WorldWideScience

Sample records for copper isotopes

  1. Copper isotope fractionation by desert shrubs

    Energy Technology Data Exchange (ETDEWEB)

    Navarrete, Jesica U., E-mail: jnavarrete2@miners.utep.edu [University of Texas at El Paso, Department of Geological Sciences, 500 W. University Ave, El Paso, TX 79968 (United States); Viveros, Marian; Ellzey, Joanne T. [University of Texas at El Paso, Department of Biological Sciences, El Paso, TX 79968 (United States); Borrok, David M. [University of Texas at El Paso, Department of Geological Sciences, 500 W. University Ave, El Paso, TX 79968 (United States)

    2011-06-15

    Copper has two naturally occurring stable isotopes of masses 63 and 65 which can undergo mass dependent fractionation during various biotic and abiotic chemical reactions. These interactions and their resulting Cu isotope fractionations can be used to determine the mechanisms involved in the cycling of Cu in natural systems. In this study, Cu isotope changes were investigated at the organismal level in the metal-accumulating desert plant, Prosopis pubescens. Initial results suggest that the lighter Cu isotope was preferentially incorporated into the leaves of the plant, which may suggest that Cu was actively transported via intracellular proteins. The roots and stems show a smaller degree of Cu isotope fractionation and the direction and magnitude of the fractionations was dependent upon the levels of Cu exposure. Based on this and previous work with bacteria and yeast, a trend is emerging that suggests the lighter Cu isotope is preferentially incorporated into biological components, while the heavier Cu isotope tends to become enriched in aqueous solutions. In bacteria, plants and animals, intracellular Cu concentrations are strictly regulated via dozens of enzymes that can bind, transport, and store Cu. Many of these enzymes reduce Cu(II) to Cu(I). These initial results seem to fit into a broader picture of Cu isotope cycling in natural systems where oxidation/reduction reactions are fundamental in controlling the distributions of Cu isotopes.

  2. Discovery of Chromium, Manganese, Nickel, and Copper Isotopes

    CERN Document Server

    Garofali, K; Thoennessen, M

    2010-01-01

    Twenty-seven chromium, twenty-five manganese, thirty-one nickel and twenty-six copper isotopes have so far been observed and the discovery of these isotopes is discussed. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.

  3. Coper Isotope Fractionation in Porphyry Copper Deposits: A Controlled Experiment

    Science.gov (United States)

    Ruiz, J.; Mathur, R.; Uhrie, J. L.; Hiskey, B.

    2001-12-01

    Previous studies have shown that copper is fractionated in the environment. However, the mechanisms for isotope fractionation and the role of organic and inorganic processes in the fractionation are not well understood. Here we used the well controlled experiments used by Phelps Dodge Corporation aimed at leaching copper from their ore deposits to constrain the mechanism of copper isotope fractionation in natural systems. The isotope data were collected on a Micromass Isoprobe. High temperature copper sulfides from ore deposits in Chile and Arizona yield delta 65Cu near 0 permil. The reproducibility of the data is better that 0.1 permil. Controlled experiments consisting of large columns of rocks were fed solutions containing bacteria such as Thiobacillus ferroxidans and Leptospirrilium ferroxidan. Solutions fom the columns were sampled for sixty days and analyzed for copper concentrations, oxidation potential, ferrous/ferric ratios and pH. The results indicate that the bacterially aided dissolution of copper fractionated copper. Preliminary experiments of copper dissolution not using bacteria show no isotope fractionation The original rock in the experiment has a delta 65Cu of -2.1. The first solutions that were collected from the columns had a delta 65Cu of -5.0 per mil. The liquid changed its isotopic composition from -50 to -10 during the sixty days of sampling. The greatest shift in the isotope ratios occurred the first 30 days when the copper recovered was less than 40% and the ferrous/ferric ratios were somewhat constant. At approximately 35 days after the start of the experiments, the copper recovery increases the ferrousferric ratio decreased and the copper isotope ratio of the fluids remained fairly constant. The data suggest that the bacteria are required to effectively fractionate copper isotopes in natural systems and that the mechanisms of bacterial aided copper dissolution may include a direct dissolution of the sulfides by the bacteria. Experiments

  4. Copper isotope signatures in modern marine sediments

    Science.gov (United States)

    Little, Susan H.; Vance, Derek; McManus, James; Severmann, Silke; Lyons, Timothy W.

    2017-09-01

    The development of metal stable isotopes as tools in paleoceanography requires a thorough understanding of their modern marine cycling. To date, no Cu isotope data has been published for modern sediments deposited under low oxygen conditions. We present data encompassing a broad spectrum of hydrographic and redox regimes, including continental margin and euxinic (sulphide-containing) settings. Taken together with previously published data from oxic settings, these data indicate that the modern oceanic sink for Cu has a surprisingly homogeneous isotopic composition of about +0.3‰ (δ65Cu, relative to NIST SRM976). We suggest that this signature reflects one of two specific water-column processes: (1) an equilibrium isotope fractionation between soluble, isotopically heavy, Cu complexed to strong organic ligands and an isotopically light pool sorbed to particles that deliver Cu to the sediment, or (2) an equilibrium isotope fractionation between the same isotopically heavy ligand-bound pool and the particle reactive free Cu2+ species, with the latter being scavenged by particulates and thereby delivered to the sediment. An output flux of about +0.3‰ into sediments is isotopically light relative to the known inputs to the ocean (at around +0.6‰) and the seawater value of +0.6 to +0.9‰, suggesting the presence of an as yet unidentified isotopically light source of Cu to the oceans. We hypothesize that this source may be hydrothermal, or may result from the partial dissolution of continentally derived particles.

  5. Collinear resonant ionization spectroscopy for neutron rich copper isotopes

    CERN Multimedia

    This proposal aims to study the spins, magnetic moments and quadrupole moments of copper isotopes A=76-78. The information obtained from this experiment will provide an independent and more precise measurement of the magnetic moment of $^{77}$Cu and values for the spins and magnetic moments of $^{76,78}$Cu as well as the quadrupole moments of $^{76-78}$Cu.

  6. Copper isotopes as monitors of redox processes in hydrothermal mineralization

    Science.gov (United States)

    Markl, Gregor; Lahaye, Yann; Schwinn, Gregor

    2006-08-01

    The stable copper isotope composition of 79 samples of primary and secondary copper minerals from hydrothermal veins in the Schwarzwald mining district, South Germany, shows a wide variation in δ65Cu ranging from -2.92 to 2.41‰. We investigated primary chalcopyrite, various kinds of fahlores and emplectite, as well as supergene native copper, malachite, azurite, cuprite, tenorite, olivenite, pseudomalachite and chrysocolla. Fresh primary Cu(I) ores have at most localities copper isotope ratios ( δ65Cu values) of 0 ± 0.5‰ despite the fact that the samples come from mineralogically different types of deposits covering an area of about 100 by 50 km and that they formed during three different mineralization events spanning the last 300 Ma. Relics of the primary ores in oxidized samples (i.e., chalcopyrite relics in an iron oxide matrix with an outer malachite coating) display low isotope ratios down to -2.92‰. Secondary Cu(I) minerals such as cuprite have high δ65Cu values between 0.4 and 1.65‰, whereas secondary Cu(II) minerals such as malachite show a range of values between -1.55 and 2.41‰, but typically have values above +0.5‰. Within single samples, supergene oxidation of fresh chalcopyrite with a δ value of 0‰ causes significant fractionation on the scale of a centimetre between malachite (up to 1.49‰) and relict chalcopyrite (down to -2.92‰). The results show that—with only two notable exceptions—high-temperature hydrothermal processes did not lead to significant and correlatable variations in copper isotope ratios within a large mining district mineralized over a long period of time. Conversely, low-temperature redox processes seriously affect the copper isotope compositions of hydrothermal copper ores. While details of the redox processes are not yet understood, we interpret the range in compositions found in both primary Cu(I) and secondary Cu(II) minerals as a result of two competing controls on the isotope fractionation process

  7. Isotopic constraints on biogeochemical cycling of copper in the ocean.

    Science.gov (United States)

    Takano, Shotaro; Tanimizu, Masaharu; Hirata, Takafumi; Sohrin, Yoshiki

    2014-12-05

    Trace elements and their isotopes are being actively studied as powerful tracers in the modern ocean and as proxies for the palaeocean. Although distributions and fractionations have been reported for stable isotopes of dissolved Fe, Cu, Zn and Cd in the ocean, the data remain limited and only preliminary explanations have been given. Copper is of great interest because it is either essential or toxic to organisms and because its distribution reflects both biological recycling and scavenging. Here we present new isotopic composition data for dissolved Cu (δ(65)Cu) in seawater and rainwater. The Cu isotopic composition in surface seawater can be explained by the mixing of rain, river and deep seawater. In deep seawater, δ(65)Cu becomes heavier with oceanic circulation because of preferential scavenging of the lighter isotope ((63)Cu). In addition, we constrain the marine biogeochemical cycling of Cu using a new box model based on Cu concentrations and δ(65)Cu.

  8. Determining Prehistoric Mining Practices in Southeastern Europe Using Copper Isotopes

    Science.gov (United States)

    Powell, Wayne; Mathur, Ryan; Bankoff, H. Arthur; Bulatović, Aleksandar; Filipović, Vojislav

    2017-04-01

    Copper was first smelted from malachite at 5000 BCE in Serbia. There the Eneolithic (Copper Age) began with the production of small jewelry pieces and progressed to the casting of massive copper tools near its end, approximately 2000 years later. However, copper metallurgy in southeastern Europe ceased or significantly decreased in the later third millennium, several centuries before the Bronze Age began. Whether this metallurgical hiatus was the result a cultural shift or depletion of natural resources remains an ongoing subject of debate. It has been speculated that the marked reduction in metal production at the Eneolithic-Bronze Age transition was due to the exhaustion of surficial weathered oxide ores and the technical inability to smelt the underlying sulfide minerals. The behavior of copper isotopes in near-surface environments allows us to differentiate highly weathered oxide ores that occur at Earth's surface from non-weathered sulfide ores that occur at greater depth. The oxidation of copper generates fluids and associated minerals that are enriched in the 65Cu isotope. Thus, oxidative weathering of sulfide ores leads to the development of three stratified isotopic reservoirs for copper: 1) oxides above the water table that are enriched in 65Cu; 2) residual weathered sulfides minerals at the water table that are depleted in 65Cu; and 3) non-fractionated, non-weathered sulfide ore below the water table. And so, the transformative shift to sulfide-based metallurgy will be delineated by a significant decrease in δ65Cu in copper artifacts corresponding to the first use of 65Cu-depleted residual ore. The degree of variability of primary ore composition from numerable ore deposits would likely result in the overlap of copper isotope composition between populations of artifacts. Therefore, shifts in the mean copper isotope values and associated standard deviations would best reflect changes in ores use. A baseline value of -0.2‰ ±0.5 (1) was determined

  9. Isotope geology of the bakircay porphyry copper prospect, northern turkey

    Science.gov (United States)

    Taylor, R. P.

    1981-10-01

    Isotopic data for the Bakircay granodiorite porphyry, MediaObjects/126_2005_BF01798964_f1.tif give a Late Eocene age for the development of the porphyry copper system. They suggest a close temporal and genetic relationship between igneous and hydrothermal activity, and indicate that magmatic-hydrothermal fluids produced potassic alteration and that meteoric fluids enriched in radiogenic87Sr were responsible for propylitic alteration. The granodiorite porphyry is petrologically similar to porphyry copper-related intrusions from island arc and continental margin settings, which form a group with initial87Sr/86Sr ratios of less than 0. 7043, representing magmas produced in tectonic environments lacking any important component of old (i. e. Precambrian) continental material.

  10. $\\beta$-NMR of copper isotopes in ionic liquids

    CERN Multimedia

    We propose to test the feasibility of spin-polarization and $\\beta$-NMR studies on several short-lived copper isotopes, $^{58}$ Cu, $^{74}$Cu and $^{75}$Cu in crystals and liquids. The motivation is given by biological studies of Cu with $\\beta$-NMR in liquid samples, since Cu is present in a large number of enzymes involved in electron transfer and activation of oxygen. The technique is based on spin-polarization via optical pumping in the new VITO beamline. We will use the existing lasers, NMR magnet and NMR chambers and we will prepare a new optical pumping system. The studies will be devoted to tests of achieved $\\beta$-asymmetry in solid hosts, the behaviour of asymmetry when increasing vacuum, and finally NMR scans in ionic liquids. The achieved spin polarization will be also relevant for the plans to measure with high precision the magnetic moments of neutron-rich Cu isotopes.

  11. Copper in soil fractions and runoff in a vineyard catchment: Insights from copper stable isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Babcsányi, Izabella; Chabaux, François; Granet, Mathieu; Meite, Fatima; Payraudeau, Sylvain; Duplay, Joëlle; Imfeld, Gwenaël, E-mail: imfeld@unistra.fr

    2016-07-01

    Understanding the fate of copper (Cu) fungicides in vineyard soils and catchments is a prerequisite to limit the off-site impact of Cu. Using Cu stable isotopes, Cu retention in soils and runoff transport was investigated in relation to the use of Cu fungicides and the hydrological conditions in a vineyard catchment (Rouffach, Haut-Rhin, France; mean slope: 15%). The δ{sup 65}Cu values of the bulk vineyard soil varied moderately through the depth of the soil profiles (− 0.12 to 0.24‰ ± 0.08‰). The values were in the range of those of the fungicides (− 0.21 to 0.11‰) and included the geogenic δ{sup 65}Cu value of the untreated soil (0.08‰). However, δ{sup 65}Cu values significantly differed between particle-size soil fractions (− 0.37 ± 0.10‰ in fine clays and 0.23 ± 0.07‰ in silt). Together with the soil mineralogy, the results suggested Cu isotope fractionation primarily associated with the clay and fine clay fractions that include both SOM and mineral phases. The vegetation did not affect the Cu isotope patterns in the vineyard soils. Cu export by runoff from the catchment accounted for 1% of the applied Cu mass from 11th May to 20{sup th} July 2011, covering most of the Cu use period. 84% of the exported Cu mass was Cu bound to suspended particulate matter (SPM). The runoff displayed δ{sup 65}Cu values from 0.52 to 1.35‰ in the dissolved phase (< 0.45 μm) compared to − 0.34 to − 0.02‰ in the SPM phase, indicating that clay and fine clay fractions were the main vectors of SPM-bound Cu in runoff. Overall, this study shows that Cu stable isotopes may allow identifying the Cu distribution in the soil fractions and their contribution to Cu export in runoff from Cu-contaminated catchments. - Highlights: • We investigated Cu sorption processes in vineyard soils and runoff transport. • Cu export by runoff from the catchment accounted for 1% of the applied Cu mass. • δ{sup 65}Cu values differed between the particle-size soil

  12. Copper in soil fractions and runoff in a vineyard catchment: Insights from copper stable isotopes.

    Science.gov (United States)

    Babcsányi, Izabella; Chabaux, François; Granet, Mathieu; Meite, Fatima; Payraudeau, Sylvain; Duplay, Joëlle; Imfeld, Gwenaël

    2016-07-01

    Understanding the fate of copper (Cu) fungicides in vineyard soils and catchments is a prerequisite to limit the off-site impact of Cu. Using Cu stable isotopes, Cu retention in soils and runoff transport was investigated in relation to the use of Cu fungicides and the hydrological conditions in a vineyard catchment (Rouffach, Haut-Rhin, France; mean slope: 15%). The δ(65)Cu values of the bulk vineyard soil varied moderately through the depth of the soil profiles (-0.12 to 0.24‰±0.08‰). The values were in the range of those of the fungicides (-0.21 to 0.11‰) and included the geogenic δ(65)Cu value of the untreated soil (0.08‰). However, δ(65)Cu values significantly differed between particle-size soil fractions (-0.37±0.10‰ in fine clays and 0.23±0.07‰ in silt). Together with the soil mineralogy, the results suggested Cu isotope fractionation primarily associated with the clay and fine clay fractions that include both SOM and mineral phases. The vegetation did not affect the Cu isotope patterns in the vineyard soils. Cu export by runoff from the catchment accounted for 1% of the applied Cu mass from 11th May to 20(th) July 2011, covering most of the Cu use period. 84% of the exported Cu mass was Cu bound to suspended particulate matter (SPM). The runoff displayed δ(65)Cu values from 0.52 to 1.35‰ in the dissolved phase (<0.45μm) compared to -0.34 to -0.02‰ in the SPM phase, indicating that clay and fine clay fractions were the main vectors of SPM-bound Cu in runoff. Overall, this study shows that Cu stable isotopes may allow identifying the Cu distribution in the soil fractions and their contribution to Cu export in runoff from Cu-contaminated catchments.

  13. A solvent extraction technique for the isotopic measurement of dissolved copper in seawater

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, Claire M., E-mail: claire.thompson@anu.edu.au; Ellwood, Michael J., E-mail: michael.ellwood@anu.edu.au; Wille, Martin, E-mail: martin.wille@uni-tuebingen.de

    2013-05-02

    Graphical abstract: -- Highlights: •A new sample preparation method for seawater copper isotopic analysis (δ{sup 65}Cu). •Solvent-extraction was used to pre-concentrate metals from seawater samples. •Anion-exchange was used to purify copper from the metal-rich extract. •δ{sup 65}Cu was measured in the north Tasman Sea. •Seawater δ{sup 65}Cu may be linked to marine biological activity. -- Abstract: Stable copper (Cu) isotope geochemistry provides a new perspective for investigating and understanding Cu speciation and biogeochemical Cu cycling in seawater. In this work, sample preparation for isotopic analysis employed solvent-extraction with amino pyrollidine dithiocarbamate/diethyl dithiocarbamate (APDC/DDC), coupled with a nitric acid back-extraction, to concentrate Cu from seawater. This was followed by Cu-purification using anion-exchange. This straightforward technique is high yielding and fractionation free for Cu and allows precise measurement of the seawater Cu isotopic composition using multi-collector inductively coupled plasma mass-spectrometry. A deep-sea profile measured in the oligotrophic north Tasman Sea shows fractionation in the Cu isotopic signature in the photic zone but is relatively homogenised at depth. A minima in the Cu isotopic profile correlates with the chlorophyll a maximum at the site. These results indicate that a range of processes are likely to fractionate stable Cu isotopes in seawater.

  14. Natural variations of copper and sulfur stable isotopes in blood of hepatocellular carcinoma patients

    Science.gov (United States)

    Balter, Vincent; Nogueira da Costa, Andre; Paky Bondanese, Victor; Jaouen, Klervia; Lamboux, Aline; Sangrajrang, Suleeporn; Vincent, Nicolas; Fourel, François; Télouk, Philippe; Gigou, Michelle; Lécuyer, Christophe; Srivatanakul, Petcharin; Bréchot, Christian; Albarède, Francis; Hainaut, Pierre

    2015-01-01

    The widespread hypoxic conditions of the tumor microenvironment can impair the metabolism of bioessential elements such as copper and sulfur, notably by changing their redox state and, as a consequence, their ability to bind specific molecules. Because competing redox state is known to drive isotopic fractionation, we have used here the stable isotope compositions of copper (65Cu/63Cu) and sulfur (34S/32S) in the blood of patients with hepatocellular carcinoma (HCC) as a tool to explore the cancer-driven copper and sulfur imbalances. We report that copper is 63Cu-enriched by ∼0.4‰ and sulfur is 32S-enriched by ∼1.5‰ in the blood of patients compared with that of control subjects. As expected, HCC patients have more copper in red blood cells and serum compared with control subjects. However, the isotopic signature of this blood extra copper burden is not in favor of a dietary origin but rather suggests a reallocation in the body of copper bound to cysteine-rich proteins such as metallothioneins. The magnitude of the sulfur isotope effect is similar in red blood cells and serum of HCC patients, implying that sulfur fractionation is systemic. The 32S-enrichment of sulfur in the blood of HCC patients is compatible with the notion that sulfur partly originates from tumor-derived sulfides. The measurement of natural variations of stable isotope compositions, using techniques developed in the field of Earth sciences, can provide new means to detect and quantify cancer metabolic changes and provide insights into underlying mechanisms.

  15. Natural variations of copper and sulfur stable isotopes in blood of hepatocellular carcinoma patients.

    Science.gov (United States)

    Balter, Vincent; Nogueira da Costa, Andre; Bondanese, Victor Paky; Jaouen, Klervia; Lamboux, Aline; Sangrajrang, Suleeporn; Vincent, Nicolas; Fourel, François; Télouk, Philippe; Gigou, Michelle; Lécuyer, Christophe; Srivatanakul, Petcharin; Bréchot, Christian; Albarède, Francis; Hainaut, Pierre

    2015-01-27

    The widespread hypoxic conditions of the tumor microenvironment can impair the metabolism of bioessential elements such as copper and sulfur, notably by changing their redox state and, as a consequence, their ability to bind specific molecules. Because competing redox state is known to drive isotopic fractionation, we have used here the stable isotope compositions of copper ((65)Cu/(63)Cu) and sulfur ((34)S/(32)S) in the blood of patients with hepatocellular carcinoma (HCC) as a tool to explore the cancer-driven copper and sulfur imbalances. We report that copper is (63)Cu-enriched by ∼0.4‰ and sulfur is (32)S-enriched by ∼1.5‰ in the blood of patients compared with that of control subjects. As expected, HCC patients have more copper in red blood cells and serum compared with control subjects. However, the isotopic signature of this blood extra copper burden is not in favor of a dietary origin but rather suggests a reallocation in the body of copper bound to cysteine-rich proteins such as metallothioneins. The magnitude of the sulfur isotope effect is similar in red blood cells and serum of HCC patients, implying that sulfur fractionation is systemic. The (32)S-enrichment of sulfur in the blood of HCC patients is compatible with the notion that sulfur partly originates from tumor-derived sulfides. The measurement of natural variations of stable isotope compositions, using techniques developed in the field of Earth sciences, can provide new means to detect and quantify cancer metabolic changes and provide insights into underlying mechanisms.

  16. Use of a stable copper isotope (65Cu) in the differential diagnosis of Wilson's disease.

    Science.gov (United States)

    Lyon, T D; Fell, G S; Gaffney, D; McGaw, B A; Russell, R I; Park, R H; Beattie, A D; Curry, G; Crofton, R J; Gunn, I

    1995-06-01

    1. 65Cu/63Cu stable-isotope ratios have been measured in blood serum after oral administration of the stable isotope 65Cu. The incorporation of the isotope into the plasma protein pool was followed at various times for up to 3 days. The resulting patterns of enrichment in healthy control subjects, in Wilson's disease patients and in heterozygotes for the Wilson's disease gene, were similar in appearance to those found by others using copper radioactive isotopes. After an initially high enrichment at 2 h after dosage, the Wilson's disease cases, in contrast to the control subjects, did not show a secondary rise in isotope enrichment of the plasma pool after 72 h, demonstrating a failure to incorporate copper into caeruloplasmin. The Wilson's disease heterozygotes had variable degrees of impairment of isotope incorporation, not always distinguished from those of control subjects. 2. The stability of the isotope also permits the copper tracer to be followed for a longer period. Ten healthy subjects were studied for over 40 days, allowing the biological half-time of an oral dose of copper to be determined (median 18.5 days, 95% confidence interval 14-26 days). Known heterozygotes for the Wilson's disease gene were found to have a significantly increased biological half-time for removal of copper from the plasma pool (median 43 days, 95% confidence interval 32-77 days). 3. The incorporation of 65 Cu in patients with diseases of the liver (other than Wilson's disease) was found to be similar to that in control subjects, aiding differential diagnosis.

  17. The behaviour of copper isotopes during igneous processes

    Science.gov (United States)

    Savage, P. S.; Moynier, F.; Harvey, J.; Burton, K. W.

    2015-12-01

    Application of Cu isotopes to high temperature systems has recently gained momentum and has the potential for probing sulphide fractionation during planetary differentiation [1]. This requires robust estimates for planetary reservoirs, and a fundamental understanding of how igneous processes affect Cu isotopes; this study aims to tackle the latter. Cogenetic suites affected by both fractionation crystallisation and cumulate formation were analysed to study such effects on Cu isotopes. In S-undersatured systems, Cu behaves incompatibly during melt evolution and the Cu isotope composition of such melt is invariant over the differentiation sequence. In contrast, S-saturated systems show resolvable Cu isotope variations relative to primitive melt. Such variations are minor but imply a slightly heavy Cu isotope composition for continental crust compared to BSE, consistent with granite data [2]. Although olivine accumulation does not affect Cu isotopes, spinel-hosted Cu is isotopically light relative to the bulk. Analysis of variably melt-depleted cratonic peridotites shows that partial melting can affect Cu isotope composition in restite, with the depleted samples isotopically light compared to BSE. This could be due to residual spinel and/or incongruent melting of sulphides - individual sulphides picked from a single xenolith reveal a range of Cu isotope compositions, dependent on composition. Although partial melting may fractionate Cu isotopes, models suggest most mantle-derived melt will have δ65Cu ≈ BSE, as most source Cu will be transferred to the melt. Small degree melts such as ocean island basalts are predicted to be isotopically heavier than MORB, if derived from a primitive mantle source. OIBs have a range of Cu isotope compositions: some are heavier than MORB as predicted; however, some have much lighter compositions. Since Cu isotopes can be significantly fractionated in the surface environment [e.g. 3] OIB Cu isotopic variations may be linked to

  18. Theoretical calculation of equilibrium copper (I) isotope fractionations in ore-forming fluid

    Science.gov (United States)

    Seo, J.; Lee, I.; Lee, S.

    2006-05-01

    Equilibrium isotope fractionation of Cu (I) complexes in hydrothermal ore-forming fluid is calculated. Ab-initio quantum calculation of molecular structures and vibrational frequencies is conducted by Density Functional Theory (DFT) and Hartree-Fock Self Consistent Field (HF-SCF) method. Cu isotope (65Cu, 63Cu) exchange is expressed as reduced partition function ratios, 103·ln(β65-63), for liquid phase complexes (copper chlorides, copper hydrosulfides), and vapor phase complexes (hydrated copper chloride). Isodensity Polarizable Continuum Model (IPCM) is applied to the liquid complexes, whereas the vapor complexes are calculated in vacuo. Large fractionation (more than 2‰ at 25°C) is predicted between coexisting phases without changing oxidation state. CuCl(H2O)2 (vapor phase) is enriched in 65Cu better than any other studied complexes, whereas [CuCl3]2- (liquid phase) is mostly depleted. Heavy copper isotope is favor to partition into vapor phase complexes than coexisting liquid phase complexes. In the sea-floor hydrothermal system, after separation of phases into vapor and brine, vapor phase (CuCl(H2O)2) and chlorine-rich brine ([CuCl3]2-) will show +0.418‰ and -0.688‰ deviation from [CuCl2]1- at 150°C, respectively. However, most of the dominant copper-bearing species in hydrothermal condition, [CuCl2]1- and [Cu(HS)2]1-, fractionate at almost the same degree. Possible ranges of copper isotope ratio, δ65Cu, can be constrained from the calculated equilibrium isotope fractionation. Changes of oxidation state in low-temperature (e.g. supergene formation) have been thought to trigger most copper isotope fractionations, so far. However, measurable Cu isotope fractionation (1.106‰ at 150°C and 0.615‰ at 300°C) in hydrothermal ore-forming fluid is predicted within +1 valence state by theoretical study. Molecular structures and vibrational frequencies are compared with measured data. However, there is no experimental or theoretical work of some molecules

  19. Copper isotope fractionation between aqueous compounds relevant to low temperature geochemistry and biology

    Science.gov (United States)

    Fujii, Toshiyuki; Moynier, Frédéric; Abe, Minori; Nemoto, Keisuke; Albarède, Francis

    2013-06-01

    Isotope fractionation between the common Cu species present in solution (Cu+, Cu2+, hydroxide, chloride, sulfide, carbonate, oxalate, and ascorbate) has been investigated using both ab initio methods and experimental solvent extraction techniques. In order to establish unambiguously the existence of equilibrium isotope fractionation (as opposed to kinetic isotope fractionation), we first performed laboratory-scale liquid-liquid distribution experiments. Upon exchange between HCl medium and a macrocyclic complex, the 65Cu/63Cu ratio fractionated by -1.06‰ to -0.39‰. The acidity dependence of the fractionation was appropriately explained by ligand exchange reactions between hydrated H2O and Cl- via intramolecular vibrations. The magnitude of the Cu isotope fractionation among important Cu ligands was also estimated by ab initio methods. The magnitude of the nuclear field shift effect to the Cu isotope fractionation represents only ˜3% of the mass-dependent fractionation. The theoretical estimation was expanded to chlorides, hydroxides, sulfides, sulfates, and carbonates under different conditions of pH. Copper isotope fractionation of up to 2‰ is expected for different forms of Cu present in seawater and for different sediments (carbonates, hydroxides, and sulfides). We found that Cu in dissolved carbonates and sulfates is isotopically much heavier (+0.6‰) than free Cu. Isotope fractionation of Cu in hydroxide is minimal. The relevance of these new results to the understanding of metabolic processes was also discussed. Copper is an essential element used by a large number of proteins for electron transfer. Further theoretical estimates of δ65Cu in hydrated Cu(I) and Cu(II) ions, Cu(II) ascorbates, and Cu(II) oxalate predict Cu isotope fractionation during the breakdown of ascorbate into oxalate and account for the isotopically heavy Cu found in animal kidneys.

  20. Copper isotope effect in serum of cancer patients. A pilot study.

    Science.gov (United States)

    Télouk, Philippe; Puisieux, Alain; Fujii, Toshiyuki; Balter, Vincent; Bondanese, Victor P; Morel, Anne-Pierre; Clapisson, Gilles; Lamboux, Aline; Albarede, Francis

    2015-02-01

    The isotope effect describes mass-dependent variations of natural isotope abundances for a particular element. In this pilot study, we measured the (65)Cu/(63)Cu ratios in the serums of 20 breast and 8 colorectal cancer patients, which correspond to, respectively, 90 and 49 samples taken at different times with molecular biomarker documentation. Copper isotope compositions were determined by multiple-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). When compared with the literature data from a control group of 50 healthy blood donors, abundances of Cu isotopes predict mortality in the colorectal cancer group with a probability p = 0.018. For the breast cancer patients and the group of control women the probability goes down to p = 0.0006 and the AUC under the ROC curve is 0.75. Most patients considered in this preliminary study and with serum δ(65)Cu lower than the threshold value of -0.35‰ (per mil) did not survive. As a marker, a drop in δ(65)Cu precedes molecular biomarkers by several months. The observed decrease of δ(65)Cu in the serum of cancer patients is assigned to the extensive oxidative chelation of copper by cytosolic lactate. The potential of Cu isotope variability as a new diagnostic tool for breast and colorectal cancer seems strong. Shifts in Cu isotope compositions fingerprint cytosolic Cu chelation by lactate mono- and bidentates. This simple scheme provides a straightforward explanation for isotopically light Cu in the serum and isotopically heavy Cu in cancer cells: Cu(+) escaping chelation by lactate and excreted into the blood stream is isotopically light. Low δ(65)Cu values in serum therefore reveal the strength of lactate production by the Warburg effect.

  1. Copper speciation and isotopic fractionation in plants: uptake and translocation mechanisms.

    Science.gov (United States)

    Ryan, Brooke M; Kirby, Jason K; Degryse, Fien; Harris, Hugh; McLaughlin, Mike J; Scheiderich, Kathleen

    2013-07-01

    The fractionation of stable copper (Cu) isotopes during uptake into plant roots and translocation to shoots can provide information on Cu acquisition mechanisms. Isotope fractionation ((65) Cu/(63) Cu) and intact tissue speciation techniques (X-ray absorption spectroscopy, XAS) were used to examine the uptake, translocation and speciation of Cu in strategy I (tomato-Solanum lycopersicum) and strategy II (oat-Avena sativa) plant species. Plants were grown in controlled solution cultures, under varied iron (Fe) conditions, to test whether the stimulation of Fe-acquiring mechanisms can affect Cu uptake in plants. Isotopically light Cu was preferentially incorporated into tomatoes (Δ(65) Cu(whole plant-solution ) = c. -1‰), whereas oats showed minimal isotopic fractionation, with no effect of Fe supply in either species. The heavier isotope was preferentially translocated to shoots in tomato, whereas oat plants showed no significant fractionation during translocation. The majority of Cu in the roots and leaves of both species existed as sulfur-coordinated Cu(I) species resembling glutathione/cysteine-rich proteins. The presence of isotopically light Cu in tomatoes is attributed to a reductive uptake mechanism, and the isotopic shifts within various tissues are attributed to redox cycling during translocation. The lack of isotopic discrimination in oat plants suggests that Cu uptake and translocation are not redox selective.

  2. Nuclear Spectroscopy with Copper Isotopes of Extreme N/Z Ratios

    CERN Multimedia

    La commara, M; Roeckl, E; Van duppen, P L E; Schmidt, K A; Lettry, J

    2002-01-01

    The collaboration aims to obtain detailed nuclear spectroscopy information on isotopes close to the magic proton number Z=28 Very neutron-rich and neutron-deficient copper isotopes are ionized with the ISOLDE resonance ionization laser ion source (RILIS) to provide beams with low cross contamination.\\\\ \\\\On the neutron-deficient side the high $Q_\\beta$-values of $^{56}$Cu (15~MeV) and $^{57}$Cu (8.8~MeV) allow to study levels at high excitation energies in the doubly magic nucleus $^{56}$Ni and the neighbouring $^{57}$Ni. On the neutron-rich side the spectroscopy with separated copper isotopes allows presently the closest approach to the doubly magic $^{78}$Ni at an ISOL facility. Up to now no suitable target material with a rapid release was found for nickel itself. A slow release behaviour has to be assumed also for the chemically similar elements iron and cobalt.\\\\ \\\\Using a narrow-bandwidth dye laser and tuning of the laser frequency allows to scan the hyperfine splittings of the copper isotopes and isome...

  3. Isotopic tracing of ore-forming source materials for Dexing porphyry copper deposit of Jiangxi, China

    Institute of Scientific and Technical Information of China (English)

    Peng QIAN; Jianjun LU

    2008-01-01

    Dexing copper deposit is the biggest porphyry copper deposit in China. By researching isotopes of C,Si and Cu from the samples of Tongchang and Fujiawu ore-field, the authors found that δ13CPDB values of siderite were close to the δ13CPDB value of original magma; δ30Si values of the samples at the ore-forming stage were close to the δ30Si value range of magma, δ30Si values of partial samples were far away from it; Cu isotopic compositions of massive chalcopyrite formed at the early ore-forming stage are higher than that of veinal chalcopyrite formed at the later ore-forming stage. The results show that ore-forming materials were mainly derived from the porphyry body, and part of them were from wall rock materials.

  4. Chemical and isotopic provenance tracers in ancient copper and bronze artifacts: a geochemical database of copper mines

    Science.gov (United States)

    Giunti, I.; Artioli, G.; Giussani, B.; Marelli, M.; Recchia, S.; Angelini, I.; Baumgarten, B.; Omenetto, P.; Villa, I. M.

    2009-04-01

    The provenance of ore minerals used in prehistoric and historic times for copper smelting and extraction is one of the basic questions that archaeologists pose to modern analytical archaeometry [1]. To aid metal provenancing studies, a database of fully characterized Alpine copper mineralisations is being developed as the fundamental reference frame for metal extraction and diffusion in the past. In the early stages of the project, some of the most well known copper deposits in the Western Alps were selected and compared with very different minerogenetic deposits from the French Queyras (Saint Veran) and the Ligurian Apennines (Libiola, Monte Loreto). The fully characterized samples were then analysed by ICP-QMS (inductively coupled plasma-quadrupolar mass spectrometry). The abundances of about 60 minor and trace elements, including most transition metals and chalcophile elements, and the rare earths were measured in all samples. Furthermore, the feasibility of the routine reliable measurement of the 65Cu/63Cu isotope ratio [2] and its eventual use as a possible ore tracer was tested. Multicollector ICP-Mass Spectrometry was used to determine precise Pb isotopic ratios (206Pb/204Pb, 207Pb/204Pb, 208Pb/204Pb) and is being used for 65Cu/63Cu ratios as well. Advanced strategies based on multivariate analysis were then used to discriminate the ore mineral provenance. Data were treated with the chemometric software "The Unscrambler Version 9.5" (CAMO AS, Trondheim, Norway). Data pre-treatment, PCA [3] and PLS-DA [4,5] models were performed as implemented in the software. The availability of such unprecedented and complete amount of data of Alpine copper deposits also yields information relevant for the geochemical and minerogenetic intepretation of the deposits themselves. Application of PCA and PLS-DA to the geochemical and isotopic database proved to be a very powerful tool to discriminate the ore source areas with very little ambiguity. The applications to

  5. Copper and lead isotopic and metallic pollution record in soils from the Kombat mining area, Namibia

    Science.gov (United States)

    Mihaljevic, Martin; Ettler, Vojtech; Vanek, Ales; Chrastny, Vladislav; Kribek, Bohdan; Penizek, Vit; Sracek, Ondrej

    2013-04-01

    Copper (Cu) and lead (Pb) concentration, isotopic composition (206Pb/207Pb, 65Cu/63Cu) and speciation were studied in soils from the Kombat mining area. The Cu and Pb concentrations in the studied soils ranged between 21 mg/kg - 757 mg/kg, and 19 mg/kg - 815 mg/kg respectively. In the sequential extractions, the largest part of soil Cu appeared in the residual and reducible fractions and Pb was predominantly bound in reducible and residual fractions and was more mobile compared to Cu. Copper and Pb concentration are higher in soils close to the slime deposit. Concentration of both metals increased with increasing soil depth in irrigated and cultivated soils. In soils not contaminated by dust eroded from the slime deposit, Cu and Pb contents are not dependent on the soil depth. The Pb isotopic signatures (206Pb/207Pb) ranged between 1.15 - 1.21 in soils from the Kombat area. In most of soil samples, surface horizons exhibited lower 206Pb/207Pb ratio, which originates from the slime dust pollution (206Pb/207Pb ~ 1.15) compared to deeper soil horizons, with lithogenic Pb signatures (206Pb/207Pb > 1.2). Isotopic composition of Cu differs on contaminated and uncontaminated sites and cultivated and non-cultivated sites. The δ65Cu in the studied soil horizon ranged between -0.373 ‰ and 0.561 ‰. The most pronounced variations occurred in contaminated non cultivated and non-irrigated soils (0.529 ‰). The contaminated top horizons are enriched in isotopically heavier Cu (tailing materials), and δ65Cu decreased with depth. Irrigated (cultivated) and contaminated soils exhibited heavier Cu in the surface horizons (originated from tailing dust δ65Cu = 0.260), decrease of δ65Cu in Bt horizons (biological uptake of light isotope by crop, and their incorporation in this horizons) and increase of δ65Cu in Bc horizons. The Bc horizons of cultivated and irrigated Phaeozems are enriched in Mn nodules (0.2 - 1.5 cm diameter, prevailing Mn phase pyrochroite Mn(OH)2) which

  6. Uplift and submarine formation of some Melanesian porphyry copper deposits: Stable isotope evidence

    Science.gov (United States)

    Chivas, A.R.; O'Neil, J.R.; Katchan, G.

    1984-01-01

    Hydrogen and oxygen isotope analyses of sericites and kaolinites from four young porphyry copper deposits (Ok Tedi (1.2 Ma) and Yandera (6.5 Ma), Papua New Guinea; Koloula (1.5 Ma), Solomon Islands; and Waisoi (ocean water. For Ok Tedi, the non-magmatic component was a meteoric water with an isotopic composition different from that of the present meteoric water in the region. The isotopic signature of the former meteoric water is consistent with a surface elevation of 200 m a.s.l. or less at the time of mineralization. The deposit was later exposed and supergene kaolinitization commenced at approximately 1200 m a.s.l. Uplift and erosion has continued to the present at which time the elevation of the exposed deposit is 1800 m a.s.l. This rate of uplift is consistent with that known from other geological evidence. If the rate of uplift were approximately constant during the last 1.2 Ma, the age of supergene enrichment can be dated at approximately 0.4 Ma B.P. Similarly, influx of meteoric water at Yandera occurred when the ground surface above the deposit was at an elevation of approximately 600 m a.s.l. The deposit's present elevation is 1600 m a.s.l. In this case a total uplift of approximately 2.2 km is indicated, with removal of 1.2 km of overburden by erosion. ?? 1984.

  7. Fluid inclusion and isotope geochemistry of the Yangla copper deposit, Yunnan, China

    Science.gov (United States)

    Yang, Xi-An; Liu, Jia-Jun; Yang, Long-Bo; Han, Si-Yu; Sun, Xiao-Ming; Wang, Huan

    2014-04-01

    The Yangla copper deposit, with Cu reserves of 1.2 Mt, is located between a series of thrust faults in the Jinshajiang-Lancangjiang-Nujiang region, Yunnan, China, and has been mined since 2007. Fluid inclusion trapping conditions ranged from 1.32 to 2.10 kbar at 373-409 °C. Laser Raman spectroscopy confirms that the vapour phase in these inclusions consists of CO2, CH4, N2 and H2O. The gas phases in the inclusions are H2O and CO2, with minor amounts of N2, O2, CO, CH4, C2H2, C2H4, and C2H6. Within the liquid phase, the main cations are Ca2+ and Na+ while the main anions are SO4 2- and Cl-. The oxygen and hydrogen isotope compositions of the ore-forming fluids (-3.05‰ ≤ δ18OH2O ≤ 2.5‰; -100‰ ≤ δD ≤ -120‰) indicate that they were derived from magma and evolved by mixing with local meteoric water. The δ34S values of sulfides range from -4.20‰ to 1.85‰(average on -0.85‰), supporting a magmatic origin. Five molybdenite samples taken from the copper deposit yield a well-constrained 187Re-187Os isochron age of 232.8 ± 2.4 Ma. Given that the Yangla granodiorite formed between 235.6 ± 1.2 Ma and 234.1 ± 1.2 Ma, the Cu metallogenesis is slightly younger than the crystallization age of the parent magma. A tectonic model that combines hydrothermal fluid flow and isotope compositions is proposed to explain the formation of the Yangla copper deposit. At first, westward subduction of the Jinshajiang Oceanic Plate in the Early Permian resulted in the development of a series of thrust faults. This was accompanied by fractional melting beneath the overriding plate, triggering magma ascent and extensive volcanism. The thrust faults, which were then placed under tension during a change in tectonic mode from compression to extension in the Late Triassic, formed favorable pathways for the magmatic ore-forming fluids. These fluids precipitated copper-sulfides to form the Yangla deposit.

  8. Copper isotope fractionation during surface adsorption and intracellular incorporation by bacteria.

    Science.gov (United States)

    Navarrete, Jesica U; Borrok, David M; Viveros, Marian; Ellzey, Joanne T

    2011-02-01

    Copper isotopes may prove to be a useful tool for investigating bacteria-metal interactions recorded in natural waters, soils, and rocks. However, experimental data which attempt to constrain Cu isotope fractionation in biologic systems are limited and unclear. In this study, we utilized Cu isotopes (δ(65)Cu) to investigate Cu-bacteria interactions, including surface adsorption and intracellular incorporation. Experiments were conducted with individual representative species of Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacteria, as well as with wild-type consortia of microorganisms from several natural environments. Ph-dependent adsorption experiments were conducted with live and dead cells over the pH range 2.5-6. Surface adsorption experiments of Cu onto live bacterial cells resulted in apparent separation factors (Δ(65)Cu(solution-solid) = δ(65)Cu(solution) - δ(65)Cu(solid)) ranging from +0.3‰ to +1.4‰ for B. subtilis and +0.2‰ to +2.6‰ for E. coli. However, because heat-killed bacterial cells did not exhibit this behavior, the preference of the lighter Cu isotope by the cells is probably not related to reversible surface adsorption, but instead is a metabolically-driven phenomenon. Adsorption experiments with heat-killed cells yielded apparent separation factors ranging from +0.3‰ to -0.69‰ which likely reflects fractionation from complexation with organic acid surface functional group sites. For intracellular incorporation experiments the lab strains and natural consortia preferentially incorporated the lighter Cu isotope with an apparent Δ(65)Cu(solution-solid) ranging from ~+1.0‰ to +4.4‰. Our results indicate that live bacterial cells preferentially sequester the lighter Cu isotope regardless of the experimental conditions. The fractionation mechanisms involved are likely related to active cellular transport and regulation, including the reduction of Cu(II) to Cu(I). Because similar intracellular Cu

  9. Isotope Geochemistry of the Dongchuan Copper Deposit,Yunnan,SW China: Stratigraphic Chronology and Application of Lead Isotopes in Geochemical Exploration

    Institute of Scientific and Technical Information of China (English)

    常向阳; 朱炳泉

    2002-01-01

    In this paper the Pb-Pb isochron method was used to determine the isotopic ages of te Luoxue Formation dolomites(1716±56Ma),th Heishan Formation carbonaceous slated (1607±128Ma) of the middle sub-group of the Kunyang Group and the Dayingpan Formation carbonaceous slates(1258±Ma) of the upper sub-group of the Kunyang Group.The age of the middle sub-group of the Kunyang Group is about 1800-1600Ma,belonging to the Late Paleo-Proterozoic,and that of the Dayingpan Formation in the upper sub-group of the Kunyang Group is about 1200-1300Ma, belonging to the Middle Poroterozoic.In addition,the Pb isotope chemical exploration techniques were used to study systematically the Pb isotopic compositions of rocks and ores across the No.14 vein in the middle segment of the No.1 pit of the Tangdan copper deposit and the result showed that the Pb isotope V1 values are neatively correlated with the copper contents.In is the first trial to use the systematic section method to conduct Pb isotope chemical exploration.

  10. Isotope Geochemistry of the Dongchuan Copper Deposit, Yunnan, SW China:Stratigraphic Chronology and Application of Lead Isotopes in Geochemical Exploration

    Institute of Scientific and Technical Information of China (English)

    常向阳; 朱炳泉

    2002-01-01

    In this paper the Pb-Pb isochron method was used to determine the isotopic ages of the Luoxue Formation dolomites (1716 ± 56 Ma), the Heishan Formation carbonaceous slates(1607 ± 128 Ma) of the middle sub-group of the Kunyang Group and the Dayingpan Formation carbonaceous slates ( 1258 ± 70Ma) of the upper sub-group of the Kunyang Group. The age of the middle sub-group of the Kunyang Group is about 1800 - 1600 Ma, belonging to the Late Paleo-Proterozoic, and that of the Dayingpan Formation in the upper sub-group of the Kunyang Group is about 1200 - 1300 Ma, belonging to the Middle Proterozoic. In addition, the Pb isotope chemical exploration techniques were used to study systematically the Pb isotopic compositions of rocks and ores across the No. 14 vein in the middle segment of the No. 1 pit of the Tangdan copper deposit and the result showed that the Pb isotope V1 values are negatively correlated with the copper contents. It is the first trial to use the systematic section method to conduct Pb isotope chemical exploration.

  11. Mineralization and leaching process in the Jian copper deposit, northeastern Fars province: Application of petrography and stable isotopes

    Directory of Open Access Journals (Sweden)

    Farid Moore

    2015-04-01

    Full Text Available Introduction One of the first principles in the formation of a reserve is mineralogical, construction and mineral textures studies and investigation of paragenetic relations in the ore minerals. In addition, to petrographic studies, isotopic investigates have wide applications in economic geology. In general, copper isotope variability in primary (high temperature mineralization forms a tight cluster, in contrast to secondary mineralization, which has a much larger isotope range. A distinct pattern of heavier copper isotope signatures is evident in supergene samples, and a lighter signature characterizes the leached cap and oxidation-zone minerals. This relationship has been used to understand oxidation–reduction processes (Hoefs, 2009. Also for a better understanding of the origin of the Jian Cu deposit, this research focuses on the origin and composition of the fluid and elucidation of its evolution during the mineralization process. In order to achieve this end, field observations, vein petrography, microthermometry of fluid inclusions and stable isotope analyses of veins and minerals were investigated. The present study also compares high and low temperature sulfide samples in an attempt to document and explain diagnostic δ65Cu ranges in minerals from the Jian deposit. Materials and methods The samples were taken from different depths to measure Cu isotope variations within each reservoir. Mineralogical composition was determined using X-ray diffractometry. In addition, chromatographic separation was carried out on all samples (except for native Cu samples in a clean lab and was conducted as outlined in Mathur et al. (Mathur et al., 2009. These samples were measured into a Multicollector Inductively-Coupled-Plasma Mass Spectrometer (MC-ICPMS, the Micro mass Isoprobe at the University of Arizona in low resolution mode using a microconcentric nebulizer to increase sensitivity for the samples with lower concentrations of copper. Preparation

  12. Origin of native copper in the Paraná volcanic province, Brazil, integrating Cu stable isotopes in a multi-analytical approach

    Science.gov (United States)

    Baggio, Sérgio Benjamin; Hartmann, Léo Afraneo; Lazarov, Marina; Massonne, Hans-Joachim; Opitz, Joachim; Theye, Thomas; Viefhaus, Tillmann

    2017-06-01

    Different hypotheses exist on the origin of native copper mineralization in the Paraná volcanic province that invoke magmatic, late magmatic, or hydrothermal events. The average copper content in the host basalts is 200 ppm. Native copper occurs as dendrites in cooling joints, fractures, and cavities within amygdaloidal crusts. Cuprite, tenorite, chrysocolla, malachite, and azurite occur in breccias at the top of the lava flows. Chemical analyses, X-ray diffraction, Raman spectrometry, electron microprobe analyses, LA-ICP-MS, and Cu isotope analyses were used to evaluate the origin of native copper in the volcanic province. Copper contents in magnetite of the host basalt are close to 1 wt.%, whereas clinopyroxene contains up to 0.04 wt.% Cu. Cretaceous hydrothermal alteration of magnetite and clinopyroxene released copper to generate hydrothermal copper mineralization. The isotopic composition of the native copper in the Paraná volcanic province varies from -0.9‰ in the southeastern portion (Rio Grande do Sul state) to 1.9‰ in the central portion (Paraná state) of the province. This study supports a hydrothermal origin followed by supergene enrichment for native copper in the Paraná volcanic province.

  13. Geochemistry and S, Pb isotope of the Yangla copper deposit, western Yunnan, China: Implication for ore genesis

    Science.gov (United States)

    Yang, Xi-An; Liu, Jia-Jun; Cao, Ye; Han, Si-Yu; Gao, Bing-yu; Wang, Huan; Liu, Yue-Dong

    2012-07-01

    The Yangla copper deposit, situated in the middle section of Jinshajiang tectonic belt between Zhongza-Zhongdian block and Changdu-Simao block, is a representative and giant copper deposit that has been discovered in Jinshajiang-Lancangjiang-Nujiang region in recent years. There are coupled relationships between Yangla granodiorite and copper mineralization in the Yangla copper deposit. Five molybdenite samples yielded a well-constrained 187Re-187Os isochron age of 233.3 ± 3 Ma, the metallogenesis is therefore slightly younger than the crystallization age of the granodiorite. S, Pb isotopic compositions of the Yangla copper deposit indicate that the ore-forming materials were derived from the mixture of upper crust and mantle, also with the magmatic contributions. In the late Early Permian, the Jinshajiang Oceanic plate was subducted to the west, resulting in the formation of a series of gently dipping thrust faults in the Jinshajiang tectonic belt, meanwhile, accompanied magmatic activities. In the early Late Triassic, which was a time of transition from collision-related compression to extension in the Jinshajiang tectonic belt, the thrust faults were tensional; it would have been a favorable environment for forming ore fluids. The ascending magma provided a channel for the ore-forming fluid from the mantle wedge. After the magma arrived at the base of the early-stage Yangla granodiorite, the platy granodiorite at the base of the body would have shielded the late-stage magma from the fluid. The magma would have cooled slowly, and some of the ore-forming fluid in the magma would have entered the gently dipping thrust faults near the Yangla granodiorite, resulting in mineralization.

  14. A reconnaissance of the Cu isotopic compositions of hydrothermal vein-type cop-per deposit, Jinman, Yunnan,China

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The Jinman deposit is a low-temperature hydrothermal vein-type copper deposit, which occurs along faults and fractures within Middle Jurassic sandstone and mudstone units of the Lanping-Simao Mesozoic-Cenozoic basin of Yunnan Province. In this note, we report for the first time the Cu isotopic compositions of Cu-sulfides from the Jinman deposit. The data show large variations and low 65Cu values of 3.70‰ to +0.30‰, which are in sharp contrast to the 65Cu values of high-temperature magmatic-hydrothermal copper deposits (0.62‰ to +0.40‰) and the modern ocean-floor massive sulfide deposits (0.48‰ to +1.15‰). It is suggested that the Cu isotope fractionation at Jinman is affected mainly by the following factors, i.e. a low temperature of ore formation (150-286℃); a sedimentary source for ore materials; various stages of ore deposition; and involvement of organic matter in the ore-forming processes.

  15. The oxygen isotope effect on critical temperature in superconducting copper oxides

    OpenAIRE

    Mourachkine, A.

    2003-01-01

    The isotope effect provided a crucial key to the development of the BCS (Bardeen-Cooper-Schrieffer) microscopic theory of superconductivity for conventional superconductors. In superconducting cooper oxides (cuprates) showing an unconventional type of superconductivity, the oxygen isotope effect is very peculiar: the exponential coefficient strongly depends on doping level. No consensus has been reached so far on the origin of the isotope effect in the cuprates. Here we show that the oxygen i...

  16. Characterization of fluid inclusions and sulfur isotopes in the Iju porphyry copper deposit, North West of Shahr-e-Babak

    Directory of Open Access Journals (Sweden)

    Malihe Golestani

    2017-07-01

    Full Text Available Introduction The Iju porphyry copper deposit is located in the southern part of the Urumieh-Dokhtar magmatic arc (Dehaj-Sarduieh belt within the Kerman copper belt (Dimitrijevic, 1973. The Porphyry Copper mineralization in the Iranian plate occurs dominantly along the Urumieh-Dokhtar arc, which has resulted from the subduction of the Arabian plate beneath the central Iran and the closure of the Neo-Tethys Ocean during the Alpine orogeny (Hassanzadeh, 1993. The Iju porphyry copper deposit with 25 million tons of ore reserves is one of the main copper deposits within the Kerman copper belt. The mining area is composed of upper Miocene volcanic and subvolcanic rocks (mineralized and barren subvolcanic rocks and quaternary deposits. Two hydrothermal alteration zones of quartz-sericite-pyrite and propylitic zones can be identified in the Iju area. The copper mineralization in the Iju deposit occurs as disseminated, stockwork and hydrothermal breccia. In the hypogene zone, the mineral paragenesis include chalcopyrite, pyrite, with minor occurrences of bornite and magnetite. This paper reports geological, mineralogical, fluid inclusion and S isotope data from the Iju deposit in order to investigate ore-bearing fluids’ characteristics and the mechanisms of ore deposition. Materials and methods Fifteen samples of syngenetic quartz+pyrite bearing veinlets within the quartz-sericite-pyrite zone were selected from different depths across the seven boreholes. Quartz was used for double-polished thin sections and pyrite was used for sulfur isotope analysis. Fluid inclusion studies were performed using the Linkam cooling and heating stage, the THMSG 600 model. The syngenetic pyrite with thermometry quartz sample was used for the sulfur isotope experiments. Stable isotope analysis was performed at the Hatch Stable Isotope Laboratory in the University of Ottawa, Canada. Results The fluid inclusions of the Iju deposit represent a wide range in the

  17. Copper isotope fractionation during its interaction with soil and aquatic microorganisms and metal oxy(hydr)oxides: Possible structural control

    Science.gov (United States)

    Pokrovsky, O. S.; Viers, J.; Emnova, E. E.; Kompantseva, E. I.; Freydier, R.

    2008-04-01

    This work is aimed at quantifying the main environmental factors controlling isotope fractionation of Cu during its adsorption from aqueous solutions onto common organic (bacteria, algae) and inorganic (oxy(hydr)oxide) surfaces. Adsorption of Cu on aerobic rhizospheric ( Pseudomonas aureofaciens CNMN PsB-03) and phototrophic aquatic ( Rhodobacter sp. f-7bl, Gloeocapsa sp. f-6gl) bacteria, uptake of Cu by marine ( Skeletonema costatum) and freshwater ( Navicula minima, Achnanthidium minutissimum and Melosira varians) diatoms, and Cu adsorption onto goethite (FeOOH) and gibbsite (AlOOH) were studied using a batch reaction as a function of pH, copper concentration in solution and time of exposure. Stable isotopes of copper in selected filtrates were measured using Neptune multicollector ICP-MS. Irreversible incorporation of Cu in cultured diatom cells at pH 7.5-8.0 did not produce any isotopic shift between the cell and solution (Δ 65/63Cu(solid-solution)) within ±0.2‰. Accordingly, no systematic variation was observed during Cu adsorption on anoxygenic phototrophic bacteria ( Rhodobacter sp.), cyanobacteria ( Gloeocapsa sp.) or soil aerobic exopolysaccharide (EPS)-producing bacteria ( P. aureofaciens) in circumneutral pH (4-6.5) and various exposure times (3 min to 48 h): Δ 65Cu(solid-solution) = 0.0 ± 0.4‰. In contrast, when Cu was adsorbed at pH 1.8-3.5 on the cell surface of soil the bacterium P. aureofacienshaving abundant or poor EPS depending on medium composition, yielded a significant enrichment of the cell surface in the light isotope (Δ 65Cu (solid-solution) = -1.2 ± 0.5‰). Inorganic reactions of Cu adsorption at pH 4-6 produced the opposite isotopic offset: enrichment of the oxy(hydr)oxide surface in the heavy isotope with Δ 65Cu(solid-solution) equals 1.0 ± 0.25‰ and 0.78 ± 0.2‰ for gibbsite and goethite, respectively. The last result corroborates the recent works of Mathur et al. [Mathur R., Ruiz J., Titley S., Liermann L., Buss H. and

  18. Production of neutron-rich copper isotopes in 30-MeV proton-induced fission of sup 2 sup 3 sup 8 U

    CERN Document Server

    Kruglov, K; Bruyneel, B; Dean, S S; Franchoo, S; Huyse, M; Kudryavtsev, Y; Müller, W F; Prasad, N V S; Raabe, R; Reusen, I; Schmidt, K H; Van De Vel, K; Van Duppen, P; Van Roosbroeck, J; Weissman, L

    2002-01-01

    The neutron-rich isotopes sup 7 sup 0 sup - sup 7 sup 6 Cu have been produced in 30-MeV proton-induced fission of sup 2 sup 3 sup 8 U using the Ion Guide Laser Ion Source (IGLIS) at LISOL. The production rates of the copper isotopes, and of the nickel and cobalt isotopes that were measured earlier, are compared to cross section calculations. Based on these new results an estimate for the cross section of sup 7 sup 8 Ni is given.

  19. Copper isotope behavior during extreme magma differentiation and degassing: a case study on Laacher See phonolite tephra (East Eifel, Germany)

    Science.gov (United States)

    Huang, Jian; Liu, Sheng-Ao; Wörner, Gerhard; Yu, Huimin; Xiao, Yilin

    2016-09-01

    Copper (Cu) isotopic analyses were performed on a set of samples from the Laacher See tephra (LST) (Eifel, Germany) to investigate whether Cu isotopes are fractionated during extreme magma differentiation and degassing. The LST represents a continuous fractional crystallization series from parental basanite through mafic to highly differentiated phonolites. Samples analyzed here include phonolites of variable degrees of differentiation, phonolite-basanite hybrid rocks formed by mixing basanite and phonolite magmas, and basanite-derived mega-crystals (i.e., clinopyroxene, amphibole, phlogopite). In addition, we analyzed a series of mafic parental lavas from surrounding volcanic centers to constrain the Cu isotopic features of the Eifel mantle. Mafic phonolites show strong depletion in Cu compared to their parental basanites from ~50 to ~3 ppm, indicating sulfide fractionation during the basanite-to-phonolite differentiation. Mass balance calculations, based on the most Cu-rich hybrid rock (δ65Cu = -0.21 ‰, [Cu] = 46.2 ppm), show that the parental basanite magmas have δ65Cu of ca. -0.21 ‰, lighter than those of the mafic phonolites (~0.11 ‰). This suggests that sulfide fractionation preferentially removes the lighter Cu isotope (63Cu) in S-saturated magmas. By contrast, all phonolites have a limited range of Cu contents (1.1 to 4.0 ppm) with no systematic variations with S, suggesting that Cu is not controlled by sulfide fractionation during the evolution of mafic to highly differentiated phonolites. The identical δ65Cu values (0.11 ± 0.03 ‰, 2SD, n = 10) of the phonolites, irrespective of highly diverse composition and extents of differentiation, indicate that fractional crystallization of silicates (e.g., plagioclase, sanidine, amphibole, pyroxene, olivine), Fe-Ti-oxides and phosphate (e.g., apatite) generates insignificant Cu isotope fractionation. The lack of correlations between δ65Cu and volatile contents (e.g., S, Cl) in the LST sequence implies

  20. Geochronology and isotope geochemistry of the Baogutu porphyry copper deposit in the West Junggar region, Xinjiang, China

    Science.gov (United States)

    Shen, Ping; Shen, Yuanchao; Pan, Hongdi; Li, Xian-hua; Dong, Lianhui; Wang, Jingbin; Zhu, Heping; Dai, Huawu; Guan, Weina

    2012-04-01

    The Baogutu copper deposit, a newly-discovered middle-sized porphyry copper deposit, is located in the West Junggar region of Xinjiang, NW China. Baogutu is associated with a Late Carboniferous intrusive complex that was emplaced into Lower Carboniferous volcano-sedimentary strata. The intrusive complex comprises main-stage diorites and minor late-stage diorite porphyries. Their intrusive activity occurred in 313.0 ± 2.2 Ma to 312.3 ± 2.2 Ma based on U-Pb zircon SIMS analyses. Molybdenite separated from ore-bearing quartz veins yields Re-Os model ages from 309.4 ± 4.4 Ma to 314.1 ± 4.5 Ma with a weighted mean age of 312.4 ± 1.8 Ma. Biotites, separated from fresh diorite and hydrothermal breccias in main-stage diorites, yield 40Ar/39Ar plateau ages of 308.26 ± 1.88 and 305.69 ± 1.76 Ma, respectively. These dates obtained from three independent dating techniques constrain the ore-forming age of the Baogutu deposit. Stable isotopes (H, O, S) and radiogenic isotope (Pb) have been used to discriminate the sources of the ore-forming fluid at Baogutu. The δ18O (1.14-1.74‰) and δD (-74‰ to -98‰) data indicate that the water of the ore-forming fluids was derived from magmatic water. The δ34S values (-0.24‰ to +0.4‰) show that the sulfur isotope composition of the ore fluids is characterized by magma sulfur. Lead isotope compositions (206Pb/204Pb = 17.92-18.89, 207Pb/204Pb = 15.45-15.62, 208Pb/204Pb = 37.68-38.36) indicate that the lead of the ore fluids is derived from the mantle. These data confirm the occurrence of a Cu-Au-Mo mineralizing event at Late Carboniferous in the Baogutu region and the ore-forming fluids are mainly derived from the mantle. The event is inferred to be associated with Late Carboniferous Junggar oceanic crust subduction.

  1. [High-precision in situ analysis of the lead isotopic composition in copper using femtosecond laser ablation MC-ICP-MS and the application in ancient coins].

    Science.gov (United States)

    Chen, Kai-Yun; Fan, Chao; Yuan, Hong-Lin; Bao, Zhi-An; Zong, Chun-Lei; Dai, Meng-Ning; Ling, Xue; Yang, Ying

    2013-05-01

    In the present study we set up a femtosecond laser ablation MC-ICP-MS method for lead isotopic analysis. Pb isotopic composition of fifteen copper (brass, bronze) standard samples from the National Institute of Standards Material were analyzed using the solution method (MC-ICP-MS) and laser method (fLA-MC-ICPMS) respectively, the results showed that the Pb isotopic composition in CuPb12 (GBW02137) is very homogeneous, and can be used as external reference material for Pb isotopic in situ analysis. On CuPb12 112 fLA-MC-ICPMS Pb isotope analysis, the weighted average values of the Pb isotopic ratio are in good agreement with the results analyzed by bulk solution method within 2sigma error, the internal precision RSEs of the 208 Pb/204 Pb ratio and 207 Pb/206 Pb ratio are less than 90 and 40 ppm respectively, and the external precision RSDs of them are less than 60 and 30 ppm respectively. Pb isotope of thirteen ancient bronze coins was analyzed via fLA-MC-ICPMS, the results showed that the Pb isotopic composition of ancient coins of different dynasties is significantly different, and not all the Pb isotopic compositions in the coins even from the same dynasty are in agreement with each other.

  2. Online determination of copper in aluminum alloy by microchip solvent extraction using isotope dilution ICP-MS method.

    Science.gov (United States)

    Kagawa, Tsuyoshi; Ohno, Masashi; Seki, Tatsuya; Chikama, Katsumi

    2009-09-15

    Isotope dilution mass spectroscopy (IDMS)/ICP-MS combined with microchip solvent extraction was successfully applied for the online determination of copper in an aluminum alloy. The microchip solvent extraction was developed for the separation of Cu from major element, and optimal pH range was wider than that of the batchwise extraction method. The dimensions of the microchip were 30 mm x 70 mm and that of micro-channel on the microchip was 180 microm wide and 40 microm deep. The copper complex with 8-hydroxyquinoline was extracted into o-xylene at pH 5.5 and back extracted with 0.1 mol l(-1) nitric acid at flow rate of 20 microl min(-1). The total extraction efficiency (water/organic solvent/nitric acid) was around 40%. IDMS/ICP-MS was coupled with solvent extraction for precise determination of Cu. The extraction and back-extraction on the microchip took about 1s and the total measurement time for the IDMS/ICP-MS was about 40s/sample. The blank value of this method was 0.1 ng g(-1). The proposed method was used for the determination of Cu in Al standard materials (JSAC 0121-C, The Japan Society for Analytical Chemistry and 7074 Al alloy, Nippon Light Metal Co. Ltd.). The obtained analytical results are in good agreement with the certified values.

  3. Separation of copper, iron, and zinc from complex aqueous solutions for isotopic measurement

    Science.gov (United States)

    Borrok, D.M.; Wanty, R.B.; Ridley, W.I.; Wolf, R.; Lamothe, P.J.; Adams, M.

    2007-01-01

    The measurement of Cu, Fe, and Zn isotopes in natural samples may provide valuable information about biogeochemical processes in the environment. However, the widespread application of stable Cu, Fe, and Zn isotope chemistry to natural water systems remains limited by our ability to efficiently separate these trace elements from the greater concentrations of matrix elements. In this study, we present a new method for the isolation of Cu, Fe, and Zn from complex aqueous solutions using a single anion-exchange column with hydrochloric acid media. Using this method we are able to quantitatively separate Cu, Fe, and Zn from each other and from matrix elements in a single column elution. Elution of the elements of interest, as well as all other elements, through the anion-exchange column is a function of the speciation of each element in the various concentrations of HCl. We highlight the column chemistry by comparing our observations with published studies that have investigated the speciation of Cu, Fe, and Zn in chloride solutions. The functionality of the column procedure was tested by measuring Cu, Fe, and Zn isotopes in a variety of stream water samples impacted by acid mine drainage. The accuracy and precision of Zn isotopic measurements was tested by doping Zn-free stream water with the Zn isotopic standard. The reproducibility of the entire column separation process and the overall precision of the isotopic measurements were also evaluated. The isotopic results demonstrate that the Cu, Fe, and Zn column separates from the tested stream waters are of sufficient purity to be analyzed directly using a multicollector inductively coupled plasma mass spectrometer (MC-ICP-MS), and that the measurements are fully-reproducible, accurate, and precise. Although limited in scope, these isotopic measurements reveal significant variations in ??65Cu (- 1.41 to + 0.30???), ??56Fe (- 0.56 to + 0.34???), and ??66Zn (0.31 to 0.49???) among samples collected from different

  4. Iron and copper isotope fractionation during filtration and ultrafiltration of boreal organic-rich waters

    Science.gov (United States)

    Ilina, Svetlana M.; Viers, Jerome; Pokrovsky, Oleg S.; Poitrasson, Franck; Lapitsky, Sergey A.; Alekhin, Yuriy V.

