Model comparisons and genetic and environmental parameter ...

African Journals Online (AJOL)

arc

Model comparisons and genetic and environmental parameter estimates of growth and the ... breeding strategies and for accurate breeding value estimation. The objectives ...... Sci. 23, 72-76. Van Wyk, J.B., Fair, M.D. & Cloete, S.W.P., 2003.

Environmental Transport Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. A. Wasiolek

2003-06-27

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (TWP) (BSC 2003 [163602]). Some documents in Figure 1-1 may be under development and not available when this report is issued. This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA), but access to the listed documents is not required to understand the contents of this report. This report is one of the reports that develops input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2003 [160699]) describes the conceptual model, the mathematical model, and the input parameters. The purpose of this analysis is to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or volcanic ash). The analysis was performed in accordance with the TWP (BSC 2003 [163602]). This analysis develops values of parameters associated with many features, events, and processes (FEPs) applicable to the reference biosphere (DTN: M00303SEPFEPS2.000 [162452]), which are addressed in the biosphere model (BSC 2003 [160699]). The treatment of these FEPs is described in BSC (2003 [160699

Environmental Transport Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

Wasiolek, M. A.

2003-01-01

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (TWP) (BSC 2003 [163602]). Some documents in Figure 1-1 may be under development and not available when this report is issued. This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA), but access to the listed documents is not required to understand the contents of this report. This report is one of the reports that develops input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2003 [160699]) describes the conceptual model, the mathematical model, and the input parameters. The purpose of this analysis is to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or volcanic ash). The analysis was performed in accordance with the TWP (BSC 2003 [163602]). This analysis develops values of parameters associated with many features, events, and processes (FEPs) applicable to the reference biosphere (DTN: M00303SEPFEPS2.000 [162452]), which are addressed in the biosphere model (BSC 2003 [160699]). The treatment of these FEPs is described in BSC (2003 [160699], Section 6.2). Parameter values

Comparison of environmental and egg microbiology associated with conventional and free-range laying hen management.

Science.gov (United States)

Jones, D R; Anderson, K E; Musgrove, M T

2011-09-01

Eggs from alternative production practices are a growing niche in the market. Meeting consumer requests for greater diversity in retail egg options has resulted in some unique challenges such as understanding the food safety implications of eggs from alternative production practices. A study was conducted to determine what, if any, differences exist between nest run conventional cage-produced eggs and free range-produced eggs. A sister flock of brown egg layers was maintained in conventional cage and free-range production with egg and environmental sampling every 6 wk from 20 to 79 wk of age. Aerobic, coliform, and yeast and mold populations were monitored. Environmental microbial levels were not always indicative of egg contamination levels. When significant differences (P free-range nest box eggs and free-range floor eggs were always greater than those of conventional cage eggs, which remained low throughout the study (0.42-0.02 log cfu/mL). Shell yeast and mold levels were significantly greater in free-range floor eggs than in free-range nest box eggs and conventional cage eggs throughout the entire study. Egg contents contamination levels were extremely low for all monitored populations and treatments. Season of the year played a role in both environmental and egg microbial levels. Winter had the lowest levels of all populations monitored for all treatments, except for aerobic free-range floor egg shell emulsions, which were increased (3.6 log cfu/mL). Understanding the differences in microbial populations present on conventional cage-produced and free range-produced eggs can lead to the development of effective cleaning procedures, enhancing food safety.

Thermal Orbital Environmental Parameter Study on the Propulsive Small Expendable Deployer System (ProSEDS) Using Earth Radiation Budget Experiment (ERBE) Data

Science.gov (United States)

Sharp, John R.; McConnaughey, Paul K. (Technical Monitor)

2002-01-01

The natural thermal environmental parameters used on the Space Station Program (SSP 30425) were generated by the Space Environmental Effects Branch at NASA's Marshall Space Flight Center (MSFC) utilizing extensive data from the Earth Radiation Budget Experiment (ERBE), a series of satellites which measured low earth orbit (LEO) albedo and outgoing long-wave radiation. Later, this temporal data was presented as a function of averaging times and orbital inclination for use by thermal engineers in NASA Technical Memorandum TM 4527. The data was not presented in a fashion readily usable by thermal engineering modeling tools and required knowledge of the thermal time constants and infrared versus solar spectrum sensitivity of the hardware being analyzed to be used properly. Another TM was recently issued as a guideline for utilizing these environments (NASA/TM-2001-211221) with more insight into the utilization by thermal analysts. This paper gives a top-level overview of the environmental parameters presented in the TM and a study of the effects of implementing these environments on an ongoing MSFC project, the Propulsive Small Expendable Deployer System (ProSEDS), compared to conventional orbital parameters that had been historically used.

Comparative environmental effects and cost analysis between conventional and non-conventional energy sources - A case for objective analysis and decision making in Nigeria's Energy Policy

International Nuclear Information System (INIS)

Akinbami, J. F. K.

1997-01-01

Energy, which is simply 'ability to do work' is the central cross-sectoral issue which affects all human activities either directly or indirectly. It is a vital input to economic growth and development of any economy, developing or developed. However, as there are two sides to a coin, so is the issue of energy use. While it contributes to the economic growth and development of a nation, its usage has with it attendant environmental consequences. At every stage along the chain, from resource delineation and extraction, through conversion, transportation, and end-use, the energy industry faces environmental challenges. Each of these stages and even the associated environmental burdens is not without a cost. This paper therefore sets out to review and compare the environmental effects as well as the cost analysis of both the conventional and non-conventional energy resources generally and with particular emphasis on Nigeria. This hopefully should then inform the citizenry in their drive for energy consumption as well as the nation's planners and decision makers in their efforts at adequate energy planning and management for both economic and environmental sustainability in the country

Parameter uncertainty in CGE Modeling of the environmental impacts of economic policies

International Nuclear Information System (INIS)

Abler, D.G.; Shortle, J.S.; Rodriguez, A.G.

1999-01-01

This study explores the role of parameter uncertainty in Computable General Equilibrium (CGE) modeling of the environmental impacts of macroeconomic and sectoral policies, using Costa Rica as a case for study. A CGE model is constructed which includes eight environmental indicators covering deforestation, pesticides, overfishing, hazardous wastes, inorganic wastes, organic wastes, greenhouse gases, and air pollution. The parameters are treated as random variables drawn from prespecified distributions. Evaluation of each policy option consists of a Monte Carlo experiment. The impacts of the policy options on the environmental indicators are relatively robust to different parameter values, in spite of the wide range of parameter values employed. 33 refs

Parameter uncertainty in CGE Modeling of the environmental impacts of economic policies

Energy Technology Data Exchange (ETDEWEB)

Abler, D.G.; Shortle, J.S. [Agricultural Economics, Pennsylvania State University, University Park, PA (United States); Rodriguez, A.G. [University of Costa Rica, San Jose (Costa Rica)

1999-07-01

This study explores the role of parameter uncertainty in Computable General Equilibrium (CGE) modeling of the environmental impacts of macroeconomic and sectoral policies, using Costa Rica as a case for study. A CGE model is constructed which includes eight environmental indicators covering deforestation, pesticides, overfishing, hazardous wastes, inorganic wastes, organic wastes, greenhouse gases, and air pollution. The parameters are treated as random variables drawn from prespecified distributions. Evaluation of each policy option consists of a Monte Carlo experiment. The impacts of the policy options on the environmental indicators are relatively robust to different parameter values, in spite of the wide range of parameter values employed. 33 refs.

Reactor parameters for European economic, safety and environmental studies

International Nuclear Information System (INIS)

Hancox, R.; Cooke, P.I.H.; Spears, W.R.

1990-01-01

Parameter sets for five 1200 MW e tokamak reactors were developed for the European Study Group on the Environmental, Safety-related and Economic Potential of Fusion Power, showing today's perception of the range of reactors likely to be available as a result of the Commission's fusion programme. On the basis of the cost of generating electricity, relative to a fission reactor, a reference set was chosen and endorsed by the Group for further studies including that on the environmental impact of fusion power. Key physics and technology parameters for the reference reactor are compared with values used in the ITER design, and with those from American studies. (author)

Influence of breed and environmental factors on litter parameters of ...

African Journals Online (AJOL)

Influence of breed and environmental factors on litter parameters of rabbits ... There was a non-significant effect of season on litter site at birth, kits alive at birth and ... to rabbit reproduction as it influenced negatively more litter parameters than ...

Agricultural and Environmental Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

Kaylie Rasmuson; Kurt Rautenstrauch

2003-01-01

This analysis is one of nine technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) biosphere model. It documents input parameters for the biosphere model, and supports the use of the model to develop Biosphere Dose Conversion Factors (BDCF). The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in the biosphere Technical Work Plan (TWP, BSC 2003a). It should be noted that some documents identified in Figure 1-1 may be under development and therefore not available at the time this document is issued. The ''Biosphere Model Report'' (BSC 2003b) describes the ERMYN and its input parameters. This analysis report, ANL-MGR-MD-000006, ''Agricultural and Environmental Input Parameters for the Biosphere Model'', is one of the five reports that develop input parameters for the biosphere model. This report defines and justifies values for twelve parameters required in the biosphere model. These parameters are related to use of contaminated groundwater to grow crops. The parameter values recommended in this report are used in the soil, plant, and carbon-14 submodels of the ERMYN

Comparison of conventional and organic management conditions on growth performance, carcass characteristics and haematological parameters in Karacabey Merino and Kivircik breeds.

Science.gov (United States)

Soysal, Deniz; Cibik, Recep; Aydin, Cenk; Ak, İbrahim

2011-04-01

Growth performance, carcass characteristics, post-slaughtering and haematological parameters of Kivircik and Karacabey Merino male lambs in conventional and organic management systems were compared. The animals which were weaned at 7 weeks of age were divided into Kivircik conventional, Kivircik organic (KO), Karacabey Merino conventional and Karacabey Merino organic (MO) groups containing 12 lambs each. Fattening was ended when lambs attained 35 kg of live weight. The time to attain the determined fattening weight was significantly different among the groups, and Merino lambs having higher live weight gain were earlier than Kivircik lambs (p < 0.05). Overall conventional (CG) and organic group lambs were also compared. Live weight gain, intra-abdominal fat amount, external fat thickness and visceral organ weight were significantly higher in CG lambs (p < 0.05). Higher haematocrit and erythrocyte counts were obtained with the CG group (p < 0.05), whilst triglyceride, total plasma cholesterol and lipoprotein (HDL, LDL, VLDL) levels between groups were not significant. Pneumonia was the unique infection, with an incidence of 50% (six lambs) and 16.6% (two lambs) for MO and KO animals, respectively. The mortality rate was 16.6% (two lambs) for MO group, whilst no mortality was recorded for KO group animals. The present study has shown that although Karacabey merino lambs had higher growth performance compared to Kivircik lambs, organically fattened lambs in whole exhibited inferior growth performance. Lower infection and mortality observed with Kivircik lambs suggested that they could be more resistant to infections and outdoor environmental conditions.

Geneva convention and Critical Loads: an example of Science-based Environmental Policy

International Nuclear Information System (INIS)

Rabago Juan-Aracil, I.; Alonso del Amo, R.

2011-01-01

Air pollution is one of the leading environmental problems of out times that could eventually change the living conditions of human beings and the ecosystems on the whole planet. Therefore, international forums have been created to discuss environmental policies aimed at the control of pollutant emissions and the protection of ecosystems and human health. the fundamental purpose is to take common actions that go beyond political borders, since in many cases the emissions of pollutants affect ecosystems far from the emission source. These were the objectives leading to the creation of the Geneva Convention on Long-Range Transboundary Air Pollution, of the Economic commission for Europe-United Nations (UNECE). (Author) 12 refs.

Investigating the role of urban development in the conventional environmental Kuznets curve: evidence from the globe.

Science.gov (United States)

Katircioglu, Setareh; Katircioglu, Salih; Kilinc, Ceyhun C

2018-03-19

We investigated the role of urbanization in the conventional environmental Kuznets curve (EKC) of the globe. The overall population and rural population were also considered for control purposes. Based on our findings, we suggest that the conventional EKC of the globe is not an inverted U-shape but becomes downward sloping when urban development is added and inverted U-shapes when the overall population and rural population volumes are added.

Agricultural and Environmental Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

Kaylie Rasmuson; Kurt Rautenstrauch

2003-06-20

This analysis is one of nine technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) biosphere model. It documents input parameters for the biosphere model, and supports the use of the model to develop Biosphere Dose Conversion Factors (BDCF). The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in the biosphere Technical Work Plan (TWP, BSC 2003a). It should be noted that some documents identified in Figure 1-1 may be under development and therefore not available at the time this document is issued. The ''Biosphere Model Report'' (BSC 2003b) describes the ERMYN and its input parameters. This analysis report, ANL-MGR-MD-000006, ''Agricultural and Environmental Input Parameters for the Biosphere Model'', is one of the five reports that develop input parameters for the biosphere model. This report defines and justifies values for twelve parameters required in the biosphere model. These parameters are related to use of contaminated groundwater to grow crops. The parameter values recommended in this report are used in the soil, plant, and carbon-14 submodels of the ERMYN.

Diagnostic performance of conventional MRI parameters and apparent diffusion coefficient values in differentiating between benign and malignant soft-tissue tumours.

Science.gov (United States)

Song, Y; Yoon, Y C; Chong, Y; Seo, S W; Choi, Y-L; Sohn, I; Kim, M-J

2017-08-01

To compare the abilities of conventional magnetic resonance imaging (MRI) and apparent diffusion coefficient (ADC) in differentiating between benign and malignant soft-tissue tumours (STT). A total of 123 patients with STT who underwent 3 T MRI, including diffusion-weighted imaging (DWI), were retrospectively analysed using variate conventional MRI parameters, ADC mean and ADC min . For the all-STT group, the correlation between the malignant STT conventional MRI parameters, except deep compartment involvement, compared to those of benign STT were statistically significant with univariate analysis. Maximum diameter of the tumour (p=0.001; odds ratio [OR], 8.97) and ADC mean (p=0.020; OR, 4.30) were independent factors with multivariate analysis. For the non-myxoid non-haemosiderin STT group, signal heterogeneity on axial T1-weighted imaging (T1WI; p=0.017), ADC mean , and ADC min (p=0.001, p=0.001), showed significant differences with univariate analysis between malignancy and benignity. Signal heterogeneity in axial T1WI (p=0.025; OR, 12.64) and ADC mean (p=0.004; OR, 33.15) were independent factors with multivariate analysis. ADC values as well as conventional MRI parameters were useful in differentiating between benign and malignant STT. The ADC mean was the most powerful diagnostic parameter in non-myxoid non-haemosiderin STT. Copyright © 2017 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Models and parameters for environmental radiological assessments

International Nuclear Information System (INIS)

Miller, C.W.

1983-01-01

This article reviews the forthcoming book Models and Parameters for Environmental Radiological Assessments, which presents a unified compilation of models and parameters for assessing the impact on man of radioactive discharges, both routine and accidental, into the environment. Models presented in this book include those developed for the prediction of atmospheric and hydrologic transport and deposition, for terrestrial and aquatic food-chain bioaccumulation, and for internal and external dosimetry. Summaries are presented for each of the transport and dosimetry areas previously for each of the transport and dosimetry areas previously mentioned, and details are available in the literature cited. A chapter of example problems illustrates many of the methodologies presented throughout the text. Models and parameters presented are based on the results of extensive literature reviews and evaluations performed primarily by the staff of the Health and Safety Research Division of Oak Ridge National Laboratory

Optimizing friction stir weld parameters of aluminum and copper using conventional milling machine

Science.gov (United States)

Manisegaran, Lohappriya V.; Ahmad, Nurainaa Ayuni; Nazri, Nurnadhirah; Noor, Amirul Syafiq Mohd; Ramachandran, Vignesh; Ismail, Muhammad Tarmizizulfika; Ahmad, Ku Zarina Ku; Daruis, Dian Darina Indah

2018-05-01

The joining of two of any particular materials through friction stir welding (FSW) are done by a rotating tool and the work piece material that generates heat which causes the region near the FSW tool to soften. This in return will mechanically intermix the work pieces. The first objective of this study is to join aluminum plates and copper plates by means of friction stir welding process using self-fabricated tools and conventional milling machine. This study also aims to investigate the optimum process parameters to produce the optimum mechanical properties of the welding joints for Aluminum plates and Copper plates. A suitable tool bit and a fixture is to be fabricated for the welding process. A conventional milling machine will be used to weld the aluminum and copper. The most important parameters to enable the process are speed and pressure of the tool (or tool design and alignment of the tool onto the work piece). The study showed that the best surface finish was produced from speed of 1150 rpm and tool bit tilted to 3°. For a 200mm × 100mm Aluminum 6061 with plate thickness of 2 mm at a speed of 1 mm/s, the time taken to complete the welding is only 200 seconds or equivalent to 3 minutes and 20 seconds. The Copper plates was successfully welded using FSW with tool rotation speed of 500 rpm, 700 rpm, 900 rpm, 1150 rpm and 1440 rpm and with welding traverse rate of 30 mm/min, 60 mm/min and 90 mm/min. As the conclusion, FSW using milling machine can be done on both Aluminum and Copper plates, however the weld parameters are different for the two types of plates.

Steam-treated wood pellets: Environmental and financial implications relative to fossil fuels and conventional pellets for electricity generation

International Nuclear Information System (INIS)

McKechnie, Jon; Saville, Brad; MacLean, Heather L.

2016-01-01

Highlights: • Steam-treated pellets can greatly reduce greenhouse gas emissions relative to coal. • Cost advantage is seen relative to conventional pellets. • Higher pellet cost is more than balanced by reduced retrofit capital requirements. • Low capacity factors further favour steam-treated pellets over conventional pellets. - Abstract: Steam-treated pellets can help to address technical barriers that limit the uptake of pellets as a fuel for electricity generation, but there is limited understanding of the cost and environmental impacts of their production and use. This study investigates life cycle environmental (greenhouse gas (GHG) and air pollutant emissions) and financial implications of electricity generation from steam-treated pellets, including fuel cycle activities (biomass supply, pellet production, and combustion) and retrofit infrastructure to enable 100% pellet firing at a generating station that previously used coal. Models are informed by operating experience of pellet manufacturers and generating stations utilising coal, steam-treated and conventional pellets. Results are compared with conventional pellets and fossil fuels in a case study of electricity generation in northwestern Ontario, Canada. Steam-treated pellet production has similar GHG impacts to conventional pellets as their higher biomass feedstock requirement is balanced by reduced process electricity consumption. GHG reductions of more than 90% relative to coal and ∼85% relative to natural gas (excluding retrofit infrastructure) could be obtained with both pellet options. Pellets can also reduce fuel cycle air pollutant emissions relative to coal by 30% (NOx), 97% (SOx), and 75% (PM 10 ). Lesser retrofit requirements for steam-treated pellets more than compensate for marginally higher pellet production costs, resulting in lower electricity production cost compared to conventional pellets ($0.14/kW h vs. $0.16/kW h). Impacts of retrofit infrastructure become increasingly

Environmental Transport Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

M. Wasiolek

2004-01-01

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment for the license application (TSPA-LA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA-LA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]) (TWP). This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA). This report is one of the five reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model and the mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed description of the model input parameters. The output of this report is used as direct input in the ''Nominal Performance Biosphere Dose Conversion Factor Analysis'' and in the ''Disruptive Event Biosphere Dose Conversion Factor Analysis'' that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios, respectively. The purpose of this analysis was to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or in volcanic ash). The analysis was performed in accordance with the TWP (BSC 2004 [DIRS 169573])

Environmental Transport Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek

2004-09-10

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment for the license application (TSPA-LA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA-LA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]) (TWP). This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA). This report is one of the five reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model and the mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed description of the model input parameters. The output of this report is used as direct input in the ''Nominal Performance Biosphere Dose Conversion Factor Analysis'' and in the ''Disruptive Event Biosphere Dose Conversion Factor Analysis'' that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios, respectively. The purpose of this analysis was to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or in volcanic ash). The analysis

Evaluation of new and conventional thermoluminescent phosphors for environmental monitoring using automated thermoluminescent dosimeter readers

International Nuclear Information System (INIS)

Rathbone, B.A.; Endres, A.W.; Antonio, E.J.

1994-10-01

In recent years, there has been considerable interest in a new generation of super-sensitive thermoluminescent (TL) phosphors for potential use in routine personnel and environmental monitoring. Two of these phosphors, α-Al 2 O 3 :C and LiF:Mg,Cu,P, are evaluated in this paper for selected characteristics relevant to environmental monitoring, along with two conventional phosphors widely used in environmental monitoring, LiF:Mg,Ti and CaF 2 :Dy. The characteristics evaluated are light-induced fading, light-induced background, linearity and variability at low dose, and the minimum measurable dose. These characteristics were determined using an automated commercial dosimetry system (Harshaw System 8800) and routine processing protocols. Annealing and readout protocols for each phosphor were optimized for use in a large-scale environmental monitoring program

Key processes and input parameters for environmental tritium models

International Nuclear Information System (INIS)

Bunnenberg, C.; Taschner, M.; Ogram, G.L.

1994-01-01

The primary objective of the work reported here is to define key processes and input parameters for mathematical models of environmental tritium behaviour adequate for use in safety analysis and licensing of fusion devices like NET and associated tritium handling facilities. (author). 45 refs., 3 figs

Key processes and input parameters for environmental tritium models

Energy Technology Data Exchange (ETDEWEB)

Bunnenberg, C; Taschner, M [Niedersaechsisches Inst. fuer Radiooekologie, Hannover (Germany); Ogram, G L [Ontario Hydro, Toronto, ON (Canada)

1994-12-31

The primary objective of the work reported here is to define key processes and input parameters for mathematical models of environmental tritium behaviour adequate for use in safety analysis and licensing of fusion devices like NET and associated tritium handling facilities. (author). 45 refs., 3 figs.

Agricultural and Environmental Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

K. Rasmuson; K. Rautenstrauch

2004-09-14

This analysis is one of 10 technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) (i.e., the biosphere model). It documents development of agricultural and environmental input parameters for the biosphere model, and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the ERMYN and its input parameters.

Agricultural and Environmental Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

K. Rasmuson; K. Rautenstrauch

2004-01-01

This analysis is one of 10 technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) (i.e., the biosphere model). It documents development of agricultural and environmental input parameters for the biosphere model, and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the ERMYN and its input parameters

Application of the Aarhus Convention

Directory of Open Access Journals (Sweden)

Tubić Bojan

2011-01-01

Full Text Available Convention on access to information, public participation in decision-making and access to justice in environmental matters (Aarhus Convention has been adopted in 1998 and entered into force three years later. It envisages three elements for strengthening democratic procedures in decision-making: access to information, public participation and access to justice. At the first meeting of the Member States the Aarhus Convention Compliance Committee was founded. The European Union is a party of the Convention and it has implemented the provisions in its legal order. After entering into force of the Convention, several Directives that regulate these issues in the EU have been enacted. Republic of Serbia has ratified the Convention in 2009 and it is currently in the process of its implementation by involving private subjects in decision-making on environmental issues.

Clinical and microbiological parameters in patients with self-ligating and conventional brackets during early phase of orthodontic treatment.

Science.gov (United States)

Pejda, Slavica; Varga, Marina Lapter; Milosevic, Sandra Anic; Mestrovic, Senka; Slaj, Martina; Repic, Dario; Bosnjak, Andrija

2013-01-01

To determine the effect of different bracket designs (conventional brackets and self-ligating brackets) on periodontal clinical parameters and periodontal pathogens in subgingival plaque. The following inclusion criteria were used: requirement of orthodontic treatment plan starting with alignment and leveling, good general health, healthy periodontium, no antibiotic therapy in the previous 6 months before the beginning of the study, and no smoking. The study sample totaled 38 patients (13 male, 25 female; mean age, 14.6 ± 2.0 years). Patients were divided into two groups with random distribution of brackets. Recording of clinical parameters was done before the placement of the orthodontic appliance (T0) and at 6 weeks (T1), 12 weeks (T2), and 18 weeks (T3) after full bonding of orthodontic appliances. Periodontal pathogens of subgingival microflora were detected at T3 using a commercially available polymerase chain reaction test (micro-Dent test) that contains probes for Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Prevotella intermedia, Tannerella forsythia, and Treponema denticola. There was a statistically significant higher prevalence of A actinomycetemcomitans in patients with conventional brackets than in patients with self-ligating brackets, but there was no statistically significant difference for other putative periodontal pathogens. The two different types of brackets did not show statistically significant differences in periodontal clinical parameters. Bracket design does not seem to have a strong influence on periodontal clinical parameters and periodontal pathogens in subgingival plaque. The correlation between some periodontal pathogens and clinical periodontal parameters was weak.

Influence of Environmental Parameters on Trichoderma Strains with Biocontrol Potential

Directory of Open Access Journals (Sweden)

Zsuzsanna Antal

2003-01-01

Full Text Available Several mycoparasitic strains belonging to the filamentous fungal genus Trichoderma are promising candidates for the biological control of plant pathogenic fungi. When planning the application of antagonistic Trichoderma strains for the purposes of biological control, it is very important to consider the environmental parameters affecting the biocontrol agents in the soil. A series of abiotic and biotic environmental parameters has an influence on the biocontrol efficacy of Trichoderma. Some important parameters to be considered are the effects of temperature, water potential and pH, and the presence of pesticides, metal ions and antagonistic bacteria in the soil. Most of the Trichoderma strains are mesophilic. Low temperatures in winter may cause a problem during biological control by influencing the activity of the biocontrol agents. Another problem emerging during the application of Trichoderma strains as biocontrol agents is that they cannot tolerate dry conditions, however, we may need biocontrol agents against plant pathogenic fungi which are able to grow and cause disease even in dry soils. The pH characteristics of the soil also belong to the most important environmental parameters affecting the activities of mycoparasitic Trichoderma strains. Within the frames of a complex integrated plant protection strategy, we may have to combine Trichoderma strains with chemical pesticides or metal compounds, therefore it is important to collect information about the effects of pesticides and metal ions on the biocontrol strains. Antagonistic soil bacteria may also have negative effects on the biocontrol abilities of Trichoderma strains, therefore it may be advantageous if a biocontrol strain possesses bacterium- degrading abilities as well. This review will discuss the literature about the influence of temperature, water potential, pH, pesticides, metal ions and antagonistic bacteria on mycoparasitic Trichoderma strains including the results of our

Variation among conventional cultivars could be used as a criterion for environmental safety assessment of Bt rice on nontarget arthropods

Science.gov (United States)

Wang, Fang; Dang, Cong; Chang, Xuefei; Tian, Junce; Lu, Zengbin; Chen, Yang; Ye, Gongyin

2017-02-01

The current difficulty facing risk evaluations of Bacillus thuringiensis (Bt) crops on nontarget arthropods (NTAs) is the lack of criteria for determining what represents unacceptable risk. In this study, we investigated the biological parameters in the laboratory and field population abundance of Nilaparvata lugens (Hemiptera: Delphacidae) on two Bt rice lines and the non-Bt parent, together with 14 other conventional rice cultivars. Significant difference were found in nymphal duration and fecundity of N. lugens fed on Bt rice KMD2, as well as field population density on 12 October, compared with non-Bt parent. However, compared with the variation among conventional rice cultivars, the variation of each parameter between Bt rice and the non-Bt parent was much smaller, which can be easily seen from low-high bar graphs and also the coefficient of variation value (C.V). The variation among conventional cultivars is proposed to be used as a criterion for the safety assessment of Bt rice on NTAs, particularly when statistically significant differences in several parameters are found between Bt rice and its non-Bt parent. Coefficient of variation is suggested as a promising parameter for ecological risk judgement of IRGM rice on NTAs.

Environmental-Economic Accounts and Financial Resource Mobilisation for Implementation the Convention on Biological Diversity

OpenAIRE

Cesare Costantino; Emanuela Recchini

2015-01-01

At the Rio “Earth Summit” the Convention on Biological Diversity introduced a global commitment to conservation of biological diversity and sustainable use of its components. An implementation process is going on, based on a strategic plan, biodiversity targets and a strategy for mobilizing financial resources. According to target “2”, by 2020 national accounts should include monetary aggregates related to biodiversity. Environmental accounts can play an important role – together with other i...

Environmental impacts of organic and conventional agricultural products--are the differences captured by life cycle assessment?

Science.gov (United States)

Meier, Matthias S; Stoessel, Franziska; Jungbluth, Niels; Juraske, Ronnie; Schader, Christian; Stolze, Matthias

2015-02-01

Comprehensive assessment tools are needed that reliably describe environmental impacts of different agricultural systems in order to develop sustainable high yielding agricultural production systems with minimal impacts on the environment. Today, Life Cycle Assessment (LCA) is increasingly used to assess and compare the environmental sustainability of agricultural products from conventional and organic agriculture. However, LCA studies comparing agricultural products from conventional and organic farming systems report a wide variation in the resource efficiency of products from these systems. The studies show that impacts per area farmed land are usually less in organic systems, but related to the quantity produced impacts are often higher. We reviewed 34 comparative LCA studies of organic and conventional agricultural products to analyze whether this result is solely due to the usually lower yields in organic systems or also due to inaccurate modeling within LCA. Comparative LCAs on agricultural products from organic and conventional farming systems often do not adequately differentiate the specific characteristics of the respective farming system in the goal and scope definition and in the inventory analysis. Further, often only a limited number of impact categories are assessed within the impact assessment not allowing for a comprehensive environmental assessment. The most critical points we identified relate to the nitrogen (N) fluxes influencing acidification, eutrophication, and global warming potential, and biodiversity. Usually, N-emissions in LCA inventories of agricultural products are based on model calculations. Modeled N-emissions often do not correspond with the actual amount of N left in the system that may result in potential emissions. Reasons for this may be that N-models are not well adapted to the mode of action of organic fertilizers and that N-emission models often are built on assumptions from conventional agriculture leading to even greater

Comparison of Carcass Characteristics, Meat Quality, and Blood Parameters of Slow and Fast Grown Female Broiler Chickens Raised in Organic or Conventional Production System

Science.gov (United States)

Cömert, Muazzez; Şayan, Yılmaz; Kırkpınar, Figen; Bayraktar, Ö. Hakan; Mert, Selim

2016-01-01

The objective of the study was to compare the carcass characteristics, meat quality, and blood parameters of slow and fast grown female broiler chickens fed in organic or conventional production system. The two genotypes tested were medium slow-growing chickens (SG, Hubbard Red JA) and commercial fast-growing chickens (FG, Ross 308). Both genotypes (each represented by 400 chickens) were divided into two sub-groups fed either organic (O) or conventional (C) systems. Chickens of each genotype and system were raised in a semi environmentally controlled poultry house until 21 d of age and were assigned to 5 pens of 40 chickens each. Then, O system chickens were transferred into an open-side poultry house with an outdoor run. At 81 d of age, 10 female chickens from each genotype and from each production system (n = 40) were randomly chosen to provide material for analysis, and were weighed and brought to the slaughterhouse to assess carcass characteristics and meat quality. The blood parameters were determined by using 5 female chickens from each genotype and from each production system (n = 20). FG had the higher live weight, along with carcass, breast, and thigh-drumstick weights compared to SG (pcarcass characteristics of female chickens was genotype, whereas the organic system contributed to enhanced meat quality. These findings provide a better understanding of the relative roles of genotype and production systems in female broiler characteristics, and might aid producers in designing their facilities to optimize yield and quality while maintaining acceptable animal welfare standards. PMID:26954206

Are nuclear ships environmentally safer than conventionally powered ships

International Nuclear Information System (INIS)

Bone, C.A.; Molgaard, C.A.; Helmkamp, J.C.; Golbeck, A.L.

1988-01-01

An epidemiologic analysis was conducted to determine if risk of hospitalization varied by age, ship type, or occupation between nuclear and conventional powered ship crews in the U.S. Navy. Study cohorts consisted of all male enlisted personnel who served exclusively aboard conventional or nuclear powered aircraft carriers and cruisers during the years 1975-1979; cases were those men hospitalized during this period (N = 48,242). Conventional ship personnel showed significantly elevated rates of injury and disease when compared to nuclear ship personnel. The largest relative risks by age occurred for conventional ship crewmen less than 30 years old. Seaman, logistics (supply), and healthcare personnel serving aboard conventional ships comprised the occupational groups exhibiting the highest hospitalization rate differentials. The results strongly suggest that nuclear ships provide a healthier, safer working and living environment than conventional ships

The methodological convention 2,0 for the estimation of environmental costs. An economic evaluation of environmental damages; Methodenkonvention 2.0 zur Schaetzung von Umweltkosten. Oekonomische Bewertung von Umweltschaeden

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-08-15

The reliable estimation of environmental damage costs requires a high degree of transparency of the objectives, assumptions and methods of assessment in order to ensure a correct classification and comparability of the cost factors. The methods convention under consideration aims to develop uniform standards for the technical evaluation of environmental costs and to improve the transparency of the estimates.

Environmental parameters series. 3. Concentration factors of radionuclides in freshwater organisms

International Nuclear Information System (INIS)

1994-03-01

This report outlines recent research activities of Radioactive Waste Management Center. Aiming to estimate the radiation dose of man exposed to radioactive materials in an environment, construction of a calculation model on the transfer of radionuclide in the environment was attempted. This issue, Environmental parameter series No.3 includes six reports on the factors related to environmental concentration for radionuclides. The title of the reports are as follows; Factors modifying the concentration factor (CF), Evaluation of accumulation of radionuclides in brackish water organisms, Dose assessment, CF derived from Japanese limnological data, Data table of CF and Metabolic parameters in relation to bioaccumulation of elements by organisms. In addition to collect and arrange the existing data, CF was calculated based on the concentration of stable elements in various lakes and rivers in Japan. (M.N.)

Indoor Environmental Quality in Mechanically Ventilated, Energy-Efficient Buildings vs. Conventional Buildings.

Science.gov (United States)

Wallner, Peter; Munoz, Ute; Tappler, Peter; Wanka, Anna; Kundi, Michael; Shelton, Janie F; Hutter, Hans-Peter

2015-11-06

Energy-efficient buildings need mechanical ventilation. However, there are concerns that inadequate mechanical ventilation may lead to impaired indoor air quality. Using a semi-experimental field study, we investigated if exposure of occupants of two types of buildings (mechanical vs. natural ventilation) differs with regard to indoor air pollutants and climate factors. We investigated living and bedrooms in 123 buildings (62 highly energy-efficient and 61 conventional buildings) built in the years 2010 to 2012 in Austria (mainly Vienna and Lower Austria). Measurements of indoor parameters (climate, chemical pollutants and biological contaminants) were conducted twice. In total, more than 3000 measurements were performed. Almost all indoor air quality and room climate parameters showed significantly better results in mechanically ventilated homes compared to those relying on ventilation from open windows and/or doors. This study does not support the hypothesis that occupants in mechanically ventilated low energy houses are exposed to lower indoor air quality.

Predictive value of different conventional and non-conventional MRI-parameters for specific domains of cognitive function in multiple sclerosis.

Science.gov (United States)

Pinter, Daniela; Khalil, Michael; Pichler, Alexander; Langkammer, Christian; Ropele, Stefan; Marschik, Peter B; Fuchs, Siegrid; Fazekas, Franz; Enzinger, Christian

2015-01-01

While many studies correlated cognitive function with changes in brain morphology in multiple sclerosis (MS), few of them used a multi-parametric approach in a single dataset so far. We thus here assessed the predictive value of different conventional and quantitative MRI-parameters both for overall and domain-specific cognitive performance in MS patients from a single center. 69 patients (17 clinically isolated syndrome, 47 relapsing-remitting MS, 5 secondary-progressive MS) underwent the "Brief Repeatable Battery of Neuropsychological Tests" assessing overall cognition, cognitive efficiency and memory function as well as MRI at 3 Tesla to obtain T2-lesion load (T2-LL), normalized brain volume (global brain volume loss), normalized cortical volume (NCV), normalized thalamic volume (NTV), normalized hippocampal volume (NHV), normalized caudate nuclei volume (NCNV), basal ganglia R2* values (iron deposition) and magnetization transfer ratios (MTRs) for cortex and normal appearing brain tissue (NABT). Regression models including clinical, demographic variables and MRI-parameters explained 22-27% of variance of overall cognition, 17-26% of cognitive efficiency and 22-23% of memory. NCV, T2-LL and MTR of NABT were the strongest predictors of overall cognitive function. Cognitive efficiency was best predicted by NCV, T2-LL and iron deposition in the basal ganglia. NTV was the strongest predictor for memory function and NHV was particularly related to memory function. The predictive value of distinct MRI-parameters differs for specific domains of cognitive function, with a greater impact of cortical volume, focal and diffuse white matter abnormalities on overall cognitive function, an additional role of basal ganglia iron deposition on cognitive efficiency, and thalamic and hippocampal volume on memory function. This suggests the usefulness of using multiparametric MRI to assess (micro)structural correlates of different cognitive constructs.

A comparison of the environmental impact of pesticide use in integrated and conventional potato cultivation in the Netherlands

NARCIS (Netherlands)

Jong, de F.M.W.; Snoo, de G.R.

