop low cost monitoring systems, assessing their effectiveness in a comparative way with commercial high cost ones. To this aim an environmental monitoring system using the Arduino system was designed and developed. It is an electronics prototyping platform based on open-source hardware and software flexible and user friendly. This system is connected to sensors for the detection of environmental parameters of non high purchase cost but with respect to the medium potential detection sensors accurately. This low cost system was tested in the framework of a microclimate monitoring project of the crypt of St. Francis of Assisi in Irsina (Southern Italy) enriched by a precious cycle of medieval frescoes. The aim of this research was to compare two monitoring systems, the first, at low cost, using Arduino system, and the second, a standard commercial product for a full yearly cycle and assess the reliability and the results obtained by the two systems. This paper shows the results of the comparative analysis of an entire monitoring yearly cycle in relation to the problems of degradation affecting the paintings of medieval crypt [1]. The obtained results

Comment 2 on workshop in economics - issues in benefit-cost analysis: Amplification channels and discounting long-term environmental damages

International Nuclear Information System (INIS)

Hanson, D.A.

1992-01-01

Many environmental problems have long-term effects. Acid rain has long-term effects on soils, forests, and exposed materials. Global climate change has even longer-term effects. This difference in timing - between the near-term cost of environmental protection and the long-term environmental effects - makes it difficult to conduct a cost-benefit analysis of any program designed to abate environmental damages. The rate at which to discount long-term environmental damages becomes a key question in comparisons of benefits and costs. This comment points out an important facet of the discounting issue. The discount rate for calculating the present value of future environmental benefits may be much lower than the rate of return on investment. Cost-benefit analysis is a framework in which to evaluate policies and decisions. Because global climate change is a complex problem, extensions of cost-benefit theory can be expected to add additional insights, particularly in the following areas: distinguishing distributional effects among nations, over time, and among generations; determining the rate of discount that is appropriate for long-term environmental damages and separating risk aspects from the rate of discount; and assessing amplification effects when policies involve large expenditures relative to the economy or when affected sectors are significant sectors of the economy

Bio-based fillers for environmentally friendly composites

CSIR Research Space (South Africa)

Mokhothu, Thabang H

2017-03-01

Full Text Available The use of bio-based fillers as alternative replacement for synthetic fillers has been dictated by increasing ecological concerns as well as depleting petroleum resources. The other aspect is a growing need for eco-friendly, renewable...

The Cost-Effectiveness of Alternative Instruments for Environmental Protection in a Second-Best Setting

OpenAIRE

Lawrence H. Goulder; Ian W. H. Parry; Roberton C. Williams III; Dallas Burtraw

1998-01-01

This paper employs analytical and numerical general equilibrium models to examine the costs of achieving pollution reductions under a range of environmental policy instruments in a second-best setting with pre-existing factor taxes. We compare the costs and overall efficiency impacts of emissions taxes, emissions quotas, fuels taxes, performance standards, and mandated technologies, and explore how costs change with the magnitude of pre-existing taxes and the extent of pollution abatement. We...

Promoting energy-saving and environmentally friendly generation dispatching model in China: Phase development and case studies

DEFF Research Database (Denmark)

Ding, Yi; Yang, Hongliang

2013-01-01

Energy saving and environmental protection are important conditions for the sustainable development of Chinese economy. However current widely used generation scheduling model based on predefined production quota and tariff results in heavy energy consumption and severe environment pollution. From...... 2007, as concerns over energy shortage and environmental pollution, the Chinese authorities introduced the implementation of energy-saving generation dispatching model, which is an important approach to facilitating energy-saving and reduction of pollutant emission. The objective of implementing energy......-saving generation dispatching model is to prioritize the use of renewable energy resources and new power plants with high efficiency without compromising power system security and reliability. This paper analyzes the necessity and feasibility of implementing energy-efficient and environmentally friendly generation...

BENEFIT-COST ANALYSIS IN U.S. ENVIRONMENTAL REGULATORY DECISIONS

OpenAIRE

Easter, K. William; Archibald, Sandra O.

1998-01-01

As the number and cost of environmental regulations have increased over the last thirty years, the regulated community, taxpayers, and policy makers have begun to demand that the benefits of regulations justify their costs. The use of benefit-cost analysis as an integral part of developing new regulations is increasing and the demands and expectations being placed on the method have expanded. Although benefit-cost analysis is expected to play an even greater role in environmental decision mak...

Metal-free supercapacitor with aqueous electrolyte and low-cost carbon materials

Science.gov (United States)

Blomquist, Nicklas; Wells, Thomas; Andres, Britta; Bäckström, Joakim; Forsberg, Sven; Olin, Håkan

2017-01-01

Electric double-layer capacitors (EDLCs) or supercapacitors (SCs) are fast energy storage devices with high pulse efficiency and superior cyclability, which makes them useful in various applications including electronics, vehicles and grids. Aqueous SCs are considered to be more environmentally friendly than those based on organic electrolytes. Because of the corrosive nature of the aqueous environment, however, expensive electrochemically stable materials are needed for the current collectors and electrodes in aqueous SCs. This results in high costs for a given energy-storage capacity. To address this, we developed a novel low-cost aqueous SC using graphite foil as the current collector and a mix of graphene, nanographite, simple water-purification carbons and nanocellulose as electrodes. The electrodes were coated directly onto the graphite foil by using casting frames and the SCs were assembled in a pouch cell design. With this approach, we achieved a material cost reduction of greater than 90% while maintaining approximately one-half of the specific capacitance of a commercial unit, thus demonstrating that the proposed SC can be an environmentally friendly, low-cost alternative to conventional SCs.

Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

Directory of Open Access Journals (Sweden)

Maarten Messagie

2013-11-01

Full Text Available Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventional petrol and diesel vehicles. The assessments are done from a life cycle perspective. The effect on human health, resources and ecosystems is considered when calculating the environmental impact. The total cost of ownership (TCO model includes the purchase price, registration and road taxes, insurance, fuel or electricity cost, maintenance, tires replacement, technical control, battery leasing and battery replacement. In the presented analysis different vehicle technologies and fuels are compared (petrol, diesel, hybrid electric vehicles (HEVs, battery electric vehicles (BEVs and plug-in hybrid electric vehicles (PHEVs on their level of environmental impact and cost per kilometer. The analysis shows a lower environmental impact for electric vehicles. However, electric vehicles have a higher total cost of ownership compared to conventional vehicles, even though the fuel operating costs are significantly lower. The purchase cost of electric vehicles is highly linked to the size of the battery pack, and not to the size of the electric vehicle. This explains the relative high cost for the electric city cars and the comparable cost for the medium and premium cars.

[Does self-worth mediate the effects of socio-environmental experiences on depression among fifth and sixth grade students?].

Science.gov (United States)

Nishino, Yasuyo; Kobayashi, Sachiko; Kitagawa, Tomoko

2009-08-01

This study investigated self-worth as a mediator between socio-environmental experiences and depression. A sample of 255 fifth and sixth grade students completed self-report questionnaires assessing self-worth, depression, and socio-environmental experiences of social support and stressors. Data for both males and females showed a direct effect of "friend support" on depression. However, for males, but not females, self-worth also mediated the influence of "friend support" on depression.

Environmentally friendly procedure based on VA-MSPD for the determination of booster biocides in fish tissue.

Science.gov (United States)

Vieira, Augusto A; Caldas, Sergiane S; Escarrone, Ana Laura Venquiaruti; Arias, Jean Lucas de Oliveira; Primel, Ednei Gilberto

2018-03-01

Booster biocides have been widely applied to ships and other submerged structures. These compounds can be released into the marine environment as the result of vessel hull leaching and may remain in different environmental compartments. This study aimed at introducing an environmentally friendly procedure for the extraction of irgarol and diuron from fish samples by vortex-assisted matrix solid phase dispersion (VA-MSPD) with detection by liquid chromatography tandem mass spectrometry. Different types of solid supports and solvents were evaluated. The best results were found when 0.5g mussel shell, 0.5g sodium sulfate and 5mL ethanol were used. Analytical recoveries ranged from 81 to 110%, with RSD below 10%, whereas the matrix effect was between -17 and 1% (for all samples under study). LOQ values of irgarol and diuron were 5 and 50ngg -1 , respectively. The method under investigation proved to be a promising alternative to controlling contamination of fish by booster biocides, with low consumption of biodegradable reagents. Copyright © 2017 Elsevier Ltd. All rights reserved.

Indian jujuba seed powder as an eco-friendly and a low-cost biosorbent for removal of acid blue 25 from aqueous solution.

Science.gov (United States)

Krishna, L Sivarama; Reddy, A Sreenath; Zuhairi, W Y Wan; Taha, M R; Reddy, A Varada

2014-01-01

Indian jujuba seed powder (IJSP) has been investigated as a low-cost and an eco-friendly biosorbent, prepared for the removal of Acid Blue 25 (AB25) from aqueous solution. The prepared biomaterial was characterized by using FTIR and scanning electron microscopic studies. The effect of operation variables, such as IJSP dosage, contact time, concentration, pH, and temperature on the removal of AB25 was investigated, using batch biosorption technique. Removal efficiency increased with increase of IJSP dosage but decreased with increase of temperature. The equilibrium data were analyzed by the Langmuir and the Freundlich isotherm models. The data fitted well with the Langmuir model with a maximum biosorption capacity of 54.95 mg g(-1). The pseudo-second-order kinetics was the best for the biosorption of AB25 by IJSP, with good correlation. Thermodynamic parameters such as standard free energy change (ΔG(0)), standard enthalpy changes (ΔH(0)), and standard entropy changes (ΔS(0)) were analyzed. The removal of AB25 from aqueous solution by IJSP was a spontaneous and exothermic adsorption process. The results suggest that IJSP is a potential low-cost and an eco-friendly biosorbent for the AB25 removal from synthetic AB25 wastewater.

Environmental benefits and social cost

DEFF Research Database (Denmark)

Henriksen, H.J.; Kjær, J.; Brüsh, W.

2007-01-01

There is a need for introducing interdisciplinary tools and approaches in water management for participatory integrated assessment of water protection costs and environmental benefits for different management scenarios. This is required for the Water Framework Directive. Bayesian belief networks...

It is a moral issue : The relationship between environmental self-identity, obligation-based intrinsic motivation and pro-environmental behaviour

NARCIS (Netherlands)

van der Werff, Ellen; Steg, Linda; Keizer, Kees

2013-01-01

In order to effectively mitigate climate change, people need to adopt environmentally-friendly actions. We argue that some people act in an environmentally-friendly manner without external incentives to do so, but rather because they are intrinsically motivated to do so. There is some initial

Nuclear power: an eco friendly energy source for sustainable development

International Nuclear Information System (INIS)

Obaidurrahman, K.; Singh, Om Pal

2009-01-01

When viewed from a large set of criteria such as abundance of energy resources, environmental impacts, low fuel inventory, quantum of waste generated and green house gas emissions, nuclear power can be considered as a large scale sustainable energy source. Among all energy sources, nuclear energy has perhaps the lowest impact on the environment, especially in relation to kilowatt-hr produced, because nuclear plants do not emit harmful gases and produce small quantity of waste. In other words, nuclear energy is the most environmental friendly electricity source. There are no significant adverse effects to water, land, habitat, species and air resources. The present paper discusses the sustainability and feasibility of nuclear power as an eco friendly energy source in the changing and challenging competitive power market. (author)

Estimating the environmental costs of electricity: an overview and review of the issues

International Nuclear Information System (INIS)

Freeman, A.M. III

1996-01-01

This paper provides an overview of the issues associated with environmental costing and the specific questions raised by the effort to measure the environmental costs of electricity. It focuses on three sets of issues. The first set is several conceptual issues in the valuation of environmental impacts in general. These issues are not unique to valuing the environmental impacts of electricity generation. However each of these issues has been highlighted in one way or another by the studies being discussed here. The second set of issues are specific to the design of studies of environmental effects of generating electricity. These issues are the selection of externalities for inclusion in the analysis, and whether and to what extent to include so called upstream and downstream impacts. The third set of issues involves policy implications of the results of the work that has been done to date. Factors considered include health effects of air emissions, damage to ecosystems, damage by CO 2 . 31 refs

Investigation of Environmental-friendly Technology for a Paint Industry Wastewater Plant in Turkey

Directory of Open Access Journals (Sweden)

Pelin YAPICIOĞLU

2018-02-01

Full Text Available Paint manufacturing process has several unfavorable aspects to the environment in Turkey. One of these impacts is wastewater treatment. Paint wastewater contains huge amounts of toxic chemical substances, bio refractory compounds, pigments and microorganisms. So, advanced treatment requirement is available to dispose of colour, microorganisms and chemical oxygen demand (COD. The high organic content of wastewater causes serious environmental challenges and contamination for the living organisms and the ecosystem in the receiver media unless it is treated adequately. In this context, the treatment process to be implemented should be preferred in such a way as to give the least damage to the environment. In this study, three treatment scenarios that contain electrocoagulation (Scenario-1, Fenton process (Scenario-2 and membrane distillation (Scenario-3 have been created for wastewater treatment facility of a paint industry in Turkey. For three scenarios, environmental impact assessment has been carried out with Fine-Kinney method. It is aimed to choose best environmental technology before investment. The evaluation results revealed that Scenario-2 has the less environmental impacts that total impact value is 556. Scenario-1 has the highest total impact value as 756, relatively. Total impact value related to Scenario-3 is 637. According to the evaluation results, Fenton process is the best environmental-friendly treatment technology for wastewater treatment of a paint industry in Turkey.

Eco-friendly plasmonic sensors: using the photothermal effect to prepare metal nanoparticle-containing test papers for highly sensitive colorimetric detection.

Science.gov (United States)

Tseng, Shao-Chin; Yu, Chen-Chieh; Wan, Dehui; Chen, Hsuen-Li; Wang, Lon Alex; Wu, Ming-Chung; Su, Wei-Fang; Han, Hsieh-Cheng; Chen, Li-Chyong

2012-06-05

Convenient, rapid, and accurate detection of chemical and biomolecules would be a great benefit to medical, pharmaceutical, and environmental sciences. Many chemical and biosensors based on metal nanoparticles (NPs) have been developed. However, as a result of the inconvenience and complexity of most of the current preparation techniques, surface plasmon-based test papers are not as common as, for example, litmus paper, which finds daily use. In this paper, we propose a convenient and practical technique, based on the photothermal effect, to fabricate the plasmonic test paper. This technique is superior to other reported methods for its rapid fabrication time (a few seconds), large-area throughput, selectivity in the positioning of the NPs, and the capability of preparing NP arrays in high density on various paper substrates. In addition to their low cost, portability, flexibility, and biodegradability, plasmonic test paper can be burned after detecting contagious biomolecules, making them safe and eco-friendly.

Cost-effective and simple solutions for environmental pollution problems by electrochemical methods

International Nuclear Information System (INIS)

Ahmed, R.

1997-01-01

Environmental pollution is a worldwide problem and has increased significantly with industrialization, urbanization and population growth and is effecting quality of our air, land and water resources. Pollutants include heavy metals, organic toxic and reactive compounds and toxic gases. Major problems in environmental pollution are monitoring and remediation. Now pollutants include such wide range of elements, compounds and gases and normally one needs a whole range of costly analytical techniques to analyse all the pollutants which only very few institutes can afford to purchased. Equipment for electro analytical techniques are much cheaper than most of the other analytical techniques and are also sensitive and accurate for the analysis of nearly the whole range of pollutants including heavy metal. organic reactive compounds, inorganic elements and compounds and toxic gases. application of electrochemical methods for the analysis of different pollutants are reviewed. after monitoring, remediation in the most important aspect of environmental pollution control. Best way could be to treat the pollutants from different industries in such a way that either these are removed from the waste or converted in to non-toxic compounds before their release into the environment. Among all the other treatment methods, electrochemical methods of utilizing the electron as a clean chemical regent are very attractive. Electrodes in electrochemical reactors are abundantly use for the removal and recycling of toxic metals like Cd, Cu, Ni, Pb, Cr and Zn from the industrial waste after electrodeposition. Electrochemical reactors are also being used for electro oxidation of cyanides and other toxic organic compounds into non-toxic species. Such reactors can, in principal, be applied to any environmental pollution problem where the pollutant can either be electro-reduced or oxidized. Different types of electrochemical reactors are discussed, with a view, of their envisaged used for

An environmental friendly animal waste disposal process with ammonia recovery and energy production: Experimental study and economic analysis.

Science.gov (United States)

Shen, Ye; Tan, Michelle Ting Ting; Chong, Clive; Xiao, Wende; Wang, Chi-Hwa

2017-10-01

Animal manure waste is considered as an environmental challenge especially in farming areas mainly because of gaseous emission and water pollution. Among all the pollutants emitted from manure waste, ammonia is of greatest concern as it could contribute to formation of aerosols in the air and could hardly be controlled by traditional disposal methods like landfill or composting. On the other hand, manure waste is also a renewable source for energy production. In this work, an environmental friendly animal waste disposal process with combined ammonia recovery and energy production was proposed and investigated both experimentally and economically. Lab-scale feasibility study results showed that 70% of ammonia in the manure waste could be converted to struvite as fertilizer, while solid manure waste was successfully gasified in a 10kW downdraft fixed-bed gasifier producing syngas with the higher heating value of 4.9MJ/(Nm 3 ). Based on experimental results, economic study for the system was carried out using a cost-benefit analysis to investigate the financial feasibility based on a Singapore case study. In addition, for comparison, schemes of gasification without ammonia removal and incineration were also studied for manure waste disposal. The results showed that the proposed gasification-based manure waste treatment process integrated with ammonia recovery was most financially viable. Copyright © 2017 Elsevier Ltd. All rights reserved.

Review comments on Environmental Analysis Cost Reduction Proposals (WIPP-DOE-136), July 1982

International Nuclear Information System (INIS)

Channell, J.K.

1982-11-01

The cost reduction proposals have the laudable goal of significantly reducing the total capital And operating cost connected with WIPP. Furthermore, since the proposed changes would reduce the size and operating rate of the project, they would be expected to have decreased environmental And socioeconomic impacts. However, some of these cost reduction proposals do decrease factors of safety in various components of the project or trade off one type of environmental detriment for another. The report does not contain sufficient detail to justify all of the conclusions reached; more discussion and quantitative information (including costs) is necessary in some cases. Also, there are places where the report is unclear or contradictory. Without a more detailed evaluation, EEG is unable to conclude that each of these cost reduction proposals either has a net environmental/health and safety benefit or a cost savings that justifies a net detriment. A revised Environmental Analysis (EA) should either include additional information or specifically reference backup documents where these conclusions have been justified. In addition, the EA needs to be revised to include the effect of the recently announced (11/18/82) decision by DOE to relocate the underground waste storage areas of the repository to the south

Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Malaysia and Vietnam; Kankyo chowagata sekitan riyo system kanosei chosa. Malaysia Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This survey arranged the status of coal utilization technology and the status of coal production, supply, etc. in Malaysia and Vietnam, examined/studied coal utilization systems in both countries, and finally assessed feasibility of introducing the environmentally friendly type coal utilization system. As a country of primary energy source which is abundant in crude oil, natural gas, hydroelectric power, coal, etc., Malaysia now depends on crude oil and natural gas for 80% of its energy, and places emphasis on exploration of natural gas and oil refining. In electric power and cement industries where coal is consumed, effectiveness and environmental issues in association with coal utilization are future subjects. In Vietnam, the north is abundant in hydroelectric power and anthracite, and the south in oil and gas resource, but the north and central districts are in a state of undevelopment. Coal is used for coal thermal power generation, cement industry, and residential/commercial fuel. In the future, effective coal utilization and environmental issues will be subjects. 16 refs., 38 figs., 75 tabs.

Partial analysis of the environmental costs generated by hotels in Hong Kong

Energy Technology Data Exchange (ETDEWEB)

Chan, W.W. [Hong Kong Polytechnic Univ., Hung Hom (China). School of Hotel and Tourism Management

2005-12-15

This paper investigates the environmental costs attributable to the various activities involved in operating a hotel such as energy usage, water consumption, and solid waste disposal. A control cost approach and a pro-rated model were used in environmental costing. A holistic analysis of the environmental costs was then made. It was found that, in the early 1990s, the environmental costs incurred in controlling air pollution was higher than for other types of pollution. However, the situation changed during the late 1990s as the government invested more in building large-scale sewage treatment systems and landfills. At present, the environmental costs attributable to water protection and solid waste management have been larger than the environmental costs of air pollution. This implies that hotel operators should place a greater focus on mitigating the pressure on the environment from the consumption of water and disposal of solid waste. Also based on the methodologies, recommendations on environmental accounting on three levels are made. (Author)

The environmental effect of subsidies for clean technologies

International Nuclear Information System (INIS)

De Vries, F.P.; Nentjes, A.

2001-01-01

Environmental subsidies for clean technology result in a larger diffusion of such technology. However, as a result emissions can increase in imperfect markets for products. When several companies compete each other with clean and dirty technologies, production and emission will rise because of price competition.This effect will be even larger in case subsidies are applied. Therefore, subsidies are not advisable for every market. In this article an evolutionary game theory has been used with respect to the diffusion of environment-friendly innovation of products and the role of environmental policy instruments (in particular subsidies). 7 refs

Constraints in the Adoption of Eco Friendly Conservation Practices

Directory of Open Access Journals (Sweden)

L. Murali Krishnan

2016-05-01

Insect pest and diseases management, Lack of awareness of agro environmental problems and farmer’s attitude towards the Eco Friendly Conservation Practices are the major constraints in the adoption of Eco Friendly Conservation Practices.The study suggests educational, extension & training strategies for fostering the adopted of ECO friendly Conservation Practices.

Polystyrene Supported Al(OTf)3: an Environmentally Friendly Heterogeneous Catalyst for Friedel-Crafts Acylation of Aromatic Compounds

International Nuclear Information System (INIS)

Boroujeni, Kaveh Parvanak

2010-01-01

Stable and non-hygroscopic polystyrene supported aluminium triflate (Ps-Al(OTf) 3 ), which is prepared easily from cheap and commercially available compounds was found to be an environmentally friendly heterogeneous catalyst for Friedel-Crafts acylation of arenes using acid chlorides in the absence of solvent under mild reaction conditions. The catalyst can be reused up to five times after simple washing with dichloromethane

Demonstrating the cost effectiveness of an expert occupational and environmental health nurse: application of AAOHN's success tools. American Association of Occupational Health Nurses.

Science.gov (United States)

Morris, J A; Smith, P S

2001-12-01

According to DiBenedetto, "Occupational health nurses enhance and maximize the health, safety, and productivity of the domestic and global work force" (1999b). This project clearly defined the multiple roles and activities provided by an occupational and environmental health nurse and assistant, supported by a part time contract occupational health nurse. A well defined estimate of the personnel costs for each of these roles is helpful both in demonstrating current value and in future strategic planning for this department. The model highlighted both successes and a business cost savings opportunity for integrated disability management. The AAOHN's Success Tools (1998) were invaluable in launching the development of this cost effectiveness model. The three methods were selected from several tools of varying complexities offered. Collecting available data to develop these metrics required internal consultation with finance, human resources, and risk management, as well as communication with external health, safety, and environmental providers in the community. Benchmarks, surveys, and performance indicators can be found readily in the literature and online. The primary motivation for occupational and environmental health nurses to develop cost effectiveness analyses is to demonstrate the value and worth of their programs and services. However, it can be equally important to identify which services are not cost effective so knowledge and skills may be used in ways that continue to provide value to employers (AAOHN, 1996). As evidence based health care challenges the occupational health community to demonstrate business rationale and financial return on investment, occupational and environmental health nurses must meet that challenge if they are to define their preferred future (DiBenedetto, 2000).

System-wide impacts of environmental cost factors

International Nuclear Information System (INIS)

Rogers, M.; Kennedy, T.; Finnell, J.; Hoelscher, J.