    2010-05-01

    Typical feature of all boreal surface waters is high concentration of dissolved (complexes. Organic and organo-mineral colloids are the most likely carriers of trace metals such as Cu in rivers of the boreal zone. This work addresses colloidal speciation of Cu and Fe using conventional size separation technique, on-site frontal ultrafiltration. Specifically, we aimed to test the possibility of the presence of different pools of metal having specific isotopic signatures in different colloidal fractions using stable isotope measurements. We have chosen Cu for its high affinity to colloidal DOM and Fe for its tendency to form stable organo-mineral colloids of various size. Samples of natural waters were collected from small rivers, lakes, bogs, groundwater and soil environments in the Northern Karelia (NW Russia) during summer baseflow period. Large volumes (20-40 L) of water were filtered in the field through progressively decreasing pore size filters: 20, 10, 5, 0.8, 0.45, 0.22, 0.1 µm and 100, 10 and 1 kDa (1 kDa ~ 1 nm) using nylon and regenerated cellulose membranes and frontal ultrafiltration (Millipore, Amicon) devises. The homogeneity of the sample was verified by tracing radiogenic Sr isotopes in each fraction. In all filtrates and ultrafiltrates (permeates), and in selected retentates, stable isotopic composition of Cu and Fe was measured using double focusing high resolution MC-ICP MS (Neptune). We observe rather constant Cu isotopic ratio in all filtrate series and a systematic enrichment of heavy isotope of Fe with decreasing poresize. These preliminary results can be explained by strong complexation of Cu with small-size organic ligands of fulvic nature and its partial association with organo-mineral colloids. Both Fe(III) - OM complxeation and Fe(III) oxyhydroxides precipitation can be invoked to explain Fe isotope fractionation. This work allows, for the first, time, multi-isotopic approach to trace the origin of colloids in surficial waters and it

  5. Origin and fate of copper in a small Mediterranean vineyard catchment: New insights from combined chemical extraction and δ{sup 65}Cu isotopic composition

    Energy Technology Data Exchange (ETDEWEB)

    El Azzi, D. [Université de Toulouse (France); INPT, UPS (France); Laboratoire Ecologie Fonctionnelle et Environnement (ECOLAB), ENSAT, Avenue de l' Agrobiopole, 31326 Castanet Tolosan Cedex (France); CNRS (France); ECOLAB, ENSAT, Avenue de l' Agrobiopole, 31326 Castanet Tolosan Cedex (France); Viers, J. [Université de Toulouse (France); UPS, Géosciences Environnement Toulouse (GET), 14, avenue Édouard Belin, Toulouse31400 (France); CNRS, IRD, CNES (France); GET, 14, avenue Édouard Belin, Toulouse 31400 (France); Guiresse, M.; Probst, A. [Université de Toulouse (France); INPT, UPS (France); Laboratoire Ecologie Fonctionnelle et Environnement (ECOLAB), ENSAT, Avenue de l' Agrobiopole, 31326 Castanet Tolosan Cedex (France); CNRS (France); ECOLAB, ENSAT, Avenue de l' Agrobiopole, 31326 Castanet Tolosan Cedex (France); Aubert, D. [Université de Perpignan Via Domitia, CEntre de Formation et de Recherche sur les Environnements Méditérranéens (CEFREM), UMR 5110, F-66860, Perpignan (France); CNRS, CEFREM, UMR 5110, F-66860, Perpignan (France); Caparros, J.; Charles, F.; Guizien, K. [CNRS, FRE 3350, LECOB, Observatoire Océanologique, F-66651 Banyuls/mer (France); UPMC Université Paris 6, FRE 3350, LECOB, Observatoire Océanologique, F-66651 Banyuls/mer (France); Probst, J.L., E-mail: jean-luc.probst@ensat.fr [Université de Toulouse (France); INPT, UPS (France); Laboratoire Ecologie Fonctionnelle et Environnement (ECOLAB), ENSAT, Avenue de l' Agrobiopole, 31326 Castanet Tolosan Cedex (France); CNRS (France); ECOLAB, ENSAT, Avenue de l' Agrobiopole, 31326 Castanet Tolosan Cedex (France)

    2013-10-01

    For centuries, many Mediterranean catchments were covered with vineyards in which copper was widely applied to protect grapevines against fungus. In the Mediterranean-type flow regime, brief and intense flood events increase the stream water discharge by up to 10 times and cause soil leaching and storm runoff. Because vineyards are primarily cultivated on steep slopes, high Cu fluxes are discharged by surface water runoff into the rivers. The purpose of this work was to investigate the riverine behavior and transport of anthropogenic Cu by coupling a sequential chemical extraction (SCE) procedure, used to determine Cu partitioning between residual and non-residual fractions, with δ{sup 65}Cu isotopic measurements in each fraction. In the Baillaury catchment, France, we sampled soils (cultivated and abandoned), river bed sediments (BS), suspended particulate matter (SPM), and river water during the flash flood event of February 2009. Copper partitioning using SCE show that most of Cu in abandoned vineyard soil was in the residual phase (> 60%) whereas in cultivated soil, BS and SPM, Cu was mostly (> 25%) in non-residual fractions, mainly adsorbed onto iron oxide fractions. A small fraction of Cu was associated with organic matter (5 to 10%). Calculated enrichment factors (EF) are higher than 2 and the anthropogenic contribution was estimated between 50 to 85%. Values for δ{sup 65}Cu in bulk samples were similar to bedrock therefore; δ{sup 65}Cu on SCE fractions of superficial soils and SPM allowed for discrimination between Cu origin and distribution. Copper in residual fractions was of natural mineral origin (δ{sup 65}Cu close to local bedrock, + 0.07‰). Copper in water soluble fraction of SPM (δ{sup 65}Cu = + 0.26‰) was similar to dissolved river Cu (δ{sup 65}Cu = + 0.31‰). Copper from fungicide treatment (δ{sup 65}Cu = − 0.35‰) was bound to organic matter (δ{sup 65}Cu = − 0.20‰) without or with slight isotopic fractioning. A preferential

  6. Lead isotopic composition and lead source of the Tongchanghe basalt-type native copper-chalcocite deposit in Ninglang, western Yunnan, China

    Institute of Scientific and Technical Information of China (English)

    ZHANG Qian; ZHU Xiaoqing; ZHANG Zhengwei

    2006-01-01

    The Tongchanghe native copper-chalcocite deposit at Ninglang occurs in low-Ti basalts of western Yunnan, and the mode of fault-filling & metasomatism metallogenesis indicates that this deposit is of late-stage hydrothermal origin. This makes it more complicated to define the source of ore-forming materials. This paper introduces the Pb isotope data of Himalayan alkali-rich porphyries, regional Early-Middle Proterozoic metamorphic rock basement and various types of rocks of the mining district in western Yunnan with an attempt to constrain the origin of the Tongchanghe native copper-chalcocite deposit at Ninglang.The results showed that the ores are relatively homogeneous in Pb isotopic composition, implying a simple ore-forming material source. The three sets of Pb isotopic ratios in the Himalayan alkali-rich porphyries are all higher than those of the ores; the regional basement metamorphic rocks show a wide range of variations in Pb isotopic ratio, quite different from the isotopic composition of ore lead; the Pb isotopic composition of the Triassic sedimentary rocks and mudstone and siltstone interbeds in the Late Permian Heinishao Formation (corresponding to the forth cycle of basaltic eruption) in the mining district has the characteristics of radiogenic lead and is significantly different from the isotopic composition of ore lead; like the ores, the Emeishan basalts in the mining district and those regionally distributed possess the same Pb isotopic composition, showing a complete overlap with respect to their distribution range. From the above, the possibilities can be ruled out that the ore-forming materials of the Tongchanghe deposit were derived from the basement, a variety of Himalayan magmatic activities, etc. It is thereby defined that the ore-forming materials were derived largely from the Emeishan basalts. From the data available it is deduced that the native cupper-chalcocite-type metallogenesis that occurred in the Emeishan basalt-distributed area

  7. Mineralogic, fluid inclusion, and sulfur isotope evidence for the genesis of Sechangi lead-zinc (-copper) deposit, Eastern Iran

    Science.gov (United States)

    Malekzadeh Shafaroudi, Azadeh; Karimpour, Mohammad Hassan

    2015-07-01

    The Sechangi lead-zinc (-copper) deposit lies in the Lut block metallogenic province of Eastern Iran. This deposit consists of ore-bearing vein emplaced along fault zone and hosted by Late Eocene monzonite porphyry. Hydrothermal alteration minerals developed in the wall rock include quartz, kaolinite, illite, and calcite. Microscopic studies reveal that the vein contains galena and sphalerite with minor chalcopyrite and pyrite as hypogene minerals and cerussite, anglesite, covellite, malachite, hematite, and goethite as secondary minerals. Fluorite and quartz are the dominant gangue minerals and show a close relationship with sulfide mineralization. Calculated δ34S values for the ore fluid vary between -9.9‰ and -5.9‰. Sulfur isotopic compositions suggest that the ore-forming aqueous solutions were derived from magmatic source and mixed with isotopically light sulfur, probably leached from the volcanic and plutonic country rocks. Microthermometric study of fluid inclusions indicates homogenization temperatures of 151-352 °C. Salinities of ore-forming fluids ranged from 0.2 to 16.5 wt.% NaCl equivalent. The ore-forming fluids of the Sechangi deposit are medium- to low-temperature and salinity. Fluid mixing may have played an important role during Pb-Zn (-Cu) mineralization. The key factors allowing for metal transport and precipitation during ore formation include the sourcing of magmatic fluids with high contents of metallogenic elements and the mixing of these hydrothermal fluids with meteoric waters resulting in the formation of deposit. In terms of the genetic type of deposit, the Sechangi is classified as a volcanic-subvolcanic hydrothermal-related vein deposit.

  8. Application of enriched stable isotope technique to the study of copper bioavailability in Daphnia magna

    Institute of Scientific and Technical Information of China (English)

    Wenhong Fan; Chenguang Wu; Chunmei Zhao; Tao Yu; Yuan Zhang

    2011-01-01

    The biokinetics of Cu in Daphnia magna, including dissolved uptake, assimilation and efflux, has been determined using a gamma 67Cu radiotracer methodology.However, this gamma emitting radioisotope is not readily available due to its very short half-life.In the present study, we employed a stable isotope tracer (65Cu) to determine the Cu biokinetics and compared our results to those determined using 67Cu.The dissolved uptake rate constant of 65Cu was 3.36 L/(g·day), which is higher than that of 67Cu (1.32 L/(g·day)).With increasing food concentrations from 2×104 to 1×105 cells/mL, the Cu assimilation efficiency (AE) decreased from 46% to 11%,compared to a decrease from 27% to 16% when determined using 67Cu.The efflux of Cu from Daphnia magna was quantified following both dissolved and dietary uptake.The efflux of waterborne Cu was comparable to that of dietborne Cu and the efflux rate constant (0.32-0.52 day-1) was higher than that determined by 67Cu (0.19-0.20 day-1).By considering different water properties and handling procedure between the two experiments, we believe that these differences are reasonable.Overall, this study demonstrated that the enriched stable isotope tracer technique is a powerful tool to investigate metal bioavailability and maybe a good alternative to radioactive measurements.

  9. Shell quenching in Ni78: A hint from the structure of neutron-rich copper isotopes

    Science.gov (United States)

    Sieja, K.; Nowacki, F.

    2010-06-01

    Recent progress in experimental techniques allows us to study very exotic systems like neutron-rich nuclei in the vicinity of Ni78. The spectroscopy of this region can nowadays be studied theoretically in the large scale shell model calculations. In this work, we perform a shell model study of odd copper nuclei with N=40-50, in a large valence space with the Ca48 core, using a realistic interaction derived from the CD-Bonn potential. We present the crucial importance of the proton core excitations for the description of spectra and magnetic moments, which are for the first time correctly reproduced in theoretical calculations. Shell evolution from Ni68 to Ni78 is discussed in detail. A weakening of the Z=28 gap when approaching the N=50 shell closure, suggested by the experimental evidence, is confirmed in the calculations.

  10. Multiple Sulfate Isotopic Evidence on the Formation of Oxide Copper Ore at Spence, Atacama Desert, Northern Chile

    Science.gov (United States)

    Sun, T.; Bao, H.; Reich, M.; Palacios, C.

    2007-12-01

    In the Atacama Desert of northern Chile, one of the world's richest metallogenic provinces, porphyry copper deposits are characterized by the unique occurrence of atacamite in their oxidized zones. The origin and formation of the oxide zone of these copper deposits is, however, controversial. It was proposed that Cl-rich deep formation water pumping-up events along faults by earthquakes, after onset of the hyperaridity, were required (Cameron et al., 2007). Their model would imply that supplies of saline deep formation water from fractures to the surface should have left behind a homogeneous or fracture-controlled salt profile from surface down to the oxide zone. While no excluding the deep formation water model in other deposit, here we propose that, in our sampling region, the alternative saline source, which is critical for atacamite formation, could be locally evaporated groundwater, Cl-rich salts leached from arid surface by meteoric water, or brines from eastern salar basins at a time when the climate in northern Chile was changing from arid to hyperarid. At this climate transition, arid- requiring minerals such as atacamite in the oxide zone were formed and, more importantly, preserved upon evaporation beneath the surface alluvial deposits. Since salt accumulation at the surface remain active during hyperarid condition, our model would predict that water-soluble salt profile from surface to the oxide zone should have a characteristic pattern: salts with an atmospheric component on the surface gradually transitioning to salts of the oxide ore zone on the bottom and a mixing zone in between. To test these two alternative models, we focus on sulfate salts, one of the common water-soluble salts in arid environments. An added advantage is that sulfate accumulated on desert surface has a secondary atmospheric component that bears a unique triple oxygen isotope signature, easily distinguishable from sulfate formed by the oxidation of sulfide minerals at the oxide

  11. The oceanic mass balance of copper and zinc isotopes, investigated by analysis of their inputs, and outputs to ferromanganese oxide sediments

    Science.gov (United States)

    Little, S. H.; Vance, D.; Walker-Brown, C.; Landing, W. M.

    2014-01-01

    The oceanic biogeochemical cycles of the transition metals have been eliciting considerable attention for some time. Many of them have isotope systems that are fractionated by key biological and chemical processes so that significant information about such processes may be gleaned from them. However, for many of these nascent isotopic systems we currently know too little of their modern oceanic mass balance, making the application of such systems to the past speculative, at best. Here we investigate the biogeochemical cycling of copper (Cu) and zinc (Zn) isotopes in the ocean. We present estimates for the isotopic composition of Cu and Zn inputs to the oceans based on new data presented here and published data. The bulk isotopic composition of dissolved Cu and Zn in the oceans (δ65Cu ∼+0.9‰, δ66Zn ∼+0.5‰) is in both cases heavier than their respective inputs (at around δ65Cu = +0.6‰ and δ66Zn = +0.3‰, respectively), implying a marine process that fractionates them and a resulting isotopically light sedimentary output. For the better-known molybdenum isotope system this is achieved by sorption to Fe-Mn oxides, and this light isotopic composition is recorded in Fe-Mn crusts. Hence, we present isotopic data for Cu and Zn in three Fe-Mn crusts from the major ocean basins, which yield δ65Cu = 0.44 ± 0.23‰ (mean and 2SD) and δ66Zn = 1.04 ± 0.21‰. Thus for Cu isotopes output to particulate Fe-Mn oxides can explain the heavy isotopic composition of the oceans, while for Zn it cannot. The heavy Zn in Fe-Mn crusts (and in all other authigenic marine sediments measured so far) implies that a missing light sink is still to be located. These observations are some of the first to place constraints on the modern oceanic mass balance of Cu and Zn isotopes.

  12. Peculiar oxygen and copper isotope effects on the pseudogap formation temperature in underdoped to overdoped cuprates: Pseudogap induced by pairing correlations above Tc in cuprates with large and small Fermi surfaces

    Science.gov (United States)

    Dzhumanov, S.; Khudayberdiev, Z. S.; Djumanov, Sh. S.

    2015-05-01

    We investigate the pseudogap (PG) state and the peculiar oxygen and copper isotope effects on the PG onset temperature T* in cuprate superconductors with large and small Fermi surfaces within the polaron model and two different BCS-based approaches extended to the intermediate coupling regime. We argue that the unconventional electron-phonon interactions are responsible for the polaron formation and BCS-like pairing correlations above Tc in underdoped to overdoped cuprates, which are exotic (non-BCS) superconductors. Using the generalized BCS-like theory, we calculate pseudogap formation temperatures T*, isotope shifts ΔT*, oxygen and copper isotope exponents (i.e. αT*O and αT*Cu) and show that isotope effects on T* strongly depend on strengths of Coulomb and electron-phonon interactions, doping levels and dielectric constants of the cuprates. This theory explains the existence of small positive or sign reversed oxygen isotope effect, sizable and very large negative oxygen and copper isotope effects on T* in cuprates with large Fermi surfaces. Further, we use another version of the extended BCS-like model to study the PG formation and the peculiar isotope effects on T* in deeply underdoped cuprates with small Fermi surfaces and predict the existence of small and sizable negative oxygen and copper isotope effects on T* in such underdoped cuprates. The results for T*, isotope shifts ΔT* and exponents (αT*O and αT*Cu) in different classes of high-Tc cuprates are in good agreement with the existing well-established experimental data and explain the controversy between various experiments on isotope effects for T* in the cuprates.

  13. Rare earth element and stable sulphur (δ 34S) isotope study of baryte-copper mineralization in Gulani area, Upper Benue Trough, NE Nigeria

    Science.gov (United States)

    El-Nafaty, Jalo Muhammad

    2015-06-01

    The geology of Gulani area comprises of inliers of diorite and granites of the Older Granite suite of the Pan-African (600 ± 150 Ma) age within Cretaceous sediments of the Bima, Yolde and Pindiga Formations and the Tertiary/Quaternary basalts of the Biu Plateau. Epigenetic baryte-copper mineralization occurs as baryte veins within the Bima and Yolde sandstones and fracture-filling malachite in Pan-African granites. Unaltered (distal), hydrothermally altered (proximal) granites and sandstones and vein materials (mineral separates of baryte and chalcopyrite/malachite mineralized rocks) were analysed for rare earth elements (REE) and stable sulphur isotopes. The REE patterns of the unaltered rocks (both granites and sandstones) indicate background values before mineralization, depicted by enriched LREE, depleted HREE and weak negative Eu anomalies typical of Pan-African (calc-alkaline) granites and sandstones derived from them. On the other hand, the hydrothermally altered and mineralized rocks and mineral separates show a distinct baryte and copper mineralization sub-systems characterized by similar high LREE and corresponding low HREE abundances. However, the negative Eu anomalies of the copper sub-system hosted by granites are typical of Pan-African (calc-alkaline) granites. The sandstone host rocks of the baryte sub-system are marked by positive Eu anomalies interpreted as reflecting the injection and subsequent deposition of the baryte-bearing hydrothermal solutions under oxidizing conditions. The baryte mineral separates show δ (34S) isotope range of 12.3-13.1‰ (CDT) indicating sulphur from sedimentary formation sources. This ruled out magmatic source of the sulphur from the nearby Tertiary/Quaternary volcanic rocks of the Biu Plateau as well as ocean water. However, the stable sulphur isotopic determination of the sulphides (chalcopyrite/malachite mineral separates and mineralized rocks) did not yield peaks and therefore no inferences drawn in this regard.

  14. Determination of isotopic composition of dissolved copper in seawater by multi-collector inductively coupled plasma mass spectrometry after pre-concentration using an ethylenediaminetriacetic acid chelating resin.

    Science.gov (United States)

    Takano, Shotaro; Tanimizu, Masaharu; Hirata, Takafumi; Sohrin, Yoshiki

    2013-06-19

    Copper is an essential trace metal that shows a vertical recycled-scavenged profile in the ocean. To help elucidate the biogeochemical cycling of Cu in the present and past oceans, it is important to determine the distribution of Cu isotopes in seawater. However, precise isotopic analysis of Cu has been impaired by the low concentrations of Cu as well as co-existing elements that interfere with measurements by multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). The objective of this study is to develop a simple Cu pre-concentration method using Nobias-chelate PA1 resin (Hitachi High Technologies). This extraction followed by anion exchange, allows precise analysis of the Cu isotopic composition in seawater. Using this method, Cu was quantitatively concentrated from seawater and >99.9999% of the alkali and alkaline earth metals were removed. The technique has a low procedural blank of 0.70 ng for Cu for a 2L sample and the precision of the Cu isotopic analysis was ±0.07‰ (±2SD, n=6). We applied this method to seawater reference materials (i.e., CASS-5 and NASS-6) and seawater samples obtained from the northwestern Pacific Ocean. The range of dissolved δ(65)Cu was 0.40-0.68‰.

  15. Lead-isotopic, sulphur-isotopic, and trace-element studies of galena from the Silesian-Cracow Zn-Pb ores, polymetallic veins from the Gory Swietokrzyskie MTS, and the Myszkow porphyry copper deposit, Poland

    Science.gov (United States)

    Church, S.E.; Vaughn, R.B.; Gent, C.A.; Hopkins, R.T.

    1996-01-01

    Lead-isotopic data on galena samples collected from a paragenetically constrained suite of samples from the Silesian-Cracow ore district show no regional or paragenetically controlled lead-isotopic trends within the analytical reproducibility of the measurements. Furthermore, the new lead-isotopic data agree with previously reported lead-isotopic results (R. E. Zartman et al., 1979). Sulfur-isotopic analyses of ores from the Silesian-Cracow district as well as from vein ore from the Gory Swietokrzyskie Mts. and the Myszkow porphyry copper deposit, when coupled with trace-element data from the galena samples, clearly discriminate different hydrothermal ore-forming events. Lead-isotopic data from the Permian and Miocene evaporite deposits in Poland indicate that neither of these evaporite deposits were a source of metals for the Silesian-Cracow district ores. Furthermore, lead-isotopic data from these evaporite deposits and the shale residues from the Miocene halite samples indicate that the crustal evolution of lead in the central and western European platform in southern Poland followed normal crustal lead-isotopic growth, and that the isotopic composition of crustal lead had progressed beyond the lead-isotopic composition of lead in the Silesian-Cracow ores by Permian time. Thus, Mesozoic and Tertiary sedimentary flysch rocks can be eliminated as viable source rocks for the metals in the Silesian-Cracow Mississippi Valley-type (MVT) deposits. The uniformity of the isotopic composition of lead in the Silesian-Cracow ores, when coupled with the geologic evidence that mineralization must post-date Late Jurassic faulting (E. Gorecka, 1991), constrains the geochemical nature of the source region. The source of the metals is probably a well-mixed, multi-cycle molasse sequence of sedimentary rocks that contains little if any Precambrian metamorphic or granitic clasts (S. E. Church, R. B. Vaughn, 1992). If ore deposition was post Late Jurassic (about 150 m. y.) or later

  16. Determination of isotopic composition of dissolved copper in seawater by multi-collector inductively coupled plasma mass spectrometry after pre-concentration using an ethylenediaminetriacetic acid chelating resin

    Energy Technology Data Exchange (ETDEWEB)

    Takano, Shotaro, E-mail: shotaro@inter3.kuicr.kyoto-u.ac.jp [Institute for Chemical Research, Kyoto University, Uji, Kyoto 611-0011 (Japan); Tanimizu, Masaharu [Kochi Institute for Core Sample Research, Japan Agency for Marine-Earth Science and Technology, 200 Monobe Otsu, Nankoku 783-8502 (Japan); Hirata, Takafumi [Laboratory for Planetary Sciences, Division of Earth and Planetary Sciences, Kyoto University, Kitashirakawa Oiwake-cho, Kyoto 606-8502 (Japan); Sohrin, Yoshiki [Institute for Chemical Research, Kyoto University, Uji, Kyoto 611-0011 (Japan)

    2013-06-19

    Graphical abstract: -- Highlights: •A simple analytical method for determining the Cu isotopic composition in seawater using an ethylenediaminetriacetic acid chelating resin was developed. •The accuracy was evaluated via addition of NIST SRM976 or {sup 65}Cu-enriched standard to seawater. •δ{sup 65}Cu of seawater reference materials (i.e., CASS-5 and NASS-6) and seawater samples from the northwestern Pacific Ocean were firstly determined. -- Abstract: Copper is an essential trace metal that shows a vertical recycled-scavenged profile in the ocean. To help elucidate the biogeochemical cycling of Cu in the present and past oceans, it is important to determine the distribution of Cu isotopes in seawater. However, precise isotopic analysis of Cu has been impaired by the low concentrations of Cu as well as co-existing elements that interfere with measurements by multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). The objective of this study is to develop a simple Cu pre-concentration method using Nobias-chelate PA1 resin (Hitachi High Technologies). This extraction followed by anion exchange, allows precise analysis of the Cu isotopic composition in seawater. Using this method, Cu was quantitatively concentrated from seawater and >99.9999% of the alkali and alkaline earth metals were removed. The technique has a low procedural blank of 0.70 ng for Cu for a 2 L sample and the precision of the Cu isotopic analysis was ±0.07‰ (±2SD, n = 6). We applied this method to seawater reference materials (i.e., CASS-5 and NASS-6) and seawater samples obtained from the northwestern Pacific Ocean. The range of dissolved δ{sup 65}Cu was 0.40–0.68‰.

  17. Petrography, sulfide mineral chemistry, and sulfur isotope evidence for a hydrothermal imprint on Musina copper deposits, Limpopo Province, South Africa: Evidence for a breccia pipe origin?

    Science.gov (United States)

    Chaumba, Jeff B.; Mundalamo, Humbulani R.; Ogola, Jason S.; Cox, J. A.; Fleisher, C. J.

    2016-08-01

    values of 0.4 and 0.7‰. The same sample also yielded a δ34Sbornite value of 0.4‰. Another Campbell Mine quartz vein sample yielded a chalcopyrite δ34S value of -0.3‰. Sulfur isotope thermometry for one Campbell Mine quartz vein sample with coexisting sulfides yielded a Δ34Schalcopyrite-bornite value of 359 °C that is consistent with the stability of this mineral pair. Thus, δ34S values from Campbell Mine are consistent with an igneous source for the sulfur. Based on a simple two-end member isotope mixing model, contamination of the sulfur by sulfur derived from granitic country rocks likely occurred at Artonvilla Mine. Based on findings from this study and by other previous investigators, it is concluded that features displayed by the Musina copper deposits are consistent with a breccia pipe origin for the Musina copper deposits.

  18. The nature of hydrothermal fluids in the Kahang porphyry copper deposit (Northeast of Isfahan based on mineralography, fluid inclusion and stable isotopic data

    Directory of Open Access Journals (Sweden)

    Salimeh Sadat Komeili

    2017-02-01

    event, owing to the pressure reduction in the faulted zones and mineralized hydrothermal breccias and/or increase of hydrostatic pressure compared to the lithostatic pressure. This may be caused by the instability of the copper complex accompanied by precipitation of copper. The decrease of temperature and the diluted mineralized fluids could be the cause of precipitation of copper due to mixing with the meteoric water. Stable isotope study supports the mixing of magmatic and meteoric waters in the peripheral zones of ore deposit (phyllic and propyllitic zones. Acknowledgements This paper has benefited from critical comments by Dr. Shamsi pour and Dr. Mackizadeh who are thanked for their interest. Financial support of the University of Isfahan is acknowledged. References Afshooni, S.Z., Esmaeily, D. and Asadi Haroni, H., 2014. Stable isotopes (S, H, O study In phyllic and potassic- phyllic alteration zones of the Kahang porphyry copper- Molybdenum deposit (Northeast of Isfahan. Journal of Advanced Applied Geology, 1(7: 64-73. (in Persian Asadi, H., 2007. Detailed exploration in Kahang porphyry Cu- Mo index. Dorsa pardazeh company, Isfahan, Report 3, 114 pp. (in Persian Hezarkhani, A., 2006. Hydrothermal evolution of the Sar-Cheshmeh porphyry Cu-Mo deposit, Iran: Evidence from fluid inclusions. Journal of Asian Earth Sciences, 28(4-6: 409-422. Hezarkhani, A., 2009. Hydrothermal fluid geochemistry at the Chah-Firuzeh porphyry copper deposit, Iran: Evidence from fluid inclusions. Journal of Geochemical Exploration, 101(3: 254-264. Morales Ruano, S., Both, R.A. and Golding, S.D., 2002. A fluid inclusion and stable isotope study of the Moonta copper-gold deposits, South Australia: evidence for fluid immiscibility in a magmatic hydrothermal system. Chemical Geology, 192(3-4: 211-226.

  19. Two series of copper-gold deposits in the middle and lower reaches of the Yangtze River area (MLYRA) and the hydrogen, oxygen, sulfur and lead isotopes of their ore-forming hydrothermal systems

    Institute of Scientific and Technical Information of China (English)

    周涛发; 袁峰; 岳书仓; 赵勇

    2000-01-01

    Based on studies on the geological characteristics of the copper-gold deposits in the middle and lower reaches of the Yangtze River area (MLYRA) and their hydrogen, oxygen, sulfur and lead isotope compositions, it is concluded that there existed two series of copper-gold deposits. They are evolutional products of two ore-forming hydrothermal systems in different geodynamic settings and geological era. Series I is stratiform or stratabound copper-gold deposits. These deposits were formed by submarine exhalation and sedimentation of hydrothermal solutions in Her-cynian tensional tectonic environment after bot brine ascending along contemporaneous faults and exhaled into the sea-floor. Series II consists of copper-gold deposits related to medium and acidic magmatic intrusions. Their mineralizations took place in Yanshanian in a tensional or a transitional period to the tensional tectonic environment from the composite of the tethys tectonic regime and the Paleo-Pacific ocean tectonic regime, as well as in

  20. Copper isotope fractionation during sulfide-magma differentiation in the Tulaergen magmatic Ni-Cu deposit, NW China

    Science.gov (United States)

    Zhao, Yun; Xue, Chunji; Liu, Sheng-Ao; Symons, David T. A.; Zhao, Xiaobo; Yang, Yongqiang; Ke, Junjun

    2017-08-01

    Although it has been recently demonstrated that Cu isotope fractionation during mantle melting and basaltic magma differentiation is limited, the behavior of Cu isotopes during magmatic differentiation involving significant sulfide segregation remains unclear. Magmatic Ni-Cu deposits, which formed via sulfide segregation from basaltic or picritic magmas, are appropriate targets to address this issue. Here we report Cu isotope data for sulfides (chalcopyrite) from the Tulaergen Ni-Cu sulfide deposit in Xinjiang, NW China. Sulfides, including sparsely disseminated (hosted by hornblende gabbro), moderately disseminated (hosted by hornblende olivine websterite), densely disseminated (hosted by hornblende lherzolite) and massive sulfides (sandwiched between country rocks and mafic-ultramafic rocks), were collected from adits at 1050 m, 1100 m and 1150 m levels. The sparsely and moderately disseminated sulfides on 1150 m and 1050 m levels have a restricted range of δ65Cu values from - 0.38‰ to 0.15‰, whereas disseminated and massive sulfides on 1100 m level have δ65Cu values ranging widely from - 1.98‰ to - 0.04‰ and from - 1.08‰ to - 0.52‰, respectively. The δ65Cu values of disseminated sulfides are negatively correlated with whole-rock S and Cu concentrations, and sulfides formed at later stages have heavier δ65Cu values. These observations suggest significant Cu isotope fractionation during sulfide-magma differentiation above 600 °C. During the formation of the Tulaergen magmatic Ni-Cu deposit, sulfide segregation and crystallization of olivine and pyroxene caused the increase of Fe3 + contents in the residual magmas, which would move the redox reaction Cu+ + Fe3 + = Fe2 + + Cu2 + toward larger amounts of Cu2 + in the melt. The presence of Cu2 + in melt allowed redox transformation to happen during sulfide segregation. The residual magmas are enriched in heavy Cu isotopes due to the removal of 65Cu-depleted sulfides, and sulfides formed at later

  1. Isotopic and elemental abundances of copper and zinc in lunar samples, Zagami, Pele’s hairs, and a terrestrial basalt

    Science.gov (United States)

    Herzog, G. F.; Moynier, F.; Albarède, F.; Berezhnoy, A. A.

    2009-10-01

    We used ICP-MS to measure the elemental concentrations and isotopic abundances of Cu and Zn in: nine Ti-rich lunar basalts (10017, 10022, 10024, 10057, 70215, 71055, 74255, 75055, and 75075); size-separated samples prepared by sieving of pyroclastic black glass 74001, orange glass 74022, and the lunar soils 15021, 15231, 70181, and 79221; a basalt from the Piton des Neiges volcano, Reunion Island; two samples of Pele's hairs from the Nyiragongo volcano, Democratic Republic of Congo, and the martian meteorite Zagami. The isotopic fractionation of zinc in lunar basalts and Zagami is mass dependent relative to a terrestrial standard (JMC 400882B). These and published results imply that lunar, terrestrial, meteoritic, and perhaps martian zinc all come from one or more reservoirs linked by mass-dependent fractionation processes. Relative to terrestrial basalts, Ti-rich lunar basalts are enriched in the heavier isotopes of Cu and Zn: we find for Ti-rich lunar basalts the following ranges and averages ±1 - σ (‰): δ 65Cu/ 63Cu ≡ δ 65Cu, 0.1-1.4, 0.5 ± 0.1‰ ( N = 7); δ 66Zn/ 64Zn ≡ δ 66Zn = 0.2-1.9, 1.2 ± 0.2‰ ( N = 8; 10017 excluded). For two terrestrial samples, we find δ 66Zn ˜ +0.3‰ and δ 65Cu ˜ 0‰, which are consistent with published values. The differences between the lunar basalts and terrestrial basalts could reflect minor, planetary-scale vaporization or igneous processes on the Moon. Data for size separates of the pyroclastic glasses 74001 and 74220 confirm the well-known surface correlation of Cu and Zn, but modeling calculations reveal no sharp differences between either the elemental ratios or the isotopic composition of grain interiors and exteriors. The absence of such differences indicates that the isotopic compositions for bulk samples are dominated by a light-isotope-rich surface component. Data for size separates of lunar soils also confirm the surface correlation of Cu and Zn, but an enrichment of heavy rather than light

  2. Zinc and copper behaviour at the soil-river interface: New insights by Zn and Cu isotopes in the organic-rich Rio Negro basin

    Science.gov (United States)

    Guinoiseau, Damien; Gélabert, Alexandre; Allard, Thierry; Louvat, Pascale; Moreira-Turcq, Patricia; Benedetti, Marc F.

    2017-09-01

    The complex behaviour of Zn and Cu at the soil-river interface was investigated in soil and riverine water samples from the Rio Negro basin, a secondary tributary of the Rio Amazonas, using their stable isotope compositions. This acidic and organic river drains two types of intensely weathered terrains: podzols in its upstream part, and lateritic soils downstream. Bulk soil particles, suspended particulate matter (SPM) as well as colloidal fractions were sampled across the whole basin during low and high water stages. In the basin, Zn and Cu are mostly exported from lateritic soils and transported by organic colloids where significant losses are observed in the downstream part of the river. The use of δ66Zn and δ65Cu measurements reveals distinct stories for these two metals in suspended sediments and colloids. In the colloids, the constant δ66Zncoll across the basin is induced by the same weak association mode between Zn and organic ligands, regardless of the origin of the water. By contrast, in SPM, the speciation of Zn and thus δ66ZnSPM differ according to the type of drained soils. Zn is associated with organic complexes in particles exported with water draining podzol whereas Zn2+ is incorporated in the structure of the remaining kaolinite clays in lateritic output. The stronger reactivity of Cu than Zn with organic ligands induces its complete complexation. Copper is controlled by refractory particulate organic matter (POM) and by reactive colloidal organic matter; the latter being enriched in 65Cu due to stronger binding interactions than in POM. While the Cu content remains constant in the upstream part of the Rio Negro, downstream, the decrease of SPM and colloidal Cu fluxes is associated with a constant δ65CuSPM and with an increase of δ65Cucoll at the Rio Negro outlet. Geochemical mass balance modelling, based on SPM, Cu and Zn fluxes in SPM and their associated isotopic signatures, confirms distinct host phases for Zn and Cu, and identifies the

  3. Systematic sulfur stable isotope and fluid inclusion studies on veinlet groups in the Sarcheshmeh porphyry copper deposit: based on new data

    Directory of Open Access Journals (Sweden)

    Mohammad Maanijou

    2012-10-01

    Full Text Available Mineralization occurred by intrusion of granodioritic stock of middle Miocene in volcano–sedimenrary rocks in Sarcheshmeh of early Tertiary age. This research is based on samples of new drilled boreholes and benches of 2500m elevation. Based on mineralogy and crosscutting relationships, at least four groups of veinlets pertaining to four stages of mineralization were recognized. Sulfur isotope studies in the Sarcheshmeh porphyry copper deposit were conducted on pyrite, chalcopyrite, molybdenite and anhydrites of four groups of veinlets. The δ34S values in the sulfides and sulfates range from -2.2 to 1.27‰ and from 10.2 to 14.5 ‰, respectively. The average δ34S value in the sulfides is 1‰ and that for the sulfates is about 13‰. Considering these results, it can be concluded that the sulfides made up of a fluid that its sulfur has a magmatic origin. Also, fluid inclusions of different veinlet groups were studied, showing high temperature, high salinity and the occurrence of boiling in the mineralizing fluids. Moreover, these studies indicate presence of three types of fluids including magmatic, meteoritic and mixture of these two fluids in alteration and mineralizion processes.

  4. Zircon U-Pb geochronology, geochemistry, and Sr-Nd-Hf isotopes of granitoids in the Yulekenhalasu copper ore district, northern Junggar, China: Petrogenesis and tectonic implications

    Science.gov (United States)

    Yang, Fuquan; Chai, Fengmei; Zhang, Zhixin; Geng, Xinxia; Li, Qiang

    2014-03-01

    The Yulekenhalasu porphyry copper deposit is located in the Kalaxiange'er metallogenic belt in northern Junggar, China. We present the results from zircon U-Pb geochronology, and geochemical and Sr-Nd-Hf isotope analyses of the granitoids associated with the ore deposits with a view to constrain their petrogenesis and tectonic setting. The granitoids consist of quartz diorite, diorite porphyry, porphyritic monzonite, and quartz porphyry, emplaced at 382, 379, 375-374, and 348 Ma, respectively, which span Late Devonian to early Carboniferous ages. The ore-bearing intrusion is mainly diorite porphyry, with subordinate porphyritic monzonite. The Late Devonian intrusions are characterized by SiO2 contents of 54.5-64.79 wt.%, Na2O contents of 3.82-8.24 wt.%, enrichment in Na, light rare-earth elements (LREEs), and large ion lithophile elements. They also display relative depletion in Y, Ba, P, Nb, Ta, and Ti, and weak negative Eu anomalies (δEu = 0.6-0.87). The early Carboniferous quartz porphyry is characterized by high SiO2 content (72.26-73.35 wt.%), enrichment in LREEs, K, and Sr, and relative depletion in Y (10.82-12.52 ppm) and Yb (1.06-1.15 ppm). The Late Devonian and early Carboniferous granitoids are characterized by positive ɛNd(t) values (5.2-10.1, one sample at - 1.9), positive ɛHf(t) values (7.46-18.45), low (87Sr/86Sr)i values (0.70363-0.70476), and young crustal residence ages. These data indicate that the sources of the granitoids were mainly mantle-derived juvenile rocks. Geochemical and Nd-Sr-Hf isotopic data demonstrate that the Late Devonian granitoids formed in an oceanic island arc, and they were formed from different sources, among which the mineralized diorite porphyry might have originated from a mixed slab-derived and mantle wedge melt source. The early Carboniferous quartz porphyry was likely emplaced in a mature island arc environment, and was probably derived from juvenile crust.

  5. Monzonitoid magmatism of the copper-porphyritic Lazurnoe deposit (South Primor'e): U-Pb and K-Ar geochronology and peculiarities of ore-bearing magma genesis by the data of isotopic-geochemical studies

    Science.gov (United States)

    Sakhno, V. G.; Kovalenko, S. V.; Alenicheva, A. A.

    2011-05-01

    Magmatic rocks from the copper-porphyritic Lazurnoe deposit (Central Primor'e) have been studied. It has been found that rocks from the Lazurnyi massif are referred to gabbro-monzodiorites, monzodiorites, and monzo-granodiorites formed during two magmatic phases of different ages. The earlier phase is represented by gabbro-monzodiorites and diorites of the North Stock, and the later one, by gabbro-monzodiorites and monzo-grano-diorites of the South Stock. On the basis of isotopic dating by the U-Pb (SHRIMP) method for zircon and by the K-Ar method for hornblendes and biotites, the age of magmatic rocks is determined at 110 ± 4 for the earlier phase and at 103.5 ± 1.5 for the later one. Examination of the isotopic composition for Nd, Sr, Pb, Hf, δ18O, and REE spectra has shown that melts of the first phase are contaminated with crustal rocks and they are typical for a high degree of secondary alterations. Potassiumfeldspar, biotite, propylitic alterations, and sulfidization are manifested in these rocks. The rocks of the later stage of magmatism are characteristic for a primitive composition of isotopes and the absence of secondary alterations. They carry the features of adakite specifics that allows us to consider them derivatives of mantle generation under high fluid pressure. The intrusion of fluid-saturated melts of the second phase into the magmatic source of the first phase caused both an alteration pattern of rocks and copper-porphyritic mineralization. Isotopes of sulfur and oxygen allow us to consider the ore component to be of magmatic origin.

  6. Isotopic signatures suggest important contributions from recycled gasoline, road dust and non-exhaust traffic sources for copper, zinc and lead in PM10 in London, United Kingdom

    Science.gov (United States)

    Dong, Shuofei; Ochoa Gonzalez, Raquel; Harrison, Roy M.; Green, David; North, Robin; Fowler, Geoff; Weiss, Dominik

    2017-09-01

    The aim of this study was to improve our understanding of what controls the isotope composition of Cu, Zn and Pb in particulate matter (PM) in the urban environment and to develop these isotope systems as possible source tracers. To this end, isotope ratios (Cu, Zn and Pb) and trace element concentrations (Fe, Al, Cu, Zn, Sb, Ba, Pb, Cr, Ni and V) were determined in PM10 collected at two road sites with contrasting traffic densities in central London, UK, during two weeks in summer 2010, and in potential sources, including non-combustion traffic emissions (tires and brakes), road furniture (road paint, manhole cover and road tarmac surface) and road dust. Iron, Ba and Sb were used as proxies for emissions derived from brake pads, and Ni, and V for emissions derived from fossil fuel oil. The isotopic composition of Pb (expressed using 206Pb/207Pb) ranged between 1.1137 and 1.1364. The isotope ratios of Cu and Zn expressed as δ65CuNIST976 and δ66ZnLyon ranged between -0.01‰ and +0.51‰ and between -0.21‰ and +0.33‰, respectively. We did not find significant differences in the isotope signatures in PM10 over the two weeks sampling period and between the two sites, suggesting similar sources for each metal at both sites despite their different traffic densities. The stable isotope composition of Pb suggests significant contribution from road dust resuspension and from recycled leaded gasoline. The Cu and Zn isotope signatures of tires, brakes and road dust overlap with those of PM10. The correlation between the enrichments of Sb, Cu, Ba and Fe in PM10 support the previously established hypothesis that Cu isotope ratios are controlled by non-exhaust traffic emission sources in urban environments (Ochoa Gonzalez et al., 2016). Analysis of the Zn isotope signatures in PM10 and possible sources at the two sites suggests significant contribution from tire wear. However, temporary additional sources, likely high temperature industrial emissions, need to be invoked

  7. A novel absolute quantitative imaging strategy of iron, copper and zinc in brain tissues by Isotope Dilution Laser Ablation ICP-MS.

    Science.gov (United States)

    Feng, Liuxing; Wang, Jun; Li, Hongmei; Luo, Xinzheng; Li, Jiao

    2017-09-01

    Isotope Dilution Laser Ablation ICP-MS (ID-LA-ICP-MS), because of its impressive spatial resolution capacity and precise means for quantification, is one of the most promising tools for in-situ quantitative imaging of trace elements in biological samples. In the ID-LA-ICP-MS strategy for tissue section, the tissue must be maintained intact during the whole sample preparation process. Therefore, how to homogeneously distribute enriched isotope spike on tissue section and how to confirm isotope equilibration between sample and spike are two important challenges. In this study, we reported a novel quantitative imaging strategy for biological thin section based on ID-LA-ICP-MS. To distribute the enriched isotope spikes on tissue section homogeneously, a "border" was constructed to make spike droplet stay on the tissue for isotope exchange. Laser ablation and isotope exchange parameters were also investigated to obtain optimal ID-LA-ICP-MS conditions. The prepared homogeneous in-house standard was used to validate the ID-LA-ICP-MS approach and good agreement with the bulk analysis was achieved. On this basis, quantitative imaging of Fe, Cu and Zn in real mouse brain of Alzheimer's Disease (AD) were measured by the improved methodology. Assessment of the method for real sample was undertaken by comparison of the LA-ICP-MS data with that obtained by micro-XRF. Moreover, comparative analysis of elements distribution and immunohistochemical markers in AD mouse brain was also carried out. The similar distributional patterns demonstrated that the proposed methodology is potential to investigate the correlation of biomarker heterogeneity and elements distribution, and may be useful to understand such complex brain mechanisms in the future. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Examination of chloritization of biotite as a tool for reconstructing the physicochemical parameters of mineralization and associated alteration in the Zafarghand porphyry copper system, Ardestan, Central Iran: mineral-chemistry and stable isotope analyses

    Science.gov (United States)

    Aminroayaei Yamini, Maryam; Tutti, Faramarz; Aminoroayaei Yamini, Mohammad Reza; Ahmadian, Jamshid; Wan, Bo

    2016-12-01

    The chloritization of biotite and stable isotopes of silicate have been studied for the Zafarghand porphyry copper deposit, Ardestan, Iran. The studied area, in the central part of the Urumieh-Dokhtar magmatic belt, contains porphyry-style Cu mineralization and associated hydrothermal alteration within the Miocene (19-26 Ma, Zircon U-Pb age) granodioritc stock and adjacent andesitic to rhyodacitic volcanic rocks (ca. 56 Ma, zircon U-Pb age). The primary and secondary biotite that formed during potassic alteration in this porphyry and these volcanic host rocks are variably chloritized. Chloritization of biotite pseudomorphically is characterized by an increase in MgO, FeOt, and MnO, with decreasing in SiO2, K2O, and TiO2. Based on the Ti-in-biotite geothermometer of Henry et al. (Am Mineral 90:316-328, 2005) and Al-in-chlorite geothermometer of Cathelineau (Clay Miner 23:417-485, 1988), crystallization temperatures of primary biotite representative of magmatic conditions and later chloritization temperature range from 617° to 675 °C ± 24 °C and 177° to 346 °C, respectively. Calculated isotopic compositions of fluids that chloritized primary and secondary biotite display isotopic compositions of 1.1 to 1.7 per mil for δ18O and -19.9 to -20.5 per mil for δD consistent with meteoric water. Sericite, barren, and A-type-quartz veins from phyllic alteration were produced by mixed magmatic and meteoric water with δ18O values from -2.8 to 2.5 and δD values of ˜ -23 per mil; the narrow range of δD values of the propylitic epidote may be due to a meteoric water with δ18O values from 0.8 to 1.6 and δD values from -14.6 to -16.9 per mil.

  9. Copper hypersensitivity.

    Science.gov (United States)

    Fage, Simon W; Faurschou, Annesofie; Thyssen, Jacob P

    2014-10-01

    The world production of copper is steadily increasing. Although humans are widely exposed to copper-containing items on the skin and mucosa, allergic reactions to copper are only infrequently reported. To review the chemistry, biology and accessible data to clarify the implications of copper hypersensitivity, a database search of PubMed was performed with the following terms: copper, dermatitis, allergic contact dermatitis, contact hypersensitivity, contact sensitization, contact allergy, patch test, dental, IUD, epidemiology, clinical, and experimental. Human exposure to copper is relatively common. As a metal, it possesses many of the same qualities as nickel, which is a known strong sensitizer. Cumulative data on subjects with presumed related symptoms and/or suspected exposure showed that a weighted average of 3.8% had a positive patch test reaction to copper. We conclude that copper is a very weak sensitizer as compared with other metal compounds. However, in a few and selected cases, copper can result in clinically relevant allergic reactions.

  10. Copper transport.

    Science.gov (United States)

    Linder, M C; Wooten, L; Cerveza, P; Cotton, S; Shulze, R; Lomeli, N

    1998-05-01

    In adult humans, the net absorption of dietary copper is approximately 1 mg/d. Dietary copper joins some 4-5 mg of endogenous copper flowing into the gastrointestinal tract through various digestive juices. Most of this copper returns to the circulation and to the tissues (including liver) that formed them. Much lower amounts of copper flow into and out of other major parts of the body (including heart, skeletal muscle, and brain). Newly absorbed copper is transported to body tissues in two phases, borne primarily by plasma protein carriers (albumin, transcuprein, and ceruloplasmin). In the first phase, copper goes from the intestine to the liver and kidney; in the second phase, copper usually goes from the liver (and perhaps also the kidney) to other organs. Ceruloplasmin plays a role in this second phase. Alternatively, liver copper can also exit via the bile, and in a form that is less easily reabsorbed. Copper is also present in and transported by other body fluids, including those bathing the brain and central nervous system and surrounding the fetus in the amniotic sac. Ceruloplasmin is present in these fluids and may also be involved in copper transport there. The concentrations of copper and ceruloplasmin in milk vary with lactational stage. Parallel changes occur in ceruloplasmin messenger RNA expression in the mammary gland (as determined in pigs). Copper in milk ceruloplasmin appears to be particularly available for absorption, at least in rats.

  11. Copper hypersensitivity

    DEFF Research Database (Denmark)

    Fage, Simon W; Faurschou, Annesofie; Thyssen, Jacob P

    2014-01-01

    hypersensitivity, a database search of PubMed was performed with the following terms: copper, dermatitis, allergic contact dermatitis, contact hypersensitivity, contact sensitization, contact allergy, patch test, dental, IUD, epidemiology, clinical, and experimental. Human exposure to copper is relatively common...

  12. Study of micronutrients cycling in boreal forest of Central Siberia on continuous permafrost using Copper (Cu) and zinc (Zn) isotope fractionation

    Science.gov (United States)

    Viers, Jérôme; Prokushkin, Anatoly; Pokrovsky, Oleg; Kirdyanov, Anatoly; Chabaux, François; Oliva, Priscia

    2010-05-01

    Boreal forests mainly located between the latitudes 46°N and 72°N play a key role in regulating the global carbon cycle and climate of the Earth. These forests store about 140 gigatons of carbon (Gt C) in above ground biomass and 180 Gt C in soil organic matter that represents about 25% and 12% of the global amounts (Tarnocai et al., 2009). Within the context of global warming, forested permafrost regions appear to be very sensitive and are likely to be deeply modified in the near future due to the increase of soil temperature and the active layer thickness, as well as the northward shift of the vegetation. Before the quantitative modelling of the evolution of these ecosystems face to the climate change and their reciprocal influence on the whole Earth system become available, we have to constrain the main processes and parameters that control elements transfer between and within mineral and organic reservoirs in order to calculate the associated element fluxes. Indeed, the hydro- and biogeochemical functioning of these boreal environments is still poorly understood. This study will present new results on two important metal micro-nutrient and toxicants (Cu and Zn) concentrations in soil and plants and Zn and Cu isotopes fractionation data we acquired within the pilot site of Tura (Central Siberia, Yenissey basin). This pilot site is located in the drainage area of Nizhnaya Tunguska River, the largest tributary of the Yenissey River, on continuous permafrost of 100 to 300 m thickness. This watershed is located in the field of Central Siberia basalts ages 248+/-20 millions years. The landscape morphology presents north-facing slopes and south facing slopes separated by riparian zones. These environments exhibit peculiarities in terms of hydrological regime, active soil depth, that is, seasonal thawing permafrost depth, nutrients availability, total biomass and plants community distribution (Prokushkin et al., 2007). This region is dominated by deciduous Dahurian

  13. Penning-trap mass spectrometry of neutron-rich copper isotopes for probing the Z = 28 and N = 50 shell closures

    CERN Multimedia

    Manea, V

    We propose to perform a Penning-trap mass measurement of $^{79}$Cu. This exotic N = 50 isotone is the last frontier before the doubly-magic $^{78}$Ni and will greatly improve our knowledge of shell evolution. In the same run, we propose $^{77-78}$Cu mass measurements, as well as the search for a possible isomer in $^{76m}$Cu. The data will help to clarify the structure of the odd proton in the Cu isotopes, the influence on the Z = 28 proton core of the νg$_{9/2}$ orbital filling and the impact of the proton-neutron residual interaction on the strength of the N = 50 shell closure.

  14. Application of Isotope Dilution Mass Spectrometry for Reference Measurements of Cadmium. Copper, Mercury, Lead, Zinc and Methyl Mercury in Marine Sediment Sample

    Directory of Open Access Journals (Sweden)

    Vasileva E.

    2013-04-01

    Full Text Available Marine sediment was selected as a test sample for the laboratory inter-comparison studies organized by the Environment Laboratoryes of the International Atomic Energy. The analytical procedure to establish the reference values for the Cd, Cu, Hg, Methyl Hg, Pb and Zn amount contents was based on Isotope Dilution Inductively Coupled Plasma-Mass Spectrometry (ID ICP-MS applied as a primary method of measurement..The Hg and Methyl Hg determination will be detailed more specifically because of the problems encountered with this element, including sample homogeneity issues, memory effects and possible matrix effects during the ICP- MS measurement stage. Reference values, traceable to the SI, with total uncertainties of less than 2% relative expanded uncertainty (k=2 were obtained for Cd, Cu, Zn and Pb and around 5% for Hg and CH3Hg.

  15. Nuclear moments, spins and charge radii of copper isotopes from N=28 to N=50 by collinear fast-beam laser spectroscopy

    CERN Multimedia

    2002-01-01

    We aim at establishing an unambiguous spin determination of the ground and isomeric states in the neutron rich Cu-isotopes from A=72 up to A=78 and to measure the magnetic and quadrupole moments between the N=28 and N=50 shell closures. This study will provide information on the double-magicity of $^{56}$Ni and $^{78}$Ni, both at the extremes of nuclear stability. It will provide evidence on the suggested inversion of ground state spin around A$\\approx$74, due to the monopole migration of the $\\pi f_{5/2}$ level. The collinear laser spectroscopy technique will be used, which furthermore provides information on the changes in mean square charge radii between both neutron shell closures, probing a possible onset of deformation in this region.

  16. Zircon U-Pb and molybdenite Re-Os geochronology and Sr-Nd-Pb-Hf isotopic constraints on the genesis of the Xuejiping porphyry copper deposit in Zhongdian, Northwest Yunnan, China

    Science.gov (United States)

    Leng, Cheng-Biao; Zhang, Xing-Chun; Hu, Rui-Zhong; Wang, Shou-Xu; Zhong, Hong; Wang, Wai-Quan; Bi, Xian-Wu

    2012-10-01

    The Xuejiping porphyry copper deposit is located in northwestern Yunnan Province, China. Tectonically, it lies in the southern part of the Triassic Yidun island arc. The copper mineralization is mainly hosted in quartz-dioritic and quartz-monzonitic porphyries which intruded into clastic-volcanic rocks of the Late Triassic Tumugou Formation. There are several alteration zones including potassic, strong silicific and phyllic, argillic, and propylitic alteration zones from inner to outer of the mineralized porphyry bodies. The ages of ore-bearing quartz-monzonitic porphyry and its host andesite are obtained by using the zircon SIMS U-Pb dating method, with results of 218.3 ± 1.6 Ma (MSWD = 0.31, N = 15) and 218.5 ± 1.6 Ma (MSWD = 0.91, N = 16), respectively. Meanwhile, the molybdenite Re-Os dating yields a Re-Os isochronal age of 221.4 ± 2.3 Ma (MSWD = 0.54, N = 5) and a weighted mean age of 219.9 ± 0.7 Ma (MSWD = 0.88). They are quite in accordance with the zircon U-Pb ages within errors. Furthermore, all of them are contemporary with the timing of the Garzê-Litang oceanic crust subduction in the Yidun arc. Therefore, the Xuejiping deposit could be formed in a continental margin setting. There are negative ɛNd(t) values ranging from -3.8 to -2.1 and relatively high initial 87Sr/86Sr ratios from 0.7051 to 0.7059 for the Xuejiping porphyries and host andesites. The (206Pb/204Pb)t, (207Pb/204Pb)t and (208Pb/204Pb)t values of the Xuejiping porphyries and host andesites vary from 17.899 to 18.654, from 15.529 to 15.626, and from 37.864 to 38.52, respectively, indicative of high radiogenic Pb isotopic features. In situ Hf isotopic analyses on zircons by using LA-MC-ICP-MS exhibit that there are quite uniform and slightly positive ɛHf(t) values ranging from -0.2 to +3.2 (mostly between 0 and +2), corresponding to relatively young single-stage Hf model ages from 735 Ma to 871 Ma. These isotopic features suggest that the primary magmas of the Xuejiping porphyries and

  17. Chemical and stable isotopic geochemical characteristics of ore-forming fluid of the Shizishan copper and gold ore-field, Tongling, China%铜陵狮子山铜金矿田成矿流体成分及稳定同位素地球化学

    Institute of Scientific and Technical Information of China (English)

    陆三明; 徐晓春; 谢巧勤; 楼金伟; 储国正; 熊亚平

    2007-01-01

    Shizishan ore-field is a nonferrous and noble metal ore-field which is most rich in copper and gold. There are many types of fluid inclusions in minerals of the deposits. The homogeneous temperatures and the salinities of the fluid inclusions in main mineralization stages have wide ranges, while the different types of the fluid inclusions existed together and their homogeneous temperatures are almost identical in the same mineralization stage, which indicates that the ore-forming process has great relation with the fluid boiling. The gas and liquid chemical compositions and the carbon, hydrogen and oxygen isotopic compositions of the fluid inclusions show that the ore-forming fluids of copper-gold deposits have the same characteristics and evolution tendency, which reflects that the ore-forming material mainly came from the magmatism. The stratigraphic component and the meteoric water may mix in oreforming fluids in the later mineralization stages. Furthermore, with the fall of the ore-forming temperature the ratios of water and rock decreased. The characteristics of chemical composition and carbon isotopic composition of fluid inclusions indicate that CH4 may play an important role for separating copper and gold in the ore-forming process.

  18. Characteristics of stable isotopic compositions and its geological significances of the Yangla copper deposit, northwestern Yunnan Province%滇西北羊拉铜矿床稳定同位素特征及其地质意义

    Institute of Scientific and Technical Information of China (English)

    陈思尧; 顾雪祥; 程文斌; 章永梅; 郑硌; 彭义伟; 刘瑞萍

    2013-01-01

    The Yangla copper deposit is locate in the middle part of the Jinshajiang belt. It was formed due to the westward subduction of the Jinshajiang oceanic basin and collisional orogeny during Mid-Late Triassic. Ore bodies are typically layered or bedded and closely related to the acidic plutons. Ore bodies are trinity controlled by the pluton, stratum and structure and have obvious feature of the skarn deposit. The stable isotopic compositions of marble and various kinds of minerals in different stages have been analyzed respectively. The results show that the δ18OSMOW values of the garnet which is the major mineral of the skarn is 6.1‰, indicating that the oxygen isotopic compositions of skarn may inherit directly from the acidic plutons. The δD values of the quartz in main mineralization are varied from — 112‰ ~-77‰ and the δ180H2O values are varied from -2. 42‰ ~4. 85‰, which reflects that the main compositions of ore-forming fluids was magmatic water and accompanied with input of meteoric water. The δ13 CPDB values of — 5.1‰ ~ — 1. 7‰ and the δ18OSMOW values of 12. 7‰ ~20.1‰ for the calcite shows that the carbon and oxygen of calcite are sourced mainly from magma and less from marble. The δ13CPDB values of 3. 6‰ ~5. 0‰ and the δ18OSMOW values of 21. 2‰ -25. 4‰ for marble indicate that the marble was re-crystallized from the oceanic carbonate. And as the distance between marble and ore-body decreases, the δ13C values and δ18O values have a trend reducing constantly, which shows that during the process which the ore-forming fluids metasomatiled marble, the fluids with low δ13C values and δ18O values occurred isotope exchange with marble and made the δ13C values and δ18 0 values of marble decrease, and the nearer distance between marble and ore-body was, the more intense the isotope exchange was. The δ34S value of ore sulfides varied from -6. 9‰ ~ 2. 5‰ and were focused from - 2‰ ~ 1‰, showing that the sulfur of

  19. Radiocopper for the imaging of copper metabolism.

    Science.gov (United States)

    Hueting, Rebekka

    2014-04-01

    The redox-active transition metal copper is an essential trace element for growth and development and serves as a structural or catalytic cofactor for many enzymes in a range of physiological processes. Mammalian copper homeostasis is tightly regulated, and an imbalance in copper metabolism is implicated in various pathological disorders. Radioactive copper isotopes, in particular (64) Cu (t1/2  = 12.7 h) and (67) Cu (t1/2  = 62.01 h), have made important contributions to the understanding of copper metabolism in health and disease. This review gives a brief account of how radiolabelled copper(II) salts and bioreductive copper complexes have been used to trace copper uptake, transport and efflux in vitro and in vivo. Recently, positron emission tomography (PET) has emerged as a noninvasive tool to image copper metabolism in living subjects and (64) Cu-PET is investigated for the study of copper-related neurological disorders, genetic diseases and cancer.

  20. Zinc isotopic compositions of breast cancer tissue.

    Science.gov (United States)

    Larner, Fiona; Woodley, Laura N; Shousha, Sami; Moyes, Ashley; Humphreys-Williams, Emma; Strekopytov, Stanislav; Halliday, Alex N; Rehkämper, Mark; Coombes, R Charles

    2015-01-01

    An early diagnostic biomarker for breast cancer is essential to improve outcome. High precision isotopic analysis, originating in Earth sciences, can detect very small shifts in metal pathways. For the first time, the natural intrinsic Zn isotopic compositions of various tissues in breast cancer patients and controls were determined. Breast cancer tumours were found to have a significantly lighter Zn isotopic composition than the blood, serum and healthy breast tissue in both groups. The Zn isotopic lightness in tumours suggests that sulphur rich metallothionein dominates the isotopic selectivity of a breast tissue cell, rather than Zn-specific proteins. This reveals a possible mechanism of Zn delivery to Zn-sequestering vesicles by metallothionein, and is supported by a similar signature observed in the copper isotopic compositions of one breast cancer patient. This change in intrinsic isotopic compositions due to cancer has the potential to provide a novel early biomarker for breast cancer.

  1. Dye laser chain for laser isotope separation

    Science.gov (United States)

    Doizi, Denis; Jaraudias, Jean; Pochon, E.; Salvetat, G.

    1993-05-01

    Uranium enrichment by laser isotope separation uses a three step operation which requires four visible wavelengths to boost an individual U235 isotope from a low lying atomic energy level to an autoionizing state. The visible wavelengths are delivered by dye lasers pumped by copper vapor lasers (CVL). In this particular talk, a single dye chain consisting of a master oscillator and amplifier stages will be described and some of its performance given.

  2. 江西永平铜多金属矿床流体包裹体及硫同位素研究%Fluid Inclusions and Sulfur Isotope of the Yongping Copper-polymetallic Deposit in Jiangxi Province

    Institute of Scientific and Technical Information of China (English)

    陈军军; 曹殿华; 杨昔林; 邱昌容; 王训军; 阚迎松

    2016-01-01

    of fluid inclusions related to metallogensis are present in the porphyry Mo deposit: I-type gas-liquid inclusion, II-type CO2-bearing three-phase inclusion and III-type daughter-minerals bearing inclusion. Homogenization temperatures and salinities of fluid inclusions at the quartz-sulfide stage range from 202℃ to 359℃ and 4.62 wt%NaCl to 36.68 wt%NaCl. The quartz-carbonate-sulfide stage yielded homogenization temperatures of 211~318℃ and salinities of 2.07~11.47 wt%NaCl. Fluid inclusions in minerals of the skarn Cu deposit are mainly I-type gas-liquid inclusions. The homogenization temperatures and salinity of fluid inclusions at the skarn stage vary in the range of 406~486℃ and 9.21~9.89 wt%NaCl. The fluid inclusions of middle-stage have the homogenization temperatures of 137~335℃ and the salinity of 4.98~13.20 wt%NaCl. The late stage fluid has the homogenization temperatures of 89~151℃ and the salinity of 2.07~19.13 wt%NaCl. Raman microspectroscopic studies of the fluid inclusions of the skarn deposit and the porphyry deposit show that the main components are CO2 and H2O, and the ore-forming fluid belongs to the H2O-CO2-NaCl system. CH4 in the Mo fluid indicates condition of low oxygen fugacity. Therefore, Mo mineralization center is formed in the early stage of fluid evolution. Mo fluid has a higher temperature and pressure with respect to the Cu fluid at the quartz-sulfide stage. Most sulfur isotope values of the sulfides give a narrowδ34S range from –0.2‰ to +1.9‰, indicating a predominant magmatic sulfur origin. The authors hold that the Yongping copper-polymetallic deposit is a porphyry-skarn type deposit resulting from the emplacement of the Late Jurassic monzogranite intrusions. From the intrusion through the contact zone to the host rocks, the mineralization is demonstrated by zoning of Mo-Cu-W-Pb-Zn.

  3. Leatherback Isotopes

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — SWFSC is currently working on a project identifying global marine isotopes using leatherback turtles (Dermochelys coriacea) as the indicator species. We currently...

  4. Isotopic chirality

    Energy Technology Data Exchange (ETDEWEB)

    Floss, H.G. [Univ. of Washington, Seattle, WA (United States)

    1994-12-01

    This paper deals with compounds that are chiral-at least in part, due to isotope substitution-and their use in tracing the steric course of enzyme reaction in vitro and in vivo. There are other applications of isotopically chiral compounds (for example, in analyzing the steric course of nonenzymatic reactions and in probing the conformation of biomolecules) that are important but they will not be discussed in this context.

  5. Isotopic Paleoclimatology

    Science.gov (United States)

    Bowen, R.

    Paleotemperature scales were calculated by H. C. Urey and others in the 1950s to assess past temperatures, and later work using the stable isotopes of oxygen, hydrogen, and carbon employed standards such as Peedee belemnite (PDB) and Standard Mean Ocean Water (SMOW). Subsequently, subjects as diverse as ice volume and paleotemperatures, oceanic ice and sediment cores, Pleistocene/Holocene climatic changes, and isotope chronostratigraphy extending back to the Precambrian were investigated.