2002-01-01

To reduce the environmental impact of agriculture in The Netherlands, a number of labels and certification schemes for integrated farming exist. This article compares the pesticide use associated with ware-potato cultivation by integrated and conventional methods, the former as certified under the

Soil biota and agriculture production in conventional and organic farming

Science.gov (United States)

Schrama, Maarten; de Haan, Joj; Carvalho, Sabrina; Kroonen, Mark; Verstegen, Harry; Van der Putten, Wim

2015-04-01

Sustainable food production for a growing world population requires a healthy soil that can buffer environmental extremes and minimize its losses. There are currently two views on how to achieve this: by intensifying conventional agriculture or by developing organically based agriculture. It has been established that yields of conventional agriculture can be 20% higher than of organic agriculture. However, high yields of intensified conventional agriculture trade off with loss of soil biodiversity, leaching of nutrients, and other unwanted ecosystem dis-services. One of the key explanations for the loss of nutrients and GHG from intensive agriculture is that it results in high dynamics of nutrient losses, and policy has aimed at reducing temporal variation. However, little is known about how different agricultural practices affect spatial variation, and it is unknown how soil fauna acts this. In this study we compare the spatial and temporal variation of physical, chemical and biological parameters in a long term (13-year) field experiment with two conventional farming systems (low and medium organic matter input) and one organic farming system (high organic matter input) and we evaluate the impact on ecosystem services that these farming systems provide. Soil chemical (N availability, N mineralization, pH) and soil biological parameters (nematode abundance, bacterial and fungal biomass) show considerably higher spatial variation under conventional farming than under organic farming. Higher variation in soil chemical and biological parameters coincides with the presence of 'leaky' spots (high nitrate leaching) in conventional farming systems, which shift unpredictably over the course of one season. Although variation in soil physical factors (soil organic matter, soil aggregation, soil moisture) was similar between treatments, but averages were higher under organic farming, indicating more buffered conditions for nutrient cycling. All these changes coincide with

Conventional, Partially Converted and Environmentally Friendly Farming in South Korea: Profitability and Factors Affecting Farmers’ Choice

Directory of Open Access Journals (Sweden)

Saem Lee

2016-07-01

Full Text Available While organic farming is well established in Europe a nd USA, it is still catching up in Asian countries. The government of South Korea has implemented environmentally friendly farming that encompasses organic farming. Despite the promotion of environmentally friendly farming, it still has a low share in South Korea and partially converted farming has emerged in some districts of South Korea. However, the partially converted farming has not yet been investigated by the government. Thus, our study implemented a financial analysis to compare the annual costs and net returns of conventional, partially converted and environmentally friendly farming in Gangwon Province. The result showed that environmentally friendly farming was more profitable with respect to farm net returns. To find out the factors affecting the adoption of environmentally friendly farming, multinomial logistic regression was implemented. The findings revealed that education and subsidy positively and significantly influenced the probability of farmers’ choice on partially converted and environmentally friendly farming. Farm size had a negative and significant relationship with only environmentally friendly farming. This study will contribute to future policy establishment for sustainable agriculture as recommended by improving the quality of fertilizers, suggesting the additional investigation associated with partially converted farmers.

Lumped parameter models for the interpretation of environmental tracer data

Energy Technology Data Exchange (ETDEWEB)

Maloszewski, P [GSF-Inst. for Hydrology, Oberschleissheim (Germany); Zuber, A [Institute of Nuclear Physics, Cracow (Poland)

1996-10-01

Principles of the lumped-parameter approach to the interpretation of environmental tracer data are given. The following models are considered: the piston flow model (PFM), exponential flow model (EM), linear model (LM), combined piston flow and exponential flow model (EPM), combined linear flow and piston flow model (LPM), and dispersion model (DM). The applicability of these models for the interpretation of different tracer data is discussed for a steady state flow approximation. Case studies are given to exemplify the applicability of the lumped-parameter approach. Description of a user-friendly computer program is given. (author). 68 refs, 25 figs, 4 tabs.

Lumped parameter models for the interpretation of environmental tracer data

International Nuclear Information System (INIS)

Maloszewski, P.; Zuber, A.

1996-01-01

Principles of the lumped-parameter approach to the interpretation of environmental tracer data are given. The following models are considered: the piston flow model (PFM), exponential flow model (EM), linear model (LM), combined piston flow and exponential flow model (EPM), combined linear flow and piston flow model (LPM), and dispersion model (DM). The applicability of these models for the interpretation of different tracer data is discussed for a steady state flow approximation. Case studies are given to exemplify the applicability of the lumped-parameter approach. Description of a user-friendly computer program is given. (author). 68 refs, 25 figs, 4 tabs

The Legitimacy of Private Sector’s Involvement in Global Environmental Regimes: The Case of the Convention on Biological Diversity

OpenAIRE

Orsini, Amandine

2008-01-01

This paper analyses a research topic poorly considered by authors interested in the legitimacy of environmental governance, that is to say the dynamics created by its interpretation by private sector actors. In order to fill this gap, a recent decision of the Convention on Biological Diversity (CBD) –decision VIII/17 adopted in Marsh 2006- to further involve the private sector in the activities of the Convention is considered. The legitimacy of decision VIII/17 is twofold. Its first dimension...

Environmental parameters linked to the last migratory stage of barnacle geese en route to their breeding sites

NARCIS (Netherlands)

Najafabadi, M.S.; Darvishzadeh, R.; Skidmore, A.K.; Kölzsch, Andrea; Exo, Klaus-Michael; Nolet, Bart A.; Griffin, Larry; Stahl, Julia; Havinga, Paul J.M.; Meratnia, Nirvana; Toxopeus, A.G.

The migration timing of birds can be controlled by endogenous parameters. However, little is known about how environmental parameters influence the timing of migration and which have the greatest influence at different stages of migration. In this study we identified the main environmental

Environmental parameters linked to the last migratory stage of barnacle geese en route to their breeding sites

NARCIS (Netherlands)

Shariati Najafabadi, Mitra; Darvishzadeh, Roshanak; Skidmore, A.K.; Kölzsch, A.; Exo, K-M.; Nolet, B.A.; Griffin, L.; Stahl, J.; Havinga, Paul J.M.; Meratnia, Nirvana; Toxopeus, A.G.

2016-01-01

The migration timing of birds can be controlled by endogenous parameters. However, little is known about how environmental parameters influence the timing of migration and which have the greatest influence at different stages of migration. In this study we identified the main environmental

Using Marine and Freshwater Fish Environmental Intelligence Networks Under Different Climate Change Scenarios to Evaluate the Effectiveness of the Minamata Convention on Mercury

Science.gov (United States)

Bank, M. S.

2017-12-01

The Minamata Convention on Mercury was recently ratified and will go into effect on August 16, 2017. As noted in the convention text, fish are an important source of nutrition to consumers worldwide and several marine and freshwater species represent important links in the global source-receptor dynamics of methylmercury. However, despite its importance, a coordinated global program for marine and freshwater fish species using accredited laboratories, reproducible data and reliable models is still lacking. In recent years fish mercury science has evolved significantly with its use of advanced technologies and computational models to address this complex and ubiquitous environmental and public health issue. These advances in the field have made it essential that transparency be enhanced to ensure that fish mercury studies used in support of the convention are truly reproducible and scientifically sound. One primary goal of this presentation is to evaluate fish bioinformatics and methods, results and inferential reproducibility as it relates to aggregated uncertainty in mercury fish research models, science, and biomonitoring. I use models, environmental intelligence networks and simulations of the effects of a changing climate on methylmercury in marine and freshwater fish to examine how climate change and the convention itself may create further uncertainties for policymakers to consider. Lastly, I will also present an environmental intelligence framework for fish mercury bioaccumulation models and biomonitoring in support of the evaluation of the effectiveness of the Minamata Convention on Mercury.

Recommended environmental dose calculation methods and Hanford-specific parameters

International Nuclear Information System (INIS)

Schreckhise, R.G.; Rhoads, K.; Napier, B.A.; Ramsdell, J.V.; Davis, J.S.

1993-03-01

This document was developed to support the Hanford Environmental Dose overview Panel (HEDOP). The Panel is responsible for reviewing all assessments of potential doses received by humans and other biota resulting from the actual or possible environmental releases of radioactive and other hazardous materials from facilities and/or operations belonging to the US Department of Energy on the Hanford Site in south-central Washington. This document serves as a guide to be used for developing estimates of potential radiation doses, or other measures of risk or health impacts, to people and other biota in the environs on and around the Hanford Site. It provides information to develop technically sound estimates of exposure (i.e., potential or actual) to humans or other biotic receptors that could result from the environmental transport of potentially harmful materials that have been, or could be, released from Hanford operations or facilities. Parameter values and information that are specific to the Hanford environs as well as other supporting material are included in this document

Recommended environmental dose calculation methods and Hanford-specific parameters

Energy Technology Data Exchange (ETDEWEB)

Schreckhise, R.G.; Rhoads, K.; Napier, B.A.; Ramsdell, J.V. (Pacific Northwest Lab., Richland, WA (United States)); Davis, J.S. (Westinghouse Hanford Co., Richland, WA (United States))

1993-03-01

This document was developed to support the Hanford Environmental Dose overview Panel (HEDOP). The Panel is responsible for reviewing all assessments of potential doses received by humans and other biota resulting from the actual or possible environmental releases of radioactive and other hazardous materials from facilities and/or operations belonging to the US Department of Energy on the Hanford Site in south-central Washington. This document serves as a guide to be used for developing estimates of potential radiation doses, or other measures of risk or health impacts, to people and other biota in the environs on and around the Hanford Site. It provides information to develop technically sound estimates of exposure (i.e., potential or actual) to humans or other biotic receptors that could result from the environmental transport of potentially harmful materials that have been, or could be, released from Hanford operations or facilities. Parameter values and information that are specific to the Hanford environs as well as other supporting material are included in this document.

Correlation and agreement of a digital and conventional method to measure arch parameters.

Science.gov (United States)

Nawi, Nes; Mohamed, Alizae Marny; Marizan Nor, Murshida; Ashar, Nor Atika

2018-01-01

The aim of the present study was to determine the overall reliability and validity of arch parameters measured digitally compared to conventional measurement. A sample of 111 plaster study models of Down syndrome (DS) patients were digitized using a blue light three-dimensional (3D) scanner. Digital and manual measurements of defined parameters were performed using Geomagic analysis software (Geomagic Studio 2014 software, 3D Systems, Rock Hill, SC, USA) on digital models and with a digital calliper (Tuten, Germany) on plaster study models. Both measurements were repeated twice to validate the intraexaminer reliability based on intraclass correlation coefficients (ICCs) using the independent t test and Pearson's correlation, respectively. The Bland-Altman method of analysis was used to evaluate the agreement of the measurement between the digital and plaster models. No statistically significant differences (p > 0.05) were found between the manual and digital methods when measuring the arch width, arch length, and space analysis. In addition, all parameters showed a significant correlation coefficient (r ≥ 0.972; p digital and manual measurements. Furthermore, a positive agreement between digital and manual measurements of the arch width (90-96%), arch length and space analysis (95-99%) were also distinguished using the Bland-Altman method. These results demonstrate that 3D blue light scanning and measurement software are able to precisely produce 3D digital model and measure arch width, arch length, and space analysis. The 3D digital model is valid to be used in various clinical applications.

Relationship between bacterial diversity and environmental parameters during composting of different raw materials.

Science.gov (United States)

Wang, Xueqin; Cui, Hongyang; Shi, Jianhong; Zhao, Xinyu; Zhao, Yue; Wei, Zimin

2015-12-01

The aim of this study was to compare the bacterial structure of seven different composts. The primary environmental factors affecting bacterial species were identified, and a strategy to enhance the abundance of uncultured bacteria through controlling relevant environmental parameters was proposed. The results showed that the physical-chemical parameters of each different pile changed in its own manner during composting, which affected the structure and succession of bacteria in different ways. DGGE profiles showed that there were 10 prominent species during composting. Among them, four species existed in all compost types, two species existed in several piles and four species were detected in a single material. Redundancy analysis results showed that bacterial species compositions were significantly influenced by C/N and moisture (p<0.05). The optimal range of C/N was 14-27. Based on these results, the primary environmental factors affecting a certain species were further identified as a potential control of bacterial diversity. Copyright © 2015 Elsevier Ltd. All rights reserved.

A dynamic agent-based analysis for the environmental impacts of conventional and novel book retailing.

Science.gov (United States)

Xu, Ming; Allenby, Braden; Kim, Junbeum; Kahhat, Ramzy

2009-04-15

The dynamics of an e-commerce market and the associated environmental impacts from a bottom-up perspective using an agent-based model is explored. A conceptual meta-theory from psychology is adopted to form the behavioral rules of artificial consumers choosing different methods of buying a book, including conventional bookstores, e-commerce, and a proposed self-pick-up option. Given the energy and emissions savings that result from a shift to e-commerce from bookstore purchase, it appears that reductions in environmental impacts are relatively probable. Additionally, our results suggest that the shift to e-commerce is mainly due to the growth of Internet users, which ties energy and emissions savings to Internet penetration. Moreover, under any scenario, the energy and emissions savings will be provided by the introduction of the proposed self-pick-up option. Our model thus provides insights into market behaviors and related environmental impacts of the growing use of e-commerce systems at the retail level, and provides a basis for the development and implementation of more sustainable policies and practices.

The Analysis of Force Parameters in Drawing Process of High Carbon Steel Wires in Conventional and Hydrodynamic Dies

Directory of Open Access Journals (Sweden)

Suliga M.

2017-12-01

Full Text Available The paper analyzes force parameters in the process of multistage drawing of steel wires in conventional and hydrodynamic dies. The drawing process of the wire rod with a diameter of 5.5 mm for wires with a diameter of 1.70 mm was performed in 12 drafts with the usage of the multistage drawbench Koch KGT with the speed range of 5-25 m/s.

Environmental-Economic Accounts and Financial Resource Mobilisation for Implementation the Convention on Biological Diversity

Directory of Open Access Journals (Sweden)

Cesare Costantino

2015-12-01

Full Text Available At the Rio “Earth Summit” the Convention on Biological Diversity introduced a global commitment to conservation of biological diversity and sustainable use of its components. An implementation process is going on, based on a strategic plan, biodiversity targets and a strategy for mobilizing financial resources. According to target “2”, by 2020 national accounts should include monetary aggregates related to biodiversity. Environmental accounts can play an important role – together with other information – in monitoring processes connected with target “20”: contribute to identifying activities needed to preserve biodiversity, calculating the associated costs and eventually assessing funding needs. In particular, EPEA and ReMEA are valuable accounting tools for providing data on biodiversity expenditure. The high quality of the information provided by these accounts makes them good candidates for being adopted world-wide within the Convention’s monitoring processes. Enhanced interaction between statisticians and officials from ministries of environment would be crucial to reach significant advancement towards standardization of the information used in support of the Convention.

Repository environmental parameters and models/methodologies relevant to assessing the performance of high-level waste packages in basalt, tuff, and salt

Energy Technology Data Exchange (ETDEWEB)

Claiborne, H.C.; Croff, A.G.; Griess, J.C.; Smith, F.J.

1987-09-01

This document provides specifications for models/methodologies that could be employed in determining postclosure repository environmental parameters relevant to the performance of high-level waste packages for the Basalt Waste Isolation Project (BWIP) at Richland, Washington, the tuff at Yucca Mountain by the Nevada Test Site, and the bedded salt in Deaf Smith County, Texas. Guidance is provided on the identify of the relevant repository environmental parameters; the models/methodologies employed to determine the parameters, and the input data base for the models/methodologies. Supporting studies included are an analysis of potential waste package failure modes leading to identification of the relevant repository environmental parameters, an evaluation of the credible range of the repository environmental parameters, and a summary of the review of existing models/methodologies currently employed in determining repository environmental parameters relevant to waste package performance. 327 refs., 26 figs., 19 tabs.

Repository environmental parameters and models/methodologies relevant to assessing the performance of high-level waste packages in basalt, tuff, and salt

International Nuclear Information System (INIS)

Claiborne, H.C.; Croff, A.G.; Griess, J.C.; Smith, F.J.

1987-09-01

This document provides specifications for models/methodologies that could be employed in determining postclosure repository environmental parameters relevant to the performance of high-level waste packages for the Basalt Waste Isolation Project (BWIP) at Richland, Washington, the tuff at Yucca Mountain by the Nevada Test Site, and the bedded salt in Deaf Smith County, Texas. Guidance is provided on the identify of the relevant repository environmental parameters; the models/methodologies employed to determine the parameters, and the input data base for the models/methodologies. Supporting studies included are an analysis of potential waste package failure modes leading to identification of the relevant repository environmental parameters, an evaluation of the credible range of the repository environmental parameters, and a summary of the review of existing models/methodologies currently employed in determining repository environmental parameters relevant to waste package performance. 327 refs., 26 figs., 19 tabs

Inexpensive, Open-Source, Internet of Things-Enabled Sensing Stations for Environmental Parameter Measurements

Science.gov (United States)

Marchetto, P. M.; Hofmeister, K.; Walter, M. T.

2015-12-01

In the age of the Internet, data is inherently portable. Given the shrinking numbers of stream gauges in the US under the banner of the USGS and the lack of collocation of sensors for environmental parameters, it is clear the only way to collect these data is with near real-time, multi-parameters sensing stations. We are designing a system that can be built and deployed for under $300 by community groups interested in learning more about the land that they are protecting, such as conservation groups, or groups interested in the basic science behind sensing and ecology, such as makerspaces. Sensing stations like these will enable a greater diversity of data collection while increasing public awareness of environmental issues and the research process.

Minamata Convention on Mercury

Science.gov (United States)

On November 6, 2013 the United States signed the Minamata Convention on Mercury, a new multilateral environmental agreement that addresses specific human activities which are contributing to widespread mercury pollution

Sensitivity analysis of specific activity model parameters for environmental transport of 3H and dose assessment

International Nuclear Information System (INIS)

Rout, S.; Mishra, D.G.; Ravi, P.M.; Tripathi, R.M.

2016-01-01

Tritium is one of the radionuclides likely to get released to the environment from Pressurized Heavy Water Reactors. Environmental models are extensively used to quantify the complex environmental transport processes of radionuclides and also to assess the impact to the environment. Model parameters exerting the significant influence on model results are identified through a sensitivity analysis (SA). SA is the study of how the variation (uncertainty) in the output of a mathematical model can be apportioned, qualitatively or quantitatively, to different sources of variation in the input parameters. This study was designed to identify the sensitive model parameters of specific activity model (TRS 1616, IAEA) for environmental transfer of 3 H following release to air and then to vegetation and animal products. Model includes parameters such as air to soil transfer factor (CRs), Tissue Free Water 3 H to Organically Bound 3 H ratio (Rp), Relative humidity (RH), WCP (fractional water content) and WEQp (water equivalent factor) any change in these parameters leads to change in 3 H level in vegetation and animal products consequently change in dose due to ingestion. All these parameters are function of climate and/or plant which change with time, space and species. Estimation of these parameters at every time is a time consuming and also required sophisticated instrumentation. Therefore it is necessary to identify the sensitive parameters and freeze the values of least sensitive parameters at constant values for more accurate estimation of 3 H dose in short time for routine assessment

A functional comparison of conventional knee-ankle-foot orthoses and a microprocessor-controlled leg orthosis system based on biomechanical parameters.

Science.gov (United States)

Schmalz, Thomas; Pröbsting, Eva; Auberger, Roland; Siewert, Gordon

2016-04-01

The microprocessor-controlled leg orthosis C-Brace enables patients with paretic or paralysed lower limb muscles to use dampened knee flexion under weight-bearing and speed-adapted control of the swing phase. The objective of the present study was to investigate the new technical functions of the C-Brace orthosis, based on biomechanical parameters. The study enrolled six patients. The C-Brace orthosis is compared with conventional leg orthoses (four stance control orthoses, two locked knee-ankle-foot orthoses) using biomechanical parameters of level walking, descending ramps and descending stairs. Ground reaction forces, joint moments and kinematic parameters were measured for level walking as well as ascending and descending ramps and stairs. With the C-Brace, a nearly natural stance phase knee flexion was measured during level walking (mean value 11° ± 5.6°). The maximum swing phase knee flexion angle of the C-Brace approached the normal value of 65° more closely than the stance control orthoses (66° ± 8.5° vs 74° ± 6.4°). No significant differences in the joint moments were found between the C-Brace and stance control orthosis conditions. In contrast to the conventional orthoses, all patients were able to ambulate ramps and stairs using a step-over-step technique with C-Brace (flexion angle 64.6° ± 8.2° and 70.5° ± 12.4°). The results show that the functions of the C-Brace for situation-dependent knee flexion under weight bearing have been used by patients with a high level of confidence. The functional benefits of the C-Brace in comparison with the conventional orthotic mechanisms could be demonstrated most clearly for descending ramps and stairs. The C-Brace orthosis is able to combine improved orthotic function with sustained orthotic safety. © The International Society for Prosthetics and Orthotics 2014.

Interdependence of environmental parameters and sand dwelling benthic species abundance: a multivariate approach

Digital Repository Service at National Institute of Oceanography (India)

Harkantra, S.N.; Parulekar, A.H.

Multivariate analysis showed dependence of distribution and abundance of sand dwelling fauna on more than one ecologically significant environmental parameters rather than one ecological master factor. Salinity, grain size, beach gradient, dissolved...

Selected environmental considerations and their measuring parameters for nuclear power plant siting

International Nuclear Information System (INIS)

Norris, J.A.

1975-01-01

The site selection process for nuclear power stations encompasses a broad range of considerations. A categorization of these considerations consistent with the needs of the U. S. Atomic Energy Commission, as the regulatory agency, and of the utility company involves these major areas of concern. They are issues related to safety, environmental impact, and engineering/economics. The more important environmental considerations and their measuring parameters presented in this paper include biota, ecological systems and water quality, land use, aesthetics, water availability, and meteorology. (U.S.)

Human comfort and self-estimated performance in relation to indoor environmental parameters and building features

DEFF Research Database (Denmark)

Frontczak, Monika Joanna

The main objective of the Ph.D. study was to examine occupants’ perception of comfort and self-estimated job performance in non-industrial buildings (homes and offices), in particular how building occupants understand comfort and which parameters, not necessarily related to indoor environments...... and storage, noise level and visual privacy. However, if job performance is considered, then satisfaction with the main indoor environmental parameters should be addressed first as they affected self-estimated job performance to the highest extent. The present study showed that overall satisfaction...... with personal workspace affected significantly the self-estimated job performance. Increasing overall satisfaction with the personal workspace by about 15% would correspond to an increase of self-estimated job performance by 3.7%. Among indoor environmental parameters and building features, satisfaction...

Evaluation of water quality parameters and associated environmental impact at nuclear power plant sites

International Nuclear Information System (INIS)

Joshi, M.L.; Hegde, A.G.

2005-01-01

The Nuclear Power Plants use a large quantity of water for the purpose of cooling the turbine condenser. The heated effluents are discharged to aquatic environment by means of once through cooling wherever large water bodies like seacoast or fresh water reservoir are available. The quality of water bodies are important for the growth and biodiversity of aquatic organisms. Several environmental factors like Temperature pH, Dissolved Oxygen have a bearing on the life cycle of aquatic organisms. The paper describes the evaluation of water quality parameters at the two typical sites one on the sea coast (Tarapur) and other at inland site Kaiga and discusses the environmental impact due to discharge to aquatic environment. It is found that the environmental impacts due to both heated effluents and radioactivity are insignificant. The water quality parameters are found to be well within the prescribed standards. (author)

Climate change convention

International Nuclear Information System (INIS)

Russell, D.

1992-01-01

Principles that guide Canada's Green Plan with respect to global warming are outlined. These include respect for nature, meeting environmental goals in an economically beneficial manner, efficient use of resources, shared responsibilities, federal leadership, and informed decision making. The policy side of the international Framework Convention on Climate Change is then discussed and related to the Green Plan. The Convention has been signed by 154 nations and has the long-term objective of stabilizing anthropogenic greenhouse gas concentrations in the atmosphere at levels that prevent dangerous interference with the climate system. Some of the Convention's commitments toward achieving that objective are only applicable to the developed countries. Five general areas of commitment are emissions reductions, assistance to developing countries, reporting requirements, scientific and socioeconomic research, and education. The most controversial area is that of limiting emissions. The Convention has strong measures for public accountability and is open to future revisions. Canada's Green Plan represents one country's response to the Convention commitments, including a national goal to stabilize greenhouse gas emissions at the 1990 level by the year 2000

Field-tested technology for gas compression: using high-speed induction motors to replace conventional solutions

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Karina Velloso; Pradurat, Jean Francois [Institut National Polytechnique de Lorraine (INPL), Nancy (France). Converteam Rotating Machines Division

2009-07-01

Industry leaders are all concerned about rationalization of electric power use, increase of efficiency and flexibility, environmental impact, installations size and maintenance efforts diminution. The high-speed induction motors are a good solution when addressing these parameters. How this technology works and how using it can help pipelines operators meet growing operational and environmental challenges is the main subject of this paper, that also explain how it can be used to replace conventional solutions. As a conclusion the future opportunities of electric high-speed drive systems application in production, transport and storage for natural gas industry are going to be discussed. (author)

EXPERIMENTAL INVESTIGATION OF EMISSION AND PERFORMANCE PARAMETERS OF PONGAMIA BIODIESEL AND HHO GAS ADDITION IN A COMPRESSION IGNITION ENGINE

OpenAIRE

Allen Jeffrey.J1, Divya Meena.S2, Balaji.P3, Bharathi.K4, Arvind Raj.R5

2018-01-01

Nowadays the environmental pollution has been increased incredibly by using conventional fuels. To control this increase in pollution alternate fuels has to be used as supplement for conventional fuels. While using conventional fuels such as petrol and diesel in IC engine there is a chance of increase in emissions. Alternate fuels can control emissions. This work is based on the investigation of emission parameters of pongamia biodiesel and HHO gas addition in a CI engine. Pongamia biodiesel ...

Non-invasive measure of respiratory mechanics and conventional respiratory parameters in conscious large animals by high frequency Airwave Oscillometry.

Science.gov (United States)

Bassett, Leanne; Troncy, Eric; Robichaud, Annette; Schuessler, Thomas F; Pouliot, Mylène; Ascah, Alexis; Authier, Simon

2014-01-01

A number of drugs in clinical trials are discontinued due to potentially life-threatening airway obstruction. As some drugs may not cause changes in core battery parameters such as tidal volume (Vt), respiratory rate (RR) or minute ventilation (MV), including measurements of respiratory mechanics in safety pharmacology studies represents an opportunity for design refinement. The present study aimed to test a novel non-invasive methodology to concomitantly measure respiratory system resistance (Rrs) and conventional respiratory parameters (Vt, RR, MV) in conscious Beagle dogs and cynomolgus monkeys. An Airwave Oscillometry system (tremoFlo; THORASYS Inc., Montreal, Canada) was used to concomitantly assess Rrs and conventional respiratory parameters before and after intravenous treatment with a bronchoactive agent. Respiratory mechanics measurements were performed by applying a short (i.e. 16s) single high frequency (19Hz) waveform at the subject's airway opening via a face mask. During measurements, pressure and flow signals were recorded. After collection of baseline measurements, methacholine was administered intravenously to Beagle dogs (n=6) and cynomolgus monkeys (n=4) at 8 and 68μg/kg, respectively. In dogs, methacholine induced significant increases in Vt, RR and MV while in monkeys, it only augmented RR. A significant increase in Rrs was observed after methacholine administration in both species with mean percentage peak increases from baseline of 88 (53)% for dogs and 28 (16)% for cynomolgus monkeys. Airwave Oscillometry appears to be a promising non-invasive methodology to enable respiratory mechanics measurements in conscious large animals, a valuable refinement in respiratory safety pharmacology. Copyright © 2014 Elsevier Inc. All rights reserved.

The environmental impact of coal technology: Politics and methods of achieving an international convention to protect the earth's atmosphere

International Nuclear Information System (INIS)

1992-01-01

Particular attention will be paid to the following points during the international Round Table discussions: Technology transfer and political opportunities for the environmentally-compatible use of coal in developing and transitional countries who rely on coal to meet their energy needs. Supporting this challenge for the international community of coal-based energy conservation in these countries, particularly through development aid. To increasingly accept our collective responsibility for energy considerations and environmental effects, based on a better understanding of the countries' differing limits and obligations in achieving the goal of a convention to protect the earth's atmosphere. (orig.) [de

Volatile Organic Compounds (VOCs in Conventional and High Performance School Buildings in the U.S.

Directory of Open Access Journals (Sweden)

Lexuan Zhong

2017-01-01

Full Text Available Exposure to volatile organic compounds (VOCs has been an indoor environmental quality (IEQ concern in schools and other buildings for many years. Newer designs, construction practices and building materials for “green” buildings and the use of “environmentally friendly” products have the promise of lowering chemical exposure. This study examines VOCs and IEQ parameters in 144 classrooms in 37 conventional and high performance elementary schools in the U.S. with the objectives of providing a comprehensive analysis and updating the literature. Tested schools were built or renovated in the past 15 years, and included comparable numbers of conventional, Energy Star, and Leadership in Energy and Environmental Design (LEED-certified buildings. Indoor and outdoor VOC samples were collected and analyzed by thermal desorption, gas chromatography and mass spectroscopy for 94 compounds. Aromatics, alkanes and terpenes were the major compound groups detected. Most VOCs had mean concentrations below 5 µg/m3, and most indoor/outdoor concentration ratios ranged from one to 10. For 16 VOCs, the within-school variance of concentrations exceeded that between schools and, overall, no major differences in VOC concentrations were found between conventional and high performance buildings. While VOC concentrations have declined from levels measured in earlier decades, opportunities remain to improve indoor air quality (IAQ by limiting emissions from building-related sources and by increasing ventilation rates.

Volatile Organic Compounds (VOCs) in Conventional and High Performance School Buildings in the U.S.

Science.gov (United States)

Zhong, Lexuan; Su, Feng-Chiao; Batterman, Stuart

2017-01-21

Exposure to volatile organic compounds (VOCs) has been an indoor environmental quality (IEQ) concern in schools and other buildings for many years. Newer designs, construction practices and building materials for "green" buildings and the use of "environmentally friendly" products have the promise of lowering chemical exposure. This study examines VOCs and IEQ parameters in 144 classrooms in 37 conventional and high performance elementary schools in the U.S. with the objectives of providing a comprehensive analysis and updating the literature. Tested schools were built or renovated in the past 15 years, and included comparable numbers of conventional, Energy Star, and Leadership in Energy and Environmental Design (LEED)-certified buildings. Indoor and outdoor VOC samples were collected and analyzed by thermal desorption, gas chromatography and mass spectroscopy for 94 compounds. Aromatics, alkanes and terpenes were the major compound groups detected. Most VOCs had mean concentrations below 5 µg/m³, and most indoor/outdoor concentration ratios ranged from one to 10. For 16 VOCs, the within-school variance of concentrations exceeded that between schools and, overall, no major differences in VOC concentrations were found between conventional and high performance buildings. While VOC concentrations have declined from levels measured in earlier decades, opportunities remain to improve indoor air quality (IAQ) by limiting emissions from building-related sources and by increasing ventilation rates.

Comparison of community managed projects and conventional ...

African Journals Online (AJOL)

Comparison of community managed projects and conventional approaches in rural water supply of Ethiopia. ... African Journal of Environmental Science and Technology ... This study aimed to compare Community Managed Projects (CMP) approach with the conventional approaches (Non-CMP) in the case of Ethiopia.

Effect of some environmental parameters on fermentative hydrogen production by Enterobacter cloacae DM11

Energy Technology Data Exchange (ETDEWEB)

Nath, K.; Kumar, A.; Das, D. [Indian Inst. of Technology, Kharagpur (India). Dept. of Biotechnology, Fermentation Technology Laboratory

2006-06-15

This study addressed the issue of using biological systems for hydrogen production as an environmentally sound alternative to conventional thermochemical and electrochemical processes. In particular, it examined the potential for anaerobic fermentation for biological hydrogen production and the possibility of coupling gaseous energy generation with simultaneous treatment of biodegradable waste materials. The study focused on hydrogen production by anaerobic fermentation using Enterobacter cloacae DM11, a Gram-negative, motile facultative anaerobe. Although hydrogen production by these bacteria depends on many environmental parameters, there is very little information on the effects of these factors in the hydrogen production potential of this organism. For that reason, this study examined the effect of initial medium pH, reaction temperature, initial glucose concentration, and iron (Fe2+) concentration on the fermentative production of hydrogen. Fermentative hydrogen production was carried out by Enterobacter cloacae DM11, using glucose as the substrate. Batch cultivations were performed in a 500 ml custom-designed vertical tubular bioreactor. The maximum molar yield of hydrogen was 3.31 mol (mol glucose){sub 1}. The rate and cumulative volume of hydrogen production decreased at higher initial glucose concentration. The pH of 6.5 at a temperature of 37 degrees C was most suitable for maximum rate of production of hydrogen in batch fermentation. The addition of Fe2+ on hydrogen production had a marginal enhancing effect on total hydrogen production. A simple model developed from the modified Gompertz equation was used to fit the cumulative hydrogen production curve and to estimate the hydrogen production potential, maximum production rate, and lag time. It was concluded that these study results could be used in the development of a high rate continuous hydrogen production process. 30 refs., 4 tabs., 3 figs.

International conventions on air pollution abatement. Implementation measures

International Nuclear Information System (INIS)

Adler, S.; Groza, L.

1996-01-01

The environmental protection, the pollution reduction, their positive direct and indirect effects, the energy efficiency increase in using fossil fuels have an important role on the environmental and energy policies, as well as on the long-term planning. The report presents, under the new legislative context, the general frame from the implementation of concrete actions to fulfill the commitments contained in different environmental conventions, in which Romania is or intends to be a part. In this context it is presented the national approach for the implementation of two conventions: the United Nations Framework Convention on Climate Change and the Long-Range Transboundary Air Pollution, this under the United Nations Economic Commission for Europe. The report presents the necessary measures to reduce the emissions of carbon, sulfur and nitrogen oxides taking into account the process of the Romanian integration in the European structure as well as the dynamic of the economic reform. Romania is aware that the necessary environmental activities (research, design, environmental investments etc.) must be financed from internal resources, the own resources of the polluting economic units, the central and local budgets. (author). 7 refs

Implications of the Law of the Sea Convention

International Nuclear Information System (INIS)

Brewer, W.C. Jr.

1989-01-01

This paper reports that protection and preservation of the marine environment from wastes and toxic substances was an early concern of the Third United Nations Conference on the Law of the Sea, and the subject is extensively dealt with in the text of the Convention, adopted on 30 April 1982. The environmental provisions of the Convention are intended to serve as an umbrella treaty that states general goals, delimits the power and geographical jurisdiction of states in dealing with environmental problems, and requires states to cooperate through regional and global organizations in the development of standards. The most complex provisions of the environmental text deal with vessel discharges, reflecting the high degree of public interest in oil pollution, whereas the ocean dumping provisions rely largely on the standards of the London Dumping Convention. Pollution carried by air and rivers and wastes from seabed mining within national jurisdiction are treated briefly. The International Seabed Authority, created elsewhere in the Convention to regulate seabed mining, is granted power to regulate pollution from such mining beyond national jurisdiction. Overall, the most important contribution made by the Law of the Sea Convention to the protection of the marine environment is the obligation of states to bring national marine pollution laws up to global standards

Considering the influence of stimulation parameters on the effect of conventional and high-definition transcranial direct current stimulation.

Science.gov (United States)

To, Wing Ting; Hart, John; De Ridder, Dirk; Vanneste, Sven

2016-01-01

Recently, techniques to non-invasively modulate specific brain areas gained popularity in the form of transcranial direct current stimulation (tDCS) and high-definition transcranial direct current stimulation. These non-invasive techniques have already shown promising outcomes in various studies with healthy subjects as well as patient populations. Despite widespread dissemination of tDCS, there remain significant unknowns about the influence of a diverse number of tDCS parameters (e.g. polarity, size, position of electrodes & duration of stimulation) in inducing neurophysiological and behavioral effects. This article explores both techniques starting with the history of tDCS, to the differences between conventional tDCS and high-definition transcranial direct current stimulation, the underlying physiological mechanism, the (in)direct effects, the applications of tDCS with varying parameters, the efficacy, the safety issues and the opportunities for future research.

Agro-environmental scheme for segetal plant conservation in Wallonia (Belgium: an assessment in conventional and organic fields

Directory of Open Access Journals (Sweden)

Lemoine, C.

2018-01-01

Full Text Available Description of the subject. Segetal plant species are highly threatened in arable land. They are an integral part of agricultural history and biodiversity in Western Europe. In Wallonia (southern Belgium, an agro-environmental scheme (AES has been adopted for their conservation. It consists of strips on a field margin, with at least 60% cereals in crop rotation, and proscribes spraying and fertilisation. Objectives. This paper assessed the impact of an AES on segetal species conservation. Method. In eight organic fields and six conventional fields, a vegetation survey was performed on an AES strip and on a control margin of each field. Evenness, richness, cover and species composition for both total and segetal species were compared between AES strips and their corresponding control margins. Also, a cover of pernicious weeds was considered to be a factor in the rejection of AES by farmers. Results. In conventional agriculture, species richness (total and segetal and cover (total and segetal were higher in the AES than in the respective control; however, pernicious weed cover was also enhanced. In organic fields, total species richness was higher and pernicious weed cover was lower in the AES than in the respective control. Total evenness was higher in organic than in conventional fields, due to the co-dominance of several species. Under the AES, species composition and abundance remained different between conventional and organic fields. In all cases, rare species were hardly found in our survey. Conclusions. AES promote plant diversity in both organic and conventional fields. Sowing AES strips with uncleaned seeds from well-preserved fields, or species introduction, are recommended to enhance rare species recovery.

METHODOLOGY OF THE AUDIT OF ENVIRONMENTAL MANAGEMENT OF THE WETLANDSOF PERÚ WTHIN THE FRAMEWORK OF THE RAMSAR CONVENTION

OpenAIRE

Mogrovejo Espinoza, Martín Edmundo

2014-01-01

The study formulates how the technical/operative alignments of the Ramsar Convention facilitate the implementation of the environmental and audit management methodology of the wetlands of Peru. It’s an investigation on an explanatory level, developed in a sample of five wetlands: Reserva Nacional de Paracas (Ica), Refugio de Vida Silvestre Los Pantanos de Villa (Lima), Santuario Nacional Lagunas de Mejia (Arequipa), Santuario Nacional Manglares de Tumbes (Tumbes) y Reserva Nacional Junín ( Ju...

A study on some welfare-related parameters of hDAF transgenic pigs when compared with their conventional close relatives.