1992-01-01

This paper presents a continuum of approaches to considering environmental externalities in the utility resource selection process. While photovoltaic (PV) technologies can play a role in reducing emissions, they are generally not cost-competitive with conventional technologies, even when cost estimates for environmental damages are introduced. Several approaches are explored to determine whether PV becomes more competitive when emission reduction strategies are considered on a regional basis. Finally, preliminary analysis was performed with the Midas utility planning model to develop emission credits based on PV's ability to displace emissions on a net system basis

Water-Soluble Polymers with Strong Photoluminescence through an Eco-Friendly and Low-Cost Route.

Science.gov (United States)

Guo, Zhaoyan; Ru, Yue; Song, Wenbo; Liu, Zhenjie; Zhang, Xiaohong; Qiao, Jinliang

2017-07-01

Photoluminescence (PL) of nonconjugated polymers brings a favorable opportunity for low-cost and nontoxic luminescent materials, while most of them still exhibit relatively weak emission. Strong PL from poly[(maleic anhydride)-alt-(vinyl acetate)] (PMV) from low-cost monomer has been found in organic solvents, yet the necessity of noxious solvents would hinder its practical applications. Herein, through a novel, eco-friendly, and one-step route, PMV-derived PL polymers can be fabricated with the highest quantum yield of 87% among water-soluble nonconjugated PL polymers ever reported. These PMV-derived polymers emit strong blue emission in both solutions and solids, and can be transformed into red-emission agents easily. These PL polymers exhibit application potentials in light-conversion agricultural films. It is assumed that this work not only puts forward a convenient preparation routine for nonconjugated polymers with high PL, but also provides an industrial application possibility for them. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An eco-friendly, quick and cost-effective method for the quantification of acrylamide in cereal-based baby foods.

Science.gov (United States)

Cengiz, Mehmet Fatih; Gündüz, Cennet Pelin Boyacı

2014-09-01

The presence of acrylamide in cereal-based baby foods is a matter of great concern owing to its possible health effects. Derivatization followed by gas chromatography/mass spectrometry (GC/MS) is one of the most common methods to quantify acrylamide. However, it requires the use of toxic chemicals and is time-consuming. The aim of this study was to develop an eco-friendly, rapid and inexpensive method for the determination of acrylamide in cereal-based baby foods. The method involves defatting with n-hexane, extraction into water, precipitation of proteins, bromination, extraction into ethyl acetate and injection into a GC/MS system. The effects of defatting, precipitation, treatment with triethylamine, addition of internal standard and column selection were reviewed. A flow chart for acrylamide analysis was prepared. To evaluate the applicability of the method, 62 different cereal-based baby foods were analyzed. The levels of acrylamide ranged from not detected (below the limit of detection) to 660 µg kg(-1). The method is more eco-friendly and less expensive because it consumes very little solvent relative to other methods using bromine solutions and ethyl acetate. In addition, sample pre-treatment requires no solid phase extraction or concentration steps. The method is recommended for the determination of trace acrylamide in complex cereal-based baby food products. © 2014 Society of Chemical Industry.

The Imposition Environmental Cost-Loading Of Companies Investing In Coal Mining

Directory of Open Access Journals (Sweden)

Tomi Risman

2015-08-01

Full Text Available The instrument of environment is an effort to prevent environmental problems caused by mining activities both in forms and its nature. The aims of the study are to analyze and understanding the essence of environment cost-loading in order to restore the environment from coal mining activities both when mining taken place and post-mining. The type of research used is a normative-legal research. This research was conducted in the province of South Kalimantan with the consideration that the South Kalimantan is one of the largest coal-producing Provinces in Indonesia. In addition the environment cost-loading for investor in coal mining have the same properties in all coal mining sites in Indonesia. The results of the research indicated that the imposition and environment-cost in investment activity in the field of coal mining can be seen from the two approaches i.e the economic and legal approach. Economic approach is an approach that emphasizes the economic benefits gained by the owner of activities when they comply with the environmental requirements stipulated by laws and environmental regulations. Realizing the importance of environmental cost-loading for the company that manages the coal mining especially for the utilization of prevention of pollution caused by coal mining activity it is necessary to develop an institutional guarantee of recovery from the effects of pollution by establishing fund insurance for environmental restoration as a result of pollution. Thus in order to optimize the implementation of guarantee fund for environmental restoration are specifically utilized for post-mining reclamation then granting the status of Clean and Clear C amp C for coal mining investor must be presupposing the proof of guarantee fund has been placed for environmental restoration post-mining.

Effective recovery of poly-β-hydroxybutyrate (PHB) biopolymer from Cupriavidus necator using a novel and environmentally friendly solvent system.

Science.gov (United States)

Fei, Tao; Cazeneuve, Stacy; Wen, Zhiyou; Wu, Lei; Wang, Tong

2016-05-01

This work demonstrates a significant advance in bioprocessing for a high-melting lipid polymer. A novel and environmental friendly solvent mixture, acetone/ethanol/propylene carbonate (A/E/P, 1:1:1 v/v/v) was identified for extracting poly-hydroxybutyrate (PHB), a high-value biopolymer, from Cupriavidus necator. A set of solubility curves of PHB in various solvents was established. PHB recovery of 85% and purity of 92% were obtained from defatted dry biomass (DDB) using A/E/P. This solvent mixture is compatible with water, and from non-defatted wet biomass, PHB recovery of 83% and purity of 90% were achieved. Water and hexane were evaluated as anti-solvents to assist PHB precipitation, and hexane improved recovery of PHB from biomass to 92% and the purity to 93%. A scale-up extraction and separation reactor was designed, built and successfully tested. Properties of PHB recovered were not significantly affected by the extraction solvent and conditions, as shown by average molecular weight (1.4 × 10(6) ) and melting point (175.2°C) not being different from PHB extracted using chloroform. Therefore, this biorenewable solvent system was effective and versatile for extracting PHB biopolymers. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:678-685, 2016. © 2016 American Institute of Chemical Engineers.

Life cycle assessment of mobility options using wood based fuels--comparison of selected environmental effects and costs.

Science.gov (United States)

Weinberg, Jana; Kaltschmitt, Martin

2013-12-01

An environmental assessment and a cost analysis were conducted for mobility options using electricity, hydrogen, ethanol, Fischer-Tropsch diesel and methane derived from wood. Therefore, the overall life cycle with regard to greenhouse gas emissions, acidifying emissions and fossil energy demand as well as costs is analysed. The investigation is carried out for mobility options in 2010 and gives an outlook to the year 2030. Results show that methane utilization in the car is beneficial with regard to environmental impacts (e.g. 58.5 g CO2-eq./km) and costs (23.1 €-ct./km) in 2010, especially in comparison to hydrogen usage (132.4 g CO2-eq./km and 63.9 €-ct./km). The electric vehicle construction has high environmental impacts and costs compared to conventional vehicles today, but with technical improvements and further market penetration, battery electric vehicles can reach the level of concepts with combustion engines in future applications (e.g. cost decrease from 38.7 to 23.4 €-ct./km). Copyright © 2013 Elsevier Ltd. All rights reserved.

A novel, environmentally friendly sodium lauryl ether sulfate-, cocamidopropyl betaine-, cocamide monoethanolamine-containing buffer for MEKC on microfluidic devices.

Science.gov (United States)

Hoeman, Kurt W; Culbertson, Christopher T

2008-12-01

A new buffer has been developed for fast, high-efficiency separations of amino acids by MEKC. This buffer was more environmentally friendly than the most commonly used surfactant-containing buffers for MEKC separations. It used a commercially available dishwashing soap by Seventh Generation (Burlington, VT, USA), which contained three micelle-forming agents. The mixed micelles were composed of sodium lauryl ether sulfate (anionic), cocamidopropyl betaine (zwitterionic), and cocamide monoethanolamine (non-ionic). The optimized buffer contained 5.0% w/w Seventh Generation Free & Clear dishwashing soap, 10 mM sodium borate, and was completely void of organics. The lack of organics and the biodegradability of the surfactant molecules made this buffer more environmentally friendly than typical SDS-containing buffers. This new buffer also had a different selectivity and provided faster separations with higher separation efficiencies than SDS-based buffers. Fast separations of BODIPY FL labeled amino acids yielded peaks with separation efficiencies greater than 100,000 in less than 20 s.

Approaching Environmental Cleanup Costs Liability Through Insurance Principles

National Research Council Canada - National Science Library

Corbin, Michael A

1994-01-01

.... Applying insurance industry principles to environmental cleanup costs liability will provide a firm foundation to reduce the risk of loss to the taxpayer, reduce cleanup costs, and stimulate private...

THE IMPACT OF ENVIRONMENTALLY FRIENDLY POSTHARVEST TREATMENTS ON THE ANTIOXIDANT ACTIVITY OF STRAWBERRY FRUITS DURING STORAGE

Directory of Open Access Journals (Sweden)

Ivna Štolfa

2014-12-01

Full Text Available Proper postharvest storage is an effective way to maintain the quality and nutritional values of fruits. The aim of this study was to determine how environmentally friendly postharvest treatments with salicylic acid solution, colloidal silver solution and ozone, affect the antioxidant activity of strawberry fruits (Fragaria x ananassa Duch. cv. Albion during 7 days of storage at 4°C. The content of ascorbic acid, total phenols and antioxidant activity of strawberry fruits were determined spec-trophotometrically. After 7 days of storage in strawberry fruits treated with all three treatments separately, the contents of ascorbic acid were higher than in the control fruits, supporting the usefulness of these treatments for preserving fruit quality and nutritional value during storage. The treatment with salicylic acid solution showed the most beneficial effect during storage causing a significant increase in the content of ascorbic acid, phenols and antioxidant activity at the end of the storage period.

Remediation of lead and cadmium from simulated groundwater in loess region in northwestern China using permeable reactive barrier filled with environmentally friendly mixed adsorbents.

Science.gov (United States)

Fan, Chunhui; Gao, Yalin; Zhang, Yingchao; Dong, Wanqing; Lai, Miao

2018-01-01

Permeable reactive barrier (PRB) is potentially effective for groundwater remediation, especially using environmentally friendly mixed fillers in representative areas, such as semi-arid loess region in northwestern China. The mixed materials, including corn straw (agricultural wastes), fly ash (industrial wastes), zeolite synthesized from fly ash (reutilized products), and iron-manganese nodule derived from loess (materials with regional characteristics) in northwestern China, were chosen as PRB media to reduce the contents of lead and cadmium in simulated groundwater. A series of lab-scale column experiments were investigated, and the response surface methodology (RSM) was used to optimize the working process; Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) were applied to further reveal the reaction mechanism. It shows that the purification efficiencies are more acceptable when the concentrations of lead and cadmium are approximately 7 and 0.7 mg/L, respectively, at 25 °C in weakly acidic solution, and functional groups of -OH and C=C play an important role for contaminants removal. The mixed adsorbents used are effective to remove lead and cadmium in groundwater. This is the first report on the removal of lead and cadmium from groundwater in loess region in northwestern China using PRB filled with environmentally friendly mixed adsorbents.

Biosynthesis of planet friendly bioplastics using renewable carbon source.

Science.gov (United States)

Jain, Roopesh; Tiwari, Archana

2015-01-01

Plastics are uniquely flexible materials that offer considerable benefits as a simple packing to complex engineering material. Traditional synthetic polymers (often called plastics), such as polypropylene and polyethylene have been derived from non-renewable petrochemicals and known to cause environmental concerns due to their non-biodegradable nature. The enormous use of petroleum-based plastic compounds emphasized a need for sustainable alternatives derived from renewable resources. Bioplastics have attracted widespread attention, as eco-friendly and eco-tolerable alternative. But they have got certain limitations as well, such as high cost of production and unsatisfactory mechanical properties. In this study we have found agriculture waste (AW) as low-cost and renewable substrate for the production of bioplastics in bacterial fermentation. Improvement in tensile properties of produced bioplastic film has also been documented upon blending with Cellulose Acetate Butyrate (CAB).

Priority Setting, Cost-Effectiveness, and the Affordable Care Act.

Science.gov (United States)

Persad, Govind

2015-01-01

The Affordable Care Act (ACA) may be the most important health law statute in American history, yet much of the most prominent legal scholarship examining it has focused on the merits of the court challenges it has faced rather than delving into the details of its priority-setting provisions. In addition to providing an overview of the ACA's provisions concerning priority setting and their developing interpretations, this Article attempts to defend three substantive propositions. First, I argue that the ACA is neither uniformly hostile nor uniformly friendly to efforts to set priorities in ways that promote cost and quality. Second, I argue that the ACA does not take a single, unified approach to priority setting; rather, its guidance varies depending on the aspect of the healthcare system at issue (Patient Centered Outcomes Research Institute, Medicare, essential health benefits) and the factors being excluded from priority setting (age, disability, life expectancy). Third, I argue that cost-effectiveness can be achieved within the ACA's constraints, but that doing so will require adopting new approaches to cost-effectiveness and priority setting. By limiting the use of standard cost-effectiveness analysis, the ACA makes the need for workable rivals to cost-effectiveness analysis a pressing practical concern rather than a mere theoretical worry.

Environmentally-friendly lithium recycling from a spent organic li-ion battery.

Science.gov (United States)

Renault, Stéven; Brandell, Daniel; Edström, Kristina

2014-10-01

A simple and straightforward method using non-polluting solvents and a single thermal treatment step at moderate temperature was investigated as an environmentally-friendly process to recycle lithium from organic electrode materials for secondary lithium batteries. This method, highly dependent on the choice of electrolyte, gives up to 99% of sustained capacity for the recycled materials used in a second life-cycle battery when compared with the original. The best results were obtained using a dimethyl carbonate/lithium bis(trifluoromethane sulfonyl) imide electrolyte that does not decompose in presence of water. The process implies a thermal decomposition step at a moderate temperature of the extracted organic material into lithium carbonate, which is then used as a lithiation agent for the preparation of fresh electrode material without loss of lithium. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Cost-effectiveness of food, supplement and environmental interventions to address malnutrition in residential aged care: a systematic review.

Science.gov (United States)

Hugo, Cherie; Isenring, Elisabeth; Miller, Michelle; Marshall, Skye

2018-05-01

observational studies have shown that nutritional strategies to manage malnutrition may be cost-effective in aged care; but more robust economic data is needed to support and encourage translation to practice. Therefore, the aim of this systematic review is to compare the cost-effectiveness of implementing nutrition interventions targeting malnutrition in aged care homes versus usual care. residential aged care homes. systematic literature review of studies published between January 2000 and August 2017 across 10 electronic databases. Cochrane Risk of Bias tool and GRADE were used to evaluate the quality of the studies. eight included studies (3,098 studies initially screened) reported on 11 intervention groups, evaluating the effect of modifications to dining environment (n = 1), supplements (n = 5) and food-based interventions (n = 5). Interventions had a low cost of implementation (<£2.30/resident/day) and provided clinical improvement for a range of outcomes including weight, nutritional status and dietary intake. Supplements and food-based interventions further demonstrated a low cost per quality adjusted life year or unit of physical function improvement. GRADE assessment revealed the quality of the body of evidence that introducing malnutrition interventions, whether they be environmental, supplements or food-based, are cost-effective in aged care homes was low. this review suggests supplements and food-based nutrition interventions in the aged care setting are clinically effective, have a low cost of implementation and may be cost-effective at improving clinical outcomes associated with malnutrition. More studies using well-defined frameworks for economic analysis, stronger study designs with improved quality, along with validated malnutrition measures are needed to confirm and increase confidence with these findings.

Department of Energy Environmental Management cost infrastructure development program: Cost analysis requirements

International Nuclear Information System (INIS)

Custer, W.R. Jr.; Messick, C.D.

1996-01-01

This report was prepared to support development of the Department of Energy Environmental Management cost infrastructure -- a new capability to independently estimate and analyze costs. Currently, the cost data are reported according to a structure that blends level of effort tasks with product and process oriented tasks. Also. the budgetary inputs are developed from prior year funding authorizations and from contractor-developed parametric estimates that have been adjusted to planned funding levels or appropriations. Consequently, it is difficult for headquarters and field-level activities to use actual cost data and technical requirements to independently assess the costs generated and identify trends, potential cost savings from process improvements, and cost reduction strategies

Intermediate peer contexts and educational outcomes: Do the friends of students' friends matter?

Science.gov (United States)

Carbonaro, William; Workman, Joseph

2016-07-01

Sociologists of education have long been interested in the effects of peer relations on educational outcomes. Recent theory and research on adolescence suggest that peers on the boundaries of students' friendship networks may play an important role in shaping behaviors and educational outcomes. In this study, we examine the importance of a key "intermediate peer context" for students' outcomes: the friends of a student's friends. Our findings indicate both friends' and friends' friends' characteristics independently predict students' college expectations and their risk of dropping out of high school (although only friends' characteristics predict GPA). Our models suggest the magnitude of students' friends-of-friends' characteristics are at least as large their friends' characteristics. Together, the association between the peer context and students outcomes is considerably larger when accounting for both the characteristics of students' friends and the friends of their friends. Copyright © 2016 Elsevier Inc. All rights reserved.

Cost-effectiveness of trachoma control in seven world regions.

NARCIS (Netherlands)

Baltussen, R.M.P.M.; Sylla, M.; Frick, K.D.; Mariotti, S.P.

2005-01-01

BACKGROUND/AIMS: The fight against blinding trachoma is being addressed with an integrated strategy of surgery, antibiotics, hygiene promotion, and environmental improvement-the SAFE strategy, but its cost-effectiveness is largely unknown. This paper estimates the cost effectiveness of surgery and

Characterization of eco-friendly fluorescent nanoparticle-doped tracers for environmental sensing

International Nuclear Information System (INIS)

Tauro, Flavia; Rapiti, Emiliano; Al-Sharab, Jafar F.; Ubertini, Lucio; Grimaldi, Salvatore; Porfiri, Maurizio

2013-01-01

Particle tracers are extensively used in quantitative flow visualization and environmental sensing. In this paper, we provide a thorough characterization of the novel eco-friendly fluorescent particle tracers formulated in Tauro et al. (AIP Adv 3(3): 032108, 2013). The tracers are synthesized from natural beeswax and are functionalized by encapsulating nontoxic fluorophore nanoparticles in the beads’ matrix through an inexpensive thermal procedure. Visibility and durability studies are conducted through a wide array of techniques to investigate the tracers’ surface morphological microfeatures, crystal nature and size, chemical composition, fluorophore incorporation into the beeswax matrix, and fluorescence response under severe settings resembling exposure to natural environments. Our findings demonstrate that fluorescent nanoparticles ranging from 1.51 to 3.73 nm are homogeneously distributed in the superficial layer (12 nm) of the tracers. In addition, fluorescence emissions are observed up to 26 days of continuous exposure of the tracers to high energy radiation. To demonstrate the particles’ use in environmental flow sensing, a set of proof of concept outdoor tests are conducted, in which image analysis tools are utilized for detecting the fluorescent tracers. Experimental results suggest that fluorescent microparticles deployed in high flow-rate flows (2 m/s) and under direct sunlight can be sensed through commercially available cameras (frame rate set to 30 Hz)

Environmental degradation costs in electricity generation: The case of the Brazilian electrical matrix

International Nuclear Information System (INIS)

Alves, Laura Araujo; Uturbey, Wadaed

2010-01-01

The main purpose of this paper is to emphasize the importance of including environmental degradation costs in the long-term planning of the Brazilian electricity sector. To this aim, environmental external costs associated to both hydro-power and thermal-power electricity generation are investigated. Monetary valuation methodologies are applied and environmental degradation costs, expressed in per kWh of generated energy, are obtained for the main types of generation sources of the Brazilian electricity matrix. Both local pollution due to particulate matter emissions and global warming effects are assessed. A classification of the sources from the point of view of their impact on the environment is given. Degradation costs associated to the installed capacity expansion in the Brazilian electricity sector during the time horizon 2007-2016 are estimated. These resulting costs represent lower boundary damage estimates associated only with the energy to be generated during the period. Results indicate that local pollution caused by a small number of plants could be even more costly to society than global warming and, also, show the importance of considering not only unitary damage costs but the participation of each source on the generated energy during the time horizon, as a guide to planning and policy making.

Power generation scenarios for Nigeria: An environmental and cost assessment

International Nuclear Information System (INIS)

Gujba, H.; Mulugetta, Y.; Azapagic, A.

2011-01-01

Exploratory scenarios for the power sector in Nigeria are analysed in this paper using possible pathways within the Nigerian context and then compared against the Government's power expansion plan in the short to medium term. They include two fossil-fuel (FF and CCGT) and two sustainable-development-driven scenarios (SD1 and SD2). The results from the FF scenarios indicate this is the preferred outcome if the aim is to expand electricity access at the lowest capital costs. However, the annual costs and environmental impacts increase significantly as a consequence. The SD1 scenario, characterised by increased penetration of renewables, leads to a reduction of a wide range of environmental impacts while increasing the annual costs slightly. The SD2 scenario, also with an increased share of renewables, is preferred if the aim is to reduce GHG emissions; however, this comes at an increased annual cost. Both the SD1 and SD2 scenarios also show significant increases in the capital investment compared to the Government's plans. These results can be used to help inform future policy in the Nigerian electricity sector by showing explicitly the range of possible trade-offs between environmental impacts and economic costs both in the short and long terms. - Research Highlights: →The power sector in Nigeria is set to grow significantly in near future. →Power sector scenarios are constructed and studied using LCA and economic analysis methods and then compared against the Government's plans. →These include two fossil-fuel and two sustainable-development-driven scenarios. →The results explicitly show the trade-offs between environmental impacts and costs. →Following the fossil fuel paths will reduce capital costs but increase environmental impacts. The renewable energy paths will reduce some environmental impacts but increase the capital costs.

Realizing a facile and environmental-friendly fabrication of high-performance multi-crystalline silicon solar cells by employing ZnO nanostructures and an Al2O3 passivation layer

Science.gov (United States)

Chen, Hong-Yan; Lu, Hong-Liang; Sun, Long; Ren, Qing-Hua; Zhang, Hao; Ji, Xin-Ming; Liu, Wen-Jun; Ding, Shi-Jin; Yang, Xiao-Feng; Zhang, David Wei

2016-01-01

Nowadays, the multi-crystalline silicon (mc-Si) solar cells dominate the photovoltaic industry. However, the current acid etching method on mc-Si surface used by firms can hardly suppress the average reflectance value below 25% in the visible light spectrum. Meanwhile, the nitric acid and the hydrofluoric contained in the etching solution is both environmental unfriendly and highly toxic to human. Here, a mc-Si solar cell based on ZnO nanostructures and an Al2O3 spacer layer is demonstrated. The eco-friendly fabrication is realized by low temperature atomic layer deposition of Al2O3 layer as well as ZnO seed layer. Moreover, the ZnO nanostructures are prepared by nontoxic and low cost hydro-thermal growth process. Results show that the best passivation quality of the n+ -type mc-Si surface can be achieved by balancing the Si dangling bond saturation level and the negative charge concentration in the Al2O3 film. Moreover, the average reflectance on cell surface can be suppressed to 8.2% in 400–900 nm range by controlling the thickness of ZnO seed layer. With these two combined refinements, a maximum solar cell efficiency of 15.8% is obtained eventually. This work offer a facile way to realize the environmental friendly fabrication of high performance mc-Si solar cells. PMID:27924911

Conceptual design of cost-effective and environmentally-friendly configurations for fuel ethanol production from sugarcane by knowledge-based process synthesis.