  6. Copper allergy from dental copper amalgam?

    Science.gov (United States)

    Gerhardsson, Lars; Björkner, Bert; Karlsteen, Magnus; Schütz, Andrejs

    2002-05-06

    A 65-year-old female was investigated due to a gradually increasing greenish colour change of her plastic dental splint, which she used to prevent teeth grinding when sleeping. Furthermore, she had noted a greenish/bluish colour change on the back of her black gloves, which she used to wipe her tears away while walking outdoors. The investigation revealed that the patient had a contact allergy to copper, which is very rare. She had, however, had no occupational exposure to copper. The contact allergy may be caused by long-term exposure of the oral mucosa to copper from copper-rich amalgam fillings, which were frequently used in childhood dentistry up to the 1960s in Sweden. The deposition of a copper-containing coating on the dental splint may be caused by a raised copper intake from drinking water, increasing the copper excretion in saliva, in combination with release of copper due to electrochemical corrosion of dental amalgam. The greenish colour change of the surface of the splint is probably caused by deposition of a mixture of copper compounds, e.g. copper carbonates. Analysis by the X-ray diffraction technique indicates that the dominant component is copper oxide (Cu2O and CuO). The corresponding greenish/bluish discoloration observed on the back of the patient's gloves may be caused by increased copper excretion in tears.

  7. Copper Products Capacity Expansion Stimulate the Copper Consumption

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>The dramatic growth of copper consumption in China can directly be seen from the expansion of copper products capacity.According to sta- tistics,in the past 4 years,the improvement on the balance of trade on copper bar,copper,and copper alloy and copper wire & cable has driven the growth of copper consumption a lot.

  8. Antwerp Copper Plates

    DEFF Research Database (Denmark)

    Wadum, Jørgen

    1999-01-01

    In addition to presenting a short history of copper paintings, topics detail artists’ materials and techniques, as well as aspects of the copper industry, including mining, preparation and trade routes.......In addition to presenting a short history of copper paintings, topics detail artists’ materials and techniques, as well as aspects of the copper industry, including mining, preparation and trade routes....

  9. Copper and copper proteins in Parkinson's disease.

    Science.gov (United States)

    Montes, Sergio; Rivera-Mancia, Susana; Diaz-Ruiz, Araceli; Tristan-Lopez, Luis; Rios, Camilo

    2014-01-01

    Copper is a transition metal that has been linked to pathological and beneficial effects in neurodegenerative diseases. In Parkinson's disease, free copper is related to increased oxidative stress, alpha-synuclein oligomerization, and Lewy body formation. Decreased copper along with increased iron has been found in substantia nigra and caudate nucleus of Parkinson's disease patients. Copper influences iron content in the brain through ferroxidase ceruloplasmin activity; therefore decreased protein-bound copper in brain may enhance iron accumulation and the associated oxidative stress. The function of other copper-binding proteins such as Cu/Zn-SOD and metallothioneins is also beneficial to prevent neurodegeneration. Copper may regulate neurotransmission since it is released after neuronal stimulus and the metal is able to modulate the function of NMDA and GABA A receptors. Some of the proteins involved in copper transport are the transporters CTR1, ATP7A, and ATP7B and the chaperone ATOX1. There is limited information about the role of those biomolecules in the pathophysiology of Parkinson's disease; for instance, it is known that CTR1 is decreased in substantia nigra pars compacta in Parkinson's disease and that a mutation in ATP7B could be associated with Parkinson's disease. Regarding copper-related therapies, copper supplementation can represent a plausible alternative, while copper chelation may even aggravate the pathology.

  10. Light-Induced Copper(II) Coordination by a Bicyclic Tetraaza Chelator through a Ligand-to-Metal Charge-Transfer Reaction

    DEFF Research Database (Denmark)

    Holm-Jørgensen, Jacob Rørdam; Jensen, Mikael; Bjerrum, Morten J.

    2011-01-01

    To enable utilization of the broad potential of copper isotopes in nuclear medicine, rapid and robust chelation of the copper is required. Bowl adamanzanes (bicyclic tetraaza ligands) can form kinetically stable copper complexes, but they are usually formed at low rates unless high pH values...

  11. Fluid inclusion and carbon oxygen isotope studies of Qiongbulake copper deposit in Awulale Mountains, Xinjiang%阿吾拉勒山琼布拉克铜矿床流体包裹体及碳氧同位素研究

    Institute of Scientific and Technical Information of China (English)

    罗勇; 廖思平; 杨武斌; 单强; 周昌平

    2011-01-01

    Located in Yining County of Xinjiang, the Qiongbulake copper deposit was formed in relation to magmatic hydrothermal fluids. These fluids formed a stockwork of calcite veinlets. The distribution of veins and fluid inclusions in these veins records the progressive pressure, temperature, and compositional evolution of the hydrothermal fluids that formed this copper deposit. This paper aims to characterize the temporal and spatial evolution of the mineralizing system and to understand the mechanism that controlled the accumulation of this large, massive Cu deposit. On the basis of the studies by means of inclusion petrography, microthermometry and carbon, oxygen stable isotope, the authors systematically studied characteristics of the ore-forming fluids and the origin of the Qiongbulake copper deposit. Three types of fluid inclusions in calcite were recognized, I.e., VLtype inclusions, Lva type inclusions and LVb type inclusions, with no CO2 phrase fluid inclusions and daughter phrase fluid inclusions. Fluid inclusions associated with calcite display moderate-low homogenization temperature (92.3~ 355.91C ), moderate-low salinities (ωCNaClep) 0.88% ~ 16.89%) and low density (0.62~1.04g/cm3). C and O isotope determinations of calcite show δ 13Cpdb values of - 7.37‰~-4.19‰ and δ Osmowvalues of 9.63‰ ~ 11.91‰, suggesting that the ore-forming fluids were derived from the mantle and volcanism. On the whole, the Qiongbulake copper deposit is a moderate-low hydrothermal ore deposit.%琼布拉克铜矿床位于新疆伊宁县境内,前人对该矿床的成因一直存在争议.文章通过对琼布拉克铜矿床方解石中的流体包裹体进行系统的岩相学、显微测温学和碳氧稳定同位素分析研究,探讨了成矿流体的来源及演化.研究表明:琼布拉克铜矿床的流体包裹体主要为气-液两相包裹体,另有少量的气相包裹体,未见富CO2和含子矿物的流体包裹体,显示出张性构造环境流

  12. Isotopic characteristics of S,Pb,H and O of Jiama copper-polymetallic ore deposit,Tibet and their significance%西藏甲玛铜多金属矿床S、Pb、H、O同位素特征及其指示意义

    Institute of Scientific and Technical Information of China (English)

    李永胜; 吕志成; 严光生; 甄世民; 杜泽忠

    2012-01-01

    西藏甲玛铜多金属矿床是中国近年来发现的特大型铜铅锌多金属矿床之一,其产出的环境和形成机理为国内外矿床学家所关注。对甲玛铜多金属矿床中代表性岩(矿)石样品进行了S、Pb、H和O同位素分析,并从成矿系统中"源"的角度对其变化规律和成因意义进行了探讨。研究结果表明,甲玛铜多金属矿床的围岩和矿石中δ34S值变化于-4.9‰~0.5‰,在硫同位素直方图上呈塔式分布,成矿热液δ34SΣS在0值附近,与矿区内斑岩体的δ34S组成(-0.2‰~-0.7‰)十分接近。表明了矿石中硫的来源单一,主要来源于岩浆。矿石铅同位素变化范围较大,明显分为两组:第一组样品富放射性成因铅,其206 Pb/204 Pb变化范围为18.603~18.752,207Pb/204Pb变化范围为15.610~15.686,208 Pb/204 Pb变化范围为38.910~39.135;第二组样品具有低放射性成因铅特征,其206 Pb/204 Pb变化范围为18.130~18.270,207 Pb/204 Pb变化范围为15.470~15.480,208Pb/204Pb变化范围为38.140~38.850。各同位素比值相对稳定,变化范围较小。将含矿斑岩的岩石铅与矿石铅进行综合投图,两种类型的铅并非单阶段正常铅,而是混合铅,有放射性成因铅的加入。可能存在不同的源区或在演化过程中有不同源区物质的混入。氢氧同位素研究结果显示,氢同位素的来源主要为深部的花岗岩体,而氧同位素由于后期大气降水增多、水/岩比值升高,导致含矿石英脉中δ18 OH2O降低。因此推断甲玛铜多金属矿床成矿流体早期以深源流体为主,随着成矿过程的演化,大气降水所占的比例也越来越大。%Jiama copper-polymetallic deposit,discovered in recent years,is one of the giant Cu-Pb-Zn polymetallic ore deposits in China.Its geological setting and metallogenic mechanism caused serious concern from the economic geologists.This paper analyzed S,Pb,H and O isotope of the representative rock

  13. [Copper pathology (author's transl)].

    Science.gov (United States)

    Mallet, B; Romette, J; Di Costanzo, J D

    1982-01-30

    Copper is an essential dietary component, being the coenzyme of many enzymes with oxidase activity, e.g. ceruloplasmin, superoxide dismutase, monoamine oxidase, etc. The metabolism of copper is complex and imperfectly known. Active transport of copper through the intestinal epithelial cells involves metallothionein, a protein rich in sulfhydryl groups which also binds the copper in excess and probably prevents absorption in toxic amounts. In hepatocytes a metallothionein facilitates absorption by a similar mechanism and regulates copper distribution in the liver: incorporation in an apoceruloplasmin, storage and synthesis of copper-dependent enzymes. Metallothioneins and ceruloplasmin are essential to adequate copper homeostasis. Apart from genetic disorders, diseases involving copper usually result from hypercupraemia of varied origin. Wilson's disease and Menkes' disease, although clinically and pathogenetically different, are both marked by low ceruloplasmin and copper serum levels. The excessive liver retention of copper in Wilson's disease might be due to increased avidity of hepatic metallothioneins for copper and decreased biliary excretion through lysosomal dysfunction. Menkes' disease might be due to low avidity of intestinal and hepatic metallothioneins for copper. The basic biochemical defect responsible for these two hereditary conditions has not yet been fully elucidated.

  14. 江西省兴源冲铜矿床同位素地球化学特征及成矿机制探讨%Carbon, oxygen and sulfur isotopic geochemistry and metallogenic mechanism of Xingyuanchong copper deposit in Jiangxi Province

    Institute of Scientific and Technical Information of China (English)

    刘婷; 刘成东; 严兆彬; 陈益平; 吴旭铃; 凡秀君

    2013-01-01

    The Xingyuanchong copper deposit of Huangmao area is located in the west segment of the South Jiuling large copper polymetallic ore concentration area.In combination with the metallogenic characteristics of the ore deposit,the authors mainly studied stable isotopes of the ores to probe into the sources of metallogenic materials and metallogenic mechanism of the deposit.δ13 CVPDB values of carbonates in this area vary in the range of -5.4‰~1.9‰,0.6‰ on average,whereas δ18OsMow values range from 9.0‰ to 13.8‰,10.9‰ on average,indicating that carbonates were mainly marine carbonates.The δ18O-δ13C diagram shows that carbon in the region probably came from the deep earth,and experienced metamorphism at high temperatures and alteration at low temperatures.Except two higher values of δ34S,most δ34S values in this deposit vary in the range of 1.0‰ ~6.2‰ ; in comparison with other similar deposits,sulfur of this deposit is characterized by submarine exhalation sedimentation and hydrothermal superimposition.In combination with isotopic data and geological setting,it is proposed that the ore-forming processes of the Xingyuanchong copper deposit could be divided into two stages.At the first stage,submarine volcanic sediments or protore layers were formed in Mesoproterozoic.At the second stage,the pre-existing protores were altered by the hydrothermal fluids and dynamic metamorphism mainly derived from Jinning orogenic period in Late Proterozoic.%兴源冲铜矿床地处九岭南缘铜多金属大型矿集区西段的黄茅地区.文章在成矿地质特征的基础上,通过对矿石进行稳定同位素地球化学研究,重点分析了成矿物质来源,探讨了矿床成矿机制.碳、氧同位素分析结果表明,矿区碳酸盐岩δ13 CVPDB为-5.4‰~ 1.9‰,平均为0.6‰,δ18 OSMOW变化范围为9.0‰~13.9‰,平均为10.9‰,主要为海相碳酸盐岩,碳、氧同位素图解表明碳可能主要来源于深部,且受高温变质作

  15. [Copper IUDs (author's transl)].

    Science.gov (United States)

    Thiery, M

    1983-10-01

    Following initial development of the Grafenberg ring in the 1920's, IUDs fell into disuse until the late 1950s, when plastic devices inserted using new technology began to gain worldwide acceptance. Further research indicated that copper had a significant antifertility effect which increased with increasing surface area, and several copper IUDs were developed and adapted, including the Copper T 200, the Copper T 220C, and the Copper T 380 A, probably the most effective yet. The Gravigard and Multiload are 2 other copper devices developed according to somewhat different principles. Copper devices are widely used not so much because of their great effectiveness as because of their suitability for nulliparous patients and their ease of insertion, which minimizes risk of uterine perforation. Records of 2584 women using Copper IUDs for 7190 women-years and 956 women using devices without copper for 6059 women-years suggest that the copper devices were associated with greater effectiveness and fewer removals for complications. Research suggests that the advantages of copper IUDs become more significant with increased duration of use. Contraindications to copper devices include allergy to copper and hepatolenticular degeneration. No carcinogenic or teratogenic effect of copper devices has been found, but further studies are needed to rule out other undesirable effects. Significant modifications of copper devices in recent years have been developed to increase their effectiveness, prolong their duration of usefulness, facilitate insertion and permit insertion during abortion or delivery. The upper limit of the surface area of copper associated with increased effectiveness appears to be between 200-300 sq mm, and at some point increases in copper exposure may provoke expulsion of the IUD. The duration of fertility inhibition of copper IUDs is usually estimated at 2-3 years, but recent research indicates that it may be 6-8 years, and some devices may retain copper surface

  16. Rapid lead isotope analysis of archaeological metals by multiple-collector inductively coupled plasma mass spectrometry

    DEFF Research Database (Denmark)

    Baker, J.A.; Stos, S.; Waight, Tod Earle

    2006-01-01

    Lead isotope ratios in archaeological silver and copper were determined by MC-ICPMS using laser ablation and bulk dissolution without lead purification. Laser ablation results on high-lead metals and bulk solution analyses on all samples agree within error of TIMS data, suggesting that problems...... from isobaric interferences and/or mass bias variations due to the presence of matrix elements are insignificant. Inaccurate laser ablation analyses on low-lead copper reflect erroneous mass bias corrections from use of a non-matrix matched standard. However, in most cases, silver and copper...... are analysable for lead isotopes by bulk dissolution or laser ablation MC-ICPMS with simplified sample preparation....

  17. Fluid inclusion and stable isotope studies of Nulasai copper deposit in Awulale Mountain, Xinjiang%新疆阿吾拉勒山奴拉赛铜矿床流体包裹体和稳定同位素研究

    Institute of Scientific and Technical Information of China (English)

    张贺; 刘敏; 赵军; 朱维娜

    2012-01-01

    阿吾拉勒铜矿成矿带是西天山重要的铜矿产地,奴拉赛铜矿床是成矿带内典型的铜矿床.在对奴拉赛铜矿床的地质特征研究的基础上,对流体包裹体和稳定同位素进行了研究.结果表明,流体包裹体均一温度变化于107~332℃,盐度介于0.7% ~19.5%,密度范围是0.94 g/cm3~1.13 g/cm3.矿石中金属硫化物δ 34 Sv-CDT变化范围较大,在-4.1‰~+8.5‰之间;重晶石δ345V-CDT在+13.9‰~+17.0‰之间.矿石中方解石的δ18OSMOW变化于+ 12.6‰~+16.3‰,δ13Cv-PDB在-10.1‰~-2.3‰之间.认为奴拉赛铜矿床属于中低温热液成因,而菲次生富集成矿,成矿过程为一期多阶段.流体混合是金属沉淀的主要机制,随着热液的演化,温度降低和氧逸度升高等多种因素耦合导致铜-硫络合物失稳而在断裂构造中沉淀出大量铜矿物.奴拉赛铜矿床与莫斯早特岩体在时间和空间上紧密相关,推测莫斯早特岩体为成矿提供了热源和主要物源.%The Awulale Mountain copper metallogenic belt is a major copper producing area in Western Tianshan, and the Nulasai copper deposit is a typical small-size copper deposit. The authors carried out a systematic study of the geological features as well as the origin and evolution of metallogenic fluids in the Nulasai copper deposit. Experimental results show that fluid inclusions have a homogenization temperature range of 107 ~ 332℃ , a salinity range of 0.7 % ~ 19.5 % , and a density range of 0.94 g/cm3 ~ 1.13 g/cm3. Δ34SV-COT of ore metal sul-fides range between - 4.1‰ and + 8.5‰, Δ34SV-CDT °f barites range between + 13.9‰ and + 17.0‰, δ18OSMow of ore calcite range between + 12.6‰ and + 16.3‰, and δ13CV-PDB vary between - 10.1‰ and - 2.3‰. Characteristics of ores, mineral phases, fluid inclusions and stable isotopes show that the Nulasai copper deposit belongs to middle-low temperature hydrothermal metallogeny, rather than secondary enrichment

  18. Medical applications of Cu, Zn, and S isotope effects.

    Science.gov (United States)

    Albarede, Francis; Télouk, Philippe; Balter, Vincent; Bondanese, Victor P; Albalat, Emmanuelle; Oger, Philippe; Bonaventura, Paola; Miossec, Pierre; Fujii, Toshiyuki

    2016-10-01

    This review examines recent applications of stable copper, zinc and sulfur isotopes to medical cases and notably cancer. The distribution of the natural stable isotopes of a particular element among coexisting molecular species varies as a function of the bond strength, the ionic charge, and the coordination, and it also changes with kinetics. Ab initio calculations show that compounds in which a metal binds to oxygen- (sulfate, phosphate, lactate) and nitrogen-bearing moieties (histidine) favor heavy isotopes, whereas bonds with sulfur (cysteine, methionine) favor light isotopes. Oxidized cations (e.g., Cu(ii)) and low coordination numbers are expected to favor heavy isotopes relative to their reduced counterparts (Cu(i)) and high coordination numbers. Here we discuss the first observations of Cu, Zn, and S isotopic variations, three elements closely related along multiple biological pathways, with emphasis on serum samples of healthy volunteers and of cancer patients. It was found that heavy isotopes of Zn and to an even greater extent Cu are enriched in erythrocytes relative to serum, while the difference is small for sulfur. Isotopic variations related to age and sex are relatively small. The (65)Cu/(63)Cu ratio in the serum of patients with colon, breast, and liver cancer is conspicuously low relative to healthy subjects. The characteristic time over which Cu isotopes may change with disease progression (a few weeks) is consistent with both the turnover time of the element and albumin half-life. A parallel effect on sulfur isotopes is detected in a few un-medicated patients. Copper in liver tumor tissue is isotopically heavy. In contrast, Zn in breast cancer tumors is isotopically lighter than in healthy breast tissue. (66)Zn/(64)Zn is very similar in the serum of cancer patients and in controls. Possible reasons for Cu isotope variations may be related to the cytosolic storage of Cu lactate (Warburg effect), release of intracellular copper from cysteine

  19. 西藏雄村斑岩型铜金矿集区Ⅰ号矿体的硫、铅同位素特征及其对成矿物质来源的指示%Sulfur and Lead Isotope Characteristics of No.Ⅰ Ore Body in the Xiongcun Porphyry Copper-Gold Ore Concentration Area of Tibet:Implications for the Source of Metals in the Ore Deposit

    Institute of Scientific and Technical Information of China (English)

    郎兴海; 唐菊兴; 李志军; 黄勇; 丁枫; 王成辉; 张丽; 周云

    2012-01-01

    The Xiongcun porphyry copper-gold ore concentration area, one of the large-size metallogenic areas discovered along the Gangdise porphyry copper belt, occurs in an island arc environment associated with northward intra-oceanic subduction of Neo-Tethys oceanic crust. The ore-forming age of the Xiongcun porphyry copper-gold ore concentration area is middle Jurassic. It is located in the middle of the southern margin of the Gangdise orogenic belt, and its south margin is Shigatse forearc basin. The latest exploration data indicate that there are several potential mineralization-alteration areas and three large-size copper-gold ore bodies (No. I, II and Ⅲ) in the Xiongcun porphyry copper-gold ore concentration area. In this paper, Xiongcun No. I ore body was chosen as the research object. According to sulfur and lead isotope composition of ore-baring porphyry, tuff and main sulfides of the ore, the authors have reached the following two conclusions: 1) Sulfur isotopic compositions vary in a narrow range of δ34S values from -3.5‰ to +2.7‰ (-1.07‰ on average) and are close to zero, indicating a mantle sulfur signature. 2) They have uniform Pb isotope compositions with low content of radiogenic Pb. The 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb ratios vary in the ranges of 18.104-18.432, 15.473-15.533 and 37.918-38.3072, respectively. They are located in the transition zone of mantle Pb and orogen Pb but are closer to the former, reflecting a mixing between the mantle material and minor crust material. Through a comparative study of sulfur and lead isotopes of porphyry copper deposits of the island arc environment (e.g., Xiongcun No. I ore body) and those of the collisional orogenic environment in the Gangdise porphyry copper belt, the authors found that they have similar metal sources, but porphyry copper deposits of the island arc environment have experienced weak contamination of crust materials, whereas porphyry copper deposits of the coilisional orogenic

  20. Application of a stable isotope technique to determine the simultaneous uptake of cadmium, copper, nickel, lead, and zinc by the water flea Daphnia magna from water and the green algae Pseudokirchneriella subcapitata.

    Science.gov (United States)

    Komjarova, Irina; Blust, Ronny

    2009-08-01

    Accumulation and toxicological effects of water and dietary metals in aquatic organisms can potentially be very different. Therefore, it is important to know the relative contribution of these different sources to metal exposure, availability, and accumulation. In the present study, a stable isotope technique was applied to investigate the uptake of Cd, Cu, Ni, Pb, and Zn by the green alga Pseudokirchneriella subcapitata and the water flea Daphnia magna during simultaneous exposure to the five metals at environmentally realistic concentrations from separate water and dietary routes. Green algae take up Cu faster compared to Cd, Ni, Pb, and Zn, and the distribution of metals between the external and internal compartments is dependent on metal and population growth stage. The metal accumulation reached a steady state within 24 to 48 h for all metals. Metal uptake rate constants from water were highest for Cu and lowest for Ni. Metal assimilation efficiencies from the food source varied with metal, ranging from approximately 80% in the case of Cd to near 0% in the case of Ni. Because the data for the different metals were obtained on the same multimetal-exposed organisms, the results are directly comparable among the metals. For all five metals studied, water appeared to be the most important route of uptake by D. magna.

  1. The Re-Os isotope system of the Xiongcun porphyry copper-gold deposit, Tibet%西藏雄村斑岩铜矿床辉钼矿Re-Os同位素体系

    Institute of Scientific and Technical Information of China (English)

    黄勇; 唐菊兴; 丁俊; 张丽; 郎兴海

    2013-01-01

    辉钼矿Re-Os同位素测年是现今研究斑岩铜矿成矿时限最有效的手段.本文通过开展冈底斯成矿带雄村斑岩铜金矿辉钼矿Re-Os同位素年代学研究,并结合前人已发表的数据,认为雄村斑岩铜金矿床成矿时限为171~175Ma.Ⅰ号矿体可能受到始新世大规模的岩浆活动扰动,辉钼矿在经历过后期热事件影响,在辉钼矿中形成有极微量富Re的K-硅酸盐矿物,Ⅰ号矿体辉钼矿Re含量比Ⅱ号矿体以及Ⅲ号矿体中辉钼矿Re含量高出1~4倍,其Re-Os同位素年龄比真实年龄偏低,不能完全代表成矿年龄.同时通过与冈底斯成矿带斑岩-矽卡岩铜钼矿床,钼/钼铜矿床的对比研究后发现,雄村斑岩铜金矿中辉钼矿Re含量比同一成矿带上中新世斑岩铜钼矿床中辉钼矿Re含量高出一个数量级,比古新世—始新世斑岩钼矿/钼铜矿床中辉钼矿Re含量高出两个数量级.辉钼矿Re含量变化特征与成矿物质的来源、钼的浓度、成矿母岩组分以及成矿期间的物理/化学条件有关.%Re-Os dating of molybdenite is an efficient means to restrict the time of mineralization. The age of mineralization of the Xiongcun porphyry copper-gold deposit is confined between 171 Ma and 175 Ma based on this study and other data available. No. Ⅰ ore body of the Xiongcun deposit was affected by later magmtic thermal event. Molybdenite contains trace K-Si silicate enriched in Re. As a result of this event, the Re content of molybdenite is one to four times higher than that of molybdenite in No.Ⅱ ore body and No. Ⅲ ore body, and the age of molybdenite in No. Ⅰ ore body is younger than the real age. The authors also compared the Re content of molybdenite between this deposit and other porphyry-skarn deposits within this belt and found that the content of Re shows systematic variation. The Re content of the Xiongcun porphyry copper-gold deposit is one order of magnitude high than that of Miocene

  2. Handling of Copper and Copper Oxide Nanoparticles by Astrocytes.

    Science.gov (United States)

    Bulcke, Felix; Dringen, Ralf

    2016-02-01

    Copper is an essential trace element for many important cellular functions. However, excess of copper can impair cellular functions by copper-induced oxidative stress. In brain, astrocytes are considered to play a prominent role in the copper homeostasis. In this short review we summarise the current knowledge on the molecular mechanisms which are involved in the handling of copper by astrocytes. Cultured astrocytes efficiently take up copper ions predominantly by the copper transporter Ctr1 and the divalent metal transporter DMT1. In addition, copper oxide nanoparticles are rapidly accumulated by astrocytes via endocytosis. Cultured astrocytes tolerate moderate increases in intracellular copper contents very well. However, if a given threshold of cellular copper content is exceeded after exposure to copper, accelerated production of reactive oxygen species and compromised cell viability are observed. Upon exposure to sub-toxic concentrations of copper ions or copper oxide nanoparticles, astrocytes increase their copper storage capacity by upregulating the cellular contents of glutathione and metallothioneins. In addition, cultured astrocytes have the capacity to export copper ions which is likely to involve the copper ATPase 7A. The ability of astrocytes to efficiently accumulate, store and export copper ions suggests that astrocytes have a key role in the distribution of copper in brain. Impairment of this astrocytic function may be involved in diseases which are connected with disturbances in brain copper metabolism.

  3. Study on isotope geochemistry compositions of the Baiyangping silver-copper polymetallic ore deposit area, Yunnan Province%云南白秧坪银铜多金属矿集区成矿流体的稳定同位素地球化学研究

    Institute of Scientific and Technical Information of China (English)

    邹志超; 胡瑞忠; 毕献武; 武丽艳; 冯彩霞; 唐永永

    2012-01-01

    白秧坪银铜多金属矿集区位于滇西兰坪中-新生代沉积盆地中北部,由东矿带(上三叠统碳酸盐岩建造内的铅锌银铜矿床)和西矿带(下白垩统碎屑岩建造内的银铜钴铅锌矿床)两部分组成.本研究对该矿集区东、西矿带不同矿段、不同矿化类型矿石样品进行了硫-碳-氧同位素的研究.硫同位素研究表明,东矿带硫主要为地层硫,西矿带热液硫为沉积地层硫、有机硫及深源硫或地幔硫的混合.碳同位素显示,东矿带碳酸盐矿物δ13CPDB值为-3.0‰~+3.1‰,接近于海相碳酸盐,明显区别于其他各类地质体,暗示成矿流体的碳应来自碳酸盐岩;西矿带各矿段的δ13CpDB值变化范围小,除白秧坪少量样品外,其余均为负值(-5.1‰~-1.5‰),表明该区热液流体中碳的来源复杂,存在有机碳、地壳碳酸盐的碳及深源(地幔)碳.综合分析表明,西矿带成矿流体是一种混入深源流体的盆地热卤水,形成了下白垩统碎屑岩建造内的银铜钴铅锌矿床;东矿带成矿流体则是源于大气降水的盆地热卤水,形成了上三叠统碳酸盐岩建造内的铅锌银铜矿床.%Baiyangping silver-copper polymetallic ore-concentration area were developed on the northern border of the Lanping Basin, Yunnan Province. S-C-O isotopic compositions were analyzed to trace sources of ore-forming materials of the eastern ore-belt (limestone and dolomite of Upper Triassic Sanhedong Formation) and the western ore-belt (sandstone and fine-grained sandstone of Lower Cretaceous Jingxing Formation). Sulfur isotope analysis shows that the reduced sulfur of the eastern ore-belt mainly comes from the strata sulfate. The sulfur in the western ore-belt is derived from deep-seated mantle sufur mixed by crustal sufur. C and O isotopic analyses of silver-copper polymetallic ore concentration area show that the δ13CPDB values range from -3.0‰ to +3.1‰ in hydrothermal minerals such as calcite and

  4. 新疆阿吾拉勒山西段穷布拉克铜矿床流体包裹体和碳氧硫同位素研究%Fluid inclusion and stable isotope studies of the Qiongbulake copper deposit in Western Awulale Mountain,Xinjiang

    Institute of Scientific and Technical Information of China (English)

    赵军; 张作衡; 张贺; 刘敏; 朱维娜

    2012-01-01

    穷布拉克铜矿床是新疆阿吾拉勒铁铜成矿带西段规模最大的一个铜矿床.本文对该矿床Ⅰ号矿体3种矿石中的方解石脉开展了流体包裹体和稳定同位素研究,结果表明:3种矿石的包裹体均为气液两相包裹体,流体体系为NaCl-H2O体系.包裹体的均一温度为85~343℃,盐度范围为(1.57~17.79) wt%NaCl eq.,密度为0.7~1.05 g/cm3.方解石的δ 13C值为-3.2‰~-6.5‰,平均-4.08‰,显示出幔源的特征.成矿流体的δ18O值为0.45‰~4.44‰.硫化物δ 34S值变化范围较大,为-10.5‰~5.5‰.Ⅰ号矿体与矿区内的火山热液型矿体具有相似的流体包裹体和稳定同位素特征,沉积特征不明显,并非沉积-改造型,与其他矿体具有相同的成因类型.成矿流体由火山热液和参与了水-岩反应的大气水两种流体混合而成,以火山热液占主导地位.矿物沉淀主要与流体混合后缓慢降温有关,但混合后的稀释作用以及水-岩反应导致pH值升高可能也起到了一定作用.%The Qiongbulake copper deposit is the largest deposit in western Awulale Mountain copper belt of Xinjiang. Three ore types from No.l ore body were selected for fluid inclusion and stable isotope studies. The results reveal that all the fluid inclusions are of L—V type and NaCl—H2O system. Fluid inclusions associated with calcite display moderate—low homogenization temperatures (85℃~343cG),moderate — low salinities (1.57~17.79 wt%NaCl eq.) and low densities (0.7g/cm3~1.05 g/cm3). The petrographic characteristics of the fluid inclusions in the three ore types are similar to each other, whereas some differences do exist for the homogenization temperatures and alkalinities. Carbon isotope determinations of calcite show δ13 CPDB values of —3.2‰—6.5‰, suggesting that the carbon was derived from the mantle. Oxygen isotope determinations of the fluids show δ 18OSmow values of 0.45%o~4.44%o. Sulfur isotope

  5. Canine models of copper toxicosis for understanding mammalian copper metabolism

    OpenAIRE

    Fieten, Hille; Leegwater, Peter A. J.; Watson, Adrian L.; Rothuizen, Jan

    2011-01-01

    Hereditary forms of copper toxicosis exist in man and dogs. In man, Wilson’s disease is the best studied disorder of copper overload, resulting from mutations in the gene coding for the copper transporter ATP7B. Forms of copper toxicosis for which no causal gene is known yet are recognized as well, often in young children. Although advances have been made in unraveling the genetic background of disorders of copper metabolism in man, many questions regarding disease mechanisms and copper homeo...

  6. Hair copper in intrauterine copper device users.

    Science.gov (United States)

    Thiery, M; Heyndrickx, A; Uyttersprot, C

    1984-03-01

    The antifertility effect of copper-bearing IUDs is based on continuous release of copper, which is a result of the reaction between the metal and the uterine secretions. Released cupric ions collect in the endometrium and in the uterine fluid but significant accumulation has not been found in the bloodstream or elsewhere. Following Laker's suggestion that hair be used for monitoring essential trace elements, e.g., copper, we checked the copper content of the hair of women wearing copper-bearing IUDs. Samples of untreated pubic hair removed by clipping before diagnostic curettage were obtained from 10 young (24-34 years old), white caucasian females who until then had been wearing an MLCu250 IUD for more than 1 year. Pubes from 10 comparable (sex, age, race) subjects who had never used a Cu-containing device served as controls. The unwashed material was submitted to the toxicology laboratory, where the copper content was assessed by flameless atomic absorption, a technique whose lower limit of measurement lies at a concentration of 0.05 mcg Cu/ml fluid (50 ppb). Hair samples were washed to remove extraneous traces of metal according to the prescriptions of the International Atomic Energy Agency, weighed, and mineralized, after which a small volume (10 mcl) of the diluted fluid was fed into the graphite furnace. Each sample (75-150 mg) was analyzed 4 times, both before and after washing. Since the cleaning procedure reduces the weight of the sample (mainly by the removal of fat, dust, etc.) this explains why the percentage copper content of washed hair is higher than that of unwashed hair belonging to the same subject. The results indicate that there was no significant difference (Mann-Whitney U test) between the mean copper levels of both unwashed and washed pubes from women who were using or had never used an MLCu250 IUD. We therefore conclude that the use of this copper-containing device is not associated with significant accumulation of copper in (pubic) hair.

  7. China Copper Processing Industry Focus

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>1. Market Consumption The ’China Factor’ and Copper Price Fluctuation We all know China is an enormous consumer of copper,but the exact levels of consumption and where the copper has gone remains a mystery.

  8. Biogenic nanoparticles: copper, copper oxides, copper sulphides, complex copper nanostructures and their applications.

    Science.gov (United States)

    Rubilar, Olga; Rai, Mahendra; Tortella, Gonzalo; Diez, Maria Cristina; Seabra, Amedea B; Durán, Nelson

    2013-09-01

    Copper nanoparticles have been the focus of intensive study due to their potential applications in diverse fields including biomedicine, electronics, and optics. Copper-based nanostructured materials have been used in conductive films, lubrification, nanofluids, catalysis, and also as potent antimicrobial agent. The biogenic synthesis of metallic nanostructured nanoparticles is considered to be a green and eco-friendly technology since neither harmful chemicals nor high temperatures are involved in the process. The present review discusses the synthesis of copper nanostructured nanoparticles by bacteria, fungi, and plant extracts, showing that biogenic synthesis is an economically feasible, simple and non-polluting process. Applications for biogenic copper nanoparticles are also discussed.

  9. Stable isotope studies

    Energy Technology Data Exchange (ETDEWEB)

    Ishida, T.

    1992-01-01

    The research has been in four general areas: (1) correlation of isotope effects with molecular forces and molecular structures, (2) correlation of zero-point energy and its isotope effects with molecular structure and molecular forces, (3) vapor pressure isotope effects, and (4) fractionation of stable isotopes. 73 refs, 38 figs, 29 tabs.

  10. Garnets in porphyry-skarn systems: A LA-ICP-MS, fluid inclusion, and stable isotope study of garnets from the Hongniu-Hongshan copper deposit, Zhongdian area, NW Yunnan Province, China

    Science.gov (United States)

    Peng, Hui-juan; Zhang, Chang-qing; Mao, Jing-wen; Santosh, M.; Zhou, Yun-man; Hou, Lin

    2015-05-01

    The Late Cretaceous Hongniu-Hongshan porphyry-skarn copper deposit is located in the Zhongdian area of northwestern Yunnan Province, China. Garnets from the deposit have compositions that range from Adr14Grs86 to almost pure andradite (Adr98Grs2) and display two different styles of zoning. The garnets are predominantly of magmatic-hydrothermal origin, as is evidenced by their 18Ofluid (5.4-6.9‰) and low Dfluid (-142‰ to -100‰) values, both of which likely result from late-stage magmatic open-system degassing. Three generations of garnet have been identified in this deposit: (1) Al-rich garnets (Grt I; Adr22-57Grs78-43) are anisotropic, have sector dodecahedral twinning, are slightly enriched in light rare earth elements (LREEs) compared with the heavy rare earth elements (HREEs), have negative or negligible Eu anomalies, and contain high concentrations of F. Fluid inclusions within these Al-rich garnets generally have salinities of 12-39 wt.% NaCl eq. and have liquid-vapor homogenization temperatures (Th) of 272-331 °C. The Grt I are most likely associated with low- to medium-salinity fluids that were generated by the contraction of an ascending vapor phase and that formed during diffusive metasomatism caused by pore fluids equilibrating with the host rocks at low W/R (water/rock) ratios. These garnets formed as a result of the high F activity of the system, which increased the solubility of Al within the magmato-hydrothermal fluids in the system. (2) Fe-rich garnets (Adr75-98Grs25-2) have trapezohedral faces, and are both anisotropic with oscillatory zoning and isotropic. These second-generation Fe-rich garnets (Grt II) have high ΣREE concentrations, are LREE-enriched and HREE-depleted, and generally have positive but variable Eu anomalies. All of the Fe-rich garnets contain high-salinity fluid inclusions with multiple daughter minerals with salinities of 33-80 wt.% NaCl eq. Some of them show higher temperatures of halite dissolution (465-591 °C) than

  11. Spatial and temporal zoning of hydrothermal alteration and mineralization in the Sossego iron oxide-copper-gold deposit, Carajás Mineral Province, Brazil: Paragenesis and stable isotope constraints

    Science.gov (United States)

    Monteiro, Lena V.S.; Xavier, R.P.; Carvalho, E.R.; Hitzman, M.W.; Johnson, C.A.; Souza, Filho C.R.; Torresi, I.

    2008-01-01

    subsidiary siegenite, and millerite. Pyrrhotite and pyrite are minor constituents of ore in the Sequerinho orebodies while pyrite is relatively abundant in the Sossego–Curral bodies. Oxygen isotope partitioning between mineral pairs constrains temperatures in the deposit spatially and through time. In the Sequeirinho orebody, the early sodic–calcic alteration stage was characterized by temperatures exceeding 500°C and δ18OH2O values for the alteration fluid of 6.9 ± 0.9‰. Temperature declines outward and upward from the zone of most intense alteration. Paragenetically later copper–gold mineralization displays markedly lower temperatures (<300°C) and was characterized by the introduction of 18O-depleted hydrothermal fluids −1.8 ± 3.4‰. The calculated δDH2O and δ18OH2O values suggest that the fluids that formed the early calcic–sodic alteration assemblage were of formational/metamorphic or magmatic origin. The decrease of δ18OH2O values through time may reflect influx of surficially derived waters during later alteration and mineralization events. Influx of such fluids could be related to episodic fluid overpressure, resulting in dilution and cooling of the metalliferous fluid, causing deposition of metals transported as metal chloride complexes.

  12. Re-partitioning of Cu and Zn isotopes by modified protein expression

    Directory of Open Access Journals (Sweden)

    Ragnarsdottir K Vala

    2008-10-01

    Full Text Available Abstract Cu and Zn have naturally occurring non radioactive isotopes, and their isotopic systematics in a biological context are poorly understood. In this study we used double focussing mass spectroscopy to determine the ratios for these isotopes for the first time in mouse brain. The Cu and Zn isotope ratios for four strains of wild-type mice showed no significant difference (δ65Cu -0.12 to -0.78 permil; δ66Zn -0.23 to -0.48 permil. We also looked at how altering the expression of a single copper binding protein, the prion protein (PrP, alters the isotope ratios. Both knockout and overexpression of PrP had no significant effect on the ratio of Cu isotopes. Mice brains expressing mutant PrP lacking the known metal binding domain have δ65Cu isotope values of on average 0.57 permil higher than wild-type mouse brains. This implies that loss of the copper binding domain of PrP increases the level of 65Cu in the brain. δ66Zn isotope values of the transgenic mouse brains are enriched for 66Zn to the wild-type mouse brains. Here we show for the first time that the expression of a single protein can alter the partitioning of metal isotopes in mouse brains. The results imply that the expression of the prion protein can alter cellular Cu isotope content.

  13. Copper and silver halates

    CERN Document Server

    Woolley, EM; Salomon, M

    2013-01-01

    Copper and Silver Halates is the third in a series of four volumes on inorganic metal halates. This volume presents critical evaluations and compilations for halate solubilities of the Group II metals. The solubility data included in this volume are those for the five compounds, copper chlorate and iodate, and silver chlorate, bromate and iodate.

  14. Coping with copper

    DEFF Research Database (Denmark)

    Nunes, Ines; Jacquiod, Samuel; Brejnrod, Asker

    2016-01-01

    Copper has been intensively used in industry and agriculture since mid-18(th) century and is currently accumulating in soils. We investigated the diversity of potential active bacteria by 16S rRNA gene transcript amplicon sequencing in a temperate grassland soil subjected to century-long exposure......, suggesting a potential promising role as bioindicators of copper contamination in soils....

  15. Kunpeng Copper:The largest Copper Smelting Company of Sichuan

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>On September 9,Liangshan Mining Company’s 100,000 tons/year cathode copper project kicked off.It is another key project of the company following the successful launch of the 100,000 tons/year anode copper project.Based on ISA copper smelting technology of the largest open-cast copper mine in southwest China,

  16. Cosmogenic activation of xenon and copper

    Energy Technology Data Exchange (ETDEWEB)

    Baudis, Laura; Kish, Alexander; Piastra, Francesco [University of Zuerich, Department of Physics, Zuerich (Switzerland); Schumann, Marc [University of Bern, Albert Einstein Center for Fundamental Physics, Bern (Switzerland)

    2015-10-15

    Rare event search experiments using liquid xenon as target and detection medium require ultra-low background levels to fully exploit their physics potential. Cosmic ray induced activation of the detector components and, even more importantly, of the xenon itself during production, transportation and storage at the Earth's surface, might result in the production of radioactive isotopes with long half-lives, with a possible impact on the expected background. We present the first dedicated study on the cosmogenic activation of xenon after 345 days of exposure to cosmic rays at the Jungfraujoch research station at 3470 m above sea level, complemented by a study of copper which has been activated simultaneously. We have directly observed the production of {sup 7}Be, {sup 101}Rh, {sup 125}Sb, {sup 126}I and {sup 127}Xe in xenon, out of which only {sup 125}Sb could potentially lead to background for a multi-ton scale dark matter search. The production rates for five out of eight studied radioactive isotopes in copper are in agreement with the only existing dedicated activation measurement, while we observe lower rates for the remaining ones. The specific saturation activities for both samples are also compared to predictions obtained with commonly used software packages, where we observe some underpredictions, especially for xenon activation. (orig.)

  17. Cosmogenic activation of xenon and copper

    CERN Document Server

    Baudis, Laura; Piastra, Francesco; Schumann, Marc

    2015-01-01

    Rare event search experiments using liquid xenon as target and detection medium require ultra-low background levels to fully exploit their physics potential. Cosmic ray induced activation of the detector components and, even more importantly, of the xenon itself during production, transportation and storage at the Earth's surface, might result in the production of radioactive isotopes with long half-lives, with a possible impact on the expected background. We present the first dedicated study on the cosmogenic activation of xenon after 345 days of exposure to cosmic rays at the Jungfraujoch research station at 3470m above sea level, complemented by a study of copper which has been activated simultaneously. We have directly observed the production of 7Be, 101Rh, 125Sb, 126I and 127Xe in xenon, out of which only 125Sb could potentially lead to background for a multi-ton scale dark matter search. The production rates for five out of eight studied radioactive isotopes in copper are in agreement with the only exis...

  18. Posttranslational regulation of copper transporters

    NARCIS (Netherlands)

    van den Berghe, P.V.E.

    2009-01-01

    The transition metal copper is an essential cofactor for many redox-active enzymes, but excessive copper can generate toxic reactive oxygen species. Copper homeostasis is maintained by highly conserved proteins, to balance copper uptake, distribution and export on the systemic and cellular level. Th

  19. Fabricating Copper Nanotubes by Electrodeposition

    Science.gov (United States)

    Yang, E. H.; Ramsey, Christopher; Bae, Youngsam; Choi, Daniel

    2009-01-01

    Copper tubes having diameters between about 100 and about 200 nm have been fabricated by electrodeposition of copper into the pores of alumina nanopore membranes. Copper nanotubes are under consideration as alternatives to copper nanorods and nanowires for applications involving thermal and/or electrical contacts, wherein the greater specific areas of nanotubes could afford lower effective thermal and/or electrical resistivities. Heretofore, copper nanorods and nanowires have been fabricated by a combination of electrodeposition and a conventional expensive lithographic process. The present electrodeposition-based process for fabricating copper nanotubes costs less and enables production of copper nanotubes at greater rate.

  20. [Copper and the human body].

    Science.gov (United States)

    Krízek, M; Senft, V; Motán, J

    1997-11-19

    Copper is one of the essential trace elements. It is part of a number of enzymes. Deficiency of the element is manifested by impaired haematopoesis, bone metabolism, disorders of the digestive, cardiovascular and nervous system. Deficiency occurs in particular in patients suffering from malnutrition, malabsorption, great copper losses during administration of penicillamine. Sporadically copper intoxications are described (suicidal intentions or accidental ingestion of beverages with a high copper content). Acute exposure to copper containing dust is manifested by metal fume fever. Copper salts can produce local inflammations. Wilson's disease is associated with inborn impaired copper metabolism. In dialyzed patients possible contaminations of the dialyzate with copper must be foreseen as well as the possible release of copper from some dialyzation membranes. With the increasing amount of copper in the environment it is essential to monitor the contamination of the environment.

  1. Geochemistry, geochronology, mineralogy, and geology suggest sources of and controls on mineral systems in the southern Toquima Range, Nye County, Nevada; with geochemistry maps of gold, silver, mercury, arsenic, antimony, zinc, copper, lead, molybdenum, bismuth, iron, titanium, vanadium, cobalt, beryllium, boron, fluorine, and sulfur; and with a section on lead associations, mineralogy and paragenesis, and isotopes

    Science.gov (United States)

    Shawe, Daniel R.; Hoffman, James D.; Doe, Bruce R.; Foord, Eugene E.; Stein, Holly J.; Ayuso, Robert A.

    2003-01-01

    Geochemistry maps showing the distribution and abundance of 18 elements in about 1,400 rock samples, both mineralized and unmineralized, from the southern Toquima Range, Nev., indicate major structural and lithologic controls on mineralization, and suggest sources of the elements. Radiometric age data, lead mineralogy and paragenesis data, and lead-isotope data supplement the geochemical and geologic data, providing further insight into timing, sources, and controls on mineralization. Major zones of mineralization are centered on structural margins of calderas and principal northwest-striking fault zones, as at Round Mountain, Manhattan, and Jefferson mining districts, and on intersections of low-angle and steep structures, as at Belmont mining district. Paleozoic sedimentary rocks, mostly limestones (at Manhattan, Jefferson, and Belmont districts), and porous Oligocene ash-flow tuffs (at Round Mountain district) host the major deposits, although all rock types have been mineralized as evidenced by numerous prospects throughout the area. Principal mineral systems are gold-silver at Round Mountain where about 7 million ounces of gold and more than 4 million ounces of silver has been produced; gold at Gold Hill in the west part of the Manhattan district where about a half million ounces of gold has been produced; gold-mercury-arsenic-antimony in the east (White Caps) part of the Manhattan district where a few hundred thousand ounces of gold has been produced; and silver-lead-antimony at Belmont where more than 150,000 ounces of silver has been produced. Lesser amounts of gold and silver have been produced from the Jefferson district and from scattered mines elsewhere in the southern Toquima Range. A small amount of tungsten was produced from mines in the granite of the Round Mountain pluton exposed east of Round Mountain, and small amounts of arsenic, antimony, and mercury have been produced elsewhere in the southern Toquima Range. All elements show unique

  2. Targeting copper in cancer therapy: 'Copper That Cancer'.

    Science.gov (United States)

    Denoyer, Delphine; Masaldan, Shashank; La Fontaine, Sharon; Cater, Michael A

    2015-11-01

    Copper is an essential micronutrient involved in fundamental life processes that are conserved throughout all forms of life. The ability of copper to catalyze oxidation-reduction (redox) reactions, which can inadvertently lead to the production of reactive oxygen species (ROS), necessitates the tight homeostatic regulation of copper within the body. Many cancer types exhibit increased intratumoral copper and/or altered systemic copper distribution. The realization that copper serves as a limiting factor for multiple aspects of tumor progression, including growth, angiogenesis and metastasis, has prompted the development of copper-specific chelators as therapies to inhibit these processes. Another therapeutic approach utilizes specific ionophores that deliver copper to cells to increase intracellular copper levels. The therapeutic window between normal and cancerous cells when intracellular copper is forcibly increased, is the premise for the development of copper-ionophores endowed with anticancer properties. Also under investigation is the use of copper to replace platinum in coordination complexes currently used as mainstream chemotherapies. In comparison to platinum-based drugs, these promising copper coordination complexes may be more potent anticancer agents, with reduced toxicity toward normal cells and they may potentially circumvent the chemoresistance associated with recurrent platinum treatment. In addition, cancerous cells can adapt their copper homeostatic mechanisms to acquire resistance to conventional platinum-based drugs and certain copper coordination complexes can re-sensitize cancer cells to these drugs. This review will outline the biological importance of copper and copper homeostasis in mammalian cells, followed by a discussion of our current understanding of copper dysregulation in cancer, and the recent therapeutic advances using copper coordination complexes as anticancer agents.

  3. The Proterozoic VMS Copper Deposit in Longmen Mountain Area of Chuanxi:Evidence from Sulphide Trace Element and Sulfur Isotope%川西龙门山地区元古代VMS铜矿床:硫化物微量元素和硫同位素证据

    Institute of Scientific and Technical Information of China (English)

    杨钻云; 邱仁轩; 秦术凯; 仲世新; 张羽洋

    2009-01-01

    A series of blocklike pyritic copper deposits are developed in the epimetamorphic athrogenic rock in Longmen Mountain of Chuanxi area(western Sichuan),where ore-bearing rocks are formed in island arc tectonic environment. The pyrite amounts to nearly 90% of whole metallic minerals, with the content of chalcopyrite varing from 0.8% to 3% and sphalerite from 1%-4%. The main elements of mineral are Fe, S,Z, Cu, and Mn, and sub-elements are Ag, Au, Pb, Se, Cd, Ga, Ti, V, Co, etc. The ratio of δ(34S) spreading each layer ranges from -1.5‰ to +15.9‰ with the average occupation +7.6‰ and the ratio of 32S/34S 22. It can be concluded from the finding above that the elements are mainly sourced the deep earth's crust, about the subduction area of the oceanic crust.The main metallic sulphide and its trace elements and sulfur isotope formation character show that the mineral belongs to massive sulfide deposit formed by volcano--the VSM.%川西龙门山地区元古宙变质火山碎屑岩系中发育一系列块状黄铁矿型铜矿床,含矿围岩形成于岛弧构造环境.矿石中黄铁矿占金属矿物总质量分数的90%左右,黄铜矿质量分数为0.8%~3.0%,闪锌矿为1%~4%.矿石主要元素为Fe、S、Zn、Cu、Mn等,其次为Ag、Au、Pb、Se、Cd、Ga、Ti、V、Co等元素,全区各矿层矿石中δ(34S)分布范围为 -1.5‰~+15.9‰,平均为 +7.6‰,N(32S)/N(34S)值为22,据此推断成矿物质应来自地壳深部,与洋壳俯冲作用有关.主要金属硫化物及其微量元素和硫同位素组成特征表明矿床类型为火山成因块状硫化物矿床,即VMS矿床.

  4. METHOD OF ISOTOPE CONCENTRATION

    Science.gov (United States)

    Spevack, J.S.

    1957-04-01

    An isotope concentration process is described which consists of exchanging, at two or more different temperature stages, two isotopes of an element between substances that are physically separate from each other and each of which is capable of containing either of the isotopes, and withdrawing from a point between at least two of the temperatare stages one of the substances containing an increased concentration of the desired isotope.

  5. Genesis of Yangla Banded Skarn-Hosted Copper Deposit in Tethys Orogenic Belt of Southwestern China

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Yangla copper deposit is the largest banded skarn-hosted copper deposit found recently in the Tethys orogenic belt of Southwestern China. On the basis of the study of distribution, petrology and mineralogy as well as major element, REE and isotope geochemistry, the authors find that the banded skarn, which hosts the deposit, was precipitated from hydrothermal solutions in the form of exhalate sediment. Therefore, the banded skarn-hosted copper deposit is a Sedex-type deposit, with a series of stacked, conformable lenses underlain by at least one stringer zone. The deposit, intercalated at the contact of lower clastic rock and upper carbonate rock of Gajinxueshan Group, was formed in the Carboniferous ((296.1±7.0) Ma), contemporary to the host Gajinxueshan Group. The interpretation of the genesis of Yangla banded skarn-hosted copper deposit is of fundamental exploration significance for the discovery of Sedex-type copper deposit in the region.

  6. Statistical clumped isotope signatures

    NARCIS (Netherlands)

    Röckmann, T.; Popa, M. E.; Krol, M. C.; Hofmann, M. E. G.

    2016-01-01

    High precision measurements of molecules containing more than one heavy isotope may provide novel constraints on element cycles in nature. These so-called clumped isotope signatures are reported relative to the random (stochastic) distribution of heavy isotopes over all available isotopocules of a m

  7. LEP copper accelerating cavities

    CERN Multimedia

    Laurent Guiraud

    1999-01-01

    These copper cavities were used to generate the radio frequency electric field that was used to accelerate electrons and positrons around the 27-km Large Electron-Positron (LEP) collider at CERN, which ran from 1989 to 2000. The copper cavities were gradually replaced from 1996 with new superconducting cavities allowing the collision energy to rise from 90 GeV to 200 GeV by mid-1999.

  8. Copper wire bonding

    CERN Document Server

    Chauhan, Preeti S; Zhong, ZhaoWei; Pecht, Michael G

    2014-01-01

    This critical volume provides an in-depth presentation of copper wire bonding technologies, processes and equipment, along with the economic benefits and risks.  Due to the increasing cost of materials used to make electronic components, the electronics industry has been rapidly moving from high cost gold to significantly lower cost copper as a wire bonding material.  However, copper wire bonding has several process and reliability concerns due to its material properties.  Copper Wire Bonding book lays out the challenges involved in replacing gold with copper as a wire bond material, and includes the bonding process changes—bond force, electric flame off, current and ultrasonic energy optimization, and bonding tools and equipment changes for first and second bond formation.  In addition, the bond–pad metallurgies and the use of bare and palladium-coated copper wires on aluminum are presented, and gold, nickel and palladium surface finishes are discussed.  The book also discusses best practices and re...

  9. Generation of Radixenon Isotopes

    Energy Technology Data Exchange (ETDEWEB)

    McIntyre, Justin I.; Bowyer, Ted W.; Hayes, James C.; Heimbigner, Tom R.; Morris, Scott J.; Panisko, Mark E.; Pitts, W. K.; Pratt, Sharon L.; Reeder, Paul L.; Thomas, Charles W.

    2003-06-30

    Pacific Northwest National Laboratory has developed an automated system for separating Xe from air and can detect the following radioxenon isotopes, 131mXe, 133mXe, 133Xe, and 135Xe. This report details the techniques used to generate the various radioxenon isotopes that are used for the calibration of the detector as well as other isotopes that have the potential to interfere with the fission produced radioxenon isotopes. Fission production is covered first using highly enriched uranium followed by a description and results from an experiment to produce radioxenon isotopes from neutron activation of ambient xenon.

  10. Isotopes in heterogeneous catalysis

    CERN Document Server

    Hargreaves, Justin SJ

    2006-01-01

    The purpose of this book is to review the current, state-of-the-art application of isotopic methods to the field of heterogeneous catalysis. Isotopic studies are arguably the ultimate technique in in situ methods for heterogeneous catalysis. In this review volume, chapters have been contributed by experts in the field and the coverage includes both the application of specific isotopes - Deuterium, Tritium, Carbon-14, Sulfur-35 and Oxygen-18 - as well as isotopic techniques - determination of surface mobility, steady state transient isotope kinetic analysis, and positron emission profiling.

  11. Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2015-01-01

    Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

  12. Multi-frequency, multi-technique pulsed EPR investigation of the copper binding site of murine amyloid β peptide.

    Science.gov (United States)

    Kim, Donghun; Bang, Jeong Kyu; Kim, Sun Hee

    2015-01-26

    Copper-amyloid peptides are proposed to be the cause of Alzheimer's disease, presumably by oxidative stress. However, mice do not produce amyloid plaques and thus do not suffer from Alzheimer's disease. Although much effort has been focused on the structural characterization of the copper- human amyloid peptides, little is known regarding the copper-binding mode in murine amyloid peptides. Thus, we investigated the structure of copper-murine amyloid peptides through multi-frequency, multi-technique pulsed EPR spectroscopy in conjunction with specific isotope labeling. Based on our pulsed EPR results, we found that Ala2, Glu3, His6, and His14 are directly coordinated with the copper ion in murine amyloid β peptides at pH 8.5. This is the first detailed structural characterization of the copper-binding mode in murine amyloid β peptides. This work may advance the knowledge required for developing inhibitors of Alzheimer's disease.

  13. Copper and Copper Proteins in Parkinson’s Disease

    OpenAIRE

    Sergio Montes; Susana Rivera-Mancia; Araceli Diaz-Ruiz; Luis Tristan-Lopez; Camilo Rios

    2014-01-01

    Copper is a transition metal that has been linked to pathological and beneficial effects in neurodegenerative diseases. In Parkinson's disease, free copper is related to increased oxidative stress, alpha-synuclein oligomerization, and Lewy body formation. Decreased copper along with increased iron has been found in substantia nigra and caudate nucleus of Parkinson's disease patients. Copper influences iron content in the brain through ferroxidase ceruloplasmin activity; therefore decreased pr...

  14. Hydrogen isotopes transport parameters in fusion reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    Serra, E. [Politecnico di Torino (Italy). Dipartimento di Energetica; Benamati, G. [ENEA Fusion Division, CR Brasimone, 40032 Camungnano, Bologna (Italy); Ogorodnikova, O.V. [Moscow State Engineering Physics Institute, Moscow 115409 (Russian Federation)

    1998-06-01

    This work presents a review of hydrogen isotopes-materials interactions in various materials of interest for fusion reactors. The relevant parameters cover mainly diffusivity, solubility, trap concentration and energy difference between trap and solution sites. The list of materials includes the martensitic steels (MANET, Batman and F82H-mod.), beryllium, aluminium, beryllium oxide, aluminium oxide, copper, tungsten and molybdenum. Some experimental work on the parameters that describe the surface effects is also mentioned. (orig.) 62 refs.

  15. Fluid Inclusions, Zircon U-Pb Age and Hf Isotope of Tongkuangyu Copper Deposit in Zhongtiaoshan Mountains and Its Geological Significance, Shanxi Province, China%山西中条山铜矿峪铜矿流体包裹体、锆石U-Pb年龄、Hf同位素及其地质意义

    Institute of Scientific and Technical Information of China (English)

    许庆林; 孙丰月; 张晗; 霍亮

    2012-01-01

    Tongkuangyu copper deposit is located in the Zhongtiaoshan Mountains,the southern margin of the central belt of North China craton.The main purpose of this paper is to study the evolution of ore-forming fluid,mineralizing age and the genetic type of Tongkuangyu copper deposit by means of zircon U-Pb chronology,Hf isotope and fluid inclusions microthermometry research.The research indicates that the fluid inclusions can be divided into two types:vapor and liquid two phases inclusions and daughter mineral bearing poly-phases inclusions.The ore-forming fluid was magmatic fluid with high temperature (540-620 ℃) and high salinity (47.6%-70.9%) in the early stage.In the middle stage,the characteristics of fluid became medium-high temperature (440-520 ℃) and high salinity (30.5%-44.3%),and the metallogenic material precipitated substantially,owing to decompression boiling,temperature cooling,volatile losing and oxygen fugacity reducing etc.Then,the characteristics of fluid became low temperature (140-240 ℃) with medium-low salinity (16.5%-27.1%) in the late stage.In the first and middle stages,two types of inclusions closely coexisted,and the salinity of them has large differences,but the homogenization temperature is approximate,which implicating that the fluid had experienced boiling.The mineralizing pressure is 24-36 MPa,and the corresponding mineralizing depth is 2.4-3.6 km.Overall,the initial fluid may directly came from magma with the features of high temperature,high salinity and high oxygen fugacity etc.The main mechanism of metallogenic material precipitation is unmixing or boiling of the ore-forming fluid.The zircon U-Pb age of the Metallogenic-related granodiorite porphyry from seventeen analytical spots range from 2 128 to 2 163 Ma,yielding a concordia age of (2 149 ± 4.3) Ma,which shows the age of diagenetic and metallogenic are consistent,both formed in Paleoproterozoic.The εHf(t) values of the metamorphic granodiorite porphyry vary from

  16. Jiangxi Copper Plans to Increase its Refined Copper Output

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>According to news published on March 30th, China’s largest copper producer--Jiangxi Copper alleged in its 2010 Financial Report Statement that it plans to improve its output of refined copper by 4.4% in 2011, to increase from 900,000 tonnes last year to 940,000 tons.

  17. [Copper metabolism and genetic disorders].

    Science.gov (United States)

    Shimizu, Norikazu

    2016-07-01

    Copper is one of essential trace elements. Copper deficiency lead to growth and developmental failure and/or neurological dysfunction. However, excess copper is also problems for human life. There are two disorders of inborn error of copper metabolism, Menkes disease and Wilson disease. Menkes disease is an X linked recessive disorder with copper deficiency and Wilson disease is an autosomal recessive disorder with copper accumulation. These both disorders result from the defective functioning of copper transport P-type ATPase, ATP7A of Menkes disease and ATP7B of Wilson disease. In this paper, the author describes about copper metabolism of human, and clinical feature, diagnosis and treatment of Menkes disease and Wilson disease.

  18. Chinese Copper Manufacturers Expand Overseas

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>In 2012,China’s apparent copper consumption reached 8.84 million tons,accounting for 43%of the global total demand.Spurred by strong demand,China’s copper smelting capacity roars with annual average growth in domestic copper smelting capacity reaching approx-

  19. Fabrication and Characterization of Metallic Copper and Copper Oxide Nanoflowers

    Directory of Open Access Journals (Sweden)

    *H. S. Virk

    2011-12-01

    Full Text Available Copper nanoflowers have been fabricated using two different techniques; electro-deposition of copper in polymer and anodic alumina templates, and cytyltrimethal ammonium bromide (CTAB-assisted hydrothermal method. Scanning Electron Microscope (SEM images record some interesting morphologies of metallic copper nanoflowers. Field Emission Scanning Electron Microscope (FESEM has been used to determine morphology and composition of copper oxide nanoflowers. X-ray diffraction (XRD pattern reveals the monoclinic phase of CuO in the crystallographic structure of copper oxide nanoflowers. There is an element of random artistic design of nature, rather than science, in exotic patterns of nanoflowers fabricated in our laboratory.

  20. Copper and Copper Proteins in Parkinson’s Disease

    Directory of Open Access Journals (Sweden)

    Sergio Montes

    2014-01-01

    Full Text Available Copper is a transition metal that has been linked to pathological and beneficial effects in neurodegenerative diseases. In Parkinson’s disease, free copper is related to increased oxidative stress, alpha-synuclein oligomerization, and Lewy body formation. Decreased copper along with increased iron has been found in substantia nigra and caudate nucleus of Parkinson’s disease patients. Copper influences iron content in the brain through ferroxidase ceruloplasmin activity; therefore decreased protein-bound copper in brain may enhance iron accumulation and the associated oxidative stress. The function of other copper-binding proteins such as Cu/Zn-SOD and metallothioneins is also beneficial to prevent neurodegeneration. Copper may regulate neurotransmission since it is released after neuronal stimulus and the metal is able to modulate the function of NMDA and GABA A receptors. Some of the proteins involved in copper transport are the transporters CTR1, ATP7A, and ATP7B and the chaperone ATOX1. There is limited information about the role of those biomolecules in the pathophysiology of Parkinson’s disease; for instance, it is known that CTR1 is decreased in substantia nigra pars compacta in Parkinson’s disease and that a mutation in ATP7B could be associated with Parkinson’s disease. Regarding copper-related therapies, copper supplementation can represent a plausible alternative, while copper chelation may even aggravate the pathology.

  1. Industrial experiment of copper electrolyte purification by copper arsenite

    Institute of Scientific and Technical Information of China (English)

    ZHENG Ya-jie; XIAO Fa-xin; WANG Yong; LI Chun-hua; XU Wei; JIAN Hong-sheng; MA Yut-ian

    2008-01-01

    Copper electrolyte was purified by copper arsenite that was prepared with As2O3. And electrolysis experiments of purified electrolyte were carried out at 235 and 305 A/m2, respectively. The results show that the yield of copper arsenite is up to 98.64% when the molar ratio of Cu to As is 1.5 in the preparation of copper arsenite. The removal rates of Sb and Bi reach 74.11% and 65.60% respectively after copper arsenite is added in electrolyte. The concentrations of As, Sb and Bi in electrolyte nearly remain constant during electrolysis of 13 d. The appearances of cathode copper obtained at 235 and 305 A/m2 are slippery and even, and the qualification rate is 100% according to the Chinese standard of high-pure cathode copper(GB/T467-97).

  2. Precursors for formation of copper selenide, indium selenide, copper indium diselenide, and/or copper indium gallium diselenide films

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, Calvin J; Miedaner, Alexander; Van Hest, Maikel; Ginley, David S

    2014-11-04

    Liquid-based precursors for formation of Copper Selenide, Indium Selenide, Copper Indium Diselenide, and/or copper Indium Galium Diselenide include copper-organoselenides, particulate copper selenide suspensions, copper selenide ethylene diamine in liquid solvent, nanoparticulate indium selenide suspensions, and indium selenide ethylene diamine coordination compounds in solvent. These liquid-based precursors can be deposited in liquid form onto substrates and treated by rapid thermal processing to form crystalline copper selenide and indium selenide films.

  3. Light-Induced Copper(II) Coordination by a Bicyclic Tetraaza Chelator through a Ligand-to-Metal Charge-Transfer Reaction

    DEFF Research Database (Denmark)

    Holm-Jørgensen, Jacob Rørdam; Jensen, Mikael; Bjerrum, Morten

    2011-01-01

    To enable utilization of the broad potential of copper isotopes in nuclear medicine, rapid and robust chelation of the copper is required. Bowl adamanzanes (bicyclic tetraaza ligands) can form kinetically stable copper complexes, but they are usually formed at low rates unless high pH values...... and high temperatures are applied. We have investigated the effects of the variation in the pH, different anions, and UV irradiation on the chelation rate. UV spectra of mixtures of Cu2+ and [24.31]adz in water show the existence of a longlived two-coordinated copper(II) intermediate (only counting...