Science.gov (United States)

Martelli, G; Sardi, L; Stancampiano, L; Govoni, N; Zannoni, A; Nannoni, E; Forni, M; Bacci, M L

2014-05-01

Pigs are increasingly used in medical research as transgenic laboratory animals; however, little knowledge is presently available concerning their welfare assessment. The aim of the present study was to investigate some welfare-related parameters of transgenic pigs intended for xenotrasplantation (human decay-accelerating factor (hDAF)) when compared with their conventional (i.e. not transgenic) close relatives (full sibs and half sibs). A total of 14 Large White female transgenic pigs and 10 female non-transgenic (conventional) pigs from four litters were used. All pigs were from the same conventional boar, donor of the semen treated for sperm-mediated gene transfer. During the experiment, BW ranged from 50 to about 80 kg and pigs were weighed at the beginning and at the end of the experiment. Animals were subjected to a set of behavioural tests: a human approach test (HAT), a novel object test (NOT) and an open-door test (ODT). Food preferences were tested through the offer of different foods (banana, apple, carrot, cracker and lemon). During a 4-day period, pigs were diurnally videotaped to study the prevalence of the different behaviours and social interactions (aggressive and non-aggressive interactions). At the end of the trial, cortisol level had been assessed on bristles. No significant differences (P>0.05) were observed between hDAF transgenic and conventional pigs with respect to growth traits, reactivity towards unexpected situations (HAT, NOT, ODT), food preferences, main behavioural traits, social interactions and hair cortisol.

Environmental magnetic studies on some Quaternary sediments of varied depositional settings in the Indian sub-continent

Digital Repository Service at National Institute of Oceanography (India)

Sangode, S.J.; Sinha, R.; Phartiyal, B.; Chauhan, O.S.; Mazari, R.K.; Bagati, T.N.; Suresh, N.; Mishra, S.; Kumar, R.; Bhattacharjee, P.

susceptibility, high field hysteresis parameters and their ratios and bivariate plots. Besides applying the conventional models, new and multi-parametric environmental magnetic models for finer discrimination of the mineral magnetic assemblages (MMA) amongst...

Recommended environmental dose calculation methods and Hanford-specific parameters. Revision 2

Energy Technology Data Exchange (ETDEWEB)

Schreckhise, R.G.; Rhoads, K.; Napier, B.A.; Ramsdell, J.V. [Pacific Northwest Lab., Richland, WA (United States); Davis, J.S. [Westinghouse Hanford Co., Richland, WA (United States)

1993-03-01

This document was developed to support the Hanford Environmental Dose overview Panel (HEDOP). The Panel is responsible for reviewing all assessments of potential doses received by humans and other biota resulting from the actual or possible environmental releases of radioactive and other hazardous materials from facilities and/or operations belonging to the US Department of Energy on the Hanford Site in south-central Washington. This document serves as a guide to be used for developing estimates of potential radiation doses, or other measures of risk or health impacts, to people and other biota in the environs on and around the Hanford Site. It provides information to develop technically sound estimates of exposure (i.e., potential or actual) to humans or other biotic receptors that could result from the environmental transport of potentially harmful materials that have been, or could be, released from Hanford operations or facilities. Parameter values and information that are specific to the Hanford environs as well as other supporting material are included in this document.

Development of computer program ENMASK for prediction of residual environmental masking-noise spectra, from any three independent environmental parameters

Energy Technology Data Exchange (ETDEWEB)

Chang, Y.-S.; Liebich, R. E.; Chun, K. C.

2000-03-31

Residual environmental sound can mask intrusive4 (unwanted) sound. It is a factor that can affect noise impacts and must be considered both in noise-impact studies and in noise-mitigation designs. Models for quantitative prediction of sensation level (audibility) and psychological effects of intrusive noise require an input with 1/3 octave-band spectral resolution of environmental masking noise. However, the majority of published residual environmental masking-noise data are given with either octave-band frequency resolution or only single A-weighted decibel values. A model has been developed that enables estimation of 1/3 octave-band residual environmental masking-noise spectra and relates certain environmental parameters to A-weighted sound level. This model provides a correlation among three environmental conditions: measured residual A-weighted sound-pressure level, proximity to a major roadway, and population density. Cited field-study data were used to compute the most probable 1/3 octave-band sound-pressure spectrum corresponding to any selected one of these three inputs. In turn, such spectra can be used as an input to models for prediction of noise impacts. This paper discusses specific algorithms included in the newly developed computer program ENMASK. In addition, the relative audibility of the environmental masking-noise spectra at different A-weighted sound levels is discussed, which is determined by using the methodology of program ENAUDIBL.

Satisfaction and self-estimated performance in relation to indoor environmental parameters and building features

DEFF Research Database (Denmark)

Wargocki, Pawel; Frontczak, Monika; Schiavon, Stefano

2012-01-01

The paper examines how satisfaction with indoor environmental parameters and building features affects satisfaction and self-estimated job performance. The analyses used subjective responses from around 50, 000 occupants collected mainly in US office buildings using a web-based survey administered...

Comparison of effects of machine performance parameters and energy indices of soybean production in conservation and conventional tillage systems

Directory of Open Access Journals (Sweden)

A Sharifi

2016-09-01

Full Text Available Introduction Nowadays, agricultural systems are seeking economic, ecological and bioenvironmental goals for production of agricultural crops with protection and sustainability of the environment. Therefore, there is need to extend sustainable agricultural systems such as conservation agriculture. One of the principles of conservation agriculture is conservation tillage. Conservation tillage is a kind of tillage that retains crop residues on the soil surface or mixes it with soil using related machines. It could also affect on machine performance parameters. Energy consumption for producing one kilogram crop could be studied for conservation tillage. Several researchers have conducted studies on this issue for production of different crops including wheat, sunflower and forage crops. This study conducted to assess machine performance parameters and energy indices of conservation tillage systems for soybean cultivation in Golestan province. Materials and Methods This study was conducted to investigate the effects of conservation tillage systems on machine performance and energy indices in soybean production at the Gorgan research station of Golestan Agricultural and Natural Resource Research Center in 2012. The precipitation was 450 mm. Soil texture was silty clay loam. Treatments were four tillage methods, including no-till using row crop direct planter, no-till using grain direct drill, conventional tillage usin a disk harrow with working depth of 10-15 cm and minimum tillage using chisel packer with a working depth of 20 cm. Machine performance parameters and energy indices studied in a farm covered by wheat residues in a randomized complete block design (RCBD with four treatments and four replications. Machine performance parameters consisted of field efficiency, field capacity, total field capacity and planting uniformity index were measured. Energy indices such as energy ratio, energy productivity, energy intensity and net energy gain were

Global climate convention

International Nuclear Information System (INIS)

Simonis, U.E.

1991-01-01

The effort of negotiate a global convention on climate change is one of mankind's great endeavours - and a challenge to economists and development planners. The inherent linkages between climate and the habitability of the earth are increasingly well recognized, and a convention could help to ensure that conserving the environment and developing the economy in the future must go hand in hand. Due to growing environmental concern the United Nations General Assembly has set into motion an international negotiating process for a framework convention on climate change. One the major tasks in these negotiations is how to share the duties in reducing climate relevant gases, particularly carbon dioxide (CO 2 ), between the industrial and the developing countries. The results and proposals could be among the most far-reaching ever for socio-economic development, indeed for global security and survival itself. While the negotiations will be about climate and protection of the atmosphere, they will be on fundamental global changes in energy policies, forestry, transport, technology, and on development pathways with low greenhouse gas emissions. Some of these aspects of a climate convention, particularly the distributional options and consequences for the North-South relations, are addressed in this chapter. (orig.)

Is the Grass Always Greener? Comparing the Environmental Impact of Conventional, Natural and Grass-Fed Beef Production Systems

Directory of Open Access Journals (Sweden)

Judith L. Capper

2012-04-01

Full Text Available This study compared the environmental impact of conventional, natural and grass-fed beef production systems. A deterministic model based on the metabolism and nutrient requirements of the beef population was used to quantify resource inputs and waste outputs per 1.0 × 109 kg of hot carcass weight beef in conventional (CON, natural (NAT and grass-fed (GFD production systems. Production systems were modeled using characteristic management practices, population dynamics and production data from U.S. beef production systems. Increased productivity (slaughter weight and growth rate in the CON system reduced the cattle population size required to produce 1.0 × 109 kg of beef compared to the NAT or GFD system. The CON system required 56.3% of the animals, 24.8% of the water, 55.3% of the land and 71.4% of the fossil fuel energy required to produce 1.0 × 109 kg of beef compared to the GFD system. The carbon footprint per 1.0 × 109 kg of beef was lowest in the CON system (15,989 × 103 t, intermediate in the NAT system (18,772 × 103 t and highest in the GFD system (26,785 × 103 t. The challenge to the U.S beef industry is to communicate differences in system environmental impacts to facilitate informed dietary choice.

Chlorination pattern effect on thermodynamic parameters and environmental degradability for C₁₀-SCCPs: Quantum chemical calculation based on virtual combinational library.

Science.gov (United States)

Sun, Yuzhen; Pan, Wenxiao; Lin, Yuan; Fu, Jianjie; Zhang, Aiqian

2016-01-01

Short-chain chlorinated paraffins (SCCPs) are still controversial candidates for inclusion in the Stockholm Convention. The inherent mixture nature of SCCPs makes it rather difficult to explore their environmental behaviors. A virtual molecule library of 42,720 C10-SCCP congeners covering the full structure spectrum was constructed. We explored the structural effects on the thermodynamic parameters and environmental degradability of C10-SCCPs through semi-empirical quantum chemical calculations. The thermodynamic properties were acquired using the AM1 method, and frontier molecular orbital analysis was carried out to obtain the E(HOMO), E(LUMO) and E(LUMO)-E(HOMO) for degradability exploration at the same level. The influence of the chlorination degree (N(Cl)) on the relative stability and environmental degradation was elucidated. A novel structural descriptor, μ, was proposed to measure the dispersion of the chlorine atoms within a molecule. There were significant correlations between thermodynamic values and N(Cl), while the reported N(Cl)-dependent pollution profile of C10-SCCPs in environmental samples was basically consistent with the predicted order of formation stability of C10-SCCP congeners. In addition, isomers with large μ showed higher relative stability than those with small μ. This could be further verified by the relationship between μ and the reactivity of nucleophilic substitution and OH attack respectively. The C10-SCCP congeners with less Cl substitution and lower dispersion degree are susceptible to environmental degradation via nucleophilic substitution and hydroxyl radical attack, while direct photolysis of C10-SCCP congeners cannot readily occur due to the large E(LUMO)-E(HOMO) values. The chlorination effect and the conclusions were further checked with appropriate density functional theory (DFT) calculations. Copyright © 2015. Published by Elsevier B.V.

Headache symptoms and indoor environmental parameters: Results from the EPA BASE study

Directory of Open Access Journals (Sweden)

Gretchen E Tietjen

2012-01-01

Full Text Available Objective: The objective of this investigation was to determine the prevalence of migraine and headache symptoms in a national sample of US office employees. Also, we explored the association of headache symptoms with indoor environmental parameters of the work place. Background: Sick building syndrome (SBS, which includes headache, is a common global phenomenon, but the underlying environmental cause is uncertain. Materials and Methods: We used data from the 1994-1998 US Environmental Protection Agency′s (EPA Building Assessment and Survey Evaluation, a cross-sectional study of workers employed in 100 public and private office buildings across 25 states. The study used a self-administered questionnaire to assess headache frequency and prevalence of self-reported physician-diagnosed (SRPD migraine. Indoor environmental parameters (IEP were collected per EPA protocol from each building over a 1-week period and included carbon dioxide, carbon monoxide, temperature, relative humidity, particulate matter, volatile organic compound, illuminance, and sound level. The standards of American Society of Heating, Refrigerating and Air Conditioning Engineers were used to categorize IEP as either within- or out-of-comfort range for human dwelling. These limits delineate whether a parameter value is safe for human dwelling. Out-of-comfort range IEPs are associated with SBS and other human diseases. SRPD migraine and headache frequency were the primary outcome measures of the study. Multivariate logistic regression analyses were employed for the purpose of assessing the association between the outcome variable and IEPs. Results: Of the 4326 participants, 66% were females and 60% were between 30 and 49 years. Headache frequency during the last 4 weeks was as follows: None in 31%, 1-3 days in 38%, 1-3 days per week in 18%, and every or almost every workday in 8%. Females had higher SRPD migraine prevalence compared to males (27% vs. 11%, P<0.001 and were more

Human comfort and self-estimated performance in relation to indoor environmental parameters and building features

OpenAIRE

Frontczak, Monika Joanna; Wargocki, Pawel

2011-01-01

The main objective of the Ph.D. study was to examine occupants’ perception of comfort and self-estimated job performance in non-industrial buildings (homes and offices), in particular how building occupants understand comfort and which parameters, not necessarily related to indoor environments, influence the perception of comfort.To meet the objective, the following actions were taken: (1) a literature survey exploring which indoor environmental parameters (thermal, acoustic, visualenvironmen...

Preliminary study of environmental parameters associated with the feasibility of a polygeneration plant at Kennedy Space Center

International Nuclear Information System (INIS)

Barnes, G.D.

1982-01-01

The feasibility of a polygeneration plant at Kennedy Space Center was studied. Liquid hydrogen and gaseous nitrogen are the two principal products in consideration. Environmental parameters (air quality, water quality, biological diversity and hazardous waste disposal) necessary for the feasibility study were investigated. A National Environmental Policy Act (NEPA) project flow sheet was to be formulated for the environmental impact statement. Water quality criteria for Florida waters were to be established

Model calibration and parameter estimation for environmental and water resource systems

CERN Document Server

Sun, Ne-Zheng

2015-01-01

This three-part book provides a comprehensive and systematic introduction to the development of useful models for complex systems. Part 1 covers the classical inverse problem for parameter estimation in both deterministic and statistical frameworks, Part 2 is dedicated to system identification, hyperparameter estimation, and model dimension reduction, and Part 3 considers how to collect data and construct reliable models for prediction and decision-making. For the first time, topics such as multiscale inversion, stochastic field parameterization, level set method, machine learning, global sensitivity analysis, data assimilation, model uncertainty quantification, robust design, and goal-oriented modeling, are systematically described and summarized in a single book from the perspective of model inversion, and elucidated with numerical examples from environmental and water resources modeling. Readers of this book will not only learn basic concepts and methods for simple parameter estimation, but also get famili...

Parameters used in the environmental pathways (DESCARTES) and radiological dose (CIDER) modules of the Hanford Environmental Dose Reconstruction Integrated Codes (HEDRIC) for the air pathway. Hanford Environmental Dose Reconstruction Project

Energy Technology Data Exchange (ETDEWEB)

Snyder, S.F.; Farris, W.T.; Napier, B.A.; Ikenberry, T.A.; Gilbert, R.O.

1992-09-01

This letter report is a description of work performed for the Hanford Environmental Dose Reconstruction (HEDR) Project. The HEDR Project was established to estimate the radiation doses to individuals resulting from releases of radionuclides from the Hanford Site since 1944. This work is being done by staff at Battelle, Pacific Northwest Laboratories (Battelle) under a contract with the Centers for Disease Control (CDC) with technical direction provided by an independent Technical Steering Panel (TSP). The objective of this report is to-document the environmental accumulation and dose-assessment parameters that will be used to estimate the impacts of past Hanford Site airborne releases. During 1993, dose estimates made by staff at Battelle will be used by the Fred Hutchinson Cancer Research Center as part of the Hanford Thyroid Disease Study (HTDS). This document contains information on parameters that are specific to the airborne release of the radionuclide iodine-131. Future versions of this document will include parameter information pertinent to other pathways and radionuclides.

Determinatıon of Some Genetic Parameters, Phenotypic, Genetic and Environmental Trends and Environmental Factors Affecting Milk Yield Traits of Brown Swiss Cattle

Directory of Open Access Journals (Sweden)

Muhammet Hanifi Selvi

2016-01-01

Full Text Available In this study, genetic parameters, macro environmental factors and genetic, phenotypic and environmental trends for actual and 305 day milk yield of Brown Swiss cattle reared in Research Farm of Agricultural College at Atatürk University were estimated. Estimated breeding values that were used for calculation of the genetic trend and genetic parameters were estimated by using MTDFREML computer package program. Environmental factors affecting on actual and 305day milk yields were analysed by using Harvey statistic package program. While effects of the years and parities on the actual and 305-day milk yields were highly significant, the influence of the calving season was found to be insignificant. Environmental and phenotypic trends for actual and 305-day milk yields were determined as -33.2 kg and -29.0 kg; and -27.8±19.1 kg/year and -25.9±8.7 kg/year respectively. Genetic trends for actual and 305-day milk yields were calculated as 5.4±3.8 kg and 3.1±3.4 kg. Heritability’s for actual and 305-day milk yields were 0.21±0.12 and 0.16±0.14 respectively. Repeatability values for actual and 305-day milk yield were found as 0.29 and 0.33 respectively.

Influence of short-term sampling parameters on the uncertainty of the Lden environmental noise indicator

International Nuclear Information System (INIS)

Mateus, M; Carrilho, J Dias; Da Silva, M Gameiro

2015-01-01

The present study deals with the influence of the sampling parameters on the uncertainty of noise equivalent level in environmental noise measurements. The study has been carried out through the test of different sampling strategies doing resampling trials over continuous monitoring noise files obtained previously in an urban location in the city of Coimbra, in Portugal. On short term measurements, not only the duration of the sampling episodes but also its number have influence on the uncertainty of the result. This influence is higher for the time periods where sound levels suffer a greater variation, such as during the night period. In this period, in case both parameters (duration and number of sampling episodes) are not carefully selected, the uncertainty level can reach too high values contributing to a loss of precision of the measurements. With the obtained data it was investigated the sampling parameters influence on the long term noise indicator uncertainty, calculated according the Draft 1st CD ISO 1996-2:2012 proposed method. It has been verified that this method allows the possibility of defining a general methodology which enables the setting of the parameters once the precision level is fixed. For the three reference periods defined for environmental noise (day, evening and night), it was possible to derive a two variable power law representing the uncertainty of the determined values as a function of the two sampling parameters: duration of sampling episode and number of episodes

ENVIRONMENTAL AND PROCESS PARAMETERS OF METHANE FERMENTATION IN CONTINUOSLY STIRRED TANK REACTOR (CSTR

Directory of Open Access Journals (Sweden)

Kamil Kozłowski

2016-12-01

Full Text Available A key indicator of methane fermentation process which influences the cost-effectiveness of the biogas plant is efficient production of methane per 1 m3 of reactor. It depends on the proper selection of environmental and process parameters. This article present collected and analyzed the effect of the most important parameters of continuous methane fermentation (CSTR, which include temperature, pH, nutrient content and the C/N ratio in the feed medium, the presence of inhibitors, and the volume load of reactor, retention time and mixing of digestion reactor. Still, the impact of many factors remain unknown, hence there is a need for more comprehensive studies.

A review of Environmental Impact Assessment parameters required for set up of a hydropower project

International Nuclear Information System (INIS)

Roy, Pankaj Kumar; Mazumdar, Asis

2013-01-01

Environmental Impact Assessment in general, hydro-meteorological conditions, topography, hydrology, water availability analysis of a river system, importance of hydropower and feasibility study of Environmental Impact assessment due to the construction of the hydropower plant have been discussed in this research work. The site selection is one of the major components so far the hydropower is concerned and also the minimum flow should have known to us so that the capacity of a hydropower plant can be predicted. The sustainable flow, which refers the flow is available throughout the year, has been calculated based on flow duration curve. This study highlights the environmental impact assessment particularly related to hydropower project. Here the study area a district town located in the eastern region of India on the banks of river Kosi has been considered. The historical rainfall and the river discharge data have been collected from various organizations. The stage-discharge correlation and hydrological parameters related to hydropower have been analyzed and also to discuss the review of environmental impact assessment in hydropower project. The EIA analysis can be also carried out by using fuzzy logic wherein the EIA parameters can be given different weight-age based on the various survey reports that have been carried out at different places at different time. Such analysis has also been provided below based on the various data obtained.

Influence of health and environmental information on hedonic evaluation of organic and conventional bread.

Science.gov (United States)

Annett, L E; Muralidharan, V; Boxall, P C; Cash, S B; Wismer, W V

2008-05-01

Grain from paired samples of the hard red spring wheat cultivar "Park" grown on both conventionally and organically managed land was milled and baked into 60% whole wheat bread. Consumers (n= 384) rated their liking of the bread samples on a 9-point hedonic scale before (blind) and after (labeled) receiving information about organic production. Consumers liked organic bread more (P bread under blind and labeled conditions. Environmental information about organic production did not impact consumer preference changes for organic bread, but health information coupled with sensory evaluation increased liking of organic bread. Ordinary least squares (OLS) and binary response (probit) regression models identified that postsecondary education, income level, frequency of bread consumption, and proenvironmental attitudes played a significant role in preference changes for organic bread. The techniques used in this study demonstrate that a combination of sensory and econometric techniques strengthens the evaluation of consumer food choice.

Cycling of conventional power plants: Technical limits and actual costs

International Nuclear Information System (INIS)

Van den Bergh, Kenneth; Delarue, Erik

2015-01-01

Highlights: • Literature reports a wide range of cycling parameters (technical and cost-related). • The impact of different cycling parameters is assessed. • The German 2013 system is studied as a case study. • Even for stringent parameters, the dynamic limit of the portfolio is not reached. • Cycling costs can be reduced with 40% when taken into account in the scheduling. - Abstract: Cycling of conventional generation units is an important source of operational flexibility in the electricity generation system. Cycling is changing the power output of conventional units by means of ramping and switching (starting up and shutting down). In the literature, a wide range of technical and cost-related cycling parameters can be found. Different studies allocate different cycling parameters to similar generation units. This paper assesses the impact of different cycling parameters allocated to a conventional generation portfolio. Both the technical limitations of power plants and all costs related to cycling are considered. The results presented in this paper follow from a unit commitment model, used for a case study based on the German 2013 system. The conventional generation portfolio has to deliver different residual load time series, corresponding to different levels of renewables penetration. The study shows, under the assumptions made, that although the dynamic limits of some units are reached, the limits of the conventional generation portfolio as a whole are not reached, even if stringent dynamic parameters are assigned to the generation portfolio and a highly variable residual load is imposed to the system. The study shows also the importance of including full cycling costs in the unit commitment scheduling. The cycling cost can be reduced by up to 40% when fully taken into account

Parameters used in the environmental pathways (DESCARTES) and radiological dose (CIDER) modules of the Hanford Environmental Dose Reconstruction Integrated Codes (HEDRIC) for the air pathway

Energy Technology Data Exchange (ETDEWEB)

Snyder, S.F.; Farris, W.T.; Napier, B.A.; Ikenberry, T.A.; Gilbert, R.O.

1992-09-01

This letter report is a description of work performed for the Hanford Environmental Dose Reconstruction (HEDR) Project. The HEDR Project was established to estimate the radiation doses to individuals resulting from releases of radionuclides from the Hanford Site since 1944. This work is being done by staff at Battelle, Pacific Northwest Laboratories (Battelle) under a contract with the Centers for Disease Control (CDC) with technical direction provided by an independent Technical Steering Panel (TSP). The objective of this report is to-document the environmental accumulation and dose-assessment parameters that will be used to estimate the impacts of past Hanford Site airborne releases. During 1993, dose estimates made by staff at Battelle will be used by the Fred Hutchinson Cancer Research Center as part of the Hanford Thyroid Disease Study (HTDS). This document contains information on parameters that are specific to the airborne release of the radionuclide iodine-131. Future versions of this document will include parameter information pertinent to other pathways and radionuclides.

Parameters used in the environmental pathways (DESCARTES) and radiological dose (CIDER) modules of the Hanford Environmental Dose Reconstruction Integrated Codes (HEDRIC) for the air pathway

International Nuclear Information System (INIS)

Snyder, S.F.; Farris, W.T.; Napier, B.A.; Ikenberry, T.A.; Gilbert, R.O.

1992-09-01

This letter report is a description of work performed for the Hanford Environmental Dose Reconstruction (HEDR) Project. The HEDR Project was established to estimate the radiation doses to individuals resulting from releases of radionuclides from the Hanford Site since 1944. This work is being done by staff at Battelle, Pacific Northwest Laboratories (Battelle) under a contract with the Centers for Disease Control (CDC) with technical direction provided by an independent Technical Steering Panel (TSP). The objective of this report is to-document the environmental accumulation and dose-assessment parameters that will be used to estimate the impacts of past Hanford Site airborne releases. During 1993, dose estimates made by staff at Battelle will be used by the Fred Hutchinson Cancer Research Center as part of the Hanford Thyroid Disease Study (HTDS). This document contains information on parameters that are specific to the airborne release of the radionuclide iodine-131. Future versions of this document will include parameter information pertinent to other pathways and radionuclides

Environmental impacts from the EPSPEX-system. Part 2: Conventional Twinpipes or EPSPEX for District Heat Distribution - Which is best from an Environmental Standpoint?; Miljoebelastning fraan EPSPEX-systemet. Del 2: Konventionella Twinroer eller EPSPEX foer Fjaerrvaermedistribution - Vad aer baest ur Miljoesynpunkt?

Energy Technology Data Exchange (ETDEWEB)

Johansson, Kristin; Olsson, A. Maria; Froeling, Morgan [Chalmers Univ. of Technology, Goeteborg (Sweden). Dept. of Chemical Environmental Science

2005-07-15

In this study the life-cycle environmental impacts from an EPSPEX system for distribution of district heat (a four-pipe system with centrally generated hot tap water) are compared with the environmental impacts of a twin-pipe system with steel media pipes, if installed in the same area. A life cycle assessment of the EPSPEX system constructed in Vraaen, Vaernamo, Sweden, has been reported in FVF-FOU--2005-20. In that study the question was raised of how the EPSPEX system compares with a conventional twin-pipe system with polyurethane-insulated steel media pipes. In the present study the EPSPEX system in Vraaen is compared with a hypothetical construction of a conventional twin pipe system in the same area. Two different fuel mixes for district heat generation have been studied to increase the understanding of the environmental performance of district heat distribution systems; the fuel mix used in Vraaen (heat delivered from Vaernamo Energi) and Swedish average district heat. How media pipes from the two different materials (PEX and steel) compare is discussed in a separate part. There are technical differences that must be kept in mind when the systems are compared in this way. The EPSPEX system is designed for low-pressure district heat systems and could only be used in such context. It is unadvisable to install the EPSPEX system below the ground water table; this is not a restriction for the twin pipe system. Under the conditions of this study the environmental performance of the EPSPEX system is better than the twin pipe system. The heat loss from the EPSPEX system is approximately 60% of the heat loss for a comparable twin pipe system. This is caused by a combination of thick insulation for the EPSPEX system and the possibility to summertime shut down the district heating circuit for this system and only use the hot tap-water circuit. Note, however, that the heat loss from the EPSPEX system is more uncertain compared to the twin-pipe system. From the

Effects of organic versus conventional management on chemical and biological parameters in agricultural soils

NARCIS (Netherlands)

Diepeningen, van A.D.; Vos, de O.J.; Korthals, G.W.; Bruggen, van A.H.C.

2006-01-01

A comparative study of organic and conventional arable farming systems was conducted in The Netherlands to determine the effect of management practices on chemical and biological soil properties and soil health. Soils from thirteen accredited organic farms and conventionally managed neighboring

Implementation of the Aarhus convention - A survey

Directory of Open Access Journals (Sweden)

Marina Malis Sazdovska

2016-11-01

Full Text Available Legislation on global and regional level in the field of environmental protection is characterized by the adoption of international conventions and agreements that attempt to regulate this matter legally. As an extremely important area, which exceeds the boundaries of nation-state and as a global environmental problem, the issues of environmental protection are a major concern to international organizations. It is directly linked to reducing the jurisdiction of the States and transfer of competences to international organizations and institutions in order to solve the problems in a global experience. In order to overcome the problems regarding the implementation of international documents, the creation of certain policies by international organizations and institutions is required to promote the idea of environmental protection as a basic mo$ o of the global world. Taking into account the recommendations of Brundtland Commission, humanity has a moral obligation to preserve natural resources for future generations. Main objective of this article is the presentation of research on the implementation of the Aarhus Convention and the proposal of measures for the creation of ideas and policies on improving access to information in the field. The research is done with the students from the faculty of Security which accessed the information in environmental matters.

Aquatic environmental assessment of Lake Balaton in the light of physical-chemical water parameters.

Science.gov (United States)

Sebestyén, Vitkor; Németh, József; Juzsakova, Tatjana; Domokos, Endre; Kovács, Zsófia; Rédey, Ákos

2017-11-01

One of the issues of the Hungarian Water Management Strategy is the improvement and upgrading of the water of Lake Balaton. The Water Framework Directive (WFD) specifies and sets forth the achievement of the good ecological status. However, the assessment of the water quality of the lake as a complex system requires a comprehensive monitoring and evaluation procedure. Measurements were carried out around the Lake Balaton at ten different locations/sites and 13 physical-chemical parameters were monitored at each measurement site.For the interpretation of the water chemistry parameters the Aquatic Environmental Assessment (AEA) method devised by authors was used for the water body of the Lake Balaton. The AEA method can be used for all types of the water bodies since it is flexible and using individual weighting procedure for the water chemistry parameters comprehensive information can be obtain. The AEA method was compared with existing EIA methods according to a predefined criterion system and proved to be the most suitable tool for evaluating the environmental impacts in our study.On the basis of the results it can be concluded that the status of the quality of studied area on the Lake Balaton can be categorized as proper quality (from the outcome of the ten measurement sites this conclusion was reached at seven sites).

IAEA supports regional seas conventions and action plans

International Nuclear Information System (INIS)

2000-01-01

The document informs about the 3rd Global Meeting of Regional Seas Conventions and Action Plans held in Monaco in November 2000 at the IAEA's Marine Environmental Laboratory (IAEA-MEL). The meeting assembled a number of marine environmental experts from several UN bodies to reinforce activities to protect the marine environment

An Investigation of the dependence of CMS RPC operation on environmental parameters

Energy Technology Data Exchange (ETDEWEB)

Assran, Y. [Faculty of Petroleum and Mining Eng., Suez Canal University (Egypt); Colafranceschi, S. [INFN Laboratori Nazionali di Frascati, Via E. Fermi 40, I-00044 Frascati (Italy); Doninck, W.A. [Vrije Universiteit Brussel, B-1050 Brussels (Belgium); Sharma, A. [CERN, CH-1211, Geneva (Switzerland); Wickramage, N., E-mail: nwickram@cern.ch [EHEP, Tata Institute of Fundamental Research, Mumbai (India)

2011-06-15

In this paper an analysis is presented on performance of RPC chambers installed in the cosmic ray test stand at ISR, CERN. The currents of RPC chambers are studied as a function of environmental parameters such as temperature, humidity and pressure, which are important for the operation of the RPC detector system at CMS. A neural network approach has been used to analyze the data and to build a model using experimental measurements and combining the results of the simulations.

Removal of antibiotics in conventional and advanced wastewater treatment: implications for environmental discharge and wastewater recycling.

Science.gov (United States)

Watkinson, A J; Murby, E J; Costanzo, S D

2007-10-01

Removal of 28 human and veterinary antibiotics was assessed in a conventional (activated sludge) and advanced (microfiltration/reverse osmosis) wastewater treatment plant (WWTP) in Brisbane, Australia. The dominant antibiotics detected in wastewater influents were cephalexin (med. 4.6 microg L(-1), freq. 100%), ciprofloxacin (med. 3.8 microg L(-1), freq. 100%), cefaclor (med. 0.5 microg L(-1), freq. 100%), sulphamethoxazole (med. 0.36 microg L(-1), freq. 100%) and trimethoprim (med. 0.34 microg L(-1), freq. 100%). Results indicated that both treatment plants significantly reduced antibiotic concentrations with an average removal rate from the liquid phase of 92%. However, antibiotics were still detected in both effluents from the low-to-mid ng L(-1) range. Antibiotics detected in effluent from the activated sludge WWTP included ciprofloxacin (med. 0.6 microg L(-1), freq. 100%), sulphamethoxazole (med. 0.27 microg L(-1), freq. 100%) lincomycin (med. 0.05 microg L(-1), freq. 100%) and trimethoprim (med. 0.05 microg L(-1), freq. 100%). Antibiotics identified in microfiltration/reverse osmosis product water included naladixic acid (med. 0.045 microg L(-1), freq. 100%), enrofloxacin (med. 0.01 microg L(-1), freq. 100%), roxithromycin (med. 0.01 microg L(-1), freq. 100%), norfloxacin (med. 0.005 microg L(-1), freq. 100%), oleandomycin (med. 0.005 microg L(-1), freq. 100%), trimethoprim (med. 0.005 microg L(-1), freq. 100%), tylosin (med. 0.001 microg L(-1), freq. 100%), and lincomycin (med. 0.001 microg L(-1), freq. 66%). Certain traditional parameters, including nitrate concentration, conductivity and turbidity of the effluent were assessed as predictors of total antibiotic concentration, however only conductivity demonstrated any correlation with total antibiotic concentration (p=0.018, r=0.7). There is currently a lack of information concerning the effects of these chemicals to critically assess potential risks for environmental discharge and water recycling.

Life cycle models of conventional and alternative-fueled automobiles

Science.gov (United States)

Maclean, Heather Louise

This thesis reports life cycle inventories of internal combustion engine automobiles with feasible near term fuel/engine combinations. These combinations include unleaded gasoline, California Phase 2 Reformulated Gasoline, alcohol and gasoline blends (85 percent methanol or ethanol combined with 15 percent gasoline), and compressed natural gas in spark ignition direct and indirect injection engines. Additionally, I consider neat methanol and neat ethanol in spark ignition direct injection engines and diesel fuel in compression ignition direct and indirect injection engines. I investigate the potential of the above options to have a lower environmental impact than conventional gasoline-fueled automobiles, while still retaining comparable pricing and consumer benefits. More broadly, the objective is to assess whether the use of any of the alternative systems will help to lead to the goal of a more sustainable personal transportation system. The principal tool is the Economic Input-Output Life Cycle Analysis model which includes inventories of economic data, environmental discharges, and resource use. I develop a life cycle assessment framework to assemble the array of data generated by the model into three aggregate assessment parameters; economics, externalities, and vehicle attributes. The first step is to develop a set of 'comparable cars' with the alternative fuel/engine combinations, based on characteristics of a conventional 1998 gasoline-fueled Ford Taurus sedan, the baseline vehicle for the analyses. I calculate the assessment parameters assuming that these comparable cars can attain the potential thermal efficiencies estimated by experts for each fuel/engine combination. To a first approximation, there are no significant differences in the assessment parameters for the vehicle manufacture, service, fixed costs, and the end-of-life for any of the options. However, there are differences in the vehicle operation life cycle components and the state of technology

Effect of farming systems on the yield, quality parameters and sensory properties of conventionally and organically grown potato (Solanum tuberosum L.) tubers.

Science.gov (United States)

Brazinskiene, V; Asakaviciute, R; Miezeliene, A; Alencikiene, G; Ivanauskas, L; Jakstas, V; Viskelis, P; Razukas, A

2014-02-15

The objectives of this two-year research were to study the impact of two different farming types, conventional and organic, on the yield and sensory properties of five Lithuanian varieties of potato tuber. The parameters and properties examined were: phenolic acids; dry matter and starch content; and the spread and intensity of Phytophthora infestans growth. It was determined that potato yield fluctuates with the variety, but for conventional farming it is significantly (p0.05) on the content of phenolic acids. No significant effect (p>0.05) of farming type on dry matter and starch content, or sensory properties was found. No significant relation (p>0.05) was found between the content of phenolic acids and P. infestans spread. The spread of P. infestans was faster and infection was heavier in organically grown potatoes. Copyright © 2013 Elsevier Ltd. All rights reserved.

CT-guided intracavitary radiotherapy for cervical cancer: Comparison of conventional point A plan with clinical target volume-based three-dimensional plan using dose-volume parameters

International Nuclear Information System (INIS)

Shin, Kyung Hwan; Kim, Tae Hyun; Cho, Jung Keun; Kim, Joo-Young; Park, Sung Yong; Park, Sang-Yoon; Kim, Dae Yong; Chie, Eui Kyu; Pyo, Hong Ryull; Cho, Kwan Ho

2006-01-01

Purpose: To perform an intracavitary radiotherapy (ICR) plan comparison between the conventional point A plan (conventional plan) and computed tomography (CT)-guided clinical target volume-based plan (CTV plan) by analysis of the quantitative dose-volume parameters and irradiated volumes of organs at risk in patients with cervical cancer. Methods and Materials: Thirty plans for 192 Ir high-dose-rate ICR after 30-40-Gy external beam radiotherapy were investigated. CT images were acquired at the first ICR session with artifact-free applicators in place. The gross tumor volume, clinical target volume (CTV), point A, and International Commission on Radiation Units and Measurements Report 38 rectal and bladder points were defined on reconstructed CT images. A fractional 100% dose was prescribed to point A in the conventional plan and to the outermost point to cover all CTVs in the CTV plan. The reference volume receiving 100% of the prescribed dose (V ref ), and the dose-volume parameters of the coverage index, conformal index, and external volume index were calculated from the dose-volume histogram. The bladder, rectal point doses, and percentage of volumes receiving 50%, 80%, and 100% of the prescribed dose were also analyzed. Results: Conventional plans were performed, and patients were categorized on the basis of whether the 100% isodose line of point A prescription dose fully encompassed the CTV (Group 1, n = 20) or not (Group 2, n = 10). The mean gross tumor volume (11.6 cm 3 ) and CTV (24.9 cm 3 ) of Group 1 were smaller than the corresponding values (23.7 and 44.7 cm 3 , respectively) for Group 2 (p = 0.003). The mean V ref for all patients was 129.6 cm 3 for the conventional plan and 97.0 cm 3 for the CTV plan (p = 0.003). The mean V ref in Group 1 decreased markedly with the CTV plan (p < 0.001). For the conventional and CTV plans in all patients, the mean coverage index, conformal index, and external volume index were 0.98 and 1.0, 0.23 and 0.34, and 3.86 and

Beyond the conventional life cycle inventory in wastewater treatment plants

Energy Technology Data Exchange (ETDEWEB)

Lorenzo-Toja, Yago, E-mail: yago.lorenzo@usc.es [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela, Galicia (Spain); Alfonsín, Carolina [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela, Galicia (Spain); Amores, María José; Aldea, Xavier; Marin, Desirée [Cetaqua, Water Technology Centre, 08940 Cornellà de Llobregat, Barcelona (Spain); Moreira, María Teresa; Feijoo, Gumersindo [Department of Chemical Engineering, Institute of Technology, University of Santiago de Compostela, 15782 Santiago de Compostela, Galicia (Spain)

2016-05-15

The conventional approach for the environmental assessment of wastewater treatment plants (WWTPs) is typically based on the removal efficiency of organic load and nutrients as well as the quantification of energy and chemicals consumption. Current wastewater treatment research entails the monitoring of direct emissions of greenhouse gases (GHG) and emerging pollutants such as pharmaceutical and personal care products (PPCPs), which have been rarely considered in the environmental assessment of a wastewater treatment facility by life cycle assessment (LCA) methodology. As a result of that, the real environmental impacts of a WWTP may be underestimated. In this study, two WWTPs located in different climatic regions (Atlantic and Mediterranean) of Spain were evaluated in extensive sampling campaigns that included not only conventional water quality parameters but also direct GHG emissions and PPCPs in water and sludge lines. Regarding the GHG monitoring campaign, on-site measurements of methane (CH{sub 4}) and nitrous oxide (N{sub 2}O) were performed and emission factors were calculated for both WWTPs. GHG direct emissions accounted for 62% of the total global warming potential (GWP), much more relevant than indirect CO{sub 2} emissions associated with electricity use. Regarding PPCPs, 19 compounds were measured in the main streams: influent, effluent and sludge, to perform the evaluation of the toxicity impact categories. Although the presence of heavy metals in the effluent and the sludge as well as the toxicity linked to the electricity production may shade the toxicity impacts linked to PPCPs in some impact categories, the latter showed a notable influence on freshwater ecotoxicity potential (FETP). For this impact category, the removal of PPCPs within the wastewater treatment was remarkably important and arose as an environmental benefit in comparison with the non-treatment scenario. - Highlights: • The influence of LCI quality on the environmental assessment

Patent gastrointestinal nematode infections in organically and conventionally pastured dairy cows and their impact on individual milk and fertility parameters.