Science.gov (United States)

Sánchez, Óscar J; Cardona, Carlos A

2012-01-01

In this work, the hierarchical decomposition methodology was used to conceptually design the production of fuel ethanol from sugarcane. The decomposition of the process into six levels of analysis was carried out. Several options of technological configurations were assessed in each level considering economic and environmental criteria. The most promising alternatives were chosen rejecting the ones with a least favorable performance. Aspen Plus was employed for simulation of each one of the technological configurations studied. Aspen Icarus was used for economic evaluation of each configuration, and WAR algorithm was utilized for calculation of the environmental criterion. The results obtained showed that the most suitable synthesized flowsheet involves the continuous cultivation of Zymomonas mobilis with cane juice as substrate and including cell recycling and the ethanol dehydration by molecular sieves. The proposed strategy demonstrated to be a powerful tool for conceptual design of biotechnological processes considering both techno-economic and environmental indicators. Copyright © 2011 Elsevier Ltd. All rights reserved.

Environmentally friendly polymer nanocomposites: types, processing and properties

CSIR Research Space (South Africa)

Sinha Ray, S

2013-07-01

Full Text Available In recent years, the development of eco-friendly polymeric materials with balanced properties has become a subject of research attention due to concerns with increasing global-warming, carbon-emission, and limited natural resources. Nano...

Performance Analysis of Solar Combined Ejector-Vapor Compression Cycle Using Environmental Friendly Refrigerants

Directory of Open Access Journals (Sweden)

A. B. Kasaeian

2013-04-01

Full Text Available In this study, a new model of a solar combined ejector-vapor compression refrigeration system has been considered. The system is equipped with an internal heat exchanger to enhance the performance of the cycle. The effects of working fluid and operating conditions on the system performance including COP, entrainment ratio (ω, compression ratio (rp and exergy efficiency were investigated. Some working fluids suggested are: R114, R141b, R123, R245fa, R600a, R365mfc, R1234ze(e and R1234ze(z. The results show that R114 and R1234ze(e yield the highest COP and exergy efficiency followed by R123, R245fa, R365mfc, R141b, R152a and R600a. It is noticed that the COP value of the new solar ejector-vapor compression refrigeration cycle is higher than that of the conventional ejector cycle with R1234ze(e for all operating conditions. This paper also demonstrates that R1234ze(e will be a suitable refrigerant in the solar combined ejector-vapor compression refrigeration system, due to its environmental friendly properties and better performance. ABSTRAK: Kajian ini menganalisa model baru sistem penyejukan mampatan gabungan ejektor-wap solar.Sistem ini dilengkapi dengan penukar haba dalaman untuk meningkatkan prestasi kitaran.Kesan bendalir bekerja dan keadaan operasi pada prestasi sistem termasuk COP, nisbah pemerangkapan (ω, nisbah mampatan (rp dan kecekapan eksergi telah disiasat.Beberapa bendalir bekerja yang dicadangkan adalah: R114, R141b, R123, R245fa, R600a, R365mfc, R1234ze(e dan R1234ze(z.Hasil kajian menunjukkan R114 dan R1234ze(e menghasilkan COP dan kecekapan eksergi tertinggi diikuti oleh R123, R245fa, R365mfc, R141b, R152a dan R600a.Didapati nilai COP kitaran penyejukan mampatan bagi ejektor-wap solar baru adalah lebih tinggi daripada kitaran ejektor konvensional dengan R1234ze(e bagi semua keadaan operasi.Kertas kerja ini juga menunjukkan bahawa R1234ze(e boleh menjadi penyejuk yang sesuai dalam sistem penyejukan mampatan gabungan ejektor

The environmentally friendly technology for bio fuel production

International Nuclear Information System (INIS)

Bekers, M.; Danilevics, A.; Guriniece, E.; Gulbis, V.

2003-01-01

Full text: Bio fuel production and use have been discussed this time in EC and in Latvia as alternative energy sources. The national resources allow producing liquid fuels - bio diesel and bi oethanol from rape seeds and grain correspondingly. Liquid bio fuels can be recommended especially for auto transport in big towns to reduce the pollution of air. A system for environmentally friendly production of bio fuel from agricultural raw materials has been developed, which permit a complex utilization of byproducts an wastes for obtaining of valuable food-stuffs and industrial products, providing the agricultural production requirements and supporting with local mineral fertilizers. Such a bio fuel production includes the agricultural and industrial productions in a united biotechnological system. Production objects of system interact: the products, by-products and wastes from one object are used as raw materials, auxiliary materials or heat carriers in other system's objects. This integrated agro-industrial production system would allow the production of feeds and chemical products, along with bio fuels. In this work, a model of a system for a conventional administrative rural region is presented, exemplified with the case of Latvia. The model is developed for three forms of bio fuel production, i.e. ethanol, bio diesel and biogas as local energy source. Bio diesel is produced using ethanol as transesterifying agent of rape-seed oil fatty acids. This bio diesel is a blend of rape-seed oil fatty acid ethyl esters (REE) and consists solely from renewable raw materials. The capacity of distillery of system is 40 million litters per year and bio diesel 35000 ton. Important for agriculture is protein reach press cakes the byproduct from bio diesel production (66000 t/y). This byproduct can be exported as well. Biogas reactors of system can be used for utilization of wastes from town if necessary. Recommended bio system occupates up to 150.000 ha of agriculture lands

Nitrous Oxide Abatement Coupled with Biopolymer Production As a Model GHG Biorefinery for Cost-Effective Climate Change Mitigation.

Science.gov (United States)

Frutos, Osvaldo D; Cortes, Irene; Cantera, Sara; Arnaiz, Esther; Lebrero, Raquel; Muñoz, Raúl

2017-06-06

N 2 O represents ∼6% of the global greenhouse gas emission inventory and the most important O 3 -depleting substance emitted in this 21st century. Despite its environmental relevance, little attention has been given to cost-effective and environmentally friendly N 2 O abatement methods. Here we examined, the potential of a bubble column (BCR) and an internal loop airlift (ALR) bioreactors of 2.3 L for the abatement of N 2 O from a nitric acid plant emission. The process was based on the biological reduction of N 2 O by Paracoccus denitrificans using methanol as a carbon/electron source. Two nitrogen limiting strategies were also tested for the coproduction of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) coupled with N 2 O reduction. High N 2 O removal efficiencies (REs) (≈87%) together with a low PHBV cell accumulation were observed in both bioreactors in excess of nitrogen. However, PHBV contents of 38-64% were recorded under N limiting conditions along with N 2 O-REs of ≈57% and ≈84% in the ALR and BCR, respectively. Fluorescence in situ hybridization analyses showed that P. denitrificans was dominant (>50%) after 6 months of experimentation. The successful abatement of N 2 O concomitant with PHBV accumulation confirmed the potential of integrating biorefinery concepts into biological gas treatment for a cost-effective GHG mitigation.

Natural gas: an environmental-friendly solution?

International Nuclear Information System (INIS)

Vermeire, J.

1994-01-01

Since 1970, the portion of natural gas in energy consumption in Western-Europe has grown by 6 percent per year on the average. About 20 percent of the energy demand in Western-Europe is now covered by natural gas. It is forecasted that this growth will continue at a rate of 2 percent per year until 2010. The natural gas consumption will increase from 325 billion cubic metres in 1993 to 450 billion cubic metres per year in 2010. For the coming 10 to 15 years, the natural gas demand is covered by long-term contracts with gas producing countries. From 2010 on, additional contracts, covering 70 to 120 billion cubic metres per year are required. A shift in geographic distribution of countries from which natural gas will be imported by Western-European countries is expected, which implies high investments and additional costs for transport and distribution of natural gas. Due to its qualities with respect to environmental impact, yield, availability, and advanced technology, natural gas is the energy vector of the 21 first century. (A.S.)

Incentives for development and application of environmentally friendly biotechnological products and processes; Anreize fuer die Entwicklung und Anwendung umweltfreundlicher biotechnischer Produkte und Verfahren

Energy Technology Data Exchange (ETDEWEB)

Rhein, Hans-Bernhard; Endler, Katharina [Umweltkanzlei Dr. Rhein, Sarstedt (Germany); Ulber, Roland; Muffler, Kai; Mueller, Felix [Technische Univ. Kaiserslautern (Germany)

2011-01-15

Studies assign a tremendous growth potential related to biotechnology. However, the predicted proportion of biotechnological manufactured products in the chemical industry for the year 2010 by 20 % will more likely remain by today's 5 %. The study deals with the question why biotechnological products are currently established at the market in the obvious slow way. Therefore, the current constraints and existing respectively new incentive instruments referring to the white (industrial) biotechnology are analyzed to focus on the promotion of the development and application of environmentally friendly biotechnology products and methods. In addition to a search concerning environmental relevance and further development of white biotechnology, the postulated constraints and incentives as well as new promotions are discussed with the help of expert interviews. On the basis of a preliminary study - after further discussion with experts - concrete proposals on improvements related to an ongoing establishment of biotechnology will be derived. Based on case studies (2nd generation biofuels, polyhydroxybutyrate as biopolymer and phytase as an animal feed additive), the practical effects and specific conditions to incentives, from the perspective of biotechnological processes and environmentally friendly products are investigated. Overall, about 40 activities were recommended, which could be assigned to areas of direct government incentives (tax policy/subsidies, subsidies, education and research policy, basic political conditions, government demand and information policy/consumer intelligence) as well as non-governmental incentives (knowledge transfer and cooperation, organisation-related policy, capital market financing). (orig.)

Incentives for development and application of environmentally friendly biotechnological products and processes; Anreize fuer die Entwicklung und Anwendung umweltfreundlicher biotechnischer Produkte und Verfahren

Energy Technology Data Exchange (ETDEWEB)

Rhein, Hans-Bernhard; Endler, Katharina [Umweltkanzlei Dr. Rhein, Sarstedt (Germany); Ulber, Roland; Muffler, Kai; Mueller, Felix [Technische Univ. Kaiserslautern (Germany)

2011-01-15

Studies assign a tremendous growth potential related to biotechnology. However, the predicted proportion of biotechnological manufactured products in the chemical industry for the year 2010 by 20 % will more likely remain by today's 5 %. The study deals with the question why biotechnological products are currently established at the market in the obvious slow way. Therefore, the current constraints and existing respectively new incentive instruments referring to the white (industrial) biotechnology are analyzed to focus on the promotion of the development and application of environmentally friendly biotechnology products and methods. In addition to a search concerning environmental relevance and further development of white biotechnology, the postulated constraints and incentives as well as new promotions are discussed with the help of expert interviews. On the basis of a preliminary study - after further discussion with experts - concrete proposals on improvements related to an ongoing establishment of biotechnology will be derived. Based on case studies (2nd generation biofuels, polyhydroxybutyrate as biopolymer and phytase as an animal feed additive), the practical effects and specific conditions to incentives, from the perspective of biotechnological processes and environmentally friendly products are investigated. Overall, about 40 activities were recommended, which could be assigned to areas of direct government incentives (tax policy/subsidies, subsidies, education and research policy, basic political conditions, government demand and information policy/consumer intelligence) as well as non-governmental incentives (knowledge transfer and cooperation, organisation-related policy, capital market financing). (orig.)

Effective mechanisms for environmental awareness enhancement of the Thai public company

Science.gov (United States)

Tilokwan, P.; Limjirakan, S.

2018-02-01

The purpose of this paper is to explore effective mechanisms towards environmental awareness enhancement of the Thai public company. The environmental awareness has been strongly mentioned in the international agenda such as Agenda 21 to achieve sustainable development and be implemented at the global communities in all sectors. Thailand’s environmental awareness has been set up as the national policy and continuously promoted in the business sectors. The selected study area is one of Thai industrial public companies mainly utilizing natural resources for its business. Data collection was conducted by using questionnaires with a stratified sampling method comprising of 28 managerial and 134 operational levels. Descriptive statistics were be used for data analysis presented in terms of percentage. The study found that the effective mechanisms towards environmental awareness enhancement include employees’ participation in environmental friendly field trip, environmental knowledge provided by the company, supply chain involvement, law enforcement, and international environmental standard applied by the company. This study would recommend that public participation should be involved in order to make the mechanisms effectively.

The effect of friend selection on social influences in obesity.

Science.gov (United States)

Trogdon, Justin G; Allaire, Benjamin T

2014-12-01

We present an agent-based model of weight choice and peer selection that simulates the effect of peer selection on social multipliers for weight loss interventions. The model generates social clustering around weight through two mechanisms: a causal link from others' weight to an individual's weight and the propensity to select peers based on weight. We simulated weight loss interventions and tried to identify intervention targets that maximized the spillover of weight loss from intervention participants to nonparticipants. Social multipliers increase with the number of intervention participants' friends. For example, when friend selection was based on a variable exogenous to weight, the weight lost among non-participants increased by 23% (14.3lb vs. 11.6lb) when targeting the most popular obese. Holding constant the number of participants' friends, multipliers increase with increased weight clustering due to selection, up to a point. For example, among the most popular obese, social multipliers when matching on a characteristic correlated with weight (1.189) were higher than when matching on the exogenous characteristic (1.168) and when matching on weight (1.180). Increased weight clustering also implies more obese "friends of friends" of participants, who reduce social multipliers. Copyright © 2014 Elsevier B.V. All rights reserved.

Eco-friendly dentistry: Need of future. An overview

Directory of Open Access Journals (Sweden)

Savy Arora

2017-01-01

Full Text Available In today's world, it is very necessary to understand the importance of being eco-friendly in every facet of our lives. The color “green” has healing power and denotes renewal, growth, and hope. “Eco-friendly dentistry” attempts to reduce the detrimental impact of dental practices on the environment and promote environmental awareness and sustainability to patients. This paper attempts to cover all possible aspects of making a dental practice eco-friendly, both in a dental perspective as well as a general perspective. While establishing an eco-friendly dental workplace, the dentist needs to assess his choices in planning the infrastructure and purchasing of equipment and dental materials. Eco-friendly dentistry is a newly evolving practice of dentistry, which encompasses a simultaneous devotion to sustainability, prevention, precaution, and a minimally invasive patient-centric, as well as global-centric treatment. There are two main avenues for implementing eco-friendly dentistry: (1 appropriate policy development and implementation and (2 dentists taking responsibility/ownership in the absence of policies and regulations. Although in some cases, it may take a little extra effort or money; dentists throughout the world are doing their best to reduce the environmental impact of the dental practice. Although the commitment of one small dental office cannot save the planet, certainly, the collective efforts of many small offices as well as large dental hospitals/colleges can ensure that dentists, at least, will not be responsible for destroying it. This article discusses various factors that can be incorporated into dental practice that can help make dentistry eco-friendly.

Integrated studies for automobile wastes management in developing countries; in the concept of environmentally friendly mechanic village.

Science.gov (United States)

Nwachukwu, Michael Amamechi; Feng, Huan; Achilike, Kennedy

2011-07-01

More cities in developing countries now consider mechanic village (MV) as superior to the city wide auto-workshop practice following the increasing influx of used or waste automobile from industrialized nations. This is because of the numerous advantages of the mechanic village concept as a capacity building, and in poverty alleviation. Nevertheless, mechanic villages are poorly developed with no waste management plan. They are now identified with severe to excessive heavy metal soil pollution, causing ecological and public health hazards. This paper has a wider explanation of what it takes for a mechanic village to be environmentally friendly based on spectroscopic analysis and physical measurements conducted in three MVs. Heavy metal concentrations (mg kg( -1)) above background levels in the upper 100 cm soil profiles of the Okigwe, the Orji, and the Nekede MVs in the Imo River basin collectively range 748-70,606 for Fe; 99-1,090 for Pb; 186-600 for Mn; 102-1,001 for Cu; 8-23 for Cd; 4-27 for Cr; and 3-10 for Ni. The most abundant metals of environmental concerns are Pb, Mn, and Cu, in the order of Pb > Mn > Cu. Three-phase storm water treatment, emission testing, minimum safe farming distance (350 m), extended producer responsibility for disposal or recycling of used motor oil, phyto-remediation using local plants, groundwater monitoring wells, and continuous education of mechanics are recommended. Exporters of waste automobiles to developing countries and the United Nations may assist developing countries in establishing environmentally friendly MVs.

Eco-Friendly Magnetic Iron Oxide Pillared Montmorillonite for Advanced Catalytic Degradation of Dichlorophenol

Science.gov (United States)

Eco-friendly pillared montmorillonites, in which the pillars consist of iron oxide are expected to have interesting and unusual magnetic properties that are applicable for environmental decontamination. Completely “green” and effective composite was synthesized using mild reactio...

How environmental costs impact DSM

International Nuclear Information System (INIS)

Sim, S.R.

1991-01-01

This article examines the impacts of environmental costs of electricity generation into utility planning of demand side management (DSM) programs. The topics include approach and assumptions, overview of spreadsheet approach, results of the analyses, and the application of this approach to other areas of utility management such as new generation projects, sales of new generation capacity, and utility liability and management prudency

RJD A Cost Effective Frackless Solution For Production Enhancement In Marginal Fields

Directory of Open Access Journals (Sweden)

Ahmed Kamel

2017-02-01

Full Text Available With the worldwide trend of low oil prices high maturity of oil fields excessive cost of horizontal and fracking technologies and necessity for green drilling applications radial jet drilling RJD technology can be a cost effective and environmentally-friendly alternative. RJD is an unconventional drilling technique that utilizes coiled tubing conveyed tools and the energy of high velocity jet fluids to drill laterals inside the reservoir. In recent years rapid advances in high pressure water jet technology has tremendously increased its application in oil and gas industry not only in drilling operations to improve drilling rate and reduce drilling cost but also in production to maximize hydrocarbon recovery. In addition RJD can be used to bypass near wellbore damage direct reservoir treatmentsinjections improve water disposal and re-injection rates and assist in steam or CO2 treatments. This paper highlights the theoretical basis technological advancement procedures applications and challenges of high pressure water jets. Several worldwide case studies are discussed to evaluate the success results pros and cons of RJD. The results show that nearly an average of four to five fold production increase can be obtained. The present paper clearly shows that radial jet drilling is a viable and attractive alternative in marginal and small reservoirs that still have significant oil in place to capture the benefits of horizontal drillingfracking and to improve productivity from both new wells andor workover wells that cannot be produced with the existing expensive conventional completions.

Environmental Cost Accounting – Assessing the Environmental Responsibility Effort

Directory of Open Access Journals (Sweden)

Florian Marcel Nuțǎ

2012-05-01

Full Text Available The paper’s aim is to evaluate different approaches of environmental cost accounting used aroundthe world. One of the main issues of modern enterprise is to affirm its responsible behavior and to connect itwith a positive economic benefit for the shareholders. Practically the management systems must find a way toaddress all the stakeholders’ interests and needs.

Opportunities for cost reduction and improved environmental impact in the lead and lead/acid battery industries

Science.gov (United States)

Lewis, N.

The opportunities for cost reduction through improved environmental performance exist in many companies, but often are not realized. This paper describes the efforts of a typical firm — Calder Industrial Materials (CIM) — that is experiencing ever-tighter environmental controls and profit erosion through the effects of new environmental legislation. At the same time, however, CIM sees opportunities to reduce its environmental burden and cut costs. As the story unfolds, readers may well discover many parallels with their own companies. It may even spur some into action, for remember, every £1000 saved requires ten times the turnover to generate the same profit.

Cost effectiveness of radon mitigation in Canada

International Nuclear Information System (INIS)

Letourneau, E.G.; Krewski, D.; Zielinski, J.M.; McGregor, R.G.

1992-01-01

This paper examines the cost effectiveness of comprehensive strategies for reducing exposure to radon gas in indoor air in Canadian homes. The analysis is conducted within the context of a general framework for risk management programme evaluation which includes well-known evaluation techniques such as cost effectiveness and cost-benefit analyses as special cases. Based on this analysis, it is clear that any comprehensive programme to reduce exposure to environmental radon will be extremely expensive, and may not be justifiable in terms of health impact, particularly when considered in relation to other public health programmes. Testing of homes at the point of sale and installing sub-slab suction equipment to reduce exposure to indoor radon where necessary appears to be a relatively cost-effective radon mitigation strategy. In general, radon mitigation was found to be most cost effective in cities with relatively high levels of radon. (author)

Internalizing environmental costs: A survey of progress in estimating the external environmental costs of electricity production and a review of market-based policies to incorporate them

International Nuclear Information System (INIS)

Eto, J.H.; Helcke, G.

1991-01-01

The production of electricity creates environmental insults whose costs are not fully reflected in the prices paid by consumers for electricity services. Failure to incorporate these external costs leads to economically inefficient production and consumption decisions. The present work reviews two related efforts to address this market distortion. The first concerns progress in estimating the uninternalized environmental costs of electricity production. The second concerns market-based approaches to internalizing these costs in electricity production and consumption decisions. 10 tabs.; 41 refs

Solution-Processed Environmentally Friendly Ag2S Colloidal Quantum Dot Solar Cells with Broad Spectral Absorption

Directory of Open Access Journals (Sweden)

Viktor A. Öberg

2017-10-01

Full Text Available A facile heat-up synthesis route is used to synthesize environmentally friendly Ag2S colloidal quantum dots (CQDs that are applied as light absorbing material in solid state p-i-n junction solar cell devices. The as-synthesized Ag2S CQDs have an average size of around 3.5 nm and exhibit broad light absorption covering ultraviolet, visible, and near infrared wavelength regions. The solar cell devices are constructed with a device architecture of FTO/TiO2/Ag2S CQDs/hole transport material (HTM /Au using a solution-processed approach. Different HTMs, N2,N2,N2′,N2′,N7,N7,N7′,N7′-octakis(4-methoxyphenyl-9,9′-spirobi(9H-fluorene-2,2′,7,7′ tetramine (spiro-OMeTAD, poly(3-hexylthiophene-2,5-diyl (P3HT, and poly((2,3-bis(3-octyloxyphenyl-5,8-quinoxalinediyl-2,5-thiophenediyl TQ1 are studied for maximizing the device photovoltaic performance. The solar cell device with P3HT as a hole transport material gives the highest performance and the solar cell exhibit broad spectral absorption. These results indicate that Ag2S CQD have high potential for utilization as environmentally friendly light absorbing materials for solar cell application and that the hole transport material is critical to maximize the solar cell photovoltaic performance.

Calotropis procera seedlings could be used as a rapid cost effective bioindicator for measuring aluminum environmental pollution

Science.gov (United States)

Mosa, Kareem A.; El-Keblawy, Ali; Najar, Atyat

2017-04-01

Calotropis procera seedlings could be used as a rapid cost effective bioindicator for measuring aluminum environmental pollution Kareem A. Mosa, Ali El-Keblawy, Atyat Najar Department of Applied Biology, College of Sciences, University of Sharjah, UAE Rapid industrialization and urbanization processes has led to the incorporation of different heavy metals in natural resources like soil, water and air thus affecting their quality. Aluminum (Al) is a dominant heavy metal pollutant that causes serious toxic effects to living systems including plants. Therefore, it is critical to regularly monitor the changes in Al levels in natural resources. Living organisms could be used as bioindicators for monitoring and measuring the levels of heavy metals in environmental samples. The aim of this study was to develop a cost effective bioindicator for monitoring aluminum (Al) and assess the damage caused by Al bioaccumulation using the root system of Calotropis Procera seedlings. A hydroponic system was developed for growing C. Procera in four different concentrations of Al (20, 40, 60 and 80 ppm). Root length and shoot fresh and dry weights were assessed after 5, 10, 15 and 20 days of Al treatment. The results showed remarkable sensitivity of C. Procera seedlings for the different concentrations of Al. There was gradual but significant decrease in C. Procera root length with the increase in the Al concentrations. X-ray fluorescence microscopy (XRF) analysis indicated a significant increase in Al concentration in C. Procera roots with the increase of both Al concentration in the hydroponic solution and the growing period. Moreover, electrical conductivity analysis showed that Al induced damage to C. Procera root plasma membrane as indicated by the increase in electrolyte leakages. Randomly amplified polymorphic DNA (RAPD) PCR analysis confirmed the genotoxin effect of Al which induced C. Procera genomic DNA modification. Altogether, the result demonstrated that C. Procera could

Structure Study of Cellulose Fibers Wet-Spun from Environmentally Friendly NaOH/Urea Aqueous Solutions

Energy Technology Data Exchange (ETDEWEB)

Chen,X.; Burger, C.; Wan, F.; Zhang, J.; Rong, L.; Hsiao, B.; Chu, B.; Cai, J.; Zhang, L.

