WorldWideScience

Sample records for cosmogenic nuclide production

  1. Cosmogenic nuclide production within the atmosphere and long period comets

    Science.gov (United States)

    Overholt, Andrew C.

    The Earth is constantly bombarded by cosmic rays. These high energy particles collide with target nuclei, producing a shower of secondary particles. These secondaries contribute significantly to the radiation background at sea level and in the atmosphere, as well as producing rare cosmogenic nuclides. This contribution is variable over long time scales as astrophysical events change the cosmic ray flux incident on the Earth. Our work re-examines a previously proposed climate effect of increased cosmic ray flux due to galactic location. Although our work does not support this effect, cosmic ray secondaries remain a threat to terrestrial biota. We calculate the cosmogenic neutron flux within the atmosphere as a function of primary spectrum. This work is pivotal in determining the radiation dose due to any arbitrary astrophysical event where the primary spectrum is known. Additionally, this work can be used to determine the cosmogenic nuclide production from such an event. These neutrons are the fundamental source of cosmogenic nuclides within our atmosphere and extraterrestrial matter. We explore the idea that excursions in 14C and 10Be abundances in the atmosphere may arise from direct deposition by long-period comet impacts, and those in 26Al from any bolide. We find that the amount of nuclide mass on large long-period comets entering the Earth's atmosphere may be sufficient for creating anomalies in the records of 14C and 10Be from past impacts. In particular, the estimated mass of the proposed Younger Dryas comet is consistent with its having deposited sufficient isotopes to account for recorded nuclide increases at that time. The 26Al/10Be ratio is much larger in extraterrestrial objects than in the atmosphere, and so, we note that measuring this ratio in ice cores is a suitable further test for the Younger Dryas impact hypothesis. This portion of our work may be used to find possible impact events in the geologic record as well as determination of a large

  2. PRODUCTION AND RECOIL LOSS OF COSMOGENIC NUCLIDES IN PRESOLAR GRAINS

    International Nuclear Information System (INIS)

    Trappitsch, Reto; Leya, Ingo

    2016-01-01

    Presolar grains are small particles that condensed in the vicinity of dying stars. Some of these grains survived the voyage through the interstellar medium (ISM) and were incorporated into meteorite parent bodies at the formation of the Solar System. An important question is when these stellar processes happened, i.e., how long presolar grains were drifting through the ISM. While conventional radiometric dating of such small grains is very difficult, presolar grains are irradiated with galactic cosmic rays (GCRs) in the ISM, which induce the production of cosmogenic nuclides. This opens the possibility to determine cosmic-ray exposure (CRE) ages, i.e., how long presolar grains were irradiated in the ISM. Here, we present a new model for the production and loss of cosmogenic 3 He, 6,7 Li, and 21,22 Ne in presolar SiC grains. The cosmogenic production rates are calculated using a state-of-the-art nuclear cross-section database and a GCR spectrum in the ISM consistent with recent Voyager data. Our findings are that previously measured 3 He and 21 Ne CRE ages agree within the (sometimes large) 2 σ uncertainties and that the CRE ages for most presolar grains are smaller than the predicted survival times. The obtained results are relatively robust since interferences from implanted low-energy GCRs into the presolar SiC grains and/or from cosmogenic production within the meteoroid can be neglected.

  3. Model for GCR-particle fluxes in stony meteorites and production rates of cosmogenic nuclides

    International Nuclear Information System (INIS)

    Reedy, R.C.

    1984-01-01

    A model is presented for the differential fluxes of galactic-cosmic-ray (GCR) particles with energies above 1 MeV inside any spherical stony meteorite as a function of the meteorite's radius and the sample's depth. This model is based on the Reedy-Arnold equations for the energy-dependent fluxes of GCR particles in the moon and is an extension of flux parameters that were derived for several meteorites of various sizes. This flux is used to calculate the production rates of many cosmogenic nuclides as a function of radius and depth. The peak production rates for most nuclides made by the reactions of energetic GCR particles occur near the centers of meteorites with radii of 40 to 70 g cm -2 . Although the model has some limitations, it reproduces well the basic trends for the depth-dependent production of cosmogenic nuclides in stony meteorites of various radii. These production profiles agree fairly well with measurements of cosmogenic nuclides in meteorites. Some of these production profiles are different than those calculated by others. The chemical dependence of the production rates for several nuclides varies with size and depth. 25 references, 8 figures

  4. On scaling cosmogenic nuclide production rates for altitude and latitude using cosmic-ray measurements

    Science.gov (United States)

    Desilets, Darin; Zreda, Marek

    2001-11-01

    The wide use of cosmogenic nuclides for dating terrestrial landforms has prompted a renewed interest in characterizing the spatial distribution of terrestrial cosmic rays. Cosmic-ray measurements from neutron monitors, nuclear emulsions and cloud chambers have played an important role in developing new models for scaling cosmic-ray neutron intensities and, indirectly, cosmogenic production rates. Unfortunately, current scaling models overlook or misinterpret many of these data. In this paper, we describe factors that must be considered when using neutron measurements to determine scaling formulations for production rates of cosmogenic nuclides. Over the past 50 years, the overwhelming majority of nucleon flux measurements have been taken with neutron monitors. However, in order to use these data for scaling spallation reactions, the following factors must be considered: (1) sensitivity of instruments to muons and to background, (2) instrumental biases in energy sensitivity, (3) solar activity, and (4) the way of ordering cosmic-ray data in the geomagnetic field. Failure to account for these factors can result in discrepancies of as much as 7% in neutron attenuation lengths measured at the same location. This magnitude of deviation can result in an error on the order of 20% in cosmogenic production rates scaled from 4300 m to sea level. The shapes of latitude curves of nucleon flux also depend on these factors to a measurable extent, thereby causing additional uncertainties in cosmogenic production rates. The corrections proposed herein significantly improve our ability to transfer scaling formulations based on neutron measurements to scaling formulations applicable to spallation reactions, and, therefore, constitute an important advance in cosmogenic dating methodology.

  5. Scaling in situ cosmogenic nuclide production rates using analytical approximations to atmospheric cosmic-ray fluxes

    Science.gov (United States)

    Lifton, Nathaniel; Sato, Tatsuhiko; Dunai, Tibor J.

    2014-01-01

    Several models have been proposed for scaling in situ cosmogenic nuclide production rates from the relatively few sites where they have been measured to other sites of interest. Two main types of models are recognized: (1) those based on data from nuclear disintegrations in photographic emulsions combined with various neutron detectors, and (2) those based largely on neutron monitor data. However, stubborn discrepancies between these model types have led to frequent confusion when calculating surface exposure ages from production rates derived from the models. To help resolve these discrepancies and identify the sources of potential biases in each model, we have developed a new scaling model based on analytical approximations to modeled fluxes of the main atmospheric cosmic-ray particles responsible for in situ cosmogenic nuclide production. Both the analytical formulations and the Monte Carlo model fluxes on which they are based agree well with measured atmospheric fluxes of neutrons, protons, and muons, indicating they can serve as a robust estimate of the atmospheric cosmic-ray flux based on first principles. We are also using updated records for quantifying temporal and spatial variability in geomagnetic and solar modulation effects on the fluxes. A key advantage of this new model (herein termed LSD) over previous Monte Carlo models of cosmogenic nuclide production is that it allows for faster estimation of scaling factors based on time-varying geomagnetic and solar inputs. Comparing scaling predictions derived from the LSD model with those of previously published models suggest potential sources of bias in the latter can be largely attributed to two factors: different energy responses of the secondary neutron detectors used in developing the models, and different geomagnetic parameterizations. Given that the LSD model generates flux spectra for each cosmic-ray particle of interest, it is also relatively straightforward to generate nuclide-specific scaling

  6. 600 MeV Simulation of the Production of Cosmogenic Nuclides in Meteorites by Galactic Protons

    CERN Multimedia

    2002-01-01

    A large variety of stable and radioactive nuclides is produced by the interaction of solar and galactic cosmic rays with extraterrestrial matter. Measurements of such cosmogenic nuclides provide information about the constancy of cosmic ray fluxes in space and time and about the irradiation history of individual extraterrestrial objects provided that there exist reliable models describing the production process. For the calculation of the depth dependent production of cosmogenic nuclides in meteorites no satisfactory Therefore, the irradiation of small stony meteorites (radii~$<$~40~cm) by galactic protons is simulated in a series of thick target irradiation experiments at the 600~MeV proton beam of the SC. \\\\ \\\\ The thick targets are spheres (R = 5, 15, 25 cm) and are made out of diorite because of its low water content, its high density (3.0~g/cm|3) and because it provides a good approximation of the chemical composition of some common meteorite clas These spheres will also contain a wide variety of pure...

  7. Validation of cosmogenic nuclide production rate scaling factors through direct measurement

    Energy Technology Data Exchange (ETDEWEB)

    Graham, I.J. E-mail: i.graham@gns.cri.nz; Barry, B.J.; Ditchburn, R.G.; Whitehead, N.E

    2000-10-01

    {sup 7}Be produced in water targets by nuclear interactions of cosmic rays has been measured to determine cosmogenic nuclide production rates as a function of altitude (sea level to 2 km) and geomagnetic latitude (20-79 deg. S). Relative intensities of low energy cosmic ray neutrons have at the same time been measured using neutron monitors based on IGY/NM-64 designed to efficiently thermalise ca. 2-30 MeV neutrons. The research is on-going and we present here preliminary data from the past two years. Water target and neutron flux results are in general agreement, and are consistent with the altitude-dependent scaling factors of Lal [Earth Planet. Sci. Lett. 104 (1991) 4241]. Significant differences between the sea level, latitude-dependent neutron flux data and Lal's predictions are possibly related to the response function of the detector.

  8. Validation of cosmogenic nuclide production rate scaling factors through direct measurement

    CERN Document Server

    Graham, I J; Ditchburn, R G; Whitehead, N E

    2000-01-01

    sup 7 Be produced in water targets by nuclear interactions of cosmic rays has been measured to determine cosmogenic nuclide production rates as a function of altitude (sea level to 2 km) and geomagnetic latitude (20-79 deg. S). Relative intensities of low energy cosmic ray neutrons have at the same time been measured using neutron monitors based on IGY/NM-64 designed to efficiently thermalise ca. 2-30 MeV neutrons. The research is on-going and we present here preliminary data from the past two years. Water target and neutron flux results are in general agreement, and are consistent with the altitude-dependent scaling factors of Lal [Earth Planet. Sci. Lett. 104 (1991) 4241]. Significant differences between the sea level, latitude-dependent neutron flux data and Lal's predictions are possibly related to the response function of the detector.

  9. New approaches investigating production rates of in-situ produced terrestrial cosmogenic nuclides

    Energy Technology Data Exchange (ETDEWEB)

    Merchel, Silke [CEREGE, CNRS-IRD-Universite Aix-Marseille, Aix-en-Provence (France); FZD, Dresden (Germany); Braucher, Regis; Benedetti, Lucilla; Bourles, Didier [CEREGE, CNRS-IRD-Universite Aix-Marseille, Aix-en-Provence (France)

    2010-07-01

    In-situ produced cosmogenic nuclides have proved to be valuable tools for environmental and Earth sciences. However, accurate application of this method is only possible, if terrestrial production rates in a certain environment over a certain time period and their depth-dependence within the exposed material are exactly known. Unfortunately, the existing data and models differ up to several tens of percent. Thus, one of the European project CRONUS-EU goals is the high quality calibration of the {sup 36}Cl production rate by spallation at independently dated surfaces. As part of fulfilling this task we have investigated calcite-rich samples from four medieval landslide areas in the Alps: Mont Granier, Le Claps, Dobratsch, and Veliki Vrh (330-1620 m, 1248-1442 AD). For investigating the depth-dependence of the different nuclear reactions, especially, the muon- and thermal neutron-induced contributions, we have analysed mixtures of carbonates and siliceous conglomerate samples - for {sup 10}Be, {sup 26}Al, and {sup 36}Cl - exposed at different shielding depths and taken from a core drilled in 2005 at La Ciotat, France (from surface to 11 m shielding). AMS of {sup 36}Cl was performed at LLNL and ETH, {sup 10}Be and {sup 26}Al at ASTER.

  10. Timing of Expansions of the Quelccaya Ice Cap, Peru, and Implications for Cosmogenic Nuclide Production Rate Calibration

    Science.gov (United States)

    Lowell, T. V.; Kelly, M. A.; Applegate, P. J.; Smith, C. A.; Phillips, F. M.; Hudson, A. M.

    2010-12-01

    We calibrate the production rate of the cosmogenic nuclide beryllium-10 (10Be) at a low-latitude, high-elevation site, using nuclide concentrations measured in moraine boulders and an independent chronology determined with bracketing radiocarbon dates. The measurement of terrestrial cosmogenic nuclide (TCN) concentrations in earth surface materials has been an important development for understanding a host of earth surface processes. Uncertainty in cosmogenic nuclide production rates has hampered application of this method. Here, we contribute to the estimation of 10Be production rates by reporting both preliminary 10Be concentrations and independent radiocarbon dates from a low latitude, high elevation site. Our study site in the southeastern Peruvian Andes (~13.9°S, 70.9°W, 4850 m asl) is centered on a moraine set, known as the Huancané II moraines, that represents a ~4 km expansion of Quelccaya Ice Cap during late glacial time. At this location, organic material situated both stratigraphically below and above moraines in two adjacent valleys provide material for radiocarbon dating. Based on geomorphic arguments, we correlate results from the two valleys. The timing of ice cap margin advance is bracketed by 13 radiocarbon ages on organic material within the outermost Huancané II moraines that range from 13.6 to 12.5 ka. Two stratigraphic sections upvalley from the moraines yield 6 radiocarbon ages from 11.3 to 12.4 ka, indicating the time of retreat . We computed the probability density function that lies between these two sets of dates, and assign an age of 12.4 ka (+/-???) for the formation of the Huancané II moraines. Calculating beryllium-10 exposure dates from the measured concentrations yield exposure dates that significantly underestimate the independently determined age of the moraine (~8-30%), if existing production rate estimates are used. We suggest that the radiocarbon age for the moraines can be used as a robust independent calibration for 10Be

  11. An introduction to in-situ produced cosmogenic nuclides

    International Nuclear Information System (INIS)

    Norton, K.P.

    2012-01-01

    Cosmogenic nuclides are produced through interactions between cosmic rays and target nuclei in Earth's atmosphere and surface materials. Those which are produced in Earth's atmosphere are termed 'meteoric' while the nuclides produced in surface material are known as in-situ cosmogenic nuclides. The past two decades have seen a proliferation of applications for cosmogenic nuclides. This is primarily due to a revolution in accelerator mass spectrometry, AMS, measurement techniques which has allowed the measurement of very small amounts of nuclides. The following is a brief introduction to the theory and application of in-situ produced cosmogenic nuclide methods. (author). 17 refs., figs., 1 tab.

  12. Constraining local subglacial bedrock erosion rates with cosmogenic nuclides

    Science.gov (United States)

    Wirsig, Christian; Ivy-Ochs, Susan; Christl, Marcus; Reitner, Jürgen; Reindl, Martin; Bichler, Mathias; Vockenhuber, Christof; Akcar, Naki; Schlüchter, Christian

    2014-05-01

    The constant buildup of cosmogenic nuclides, most prominently 10Be, in exposed rock surfaces is routinely employed for dating various landforms such as landslides or glacial moraines. One fundamental assumption is that no cosmogenic nuclides were initially present in the rock, before the event to be dated. In the context of glacially formed landscapes it is commonly assumed that subglacial erosion of at least a few meters of bedrock during the period of ice coverage is sufficient to remove any previously accumulated nuclides, since the production of 10Be ceases at a depth of 2-3 m. Insufficient subglacial erosion leads to overestimation of surface exposure ages. If the time since the retreat of the glacier is known, however, a discordant concentration of cosmogenic nuclides delivers information about the depth of subglacial erosion. Here we present data from proglacial bedrock at two sites in the Alps. Goldbergkees in the Hohe Tauern National Park in Austria and Gruebengletscher in the Grimsel Pass area in Switzerland. Samples were taken inside as well as outside of the glaciers' Little Ice Age extent. Measured nuclide concentrations are analyzed with the help of a MATLAB model simulating periods of exposure or glacial cover of user-definable length and erosion rates.

  13. Cosmic-ray interactions and dating of meteorite stranding surfaces with cosmogenic nuclides

    Energy Technology Data Exchange (ETDEWEB)

    Reedy, R.C.

    1988-01-01

    A wide variety of products from cosmic-ray interactions have been measured in terrestrial or extraterrestrial samples. These ''cosmogenic'' products include radiation damage tracks and rare nuclides that are made by nuclear reactions. They often have been used to determine the fluxes and composition of cosmic-ray particles in the past, but they are usually used to study the history of the ''target'' (such as the time period that it was exposed to cosmic-ray particles). Products made by both the high-energy galactic cosmic rays and energetic particles emitted irregularly from the Sun have been extensively studied. Some of these cosmogenic products, especially nuclides, have been or can be applied to studies of Antarctic meteorite stranding surfaces, the ice surfaces in Antarctica where meteorites have been found. Cosmogenic nuclides studied in samples from Antarctica and reported by others elsewhere in this volume include those in meteorites, especially radionuclides used to determine terrestrial ages, and those made in situ in terrestrial rocks. Cosmogenic nuclides made in the Earth's atmosphere or brought in with cosmic dust have also been studied in polar ice, and it should also be possible to measure nuclides made in situ in ice. As an introduction to cosmogenic nuclides and their applications, cosmic rays and their interactions will be presented below and production systematics of cosmogenic nuclides in these various media will be discussed later. 20 refs., 2 tabs.

  14. Cosmic-ray interactions and dating of meteorite stranding surfaces with cosmogenic nuclides

    International Nuclear Information System (INIS)

    Reedy, R.C.

    1988-01-01

    A wide variety of products from cosmic-ray interactions have been measured in terrestrial or extraterrestrial samples. These ''cosmogenic'' products include radiation damage tracks and rare nuclides that are made by nuclear reactions. They often have been used to determine the fluxes and composition of cosmic-ray particles in the past, but they are usually used to study the history of the ''target'' (such as the time period that it was exposed to cosmic-ray particles). Products made by both the high-energy galactic cosmic rays and energetic particles emitted irregularly from the Sun have been extensively studied. Some of these cosmogenic products, especially nuclides, have been or can be applied to studies of Antarctic meteorite stranding surfaces, the ice surfaces in Antarctica where meteorites have been found. Cosmogenic nuclides studied in samples from Antarctica and reported by others elsewhere in this volume include those in meteorites, especially radionuclides used to determine terrestrial ages, and those made in situ in terrestrial rocks. Cosmogenic nuclides made in the Earth's atmosphere or brought in with cosmic dust have also been studied in polar ice, and it should also be possible to measure nuclides made in situ in ice. As an introduction to cosmogenic nuclides and their applications, cosmic rays and their interactions will be presented below and production systematics of cosmogenic nuclides in these various media will be discussed later. 20 refs., 2 tabs

  15. Measurement of cosmogenic nuclides in extraterrestrial material

    International Nuclear Information System (INIS)

    Nishiizumi, K.; Arnold, J.R.

    1981-01-01

    Meteorites are rocks and pieces of iron-nickel alloy which fall to earth from time to time. They were formed about 4.6 billion years ago when our solar system was started. Thus it has been said that meteorites are the Rosetta stones of our solar system. We use the long-lived radioactive nuclides produced by cosmic ray bombardment, to study the history of the meteorites and also the history of the cosmic rays. When we have these historical facts in our hads, we hope we will be able to understand better how the solar system works, and how it got started. We can also learn more about the nature and origin of the cosmic rays. The accelerator mass spectrometry method helps not only reduce sample size, in most cases by two or three orders of magnitude, but opens another set of cosmogenic nuclides which have not been measured yet. Already 10 Be (t/sub 1/2 = 1.6 x 10 6 y), 36 Cl (3.0 x 10 5 y) and 129 I (1.6 x 10 7 y) in meteorites have been measured by accelerator mass spectrometry [3, 4, 7, 10]. Possible new candidates for measurement in extraterrestrial materials are 26 Al (7.2 x 10 5 y), 41 Ca (1.3 x 10 5 y), 60 Fe (approx. 10 5 y) and 59 Ni (7.6 x 10 4 y). We hope also to measure 146 Sm (1.0 x 10 8 y) and 92 Nb

  16. Authigenic 10Be/9Be ratio signatures of the cosmogenic nuclide production linked to geomagnetic dipole moment variation since the Brunhes/Matuyama boundary.

    Science.gov (United States)

    Simon, Quentin; Thouveny, Nicolas; Bourlès, Didier L; Valet, Jean-Pierre; Bassinot, Franck; Ménabréaz, Lucie; Guillou, Valéry; Choy, Sandrine; Beaufort, Luc

    2016-11-01

    Geomagnetic dipole moment variations associated with polarity reversals and excursions are expressed by large changes of the cosmogenic nuclide beryllium-10 ( 10 Be) production rates. Authigenic 10 Be/ 9 Be ratios (proxy of atmospheric 10 Be production) from oceanic cores therefore complete the classical information derived from relative paleointensity (RPI) records. This study presents new authigenic 10 Be/ 9 Be ratio results obtained from cores MD05-2920 and MD05-2930 collected in the west equatorial Pacific Ocean. Be ratios from cores MD05-2920, MD05-2930 and MD90-0961 have been stacked and averaged. Variations of the authigenic 10 Be/ 9 Be ratio are analyzed and compared with the geomagnetic dipole low series reported from global RPI stacks. The largest 10 Be overproduction episodes are related to dipole field collapses (below a threshold of 2 × 10 22  Am 2 ) associated with the Brunhes/Matuyama reversal, the Laschamp (41 ka) excursion, and the Iceland Basin event (190 ka). Other significant 10 Be production peaks are correlated to geomagnetic excursions reported in literature. The record was then calibrated by using absolute dipole moment values drawn from the Geomagia and Pint paleointensity value databases. The 10 Be-derived geomagnetic dipole moment record, independent from sedimentary paleomagnetic data, covers the Brunhes-Matuyama transition and the whole Brunhes Chron. It provides new and complementary data on the amplitude and timing of millennial-scale geomagnetic dipole moment variations and particularly on dipole moment collapses triggering polarity instabilities.

  17. On the measurement of cosmogenic nuclides in cometary materials

    International Nuclear Information System (INIS)

    Herzog, G.F.; Englert, P.A.J.; Reedy, R.C.; Nishiizumi, K.; Kohl, C.P.; Arnold, J.R.

    1989-01-01

    Determinations of the cosmogenic nuclide concentrations in cometary material will help to define the recent surface history of the comet and its exposure to cosmic rays. In particular, the rates for the removal or mixing of surface material could be studied, and any variations in cosmic-ray intensity implied by the data could be used to infer orbital changes during the last few million years. The measurement of the shorter-lived isotopes poses technical challenges that should be addressed now. The measurement of longer-lived isotopes will be straightforward provided that rates of mass loss are not too high. 46 refs., 2 figs

  18. WebCN: A web-based computation tool for in situ-produced cosmogenic nuclides

    Energy Technology Data Exchange (ETDEWEB)

    Ma Xiuzeng [Department of Physics, Purdue University, West Lafayette, IN 47907 (United States)]. E-mail: hongju@purdue.edu; Li Yingkui [Department of Geography, University of Missouri-Columbia, Columbia, MO 65211 (United States); Bourgeois, Mike [Department of Physics, Purdue University, West Lafayette, IN 47907 (United States); Caffee, Marc [Department of Physics, Purdue University, West Lafayette, IN 47907 (United States); Elmore, David [Department of Physics, Purdue University, West Lafayette, IN 47907 (United States); Granger, Darryl [Department of Earth and Atmospheric Sciences, Purdue University, West Lafayette, IN 47907 (United States); Muzikar, Paul [Department of Physics, Purdue University, West Lafayette, IN 47907 (United States); Smith, Preston [Department of Physics, Purdue University, West Lafayette, IN 47907 (United States)

    2007-06-15

    Cosmogenic nuclide techniques are increasingly being utilized in geoscience research. For this it is critical to establish an effective, easily accessible and well defined tool for cosmogenic nuclide computations. We have been developing a web-based tool (WebCN) to calculate surface exposure ages and erosion rates based on the nuclide concentrations measured by the accelerator mass spectrometry. WebCN for {sup 10}Be and {sup 26}Al has been finished and published at http://www.physics.purdue.edu/primelab/for{sub u}sers/rockage.html. WebCN for {sup 36}Cl is under construction. WebCN is designed as a three-tier client/server model and uses the open source PostgreSQL for the database management and PHP for the interface design and calculations. On the client side, an internet browser and Microsoft Access are used as application interfaces to access the system. Open Database Connectivity is used to link PostgreSQL and Microsoft Access. WebCN accounts for both spatial and temporal distributions of the cosmic ray flux to calculate the production rates of in situ-produced cosmogenic nuclides at the Earth's surface.

  19. Cosmogenic nuclides in the Martian surface: constraints for sample recovery and transport

    International Nuclear Information System (INIS)

    Englert, P.A.J.

    1988-01-01

    Stable and radioactive cosmogenic nuclides and radiation damage effects such as cosmic ray tracks can provide information on the surface history of Mars. A recent overview on developments in cosmogenic nuclide research for historical studies of predominantly extraterrestrial materials was published previously. The information content of cosmogenic nuclides and radiation damage effects produced in the Martian surface is based on the different ways of interaction of the primary galactic and solar cosmic radiation (GCR, SCR) and the secondary particle cascade. Generally the kind and extent of interactions as seen in the products depend on the following factors: (1) composition, energy and intensity of the primary SCR and GCR; (2) composition, energy and intensity of the GCR-induced cascade of secondary particles; (3) the target geometry, i.e., the spatial parameters of Martian surface features with respect to the primary radiation source; (4) the target chemistry, i.e., the chemical composition of the Martian surface at the sampling location down to the minor element level or lower; and (5) duration of the exposure. These factors are not independent of each other and have a major influence on sample taking strategies and techniques

  20. Validation of cosmogenic nuclide production rate scaling factors through direct measurement. Part 2, Production of 7Be and 10Be in water targets deployed in the Southern Hemisphere, 1997-2001

    International Nuclear Information System (INIS)

    Graham, I.J.; Barry, B.J.; Ditchburn, R.G.; Zondervan, A.

    2005-01-01

    Sealed containers of de-ionised water were exposed to cosmic-rays at seven sites in Australia, New Zealand and Antarctica, covering a range of altitudes and geomagnetic latitudes, over time periods of six months to three years (1997-2001). After isotopic analysis by gamma counting (for 7 Be) and accelerator mass spectrometry (for 10 Be), the data obtained were corrected to obtain relative production factors (i.e., 'k' values). This report presents a full description of the target design, isotope extraction, and measurement procedures employed. It thus provides the raw data from which cosmogenic nuclide production rates for the Southern Hemisphere can be calculated, and scaling factors used in surface exposure dating can be independently validated. (author). 35 refs., 7 figs., 5 tabs

  1. Neogene basin infilling from cosmogenic nuclides (10Be and 21Ne) in Atacama, Chile

    Science.gov (United States)

    Sanchez, Caroline; Regard, Vincent; Carretier, Sébastien; Riquelme, Rodrigo; Blard, Pierre-Henri; Campos, Eduardo; Brichau, Stéphanie; Lupker, Marteen; Hérail, Gérard

    2017-04-01

    In the hyperarid Atacama Desert, northern Chile, Neogene sediments host copper rich layers (exotic supergene mineralization). Current mines are excavated into relatively thin (production (quickly decreasing with depth) and disintegration (not for 21Ne). Sampling depths are at ˜100 m and at ˜50 m below the desert surface. First, 21Ne gives lower boundaries for upstream erosion rates or local sedimentation rate. These bounds are between 2 and 10 m/Ma, which is quite important for the area. The ratio between the two cosmogenic nuclides indicate a maximum burial age of 12 Ma (minimal erosion rate of 15 m/Ma) and is surprisingly similar from bottom to top, indicating a probable rapid infilling. We finally processed a Monte-Carlo inversion. This inversion helps taking into account the post-deposition muonic production of cosmogenic nuclides. Inversion results is dependent on the muonic production scheme. Interestingly, the similarity in concentrations from bottom to top pleads for quite low production at depth. Our data finally indicates a quick infilling between 12.5 and 10 Ma BP accounting for ˜100 m of deposition (minimum sedimentation rate of 40 m/Ma).

  2. Estimating cumulative soil accumulation rates with in situ-produced cosmogenic nuclide depth profiles

    International Nuclear Information System (INIS)

    Phillips, William M.

    2000-01-01

    A numerical model relating spatially averaged rates of cumulative soil accumulation and hillslope erosion to cosmogenic nuclide distribution in depth profiles is presented. Model predictions are compared with cosmogenic 21 Ne and AMS radiocarbon data from soils of the Pajarito Plateau, New Mexico. Rates of soil accumulation and hillslope erosion estimated by cosmogenic 21 Ne are significantly lower than rates indicated by radiocarbon and regional soil-geomorphic studies. The low apparent cosmogenic erosion rates are artifacts of high nuclide inheritance in cumulative soil parent material produced from erosion of old soils on hillslopes. In addition, 21 Ne profiles produced under conditions of rapid accumulation (>0.1 cm/a) are difficult to distinguish from bioturbated soil profiles. Modeling indicates that while 10 Be profiles will share this problem, both bioturbation and anomalous inheritance can be identified with measurement of in situ-produced 14 C

  3. Cosmogenic nuclide shielding corrections determined via MCNPX radiation transport and spallation cross sections

    Science.gov (United States)

    Argento, D.; Reedy, R. C.; Stone, J. O.

    2011-12-01

    Cosmogenic Nuclides (CNs) are a critical new tool for geomorphology, allowing researchers to date Earth surface events and measure process rates [1]. Prior to CNs, many of these events and processes had no absolute method for measurement and relied entirely on relative methods. Reliable absolute measurement methods impact research constraining ice age extents and provide important climatic data via well constrained erosion rates, etc. [2]. Continuing to improve CN methods is critical for these sciences. Significant progress has been made in the last two decades in refining the method and reducing analytic uncertainties [1,3]. CRONUS-Earth, a collaboration of cosmogenic nuclide researchers, has been developing calibration data and scaling methods to provide a self-consistent platform for use in interpreting nuclide concentration values into geologic data. However, several aspects of the radiation cascade have been exceedingly difficult to measure empirically with either accuracy or spatial extent. One such aspect is the angular distribution of secondary cosmic rays that are energetic enough to produce cosmogenic nuclides via spallation. Researchers studying the angular distribution of such cosmic rays have usually described the distribution as (cos(Θ))^m. Currently, the standard corrections, assume an m of 2.3, which is based on very sparse data sets with very limited spatial and altitude variation [1,4,5]. Researchers using CNs must know the production rate at the sample location, and then make corrections for the portion of the sky that is blocked by nearby topography. If the shielding correction model currently used is too simplistic, this introduces error into the final results. In this study, a Monte Carlo method radiation transport code, MCNPX is used to model the Galactic Cosmic Ray (GCR) radiation impinging on the upper atmosphere and tracks the resulting secondary particles through a model of the Earth's atmosphere. Angle and energy distributions are

  4. Applications of in situ cosmogenic nuclides in the geologic site characterization of Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Gosse, J.C.; Harrington, C.D.

    1995-01-01

    The gradual buildup of rare isotopes from interactions between cosmic rays and atoms in an exposed rock provides a new method of directly determining the exposure age of rock surfaces. The cosmogenic nuclide method can also provide constraints on erosion rates and the length of time surface exposure was interrupted by burial. Numerous successful applications of the technique have been imperative to the complete surface geologic characterization of Yucca Mountain, Nevada, a potential high level nuclear waste repository. In this short paper, we summarize the cosmogenic nuclide method and describe with examples some the utility of the technique in geologic site characterization. We report preliminary results from our ongoing work at Yucca Mountain

  5. Cosmogenic nuclides principles, concepts and applications in the earth surface sciences

    CERN Document Server

    Dunai, Tibor J

    2010-01-01

    This is the first book to provide a comprehensive and state-of-the-art introduction to the novel and fast-evolving topic of in-situ produced cosmogenic nuclides. It presents an accessible introduction to the theoretical foundations, with explanations of relevant concepts starting at a basic level and building in sophistication. It incorporates, and draws on, methodological discussions and advances achieved within the international CRONUS (Cosmic-Ray Produced Nuclide Systematics) networks. Practical aspects such as sampling, analytical methods and data-interpretation are discussed in detail and an essential sampling checklist is provided. The full range of cosmogenic isotopes is covered and a wide spectrum of in-situ applications are described and illustrated with specific and generic examples of exposure dating, burial dating, erosion and uplift rates and process model verification. Graduate students and experienced practitioners will find this book a vital source of information on the background concepts and...

  6. Constraining Quaternary ice covers and erosion rates using cosmogenic 26Al/10Be nuclide concentrations

    Science.gov (United States)

    Knudsen, Mads Faurschou; Egholm, David Lundbek

    2018-02-01

    Paired cosmogenic nuclides are often used to constrain the exposure/burial history of landforms repeatedly covered by ice during the Quaternary, including tors, high-elevation surfaces, and steep alpine summits in the circum-Arctic regions. The approach generally exploits the different production rates and half-lives of 10Be and 26Al to infer past exposure/burial histories. However, the two-stage minimum-limiting exposure and burial model regularly used to interpret the nuclides ignores the effect of variable erosion rates, which potentially may bias the interpretation. In this study, we use a Monte Carlo model approach to investigate systematically how the exposure/burial and erosion history, including variable erosion and the timing of erosion events, influence concentrations of 10Be and 26Al. The results show that low 26Al/10Be ratios are not uniquely associated with prolonged burial under ice, but may as well reflect ice covers that were limited to the coldest part of the late Pleistocene combined with recent exhumation of the sample, e.g. due to glacial plucking during the last glacial period. As an example, we simulate published 26Al/10Be data from Svalbard and show that it is possible that the steep alpine summits experienced ice-free conditions during large parts of the late Pleistocene and varying amounts of glacial erosion. This scenario, which contrasts with the original interpretation of more-or-less continuous burial under non-erosive ice over the last ∼1 Myr, thus challenge the conventional interpretation of such data. On the other hand, high 26Al/10Be ratios do not necessarily reflect limited burial under ice, which is the common interpretation of high ratios. In fact, high 26Al/10Be ratios may also reflect extensive burial under ice, combined with a change from burial under erosive ice, which brought the sample close to the surface, to burial under non-erosive ice at some point during the mid-Pleistocene. Importantly, by allowing for variable

  7. Cosmogenic nuclides in recently fallen meteorites: Evidence for galactic cosmic ray variations during the period 1967--1978

    International Nuclear Information System (INIS)

    Evans, J.C.; Reeves, J.H.; Rancitelli, L.A.; Bogard, D.D.

    1982-01-01

    Cosmogenic radionuclides were measured on 48 fragments of 24 meteorites which fell between 1967 and 1978. Nondestructive gamma counting techniques were used to obtain data on 7 Be, 46 Sc, 48 V, 51 Cr, 54 Mn, 56 Co, 57 Co, 58 Co, and 60 Co on at least some of the samples. Sodium 22 and 26 Al measurements are reported on all 48 samples. In addition, new rare gas data and exposure ages are reported for the meteorites Guibga, Gorlovka, Dhajala, Louisville, Acapulco, Jilin, Kabo, Alta-Ameen, and Canon City. The cosmogenic radioisotope and rare gas data are interpreted in terms of a time dependent modulation of galactic cosmic rays spanning one full 11 year sun spot cycle. Special attention is given to the data on 22 Na, 46 Sc, 54 Mn, and 48 V with either 26 Al or 22 Ne/ 21 Ne used to provide a shielding correction. The shielding normalized data using the 26 Al method appear to correlate well with calculated production rates scaled against the Deep River neutron monitor. The data for the four isotopes are consistent with a production rate variation of a factor of 2.5--3 between solar maximum and solar minimum for sun spot cycle 20. These data demonstrate that the production rates of cosmic ray-produced nuclides in meteorites vary considerably according to modulation by the 11-year solar cycle and support the concept that variations of solar-modulated, cosmic ray flux of similar magnitude have occurred over much longer time periods

  8. The production rate of cosmogenic deuterium at the Moon's surface

    Science.gov (United States)

    Füri, Evelyn; Deloule, Etienne; Trappitsch, Reto

    2017-09-01

    The hydrogen (D/H) isotope ratio is a key tracer for the source of planetary water. However, secondary processes such as solar wind implantation and cosmic ray induced spallation reactions have modified the primordial D/H signature of 'water' in all rocks and soils recovered on the Moon. Here, we re-evaluate the production rate of cosmogenic deuterium (D) at the Moon's surface through ion microprobe analyses of hydrogen isotopes in olivines from eight Apollo 12 and 15 mare basalts. These in situ measurements are complemented by CO2 laser extraction-static mass spectrometry analyses of cosmogenic noble gas nuclides (3He, 21Ne, 38Ar). Cosmic ray exposure (CRE) ages of the mare basalts, derived from their cosmogenic 21Ne content, range from 60 to 422 Ma. These CRE ages are 35% higher, on average, than the published values for the same samples. The amount of D detected in the olivines increases linearly with increasing CRE ages, consistent with a production rate of (2.17 ± 0.11) ×10-12 mol(g rock)-1 Ma-1. This value is more than twice as high as previous estimates for the production of D by galactic cosmic rays, indicating that for water-poor lunar samples, i.e., samples with water concentrations ≤50 ppm, corrected D/H ratios have been severely overestimated.

  9. Using Multiple Cosmogenic Nuclides to Investigate Ice Elevation Changes in the Ellsworth Mountains, Antarctica

    Science.gov (United States)

    Marrero, Shasta; Hein, Andy; Sugden, David; Woodward, John; Dunning, Stuart; Freeman, Stewart; Shanks, Richard

    2015-04-01

    Well-dated geologic data points provide important indicators that can be used for the reconstruction of ice sheet dynamics and as constraints in ice sheet models predicting future change. Cosmogenic nuclides, which accumulate in rocks exposed at the earth's surface, can be used to directly date the exposure age of the rock surfaces that have been created through glacial erosion or deposition. The technique requires a detailed understanding of the local geomorphology as well as awareness of the post-depositional processes that may affect the interpretation of exposure ages. Surface exposure ages (10Be, 26Al, 21Ne, and 36Cl) from local limestone bedrock and other glacially deposited exotic lithologies provide a history spanning from 0 to more than 1 million years in the Patriot, Independence, and Marble Hills in the southern Ellsworth Mountains, Antarctica. Using the new surface exposure ages combined with geomorphological mapping, we will discuss the implications for the glacial history of the southern Ellsworth Mountains.

  10. Ice Elevation Changes in the Ellsworth Mountains, Antarctica Using Multiple Cosmogenic Nuclides

    Science.gov (United States)

    Marrero, S.; Hein, A.; Sugden, D.; Woodward, J.; Dunning, S.; Reid, K.

    2014-12-01

    Well-dated geologic data points provide important indicators that can be used for the reconstruction of ice sheet dynamics and as constraints in ice sheet models predicting future change. Cosmogenic nuclides, which accumulate in rocks exposed at the earth's surface, can be used to directly date the exposure age of the rock surfaces that have been created through glacial erosion or deposition. The technique requires a detailed understanding of the local geomorphology as well as awareness of the post-depositional processes that may affect the interpretation of exposure ages. Initial surface exposure ages (10Be, 26Al, 21Ne, and 36Cl ) from local limestone bedrock and other glacially deposited exotic lithologies provide a history spanning from 0 to 1.1 Ma in the Patriot, Independence, and Marble Hills in the southern Ellsworth Mountains, Antarctica. Using the new surface exposure ages combined with geomorphological mapping, we will discuss the implications for the glacial history of the southern Ellsworth Mountains.

  11. Early Acheulean technology in the Rietputs Formation, South Africa, dated with cosmogenic nuclides.

    Science.gov (United States)

    Gibbon, Ryan J; Granger, Darryl E; Kuman, Kathleen; Partridge, Timothy C

    2009-02-01

    An absolute dating technique based on the build-up and decay of (26)Al and (10)Be in the mineral quartz provides crucial evidence regarding early Acheulean hominid distribution in South Africa. Cosmogenic nuclide burial dating of an ancient alluvial deposit of the Vaal River (Rietputs Formation) in the western interior of South Africa shows that coarse gravel and sand aggradation there occurred ca 1.57+/-0.22Ma, with individual ages of samples ranging from 1.89+/-0.19 to 1.34+/-0.22Ma. This was followed by aggradation of laminated and cross-bedded fine alluvium at ca 1.26+/-0.10Ma. The Rietputs Formation provides an ideal situation for the use of the cosmogenic nuclide burial dating method, as samples could be obtained from deep mining pits at depths ranging from 7 to 16 meters. Individual dates provide only a minimum age for the stone tool technology preserved within the deposits. Each assemblage represents a time averaged collection. Bifacial tools distributed throughout the coarse gravel and sand unit can be assigned to an early phase of the Acheulean. This is the first absolute radiometric dated evidence for early Acheulean artefacts in South Africa that have been found outside of the early hominid sites of the Gauteng Province. These absolute dates also indicate that handaxe-using hominids inhabited southern Africa as early as their counterparts in East Africa. The simultaneous appearance of the Acheulean in different parts of the continent implies relatively rapid technology development and the widespread use of large cutting tools in the African continent by ca 1.6Ma.

  12. Glacial erosion of high-elevation low-relief summits on passive continental margins constrained by cosmogenic nuclides

    DEFF Research Database (Denmark)

    Andersen, Jane Lund; Egholm, David Lundbek; Knudsen, Mads Faurschou

    We present a new, extensive in-situ cosmogenic 10Be and 26Al dataset from high-elevation low-relief summits along Sognefjorden in Norway. Contrary to previous studies of high-elevation low-relief summits in cold regions, we find only limited cosmogenic nuclide inheritance in bedrock surfaces......, indicating that warm-based ice eroded the summits during the last glacial period. From the isotope concentrations we model denudation histories using a recently developed Monte Carlo Markov Chain inversion model (Knudsen et al, 2015). The model relies on the benthic d18O curve (Lisiecki and Raymo, 2005...

  13. Experimental Determination of the Cosmogenic Ar Production Rate From Ca

    Science.gov (United States)

    Niedermann, S.; Schäfer, J. M.; Wieler, R.; Naumann, R.

    2005-12-01

    Cosmogenic 38Ar is produced in terrestrial surface rocks by spallation of target nuclides, in particular K and Ca. Though the presence of cosmogenic Ar in Ca-rich minerals has been demonstrated earlier [1], is has proven difficult to establish its production rate. To circumvent problems connected to 36Ar production by 35Cl neutron capture and different production rates from K and Ca, we have analyzed the noble gases in seven pyroxene separates (px) from the Antarctic Dry Valleys which are essentially free of Cl and K. The px were obtained from dolerite rocks, for which 3He and 21Ne exposure ages from 1.5 to 6.5 Ma have been reported [2]. The noble gases were extracted in two or three heating steps at GFZ Potsdam, yielding 38Ar/36Ar ratios up to 0.2283 ± 0.0008 (air: 0.1880). Ca (3.7-11.2 wt. %) is expected to be the only relevant target element for Ar production in the five pure px (ratio of 1.5 ± 0.2, we obtain cosmogenic 38Ar concentrations between 130 and 530x106 atoms/g. The 38Ar production rate was calculated based on 21Ne exposure ages [2], corrected for elevated nuclide production in Antarctica due to prevailing low air pressure and for the revised 21Ne production rate from Si. We obtain values between 188 ± 17 and 243 +110/-24 atoms (g Ca)-1 a-1 at sea level and high (northern) latitudes for four out of the five pure px, while one yields a very high value of 348 ± 70 atoms (g Ca)-1 a-1. Values above 250 atoms (g Ca)-1 a-1 are also obtained from two less pure px containing 0.3 and 0.9% K and from one feldspar/quartz accumulate, indicating that the production rate from K may be higher than that from Ca. The weighted mean (excluding the outlier) of ~200 atoms (g Ca)-1 a-1 is in excellent agreement with Lal's [3] theoretical estimate. [1] Renne et al., EPSL 188 (2001) 435. [2] Schäfer et al., EPSL 167 (1999) 215. [3] Lal, EPSL 104 (1991) 424.

  14. Deglacial history of the Pensacola Mountains, Antarctica from glacial geomorphology and cosmogenic nuclide surface exposure dating

    Science.gov (United States)

    Bentley, M. J.; Hein, A. S.; Sugden, D. E.; Whitehouse, P. L.; Shanks, R.; Xu, S.; Freeman, S. P. H. T.

    2017-02-01

    The retreat history of the Antarctic Ice Sheet is important for understanding rapid deglaciation, as well as to constrain numerical ice sheet models and ice loading models required for glacial isostatic adjustment modelling. There is particular debate about the extent of grounded ice in the Weddell Sea embayment at the Last Glacial Maximum, and its subsequent deglacial history. Here we provide a new dataset of geomorphological observations and cosmogenic nuclide surface exposure ages of erratic samples that constrain the deglacial history of the Pensacola Mountains, adjacent to the present day Foundation Ice Stream and Academy Glacier in the southern Weddell Sea embayment. We show there is evidence of at least two glaciations, the first of which was relatively old and warm-based, and a more recent cold-based glaciation. During the most recent glaciation ice thickened by at least 450 m in the Williams Hills and at least 380 m on Mt Bragg. Progressive thinning from these sites was well underway by 10 ka BP and ice reached present levels by 2.5 ka BP, and is broadly similar to the relatively modest thinning histories in the southern Ellsworth Mountains. The thinning history is consistent with, but does not mandate, a Late Holocene retreat of the grounding line to a smaller-than-present configuration, as has been recently hypothesized based on ice sheet and glacial isostatic modelling. The data also show that clasts with complex exposure histories are pervasive and that clast recycling is highly site-dependent. These new data provide constraints on a reconstruction of the retreat history of the formerly-expanded Foundation Ice Stream, derived using a numerical flowband model.

  15. Terrestrial Cosmogenic-Nuclide Dating of Alluvial Fans in Death Valley, California

    Science.gov (United States)

    Machette, Michael N.; Slate, Janet L.; Phillips, Fred M.

    2008-01-01

    We have used terrestrial cosmogenic nuclides (TCN) to establish the age of some of the most extensive Quaternary alluvial fans in Death Valley, California. These intermediate-age alluvial fans are most extensive on the western side of the valley, where tectonic deformation is considerably less pronounced than on the eastern side of the valley. These fans are characterized by a relatively smooth, densely packed desert pavement formed by well-varnished (blackened) clasts. These surfaces have been mapped as the Q2 gravel by previous workers and as unit Qai (intermediate age) by us. However, the intermediate-age gravels probably contain multiple subunits, as evidenced by slight differences in morphologic expression, soil formation, and inset geomorphic relations. The TCN technique used herein sums the cosmogenic 36Cl in approximately 2.5-meter-deep profiles through soil and host alluvium, thus avoiding some of the problems associated with the more typical surface-exposure dating of boulders or smaller clasts. Our TCN 36Cl dating of 12 depth profiles indicates that these intermediate-age (Qai) alluvial fans range from about 100 to 40 kilo-annum (ka), with a mean age of about 70 ka. An alternative interpretation is that alluvial unit Qai was deposited in two discrete episodes from 90 to 80 ka and from 60 to 50 ka, before and after MIS (marine oxygen-isotope stage) 4 (respectively). Without an intermediate-age unit, such as MIS 4 lake deposits, we can neither disprove nor prove that Qai was deposited in two discrete intervals or over a longer range of time. Thus, in Death Valley, alluvial unit Qai largely brackets MIS 4, which is not associated with a deep phase of Lake Manly. These Qai fans extend to elevations of about -46 meters (150 feet below sea level) and have not been transgressed by Lake Manly, suggesting that MIS 4 or MIS 2 lakes were rather shallow in Death Valley, perhaps because they lacked inflow from surface runoff of the Sierra Nevada drainages through

  16. Determining timing of Alaska Range exhumation and glaciation through cosmogenic nuclide burial dating.

    Science.gov (United States)

    Sortor, R. N.; Goehring, B. M.; Bemis, S. P.; Ruleman, C.; Nichols, K. A.; Ward, D. J.; Frothingham, M.

    2017-12-01

    The Alaska Range is a transpressional orogen with modern exhumation initiating 6 Ma. The stratigraphic record of unroofing and uplift of the foreland basin is largely preserved along the northern flank of the Alaska Range in the Pliocene-Pleistocene aged Nenana Gravel, an extensive alluvial fan and braidplain deposit. Chronometric control on the Nenana Gravel is largely lacking, with the limited available age control based on a single Ar-Ar tephra date in an underlying unit and via stratigraphic inferences for the upper portions. Higher-resolution dating of the Nenana Gravel unit is imperative in order to quantify deposition rates and the timing of uplift and deformation of the foreland basin. Furthermore, a glacial unit has been found to lie unconformably on top of the unit at Suntrana Creek and may represent the initiation of glacial advances in the Alaska Range. We present a suite of 26Al/10Be cosmogenic nuclide burial ages collected from the lower, middle, and upper sections of the Nenana Gravel at Suntrana Creek, as well as the overlying glacial unit. Three samples from the lower Nenana Gravel yield an isochron burial age of 4.42+0.67/-0.13 Ma, which represents initiation of Nenana Gravel deposition and may equate to early unroofing of the Alaska Range. Two samples collected from the middle of the Nenana Gravel unit produced an average simple burial age of 2.25+/-0.45 Ma, with a single sample stratigraphically above dating to 0.99 +/-1.60. Two samples from the upper-most portion of the Nenana Gravel yielded an average simple burial age of 1.27+/-0.22 Ma, and one sample from the glacial unit overlying the Nenana Gravel was dated to 0.97+/-0.06 Ma, representing one of the earliest glacial advances in the region. In addition, the age of the glacial unit provides a minimum age for inception of foreland basin uplift and abandonment of the Nenana Gravel in this region.

  17. Cosmogenic Nuclide Exposure Dating of the Tiltill Rock Avalanche, Yosemite National Park

    Science.gov (United States)

    Ford, K. R.; Pluhar, C. J.; Stone, J. O.; Stock, G. M.; Zimmerman, S. R.

    2013-12-01

    Yosemite National Park serves as an excellent natural laboratory for studying rock falls and rock avalanches because these are the main processes modifying the nearly vertical slopes of this recently glaciated landscape. Mass wasting represents a significant hazard in the region and the database of previous rock falls and other mass wasting events in Yosemite is extensive, dating back to the mid-1800s. However, this record is too short to capture the recurrence characteristics and triggering mechanisms of the very largest events, necessitating studies of the geologic record of mass wasting. Rock falls and rock avalanches are readily dated by cosmogenic nuclide methods due to their instantaneous formation, and results can be tied to triggering events such as seismic activity (e.g. Stock et al., 2009). Here, we apply exposure dating to the Holocene Tiltill rock avalanche north of Hetch Hetchy Reservoir. The deposit comprises what appear to be two separate lobes of rock and debris, yielding a total volume of ~3.1 x 106 m3. Assuming an erosion rate of 0.0006 cm/yr and neglecting snowpack shielding, preliminary data suggest a mean exposure age of 11,000 + 600 year B.P. for both deposits, indicating that they were emplaced in a single event. The age of the Tiltill 'slide' is similar to earthquakes on the Owens Valley Fault between 10,800 + 600 and 10,200 + 200 cal year B.P. (Bacon, 2007) and the White Mountain Fault, ~10,000 cal year B.P. (Reheis, 1996; DePolo, 1989). Given that movement on the Owens Valley fault in 1872 caused a number of rock falls in Yosemite and the coincidence of ages between the Tiltill 'slide' and paleoseismic events, a large earthquake in Eastern Sierra Nevada may have triggered this event. Other trigger events are also possibilities, but only through compilation of a database of large rock avalanches can statistically significant groupings of events begin to demonstrate whether seismic triggering is a dominant process.

  18. Do cosmogenic nuclides (10Be, 14C , 21Ne, 26Al) track late Quaternary climate changes on the Altiplano?

    Science.gov (United States)

    Hippe, K.; Kober, F.; Zeilinger, G.; Ivy-Ochs, S.; Kubik, P.; Maden, C.; Wieler, R.

    2010-12-01

    The high Altiplano plateau is the most prominent element of the Central Andes, separating the Andean Cordilleras between 15° to 22° S. It represents a tectonically quiet, intramontane basin with arid to semi-arid climate, low relief and internal drainage. Throughout the late Quaternary regional climate on the Altiplano repeatedly changed between wet and dry conditions [1]. The influence of climate on the plateau evolution during the Pleistocene/Holocene is unclear, however, as data on erosion processes and rates on the Altiplano are sparse. Here, we present a multiple-nuclide study investigating surface denudation at the eastern Altiplano of Bolivia (16°-17° S) on millennial and longer timescales. The aim is a better understanding of the complex feedback between climate, tectonics and geomorphology on the topographic evolution of the Andes. Catchment-wide denudation (CWD) rates are provided for a 150 km NW-SE transect along the Altiplano edge based on the analyses of cosmogenic 10Be, 26Al, 21Ne and in-situ 14C in river-borne sediment. Single nuclide CWD rates obtained for 10Be, 26Al and 21Ne are similar for all three nuclides and on the order of 3-37 mm/ka. Thus, the calculated denudation rates provide an averaged denudation history dating back at least to the middle Pleistocene. Denudation rates correlate positively with the mean basin hillslope, which is mainly controlled by basin lithology. For most catchments both, the 26Al/10Be ratios and the 21Ne/10Be ratios indicate a complex erosion/exposure history with probably several periods of sediment storage and burial/shielding totalling ~0.5 - 1.2 Ma. Local geomorphology featuring low slopes and low relief, small terraces and local floodplains also suggests that sediment transport might have been periodically ineffective. Concentrations of in-situ produced short-lived 14C are significantly lower than expected from the concentrations of the long-lived and stable cosmogenic nuclides. This would indicate a 30

  19. 10Be systematics in the Tsangpo-Brahmaputra catchment: the cosmogenic nuclide legacy of the eastern Himalayan syntaxis

    Directory of Open Access Journals (Sweden)

    M. Lupker

    2017-08-01

    Full Text Available The Tsangpo-Brahmaputra River drains the eastern part of the Himalayan range and flows from the Tibetan Plateau through the eastern Himalayan syntaxis downstream to the Indo-Gangetic floodplain and the Bay of Bengal. As such, it is a unique natural laboratory to study how denudation and sediment production processes are transferred to river detrital signals. In this study, we present a new 10Be data set to constrain denudation rates across the catchment and to quantify the impact of rapid erosion within the syntaxis region on cosmogenic nuclide budgets and signals. The measured 10Be denudation rates span around 2 orders of magnitude across individual catchments (ranging from 0.03 to > 4 mm yr−1 and sharply increase as the Tsangpo-Brahmaputra flows across the eastern Himalaya. The increase in denudation rates, however, occurs  ∼  150 km downstream of the Namche Barwa–Gyala Peri massif (NBGPm, an area which has been previously characterized by extremely high erosion and exhumation rates. We suggest that this downstream lag is mainly due to the physical abrasion of coarse-grained, low 10Be concentration, landslide material produced within the syntaxis that dilutes the upstream high-concentration 10Be flux from the Tibetan Plateau only after abrasion has transferred sediment to the studied sand fraction. A simple abrasion model produces typical lag distances of 50 to 150 km compatible with our observations. Abrasion effects reduce the spatial resolution over which denudation can be constrained in the eastern Himalayan syntaxis. In addition, we also highlight that denudation rate estimates are dependent on the sediment connectivity, storage, and quartz content of the upstream Tibetan Plateau part of the catchment, which tends to lead to an overestimation of downstream denudation rates. While no direct 10Be denudation measurements were made in the syntaxis, the dilution of the upstream 10Be signal, measured in Tsangpo

  20. Surface Uplift Rate Constrained by Multiple Terrestrial Cosmogenic Nuclides: Theory and Application from the Central Andean Plateau

    Science.gov (United States)

    McPhillips, D. F.; Hoke, G. D.; Niedermann, S.; Wittmann, H.

    2015-12-01

    There is widespread interest in quantifying the growth and decay of topography. However, prominent methods for quantitative determinations of paleoelevation rely on assumptions that are often difficult to test. For example, stable isotope paleoaltimetry relies on the knowledge of past lapse rates and moisture sources. Here, we demonstrate how cosmogenic 10Be - 21Ne and/or 10Be - 26Al sample pairs can be applied to provide independent estimates of surface uplift rate using both published data and new data from the Atacama Desert. Our approach requires a priori knowledge of the maximum age of exposure of the sampled surface. Ignimbrite surfaces provide practical sampling targets. When erosion is very slow (roughly, ≤1 m/Ma), it is often possible to constrain paleo surface uplift rate with precision comparable to that of stable isotopic methods (approximately ±50%). The likelihood of a successful measurement is increased by taking n samples from a landscape surface and solving for one regional paleo surface uplift rate and n local erosion rates. In northern Chile, we solve for surface uplift and erosion rates using three sample groups from the literature (Kober et al., 2007). In the two lower elevation groups, we calculate surface uplift rates of 110 (+60/-12) m/Myr and 160 (+120/-6) m/Myr and estimate uncertainties with a bootstrap approach. The rates agree with independent estimates derived from stream profile analyses nearby (Hoke et al., 2007). Our calculated uplift rates correspond to total uplift of 1200 and 850 m, respectively, when integrated over appropriate timescales. Erosion rates were too high to reliably calculate the uplift rate in the third, high elevation group. New cosmogenic nuclide analyses from the Atacama Desert are in progress, and preliminary results are encouraging. In particular, a replicate sample in the vicinity of the first Kober et al. (2007) group independently yields a surface uplift rate of 110 m/Myr. Compared to stable isotope

  1. Erosion of mountain plateaus along Sognefjord, Norway, constrained by cosmogenic nuclides

    DEFF Research Database (Denmark)

    Andersen, Jane Lund; Egholm, David Lundbek; Knudsen, Mads Faurschou

    –climate–erosion) hypothesis. Journal of Geodynamics 47(2), 72-95, 2009. Steer et al. Bimodal Plio-Quaternary glacial erosion of fjords and low-relief surfaces in Scandinavia. Na- ture Geoscience 5(9), 635-639, 2012. Egholm et al. The periglacial engine of mountain erosion – Part 2: Modelling large-scale landscape evolu- tion......Norway is famous for its deeply incised, steep-sided fjords, carved out by glacial erosion. The high relief of the fjords stands in contrast to the extensive areas of relatively low relief found between the fjords. The origin and development of these low-relief areas remain debated. The classical...... instead to a significant impact of glacial and periglacial erosion processes on the long-term development of the low-relief surfaces (Egholm et al. 2015). Here, we present a large new dataset of in-situ produced cosmogenic 10Be and 26Al in bedrock and boulders from the high, flat summit surfaces along...

  2. Unstable isotopes in a stable landscape?- Untangling Southern Africa's geological history with fission tracks and cosmogenic nuclides

    International Nuclear Information System (INIS)

    Belton, D.; Brown, R.; Fink, D.

    1998-01-01

    Full text: In the absence of direct evidence for burial and subsequent exposure of the land surface in the interior of Africa, researchers have argued for surface ages of several hundred million years. The proposition that landforms may have persisted at the surface for these extensive periods of time has a number of important implications. It suggests that the processes of tectonics and geomorphic evolution have been essentially absent for a period of up to 500 Ma. As a consequence, the persistence of these landscapes would require extremely low rates of weathering and erosion. Although this view of continental evolution has been widely held for several decades, recent studies suggest that continental interiors in Africa, Australia, Brazil and north America, have been subject to denudation in the order of several kilometres during the last 60 Ma. This study applies the complimentary techniques of apatite fission track and cosmogenic nuclide analysis, in an effort to measure both the long-term crustal-scale denudation and the short-term erosion rates, of which denudation is a function. We present preliminary data from the Zimbabwe Craton that illustrates the utility of such techniques in addressing both local and regional geological questions. The study provides a detailed picture of complex tectonic responses as well as large scale denudation over extended periods of time

  3. Quantifying Quaternary Deformation in the Eastern Cordillera of the Colombian Andes Using Cosmogenic Nuclide Geochronology and Fluvial Geomorphology

    Science.gov (United States)

    Dalman, E.; Taylor, M. H.; Veloza-fajardo, G.; Mora, A.

    2014-12-01

    Northwest South America is actively deforming through the interaction between the Nazca, South American, and Caribbean plates. Though the Colombian Andes are well studied, much uncertainty remains in the rate of Quaternary deformation along the east directed frontal thrust faults hundreds of kilometers in board from the subduction zones. The eastern foothills of the Eastern Cordillera (EC) preserve deformed landforms, allowing us to quantify incision rates. Using 10Be in-situ terrestrial cosmogenic nuclide (TCN) geochronology, we dated 2 deformed fluvial terraces in the hanging wall of the Guaicaramo thrust fault. From the 10Be concentration and terrace profile relative to local base level, we calculated incision rates. We present a reconstructed slip history of the Guaicaramo thrust fault and its Quaternary slip rate. Furthermore, to quantify the regional Quaternary deformation, we look at the fluvial response to tectonic uplift. Approximately 20 streams along the eastern foothills of the Eastern Cordillera (EC) were studied using a digital elevation model (DEM). From the DEM, longitudinal profiles were created and normalized channel steepness (Ksn) values calculated from plots of drainage area vs. slope. Knickpoints in the longitudinal profiles can record transient perturbations or differential uplift. Calculated Ksn values indicate that the EC is experiencing high rates of uplift, with the highest mean Ksn values occurring in the Cocuy region. Mean channel steepness values along strike of the foothills are related to increasing uplift rates from south to north. In contrast, we suggest that high channel steepness values in the south appear to be controlled by high rates of annual precipitation.

  4. NON-CONVENTIONAL PET NUCLIDES: PRODUCTION AND IMAGING

    OpenAIRE

    Laforest, Richard

    2015-01-01

    Abstract Medical cyclotrons are now commonly used for the production of PET nuclides by the (pn) reaction. These devices are typically capable of delivering 10-15 MeV protons beams at sufficiently high intensity for timely production of β+ decaying nuclides. Non-conventional PET nuclides have emerged recently and offers new opportunities for diagnostic and therapy drug discovery. In this paper, we will review the production capabilities for such nuclides at Washington University Medical Schoo...

  5. Estimation of production rates for in-situ cosmogenic isotopes and application to surface exposure dating: certitudes and uncertainties

    International Nuclear Information System (INIS)

    Graham, I.J.

    1996-01-01

    Cosmogenic nuclides, produced in-situ in rocks by the action of cosmic rays on target nuclei, are increasingly being employed by earth scientists in a wide variety of applications. For example, surface exposure dating is used to determine erosion rates, the age of debris flows, alluvial fans, volcanic eruptions, meteoritic impact craters, and glacial deposits, and the timing of recent movement along faults and tectonic uplift. The technique can thus play a vital role in the study of potential hazards from geological processes, by establishing recurrence intervals between them, and establish chronologies and periodicities for major paleoclimatic events. Before surface exposure dating methods using cosmogenic isotopes can be applied even more widely, production rates of the main nuclides of interest must be better known, and their temporal and spatial variabilities determined. This paper summarises the present state of knowledge on production rates of the currently most useful nuclides ( 10 Be, 26 Al, 36 Cl, 14 C, 3 He and 21 Ne), discusses the main areas of concern, and makes suggestions for future improvement. (author). 83 refs., 7 tabs., 11 figs

  6. Cosmogenic nuclide age estimate for Laurentide Ice Sheet recession from the terminal moraine, New Jersey, USA, and constraints on latest Pleistocene ice sheet history

    Science.gov (United States)

    Corbett, Lee B.; Bierman, Paul R.; Stone, Byron D.; Caffee, Marc W.; Larsen, Patrick L.

    2017-01-01

    The time at which the Laurentide Ice Sheet reached its maximum extent and subsequently retreated from its terminal moraine in New Jersey has been constrained by bracketing radiocarbon ages on preglacial and postglacial sediments. Here, we present measurements of in situ produced 10Be and 26Al in 16 quartz-bearing samples collected from bedrock outcrops and glacial erratics just north of the terminal moraine in north-central New Jersey; as such, our ages represent a minimum limit on the timing of ice recession from the moraine. The data set includes field and laboratory replicates, as well as replication of the entire data set five years after initial measurement. We find that recession of the Laurentide Ice Sheet from the terminal moraine in New Jersey began before 25.2±2.1 ka (10Be, n=16, average, 1 standard deviation). This cosmogenic nuclide exposure age is consistent with existing limiting radiocarbon ages in the study area and cosmogenic nuclide exposure ages from the terminal moraine on Martha’s Vineyard ~300 km to the northeast. The age we propose for Laurentide Ice Sheet retreat from the New Jersey terminal position is broadly consistent with regional and global climate records of the last glacial maximum termination and records of fluvial incision.

  7. Cosmogenic production of tritium in dark matter detectors

    Science.gov (United States)

    Amaré, J.; Castel, J.; Cebrián, S.; Coarasa, I.; Cuesta, C.; Dafni, T.; Galán, J.; García, E.; Garza, J. G.; Iguaz, F. J.; Irastorza, I. G.; Luzón, G.; Martínez, M.; Mirallas, H.; Oliván, M. A.; Ortigoza, Y.; Ortiz de Solórzano, A.; Puimedón, J.; Ruiz-Chóliz, E.; Sarsa, M. L.; Villar, J. A.; Villar, P.

    2018-01-01

    The direct detection of dark matter particles requires ultra-low background conditions at energies below a few tens of keV. Radioactive isotopes are produced via cosmogenic activation in detectors and other materials and those isotopes constitute a background source which has to be under control. In particular, tritium is specially relevant due to its decay properties (very low endpoint energy and long half-life) when induced in the detector medium, and because it can be generated in any material as a spallation product. Quantification of cosmogenic production of tritium is not straightforward, neither experimentally nor by calculations. In this work, a method for the calculation of production rates at sea level has been developed and applied to some of the materials typically used as targets in dark matter detectors (germanium, sodium iodide, argon and neon); it is based on a selected description of tritium production cross sections over the entire energy range of cosmic nucleons. Results have been compared to available data in the literature, either based on other calculations or from measurements. The obtained tritium production rates, ranging from a few tens to a few hundreds of nuclei per kg and per day at sea level, point to a significant contribution to the background in dark matter experiments, requiring the application of specific protocols for target material purification, material storing underground and limiting the time the detector is on surface during the building process in order to minimize the exposure to the most dangerous cosmic ray components.

  8. PRODUCTION CONSIDERATIONS FOR THE CLASSICAL PET NUCLIDES.

    Energy Technology Data Exchange (ETDEWEB)

    FINN,R.; SCHLYER,D.

    2001-06-25

    Nuclear Medicine is the specialty of medical imaging, which utilizes a variety of radionuclides incorporated into specific compounds for diagnostic imaging and therapeutic applications. During recent years, research efforts associated with this discipline have concentrated on the decay characteristics of particular radionuclides and the design of unique radiolabeled tracers necessary to achieve time-dependent molecular images. The specialty is expanding with specific Positron emission tomography (PET) and SPECT radiopharmaceuticals allowing for an extension from functional process imaging in tissue to pathologic processes and nuclide directed treatments. PET is an example of a technique that has been shown to yield the physiologic information necessary for clinical oncology diagnoses based upon altered tissue metabolism. Most PET drugs are currently produced using a cyclotron at locations that are in close proximity to the hospital or academic center at which the radiopharmaceutical will be administered. In November 1997, a law was enacted called the Food and Drug Administration Modernization Act of 1997 which directed the Food and Drug Administration (FDA) to establish appropriate procedures for the approval of PET drugs in accordance with section 505 of the Federal Food, Drug, and Cosmetic Act and to establish current good manufacturing practice requirements for such drugs. At this time the FDA is considering adopting special approval procedures and cGMP requirements for PET drugs. The evolution of PET radiopharmaceuticals has introduced a new class of ''drugs'' requiring production facilities and product formulations that must be closely aligned with the scheduled clinical utilization. The production of the radionuclide in the appropriate synthetic form is but one critical component in the manufacture of the finished radiopharmaceutical.

  9. PRODUCTION CONSIDERATIONS FOR THE CLASSICAL PET NUCLIDES

    International Nuclear Information System (INIS)

    FINN, R.; SCHLYER, D.

    2001-01-01

    Nuclear Medicine is the specialty of medical imaging, which utilizes a variety of radionuclides incorporated into specific compounds for diagnostic imaging and therapeutic applications. During recent years, research efforts associated with this discipline have concentrated on the decay characteristics of particular radionuclides and the design of unique radiolabeled tracers necessary to achieve time-dependent molecular images. The specialty is expanding with specific Positron emission tomography (PET) and SPECT radiopharmaceuticals allowing for an extension from functional process imaging in tissue to pathologic processes and nuclide directed treatments. PET is an example of a technique that has been shown to yield the physiologic information necessary for clinical oncology diagnoses based upon altered tissue metabolism. Most PET drugs are currently produced using a cyclotron at locations that are in close proximity to the hospital or academic center at which the radiopharmaceutical will be administered. In November 1997, a law was enacted called the Food and Drug Administration Modernization Act of 1997 which directed the Food and Drug Administration (FDA) to establish appropriate procedures for the approval of PET drugs in accordance with section 505 of the Federal Food, Drug, and Cosmetic Act and to establish current good manufacturing practice requirements for such drugs. At this time the FDA is considering adopting special approval procedures and cGMP requirements for PET drugs. The evolution of PET radiopharmaceuticals has introduced a new class of ''drugs'' requiring production facilities and product formulations that must be closely aligned with the scheduled clinical utilization. The production of the radionuclide in the appropriate synthetic form is but one critical component in the manufacture of the finished radiopharmaceutical

  10. Cosmic-ray-produced stable nuclides: various production rates and their implications

    International Nuclear Information System (INIS)

    Reedy, R.C.

    1981-01-01

    The rates for a number of reactions producing certain stable nuclides, such as 3 He and 4 He, and fission in the moon are calculated for galactic-cosmic-ray particles and for solar protons. Solar-proton-induced reactions with bromine usually are not an important source of cosmogenic Kr isotopes. The 130 Ba(n,p) reaction cannot account for the undercalculation of 130 Xe production rates. Calculated production rates of 15 N, 13 C, and 2 H agree fairly well with rates inferred from measured excesses of these isotopes in samples with long exposure ages. Cosmic-ray-induced fission of U and Th can produce significant amounts of fission tracks and of 86 Kr, 134 Xe, and 136 Xe, especially in samples with long exposures to cosmic-ray particles

  11. Cosmogenic isotope beryllium-7 in the atmosphere: Production versus transport

    Science.gov (United States)

    Pacini, Alessandra; Usoskin, Ilya; Evangelista, Heitor; Echer, Ezequiel; Mursula, Kalevi; Leppanen, Ari-Pekka

    Cosmogenic isotope 7 Be measured near the ground can provide information about its produc-tion (that occurs in the atmosphere due to the interaction of cosmic rays and atmospheric constituents) and its deposition processes (that involves air mass dynamics, stratosphere-troposphere coupling and local climatic conditions). We present the results of an investigation of the atmospheric 7 Be temporal variations at different geographic locations (Finland and Brazil). This study was based on an analysis of three time series of 7 Be concentration measured in near-surface air samples from Rovaniemi and Loviisa (Finland) and Rio de Janeiro (Brazil) for the last decades. We made use of the wavelet spectral method to identify the frequency-temporal features of the 7 Be temporal variations that allowed us to determine the relative importance of production and deposition process for the observed data. By comparing these time series with climatic indices and the values of 7 Be concentration expected from the model for the same period, we found that the climate system is the main driver of the surface isotopic modulation, while the imprints of the production variations are geographically dependent. Thus,7 Be can be considered a good tool to monitor the large-scale air mass dynamics.

  12. Toward detection of supernova event near the earth based on high-resolution analysis of cosmogenic nuclide 10Be in marine sediments

    Science.gov (United States)

    Takiguchi, S.; Suganuma, Y.; Kataoka, R.; Yamaguchi, K. E.