Science.gov (United States)

May, Katharina; Brügemann, Kerstin; König, Sven; Strube, Christina

2017-10-15

Infections with gastrointestinal nematodes (GIN) can lead to production losses and impacts on product quality in affected cows, which has mainly been demonstrated during deworming experiments or via herd-level measurements. Here, a field study was carried out to explore the association between GIN infection status and milk production as well as fertility parameters in individual dairy cows. Different selection lines of Black and White cows were included in the study, which were distributed among 17 small and medium-sized organic and conventional German grassland farms. Faecal samples of 1166 dairy cows were examined twice, in July and September 2015. Nematode eggs were found in the faeces of 473 (40.6%) cows. As expected, strongylid eggs (Trichostrongylidae or Oesophagostomum and Bunostomum spp., respectively) were the predominant morphotype, followed by Strongyloides papillosus and Capillaria spp. eggs. In July, cows kept under organic conditions had a significantly lower GIN prevalence in comparison to cows kept on conventional farms. Faecal egg counts were generally low, with the highest value in September and an arithmetic mean of 11.3 eggs per gram faeces (EPG) for all observations. The relationships between GIN infection status and milk yield (kg milk/cow/day), milk protein content (%) and milk fat content (%) for each first test-day record after parasitological assessment were estimated by using linear mixed models. Milk protein content was estimated 0.05% lower in GIN positive compared to GIN negative cows, whereas no significant effect on milk yield or milk fat content was observed. The impact of GIN infection status on success in first insemination (SFI) was estimated by using a threshold model. No significant association was demonstrated between GIN infection status and SFI. Unexpectedly, the fertility parameter days from calving-to-first-service (CTFS) showed a significantly shorter average interval in GIN positive cows. However, these data on

Sensory, yield and quality differences between organically and conventionally grown winter wheat.

Science.gov (United States)

Arncken, Christine M; Mäder, Paul; Mayer, Jochen; Weibel, Franco P

2012-11-01

Consumers expect organic produce to have higher environmental, health and sensory related qualities than conventional produce. In order to test sensory differences between bio-dynamically, bio-organically and conventionally grown winter wheat (Triticum aestivum L., cv. Runal), we performed double-blinded triangle tests with two panels on dry wholemeal flour from the harvest years 2006, 2007 and 2009 and from two field replicates of the 'DOK' long-term farming system comparison field trial near Basel, Switzerland. Yield and quality parameters were also assessed. Significant farming system effects were found for yield (up to 42% reduction in the organic system), thousand kernel weight, hectolitre weight and crude protein content across the three years. In the triangle tests one out of 12 pair-wise farming system comparisons (PFSCs) on wholemeal flour made from the different wheat samples showed significant sensory differentiation (between bio-dynamically and conventionally grown wheat). When all data from the three harvest years and two panels were aggregated, a statistically significant effect (P = 0.045) of PFSCs on the number of correct answers became evident. Although testing of dry wholemeal flour was very challenging for panellists, we were able to show that sensory differences between farming systems can occur. Copyright © 2012 Society of Chemical Industry.

Sensitivity of tidal sand wave characteristics to environmental parameters: A combined data analysis and modelling approach

NARCIS (Netherlands)

van Santen, R.B.; de Swart, H.E.; van Dijk, T.A.G.P.

2011-01-01

An integrated field data-modelling approach is employed to investigate relationships between the wavelength of tidal sand waves and four environmental parameters: tidal current amplitude, water depth, tidal ellipticity and median grain size. From echo sounder data at 23 locations on the Dutch

A socio-economic comparison of green and conventional products

DEFF Research Database (Denmark)

Leinikka Dall, Ole; Wenzel, Henrik; Grüttner, Henrik

2011-01-01

by the Danish Environmental Protection Agency 2009-2011 [1]. The definition of product pairs took offset in criteria for environmental labeling schemes as The EU Ecolabel and The Nordic Swan – label. The “green product” meets as a minimum requirement the standards for ecolabeling. The similar “conventional...

Indoor air quality in the Karns research houses: baseline measurements and impact of indoor environmental parameters on formaldehyde concentrations

International Nuclear Information System (INIS)

Matthews, T.G.; Fung, K.W.; Tromberg, B.J.; Hawthorne, A.R.

1985-12-01

Baseline indoor air quality measurements, a nine-month radon study, and an environmental parameters study examining the impact of indoor temperature (T) and relative humidity (RH) levels on formaldehyde (CH 2 O) concentrations have been performed in three unoccupied research homes located in Karns, Tennessee. Inter-house comparison measurements of (1) CH 2 O concentration, (2) CH 2 O emission rates from primary CH 2 O emission sources, (3) radon and radon daughter concentrations, and (4) air exchange rates indicate that the three homes are similar. The results of the nine-month radon study indicate indoor concentrations consistently below the EPA recommended level of 4 pCi/L. Evidence was found that crawl-space concentrations may be reduced using heat pump systems whose outdoor units circulate fresh air through the crawl-space. The modeled results of the environmental parameters study indicate approximate fourfold increases in CH 2 O concentrations from 0.07 to 0.27 ppM for seasonal T and RH conditions of 20 0 C, 30% RH and 29 0 C, 80% RH, respectively. Evaluation of these environmental parameters study data with steady-state CH 2 O concentration models developed from laboratory studies of the environmental dependence of CH 2 O emissions from particleboard underlayment indicate good correlations between the laboratory and field studies

Effects of conventional overground gait training and a gait trainer with partial body weight support on spatiotemporal gait parameters of patients after stroke

OpenAIRE

Park, Byoung-Sun; Kim, Mee-Young; Lee, Lim-Kyu; Yang, Seung-Min; Lee, Won-Deok; Noh, Ji-Woong; Shin, Yong-Sub; Kim, Ju-Hyun; Lee, Jeong-Uk; Kwak, Taek-Yong; Lee, Tae-Hyun; Kim, Ju-Young; Kim, Junghwan

2015-01-01

[Purpose] The purpose of this study was to confirm the effects of both conventional overground gait training (CGT) and a gait trainer with partial body weight support (GTBWS) on spatiotemporal gait parameters of patients with hemiparesis following chronic stroke. [Subjects and Methods] Thirty stroke patients were alternately assigned to one of two treatment groups, and both groups underwent CGT and GTBWS. [Results] The functional ambulation classification on the affected side improved signifi...

Cr-Ni ALLOY ELECTRODEPOSITION AND COMPARISON WITH CONVENTIONAL PURE Cr COATING TECHNIQUE

Directory of Open Access Journals (Sweden)

M. Moniruzzaman

2012-12-01

Full Text Available Cr coating is widely used as the outer surface of precision parts due to its attractive appearance and superior corrosion resistance properties. It is obtained by electrodeposition via a conventional bath with hexavalent Cr ions. This manufacturing technique has many drawbacks, such as very low efficiency and high operating temperature and it is hazardous to health. In this work, we studied a Cr-Ni alloy deposition technique and compared the alloy coating properties to those with conventional Cr coating. Sequential two-step alloy electrodeposition was also compared. We took varying concentrations of Cr, Ni and complexing agents for the electrodeposition of Cr-Ni alloy and sequential Cr-Ni alloy coating on mild steel. Operating parameters, i.e. current density and temperature, were varied to examine their effects on the coating properties. The coatings thus obtained were characterized by visual observation, corrosion test, microhardness measurement, morphology and chemical analysis. The Cr-Ni alloy coating was found to be more corrosion resistant in 5% NaCl solution and harder than the pure Cr coating obtained by conventional electrodeposition. Toxic gas was produced in a much lower extent in the alloy coating than the conventional Cr coating technique. Again, the two-step Cr-Ni alloy coating was found better in terms of corrosion resistance as well as hardness compared to the Cr-Ni alloy coating. The process was also found to be much more environmentally friendly.

Environmental and comparative analysis between the conventional and movil recovery of municipal Solid Wastes in Barcelona (Spain); Analisis ambiental global y local comprativo entre la recogida neumatica movil y convencional de resiudos solidos muncipales en Barcelona

Energy Technology Data Exchange (ETDEWEB)

Sales, C.; Domenech, X.; Rieradevall, J.

2001-07-01

This article describes, from an environmental point of view, these factors that are affected by refuse collecting with a mobile vacuum system, a new technology that is imposing in Spanish cities. Vacuum system consists in the suction of refuse through a pipe net to a collection station (Stationary system) or to a truck (Mobil system). The environmental impacts in vacuum system are compared with impacts in conventional system. I mean collecting in containers on the street. In the evaluation of environmental impacts produced by both systems, the Life Cycle Analysis (LCA) has been used. LCA is an objective method for method for evaluating environmental charges associated to a product, process or activity in every stage of his life. The results reveal a global environmental impact lower in conventional system than vacuum system, but benefits in local environmental factors. (Author) 19 refs.

The macromycetes of Boletus genus as environmental indicators of distribution and evolution of conventional and radioactive pollution [Emilia Romagna

International Nuclear Information System (INIS)

Nonnis Marzano, F.; Triulzi, C.; Bracchi, P.G.; Meloni, S.

1997-01-01

A radioactive and conventional pollution assessment was carried out by using macromycetes of the genus Boletus as bioindicators of environmental contamination. The results suggested the definition of concentration ranges for each ecosystem with the aim of certifying the real origin of the mushrooms. Particularly, radiometrical analyses coupled to neutron activation analysis for the determination of trace elements can be used for controlling the correct trading of the Valtaro Boletus. Such control will be more requested in the future in relation to the IGP (protected geographycal indication) brand assigned by the European Community to the Taro Valley [it

The long term operation of nuclear power plants measured by the yardstick of environmental impact assessment and public participation. Perspective on the European directives, on the Aarhus convention and the Espoo convention. Application to the specific case of Belgium/A perspective on the national implementation of the conventions to nuclear activities. Long-term operation of NPP's measured by the yardstick of environmental impact assessment and public participation

International Nuclear Information System (INIS)

Beyens, Marc

2017-01-01

Mr Beyens illustrated the challenges regarding the applicability of the concepts of environmental impact assessment and public participation, as defined in the Aarhus and Espoo Conventions and the relevant directives of the European Union, to the federal laws extending the operation of two nuclear power plants in Belgium. The Belgian authorities considered that those laws only opened the possibility to extend the operational period of those nuclear plants, subject to conditions set by the Belgian regulatory authority. Therefore, these laws should be considered as 'policies', exempt from the requirements of environmental impact assessment and public participation. In addition, Mr Beyens explained that, after an environmental screening had been carried out, the regulator ruled that its decision to authorise the long-term operation project did not require an environmental impact assessment, since it considered that the modifications to the installations would not significantly impact existing radiological environmental effects. However, in both instances legal challenges have been filed before the constitutional and administrative courts and are still pending. It is possible that a request for a preliminary ruling be submitted to the Court of Justice of the European Union in this regard

Treaty implementation applied to conventions on nuclear safety

International Nuclear Information System (INIS)

Montjoie, Michel

2015-01-01

Given that safety is the number one priority for the nuclear industry, it would seem normal that procedures exist to ensure the effective implementation of the provisions of the conventions on nuclear safety, as already exist for numerous international treaties. Unfortunately, these procedures are either weak or even nonexistent. Therefore, consideration must be given to whether this weakness represents a genuine deficiency in ensuring the main objective of these conventions, which is to achieve a high level of nuclear safety worldwide. But, before one can even address that issue, a prior question must be answered: does the specific nature of the international legal framework on nuclear safety automatically result in a lack of non-compliance procedures in international conventions on the subject? If so, the lack of procedures is justified, despite the drawbacks. The specific nature of the international law on nuclear safety, which in 1994 shaped the content of the CNS by notably not 'allowing' (even today) the incorporation of precise international rules have been taken into account. The next step is to examine whether the absence of non-compliance procedures (which could have been integrated into the text) is a hindrance in ensuring the objectives of the conventions on nuclear safety, and to examine the procedures that could have been used, based on existing provisions in other areas of international law (environmental law, financial law, disarmament law, human rights, etc.). International environmental law will be the main source of this study, as it has certain similarities with the international law on nuclear safety due to the sometimes vague nature of its obligations and irrespective of the fact that one of the purposes of nuclear safety is in particular to protect the environment from radiological hazards. Indeed, the provisions of the law on nuclear safety are mainly technical and designed to guarantee the normal operation of nuclear facilities

Study on the technical parameters of two different systems of RIA performed with solid-phase antibody test tubes prepared with magnetic microparticle covalence conjagation or conventional physical absorption

International Nuclear Information System (INIS)

Chen Zhiqiang; Wang Chengmin; Tang Baojun

2007-01-01

Objective: To investigate a new method of preparation of solid-phase antibody with flurorescein isothioeynate (FITC)-anti FITC magnetic nanoparticles system (for FT 3 and TSH). Methods: FT 3 and TSH monoclonal antibody IgC was la- belied with FITC. Anti-FITC magnetic mieroparticles was prepared and conjugated with the FITC labelled antibody to form the solid - phase coated test tube for RIA. Solid-phase test tube prepared with the conventional physical absorption method was also used for RIA and the technical parameters of the two systems were compared. Results: For FT 3 , the sensitivity was 0.18pmol/L with the new method and 0.43pmol/L with the conventional method. Other parameters were; intra-CV, 8.96% vs 16.26%; inter-CV, 15.25% vs 18.83%, correlation with PR method r=0.9825 vs r=0.9102. For TSH, sensitivity was 0.061 μIU/ml vs 0.04 μ IU/ml, intra- CV, 7.6% vs 6.92%, inter-CV, 8.55% vs 14.23%, correlation between the new and conventional method, r=0. 9987. TSH RIA was especially rapid with the new technic: 79 min vs 190 min. Conclusion: For FT 3 and TSH RIA, the new method takes much less time with increased homogeniety. (authors)

Estimating Soil Hydraulic Parameters using Gradient Based Approach

Science.gov (United States)

Rai, P. K.; Tripathi, S.

2017-12-01

The conventional way of estimating parameters of a differential equation is to minimize the error between the observations and their estimates. The estimates are produced from forward solution (numerical or analytical) of differential equation assuming a set of parameters. Parameter estimation using the conventional approach requires high computational cost, setting-up of initial and boundary conditions, and formation of difference equations in case the forward solution is obtained numerically. Gaussian process based approaches like Gaussian Process Ordinary Differential Equation (GPODE) and Adaptive Gradient Matching (AGM) have been developed to estimate the parameters of Ordinary Differential Equations without explicitly solving them. Claims have been made that these approaches can straightforwardly be extended to Partial Differential Equations; however, it has been never demonstrated. This study extends AGM approach to PDEs and applies it for estimating parameters of Richards equation. Unlike the conventional approach, the AGM approach does not require setting-up of initial and boundary conditions explicitly, which is often difficult in real world application of Richards equation. The developed methodology was applied to synthetic soil moisture data. It was seen that the proposed methodology can estimate the soil hydraulic parameters correctly and can be a potential alternative to the conventional method.

Aarhus and Espoo Conventions: The role in promoting effective public participation in nuclear decision-making. The role of the Aarhus and Espoo Conventions in promoting effective public participation in nuclear decision-making

International Nuclear Information System (INIS)

Yanush, Maryna; Jendroska, Jerzy

2017-01-01

Ms Yanush and Mr Jendroska highlighted the role and importance of the Convention on Access to Information, Public Participation in Decision-Making and Access to Justice in Environmental Matters (the Aarhus Convention) and that of the Convention on Environmental Impact Assessment in a Transboundary Context (the Espoo Convention). These two conventions are open for global accession and, at present, have been ratified mainly by European and Central Asian countries within the United Nations Economic Commission for Europe (UNECE) region. Those two conventions, which apply to a wide range of activities including nuclear, are the only two binding international instruments setting minimum standards for public access to environmental information and public participation in decision making. The Maastricht Recommendations on Promoting Effective Public Participation in Decision-Making in Environmental Matters under the Aarhus Convention and the Good Practice Recommendations on the Application of the Convention to Nuclear Energy-related Activities under the Espoo Convention are instrumental in advancing the implementation in this area. Public participation under the Aarhus Convention goes beyond information or consultation: the decision maker must take into account the views of the 'public concerned' (i.e. the members of the public affected or likely to be affected by the decision making or having an interest in it). As the 'public concerned' is assessed through the potential impact of the proposed activity, including in the case of an accident, the obligation to notify and provide opportunity for public participation is not limited to the territory of the country hosting the proposed activity. Mr Jendroska indicated a particular finding of the Espoo Convention Implementation Committee that decisions regarding modifications, upgrades or extensions to the lifetime/operation of a nuclear installation would be subject to these obligations even though the activity remains exactly

Evaluation of Parameter Uncertainty Reduction in Groundwater Flow Modeling Using Multiple Environmental Tracers

Science.gov (United States)

Arnold, B. W.; Gardner, P.

2013-12-01

Calibration of groundwater flow models for the purpose of evaluating flow and aquifer heterogeneity typically uses observations of hydraulic head in wells and appropriate boundary conditions. Environmental tracers have a wide variety of decay rates and input signals in recharge, resulting in a potentially broad source of additional information to constrain flow rates and heterogeneity. A numerical study was conducted to evaluate the reduction in uncertainty during model calibration using observations of various environmental tracers and combinations of tracers. A synthetic data set was constructed by simulating steady groundwater flow and transient tracer transport in a high-resolution, 2-D aquifer with heterogeneous permeability and porosity using the PFLOTRAN software code. Data on pressure and tracer concentration were extracted at well locations and then used as observations for automated calibration of a flow and transport model using the pilot point method and the PEST code. Optimization runs were performed to estimate parameter values of permeability at 30 pilot points in the model domain for cases using 42 observations of: 1) pressure, 2) pressure and CFC11 concentrations, 3) pressure and Ar-39 concentrations, and 4) pressure, CFC11, Ar-39, tritium, and He-3 concentrations. Results show significantly lower uncertainty, as indicated by the 95% linear confidence intervals, in permeability values at the pilot points for cases including observations of environmental tracer concentrations. The average linear uncertainty range for permeability at the pilot points using pressure observations alone is 4.6 orders of magnitude, using pressure and CFC11 concentrations is 1.6 orders of magnitude, using pressure and Ar-39 concentrations is 0.9 order of magnitude, and using pressure, CFC11, Ar-39, tritium, and He-3 concentrations is 1.0 order of magnitude. Data on Ar-39 concentrations result in the greatest parameter uncertainty reduction because its half-life of 269

Deviation Value for Conventional X-ray in Hospitals in South Sulawesi Province from 2014 to 2016

Science.gov (United States)

Bachtiar, Ilham; Abdullah, Bualkar; Tahir, Dahlan

2018-03-01

This paper describes the conventional X-ray machine parameters tested in the region of South Sulawesi from 2014 to 2016. The objective of this research is to know deviation of every parameter of conventional X-ray machine. The testing parameters were analyzed by using quantitative methods with participatory observational approach. Data collection was performed by testing the output of conventional X-ray plane using non-invasive x-ray multimeter. The test parameters include tube voltage (kV) accuracy, radiation output linearity, reproducibility and radiation beam value (HVL) quality. The results of the analysis show four conventional X-ray test parameters have varying deviation spans, where the tube voltage (kV) accuracy has an average value of 4.12%, the average radiation output linearity is 4.47% of the average reproducibility of 0.62% and the averaged of the radiation beam (HVL) is 3.00 mm.

Beyond Vienna and Montreal: A global framework convention on greenhouse gases

International Nuclear Information System (INIS)

Wirth, D.A.; Lashof, D.A.

1993-01-01

This chapter discusses the need for a framework treaty analogous to the Vienna Convention and to the Montreal Protocol for greenhouse gases. Discussed are the following topics: (1) the immediate need for multilateral greenhouse gas controls, including policy implications of scientific uncertainties; (2) recent steps toward a greenhouse gas convention; (3) an environmentally meaningful plan for a greenhouse gase conventions, including the ozone precident, CO 2 targets, resource transfers, trading emissions allocations, institutional issues

Seasonal variation of semen parameters correlates with environmental temperature and air pollution: A big data analysis over 6 years.

Science.gov (United States)

Santi, Daniele; Magnani, Elisa; Michelangeli, Marco; Grassi, Roberto; Vecchi, Barbara; Pedroni, Gioia; Roli, Laura; De Santis, Maria Cristina; Baraldi, Enrica; Setti, Monica; Trenti, Tommaso; Simoni, Manuela

2018-04-01

Male fertility is progressively declining in many developed countries, but the relationship between male infertility and environmental factors is still unclear. To assess the influence of environmental temperature and air pollution on semen parameters, using a big-data approach. A big data analysis of parameters related to 5131 men, living in a province of Northern Italy and undergoing semen analyses between January 2010 and March 2016 was performed. Ambient temperature was recorded on the day of analysis and the 90 days prior to the analysis and the average value of particulate matter (PM) and NO2 in the year of the test. All data were acquired by geocoding patients residential address. A data warehouse containing 990,904,591 data was generated and analysed by multiple regressions. 5573 semen analyses were collected. Both maximum and minimum temperatures registered on the day of collection were inversely related to total sperm number (p < .001), non-progressive motility (NPrM) (p < .005) and normal forms (p < .001). Results were confirmed considering temperature in the 30 and 60 days before collection, but not in the 90 days before collection. Total sperm number was lower in summer/autumn (p < .001) and was inversely related with daylight duration (p < .001). PM10 and PM2.5 were inversely related to PrM (p < .001 and p < .005) and abnormal forms (p < .001). This is the first evaluation of the relationship between male fertility-related parameters and environment using a big-data approach. A seasonal change in semen parameters was found, with a fluctuation related to both temperature and daylight duration. A negative correlation between air pollution and semen quality is suggested. Such seasonal and environmental associations should be considered when assessing changes of male fertility-related parameters over time. Copyright © 2018 Elsevier Ltd. All rights reserved.

Gingival crevicular fluid volume and periodontal parameters alterations after use of conventional and self-ligating brackets.

Science.gov (United States)

Bergamo, Ana Zn; Nelson-Filho, Paulo; Romano, Fábio L; da Silva, Raquel Ab; Saraiva, Maria Cp; da Silva, Lea Ab; Matsumoto, Mirian An

2016-12-01

The aim of this study was to evaluate the alterations on plaque index (PI), gingival index (GI), gingival bleeding index (GBI), and gingival crevicular fluid (GCF) volume after use of three different brackets types for 60 days. Setting Participants: The sample comprised 20 patients of both sexes aged 11-15 years (mean age: 13.3 years), with permanent dentition, adequate oral hygiene, and mild tooth crowding, overjet, and overbite. A conventional metallic bracket Gemini™, and two different brands of self-ligating brackets - In-Ovation ® R and SmartClip™ - were bonded to the maxillary incisors and canines. PI, GI, GBI scores, and GCF volume were measured before and 30 and 60 days after bonding of the brackets. Data were analysed statistically using non-parametric tests coefficient at a 5% significance level. There was no statistically significant correlation (P > 0.05) between tooth crowding, overjet, and overbite and the PI, GI, GBI scores, and GCF volume before bonding, indicating no influence of malocclusion on the clinical parameters. Regardless of the bracket design, no statistically significant difference (P > 0.05) was found for GI, GBI scores. PI and GCF volume showed a significant difference among the brackets in different periods. In pairwise comparisons a significant difference was observed when compared before with 60 days after bonding, for the teeth bonded with SmartClip™ self-ligating bracket, (PI P = 0.009; GCF volume P = 0.001). There was an increase in PI score and GCF volume 60 days after bonding of SmartClip™ self-ligating brackets, indicating the influence of bracket design on these clinical parameters.

Designing generalized conic concentrators for conventional optical systems

Science.gov (United States)

Eichhorn, W. L.

1985-01-01

Generalized nonimaging concentrators can be incorporated into conventional optical systems in situations where flux concentration rather than imaging is required. The parameters of the concentrator for maximum flux concentration depend on the design of the particular optical system under consideration. Rationale for determining the concentrator parameters is given for one particular optical system and the procedure used for calculation of these parameters is outlined. The calculations are done for three concentrators applicable to the optical system.

The impact of highway base-saturation flow rate adjustment on Kuwait's transport and environmental parameters estimation.

Science.gov (United States)

AlRukaibi, Fahad; AlKheder, Sharaf; Al-Rukaibi, Duaij; Al-Burait, Abdul-Aziz

2018-03-23

Traditional transportation systems' management and operation mainly focused on improving traffic mobility and safety without imposing any environmental concerns. Transportation and environmental issues are interrelated and affected by the same parameters especially at signalized intersections. Additionally, traffic congestion at signalized intersections has a major contribution in the environmental problem as related to vehicle emission, fuel consumption, and delay. Therefore, signalized intersections' design and operation is an important parameter to minimize the impact on the environment. The design and operation of signalized intersections are highly dependent on the base saturation flow rate (BSFR). Highway Capacity Manual (HCM) uses a base-saturation flow rate of 1900-passenger car/h/lane for areas with a population intensity greater than or equal to 250,000 and a value of 1750-passenger car/h/lane for less populated areas. The base-saturation flow rate value in HCM is derived from a field data collected in developed countries. The adopted value in Kuwait is 1800passengercar/h/lane, which is the value that used in this analysis as a basis for comparison. Due to the difference in behavior between drivers in developed countries and their fellows in Kuwait, an adjustment was made to the base-saturation flow rate to represent Kuwait's traffic and environmental conditions. The reduction in fuel consumption and vehicles' emission after modifying the base-saturation flow rate (BSFR increased by 12.45%) was about 34% on average. Direct field measurements of the saturation flow rate were used while using the air quality mobile lab to calculate emissions' rates. Copyright © 2018 Elsevier B.V. All rights reserved.

Evaluation of the effect of conventionally prepared swarna makshika bhasma on different bio-chemical parameters in experimental animals

Directory of Open Access Journals (Sweden)

Sudhaldev Mohapatra

2011-01-01

Full Text Available Swarna makshika (chalcopyrite bhasma (SMB has been used for different therapeutic purposes since long in Ayurveda. The present study is conducted to evaluate the effect of conventionally prepared SMB on different bio-chemical parameters in experimental animals, for providing scientific data base for its logical use in clinical practice. The genuine SMB was prepared by following classical techniques of shodhana and marana most commonly used by different Ayurvedic drug manufacturers. Shodhana was done by roasting raw swarna makshika with lemon juice for three days and marana was performed by 11 putas . The experimental animals (rats were divided into two groups. SMB mixed with diluted honey was administered orally in therapeutic dose to Group SMB and diluted honey only was administered to vehicle control Group, for 30 days. The blood samples were collected twice, after 15 days and after 30 days of drug administration and different biochemical investigations were done. Biochemical parameters were chosen based on references from Ayurvedic classics and contemporary medicine. It was observed that Hb% was found significantly increased and LDL and VLDL were found significantly decreased in Group SMB when compared with vehicle control group. This experimental data will help the clinician for the logical use of SMB in different disease conditions with findings like low Hb% and high LDL, VLDL levels.

Influence of environmental parameters on the frictional behavior of DLC coatings

Energy Technology Data Exchange (ETDEWEB)

Liu, Y. [Louisiana State Univ., Baton Rouge, LA (United States). Mechanical Engineering Dept.; Erdemir, A.; Meletis, E.I. [Argonne National Lab., IL (United States). Energy Technology Div.

1997-05-01

In a previous studies it was shown that diamond like carbon (DLC) films possess low friction coefficient (f) and excellent wear resistance. The reduction in f was found to be consistent with a ``wear induced graphitization`` mechanism of the DLC structure. A recent study showed that operational parameters (sliding velocity and loading level) influence the tribological behavior of DLC film through control of the kinetics of the graphitization process. The objective of the present study was to investigate the influence of environmental parameters (humidity and temperature) on the tribological behavior of DLC film and provide further support to the wear induced graphitization mechanism. Ion beam deposition was utilized to deposit DLC on a SiC substrate. Pin-on-disc experiments were conducted by varying humidity (0%, 40% and 100%) and temperature ({minus}10 C and 25 C). As-deposited DLC and wear debris was characterized by transmission electron microscopy. It was found that lower humidity increases the graphitization rate more than likely due to the reduction in the effect by the water molecules. A decreased graphitization rate was observed at lower temperature and higher humidity and can be attributed to suppression of temperature rise at hot spots. The present findings are consistent with and further verify the wear induced graphitization mechanism.

Environmental Impacts on the Strength Parameters of Mineral-Acrylic (PMMA/ATH Facade Panels

Directory of Open Access Journals (Sweden)

Aleksander Byrdy

2015-01-01

Full Text Available Composite mineral-acrylic panels consist in 80% of natural minerals produced from bauxite (aluminium hydroxides (ATH and in 20% from acrylic resin (polymethyl methacrylate (PMMA. This material due to high usability is widely used in interior finishes. Recently, the mineral-acrylic panels have been used as external claddings of buildings. So far, there are several dozen elevations realized worldwide. Due to the variability of the strength parameters of PMMA acrylic resins depending on the environmental influence, a number of tests on samples of mineral-acrylic panels to verify their suitability for use in climate conditions in Central Europe were performed. The studies determined the change of the material parameters after being subjected to aging process in conditions of high temperature, high relative humidity, freeze-thaw cycles, and UV radiation. In the studies parameters such as flexural strength and modulus of elasticity were measured at a reference temperature of 23°C. In raised and lowered temperatures only the tensile strength tests were conducted. Due to the lack of information in the available literature, the authors carried out tests of the temperature influence on the PMMA/ATH composite modulus of elasticity and flexural strength which is crucial in designing process.

Biometric parameters of the bream (Abramis brama) as indicators for long-term changes in fish health and environmental quality--data from the German ESB.

Science.gov (United States)

Teubner, Diana; Paulus, Martin; Veith, Michael; Klein, Roland

2015-02-01

Piscifaunal health depends upon the state and quality of the aquatic environment. Variations in physical condition of fish may therefore be attributed to changes in environmental quality. Based on time series of up to 20 years of biometric data of bream from multiple sampling sites of the German environmental specimen bank (ESB), this study assessed whether changes in biometric parameters are able to indicate long-term alterations in fish health and environmental quality. Evaluated biometric parameters of fish health comprised length and weight of individuals of a defined age class, the condition factor, lipid content and hepatosomatic index (HSI). Although there are negative trends of the HSI, the overall development of health parameters can be interpreted as positive. This seems to suggest that health parameters conclusively mirror the long-term improvement of water quality in the selected rivers. However, the applicability of the condition factor as well as lipid content as indicators for fish health remained subject to restrictions. Altogether, the results from the ESB confirmed the high value of biometric parameters for monitoring of long-term changes in state and quality of aquatic ecosystems.

Application of ann for predicting water quality parameters in the mediterranean sea along gaza-palestine

International Nuclear Information System (INIS)

Zaqoot, H.A.; Unar, M.A.

2008-01-01

Seawater pollution problems are gaining interest world wide because of their health impacts and other environmental issues. Intense human activities in areas surrounding enclosed and semi-enclosed seas such as the Mediterranean Sea always produce in the long term a strong environmental impact in the form of coastal and marine degradation. This paper is concerned with the use of ANNs (Artificial Neural Networks) MLP ( Multilayer Perceptron) model for the prediction of pH and EC (Electrical Conductivity) in water quality parameters along Gaza city coast. MLP neural networks are trained and developed with reference to three major oceanographic parameters (water temperature, wind speed and turbidity) to predict the values of pH and EC; these parameters are considered as inputs of the neural network. The data collected comprised of four years and collected from nine locations along Gaza coastline. Results show that the model has high capability and accuracy in predicting both parameters. The network performance has been validated with different data sets and the results show satisfactory performance. Results of the developed model have been compared with multiple regression statistical models and found that MLP predictions are slightly better than the conventional methods. Prediction results prove that the proposed approach is suitable for modeling the water quality in the Mediterranean Sea along Gaza. (author)

The use of autecological and environmental parameters for establishing the status of lichen vegetation in a baseline study for a long-term monitoring survey

International Nuclear Information System (INIS)

Gombert, S.; Asta, J.; Seaward, M.R.D.

2005-01-01

In 1997 the ecological characteristics of the epiphytic species (83 lichens and two algae) of an urban area (Grenoble, France) were determined. Seven autecological indices were used to characterize the lichen ecology: illumination index, humidity index, pH of bark, nutrient status of substratum, ecological index of IAP and frequency. Six clusters (A1-A6) were defined using cluster analysis and principal component analysis. Seven environmental parameters characterizing the stations and the lichen releves were also used: elevation, parameters of artificiality (urbanization, traffic and local land use), IAP, and the percentage of nitrophytic and acidophytic species. Six clusters (B1-B6) were defined using cluster analysis and canonical correspondence analysis. Four clusters (C1-C4) were finally defined using an empirical integrated method combining the autecological and environmental parameters. This final clustering which established the status of the lichen vegetation in 1997 can be reliably used as a baseline study to effectively monitor environmental changes in this urban area. - Ecological clustering which establishes the status of lichen vegetation can be reliably used as a baseline study to monitor environmental changes

Multivariate benthic ecosystem functioning in the Arctic – benthic fluxes explained by environmental parameters in the southeastern Beaufort Sea

Directory of Open Access Journals (Sweden)

H. Link

2013-09-01

Full Text Available The effects of climate change on Arctic marine ecosystems and their biogeochemical cycles are difficult to predict given the complex physical, biological and chemical interactions among the ecosystem components. We studied benthic biogeochemical fluxes in the Arctic and the influence of short-term (seasonal to annual, long-term (annual to decadal and other environmental variability on their spatial distribution to provide a baseline for estimates of the impact of future changes. In summer 2009, we measured fluxes of dissolved oxygen, nitrate, nitrite, ammonia, soluble reactive phosphate and silicic acid at the sediment–water interface at eight sites in the southeastern Beaufort Sea at water depths from 45 to 580 m. The spatial pattern of the measured benthic boundary fluxes was heterogeneous. Multivariate analysis of flux data showed that no single or reduced combination of fluxes could explain the majority of spatial variation, indicating that oxygen flux is not representative of other nutrient sink–source dynamics. We tested the influence of eight environmental parameters on single benthic fluxes. Short-term environmental parameters (sinking flux of particulate organic carbon above the bottom, sediment surface Chl a were most important for explaining oxygen, ammonium and nitrate fluxes. Long-term parameters (porosity, surface manganese and iron concentration, bottom water oxygen concentrations together with δ13Corg signature explained most of the spatial variation in phosphate, nitrate and nitrite fluxes. Variation in pigments at the sediment surface was most important to explain variation in fluxes of silicic acid. In a model including all fluxes synchronously, the overall spatial distribution could be best explained (57% by the combination of sediment Chl a, phaeopigments, δ13Corg, surficial manganese and bottom water oxygen concentration. We conclude that it is necessary to consider long-term environmental variability along with

Development and Substantiation of Parameters of Environmentally Friendly Technology for Filling the Vertical Mine Workings with Autoclaved Slag-Concrete

Directory of Open Access Journals (Sweden)

Uglyanitca Andrey

2017-01-01

Full Text Available The environmentally friendly technology for filling the vertical mine workings with autoclaved slag-concrete, prefabricated on the surface of the mine is presented in the article; the optimal parameters of filling technology are proposed. The developed technology for filling the abandoned vertical mine workings allows ensuring the environmental safety of the territories adjacent to the abandoned mine, utilizing slag dumps and providing the possibility of shaft recovery, if necessary, with minimal labor and material costs.

Digital radiography versus conventional radiography during excretory urography: our experience

International Nuclear Information System (INIS)

Cervi, P.M.; Bighi, S.; Merlo, L.; Lupi, L.; Vita, G.