  4. 新疆准噶尔北缘玉勒肯哈腊苏铜(钼)矿床流体包裹体和稳定同位素研究%Fluid inclusion and stable isotope study of Yulekenhalasu copper-(molybdenum) deposit in northern margin of Junggar, Xinjiang

    Institute of Scientific and Technical Information of China (English)

    杨富全; 刘国仁; 秦纪华; 张志欣; 刘振江; 张立武; 魏广智; 刘锋; 耿新霞

    2012-01-01

    sequence and ore fabrics, the ore-forming process can be divided into three metallogenic periods: porphyry, shear deformation and supergene periods. The sulfides-K-silicate stage and the molybdenite stage in the porphyry period constituted the main stages for copper mineralization and molybdenum mineralization, respectively. Two types of fluid inclusions, namely H2O-NaCl and H2O-CO2 ( + CH4/N2)-NaCl types, have been recognized in quartz and calcite. Homogenization temperatures of fluid inclusions in the sulfides-K-silicate stage vary from 141*0 to 500X3 , concentrated from 200℃ to 340℃ . Salinity ω(NaCleq)ranges from 2.96% to 14.97% . Ore fluid densities range from 0.60 to 0.98 g/cm3. Fluids of the carbonate stage are characterized by medium-low temperatures (140X3 to 320℃ ) and low salinities (2.74% to 10.61 % ). δ34S values of sulfides associated with mineralization range from - 4.5‰ to - 0.l%, with the peak being - 3.5‰, indicating that sulfur was derived from deep-seated magma. S18OSMOW values of quartz and calcite range from 9.l‰ to 13.2‰, with the correspondingΔ18OH O values between - 2.05‰ and 6.28‰, and δD values of fluid inclusions vary between - 120‰ and - 97‰. The combined isotopic data imply that the ore-forming fluids of the sulfides-K-silicate stage in the Yulekenhalasu Cu-(Mo) deposit were mainly derived from magmatic fluids, with a minor part from the meteoric water, and the fluids of the carbonate stage were mainly derived from the meteoric water, with a minor part from magmatic fluids. Cu-(Mo) mineralization in Yulekenhalasu took place in Middle Devonian ((373.9 ±2.2) Ma], related to the diorite porphyry. The decrease of temperature and pressure, the boiling of local ore-forming fluid, the water-rock exchange, and the compositional variation of ore fluids played important roles in ore-forming processes of the Cu-(Mo) ore bodies.

  5. Discovery of the Cobalt Isotopes

    OpenAIRE

    Szymanski, T.; Thoennessen, M.

    2009-01-01

    Twenty-six cobalt isotopes have so far been observed; the discovery of these isotopes is discussed. For each isotope a brief summary of the first refereed publication, including the production and identification method, is presented.

  6. Discovery of the Arsenic Isotopes

    CERN Document Server

    Shore, A; Heim, M; Schuh, A; Thoennessen, M

    2009-01-01

    Twenty-nine arsenic isotopes have so far been observed; the discovery of these isotopes is discussed. For each isotope a brief summary of the first refereed publication, including the production and identification method, is presented.

  7. The Effect of Copper

    African Journals Online (AJOL)

    higher (p<0.05) in the broodfish fed CSD0 and CSD1 diets than the other diets. Exposure of Clarias gariepinus fish to copper in water, at concentrations above 1.0mg CuSO4/g elicits adverse ... introduction of a toxicant to an aquatic system ..... Toxicity of four commonly used agrochemicals on. Oreochromis niloticus (L) fry.

  8. Lead isotopic exploration intersecting mineralization zones for the depth forecast of concealed deposits——A case from Longbohe Cu deposit,Jinping, Yunnan Province,China

    Institute of Scientific and Technical Information of China (English)

    常向阳; 朱炳泉; 邹日

    2000-01-01

    Pb isotopic geochemical exploration intersecting mineralization zones have been well developed in the light of the eigenvalues V1 and V2 of three-dimensional topological projection of Pb isotopic data. The newly developed theoretical model forecasting concealed deposits has been verified in the evaluation of Longbohe copper deposit in Jinping, Yunnan Province, which is consistent with the observed law of depth variation for Pb isotopes. The forecasting results show that the depth of buried major orebody should occur at about -50 to -400 m and deeper within the eastern and western mineralization belts of Longbohe copper deposit.

  9. Intracellular Cadmium Isotope Fractionation

    Science.gov (United States)

    Horner, T. J.; Lee, R. B.; Henderson, G. M.; Rickaby, R. E.

    2011-12-01

    Recent stable isotope studies into the biological utilization of transition metals (e.g. Cu, Fe, Zn, Cd) suggest several stepwise cellular processes can fractionate isotopes in both culture and nature. However, the determination of fractionation factors is often unsatisfactory, as significant variability can exist - even between different organisms with the same cellular functions. Thus, it has not been possible to adequately understand the source and mechanisms of metal isotopic fractionation. In order to address this problem, we investigated the biological fractionation of Cd isotopes within genetically-modified bacteria (E. coli). There is currently only one known biological use or requirement of Cd, a Cd/Zn carbonic anhydrase (CdCA, from the marine diatom T. weissfloggii), which we introduce into the E. coli genome. We have also developed a cleaning procedure that allows for the treating of bacteria so as to study the isotopic composition of different cellular components. We find that whole cells always exhibit a preference for uptake of the lighter isotopes of Cd. Notably, whole cells appear to have a similar Cd isotopic composition regardless of the expression of CdCA within the E. coli. However, isotopic fractionation can occur within the genetically modified E. coli during Cd use, such that Cd bound in CdCA can display a distinct isotopic composition compared to the cell as a whole. Thus, the externally observed fractionation is independent of the internal uses of Cd, with the largest Cd isotope fractionation occurring during cross-membrane transport. A general implication of these experiments is that trace metal isotopic fractionation most likely reflects metal transport into biological cells (either actively or passively), rather than relating to expression of specific physiological function and genetic expression of different metalloenzymes.

  10. Presenilin promotes dietary copper uptake.

    Directory of Open Access Journals (Sweden)

    Adam Southon

    Full Text Available Dietary copper is essential for multicellular organisms. Copper is redox active and required as a cofactor for enzymes such as the antioxidant Superoxide Dismutase 1 (SOD1. Copper dyshomeostasis has been implicated in Alzheimer's disease. Mutations in the presenilin genes encoding PS1 and PS2 are major causes of early-onset familial Alzheimer's disease. PS1 and PS2 are required for efficient copper uptake in mammalian systems. Here we demonstrate a conserved role for presenilin in dietary copper uptake in the fly Drosophila melanogaster. Ubiquitous RNA interference-mediated knockdown of the single Drosophila presenilin (PSN gene is lethal. However, PSN knockdown in the midgut produces viable flies. These flies have reduced copper levels and are more tolerant to excess dietary copper. Expression of a copper-responsive EYFP construct was also lower in the midgut of these larvae, indicative of reduced dietary copper uptake. SOD activity was reduced by midgut PSN knockdown, and these flies were sensitive to the superoxide-inducing chemical paraquat. These data support presenilin being needed for dietary copper uptake in the gut and so impacting on SOD activity and tolerance to oxidative stress. These results are consistent with previous studies of mammalian presenilins, supporting a conserved role for these proteins in mediating copper uptake.

  11. Carbon, oxygen, sulfur and lead isotope constraints on the ore source and metallogenesis of copper deposits in western Awulale Mountain metallogenic belt, Xinjiang%新疆阿吾拉勒成矿带西段铜矿床碳、氧、硫、铅同位素研究——成矿物质来源及成矿环境探讨

    Institute of Scientific and Technical Information of China (English)

    赵军; 张作衡; 刘晓阳; 刘敏; 张贺; 朱维娜

    2012-01-01

    western Awulale Mountain metallogenic belt include subvolanic rock-related Cu deposits (SVR) situated in the middle and southern area and intermediate-low temperature hydrother-mal vein-type Cu deposits (ILTHV) located in the northern area. This paper reports a detailed C, O, S and Pb isotopic investigation of three SVR deposits (No. 109, Qunjisayi and Qunji) and two ILTHV deposits (Nulasai and Qiongbulake) lying from south to north in the ore field. The sulfur isotopic compositions of the sulfides from the five deposits show distinct differences and systematic variations from south to north. The SVR deposits show small variation of δ34S values from + 3.4%o to +4.4%o (No. 109 deposit) and from - 1.6%o to 0.2%o (Qunjisayi and Qunji deposits). In contrast, the ILTHV deposits have large variation of S^S values from - 18%o to + 8.9%o. The carbon and oxygen isotope variations of the two types have similar sulfur isotope variation features. The SVR deposits show small variation of δ13C values from - 1.44%o to + 0.8%o and relatively large variation of δ18O values from + 11.87‰ to + 16.99‰. The ILTHV deposits have large variation of δ13C values from - 10.1% to -3.2% and relatively large variation of δ18O values from 9.63% to 16.27%. The Pb-isotopic composition of sulfides from ILTHV deposits indicate that they are normal-Pb mainly derived from the mantle. The Pb-isotope of sulfides from felisic SVR deposits is rich in radiogenetic Pb provided by the Precam-brian basement rock. The Pb-isotope of sulfides from basic SVR deposits is the mixed mantle-Pb and crust-Pb. In conclusion, the systematic variations of mineral source and ore-forming process from SVR deposits to ILTHV deposits reveal that the metallogenic environments in southern and northern copper belt are different and this dif-ference was probably related to the Permian rifting evolution. In the process of Permian rifting evolution, the different extents of the stretching structure in southern and northern copper

  12. Re-Os isotopic dating of chalcopyrite from the Abalieke copper-lead deposits in West Kunlun, China%西昆仑阿巴列克铜铅矿床黄铜矿Re-Os定年及地质意义

    Institute of Scientific and Technical Information of China (English)

    张正伟; 漆亮; 沈能平; 游富华; 张中山; 周灵洁

    2011-01-01

    It is a very important and effective method of analyzing the ore-forming processes by taking advantage of geochemistry analytical approaches as well as traditional ways, such as testing the Re-Os, discriminating the paragenetic association of the minerals and the tectonic settings. Seven chalcopyrite and one pyrite samples from the main orebody of Abalieke Cu-Pb deposit are used for Re-Os dating. The chalcopyrite is associated with galenite and dolomite which contain 626 x 10 " ~ 14533 x 10 ~ of Re and 0. 026 x 10 ~0. 36 x 10 "9 of Os respectively, and yield a Hercynina isochron age of 331. 3 ±5. 2Ma. High Re/Os ratio, low Os concentration and highly radiogenic Os isotopic ratios of these samples suggest that they are of crustal origin. The tectonic evolving shows that the southwestern margin of the Tarim block was a passive continental margin in the Late Paleozoic era. Because of the Paleo-Tethys ocean movement during Carboniferous, the depression basin are formed in margin of Tarim craton, comprised lead-zinc deposits in clastic rock-carbonate host stratum that cover up the Devonian. This Re-Os isotopic dating age of chalcopyrite is nearly closed with ore-hosted stratum. Our Re-Os result provides new evidences, showing that Abalieke Cu-Pb deposit experienced the syngenetic ore-forming process in Hercynina Also this study gives important geochemical evidence on such issues; the lead-zinc deposits are mainly sedimentary formation-controlled type; the ore-forming elements mainly came from stratum; mineralization occurred in the joint position between Upper Devonian and Lower Carboniferous, while the rock in which mainly consist of sandstone and carbonatite formation. It can be seen that the metallogenic system of the copper-lead-zinc strata-bound deposits in carbonate rock has a certain complexity and provides wider space for further researches.%除了传统的测试Rb-Sr、Sm-Nd、U-Th-Pb、K-Ar或Ar-Ar等方法来讨论碳酸盐岩层控型铅锌矿的成矿年

  13. Comparative characteristics of copper, copper chloride, and copper bromide vapor lasers

    Energy Technology Data Exchange (ETDEWEB)

    Kazarian, M.A.; Petrash, G.G.; Trofimov, A.N.

    1980-03-01

    The paper reports the results of a comparative study of copper and copper halide vapor lasers emitting in a repetitively-pulsed regime. Copper chloride and copper bromide vapor lasers are found to have identical lasing characteristics under any excitation conditions. These characteristics are different from those of a copper vapor laser. An average lasing power of 13 W has been obtained for all lasers studied for an efficiency of 1%. It is shown that the choice of a laser will largely depend on the laser design suitability for a specific application.

  14. The role of coordination chemistry in the development of copper and rhenium radiopharmaceuticals.

    Science.gov (United States)

    Donnelly, Paul S

    2011-02-01

    There are several isotopes of copper and rhenium that are of interest in the development of new molecular imaging or radiotherapeutic agents. This perspective article highlights the role of coordination chemistry in the design of copper and rhenium radiopharmaceuticals engineered to selectively target tissue of interest such as cancer cells or pathological features associated with Alzheimer's disease. The coordination chemistry of copper bis(thiosemicarbazone) derivatives and copper macrocyclic complexes is discussed in terms of their potential application as targeted positron emission tomography tracers for non-invasive diagnostic imaging. A range of rhenium complexes with different ligands with rhenium in different oxidation states are introduced and their potential to be translated to new radiotherapeutic agents discussed.

  15. Chromium isotope variations

    DEFF Research Database (Denmark)

    D'Arcy, Joan Mary

    is incorporated into carbonates. Hence, ancient carbonates can potentially record the Cr isotopic composition (δ53Cr ‰) of seawater in the geological past. Reliable application and interpretation of this proxy requires a detailed knowledge about processes that fractionate Cr on the Earth’s surface...... deposited during the Early Ordovician — a time of known redox instability in ancient oceans – exhibit a significant positive Cr isotope excursion of +0.5‰. This excursion is interpreted as the reductive drawn down of dissolved Cr in seawater in response to the development of a proximal anoxic sink......, and the quantification the Cr isotope composition of major Cr fluxes into and out of ocean. This thesis adds to the current knowledge of the Cr isotope system and is divided into two studies. The focus of the first study was to determine what processes control the Cr isotopic compositionof river water and to quantify...

  16. Isotopes in Greenland Precipitation

    DEFF Research Database (Denmark)

    Faber, Anne-Katrine

    Greenland ice cores offer a unique opportunity to investigate the climate system behaviour. The objective of this PhD project is to investigate isotope modelling of present- day conditions and conduct model-data comparison using Greenland ice cores. Thus this thesis investigates how the integration...... of model and data can be used to improve the understanding of climate changes. This is done through analysis of isotope modelling, observations and ice core measurements. This dissertation comprises three projects: (1) Modelling the isotopic response to changes in Arctic sea surface conditions, (2......) Constructing a new Greenland database of observations and present-day ice core measurements, and (3) Performance test of isotope-enabled CAM5 for Greenland. The recent decades of rapid Arctic sea ice decline are used as a basis for an observational-based model experiment using the isotope-enabled CAM model 3...

  17. Stable isotopes of transition and post-transition metals as tracers in environmental studies

    Science.gov (United States)

    Bullen, Tomas D.; Baskaran, Mark

    2011-01-01

    The transition and post-transition metals, which include the elements in Groups 3–12 of the Periodic Table, have a broad range of geological and biological roles as well as industrial applications and thus are widespread in the environment. Interdisciplinary research over the past decade has resulted in a broad understanding of the isotope systematics of this important group of elements and revealed largely unexpected variability in isotope composition for natural materials. Significant kinetic and equilibrium isotope fractionation has been observed for redox sensitive metals such as iron, chromium, copper, molybdenum and mercury, and for metals that are not redox sensitive in nature such as cadmium and zinc. In the environmental sciences, the isotopes are increasingly being used to understand important issues such as tracing of metal contaminant sources and fates, unraveling metal redox cycles, deciphering metal nutrient pathways and cycles, and developing isotope biosignatures that can indicate the role of biological activity in ancient and modern planetary systems.

  18. Production of ultrahigh purity copper using waste copper nitrate solution.

    Science.gov (United States)

    Choi, J Y; Kim, D S

    2003-04-25

    The production of ultrahigh purity copper (99.9999%) by electrolysis in the presence of a cementation barrier has been attempted employing a waste nitric copper etching solution as the electrolyte. The amount of copper deposited on the cathode increased almost linearly with electrolysis time and the purity of copper was observed to increase as the electrolyte concentration was increased. At some point, however, as the electrolyte concentration increased, the purity of copper decreased slightly. As the total surface area of cementation barrier increased, the purity of product increased. The electrolyte temperature should be maintained below 35 degrees C in the range of investigated electrolysis conditions to obtain the ultrahigh purity copper. Considering that several industrial waste solutions contain valuable metallic components the result of present study may support a claim that electrowinning is a very desirable process for their treatment and recovery.

  19. Tongling:Copper Industry Giant Takes Shape

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>Centering on the strategic goal of building "World Copper Capital", Tongling constantly extends its product lines and improves the copper industry chain. Now, the copper industry with a production value of RMB 100 billion has taken shape.As the largest copper wire rod manufacturer in Asia, Tongling Quanwei Copper Technologies Co., Ltd., upon its moving into the local market,

  20. Direct Production of Copper

    Science.gov (United States)

    Victorovich, G. S.; Bell, M. C.; Diaz, C. M.; Bell, J. A. E.

    1987-09-01

    The use of commercially pure oxygen in flash smelting a typical chalcopyrite concentrate or a low grade comminuted matte directly to copper produces a large excess of heat. The heat balance is controlled by adjusting the calorific value of the solid feed. A portion of the sulfide material is roasted to produce a calcine which is blended with unroasted material, and the blend is then autogeneously smelted with oxygen and flux directly to copper. Either iron silicate or iron calcareous slags are produced, both being subject to a slag cleaning treatment. Practically all of the sulfur is contained in a continuous stream of SO2 gas, most of which is strong enough for liquefaction. A particularly attractive feature of these technologies is that no radically new metallurgical equipment needs to be developed. The oxygen smelting can be carried out not only in the Inco type flash furnace but in other suitable smelters such as cyclone furnaces. Another major advantage stems from abolishion of the ever-troublesome converter aisle, which is replaced with continuous roasting of a fraction of the copper sulfide feed.

  1. 东秦岭秋树湾铜钼矿流体包裹体和稳定同位素特征及其地质意义%Fluid inclusions and stable isotopes of Qiushuwan copper-molybdenum deposit in East Qinling orogenic belt and their geological implications

    Institute of Scientific and Technical Information of China (English)

    秦臻; 戴雪灵; 邓湘伟

    2012-01-01

    The Qiushuwan copper-molybdenum deposit in the East Qinling molybdenum belt is atypical skarn-por-phyry breccia pipe controlled by the porphyry. Ore bodies occur in the biotite granite porphyry, skarn and breccia pipes. According to mineral paragenesis, ore fabrics, wall-rock alteration and intersecting relationship of the veins, the formation of the ore deposit can be divided into three periods, i.e., high-temperature alteration-skarn period ( Ⅰ ), sulfide precipitation period ( Ⅱ ) and low-temperature mineral-free period ( Ⅲ ), composed of six ore-forming stages: dry skarn -K-feldspar-quartz stage ( Ⅰ1), explosion breccia stage ( Ⅰ 2). wet skarn stage ( Ⅰ3), magnetite stage ( Ⅰ4), porphyry copper (molybdenum) ore stage ( Ⅱ b) and quartz sulfide mineralization ( Ⅱ s), and calcite, barite, quartz stage (Ⅲ ). Mineral-forming fluids in quartz, garnet and calcite can be divided into five types, i.e., S-type multi-phase inclusions containing daughter minerals, L-type pure liquid inclusions, C-type three-phase CQ2-bearing inclusions, W-type gas-liquid two-phase inclusions, and G type pure gas inclusions. Ore-forming fluid temperature, salinity and redox environment are characterized by regular evolution: homogenization temperature values of I period, Ⅱ period and Ⅲ period are 222 ~ 406℃, 152~315℃, and 119~189X3 respectively, whereas salinities ω(NaCleq) of I period, Ⅱ period and Ⅲ period are 4.2% ~ 36.5%, 3.3%~34.8% and 4.2% ~ 11.9%, respectively; Raman spectroscopy and analysis of group inclusions show that the fluid compositions are mainly H2O, CO2, CH4, H2S in Ⅰ period, implying a reduction environment, H2O, CO2, N2, O2, (SO4,2-) Cl-, F- in Ⅱ period, suggesting an oxidation environment and the derivation of fluid from the magma. Inclusions petrography and thermometry shows that the fluid was originally high temperature, high salinity, CO2-bearing H2O-NaCl-CO2 system magmatic fluid, and experienced boiling and phase

  2. Mechanochemical reactions on copper-based compounds

    NARCIS (Netherlands)

    Castricum, H.L.; Bakker, H.; Poels, E.K.

    1999-01-01

    Mechanochemical reactions of copper and copper oxides with oxygen and carbon dioxide are discussed, as well as decomposition and reduction of copper compounds by mechanical milling under high-vacuum conditions.

  3. Oxidation Mechanism of Copper Selenide

    Science.gov (United States)

    Taskinen, Pekka; Patana, Sonja; Kobylin, Petri; Latostenmaa, Petri

    2014-09-01

    The oxidation mechanism of copper selenide was investigated at deselenization temperatures of copper refining anode slimes. The isothermal roasting of synthetic, massive copper selenide in flowing oxygen and oxygen - 20% sulfur dioxide mixtures at 450-550 °C indicate that in both atmospheres the mass of Cu2Se increases as a function of time, due to formation of copper selenite as an intermediate product. Copper selenide oxidises to copper oxides without formation of thick copper selenite scales, and a significant fraction of selenium is vaporized as SeO2(g). The oxidation product scales on Cu2Se are porous which allows transport of atmospheric oxygen to the reaction zone and selenium dioxide vapor to the surrounding gas. Predominance area diagrams of the copper-selenium system, constructed for selenium roasting conditions, indicate that the stable phase of copper in a selenium roaster gas with SO2 is the sulfate CuSO4. The cuprous oxide formed in decomposition of Cu2Se is further sulfated to CuSO4.

  4. Multistage Carbonatization and Mineral Geochemistry of a Skarn—type Copper Deposit at Tongshan ,Guichi

    Institute of Scientific and Technical Information of China (English)

    邱瑞龙

    1991-01-01

    The Tongshan copper deposit at Guichi can be considered as a skarn-type copper deposit.Mul-ti-stage carbonatization was well developed in the skarn zone and copper-bearing orebodies,Mineralogy,mineral chemistry and stable isotope data allow it to be divided into five stages:(1)carbonatization of single calcite crystals in the skarn stage;(2)calcite carbonatization in the oxide stage;(3)carbonatization in the early sulfide stage;(4)carbonatization in the late sulfide stage;and (5)carbonatization in the post-sulfide stage.Carbonatization in the early sulide stage is ,among other things,closely related to copper mineralization and is one of the alteration indicators of copper mineralization of this type.C.O,Rb and Sr isotopic studies indicate that the cakites of skarn and oxide stages were formed from hydrothermal solutions predominated by magmatic water,and those of sulfide stage were formed from hydrothermal solutions mainly involving heated meteoric warer.The former was formed in the environment where ?o2(?o2>10-33and 10-33>?o2>10-36)(pH=7-8)is high as compared with the latter(10-35>?o2>10-38;pH=5.7).

  5. Copper and copper-nickel-alloys - An overview

    Energy Technology Data Exchange (ETDEWEB)

    Klassert, Anton; Tikana, Ladji [Deutsches Kupferinstitut e.V. Am Bonneshof 5, 40474 Duesseldorf (Germany)

    2004-07-01

    With the increasing level of industrialization the demand for and the number of copper alloys rose in an uninterrupted way. Today, the copper alloys take an important position amongst metallic materials due to the large variety of their technological properties and applications. Nowadays there exist over 3.000 standardized alloys. Copper takes the third place of all metals with a worldwide consumption of over 15 millions tons per year, following only to steel and aluminum. In a modern industrial society we meet copper in all ranges of the life (electro-technology, building and construction industry, mechanical engineering, automotive, chemistry, offshore, marine engineering, medical applications and others.). Copper is the first metal customized by humanity. Its name is attributed to the island Cyprus, which supplied in the antiquity copper to Greece, Rome and the other Mediterranean countries. The Romans called it 'ore from Cyprus' (aes cyprium), later cuprum. Copper deposited occasionally also dapper and could be processed in the recent stone age simply by hammering. Already in early historical time copper alloys with 20 to 50 percent tin was used for the production of mirrors because of their high reflecting power. Although the elementary nickel is an element discovered only recently from a historical perspective, its application in alloys - without any knowledge of the alloy composition - occurred at least throughout the last 2.000 years. The oldest copper-nickel coin originates from the time around 235 B.C.. Only around 1800 AD nickel was isolated as a metallic element. In particular in the sea and offshore technology copper nickel alloys found a broad field of applications in piping systems and for valves and armatures. The excellent combination of characteristics like corrosion resistance, erosion stability and bio-fouling resistance with excellent mechanical strength are at the basis of this success. An experience of many decades supports the use

  6. Isotopes in Greenland Precipitation

    DEFF Research Database (Denmark)

    Faber, Anne-Katrine

    the Arctic Ocean. A comprehensive database is created based on ice core and weather station data from Greenland within the period 1890-2014. Present day annual and seasonal mean values are computed for 326 locations in Greenland. Parameterization of the spatial distribution of temperature and δ18O are used...... of model and data can be used to improve the understanding of climate changes. This is done through analysis of isotope modelling, observations and ice core measurements. This dissertation comprises three projects: (1) Modelling the isotopic response to changes in Arctic sea surface conditions, (2......) Constructing a new Greenland database of observations and present-day ice core measurements, and (3) Performance test of isotope-enabled CAM5 for Greenland. The recent decades of rapid Arctic sea ice decline are used as a basis for an observational-based model experiment using the isotope-enabled CAM model 3...

  7. Perchlorate isotope forensics

    Science.gov (United States)

    Böhlke, J.K.; Sturchio, N.C.; Gu, B.; Horita, J.; Brown, G.M.; Jackson, W.A.; Batista, J.; Hatzinger, P.B.

    2005-01-01

    Perchlorate has been detected recently in a variety of soils, waters, plants, and food products at levels that may be detrimental to human health. These discoveries have generated considerable interest in perchlorate source identification. In this study, comprehensive stable isotope analyses ( 37Cl/35Cl and 18O/17O/ 16O) of perchlorate from known synthetic and natural sources reveal systematic differences in isotopic characteristics that are related to the formation mechanisms. In addition, isotopic analyses of perchlorate extracted from groundwater and surface water demonstrate the feasibility of identifying perchlorate sources in contaminated environments on the basis of this technique. Both natural and synthetic sources of perchlorate have been identified in water samples from some perchlorate occurrences in the United States by the isotopic method. ?? 2005 American Chemical Society.

  8. Isotope Production Facility (IPF)

    Data.gov (United States)

    Federal Laboratory Consortium — The Los Alamos National Laboratory has produced radioactive isotopes for medicine and research since the mid 1970s, when targets were first irradiated using the 800...

  9. Calcium stable isotope geochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Gausonne, Nikolaus [Muenster Univ. (Germany). Inst. fuer Mineralogie; Schmitt, Anne-Desiree [Strasbourg Univ. (France). LHyGeS/EOST; Heuser, Alexander [Bonn Univ. (Germany). Steinmann-Inst. fuer Geologie, Mineralogie und Palaeontologie; Wombacher, Frank [Koeln Univ. (Germany). Inst. fuer Geologie und Mineralogie; Dietzel, Martin [Technische Univ. Graz (Austria). Inst. fuer Angewandte Geowissenschaften; Tipper, Edward [Cambridge Univ. (United Kingdom). Dept. of Earth Sciences; Schiller, Martin [Copenhagen Univ. (Denmark). Natural History Museum of Denmark

    2016-08-01

    This book provides an overview of the fundamentals and reference values for Ca stable isotope research, as well as current analytical methodologies including detailed instructions for sample preparation and isotope analysis. As such, it introduces readers to the different fields of application, including low-temperature mineral precipitation and biomineralisation, Earth surface processes and global cycling, high-temperature processes and cosmochemistry, and lastly human studies and biomedical applications. The current state of the art in these major areas is discussed, and open questions and possible future directions are identified. In terms of its depth and coverage, the current work extends and complements the previous reviews of Ca stable isotope geochemistry, addressing the needs of graduate students and advanced researchers who want to familiarize themselves with Ca stable isotope research.

  10. Isotopically controlled semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Haller, E.E.

    2004-11-15

    A review of recent research involving isotopically controlled semiconductors is presented. Studies with isotopically enriched semiconductor structures experienced a dramatic expansion at the end of the Cold War when significant quantities of enriched isotopes of elements forming semiconductors became available for worldwide collaborations. Isotopes of an element differ in nuclear mass, may have different nuclear spins and undergo different nuclear reactions. Among the latter, the capture of thermal neutrons which can lead to neutron transmutation doping, can be considered the most important one for semiconductors. Experimental and theoretical research exploiting the differences in all the properties has been conducted and will be illustrated with selected examples. Manuel Cardona, the longtime editor-in-chief of Solid State Communications has been and continues to be one of the major contributors to this field of solid state physics and it is a great pleasure to dedicate this review to him.

  11. Isotopes through the looking glass

    Science.gov (United States)

    Mårtensson Pendrill, Ann Marie

    2000-08-01

    Nuclear distributions affect many aspects of atomic spectra. As an example, recent experimental results for the hyperfine anomaly in Fr isotopes are considered. These depend on nuclear charge and magnetization distributions. The variations in charge radii for these isotopes were studied earlier by measuring optical isotope shifts. The hyperfine anomalies for the odd-odd isotopes involve the neutron distributions, of interest for studies of parity nonconserving effects along a chain of isotopes.

  12. Removal of copper from ferrous scrap

    Science.gov (United States)

    Blander, Milton; Sinha, Shome N.

    1990-01-01

    A process for removing copper from ferrous or other metal scrap in which the scrap is contacted with a polyvalent metal sulfide slag in the presence of an excess of copper-sulfide forming additive to convert the copper to copper sulfide which is extracted into the slag to provide a ratio of copper in the slag to copper in the metal scrap of at least about 10.

  13. Variations of serum copper values in pregnancy

    OpenAIRE

    Vukelić Jelka; Kapamadžija Aleksandra; Petrović Đorđe; Grujić Zorica; Novakov-Mikić Aleksandra; Kopitović Vesna; Bjelica Artur

    2012-01-01

    Introduction. Copper is essential micronutrient and has an important role in the human body. The serum copper increases during pregnancy and is doubled at full term. Lower levels of serum copper in pregnancy are connected with some pathological conditions. Objective. The aim of this study was to estimate the levels of serum copper in normal and pathological pregnancies, comparing them with values of serum copper in non-pregnant women, to determine if serum copper is lower in some pathol...

  14. Methods of isotopic geochronology

    Science.gov (United States)

    Gorokhov, I. M.; Levchenkov, O. A.

    Papers are presented on such topics as the age of the chemical elements; the age of meteorites, the moon, and the earth; isotopic ages of the most ancient terrestrial formations; and the Archean evolution of Enderby Land in the Antarctic as evidenced by isotopic dating. Consideration is also given to a uranium-lead geochronology technique for investigating Precambrian ore deposits, a Pb-Pb technique of zircon dating, and the potentials and limitations of Sm-Nd geochronology.

  15. Nickel, copper and cobalt coalescence in copper cliff converter slag

    Directory of Open Access Journals (Sweden)

    Wolf A.

    2016-01-01

    Full Text Available The aim of this investigation is to assess the effect of various additives on coalescence of nickel, copper and cobalt from slags generated during nickel extraction. The analyzed fluxes were silica and lime while examined reductants were pig iron, ferrosilicon and copper-silicon compound. Slag was settled at the different holding temperatures for various times in conditions that simulated the industrial environment. The newly formed matte and slag were characterized by their chemical composition and morphology. Silica flux generated higher partition coefficients for nickel and copper than the addition of lime. Additives used as reducing agents had higher valuable metal recovery rates and corresponding partition coefficients than fluxes. Microstructural studies showed that slag formed after adding reductants consisted of primarily fayalite, with some minute traces of magnetite as the secondary phase. Addition of 5 wt% of pig iron, ferrosilicon and copper-silicon alloys favored the formation of a metallized matte which increased Cu, Ni and Co recoveries. Addition of copper-silicon alloys with low silicon content was efficient in copper recovery but coalescence of the other metals was low. Slag treated with the ferrosilicon facilitated the highest cobalt recovery while copper-silicon alloys with silicon content above 10 wt% resulted in high coalescence of nickel and copper, 87 % and 72 % respectively.

  16. Study of Copper Substitute in High Copper Price Market Environment

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>The high price of copper drives up industry cost,also it is difficult for terminal products to raise price to transfer the cost pressure brought by increase in copper price,as a result downstream consumption markets instead try to seek

  17. Oxygen Isotopes in Meteorites

    Science.gov (United States)

    Clayton, R. N.

    2003-12-01

    Oxygen isotope abundance variations in meteorites are very useful in elucidating chemical and physical processes that occurred during the formation of the solar system (Clayton, 1993). On Earth, the mean abundances of the three stable isotopes are 16O: 99.76%, 17O: 0.039%, and 18O: 0.202%. It is conventional to express variations in abundances of the isotopes in terms of isotopic ratios, relative to an arbitrary standard, called SMOW (for standard mean ocean water), as follows:The isotopic composition of any sample can then be represented by one point on a "three-isotope plot," a graph of δ17O versus δ18O. It will be seen that such plots are invaluable in interpreting meteoritic data. Figure 1 shows schematically the effect of various processes on an initial composition at the center of the diagram. Almost all terrestrial materials lie along a "fractionation" trend; most meteoritic materials lie near a line of "16O addition" (or subtraction). (4K)Figure 1. Schematic representation of various isotopic processes shown on an oxygen three-isotope plot. Almost all terrestrial materials plot along a line of "fractionation"; most primitive meteoritic materials plot near a line of "16O addition." The three isotopes of oxygen are produced by nucleosynthesis in stars, but by different nuclear processes in different stellar environments. The principal isotope, 16O, is a primary isotope (capable of being produced from hydrogen and helium alone), formed in massive stars (>10 solar masses), and ejected by supernova explosions. The two rare isotopes are secondary nuclei (produced in stars from nuclei formed in an earlier generation of stars), with 17O coming primarily from low- and intermediate-mass stars (shielding in the UV photodissociation of CO (van Dishoeck and Black, 1988). This process results from the large differences in abundance between C16O, on the one hand, and C17O and C18O on the other. Photolysis of CO occurs by absorption of stellar UV radiation in the

  18. Fixation Property of Copper Triazole Wood Preservatives

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    According to AWPA E11-2006 standard,copper fixation rates of several copper-based formulations,such as ammoniacal copper,amine copper,and ammoniacal-ethanolamine copper,as well as alkaline copper quaternary(ACQ),were tested and compared in this paper.And the fixation rates of tebuconazole(TEB) and propiconazole(PPZ) in several formulations,such as copper azole,emulsified type and solvent type,were also compared.The determination of copper content in the leachate was analyzed by atomic absorption spectrom...

  19. INTERACTION OF COPPER BASED PRESERVATIVES WITH WOOD

    Directory of Open Access Journals (Sweden)

    Ali Temiz

    2004-11-01

    Full Text Available Copper is highly toxic to fungi and the element is widely used in many preservative formulations over 50 years. The interactions of wood and copper-based preservatives impact both the performance and the environment aspects of treated wood. Copper might be present in treated wood as coppercellulose complex, copper-lignin complex, and crystalline or amorphous inorganic/organic copper compounds. In this review; it was aimed to investigate the interactions of wood and copper-based preservatives, Copper Adsorpsion factors and copper forms in treated wood

  20. Origin of the mysterious Yin-Shang bronzes in China indicated by lead isotopes

    Science.gov (United States)

    Sun, Wei-dong; Zhang, Li-peng; Guo, Jia; Li, Cong-ying; Jiang, Yu-hang; Zartman, Robert E.; Zhang, Zhao-feng

    2016-01-01

    Fine Yin-Shang bronzes containing lead with puzzlingly highly radiogenic isotopic compositions appeared suddenly in the alluvial plain of the Yellow River around 1400 BC. The Tongkuangyu copper deposit in central China is known to have lead isotopic compositions even more radiogenic and scattered than those of the Yin-Shang bronzes. Most of the Yin-Shang bronzes are tin-copper alloys with high lead contents. The low lead and tin concentrations, together with the less radiogenic lead isotopes of bronzes in an ancient smelting site nearby, however, exclude Tongkuangyu as the sole supplier of the Yin-Shang bronzes. Interestingly, tin ingots/prills and bronzes found in Africa also have highly radiogenic lead isotopes, but it remains mysterious as to how such African bronzes may have been transported to China. Nevertheless, these African bronzes are the only bronzes outside China so far reported that have lead isotopes similar to those of the Yin-Shang bronzes. All these radiogenic lead isotopes plot along ~2.0–2.5 Ga isochron lines, implying that deposits around Archean cratons are the most likely candidates for the sources. African cratons along the Nile and even micro-cratons in the Sahara desert may have similar lead signatures. These places were probably accessible by ancient civilizations, and thus are the most favorable suppliers of the bronzes. PMID:26988425

  1. Electroleaching of Copper Waste with Recovery of Copper by Electrodialysis

    Directory of Open Access Journals (Sweden)

    Nuñez P.

    2013-04-01

    Full Text Available A new process to leach and recover copper from solid waste using electric fields was designed. The leaching with electro migration is presented as an alternative to traditional leaching. Preliminary data indicate that the copper ion migration is facilitated by using the electrical potential difference; therefore applying a potential difference in the processes of leaching facilitates the removal of copper. This is especially useful when mineral concentrations are very low. Different phenomena associated with transport of copper in solution are studied to generate a model able predict the state of the copper ion concentration in time. A kinetic model for the process was developed and fitted very well the experimental data.

  2. Synthesis of copper/copper oxide nanoparticles by solution plasma

    Science.gov (United States)

    Saito, Genki; Hosokai, Sou; Tsubota, Masakatsu; Akiyama, Tomohiro

    2011-07-01

    This paper describes the synthesis of copper/copper oxide nanoparticles via a solution plasma, in which the effect of the electrolyte and electrolysis time on the morphology of the products was mainly examined. In the experiments, a copper wire as a cathode was immersed in an electrolysis solution of a K2CO3 with the concentration from 0.001 to 0.50 M or a citrate buffer (pH = 4.8), and was melted by the local-concentration of current. The results demonstrated that by using the K2CO3 solution, we obtained CuO nanoflowers with many sharp nanorods, the size of which decreased with decreasing the concentration of the solution. Spherical particles of copper with/without pores formed when the citrate buffer was used. The pores in the copper nanoparticles appeared when the applied voltage changed from 105 V to 130 V, due to the dissolution of Cu2O.

  3. Elemental and iron isotopic composition of aerosols collected in a parking structure.

    Science.gov (United States)

    Majestic, Brian J; Anbar, Ariel D; Herckes, Pierre

    2009-09-01

    The trace metal contents and iron isotope composition of size-resolved aerosols were determined in a parking structure in Tempe, AZ, USA. Particulate matter (PM)2.5 microm were collected. Several air toxics (e.g., arsenic, cadmium, and antimony) were enriched above the crustal average, implicating automobiles as an important source. Extremely high levels of fine copper (up to 1000 ng m(-3)) were also observed in the parking garage, likely from brake wear. The iron isotope composition of the aerosols were found to be +0.15+/-0.03 per thousand and +0.18+/-0.03 per thousand for the PM2.5 microm fractions, respectively. The similarity of isotope composition indicates a common source for each size fraction. To better understand the source of iron in the parking garage, the elemental composition in four brake pads (two semi-metallic and two ceramic), two tire tread samples, and two waste oil samples were determined. Striking differences in the metallic and ceramic brake pads were observed. The ceramic brake pads contained 10-20% copper by mass, while the metallic brake pads contained about 70% iron, with very little copper. Both waste oil samples contained significant amounts of calcium, phosphorous, and zinc, consistent with the composition of some engine oil additives. Differences in iron isotope composition were observed between the source materials; most notably between the tire tread (average=+0.02 per thousand) and the ceramic brake linings (average=+0.65 per thousand). Differences in isotopic composition were also observed between the metallic (average=+0.18 per thousand) and ceramic brake pads, implying that iron isotope composition may be used to resolve these sources. The iron isotope composition of the metallic brake pads was found to be identical to the aerosols, implying that brake dust is the dominant source of iron in a parking garage.

  4. Studies of copper transport in mammalian cells using copper radioisotopes

    Energy Technology Data Exchange (ETDEWEB)

    Camakaris, J.; Voskoboinik, I.; Brooks, H.; Greenough, M. [University of Melbourne, Parkville, VIC (Australia). Department of Genetics; Smith, S. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia). Radiopharmaceuticals Division; Mercer, J. [Deakin University, Clayton, VIC (Australia). Centre of Cellular and Molecular Biology

    1998-12-31

    The trace element copper poses a major problem for all organisms. It is essential as a number of vital enzymes require it. Copper deficiency can lead to neurological disorders, osteoporosis and weakening of arteries. However Cu is also highly toxic and homeostatic mechanisms have evolved to maintain Cu at levels which satisfy requirements but do not cause toxicity. Toxicity is mediated by the oxidative capacity of Cu and its ability to generate toxic free radicals. There are several acquired and inherited diseases due to either Cu toxicity or Cu deficiency. The study of these diseases facilitates identification of genes and proteins involved in copper homeostasis, and this in turn will provide rational therapeutic approaches. Using the copper radioisotopes {sup 64}Cu (t1/2 = 12.8 hr) and {sup 67}Cu (t1/2 = 61 hr) we have developed a number of systems for studying copper transport in mammalian cells. These include investigation of copper uptake, copper efflux and ligand blot assays for Cu-binding proteins. Our studies have focused on Menkes disease which is an inherited and usually lethal copper deficiency disorder in humans. We have demonstrated that the Menkes protein is directly involved as a copper efflux pump in mammalian cells. Using cells overexpressing the Menkes protein we have provided the first biochemical evidence that this functions as a Cu translocating (across the membrane) P-type ATPase (Voskoboinik et al., FEBS Letters, in press). These studies were carried out using purified plasma membrane vesicles. We are now carrying out structure- function studies on this protein using targeted mutations and assaying using the radiocopper vesicle assay. Recently we have commenced studies on the role of amyloid precursor protein (APP) in copper transport and relationship of this to Alzheimers disease

  5. A Plasmodium falciparum copper-binding membrane protein with copper transport motifs

    OpenAIRE

    Choveaux David L; Przyborski Jude M; Goldring JP

    2012-01-01

    Abstract Background Copper is an essential catalytic co-factor for metabolically important cellular enzymes, such as cytochrome-c oxidase. Eukaryotic cells acquire copper through a copper transport protein and distribute intracellular copper using molecular chaperones. The copper chelator, neocuproine, inhibits Plasmodium falciparum ring-to-trophozoite transition in vitro, indicating a copper requirement for malaria parasite development. How the malaria parasite acquires or secretes copper st...

  6. Nanocrystalline copper based microcomposites

    OpenAIRE

    J.P. Stobrawa; Z.M. Rdzawski; W. Głuchowski; J. Domagała-Dubiel

    2012-01-01

    Purpose: The aim of this work was to investigate microstructure, mechanical properties and deformation behavior of copper microcomposites: Cu- Y2O3, Cu- ZrO2 and Cu-WC produced by powder metallurgy techniques.Design/methodology/approach: Tests were made with Cu-Y2O3, Cu-ZrO2 and Cu-WC microcomposites containing up to 2% of a strengthening phase. The materials were fabricated by powder metallurgy techniques, including milling of powders, followed by their compacting and sintering. The main mec...

  7. The Bauschinger Effect in Copper

    DEFF Research Database (Denmark)

    Pedersen, Ole Bøcker; Brown, L .M.; Stobbs, W. M.

    1981-01-01

    A study of the Bauschinger effect in pure copper shows that by comparison with dispersion hardened copper the effect is very small and independent of temperature. This suggests that the obstacles to flow are deformable. A simple composite model based on this principle accounts for the data semi...

  8. Effects of copper(II) and copper oxides on THMs formation in copper pipe.

    Science.gov (United States)

    Li, Bo; Qu, Jiuhui; Liu, Huijuan; Hu, Chengzhi

    2007-08-01

    Little is known about how the growth of trihalomethanes (THMs) in drinking water is affected in copper pipe. The formation of THMs and chlorine consumption in copper pipe under stagnant flow conditions were investigated. Experiments for the same water held in glass bottles were performed for comparison. Results showed that although THMs levels firstly increased in the presence of chlorine in copper pipe, faster decay of chlorine as compared to the glass bottle affected the rate of THMs formation. The analysis of water phase was supplemented by surface analysis of corrosion scales using X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDX). The results showed the scales on the pipe surface mainly consisted of Cu(2)O, CuO and Cu(OH)(2) or CuCO(3). Designed experiments confirmed that the fast depletion of chlorine in copper pipe was mainly due to effect of Cu(2)O, CuO in corrosion scales on copper pipe. Although copper(II) and copper oxides showed effect on THMs formation, the rapid consumption of chlorine due to copper oxide made THM levels lower than that in glass bottles after 4h. The transformations of CF, DCBM and CDBM to BF were accelerated in the presence of copper(II), cupric oxide and cuprous oxide. The effect of pH on THMs formation was influenced by effect of pH on corrosion of copper pipe. When pH was below 7, THMs levels in copper pipe was higher as compared to glass bottle, but lower when pH was above 7.

  9. Copper: From neurotransmission to neuroproteostasis

    Directory of Open Access Journals (Sweden)

    Carlos M Opazo

    2014-07-01

    Full Text Available Copper is critical for the Central Nervous System (CNS development and function. In particular, different studies have shown the effect of copper at brain synapses, where it inhibits Long Term Potentation (LTP and receptor pharmacology. Paradoxically, according to recent studies copper is required for a normal LTP response. Copper is released at the synaptic cleft, where it blocks glutamate receptors, which explain its blocking effects on excitatory neurotransmission. Our results indicate that copper also enhances neurotransmission through the accumulation of PSD95 protein, which increase the levels of AMPA receptors located at the plasma membrane of the post-synaptic density. Thus, our findings represent a novel mechanism for the action of copper, which may have implications for the neurophysiology and neuropathology of the CNS. These data indicate that synaptic configuration is sensitive to transient changes in transition metal homeostasis. Our results suggest that copper increases GluA1 subunit levels of the AMPA receptor through the anchorage of AMPA receptors to the plasma membrane as a result of PSD-95 accumulation. Here, we will review the role of copper on neurotransmission of CNS neurons. In addition, we will discuss the potential mechanisms by which copper could modulate neuronal proteostasis (neuroproteostasis in the CNS with focus in the Ubiquitin Proteasome System, which is particularly relevant to neurological disorders such Alzheimer’s disease (AD where copper and protein dyshomeostasis may contribute to neurodegeneration. An understanding of these mechanisms may ultimately lead to the development of novel therapeutic approaches to control metal and synaptic alterations observed in AD patients.

  10. Pb Isotope Study of Some Nonferrous Metallic Deposits in China

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Based on Pb-Pb isochron data of more than 40 Precambrian polymetallic deposits, the authors consider that there are four mineralization periods for the Precambrian copper deposits in China, and the major copper deposits were formed at about 1800 Ma; there are three mineralization periods for gold deposits formed from Archaean to Proterozoic. By studying hundreds of lead isotope data from some Mesozoic continental subvolcanic Cu and Ag polymetallic deposits and fine-disseminated gold deposits, the authors found that the calculation based on the lead single-stage evolution model or two-stage evolution model cannot give the true ore-forming ages but can provide more information about mineralization and material sources of the deposits.

  11. Isotope geochemistry. Biological signatures in clumped isotopes of O₂.

    Science.gov (United States)

    Yeung, Laurence Y; Ash, Jeanine L; Young, Edward D

    2015-04-24

    The abundances of molecules containing more than one rare isotope have been applied broadly to determine formation temperatures of natural materials. These applications of "clumped" isotopes rely on the assumption that isotope-exchange equilibrium is reached, or at least approached, during the formation of those materials. In a closed-system terrarium experiment, we demonstrate that biological oxygen (O2) cycling drives the clumped-isotope composition of O2 away from isotopic equilibrium. Our model of the system suggests that unique biological signatures are present in clumped isotopes of O2—and not formation temperatures. Photosynthetic O2 is depleted in (18)O(18)O and (17)O(18)O relative to a stochastic distribution of isotopes, unlike at equilibrium, where heavy-isotope pairs are enriched. Similar signatures may be widespread in nature, offering new tracers of biological and geochemical cycling.

  12. Mo isotope fractionation during hydrothermal evolution of porphyry Cu systems

    Science.gov (United States)

    Shafiei, Behnam; Shamanian, GholamHossein; Mathur, Ryan; Mirnejad, Hassan

    2015-03-01

    We present Mo isotope compositions of molybdenite types from three successive stages of ore deposition in several porphyry copper deposits of the Kerman region, Iran. The data provide new insights into controlling processes on Mo isotope fractionation during the hydrothermal evolution of porphyry systems. The Mo isotope compositions of 27 molybdenite samples show wide variations in δ97Mo ranging from -0.37 to +0.92 ‰. The data reveal that molybdenites in the early and transitional stages of mineralization (preferentially 2H polytypes; δ97Mo mean = 0.35 ‰) have higher δ97Mo values than late stage (mainly 3R polytypes; δ97Mo mean = 0.02 ‰) molybdenites. This trend suggests that fractionation of Mo isotopes occurred in high-temperature stages of mineralization and that hydrothermal systems generally evolve towards precipitation of molybdenite with lower δ97Mo values. Taking into account the genetic models proposed for porphyry Cu deposits along with the temperature-dependent fractionation of Mo isotope ratios, it is proposed that large variations of Mo isotopes in the early and the transitional stages of ore deposition could be controlled by the separation of the immiscible ore-forming fluid phases with different density, pH, and ƒO2 properties (i.e., brine and vapor). The fractionation of Mo isotopes during fluid boiling and Rayleigh distillation processes likely dominates the Mo isotope budget of the remaining ore-forming fluids for the late stage of mineralization. The lower δ97Mo values in the late stage of mineralization can be explained by depletion of the late ore-forming hydrothermal solutions in 97Mo, as these fluids have moved to considerable distance from the source. Finally, the relationship observed between MoS2 polytypes (2H and 3R) and their Mo isotopic compositions can be explained by the molecular vibration theory, in which heavier isotopes are preferentially partitioned into denser primary 2H MoS2 crystals.

  13. Zinc Isotopic Signatures of the Upper Continental Crust

    Science.gov (United States)

    Xia, Y.; Zhang, X.; Zhang, H.; Huang, F.

    2016-12-01

    during magmatic differentiation and the isotopic composition of the bulk Earth. Earth and Planetary Science Letters 369, 34-42 (2013). [2] Little et al., The oceanic mass balance of copper and zinc isotopes, investigated by analysis of their inputs, and outputs to ferromanganese oxide sediments. Geochimica et Cosmochimica Acta 125, 673-693 (2014).

  14. Jiangxi Copper Corporation Builds 900,000-Ton Copper Production Capacity

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>The Eastward Refined Copper Expansion Pro- ject of Guixi Smelting Plant under Jiangxi Copper Corporation has output its first lot of Copper cathode,marking the company’s pos- session of a 900,000-ton copper production ca- pacity.Thus the company further strengthens its position as the top 3 of the copper world.

  15. Stable isotopes. Applications and production; Les isotopes stables. Applications - production

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, S.; Louvet, P.; Soulie, E. [eds.

    1994-12-31

    This conference presents 46 communications concerning stable isotope production, utilization and application, grouped in 6 sessions and posters. The various themes are: biological applications (pharmacology, medical diagnosis, metabolism and protein studies, toxicity and response studies, labelled compounds), analysis procedures (NMR analysis for macromolecules, tracer studies), nuclear applications (utilization of stable isotopes in nuclear reactors), biological, physical and chemical applications (mass transfer, mobility, crystallography, isotopic exchange), stable isotope production (ion chromatography, ion cyclotron resonance, cryogenic distillation).

  16. Experimental investigation on the mechanism of chelation-assisted, copper(II) acetate-accelerated azide-alkyne cycloaddition.

    Science.gov (United States)

    Kuang, Gui-Chao; Guha, Pampa M; Brotherton, Wendy S; Simmons, J Tyler; Stankee, Lisa A; Nguyen, Brian T; Clark, Ronald J; Zhu, Lei

    2011-09-07

    A mechanistic model is formulated to account for the high reactivity of chelating azides (organic azides capable of chelation-assisted metal coordination at the alkylated azido nitrogen position) and copper(II) acetate (Cu(OAc)(2)) in copper(II)-mediated azide-alkyne cycloaddition (AAC) reactions. Fluorescence and (1)H NMR assays are developed for monitoring the reaction progress in two different solvents, methanol and acetonitrile. Solvent kinetic isotopic effect and premixing experiments give credence to the proposed different induction reactions for converting copper(II) to catalytic copper(I) species in methanol (methanol oxidation) and acetonitrile (alkyne oxidative homocoupling), respectively. The kinetic orders of individual components in a chelation-assisted, copper(II)-accelerated AAC reaction are determined in both methanol and acetonitrile. Key conclusions resulting from the kinetic studies include (1) the interaction between copper ion (either in +1 or +2 oxidation state) and a chelating azide occurs in a fast, pre-equilibrium step prior to the formation of the in-cycle copper(I)-acetylide, (2) alkyne deprotonation is involved in several kinetically significant steps, and (3) consistent with prior experimental and computational results by other groups, two copper centers are involved in the catalysis. The X-ray crystal structures of chelating azides with Cu(OAc)(2) suggest a mechanistic synergy between alkyne oxidative homocoupling and copper(II)-accelerated AAC reactions, in which both a bimetallic catalytic pathway and a base are involved. The different roles of the two copper centers (a Lewis acid to enhance the electrophilicity of the azido group and a two-electron reducing agent in oxidative metallacycle formation, respectively) in the proposed catalytic cycle suggest that a mixed valency (+2 and +1) dinuclear copper species be a highly efficient catalyst. This proposition is supported by the higher activity of the partially reduced Cu(OAc)(2) in

  17. Secondary Copper Industry Entered Rapid Growth Period

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    In China’s copper output,secondary copper accounts for about 40%,for power cable industry,the usage percentage of secondary copper is about 50%.Under the favorable policy of the government to vigorously support recycling industry,secondary copper rod enterprises begin to expand,and are confident toward the industry’s potentials.

  18. Unravelling the Chemical Nature of Copper Cuprizone

    OpenAIRE

    Messori, L.; Casini, A.; C.Gabbiani; Sorace, L.; Muniz-Miranda, M.; Zatta, P

    2007-01-01

    During the last 50 years, formation of the highly chromogenic copper cuprizone complex has been exploited for spectrophotometric determinations of copper although the precise chemical nature of the resulting species has never been ascertained; we eventually show here, in contrast to current opinion, that copper cuprizone is a copper(III) complex.

  19. Deformation of C isotopes

    CERN Document Server

    Kanada-Enyo, Y

    2004-01-01

    Systematic analysis of the deformations of proton and neutron densities in even-even C isotopes was done based on the method of antisymmetrized molecular dynamics. The $E2$ transition strength was discussed in relation to the deformation. We analyze the $B(E2;2^+_1\\to 0^+_1)$ in $^{16}$C, which has been recently measured to be abnormally small. The results suggest the difference of the deformations between proton and neutron densities in the neutron-rich C isotopes. It was found that stable proton structure in C isotopes plays an important role in the enhancement the neutron skin structure as well as in the systematics of $B(E2)$ in the neutron-rich C.

  20. Cu Isotopic Composition in Surface Environments and in Biological Systems: A Critical Review

    Directory of Open Access Journals (Sweden)

    Zhuhong Wang

    2017-05-01

    Full Text Available Copper (Cu is a transition metal and an essential micronutrient for organisms, but also one of the most widespread toxic inorganic contaminants at very high content. The research on Cu isotopes has grown rapidly in the last decade. Hitherto, a large number of studies have been published on the theoretical fractionation mechanisms, experimental data and natural variations of Cu isotopes in variable environments and ecosystems. These studies reported a large variation of δ65Cu (−16.49 to +20.04‰ in terrestrial samples and showed that Cu isotopes could be fractionated by various biogeochemical processes to different extent. Several papers have previously reviewed the coupling of Cu and Zn isotope systematics, and we give here a tentative review of the recent publications only on Cu isotopesin variable surface repositories, animals and human beings, with a goal to attract much attention to research on Cu (and other metals behaviors in the environment and biological systems.

  1. Secondary Copper Consumption and Location in China

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正> China is short of copper resources and is alsothe second largest copper consuming country inthe world.The way to overcome the contradic-tion between the resource shortage and fastgrowth in consumption is to import copper rawmaterial in large quantities.Since the 1990’s,China’s import quantity of copper scrap hasincreased considerably.During the last twoyears,China has imported copper scrap worthof US$2.25 billion,1.32 times of the value ofimported copper concentrates in the same pe-riod.China is one of the biggest copper scrap

  2. Isotopes in Condensed Matter

    CERN Document Server

    G Plekhanov, Vladimir

    2013-01-01

    This book provides a concise introduction to the newly created sub-discipline of solid state physics isotopetronics. The role of isotopes in materials and their properties are describe  in this book. The problem of the enigma of the atomic mass in microphysics is briefly discussed.  The range of the applications of isotopes is wide: from biochemical process in living organisms to modern technical applications in quantum information. Isotopetronics promises to improve nanoelectronic and optoelectronic devices. With numerous illustrations this book is useful to researchers, engineers and graduate students.

  3. Atomic Weights and Isotopic Compositions

    Science.gov (United States)

    SRD 144 Atomic Weights and Isotopic Compositions (Web, free access)   The atomic weights are available for elements 1 through 111, and isotopic compositions or abundances are given when appropriate.

  4. Copper-catalyzed formic acid synthesis from CO2 with hydrosilanes and H2O.

    Science.gov (United States)

    Motokura, Ken; Kashiwame, Daiki; Miyaji, Akimitsu; Baba, Toshihide

    2012-05-18

    A copper-catalyzed formic acid synthesis from CO2 with hydrosilanes has been accomplished. The Cu(OAc)2·H2O-1,2-bis(diphenylphosphino)benzene system is highly effective for the formic acid synthesis under 1 atm of CO2. The TON value approached 8100 in 6 h. The reaction pathway was revealed by in situ NMR analysis and isotopic experiments.

  5. Isotopically modified nanoparticles for enhanced detection in bioaccumulation studies

    Science.gov (United States)

    Misra, S.K.; Dybowska, A.; Berhanu, D.; Croteau, M.-N.; Luoma, S.N.; Boccaccini, A.R.; Valsami-Jones, E.

    2012-01-01

    This work presents results on synthesis of isotopically enriched (99% 65Cu) copper oxide nanoparticles and its application in ecotoxicological studies. 65CuO nanoparticles were synthesized as spheres (7 nm) and rods (7 ?? 40 nm). Significant differences were observed between the reactivity and dissolution of spherical and rod shaped nanoparticles. The extreme sensitivity of the stable isotope tracing technique developed in this study allowed determining Cu uptake at exposure concentrations equivalent to background Cu concentrations in freshwater systems (0.2-30 ??g/L). Without a tracer, detection of newly accumulated Cu was impossible, even at exposure concentrations surpassing some of the most contaminated water systems (>1 mg/L). ?? 2011 American Chemical Society.

  6. An Introduction to Copper Deposits in China

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    There are 11 genetic types of copper deposit in China, three of which (porphyry,contact metasomatic and VMS types) are the most important. The copper deposits distribute widely both temporally and spatially in China. The features of copper ores in China are mostly poor in copper tenor and complex in metal associated. The copper metallogeny in China predominantly occurs in three metallogenic megadomains, namely the circum-Pacific, the paleo-Asian and the Tethys-Himalayan.

  7. Discoveries of isotopes by fission

    Indian Academy of Sciences (India)

    M Thoennessen

    2015-09-01

    Of the about 3000 isotopes presently known, about 20% have been discovered in fission. The history of fission as it relates to the discovery of isotopes as well as the various reaction mechanisms leading to isotope discoveries involving fission are presented.

  8. Relations between A-type granites and copper mineralization as exemplified by the Machangqing Cu deposit

    Institute of Scientific and Technical Information of China (English)

    毕献武; 胡瑞忠; 叶造军; 邵树勋

    2000-01-01

    This paper deals with the relations between the Machangqing rockbody which corresponds to the A-type granites and porphyry copper mineralization in terms of petrochemistry, trace element geochemistry, fluid inclusion geochemistry and isotope geochemistry. The results show that the Machangqing porphyry copper deposit was formed from the fluid predominated by mag-matic fluid. This kind of ore-forming fluid was just differentiated from the magma responsible for the A-type granites. Therefore, as viewed from whether they contain water or not, the A-type granites can, at least, be divided into two types: water-bearing and water-free. The water-bearing A-type granites can serve as the host of porphyry copper deposits under certain geological conditions.

  9. Relations between A-type granites and copper mineralization as exemplified by the Machangqing Cu deposit

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    This paper deals with the relations between the Machangqing rockbody which corresponds to the A-type granites and porphyry copper mineralization in terms of petrochemistry,trace element geochemistry,fluid inclusion geochemistry and isotope geochemistry.The results show that the Machangqing porphyry copper deposit was formed from the fluid predominated by magmatic fluid.This kind of ore-forming fluid was just differentiated from the magma responsible for the A-type granites.Therefore,as viewed from whether they contain water or not,the A-type granites can,at least,be divided into two types:water-bearing and water-free.The water-bearing A-type granites can serve as the host of porphyry copper deposits under certain geological conditions.

  10. GEOCHRONOMETRY ISOTOPE GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正>20040631 Chen Jiangfeng (School of Earth and Space Sciences, University of Science and Technology of China, Hefei, Anhui) ; Xie Zhi Relationships Between Rb-Sr, Ar - Ar Geochronometers and Oxygen Isotopic Equilibrium of Intrusions from Eastern Anhui Province, China (Geological Journal of China Universities, ISSN 1006 - 7493, CN 32 -

  11. GEOCHRONOMETRY & ISOTOPE GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>20090432 Zhou Shuqing (School of Energy Resources, China University of Geosciences Beijing 100083, China); Huang Haiping Stable Isotopic Records vs. Important Events in Life Evolution and the Concurrent Environment (Geological Review, ISSN0371-5736, CN11-1952, 54(2), 2008, p.225-231, 3 illus., 1 table, 77 refs.)

  12. GEOCHRONOMETRY & ISOTOPE GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20141014Wang Hairan(State Key Laboratory of Continental Dynamics,Department of Geology,Northwest University,Xi’an710069,China);Zhao Hongge Theory and Application of Zircon U-Pb Isotope Dating Technique(Geology and Resources,ISSN1671-1947,CN21-1458/P,22(3),2013,p.229

  13. GEOCHRONOMETRY & ISOTOPE GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20072750 Huang Sijing(State Key Laboratory of Oil/Gas Reservoir Geology and Exploitation,Chengdu University of Technology,Chengdu 610059,China);Pei Changrong Age Calibration for the Boundary between Lower and Middle Triassic by Strontium Isotope Stratigraphy in Eastern Sichuan Province

  14. GEOCHRONOMETRY & ISOTOPE GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>20070454 Bao Zengkuan (Institute of High Energy Physics, CAS, Beijing 100049, China); Yuan Wanming Apatite (U-Th)/He Dating and Its Application (Acta Petrologica et Mineralogica, ISSN1000-6524, CN11-1966/P, 24(2), 2005, p.126-132, 2 illus., 25 refs.) Key words: isotopic geochronology

  15. Isotopic Implicit Surface Meshing

    NARCIS (Netherlands)

    Boissonnat, Jean-Daniel; Cohen-Steiner, David; Vegter, Gert

    2004-01-01

    This paper addresses the problem of piecewise linear approximation of implicit surfaces. We first give a criterion ensuring that the zero-set of a smooth function and the one of a piecewise linear approximation of it are isotopic. Then, we deduce from this criterion an implicit surface meshing algor

  16. Isotope hydrograph separation

    Energy Technology Data Exchange (ETDEWEB)

    Fritz, P. [UFZ-Umweltforschungszentrum, Centre of Environmental Research Leipzig-Halle, Leipzig (Germany)

    2000-07-01

    Storm-runoff thus reflects the complex hydraulic behaviour of drainage basins and water-links of such systems. Water of different origin may participate in the events and in this lecture, the application of isotope techniques to separate storm hydrographs into different components will be presented.

  17. Forensic Stable Isotope Biogeochemistry

    Science.gov (United States)

    Cerling, Thure E.; Barnette, Janet E.; Bowen, Gabriel J.; Chesson, Lesley A.; Ehleringer, James R.; Remien, Christopher H.; Shea, Patrick; Tipple, Brett J.; West, Jason B.

    2016-06-01

    Stable isotopes are being used for forensic science studies, with applications to both natural and manufactured products. In this review we discuss how scientific evidence can be used in the legal context and where the scientific progress of hypothesis revisions can be in tension with the legal expectations of widely used methods for measurements. Although this review is written in the context of US law, many of the considerations of scientific reproducibility and acceptance of relevant scientific data span other legal systems that might apply different legal principles and therefore reach different conclusions. Stable isotopes are used in legal situations for comparing samples for authenticity or evidentiary considerations, in understanding trade patterns of illegal materials, and in understanding the origins of unknown decedents. Isotope evidence is particularly useful when considered in the broad framework of physiochemical processes and in recognizing regional to global patterns found in many materials, including foods and food products, drugs, and humans. Stable isotopes considered in the larger spatial context add an important dimension to forensic science.

  18. 云南兰坪盆地西缘脉状铜多金属矿床硫、铅同位素组成及成矿示踪%Sulfur and lead isotope compositions and tracing of copper deposits on the western border of the Lanping Basin, Yunnan Province

    Institute of Scientific and Technical Information of China (English)

    张锦让; 温汉捷

    2012-01-01

    云南兰坪盆地西缘脉状铜多金属矿床主要赋存于由砂岩、粉砂岩和页岩组成的碎屑岩建造中.为了查明兰坪盆地西缘脉状铜多金属矿床成矿物质来源,对盆地西缘四个典型脉状铜多金属矿床(科登涧、连城、金满和水泄)的硫、铅同位素的组成进行了分析和对比研究.结果表明,这些矿床的铅同位素组成总体变化较小,且大部分落在盆地沉积地层铅范围内,金满、连城铜矿床可能有部分深源铅的加入.硫同位素特征表明,兰坪盆地西缘脉状铜多金属矿床的硫主要来源于地层硫酸盐的还原作用,其中金满铜矿床和连城铜钼多金属矿床可能有深源硫的混入.各矿床硫同位素不同的特点,除反映各矿床源区硫同位素组成的差异外,可能还与各矿床成矿时不同的物理化学条件(温度、氧逸度、pH值和离子强度等)差异有关.%A large number of vein-type Cu-polymetallic deposits were developed on the western border of the Lanping Basin in western Yunnan Province, which constituted an important Cu-polymetallic mineralization belt. These deposits are hosted in clastic rocks (sandstone, siltite and argillite) of Mesozoic and Cenozoic formation. In order to trace source of ore-forming materials of these deposits, four representative deposits (Jinman, Shuixie, Kedengjian and Liancheng) were selected to analyze sulfur and lead isotopic compositions. Pb isotopic compositions show very narrow variations and mostly fall within the range of the sedimentary rock lead, suggesting that lead in these vein-type Cu-polymetallic deposits is mostly derived from the basement of the basin. However, the Jinman and Liancheng deposits may have deep sources of lead with different Pb isotopic composition. Sulfur isotope analysis show that the reduced sulfur of these vein-type Cu-polymetallic deposits mainly come from the strata sulfate. However, like Pb isotopes, the Jinman and Liancheng deposits have more

  19. Formation of copper-indium-selenide and/or copper-indium-gallium-selenide films from indium selenide and copper selenide precursors

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, Calvin J [Lakewood, CO; Miedaner, Alexander [Boulder, CO; Van Hest, Maikel [Lakewood, CO; Ginley, David S [Evergreen, CO; Nekuda, Jennifer A [Lakewood, CO

    2011-11-15

    Liquid-based indium selenide and copper selenide precursors, including copper-organoselenides, particulate copper selenide suspensions, copper selenide ethylene diamine in liquid solvent, nanoparticulate indium selenide suspensions, and indium selenide ethylene diamine coordination compounds in solvent, are used to form crystalline copper-indium-selenide, and/or copper indium gallium selenide films (66) on substrates (52).