    2017-12-01

    Cosmic rays react with substances in the Earth's atmosphere and form cosmogenic nuclides. The flux would abruptly increase with nearby supernova or terrestrial magnetic events such as reversal or excursion of terrestrial magnetism. The Earth must have been exposed to cosmic ray radiation for as long as 10 Ma, if any, by nearby supernova activities (Kataoka et al., 2014). Increased and prolonged activity of cosmic rays would affect Earth's climate through forming greenhouse gases and biosphere through damaging DNA. Therefore, interests have been growing as to whether and how past supernova events have ever left any fingerprints on them. However, detection of nearby supernova is still under debate (e.g., Knie et al., 2004) To detect long-term record of past supernova activities, we utilize cosmogenic nuclide 10Be because of its short residence time (1-2yr) in the atmosphere, simple transport process, and adequate half-life (1.36 kyr) which is nearly equivalent to the duration of present-day deep water circulation. Sediment samples collected from the equatorial western Pacific (706-825 kyr in age) were finely powdered and decomposed by mixed acids (HNO3, HF, and HClO4). Authigenic phase was also separated from bulk powders by leaching with a weak acid. Because quantitative separation of Be from samples is essential toward high-quality 10Be analysis, both Be-bearing fractions were applied to optimized anion exchange chromatography for Be separation, and Be abundance was measured by atomic absorption spectrometry. The 10Be abundance (10Be/9Be ratios) were measured by accelerator mass spectrometry. The authigenic phase showed temporal curve that is similar to that of bulk samples (Suganuma et al., 2012), reflecting the influence of relative paleo-intensity and utility of authigenic method. Increased data set in terms of sampling interval (density) and total age range would allow us to judge whether it could detect past supernova activities and how it appears when

  13. Unraveling the Quaternary river incision in the Moselle valley (Rhenish Massif, Germany): new insights from cosmogenic nuclide dating (10Be/26Al) of the Main Terrace complex

    Science.gov (United States)

    Rixhon, Gilles; Cordier, Stéphane; Harmand, Dominique; May, Simon Matthias; Kelterbaum, Daniel; Dunai, Tibor; Binnie, Steven; Brückner, Helmut

    2014-05-01

    Throughout the whole river network of the Rhenish Massif, the terrace complex of the so-called Main Terrace forms the morphological transition between a wide upper palaeovalley (plateau valley) and a deeply incised lower valley. The youngest level of this Main Terrace complex (YMT), directly located at the edge of the incised valley, represents a dominant geomorphic feature in the terrace flight; it is often used as a reference level to identify the start of the main middle Pleistocene incision episode (Demoulin & Hallot, 2009). The latter probably reflects the major tectonic pulse that affected the whole Massif and was related to an acceleration of the uplift rates (Demoulin & Hallot, 2009). The Main terraces are particularly well preserved in the lower Moselle valley and are characterized by a constant absolute elevation of their base along a 150 km-long reach. Despite that various hypotheses have been proposed to explain this horizontality (updoming, faulting...), all studies assumed an age of ca. 800 ka for the YMT, mainly based on the questionable extrapolation of palaeomagnetic data obtained in the Rhine valley. Therefore, a reliable chronological framework is still required to unravel the spatio-temporal characteristics of the Pleistocene evolution of the Moselle valley. In this study, we apply cosmogenic nuclide dating (10Be/26Al) to fluvial sediments pertaining to the Main Terrace complex or to the upper Middle Terraces. Several sites along the lower Moselle were sampled following two distinct sampling strategies: (i) depth profiles where the original terrace (palaeo-)surface is well preserved and did not experience much postdepositional burial (e.g., loess cover); and (ii) the isochron technique where the sediment thickness exceeds 3 m. Cosmogenic nuclide ages recently obtained for three rivers in the Meuse catchment in the western Rhenish Massif demonstrated that the Main Terraces were younger than expected and their abandonment was diachronic along the

  14. Production of heavy nuclides in nuclear devices

    Energy Technology Data Exchange (ETDEWEB)

    Eccles, Samuel F [Lawrence Radiation Laboratory, University of California, Livermore, CA (United States)

    1970-05-15

    Since the last Plowshare Symposium in 1964 a number of experiments have been carried out to study the production of heavy nuclei by rapid multiple neutron capture in specially designed nuclear devices. These experiments listed below were conducted underground at the Nevada Test Site and data were obtained radiochemically after sample recovery by drillback. The main characteristics of these experiments are 1) higher neutron fluxes than in the early events, 2) a variety of targets, including 238-U, 242-Pu, 237-Np, 243-Am, 232-Th, 3) the occurrence of an interesting 'reversal of the odd-even effect' in the mass yield curves, and 4) the absence of nuclei in the debris with (Z,A) greater than (100,257). Analysis of data from these experiments have led to capture cross sections for neutron-rich uranium isotopes (out to 249-U), and capture-to-fission ratios for the odd-A neutron-rich plutonium isotopes (out to 253-Pu). General studies of the fission process in neutron-rich nuclei have also been undertaken using the data from these experiments. The large amounts of 250Cm and 257Fm made in the recent Hutch experiment ({approx}1 x 10{sup 20} and {approx}5 x 10{sup 17} atoms, respectively) make it scientifically exciting, and economically feasible, to mine and recover enough material to produce laboratory targets of these isotopes. These targets would be used in investigations of yet-undiscovered, short-lived isotopes of Fm, Md, and No, as well as the possible production of new isotopes of element 104 and even element 105. (author)

  15. Production of heavy nuclides in nuclear devices

    International Nuclear Information System (INIS)

    Eccles, Samuel F.

    1970-01-01

    Since the last Plowshare Symposium in 1964 a number of experiments have been carried out to study the production of heavy nuclei by rapid multiple neutron capture in specially designed nuclear devices. These experiments listed below were conducted underground at the Nevada Test Site and data were obtained radiochemically after sample recovery by drillback. The main characteristics of these experiments are 1) higher neutron fluxes than in the early events, 2) a variety of targets, including 238-U, 242-Pu, 237-Np, 243-Am, 232-Th, 3) the occurrence of an interesting 'reversal of the odd-even effect' in the mass yield curves, and 4) the absence of nuclei in the debris with (Z,A) greater than (100,257). Analysis of data from these experiments have led to capture cross sections for neutron-rich uranium isotopes (out to 249-U), and capture-to-fission ratios for the odd-A neutron-rich plutonium isotopes (out to 253-Pu). General studies of the fission process in neutron-rich nuclei have also been undertaken using the data from these experiments. The large amounts of 250Cm and 257Fm made in the recent Hutch experiment (∼1 x 10 20 and ∼5 x 10 17 atoms, respectively) make it scientifically exciting, and economically feasible, to mine and recover enough material to produce laboratory targets of these isotopes. These targets would be used in investigations of yet-undiscovered, short-lived isotopes of Fm, Md, and No, as well as the possible production of new isotopes of element 104 and even element 105. (author)

  16. Cosmogenic nuclide depth-profiles and geochemical analysis of mountain regolith aimed at quantifying rates of glacial and periglacial erosion

    DEFF Research Database (Denmark)

    Andersen, Jane Lund; Egholm, David Lundbek; Knudsen, Mads Faurschou

    Clay minerals such as kaolinite and gibbsite in mountain regolith in present-day cold environments are often, without further age-constraint, interpreted as products of weathering in a warmer climate (e.g. Rea, 1996; Strømsøe, 2011). This reasoning has, in turn, been used to infer long residence...

  17. Migration studies of fission product nuclides in rocks. Pt.5: Diffusion and permeability of nuclide 125I in marble

    International Nuclear Information System (INIS)

    Wen Ruiyuan; Gao Hongcheng; Wang Xiangyun

    1996-01-01

    The migration behaviour of nuclide 125 I, as a simulation of the long lived fission product 129 I, in marble is studied in self-designed cells. A series of the most important parameters of diffusion and permeability (e.g., intrinsic diffusion coefficient, dispersion coefficient and interstitial flow velocity, etc.) are determined. Based on the differential equation of the nuclide migration, the distribution function and numerical solution of 125 I in marble are presented. The results show that the migration velocity of 125 I in marble is fast, indicating that it is not suitable to dispose nuclear waste in marble

  18. Cosmogenic 10Be production rate calibrated against 3He in the high Tropical Andes (3800-4900 m, 20-22° S)

    Science.gov (United States)

    Blard, P.-H.; Braucher, R.; Lavé, J.; Bourlès, D.

    2013-11-01

    Many geomorphologic applications, notably glacier chronologies, require improvements in both the precision and the accuracy of the cosmogenic dating tool. Of particular importance is the need to better constrain the spatial variability of the cosmogenic nuclides production rates at high elevation and low latitudes. One strategy that can be adopted for this is to couple absolute calibrations, from independently dated surfaces, with cross-calibration studies, performed by measuring several cosmogenic nuclides in the same rock. In the present study, we report the highest-elevation (>4800 m) cross-calibration published to date, comprising measurements of cosmogenic 3He and 10Be in cogenetic pyroxene and quartz. The samples were collected from six dacitic moraine boulders, exposed from 32 to 65 ka at 4820 m on the flanks of the Uturuncu volcano (22° S, 67° W), Southern Lipez (Bolivia). The samples yield a remarkably tight cluster of 3He-10Be production ratios, with a weighted mean of 33.3±0.9 (1σ). This production ratio is undistinguishable, within uncertainties, from the 3He-10Be production ratio of 32.3±0.9 determined in the same mineral pair at low elevation (1333 m) by Amidon et al. (2009). These results agree at the 1σ level and suggest that any hypothetical increase of the 3He-10Be production ratio in pyroxene and quartz is likely to be lower than 5% over this elevation range (1000-5000 m). Moreover, the production ratio is almost insensitive to the Li content of the pyroxene (20 to 50 ppm Li), suggesting that the cosmogenic thermal neutron production of 3He is very low in this setting. The high-elevation 3He-10Be production ratio is used in combination with a local determination of the 3He production rate in the high Central Altiplano (3800 m) (Blard et al., 2013) to establish a local 10Be production rate of 30.0±1.4 at g yr at 3800 m and 20° S. After scaling to sea-level high latitude with the time-dependent Lal/Stone model, this yields a 10Be production

  19. Production of selected cosmogenic radionuclides by muons; 1, Fast muons

    CERN Document Server

    Heisinger, B; Jull, A J T; Kubik, P W; Ivy-Ochs, S; Neumaier, S; Knie, K; Lazarev, V A; Nolte, E

    2002-01-01

    To investigate muon-induced nuclear reactions leading to the production of radionuclides, targets made of C/sub 9/H/sub 12/, SiO /sub 2/, Al/sub 2/O/sub 3/, Al, S, CaCO/sub 3/, Fe, Ni, Cu, Gd, Yb and Tl were irradiated with 100 and 190 GeV muons in the NA54 experimental setup at CERN. The radionuclide concentrations were measured with accelerator mass spectrometry and gamma -spectroscopy. Results are presented for the corresponding partial formation cross- sections. Several of the long-lived and short-lived radionuclides studied are also produced by fast cosmic ray muons in the atmosphere and at depths underground. Because of their importance to Earth sciences investigations, calculations of the depth dependence of production rates by fast cosmic ray muons have been made. (48 refs).

  20. The production of cosmogenic isotopes in the earth's atmosphere and their inventories

    International Nuclear Information System (INIS)

    O'Brien, K.; de la Zerda Lerner, A.; Shea. M.A.; Smart, D.F.

    1991-01-01

    In this paper, production rates of cosmogenic isotopes in the Earth's atmosphere and their dependence on solar modulation and geomagnetic field intensity are calculated. Spallation cross sections were also obtained using the Silberberg-Tsao equations and solar modulation effects were calculated using the force-field model. The current geomagnetic field is treated in detail, and past magnetic fields are modeled based on the archeomagnetic record. Radiocarbon and radioberyllium inventories so obtained are in good agreement with current values. The neutrino-emitting radioactivity of the Earth's atmosphere is shown to add a negligible contribution to the flux from the Sun

  1. Glacial evolution in King George and Livingston Islands (Antarctica) since the Last Glacial Maximum based on cosmogenic nuclide dating and glacier surface reconstruction - CRONOANTAR project

    Science.gov (United States)

    Ruiz Fernández, Jesús; Oliva, Marc; Fernández Menéndez, Susana del Carmen; García Hernández, Cristina; Menéndez Duarte, Rosa Ana; Pellitero Ondicol, Ramón; Pérez Alberti, Augusto; Schimmelpfennig, Irene

    2017-04-01

    CRONOANTAR brings together researchers from Spain, Portugal, France and United Kingdom with the objective of spatially and temporally reconstruct the deglaciation process at the two largest islands in the South Shetlands Archipelago (Maritime Antarctica), since the Global Last Glacial Maximum. Glacier retreat in polar areas has major implications at a local, regional and even planetary scale. Global average sea level rise is the most obvious and socio-economically relevant, but there are others such as the arrival of new fauna to deglaciated areas, plant colonisation or permafrost formation and degradation. This project will study the ice-free areas in Byers and Hurd peninsulas (Livingston Island) and Fildes and Potter peninsulas (King George Island). Ice-cap glacier retreat chronology will be revealed by the use of cosmogenic isotopes (mainly 36Cl) on glacially originated sedimentary and erosive records. Cosmogenic dating will be complemented by other dating methods (C14 and OSL), which will permit the validation of these methods in regions with cold-based glaciers. Given the geomorphological evidences and the obtained ages, a deglaciation calendar will be proposed and we will use a GIS methodology to reconstruct the glacier extent and the ice thickness. The results emerging from this project will allow to assess whether the high glacier retreat rates observed during the last decades were registered in the past, or if they are conversely the consequence (and evidence) of the Global Change in Antarctica. Acknowledgements This work has been funded by the Spanish Ministry of Economy, Industry and Competitiveness (Reference: CTM2016-77878-P).

  2. Origin and transport of sediments in an alpine glaciated catchment (Bossons glacier, France): a quantification combining hydro-sedimentary data, radio-frequency identification of pebbles, cosmogenic nuclides content and probabilistic methods

    International Nuclear Information System (INIS)

    Guillon, Herve

    2016-01-01

    Among the most efficient agents of erosion, glaciers react dynamically to climate change, leading to a significant adjustment of downstream sediment flux. Present-day global warming raises the question regarding the evolution of the sediment load originating from partially glaciated catchment. The detrital export from such environment results from erosion processes operating within distinct geomorphologic domains: supra-glacial rock-walls, ice-covered substratum and the pro-glacial area, downstream from the glacier. The general intent of this doctoral research is therefore to characterize the origin and transport of sediments in the watersheds of two streams draining Bossons glacier (Mont-Blanc massif, France).For this purpose, the components of the sediment flux coming from supra-glacial, sub-glacial and pro-glacial domains are separated and quantified by innovating methods: i. Using the terrestrial cosmogenic nuclides concentrations as evidence of a supra-glacial transport; ii. Combining meteorological data and hydro-sedimentary data acquired at a high time resolution (2 min) and completed by multi-linear models; iii. Estimating sediment flux by source for 7 years and with a probabilistic method; iv. Associating radio-frequency identification of pebbles in the pro-glacial area with a stochastic transport analysis.Through numerical tools, applying the presented methodologies provides erosion rates of the supra-glacial, sub-glacial and pro-glacial domains, and determines the sediment transfer mechanisms within the catchment.Thus in the terminal part of the glacier, 52±14 to 9±4% of the supra-glacial load is transferred to the sub-glacial drainage network. Moreover, its evolution throughout the melt season leads to the export of the winter sediment production during a limited period. Furthermore, the drainage configuration beneath the glacier and its retreat control the remobilization of a long-term sediment stock. These processes explain the contrast between the

  3. Calibration of cosmogenic 3He and 10Be production rates in the High Tropics

    Science.gov (United States)

    Blard, Pierre-Henri; Martin, Léo; Lavé, Jérôme; Charreau, Julien; Condom, Thomas; Lupker, Maarten; Braucher, Régis; Bourlès, Didier

    2014-05-01

    It is critical to refine both the accuracy and the precision of the in situ cosmogenic dating tool, especially for establishing reliable glacial chronologies that can be compared to other paleoclimatic records. Recent cross-calibrations of cosmogenic 3He in pyroxene and 10Be in quartz [1, 2] showed that, both at low (1300 m) and high elevation (4850 m), the 3He/10Be production ratio was probably ~40% higher than the value of ~23 initially defined in the 90's. This recent update is consistent with the last independent determinations of the sea level high latitude production rates of 10Be and 3He, that are about 4 and 125 at.g-1.yr-1, respectively [e.g. 3, 4]. However, major questions remain about these production rates at high elevation, notably because existing calibration sites for both 3He and 10Be are scarce above 2000 m. It is thus crucial to produce new high precision calibration data at high elevation. Here we report cosmogenic 10Be data from boulders sampled on a glacial fan located at 3800 m in the Central Altiplano (Bolivia), whose age is independently constrained by stratigraphic correlations and radiocarbon dating at ca. 16 ka. These data can be used to calibrate the production rate of 10Be at high elevation, in the Tropics. After scaling to sea level and high latitude, these data yield a sea level high latitude P10 ranging from 3.8 to 4.2 at.g-1.yr-1, depending on the used scaling scheme. These new calibration data are in good agreement with recent absolute and cross-calibration of 3He in pyroxenes and 10Be in quartz, from dacitic moraines located at 4850 m in the Southern Altiplano (22° S, Tropical Andes) [2,5]. The so-obtained 3He/10Be production ratio of 33.3±0.9 (1σ) combined with an absolute 3He production rate locally calibrated in the Central Altiplano, at 3800 m, indeed yielded a sea level high latitude P10 ranging from 3.7±0.2 to 4.1±0.2 at.g-1.yr-1, depending on the scaling scheme [2,5]. These values are also consistent with the 10Be

  4. Calculated nuclide production yields in relativistic collisions of fissile nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Benlliure, J.; Schmidt, K.H. [Gesellschaft fuer Schwerionenforschung mbH, Darmstadt (Germany); Grewe, A.; Jong, M. de [Technische Univ. Darmstadt (Germany). Inst. fuer Kernphysik; Zhdanov, S. [AN Kazakhskoj SSR, Alma-Ata (USSR). Inst. Yadernoj Fiziki

    1997-11-01

    A model calculation is presented which predicts the complex nuclide distribution resulting from peripheral relativistic heavy-ion collisions involving fissile nuclei. The model is based on a modern version of the abrasion-ablation model which describes the formation of excited prefragments due to the nuclear collisions and their consecutive decay. The competition between the evaporation of different light particles and fission is computed with an evaporation code which takes dissipative effects and the emission of intermediate-mass fragments into account. The nuclide distribution resulting from fission processes is treated by a semiempirical description which includes the excitation-energy dependent influence of nuclear shell effects and pairing correlations. The calculations of collisions between {sup 238}U and different reaction partners reveal that a huge number of isotopes of all elements up to uranium is produced. The complex nuclide distribution shows the characteristics of fragmentation, mass-asymmetric low-energy fission and mass-symmetric high-energy fission. The yields of the different components for different reaction partners are studied. Consequences for technical applications are discussed. (orig.)

  5. Isotope hydrology of catchment basins: lithogenic and cosmogenic isotopic systems

    Energy Technology Data Exchange (ETDEWEB)

    Nimz, G. J., LLNL

    1998-06-01

    also be treated as a mostly closed system for mass balance considerations. It is the near closure of the system that permits well- constrained chemical mass balance calculations to be made. These calculations generally focus of lithogenic solutes, and therefore in our discussions of lithogenic nuclides in the paper, the concept of chemical mass balance in a nearly dosed system will play an important role. Examination of the isotopic compositions of solutes provides a better understanding of the variety of processes controlling mass balance. It is with this approach that we examined the variety of processes occurring within the catchment system, such as weathering and soil production, generation of stormflow and streamflow (hydrograph separation), movement of soil pore water, groundwater flow, and the overall processes involved with basinal water balance. In this paper, the term `nuclide` will be used when referring to a nuclear species that contains a particular number of protons and neutrons. The term is not specific to any element. The term `isotope` will be used to distinguish nuclear species of a given element (atoms with the same number of protons). That is to say, there are many nuclides in nature - for example, {sup 36}Cl, {sup 87}Sr, {sup 238}U; the element has four naturally-occurring isotopes - {sup 87}Sr, and {sup 88}Sr. This paper will first discuss the general principles that underlie the study of lithogenic and cosmogenic nuclides in hydrology, and provide references to some of the more important studies applying these principles and nuclides. We then turn in the second section to a discussion of their specific applications in catchment- scale systems. The final section of this paper discusses new directions in the application of lithogenic and cosmogenic nuclides to catchment hydrology, with some thoughts concerning possible applications that still remain unexplored.

  6. Investigation on natural radioactive nuclide contents of rock products in Xi'an construction materials market

    International Nuclear Information System (INIS)

    Zhou Chunlin; Han Feng; Shang Aiguo; Li Tiantuo; Guo Huiping; Yie Lichao; Li Guifang

    2001-01-01

    The author reports the investigation results on natural radioactive nuclide contents of rock products from Xi'an construction materials market. The products were classified according to the national standard. The results show that natural radioactive nuclide contents in sampled rock products are in normal radioactive background levels. The radio-activity ranges of 238 U, 226 Ra, 232 Th and 40 K are 2.7 - 181.8, 0.92 - 271.0, 0.63 - 148.0, 1.8 - 1245 Bq·kg -1 , respectively. According to the national standard (JC 518-93), the application of some rock products must be limited

  7. Some nuclear chemical aspects of medical generator nuclide production at the Los Alamos hot cell facility

    CERN Document Server

    Fassbender, M; Heaton, R C; Jamriska, D J; Kitten, J J; Nortier, F M; Peterson, E J; Phillips, D R; Pitt, L R; Salazar, L L; Valdez, F O; 10.1524/ract.92.4.237.35596

    2004-01-01

    Generator nuclides constitute a convenient tool for applications in nuclear medicine. In this paper, some radiochemical aspects of generator nuclide parents regularly processed at Los Alamos are introduced. The bulk production of the parent nuclides /sup 68/Ge, /sup 82/Sr, /sup 109/Cd and /sup 88/Zr using charged particle beams is discussed. Production nuclear reactions for these radioisotopes, and chemical separation procedures are presented. Experimental processing yields correspond to 80%-98% of the theoretical thick target yield. Reaction cross sections are modeled using the code ALICE-IPPE; it is observed that the model largely disagrees with experimental values for the nuclear processes treated. Radionuclide production batches are prepared 1-6 times yearly for sales. Batch activities range from 40MBq to 75 GBq.

  8. Some nuclear chemical aspects of medical generator nuclide production at the Los Alamos hot cell facility

    International Nuclear Information System (INIS)

    Fassbender, M.; Nortier, F.M.; Phillips, D.R.; Hamilton, V.T.; Heaton, R.C.; Jamriska, D.J.; Kitten, J.J.; Pitt, L.R.; Salazar, L.L.; Valdez, F.O.; Peterson, E.J.

    2004-01-01

    Generator nuclides constitute a convenient tool for applications in nuclear medicine. In this paper, some radiochemical aspects of generator nuclide parents regularly processed at Los Alamos are introduced. The bulk production of the parent nuclides 68 Ge, 82 Sr, 109 Cd and 88 Zr using charged particle beams is discussed. Production nuclear reactions for these radioisotopes, and chemical separation procedures are presented. Experimental processing yields correspond to 80%-98% of the theoretical thick target yield. Reaction cross sections are modeled using the code ALICE-IPPE; it is observed that the model largely disagrees with experimental values for the nuclear processes treated. Radionuclide production batches are prepared 1-6 times yearly for sales. Batch activities range from 40 MBq to 75 GBq. (orig.)

  9. Measurements of 14C in ancient ice from Taylor Glacier, Antarctica constrain in situ cosmogenic 14CH4 and 14CO production rates

    Science.gov (United States)

    Petrenko, Vasilii V.; Severinghaus, Jeffrey P.; Schaefer, Hinrich; Smith, Andrew M.; Kuhl, Tanner; Baggenstos, Daniel; Hua, Quan; Brook, Edward J.; Rose, Paul; Kulin, Robb; Bauska, Thomas; Harth, Christina; Buizert, Christo; Orsi, Anais; Emanuele, Guy; Lee, James E.; Brailsford, Gordon; Keeling, Ralph; Weiss, Ray F.

    2016-03-01

    Carbon-14 (14C) is incorporated into glacial ice by trapping of atmospheric gases as well as direct near-surface in situ cosmogenic production. 14C of trapped methane (14CH4) is a powerful tracer for past CH4 emissions from ;old; carbon sources such as permafrost and marine CH4 clathrates. 14C in trapped carbon dioxide (14CO2) can be used for absolute dating of ice cores. In situ produced cosmogenic 14C in carbon monoxide (14CO) can potentially be used to reconstruct the past cosmic ray flux and past solar activity. Unfortunately, the trapped atmospheric and in situ cosmogenic components of 14C in glacial ice are difficult to disentangle and a thorough understanding of the in situ cosmogenic component is needed in order to extract useful information from ice core 14C. We analyzed very large (≈1000 kg) ice samples in the 2.26-19.53 m depth range from the ablation zone of Taylor Glacier, Antarctica, to study in situ cosmogenic production of 14CH4 and 14CO. All sampled ice is >50 ka in age, allowing for the assumption that most of the measured 14C originates from recent in situ cosmogenic production as ancient ice is brought to the surface via ablation. Our results place the first constraints on cosmogenic 14CH4 production rates and improve on prior estimates of 14CO production rates in ice. We find a constant 14CH4/14CO production ratio (0.0076 ± 0.0003) for samples deeper than 3 m, which allows the use of 14CO for correcting the 14CH4 signals for the in situ cosmogenic component. Our results also provide the first unambiguous confirmation of 14C production by fast muons in a natural setting (ice or rock) and suggest that the 14C production rates in ice commonly used in the literature may be too high.

  10. Phase II Nuclide Partition Laboratory Study Influence of Cellulose Degradation Products on the Transport of Nuclides from SRS Shallow Land Burial Facilities; FINAL

    International Nuclear Information System (INIS)

    Serkiz, S.M.

    1999-01-01

    Degradation products of cellulosic materials (e.g., paper and wood products) can significantly influence the subsurface transport of metals and radionuclides. Codisposal of radionuclides with cellulosic materials in the E-Area slit trenches at the Savannah River Site (SRS) is, therefore, expected to influence nuclide fate and transport in the subsurface. Due to the complexities of these systems and the scarcity of site-specific data, the effects of cellulose waste loading and its subsequent influence on nuclide transport are not well established

  11. Accelerator based production of fissile nuclides, threshold uranium price and perspectives

    International Nuclear Information System (INIS)

    Djordjevic, D.; Knapp, V.

    1988-01-01

    Accelerator breeder system characteristics are considered in this work. One such system which produces fissile nuclides can supply several thermal reactors with fissile fuel, so this system becomes analogous to an uranium enrichment facility with difference that fissile nuclides are produced by conversion of U-238 rather than by separation from natural uranium. This concept, with other long-term perspective for fission technology on the basis of development only one simpler technology. The influence of basic system characteristics on threshold uranium price is examined. Conditions for economically acceptable production are established. (author)

  12. Production and Separation of T = 1/2 Nuclides for {beta}--{nu} angular correlation measurements

    Energy Technology Data Exchange (ETDEWEB)

    Delahaye, P.; Bajeat, O.; Saint Laurent, M. G.; Thomas, J. C.; Traykov, E. [GANIL, CEA/DSM-CNRS/IN2P3, Bd. Becquerel, BP 55027, 14076 CAEN Cedex 05 (France); Couratin, C. [GANIL, CEA/DSM-CNRS/IN2P3, Bd. Becquerel, BP 55027, 14076 CAEN Cedex 05 (France); LPC Caen, 6 bd Marechal Juin, 14050 CAEN Cedex (France); Lienard, E.; Ban, G.; Durand, D.; Flechard, X. [LPC Caen, 6 bd Marechal Juin, 14050 CAEN Cedex (France); Naviliat-Cuncic, O. [NSCL, Michigan State University, 1 Cyclotron, East Lansing, Michigan 48824-1321 (United States); Stora, T. [ISOLDE, CERN, 1211 Geneva 23 (Switzerland); Collaboration: GANISOL Group

    2011-11-30

    The SPIRAL facility at GANIL, which uses the so-called ISOL method to produce radioactive ion beams, is being upgraded to extend its production capabilities to the metallic beams of neutron deficient isotopes. We discuss here the potentialities offered by this upgrade for the measurement of the {beta}--{nu} angular correlation in the {beta}--decay of mirror nuclides.

  13. Production of radioactive nuclides in inverse reaction kinematics

    International Nuclear Information System (INIS)

    Traykov, E.; Rogachevskiy, A.; Bosswell, M.; Dammalapati, U.; Dendooven, P.; Dermois, O.C.; Jungmann, K.; Onderwater, C.J.G.; Sohani, M.; Willmann, L.; Wilschut, H.W.; Young, A.R.

    2007-01-01

    Efficient production of short-lived radioactive isotopes in inverse reaction kinematics is an important technique for various applications. It is particularly relevant when the isotope of interest is only a few nucleons away from a stable isotope. In this article production via charge exchange and stripping reactions in combination with a magnetic separator is explored. The relation between the separator transmission efficiency, the production yield, and the choice of beam energy is discussed. The results of some exploratory experiments will be presented

  14. Production rates of 36Cl in basalts from the calibration site of Fuerteventura, Canary Islands

    NARCIS (Netherlands)

    Mai, K.

    2009-01-01

    Age determination based on cosmogenic nuclides is an important tool to investigate landscape development and age relations of geologically very young materials. The aim of this study is to contribute data to establish age determination of the basis of cosmogenic 36Cl production as a generally

  15. An innovative method for determining the diffusion coefficient of product nuclide

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Chih Lung [Dept. of Nuclear Back-end Management, Taiwan Power Company, Taipei (China); Wang, Tsing Hai [Dept. Biomedical Engineering and Environment Sciences, National Tsing Hua University, Hsinchu (China)

    2017-08-15

    Diffusion is a crucial mechanism that regulates the migration of radioactive nuclides. In this study, an innovative numerical method was developed to simultaneously calculate the diffusion coefficient of both parent and, afterward, series daughter nuclides in a sequentially reactive through-diffusion model. Two constructed scenarios, a serial reaction (RN{sub 1} → RN{sub 2} → RN{sub 3}) and a parallel reaction (RN{sub 1} → RN{sub 2}A + RN{sub 2}B), were proposed and calculated for verification. First, the accuracy of the proposed three-member reaction equations was validated using several default numerical experiments. Second, by applying the validated numerical experimental concentration variation data, the as-determined diffusion coefficient of the product nuclide was observed to be identical to the default data. The results demonstrate the validity of the proposed method. The significance of the proposed numerical method will be particularly powerful in determining the diffusion coefficients of systems with extremely thin specimens, long periods of diffusion time, and parent nuclides with fast decay constants.

  16. Production of gallium-66, positron emitting nuclide for radioimmumotherapy

    International Nuclear Information System (INIS)

    Mirzadeh, S.; Chu, Yung Yee

    1991-01-01

    Excitation functions for production of 66 Ga via α-induced nuclear reactions on enriched 66 Zn have been measured with E α ≤27.3 MeV and E α ≤43.7 MeV employing the stack-thin target technique. In addition, the induced activity of 67 Ga in the same sets of targets allowed an evaluation of the excitation functions of the corresponding nuclear reactions. 17 refs., 2 figs., 2 tabs

  17. Atmospheric radiocarbon calibration to 45,000 yr B.P.: late glacial fluctuations and cosmogenic isotope production

    Science.gov (United States)

    Kitagawa; van der Plicht J

    1998-02-20

    More than 250 carbon-14 accelerator mass spectrometry dates of terrestrial macrofossils from annually laminated sediments from Lake Suigetsu (Japan) provide a first atmospheric calibration for almost the total range of the radiocarbon method (45,000 years before the present). The results confirm the (recently revised) floating German pine chronology and are consistent with data from European and marine varved sediments, and combined uranium-thorium and carbon-14 dating of corals up to the Last Glacial Maximum. The data during the Glacial show large fluctuations in the atmospheric carbon-14 content, related to changes in global environment and in cosmogenic isotope production.

  18. Production, study and use of short-lived nuclides in pure and applied nuclear research

    International Nuclear Information System (INIS)

    Bjoernstad, T.

    1986-01-01

    The thesis which is based on 17 published papers, reports on the on-line performance of the fast radiochemical separation system SISAK, technical devlopment in the preparation of sources for beta-particles and neutrons, and on important SISAK system improvements concerning liquid hold-up time. It further reports on the development of new production targets at ISOLDE for 600 MeV proton and 910 MeV 3 He-particle irradiations, on tests with a heavy ion beam of 1 GeV 12 C-particles, and on the present availability of mass-separated beams of the halogen elements through new ion source development. Some results from nuclear spectroscopic studies of nuclides in selected mass regions when using such new or improved techniques are given. Examples of techniques for practical application of short-lived nuclides in radiochemical analysis and for radiochemical production for medical purposes are presented

  19. The production of residual nuclides in Pb irradiated by 400 MeV/u carbon ions

    Energy Technology Data Exchange (ETDEWEB)

    Ge, H.L. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Ma, F., E-mail: mf@impcas.ac.cn [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Zhang, X.Y.; Ju, Y.Q.; Zhang, H.B.; Chen, L.; Luo, P. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Zhou, B. [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Zhang, Y.B.; Li, J.Y.; Xu, J.K. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Liang, T.J. [Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Wang, S.L. [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Yang, Y.W.; Yang, L. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

    2014-10-15

    The experiment was performed by irradiating a Pb foil with 400 MeV/u carbon beam at the HIRFL-CSR in Lanzhou, China. The experimental data was acquired by the off-line γ-spectroscopy method. 32 radioactive residual nuclides had been observed and their cross sections were determined. The measured results were compared with the results simulated by Monte Carlo code MCNPX2.7.0. The comparison shows that the simulated cross sections were underestimated for the fragments from A = 20 to 41 and A = 110 to 175. By fitting the measured and simulated cross sections to Rudstams semi-empirical formula, it was found that the charge distribution of products was asymmetric for the residual nuclides with a high mass number.

  20. Inter-comparison of cosmogenic in-situ 3He, 21Ne and 36Cl at low latitude along an altitude transect on the SE slope of the Kilimanjaro volcano (3°S, Tanzania)

    Science.gov (United States)

    Schimmelpfennig, I.; Williams, A.; Pik, R.; Burnard, P.; Niedermann, S.; Finkel, R. C.; Benedetti, L.; Schneider, B.

    2010-12-01

    Because the intensity and energy spectrum of the cosmic ray flux is affected by atmospheric depth and geomagnetic-field strength, cosmogenic nuclide production rates increase considerably with altitude and to a lesser degree with latitude. The scaling methods used to account for spatial variability in production rates assume that all cosmogenic nuclides have the same altitude dependence. In this study we evaluate whether the production rates of cosmogenic 36Cl, 3He and 21Ne change differently with altitude, which is plausible due to the different energy-thresholds of their production reactions. If so, nuclide-specific scaling factors would be required. Concentrations of the three cosmogenic nuclides were determined in mafic phenocrysts over an altitude transect between 1000 and 4300 m at Kilimanjaro volcano (3° S). Altitude-dependence of relative production rates was assessed in two ways: by determination of concentration ratios and by calculation of apparent exposure age ratios for all nuclide pairs. The latter accounts for characteristics of 36Cl that the stable nuclides 3He and 21Ne do not possess (radioactive decay, high sensitivity to mineral composition and significant contributions from production reactions other than spallation). All ratios overlap within error over the entire transect, and altitudinal variation in relative production rates is not therefore evident. This suggests that nuclide-specific scaling factors are not required for the studied nuclides at this low latitude location. However, because previous studies [1,2] documented anomalous altitude-dependent variations of 3He production at mid-latitude sites, the effect of latitude on cross-calibrations should be further evaluated. We determined cosmogenic 21Ne/3He concentration ratios of 0.187 ± 0.010 in pyroxenes and 0.375 ± 0.015 in olivines, agreeing with those reported in previous studies. Despite the absence of independently determined ages for the studied lava surfaces, the consistency in

  1. Neutron cross sections of 28 fission product nuclides adopted in JENDL-1

    International Nuclear Information System (INIS)

    Kikuchi, Yasuyuki; Nakagawa, Tsuneo; Igarasi, Sin-iti; Matsunobu, Hiroyuki; Kawai, Masayoshi; Iijima, Shungo.

    1981-02-01

    This is the final report concerning the evaluated neutron cross sections of 28 fission product nuclides adopted in the first version of Japanese Evaluated Nuclear Data Library (JENDL-1). These 28 nuclides were selected as being most important for fast reactor calculations, and are 90 Sr, 93 Zr, 95 Mo, 97 Mo, 99 Tc, 101 Ru, 102 Ru, 103 Rh, 104 Ru, 105 Pd, 106 Ru, 107 Pd, 109 Ag, 129 I, 131 Xe, 133 Cs, 135 Cs, 137 Cs, 143 Nd, 144 Ce, 144 Nd, 145 Nd, 147 Pm, 147 Sm, 149 Sm, 151 Sm, 153 Eu and 155 Eu. The status of the experimental data was reviewed over the whole energy range. The present evaluation was performed on the basis of the measured data with the aid of theoretical calculations. The optical and statical models were used for evaluation of the smooth cross sections. An improved method was developed in treating the multilevel Breit-Wigner formula for the resonance region. Various physical parameters and the level schemes, adopted in the present work are discussed by comparing with those used in the other evaluations such as ENDF/B-IV, CEA, CNEN-2 and RCN-2. Furthermore, the evaluation method and results are described in detail for each nuclide. The evaluated total, capture and inelastic scattering cross sections are compared with the other evaluated data and some recent measured data. Some problems of the present work are pointed out and ways of their improvement are suggested. (author)

  2. ENDF/B-IV fission-product files: summary of major nuclide data

    International Nuclear Information System (INIS)

    England, T.R.; Schenter, R.E.

    1975-09-01

    The major fission-product parameters [sigma/sub th/, RI, tau/sub 1/2/, E-bar/sub β/, E-bar/sub γ/, E-bar/sub α/, decay and (n,γ) branching, Q, and AWR] abstracted from ENDF/B-IV files for 824 nuclides are summarized. These data are most often requested by users concerned with reactor design, reactor safety, dose, and other sundry studies. The few known file errors are corrected to date. Tabular data are listed by increasing mass number

  3. Complex nuclear-structure phenomena revealed from the nuclide production in fragmentation reactions

    International Nuclear Information System (INIS)

    Ricciardi, M.V.; Kelic, A.; Napolitani, P.; Schmidt, K.H.; Yordanov, O.; Ignatyuk, A.V.; Rejmund, F.

    2003-12-01

    Complex structural effects in the nuclide production from the projectile fragmentation of 1 A GeV 238 U nuclei in a titanium target are reported. The structure seems to be insensitive to the excitation energy induced in the reaction. This is in contrast to the prominent structural features found in nuclear fission and in transfer reactions, which gradually disappear with increasing excitation energy. Using the statistical model of nuclear reactions, relations to structural effects in nuclear binding and in the nuclear level density are demonstrated. (orig.)

  4. Radioactive nuclide production and isomeric state branching ratios in P + W reactions to 200 mev

    International Nuclear Information System (INIS)

    Young, P.G.; Chadwick, M.B.

    1995-01-01

    Calculations of nuclide yields from spallation reactions usually assume that the products are formed in their ground states. We are performing calculations of product yields from proton reactions on tungsten isotopes that explicitly account for formation of the residual nuclei in excited states. The Hauser-Feshbach statistical/preequilibrium code GNASH, with full accounting for angular momentum conservation and electromagnetic transitions, is utilized in the calculations. We present preliminary results for isomer branching ratios for proton reactions to 200 MeV for several products including the 31-y, 16+ state in l78 Hf and the 25-d, 25/2- state in 179 Hf. Knowledge of such branching ratios, might be important for concepts such as accelerator production of tritium that utilize intermediate-energy proton reactions on tungsten

  5. Uncertainties in the production of p nuclides in thermonuclear supernovae determined by Monte Carlo variations

    Science.gov (United States)

    Nishimura, N.; Rauscher, T.; Hirschi, R.; Murphy, A. St J.; Cescutti, G.; Travaglio, C.

    2018-03-01

    Thermonuclear supernovae originating from the explosion of a white dwarf accreting mass from a companion star have been suggested as a site for the production of p nuclides. Such nuclei are produced during the explosion, in layers enriched with seed nuclei coming from prior strong s processing. These seeds are transformed into proton-richer isotopes mainly by photodisintegration reactions. Several thousand trajectories from a 2D explosion model were used in a Monte Carlo approach. Temperature-dependent uncertainties were assigned individually to thousands of rates varied simultaneously in post-processing in an extended nuclear reaction network. The uncertainties in the final nuclear abundances originating from uncertainties in the astrophysical reaction rates were determined. In addition to the 35 classical p nuclides, abundance uncertainties were also determined for the radioactive nuclides 92Nb, 97, 98Tc, 146Sm, and for the abundance ratios Y(92Mo)/Y(94Mo), Y(92Nb)/Y(92Mo), Y(97Tc)/Y(98Ru), Y(98Tc)/Y(98Ru), and Y(146Sm)/Y(144Sm), important for Galactic Chemical Evolution studies. Uncertainties found were generally lower than a factor of 2, although most nucleosynthesis flows mainly involve predicted rates with larger uncertainties. The main contribution to the total uncertainties comes from a group of trajectories with high peak density originating from the interior of the exploding white dwarf. The distinction between low-density and high-density trajectories allows more general conclusions to be drawn, also applicable to other simulations of white dwarf explosions.

  6. Lithogenic and cosmogenic tracers in catchment hydrology

    Energy Technology Data Exchange (ETDEWEB)

    Nimz, G.J.

    1995-01-01

    A variety of physical processes affect solute concentrations within catchment waters. The isotopic compositions of the solutes can indicate which processes have determined the observed concentrations. These processes together constitute the physical history of the water, which is one of the primary concerns in hydrology. Many groundwater solutes are derived as a result of interaction between the water and the rock and/or soil within the system. These are termed {open_quotes}lithogenic{close_quotes} solutes. The isotopic compositions of these solutes provide information regarding rock-water interactions. Many other solutes have their isotopic compositions determined both internally and externally to the catchment system. Important members of this group include solutes that have isotopic compositions produced by atomic particle interactions with other nuclides. The source of the atomic particles can be cosmic radiation (producing {open_quotes}cosmogenic{close_quotes} nuclides in the atmosphere and land surface), anthropogenic nuclear reactions (producing {open_quotes}thermonuclear{close_quotes} nuclides), or radioactive and fission decay of naturally-occurring elements, such as U and Th (producing {open_quotes}in-situ{close_quotes} lithogenic nuclides in the deep subsurface). Current language usage often combines all of the atomic particle-produced nuclides under the heading {open_quotes}cosmogenic nuclides{close_quotes}, and for simplicity we will often follow that usage, although always clearly indicating which variety is being discussed. This paper addresses the processes that affect the lithogenic and cosmogenic solute compositions in groundwater, and how these compositions can therefore be used in integrative ways to understand the physical history of groundwater within a catchment system.

  7. Cosmogenic activation of materials

    Science.gov (United States)

    Cebrián, Susana

    2017-10-01

    Experiments looking for rare events like the direct detection of dark matter particles, neutrino interactions or the nuclear double beta decay are operated deep underground to suppress the effect of cosmic rays. But, the production of radioactive isotopes in materials due to previous exposure to cosmic rays is a hazard when ultra-low background conditions are required. In this context, the generation of long-lived products by cosmic nucleons has been studied for many detector media and for other materials commonly used. Here, the main results obtained on the quantification of activation yields on the Earth’s surface will be summarized, considering both measurements and calculations following different approaches. The isotope production cross-sections and the cosmic ray spectrum are the two main ingredients when calculating this cosmogenic activation; the different alternatives for implementing them will be discussed. Activation that can take place deep underground mainly due to cosmic muons will be briefly commented too. Presently, the experimental results for the cosmogenic production of radioisotopes are scarce and discrepancies between different calculations are important in many cases, but the increasing interest on this background source which is becoming more and more relevant can help to change this situation.

  8. Accelerator based production of fissile nuclides, threshold uranium price and perspectives; Akceleratorska proizvodnja fisibilnih nuklida, granicna cijena urana i perspektive

    Energy Technology Data Exchange (ETDEWEB)

    Djordjevic, D [INIS-Inzenjering, Sarajevo (Yugoslavia); Knapp, V [Elektrotehnicki fakultet, zagreb (Yugoslavia)

    1988-07-01

    Accelerator breeder system characteristics are considered in this work. One such system which produces fissile nuclides can supply several thermal reactors with fissile fuel, so this system becomes analogous to an uranium enrichment facility with difference that fissile nuclides are produced by conversion of U-238 rather than by separation from natural uranium. This concept, with other long-term perspective for fission technology on the basis of development only one simpler technology. The influence of basic system characteristics on threshold uranium price is examined. Conditions for economically acceptable production are established. (author)

  9. Production of residual nuclides by proton-induced reactions on target W at the energy of 72 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Miah, Moazzem Hossain [Univ. of Chittagong, Dept. of Physics, Chittagong (Bangladesh); Kuhnhenn, Jochen; Herpers, Ulrich [Univ. of Cologne, Dept. of Nuclear Chemistry, Cologne (Germany); Michel, Rolf [University of Hannover, Centre for Radiation Protection and Radioecology (Germany); Kubik, Peter [Paul Scherrer Inst., c/o Institute for Particle Physics, ETH Hoenggerberg, Zuerich (Switzerland)

    2002-08-01

    Investigations of cross-sections for residual nuclide production on the target element W by proton-induced reactions were performed by irradiating the target with 72 MeV protons using the cyclotron facilities at Paul-Scherrer Institute, Zurich, Switzerland. Residual nuclides were measured by gamma-spectrometry of HpGe detectors calibrated with standard gamma sources. The measured data contains 104 individual cross-sections for 20 identified nuclides in the proton energies between 52.5 - 68.9 MeV. These nuclear data is important in the study of spallation neutron source and in accelerator driven technologies such as waste transmutation and energy amplification. The present data are compared with the shape of the excitation functions of earlier only one measurement at higher energies and they are in good agreement to each other. (author)

  10. Cosmogenic radionuclides in the environment: 32Si in precipitation samples from the Jungfraujoch, production cross sections of 36Cl in Argon and modeling of the atmospheric 36Cl production

    International Nuclear Information System (INIS)

    Parrat, Y.

    1997-06-01

    The concentrations of the cosmogenic radionuclide 32 Si were measured in four fresh snow samples from the Jungfraujoch in the Swiss Alps (3450 m asl.) to study the feasibility of measuring this potential dating nuclide with Accelerator Mass Spectrometry. This technique could reduce drastically the amount of material needed for measurements of 32 Si concentrations in environmental samples in contrast to conventional radiometric detection. The measured 32 Si concentrations in the snow samples were between 1.84 and 6.28 μBql -1 . These values agree with other measurements of precipitation samples. The measured 32 Si/Si tot ratios ranged from 2.5.10 -17 to 2.3.10 -15 and were thus below the present detection limit of about 10 -14 , showing that at present it is not possible to carry out AMS measurements of 32 Si in precipitation samples. For the first time, experimental cross sections of the reaction 40 Ar(p,X) 36 Cl have been determined for the proton energy range 16-590 MeV. These cross sections were measured using a gas target, a novel method which was tested successfully by irradiating nitrogen targets to confirm literature values of the N(p,X) 7 Be and N(p,X) 10 Be cross sections. In fact, good agreement was found between the obtained cross sections with those using solid targets. Production of several radionuclides in the reaction of proton with nickel were also measured. Comparison of these cross sections with literature data proved that the proton flux measurements carried out with ionization chambers were very accurate. The excitation function of the reaction 40 Ar(p,X) 36 Cl exhibits two maxima at proton energies of 20 MeV for the (p,αn)reaction and 95 MeV for the (p,2p3n) reaction, with maximum cross sections of 105 mb and 53 mb, respectively. (author) figs., tabs., refs

  11. From the HINDAS Project: Excitation Functions for Residual Nuclide Production by Proton-Induced Reactions

    International Nuclear Information System (INIS)

    Michel, R.; Gloris, M.; Protoschill, J.; Uosif, M.A.M.; Weug, M.; Herpers, U.; Kuhnhenn, J.; Kubik, P.-W.; Schumann, D.; Synal, H.-A.; Weinreich, R.; Leya, I.; David, J.C.; Leray, S.; Duijvestijn, M.; Koning, A.; Kelic, A.; Schmidt, K.H.; Cugnon, J.

    2005-01-01

    A survey is given about efforts undertaken during the HINDAS project to investigate the energy dependence of residual nuclide production by proton-induced reactions from thresholds up to 2.6 GeV. For proton-induced reactions, our experiments aimed to further develop and complete the cross-section database that was established by our collaboration in recent years. It was extended to the heavy-target elements Ta, W, Pb, and Bi for energies up to 2.6 GeV. In addition, new measurements for the target element iron were performed up to 2.6 GeV and for natural uranium for energies from 21 MeV to 69 MeV. For the target element lead, a comprehensive set of excitation functions published recently was completed by AMS-measurements of cross sections for the production of the long-lived radionuclides Be-10, Al-26, Cl-36, and I-129 and by mass spectrometric measurements for stable and radioactive rare gas isotopes of He, Ne, Ar, Kr, and Xe. Comprehensive tests of the nuclear-reaction codes TALYS and INCL4+ABLA, which were developed within the HINDAS project, were performed with the new experimental results over the entire energy range

  12. Cosmogenic Radionuclides in the Atmosphere: Origin and Applications

    International Nuclear Information System (INIS)

    Abdel Monem, A.A.

    2013-01-01

    conditions can be used to date groundwater and study circulation of water in the ocean. The cosmogenic noble gases nuclides 37 Ar, 39 Ar, 81 Kr and 85 Kr have long residence time in the atmosphere. The other cosmogenic ones, 10 Be, 26 AI and 32 Si, rapidly removed from the atmosphere by precipitation are deposited in marine or lacustrine sediments and in the polar ice sheets, where they are used to measure the rate of deposition of marine sediments. The group 10 Be, 26 AI and 36 CI are suitable for glaciological studies together with 14 C, 31 CI and 81 Kr which occur in air bubbles trapped in glacial ice. Also, the cosmogenic 10 Be, 26 AI and 36 CI accumulate in rocks exposed to cosmic rays at the surface of the Earth, which makes them useful to measure erosion rates and exposure ages. The existence of 10 Be in young volcanic rocks in island arcs and subduction zones has been attributed to the melting of deep sea sediments in the down going slab of oceanic crust. Similarly, the presence of 10 Be in tektites from Indochina and Australia can be attributed to melting of continental sediments containing 10 Be produced in the atmosphere. The use of these radionuclides for the study of geologic phenomena has been enhanced by ultra-sensitive mass spectrometers. This equipment may enable to detect time-dependent variations in the production rates of certain radionuclides that could be attributed to past fluctuations of the solar activity or of the geomagnetic field.

  13. Comparative uptake of gamma-emitting fission product nuclides by plants

    International Nuclear Information System (INIS)

    D'souza, T.J.; Mistry, K.B.

    1974-01-01

    The comparative uptake of long-lived gamma-emitting fission product nuclides 106 Ru, 125 Sb, 137 Cs and 144 Ce, present in global fallout from nuclear explosions, by maize (Zea mays L) plants was examined in water culture experiments. Over identical duration of plant growth, the extent of accumulation of the radionuclides in aerial tissues was in the following decreasing order: 137 Cs >, 125 Sb >, 106 Ru > and 144 Ce. In roots, however, the retention of 144 Ce and 106 Ru was greater than that of 137 Cs and 125 Sb. Complementary studies with maize and rice (Oryza sativa L) grown on two contrasting soil types, namely, laterite and black clay loam indicated that 137 Cs uptake by plants was markedly greater than that of the other radionuclides in both soil types. Plant uptake of 106 Ru and 125 Sb was significantly higher than that of 144 Ce in the black soil. In the laterite, however, 144 Ce uptake far exceeded that of 106 Ru and 125 Sb. In general, maize removed higher amounts of the radionuclides than rice from both soil types. (author)

  14. Lithogenic and cosmogenic tracers in catchment hydrology

    International Nuclear Information System (INIS)

    Nimz, G.J.

    1995-01-01

    A variety of physical processes affect solute concentrations within catchment waters. The isotopic compositions of the solutes can indicate which processes have determined the observed concentrations. These processes together constitute the physical history of the water, which is one of the primary concerns in hydrology. Many groundwater solutes are derived as a result of interaction between the water and the rock and/or soil within the system. These are termed open-quotes lithogenicclose quotes solutes. The isotopic compositions of these solutes provide information regarding rock-water interactions. Many other solutes have their isotopic compositions determined both internally and externally to the catchment system. Important members of this group include solutes that have isotopic compositions produced by atomic particle interactions with other nuclides. The source of the atomic particles can be cosmic radiation (producing open-quotes cosmogenicclose quotes nuclides in the atmosphere and land surface), anthropogenic nuclear reactions (producing open-quotes thermonuclearclose quotes nuclides), or radioactive and fission decay of naturally-occurring elements, such as U and Th (producing open-quotes in-situclose quotes lithogenic nuclides in the deep subsurface). Current language usage often combines all of the atomic particle-produced nuclides under the heading open-quotes cosmogenic nuclidesclose quotes, and for simplicity we will often follow that usage, although always clearly indicating which variety is being discussed. This paper addresses the processes that affect the lithogenic and cosmogenic solute compositions in groundwater, and how these compositions can therefore be used in integrative ways to understand the physical history of groundwater within a catchment system

  15. Nuclides Economy

    International Nuclear Information System (INIS)

    Ivanov, Evgeny; Subbotin, Stanislav

    2007-01-01

    Traditionally the subject of discussion about the nuclear technology development is focused on the conditions that facilitate the nuclear power deployment. The main objective of this work is seeking of methodological basis for analysis of the coupling consequences of nuclear development. Nuclide economy is the term, which defines a new kind of society relations, dependent on nuclear technology development. It is rather closed to the setting of problems then to the solving of them. Last year Dr. Jonathan Tennenbaum published in Executive Intelligence Review Vol. 33 no 40 the article entitled as 'The Isotope Economy' where main interconnections for nuclear energy technologies and their infrastructure had been explained on the popular level. There he has given several answers and, therefore, just here we will try to expand this concept. We were interested by this publication because of similarity of our vision of resource base of technologies development. The main paradigm of 'Isotope economy' was expresses by Lyndon H. LaRouche: 'Instead of viewing the relevant resources of the planet as if they were a fixed totality, we must now assume responsibility of man's creating the new resources which will be more than adequate to sustain a growing world population at a constantly improved standard of physical per-capita output, and personal consumption'. We also consider the needed resources as a dynamic category. Nuclide economy and nuclide logistics both are needed for identifying of the future development of nuclear power as far we follow the holistic analysis approach 'from cave to grave'. Thus here we try to reasoning of decision making procedures and factors required for it in frame of innovative proposals development and deployment. The nuclear power development is needed in humanitarian scientific support with maximally deep consideration of all inter-disciplinary aspects of the nuclear power and nuclear technologies implementation. The main objectives for such

  16. Determination of proton-induced production cross sections and production rates of {sup 129}I from Te

    Energy Technology Data Exchange (ETDEWEB)

    Schnabel, C.; Lopez-Guitierrez, J.M.; Suter, M. [Eidgenoessische Technische Hochschule, Zurich (Switzerland); Synal, H.A. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Gloris, M.; Leya, I.; Michel, R. [Hannover Univ. (Germany); Herpers, U. [Koeln Univ. (Germany)

    1997-09-01

    In order to model the production of {sup 129}I in meteoroids, proton-induced production cross sections in the medium range of {sup 129}I from Te as well as production from meteoroid simulation experiments have been determined. {sup 129}I is a very important cosmogenic nuclide to study the constancy of cosmic radiation on long time scales. (author) 2 figs., 2 refs.

  17. Cosmogenic production of 7Be and 10Be in the atmosphere

    International Nuclear Information System (INIS)

    O'Brien, K.

    1979-01-01

    Collisions of cosmic-ray particles with nuclei of the air result in the production of energetic secondary nucleons and mesons that in turn collide with other air nuclei to generate a cascade of hadrons through the atmosphere. After its collision with an energetic hadron, the nucleus will be in one or more fragments. Each of these collisions is called a star. About 1.4% of the time, one of the fragments associated with the star will be a 10 Be nucleus, and about 3% of the time, one of the fragments will be 7 Be. The energy spectrum incident on the earth was calculated in the electric field approximation. Ehmert potentials were varied from zero to 1000 MV to encompass the maximum range of solar activity. The geomagnetic field strength was allowed to range from 0.5 to 5 times the current value. The production rates of 7 Be and 10 Be were obtained by calculating the star density as a function of altitude and geomagnetic latitude in the atmosphere. The combined effect of solar modulation and geomagnetic field variation on world-wide star production is shown. The results are in good agreement at each modulation level with the prediction that isotope production should go as Q varies as M - 52 , where M is the geomagnetic field strength given as multiples of the current value. The inventories of these isotopes can be obtained by averaging out the fluctuations produced in the production rate by variations in the solar activity level and the geomagnetic field intensity. This yields 3.5 MCi of Be 10 and 7.7 MCi of Be 7 . 1 figure

  18. Cross Sections for the Production of Residual Nuclides by Proton-Induced Reactions with Uranium at Medium Energies

    International Nuclear Information System (INIS)

    Issa, S.A.M.; Michel, R.; Uosif, M.A.M.; Issa, S.A.M.; Flamentc, J.L.; David, J.C.; Leray, S.

    2009-01-01

    The production of residual nuclides by proton-induced reactions on uranium is investigated using activated targets from irradiation experiments at Saturne II synchrocyclotron at the Laboratory National Saturne/Saclay. These investigations contribute to the European research project NUDATRA within the IP EUROTRANS in which the feasibility of accelerator-driven transmutation of nuclear waste is evaluated. Experimental cross sections are derived from gamma-spectrometric measurements. A total of 1894 cross-section was deter-mined covering 44 residual nuclides in the energy range from 211 MeV to 2530 MeV. The experimental data together with those of earlier work of our group are discussed in the context of theoretical excitation functions calculated by the newly developed INCL4 + ABLA and the TALYS codes

  19. Development and application of the generator for the short-living nuclides production

    International Nuclear Information System (INIS)

    Tsejner, A.

    1979-01-01

    The results are stated of investigations by means of radioisotopes on the substance transfer in technological equipment. For these purposes, in most cases, nuclides with high gamma-activity are used and, if possible, having short half-life because the short half-life gives certain advantages in the cases when it is impossible to store radioactive substances in the technological equipment for a long time. It is noted that in connection with short half-life of the nucludes used for labelling and for the economic and radiation safety reasons, activity of these nuclides can not be high. It has been established that the most suitable nuclide for the labelling purpose is lanthanum-140 produced either in a nuclear reactor, or by means of separation from barium=-140 transforming into lanthanum-140 in an isotopic generator. Some methods of lanthanum separation from barium are described, in particular, in the isotopic generator described, barium is adsorbed on the cation-exchanger KPS-200 having high enough stability with respect to the ionozing radiations. As an eluent the 10 -2 M solution of the complexone (Na 2 - EDTA) was used. The complexone solution can be easely obtained and, because of the hydrolysis, it serves as a buffer solution. The data are given for radiation purity and yield of lanthanum-=140 [ru

  20. Cosmogenic radionuclides in the environment: {sup 32}Si in precipitation samples from the Jungfraujoch, production cross sections of {sup 36}Cl in Argon and modeling of the atmospheric {sup 36}Cl production

    Energy Technology Data Exchange (ETDEWEB)

    Parrat, Y. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-06-01

    The concentrations of the cosmogenic radionuclide {sup 32}Si were measured in four fresh snow samples from the Jungfraujoch in the Swiss Alps (3450 m asl.) to study the feasibility of measuring this potential dating nuclide with Accelerator Mass Spectrometry. This technique could reduce drastically the amount of material needed for measurements of {sup 32}Si concentrations in environmental samples in contrast to conventional radiometric detection. The measured {sup 32}Si concentrations in the snow samples were between 1.84 and 6.28 {mu}Bql{sup -1}. These values agree with other measurements of precipitation samples. The measured {sup 32}Si/Si{sub tot} ratios ranged from 2.5.10{sup -17} to 2.3.10{sup -15} and were thus below the present detection limit of about 10{sup -14}, showing that at present it is not possible to carry out AMS measurements of {sup 32}Si in precipitation samples. For the first time, experimental cross sections of the reaction {sup 40}Ar(p,X){sup 36}Cl have been determined for the proton energy range 16-590 MeV. These cross sections were measured using a gas target, a novel method which was tested successfully by irradiating nitrogen targets to confirm literature values of the N(p,X){sup 7}Be and N(p,X){sup 10}Be cross sections. In fact, good agreement was found between the obtained cross sections with those using solid targets. Production of several radionuclides in the reaction of proton with nickel were also measured. Comparison of these cross sections with literature data proved that the proton flux measurements carried out with ionization chambers were very accurate. The excitation function of the reaction {sup 40}Ar(p,X){sup 36}Cl exhibits two maxima at proton energies of 20 MeV for the (p,{alpha}n)reaction and 95 MeV for the (p,2p3n) reaction, with maximum cross sections of 105 mb and 53 mb, respectively. (author) figs., tabs., refs.

  1. Using cosmogenic isotopes to measure basin-scale rates of erosion

    International Nuclear Information System (INIS)

    Bierman, P.R.; Steig, E.

    1992-01-01

    The authors present a new and different approach to interpreting the abundance of in situ-produced cosmogenic nuclides such as 36 Cl, 26 Al, and 10 Be. Unlike most existing models, which are appropriate for evaluating isotope concentrations on bedrock surfaces, this model can be used to interpret isotope concentration in fluvial sediment. Because sediment is a mixture of material derived from the entire drainage basin, measured isotope abundances can be used to estimate spatially-averaged rates of erosion and sediment transport. Their approach has the potential to provide geomorphologists with a relatively simple but powerful means by which to constrain rates of landscape evolution. The model considers the flux of cosmogenic isotopes into and out of various reservoirs. Implicit in model development are the assumptions that a geomorphic steady-state has been reached and that sampled sediment is spatially and temporally representative of all sediment leaving the basin. Each year, the impinging cosmic-ray flux produces a certain quantity of cosmogenic isotopes in the rock and soil of a drainage basin. For a basin in steady state, the outgoing isotope flux is also constant. They solve for the rate of mass loss as a function of isotope abundance in the sediment, the cosmic ray attenuation length, the isotope half life, and the effective isotope production rate. There are only a few published measurements of cosmogenic isotope abundance in sediment. They calculated model denudation rates for sediment samples from Zaire and central Texas. The denudation rates they calculated appear reasonable and are similar to those they have measured directly on granite landforms in Georgia and southeastern California and those calculated for the Appalachian Piedmont

  2. NNDC Chart of Nuclides

    International Nuclear Information System (INIS)

    Sonzogni, A.

    2008-01-01

    The National Nuclear Data Center has recently developed an interactive chart of nuclides, http://www.nndc.bnl.gov/chart/, that provides nuclear structure and decay data. Since its implementation, it has proven to be one of the most popular web products. The information presented is derived from the ENSDF and Nuclear Wallet Card databases. Experimentally known nuclides are represented by a cell in chart with the number of neutrons on the horizontal axis and the number of protons on the vertical axis. The color of the cell is used to indicate the ground state half-life or the ground state predominant decay mode. (author)

  3. Statistical effects in beta-delayed neutron emission from fission product nuclides

    International Nuclear Information System (INIS)

    McElroy, R.D. Jr.

    1986-01-01

    The delayed neutron spectra for the precursors Rb-93, 94, 95, 96, 97 and Cs-145 were measured by use of the on-line isotope separator facility TRISTAN and a time-of-flight (TOF) spectrometer. Flight paths were used that provided, for energies below 70 keV, a FWHM energy resolution between 2 and 4 percent. Each spectrum showed discrete neutron peaks below 156 keV, with as many as 26 in the Rb-95 spectra. Level densities near the neutron binding energy in the neutron-emitting nuclide were deduced using a missing-level indicator based on a Porter-Thomas distribution of neutron peak intensities. The resulting level density data were compared to the predictions of the Gilbert and Cameron formulism and to those of Dilg, Schantl, Vonach and Uhl. Comparisons were made between the empirically-based level parameter a and the values predicted by each model for Sr-93, 94, 95, 97 and Ba-145. The two models appear, within the uncertainties, to be equally capable of describing these neutron-rich nuclides and equally as capable for them as they are for nuclides in the valley of beta stability. Measurements of the neutron strength function are sometimes possible with the present TOF system for neutron decays with competing neutron branches to levels in the grandchild nucleus. A value for the d-wave strength function of Sr-96 is found to be (4.2 +- 1.1)/10 4 . Improvements in the TOF system, allowing the measurement of the neutron strength function for the more general case, are discussed. 72 refs., 56 figs., 16 tabs

  4. Development of gas-jet transport systems for fission products and coupling these with methods for continuous separation of short-lived product nuclides

    International Nuclear Information System (INIS)

    Stender, E.

    1979-01-01

    The development of gas-jet transport systems for fission products as well as the coupling of these with continuous separation methods from aqueous solutions (SISAK) and with a mass separator for on-line separation of neutron-rich nuclides are described in this work. Nuclides from the fission of 235 U or other fission materials can be transported using gas-jet systems with thermal neutrons over larger distances (100 m and over). Aerosols (clusters) of either organic (e.g. ethylene) or inorganic nature (e.g. potassium chloride) serve as carrier for the nuclides. The clusters are passed through 1 mm capillaries with a transport gas (nitrogen, helium etc.) under laminar flow conditions. The diameter of the cluster fluctuates between 10 -7 and 10 -6 m. The time required from the production of a nuclide to its detection at the end of a 8 m long capillary tube is 0.8 s for the ethylene/nitrogen and potassium chloride/helium gas-jet systems. By coupling various gas-jet systems with the continuous extraction technique SISAK working with H centrifuges, the elements lanthanum, cerium, praseodymium, zirconium, niobium and technetium can be separated out of the complex fission product mixtures. The on-line technetium chemistry was used with neutron-rich 106 Tc (36 s), 107 Tc (21 s) and 108 Tc (5 s) for γγ(t) measurements. The coupling of a potassium chloride/helium gas jet with a mass separator equiped with a plasma ion source is described. The dependence of the transmission rate of various test parameters is investigated to optimize the system. (orig.) [de

  5. The future implications of some long-lived fission product nuclides discharged to the environment in fuel reprocessing wastes

    International Nuclear Information System (INIS)

    Bryant, P.M.; Jones, J.A.

    1972-12-01

    Current reprocessing practice leads to the discharge to the environment of virtually all the krypton-85 and tritium, and a large fraction of the iodine-129, formed as fission products in reactor fuel. As nuclear power programmes expand the global inventory of these long-lived nuclides is increasing. The radiological significance of these discharges is assessed in terms of radiation exposure of various population groups during the next few decades. The results of this assessment show that krypton-85 will give higher dose rates than tritium or iodine-129, but that on conventional radiological protection criteria these do not justify taking action to remove krypton-85 from reprocessing plant effluents before the 21st century. (author)

  6. A 30000 yr record of erosion rates from cosmogenic 10Be in middle European river terraces

    NARCIS (Netherlands)

    Schaller, M.; Blanckenburg, von F.; Veldkamp, A.; Tebbens, L.A.; Hovius, N.; Kubik, P.W.

    2002-01-01

    Cosmogenic 10Be in river-borne quartz sand records a time-integrated erosion rate representative of an entire drainage basin. When sequestered in a terrace of known age, paleo-erosion rates may be recovered from the nuclide content of the terrace material. Paleo-erosion rates between 30 and 80

  7. HETC-3STEP calculations of proton induced nuclide production cross sections at incident energies between 20 MeV and 5 GeV

    Energy Technology Data Exchange (ETDEWEB)

    Takada, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Yoshizawa, Nobuaki; Ishibashi, Kenji

    1996-08-01

    For the OECD/NEA code intercomparison, nuclide production cross sections of {sup 16}O, {sup 27}Al, {sup nat}Fe, {sup 59}Co, {sup nat}Zr and {sup 197}Au for the proton incidence with energies of 20 MeV to 5 GeV are calculated with the HETC-3STEP code based on the intranuclear cascade evaporation model including the preequilibrium and high energy fission processes. In the code, the level density parameter derived by Ignatyuk, the atomic mass table of Audi and Wapstra and the mass formula derived by Tachibana et al. are newly employed in the evaporation calculation part. The calculated results are compared with the experimental ones. It is confirmed that HETC-3STEP reproduces the production of the nuclides having the mass number close to that of the target nucleus with an accuracy of a factor of two to three at incident proton energies above 100 MeV for {sup nat}Zr and {sup 197}Au. However, the HETC-3STEP code has poor accuracy on the nuclide production at low incident energies and the light nuclide production through the fragmentation process induced by protons with energies above hundreds of MeV. Therefore, further improvement is required. (author)

  8. Complete gas production data library for nuclides from Mg to Bi at neutron incident energies up to 200 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Konobeyev, A.Yu.; Fischer, U.

    2015-07-01

    An evaluation of proton-, deuteron-, triton-, {sup 3}He-, and α-particles- production cross-sections was performed for 262 stable nuclides with atomic number from 12 to 83 at the energies of primary neutrons up to 200 MeV. The data were compiled in ENDF formatted data files.

  9. HETC-3STEP calculations of proton induced nuclide production cross sections at incident energies between 20 MeV and 5 GeV

    International Nuclear Information System (INIS)

    Takada, Hiroshi; Yoshizawa, Nobuaki; Ishibashi, Kenji.

    1996-08-01

    For the OECD/NEA code intercomparison, nuclide production cross sections of 16 O, 27 Al, nat Fe, 59 Co, nat Zr and 197 Au for the proton incidence with energies of 20 MeV to 5 GeV are calculated with the HETC-3STEP code based on the intranuclear cascade evaporation model including the preequilibrium and high energy fission processes. In the code, the level density parameter derived by Ignatyuk, the atomic mass table of Audi and Wapstra and the mass formula derived by Tachibana et al. are newly employed in the evaporation calculation part. The calculated results are compared with the experimental ones. It is confirmed that HETC-3STEP reproduces the production of the nuclides having the mass number close to that of the target nucleus with an accuracy of a factor of two to three at incident proton energies above 100 MeV for nat Zr and 197 Au. However, the HETC-3STEP code has poor accuracy on the nuclide production at low incident energies and the light nuclide production through the fragmentation process induced by protons with energies above hundreds of MeV. Therefore, further improvement is required. (author)

  10. Constraining processes of landscape change with combined in situ cosmogenic 14C-10Be analysis

    Science.gov (United States)

    Hippe, Kristina

    2017-10-01

    Reconstructing Quaternary landscape evolution today frequently builds upon cosmogenic-nuclide surface exposure dating. However, the study of complex surface exposure chronologies on the 102-104 years' timescale remains challenging with the commonly used long-lived radionuclides (10Be, 26Al, 36Cl). In glacial settings, key points are the inheritance of nuclides accumulated in a rock surface during a previous exposure episode and (partial) shielding of a rock surface after the main deglaciation event, e.g. during phases of glacier readvance. Combining the short-lived in situ cosmogenic 14C isotope with 10Be dating provides a valuable approach to resolve and quantify complex exposure histories and burial episodes within Lateglacial and Holocene timescales. The first studies applying the in situ14C-10Be pair have demonstrated the great benefit from in situ14C analysis for unravelling complex glacier chronologies in various glacial environments worldwide. Moreover, emerging research on in situ14C in sedimentary systems highlights the capacity of combined in situ14C-10Be analysis to quantify sediment transfer times in fluvial catchments or to constrain changes in surface erosion rates. Nevertheless, further methodological advances are needed to obtain truly routine and widely available in situ14C analysis. Future development in analytical techniques has to focus on improving the analytical reproducibility, reducing the background level and determining more accurate muonic production rates. These improvements should allow extending the field of applications for combined in situ14C-10Be analysis in Earth surface sciences and open up a number of promising applications for dating young sedimentary deposits and the quantification of recent changes in surface erosion dynamics.

  11. NEANDC specialists meeting on yields and decay data of fission product nuclides

    International Nuclear Information System (INIS)

    Chrien, R.E.; Burrows, T.W.

    1983-01-01

    Separate abstracts were prepared for the 29 papers presented. Workshop reports on decay heat, fission yields, beta- and gamma-ray spectroscopy, and delayed neutrons are included. An appendix contains a survey of the most recent compilations and evaluations containing fission product yield, fission product decay data, and delayed neutron yield information

  12. NEANDC specialists meeting on yields and decay data of fission product nuclides

    Energy Technology Data Exchange (ETDEWEB)

    Chrien, R.E.; Burrows, T.W. (eds.)

    1983-01-01

    Separate abstracts were prepared for the 29 papers presented. Workshop reports on decay heat, fission yields, beta- and gamma-ray spectroscopy, and delayed neutrons are included. An appendix contains a survey of the most recent compilations and evaluations containing fission product yield, fission product decay data, and delayed neutron yield information. (WHK)

  13. Status of recent fast capture cross section evaluations for important fission product nuclides

    International Nuclear Information System (INIS)

    Gruppelaar, H.

    1982-01-01

    A comparison is made between recent evaluations of fission-product cross sections as given in the CNEN/CEA, ENDF/B-IV, ENDF/V-V, JENDL-1, RCN-2 and RCN-3 data libraries. The intercomparison is restricted to 24 important fission products in a fast power reactor. The evaluation methods used to obtain the various data files are reviewed and possible shortcomings are indicated. A survey is given of the experimental data based used in the various evaluations. Some graphs are included showing the new ENDF/B-V and RCN-3 fastcapture cross-section evaluations. Further intercomparisons are made by means of multi-group and one-group cross sections. It is shown that lumped fission-product cross sections calculated from the most recent versions of the data files are in quite good agreement with each other. This review concludes with a discussion on observed discrepancies and requests for new measurements. 78 references

  14. Decay and Transmutation of Nuclides

    CERN Document Server

    Aarnio, Pertti A

    1999-01-01

    We present a computer code DeTra which solves analytically the Bateman equations governing the decay, build-up and transmutation of radionuclides. The complexity of the chains and the number of nuclides are not limited. The nuclide production terms considered include transmutation of the nuclides inside the chain, external production, and fission. Time dependent calculations are possible since all the production terms can be re-defined for each irradiation step. The number of irradiation steps and output times is unlimited. DeTra is thus able to solve any decay and transmutation problem as long as the nuclear data i.e. decay data and production rates, or cross sections, are known.