2007-01-01

In this study, structure changes of regenerated cellulose fibers wet-spun from a cotton linter pulp (degree of polymerization {approx}620) solution in an NaOH/urea solvent under different conditions were investigated by simultaneous synchrotron wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS). WAXD results indicated that the increase in flow rate during spinning produced a better crystal orientation and a higher degree of crystallinity, whereas a 2-fold increase in draw ratio only affected the crystal orientation. When coagulated in a H{sub 2}SO{sub 4}/Na{sub 2}SO{sub 4} aqueous solution at 15 {sup o}C, the regenerated fibers exhibited the highest crystallinity and a crystal orientation comparable to that of commercial rayon fibers by the viscose method. SAXS patterns exhibited a pair of meridional maxima in all regenerated cellulose fibers, indicating the existence of a lamellar structure. A fibrillar superstructure was observed only at higher flow rates (>20 m/min). The conformation of cellulose molecules in NaOH/urea aqueous solution was also investigated by static and dynamic light scattering. It was found that cellulose chains formed aggregates with a radius of gyration, R{sub g}, of about 232 nm and an apparent hydrodynamic radius, R{sub h}, of about 172 nm. The NaOH/urea solvent system is low-cost and environmentally friendly, which may offer an alternative route to replace more hazardous existing methods for the production of regenerated cellulose fibers.

Environmental Impact Optimization of Reinforced Concrete Slab Frame Bridges

DEFF Research Database (Denmark)

Yavari, Majid Solat; Du, Guangli; Pacoste, Costin

2017-01-01

The main objective of this research is to integrate environmental impact optimization in the structural design of reinforced concrete slab frame bridges in order to determine the most environmental-friendly design. The case study bridge used in this work was also investigated in a previous paper...... focusing on the optimization of the investment cost, while the present study focuses on environmental impact optimization and comparing the results of both of these studies. Optimization technique based on the pattern search method was implemented. Moreover, a comprehensive Life Cycle Assessment (LCA......) methodology of ReCiPe and two monetary weighting systems were used to convert environmental impacts into monetary costs. The analysis showed that both monetary weighting systems led to the same results. Furthermore, optimization based on environmental impact generated models with thinner construction elements...

Polycyclic Aromatic Hydrocarbons: A Critical Review of Environmental Occurrence and Bioremediation.

Science.gov (United States)

Alegbeleye, Oluwadara Oluwaseun; Opeolu, Beatrice Oluwatoyin; Jackson, Vanessa Angela

2017-10-01

The degree of polycyclic aromatic hydrocarbon contamination of environmental matrices has increased over the last several years due to increase in industrial activities. Interest has surrounded the occurrence and distribution of polycyclic aromatic hydrocarbons for many decades because they pose a serious threat to the health of humans and ecosystems. The importance of the need for sustainable abatement strategies to alleviate contamination therefore cannot be overemphasised, as daily human activities continue to create pollution from polycyclic aromatic hydrocarbons and impact the natural environment. Globally, attempts have been made to design treatment schemes for the remediation and restoration of contaminated sites. Several techniques and technologies have been proposed and tested over time, the majority of which have significant limitations. This has necessitated research into environmentally friendly and cost-effective clean-up techniques. Bioremediation is an appealing option that has been extensively researched and adopted as it has been proven to be relatively cost-effective, environmentally friendly and is publicly accepted. In this review, the physicochemical properties of some priority polycyclic aromatic hydrocarbons, as well as the pathways and mechanisms through which they enter the soil, river systems, drinking water, groundwater and food are succinctly examined. Their effects on human health, other living organisms, the aquatic ecosystem, as well as soil microbiota are also elucidated. The persistence and bioavailability of polycyclic aromatic hydrocarbons are discussed as well, as they are important factors that influence the rate, efficiency and overall success of remediation. Bioremediation (aerobic and anaerobic), use of biosurfactants and bioreactors, as well as the roles of biofilms in the biological treatment of polycyclic aromatic hydrocarbons are also explored.

Polycyclic Aromatic Hydrocarbons: A Critical Review of Environmental Occurrence and Bioremediation

Science.gov (United States)

Alegbeleye, Oluwadara Oluwaseun; Opeolu, Beatrice Oluwatoyin; Jackson, Vanessa Angela

2017-10-01

The degree of polycyclic aromatic hydrocarbon contamination of environmental matrices has increased over the last several years due to increase in industrial activities. Interest has surrounded the occurrence and distribution of polycyclic aromatic hydrocarbons for many decades because they pose a serious threat to the health of humans and ecosystems. The importance of the need for sustainable abatement strategies to alleviate contamination therefore cannot be overemphasised, as daily human activities continue to create pollution from polycyclic aromatic hydrocarbons and impact the natural environment. Globally, attempts have been made to design treatment schemes for the remediation and restoration of contaminated sites. Several techniques and technologies have been proposed and tested over time, the majority of which have significant limitations. This has necessitated research into environmentally friendly and cost-effective clean-up techniques. Bioremediation is an appealing option that has been extensively researched and adopted as it has been proven to be relatively cost-effective, environmentally friendly and is publicly accepted. In this review, the physicochemical properties of some priority polycyclic aromatic hydrocarbons, as well as the pathways and mechanisms through which they enter the soil, river systems, drinking water, groundwater and food are succinctly examined. Their effects on human health, other living organisms, the aquatic ecosystem, as well as soil microbiota are also elucidated. The persistence and bioavailability of polycyclic aromatic hydrocarbons are discussed as well, as they are important factors that influence the rate, efficiency and overall success of remediation. Bioremediation (aerobic and anaerobic), use of biosurfactants and bioreactors, as well as the roles of biofilms in the biological treatment of polycyclic aromatic hydrocarbons are also explored.

Shrinking the food-print: A qualitative study into consumer perceptions, experiences and attitudes towards healthy and environmentally friendly food behaviours.

Science.gov (United States)

Hoek, A C; Pearson, D; James, S W; Lawrence, M A; Friel, S

2017-01-01

Internationally, there is increasing recognition of the importance of multilevel policies and actions that address healthy and environmentally friendly food behaviours. However it is not yet clear which actions are most suitable to support consumers to adopt both behaviours concurrently. To this end, we undertook a qualitative study to assess consumer perceptions, experiences and attitudes towards healthy and environmentally friendly foods and four target behaviours: reducing overconsumption of food beyond energy needs, reducing consumption of low-nutrient energy dense foods, eating less animal- and more plant-derived foods, and reducing food waste. Online in-depth interviews were held with 29 Australian food shoppers representing different levels of involvement with health and environment in daily food choices. The results indicate that compared to health, the relationship between food and the environment is rarely considered by consumers. The four target food behaviours were primarily associated and motivated by an impact on health, except for not wasting foods. Participants had the most positive attitude and highest motivation for eating less processed and packaged foods, mostly to avoid excessive packaging and 'chemicals' in foods. This was followed by the behaviours reducing food waste and overconsumption. Conversely, there was a predominantly negative attitude towards, and low motivation for, eating less animal-derived products and more plant based foods. Overall, consumers found a joined concept of healthy and environmentally friendly foods an acceptable idea. We recommend that health should remain the overarching principle for policies and actions concerned with shifting consumer behaviours, as this personal benefit appears to have a greater potential to support behaviour change. Future consumer focused work could pay attention to framing behavioural messages, providing intermediate behavioural goals, and a multiple target approach to change habitual

Feasibility survey of the environmentally-friendly coal utilization system. Feasibility survey of the environmentally-friendly coal utilization system in Indonesia; Kankyo chowagata sekitan riyo system kanosei chosa. Indonesia ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

With relation to the coal of Indonesia, where the expansion of the use of coal as a substitute for petroleum/plant fuel is aimed at, the paper grasped the situation of coal production/distribution/utilization and environmental problems, and analyzed the situation of the coal utilization/spread by industry including the commercial/residential use. The purpose of the survey is to work out a comprehensive master plan including Japan`s international cooperation for introducing the environmentally-friendly coal utilization system to Indonesia. Coal utilization systems, the introduction of which Indonesia should study in future, were picked up, according to the surveys in fiscal 1993 and 1994. In commercial/residential and small-scale industry sectors, needed is improvement of carbonization technology for production of coal carbonization briquette. Moreover, the introduction of bio-briquette should be studied in the future. In the power generation sector, studies should be made on the introduction of technology for SOx/NOx reduction and technology for coal ash treatment including the effective use of coal ash. For the introduction of coal boilers, the combustion mixed with bagasse, which is abundant in amount, is also necessary. In the coal production sector, coal preparation technology is studied, and a method to select the optimum process was proposed through the simulation. 76 figs., 43 tabs.

The costs of avoiding environmental impacts from shale-gas surface infrastructure.

Science.gov (United States)

Milt, Austin W; Gagnolet, Tamara D; Armsworth, Paul R

2016-12-01

Growing energy demand has increased the need to manage conflicts between energy production and the environment. As an example, shale-gas extraction requires substantial surface infrastructure, which fragments habitats, erodes soils, degrades freshwater systems, and displaces rare species. Strategic planning of shale-gas infrastructure can reduce trade-offs between economic and environmental objectives, but the specific nature of these trade-offs is not known. We estimated the cost of avoiding impacts from land-use change on forests, wetlands, rare species, and streams from shale-energy development within leaseholds. We created software for optimally siting shale-gas surface infrastructure to minimize its environmental impacts at reasonable construction cost. We visually assessed sites before infrastructure optimization to test whether such inspection could be used to predict whether impacts could be avoided at the site. On average, up to 38% of aggregate environmental impacts of infrastructure could be avoided for 20% greater development costs by spatially optimizing infrastructure. However, we found trade-offs between environmental impacts and costs among sites. In visual inspections, we often distinguished between sites that could be developed to avoid impacts at relatively low cost (29%) and those that could not (20%). Reductions in a metric of aggregate environmental impact could be largely attributed to potential displacement of rare species, sedimentation, and forest fragmentation. Planners and regulators can estimate and use heterogeneous trade-offs among development sites to create industry-wide improvements in environmental performance and do so at reasonable costs by, for example, leveraging low-cost avoidance of impacts at some sites to offset others. This could require substantial effort, but the results and software we provide can facilitate the process. © 2016 Society for Conservation Biology.

Assessing District-Heating Sustainability. Case Studies of CO{sub 2} Mitigation Strategies and Environmental Cost Accounting

Energy Technology Data Exchange (ETDEWEB)

Fahlen, Elsa

2012-11-01

District heating (DH) may play an important role in achieving the EU goal of a secure, competitive and sustainable energy supply. Integrated energy solutions based on technologies, such as biomass gasification for transport fuel, electricity and heat production and heat-driven absorption cooling, create new optimisation possibilities through the linkage between heat, power, cooling and transport fuel markets which may reduce the global warming contribution of the energy sector. With increasing focus on climate change impacts of greenhouse gas emissions, the environmental effects of other air pollutants should not be neglected. To achieve both a competitive and a sustainable energy supply, it is necessary to integrate environmental considerations into economic policies. Through accounting for external costs of air pollution in energy system modelling and analysis, sustainability aspects may be integrated into DH assessments. The aim of this thesis is to develop, apply and evaluate methodologies for assessing conventional and new technology solutions in a DH system; the assessments are made from a DH perspective with respect to two factors - cost-effectiveness and environmental impacts - which are either assessed separately or integrated through external cost accounting. Various CO{sub 2} mitigation strategies are evaluated with regard to the robustness of the DH system in meeting future developments of energy market prices and policies. The studies are performed using a systems approach by using the simulating DH supply model MARTES as applied to the DH system Sweden. This thesis concludes that the integration of biomass gasification technology and absorption cooling technology in DH systems has the potential for cost-effective CO{sub 2} emission reduction, in line with other EU goals to increase the share of renewable sources in energy use and to increase energy efficiency. Accounting for external costs of not only climate change but also other environmental

The remarkable environmental rebound effect of electric cars: a microeconomic approach.

Science.gov (United States)

Font Vivanco, David; Freire-González, Jaume; Kemp, René; van der Voet, Ester

2014-10-21

This article presents a stepwise, refined, and practical analytical framework to model the microeconomic environmental rebound effect (ERE) stemming from cost differences of electric cars in terms of changes in multiple life cycle environmental indicators. The analytical framework is based on marginal consumption analysis and hybrid life cycle assessment (LCA). The article makes a novel contribution through a reinterpretation of the traditional rebound effect and methodological refinements. It also provides novel empirical results about the ERE for plug-in hybrid electric (PHE), full-battery electric (FBE), and hydrogen fuel cell (HFC) cars for Europe. The ERE is found to have a remarkable impact on product-level environmental scores. For the PHE car, the ERE causes a marginal increase in demand and environmental pressures due to a small decrease in the cost of using this technology. For FBE and HFC cars, the high capital costs cause a noteworthy decrease in environmental pressures for some indicators (negative rebound effect). The results corroborate the concern over the high influence of cost differences for environmental assessment, and they prompt sustainable consumption policies to consider markets and prices as tools rather than as an immutable background.

Effect of Trajectories of Friends' and Parents' School Involvement on Adolescents' Engagement and Achievement.

Science.gov (United States)

Im, Myung Hee; Hughes, Jan N; West, Stephen G

2016-12-01

In a sample of 527 academically at-risk youth, we investigated trajectories of friends' and parents' school involvement across ages 12-14 and the joint contributions of these trajectories to adolescents' age 15 school engagement and academic achievement. Girls reported higher levels of friends' and parents' school involvement than boys. Both parents' and friends' school involvement declined across ages 12-14. Combined latent growth models and structural equation models showed effects of the trajectories of friends' and parents' school involvement on adolescents' age 15 school engagement and academic achievement, over and above adolescents' prior performance. These effects were additive rather than interactive. Strategies for enhancing parent involvement in school and students' affiliation with peers who are positively engaged in school are discussed.

The impact of Nordic countries' family friendly policies on employment, wages, and children

DEFF Research Database (Denmark)

Gupta, Nabanita Datta; Smith, Nina; Verner, Mette

2008-01-01

-friendly policies mainly directed towards giving mothers the right to be on long paid maternal leave have adverse effects on women's wages with consequences for gender equality. Indeed, extensive family-friendly schemes may even have created a `system-based glass ceiling' hindering women's career progression......The Nordic countries at the same time exhibit a remarkably high participation rate of mothers and a more moderate decline in fertility rates compared to other Western countries. This has been attributed to the fact that the welfare state model and, especially, the family friendly policies chosen...... in the Nordic countries are unique. In this paper we evaluate the impact of Nordic countries' family friendly policies on employment, wages and children's well-being. We demonstrate that, although the `Nordic model' has been successful in boosting female employment, it is a costly solution. Furthermore, family...

Constructing Fluorine-Free and Cost-Effective Superhydrophobic Surface with Normal-Alcohol-Modified Hydrophobic SiO2 Nanoparticles.

Science.gov (United States)

Ye, Hui; Zhu, Liqun; Li, Weiping; Liu, Huicong; Chen, Haining

2017-01-11

Superhydrophobic coatings have drawn much attention in recent years for their wide potential applications. However, a simple, cost-effective, and environmentally friendly approach is still lacked. Herein, a promising approach using nonhazardous chemicals was proposed, in which multiple hydrophobic functionalized silica nanoparticles (SiO 2 NPs) were first prepared as core component, through the efficient reaction between amino group containing SiO 2 NPs and the isocyanate containing hydrophobic surface modifiers synthesized by normal alcohols, followed by simply spraying onto various substrates for superhydrophobic functionalization. Furthermore, to further improve the mechanical durability, an organic-inorganic composite superhydrophobic coating was fabricated by incorporating cross-linking agent (polyisocyanate) into the mixture of hydrophobic-functionalized SiO 2 NPs and hydroxyl acrylic resin. The hybrid coating with cross-linked network structures is very stable with excellent mechanical durability, self-cleaning property and corrosion resistance.

Insights from a Systematic Search for Information on Designs, Costs, and Effectiveness of Poliovirus Environmental Surveillance Systems.

Science.gov (United States)

Duintjer Tebbens, Radboud J; Zimmermann, Marita; Pallansch, Mark A; Thompson, Kimberly M

2017-12-01

Poliovirus surveillance plays a critical role in achieving and certifying eradication and will play a key role in the polio endgame. Environmental surveillance can provide an opportunity to detect circulating polioviruses prior to the observation of any acute flaccid paralysis cases. We completed a systematic review of peer-reviewed publications on environmental surveillance for polio including the search terms "environmental surveillance" or "sewage," and "polio," "poliovirus," or "poliomyelitis," and compared characteristics of the resulting studies. The review included 146 studies representing 101 environmental surveillance activities from 48 countries published between 1975 and 2016. Studies reported taking samples from sewage treatment facilities, surface waters, and various other environmental sources, although they generally did not present sufficient details to thoroughly evaluate the sewage systems and catchment areas. When reported, catchment areas varied from 50 to over 7.3 million people (median of 500,000 for the 25% of activities that reported catchment areas, notably with 60% of the studies not reporting this information and 16% reporting insufficient information to estimate the catchment area population size). While numerous studies reported the ability of environmental surveillance to detect polioviruses in the absence of clinical cases, the review revealed very limited information about the costs and limited information to support quantitative population effectiveness of conducting environmental surveillance. This review motivates future studies to better characterize poliovirus environmental surveillance systems and the potential value of information that they may provide in the polio endgame.

On-site vs off-site management of environmental restoration waste: A cost effectiveness analysis

International Nuclear Information System (INIS)

Morse, M.A.; Aamodt, P.L.; Cox, W.B.

1996-01-01

The Sandia National Laboratories Environmental Restoration Project is expected to generate relatively large volumes of hazardous waste as a result of cleanup operations. These volumes will exceed the Laboratories existing waste management capacity. This paper presents four options for managing remediation wastes, including three alternatives for on-site waste management utilizing a corrective action management unit (CAMU). Costs are estimated for each of the four options based on current volumetric estimates of hazardous waste. Cost equations are derived for each of the options with the variables being waste volumes, the major unknowns in the analysis. These equations provide a means to update cost estimates as volume estimates change. This approach may be helpful to others facing similar waste management decisions

Environmental Management Accounting (EMA: Reflection of Environmental Factors in the Accounting Processes through the Identification of the Environmental Costs Attached to Products, Processes and Services

Directory of Open Access Journals (Sweden)

Cleopatra Sendroiu

2006-10-01

Full Text Available EMA can be defined as the identification, collection, estimation, analysis, internal reporting, and use of materials and energy flow information, environmental cost information, and other cost information for both conventional and environmental decision-making within an organization. Thus EMA incorporates and integrates two of the three building blocks of sustainable development – environment and economics – as they relate to an organization’s internal decision-making. EMA is a relatively new tool in environmental management. Decades ago environmental costs were very low, so it seemed wise to include them in the overhead account for simplicity and convenience. Recently there has been a steep rise in all environmental costs, including energy and water prices as well as liabilities.

Environmental Management Accounting (EMA: Reflection of Environmental Factors in the Accounting Processes through the Identification of the Environmental Costs Attached to Products, Processes and Services

Directory of Open Access Journals (Sweden)

Costantin Roman

2006-12-01

Full Text Available EMA can be defined as the identification, collection, estimation, analysis, internal reporting, and use of materials and energy flow information, environmental cost information, and other cost information for both conventional and environmental decision-making within an organization. Thus EMA incorporates and integrates two of the three building blocks of sustainable development – environment and economics – as they relate to an organization’s internal decision-making. EMA is a relatively new tool in environmental management. Decades ago environmental costs were very low, so it seemed wise to include them in the overhead account for simplicity and convenience. Recently there has been a steep rise in all environmental costs, including energy and water prices as well as liabilities.

Acid rain abatement in Belgium: lessons in cost-effectiveness studies

International Nuclear Information System (INIS)

Cuijpers, C.; Proost, S.

1992-01-01

In this paper a cost-effectiveness analysis is presented for combating emissions of acid precursors. The focus of concern is to reach the environmental quality goal at least cost. Two cost-effective approaches are elaborated. Firstly, the maximum allowable emission of each acid precursor seperately is allocated in a cost-effective way across the economic sectors. Secondly, the maximum allowable emissions of acid precursors are allocated in a cost-effective way across the three considered acid precursors as well as across the economic sectors. It is argued that not only the energy consumption but also the agricultural sector could play an important role in a cost-effective strategy by curtailing its ammonia emissions. 6 refs., 8 figs., 1 tab

Dual discounting in cost-benefit analysis for environmental impacts

International Nuclear Information System (INIS)

Kula, Erhun; Evans, David

2011-01-01

Discounting has been a long-established intertemporal efficiency tool in cost-benefit analysis which focuses on project selection at communal level with a view to maximising the social welfare. However, with the relentless growth in environmental stress that, in good parts, stems from investment projects the established criterion in discounting appears to be inadequate especially when environmental issues are taken into consideration. This paper looks at how dual focus on efficiency and sustainability can be achieved by using dual discounting, i.e. discounting environmental benefits separately and differently from other costs and benefits and applies this alternative criterion to an afforestation scheme in the United Kingdom which contains carbon sequestration in addition to timber benefits.

Is There a Limit to Growth? Comparing the Environmental Cost of an Airport’s Operations with Its Economic Benefit

Directory of Open Access Journals (Sweden)

Cherie Lu

2017-11-01

Full Text Available With the growing global awareness of the requirement for sustainable development, economic development is no longer the sole objective of business activities. The need to find a balance between environmental impacts and economic benefits is especially the case for airport operations in or around cities. This study measured the environmental costs and economic benefits and of an airport for a period of 10 years, using Taipei Songshan Airport for the empirical analysis, to examine whether the environmental costs could outweigh the economic benefits. Of all the environmental negative side effects, aircraft engine emissions and noise nuisance are considered the main sources of environmental impacts. The dose-response method and the hedonic price method, respectively, were used for estimating the social costs of these. Income generation from both direct and secondary employment is measured as economic benefits by applying the Garin-Lowry model, originally developed in 1966, for estimation of the employment multiplier. The results show that, in general, the operation of Taipei Songshan Airport brought more economic benefits than environmental costs. The sensitivity analysis of emissions and noise social cost parameters shows that the environmental costs might have exceeded the economic benefits in 2008 and 2009 in certain high emissions and noise social cost cases.

The role of natural gas in assessing environmental cost of fossil fuels

International Nuclear Information System (INIS)

Riva, A.; Trebeschi, C.

1999-01-01

The actual price of a resource is the results of its internal and external costs. Internal costs means the price paid by the users in order to utilise the resource. On the other hand, externals costs, which are associated with the resource, are not paid directly by the users, but they shall be paid for by the society of the future generations. The article presents methodologies and issues relevant to energy policy decisions, when it comes to evaluating and using environmental external costs of fossil fuel life, with particular consideration to the end-use phase. The results of published studies on environmental costs of energy sources and an analysis applied to the Italia case show that natural gas as a significantly higher environmental value than other fossil fuels. The range of values depends upon the technologies considered and on the assumptions adopted when assessment environmental damages [it

ASSESSING THE EFFECT OF ANTIBIOTICS ON THE RESISTANCE OF RESIDENT MICROBES IN WETLANDS CONSTRUCTED FOR WASTEWATER TREATMENT

Science.gov (United States)

The use of constructed wetlands as a cost effective and environmentally friendly option for wastewater treatment is becoming more prevalent. These systems are championed as combining many of the benefits of tertiary treatment while also providing high quality wetland habitat as...