1990-01-01

The authors describe a computed radiographic system employed to generate and archive digital images in intravenous urography. For each exposure the system produces two digital images: the first (left image) simulates a conventional screen-film radiograph, the second (right image); enhances some spatial frequencies and emphasizes the margins of the structures. These images can be modified in their chief parameters and then printed by a laser-printer and archived on optical disks. Four experienced radiologists evaluated digital images with regard to some chief diagnostic parameters and, in 50 patients, they compared digital images with conventional screen-film radiographs and submitted the results to statistical analysis. For some of the chosen parameters, particularly for the evaluation of renal margins before and after contrast medium injection, digital images gave statistically better results than conventional films, while, no statistically significant different was observed for the other parameters. From the results of this preliminary study digital radiography was found to be useful in intravenous urography by reducing the patient's exposition dose, by always obtaining images of good quality, and by enhancing some particular features of the standard image; on the other hand there were many unsolved problems regarding the communicating and archiving system (PACS), because of the slowness of the image transfer procedure, difficulties in data transmission and complexity of referential procedures

A grey-forecasting interval-parameter mixed-integer programming approach for integrated electric-environmental management–A case study of Beijing

International Nuclear Information System (INIS)

Wang, Xingwei; Cai, Yanpeng; Chen, Jiajun; Dai, Chao

2013-01-01

In this study, a GFIPMIP (grey-forecasting interval-parameter mixed-integer programming) approach was developed for supporting IEEM (integrated electric-environmental management) in Beijing. It was an attempt to incorporate an energy-forecasting model within a general modeling framework at the municipal level. The developed GFIPMIP model can not only forecast electric demands, but also reflect dynamic, interactive, and uncertain characteristics of the IEEM system in Beijing. Moreover, it can address issues regarding power supply, and emission reduction of atmospheric pollutants and GHG (greenhouse gas). Optimal solutions were obtained related to power generation patterns and facility capacity expansion schemes under a series of system constraints. Two scenarios were analyzed based on multiple environmental policies. The results were useful for helping decision makers identify desired management strategies to guarantee the city's power supply and mitigate emissions of GHG and atmospheric pollutants. The results also suggested that the developed GFIPMIP model be applicable to similar engineering problems. - Highlights: • A grey-forecasting interval-parameter mixed integer programming (GFIPMIP) approach was developed. • It could reflect dynamic, interactive, and uncertain characteristics of an IEEM system. • The developed GFIPMIP approach was used for supporting IEEM system planning in Beijing. • Two scenarios were established based on different environmental policies and management targets. • Optimal schemes for power generation, energy supply, and environmental protection were identified

The differential effects of core stabilization exercise regime and conventional physiotherapy regime on postural control parameters during perturbation in patients with movement and control impairment chronic low back pain

Directory of Open Access Journals (Sweden)

Fernandes Svetlana

2010-05-01

Full Text Available Abstract Background The purpose of the present study was to examine the differential effect of core stability exercise training and conventional physiotherapy regime on altered postural control parameters in patients with chronic low back pain (CLBP. As heterogeneity in CLBP population moderates the effect of intervention on outcomes, in this study, interventions approaches were used based on sub-groups of CLBP. Methods This was an allocation concealed, blinded, sequential and pragmatic control trial. Three groups of participants were investigated during postural perturbations: 1 CLBP patients with movement impairment (n = 15, MI group randomized to conventional physiotherapy regime 2 fifteen CLBP patients with control impairment randomized to core stability group (CI group and 3 fifteen healthy controls (HC. Results The MI group did not show any significant changes in postural control parameters after the intervention period however they improved significantly in disability scores and fear avoidance belief questionnaire work score (P 0.8 after 8 weeks of core stability exercises for the adjusted p values. Postural control parameters of HC group were analyzed independently with pre and post postural control parameters of CI and MI group. This revealed the significant improvements in postural control parameters in CI group compared to MI group indicating the specific adaptation to the core stability exercises in CI group. Though the disability scores were reduced significantly in CI and MI groups (p Conclusions In this study core stability exercise group demonstrated significant improvements after intervention in ground reaction forces (Fz, Mz; g > 0.8 indicating changes in load transfer patterns during perturbation similar to HC group. Trial registration UTRN095032158-06012009423714

The dependence of Islamic and conventional stocks: A copula approach

Science.gov (United States)

Razak, Ruzanna Ab; Ismail, Noriszura

2015-09-01

Recent studies have found that Islamic stocks are dependent on conventional stocks and they appear to be more risky. In Asia, particularly in Islamic countries, research on dependence involving Islamic and non-Islamic stock markets is limited. The objective of this study is to investigate the dependence between financial times stock exchange Hijrah Shariah index and conventional stocks (EMAS and KLCI indices). Using the copula approach and a time series model for each marginal distribution function, the copula parameters were estimated. The Elliptical copula was selected to present the dependence structure of each pairing of the Islamic stock and conventional stock. Specifically, the Islamic versus conventional stocks (Shariah-EMAS and Shariah-KLCI) had lower dependence compared to conventional versus conventional stocks (EMAS-KLCI). These findings suggest that the occurrence of shocks in a conventional stock will not have strong impact on the Islamic stock.

Interval-parameter chance-constraint programming model for end-of-life vehicles management under rigorous environmental regulations.

Science.gov (United States)

Simic, Vladimir

2016-06-01

As the number of end-of-life vehicles (ELVs) is estimated to increase to 79.3 million units per year by 2020 (e.g., 40 million units were generated in 2010), there is strong motivation to effectively manage this fast-growing waste flow. Intensive work on management of ELVs is necessary in order to more successfully tackle this important environmental challenge. This paper proposes an interval-parameter chance-constraint programming model for end-of-life vehicles management under rigorous environmental regulations. The proposed model can incorporate various uncertainty information in the modeling process. The complex relationships between different ELV management sub-systems are successfully addressed. Particularly, the formulated model can help identify optimal patterns of procurement from multiple sources of ELV supply, production and inventory planning in multiple vehicle recycling factories, and allocation of sorted material flows to multiple final destinations under rigorous environmental regulations. A case study is conducted in order to demonstrate the potentials and applicability of the proposed model. Various constraint-violation probability levels are examined in detail. Influences of parameter uncertainty on model solutions are thoroughly investigated. Useful solutions for the management of ELVs are obtained under different probabilities of violating system constraints. The formulated model is able to tackle a hard, uncertainty existing ELV management problem. The presented model has advantages in providing bases for determining long-term ELV management plans with desired compromises between economic efficiency of vehicle recycling system and system-reliability considerations. The results are helpful for supporting generation and improvement of ELV management plans. Copyright © 2016 Elsevier Ltd. All rights reserved.

Use of a dosimetric system using a SMT phototransistor in the measurement for some dosimetric parameters in conventional radiotherapy

International Nuclear Information System (INIS)

Silva, J.O. da; Magalhaes, C.M.S. de; Santos, L.A.P.

2008-01-01

For monitoring the delivered dose in the patient undergoing a cancer treatment with high-energy ionizing radiation beams is necessary to use appropriate dosimeters for the beam control quality and if it is possible, to obtain the dose information during the treatment. For this, semiconductor-based devices are used because of their high spatial resolution and to be easy to handle in spite of the ionization chambers. Nowadays the bipolar phototransistors are being proposed as ionizing radiation detectors for presenting, beyond these characteristics, the signal amplification factor (gain). So, the aim of this work is to present the use of a dosimetric system using a SMT phototransistor in the measurement for some dosimetric parameters in conventional radiotherapy: the field factor and the off-axis ratio. The phototransistors readings were compared with ones obtained from a PTW 23343 Markus chamber, under the same conditions. (author)

Approaches in highly parameterized inversion - PEST++, a Parameter ESTimation code optimized for large environmental models

Science.gov (United States)

Welter, David E.; Doherty, John E.; Hunt, Randall J.; Muffels, Christopher T.; Tonkin, Matthew J.; Schreuder, Willem A.

2012-01-01

An object-oriented parameter estimation code was developed to incorporate benefits of object-oriented programming techniques for solving large parameter estimation modeling problems. The code is written in C++ and is a formulation and expansion of the algorithms included in PEST, a widely used parameter estimation code written in Fortran. The new code is called PEST++ and is designed to lower the barriers of entry for users and developers while providing efficient algorithms that can accommodate large, highly parameterized problems. This effort has focused on (1) implementing the most popular features of PEST in a fashion that is easy for novice or experienced modelers to use and (2) creating a software design that is easy to extend; that is, this effort provides a documented object-oriented framework designed from the ground up to be modular and extensible. In addition, all PEST++ source code and its associated libraries, as well as the general run manager source code, have been integrated in the Microsoft Visual Studio® 2010 integrated development environment. The PEST++ code is designed to provide a foundation for an open-source development environment capable of producing robust and efficient parameter estimation tools for the environmental modeling community into the future.

Shale gas vs. coal: Policy implications from environmental impact comparisons of shale gas, conventional gas, and coal on air, water, and land in the United States

International Nuclear Information System (INIS)

Jenner, Steffen; Lamadrid, Alberto J.

2013-01-01

The aim of this paper is to examine the major environmental impacts of shale gas, conventional gas and coal on air, water, and land in the United States. These factors decisively affect the quality of life (public health and safety) as well as local and global environmental protection. Comparing various lifecycle assessments, this paper will suggest that a shift from coal to shale gas would benefit public health, the safety of workers, local environmental protection, water consumption, and the land surface. Most likely, shale gas also comes with a smaller GHG footprint than coal. However, shale gas extraction can affect water safety. This paper also discusses related aspects that exemplify how shale gas can be more beneficial in the short and long term. First, there are technical solutions readily available to fix the most crucial problems of shale gas extraction, such as methane leakages and other geo-hazards. Second, shale gas is best equipped to smoothen the transition to an age of renewable energy. Finally, this paper will recommend hybrid policy regulations. - Highlights: ► We examine the impacts of (un)conventional gas and coal on air, water, and land. ► A shift from coal to shale gas would benefit public health. ► Shale gas extraction can affect water safety. ► We discuss technical solutions to fix the most crucial problems of shale gas extraction. ► We recommend hybrid regulations.

Parameter prestasi kerja dalam perspektif Islam

OpenAIRE

Juliandi, Azuar

2017-01-01

Performance appraisal in the view of Islam has not been much studied by Islamic scholars, particularly who focused on the areas of management. During the time, performance parameters of the discourse in the literature of human resource management was the conventional view. The views of conventional, not necessarily in accordance with Islamic values. Most conventional literature suggests about the values of performance only oriented to the life of the world and the material itself, not f...

Environmental impact assessment procedure: A new approach based on fuzzy logic

International Nuclear Information System (INIS)

Peche, Roberto; Rodriguez, Esther

2009-01-01

The information related to the different environmental impacts produced by the execution of activities and projects is often limited, described by semantic variables and, affected by a high degree of inaccuracy and uncertainty, thereby making fuzzy logic a suitable tool with which to express and treat this information. The present study proposes a new approach based on fuzzy logic to carry out the environmental impact assessment (EIA) of these activities and projects. Firstly, a set of impact properties is stated and two nondimensional parameters - ranging from 0 to 100 -are assigned, (p i ) to assess the value of the property and (v i ) to assess its contribution to each environmental impact. Next, the impact properties are described by means of fuzzy numbers p i - using generalised confidence intervals. Then, a procedure based on fuzzy arithmetic is developed to define the assessment functions v-bar = f(p-bar) - conventional mathematical functions, which incorporate the knowledge of these impact properties and give the fuzzy values v i - corresponding to each p i - . Subsequently, the fuzzy value of each environmental impact V-bar is estimated by aggregation of the values v i - , in order to obtain the total positive and negative environmental impacts V +- and V -- and, later - from them - the total environmental impact of the activity or project TV - . Finally, the defuzzyfication of TV - leads to a punctual impact estimator TV (1) - a conventional EI estimation - and its corresponding uncertainty interval estimator {(δ l (TV - ),δ r (TV - )}, which represent the total value of the environmental impact caused by the execution of the considered activity or project.

The sustainability transition. Beyond conventional development

Energy Technology Data Exchange (ETDEWEB)

Raskin, P; Chadwick, M; Jackson, T; Leach, G

1996-10-01

This paper synthesizes findings of the first phase in SEI`s PoleStar Project - a project aimed at developing long-term strategies and policies for sustainable development. Taking a global and long-range perspective, the paper aims to describe a theoretical framework for addressing sustainability, to identify emerging issues and outline directions for future action. The paper begins by setting today`s development and environmental challenges in historical context, and describing the scenario method for envisioning and evaluating alternative futures, and identifying propitious areas for policy and action. It next summarizes a detailed scenario based on conventional development assumptions, and discusses the implications of this scenario for demographic and economic patterns, energy and water resources, land resources and agriculture, and pollution loads and the environment to the year 2050. The conventional scenario relies in part on the sectorally-oriented work discussed in Papers 3 through 6 of the PoleStar Project report series, and makes use of the PoleStar System, software designed for integrated resource, environment and socio-economic accounting and scenario analysis (described in Paper 2). The paper then examines the critical risks to social, resource and environmental systems lying ahead on the conventional development path. Finally, the paper surveys the requirements for sustainability across a number of policy dimensions, and raises key questions for the future. The PoleStar Project is proceeding to examine a range of alternative development scenarios, in the context of the work of the regionally-diverse Global Scenario Group, convened by SEI. The hope remains to offer wise counsel for a transition to an equitable, humane and sustainable future for the global community. 144 refs, 30 figs, 9 tabs

The sustainability transition. Beyond conventional development

International Nuclear Information System (INIS)

Raskin, P.; Chadwick, M.; Jackson, T.; Leach, G.

1996-01-01

This paper synthesizes findings of the first phase in SEI's PoleStar Project - a project aimed at developing long-term strategies and policies for sustainable development. Taking a global and long-range perspective, the paper aims to describe a theoretical framework for addressing sustainability, to identify emerging issues and outline directions for future action. The paper begins by setting today's development and environmental challenges in historical context, and describing the scenario method for envisioning and evaluating alternative futures, and identifying propitious areas for policy and action. It next summarizes a detailed scenario based on conventional development assumptions, and discusses the implications of this scenario for demographic and economic patterns, energy and water resources, land resources and agriculture, and pollution loads and the environment to the year 2050. The conventional scenario relies in part on the sectorally-oriented work discussed in Papers 3 through 6 of the PoleStar Project report series, and makes use of the PoleStar System, software designed for integrated resource, environment and socio-economic accounting and scenario analysis (described in Paper 2). The paper then examines the critical risks to social, resource and environmental systems lying ahead on the conventional development path. Finally, the paper surveys the requirements for sustainability across a number of policy dimensions, and raises key questions for the future. The PoleStar Project is proceeding to examine a range of alternative development scenarios, in the context of the work of the regionally-diverse Global Scenario Group, convened by SEI. The hope remains to offer wise counsel for a transition to an equitable, humane and sustainable future for the global community. 144 refs, 30 figs, 9 tabs

Do It Yourself solution of Internet of Things Healthcare System: Measuring body parameters and environmental parameters affecting health.

Directory of Open Access Journals (Sweden)

Mirjana Maksimović

2016-03-01

Full Text Available The rapid advancements in information and communications technologies (ICT and the increasing number of smart things shift an old-fashioned healthcare system to a model better suited for a population of the 21st century. New healthcare approaches based on Internet of Things (IoT/Internet of Medical Things (IoMT powered systems make health monitoring, diagnostics and treatment more personalized, timely and convenient, enabling a global approach to the healthcare system infrastructure development. Commercial systems in this area exist in various forms but usually do not fit the general patient needs, and those that do are usually economically unacceptable due to the high operational and development costs. Do It Yourself (DIY healthcare, including mobile applications and consumer medical devices, nowadays is the top healthcare trend. Therefore, this paper, based on well-known low-cost technologies, presents a DIY IoMT solution for observing human vital parameter as well as environmental factors affecting health.

Application of environmental Decision Support Systems (Ed's) for the assessment of health effects due to environmental pollution

International Nuclear Information System (INIS)

Voigt, G.

2004-01-01

Environmental Decision Support System containing a Geographical Information System (GIS) combined with (radio)ecological data and models were developed within different research activities in radioecology and geography for environmental management, especially after accidental release of pollutants into the environment. It may be possible to achieve the full potentials of EDSS, through its application in a variety of ways. These include: 1. Identification of radio-ecological sensitive areas, 2. extending its use in the identification of non-radioactive pollution (e.g., heavy metals) by using the necessary transfer models and parameters and 3. its effective use in defining the role of environmental pollution on health effects. In order to achieve the latter (e.g., defining the role of environmental pollution on health effects), a database containing spatial and temporal information on radioactive and conventional pollution can be combined with ethnic composition, living habits, education, income, age/sex structure, general sanitary situation, production, import and export overlaid with health data (e.g., congenital malformations, cancer, mental retardation, immunological situation, birth and death certificates etc.). Since a spatial as well as temporal resolution of data can be achieved, time trends and spatial trends of a potential impact to human health can be demonstrated. (author)

Geneva convention and Critical Loads: an example of Science-based Environmental Policy; Conveio de Ginebra y cargas criticas:un ejemplo de politica ambiental basada en ciencia

Energy Technology Data Exchange (ETDEWEB)

Rabago Juan-Aracil, I.; Alonso del Amo, R.

2011-07-01

Air pollution is one of the leading environmental problems of out times that could eventually change the living conditions of human beings and the ecosystems on the whole planet. Therefore, international forums have been created to discuss environmental policies aimed at the control of pollutant emissions and the protection of ecosystems and human health. the fundamental purpose is to take common actions that go beyond political borders, since in many cases the emissions of pollutants affect ecosystems far from the emission source. These were the objectives leading to the creation of the Geneva Convention on Long-Range Transboundary Air Pollution, of the Economic commission for Europe-United Nations (UNECE). (Author) 12 refs.

Profit-based conventional resource scheduling with renewable energy penetration

Science.gov (United States)

Reddy, K. Srikanth; Panwar, Lokesh Kumar; Kumar, Rajesh; Panigrahi, B. K.

2017-08-01

Technological breakthroughs in renewable energy technologies (RETs) enabled them to attain grid parity thereby making them potential contenders for existing conventional resources. To examine the market participation of RETs, this paper formulates a scheduling problem accommodating energy market participation of wind- and solar-independent power producers (IPPs) treating both conventional and RETs as identical entities. Furthermore, constraints pertaining to penetration and curtailments of RETs are restructured. Additionally, an appropriate objective function for profit incurred by conventional resource IPPs through reserve market participation as a function of renewable energy curtailment is also proposed. The proposed concept is simulated with a test system comprising 10 conventional generation units in conjunction with solar photovoltaic (SPV) and wind energy generators (WEG). The simulation results indicate that renewable energy integration and its curtailment limits influence the market participation or scheduling strategies of conventional resources in both energy and reserve markets. Furthermore, load and reliability parameters are also affected.

Design parameters and source terms: Volume 1, Design parameters: Revision 0

International Nuclear Information System (INIS)

1987-10-01

The Design Parameters and Source Terms Document was prepared in accordance with DOE request and to provide data for the environmental impact study to be performed in the future for the Deaf Smith County, Texas site for a nuclear waste repository in salt. This document updates a previous unpublished report by Stearns Catalytic Corporation (SCC), entitled ''Design Parameters and Source Terms for a Two-Phase Repository in Salt,'' 1985, to the level of the Site Characterization Plan - Conceptual Design Report. The previous unpublished SCC Study identifies the data needs for the Environmental Assessment effort for seven possible Salt Repository sites

Exergy and Environmental Impact Assessment between Solar Powered Gas Turbine and Conventional Gas Turbine Power Plant

Directory of Open Access Journals (Sweden)

Ali Rajaei

2016-01-01

Full Text Available Recuperator is a heat exchanger that is used in gas turbine power plants to recover energy from outlet hot gases to heat up the air entering the combustion chamber. Similarly, the combustion chamber inlet air can be heated up to temperatures up to 1000 (°C by solar power tower (SPT as a renewable and environmentally benign energy source. In this study, comprehensive comparison between these two systems in terms of energy, exergy, and environmental impacts is carried out. Thermodynamic simulation of both cycles is conducted using a developed program in MATLAB environment. Exergetic performances of both cycles and their emissions are compared and parametric study is carried out. A new parameter (renewable factor is proposed to evaluate resources quality and measure how green an exergy loss or destruction or a system as a whole is. Nonrenewable exergy destruction and loss are reduced compared to GT with recuperator cycle by 34.89% and 47.41%, respectively. Reductions in CO2, NOx, and CO compared to GT with recuperator cycle by 49.92%, 66.14%, and 39.77%, respectively, are in line with renewable factor value of around 55.7 which proves the ability of the proposed green measure to evaluate and compare the cycles performances.

Specific features of human rights guaranteed by the Aarhus Convention

Directory of Open Access Journals (Sweden)

Etinski Rodoljub

2013-01-01

Full Text Available The Aarhus Convention legally articulates basic human needs to live in the environment adequate for human health and well-being and to engage in protection and improvement of the environment. It recognized and protected a general human right to adequate environment and three particular rights in environmental matters - to information, to public participation in decision-making and to justice. The Aarhus Convention introduced innovative approach to human rights protection in relation to transboundary issues and legal standing.

Environmental performance review and cost analysis of MSW landfilling by baling-wrapping technology versus conventional system

International Nuclear Information System (INIS)

Baldasano, J.M.; Gasso, S.; Perez, C.

2003-01-01

This paper first reviews the chemical, physical and biological processes, and the environmental performance of MSW compacted and plastic-wrapped into air-tight bales with low-density polyethylene (LDPE). The baling-wrapping process halts the short and half-term biological activity and consequently the emission of gases and leachates. It also facilitates the handling of the refuse, and considerably reduces the main environmental impacts of a landfill. The main technologies available for baling-wrapping MSW are also presented. Furthermore, a cost analysis comparing a conventional landfill (CL) without baling system versus two landfills using different baling-wrapping technologies (rectangular and cylindrical bales) is carried out. The results are presented comparatively under the conditions of construction, operation and maintenance and postclosure, as required by European Directive 1999/31. A landfill using rectangular plastic-wrapped bales (LRPB) represents an economically competitive option compared to a CL. The increased capacity of the waste disposal zone when using rectangular bales due to the high density of the bales compensates for the increased operating and maintenance (O and M) costs of the method. Landfills using cylindrical plastic-wrapped bales (LCPB's) do not fare so well, mainly because the density within the bales is lower, the cylindrical geometry of the bales does not allow such an efficient use of the space within the landfill, and the processing capacity of the machinery is lower. From the cost model, the resulting unit costs per tonne in a LRPB, a LCPB and a CL for 100,000 t/year of waste, an operation time of 15 years and a landfill depth (H) of 20 m, are 31.52, 43.36 and 31.83 Euro/t, respectively

Prediction of radiation levels in residences: A methodological comparison of CART [Classification and Regression Tree Analysis] and conventional regression

International Nuclear Information System (INIS)

Janssen, I.; Stebbings, J.H.

1990-01-01

In environmental epidemiology, trace and toxic substance concentrations frequently have very highly skewed distributions ranging over one or more orders of magnitude, and prediction by conventional regression is often poor. Classification and Regression Tree Analysis (CART) is an alternative in such contexts. To compare the techniques, two Pennsylvania data sets and three independent variables are used: house radon progeny (RnD) and gamma levels as predicted by construction characteristics in 1330 houses; and ∼200 house radon (Rn) measurements as predicted by topographic parameters. CART may identify structural variables of interest not identified by conventional regression, and vice versa, but in general the regression models are similar. CART has major advantages in dealing with other common characteristics of environmental data sets, such as missing values, continuous variables requiring transformations, and large sets of potential independent variables. CART is most useful in the identification and screening of independent variables, greatly reducing the need for cross-tabulations and nested breakdown analyses. There is no need to discard cases with missing values for the independent variables because surrogate variables are intrinsic to CART. The tree-structured approach is also independent of the scale on which the independent variables are measured, so that transformations are unnecessary. CART identifies important interactions as well as main effects. The major advantages of CART appear to be in exploring data. Once the important variables are identified, conventional regressions seem to lead to results similar but more interpretable by most audiences. 12 refs., 8 figs., 10 tabs

Assessment of the Eutrophication-Related Environmental Parameters in Two Mediterranean Lakes by Integrating Statistical Techniques and Self-Organizing Maps.

Science.gov (United States)

Hadjisolomou, Ekaterini; Stefanidis, Konstantinos; Papatheodorou, George; Papastergiadou, Evanthia

2018-03-19

During the last decades, Mediterranean freshwater ecosystems, especially lakes, have been under severe pressure due to increasing eutrophication and water quality deterioration. In this article, we compared the effectiveness of different data analysis methods by assessing the contribution of environmental parameters to eutrophication processes. For this purpose, principal components analysis (PCA), cluster analysis, and a self-organizing map (SOM) were applied, using water quality data from two transboundary lakes of North Greece. SOM is considered as an advanced and powerful data analysis tool because of its ability to represent complex and nonlinear relationships among multivariate data sets. The results of PCA and cluster analysis agreed with the SOM results, although the latter provided more information because of the visualization abilities regarding the parameters' relationships. Besides nutrients that were found to be a key factor for controlling chlorophyll-a (Chl - a), water temperature was related positively with algal production, while the Secchi disk depth parameter was found to be highly important and negatively related toeutrophic conditions. In general, the SOM results were more specific and allowed direct associations between the water quality variables. Our work showed that SOMs can be used effectively in limnological studies to produce robust and interpretable results, aiding scientists and managers to cope with environmental problems such as eutrophication.

Digital subtraction ventriculography for assessment of global and regional leftventricular parameters in comparison to conventional contrast ventriculography

International Nuclear Information System (INIS)

Eichstaedt, H.; Langer, M.; Felix, R.

1984-01-01

Since May 1982 we studied more than 100 patients with heart diseases by means of digital angiography, out of them 46 patients with a history of transmural myocardial infarction were selected. Urografin 76, 30 ml, was administered at a flow rate of 18 ml/s by means of a catheter in the superior vena cava during digital subtraction ventriculography. Results were compared with conventional contrast ventriculograms. The correlation coefficient was r=0.93 (p 0.001) for determination of ejection fraction with both methods. The data in individual cases suggest that DSV is more sensitive than conventional contrast ventriculography in determination of severely reduced ejection fractions. The methods are practically identical in qualitative evaluation of disorders of regional wall motion in the anterolateral region, while DSV is more sensitive than conventional ventriculography in evaluating the apical region. Sensitivity was 85.7% when the two methods were compared in evaluation of the inferior region of the left ventricle. Both methods are identical in demonstration of severely deformed ventricles. Digital subtraction ventriculography may replace conventional contrast ventriculography in some of situations discussed above. (orig.)

ECONOMIC AND ENVIRONMENTAL ASPECTS ASSOCIATED WITH THE TECHNOLOGIES FOR ELECTRICITY PRODUCTION FROM CONVENTIONAL SOURCES AND MEASURES TO MITIGATE THE PRODUCED IMPACTS

Directory of Open Access Journals (Sweden)

PAUL CALANTER

2015-12-01

Full Text Available The electricity sector represents the sector with the greatest impact in terms of producing climate change, mainly due to the greenhouse gas emissions generated through the burning of fossil fuels. It is not however the only negative aspect associated to the classic technologies of electricity production. This paper aims to assess the economic and environmental aspects associated to the technologies for the electricity production from conventional sources and as a conclusion of the research it will also propose certain specific measures designed to mitigate their impacts. Therefore, the analysis will focus on economic issues, such as limited resources of fuels and the significant fluctuation in fuel prices, low energy efficiency, environmental protection expenditures and health issues as a result of the pollution generated by the electricity production and environmental aspects related primarily to the burning of fossil fuels, but also to extraction, transport and storage, aspects concerning the management of waste generated by the energy sector or to the risks associated with the process of producing electricity. In the final part of the paper a few measures will be proposed to mitigate the impact on the environment and economic development of such technologies, as well as increasing energy efficiency, promoting renewable sources of energy, carbon dioxide capture and storage, limiting deforestation, afforestation or the prevention of accidents in the energy sector.

The effects of environmental parameters on zooplankton assemblages in tropical coastal estuary, South-west, Nigeria

Directory of Open Access Journals (Sweden)

Waidi O. Abdul

2016-09-01

Full Text Available The present study was carried out to examine the distribution and assemblage structure of zooplankton in relation to environmental parameters of tropical coastal estuarine ecosystem impounding Bight of Benin, Nigeria. The estuarine water samples were collected between January and December, 2014 from three sampling zones (Brushpark, Open water and Wetland then were fixed in 4% formalin. A total of twenty-eight (28 species belonging to four (4 groups were recorded in this study. These groups were rotifera, copepoda, cladocerans and ostracodas, and were all widely distributed in the three investigated zones. Higher richness, dominance and abundance indices were recorded in Zone I when compared to both Zones II and III. Cluster analysis showed five distinct species communities. The canonical correspondence analysis (CCA showed a distinct smattering positive and negative correlation on the distribution of zooplankton indicating that the relative abundance of any species was dependent on specific environmental variables.

Requirements for, and benefits of, environmentally sound and economically viable management of battery recycling in the Philippines in the wake of Basel Convention trade restrictions

Science.gov (United States)

Hoffmann, U.; Wilson, B.

The ban on the export of used lead-acid batteries (ULAB) from Annex VII to non-Annex VII countries pursuant to decision III/1 of the Basel Convention reduced the availability of imported scrap feedstock for battery recycling in the Philippines. As ULAB supply from other developing countries becomes scarcer, the ban is likely to encourage and enhance collection and recuperation for domestically generated scrap. From a short-term perspective, this study explores the technological and managerial opportunities for improving the environmental and occupational health performance of the formal battery recycling sector and unregulated reconditioning. From a medium- and long-term point of view, the study investigates restructuring the informal ULAB's collection and recycling sector. The objective has been to make the smaller battery recyclers and reconditioners in the informal sector part of an effective and efficient collection infrastructure that supports an environmentally sound secondary lead sector. This approach gradually phases out uncontrolled, inefficient and environmentally unacceptable methods of secondary lead recovery. Due attention has also been paid to the logistical peculiarities of an archipelago, in particular the regional spread of collection infrastructure, collection and shipment costs as well as the assurance of environmentally safe transport.

The significance of conventional radiographic parameters in the diagnosis of scapholunate ligament lesions

Energy Technology Data Exchange (ETDEWEB)

Megerle, Kai; Poehlmann, S.; Kloeters, O. [Plastic and Hand Surgery, University of Heidelberg, Department of Hand-, Plastic and Reconstructive Surgery - Burn Center -, BG-Trauma Center Ludwigshafen, Ludwigshafen (Germany); Germann, G. [Clinic for Plastic, Reconstructive and Aesthetic Surgery and Preventive Medicine, Heidelberg University Hospital, Ethianum Heidelberg, Ludwigshafen (Germany); Sauerbier, M. [Academic Hospital, University of Frankfurt/Main, Department for Plastic, Hand and Reconstructive Surgery, Main-Taunus Private Clinic, Baden Soden (Germany)

2011-01-15

Although in widespread clinical use, evidence of the diagnostic accuracy of radiographic parameters for the diagnosis of scapholunate ligament injuries is scarce. The objective of this study was to evaluate the scapholunate (SL) angle, radiolunate (RL) angle and SL gap as diagnostic parameters for these lesions. Eight hundred forty nine patients, who underwent wrist arthroscopy at our institution because of wrist pain were included in a retrospective analysis. In all patients the SL angle, RL angle and SL gap were measured on preoperative radiographs. These parameters were correlated with the actual finding of the SL ligament during arthroscopy. Optimal test thresholds were calculated as well as sensitivity, specificity and the likelihood ratios of each parameter. All three parameters proved useful in statistical analysis. The optimal cut-off points for diagnosing lesions of the SL ligament were calculated as 62.5 for the SL angle, 12.5 for the RL angle and 2.5 mm for the SL gap. SL angles had the greatest specificity (0.93). We were able to validate plain radiographs as a reliable tool in the work-up of patients with suspected SL ligament injuries. However, wrist arthroscopy remains the gold standard in diagnosing and treating these lesions. (orig.)

An environmentally-friendly vacuum reduction metallurgical process to recover germanium from coal fly ash

Energy Technology Data Exchange (ETDEWEB)

Zhang, Lingen; Xu, Zhenming, E-mail: zmxu@sjtu.edu.cn

2016-07-15

Highlights: • An environmental friendly vacuum reduction metallurgical process is proposed. • Rare and valuable metal germanium from coal fly ash is recycled. • Residues are not a hazardous material and can be further recycled. • A germanium recovery ratio of 94.64% is obtained in pilot scale experiments. - Abstract: The demand for germanium in the field of semiconductor, electronics, and optical devices is growing rapidly; however, the resources of germanium are scarce worldwide. As a secondary material, coal fly ash could be further recycled to retrieve germanium. Up to now, the conventional processes to recover germanium have two problems as follows: on the one hand, it is difficult to be satisfactory for its economic and environmental effect; on the other hand, the recovery ratio of germanium is not all that could be desired. In this paper, an environmentally-friendly vacuum reduction metallurgical process (VRMP) was proposed to recover germanium from coal fly ash. The results of the laboratory scale experiments indicated that the appropriate parameters were 1173 K and 10 Pa with 10 wt% coke addition for 40 min, and recovery ratio germanium was 93.96%. On the basis of above condition, the pilot scale experiments were utilized to assess the actual effect of VRMP for recovery of germanium with parameter of 1473 K, 1–10 Pa and heating time 40 min, the recovery ratio of germanium reached 94.64%. This process considerably enhances germanium recovery, meanwhile, eliminates much of the water usage and residue secondary pollution compared with other conventional processes.

Effects of conventional overground gait training and a gait trainer with partial body weight support on spatiotemporal gait parameters of patients after stroke.

Science.gov (United States)

Park, Byoung-Sun; Kim, Mee-Young; Lee, Lim-Kyu; Yang, Seung-Min; Lee, Won-Deok; Noh, Ji-Woong; Shin, Yong-Sub; Kim, Ju-Hyun; Lee, Jeong-Uk; Kwak, Taek-Yong; Lee, Tae-Hyun; Kim, Ju-Young; Kim, Junghwan

2015-05-01

[Purpose] The purpose of this study was to confirm the effects of both conventional overground gait training (CGT) and a gait trainer with partial body weight support (GTBWS) on spatiotemporal gait parameters of patients with hemiparesis following chronic stroke. [Subjects and Methods] Thirty stroke patients were alternately assigned to one of two treatment groups, and both groups underwent CGT and GTBWS. [Results] The functional ambulation classification on the affected side improved significantly in the CGT and GTBWS groups. Walking speed also improved significantly in both groups. [Conclusion] These results suggest that the GTBWS in company with CGT may be, in part, an effective method of gait training for restoring gait ability in patients after a stroke.

Semen parameters can be predicted from environmental factors and lifestyle using artificial intelligence methods.

Science.gov (United States)

Girela, Jose L; Gil, David; Johnsson, Magnus; Gomez-Torres, María José; De Juan, Joaquín

2013-04-01

Fertility rates have dramatically decreased in the last two decades, especially in men. It has been described that environmental factors as well as life habits may affect semen quality. In this paper we use artificial intelligence techniques in order to predict semen characteristics resulting from environmental factors, life habits, and health status, with these techniques constituting a possible decision support system that can help in the study of male fertility potential. A total of 123 young, healthy volunteers provided a semen sample that was analyzed according to the World Health Organization 2010 criteria. They also were asked to complete a validated questionnaire about life habits and health status. Sperm concentration and percentage of motile sperm were related to sociodemographic data, environmental factors, health status, and life habits in order to determine the predictive accuracy of a multilayer perceptron network, a type of artificial neural network. In conclusion, we have developed an artificial neural network that can predict the results of the semen analysis based on the data collected by the questionnaire. The semen parameter that is best predicted using this methodology is the sperm concentration. Although the accuracy for motility is slightly lower than that for concentration, it is possible to predict it with a significant degree of accuracy. This methodology can be a useful tool in early diagnosis of patients with seminal disorders or in the selection of candidates to become semen donors.

40 CFR 412.44 - Effluent limitations attainable by the application of the best conventional pollutant control...

Science.gov (United States)

2010-07-01

... application of the best conventional pollutant control technology (BCT). 412.44 Section 412.44 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CONCENTRATED ANIMAL... limitations attainable by the application of the best conventional pollutant control technology (BCT). Except...

40 CFR 412.32 - Effluent limitations attainable by the application of the best conventional pollutant control...

Science.gov (United States)

2010-07-01

... application of the best conventional pollutant control technology (BCT). 412.32 Section 412.32 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CONCENTRATED ANIMAL... Effluent limitations attainable by the application of the best conventional pollutant control technology...

China's Environmental Governance in Transition

NARCIS (Netherlands)

Mol, A.P.J.; Carter, N.T.

2006-01-01

In the face of unprecedented economic and industrial growth levels, China is rapidly developing its system of environmental governance. Coming from a conventional command-and-control approach to environmental policy, which fitted well its centrally planned economy, transitional China is swiftly

Estimates of genetic parameters and environmental effects for measures of hunting performance in Finnish hounds.

Science.gov (United States)

Liinamo, A E; Karjalainen, L; Ojala, M; Vilva, V

1997-03-01

Data from field trials of Finnish Hounds between 1988 and 1992 in Finland were used to estimate genetic parameters and environmental effects for measures of hunting performance using REML procedures and an animal model. The original data set included 28,791 field trial records from 5,666 dogs. Males and females had equal hunting performance, whereas experience acquired by age improved trial results compared with results for young dogs (P Hounds with respect to their hunting ability should be based on animal model BLUP methods instead of mere performance testing. The evaluation system of field trials should also be revised for more reliability.

Evaluation of selected predictive models and parameters for the environmental transport and dosimetry of radionuclides

International Nuclear Information System (INIS)

Miller, C.W.; Dunning, D.E. Jr.; Etnier, E.L.; Hoffman, F.O.; Little, C.A.; Meyer, H.R.; Shaeffer, D.L.; Till, J.E.

1979-07-01

Evaluations of selected predictive models and parameters used in the assessment of the environmental transport and dosimetry of radionuclides are summarized. Mator sections of this report include a validation of the Gaussian plume disperson model, comparison of the output of a model for the transport of 131 I from vegetation to milk with field data, validation of a model for the fraction of aerosols intercepted by vegetation, an evaluation of dose conversion factors for 232 Th, an evaluation of considering the effect of age dependency on population dose estimates, and a summary of validation results for hydrologic transport models

RMB identification based on polarization parameters inversion imaging

Science.gov (United States)

Liu, Guoyan; Gao, Kun; Liu, Xuefeng; Ni, Guoqiang

2016-10-01

Social order is threatened by counterfeit money. Conventional anti-counterfeit technology is much too old to identify its authenticity or not. The intrinsic difference between genuine notes and counterfeit notes is its paper tissue. In this paper a new technology of detecting RMB is introduced, the polarization parameter indirect microscopic imaging technique. A conventional reflection microscopic system is used as the basic optical system, and inserting into it with polarization-modulation mechanics. The near-field structural characteristics can be delivered by optical wave and material coupling. According to coupling and conduction physics, calculate the changes of optical wave parameters, then get the curves of the intensity of the image. By analyzing near-field polarization parameters in nanoscale, finally calculate indirect polarization parameter imaging of the fiber of the paper tissue in order to identify its authenticity.