  15. Final results of the 'Benchmark on computer simulation of radioactive nuclides production rate and heat generation rate in a spallation target'

    International Nuclear Information System (INIS)

    Janczyszyn, J.; Pohorecki, W.; Domanska, G.; Maiorino, R.J.; David, J.C.; Velarde, F.A.

    2011-01-01

    A benchmark has been organized to assess the computer simulation of nuclide production and heat generation in a spallation lead target. The physical models applied for the calculation of thick lead target activation do not produce satisfactory results for the majority of analysed nuclides, however one can observe better or worse quantitative compliance with the experimental results. Analysis of the quality of calculated results show the best performance for heavy nuclides (A: 170 - 190). For intermediate nuclides (A: 60 - 130) almost all are underestimated while for A: 130 - 170 mainly overestimated. The shape of the activity distribution in the target is well reproduced in calculations by all models but the numerical comparison shows similar performance as for the whole target. The Isabel model yields best results. As for the whole target heating rate, the results from all participants are consistent. Only small differences are observed between results from physical models. As for the heating distribution in the target it looks not quite similar. The quantitative comparison of the distributions yielded by different spallation reaction models shows for the major part of the target no serious differences - generally below 10%. However, in the most outside parts of the target front layers and the part of the target at its end behind the primary protons range, a spread higher than 40 % is obtained

  16. Cosmogenic 3He in detrital gold

    Science.gov (United States)

    Stuart, Finlay; Yakubovich, Olga; Caracedo, Ana; Nesterenok, Alexander

    2017-04-01

    Since the measurement of cosmogenic He in an alluvial diamond by McConville and Reynolds (1996) the application of cosmogenic noble gases to individual detrital grains to quantify surface processes has not been vigorously pursued. The likely low rate of diffusion of cosmogenic He in native metals, and their resistance to weathering and disintegration during erosion and transport, makes them a potential record of long-term Earth surface processes. In an effort to assess the extent that detrital refractory metals record the exposure history during transport and storage we have undertaken a reconnaissance study of the He isotope composition in 18 grains (2-200 mg) of native gold, copper, silver, and PtPd, Pt3Fe and OsIr alloys from alluvial placer deposits from around the world. 4He is dominantly the result of U and Th decay within the grains, or decay of 190Pt in the Pt-rich alloys. 3He is measurable in 13 grains, concentrations range up to 2.7E+6 atoms/g. 3He/4He are always in excess of the crustal radiogenic ratio, up to 306 Ra. Although nucleogenic 3He produced by (n,α) reactions on 6Li, and 3He from trapped hydrothermal fluids, are present, the majority of the 3He is cosmogenic in origin. Using newly calculated cosmogenic 3He production rates in heavy metals, and a determination of the effect of implantation based on the stopping distances of spallogenic 3He and 3H, the grains have 3Hecos concentrations that are equivalent to 0.35 to 1.5 Ma exposure at Earth's surface. In a study of detrital gold grains from several sites in Scotland we have found that 10 % have 3He concentrations that are significantly in excess of that generated since the Last Glacial Maximum. These studies demonstrate that, with refinement, cosmogenic 3He in refractory detrital minerals can be used to quantify sediment transport and storage on the 1-10 Ma timescale. P. McConville & J.H. Reynolds (1989). Geochim. Cosmochim. Acta, 53, 2365-75.

  17. Nuclide content in reactor waste

    International Nuclear Information System (INIS)

    1981-11-01

    Certain corrosion and fission products of importance in reactor waste management cannot be measured by gammaspectrometric techniques. In this study, a method is suggested by which the occurence of such nuclides can be quantitatively related to suitable gamma-emitters of similar origin. The method is tested by statistical analysis on the waste data recorded from two Swedish nuclear power plants. As this method is not applicable for Carbon-14, this nuclide was measured directly in spent ion exchange resins from three Finnish and Swedish power plants. (author)

  18. Accessing the application of in situ cosmogenic 14C to surface exposure dating of amorphous SiO2

    Science.gov (United States)

    Cesta, J. M.; Goehring, B. M.; Ward, D. J.

    2017-12-01

    We assess the feasibility and utility of in situ cosmogenic 14C as a geochronometer for landforms composed of amorphous SiO2 through the comparison of 14C surface exposure ages to independently determined eruption ages on Obsidian Dome, California. Landforms composed of amorphous SiO2 phases are difficult to date by conventional cosmogenic nuclide methods due to several complications that may arise (e.g., inability to remove meteoric contamination). The onset of an increased understanding of production rates and analytical measurement of in situ 14C in SiO2 provides an opportunity to address this limitation. Obsidian Dome is a 600-year-old phreatomagmatic dome of the Mono-Inyo Craters located in Inyo County, California, and consists of vesicular pumice, obsidian, and rhyolite. Exposure ages from eight obsidian and banded pumice and obsidian surface samples range from 3947 ± 678 to 914 ± 134 years, all significantly older than the accepted radiocarbon age of 650-550 years. δ13C values for the samples range between +2.65‰ and +1.34‰ and show a negative correlation with CO2 yield. The `too old' exposure ages coupled with this negative correlation between δ13C and CO2 yield suggests the incorporation of an atmospheric component of 14C. Measurement of 14C concentrations in shielded, subsurface samples will assist in isolating the atmospheric 14C component and aid in correcting the surface exposure ages.

  19. Cosmogenic 45Sc in Gibeon iron meteorite by radioanalytical neutron activation analysis

    International Nuclear Information System (INIS)

    Oura, Y.; Honda, M.; Ebihara, M.; Bajo, K.; Nagao, K.

    2011-01-01

    Cosmogenic nuclides in many fragments of Gibeon iron meteorite have been studied by Honda and coworkers. They observed that their concentrations varied by 5 orders and found that Gibeon gives two different exposure ages using pair of stable noble gas isotopes and radinuclide. To assess one possible cause for the difference, namely loss of partial noble gases due to atmospheric heating of the incoming meteoroid, concentrations of non-volatile and stable cosmogenic 45 Sc of Gibeon were determined by radiochemical neutron activation analysis (RNAA). For RNAA, a radiochemical procedure using extraction chromatography was developed to separate Sc from an iron meteorite. Concentrations of 45 Sc in 7 fragments ranged from 0.0064 to 0.11 ppb and correlated with cosmogenic 4 He concentrations. This correlation suggests that noble gases in Gibeon were not lost during the fall to the earth. (orig.)

  20. Monte Carlo modelling and comparison with experiment of the nuclide production in thick stony targets isotropically irradiated with 600 MeV protons

    International Nuclear Information System (INIS)

    Aylmer, D.; Herzog, G.F.; Kruse, T.H.; Cloth, P.; Filges, D.; Moniot, R.K.; Signer, P.; Wieler, R.; Tuniz, C.

    1987-05-01

    Depth profiles for the production of stable and radioactive nuclides have been measured for a large variety of target elements in three thick spherical stony targets with radii of 5, 15 and 26 cm isotropically irradiated with 600 MeV protons at the CERN synchrocyclotron. These irradiation experiments (CERN SC96) were intended to simulate the irradiation of meteoroids by galactic cosmic ray protons. In order to combine this experimental approach with a theoretical one the intra- and internuclear cascades were calculated using Monte Carlo techniques via the high energy transport code HET/KFA 1. Together with transport calculations for low energy neutrons by the MORSE-CG code the depth dependent spectra of primary and secondary protons and of secondary neutrons were derived. On the basis of these spectra and a set of evaluated experimental excitation functions for p-induced reactions and of theoretical ones for n-induced reactions, calculated by the code ALICE LIVERMORE 82, theoretical depth profiles for the production of stable and radioactive nuclides in the three thick targets were calculated. This report is a comprehensive survey on all those target/product combination for which both experimental and theoretical data are available. It provides the basis for a detailed discussion of the various production modes of residual nuclides and on the depth and size dependence of their production rates in thick stony targets, serving as a simulation of the galactic cosmic ray irradiation of meteoroids in space. On the other hand the comparison of the experimental and theoretical depth profiles validates the high energy transport calculations, making them a promissing tool for further model calculations of the interactions of cosmic rays with matter. (orig.)

  1. Utilizing Monte-Carlo radiation transport and spallation cross sections to estimate nuclide dependent scaling with altitude

    Science.gov (United States)

    Argento, D.; Reedy, R. C.; Stone, J.

    2010-12-01

    Cosmogenic Nuclides (CNs) are a critical new tool for geomorphology, allowing researchers to date Earth surface events and measure process rates [1]. Prior to CNs, many of these events and processes had no absolute method for measurement and relied entirely on relative methods [2]. Continued improvements in CN methods are necessary for expanding analytic capability in geomorphology. In the last two decades, significant progress has been made in refining these methods and reducing analytic uncertainties [1,3]. Calibration data and scaling methods are being developed to provide a self consistent platform for use in interpreting nuclide concentration values into geologic data [4]. However, nuclide dependent scaling has been difficult to address due to analytic uncertainty and sparseness in altitude transects. Artificial target experiments are underway, but these experiments take considerable time for nuclide buildup in lower altitudes. In this study, a Monte Carlo method radiation transport code, MCNPX, is used to model the galactic cosmic-ray radiation impinging on the upper atmosphere and track the resulting secondary particles through a model of the Earth’s atmosphere and lithosphere. To address the issue of nuclide dependent scaling, the neutron flux values determined by the MCNPX simulation are folded in with estimated cross-section values [5,6]. Preliminary calculations indicate that scaling of nuclide production potential in free air seems to be a function of both altitude and nuclide production pathway. At 0 g/cm2 (sea-level) all neutron spallation pathways have attenuation lengths within 1% of 130 g/cm2. However, the differences in attenuation length are exacerbated with increasing altitude. At 530 g/cm2 atmospheric height (~5,500 m), the apparent attenuation lengths for aggregate SiO2(n,x)10Be, aggregate SiO2(n,x)14C and K(n,x)36Cl become 149.5 g/cm2, 151 g/cm2 and 148 g/cm2 respectively. At 700 g/cm2 atmospheric height (~8,400m - close to the highest

  2. Chart of the nuclides

    International Nuclear Information System (INIS)

    Yoshizawa, Y.; Horiguchi, T.; Yamada, M.

    1980-01-01

    In this chart, four colors are use to classify nuclides according to their half-lives. The different symbols are also to show the decay modes and their percentage in each nuclide. Four tables are provided on the back of the chart. Table 1 is the ordinary periodic Table. Table 2 provides fundamental constants used for nuclear physics. Tables 3 lists the physical constants (mean density, ionization potential, melting point, and boiling point) of all elements. Table 4 provides the gamma-ray intensity standards. Half-lives, energy, relative intensity, and intensity per decay are list for 33 nuclides. (J.P.N.)

  3. Landscape Evolution Mechanisms in Gale Crater from In-Situ Measurement of Cosmogenic Noble Gas Isotopes

    Science.gov (United States)

    Martin, P.; Farley, K. A.; Mahaffy, P. R.; Malespin, C.; Vasconcelos, P. M.

    2017-12-01

    The Sample Analysis at Mars (SAM) instrument onboard the Curiosity rover can measure the noble gas isotopes contained in drilled rock samples on Mars by heating these samples to 930°C. In combination with bulk chemistry measured by the Alpha Particle X-ray Spectrometer (APXS), cosmogenic nuclide production rates can be determined and an exposure age may be calculated. Three cosmogenic nuclides are measured: 3He, and 21Ne, which are produced via spallation of mainly O, Mg, Si, and Al (held mostly in detrital grains); and 36Ar, which is produced from neutron capture of 35Cl (held mostly in secondary materials). To date, three samples have been measured: Cumberland (CB), Windjana (WJ), and Mojave 2 (MJ2). CB yielded 3He, 21Ne, and 36Ar ages of 72 ± 15, 84 ± 28, and 79 ± 24 Ma, respectively [Farley et al., 2014]. Two aliquots of WJ gave error-weighted mean ages of 30 ± 27 Ma (3He), 54 ± 19 Ma (21Ne), and 63 ± 84 Ma (36Ar) [Vasconcelos et al., 2016]. These relatively young ages were interpreted to suggest that a scarp-retreat mechanism is responsible for erosion at both the CB and WJ localities. The most recent measurements on MJ2 do not include the 21Ne isotope because of an instrument issue at this mass. 3He observed in MJ2 is the highest of any sample yet measured, suggesting an exposure age of approximately 1 Ga. In contrast, the calculated exposure age from 36Ar appears to be less than 100 Ma (despite a high uncertainty due to isobaric H35Cl). This discrepancy could be explained by 1) a contribution of extraterrestrial 3He from interplanetary dust or meteoritic fragments, or 2) approximately 1 Ga of prior exposure to the detrital grains. In the latter case 36Ar accumulates only after the Cl-bearing secondary minerals are formed and exposed at the surface. In either scenario the 36Ar measurement provides the better estimate of the recent exposure history. The young upper limit for 36Ar at MJ2 is consistent with the scarp-retreat mechanism observed at CB and

  4. In-situ buildup of cosmogenic isotopes at the earth`s surface: measurement of erosion rates and exposure times

    Energy Technology Data Exchange (ETDEWEB)

    Fifield, L K; Allan, G L; Stone, J O.H.; Evans, J M; Cresswell, R G; Ophel, T R [Australian National Univ., Canberra, ACT (Australia)

    1994-12-31

    Cosmic rays produce a number of nuclides in rocks that can be used to determine the geomorphic history of surfaces. The most useful are the radioactive isotopes {sup 10}Be (t{sub 1/2} = 1.5Ma), {sup 26}Al (0.7Ma) and {sup 36}Cl (0.3Ma). Within the top 2m of the surface, these are produced principally by fast neutrons. At greater depths, production is dominated by the capture of negative muons. Measurements of a single nuclide produced in situ can be used to determine total exposure times or erosion rates. The use of multiple nuclides with different half-lives makes it possible to determine more complex histories, such as exposures interrupted by periods of burial. At the ANU, all three of the isotopes above are being used to study a variety of problems in geomorphology and paleoclimatology, although to date, most of the work has concentrated on {sup 36}Cl. The accumulation of cosmogenic {sup 36}Cl in calcite (CaCO{sub 3}) provides a means of measuring erosion rates on limestone surfaces. Sensitivity is achieved over a wide range of erosion rates due to the high production rate of {sup 36}Cl in calcite (typically greater than 30 atoms/g/yr) and a detection limit of ca. 5000 atoms/g attainable with the ANU AMS system. The method is simplified by the predominance of Ca reactions (principally spallation) over other sources of {sup 36}Cl in calcite, and the ease of sample preparation. This presentation discuss the results of measurements of {sup 36}Cl in calcite from limestone samples from Australia and Papua New Guinea. Erosion rates derived from these measurements range from 3 microns per year (Australia) to over 200 microns per year in the New Guinea highlands. 3 refs.

  5. In-situ buildup of cosmogenic isotopes at the earth's surface: measurement of erosion rates and exposure times

    International Nuclear Information System (INIS)

    Fifield, L.K.; Allan, G.L.; Stone, J.O.H.; Evans, J.M.; Cresswell, R.G.; Ophel, T.R.

    1993-01-01

    Cosmic rays produce a number of nuclides in rocks that can be used to determine the geomorphic history of surfaces. The most useful are the radioactive isotopes 10 Be (t 1/2 = 1.5Ma), 26 Al (0.7Ma) and 36 Cl (0.3Ma). Within the top 2m of the surface, these are produced principally by fast neutrons. At greater depths, production is dominated by the capture of negative muons. Measurements of a single nuclide produced in situ can be used to determine total exposure times or erosion rates. The use of multiple nuclides with different half-lives makes it possible to determine more complex histories, such as exposures interrupted by periods of burial. At the ANU, all three of the isotopes above are being used to study a variety of problems in geomorphology and paleoclimatology, although to date, most of the work has concentrated on 36 Cl. The accumulation of cosmogenic 36 Cl in calcite (CaCO 3 ) provides a means of measuring erosion rates on limestone surfaces. Sensitivity is achieved over a wide range of erosion rates due to the high production rate of 36 Cl in calcite (typically greater than 30 atoms/g/yr) and a detection limit of ca. 5000 atoms/g attainable with the ANU AMS system. The method is simplified by the predominance of Ca reactions (principally spallation) over other sources of 36 Cl in calcite, and the ease of sample preparation. This presentation discuss the results of measurements of 36 Cl in calcite from limestone samples from Australia and Papua New Guinea. Erosion rates derived from these measurements range from 3 microns per year (Australia) to over 200 microns per year in the New Guinea highlands. 3 refs

  6. In-situ buildup of cosmogenic isotopes at the earth`s surface: measurement of erosion rates and exposure times

    Energy Technology Data Exchange (ETDEWEB)

    Fifield, L.K.; Allan, G.L.; Stone, J.O.H.; Evans, J.M.; Cresswell, R.G.; Ophel, T.R. [Australian National Univ., Canberra, ACT (Australia)

    1993-12-31

    Cosmic rays produce a number of nuclides in rocks that can be used to determine the geomorphic history of surfaces. The most useful are the radioactive isotopes {sup 10}Be (t{sub 1/2} = 1.5Ma), {sup 26}Al (0.7Ma) and {sup 36}Cl (0.3Ma). Within the top 2m of the surface, these are produced principally by fast neutrons. At greater depths, production is dominated by the capture of negative muons. Measurements of a single nuclide produced in situ can be used to determine total exposure times or erosion rates. The use of multiple nuclides with different half-lives makes it possible to determine more complex histories, such as exposures interrupted by periods of burial. At the ANU, all three of the isotopes above are being used to study a variety of problems in geomorphology and paleoclimatology, although to date, most of the work has concentrated on {sup 36}Cl. The accumulation of cosmogenic {sup 36}Cl in calcite (CaCO{sub 3}) provides a means of measuring erosion rates on limestone surfaces. Sensitivity is achieved over a wide range of erosion rates due to the high production rate of {sup 36}Cl in calcite (typically greater than 30 atoms/g/yr) and a detection limit of ca. 5000 atoms/g attainable with the ANU AMS system. The method is simplified by the predominance of Ca reactions (principally spallation) over other sources of {sup 36}Cl in calcite, and the ease of sample preparation. This presentation discuss the results of measurements of {sup 36}Cl in calcite from limestone samples from Australia and Papua New Guinea. Erosion rates derived from these measurements range from 3 microns per year (Australia) to over 200 microns per year in the New Guinea highlands. 3 refs.

  7. Nuclides and isotopes. Twelfth edition

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    This explanatory booklet was designed to be used with the Chart of the Nuclides. It contains a brief history of the atomic theory of matter: ancient speculations, periodic properties of elements (Mendeleev table), radioactivity, early models of atomic structure, the Bohr atom, quantum numbers, nature of isotopes, artificial radioactivity, and neutron fission. Information on the pre-Fermi (natural) nuclear reactor at Oklo and the search for superheavy elements is given. The booklet also discusses information presented on the Chart and its coding: stable nuclides, metastable states, data display and color, isotopic abundances, neutron cross sections, spins and parities, fission yields, half-life variability, radioisotope power and production data, radioactive decay chains, and elements without names. The Periodic Table of the Elements is appended. 3 figures, 3 tables

  8. A multi-nuclide approach to quantify long-term erosion rates and exposure history through multiple glacial-interglacial cycles

    DEFF Research Database (Denmark)

    Strunk, Astrid; Larsen, Nicolaj Krog; Knudsen, Mads Faurschou

    Cosmogenic nuclides are traditionally used to either determine the glaciation history or the denudation history of the most recent exposure period. A few studies use the cosmogenic nuclides to determine the cumulative exposure and burial durations of a sample. However, until now it has not been...... possible to resolve the complex pattern of exposure history under a fluctuating ice sheet. In this study, we quantify long-term erosion rates along with durations of multiple exposure periods in West Greenland by applying a novel Markov Chain Monte Carlo (MCMC) inversion approach to existing 10Be and 26Al....... The new MCMC approach allows us to constrain the most likely landscape history based on comparisons between simulated and measured cosmogenic nuclide concentrations. It is a fundamental assumption of the model that the exposure history at the site/location can be divided into two distinct regimes: i...

  9. Numerical dating of a Late Quaternary spit-shoreline complex at the northern end of Silver Lake playa, Mojave Desert, California: A comparison of the applicability of radiocarbon, luminescence, terrestrial cosmogenic nuclide, electron spin resonance, U-series and amino acid racemization methods

    Science.gov (United States)

    Owen, L.A.; Bright, Jordon; Finkel, R.C.; Jaiswal, M.K.; Kaufman, D.S.; Mahan, S.; Radtke, U.; Schneider, J.S.; Sharp, W.; Singhvi, A.K.; Warren, C.N.

    2007-01-01

    A Late Quaternary spit-shoreline complex on the northern shore of Pleistocene Lake Mojave of southeastern California, USA was studied with the goal of comparing accelerator mass spectrometry (AMS) radiocarbon, luminescence, electron spin resonance (ESR), terrestrial cosmogenic radionuclide (TCN) surface exposure, amino acid racemization (AAR) and U-series dating methods. The pattern of ages obtained by the different methods illustrates the complexity of processes acting in the lakeshore environment and highlights the utility of a multi-method approach. TCN surface exposure ages (mostly ???20-30 ka) record the initial erosion of shoreline benches, whereas radiocarbon ages on shells (determined in this and previous studies) within the spit, supported by AAR data, record its construction at fluctuating lake levels from ???16 to 10 ka. Luminescence ages on spit sediment (???6-7 ka) and ESR ages on spit shells (???4 ka) are anomalously young relative to radiocarbon ages of shells within the same deposits. The significance of the surprisingly young luminescence ages is not clear. The younger ESR ages could be a consequence of post-mortem enrichment of U in the shells. High concentrations of detrital thorium in tufa coating spit gravels inhibited the use of single-sample U-series dating. Detailed comparisons such as this provide one of the few means of assessing the accuracy of Quaternary dating techniques. More such comparisons are needed. ?? 2007 Elsevier Ltd and INQUA.

  10. Evidence for an increase in cosmogenic 10Be during a geomagnetic reversal

    International Nuclear Information System (INIS)

    Raisbeck, G.M.; Yiou, F.; Bourles, D.

    1985-01-01

    The authors report evidence in marine sediments for an increase in cosmogenic 10 Be production in the Earth's atmosphere during the Brunhes-Matuyama reversal 730,000 yr ago. In addition to confirming an increase in cosmogenic isotope production, the results provide information on the magnitude and duration of the geomagnetic intensity decrease during such an event, and the depth at which remanent magnetism is acquired in marine sediments. (author)

  11. Cosmogenic radionuclides as a synchronisation tool - present status

    Science.gov (United States)

    Muscheler, Raimund; Adolphi, Florian; Mekhaldi, Florian; Mellström, Anette; Svensson, Anders; Aldahan, Ala; Possnert, Göran

    2014-05-01

    Changes in the flux of galactic cosmic rays into Earth's atmosphere produce variations in the production rates of cosmogenic radionuclides. The resulting globally synchronous signal in cosmogenic radionuclide records can be used to compare time scales and synchronise climate records. The most prominent example is the 14C wiggle match dating approach where variations in the atmospheric 14C concentration are used to match climate records and the tree-ring based part of the 14C calibration record. This approach can be extended to other cosmogenic radionuclide records such as 10Be time series provided that the different geochemical behaviour of 10Be and 14C is taken into account. Here we will present some recent results that illustrate the potential of using cosmogenic radionuclide records for comparing and synchronising different time scales. The focus will be on the last 50000 years where we will show examples how geomagnetic field, solar activity and unusual short-term cosmic ray changes can be used for comparing ice core, tree ring and sediment time scales. We will discuss some unexpected offsets between Greenland ice core and 14C time scale and we will examine how far back in time solar induced 10Be and 14C variations presently can be used to reliably synchronise ice core and 14C time scales.

  12. Radioactive nuclide adsorption

    International Nuclear Information System (INIS)

    Fukushima, Kimichika.

    1982-01-01

    Purpose: To improve the efficiency of a radioactive nuclide adsorption device by applying a nickel plating on a nickel plate to render the surface active. Constitution: A capturing device for radioactive nuclide such as manganese 54, cobalt 60, 58 and the like is disposed to the inside of a pipeway provided on the upper portion of fuel assemblies through which liquid sodium as the coolant for LMFBR type reactor is passed. The device comprises a cylindrical adsorption body and spacers. The adsorption body is made of nickel and applied with a nickel plating on the surface thereof. The surface of the adsorption body is unevened to result in disturbance in the coolant and thereby improve the adsorptive efficiency. (Kawakami, Y.)

  13. Chart of nuclides relating to neutron activation

    International Nuclear Information System (INIS)

    Okada, Minoru

    1981-09-01

    This chart is for frequent use in the prediction of the product species of neutron activation. The first edition of the chart has been made in 1976 after the repeated trial preparation. It has the following good points. (1) Any letter in chart is as large as one can read easily. [This condition has been obtained by the selection of items to be shown in chart. They are the name (the symbol of element, mass number, and half-life) of nuclide or of isomer, and the type of decay.]. (2) Decay product has been shown indirectly for branchings with two-step decay via short-lived daughter in an excited state. [This matter has been realized by use of the new mode of indication.] (3) Nuclides shown in chart are (a) naturally occurring nuclides and (b) nuclides formed from naturally occurring nuclides through one of the following reactions: (n, γ), (n, n'), (n, p), (n, α), (n, 2n), (n, pn), (n, 3n), (n, αn), (n, t), (n, 3 He), (n, 2p), and (n, γ)(n, γ). In the revision of the first edition, some modes of indication have become a little simpler, and the isomers of shorter half-lives (0.1 - 1 μs) have been added. (author)

  14. WWW chart of the nuclides

    International Nuclear Information System (INIS)

    Huang Xiaolong; Zhou Chunmei; Zhuang Youxiang; Zhao Zhixiang; Golashvili, T.V.; Chechev, V.P.

    2000-01-01

    WWW chart of the nuclides was established on the basis of the latest evaluations of nuclear structure and decay data. By viewing WWW chart of the nuclides, one can retrieve the fundamental data of nuclide such as atomic mass, abundance, spin and parity; the decay mode, branching ratio, half-life and Q-value of radioactive nuclide, energy and intensity of strong γ-ray, etc. The URL (Uniform Resource Locator) of WWW chart of the nuclides is: http://myhome.py.gd.cn/chart/index,asp

  15. Production of neutron-rich nuclides in the vicinity of N = 126 shell closure in multinucleon transfer reactions

    Directory of Open Access Journals (Sweden)

    Karpov Alexander

    2017-01-01

    Full Text Available Multinucleon transfer in low-energy nucleus-nucleus collisions is widely discussed as a method of production of yet-unknown neutron-rich nuclei hardly accessible (or inaccessible by other methods. Modeling of complicated dynamics of nuclear reactions induced by heavy ions is done within a multidimensional dynamical model of nucleus-nucleus collisions based on the Langevin equations. The model gives a continuous description of the system evolution starting from the well-separated target and projectile in the entrance channel of the reaction up to the formation of final reaction products. In this paper, rather recent sets of experimental data for the 136Xe+198Pt,208Pb reactions are analyzed together with the production cross sections for neutron-rich nuclei in the vicinity of the N = 126 magic shell.

  16. Calculated cross sections for production and destruction of some long-lived nuclides of importance in fusion energy applications

    International Nuclear Information System (INIS)

    Gardner, M.A.; Gardner, D.G.

    1993-01-01

    Knowledge of the production and destruction of long-lived species via neutrons, photons, and charged-particles is required in many fusion energy applications, such as reactor first-wall and blanket design, radioactive waste management, etc. Here we describe our calculational results for the production, via the (n,2n) reaction, of the following long-lived species: 150 Eu(t 1/2 = 36 y), 152 Eu(t 1/2 = 13 y), and 192m2 Ir(t 1/2 = 241 y). Some comments on calculations that we've made for destruction reactions of these species are also included

  17. Radioactive equilibria and disequilibria of U-series nuclides in the products from Izu arc volcanoes, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Kurihara, Y.; Sato, J. [Meiji Univ., Kawasaki, Kanagawa (Japan). Dept. of Applied Chemistry; Takahashi, M. [Central Research Institute of Electric Power Industry, Tokyo (Japan). Radiation Safety Research Center

    2011-07-01

    Activity ratios among {sup 238}U-{sup 230}Th-{sup 226}Ra in the products from Izu arc volcanoes, Japan, were observed in order to estimate the time scale of magmatic processes and the magma generation for Izu arc volcanism. Activity ratios of {sup 238}U/{sup 230}Th and {sup 226}Ra/{sup 230}Th in the basaltic and andesitic products from Izu arc volcanoes were greater than unity, being enriched in {sup 238}U and {sup 226}Ra relative to {sup 230}Th. The {sup 226}Ra/{sup 230}Th activity ratio versus {sup 238}U/{sup 230}Th activity ratio diagram for these products showed positive correlation, suggesting that the {sup 238}U-{sup 230}Th-{sup 226}Ra disequilibria occurred during the magma genesis by the additions of U- and Ra-rich fluids derived from the subducting slab by dehydration to the mantle wedge. The {sup 230}Th-{sup 226226}Ra radioactive disequilibria observed in the basaltic and andesitic products imply a short period of time (<8000 years) between the magma genesis and the eruption. The majority of rhyolitic products was considered to be almost in equilibrium of {sup 238}U={sup 230}Th={sup 226}Ra. The observation that {sup 238}U-{sup 230}Th-{sup 226}Ra for the rhyolite are in radioactive equilibrium suggested that the rhyolitic magma from Izu arc was generated in the partial melting of the earth crust heated by the basaltic magma of high temperature. (orig.)

  18. Cosmogenic activation of xenon and copper

    Energy Technology Data Exchange (ETDEWEB)

    Baudis, Laura; Kish, Alexander; Piastra, Francesco [University of Zuerich, Department of Physics, Zuerich (Switzerland); Schumann, Marc [University of Bern, Albert Einstein Center for Fundamental Physics, Bern (Switzerland)

    2015-10-15

    Rare event search experiments using liquid xenon as target and detection medium require ultra-low background levels to fully exploit their physics potential. Cosmic ray induced activation of the detector components and, even more importantly, of the xenon itself during production, transportation and storage at the Earth's surface, might result in the production of radioactive isotopes with long half-lives, with a possible impact on the expected background. We present the first dedicated study on the cosmogenic activation of xenon after 345 days of exposure to cosmic rays at the Jungfraujoch research station at 3470 m above sea level, complemented by a study of copper which has been activated simultaneously. We have directly observed the production of {sup 7}Be, {sup 101}Rh, {sup 125}Sb, {sup 126}I and {sup 127}Xe in xenon, out of which only {sup 125}Sb could potentially lead to background for a multi-ton scale dark matter search. The production rates for five out of eight studied radioactive isotopes in copper are in agreement with the only existing dedicated activation measurement, while we observe lower rates for the remaining ones. The specific saturation activities for both samples are also compared to predictions obtained with commonly used software packages, where we observe some underpredictions, especially for xenon activation. (orig.)

  19. Evaluating steady-state soil thickness by coupling uranium series and 10Be cosmogenic radionuclides

    Science.gov (United States)

    Vanacker, Veerle; Schoonejans, Jerome; Opfergelt, Sophie; Granet, Matthieu; Christl, Marcus; Chabaux, Francois

    2017-04-01

    Within the Critical Zone, the development of the regolith mantle is controlled by the downwards propagation of the weathering front into the bedrock and denudation at the surface of the regolith by mass movements, water and wind erosion. When the removal of surface material is approximately balanced by the soil production, the soil system is assumed to be in steady-state. The steady state soil thickness (or so-called SSST) can be considered as a dynamic equilibrium of the system, where the thickness of the soil mantle stays relatively constant over time. In this study, we present and compare analytical data from two independent isotopic techniques: in-situ produced cosmogenic nuclides and U-series disequilibria to constrain soil development under semi-arid climatic conditions. The Spanish Betic Cordillera (Southeast Spain) was selected for this study, as it offers us a unique opportunity to analyze soil thickness steady-state conditions for thin soils of semiarid environments. Three soil profiles were sampled across the Betic Ranges, at the ridge crest of zero-order catchments with distinct topographic relief, hillslope gradient and 10Be-derived denudation rate. The magnitude of soil production rates determined based on U-series isotopes (238U, 234U, 230Th and 226Ra) is in the same order of magnitude as the 10Be-derived denudation rates, suggesting steady state soil thickness in two out of three sampling sites. The results suggest that coupling U-series isotopes with in-situ produced radionuclides can provide new insights in the rates of soil development; and also illustrate the potential frontiers in applying U-series disequilibria to track soil production in rapidly eroding landscapes characterized by thin weathering depths.

  20. Proton induced reactions on Ti, V, Mn, Fe, Co and Ni. Measurement and hybrid model analysis of integral excitation functions and their application in model calculation for the production of cosmogenic nuclides

    International Nuclear Information System (INIS)

    Stueck, R.

    1983-01-01

    By means of the stacked foil technique 67 excitation functions of p induced reactions on the target elements Ti, V, Mn, Fe, Co, and Ni were measured in the energy range between 45 and 200 MeV. For residual nuclei with 42 [de

  1. NUCLIDES 2000: an electronic chart of the nuclides

    International Nuclear Information System (INIS)

    Galy, J.; Magill, J.

    2000-01-01

    Radionuclides have many applications in agriculture, medicine, industry and research. For basic information on such radioactive materials, the Chart of the Nuclides has proved to be an indispensable tool for obtaining data on radionuclides and working out qualitatively decay schemes and reaction paths. These Charts are, however, of limited use when one requires quantitative information on the decaying nuclide and its daughters. This was the motivation for the development of the NUCLIDES 2000 software package. The radioactive decay data used in NUCLIDES 2000 is based on the Joint Evaluated File (Jeff) version 2.2. The present version of the program contains decay data on approximately 2700 radionuclides. (authors)

  2. Experimental and theoretical study of the residual nuclide production in 40-2600 MeV proton-irradiated thin targets of ads structure materials

    International Nuclear Information System (INIS)

    Titarenko, Yu.E.; Batyaev, V.F.; Belonozhenko, A.A.; Borovlev, S.P.; Butko, M.A.; Florya, S.N.; Pavlov, K.V.; Rogov, V.I.; Tikhonov, R.S.; Titarenko, A.Yu.; Zhivun, V.M.

    2011-10-01

    The Project is aimed at experimental and theoretical studying the independent and cumulative yields of residual radioactive nuclei produced in high-energy proton-irradiated structure materials intended for constructing the high-power Accelerator-Driven Systems (ADS) with a high-current proton accelerator. The Project is an extension of the researches carried out earlier under the ISTC Projects #017, #839, and #2002 which provided more 10000 residual nuclide production cross sections mainly in materials intended to use as target materials of the ADS. This Project includes 57 measurement runs carried out using the 97 targets made only of the ADS structural materials of both monoisotopic ( 56 Fe, 93 Nb, 181 Ta) and natural ( nat Cr, nat Ni, nat W) compositions within minutely fractionated proton energy range, namely, at 0.04, 0.07, 0.1, 0.15, 0.25, 0.4, 0.6, 0.8, 1.2, 1.6 and 2.6GeV. All the targets were irradiated using the ITEP U-10 proton synchrotron. The experimental nuclide yields are determined by the direct γ-spectrometry and α-spectrometry methods. As a result, 3839 cumulative and independent yields of residual β-radioactive product nuclei with lifetimes range from 6 minutes to 10 years as well as 12 cumulative yields of α- radioactive 148 Gd whose lifetime is 74.6 years have been measured. Besides, the cross sections for the 27 Al(p,x) 22 Na , 27 Al(p,x) 24 Na and 27 Al(p,x) 7 Be monitor reactions have been measured at the same proton energies with the use of the current transformer technique. The γ-spectrometer resolution is 1.8 keV in the 1332 keV 60 Co γ-line. The experimental γ-spectra were processed by the GENIE2000 code. The γ-lines were identified, and the cross sections calculated, by the ITEP-developed SIGMA code using the PCNUDAT database. The proton fluence was monitored by the 27 Al(p,x) 22 Na reaction. Measurement data have been compared with the calculation results of the BERTINI and ISABEL models of MCNPX code, CEM03.02, INCL 4.2, INCL4

  3. INC Model interpretation of the proton induced residual nuclide production cross sections below 2 GeV

    International Nuclear Information System (INIS)

    Divadeenam, M.; Ward, T.E.; Spergel, M.S.; Lakatos, S.; Manche, E.P.

    1991-01-01

    For the purposes of interpreting the abundances of various isotopes in meteorites or on lunar and planetary surfaces exposed to fragmentation by cosmic rays, Webber et al. recently reported the measured total elemental and isotopic cross sections with heavy ions as projectiles on H, He, and C targets with beam energies of 0.33 - 1.7 GeV/nucleon. We employ the INC model to predict the fragmentation of the heavy ions in a hydrogen target with the inverse reaction process: proton bombardment of a heavy-ion nucleus leading to spallation products. Charge-changing and mass-changing cross sections are calculated for proton bombardment of an 56 Fe target with beam energies ranging from 0.33 to 1.88 GeV. Total Z-changing and A-changing cross sections in the energy range 0.6 to 1.88 GeV are in excellent agreement with the corresponding experimental data of Webber et al. and Westfall at al., while the agreement below 0.6 GeV proton energy is not as good. The general trend of the Z-changing cross sections are reproduced by the model calculations at each proton incident energy. The interaction of 200-MeV protons with synthetic Stony Meteorite samples was undertaken to explain radionuclide production in a cosmic-ray environment. The BNL Linac 200-MeV-proton beam was used to irradiate synthetic Stony Meteorites to simulate cosmic-ray exposures corresponding to 6.4 and 16.4 million years. Each irradiated sample was analyzed with the help of a high-resolution gamma-ray spectrometer for long-lived radioisotopes. The intranuclear cascade code HETC was employed to simulate the 200-MeV proton bombardment on the meteorite samples to predict the radionuclides 7 Be, 22 Na, 46 Mn, and 56 Co produced in the experimental investigation

  4. Reconstruction of the Exposure Histories of 20 Allan Hills Ordinary Chondrites on the Basis of Cosmogenic 10Be, 26Al, Noble Gases, and Cosmic Ray Tracks

    Science.gov (United States)

    Neupert, U.; Knauer, M.; Michel, R.; Loeken, Th.; Schultz, L.; Dittrich-Hannen, B.; Suter, M.; Kubik, P. W.; Metzler, K.; Romstedt, J.

    1995-09-01

    Twenty ordinary chondrites from the 1988/89 meteorite search (ALH 88004, 88008, 88010, 88011, 88013, 88016 to 88021, 88026 to 88031, 88033, 88039, 88042) [1,2] were investigated for 10Be and 26Al, and for He, Ne and Ar by accelerator and rare gas mass spectrometry, respectively. Cosmic ray tracks were measured in samples of ALH 88019. Using theoretical production rates calculated by a physical model [3] the experimental data are interpreted with respect to the reconstruction of the preatmospheric exposure conditions and exposure histories of the meteoroids. Ordinary chondrites are particularly well suited to exemplify the capabilities of an interpretation of many cosmogenic nuclides measured in one sample. Model calculations of GCR production rates were performed for 10Be, 26Al, 3He, 21Ne, 22Ne and 38Ar as reported elsewhere [4,5]. For all meteorites, except for ALH 88019, the cosmogenic nuclide data can be explained by simple one stage exposure histories between 3 Ma and 44 Ma in meteoroids with radii between 5 cm and 85 cm. Exposure ages were derived from cosmogenic 3He, 21Ne and 38Ar on the basis of the theoretical production rates as function of3He/21Ne and 22Ne/21Ne as well as on the empirical ones proposed by Eugster [6]. The average ratios of exposure ages determined from theoretical production rates to those calculated according to Eugster [6] were 1.08+/-0.11, 1.11+/-0.25 and 1.12+/-0.17 in case of 3He, 21Ne and 38Ar, respectively. Repeated measurements of 10Be and 26Al in ALH 88019 resulted in 10.4+/-1.3 dpm/kg and 5.6+/-0.5 dpm/kg, respectively. But, the cosmogenic rare gas concentrations point to a (single stage) exposure age of 39 Ma in a meteoroid. This is in accordance with a measured cosmic ray track density in olivine of 2.8 * 10^6 cm^-2. The samples are from depths betwen 3 cm and 8 cm. Based on the track data we obtain a minimum meteoroid radius of 8 cm. The low 10Be and 26Al cannot be explained by a one stage exposure history and a long

  5. Recent developments and on-line tests of uranium carbide targets for production of nuclides far from

    CERN Document Server

    V.N. Panteleev et al.

    The capacity of uranium carbide target materials of different structure and density for production of neutron-rich and heavy neutron-deficient isotopes have been investigated at the IRIS facility (PNPI) in the collaboration with Legnaro – GANIL – Orsay laboratories. The yields and release times of the species produced in the targets by the reactions induced by a 1 GeV proton beam of the PNPI synchrocyclotron have been measured. For the purpose to elaborate the most efficient and fast uranium carbide target prototype three kinds of the target materials were studied: a) a high density UC target material having ceramic-like structure with the density of 11 g/cm3 and the grain dimensions of about 200 microns; b) a high density UC target material with the density of 12 g/cm3 and the grain dimensions of about 20 microns prepared by the method of the powder metallurgy; c) a low density UCx target material with the density 3g/cm3 and the grain dimensions of about 20 microns prepared by the ISOLDE method. The comp...

  6. Production of the entire range of r-process nuclides by black hole accretion disc outflows from neutron star mergers

    Science.gov (United States)

    Wu, Meng-Ru; Fernández, Rodrigo; Martínez-Pinedo, Gabriel; Metzger, Brian D.

    2016-12-01

    We consider r-process nucleosynthesis in outflows from black hole accretion discs formed in double neutron star and neutron star-black hole mergers. These outflows, powered by angular momentum transport processes and nuclear recombination, represent an important - and in some cases dominant - contribution to the total mass ejected by the merger. Here we calculate the nucleosynthesis yields from disc outflows using thermodynamic trajectories from hydrodynamic simulations, coupled to a nuclear reaction network. We find that outflows produce a robust abundance pattern around the second r-process peak (mass number A ˜ 130), independent of model parameters, with significant production of A spike at A = 132 that is absent in the Solar system r-process distribution. The spike arises from convection in the disc and depends on the treatment of nuclear heating in the simulations. We conclude that disc outflows provide an important - and perhaps dominant - contribution to the r-process yields of compact binary mergers, and hence must be included when assessing the contribution of these systems to the inventory of r-process elements in the Galaxy.

  7. Nuclides.net: A computational environment for nuclear data and applications in radioprotection and radioecology

    International Nuclear Information System (INIS)

    Berthou, V.; Galy, J.; Leutzenkirchen, K.

    2004-01-01

    An interactive multimedia tool, Nuclides.net, has been developed at the Institute for Transuranium Elements. The Nuclides.net 'integrated environment' is a suite of computer programs ranging from a powerful user-friendly interface, which allows the user to navigate the nuclides chart and explore the properties of nuclides, to various computational modules for decay calculations, dosimetry and shielding calculations, etc. The product is particularly suitable for environmental radioprotection and radioecology. (authors)

  8. Cosmogenic activation of germanium used for tonne-scale rare event search experiments

    Science.gov (United States)

    Wei, W.-Z.; Mei, D.-M.; Zhang, C.

    2017-11-01

    We report a comprehensive study of cosmogenic activation of germanium used for tonne-scale rare event search experiments. The germanium exposure to cosmic rays on the Earth's surface are simulated with and without a shielding container using Geant4 for a given cosmic muon, neutron, and proton energy spectrum. The production rates of various radioactive isotopes are obtained for different sources separately. We find that fast neutron induced interactions dominate the production rate of cosmogenic activation. Geant4-based simulation results are compared with the calculation of ACTIVIA and the available experimental data. A reasonable agreement between Geant4 simulations and several experimental data sets is presented. We predict that cosmogenic activation of germanium can set limits to the sensitivity of the next generation of tonne-scale experiments.

  9. Transuranium nuclides in the environment

    International Nuclear Information System (INIS)

    1976-01-01

    Projected development of nuclear power up to the year 2000 entails a substantial increase in the number of nuclear power reactors, of irradiated fuel reprocessing plants and of various other supporting facilities in the nuclear fuel cycle. In this period, transuranium elements, especially plutonium, will be produced in substantial quantities as by-products of the fission process and for use as fuel in present and future nuclear power reactors; these elements will have other peaceful applications as well. Growing world-wide interest and a natural desire to protect man and his environment have led to increasing concern in public, scientific and governmental sectors about the, release of such radionuclides into the environment. Although releases of transuranium nuclides from existing nuclear facilities can be controlled to very low levels, it is essential, in view of their long half-lives and high relative radiotoxicities, that their fate in the environment be understood well enough to permit associated potential impacts to be assessed and hence effective control to be provided. Extensive studies for many years have investigated the distribution and behaviour of these elements and potential detriments resulting from their release to the environment. More recently, scientists have begun to make projections for evaluating the degree of control necessary if such materials are to enter the complex chain of commercial activities associated with nuclear power production

  10. Efficiency Of Transuranium Nuclides Transmutation

    International Nuclear Information System (INIS)

    Kazansky, Yu.A.; Klinov, D.A.; Semenov, E.V.

    2002-01-01

    One of the ways to create a wasteless nuclear power is based on transmutation of spent fuel nuclides. In particular, it is considered that the radioactivity of the nuclear power wastes should be the same (or smaller), than radioactivity of the uranium and the thorium extracted from entrails of the Earth. The problem of fission fragments transmutation efficiency was considered in article, where, in particular, the concepts of transmutation factor and the ''generalised'' index of biological hazard of the radioactive nuclides were entered. The transmutation efficiency has appeared to be a function of time and, naturally, dependent on nuclear power activity scenario, from neutron flux, absorption cross-sections of the nuclides under transmutation and on the rate of their formation in reactors. In the present paper the efficiency of the transmutation of transuranium nuclides is considered

  11. Applications of cosmogenic radio-isotopes, 10Be, 26Al and 36CI in the Earth Sciences using AMS at ANSTO

    International Nuclear Information System (INIS)

    Fink, D.; Elliot, G.

    1997-01-01

    Production of long-lived cosmogenic radionuclides (CRN) is dominated by cosmic ray interaction in the upper atmosphere. Through atmospheric transport and precipitation, they become distributed over the Earth's surface, and participate in various geochemical and geophysical global processes. An alternate production mode of CRNs is in the Earth's lithosphere, particularly in exposed rocks and surfaces. The production rate of these in-situ produced CRNs depends primarily on the reaction mode and type of target material. Although production is small - a few tens of atoms per gram per year - the built-up in concentration even after a few thousand years of exposure can be measured using the technique of Accelerator Mass Spectrometry. Concentrations of in situ nuclides in the near-surface zone allows a 'surface exposure history' to be estimated resulting in a measure of exposure ages and erosion rates. With a range in half-lives from 0.3-1.5 Ma, in-situ produced CRNs are ideally suited as geochronometers and tracers in Quaternary geomorphology related to paleoclimate change. This paper will briefly outline principles and techniques of 10 Be, 26 AI and 36 CI in-situ methods and describe Some of the above projects related to the unique geomorphology of the Australian and Antarctic continents

  12. Cosmogenic Radionuclides in Bunburra Rockhole Achondrite Fall

    Czech Academy of Sciences Publication Activity Database

    Welten, K.C.; Nishiizumi, K.; Caffee, M. W.; Meier, M.M.M.; Bland, P.A.; Spurný, Pavel

    2009-01-01

    Roč. 44, Supplement (2009), A216-A216 ISSN 1086-9379. [Annual Meeting of the Meteoritical Society /72./. Nancy, 13.06.2009-18.06.2009] Institutional research plan: CEZ:AV0Z10030501 Keywords : Bunburra Rockhole * cosmogenic radionuclide concentrations Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 3.253, year: 2009

  13. Cosmogenic nuclides constrain surface fluctuations of an East Antarctic outlet glacier since the Pliocene.

    OpenAIRE

    Jones, R.S.; Norton, K.P.; Mackintosh, A.N.; Anderson, J.T.H.; Kubik, P.; Vockenhuber, C.; Wittman, H.; Fink, D.; Wilson, G.S.; Golledge, N.R.; McKay, R.

    2017-01-01

    Understanding past changes in the Antarctic ice sheets provides insight into how they might respond to future climate warming. During the Pliocene and Pleistocene, geological data show that the East Antarctic Ice Sheet responded to glacial and interglacial cycles by remaining relatively stable in its interior, but oscillating at its marine-based margin. It is currently not clear how outlet glaciers, which connect the ice sheet interior to its margin, responded to these orbitally-paced climate...

  14. Surface Exposure Geochronology Using Cosmogenic Nuclides: Applications in Antarctic Glacial Geology

    Science.gov (United States)

    1994-02-01

    in rocks, are particularly promising for directly dating 1 geological surfaces . In 1934, Grosse et al. first suggested that cosmic rays produce rare...and muons produced by cosmic ray irteractions in the atmosphere and in rocks, and spallation by I neutrons produced in muon capture reactions (Kurz...stable isotopes are useful for surface 3 exposure studies because they can act as integrators of cosmic ray exposure on long time scales, potentially up

  15. Accuracy of 9Be-data and its influence on 10Be cosmogenic nuclide data

    International Nuclear Information System (INIS)

    Merchel, S.; Schaefer, U.; Bremser, W.; Recknagel, S.; Bourles, D.L.; Leanni, L.; Czeslik, U.; Erzinger, J.; Kummer, N.A.; Merkel, B.

    2013-01-01

    A 9 Be-solution has been chemically prepared from phenakite (Be 2 SiO 4 ) mineral grains as commercial 9 Be-solutions are too high in long-lived 10 Be. The solution is intended to be used as a carrier for radiochemical separation of 10 Be to be measured by accelerator mass spectrometry (AMS). Thus, accurate data of the 9 Be-concentration of this solution is essential to guarantee for high-accuracy 10 Be data in the future. After devastating preliminary results (∼8 % standard deviation), eight laboratories finally produced twelve individual results by four different analytical methods. A certain lab and method bias might be identified by sophisticated statistical evaluation. Some laboratories also (grossly) underestimate their uncertainties. Thus, the simple weighted mean of this round-robin exercise needed to be corrected by introducing additional allowances (Paule-Mandel-approach). The final result has been calculated to (2,246 ± 11) μg 9 Be/(g solution) with a reasonably low weighted standard deviation of 0.49 %. The maximum deviation of a single lab value from the weighted mean is 2.4 % when removing one Grubbs outlier (11 % off from the mean) from the data set. As 10 Be-data, which is usually calculated from measured 10 Be/ 9 Be by AMS and stable 9 Be, cannot be more accurate than the determined 9 Be-concentration, it seems highly advisable to establish or improve quality assurance by having self-made carrier-solutions analysed at more than a single lab and regularly taking part in round-robin exercises. (author)

  16. Uptake of nuclides by plants

    International Nuclear Information System (INIS)

    Greger, Maria

    2004-04-01

    This review on plant uptake of elements has been prepared to demonstrate how plants take up different elements. The work discusses the nutrient elements, as well as the general uptake and translocation in plants, both via roots and by foliar absorption. Knowledge of the uptake by the various elements within the periodic system is then reviewed. The work also discusses transfer factors (TF) as well as difficulties using TF to understand the uptake by plants. The review also focuses on species differences. Knowledge necessary to understand and calculate plant influence on radionuclide recirculation in the environment is discussed, in which the plant uptake of a specific nuclide and the fate of that nuclide in the plant must be understood. Plants themselves determine the uptake, the soil/sediment determines the availability of the nuclides and the nuclides themselves can interact with each other, which also influences the uptake. Consequently, it is not possible to predict the nuclide uptake in plants by only analysing the nuclide concentration of the soil/substrate

  17. Uptake of nuclides by plants

    Energy Technology Data Exchange (ETDEWEB)

    Greger, Maria [Stockholm Univ. (Sweden). Dept. of Botany

    2004-04-01

    This review on plant uptake of elements has been prepared to demonstrate how plants take up different elements. The work discusses the nutrient elements, as well as the general uptake and translocation in plants, both via roots and by foliar absorption. Knowledge of the uptake by the various elements within the periodic system is then reviewed. The work also discusses transfer factors (TF) as well as difficulties using TF to understand the uptake by plants. The review also focuses on species differences. Knowledge necessary to understand and calculate plant influence on radionuclide recirculation in the environment is discussed, in which the plant uptake of a specific nuclide and the fate of that nuclide in the plant must be understood. Plants themselves determine the uptake, the soil/sediment determines the availability of the nuclides and the nuclides themselves can interact with each other, which also influences the uptake. Consequently, it is not possible to predict the nuclide uptake in plants by only analysing the nuclide concentration of the soil/substrate.

  18. Library correlation nuclide identification algorithm

    International Nuclear Information System (INIS)

    Russ, William R.

    2007-01-01

    A novel nuclide identification algorithm, Library Correlation Nuclide Identification (LibCorNID), is proposed. In addition to the spectrum, LibCorNID requires the standard energy, peak shape and peak efficiency calibrations. Input parameters include tolerances for some expected variations in the calibrations, a minimum relative nuclide peak area threshold, and a correlation threshold. Initially, the measured peak spectrum is obtained as the residual after baseline estimation via peak erosion, removing the continuum. Library nuclides are filtered by examining the possible nuclide peak areas in terms of the measured peak spectrum and applying the specified relative area threshold. Remaining candidates are used to create a set of theoretical peak spectra based on the calibrations and library entries. These candidate spectra are then simultaneously fit to the measured peak spectrum while also optimizing the calibrations within the bounds of the specified tolerances. Each candidate with optimized area still exceeding the area threshold undergoes a correlation test. The normalized Pearson's correlation value is calculated as a comparison of the optimized nuclide peak spectrum to the measured peak spectrum with the other optimized peak spectra subtracted. Those candidates with correlation values that exceed the specified threshold are identified and their optimized activities are output. An evaluation of LibCorNID was conducted to verify identification performance in terms of detection probability and false alarm rate. LibCorNID has been shown to perform well compared to standard peak-based analyses

  19. A proposal of comparative Maunder minimum cosmogenic isotope measurements

    International Nuclear Information System (INIS)

    Attolini, M.R.; Nanni, T.; Galli, M.; Povinec, P.

    1989-01-01

    There are at present contraddictory conclusions about solar activity and cosmogenic isotope production variation during Maunder Minimum. The interaction of solar wind with galactic cosmic rays, the dynamic behaviour of the Sun either as a system having an internal clock, and/or as a forced non linear system, are important aspects that can shed new light on solar physics, the Earth-Sun relationship and the climatic variation. An essential progress in the matter might be made by clarifying the cosmogenic isotope production during the mentioned interval. As it seems that during Maunder Minimum the Be10 production oscillates of about a factor of two, the authors have also to expect short scale enhanced variations in tree rings radiocarbon concentrations for the same interval. It is therefore highly desirable that for the same interval, that the authors would identify with 1640-1720 AD, detailed concentration measurements both of Be10 (in dated polar ice in addition to those of Beer et al.) and of tree ring radiocarbon, be made with cross-checking, in samples of different latitudes, longitudes and within short and large distance of the sea. The samples could be taken, as for example in samples from the central Mediterranean region, in the Baltic region and in other sites from central Europe and Asia

  20. Alpha-emitting nuclides in the marine environment

    Science.gov (United States)

    Pentreath, R. J.

    1984-06-01

    The occurrence of alpha-emitting nuclides and their daughter products in the marine environment continues to be a subject of study for many reasons. Those nuclides which occur naturally, in the uranium, thorium and actinium series, are of interest because of their value in determining the rates of geological and geochemical processes in the oceans. Studies of them address such problems as the determination of rates of transfer of particulate matter, deposition rates, bioturbation rates, and so on. Two of the natural alpha-series nuclides in which a different interest has been expressed are 210Po and 226Ra, because their concentrations in marine organisms are such that they contribute to a significant fraction of the background dose rates sustained both by the organisms themselves and by consumers of marine fish and shellfish. To this pool of naturally-occurring nuclides, human activities have added the transuranium nuclides, both from the atmospheric testing of nuclear devices and from the authorized discharges of radioactive wastes into coastal waters and the deep sea. Studies have therefore been made to understand the chemistry of these radionuclides in sea water, their association with sedimentary materials, and their accumulation by marine organisms, the last of these being of particular interest because the transuranics are essentially "novel" elements to the marine fauna and flora. The need to predict the long-term behaviour of these nuclides has, in turn, stimulated research on those naturally-occurring nuclides which may behave in a similar manner.

  1. Nuclide Importance and the Steady-State Burnup Equation

    International Nuclear Information System (INIS)

    Sekimoto, Hiroshi; Nemoto, Atsushi

    2000-01-01

    Conventional methods for evaluating some characteristic values of nuclides relating to burnup in a given neutron spectrum are reviewed in a mathematically systematic way, and a new method based on the importance theory is proposed. In this method, these characteristic values of a nuclide are equivalent to the importances of the nuclide. By solving the equation adjoint to the steady-state burnup equation with a properly chosen source term, the importances for all nuclides are obtained simultaneously.The fission number importance, net neutron importance, fission neutron importance, and absorbed neutron importance are evaluated and discussed. The net neutron importance is a measure directly estimating neutron economy, and it can be evaluated simply by calculating the fission neutron importance minus the absorbed neutron importance, where only the absorbed neutron importance depends on the fission product. The fission neutron importance and absorbed neutron importance are analyzed separately, and detailed discussions of the fission product effects are given for the absorbed neutron importance

  2. ZZ REAC-2, Nuclide Activation and Transmutation

    International Nuclear Information System (INIS)

    Mann, F.M.

    2002-01-01

    abundances, decay rates, dose rates, heating rates, etc. in a user-specified file format. SLIB converts one or more card-image format libraries into binary form for program use. Two auxiliary codes, LISTCRS and LISTDCY, are included to edit the cross section and decay binary data files, respectively. 2 - Method of solution: The spectrum-averaged cross section is obtained by collapsing the multigroup cross sections with the multigroup flux. The equations used assume that the cross sections are for a point in space and ignore the spatial transport of material and the time dependence of the cross sections. In order to provide a fast, stable solution to the transmutation equation, REAC2 lessens the couplings between nuclides implied by the transmutation equation. The code assumes that during any time period of arbitrary length (1) the flux is constant as a function of time, (2) no reaction occurs on a reaction product or a decay product, and (3) at most six decays can occur for a reaction product or the initial nuclide. Using these assumptions, REAC2 calculates exactly the resulting distribution of nuclides. Once the distribution is known, other quantities of interest such as the decay rate, dose rate, transmutations, etc. can be calculated from a linear combination of the nuclide amounts. 3 - Restrictions on the complexity of the problem: REAC2 is not optimized for problems where fission products are important

  3. Rapid increase in cosmogenic 14C in AD 775 measured in New Zealand kauri trees indicates short-lived increase in 14C production spanning both hemispheres

    Science.gov (United States)

    Güttler, D.; Adolphi, F.; Beer, J.; Bleicher, N.; Boswijk, G.; Christl, M.; Hogg, A.; Palmer, J.; Vockenhuber, C.; Wacker, L.; Wunder, J.

    2015-02-01

    In 2012, Miyake et al. reported a sudden and strong increase of the atmospheric radiocarbon (14C) content in Japanese cedar trees of 1.2% between AD 774 and 775. While their findings were quickly confirmed by a German oak chronology for the Northern Hemisphere (NH), the question remained if the effect was seen in both hemispheres. Here we present the first annually resolved Southern Hemisphere (SH) 14C record spanning the interval AD 760-787, using New Zealand kauri (Agathis australis) chronology wood. An almost identical distinct increase compared to Northern Hemisphere data was observed, suggesting a cosmic event with globally uniform impact as a potential cause for the increase. Deploying a carbon cycle box model a worldwide averaged net 14C production of 2.2 ×108 14C atoms cm-2 was estimated, which is 3.7 times higher than the average annual 14C production. The immediate appearance of the event in tree rings on both hemispheres suggests a short duration event of significantly less than 1 yr.

  4. Cosmogenic radionuclides. Theory and applications in the terrestrial and space environments

    International Nuclear Information System (INIS)

    Beer, Juerg; Steiger, Rudolf von; McCracken, Ken

    2012-01-01

    Cosmogenic radionuclides are radioactive isotopes which are produced by natural processes and distributed within the Earth system. With a holistic view of the environment the authors show in this book how cosmogenic radionuclides can be used to trace and to reconstruct the history of a large variety of processes. They discuss the way in which cosmogenic radionuclides can assist in the quantification of complex processes in the present-day environment. The book aims to demonstrate to the reader the strength of analytic tools based on cosmogenic radionuclides, their contribution to almost any field of modern science, and how these tools may assist in the solution of many present and future problems that we face here on Earth. The book provides a comprehensive discussion of the basic principles behind the applications of cosmogenic (and other) radionuclides as environmental tracers and dating tools. The second section of the book discusses in some detail the production of radionuclides by cosmic radiation, their transport and distribution in the atmosphere and the hydrosphere, their storage in natural archives, and how they are measured. The third section of the book presents a number of examples selected to illustrate typical tracer and dating applications in a number of different spheres (atmosphere, hydrosphere, geosphere, biosphere, solar physics and astronomy). At the same time the authors have outlined the limitations of the use of cosmogenic radionuclides. Written on a level understandable by graduate students without specialist skills in physics or mathematics, the book addresses a wide audience, ranging from archaeology, biophysics, and geophysics, to atmospheric physics, hydrology, astrophysics and space science.

  5. Cosmogenic radionuclides. Theory and applications in the terrestrial and space environments

    Energy Technology Data Exchange (ETDEWEB)

    Beer, Juerg [Eidgenoessische Anstalt fuer Wasserversorgung, Abwasserreinigung und Gewaesserschutz, Duebendorf (Switzerland); Steiger, Rudolf von [International Space Science Insitute, Bern (Switzerland); McCracken, Ken [Maryland Univ., College Park (United States). IPST

    2012-07-01

    Cosmogenic radionuclides are radioactive isotopes which are produced by natural processes and distributed within the Earth system. With a holistic view of the environment the authors show in this book how cosmogenic radionuclides can be used to trace and to reconstruct the history of a large variety of processes. They discuss the way in which cosmogenic radionuclides can assist in the quantification of complex processes in the present-day environment. The book aims to demonstrate to the reader the strength of analytic tools based on cosmogenic radionuclides, their contribution to almost any field of modern science, and how these tools may assist in the solution of many present and future problems that we face here on Earth. The book provides a comprehensive discussion of the basic principles behind the applications of cosmogenic (and other) radionuclides as environmental tracers and dating tools. The second section of the book discusses in some detail the production of radionuclides by cosmic radiation, their transport and distribution in the atmosphere and the hydrosphere, their storage in natural archives, and how they are measured. The third section of the book presents a number of examples selected to illustrate typical tracer and dating applications in a number of different spheres (atmosphere, hydrosphere, geosphere, biosphere, solar physics and astronomy). At the same time the authors have outlined the limitations of the use of cosmogenic radionuclides. Written on a level understandable by graduate students without specialist skills in physics or mathematics, the book addresses a wide audience, ranging from archaeology, biophysics, and geophysics, to atmospheric physics, hydrology, astrophysics and space science.

  6. Apparatus for eliminating electrodeposition of radioactive nuclide

    International Nuclear Information System (INIS)

    Inomata, Ichiro; Ishibe, Tadao; Matsunaga, Masaaki; Konuki, Ryoichi; Suzuki, Kazunori; Watanabe, Minoru; Tomoshige, Shozo; Kondo, Kozo.

    1990-01-01

    In a conventional device for eliminating by radioactive nuclides electrodeposition, a liquid containing radioactive nuclides is electrolyzed under a presence of non-radioactive heavy metals and removing radioactive nuclides by electrodepositing them together with the heavy metals. Two anode plates are opposed in an electrolysis vessel of this device. A plurality (4 to 6) of cathode plates are arranged between the anodes in parallel with them and the cathode surfaces opposed to the anodes are insulated. Further, such a plurality of cathode plates are grouped into respective units. Alternatively, the anode plate is made of platinum-plated titanium material and the cathode plate is made of stainless steel. In the thus constituted electrodeposition eliminating device, since the cathode surface directed to the anodes on both ends are insulated, all of electric current from the anode reach the core cathode after flowing around the cathodes at both ends. As a result, there is no substantial difference in the flowing length of the electrolyzing current to each of the cathodes and these is neither difference in the electrodeposition amount. The electrodeposited products are adhered uniformly and densely to the electrodes and, simultaneously, Co-60 and Mn-54, etc. are also electrodeposited. (I.S.)

  7. Cosmogenic neutron production at Daya Bay

    Science.gov (United States)

    An, F. P.; Balantekin, A. B.; Band, H. R.; Bishai, M.; Blyth, S.; Cao, D.; Cao, G. F.; Cao, J.; Chan, Y. L.; Chang, J. F.; Chang, Y.; Chen, H. S.; Chen, S. M.; Chen, Y.; Chen, Y. X.; Cheng, J.; Cheng, Z. K.; Cherwinka, J. J.; Chu, M. C.; Chukanov, A.; Cummings, J. P.; Ding, Y. Y.; Diwan, M. V.; Dolgareva, M.; Dove, J.; Dwyer, D. A.; Edwards, W. R.; Gill, R.; Gonchar, M.; Gong, G. H.; Gong, H.; Grassi, M.; Gu, W. Q.; Guo, L.; Guo, X. H.; Guo, Y. H.; Guo, Z.; Hackenburg, R. W.; Hans, S.; He, M.; Heeger, K. M.; Heng, Y. K.; Higuera, A.; Hsiung, Y. B.; Hu, B. Z.; Hu, T.; Huang, H. X.; Huang, X. T.; Huang, Y. B.; Huber, P.; Huo, W.; Hussain, G.; Jaffe, D. E.; Jen, K. L.; Ji, X. L.; Ji, X. P.; Jiao, J. B.; Johnson, R. A.; Jones, D.; Kang, L.; Kettell, S. H.; Khan, A.; Koerner, L. W.; Kohn, S.; Kramer, M.; Kwok, M. W.; Langford, T. J.; Lau, K.; Lebanowski, L.; Lee, J.; Lee, J. H. C.; Lei, R. T.; Leitner, R.; Leung, J. K. C.; Li, C.; Li, D. J.; Li, F.; Li, G. S.; Li, Q. J.; Li, S.; Li, S. C.; Li, W. D.; Li, X. N.; Li, X. Q.; Li, Y. F.; Li, Z. B.; Liang, H.; Lin, C. J.; Lin, G. L.; Lin, S.; Lin, S. K.; Lin, Y.-C.; Ling, J. J.; Link, J. M.; Littenberg, L.; Littlejohn, B. R.; Liu, J. C.; Liu, J. L.; Loh, C. W.; Lu, C.; Lu, H. Q.; Lu, J. S.; Luk, K. B.; Ma, X. B.; Ma, X. Y.; Ma, Y. Q.; Malyshkin, Y.; Martinez Caicedo, D. A.; McDonald, K. T.; McKeown, R. D.; Mitchell, I.; Nakajima, Y.; Napolitano, J.; Naumov, D.; Naumova, E.; Ochoa-Ricoux, J. P.; Olshevskiy, A.; Pan, H.-R.; Park, J.; Patton, S.; Pec, V.; Peng, J. C.; Pinsky, L.; Pun, C. S. J.; Qi, F. Z.; Qi, M.; Qian, X.; Qiu, R. M.; Raper, N.; Ren, J.; Rosero, R.; Roskovec, B.; Ruan, X. C.; Steiner, H.; Sun, J. L.; Tang, W.; Taychenachev, D.; Treskov, K.; Tsang, K. V.; Tse, W.-H.; Tull, C. E.; Viaux, N.; Viren, B.; Vorobel, V.; Wang, C. H.; Wang, M.; Wang, N. Y.; Wang, R. G.; Wang, W.; Wang, X.; Wang, Y. F.; Wang, Z.; Wang, Z.; Wang, Z. M.; Wei, H. Y.; Wen, L. J.; Whisnant, K.; White, C. G.; Wise, T.; Wong, H. L. H.; Wong, S. C. F.; Worcester, E.; Wu, C.-H.; Wu, Q.; Wu, W. J.; Xia, D. M.; Xia, J. K.; Xing, Z. Z.; Xu, J. L.; Xu, Y.; Xue, T.; Yang, C. G.; Yang, H.; Yang, L.; Yang, M. S.; Yang, M. T.; Yang, Y. Z.; Ye, M.; Ye, Z.; Yeh, M.; Young, B. L.; Yu, Z. Y.; Zeng, S.; Zhan, L.; Zhang, C.; Zhang, C. C.; Zhang, H. H.; Zhang, J. W.; Zhang, Q. M.; Zhang, R.; Zhang, X. T.; Zhang, Y. M.; Zhang, Y. M.; Zhang, Y. X.; Zhang, Z. J.; Zhang, Z. P.; Zhang, Z. Y.; Zhao, J.; Zhou, L.; Zhuang, H. L.; Zou, J. H.; Daya Bay Collaboration

    2018-03-01

    Neutrons produced by cosmic ray muons are an important background for underground experiments studying neutrino oscillations, neutrinoless double beta decay, dark matter, and other rare-event signals. A measurement of the neutron yield in the three different experimental halls of the Daya Bay Reactor Neutrino Experiment at varying depth is reported. The neutron yield in Daya Bay's liquid scintillator is measured to be Yn=(10.26 ±0.86 )×10-5 , (10.22 ±0.87 )×10-5 , and (17.03 ±1.22 )×10-5 μ-1 g-1 cm2 at depths of 250, 265, and 860 meters-water-equivalent. These results are compared to other measurements and the simulated neutron yield in Fluka and Geant4. A global fit including the Daya Bay measurements yields a power law coefficient of 0.77 ±0.03 for the dependence of the neutron yield on muon energy.

  8. The nuclide inventory in SFR-1

    International Nuclear Information System (INIS)

    Ingemansson, Tor

    2001-10-01

    This report is an account for a project carried out on behalf of the Swedish Radiation Protection Authority (SSI): 'Nuclide inventory in SFR-1' (The Swedish underground disposal facility for low and intermediate level reactor waste). The project comprises the following five sub-projects: 1) Measuring methods for nuclides, difficult to measure, 2) The nuclide inventory in SFR-1, 3) Proposal for nuclide library for SFR-1 and ground disposal, 4) Nuclide library for exemption, and 5) Characterising of the nuclide inventory and documentation for SFL waste. In all five sub-projects long-lived activity, including Cl-36, has been considered

  9. Nuclides for radiotherapy: an overview

    International Nuclear Information System (INIS)

    Andres, R.Y.; Blattmann, H.

    1986-02-01

    With the emergence of new, biological vehicles of great organ specificity (e.g. steroid hormones, antibodies) the concept of systemic tumor therapy with the aid of radiotherapeutica has gained new momentum. In order to assess the options open for optimal adaptation of the radiation properties to the pharmacocinetics of a vehicle, a search was done to identify potentially useful therapeutic radionuclides. Main criteria for selection were half life, low gamma-yield and stable daughter nuclide. The resulting possibilities fall into 4 categories: 1) alpha-emitters (At-211); 2) beta/sup -/-emitters that can be prepared in a carrierfree fashion (P-32, S-35, As-77, Y-90, Ag-111, Pm-149, Tb-161, Lu-177), 3) beta/sup -/-emitters with carrier added (Pd-109, Pr-142, Gd-159, Er-169, Tm-172, Yb-175, Re-188, Ir-194, Pt-197) and 4) electron capture nuclides, emitting Auger-cascades (Cr-51, Ga-67, Ge-71, Br-77, Ru-97, Sb-119, I-123, Cs-129, Nd-140, Er-165, Ta-177, Hg-197, Tl-201). Among the 4th group some well known, diagnostically used nuclides are found. Their therapeutic use necessitates the precise localisation in or very near the genetic material of the cell to be killed; only there the destructive power of the very short range Auger-electrons can be used. For each of the selected nuclides a summary of decay data, possibilities of preparation and chemical reactivity for labelling of vehicles is given. (author)

  10. New cosmogenic burial ages for Sterkfontein Member 2 Australopithecus and Member 5 Oldowan

    Science.gov (United States)

    Granger, Darryl E.; Gibbon, Ryan J.; Kuman, Kathleen; Clarke, Ronald J.; Bruxelles, Laurent; Caffee, Marc W.

    2015-06-01

    The cave infills at Sterkfontein contain one of the richest assemblages of Australopithecus fossils in the world, including the nearly complete skeleton StW 573 (`Little Foot') in its lower section, as well as early stone tools in higher sections. However, the chronology of the site remains controversial owing to the complex history of cave infilling. Much of the existing chronology based on uranium-lead dating and palaeomagnetic stratigraphy has recently been called into question by the recognition that dated flowstones fill cavities formed within previously cemented breccias and therefore do not form a stratigraphic sequence. Earlier dating with cosmogenic nuclides suffered a high degree of uncertainty and has been questioned on grounds of sediment reworking. Here we use isochron burial dating with cosmogenic aluminium-26 and beryllium-10 to show that the breccia containing StW 573 did not undergo significant reworking, and that it was deposited 3.67 +/- 0.16 million years ago, far earlier than the 2.2 million year flowstones found within it. The skeleton is thus coeval with early Australopithecus afarensis in eastern Africa. We also date the earliest stone tools at Sterkfontein to 2.18 +/- 0.21 million years ago, placing them in the Oldowan at a time similar to that found elsewhere in South Africa at Swartkans and Wonderwerk.