Inefficient national environmental regulation as a signal of high abatement costs

Energy Technology Data Exchange (ETDEWEB)

Steiner, U.

1997-12-31

This paper analyses the importance of informational asymmetries in international environmental regulation by use of a game theoretic approach of signaling games. More specific it analysis whether it is possible for a government to try to extract higher compensation in an international unidirectoral environmental problem. This may be possible when the national environmental regulation carries a signal of the cost of the regulated industry. In this case the government e.g. by means of inefficient environmental regulation on a national level may try to signal high abatement costs. In spite of the fact that many international environmental problems seem to be solvable by the use of financial payments there are only few examples that compensation payment arrangements have been implemented. As many countries and especially many polluting firms possess better information about abatement costs than the countries that receive the pollution, it is worthwhile to include asymmetric information. Consequently, this paper analyses whether the introduction of asymmetric information about abatement costs may bring forward incentives to misrepresent the true abatement cost in order to capture more compensation. If these incentives turn out to be present, it may explain some of the suspicion against using financial payment in order to induce other countries to join an agreement. The analysis shows that it may indeed be the case that the expected gain from cheating is so large that it gives incentives to use an inefficient national environmental policy. (au) 13 refs.

Quantifying environmental performance using an environmental footprint calculator

Energy Technology Data Exchange (ETDEWEB)

Smith, D.B.; Loney, A.C.; Chan, V. [Conestoga-Rovers & Associates, Waterloo, Ontario (Canada)

2009-07-01

This paper provides a case study using relevant key performance indicators (KPIs) to evaluate the environmental performance of a business. Using recognized calculation and reporting frameworks, Conestoga-Rovers & Associates (CRA) designed the Environmental Footprint Calculator to quantify the environmental performance of a Canadian construction materials company. CRA designed the Environmental Footprint calculator for our client to track and report their environmental performance in accordance with their targets, based on requirements of relevant guidance documents. The objective was to design a tool that effectively manages, calculates, and reports environmental performance to various stakeholders in a user-friendly format. (author)

Quantifying environmental performance using an environmental footprint calculator

International Nuclear Information System (INIS)

Smith, D.B.; Loney, A.C.; Chan, V.

2009-01-01

This paper provides a case study using relevant key performance indicators (KPIs) to evaluate the environmental performance of a business. Using recognized calculation and reporting frameworks, Conestoga-Rovers & Associates (CRA) designed the Environmental Footprint Calculator to quantify the environmental performance of a Canadian construction materials company. CRA designed the Environmental Footprint calculator for our client to track and report their environmental performance in accordance with their targets, based on requirements of relevant guidance documents. The objective was to design a tool that effectively manages, calculates, and reports environmental performance to various stakeholders in a user-friendly format. (author)

Association and Diffusion of Li(+) in Carboxymethylcellulose Solutions for Environmentally Friendly Li-ion Batteries.

Science.gov (United States)

Casalegno, Mosè; Castiglione, Franca; Passarello, Marco; Mele, Andrea; Passerini, Stefano; Raos, Guido

2016-07-21

Carboxymethylcellulose (CMC) has been proposed as a polymeric binder for electrodes in environmentally friendly Li-ion batteries. Its physical properties and interaction with Li(+) ions in water are interesting not only from the point of view of electrode preparation-processability in water is one of the main reasons for its environmental friendliness-but also for its possible application in aqueous Li-ion batteries. We combine molecular dynamics simulations and variable-time pulsed field gradient spin-echo (PFGSE) NMR spectroscopy to investigate Li(+) transport in CMC-based solutions. Both the simulations and experimental results show that, at concentrations at which Li-CMC has a gel-like consistency, the Li(+) diffusion coefficient is still very close to that in water. These Li(+) ions interact preferentially with the carboxylate groups of CMC, giving rise to a rich variety of coordination patterns. However, the diffusion of Li(+) in these systems is essentially unrestricted, with a fast, nanosecond-scale exchange of the ions between CMC and the aqueous environment. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Low Cost Environmental Sensors for Spaceflight: NMP Space Environmental Monitor (SEM) Requirements

Science.gov (United States)

Garrett, Henry B.; Buehler, Martin G.; Brinza, D.; Patel, J. U.

2005-01-01

An outstanding problem in spaceflight is the lack of adequate sensors for monitoring the space environment and its effects on engineering systems. By adequate, we mean low cost in terms of mission impact (e.g., low price, low mass/size, low power, low data rate, and low design impact). The New Millennium Program (NMP) is investigating the development of such a low-cost Space Environmental Monitor (SEM) package for inclusion on its technology validation flights. This effort follows from the need by NMP to characterize the space environment during testing so that potential users can extrapolate the test results to end-use conditions. The immediate objective of this effort is to develop a small diagnostic sensor package that could be obtained from commercial sources. Environments being considered are: contamination, atomic oxygen, ionizing radiation, cosmic radiation, EMI, and temperature. This talk describes the requirements and rational for selecting these environments and reviews a preliminary design that includes a micro-controller data logger with data storage and interfaces to the sensors and spacecraft. If successful, such a sensor package could be the basis of a unique, long term program for monitoring the effects of the space environment on spacecraft systems.

Environmentally friendly cellulose-based polyelectrolytes in wastewater treatment.

Science.gov (United States)

Grenda, Kinga; Arnold, Julien; Gamelas, José A F; Rasteiro, Maria G

2017-09-01

Natural-based polyelectrolytes (PELs), with all the advantages coming from being produced from renewable and biodegradable sources, are a potential solution for the removal of dyes from wastewater. In this work, surplus Eucalyptus bleached cellulose fibres from a paper mill were modified to increase the charge and solubility of cellulose. First, reactive aldehyde groups were introduced in the cellulose backbone by periodate oxidation of cellulose. Further modification with alkylammonium produced positively charged cellulose-based PELs. The final products were characterized by several analytical techniques. The PEL with the highest substitution degree of cationic groups was evaluated for its performance in decolouration processes, bentonite being used as aid. This was found to be effective for colour removal of either anionic or cationic dyes. Bio-PELs can thus be considered as very favourable eco-friendly flocculation agents for decolouration of harsh effluents from several industries, considering their biodegradable nature and thus the ability to produce less sludge.

A fast algorithm for identifying friends-of-friends halos

Science.gov (United States)

Feng, Y.; Modi, C.

2017-07-01

We describe a simple and fast algorithm for identifying friends-of-friends features and prove its correctness. The algorithm avoids unnecessary expensive neighbor queries, uses minimal memory overhead, and rejects slowdown in high over-density regions. We define our algorithm formally based on pair enumeration, a problem that has been heavily studied in fast 2-point correlation codes and our reference implementation employs a dual KD-tree correlation function code. We construct features in a hierarchical tree structure, and use a splay operation to reduce the average cost of identifying the root of a feature from O [ log L ] to O [ 1 ] (L is the size of a feature) without additional memory costs. This reduces the overall time complexity of merging trees from O [ L log L ] to O [ L ] , reducing the number of operations per splay by orders of magnitude. We next introduce a pruning operation that skips merge operations between two fully self-connected KD-tree nodes. This improves the robustness of the algorithm, reducing the number of merge operations in high density peaks from O [δ2 ] to O [ δ ] . We show that for cosmological data set the algorithm eliminates more than half of merge operations for typically used linking lengths b ∼ 0 . 2 (relative to mean separation). Furthermore, our algorithm is extremely simple and easy to implement on top of an existing pair enumeration code, reusing the optimization effort that has been invested in fast correlation function codes.

Environmental dispatch: Minimum cost generation planning for acid rain compliance

International Nuclear Information System (INIS)

Qadri, S.S.; Weinstein, R.E.

1991-01-01

Passage of Public Law 101-549, the 1990 Clean Air Act Amendments, requires reductions in SO 2 and NO x emissions from many power generation stations by 1995, and by an electric utility company's entire generation system by year 2000. Another option to reduce the total environmental emissions is to dispatch generating units with lower emission rates prior to dispatching units with high emission rates. This option may not lower the emission levels to the desired limits, but can reduce emissions. This is practical as long as the added operating cost is modest compared to the cost of alternatives to meet the same levels of emission reduction. This cost can be optimized to provide the best compromise between reduced emissions and operating cost increase. An environmental dispatch algorithm developed by Gilbert/Commonwealth for its eVOLVE-p trademark production costing program makes this optimization possible. The algorithm modifies the traditional economic dispatch order of utility generation to include the impact of the Clean Air Act Amendments. The dispatch order is based on emissions in excess of Clean Air Act compliance limits. A cost is assigned to the excess emissions, and these costs are distributed to the individual generating units in proportion to their emission rates. This paper discusses how this environmental dispatch algorithm is applied for utility generation compliance planning

24 CFR 1000.22 - Are the costs of the environmental review an eligible cost?

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Are the costs of the environmental review an eligible cost? 1000.22 Section 1000.22 Housing and Urban Development Regulations Relating to..., DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT NATIVE AMERICAN HOUSING ACTIVITIES General § 1000.22 Are the...

District heating systems' control for cost effective and environmentally compatible operation

International Nuclear Information System (INIS)

Balati, J.

1999-01-01

District heating systems are being developed in accordance with the growing of large European cities. These systems are formed by enlarging networks of heat distribution from heat sources to heat consumers and, simultaneously, by gradually connecting newly built heat sources. District heating control consists in optimum control of the output of heat sources and in control of heat distribution and consumption. The aim of the paper is to inform about the works in the field of creating a mathematical-physical model of extensive hot water and steam supply circle network and heat sources for the purpose of creating unconventional control algorithms for the complex control of the technological sequence ''heat production distribution- consumption''. For the optimum control algorithms the artificial intelligence methods are also utilised. The aim of the complex access to the solution of new control algorithms will be to decrease the cost of the consumed heat unit and increase environmental protection. The function of the Extensive Heating System District Heating System (DHS) is to ensure permanently the economically justified requirements of heat supply for all consumers with minimum cost per heat supply unit and with enhanced level of environmental protection. The requirements of heat consumers have to be in harmony with the requirements of the maximum possible economy of the whole DHS when adhering to the required qualitative parameters of supplied energy. Therefore, it offers the application of optimised control methods as artificial intelligence methods for the control of the operational circle of DHS heat networks. It is obvious that a higher level of DHS control is required from the technological, economic and ecological point of view. (author)

Innovative eco-friendly bio- solvent for combating sea surface and sedimented oil pollution

Science.gov (United States)

Theodorou, Paraskevas

2017-04-01

The combating of oil spill at sea surface by chemical dispersants accelerates the evaporation and disperse the oil into the water column, where it is broken down by natural processes and/or is sedimented at the sea bottom, especially at near coastal shallow areas, ports and marinas. The usual methodology for cleaning the sedimented oil from the sea bottom is mainly carried out via excavation and dumping of the polluted sediment into deeper sea areas, where the contamination is transferred from one area to another. The eco-friendly bio-solvent MSL Aqua 250 is an innovative new solution based mainly on natural constituents. The action mechanism and the effectiveness of this eco-friendly solvent is based on the high surface tension process. Organic compounds, including hydrocarbons upon coming in contact with MSL Aqua 250 solvent generate a significant surface tension reaction, which is able to alter the organic compounds to liquid form and then to drastically evaporate it. The use of MSL Aqua 250 solvent, both at sea surface and at the bottom, has the following advantages compared to the dispersants: • Efficient solution without transferring the pollution from sea surface to the water column and to the bottom or disturbing the Aquatic Eco System. • Non-Toxic. • Environmentally friendly with a restoration of marine life in the Eco System. • Cost effective. The MSL Aqua 250 solvent has been tested in cooperation with the Cyprus Department of Fisheries and Marine Research and the Technological University of Cyprus and used during the years 2015 and 2016 in marinas and fishing shelters in Cyprus faced oil pollution, with high concentration in the sea water and at the sea bottom of chemical parameters (BOD5, COD, FOG, TKN, TP, TPH), with excellent results.

Online professional development conferences: An effective, economical and eco-friendly option

Directory of Open Access Journals (Sweden)

Lynn Anderson

2010-05-01

Full Text Available In order to stay current within their field, many professionals regularly attend conferences and training events in distant locales. Travel to these conferences costs professionals, and their sponsor organizations, both time and money. In the past the benefits afforded by these conferences, and the lack of comparable alternatives, have provided justification for these expenditures. However, recent studies have shown that the cost of travel extends beyond the pocketbook. Transportation is a major contributor of carbon dioxide (CO2 emissions, a key suspect in the argument for the negative impact of global climate change. This paper examines the potential effects of travel to these conferences on the environment and promotes online conferences as a comparable alternative to face-to-face events. A successful online conference is used to demonstrate the magnitude of the environmental and economical benefits of online conferences. The authors posit that online conferencing technologies have evolved such that they now offer another option for professional development that is effective, economical and environmentally friendly. Résumé : Afin de rester à jour dans leur domaine, de nombreux professionnels participent régulièrement à des colloques et à des activités de formation dans des endroits éloignés. Se déplacer pour assister à de tels congrès ou colloques demande des investissements à la fois en temps et en argent de la part des professionnels et de leurs établissements parrains. Si, par le passé, les bénéfices que procuraient ces colloques et l’absence de solutions de rechange comparables justifiaient de telles dépenses, des études récentes ont toutefois montré que les frais de déplacement s’étendent au-delà des coûts financiers. Les transports constituent une source majeure des émissions de dioxyde de carbone (CO2, un composé soupçonné d’être l’un des facteurs clés de l’impact négatif de l’humain sur le

Environmental cost-effectiveness of bio diesel production in Greece: Current policies and alternative scenarios

International Nuclear Information System (INIS)

Iliopoulos, Constantine; Rozakis, Stelios

2010-01-01

Following European Directive 2003/30/EC, the Greek Government adapted legislation that introduces and regulates the bio diesel market. The implemented quota scheme allocates the country's annual, predetermined, tax exempt production of bio diesel to industries based on their ability to meet several criteria. A number of bio diesel supply chain stakeholders have criticized this policy for being efficiency-robbing and vague. This paper uses 2007 data from energy crop farms and three bio diesel-producing companies in order to assess these criticisms. We study the economic and environmental aspects of the currently adopted policy and compare them to three alternative scenarios. We conclude that such criticisms have a merit and that policy makers need to reconsider their alternative options regarding the promotion of bio diesel in transport. Permission of sales directly to local consumers and promotion of forward integration by farmers are efficiency enhancing and environment-friendly means of promoting the use of bio diesel in transport.

Awareness of external costs - helps to improve environmental protection. The methodological convention for estimates of environmental externalities: the energy and transport sectors as examples; Externe Kosten kennen - Umwelt besser schuetzen. Die Methodenkonvention zur Schaetzung externer Kosten am Beispiel Energie und Verkehr

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-04-15

citizens will have to face higher financial burdens in the form of higher taxes or charges. Fair cost recovery may also be achieved for example by reducing environmentally harmful subsidies and by partly shifting the money saved to support more eco-friendly technologies. (orig.)

A cost/schedule and control system for the environmental restoration program Albuquerque Field Office

International Nuclear Information System (INIS)

Fiske, Wanda S.; Bischoff, Edward L.; Rea, Kenneth H.; Dwain Farley, P.; Biedermann, Charles A.

1992-01-01

The Department of Energy (DOE) Field Office Albuquerque (AL), Environmental Restoration Project Office (ERPO), has developed a project management system used to plan, document, and control Environmental Restoration (ER) work at eight installations and one superfund site managed by AL. This system emphasizes control of the cost, schedule, and technical elements of the Program. It supports programmatic documentation such as the Environmental Restoration/Waste Management Five-Year Plan, Site Specific Plan, and budget requests. The System provides information used to manage the ER Program at all levels of management (i.e., from low-level day-to-day activities to high-level upper management). The System requires substantial effort to ensure reliability; however, the benefit to ERPO is an effective, proactive project management tool. This paper provides an overview of the ERPO System, an explanation of how it is implemented, and lessons learned from this process. Application of the System to cost estimating, annual and five-year budget preparation, resource projections, scheduling, and cost/schedule performance measurement is discussed. Also discussed are cost/schedule review procedures, along with variance identification and resolution. Examples are taken from the Pinellas ER Program. (author)

Exploratory benefit-cost analysis of environmental controls on hydrothermal energy

Energy Technology Data Exchange (ETDEWEB)

Scott, M.J.; Wells, K.D.; Currie, J.W.; King, M.J.

1981-02-01

A study of the value of environmental benefits generated by environmental regulation of hydrothermal sites was initiated to compare these benefits with the estimated costs of regulation. Primary objectives were to 1) evaluate the environmental damages caused by unregulated hydrothermal resource development, 2) use existing environmental and economic data to estimate the dollar value of preventing expected environmental damages at two sites, and 3) compare the benefits and costs of preventing the damages. The sites chosen for analyses were in the Imperial Valley at Heber and Niland, California. Reasons for this choice were 1) there is a high level of commercial interest in developing the Heber known geothermal resource area (KGRA) and the Salton Sea KGRA; 2) the potential for environmental damage is high; 3) existing data bases for these two sites are more comprehensive than at other sites. The primary impacts analyzed were those related to hydrogen sulfide (H/sub 2/S) emissions and those related to disposal of spent hydrothermal brine. (MHR)

Development and Pilot Testing of a Bilingual Environmental Health Assessment Tool to Promote Asthma-friendly Childcares.

Science.gov (United States)

Evans-Agnew, Robin A; Postma, Julie; Camacho, Ariana Ochoa; Hershberg, Rachel M; Trujilio, Elsa; Tinajera, Maria

2018-01-01

Childhood marks the highest risk for allergic sensitization to asthma triggers. Hispanic/Latino children are at higher risk for hospitalization for asthma than non-Hispanic White children. Childcare providers lack knowledge about reducing asthma triggers. The purpose of this paper is to describe a community-based participatory research (CBPR) initiative aimed at developing and pilot testing a bilingual walk-through assessment tool for asthma-friendly childcare environments. Ten Latina mothers of children with asthma living in the Pacific Northwest collaborated with research partners to develop and pilot test a Childcare Environmental Health (CEH) assessment walk-through survey.Results and Lessons Learned: The women innovated the survey with photography and structural examinations of stress and provision of basic needs. The survey tool identified environmental threats to asthma in all three childcares surveyed. Parents are well-positioned to build trust with childcare providers, assess asthma triggers, and recommend practical mitigation strategies.

Cost/benefit analyses of environmental impact

International Nuclear Information System (INIS)

Goldman, M.I.

1974-01-01

Various aspects of cost-benefit analyses are considered. Some topics discussed are: regulations of the National Environmental Policy Act (NEPA); statement of AEC policy and procedures for implementation of NEPA; Calvert Cliffs decision; AEC Regulatory Guide; application of risk-benefit analysis to nuclear power; application of the as low as practicable (ALAP) rule to radiation discharges; thermal discharge restrictions proposed by EPA under the 1972 Amendment to the Water Pollution Control Act; estimates of somatic and genetic insult per unit population exposure; occupational exposure; EPA Point Source Guidelines for Discharges from Steam Electric Power Plants; and costs of closed-cycle cooling using cooling towers. (U.S.)

Environmental dependency in the expression of costs of tolerance to deer herbivory.

Science.gov (United States)

Stinchcombe, John R

2002-05-01

Plant tolerance to natural enemy damage is a defense strategy that minimizes the effects of damage on fitness. Despite the apparent benefits of tolerance, many populations exhibit intermediate levels of tolerance, indicating that constraints on the evolution of tolerance are likely. In a field experiment with the ivyleaf morning glory, costs of tolerance to deer herbivory in the form of negative genetic correlations between deer tolerance and fitness in the absence of damage were detected. However, these costs were detected only in the presence of insect herbivores. Such environmental dependency in the expression of costs of tolerance may facilitate the maintenance of tolerance at intermediate levels.

Rugged, Low Cost, Environmental Sensors for a Turbulent World

Science.gov (United States)

Schulz, B.; Sandell, C. T.; Wickert, A. D.

2017-12-01

Ongoing scientific research and resource management require a diverse range of high-quality and low-cost sensors to maximize the number and type of measurements that can be obtained. To accomplish this, we have developed a series of diversified sensors for common environmental applications. The TP-DownHole is an ultra-compact temperature and pressure sensor designed for use in CMT (Continuous Multi-channel Tubing) multi-level wells. Its 1 mm water depth resolution, 30 cm altitude resolution, and rugged design make it ideal for both water level measurements and monitoring barometric pressure and associated temperature changes. The TP-DownHole sensor has also been incorporated into a self-contained, fully independent data recorder for extreme and remote environments. This device (the TP-Solo) is based around the TP-DownHole design, but has self-contained power and data storage and is designed to collect data independently for up to 6 months (logging at once an hour), creating a specialized tool for extreme environment data collection. To gather spectral information, we have also developed a very low cost photodiode-based Lux sensor to measure spectral irradiance; while this does not measure the entire solar radiation spectrum, simple modeling to rescale the remainder of the solar spectrum makes this a cost-effective alternative to a thermopile pyranometer. Lastly, we have developed an instrumentation amplifier which is designed to interface a wide range of sensitive instruments to common data logging systems, such as thermopile pyranometers, thermocouples, and many other analog output sensors. These three instruments are the first in a diverse family aimed to give researchers a set of powerful and low-cost tools for environmental instrumentation.

Getting to Family-Friendly in Your Department

Science.gov (United States)

Pilachowski, Catherine A.

2012-01-01

These days, most academic and research institutions recognize the importance of a family-friendly workplace, and have implemented at least some policies to support a sustainable work-life balance: family and medical leave, parental leave, stopping or extending tenure clocks, modified duty policies, breast feeding policies and lactation rooms, partner hiring programs, childcare programs, eldercare programs, emergency and sick child care programs, dependent care travel funds, etc. But while institutions may offer a menu of policies and free or low-cost services to support families, what's happening in your department? Achieving a supportive workplace culture requires that we dispel some of the myths associated with family-friendly policies, and establish that family-friendly policies not only benefit all employees, but also help the institution be more successful.

Conceptualizing age-friendly community characteristics in a sample of urban elders: an exploratory factor analysis.

Science.gov (United States)

Smith, Richard J; Lehning, Amanda J; Dunkle, Ruth E

2013-01-01

Accurate conceptualization and measurement of age-friendly community characteristics would help to reduce barriers to documenting the effects on elders of interventions to create such communities. This article contributes to the measurement of age-friendly communities through an exploratory factor analysis of items reflecting an existing US Environmental Protection Agency policy framework. From a sample of urban elders (n = 1,376), we identified 6 factors associated with demographic and health characteristics: access to business and leisure, social interaction, access to health care, neighborhood problems, social support, and community engagement. Future research should explore the effects of these factors across contexts and populations.

Nutritional, Economic, and Environmental Costs of Milk Waste in a Classroom School Breakfast Program.

Science.gov (United States)

Blondin, Stacy A; Cash, Sean B; Goldberg, Jeanne P; Griffin, Timothy S; Economos, Christina D

2017-04-01

To measure fluid milk waste in a US School Breakfast in the Classroom Program and estimate its nutritional, economic, and environmental effects. Fluid milk waste was directly measured on 60 elementary school classroom days in a medium-sized, urban district. The US Department of Agriculture nutrition database, district cost data, and carbon dioxide equivalent (CO 2 e) emissions and water footprint estimates for fluid milk were used to calculate the associated nutritional, economic, and environmental costs. Of the total milk offered to School Breakfast Program participants, 45% was wasted. A considerably smaller portion of served milk was wasted (26%). The amount of milk wasted translated into 27% of vitamin D and 41% of calcium required of School Breakfast Program meals. The economic and environmental costs amounted to an estimated $274 782 (16% of the district's total annual School Breakfast Program food expenditures), 644 893 kilograms of CO 2 e, and 192 260 155 liters of water over the school year in the district. These substantial effects of milk waste undermine the School Breakfast Program's capacity to ensure short- and long-term food security and federal food waste reduction targets. Interventions that reduce waste are urgently needed.