The influence of remelting parameters of the electric arc and conventional tempering on the tribological resistance of high speed steel HS 6-5-2

Directory of Open Access Journals (Sweden)

A. Dziedzic

2011-07-01

Full Text Available The present thesis depicts the results of the research of tribological high speed steel HS 6-5-2 remelted with the electric arc. Steel was remelted with different parameters. The amperage of electric arc was changed, the scanning speed was changed and the single, overlapping remeltings were used. There was also the influence of conventional tempering defined, which was conducted after remelting on the tribological resistance of hardened steel. For the previously mentioned processing variants, the intensity of tribological wear was defined and the linear wear were presented, and the friction coefficients. The type of tribological wear was also given, present during the friction, technically dry, of the hardened steel. The lower intensity of tribological wear was received for the single remelting by electric arc of 50 and 70A. Using the overlapping remeltings for the strengening of the surface layer of the high speed steel HS 6-5-2 causes the increase of the intensity of tribological wear in comparison to the steel with the single remelting. The conventional tempering leads to the decrease of the intensity of tribological wear.

Physics Potential of Very Intense Conventional Neutrino Beams

CERN Document Server

Gómez-Cadenas, J J; Burguet-Castell, J; Casper, David William; DOnega, M; Gilardoni, S S; Hernández, Pilar; Mezzetto, Mauro

2001-01-01

The physics potential of high intensity conventional beams is explored. We consider a low energy super beam which could be produced by a proposed new accelerator at CERN, the Super Proton Linac. Water Cherenkov and liquid oil scintillator detectors are studied as possible candidates for a neutrino oscillation experiment which could improve our current knowledge of the atmospheric parameters and measure or severely constrain the parameter connecting the atmospheric and solar realms. It is also shown that a very large water detector could eventually observe leptonic CP violation. The reach of such an experiment to the neutrino mixing parameters would lie in-between the next generation of neutrino experiments (MINOS, OPERA, etc) and a future neutrino factory.

40 CFR 451.13 - Effluent limitations attainable by the application of the best conventional technology (BCT).

Science.gov (United States)

2010-07-01

... application of the best conventional technology (BCT). 451.13 Section 451.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CONCENTRATED AQUATIC ANIMAL... limitations attainable by the application of the best conventional technology (BCT). Except as provided in 40...

Does environmental economics produce aeroplanes without engines? On the need for an environmental social science

NARCIS (Netherlands)

Folmer, Henk; Johansson-Stenman, Olof

In this paper we first critically review conventional environmental economics. We conclude that the standard theory offers too narrow a perspective for many real world problems and that many theories are not empirically tested. Consequently, environmental economics is at risk of producing aeroplanes

40 CFR 451.23 - Effluent limitations attainable by the application of the best conventional technology (BCT).

Science.gov (United States)

2010-07-01

... application of the best conventional technology (BCT). 451.23 Section 451.23 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CONCENTRATED AQUATIC ANIMAL... application of the best conventional technology (BCT). Except as provided in 40 CFR 125.30 through 125.32, any...

Comparative analysis of parameters of oxygenation, ventilation and acid-base status during intraoperative application of conventional and protective lung ventilation

Directory of Open Access Journals (Sweden)

Videnović N.

2015-01-01

Full Text Available The aim of this study was to perform a comparative analysis applied conventional (traditional and protective mechanical lung ventilation in clinical conditions with regard to intraoperative parameters changes of oxygenation, ventilation and acid-base status. This was a prospective study that included 240 patients. All patients underwent the same elective surgery (classic cholecystectomy. Patients were divided into two groups of 120 patients, A and B. In group A during the operation had received conventional lung ventilation with tidal volume of 10-15 ml/kg body weight, respiratory rate 12/min. and a PEEP zero. In group B was applied protective lung ventilation with a tidal volume of 6-8 ml/kg body weight, respiratory rate 12/min. and a PEEP of 7 mbar. Monitoring of oxygenation included the monitoring SaO2 and PaO2. Monitoring of ventilation included the determination of the value of tidal volume and minute volume ventilation, peak inspiratory pressure (Ppeak, medium pressure in the airway (Paw.mean, PEEP, PaCO2 and EtCO2. Monitoring of acid-base status was performed via determination of the pH values of arterial blood. Monitoring was carried out in four intervals: T1 - 5-10 minutes after the establishment of the airway, T2 - after opening peritoneum, T3 - after removal of the gallbladder, T4 - after the closure of the abdominal wall. All monitoring results are presented as mean. The statistical significance of differences in mean values was tested by t - test mean values in the case of two independent samples. As a statistical significance test taken as standard values p <0.01 and p <0.001. Comparative analysis of the value of SaO2, PaO2, Ppeak did not reach statistical significance. Statistical significance there is in the analysis of values of tidal volume and Paw.mean (p <0.001. Analysis of PaCO2 and pH of arterial blood showed no statistical significance in the first interval measurements but did interval T2-T4 (p <0.001. Based on the

Effects of simulated space environmental parameters on six commercially available composite materials

International Nuclear Information System (INIS)

Funk, J.G.; Sykes, G.F. Jr.

1989-04-01

The effects of simulated space environmental parameters on microdamage induced by the environment in a series of commercially available graphite-fiber-reinforced composite materials were determined. Composites with both thermoset and thermoplastic resin systems were studied. Low-Earth-Orbit (LEO) exposures were simulated by thermal cycling; geosynchronous-orbit (GEO) exposures were simulated by electron irradiation plus thermal cycling. The thermal cycling temperature range was -250 F to either 200 F or 150 F. The upper limits of the thermal cycles were different to ensure that an individual composite material was not cycled above its glass transition temperature. Material response was characterized through assessment of the induced microcracking and its influence on mechanical property changes at both room temperature and -250 F. Microdamage was induced in both thermoset and thermoplastic advanced composite materials exposed to the simulated LEO environment. However, a 350 F cure single-phase toughened epoxy composite was not damaged during exposure to the LEO environment. The simuated GEO environment produced microdamage in all materials tested

Heavy metals and other elements in serum of cattle from organic and conventional farms.

Science.gov (United States)

Tomza-Marciniak, Agnieszka; Pilarczyk, Bogumiła; Bąkowska, Małgorzata; Pilarczyk, Renata; Wójcik, Jerzy

2011-11-01

Concentrations of cadmium, lead, iron, zinc, copper, chromium, nickel, aluminium and arsenium were analysed in blood serum of cattle from organic (n=20) and conventional (n=21) farms. The elements were determined by inductively coupled plasma atomic emission spectrometry using an Optima 2000 DV instrument (Perkin Elmer Inc.). Animals from the organic farm were characterised by significantly lower (Panimals from the conventional farm. The concentration of Cd was similar in animals from both organic and conventional farms. The concentration of toxic elements in cattle from organic and conventional farms studied was very low. The trace essential elements were generally within the adequate ranges except Zn and Cu, which were deficient. In organically reared animals, also serum Fe content was below the critical level for diagnosing iron deficiency. Pb was significantly correlated with Cd, Zn, Fe, Cu and Ni. A significant positive correlation between the concentration of Cd and Zn, Cu and Ni concentrations was only observed in cows from the organic farm. The present results suggest that organically raised animals are less exposed to harmful environmental influences such as the environmental pollution with heavy metals. On the other hand, these animals are at a greater risk of mineral deficiency compared to animals kept on conventional farms.

Principles of environmental legislation in UN, EU and Republic of Serbia

Directory of Open Access Journals (Sweden)

Popov Danica

2013-01-01

Full Text Available A key turning point regarding to environmental protection was the United Nations Conference on the Human environment held in Stockholm, in1972. On the Conference was adopted the UN Declaration on the Human environment. On that occasion established fundamental principles of environmental protection. At the Conference, UNEP, held in Rio de Janeiro in 1992. has adopted the UN Declaration on the Environmental protection and sustainable development.. The Council of Europe has adopted a number of documents in which the central part is the protection of the environment. The Council of Europe adopted the following conventions: Convention on the Conservation of European Wildlife and Natural habitats in 1979; Convention on Civil Liability for Damage Resulting from Activities Dangerous to the Environment in 1993; Convention on the protection of Environment trough Criminal Law, in 1998; and European Landscape Convention in 2000. The Constitution of Republic of Serbia proclaims the right to a healthy environment, but also establishes the obligation of all, to conserve and improve it. The fundamental principles of environmental protection system in our county are regulated by the following. The Law on Environmental Protection, The Law on Environment Impact, The Law on Environment Strategic Impact and The Law on Integrated Pollution Prevention and Control. These Laws are aimed towards establishing an environmental management system and providing protection from natural balance degradation. With a great number of Laws in particular sectors of environmental protection, Republic of Serbia received modern legislation, which formed, a good basis for economic and social activities involved in environmental protection.

Kinetic parameter estimation from attenuated SPECT projection measurements

International Nuclear Information System (INIS)

Reutter, B.W.; Gullberg, G.T.

1998-01-01

Conventional analysis of dynamically acquired nuclear medicine data involves fitting kinetic models to time-activity curves generated from regions of interest defined on a temporal sequence of reconstructed images. However, images reconstructed from the inconsistent projections of a time-varying distribution of radiopharmaceutical acquired by a rotating SPECT system can contain artifacts that lead to biases in the estimated kinetic parameters. To overcome this problem the authors investigated the estimation of kinetic parameters directly from projection data by modeling the data acquisition process. To accomplish this it was necessary to parametrize the spatial and temporal distribution of the radiopharmaceutical within the SPECT field of view. In a simulated transverse slice, kinetic parameters were estimated for simple one compartment models for three myocardial regions of interest, as well as for the liver. Myocardial uptake and washout parameters estimated by conventional analysis of noiseless simulated data had biases ranging between 1--63%. Parameters estimated directly from the noiseless projection data were unbiased as expected, since the model used for fitting was faithful to the simulation. Predicted uncertainties (standard deviations) of the parameters obtained for 500,000 detected events ranged between 2--31% for the myocardial uptake parameters and 2--23% for the myocardial washout parameters

Physiological Parameters Database for Older Adults

Data.gov (United States)

U.S. Environmental Protection Agency — The Physiological Parameters Database for Older Adults is available for download and contains physiological parameters values for healthy older human adults (age 60...

Surveillance and Control of Malaria Transmission in Thailand using Remotely Sensed Meteorological and Environmental Parameters

Science.gov (United States)

Kiang, Richard K.; Adimi, Farida; Soika, Valerii; Nigro, Joseph

2007-01-01

These slides address the use of remote sensing in a public health application. Specifically, this discussion focuses on the of remote sensing to detect larval habitats to predict current and future endemicity and identify key factors that sustain or promote transmission of malaria in a targeted geographic area (Thailand). In the Malaria Modeling and Surveillance Project, which is part of the NASA Applied Sciences Public Health Applications Program, we have been developing techniques to enhance public health's decision capability for malaria risk assessments and controls. The main objectives are: 1) identification of the potential breeding sites for major vector species; 2) implementation of a risk algorithm to predict the occurrence of malaria and its transmission intensity; 3) implementation of a dynamic transmission model to identify the key factors that sustain or intensify malaria transmission. The potential benefits are: 1) increased warning time for public health organizations to respond to malaria outbreaks; 2) optimized utilization of pesticide and chemoprophylaxis; 3) reduced likelihood of pesticide and drug resistance; and 4) reduced damage to environment. !> Environmental parameters important to malaria transmission include temperature, relative humidity, precipitation, and vegetation conditions. The NASA Earth science data sets that have been used for malaria surveillance and risk assessment include AVHRR Pathfinder, TRMM, MODIS, NSIPP, and SIESIP. Textural-contextual classifications are used to identify small larval habitats. Neural network methods are used to model malaria cases as a function of the remotely sensed parameters. Hindcastings based on these environmental parameters have shown good agreement to epidemiological records. Discrete event simulations are used for modeling the detailed interactions among the vector life cycle, sporogonic cycle and human infection cycle, under the explicit influences of selected extrinsic and intrinsic factors

Influence of environmental parameters on the concentration of subsurface dissolved methane in two hydroelectric power plants in Brazil

Science.gov (United States)

Silva, M. G.; Marani, L.; Alvala, P. C.

2013-12-01

Methane (CH4) is a trace gas in the atmosphere of great importance for atmospheric chemistry as one of the main greenhouse gases. There are different sources with the largest individual production associated with the degradation of organic matter submerged in flooded areas. The amount of dissolved methane that reaches the surface depends on the production in the sediments and consumption in the water column. Both processes are associated with microbial activity and consequently dependent on the physico-chemical environmental conditions. The construction of hydroelectric dams cause flooding of areas near the river that can change the characteristics of the environment and cause changes in subsurface methane concentration. In this work, we studied two hydroelectric plants located in Brazil: Batalha (17°20'39.52"S, 47°29'34.29"W), under construction when the samples were take, and Itaipu (25°24'45.00"S, 54°35'39.00"W) which has been floated over 30 years ago. The water samples to determine dissolved methane were collected approximately 5 cm near the surface. In each collection point was measured depth, water temperature, pH and redox potential. The range of dissolved methane between the two dams was similar: 0.07-10.33 μg/l (Batalha) and 0.15-10.93 μg/l (Itaipu). However, the Batalha's average (4.04 × 3.43 μg/l; median = 3.66 μg/l) was higher than that observed in Itaipu (2.15 × 1.59 μg/l; median = 2.53 μg/l). The influence of environmental parameters on the concentration of dissolved methane was evaluated by multivariate statistical techniques (Principal Component Analysis - PCA). All of the parameters had some correlation with dissolved methane, however, the greatest contribution in Batalha was associated with pH while in Itaipu was the depth. The pH variation of the various points studied in Batalha may be associated with periods of drought and flooding of the river and hence the incorporation of organic matter in the environment. The organisms

Special Issue Environmental Governance in China

NARCIS (Netherlands)

Carter, N.T.; Mol, A.P.J.

2006-01-01

In the face of unprecedented economic and industrial growth levels, China is rapidly developing its system of environmental governance. Coming from a conventional command-and-control approach to environmental policy, which fitted well its centrally planned economy, transitional China is swiftly

Effects of environmental and water quality parameters on the functioning of copepod assemblages in tropical estuaries

Science.gov (United States)

Araujo, Adriana V.; Dias, Cristina O.; Bonecker, Sérgio L. C.

2017-07-01

We examined changes in the functioning of copepod assemblages with increasing pollution in estuaries, using sampling standardization of the salinity range to enable comparisons. Copepod assemblages were analyzed in four southeast Brazilian estuaries with different water quality levels and hydrodynamic characteristics over two years. We obtained mesozooplankton samples together with environmental and water quality parameters in the estuaries, every two months under predetermined salinities ranging from 15 to 25. The values of parameters, except species size, associated with the functioning of the copepod assemblages (biomass, productivity, and turnover rate) did not differ among estuaries. However, in the more polluted estuaries, the biomass and productivity of copepod assemblages of mesozooplankton were negatively correlated with concentration of pollution indicator parameters. Conversely, in the less polluted estuaries some degree of enrichment still seems to increase the system biomass and productivity, as these parameters were inversely related to indicators of improved water quality. The pollution level of estuaries distorted the relationship between temperature and the efficiency of converting energy to organic matter. In the less polluted estuaries, the relationship between turnover rate and temperature was over 70%, while in the most polluted estuaries, this relationship was only approximately 50%. Our results demonstrated that the functioning of assemblages in the estuaries was affected differently by increasing pollution depending on the water quality level of the system. Thus, investigating the functioning of assemblages can be a useful tool for the analysis of estuarine conditions.

ANALYSIS OF EXERGY PARAMETERS OF BIOGAS POWER PLANT

Directory of Open Access Journals (Sweden)

Denysova A.E.

2014-08-01

Full Text Available The techniques of an exergy analysis concerning various circuits of biogas units, which allows replacing traditional energy resources and improving environmental conditions, has been presented. The heat schemes of biogas units were proposed, and analysis of their effectiveness was made. The comparison of different cycle parameters of various biogas units (i.e. a combustion turbine unit, a combined cycle gas turbine unit with gas discharges into the boiler and a combined cycle gas turbine with a high-temperature vapor generator and a reheating stage was made, and the comparison of their exergy characteristics was carried out. The results of exergy analysis had demonstrated that the cycle of biogas CCGT (combined cycle gas turbine with a reheating stage and using a high-pressure steam generator is the most effective, that can be explained by the fact that the thermal energy proportions of combustion products, accounting for the steam cycle and the gas cycle are approximately equal, comparing to conventional combined cycle gas turbine units.

Environmental accounting and statistics

International Nuclear Information System (INIS)

Bartelmus, P.L.P.

1992-01-01

The objective of sustainable development is to integrate environmental concerns with mainstream socio-economic policies. Integrated policies need to be supported by integrated data. Environmental accounting achieves this integration by incorporating environmental costs and benefits into conventional national accounts. Modified accounting aggregates can thus be used in defining and measuring environmentally sound and sustainable economic growth. Further development objectives need to be assessed by more comprehensive, though necessarily less integrative, systems of environmental statistics and indicators. Integrative frameworks for the different statistical systems in the fields of economy, environment and population would facilitate the provision of comparable data for the analysis of integrated development. (author). 19 refs, 2 figs, 2 tabs

Intelligent Environmental Nanomaterials

KAUST Repository

Chang, Jian

2018-01-30

Due to the inherent complexity of environmental problems, especially water and air pollution, the utility of single-function environmental nanomaterials used in conventional and unconventional environmental treatment technologies are gradually reaching their limits. Intelligent nanomaterials with environmentally-responsive functionalities have shown potential to improve the performance of existing and new environmental technologies. By rational design of their structures and functionalities, intelligent nanomaterials can perform different tasks in response to varying application scenarios for the purpose of achieving the best performance. This review offers a critical analysis of the design concepts and latest progresses on the intelligent environmental nanomaterials in filtration membranes with responsive gates, materials with switchable wettability for selective and on-demand oil/water separation, environmental materials with self-healing capability, and emerging nanofibrous air filters for PM2.5 removal. We hope that this review will inspire further research efforts to develop intelligent environmental nanomaterials for the enhancement of the overall quality of environmental or human health.

Intelligent Environmental Nanomaterials

KAUST Repository

Chang, Jian; Zhang, Lianbin; Wang, Peng

2018-01-01

Due to the inherent complexity of environmental problems, especially water and air pollution, the utility of single-function environmental nanomaterials used in conventional and unconventional environmental treatment technologies are gradually reaching their limits. Intelligent nanomaterials with environmentally-responsive functionalities have shown potential to improve the performance of existing and new environmental technologies. By rational design of their structures and functionalities, intelligent nanomaterials can perform different tasks in response to varying application scenarios for the purpose of achieving the best performance. This review offers a critical analysis of the design concepts and latest progresses on the intelligent environmental nanomaterials in filtration membranes with responsive gates, materials with switchable wettability for selective and on-demand oil/water separation, environmental materials with self-healing capability, and emerging nanofibrous air filters for PM2.5 removal. We hope that this review will inspire further research efforts to develop intelligent environmental nanomaterials for the enhancement of the overall quality of environmental or human health.

15 CFR 742.18 - Chemical Weapons Convention (CWC or Convention).

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Chemical Weapons Convention (CWC or... REGULATIONS CONTROL POLICY-CCL BASED CONTROLS § 742.18 Chemical Weapons Convention (CWC or Convention). States... Use of Chemical Weapons and on Their Destruction, also known as the Chemical Weapons Convention (CWC...

The effect of environmental parameters to dust concentration in air-conditioned space

Science.gov (United States)

Ismail, A. M. M.; Manssor, N. A. S.; Nalisa, A.; Yahaya, N.

2017-08-01

Malaysia has a wet and hot climate, therefore most of the spaces are air conditioned. The environment might affect dust concentration inside a space and affect the indoor air quality (IAQ). The main objective of this study is to study the dust concentration collected inside enclosed air-conditioned space. The measurement was done physically at four selected offices and two classrooms using a number of equipment to measure the dust concentration and environmental parameters which are temperature and relative air humidity. It was found that the highest dust concentration produced in office (temperature of 24.7°C, relative humidity of 66.5%) is 0.075 mg/m3, as compared to classroom, the highest dust concentration produced is 0.060 mg/m3 office (temperature of 25.9°C, relative humidity of 64.0%). However, both measurements show that value still within the safety level set by DOSH Malaysia (2005-2010) and ASHRAE 62.2 2016. The office contained higher dust concentration compared to classroom because of frequent movement transpires daily due to the functional of the offices.

Comparison of Conventional and Semi-Conventional Management ...

African Journals Online (AJOL)

Comparison of Conventional and Semi-Conventional Management Systems on the Performance and Carcass Yield of Broiler Chickens. ... TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES ... Journal Home > Vol 20, No 1 (2018) >. Log in or ...

Conventions and nomenclature for double diffusion encoding NMR and MRI

DEFF Research Database (Denmark)

Shemesh, Noam; Jespersen, Sune N; Alexander, Daniel C

2015-01-01

, such as double diffusion encoding (DDE) NMR and MRI, may provide novel quantifiable metrics that are less easily inferred from conventional diffusion acquisitions. Despite the growing interest on the topic, the terminology for the pulse sequences, their parameters, and the metrics that can be derived from them...

Application of spreadsheet to estimate infiltration parameters

Directory of Open Access Journals (Sweden)

Mohammad Zakwan

2016-09-01

Full Text Available Infiltration is the process of flow of water into the ground through the soil surface. Soil water although contributes a negligible fraction of total water present on earth surface, but is of utmost importance for plant life. Estimation of infiltration rates is of paramount importance for estimation of effective rainfall, groundwater recharge, and designing of irrigation systems. Numerous infiltration models are in use for estimation of infiltration rates. The conventional graphical approach for estimation of infiltration parameters often fails to estimate the infiltration parameters precisely. The generalised reduced gradient (GRG solver is reported to be a powerful tool for estimating parameters of nonlinear equations and it has, therefore, been implemented to estimate the infiltration parameters in the present paper. Field data of infiltration rate available in literature for sandy loam soils of Umuahia, Nigeria were used to evaluate the performance of GRG solver. A comparative study of graphical method and GRG solver shows that the performance of GRG solver is better than that of conventional graphical method for estimation of infiltration rates. Further, the performance of Kostiakov model has been found to be better than the Horton and Philip's model in most of the cases based on both the approaches of parameter estimation.

Diagnostic performances of shear wave elastography: which parameter to use in differential diagnosis of solid breast masses?

Science.gov (United States)

Lee, Eun Jung; Jung, Hae Kyoung; Ko, Kyung Hee; Lee, Jong Tae; Yoon, Jung Hyun

2013-07-01

To evaluate which shear wave elastography (SWE) parameter proves most accurate in the differential diagnosis of solid breast masses. One hundred and fifty-six breast lesions in 139 consecutive women (mean age: 43.54 ± 9.94 years, range 21-88 years), who had been scheduled for ultrasound-guided breast biopsy, were included. Conventional ultrasound and SWE were performed in all women before biopsy procedures. Ultrasound BI-RADS final assessment and SWE parameters were recorded. Diagnostic performance of each SWE parameter was calculated and compared with those obtained when applying cut-off values of previously published data. Performance of conventional ultrasound and ultrasound combined with each parameter was also compared. Of the 156 breast masses, 120 (76.9 %) were benign and 36 (23.1 %) malignant. Maximum stiffness (Emax) with a cut-off of 82.3 kPa had the highest area under the receiver operating characteristics curve (Az) value compared with other SWE parameters, 0.860 (sensitivity 88.9 %, specificity 77.5 %, accuracy 80.1 %). Az values of conventional ultrasound combined with each SWE parameter showed lower (but not significantly) values than with conventional ultrasound alone. Maximum stiffness (82.3 kPa) provided the best diagnostic performance. However the overall diagnostic performance of ultrasound plus SWE was not significantly better than that of conventional ultrasound alone. • SWE offers new information over and above conventional breast ultrasound • Various SWE parameters were explored regarding distinction between benign and malignant lesions • An elasticity of 82.3 kPa appears optimal in differentiating solid breast masses • However, ultrasound plus SWE was not significantly better than conventional ultrasound alone.

Technological advancements revitalize conventional oil sector

International Nuclear Information System (INIS)

Thomson, L.

2000-01-01

Maturing reserves in the Western Canada Sedimentary Basin is resulting in a gradual shift of focus from huge new discoveries and wildcat gushers to developing new technologies for exploration and enhanced recovery techniques of production, keeping costs down and reducing environmental impacts, as a means of keeping conventional oil plays a viable force in the oil and gas industry. The value in refocusing efforts towards technology development is given added weight by a recent announcement by the Petroleum Communication Foundation, which stated that in addition to the oil sands and offshore oil and gas developments, one of the country's largest undeveloped oil resource is the 70 per cent of discovered crude oil in western Canadian pools that cannot be recovered by current conventional production techniques. Therefore, development of new technologies to exploit these currently unrecoverable resources is a matter of high priority. To remain competitive, the new techniques must also lower the cost of recovering oil from these sources, given that the cost of oil production in Canada is already higher than that in most other competing countries

Total life-cycle cost analysis of conventional and alternative fueled vehicles

International Nuclear Information System (INIS)

Cardullo, M.W.

1993-01-01

Total Life-Cycle Cost (TLCC) Analysis can indicate whether paying higher capital costs for advanced technology with low operating and/or environmental costs is advantageous over paying lower capital costs for conventional technology with higher operating and/or environmental costs. While minimizing total life-cycle cost is an important consideration, the consumer often identifies non-cost-related benefits or drawbacks that make more expensive options appear more attractive. The consumer is also likely to heavily weigh initial capital costs while giving limited consideration to operating and/or societal costs, whereas policy-makers considering external costs, such as those resulting from environmental impacts, may reach significantly different conclusions about which technologies are most advantageous to society. This paper summarizes a TLCC model which was developed to facilitate consideration of the various factors involved in both individual and societal policy decision making. The model was developed as part of a US Department of Energy Contract and has been revised to reflect changes necessary to make the model more realistic. The model considers capital, operating, salvage, and environmental costs for cars, vans, and buses using conventional and alternative fuels. The model has been developed to operate on an IBM or compatible personal computer platform using the commercial spreadsheet program MicroSoft Excell reg-sign Version 4 for Windows reg-sign and can be easily kept current because its modular structure allows straightforward access to embedded data sets for review and update

Optimization of Culture Parameters for Maximum Polyhydroxybutyrate Production by Selected Bacterial Strains Isolated from Rhizospheric Soils.

Science.gov (United States)

Lathwal, Priyanka; Nehra, Kiran; Singh, Manpreet; Jamdagni, Pragati; Rana, Jogender S

2015-01-01

The enormous applications of conventional non-biodegradable plastics have led towards their increased usage and accumulation in the environment. This has become one of the major causes of global environmental concern in the present century. Polyhydroxybutyrate (PHB), a biodegradable plastic is known to have properties similar to conventional plastics, thus exhibiting a potential for replacing conventional non-degradable plastics. In the present study, a total of 303 different bacterial isolates were obtained from soil samples collected from the rhizospheric area of three crops, viz., wheat, mustard and sugarcane. All the isolates were screened for PHB (Poly-3-hydroxy butyric acid) production using Sudan Black staining method, and 194 isolates were found to be PHB positive. Based upon the amount of PHB produced, the isolates were divided into three categories: high, medium and low producers. Representative isolates from each category were selected for biochemical characterization; and for optimization of various culture parameters (carbon source, nitrogen source, C/N ratio, different pH, temperature and incubation time periods) for maximizing PHB accumulation. The highest PHB yield was obtained when the culture medium was supplemented with glucose as the carbon source, ammonium sulphate at a concentration of 1.0 g/l as the nitrogen source, and by maintaining the C/N ratio of the medium as 20:1. The physical growth parameters which supported maximum PHB accumulation included a pH of 7.0, and an incubation temperature of 30 degrees C for a period of 48 h. A few isolates exhibited high PHB accumulation under optimized conditions, thus showing a potential for their industrial exploitation.

Assessment of the Eutrophication-Related Environmental Parameters in Two Mediterranean Lakes by Integrating Statistical Techniques and Self-Organizing Maps

Directory of Open Access Journals (Sweden)

Ekaterini Hadjisolomou

2018-03-01

Full Text Available During the last decades, Mediterranean freshwater ecosystems, especially lakes, have been under severe pressure due to increasing eutrophication and water quality deterioration. In this article, we compared the effectiveness of different data analysis methods by assessing the contribution of environmental parameters to eutrophication processes. For this purpose, principal components analysis (PCA, cluster analysis, and a self-organizing map (SOM were applied, using water quality data from two transboundary lakes of North Greece. SOM is considered as an advanced and powerful data analysis tool because of its ability to represent complex and nonlinear relationships among multivariate data sets. The results of PCA and cluster analysis agreed with the SOM results, although the latter provided more information because of the visualization abilities regarding the parameters’ relationships. Besides nutrients that were found to be a key factor for controlling chlorophyll-a (Chl-a, water temperature was related positively with algal production, while the Secchi disk depth parameter was found to be highly important and negatively related toeutrophic conditions. In general, the SOM results were more specific and allowed direct associations between the water quality variables. Our work showed that SOMs can be used effectively in limnological studies to produce robust and interpretable results, aiding scientists and managers to cope with environmental problems such as eutrophication.

Managing environmental and health impacts of uranium mining

Energy Technology Data Exchange (ETDEWEB)

Vance, R.E.; Cameron, R., E-mail: robert.vance@oecd.org, E-mail: ron.cameron@oecd.org [OECD Nuclear Energy Agency (France)

2014-07-01

As the raw material that fuels nuclear power plants that generate significant amounts of electricity with full life cycle carbon emissions as low as renewable energy sources, uranium is a valuable commodity. Yet uranium mining remains controversial, principally because of environmental and health impacts created when mining was undertaken by governments to meet Cold War strategic requirements. Uranium mining is conducted under significantly different circumstances today. Since the era of military production, societal expectations of environmental protection and the safety of workers and the public have evolved as the outcomes of the early era of mining became apparent, driving changes in regulatory oversight and mining practices. Key aspects of leading practice uranium mining are presented (conventional worker health and safety, worker radiation protection, public health and safety, water quality, tailings and waste rock management) and compared with historic practices to demonstrate the scale of differences. The application of additional aspects of uranium mine life cycle management (public consultation, environmental impact assessment, analysis of socio-economic impacts/benefits, environmental monitoring, financial assurance, product transport, security and safeguards, emergency planning and knowledge transfer), introduced as the industry matured, enhance overall management practices for the long term. Results from several case studies show that improved management of key aspects of uranium mining, combined with the incorporation of new life cycle parameters, have transformed the industry into the most regulated and arguably one of the safest and environmentally responsible types of mining in the world. (author)

Predictive value of different conventional and non-conventional MRI-parameters for specific domains of cognitive function in multiple sclerosis

Directory of Open Access Journals (Sweden)

Daniela Pinter

2015-01-01

Conclusions: The predictive value of distinct MRI-parameters differs for specific domains of cognitive function, with a greater impact of cortical volume, focal and diffuse white matter abnormalities on overall cognitive function, an additional role of basal ganglia iron deposition on cognitive efficiency, and thalamic and hippocampal volume on memory function. This suggests the usefulness of using multiparametric MRI to assess (microstructural correlates of different cognitive constructs.

Study of the impact of environmental parameters on the operation of CMS RPCs

CERN Document Server

Assran, Yasser

2011-01-01

CMS (Compact Muon Solenoid) is a general purpose detector designed to run at the highest luminosity at Large Hadron Collider (LHC), CERN, Geneva, Switzerland. The muon system of the CMS experiment relies on Drift Tubes (DT), Cathode Strip Chambers (CSC) and Resistive Plate Chambers (RPC). RPCs are dedicated for the first level muon trigger and they are characterized by bakelite electrodes delimited in a specialized gas volume filled with operational gas mixture. This analysis has been done for the RPC chambers installed in CMS experiment at CERN. The Currents of CMS RPCs chambers are analyzed as a function of environmental parameters such as Temperature, Humidity and pressure, which are important for the operation of the muon detector system. A novel Neural Network approach has been used to analyze the data and to build a model using experimental measurements and combining the results of the simulations. Data from RPC Chambers in CMS experiment are taken and compared to the results from neural Network.

New evaluation parameter for wearable thermoelectric generators

Science.gov (United States)

Wijethunge, Dimuthu; Kim, Woochul

2018-04-01

Wearable devices constitute a key application area for thermoelectric devices. However, owing to new constraints in wearable applications, a few conventional device optimization techniques are not appropriate and material evaluation parameters, such as figure of merit (zT) and power factor (PF), tend to be inadequate. We illustrated the incompleteness of zT and PF by performing simulations and considering different thermoelectric materials. The results indicate a weak correlation between device performance and zT and PF. In this study, we propose a new evaluation parameter, zTwearable, which is better suited for wearable applications compared to conventional zT. Owing to size restrictions, gap filler based device optimization is extremely critical in wearable devices. With respect to the occasions in which gap fillers are used, expressions for power, effective thermal conductivity (keff), and optimum load electrical ratio (mopt) are derived. According to the new parameters, the thermal conductivity of the material has become much more critical now. The proposed new evaluation parameter, namely, zTwearable, is extremely useful in the selection of an appropriate thermoelectric material among various candidates prior to the commencement of the actual design process.

Weak-value measurements can outperform conventional measurements

International Nuclear Information System (INIS)

Magaña-Loaiza, Omar S; Boyd, Robert W; Harris, Jérémie; Lundeen, Jeff S

2017-01-01

In this paper we provide a simple, straightforward example of a specific situation in which weak-value amplification (WVA) clearly outperforms conventional measurement in determining the angular orientation of an optical component. We also offer a perspective reconciling the views of some theorists, who claim WVA to be inherently sub-optimal for parameter estimation, with the perspective of the many experimentalists and theorists who have used the procedure to successfully access otherwise elusive phenomena. (invited comment)

DETERMINATION OF MINERAL COMPOSITION OF ORGANIC AND CONVENTIONAL BEVERAGES BY DISPERSIVE ENERGY X-RAY FLUORESCENCE SPECTROMETRY

Directory of Open Access Journals (Sweden)

L. CONSOLI

2012-11-01

Full Text Available Fruits are natural sources of minerals whose ingestion is recommended in a balanced diet. The increasing consumption of fruit-based beverages demands the development of rapid methods to evaluate their quality parameters. X-ray fluorescence spectrometry is an analytical-nuclear technique that is gaining space in the environmental and geological fields, and has been explored modestly in the food field. The main objective of this work was to develop a methodology to determine the mineral content of fruit-based beverages by applying this technique. Beverages manufactured from organic and conventional fruit varieties were evaluated, aiming to compare their nutritional value. The research was divided into three steps: in the first step, a direct measurement of the samples was made, that is, without prior preparation; in the second, standard curves were prepared with the elements of calcium and potassium, based on the category of ‘fine samples’. Lastly, these curves were used to determine concentrations of calcium and potassium in the samples of juices and pulps prepared as ‘fine samples’. The fine sample measurements showed results more exact compared to that obtained from the direct measurements. From the data evaluated, it was not possible to attribute better nutritional quality to either the organic or conventional samples.

Organic or Conventional Palm Oil. Mainstream sustainability standards vs. organic standards

OpenAIRE

Angulo, Jessenia

2014-01-01

Consumers are requesting more information about the nutritious characteristics, social and, environmental responsibility around the products they are purchasing; but instead of facing an organic mainstream movement, new conventional standards are in the market. This document presents the main differences in the field implementation between the RSPO and the organic certification.

Equally increased hypercoagulability irrespective of using minimized or conventional ECC systems

DEFF Research Database (Denmark)

Steinbrüchel, Ann S; Johansson, Pär I; Rafiq, Sulman

2012-01-01

Minimized extracorporeal circulation systems in coronary artery bypass may have less impairing effect on hematological parameters and bleeding compared to conventional systems. The aim of this study was to investigate whether the use of mini systems does result in an increased postoperative...

Transumbilical Thoracoscopy Versus Conventional Thoracoscopy for Lung Wedge Resection: Safety and Efficacy in a Live Canine Model.

Science.gov (United States)

Chen, Tzu-Ping; Yen-Chu; Wu, Yi-Cheng; Yeh, Chi-Ju; Liu, Chien-Ying; Hsieh, Ming-Ju; Yuan, Hsu-Chia; Ko, Po-Jen; Liu, Yun-Hen

2015-12-01

Transumbilical single-port surgery has been associated with less postoperative pain and offers better cosmetic outcomes than conventional 3-port laparoscopic surgery. This study compares the safety and efficacy of transumbilical thoracoscopy and conventional thoracoscopy for lung wedge resection. The animals (n = 16) were randomly assigned to the transumbilical thoracoscopic approach group (n = 8) or conventional thoracoscopic approach group (n = 8). Transumbilical lung resection was performed via an umbilical incision and a diaphragmatic incision. In the conventional thoracoscopic group, lung resection was completed through a thoracic incision. For both procedures, we compared the surgical outcomes, for example, operating time and operative complications; physiologic parameters, for example, respiratory rate and body temperature; inflammatory parameters, for example, white blood cell count; and pulmonary parameters, for example, arterial blood gas levels. The animals were euthanized 2 weeks after the surgery for gross and histologic evaluations. The lung wedge resection was successfully performed in all animals. There was no significant difference in the mean operating times or complications between the transumbilical and the conventional thoracoscopic approach groups. With regard to the physiologic impact of the surgeries, the transumbilical approach was associated with significant elevations in body temperature on postoperative day 1, when compared with the standard thoracoscopic approach. This study suggests that both approaches for performing lung wedge resection were comparable in efficacy and postoperative complications. © The Author(s) 2014.