  11. Estimation of groundwater residence time and evaluation of geomorphological processes using cosmogenic and terrigenic radionuclides and isotopes of noble gases

    International Nuclear Information System (INIS)

    Mahara, Yasunori; Ohta, Tomoko; Igarashi, Toshifumi

    2013-01-01

    In this paper, the estimation of groundwater residence time and geomorphological changing processes are discussed by focusing on isotopes of noble gases and radionuclides with a long half-life as an environmental tracer. Noble gases and radionuclides are produced in the atmospheric air and terrestrial rocks by spallation and various muon reactions during cosmic rays irradiation. Groundwater dating and geomorphological changing are estimated from changes in the number of atoms of cosmogenic and terrigenic nuclides in groundwater and terrestrial rock. The main tools of groundwater dating are combination of the dissolved helium and tritium (half-life T 1/2 =12.3 y) for younger groundwater less than 60 years of residence time, and of the dissolved helium and 36 Cl (T 1/2 =3.01 x 10 5 y) for older groundwater over million years. On the other hand, the main tools on the geomorphological changes are the estimation of exposure time using cosmogenic radionuclides ( 10 Be(half-life T 1/2 =1.6 x 10 6 y), 14 C (T 1/2 =5730 y), 26 Al (T 1/2 =7.16 x 10 5 y) and 36 Cl) and cosmogenic stable noble gases ( 3 He and 21 Ne) produced in rock. (author)

  12. Karlsruhe nuclide chart - new 9. edition 2015

    Energy Technology Data Exchange (ETDEWEB)

    Soti, Zsolt [European Commission, Joint Research Centre (JRC), Institute for Transuranium Elements (ITU), Postfach 2340, DE-76125 Karlsruhe, (Germany); Magill, Joseph; Pfennig, Gerda; Derher, Raymond [Nucleonica GmbH, c/o European Commission, Postfach 2340, DE-76125 Karlsruhe, (Germany)

    2015-07-01

    Following the success of the 8. Edition of the Karlsruhe Nuclide Chart 2012, a new edition is planned for 2015. Since the 2012 edition, more than 100 nuclides have been discovered and about 1400 nuclides have been updated. In summary, the new 9. edition contains decay and radiation data on approximately 3230 ground state nuclides and 740 isomers from 118 chemical elements. The accompanying booklet provides a detailed explanation of the nuclide box structure used in the Chart. An expanded section contains many additional nuclide decay schemes to aid the user to interpret the highly condensed information in the nuclide boxes. The booklet contains - in addition to the latest values of the physical constants and physical properties - a periodic table of the elements, tables of new and updated nuclides, and a difference chart showing the main changes in the Chart graphically. (authors)

  13. Karlsruhe nuclide chart - new 9. edition 2015

    International Nuclear Information System (INIS)

    Soti, Zsolt; Magill, Joseph; Pfennig, Gerda; Derher, Raymond

    2015-01-01

    Following the success of the 8. Edition of the Karlsruhe Nuclide Chart 2012, a new edition is planned for 2015. Since the 2012 edition, more than 100 nuclides have been discovered and about 1400 nuclides have been updated. In summary, the new 9. edition contains decay and radiation data on approximately 3230 ground state nuclides and 740 isomers from 118 chemical elements. The accompanying booklet provides a detailed explanation of the nuclide box structure used in the Chart. An expanded section contains many additional nuclide decay schemes to aid the user to interpret the highly condensed information in the nuclide boxes. The booklet contains - in addition to the latest values of the physical constants and physical properties - a periodic table of the elements, tables of new and updated nuclides, and a difference chart showing the main changes in the Chart graphically. (authors)

  14. International chart of the nuclides. 2001

    International Nuclear Information System (INIS)

    Golashvili, T.V.; Kupriyanov, V.M.; Lbov, A.A.

    2002-01-01

    The International Chart of Nuclides - 2001 has been developed taking into account the data obtained in 1998-2001. Unlike widespread nuclide charts the present Chart of Nuclides contains EVALUATED values of the main characteristics. These values are supplied with the standard deviations. (author)

  15. Distribution of cosmogenic 7Be in environmental matrices around Kudankulam

    International Nuclear Information System (INIS)

    Selvi, B.S.; George, Thomas; Vijayakumar, B.; Ravi, P.M.

    2014-01-01

    7 Be is a naturally occurring cosmogenic radionuclide produced in the atmosphere through the spallation of nitrogen and oxygen nuclei by cosmic ray produced neutrons and protons. Due to its continuous production in the atmosphere, its relatively short half-life (53.3 days), and its ease of measurement by gamma spectrometry, 7 Be has proven to be a useful tool for tracing and quantifying environmental processes such as atmospheric deposition, atmospheric transport and soil erosion etc. Therefore a systematic study is undertaken to estimate the concentration of 7 Be in different environmental compartments around Kudankulam Nuclear Power Project site. This study discusses the results of the concentration of 7 Be obtained in surface air, dry deposition, rain water and some plant species around Kudankulam Nuclear Power Plant

  16. The determination of critical nuclides in PWR waste streams

    International Nuclear Information System (INIS)

    Centner, B.

    1993-01-01

    A current method for the determination of critical nuclides in the waste streams produced by a nuclear power reactor consists in applying correlation factors or scaling factors between those critical nuclides and so called key radionuclides, which can be easily measured and are representatives for the occurrence of activation products (Co-60) and fission products (Cs-137) in the waste streams. BELGATOM (BA) has developed a code (low level waste Activity Assessment-LLWAA code). The use of the code can clarify the analytical technique lower detection level that has to be achieved for each critical nuclide, in order to accurately measure it's activity in the different types of waste. (1 tab., 1 fig.)

  17. Accelerator produced nuclides for use in biology and medicine. A bibliography: January 1974--June 1976

    International Nuclear Information System (INIS)

    Karlstrom, K.I.; Christman, D.R.

    1978-01-01

    This bibliography (Volume II) follows the format of the first bibliography. Nuclides used therapeutically have not been included. References to medical application of the various nuclides of iodine, gallium, and indium have been excluded as being beyond the scope of this bibliography (and to keep its size to manageable proportions). For nuclides having fifteen or fewer references there is no breakdown into subcategories. For the others they have been subdivided as follows: (1) Production methods, (2) Compound syntheses, and (3) Medical uses. The first part of the bibliography contains references of general interest of various types. Where specific nuclides are involved, these references are also cross-indexed to each nuclide. The original reference number is always used for cross-indexing. The nuclide section is arranged in alphabetical order, and within each section alphabetically by first author. The author index lists each reference once for each author, with no indication of cross-referencing given

  18. Cosmogenically-produced isotopes in natural and enriched high-purity germanium detectors for the MAJORANA DEMONSTRATOR

    Science.gov (United States)

    Gilliss, Thomas; MAJORANA DEMONSTRATOR Collaboration

    2017-01-01

    The MAJORANA DEMONSTRATOR advances toward measurements of the neutrinoless double-beta decay of 76Ge. Detectors employed in the DEMONSTRATOR are subject to cosmogenic spallation during production and processing, resulting in activation of certain long-lived radioisotopes. Activation of these cosmogenic isotopes is mitigated by shielded storage of detectors and through underground operation of the DEMONSTRATOR at the 4850 ft level of the Sanford Underground Research Facility. In this work, we explore the appearance and reduction of cosmogenic contributions to the DEMONSTRATOR background spectrum. This work is supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, the Particle Astrophysics and Nuclear Physics Programs of the National Science Foundation, and the Sanford Underground Research Facility.

  19. Survey on Cosmogenic 26Al in Lewis Cliff Meteorites

    Science.gov (United States)

    Welten, K. C.; Alderliesten, C.; Lindner, L.

    1992-07-01

    levels of 56 +- 7 and 60 +- 7 for H and L chondrites, respectively [3], range up to 800 ka with an average of about 290 ka. Altogether this may indicate that the Lewis Cliff blue-ice region is a relatively old meteorite stranding area. This is supported by preliminary conclusions based on ^36Cl, measured in 8 Lewis Cliff meteorites [4]. However, it is likely that some of our terrestrial ages have been overestimated due to (i) lower ^26Al saturation values for meteorites with preatmospheric radii less than 20 cm [3] and (ii) low exposure ages, resulting in initial ^26Al levels below 90-95% of the saturation level. These effects make individual terrestrial age determinations solely based on ^26Al content speculative as long as additional cosmogenic nuclide data are lacking. Dramatic changes in the overall picture are not expected, because (i) we have measured relatively large samples with an average recovered weight of about 500 g (one 11-kg sample excluded) and (ii) anomalously low exposure ages occur in about only 5% of the cases [5,6]. Possible correlations between terrestrial age and place of find will be discussed. UNUSUAL EXPOSURE HISTORIES: We excluded samples with extremely low NTL (financial support from the "Nederlandse Organisatie voor Wetenschappelijk Onderzoek" (NWO). References: 1. Komura K. et al. (1982) Mem. NIPR Spec. Issue 25, 178-187; 2. Evans J.C. and Reeves J.H. (1987) EPSL 82, 223-230; 3. Vogt S. (1990) LPI Tech. Rpt. 90-05, 112-118; 4. Nishizumi K. et al. (1991) Meteoritics 26 (abs.), 380; 5. Graf Th. and Marti K. (1990) Lunar Planet. Sci. XXI, 431-432; 6. Schultz L., Weber H.W. and Begemann F. (1991) GCA 55, 59-66; 7. Benoit P.H. et al. (1990) Ant. J. of the U.S. 25 (Rev.), 47-49.

  20. Nuclide inventories of spent fuels from light water reactors

    International Nuclear Information System (INIS)

    Okumura, Keisuke; Okamoto, Tsutomu

    2012-02-01

    Accurate information on nuclide inventories of spent fuels from Light Water Reactors (LWRs) is important for evaluations of criticality, decay heat, radioactivity, toxicity, and so on, in the safety assessments of storage, transportation, reprocessing and waste disposal of the spent fuels. So, a lot of lattice burn-up calculations were carried out for the possible fuel specifications and irradiation conditions in Japanese commercial LWRs by using the latest nuclear data library JENDL-4.0 and a sophisticated lattice burn-up calculation code MOSRA-SRAC. As a result, burn-up changes of nuclide inventories and their possible ranges were clarified for 21 heavy nuclides and 118 fission products, which are important from the viewpoint of impacts to nuclear characteristics and nuclear fuel cycle and environment. (author)

  1. Cosmic-ray produced nuclides in ground level air and in precipitation

    Energy Technology Data Exchange (ETDEWEB)

    Schumann, G.; Roedel, W.; Stoeppler, M.

    1963-11-15

    There are mainly three kinds of radioactive substances in the atmosphere: emanations from the ground and their daughters, nuclides produced in the atmosphere by cosmic rays, and artificial products originating from nuclear weapon tests (and in a very small amount from other nuclear technical applications). This paper deals in particular with some of the cosmic-ray produced nuclides.

  2. FISPIN - a computer code for nuclide inventory calculations

    International Nuclear Information System (INIS)

    Burstall, R.F.

    1979-10-01

    The code is used for assessment of three groups of nuclides, the actinides, the fission products, and structural materials. The methods of calculation are described, together with the input and output of the code and examples of both. Recommendations are given for the best use of the code. (author)

  3. Method for the transmutation of nuclides

    International Nuclear Information System (INIS)

    1984-01-01

    The invention relates to a method for the systematic and optimal manufacture of nuclides with beneficial properties as well as for the transmutation of noxious nuclides into innocuous ones, e.g. radioactive wastes. For that purpose, use is made of the periodic system of atoms and of the so-called twin-subshell model of nuclear structure, in order to trace the possible transformations of the nuclide through irradiation with appropriate particles or radiation. (G.J.P.)

  4. Modelling indoor exposure to natural radioactive nuclides

    International Nuclear Information System (INIS)

    Hofmann, W.; Daschil, F.

    1986-01-01

    Radon enters buildings from several sources primarily from building materials and from the soil or rocks that underlie or surround building fundaments. A multicompartment model was developed which describes the fate of radon and attached or free radon decay products in a model room by a set of linear time-dependent differential equations. Time-dependent coefficients allow to model temporal parameter changes, e.g. the opening of windows, or a sudden pressure drop leading to enhanced exhalation. While steady-state models were used to study the effect of parameter changes on steady state nuclide concentrations, the time-dependent models provided additional information on the time scale of these changes. (author)

  5. Cross sections for nuclide production in proton- and deuteron-induced reactions on 93Nb measured using the inverse kinematics method

    Directory of Open Access Journals (Sweden)

    Nakano Keita

    2017-01-01

    Full Text Available Isotopic production cross sections were measured for proton- and deuteron-induced reactions on 93Nb by means of the inverse kinematics method at RIKEN Radioactive Isotope Beam Factory. The measured production cross sections of residual nuclei in the reaction 93Nb + p at 113 MeV/u were compared with previous data measured by the conventional activation method in the proton energy range between 46 and 249 MeV. The present inverse kinematics data of four reaction products (90Mo, 90Nb, 88Y, and 86Y were in good agreement with the data of activation measurement. Also, the model calculations with PHITS describing the intra-nuclear cascade and evaporation processes generally well reproduced the measured isotopic production cross sections.

  6. Terrestrial cosmogenic 3He: where are we 30 years after its discovery?

    Science.gov (United States)

    Blard, Pierre-Henri; Pik, Raphaël; Farley, Kenneth A.; Lavé, Jérôme; Marrocchi, Yves

    2016-04-01

    It is now 30 years since cosmogenic 3He has been detected for the first time in a terrestrial sample (Kurz, 1986). 3He is now a widely used geochemical tool in many fields of Earth sciences: volcanology, tectonics, paleoclimatology. 3He has the advantage to have a high "production rate" to "detection limit" ratio, allowing surfaces as young as hundred of years to be dated. Although its nuclear stability implies several limitations, it moreover represents a useful alternative to 10Be in mafic environments. This contribution is a review of the progresses that have been accomplished since this discovery, and discuss strategies to improve both the accuracy and the precision of this geochronometer. 1) Measurement of cosmogenic 3He Correction of magmatic 3He. To estimate the non-cosmogenic magmatic 3He, Kurz (1986) invented a two steps method involving crushing of phenocrysts (to analyze the isotopic ratio of the magmatic component), followed by a subsequent melting of the sample, to extract the remaining components, including the cosmogenic 3He: 3Hec = 3Hemelt -4Hemelt x (3He/4He)magmatic (1) Several studies suggested that the preliminary crushing may induce a loss of cosmogenic 3He (Hilton et al., 1993; Yokochi et al., 2005; Blard et al., 2006), implying an underestimate of the cosmogenic 3He measurement. However, subsequent work did not replicate these observations (Blard et al., 2008; Goerhing et al., 2010), suggesting an influence of the used apparatus. An isochron method (by directly melting several phenocrysts aliquots) is an alternative to avoid the preliminary crushing step (Blard and Pik, 2008). Atmospheric contamination. Protin et al. (in press) provides robust evidences for a large and irreversible contamination of atmospheric helium on silicate surfaces. This unexpected behavior may reconcile the contrasted observations about the amplitude of crushing loss. This undesirable atmospheric contamination is negligible if grain fractions smaller than 150 mm are

  7. Reconstruction and measurement of cosmogenic signals in the neutrino experiment Borexino

    International Nuclear Information System (INIS)

    Meindl, Johannes Quirin

    2013-01-01

    Underground laboratories around the globe provide low-count rate experiments with the necessary shielding against the large flux of cosmic muons present at the Earth's surface. Depending on the depth of the underground site, the muon flux is reduced by up to eight orders of magnitude. Hower, the residual muons, and the neutrons and radioisotopes they produce in nuclear spallation processes, still pose a significant background for many of these experiments. This thesis focusses on cosmogenic background signals in the neutrino experiment Borexino, which is located at the Laboratori Nazionali del Gran Sasso underground site at a depth of 3800 meters of water equivalent. The work encompasses the identification, spatial reconstruction, and measurement of rates and production yields of these cosmogenic events. For the efficient tagging of long-lived cosmogenic radioisotopes of lifetimes in the order of seconds and longer, the spatial reconstruction of the parent muon is essential. Based on the characteristic light emission profile of muons crossing the inner detector of Borexino, a new muon track reconstruction algorithm was developed. Furthermore, to increase the performance of the existing muon track reconstruction of Borexino's outer detector, a routine was programmed to automatically calibrate the photomultiplier tubes in timing and charge response. Muons entering the experiment can cause fast secondary signals from decays and captures of stopped muons, and the captures of muon-induced neutrons. To identify these events in the high noise environment after the muon, dedicated search algorithms were developed. Based on the detected signals, these fast muon-correlated events are studied. The fraction and lifetime of stopped muons are found to be in agreement with expectations. The production yield of cosmogenic neutrons is measured to (3.10±0.07 stat ±0.08 syst ) . 10 -4 n/(μ . (g/cm 2 )). The corresponding capture time in the Borexino scintillator pseudocumene is

  8. Reconstruction and measurement of cosmogenic signals in the neutrino experiment Borexino

    Energy Technology Data Exchange (ETDEWEB)

    Meindl, Johannes Quirin

    2013-06-14

    Underground laboratories around the globe provide low-count rate experiments with the necessary shielding against the large flux of cosmic muons present at the Earth's surface. Depending on the depth of the underground site, the muon flux is reduced by up to eight orders of magnitude. Hower, the residual muons, and the neutrons and radioisotopes they produce in nuclear spallation processes, still pose a significant background for many of these experiments. This thesis focusses on cosmogenic background signals in the neutrino experiment Borexino, which is located at the Laboratori Nazionali del Gran Sasso underground site at a depth of 3800 meters of water equivalent. The work encompasses the identification, spatial reconstruction, and measurement of rates and production yields of these cosmogenic events. For the efficient tagging of long-lived cosmogenic radioisotopes of lifetimes in the order of seconds and longer, the spatial reconstruction of the parent muon is essential. Based on the characteristic light emission profile of muons crossing the inner detector of Borexino, a new muon track reconstruction algorithm was developed. Furthermore, to increase the performance of the existing muon track reconstruction of Borexino's outer detector, a routine was programmed to automatically calibrate the photomultiplier tubes in timing and charge response. Muons entering the experiment can cause fast secondary signals from decays and captures of stopped muons, and the captures of muon-induced neutrons. To identify these events in the high noise environment after the muon, dedicated search algorithms were developed. Based on the detected signals, these fast muon-correlated events are studied. The fraction and lifetime of stopped muons are found to be in agreement with expectations. The production yield of cosmogenic neutrons is measured to (3.10{+-}0.07{sub stat}{+-}0.08{sub syst}) . 10{sup -4} n/({mu} . (g/cm{sup 2})). The corresponding capture time in the

  9. State-of-the-art of NORM nuclide determination in samples from oil and gas production : Validation of potential standardization methods through an interlaboratory test programme

    NARCIS (Netherlands)

    Knaepen, WAI; Bergwerf, W; Lancee, PJF; vanDijk, W; Jansen, JFW; Janssen, RGC; Kiezenberg, WHT; vanSluijs, R; Tijsmans, MH; Voors, PI

    1995-01-01

    Gas and oil companies frequently encounter build-up of Naturally Occurring Radioactive Material (NORM) in their production and processing facilities. In the Netherlands NORM is subject to strict national regulations and, consequently, installations have to be screened on a regular basis. The

  10. Cosmogenic 10Be and 26Al exposure ages of tors and erratics, Cairngorm Mountains, Scotland: Timescales for the development of a classic landscape of selective linear glacial erosion

    Science.gov (United States)

    Phillips, W.M.; Hall, A.M.; Mottram, R.; Fifield, L.K.; Sugden, D.E.

    2006-01-01

    The occurrence of tors within glaciated regions has been widely cited as evidence for the preservation of relic pre-Quaternary landscapes beneath protective covers of non-erosive dry-based ice. Here, we test for the preservation of pre-Quaternary landscapes with cosmogenic surface exposure dating of tors. Numerous granite tors are present on summit plateaus in the Cairngorm Mountains of Scotland where they were covered by local ice caps many times during the Pleistocene. Cosmogenic 10Be and 26Al data together with geomorphic relationships reveal that these landforms are more dynamic and younger than previously suspected. Many Cairngorm tors have been bulldozed and toppled along horizontal joints by ice motion, leaving event surfaces on tor remnants and erratics that can be dated with cosmogenic nuclides. As the surfaces have been subject to episodic burial by ice, an exposure model based upon ice and marine sediment core proxies for local glacial cover is necessary to interpret the cosmogenic nuclide data. Exposure ages and weathering characteristics of tors are closely correlated. Glacially modified tors and boulder erratics with slightly weathered surfaces have 10Be exposure ages of about 15 to 43 ka. Nuclide inheritance is present in many of these surfaces. Correction for inheritance indicates that the eastern Cairngorms were deglaciated at 15.6 ?? 0.9 ka. Glacially modified tors with moderate to advanced weathering features have 10Be exposure ages of 19 to 92 ka. These surfaces were only slightly modified during the last glacial cycle and gained much of their exposure during the interstadial of marine Oxygen Isotope Stage 5 or earlier. Tors lacking evidence of glacial modification and exhibiting advanced weathering have 10Be exposure ages between 52 and 297 ka. Nuclide concentrations in these surfaces are probably controlled by bedrock erosion rates instead of discrete glacial events. Maximum erosion rates estimated from 10Be range from 2.8 to 12.0 mm/ka, with

  11. Interim report on research between Oak Ridge National Laboratory and Japan Nuclear Cycle Development Institute on neutron-capture cross sections by long-lived fission product nuclides

    International Nuclear Information System (INIS)

    Furutaka, Kazuyoshi; Nakamura, Shoji; Harada, Hideo

    2004-03-01

    Neutron capture cross sections of long-lived fission products (LLFP) are important quantities as fundamental data for the study of nuclear transmutation of radioactive wastes. Previously obtained thermal-neutron capture gamma-ray data were analyzed to deduce the partial neutron-capture cross sections of LLFPs including 99 Tc, 93 Zr, and 107 Pd for thermal neutrons. By comparing the decay gamma-ray data and prompt gamma-ray data for 99 Tc, the relation between the neutron-capture cross section deduced by the two different methods was studied. For the isotopes 93 Zr and 107 Pd, thermal neutron-capture gamma-ray production cross sections were deduced for the first time. The level schemes of 99 Tc, 93 Zr, and 107 Pd have also been constructed form the analyzed data and compared with previously reported levels. This work has been done under the cooperative program 'Neutron Capture Cross Sections of Long-Lived Fission products (LLFPs)' by Japan Nuclear Cycle Development Institute (JNC) and Oak Ridge National Laboratory (ORNL). (author)

  12. Rapid screening of natually occurring radioactive nuclides({sup 2}'3{sup 8}U, {sup 232}Th) in raw materials and by-products samples using XRF

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ji Young; Lim, Chung Sup [Radiation Biotechnology and Applied Radioiostope Science, University of Science and Technology, Daejeon (Korea, Republic of); Lim, Jong Myoung; Ji, Young Yong; Chung, Kun Ho; Lee, Wan No; Kang, Mun Ja [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Jang, Byung Uck [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2016-12-15

    As new legislation has come into force implementing radiation safety management for the use of naturally occurring radioactive materials (NORM), it is necessary to establish a rapid and accurate measurement technique. Measurement of {sup 238}U and {sup 232}Th using conventional methods encounter the most significant difficulties for pretreatment (e.g., purification, speciation, and dilution/enrichment) or require time-consuming processes. Therefore, in this study, the applicability of ED-XRF as a non-destructive and rapid screening method was validated for raw materials and by-product samples. A series of experiments was conducted to test the applicability for rapid screening of XRF measurement to determine activity of {sup 238}U and {sup 23{sup 2}}Th based on certified reference materials (e.g., soil, rock, phosphorus rock, bauxite, zircon, and coal ash) and NORM samples commercially used in Korea. Statistical methods were used to compare the analytical results of ED-XRF to those of certified values of certified reference materials (CRM) and inductively coupled plasma mass spectrometry (ICP-MS). Results of the XRF measurement for {sup 238}U and {sup 232}Th showed under 20% relative error and standard deviation. The results of the U-test were statistically significant except for the case of U in coal fly ash samples. In addition, analytical results of {sup 238}U and {sup 232}Th in the raw material and by-product samples using XRF and the analytical results of those using ICP-MS (R{sup 2}≥0.95) were consistent with each other. Thus, the analytical results rapidly derived using ED-XRF were fairly reliable. Based on the validation results, it can be concluded that the ED-XRF analysis may be applied to rapid screening of radioactivities ({sup 238}U and {sup 232}Th) in NORM samples.

  13. Instant release of fission products in leaching experiments with high burn-up nuclear fuels in the framework of the Euratom project FIRST- Nuclides

    Energy Technology Data Exchange (ETDEWEB)

    Lemmens, K., E-mail: klemmens@sckcen.be [Waste and Disposal Expert Group, Belgian Nuclear Research Centre (SCK-CEN), Boeretang 200, 2400 Mol (Belgium); González-Robles, E.; Kienzler, B. [Karlsruhe Institute of Technology Institute for Nuclear Waste Disposal (KIT-INE), PO Box 3640, D-76021 Karlsruhe (Germany); Curti, E. [Laboratory for Waste Management, Nuclear Energy and Safety Dept., Paul Scherrer Institute, 5232 Villigen PSI (Switzerland); Serrano-Purroy, D. [European Commission, DG Joint Research Centre - JRC, Directorate G - Nuclear Safety & Security, Department G.III, PO Box 2340, D-76125 Karlsruhe (Germany); Sureda, R.; Martínez-Torrents, A. [CTM Centre Tecnològic, Plaça de la Ciència 2, 08243 Manresa (Spain); Roth, O. [Studsvik, Nuclear AB, 611 82 Nyköping (Sweden); Slonszki, E. [Magyar Tudományos Akadémia Energiatudományi Kutatóközpont (MTA EK), PO Box 49, H-1525 Budapest (Hungary); Mennecart, T. [Waste and Disposal Expert Group, Belgian Nuclear Research Centre (SCK-CEN), Boeretang 200, 2400 Mol (Belgium); Günther-Leopold, I. [Laboratory for Waste Management, Nuclear Energy and Safety Dept., Paul Scherrer Institute, 5232 Villigen PSI (Switzerland); Hózer, Z. [Magyar Tudományos Akadémia Energiatudományi Kutatóközpont (MTA EK), PO Box 49, H-1525 Budapest (Hungary)

    2017-02-15

    The instant release of fission products from high burn-up UO{sub 2} fuels and one MOX fuel was investigated by means of leach tests. The samples covered PWR and BWR fuels at average rod burn-up in the range of 45–63 GWd/t{sub HM} and included clad fuel segments, fuel segments with opened cladding, fuel fragments and fuel powder. The tests were performed with sodium chloride – bicarbonate solutions under oxidizing conditions and, for one test, in reducing Ar/H{sub 2} atmosphere. The iodine and cesium release could be partially explained by the differences in sample preparation, leading to different sizes and properties of the exposed surface areas. Iodine and cesium releases tend to correlate with FGR and linear power rating, but the scatter of the data is significant. Although the gap between the fuel and the cladding was closed in some high burn-up samples, fissures still provide possible preferential transport pathways. - Highlights: • Leach tests were performed to study the instant release of fission products from high burn-up UO{sub 2} fuels and one MOX fuel. • In these tests, the fission gas release given by the operator was a pessimistic estimator of the iodine and cesium release. • Iodine and cesium release is proportional to linear power rating beyond 200 W cm{sup −1}. • Closure of the fuel-cladding gap at high burn-up slows down the release. • The release rate decreases following an exponential equation.

  14. Studies on the separation of rare earth elements and the nuclear decay properties of short lived rare-earth nuclides in U-235 fission products

    International Nuclear Information System (INIS)

    Ohyoshi, Akira; Ohyoshi, Emiko.

    1980-01-01

    The effect of a complex-forming agent, with which rare earths consecutively form the complexes, on the separation of a pair of adjacent rare earths by electromigration has been investigated. The relation between the separation factor for two complexes and the ligand-ion concentration was examined in the separation of La-Ce and Ce-Pr pairs with nitrilotriacetic acid. Rare earths were able to be isolated rapidly at the optimum ligand-ion concentration in lower one, and this method was applied to study the nuclear decay properties of the short lived isotopes of La, Ce, Pr, Nd and Yt formed in the fission of U-235. This method permits the direct measurement of the decay of La-144 without the interference from the radiation of other fission products. The gamma-ray spectrum of La-144 was measured with a high resolution Ge(Li) detector, and the gamma-transition was observed. From the decay plots of two strong photopeaks, the half-life of La-144 was determined. In the case of Ce fraction, the photopeaks assigned to respective isotopes were observed. In the studies on the decay properties of Pr-148 and Pr-149, the decay plot of the strong photopeak showed good linearity, and the accurate half-life of Pr-148 was determined. Similarly, the half-life of Pr-149 was longer than the previously reported value. (Kako, I.)

  15. Enhanced cosmological GRB rates and implications for cosmogenic neutrinos

    International Nuclear Information System (INIS)

    Yueksel, Hasan; Kistler, Matthew D.

    2007-01-01

    Gamma-ray bursts, which are among the most violent events in the Universe, are one of the few viable candidates to produce ultra high-energy cosmic rays. Recently, observations have revealed that GRBs generally originate from metal-poor, low-luminosity galaxies and do not directly trace cosmic star formation, as might have been assumed from their association with core-collapse supernovae. Several implications follow from these findings. The redshift distribution of observed GRBs is expected to peak at higher redshift (compared to cosmic star formation), which is supported by the mean redshift of the Swift GRB sample, ∼3. If GRBs are, in fact, the source of the observed UHECR, then cosmic-ray production would evolve with redshift in a stronger fashion than has been previously suggested. This necessarily leads, through the GZK process, to an enhancement in the flux of cosmogenic neutrinos, providing a near-term approach for testing the gamma-ray burst-cosmic-ray connection with ongoing and proposed UHE neutrino experiments

  16. Transuranium nuclides in the environment

    International Nuclear Information System (INIS)

    Sakanoue, Masanobu

    1987-01-01

    Many countries are presently concerned with problems relating to the safe disposal of nuclear waste containing various levels of transuranium nuclides. In this context, a review on the distribution and behaviour of transuranium elements in the environment studied at Kanazawa University in Japan is presented. About 17 years ago, a high degree of accumulation of 239 Pu in the surface soil of Nagasaki was found in the Nishiyama area, where 'black rain' occured just after the nuclear bomb explosion. The introduction of newly developed radiochemical methods and instrumentation has enabled studies to be carried out on environmental plutonium isotopes, americium-241 and more recently neptunium-237 with respect to distribution depth profile, variation with time and relationship with organic materials. Valuable information has been obtained on the basis of samples collected from various locations in Japan, including surface soil, sea and lake sediments, atmospheric aerosol, water from the Japan Sea and the Pacific Ocean, and from material related with the 'Bikini Event' of 1954. (orig.)

  17. Muon and cosmogenic neutron detection in Borexino

    International Nuclear Information System (INIS)

    Bellini, G; Bonetti, S; Avanzini, M Buizza; Caccianiga, B; D'Angelo, D; Benziger, J; Bick, D; Cadonati, L; Calaprice, F; Chavarria, A; Galbiati, C; Carraro, C; Davini, S; Chepurnov, A; Derbin, A; Etenko, A; Feilitzsch, F von; Fomenko, K; Franco, D; Gazzana, S

    2011-01-01

    Borexino, a liquid scintillator detector at LNGS, is designed for the detection of neutrinos and antineutrinos from the Sun, supernovae, nuclear reactors, and the Earth. The feeble nature of these signals requires a strong suppression of backgrounds below a few MeV. Very low intrinsic radiogenic contamination of all detector components needs to be accompanied by the efficient identification of muons and of muon-induced backgrounds. Muons produce unstable nuclei by spallation processes along their trajectory through the detector whose decays can mimic the expected signals; for isotopes with half-lives longer than a few seconds, the dead time induced by a muon-related veto becomes unacceptably long, unless its application can be restricted to a sub-volume along the muon track. Consequently, not only the identification of muons with very high efficiency but also a precise reconstruction of their tracks is of primary importance for the physics program of the experiment. The Borexino inner detector is surrounded by an outer water-Cherenkov detector that plays a fundamental role in accomplishing this task. The detector design principles and their implementation are described. The strategies adopted to identify muons are reviewed and their efficiency is evaluated. The overall muon veto efficiency is found to be 99.992 % or better. Ad-hoc track reconstruction algorithms developed are presented. Their performance is tested against muon events of known direction such as those from the CNGS neutrino beam, test tracks available from a dedicated External Muon Tracker and cosmic muons whose angular distribution reflects the local overburden profile. The achieved angular resolution is ∼ 3 0 -5 0 and the lateral resolution is ∼ 35-50 cm, depending on the impact parameter of the crossing muon. The methods implemented to efficiently tag cosmogenic neutrons are also presented.

  18. Natural radio-nuclides in drinking water

    International Nuclear Information System (INIS)

    Deflorin, O.

    2003-01-01

    This article discusses the presence of radio-nuclides in Switzerland's drinking water. The article describes research done into the natural radioactivity to be found in various drinking water samples taken from the public water supply in the Canton of Grisons in eastern Switzerland. The various natural nuclides to be expected are listed and the methods used to take the samples are described. The results of the analysis are presented in the form of sketches showing the geographical distribution of the nuclide samples. Diagrams of the cumulative frequency of the quantities of nuclides found are presented, as are such diagrams for the yearly radioactive doses that the population is exposed to. The results and their consequences for the water supply are discussed in detail and further investigations to be made in the region are proposed

  19. Radioactive nuclides in the living environment

    International Nuclear Information System (INIS)

    Ueno, Kaoru; Hoshi, Michio.

    1993-09-01

    There are several radioactive nuclides in the living environment, such as those existing since the creation of the earth, those coming from experimental nuclear explosions, and radiations of the cosmic rays. A lesson on these radioactive nuclides was considered useful for understanding the place of nuclear technology, and have been made on the title of 'Radioactive Nuclides in the Living Environment' in the general course of the Nuclear Engineering School of Japan Atomic Energy Research Institute. When the curriculum of the general course was modified in 1993, the lesson was left in a changed form. Thus, the textbook of the lesson is presented in this report. The contents are natural and artificial radioactive nuclides in the living environment and where they have come from etc. (author)

  20. Local tissue distribution of fissile nuclides

    International Nuclear Information System (INIS)

    Smith, J.M.

    1981-01-01

    Conventional tissue-section autoradiography of alpha-emitting actinide elements may require prohibitively long exposure times. Neutron-induced or fission-track autoradiography can be used for fissile nuclides such as 233 U, 235 U, and 239 Pu to circumvent this difficulty. The detection limit for these nuclides is about 4 x 10 -13 (weight fraction). This paper describes a specific technique for determining their microdistribution with histologically stained tissue sections

  1. Measurements of neutron cross sections of radioactive waste nuclides

    Energy Technology Data Exchange (ETDEWEB)

    Katoh, Toshio [Gifu College of Medical Technology, Seki, Gifu (Japan); Harada, Hideo; Nakamura, Shoji; Tanase, Masakazu; Hatsukawa, Yuichi

    1998-01-01

    Accurate nuclear reaction cross sections of radioactive fission products and transuranic elements are required for research on nuclear transmutation methods in nuclear waste management. Important fission products in the nuclear waste management are {sup 137}Cs, {sup 135}Cs, {sup 90}Sr, {sup 99}Tc and {sup 129}I because of their large fission yields and long half-lives. The present authors have measured the neutron capture cross sections and resonance integrals of {sup 137}Cs, {sup 90}Sr and {sup 99}Tc. The purpose of this study is to measure the neutron capture cross sections and resonance integrals of nuclides, {sup 129}I and {sup 135}Cs accurately. Preliminary experiments were performed by using Rikkyo University Reactor and JRR-3 reactor at Japan Atomic Energy Research Institute (JAERI). Then, it was decided to measure the cross section and resonance integral of {sup 135}Cs by using the JRR-3 Reactor because this measurement required a high flux reactor. On the other hand, those of {sup 129}I were measured at the Rikkyo Reactor because the product nuclides, {sup 130}I and {sup 130m}I, have short half-lives and this reactor is suitable for the study of short lived nuclide. In this report, the measurements of the cross section and resonance integral of {sup 135}Cs are described. To obtain reliable values of the cross section and resonance integral of {sup 135}Cs(n, {gamma}){sup 136}Cs reaction, a quadrupole mass spectrometer was used for the mass analysis of nuclide in the sample. A progress report on the cross section of {sup 134}Cs, a neighbour of {sup 135}Cs, is included in this report. A report on {sup 129}I will be presented in the Report on the Joint-Use of Rikkyo University Reactor. (author)

  2. Residual Nuclides Induced in Cu Target by a 250 MeV Proton Beam

    International Nuclear Information System (INIS)

    Zhang Hong-Bin; Zhang Xue-Ying; Ma Fei; Ju Yong-Qin; Ge Hong-Lin; Chen Liang; Zhang Yan-Bin; Li Yan-Yan; Luo Peng; Wang Jian-Guo; Wan Bo; Xu Xiao-Wei; Wei Ji-Fang; Zhou Bin

    2015-01-01

    Residual nuclide production is studied experimentally by bombarding a Cu target with a 250 MeV proton beam. The data are measured by the off-line γ-spectroscopy method. Six nuclides are identified and their cross sections are determined. The corresponding calculated results by the MCNPX and GEANT4 codes are compared with the experimental data to check the validity of the codes. A comparison shows that the MCNPX simulation has a better agreement with the experiment. The energy dependence of residual nuclide production is studied with the aid of MCNPX simulation, and it is found that the mass yields for the nuclides in the light mass region increase significantly with the proton energy. (paper)

  3. Progress on multi-nuclide AMS of JAEA-AMS-TONO

    Science.gov (United States)

    Saito-Kokubu, Yoko; Matsubara, Akihiro; Miyake, Masayasu; Nishizawa, Akimitsu; Ohwaki, Yoshio; Nishio, Tomohiro; Sanada, Katsuki; Hanaki, Tatsumi

    2015-10-01

    The JAEA-AMS-TONO (Japan Atomic Energy Agency's Accelerator Mass Spectrometer established at the Tono Geoscience Center) facility has been used for the dating of geological samples. The AMS system is versatile, based on a 5 MV tandem Pelletron-type accelerator. Since its establishment in 1997, the AMS system has been used for measurement of carbon-14 (14C) mainly for 14C dating studies in neotectonics and hydrogeology, in support of JAEA's research on geosphere stability applicable to the long-term isolation of high-level radioactive waste. Results of the measurement of 14C in soils and plants has been applied to the dating of fault activity and volcanism. Development of beryllium-10 (10Be) and aluminum-26 (26Al) AMS systems are now underway to enhance the capability of the multi-nuclide AMS in studies of dating by cosmogenic nuclides. The 10Be-AMS system has already been used for routine measurements in applied studies and improvements of the measurement technique have been made. Now we plan to fine tune the system and perform test measurements to develop the 26Al-AMS system.

  4. Progress on multi-nuclide AMS of JAEA-AMS-TONO

    Energy Technology Data Exchange (ETDEWEB)

    Saito-Kokubu, Yoko, E-mail: kokubu.yoko@jaea.go.jp [Japan Atomic Energy Agency, Toki, Gifu 509-5102 (Japan); Matsubara, Akihiro [Japan Atomic Energy Agency, Toki, Gifu 509-5102 (Japan); Miyake, Masayasu; Nishizawa, Akimitsu; Ohwaki, Yoshio; Nishio, Tomohiro; Sanada, Katsuki [Pesco Corp., Ltd., Toki, Gifu 509-5123 (Japan); Hanaki, Tatsumi [Japan Atomic Energy Agency, Toki, Gifu 509-5102 (Japan)

    2015-10-15

    The JAEA-AMS-TONO (Japan Atomic Energy Agency’s Accelerator Mass Spectrometer established at the Tono Geoscience Center) facility has been used for the dating of geological samples. The AMS system is versatile, based on a 5 MV tandem Pelletron-type accelerator. Since its establishment in 1997, the AMS system has been used for measurement of carbon-14 ({sup 14}C) mainly for {sup 14}C dating studies in neotectonics and hydrogeology, in support of JAEA’s research on geosphere stability applicable to the long-term isolation of high-level radioactive waste. Results of the measurement of {sup 14}C in soils and plants has been applied to the dating of fault activity and volcanism. Development of beryllium-10 ({sup 10}Be) and aluminum-26 ({sup 26}Al) AMS systems are now underway to enhance the capability of the multi-nuclide AMS in studies of dating by cosmogenic nuclides. The {sup 10}Be-AMS system has already been used for routine measurements in applied studies and improvements of the measurement technique have been made. Now we plan to fine tune the system and perform test measurements to develop the {sup 26}Al-AMS system.

  5. Testing the Nunatak Refugia Hypothesis in the Eastern Canadian Arctic with Cosmogenic Nuclides 14C, 10Be, and 26Al

    Science.gov (United States)

    Miller, G. H.; Briner, J. P.; Lifton, N.; Kaplan, M. R.; Refsnider, K. A.

    2008-12-01

    For more than a century the processes by which plants rapidly colonized vast regions formerly covered by Late Quaternary continental ice sheets has been vigorously debated. It has been postulated that refugial plant communities survived on nunataks above ice-sheet surfaces, and that these relict populations facilitated rapid colonization. While glacial mapping confirms that some highlands in the Eastern Canadian Arctic remained above the Laurentide Ice Sheet (LIS) throughout the last glacial maximum (LGM), whether they remained free of local ice carapaces is uncertain. To test the nunatak refugia hypothesis we sampled quartz-rich bedrock from rolling uplands of Broughton Is. (67.5 N; 63.5 E; 600 m asl), one of the most distal high islands bordering the eastern margin of the LIS. At the peak of the LGM, outlet glaciers of the LIS impinged on the island, but did not reach above 100 m asl. Close to the summit, flat-lying quartz-rich veins crop out extensively with 2 to 10 cm of weathering relief. Two samples have 10Be and 26Al exposure ages in excess of 200 ka, but 26Al/10Be of only 3.8. Two tors 150 m lower have 10Be and 26Al exposure ages in excess of 100 ka, and similarly low 26Al/10Be (3.5). The time elapsed to acquire these values exceeds 1 Ma without erosion for the higher samples, and only slightly less for the lower samples, confirming that these sites have not been inundated by actively eroding continental ice since at least the early Quaternary. To evaluate whether a protective ice cap mantled the island during the LGM we measured in situ 14C inventories in the two summit samples for which 10Be and 26Al were also measured. If the summit had been free of ice during the LGM and served as a plant refugium, then the 14C inventories should be at their maximum levels. If, however, the summit was mantled by a thick (>30 m) snowfield or cold-based ice carapace, then 14C inventories should reflect only Holocene surface exposure. Both samples contained in situ 14C inventories indicating exposure only since the earliest Holocene (9.3 ± 0.5 ka and 11.0 ± 0.7 ka). The lack of greater 14C inventories requires that the sites were shielded for at least 25 ka prior to the Holocene. The most likely scenario is that protective ice carapaces mantled all but the steepest unglaciated nunataks throughout the LGM in the Eastern Canadian Arctic. These ice caps accomplished no landscape modification, but they did effectively shield rock surfaces from incoming cosmic rays, and would have prohibited any photosynthesis. Nunataks could only serve as biological refugia if seed stocks/spores could remain viable if frozen for >20 ka.

  6. Nuclide release from the near-field of a L/ILW repository

    International Nuclear Information System (INIS)

    Karlsson, L.G.; Hoeglund, L.O.; Pers, K.

    1986-12-01

    For Project Gewaehr 1985, the release of nuclides from a repository for low- and intermediate-level radioactive waste is calculated. The calculations are made for a reference design repository located in the marl host rock at the Oberbauen Stock reference site. The results are limited to the release of the nuclides from the waste through the engineered barriers into the surrounding host rock and will, therefore, constitute a source term for the far-field and biosphere calculations. The most probable nuclide transport mechanism is diffusion and releases are thus influenced by the nuclide diffusivities in the barriers, nuclide sorption and nuclide solubility limits. Degradation of the engineered concrete barriers is taken into account. The effects of convective flow through the barriers are described elsewhere. A near-field release model is presented. It consists of a set of computer programs suited to handel different repository designs, solubility limitations and the different waste categories. The release calculations were made for a base case in which best estimates of the parameters were used. Sensitivity to the choice of the most important parameters was tested by parameter variations. The numerical models used were checked by comparative calculations with different codes and similar data. The results of the base calculations show that near-field barriers will cause both a delay of the release to the far-field and a reduced rate of release. The sorbed nuclides, comprising the actinides and some activation and fission products, will be delayed by 10'000 years and have a maximum release rate of less than 10 -3 Ci/a each. The non-sorbed nuclides are delayed by only about 100 years and the maximum release rate is less than 10 -2 Ci per year and nuclide. The parameter variations and the design model tests gave only limited deviations from the base case results. (author)

  7. Nuclides 2000: an electronic chart of the nuclides on CD-ROM

    International Nuclear Information System (INIS)

    Magill, J.

    2000-01-01

    The 'Nuclides 2000' software package is an electronic chart of the nuclides, available on CD-ROM for Microsoft Windows operating systems, which offers extensive basic information on physics and radiology of the familiar nuclides. Moreover, 'Nuclides 2000' contains codes for a number of applications which allow the required data to be computed quickly and reliably by means of interactive user guidance. The data and codes are supplemented by information in the format of contributions on the history of radioactivity and radiochemistry, and on subjects of interest in physics, such as C-14 dating and the generation of Ti-44 in a supernova, and by a link collection of Internet addresses. As a detailed database, 'Nuclides 2000' can be used for teaching, research, and for practical applications. (orig.) [de

  8. The MacNuclide nuclear data environment

    International Nuclear Information System (INIS)

    Stone, C.A.

    1992-01-01

    Advance in technology have produced intriguing tools that can be applied to problems in nuclear science. Information management in nuclear science is an example of how technology is not quickly exploited. The U.S. Department of Energy supports an extensive program to evaluate published nuclear properties and store them in an electronic data base. Much of the evaluation effort has focused on producing the journal Nuclear Data Sheets and the publication Table of Isotopes. Although the electronic data base can itself be a valuable source of information, the software used to access is was designed using decades-old technologies. The authors of this paper have developed a novel data-base management system for nuclear properties. The application is known as MacNuclide. It is a nuclear data-base environment that uses the highly interactive and intuitive windowing environmentsof desk-top computers. The environment is designed around that image of the chart of nuclides. Questions are posed to the data base by placing constraints on properties and defining collections of nuclides to be used in data-base seraches. Results are displayed either as a simple list of nuclides that meet the imposed constraints or as a color chart of nuclides

  9. Special actinide nuclides: Fuel or waste?

    International Nuclear Information System (INIS)

    Srinivasan, M.; Rao, K.S.; Dingankar, M.V.

    1989-01-01

    The special actinide nuclides such as Np, Cm, etc. which are produced as byproducts during the operation of fission reactors are presently looked upon as 'nuclear waste' and are proposed to be disposed of as part of high level waste in deep geological repositories. The potential hazard posed to future generations over periods of thousands of years by these long lived nuclides has been a persistent source of concern to critics of nuclear power. However, the authors have recently shown that each and every one of the special actinide nuclides is a better nuclear fuel than the isotopes of plutonium. This finding suggests that one does not have to resort to exotic neutron sources for transmuting/incinerating them as proposed by some researchers. Recovery of the special actinide elements from the waste stream and recycling them back into conventional fission reactors would eliminate one of the stigmas attached to nuclear energy

  10. Behaviour of transuranic nuclides in coastal environment

    International Nuclear Information System (INIS)

    Pillai, K.C.; Mathew, E.; Matkar, V.M.; Dey, N.N.; Abani, M.C.; Chhapgar, B.F.; Mullay, C.D.

    1982-01-01

    In view of the nuclear technological developments, the potential for contamination of marine environment with transuranic nuclides has increased. In this context it is necessary to know not only the current levels of these artificial nuclides but there is also a need to understand the physico-chemical, biological and geochemical behaviour of transuranics to evaluate their significance in the marine environment. Studies on these aspects have been carried out in the coastal environment of the west coast of India, near Bombay. The results obtained and conclusions drawn from the various investigations carried out are given in this document

  11. Nuclides.net: An integrated environment for computations on radionuclides and their radiation

    International Nuclear Information System (INIS)

    Galy, J.; Magill, J.

    2002-01-01

    Full text: The Nuclides.net computational package is of direct interest in the fields of environment monitoring and nuclear forensics. The 'integrated environment' is a suite of computer programs ranging from a powerful user-friendly interface, which allows the user to navigate the nuclide chart and explore the properties of nuclides, to various computational modules for decay calculations, dosimetry and shielding calculations, etc. The main emphasis in Nuclides.net is on nuclear science applications, such as health physics, radioprotection and radiochemistry, rather than nuclear data for which excellent sources already exist. In contrast to the CD-based Nuclides 2000 predecessor, Nuclides.net applications run over the internet on a web server. The user interface to these applications is via a web browser. Information submitted by the user is sent to the appropriate applications resident on the web server. The results of the calculations are returned to the user, again via the browser. The product is aimed at both students and professionals for reference data on radionuclides and computations based on this data using the latest internet technology. It is particularly suitable for educational purposes in the nuclear industry, health physics and radiation protection, nuclear and radiochemistry, nuclear physics, astrophysics, etc. The Nuclides.net software suite contains the following modules/features: a) A new user interface to view the nuclide charts (with zoom features). Additional nuclide charts are based on spin, parity, binding energy etc. b) There are five main applications: (1) 'Decay Engine' for decay calculations of numbers, masses, activities, dose rates, etc. of parent and daughters. (2) 'Dosimetry and Shielding' module allows the calculation of dose rates from both unshielded and shielded point sources. A choice of 10 shield materials is available. (3) 'Virtual Nuclides' allows the user to do decay and dosimetry and shielding calculations on mixtures of

  12. The nuclide inventory in SFR-1; Nuklidinventariet i SFR-1

    Energy Technology Data Exchange (ETDEWEB)

    Ingemansson, Tor [ALARA Engineering, Skultuna (Sweden)

    2001-10-01

    This report is an account for a project carried out on behalf of the Swedish Radiation Protection Authority (SSI): 'Nuclide inventory in SFR-1' (The Swedish underground disposal facility for low and intermediate level reactor waste). The project comprises the following five sub-projects: 1) Measuring methods for nuclides, difficult to measure, 2) The nuclide inventory in SFR-1, 3) Proposal for nuclide library for SFR-1 and ground disposal, 4) Nuclide library for exemption, and 5) Characterising of the nuclide inventory and documentation for SFL waste. In all five sub-projects long-lived activity, including Cl-36, has been considered.

  13. Chart of the nuclides - Strasbourg 1990

    International Nuclear Information System (INIS)

    Antony, M.S.

    1991-01-01

    Data were compiled for a nuclide chart over the last two years. The compilation is complete to the end of September 1990. The chart includes about 30000 data. Decay modes are represented by colours. Announcement capabilities and prices are given. (G.P.) 3 refs

  14. Recalculation of measured fuel nuclide concentrations

    International Nuclear Information System (INIS)

    Moeller, W.

    1984-01-01

    The concentrations and concentration ratios of heavy fuel nuclides determined in the Central Institute for Nuclear Research Rossendorf on the basis of destructive burnup measurements are compared with the results of microburnup calculations. The possibility is discussed to improve the results by taking into account the spectral characteristics at the positions of the measuring samples. (author)

  15. Sampling soils for transuranic nuclides: a review

    International Nuclear Information System (INIS)

    Fowler, E.B.; Essington, E.H.

    1976-01-01

    A review of the literature pertinent to the sampling of soils for radionuclides is presented; emphasis is placed on transuranic nuclides. Sampling of soils is discussed relative to systems of heterogeneous distributions and varied particle sizes encountered in certain environments. Sampling methods that have been used for two different sources of contamination, global fallout, and accidental or operational releases, are included

  16. Radioactive nuclides in the marine environment

    International Nuclear Information System (INIS)

    Yamato, Aiji; Miyagawa, Naoto; Miyanaga, Naotake

    1984-01-01

    To investigate behaviour of 95 Zr, 95 Nb in the marine environment, various samples have been collected and measured by means of Ge(Li) γ-ray spectrometry and/or radiochemical analysis during a period from 1974 to 1982 at coastal area of Tokai-mura, Ibaraki prefecture. Concentration of the nuclides in seaweeds increased remarkably after atmospheric nuclear detonation by P.R. of China, and the activity ratio between the nuclides changed by time was not fit well by the transient decay equation. Concentration variation in sea water was smaller than that in sea weeds, and the minimum change in sea sediment. Increase of concentration in these environmental samples was observed in chronological order of sea water, sea weeds then sediment after detonations, suggesting that the uptake of the nuclides by these sea weeds from sea water is faster than that via root. Observed concentration factors on the nuclides by sea weeds were calculated from the observed concentrations in sea water and sea weeds. Maximum values on 95 Zr and 95 Nb were 2110, 2150, respectively for Ecklonia cava and Eisenia bicyclis. (author)

  17. Toxicology of thorium cycle nuclides

    International Nuclear Information System (INIS)

    Ballou, J.E.

    1984-01-01

    The purpose of this project is to investigate the biological hazards associated with uranium-thorium breeder fuels and fuel recycle process solutions. Initial studies emphasize the metabolism and long-term biological effects of inhaled 233 U- 232 U nitrate and oxide fuel materials and of 231 Pa, a major, long-lived, radioactive waste product. 1 figure, 3 tables

  18. Method Validation for the Gamma-ray Spectrometric Determination of Natural Radioactive Nuclides in NORM Samples - Method Validation for the Gamma-ray Spectrometric Determination of Natural Radionuclides in raw materials and by-products

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Young-Yong; Lim, Jong-Myoung; Jang, Mee; Kim, Chang-Jong; Chung, Kun Ho; Kang, Mun Ja; Choi, Geun-Sik [Environmental Radioactivity Assessment Team, Korea Atomic Energy Research Institute, 111, Daedeok-daero 989, Yuseong, Daejeon, 305-353 (Korea, Republic of)

    2014-07-01

    It has established the 'Act on safety control of radioactive rays around living environment' in Korea, since 2011, to protect the public from natural occurring radioactive materials (NORM) and their by-products. The increasing concerns regarding the radioactivity of those materials therefore dictate many demands for the radioactive analysis for them. There are several methods to determine the concentration of natural radionuclides, such as {sup 235}U, {sup 238}U, {sup 226}Ra, {sup 232}Th, and so on, through a radiochemical analysis using an alpha spectrometer, mass spectrometer and liquid scintillation counter. However, gamma-ray spectroscopy still has an effect on the assessment of radioactive concentration for these nuclides and their progenies. To adapt a gamma spectrometer to the determination of natural radionuclides, the feasibility of their analysis methods should be first verified and validated with respect to accuracy and time and cost constraints. In general, one of the well-known processes in analyzing uranium with a gamma spectrometer is an indirect measurement using the secular equilibrium state with their progenies in a sample. This method, however, demands the time elapsed about 3 weeks to reach the equilibrium state between {sup 226}Ra and {sup 222}Rn and the sufficient integrity of a sample bottle to prevent the leakage of radon isotopes which is a form of noble gas. The simple and quick method is to directly measure a full energy absorption peak of 186.2 keV from {sup 226}Ra without the secular equilibrium state between {sup 226}Ra and {sup 222}Rn in the common sample bottle. However, this direct measurement also has difficulties about the interference with a full energy absorption peak of 185.7 keV from {sup 235}U. In this study, direct measurement with the interference correction technique, which uses several reference peaks for gamma-rays from {sup 235}U and {sup 234}Th, and indirect measurement, which means the identification of {sup

  19. Radioactive nuclides in nuclear reactors

    International Nuclear Information System (INIS)

    Akatsu, Eiko

    1982-12-01

    In the Nuclear Engineering School of JAERI, many courses are presented for the people working in and around nuclear reactors. The curricula of the courses contain also chemical subject materials. With reference to the foreign curricula, a plan of educational subject material of chemistry was considered for students of the school in the previous report (JAERI-M 9827), where the first part of the plan, ''Fundamentals of Reactor Chemistry'', was reviewed. This report is a review of the second part of the plan containing fission products chemistry, actinoids elements chemistry and activated reactor materials chemistry. (author)

  20. Toxicity of thorium cycle nuclides

    International Nuclear Information System (INIS)

    Ballou, J.E.

    1986-01-01

    The purpose of this project is to investigate the biological hazards associated with uranium-thorium breeder fuels and fuel recycle process solutions. Initial studies emphasize the metabolism and long-term biological effects of inhaled 233 U- 232 U nitrate and oxide fuel materials and of 231 Pa, a major, long-lived, radioactive waste product. Rats were used as test animals. Dose-response relationships for malignant lung-tumor and bone-tumor induction after 232 UO 2 (NO 3 ) 2 inhalation are discussed. 2 figures, 1 table

  1. Tectonic-Volcanic Interplay in the Dabbahu Segment of the Afar Rift from Cosmogenic 3He Constraints

    Science.gov (United States)

    Williams, A.; Pik, R.; Burnard, P.; Lahitte, P.; Yirgu, G.; Adem, M.

    2008-12-01

    The Afar Rift in Ethiopia is one of the only subaerial locations in the world where the transition from continental break-up to oceanic-spreading can be observed. Extension and volcanism in the Afar is concentrated in tectono-magmatic segments (TMS), similar in size and morphology to those that characterise spreading ridges. The Dabbahu TMS is the southernmost of the western Afar and has recently been the site of significant activity. A massive seismic event in late 2005, triggered by the injection of an 8-m wide dyke, heralded the onset of a new rifting period in the Dabbahu TMS. Volcanic activity associated with the periods of magma-driven extension, which have recurred at 4-8 mth intervals, has been both silicic (explosive) and basaltic (fissural). The most recent activity in the Afar thus testifies to the close interplay of tectonics and magmatism in rifting environments. In an effort to decipher the long-term structural and volcanic evolution of Dabbahu TMS we have employed the cosmogenic nuclide dating technique to provide chronological data for the segment. This method has advantages over other geochronological tools in that we can target both volcanic and tectonic surfaces of a few Kyr to several Myr age. Baddi Volcano, located off-axis on the western margin of the TMS, is a bimodal central stratovolcano typical of the Afar TMS. Late-stage basaltic lava flows cap an acidic base, which has been dated at 290 ± 4 ka using the K-Ar technique (Lahitte et al., 2003). Following preliminary sampling in 2007, we have determined a cosmogenic 3He age of 53.4 ± 3.7 ka from multiple samples from one of the basaltic flows on the NW flank of Baddi. These data show a significant time gap (240 Kyr) between the final phase of acidic volcanism and the onset of basaltic activity at the central volcanoes, presumably related to the rate of magma chamber replenishment. To test whether the spectacular shift to basaltic activity at 53 ka represents replenishment of the entire sub

  2. Corrosion Tests of LWR Fuels - Nuclide Release

    International Nuclear Information System (INIS)

    P.A. Finn; Y. Tsai; J.C. Cunnane

    2001-01-01

    Two BWR fuels [64 and 71 (MWd)/kgU], one of which contained 2% Gd, and two PWR fuels [30 and 45 (MWd)/kgU], are tested by dripping groundwater on the fuels under oxidizing and hydrologically unsaturated conditions for times ranging from 2.4 to 8.2 yr at 90 C. The 99 Tc, 129 I, 137 Cs, 97 Mo, and 90 Sr releases are presented to show the effects of long reaction times and of gadolinium on nuclide release. This investigation showed that the five nuclides at long reaction times have similar fractional release rates and that the presence of 2% Gd reduced the 99 Tc cumulative release fraction by about an order of magnitude over that of a fuel with a similar burnup

  3. Overview of Task 4 nuclide transport data

    International Nuclear Information System (INIS)

    Serne, R.J.

    1977-01-01

    A multi-year program plan is presented to collect the necessary data on nuclide sorption-desorption interactions with geologic media. Detailed activities which need to be performed in each of the six subtasks are described. The general areas in which each subcontractor performed work in FY 77 were presented in the overview. Detailed technical discussions of each subcontractor's work will be presented in ensuing presentations

  4. Transmutation of long-lived nuclides

    International Nuclear Information System (INIS)

    Liang Tongxiang; Tang Chunhe

    2003-01-01

    Partitioning and transmutation of long-lived nuclides have profound benefits for economic development, global political stability and the environment. This technology would reduce nuclear waste disposal requirements, prevent proliferation and eliminate a major hurdle to the development of nuclear power. This paper reviews the advanced fuel cycle process and development of ATW in the world, and some suggestions about the R and D of nuclear power in China are proposed

  5. Increased production of cosmogenic 10Be recorded in oceanic sediment sequences: Information on the age, duration, and amplitude of the geomagnetic dipole moment minimum over the Matuyama-Brunhes transition

    Science.gov (United States)

    Simon, Quentin; Thouveny, Nicolas; Bourlès, Didier L.; Bassinot, Franck; Savranskaia, Tatiana; Valet, Jean-Pierre; Aster Team

    2018-05-01

    New high-resolution authigenic 10Be/9Be ratio (Be-ratio) records covering the last geomagnetic reversal, i.e. the Matuyama-Brunhes transition (MBT), have been obtained and set on a time scale using benthic δ18O (Cibicides wuellerstorfi) records. The geographic distribution of the four studied sites allows global comparison between the North Atlantic, Indian and Pacific Oceans. All Be-ratio records contain a two-fold increase triggered by the geomagnetic dipole moment (GDM) collapse associated with the MBT. The stratigraphic position of the Be-ratio spike, relative to marine isotope stages, allows establishment of a robust astrochronological framework for the MBT, anchoring its age between 778 and 766 ka (average mid-peaks at 772 ka), which is consistent with all other available 10Be-proxy records from marine, ice and loess archives. The global 10Be atmospheric production doubling represents an increase of more than 300 atoms m-2 s-1 that is compatible with the increased magnitude of atmospheric 10Be production obtained by simulations between the present GDM and a null-GDM. The minimum 10Be-derived GDM average computed for the 776-771 ka interval is 1.7 ± 0.4 ×1022 Am2, in agreement with model simulations and absolute paleointensities of transitional lava flows.

  6. Study of the cosmogenic activation in NaI(Tl) crystals within the ANAIS experiment

    Science.gov (United States)

    Villar, P.; Amaré, J.; Cebrián, S.; Coarasa, I.; García, E.; Martínez, M.; Oliván, M. A.; Ortigoza, Y.; Ortiz de Solórzano, A.; Puimedón, J.; Sarsa, M. L.; Villar, J. A.

    2018-03-01

    The direct detection of galactic dark matter particles requires ultra-low background conditions. NaI(Tl) crystals are applied in the search for these dark matter particles through their interactions in the detector by measuring the scintillation signal produced. The production of long-lived isotopes in materials due to the exposure to cosmic rays on Earth’s surface can be an hazard for these ultra-low background demanding experiments, typically performed underground. Therefore, production rates of cosmogenic isotopes in all the materials present in the experimental set-up, as well as the corresponding cosmic rays exposure history, must be both well-known in order to assess the relevance of this effect in the achievable sensitivity of a given experiment. Here, analysis of the cosmogenic studies developed from the ANAIS experiment NaI(Tl) detectors are presented. Installed inside a convenient shielding at the Canfranc Underground Laboratory just after finishing surface exposure to cosmic rays and thanks to the prompt data taking developed, identification and quantification of isotopes with half-lives of the order of tens of days were allowed, and thanks to the long-term operation of the detectors long-lived isotopes have been also identified and quantified. Main results for the activation yields of iodine and tellurium isotopes, 22Na, 113Sn, 109Cd, and tritium are presented in this work, together with the estimate of the production rates for their activation by cosmic nucleons while on Earth’s surface based on a selection of excitation functions over the entire energy range of cosmic nucleons.

  7. Light nuclides produced in the proton-induced spallation of {sup 238}U at 1 GeV

    Energy Technology Data Exchange (ETDEWEB)

    Ricciardi, M.V.; Armbruster, P. [Gesellschaft fuer Schwerionenforschung mbH, Darmstadt (Germany); Benlliure, J. [Universidad de Santiago de Compostela (ES)] [and others

    2005-09-01

    The production of light and intermediate-mass nuclides formed in the reaction {sup 1}H+{sup 238}U at 1 GeV was measured at the fragment separator (FRS) at GSI, Darmstadt. The experiment was performed in inverse kinematics, shooting a 1 A GeV {sup 238}U beam on a thin liquid-hydrogen target. 254 isotopes of all elements in the range 7{<=}Z{<=}37 were unambiguously identified, and the velocity distributions of the produced nuclides were determined with high precision. The results show that the nuclides are produced in a very asymmetric binary decay of heavy nuclei originating from the spallation of uranium. All the features of the produced nuclides merge with the characteristics of the fission products as their mass increases. (orig.)

  8. Cosmogenic radioisotopes in Gebel Kamil meteorite

    Science.gov (United States)

    Taricco, C.; Colombetti, P.; Bhandari, N.; Sinha, N.; Di Martino, M.; Vivaldo, G.

    2012-04-01

    Recently a small (45 m in diameter) and very young (radioisotope activity generated by cosmic rays in the meteoroids as they travel through the interplanetary space before falling on the Earth. From the 26Al activity measurement and its depth production profiles, we infer (i) that the radius of the meteoroid should be about 1 m, constraining to 30-40 ton the range of pre-atmospheric mass previously proposed and (ii) that the fragment should have been located deeply inside the meteoroid, at a depth > 0.7 m. The 44Ti activity is under the detection threshold of the apparatus; using the depth production profiles of this radioisotope and its half-life T1/2 = 59.2 y, we deduce an upper limit to the date of fall.

  9. An update on in situ cosmogenic {sup 14}C analysis at ETH Zuerich

    Energy Technology Data Exchange (ETDEWEB)

    Hippe, K., E-mail: hippe@erdw.ethz.ch [Institute of Geochemistry and Petrology, ETH Zuerich, Zuerich CH-8092 (Switzerland); Kober, F. [Institute of Geology, ETH Zuerich, Zuerich CH-8092 (Switzerland); Wacker, L. [Institute for Particle Physics, ETH Zuerich, Zuerich CH-8093 (Switzerland); Fahrni, S.M. [Institute for Particle Physics, ETH Zuerich, Zuerich CH-8093 (Switzerland); Department of Chemistry and Biochemistry, University of Bern, Bern CH-3012 (Switzerland); Ivy-Ochs, S. [Institute for Particle Physics, ETH Zuerich, Zuerich CH-8093 (Switzerland); Akcar, N.; Schluechter, C. [Institute of Geological Sciences, University of Bern, Bern CH-3012 (Switzerland); Wieler, R. [Institute of Geochemistry and Petrology, ETH Zuerich, Zuerich CH-8092 (Switzerland)

    2013-01-15

    We present the improved performance of the modified in situ cosmogenic {sup 14}C extraction system at ETH Zuerich. Samples are now processed faster (2 days in total) and are measured with a high analytical precision of usually <2% using the gas ion source of the MICADAS AMS facility. Measurements of the PP-4 standard sample show a good reproducibility and consistency with published values. Procedural blanks are very low at currently {approx}4.0 Multiplication-Sign 10{sup 414}C atoms. Analyses of samples from a {approx}300 year old rock avalanche prove that we can successfully apply in situ{sup 14}C exposure dating to very young surfaces. Additionally, we present a modified calculation scheme for in situ{sup 14}C concentrations which differs from that used for conventional radiocarbon dating. This new approach explicitly accounts for the characteristics of in situ{sup 14}C production.

  10. What we know about Oslo meteorite from cosmogenic isotope analysis

    Science.gov (United States)

    Tymiński, Z.; Stolarz, M.; Kubalczak, T.; Zaręba, P.; Burski, M.; Bilet, M.; Miśta, E.; Tymińska, K.; Kołakowska, E.; Burakowska, A.; Żołądek, P.; Olech, A.; Wiśniewski, M.; Listkowska, A.; Saganowski, P.

    2015-10-01

    The fragments of an asteroid that had crashed over Norway were found in a few locations in Oslo at the beginning of March 2012. Later on some pieces of meteorite from the most South area were collected by the Meteoritical Section members of Comet and Meteor Workshop (PKiM) with the help of local meteoritical authorities. One meteorite fragment of 32g was used to measure cosmogenic radionuclides using non-destructive high-resolution gamma spectrometry technique. Five radioisotopes such as Al-26, Na-22, Mn-54, Co-57 and Co-60 were detected

  11. Ultrahigh energy cosmic ray fluxes and cosmogenic neutrinos

    Energy Technology Data Exchange (ETDEWEB)

    Stanev, Todor

    2013-04-15

    We discuss the possible origin of the two neutrino shower events reported by the IceCube Collaboration at the Neutrino 2012 conference in Kyoto, Japan. The suspicion early on was that these two events are due to cosmogenic neutrinos and possibly by electron antineutrinos generating the Glashow resonance. The difference of the energy of the W{sup −} in the resonance and the energy estimates of the detected cascade events makes this assumption unlikely. The conclusion then may be that these high energy neutrinos are produced at sources of high energy cosmic rays such as Active Galactic Nuclei.

  12. Reconciling radiocarbon and ice core timescales over the Holocene - Cosmogenic radionuclides as synchronization tools

    Science.gov (United States)

    Muscheler, R.; Adolphi, F.; Mekhaldi, F.

    2015-12-01

    The atmospheric production rates of cosmogenic radionuclides, such as 14C and 10Be, vary globally due to external processes, namely the solar and geomagnetic modulation of the galactic cosmic ray flux as well as solar proton events. This signature is recorded in various archives such as ice cores (10Be) and tree-rings (14C). Hence, cosmogenic radionuclides offer a means to continuously assess timescale differences between two of the most widely used timescales in paleoclimatology - the radiocarbon and the ice core timescales. Short lived solar proton events additionally provide distinct marker horizons that allow synchronization of discrete horizons at annual precision. We will present a cosmogenic radionuclide based synchronization of the Greenland ice core timescale (GICC05, Svensson et al., 2008) and the radiocarbon timescale (IntCal13, Reimer et al., 2013) over the Holocene. This synchronization allows radiocarbon dated and ice core paleoclimate records to be compared on a common timescale at down to sub-decadal precision. We will compare these results to independent discrete isochrones obtained from tephrochronology and solar proton events. In addition, we will discuss implications for the accuracy and uncertainty estimates of GICC05 over the Holocene. Reimer, P. J., Bard, E., Bayliss, A., Beck, J. W., Blackwell, P. G., Bronk Ramsey, C., Buck, C. E., Cheng, H., Edwards, R. L., Friedrich, M., Grootes, P. M., Guilderson, T. P., Haflidason, H., Hajdas, I., Hatté, C., Heaton, T. J., Hoffmann, D. L., Hogg, A. G., Hughen, K. A., Kaiser, K. F., Kromer, B., Manning, S. W., Niu, M., Reimer, R. W., Richards, D. A., Scott, E. M., Southon, J. R., Staff, R. A., Turney, C. S. M., and van der Plicht, J.: IntCal13 and Marine13 Radiocarbon Age Calibration Curves 0-50,000 Years cal BP, Radiocarbon, 55, 1869-1887, 10.2458/azu_js_rc.55.16947, 2013. Svensson, A., Andersen, K. K., Bigler, M., Clausen, H. B., Dahl-Jensen, D., Davies, S. M., Johnsen, S. J., Muscheler, R., Parrenin

  13. Nuclide-specific monitoring of airborne radioactivity

    International Nuclear Information System (INIS)

    Aures, R.; Neu, A.

    1996-01-01

    Since the end of the seventies the Landesanstalt fuer Umweltschutz Baden-Wuerttemberg ist operating two radioaerosol monitoring stations at the border in the opposite of foreign nuclear power plants. Since the end of the eighties six similar monitoring stations were built up for measuring activity in breathing air in the common environment in Baden-Wuerttemberg. A special filtersystem allows measuring the activity concentration of up to 99 nuclides. The measuring system was optimized by advanced PC-technology, a multitasking operating system and a special software for users and gamma-spectroscopy. These increased the average availability of all monitoring stations to 96% in 1996. (orig.) [de

  14. Instant detection of incorporated radio-nuclides

    International Nuclear Information System (INIS)

    Dolgirev, E.I.; Porozov, N.V.

    1978-01-01

    A method is described for rapid estimation of radionuclides both in the whole human body and in individual human organs beginning from levels equal to 0.1-0.01 of the maxium permissible value of annual absorption by personnel. In post-accident radiation exposure surveys, the whole-body content of gamma-emitting nuclides is monitored by measuring the flow of gamma quanta by use of a gas-discharge counter cassette placed at a distance of 0.5 m from the subject. Relationships for determining radionuclides in the human body are presented

  15. The recovery and study of heavy nuclides produced in a nuclear explosion - the Hutch event

    International Nuclear Information System (INIS)

    Hoff, R.W.; Hulet, E.K.