  20. The Revovery of Copper and Cobalt from Oxidized Copper Ore and Converter Slag

    OpenAIRE

    ZİYADANOĞULLARI, Berrin; ZİYADANOĞULLARI, Recep

    1999-01-01

    The aim of this study was to develop a method for obtaining copper and cobalt from oxidized copper ore and converter slag. In order to convert the copper and cobalt into sulfate compounds the main step was to roast the samples obtained by sulfurization and transfer the samples into solution. First the oxidized copper ore was roasted, followed by the mixture of converter slag and oxidized copper ore. Since the levels of copper and cobalt were low, the sulfurization process was carri...

  1. Genome Sequences of Two Copper-Resistant Escherichia coli Strains Isolated from Copper-Fed Pigs

    DEFF Research Database (Denmark)

    Lüthje, Freja L.; Hasman, Henrik; Aarestrup, Frank Møller;

    2014-01-01

    The draft genome sequences of two copper-resistant Escherichia coli strains were determined. These had been isolated from copper-fed pigs and contained additional putative operons conferring copper and other metal and metalloid resistances.......The draft genome sequences of two copper-resistant Escherichia coli strains were determined. These had been isolated from copper-fed pigs and contained additional putative operons conferring copper and other metal and metalloid resistances....

  2. Majorana Electroformed Copper Mechanical Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Overman, Nicole R.; Overman, Cory T.; Kafentzis, Tyler A.; Edwards, Danny J.; Hoppe, Eric W.

    2012-04-30

    The MAJORANA DEMONSTRATOR is a large array of ultra-low background high-purity germanium detectors, enriched in 76Ge, designed to search for zero-neutrino double-beta decay. The DEMONSTRATOR will utilize ultra high purity electroformed copper for a variety of detector components and shielding. A preliminary mechanical evaluation was performed on the Majorana prototype electroformed copper material. Several samples were removed from a variety of positions on the mandrel. Tensile testing, optical metallography, scanning electron microscopy, and hardness testing were conducted to evaluate mechanical response. Analyses carried out on the Majorana prototype copper to this point show consistent mechanical response from a variety of test locations. Evaluation shows the copper meets or exceeds the design specifications.

  3. Hereditary iron and copper deposition

    DEFF Research Database (Denmark)

    Aaseth, Jan; Flaten, Trond Peder; Andersen, Ole

    2007-01-01

    can be successfully treated, emphasizing the importance of early diagnosis. Serum ferritin values, transferrin saturation and genetic analysis are used when diagnosing haemochromatosis. The diagnostics of Wilson's disease depends on the use of urinary copper values, serum ceruloplasmin and liver...

  4. Water isotopes in desiccating lichens

    Science.gov (United States)

    Cuntz, Matthias; Máguas, Cristina; Lakatos, Michael

    2009-01-01

    The stable isotopic composition of water is routinely used as a tracer to study water exchange processes in vascular plants and ecosystems. To date, no study has focussed on isotope processes in non-vascular, poikilohydric organisms such as lichens and bryophytes. To understand basic isotope exchange processes of non-vascular plants, thallus water isotopic composition was studied in various green-algal lichens exposed to desiccation. The study indicates that lichens equilibrate with the isotopic composition of surrounding water vapour. A model was developed as a proof of concept that accounts for the specific water relations of these poikilohydric organisms. The approach incorporates first their variable thallus water potential and second a compartmentation of the thallus water into two isotopically distinct but connected water pools. Moreover, the results represent first steps towards the development of poikilohydric organisms as a recorder of ambient vapour isotopic composition. PMID:19888598

  5. Use of copper radioisotopes in investigating disorders of copper metabolism

    Energy Technology Data Exchange (ETDEWEB)

    Camakaris, J.; Voskoboinik, I.; Brooks, H.; Greenough, M. [University of Melbourne, Parkville, VIC (Australia). Department of Genetics; Smith, S. [Australian Nuclear Science and Technology Organisation (ANSTO), Lucas Heights, NSW (Australia). Radiopharmaceuticals Division; Mercer, J. [Deakin University, Rusden Campus, Clayton, VIC (Australia). Centre of Cellular and Molecular Biology

    1998-12-31

    Full text: Copper is an essential trace element for life as a number of vital enzymes require it. Copper deficiency can lead to neurological disorders, osteoporosis and weakening of arteries. However Cu is also highly toxic and homeostatic mechanisms have evolved to maintain Cu at levels which satisfy requirements but do not cause toxicity. Toxicity is mediated by the oxidative capacity of Cu and its ability to generate toxic free radicals. There are several acquired and inherited diseases due to either Cu toxicity or Cu deficiency. The study of these diseases facilitates identification of genes and proteins involved in copper homeostasis, and this in turn will provide rational therapeutic approaches. Our studies have focused on Menkes disease in humans which is an inherited and usually lethal copper deficiency. Using copper radioisotopes {sup 64}Cu (t 1/2 = 12.8 hr) and {sup 67}Cu (t 1/2 = 61 hr) we have studied the protein which is mutated in Menkes disease. This is a transmembrane copper pump which is responsible for absorption of copper into the body and also functions to pump out excess Cu from cells when Cu is elevated. It is therefore a vital component of normal Cu homeostasis. We have provided the first biochemical evidence that the Menkes protein functions as a P-type ATPase Cu pump (Voskoboinik et al., FEBS Letters, in press) and these data will be discussed. The assay involved pumping of radiocopper into purified membrane vesicles. Furthermore we have transfected normal and mutant Menkes genes into cells and are carrying out structure-function studies. We are also studying the role of amyloid precursor protein (APP) as a Cu transport protein in order to determine how Cu regulates this protein and its cleavage products. These studies will provide vital information on the relationship between Cu and APP and processes which lead to Alzheimers disease

  6. A STUDY ON CARBON ISOTOPE OF CO2 AND CH4 IN WESTERN DIENG PLATEU BY GAS CHROMATOGRAPHY- ISOTOPE RATIO MASS SPECTROMETER (GC-IRMS

    Directory of Open Access Journals (Sweden)

    Hanik Humaida

    2010-06-01

    Full Text Available The carbon isotope can be used to evaluate volcanism phenomenon of volcano. The study of carbon isotope of CO2 and CH4 was carried out in western Dieng Plateau by mass-spectrometer. Before analysis, sampel was separated by gas chromatography using a Porapak-Q column and a FID (Flame Ionization Detector detector. The gas was oxidized by copper oxide at 850oC before being ionized in mass-spectrometer for isotope analysis. The CO2 content in Candradimuka crater (-4.10 O/OO, indicated that the gas may be as volcanic gas. The other CO2 from Sumber and western Gua Jimat, had isotope value  of -10.05 and -12.07 O/OO, respectively, indicating contamination from crustal and subduction material. The carbon isotope of CH4 gas from Pancasan village was -63.42 O/OO, that may be categorized as biogenic gas.   Keywords: isotope, CO2, CH4, Dieng.

  7. The rise of metal radionuclides in medical imaging: copper-64, zirconium-89 and yttrium-86.

    Science.gov (United States)

    Ikotun, Oluwatayo F; Lapi, Suzanne E

    2011-04-01

    Positron emission tomography, with its high sensitivity and resolution, is growing rapidly as an imaging technology for the diagnosis of many disease states. The success of this modality is reliant on instrumentation and the development of effective and novel targeted probes. Initially, research in this area was focused on what we will define in this article as 'standard' PET isotopes (carbon-11, nitrogen-13, oxygen-15 and fluorine-18), but the short half-lives of these isotopes limit radiopharmaceutical development to those that probe rapid biological processes. To overcome these limitations, there has been a rise in nonstandard isotope probe development in recent years. This review focuses on the biological probes and processes that have been examined, in additiom to the preclinical and clinical findings with nonstandard radiometals: copper-64, zirconium-89, and yttrium-86.

  8. Improving Beneficiation of Copper and Iron from Copper Slag by Modifying the Molten Copper Slag

    Directory of Open Access Journals (Sweden)

    Zhengqi Guo

    2016-04-01

    Full Text Available In the paper, a new technology was developed to improve the beneficiation of copper and iron components from copper slag, by modifying the molten slag to promote the mineralization of valuable minerals and to induce the growth of mineral grains. Various parameters, including binary basicity, dosage of compound additive, modification temperature, cooling rate and the end point temperature of slow cooling were investigated. Meanwhile, optical microscope, scanning electron microscope and energy dispersive spectrometer (SEM-EDS was employed to determine the mineralogy of the modified and unmodified slag, as well as to reveal the mechanisms of enhancing beneficiation. The results show that under the proper conditions, the copper grade of rougher copper concentrate was increased from 6.43% to 11.04%, iron recovery of magnetic separation was increased significantly from 32.40% to 63.26%, and other evaluation indexes were changed slightly, in comparison with unmodified copper slag. Moreover, matte and magnetite grains in the modified slag aggregated together and grew obviously to the mean size of over 50 μm, resulting in an improvement of beneficiation of copper and iron.

  9. Renal cortex copper concentration in acute copper poisoning in calves

    Directory of Open Access Journals (Sweden)

    Luis E. Fazzio

    2012-01-01

    Full Text Available The aim of this study was to estimate the diagnostic value of renal cortex copper (Cu concentration in clinical cases of acute copper poisoning (ACP. A total of 97 calves that died due to subcutaneous copper administration were compiled in eleven farms. At least, one necropsy was conducted on each farm and samples for complementary analysis were taken. The degree of autolysis in each necropsy was evaluated. The cases appeared on extensive grazing calf breeding and intensive feedlot farms, in calves of 60 to 200 kg body weight. Mortality varied from 0.86 to 6.96 %, on the farms studied. The first succumbed calf was found on the farms between 6 and 72 hours after the susbcutaneous Cu administration. As discrepancies regarding the reference value arose, the local value (19.9 parts per million was used, confirming the diagnosis of acute copper poisoning in 93% of the analyzed kidney samples. These results confirm the value of analysis of the cortical kidney Cu concentration for the diagnosis of acute copper poisoning.

  10. Chromium isotope variations

    DEFF Research Database (Denmark)

    D'Arcy, Joan Mary

    is incorporated into carbonates. Hence, ancient carbonates can potentially record the Cr isotopic composition (δ53Cr ‰) of seawater in the geological past. Reliable application and interpretation of this proxy requires a detailed knowledge about processes that fractionate Cr on the Earth’s surface...... deposited during the Early Ordovician — a time of known redox instability in ancient oceans – exhibit a significant positive Cr isotope excursion of +0.5‰. This excursion is interpreted as the reductive drawn down of dissolved Cr in seawater in response to the development of a proximal anoxic sink...... of ancient marine sediments can be a useful tool for understanding the cycling of redox sensitive elements on a local scale....

  11. Copper metallurgy at the crossroads

    Directory of Open Access Journals (Sweden)

    Habashi F.

    2007-01-01

    Full Text Available Copper technology changed from the vertical to the horizontal furnace and from the roast reaction to converting towards the end of the last century. However, the horizontal furnace proved to be an inefficient and polluting reactor. As a result many attempts were made to replace it. In the past 50 years new successful melting processes were introduced on an industrial scale that were more energy efficient and less polluting. In addition, smelting and converting were conducted in a single reactor in which the concentrate was fed and the raw copper was produced. The standing problem in many countries, however, is marketing 3 tonnes of sulfuric acid per tonne of copper produced as well as emitting large amounts of excess SO2 in the atmosphere. Pressure hydrometallurgy offers the possibility of liberating the copper industry from SO2 problem. Heap leaching technology has become a gigantic operation. Combined with solvent extraction and electrowinning it contributes today to about 20% of copper production and is expected to grow. Pressure leaching offers the possibility of liberating the copper industry from SO2 problem. The technology is over hundred years old. It is applied for leaching a variety of ores and concentrates. Hydrothermal oxidation of sulfide concentrates has the enormous advantage of producing elemental sulfur, hence solving the SO2 and sulfuric acid problems found in smelters. Precipitation of metals such as nickel and cobalt under hydrothermal conditions has been used for over 50 years. It has the advantage of a compact plant but the disadvantage of producing ammonium sulfate as a co-product. In case of copper, however, precipitation takes place without the need of neutralizing the acid, which is a great advantage and could be an excellent substitute for electrowinning which is energy intensive and occupies extensive space. Recent advances in the engineering aspects of pressure equipment design open the door widely for increased

  12. GEOCHRONOMETRY & ISOTOPE GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>20050934 Chen Zhihong (Chinese Academy of Geological Sciences, Beijing 100037, China); Lu Songnian Age of the Fushui Intermediate-Mafic Intrusive Complex in the Qinling Orogen, New Zircon U - Pb and Whole -Rock Sm and Nd Isotope Chronological Evidence (Geological Bulletin of China, ISSN 1671-2552, CN11-4648/P, 23(4), 2004, p. 322-328, 3 illus. , 3 tables, 10 refs. )

  13. GEOCHRONOMETRY &ISOTOPE GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20131727 Huang Xiaowen(State Key Laboratory of Ore Deposit Geochemistry,Institute of Geochemistry,Chinese Academy of Sciences,Guiyang 550002,China);Qi Liang Preliminary Study on Sample-Preparation for Re-Os Isotopic Dating of Pyrite(Geochimica,ISSN0379-1726,CN44-1398/P,41(4),2012,p.380-386,3illus.,2tables,25refs)Key words:pyrite,Re-Os dating

  14. GEOCHRONOMETRY & ISOTOPE GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20132601 Cui Yurong(Tianjin Institute of Geology and Mineral Resources,China Geological Survey,Tianjin 300170,China);Zhou Hongying In Situ LA-MC-ICP-MS U-Pb Isotopic Dating of Monazite(Acta Geoscientica Sinica,ISSN0375-5444,CN11-1856/P,33(6),2012,p.865-876,6illus.,4tables,41refs.)Key words:monazite,U-Pb dating

  15. ISOTOPE METHODS IN HOMOGENEOUS CATALYSIS.

    Energy Technology Data Exchange (ETDEWEB)

    BULLOCK,R.M.; BENDER,B.R.

    2000-12-01

    The use of isotope labels has had a fundamentally important role in the determination of mechanisms of homogeneously catalyzed reactions. Mechanistic data is valuable since it can assist in the design and rational improvement of homogeneous catalysts. There are several ways to use isotopes in mechanistic chemistry. Isotopes can be introduced into controlled experiments and followed where they go or don't go; in this way, Libby, Calvin, Taube and others used isotopes to elucidate mechanistic pathways for very different, yet important chemistries. Another important isotope method is the study of kinetic isotope effects (KIEs) and equilibrium isotope effect (EIEs). Here the mere observation of where a label winds up is no longer enough - what matters is how much slower (or faster) a labeled molecule reacts than the unlabeled material. The most careti studies essentially involve the measurement of isotope fractionation between a reference ground state and the transition state. Thus kinetic isotope effects provide unique data unavailable from other methods, since information about the transition state of a reaction is obtained. Because getting an experimental glimpse of transition states is really tantamount to understanding catalysis, kinetic isotope effects are very powerful.

  16. New data on the Hyrkkoelae U-Cu mineralization: the behaviour of native copper in a natural environment

    Energy Technology Data Exchange (ETDEWEB)

    Marcos, N. [Helsinki Univ. of Technology, Espoo (Finland); Ahonen, L. [Geological Survey of Finland, Helsinki (Finland)

    1999-05-01

    The Hyrkkoelae Cu-U mineralisation (SW Finland) is studied as an analogue to the behaviour of copper canister in crystalline bedrock. Uranium-native copper and uranium-copper corrosion products interactions are also addressed in this study. The integration of uranium series disequilibrium (USD) studies gives an estimate of the time-scales of the corrosion processes. The mineral assemblages native copper-copper sulfide, copper sulfides - copper iron sulfides, and native copper-copper oxide (cuprite) occur in open fractures at several depth intervals within granite pegmatites (GP). The surfaces of these open fractures have accumulations of uranophane crystals and other unidentified uranyl compounds. The secondary uranium minerals are mainly distributed around copper sulfide grains. Microscopic intergrowths of copper sulfides and uranyl compounds also have been observed. The surface of the fracture where native copper and cuprite occur is covered with uranium-rich smectite. The very low {sup 234}U/{sup 238}U activity ratio (0.29 - 0.39) in the main uranium fraction in smectite indicates chemical stable conditions (e.g., oxidising) during at least a time period comparable to the half-life of the {sup 234}U isotope (T{sub 1/2} = 2.44 x 10{sup 5} a). Groundwater samples were collected from intervals where copper minerals occur within open fractures. The Eh and pH conditions were measured during long-term pumping (2-4 weeks per sample). Eh was measured both in situ and an the surface using three electrodes (Pt, Au, C). The actual groundwater conditions are oxidising and would not allow the sulfidization of native copper. Sulfidization may be considered as on old phenomenon, older than the precipitation of uranyl phases in the samples. The end of sulfidization may be earlier than the precipitation and/or remobilisation of U(VI) phases in a time span from about 2 x 10{sup 5} years (precipitation of uranophane) to 2.44 x 10{sup 5} (remobilisation of U from smectite). (orig.)

  17. Nuclear physics and stable isotopes; Physique nucleaire et isotopes stables

    Energy Technology Data Exchange (ETDEWEB)

    Goutte, D. [CEA Centre d`Etudes de Saclay, 91 - Gif-sur-Yvette (France). Dept. d`Astrophysique, de la Physique des Particules, de la Physique Nucleaire et de l`Instrumentation Associee

    1994-12-31

    The aim of this paper is to show that fundamental research in nuclear physics requires utilization of stable isotopes; stable isotopes are essential as target material since a large quantity of nucleus have to be studied in order to appreciate all the complexity of the nuclear structure, but also as a tool, such as beams, for the same purpose. Examples are given with samarium, tin and germanium isotopes. 7 figs.

  18. Influence of metallothioneins on zinc and copper distribution in brain tumours.

    Science.gov (United States)

    Floriańczyk, Bolesław; Osuchowski, Jacek; Kaczmarczyk, Robert; Trojanowski, Tomasz; Stryjecka-Zimmer, Marta

    2003-01-01

    Metallothioneins take part in the homeostasis of the ions of the metals which are necessary for the proper metabolism of the organism (zinc, copper), in biosynthesis regulation of the zinc-containing proteins and also in the detoxication of metals from the tissues. They also protect the tissue from the effects of free radicals, radiation, electrophilic pharmacological agents used in the cancer therapy and from mutagens. The experimental materials were brain astrocytomas, benign gliomas and malignant gliomas. The levels of the metallothionein were determined by cadmium-haemoglobin affinity assay using the cadmium isotope (109Cd). The values of zinc and copper were determined by means of atomic absorption spectrophotometry. In our studies, the level of metallothioneins in the group of malignant neoplasms was slightly higher than the level of these proteins in the group of benign neoplasms. The correlation coefficient of the studied parameters proved an interrelation between the levels of zinc and copper and the content of metallothioneins. In malignant neoplasms, the level of zinc showed a positive relationship with the metallothionein level, whereas the copper content showed an inverse relationship. There was a statistical difference, but no significant difference, in the levels of copper between malignant and benign groups.

  19. Lead isotope studies of the Guerrero composite terrane, west-central Mexico: implications for ore genesis

    Science.gov (United States)

    Potra, Adriana; Macfarlane, Andrew W.

    2014-01-01

    New thermal ionization mass spectrometry and multi-collector inductively coupled plasma mass spectrometry Pb isotope analyses of three Cenozoic ores from the La Verde porphyry copper deposit located in the Zihuatanejo-Huetamo subterrane of the Guerrero composite terrane are presented and the metal sources are evaluated. Lead isotope ratios of 3 Cenozoic ores from the El Malacate and La Esmeralda porphyry copper deposits located in the Zihuatanejo-Huetamo subterrane and of 14 ores from the Zimapan and La Negra skarn deposits from the adjoining Sierra Madre terrane are also presented to look for systematic differences in the lead isotope trends and ore metal sources among the proposed exotic tectonostratigraphic terranes of southern Mexico. Comparison among the isotopic signatures of ores from the Sierra Madre terrane and distinct subterranes of the Guerrero terrane supports the idea that there is no direct correlation between the distinct suspect terranes of Mexico and the isotopic signatures of the associated Cenozoic ores. Rather, these Pb isotope patterns are interpreted to reflect increasing crustal contribution to mantle-derived magmas as the arc advanced eastward onto a progressively thicker continental crust. The lead isotope trend observed in Cenozoic ores is not recognized in the ores from Mesozoic volcanogenic massive sulfide and sedimentary exhalative deposits. The Mesozoic ores formed prior to the amalgamation of the Guerrero composite terrane to the continental margin, which took place during the Late Cretaceous, in intraoceanic island arc and intracontinental marginal basin settings, while the Tertiary deposits formed after this event in a continental arc setting. Lead isotope ratios of the Mesozoic and Cenozoic ores appear to reflect these differences in tectonic setting of ore formation. Most Pb isotope values of ores from the La Verde deposit (206Pb/204Pb = 18.674-18.719) are less radiogenic than those of the host igneous rocks, but plot within the

  20. Nickel isotopes and methanogens

    Science.gov (United States)

    Neubeck, A.; Ivarsson, M.

    2013-12-01

    Methanogens require Ni for their growth and as a consequence the microbial fractionation of Ni isotopes can be used as a biomarker for activity of methanogenic communities1. Anaerobic laboratory experiments was performed using methanogens to investigate methanogenic growth in a modified nutrient media2 with olivine Fo91 (5g/l) added as an additional mineral nutrient source and as the only H2 provider. One of the investigated methanogens showed an increased growth in the experiments with added olivine. There were also a close relationship between the mobilized Ni and the growth of the methanogen. Ni is an element that previously has been neglected in the study of fossilized microorganisms and their interaction with mineral substrates and, thus, there are no records or published data of Ni in association with microfossils. However, we have detected enrichments of Ni in fossilized microorganisms and ichno-fossils, respectively, from three separate locations. Ni is not present in the host rock in any of the samples. Thus, Ni is present in association with fossilized microorganisms from environments and more extensive analysis is required to understand the magnitude, uptake, preservation and fractionation of Ni in microfossils. In order to analyze Ni isotope fractionation from microbe-mineral interaction, we plan to use a high-resolution Laser-Ablation Time-of-Flight Mass Spectrometer (LMS)3. In situ profile ablation will provide detailed and localized data on fractionation patterns between microfossils and their host rock. Also, this technique will allow us to identify the change in Ni isotopic fractionation in rock samples caused by abiotic and biogenic processes in a faster and easier way and with less risk for contamination compared to the wet chemistry analyses of Ni isotopes. 1. Cameron, V., Vance, D., Archer, C. & House, C. H. A biomarker based on the stable isotopes of nickel. Proceedings of the National Academy of Sciences 106, 10944-10948 (2009). 2. Schn

  1. 21 CFR 73.1125 - Potassium sodium copper chloropyhllin (chlorophyllin-copper complex).

    Science.gov (United States)

    2010-04-01

    ... (chlorophyllin-copper complex). 73.1125 Section 73.1125 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT....1125 Potassium sodium copper chloropyhllin (chlorophyllin-copper complex). (a) Identity. (1) The color additive potassium sodium copper chlorophyllin is a green to black powder obtained from chlorophyll...

  2. 21 CFR 73.2125 - Potassium sodium copper chlorophyllin (chlorophyllin-copper complex).

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Potassium sodium copper chlorophyllin (chlorophyllin-copper complex). 73.2125 Section 73.2125 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT... § 73.2125 Potassium sodium copper chlorophyllin (chlorophyllin-copper complex). (a) Identity...

  3. Testing Corrosion Inhibitors for the Conservation of Archaeological Copper and Copper Alloys

    Directory of Open Access Journals (Sweden)

    Robert B. Faltermeier

    1997-11-01

    Full Text Available This is a synopsis of the Ph.D. research undertaken at the Institute of Archaeology, University College London. The aim was to evaluate corrosion inhibitors for use in the conservation of copper and copper alloy archaeological artefacts. The objective of this work was to acquire an insight into the performance of copper corrosion inhibitors, when applied to archaeological copper.

  4. Therapeutic use of radioactive isotopes

    CERN Multimedia

    Caroline Duc

    2013-01-01

    In December, researchers from ISOLDE-CERN, the Paul Scherrer Institute (PSI) and the Institut Laue-Langevin (ILL) published the results of an in vivo study which successfully proved the effectiveness of four terbium isotopes for diagnosing and treating cancerous tumours.   Four terbium isotopes suitable for clinical purposes. “ISOLDE is the only installation capable of supplying terbium isotopes of such purity and intensity in the case of three out of the four types used in this study,” explains Karl Johnson, a physicist at ISOLDE.  “Producing over a thousand different isotopes, our equipment offers the widest choice of isotopes in the world!” Initially intended for fundamental physics research, ISOLDE has diversified its activities over time to invest in various projects in the materials science, biochemistry and nuclear medicine fields. The proof-of-concept study has confirmed that the four terbium isotopes 149Tb, 152Tb, 155Tb produ...

  5. The link between copper and Wilson's disease.

    Science.gov (United States)

    Purchase, Rupert

    2013-01-01

    Wilson's disease (hepatolenticular degeneration) is a rare inherited autosomal recessive disorder of copper metabolism leading to copper accumulation in the liver and extrahepatic organs such as the brain and cornea. Patients may present with combinations of hepatic, neurological and psychiatric symptoms. Copper is the therapeutic target for the treatment of Wilson's disease. But how did copper come to be linked with Wilson's disease? The answer encompasses a study of enzootic neonatal ataxia in lambs in the 1930s, the copper-chelating properties of British Anti-Lewisite, and the chemical analysis for copper of the organs of deceased Wilson's disease patients in the mid-to-late 1940s. Wilson's disease is one of a number of copper-related disorders where loss of copper homeostasis as a result of genetic, nutritional or environmental factors affects human health.

  6. Determination of copper in clarified apple juices.

    Science.gov (United States)

    Zeiner, Michaela; Juranović Cindrić, Iva; Kröppl, Michaela; Stingeder, Gerhard

    2010-03-24

    Inorganic copper compounds are not considered as synthetic fertilizers for apple trees as they are traditional fertilizers. Thus, they are used in organic farming for soil or foliar applications. The European Union is for health reasons interested in reducing copper in apple orchards. Because the fertilizer application rate affects the nutrition of apples, the applied copper might also be reflected in the copper concentration of apple juices. Thus, the determination of copper is of concern for investigating the application of copper-containing fertilizers. Samples of clarified apple juice commercially available in the European market were analyzed for their copper content. Prior to quantification by inductively coupled plasma-optical emission spectrometry, the juices were processed by a microwave-assisted digestion system using HNO(3). All samples were also measured directly after dilution with HNO(3). The copper concentrations measured using both methods were all below the limit of detection (17 microg/L).

  7. Synthesis of aminoarenethiolato-copper(I) complexes

    NARCIS (Netherlands)

    Sperotto, E.; van Klink, G.P.M.; van Koten, G.

    2008-01-01

    Copper(I)-mediated reactions have recently become the choice for large industrial scale applications, since copper is environmentally friendly and cheaper than other transition metals already explored. However, most organocopper compounds still present several limitations including the sensitivity t

  8. Global assessment of undiscovered copper resources

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Deposits, prospects, and permissive tracts for porphyry and sediment-hosted copper resources worldwide, with estimates of undiscovered copper resources. pCu_tracts...

  9. EFFECT OF COPPER ON PASSIVITY AND CORROSION ...

    African Journals Online (AJOL)

    2014-06-30

    Jun 30, 2014 ... metallic copper enriched on the surface film of austenitic stainless ... Dispersed inclusions of this phase can influence the stability of .... two microstructures showed that copper concentration possessed a non-uniform chemical.

  10. Copper tolerance and virulence in bacteria

    Science.gov (United States)

    Ladomersky, Erik; Petris, Michael J.

    2015-01-01

    Copper (Cu) is an essential trace element for all aerobic organisms. It functions as a cofactor in enzymes that catalyze a wide variety of redox reactions due to its ability to cycle between two oxidation states, Cu(I) and Cu(II). This same redox property of copper has the potential to cause toxicity if copper homeostasis is not maintained. Studies suggest that the toxic properties of copper are harnessed by the innate immune system of the host to kill bacteria. To counter such defenses, bacteria rely on copper tolerance genes for virulence within the host. These discoveries suggest bacterial copper intoxication is a component of host nutritional immunity, thus expanding our knowledge of the roles of copper in biology. This review summarizes our current understanding of copper tolerance in bacteria, and the extent to which these pathways contribute to bacterial virulence within the host. PMID:25652326

  11. Copper-sulfenate complex from oxidation of a cavity mutant of Pseudomonas aeruginosa azurin.

    Science.gov (United States)

    Sieracki, Nathan A; Tian, Shiliang; Hadt, Ryan G; Zhang, Jun-Long; Woertink, Julia S; Nilges, Mark J; Sun, Furong; Solomon, Edward I; Lu, Yi

    2014-01-21

    Metal-sulfenate centers are known to play important roles in biology and yet only limited examples are known due to their instability and high reactivity. Herein we report a copper-sulfenate complex characterized in a protein environment, formed at the active site of a cavity mutant of an electron transfer protein, type 1 blue copper azurin. Reaction of hydrogen peroxide with Cu(I)-M121G azurin resulted in a species with strong visible absorptions at 350 and 452 nm and a relatively low electron paramagnetic resonance gz value of 2.169 in comparison with other normal type 2 copper centers. The presence of a side-on copper-sulfenate species is supported by resonance Raman spectroscopy, electrospray mass spectrometry using isotopically enriched hydrogen peroxide, and density functional theory calculations correlated to the experimental data. In contrast, the reaction with Cu(II)-M121G or Zn(II)-M121G azurin under the same conditions did not result in Cys oxidation or copper-sulfenate formation. Structural and computational studies strongly suggest that the secondary coordination sphere noncovalent interactions are critical in stabilizing this highly reactive species, which can further react with oxygen to form a sulfinate and then a sulfonate species, as demonstrated by mass spectrometry. Engineering the electron transfer protein azurin into an active copper enzyme that forms a copper-sulfenate center and demonstrating the importance of noncovalent secondary sphere interactions in stabilizing it constitute important contributions toward the understanding of metal-sulfenate species in biological systems.

  12. Preparation of Pure Copper Powder from Acidic Copper Chloride Waste Etchant

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The method for the recycling of copper from copper chloride solution was developed. This process consists of extraction of copper, purification and particle size reduction. In the first step, reductive metal scraps were added to acidic copper chloride waste enchants produced in the PCB industry to obtain copper powder.Composition analysis showed that this powder contained impurities such as Fe, Ni, and water. So, drying and purification were carried out by using microwave and a centrifugal separator. Thereby the copper powder had a purity of higher than 99% and spherical form in morphology. The copper powder size was decreased by ball milling.

  13. Lithium isotope separation by laser

    Energy Technology Data Exchange (ETDEWEB)

    Arisawa, T.; Maruyama, Y.; Suzuki, Y.; Shiba, K.

    1982-01-01

    A lithium isotope separation was performed using a laser isotope separation method. It was found that the lithium atoms with a natural isotopic abundance enhanced its /sup 6/Li concentration up to over 90% by tuning the laser wavelength to the /sup 2/Psub(1/2) of /sup 6/Li. Too high power, however, leads to a loss of enrichment due to the power broadening effect which was analysed by the equation of motion of density matrices.

  14. Coating of a steel wire with copper

    Science.gov (United States)

    Vdovin, K. N.; Dubskii, G. A.; Nefed'ev, A. A.; Derevyanko, D. V.

    2016-03-01

    The process of coating of a steel wire with liquid copper at a high speed (>1 m/s) is considered. The results of long-term studies of copperizing under laboratory conditions and electron-microscopic investigation of the copper-steel adhesion are used to develop a mathematical model for coating of a steel wire with copper and to create a commercial setup to implement this process.

  15. Canine Models for Copper Homeostasis Disorders

    OpenAIRE

    Xiaoyan Wu; Leegwater, Peter A. J.; Hille Fieten

    2016-01-01

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurological impairments. A lack in genotype-phenotype correlation in Wilson disease points toward the influence of environmental factors or modifying genes. In a number of Non-Wilsonian forms of copper me...

  16. 49 CFR 192.279 - Copper pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Copper pipe. 192.279 Section 192.279... Copper pipe. Copper pipe may not be threaded except that copper pipe used for joining screw fittings or... heavier wall pipe listed in Table C1 of ASME/ANSI B16.5. [Amdt. 192-62, 54 FR 5628, Feb. 6, 1989, as...

  17. Modulation of tau phosphorylation by environmental copper

    OpenAIRE

    Voss, Kellen; Harris, Christopher; Ralle, Martina; Duffy, Megan; Murchison, Charles; Joseph F. Quinn

    2014-01-01

    Background The transition metal copper enhances amyloid β aggregation and neurotoxicity, and in models of concomitant amyloid and tau pathology, copper also promotes tau aggregation. Since it is not clear if the effects of environmental copper upon tau pathology are dependent on the presence of pathological amyloid β, we tested the effects of copper overload and complexing in disease models which lack pathological amyloid β. Methods We used cell culture and transgenic murine models to test th...

  18. Canine Models for Copper Homeostasis Disorders

    OpenAIRE

    Xiaoyan Wu; Leegwater, Peter A.J.; Hille Fieten

    2016-01-01

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurological impairments. A lack in genotype-phenotype correlation in Wilson disease points toward the influence of environmental factors or modifying genes. In a number of Non-Wilsonian forms of copper me...

  19. Tensile behavior of nanocrystalline copper

    Energy Technology Data Exchange (ETDEWEB)

    Sanders, P.G.; Weertman, J.R. [Northwestern Univ., Evanston, IL (United States). Dept. of Materials Science and Engineering; Eastman, J.A. [Northwestern Univ., Evanston, IL (United States). Dept. of Materials Science and Engineering]|[Argonne National Lab., IL (United States). Materials Science Div.

    1995-11-01

    High density nanocrystalline copper produced by inert gas condensation was tested in tension. Displacements were measured using foil strain gauges, which greatly improved the accuracy of the strain data. The Young`s modulus of nanocrystalline copper was found to be consistent with that of coarse-grained copper. Total elongations of {approx} 1% were observed in samples with grain sizes less than 50 nm, while a sample with a grain size of 110 nm exhibited more than 10% elongation, perhaps signifying a change to a dislocation-based deformation mechanism in the larger-grained material. In addition, tensile tests were performed as a function of strain rate, with a possible trend of decreased strength and increased elongation as the strain rate was decreased.

  20. Monitoring copper in Wilson's disease.

    Science.gov (United States)

    Walshe, J M

    2010-01-01

    Monitoring copper metabolism in patients with Wilson's disease is not an exact science. At present, there are no simple methods of estimating the total body load of this metal. Indirect methods must therefore be used. A survey of the current literature shows that most approaches rely on the determination of blood and urine copper concentration. Both these should decrease with treatment. In parallel with decreased copper concentration, there should be subsequent improvement in more routine laboratory tests including liver and renal function, blood count parameters, and clotting factors. Lack of compliance is revealed by a reversal of this trend. This chapter critically reviews current testing methods and describes other approaches that may be helpful.

  1. Mechanochemical reduction of copper sulfide

    DEFF Research Database (Denmark)

    Balaz, P.; Takacs, L.; Jiang, Jianzhong

    2002-01-01

    The mechanochemical reduction of copper sulfide with iron was induced in a Fritsch P-6 planetary mill, using WC vial filled with argon and WC balls. Samples milled for specific intervals were analyzed by XRD and Mossbauer spectroscopy. Most of the reaction takes place during the first 10 min...... of milling and only FeS and Cu are found after 60 min. The main chemical process is accompanied by phase transformations of the sulfide phases as a result of milling. Djurleite partially transformed to chalcocite and a tetragonal copper sulfide phase before reduction. The cubic modification of FeS was formed...... first, transforming to hexagonal during the later stages of the process. The formation of off-stoichiometric phases and the release of some elemental sulfur by copper sulfide are also probable....

  2. Copper tolerance of Trichoderma species

    Directory of Open Access Journals (Sweden)

    Jovičić-Petrović Jelena

    2014-01-01

    Full Text Available Some Trichoderma strains can persist in ecosystems with high concentrations of heavy metals. The aim of this research was to examine the variability of Trichoderma strains isolated from different ecosystems, based on their morphological properties and restriction analysis of ITS fragments. The fungal growth was tested on potato dextrose agar, amended with Cu(II concentrations ranging from 0.25 to 10 mmol/l, in order to identify copper-resistant strains. The results indicate that some isolated strains of Trichoderma sp. show tolerance to higher copper concentrations. Further research to examine the ability of copper bioaccumulation by tolerant Trichoderma strains is needed. [Projekat Ministarstva nauke Republike Srbije, br. TR 31080 i br. III 43010

  3. Ordovician Intrusive-related Gold-Copper Mineralization in West-Central New South Wales, Australia

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Three major types of Ordovician intrusive-related gold-copper deposits are recognized in central-west New South Wales,, Australia: porphyry, skam and high sulphidation epithermal deposits.These deposits are mainly distributed within two Ordovician volcano-intrusive belts of the Lachlan Fold Be1t: the Orange-Wellington Belt and the Parkes-Narromine Belt. Available isotopic age data suggest that mineralization of the three types of deposits is essentially coeval with the Ordovician intrusive rocks (480-430 Ma). Porphyry gold-copper deposits can be further divided into two groups. The first group is associated with monzoniteshowing shoshonitic features represented by Cadia and Goonumbla. The second group is associated with diorite and dacite, including the Copper Hill and Cargo gold-copper deposits. Gold skarn is associated with Late Ordovician (430-439 Ma) monzonitic intrusive complexes in the Junction Reefs area (Sheahan-Grants, Frenchmans, and Cornishmens), Endeavour 6, 7 and 44, Big and Little Cadia. The epithermal gold deposits with high sulphidation including Gidginbung (Temora) and Peak Hill mainly occur within Ordovician andesite and volcaniclastic rocks, and are associated with advanced argillic alteration. Available isotopic age data indicate that both alteration and mineralization of the porphyry, skam and epithermal gold-copper deposits are broadly coeval with the Late Ordovician hoshonitic mangmatism, which is thought to result from the melting of sub-continental lithosphere caused by Palaeozoic subduction events. The Ordovician intrusive-related gold-copper deposits are restricted to two longitudinal parallel volcano-intrusive belts, rarely extending outside them. Diagonal intra-belt trends of mineralization are common, particularly at the intersections of longitudinal and transverse (oblique) fault/fracture zones basedon the authors'review of available geological data. The locations of these gold-copper deposits are obviously influenced by transverse

  4. LIWU Copper Plans to Get Listed

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>According to recently-released "Notice con-cerning Environmental Protection Checks for IPO of Sichuan LIWU Copper Co., Ltd.", Sichuan LIWU Copper Co., Ltd. (hereinafter referred to as LIWU Copper) plans to issue 68 million shares, and all the funds raised will be

  5. Canine Models for Copper Homeostasis Disorders

    NARCIS (Netherlands)

    Wu, Xiaoyan; Leegwater, Peter A J|info:eu-repo/dai/nl/074236539; Fieten, Hille|info:eu-repo/dai/nl/314112596

    2016-01-01

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurolog

  6. Extra-Hepatic Storage of Copper

    DEFF Research Database (Denmark)

    Heydorn, Kaj; Damsgaard, Else; Horn, N.

    1975-01-01

    The distribution of copper among the organs of an aborted, male foetus, expected to develop Menkes' syndrome, was entirely different from the distribution in 4 normal foetuses. Copper concentrations determined by neutron activation analysis showed a considerably reduced content in the liver......, but increased concentrations in the other organs analysed; total foetal copper was normal....

  7. Quanwei Copper Processing Base Put Into Operation

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>Quanwei (Tongling) Copper Co.,Ltd’s copper processing base in Tongling of Anhui Province has been put into operation at the end of De- cember last year. It is reported that the copper processing project, invested by Zhengwei (Shenzhen) Technology

  8. Study on copper adsorption on olivine

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The copper adsorption on olivine supplied by A/S Olivine production plant at Aheim in western Norway has been studied. The factors which affect the uptake of copper have been evaluated. The results reveal that the equilibrium pH in aqueous solution has the greatest influence on the copper adsorption thanks to the competitive adsorption between proton and copper ions, and the adsorption of copper to olivine increases rapidly with the pH increasing from 4 to 6. The initial copper concentration and olivine dose also possess significant effect on copper adsorption. The adsorption efficieny of copper increases with the increase of olivine dose or the decrease of initial copper concentration at the same pH. The ionic strength effect on the adsorption has also been investigated, but it owns little effect on the adsorption process of copper due to the formation of inner sphere surface complexation of copper on olivine. The experimental data show that olivine has a high acid buffer capacity and is an effective adsorbent for copper.

  9. Canine Models for Copper Homeostasis Disorders

    NARCIS (Netherlands)

    Wu, Xiaoyan; Leegwater, Peter A J; Fieten, Hille

    2016-01-01

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurolog

  10. Preparation of Copper-loaded Microcapsule Formulations

    Directory of Open Access Journals (Sweden)

    Nenad Jalšenjak

    2011-06-01

    Full Text Available Novel copper-loaded chitosan or chitosan/alginate based microcapsules formulations have been presented. It was shown that prolonged release of copper from microcapsules accompanied with possible prolonged presence of copper on leaves is useful in crop protection.

  11. Preparation of Copper-loaded Microcapsule Formulations

    Directory of Open Access Journals (Sweden)

    Nenad Jalšenjak

    2014-02-01

    Full Text Available Novel copper-loaded chitosan or chitosan/alginate based microcapsules formulations have been presented. It was shown that prolonged release of copper from microcapsules accompanied with possible prolonged presence of copper on leaves is useful in crop protection.

  12. Canine Models for Copper Homeostasis Disorders

    NARCIS (Netherlands)

    Wu, Xiaoyan; Leegwater, Peter A J; Fieten, Hille

    2016-01-01

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and

  13. Copper coating specification for the RHIC arcs

    Energy Technology Data Exchange (ETDEWEB)

    Blaskiewicz, M.

    2010-12-01

    Copper coating specifications for the RHIC arcs are given. Various upgrade scenarios are considered and calculations of resistive wall losses in the arcs are used to constrain the necessary quality and surface thickness of a copper coating. We find that 10 {mu}m of high purity copper will suffice.

  14. Distribution of Copper in Rats Submitted to Treatment With Copper Aspirinate

    OpenAIRE

    LIU, Weiping; Yang, Yikun; Xiong, Huizhou; Lu, Ying; Yang, Rong

    1998-01-01

    The distribution of copper in Sprague – Dawley rats following a three month oral administration of 0,10 or 50mg/kg copper aspirinate has been investigated. Metal content was determined by ICP – AES in blood, brain, kidney, liver, lung, spleen, and dejection. The results show that treatment with copper aspirinate did not cause accumulation of copper in rats and excess ingested copper was excreted through feces.

  15. Chinalco Straightened Out Copper Assets, and Delegated Stock Equity of Yunnan Copper

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>Immediately after the news that Chinalco transferred 58%stock equity of Yunnan Copper Group to its wholly-owned subsidiary China Copper Corporation Limited free of charge was disclosed on July 9,many individual investors couldn’t help but to think:Does it mean China Copper Corporation Limited will assemble assets for overall listing?At present,among main copper business companies under China Copper Corporation

  16. A copper vapor laser by using a copper-vapor-complex reaction at a low temperature

    OpenAIRE

    Kano, Toshiyuki; Taniguchi, Hiroshi; Saito, Hiroshi

    1987-01-01

    A copper vapor laser performance by using ametal-vapor-complex reaction (Cu+AlBr3) is reported. The laser operation is obtained at a low temperature without externalheating because of the AlBr3 vapors evaporating at a room temperature. The copper vapor laser using this metal-vapor-complex reaction has an advantage of deposition-free of a metallic copper to the laser tube wall, which is different from the copper halide and the organometallic copper lasers.

  17. Copper metabolism and copper-mediated alterations in the metabolism of cultured astrocytes

    OpenAIRE

    Scheiber, Ivo Florin

    2012-01-01

    Copper is an essential element that is required for a variety of important cellular functions. Since not only copper deficiency, but also excess of copper can seriously affect cellular functions, cellular copper metabolism is tightly regulated. Disturbances of copper homeostasis are the underlying defect of the inherited diseases Menkes and Wilson s disease and have also been linked to several neurodegenerative diseases including Alzheimer s disease and Parkinson s disease. Known astrocytes f...

  18. Geological Characteristics and S-, Pb-isotope Geochemistry of Sareke Copper Deposit in Wuqia County, Xinjiang%新疆乌恰县萨热克铜矿床地质特征及硫、铅同位素地球化学

    Institute of Scientific and Technical Information of China (English)

    李志丹; 薛春纪; 辛江; 王思程; 贾志业; 石海岗; 董新丰; 邵行来

    2011-01-01

    萨热克铜矿是塔里木盆地西北缘中新生界沉积盆地内的大型矿床.矿床定位于托云中生代拉分盆地西缘与东阿赖海西晚期深海盆之间的萨热克巴依中生代断陷盆地内,矿体呈层状、透镜状分布于上侏罗统库孜贡苏组上段(J3k2)灰绿色砾岩层位中,矿石矿物主要为辉铜矿、孔雀石,围岩蚀变较弱.矿石中辉铜矿δ34S=-24.0‰~- 19.0‰,指示硫来自地层中大量硫酸盐的生物还原作用,辉铜矿206Pb/204 Pb比值范围为18.475~18.642,207Pb/204 Pb为15.606~15.676,208Pb/204Pb为38.585 ~38.795,指示成矿金属来自于上地壳和造山带剥蚀区.结合矿床地质及地球化学研究,判断萨热克铜矿是与盆地流体活动相关的砾岩型铜矿.%Sareke copper deposit in Meso-Cenozoic sedimentary basins of northwestern margin of Tarim Basin is a large-scale deposit. The tectonic location of the deposit is located in the Sarekebayi Mesozoic fault basin, which is seated between the western margin of Tuoyun Meso-Cenozoic pull-apart basin and Late Hercynian deep ocean basin in east Alai. The orebodies, with the layered and lens-like shape, occurred in the gray green conglomerate belonging to the second lithologic section of Upper Jurassic Kuzigongsu Formation. The main metallic minerals are chalcoeite and malachite with weak country rock alteration. S S of chalcocite is in the range of -24. 0‰~ -19. 0‰, indicating that the sulfur are mainly derived from biological reduction of the strata sul-fate. The ratio of 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb are 18.475 ~ 18.642, 15.606 ~ 15.676, and 38. 585 ~ 38. 795, respectively, which illustrate that the ore-forming matters are mainly from upper crust and orogenic erosion zone. Geological characteristics and geochemistry of the copper deposit lead to the conclusion that Sareke copper deposit is a basin fluid-related conglomerate type deposit.

  19. Electrochemical nucleation and growth of copper and copper alloys

    Science.gov (United States)

    Shao, Wenbo

    This dissertation aims to contribute to a fundamental understanding of the physicochemical processes occurring in electrochemical nucleation and growth. To this end, the effects of various anions (chloride (Cl-), sulfate (SO42-) and sulfamate (NH2SO 3-)) on the electrochemical kinetics and the mechanism of copper reduction, as well as on the microstructure of the resulting films, were studied. On the basis of this work, the deposition of copper alloys (Cu-Ag with positive heat of mixing, Cu-Au with negative heat of mixing) was investigated with the main objective to achieve an insight on the role of solid state thermodynamics on the electrocrystallization process. Chloride ions cause two competing effects: at low chloride concentration the formation of an adsorbed chloride layer introduces an additional reaction pathway, resulting in an overall depolarization of the reduction process with no significant change of the Tafel slope. At high chloride concentration, complexation phenomena induce a cathodic polarization of the deposition process and a decrease in the Tafel slope. Chlorides cause a decrease in the density and an increased size of copper nuclei. Sulfamate depolarizes copper reduction the most and results in the largest nucleus density. Chloride promotes the faceting, and dendritic growth of copper deposits along direction by introducing interfacial anisotropy. Addition of Ag in the solution or in the electrode substrate enhances copper deposition and results in an additional reduction peak. Codeposition of Cu-Ag increases nucleus density and decreases nucleus size. Such enhancement of copper deposition, the increase in nucleus density and the decrease in nucleus size by Ag could be due to the continued formation of a surface alloy of Cu-Ag and the fast interface dynamics of Ag deposition. Cu can be underpotentially codeposited in the Cu-Au alloy. Homogeneous solid solutions are grown under conditions of underpotential deposition of Cu, while precipitation

  20. Cold regions isotope applications

    Energy Technology Data Exchange (ETDEWEB)

    Perrigo, L.D.; Divine, T.E.

    1976-04-01

    Pacific Northwest Laboratories (PNL) started the Cold Regions Isotope Applications Program in FY-1975 to identify special conditions in the Arctic and similar geographic areas (Cold Regions) where radioisotope power, heater, or sterilization systems would be desirable and economically viable. Significant progress was made in the first year of this program and all objectives for this initial 12-month period were achieved. The major conclusions and recommendations resulting for this effort are described below. The areas of interest covered include: radiosterilization of sewage; heating of septic tanks; and radioisotope thermoelectric generators as power sources for meteorological instruments and navigational aids. (TFD)

  1. Grain boundary and triple junction diffusion in nanocrystalline copper

    Energy Technology Data Exchange (ETDEWEB)

    Wegner, M., E-mail: m.wegner@uni-muenster.de; Leuthold, J.; Peterlechner, M.; Divinski, S. V., E-mail: divin@uni-muenster.de [Institut für Materialphysik, Universität Münster, Wilhelm-Klemm-Straße 10, D-48149, Münster (Germany); Song, X., E-mail: xysong@bjut.edu.cn [College of Materials Science and Engineering, Beijing University of Technology, 100124 Beijing (China); Wilde, G. [Institut für Materialphysik, Universität Münster, Wilhelm-Klemm-Straße 10, D-48149, Münster (Germany); Institute of Nanochemistry and Nanobiology, School of Environmental and Chemical Engineering, Shanghai University, 200444 Shanghai (China)

    2014-09-07

    Grain boundary and triple junction diffusion in nanocrystalline Cu samples with grain sizes, 〈d〉, of ∼35 and ∼44 nm produced by spark plasma sintering were investigated by the radiotracer method using the {sup 63}Ni isotope. The measured diffusivities, D{sub eff}, are comparable with those determined previously for Ni grain boundary diffusion in well-annealed, high purity, coarse grained, polycrystalline copper, substantiating the absence of a grain size effect on the kinetic properties of grain boundaries in a nanocrystalline material at grain sizes d ≥ 35 nm. Simultaneously, the analysis predicts that if triple junction diffusion of Ni in Cu is enhanced with respect to the corresponding grain boundary diffusion rate, it is still less than 500⋅D{sub gb} within the temperature interval from 420 K to 470 K.

  2. The Leuven isotope separator on-line laser ion source

    CERN Document Server

    Kudryavtsev, Y; Franchoo, S; Huyse, M; Gentens, J; Kruglov, K; Müller, W F; Prasad, N V S; Raabe, R; Reusen, I; Van den Bergh, P; Van Duppen, P; Van Roosbroeck, J; Vermeeren, L; Weissman, L

    2002-01-01

    An element-selective laser ion source has been used to produce beams of exotic radioactive nuclei and to study their decay properties. The operational principle of the ion source is based on selective resonant laser ionization of nuclear reaction products thermalized and neutralized in a noble gas at high pressure. The ion source has been installed at the Leuven Isotope Separator On-Line (LISOL), which is coupled on-line to the cyclotron accelerator at Louvain-la-Neuve. sup 5 sup 4 sup , sup 5 sup 5 Ni and sup 5 sup 4 sup , sup 5 sup 5 Co isotopes were produced in light-ion-induced fusion reactions. Exotic nickel, cobalt and copper nuclei were produced in proton-induced fission of sup 2 sup 3 sup 8 U. The b decay of the sup 6 sup 8 sup - sup 7 sup 4 Ni, sup 6 sup 7 sup - sup 7 sup 0 Co, sup 7 sup 0 sup - sup 7 sup 5 Cu and sup 1 sup 1 sup 0 sup - sup 1 sup 1 sup 4 Rh isotopes has been studied by means of beta-gamma and gamma-gamma spectroscopy. Recently, the laser ion source has been used to produce neutron-d...

  3. Electrochemical behaviour of alkaline copper complexes

    Indian Academy of Sciences (India)

    C L Aravinda; S M Mayanna; V R Muralidharan

    2000-10-01

    A search for non-cyanide plating baths for copper resulted in the development of alkaline copper complex baths containing trisodium citrate [TSC] and triethanolamine [TEA]. Voltammetric studies were carried out on platinum to understand the electrochemical behaviour of these complexes. In TSC solutions, the deposition of copper involves the slow formation of a monovalent species. Adsorption of this species obeys Langmuir isotherm. In TEA solutions the deposition involves the formation of monovalent ions obeying the non-activated Temkin isotherm. Conversion of divalent to monovalent copper is also slow. In TEA and TSC alkaline copper solutions, the predominant species that undergo stepwise reduction contain only TEA ligands

  4. Isotopic discrimination of zinc during root-uptake and cellular incorporation in higher plants

    Science.gov (United States)

    Mason, T. F.; Weiss, D. J.; Coles, B. J.; Horstwood, M.; Parrish, R. R.; Zhao, F. J.; Kirk, G. J.

    2003-04-01

    Introduction: Isotopic variability of terrestrial zinc offers a unique tool for studying the geochemical and biochemical cycling of zinc through natural ecosystems. However, to realise this potential, the mechanisms controlling the isotopic composition of zinc during geosphere-biosphere interactions must first be understood. The uptake of zinc by plants involves a variety of abiotic and biochemical reactions, and can provide insights into the types of processes that may fractionate zinc isotopes within living systems. We therefore present an experimental study to quantify if and how zinc isotopes are fractionated during uptake in higher plants. Methodology: Two experimental approaches were taken: (1) a hydroponic study in which rice, lettuce, and tomato cultivars were grown in one of two nutrient solutions (a HEDTA + NTA buffered system, and an EDTA buffered system), and (2) a field-based study in which rice plants were grown in experimental paddy fields under both zinc-sufficient and zinc-deficient conditions. Upon harvest, roots, shoots, nutrient solutions and soils were acid digested, and matrix components were removed from the zinc fraction using anion exchange procedures. For soils the 'bioavailble' zinc fraction was abstracted using a 1 N HCl leaching step. Zinc isotopic compositions were determined on a ThermoElemental Axiom MC-ICP-MS, using copper as an internal reference to correct for mass discrimination effects. Combined measurement errors based on repeated analyses of ultra-pure standards and plant reference materials were EDTA nutrient solutions, the depletion from root to shoot is significantly larger with the former (at -0.15 to -0.25 ppm pamu compared with -0.13 to -0.18 ppm pamu). For rice plants cultivated on zinc-sufficient soils, isotopic enrichment from soil to root (+0.25 ppm pamu), and depletion from root to shoot (-0.11 ppm pamu) were observed. However, under zinc-deficient conditions no significant isotopic shifts between soil, root and

  5. Si Isotopes of Brownleeite

    Science.gov (United States)

    Nakamura-Messenger, K.; Messenger, Scott R.; Ito, M.; Keller, L. P.; Clemett, S. J.; Jones, J. H.; Tatsuoka, H.; Zolensky, M. E.; Tatsuoka, H.

    2010-01-01

    Brownleeite is a manganese silicide, ideally stoichiometric MnSi, not previously observed in nature until its discovery within an interplanetary dust particle (IDP) that likely originated from a comet [1]. Three discrete brownleeite grains in the IDP L2055 I3 (4 microns in size, hereafter IDP I3) were identified with maximum dimensions of 100, 250 and 600 nm and fully analyzed using scanning-transmission electron microscopy (STEM) [1]. One of the grains (100 nm in size) was poikilitically enclosed by low-Fe, Mn-enriched (LIME) olivine. LIME olivine is epitaxial to the brownleeite with the brownleeite (200) parallel to the olivine c* [1]. LIME olivine is an enigmatic phase first reported from chondritic porous IDPs and some unequilibrated ordinary chondrites [ 2], that is commonly observed in chondritic-porous IDPs. Recently, LIME olivine has been also found in comet Wild-2 (Stardust) samples [3], indicating that LIME olivine is a common mineral component of comets. LIME olivine has been proposed to form as a high temperature condensate in the protosolar nebula [2]. Brownleeite grains also likely formed as high-temperature condensates either in the early Solar System or in the outflow of an evolved star or supernova explosion [1]. The isotopic composition of the brownleeite grains may strongly constrain their ultimate source. To test this hypothesis, we performed isotopic analyses of the brownleeite and the associated LIME olivine, using the NASA/JSC NanoSIMS 50L ion microprobe.

  6. Crystallization of copper metaphosphate glass

    Science.gov (United States)

    Bae, Byeong-Soo; Weinberg, Michael C.

    1993-01-01

    The effect of the valence state of copper in copper metaphosphate glass on the crystallization behavior and glass transition temperature has been investigated. The crystallization of copper metaphosphate is initiated from the surface and its main crystalline phase is copper metaphosphate (Cu(PO)3),independent of the (Cu sup 2+)/(Cu(total)). However, the crystal morphology, the relative crystallization rates, and their temperature dependences are affected by the (Cu sup 2+)/(Cu (total)) ratio in the glass. On the other hand, the totally oxidized glass crystallizes from all over the surface. The relative crystallization rate of the reduced glass to the totally oxidized glass is large at low temperature, but small at high temperature. The glass transition temperature of the glass increases as the (Cu sup 2+)/(Cu(total)) ratio is raised. It is also found that the atmosphere used during heat treatment does not influence the crystallization of the reduced glass, except for the formation of a very thin CuO surface layer when heated in air.

  7. Spectroscopic studies of copper enzymes

    Energy Technology Data Exchange (ETDEWEB)

    Dooley, D.M.; Moog, R.; Zumft, W.; Koenig, S.H.; Scott, R.A.; Cote, C.E.; McGuirl, M.

    1986-05-01

    Several spectroscopic methods, including absorption, circular dichroism (CD), magnetic CD (MCD), X-ray absorption, resonance Raman, EPR, NMR, and quasi-elastic light-scattering spectroscopy, have been used to probe the structures of copper-containing amine oxidases, nitrite reductase, and nitrous oxide reductase. The basic goals are to determine the copper site structure, electronic properties, and to generate structure-reactivity correlations. Collectively, the results on the amine oxidases permit a detailed model for the Cu(II) sites in these enzymes to be constructed that, in turn, rationalizes the ligand-binding chemistry. Resonance Raman spectra of the phenylhydrazine and 2,4-dinitrophenyl-hydrazine derivatives of bovine plasma amine oxidase and models for its organic cofactor, e.g. pyridoxal, methoxatin, are most consistent with methoxatin being the intrinsic cofactor. The structure of the Cu(I) forms of the amine oxidases have been investigated by X-ray absorption spectroscopy (XAS); the copper coordination geometry is significantly different in the oxidized and reduced forms. Some anomalous properties of the amine oxidases in solution are explicable in terms of their reversible aggregation, which the authors have characterized via light scattering. Nitrite and nitrous oxide reductases display several novel spectral properties. The data suggest that new types of copper sites are present.

  8. Copper complexes as chemical nucleases

    Indian Academy of Sciences (India)

    Akhil R Chakravarty; Pattubala A N Reddy; Bidyut K Santra; Anitha M Thomas

    2002-08-01

    Redox active mononuclear and binuclear copper(II) complexes have been prepared and structurally characterized. The complexes have planar N-donor heterocyclic bases like 1,10-phenanthroline (phen), dipyridoquinoxaline (dpq) and dipyridophenazine (dppz) ligands that are suitable for intercalation to B-DNA. Complexes studied for nuclease activity have the formulations [Cu(dpq)2(H2O)] (ClO4)2.H2O (1), [{CuL(H2O)}2(-ox)](ClO4)2 (L = bpy, 2; phen, 3; dpq, 4; and dppz, 5) and [Cu(L)(salgly)] (L = bpy, 6; phen, 7; dpq, 8; and dppz, 9), where salgly is a tridentate Schiff base obtained from the condensation of glycine and salicylaldehyde. The dpq complexes are efficient DNA binding and cleavage active species. The dppz complexes show good binding ability but poor nuclease activity. The cleavage activity of the bis-dpq complex is significantly higher than the bis-phen complex of copper(II). The nuclease activity is found to be dependent on the intercalating nature of the complex and on the redox potential of the copper(II)/copper(I) couple. The ancillary ligand plays a significant role in binding and cleavage activity.

  9. Copper proteomes, phylogenetics and evolution.

    Science.gov (United States)

    Decaria, Leonardo; Bertini, Ivano; Williams, Robert J P

    2011-01-01

    This paper is a continuation of our study of the connection between the changing environment and the changing use of particular elements in organisms in the course of their combined evolution (Decaria, Bertini and Williams, Metallomics, 2010, 2, 706). Here we treat the changes in copper proteins in historically the same increasingly oxidising environmental conditions. The study is a bioinformatic analysis of the types and the numbers of copper domains of proteins from 435 DNA sequences of a wide range of organisms available in NCBI, using the method developed by Andreini, Bertini and Rosato in Accounts of Chemical Research 2009, 42, 1471. The copper domains of greatest interest are found predominantly in copper chaperones, homeostatic proteins and redox enzymes mainly used outside the cytoplasm which are in themselves somewhat diverse. The multiplicity of these proteins is strongly marked. The contrasting use of the iron and heme iron proteins in oxidations, mostly in the cytoplasm, is compared with them and with activity of zinc fingers during evolution. It is shown that evolution is a coordinated development of the chemistry of elements with use of novel and multiple copies of their proteins as their availability rises in the environment.

  10. CopperCore Service Integration

    Science.gov (United States)

    Vogten, Hubert; Martens, Harrie; Nadolski, Rob; Tattersall, Colin; van Rosmalen, Peter; Koper, Rob

    2007-01-01

    In an e-learning environment there is a need to integrate various e-learning services like assessment services, collaboration services, learning design services and communication services. In this article we present the design and implementation of a generic integrative service framework, called CopperCore Service Integration (CCSI). We will…

  11. Calcium isotopes in wine

    Science.gov (United States)

    Holmden, C. E.

    2011-12-01

    The δ 44/40Ca values of bottled wine vary between -0.76% to -1.55% on the seawater scale and correlate weakly with inverse Ca concentration and Mg/Ca ratio, such that the lowest δ 44/40Ca values have the highest Ca concentrations and lowest Mg/Ca ratios. The correlation is notable in the sense that the measured wines include both whites and reds sampled from different wine growing regions of the world, and cover a wide range of quality. Trends among the data yield clues regarding the cause of the observed isotopic fractionation. White wines, and wines generally perceived to be of lower quality, have lower δ 44/40Ca values compared to red wines and wines of generally perceived higher quality. Quality was assessed qualitatively through sensory evaluation, price, and scores assigned by critics. The relationship between δ 44/40Ca and wine quality was most apparent when comparing wines of one varietal from one producer from the same growing region. In the vineyard, wine quality is related to factors such as the tonnage of the crop and the ripeness of the grapes at the time of harvesting, the thickness of the skins for reds, the age of the vines, as well as the place where the grapes were grown (terroir). Quality is also influenced by winemaking practices such as fermentation temperature, duration of skin contact, and barrel ageing. Accordingly, the relationship between δ 44/40Ca and wine quality may originate during grape ripening in the vineyard or during winemaking in the cellar. We tested the grape ripening hypothesis using Merlot grapes sampled from a vineyard in the Okanagan, British Columbia, using sugar content (degrees Brix) as an indicator of ripeness. The grapes were separated into pulp, skin, and pip fractions and were analyzed separately. Thus far, there is no clear evidence for a systematic change in δ 44/40Ca values associated with progressive ripening of grapes in the vineyard. On the day of harvesting, the δ 44/40Ca value of juice squeezed from

  12. Reactivity test between beryllium and copper

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, H. [Japan Atomic Energy Research Institute, Ibaraki-ken (Japan); Kato, M. [NGK Insulators, Ltd., Aichi-ken (Japan)

    1995-09-01

    Beryllium has been expected for using as plasma facing material on ITER. And, copper alloy has been proposed as heat sink material behind plasma facing components. Therefore, both materials must be joined. However, the elementary process of reaction between beryllium and copper alloy does not clear in detail. For example, other authors reported that beryllium reacted with copper at high temperature, but it was not obvious about the generation of reaction products and increasing of the reaction layer. In the present work, from this point, for clarifying the elementary process of reaction between beryllium and copper, the out-of-pile compatibility tests were conducted with diffusion couples of beryllium and copper which were inserted in the capsule filled with high purity helium gas (6N). Annealing temperatures were 300, 400, 500, 600 and 700{degrees}C, and annealing periods were 100, 300 and 1000h. Beryllium specimens were hot pressed beryllium, and copper specimens were OFC (Oxygen Free Copper).

  13. Friction stir welding of copper alloys

    Institute of Scientific and Technical Information of China (English)

    Liu Shuhua; Liu Meng; Wang Deqing; Xu Zhenyue

    2007-01-01

    Copper plates,brass plates and copper/brass plates were friction stir welded with various parameters. Experimental results show that the microstructure of the weld is characterized by its much finer grains as contrasted with the coarse grains of parent materials and the heat-affected zones are very narrow. The microhardness of the copper weld is a little higher than that of parent plate. The microhardness of brass weld is about 25% higher than that of parent material. The tensile strength of copper joints increases with increasing welding speed in the test range. The range of parameters to obtain good welds for copper is much wider than that for brass. When different materials were welded, the position of copper plate before welding affected the quality of FSW joints. If the copper plate was put on the advancing side of weld, the good quality of weld could be got under proper parameters.

  14. Catastrophic Oxidation of Copper: A Brief Review

    Science.gov (United States)

    Belousov, V. V.; Klimashin, A. A.

    2012-10-01

    A brief review of the current understanding of copper accelerated oxidation in the presence of low-melting oxides (Bi2O3, MoO3, and V2O5) is given. Special attention is paid to the kinetics, thermodynamics, and mechanisms of accelerated oxidation of copper. The mechanisms of two stages (fast and superfast) of the copper accelerated oxidation are considered. It is shown that the fast oxidation of copper occurs by a diffusion mechanism. Oxygen diffusion along the liquid channels in the oxide scale is the rate-limiting step in the overall mechanism. The superfast oxidation of copper occurs by a fluxing mechanism. Realization of the particular mechanism depends on the mass ratio of low-melting oxide to the metal. The mass ratios of low-melting oxide to the metal and the oxygen partial pressures for superfast oxidation of copper are established. A model of the fast oxidation of copper is discussed.

  15. Process Of Bonding Copper And Tungsten

    Science.gov (United States)

    Slattery, Kevin T.; Driemeyer, Daniel E.

    1999-11-23

    Process for bonding a copper substrate to a tungsten substrate by providing a thin metallic adhesion promoting film bonded to a tungsten substrate and a functionally graded material (FGM) interlayer bonding the thin metallic adhesion promoting film to the copper substrate. The FGM interlayer is formed by thermal plasma spraying mixtures of copper powder and tungsten powder in a varied blending ratio such that the blending ratio of the copper powder and the tungsten powder that is fed to a plasma torch is intermittently adjusted to provide progressively higher copper content/tungsten content, by volume, ratio values in the interlayer in a lineal direction extending from the tungsten substrate towards the copper substrate. The resulting copper to tungsten joint well accommodates the difference in the coefficient of thermal expansion of the materials.

  16. Radiation resistance of copper alloys at high exposure levels

    Energy Technology Data Exchange (ETDEWEB)

    Garner, F.A. (Pacific Northwest Lab., Richland, WA (USA)); Zinkle, S.J. (Oak Ridge National Lab., TN (USA))

    1990-08-01

    Copper alloys are currently being considered for high heat flux applications in fusion power devices. A review is presented of the results of two separate series of experiments on the radiation response of copper and copper alloys. One of these involved pure copper and boron-doped copper in the ORR mixed spectrum reactor. The other series included pure copper and a wide array of copper alloys irradiated in the FFTF fast reactor 16 refs., 13 figs.