Design parameters and source terms: Volume 1, Design parameters: Revision 0

International Nuclear Information System (INIS)

1987-09-01

The Design Parameters and Source Terms Document was prepared in accordance with DOE request and to provide data for the environmental impact study to be performed in the future for the Deaf Smith County, Texas site for a nuclear waste repository in salt. This document updates a previous unpublished report to the level of the Site Characterization Plan - Conceptual Design Report, SCP-CDR. The previous unpublished SCC Study identified the data needs for the Environmental Assessment effort for seven possible salt repository sites

Investigation on combustion parameters of palm biodiesel operating with a diesel engine

Directory of Open Access Journals (Sweden)

M.H.M. Yasin

2015-12-01

Full Text Available Biodiesel is a renewable and decomposable fuel which is derived from edible and non-edible oils. It has different properties compared to conventional diesel but can be used directly in diesel engines. Different fuel properties characterise different combustion-phasing parameters such as cyclic variations of Indicated Mean Effective Pressure (IMEP and maximum pressure (Pmax. In this study, cyclic variations of combustion parameters such as IMEP and Pmax were investigated using a multi-cylinder diesel engine operating with conventional diesel and palm biodiesel. The experiments were conducted using different engine loads; 20, 40, and 60% at a constant engine speed of 2500 rpm. The coefficient of variation (COV and standard deviation of parameters were used to evaluate the cyclic variations of the combustion phasing parameters for the test fuels at specific engine test conditions. It was observed that palm biodiesel has lower COV IMEP compared to conventional diesel but is higher in COV Pmax at higher engine loads respectively. In addition, palm biodiesel tends to have a higher recurrence for the frequency distribution for maximum pressure. It can be concluded from the study that the fuel properties of palm biodiesel have influenced most of the combustion parameters.

Towards integrating environmental performance in divisional performance measurement

Directory of Open Access Journals (Sweden)

Collins C Ngwakwe

2014-08-01

Full Text Available This paper suggests an integration of environmental performance measurement (EPM into conventional divisional financial performance measures as a catalyst to enhance managers’ drive toward cleaner production and sustainable development. The approach is conceptual and normative; and using a hypothetical firm, it suggests a model to integrate environmental performance measure as an ancillary to conventional divisional financial performance measures. Vroom’s motivation theory and other literature evidence indicate that corporate goals are achievable in an environment where managers’ efforts are recognised and thus rewarded. Consequently the paper suggests that environmentally motivated managers are important to propel corporate sustainability strategy toward desired corporate environmental governance and sustainable economic development. Thus this suggested approach modestly adds to existing environmental management accounting (EMA theory and literature. It is hoped that this paper may provide an agenda for further research toward a practical application of the suggested method in a firm.

Models and parameters for environmental radiological assessments

Energy Technology Data Exchange (ETDEWEB)

Miller, C W [ed.

1984-01-01

This book presents a unified compilation of models and parameters appropriate for assessing the impact of radioactive discharges to the environment. Models examined include those developed for the prediction of atmospheric and hydrologic transport and deposition, for terrestrial and aquatic food-chain bioaccumulation, and for internal and external dosimetry. Chapters have been entered separately into the data base. (ACR)

Models and parameters for environmental radiological assessments

International Nuclear Information System (INIS)

Miller, C.W.

1984-01-01

This book presents a unified compilation of models and parameters appropriate for assessing the impact of radioactive discharges to the environment. Models examined include those developed for the prediction of atmospheric and hydrologic transport and deposition, for terrestrial and aquatic food-chain bioaccumulation, and for internal and external dosimetry. Chapters have been entered separately into the data base

Genetic parameters, phenotypic, genotypic and environmental correlations and genetic variability on sunflower in the Brazilian Savannah

Directory of Open Access Journals (Sweden)

Ellen Grippi Lira

Full Text Available ABSTRACT: Sunflower (Helianthus annuus L. is an annual crop that stands out for its production of high quality oil and for an efficient selection, being necessary to estimate the components of genetic and phenotypic variance. This study aimed to estimate genetic parameters, phenotypic, genotypic and environmental correlations and genetic variability on sunflower in the Brazilian Savannah, evaluating the characters grain yield (YIELD, days to start flowering (DFL based on flowering date in R5, chapter length (CL, weight of a thousand achenes (WTA, plant height (H and oil content (OilC of 16 sunflower genotypes. The experiment was conducted at Embrapa Cerrados, Planaltina, DF, situated at 15º 35’ 30”S latitude, 47º 42’ 30”W longitude and 1.007m above sea level, in soil classified as dystroferric Oxisol. The experimental design used was a complete randomized block with four replicates. The nature for the effects of genotypes and blocks was fixed. Except for the character chapter length, genetic variance was the main component of the phenotypic variance among the genotypes, indicating high genetic variability and experimental efficiency with proper environmental control. In absolute terms, the genetic correlations were superior to phenotypic and environmental. The high values reported for heritability and selective accuracy indicated efficiency of phenotypic selection. Results showed high genetic variability among genotypes, which may contribute to the genetic improvement of sunflower.

Dry ice blasting as a substitution for the conventional electroplating pre-treatments

Directory of Open Access Journals (Sweden)

Uhlmann Eckart

2016-01-01

Full Text Available For high quality electroplated products, surfaces must be thoroughly pre-treated. For this purpose electroplating currently needs a variety of chemical baths. The used chemicals are injurious to health and harmful to the environment. In addition, the conventional pre-treatment has a long process time which results in high costs. Dry ice blasting alone or in combination with other processes has the potential to completely substitute these conventional pre-treatment processes. Three process sequences as pre-treatment methods prior to electroplating were investigated on the aluminium alloys AlSi12 and AlMg3. The used processes are dry ice blasting, tempering during dry ice blasting and glass bead blasting followed by dry ice blasting. The influence of the parameters on the surface roughness, surface topography and surface tension of the workpieces was examined. A model to describe the correlation between the dry ice blasting parameters and surface parameters was developed. Finally, an adhesion test of electroplated specimen was conducted in order to determine the suitability of these alternative pre-treatment processes.

The raw milk quality from organic and conventional agriculture

Directory of Open Access Journals (Sweden)

Juraj Čuboň

2008-01-01

Full Text Available In the experiment the parameters of milk quality from organic and conventional dairy farm were analyzed. The number of somatic cells was 219. 103 . ml−1 in the organic milk and 242. 103 . ml−1 in the conventional milk. It seems that conditions of organic farming could be able to have a positive effect of health of mammary gland. We found the highest number of somatic cells at the end of the year (336.103 . ml−1 in organic milk in December, respectively 336.103 . ml−1 in conventional milk in November. The total bacteria count was higher in organic milk (86.103 CFU . ml−1 than conventional (51.103 CFU . ml−1 likewise the number of coliform bacteria. Number of coliform bacteria was by conventional milk under 1000 CFU . ml−1 for all samples. The highest number of coliform bacteria in organic milk was achieved in February (1000 CFU . ml−1. We found higher content of fat (4.23 g . 100g−1 and protein (3.41 g . 100g−1 by organic milk in comparison with the conventional milk (4.11 g . 100g−1, resp. 3.39 g . 100g−1. The higher content of protein and fat in organic milk and the higher protein content in conventional milk were determined in December. The heat resistance was determined by 96 % ethanol required to coagulation of 2 ml of milk. The conventional milk has significantly lower heat resistance (1.38 ml than the organic one (1.86 ml. Better heat stability by organic milk and higher content of Ca (144.29 mg . 100g−1 correspond with higher technological quality of organic milk.

[Weight parameters of water quality impact and risk grade determination of water environmental sensitive spots in Jiashan].

Science.gov (United States)

Xie, Rong-Rong; Pang, Yong; Zhang, Qian; Chen, Ke; Sun, Ming-Yuan

2012-07-01

For the safety of the water environment in Jiashan county in Zhejiang Province, one-dimensional hydrodynamic and water quality models are established based on three large-scale monitoring of hydrology and water quality in Jiashan county, three water environmental sensitive spots including Hongqitang dam Chijia hydrological station and Luxie pond are selected to investigate weight parameters of water quality impact and risk grade determination. Results indicate as follows (1) Internal pollution impact in Jiashan areas was greater than the external, the average weight parameters of internal chemical oxygen demand (COD) pollution is 55.3%, internal ammonia nitrogen (NH(4+)-N) is 67.4%, internal total phosphor (TP) is 63.1%. Non-point pollution impact in Jiashan areas was greater than point pollution impact, the average weight parameters of non-point COD pollutions is 53.7%, non-point NH(4+)-N is 65.9%, non-point TP is 57.8%. (2) The risk of Hongqitang dam and Chijia hydrological station are in the middle risk. The risk of Luxie pond is also in the middle risk in August, and in April and December the risk of Luxie pond is low. The strategic decision will be suggested to guarantee water environment security and social and economic security in the study.

Improving the environmental profile of wood panels via co-production of ethanol and acetic acid.

Science.gov (United States)

Earles, J Mason; Halog, Anthony; Shaler, Stephen

2011-11-15

The oriented strand board (OSB) biorefinery is an emerging technology that could improve the building, transportation, and chemical sectors' environmental profiles. By adding a hot water extraction stage to conventional OSB panel manufacturing, hemicellulose polysaccharides can be extracted from wood strands and converted to renewably sourced ethanol and acetic acid. Replacing fossil-based gasoline and acetic acid has the potential to reduce greenhouse gas (GHG) emissions, among other possible impacts. At the same time, hemicellulose extraction could improve the environmental profile of OSB panels by reducing the level of volatile organic compounds (VOCs) emitted during manufacturing. In this study, the life cycle significance of such GHG, VOC, and other emission reductions was investigated. A process model was developed based on a mix of laboratory and industrial-level mass and energy flow data. Using these data a life cycle assessment (LCA) model was built. Sensitive process parameters were identified and used to develop a target production scenario for the OSB biorefinery. The findings suggest that the OSB biorefinery's deployment could substantially improve human and ecosystem health via reduction of select VOCs compared to conventionally produced OSB, gasoline, and acetic acid. Technological advancements are needed, however, to achieve desirable GHG reductions.

Strategies for enumeration of circulating microvesicles on a conventional flow cytometer: Counting beads and scatter parameters.

Science.gov (United States)

Alkhatatbeh, Mohammad J; Enjeti, Anoop K; Baqar, Sara; Ekinci, Elif I; Liu, Dorothy; Thorne, Rick F; Lincz, Lisa F

2018-01-01

Enumeration of circulating microvesicles (MVs) by conventional flow cytometry is accomplished by the addition of a known amount of counting beads and calculated from the formula: MV/μl = (MV count/bead count) × final bead concentration. We sought to optimize each variable in the equation by determining the best parameters for detecting 'MV count' and examining the effects of different bead preparations and concentrations on the final calculation. Three commercially available bead preparations (TruCount, Flow-Count and CountBright) were tested, and MV detection on a BD FACSCanto was optimized for gating by either forward scatter (FSC) or side scatter (SSC); the results were compared by calculating different subsets of MV on a series of 74 typical patient plasma samples. The relationship between the number of beads added to each test and the number of beads counted by flow cytometry remained linear over a wide range of bead concentrations ( R 2 ≥ 0.997). However, TruCount beads produced the most consistent (concentration variation = 3.8%) calculated numbers of plasma CD41 + /Annexin V + MV, which were significantly higher from that calculated using either Flow-Count or CountBright ( p beads by FSC and 0.16 μm beads by SSC, but there were significantly more background events using SSC compared with FSC (3113 vs. 470; p = 0.008). In general, sample analysis by SSC resulted in significantly higher numbers of MV ( p beads provided linear results at concentrations ranging from 6 beads/μl to 100 beads/μl, but TruCount was the most consistent. Using SSC to gate MV events produced high background which negatively affected counting bead enumeration and overall MV calculations. Strategies to reduce SSC background should be employed in order to reliably use this technique.

(C-V) and y-parameters determination of JFETs under different environmental conditions

Energy Technology Data Exchange (ETDEWEB)

El-Ghanam, S.M., E-mail: safaaghanam@yahoo.co [Women' s College for Art, Science and Education, Ain-Shams University, Heliopolis, Cairo (Egypt)

2010-10-01

The C-V characteristics of n-channel JFET have been measured under different environmental conditions of temperature up to 140 deg. C and {gamma}-rays up to 100 kGy. For low bias voltage and frequency, the input capacitance, C{sub iss}, is shown to be a direct function of temperature. On the other hand, its value was shown to decrease from 11.68 down to 8.17 nF due to {gamma}-exposure up to 100 kGy. The y-parameters of common source amplifier were calculated under the influence of temperature and {gamma}-rays. The results show that the susceptance component of the admittance increases due to increase in temperature, while decreasing after {gamma}-exposure. Considering the cutoff frequency f{sub T0}, it is clear that as the temperature increases from 30 up to 140 deg. C, f{sub T0} dropped from 47 MHz down to 5 MHz, measured at 0.8 V. On the other hand its value was shown to increase from 43 MHz up to 102 MHz, measured at the same bias voltage, due to {gamma}-exposure up to 100 kGy.

Quantifying the ability of environmental parameters to predict soil texture fractions using regression-tree model with GIS and LIDAR data

DEFF Research Database (Denmark)

Greve, Mogens Humlekrog; Bou Kheir, Rania; Greve, Mette Balslev

2012-01-01

Soil texture is an important soil characteristic that drives crop production and field management, and is the basis for environmental monitoring (including soil quality and sustainability, hydrological and ecological processes, and climate change simulations). The combination of coarse sand, fine...... sand, silt, and clay in soil determines its textural classification. This study used Geographic Information Systems (GIS) and regression-tree modeling to precisely quantify the relationships between the soil texture fractions and different environmental parameters on a national scale, and to detect...... precipitation, seasonal precipitation to statistically explain soil texture fractions field/laboratory measurements (45,224 sampling sites) in the area of interest (Denmark). The developed strongest relationships were associated with clay and silt, variance being equal to 60%, followed by coarse sand (54...

Investigating changes in land use cover and associated environmental parameters in Taihu Lake in recent decades using remote sensing and geochemistry.

Directory of Open Access Journals (Sweden)

Changchun Huang

Full Text Available Humans have had a significant impact on the terrestrial pedosphere through activities such as agriculture and urbanization. The effects of human activities on land use and the related environmental changes were investigated through point and areal studies surrounding Meiliang Bay, which is an open area of extreme eutrophication in Taihu Lake, China. This study used remote sensing and environmental-tracer profiles [total nitrogen (TN, total phosphorus (TP, total organic carbon (TOC, grain size, and geochemical parameters] to determine the causes of changes in land use and the associated environmental parameters. The results of LUCCs (Land use/cover changes indicate that over the past three decades, total farmland decreased by 862.49 km2, with an annual decrement rate of 28.75 km2/year, and total urbanized land increased by 859.71 km2, with an annual growth rate of 28.66 km2/year. The geochemical results indicate that the trophic state of Taihu Lake was persistently intensifying and that the TN, TP, and TOC concentrations increased twofold, threefold, and twofold, respectively, from 1949 to 2010. The sources of TN, TP, and TOC were highly similar after 1975. However, before 1974, TN and TP originated from different sources than TOC. The grassland and woodland around the lake retain nutrients and sand from the land of study area. The increase in urbanized land and tertiary industries significantly increased the sediment concentrations of TN, TP, and TOC after 1980.

On the quantitative relationships between environmental parameters and heavy metals pollution in Mediterranean soils using GIS regression-trees

DEFF Research Database (Denmark)

Bou Kheir, Rania; Shomar, B.; Greve, Mogens Humlekrog

2014-01-01

Soil heavy metal pollution has been and continues to be a worldwide phenomenon that has attracted a great deal of attention from governments and regulatory bodies. In this context, our study used Geographic Information Systems (GIS) and regression-tree modeling (196 trees) to precisely quantify...... the relationships between four toxic heavy metals (Ni, Cr, Cd and As) and sixteen environmental parameters (e.g., parent material, slope gradient, proximity to roads, etc.) in the soils of northern Lebanon (as a case study of Mediterranean landscapes), and to detect the most important parameters that can be used...... between 68% and 100%), surroundings of waste areas (48 – 92%), proximity to roads (45 – 82%) and parent materials (57 – 73%) considerably influenced all investigated heavy metals, which is not the case of hydromorphological and soil properties. For instance, hydraulic conductivity (18 – 41%) and pH (23...

Environmental parameters influence on the dynamics of total and pathogenic Vibrio parahaemolyticus densities in Crassostrea virginica harvested from Mexico’s Gulf coast

International Nuclear Information System (INIS)

López-Hernández, Karla M.; Pardío-Sedas, Violeta T.; Lizárraga-Partida, Leonardo; Williams, José de J.; Martínez-Herrera, David; Flores-Primo, Argel; Uscanga-Serrano, Roxana; Rendón-Castro, Karla

2015-01-01

Highlights: • V. parahaemolyticus densities in oysters were isolated in spring and winter seasons. • Pathogenic genes abundances varied with environmental parameters seasonal changes. • Water temperature modulated V. parahaemolyticus abundance during reduced salinities. • V. parahaemolyticus with potentially pathogenic genes raises important health issues. - Abstract: The influence of environmental parameters on the total and pathogenic Vibrio parahaemolyticus seasonal densities in American oysters (Crassostrea virginica) was evaluated for 1 year. Harvesting site A yielded the highest mean densities of V. parahaemolyticus tlh+, tdh+/trh−, tdh−/trh+ and tdh+/trh+ during spring season at 2.57, 1.74, 0.36, and −0.40 log 10 MPN/g, respectively, and tdh+/orf8+ during winter season (0.90 log 10 MPN/g). V. parahaemolyticus tlh+ densities were associated to salinity (R 2 = 0.372, P < 0.022), tdh+/trh+ to turbidity (R 2 = 0.597, P < 0.035), and orf8+ to temperature, salinity, and pH (R 2 = 0.964, P < 0.001). The exposure to salinity and temperature conditions during winter and spring seasons regulated the dynamics of V. parahaemolyticus harboring potentially pathogenic genotypes within the oyster. The adaptive response of V. parahaemolyticus to seasonal environmental changes may lead to an increase in survival and virulence, threatening the seafood safety and increasing the risk of illness

Environmental impacts of renewable energy sources

International Nuclear Information System (INIS)

Abbasi, S.A.; Abbasi, N.

1997-01-01

The global attention has always been focused on the adverse environmental impacts of conventional energy sources. In contrast nonconventional energy sources, particularly the renewable ones, have enjoyed a clean image vis a vis environmental impacts. The only major exception to this general trend has been large hydropower projects; experience has taught that they can be disastrous for the environment. The belief now is that mini hydro and microhydro projects are harmless alternatives. But are renewable energy sources really as benign as is widely believed? The present essay addresses this question in the background of Lovin's classical paradigm which had postulated the hard (malignant) and soft (benign) energy concepts in the first place. It then critically evaluates the environmental impacts of major renewable energy sources. It then comes up with the broad conclusion that renewable energy sources are not the panacea they are popularly perceived to be; indeed in some cases their adverse environmental impacts can be as strongly negative as the impacts of conventional energy sources. The paper also dwells on the steps needed to utilize renewable energy sources without facing environmental backlashes of the type experienced from hydropower projects

Environmental Impacts of a Multi-Borehole Geothermal System: Model Sensitivity Study

Science.gov (United States)

Krol, M.; Daemi, N.

2017-12-01

Problems associated with fossil fuel consumption has increased worldwide interest in discovering and developing sustainable energy systems. One such system is geothermal heating, which uses the constant temperature of the ground to heat or cool buildings. Since geothermal heating offers low maintenance, high heating/cooling comfort, and a low carbon footprint, compared to conventional systems, there has been an increasing trend in equipping large buildings with geothermal heating. However, little is known on the potential environmental impact geothermal heating can have on the subsurface, such as the creation of subsurface thermal plumes or changes in groundwater flow dynamics. In the present study, the environmental impacts of a closed-loop, ground source heat pump (GSHP) system was examined with respect to different system parameters. To do this a three-dimensional model, developed using FEFLOW, was used to examine the thermal plumes resulting from ten years of operation of a vertical closed-loop GSHP system with multiple boreholes. A required thermal load typical of an office building located in Canada was calculated and groundwater flow and heat transport in the geological formation was simulated. Consequently, the resulting thermal plumes were studied and a sensitivity analysis was conducted to determine the effect of different parameters like groundwater flow and soil type on the development and movement of thermal plumes. Since thermal plumes can affect the efficiency of a GSHP system, this study provides insight into important system parameters.

Bias-Corrected Estimation of Noncentrality Parameters of Covariance Structure Models

Science.gov (United States)

Raykov, Tenko

2005-01-01

A bias-corrected estimator of noncentrality parameters of covariance structure models is discussed. The approach represents an application of the bootstrap methodology for purposes of bias correction, and utilizes the relation between average of resample conventional noncentrality parameter estimates and their sample counterpart. The…

Positron range in PET imaging: non-conventional isotopes

International Nuclear Information System (INIS)

Jødal, L; Le Loirec, C; Champion, C

2014-01-01

In addition to conventional short-lived radionuclides, longer-lived isotopes are becoming increasingly important to positron emission tomography (PET). The longer half-life both allows for circumvention of the in-house production of radionuclides, and expands the spectrum of physiological processes amenable to PET imaging, including processes with prohibitively slow kinetics for investigation with short-lived radiotracers. However, many of these radionuclides emit ‘high-energy’ positrons and gamma rays which affect the spatial resolution and quantitative accuracy of PET images. The objective of the present work is to investigate the positron range distribution for some of these long-lived isotopes. Based on existing Monte Carlo simulations of positron interactions in water, the probability distribution of the line of response displacement have been empirically described by means of analytic displacement functions. Relevant distributions have been derived for the isotopes 22 Na, 52 Mn, 89 Zr, 45 Ti, 51 Mn, 94m Tc, 52m Mn, 38 K, 64 Cu, 86 Y, 124 I, and 120 I. It was found that the distribution functions previously found for a series of conventional isotopes (Jødal et al 2012 Phys. Med. Bio. 57 3931–43), were also applicable to these non-conventional isotopes, except that for 120 I, 124 I, 89 Zr, 52 Mn, and 64 Cu, parameters in the formulae were less well predicted by mean positron energy alone. Both conventional and non-conventional range distributions can be described by relatively simple analytic expressions. The results will be applicable to image-reconstruction software to improve the resolution. (paper)

Sweden's third national report under the the Convention on Nuclear Safety. Swedish implementation of the obligations of the Convention

International Nuclear Information System (INIS)

2004-01-01

The national reports to the review meetings according to Article 5 of the Convention call for a self-assessment of each Contracting Party with regard to compliance with the obligations of the Convention. For Sweden this self-assessment has demonstrated full compliance with all the obligations of the Convention, as shown in detail in part B of this national report. There is an open and constructive dialogue between the regulatory bodies and the licensees. The owner companies are well established with good corporate financial records. They demonstrate a commitment to maintain a high level of safety in their nuclear power plants. Not withstanding the increased competition, the licensees continue to co-operate in solving important safety issues. The regulators in Sweden are assessed as well qualified for their tasks and their resources have been maintained. The international co-operation networks of both regulators and utilities are well developed. From the safety and environmental impact point of view, the Swedish nuclear power plants are competitive internationally. However, Sweden would like to point out the following issues, where further development should be given special attention in relation to the obligations under the Convention: The compatibility of the Act on Nuclear Activities with the Environmental Code needs to be followed up in order to assure that the licensing process is fully consistent. The future supply of radiation protection specialists needs to be further investigated and measures may need to be taken, as has been done to ensure the supply or nuclear safety specialists. The ongoing concentration of vendors and service companies needs to be assessed, from the safety and availability point of view, and the licensees may need to implement their own joint solutions if the market can not supply the necessary services at acceptable conditions. The operating organisations need to assess their consolidation after several organisational changes following

Environmental impacts of cultured meat production.

Science.gov (United States)

Tuomisto, Hanna L; de Mattos, M Joost Teixeira

2011-07-15

Cultured meat (i.e., meat produced in vitro using tissue engineering techniques) is being developed as a potentially healthier and more efficient alternative to conventional meat. Life cycle assessment (LCA) research method was used for assessing environmental impacts of large-scale cultured meat production. Cyanobacteria hydrolysate was assumed to be used as the nutrient and energy source for muscle cell growth. The results showed that production of 1000 kg cultured meat requires 26-33 GJ energy, 367-521 m(3) water, 190-230 m(2) land, and emits 1900-2240 kg CO(2)-eq GHG emissions. In comparison to conventionally produced European meat, cultured meat involves approximately 7-45% lower energy use (only poultry has lower energy use), 78-96% lower GHG emissions, 99% lower land use, and 82-96% lower water use depending on the product compared. Despite high uncertainty, it is concluded that the overall environmental impacts of cultured meat production are substantially lower than those of conventionally produced meat.

Globalization of environmental regulations for offshore E & P operations

Energy Technology Data Exchange (ETDEWEB)

Shannon, B.E.

1995-12-31

One of the enduring legacies of the Rio Environmental Summit of 1992 (United Nations Conference on Environment and Development, UNCED) is Agenda 21 (Chapter 17 - Protection of the Oceans), which among other things called for the assessment of the need for a global authority to regulate offshore Exploration & Production (E&P) discharges, emissions and safety. Despite advice to the contrary from the International Maritime Organization (IMO), interest is building within the European community for the standardization of regulations for offshore E&P activities. Several international of regulations for offshore E&P activities. Several international frameworks or forums have been mentioned as possible candidates. These include the United Nations Convention on the Law of the Sea, 1982 (UNCLOS); London Convention 1972 (LC 1972) and the International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978 (MARPOL) 73/78. International offshore oil and gas operators operate within requirements of regional conventions under the United Nations Environmental Program`s (UNEP) - Regional Seas Program. Domestic offshore operations are undertaken under the auspices of the U.S. Environmental Protection Agency and Minerals Management Service.

The estimation of soil parameters using observations on crop biophysical variables and the crop model STICS improve the predictions of agro environmental variables.

Science.gov (United States)

Varella, H.-V.

2009-04-01

Dynamic crop models are very useful to predict the behavior of crops in their environment and are widely used in a lot of agro-environmental work. These models have many parameters and their spatial application require a good knowledge of these parameters, especially of the soil parameters. These parameters can be estimated from soil analysis at different points but this is very costly and requires a lot of experimental work. Nevertheless, observations on crops provided by new techniques like remote sensing or yield monitoring, is a possibility for estimating soil parameters through the inversion of crop models. In this work, the STICS crop model is studied for the wheat and the sugar beet and it includes more than 200 parameters. After a previous work based on a large experimental database for calibrate parameters related to the characteristics of the crop, a global sensitivity analysis of the observed variables (leaf area index LAI and absorbed nitrogen QN provided by remote sensing data, and yield at harvest provided by yield monitoring) to the soil parameters is made, in order to determine which of them have to be estimated. This study was made in different climatic and agronomic conditions and it reveals that 7 soil parameters (4 related to the water and 3 related to the nitrogen) have a clearly influence on the variance of the observed variables and have to be therefore estimated. For estimating these 7 soil parameters, a Bayesian data assimilation method is chosen (because of available prior information on these parameters) named Importance Sampling by using observations, on wheat and sugar beet crop, of LAI and QN at various dates and yield at harvest acquired on different climatic and agronomic conditions. The quality of parameter estimation is then determined by comparing the result of parameter estimation with only prior information and the result with the posterior information provided by the Bayesian data assimilation method. The result of the

Life cycle environmental impacts of UK shale gas

International Nuclear Information System (INIS)

Stamford, Laurence; Azapagic, Adisa

2014-01-01

Highlights: • First full life cycle assessment of shale gas used for electricity generation. • Comparison with coal, conventional and liquefied gas, nuclear, wind and solar PV. • Shale gas worse than coal for three impacts and better than renewables for four. • It has higher photochemical smog and terrestrial toxicity than the other options. • Shale gas a sound environmental option only if accompanied by stringent regulation. - Abstract: Exploitation of shale gas in the UK is at a very early stage, but with the latest estimates suggesting potential resources of 3.8 × 10 13 cubic metres – enough to supply the UK for next 470 years – it is viewed by many as an exciting economic prospect. However, its environmental impacts are currently unknown. This is the focus of this paper which estimates for the first time the life cycle impacts of UK shale gas, assuming its use for electricity generation. Shale gas is compared to fossil-fuel alternatives (conventional gas and coal) and low-carbon options (nuclear, offshore wind and solar photovoltaics). The results suggest that the impacts range widely, depending on the assumptions. For example, the global warming potential (GWP100) of electricity from shale gas ranges from 412 to 1102 g CO 2 -eq./kWh with a central estimate of 462 g. The central estimates suggest that shale gas is comparable or superior to conventional gas and low-carbon technologies for depletion of abiotic resources, eutrophication, and freshwater, marine and human toxicities. Conversely, it has a higher potential for creation of photochemical oxidants (smog) and terrestrial toxicity than any other option considered. For acidification, shale gas is a better option than coal power but an order of magnitude worse than the other options. The impact on ozone layer depletion is within the range found for conventional gas, but nuclear and wind power are better options still. The results of this research highlight the need for tight regulation and

Environmental risk analysis

International Nuclear Information System (INIS)

Lima-e-Silva, Pedro Paulo de

1996-01-01

The conventional Risk Analysis (RA) relates usually a certain undesired event frequency with its consequences. Such technique is used nowadays in Brazil to analyze accidents and their consequences strictly under the human approach, valuing loss of human equipment, human structures and human lives, without considering the damage caused to natural resources that keep life possible on Earth. This paradigm was developed primarily because of the Homo sapiens' lack of perception upon the natural web needed to sustain his own life. In reality, the Brazilian professionals responsible today for licensing, auditing and inspecting environmental aspects of human activities face huge difficulties in making technical specifications and procedures leading to acceptable levels of impact, furthermore considering the intrinsic difficulties to define those levels. Therefore, in Brazil the RA technique is a weak tool for licensing for many reasons, and of them are its short scope (only accident considerations) and wrong a paradigm (only human direct damages). A paper from the author about the former was already proposed to the 7th International Conference on Environmetrics, past July'96, USP-SP. This one discusses the extension of the risk analysis concept to take into account environmental consequences, transforming the conventional analysis into a broader methodology named here as Environmental Risk Analysis. (author)

Environmental policy without costs? A review of the Porter hypothesis

Energy Technology Data Exchange (ETDEWEB)

Braennlund, Runar; Lundgren, Tommy. e-mail: runar.brannlund@econ.umu.se

2009-03-15

This paper reviews the theoretical and empirical literature connected to the so called Porter Hypothesis. That is, to review the literature connected to the discussion about the relation between environmental policy and competitiveness. According to the conventional wisdom environmental policy, aiming for improving the environment through for example emission reductions, do imply costs since scarce resources must be diverted from somewhere else. However, this conventional wisdom has been challenged and questioned recently through what has been denoted the 'Porter hypothesis'. Those in the forefront of the Porter hypothesis challenge the conventional wisdom basically on the ground that resources are used inefficiently in the absence of the right kind of environmental regulations, and that the conventional neo-classical view is too static to take inefficiencies into account. The conclusions that can be made from this review is (1) that the theoretical literature can identify the circumstances and mechanisms that must exist for a Porter effect to occur, (2) that these circumstances are rather non-general, hence rejecting the Porter hypothesis in general, (3) that the empirical literature give no general support for the Porter hypothesis. Furthermore, a closer look at the 'Swedish case' reveals no support for the Porter hypothesis in spite of the fact that Swedish environmental policy the last 15-20 years seems to be in line the prerequisites stated by the Porter hypothesis concerning environmental policy

Developmental neurotoxicity: methylmercury and prenatal exposure protection in the context of the Minamata Convention

Directory of Open Access Journals (Sweden)

Ana Boischio

2015-09-01

Full Text Available Mercury is a global pollutant of public environmental health concern due to its long-range atmospheric distribution, environmental distribution, and neurotoxic effects. Following biological methylation, methylmercury (MeHg can be un-evenly bioaccumulated within aquatic food chains. Fish consumption can be a significant route of human exposure to MeHg. MeHg exposure in the prenatal stage, at relatively low levels, has recently been established as harmful during neurological development, potentially leading to intellectual disability. The Minamata Convention on Mercury is a global agreement, currently under ratification, to protect human health and the environment from anthropogenic emissions and releases of mercury and mercury compounds. The resolution regarding the role of the World Health Organization and ministries of health in the implementation of the Convention includes protection of human health from critical exposures to MeHg. Riverside populations living in areas with artisanal small-scale gold mining, and relying heavily on fish consumption, have been identified as the most vulnerable population in terms of MeHg exposure and developmental neurotoxicity. This article focuses on the proper design and dissemination of fish advisories within the context of implementation of the Convention.

Evaluation of average glandular dose in digital and conventional systems of the mammography

International Nuclear Information System (INIS)

Xavier, Aline C.S.; Barros, Vinicius S.M.; Khoury, Hellen J.

2014-01-01

Mammography is currently the most effective method of diagnosis and detection of breast pathologies. The main interest in this kid of exam comes from the high incidence rate of breast cancer and necessity of high quality images for accurate diagnosis. Digital mammography systems have several advantages compared to conventional systems, however the use of digital imaging systems is not always integrated to an image acquisition protocol. Therefore, it is questionable if digital systems truly reduce the dose received by the patient, because many times is introduced in the clinics without optimization of the image acquisition protocols. The aim of this study is to estimate the value of incident air Kerma and average glandular dose (AGD) in patients undergoing conventional and digital mammography systems in Recife. This study was conducted with 650 patients in three hospitals. The value of incident air Kerma was estimated from the measurement of the yield of equipment and irradiation parameters used for each patient. From these results and using the methodology proposed by Dance et al. the value of the average glandular dose was calculated. The results obtained show that the lowest value of AGD was found with conventional screen-film system, indicating that the parameters for image acquisition with digital systems are not optimized. It was also observed that the institutions with digital systems use lower breast compression values than the conventional. (author)

THE CITIZENS’ PUBLIC PARTICIPATION UNDER EUROPEAN UNION LAW AND ENVIRONMENTAL LAW

Directory of Open Access Journals (Sweden)

Valentine Charlotte ENE

2014-06-01

Full Text Available Convention on Access to Information, Public Participation in Decision-Making and Access to Justice in Environmental Matters, June 25, 1998 (entered into force Oct. 30, 2001 [hereinafter Aarhus Convention], negotiated under the auspices of the UN/ECE (United Nations Economic Commission for Europe, is the result of the efforts to establish international legal standards in the field of citizens’ environmental rights to date. Also, it is the first international document about public participation in environmental matters, developing the principle 10 of the Rio Declaration, which stresses the need for citizen's participation in environmental issues and for access to information on the environment held by public authorities. Public participation, one of the three main pillars provided by Aarhus Convention, could be one of the key factors in involving the citizens in the protection of the environment and strengthening compliance and enforcement of national and European environmental law. Under European Union regulations, the right to participate in environmental decision-making process could be exercise more effectively based on European Citizens’ Initiative (ECI procedure. Therefore, the European Citizens' Initiative (ECI, as introduced by the Lisbon Treaty, allows citizens to request new EU legislation once a million signatures from seven member states have been collected asking the European Commission to do so. This paper explores environmental citizenship within the framework of European Union (EU environmental law.

Environmental monitoring of Domingo Rubio stream (Huelva Estuary, SW Spain) by combining conventional biomarkers and proteomic analysis in Carcinus maenas

Energy Technology Data Exchange (ETDEWEB)

Montes Nieto, Rafael [Department of Biochemistry and Molecular Biology, University of Cordoba, Severo Ochoa Building, Rabanales Campus, Highway A4 Km 396a, 14071 Cordoba (Spain); Garcia-Barrera, Tamara; Gomez-Ariza, Jose-Luis [Department of Chemistry and Materials Sciences, University of Huelva, Faculty of Experimental Sciences, El Carmen Campus, 21007 Huelva (Spain); Lopez-Barea, Juan, E-mail: bb1lobaj@uco.e [Department of Biochemistry and Molecular Biology, University of Cordoba, Severo Ochoa Building, Rabanales Campus, Highway A4 Km 396a, 14071 Cordoba (Spain)

2010-02-15

Element load, conventional biomarkers and altered protein expression profiles were studied in Carcinus maenas crabs, to assess contamination of 'Domingo Rubio' stream, an aquatic ecosystem that receives pyritic metals, industrial contaminants, and pesticides. Lower antioxidative activities - glucose-6-phosphate and 6-phosphogluconate dehydrogenases, catalase - were found in parallel to higher levels of damaged biomolecules - malondialdehyde, oxidized glutathione -, due to oxidative lesions promoted by contaminants, as the increased levels of essential - Zn, Cu, Co - and nonessential - Cr, Ni, Cd - elements. Utility of Proteomics to assess environmental quality was confirmed, especially after considering the six proteins identified by de novo sequencing through capLC-muESI-ITMS/MS and homology search on databases. They include tripartite motif-containing protein 11 and ATF7 transcription factor (upregulated), plus CBR-NHR-218 nuclear hormone receptor, two components of the ABC transporters and aldehyde dehydrogenase (downregulated). These proteins could be used as novel potential biomarkers of the deleterious effects of pollutants present in the area. - Pollution assessment at 'Domingo Rubio' stream (Spain).

Analysis of the influence of infeed rate and cutting fluid on cylindrical grinding processes using a conventional wheel

Directory of Open Access Journals (Sweden)

Bianchi Eduardo Carlos

2004-01-01

Full Text Available New worldwide trends such as globalization have rendered grinding processes increasingly important for industry, making it essential to perform in-depth studies of variations in grinding process parameters in the pursuit of greater cost effectiveness. This paper presents a comparative analysis of three different infeed rates, using a conventional grinding wheel on quenched and tempered D2 steel workpieces. Higher infeed rates are known to be correlated with shorter grinding times, rendering the process more economically attractive. Two different coolant fluids, 5% emulsion and pure oil, were used. The tests were carried out using the smallest possible amount of coolant and an optimized 5 mm diameter nozzle. The parameters analyzed were tangential force, specific energy, acoustic emission, roundness error and surface roughness. The surfaces of the workpieces were also examined by scanning electron microscopy (SEM. The results revealed that increased infeed rates could reduce processing times without compromising the quality of the workpiece profile, thereby reducing the cost of the process. The best cutting fluid, albeit more harmful to human health and less environmentally friendly, was found to be pure oil.