    1970-01-01

    During the explosion of the Hutch device, the target ( 238 U and 232 Th) was subjected to a very high neutron exposure, 2.4 x 10 25 neutrons /cm 2 . Multiple neutron capture reactions resulted in the production of heavy nuclides, up to and including 257Fm. Results of the search for species with A > 257 were negative. The recovery and chemical processing of kilograms of Hutch debris has resulted in the isolation of 10 10 atoms of 257Fm, which is 10 2 times more material than has been available for experimentation in the past. Experimentally significant amounts of other rare nuclides, e.g., : 254 Cf, 251 Cf, 255 -Es, and 250 Cm, have also been separated from the Hutch debris. The production of these nuclides in thermonuclear explosions is shown to be a valuable supplement to the AEC program for reactor production of transplutonium elements. The neutron flux achieved in Hutch was insufficient to even approach production of nuclides in the region of 298 114. A much more intense neutron flux is required. In future experiments, considerable attention must be given to the problem of adequate sample recovery, in order to properly use the ability to subject targets to an exceedingly intense time-integrated neutron flux. (author)

  16. The recovery and study of heavy nuclides produced in a nuclear explosion - the Hutch event

    Energy Technology Data Exchange (ETDEWEB)

    Hoff, R W; Hulet, E K [Lawrence Radiation Laboratory, University of California, Livermore, CA (United States)

    1970-05-15

    During the explosion of the Hutch device, the target ({sup 238}U and {sup 232}Th) was subjected to a very high neutron exposure, 2.4 x 10{sup 25} neutrons /cm{sup 2}. Multiple neutron capture reactions resulted in the production of heavy nuclides, up to and including 257Fm. Results of the search for species with A > 257 were negative. The recovery and chemical processing of kilograms of Hutch debris has resulted in the isolation of 10{sup 10} atoms of 257Fm, which is 10{sup 2} times more material than has been available for experimentation in the past. Experimentally significant amounts of other rare nuclides, e.g., :{sup 254}Cf, {sup 251}Cf, {sup 255}-Es, and {sup 250}Cm, have also been separated from the Hutch debris. The production of these nuclides in thermonuclear explosions is shown to be a valuable supplement to the AEC program for reactor production of transplutonium elements. The neutron flux achieved in Hutch was insufficient to even approach production of nuclides in the region of {sup 298}114. A much more intense neutron flux is required. In future experiments, considerable attention must be given to the problem of adequate sample recovery, in order to properly use the ability to subject targets to an exceedingly intense time-integrated neutron flux. (author)

  17. Catchment-wide weathering and erosion rates of mafic, ultramafic, and granitic rock from cosmogenic meteoric 10Be/9Be ratios

    Science.gov (United States)

    Dannhaus, N.; Wittmann, H.; Krám, P.; Christl, M.; von Blanckenburg, F.

    2018-02-01

    Quantifying rates of weathering and erosion of mafic rocks is essential for estimating changes to the oceans alkalinity budget that plays a significant role in regulating atmospheric CO2 levels. In this study, we present catchment-wide rates of weathering, erosion, and denudation measured with cosmogenic nuclides in mafic and ultramafic rock. We use the ratio of the meteoric cosmogenic nuclide 10Be, deposited from the atmosphere onto the weathering zone, to stable 9Be, a trace metal released by silicate weathering. We tested this approach in stream sediment and water from three upland forested catchments in the north-west Czech Republic. The catchments are underlain by felsic (granite), mafic (amphibolite) and ultramafic (serpentinite) lithologies. Due to acid rain deposition in the 20th century, the waters in the granite catchment exhibit acidic pH, whereas waters in the mafic catchments exhibit neutral to alkaline pH values due to their acid buffering capability. The atmospheric depositional 10Be flux is estimated to be balanced with the streams' dissolved and particulate meteoric 10Be export flux to within a factor of two. We suggest a correlation method to derive bedrock Be concentrations, required as an input parameter, which are highly heterogeneous in these small catchments. Derived Earth surface metrics comprise (1) Denudation rates calculated from the 10Be/9Be ratio of the "reactive" Be (meaning sorbed to mineral surfaces) range between 110 and 185 t km-2 y-1 (40 and 70 mm ky-1). These rates are similar to denudation rates we obtained from in situ-cosmogenic 10Be in quartz minerals present in the bedrock or in quartz veins in the felsic and the mafic catchment. (2) The degree of weathering, calculated from the fraction of 9Be released from primary minerals as a new proxy, is about 40-50% in the mafic catchments, and 10% in the granitic catchment. Lastly, (3) erosion rates were calculated from 10Be concentrations in river sediment and corrected for sorting

  18. Behavior of nuclides at plasma melting of TRU wastes

    International Nuclear Information System (INIS)

    Amakawa, Tadashi; Adachi, Kazuo

    2001-01-01

    Arc plasma heating technique can easily be formed at super high temperature, and can carry out stable heating without any effect of physical and chemical properties of the wastes. By focussing to these characteristics, this technique was experimentally investigated on behavior of TRU nuclides when applying TRU wastes forming from reprocessing process of used fuels to melting treatment by using a mimic non-radioactive nuclide. At first, according to mechanism determining the behavior of TRU nuclides, an element (mimic nuclide) to estimate the behavior was selected. And then, to zircaloy with high melting point or steel can simulated to metal and noncombustible wastes and fly ash, the mimic nuclide was added, prior to melting by using the arc plasma heating technique. As a result, on a case of either melting sample, it was elucidated that the nuclides hardly moved into their dusts. Then, the technique seems to be applicable for melting treatment of the TRU wastes. (G.K.)

  19. Mass measurements on short-lived Cd and Ag nuclides at the online mass spectrometer ISOLTRAP

    International Nuclear Information System (INIS)

    Breitenfeldt, Martin

    2009-01-01

    In the present work, mass determinations of the eleven neutron-deficient nuclides 99-109 Cd, of ten neutron-rich silver nuclides 112,114-121,123 Ag, and seven neutron-rich cadmium nuclides 114,120,122-124,126,128 Cd are reported. Due to the clean production of the neutron-deficient nuclides it was possible to reduce the experimental uncertainties down to 2 keV, whereas the measurements of neutron-rich nuclides were hampered by the presence of contaminations from more stable In and Cs nuclides. In the case of 99 Cd and 123 Ag the masses were determined for the first time and for the other nuclides the mass uncertainties could be reduced by up to a factor of 50 as in the case of 100 Cd. In the case of a potential isomeric mixture as for 115,117,119 Ag and 123 Cd, where no assignment to either the ground state or the excited state was possible, the experimental results were adjusted accordingly. Afterwards all results were included in the framework of the atomic-mass evaluation and thus linked and compared with other experimental data. In the case of a potential isomeric mixture as for 115,117,119 Ag and 123 Cd, where no assignment to either the ground state or the excited state was possible, the experimental results were adjusted accordingly. Afterwards all results were included in the framework of the atomic-mass evaluation and thus linked and compared with other experimental data. In the case of the neutron-deficient Cd nuclides a conflict between the mass values obtained in the present work and those published by the JYFLTRAP group [EEH + ] could be solved by performing an atomic-mass evaluation. Thus, it was revealed that reason for the conflict was a different value of the JYFLTRAP reference mass 96 Mo. Furthermore, a reduction of the mass uncertainty and a slight increase of the mass of 100 In were obtained. These mass measurements are an important step towards an understanding of the physics of the rp process that will enable a more reliable determination of

  20. Cosmogenic radioberyllium and background radiation dose to the general public

    International Nuclear Information System (INIS)

    Poeschl, M.; Ohera, M.

    2008-01-01

    To discover the causes of the presence of abnormal Be concentrations (anthropogenic or natural or cosmogenic source) in the area of the Kralicky Sneznik mountain massive (in the northeast of the Czech Republic, altitude of about 800 m), concentrations of 7 Be and 10 Be were also assayed in selected environmental components in the years of 2005 - 2007. The 10 Be concentrations in soils (80.39x10 6 - 210.45x10 6 atom g -1 ) and activity concentrations of 7 Be in soils and wet deposition were very low (1.3 - 5.3 Bq kg -1 and 0.6 - 4.5 Bq l -1 , resp.). However, activities of 7 Be in birch leaves and grass (dry matter) reached relatively high values (up to 1000 Bq kg -1 ) and, in addition, showed out their significant seasonal growth. In the work the probable contribution of the cosmogenic 7 Be activities to background radiation dose to the general public is discussed. (authors)

  1. Nuclide transfer test device in soil

    International Nuclear Information System (INIS)

    Sakata, Yoshiyuki.

    1994-01-01

    The device comprises a pressure-proof vessel having a perforated port, a compression vessel having a sample-containing chamber with circumferential walls having a plurality of small holes being gastightly engaged to the perforated port, a mechanically pressurizing means for vertically compressing the compression chamber, a pressurizing gas supply system for supplying a pressurizing gas to compress the soil specimen in a lateral direction and a sample water-supply system for supplying sample water to the sample containing chamber. The soil sample is pressurized so that the sample water is caused to permeate by isotropic pressure due to equilibrium of vertical compression by mechanical force and lateral compression by the pressurizing gas. The transfer state of radioactive nuclides in the soil can be tested easily in a state where the sample water is caused to permeate in a vertical direction in parallel, to simulate an actual processing circumstance. Namely, since the sample water is caused to permeate to the soil sample in the pressure-proof vessel, a desired test can easily be conducted in a restricted space without undergoing influences of the kind and the dose rate of the radioactive nuclides. (N.H.)

  2. Cosmogenic Radionuclides as an Extension of the Neutron Monitor Era into the Past: Potential and Limitations

    Science.gov (United States)

    Beer, J.; McCracken, K. G.; Abreu, J.; Heikkilä, U.; Steinhilber, F.

    2013-06-01

    The cosmogenic radionuclides, 10Be, 14C and others, provide a record of the paleo-cosmic radiation that extends >10,000 years into the past. They are the only quantitative means at our disposal to study the heliosphere prior to the commencement of routine sunspot observations in the 17th century. The cosmogenic radionuclides are primarily produced by secondary neutrons generated by the galactic cosmic radiation, and can be regarded, in a sense, as providing an extrapolation of the neutron monitor era into the past. However, their characteristics are quite different from the man-made neutron monitor in several important respects: (1) they are sensitive to somewhat lower cosmic ray energies; (2) their temporal resolution is ˜1 to 2 years, being determined by the rapidity with which they are sequestered in ice, biological, or other archives; (3) the statistical precision for annual data is very poor (˜19%); however it is quite adequate (˜5% for 22-year averages) to study the large variations (±40%) that have occurred in the paleo-cosmic ray record in the past between grand solar minima and maxima. The data contains "noise" caused by local meteorological effects, and longer-term climate effects, and the use of principal component analysis to separate these "system" effects from production effects is outlined. The concentrations of 10Be decreased by a factor of two at the commencement of Holocene, the present-day "interglacial", due to a 100% increase in the ice accumulation rates in polar regions. The use of the 10Be flux to study heliospheric properties during the last glacial is discussed briefly.

  3. Cosmogenic He and Ne in chondrules from clastic matrix and a lithic clast of Murchison: No pre-irradiation by the early sun

    Science.gov (United States)

    Riebe, My E. I.; Huber, Liliane; Metzler, Knut; Busemann, Henner; Luginbuehl, Stefanie M.; Meier, Matthias M. M.; Maden, Colin; Wieler, Rainer

    2017-09-01

    Whether or not some meteorites retain a record of irradiation by a large flux of energetic particles from the early sun in the form of excesses of cosmic-ray produced noble gases in individual crystals or single chondrules is a topic of ongoing debate. Here, we present He and Ne isotopic data for individual chondrules in Murchison, a chondritic regolith breccia of the CM group. We separated 27 chondrules from a clastic matrix portion and 26 chondrules from an adjacent single so-called "primary accretionary rock" (Metzler et al., 1992). All chondrules from the primary rock fragment are expected to share a common irradiation history, whereas chondrules from the clastic matrix were stirred in the regolith independently of each other. All "primary rock chondrules" and 23 of the "matrix chondrules" have very similar concentrations of cosmogenic 3He and 21Ne, corresponding to a cosmic-ray exposure age to galactic cosmic rays (GCR) of ∼1.3-1.9 Ma, in the range of Murchison's meteoroid exposure age determined with cosmogenic radionuclides. Four clastic matrix chondrules contain excesses of cosmogenic 3He and 21Ne, corresponding to nominal 4π exposure ages of ∼4-∼29 Ma, with a Ne isotopic composition as expected for production by GCR. If the fraction of excess cosmogenic gas bearing chondrules in the primary rock and clastic matrix were the same, we would expect this result with a statistical probability of only 0.5 - 2.7%. Therefore, the exposure age distributions for Murchison chondrules in primary rock and clastic matrix are very likely different. Such a difference is expected if the excess cosmogenic gas was acquired by some of the matrix chondrules in the regolith, but not if chondrules were irradiated in the solar nebula by the early sun before they accreted on the Murchison parent body. Therefore, Murchison does not provide evidence for irradiation by a high fluence of energetic particles from the early sun. By inference, this statement likely holds for the

  4. Distribution of transuranic nuclides in soils: a review

    International Nuclear Information System (INIS)

    Essington, E.H.; Fowler, E.B.

    1976-01-01

    The literature is reviewed to ascertain the degree of movement and the distribution patterns for transuranic and uranium nuclides in soils. Typical plutonium and uranium profiles are presented and an attempt is made to identify unique characteristics causing deviation from an ideal distribution pattern. By far most of the distribution observations are with plutonium and little is reported for uranium and other transuranic nuclides

  5. Timing of maximum glacial extent and deglaciation from HualcaHualca volcano (southern Peru), obtained with cosmogenic 36Cl.

    Science.gov (United States)

    Alcalá, Jesus; Palacios, David; Vazquez, Lorenzo; Juan Zamorano, Jose

    2015-04-01

    Andean glacial deposits are key records of climate fluctuations in the southern hemisphere. During the last decades, in situ cosmogenic nuclides have provided fresh and significant dates to determine past glacier behavior in this region. But still there are many important discrepancies such as the impact of Last Glacial Maximum or the influence of Late Glacial climatic events on glacial mass balances. Furthermore, glacial chronologies from many sites are still missing, such as HualcaHualca (15° 43' S; 71° 52' W; 6,025 masl), a high volcano of the Peruvian Andes located 70 km northwest of Arequipa. The goal of this study is to establish the age of the Maximum Glacier Extent (MGE) and deglaciation at HualcaHualca volcano. To achieve this objetive, we focused in four valleys (Huayuray, Pujro Huayjo, Mollebaya and Mucurca) characterized by a well-preserved sequence of moraines and roches moutonnées. The method is based on geomorphological analysis supported by cosmogenic 36Cl surface exposure dating. 36Cl ages have been estimated with the CHLOE calculator and were compared with other central Andean glacial chronologies as well as paleoclimatological proxies. In Huayuray valley, exposure ages indicates that MGE occurred ~ 18 - 16 ka. Later, the ice mass gradually retreated but this process was interrupted by at least two readvances; the last one has been dated at ~ 12 ka. In the other hand, 36Cl result reflects a MGE age of ~ 13 ka in Mollebaya valley. Also, two samples obtained in Pujro-Huayjo and Mucurca valleys associated with MGE have an exposure age of 10-9 ka, but likely are moraine boulders affected by exhumation or erosion processes. Deglaciation in HualcaHualca volcano began abruptly ~ 11.5 ka ago according to a 36Cl age from a polished and striated bedrock in Pujro Huayjo valley, presumably as a result of reduced precipitation as well as a global increase of temperatures. The glacier evolution at HualcaHualca volcano presents a high correlation with

  6. Some problems in utilization system of FP nuclides and actinides in the high level liquid wastes

    International Nuclear Information System (INIS)

    Ichiyanagi, Katsuaki; Emura, Satoru

    1974-01-01

    There are three nuclides of sup(134/137)Cs for irradiation sources, 90 Sr for radioisotope thermoelectric generators, and 238 Pu for cardiac pacemakers, as the nuclides for which considerable demand is expected in near future among those contained in reprocessed high level liquid wastes. Technical problems are first described from the viewpoint of utilization system. Then the control system of reprocessed high level wastes is expained. Finally, economic possibility and problems in their utilization are discussed. Being in competition with 60 Co, the price of sup(134/137)Cs will be lower than that of 60 Co after a decade. The annual demand in 1985 may be 6.1 x 10 6 Ci. The conclusive factor of 90 Sr market price is hard to get because it finds no strong competitive nuclides. It may be about 20 yen/Ci after ten years. Demand is expected to be approximately 1.2 x 10 7 Ci/year. However it is pretty hard to pay the cost of group separation and solidification, storage and conversion to products with such gain. It is estimated that the balance of income and outgo would be almost profitable, if the utilization of FP nuclides would progress and the demand three times as large as this assumption would be developed. (Wakatsuki, Y.)

  7. Contribution of some food categories on intakes of U, Th and other nuclides

    International Nuclear Information System (INIS)

    Shiraishi, Kunio

    1999-01-01

    The assessment of radiation dose in human from radioactive 232 Th, 238 U, 137 Cs, and 90 Sr are important because those nuclides are the largest contributors to committed internal doses. A market basket study was conducted to clarify the food pathways of the nuclides in Japanese subjects. Foodstuffs of 336 were purchased from markets in the vicinity of Mito-City during 1994-1995. Statistical consumption data were used for collection of the food samples. Thorium-232, 238 U, and stable isotope ( 133 Cs) in eighteen food groups were determined by inductively coupled mass spectrometry (ICP-MS). Radioisotopes ( 137 Cs) was analyzed by γ-spectrometry. Stable strontium ( 88 Sr) was also analyzed by inductively coupled atomic emission spectrometry (ICP-AES). Big contributors to the nuclide intakes in Japanese were as follows: 232 Th fishes and shellfishes (44%) and green vegetables (11%); 238 U seaweeds (50%) and fishes and shellfishes (26%); 88 Sr seaweeds (53%) and fishes and shellfishes (14%); 137 Cs mushrooms (17%), fishes and shell fishes (15%), milk products (11%), meats (9%), and potatoes (7%). The food categories of oil and fats, eggs and cooked meals were minor contributors in those nuclides. Dietary intake studies by using eighteen or more food categories should be effective procedure to resolve critical food and critical pathway for Japanese. Furthermore, critical pathways of radionuclides could be estimated by the analyses of stable isotopes. (author)

  8. Numerical solution of stiff burnup equation with short half lived nuclides by the Krylov subspace method

    International Nuclear Information System (INIS)

    Yamamoto, Akio; Tatsumi, Masahiro; Sugimura, Naoki

    2007-01-01

    The Krylov subspace method is applied to solve nuclide burnup equations used for lattice physics calculations. The Krylov method is an efficient approach for solving ordinary differential equations with stiff nature such as the nuclide burnup with short lived nuclides. Some mathematical fundamentals of the Krylov subspace method and its application to burnup equations are discussed. Verification calculations are carried out in a PWR pin-cell geometry with UO 2 fuel. A detailed burnup chain that includes 193 fission products and 28 heavy nuclides is used in the verification calculations. Shortest half life found in the present burnup chain is approximately 30 s ( 106 Rh). Therefore, conventional methods (e.g., the Taylor series expansion with scaling and squaring) tend to require longer computation time due to numerical stiffness. Comparison with other numerical methods (e.g., the 4-th order Runge-Kutta-Gill) reveals that the Krylov subspace method can provide accurate solution for a detailed burnup chain used in the present study with short computation time. (author)

  9. Reportable Nuclide Criteria for ORNL Radioactive Waste Management Activities - 13005

    International Nuclear Information System (INIS)

    McDowell, Kip; Forrester, Tim; Saunders, Mark

    2013-01-01

    The U.S. Department of Energy's Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee generates numerous radioactive waste streams. Many of those streams contain a large number of radionuclides with an extremely broad range of concentrations. To feasibly manage the radionuclide information, ORNL developed reportable nuclide criteria to distinguish between those nuclides in a waste stream that require waste tracking versus those nuclides of such minimal activity that do not require tracking. The criteria include tracking thresholds drawn from ORNL onsite management requirements, transportation requirements, and relevant treatment and disposal facility acceptance criteria. As a management practice, ORNL maintains waste tracking on a nuclide in a specific waste stream if it exceeds any of the reportable nuclide criteria. Nuclides in a specific waste stream that screen out as non-reportable under all these criteria may be dropped from ORNL waste tracking. The benefit of these criteria is to ensure that nuclides in a waste stream with activities which meaningfully affect safety and compliance are tracked, while documenting the basis for removing certain isotopes from further consideration. (authors)

  10. Distribution of transuranic nuclides in Mediterranean ecosystems

    International Nuclear Information System (INIS)

    Ballestra, S.; Thein, M.; Fukai, R.

    1982-01-01

    For the comprehensive understanding of the behaviour of transuranic elements in the marine environment, the knowledge on the distribution of these elements in various components of marine ecosystems is essential. Since the Mediterranean Sea is considered a sufficiently self-contained system, our approach for studying the processes controlling the transuranic cycling in the sea has been to follow, step by step, the redistribution of plutonium and americium in different components of the marine environment, taking Mediterranean ecosystems as examples. While the studies in the past years have supplied quantitative information on the inputs of plutonium and americium into the Mediterranean from atmospheric fallout and rivers as well as on their behaviour in the Mediterranean water column, only scattered data have been made available so far on the occurrence of the transuranic nuclides in the Mediterranean marine biota or sediments. In order to fill up this information gap, biological and sediment samples were collected from the northwestern Mediterranean region during 1975-1978 for the transuranic measurements. The results of these determinations are given in the present report

  11. A computer code for calculation of radioactive nuclide generation and depletion, decay heat and γ ray spectrum. FPGS90

    International Nuclear Information System (INIS)

    Ihara, Hitoshi; Katakura, Jun-ichi; Nakagawa, Tsuneo

    1995-11-01

    In a nuclear reactor radioactive nuclides are generated and depleted with burning up of nuclear fuel. The radioactive nuclides, emitting γ ray and β ray, play role of radioactive source of decay heat in a reactor and radiation exposure. In safety evaluation of nuclear reactor and nuclear fuel cycle, it is needed to estimate the number of nuclides generated in nuclear fuel under various burn-up condition of many kinds of nuclear fuel used in a nuclear reactor. FPGS90 is a code calculating the number of nuclides, decay heat and spectrum of emitted γ ray from fission products produced in a nuclear fuel under the various kinds of burn-up condition. The nuclear data library used in FPGS90 code is the library 'JNDC Nuclear Data Library of Fission Products - second version -', which is compiled by working group of Japanese Nuclear Data Committee for evaluating decay heat in a reactor. The code has a function of processing a so-called evaluated nuclear data file such as ENDF/B, JENDL, ENSDF and so on. It also has a function of making figures of calculated results. Using FPGS90 code it is possible to do all works from making library, calculating nuclide generation and decay heat through making figures of the calculated results. (author)

  12. A computer code for calculation of radioactive nuclide generation and depletion, decay heat and {gamma} ray spectrum. FPGS90

    Energy Technology Data Exchange (ETDEWEB)

    Ihara, Hitoshi; Katakura, Jun-ichi; Nakagawa, Tsuneo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1995-11-01

    In a nuclear reactor radioactive nuclides are generated and depleted with burning up of nuclear fuel. The radioactive nuclides, emitting {gamma} ray and {beta} ray, play role of radioactive source of decay heat in a reactor and radiation exposure. In safety evaluation of nuclear reactor and nuclear fuel cycle, it is needed to estimate the number of nuclides generated in nuclear fuel under various burn-up condition of many kinds of nuclear fuel used in a nuclear reactor. FPGS90 is a code calculating the number of nuclides, decay heat and spectrum of emitted {gamma} ray from fission products produced in a nuclear fuel under the various kinds of burn-up condition. The nuclear data library used in FPGS90 code is the library `JNDC Nuclear Data Library of Fission Products - second version -`, which is compiled by working group of Japanese Nuclear Data Committee for evaluating decay heat in a reactor. The code has a function of processing a so-called evaluated nuclear data file such as ENDF/B, JENDL, ENSDF and so on. It also has a function of making figures of calculated results. Using FPGS90 code it is possible to do all works from making library, calculating nuclide generation and decay heat through making figures of the calculated results. (author).

  13. Determination of Cross-Sections of Fast-Muon-Induced Reactions to Cosmogenic Radionuclides

    CERN Multimedia

    Hagner, T; Heisinger, B; Niedermayer, M; Nolte, E; Oberauer, L; Schonert, S; Kubik, P W

    2002-01-01

    %NA54 %title\\\\ \\\\We propose to measure cross-sections for fast muon-induced production of radionuclides. Firstly to study the contribution of fast-muon-induced reactions to the in-situ production of cosmogenic radionuclides in the lithosphere. Concrete is used to simulate the rock and to generate a secondary particle shower. The reaction channels to be measured are: C to $^{10}$Be, O to $^{10}$Be and $^{14}$C, Si to $^{26}$Al, S to $^{26}$Al, Ca to $^{36}$Cl, Fe to $^{53}$Mn and $^{205}$Tl to $^{205}$Pb. The energy dependent cross-section can be described by one single parameter $\\sigma_0$ and the energy dependence $\\rm\\overline{E}^{0.7}$ on the mean energy $\\rm\\overline{E}$. The irradiations of the targets is done at CERN. The produced radionuclides are measured by accelerator mass spectrometry in Munich and Zurich.\\\\ \\\\Secondly, muon induced signals can be a major source of background in experiments with low event rates located deep underground. We intent to study the produced radioactivity by fast-muon-ind...

  14. Square chart of nuclides with the best coordinates

    International Nuclear Information System (INIS)

    Wang Yuying

    2001-01-01

    It analyzes upper limiting feature of even Z=60-82 in different charts of nuclides. It has illustrated that the break line of upper limiting Z=60-82 in the chart of nucleus with proton number Z and neutron number N, parameters Z and H (=N-Z), two new parameters S(=2Z-N) and H, and parameters K (=S-H) and H, in proper order, it shows that the break line trends from the left lower to the right upper, the line alternates with horizontal and vertical, and the line trends from the right lower to the left upper. Here it finds that the square chart of nuclides places the middle among these charts. It shows that nuclei distribution is concentrated, so are scope of whole region of nuclides in the different charts of nuclides

  15. Radiometric dating by alpha spectrometry on uranium series nuclides

    NARCIS (Netherlands)

    Wijk, Albert van der

    1987-01-01

    De Engelse titel van dit proegschrift \\"Radiometric Dating by Alpha Spectometry on Uranium Series Nuclides\\" kan in het Nederlands wellicht het best worden weergegeven door \\"ouderdomsdbepalingen door stralingsmeting aan kernen uit de uraniumreeks met behulp van alfaspectometrie\\". In dit laatste

  16. The method study for nuclide analysis of waste drum

    International Nuclear Information System (INIS)

    Ruan Guanglin; Huang Xianguo; Xing Shixiong

    2001-01-01

    The principle of waste drum nuclide analysis system and the principle of the detector chosen are introduced. The linear attenuation coefficient and mass attenuation coefficient of five environmental medium (water, soil, red brick, concrete and sands) have been measured with γ transmission method simulative equipment. The absorption coefficient and nuclide activity of three measuring conditions (collimation-columnar source, un-collimation-columnar source, and un-collimation-rotation-drum source) have been calculated

  17. Catalogue of gamma rays from radionuclides ordered by nuclide

    International Nuclear Information System (INIS)

    Ekstroem, L.P.; Andersson, P.; Sheppard, H.M.

    1984-01-01

    A catalogue of about 28500 gamma-ray energies from 2338 radionuclides is presented. The nuclides are listed in order of increasing (A,Z) of the daughter nuclide. In addition the gamma-ray intensity per 100 decays of the parent (if known) and the decay half-life are given. All data are from a computer processing of a recent ENSDF (Evaluated Nuclear Structure Data File) file. (authors)

  18. [The fate of nuclides in natural water systems

    International Nuclear Information System (INIS)

    Turekian, K.K.

    1989-01-01

    Our research at Yale on the fate of nuclides in natural water systems has three components to it: the study of the atmospheric precipitation of radionuclides and other chemical species; the study of the behavior of natural radionuclides in groundwater and hydrothermal systems; and understanding the controls on the distribution of radionuclides and stable nuclides in the marine realm. In this section a review of our progress in each of these areas is presented

  19. Mass measurements on short-lived Cd and Ag nuclides at the online mass spectrometer ISOLTRAP

    Energy Technology Data Exchange (ETDEWEB)

    Breitenfeldt, Martin

    2009-07-03

    In the present work, mass determinations of the eleven neutron-deficient nuclides {sup 99-109}Cd, of ten neutron-rich silver nuclides {sup 112,114-121,123}Ag, and seven neutron-rich cadmium nuclides {sup 114,120,122-124,126,128}Cd are reported. Due to the clean production of the neutron-deficient nuclides it was possible to reduce the experimental uncertainties down to 2 keV, whereas the measurements of neutron-rich nuclides were hampered by the presence of contaminations from more stable In and Cs nuclides. In the case of {sup 99}Cd and {sup 123}Ag the masses were determined for the first time and for the other nuclides the mass uncertainties could be reduced by up to a factor of 50 as in the case of {sup 100}Cd. In the case of a potential isomeric mixture as for {sup 115,117,119}Ag and {sup 123}Cd, where no assignment to either the ground state or the excited state was possible, the experimental results were adjusted accordingly. Afterwards all results were included in the framework of the atomic-mass evaluation and thus linked and compared with other experimental data. In the case of a potential isomeric mixture as for {sup 115,117,119}Ag and {sup 123}Cd, where no assignment to either the ground state or the excited state was possible, the experimental results were adjusted accordingly. Afterwards all results were included in the framework of the atomic-mass evaluation and thus linked and compared with other experimental data. In the case of the neutron-deficient Cd nuclides a conflict between the mass values obtained in the present work and those published by the JYFLTRAP group [EEH{sup +}] could be solved by performing an atomic-mass evaluation. Thus, it was revealed that reason for the conflict was a different value of the JYFLTRAP reference mass {sup 96}Mo. Furthermore, a reduction of the mass uncertainty and a slight increase of the mass of {sup 100}In were obtained. These mass measurements are an important step towards an understanding of the physics of

  20. Possible cosmogenic neutrino constraints on Planck-scale Lorentz violation

    International Nuclear Information System (INIS)

    Mattingly, David M.; Maccione, Luca; Galaverni, Matteo; Liberati, Stefano; Sigl, Günter

    2010-01-01

    We study, within an effective field theory framework, O(E 2 M Pl 2 ) Planck-scale suppressed Lorentz invariance violation (LV) effects in the neutrino sector, whose size we parameterize by a dimensionless parameter η ν . We find deviations from predictions of Lorentz invariant physics in the cosmogenic neutrino spectrum. For positive O(1) coefficients no neutrino will survive above 10 19 eV. The existence of this cutoff generates a bump in the neutrino spectrum at energies of 10 17 eV. Although at present no constraint can be cast, as current experiments do not have enough sensitivity to detect ultra-high-energy neutrinos, we show that experiments in construction or being planned have the potential to cast limits as strong as η ν ∼ −4 on the neutrino LV parameter, depending on how LV is distributed among neutrino mass states. Constraints on η ν < 0 can in principle be obtained with this strategy, but they require a more detailed modeling of how LV affects the neutrino sector

  1. Possible cosmogenic neutrino constraints on Planck-scale Lorentz violation

    Energy Technology Data Exchange (ETDEWEB)

    Mattingly, David M. [New Hamshire Univ., Durham, NH (United States); Maccione, Luca [DESY Hamburg (Germany). Theory Group; Galaverni, Matteo [INAF-IASF Bologna (Italy); Liberati, Stefano [INFN, Trieste (Italy); SISSA, Trieste (Italy); Sigl, Guenter [Hamburg Univ. (Germany). II. Inst. fuer Theoretische Physik

    2009-11-15

    We study, within an effective field theory framework, O(E{sup 2}/M{sup 2}{sub Pl}) Planck-scale suppressed Lorentz invariance violation (LV) effects in the neutrino sector, whose size we parameterize by a dimensionless parameter {eta}{sub {nu}}. We find deviations from predictions of Lorentz invariant physics in the cosmogenic neutrino spectrum. For positive O(1) coefficients no neutrino will survive above 10{sup 19} eV. The existence of this cutoff generates a bump in the neutrino spectrum at energies of 10{sup 17} eV. Although at present no constraint can be cast, as current experiments do not have enough sensitivity to detect ultra-high-energy neutrinos, we show that experiments in construction or being planned have the potential to cast limits as strong as {eta}{sub {nu}}

  2. Studies in earth sciences using in-situ produced cosmogenic radioisotopes

    International Nuclear Information System (INIS)

    Fink, D.

    1998-01-01

    The geological processes of glaciation and surface weathering which have moulded and continue to shape our landscape, are inextricably related to the dynamics of climate change. Earth Scientists have long sought an analytical technique based on radiometric methods that would quantify both temporally and spatially, the chronology of glacial cycles and erosion rates. Such a technique is now developing based on the in-situ production by cosmic rays of the long-lived cosmogenic radionuclides 10 Be (T 1 / 2 =1.5 Ma), 26 Al (0.7 Ma) and 36 Cl (0.3a) in exposed rocks, surfaces and within the first meter or so of the Earth's crust. Although only a million atoms of 10 Be are produced during a 100 ka exposure period per gram of rock, AMS can be applied to measure this telltale signal. Their build-up over time can be utilised as radiometric clocks to elucidate the exposure history of geomorphic formations and surfaces. Alternatively, if exposure has been sufficiently long for the in-situ signal to reach equilibrium, an average erosion rate can be determined. The applicability of the technique depends on the radioisotope half-life - in simple terms it works best over exposure periods of 5ka to 5 Ma (for 10 Be) and can identify erosion rates from 0.1 to 10 mm/ka

  3. Retention of simulated fallout nuclides in agricultural crops. 1. Experiments on leys

    International Nuclear Information System (INIS)

    Eriksson, Aake; Rosen, K.; Haak, E.

    1998-01-01

    Experiments with artificial wet depositions of 134 Cs and 85 Sr during the growth period were carried out. The studies are complementary to the experiences after the Chernobyl fallout. The aim was to get a description of the relative transfer to the harvest products of new clover-grass leys and old grass leys after initial depositions of tracer nuclides at different times during the growth period. The reduction in transfer with time, from deposition to sampling, depends partly on dilution by growth and partly on fall-off to the ground. The reduction half-time for the nuclide content showed a range 10 - 14 days. The data obtained in the experiments can extend the basis for prediction of the consequences of fallout events at different times to new as well as to old leys in the field

  4. Fission-nuclide concentrations of ambient aerosol separated by size

    International Nuclear Information System (INIS)

    Csepregi, T.; Kovacs, L.; Maschek, I.; Szterjopulos, K.

    1984-01-01

    Examinations were carried on the radionuclides in aerosol deposited on filters of an air-conditioning plant with high air flow rate. For nuclide concentration of ambient air qualitative and quantitative analyses were made by gamma spectrometry. Methods have been developed for sample preparation, size fractionation by sedimentation technique and measurement of air flow. The collected aerosol particles was separated into five size fractions from 1 to 5 μm and the aerosol fractions were analysed. The mass/size distribution of the particles processed by sedimentation has been compared with that of the ambient aerosol separated by a slot impactor Hungarian type. Because the aggregation caused by the resuspensationtechnique would be assumed, electronmicrophotos were made on processed and unprocessed aerosols. On the basis of them the particle aggregation may be negligible. Otherwise, the derivation of concentration needs to know the exact air volume. For this aim the technical parameters of the aerodynamic system have also been measured in two different ways. The paper reports on the size dependence of fission products originating from the present global late fallout for a two years monitoring period. The results are compared with the daily beta activity concentration of aerosol samples taken by an other sampling unit. (Author)

  5. Modified microspheres for cleaning liquid wastes from radioactive nuclides

    International Nuclear Information System (INIS)

    Danilin, Lev; Drozhzhin, Valery

    2007-01-01

    An effective solution of nuclear industry problems related to deactivation of technological and natural waters polluted with toxic and radioactive elements is the development of inorganic sorbents capable of not only withdrawing radioactive nuclides, but also of providing their subsequent conservation under conditions of long-term storage. A successful technical approach to creation of sorbents can be the use of hollow aluminosilicate microspheres. Such microspheres are formed from mineral additives during coal burning in furnaces of boiler units of electric power stations. Despite some reduction in exchange capacity per a mass unit of sorbents the latter have high kinetic characteristics that makes it possible to carry out the sorption process both in static and dynamic modes. Taking into account large industrial resources of microspheres as by-products of electric power stations, a comparative simplicity of the modification process, as well as good kinetic and capacitor characteristics, this class of sorbents can be considered promising enough for solving the problems of cleaning liquid radioactive wastes of various pollution levels. (authors)

  6. Algorithm improvement program nuclide identification algorithm scoring criteria and scoring application.

    Energy Technology Data Exchange (ETDEWEB)

    Enghauser, Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-02-01

    The goal of the Domestic Nuclear Detection Office (DNDO) Algorithm Improvement Program (AIP) is to facilitate gamma-radiation detector nuclide identification algorithm development, improvement, and validation. Accordingly, scoring criteria have been developed to objectively assess the performance of nuclide identification algorithms. In addition, a Microsoft Excel spreadsheet application for automated nuclide identification scoring has been developed. This report provides an overview of the equations, nuclide weighting factors, nuclide equivalencies, and configuration weighting factors used by the application for scoring nuclide identification algorithm performance. Furthermore, this report presents a general overview of the nuclide identification algorithm scoring application including illustrative examples.

  7. Surface exposure history using in-situ cosmogenic 10Be, 26Al and 36Cl - applications to the Australian environment

    International Nuclear Information System (INIS)

    Fink, D.

    1999-01-01

    Production of the long-lived cosmogenic radionuclides, 10 Be (T 1/2 =1.5Ma), 26 Al (0.7Ma) and 36 Cl (0.3Ma), is dominated by the interaction of cosmic-rays with the upper atmosphere. They are also produced in exposed surface rocks and within the first meter or so of the Earth's crust. This is called in-situ production and although only a million atoms or so of 10 Be are produced within a ten thousand year exposure period per gram of surface rock, the technique of Accelerator Mass Spectrometry (AMS) can be applied to measure this tell-tale signal. The build-up over time of these radionuclides can be utilised as radiometric clocks to elucidate the exposure history of geomorphic formations and surfaces that have experienced some event or process that delivers previously unexposed material to cosmic-ray irradiation. Hence the reconstruction of glacial chronologies (ie time a bedrock surface was uncovered by ice retreat, or deposition age of glacial moraines), development of raised river terraces and paleo-beach ridges, age of meteorite impact craters and volcanic eruptions have been addressed with the in-situ method. Moreover, geomorphological processes of landscape evolution such as surface erosion rates, continental weathering, sediment transport and deposition, uplift rates can also be studied. The in-situ method is described along with examples of cosmogenic dating projects at ANSTO. It is estimated that it works best over the time period from 5 ka to 5 Ma and can identify erosion rates ranging from 0.1 to 10 mm/ka

  8. Rate of bedrock channel incision by waterfall retreat and landscape response constrained by cosmogenic 3He, Kauai, Hawaii

    Science.gov (United States)

    Mackey, B. H.; Lamb, M. P.; Scheingross, J. S.; Farley, K. A.

    2011-12-01

    Channel incision and knickpoint retreat are the drivers of landscape evolution, yet we are still challenged to quantify the rate and processes by which rivers cut into rock. The Napali Coast on the northwestern side of Kauai, Hawaii, has multiple linear channels incising >200 m into the shield volcano surface. The channels have well-constrained initial conditions, including original topography, and relatively uniform layered basalt of known age (~4.5 Ma), which have attracted previous studies of channel evolution (e.g., Seidl et al., 1994, 1997). Many channels feature prominent waterfalls, although the mechanism of knickpoint initiation (submarine landslide vs cliff erosion) and subsequent retreat remain ambiguous. Motivated by these knowledge gaps and recent advances in cosmogenic helium geochronology, we revisited the Kaulaula Valley, a 9 km long narrow valley, beheaded on its upslope extent by the Waimea Canyon, and ending near the coast at the northern Mana Plain. Four kilometers up the canyon is a prominent 40 m high vertical knickpoint, dividing the valley into strongly contrasting geomorphic domains. The boulder-lined channel below the knickpoint is linear, steep (15%), and confined to a narrow valley with steep rocky cliffs (average slope 31°). Large, >2 m diameter angular boulders in the lower section of channel show evidence of mobility from debris flows. Above the knickpoint, average channel gradient is reduced (9%), bed load is much finer, and convex, soil-mantled hillslopes have a consistently lower mean slope of 18°. We constrained the exposure age of 18 features (in-channel boulders, stable boulders on terraces, and in-channel bedrock) along the length of the channel, by analysis of cosmogenic 3He in olivine phenocrysts. Cosmogenic exposure ages are oldest near the coast (80 ka) and systematically decrease with upstream distance towards the waterfall (model of knickpoint retreat and downstream terrace abandonment advocated by Seidl (1997), and we

  9. Improvement of WWW chart of the nuclides interface

    International Nuclear Information System (INIS)

    Okamoto, Tsutomu; Minato, Futoshi; Iwamoto, Osamu; Koura, Hiroyuki

    2016-03-01

    The booklet 'chart of the nuclides' is issued every 4 years since 1976 from Nuclear Data Center, Japan Atomic Energy Agency. The chart of the nuclides for WWW (World Wide Web) was developed in 1999 in order to be available from the Internet browser. The Internet connection speeds, browser functions and JavaScript libraries has, however, progressed at present compared with the Internet technology in those days. In connection with the release of the 2014 edition of the chart of the nuclides, the interface of the WWW chart of the nuclides has been improved by introducing new Internet technologies aiming at enhancing convenience on accessibilities via browsers. We introduced a scrolling screen that would make capabilities of easy screen movement on a map with the addition of the drag scrolling function. Considering smart phone access, the light-weight edition which introduced automatic switch was prepared. The new system results in reduction in access time and usefulness in mobile environment. The method of making figures of the chart was reconsidered due to addition of new decay schemes to the 2014 edition. SVG (Scalable Vector Graphics) was adopted so as to make figures easily. It is concluded that the accessibilities of WWW chart of the nuclides are substantially improved from the previous version by introducing the new technologies. (author)

  10. Cosmic ray exposure dating with in situ produced cosmogenic 3He: results from young Hawaiian lava flows

    Science.gov (United States)

    Kurz, M.D.; Colodner, D.; Trull, T.W.; Moore, R.B.; O'Brien, K.

    1990-01-01

    In an effort to determine the in situ production rate of spallation-produced cosmogenic 3He, and evaluate its use as a surface exposure chronometer, we have measured cosmogenic helium contents in a suite of Hawaiian radiocarbon-dated lava flows. The lava flows, ranging in age from 600 to 13,000 years, were collected from Hualalai and Mauna Loa volcanoes on the island of Hawaii. Because cosmic ray surface-exposure dating requires the complete absence of erosion or soil cover, these lava flows were selected specifically for this purpose. The 3He production rate, measured within olivine phenocrysts, was found to vary significantly, ranging from 47 to 150 atoms g-1 yr-1 (normalized to sea level). Although there is considerable scatter in the data, the samples younger than 10,000 years are well-preserved and exposed, and the production rate variations are therefore not related to erosion or soil cover. Data averaged over the past 2000 years indicate a sea-level 3He production rate of 125 ?? 30 atoms g-1 yr-1, which agrees well with previous estimates. The longer record suggests a minimum in sea level normalized 3He production rate between 2000 and 7000 years (55 ?? 15 atoms g-1 yr-1), as compared to samples younger than 2000 years (125 ?? 30 atoms g-1 yr-1), and those between 7000 and 10,000 years (127 ?? 19 atoms g-1 yr-1). The minimum in production rate is similar in age to that which would be produced by variations in geomagnetic field strength, as indicated by archeomagnetic data. However, the production rate variations (a factor of 2.3 ?? 0.8) are poorly determined due to the large uncertainties in the youngest samples and questions of surface preservation for the older samples. Calculations using the atmospheric production model of O'Brien (1979) [35], and the method of Lal and Peters (1967) [11], predict smaller production rate variations for similar variation in dipole moment (a factor of 1.15-1.65). Because the production rate variations, archeomagnetic data

  11. Fukushima-derived fission nuclides monitored around Taiwan: Free tropospheric versus boundary layer transport

    Science.gov (United States)

    Huh, Chih-An; Hsu, Shih-Chieh; Lin, Chuan-Yao

    2012-02-01

    The 2011 Fukushima nuclear accident in Japan was the worst nuclear disaster following the 1986 Chernobyl accident. Fission products (nuclides) released from the Fukushima plant site since March 12, 2011 had been detected around the northern hemisphere in about two weeks and also in the southern hemisphere about one month later. We report here detailed time series of radioiodine and radiocesium isotopes monitored in a regional network around Taiwan, including one high-mountain and three ground-level sites. Our results show several pulses of emission from a sequence of accidents in the Fukushima facility, with the more volatile 131I released preferentially over 134Cs and 137Cs at the beginning. In the middle of the time series, there was a pronounced peak of radiocesium observed in northern Taiwan, with activity concentrations of 134Cs and 137Cs far exceeding that of 131I during that episode. From the first arrival time of these fission nuclides and their spatial and temporal variations at our sampling sites and elsewhere, we suggest that Fukushima-derived radioactive nuclides were transported to Taiwan and its vicinity via two pathways at different altitudes. One was transported in the free troposphere by the prevailing westerly winds around the globe; the other was transported in the planetary boundary layer by the northeast monsoon wind directly toward Taiwan.

  12. Role of Core-collapse Supernovae in Explaining Solar System Abundances of p Nuclides

    Science.gov (United States)

    Travaglio, C.; Rauscher, T.; Heger, A.; Pignatari, M.; West, C.

    2018-02-01

    The production of the heavy stable proton-rich isotopes between 74Se and 196Hg—the p nuclides—is due to the contribution from different nucleosynthesis processes, activated in different types of stars. Whereas these processes have been subject to various studies, their relative contributions to Galactic chemical evolution (GCE) are still a matter of debate. Here we investigate for the first time the nucleosynthesis of p nuclides in GCE by including metallicity and progenitor mass-dependent yields of core-collapse supernovae (ccSNe) into a chemical evolution model. We used a grid of metallicities and progenitor masses from two different sets of stellar yields and followed the contribution of ccSNe to the Galactic abundances as a function of time. In combination with previous studies on p-nucleus production in thermonuclear supernovae (SNIa), and using the same GCE description, this allows us to compare the respective roles of SNeIa and ccSNe in the production of p-nuclei in the Galaxy. The γ process in ccSN is very efficient for a wide range of progenitor masses (13 M ⊙–25 M ⊙) at solar metallicity. Since it is a secondary process with its efficiency depending on the initial abundance of heavy elements, its contribution is strongly reduced below solar metallicity. This makes it challenging to explain the inventory of the p nuclides in the solar system by the contribution from ccSNe alone. In particular, we find that ccSNe contribute less than 10% of the solar p nuclide abundances, with only a few exceptions. Due to the uncertain contribution from other nucleosynthesis sites in ccSNe, such as neutrino winds or α-rich freeze out, we conclude that the light p-nuclides 74Se, 78Kr, 84Sr, and 92Mo may either still be completely or only partially produced in ccSNe. The γ-process accounts for up to twice the relative solar abundances for 74Se in one set of stellar models and 196Hg in the other set. The solar abundance of the heaviest p nucleus 196Hg is

  13. Nuclide Inventory Calculation Using MCNPX for Wolsung Unit 1 Reactor Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    Rabir, Mohamad Hairie; Noh, Kyoung Ho; Hah, Chang Joo [KEPCO International Nuclear Graduate School, Daejeon (Korea, Republic of)

    2014-05-15

    The CINDER90 computation process involves utilizing linear Markovian chains to determine the time dependent nuclide densities. The CINDER90 depletion algorithm is implemented the MCNPX code package. The coupled depletion process involves a Monte-Carlo steady-state reaction rate calculation linked to a deterministic depletion calculation. The process is shown in Fig.1. MCNPX runs a steady state calculation to determine the system eigenvalue collision densities, recoverable energies from fission and neutrons per fission events. In order to generate number densities for the next time step, the CINDER90 code takes the MCNPX generated values and performs a depletion calculation. MCNPX then takes the new number densities and caries out a new steady-stated calculation. The process repeats itself until the final time step. This paper describe the preliminary source term and nuclide inventory calculation of Candu single fuel channel using MCNPX, as a part of the activities to support the equilibrium core model development and decommissioning evaluation process of a Candu reactor. The aim of this study was to apply the MCNPX code for source term and nuclide inventory calculation of Candu single fuel channel. Nuclide inventories as a function of burnup will be used to model an equilibrium core for Candu reactor. The core lifetime neutron fluence obtained from the model is used to estimate radioactivity at the stage of decommisioning. In general, as expected, the actinides and fission products build up increase with increasing burnup. Despite the fact that the MCNPX code is still in development we can conclude that the code is capable of obtaining relevant results in burnup and source term calculation. It is recommended that in the future work, the calculation has to be verified on the basis of experimental data or comparison with other codes.

  14. Variable temperature effects on release rates of readily soluble nuclides

    International Nuclear Information System (INIS)

    Kim, C.-L.; Light, W.B.; Lee, W.W.-L.; Chambre, P.L.; Pigford, T.H.

    1988-09-01

    In this paper we study the effect of temperature on the release rate of readily soluble nuclides, as affected by a time-temperature dependent diffusion coefficient. In this analysis ground water fills the voids in the waste package at t = 0 and one percent of the inventories of cesium and iodine are immediately dissolved into the void water. Mass transfer resistance of partly failed container and cladding is conservatively neglected. The nuclides move through the void space into the surrounding rock under a concentration gradient. We use an analytic solution to compute the nuclide concentration in the gap or void, and the mass flux rate into the porous rock. 8 refs., 4 figs

  15. Nuclide migration from a bedrock repository for spent fuel

    International Nuclear Information System (INIS)

    Grundfelt, B.

    1978-08-01

    A study of the migration of radionuclides from a repository for spent, unprocessed fuel is presented. The study makes use of a unidimensional dispersion model developed at BNWL. The results show that a number of nuclides decay significantly during the migration. The doses to future man was calculated in a separate study performed at Studsvik. The dose calculations are based on the activity in-flows, presented in this report, and show that the predominant dose contribution comes from the nuclide radium-226. This nuclide is formed mainly by the decay of uranium-238 which means that the main part of the dose would arise even from a repository for non-irradiated fuel

  16. The stochastic nuclide transport model for buffer/backfill materials

    International Nuclear Information System (INIS)

    Ma Liping; Han Yongguo

    2014-01-01

    Currently, study on nuclide migration law in geological disposal repository of high level waste is assumed buffer/backfill layer to be continuous medium, utilized the continuity equation, equation of state, the equations of motion, etc, formed a set of theory and method to estimate nuclide concentration distribution in buffer/backfill layer, and provided an important basis for nuclide migration rules of repository. However, it is necessary to study the buffer/backfill layer microstructure and subtly describe the pore structure and fracture system of the buffer/backfill layer, and reflect the changes in connectivity and in different directions of the buffer/backfill layer. Through using random field theory, the nuclide transport for the buffer/backfill layer in geological disposal repository of nuclear waste is described in the paper. This paper mainly includes that, t represents the time, ξ t ⊂ Z d = d represents the integer lattice, Z represents collectivity integers, d = l, 2, 3, for instance, d = 2, Z d = {(m, n) : m, n ∈ Z} the state point of ξ t is typically considered to be occupied by the nuclide concentration values of the buffer/backfill layer, ξ t also represents random set in the diagram of two dimensional integer lattice, namely, t ∈ [0, T], {ξ t ,0 ≤ t ≤ ⊂ T} Consequently, according to the stochastic process obtained above, the changes of the nuclide concentration values of the buffer/backfill layer or the buffer/backfill laboratory materials in the repository with the time can be known. (authors)

  17. Radioactive consumer products

    International Nuclear Information System (INIS)

    Sato, Otomaru

    1981-01-01

    Present situation of utilizing the radioactive consumer products and exposure dose were reviewed with published data. Practically, consumer products are divided into three categories, (1) radioactive nuclides intentionally incorporated into radioluminous dye, ionization chambers for smoke detector, eliminator of static electricity, and glow lamp (2) natural radioactive nuclides contained in false teeth, porcelain, glass, and gas mantle (3) natural radioactive nuclides accumulated as industrial waste at the consumption of coal, petroleum, and natural gas or in fertilizer and materials for construction. (Nakanishi, T.)

  18. Radioactive-nuclide decay data in science and technology

    International Nuclear Information System (INIS)

    Reich, C.W.; Helmer, R.G.

    1975-01-01

    The scope of ENDF/B has recently been expanded to include radioactive-nuclide decay data. In this paper, the content and organization of the decay data which are included in ENDF/B are presented and discussed. The application of decay data in a wide variety of nuclear-related activities is illustrated by a number of examples. Two items pointed up by the ENDF/B decay-data compilation effort are treated: the identification of deficiencies in the data; and the importance of a radioactive-nuclide metrology effort oriented toward supplying these needs in a systematic fashion. 3 figures, 2 tables

  19. Radioactive-nuclide decay data in science and technology

    International Nuclear Information System (INIS)

    Reich, C.W.; Helmer, R.G.

    1975-01-01

    The scope of ENDF/B has recently been expanded to include radioactive-nuclide decay data. In this paper, the content and organization of the decay data which are included in ENDF/B are presented and discussed. The application of decay data in a wide variety of nuclear-related activities is illustrated by a number of examples. Two items pointed up by the ENDF/B decay-data compilation effort are treated: the identification of deficiencies in the data; and the importance of a radioactive-nuclide metrology effort oriented toward supplying these needs in a systematic fashion. (3 figures, 1 table)

  20. Extraction of in situ cosmogenic 14C from olivine

    Science.gov (United States)

    Pigati, J.S.; Lifton, N.A.; Timothy, Jull A.J.; Quade, Jay

    2010-01-01

    Chemical pretreatment and extraction techniques have been developed previously to extract in situ cosmogenic radiocarbon (in situ 14C) from quartz and carbonate. These minerals can be found in most environments on Earth, but are usually absent from mafic terrains. To fill this gap, we conducted numerous experiments aimed at extracting in situ 14C from olivine ((Fe,Mg)2SiO4). We were able to extract a stable and reproducible in situ 14C component from olivine using stepped heating and a lithium metaborate (LiBO2) flux, following treatment with dilute HNO3 over a variety of experimental conditions. However, measured concentrations for samples from the Tabernacle Hill basalt flow (17.3 ?? 0.3 ka4) in central Utah and the McCarty's basalt flow (3.0 ?? 0.2 ka) in western New Mexico were significantly lower than expected based on exposure of olivine in our samples to cosmic rays at each site. The source of the discrepancy is not clear. We speculate that in situ 14C atoms may not have been released from Mg-rich crystal lattices (the olivine composition at both sites was ~Fo65Fa35). Alternatively, a portion of the 14C atoms released from the olivine grains may have become trapped in synthetic spinel-like minerals that were created in the olivine-flux mixture during the extraction process, or were simply retained in the mixture itself. Regardless, the magnitude of the discrepancy appears to be inversely proportional to the Fe/(Fe+Mg) ratio of the olivine separates. If we apply a simple correction factor based on the chemical composition of the separates, then corrected in situ 14C concentrations are similar to theoretical values at both sites. At this time, we do not know if this agreement is fortuitous or real. Future research should include measurement of in situ 14C concentrations in olivine from known-age basalt flows with different chemical compositions (i.e. more Fe-rich) to determine if this correction is robust for all olivine-bearing rocks. ?? 2010 by the Arizona

  1. Fluvial terrace dating using in situ cosmogenic {sup 21}Ne

    Energy Technology Data Exchange (ETDEWEB)

    Sexton, E. [Univ. of Illinois, Chicago, IL (United States); Caffee, M. [Lawrence Livermore National Lab., CA (United States)

    1994-12-01

    Through the analysis of cosmic-ray produced radio-genic and stable nuclide concentrations, specifically {sup 21}Ne, we hope to date certain geomorphic features located along the tributaries of the Colorado River in the Eastern Grand Canyon and the Rainbow Plateau located in Utah. During the Quaternary, the Colorado River system was fed by glacial melting and run-off from the Wind River and Colorado Mountain Ranges. Past periods of aggradation allowed the emplacement of terrace features from debris flow activity. By dating such features we can further constrain the timing of key events such as river down cutting, terrace genesis/exposure age, and rates of surface erosion. Knowing the age and elevation of each terrace we can determine an average rate of down cutting of this river system. This, in turn, will offer information regarding alpine glaciation which is a sensitive indicator of global climate change. Studying the relative concentrations of these isotopic species in surface rocks can be useful in researching glacial periodicity and the relationship between solar activity and climate.

  2. A nuclear data library for activity determinations of selected nuclides

    International Nuclear Information System (INIS)

    Baard, J.H.

    1991-11-01

    This report describes the GAMLIB 1-5 library, which is used in the calculation of the activity of radionuclides present in the gamma-ray spectra of irradiated neutron fluence detectors. The library contains all constants needed to calculate the activity for reactions normally applied in neutron fluence determinations, performed in irradiation experiments in the HFR. It also contains the nuclide constants for the activity calculation of gamma-ray measurements of U and Pu samples. The library consists of two kinds of tables, the first containing gamma-ray energies and gamma-ray emission probabilities with their uncertainties and the nuclide code, the other the nuclide code, decay constant, gamma -ray energies and gamma-ray emission probabilities. No cross-section data are stored in this library. All the relevant dat of the Nuclear Data Guide (Dordrecht, Kluwer 1989) have been used as base for this library. Other data have been obtained from recent literature. This library comprises 155 nuclides and 1115 gamma-ray energies. (author). 9 refs

  3. Retardation of escaping nuclides from a final depository

    International Nuclear Information System (INIS)

    Neretnieks, I.

    1977-09-01

    study has been made on retardation of radionuclides in various materials, which could be suited for use in the final repository. A literature survey has shown that except for Cs and Sr very little is known on ion exchange equilibria in ground water surroundings. Measurements were made to determine equilibrium data for Cs, Sr, Eu and U in five natural zeolites, which could be used as filling material. Diffusivities in zeolite particles and bbeds as well as clay beds were also determined. With the aid of these data the function of the ion exchange barrier was investigated. The barrier is so short that the nuclide transport is by diffusion. An 0.2 m barrier of a zeolite will delay Cs and Sr so long that they will decay totally. Am 241 will also be considerably delayed. An 0.2 m clay-quartz barrier will have very little effect on these nuclides. A 1 m clay-quartz barrier will have about the same effect as an 0.2 m zeolite barrier. Most other nuclides have so long lives that they will only be delayed, but not sufficiently long to decay. He rock itself interacts with many of the radionuclides. A simple model has been made to describe the nuclide retardation and dispersion in fissured rock. With the aid of this, tracer experiments in actual underground rock have been analysed

  4. U-Th series nuclides in the Gulf of Mexico

    International Nuclear Information System (INIS)

    Scott, M.R.

    1981-01-01

    A study of U and Th series nuclides is being conducted on sediments from the Gulf of Mexico. Uranium concentrations as a function of depth have been determined, as well as changes in the 234 U/ 238 U activity ratio. The geochemical behavior of uranium in shelf sediments is discussed

  5. Evaluation of Nuclide Release Scenarios for a Hypothetical LILW Repository

    International Nuclear Information System (INIS)

    Lee, Youn Myoung; Jeong, Jong Tae

    2010-11-01

    A program for the safety assessment and performance evaluation of a low- and intermediate-level radioactive waste (LILW) repository system has been developed. Utilizing GoldSim (GoldSim, 2006), the program evaluates nuclide release and transport into the geosphere and biosphere under various disruptive natural and manmade events and scenarios that can occur after a waste package failure. We envisaged and illustrated these events and scenarios as occurring after the closure of a hypothetical LILW repository, and they included the degradation of various manmade barriers, pumping well drilling, and natural disruptions such as the sudden formation of a preferential flow pathway in the far-field area of the repository. Possible enhancement of nuclide transport facilitated by colloids or chelating agents is also dealt with. We used the newly-developed GoldSim template program, which is capable of various nuclide release scenarios and is greatly suited for simulating a potential repository given the geological circumstances in Korea, to create the detailed source term and near-field release scheme, various nuclide transport modes in the far-field geosphere area, and the biosphere transfer. Even though all parameter values applied to the hypothetical repository were assumed, the illustrative results, particularly the probabilistic calculations and sensitivity studies, may be informative under various scenarios

  6. Sampling of soils for transuranic nuclides: a review

    International Nuclear Information System (INIS)

    Fowler, E.B.; Essington, E.H.

    1977-01-01

    A review of the literature pertinent to the sampling of soils for radionuclides is presented; emphasis is placed on transuranic nuclides. Sampling of soils is discussed relative to systems of heterogeneous distributions and varied particle sizes encountered in certain environments. Sampling methods that have been used for two different sources of contamination, global fallout, and accidental or operational releases, are included

  7. The analyses of measured nuclide concentration in project ISTC 2670

    International Nuclear Information System (INIS)

    Chrapciak, V.

    2006-01-01

    In this article are analyzed experiments for WWER-440 fuel and compared with theoretical results by new version of the SCALE 5 code: nuclide compositions - measurement in Kurchatov institute for 3.6% - measurement in Dimitrovgrad for 3.6% (project ISTC 2670) The focus is on modules TRITON and ORIGEN-S (Authors)

  8. IVO's nuclide removal system takes to the road

    International Nuclear Information System (INIS)

    Tusa, E.H.

    1995-01-01

    The successful and routine use of IVO's treatment system for the removal of cesium from the evaporator concentrates at the Loviisa WER plant in Finland is described. The system uses a granular inorganic hexacyanoferate-based ion exchanger to separate cesium from liquid radioactive wastes. The compactness of the original systems at Loviisa suggested the development of a transportable unit. A combined nuclide removal system was created which included a highly efficient ultrafiltration unit to separate nearly all particulate material carrying radionuclides, as well as the cesium removal capability. A 20ft long container carrying the removal package was completed in 1994. This NUclide REmoval System (NURES) was used for the first time in January 1995 to purify liquid waste accumulating at training reactors in Estonia and has performed well. As an extension of nuclide removal, a process has been created to recover boron from liquid wastes. A system for boron recovery and nuclide removal has been designed for use at the Paks plant in Hungary. The removal process has been shown to improve the safety of final waste disposal compared with the alternative treatment by cementation because the cesium is very tightly bound into the ion exchange material. (UK)

  9. Measurement of soluble nuclide dissolution rates from spent fuel

    International Nuclear Information System (INIS)

    Wilson, C.N.; Gray, W.J.

    1990-01-01

    Gaining a better understanding of the potential release behavior of water-soluble radionuclides is the focus of new laboratory spent fuel dissolution studies being planned in support of the Yucca Mountain Project. Previous studies have suggested that maximum release rates for actinide nuclides, which account for most of the long-term radioactivity in spent fuel, should be solubility-limited and should not depend on the characteristics or durability of the spent fuel waste form. Maximum actinide concentrations should be sufficiently low to meet the NRC (Nuclear Regulatory Commission) annual release limits. Potential release rates for soluble nuclides such as 99 Tc, 135 Cs, 14 C and 129 I, which account for about 1-2% of the activity in spent fuel at 1,000 years, are less certain and may depend on processes such as oxidation of the fuel in the repository air environment. Dissolution rates for several soluble nuclides have been measured from spent fuel specimens using static and semi-static methods. However, such tests do not provide a direct measurement of fuel matrix dissolution rates that may ultimately control soluble-nuclide release rates. Flow-through tests are being developed as a potential supplemental method for determining the matrix component of soluble-nuclide dissolution. Advantages and disadvantages of both semi-static and flow-through methods are discussed. Tests with fuel specimens representing a range of potential fuel states that may occur in the repository, including oxidized fuel, are proposed. Preliminary results from flow-through tests with unirradiated UO 2 suggesting that matrix dissolution rates are very sensitive to water composition are also presented

  10. Geographical distribution of radioactive nuclides released from the Fukushima Daiichi Nuclear Power Station accident in eastern Japan

    International Nuclear Information System (INIS)

    Ishida, Masanobu; Umetsu, Kohei; Sugimoto, Miyabi; Yamaguchi, Yuta; Yamazaki, Hideo; Nakagawa, Ryota

    2013-01-01

    The geographical distribution of radioactive nuclides released from the Fukushima Daiichi Nuclear Power Station accident in metropolitan areas located in eastern Japan was investigated. The radioactive contamination of environmental samples, including soil and biological materials, was analyzed. The concentrations of 131 I, 134 Cs, and 137 Cs in the soil samples collected from Fukushima City were 122000, 11500 and 14000 Bq/kg on 19th March 2011 and 129000, 11000 and 13700 Bq/kg on 26th March 2011, for the three nuclides respectively. The concentrations of 131 I, 134 Cs and 137 Cs in the soil samples collected from March-June 2011 from study sites ranged from 240 to 101000, 28 to 26200, and 14 to 33700 Bq/kg, respectively. In Higashiosaka City, it began to detect those radioactive nuclides in the atmospheric airborne dust from 25th March. Radioactive fission products 95 Zr- 95 Nb were detected on 18th April 2011. Biological samples collected from Tokyo Bay were studied. The maximum concentrations of 134 Cs and 137 Cs detected in the biological samples were 12.2 and 19.2 Bq/kg, which were measured in goby. 131 I was not detected in the biological samples however, trace amounts of the short half-life nuclide 110m Ag were found in the shellfish samples. (author)

  11. Seismic Supercycles of Normal Faults in Central Italy over Various Time Scales Revealed by 36Cl Cosmogenic Dating

    Science.gov (United States)

    Benedetti, L. C.; Tesson, J.; Perouse, E.; Puliti, I.; Fleury, J.; Rizza, M.; Billant, J.; Pace, B.

    2017-12-01

    The use of 36Cl cosmogenic nuclide as a paleoseismological tool for normal faults in the Mediterranean has revolutionized our understanding of their seismic cycle (Gran Mitchell et al. 2001, Benedetti et al. 2002). Here we synthetized results obtained on 13 faults in Central Italy. Those records cover a period of 8 to 45 ka. The mean recurrence time of retrieved seismic events is 5.5 ±6 ka, with a mean slip per event of 2.5 ± 1.8 m and a mean slip-rate from 0.1 to 2.4 mm/yr. Most retrieved events correspond to single events according to scaling relationships. This is also supported by the 2 m-high co-seismic slip observed on the Mt Vettore fault after the October 30, 2016 M6.5 earthquake in Central Italy (EMERGEO working group). Our results suggest that all faults have experienced one or several periods of slip acceleration with bursts of seismic activity, associated with very high slip-rate of 1.7-9 mm/yr, corresponding to 2-20 times their long-term slip-rate. The duration of those bursts is variable from a fault to another (from recurrence time. This might suggest that the seismic activity of those faults could be controlled by their intrinsic properties (e.g. long-term slip-rate, fault-length, state of structural maturity). Our results also show events clustering with several faults rupturing in less than 500 yrs on adjacent or distant faults within the studied area. The Norcia-Amatrice seismic sequence, ≈ 50 km north of our study area, also evidenced this clustering behaviour, with over the last 20 yrs several successive events of Mw 5 to 6.5 (from north to south: Colfiorito 1997 Mw6.0, Norcia 2016 Mw6.5, L'Aquila 2009 Mw6.3), rupturing various fault systems, over a total length of ≈100 km. This sequence will allow to better understand earthquake kinematics and spatiotemporal slip distribution during those seismic bursts.

  12. Radioactive equilibria and disequilibria of U-series nuclides in erupting magmas from Izu arc volcanoes

    International Nuclear Information System (INIS)

    Sato, Jun; Kurihara, Yuichi; Takahashi, Masaomi

    2009-01-01

    Radioactive disequilibria among U-series nuclides are observed in the magmas from volcanoes in the world. Basaltic products from Izu arc volcanoes, including Izu-Oshima and Fuji volcanoes, show 230 Th 238 U and 226 Ra> 230 Th disequilibria, indicating that the addition of U-and Ra-rich fluid from the subducting slab to the mantle wedge at the magma genesis. The disequilibria of 226 Ra> 230 Th in the erupting magmas suggest that the timescale from magma genesis to the eruption may be less than 8000 years. (author)

  13. Release of segregated nuclides from spent fuel

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, L.H.; Tait, J.C. [Atomic Energy Canada Ltd., Pinawa, MB (Canada). Whiteshell Laboratories

    1997-10-01

    The potential release of fission and activation products from spent nuclear fuel into groundwater after container failure in the Swedish deep repository is discussed. Data from studies of fission gas release from representative Swedish BWR fuel are used to estimate the average fission gas release for the spent fuel population. Information from a variety of leaching studies on LWR and CANDU fuel are then reviewed as a basis for estimating the fraction of the inventory of key radionuclides that could be released preferentially (the Instant Release Fraction of IRF) upon failure of the fuel cladding. The uncertainties associated with these estimates are discussed. 33 refs, 6 figs, 3 tabs.

  14. Capability of minor nuclide confinement in fuel reprocessing

    International Nuclear Information System (INIS)

    Fujine, Sachio; Uchiyama, Gunzo; Mineo, Hideaki; Kihara, Takehiro; Asakura, Toshihide

    1999-01-01

    Experiment with spent fuels has started with the small scale reprocessing facility in NUCEF-BECKY αγ cell. Primary purpose of the experiment is to study the capability of long-lived nuclide confinement both in the PUREX flow sheet applied to the large scale reprocessing plant and also in the PARC (Partitioning Conundrum key process) flow sheet which is our proposal as a simplified reprocessing of one cycle extraction system. Our interests in the experiment are the behaviors of minor long-lived nuclides and the behaviors of the heterogeneous substances, such as sedimentation in the dissolver, organic cruds in the extraction banks. The significance of those behaviors will be assessed from the standpoint of the process safety of reprocessing for high burn-up fuels and MOX fuels. (author)

  15. A GoldSim Model for Colloid Facilitated Nuclide Transport

    International Nuclear Information System (INIS)

    Lee, Youn Myoung; Jeong, Jong Tae

    2010-01-01

    Recently several total system performance assessment (TSPA) programs, called 'template' programs, ready for the safety assessment of radioactive waste repository systems which are conceptually modeled have been developed by utilizing GoldSim and AMBER at KAERI. It is generally believed that chelating agents (chelators) that could be disposed of together with radioactive wastes in the repository and natural colloids available in the geological media affect on nuclides by enhancing their transport in the geological media. A simple GoldSim module to evaluate such quantitative effects, by which colloid and chelator-facilitated nuclide release cases could be modeled and evaluated is introduced. Effects of the chelators alone are illustrated with the case associated with well pumping scenario in a hypothetical repository system

  16. One Isotope, Two Tales: using plant and cosmogenic 14C to constrain Holocene glacier activity on Baffin Island.

    Science.gov (United States)

    Pendleton, S.; Miller, G. H.; Lifton, N. A.; Young, N. E.

    2017-12-01

    As the cryosphere continues to undergo rapid and accelerating change, it is more important than ever to understand past glacier activity to predict the future of the cryosphere. However, continuous Holocene glacier records are notoriously difficult to reconstruct because an advancing glacier will re-incorporate previous deposits so that moraines typically only record the farthest downvalley glacier expansion. Here we combine dates of ice margin advance from in situ dead vegetation with in situ cosmogenic 14C (in situ 14C) from preserved bedrock surfaces at the same locations to further constrain the timing of ice-free episodes during the Holocene following deglaciation on southern Baffin Island. Radiocarbon ages from recently exposed in situ plants suggest that ice last advanced over sample locations at 9.4, 9.2, 9.0, and 3.7 ka and that they remained ice covered until modern times. Associated in situ 14C inventories are variable, but well above background levels, suggesting some amount of Holocene in situ 14C production. Using plant 14C ages representing the beginning of ice coverage and in situ 14C inventories representative of exposure prior to ice coverage, a simple model of cosmogenic in situ 14C production (accounting for muon production through ice) provides constraints timing and duration of ice-free times at sample locations prior to their most recent burial. Using conservative Holocene ice thicknesses, the locations buried at 9.4, 9.2, and 9.0 ka require, at minimum, 1000 years of pre-burial exposure to match the observed in situ 14C inventory. This suggests these locations were ice free by at least 10 ka and likely earlier. The in situ 14C inventory at the location buried at 3.7 ka limits prior exposure to 2000 years, suggesting that this location experienced more complex Holocene ice cover/burial history. These pilot data show that valuable information regarding periods of exposure is contained within in situ 14C inventories. Additional paired plant and

  17. Analytical approach to the evaluation of nuclide transmutations

    International Nuclear Information System (INIS)

    Vukadin, Z.; Osmokrovic, P.

    1995-01-01

    Analytical approach to the evaluation of nuclide concentrations in a transmutation chain is presented. Non singular Bateman coefficients and depletion functions are used to overcome numerical difficulties when applying well-known Bateman solution of a simple radioactive decay. Method enables evaluation of complete decay chains without elimination of short lived radionuclides. It is efficient and accurate. Practical application of the method is demonstrated by computing the neptunium series inventory in used Candu TM fuel. (author)

  18. Hot demonstration of proposed commercial nuclide removal technology

    International Nuclear Information System (INIS)

    Lee, D.