  17. Abnormal Copper Homeostasis: Mechanisms and Roles in Neurodegeneration

    OpenAIRE

    Mario Manto

    2014-01-01

    As a cofactor of proteins and enzymes involved in critical molecular pathways in mammals and low eukaryotes, copper is a transition metal essential for life. The intra-cellular and extra-cellular metabolism of copper is under tight control, in order to maintain free copper concentrations at very low levels. Copper is a critical element for major neuronal functions, and the central nervous system is a major target of disorders of copper metabolism. Both the accumulation of copper and copper d...

  18. Smelting chlorination method applied to removal of copper from copper slags

    Institute of Scientific and Technical Information of China (English)

    李磊; 王华; 胡建杭

    2015-01-01

    In order to reasonably utilize the iron resources of copper slags, the smelting chlorination process was used to remove copper from copper slags. Higher holding temperature and O2 flow rate are beneficial to increasing copper removal rate. However, the Cu2O mode is formed by the reaction of surplus O2 and CuCl with O2 flow rate increasing over 0.4 L/min, causing CuCl volatilization rate and copper removal rate to decrease. The resulting copper removal rate of 84.34%is obtained under the optimum conditions of holding temperature of 1573 K, residence time of 10 min, CaCl2 addition amount of 0.1 (mass ratio of CaCl2 and the copper slag) and oxygen flow rate of 0.4 L/min. The efficient removal of copper from copper slags through chlorination is feasible.

  19. Grain Refinement of Deoxidized Copper

    Science.gov (United States)

    Balart, María José; Patel, Jayesh B.; Gao, Feng; Fan, Zhongyun

    2016-10-01

    This study reports the current status of grain refinement of copper accompanied in particular by a critical appraisal of grain refinement of phosphorus-deoxidized, high residual P (DHP) copper microalloyed with 150 ppm Ag. Some deviations exist in terms of the growth restriction factor ( Q) framework, on the basis of empirical evidence reported in the literature for grain size measurements of copper with individual additions of 0.05, 0.1, and 0.5 wt pct of Mo, In, Sn, Bi, Sb, Pb, and Se, cast under a protective atmosphere of pure Ar and water quenching. The columnar-to-equiaxed transition (CET) has been observed in copper, with an individual addition of 0.4B and with combined additions of 0.4Zr-0.04P and 0.4Zr-0.04P-0.015Ag and, in a previous study, with combined additions of 0.1Ag-0.069P (in wt pct). CETs in these B- and Zr-treated casts have been ascribed to changes in the morphology and chemistry of particles, concurrently in association with free solute type and availability. No further grain-refining action was observed due to microalloying additions of B, Mg, Ca, Zr, Ti, Mn, In, Fe, and Zn (~0.1 wt pct) with respect to DHP-Cu microalloyed with Ag, and therefore are no longer relevant for the casting conditions studied. The critical microalloying element for grain size control in deoxidized copper and in particular DHP-Cu is Ag.

  20. Irradiation effects in tungsten-copper laminate composite

    Science.gov (United States)

    Garrison, L. M.; Katoh, Y.; Snead, L. L.; Byun, T. S.; Reiser, J.; Rieth, M.

    2016-12-01

    Tungsten-copper laminate composite has shown promise as a structural plasma-facing component as compared to tungsten rod or plate. The present study evaluated the tungsten-copper composite after irradiation in the High Flux Isotope Reactor (HFIR) at temperatures of 410-780 °C and fast neutron fluences of 0.02-9.0 × 1025 n/m2, E > 0.1 MeV, 0.0039-1.76 displacements per atom (dpa) in tungsten. Tensile tests were performed on the composites, and the fracture surfaces were analyzed with scanning electron microscopy. Before irradiation, the tungsten layers had brittle cleavage failure, but the overall composite had 15.5% elongation at 22 °C. After only 0.0039 dpa this was reduced to 7.7% elongation, and no ductility was observed after 0.2 dpa at all irradiation temperatures when tensile tested at 22 °C. For elevated temperature tensile tests after irradiation, the composite only had ductile failure at temperatures where the tungsten was delaminating or ductile.

  1. Irradiation effects in tungsten-copper laminate composite

    Energy Technology Data Exchange (ETDEWEB)

    Garrison, L. M.; Katoh, Y.; Snead, L. L.; Byun, T. S.; Reiser, J.; Rieth, M.

    2016-12-01

    Tungsten-copper laminate composite has shown promise as a structural plasma-facing component as compared to tungsten rod or plate. The present study evaluated the tungsten-copper composite after irradiation in the High Flux Isotope Reactor (HFIR) at temperatures of 410-780°C and fast neutron fluences of 0.02-9.0×1025 n/m2, E>0.1 MeV, 0.0039-1.76 displacements per atom (dpa) in tungsten. Tensile tests were performed on the composites, and the fracture surfaces were analyzed with scanning electron microscopy. Before irradiation, the tungsten layers had brittle cleavage failure, but the overall composite had 15.5% elongation at 22°C. After only 0.0039 dpa this was reduced to 7.7% elongation, and no ductility was observed after 0.2 dpa at all irradiation temperatures when tensile tested at 22°C. For elevated temperature tensile tests after irradiation, the composite only had ductile failure at temperatures where the tungsten was delaminating or ductile.

  2. The copper metallome in prokaryotic cells.

    Science.gov (United States)

    Rensing, Christopher; McDevitt, Sylvia Franke

    2013-01-01

    As a trace element copper has an important role in cellular function like many other transition metals. Its ability to undergo redox changes [Cu(I) ↔ Cu(II)] makes copper an ideal cofactor in enzymes catalyzing electron transfers. However, this redox change makes copper dangerous for a cell since it is able to be involved in Fenton-like reactions creating reactive oxygen species (ROS). Cu(I) also is a strong soft metal and can attack and destroy iron-sulfur clusters thereby releasing iron which can in turn cause oxidative stress. Therefore, copper homeostasis has to be highly balanced to ensure proper cellular function while avoiding cell damage.Throughout evolution bacteria and archaea have developed a highly regulated balance in copper metabolism. While for many prokaryotes copper uptake seems to be unspecific, others have developed highly sophisticated uptake mechanisms to ensure the availability of sufficient amounts of copper. Within the cytoplasm copper is sequestered by various proteins and molecules, including specific copper chaperones, to prevent cellular damage. Copper-containing proteins are usually located in the cytoplasmic membrane with the catalytic domain facing the periplasm, in the periplasm of Gram-negative bacteria, or they are secreted, limiting the necessity of copper to accumulate in the cytoplasm. To prevent cellular damage due to excess copper, bacteria and archaea have developed various copper detoxification strategies. In this chapter we attempt to give an overview of the mechanisms employed by bacteria and archaea to handle copper and the importance of the metal for cellular function as well as in the global nutrient cycle.

  3. Variations of serum copper values in pregnancy

    Directory of Open Access Journals (Sweden)

    Vukelić Jelka

    2012-01-01

    Full Text Available Introduction. Copper is essential micronutrient and has an important role in the human body. The serum copper increases during pregnancy and is doubled at full term. Lower levels of serum copper in pregnancy are connected with some pathological conditions. Objective. The aim of this study was to estimate the levels of serum copper in normal and pathological pregnancies, comparing them with values of serum copper in non-pregnant women, to determine if serum copper is lower in some pathological pregnancies and if this is of some importance. Methods. A total of 2170 plasma samples for copper analyses were made in the following groups: healthy non-pregnant women; healthy pregnant women from the 5th-40th gestational week, during the first delivery stage and during the first three postpartum weeks, in pregnant women with habitual abortion, imminent abortion, abortion in progress, missed abortion (9th-24th weeks, missed labour and premature rupture of membranes (29th-40th weeks. Levels of serum copper were determined by colorimetric technique of bathocuproin with disulphate as a chromogen. Results. Serum copper values in non-pregnant women range from 11.6-25.8 μmol/L. In healthy pregnant women, there is a constant trend of the increase of serum copper. The mean serum copper values revealed three significant peaks at the 22nd, 27th and 35th gestational week. Serum copper values in the patients with some pathological pregnancies in relation to the serum copper values of the healthy pregnant women were significantly lower. Conclusion. Serum copper values can be used as an indicator of some pathological pregnancies.

  4. Variations of serum copper values in pregnancy.

    Science.gov (United States)

    Vukelić, Jelka; Kapamadzija, Aleksandra; Petrović, Djordje; Grujić, Zorica; Novakov-Mikić, Aleksandra; Kopitović, Vesna; Bjelica, Artur

    2012-01-01

    Copper is essential micronutrient and has an important role in the human body. The serum copper increases during pregnancy and is doubled at full term. Lower levels of serum copper in pregnancy are connected with some pathological conditions. The aim of this study was to estimate the levels of serum copper in normal and pathological pregnancies, comparing them with values of serum copper in non-pregnant women, to determine if serum copper is lower in some pathological pregnancies and if this is of some importance. A total of 2170 plasma samples for copper analyses were made in the following groups: healthy non-pregnant women; healthy pregnant women from the 5th-40th gestational week, during the first delivery stage and during the first three postpartum weeks, in pregnant women with habitual abortion, imminent abortion, abortion in progress, missed abortion (9th-24th weeks), missed labour and premature rupture of membranes (29th-40th weeks). Levels of serum copper were determined by colorimetric technique of bathocuproin with disulphate as a chromogen. Serum copper values in non-pregnant women range from 11.6-25.8 micromol/L. In healthy pregnant women, there is a constant trend of the increase of serum copper. The mean serum copper values revealed three significant peaks at the 22nd, 27th and 35th gestational week. Serum copper values in the patients with some pathological pregnancies in relation to the serum copper values of the healthy pregnant women were significantly lower. Serum copper values can be used as an indicator of some pathological pregnancies.

  5. A Plasmodium falciparum copper-binding membrane protein with copper transport motifs

    Directory of Open Access Journals (Sweden)

    Choveaux David L

    2012-11-01

    Full Text Available Abstract Background Copper is an essential catalytic co-factor for metabolically important cellular enzymes, such as cytochrome-c oxidase. Eukaryotic cells acquire copper through a copper transport protein and distribute intracellular copper using molecular chaperones. The copper chelator, neocuproine, inhibits Plasmodium falciparum ring-to-trophozoite transition in vitro, indicating a copper requirement for malaria parasite development. How the malaria parasite acquires or secretes copper still remains to be fully elucidated. Methods PlasmoDB was searched for sequences corresponding to candidate P. falciparum copper-requiring proteins. The amino terminal domain of a putative P. falciparum copper transport protein was cloned and expressed as a maltose binding fusion protein. The copper binding ability of this protein was examined. Copper transport protein-specific anti-peptide antibodies were generated in chickens and used to establish native protein localization in P. falciparum parasites by immunofluorescence microscopy. Results Six P. falciparum copper-requiring protein orthologs and a candidate P. falciparum copper transport protein (PF14_0369, containing characteristic copper transport protein features, were identified in PlasmoDB. The recombinant amino terminal domain of the transport protein bound reduced copper in vitro and within Escherichia coli cells during recombinant expression. Immunolocalization studies tracked the copper binding protein translocating from the erythrocyte plasma membrane in early ring stage to a parasite membrane as the parasites developed to schizonts. The protein appears to be a PEXEL-negative membrane protein. Conclusion Plasmodium falciparum parasites express a native protein with copper transporter characteristics that binds copper in vitro. Localization of the protein to the erythrocyte and parasite plasma membranes could provide a mechanism for the delivery of novel anti-malarial compounds.

  6. Accumulation and hyperaccumulation of copper in plants

    Science.gov (United States)

    Adam, V.; Trnkova, L.; Huska, D.; Babula, P.; Kizek, R.

    2009-04-01

    Copper is natural component of our environment. Flow of copper(II) ions in the environment depends on solubility of compounds containing this metal. Mobile ion coming from soil and rocks due to volcanic activity, rains and others are then distributed to water. Bio-availability of copper is substantially lower than its concentration in the aquatic environment. Copper present in the water reacts with other compounds and creates a complex, not available for organisms. The availability of copper varies depending on the environment, but moving around within the range from 5 to 25 % of total copper. Thus copper is stored in the sediments and the rest is transported to the seas and oceans. It is common knowledge that copper is essential element for most living organisms. For this reason this element is actively accumulated in the tissues. The total quantity of copper in soil ranges from 2 to 250 mg / kg, the average concentration is 30 mg / kg. Certain activities related to agriculture (the use of fungicides), possibly with the metallurgical industry and mining, tend to increase the total quantity of copper in the soil. This amount of copper in the soil is a problem particularly for agricultural production of food. The lack of copper causes a decrease in revenue and reduction in quality of production. In Europe, shows the low level of copper in total 18 million hectares of farmland. To remedy this adverse situation is the increasing use of copper fertilizers in agricultural soils. It is known that copper compounds are used in plant protection against various illnesses and pests. Mining of minerals is for the development of human society a key economic activity. An important site where the copper is mined in the Slovakia is nearby Smolníka. Due to long time mining in his area (more than 700 years) there are places with extremely high concentrations of various metals including copper. Besides copper, there are also detected iron, zinc and arsenic. Various plant species

  7. The Copper Radioisotopes: A Systematic Review with Special Interest to 64Cu

    Directory of Open Access Journals (Sweden)

    Artor Niccoli Asabella

    2014-01-01

    Full Text Available Copper (Cu is an important trace element in humans; it plays a role as a cofactor for numerous enzymes and other proteins crucial for respiration, iron transport, metabolism, cell growth, and hemostasis. Natural copper comprises two stable isotopes, 63Cu and 65Cu, and 5 principal radioisotopes for molecular imaging applications (60Cu, 61Cu, 62Cu, and 64Cu and in vivo targeted radiation therapy (64Cu and 67Cu. The two potential ways to produce Cu radioisotopes concern the use of the cyclotron or the reactor. A noncopper target is used to produce noncarrier-added Cu thanks to a chemical separation from the target material using ion exchange chromatography achieving a high amount of radioactivity with the lowest possible amount of nonradioactive isotopes. In recent years, Cu isotopes have been linked to antibodies, proteins, peptides, and nanoparticles for preclinical and clinical research; pathological conditions that influence Cu metabolism such as Menkes syndrome, Wilson disease, inflammation, tumor growth, metastasis, angiogenesis, and drug resistance have been studied. We aim to discuss all Cu radioisotopes application focusing on 64Cu and in particular its form 64CuCl2 that seems to be the most promising for its half-life, radiation emissions, and stability with chelators, allowing several applications in oncological and nononcological fields.

  8. EPR of Cu(II) in sarcosine cadmium chloride: probe into dopant site - symmetry and copper-sarcosine interaction

    CERN Document Server

    Pathinettam-Padiyan, D; Murugesan, R

    2000-01-01

    The electron paramagnetic resonance spectra of Cu(II) doped sarcosine cadmium chloride single crystals have been investigated at room temperature. Experimental results reveal that the Cu(II) ion enters the lattice interstitially. The observed superhyperfine lines indicate the superposition of two sets of quintet structure with interaction of nitrogen atoms and the two isotopes of copper. The spin Hamiltonian parameters are evaluated by Schonland method and the electric field symmetry around the copper ion is rhombic. An admixture of d sub z sup 2 orbital with the d sub x sub sup 2 sub - sub y sub sup 2 ground state is observed. Evaluation of MO coefficients reveals that the in-plane interaction between copper and nitrogen is strong in this lattice.

  9. Jiangxi Copper and Yates Joined Hands in High-Grade Copper Foil Project Construction

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正> The construction of a large-scale copper foilproject recently started in the High-Tech De-velopment Zone of Nanchang,the capital ofJiangxi Province.This new copper foil factory,with a designed annual production capacity of6,000 tons of high-grade copper foil,is a jointventure project between Jiangxi Copper Group,the No.1 copper producer in China,and YatesInc.,a leading US copper product company andthe world’s first electrical circuit board maker.

  10. Electrochemical in-situ impregnation of wood using a copper nail as source for copper

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Block, Thomas; Nymark, Morten

    2011-01-01

    A new method for copper impregnation of wood in structures was suggested and tested in laboratory scale with specimen of new pine sapwood. A copper nail and a steel screw were placed in the wood, and an electric direct current field was applied, so the copper nail was anode and the screw...... was cathode. At the anode, copper ions were generated. The copper ions were transported into the wood by electromigration (movement of ions in an applied electric field) towards the cathode, and a volume between the two electrodes was thereby impregnated. Copper also moved to a lesser degree in the opposite...

  11. Tracing contamination sources in soils with Cu and Zn isotopic ratios.

    Science.gov (United States)

    Fekiacova, Z; Cornu, S; Pichat, S

    2015-06-01

    Copper (Cu) and zinc (Zn) are naturally present and ubiquitous in soils and are important micronutrients. Human activities contribute to the input of these metals to soils in different chemical forms, which can sometimes reach a toxic level for soil organisms and plants. Isotopic signatures could be used to trace sources of anthropogenic Cu and Zn pollution. The aim of this paper is to determine whether it is possible to identify (i) Cu and Zn contamination in soils and their sources, on the basis of their isotopic signatures, and (ii) situations that are a priori favorable or not for tracing Cu and Zn pollution using the isotopic approach. Therefore, we compiled data from the literature on Cu and Zn isotopes in soils, rocks and pollutants and added to this database the results of our own research. As only a few studies have dealt with agricultural contamination, we also studied a soil toposequence from Brittany, France, that experienced spreading of pig slurry for tens of years. In the surface horizons of the natural soils, the δ(65)Cu values vary from -0.15 to 0.44‰ and the δ(66)Zn from -0.03 to 0.43‰. Furthermore, vertical variations along soil profiles range from -0.95 to 0.44‰ for δ(65)Cu and from -0.53 to 0.64‰ for δ(66)Zn values. We concluded that pedogenetic processes can produce isotopic fractionation, yet, it is not always discernible and can be overprinted by an exogenous isotopic signature. Furthermore, some contaminants are enriched in heavy Cu or in light Zn compared to the rock or soil, but no generalization can be made. The anthropogenic inputs can be identified based on stable Cu and Zn isotope ratios if the isotope ratios of the sources are different from those of the soil, which needs to be tested for each individual case.

  12. Competition from Isotopic Modelling

    Directory of Open Access Journals (Sweden)

    Virginie Fabre

    2011-01-01

    Full Text Available During later MOIS3, in Europe two populations were present, autochthonous Neanderthals and modern humans. Ecological competition between these two populations has often been evoked but never demonstrated. Our aim is to establish whether resource competition occurred. In this paper, in order to examine the possibility of ecological competition between these two populations, 599 isotopic data were subjected to rigorous statistical treatment and analysis through mixing models. The aim of this paper was to compare dietary strategies of Neanderthals and modern humans over time. Our conclusions suggest that Neanderthals and modern humans shared dietary habits in the particular environmental context of MOIS3 characterised in Europe by climatic deterioration. In this environmental context, the resource competition between Neanderthals and modern humans may have accelerated the disappearance of the Neanderthal population.

  13. Geochemistry of yukon and copper river tributaries, Alaska

    Science.gov (United States)

    Carney, M.; Ellis, A.; Bullen, T.; Langman, J.

    2009-01-01

    Alaska is already beginning to be affected by changes in global climate which make it a good location to study the feedback effects between climate, the water cycle and the carbon cycle. Using river dissolved elements and Sr isotopes we examine changes and/or differences in chemical weathering between watersheds in predominantly permafrost areas and glacial watersheds. Tributaries of the Tanana, Yukon, Nenana and Copper rivers were sampled during the early snow melt in late May and the late permafrost/glacial melt period in September of 2007. Waters are predominantly CaHCO3-/SO4 which is typical of glaciated terrains. 87Sr/86Sr isotopes indicate three potential end-members, young basalts, radiogenic silicates and marine carbonates. The results are consistent with weathering observed in glaciated regions with trace calcites and salts dominating the dissolved load; however we have evidence for silicate weathering. Results also indicate that permafrost watersheds experience more progressive silicate weathering than glacial watersheds. ??2009 ASCE.

  14. Isotope Effects in ESR Spectroscopy

    Directory of Open Access Journals (Sweden)

    Werner Herrmann

    2013-06-01

    Full Text Available In order to present the relationship between ESR spectroscopy and isotope effects three levels are considered: (i ESR spectroscopy is described on a general level up to the models for interpretation of the experimental spectra, which go beyond the usually used time and mass independent spin-Hamilton operator, (ii the main characteristics of the generalized isotope effects are worked out, and finally (iii the basic, mainly quantum mechanical effects are used to describe the coupling of electron spins with the degrees of freedom, which are accessible under the selected conditions, of the respective paramagnetic object under investigation. The ESR parameters and the respective models are formalized so far, that they include the time and mass depending influences and reflect the specific isotope effects. Relations will be established between the effects in ESR spectra to spin relaxation, to spin exchange, to the magnetic isotope effect, to the Jahn-Teller effects, as well as to the influence of zero-point vibrations. Examples will be presented which demonstrate the influence of isotopes as well as the kind of accessible information. It will be differentiated with respect to isotope effects in paramagnetic centres itself and in the respective matrices up to the technique of ESR imaging. It is shown that the use of isotope effects is indispensable in ESR spectroscopy.

  15. Lead isotopes and trace metals in dust at Yucca Mountain

    Science.gov (United States)

    Kwak, Loretta; Neymark, Leonid A.; Peterman, Zell E.

    2008-01-01

    Lead (Pb)-isotope compositions and trace-metal concentrations were determined for samples of dust collected from underground and surface locations at and near the proposed radioactive waste repository at Yucca Mountain, Nevada. Rare earth element concentrations in the dust samples from the underground tunnels are similar to those in wholerock samples of the repository host rocks (Miocene Tiva Canyon Tuff and Topopah Spring Tuff), supporting interpretation that the subsurface dust is mainly composed of rock comminuted during tunnel construction. Other trace metals (arsenic, cadmium, cobalt, chromium, copper, manganese, nickel, lead, antimony, thallium, and zinc) are variably enriched in the subsurface dust samples relative to the average concentrations in the host rocks. Average concentrations of arsenic and lead in dust samples, high concentrations of which can cause corrosion of waste canisters, have enrichment factors from 1.2 to 1.6 and are insignificant relative to the range of concentrations for these metals observed in the host rock samples. Most dust samples from surface sites also are enriched in many of these trace metals relative to average repository host rocks. At least some of these enrichments may be artifacts of sampling. Plotted on a 208Pb/206Pb-207Pb/206Pb graph, Pb-isotope compositions of dust samples from underground sites form a mixing line extending from host-rock Pb-isotope compositions towards compositions of many of the dust samples from surface sites; however, combined Pb concentration and isotope data indicate the presence of a Pbenriched component in the subsurface dust that is not derived from host rock or surface dust and may derive from anthropogenic materials introduced into the underground environment.

  16. Canine Models for Copper Homeostasis Disorders

    Directory of Open Access Journals (Sweden)

    Xiaoyan Wu

    2016-02-01

    Full Text Available Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurological impairments. A lack in genotype-phenotype correlation in Wilson disease points toward the influence of environmental factors or modifying genes. In a number of Non-Wilsonian forms of copper metabolism, the underlying genetic defects remain elusive. Several pure bred dog populations are affected with copper-associated hepatitis showing similarities to human copper metabolism disorders. Gene-mapping studies in these populations offer the opportunity to discover new genes involved in copper metabolism. Furthermore, due to the relatively large body size and long life-span of dogs they are excellent models for development of new treatment strategies. One example is the recent use of canine organoids for disease modeling and gene therapy of copper storage disease. This review addresses the opportunities offered by canine genetics for discovery of genes involved in copper metabolism disorders. Further, possibilities for the use of dogs in development of new treatment modalities for copper storage disorders, including gene repair in patient-derived hepatic organoids, are highlighted.

  17. Canine Models for Copper Homeostasis Disorders.

    Science.gov (United States)

    Wu, Xiaoyan; Leegwater, Peter A J; Fieten, Hille

    2016-02-04

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurological impairments. A lack in genotype-phenotype correlation in Wilson disease points toward the influence of environmental factors or modifying genes. In a number of Non-Wilsonian forms of copper metabolism, the underlying genetic defects remain elusive. Several pure bred dog populations are affected with copper-associated hepatitis showing similarities to human copper metabolism disorders. Gene-mapping studies in these populations offer the opportunity to discover new genes involved in copper metabolism. Furthermore, due to the relatively large body size and long life-span of dogs they are excellent models for development of new treatment strategies. One example is the recent use of canine organoids for disease modeling and gene therapy of copper storage disease. This review addresses the opportunities offered by canine genetics for discovery of genes involved in copper metabolism disorders. Further, possibilities for the use of dogs in development of new treatment modalities for copper storage disorders, including gene repair in patient-derived hepatic organoids, are highlighted.

  18. Nanoscale Copper and Copper Compounds for Advanced Device Applications

    Science.gov (United States)

    Chen, Lih-Juann

    2016-12-01

    Copper has been in use for at least 10,000 years. Copper alloys, such as bronze and brass, have played important roles in advancing civilization in human history. Bronze artifacts date at least 6500 years. On the other hand, discovery of intriguing properties and new applications in contemporary technology for copper and its compounds, particularly on nanoscale, have continued. In this paper, examples for the applications of Cu and Cu alloys for advanced device applications will be given on Cu metallization in microelectronics devices, Cu nanobats as field emitters, Cu2S nanowire array as high-rate capability and high-capacity cathodes for lithium-ion batteries, Cu-Te nanostructures for field-effect transistor, Cu3Si nanowires as high-performance field emitters and efficient anti-reflective layers, single-crystal Cu(In,Ga)Se2 nanotip arrays for high-efficiency solar cell, multilevel Cu2S resistive memory, superlattice Cu2S-Ag2S heterojunction diodes, and facet-dependent Cu2O diode.

  19. Antimicrobial activity of different copper alloy surfaces against copper resistant and sensitive Salmonella enterica.

    Science.gov (United States)

    Zhu, Libin; Elguindi, Jutta; Rensing, Christopher; Ravishankar, Sadhana

    2012-05-01

    Copper has shown antibacterial effects against foodborne pathogens. The objective of this study was to evaluate the antibacterial activity of copper surfaces on copper resistant and sensitive strains of Salmonella enterica. Six different copper alloy coupons (60-99.9% copper) were tested along with stainless steel as the control. The coupons were surface inoculated with either S. Enteritidis or one of the 3 copper resistant strains, S. Typhimurium S9, S19 and S20; stored under various incubation conditions at room temperature; and sampled at various times up to 2 h. The results showed that under dry incubation conditions, Salmonella only survived 10-15 min on high copper content alloys. Salmonella on low copper content alloys showed 3-4 log reductions. Under moist incubation conditions, no survivors were detected after 30 min-2 h on high copper content alloys, while the cell counts decreased 2-4 logs on low copper content coupons. Although the copper resistant strains survived better than S. Enteritidis, they were either completely inactivated or survival was decreased. Copper coupons showed better antimicrobial efficacy in the absence of organic compounds. These results clearly show the antibacterial effects of copper and its potential as an alternative to stainless steel for selected food contact surfaces.

  20. Evaluation of copper resistant bacteria from vineyard soils and mining waste for copper biosorption

    Directory of Open Access Journals (Sweden)

    R Andreazza

    2011-03-01

    Full Text Available Vineyard soils are frequently polluted with high concentrations of copper due application of copper sulfate in order to control fungal diseases. Bioremediation is an efficient process for the treatment of contaminated sites. Efficient copper sorption bacteria can be used for bioremoval of copper from contaminated sites. In this study, a total of 106 copper resistant bacteria were examined for resistance to copper toxicity and biosorption of copper. Eighty isolates (45 from vineyard Mollisol, 35 from Inceptisol were obtained from EMBRAPA (Empresa Brasileira de Pesquisa Agropecuária experimental station, Bento Gonçalves, RS, Brazil (29º09'53.92''S and 51º31'39.40''W and 26 were obtained from copper mining waste from Caçapava do Sul, RS, Brazil (30º29'43.48''S and 53'32'37.87W. Based on resistance to copper toxicity and biosorption, 15 isolates were identified by 16S rRNA gene sequencing. Maximal copper resistance and biosorption at high copper concentration were observed with isolate N2 which removed 80 mg L-1 in 24 h. Contrarily isolate N11 (Bacillus pumilus displayed the highest specific copper biosorption (121.82 mg/L/OD unit in 24 h. GenBank MEGABLAST analysis revealed that isolate N2 is 99% similar to Staphylococcus pasteuri. Results indicate that several of our isolates have potential use for bioremediation treatment of vineyards soils and mining waste contaminated with high copper concentration.

  1. Evaluation of copper resistant bacteria from vineyard soils and mining waste for copper biosorption.

    Science.gov (United States)

    Andreazza, R; Pieniz, S; Okeke, B C; Camargo, F A O

    2011-01-01

    Vineyard soils are frequently polluted with high concentrations of copper due application of copper sulfate in order to control fungal diseases. Bioremediation is an efficient process for the treatment of contaminated sites. Efficient copper sorption bacteria can be used for bioremoval of copper from contaminated sites. In this study, a total of 106 copper resistant bacteria were examined for resistance to copper toxicity and biosorption of copper. Eighty isolates (45 from vineyard Mollisol, 35 from Inceptisol) were obtained from EMBRAPA (Empresa Brasileira de Pesquisa Agropecuária) experimental station, Bento Gonçalves, RS, Brazil (29°09'53.92″S and 51°31'39.40″W) and 26 were obtained from copper mining waste from Caçapava do Sul, RS, Brazil (30°29'43.48″S and 53'32'37.87W). Based on resistance to copper toxicity and biosorption, 15 isolates were identified by 16S rRNA gene sequencing. Maximal copper resistance and biosorption at high copper concentration were observed with isolate N2 which removed 80 mg L(-1) in 24 h. Contrarily isolate N11 (Bacillus pumilus) displayed the highest specific copper biosorption (121.82 mg/L/OD unit in 24 h). GenBank MEGABLAST analysis revealed that isolate N2 is 99% similar to Staphylococcus pasteuri. Results indicate that several of our isolates have potential use for bioremediation treatment of vineyards soils and mining waste contaminated with high copper concentration.

  2. The Present Conditions of China’s Copper Industry

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>China’s copper industry has formed a complete production system and by the end of 2004, China had 600,000 tons of copper mining capacities, 1.5 million tons of copper smelting capacities, 2.15 million tons of copper refining capacities and 3.8 million tons of copper fabricating capacities.

  3. Isotope-edited infrared spectroscopy.

    Science.gov (United States)

    Buchner, Ginka S; Kubelka, Jan

    2012-01-01

    Isotope-edited infrared (IR) spectroscopy is a powerful tool for studying structural and dynamical properties of peptides and proteins with site-specific resolution. Labeling of selected amide carbonyls with (13)C results in detectable sidebands of amide I' vibrations, which provide information about local conformation and/or solvent exposure without structural perturbation to the protein. Incorporation of isotopically labeled amino acids at specific positions is achieved by the chemical synthesis of the studied proteins. We describe the basic procedures for synthesis of (13)C isotopically edited protein samples, experimental IR spectroscopic measurements, and analysis of the site-specific structural changes from the thermal unfolding IR data.

  4. Compelling Research Opportunities using Isotopes

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-04-23

    Isotopes are vital to the science and technology base of the US economy. Isotopes, both stable and radioactive, are essential tools in the growing science, technology, engineering, and health enterprises of the 21st century. The scientific discoveries and associated advances made as a result of the availability of isotopes today span widely from medicine to biology, physics, chemistry, and a broad range of applications in environmental and material sciences. Isotope issues have become crucial aspects of homeland security. Isotopes are utilized in new resource development, in energy from bio-fuels, petrochemical and nuclear fuels, in drug discovery, health care therapies and diagnostics, in nutrition, in agriculture, and in many other areas. The development and production of isotope products unavailable or difficult to get commercially have been most recently the responsibility of the Department of Energy's Nuclear Energy program. The President's FY09 Budget request proposed the transfer of the Isotope Production program to the Department of Energy's Office of Science in Nuclear Physics and to rename it the National Isotope Production and Application program (NIPA). The transfer has now taken place with the signing of the 2009 appropriations bill. In preparation for this, the Nuclear Science Advisory Committee (NSAC) was requested to establish a standing subcommittee, the NSAC Isotope Subcommittee (NSACI), to advise the DOE Office of Nuclear Physics. The request came in the form of two charges: one, on setting research priorities in the short term for the most compelling opportunities from the vast array of disciplines that develop and use isotopes and two, on making a long term strategic plan for the NIPA program. This is the final report to address charge 1. NSACI membership is comprised of experts from the diverse research communities, industry, production, and homeland security. NSACI discussed research opportunities divided into three areas: (1

  5. Carbon isotope geochemistry and geobiology

    Science.gov (United States)

    Desmarais, D.

    1985-01-01

    Carbon isotope fractionation values were used to understand the history of the biosphere. For example, plankton analyses confirmed that marine extinctions at the end of the Cretaceous period were indeed severe (see Hsu's article in Sundquist and Broeker, 1984). Variations in the isotopic compositions of carbonates and evaporitic sulfates during the Paleozoic reflect the relative abundances of euxinic (anoxic) marine environments and organic deposits from terrestrial flora. The carbon isotopic composition of Precambrian sediments suggest that the enzyme ribulose bisphosphate carboxylase has existed for perhaps 3.5 billion years.

  6. Spectroscopic study of copper(II) complexes with carboxymethyl dextran and dextran sulfate

    Science.gov (United States)

    Glišić, S.; Nikolić, G.; Cakić, M.; Trutić, N.

    2015-07-01

    The copper(II) ion complexes with carboxymethyl dextran (CMD) and dextran sulfate (DS) were studied by different methods. Content of copper was determined by atomic absorption spectroscopy. It was found that copper : ligand mole ratio (Cu : CMD) is 1 : 2, and Cu : DS is 1 : 1 by mole ratio method. Spectrophotometric parameters of synthesized compounds are characteristic for Cu(II) ion in octahedral ( O h ) coordination. Analyzing of FTIR spectra in ν(C=O) vibration region has showed that -COOH group acts as bidentate ligand, while the compounds of Cu(II) with DS copper ions are in the region of four oxygen atoms of two adjacent sulfo groups. The presence of crystalline water was determined by isotopic substitution of H2O molecules with D2O molecules. Comparison of spectra recorded at room (RT) and liquid nitrogen temperature (LNT) has enabled detection bands of water molecules libration indicating that they are coordinated complementing coordination sphere of Cu(II) ions to six. The complexes are of Cu(II) · (CMD)2 · (H2O)2 or Cu(II) · DS · (H2O)2 type. The similarities of the γ(C-H) range in a part of FTIR spectra indicate that there is no difference in the conformation of the 4 C 1 glucopyranose (Glc) unit CMD and DS synthesized Cu(II) complexes.

  7. Apparatus and process for separating hydrogen isotopes

    Science.gov (United States)

    Heung, Leung K; Sessions, Henry T; Xiao, Xin

    2013-06-25

    The apparatus and process for separating hydrogen isotopes is provided using dual columns, each column having an opposite hydrogen isotopic effect such that when a hydrogen isotope mixture feedstock is cycled between the two respective columns, two different hydrogen isotopes are separated from the feedstock.

  8. Thermoelectric Study of Copper Selenide

    Science.gov (United States)

    Yao, Mengliang; Liu, Weishu; Ren, Zhifeng; Opeil, Cyril

    2014-03-01

    Nanostructuring has been shown to be an effective approach in reducing lattice thermal conductivity and improving the figure of merit of thermoelectric materials. Copper selenide is a layered structure material, which has a low thermal conductivity and p-type Seebeck coefficient at low temperatures. We have evaluated several hot-pressed, nanostructured copper selenide samples with different dopants for their thermoelectric properties. The phenomenon of the charge-density wave observed in the nanocomposite, resistivity, Seebeck, thermal conductivity and carrier mobility will be discussed. Funding for this research was provided by the Solid State Solar - Thermal Energy Conversion Center (S3TEC), an Energy Frontier Research Center sponsored by the DOE, Office of Basic Energy Science, Award No. DE-SC0001299/ DE-FG02-09ER46577.

  9. Rapid iodometric determination of copper in some copper-base alloys

    NARCIS (Netherlands)

    Agterdenbos, J.; Eelberse, P.A.

    1966-01-01

    Copper-base alloys, especially those containing tin, are readily dissolved in a mixture of hydrofluoric and nitric acids. In the resulting solution copper can be titrated iodometrically in the conventional manner.

  10. Xinjiang Non-ferrous Metals Wuxin Copper 100,000-ton Cathode Copper Project Commences

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>The construction of Xinjiang Nonferrous Met-als’ Wuxin Copper’s 100,000-ton Cathode Copper Project commenced at the Fukang Xin-jiang Industrial Park of Innovative Non-Ferrous Materials recently. Xinjiang Wuxin Copper

  11. Explosive compact-coating of tungsten–copper alloy to a copper surface

    Science.gov (United States)

    Chen, Xiang; Li, Xiaojie; Yan, Honghao; Wang, Xiaohong; Miao, Yusong

    2017-03-01

    This study proposed a new method for coating tungsten–copper alloy to copper surface. First, the tungsten–copper alloy powder was pre-compacted to the copper surface. Then, the powder in the hydrogen atmosphere was sintered, and the pre-compacted powder was compacted by explosive compact-coating. Finally, diffusion sintering was conducted to improve the density of the coating layer. The theoretical density of the coating reached 99.3%. Microstructure characteristics indicated that tungsten and copper powders were well mixed. Tungsten particles were larger than copper particles. Scanning electron microscope (SEM) fracture surface analysis was different from the traditional fracture of metals. Coating and substrate joint surfaces, which were analyzed by SEM, indicated that the tungsten–copper alloy was sintered on the copper surface. The hardness of the coating layer was 197.6–245.2 HV, and the hardness of the substrate was approximately 55 HV.

  12. Reduction reaction analysis of nanoparticle copper oxide for copper direct bonding using formic acid

    Science.gov (United States)

    Fujino, Masahisa; Akaike, Masatake; Matsuoka, Naoya; Suga, Tadatomo

    2017-04-01

    Copper direct bonding is required for electronics devices, especially power devices, and copper direct bonding using formic acid is expected to lower the bonding temperature. In this research, we analyzed the reduction reaction of copper oxide using formic acid with a Pt catalyst by electron spin resonance analysis and thermal gravimetry analysis. It was found that formic acid was decomposed and radicals were generated under 200 °C. The amount of radicals generated was increased by adding the Pt catalyst. Because of these radicals, both copper(I) oxide and copper(II) oxide start to be decomposed below 200 °C, and the reduction of copper oxide is accelerated by reactants such as H2 and CO from the decomposition of formic acid above 200 °C. The Pt catalyst also accelerates the reaction of copper oxide reduction. Herewith, it is considered that the copper surface can be controlled more precisely by using formic acid to induce direct bonding.

  13. ANALYSIS AND DEVELOPMENT OF COPPER RECYCLING OF DEAD COPPER-CONTAINING CATALYSTS

    OpenAIRE

    O. S. Komarov; I. V. Provorova; V. I. Volosatikov; D. O. Komarov; N. I. Urbanovich

    2009-01-01

    The technology of processing of copper-bearing dead catalysts, which includes leaching and deposition of copper by means of electrolysis and also their application in composition of the mixture for alloy doping is offered.

  14. ANALYSIS AND DEVELOPMENT OF COPPER RECYCLING OF DEAD COPPER-CONTAINING CATALYSTS

    Directory of Open Access Journals (Sweden)

    O. S. Komarov

    2009-01-01

    Full Text Available The technology of processing of copper-bearing dead catalysts, which includes leaching and deposition of copper by means of electrolysis and also their application in composition of the mixture for alloy doping is offered.

  15. LEP Radio Frequency Copper Cavity

    CERN Multimedia

    The pulse of a particle accelerator. 128 of these radio frequency cavities were positioned around CERN's 27-kilometre LEP ring to accelerate electrons and positrons. The acceleration was produced by microwave electric oscillations at 352 MHz. The electrons and positrons were grouped into bunches, like beads on a string, and the copper sphere at the top stored the microwave energy between the passage of individual bunches. This made for valuable energy savings as it reduced the heat generated in the cavity.

  16. Yunnan Copper Co., Ltd. Invested 1.5 Billion Yuan for 200,000-Ton Refined Copper Project in Baoding

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>Yunnan Copper(Group)Co.,Ltd.has signed a strategic agreement with Baoding Municipal Government of Heibei Province in Kunming on the joint development of a copper smelting project.With the joint investment from Baoding Xinxian Government,Yunnan Copper Co.,Ltd.and Baoding Dali Copper Ltd,a copper refinery with an annual capacity of

  17. Functional understanding of the versatile protein copper metabolism MURR1 domain 1 (COMMD1) in copper homeostasis

    NARCIS (Netherlands)

    Fedoseienko, Alina; Bartuzi, Paulina; van de Sluis, Bart

    2014-01-01

    Copper is an important cofactor in numerous biological processes in all living organisms. However, excessive copper can be extremely toxic, so it is vital that the copper level within a cell is tightly regulated. The damaging effect of copper is seen in several hereditary forms of copper toxicity in

  18. In situ Fabrication of Monolithic Copper Azide

    Science.gov (United States)

    Li, Bing; Li, Mingyu; Zeng, Qingxuan; Wu, Xingyu

    2016-04-01

    Fabrication and characterization of monolithic copper azide were performed. The monolithic nanoporous copper (NPC) with interconnected pores and nanoparticles was prepared by decomposition and sintering of the ultrafine copper oxalate. The preferable monolithic NPC can be obtained through decomposition and sintering at 400°C for 30 min. Then, the available monolithic NPC was in situ reacted with the gaseous HN3 for 24 h and the monolithic NPC was transformed into monolithic copper azide. Additionally, the copper particles prepared by electrodeposition were also reacted with the gaseous HN3 under uniform conditions as a comparison. The fabricated monolithic copper azide was characterized by Fourier transform infrared (FTIR), inductively coupled plasma-optical emission spectrometry (ICP-OES), and differential scanning calorimetry (DSC).

  19. Alignments in the nobelium isotopes

    Institute of Scientific and Technical Information of China (English)

    ZHENG Shi-Zie; XU Fu-Rong; YUAN Cen-Xi; QI Chong

    2009-01-01

    Total-Routhian-Surface calculations have been performed to investigate the deformation and align-ment properties of the No isotopes. It is found that normal deformed and superdeformed states in these nuclei can coexist at low excitation energies. In neutron-deficient No isotopes, the superdeformed shapes can even become the ground states. Moreover, we plotted the kinematic moments of inertia of the No isotopes, which follow very nicely available experimental data. It is noted that, as the rotational frequency increases, align-ments develop at hω=0.2-0.3 MeV. Our calculations show that the occupation of the vj orbital plays an important role in the alignments of the No isotopes.

  20. Isotope-based quantum information

    CERN Document Server

    G Plekhanov, Vladimir

    2012-01-01

    The present book provides to the main ideas and techniques of the rapid progressing field of quantum information and quantum computation using isotope - mixed materials. It starts with an introduction to the isotope physics and then describes of the isotope - based quantum information and quantum computation. The ability to manipulate and control electron and/or nucleus spin in semiconductor devices provides a new route to expand the capabilities of inorganic semiconductor-based electronics and to design innovative devices with potential application in quantum computing. One of the major challenges towards these objectives is to develop semiconductor-based systems and architectures in which the spatial distribution of spins and their properties can be controlled. For instance, to eliminate electron spin decoherence resulting from hyperfine interaction due to nuclear spin background, isotopically controlled devices are needed (i.e., nuclear spin-depleted). In other emerging concepts, the control of the spatial...

  1. Isotopic Changes During Digestion: Protein

    Science.gov (United States)

    Tuross, N.

    2013-12-01

    Nutrient and hydrological inputs traverse a complicated route of pH, enzymatic and cellular processes in digestion in higher animals. The end products of digestion are the starting products for biosynthesis that are often used to interpret past life-ways. Using an artificial gut system, the isotopic changes (dD, d18O, d13C and d15N) of protein are documented. Three separate protein sources are subjected to the conditions, chemical and enzymatic, found in the stomach and upper small intestine with only a small shift in the oxygen isotopic composition of the proteins observed. Middle to lower small intestine parameters produced both greater isotopic effects and significantly lower molecular weight products. The role of the gastric enterocyte and the likely involvement of the internal milieu of this cell in the isotopic composition of amino acids that are transported to the liver are reported.

  2. SRB Sells Copper for Market Stability

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>In order to ease the tight supply situation for copper on the domestic market and meet the consumption requirement of the industry, the State Goods and Materials Adjustment Center under the State Reserves Bureau (SRB) is ready to sell 20,000 tons of copper by way of open bid. In addition, the SRB also prepares to sell 40,000 tons of copper later in December and

  3. Copper metabolism in analbuminaemic rats fed a high-copper diet.

    NARCIS (Netherlands)

    Yu, S.; Berg, van den G.J.; Beynen, A.C.

    1995-01-01

    Copper metabolism in male Nagase analbuminaemic (NA) rats was compared with that in male Sprague Dawley (SD) rats fed purified diets containing either 5 or 100 mg Cu/kg diet. Dietary copper loading increased hepatic and kidney copper concentrations in both strains to the same extent, but baseline va

  4. Pc Electrolytic System Of Zhangjiagang Copper Industry Company Successfully Produced Copper After Resuming Production

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    On March 17,the PC electrolytic system of Zhangjiagang Copper Industry Co.,Ltd successfully produced the first batch of qualified PC electrolytic copper after resuming production.This company’s 100,000 t/a PC electrolytic copper project was completed and launched into production in April last year.

  5. Nearly 60% Copper Rod & Wire Companies Neutral about Future Copper Price

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>How about the trend of copper price recently? According to the survey result of Shanghai Metals Market, amongst 21 domestic copper rod & wire companies, 57% of the companies are neutral about the future copper price, while 14% and 19% of the companies consider that

  6. Jiangxi Copper Planning to Produce Copper Products of More Than 480,000 Tons This Year

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>It is learned from Jiangxi Copper Group that the company has made the plan to produce copper processing products of more than 480,000 tons, and meanwhile its 100,000-ton copper plate and strip project is planned to be

  7. Wood textures in Jinman copper deposit in western Yunnan and their genetic implications

    Institute of Scientific and Technical Information of China (English)

    刘家军; 李朝阳; 张乾; 潘家永; 刘玉平; 刘显凡; 刘世荣; 杨伟光

    2001-01-01

    Jinman vein copper deposit in western Yunnan occurs in a salt-bearing red clastic rock formation composed of sandstone, siltstone and shale. Wood texture is considerably developed in the ores. The metallic minerals making up the wood textures mainly include pyrite, chalcopyrite and bornite. Studies on the samples and examination of their micrographs and electron micrographs have confirmed that they belong to xenoxylon, reflecting that the ore-hosting rock series is the product of sedimentation in the terrestrial environment. Organic geochemistry and sulfur and carbon isotopic composition data indicate that the formation of the deposit is substantially related with underground hot brines and biological processes.

  8. Tongling’s Ambition for Copper Processing Industrial Leadership

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>Known as the "Copper Capital of Ancient China", Tongling’s copper industry posted sub-stantial growth as the domestic copper price rose. According to Wang Yijun, the Director of Tongling DPC, the local government was

  9. TonglingExtended Copper Intensive Processing Industrial Chain

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>Despite the adverse impacts including decline in copper price, in 2012, Tongling’s copper in-dustry development still made steady progress. The number of copper enterprises in Tongling with industrial output value above 100 million

  10. [Copper in methane oxidation: a review].

    Science.gov (United States)

    Su, Yao; Kong, Jiao-Yan; Zhang, Xuan; Xia, Fang-Fang; He, Ruo

    2014-04-01

    Methane bio-oxidation plays an important role in the global methane balance and warming mitigation, while copper has a crucial function in methane bio-oxidation. On one side, copper is known to be a key factor in regulating the expression of the genes encoding the two forms of methane monooxygenases (MMOs) and is the essential metal element of the particulate methane monooxygenase (pMMO). On the other side, the content and fractionation of copper in the environment have great effects on the distribution of methanotrophs and their metabolic capability of methane and non-methane organic compounds, as well as on the copper-specific uptake systems in methanotrophs. Thus, it is meaningful to know the role of copper in methane bio-oxidation for comprehensive understanding of this process and is valuable for guiding the application of methanotrophs in greenhouse gas removal and pollution remediation. In this paper, the roles of copper in methane oxidation were reviewed, including the effect of copper on methanotrophic community structure and activity, the expression and activity of MMOs as well as the copper uptake systems in methanotrophs. The future studies of copper and methane oxidation were also discussed.

  11. Level of copper in human split ejaculate.

    Science.gov (United States)

    Skandhan, Kalanghot; Valsa, James; Sumangala, Balakrishnan; Jaya, Vasudevan

    2017-02-03

    The purpose of this study was to understand the details of splits of an ejaculate and to locate the origin of release of copper into semen. Laboratory methods routinely followed for semen analysis were carried out. Copper was estimated by employing atomic absorption spectrophotometry. First split of ejaculate showed the highest number of motile sperm, the quality of which decreased from first to third. Copper level in splits 1, 2 and 3 was 29, 23 and 22 µg%, respectively. This study concluded that copper was released from throughout the genital tract.

  12. Structure of a copper-isoniazid complex.

    Science.gov (United States)

    Hanson, J C; Camerman, N; Camerman, A

    1981-11-01

    It is well-known that complex formation with copper ions increases the in vitro mycobactericidal action of the antituberculosis agent isoniazid. We report here the preparation and structure of a copper(II)-isoniazid complex. Unit cell parameters are a = 9.575, b = 14.855, and c = 7.056 A and space group P2(1)2(1)2(1). Copper bonding geometry is square planar with the isoniazid carbonyl oxygen and hydrazide amino nitrogen atoms and two chlorines occupying coordination positions. Complexing with copper(II) does not significantly alter the isoniazid molecular conformation.

  13. Non-linear dynamics of stable carbon and hydrogen isotope signatures based on a biological kinetic model of aerobic enzymatic methane oxidation.

    Science.gov (United States)

    Vavilin, Vasily A; Rytov, Sergey V; Shim, Natalia; Vogt, Carsten

    2016-06-01

    The non-linear dynamics of stable carbon and hydrogen isotope signatures during methane oxidation by the methanotrophic bacteria Methylosinus sporium strain 5 (NCIMB 11126) and Methylocaldum gracile strain 14 L (NCIMB 11912) under copper-rich (8.9 µM Cu(2+)), copper-limited (0.3 µM Cu(2+)) or copper-regular (1.1 µM Cu(2+)) conditions has been described mathematically. The model was calibrated by experimental data of methane quantities and carbon and hydrogen isotope signatures of methane measured previously in laboratory microcosms reported by Feisthauer et al. [ 1 ] M. gracile initially oxidizes methane by a particulate methane monooxygenase and assimilates formaldehyde via the ribulose monophosphate pathway, whereas M. sporium expresses a soluble methane monooxygenase under copper-limited conditions and uses the serine pathway for carbon assimilation. The model shows that during methane solubilization dominant carbon and hydrogen isotope fractionation occurs. An increase of biomass due to growth of methanotrophs causes an increase of particulate or soluble monooxygenase that, in turn, decreases soluble methane concentration intensifying methane solubilization. The specific maximum rate of methane oxidation υm was proved to be equal to 4.0 and 1.3 mM mM(-1) h(-1) for M. sporium under copper-rich and copper-limited conditions, respectively, and 0.5 mM mM(-1) h(-1) for M. gracile. The model shows that methane oxidation cannot be described by traditional first-order kinetics. The kinetic isotope fractionation ceases when methane concentrations decrease close to the threshold value. Applicability of the non-linear model was confirmed by dynamics of carbon isotope signature for carbon dioxide that was depleted and later enriched in (13)C. Contrasting to the common Rayleigh linear graph, the dynamic curves allow identifying inappropriate isotope data due to inaccurate substrate concentration analyses. The non-linear model pretty adequately described experimental

  14. Copper Nanoparticles in Click Chemistry.

    Science.gov (United States)

    Alonso, Francisco; Moglie, Yanina; Radivoy, Gabriel

    2015-09-15

    The challenges of the 21st century demand scientific and technological achievements that must be developed under sustainable and environmentally benign practices. In this vein, click chemistry and green chemistry walk hand in hand on a pathway of rigorous principles that help to safeguard the health of our planet against negligent and uncontrolled production. Copper-catalyzed azide-alkyne cycloaddition (CuAAC), the paradigm of a click reaction, is one of the most reliable and widespread synthetic transformations in organic chemistry, with multidisciplinary applications. Nanocatalysis is a green chemistry tool that can increase the inherent effectiveness of CuAAC because of the enhanced catalytic activity of nanostructured metals and their plausible reutilization capability as heterogeneous catalysts. This Account describes our contribution to click chemistry using unsupported and supported copper nanoparticles (CuNPs) as catalysts prepared by chemical reduction. Cu(0)NPs (3.0 ± 1.5 nm) in tetrahydrofuran were found to catalyze the reaction of terminal alkynes and organic azides in the presence of triethylamine at rates comparable to those achieved under microwave heating (10-30 min in most cases). Unfortunately, the CuNPs underwent dissolution under the reaction conditions and consequently could not be recovered. Compelling experimental evidence on the in situ generation of highly reactive copper(I) chloride and the participation of copper(I) acetylides was provided. The supported CuNPs were found to be more robust and efficient catalyst than the unsupported counterpart in the following terms: (a) the multicomponent variant of CuAAC could be applied; (b) the metal loading could be substantially decreased; (c) reactions could be conducted in neat water; and (d) the catalyst could be recovered easily and reutilized. In particular, the catalyst composed of oxidized CuNPs (Cu2O/CuO, 6.0 ± 2.0 nm) supported on carbon (CuNPs/C) was shown to be highly versatile and very

  15. A DU bed system for storing and supplying hydrogen isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Koo, Daeseo; Park, Jongchul; Ahn, Do-Hee; Chung, Hongsuk [KAERI, Daejeon (Korea, Republic of); Yun, Sei-Hun [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    Depleted uranium (DU) has been extensively proposed for the storage, supply, and recovery of hydrogen isotopes. SDS is used for storing hydrogen isotopes as a metal hydride form. To control the SDS, it is necessary to monitor the tritium amount in a bed. In this study, a full-sized DU bed was designed and fabricated including cylindrical-type copper foam of nine layers to study the characteristics of hydriding/dehydriding and simulate the tritium amount in a bed. The integrity and leak inspection on the welding of a primary vessel was performed using a penetration test, helium leak test, and pressure test. Auto tuning on the cable heaters of two pairs in the DU bed was also be performed. In our next study, the hydriding/dehydriding on a DU bed will be performed. A simulation on the depleted uranium hydriding will be carried out. A DU bed was designed and fabricated including cylindrical-type copper foam of nine layers to study the characteristics of hydriding/dehydriding and simulate the tritium amount in a bed. Through a penetration test, it was confirmed that the welding of the primary vessel has a good integrity. It was confirmed that the two helium tubes is sound by inspecting a helium leak test on the welding of the primary vessel. It was also confirmed that the primary vessel has a good integrity by inspecting a helium leak and conducting a pressure test on it. Vacuuming of the DU bed system was carried out. Vacuuming of the in-bed calorimetric equipment was also carried out.

  16. Tracing contamination sources in soils with Cu and Zn isotopic ratios

    Energy Technology Data Exchange (ETDEWEB)

    Fekiacova, Z.; Cornu, S. [INRA, UR 1119 Géochimie des Sols et des Eaux, F-13100 Aix en Provence (France); Pichat, S. [Laboratoire de Géologie de Lyon (LGL-TPE), Ecole Normale Supérieure de Lyon, CNRS, UMR 5276, 69007 Lyon (France)

    2015-06-01

    Copper (Cu) and zinc (Zn) are naturally present and ubiquitous in soils and are important micronutrients. Human activities contribute to the input of these metals to soils in different chemical forms, which can sometimes reach a toxic level for soil organisms and plants. Isotopic signatures could be used to trace sources of anthropogenic Cu and Zn pollution. The aim of this paper is to determine whether it is possible to identify (i) Cu and Zn contamination in soils and their sources, on the basis of their isotopic signatures, and (ii) situations that are a priori favorable or not for tracing Cu and Zn pollution using the isotopic approach. Therefore, we compiled data from the literature on Cu and Zn isotopes in soils, rocks and pollutants and added to this database the results of our own research. As only a few studies have dealt with agricultural contamination, we also studied a soil toposequence from Brittany, France, that experienced spreading of pig slurry for tens of years. In the surface horizons of the natural soils, the δ{sup 65}Cu values vary from − 0.15 to 0.44‰ and the δ{sup 66}Zn from − 0.03 to 0.43‰. Furthermore, vertical variations along soil profiles range from − 0.95 to 0.44‰ for δ{sup 65}Cu and from − 0.53 to 0.64‰ for δ{sup 66}Zn values. We concluded that pedogenetic processes can produce isotopic fractionation, yet, it is not always discernible and can be overprinted by an exogenous isotopic signature. Furthermore, some contaminants are enriched in heavy Cu or in light Zn compared to the rock or soil, but no generalization can be made. The anthropogenic inputs can be identified based on stable Cu and Zn isotope ratios if the isotope ratios of the sources are different from those of the soil, which needs to be tested for each individual case. - Highlights: • Pedogenetic processes produce some Cu and Zn isotope fractionation. • Pollution with distinct isotopic signatures can be traced using Cu and Zn isotopes. • Tracing

  17. Paleoproxies: Heavy Stable Isotope Perspectives

    Science.gov (United States)

    Nagler, T. F.; Hippler, D.; Siebert, C.; Kramers, J. D.

    2002-12-01

    Recent advances in isotope ratio mass spectrometry, namely multiple collector ICP-MS and refined TIMS techniques, will significantly enhance the ability to measure heavy stable isotope fractionation, which will lead to the development of a wide array of process-identifying (bio)-geochemical tools. Thus far research in this area is not easily assessable to scientists outside the isotope field. This is due to the fact that analyzing heavy stable isotopes does not provide routine numbers which are per se true (the preciser the truer) but is still a highly experimental field. On the other hand resolving earth science problems requires specialists familiar with the environment being studied. So what is in there for paleoceanographers? In a first order approach, relating isotope variations to physical processes is straightforward. A prominent example are oxygen isotope variations with temperature. The total geological signal is of course far more complicated. At low temperatures, heavy stable isotopes variations have been reported for e.g. Ca, Cr, Fe, Cu, Zn, Mo and Tl. Fractionation mechanisms and physical parameters responsible for the observed variations are not yet resolved for most elements. Significant equilibrium isotope fractionation is expected from redox reactions of transition metals. However a difference in coordination number between two coexisting speciations of an element in the same oxidation state can also cause fractionation. Protonation of dissolved Mo is one case currently discussed. For paleoceanography studies, a principal distinction between transition metals essential for life (V to Zn plus Mo) or not will be helpful. In case of the former group, distinction between biogenic and abiogenic isotope fractionation will remain an important issue. For example, abiotic Fe redox reactions result in isotope fractionations indistinguishable in direction and magnitude from microbial effects. Only a combination of different stable isotope systems bears the

  18. Conclusion on the peer review of the pesticide risk assessment of confirmatory data submitted for the active substance Copper (I, copper (II variants namely copper hydroxide, copper oxychloride, tribasic copper sulfate, copper (I oxide, Bordeaux mixture

    Directory of Open Access Journals (Sweden)

    European Food Safety Authority

    2013-06-01

    Full Text Available The conclusions of the European Food Safety Authority (EFSA following the peer review of the initial risk assessment carried out by the competent authority of the rapporteur Member State France, for the pesticide active substance copper (I, copper (II variants (formerly referred to as copper compounds are reported. The context of the peer review was that requested by the European Commission following the submission and evaluation of confirmatory environmental fate and behaviour and ecotoxicology data. The conclusions were reached on the basis of the evaluation of the representative uses of copper (I, copper (II variants as a fungicide/bactericide on grapes and tomatoes. The reliable endpoints concluded as being appropriate for use in regulatory risk assessment, derived from the available studies and literature in the dossier peer reviewed, are presented. Concerns are identified.

  19. Cu isotope geochemistry of volcanogenic massive sulphide deposits of the eastern Pontides, Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Housh, T B [Department of Geological Sciences, University of Texas at Austin, 1 University Station C1100, Austin, TX 78712 (United States); Ciftci, E [Department of Geological Engineering, Nigde University, 51245 Nigde (Turkey)], E-mail: housh@mail.utexas.edu

    2008-07-01

    A large number of volcanogenic massive sulfide (VMS) deposits are associated with Late Cretaceous to Eocene arc-like volcanic rocks in the eastern Pontides of NE Turkey. Cu isotope studies on thirteen VMS and two vein deposits were undertaken to examine the nature of copper isotope variations and to compare these with other VMS and black smoker deposits. {phi}{sup 65}Cu of chalcopyrite from these deposits range between +0.34 and -0.62 per mille . Chalcopyrite from the VMS deposits of the eastern Pontides have a mean {phi}{sup 65}Cu = -0.13 per mille . {phi}{sup 65}Cu of chalcopyrite is generally heavier than that of corresponding bornite. The range of {phi}{sup 65}Cu for chalcopyrite from VMS deposits in the eastern Pontides is larger than that observed from Alexandrinka, a Devonian VMS deposit in the southern Urals, but is significantly smaller than the up to 3 per mille variations observed from individual modern sea-floor hydrothermal fields along modern mid-ocean ridges. The range of Cu isotope variation in VMS deposits from the eastern Pontides is interpreted to result from processes related to both oxidation and leaching of previously deposited copper by seawater and to its subsequent deposition elsewhere in the hydrothermal system.

  20. Copper and conquer: copper complexes of di-2-pyridylketone thiosemicarbazones as novel anti-cancer therapeutics.

    Science.gov (United States)

    Park, Kyung Chan; Fouani, Leyla; Jansson, Patric J; Wooi, Danson; Sahni, Sumit; Lane, Darius J R; Palanimuthu, Duraippandi; Lok, Hiu Chuen; Kovačević, Zaklina; Huang, Michael L H; Kalinowski, Danuta S; Richardson, Des R

    2016-09-01

    Copper is an essential trace metal required by organisms to perform a number of important biological processes. Copper readily cycles between its reduced Cu(i) and oxidised Cu(ii) states, which makes it redox active in biological systems. This redox-cycling propensity is vital for copper to act as a catalytic co-factor in enzymes. While copper is essential for normal physiology, enhanced copper levels in tumours leads to cancer progression. In particular, the stimulatory effect of copper on angiogenesis has been established in the last several decades. Additionally, it has been demonstrated that copper affects tumour growth and promotes metastasis. Based on the effects of copper on cancer progression, chelators that bind copper have been developed as anti-cancer agents. In fact, a novel class of thiosemicarbazone compounds, namely the di-2-pyridylketone thiosemicarbazones that bind copper, have shown great promise in terms of their anti-cancer activity. These agents have a unique mechanism of action, in which they form redox-active complexes with copper in the lysosomes of cancer cells. Furthermore, these agents are able to overcome P-glycoprotein (P-gp) mediated multi-drug resistance (MDR) and act as potent anti-oncogenic agents through their ability to up-regulate the metastasis suppressor protein, N-myc downstream regulated gene-1 (NDRG1). This review provides an overview of the metabolism and regulation of copper in normal physiology, followed by a discussion of the dysregulation of copper homeostasis in cancer and the effects of copper on cancer progression. Finally, recent advances in our understanding of the mechanisms of action of anti-cancer agents targeting copper are discussed.

  1. Unusual isotope effects on the pseudogap in high-Tc cuprate superconductors as support for the BCS-like pairing theory of large polarons above Tc

    Science.gov (United States)

    Dzhumanov, S.; Baimatov, P. J.; Djumanov, Sh. S.

    2015-06-01

    The BCS-like pairing theory is extended to the intermediate coupling regime and to the cases of exotic cuprate superconductors with large and small Fermi surfaces, so as to describe the pairing correlations above Tc , the opening of a pseudogap (PG) at a mean-field temperature T∗ >Tc and the unusual isotope effects on the PG in these materials within the large polaron model and two different BCS-like approaches. We argue that unconventional electron-phonon interactions are responsible for the polaron formation and the separation between temperatures T∗ (the onset of precursor Cooper pairing) and Tc (the onset of the superconducting transition) in exotic cuprate superconductors. Using the extended BCS-like approaches, we calculate the PG formation temperature T∗ , isotope shifts ΔT∗ , oxygen and copper isotope exponents and show that isotope effects on the PG basically depend on strengths of Coulomb and electron-phonon interactions, doping levels and dielectric constants of the cuprates. The new BCS-like pairing theory of polaronic carriers predicts the existence of small and sizable positive oxygen isotope effect and very large negative oxygen and copper isotope effects on the PG in the cuprates with large Fermi surfaces. The calculated results for T∗ , isotope shifts and exponents are compared with experimental data on various cuprate superconductors. For all the considered cases, a good quantitative agreement was found between theory and experimental data. We also predict the existence of small and sizable negative isotope effects on T∗ in deeply underdoped cuprates with small Fermi surfaces. Further, we find that the isotope effects on T∗ (=Tc) in heavily overdoped cuprates just like in some metals are relatively small positive or become even negative.

  2. Energy and materials flows in the copper industry

    Energy Technology Data Exchange (ETDEWEB)

    Gaines, L.L.

    1980-12-01

    The copper industry comprises both the primary copper industry, which produces 99.9%-pure copper from copper ore, and the secondary copper industry, which salvages and recycles copper-containing scrap metal to extract pure copper or copper alloys. The United States uses about 2 million tons of copper annually, 60% of it for electrical applications. Demand is expected to increase less than 4% annually for the next 20 years. The primary copper industry is concentrated in the Southwest; Arizona produced 66% of the 1979 total ore output. Primary production uses about 170 x 10/sup 12/ Btu total energy annually (about 100 x 10/sup 6/ Btu/ton pure copper produced from ore). Mining and milling use about 60% of the total consumption, because low-grade ore (0.6% copper) is now being mined. Most copper is extracted by smelting sulfide ores, with concomitant production of sulfur dioxide. Clean air regulations will require smelters to reduce sulfur emissions, necessitating smelting process modifications that could also save 20 x 10/sup 12/ Btu (10 x 10/sup 6/ Btu/ton of copper) in smelting energy. Energy use in secondary copper production averages 20 x 10/sup 6/ Btu/ton of copper. If all copper products were recycled, instead of the 30% now salvaged, the energy conservation potential would be about one-half the total energy consumption of the primary copper industry.

  3. Duobaoshan Porphyry Copper Deposit and Its Associated Components

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    @@Duobaoshan porphyry copper deposit, situated in Nenjiang County of Heilongjiang Province, Northeast China, lies tectonically in the Mongolian-Okhotsk geosyncline.Duobaoshan porphyry copper ore field consisting of Duobaoshan copper deposit and Tongshan copper deposit contains rich copper associated with molybdenum, gold, silver and osmium (OsX87). In this sense, this porphyry copper ore field will turn into a large industrial base of copper, gold, silver and osmium. At present, in Duobaoshan porphyry copper deposit occurs a usable B+C+-D grade reserve of 3 276 630ton Cu, 122 920 ton Mo, 87 ton gold and 1 417 ton Ag.

  4. Energy and materials flows in the copper industry

    Energy Technology Data Exchange (ETDEWEB)

    Gaines, L.L.