Sulfide ore looping oxidation : an innovative process that is energy efficient and environmentally friendly

Energy Technology Data Exchange (ETDEWEB)

McHugh, L.F.; Balliett, R.; Mozolic, J.A. [Orchard Material Technology, North Andover, MA (United States)

2008-07-01

Many sulphide ore processing methods use different types of roasting technologies. These technologies are generally quite effective, however, they represent significant energy use and environmental cost. This paper discussed and validated the use of a two-step looping oxidation process that effectively removes sulphur while producing materials of adequate purity in an energy efficient and environmentally sound manner. This paper described the process in detail and compared it to existing technologies in the area of energy efficiency, and off-gas treatment energy requirements. Validation of the looping oxidation concept was described and the starting chemistries of each chemical were listed. Thermodynamic modeling was used to determine the temperature at which the reaction should begin and to predict the temperature at which the reaction should be complete. The test apparatus and run conditions were also described. It was concluded that there are several critical stages in the looping process where energy recovery is economically attractive and could easily be directed or converted for other plant operations. All reactions were fast and efficient, allowing for reduced equipment size as well as higher throughput rates. 11 refs., 3 tabs., 2 figs.

A probabilistic approach to cost and duration uncertainties in environmental decisions

International Nuclear Information System (INIS)

Boak, D.M.; Painton, L.

1996-01-01

Sandia National Laboratories has developed a method for analyzing life-cycle costs using probabilistic cost forecasting and utility theory to determine the most cost-effective alternatives for safe interim storage of radioactive materials. The method explicitly incorporates uncertainties in cost and storage duration by (1) treating uncertain component costs as random variables represented by probability distributions, (2) treating uncertain durations as chance nodes in a decision tree, and (3) using stochastic simulation tools to generate life-cycle cost forecasts for each storage alternative. The method applies utility functions to the forecasted costs to incorporate the decision maker's risk preferences, making it possible to compare alternatives on the basis of both cost and cost utility. Finally, the method is used to help identify key contributors to the uncertainty in forecasted costs to focus efforts aimed at reducing cost uncertainties. Where significant cost and duration uncertainties exist, and where programmatic decisions must be made despite these uncertainties, probabilistic forecasting techniques can yield important insights into decision alternatives, especially when used as part of a larger decision analysis framework and when properly balanced with deterministic analyses. Although the method is built around an interim storage example, it is potentially applicable to many other environmental decision problems

Biotechnology for uranium extraction and environmental control

International Nuclear Information System (INIS)

Natarajan, K.A.

2012-01-01

India is looking forward to augmenting mining and extraction of uranium mineral for its nuclear energy needs. Being a radio-active mineral, mining and processing of uranium ore deposits need be carried out in an environmentally acceptable fashion. In this respect, a biotechnological approach holds great promise since it is environment-friendly, cost-effective and energy-efficient. There are several types of microorganisms which inhabit uranium ore bodies and biogenesis plays an important role in the mineralisation and transport of uranium-bearing minerals under the earth's crust. Uranium occurrences in India are only meagre and it becomes essential to tap effectively all the available resources. Uraninite and pitchblende occurring along with sulfide mineralisation such as pyrite are ideal candidates for bioleaching. Acidithiobacillus ferrooxidans present ubiquitously in the ore deposits can be isolated, cultured and utilised to bring about efficient acidic dissolution of uranium. Many such commercial attempts to extract uranium from even lean ores using acidophilic autotrophic bacteria have been made in different parts of the world. Anaerobes such a Geobacter and Sulfate Reducing Bacteria (SRB) can be effectively used in uranium mining for environmental control. Radioactive uranium mined wastes and tailing dumps can be cleaned and protected using microorganisms. In this lecture use of biotechnology in uranium extraction and bioremediation is illustrated with practical examples. Applicability of environment-friendly biotechnology for mining and extraction of uranium from Indian deposits is outlined. Commercial potentials for bioremediation in uranium-containing wastes are emphasised. (author)

Environmental balance of mining from seafloor

International Nuclear Information System (INIS)

Gomaa, Ehab Elsayed

2013-01-01

The underwater mining has increased in the recent years and the growing awareness of the potential impacts on the environment, as results of increasing the encroachment on the marine environment. Therefore, the debate has increased about how to protect this environment by using the scientific research thats relevant to the various environmental effects and developing the equipment used in dredging. There is a wide diversity of underwater mining equipments, such as continuous and non-continuous dredging which used for production of sand, gravel, alluvial deposits and raw material. There are a relation between increasingly dredging activities in the recent years and their impacts on the aquatic environment. These impacts are causes by changes in the topography of the sea floor such as turbidity, noise and other environmental impacts. Today, there is an international framework of legislation which has been developed for dredging projects. This contains rules and regulations which must be followed by mining companies and have to implemented by national authorities. The European countries also develop their legislation to control on the dredged material which deposit on land and sea. This legislation is constantly changing related to scientific knowledge and increasing the implementation frameworks. Also, the people become more sensitive to emissions that have a negative attitude towards dredging in the neighborhood. In addition, dredging techniques give rise to objections, which eventually led to think in more environmentally-friendly production methods. After that, the use of dredger is the only alternative in some project. The question is what are the true benefits of these techniques and what is the relation between possible improvements and technological potential as well as the costs. Therefore, it is intended to assess mining techniques in the context of their environmental impact and the costs. There are many systematic approaches which have been used for

Environmental balance of mining from seafloor

Energy Technology Data Exchange (ETDEWEB)

Gomaa, Ehab Elsayed

2013-09-30

The underwater mining has increased in the recent years and the growing awareness of the potential impacts on the environment, as results of increasing the encroachment on the marine environment. Therefore, the debate has increased about how to protect this environment by using the scientific research thats relevant to the various environmental effects and developing the equipment used in dredging. There is a wide diversity of underwater mining equipments, such as continuous and non-continuous dredging which used for production of sand, gravel, alluvial deposits and raw material. There are a relation between increasingly dredging activities in the recent years and their impacts on the aquatic environment. These impacts are causes by changes in the topography of the sea floor such as turbidity, noise and other environmental impacts. Today, there is an international framework of legislation which has been developed for dredging projects. This contains rules and regulations which must be followed by mining companies and have to implemented by national authorities. The European countries also develop their legislation to control on the dredged material which deposit on land and sea. This legislation is constantly changing related to scientific knowledge and increasing the implementation frameworks. Also, the people become more sensitive to emissions that have a negative attitude towards dredging in the neighborhood. In addition, dredging techniques give rise to objections, which eventually led to think in more environmentally-friendly production methods. After that, the use of dredger is the only alternative in some project. The question is what are the true benefits of these techniques and what is the relation between possible improvements and technological potential as well as the costs. Therefore, it is intended to assess mining techniques in the context of their environmental impact and the costs. There are many systematic approaches which have been used for

New ADAC centre cools and heats environmental-friendly. Concrete core tempering; Neue ADAC-Zentrale kuehlt und heizt umweltvertraeglich. Betonkerntemperierung

Energy Technology Data Exchange (ETDEWEB)

Anon,

2010-12-15

At present, the new centre of the General German Automobile Association (ADAC) arises in Munich's suburb Sendling/Westpark. In summer 2011, nearly 2,400 coworkers of ADAC so far distributed over six locations in Munich shall work together in the new office building. So that they feel well in this new building, Rehau AG (Rehau, Federal Republic of Germany) supplies an environmental-friendly heating and cooling of the building by means of concrete core tempering.

A cost effective method for the determination of 210Po and 210Pb in environmental materials

International Nuclear Information System (INIS)

Clayton, R.F.; Bradley, E.J.

1995-01-01

The majority of the methods for the determination of 210 Pb and 210 Po in environmental materials were developed in the 1960s. However, with the advances in technology since that time, particularly in the areas of ion-exchange chromatography and instrumentation, new methods may be more appropriate to measure these radionuclides in environmental media such as foodstuffs. A review was conducted of potentially suitable methods. Four methods were selected for detailed evaluation on the basis of cost and sensitivity. A cheap, sensitive and simple method is recommended for the analysis of 210 Pb and 210 Po in environmental materials

Analisa Perbedaan Eco-friendly Attitude Dan Eco-friendly Intention Antara Turis Lokal Dan Turis Asing Terhadap Green

OpenAIRE

Jokom, Regina; Kristanti, Monika

2014-01-01

The increasing concern for environmental degradation caused many people to pay more attention to the green practice in the industry including hotel. Majority of hotel chains have adopted environmental programs and labeled as green hotel. This study examines the significant differences between local tourist and foreign tourist regarding ecofriendly attitude and eco-friendly intention toward green hotel. Questionnaires were distributed to 120 localtourists and 120 foreign tourists In Juanda...

The environmental cost in the mining projects

International Nuclear Information System (INIS)

Gaviria Rivera Antonio

1992-01-01

To evaluate and calculate the mining project, Environmental costs, besides the proper variables concerning the project. It is necessary to incorporate the distinct interrelations among the mining operation with the local and regional biophysics and. socio-economic environments existing in the project's area of influence

Effect on Baby-Friendly Hospital Steps When Hospitals Implement a Policy to Pay for Infant Formula.

Science.gov (United States)

Tarrant, Marie; Lok, Kris Y W; Fong, Daniel Y T; Wu, Kendra M; Lee, Irene L Y; Sham, Alice; Lam, Christine; Bai, Dorothy Li; Wong, Ka Lun; Wong, Emmy M Y; Chan, Noel P T; Dodgson, Joan E

2016-05-01

The Baby-Friendly Hospital Initiative requires hospitals to pay market price for infant formula. No studies have specifically examined the effect of hospitals paying for infant formula on breastfeeding mothers' exposure to Baby-Friendly steps. To investigate the effect of hospitals implementing a policy of paying for infant formula on new mothers' exposure to Baby-Friendly steps and examine the effect of exposure to Baby-Friendly steps on breastfeeding rates. We used a repeated prospective cohort study design. We recruited 2 cohorts of breastfeeding mother-infant pairs (n = 2470) in the immediate postnatal period from 4 Hong Kong public hospitals and followed them by telephone up to 12 months postpartum. We assessed participants' exposure to 6 Baby-Friendly steps by extracting data from the medical record and by maternal self-report. After hospitals began paying for infant formula, new mothers were more likely to experience 4 out of 6 Baby-Friendly steps. Breastfeeding initiation within the first hour increased from 28.7% to 45%, and in-hospital exclusive breastfeeding rates increased from 17.9% to 41.4%. The proportion of mothers who experienced all 6 Baby-Friendly steps increased from 4.8% to 20.5%. The risk of weaning was progressively higher among participants experiencing fewer Baby-Friendly steps. Each additional step experienced by new mothers decreased the risk of breastfeeding cessation by 8% (hazard ratio = 0.92; 95% CI, 0.89-0.95). After implementing a policy of paying for infant formula, breastfeeding mothers were exposed to more Baby-Friendly steps, and exposure to more steps was significantly associated with a lower risk of breastfeeding cessation. © The Author(s) 2015.

Dutch environmental policy up for revision. Towards a cost-effective, sustainable society. Part 1

International Nuclear Information System (INIS)

Van Dorp, H.W.; Schmitz, H.

2009-01-01

In a series of two articles an important energy formula is used to discuss current Dutch environmental policy and calculations are made based on 7.2 million dwellings. Normally, everyone who has an opinion on energy and carbon dioxide emissions should know this formula and be able to apply it. The second article discusses climate policy and provides a comparison of the social cost at new housing level for both policy lines. More specifically, the investment effectiveness of carbon dioxide in the soil near Barendrecht and Geleen is discussed as well as the annual investments in the 220 and 380 kV high tension grid. Moreover, some recommendations and necessary policy adjustments to strengthen the competitive edge of the SMB compared to large energy companies and to realize an affordable and sustainable society are provided [nl

Fuzzy ABC: modeling the uncertainty in environmental cost allocation

OpenAIRE

Borba, José Alonso; Murcia, Fernando Dal Ri; Maior, Cesar Duarte Souto

2007-01-01

In many cases, preventing pollution and environmental destruction is cheaper than remedying these damages. In this sense, environmental cost allocation enables a better visualization and analysis of a product's profitability. However, the environmental allocation process involves estimated information and assumes linearity between activity consumption and product that is not real in many cases. In order to handle this not-linearity, this research presents a methodology based on fuzzy logic co...

Cost-effectiveness and cost-benefit analysis of BMPs in controlling agricultural nonpoint source pollution in China based on the SWAT model.

Science.gov (United States)

Liu, Ruimin; Zhang, Peipei; Wang, Xiujuan; Wang, Jiawei; Yu, Wenwen; Shen, Zhenyao

2014-12-01

Best management practices (BMPs) have been widely used in managing agricultural nonpoint source pollution (ANSP) at the watershed level. Most BMPs are related to land use, tillage management, and fertilizer levels. In total, seven BMP scenarios (Reforest1, Reforest2, No Tillage, Contour tillage, and fertilizer level 1-4) that are related to these three factors were estimated in this study. The objectives were to investigate the effectiveness and cost-benefit of these BMPs on ANSP reduction in a large tributary of the Three Gorges Reservoir (TGR) in China, which are based on the simulation results of the Soil and Water Assessment Tool (SWAT) model. The results indicated that reforestation was the most economically efficient of all BMPs, and its net benefits were up to CNY 4.36×10(7) years(-1) (about USD 7.08×10(6) years(-1)). Regarding tillage practices, no tillage practice was more environmentally friendly than other tillage practices, and contour tillage was more economically efficient. Reducing the local fertilizer level to 0.8-fold less than that of 2010 can yield a satisfactory environmental and economic efficiency. Reforestation and fertilizer management were more effective in reducing total phosphorus (TP), whereas tillage management was more effective in reducing total nitrogen (TN). When CNY 10,000 (about USD 162) was applied to reforestation, no tillage, contour tillage, and an 0.8-fold reduction in the fertilizer level, then annual TN load can be reduced by 0.08, 0.16, 0.11, and 0.04 t and annual TP load can be reduced by 0.04, 0.02, 0.01 and 0.03 t, respectively. The cost-benefit (CB) ratios of the BMPs were as follows: reforestation (207 %) > contour tillage (129 %) > no tillage (114 %) > fertilizer management (96 and 89 %). The most economical and effective BMPs can be designated as follows: BMP1 (returning arable land with slopes greater than 25° to forests and those lands with slopes of 15-25° to orchards), BMP2 (implementing no tillage

Analisa Eco-friendly Attitudes Dan Eco-friendly Behavior Terhadap Eco-friendly Intention Green Hotel Di Indonesia

OpenAIRE

Silvia, Lanny; Rudijanto, Diana Gabriela; Kristanti, Monika

2017-01-01

Kesadaran masyarakat akan lingkungan yang semakin meningkat membuat masyarakat gencar mencari hotel yang ramah lingkungan dibandingkan dengan hotel konvensional. Penelitian ini bertujuan untuk mengetahui perbedaan eco-friendly attitude, eco- friendly behavior, dan eco-friendly intention konsumen generasi x dan generasi y terhadap green hotel di Indonesia dan apakah eco-friendly attitudes dan eco-friendly behavior berpengaruh signifikan terhadap eco-friendly intention. Total responden dalam pe...

Bio-production of Baccatin III, an Important Precursor of Paclitaxel by a Cost-Effective Approach.

Science.gov (United States)

Lin, Shu-Ling; Wei, Tao; Lin, Jun-Fang; Guo, Li-Qiong; Wu, Guang-Pei; Wei, Jun-Bin; Huang, Jia-Jun; Ouyang, Ping-Lan

2018-07-01

Natural production of anti-cancer drug taxol from Taxus has proved to be environmentally unsustainable and economically unfeasible. Currently, bioengineering the biosynthetic pathway of taxol is an attractive alternative production approach. 10-deacetylbaccatin III-10-O-acetyl transferase (DBAT) was previously characterized as an acyltransferase, using 10-deacetylbaccatin III (10-DAB) and acetyl CoA as natural substrates, to form baccatin III in the taxol biosynthesis. Here, we report that other than the natural acetyl CoA (Ac-CoA) substrate, DBAT can also utilize vinyl acetate (VA), which is commercially available at very low cost, acylate quickly and irreversibly, as acetyl donor in the acyl transfer reaction to produce baccatin III. Furthermore, mutants were prepared via a semi-rational design in this work. A double mutant, I43S/D390R was constructed to combine the positive effects of the different single mutations on catalytic activity, and its catalytic efficiency towards 10-DAB and VA was successfully improved by 3.30-fold, compared to that of wild-type DBAT, while 2.99-fold higher than the catalytic efficiency of WT DBAT towards 10-DAB and Ac-CoA. These findings can provide a promising economically and environmentally friendly method for exploring novel acyl donors to engineer natural product pathways.

Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in the Philippines; Kankyo chowagata sekitan riyo system kanosei chosa. Philippines ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Grasping the present situation of coal utilization technology in the Philippines, the paper proposed a feasibility study of introduction of the environmentally friendly type coal utilization system which seems to be needed in the future. (1) Introduction of the environmentally friendly type coal utilization system in the electric power generation sector: there are only four full-scale running coal thermal power plants in the Philippines. In the future, several coal thermal plants are planned to be constructed by 2005, but for the new installation, it is desirable to adopt fluidized bed boilers with wide application to coal kinds. In case of 0.3-1.0 million MW class plants, it is planned to adopt high grade import coals, and it will be natural to fire pulverized coal. For the processing of flue gas, it is a must to install desulfurization facilities and smoke/soot removal devices. (2) Utilization/development of domestic low grade coals: at the mine-mouth generating plant, it is necessary to investigate the economically minable amount of coal, confirm productivity, survey coal quality, etc., and select boiler. As to coal briquetting technology, it is necessary to examine coal quality for tests and make a thorough study of what technology is most suitable. 50 figs., 78 tabs.

Environmentally Friendly Consumer

DEFF Research Database (Denmark)

Reijonen, Satu

2011-01-01

on the green consumer: cultural determinism, psycho-socio-demographic determinism and calculative determinism. An explanation of the green consumer in these terms, however, loses sight of the emergence and processuality of consumer behaviour. Process oriented constructionism, by contrast, is useful to recover...... these important aspects. This paper suggests a research agenda focused on socio-material processes and situated actions that lead to the emergence and stabilization of a particular type of consumer behaviour.......Several attempts have been made by academics in the past to explain the so-called ‘environmentally conscious’ consumer. These explanations share an important feature, namely determinism. This paper identifies three different sources of determinism that are distinguished in recent literature...

Guidelines for defining and documenting data on costs of possible environmental protection measures

Energy Technology Data Exchange (ETDEWEB)

Marlowe, I.; King, K.; Boyd, R.; Bouscaren, R.; Pacyna, J. [AEA Technology Environment, Harwell (United Kingdom)

1999-07-01

The Guidelines are intended to promote good practice in the documenting and use of data on the costs of possible environmental protection measures in the context of international data comparisons. The minimum information needed to describe the cost of an environmental protection measures is: details of pollution source; details of the environmental protection measure and its performance characteristics; how costs are defined; the year to which data apply; indications of data uncertainty; how pollutants are defined; and reference to data sources. Guidelines are given for these seven items. These are followed by descriptions of various methods of data processing - dealing with information; calculating annual costs; discount/interest rates; and additional issues relating to the implementation of cost data. 16 refs., 5 tabs., 6 apps.

Cost-time management for environmental restoration activities at the Department of Energy's Idaho National Engineering Laboratory, Idaho Chemical Processing Plant

International Nuclear Information System (INIS)

Fourr, B.R.; Owen, A.H.; Williamson, D.J.; Nash, C.L.

1992-01-01

Cost-time management methods have been developed by Westinghouse to examine business applications from a cost-time perspective. The initial application of cost-time management within Westinghouse was targeted at reducing cycle time in the manufacturing sector. As a result of the tremendous success of reduced cycle time in manufacturing, Westinghouse initiated application of the management technique to Environmental Restoration activities at its Government Owned Contractor Operated facilities. The Westinghouse initiative was proposed in support of the Department of Energy's goals for cost effective Environmental Restoration activities. This paper describes the application of the cost-time method to Environmental Restoration work currently being performed at the Idaho National Engineering Laboratory (INEL) for the Department of Energy (DOE) by Westinghouse Idaho Nuclear Company (WINCO)

Moral intensity and climate-friendly food choices.

Science.gov (United States)

Mäkiniemi, Jaana-Piia; Vainio, Annukka

2013-07-01

By changing individual food consumption patterns, it might be possible to reduce greenhouse gas emissions associated with climate change. The aim of the current study was to examine how perceptions of the moral intensity of climate change are related to climate friendly-food choices. The participants were 350 Finnish university students in the social and behavioral sciences who completed a questionnaire during class. The results indicated that moral perceptions mainly affected the moral evaluation and intentions to make climate-friendly food choices. We suggest that the results can be used to promote climate-friendly food choices, for example, by increasing the recognition of climate change as a moral imperative and by combining environmental motives with other relevant food choice motives. Copyright © 2013 Elsevier Ltd. All rights reserved.

Candidate eco-friendly gas mixtures for MPGDs

Science.gov (United States)

Benussi, L.; Bianco, S.; Saviano, G.; Muhammad, S.; Piccolo, D.; Ferrini, M.; Parvis, M.; Grassini, S.; Colafranceschi, S.; Kjølbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.

2018-02-01

Modern gas detectors for detection of particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This review studies properties of potential eco-friendly gas candidate replacements.

Innovative Methodological Approaches for evaluating the Magnetocaloric Effect in Functional Materials

OpenAIRE

Cugini, Francesco

2018-01-01

The experimental characterization of magnetocaloric effect has a fundamental role in the development of an efficient, environmentally friendly and cost-effective room-temperature magnetic refrigeration technology. The proper measure of the magnetocaloric effect as a function of temperature and magnetic field, in terms of adiabatic temperature change and isothermal entropy change, is required to compare the potentiality of different materials and to lead to their development. Moreover, the tes...

The environmental costs of wind energy in Spain

Energy Technology Data Exchange (ETDEWEB)

Linares Llamas, P [CIEMAT-IEE, Madrid (Spain)

1996-12-31

This article summarizes the assessment of the environmental costs of the wind fuel cycle in Spain. It has been carried out within the ExternE project of the European Commission, and so it has been done following a site-, technology-specific methodology. The main impacts identified have been noise, and the loss of visual amenity. As a result some values for the external costs of wind energy have been obtained, which have shown to be much lower than those of conventional fuel cycles. It is also important to note that careful planning would avoid most of these costs. (author)

The environmental costs of wind energy in Spain

Energy Technology Data Exchange (ETDEWEB)

Linares Llamas, P. [CIEMAT-IEE, Madrid (Spain)

1995-12-31

This article summarizes the assessment of the environmental costs of the wind fuel cycle in Spain. It has been carried out within the ExternE project of the European Commission, and so it has been done following a site-, technology-specific methodology. The main impacts identified have been noise, and the loss of visual amenity. As a result some values for the external costs of wind energy have been obtained, which have shown to be much lower than those of conventional fuel cycles. It is also important to note that careful planning would avoid most of these costs. (author)

Development of Environment-Friendly Insecticides Based on Enantioselectivity: Bifenthrin as a Case.