    1996-01-01

    This task covers the development and operation of an experimental test unit located in a Building 4501 hot cell within Building 4501 at Oak Ridge National Laboratory (ORNL). This equipment is designed to test radionuclides removal technologies under continuous operatoin on actual ORNL Melton Valley Storage Tank (MVST) supernatant, Savannah River high-level waste supernatant, and Hanford supernatant. The latter two may be simulated by adding the appropriate chemicals and/or nuclides to the MVST supernatant

  19. Long-term behaviour of radioactive nuclides in the environment

    International Nuclear Information System (INIS)

    Brechignac, F.; Moberg, L.; Suomela, M.

    1999-01-01

    Report of recent advances in Europe, regarding the long-term development of radioactive nuclides in the environment. The corresponding scientific findings from three projects - Peace, Landscape and Epora (involving 18 European laboratories) - have been collected together. These projects were managed by the IPSN for the European Commission (DG XII) in the framework of the programme 'Surete de la fission nucleaire' (Nuclear fission safety programme). (author)

  20. Measurement of radioactive nuclides in the `Mayak` region

    Energy Technology Data Exchange (ETDEWEB)

    Myasoedov, B F [V.I. Vernadsky Inst. of Geochemistry and Analytical Chemistry, Russian Academy of Sciences, Moscow (Russian Federation); Novikov, A P [V.I. Vernadsky Inst. of Geochemistry and Analytical Chemistry, Russian Academy of Sciences, Moscow (Russian Federation)

    1997-03-01

    The study of environmental contamination caused by anthropogenic impact and, primarily, by radioactive nuclides is one of the main scientific problems facing contemporary science. Radioecological monitoring, decision making on remediation of polluted areas need detailed information about distribution of radioactive nuclides in the terrestrial and aquatic ecosystems, knowledge about radioactive nuclide occurrence forms and migration patterns. Experimental tests of nuclear and thermonuclear weapon in atmosphere and underground, nuclear power engineering and numerous accidents that took place at the nuclear power plants (NPP), unauthorized dump of radioactive materials in various places of the ocean and pouring off the strongly dump of radioactive wastes from ships and submarine equipped with nuclear power engines made artificial radionuclides a constant and unretrievable component of the modern biosphere, becoming an additional unfavorable ecological factor. As regards Former Sovient Union (FSU) the most unfavorable regions are Southern Ural, zones suffered from Chernobyl Accident, Altay, Novaya Zemlya, some part of West Siberia near Seversk (Tomsk-7) and Zheleznogorsk (Krasnoyarsk-26). (orig.)

  1. Method of processing radioactive nuclide-containing liquids

    International Nuclear Information System (INIS)

    Hirai, Masahide; Tomoshige, Shozo; Kondo, Kozo; Suzuki, Kazunori; Todo, Fukuzo; Yamanaka, Akihiro.

    1985-01-01

    Purpose: To solidify radioactive nuclides in to a much compact state and facilitate the storage. Method: Liquid wastes such as drain liquids generated from a nuclear power plant at a low density of 1 x 10 -6 - 10 -4 μCi/ml are previously brought into contact with a chelate type ion exchange resin such as of phenolic resin or ion exchange resin to adsorb the radioactive nuclides on the resin and the nuclides are eluted with sulfuric acid or the like to obtain liquid concentrates. The liquid concentrates are electrolyzed in an ordinary electrolytic facility using platinum or the like as the anode, Al or the like as the cathode, under the presence of 1 - 20 g/l of non-radioactive heavy metals such as Co and Ni in the liquid and while adjusting pH to 2 - 8. The electrolysis liquid residue is returned again to the electrolysis tank as it is or in the form of precipitates coagulated with a polymeric floculant. The supernatant liquid upon floculating treatment is processed with the chelate type ion exchange resin into hazardless liquid. (Sekiya, K.)

  2. Modelling the reactive-path between pyrite and radioactive nuclides

    International Nuclear Information System (INIS)

    Kang Mingliang; Wu Shijun; Dou Shunmei; Chen Fanrong; Yang Yongqiang

    2008-01-01

    The mobility of redox sensitive nuclides is largely dependent on their valence state. The radionuclides that make the dominant contributions to final dose calculations are redox sensitive. Almost all the radionuclides (except 129 I) have higher mobility at high valence state, and correspond to immobilization at low valence state due to the much lower solubility. Pyrite is an ubiquitous and stable mineral in geological environment, and would be used as a low-cost long time reductant for the immobilization of radionuclides. However, pyrite oxidation is supposed to generate acid, which will enhance the mobility of nuclides. In this paper, the reaction path of the reactions between radionuclides (U, Se and Tc) and pyrite in the groundwater from Wuyi well in Beishan area of China has been simulated using geochemical modeling software. According to the results, pyrite can reduce high valence nuclides to a dinky-level effectively, with the pH slightly increasing under anaerobic condition that is common in deep nuclear waste repositories. (authors)

  3. Transient nuclide release through the bentonite barrier -SKB 91

    International Nuclear Information System (INIS)

    Bengtsson, A.; Widen, H.

    1991-05-01

    A study of near-field radionuclide migration is presented. The study has been performed in the context of the SKB91 study which is a comprehensive performance assessment of disposal of spent fuel. The objective of the present study has been to enable the assessment of which nuclides can be screened out because they decay to insignificant levels already in the near-field of the repository. A numerical model has been used which describes the transient transport of radionuclides through a small hole in a HLW canister imbedded in bentonite clay into a fracture in the rock outside the bentonite. Calculations for more than twenty nuclides, nuclides with both high and low solubility have been made. The effect of sorption in the bentonite backfill is included. The size of the penetration hole was assumed to be constant up to time when the calculations were terminated, 500000 year after the deposition. The mass transport rate is controlled by diffusion. The model is three dimensional. The report describes the geometry of the modelled system, the assumptions concerning the transport resistances at the boundary conditions, the handling of the source term and obtained release curves. (au)

  4. Soil nuclide distribution coefficients and their statistical distributions

    International Nuclear Information System (INIS)

    Sheppard, M.I.; Beals, D.I.; Thibault, D.H.; O'Connor, P.

    1984-12-01

    Environmental assessments of the disposal of nuclear fuel waste in plutonic rock formations require analysis of the migration of nuclides from the disposal vault to the biosphere. Analyses of nuclide migration via groundwater through the disposal vault, the buffer and backfill, the plutonic rock, and the consolidated and unconsolidated overburden use models requiring distribution coefficients (Ksub(d)) to describe the interaction of the nuclides with the geological and man-made materials. This report presents element-specific soil distribution coefficients and their statistical distributions, based on a detailed survey of the literature. Radioactive elements considered were actinium, americium, bismuth, calcium, carbon, cerium, cesium, iodine, lead, molybdenum, neptunium, nickel, niobium, palladium, plutonium, polonium, protactinium, radium, samarium, selenium, silver, strontium, technetium, terbium, thorium, tin, uranium and zirconium. Stable elements considered were antimony, boron, cadmium, tellurium and zinc. Where sufficient data were available, distribution coefficients and their distributions are given for sand, silt, clay and organic soils. Our values are recommended for use in assessments for the Canadian Nuclear Fuel Waste Management Program

  5. Measurement of radioactive nuclides in the 'Mayak' region

    International Nuclear Information System (INIS)

    Myasoedov, B.F.; Novikov, A.P.

    1997-01-01

    The study of environmental contamination caused by anthropogenic impact and, primarily, by radioactive nuclides is one of the main scientific problems facing contemporary science. Radioecological monitoring, decision making on remediation of polluted areas need detailed information about distribution of radioactive nuclides in the terrestrial and aquatic ecosystems, knowledge about radioactive nuclide occurrence forms and migration patterns. Experimental tests of nuclear and thermonuclear weapon in atmosphere and underground, nuclear power engineering and numerous accidents that took place at the nuclear power plants (NPP), unauthorized dump of radioactive materials in various places of the ocean and pouring off the strongly dump of radioactive wastes from ships and submarine equipped with nuclear power engines made artificial radionuclides a constant and unretrievable component of the modern biosphere, becoming an additional unfavorable ecological factor. As regards Former Sovient Union (FSU) the most unfavorable regions are Southern Ural, zones suffered from Chernobyl Accident, Altay, Novaya Zemlya, some part of West Siberia near Seversk (Tomsk-7) and Zheleznogorsk (Krasnoyarsk-26). (orig.)

  6. Computer program FPIP-REV calculates fission product inventory for U-235 fission

    Science.gov (United States)

    Brown, W. S.; Call, D. W.

    1967-01-01

    Computer program calculates fission product inventories and source strengths associated with the operation of U-235 fueled nuclear power reactor. It utilizes a fission-product nuclide library of 254 nuclides, and calculates the time dependent behavior of the fission product nuclides formed by fissioning of U-235.

  7. Cosmogenic 10Be signature of geomagnetic dipole moment variations over the last 2 Ma

    Science.gov (United States)

    Simon, Q.; Thouveny, N.; Bourlès, D. L.; Valet, J. P.; Bassinot, F. C.; Savranskaia, T.; Duvivier, A.; Choy, S.; Gacem, L.; Villedieu, A.

    2017-12-01

    Long-term variations of the geomagnetic dipole moment (GDM) during periods of stable polarity and in transitional states (reversals and excursions) provide key information for understanding the geodynamo regime. Authigenic 10Be/9Be ratios (Be-ratio, proxy of atmospheric 10Be production) from marine sedimentary cores give independent and additional insights on the evolution of the geomagnetic intensity, completing information from absolute and relative paleointensity (RPI) records. Here we present new Be-ratio results obtained on several marine cores from the North Atlantic, Indian and Pacific Oceans which permit to extent into the Matuyama chron our previous 10Be-derived GDM reconstructions (Simon et al., 2016 JGR 121). Stratigraphic offsets measured between Be-ratio peaks and the corresponding RPI minima in each studied cores are assigned to (post-) detrital remanent magnetization (pDRM) effects leading to magnetization locking-in delays varying from 0 to 16 cm (up to 12 ka). All these results were compiled in order to obtain a continuous Be-ratio record covering the last 2 Ma. 10Be overproduction episodes triggered by geomagnetic dipole moment lows (GDL) linked to polarity reversals and excursions confirm the global control exerted by the GDM on cosmogenic radionuclides production. A dipole moment reconstruction derived from the Be-ratio stack (BeDiMo2Ma) was calibrated using absolute paleointensity data. This independent record completes the available paleomagnetic RPI records and permits: 1) to confront and increase the robustness and precision of GDM reconstructions; and, 2) to better constrain geomagnetic field instabilities during the mid- to late- Matuyama chron. Our new 10Be derived inventory is fully compatible with the GDL series linked to polarity reversals (Matuyama-Brunhes transition, Jaramillo and Olduvai boundaries), geomagnetic events (Cobb Mountain, Réunion) and Brunhes' excursions (e.g. Laschamp, Blake, Iceland-Basin, Big Lost). It further

  8. The role of the shot effect in the accumulation of nuclide masses and activities in the thermal reactor core

    International Nuclear Information System (INIS)

    Nepoleao, P.; Rudak, E.; Wiley, J.

    1998-01-01

    A method is proposed for estimating masses and activities of nuclides in the thermal reactor core with an arbitrary dependence of specific masses on the burnout depth. The method takes into account the statistical character of micro processes accompanying the fuel burning out and accumulation of fission and activation products. For the RBMK reactor of Chernobyl NPP the method gives practically the same results as exact numerical calculations. (author)

  9. Computer programs to make a Chart of the nuclides for WWW

    International Nuclear Information System (INIS)

    Nakagawa, Tsuneo; Katakura, Jun-ichi; Horiguchi, Takayoshi

    1999-06-01

    Computer programs to make a chart of the nuclides for World Wide Web (WWW) have been developed. The programs make a data file for WWW chart of the nuclides from a data file containing nuclide information in the format similar to ENSDF, by filling unknown half-lives with calculated ones. Then, the WWW chart of the nuclides in the gif format is created from the data file. The programs to make html files and image map files, to select a chart of selected nuclides, and to show various information of nuclides are included in the system. All the programs are written in C language. This report describes the formats of files, the programs and 1998 issue of Chart of the Nuclides made by means of the present programs. (author)

  10. Planetary skin games

    International Nuclear Information System (INIS)

    Vaniman, D.T.; Reedy, R.C.

    1988-01-01

    An informal review of techniques for analysis of meteorites and materials from the lunar surface is presented. Attention is given to problems associated with the production rates of cosmogenic nuclides

  11. Short-lived radioactive nuclides in meteorites and early solar system processes

    International Nuclear Information System (INIS)

    Chaussidon, M.; Gounelle, M.

    2007-01-01

    Now extinct, short-lived radioactive nuclides, such as 7 Be (T 1/2 = 53 days), 10 Be (T 1/2 = 1.5 Ma), 26 Al (T 1/2 = 0.74 Ma), 36 Cl (T 1/2 = 0.3 Ma), 41 Ca (T 1/2 = 0.1 Ma), 53 Mn (T 1/2 = 3.7 Ma) and 60 Fe (T 1/2 = 1.5 Ma), were present in the proto-solar nebula when the various components of meteorites formed. The presence of these radioactive isotopes requires a 'last-minute' origin, either nucleosynthesis in a massive star dying close in space and time to the nascent solar system or production by local irradiation of part of the proto-solar disk by high-energy solar cosmic rays. In this review, we list: (i) the different observations indicating the existence of multiple origins for short-lived radioactive nuclides, namely 7 Be, 10 Be and 36 Cl for irradiation scenario and 60 Fe for injection scenario; (ii) the constraints that exist on their distribution (homogeneous or heterogeneous) in the accretion disk; (iii) the constraints they brought on the timescales of nebular processes (from Ca-Al-rich inclusions to chondrules) and of the accretion and differentiation of planetesimals. (authors)

  12. Determination of the nuclide vector for decommissioning projects at PSI (Paul Scherrer Institute, Switzerland)

    Energy Technology Data Exchange (ETDEWEB)

    Jaeggi, Maya; Eikenberg, J. [Paul Scherrer Inst. (PSI), Villigen (Switzerland). Labor fuer Radioanalytik; Ehrlicher, U. [Paul Scherrer Inst. (PSI), Villigen (Switzerland). Sektion Rueckbau und Entsorgung

    2012-06-15

    In the context of two reactor decommissioning projects, radioactive slurry from concrete cutting was collected in the retention pond (RHB) at the Paul Scherrer Institute, along with radioactive drain outlets. Additionally, there are active residues from former operations. The task was to determine the nuclide vector of the radioactive slurry before final disposal. Due to the slurry from neutron-activated concrete, activation products, like {sup 55}Fe, {sup 60}Co, {sup 63}Ni, {sup 133}Ba, {sup 152}Eu, {sup 154}Eu and {sup 155}Eu can be expected. Accumulated drain outlets from laboratories, where work with radioactive substances is being done, were expected to contain {sup 22}Na, {sup 60}Co, {sup 134}Cs, {sup 137}Cs, {sup 133}Ba, {sup 152}Eu, {sup 154}Eu, {sup 155}Eu, {sup 241}Am, {sup 239/240}Pu, {sup 241}Pu, {sup 244}Cm, {sup 234}U, {sup 235}U, {sup 238}U, {sup 230}Th, {sup 232}Th and {sup 90}Sr. For further clarification, {sup 3}H and {sup 14}C in the water and in the organic phase had to be measured as well. This work gives an overview about the slurry dissolution techniques, the radiochemical separation methods and activity concentrations of the nuclide vector. Further processing of the slurry is also discussed. (orig.)

  13. Calculation device for amount of heavy element nuclide in reactor fuels and calculation method therefor

    International Nuclear Information System (INIS)

    Naka, Takafumi; Yamamoto, Munenari.

    1995-01-01

    When there are two or more origins of deuterium nuclides in reactor fuels, there are disposed a memory device for an amount of deuterium nuclides for every origin in a noted fuel segment at a certain time point, a device for calculating the amount of nuclides for every origin and current neutron fluxes in the noted fuel segment, and a device for separating and then displaying the amount of deuterium nuclides for every origin. Equations for combustion are dissolved for every origin of the deuterium nuclides based on the amount of the deuterium nuclides for every origin and neutron fluxes, to calculate the current amount of deuterium nuclides for every origin. The amount of deuterium nuclides originated from uranium is calculated ignoring α-decay of curium, while the amount of deuterium nuclides originated from plutonium is calculated ignoring the generation of plutonium formed from neptunium. Deuterium nuclides can be measured and controlled accurately for every origin of the reactor fuels. Even when nuclear fuel materials have two or more nationalities, the measurement and control thereof can be conducted for every country. (N.H.)

  14. Fuel burn-up distribution and transuranic nuclide contents produced at the first cycle operation of AP1000

    International Nuclear Information System (INIS)

    Jati Susilo; Jupiter Sitorus Pane

    2016-01-01

    AP1000 reactor core was designed with nominal power of 1154 MWe (3415 MWth), operated within life time of 60 years and cycle length of 18 months. For the first cycle, the AP1000 core uses three kinds of UO 2 enrichment, they are 2.35 w/o, 3.40 w/o and 4.45 w/o. Absorber materials such as ZrB 2 , Pyrex and Boron solution are used to compensate the excess reactivity at the beginning of cycle. In the core, U-235 fuels are burned by fission reaction and produce energy, fission products and new neutron. Because of the U-238 neutron absorption reaction, the high level radioactive waste of heavy nuclide transuranic such as Pu, Am, Cm and Np are also generated. They have a very long half life. The purpose of this study is to evaluate the result of fuel burn-up distribution and heavy nuclide transuranic contents produced by AP1000 at the end of first cycle operation (EOFC). Calculation of ¼ part of the AP1000 core in the 2 dimensional model has been done using SRAC2006 code with the module of COREBN/HIST. The input data called the table of macroscopic cross section, is calculated using module of PIJ. The result shows that the maximum fuel assembly (FA) burn-up is 27.04 GWD/MTU, that is still lower than allowed maximum burn-up of 62 GWD/MTU. Fuel loading position at the center/middle of the core will produce bigger burn-up and transuranic nuclide than one at the edges the of the core. The use of IFBA fuel just give a small effect to lessen the fuel burn-up and transuranic nuclide production. (author)

  15. Fission product and actinide data evaluations for ENDF/B--V

    International Nuclear Information System (INIS)

    Schenter, R.E.

    1978-05-01

    The planned content and performance of fission product and actinide nuclide evaluations for the ENDF/B-V collection of data are reviewed. Representative values of parameters for a few nuclides are shown. 10 figures, 5 tables

  16. Calculations of thermal-reactor spent-fuel nuclide inventories and comparisons with measurements

    International Nuclear Information System (INIS)

    Wilson, W.B.; LaBauve, R.J.; England, T.R.

    1982-01-01

    Comparisons with integral measurements have demonstrated the accuracy of CINDER codes and libraries in calculating aggregate fission-product properties, including neutron absorption, decay power, and decay spectra. CINDER calculations have, alternatively, been used to supplement measured integral data describing fission-product decay power and decay spectra. Because of the incorporation of the extensive actinide library and the use of ENDF/B-V data, it is desirable to compare the inventory of individual nuclides obtained from tandem EPRI-CELL/CINDER-2 calculations with those determined in documented benchmark inventory measurements of spent reactor fuel. The development of the popular 148 Nd burnup measurement procedure is outlined, and areas of uncertainty in it and lack of clarity in its interpretation are indicated. Six inventory samples of varying quality and completeness are examined. The power histories used in the calculations have been listed for other users

  17. Notre Dame Nuclear Database: A New Chart of Nuclides

    Science.gov (United States)

    Lee, Kevin; Khouw, Timothy; Fasano, Patrick; Mumpower, Matthew; Aprahamian, Ani

    2014-09-01

    Nuclear data is critical to research fields from medicine to astrophysics. We are creating a database, the Notre Dame Nuclear Database, which can store theoretical and experimental datasets. We place emphasis on storing metadata and user interaction with the database. Users are able to search in addition to the specific nuclear datum, the author(s), the facility where the measurements were made, the institution of the facility, and device or method/technique used. We also allow users to interact with the database by providing online search, an interactive nuclide chart, and a command line interface. The nuclide chart is a more descriptive version of the periodic table that can be used to visualize nuclear properties such as half-lives and mass. We achieve this by using D3 (Data Driven Documents), HTML, and CSS3 to plot the nuclides and color them accordingly. Search capabilities can be applied dynamically to the chart by using Python to communicate with MySQL, allowing for customization. Users can save the customized chart they create to any image format. These features provide a unique approach for researchers to interface with nuclear data. We report on the current progress of this project and will present a working demo that highlights each aspect of the aforementioned features. This is the first time that all available technologies are put to use to make nuclear data more accessible than ever before in a manner that is much easier and fully detailed. This is a first and we will make it available as open source ware.

  18. Nuclide-related exemption limits for radioactive materials

    International Nuclear Information System (INIS)

    Przyborowski, S.; Scheler, R.

    1984-01-01

    A procedure has been proposed for setting nuclide-related exemption limits for radioactive materials. It consists in grading the radionuclides into 4 groups of radiotoxicity and assigning only one activity limit to each of them. Examples are given for about 200 radionuclides. The radiation exposures resulting from a continuous steady release of activity fractions or from short-period release of the entire activity were assessed to remain below 0.1 ALI in both of these borderline cases, thus justifying the license-free utilization of radioactive materials below the exemption limits. (author)

  19. Atomic and nuclear parameters of single electron capture decaying nuclides

    International Nuclear Information System (INIS)

    Grau, A.

    1981-01-01

    Atomic and nuclear parameters of the following nuclides which decay by electron capture have been calculated: 37 A r, 41 C a, 49 V , 53 M n, 55 F e,59 N i, 68Ge,82 S r, 97 T c, 118 T e, 131 C s, 137 L a, 140 N d, 157 T b, 165 E r, 193 p t, 194 H g, and 205 P h The evaluation rules are included in the first part of the paper. The values and the associated uncertainties of the following parameters have been tabulated: decay energy, electron capture probabilities, fluorescence yield, electron emission and X-ray emission. (Author) 27 refs

  20. Chemical concentration of a new natural spontaneously fissionable nuclide from solutions with low salt background

    International Nuclear Information System (INIS)

    Korotkin, Yu.S.; Ter-Akop'yan, G.M.; Popeko, A.G.; Drobina, T.P.; Zhuravleva, E.L.

    1982-01-01

    The results of experiments on further concentration of a new natural spontaneously fissionable nuclide, the concentrates of which form the Cheleken geothermal brines have been obtained, are presented. The conclusions are drown about the chemical nature of a new spontaneously fissionable nuclide. It is a chalcophile element which copreipitates with sulphides of copper, lead, arsenic and mercury from weakly acid solutions. The behaviour of the new nuclide in sulphide systems in many respects is similar to the behaviour of polonium, astatine and probably of bismuth. The most probable stable valence of the new nuclide varies from +1 up to +3. The data available on the chemical behaviour of the new nuclide as well as the analysis over contamination by spontaneously fissionable isotopes permit to state that the new natural spontaneously fissionable nuclide does not relate to the known isotopes

  1. Multi-pathway model of nuclide transport in fractured media and its application

    International Nuclear Information System (INIS)

    Li Xun; Yang Zeping; Li Jinxuan

    2010-01-01

    In order to know the law of nuclide transport in fracture system, the basic differential equations of nuclide transport in fracture and matrix were obtained based on the dual media theory, and the general analytic solutions of nuclide transport in single fractured media with exponential attenuation source in fracture were deduced by Laplace transform, and one-dimensional multi-pathway model of nuclide transport was proposed based on dual media theory and stochastic distribution of fracture parameters. The transport of Th-229, Cs-135 and Se-79 were simulated with this model, the relative concentration of these nuclides in fracture system were predicted. Further more, it was deduced that aperture and velocity can distinctly influence transport of nuclide by comparing with the results which were simulated by single fracture model. (authors)

  2. Water hyacinth : the suitable aquatic weed for radioactive nuclide absorption in water

    International Nuclear Information System (INIS)

    Chalermsuk, Somporn; Jungpattanawadee, Komgrid; Tongrong, Thanachai

    2003-06-01

    The experiment was set up to determine the quantities of radioactive nuclides which were absorbed by aquatic weeds in Khon Kaen Province. The best aquatic weed would be used to be sampled for study of radioactive nuclide quantities in natural water resources. Seven kinds of aquatic weeds in the same site were corrected and pretreated by ovening to be ash at 450 οC. Gamma-ray spectra of the samples were detected and analyzed for comparing the quantities of radioactive nuclides. Gamma-ray spectrometry with a HPGe detector was set up to detect radioactive nuclides and their quantities in ashes of aquatic weeds. According to this study, water hyacinth, from seven aquatic weeds, had the most quantities of radioactive nuclides. The water hyacinth with 30 cm leaves in length can absorb the most quantities of radioactive nuclides

  3. Exact error estimation for solutions of nuclide chain equations

    International Nuclear Information System (INIS)

    Tachihara, Hidekazu; Sekimoto, Hiroshi

    1999-01-01

    The exact solution of nuclide chain equations within arbitrary figures is obtained for a linear chain by employing the Bateman method in the multiple-precision arithmetic. The exact error estimation of major calculation methods for a nuclide chain equation is done by using this exact solution as a standard. The Bateman, finite difference, Runge-Kutta and matrix exponential methods are investigated. The present study confirms the following. The original Bateman method has very low accuracy in some cases, because of large-scale cancellations. The revised Bateman method by Siewers reduces the occurrence of cancellations and thereby shows high accuracy. In the time difference method as the finite difference and Runge-Kutta methods, the solutions are mainly affected by the truncation errors in the early decay time, and afterward by the round-off errors. Even though the variable time mesh is employed to suppress the accumulation of round-off errors, it appears to be nonpractical. Judging from these estimations, the matrix exponential method is the best among all the methods except the Bateman method whose calculation process for a linear chain is not identical with that for a general one. (author)

  4. WIS decontamination factor demonstration test with radioactive nuclides

    International Nuclear Information System (INIS)

    Kanbe, Hiromi; Mayuzumi, Masami; Ono, Tetsuo; Nagae, Madoka; Sekiguchi, Ryosaku; Takaoku, Yoshinobu.

    1987-01-01

    A radioactive Waste Incineration System (WIS) with suspension combustion is noticed as effective volume reduction technology of low level radiactive wastes that are increasing every year. In order to demonstrate the decontamination efficiency of ceramic filter used on WIS, this test has been carried out with the test facilities as joint research of Central Research Institute of Electric Power Industry (CRIEPI) and Sumitomo Heavy Industries, Ltd. Miscellaneous combustible waste and power resin, to which 5 nuclides (Mn-54, Fe-59, Co-60, Zn-65, Cs-137) were added, were used as samples for incineration. As the result of the test, it was verified that Decontamination Factor (DF) of the single stage ceramic filter was usually kept over 10 5 for every nuclide, and from the results of above DF, over 10 8 is expected for real commercial plant as a total system. Therefore, it is realized that the off-gas clean up system of the WIS composed of only single stage of ceramic filter is capable of sufficiently efficient decontamination of exhaust gas to be released to stack. (author)

  5. The clinical application of nuclide bone imaging in malignant lymphomas

    International Nuclear Information System (INIS)

    Jin Xing; Tang Mingdeng; Lin Duanyu; Ni Leichun

    2006-01-01

    Objective: To evaluate the clinical application value of nuclide bone imaging in malignant lymphoma. Methods: 71 cases of patients were diagnosed by pathology as malignant lymphoma, among whom there were 8 cases of Hodgkin disease (HL) and 63 cases of non-Hodgkin disease (NHL). The examinations were performed from 2.5 to 6 hours later after the intravenous injection of 99m Tc-MDP (555-925 MBq). Results: 31 cases were bone-infiltrating lesions, including 3 cases of HL and 28 cases of NHL. The total number of the focus was 103, except 2 cases of bone lack, including 35 foci in vertebral column (34.65%), 30 foci in limb and joint (29.70%), 14 foci in rib (13.86%), 13 foci in elvis (12.0%), 5 foci in skull (4.95%) and 4 foci in sternum (3.96%). Conclusion: The nuclide bone imaging has a high value in the clinical stage, therapeutic observation and prognosis of bone-infiltrating malignant lymphoma. (authors)

  6. Contribution of short-lived nuclides to decay heat

    International Nuclear Information System (INIS)

    Katakura, Jun-ichi

    1987-01-01

    Comments are made on the calculation of decay heat, centering on evaluation of average decay energy. It is difficult to obtain sufficiently useful decay diagrams of short lived nucleides. High-energy levels are often missing in inferior decay diagrams, leading to an overestimation of the intensity of beta-rays at low-energy levels. Such an overestimation or underestimation due to the inferiority of a decay diagram is referred to as pandemonium effect. The pandemonium effect can be assessed by means of the ratio of the measured energy of the highest level of the daughter nuclide to the Q β -value of the beta-decay. When a satisfactory decay diagram cannot be obtained, the average decay energy has to be estimated by theoretical calculation. The gross theory for beta-decay proposed by Yamada and Takahashi is employed for the calculation. To carry out the calculation according to this theory, it is required to determine the value for the parameter Q 00 , the lowest energy of the daughter nuclide that meets the selection rule for beta-decay. Currently, Q 00 to be used for this purpose is estimated from data on the energy of the lowest level found in a decay diagram, even if it is inferior. Some examples of calculation of decay heat using the average beta- or gamma-ray energy are shown and compared with measurements. (author)

  7. Comparative test on nuclide migration in aerated zone

    International Nuclear Information System (INIS)

    Li Shushen; Zhao Yingjie; Wu Qinghua; Wang Zhiming; Hao Janzhong; Ji Shaowei; Guo Liangtian; Guo Zhiming

    2002-01-01

    In order to study the influence of different tracer source layer material on nuclide migration behavior, the comparative test on stable elements Sr, Nd and Ce migration in aerated loess zone was carried out using loess and arenaceous quartz as the tracer source layer materials respectively. The test lasted 470 days. During the test, four times of sampling were done. The testing results indicate that under artificial sprinkling of 5 mm/h and 3 h/d, Nd and Ce not only in loess tracer source layer but also in arenaceous quartz tracer source layer did not obviously downwards migrated. Concentration peak of Sr for loess layer migrated down about 15 cm in 470 d (mass center moved down about 10 cm) but for arenaceous quartz layer the concentration peak of Sr did not obviously migrated down (mass center moved down about 2.7 cm). The test results show that very thin arenaceous quartz layer with thickness of 7 mm is also able to shield unsaturated water flow obviously. This is the main reason why the nuclides in arenaceous quartz layer migrate down slowly

  8. Calculation of the minimum critical mass of fissile nuclides

    International Nuclear Information System (INIS)

    Wright, R.Q.; Hopper, Calvin Mitchell

    2008-01-01

    The OB-1 method for the calculation of the minimum critical mass of fissile actinides in metal/water systems was described in a previous paper. A fit to the calculated minimum critical mass data using the extended criticality parameter is the basis of the revised method. The solution density (grams/liter) for the minimum critical mass is also obtained by a fit to calculated values. Input to the calculation consists of the Maxwellian averaged fission and absorption cross sections and the thermal values of nubar. The revised method gives more accurate values than the original method does for both the minimum critical mass and the solution densities. The OB-1 method has been extended to calculate the uncertainties in the minimum critical mass for 12 different fissile nuclides. The uncertainties for the fission and capture cross sections and the estimated nubar uncertainties are used to determine the uncertainties in the minimum critical mass, either in percent or grams. Results have been obtained for U-233, U-235, Pu-236, Pu-239, Pu-241, Am-242m, Cm-243, Cm-245, Cf-249, Cf-251, Cf-253, and Es-254. Eight of these 12 nuclides are included in the ANS-8.15 standard.

  9. Cosmogenic 3He in hematite and goethite from Brazilian "canga" duricrust demonstrates the extreme stability of these surfaces

    Science.gov (United States)

    Shuster, David L.; Farley, Kenneth A.; Vasconcelos, Paulo M.; Balco, Greg; Monteiro, Hevelyn S.; Waltenberg, Kathryn; Stone, John O.

    2012-05-01

    Helium isotopes were measured in hematite and goethite samples from several lateritiric duricrusts (canga) developed on banded iron formations. These samples uniformly have high 3He concentrations which must arise from long periods of cosmic ray exposure. From coexisting phases from the Quadrilátero Ferrífero in east central Brazil, we determined the ratio of cosmogenic 3He in hematite to that of 21Ne in quartz to be 3.96 ± 0.19. Combined with best current estimates of the 21Ne production rate in quartz, this ratio implies a sea-level high latitude (SLHL) 3He production rate in hematite of 68.1 ± 8.1 atoms/g/yr; from the chemical composition we estimate the 3He production rate in goethite to be ~ 5% higher. We use these production rate estimates to interpret 3He concentrations measured in goethite and hematite from a ~ 10 m depth profile collected from a surface canga in Carajás, in the Amazon basin of Brazil. We find that the Carajás canga has experienced a very low rate of surface erosion (~ 0.16-0.54 m/Myr) over at least the last few millions of years. This iron-rich canga surface is remarkably resistant to erosion despite its location in a wet tropical environment. Details of the depth profile suggest that despite its stability, the canga has also been internally dynamic (translocation of material; solution and reprecipitation) over million-year timescales.

  10. Validation of spent nuclear fuel nuclide composition data using percentage differences and detailed analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Man Cheol [Chung-Ang Univ., Seoul (Korea, Republic of). School of Energy Systems Engineering

    2017-06-15

    Nuclide composition data of spent nuclear fuels are important in many nuclear engineering applications. In reactor physics, nuclear reactor design requires the nuclide composition and the corresponding cross sections. In analyzing the radiological health effects of a severe accident on the public and the environment, the nuclide composition in the reactor inventory is among the important input data. Nuclide composition data need to be provided to analyze the possible environmental effects of a spent nuclear fuel repository. They will also be the basis for identifying the origin of unidentified spent nuclear fuels or radioactive materials.

  11. Cosmogenic helium and volatile-rich fluid in Sierra leone alluvial diamonds

    International Nuclear Information System (INIS)

    McConville, P.; Reynolds, J.H.

    1989-01-01

    Pursuant to the discovery elsewhere of cosmogenic 10 Be in alluvial diamond fragments from Zaire, noble gas measurements were made on two identical splits of a finely powdered, harshly acid-washed sample derived from selected (for clarity) fragments of a single alluvial diamond from Sierra Leone (sample LJA → L4 and L5). Essentially identical results were obtained for both splits. Isotopic ratios for Ar, Kr, and Xe were atmospheric and their elemental abundances were high relative to published data, owing to shock implantation in the crushing as verified in a supplementary experiment. No neon was detected above blank level. 3 He was exceptionally abundant, 4 He exceptionally depleted, possibly from the acid wash, and the ratio 3 He/ 4 He almost unprecedentedly high at an R/R a value of 246 ± 16. The results support the hypothesis that excess 3 He in diamonds is cosmogenic, although a cosmic-ray exposure of 5, 35, or (impossibly) 152 Ma for cyclic gardening of the sample to a maximum depth of 0, 4.6 m, or 20 m, respectively, is required. Troublesome for the cosmogenic hypothesis is a sample from very deep in the Finsch mine, South Africa, found by Zadnik et al (1987) to have an R/R a value of 1,000. This paper includes histograms of noble gas data published prior to mid-1988 for diamonds of known provenance. The Sierra Leone diamond studied in the supplementary experiment belongs to a distinct population of 40* Ar-rich diamonds consisting mostly of cubic diamonds for Zaire

  12. Measurement of nuclide cross-sections of spallation residues in 1 A GeV 238U + proton collisions

    International Nuclear Information System (INIS)

    Taieb, J.; Tassan-Got, L.; Bernas, M.; Mustapha, B.; Rejmund, F.; Stephan, C.; Schmidt, K.H.; Armbruster, P.; Benlliure, J.; Enqvist, T.; Boudard, A.; Legrain, R.; Leray, S.; Volant, C.; Wlazlo, W.; Casarejos, E.; Czajkowski, S.; Pravikoff, M.

    2003-02-01

    The production of heavy nuclides from the spallation-evaporation reaction of 238 U induced by 1 GeV protons was studied in inverse kinematics. The evaporation residues from tungsten to uranium were identified in-flight in mass and atomic number. Their production cross-sections and their momentum distributions were determined. The data are compared with empirical systematics. A comparison with previous results from the spallation of 208 Pb and 197 Au reveals the strong influence of fission in the spallation of 238 U. (orig.)

  13. Tungsten isotopic compositions of iron meteorites: Chronological constraints vs. cosmogenic effects

    Science.gov (United States)

    Markowski, A.; Quitté, G.; Halliday, A. N.; Kleine, T.

    2006-02-01

    High-precision W isotopic compositions are presented for 35 iron meteorites from 7 magmatic groups (IC, IIAB, IID, IIIAB, IIIF, IVA, and IVB) and 3 non-magmatic groups (IAB, IIICD, and IIE). Small but resolvable isotopic variations are present both within and between iron meteorite groups. Variations in the 182W/ 184W ratio reflect either time intervals of metal-silicate differentiation, or result from the burnout of W isotopes caused by a prolonged exposure to galactic cosmic rays. Calculated apparent time spans for some groups of magmatic iron meteorites correspond to 8.5 ± 2.1 My (IID), 5.1 ± 2.3 My (IIAB), and 5.3 ± 1.3 My (IVB). These time intervals are significantly longer than those predicated from models of planetesimal accretion. It is shown that cosmogenic effects can account for a large part of the W isotopic variation. No simple relationship exists with exposure ages, compromising any reliable method of correction. After allowance for maximum possible cosmogenic effects, it is found that there is no evidence that any of the magmatic iron meteorites studied here have initial W isotopic compositions that differ from those of Allende CAIs [ ɛ182W = - 3.47 ± 0.20; [T. Kleine, K. Mezger, H. Palme, E. Scherer and C. Münker, Early core formation in asteroids and late accretion of chondrite parent bodies: evidence from 182Hf- 182W in CAIs, metal-rich chondrites and iron meteorites, Geochim. Cosmochim. Acta (in press)]. Cosmogenic corrections cannot yet be made with sufficient accuracy to obtain highly precise ages for iron meteorites. Some of the corrected ages nevertheless require extremely early metal-silicate segregation no later than 1 My after formation of CAIs. Therefore, magmatic iron meteorites appear to provide the best examples yet identified of material derived from the first planetesimals that grew by runaway growth, as modelled in dynamic simulations. Non-magmatic iron meteorites have a more radiogenic W isotopic composition than magmatic

  14. Cold rocks, hot sands: In-situ cosmogenic applications in Australia at ANTARES

    International Nuclear Information System (INIS)

    Fink, David; McKelvey, B.; Hannan, D.; Newsome, D.

    2000-01-01

    The ANTARES AMS facility at ANSTO is conducting a comprehensive program in the application of in-situ cosmogenic radionuclides based on strong university collaborations in the earth sciences. The program targets two major objectives: (1) to determine and improve the Quaternary glacial chronology of the Southern Hemisphere in support of global climate change studies; (2) to characterise the processes of surface weathering and landscape evolution in semi-arid regions of the Australian continent. An overview of the program is presented with preliminary results from the first phase of these studies

  15. Database for radionuclide transport in the biosphere: nuclide specific and geographic data for northern Switzerland

    International Nuclear Information System (INIS)

    Jiskra, J.

    1985-01-01

    The biosphere model is the final link in the chain of radionuclide transport models, used for radiation dose calculations from high-level waste repositories. This report presents the data needed for biosphere calculations and discusses them where necessary. The first part is dedicated to the nuclide specific parameters like distribution coefficients (water -soil), concentration ratios (soil - plant) and distribution factors (for milk, meat, etc.) which are reported in the literature. The second part contains the choice of regions, their division into compartments and the discussion of nutritional habits for man and animals. At the end a theoretical human population for each region is estimated based on the consumption rates and on the yield of agricultural products, assuming an autonomous nutrition. (author)

  16. A minimum age for Llullaillaco south flow from cosmogenic 3He: Much older than 19th century

    International Nuclear Information System (INIS)

    Niedermann, S.; Althau, T.; Hahne, K

    2001-01-01

    Dating of Holocene lava flows can be a difficult task in cases when buried organic material suitable for 14 C dating is lacking, as typical for arid climatic conditions. Cosmic-ray-produced nuclides may provide an alternative dating method, especially for lava flows exposed at high altitudes: When cosmic ray particles (predominantly secondary neutrons) interact with terrestrial surface rocks, they can produce a variety of stable and radioactive nuclides by spallation reactions with target elements in the crystal lattice (e.g. Lal, 1988; Cerling and Craig, 1994). Some of these nuclides, such as the noble gas isotopes 3 He and 21 Ne or the radionuclides 10 Be, 26 Al, and 36 Cl, can be detected mass-spectrometrically, and their concentration can be used to determine the duration of the rock exposure on the surface as production rates decrease rapidly with depth. The intensity of cosmic rays increases with altitude due to the reduced shielding by the atmosphere, therefore production rates at 4000 m are more than an order of magnitude higher than at sea level (Lal, 1991; Dunai, 2000). The Central Volcanic Zone (CVZ) in the Andes of northern Chile is a region of prevailing arid climate, where a lot of prehistoric lava flows are still undated. Typically, high elevations and low erosion rates render them well suited for surface exposure dating. However, there are a few obstacles also. Many lavas in the CVZ have andesitic to dacitic compositions and a very small-grained structure. The most abundant rock-forming mineral plagioclase is known not to retain the light noble gases He and Ne quantitatively, but separation of more retentive minerals cannot easily be achieved. Also, the isotopic composition of magmatic He in these lavas is not very well constrained. Hilton et al. (1993) report 3 He/ 4 He ratios between 0.8 and 6.0 R A (R A = 1.39x10 -6 is the 3 He/ 4 He ratio in the atmosphere) for olivine and clinopyroxene phenocrysts from CVZ lavas. Such a range of compositions

  17. Mechanism of fission of neutron-deficient actinoids nuclides

    International Nuclear Information System (INIS)

    Sueki, Keisuke; Nakahara, Hiromichi; Tanase, Masakazu; Nagame, Yuichiro; Shinohara, Nobuo; Tsukada, Kazuaki.

    1996-01-01

    A heavy ion reaction ( 19 F+ 209 Bi) is selected. The reaction produces neutron-deficient 228 U which is compound nucleus with a pair of Rb(z=37) and Cs(Z=55). Energy dissipation problem of nucleus was studied by measuring the isotope distribution of two fissile nuclides. Bismuth metal evaporated on aluminium foil was irradiated by 19 F with the incident energy of 105-128 MeV. We concluded from the results that the excess energy of reaction system obtained with increasing the incident energy is consumed by (1) light Rb much more than Cs and (2) about 60% of energy is given to two fission fragments and the rest 40% to the translational kinetic energy or unknown anomalous γ-ray irradiation. (S.Y.)

  18. Method of separating radioactive nuclides from ion exchange resins

    International Nuclear Information System (INIS)

    Suzuki, Kazunori; Saikoku, Masami; Taneta, Daisuke; Yagi, Takuro.

    1987-01-01

    Purpose: To enable to safely process radioactive nuclides from spent ion exchange resins by using existent processing facilities. Method: Ion exchange resins in aqueous medium are at first placed to the ultrasonic wave irradiation site and put into such a state where clads and resins are easily separatable from each other by weakening the bonding force between them. Since the clads are magnetic material such as Fe 3 O 4 or NiFe 2 O 4 , the clads can be collected in the direction of the magnetic force by exerting the magnetic field simultaneously. The collected clads are transported by means of the aqueous medium to a collecting tank by removing the effect of magnetic field, for example, by interrupting the current supply to the electromagnet. Finally, they were subjected to stabilization and fixation into inorganic hardening agent such as cement hardener. Thus, processions can be made safely by using existent facilities. (Takahashi, M.)

  19. Nuclide creation and annealing reactor waste in neutron fields

    International Nuclear Information System (INIS)

    Kondrat'ev, V.N.; Kadenko, I.M.

    2007-01-01

    We consider chemical elements in the Universe (their properties and transmutations) as a fuel powering an evolution of stars, galaxies, etc. The nuclear fusion reactions represent an energy source of stars and, in particular, the Sun fitting the life on the Earth. This brings a question on an origin and conditions for creation of life. We discuss some specific features of nuclear reaction chains at the hydrostatic burning of nuclides in stars and treaties for development of thermonuclear fusion reactors at the Earth based environment. The nova and supernova give promising astrophysical site candidates for synthesis of heavy atomic nuclei and renewing other nuclear components. Such an explosive nucleosynthesis yields the actinides containing basic fuel for nuclear fission reactors, among others. We briefly outline the e-, s-, and r-processes while accounting for ultra-strong stellar magnetization, and discuss some ideas for annealing the radioactive toxic nuclear waste

  20. Radiometric dating by alpha spectrometry on uranium series nuclides

    International Nuclear Information System (INIS)

    Wijk, A. van der.

    1987-01-01

    This thesis describes the analytical and technical procedures that are required for routine application of both the 230 Th/ 234 U disequilibrium dating method for peat and the 210 Pb dating method for lake sediments. Its principal aim is to test, refine and discuss the reliability and validity of these methods. On the other hand, the analytical procedures that were introduced open a wide range of other interesting fields of research that are not necessarily restricted to geological problems only. Chapter 5 reports an obviously not foreseen application: detection of alpha emitting nuclides released in the first weeks of May, 1986 during the accident with the nuclear power plant in Chernobyl, USSR. 128 refs.; 43 figs.; 15 tabs

  1. Radioactive fallout nuclides in a peat-bog ecosystem

    International Nuclear Information System (INIS)

    Pausch, G.; Hofmann, W.; Steger, F.; Tuerk, R.

    1996-01-01

    The Province of Salzburg belongs to the regions with the highest contamination from the Chernobyl-fallout outside the former USSR. The peat-bog investigated in this study is situated in Koppl, east of Salzburg. A peat-bog is a special example of an ecosystem, which is generally not disturbed by human activities because it is under strict nature-conservation and whose soil structure is not affected by animal activities from moles and earthworms. Peat-bogs are characterized by acidic soils which are high in organic material and low in clay mineral content. A number of previous studies have demonstrated that especially in peat-bogs and especially in the Koppl-peat-bog very high amounts of radioactive fallout nuclides from the Chernobyl accident and from the bomb-testings could be found

  2. Difficulty in the usage of nuclides in hospitals

    International Nuclear Information System (INIS)

    Ueda, Hideo

    1980-01-01

    In Japan, the uses of radioisotopes in hospitals are increasing year after year. Therefore, the problems of the treatment and disposal of radioactive wastes are important. The liquid and gaseous wastes with radioactivity concentrations below the maximum permissible levels are allowed to be disposed of on the sites by the law. However, high-level liquid wastes and solid wastes cannot be disposed of on the sites. These wastes stored in steel drums are collected by Japan Radioisotope Association, and finally treated and disposed of on the site of Japan Atomic Energy Research Institute. The nuclides used in hospitals are principally Tc-99m, and also 131 I, 198 Au, 125 I and 3 H. The following matters are described: the present situation, radioactive wastes from medical treatments, and the management of radioactive solid, liquid and gaseous wastes from hospitals. (J.P.N.)

  3. Mechanism of fission of neutron-deficient actinoids nuclides

    Energy Technology Data Exchange (ETDEWEB)

    Sueki, Keisuke; Nakahara, Hiromichi [Tokyo Metropolitan Univ., Hachioji (Japan). Faculty of Science; Tanase, Masakazu; Nagame, Yuichiro; Shinohara, Nobuo; Tsukada, Kazuaki

    1996-01-01

    A heavy ion reaction ({sup 19}F+{sup 209}Bi) is selected. The reaction produces neutron-deficient {sup 228}U which is compound nucleus with a pair of Rb(z=37) and Cs(Z=55). Energy dissipation problem of nucleus was studied by measuring the isotope distribution of two fissile nuclides. Bismuth metal evaporated on aluminium foil was irradiated by {sup 19}F with the incident energy of 105-128 MeV. We concluded from the results that the excess energy of reaction system obtained with increasing the incident energy is consumed by (1) light Rb much more than Cs and (2) about 60% of energy is given to two fission fragments and the rest 40% to the translational kinetic energy or unknown anomalous {gamma}-ray irradiation. (S.Y.)

  4. IDGAM. A PC code and database to help nuclide identification in activation analysis

    International Nuclear Information System (INIS)

    Paviotti Corcuera, R.; Moraes Cunha, M. de; Jayanthi, K.A.

    1994-01-01

    The document describes a PC diskette containing a code and database which helps researchers to identify the nuclides in a radioactive sample. Data can be retrieved by gamma-ray energy, nuclide or element. The PC diskette is available, costfree, from the IAEA Nuclear Data Section, upon request. (author). 6 refs, 5 figs

  5. Accelerator produced nuclides for use in biology and medicine. A bibliography, 1939--1973

    International Nuclear Information System (INIS)

    Christman, D.R.; Karlstrom, K.I.; Fowler, J.; Lambrecht, R.; Wolf, A.P.

    1975-04-01

    A bibliography of more than 1300 references on accelerator-produced nuclides for use in biology and medicine is presented. The information is arranged by subject and by specific nuclide. An author index is included. Appendices are provided of medical uses of specific elements and of radioisotopes not included in the main bibliography. (U.S.)

  6. A nuclide transfer model for barriers of the seabed repository using response function

    International Nuclear Information System (INIS)

    Lee, Youn Myoung; Kang, Chul Hyung; Hahn, Pil Soo

    1996-01-01

    A nuclide transfer by utilizing mass transfer coefficient and barrier response function defined for each barrier is proposed, by which the final nuclide transfer rate into the sea water can be evaluated. When simple and immediate quantification of the nuclide release is necessary in the conservative aspect, using this kind of approach may be advantageous since each layered barrier can be treated separately from other media in series in the repository system, making it possible to apply separate solutions in succession to other various media. Although one disadvantage is that while flux continuity can be maintained at the interface by using the exit nuclide flux from the first medium as the source flux for the next one, there may be no guarantee for concentration continuity, this problem could be eliminated assuming that there is no boundary resistance to mass transfer across the interface. Mass transfer coefficient can be determined by the assumption that the nuclide concentration gradient at the interface between adjacent barriers remains constant and barrier response function is obtained from an analytical expression for nuclide flow rate out of each barrier in response to a unit impulse into the barrier multiplied by mass transfer coefficient. Total time-dependent nuclide transfer rate from the barrier can then be obtained by convoluting the response function for the barrier with a previously calculated set of time-varying input of nuclide flow rate for the previous barrier. 18 refs., 5 figs. (author)

  7. Evaluation of nuclides with closely spaced values of depletion constants in transmutation chains

    International Nuclear Information System (INIS)

    Vukadin, Z.S.

    1977-01-01

    New method of calculating nuclide concentrations in a transmutation chain is developed in this thesis. Method is based on originally derived recurrence formulas for expansion series of depletion functions and on originally obtained, nonsingular, Bateman coefficients. Explicit expression for the nuclide concentrations in a transmutation chain is obtained. This expression can be used as it stands for arbitrary values of nuclides depletion constants. By computing hypothetical transmutation chains and neptunium series, method is compared with the Bateman analytical solution, with the approximate solutions and with the matrix exponential method. It comes out that the method presented in this thesis is suitable for calculating very long depletion chains even in the case of some closely spaced and/or equal values of nuclide depletion constants. Though, presented method is of great practical applicability in a number of nuclear physics problems that are dealing with the nuclide transmutations: starting from the studies of the stellar evolution up to the design of nuclear reactors (author) [sr

  8. Cosmogenic Radionuclides in Recently Fallen Chondrites Mihonoseki and Tahara

    Science.gov (United States)

    Shima, M.; Honda, M.; Yabuki, S.; Takahashi, K.

    1993-07-01

    comparison, while for Mihonoseki only (3) was used. The difficulty was to prepare a suitable mock sample having the same density as chondrites 3.5. Especially for a large sample like Mihonoseki, even when we use about equal fractions of olivine sand and metallic iron, the weight of the mock was about 80%, and when we intend to obtain heavier than 90%, we have to use a larger portion of metallic iron, which causes some reductions in the efficiencies of 20-30%, depending on energies. Results: The contents of 14 gamma emitters were studied as shown in the Table (which appears in the hard copy). Errors quoted are only from counting statistics. The most striking may be to learn that Mihonoseki contains a very low level of 60Co; the content is lower than 1 dpm/kg, which could not be determined accurately by a current-direct gamma counting. This reflects the smaller preatmospheric size of the body, and consistent with other observations such as 22Ne/21Ne = 1.180 [1] and lower activity levels of general products such as 46 dpm 26Al/kg, which is about three-fourths of a common level among L chondrites. Besides, relatively high 56Co in respect to 58Co is also noticed in Mihonoseki. References: [1] Shima M. et al.(1993) LPSC XXIV 1297-1298. [2] Shima M. et al.(1993) Meteoritical Bull., in press.

  9. Scoping calculation of nuclides migration in engineering barrier system for effect of volume expansion due to overpack corrosion and intrusion of the buffer material

    International Nuclear Information System (INIS)

    Yoshita, Takashi; Ishihara, Yoshinao; Ishiguro, Katsuhiko; Ohi, Takao; Nakajima, Kunihiko

    1999-11-01

    Corrosion of the carbon steel overpack leads to a volume expansion since the specific gravity of corrosion products is smaller than carbon steel. The buffer material is compressed due to the corrosive swelling, reducing its thickness and porosity. On the other hand, buffer material may be extruded into fractures of the surrounding rock and this may lead to a deterioration of the planned functions of the buffer, including retardation of nuclides migration and colloid filtration. In this study, the sensitivity analyses for the effect of volume expansion and intrusion of the buffer material on nuclide migration in the engineering barrier system are carried out. The sensitivity analyses were performed on the decrease in the thickness of the buffer material in the radial direction caused by the corrosive swelling, and the change in the porosity and dry density of the buffer caused by both compacting due to corrosive swelling and intrusion of buffer material. As results, it was found the maximum release rates of relatively shorter half-life nuclides from the outside of the buffer material decreased for taking into account of a volume expansion due to overpack corrosion. On the other hand, the maximum release rates increased when the intrusion of buffer material was also taking into account. It was, however, the maximum release rates of longer half-life nuclides, such as Cs-137 and Np-237, were insensitive to the change of buffer material thickness, and porosity and dry density of buffer. (author)

  10. In situ dating on Mars: A new approach to the K-Ar method utilizing cosmogenic argon

    Science.gov (United States)

    Cassata, William S.

    2014-01-01

    Cosmogenic argon isotopes are produced in feldspars via nuclear reactions between cosmic rays and Ca and K atoms within the lattice. These cosmogenic isotopes can be used as proxies for K and Ca, much like nuclear reactor-derived 39Ar and 37Ar are used as proxies for K and Ca, respectively, in 40Ar/39Ar geochronology. If Ca and K are uniformly distributed, then the ratio of radiogenic 40Ar (40Ar*) to cosmogenic 38Ar or 36Ar (38Arcos or 36Arcos) is proportional to the difference between the radioisotopic and exposure ages, as well as the K/Ca ratio of the degassing phase. Thus cosmogenic, radiogenic, and trapped Ar isotopes, all of which can be measured remotely and are stable over geologic time, are sufficient to generate an isochron-like diagram from which the isotopic composition of the trapped component may be inferred. Such data also provide a means to assess the extent to which the system has remained closed with respect to 40Ar*, thereby mitigating otherwise unquantifiable uncertainties that complicate the conventional K-Ar dating method.

  11. Holocene glacial history of the west Greenland Ice Sheet inferred from cosmogenic exposure ages and threshold lakes

    DEFF Research Database (Denmark)

    Larsen, Nicolaj Krog; Kjaer, K. H.; Colding, Sune Oluf

    2011-01-01

    In this study, we use a combination of 10Be exposure ages and threshold lakes to constrain the ice sheet history in Godthåbs- and Buksefjorden, west Greenland (63-64°N) during the Holocene. The 10Be cosmogenic exposure ages have been used to quantify both the ice retreat and thinning of the west...

  12. New Applications of Cosmogenic Radioactive Isotopes to Study Water Travel Times

    Science.gov (United States)

    Visser, A.; Thaw, M.; Deinhart, A.; Bibby, R. K.; Esser, B.

    2017-12-01

    The travel time of water moving through a landscape influences nutrient dynamics and biogeochemical cycles. Constraining water travel times helps to understand the functioning of the critical zone. Water travel times cannot be observed directly but can be constrained by measurements of cosmogenic radioactive isotopes. We studied a small (4.6 km2) subalpine (1660-2117 m) catchment in a Mediterranean climate (8 °C, 1200 mm/yr) in the California Sierra Nevada to assess subsurface water storage dynamics and investigate flow paths and flow velocities. We analyzed a combination of three cosmogenic radioactive isotopes with half-lives varying from 87 days (sulfur-35), 2.6 years (sodium-22) to 12.3 years (tritium) in precipitation and stream samples. Water stable isotopes and solute chemistry aided the interpretation of the cosmogenic isotopes. Tritium samples (1L) are analyzed by noble gas mass spectrometry after helium-3 accumulation. Samples for sulfur-35 and sodium-22 are collected by processing 20-1000 L of water through an anion and cation exchange column in-situ. Sulfur-35 is analyzed by liquid scintillation counting after chemical purification and precipitation. Sodium-22 is analyzed by gamma counting after eluting the cations into a 4L Marinelli beaker. Monthly collected precipitation samples show variability of deposition rate for tritium and sulfur-35. Sodium-22 levels in cumulative yearly precipitation samples are consistent with recent studies in the US and Japan. The observed variability of deposition rates complicates direct use as decaying age tracers. The level and variability of tritium in monthly stream samples indicate a mean residence time on the order of 10 years and only small contributions of younger water during high flow conditions. Sulfur-35 and sodium-22 concentrations were critically interpreted considering possible uptake by vegetation and cation exchange. Detections of sodium-22 confirm a small fraction of younger (water. Low concentrations

  13. Coupling erosion and topographic development in the rainiest place on Earth: Reconstructing the Shillong Plateau uplift history with in-situ cosmogenic 10Be

    Science.gov (United States)

    Rosenkranz, Ruben; Schildgen, Taylor; Wittmann, Hella; Spiegel, Cornelia

    2018-02-01

    The uplift of the Shillong Plateau, in northeast India between the Bengal floodplain and the Himalaya Mountains, has had a significant impact on regional precipitation patterns, strain partitioning, and the path of the Brahmaputra River. Today, the plateau receives the highest measured yearly rainfall in the world and is tectonically active, having hosted one of the strongest intra-plate earthquakes ever recorded. Despite the unique tectonic and climatic setting of this prominent landscape feature, its exhumation and surface uplift history are poorly constrained. We collected 14 detrital river sand and 3 bedrock samples from the southern margin of the Shillong Plateau to measure erosion rates using the terrestrial cosmogenic nuclide 10Be. The calculated bedrock erosion rates range from 2.0 to 5.6 m My-1, whereas catchment average erosion rates from detrital river sands range from 48 to 214 m My-1. These rates are surprisingly low in the context of steep, tectonically active slopes and extreme rainfall. Moreover, the highest among these rates, which occur on the low-relief plateau surface, appear to have been affected by anthropogenic land-use change. To determine the onset of surface uplift, we coupled the catchment averaged erosion rates with topographic analyses of the plateau's southern margin. We interpolated an inclined, pre-incision surface from minimally eroded remnants along the valley interfluves and calculated the eroded volume of the valleys carved beneath the surface. The missing volume was then divided by the volume flux derived from the erosion rates to obtain the onset of uplift. The results of this calculation, ranging from 3.0 to 5.0 Ma for individual valleys, are in agreement with several lines of stratigraphic evidence from the Brahmaputra and Bengal basin that constrain the onset of topographic uplift, specifically the onset of flexural loading and the transgression from deltaic to marine deposition. Ultimately, our data corroborate the

  14. Decontamination of contaminated oils with radio nuclides using magnetic fields

    International Nuclear Information System (INIS)

    Gutierrez R, C. E.

    2011-01-01

    The present work is focused in to find a solution to the wastes treatment that are generated during the maintenance to the nuclear power industry, the specify case of the contaminated oils with radio nuclides, for this purpose was necessary to make a meticulous characterization of the oils before the treatment proposal using advanced techniques, being determined the activity of them, as well as their physical-chemical characteristics. By means of the developed procedure that combines the use of magnetic fields and filtration to remove the contaminated material with radioactive particles, is possible to diminish the activity of the oils from values that oscillate between 6,00 and 10,00 up to 0,00 to 0,0003 Bq/ml. The decontamination factor of the process is of 99.00%. The proposal of the necessary technology for to decontaminate the oils is also made and is carried out the economic analysis based on the reuse of these, as well as the calculation of the avoided damages. (Author)

  15. Inventory simulation tools: Separating nuclide contributions to radiological quantities

    Science.gov (United States)

    Gilbert, Mark R.; Fleming, Michael; Sublet, Jean-Christophe

    2017-09-01

    The activation response of a material is a primary factor considered when evaluating its suitability for a nuclear application. Various radiological quantities, such as total (becquerel) activity, decay heat, and γ dose, can be readily predicted via inventory simulations, which numerically evolve in time the composition of a material under exposure to neutron irradiation. However, the resulting data sets can be very complex, often necessarily resulting in an over-simplification of the results - most commonly by just considering total response metrics. A number of different techniques for disseminating more completely the vast amount of data output from, in particular, the FISPACT-II inventory code system, including importance diagrams, nuclide maps, and primary knock-on atom (PKA) spectra, have been developed and used in scoping studies to produce database reports for the periodic table of elements. This paper introduces the latest addition to this arsenal - standardised and automated plotting of the time evolution in a radiological quantity for a given material separated by contributions from dominant radionuclides. Examples for relevant materials under predicted fusion reactor conditions, and for bench-marking studies against decay-heat measurements, demonstrate the usefulness and power of these radionuclide-separated activation plots. Note to the reader: the pdf file has been changed on September 22, 2017.

  16. Inventory simulation tools: Separating nuclide contributions to radiological quantities

    Directory of Open Access Journals (Sweden)

    Gilbert Mark R.

    2017-01-01

    Full Text Available The activation response of a material is a primary factor considered when evaluating its suitability for a nuclear application. Various radiological quantities, such as total (becquerel activity, decay heat, and γ dose, can be readily predicted via inventory simulations, which numerically evolve in time the composition of a material under exposure to neutron irradiation. However, the resulting data sets can be very complex, often necessarily resulting in an over-simplification of the results – most commonly by just considering total response metrics. A number of different techniques for disseminating more completely the vast amount of data output from, in particular, the FISPACT-II inventory code system, including importance diagrams, nuclide maps, and primary knock-on atom (PKA spectra, have been developed and used in scoping studies to produce database reports for the periodic table of elements. This paper introduces the latest addition to this arsenal – standardised and automated plotting of the time evolution in a radiological quantity for a given material separated by contributions from dominant radionuclides. Examples for relevant materials under predicted fusion reactor conditions, and for bench-marking studies against decay-heat measurements, demonstrate the usefulness and power of these radionuclide-separated activation plots.

  17. User manual of nuclide dispersion in phreatic aquifers model

    International Nuclear Information System (INIS)

    Rives, D.E.

    1999-01-01

    The Nuclide Dispersion in Phreatic Aquifers (DRAF) model was developed in the 'Division Estudios Ambientales' of the 'Gerencia de Seguridad Radiologica y Nuclear, Comision Nacional de Energia Atomica' (1991), for the Safety Assessment of Near Surface Radioactive Waste Disposal Facilities. Afterwards, it was modified in several opportunities, adapting it to a number of application conditions. The 'Manual del usuario del codigo DRAF' here presented is a reference document for the use of the last three versions of the code developed for the 'Autoridad Regulatoria Nuclear' between 1995 and 1996. The DRAF model solves the three dimension's solute transport equation for porous media by the finite differences method. It takes into account the advection, dispersion, radioactive decay, and retention in the solid matrix processes, and has multiple possibilities for the source term. There are three versions of the model, two of them for the saturated zone and one for the unsaturated zone. All the versions have been verified in different conditions, and have been applied in exercises of the International Atomic Energy Agency and also in real cases. (author)

  18. Simultaneous determination of actinide and strontium nuclides by extraction chromatography

    International Nuclear Information System (INIS)

    Vajda, N.; Molnar, Zs.

    1999-01-01

    A relatively fast and simple separation procedure has been developed for the simultaneous determination of thorium, uranium, neptunium, plutonium, americium, curium and strontium radionuclides. Most of the isotopes of these elements are long-lived, pure alpha and beta emitters regarded as 'difficult to determine' ones in the literature. Our major goal was to develop a combined procedure capable for the analysis of all these nuclides in the same sample aliquot so that correlations can be revealed without the errors arising due to inhomogeneity of samples when the radionuclides are determined from different sub-samples. The combined procedure has the advantage that sample destruction becomes simpler and faster, too. The chemical procedure consists of co-precipitations for the pre-concentration of groups of chemically similar elements and extraction chromatographic separations for the purification of individual elements. By means of pre-concentration relatively big samples can be treated offering the possibility of low activity measurements that cannot be performed by analysing small sample amounts. Pre-concentration techniques were always chosen in order to improve the selectivity of the following separation steps. (authors)

  19. Development of radioactivity estimation system considering radioactive nuclide movement

    International Nuclear Information System (INIS)

    Fukumura, Nobuo; Miyamoto, Yoshiaki

    2010-01-01

    A radioactivity estimation system considering radioactive nuclide movement is developed to integrate the established codes and the code system for decommissioning of sodium cooled fast reactor (FBR). The former are the codes for estimation of radioactivity movement in sodium coolant of fast reactor which are named SAFFIRE, PSYCHE and TTT. The latter code system is to estimate neutron irradiation activity (COSMARD-RRADO). It is paid special attention to keep the consistency of input data used among these codes and also the simplification of their interface. A new function is added to the estimation system, to estimate minor FP inventory caused by the fission of impurities contained in the coolant and slight fuel material attached on the fuel cladding. To check the evaluation system, the system is applied with radioactivity data of the preceding FBR such as BN-350, JOYO and Monju. Agreement between the analysis results and the measurement is well satisfactory. The uncertainty of the code system is within several tens per cent for the activation of primary coolant (Na-22) and factor of 2-4 for the estimation of radioactivity inventory in sodium coolant. (author)

  20. A comprehensive fuel nuclide analysis at the reprocessing plant

    International Nuclear Information System (INIS)

    Arenz, H.J.; Koch, L.

    1983-01-01

    The composition of spent fuel can be determined by various methods. They rely partially on different information. Therefore the synopsis of the results of all methods permits a detection of systematic errors and their explanation. Methods for determining the masses of fuel nuclides at the reprocessing input point range from pure calculations (shipper data) to mere experimental determinations (volumetric analysis). In between, a mix of ''fresh'' experimental results and ''historical'' data is used to establish a material balance. Deviations in the results obtained by the individual methods can be attributed to the information source, which is unique for the method in question. The methodology of the approach consists of three steps: by paired comparison of the operator analysis (usually volumetric or gravimetric) with remeasurements the error components are determined on a batch-by-batch basis. Using the isotope correlation technique the operator data as well as the remeasurements are checked on an inter-batch basis for outliers, precision and bias. Systematic errors can be uncovered by inter-lab comparison of remeasurements and confirmed by using historical information. Experience collected during the reprocessing of LWR fuel at two reprocessing plants prove the flexibility and effectiveness of this approach. An example is presented to demonstrate its capability in detecting outliers and determining systematic errors. (author)

  1. Baseline concentrations of nuclear fuel waste nuclides in the environment

    International Nuclear Information System (INIS)

    Amiro, B.D.

    1992-04-01

    Protection of the environment is a key issue in the disposal of long-lived radioactive wastes. To assess the implications of undergound disposal, transport models are commonly used to predict radionuclide concentrations in soil and water. However, an appropriate framework needs to be established to ensure that the predicted concentrations do not impose unacceptable environmental impacts. Here, we suggest baseline environmental concentrations of the most important radionuclides in nuclear fuel waste. We summarize background concentrations of the nuclides in soil and surface water, and suggest Environmental Increments (EI) that could be added to soil and water without causing detectable effects. The EI values are based mostly on natural variability, but some alternative methods are used for radionuclides that are very rare in nature. The background concentrations and EI values are most useful as a screening tool to help identify potentially unacceptable concentrations arising from a disposal concept. When available, we also report data on concentrations that have been measured in the environment without causing an observable effect. This review focuses especially on concentrations applicable to the Canadian Precambrian Shield, as part of the Canadian concept of nuclear fuel waste disposal in a deep, stable geological formation

  2. Separation of mobile long-lived nuclides in a simplified reprocessing

    International Nuclear Information System (INIS)

    Fujine, Sachio; Uchiyama, Gunzo; Kihara, Takehiro; Asakura, Toshihide; Sakurai, Tsutomu

    1997-01-01

    Enhancing confinement efficiency of long-lived nuclides in a simplified Purex process is the primary subject of our PARC (Partitioning Conundrum Key) R and D project. Nuclides focused here are all susceptible to diffuse into the environment and highly concerned as potential hazard among the long-lived nuclides in spent fuels. New functions in PARC concept are designed to mitigate the environmental impacts of reprocessing wastes and also to improve the economy of reprocessing in the future. Experimental work has been conducted to demonstrate the feasibility of the concept. (author)

  3. A model on valence state evaluation of TRU nuclides in reprocessing solutions

    International Nuclear Information System (INIS)

    Uchiyama, Gunzo; Fujine, Sachio; Yoshida, Zenko; Maeda, Mitsuru; Motoyama, Satoshi.

    1998-02-01

    A mathematical model was developed to evaluate the valence state of TRU nuclides in reprocessing process solutions. The model consists of mass balance equations, Nernst equations, reaction rate equations and electrically neutrality equations. The model is applicable for the valence state evaluation of TRU nuclides in both steady state and transient state conditions in redox equilibrium. The valence state which is difficult to measure under high radiation and multi component conditions is calculated by the model using experimentally measured data for the TRU nuclide concentrations, nitric acid and redox reagent concentrations, electrode potential and solution temperature. (author)

  4. A study on nuclide migration in buffer materials and rocks for geological disposal of radioactive waste

    International Nuclear Information System (INIS)

    Sato, Haruo

    1998-01-01

    This thesis summarizes the results investigated in order to establish a basic theory on the predictive method of diffusion coefficients of nuclides in compacted sodium bentonite which is a candidate buffer material and in representative rocks for the geological disposal of radioactive waste by measuring the pore structural factors of the compacted bentonite and rocks such as porosity and tortuosity, measuring diffusion coefficients of nuclides in the bentonite and rocks, acquiring basic data on diffusion and developing diffusion models which can quantitatively predict nuclide migration in long-term. (J.P.N.). 117 refs

  5. Cosmogenic radionuclide 7Be in atmospheric fallouts, weather factors and solar activity

    International Nuclear Information System (INIS)

    Kungurov, F.R.

    2011-11-01

    Key words: 7 Be activity, atmospheric fallouts, solar activity, gamma spectroscopy. Subjects of research: cosmogenic radionuclide 7 Be in atmospheric fallouts and surrounding objects of environment, its migrational distribution connected to solar activity and weather meteorologic parameters of the region studied. Purpose of work: Defining correlation between atmospheric humidity and solar activity with concentration and distribution of cosmogenic radionuclide 7 Be. Methods of research: gamma-spectrometry method of activity measurements. The results obtained and their novelty: Cycle of research works on definition of concentration and migrational distribution of CRN 7 Be in Samarkand region during 2002-2005 was carried out for the first time. Volumetric activity of 7 Be in squat air layer of Samarkand was determined. Average density of 7 Be fallouts for the four years of studies was determined. Qualitative correlation bet ween 7 Be fallouts density variations and solar activity, expressed through Wolf number has been found. Qualitative correlation between 7 Be fallouts density variations and amount of precipitations has been found. Regularity in 7 Be concentration decrease towards north latitudes has been detected. Practical value: Developed scintillation method of 7 Be activity detection in atmospheric fallouts was used in works performed in the framework of republican grants 2F-No 1.2.3, CNT RUz PFNI 2F-No 2.1.39 and ITD-7-024. Methodology was used for the estimation of the velocity of erosion processes in the soils of different regions of Uzbekistan. Methodology is used in the works on 7 Be radioactivity measurements. Degree of embed and economic effectivity: Gained results replenish database on 7 Be isotope distribution on Earth regions and its role in formation of some processes, connected with meteorology, agronomy and radioecology of Samarkand region. Field of application: meteorology, agronomy and radioecology. (author)

  6. No surface breaking on the Ecemiş Fault, central Turkey, since Late Pleistocene (~ 64.5 ka); new geomorphic and geochronologic data from cosmogenic dating of offset alluvial fans

    Science.gov (United States)

    Sarıkaya, M. A.; Yıldırım, C.; Çiner, A.