    1980-12-01

    The copper industry comprises both the primary copper industry, which produces 99.9%-pure copper from copper ore, and the secondary copper industry, which salvages and recycles copper-containing scrap metal to extract pure copper or copper alloys. The United States uses about 2 million tons of copper annually, 60% of it for electrical applications. Demand is expected to increase less than 4% annually for the next 20 years. The primary copper industry is concentrated in the Southwest; Arizona produced 66% of the 1979 total ore output. Primary production uses about 170 x 10/sup 12/ Btu total energy annually (about 100 x 10/sup 6/ Btu/ton pure copper produced from ore). Mining and milling use about 60% of the total consumption, because low-grade ore (0.6% copper) is now being mined. Most copper is extracted by smelting sulfide ores, with concomitant production of sulfur dioxide. Clean air regulations will require smelters to reduce sulfur emissions, necessitating smelting process modifications that could also save 20 x 10/sup 12/ Btu (10 x 10/sup 6/ Btu/ton of copper) in smelting energy. Energy use in secondary copper production averages 20 x 10/sup 6/ Btu/ton of copper. If all copper products were recycled, instead of the 30% now salvaged, the energy conservation potential would be about one-half the total energy consumption of the primary copper industry.

  5. Cu-Zn-Pb multi isotopic characterization of a small watershed (Loire river basin, France)

    Science.gov (United States)

    Desaulty, A. M.; Millot, R.; Perret, S.; Bourrain, X.

    2015-12-01

    Combating metal pollution in surface water is a major environmental, public health and economic issue. Knowledge of the behavior of metals, such as copper (Cu), zinc (Zn) and lead (Pb) in sediments and dissolved load, is a key factor to improve the management of rivers. Recent advances in mass spectrometry related to the development of MC-ICPMS allow to analyze the isotopic composition of these elements, and previous studies show the effectiveness of isotopic analyses to determine the anthropogenic sources of pollution in environment. The goal of this study is to use the Cu-Zn-Pb multi-isotopic signature to track the pollutions in surface water, and to understand the complex processes causing the metals mobilization and transport in environment. More particularly we investigate the mechanisms of distribution between the dissolved load and particulate load, known to play an important role in the transport of metals through river systems. As case study, we chose a small watershed, poorly urbanized in the Loire river basin. Its spring is in a pristine area, while it is only impacted some kilometers further by the releases rich in metals coming from a hospital water treatment plant. First a sampling of these liquid effluents as well as dissolved load and sediment from upstream to downstream was realized and their concentrations and isotopic data were determined. Then to simulate a lot of potential natural and anthropogenic modifications of environmental conditions, we made sequential extraction protocol using various reagents on the sediments. Isotopic analyzes were performed also on the various extracting solutions. Isotopic ratios were measured using a Neptune MC-ICPMS at the BRGM, after a protocol of purification for Zn and Cu. The results showed that, these isotopic systematics reveal important informations about the mechanists of mobilization and transport of metals through river systems. However experiments performed under laboratory conditions will be necessary

  6. Strontium Isotope Study of Coal Untilization By-products Interacting with Environmental Waters

    Energy Technology Data Exchange (ETDEWEB)

    Spivak-Birndorf, Lev J; Stewart, Brian W; Capo, Rosemary C; Chapman, Elizabeth C; Schroeder, Karl T; Brubaker, Tonya M

    2011-09-01

    Sequential leaching experiments on coal utilization by-products (CUB) were coupled with chemical and strontium (Sr) isotopic analyses to better understand the influence of coal type and combustion processes on CUB properties and the release of elements during interaction with environmental waters during disposal. Class C fly ash tended to release the highest quantity of minor and trace elements—including alkaline earth elements, sodium, chromium, copper, manganese, lead, titanium, and zinc—during sequential extraction, with bottom ash yielding the lowest. Strontium isotope ratios ({sup 87}Sr/{sup 86}Sr) in bulk-CUB samples (total dissolution of CUB) are generally higher in class F ash than in class C ash. Bulk-CUB ratios appear to be controlled by the geologic source of the mineral matter in the feed coal, and by Sr added during desulfurization treatments. Leachates of the CUB generally have Sr isotope ratios that are different than the bulk value, demonstrating that Sr was not isotopically homogenized during combustion. Variations in the Sr isotopic composition of CUB leachates were correlated with mobility of several major and trace elements; the data suggest that arsenic and lead are held in phases that contain the more radiogenic (high-{sup 87}Sr/{sup 86}Sr) component. A changing Sr isotope ratio of CUB-interacting waters in a disposal environment could forecast the release of certain strongly bound elements of environmental concern. This study lays the groundwork for the application of Sr isotopes as an environmental tracer for CUB–water interaction.

  7. Annual Copper Mountain Conferences on Multigrid and Iterative Methods, Copper Mountain, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, Stephen F. [Front Range Scientific, Inc., Lake City, CO (United States)

    2016-03-25

    This project supported the Copper Mountain Conference on Multigrid and Iterative Methods, held from 2007 to 2015, at Copper Mountain, Colorado. The subject of the Copper Mountain Conference Series alternated between Multigrid Methods in odd-numbered years and Iterative Methods in even-numbered years. Begun in 1983, the Series represents an important forum for the exchange of ideas in these two closely related fields. This report describes the Copper Mountain Conference on Multigrid and Iterative Methods, 2007-2015. Information on the conference series is available at http://grandmaster.colorado.edu/~copper/.

  8. Synthesis of copper nanoparticles by electrolysis of DNA utilizing copper as sacrificial anode.

    Science.gov (United States)

    Singh, Dinesh Pratap; Srivastava, Onkar Nath

    2007-06-01

    Copper nanoparticles have been synthesized by anodic oxidation through a simple electrolysis process employing de-oxy ribonucleic acid (DNA) as electrolyte. Platinum was taken as cathode and copper as anode. The applied voltage was 4 V and the electrolysis was performed for duration of 1 h. The copper nanoparticles were prepared in situ from the electron beam irradiation on residues of electrolyte consisting of DNA and copper particles: DNA (Cu) complexes. The size of the nanoparticles ranges between 5-50 nm. A tentative explanation has been given for the formation of copper nanoparticles.

  9. Different pathways for copper sulphate and copper nitrate antioxidation and organic acid excretion in Typha latifolia?

    OpenAIRE

    Lyubenova L.; Kuhn A.; Höltkemeier A.; Bipuah H.; Belford E.; Schröder P.

    2013-01-01

    The major topic of the present experiment was the investigation of the antioxidative enzymes and the root exudate excretion after plant exposure to copper. The copper was added for each treatment as copper sulphate and copper nitrate in the concentrations of 10 μM, 50 μM and 100 μM, respectively. The plant species chosen for the study was Typha latifolia. The experiment gives insight into the plant responses to different copper supplies during the same conditions of exposure. Remarkable resul...

  10. Calcium Isotope Analysis by Mass Spectrometry

    Science.gov (United States)

    Boulyga, S.; Richter, S.

    2010-12-01

    The variations in the isotopic composition of calcium caused by fractionation in heterogeneous systems and by nuclear reactions can provide insight into numerous biological, geological, and cosmic processes, and therefore isotopic analysis finds a wide spectrum of applications in cosmo- and geochemistry, paleoclimatic, nutritional, and biomedical studies. The measurement of calcium isotopic abundances in natural samples has challenged the analysts for more than three decades. Practically all Ca isotopes suffer from significant isobaric interferences, whereas low-abundant isotopes can be particularly affected by neighboring major isotopes. The extent of natural variations of stable isotopes appears to be relatively limited, and highly precise techniques are required to resolve isotopic effects. Isotope fractionation during sample preparation and measurements and instrumental mass bias can significantly exceed small isotope abundance variations in samples, which have to be investigated. Not surprisingly, a TIMS procedure developed by Russell et al. (Russell et al., 1978. Geochim Cosmochim Acta 42: 1075-1090) for Ca isotope measurements was considered as revolutionary for isotopic measurements in general, and that approach is used nowadays (with small modifications) for practically all isotopic systems and with different mass spectrometric techniques. Nevertheless, despite several decades of calcium research and corresponding development of mass spectrometers, the available precision and accuracy is still not always sufficient to achieve the challenging goals. This presentation discusses figures of merits of presently used analytical methods and instrumentation, and attempts to critically assess their limitations. Additionally, the availability of Ca isotope reference materials will be discussed.

  11. Geomorphology of the lower Copper River, Alaska

    Science.gov (United States)

    Brabets, Timothy P.

    1997-01-01

    The Copper River, located in southcentral Alaska, drains an area of more than 24,000 square miles. About 30 miles above its mouth, this large river enters Miles Lake, a proglacial lake formed by the retreat of Miles Glacier. Downstream from the outlet of Miles Lake, the Copper River flows past the face of Childs Glacier before it enters a large, broad, alluvial flood plain. The Copper River Highway traverses this flood plain and in 1995, 11 bridges were located along this section of the highway. These bridges cross parts of the Copper River and in recent years, some of these bridges have sustained serious damage due to the changing course of the Copper River. Although the annual mean discharge of the lower Copper River is 57,400 cubic feet per second, most of the flow occurs during the summer months from snowmelt, rainfall, and glacial melt. Approximately every six years, an outburst flood from Van Cleve Lake, a glacier-dammed lake formed by Miles Glacier, releases approximately 1 million acre-feet of water into the Copper River. When the outflow rate from Van Cleve Lake reaches it peak, the flow of the Copper River will increase between 150,000 to 190,000 cubic feet per second. Data collected by bedload sampling and continuous seismic reflection indicated that Miles Lake traps virtually all the bedload being transported by the Copper River as it enters the lake from the north. The reservoir-like effect of Miles Lake results in the armoring of the channel of the Copper River downstream from Miles Lake, past Childs Glacier, until it reaches the alluvial flood plain. At this point, bedload transport begins again. The lower Copper River transports 69 million tons per year of suspended sediment, approximately the same quantity as the Yukon River, which drains an area of more than 300,000 square miles. By correlating concurrent flows from a long-term streamflow-gaging station on the Copper River with a short-term streamflow-gaging station at the outlet of Miles Lake

  12. Liver copper concentration in Wilson's disease: effect of treatment with 'anti-copper' agents.

    Science.gov (United States)

    Gibbs, K; Walshe, J M

    1990-01-01

    Serial copper determinations have been made on the livers of 10 patients with Wilson's disease. Two were studied before and eight after the start of treatment in order to assess the effect, if any, on the concentration of the metal. In two patients who were receiving no therapy and in one in whom it had been discontinued, the level of copper rose. In the latter patient, resumption of treatment then resulted in a fall in the level of copper in the liver. A similar fall was seen in seven patients on continuous therapy. In one patient, a very poor complier, there was a tendency for the liver copper concentration to rise over a 5-year period. All three therapies investigated--penicillamine, trientine and tetrathiomolybdate--when taken regularly, appear to be effective in reducing liver copper levels. Sixty-nine single determinations of liver copper have been plotted against time on treatment. This shows that the copper concentration falls rapidly in the first year. Thereafter, there is no linear relationship between the duration of treatment and liver copper. Poor compliers have a higher liver copper concentration than do good compliers. Determinations made from different portions of the liver showed that in only one of 19 examples was there an overlap between the near normal and the abnormal range. The principal mechanism of action of 'anti-copper' agents in Wilson's disease appears to be the mobilization of copper from the tissues, but a secondary detoxifying action may come into play later.

  13. COPPER AND COPPER-CONTAINING PESTICIDES: METABOLISM, TOXICITY AND OXIDATIVE STRESS

    Directory of Open Access Journals (Sweden)

    Viktor Husak

    2015-05-01

    Full Text Available The purpose of this paper is to provide a brief review of the current knowledge regarding metabolism and toxicity of copper and copper-based pesticides in living organisms. Copper is an essential trace element in all living organisms (bacteria, fungi, plants, and animals, because it participates in different metabolic processes and maintain functions of organisms. The transport and metabolism of copper in living organisms is currently the subject of many studies. Copper is absorbed, transported, distributed, stored, and excreted in the body via the complex of homeostatic processes, which provide organisms with a needed constant level of this micronutrient and avoid excessive amounts. Many aspects of copper homeostasis were studied at the molecular level. Copper based-pesticides, in particularly fungicides, bacteriocides and herbicides, are widely used in agricultural practice throughout the world. Copper is an integral part of antioxidant enzymes, particularly copper-zinc superoxide dismutase (Cu,Zn-SOD, and plays prominent roles in iron homeostasis. On the other hand, excess of copper in organism has deleterious effect, because it stimulates free radical production in the cell, induces lipid peroxidation, and disturbs the total antioxidant capacity of the body. The mechanisms of copper toxicity are discussed in this review also.

  14. Three stages of copper accumulation in hepatocellular lysosomes: X-ray microanalysis of copper-loaded golden hamsters.

    OpenAIRE

    Yagi, A.; Hayashi, H; Higuchi, T.; Hishida, N.; Sakamoto, N.

    1992-01-01

    Male golden hamsters were loaded with copper by supplying them for up to 12 weeks with drinking water containing 0.5% cupric acetate. The copper feeding increased hepatic copper to widely varying levels. Energy dispersive X-ray microanalysis could always identify a copper-sulphur complex in the hepatocyte lysosomes of copper-loaded hamsters and the X-ray intensity of copper was found to be a reliable parameter to measure in-situ copper accumulation. Combining this parameter with the copper bi...

  15. Theory of Copper Oxide Superconductors

    CERN Document Server

    Kamimura, Hiroshi; Shunichi Matsuno; Tsuyoshi Hamada

    2005-01-01

    This is an advanced textbook for graduate students and researchers wishing to learn about high temperature superconductivity in copper oxides, in particular the Kamimura-Suwa (K-S) model. Because a number of models have been proposed since the discovery of high temperature superconductivity by Bednorz and Müller in 1986, the book first explains briefly the historical development that led to the K-S model. It then focuses on the physical background necessary to understand the K-S model and on the basic principles behind various physical phenomena such as electronic structures, electrical, thermal and optical properties, and the mechanism of high temperature superconductivity.

  16. Copper Scrap Industry Remained in Cold Winter

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Beginning from 2012,domestic copper scrap enterprises entered"winter"period,this year the situation further worsened.According to survey,most medium to small sized copper scrap trading enterprises have either closed down,transferred to other businesses,or reduced trading volume,though large trading

  17. Smelting Oxidation Desulfurization of Copper Slags

    Institute of Scientific and Technical Information of China (English)

    LI Lei; HU Jian-hang; WANG Hua

    2012-01-01

    According to the mechanism of sulfur removal easily through oxidation, the process of smelting oxidation desulfurization of copper slags is studied, which supplies a new thinking for obtaining the molten iron of lower sulfur content by smelting reduction of copper slags. Special attention is given to the effects of the holding temperature, the holding time and CaF2, CaO addition amounts on the desulfurization rate of copper slags. The results indicate that the rate of copper slags smelting oxidation desulfurization depends on the matte mass transfer rate through the slag phase. After the oxidation treatment, sulfur of copper slags can be removed as SO2 efficiently. Amount of Ca2+ of copper slags affects the desulfurization rate greatly, and the slag desulfurization rate is reduced by adding a certain amount of CaF2 and CaO. Compared with CaF2, CaO is negative to slags sulfur removal with equal Ca2+ addition. Under the air flow of 0.3 U/min, the sulfur content of copper slags can be reduced to 0. 004 67% in the condition of the holding time of 3 min and the holding temperature of 1 500 ℃. The sulfur content of molten iron is reduced to 0. 000 8 % in the smelting reduction of treated slags, and the problem of high sulfur content of molten iron obtained by smelting reduction with copper slag has been successively solved.

  18. Copper and Aluminium Fabricators in Deep Waters

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The copper processing industry of Yingtan represents over 60% of the provincial fiscal revenue.Due to the fallout of the global finan- cial crisis,most of the 78 copper processing enterprises in Yingtan City have or are about to shut down.In late October,Yingtan city spe-

  19. Spent nuclear fuel rods encapsulated in copper

    Energy Technology Data Exchange (ETDEWEB)

    Hanes, H.D.

    1984-04-01

    Using hot isostatic pressing, spent nuclear fuel rods and other radioactive wastes can be encapsulated in solid copper. The copper capsule which is formed is free of pores and cracks, and is highly resistant to attack by reducing ground waters. Such capsules should contain radioactive materials safely for hundreds of thousands of years in underground storage.

  20. Mesophilic leaching of copper sulphide sludge

    Directory of Open Access Journals (Sweden)

    VLADIMIR B. CVETKOVSKI

    2009-02-01

    Full Text Available Copper was precipitated using a sodium sulphide solution as the precipitation agent from an acid solution containing 17 g/l copper and 350 g/l sulphuric acid. The particle size of nearly 1 µm in the sulphide sludge sample was detected by optical microscopy. Based on chemical and X-ray diffraction analyses, covellite was detected as the major sulphide mineral. The batch bioleach amenability test was performed at 32 °C on the Tk31 mine mesophilic mixed culture using a residence time of 28 days. The dissolution of copper sulphide by direct catalytic leaching of the sulphides with bacteria attached to the particles was found to be worthy, although a small quantity of ferrous ions had to be added to raise the activity of the bacteria and the redox potential of the culture medium. Throughout the 22-day period of the bioleach test, copper recovery based on residue analysis indicated a copper extraction of 95 %, with copper concentration in the bioleach solution of 15 g/l. The slope of the straight line tangential to the exponential part of the extraction curve gave a copper solubilisation rate of 1.1 g/l per day. This suggests that a copper extraction of 95 % for the period of bioleach test of 13.6 days may be attained in a three-stage bioreactor system.

  1. High Copper Amalgam Alloys in Dentistry

    Directory of Open Access Journals (Sweden)

    Gaurav Solanki

    2012-07-01

    Full Text Available Amalgam Restoration is an example of the material giving its name to the process. Amalgam fillings are made up of mercury, powdered silver and tin. They are mixed and packed into cavities in teeth where it hardens slowly and replaces the missing tooth substance. The high copper have become material of choice as compared to low copper alloys nowadays because of their improved mechanical properties, corrosion resistance, better marginal integrity and improved performance in clinical trial. The high copper amalgam was used as a restorative material. The application of high copper amalgam was found to be much more useful than low copper amalgam. High copper had much more strength, corrosion resistance, durability and resistance to tarnish as compared to low copper amalgams. No marked expansion or condensation was noted in the amalgam restoration after its setting after 24 hrs. By using the high copper alloy, the chances of creep were also minimized in the restored tooth. No discomfort or any kind of odd sensation in the tooth was noted after few days of amalgam restoration in the tooth.

  2. China Curbs the Investment in Copper Smelting

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    <正>According to a recent document released by the State Development and Reform Commission (SDRC), the investment in copper smelting by China’s enterprises will be put under strict control so as to prevent the blind investment and duplication in copper smelting projects at low technical standard. The document stipulated a series of conditions including equipment, technology, energy consumption and environmental protection.

  3. Jinchuan Becomes a Shareholder of Huading Copper

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>At the end of 2011, the signing ceremony was held for China Jinchuan Nonferrous Metals Holding Co., Ltd. to become a shareholder of Baotou Huading Copper Development Co., Ltd. As a leading company of the copper deep processing industry in the high-tech rare earth

  4. Cellular copper distribution: a mechanistic systems biology approach.

    Science.gov (United States)

    Banci, Lucia; Bertini, Ivano; Cantini, Francesca; Ciofi-Baffoni, Simone

    2010-08-01

    Copper is an essential but potentially harmful trace element required in many enzymatic processes involving redox chemistry. Cellular copper homeostasis in mammals is predominantly maintained by regulating copper transport through the copper import CTR proteins and the copper exporters ATP7A and ATP7B. Once copper is imported into the cell, several pathways involving a number of copper proteins are responsible for trafficking it specifically where it is required for cellular life, thus avoiding the release of harmful free copper ions. In this study we review recent progress made in understanding the molecular mechanisms of copper transport in cells by analyzing structural features of copper proteins, their mode of interaction, and their thermodynamic and kinetic parameters, thus contributing to systems biology of copper within the cell.

  5. Metallogenetic Mechanism and Timing of Late Superimposing Fluid Mineralization in the Dongguashan Diplogenetic Stratified Copper Deposit, Anhui Province

    Institute of Scientific and Technical Information of China (English)

    XU Zhaowen; LU Xiancai; LING Hongfei; LU Jianjun; JIANG Shoyong; NIE Guiping; HUANG Shunsheng; HUA Ming

    2005-01-01

    An important diplogenetic mineralization event superimposed on pre-existing exhalation sediments in the Tongling area, Anhui province, was triggered by widespread granitic magmatism along the northeastern margin of the Yangtze Block during 140-135 Ma under extensional tectonic circumstances following the collision between the North China and Yangtze blocks. The main orebodies of the Dongguashan copper deposit, a typical diplogenetic stratified deposit among many polymetallic ore deposits in China, are hosted by strata between Upper Devonian sandstone and Carboniferous limestone, and its mineralization was genetically related to the Qingshanjiao intrusive. The Rb-Sr isotopic isochron of the Qingshanjiao intrusive yields an age of about 136.5±1.4 Ma. The ore-forming fluid reflected by the inclusion fluid in quartz veins is characterized by high temperature and high salinity, and its age was also determined by Rb-Sr isotope dating as 134±11 Ma. Oxygen and hydrogen isotope composition data suggest that the ore-forming fluid was derived mainly from magmatism. By integrating these isotopic dating data, characteristics of fluid inclusions and the geology of the deposit, the mineralization of the Dongguashan copper deposit is divided into two stages. First, a stratiform sedimentary deposit or protore layer formed in the Late Devonian to the Early Carboniferous, while in the second stage the pre-existing protore was superimposed by hydrothermal fluid that was derived from the Yanshanian magmatic activities occurring around 135 Ma ago. This two-stage mineralization formed the Dongguashan statiform copper deposit.Associated "porphyry" mineralization found in the bottom of and in surrounding intrusive rocks of the orebodies might have occurred in the same period as a second-stage mineralization of this deposit.

  6. Copper binding ligands: production by marine plankton and characterization by ESI-MS

    Science.gov (United States)

    Orians, K.; Ross, A.; Lawrence, M.; Ikonomou, M.

    2003-04-01

    Organic complexation affects the bioavailability and distribution of copper in the surface ocean. The cyanobacterium Synechococcus sp. PCC 7002 was cultured in the lab and subjected to near-toxic Cu concentrations. Strong Cu-binding ligands were produced under these conditions, as found for other species of Synechococcus. The copper-binding ligand produced had a log K'cond. (log conditional stability constant) of 12.2, similar to the natural ligands found in the surface ocean. The amount of ligand produced was proportional to the amount of copper present. Isolation and concentration of these compounds for characterization by electrospray mass spectrometry (ESI-MS) provides information about the structure of the organic ligands and their metal-ion complexes. Using model ligands, we'll show that ligands can be characterized by ESI-MS and that the location of the copper binding site can be determined in complex molecules. We'll also present results of copper-complexing ligands extracted from the coastal waters of British Columbia. Ligand concentrations are higher at low salinity and in surface waters, indicating that these ligands are produced in surface waters and/or delivered to the region via the Fraser River. Analysis of the extracts with highest UV absorbance identified two Cu2+ ligands of molecular weight 259 and 264. The mass and isotopic distributions are consistent with dipeptides and tripeptides containing two metal-binding amino groups. This result is consistent with the findings of other studies attempting to characterize Cu2+ ligands in seawater. The structure of the identified ligand is similar to that of rhodotorulic acid (a microbial siderophore), glutathione, and phytochelatins, indicating that small peptides and related compounds can act as strong, specific metal chelators in natural waters

  7. Isotopes a very short introduction

    CERN Document Server

    Ellam, Rob

    2016-01-01

    An isotope is a variant form of a chemical element, containing a different number of neutrons in its nucleus. Most elements exist as several isotopes. Many are stable while others are radioactive, and some may only exist fleetingly before decaying into other elements. In this Very Short Introduction, Rob Ellam explains how isotopes have proved enormously important across all the sciences and in archaeology. Radioactive isotopes may be familiar from their use in nuclear weapons, nuclear power, and in medicine, as well as in carbon dating. They have been central to establishing the age of the Earth and the origins of the solar system. Combining previous and new research, Ellam provides an overview of the nature of stable and radioactive isotopes, and considers their wide range of modern applications. ABOUT THE SERIES: The Very Short Introductions series from Oxford University Press contains hundreds of titles in almost every subject area. These pocket-sized books are the perfect way to get ahead in a new subjec...

  8. Exotic Structure of Carbon Isotopes

    CERN Document Server

    Suzuki, T; Hagino, K; Suzuki, Toshio; Sagawa, Hiroyuki; Hagino, Kouichi

    2002-01-01

    We studied firstly the ground state properties of C-isotopes using a deformed Hartree-Fock (HF)+ BCS model with Skyrme interactions. Shallow deformation minima are found in several neutron$-$rich C-isotopes. It is shown also that the deformation minima appear in both the oblate and the prolate sides in $^{17}$C and $^{19}$C having almost the same binding energies. Secondly, we carried out shell model calculations to study electromagnetic moments and electric dipole transitions of the C-isotopes. We point out the clear configuration dependence of the quadrupole and magnetic moments in the odd C-isotopes, which will be useful to find out the deformations and the spin-parities of the ground states of these nuclei. We studied electric dipole states of C-isotopes focusing on the interplay between low energy Pigmy strength and giant dipole resonances. Reasonable agreement is obtained with available experimental data for the photoreaction cross sections both in the low energy region below $\\hbar \\omega $=14 MeV and ...

  9. Handbook of environmental isotope geochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Baskaran, Mark (ed.) [Wayne State Univ., Detroit, MI (United States). Dept. Geology

    2011-07-01

    Applications of radioactive and stable isotopes have revolutionized our understanding of the Earth and near-earth surface processes. The utility of the isotopes are ever-increasing and our sole focus is to bring out the applications of these isotopes as tracers and chronometers to a wider audience so that they can be used as powerful tools to solve environmental problems. New developments in this field remain mostly in peer-reviewed journal articles and hence our goal is to synthesize these findings for easy reference for students, faculty, regulators in governmental and non-governmental agencies, and environmental companies. While this volume maintains its rigor in terms of its depth of knowledge and quantitative information, it contains the breadth needed for wide variety problems and applications in the environmental sciences. This volume presents all of the newer and older applications of isotopes pertaining to the environmental problems in one place that is readily accessible to readers. This book not only has the depth and rigor that is needed for academia, but it has the breadth and case studies to illustrate the utility of the isotopes in a wide variety of environments (atmosphere, oceans, lakes, rivers and streams, terrestrial environments, and sub-surface environments) and serves a large audience, from students and researchers, regulators in federal, state and local governments, and environmental companies. (orig.)

  10. Solar thermal extraction of copper from sulfides

    Energy Technology Data Exchange (ETDEWEB)

    Winkel, L.; Guesdon, C.; Sturzenegger, M.

    2003-03-01

    With the aim to develop a solar-driven process for the extraction of copper from sulfide concentrates re-search on the decomposition of copper sulfides under inert atmospheres has been initiated. Thermogravimetric measurements on chalcocite (Cu{sub 2}S) revealed that copper is formed already at 1823 K. Chalcopyrite (CuFeS{sub 2}) also disintegrates at this temperature, although at a lower rate. Copper and iron have been identified in the solid residue. The results confirm the feasibility of copper extraction by direct decomposition of sulfides under atmospheric pressure. The decomposition under inert atmosphere prevents generation of SO{sub 2}, and is beneficial to the removal of volatile impurities. Chemical equilibrium calculations for CuFeS{sub 2} contaminated with enargite (Cu{sub 3}AsS{sub 4}) have shown that the absence of an oxidic slag allows for a complete evaporation of arsenic and subsequent separation. (author)

  11. Bioremediation: Copper Nanoparticles from Electronic-waste

    Directory of Open Access Journals (Sweden)

    D. R. MAJUMDER

    2012-10-01

    Full Text Available A single-step eco-friendly approach has been employed to synthesize copper nanoparticles. The superfast advancement in the field of electronics has given rise to a new type of waste called electronic waste. Since the physical and chemical recycling procedures have proved to be hazardous, the present work aims at the bioremediation of e-waste in order to recycle valuable metals. Microorganisms such as Fusarium oxysporum and Pseudomonas sp. were able to leach copper (84-130 nm from integrated circuits present on electronic boards under ambient conditions. Lantana camara, a weed commonly found in Maharashtra was also screened for leaching copper. The characteristics of the copper nanoparticles obtained were studied using X-ray diffraction analysis, energy-dispersive spectroscopy, scanning electron microscopy, Fourier Tranform Infrared analysis, Transmission electron microscopy, Thermogravimetric analysis and Cyclic Voltammetry. Copper nanoparticles were found to be effective against hospital strain Escherichia coli 2065.

  12. Xinjiang to Build Its Largest Copper Mine

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>On September 16, the 6,000,000-ton mining project of Hudehe Copper Mine kicked off, which is the largest copper mine in Xinjiang.Jointly developed by Xinjiang Nonferrous Metals Group and Gansu Jianxin Group, Hudehe Copper Mine is located at Tuoli County, Tacheng Prefecture, Xinjiang. It is a large-scale porphyry-type copper deposit with proven copper reserve of 362,500 tons and prospective reserve of 1,000,000 tons(metal content). According to the preliminary plan, it will be built into a mine with mining and dressing capacity of 6,000,000 tons/year. With a total investment of RMB 1.466 billion, the project is expected to achieve annual sales revenue of RMB 0.8 billion and provide jobs for nearly 1,000 people.

  13. An Analysis of Contemporary Copper Recycling in China

    Institute of Scientific and Technical Information of China (English)

    YUE Qiang; LU Zhong-wu

    2006-01-01

    Copper consumption increased very quickly in China in recent years, which could not be met by inland copper industry. In order to achieve a sustainable development of copper industry, an analysis of copper recycling in China was necessary. For the life cycle of copper products a copper-flow diagram with time factor was worked out and the contemporary copper recycling in China was analyzed, from which the following data were obtained. The average life cycle of copper products was 30 years. From 1998 to 2002, the use ratio of copper scraps in copper production, the use ratio of copper scraps in copper manufacture, the materials self-support ratio in copper production, and the materials self-support ratio in copper manufacture were 26.50%, 15.49%, 48.05% and 59.41%, respectively. The materials self-support ratios in copper production and manufacture declined year by year in recent years on the whole, and the latter dropped more quickly. The average index of copper ore and copper scrap from 1998 to 2002 were 0.8475 t/t and 0.0736 t/t, respectively; and copper resource efficiency was 1.1855 t/t. Some efforts should be paid to reduce copper ores consumption and promote copper scraps regeneration.Copper scraps were mostly imported from foreign countries because of shortage in recent years in China. Here the reasons related to copper scraps deficiency were also demonstrated. But we can forecast: when copper production was in a slow rise or in a steady state in China, the deficiency of copper scraps may be mitigated; when copper production was in a steady state for a very long time, copper scraps may become relatively abundant. According to the status of copper industry in China, the raw materials of copper production and manufacture have to depend on oversea markets heavily in recent years, and at the same time, the copper scraps using proportion and efficiency in copper industry should be improved.

  14. The complex nature of superconductivity in MgB2 as revealed by the reduced total isotope effect.

    Science.gov (United States)

    Hinks, D G; Claus, H; Jorgensen, J D

    2001-05-24

    Magnesium diboride, MgB2, was recently observed to become superconducting at 39 K, which is the highest known transition temperature for a non-copper-oxide bulk material. Isotope-effect measurements, in which atoms are substituted by isotopes of different mass to systematically change the phonon frequencies, are one of the fundamental tests of the nature of the superconducting mechanism in a material. In a conventional Bardeen-Cooper-Schrieffer (BCS) superconductor, where the mechanism is mediated by electron-phonon coupling, the total isotope-effect coefficient (in this case, the sum of both the Mg and B coefficients) should be about 0.5. The boron isotope effect was previously shown to be large and that was sufficient to establish that MgB2 is a conventional superconductor, but the Mg effect has not hitherto been measured. Here we report the determination of the Mg isotope effect, which is small but measurable. The total reduced isotope-effect coefficient is 0.32, which is much lower than the value expected for a typical BCS superconductor. The low value could be due to complex materials properties, and would seem to require both a large electron-phonon coupling constant and a value of mu* (the repulsive electron-electron interaction) larger than found for most simple metals.

  15. Photonuclear reactions on titanium isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Belyshev, S. S. [Moscow State University (Russian Federation); Dzhilavyan, L. Z. [Russian Academy of Sciences, Institute for Nuclear Research (Russian Federation); Ishkhanov, B. S.; Kapitonov, I. M. [Moscow State University (Russian Federation); Kuznetsov, A. A., E-mail: kuznets@depni.sinp.msu.ru; Orlin, V. N.; Stopani, K. A. [Moscow State University, Skobeltsyn Institute of Nuclear Physics (Russian Federation)

    2015-03-15

    The photodisintegration of titanium isotopes in the giant-dipole-resonance energy region is studied by the photon-activation method. Bremsstrahlung photons whose spectrum has the endpoint energy of 55 MeV is used. The yields and integrated cross sections are determined for photoproton reactions on the titanium isotopes {sup 47,48,49,50}Ti. The respective experimental results are compared with their counterparts calculated on the basis of the TALYS code and a combined photonucleon-reaction model. The TALYS code disregards the isospin structure of the giant dipole resonance and is therefore unable to describe the yield of photoproton reactions on the heavy titanium isotopes {sup 49,50}Ti.

  16. Sulfur isotope budget (32S, 33S, 34S and 36S) in Pacific-Antarctic ridge basalts: A record of mantle source heterogeneity and hydrothermal sulfide assimilation

    Science.gov (United States)

    Labidi, J.; Cartigny, P.; Hamelin, C.; Moreira, M.; Dosso, L.

    2014-05-01

    To better address how Mid-Ocean Ridge Basalt (MORB) sulfur isotope composition can be modified by assimilation and/or by immiscible sulfide fractionation, we report sulfur (S), chlorine (Cl) and copper (Cu) abundances together with multiple sulfur isotope composition for 38 fresh basaltic glasses collected on the Pacific-Antarctic ridge. All the studied glasses - with the exception of 8 off-axis samples - exhibit relatively high Cl/K, as the result of pervasive Cl-rich fluid assimilation. This sample set hence offers an opportunity to document both the upper mantle S isotope composition and the effect of hydrothermal fluids assimilation on the S isotope composition of erupted basalts along segments that are devoid of plume influence.

  17. Surface films and corrosion of copper

    Energy Technology Data Exchange (ETDEWEB)

    Hilden, J.; Laitinen, T.; Maekelae, K.; Saario, T.; Bojinov, M. [VTT Manufacturing Technology, Espoo (Finland)

    1999-03-01

    In Sweden and Finland the spent nuclear fuel is planned to be encapsulated in cast iron canisters that have an outer shield made of copper. The copper shield is responsible for the corrosion protection of the canister construction. General corrosion of the copper is not expected to be the limiting factor in the waste repository environment when estimating the life-time of the canister construction. However, different forms of localised corrosion, i.e. pitting, stress corrosion cracking, or environmentally assisted creep fracture may cause premature failure of the copper shield. Of the probable constituents in the groundwater, nitrites, chlorides, sulphides and carbonates have been suggested to promote localised corrosion of copper. The main assumption made in planning this research program is that the surface films forming on copper in the repository environment largely determine the susceptibility of copper to the different forms of localised corrosion. The availability of reactants, which also may become corrosion rate limiting, is investigated in several other research programs. This research program consists of a set of successive projects targeted at characterising the properties of surface films on copper in repository environment containing different detrimental anions. A further aim was to assess the significance of the anion-induced changes in the stability of the oxide films with regard to localised corrosion of copper. This report summarises the results from a series of investigations on properties of surface films forming on copper in water of pH = 8.9 at temperature of 80 deg C and pressure of 2 MPa. The main results gained so far in this research program are as follows: The surface films forming on copper in the thermodynamic stability region of monovalent copper at 80 deg C consist of a bulk part (about 1 mm thick) which is a good ionic and electronic conductor, and an outer, interfacial layer (0.001 - 0.005 mm thick) which shows p-type semiconductor

  18. Multiple sulfur isotope composition of oxidized Samoan melts and the implications of a sulfur isotope 'mantle array' in chemical geodynamics

    Science.gov (United States)

    Labidi, J.; Cartigny, P.; Jackson, M. G.

    2015-05-01

    To better address how subducted protoliths drive the Earth's mantle sulfur isotope heterogeneity, we report new data for sulfur (S) and copper (Cu) abundances, S speciation and multiple S isotopic compositions (32S, 33S, 34S, 36S) in 15 fresh submarine basaltic glasses from the Samoan archipelago, which defines the enriched-mantle-2 (EM2) endmember. Bulk S abundances vary between 835 and 2279 ppm. About 17 ± 11% of sulfur is oxidized (S6+) but displays no consistent trend with bulk S abundance or any other geochemical tracer. The S isotope composition of both dissolved sulfide and sulfate yield homogeneous Δ33S and Δ36S values, within error of Canyon Diablo Troilite (CDT). In contrast, δ34S values are variable, ranging between +0.11 and +2.79‰ (±0.12‰ 1σ) for reduced sulfur, whereas oxidized sulfur values vary between +4.19 and +9.71‰ (±0.80‰, 1σ). Importantly, δ34S of the reduced S pool correlates with the 87Sr/86Sr ratios of the glasses, in a manner similar to that previously reported for South-Atlantic MORB, extending the trend to δ34S values up to + 2.79 ± 0.04 ‰, the highest value reported for undegassed oceanic basalts. As for EM-1 basalts from the South Atlantic ridge, the linear δ34S-87Sr/86Sr trend requires the EM-2 endmember to be relatively S-rich, and only sediments can account for these isotopic characteristics. While many authors argue that both the EM-1 and EM-2 mantle components record subduction of various protoliths (e.g. upper or lower continental crust, lithospheric mantle versus intra-metasomatized mantle, or others), it is proposed here that they primarily reflect sediment recycling. Their distinct Pb isotope variation can be accounted for by varying the proportion of S-poor recycled oceanic crust in the source of mantle plumes.

  19. The terrestrial uranium isotope cycle.

    Science.gov (United States)

    Andersen, Morten B; Elliott, Tim; Freymuth, Heye; Sims, Kenneth W W; Niu, Yaoling; Kelley, Katherine A

    2015-01-15

    Changing conditions on the Earth's surface can have a remarkable influence on the composition of its overwhelmingly more massive interior. The global distribution of uranium is a notable example. In early Earth history, the continental crust was enriched in uranium. Yet after the initial rise in atmospheric oxygen, about 2.4 billion years ago, the aqueous mobility of oxidized uranium resulted in its significant transport to the oceans and, ultimately, by means of subduction, back to the mantle. Here we explore the isotopic characteristics of this global uranium cycle. We show that the subducted flux of uranium is isotopically distinct, with high (238)U/(235)U ratios, as a result of alteration processes at the bottom of an oxic ocean. We also find that mid-ocean-ridge basalts (MORBs) have (238)U/(235)U ratios higher than does the bulk Earth, confirming the widespread pollution of the upper mantle with this recycled uranium. Although many ocean island basalts (OIBs) are argued to contain a recycled component, their uranium isotopic compositions do not differ from those of the bulk Earth. Because subducted uranium was probably isotopically unfractionated before full oceanic oxidation, about 600 million years ago, this observation reflects the greater antiquity of OIB sources. Elemental and isotope systematics of uranium in OIBs are strikingly consistent with previous OIB lead model ages, indicating that these mantle reservoirs formed between 2.4 and 1.8 billion years ago. In contrast, the uranium isotopic composition of MORB requires the convective stirring of recycled uranium throughout the upper mantle within the past 600 million years.

  20. [Atomic absorption spectrophotometry study of copper ion release by copper-bearing intrauterine devices].

    Science.gov (United States)

    Berthou, J; Chrétien, F C; Driguez, P A

    1998-11-01

    Copper release from copper-bearing IUD's was studied in vitro and in vivo using atomic absorption spectrophotometry in deionized water, normal saline solution and normal ovulatory cervical mucus. In these media, copper release from a 375 mm2 DIU occurs without latency, showing comparable amounts for identical time intervals. Daily copper release was shown to be respectively 8 and 11 times higher in cervical mucus and normal saline solution than in deionized water. Although copper ions are detectable in ovulatory cervical mucus under physiological conditions, the copper content appears 5 to 6 times higher in women bearing a copper IUD. Obviously, the copper amount is dependent on the copper exposed surface: the daily in vitro release from a 250 mm2 IUD is 18% inferior to that observed from a 375 mm2 model. In vivo, the daily copper release in ovulatory mucus of 380 or 200 mm2 IUD users is respectively 5 and 3.5 times higher than in controls.

  1. Molecular responses of mouse macrophages to copper and copper oxide nanoparticles inferred from proteomic analyses.

    Science.gov (United States)

    Triboulet, Sarah; Aude-Garcia, Catherine; Carrière, Marie; Diemer, Hélène; Proamer, Fabienne; Habert, Aurélie; Chevallet, Mireille; Collin-Faure, Véronique; Strub, Jean-Marc; Hanau, Daniel; Van Dorsselaer, Alain; Herlin-Boime, Nathalie; Rabilloud, Thierry

    2013-11-01

    The molecular responses of macrophages to copper-based nanoparticles have been investigated via a combination of proteomic and biochemical approaches, using the RAW264.7 cell line as a model. Both metallic copper and copper oxide nanoparticles have been tested, with copper ion and zirconium oxide nanoparticles used as controls. Proteomic analysis highlighted changes in proteins implicated in oxidative stress responses (superoxide dismutases and peroxiredoxins), glutathione biosynthesis, the actomyosin cytoskeleton, and mitochondrial proteins (especially oxidative phosphorylation complex subunits). Validation studies employing functional analyses showed that the increases in glutathione biosynthesis and in mitochondrial complexes observed in the proteomic screen were critical to cell survival upon stress with copper-based nanoparticles; pharmacological inhibition of these two pathways enhanced cell vulnerability to copper-based nanoparticles, but not to copper ions. Furthermore, functional analyses using primary macrophages derived from bone marrow showed a decrease in reduced glutathione levels, a decrease in the mitochondrial transmembrane potential, and inhibition of phagocytosis and of lipopolysaccharide-induced nitric oxide production. However, only a fraction of these effects could be obtained with copper ions. In conclusion, this study showed that macrophage functions are significantly altered by copper-based nanoparticles. Also highlighted are the cellular pathways modulated by cells for survival and the exemplified cross-toxicities that can occur between copper-based nanoparticles and pharmacological agents.

  2. Molecular Responses of Mouse Macrophages to Copper and Copper Oxide Nanoparticles Inferred from Proteomic Analyses*

    Science.gov (United States)

    Triboulet, Sarah; Aude-Garcia, Catherine; Carrière, Marie; Diemer, Hélène; Proamer, Fabienne; Habert, Aurélie; Chevallet, Mireille; Collin-Faure, Véronique; Strub, Jean-Marc; Hanau, Daniel; Van Dorsselaer, Alain; Herlin-Boime, Nathalie; Rabilloud, Thierry

    2013-01-01

    The molecular responses of macrophages to copper-based nanoparticles have been investigated via a combination of proteomic and biochemical approaches, using the RAW264.7 cell line as a model. Both metallic copper and copper oxide nanoparticles have been tested, with copper ion and zirconium oxide nanoparticles used as controls. Proteomic analysis highlighted changes in proteins implicated in oxidative stress responses (superoxide dismutases and peroxiredoxins), glutathione biosynthesis, the actomyosin cytoskeleton, and mitochondrial proteins (especially oxidative phosphorylation complex subunits). Validation studies employing functional analyses showed that the increases in glutathione biosynthesis and in mitochondrial complexes observed in the proteomic screen were critical to cell survival upon stress with copper-based nanoparticles; pharmacological inhibition of these two pathways enhanced cell vulnerability to copper-based nanoparticles, but not to copper ions. Furthermore, functional analyses using primary macrophages derived from bone marrow showed a decrease in reduced glutathione levels, a decrease in the mitochondrial transmembrane potential, and inhibition of phagocytosis and of lipopolysaccharide-induced nitric oxide production. However, only a fraction of these effects could be obtained with copper ions. In conclusion, this study showed that macrophage functions are significantly altered by copper-based nanoparticles. Also highlighted are the cellular pathways modulated by cells for survival and the exemplified cross-toxicities that can occur between copper-based nanoparticles and pharmacological agents. PMID:23882024

  3. Non-linear Isotope Effects

    DEFF Research Database (Denmark)

    Schmidt, Johan Albrecht

    The isotopic fractionation associated with photodissociation of N2O, OCS and CO2, at different altitudes in Earth’s atmosphere, is investigated theoretically using constructed quantum mechanical models of the dissociation processes (i.e. potential energy surfaces and relevant coupling elements...... or moderate, and overall sulfur fractionation in the stratosphere is very weak which does not exclude OCS from being an acceptable background the Stratospheric Sulfate Aerosol layer. (iii) CO2 photolysis in the upper stratosphere and lower mesosphere is highly fractionating in both isotopes, enriching...

  4. Evaluation of copper resistant bacteria from vineyard soils and mining waste for copper biosorption

    Science.gov (United States)

    Andreazza, R.; Pieniz, S.; Okeke, B.C.; Camargo, F.A.O

    2011-01-01

    Vineyard soils are frequently polluted with high concentrations of copper due application of copper sulfate in order to control fungal diseases. Bioremediation is an efficient process for the treatment of contaminated sites. Efficient copper sorption bacteria can be used for bioremoval of copper from contaminated sites. In this study, a total of 106 copper resistant bacteria were examined for resistance to copper toxicity and biosorption of copper. Eighty isolates (45 from vineyard Mollisol, 35 from Inceptisol) were obtained from EMBRAPA (Empresa Brasileira de Pesquisa Agropecuária) experimental station, Bento Gonçalves, RS, Brazil (29°09′53.92″S and 51°31′39.40″W) and 26 were obtained from copper mining waste from Caçapava do Sul, RS, Brazil (30°29′43.48″S and 53′32′37.87W). Based on resistance to copper toxicity and biosorption, 15 isolates were identified by 16S rRNA gene sequencing. Maximal copper resistance and biosorption at high copper concentration were observed with isolate N2 which removed 80 mg L−1 in 24 h. Contrarily isolate N11 (Bacillus pumilus) displayed the highest specific copper biosorption (121.82 mg/L/OD unit in 24 h). GenBank MEGABLAST analysis revealed that isolate N2 is 99% similar to Staphylococcus pasteuri. Results indicate that several of our isolates have potential use for bioremediation treatment of vineyards soils and mining waste contaminated with high copper concentration. PMID:24031606

  5. Sulfur, carbon, hydrogen, and oxygen isotope geochemistry of the Idaho cobalt belt

    Science.gov (United States)

    Johnson, Craig A.; Bookstrom, Arthur A.; Slack, John F.

    2012-01-01

    Cobalt-copper ± gold deposits of the Idaho cobalt belt, including the deposits of the Blackbird district, have been analyzed for their sulfur, carbon, hydrogen, and oxygen isotope compositions to improve the understanding of ore formation. Previous genetic hypotheses have ranged widely, linking the ores to the sedimentary or diagenetic history of the host Mesoproterozoic sedimentary rocks, to Mesoproterozoic or Cretaceous magmatism, or to metamorphic shearing. The δ34S values are nearly uniform throughout the Blackbird dis- trict, with a mean value for cobaltite (CoAsS, the main cobalt mineral) of 8.0 ± 0.4‰ (n = 19). The data suggest that (1) sulfur was derived at least partly from sedimentary sources, (2) redox reactions involving sulfur were probably unimportant for ore deposition, and (3) the sulfur was probably transported to sites of ore for- mation as H2S. Hydrogen and oxygen isotope compositions of the ore-forming fluid, which are calculated from analyses of biotite-rich wall rocks and tourmaline, do not uniquely identify the source of the fluid; plausible sources include formation waters, metamorphic waters, and mixtures of magmatic and isotopically heavy meteoric waters. The calculated compositions are a poor match for the modified seawaters that form vol- canogenic massive sulfide (VMS) deposits. Carbon and oxygen isotope compositions of siderite, a mineral that is widespread, although sparse, at Blackbird, suggest formation from mixtures of sedimentary organic carbon and magmatic-metamorphic carbon. The isotopic compositions of calcite in alkaline dike rocks of uncertain age are consistent with a magmatic origin. Several lines of evidence suggest that siderite postdated the emplacement of cobalt and copper, so its significance for the ore-forming event is uncertain. From the stable isotope perspective, the mineral deposits of the Idaho cobalt belt contrast with typical VMS and sedimentary exhalative deposits. They show characteristics of deposit

  6. Kinetics of the conversion of copper sulfide to blister copper

    Directory of Open Access Journals (Sweden)

    Carrillo, F.

    2002-10-01

    Full Text Available The desulfurization of copper sulfide by air and oxygen has been studied in two laboratory reactors where the gas is blown onto the melt surface. Rates of oxidation in a vertical resistance furnace may be explained by the mass transfer control in the gas phase. However, results for a horizontal tube suggest that the chemical resistance is controlling.

    La desulfuración del sulfuro cuproso con aire y oxígeno se ha estudiado en dos reactores de laboratorio, en los cuales el gas se sopla sobre la superficie del fundido. La velocidad de reacción en un horno de resistencias verticales se puede explicar considerando como controlante la resistencia a la transferencia de materia de la fase gas. Sin embargo, los resultados del horno horizontal indican que la resistencia química es la controlante.

  7. Relapsing hypocupraemic myelopathy requiring high‐dose oral copper replacement

    OpenAIRE

    Prodan, C.I.; Bottomley, S S; Holland, N R; Lind, S. E.

    2006-01-01

    Adult‐onset copper deficiency with neurological manifestations is a newly recognised syndrome. Long‐term oral copper replacement therapy has been the mainstay of treatment in the literature. A case of relapsing hypocupraemic myelopathy responsive to increased doses of copper replacement is reported. Standard doses of copper may not be sufficient for all patients.

  8. The various faces of copper in laboratory animals

    NARCIS (Netherlands)

    Wolf, Ingeborg Désirée de

    2001-01-01

    All research described in this thesis focuses on the role of copper in various biochemical processes. It appears that copper has various faces in laboratory animals. On the one hand, copper is an essential trace element, which implicates that a certain requirement for copper exists. On the other

  9. China’s Copper Industry Development and the Prospects

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    <正>Since the founding of the People’s Republic, China has given priority to the development of the copper industry, and for a long period of time, copper industry has been placed in the first categories of the industry development in China. Nevertheless, due to the restricted copper resources, the copper mining industry development was rather slow and by the end of

  10. The separation of stable isotopes of carbon

    Science.gov (United States)

    Oziashvili, E. D.; Egiazarov, A. S.

    1989-04-01

    The present state of work on the separation of carbon isotopes by diffusion, fractional distillation, chemical isotopic exchange, and the selective excitation and dissociation of molecules in electrical discharges or in the field of laser radiation has been examined. The characteristics of new laboratory and industrial assemblies for separating carbon isotopes have been described. Promising directions of study aimed at developing effective technological processes for separating carbon isotopes have been noted. The bibliography contains 148 references.

  11. Brief review on the development of isotope hydrology in China

    Institute of Scientific and Technical Information of China (English)

    汪集旸; 孙占学

    2001-01-01

    The development of isotope hydrology in China is briefly reviewed. It includes oxygen and hydrogen isotopes of precipitation, application of isotope hydrological methodologies in solving water resources problems, isotope hydrological studies on brines and salt lake waters, as well as isotope hydrological investigations of thermal waters. The review focuses on isotope hydrology in China during the last two decades.

  12. Tarnished copper IUDs still safe and effective.

    Science.gov (United States)

    1989-01-01

    Due to the presence of tarnish on copper T 380A (TCU 380A) intrauterine devices (IUDs) still in their wrappers, family planning providers in developing countries were concerned over their safety and effectiveness. This article explains why there is tarnish on the copper IUDs and why these IUDs are still sterile as long as their packaging is intact. The Population Council and Finishing Enterprises, the developer and the manufacturer of the devise respectively, along with several chemists, have determined that the tarnishing in no way reflects the sterility of the IUD. The IUD packages are permeable to gases but impermeable to microorganisms so that packages of IUDs can be sterilized with ethylene oxide and then stay sterile because no microorganisms can get to the IUD. Tarnishing is caused by the normal oxidation of copper which gives a surface layer of copper oxide. Normally, this surface layer is too thin to be visible, but 10% of the time a thicker layer of copper oxide or what is called "tarnishing" develops on copper IUDs. Copper IUDs have the same efficiency whether or not they are tarnished. Finishing Enterprises is now conducting research on how to slow down the oxidation process.

  13. Electrochromism in copper oxide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, T.J.; Slack, J.L.; Rubin, M.D.

    2000-08-15

    Transparent thin films of copper(I) oxide prepared on conductive SnO2:F glass substrates by anodic oxidation of sputtered copper films or by direct electrodeposition of Cu2O transformed reversibly to opaque metallic copper films when reduced in alkaline electrolyte. In addition, the same Cu2O films transform reversibly to black copper(II) oxide when cycled at more anodic potentials. Copper oxide-to-copper switching covered a large dynamic range, from 85% and 10% photopic transmittance, with a coloration efficiency of about 32 cm2/C. Gradual deterioration of the switching range occurred over 20 to 100 cycles. This is tentatively ascribed to coarsening of the film and contact degradation caused by the 65% volume change on conversion of Cu to Cu2O. Switching between the two copper oxides (which have similar volumes) was more stable and more efficient (CE = 60 cm2/C), but covered a smaller transmittance range (60% to 44% T). Due to their large electrochemical storage capacity and tolerance for alkaline electrolytes, these cathodically coloring films may be useful as counter electrodes for anodically coloring electrode films such as nickel oxide or metal hydrides.

  14. Fully additive copper metallization on BCB

    Energy Technology Data Exchange (ETDEWEB)

    Stolle, T. [FhG-IZM Berlin (Germany); Schwencke, B.; Reichl, H.

    2000-07-01

    A fully additive copper metallization process on benzocyclobutene cyclotene trademark (BCB) has been investigated for application in MCM-D technology. The process consists of surface pretreatment of the BCB basic layer by reactive ion etching (RIE), spin-coating and photopatterning of an organic seed layer by broad-band I-line photolithography followed by developing and activation steps. The metallization of the seed patterns is performed by a 2-step process by means of electroless copper baths. A height of about 5 {mu}m selectively deposited copper can be achieved. The electrical conductivity of patterns is in the range of 80% - 85% of the bulk conductivity of pure copper. Adhesive strength tests during accelerated aging show good adhesion of copper to the BCB surface, which is influenced by RIE pretreatment, exposure dose and thermal load. Shear experiments performed with optimal treated 200 x 200 {mu}m bumps show shear forces > 150 cN. Design rules have to take into account the lateral growth of copper patterns, which is nearly equal to the vertical growth. Real spaces of {>=} 30 {mu}m between copper lines are possible. The process is considered as a low cost technology because of replacing of sputter technique, few process steps and waste reduction. (orig.)

  15. Electron Percolation In Copper Infiltrated Carbon

    Science.gov (United States)

    Krcho, Stanislav

    2015-11-01

    The work describes the dependence of the electrical conductivity of carbon materials infiltrated with copper in a vacuum-pressure autoclave on copper concentration and on the effective pore radius of the carbon skeleton. In comparison with non-infiltrated material the electrical conductivity of copper infiltrated composite increased almost 500 times. If the composite contained less than 7.2 vol% of Cu, a linear dependence of the electrical conductivity upon cupper content was observed. If infiltrated carbon contained more than 7.2 vol% of Cu, the dependence was nonlinear - the curve could be described by a power formula (x - xc)t. This is a typical formula describing the electron percolation process in regions containing higher Cu fraction than the critical one. The maximum measured electrical conductivity was 396 × 104 Ω-1 m-1 for copper concentration 27.6 vol%. Experiments and analysis of the electrical conductivity showed that electron percolation occurred in carbon materials infiltrated by copper when the copper volume exceeded the critical concentration. The analysis also showed a sharp increase of electrical conductivity in composites with copper concentration higher than the threshold, where the effective radius of carbon skeleton pores decreased to 350 nanometres.

  16. Dry phase reactor for generating medical isotopes

    Science.gov (United States)

    Mackie, Thomas Rockwell; Heltemes, Thad Alexander

    2016-05-03

    An apparatus for generating medical isotopes provides for the irradiation of dry-phase, granular uranium compounds which are then dissolved in a solvent for separation of the medical isotope from the irradiated compound. Once the medical isotope is removed, the dissolved compound may be reconstituted in dry granular form for repeated irradiation.

  17. Substitution of stable isotopes in Chlorella

    Science.gov (United States)

    Flaumenhaft, E.; Katz, J. J.; Uphaus, R. A.

    1969-01-01

    Replacement of biologically important isotopes in the alga Chlorella by corresponding heavier stable isotopes produces increasingly greater deviations from the normal cell size and changes the quality and distribution of certain cellular components. The usefulness of isotopically altered organisms increases interest in the study of such permuted organisms.

  18. The Effective Electrolytic Recovery of Dilute Copper from Industrial Wastewater

    Directory of Open Access Journals (Sweden)

    Teng-Chien Chen

    2013-01-01

    Full Text Available Electroplating copper industry was discharged huge amount wastewater and cause serious environmental and health damage in Taiwan. This research applied electrical copper recovery system to recover copper metal. In this work, electrotreatment of a industrial copper wastewater ([Cu] = 30000 mg L−1 was studied with titanium net coated with a thin layer of RuO2/IrO2 (DSA reactor. The optimal result for simulated copper solution was 99.9% copper recovery efficiency in current density 0.585 A/dm2 and no iron ion. Due to high concentration of iron and chloride ions in real industrial wastewater, the copper recovery efficiency was down to 60%. Although, the copper recovery efficiency was not high as simulated copper solution, high environmental economic value was included in the technology. The possibility of pretreating the wastewater with iron is the necessary step, before the electrical recovery copper system.

  19. In situ deposits of copper and copper oxide containing condensation polyimide films

    Science.gov (United States)

    Porta, G. M.; Taylor, L. T.

    1987-01-01

    Novel copper-polyimide composites have been synthesized via simultaneous thermal decomposition of solid solutions of bis (trifluoroacetylacetonato) copper (II) and thermal cyclodehydration of polyimide acid. In contrast to conventional filled polymer composites which are prepared by dispersion of particles or fibers in a polymer matrix this study has yielded in general uniform Cu or CuO dispersions of very small particle size that reside near the film surface that was exposed to the atmosphere during curing. The nature of the copper deposit, the thickness of the copper deposit, and the polyimide overlayer which bonds the copper to the polymer substrate depend on the curing atmosphere used. A variety of analytical surface methods along with thermogravimetric analysis and variable temperature (surface and volume) electrical resistivity measurements have been used to characterize these thin, flexible copper doped polyimide films.

  20. Copper localization, elemental content, and thallus colour in the copper hyperaccumulator lichen Lecanora sierrae from California

    Science.gov (United States)

    Purvis, O.W.; Bennett, J.P.; Spratt, J.

    2011-01-01

    An unusual dark blue-green lichen, Lecanora sierrae, was discovered over 30 years ago by Czehura near copper mines in the Lights Creek District, Plumas County, Northern California. Using atomic absorption spectroscopy, Czehura found that dark green lichen samples from Warren Canyon contained 4% Cu in ash and suggested that its colour was due to copper accumulation in the cortex. The present study addressed the hypothesis that the green colour in similar material we sampled from Warren Canyon in 2008, is caused by copper localization in the thallus. Optical microscopy and electron microprobe analysis of specimens of L. sierrae confirmed that copper localization took place in the cortex. Elemental analyses of L. sierrae and three other species from the same localities showed high enrichments of copper and selenium, suggesting that copper selenates or selenites might occur in these lichens and be responsible for the unusual colour. Copyright ?? 2011 British Lichen Society.

  1. Copper localization, elemental content, and thallus colour in the copper hyperaccumulator lichen Lecanora sierra from California

    Science.gov (United States)

    Purvis, O.W.; Bennett, J.P.; Spratt, J.

    2011-01-01

    An unusual dark blue-green lichen, Lecanora sierrae, was discovered over 30 years ago by Czehura near copper mines in the Lights Creek District, Plumas County, Northern California. Using atomic absorption spectroscopy, Czehura found that dark green lichen samples from Warren Canyon contained 4% Cu in ash and suggested that its colour was due to copper accumulation in the cortex. The present study addressed the hypothesis that the green colour in similar material we sampled from Warren Canyon in 2008, is caused by copper localization in the thallus. Optical microscopy and electron microprobe analysis of specimens of L. sierrae confirmed that copper localization took place in the cortex. Elemental analyses of L. sierrae and three other species from the same localities showed high enrichments of copper and selenium, suggesting that copper selenates or selenites might occur in these lichens and be responsible for the unusual colour.

  2. Thermodynamic Study on Process in Copper Converters (The Copper-making Stage)

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Theoretical calculations were based on thermodynamic equilibrium in the multi-component and multi-phase system with heat and mass balance as well as the oxygen efficiency to take account for the effects of process kinetics. The variations of temperature, mass fractions of dissolved oxygen and sulfur in blister copper, partial pressures for O2, S2, SO2 in gas phase for the copper-making stage were calculated. The model predicted temperature, time of blowing as well as mass of the blister copper at end points for 6 heats showed a fairly good agreements with corresponding plant data. The calculated content of 0.065% and content of 0.87% in blister copper were both at reasonable levels. Compared with the so called Goto model, the present model has very much improved process description of copper-making stage as well as the prediction of end points for a copper converter by introducing the oxygen efficiency.

  3. Jiangrun Copper Limited Company Set its Eyes on the Leading Position of Copper Processing Industry in China

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>Jiangrun Copper Limited Company’s total investment volume for projects of stranded copper wire with high strength and high conductivity as well as high-performance copper and copper alloy wire are 500 million yuan and 360 million yuan, respectively. The company plans to introduce 85 units (sets) of high-end

  4. Oxygen Isotope Effect and Structural Phase Transitions in La2CuO4-Based Superconductors.

    Science.gov (United States)

    Crawford, M K; Farneth, W E; McCarronn, E M; Harlow, R L; Moudden, A H

    1990-12-07

    The oxygen isotope effect on the superconducting transition temperature (alpha(o)) varies as a function of x in La2-xSrxCuO(4) and La2-xBaxCuO(4), with the maximum alpha(o) values (alpha(o) >/= 0.5) found for x near 0.12. This unusual x dependence implies that the isotope effect is influenced by proximity to the Abma --> P4(2)/ncm structural phase transition in these systems. Synchrotron x-ray difaction measurements reveal little change in lattice parameters or orthorhombicity due to isotope exchange in strontium-doped materials where alpha(o) > 0.5, eliminating static structural distortion as a cause of the large isotope effects. The anomalous behavior of alpha(o) in both strontium- and barium-doped materials, in combination with the previously discovered Abma --> P4(2)/ncm structural phase-transition in La(1.88)B(0.12)CuO(4), suggests that an electronic contribution to the lattice instability is present and maximizes at approximately 1/8 hole per copper atom. These observations indicate a dose connection between hole doping of the Cu-O sheets, tilting instabilities of the CuO(6) octahedra, and superconductivity in La(2)CuO(4)-based superconductors.

  5. A comparison of PET imaging characteristics of various copper radioisotopes

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Heather Ann [North Western Medical Physics, Christie Hospital NHS Trust, Manchester (United Kingdom); University of Manchester Institute of Science and Technology, Department of Instrumentation and Analytical Science, Manchester (United Kingdom); Robinson, Simon; Julyan, Peter; Hastings, David [North Western Medical Physics, Christie Hospital NHS Trust, Manchester (United Kingdom); Zweit, Jamal [University of Manchester Institute of Science and Technology, Department of Instrumentation and Analytical Science, Manchester (United Kingdom); Paterson Institute for Cancer Research, Radiochemical Targeting and Imaging, Manchester (United Kingdom)

    2005-12-01

    PET radiotracers which incorporate longer-lived radionuclides enable biological processes to be studied over many hours, at centres remote from a cyclotron. This paper examines the radioisotope characteristics, imaging performance, radiation dosimetry and production modes of the four copper radioisotopes, {sup 60}Cu,{sup 61}Cu,{sup 62}Cu and{sup 64}Cu, to assess their merits for different PET imaging applications. Spatial resolution, sensitivity, scatter fraction and noise-equivalent count rate (NEC) are predicted for{sup 60}Cu,{sup 61}Cu,{sup 62}Cu and{sup 64}Cu using a model incorporating radionuclide decay properties and scanner parameters for the GE Advance scanner. Dosimetry for{sup 60}Cu,{sup 61}Cu and{sup 64}Cu is performed using the MIRD model and published biodistribution data for copper(II) pyruvaldehyde bis(N{sup 4}-methyl)thiosemicarbazone (Cu-PTSM). {sup 60}Cu and{sup 62}Cu are characterised by shorter half-lives and higher sensitivity and NEC, making them more suitable for studying the faster kinetics of small molecules, such as Cu-PTSM.{sup 61}Cu and{sup 64}Cu have longer half-lives, enabling studies of the slower kinetics of cells and peptides and prolonged imaging to compensate for lower sensitivity, together with better spatial resolution, which partially compensates for loss of image contrast.{sup 61}Cu-PTSM and{sup 64}Cu-PTSM are associated with radiation doses similar to [{sup 18}F]-fluorodeoxyglucose, whilst the doses for{sup 60}Cu-PTSM and{sup 62}Cu-PTSM are lower and more comparable with H{sub 2}{sup 15}O. The physical and radiochemical characteristics of the four copper isotopes make each more suited to some imaging tasks than others. The results presented here assist in selecting the preferred radioisotope for a given imaging application, and illustrate a strategy which can be extended to the majority of novel PET tracers. (orig.)

  6. Activation of ADAM 12 protease by copper

    DEFF Research Database (Denmark)

    Loechel, F; Wewer, Ulla M.

    2001-01-01

    Conversion of latent proteases to the active form occurs by various mechanisms characteristic for different protease families. Here we report that the disintegrin metalloprotease ADAM 12-S is activated by Cu(II). Copper activation is distinct from the cysteine switch component of latency......: elimination of the ADAM 12 cysteine switch by a point mutation in the propeptide had no effect on copper activation, whereas mutation of an unpaired cysteine residue in the catalytic domain resulted in a mutant form of ADAM 12-S that was insensitive to copper. This suggests a multi-step activation mechanism...

  7. Graphene-protected copper and silver plasmonics

    DEFF Research Database (Denmark)

    Kravets, V. G.; Jalil, R.; Kim, Y. J.

    2014-01-01

    suitable for plasmonic applications. To this end, there has been a continuous search for alternative plasmonic materials that are also compatible with complementary metal oxide semiconductor technology. Here we show that copper and silver protected by graphene are viable candidates. Copper films covered...... with one to a few graphene layers show excellent plasmonic characteristics. They can be used to fabricate plasmonic devices and survive for at least a year, even in wet and corroding conditions. As a proof of concept, we use the graphene-protected copper to demonstrate dielectric loaded plasmonic...... waveguides and test sensitivity of surface plasmon resonances. Our results are likely to initiate wide use of graphene-protected plasmonics....

  8. Nanocrystalline Ni-W coatings on copper

    Energy Technology Data Exchange (ETDEWEB)

    Panagopoulos, C.N., E-mail: chpanag@metal.ntua.gr [Laboratory of Physical Metallurgy, National Technical University of Athens, Zografos, 15780, Athens (Greece); Plainakis, G.D.; Lagaris, D.A. [Laboratory of Physical Metallurgy, National Technical University of Athens, Zografos, 15780, Athens (Greece)

    2011-04-15

    Nanocrystalline Ni-W coatings were produced on copper substrates with the aid of electrodeposition technique. The morphology, chemical composition and structure of the produced coatings were examined with the aid of scanning electron microscopy (SEM), electron dispersive spectroscopy (EDS) and X-ray diffraction (XRD) techniques. The microhardness of alloy Ni-W coatings on copper substrate was also studied. The adhesion between the Ni-W coating, having W content 50 wt%, and the copper substrate, was also studied with a scratch testing apparatus. The scratch tests resulted in the coatings suffering an intensive brittle fracture and minor delamination.