Science.gov (United States)

Qian, Yi; Zhou, Peixue; Zhang, Quan

2017-01-01

Chiral insecticides significantly contribute to the environmental pollutions recently. As the development of industry and agriculture, increasing number of chiral insecticides are to be introduced into the market. However, their enantioselective toxicology to ecosystem still remains uncertain. In this review, we embarked on a structured search of bibliographic databases for peer-reviewed articles regarding the enantioselective effects of bifenthrin, a typical chiral insecticide, on both target and non-target species. With this enantioselective property of chiral insecticides, they often exhibit adverse effects on non-target species enantioselectively. Specifically, the enantioselective effects of bifenthrin on target and non-target organisms were discussed. In target species, R-bifenthrin exerts more significant activities in deinsectization, compared with S-bifenthrin. On the other hand, Sbifenthrin is more toxic to non-target species than R-bifenthrin, which suggests that the application of sole enantiomer is more efficient and environment-friendly than that of racemate. This review confirms the choice of environment-friendly insecticides from the perspective of the enantioselectivity of chiral insecticides. To make insecticides more efficient to target species and less toxic to non-target species, further research should be done to investigated the potential effects of targetactive enantiomers on non-target organisms as well as the enantioselective fate of enantiomers in multiple environmental matrix.

Towards an intermittency-friendly energy system: Comparing electric boilers and heat pumps in distributed cogeneration

International Nuclear Information System (INIS)

Blarke, Morten B.

2012-01-01

Highlights: ► We propose an “intermittency-friendly” energy system design. ► We compare intermittency-friendly concepts in distributed cogeneration. ► We investigate a new concept involving a heat pump and intermediate cold storage. ► We find significant improvements in operational intermittency-friendliness. ► Well-designed heat pump concepts are more cost-effective than electric boilers. -- Abstract: Distributed cogeneration has played a key role in the implementation of sustainable energy policies for three decades. However, increasing penetration levels of intermittent renewables is challenging that position. The paradigmatic case of West Denmark indicates that distributed operators are capitulating as wind power penetration levels are moving above 25%; some operators are retiring cogeneration units entirely, while other operators are making way for heat-only boilers. This development is jeopardizing the system-wide energy, economic, and environmental benefits that distributed cogeneration still has to offer. The solution is for distributed operators to adapt their technology and operational strategies to achieve a better co-existence between cogeneration and wind power. Four options for doing so are analysed including a new concept that integrates a high pressure compression heat pump using low-temperature heat recovered from flue gasses in combination with an intermediate cold storage, which enables the independent operation of heat pump and cogenerator. It is found that an electric boiler provides consistent improvements in the intermittency-friendliness of distributed cogeneration. However, well-designed heat pump concepts are more cost-effective than electric boilers, and in future markets where the gas/electricity price ratio is likely to increase, compression heat pumps in combination with intermediate thermal storages represent a superior potential for combining an intermittency-friendly pattern of operation with the efficient use of

NASA's Beachside Corrosion Test Site and Current Environmentally Friendly Corrosion Control Initiatives

Science.gov (United States)

Russell, Richard W.; Calle, Luz Marina; Johnston, Frederick; Montgomery, Eliza L.; Curran, Jerome P.; Kolody, Mark R.

2013-01-01

NASA began corrosion studies at the Kennedy Space Center (KSC) in 1966 during the Gemini/Apollo Programs with the evaluation of long-term corrosion protective coatings for carbon steel. KSC's Beachside Corrosion Test Site (BCTS), which has been documented by the American Society of Materials (ASM) as one of the most corrosive, naturally occurring, environments in the world, was established at that time. With the introduction of the Space Shuttle in 1981, the already highly corrosive conditions at the launch pad were rendered even more severe by the acid ic exhaust from the solid rocket boosters. In the years that followed, numerous studies have identified materials, coatings, and maintenance procedures for launch hardware and equipment exposed to the highly corrosive environment at the launch pad. This paper presents a historical overview of over 45 years of corrosion and coating evaluation studies and a description of the BCTS's current capabilities. Additionally, current research and testing programs involving chromium free coatings, environmentally friendly corrosion preventative compounds, and alternates to nitric acid passivation will be discussed.

Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (feasibility study of the environmentally friendly type coal utilization system in India); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Indo ni okeru kankyo chowagata sekitan riyo system kanosei chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The survey was conducted of the present situation of coal utilization and the present coal situation such as the environmental state of India which is a coal producing/consuming country next to China in Asia. The paper studied a feasibility of the introduction of the environmental friendly type coal utilization system` to be planned in India. The items for survey are the present situation of economy and energy and the future trend, environmental problems on coal utilization, the present status of the coal distribution system and study subjects, the present status of coal utilization by field and study subjects, a possibility of briquette use, a possibility of coal fluidization, electric power development plans and coal combustion technology in each industry, etc. The subjects are the obligation of coal preparation to coal thermal power plants 1000 km away from coal mines starting 2001, measures taken for effective ash use, measures taken for superannuated gas furnaces, etc. Based on the results of these site surveys and reports of the investigation under consignment from CMPDI, the paper studied/analyzed possibilities of introducing the coal utilization system having actual introduction results in Japan to India, and made an investigational report. 39 refs., 12 figs., 56 tabs.

Fungal treatment: a prospective process for eco-friendly bioremediation of wastewater sludge

International Nuclear Information System (INIS)

Molla, A. H.; Fakhru'l-Razi, A.

2009-01-01

None of the conventional techniques is safe and environmental friendly for wastewaters/sludge disposal. A sustainable, safe and environmental friendly biological technique is a great apprehension to the relevant scientists. Since the fungal treatment was exercised to evaluate its potentially for sustainable bioseparation and bioremediation of wastewater. Bioseparation and bioremediation of wastewater sludge by fungal inoculation implied the decreasing of bio solids, total suspended solids (TSS), turbidity, chemical oxygen demand (COD) and specific resistance to filtration (SRF) of wastewater. (Author)

MOIRA Software Framework - Integrated User-friendly Shell for The Environmental Decision Support Systems

International Nuclear Information System (INIS)

Hofman, Dmitry; Nordlinder, Sture

2003-01-01

MOIRA DSS is a model-based computerised system for the identification of optimal remedial strategies to restore radionuclide contaminated fresh water environment The examples of the questions which decision-maker could address to the system are 'Is lake liming effective in reducing the radiocesium uptake by fish?', C an control of catchment run-off be an effective measure against further redistribution of radionuclides by river?', 'Is sediment removal worthwhile to reduce further contamination of the aquatic environment?'. The MOIRA system could help decision-maker to avoid implementation of inappropriate and expensive countermeasures. MOIRA gives the possibility to predict effeas of implementation of different types of the countermeasures and evaluate both 'ecological' and 'social' effect of the countermeasures. Decision support process using MOIRA DSS can be subdivided to the following steps: Definition of the site-specific environmental and socio-economic parameters using GIS-based data. Unknown site-specific data could be estimated using GIS-based models, default data for the socio-economic parameters, data directly provided by user. Providing data about fallout of the radionuclides. Definition of the time interval for which prognosis will be made. Definition of the alternative strategies of the countermeasures. Evaluation of the sequences of the implementation of the user-defined strategies and 'no actions' strategy using predictive models. Ranking strategies using Multi-Attribute Analysis Module (MAA) Preparation of the recommendations in the form of report. This process requires usage of several computerised tools such as predictive models, multi-attribute analysis software, geographical information system, data base. MOIRA software framework could be used as the basis for the creation of the wide range of the user-friendly and easy-to-learn decision support systems. It can also provide the advanced graphical user interface and data checking system for the

Application of environmental and economic metrics to guide the development of biocatalytic processes

DEFF Research Database (Denmark)

Lima Ramos, Joana; Tufvesson, Pär; Woodley, John

2014-01-01

the use of adequate tools to evaluate the performance of a process, in particular during process development. Nevertheless, at the early development stage, evaluation of biocatalytic processes is not a trivial task, not only due to the lack of data, but also because at this stage many of the biocatalytic......). Interestingly, it is often argued that the mild conditions frequently used in biocatalytic reactions (ambient temperature and pressure, neutral pH and aqueous-based media) automatically lead to environmentally-friendly and cost-effective production processes. However, such a conclusion is not justified without...

Technical, economic and environmental investigation of using district heating to prepare domestic hot water in Chinese multi-storey buildings

DEFF Research Database (Denmark)

Zhang, Lipeng; Xia, Jianjun; Thorsen, Jan Eric

2016-01-01

The development of DH (District Heating) is an environmentally friendly and energy-efficient strategy in China. Currently, the vast majority of DH systems are SH (Space Heating) only and do not provide DHW (Domestic Hot Water). DHW is mainly produced by individual water heaters due to the cost......-effective issues of the centralized DHW systems. From the perspective of long-term development, DHW produced via DH systems would be more sustainable because DH is an important precondition for an environmental safe use of domestic waste fuels. This paper presents an approach that uses flat stations meanwhile...

Using cost/risk uncertainty spheres to make better environmental restoration decisions

International Nuclear Information System (INIS)

Shangraw, R.F.; Cheney, C.S.; Shangraw, W.R.

1994-01-01

The process of balancing cost expenditures and risk reductions during environmental restoration (ER) activities (and as part of other environmental programs such as waste management and facility transition) is the critical policy decision facing DOE site decisionmakers and associated stakeholders (including regulators). The ground rules for this process are specified formally in the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended, the Resource Conservation and Recovery Act, as amended, the subsequent regulations (e.g., National Contingency Plan) and policies that EPA and State agencies have issued to implement these programs, and (increasingly) interagency agreements and orders. Clearly, as Federal resources to meet environmental commitments become more constrained, cost and risk management tradeoffs will become even more needed and their results pronounced

From Family to Friends: Does Witnessing Interparental Violence Affect Young Adults’ Relationships with Friends?

Science.gov (United States)

Mandal, Mahua; Hindin, Michelle J.

2013-01-01

Purpose Childhood exposure to violence in one’s family of origin has been closely linked to subsequent perpetration and victimization of intimate partner violence. There is, however, little research on the relationship between witnessing violence and subsequent peer violence. This study investigates the effects of witnessing interparental violence among Filipino young adults on their use and experience of psychological aggression with friends. Methods The data source for this study was the Cebu Longitudinal Health and Nutrition Survey. Recent perpetration and victimization of friend psychological aggression among young adults ages 21–22 years was assessed through self-reports from the 2005 survey, and witnessing interparental violence during childhood was assessed through self-reports from the 2002 survey. Multinomial logistic regression was used to examine the effects of witnessing interparental violence on subsequent use and experience of friend psychological aggression. Analyses were stratified by gender. Results About 13% of females and 4% of males perpetrated psychological aggression towards close friends, and about 4% of females and males were victims. Fourteen percent of females and 3% of males experienced bidirectional psychological aggression. About 44% of females and 47% of males had, during childhood, witnessed their parents physically hurt one another. Witnessing maternal and reciprocal interparental violence during childhood significantly predicted bidirectional friend psychological aggression among males. Among females, witnessing interparental violence did not significantly predict involvement with friend psychological aggression. Conclusions Violence prevention programs should consider using family-centered interventions, and apply a gendered lens to their application. Further research on gender differences in friend aggression is recommended. PMID:23697789

Cost decreases in environmental technology. Evidence from four case studies

Energy Technology Data Exchange (ETDEWEB)

Oosterhuis, F. [Instituut for Environmental Studies, Vrije Universiteit VU, Amsterdam (Netherlands)

2007-07-15

The cost of a new technology tends to decrease as its uptake grows, and environmental technology is no exception to this general rule. Factors that can bring about such cost reductions include economies of scale, 'learning-by-doing', incremental technological improvements, and growing competition. In preparing environmental policies, the potential for future cost reductions is often disregarded. The present study aims to provide some additional empirical evidence on the cost decreases in environmental technology and the factors that lie behind them. To this end, four exemplary case studies have been selected. The first case (NOx emission abatement by Selective Catalytic Reduction (SCR)), shows a wide variety in cost estimates, without a clear trend. This is even true for the costs of a fairly homogeneous type of investment (SCR in coal fired power plants). Nevertheless, it is clear that an important cost decrease has been achieved by prolonging the lifetime of the catalyst, which is one of the main cost components in SCR. In the second case (NH3 emission abatement by chemical air scrubbers in pig farming) there is not yet sufficient experience with the technology to draw conclusions on the development of costs. However, it is already clear that economizing on the capacity of the system can contribute to important cost savings. Three-way catalytic converters in cars have shown significant price decreases following their large scale introduction on the European market in the early 1990s. Probably economies of scale have played an important role in this case, as the size of the market made mass production possible. To some extent, cost reductions may also be attributed to improvements such as the need for less materials (e.g. platinum). Furthermore, the performance of catalytic converters has improved, implying that the cost per unit of emission reduction has decreased even more than the cost of the device itself. Market prices of Compact Fluorescent Lamps

The great environmental restoration cost estimating shootout: A blind test of three DOE cost estimating groups

International Nuclear Information System (INIS)

Klemen, Paul

1992-01-01

The cost of the Department of Energy's (DOE) Environmental Restoration (ER) Program has increased steadily over the last three years and, in the process, has drawn increasing scrutiny from Congress, the public, and government agencies such as the Office of Management and Budget and the General Accounting Office. Programmatic costs have been reviewed by many groups from within the DOE as well as from outside agencies. While cost may appear to be a universally applicable barometer of project conditions, it is actually a single dimensional manifestation of a complex set of conditions. As such, variations in cost estimates can be caused by a variety of underlying factors such as changes in scope, schedule, performing organization, economic conditions, or regulatory environment. This paper will examine the subject of cost estimates by evaluating three different cost estimates prepared for a single project including two estimates prepared by project proponents and another estimate prepared by a review team. The paper identifies the reasons for cost growth as measured by the different estimates and evaluates the ability of review estimates to measure the validity of costs. The comparative technique used to test the three cost estimates will identify the reasons for changes in the estimated cost, over time, and evaluate the ability of an independent review to correctly identify the reasons for cost growth and evaluate the reasonableness of the cost proposed by the project proponents. Recommendations are made for improved cost estimates and improved cost estimate reviews. Conclusions are reached regarding the differences in estimate results that can be attributed to differences in estimating techniques, the implications of these differences for decision makers, and circumstances that are unique to environmental cost estimating. (author)

Socialising adolescent volunteering: how important are parents and friends? Age dependent effects of parents and friends on adolescents' volunteering behaviours

NARCIS (Netherlands)

van Goethem, A.A.J.; van Hoof, A.; van Aken, M.A.G.; Orobio de Castro, B.; Raaijmakers, Q.A.W.

2014-01-01

This study examined the relative importance of best friend's and parents' volunteering and civic family orientation (combined with open family communication) in adolescent volunteering, and the moderating effect of age. Results, involving 698 adolescents (M age = 15.19; SD = 1.43), revealed that

Socialising adolescent volunteering : How important are parents and friends? Age dependent effects of parents and friends on adolescents' volunteering behaviours

NARCIS (Netherlands)

Van Goethem, Anne A J; van Hoof, Anne; van Aken, Marcel A G; Orobio de Castro, Bram; Raaijmakers, Quinten A W

2014-01-01

This study examined the relative importance of best friend's and parents' volunteering and civic family orientation (combined with open family communication) in adolescent volunteering, and the moderating effect of age. Results, involving 698 adolescents (M age. = 15.19; SD= 1.43), revealed that

Effects of baby-friendly hospital initiative on breast-feeding practices in Sindh

International Nuclear Information System (INIS)

Khan, M.; Akram, D.S.

2013-01-01

To determine changes in the breastfeeding practices of mothers after receiving counseling on Ten Steps to Successful Breastfeeding as defined by the Baby Friendly Hospital Initiative comparing baby friendly hospitals (BFHs) and non-baby-friendly hospitals in Sindh, Pakistan. Methods: The observational study was conducted from June 2007 to June 2009 in randomly selected baby-friendly and non-baby-friendly hospitals of Sindh, Pakistan. Non-probability purposive sampling was employed. The maternity staff was trained on Ten Steps to Successful Breastfeeding. The changes in breastfeeding practices were analysed by SPSS version 15. Results: A total of 236 women were included in the study. Of them, 196 (83.05%) were from baby-friendly hospitals and 40 (16.94%) from non-baby-friendly hospitals. Besides, 174 (88.7%) mothers in baby-friendly hospitals and 5 (12.5%) in non-baby-friendly hospitals during antenatal care received counseling by healthcare providers. There was an increase in breastfeeding practice up to 194 (98.97%) in the first category compared to 12 (30%) in the other category. Conclusion: Counseling under the Baby Friendly Hospital Initiative improved breastfeeding practices up to 98.97% in baby-friendly compared to non-baby-friendly hospitals. (author)

A review on the geoenvironmental and geoecological integrated technology for environmental remediation in Vietnam: approaches, contributions, challenges and perspectives

Science.gov (United States)

Trong Nhuan, Mai; Hoang Ha, Nguyen Thi; Hoai, Ta Thi; Dang Quy, Tran

2017-06-01

Geoenvironmental and geoecological integrated technology (GGIT) is a cost-effective and environment-friendly technology that encompasses the applications of earth science principles and functions of geological environment and ecosystems to assimilate and minimize the spread of pollutants, to enhance the sorption capacity and environmental remediation. On the basis of the integrated approaches such as system, anthropogenic activities - ecosystem - environment interaction, effectiveness and feasibility, GGIT has provided significant applications in Vietnam such as waste containment and remediation and environmental protection. The results of a pilot scale using iron mine drainage sludge and common reed (Phragmites australis) for wastewater treatment in a Pb-Zn mine in northern Vietnam indicated the effective and potential application of GGIT. However, GGIT has many challenges in limited funding conditions, constraints in the initial development of GGIT, incomplete transfer to users, and quantitative assessment of pollutant cleanup by natural environments and ecosystems. Environmental pollution quote, impacts to exposed organisms, increasing demands for application of low-cost technologies, the availability of potential sorbents, indigenous plants, and ecosystems for environmental remediation, and collaboration will promote development, contribution, and implementation of GGIT applications in Vietnam.

Environmental costs of sugarcane agroecosystems; Custos ambientais de agroecossistemas da cana-de-acucar

Energy Technology Data Exchange (ETDEWEB)

Mello, Renato de

1997-07-01

This thesis analyzes and evaluates sugarcane agroecosystems, taking into account the environmental implications and the use of natural resources as production factors. The costs are estimated in financial and energetic measures, from the implantation of the culture to the delivery of the cane to the mill. In order to perform the basic model, a business group, that presently represents the paradigm in Brazil, was selected and from those data on, scenarios of financial and energetic costs of alternative production systems were structured. The environmental aspects were evaluated as production factors and also include in the tables. Using the costs and the energetic tables, combined with the environmental implication data of the agroecosystems, three scenarios were established. The basic scenario takes into account the commercial energy used and the environment was not considered as a part of the production. In the second scenario the environmental impacts and the use of natural resources are estimated as production factors and involve costs. The third scenario simulates a situation where the agroecosystem is planned to be sustained and the environmental damages are minimized. The results indicated higher costs for the scenarios of inserting environmental costs than for the others scenarios. They also indicated that it is possible to achieve a profitable production in a sustainable ecosystem and that the differences of the energy amount between the systems remain still small, and that the sustainable perspective will only be attractive if it were based on the social definition of higher values to the natural environment. (author)

Friendly fire: Longitudinal effects of exposure to violent video games on aggressive behavior in adolescent friendship dyads

Science.gov (United States)

Burk, William J.; Stoltz, Sabine E. M. J.; van den Berg, Yvonne H. M.; Cillessen, Antonius H. N.

2018-01-01

Research on gaming effects has focused on adolescence, a developmental period in which peer relationships become increasingly salient. However, the impact of peers on the effects of violent gaming on adolescents has been understudied. This study examined whether adolescents’ exposure to violent video games predicted their own and their friend's aggression one year later. Among 705 gaming adolescents, 141 dyads were identified based on reciprocated best friend nominations (73.8% male, Mage = 13.98). Actor‐Partner Interdependence Models indicated that adolescent males’ (but not females’) exposure to violent games positively predicted the aggression of their best friend 1 year later. This effect appeared regardless of whether the friends played video games together or not. The study illustrates the importance of peers in the association between violent gaming and aggression. PMID:29363767

Sericins of mulberry and non-mulberry silkworms for eco-friendly synthesis of silver nanoparticles.

Science.gov (United States)

Chaisabai, Wanna; Khamhaengpol, Arunrat; Siri, Sineenat

2018-05-01

Green synthesis of silver nanoparticles (AgNPs) has received many interests as a simple, cost-effective, and environmentally friendly method. This study reported the use of sericins extracted from non-mulberry (Samia cynthia ricini) and mulberry (Bombyx mori) silkworms for green syntheses of AgNPs. Both sericins possessed the reducing activity, which the reducing activity of S. c. ricini sericin was significantly higher than that of B. mori sericin. The formation of AgNPs facilitated by S. c. ricini sericin was greater than B. mori sericin as determined by the intensity of the surfacing plasmon resonance peak of silver at 412 nm. The synthesized AgNPs using both sericins were spherical and uniform in size with the average diameter of ∼13 nm. The silver component and the crystalline structure was determined by energy-dispersive X-ray and X-ray diffraction analyses. The synthesized AgNPs exhibited the antibacterial activity against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, suggesting their potential application as an effective antibacterial agent.

Comparing the happiness effects of real and on-line friends.

Directory of Open Access Journals (Sweden)

John F Helliwell

Full Text Available A recent large Canadian survey permits us to compare face-to-face ('real-life' and on-line social networks as sources of subjective well-being. The sample of 5,000 is drawn randomly from an on-line pool of respondents, a group well placed to have and value on-line friendships. We find three key results. First, the number of real-life friends is positively correlated with subjective well-being (SWB even after controlling for income, demographic variables and personality differences. Doubling the number of friends in real life has an equivalent effect on well-being as a 50% increase in income. Second, the size of online networks is largely uncorrelated with subjective well-being. Third, we find that real-life friends are much more important for people who are single, divorced, separated or widowed than they are for people who are married or living with a partner. Findings from large international surveys (the European Social Surveys 2002-2008 are used to confirm the importance of real-life social networks to SWB; they also indicate a significantly smaller value of social networks to married or partnered couples.

Cost-time management for environmental restoration activities at the Department of Energy`s Idaho National Engineering Laboratory, Idaho Chemical Processing Plant

Energy Technology Data Exchange (ETDEWEB)

Fourr, B.R.; Owen, A.H.; Williamson, D.J. [Westinghouse Idaho Nuclear Co., Inc., Idaho Falls, ID (United States); Nash, C.L. [USDOE Idaho Field Office, Idaho Falls, ID (United States)

1992-05-22

Cost-time management methods have been developed by Westinghouse to examine business applications from a cost-time perspective. The initial application of cost-time management within Westinghouse was targeted at reducing cycle time in the manufacturing sector. As a result of the tremendous success of reduced cycle time in manufacturing, Westinghouse initiated application of the management technique to Environmental Restoration activities at its Government Owned Contractor Operated facilities. The Westinghouse initiative was proposed in support of the Department of Energy`s goals for cost effective Environmental Restoration activities. This paper describes the application of the cost-time method to Environmental Restoration work currently being performed at the Idaho National Engineering Laboratory (INEL) for the Department of Energy (DOE) by Westinghouse Idaho Nuclear Company (WINCO).

Cost analysis and ecological benefits of environmental recovery methodologies in bauxite mining

OpenAIRE

Guimarães,João Carlos Costa; Barros,Dalmo Arantes de; Pereira,José Aldo Alves; Silva,Rossi Allan; Oliveira,Antonio Donizette de; Borges,Luís Antônio Coimbra

2013-01-01

This work analyzed and compared three methods of environmental recovery in bauxite mining commonly used in Poços de Caldas Plateau, MG, by means of recovery costs and ecological benefits. Earnings and costs data of environmental recovery activities were obtained for the areas that belonged to the Companhia Geral de Minas – CGM, on properties sited in the city of Poços de Caldas, MG. The amount of costs of these activities was used to compare the recovery methods by updating them monetarily to...

Controlling Healthcare Costs: Just Cost Effectiveness or "Just" Cost Effectiveness?