    2015-05-01

    The Ecemiş Fault Zone (EF) has been recognized as a major left lateral strike-slip fault in the Central Anatolian Fault Zone (CAFZ) of Turkey. However, its Quaternary slip-rate has been challenging to determine due to the difficulty of dating offset markers. Using high-precision offset measurements and 36Cl cosmogenic nuclide dating, we present the first geochronologically determined Late Quaternary slip-rate for the EF. Our study focuses on the excellent exposures of offset alluvial fan surfaces, originating from the Aladağlar, a Late Quaternary glaciated mountain. Analysis of airborne orthophotogrametry and GNSS (Global Navigation Satellite System) surveys indicates 168 ± 2 m left lateral and 31 ± 1 m vertical displacements. In-situ terrestrial cosmogenic 36Cl geochronology obtained from eleven surface boulders provides a minimum abandonment/incision age of 104.2 ± 16.5 ka for the oldest offset alluvial fan surface. Our geomorphic observations together with Self-potential geophysical surveys revealed the presence of an unfaulted alluvial fan terrace, which allows us to constrain the timing of deformation. The abandonment/incision age of this fan is 64.5 ± 5.6 ka based on thirteen 36Cl depth profile samples. Accordingly, we obtained a geologic fault slip-rate of 4.2 ± 1.9 mm a- 1 horizontally and 0.8 ± 0.3 mm a- 1 vertically for the time frame between 104.2 ± 16.5 ka and 64.5 ± 5.6 ka. Our analysis indicates that the EF has not been producing a major surface breaking earthquake on the main strand at least since 64.5 ± 5.6 ka (mid-Late Pleistocene). This could be the result of abandonment of the main strand and accommodation of deformation by other faults within the EF. Nevertheless, a recently occurred (30 September 2011) low magnitude (ML: 4.3) left lateral strike-slip earthquake indicates recent seismic activity of the EF. Comparison of the recent GPS velocity field with the longer slip history along the CAFZ indicates a constant but low strain

  7. The determination of irradiation and so-called terrestrial ageing of rock meteorites based on the cosmogenic resulting radionuclides 53Mn and 26Al

    International Nuclear Information System (INIS)

    Englert, P.

    1979-01-01

    The contents of cosmogenic occuring 53 Mn was determined by neutron activation in over 90 samples of 75 individual rock meteorites. The distinct depth effect of the 53 Mn production rate in rock meteorites could be measured by a depth profile at LL6 chondrite St. Severin (falling weight 271 kg). The experimental results confirm the present model concepts. By comparing with the spallogenic 22 Ne/ 21 Ne and 3 He/ 21 Ne ratios applicable as depth indicators, one could derive linear relationships suitable for correcting 53 Mn. They enable the determination of the average 53 Mn production rate from the saturation activities of long-term irradiated meteorites. Using this method it was possible to calculate the irradiation age of 40 rock meteorites. As 26 Al is formed with a similar effective cross-section to 53 Mn, the production rate ratio 53 Mn: 26 Al was also taken to derive the depth-independent irradiation ages. A method to determine the depth-independent terrestrial ageing of meteriorites has been developed based on the same isotope ratio, the effective field of application is between 0.10 to 2x10 6 a. Furthermore, an attempt was made to draw up the dependence of noble gas contents of 53 Mn resp. 53 Mn/ 26 Al irradiation age for the new determination of the 3 He, 21 Ne and 38 Ar production rates by means of a linear regression analysis. (orig./RB) [de

  8. Discussion on effective utilization of nuclear fuel based on peculiar property of the fifth unstable nuclide series

    International Nuclear Information System (INIS)

    Zhang Jiahua

    2000-01-01

    Based on a peculiar property of the Fifth Unstable Nuclide Series (FUNS) in developing stage, namely the transformation rate of parent fuel- 238 U consumption to fission production being increased with the fuel's reactor core life, it was shown that the used fuel taken out from the reactor core of PWR could be used again as PWR fuel, and the post processing for the used fuel needed only to de-contaminate the fission products from the used fuel and then to rebuild it into its normal form. Scheme A discussed the condition of using such rebuilt used fuel in PWR. Another peculiar property of FUNS is characterized by the fact that the equilibrium saturate concentrations of the derived nuclides in FUNS are different for different types of reactor. It is well known that the saturate concentration of 239 Pu in PWR is much larger than that in HWR. Scheme B i.e. a method of using the rebuilt used fuel from PWR to replace the natural uranium fuel for HWR was discussed

  9. Cosmogenic Radionuclides in Antarctic Meteorites: Preliminary Results on Terrestrial Ages and Temporal Phenomena

    Science.gov (United States)

    Michlovich, E.; Vogt, S.; Wolf, S. F.; Elmore, D.; Lipschutz, M. E.

    1993-07-01

    Since 1969, more than 15,000 meteorites have been recovered from various sites in Antarctica. Differences have been reported between the Antarctic populations and the population of non-Antarctic meteorites in volatile trace- element content, thermoluminescence properties, physical size, and relative distribution of meteorite type [1]. Lipschutz and Samuels [2] developed a method based upon multivariate linear and logistic regression that they applied to interpret trace-element content in Antarctic and non-Antarctic meteorites, showing that the two populations can be chemically distinguished. Since Antarctic meteorites have, on the whole, much longer terrestrial ages than non-Antarctic falls, such differences have been used to support the notion that the flux of meteorites sampled by the Earth has changed in the recent past. A subsequent study [3] showed a statistically significant difference in trace-element content between meteorites from Victoria Land and those found in Queen Maud Land, two groups that seem to have different terrestrial age distributions. Changes in meteorite flux patterns on the order of 60 yr are indicated from a study of Cluster 1 vs. non-Cluster 1 falls [4]. Rapid fluctuations would almost certainly require the existence of co-orbital meteoroid streams, an idea that has been criticized by some [5] on dynamical grounds. To quantify the discussion of a temporal dependence of meteorite flux patterns, and to continue systematic study of Antarctic meteorites, we have measured the contents of the cosmogenic radionuclides ^10Be and ^26Al in the bulk phase, and ^36Cl in the metal phase, of 40 Antarctic specimens that are from the same suite of samples analyzed in the trace-element studies and that were chosen to minimize any chances of paired meteorites. The means and standard deviations of ^10Be and ^26Al activities are 16.4 +/- 3.5 and 48 +/- 8 dpm/kg respectively. Correction for cosmic ray exposure [6,7] and terrestrial ages allows us to estimate

  10. Fate of nuclides in natural water systems. Annual progress report, April 1, 1983-March 31, 1984

    International Nuclear Information System (INIS)

    Turekian, K.K.

    1983-01-01

    This study of the behavior of nuclides in natural water systems is divided into studies of atmospheric aerosols, soils, groundwater, rivers, estuaries and coastal zones, the carbon cycle and the growth rates of marine organisms

  11. Nuclide identifier and grat data reader application for ORIGEN output file

    International Nuclear Information System (INIS)

    Arif Isnaeni

    2011-01-01

    ORIGEN is a one-group depletion and radioactive decay computer code developed at the Oak Ridge National Laboratory (ORNL). ORIGEN takes one-group neutronics calculation providing various nuclear material characteristics (the buildup, decay and processing of radioactive materials). ORIGEN output is a text-based file, ORIGEN output file contains only numbers in the form of group data nuclide, nuclide identifier and grat. This application was created to facilitate data collection nuclide identifier and grat, this application also has a function to acquire mass number data and calculate mass (gram) for each nuclide. Output from these applications can be used for computer code data input for neutronic calculations such as MCNP. (author)

  12. Attempt to enrich of a new spontaneous fissioning nuclide by evaporation of natural brine

    International Nuclear Information System (INIS)

    Adamek, A.; Zhuravleva, E.L.; Constantinescu, M.; Constantinescu, o.; Chuburkov, Yu.T.

    1983-01-01

    The enrichment of the new spontaneous fissioning nuclide discovered in the Cheleken brine, was made by evaporation. The purpose of this work was the comparison of behaviour of the new spontaneous fissioning nuclide with that of the known elements in the formation processes of the high concentration brines. Spontaneous fission of the nuclide was measured by means of the counters for multiple emission of neutrons. It is shown that the new spontaneous fissioning nuclide was enriched as well as other trace elements (Hg, Tl, Bi and Pb) in a solution remained after the evaporation of the initial solution. The conclusion is drawn that from the sea water brines could be obtained by evaporation which are enriched in trace elements with an enrichment degree higher than the natural brines

  13. Preparation of tracing source layer in simulation test of nuclide migration

    International Nuclear Information System (INIS)

    Zhao Yingjie; Ni Shiwei; Li Weijuan; Yamamoto, T.; Tanaka, T.; Komiya, T.

    1993-01-01

    In cooperative research between CIRP and JAERI on safety assessment for shallow land disposal of low level radioactive waste, a laboratory simulation test of nuclide migration was carried out, in which the undisturbed loess soil column sampled from CIRP' s field test site was used as testing material, three nuclides, Sr-85, Cs-137 and Co-60 were used as tracers. Special experiment on tracing method was carried out, which included measuring pH value of quartz sand in HCl solution, determining the eligible water content of quartz sand as tracer carrier, measuring distribution uniformity of nuclides in the tracing quartz sand, determining elution rate of nuclides from the tracing quartz sand and detecting activity uniformity of tracing source layer. The experiment results showed that the tracing source layer, in which fine quartz sand was used as tracer carrier, satisfied expected requirement. (1 fig.)

  14. Modeling for Colloid and Chelator Facilitated Nuclide Transport in Radioactive Waste Disposal System

    International Nuclear Information System (INIS)

    Lee, Youn Myoung; Jeong, Jong Tae

    2010-08-01

    A modeling study and development of a total system performance assessment (TSPA) program template, by which assessment of safety and performance for a radioactive waste repository with normal and/or abnormal nuclide release cases can be made has been developed. Colloid and chelator facilitated transport that is believed to result for faster nuclide transport in various mediabothinthegeosphereandbiospherehas been evaluated deterministically and probabilistically to demonstrate the capability of the template developed through this study. To this end colloid and chelator facilitated nuclide transport has been modeled rather strainghtforwardly with assumed data through this study by utilizing some powerful function offered by GoldSim. An evaluation in view of apparent influence of colloid and chelator on the nuclide transport in the various media in and around a repository system with data assumed are illustrated

  15. International program to improve decay data for transactinium nuclides

    International Nuclear Information System (INIS)

    Helmer, R.G.; Reich, C.W.

    1985-01-01

    To help meet an identified need for precise decay data, in 1977 the IAEA organized an international Coordinated Research Program (CRP) to measure and evaluate half-lives and γ - and α - emission probabilities for selected transactinium nuclides of importance for reactor technology. The CRP goals were (1) to determine a list of data that needed improvement, (2) to encourage new measurements, and (3) to evaluate the available data. All three phases of this work are now complete. Our participation in this effort has involved the measurement of γ-ray emission probabilities for /sup 232, 233, 235/U, /sup 238, 239, 240, 241/Pu, 229 Th and 233 Pa, as well as participating in the data evaluation. The γ-emission probabilities were determined from the measurement of γ-emission rates with the goal of obtaining uncertainties of less than or equal to 1%. γ measurements were made on calibrated Ge detectors. These calibrations were done by standard methods, generally involving measurements at approx. 60 γ-ray energies from 14 to 2700 keV. The efficiency-calibration functions were assigned uncertainties ranging from 2% below 50 keV to 0.50% from 400 to 1400 keV. The determination of the decay rates of the various sources involved several techniques. The 238 Pu, 239 Pu and 240 Pu samples were calibrated by gross α-emission-rate measurements at NBS. The 235 U sample was taken from an NBS-calibrated spike solution. The 241 Pu and 233 U samples were calibrated by isotope-dilution mass spectrometry based on spikes of the calibrated 239 Pu, 240 Pu and 235 U materials. Some of our results are given, together with a comparison of some present and previous results. 20 refs

  16. Some notes on experiments measuring diffusion of sorbed nuclides through porous media

    International Nuclear Information System (INIS)

    Lever, D.A.

    1986-11-01

    Various experimental techniques for measuring the important parameters governing diffusion of sorbed nuclides through water-saturated porous media are described, and the particular parameters obtained from each technique are discussed. Recent experiments in which diffusive transport takes place more rapidly than expected are reviewed. The author recommends that through-transport diffusion experiments are the most satisfactory method of determining whether this arises from surface diffusion of sorbed nuclides. (author)

  17. Novel reprocessing methods with nuclide separation for volume reduction of high level radioactive waste

    International Nuclear Information System (INIS)

    Suzuki, Tatsuya

    2015-01-01

    We have proposed the reprocessing system with nuclide separation processes based on the chromatographic technique in the hydrochloric acid solution system. Our proposing system consists of the dissolution process, the reprocessing process, the MA separation process, and nuclide separation processes. In our proposing processes, the pyridine resin is used as a main separation media. We expect that our proposing will contribute to that volume reduction of high level radioactive waste by combining the transmutation techniques, usage of valuable elements, and so on. (author)

  18. The extraction behavior of some noticeable nuclides in the Tokai reprocessing plant

    International Nuclear Information System (INIS)

    Yamanouchi, T.; Sasao, N.; Ozawa, M.; Yamana, H.

    1987-01-01

    The extraction behavior of some TRU nuclides and Ru-106 were investigated on the basis of the process analytical data obtained during this decade of the hot operation in the Tokai Reprocessing Plant. Some characteristics of their extraction behavior under Tokai-flowsheet became clear. They were explainable by the chemical features of these nuclides in conjunction with the chemical conditions of the process. Some extraction-simulation calculations were performed to supplement the understanding of their characteristic behaviors

  19. Device for determining the gross weight, dose rate, surface contamination and/or nuclide inventory

    International Nuclear Information System (INIS)

    1987-01-01

    Barrels with low nuclide inventories (about 1E6 Bq) and with high inventories (1E13 Bq) are inspected with the barrel inspection system. The system provides a rotating plate, which is part of some scales and a measuring sensor arrangement for this purpose. The surface contamination and nuclide inventories of the 200 litre barrels can be calculated from the weight and radiation detector values. (DG) [de

  20. Field tests on migration of TRU-nuclide, (1). General introduction

    International Nuclear Information System (INIS)

    Ogawa, Hiromichi; Tanaka, Tadao; Mukai, Masayuki

    2003-01-01

    The field migration test using TRU nuclide was carried out as a cooperative research project between JAERI (Japan Atomic Energy Research Institute) and CIRP (China Institute for Radiation Protection). This report introduced the out-line of the field migration test and described the outline of the series of 'Field Test on Migration of TRU-nuclide' and main results as a summary report. (author)

  1. Radioactivity nuclide identification based on BP and LM algorithm neural network

    International Nuclear Information System (INIS)

    Wang Jihong; Sun Jian; Wang Lianghou

    2012-01-01

    The paper provides the method which can identify radioactive nuclide based on the BP and LM algorithm neural network. Then, this paper compares the above-mentioned method with FR algorithm. Through the result of the Matlab simulation, the method of radioactivity nuclide identification based on the BP and LM algorithm neural network is superior to the FR algorithm. With the better effect and the higher accuracy, it will be the best choice. (authors)

  2. Nuclide separation modeling through reverse osmosis membranes in radioactive liquid waste

    OpenAIRE

    Lee, Byung-Sik

    2015-01-01

    The aim of this work is to investigate the transport mechanism of radioactive nuclides through the reverse osmosis (RO) membrane and to estimate its effectiveness for nuclide separation from radioactive liquid waste. An analytical model is developed to simulate the RO separation, and a series of experiments are set up to confirm its estimated separation behavior. The model is based on the extended Nernst–Plank equation, which handles the convective flux, diffusive flux, and electromigration f...

  3. Rate of production of cosmogenic isotopes in the past and solar activity

    International Nuclear Information System (INIS)

    Kocharov, G.E.; Dergachev, V.A.; Gordeichik, N.I.; Ioffe, A.F.

    1975-01-01

    The available experimental data on abundances of 14 C, 10 Be and 26 Al in materials with known ages are analyzed with the aim of determining of solar activity in the past. Based on the authors results on the abundances of 14 C in the tree rings it is shown that concentration of radiocarbon in atmosphere is changed with the period of approximately 60 years, amplitude approcimately 1% and phase shift relatively to solar activity of approximately 10 years. (orig./WBU) [de

  4. Atmospheric radiocarbon calibration to 45,000 yr BP: Late glacial fluctuations and cosmogenic isotope production

    NARCIS (Netherlands)

    Kitagawa, H.; van der Plicht, J.

    1998-01-01

    More than 250 carbon-14 accelerator mass spectrometry dates of terrestrial macrofossils from annually laminated sediments from Lake Suigetsu (Japan) provide a first atmospheric calibration for almost the total range of the radiocarbon method (45,000 years before the present), The results confirm the

  5. Investigation of Nuclide Importance to Functional Requirements Related to Transport and Long-Term Storage of LWR Spent Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Broadhead, B.L.

    1995-01-01

    The radionuclide characteristics of light-water-reactor (LWR) spent fuel play key roles in the design and licensing activities for radioactive waste transportation systems, interim storage facilities, and the final repository site. Several areas of analysis require detailed information concerning the time-dependent behavior of radioactive nuclides including (1) neutron/gamma-ray sources for shielding studies, (2) fissile/absorber concentrations for criticality safety determinations, (3) residual decay heat predictions for thermal considerations, and (4) curie and/or radiological toxicity levels for materials assumed to be released into the ground/environment after long periods of time. The crucial nature of the radionuclide predictions over both short and long periods of time has resulted in an increased emphasis on thorough validation for radionuclide generation/depletion codes. Current radionuclide generation/depletion codes have the capability to follow the evolution of some 1600 isotopes during both irradiation and decay time periods. Of these, typically only 10 to 20 nuclides dominate contributions to each analysis area. Thus a quantitative ranking of nuclides over various time periods is desired for each of the analysis areas of shielding, criticality, heat transfer, and environmental dose (radiological toxicity). These rankings should allow for validation and data improvement efforts to be focused only on the most important nuclides. This study investigates the relative importances of the various actinide, fission-product, and light-element isotopes associated with LWR spent fuel with respect to five analysis areas: criticality safety (absorption fractions), shielding (dose rate fractions), curies (fractional curies levels), decay heat (fraction of total watts), and radiological toxicity (fraction of potential committed effective dose equivalent). These rankings are presented for up to six different burnup/enrichment scenarios and at decay times from 2 to

  6. A Study on the Nuclide Migration and Retardation Using Natural Barrier

    International Nuclear Information System (INIS)

    Baik, Min Hoon; Park, Chung Kyun; Kim, Seung Soo

    2010-02-01

    In this study, we investigated the properties of geochemical reactions and sorption of high-level radionuclides (U, Th, Am, and Np), constructed databases for the geochemical reactions and sorption of the high-level radionuclides, and developed application methodologies of the databases. For the investigation on the nuclide migration and retardation through fractured rocks in KURT, in-situ solute migration system and on-line monitoring system were installed. The migration and retardation behaviors of nuclides were investigated annually for non-sorbing, simply sorbing and multi-valent sorbing nuclides, respectively, and interactions with fracture-filling materials were also analyzed. Besides, researches difficult to perform in KURT were carried out in foreign underground research facilities as joint studies for nuclide and colloid migration. The results from domestic and foreign underground facilities were compared each other and the reliability of the domestic results were assured from this. Diffusion depths of high-level radionuclides into rock matrix were measured in KURT conditions and their diffusion properties were analyzed and evaluated. In addition, the effects of bio-mineralization and redox reactions of a nuclide and microbe on nuclide behaviors were carried out to study the effects of combined interactions between minerals and microbes on the radionuclide migration and retardation

  7. Reconstructing temperatures in the Maritime Alps, Italy, since the Last Glacial Maximum using cosmogenic noble gas paleothermometry

    Science.gov (United States)

    Tremblay, Marissa; Spagnolo, Matteo; Ribolini, Adriano; Shuster, David

    2016-04-01

    The Gesso Valley, located in the southwestern-most, Maritime portion of the European Alps, contains an exceptionally well-preserved record of glacial advances during the late Pleistocene and Holocene. Detailed geomorphic mapping, geochronology of glacial deposits, and glacier reconstructions indicate that glaciers in this Mediterranean region responded to millennial scale climate variability differently than glaciers in the interior of the European Alps. This suggests that the Mediterranean Sea somehow modulated the climate of this region. However, since glaciers respond to changes in temperature and precipitation, both variables were potentially influenced by proximity to the Sea. To disentangle the competing effects of temperature and precipitation changes on glacier size, we are constraining past temperature variations in the Gesso Valley since the Last Glacial Maximum (LGM) using cosmogenic noble gas paleothermometry. The cosmogenic noble gases 3He and 21Ne experience diffusive loss from common minerals like quartz and feldspars at Earth surface temperatures. Cosmogenic noble gas paleothermometry utilizes this open-system behavior to quantitatively constrain thermal histories of rocks during exposure to cosmic ray particles at the Earth's surface. We will present measurements of cosmogenic 3He in quartz sampled from moraines in the Gesso Valley with LGM, Bühl stadial, and Younger Dryas ages. With these 3He measurements and experimental data quantifying the diffusion kinetics of 3He in quartz, we will provide a preliminary temperature reconstruction for the Gesso Valley since the LGM. Future work on samples from younger moraines in the valley system will be used to fill in details of the more recent temperature history.

  8. Synchronizing Greenland ice-core records and the Meerfelder maar sediment record via the global cosmogenic radionuclide signature and insights on climate around 11,230 years BP

    Science.gov (United States)

    Mekhaldi, F.; Czymzik, M.; Brauer, A.; Martin-Puertas, C.; Aldahan, A.; Possnert, G.; Muscheler, R.

    2017-12-01

    The causal investigation of multiple paleoclimate records relies on the accuracy of their respective chronostratigraphy. To achieve relative synchronization, cosmogenic radionuclides are an excellent tool because their common signature is global and can be retrieved and measured in different paleoclimate archives. For instance, 10Be can be measured in both ice cores and lake sediments (Berggren et al., 2013; Czymzik et al., 2016) which allows for both archives to be anchored onto radiocarbon timescales by synchronizing 10Be with 14C. We investigate the period 11,500-11,000 years BP when a short cold climate spell is known, from ice-core proxy records, to have occurred in Greenland shortly after the onset of the Holocene - the Preboreal Oscillation (PBO). This period also coincides with one of the largest and longest-lived increase in 14C production rate during the Holocene, which most likely corresponds to a grand solar minimum (around 11,230-11,000 years BP). In consequence, this period ideally illustrates the potential of using a known and clear signal in the production rate of cosmogenic radionuclides as a synchronizing tool, such as caused by large variations in solar activity. Here we measure 10Be in Meerfelder Maar (a well-dated and widely used sediment record from Germany) around 11,230 years BP which allows us to align the 10Be signal in both the Meerfelder Maar (MFM) sediment record and the GRIP ice core to IntCal13. Doing so, we report that i) the structure of the grand solar minimum is well-preserved in the 10Be signal of MFM sediments, ii) the PBO in Greenland occurs during high levels of solar activity and is not clearly observed in MFM, and iii) the PBO in Greenland ends precisely at the onset of the grand solar minimum at 11,230 years BP which also corresponds to a depositional change in MFM sediments (Martin-Puertas et al., 2017). These results thus suggest that changes in solar activity could have been a forcing at play eventually resulting in the

  9. Distrinution and properties of nuclides in fission by means of on-line isotope separation

    International Nuclear Information System (INIS)

    Nir-El, Y.

    1977-07-01

    This work determines the independent yield distribution fo the alkali elements' fission products. The results were analyzed by especially developed equations and half-lives were calculated using a computer program which fits a series of exponentials to the activity decay curve by the least squares method. Independent yields were determined by use of calculated correction factors and by normalization against a known independent yield. The three nuclides 147 Ba, 148 Ba, and 149 La were indentified fot the first time in this work and their half-lives were determined Comparison with calculated values, within the framework of beta decay theory, gave in all cases agreement better than an order of magnitude. Extrapolation of the experimental curve and prediction of values which have not yet been measured are now possible. Independent yield distributions of rubidium and cesium include values for 99 Rb, 147 Cs and 148 Cs determined for the first time. The last two isotopes were identified fot the first time in the present work. A model was developed to interpretthe heavy wing phenomenon based on statistical considerations and onbasic properties of prompt neutron emission in fission. The width parameter of the independent yield distribution calculated according to the propsed model is in very good agreement with the width parameter of a Gaussian fitted to the measured distribution. (B.G.)

  10. High Accuracy Mass Measurement of the Dripline Nuclides $^{12,14}$Be

    CERN Multimedia

    2002-01-01

    State-of-the art, three-body nuclear models that describe halo nuclides require the binding energy of the halo neutron(s) as a critical input parameter. In the case of $^{14}$Be, the uncertainty of this quantity is currently far too large (130 keV), inhibiting efforts at detailed theoretical description. A high accuracy, direct mass deterlnination of $^{14}$Be (as well as $^{12}$Be to obtain the two-neutron separation energy) is therefore required. The measurement can be performed with the MISTRAL spectrometer, which is presently the only possible solution due to required accuracy (10 keV) and short half-life (4.5 ms). Having achieved a 5 keV uncertainty for the mass of $^{11}$Li (8.6 ms), MISTRAL has proved the feasibility of such measurements. Since the current ISOLDE production rate of $^{14}$Be is only about 10/s, the installation of a beam cooler is underway in order to improve MISTRAL transmission. The projected improvement of an order of magnitude (in each transverse direction) will make this measureme...

  11. Rates of surface lowering and landscape development in southern South Africa: a cosmogenic view

    Science.gov (United States)

    Richardson, Janet; Vanacker, Veerle; Lang, Andreas; Hodgson, David

    2016-04-01

    The landscape of southern South Africa is characterised by large-scale erosion surfaces, including extensive pediments and multiple strath terraces, which document discordant river evolution through resistant quarzitic lithologies of the Cape Fold Belt (CFB). The timing and rate of erosion is poorly constrained. New cosmogenic ages from surfaces in South Africa are presented using in situ produced 10Be. Strath terraces in deeply incised rivers at two sites within the CFB indicate slow rates of erosion (1.54 - 11.79 m/Ma), which are some of the lowest rates recorded globally. Four pediment surfaces and a depth profile of the thickest pediment were also dated, and the results indicate that there are low rates of surface lowering on the pediments (0.44 - 1.24 m/Ma). The pediments are long-lived features (minimum exposure ages of 0.47 - 1.09 Ma), and are now deeply dissected. Given the minimum exposure ages, calculated river incision rates (42- 203 m/Ma) suggest that after a long period of geomorphic stability during pediment formation there was a discrete phase of increased geomorphic activity. The calculated minimum exposure ages are considered dubious because: 1) known rates of surrounding river incision (published and ours); 2) the climate conditions and time necessary for ferricrete formation on the pediment surfaces and; 3) the deeply incised catchments in the CFB on which the pediments sit, which all point to the pediments being much older. The pediments are fossilised remnants of a much larger geomorphic surface that formed after the main phase of exhumation in southern Africa. They form a store of sediment that currently sit above the surrounding rivers that have some of the lowest erosion rates in the world. These results indicate that steep topography can prevail even in areas of low erosion and tectonic quiescence, and that whilst cosmogenic dating of landscapes is an exciting development in earth sciences, care is needed especially in ancient settings. We

  12. Travel Times of Water Derived from Three Naturally Occurring Cosmogenic Radioactive Isotopes

    Science.gov (United States)

    Visser, Ate; Thaw, Melissa; Deinhart, Amanda; Bibby, Richard; Esser, Brad

    2017-04-01

    Hydrological travel times are studied on scales that span six orders of magnitude, from daily event water in stream flow to pre-Holocene groundwater in wells. Groundwater vulnerability to contamination, groundwater surface water interactions and catchment response are often focused on "modern" water that recharged after the introduction of anthropogenic tritium in precipitation in 1953. Shorter residence times are expected in smaller catchments, resulting in immediate vulnerability to contamination. We studied a small (4.6 km2) alpine (1660-2117 m) catchment in a Mediterranean climate (8 ˚ C, 1200 mm/yr) in the California Sierra Nevada to assess subsurface storage and investigate the response to the recent California drought. We analyzed a combination of three cosmogenic radioactive isotopes with half-lives varying from 87 days (sulfur-35), 2.6 years (sodium-22) to 12.3 years (tritium) in precipitation and stream samples. Tritium samples (1 L) are analyzed by noble gas mass spectrometry after helium-3 accumulation. Samples for sulfur-35 and sodium-22 are collected by processing 20-1000 L of water through an anion and cation exchange column in-situ. Sulfur-35 is analyzed by liquid scintillation counting after chemical purification and precipitation. Sodium-22 is analyzed by gamma counting after eluting the cations into a 4L Marinelli beaker. Monthly collected precipitation samples show variability of deposition rate for tritium and sulfur-35. Sodium-22 levels in cumulative yearly precipitation samples are consistent with recent studies in the US and Japan. The observed variability of deposition rates complicates direct estimation of stream water age fractions. The level and variability of tritium in monthly stream samples indicate a mean residence time on the order of 10 years and only small contributions of younger water during high flow conditions. Estimates of subsurface storage are in agreement with estimates from geophysical studies. Detections of sodium-22

  13. Removal of round off errors in the matrix exponential method for solving the heavy nuclide chain

    International Nuclear Information System (INIS)

    Lee, Hyun Chul; Noh, Jae Man; Joo, Hyung Kook

    2005-01-01

    Many nodal codes for core simulation adopt the micro-depletion procedure for the depletion analysis. Unlike the macro-depletion procedure, the microdepletion procedure uses micro-cross sections and number densities of important nuclides to generate the macro cross section of a spatial calculational node. Therefore, it needs to solve the chain equations of the nuclides of interest to obtain their number densities. There are several methods such as the matrix exponential method (MEM) and the chain linearization method (CLM) for solving the nuclide chain equations. The former solves chain equations exactly even when the cycles that come from the alpha decay exist in the chain while the latter solves the chain approximately when the cycles exist in the chain. The former has another advantage over the latter. Many nodal codes for depletion analysis, such as MASTER, solve only the hard coded nuclide chains with the CLM. Therefore, if we want to extend the chain by adding some more nuclides to the chain, we have to modify the source code. In contrast, we can extend the chain just by modifying the input in the MEM because it is easy to implement the MEM solver for solving an arbitrary nuclide chain. In spite of these advantages of the MEM, many nodal codes adopt the chain linearization because the former has a large round off error when the flux level is very high or short lived or strong absorber nuclides exist in the chain. In this paper, we propose a new technique to remove the round off errors in the MEM and we compared the performance of the two methods

  14. Cosmogenic 10Be Dating of Early and Latest Holocene Moraines on Nevado Salcantay in the Southern Peruvian Andes

    Science.gov (United States)

    Licciardi, J. M.; Schaefer, J. M.; Lund, D. C.

    2007-12-01

    A two-fold sequence of nested lateral and end moraines was mapped in a glacial trough emanating from the southwest flank of Nevado Salcantay (6271 m; ~13°S latitude), the highest peak in the Cordillera Vilcabamba of southern Peru. The field area is situated 25 km due south of the archaeological site of Machu Picchu. Outer and inner moraines in the sequence were deposited by valley glaciers that terminated ~5 km and ~3 km, respectively, from their headwall on the Salcantay summit massif. Cosmogenic 10Be surface exposure dating of granitic boulders sampled on the Salcantay moraines is underway and has provided the first numerical ages for these deposits. Initial results indicate ages of 8.1 ± 0.1 10Be ka for the outer moraine and 200 ± 20 10Be years for the sharp-crested inner moraine. These ages are derived using the CRONUS-Earth 10Be exposure age calculator (version 2.0) and expressed with respect to the Lal- Stone production rate scaling scheme using the standard atmosphere. The outer and inner moraine ages correspond to glacial events during the early and latest Holocene, respectively. Further 10Be dating of the mapped moraines and similar deposits observed in adjacent drainages on Nevado Salcantay is anticipated to yield a high-resolution chronology of valley glaciation in this segment of the southern Peruvian Andes. The new results bridge an important gap between existing Andean glacier records to the north and south, and complement available ice core and lacustrine paleoclimate records in the vicinity, thereby expanding spatial and temporal coverage for identifying patterns of Holocene climate change in the tropical Andes. Notably, the inner moraine age correlates with the timing of the Little Ice Age as defined in northern mid- and high latitude glacier records, and suggests considerable expansion of valley glaciers in the southern Peruvian Andes during this climatic minimum. Apart from their paleoclimatic significance, the initial results also demonstrate

  15. New Hydrological Age-Dating Techniques Using Cosmogenic Radionuclides Beryllium-7 and Sodium-22

    Energy Technology Data Exchange (ETDEWEB)

    Frey, S.; Kuells, C. [Institute of Hydrology, Albert-Ludwigs-University of Freiburg (Germany); Schlosser, C. [Bundesamt fuer Strahlenschutz, Freiburg (Germany)

    2013-07-15

    Since atmospheric tritium levels have nearly reached the natural background, there is a need for further development of existing or additional methods for the age dating of young water. Non-gaseous age dating tracers are especially needed for hydrological applications in lakes, rivers and springs and for surface-groundwater interaction studies. Cosmogenically produced isotopes of sodium and beryllium ({sup 22}Na, {sup 7}Be, half-lives of 2.602 years and 53.29 days respectively) have been investigated as potential environmental tracers for residence time analysis of surface water. A simple chemical separation scheme for both radionuclides was established and {sup 7}Be was detected in both surface and groundwater samples. The ions were extracted from 500 L water using an ion exchange resin. The water samples were dated to ages of about 165 and 323 days for riverine samples and 475 days for a groundwater sample. Measurement was performed using a lead covered HPGe detector. These ages match ages previously reported using stable isotopes and tritium. (author)

  16. Study of the acceleration of nuclide burnup calculation using GPU with CUDA

    International Nuclear Information System (INIS)

    Okui, S.; Ohoka, Y.; Tatsumi, M.

    2009-01-01

    The computation costs of neutronics calculation code become higher as physics models and methods are complicated. The degree of them in neutronics calculation tends to be limited due to available computing power. In order to open a door to the new world, use of GPU for general purpose computing, called GPGPU, has been studied [1]. GPU has multi-threads computing mechanism enabled with multi-processors which realize mush higher performance than CPUs. NVIDIA recently released the CUDA language for general purpose computation which is a C-like programming language. It is relatively easy to learn compared to the conventional ones used for GPGPU, such as OpenGL or CG. Therefore application of GPU to the numerical calculation became much easier. In this paper, we tried to accelerate nuclide burnup calculation, which is important to predict nuclides time dependence in the core, using GPU with CUDA. We chose the 4.-order Runge-Kutta method to solve the nuclide burnup equation. The nuclide burnup calculation and the 4.-order Runge-Kutta method were suitable to the first step of introduction CUDA into numerical calculation because these consist of simple operations of matrices and vectors of single precision where actual codes were written in the C++ language. Our experimental results showed that nuclide burnup calculations with GPU have possibility of speedup by factor of 100 compared to that with CPU. (authors)

  17. News from the Library: The 8th edition Karlsruhe nuclide chart has been released

    CERN Multimedia

    CERN Library

    2012-01-01

    The 8th edition of the Karlsruhe Nuclide Chart contains new data not found in the 7th edition.   Since 1958, the well-known Karlsruhe Nuclide Chart has provided scientists with structured, valuable information on the half-lives, decay modes and energies of radioactive nuclides. The chart is used in many disciplines in physics (health physics, radiation protection, nuclear and radiochemistry, astrophysics, etc.) but also in the life and earth sciences (biology, medicine, agriculture, geology, etc.). The 8th edition of the Karlsruhe Nuclide Chart contains new data on 737 nuclides not found in the 7th edition. In total, nuclear data on 3847 experimentally observed ground states and isomers are presented. A new web-based version of this chart is in the final stages of development for use within the Nucleonica Nuclear Science Portal - a portal for which CERN has an institutional license. The chart is also available in paper format.   If you want to buy a paper version of the chart, ple...

  18. Status of determining transuranic nuclides speciation in aqueous solution with laser spectrometry

    International Nuclear Information System (INIS)

    Wang Bo; Liu Dejun; Yao Jun; Chen Xi; Long Haoqi; Zeng Jishu; Su Xiguang; Fan Xianhua

    2007-01-01

    The knowledge about speciation of transuranic nuclides in aqueous solution is a basis for understanding the chemical and migration behavior of transuranic nuclides in aqueous solution. The speciation of transuranic nuclides with trace concentration is complicated in near neutral aqueous solutions, including change of oxidation state, complexation and colloid generation, etc. The concentrations of transuranium in near neutral aqueous solution usually below the sensitivity range of method such as conventional absorption spectroscopy. The radioactive analysis method has a very low detection limits for radionuclides, however, it wouldn' t allow the direct measurement of the transuranic species. In contrast with these methods, laser spectroscopy is an ideal method with high sensitivity, and non-contact and non-destructive for determining the speciation of transuranic nuclides. This paper summarizes the status and application of LIPAS (Laser-induced Photoacoustic Spectrometry), LIBD (Laser-induced Breakdown Detection) and TRLFS (Time-resolved Laser Fluorescence Spectrometry) to determine the speciation of transuranic nuclides with trace concentration in aqueous solutions. (authors)

  19. Study on sorption capacity of synthetic zeolite for simulated nuclide Cs+

    International Nuclear Information System (INIS)

    Wang Jinming; Yi Facheng

    2006-01-01

    For the sake of understanding the functionary order of simulated nuclide Cs + and Synthetic Zeolite (ZF), the sorption equilibrium time and sorption capacity of simulated nuclide Cs + on ZF are studied with the intermittence method. The difference of temperature, pH value, Cs + concentration and medium on sorption capacity and sorption ratio are investigated. The results show that the sorption complexion of simulated nuclide Cs + on ZF in the same concentration solution are sorption equilibrium quantity in range of 155-190 mg/g in different temperatures and that in range of 165-190 mg/g in different pH values and that in range of 120-210 mg/g in different media; and changing order of equilibrium adsorption ratio is the same to that of sorption equilibrium quantity, but their changing range are wider than that of sorption equilibrium quantity; equilibrium adsorption quantity in range of 180-380 mg/g in different concentration solutions, and changing order of equilibrium adsorption ratio is opposite to that of sorption equilibrium quantity, and more-over, their changing range are wider than that of the sorption equilibrium quantity. Sorption equilibrium time of simulated nuclide Cs + on ZF is about ten to fifteen days. So the changing range of sorption capacity of simulated nuclide Cs + on ZF with conditions effects is smaller and the sorption equilibrium time is also less and ZF preferably absorbs Cs in radiation wastes and thus consumedly reduces the effect of radwaste on the environment. (authors)

  20. Application of on-line HPLC-ICP-MS for the determination of the nuclide abundances of lanthanides produced via spallation reactions in an irradiated tantalum target of a spallation neutron source

    International Nuclear Information System (INIS)

    Kerl, W.; Becker, J.S.; Dietze, H.J.

    1998-01-01

    An analytical procedure has been developed for the determination of spallation nuclides in an irradiated tantalum target using HPLC coupled on-line to ICP-MS after dissolution and separation of the tantalum matrix. Pieces of tantalum were taken from different locations of the irradiated tantalum target which had been used as the target material in a spallation neutron source. Tantalum was dissolved in a HNO 3 /HF mixture and the tantalum matrix was separated by liquid-liquid extraction so that only the spallation nuclides were left in the sample solutions. The major fraction of the spallation nuclides in the tantalum target are lanthanide metals in the μg g -1 concentration range determined in the present study. Additional reaction products are formed by the irradiation of trace impurities in the original tantalum target. The nuclide abundances of the lanthanide metals measured in the tantalum target differ significantly from the natural isotopic composition so that a lot of isobaric interferences of long-lived radionuclides and stable isotopes in the mass spectrum are to be expected. Therefore, all the lanthanide metals had to be separated chemically prior to their mass spectrometric determination. The separation of all rare earth elements was performed by ion chromatography on-line to ICP-MS. The nuclide abundances of each lanthanide were determined using a sensitive double-focusing sector field inductively coupled plasma mass spectrometer. The nuclide abundances of the lanthanides in the irradiated tantalum target calculated theoretically and the experimental results obtained by on-line HPLC-ICP-MS proved to be in good agreement. (orig.)

  1. Monitoring of Radio-nuclides in the Vicinities of Finnish Nuclear Power Plants in 2002-2004

    International Nuclear Information System (INIS)

    Ilus, E.; Klemola, S.; Vartti, V.-P.; Mattila, J.; Ikaeheimonen, T.K.

    2000-03-01

    The monitoring of radioactive substances round Finnish nuclear power plants continued in 2002-2004 in accordance with the regular environmental monitoring programmes. Altogether, some 1000 samples are analysed annually from the terrestrial and aquatic environs of the two power plants. Trace amounts of activation products originating from airborne releases from the local power plants were detected in several air and deposition samples taken from the close vicinities of the power plants. At Loviisa, observations were made in two; at Olkiluoto in three aerosol samples during the reporting period. Except for the naturally occurring beryllium-7, the concentrations of all radionuclides in the air samples were very low; from few microbequerels to few tens of microbequerels per cubic metre. A similar pattern was tenable for the deposition samples as well. The activity concentrations of cobalt-60 of local origin were at their highest 0.3 bequerels per square metre in one sample taken from Loviisa and in one sample taken from Olkiluoto. No traces of local discharge nuclides were detected in foodstuffs, drinking water or garden products. In mushrooms and wild berries picked up in 2004 from the Loviisa area, only Chernobyl-derived caesium isotopes and natural potassium-40 were detected. Local discharge nuclides were more abundant in the aquatic environment, especially in samples of indicator organisms, sinking matter and sediments, which effectively accumulate radioactive substances. Besides tritium originating from local discharges, the most significant artificial radionuclide in the samples taken from the aquatic environs of the power plants was still caesium-137 originating from the Chernobyl accident (potassium-40 is a naturally occurring radionuclide). Elevated tritium concentrations were more frequent in the water samples from Loviisa. In indicator organisms and sinking matter, the observed concentrations of local discharge nuclides were generally somewhat higher and

  2. Metrological aspects of radiochemical methods for determining activity of gamma-emitting nuclides

    International Nuclear Information System (INIS)

    Shcherbakov, B.Y.

    1986-01-01

    The author considers the problem of metrological compatibility of the two stages in the radiochemical method of determining the activity of a gamma-emitting nuclide: chemical isolation of the nuclide and radiometric measurement of its activity. The authors show that preparation of the specimen in liquid form provides for important advantages compared with the traditional application of the solid residue onto a flat substate. The work here is of interest for analytical chemists who are involved with determination of the activity of gamma emitting nuclides such as Ru 103, Rh 106, Sn 113, Cs 134, Cs 137, La 140, Ce 141, Ce 144, Hg 203, Na 24, Mn 54, Fe 59, Co 60, Zn 65, Zr 95, and Nb 95, for example, in waste water or in emissions to the atmosphere, with the goal of protecting the environment

  3. Sensitivity and uncertainty analysis for functionals of the time-dependent nuclide density field

    International Nuclear Information System (INIS)

    Williams, M.L.; Weisbin, C.R.

    1978-04-01

    An approach to extend the present ORNL sensitivity program to include functionals of the time-dependent nuclide density field is developed. An adjoint equation for the nuclide field was derived previously by using generalized perturbation theory; the present derivation makes use of a variational principle and results in the same equation. The physical significance of this equation is discussed and compared to that of the time-dependent neutron adjoint equation. Computational requirements for determining sensitivity profiles and uncertainties for functionals of the time-dependent nuclide density vector are developed within the framework of the existing FORSS system; in this way the current capability is significantly extended. The development, testing, and use of an adjoint version of the ORIGEN isotope generation and depletion code are documented. Finally, a sample calculation is given which estimates the uncertainty in the plutonium inventory at shutdown of a PWR due to assumed uncertainties in uranium and plutonium cross sections. 8 figures, 4 tables

  4. Standards of compounds labeled with positron nuclides approved as established techniques for medical use (2001 revision)

    International Nuclear Information System (INIS)

    2001-01-01

    The subcommittee on Medical Application of Cyclotron-Produced Radionuclides, Medical Science and Pharmaceutical Committee, Japan Radioisotope Association, revised the Standards in the title for their manufacturing, quality, manufacturing work environment etc. The facilities must have the individual committee for the organization and its responsibility is for the control and hygiene in manufacturing the nuclides, for the quality control and for the medical use. Based on this, the Standard defined such pharmaceutical items as the general rule; gas agents and injection formulations; test methods involving γ-ray measurement including spectrometry and derived determination, determination with well-type scintillation counter and ionization chamber, method to measure half-time and determination of the nuclide purity; individual definition of [ 18 F]2-deoxy-2-fluoro-D-glucose, 15 O gas and 15 O-carbon monoxide and 15 O-carbon dioxide; and guideline of manufacturing the nuclides and its environment involving monitoring and records. (K.H.)

  5. The protection of radioactive nuclide and nursing management in DSA room

    International Nuclear Information System (INIS)

    Zhang Guimin

    2009-01-01

    Objective: To discuss the protection of radioactive nuclide and nursing management in DSA room. Methods: The clinical state of the protection of radioactive 131 I nuclide and nursing management in DSA room was retrospectively summarized. Results: The standard management for the protection of radioactive nuclide in DSA room was established. The main management schemas included the management of personnel, the management of professional skills and, specialty, the management of radioactive drugs and abandoned odds and ends, preoperative health education, etc. Conclusion: The standard management can ensure that the patients get a good radionuclide therapy in DSA room, and, at the same time, the working environment can be effectively protected and the professional nursing staff can be well trained. (authors)

  6. Systematics of criticality data of special actinide nuclides deduced through the Trombay criticality formula

    International Nuclear Information System (INIS)

    Srinivasan, M.; SubbaRao, K.; Garg, S.B.; Acharya, G.V.

    1989-01-01

    The authors describe a number of interesting systematics and correlations deduced by analyzing the criticality data of special actinide nuclides using concepts embodied in the Trombay critically formula (TCF). The κ ∞ of fast metal actinide nuclides gives a remarkable linear correlation with the fissility parameter Z 2 /A. The neutron leakage probability of all fast metal cores characterized using a constant parameter σ std enables computation of the critical mass value of any unknown fissile nuclide knowing only its Z 2 /A value. Since the neutron leakage probability from dilute fissile solutions is primarily governed by the scattering/slowing down properties of the hydrogen present in water, critical masses and subcritical limits can be predicted for any water-reflected system at any specified hydrogen-to-actinide atomic ratio knowing only the κ ∞ value of the given fissile solution

  7. Methods of Increasing the Performance of Radionuclide Generators Used in Nuclear Medicine: Daughter Nuclide Build-Up Optimisation, Elution-Purification-Concentration Integration, and Effective Control of Radionuclidic Purity

    Directory of Open Access Journals (Sweden)

    Van So Le

    2014-06-01

    Full Text Available Methods of increasing the performance of radionuclide generators used in nuclear medicine radiotherapy and SPECT/PET imaging were developed and detailed for 99Mo/99mTc and 68Ge/68Ga radionuclide generators as the cases. Optimisation methods of the daughter nuclide build-up versus stand-by time and/or specific activity using mean progress functions were developed for increasing the performance of radionuclide generators. As a result of this optimisation, the separation of the daughter nuclide from its parent one should be performed at a defined optimal time to avoid the deterioration in specific activity of the daughter nuclide and wasting stand-by time of the generator, while the daughter nuclide yield is maintained to a reasonably high extent. A new characteristic parameter of the formation-decay kinetics of parent/daughter nuclide system was found and effectively used in the practice of the generator production and utilisation. A method of “early elution schedule” was also developed for increasing the daughter nuclide production yield and specific radioactivity, thus saving the cost of the generator and improving the quality of the daughter radionuclide solution. These newly developed optimisation methods in combination with an integrated elution-purification-concentration system of radionuclide generators recently developed is the most suitable way to operate the generator effectively on the basis of economic use and improvement of purposely suitable quality and specific activity of the produced daughter radionuclides. All these features benefit the economic use of the generator, the improved quality of labelling/scan, and the lowered cost of nuclear medicine procedure. Besides, a new method of quality control protocol set-up for post-delivery test of radionuclidic purity has been developed based on the relationship between gamma ray spectrometric detection limit, required limit of impure radionuclide activity and its measurement

  8. Systematics of criticality properties of actinide nuclides and its bearing on the long lived fission waste problem

    International Nuclear Information System (INIS)

    Srinivasan, M.; Rao, K.S.; Garg, S.B.; Iyengar, P.K.

    1989-01-01

    This paper reports on a systematic analysis of the criticality parameters of over twenty fissile and fertile isotopes of eight transthorium actinide elements that has been carried out by us. It is observed that K ∞ increases and critical mass decreases monotonically with the fissility parameter (Z 2 /A) of the nuclides. This implies that each and every isotope of transuranic elements such as Np, Am, Cm etc. which are produced as by-products during reactor operation is a more valuable nuclear fuel than the corresponding fissile/fissible isotopes of plutonium. This finding has a profound bearing on the long lived fission waste problem and supports the view that the byproduct actinide elements should be separated from the high level waste stream and recycled back into fission reactors, thereby eliminating one of the commonly voiced concerns regarding the acceptability of nuclear fission power

  9. Strong feedbacks between hillslope sediment production and channel incision by saltation-abrasion

    Science.gov (United States)

    Lundbek Egholm, David; Faurschou Knudsen, Mads; Sandiford, Mike

    2013-04-01

    While it is well understood that rivers erode mountain ranges by incising the bedrock and by transporting sediments away from the ranges, the basic physical mechanisms that drive long-term bedrock erosion and control the lifespan of mountain ranges remain uncertain. A particularly challenging paradox is reconciling the dichotomy associated with the high incision rates observed in active mountain belts, and the long-term (108 years) preservation of significant topographic reliefs in inactive orogenic belts (e.g. von Blankenburg, 2005). We have performed three-dimensional computational experiments with a landscape evolution model that couples bedrock landslides and sediment flux-dependent river erosion by saltation-abrasion (Sklar & Dietrich, 2004). The coupled model experiments show strong feedbacks between the channel erosion and the hillslope delivery of sediments. The feedbacks point to hillslope sediment production rate as the main control on channel erosion rates where saltation-abrasion dominates over other fluvial erosion processes. Our models results thus highlight the importance of hillslope sediment production controlled by climate and tectonic activity for scaling erosion rates in fluvial systems. Because of variations in landslide frequency, the feedbacks make tectonic activity a primary driver of fluvial erosion and help clarifying the long-standing paradox associated with the persistence of significant relief in old orogenic belts, up to several hundred-million-years after tectonic activity has effectively ceased. References F. von Blankenburg. The control mechanisms of erosion and weathering at basin scale from cosmogenic nuclides in river sediment. Earth Planet. Sci. Lett. 237, 462-479 (2005). L. S. Sklar, W. E. Dietrich. A mechanistic model for river incision into bedrock by saltating bed load. Water Resour. Res. 40, W06301 (2004).

  10. Aircraft-borne spectrometry - a fast method for nuclide-specific measurement of soil contamination

    International Nuclear Information System (INIS)

    Winkelmann, I.; Schweiger, M.; Thomas, M.; Endrulat, H.J.

    1991-01-01

    An airworthy gamma spectrometer system for fast and large-area, nuclide-specific measurement of the soil contamination is described. The system encompasses an ultrapure germanium detector combined with a computer-controlled multichannel analyser system. The development from the laboratory system to an industrial-scale measuring system is explained. The practical testing is explained and first results are reported, obtained from measuring flights for the nuclide-specific determination of the soil contamination in the free State of Bavaria. (orig.) [de

  11. Apparatus and method for quantitatively evaluating total fissile and total fertile nuclide content in samples

    International Nuclear Information System (INIS)

    Caldwell, J.T.; Cates, M.R.; Franks, L.A.; Kunz, W.E.

    1985-01-01

    Simultaneous photon and neutron interrogation of samples for the quantitative determination of total fissile nuclide and total fertile nuclide material present is made possible by the use of an electron accelerator. Prompt and delayed neutrons produced from resulting induced fissions are counted using a single detection system and allow the resolution of the contributions from each interrogating flux leading in turn to the quantitative determination sought. Detection limits for 239 Pu are estimated to be about 3 mg using prompt fission neutrons and about 6 mg using delayed delayed neutrons

  12. GAUSS VIII: a computer program for the nuclide activity analysis of γ-ray spectra from GE semiconductor spectrometers

    International Nuclear Information System (INIS)

    Putman, M.H.; Helmer, R.G.; McCullagh, C.M.

    1985-12-01

    A description is given of a computer program, GAUSS VII, which has been written to determine nuclide or isotopic activities from γ-ray spectra from GE semiconductor spectrometers. The preliminary portion of the program can determine the energy- and width-calibration equations, locate individual peaks and define ''peak regions'' that are significantly above the local spectral background. The user may edit these lists of peaks and regions. Each peak region is fitted with one or more components in which the peaks are represented by a Gaussian function or a Gaussian with one or two additive exponential tails on the low-energy side and one on the high-energy side. A step-like background function can be used with each component. The program will automatically recycle to add one or more components to a region if needed to improve the fit. The γ-ray energies and intensities are computed from the resulting Gaussian positions and peak areas. From a comparison of these peak energies and the γ-ray energies for various nuclides in a nuclide library, the nuclides that may be present are identified. The user may edit this nuclide list. The program identifies secondary γ rays that should be present for these nuclides and obtains peak areas for them, if the areas are not already available. All of the peak areas are then analyzed to obtain the best nuclidic activities. The peak areas for any one nuclide and those for nuclides that have interfering lines are analyzed in one least-squares ft. Nuclides whose activities are essentially 0, and peaks which cannot be accounted for are removed from the analysis. Besides the nuclidic activities, a peak-by-peak summary is provided. This program is intended to analyze large groups of spectra as well as an individual spectrum

  13. Unravelling the Mysteries of Slip Histories, Validating Cosmogenic 36Cl Derived Slip Rates on Normal Faults

    Science.gov (United States)

    Goodall, H.; Gregory, L. C.; Wedmore, L.; Roberts, G.; Shanks, R. P.; McCaffrey, K. J. W.; Amey, R.; Hooper, A. J.

    2017-12-01

    The cosmogenic isotope chlorine-36 (36Cl) is increasingly used as a tool to investigate normal fault slip rates over the last 10-20 thousand years. These slip histories are being used to address complex questions, including investigating slip clustering and understanding local and large scale fault interaction. Measurements are time consuming and expensive, and as a result there has been little work done validating these 36Cl derived slip histories. This study aims to investigate if the results are repeatable and therefore reliable estimates of how normal faults have been moving in the past. Our approach is to test if slip histories derived from 36Cl are the same when measured at different points along the same fault. As normal fault planes are progressively exhumed from the surface they accumulate 36Cl. Modelling these 36Cl concentrations allows estimation of a slip history. In a previous study, samples were collected from four sites on the Magnola fault in the Italian Apennines. Remodelling of the 36Cl data using a Bayesian approach shows that the sites produced disparate slip histories, which we interpret as being due to variable site geomorphology. In this study, multiple sites have been sampled along the Campo Felice fault in the central Italian Apennines. Initial results show strong agreement between the sites we have processed so far and a previous study. This indicates that if sample sites are selected taking the geomorphology into account, then 36Cl derived slip histories will be highly similar when sampled at any point along the fault. Therefore our study suggests that 36Cl derived slip histories are a consistent record of fault activity in the past.

  14. Precise determination of cosmogenic Ne in CREU-1 quartz standard, using the Helix-MC Plus mass spectrometer

    Science.gov (United States)

    Hamilton, D.; Honda, M.; Zhang, X.; Phillips, D.; Matchan, E.

    2017-12-01

    The Helix-MC Plus multi-collector noble gas mass spectrometer at the Australian National University is uniquely equipped with three high mass resolution collectors on H2, Axial and L2 positions. Their mass resolution and mass resolving power are as high as 1,800 and 8,000, respectively. The Helix-MC Plus can totally separate 20Ne+ from 40Ar++ isobaric interference and also partially separate 21Ne+ from 20NeH+ and 22Ne+ from 12C16O2++. By adjusting collector positions, we are able to measure interference-free Ne isotope intensities and have re-determined the 21Ne abundance in air [1]. Analyses by Honda et al. [1] demonstrated that 20Ne1H contributes approximately 2% to previously determined atmospheric 21Ne values [2], and a new atmospheric 21Ne/20Ne ratio of 0.002906 was calculated. Using the Helix-MC Plus mass spectrometer, we measured Ne abundances in the CREU-1 quartz standard [3] and determined cosmogenic concentrations by subtraction of atmospheric Ne with the new atmospheric 21Ne/20Ne value. The average concentration of cosmogenic 21Ne determined from four repeated analyses is 338 ± 12 × 106 atom/g (2σ). This compares with the average concentration of 348 ± 10 × 106 atom/g (2σ) from 45 analyses determined by several laboratories [3], where Ne isotope analyses were undertaken by conventional low resolution mass spectrometers and atmospheric Ne was subtracted using the conventional atmospheric 21Ne/20Ne [2]. On this basis, for a sample with abundant cosmogenic Ne, like CREU-1 quartz, previously measured by low mass resolution mass spectrometers are likely valid and their geological implications are unaffected. However, for low 21Ne concentration samples, combining new generation of mass spectrometers as well as the new atmospheric ratio may have significance for cosmogenic 21Ne surface exposure dating. References: [1] Honda M., et. al., International Journal of Mass Spectrometry, 387, 1 (2015). [2] Eberhardt P., et. al., Zeitschrift fur Naturforschung, 20

  15. Programme of research into the management and storage of radioactive waste, nuclide migration studies, and mathematical modelling

    International Nuclear Information System (INIS)

    1982-01-01

    The progress of the work is reported under the headings: nuclide migration studies (nuclide-rock interactions; physico-chemical effects; field experiments; groundwater dating); mathematical modelling (calculation of steady groundwater flow using NAMMU; comparison of thermally and naturally driven flows near a radioactive waste repository; diffusion of radionuclides into a rock matrix; radionuclide migration). (U.K.)

  16. Nuclide separation modeling through reverse osmosis membranes in radioactive liquid waste

    Directory of Open Access Journals (Sweden)

    Byung-Sik Lee

    2015-12-01

    Full Text Available The aim of this work is to investigate the transport mechanism of radioactive nuclides through the reverse osmosis (RO membrane and to estimate its effectiveness for nuclide separation from radioactive liquid waste. An analytical model is developed to simulate the RO separation, and a series of experiments are set up to confirm its estimated separation behavior. The model is based on the extended Nernst–Plank equation, which handles the convective flux, diffusive flux, and electromigration flux under electroneutrality and zero electric current conditions. The distribution coefficient which arises due to ion interactions with the membrane material and the electric potential jump at the membrane interface are included as boundary conditions in solving the equation. A high Peclet approximation is adopted to simplify the calculation, but the effect of concentration polarization is included for a more accurate prediction of separation. Cobalt and cesium are specifically selected for the experiments in order to check the separation mechanism from liquid waste composed of various radioactive nuclides and nonradioactive substances, and the results are compared with the estimated cobalt and cesium rejections of the RO membrane using the model. Experimental and calculated results are shown to be in excellent agreement. The proposed model will be very useful for the prediction of separation behavior of various radioactive nuclides by the RO membrane.

  17. Nuclide separation modeling through reverse osmosis membranes in radioactive liquid waste

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung Sik [KEPCO Engineering and Construction, Gimcheon (Korea, Republic of)

    2015-12-15

    The aim of this work is to investigate the transport mechanism of radioactive nuclides through the reverse osmosis (RO) membrane and to estimate its effectiveness for nuclide separation from radioactive liquid waste. An analytical model is developed to simulate the RO separation, and a series of experiments are set up to confirm its estimated separation behavior. The model is based on the extended Nernst-Plank equation, which handles the convective flux, diffusive flux, and electromigration flux under electroneutrality and zero electric current conditions. The distribution coefficient which arises due to ion interactions with the membrane material and the electric potential jump at the membrane interface are included as boundary conditions in solving the equation. A high Peclet approximation is adopted to simplify the calculation, but the effect of concentration polarization is included for a more accurate prediction of separation. Cobalt and cesium are specifically selected for the experiments in order to check the separation mechanism from liquid waste composed of various radioactive nuclides and nonradioactive substances, and the results are compared with the estimated cobalt and cesium rejections of the RO membrane using the model. Experimental and calculated results are shown to be in excellent agreement. The proposed model will be very useful for the prediction of separation behavior of various radioactive nuclides by the RO membrane.

  18. Modeling study on nuclide transport in ocean - an ocean compartment method

    International Nuclear Information System (INIS)

    Lee, Youn Myoung; Suh, Kyung Suk; Han, Kyoung Won

    1991-01-01

    An ocean compartment model simulating transport of nuclides by advection due to ocean circulation and interaction with suspended sediments is developed, by which concentration breakthrough curves of nuclides can be calculated as a function of time. Dividing ocean into arbitrary number of characteristic compartments and performing a balance of mass of nuclides in each ocean compartment, the governing equation for the concentration in the ocean is obtained and a solution by the numerical integration is obtained. The integration method is specially useful for general stiff systems. For transfer coefficients describing advective transport between adjacent compartments by ocean circulation, the ocean turnover time is calculated by a two-dimensional numerical ocean method. To exemplify the compartment model, a reference case calculation for breakthrough curves of three nuclides in low-level radioactive wastes, Tc-99, Cs-137, and Pu-238 released from hypothetical repository under the seabed is carried out with five ocean compartments. Sensitivity analysis studies for some parameters to the concentration breakthrough curves are also made, which indicates that parameters such as ocean turnover time and ocean water volume of compartments have an important effect on the breakthrough curves. (Author)

  19. Mutagenic effects induced by accumulating rare earths nuclides with different ionic radius in fission fragments

    International Nuclear Information System (INIS)

    Zhu Shoupeng; Wang Liuyi; Cao Genfa; Sun Baofu

    1991-05-01

    The purpose of the present study was to ascertain the correlation between the different ionic radius of rare earths nuclides such as 170 Tm, 152 Eu, 147 Pm and its accumulation peculiarity as well as induction of mutagenic effect on bone marrow cells. The study showed that the accumulation peculiarity of rare earths nuclides will vary with the ionic radius. The results indicated that large ionic radius of 147 Pm was selectively localized in liver in early stage, while small ionic radius of 170 Tm and 152 Eu were deposited in bone predominantly. There was a positive relationship between the incidence of chromosome aberration rates and the absorption dose in skeleton by 170 Tm, 152 Eu, or 147 Pm. Studies indicated that the chromosome aberration rates were elevated when the absorption dose in skeleton was increased. Among the type of chromosome aberrations induced by rare earths nuclides with different ionic radius, chromatid breakage was predominant, accompanied with a few chromosome breakage and translocation. At the same time mitosis index of metaphase cells was depressed. Internal contamination of 170 Tm, 152 Eu, or 147 Pm can be induced by some aberrations in one cell. This phenomenon might be due in part to nonuniform irradiation of bone marrow cell with local deposition of these rare earths nuclides with different ionic radius

  20. The role of marine zooplankton in the vertical oceanic transport of alpha-emitting nuclides

    International Nuclear Information System (INIS)

    Cherry, R.D.; Heyraud, M.; Higgo, J.J.W.; Fowler, S.W.; LaRosa, J.

    1976-01-01

    This project aims at studying, in quantitative detail, the role played by marine plankton in the vertical oceanic transport of alpha-emitting nuclides. The common Mediterranean euphausiid, Meganyotiphanes norvegica, for which the necessary quantitative biological data are available as a result of previous work in the Monaco Laboratory, has been selected as the typical macrozooplanktonic species which is the focus of this work

  1. Impact of burnable absorber Gd on nuclide composition for VVER-440 fuel (Gd-2)

    International Nuclear Information System (INIS)

    Zajac, R.; Chrapciak, V.

    2010-01-01

    The latest version of Russian fuel VVER-440 includes burnable absorber in 6 pins. In this article is impact of burnable absorber on nuclide composition and criticality analyzed. In part 1 was analyzed whole burnup interval 0-50 MWd/kgU. In present part 2 are detailed analysis only for first cycle (burnup 0-10 MWd/kgU). (Authors)

  2. Mass measurement of halo nuclides and beam cooling with the mass spectrometer Mistral

    International Nuclear Information System (INIS)

    Bachelet, C.

    2004-12-01

    Halo nuclides are a spectacular drip-line phenomenon and their description pushes nuclear theories to their limits. The most critical input parameter is the nuclear binding energy; a quantity that requires excellent measurement precision, since the two-neutron separation energy is small at the drip-line by definition. Moreover halo nuclides are typically very short-lived. Thus, a high accuracy instrument using a quick method of measurement is necessary. MISTRAL is such an instrument; it is a radiofrequency transmission mass spectrometer located at ISOLDE/CERN. In July 2003 we measured the mass of the Li 11 , a two-neutron halo nuclide. Our measurement improves the precision by a factor 6, with an error of 5 keV. Moreover the measurement gives a two-neutron separation energy 20% higher than the previous value. This measurement has an impact on the radius of the nucleus, and on the state of the two valence neutrons. At the same time, a measurement of the Be 11 was performed with an uncertainty of 4 keV, in excellent agreement with previous measurements. In order to measure the mass of the two-neutron halo nuclide Be 14 , an ion beam cooling system is presently under development which will increase the sensitivity of the spectrometer. The second part of this work presents the development of this beam cooler using a gas-filled Paul trap. (author)

  3. Stable evaluation methods of neutron-physical characteristics of nuclides on the basis of experimental data

    International Nuclear Information System (INIS)

    Volkov, N.G.; Kryanev, A.V.

    1984-01-01

    Technique for obtaining estimations of neutron-physical characteristics of nuclides on the basis of stable estimation methods is set forth. The technique presupposes correction of incorrectly determined errors of measurements and disclosure of systematic errors with their succeeding accountancy. A system of orthogonal polynomials is used as approximating functional dependence. The technique is also generalized at the presence of correlation between measurements

  4. Nuclear power technology system with molten salt reactor for transuranium nuclides burning in closed fuel cycle

    International Nuclear Information System (INIS)

    Alekseev, P.N.; Dudnikov, A.A.; Ignatiev, V.V.; Prusakov, V.N.; Ponomarev-Stepnoy, N.N.; Subbotin, S.A.

    2000-01-01

    A concept of nuclear power technology system with homogeneous molten salt reactors for burning and transmutation of long-lived radioactive toxic nuclides is considered in the paper. Disposition of such reactors in enterprises of fuel cycle allows to provide them with power and facilitate solution of problems with rad waste with minimal losses. (Authors)

  5. A method of alpha-radiating nuclide activity measuring in aerosol filters

    International Nuclear Information System (INIS)

    Ignatov, V.P.; Galkina, V.N.

    1992-01-01

    Scintillation method of determination of alpha-radiating nuclide activity in aerosol filters was suggested. The method involves dissolution of the filter in organic solvent, introduction of luminophore into solution prepared, drying of the preparation and measurement of radionuclide activity. Dependences of alpha-radiation detection efficiency on the content of luminophore, filter material, colourless and coloured substances in preparations analyzed were considered

  6. Selection of exception limits for all actinide nuclides based on revised criteria for safe international transport

    International Nuclear Information System (INIS)

    Lavarenne, C.; Rouyer, V.; Sert, G.; Mennerdahl, D.; Dean, C.; Barton, N.; Jean, F.

    2003-01-01

    Since 1998, there have been some speculations about future transport of significant quantities and concentrations of other actinide nuclides than the four currently listed in the regulation for the safe transport of the radioactive material. Therefore, it raised a need to specify exception limits for such actinides. Additionally, the total fissile nuclide mass per consignment of excepted packages was limited in the 1996 edition of the regulations (a conveyance limit is preliminary supported in the 2003 revision). The proposed changes of the rules have to take this new control into account. The European Community (DGTREN) decided to fund a project related to this subject. In order to define credible exception limits, it was necessary to have reasonably accurate data for all actinide nuclides. Then the authors of the study decided to perform calculations with different codes (MONK, MCNP, CRISTAL, SCALE) and different cross-section libraries (JEF2.2, ENDFB, JENDL, etc.). This article presents the work achieved and gives propositions of modification for the IAEA requirements for the Safe Transport of Radioactive Material related to, firstly, the list of the fissile materials, and secondly, the rule to determine the quantities of actinide nuclides that can be excepted from the requirements for the packages containing fissile materials. The participants acknowledge the DGTREN who made this work possible due to its support. (author)

  7. Method of estimating the sensitivity of a calculated nuclide vector to deviations in initial data

    International Nuclear Information System (INIS)

    Ivanov, E.A.

    1998-12-01

    The application of perturbation theory algorithms in modelling of nuclides transmutation is considered. The perturbation theory is used to construct the analytical technique of sensitivity analysis. It is shown that such algorithms have to be used in modelling of lifetime performance of nuclear power installations with the Monte Carlo method. The present approach differs from others by consistent use of analytical methods. (author)

  8. An Evaluation Method for Activation Analysis using Pre-evaluated Contribution of Nuclides with Impurity

    Energy Technology Data Exchange (ETDEWEB)

    Woo, Myeong Hyeon; Kim, Song Hyun; Kim, Do Hyun; Shin, Chang Ho [Hanyang University, Seoul (Korea, Republic of); Kim, Gee Suck [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    Nuclides in radiation facilities become unstable from nuclear reaction. It emits residual radiation to be stable. Some unstable nuclides remain after operation in the material. It continuously emits the radiation, which has a harmful effect to worker when they try maintenance and plant decommissioning. It is known that residual radiation from impurity occupies a large portion of the radiation dose. If impurity concentration is higher than expectation, the effects of residual radiation could be underestimated. Therefore, estimation of residual radiation is repeatedly calculated according to impurity concentration. In this study, an approach estimating the activation was proposed using pre-evaluated nuclide's contribution to reduce the calculation time and effort of worker. In this study, in order to reduce the calculation time and effort of worker, activation analysis method based on pre-evaluated nuclide contribution was proposed. This method was verified using concreate activation problem, which is located in nuclear power plant. The results show that our proposed method has good agreement with Bateman equation.

  9. Specific gamma-ray dose constants for nuclides important to dosimetry and radiological assessment

    International Nuclear Information System (INIS)

    Unger, L.M.; Trubey, D.K.

    1982-05-01

    Tables of specific gamma-ray dose constants (the unshielded gamma-ray dose equivalent rate at 1 m from a point source) have been computed for approximately 500 nuclides important to dosimetry and radiological assessment. The half life, the mean attenuation coefficient, and thickness for a lead shield providing 95% dose equivalent attenuation are also listed

  10. A new estimation method for nuclide number densities in equilibrium cycle

    International Nuclear Information System (INIS)

    Seino, Takeshi; Sekimoto, Hiroshi; Ando, Yoshihira.

    1997-01-01

    A new method is proposed for estimating nuclide number densities of LWR equilibrium cycle by multi-recycling calculation. Conventionally, it is necessary to spend a large computation time for attaining the ultimate equilibrium state. Hence, the cycle in nearly constant fuel composition has been considered as an equilibrium state which can be achieved by a few of recycling calculations on a simulated cycle operation under a specific fuel core design. The present method uses steady state fuel nuclide number densities as the initial guess for multi-recycling burnup calculation obtained by a continuously fuel supplied core model. The number densities are modified to be the initial number densities for nuclides of a batch supplied fuel. It was found that the calculated number densities could attain to more precise equilibrium state than that of a conventional multi-recycling calculation with a small number of recyclings. In particular, the present method could give the ultimate equilibrium number densities of the nuclides with the higher mass number than 245 Cm and 244 Pu which were not able to attain to the ultimate equilibrium state within a reasonable number of iterations using a conventional method. (author)

  11. Nuclides from Chinese nuclear weapons tests in German kale

    International Nuclear Information System (INIS)

    Schelenz, R.; Fischer, E.

    1979-01-01

    Fission products (Be-7, Ce-141, Ce-137, J-131, Nd-147, Ru-103, Zr-95) of two atmospheric nuclear explosions in the People's Republic of China (September 17, 1977 and March 15, 1978) were detected in kale in the Federal Republic of Germany 12 days after the detonations. The slight increase of radioactivity was negligible with respect to the radiation exposure of man even if large amounts of vegetables were consumed. (orig.) [de

  12. Nuclides from Chinese nuclear weapons in German kale

    International Nuclear Information System (INIS)

    Schelenz, R.; Fischer, E.

    1979-01-01

    Fission products (Be-7, Ce-141, Cs-137, J-131, Nd-147, Ru-103, Zr-95) of two atmospheric nuclear explosions in the People's Republic of China (September 17, 1977 and March 15, 1978) were detected in kale in the Federal Republic of Germany 12 days after the detonations. The slight increase of radio activity was negligible with respect to the radiation exposure of man even if large amounts of vegetables were consumed. (RW) [de

  13. Nuclides from Chinese nuclear weapons tests in German kale

    International Nuclear Information System (INIS)

    Schelenz, R.; Fischer, E.

    1979-01-01

    Fission products of two atmospheric nuclear explosions in the People's Republic of China (September 17, 1977 and March 15, 1978) were detected in kale in the Federal Republick of Germany 12 days after the detonations. The slight increase of radio activity was negligible with respect to the radiation exposure of man even if large amounts of vegetables were consumed. (orig.) 891 AJ/orig. 892 MB [de

  14. Synthesis and study of neutron-rich nuclides

    International Nuclear Information System (INIS)

    Luo Yixiao

    1995-01-01

    During the past few years our understanding of the decay properties and nuclear structure has been extended in a systematic fashion for the neutron-rich nuclei. This review will first sketch the production and identification of the neutron-rich nuclei throughout the whole mass region, and will then discuss the impressive progress in the studies of the exotic decay properties and nuclear structure of neutron-rich nuclei. Their astrophysical implications will also be outlined

  15. Nuclide migration and the environmental radiochemistry of Florida phosphogypsum

    International Nuclear Information System (INIS)

    Burnett, W.C.; Elzerman, A.W.