  9. Isotope Harvesting Opportunities at FRIB

    Science.gov (United States)

    Morrissey, David

    2017-01-01

    The fragmentation of fast heavy ion beams now at the National Superconducting Cyclotron Laboratory (NSCL) and in the future at the Facility for Rare Isotope Beams (FRIB) under construction produce an unprecedentedly broad spectrum of radionuclides but only a small fraction are used in the on-line rare-isotope program. Projectile fragmentation facilities provide an electromagnetically purified beam of a single projectile fragment for nuclear physics experiments ranging from low energy astrophysics, through nuclear structure studies, to probing fundamental symmetries. By augmenting the NSCL and FRIB production facilities with complimentary collection and purification of discarded ions, called isotope harvesting with chemical purification, many other nuclides will become available for off-line experiments in parallel with the primary experiment. A growing user community has established a list of key target isotopes and is working with the FRIB design team to allow inclusion of necessary equipment in the future. An overview of the possibilities and the techniques will be presented in this talk. Supported by Office of Science, US DOE and Michigan State University.

  10. Operation of Electromagnetic Isotope Separator

    Institute of Scientific and Technical Information of China (English)

    MI; Ya-jing

    2015-01-01

    In 2015,we mainly completed the installation of the electromagnetic isotope separator comprehensive technical transformation projects,including the work of installation,debugging,commissioning and acceptance.In June 30,2015,according to the schedule requirements,the project

  11. Research Progress of Isotope Technology

    Institute of Scientific and Technical Information of China (English)

    Department; of; Isotope

    2015-01-01

    Radioactive isotope is one of the origins of nonnuclear power technology.In the 12th Five Year Plan period,CIAE made breakthrough progresses on several important fields such as research and development of preparation of radioactive nuclides,preparation of radioactive source and study of radiopharmaceuticals relied on different financial support,successfully

  12. Bayesian stable isotope mixing models

    Science.gov (United States)

    In this paper we review recent advances in Stable Isotope Mixing Models (SIMMs) and place them into an over-arching Bayesian statistical framework which allows for several useful extensions. SIMMs are used to quantify the proportional contributions of various sources to a mixtur...

  13. Dietary Management of Labrador Retrievers with Subclinical Hepatic Copper Accumulation

    OpenAIRE

    Fieten, H.; Biourge, V.C.; Watson, A.L.; Leegwater, P.A.J.; van den Ingh, T.S.G.A.M.; Rothuizen, J.

    2015-01-01

    Background Genetic and environmental factors, including dietary copper intake, contribute to the pathogenesis of copper‐associated hepatitis in Labrador retrievers. Clinical disease is preceded by a subclinical phase in which copper accumulates in the liver. Objective To investigate the effect of a low‐copper, high‐zinc diet on hepatic copper concentration in Labrador retrievers with increased hepatic copper concentrations. Animals Twenty‐eight clinically healthy, client‐owned Labrador retrie...

  14. Evolution of Copper Transporting ATPases in Eukaryotic Organisms

    OpenAIRE

    Gupta, Arnab; Lutsenko, Svetlana

    2012-01-01

    Copper is an essential nutrient for most life forms, however in excess it can be harmful. The ATP-driven copper pumps (Copper-ATPases) play critical role in living organisms by maintaining appropriate copper levels in cells and tissues. These evolutionary conserved polytopic membrane proteins are present in all phyla from simplest life forms (bacteria) to highly evolved eukaryotes (Homo sapiens). The presumed early function in metal detoxification remains the main function of Copper-ATPases i...

  15. Effect of water treatment residuals on soil phosphorus, copper and aluminium availability and toxicity

    Energy Technology Data Exchange (ETDEWEB)

    Lombi, E., E-mail: enzo.lombi@unisa.edu.a [CSIRO Land and Water, Centre for Environmental Contaminant Research, PMB 2, Glen Osmond, SA 5064 (Australia); Centre for Environmental Risk Assessment and Remediation, University of South Australia, Building X, Mawson Lakes Campus, Mawson Lakes, SA 5095 (Australia); CRC CARE, PO Box 486, Salisbury, SA 5106 (Australia); Stevens, D.P. [CSIRO Land and Water, Centre for Environmental Contaminant Research, PMB 2, Glen Osmond, SA 5064 (Australia); Arris Pty Ltd, PO Box 5143, Burnley, Victoria 3121 (Australia); McLaughlin, M.J. [CSIRO Land and Water, Centre for Environmental Contaminant Research, PMB 2, Glen Osmond, SA 5064 (Australia); Soil and Land Systems, University of Adelaide, PMB 1, Glen Osmond, SA 5064 (Australia)

    2010-06-15

    Water treatment residuals (WTRs) are produced by the treatment of potable water with coagulating agents. Beneficial recycling in agriculture is hampered by the fact that WTRs contain potentially toxic contaminants (e.g. copper and aluminium) and they bind phosphorus strongly. These issues were investigated using a plant bioassay (Lactuca sativa), chemical extractions and an isotopic dilution technique. Two WTRs were applied to an acidic and a neutral pH soil at six rates. Reductions in plant growth in amended soils were due to WTR-induced P deficiency, rather than Al or Cu toxicity. The release of potentially toxic Al from WTRs was found to be mitigated by their alkaline nature and pH buffering capacity. However, acidification of WTRs was shown to release more soluble Al than soil naturally high in Al. Copper availability was relatively low in all treatments. However, the lability of WTR-Cu increased when the WTR was applied to the soil. - The effect of water treatment residue application to soil was investigated in relation to phosphorus availability, and copper and aluminium phytotoxicity.

  16. Copper adsorption in tropical oxisols

    Directory of Open Access Journals (Sweden)

    Silveira Maria Lucia Azevedo

    2003-01-01

    Full Text Available Cu adsorption, at concentrations between 0 to 800 mg L-1, was evaluated in surface and subsurface samples of three Brazilian soils: a heavy clayey-textured Rhodic Hapludalf (RH, a heavy clayey-textured Anionic ''Rhodic'' Acrudox (RA and a medium-textured Anionic ''Xanthic'' Acrudox (XA. After adsorption, two consecutive extractions were performed to the samples which received 100 mg L-1 copper. Surface samples adsorbed higher amounts of Cu than the subsurface, and exhibited lower Cu removed after the extractions, reinforcing the influence of the organic matter in the reactions. Cu adsorption was significant in the subsurface horizons of the Oxisols, despite the positive balance of charge, demonstrating the existence of mechanisms for specific adsorption, mainly related to the predominance of iron and aluminum oxides in the mineral fractions. In these samples, Cu was easily removed from the adsorption sites. RH demonstrated a higher capacity for the Cu adsorption in both horizons.

  17. Metallochaperones regulate intracellular copper levels.

    Directory of Open Access Journals (Sweden)

    W Lee Pang

    Full Text Available Copper (Cu is an important enzyme co-factor that is also extremely toxic at high intracellular concentrations, making active efflux mechanisms essential for preventing Cu accumulation. Here, we have investigated the mechanistic role of metallochaperones in regulating Cu efflux. We have constructed a computational model of Cu trafficking and efflux based on systems analysis of the Cu stress response of Halobacterium salinarum. We have validated several model predictions via assays of transcriptional dynamics and intracellular Cu levels, discovering a completely novel function for metallochaperones. We demonstrate that in addition to trafficking Cu ions, metallochaperones also function as buffers to modulate the transcriptional responsiveness and efficacy of Cu efflux. This buffering function of metallochaperones ultimately sets the upper limit for intracellular Cu levels and provides a mechanistic explanation for previously observed Cu metallochaperone mutation phenotypes.

  18. Copper Homeostasis in Mycobacterium tuberculosis

    Science.gov (United States)

    Shi, Xiaoshan; Darwin, K. Heran

    2015-01-01

    Copper (Cu) is a trace element essential for the growth and development of almost all organisms, including bacteria. However, Cu overload in most systems is toxic. Studies show Cu accumulates in macrophage phagosomes infected with bacteria, suggesting Cu provides an innate immune mechanism to combat invading pathogens. To counteract the host-supplied Cu, increasing evidence suggests that bacteria have evolved Cu resistance mechanisms to facilitate their pathogenesis. In particular, Mycobacterium tuberculosis (Mtb), the causative agent of tuberculosis, has evolved multiple pathways to respond to Cu. Here, we summarize what is currently known about Cu homeostasis in Mtb and discuss potential sources of Cu encountered by this and other pathogens in a mammalian host. PMID:25614981

  19. China Metallurgical Group and Jiangxi Copper Having Signed Agreement on Copper Mines with Afghanistan

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>On May 25,the joint investment combo formed by China Metallurgical Group Corp.(MCC) and Jiangxi Copper Co.has formally signed agreement with Afghan government in Kabul on the exploitation of Aynak copper mine.The mine is situated in the north of Loghar in the middle east of Afghanistan,which is about 35km from the Capital City of Kabul.The ex- tra-large copper mine was found at the begin-

  20. Outlook for China’s Copper Rod & Copper Wire Markets-Part Ⅰ

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>Along with its economic development,China is growing in its demand for copper material,and the Chinese copper processing industry has got into the period of rapid expansion.During2001-2009,output of copper material was growing by nearly 20%annually in this country.In 2009,fueled by the national economic stimulus policy,the output hit a high of 22.2%.Since 2009,it has been growing by nearly 12% annually.

  1. The general situation of the production of copper foil for copper clad laminate in China Mainland

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The"Report of Survey & Analysis on copper clad laminate industry in China Mainland"from copper clad laminate branch of China Electronic Material Industrial Association showed that in spite of several unfavorable fac- tors confronted by the whole industry including the large up-rise of raw material price of copper foil,the appreciation of RMB currency,the ad- justment of export policies and the implementa- tion of 2 orders on environmental protection

  2. Calcium isotope analysis by mass spectrometry.

    Science.gov (United States)

    Boulyga, Sergei F

    2010-01-01

    The variations in the isotopic composition of calcium caused by fractionation in heterogeneous systems and by nuclear reactions can provide insight into numerous biological, geological, and cosmic processes, and therefore isotopic analysis finds a wide spectrum of applications in cosmo- and geochemistry, paleoclimatic, nutritional, and biomedical studies. The measurement of calcium isotopic abundances in natural samples has challenged the analysts for more than three decades. Practically all Ca isotopes suffer from significant isobaric interferences, whereas low-abundant isotopes can be particularly affected by neighboring major isotopes. The extent of natural variations of stable isotopes appears to be relatively limited, and highly precise techniques are required to resolve isotopic effects. Isotope fractionation during sample preparation and measurements and instrumental mass bias can significantly exceed small isotope abundance variations in samples, which have to be investigated. Not surprisingly, a TIMS procedure developed by Russell et al. (Russell et al., 1978. Geochim Cosmochim Acta 42: 1075-1090) for Ca isotope measurements was considered as revolutionary for isotopic measurements in general, and that approach is used nowadays (with small modifications) for practically all isotopic systems and with different mass spectrometric techniques. Nevertheless, despite several decades of calcium research and corresponding development of mass spectrometers, the available precision and accuracy is still not always sufficient to achieve the challenging goals. The present article discusses figures of merits of presently used analytical methods and instrumentation, and attempts to critically assess their limitations. In Sections 2 and 3, mass spectrometric methods applied to precise stable isotope analysis and to the determination of (41)Ca are described. Section 4 contains a short summary of selected applications, and includes tracer experiments and the potential use

  3. Metallic copper corrosion rates, moisture content, and growth medium influence survival of copper ion-resistant bacteria

    DEFF Research Database (Denmark)

    Elguindi, J; Moffitt, S; Hasman, Henrik

    2010-01-01

    The rapid killing of various bacteria in contact with metallic copper is thought to be influenced by the influx of copper ions into the cells, but the exact mechanism is not fully understood. This study showed that the kinetics of contact killing of copper surfaces depended greatly on the amount...... of moisture present, copper content of alloys, type of medium used, and type of bacteria. We examined antibiotic- and copper ion-resistant strains of Escherichia coli and Enterococcus faecium isolated from pig farms following the use of copper sulfate as feed supplement. The results showed rapid killing...... of both copper ion-resistant E. coli and E. faecium strains when samples in rich medium were spread in a thin, moist layer on copper alloys with 85% or greater copper content. E. coli strains were rapidly killed under dry conditions, while E. faecium strains were less affected. Electroplated copper...

  4. Functional understanding of the versatile protein copper metabolism MURR1 domain 1 (COMMD1) in copper homeostasis.

    Science.gov (United States)

    Fedoseienko, Alina; Bartuzi, Paulina; van de Sluis, Bart

    2014-05-01

    Copper is an important cofactor in numerous biological processes in all living organisms. However, excessive copper can be extremely toxic, so it is vital that the copper level within a cell is tightly regulated. The damaging effect of copper is seen in several hereditary forms of copper toxicity in humans and animals. At present, Wilson's disease is the best-described and best-studied copper-storage disorder in humans; it is caused by mutations in the ATP7B gene. In dogs, a mutation in the COMMD1 gene has been found to be associated with copper toxicosis. Using a liver-specific Commd1 knockout mouse, the biological role of Commd1 in copper homeostasis has been confirmed. Yet, the exact mechanism by which COMMD1 regulates copper homeostasis is still unknown. Here, we give an overview of the current knowledge and perspectives on the molecular function of COMMD1 in copper homeostasis.

  5. A global Ge isotope budget

    Science.gov (United States)

    Baronas, J. Jotautas; Hammond, Douglas E.; McManus, James; Wheat, C. Geoffrey; Siebert, Christopher

    2017-04-01

    We present measurements of Ge isotope composition and ancillary data for samples of river water, low- and high-temperature hydrothermal fluids, and seawater. The dissolved δ74Ge composition of analyzed rivers ranges from 2.0 to 5.6‰, which is significantly heavier than previously determined values for silicate rocks (δ74Ge = 0.4-0.7‰, Escoube et al., Geostand. Geoanal. Res., 36(2), 2012) from which dissolved Ge is primarily derived. An observed negative correlation between riverine Ge/Si and δ74Ge signatures suggests that the primary δ74Ge fractionation mechanism during rock weathering is the preferential incorporation of light isotopes into secondary weathering products. High temperature (>150 °C) hydrothermal fluids analyzed in this study have δ74Ge of 0.7-1.6‰, most likely fractionated during fluid equilibration with quartz in the reaction zone. Low temperature (25-63 °C) hydrothermal fluids are heavier (δ74Ge between 2.9‰ and 4.1‰) and most likely fractionated during Ge precipitation with hydrothermal clays. Seawater from the open ocean has a δ74Gesw value of 3.2 ± 0.4‰, and is indistinguishable among the different ocean basins at the current level of precision. This value should be regulated over time by the isotopic balance of Ge sources and sinks, and a new compilation of these fluxes is presented, along with their estimated isotopic compositions. Assuming steady-state, non-opal Ge sequestration during sediment authigenesis likely involves isotopic fractionation Δ74Gesolid-solution that is -0.6 ± 1.8‰.

  6. Kinetics and mechanisms of reactions between H2O2 and copper and copper oxides.

    Science.gov (United States)

    Björkbacka, Åsa; Yang, Miao; Gasparrini, Claudia; Leygraf, Christofer; Jonsson, Mats

    2015-09-28

    One of the main challenges for the nuclear power industry today is the disposal of spent nuclear fuel. One of the most developed methods for its long term storage is the Swedish KBS-3 concept where the spent fuel is sealed inside copper canisters and placed 500 meters down in the bedrock. Gamma radiation will penetrate the canisters and be absorbed by groundwater thereby creating oxidative radiolysis products such as hydrogen peroxide (H2O2) and hydroxyl radicals (HO˙). Both H2O2 and HO˙ are able to initiate corrosion of the copper canisters. In this work the kinetics and mechanism of reactions between the stable radiolysis product, H2O2, and copper and copper oxides were studied. Also the dissolution of copper into solution after reaction with H2O2 was monitored by ICP-OES. The experiments show that both H2O2 and HO˙ are present in the systems with copper and copper oxides. Nevertheless, these species do not appear to influence the dissolution of copper to the same extent as observed in recent studies in irradiated systems. This strongly suggests that aqueous radiolysis can only account for a very minor part of the observed radiation induced corrosion of copper.

  7. Speciation and leachability of copper in mine tailings from porphyry copper mining

    DEFF Research Database (Denmark)

    Hansen, Henrik K.; Yianatos, Juan B; Ottosen, Lisbeth M.

    2005-01-01

    Mine tailing from the El Teniente-Codelco copper mine situated in VI Region of Chile was analysed in order to evaluate the mobility and speciation of copper in the solid material. Mine tailing was sampled after the rougher flotation circuits, and the copper content was measured to 1150mgkg^-^1 dry...... matter. This tailing was segmented into fractions of different size intervals: 0-38, 38-45, 45-53, 53-75, 75-106, 106-150, 150-212, and >212@mm, respectively. Copper content determination, sequential chemical extraction, and desorption experiments were carried out for each size interval in order...

  8. Effect of fission neutron irradiation on the tensile and electrical properties of copper and copper alloys

    Energy Technology Data Exchange (ETDEWEB)

    Fabritsiev, S.A. [D.V. Efremov Institute, St. Petersburg (Russian Federation); Zinkle, S.J.; Rowcliffe, A.F. [Oak Ridge National Lab., TN (United States)] [and others

    1995-04-01

    The objective of this study is to evaluate the properties of several copper alloys following fission reactor irradiation at ITER-relevant temperatures of 80 to 200{degrees}C. This study provides some of the data needed for the ITER research and development Task T213. These low temperature irradiations caused significant radiation hardening and a dramatic decrease in the work hardening ability of copper and copper alloys. The uniform elongation was higher at 200{degree}C compared to 100{degree}C, but still remained below 1% for most of the copper alloys.

  9. Effects of stimulation of copper bioleaching on microbial community in vineyard soil and copper mining waste.

    Science.gov (United States)

    Andreazza, Robson; Okeke, Benedict C; Pieniz, Simone; Bortolon, Leandro; Lambais, Márcio R; Camargo, Flávio A O

    2012-04-01

    Long-term copper application in vineyards and copper mining activities cause heavy metal pollution sites. Such sites need remediation to protect soil and water quality. Bioremediation of contaminated areas through bioleaching can help to remove copper ions from the contaminated soils. Thus, the aim of this work was to evaluate the effects of different treatments for copper bioleaching in two diverse copper-contaminated soils (a 40-year-old vineyard and a copper mining waste) and to evaluate the effect on microbial community by applying denaturing gradient gel electrophoresis (DGGE) of 16S ribosomal DNA amplicons and DNA sequence analysis. Several treatments with HCl, H(2)SO(4), and FeSO(4) were evaluated by stimulation of bioleaching of copper in the soils. Treatments and extractions using FeSO(4) and H(2)SO(4) mixture at 30°C displayed more copper leaching than extractions with deionized water at room temperature. Treatment with H(2)SO(4) supported bioleaching of as much as 120 mg kg(-1) of copper from vineyard soil after 115 days of incubation. DGGE analysis of the treatments revealed that some treatments caused greater diversity of microorganisms in the vineyard soil compared to the copper mining waste. Nucleotide Blast of PCR-amplified fragments of 16S rRNA gene bands from DGGE indicated the presence of Rhodobacter sp., Silicibacter sp., Bacillus sp., Paracoccus sp., Pediococcus sp., a Myxococcales, Clostridium sp., Thiomonas sp., a firmicute, Caulobacter vibrioides, Serratia sp., and an actinomycetales in vineyard soil. Contrarily, Sphingomonas was the predominant genus in copper mining waste in most treatments. Paracoccus sp. and Enterobacter sp. were also identified from DGGE bands of the copper mining waste. Paracoccus species is involved in the copper bioleaching by sulfur oxidation system, liberating the copper bounded in the soils and hence promoting copper bioremediation. Results indicate that stimulation of bioleaching with a combination of FeSO(4

  10. Modelling stable water isotopes: Status and perspectives

    Directory of Open Access Journals (Sweden)

    Werner M.

    2010-12-01

    Full Text Available Modelling of stable water isotopes H2 18O and HDO within various parts of the Earth’s hydrological cycle has clearly improved our understanding of the interplay between climatic variations and related isotope fractionation processes. In this article key principles and major research results of stable water isotope modelling studies are described. Emphasis is put on research work using explicit isotope diagnostics within general circulation models as this highly complex model setup bears many resemblances with studies using simpler isotope modelling approaches.

  11. Copper catalysed synthesis of indolylquinazolinone alkaloid bouchardatine

    Indian Academy of Sciences (India)

    Mayavan Viji; Rajagopal Nagarajan

    2014-07-01

    We describe the total synthesis of indolylquinazolinone alkaloid bouchardatine and some of the quinazolinone derivatives. The aerobic oxidation induced by copper(I) bromide, followed by Vilsmeier-Haack formylation gives the natural product bouchardatine alkaloid in good yield.

  12. Diffusion of copper in porous silicon

    Energy Technology Data Exchange (ETDEWEB)

    Andsager, D.; Hetrick, J.M.; Hilliard, J.; Nayfeh, M.H. [Department of Physics, 1110 West Green Street, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States)

    1995-05-01

    We present a study on the nature of diffusion of copper in {ital p}-type porous silicon. The diffusion of evaporated copper in porous silicon and deposition of metal ions in aqueous solution through the porous network was measured by monitoring the metal concentration depth profile as a function of time using Auger electron spectroscopy. We observed that increasing metal penetration from copper evaporated samples correlates with quenching of photoluminescence, in agreement with previous ion quenching results. We extracted a diffusion coefficient from Auger concentration depth profiles which was seven orders of magnitude lower than that expected for diffusion of copper in bulk crystalline Si at room temperature. Deposition of ionic species cannot be characterized as a simple diffusion process. The observed deposition rates were strongly dependent on the solution concentration.

  13. Map and table of world copper smelters

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map and table comprise information on 124 world copper smelters (2 of which are closed and 1 of which is under development) and 4 (low-grade solvent...

  14. Electrodialytic remediation of copper mine tailings

    DEFF Research Database (Denmark)

    Hansen, Henrik K.; Rojo, A.; Ottpsen, Lisbeth M.

    2005-01-01

    Mining activities in Chile have generated large amounts of solid waste, which have been deposited in mine tailing impoundments. These impoundments cause concern to the communities due to dam failures or natural leaching to groundwater and rivers.This work shows the laboratory results of nine...... electrodialytic remediation experiments on copper mine tailings. The results show that electric current could remove copper from watery tailing if the potential gradient was higher than 2V/cm during 21 days. With addition of sulphuric acid, the process was enhanced because the pH decreased to around 4......, and the copper by this reason was released in the solution. Furthermore, with acidic tailing the potential gradient was less than 2V/cm.The maximum copper removal reached in the anode side was 53% with addition of sulphuric acid in 21 days experiment at 20V using approximately 1.8kg mine tailing on dry basis...

  15. Disturbed Copper Bioavailability in Alzheimer's Disease

    Directory of Open Access Journals (Sweden)

    Daniela Kaden

    2011-01-01

    Full Text Available Recent data from in vitro, animal, and human studies have shed new light on the positive roles of copper in many aspects of AD. Copper promotes the non-amyloidogenic processing of APP and thereby lowers the Aβ production in cell culture systems, and it increases lifetime and decreases soluble amyloid production in APP transgenic mice. In a clinical trial with Alzheimer patients, the decline of Aβ levels in CSF, which is a diagnostic marker, is diminished in the verum group (8 mg copper/day, indicating a beneficial effect of the copper treatment. These observations are in line with the benefit of treatment with compounds aimed at normalizing metal levels in the brain, such as PBT2. The data reviewed here demonstrate that there is an apparent disturbance in metal homeostasis in AD. More research is urgently needed to understand how this disturbance can be addressed therapeutically.

  16. Porphyry copper deposits of the world

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Information on porphyry copper deposits from around the world with grade and tonnage models, a general classification based on geologic setting, mineralogy, with...

  17. 21 CFR 524.463 - Copper naphthenate.

    Science.gov (United States)

    2010-04-01

    ... and ponies for thrush caused by organisms susceptible to copper naphthenate. (3) Limitations. Use on horses and ponies only. Avoid contact around eyes. Do not contaminate feed. Do not use in horses...

  18. Ultralow-loss CMOS copper plasmonic waveguides

    DEFF Research Database (Denmark)

    Fedyanin, Dmitry Yu.; Yakubovsky, Dmitry I.; Kirtaev, Roman V.

    2016-01-01

    with microelectronics manufacturing technologies. This prevents plasmonic components from integration with both silicon photonics and silicon microelectronics. Here, we demonstrate ultralow-loss copper plasmonic waveguides fabricated in a simple complementary metal-oxide semiconductor (CMOS) compatible process, which...

  19. Measuring the stability of three copper alloys

    Science.gov (United States)

    Doiron, Theodore D.; Stoup, John R.; Snoots, Patricia; Chaconas, Grace

    1990-11-01

    In this paper we report measurements of the dimensional stability of samples of brass, beryllium copper, and tellurium copper taken over an 18 month time span. Of the materials, brass was the most stable, decreasing slightly in length at the rate of 1 part per million per year (ppm/y) with an uncertainty (3a) of about 1 ppm/y. Tellurium copper shrank at an average rate of 2.Li ppm/y and beryllium copper, the least stable, at the rate of 5.8 ppm/y. To measure the instrumental uncertainty 4 samples of each material were measured, and the measurement scheme was designed to detect and correct for thermal drift ,during measurements. The experiment design problems associated with these measurements and the associated uncertainties are discussed.

  20. Heavy atom isotope effects on enzymatic reactions

    Science.gov (United States)

    Paneth, Piotr

    1994-05-01

    The theory of isotope effects, which has proved to be extremely useful in providing geometrical details of transition states in a variety of chemical reactions, has recently found an application in studies of enzyme-catalyzed reactions. These reactions are multistep in nature with few steps being partially rate-limiting, thus interpretation of these isotope effects is more complex. The theoretical framework of heavy-atom isotope effects on enzymatic reactions is critically analyzed on the basis of recent results of: carbon kinetic isotope effects on carbonic anhydrase and catalytic antibodies; multiple carbon, deuterium isotope effects on reactions catalyzed by formate decarboxylase; oxygen isotope effects on binding processes in reactions catalyzed by pyruvate kinase; and equilibrium oxygen isotope effect on binding an inhibitor to lactate dehydrogenase. The advantages and disadvantages of reaction complexity in learning details of formal and molecular mechanisms are discussed in the examples of reactions catalyzed by phosphoenolpyruvate carboxylase, orotidine decarboxylase and glutamine synthetase.

  1. Measuring SNM Isotopic Distributions using FRAM

    Energy Technology Data Exchange (ETDEWEB)

    Geist, William H. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-02

    The first group of slides provides background information on the isotopic composition of plutonium. It is shown that 240Pu is the critical isotope in neutron coincidence/multiplicity counting. Next, response function analysis to determine isotopic composition is discussed. The isotopic composition can be determined by measuring the net peak counts from each isotope and then taking the ratio of the counts for each isotope relative to the total counts for the element. Then FRAM (Fixed energy Response function Analysis with Multiple efficiencies) is explained. FRAM can control data acquisition, automatically analyze newly acquired data, analyze previously acquired data, provide information on the quality of the analysis, and facilitate analysis in unusual situations (non-standard energy calibrations, gamma rays from non-SNM isotopes, poor spectra (within limits)).

  2. Water requirements of the copper industry

    Science.gov (United States)

    Mussey, Orville Durey

    1961-01-01

    The copper industry in 1955 used about 330 million gallons of water per day in the mining and manufacturing of primary copper. This amount is about 0.3 percent of the total estimated withdrawals of industrial water in the United States in 1955. These facts were determined by a survey, in 1956, of the amount and chemical quality of the water used by the copper industry. A large part of this water was used in Arizona, Nevada, New Mexico, and Utah, where about five-sixths of the domestic copper is mined. Much of the remaining water use was near New York City where most of the electrolytic refineries are located, and the rest of the water was used in widely scattered places. A little more than 100,000 gallons of water per ton of copper was used in the production of copper from domestic ores. Of this amount about 70,000 gallons per ton was used in mining and concentrating the ore, and about 30,000 gallons per ton was used to reduce the concentrate to refined copper. In areas where water was scarce or expensive, the unit water use was a little more than half the average. About 60 mgd (million gallons per day) or 18 percent of the water was used consumptively, and nearly all of the consumptive use occurred in the water-short areas of the West. Of the water used in mining and manufacturing primary copper 75 percent was surface water and 25 percent was ground water, 89 percent of this water was self-supplied by the copper companies and 11 percent came from public supplies. Much of the water used in producing primary copper was of comparatively poor quality; about 46 percent was saline containing 1,000 ppm (parts per million) or more of dissolved solids and 54 percent was fresh. Water that is used for concentration of copper ores by flotation or even any water that comes in contact with the ore at any time before it reaches the flotation plant must be free of petroleum products because they interfere with the flotation process. The water used in mining and ore concentration

  3. Isotope hydrology of catchment basins: lithogenic and cosmogenic isotopic systems

    Energy Technology Data Exchange (ETDEWEB)

    Nimz, G. J., LLNL

    1998-06-01

    A variety of physical processes affect solute concentrations within catchment waters. The isotopic compositions of the solutes can indicate which processes have determined the observed concentrations. These processes together constitute the physical history of the water. Many solutes in natural waters are derived from the interaction between the water and the rock and/or soil within the system - these are termed `lithogenic` solutes. The isotopic compositions of these solutes provide information regarding rock-water interactions. Many other solutes have their isotopic compositions determined both within and outside of the catchment - i.e., in addition to being derived from catchment rock and soil, they are solutes that are also transported into the catchment. Important members of this group include solutes that have isotopic compositions produced by atomic particle interactions with other nuclides. The source of the atomic particles can be cosmic radiation (producing `cosmogenic` nuclides in the atmosphere and land surface), anthropogenic nuclear reactions (producing `thermonuclear` nuclides), or radioactive and fission decay of naturally-occurring elements, principally {sup 238}U (producing `in-situ` lithogenic nuclides in the deep subsurface). Current language usage often combines all of the atomic particle-produced nuclides under the heading `cosmogenic nuclides`, and for simplicity we will often follow that usage here, although always indicating which variety is being discussed. This paper addresses the processes that affect the lithogenic and cosmogenic solute concentrations in catchment waters, and how the isotopic compositions of the solutes can be used in integrative ways to identify these processes, thereby revealing the physical history of the water within a catchment system. The concept of a `system` is important in catchment hydrology. A catchment is the smallest landscape unit that can both participate in all of the aspects of the hydrologic cycle and

  4. Comparative genomic analyses of copper transporters and cuproproteomes reveal evolutionary dynamics of copper utilization and its link to oxygen.

    Directory of Open Access Journals (Sweden)

    Perry G Ridge

    Full Text Available Copper is an essential trace element in many organisms and is utilized in all domains of life. It is often used as a cofactor of redox proteins, but is also a toxic metal ion. Intracellular copper must be carefully handled to prevent the formation of reactive oxygen species which pose a threat to DNA, lipids, and proteins. In this work, we examined patterns of copper utilization in prokaryotes by analyzing the occurrence of copper transporters and copper-containing proteins. Many organisms, including those that lack copper-dependent proteins, had copper exporters, likely to protect against copper ions that inadvertently enter the cell. We found that copper use is widespread among prokaryotes, but also identified several phyla that lack cuproproteins. This is in contrast to the use of other trace elements, such as selenium, which shows more scattered and reduced usage, yet larger selenoproteomes. Copper transporters had different patterns of occurrence than cuproproteins, suggesting that the pathways of copper utilization and copper detoxification are independent of each other. We present evidence that organisms living in oxygen-rich environments utilize copper, whereas the majority of anaerobic organisms do not. In addition, among copper users, cuproproteomes of aerobic organisms were larger than those of anaerobic organisms. Prokaryotic cuproproteomes were small and dominated by a single protein, cytochrome c oxidase. The data are consistent with the idea that proteins evolved to utilize copper following the oxygenation of the Earth.

  5. Microstructure and Service Properties of Copper Alloys

    OpenAIRE

    Polok-Rubiniec M.; Konieczny J.; Labisz K.; Włodarczyk-Fligier A.

    2016-01-01

    This elaboration shows the effect of combined heat treatment and cold working on the structure and utility properties of alloyed copper. As the test material, alloyed copper CuTi4 was employed. The samples were subjected to treatment according to the following schema: 1st variant – supersaturation and ageing, 2nd variant – supersaturation, cold rolling and ageing. The paper presents the results of microstructure, hardness, and abrasion resistance. The analysis of the wipe profile geometry was...

  6. Electrodialytic Remediation of Copper Mine Tailings

    DEFF Research Database (Denmark)

    Hansen, H.K.; Rojo, A.; Ottosen, L.M.

    2012-01-01

    This work compares and evaluates sixteen electrodialytic laboratory remediation experiments on copper mine tailings. Different parameters were analysed, such as remediation time, addition of desorbing agents, and the use of pulsed electrical fields.......This work compares and evaluates sixteen electrodialytic laboratory remediation experiments on copper mine tailings. Different parameters were analysed, such as remediation time, addition of desorbing agents, and the use of pulsed electrical fields....

  7. Pharmacological Properties of Nanometals (Silver, Copper, Iron

    Directory of Open Access Journals (Sweden)

    Chekman, I.S.

    2015-01-01

    Full Text Available The article summarizes the results of studies on the pharmacological, toxicological and specific properties of nanometals (silver, iron, copper. It is established that nanoparticles of silver, copper, iron exhibit antimicrobial action. Acute toxicity of nanometals depends on their nature, administration route and animal sex. Effects on heart activity and hemodynamic status as well as erythrocyte osmotic fragility have dose-dependent nature.

  8. EXPERIMENTAL STUDY OF THERMODYNAMICS OF LOADED COPPER

    OpenAIRE

    Barannikov, V.; Nikolaeva, E; Kasatkina, S.

    2005-01-01

    This paper presents an experimental technique to investigate the dynamic behavior of copper under compression using the split Hopkinson pressure bar. We propose to measure thermophysical characteristics of copper specimens with the use of a classic adiabatic calorimeter. The measurements of heat energy, microand macrohardness and density of deformed specimens are made. The obtained results indicate that the evolution of the material structure plays a leading role in the dynamic process of pla...

  9. The Influence of Copper on Steel

    Science.gov (United States)

    1917-02-07

    quenching in oil instead of water. He con- cludes that the presence of copper need not cause apprehension, although tere may not be any advantage in its...present work of .r. Breuil, to be h- zein de- scribed, re 2 resents on; of the most extended investigations on the zffect of copper on the properties...Clevenger and Ray, which will now be described. Experimantal. MAKING INGOTS. 𔄂mall, circular, oil fired fuinace used, (using IoA pressure burner), to heat

  10. Atomistic simulations of dislocation processes in copper

    DEFF Research Database (Denmark)

    Vegge, T.; Jacobsen, K.W.

    2002-01-01

    We discuss atomistic simulations of dislocation processes in copper based on effective medium theory interatomic potentials. Results on screw dislocation structures and processes are reviewed with particular focus on point defect mobilities and processes involving cross slip. For example, the sta......We discuss atomistic simulations of dislocation processes in copper based on effective medium theory interatomic potentials. Results on screw dislocation structures and processes are reviewed with particular focus on point defect mobilities and processes involving cross slip. For example...

  11. China Resumes Processing Trade of Copper Concentrate

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>On December 31,2008,China’s Ministry of Commerce and General Administration of Cus- toms issued its year-2008 No.121 announce- ment,saying it will adjust the forbidden cate- gory of processing trade,which includes non- ferrous metal products such as copper concen- trate,nickel concentrate,cobalt concentrate, refined copper,nickel and nickel alloy.The above products will be exempt from being for- bidden to process starting from Feb.1,2009.

  12. Interactions of catechins with copper ions

    OpenAIRE

    Řihošková, Petra

    2014-01-01

    Charles University in Prague Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical botanic and ecology Candidate: Mgr. Petra Řihošková Supervisor: PharmDr. Jana Karlíčková, Ph.D. Title of Thesis: Interactions of catechins with copper ions Keywords: catechins, chelating activity, copper, bathocuproine, hematoxylin, antioxidants Flavonoids are a class of plant polyphenols with significant antioxidant activity, which positively affects human health. Flavonoids are able to chelate me...

  13. Bonding and structure of copper nitrenes.

    Science.gov (United States)

    Cundari, Thomas R; Dinescu, Adriana; Kazi, Abul B

    2008-11-03

    Copper nitrenes are of interest as intermediates in the catalytic aziridination of olefins and the amination of C-H bonds. However, despite advances in the isolation and study of late-transition-metal multiply bonded complexes, a bona fide structurally characterized example of a terminal copper nitrene has, to our knowledge, not been reported. In anticipation of such a report, terminal copper nitrenes are studied from a computational perspective. The nitrene complexes studied here are of the form (beta-diketiminate)Cu(NPh). Density functional theory (DFT), complete active space self-consistent-field (CASSCF) electronic structure techniques, and hybrid quantum mechanical/molecular mechanical (QM/MM) methods are employed to study such species. While DFT methods indicate that a triplet (S = 1) is the ground state, CASSCF calculations indicate that a singlet (S = 0) is the ground state, with only a small energy gap between the singlet and triplet. Moreover, the ground-state (open-shell) singlet copper nitrene is found to be highly multiconfigurational (i.e., biradical) and to possess a bent geometry about the nitrene nitrogen, contrasting with the linear nitrene geometry of the triplet copper nitrenes. CASSCF calculations also reveal the existence of a closed-shell singlet state with some degree of multiple bonding character for the copper-nitrene bond.

  14. Bitrex: A new levelling agent for copper

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, J.F.K., E-mail: J.F.K.Cooper@gmail.com [Department of Physics, Cavendish Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE (United Kingdom); Barnes, C.H.W. [Department of Physics, Cavendish Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE (United Kingdom)

    2011-10-30

    Highlights: > Bitrex is a new levelling agent for copper. > The addition of Bitrex increases corrosion resistance of copper films. > The nature of pure copper electrodeposits depends on the growth template size. > Bitrex increases coppers current efficiency. - Abstract: We investigate the effects of denatonium benzoate (Bitrex) on the electrodeposition of copper films from a boric acid bath using scanning electron microscopy, cyclic voltammetry, electrochemical quartz microbalance (EQCM) measurements and corrosion studies. In the absence of Bitrex, pure copper films grown by this method are optically black owing to the appearance of complex surface nanostructures. The addition of Bitrex acts as a levelling agent preventing the formation of these nanostructures even for concentrations as low as 0.02 mM producing a lustrous film with low surface roughness. Bitrex is also found to improve the corrosion resistance by up to a factor of 20 and increase the current efficiency by over a factor of two. Bitrex is hypothesised to act directly on the cathode, partially inhibiting the growth or lowering the deposition current.

  15. Material characterization of ancient Indian copper

    Indian Academy of Sciences (India)

    A Srivastava; R Balasubramaniam

    2003-10-01

    A chalcolithic (2350–1800 BC) copper chisel from Balathal has been characterized by X-ray diffraction, microstructural and electrochemical methods. The surface patina was composed of sulfates and oxysulfates in the outer layers while the inner layers were rich in copper oxides. The chisel exhibited smaller grain sizes near two of the surfaces while the structure in the interior was equiaxed. The deformed grains and inclusions near the surfaces and variation in the microhardness of the sample from different faces proved that the copper chisel was processed by cold deformation after initial casting of the square cross-section chisel. The electrochemical behaviour of chalcolithic Cu has been compared with that of a modern Cu sample by potentiodynamic polarization studies. The corrosion rate of chalcolithic Cu in aerated 3.5% NaCl solution was only marginally higher than that of modern Cu. The higher rate of corrosion has been attributed to the presence of second phase sulfide inclusions. The excellent condition of preservation of the 3800-year-old copper object, with no indications of stress corrosion cracking, suggests that pure copper or copper-based materials can be seriously considered as candidate canister materials for long-term underground storage of nuclear wastes in underground repositories.

  16. Lead isotopic compositions of common arsenical pesticides used in New England

    Science.gov (United States)

    Ayuso, Robert; Foley, Nora; Robinson, Gilpin; Wandless, Gregory; Dillingham, Jeremy

    2004-01-01

    The three most important arsenical pesticides and herbicides that were extensively used on apple, blueberry, and potato crops in New England from mid-1800s to recent times are lead arsenate, calcium arsenate, and sodium arsenate. Lead arsenate was probably the most heavily used of the arsenical pesticides until it was banned in 1988. Other metal-arsenic pesticides were also used but in lesser amounts. A recent report identified areas in New England where arsenical pesticides were used extensively (Robinson and Ayuso, 2004). On the basis of factor analysis of metal concentrations in stream sediment samples, a positive correlation with pesticide use was shown in regions having stream sediment sample populations that contained concentrations of high arsenic and lead. Lead isotope compositions of stream sediments from areas with heavy use of the pesticides could not be entirely explained by lead originating from rock sulfides and their weathering products. An industrial lead contribution (mostly from atmospheric deposition of lead) was suggested in general to explain the lead isotopic distributions of the stream sediments that could not be accounted for by the natural lead in the environment. We concluded that when agricultural land previously contaminated with arsenical pesticides is urbanized, pesticide residues in the soils and stream sediments could be released into the groundwater. No lead isotopic data characterizing the compositions of pesticides were available for comparison. We have determined the lead isotopic compositions of commonly used pesticides in New England, such as lead arsenate, sodium metaarsenite, and calcium arsenate, in order to assist in future isotopic comparisons and to better establish anthropogenic sources of Pb and As. New data are also presented for copper acetoarsenite (or Paris green), methyl arsonic acid and methane arsonic acid, as well as for arsanilic acid, all of which are used as feed additives to promote swine and poultry growth

  17. Electrochemical Synthesis and Structural Characterization of a Novel Mixed-valence Copper (I)-copper (II) Complex: {[Bis(ethylenediamine) Copper (II)] Bis[diiodocuprate (I)]}

    OpenAIRE

    Mahboobeh Dashti Ardakani; Majid M. Heravi; Saeed Dehghanpour; Lida Fotouhi

    2007-01-01

    A novel, mixed-valent copper(I)-copper(II) complex, {[bis(ethylene-diamine)copper(II)] bis[diiodocuprate(I)]} (1), has been prepared by electrochemicaldissolution of a sacrificial copper anode in a solution of ethylenediamine (en), I2 andtetraethylammoniumperchlorate (TEAP) as supporting electrolyte in acetonitrile (AcN)and characterized by single-crystal X-ray structure determination. The crystal structure ofthe complex 1 shows that it consists of a CuI2 polymer formed from I- ligands bridgi...

  18. Copper-resistant bacteria enhance plant growth and copper phytoextraction.

    Science.gov (United States)

    Yang, Renxiu; Luo, Chunling; Chen, Yahua; Wang, Guiping; Xu, Yue; Shen, Zhenguo

    2013-01-01

    In this study, we investigated the role of rhizospheric bacteria in solubilizing soil copper (Cu) and promoting plant growth. The Cu-resistant bacterium DGS6 was isolated from a natural Cu-contaminated soil and was identified as Pseudomonas sp. DGS6. This isolate solubilized Cu in Cu-contaminated soil and stimulated root elongation of maize and sunflower. Maize was more sensitive to inoculation with DGS6 than was sunflower and exhibited greater root elongation. In pot experiment, inoculation with DGS6 increased the shoot dry weight of maize by 49% and sunflower by 34%, and increased the root dry weight of maize by 85% and sunflower by 45%. Although the concentrations of Cu in inoculated and non-inoculated seedlings did not differ significantly, the total accumulation of Cu in the plants increased after inoculation. DGS6 showed a high ability to solubilize P and produce iron-chelating siderophores, as well as significantly improved the accumulation of P and Fe in both maize and sunflower shoots. In addition, DGS6 produced indole-3-acetic acid (IAA) and ACC deaminase, which suggests that it may modulate ethylene levels in plants. The bacterial strain DGS6 could be a good candidate for re-vegetation of Cu-contaminated sites. Supplemental materials are available for this article. Go to the publisher's online edition of International Journal of Phytoremediation to view the supplemental file.

  19. Synthesis of the copper chelator TGTA and evaluation of its ability to protect biomolecules from copper induced degradation during copper catalyzed azide-alkyne bioconjugation reactions.

    Science.gov (United States)

    Ekholm, F S; Pynnönen, H; Vilkman, A; Koponen, J; Helin, J; Satomaa, T

    2016-01-21

    One of the most successful bioconjugation strategies to date is the copper(I)-catalyzed cycloaddition reaction (CuAAC), however, the typically applied reaction conditions have been found to degrade sensitive biomolecules. Herein, we present a water soluble copper chelator which can be utilized to protect biomolecules from copper induced degradation.

  20. Use of Lead Isotopes to Identify Sources of Metal and Metalloid Contaminants in Atmospheric Aerosol from Mining Operations

    Science.gov (United States)

    Félix, Omar I.; Csavina, Janae; Field, Jason; Rine, Kyle P.; Sáez, A. Eduardo; Betterton, Eric A.

    2014-01-01

    Mining operations are a potential source of metal and metalloid contamination by atmospheric particulate generated from smelting activities, as well as from erosion of mine tailings. In this work, we show how lead isotopes can be used for source apportionment of metal and metalloid contaminants from the site of an active copper mine. Analysis of atmospheric aerosol shows two distinct isotopic signatures: one prevalent in fine particles (< 1 μm aerodynamic diameter) while the other corresponds to coarse particles as well as particles in all size ranges from a nearby urban environment. The lead isotopic ratios found in the fine particles are equal to those of the mine that provides the ore to the smelter. Topsoil samples at the mining site show concentrations of Pb and As decreasing with distance from the smelter. Isotopic ratios for the sample closest to the smelter (650 m) and from topsoil at all sample locations, extending to more than 1 km from the smelter, were similar to those found in fine particles in atmospheric dust. The results validate the use of lead isotope signatures for source apportionment of metal and metalloid contaminants transported by atmospheric particulate. PMID:25496740

  1. Authenticity of Benin metalworks evaluated by inductively coupled plasma mass spectrometry and lead isotope analyses

    Science.gov (United States)

    Fabbri, E.; Soffritti, C.; Merlin, M.; Vaccaro, C.; Garagnani, G. L.

    2017-05-01

    Two metal plaques and a cock statuette belonging to a private collection and stylistically consistent with the Royal Art of Benin (Nigeria) were investigated in order to verify their authenticity. The characterization of alloys and patinas were carried out by inductively coupled plasma mass spectrometry, optical microscopy, scanning electron microscopy and energy dispersion spectroscopy, and X-Ray diffraction spectrometry. Furthermore, thermal ionization mass spectrometry was used to assess the abundances of lead isotopes and to attempt a dating by the measurement of 210Pb/204Pb ratio. The results showed that all three artefacts were mainly composed of low lead-brass alloys, with relatively high concentrations of zinc, antimony, cadmium and aluminum in the solid copper solution. Microstructures were mostly dendritic, typical of as-cast brasses, and characterized by recrystallized non-homogeneous twinned grains in areas corresponding to surface decorations, probably due to multiple hammering steps followed by partial annealing treatments. The matrix was composed of a cored α-Cu solid solution together with non-metallic inclusions, lead globules and Sn-rich precipitates in interdendritic spaces. On the surface of all metalworks, both copper and zinc oxides, a non-continuous layer of sulphur-containing contaminants and chloride-containing compounds, were identified. The lead isotope results were consistent with brasses produced shortly before or after 1900 CE. Overall, the data obtained by different techniques supported the hypothesis that the three artefacts were not authentic.

  2. Natural fractionation of uranium isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Noordmann, Janine

    2015-01-24

    The topic of this thesis was the investigation of U (n({sup 238}U) / n({sup 235}U)) isotope variations in nature with a focus on samples (1) that represent the continental crust and its weathering products (i.e. granites, shales and river water) (2) that represent products of hydrothermal alteration on mid-ocean ridges (i.e. altered basalts, carbonate veins and hydrothermal water) and (3) from restricted euxinic basins (i.e. from the water column and respective sediments). The overall goal was to explore the environmental conditions and unravel the mechanisms that fractionate the two most abundant U isotopes, n({sup 238}U) and n({sup 235}U), on Earth.

  3. Lasers utilizing CO2 isotopes

    Science.gov (United States)

    Pechenin, Iu. V.; Domanov, M. S.

    1980-08-01

    The emission spectra and power characteristics of CW (C-12)(O-16)2, (C-13)(O-16)2, (C-12)(O-16)(O-18)2 and (C-12)(O-18) lasers are investigated. Laser output power is found to depend equally on the proportion of carbon and oxygen isotopes in the active medium for all isotopes except the asymmetrical (C-12)(O-16)(O-18), in which maximum output power is four to five times less due to the doubling of emission lines and limited enrichment caused by recombination into (C-12)(O-16)2 and (C-12)(O-18)2 molecules during discharge. The unsaturated gain is observed to increase linearly with enrichment, with that of nonsymmetrical molecules half that of the symmetrical molecules, while the maximum power output is independent of enrichment.

  4. Interstellar Isotopes: Prospects with ALMA

    Science.gov (United States)

    Charnley Steven B.

    2010-01-01

    Cold molecular clouds are natural environments for the enrichment of interstellar molecules in the heavy isotopes of H, C, N and O. Anomalously fractionated isotopic material is found in many primitive Solar System objects, such as meteorites and comets, that may trace interstellar matter that was incorporated into the Solar Nebula without undergoing significant processing. Models of the fractionation chemistry of H, C, N and O in dense molecular clouds, particularly in cores where substantial freeze-out of molecules on to dust has occurred, make several predictions that can be tested in the near future by molecular line observations. The range of fractionation ratios expected in different interstellar molecules will be discussed and the capabilities of ALMA for testing these models (e.g. in observing doubly-substituted isotopologues) will be outlined.

  5. Copper Recycling in the United States in 2004

    Science.gov (United States)

    Goonan, Thomas G.

    2009-01-01

    As one of a series of reports that describe the recycling of metal commodities in the United States, this report discusses the flow of copper from production through distribution and use, with particular emphasis on the recycling of industrial scrap (new scrap1) and used products (old scrap) in the year 2004. This materials flow study includes a description of copper supply and demand for the United States to illustrate the extent of copper recycling and to identify recycling trends. Understanding how materials flow from a source through disposition can aid in improving the management of natural resource delivery systems. In 2004, the U.S. refined copper supply was 2.53 million metric tons (Mt) of refined unalloyed copper. With adjustment for refined copper exports of 127,000 metric tons (t) of copper, the net U.S. refined copper supply was 2.14 Mt of copper. With this net supply and a consumer inventory decrease of 9,000 t of refined copper, 2.42 Mt of refined copper was consumed by U.S. semifabricators (brass mills, wire rod mills, ingot makers, and foundries and others) in 2004. In addition to the 2.42 Mt of refined copper consumed in 2004, U.S. copper semifabricators consumed 853,000 t of copper contained in recycled scrap. Furthermore, 61,000 t of copper contained in scrap was consumed by noncopper alloy makers, for example, steelmakers and aluminum alloy makers. Old scrap recycling efficiency for copper was estimated to be 43 percent of theoretical old scrap supply, the recycling rate for copper was 30 percent of apparent supply, and the new-scrap-to-old-scrap ratio for U.S. copper product production was 3.2 (76:24).

  6. Copper toxicity in a New Zealand dairy herd.

    Science.gov (United States)

    Johnston, Howard; Beasley, Laura; MacPherson, Neil

    2014-01-01

    Chronic copper toxicity was diagnosed in a Jersey herd in the Waikato region of New Zealand following an investigation into the deaths of six cattle from a herd of 250 dry cows. Clinical signs and post-mortem examination results were consistent with a hepatopathy, and high concentrations of copper in liver and blood samples of clinically affected animals confirmed copper toxicity. Liver copper concentrations and serum gamma-glutamyl transferase activities were both raised in a group of healthy animals sampled at random from the affected herd, indicating an ongoing risk to the remaining cattle; these animals all had serum copper concentrations within normal limits. Serum samples and liver biopsies were also collected and assayed for copper from animals within two other dairy herds on the same farm; combined results from all three herds showed poor correlation between serum and liver copper concentrations. To reduce liver copper concentrations the affected herd was drenched with 0.5 g ammonium molybdate and 1 g sodium sulphate per cow for five days, and the herd was given no supplementary feed or mineral supplements. Liver biopsies were repeated 44 days after the initial biopsies (approximately 1 month after the end of the drenching program); these showed a significant 37.3% decrease in liver copper concentrations (P record keeping, but multiple sources of copper contributed to a long term copper over supplementation of the herd; the biggest source of copper was a mineral supplement. The farmer perceived this herd to have problems with copper deficiency prior to the diagnosis of copper toxicity, so this case demonstrates the importance of monitoring herd copper status regularly. Also the poor correlation between liver and serum copper concentrations in the three herds sampled demonstrates the importance of using liver copper concentration to assess herd copper status.

  7. Isotopic and fluid-inclusion constraints on the formation of polymetallic vein deposits in the central Argentinian Patagonia

    Science.gov (United States)

    Dejonghe, Léon; Darras, Benoît; Hughes, Guillermo; Muchez, Philippe; Scoates, James S.; Weis, Dominique

    2002-03-01

    The lead isotope compositions of galena and the fluid-inclusion systematics of nine barite-bearing polymetallic (Au, Ag, Pb, Zn) deposits of the central Argentinian Patagonia (Chubut and Rio Negro provinces) have been investigated to constrain the compositions and sources of the mineralizing fluids. Most of the deposits occur as veins, with less common wall-rock disseminations and/or stockworks, and are low-sulfidation epithermal deposits hosted in Jurassic volcanic rocks. Fluid-inclusion homogenization temperatures (Th) from quartz and sphalerite from the deposits fall within the range of 100-300 °C, with the highest measured average temperatures for the most eastern deposits (Mina Angela - 298 °C; Cañadón Bagual - 343 °C). The salinities of the hydrothermal fluids at all deposits were low to moderate (≤10.4 equiv. wt% NaCl). Three groups of ore deposits can be defined on the basis of 206Pb/204Pb ratios for galena and these show a general decrease from west to east (from 18.506 to 18.000). The central Argentinian Patagonia deposits have distinctly less radiogenic lead isotope compositions than similar deposits from Peru and Chile, except for the porphyry copper deposits of central and southern Peru. Galena from the Mina Angela deposit is characterized by very low radiogenic lead isotope compositions (18.000Precambrian basement. The geographic trend in lead isotope compositions of both galena and whole rocks indicates a crustal contribution which increases eastwards, also reflected in the strontium-neodymium isotope systematics of the host lavas. Finally, due to the lack of precise age determinations for the central Patagonian polymetallic deposits, a potential link with Andean porphyry copper systems remains an open question.

  8. Speciation and leachability of copper in mine tailings from porphyry copper mining: influence of particle size.

    Science.gov (United States)

    Hansen, Henrik K; Yianatos, Juan B; Ottosen, Lisbeth M

    2005-09-01

    Mine tailing from the El Teniente-Codelco copper mine situated in VI Region of Chile was analysed in order to evaluate the mobility and speciation of copper in the solid material. Mine tailing was sampled after the rougher flotation circuits, and the copper content was measured to 1150 mg kg (-1) dry matter. This tailing was segmented into fractions of different size intervals: 0-38, 38-45, 45-53, 53-75, 75-106, 106-150, 150-212, and >212 microm, respectively. Copper content determination, sequential chemical extraction, and desorption experiments were carried out for each size interval in order to evaluate the speciation of copper. It was found that the particles of smallest size contained 50-60% weak acid leachable copper, whereas only 32% of the copper found in largest particles could be leached in weak acid. Copper oxides and carbonates were the dominating species in the smaller particles, and the larger particles contained considerable amounts of sulphides.

  9. Sulfidation treatment of copper-containing plating sludge towards copper resource recovery.

    Science.gov (United States)

    Kuchar, D; Fukuta, T; Onyango, M S; Matsuda, H

    2006-11-02

    The present study is concerned with the sulfidation treatment of copper-containing plating sludge towards copper resource recovery by flotation of copper sulfide from treated sludge. The sulfidation treatment was carried out by contacting simulated or real copper plating sludge with Na(2)S solution for a period of 5 min to 24 h. The initial molar ratio of S(2-) to Cu(2+) (S(2-) to Me(2+) in the case of real sludge) was adjusted to 1.00, 1.25 or 1.50, while the solid to liquid ratio was set at 1:50. As a result, it was found that copper compounds were converted to various copper sulfides within the first 5 min. In the case of simulated copper sludge, CuS was identified as the main sulfidation product at the molar ratio of S(2-) to Cu(2+) of 1.00, while Cu(7)S(4) (Roxbyite) was mainly found at the molar ratios of S(2-) to Cu(2+) of 1.50 and 1.25. Based on the measurements of oxidation-reduction potential, the formation of either CuS or Cu(7)S(4) at different S(2-) to Cu(2+) molar ratios was attributed to the changes in the oxidation-reduction potential. By contrast, in the case of sulfidation treatment of real copper sludge, CuS was predominantly formed, irrespective of S(2-) to Me(2+) molar ratio.

  10. Tianyi Copper Corporation Copper Belt Project Expected to Start in June

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>The copper belt project initiated by Zhongshan Tianyi Copper Corporation is now under construction. Construction of plant is nearing completion and the installation of equipment will soon begin.According to the schedule,the project is expected to begin operation in June, and the output is expected to reach 30,000 tons by end of year.

  11. Jiangrun Copper Planning for Copper Rod Production of 240,000 tons

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>According to Jiangsu Jiangrun Copper Co Ltd, it is planning to achieve 240,000 tons of 8mm copper rod production this year due to brisk demand from the lower reaches and the gradual release of its SCR line capacity.

  12. GD Copper Puts New Copper Tube Production Lines in Handan into Operation

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>Recently a foundation stone laying ceremony was held in Handan for the Jinxiang Project on Precise Copper Tube for Air-conditioners and Refrigerators. The project was invested by Golden Dragon Precise Copper Tube Group Inc. of Henan Province.

  13. Joint Exploitation of Copper Mine Resources in Liangshan by Jiangxi Copper and Sichuan

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>Recently,Sichuan Institute of Metallurgical Geology & Exploration signed a strategic agreement of cooperation with Jiangxi Copper Group.The two parties will play an active roles in the joint prospecting and exploitation of mine resources in Liangshan,the copper mine

  14. Copper does not alter the intracellular distribution of ATP7B, a copper-transporting ATPase.

    Science.gov (United States)

    Harada, M; Sakisaka, S; Kawaguchi, T; Kimura, R; Taniguchi, E; Koga, H; Hanada, S; Baba, S; Furuta, K; Kumashiro, R; Sugiyama, T; Sata, M

    2000-09-01

    Wilson's disease is a genetic disorder characterized by the accumulation of copper in the body due to a defect of biliary copper excretion. However, the mechanism of biliary copper excretion has not been fully clarified. We examined the effect of copper on the intracellular localization of the Wilson disease gene product (ATP7B) and green fluorescent protein (GFP)-tagged ATP7B in a human hepatoma cell line (Huh7). The intracellular organelles were visualized by fluorescence microscopy. GFP-ATP7B colocalized with late endosome markers, but not with endoplasmic reticulum, Golgi, or lysosome markers in both the steady and copper-loaded states. ATP7B mainly localized at the perinuclear regions in both states. These results suggest that the main localization of ATP7B is in the late endosomes in both the steady and copper-loaded states. ATP7B seems to translocate copper from the cytosol to the late endosomal lumen, thus participating in biliary copper excretion via lysosomes.

  15. Comparative isotope ecology of African great apes.

    Science.gov (United States)

    Oelze, Vicky M; Fahy, Geraldine; Hohmann, Gottfried; Robbins, Martha M; Leinert, Vera; Lee, Kevin; Eshuis, Henk; Seiler, Nicole; Wessling, Erin G; Head, Josephine; Boesch, Christophe; Kühl, Hjalmar S

    2016-12-01

    The isotope ecology of great apes is a useful reference for palaeodietary reconstructions in fossil hominins. As extant apes live in C3-dominated habitats, variation in isotope signatures is assumed to be low compared to hominoids exploiting C4-plant resources. However, isotopic differences between sites and between and within individuals are poorly understood due to the lack of vegetation baseline data. In this comparative study, we included all species of free-ranging African great apes (Pan troglodytes, Pan paniscus, Gorilla sp.). First, we explore differences in isotope baselines across different habitats and whether isotopic signatures in apes can be related to feeding niches (faunivory and folivory). Secondly, we illustrate how stable isotopic variations within African ape populations compare to other extant and extinct primates and discuss possible implications for dietary flexibility. Using 701 carbon and nitrogen isotope data points resulting from 148 sectioned hair samples and an additional collection of 189 fruit samples, we compare six different great ape sites. We investigate the relationship between vegetation baselines and climatic variables, and subsequently correct great ape isotope data to a standardized plant baseline from the respective sites. We obtained temporal isotopic profiles of individual animals by sectioning hair along its growth trajectory. Isotopic signatures of great apes differed between sites, mainly as vegetation isotope baselines were correlated with site-specific climatic conditions. We show that controlling for plant isotopic characteristics at a given site is essential for faunal data interpretation. While accounting for plant baseline effects, we found distinct isotopic profiles for each great ape population. Based on evidence from habituated groups and sympatric great ape species, these differences could possibly be related to faunivory and folivory. Dietary flexibility in apes varied, but temporal variation was overall

  16. Activation Products from Copper and Steel Samples Exposed to Showers Produced by 8 GeV Protons Lost in the Fermilab Main Injector Collimation System

    CERN Document Server

    Brown, Bruce C; Pronskikh, Vitaly S

    2015-01-01

    In conjunction with efforts to predict residual radiation levels in the Fermilab Main Injector, measurements of residual radiation were correlated with the time history of losses. Detailed examination suggested that the list of radioactive isotopes used for fitting was incomplete. We will report on activation studies of magnet steel and copper samples which we irradiated adjacent to the Fermilab Main Injector collimation system. Our results identified several additional radioactive isotopes of interest. The MARS15 studies using a simplified model are compared with measurements. The long half-life isotopes will grow in importance as operation stretches to a second decade and as loss rates rise. These studies allow us to predict limits on these concerns.

  17. Copper-2 Ingestion, Plus Increased Meat Eating Leading to Increased Copper Absorption, Are Major Factors Behind the Current Epidemic of Alzheimer's Disease.

    Science.gov (United States)

    Brewer, George J

    2015-12-02

    It has become clear that copper toxicity is playing a major role in Alzheimer's disease; but why is the brain copper toxicity with cognition loss in Alzheimer's disease so much different clinically than brain copper toxicity in Wilson's disease, which results in a movement disorder? Furthermore, why is the inorganic copper of supplement pills and in drinking water so much more damaging to cognition than the organic copper in food? A recent paper, which shows that almost all food copper is copper-1, that is the copper-2 of foods reverts to the reduced copper-1 form at death or harvest, gives new insight into these questions. The body has an intestinal transport system for copper-1, Ctr1, which channels copper-1 through the liver and into safe channels. Ctr1 cannot absorb copper-2, and some copper-2 bypasses the liver, ends up in the blood quickly, and is toxic to cognition. Humans evolved to handle copper-1 safely, but not copper-2. Alzheimer's is at least in part, a copper-2 toxicity disease, while Wilson's is a general copper overload disease. In this review, we will show that the epidemiology of the Alzheimer's epidemic occurring in developed, but not undeveloped countries, fits with the epidemiology of exposure to copper-2 ingestion leached from copper plumbing and from copper supplement pill ingestion. Increased meat eating in developed countries is also a factor, because it increases copper absorption, and thus over all copper exposure.

  18. The Amyloid Precursor Protein of Alzheimer's Disease in the Reduction of Copper(II) to Copper(I)

    Science.gov (United States)

    Multhaup, Gerd; Schlicksupp, Andrea; Hesse, Lars; Beher, Dirk; Ruppert, Thomas; Masters, Colin L.; Beyreuther, Konrad

    1996-03-01

    The transition metal ion copper(II) has a critical role in chronic neurologic diseases. The amyloid precursor protein (APP) of Alzheimer's disease or a synthetic peptide representing its copper-binding site reduced bound copper(II) to copper(I). This copper ion-mediated redox reaction led to disulfide bond formation in APP, which indicated that free sulfhydryl groups of APP were involved. Neither superoxide nor hydrogen peroxide had an effect on the kinetics of copper(II) reduction. The reduction of copper(II) to copper(I) by APP involves an electron-transfer reaction and could enhance the production of hydroxyl radicals, which could then attack nearby sites. Thus, copper-mediated toxicity may contribute to neurodegeneration in Alzheimer's disease.

  19. Geological Characteristics of Copper Mineralization,Jiujiang—Ruichang Area,Jiangxi Province,China

    Institute of Scientific and Technical Information of China (English)

    邱小平; 裴荣富; 等

    1989-01-01

    The Jiujiang-Ruichang area in northwestern Jiangxi extends along the western part of the minerogenic belt of the middle-lower Yangtze Valley in a terrain of sediments ranging from Ordovician to Triassic in age with NEE-folda,and NW-compressive,NNW-tensile and NEE-compressive-shearing faults as the major structures .Igneous rocks are mostly intermediate-acid epizonal intrusive bodies.Typical copper mineralizations in this area include the skarn-type and stratiform Cu-bearing pyrite-type deposits at Wushan and the porphyry and breccia-pipe type copper-molybdenum deposits at Chengmenshan.Silurian strata,with a great thickness and an average copper content of 51 ppm,are considered to be the source bed of copper mineralization,as is evidenced,among other things,by the presence of an envelope which is notably impoverished in Cu aroud most of the deposits.Magmatic rocks which intruded into the Silurian strata often have relatively high alkali contents and K2O/Na2O ratios ,with extensive potash alteration.Magmatic rocks in the area are of co-melting type or mixed type.The magma assimilated a large quanity of country rocks while ascending.They are characterized by high REE contents,absence of Eu anomalies and high LREE/HREE ratios.Ancient lead and strontium isotopes were detected in feldspar megaphenocrysts from the granodiorite porphyry.Hydrothermal convective circulation systems of magmatic water of magmatic water and supergenic water was extensively developed in the magmatic and country rocks,in which copper,potassium and other ore-forming components were extracted from the country rocks and concentrated through heating,boiling and evaporating.When the ore-forming fluids found their way into the skarn zone or the unconformity between the Wutong Formation and the Huanglong Formation,ore precipitation would have occurred as a result of changing media,If the concentration of KCl exceeded 9%,copper and other ore-forming components might have been deposited in magmatic rocks

  20. Copper intoxication inhibits aerobic nucleotide synthesis in Streptococcus pneumoniae

    Science.gov (United States)

    Johnson, Michael D. L.; Kehl-Fie, Thomas E.; Rosch, Jason W.

    2015-01-01

    Copper is universally toxic in excess, a feature exploited by the human immune system to facilitate bacterial clearance. The mechanism of copper intoxication remains unknown for many bacterial species. Here, we demonstrate that copper toxicity in Streptococcus pneumoniae is independent from oxidative stress but, rather, is the result of copper inhibiting the aerobic dNTP biosynthetic pathway. Furthermore, we show that copper-intoxicated S. pneumoniae is rescued by manganese, which is an essential metal in the aerobic nucleotide synthesis pathway. These data provide insight into new targets to enhance copper-mediated toxicity during bacterial clearance. PMID:25730343