Science.gov (United States)

Fleck, Leonard M

2018-04-01

Meeting healthcare needs is a matter of social justice. Healthcare needs are virtually limitless; however, resources, such as money, for meeting those needs, are limited. How then should we (just and caring citizens and policymakers in such a society) decide which needs must be met as a matter of justice with those limited resources? One reasonable response would be that we should use cost effectiveness as our primary criterion for making those choices. This article argues instead that cost-effectiveness considerations must be constrained by considerations of healthcare justice. The goal of this article will be to provide a preliminary account of how we might distinguish just from unjust or insufficiently just applications of cost-effectiveness analysis to some healthcare rationing problems; specifically, problems related to extraordinarily expensive targeted cancer therapies. Unconstrained compassionate appeals for resources for the medically least well-off cancer patients will be neither just nor cost effective.

Research report. Environmentally friendly energy community research business for Fujieda district (Refuse energy utilization); Fujieda chiku kankyo chowagata energy community chosa jigyo (haikibutsu energy riyo shisetsu) chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

An environmentally friendly refuse energy utilizing business, for which RDF (refuse derived fuel) produced out of wastes discharged by industries belonging to a Fujieda city environmental protection council will provide the heat source, is proposed by the said council. The proposal is subjected to a study, a basic plan is drafted, and a decision is made on its profitability. In the study, surveys are conducted on the actualities of wastes and of demand for heat, and specifications are worked out relating to transportation and storage of RDF, production of steam by an RDF-fired boiler, routing of pipes for transmitting the steam to the industries in the district, facility costs, operating costs, etc. It is found that the amount of RDF produced out of the wastes discharged by the council member industries is so small that it can meet the demand of only one industry and that, even if more wastes are collected from a wider area, the increased amount will but meet the demand of two industries and a hot water pool. It is found that the system will be economically feasible, however, if the shortage of RDF-generated energy is covered by an oil-fired boiler and thereby impartiality is established in steam distribution and steam production unit price is reduced. In view of the intensification of control over dioxin, etc., the business will be gaining profit in 2002 and after. (NEDO)

Impact of environmental cost on economics of thermal power plant. Paper no. IGEC-1-007

International Nuclear Information System (INIS)

Chandra, H.; Kaushik, S.C.; Chandra, A.

2005-01-01

Cost analysis per unit of power generation have been performed for coal based thermal power plant situated in Dadri (UP) for Indian and imported coal from Australia and America. In our study it has been found that it is better to use imported coal in Indian thermal power plants with advantages like low environmental, investment and total cost per unit of power generation. The effect of percent excess air and plant load factor on total cost per unit of power generation is also analyzed. (author)

Costs and cost-effectiveness of periviable care.

Science.gov (United States)

Caughey, Aaron B; Burchfield, David J

2014-02-01

With increasing concerns regarding rapidly expanding healthcare costs, cost-effectiveness analysis allows assessment of whether marginal gains from new technology are worth the increased costs. Particular methodologic issues related to cost and cost-effectiveness analysis in the area of neonatal and periviable care include how costs are estimated, such as the use of charges and whether long-term costs are included; the challenges of measuring utilities; and whether to use a maternal, neonatal, or dual perspective in such analyses. A number of studies over the past three decades have examined the costs and the cost-effectiveness of neonatal and periviable care. Broadly, while neonatal care is costly, it is also cost effective as it produces both life-years and quality-adjusted life-years (QALYs). However, as the gestational age of the neonate decreases, the costs increase and the cost-effectiveness threshold is harder to achieve. In the periviable range of gestational age (22-24 weeks of gestation), whether the care is cost effective is questionable and is dependent on the perspective. Understanding the methodology and salient issues of cost-effectiveness analysis is critical for researchers, editors, and clinicians to accurately interpret results of the growing body of cost-effectiveness studies related to the care of periviable pregnancies and neonates. Copyright © 2014 Elsevier Inc. All rights reserved.

Evaluation of environmental management cost estimating capabilities for the subject area ''Life-cycle economics for radioactive waste management and environmental remediation''

International Nuclear Information System (INIS)

Hombach, W.G.

1995-01-01

This paper provides a comprehensive perspective on the scope of Environmental Management (EM) activities and on the existing capability to estimate their costs. The scope is defined in terms of both activities and associated cost driving factors. The capability to estimate this scope was determined by evaluating existing cost estimating tools identified through a survey of the US Department of Energy (DOE), the US Department of Defense (DoD), the US Environmental Protection Agency, and private industry. This paper is largely based on the results of a report produced for the Office of the Secretary of Defense, US Department of Defense, entitled, Evaluation of Environmental Management Cost-Estimating Capabilities of Major Defense Acquisition Programs, March 22, 1995. The DoD sponsored report was designed to have a broad application relevant not only to DoD, but to other government agencies, and industry. In addition to DoD, it has particular application to DOE because significant portions of the analyses and data were derived from DOE environmental management databases, cost models, reports, and work breakdown structures. This paper provides the basis used and methodology employed to conduct an evaluations of selected EM cost estimating tools. The following topics are discussed: Life Cycle of EM Activities; Major Elements of EM Activities; Cost Tool Evaluation Matrix; Results of Cost Tool Evaluations; Cost Tool Development Plan

Genetic and environmental sources of individual religiousness: the roles of individual personality traits and perceived environmental religiousness.

Science.gov (United States)

Kandler, Christian; Riemann, Rainer

2013-07-01

In the current study, we examined the genetic and environmental sources of the links between individual religiousness and individual personality traits, perceived parental religiousness, and perceived peer religiousness. Data from 870 individuals (incl. 394 twin pairs) were analyzed. Variance in individual religiousness was significantly influenced by genetic effects, environmental influences shared by twins reared together, and individual-specific environmental influences. Individual religiousness showed significant associations with age, sex, specific personality traits (e.g., agreeableness, openness to values), and perceived religiousness of important social interaction partners, such as parents, best friends, and spouses. The links to personality traits were relatively small and primarily genetically mediated. The associations between individual religiousness and parental religiousness were substantial and mediated by shared environmental effects. These links significantly decreased across age accompanying a significant decrease of shared environmental influences on individual religiousness. The correlations between individual religiousness and perceived religiousness of spouses and best friends were relatively moderate but increased with age. These associations were mediated by genetic as well as nonshared environmental sources accompanying an increase of nonshared environmental influences on individual religiousness with age. The results suggest that inter-individual differences in religiousness are due to multiple sources.

Environmental effect of water absorption and flexural strength of red ...

African Journals Online (AJOL)

user

International Journal of Engineering, Science and Technology ... advantages over glass fiber or carbon fiber like renewable, environmental friendly, low ... in fiber reinforced plastics, a judicious selection of matrix and the reinforcing phase can ...

A simple, rapid, cost-effective and sensitive method for detection of Salmonella in environmental and pecan samples.

Science.gov (United States)

Dobhal, S; Zhang, G; Rohla, C; Smith, M W; Ma, L M

2014-10-01

PCR is widely used in the routine detection of foodborne human pathogens; however, challenges remain in overcoming PCR inhibitors present in some sample matrices. The objective of this study was to develop a simple, sensitive, cost-effective and rapid method for processing large numbers of environmental and pecan samples for Salmonella detection. This study was also aimed at validation of a new protocol for the detection of Salmonella from in-shell pecans. Different DNA template preparation methods, including direct boiling, prespin, multiple washing and commercial DNA extraction kits, were evaluated with pure cultures of Salmonella Typhimurium and with enriched soil, cattle feces and in-shell pecan each spiked individually with Salmonella Typhimurium. PCR detection of Salmonella was conducted using invA and 16S rRNA gene (internal amplification control) specific primers. The effect of amplification facilitators, including bovine serum albumin (BSA), polyvinylpyrrolidone (PVP), polyethylene glycol (PEG) and gelatin on PCR sensitivity, was also evaluated. Conducting a prespin of sample matrices in combination with the addition of 0·4% (w/v) BSA and 1% (w/v) PVP in PCR mix was the simplest, most rapid, cost-effective and sensitive method for PCR detection of Salmonella, with up to 40 CFU Salmonella per reaction detectable in the presence of over 10(9 ) CFU ml(-1) of background micro-organisms from enriched feces soil or pecan samples. The developed method is rapid, cost-effective and sensitive for detection of Salmonella from different matrices. This study provides a method with broad applicability for PCR detection of Salmonella in complex sample matrices. This method has a potential for its application in different research arenas and diagnostic laboratories. © 2014 The Society for Applied Microbiology.

The cost risk implementation on design-build project of integrated public spaces child friendly in capital of Jakarta

Science.gov (United States)

Mardiaman, Mubarok, Abdul

2017-11-01

Jakarta area of 662.33 km2 with a population of 10,075,030 inhabitants and green open spaces 9.98%. The Jakarta government built a child-friendly integrated open space as facilities for playing. Providing of facilities was hoped suitable with time, cost, quality, accountability and proper financial governance. Based on the PU ministerial regulation number 19/PRT/M/2015 on the standards and guidelines for procurement the design and construction work on the integrated build and the PU ministerial regulation No. 07/PRT/M/2011 on standards and guidelines for procurement of construction works and consulting services of public works and the ministry of housing. RPTRA development at 123 locations in Jakarta was implemented base on the contract of design and build. The design study was influenced by the cost elements; the main strength (expert), skilled personnel, support personnel, major equipment and support. The construction fee relies on; expert implementation, hardware implementation, preparation work, land, buildings, courtyards, fences, complementary and governance capabilities for human resources in completing the construction activities to minimize the cost risk. Montecarlo simulations was conducted to determine the average unit price, model and analyze systems. In the cost contract, the percentage of design work stipulated 2.5%, build 97.5%. Base on regulation the minister of public work for design work cost 2.72%, build 97.28%. Then, actual cost for design 2.67% and build 97.33%. From the three reference was shown that there are differentiation one another. The acceleration of planning able to make the cost and time more efficient that impact on the implementation margin.

Choice of organic foods is related to perceived consequences for human health and to environmentally friendly behaviour.

Science.gov (United States)

Magnusson, Maria K; Arvola, Anne; Hursti, Ulla Kaisa Koivisto; Aberg, Lars; Sjödén, Per-Olow

2003-04-01

We designed a questionnaire concerned with attitudes and behaviour towards organic foods, environmentally friendly behaviour (EFB), and perceived consequences of organic food choice in terms of human health, the environment and animal welfare. It was mailed in 1998 to a random nation-wide sample of 2000 Swedish citizens, ages 18-65 years, and 1154 (58%) responded. Self-reported purchase of organic foods was most strongly related to perceived benefit for human health. Performance of EFBs such as refraining from car driving was also a good predictor of purchase frequency. The results indicate that egoistic motives are better predictors of the purchase of organic foods than are altruistic motives.

Environmentally friendly ionic liquid-in-water microemulsions for extraction of hydrophilic and lipophilic components from Flos Chrysanthemi.

Science.gov (United States)

Chen, Jue; Cao, Jun; Gao, Wen; Qi, Lian-Wen; Li, Ping

2013-10-21

Ionic liquids (ILs) have numerous chemical applications as environmentally green solvents that are extending into microemulsion applications. In this work, a novel benign IL-in-water microemulsion system modified by an IL surfactant has been proposed for simultaneous extraction of hydrophilic and lipophilic constituents from Flos Chrysanthemi (Chrysanthemum morifolium). Constituents were analyzed by rapid-resolution liquid chromatography coupled with quadrupole time-of-flight mass spectrometry. A mixture-design approach was used to optimize the IL surfactant and the IL oil phase in the microemulsion system. Microemulsions consisting of 6.0% 1-dodecyl-3-methylimidazolium hydrogen sulfate, 0.1% 1-vinyl-3-methylimidazolium hexafluorophosphate and 93.9% water offered the acceptable extract efficiency that are comparable to or even better than conventional volatile organic solvents. This assay was fully validated with respect to the linearity of response (r(2) > 0.999 over two orders of magnitude), precision (intra-RSD < 0.49 and inter-day RSD < 2.21), and accuracy (recoveries ranging from 93.73% to 101.84%). The proposed IL-in-water microemulsion method provided an environmentally friendly alternative for efficient extraction of compounds from Flos Chrysanthemi and could be extended to complex environmental and pharmaceutical samples.

Comparative environmental effects and cost analysis between conventional and non-conventional energy sources - A case for objective analysis and decision making in Nigeria's Energy Policy

International Nuclear Information System (INIS)

Akinbami, J. F. K.

1997-01-01

Energy, which is simply 'ability to do work' is the central cross-sectoral issue which affects all human activities either directly or indirectly. It is a vital input to economic growth and development of any economy, developing or developed. However, as there are two sides to a coin, so is the issue of energy use. While it contributes to the economic growth and development of a nation, its usage has with it attendant environmental consequences. At every stage along the chain, from resource delineation and extraction, through conversion, transportation, and end-use, the energy industry faces environmental challenges. Each of these stages and even the associated environmental burdens is not without a cost. This paper therefore sets out to review and compare the environmental effects as well as the cost analysis of both the conventional and non-conventional energy resources generally and with particular emphasis on Nigeria. This hopefully should then inform the citizenry in their drive for energy consumption as well as the nation's planners and decision makers in their efforts at adequate energy planning and management for both economic and environmental sustainability in the country

Friendly fire: Longitudinal effects of exposure to violent video games on aggressive behavior in adolescent friendship dyads.

Science.gov (United States)

Verheijen, Geert P; Burk, William J; Stoltz, Sabine E M J; van den Berg, Yvonne H M; Cillessen, Antonius H N

2018-05-01

Research on gaming effects has focused on adolescence, a developmental period in which peer relationships become increasingly salient. However, the impact of peers on the effects of violent gaming on adolescents has been understudied. This study examined whether adolescents' exposure to violent video games predicted their own and their friend's aggression one year later. Among 705 gaming adolescents, 141 dyads were identified based on reciprocated best friend nominations (73.8% male, M age  = 13.98). Actor-Partner Interdependence Models indicated that adolescent males' (but not females') exposure to violent games positively predicted the aggression of their best friend 1 year later. This effect appeared regardless of whether the friends played video games together or not. The study illustrates the importance of peers in the association between violent gaming and aggression. © 2018 The Authors. Aggressive Behavior Published by Wiley Periodicals, Inc.

Can Environmental Regulations Promote Corporate Environmental Responsibility? Evidence from the Moderated Mediating Effect Model and an Empirical Study in China

Directory of Open Access Journals (Sweden)

Benhong Peng

2018-02-01

Full Text Available Based on the Stakeholder theory, a moderated mediating effect model is developed to reach the study objective, revealing an important connection that suggests environmental regulations (ERs influence corporate environmental responsibility (CER (Porter Hypothesis. In building the model, the validity of the questionnaire data was analyzed with factor analysis. By employing a two-step approach, a regression analysis is utilized to discuss the mediating effect of altruistic motivation and moderating effect of green innovation, and a structural equation model is used to explore the interactive mechanism of different variables. It is found that altruistic motivation plays a medium role in the relationship between ERs and CER, and green innovation engages a positive coordination in the relationship. The empirical study identifies factors affecting enterprises’ willingness to undertake environmental responsibility, including environment policies, corporate culture, and personal characters among others. It is also revealed that altruistic motivation is conducive to forming a community interests among enterprises and enhancing their resistance to market risks, which explains and corroborates the Stakeholder theory; and the higher the level of green innovation, the more willing enterprises are to implement environmentally friendly operations.

Mosquito Traps: An Innovative, Environmentally Friendly Technique to Control Mosquitoes

Directory of Open Access Journals (Sweden)

Brigitte Poulin

2017-03-01

Full Text Available We tested the use of mosquito traps as an alternative to spraying insecticide in Camargue (France following the significant impacts observed on the non-target fauna through Bti persistence and trophic perturbations. In a village of 600 inhabitants, 16 Techno Bam traps emitting CO2 and using octenol lures were set from April to November 2016. Trap performance was estimated at 70% overall based on mosquitoes landing on human bait in areas with and without traps. The reduction of Ochlerotatus caspius and Oc. detritus, the two species targeted by Bti spraying, was, respectively, 74% and 98%. Traps were less efficient against Anopheles hyrcanus (46%, which was more attracted by lactic acid than octenol lures based on previous tests. Nearly 300,000 mosquitoes from nine species were captured, with large variations among traps, emphasizing that trap performance is also influenced by surrounding factors. Environmental impact, based on the proportion of non-target insects captured, was mostly limited to small chironomids attracted by street lights. The breeding success of a house martin colony was not significantly affected by trap use, in contrast to Bti spraying. Our experiment confirms that the deployment of mosquito traps can offer a cost-effective alternative to Bti spraying for protecting local populations from mosquito nuisance in sensitive natural areas.

Individual quality and age but not environmental or social conditions modulate costs of reproduction in a capital breeder.

Science.gov (United States)

Debeffe, Lucie; Poissant, Jocelyn; McLoughlin, Philip D

2017-08-01

Costs associated with reproduction are widely known to play a role in the evolution of reproductive tactics with consequences to population and eco-evolutionary dynamics. Evaluating these costs as they pertain to species in the wild remains an important goal of evolutionary ecology. Individual heterogeneity, including differences in individual quality (i.e., among-individual differences in traits associated with survival and reproduction) or state, and variation in environmental and social conditions can modulate the costs of reproduction; however, few studies have considered effects of these factors simultaneously. Taking advantage of a detailed, long-term dataset for a population of feral horses (Sable Island, Nova Scotia, Canada), we address the question of how intrinsic (quality, age), environmental (winter severity, location), and social conditions (group size, composition, sex ratio, density) influence the costs of reproduction on subsequent reproduction. Individual quality was measured using a multivariate analysis on a combination of four static and dynamic traits expected to depict heterogeneity in individual performance. Female quality and age interacted with reproductive status of the previous year to determine current reproductive effort, while no effect of social or environmental covariates was found. High-quality females showed higher probabilities of giving birth and weaning their foal regardless of their reproductive status the previous year, while those of lower quality showed lower probabilities of producing foals in successive years. Middle-aged (prime) females had the highest probability of giving birth when they had not reproduced the year before, but no such relationship with age was found among females that had reproduced the previous year, indicating that prime-aged females bear higher costs of reproduction. We show that individual quality and age were key factors modulating the costs of reproduction in a capital breeder but that

Carbon footprint and cost-effectiveness of cataract surgery.

Science.gov (United States)

Venkatesh, Rengaraj; van Landingham, Suzanne W; Khodifad, Ashish M; Haripriya, Aravind; Thiel, Cassandra L; Ramulu, Pradeep; Robin, Alan L

2016-01-01

This article raises awareness about the cost-effectiveness and carbon footprint of various cataract surgery techniques, comparing their relative carbon emissions and expenses: manual small-incision cataract surgery (MSICS), phacoemulsification, and femtosecond laser-assisted cataract surgery. As the most commonly performed surgical procedure worldwide, cataract surgery contributes significantly to global climate change. The carbon footprint of a single phacoemulsification cataract surgery is estimated to be comparable to that of a typical person's life for 1 week. Phacoemulsification has been estimated to be between 1.4 and 4.7 times more expensive than MSICS; however, given the lower degree of postoperative astigmatism and other potential complications, phacoemulsification may still be preferable to MSICS in relatively resource-rich settings requiring high levels of visual function. Limited data are currently available regarding the environmental and financial impact of femtosecond laser-assisted cataract surgery; however, in its current form, it appears to be the least cost-effective option. Cataract surgery has a high value to patients. The relative environmental impact and cost of different types of cataract surgery should be considered as this treatment becomes even more broadly available globally and as new technologies are developed and implemented.

Multiple-pollutant cost-effectiveness of greenhouse gas mitigation measures in the UK agriculture

International Nuclear Information System (INIS)

Eory, Vera; Topp, Cairistiona F.E.; Moran, Dominic

2013-01-01

Highlights: ► Multiple-pollutant marginal abatement cost curves can inform integrated environmental policy. ► We incorporated the co-effects on NH 3 , NO 3 − , P and sediment, as monetary values, into the UK GHG MACC. ► Adding co-effects modifies the GHG MACC, though with little impact unless using high damage values. ► Further research is needed on the co-effects of GHG mitigation measures and on damage values. ► Analysis should focus on the co-effects of measures that are slightly above or below the threshold. -- Abstract: This paper develops multiple-pollutant marginal abatement cost curve analysis to identify an optimal set of greenhouse gas (GHG) mitigation measures considering the trade-offs and synergies with other environmental pollutants. The analysis is applied to UK agriculture, a sector expected to make a contribution to the national GHG mitigation effort. Previous analyses using marginal abatement cost curves (MACCs) have determined the sector's GHG abatement potential based on the cost-effectiveness of a variety of technically feasible mitigation measures. Most of these measures have external effects on other pollution loads arising from agricultural activities. Here the monetary values of four of the most important impacts to water and air (specifically ammonia, nitrate, phosphorous and sediment) are included in the cost-effectiveness analysis. The resulting multiple-pollutant marginal abatement cost curve (MP MACC) informs the design of sustainable climate change policies by showing how the MP MACC for the UK agriculture can differ from the GHG MACC. The analysis also highlights research gaps, and suggests a need to understand the wider environmental effects of GHG mitigation options and to reduce the uncertainty in pollutant damage cost estimates

) The Application of Remote Sensing to Exploration and Production Projects in Shell Petroleum Development Company for Effective Environmental Management

International Nuclear Information System (INIS)

Mpaka, O.E.

2003-01-01

Over the years (especially within the last decade) environmental issues have assumed a proportion that the oil industry appeared unprepared for. The oil industry has not been immune from the consequences of the awareness generated by various interest groups world-wide. Environmental Assessment has become an integral part of all projects in Shell Development Company [SPDC] and the remote sensing tool has shown to be vital for effective management of the environment. The Niger Delta operations area covers approximately 70.0002km, an area including mangrove swamps, extensive forest and agricultural development, and most SPDC onshore operations are carried out in this fragile environment. Project citing in this environment requires careful planning and articulation of environmentally friendly and cost effective routes and sites. The implementation of satellite image processing and analysis, using georeferenced multispectral imagery have provided information on vegetation and other land cover types, topography including drainage, and infrastructure. The derived information is used for planning new well locations; flowlines and location access routes; impact assessment and monitoring of the environment. This article discusses how the environment is better managed by applying the remote sensing technology in each project embarked upon in SPDC. Some of he projects discussed include: Forcados CCP, Oluwa-Ore and Awoba-Soku-Bonny gasline routes/site investigation and selection projects Oben, Uzere/Oroni Field Development Planning ;3D Ovio Seismic prospect planning ;Obigbo Pipeline squatter mapping

Industry-Cost-Curve Approach for Modeling the Environmental Impact of Introducing New Technologies in Life Cycle Assessment.

Science.gov (United States)

Kätelhön, Arne; von der Assen, Niklas; Suh, Sangwon; Jung, Johannes; Bardow, André

2015-07-07

The environmental costs and benefits of introducing a new technology depend not only on the technology itself, but also on the responses of the market where substitution or displacement of competing technologies may occur. An internationally accepted method taking both technological and market-mediated effects into account, however, is still lacking in life cycle assessment (LCA). For the introduction of a new technology, we here present a new approach for modeling the environmental impacts within the framework of LCA. Our approach is motivated by consequential life cycle assessment (CLCA) and aims to contribute to the discussion on how to operationalize consequential thinking in LCA practice. In our approach, we focus on new technologies producing homogeneous products such as chemicals or raw materials. We employ the industry cost-curve (ICC) for modeling market-mediated effects. Thereby, we can determine substitution effects at a level of granularity sufficient to distinguish between competing technologies. In our approach, a new technology alters the ICC potentially replacing the highest-cost producer(s). The technologies that remain competitive after the new technology's introduction determine the new environmental impact profile of the product. We apply our approach in a case study on a new technology for chlor-alkali electrolysis to be introduced in Germany.

Marketing Animal-Friendly Products: Addressing the Consumer Social Dilemma with Reinforcement Positioning Strategies