    2002-01-01

    Phosphogypsum, a waste by-product derived from the wet process production of phosphoric acid, represents one of the most serious problems facing the phosphate industry today. This by-product gypsum precipitates during the reaction of sulfuric acid with phosphate rock and is stored at a rate of about 40 million tons per year on several stacks in central and northern Florida. The main problem associated with this material concerns the relatively high levels of natural uranium-series radionuclides and other impurities which could impact the environment and which makes its commercial use impossible. We have studied the potential release of radionuclides from phosphogypsum by: (i) analysis of stack fluids, groundwaters, and soils associated with gypsum stacks; and (ii) geochemical modeling via MINTEQA2. Stack fluids were observed to be very high in dissolved uranium and 210 Pb with only moderate concentrations of 226 Ra. Underlying soils tend to be enriched in U and 210 Pb indicating precipitation when acidic stack fluids enter a buffered environment. Modeling results showed significant increases in radionuclide complexes with sulfate and phosphate, resulting in relatively mobile uncharged or negatively charged solution species within the stacks. On the other hand, precipitation of multicomponent solids would be expected with increasing pH below the stack. Our evidence thus suggests that while phosphogypsum stacks do contain significant quantities of dissolved radionuclides, removal mechanisms appear to prevent large scale migration of radionuclides to the underlying aquifer. (author)

  16. Methodological study on exposure date of Tiankeng by AMS measurement of in situ produced cosmogenic {sup 36}Cl

    Energy Technology Data Exchange (ETDEWEB)

    Dong Kejun [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China); Li Shizhuo [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China); CNNC China North Nuclear Fuel Company Ltd., Baotou 014035 (China); He Ming [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China); Sasa, Kimikazu [Tandem Accelerator Complex, University of Tsukuba, Tsukuba, Ibaraki 305-8577 (Japan); Matsushi, Yuki [Disaster Prevention Research Institute, Kyoto University (Japan); Huang Baojian [Institute of Karst Geology, Chinese Academy of Geological Sciences, Guilin 541004 (China); Ruan Xiangdong; Guan Yongjing [College of Physics Science and Technology, Guangxi University, Nanning 530004 (China); Takahashi, Tsutomu [Tandem Accelerator Complex, University of Tsukuba, Tsukuba, Ibaraki 305-8577 (Japan); Sueki, Keisuke [Graduate School of Pure and Applied Sciences, University of Tsukuba (Japan); Li Chaoli; Wu Shaoyong [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China); Wang Xianggao [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China); Institute of Karst Geology, Chinese Academy of Geological Sciences, Guilin 541004 (China); Shen Hongtao [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China); College of Physics and Technology, Guangxi Normal University, Guilin 541004 (China); Nagashima, Yasuo [Tandem Accelerator Complex, University of Tsukuba, Tsukuba, Ibaraki 305-8577 (Japan); Jiang Shan, E-mail: jiangs@ciae.ac.cn [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China)

    2013-01-15

    Tiankeng is a typical Karst relief of the late Quaternary Period. Studies on the exposure ages of Tiankeng are very important in geographical research to elucidate the formation condition, the developing process, and the features of biological species. {sup 36}Cl on the surface layer of the rupture cross-section of Tiankeng is largely produced by cosmogenic high-energy neutron induced reactions {sup 40}Ca(n, {alpha}p) and {sup 39}K(n, {alpha}), and has accumulated since the formation of the Tiankeng. Low-energy neutron reaction {sup 35}Cl(n, {gamma}) contributes a small portion of {sup 36}Cl. In this work, the concentration of the cosmogenic {sup 36}Cl in rock samples taken from Dashiwei Tiankeng, Leye County, Guangxi Zhuang Autonomous Region, China, was measured jointly by Accelerator Mass Spectrometry (AMS) laboratories of CIAE and University of Tsukuba in an effort to estimate the formation time (or exposure age) of the Tiankeng. The results show that the exposure time of Da Shiwei Tiankeng is about 26 {+-} 9.6 ka (without erosion correction). The sampling strategy and procedures, experimental set-up, and preliminary results will be presented in detail.

  17. Technological advances in cosmogenic neutron detectors for measuring soil water content

    Science.gov (United States)

    Zreda, M. G.; Schrön, M.; Köhli, M.

    2017-12-01

    The cosmic-ray neutron probe is used for measuring area-average soil water content at the hectometer scale. Early work showed a simple exponential decrease with distance of the instrument's sensitivity and a footprint 300 m in radius. Recent research suggested a much higher sensitivity to local neutrons and reduced footprint. We show results confirming the high sensitivity to local neutrons, describe two ways to reduce local and increase far-field effects, and propose ways of measuring neutrons at different spatial scales. Measurements with moderated detectors across a 10-m-wide creek and a 2-m-wide water tank show a decrease by 30% and 20%, respectively, of neutron intensity over water compared to that over land nearby. These results mean that the detector is sensitive to meter-scale heterogeneities of water content. This sensitivity can be reduced by rising the detector or by shielding it from local neutrons. The effect of local water distributions on the measured neutron intensity decreases with height. In the water tank experiment it disappeared almost completely at the height of 2 m, leading to the conjecture that the height roughly equal to the horizontal scale of heterogeneity would eliminate the sensitivity. This may or may not be practical. Shielding the detector below by a hydrogenous material removes a substantial fraction of the local neutrons. The shielded detector has a reduced count rate, reduced sensitivity to local neutrons and increased sensitivity to neutrons farther afield, and a larger footprint. Such a detector could be preferable to the current cosmogenic-neutron probe under heterogeneous soil water conditions. The shielding experiments also inspired the development of a local-area neutron detector. It has hydrogenous neutron shields on all sides except the bottom, substantially blocking the neutrons coming from afar, while allowing the neutrons coming directly from below. Its footprint is equal to its physical dimension when the detector is

  18. Active basement uplift as seen with cosmogenic lenses: the Sierra Pie de Palo case (Western Argentina)

    Science.gov (United States)

    Siame, L. L.; Sébrier, M.; Costa, C. H.; Ahumada, E. A.; Bellier, O.

    2013-12-01

    The Andean foreland of western Argentina (28°S-33°S) corresponds to retroarc deformations associated with the ongoing flat subduction of the Nazca plate beneath the South American lithosphere, and associated with high levels of seismic activity and crustal active faulting. To improve earthquake source identification and characterization in the San Juan region, data from seismology, structural geology and quantitative geomorphology can be integrated and combined to provide a seismotectonic model. In this model, the Andean back-arc of western Argentina has to be regarded as an obliquely converging foreland where Plio-Quaternary deformations are partitioned between strike-slip and thrust motions that are localized on the E-verging, thin-skinned Argentine Precordillera, and the W-verging thick-skinned Sierras Pampeanas, respectively. In this domain, the Sierra Pie de Palo is a key structure playing a major role in the partitioning of the Plio-Quaternary deformations. Located in the westernmost Sierras Pampeanas, the Sierra Pie de Palo forms a NNE striking, 80 km-long and 35-40 km-wide, ellipsoid range that reaches elevation as high as 3162 m. This mountain range is an actively growing basement fold associated with a high level of seismic activity (e.g., the November 23, 1977, Caucete, Mw 7.4 earthquake). To evaluate the degree of tectonic activity around the Sierra Pie de Palo, we combined a detailed morphometric analysis of the topography together with in situ-produced cosmogenic 10Be concentrations measured in (1) bedrock outcrops corresponding to the exhumed erosional regional surface, (2) surface boulders abandoned on alluvial fans deformed by active faults, and (3) in fluvial sediments sampled at the outlets of selected watersheds that drains out from the Sierra Pie de Palo. All together, our results allows: (1) assessing quantitative constraints on the rate of tectonic and denudation processes that are responsible for the active growth and erosion of the Sierra

  19. Double-nuclide subtraction scintiscanning of the pancreas

    International Nuclear Information System (INIS)

    Streithoff, E.C.

    1978-01-01

    The paper intends to find out if there is a correlation between clinical pancreas diagnoses and diagnoses by subtraction scintiscanning; furthermore, the findings of scintiscanning are compared with those of radiological and sonographic methods. In order to get a picture of the efficiency of the methods applied, not only their accuracy is determined but also their validity sum and validity product. The best results are achieved here with angiography, ERCP, and sonography. In the case of pancreatic scintiscanning, an optimal result well above the international standard is only obtained for sensitivity. On the basis of these results, the indications for an optimal and useful application of pancreatic scintiscanning are determined. (orig./AJ) [de

  20. Estimate of the intensities of the radioactive nuclides produced at the super-FRS at the future GSI facility

    International Nuclear Information System (INIS)

    Ricciardi, M.V.

    2004-11-01

    The principal goal of the new facility is the construction of a worldwide unique and technically innovative accelerator system that will provide an extensive range of particle beams. Proton and antiproton beams will be available and ion beams of all chemical elements up to uranium will be produced with world-record intensities. The main employ of the high-intensity ion beams is the production of energetic beams of short-lived (radioactive) nuclei, in the following referred to as exotic or Rare Isotope Beams (RIBs). RIBs are produced in nuclear reactions experienced by the primary beams of stable particles. We report on the study of the production of radioactive nuclides and of their propagation through the Super-FRS. The study was performed by means of a nuclear-reaction Monte-Carlo code, ABRABLA, opportunely implemented for the above-described purpose. This work offers an overview of the radioactivity production in the Super-FRS area; the latter is the required starting knowledge for the design of the shielding structure. (orig.)

  1. CINDER, Depletion and Decay Chain Calculation for Fission Products in Thermal Reactors

    International Nuclear Information System (INIS)

    England, T.R.; Gorrell, T.C.; Hightower, J.H.

    2001-01-01

    1 - Description of problem or function: CINDER is a four-group, one- point depletion and fission product program based on the evaluation of a general analytical solution of nuclides coupled in any linear sequence of radioactive decays and neutron absorptions in a specified neutron flux spectrum. The desired depletion and fission product chains and all physical data are specified by the problem originator. The program computes individual nuclide number densities, activities, nine energy-group disintegration rates, and macroscopic and barns/fission poisons at each time-step as well as selected summaries of these data. 2 - Method of solution: Time-dependent variations in nuclide cross sections and neutron fluxes are approximated by a user-specified sequential set of values which are considered constant during the duration of the user-specified associated time-increments. When a nuclide concentration is independent of the concentration of any of its progeny, it is possible to resolve the couplings so as to obtain nuclides fed by a single parent. These chains are referred to as linear. 3 - Restrictions on the complexity of the problem: The program is limited to 500 total nuclides formed in up to 240 chains of 20 or fewer nuclides each. Up to 10 nuclides may act as fission product sources, contributing to power, and as many as 99 time-steps of arbitrary length are permitted. All stable nuclides must have a cross section if zero power time-increments are anticipated

  2. Uranium and thorium nuclides series determined in medicinal plants commonly used in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Silva, P.; Francisconi, L.; Damatto, S. [IPEN/CNEN-SP, Sao Paulo (Brazil)

    2014-07-01

    In recent years the study of medicinal plants has become the focus of ever more extensive research all over the world due to their diversity and potential as source of medicinal products. According to the World Health Organization approximately 80% of world population makes use of medicinal herbs due to their believed therapeutic action. Besides being used as medicine, medicinal plants are also largely used as dietary supplements. The presence of radionuclides in plants constitutes one of the main pathways for their transfer to man. The amount of radioactive nuclides from U and Th series in edible vegetables are relatively well known since they have been the main concern of research conducted worldwide. Medicinal plants, on the other hand, have been neglected in these studies, possibly because the ingestion of radioactive material through their consumption has not been recognized or was considered insignificant. The objective of the present study was to determine the content of natural radionuclides from {sup 238}U and {sup 232}Th series in 25 species of medicinal plants used in Brazil, both as medicine and as dietary supplement. The medicinal plant samples were obtained in specialized pharmacies and drugstores. The raw plant and their extracts, produced as recommended by the National Agency for Sanitary Vigilance, were analyzed by Instrumental Neutron Activation Analyses for the determination of U and Th and by Total Alpha and Beta Counting after Radiochemical Separation for determination of {sup 226}Ra, {sup 228}Ra and {sup 210}Pb. In the raw plants the activity concentrations varied from 0,08 Bq kg{sup -1} to 8,0 Bq kg{sup -1} for thorium, from < LID to 22 Bq kg{sup -1} for uranium, from 1,8 Bq kg{sup -1} to 12 Bq kg{sup -1} for {sup 226}Ra, from 33 Bq kg{sup -1} to 74 Bq kg{sup -1} for {sup 228}Ra and from 10 Bq kg{sup -1} to 120 Bq kg{sup -1} for {sup 210}Pb. In the extracts, the activity concentrations varied from 9 mBq kg{sup -1} to 137 mBq kg{sup -1} for Th

  3. Parameters for several plutonium nuclides and 252Cf of safeguards interest

    International Nuclear Information System (INIS)

    Zucker, M.S.; Holden, N.E.

    1984-01-01

    Sets of the neutron emission multiplicity distribution gleaned from the literature for plutonium nuclides and 252 Cf are considered. A methodology for rendering the different sets comparable is presented and used to convert the sets to a common basis such that the differences can be evaluated objectively and that allows realistic estimate of the uncertainties. This in turn permits development of a canonical consensus set in certain instances. Evaluated data on the average neutron multiplicity, the total half-lives, and the half-lives for spontaneous fission are also given. A careful search of the literature reveals that the data on neutron multiplicity distributions for many nuclides is surprisingly sparse, considering that almost thirty years has elapsed since the original pioneering work, which in some cases, yield the only reported value. 93 references, 26 tables

  4. Vertical oceanic transport of alpha-radioactive nuclides by zooplankton fecal pellets

    International Nuclear Information System (INIS)

    Higgo, J.J.W.; Cherry, R.D.; Heyraud, M.; Fowler, S.W.; Beasley, T.M.

    1980-01-01

    This paper gives the results of research to explain the role played by marine plankton metabolism in the vertical oceanic transport of the alpha-emitting nuclides. The common Mediterranean euphausiid, Meganyctiphanes norvegica, was selected as the typical zooplanktonic species that is the focus of this work. Measurements of 239 240 Pu, 238 U, 232 Th, and 210 Po are reported in whole euphausiids and in euphausiid fecal pellets and molts. The resulting data are inserted into a simple model that describes the flux of an element through a zooplanktonic animal. Concentrations of the nuclides concerned are high in fecal pellets, at levels which are typical of geological rather than biological material. It is suggested that zooplanktonic fecal pellets play a significant role in the vertical oceanic transport of plutonium, thorium, and polonium

  5. Librarian driven analysis with graphic user interface for nuclides quantification by gamma spectra

    Energy Technology Data Exchange (ETDEWEB)

    Kondrashov, V.S. E-mail: vlkondra@cdrewu.edu; Rothenberg, S.J.; Petersone, I

    2001-09-11

    For a set of a priori given radionuclides extracted from a general nuclide data library, the authors use median estimates of the gamma-peak areas and estimates to produce a list of possible radionuclides matching gamma-ray line(s). An a priori determined list of nuclides is obtained by searching for a match with the energy information of the database. This procedure is performed in an interactive graphic mode by markers that superimpose, on the spectral data, the energy information and yields provided by a general gamma-ray data library. This library of experimental data includes approximately 17,000 gamma-energy lines related to 756 known gamma emitter radionuclides listed by ICRP.

  6. Development of detection method for individual environmental particles containing alpha radioactive nuclides

    International Nuclear Information System (INIS)

    Esaka, Konomi; Yasuda, Kenichiro; Esaka, Fumitaka; Magara, Masaaki; Sakurai, Satoshi; Usuda, Shigekazu; Nakayama, Shinichi

    2006-01-01

    Artificial radioactive nuclides have been emitted from various sources and have fallen on the surface of the earth as fine particles. Although the characterization of the individual fallout particles is very important, their analysis is difficult. The purpose of this study is to develop a new detection method for individual objective particles containing radioactive nuclides in the environment. The soil or sediment sample was confined in a plastic film and the locations of objective particles were identified with alpha tracks created in a solid-state detectors (BARYOTRAK, Fukuvi Chemical, Ltd) stuck to the both sides of the plastic film. A piece of the film containing the objective particle was cut with a nitrogen laser for following individual particle analysis. This procedure allowed us to detect the objective particle from innumerable number of particles in the environment and characterize the individual particles. (author)

  7. A rational approximation to Reich-Moore collision matrix of non-fissile nuclides

    International Nuclear Information System (INIS)

    Devan, K.; Keshavamurthy, R.S.

    1999-01-01

    The cross sections of many important nuclides are represented in Reich-Moore (RM) formalism in the recent American Evaluated Nuclear Data file, ENDF/B-VI. Processing of cross sections with RM resonance parameters is much more difficult than the other multilevel formalisms such as MLBW and Adler-Adler. In this paper, we derive a rational approximation to the RM collision matrix in the vicinity of a resonance. This simplifies the cross section processing. The energy range of the validity of this approximation in the vicinity of a resonance is also derived. Choosing Ni 58 as an example, results of our approximation for a non-fissile nuclide are given for two typical s-wave resonances. Our rational approximation method is found to work with good accuracies in the vicinity of resonances

  8. High Accuracy mass Measurement of the very Short-Lived Halo Nuclide $^{11}$Li

    CERN Multimedia

    Le scornet, G

    2002-01-01

    The archetypal halo nuclide $^{11}$Li has now attracted a wealth of experimental and theoretical attention. The most outstanding property of this nuclide, its extended radius that makes it as big as $^{48}$Ca, is highly dependent on the binding energy of the two neutrons forming the halo. New generation experiments using radioactive beams with elastic proton scattering, knock-out and transfer reactions, together with $\\textit{ab initio}$ calculations require the tightening of the constraint on the binding energy. Good metrology also requires confirmation of the sole existing precision result to guard against a possible systematic deviation (or mistake). We propose a high accuracy mass determintation of $^{11}$Li, a particularly challenging task due to its very short half-life of 8.6 ms, but one perfectly suiting the MISTRAL spectrometer, now commissioned at ISOLDE. We request 15 shifts of beam time.

  9. An Ilustrative Nuclide Release Behavior from an HLW Repository due to an Earthquake Event

    International Nuclear Information System (INIS)

    Lee, Youn-Myoung; Hwang, Yong-Soo; Choi, Jong-Won

    2008-01-01

    Program for the evaluation of a high-level waste repository which is conceptually modeled. During the last few years, programs developed with the aid of AMBER and GoldSim by which nuclide transports in the near- and far-field of a repository as well as transport through the biosphere under various normal and disruptive release scenarios could be modeled and evaluated, have been continuously demonstrated. To show its usability, as similarly done for the natural groundwater flow scheme, influence of a possible disruptive event on a nuclide release behavior from an HLW repository system caused naturally due to an earthquake has been investigated and illustrated with the newly developed GoldSim program

  10. Light nuclides observed in the fission and fragmentation of 238U

    International Nuclear Information System (INIS)

    Ricciardi, M.V.; Schmidt, K.H.; Benlliure, J.

    2001-05-01

    Light nuclides produced in collisions of 1 A.GeV 238 U with protons and titanium have been fully identified with a high-resolution forward magnetic spectrometer, the fragment separator (FRS), at GSI, and for each nuclide an extremely precise determination of the velocity has been performed. The so-obtained information on the velocity shows that the very asymmetric fission of uranium, in the 238 U + p reaction, produces neutron-rich isotopes of elements down to around charge 10. New important features of the fragmentation of 238 U, concerning the velocity and the N/Z-ratio of these light fragments, and a peculiar even-odd structure in N=Z nuclei, have also been observed. (orig.)

  11. Analysis of nuclide transport under natural convection and time dependent boundary condition using TOUGH2

    Energy Technology Data Exchange (ETDEWEB)

    Javeri, V. [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Koeln (Germany)

    1995-03-01

    After implementation of TOUGH2 at GRS in summer 91, it was first used to analyse the gas transport in a repository for the nuclear waste with negligible heat generation and to verify the results obtained with ECLIPSE/JAV 92/. Since the original version of TOUGH2 does not directly simulate the decay of radionuclide and the time dependent boundary conditions, it is not a appropriate tool to study the nuclide transport in a porous medium/PRU 87, PRU 91/. Hence, in this paper some modifications are proposed to study the nuclide transport under combined influence of natural convection diffusion, dispersion and time dependent boundary condition. Here, a single phase fluid with two liquid components is considered as in equation of state model for water and brine/PRU 91A/.

  12. Finite medium Green's function solutions to nuclide transport in porous media

    International Nuclear Information System (INIS)

    Oston, S.G.

    1979-01-01

    Current analytical techniques for predicting the transport of nuclides in porous materials center on the Green's function approach - i.e., determining the response characteristics of a geologic pathway to an impulse function input. To data, the analyses all have set the boundary conditions needed to solve the 1-D transport equation as though each pathway were infinite in length. The purpose of this work is to critically examine the effect that this infinite pathway assumption has on Green's function models of nuclide transport in porous media. The work described herein has directly attacked the more difficult problem of obtaining suitable Green's functions for finite pathways whose dimensions, in fact, may not be much greater than the diffusion length. Two different finite media Green's functions describing the nuclide mass flux have been determined, depending on whether the pathway is terminated by a high or a low flow resistance at the outlet end. Pulse shapes and peak amplitudes have been computed for each Green's function over a wide range of geohydrologic parameters. These results have been compared to both infinite and semi-infinite medium solutions. It was found that predicted pulse shapes are quite sensitive to selection of a Green's function model for short pathways only. For long pathways all models tend toward a symmetric Gaussian flux-time history at the outlet. Thus, the results of our previous waste transport studies using the infinite pathway assumption are still generally valid because they always included at least one long pathway. It was also found that finite medium models offer some unique computational advantages for evaluating nuclide transport in a series of connecting pathways

  13. Determination and declaration of critical nuclide inventories in Belgian NPP radwaste streams

    International Nuclear Information System (INIS)

    Lemmens, A.; Centner, B.; Beguin, P.; Mannaerts, K.

    2001-01-01

    The nuclear power plants (NPPs) managed by ELECTRABEL are located at the Doel (4 units) and the Tihange (3 units) sites and have a total capacity of 5700 MW(e). All the units are of the PWR type. Taking into account the need for retrievability and reliability of all requested waste data, the operator ELECTRABEL has subcontracted a complete study to the engineering company TRACTEBEL ENERGY ENGINEERING (TEE) in order to elaborate a computer code for the determination of critical nuclides in the different waste streams. This program should guarantee retrievability and reliability of all information related to the waste packages produced at the NPP. Two computer codes, LLWAA and DECL, have therefore been developed by TEE. The first code (LLWAA: low level waste activity assessment code), enables to predict the global inventories and/or the scaling factors of the critical nuclides in the conditioned and in the non-conditioned waste generated by the operation of a PWR. This code is site-specific as it takes into account the plant design characteristics and operating conditions. A version for BWR plants is under development. The second code 'DECL', deals mainly with the complete database management of each waste package produced in order to guarantee full retrievability. LLWAA and DECL are implemented as an integrated software package called 'DECLARE' at the sites of Doel and Tihange. Furthermore, the LLWAA-code has been extended for the determination of the critical nuclides activities in ashes produced by incineration (LLWAA-Ashes) and for the assessment of the critical nuclides activities deposited on equipment of the nuclear auxiliary systems (LLWAA-Decom). (author)

  14. Radioactive nuclides formed by irradiation of the natural elements with thermal neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Ekberg, Kim

    1959-05-15

    For each natural element up to Bi this report gives: the 2200 m/sec neutron absorption cross section; the nuclides formed by thermal neutron activation; the saturation activity per gram natural element for a certain flux; half life and 'tenth life' of the activity; {beta}-energy and/or type of decay; mean {gamma} energy per disintegration; energy and abundance of {gamma} quanta.

  15. Interactive information system on the nuclear physics properties of nuclides and radioactive decay chains

    International Nuclear Information System (INIS)

    Plyaskin, V.I.; Kosilov, R.A.; Manturov, G.N.

    2001-01-01

    A brief review is given of a computerized information system on the nuclear physics properties of nuclides and radioactive decay chains. The main difference between the system presented here and those already in existence is that these evaluated databases of nuclear physics constants are linked to a set of programs, thus enabling analysis of a wide range of problems regarding various nuclear physics applications. (author)

  16. Importance of individual fission nuclide to incontainment radioactive reading during PWR accidents

    International Nuclear Information System (INIS)

    Li Junfeng; Shi Zhongqi

    2004-01-01

    Containment radiation level is one of the most important base for core damage assessment and protective actions recommendation during accidents. Incontainment radioactive reading calculations is the precondition of using this kind of method. Importance of individual nuclides were compared during normal coolant release, gap release and core melt. Conclusions are deduced that when the spray is off, the radioactive reading in containment is mainly from iodine and noble gas, and the spray is on, the radioactive reading is mainly from noble gas. (authors)

  17. Details of modelling HTR core physics: the use of pseudo nuclide traces

    International Nuclear Information System (INIS)

    Kuijper, J.C.; Oppe, J.; Haas, J.B.M. de; Da Cruz, D.F.

    2003-01-01

    At present most combined neutronic and thermal hydraulic analyses of reactors, and the HTR is no exception, are being performed by codes employing few-group (typically 2-group) neutronics on the basis of parametrized few-group macroscopic (and microscopic) cross sections for homogenized areas, depending on quantities like irradiation (fuel only), 135 Xe concentration, temperature, etc. The irradiation parameter (time-integrated power per unit initial heavy metal mass) is sufficient for keeping track of the evolution of areas containing fuel. However, the use of the same parameter in areas without fuel, e.g. containing burnable poison, requires some special provisions. This can be met by the introduction of pseudo nuclides, with very specific cross sections and reaction chains, in the procedure to generate the parametrized few-group cross sections. It is shown that the time-evolution of a non-fuelled burnable poison area, as calculated by the 2-group (HTR) reactor code PANTHERMIX employing pseudo nuclides, compares well to the time-evolution obtained from an explicit burnup calculation by the WIMS8A/SNAP code. Examples are also shown using the pseudo nuclide method to keep track of the fast fluence (time-integrated flux above 0.1 MeV) in a continuous reload pebble-bed HTR reactor calculation by PANTHERMIX. Although the present implementation of the pseudo nuclide method exhibits some peculiarities connected to the specific codes in use (WIMS8A and PANTHERMIX) it is considered to be sufficiently general to be applicable in other code suites, requiring only limited modifications. (authors)

  18. Details of modelling HTR core physics: the use of pseudo nuclide traces

    Energy Technology Data Exchange (ETDEWEB)

    Kuijper, J.C.; Oppe, J.; Haas, J.B.M. de; Da Cruz, D.F. [Nuclear Research and consultancy Group (NRG), Petten (Netherlands)

    2003-07-01

    At present most combined neutronic and thermal hydraulic analyses of reactors, and the HTR is no exception, are being performed by codes employing few-group (typically 2-group) neutronics on the basis of parametrized few-group macroscopic (and microscopic) cross sections for homogenized areas, depending on quantities like irradiation (fuel only), {sup 135}Xe concentration, temperature, etc. The irradiation parameter (time-integrated power per unit initial heavy metal mass) is sufficient for keeping track of the evolution of areas containing fuel. However, the use of the same parameter in areas without fuel, e.g. containing burnable poison, requires some special provisions. This can be met by the introduction of pseudo nuclides, with very specific cross sections and reaction chains, in the procedure to generate the parametrized few-group cross sections. It is shown that the time-evolution of a non-fuelled burnable poison area, as calculated by the 2-group (HTR) reactor code PANTHERMIX employing pseudo nuclides, compares well to the time-evolution obtained from an explicit burnup calculation by the WIMS8A/SNAP code. Examples are also shown using the pseudo nuclide method to keep track of the fast fluence (time-integrated flux above 0.1 MeV) in a continuous reload pebble-bed HTR reactor calculation by PANTHERMIX. Although the present implementation of the pseudo nuclide method exhibits some peculiarities connected to the specific codes in use (WIMS8A and PANTHERMIX) it is considered to be sufficiently general to be applicable in other code suites, requiring only limited modifications. (authors)

  19. Nuclide analysis at domestic Nuclear Power Plant with CZT Detector during the overhaul

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Seokon; Yoon, Kanghwa; Soo, Moonjin; Lee, Byoungil; Kim, Jeongin [Radiation Health Research Institute, Seoul (Korea, Republic of)

    2013-05-15

    AEP (American Electric Power) also introduced another type CZT detector to perform source term monitoring and they had announced the results through the ISOE (Information System on Occupational Exposure). A CZT semiconductor detector is good to monitor source terms at a NPP in that it is possible to make a portable type because it does not need any cooling system at room temperature and it has good energy resolution. To follow up global atmosphere, KHNP (Korea Hydro and Nuclear Power) has been trying to use CZT monitoring system at a domestic NPP. This study shows a result of the kinds of nuclides between Before H{sub 2}O{sub 2} and After Clean-Up process for primary reactor coolant system nearby a steam generator during the overhaul for the first time. The detected source terms were the same for all measurement conditions, but the measurement was not quantitative analysis. It needs Spectrum Analysis Program to acquire quantitative analysis and we are developing the system. If the system is set-up in the CZT monitoring system, we will be able to know detail information of nuclides more. The result of spectra was the same regardless of measurement conditions and the intensity of the major nuclides is different obviously according to the measurement points. Even though the results only give US the information of the kinds of nuclides without any other information, the meaning is very significant to US, because the measurement is performed for the first time all over country. Especially, the result of both Red Plot and Blue Plot is very interesting in that the primary coolant is (Red plot) inside the pipe whereas it is not (Blue plot) inside the steam generator. Our study will be continued to find the reasons.

  20. Probabilities and energies to obtain the counting efficiency of electron-capture nuclides, KLMN model

    International Nuclear Information System (INIS)

    Casas Galiano, G.; Grau Malonda, A.

    1994-01-01

    An intelligent computer program has been developed to obtain the mathematical formulae to compute the probabilities and reduced energies of the different atomic rearrangement pathways following electron-capture decay. Creation and annihilation operators for Auger and X processes have been introduced. Taking into account the symmetries associated with each process, 262 different pathways were obtained. This model allows us to obtain the influence of the M-electron-capture in the counting efficiency when the atomic number of the nuclide is high

  1. Four shells atomic model to computer the counting efficiency of electron-capture nuclides

    International Nuclear Information System (INIS)

    Grau Malonda, A.; Fernandez Martinez, A.

    1985-01-01

    The present paper develops a four-shells atomic model in order to obtain the efficiency of detection in liquid scintillation courting, Mathematical expressions are given to calculate the probabilities of the 229 different atomic rearrangements so as the corresponding effective energies. This new model will permit the study of the influence of the different parameters upon the counting efficiency for nuclides of high atomic number. (Author) 7 refs

  2. Nuclide analysis at domestic Nuclear Power Plant with CZT Detector during the overhaul

    International Nuclear Information System (INIS)

    Kang, Seokon; Yoon, Kanghwa; Soo, Moonjin; Lee, Byoungil; Kim, Jeongin

    2013-01-01

    AEP (American Electric Power) also introduced another type CZT detector to perform source term monitoring and they had announced the results through the ISOE (Information System on Occupational Exposure). A CZT semiconductor detector is good to monitor source terms at a NPP in that it is possible to make a portable type because it does not need any cooling system at room temperature and it has good energy resolution. To follow up global atmosphere, KHNP (Korea Hydro and Nuclear Power) has been trying to use CZT monitoring system at a domestic NPP. This study shows a result of the kinds of nuclides between Before H 2 O 2 and After Clean-Up process for primary reactor coolant system nearby a steam generator during the overhaul for the first time. The detected source terms were the same for all measurement conditions, but the measurement was not quantitative analysis. It needs Spectrum Analysis Program to acquire quantitative analysis and we are developing the system. If the system is set-up in the CZT monitoring system, we will be able to know detail information of nuclides more. The result of spectra was the same regardless of measurement conditions and the intensity of the major nuclides is different obviously according to the measurement points. Even though the results only give US the information of the kinds of nuclides without any other information, the meaning is very significant to US, because the measurement is performed for the first time all over country. Especially, the result of both Red Plot and Blue Plot is very interesting in that the primary coolant is (Red plot) inside the pipe whereas it is not (Blue plot) inside the steam generator. Our study will be continued to find the reasons

  3. Total and spontaneous fission half-lives of the americium and curium nuclides

    International Nuclear Information System (INIS)

    Holden, N.E.

    1984-01-01

    The total half-life and the half-life for spontaneous fission are evaluated for the various long-lived nuclides of interest. Recommended values are presented for 241 Am, /sup 242m/Am, 243 Am, 242 Cm, 243 Cm, 244 Cm, 245 Cm, 246 Cm, 247 Cm, 248 Cm, and 250 Cm. The uncertainties are provided at the 95% confidence limit for each of the recommended values

  4. Sampling art for ground-water monitoring wells in nuclide migration

    International Nuclear Information System (INIS)

    Liu Wenyuan; Tu Guorong; Dang Haijun; Wang Xuhui; Ke Changfeng

    2010-01-01

    Ground-Water sampling is one of the key parts in field nuclide migration. The objective of ground-water sampling program is to obtain samples that are representative of formation-quality water. In this paper, the ground-water sampling standards and the developments of sampling devices are reviewed. We also designed the sampling study projects which include the sampling methods, sampling parameters and the elementary devise of two types of ground-Water sampling devices. (authors)

  5. Nuclide transport models for HLW repository safety assessment in Finland, Japan, Sweden, and Canada

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Young Myoung; Kang, Chul Hyung; Hwang, Yong Soo; Choi, Jong Won; Kim, Sung Gi; Koh, Won Il

    1997-10-01

    Disposal and design concepts in such countries as Sweden, Finland, Canada and Japan which have already published safety assessment reports for the HLW repositories have been reviewed mainly in view of nuclide transport models used in their assessment. This kind of review would be very helpful in doing similar research in Korea where research program regarding HLW has been just started. (author). 44 refs., 2 tabs., 30 figs

  6. Fabrication of a set of realistic torso phantoms for calibration of transuranic nuclide lung counting facilities

    International Nuclear Information System (INIS)

    Griffith, R.V.; Anderson, A.L.; Sundbeck, C.W.; Alderson, S.W.

    1983-01-01

    A set of 16 tissue equivalent torso phantoms has been fabricated for use by major laboratories involved in counting transuranic nuclides in the lung. These phantoms, which have bone equivalent plastic rib cages, duplicate the performance of the DOE Realistic Phantom set. The new phantoms (and their successors) provide the user laboratories with a highly realistic calibration tool. Moreover, use of these phantoms will allow participating laboratories to intercompare calibration information, both on formal and informal bases. 3 refs., 2 figs

  7. Radioactive nuclides formed by irradiation of the natural elements with thermal neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Ekberg, Kim

    1959-05-15

    For each natural element up to Bi this report gives: the 2200 m/sec neutron absorption cross section; the nuclides formed by thermal neutron activation; the saturation activity per gram natural element for a certain flux; half life and 'tenth life' of the activity; {beta}-energy and/or type of decay; mean {gamma} energy per disintegration; energy and abundance of {gamma} quanta.

  8. A Probabilistic Consideration on Nuclide Releases from a Pyro-processed Waste Repository

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Youn Myoung; Jeong, Jong Tae [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    Very recently, a GoldSim template program, GSTSPA, for a safety assessment of a conceptual hybrid-typed repository system, called 'A-KRS,' in which two kinds of pyroprocessed radioactive wastes, low-level metal wastes and ceramic high-level wastes that arise from the pyroprocessing of PWR nuclear spent fuels, has been developed and is to be disposed of by 'separate disposal' strategies. The A-KRS is considered to be constructed at two different depths in geological media: at a 200m depth, at which a possible human intrusion is considered to be limited after closure, for the pyroprocessed metal wastes with lower or no decay heat producing nuclides, and at a 500m depth, believed to be the reducing condition for nuclides with a rather higher radioactivity and heat generation rate. This program is ready for a probabilistic total system performance assessment (TSPA) which is able to evaluate nuclide release from the repository and farther transport into the geosphere and biosphere under various normal, disruptive natural and manmade events, and scenarios that can occur after a failure of a waste package and canister with associated uncertainty. To quantify the nuclide release and transport through the various possible pathways in the near- and far-fields of the A-KRS repository system under a normal groundwater flow scenario, some illustrative evaluations have been made through this study. Even though all parameter values associated with the A-KRS were assumed for the time being, the illustrative results should be informative since the evaluation of such releases is very important not only in view of the safety assessment of the repository, but also for design feedback of its performance

  9. Influence of Groundwater Flow Rate on Nuclide Releases from Pyro-processed Waste Repository

    International Nuclear Information System (INIS)

    Lee, Youn Myoung; Jeong, Jong Tae

    2011-01-01

    Since the early 2000s several template programs for the safety assessment of a high-level radioactive waste repository as well as a low- and intermediate level radioactive waste repository systems have been developed by utilizing GoldSim and AMBER at KAERI. Very recently, another template program for a conceptual hybrid-typed repository system, called 'A-KRS' in which two kinds of pyroprocessed radioactive wastes, low-level metal wastes and ceramic high-level wastes that arise from pyroprocessing of PWR nuclear spent fuels has been developed and are to be disposed of by separate disposal strategies. The A-KRS is considered to be constructed at two different depths in geological media: 200m depth, at which a possible human intrusion is considered to be limited after closure, for the pyroprocessed metal wastes with lower or no decay heat producing nuclides, and 500m depth, believed to be in the reducing condition for nuclides with a rather higher radioactivity and heat generation rate. This program is ready for total system performance assessment which is able to evaluate nuclide release from the repository and farther transport into the geosphere and biosphere under various normal, disruptive natural and manmade events, and scenarios that can occur after a failure of waste package and canister. To quantify a nuclide release and transport through the possible various pathways especially in the near-fields of the A-KRS repository system, some illustrative evaluations have been made through the study. Even though all parameter values associated with the A-KRS were assumed for the time being, the illustrative results should be informative since the evaluation of such releases is very important not only in view of the safety assessment of the repository, but also for design feedback of its performance

  10. A Probabilistic Consideration on Nuclide Releases from a Pyro-processed Waste Repository

    International Nuclear Information System (INIS)

    Lee, Youn Myoung; Jeong, Jong Tae

    2012-01-01

    Very recently, a GoldSim template program, GSTSPA, for a safety assessment of a conceptual hybrid-typed repository system, called 'A-KRS,' in which two kinds of pyroprocessed radioactive wastes, low-level metal wastes and ceramic high-level wastes that arise from the pyroprocessing of PWR nuclear spent fuels, has been developed and is to be disposed of by 'separate disposal' strategies. The A-KRS is considered to be constructed at two different depths in geological media: at a 200m depth, at which a possible human intrusion is considered to be limited after closure, for the pyroprocessed metal wastes with lower or no decay heat producing nuclides, and at a 500m depth, believed to be the reducing condition for nuclides with a rather higher radioactivity and heat generation rate. This program is ready for a probabilistic total system performance assessment (TSPA) which is able to evaluate nuclide release from the repository and farther transport into the geosphere and biosphere under various normal, disruptive natural and manmade events, and scenarios that can occur after a failure of a waste package and canister with associated uncertainty. To quantify the nuclide release and transport through the various possible pathways in the near- and far-fields of the A-KRS repository system under a normal groundwater flow scenario, some illustrative evaluations have been made through this study. Even though all parameter values associated with the A-KRS were assumed for the time being, the illustrative results should be informative since the evaluation of such releases is very important not only in view of the safety assessment of the repository, but also for design feedback of its performance

  11. Modeling the nuclide migration and dose estimating using GoldSim

    International Nuclear Information System (INIS)

    Xiong Xiaowei

    2010-01-01

    Nuclide migration of the high-level waste (HLW) repository in the near-and far-field as well as a transport through a biosphere under reference scenario has been modeled by utilizing GoldSim. The concept design of engineered barrier system (EBS), geosphere and biosphere characteristics are derived from H12 in Japan. The calculated results are consistent with H12 report, which can be considered as technical basis for the safety assessment of China HLW disposal. (authors)

  12. Effect of local burn-up variation on computed mean nuclide concentrations

    International Nuclear Information System (INIS)

    Moeller, W.

    1982-01-01

    Mean concentrations of U-235, U-236, U-238, Pu-239, Pu-240, Pu-241 and Pu-242 in some volume areas of WWER-440 fuel assemblies have been calculated from corresponding burn-up microdistribution data and compared with those calculated from burn-up mean values. Differences occurring were below 3% for the uranium nuclides but, at low burn-ups, considerable for Pu-241 and Pu-242. (author)

  13. Synchrotron radiation based Mössbauer absorption spectroscopy of various nuclides

    Energy Technology Data Exchange (ETDEWEB)

    Masuda, Ryo, E-mail: masudar@rri.kyoto-u.ac.jp; Kobayashi, Yasuhiro; Kitao, Shinji; Kurokuzu, Masayuki; Saito, Makina [Kyoto University, Research Reactor Institute (Japan); Yoda, Yoshitaka [Japan Synchrotron Radiation Research Institute, Resarch and Utilization Division (Japan); Mitsui, Takaya [Japan Atomic Energy Agency, Condensed Matter Science Division, Sector of Nuclear Science Research (Japan); Seto, Makoto [Kyoto University, Research Reactor Institute (Japan)

    2016-12-15

    Synchrotron-radiation (SR) based Mössbauer absorption spectroscopy of various nuclides is reviewed. The details of the measuring system and analysis method are described. Especially, the following two advantages of the current system are described: the detection of internal conversion electrons and the close distance between the energy standard scatterer and the detector. Both of these advantages yield the enhancement of the counting rate and reduction of the measuring time. Furthermore, SR-based Mössbauer absorption spectroscopy of {sup 40}K, {sup 151}Eu, and {sup 174}Yb is introduced to show the wide applicability of this method. In addition to these three nuclides, SR-based Mössbauer absorption spectroscopy of {sup 61}Ni, {sup 73}Ge, {sup 119}Sn, {sup 125}Te, {sup 127}I, {sup 149}Sm, and {sup 189}Os has been performed. We continue to develop the method to increase available nuclides and to increase its ease of use. The complementary relation between the time-domain method using SR, such as nuclear forward scattering and the energy-domain methods such as SR-based Mössbauer absorption spectroscopy is also noted.

  14. Lake-0: A model for the simulation of nuclides transfer in lake scenarios

    International Nuclear Information System (INIS)

    Garcia-Olivares, A.; Aguero, A.; Pinedo, P.

    1994-01-01

    This report presents documentation and a user's manual for the program LAKE-0, a mathematical model of nuclides transfer in lake scenarios. Mathematical equations and physical principles used to develop the code are presented in section 2. The program use is presented in section 3 including input data sets and output data. Section 4 presents two example problems, and some results. The complete program listing including comments is presented in Appendix A. Nuclides are assumed to enter the lake via atmospheric deposition and carried by the water runoff and the dragged sediments from the adjacent catchment. The dynamics of the nuclides inside the lake is based in the model proposed by Codell (11) as modified in (5). The removal of concentration from the lake water is due to outflow from the lake and to the transfer of activity to the bottom sediments. The model has been applied to the Esthwaite Water (54 degree 21 minute N, 03 degree 00 minute W at 65 m. asl.) in the frame of the VAMP Aquatic Working Group (8) and to Devoke Water (54 degree 21 minute 5'N, 03 degree, 18 minute W at 230 m. asl.)

  15. LAKE-0: a model for the simulation of nuclides transfer in lake scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Olivares, A.; Aguero, A.; Pinedo, P.

    1994-07-01

    This report presents documentation and a user's manual for the program LAKE-0, a mathematical model of nuclides transfer in lake scenarios. Mathematical equations and physical principles used to develop the code are presented in section 2. The program use is presented in section 3 including input data sets and output data. Section 4 presents two example problems, and some results. The complete program listing including comments is presented in Appendix A. Nuclides are assumed to center the lake via atmospheric deposition and carried by the water runoff and the dragged sediments from the adjacent catchment. The dynamics of the nuclides inside the lake is based in the model proposed by Codell (11) as modified in (5). The removal of concentration from the lake water is due to out flow from the lake and to the transfer of activity to the button sediments. The model has been applied to the Esthwaite Water (54 degree celsius 2 l'N, 03 degree celsius 00'W at 65 m. asi.) in the frame of the VAMP Aquatic Working Group (8) and to Devoke Water (5 21.5'N, 03H8'W at 230 m. asi.). (Author). 13 refs.

  16. LAKE-0: a model for the simulation of nuclides transfer in lake scenarios

    International Nuclear Information System (INIS)

    Garcia-Olivares, A.; Aguero, A.; Pinedo, P.

    1994-01-01

    This report presents documentation and a user's manual for the program LAKE-0, a mathematical model of nuclides transfer in lake scenarios. Mathematical equations and physical principles used to develop the code are presented in section 2. The program use is presented in section 3 including input data sets and output data. Section 4 presents two example problems, and some results. The complete program listing including comments is presented in Appendix A. Nuclides are assumed to center the lake via atmospheric deposition and carried by the water runoff and the dragged sediments from the adjacent catchment. The dynamics of the nuclides inside the lake is based in the model proposed by Codell (11) as modified in (5). The removal of concentration from the lake water is due to out flow from the lake and to the transfer of activity to the button sediments. The model has been applied to the Esthwaite Water (54 degree celsius 2 l'N, 03 degree celsius 00'W at 65 m. asi.) in the frame of the VAMP Aquatic Working Group (8) and to Devoke Water (5 21.5'N, 03H8'W at 230 m. asi.). (Author). 13 refs

  17. Radio nuclides in mineral rocks and beach sand minerals in south east coast, Odisha

    International Nuclear Information System (INIS)

    Vidya Sagar, D.; Sahoo, S.K.; Essakki, Chinna; Tripathy, S.K.; Ravi, P.M.; Tripathi, R.M.; Mohanty, D.

    2014-01-01

    The primordial and metamorphic mineral rocks of the Eastern Ghats host minerals such as rutile, ilmenite, Silmenite, zircon, garnet and monazite in quartz matrix. The weathered material is transported down to the sea by run-off through Rivers and deposited back in coastal beach as heavy mineral concentrates. The minerals are mined by M/S Indian Rare Earths Ltd at the Chatrapur plant in Odisha coast to separate the individual minerals. Some of these minerals have low level radioactivity and may pose external and internal radiation hazard. The present paper deals with natural Thorium and Uranium in the source rocks with those observed in the coastal deposits. The study correlates the nuclide activity ratios in environmental samples in an attempt to understand the ecology of the natural radio nuclides of 238 U, 232 Th, 40 K and 226 Ra in environmental context. Further work is in progress to understand the geological process associated with the migration and reconcentration of natural radio-nuclides in the natural high background radiation areas

  18. Sensitivity Analysis of Nuclide Importance to One-Group Neutron Cross Sections

    International Nuclear Information System (INIS)

    Sekimoto, Hiroshi; Nemoto, Atsushi; Yoshimura, Yoshikane

    2001-01-01

    The importance of nuclides is useful when investigating nuclide characteristics in a given neutron spectrum. However, it is derived using one-group microscopic cross sections, which may contain large errors or uncertainties. The sensitivity coefficient shows the effect of these errors or uncertainties on the importance.The equations for calculating sensitivity coefficients of importance to one-group nuclear constants are derived using the perturbation method. Numerical values are also evaluated for some important cases for fast and thermal reactor systems.Many characteristics of the sensitivity coefficients are derived from the derived equations and numerical results. The matrix of sensitivity coefficients seems diagonally dominant. However, it is not always satisfied in a detailed structure. The detailed structure of the matrix and the characteristics of coefficients are given.By using the obtained sensitivity coefficients, some demonstration calculations have been performed. The effects of error and uncertainty of nuclear data and of the change of one-group cross-section input caused by fuel design changes through the neutron spectrum are investigated. These calculations show that the sensitivity coefficient is useful when evaluating error or uncertainty of nuclide importance caused by the cross-section data error or uncertainty and when checking effectiveness of fuel cell or core design change for improving neutron economy

  19. Research on the reliability of measurement of natural radioactive nuclide concentration of U-238

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Seok Ki; Kim, Gee Hyun [Dept. of Nuclear engineering, Univ. of SeJong, Seoul (Korea, Republic of); Joo, Sun Dong; Lee, Hoon [KoFONS, Seongnam (Korea, Republic of)

    2016-12-15

    Naturally occurred radioactive materials (NORM) can be found all around us and people are exposed to this no matter what they do or where they live. In this study, two indirect measurement methods of NORM U-238 has been reviewed; one that has used HPGe on the basis of the maintenance, and the other is disequilibrium theory of radioactive equilibrium relationships of mother and daughter nuclide at Decay-chain of NORM U-238. For this review, complicated pre-processing process (Breaking->Fusion->Chromatography->Electron deposit) has been used , and then carried out a comparative research with direct measurement method that makes use of and measures Alpha spectrometer. Through the experiment as above, we could infer the daughter nuclide whose radioactive equilibrium has been maintained with U-238. Therefore, we could find out that the daughter nuclide suitable to be applied to Gamma indirect measurement method was Th-234. Due to Pearson Correlation statistics, we could find out the reliability of the result value that has been analyzed by using Th-234.

  20. Applications of short lived nuclides in activation analysis, problems and progress

    Energy Technology Data Exchange (ETDEWEB)

    Grass, F [Atominstitut, Vienna (Austria)

    1976-07-01

    Short lived nuclides or isomeric transitions, respectively would have some advantages over long lived ones. Although we published a paper concerning a germanium-determination in iron meteorites some years ago, only few laboratories use this technique, the main reason being that the high matrix activity disturbs the measurement of energy-spectra. A multichannel analyzer in the time sequence mode enables Li-8 determination by a purely instrumental method which is therefore used more frequently. In the time sequence mode much higher counting rates up to 10 - 50 MHz are processed then by taking energy-spectra. This is the reason why activation analysis with short lived isomeric states is seldom applied when counting rate and pulse height are to be detected simultaneously. Exceptional difficulties are encountered in measurement of samples activated by a reactor pulse. Further difficulties arise from the fact that an optimal expelling time depends on the half life of the nuclide, and is more critical if the half life is short and the full width half maximum of the reactor pulse is small. Commercial Ge-Li-detectors can be used only at low counting rates, so that samples with high matrix activities cannot be measured. Modifying the electronic system enables registration of samples with high matrix activities. For short lived nuclides emitting hard beta-rays, e.g. B-12 or Li-8, a Cerenkov-detector is optimal. These problems are discussed in examples. (author)

  1. Selection of nuclide decay chains for use in the assessment of the radiological impact of geological repositories for radioactive waste

    International Nuclear Information System (INIS)

    Thorne, M.C.

    1982-12-01

    The criteria for selecting nuclide decay chains for use in the assessment of the radiological impact of geological repositories for radioactive waste are given. The reduced chains recommended for use with SYVAC are described. (author)

  2. Nuclide transport of decay chain in the fractured rock medium: a model using continuous time Markov process

    International Nuclear Information System (INIS)

    Younmyoung Lee; Kunjai Lee

    1995-01-01

    A model using continuous time Markov process for nuclide transport of decay chain of arbitrary length in the fractured rock medium has been developed. Considering the fracture in the rock matrix as a finite number of compartments, the transition probability for nuclide from the transition intensity between and out of the compartments is represented utilizing Chapman-Kolmogorov equation, with which the expectation and the variance of nuclide distribution for the fractured rock medium could be obtained. A comparison between continuous time Markov process model and available analytical solutions for the nuclide transport of three decay chains without rock matrix diffusion has been made showing comparatively good agreement. Fittings with experimental breakthrough curves obtained with nonsorbing materials such as NaLS and uranine in the artificial fractured rock are also made. (author)

  3. Therapeutic result of radioactive nuclide 90Sr/90Y treatment in patients with benign prostatic hypertrophy (BPH)

    International Nuclear Information System (INIS)

    Chen Hanchao; Li Yuying

    2008-01-01

    Objective: To study the effect of radioactive nuclide 90 Sr/ 90 Y treatment in patients with benign prostatic hypertrophy (BPH). Methods: Sixty patients with BPH were treated with a course of transurethral radioactive nuclide 90 Sr/ 90 Y therapy. Results: The severity of BPH was assessed with four parameters: maximal flow rate (MFR), volume of residual urine (VRU), international prostatic symptom score (IPSS) and volume (size) of prostate. In this series, the total effective rate was 93.33% with no treatment- related mortality. Favorable changes of the parameters after a course of radioactive nuclide therapy were significant. Conclusion: Radioactive nuclide 90 Sr/ 90 Y therapy for patients with BPH was safe, easily performed and quite effective. This procedure is worth popularizing in appropriate patients. (authors)

  4. In-situ cosmogenic 10Be and 36Cl studies in the earth sciences at the ANTARES AMS facility

    International Nuclear Information System (INIS)

    Fink, D.; Elliott, G.; Child, D.; Misfud, C.

    1998-01-01

    In parallel with a successful 14 C AMS program, routine measurements of 10 Be (T 1/2 = 1.5 Ma), 26 Al (0.7Ma) and 36 Cl (0.3Ma) have been demonstrated at the ANTARES AMS facility. With this capability, ANSTO is coordinating and funding a comprehensive program in the application of in-situ cosmogenic radioisotopes for Southern Hemisphere Quaternary climate change. The sub-projects within the program are based on strong university collaboration in the Earth Sciences and with the Australian Antarctic Division. A fully equipped geochemistry laboratory for chemically processing rock samples for AMS studies has been completed and is fully operational. In addition a variety of analytical techniques such as NAA, ICP-MS, XRF, XRD, etc are available through the Environment Division at ANSTO. A brief description of the research projects in glacial chronology and those related to landscape geomorphology is given

  5. Natural climate variability inferred from cosmogenic isotopes and other geophysical data and its impact on human activity

    International Nuclear Information System (INIS)

    Creer, K.M.

    2001-01-01

    The way how natural climate changes may have influenced anthropological development is discussed. The main characteristics of solar variability are reviewed: (1) as measured in detail over recent decades by instruments on-board artificial satellites; (2) as recorded in historical documents on the time-scale of centuries; and (3) as inferred on millennial time-scales from archived records of the cosmogenically generated isotopes 14 C and 10 Be. The older, proxy data comprise temperature changes reconstructed from tree ring studies and environmental changes deduced from multi-disciplinary studies of lake sediments. The effects of changes in ocean circulation and the sporadic influence of volcanic activity are also considered briefly. (author)

  6. Determination of primordial and cosmogenic radioactivity in achondritic meteorites by low-level, gamma-ray spectrometry

    International Nuclear Information System (INIS)

    Muntean, R.A.

    1979-08-01

    A high-sensitivity, low-background gamma-ray spectrometer containing two 23 cm by 13 cm thallium-activated, sodium iodide detectors was used to measure long-lived primordial and cosmogenic radioactivity in a suite of achondritic meteorites. Potassium, thorium, uranium, and 26 Al abundances were established for sixteen brecciated eucrites, two unbrecciated eucrites, a nakhlite, a chassignite, and a unique meteorite from Antarctica by nondestructive counting techniques. In several cases, multiple samples of the same meteorite fall were examined. Concentrations ranged from 79.8 ppM to 1150 ppM for potassium, 55.6 ppb to 663 ppb for thorium, 18.1 ppb to 190 ppb for uranium, and 45.0 dpm/kg to 99.0 dpm/kg for 26 Al. In addition, a 137 Cs concentration of 264 dpm/kg was observed in the Allan Hills 77005,9 specimen

  7. A gamma-gamma coincidence/anticoincidence spectrometer for low-level cosmogenic (22)Na/(7)Be activity ratio measurement.

    Science.gov (United States)

    Zhang, Weihua; Ungar, Kurt; Stukel, Matthew; Mekarski, Pawel

    2014-04-01

    In this study, a digital gamma-gamma coincidence/anticoincidence spectrometer was developed and examined for low-level cosmogenic (22)Na and (7)Be in air-filter sample monitoring. The spectrometer consists of two bismuth germanate scintillators (BGO) and an XIA LLC Digital Gamma Finder (DGF)/Pixie-4 software and card package. The spectrometer design allows a more selective measurement of (22)Na with a significant background reduction by gamma-gamma coincidence events processing. Hence, the system provides a more sensitive way to quantify trace amounts of (22)Na than normal high resolution gamma spectrometry providing a critical limit of 3 mBq within a 20 h count. The use of a list-mode data acquisition technique enabled simultaneous determination of (22)Na and (7)Be activity concentrations using a single measurement by coincidence and anticoincidence mode respectively. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Considerations on the activity concentration determination method for low-level waste packages and nuclide data comparison between different countries

    International Nuclear Information System (INIS)

    Kashiwagi, M.; Mueller, W.

    2000-01-01

    In low-level waste disposal, acceptable activity concentration limits are regulated for individual nuclides and groups of nuclides according to the conditions of each disposal site. Such regulated limits principally concern total alpha and beta /gamma activity as well as nuclides such as C-14, Ni-63, and Pu-238 which are long-lived and difficult to measure (hereinafter referred to as difficult-to-measure nuclides). Before waste packages are transported to the disposal site, the activities or activity concentrations of the regulated nuclides and groups of nuclides in the waste packages must be assessed and declared. A generally applicable theoretical method to determine these activities is lacking at present. Therefore, to meet this requirement, for NPP waste each country independently samples actual waste and carries out radiochemical analyses on these samples. The activity concentrations of difficult-to-measure nuclides are then determined by statistical correlation of the measured data between difficult-to-measure nuclides and Co-60 and Cs-137 which are measurable from outside the waste packages (hereinafter referred to as key nuclides). This method is called 'Scaling Factor Method'. It is widely adopted as a method for determining the activity concentrations of the limited nuclides in low-level waste packages from NPP, and it is also approved by responsible authorities in the respective country. In the past, each country independently determined scaling factors based on measurements on samples from the local NPPs. In the first part of this study, the possibility of an international scaling factor assessment using a database integrating data from different countries was studied by comparing radiochemical analysis data between Germany, Japan, and the United States. These countries have accumulated a large number of those nuclide data required to determine scaling factors. Statistical values such as correlation coefficients change with an accumulation of data. In

  9. Oxidative dissolution of spent fuel and release of nuclides from a copper/iron canister. Model developments and applications

    Energy Technology Data Exchange (ETDEWEB)

    Longcheng Liu

    2001-12-01

    Three models have been developed and applied in the performance assessment of a final repository. They are based on accepted theories and experimental results for known and possible mechanisms that may dominate in the oxidative dissolution of spent fuel and the release of nuclides from a canister. Assuming that the canister is breached at an early stage after disposal, the three models describe three sub-systems in the near field of the repository, in which the governing processes and mechanisms are quite different. In the model for the oxidative dissolution of the fuel matrix, a set of kinetic descriptions is provided that describes the oxidative dissolution of the fuel matrix and the release of the embedded nuclides. In particular, the effect of autocatalytic reduction of hexavalent uranium by dissolved H{sub 2}, using UO{sub 2} (s) on the fuel pellets as a catalyst, is taken into account. The simulation results suggest that most of the radiolytic oxidants will be consumed by the oxidation of the fuel matrix, and that much less will be depleted by dissolved ferrous iron. Most of the radiolytically produced hexavalent uranium will be reduced by the autocatalytic reaction with H{sub 2} on the fuel surface. It will reprecipitate as UO{sub 2} (s) on the fuel surface, and thus very little net oxidation of the fuel will take place. In the reactive transport model, the interactions of multiple processes within a defective canister are described, in which numerous redox reactions take place as multiple species diffuse. The effect of corrosion of the cast iron insert of the canister and the reduction of dissolved hexavalent uranium by ferrous iron sorbed onto iron corrosion products and by dissolved H{sub 2} are particularly included. Scoping calculations suggest that corrosion of the iron insert will occur primarily under anaerobic conditions. The escaping oxidants from the fuel rods will migrate toward the iron insert. Much of these oxidants will, however, be consumed

  10. An accuracy estimation on neutron penetration calculation through concrete shield with PALLAS codes using bunched component nuclides of concrete

    International Nuclear Information System (INIS)

    Sasamoto, Nobuo; Kotegawa, Hiroshi

    1984-11-01

    In order to improve computational efficiency of PALLAS code, an accuracy is estimated on the neutron penetration calculation through a concrete shield, using bunched component nuclides of concrete. The calculated fast neutron flux is observed to depend weakly on how the nuclides are bunched. Contrary to this, the calculated thermal neutron fluxes are strongly dependent on the manner of bunching, mainly due to the fact that iron cross section has exceptionally large negative sensitivity to thermal neutron flux. (author)

  11. Fission product model for lattice calculation of high conversion boiling water reactor

    International Nuclear Information System (INIS)

    Iijima, S.; Yoshida, T.; Yamamoto, T.

    1988-01-01

    A high precision fission product model for boiling water reactor (BWR) lattice calculation was developed, which consists of 45 nuclides to be treated explicitly and one nonsaturating pseudo nuclide. This model is applied to a high conversion BWR lattice calculation code. From a study based on a three-energy-group calculation of fission product poisoning due to full fission products and explicitly treated nuclides, the multigroup capture cross sections and the effective fission yields of the pseudo nuclide are determined, which do not depend on fuel types or reactor operating conditions for a good approximation. Apart from nuclear data uncertainties, the model and the derived pseudo nuclide constants would predict the fission product reactivity within an error of 0.1% Δk at high burnup

  12. RESUS: A code for low volatile radio-nuclide release from liquids due to vapor bubble burst induced liquid jet formation and disintegration

    International Nuclear Information System (INIS)

    Koch, M.K.; Starflinger, J.; Linnemann, Th.; Brockmeier, U.; Unger, H.; Schuetz, W.

    1995-01-01

    In the field of nuclear safety, the release of volatile and low volatile radio-nuclides from liquid surfaces into a gas atmosphere is important for aerosol source term considerations particularly in late severe accident sequences. In case of a hypothetical nuclear reactor accident involving a failure of the primary system, primary coolant and radio-nuclides may be released into the containment to frequently form a liquid pool which may be contaminated by suspended or solved fuel particles and fission products. Under this scope, the release code package REVOLS/RENONS was developed for radio-nuclide release from liquid surfaces. Assuming the absence of gas or vapor bubbles in the liquid, the evaporative release of volatile components, calculated by the REVOLS code, is governed by diffusive and convective transport processes, whereas the release of low volatiles, calculated by the RENONS code, may be governed by mechanical processes which leads to droplet entrainment in case of wavy liquid pool surface conditions into the containment atmosphere by means of convection. For many accident sequences, in which gas is injected into a pool or liquid area elsewhere, predominantly when saturation temperatures can be reached, the release of low volatile species from liquid surfaces due to bubble burst is identified as a decisive release mechanism also. Together with the liquid, the particles which are located at the pool surface or suspended in the pool, are released into the atmosphere. Consequently, the code RESUS.MOD1 (RESUSpension) is presently extended to include the calculation of the release of droplets and suspended radio-nuclide particles due to bubble burst induced liquid jet formation and disintegration above liquid surfaces. Experimental investigations indicate the influence of bubble volume and shape at the pool surface as well as bubble stabilization or destabilization, and furthermore the system pressure and temperatures as well as fluid properties, on droplet

  13. MENDL2 and IEAF-2001 nuclide production yields data bases verification at intermediate energies.

    Energy Technology Data Exchange (ETDEWEB)

    Titarenko, Y. E. (Yury E.); Batyaev, V. F. (Vyacheslav F.); Zhivun, V. M. (Valery M.); Mulambetov, R. D. (Ruslan D.); Mulambetova, S. V.; Zaitsev, S. L.; Lipatov, K. A.; Mashnik, S. G. (Stepan G.); Prael, R. E. (Richard E.)

    2004-01-01

    The work presents the results of computer simulation of two experiments which aim was measuring the threshold activation reaction rates in {sup 12}C, {sup 19}F, {sup 27}Al, {sup 59}Co, {sup 63}Cu, {sup 65}Cu, {sup 64}Zn, {sup 93}Nb, {sup 115}In, {sup 169}Tm, {sup 181}Ta, {sup 197}Au, and {sup 209}Bi thin samples placed inside and outside the 0.8-GeV proton-irradiated 4-cm thick W target and 92-cm thick W-Na composite target of 15-cm diameter both. In total, more than 1000 values of activation reaction were determined in the both experiments. The measured reaction rates were compared with the rates simulated by the LAHET code with the use of several nuclear databases for the respective excitation functions, namely, MENDL2/2P for neutron/proton cross sections up to 100 MeV, and recently developed IEAF-2001 that provides neutron cross sections up to 150 MeV. The comparison between the simulation-to-experiment agreements obtained via the MENDL2 and IEAF-2001 is presented. The agreement between simulation and experiment has been found generally satisfactory for both of the databases. The high-energy threshold excitation functions to be used in the activation-based unfolding of neutron spectra inside the Accelerator Driven Systems (ADS), particularly with Na-cooled W targets, can be inferred from the results.

  14. Migration studies of the fission product nuclides in rocks: Pt. 1

    Energy Technology Data Exchange (ETDEWEB)

    Ruiyuan, Wen; Hongcheng, Gao; Chenghua, Jiang; Yuanfang, Liu [Beijing Univ., BJ (China). Dept. of Technical Physics

    1991-11-01

    A most promising way being considered for the disposal of radioactive waste is deep geological in rocks, such as granite and limestone. Different measurements have been made on granite and limestone sampled from the suburbs of Beijing. {sup 75}Se(SeO{sub 3}{sup 2-}) is used as a tracer simulating the long-lived {sup 79}Se. The diffusion experiment is carried out in a diffusion cell which is designed and fabricated in the laboratory of Department of Technical Physics, Peking University. Details of the experimental technique and method of analysis are described and the most important diffusion parameters, namely, intrinsic diffusion coefficient D{sub i9} rock capacity factor and sorption coefficient K are given. The implications of the results are discussed.

  15. Migration studies of the fission product nuclides in rocks: Pt. 1

    International Nuclear Information System (INIS)

    Wen Ruiyuan; Gao Hongcheng; Jiang Chenghua; Liu Yuanfang

    1991-01-01

    A most promising way being considered for the disposal of radioactive waste is deep geological in rocks, such as granite and limestone. Different measurements have been made on granite and limestone sampled from the suburbs of Beijing. 75 Se(SeO 3 2- ) is used as a tracer simulating the long-lived 79 Se. The diffusion experiment is carried out in a diffusion cell which is designed and fabricated in the laboratory of Department of Technical Physics, Peking University. Details of the experimental technique and method of analysis are described and the most important diffusion parameters, namely, intrinsic diffusion coefficient D i9 rock capacity factor and sorption coefficient K are given. The implications of the results are discussed

  16. Proton induced nuclide production cross section by HETC-3STEP/FRG-R

    Energy Technology Data Exchange (ETDEWEB)

    Shigyo, Nobuhiro; Ishibashi, Kenji [Kyushu Univ., Fukuoka (Japan); Yoshizawa, Nobuaki; Takada, Hiroshi

    1998-03-01

    High Energy Transport Code (HETC) based on the intranuclear-cascade-evaporation model is modified to calculate the fragmentation cross section. The exciton model is adopted for improvement of backward nucleon-emission cross section for low-energy nucleon-incident events. The level density parameter depending on the excitation energy is taken in the evaporation process. The fragmentation reaction is incorporated into HETC as a subroutine set by the use of the systematics of the reaction. The modified HETC (HETC-3STEP/FRG-R) reproduces experimental fragment yields to a reasonable degree. (author)

  17. Research on changes of nitrate by interactions with metals under the wastes disposal environment containing TRU nuclide

    International Nuclear Information System (INIS)

    Wada, Ryutaro; Nishimura, Tsutomu; Masuda, Kaoru; Fujiwara, Kazuo; Imakita, Tsuyoshi; Tateishi, Tsuyoshi

    2003-02-01

    There exists the waste including a nitrate ion as a salt in the TRU waste materials. This nitrate ion can transferred to the nitrite ion and/or ammonia by reducing materials such as metals in the waste disposal environment, and has the possibility to affect on the disposal environment and nuclide transfer parameters. Therefore, electrochemical tests were conducted to evaluate the reaction rate parameters of the nitrate ion and metals under the low oxygen environment. The long-term reaction test using the glass-seal vessel was also conducted to grasp precisely the nitrate ion transition reaction rate and the gas generation rate caused by the reaction of metal and the nitrate ion coexist solution. (1) Reaction rate constants under various environments were obtained performing the potentiostatic holding tests with the parameters of the solution pH, temperature, and the nitrate and nitrite ion concentrations. The formula of the nitrate ion transition reaction rate was also examined based on these obtained data. (2) Conducting the immersion tests under the environment of the low oxygen and high-pH rainfall underground water site, the long-term reaction rate data were obtained on the reaction products (ammonia, hydrogen gas etc.) of metals (carbon steel, stainless steel and zircaloy etc.) with nitrate ion. The tests under the same conditions as in the past were also conducted to evaluate the test accuracy and error range of the long-term reaction test with the glass-seal vessels. (author)

  18. Determination of radio nuclides for some local foodstuffs in Republic of Yemen by using gamma rays spectral analysis technique

    International Nuclear Information System (INIS)

    Al-Maqtary, K.; Murshid, M.; Bazohair, A.; Al-Zuhairy, M.

    2008-01-01

    This study is considered as the first research study on locally produced consumed food in the Republic of Yemen. The objective of this study is to measure concentration of radio nuclides 137 Cs and 40 K In food samples produced in Yemen. Twenty two local foodstuffs samples were collected from provinces. The mar IBB, Hudiadah and Lahj, due to the massive crops production. Gamma spectroscopy consist of high purity germanium (HPGe) detector with resolution of 2.11 KeV at 1332 ke v energy which related to 6 0Co isotope. The detector is interfaced to two amplifiers and multichannel analyzer (mca). the maximum concentration of 13C s was found in garden pea samples brought from Lahj province 13± 1.5 Bq/kg. The minimum concentration was found in wheat samples brought from Them ar province 2.5± 0.2 Bq/Kg. The maximum concentration of 4 0K was found in garden pea samples brought from Lahj. 1000±15 Bq/kg. The minimum concentration was in forage sorghum samples brought from Hudaidah 40±1.5 Bq/kg. The studies samples are radiological safe and okay for human consumption. (author)

  19. Transfer of nuclides from the water phase to the sediments during normal and extraordinary hydrological cycles

    International Nuclear Information System (INIS)

    1985-07-01

    Atucha I and Atucha II nuclear power plants are located on the right margin of the Parana de las Palmas river. This river belongs to the Cuenca del Plata, whose 1982-1983 hydrologic cycle registered the greatest freshets of the century. Works and studies previously fixed had to be altered and investigations were adapted to the possibilities and the particular hydric conditions verified. Considerations on the transfer of nuclides between water and sediments are presented. The floods reduce the water-sediments contact time on the bed of the river. In outer areas, the waters labelled by the nuclear power plant effluent discharge favor the infiltration in alluvial soils, as well as the exchange with the sediments. The investigations carried out for the phase near to the discharge of liquid effluents (related to the critical group) made possible to prove the characteristics of the path of the liquid wastes released, the distribution coefficient and the fixation or penetrability of some nuclides in soils of the floody valley. In this manner, a balance of radioactive nuclides incorporated to soils and sediments from the neighbourhood of Atucha and the water-course of Parana de las Palmas river is obtained. The presence of 60 Co and 137 Cs in the floody soils on the right margin of this river was detected and measured during the greatest flood of the century. On the other hand, 144 Ce, 51 Cr, 106 Ru and 90 Sr have not been detected. The detection of artificial radioisotopes turns out to be impossible in normal hydrological years, even in the sorroundings of the nuclear power plant or the critical group (from the point of view of the surface waters, The Fishing Club, 3 km down stream). (M.E.L.) [es

  20. Decontamination Experiments on Intact Pig Skin Contaminated with Beta-Gamma- Emitting Nuclides

    Energy Technology Data Exchange (ETDEWEB)

    Edvardsson, K A; Hagsgaard, S [AB Atomenergi, Nykoeping (Sweden); Swensson, A [Dept. of Occupational Medicine, Karolinska Sjukhuset, Stockholm (Sweden)

    1966-11-15

    A number of decontamination experiments have been performed on intact pig skin. In most of the experiments NaI-131 in water solution has been utilized because this nuclide is widely used within the Studsvik research establishment, is easy to detect and relatively harmless, and is practical to use in these experiments. Among the {beta} {gamma}-nuclides studied 1-131 has furthermore proved to be the one most difficult to remove from the skin. The following conclusions and recommendations regarding the decontamination of skin are therefore valid primarily for iodine in the form of Nal, but are probably also applicable to many other {beta} {gamma}-nuclides. a) A prolonged interval between contamination and decontamination has a negative effect on the result of the decontamination. Therefore start decontamination as soon as possible after the contamination. b) Soap and water has proved to be the most suitable decontamination agent. A number of other agents have appeared to be harmful to the skin. Therefore, first of all use only soap and water in connection with gentle rubbing. c) No clear connection between the temperature of the water for washing and the result of the decontamination has been demonstrated. d) Skin not degreased before the contamination seems to be somewhat easier to decontaminate than degreased skin, particularly if the activity has been on the skin for a long time. Therefore do not remove the sebum of the skin when engaged on radioactive work involving contamination risks. e) Irrigation of the contaminated surface with a solution containing the corresponding inactive ions or ordinary water in large quantities may considerably decrease the skin contamination. f) In radioactive work of long duration involving high risks of contamination prophylactic measures in the form of a protective substance ('invisible glove'), type Kerodex, may make decontamination easier.