Use of environmental parameters to explain the variability in ...

African Journals Online (AJOL)

Abstract. This study attempts to explain the variability in recruitment of sardine in the northern Benguela and to develop potential models by including environmental information to predict recruitment. ... AJOL African Journals Online. HOW TO ...

Radiosurgical fistulotomy; an alternative to conventional procedure in fistula in ano.

Science.gov (United States)

Gupta, Pravin J

2003-01-01

Most surgeons continue to prefer the classic lay open technique [fistulotomy] as the gold standard of treatment in anal fistula. In this randomized study, a comparison is made between conventional fistulotomy and fistulotomy performed by a radio frequency device. One hundred patients of low anal fistula posted for fistulotomy were randomized prospectively to either a conventional or radio frequency technique. Parameters measured included time taken for the procedure, amount of blood loss, postoperative pain, return to work, and recurrence rate. The patient demographic was comparable in 2 groups. The radio frequency fistulotomy was quicker as compared to a conventional one [22 versus 37 minutes, p = 0.001], amount of bleeding was significantly less [47 ml versus 134 ml, p = 0.002], and hospital stay was less when patient was operated by radio frequency method [37 hours versus 56 hours in conventional method, p = 0.001]. The postoperative pain in the first 24 hours was more in conventional group [2 to 5 versus 0 to 3 on visual analogue scale]. The patients from radio frequency group resumed their duties early with a reduced healing period of the wounds [47 versus 64 days, p = 0.01]. The recurrence or failure rates were comparable in the radio frequency and conventional groups [2% versus 6%]. Fistulotomy procedure using a radio frequency technique has significant advantages over a conventional procedure with regard to operation time, blood loss, return to normal activity, and healing time of the wound.

Co-variation of Cholera with Climatic and Environmental Parameters ...

African Journals Online (AJOL)

adjusted cholera cases and coastal ocean chlorophyll a and, to some degree, sea surface temperature, the ... environmental variables, such as air and water temperature, rainfall ... nutrients and plankton biomass (Vezulli et al., 2010). Water ...

A Novel Artificial Fish Swarm Algorithm for Recalibration of Fiber Optic Gyroscope Error Parameters

Directory of Open Access Journals (Sweden)

Yanbin Gao

2015-05-01

Full Text Available The artificial fish swarm algorithm (AFSA is one of the state-of-the-art swarm intelligent techniques, which is widely utilized for optimization purposes. Fiber optic gyroscope (FOG error parameters such as scale factors, biases and misalignment errors are relatively unstable, especially with the environmental disturbances and the aging of fiber coils. These uncalibrated error parameters are the main reasons that the precision of FOG-based strapdown inertial navigation system (SINS degraded. This research is mainly on the application of a novel artificial fish swarm algorithm (NAFSA on FOG error coefficients recalibration/identification. First, the NAFSA avoided the demerits (e.g., lack of using artificial fishes’ pervious experiences, lack of existing balance between exploration and exploitation, and high computational cost of the standard AFSA during the optimization process. To solve these weak points, functional behaviors and the overall procedures of AFSA have been improved with some parameters eliminated and several supplementary parameters added. Second, a hybrid FOG error coefficients recalibration algorithm has been proposed based on NAFSA and Monte Carlo simulation (MCS approaches. This combination leads to maximum utilization of the involved approaches for FOG error coefficients recalibration. After that, the NAFSA is verified with simulation and experiments and its priorities are compared with that of the conventional calibration method and optimal AFSA. Results demonstrate high efficiency of the NAFSA on FOG error coefficients recalibration.

A novel artificial fish swarm algorithm for recalibration of fiber optic gyroscope error parameters.

Science.gov (United States)

Gao, Yanbin; Guan, Lianwu; Wang, Tingjun; Sun, Yunlong

2015-05-05

The artificial fish swarm algorithm (AFSA) is one of the state-of-the-art swarm intelligent techniques, which is widely utilized for optimization purposes. Fiber optic gyroscope (FOG) error parameters such as scale factors, biases and misalignment errors are relatively unstable, especially with the environmental disturbances and the aging of fiber coils. These uncalibrated error parameters are the main reasons that the precision of FOG-based strapdown inertial navigation system (SINS) degraded. This research is mainly on the application of a novel artificial fish swarm algorithm (NAFSA) on FOG error coefficients recalibration/identification. First, the NAFSA avoided the demerits (e.g., lack of using artificial fishes' pervious experiences, lack of existing balance between exploration and exploitation, and high computational cost) of the standard AFSA during the optimization process. To solve these weak points, functional behaviors and the overall procedures of AFSA have been improved with some parameters eliminated and several supplementary parameters added. Second, a hybrid FOG error coefficients recalibration algorithm has been proposed based on NAFSA and Monte Carlo simulation (MCS) approaches. This combination leads to maximum utilization of the involved approaches for FOG error coefficients recalibration. After that, the NAFSA is verified with simulation and experiments and its priorities are compared with that of the conventional calibration method and optimal AFSA. Results demonstrate high efficiency of the NAFSA on FOG error coefficients recalibration.

A comparison between two full-scale MBR and CAS municipal wastewater treatment plants: techno-economic-environmental assessment.

Science.gov (United States)

Bertanza, Giorgio; Canato, Matteo; Laera, Giuseppe; Vaccari, Mentore; Svanström, Magdalena; Heimersson, Sara

2017-07-01

A holistic assessment procedure has been used in this study for comparing conventional activated sludge (CAS) and membrane bioreactor (MBR) processes for the treatment of municipal wastewater. Technical, social, administrative, economic and environmental impacts have been evaluated based on 1 year of operational data from three full-scale lines (one MBR and two CAS) working in parallel in a large municipal treatment plant. The comparative assessment evidences a slight advantage of the conventional process in the studied case, essentially due to lower costs, complexity and energy consumption. On the other hand, the MBR technology has a better social acceptance and similar overall environmental footprint. Although these results are influenced by site-specific parameters and cannot be generalized, the assessment procedure allowed identifying the most important factors affecting the final scores for each technology and the main differences between the compared technologies. Local conditions can affect the relative importance of the assessed impacts, and the use of weighting factors is proposed for better tailoring the comparative assessment to the local needs and circumstances. A sensitivity analysis on the weighted final scores demonstrated how local factors are very important and must be carefully evaluated in the decision making process.

Study of environmental pollution by heavy metals in Sepetiba Bay and Paraiba do Sul River - Guandu River by analysis of critical parameters

International Nuclear Information System (INIS)

Pfeiffer, W.C.; Fiszman, M.; Malm, O.; Lima, N.R.W.; Azcue, J.M.

The heavy metal pollution in Sepetiba Bay and Paraiba do Sul River - Guandu River is studied by analysis of critical parameters. This ones are employed in environmental impact determination of nuclear installations. Three critic metals (Cr, Zn, Cd) and four (Pb, Cu, Zn, Cr) ones are lauched by the industrial park of Sepetiba Bay and Paraiba Vale respectively. (M.A.C.) [pt

Disability adjusted life year (DALY): a useful tool for quantitative assessment of environmental pollution.

Science.gov (United States)

Gao, Tingting; Wang, Xiaochang C; Chen, Rong; Ngo, Huu Hao; Guo, Wenshan

2015-04-01

Disability adjusted life year (DALY) has been widely used since 1990s for evaluating global and/or regional burden of diseases. As many environmental pollutants are hazardous to human health, DALY is also recognized as an indicator to quantify the health impact of environmental pollution related to disease burden. Based on literature reviews, this article aims to give an overview of the applicable methodologies and research directions for using DALY as a tool for quantitative assessment of environmental pollution. With an introduction of the methodological framework of DALY, the requirements on data collection and manipulation for quantifying disease burdens are summarized. Regarding environmental pollutants hazardous to human beings, health effect/risk evaluation is indispensable for transforming pollution data into disease data through exposure and dose-response analyses which need careful selection of models and determination of parameters. Following the methodological discussions, real cases are analyzed with attention paid to chemical pollutants and pathogens usually encountered in environmental pollution. It can be seen from existing studies that DALY is advantageous over conventional environmental impact assessment for quantification and comparison of the risks resulted from environmental pollution. However, further studies are still required to standardize the methods of health effect evaluation regarding varied pollutants under varied circumstances before DALY calculation. Copyright © 2014 Elsevier B.V. All rights reserved.

Life cycle air quality impacts of conventional and alternative light-duty transportation in the United States.

Science.gov (United States)

Tessum, Christopher W; Hill, Jason D; Marshall, Julian D

2014-12-30

Commonly considered strategies for reducing the environmental impact of light-duty transportation include using alternative fuels and improving vehicle fuel economy. We evaluate the air quality-related human health impacts of 10 such options, including the use of liquid biofuels, diesel, and compressed natural gas (CNG) in internal combustion engines; the use of electricity from a range of conventional and renewable sources to power electric vehicles (EVs); and the use of hybrid EV technology. Our approach combines spatially, temporally, and chemically detailed life cycle emission inventories; comprehensive, fine-scale state-of-the-science chemical transport modeling; and exposure, concentration-response, and economic health impact modeling for ozone (O3) and fine particulate matter (PM2.5). We find that powering vehicles with corn ethanol or with coal-based or "grid average" electricity increases monetized environmental health impacts by 80% or more relative to using conventional gasoline. Conversely, EVs powered by low-emitting electricity from natural gas, wind, water, or solar power reduce environmental health impacts by 50% or more. Consideration of potential climate change impacts alongside the human health outcomes described here further reinforces the environmental preferability of EVs powered by low-emitting electricity relative to gasoline vehicles.

Influence of sulphate-reducing bacteria on environmental parameters and marine corrosion behavior of Q235 steel in aerobic conditions

International Nuclear Information System (INIS)

Wan Yi; Zhang Dun; Liu Huaiqun; Li Yongjuan; Hou Baorong

2010-01-01

The growth cycle of sulphate-reducing bacteria (SRB), Desulfovibrio caledoniensis, and the effect of SRB on the environmental parameters and corrosion behavior of Q235 steel during a growth cycle in aerobic (air- and O 2 -saturated culture solutions) and anaerobic (N 2 - saturated culture solutions) conditions were investigated. Oxygen dissolved in the culture solutions induced slow growth and fast decay of SRB. The growth process of SRB under anaerobic and aerobic conditions influenced sulphide anion concentration (C s 2- ), pH, and conductivity (κ). The values of C s 2- and κ under aerobic conditions were lower than those under anaerobic conditions, and the pH values increased from O 2 - to air- to N 2 -saturated culture solutions. Aerobic conditions induced the open circuit potential (E OC ) to shift in the positive direction after the stationary phase of SRB growth. The charge transfer resistance (R ct ) increased quickly during the exponential growth phase, almost maintained stability during the stationary phase, and decreased after the stationary phase in all three conditions, and the impedance magnitude decreased from O 2 - to air- to N 2 -saturated culture solutions. The biofilms induced by SRB were observed by scanning electron microscopy (SEM) under aerobic and anaerobic conditions, and energy dispersive spectroscopy (EDS) was performed in abiotic and SRB-containing systems to distinguish the corrosion products. The reasons for the effects of SRB on the environmental parameters and corrosion behavior of carbon steel are discussed.

Influence of processing parameters on lattice parameters in laser deposited tool alloy steel

Energy Technology Data Exchange (ETDEWEB)

Sun, G.F., E-mail: gfsun82@gmail.com [Center for Laser-Aided Intelligent Manufacturing, University of Michigan, Ann Arbor, MI, 48109 (United States); School of Mechanical Engineering, Jiangsu University, Zhenjiang, Jiangsu, 212013 (China); Bhattacharya, S. [Center for Laser-Aided Intelligent Manufacturing, University of Michigan, Ann Arbor, MI, 48109 (United States); Dinda, G.P.; Dasgupta, A. [Center for Advanced Technologies, Focus: Hope, Detroit, MI, 48238 (United States); Mazumder, J. [Center for Laser-Aided Intelligent Manufacturing, University of Michigan, Ann Arbor, MI, 48109 (United States)

2011-06-15

Highlights: {yields} Orientation relationships among phases in the DMD are given. {yields} Martensite lattice parameters increased with laser specific energy. {yields} Austenite lattice parameters decreased with laser specific energy. - Abstract: Laser aided direct metal deposition (DMD) has been used to form AISI 4340 steel coating on the AISI 4140 steel substrate. The microstructural property of the DMD coating was analyzed by means of scanning electron microscopy, transmission electron microscopy and X-ray diffractometry. Microhardness of the DMD was measured with a Vickers microhardness tester. Results indicate that DMD can be used to form dense AISI 4340 steel coatings on AISI 4140 steel substrate. The DMD coating is mainly composed of martensite and retained austenite. Consecutive thermal cycles have a remarkable effect on the microstructure of the plan view of the DMD coating and on the corresponding microhardness distribution. Orientation relationships among austenite, martensite and cementite in the DMD coating followed the ones in conventional heat treated steels. As the laser specific energy decreased, cooling rate increased, and martensite peaks broadened and shifted to a lower Bragg's angle. Also martensite lattice parameters increased and austenite lattice parameters decreased due to the above parameter change.

Influence of processing parameters on lattice parameters in laser deposited tool alloy steel

International Nuclear Information System (INIS)

Sun, G.F.; Bhattacharya, S.; Dinda, G.P.; Dasgupta, A.; Mazumder, J.

2011-01-01

Highlights: → Orientation relationships among phases in the DMD are given. → Martensite lattice parameters increased with laser specific energy. → Austenite lattice parameters decreased with laser specific energy. - Abstract: Laser aided direct metal deposition (DMD) has been used to form AISI 4340 steel coating on the AISI 4140 steel substrate. The microstructural property of the DMD coating was analyzed by means of scanning electron microscopy, transmission electron microscopy and X-ray diffractometry. Microhardness of the DMD was measured with a Vickers microhardness tester. Results indicate that DMD can be used to form dense AISI 4340 steel coatings on AISI 4140 steel substrate. The DMD coating is mainly composed of martensite and retained austenite. Consecutive thermal cycles have a remarkable effect on the microstructure of the plan view of the DMD coating and on the corresponding microhardness distribution. Orientation relationships among austenite, martensite and cementite in the DMD coating followed the ones in conventional heat treated steels. As the laser specific energy decreased, cooling rate increased, and martensite peaks broadened and shifted to a lower Bragg's angle. Also martensite lattice parameters increased and austenite lattice parameters decreased due to the above parameter change.

Quadratic programming with fuzzy parameters: A membership function approach

International Nuclear Information System (INIS)

Liu, S.-T.

2009-01-01

Quadratic programming has been widely applied to solving real world problems. The conventional quadratic programming model requires the parameters to be known constants. In the real world, however, the parameters are seldom known exactly and have to be estimated. This paper discusses the fuzzy quadratic programming problems where the cost coefficients, constraint coefficients, and right-hand sides are represented by convex fuzzy numbers. Since the parameters in the program are fuzzy numbers, the derived objective value is a fuzzy number as well. Using Zadeh's extension principle, a pair of two-level mathematical programs is formulated to calculate the upper bound and lower bound of the objective values of the fuzzy quadratic program. Based on the duality theorem and by applying the variable transformation technique, the pair of two-level mathematical programs is transformed into a family of conventional one-level quadratic programs. Solving the pair of quadratic programs produces the fuzzy objective values of the problem. An example illustrates method proposed in this paper.

Energy balance in olive oil farms: comparison of organic and conventional farming systems.

Science.gov (United States)

Moreno, Marta M.; Meco, Ramón; Moreno, Carmen

2013-04-01

The viability of an agricultural production system not only depends on the crop yields, but especially on the efficient use of available resources. However, the current agricultural systems depend heavily on non-renewable energy consumption in the form of fertilizers, fossil fuels, pesticides and machinery. In developed countries, the economic profitability of different productive systems is dependent on the granting of subsidies of diverse origin that affect both production factors (or inputs) and the final product (or output). Leaving such external aids, energy balance analysis reveals the real and most efficient form of management for each agroclimatic region, and is also directly related to the economic activity and the environmental state. In this work we compare the energy balance resulting from organic and conventional olive oil farms under the semi-arid conditions of Central Spain. The results indicate that the mean energy supplied to the organic farms was sensitively lower (about 30%) in comparison with the conventional management, and these differences were more pronounced for the biggest farms (> 15 ha). Mean energy outputs were about 20% lower in the organic system, although organic small farms (ratio scarcely reached 25%. Human labor item only represented a very small amount of the total energy input in both cases (less than 1%). As conclusions, both management systems were efficient from an energy point of view. The value of the organic production should be focused on the environmental benefits it provides, which are not usually considered in the conventional management on not valuing the damage it produces to the environment. Organic farming would improve the energy efficiency in these environmental conditions, offering a sustainable production with minimal inputs.

The non conventional gas, a factor of energy independence?

International Nuclear Information System (INIS)

Jacques Percebois

2011-01-01

As the recent exploitation of non conventional gases (or shale gases) has dramatically changed the energy deal in the USA, and therefore the energy world market, these gases seem to be a factor of energy independence for countries which possess such resources, but also create environmental constrains. The author describes how shale gas produces a technological revolution, and discusses how it can be a factor for the diversification of the energy mix, and above all a way to reconquer some energy independence

Multi-parameter full waveform inversion using Poisson

KAUST Repository

Oh, Juwon

2016-07-21

In multi-parameter full waveform inversion (FWI), the success of recovering each parameter is dependent on characteristics of the partial derivative wavefields (or virtual sources), which differ according to parameterisation. Elastic FWIs based on the two conventional parameterisations (one uses Lame constants and density; the other employs P- and S-wave velocities and density) have low resolution of gradients for P-wave velocities (or ). Limitations occur because the virtual sources for P-wave velocity or (one of the Lame constants) are related only to P-P diffracted waves, and generate isotropic explosions, which reduce the spatial resolution of the FWI for these parameters. To increase the spatial resolution, we propose a new parameterisation using P-wave velocity, Poisson\\'s ratio, and density for frequency-domain multi-parameter FWI for isotropic elastic media. By introducing Poisson\\'s ratio instead of S-wave velocity, the virtual source for the P-wave velocity generates P-S and S-S diffracted waves as well as P-P diffracted waves in the partial derivative wavefields for the P-wave velocity. Numerical examples of the cross-triangle-square (CTS) model indicate that the new parameterisation provides highly resolved descent directions for the P-wave velocity. Numerical examples of noise-free and noisy data synthesised for the elastic Marmousi-II model support the fact that the new parameterisation is more robust for noise than the two conventional parameterisations.

A Comparative Study of Reduced-Variables-Based Flash and Conventional Flash

DEFF Research Database (Denmark)

Yan, Wei; Stenby, Erling Halfdan; Michelsen, Michael Locht

2013-01-01

) with zero binary-interaction parameters (BIPs) and later generalized to situations with nonzero-BIP matrices. Most of the studies in the last decade suggest that the reduced-variables methods are much more efficient than the conventional flash method. However, Haugen and Beckner (2011) questioned...... with the conventional minimization-based flash. A test with the use of the SPE 3 example (Kenyon and Behie 1987) showed that the best reduction in time was less than 20% for the extreme situation of 25 components and just one row/column with nonzero BIPs. A better performance can be achieved by a simpler implementation...... directly using the sparsity of the BIP matrix....

Differentiation between early rheumatoid arthritis patients and healthy persons by conventional and dynamic contrast-enhanced magnetic resonance imaging

DEFF Research Database (Denmark)

Axelsen, Mette Bjørndal; Ejbjerg, B J; Hetland, M L

2014-01-01

OBJECTIVES: To identify the magnetic resonance imaging (MRI) parameter that best differentiates healthy persons and patients with early rheumatoid arthritis (RA), and to investigated responsiveness to treatment of various MRI parameters. METHOD: Conventional MRI and dynamic contrast-enhanced (DCE...

Foraging behavior, environmental parameters and nests development of Melipona colimana Ayala (Hymenoptera: Meliponini) in temperate climate of Jalisco, México.

Science.gov (United States)

Macías-Macías, J O; Tapia-Gonzalez, J M; Contreras-Escareño, F

2017-01-01

Melipona colimana Ayala is an endemic species inhabiting temperate forests of pine and oak of south of Jalisco in Mexico. During a year, it was recorded every 15 days foraging activity, environmental parameters and the development of colonies of M. colimana in its wild habitat. For five minutes every hour from 7:00 to 21:00, the bees that entered and left the hive and bringing pollen and resin were registered. Every hour the relative humidity, temperature, wind speed and light intensity was recorded and related to foraging activity. Additionally, the weight of the colonies recently transferred to wooden boxes, the number of brood combs, honey pots and pollen were registered. The time of beginning and ending of the foraging activity differs from the reports of stingless bees of tropical weather and the same happens with the pollen collection. The environmental parameters that affect other tropical stingless bees in the foraging activity also affect M. colimana in temperate climate. It was determined that the major activity season and the presence of more pollen pots in the colony is from November through February, for what it could be the best time of the year for the division and obtainance of new colonies, while the critical period of minor activity and pollen flow was during rainy season. These data may be useful for the future sustainable use of this species in temperate climate.

Environmental assessment of organic soybean (Glycine max.) imported from China to Denmark

DEFF Research Database (Denmark)

Knudsen, Marie Trydeman; Yu-Hui, Qiao; Van, Luo

2010-01-01

Growing global trade with organic products has increased the demand for environmental impact assessments during both production and transport. Environmental hotspots of organic soybeans produced in China and imported to Denmark were identified in a case study using a life cycle assessment approach....... Furthermore, environmental impacts of organic and conventional soybeans at farm gate were compared in the case study. The total global warming potential (GWP) per ton organic soybeans imported to Denmark revealed that 51% came from transportation and 35% from the farm level. Comparing organic and conventional...

The Conventional and Unconventional about Disability Conventions: A Reflective Analysis of United Nations Convention on the Rights of Persons with Disabilities

Science.gov (United States)

Umeasiegbu, Veronica I.; Bishop, Malachy; Mpofu, Elias

2013-01-01

This article presents an analysis of the United Nations Convention on the Rights of Persons with Disabilities (CRPD) in relation to prior United Nations conventions on disability and U.S. disability policy law with a view to identifying the conventional and also the incremental advances of the CRPD. Previous United Nations conventions related to…

Transoral endoscopic surgery versus conventional thoracoscopic surgery for thoracic intervention: safety and efficacy in a canine survival model.

Science.gov (United States)

Liu, Chien-Ying; Chu, Yen; Wu, Yi-Cheng; Yuan, Hsu-Chia; Ko, Po-Jen; Liu, Yun-Hen; Liu, Hui-Ping

2013-07-01

Transoral endoscopic surgery has been shown to be feasible and safe in both humans and animal models. The purpose of this study was to evaluate the safety and efficacy of transoral and conventional thoracoscopy for thoracic exploration, surgical lung biopsy, and pericardial window creation. The animals (n = 20) were randomly assigned to the transoral endoscopic approach group (n = 10) or conventional thoracoscopic approach group (n = 10). Transoral thoracoscopy was performed with a flexible bronchoscope via an incision over the vestibulum oris. In conventional thoracoscopy, access to the thoracic cavity was obtained through a thoracic incision. Surgical outcomes (body weight, operating time, operative complications, and time to resumption of normal diet), physiologic parameters (respiratory rate, body temperature), inflammatory parameters [white blood cell (WBC) counts and C-reactive protein (CRP)], and pulmonary parameters (arterial blood gases) were compared for both procedures. The surgical lung biopsy and pericardial window creation were successfully performed in all animals except one animal in the transoral group. There was no significant difference in operating times between the groups. The increase in WBC in the transoral thoracoscopy group was significantly smaller on postoperative day 1 than in the conventional thoracoscopy group (p = 0.0029). The transoral group had an earlier return to preoperative body temperature (p = 0.041) and respiratory rate (p = 0.045) on day 7. With respect to pulmonary parameters, there was no significant difference in blood pH, pCO2, or PaCO2 between the transoral and transthoracic groups. All animals survived without complications 14 days after surgery. This study demonstrated that the transoral approach was comparable to conventional thoracoscopic surgery for lung biopsy and pericardial window creation in terms of safety and efficacy.

Revision of the Paris Convention and the Brussels Supplementary Convention

International Nuclear Information System (INIS)

Busekist, Otto von.

1977-01-01

The Paris Convention and the Brussels Supplementary Convention have in substance remained unchanged since their adoption in 1960 and 1963, respectively. During that period, nuclear industry and technology have developed considerably while the financial and monetary bases of the Conventions have been shattered. The amounts of liability and compensation have been eroded by inflation, and the gold-based unit of account in which these amounts are expressed has lost its original meaning after the abolition of the official gold price. The question of revising the Conventions, in particular of raising those amounts and of replacing the unit of account, is therefore being studied by the Group of Governmental Experts on Third party Liability in the Field of Nuclear Energy of the OECD Nuclear Energy Agency. (auth.) [fr

The UN Convention on International Watercourses and integrated water management: A bridge built

Science.gov (United States)

Tzatzaki, Vasiliki-Maria

2008-11-01

The UN Convention on the Law of the Non Navigational Uses of International Watercourses incorporates principles regarding the management of international water resources. The most important principles are the duty of the riparian states to cooperate, not to cause significant harm, to protect the aquatic environment and to utilize the watercourses reasonably and equitably. The lack of hierarchy between these principles signifies that the necessary step for the sound management of shared natural resources is an integrated approach, which takes into account economic development, human needs and environmental protection. Moreover, the UN Convention proved to be useful for the International Court of Justice (hereinafter ICJ) in the settlement of the Gabcikovo- Nagymaros dispute between Hungary and Slovakia for the Danube River. The Court highlighted the importance of the Convention by reminding the riparian states of their obligation to abide by its principles. On the other hand, the ICJ has used the principles of the Convention in the pending case of Pulp Mills between Uruguay and Argentina. This paper is going to show that the UN Convention is an international legal framework with general guidelines in order to create regional conventions, which promotes integrated water management as a solution to the emerging challenges of international water law and potential future conflicts.

The UN Convention on International Watercourses and integrated water management: A bridge built

International Nuclear Information System (INIS)

Tzatzaki, Vasiliki-Maria

2008-01-01

The UN Convention on the Law of the Non Navigational Uses of International Watercourses incorporates principles regarding the management of international water resources. The most important principles are the duty of the riparian states to cooperate, not to cause significant harm, to protect the aquatic environment and to utilize the watercourses reasonably and equitably. The lack of hierarchy between these principles signifies that the necessary step for the sound management of shared natural resources is an integrated approach, which takes into account economic development, human needs and environmental protection. Moreover, the UN Convention proved to be useful for the International Court of Justice (hereinafter ICJ) in the settlement of the Gabcikovo- Nagymaros dispute between Hungary and Slovakia for the Danube River. The Court highlighted the importance of the Convention by reminding the riparian states of their obligation to abide by its principles. On the other hand, the ICJ has used the principles of the Convention in the pending case of Pulp Mills between Uruguay and Argentina. This paper is going to show that the UN Convention is an international legal framework with general guidelines in order to create regional conventions, which promotes integrated water management as a solution to the emerging challenges of international water law and potential future conflicts.

Generalised analysis of the potential of an enterprise as a function of environmental parameters (theoretical approach

Directory of Open Access Journals (Sweden)

Karapeychik Igor M.

2013-03-01

Full Text Available Within the frameworks of the author’s concept of the potential of an enterprise as the ability to conduct its immanently appropriate activity and also the idea of presentation of the size of the potential in the form of potential function from parameters of the state of an enterprise and foreign economic environment the article develops a scientific and methodical approach to construction and analysis of the potential function of an enterprise. The offered approach envisages building an economic and mathematical model of an enterprise of the optimisation type with consideration of environmental factors, determination of the size of economic potential as a maximum possible (optimal with the set condition of an enterprise and external environment of net income, statistical test of the model with possible values of external parameters (formation of statistical sampling of the graph of the potential function of an enterprise and application of statistical methods including methods of correlation, factor and regression analysis, for the study of its properties. Operability of this approach is shown on the example of the study of properties of the potential function of a model enterprise. In the course of approbation the article demonstrates its ability to reveal specific features of impact of external factors on economic potential of an enterprise; establishes, as a common regularity, differential influence of various environmental factors, caused not only by the nature of these factors, but also production and economic specific features and specific state of an enterprise. The article shows that the quantitative values of the force of influence of the said factors upon the value of economic potential, obtained during statistical analysis of the potential function of an enterprise, could serve as an instrument of ranking these factors by the priority level in the goal setting tasks at the stage of formation of the strategy of enterprise development

Evaluating the environmental fate of pharmaceuticals using a level III model based on poly-parameter linear free energy relationships

International Nuclear Information System (INIS)

Zukowska, Barbara; Breivik, Knut; Wania, Frank

2006-01-01

We recently proposed how to expand the applicability of multimedia models towards polar organic chemicals by expressing environmental phase partitioning with the help of poly-parameter linear free energy relationships (PP-LFERs). Here we elaborate on this approach by applying it to three pharmaceutical substances. A PP-LFER-based version of a Level III fugacity model calculates overall persistence, concentrations and intermedia fluxes of polar and non-polar organic chemicals between air, water, soil and sediments at steady-state. Illustrative modeling results for the pharmaceuticals within a defined coastal region are presented and discussed. The model results are highly sensitive to the degradation rate in water and the equilibrium partitioning between organic carbon and water, suggesting that an accurate description of this particular partitioning equilibrium is essential in order to obtain reliable predictions of environmental fate. The PP-LFER based modeling approach furthermore illustrates that the greatest mobility in aqueous phases may be experienced by pharmaceuticals that combines a small molecular size with strong H-acceptor properties

Evaluating the environmental fate of pharmaceuticals using a level III model based on poly-parameter linear free energy relationships

Energy Technology Data Exchange (ETDEWEB)

Zukowska, Barbara [Department of Analytical Chemistry, Chemical Faculty, Gdansk University of Technology, 11/12 G. Narutowicza St., 80-952 Gdansk (Poland); Breivik, Knut [NILU- Norwegian Institute for Air Research, P.O. Box 100, NO-2027 Kjeller (Norway)]. E-mail: knut.breivik@nilu.no; Wania, Frank [Department of Physical and Environmental Sciences, University of Toronto at Scarborough, 1265 Military Trail, Scarborough, Ontario, M1C 1A4 (Canada)

2006-04-15

We recently proposed how to expand the applicability of multimedia models towards polar organic chemicals by expressing environmental phase partitioning with the help of poly-parameter linear free energy relationships (PP-LFERs). Here we elaborate on this approach by applying it to three pharmaceutical substances. A PP-LFER-based version of a Level III fugacity model calculates overall persistence, concentrations and intermedia fluxes of polar and non-polar organic chemicals between air, water, soil and sediments at steady-state. Illustrative modeling results for the pharmaceuticals within a defined coastal region are presented and discussed. The model results are highly sensitive to the degradation rate in water and the equilibrium partitioning between organic carbon and water, suggesting that an accurate description of this particular partitioning equilibrium is essential in order to obtain reliable predictions of environmental fate. The PP-LFER based modeling approach furthermore illustrates that the greatest mobility in aqueous phases may be experienced by pharmaceuticals that combines a small molecular size with strong H-acceptor properties.

Development of conventional fatigue database for structure materials of nuclear power plant

International Nuclear Information System (INIS)

Yang Bing

2002-01-01

Management system of the conventional fatigue database for structure materials of nuclear power plant (NPP) is developed. The database included the parameters of design curves, i.e., the stress-life, survival probability-stress-life, strain-life, survival probability-strain-life, stress-strain and survival probability-stress-strain curves, and corresponding information of materials and testing conditions. Two ways, by materials name or by the inter-bounds of material mechanical properties, are constructed to search the database. From the searched information it can be conveniently performed of the conventional fatigue design analysis and reliability assessment of structures

Environmental Management Accounting (EMA: Reflection of Environmental Factors in the Accounting Processes through the Identification of the Environmental Costs Attached to Products, Processes and Services

Directory of Open Access Journals (Sweden)

Cleopatra Sendroiu

2006-10-01

Full Text Available EMA can be defined as the identification, collection, estimation, analysis, internal reporting, and use of materials and energy flow information, environmental cost information, and other cost information for both conventional and environmental decision-making within an organization. Thus EMA incorporates and integrates two of the three building blocks of sustainable development – environment and economics – as they relate to an organization’s internal decision-making. EMA is a relatively new tool in environmental management. Decades ago environmental costs were very low, so it seemed wise to include them in the overhead account for simplicity and convenience. Recently there has been a steep rise in all environmental costs, including energy and water prices as well as liabilities.

Environmental Management Accounting (EMA: Reflection of Environmental Factors in the Accounting Processes through the Identification of the Environmental Costs Attached to Products, Processes and Services

Directory of Open Access Journals (Sweden)

Costantin Roman

2006-12-01

Full Text Available EMA can be defined as the identification, collection, estimation, analysis, internal reporting, and use of materials and energy flow information, environmental cost information, and other cost information for both conventional and environmental decision-making within an organization. Thus EMA incorporates and integrates two of the three building blocks of sustainable development – environment and economics – as they relate to an organization’s internal decision-making. EMA is a relatively new tool in environmental management. Decades ago environmental costs were very low, so it seemed wise to include them in the overhead account for simplicity and convenience. Recently there has been a steep rise in all environmental costs, including energy and water prices as well as liabilities.

Environmental Aspects of Use of Recycled Carbon Fiber Composites in Automotive Applications.

Science.gov (United States)

Meng, Fanran; McKechnie, Jon; Turner, Thomas; Wong, Kok H; Pickering, Stephen J

2017-11-07

The high cost and energy intensity of virgin carbon fiber manufacture provides an opportunity to recover substantial value from carbon fiber reinforced plastic wastes. In this study, we assess the life cycle environmental implications of recovering carbon fiber and producing composite materials as substitutes for conventional and proposed lightweight materials in automotive applications (e.g., steel, aluminum, virgin carbon fiber). Key parameters for the recycled carbon fiber materials, including fiber volume fraction and fiber alignment, are investigated to identify beneficial uses of recycled carbon fiber in the automotive sector. Recycled carbon fiber components can achieve the lowest life cycle environmental impacts of all materials considered, although the actual impact is highly dependent on the design criteria (λ value) of the specific component. Low production impacts associated with recycled carbon fiber components are observed relative to lightweight competitor materials (e.g., aluminum, virgin carbon fiber reinforced plastic). In addition, recycled carbon fiber components have low in-use energy use due to mass reductions and associated reduction in mass-induced fuel consumption. The results demonstrate environmental feasibility of the CFRP recycling materials, supporting the emerging commercialization of CF recycling technologies and identifying significant potential market opportunities in the automotive sector.

Analysis and monitoring of energy security and prediction of indicator values using conventional non-linear mathematical programming

Directory of Open Access Journals (Sweden)

Elena Vital'evna Bykova

2011-09-01

Full Text Available This paper describes the concept of energy security and a system of indicators for its monitoring. The indicator system includes more than 40 parameters that reflect the structure and state of fuel and energy complex sectors (fuel, electricity and heat & power, as well as takes into account economic, environmental and social aspects. A brief description of the structure of the computer system to monitor and analyze energy security is given. The complex contains informational, analytical and calculation modules, provides applications for forecasting and modeling energy scenarios, modeling threats and determining levels of energy security. Its application to predict the values of the indicators and methods developed for it are described. This paper presents a method developed by conventional nonlinear mathematical programming needed to address several problems of energy and, in particular, the prediction problem of the security. An example of its use and implementation of this method in the application, "Prognosis", is also given.

Bill project authorizing the approval of the amendment to the Convention on the physical protection of nuclear materials

International Nuclear Information System (INIS)

Juppe, Alain; Fillon, Francois

2011-01-01

This document deals with the amendment to the Convention on the Physical Protection of Nuclear Materials which has been adopted in July 2005. This amendment notably extended the Convention's scope, objectives, relation with other international instruments and content (regarding cooperation, sanctions, and so on). After the text of this amendment, this document contains the bill project which reports an impact study (estimated economic, financial, environmental, and legal consequences of the amendment implementation), comments the penal and criminal cooperation defined in the Convention. A table indicates the impact of the amendment's articles on the French law

Environmental consequences of hydroelectric development: the role of facility size and type

International Nuclear Information System (INIS)

Gleick, P.H.

1992-01-01

The development of hydroelectric power throughout the world is receiving renewed attention as the economic, political, and environmental costs of conventional energy production rise. There is currently a perception that hydroelectricity has environmental and economic advantages over electricity produced by conventional energy technologies, but there is a paucity of information about the environmental impacts of hydroelectric facilities as a function of size and type. We characterize the environmental impacts of hydroelectric developments and quantify these impacts as a function of the size and type of project. Several unexpected conclusions arise from our analysis. For most hydroelectric facilities, size, as measured by installed capacity, is not necessarily a good indicator or the severity of environmental costs. For impacts such as land flooded and evaporative water lost, smaller facilities cause greater environmental disruptions per unit of energy produced than do larger facilities. (Author)

Identification of lead acid battery parameters using kalman filtering in photovoltaic system

International Nuclear Information System (INIS)

Boutte, Aissa

2006-01-01

The conventional methods of battery identification parameters consist in estimating the state of charge (SOC), and in establishing a command adapted to charge or to discharge the battery, based on electrical model developed with fixed parameters, These methods are inefficient. The causes of this ineffectiveness are different: In the first place model does not adapt itself with the battery (fixed parameters, lack of modulated parameters, a big non-linearity ...).Secondly, the impossibility for the developed algorithms, to adapt itself with the change of the battery's parameters. New models of identification are used by combining the conventional methods with adaptive and dynamic techniques. They already used in other domains where they have proved a good efficiency and a robustness. Taking into consideration the problems mentioned, and trying to resolve them, we have chosen among the various methods of estimation, Kalman filter (KF) known for its efficiency, in the field of tracking parameters. In this work we try tp represent new ideas, to identify battery parameters using KF method and make an experimental analysis of the performance of this method by using Lead Acid Battery, which is a part of a photovoltaic system (PV).(Author)

Awareness of external costs - helps to improve environmental protection. The methodological convention for estimates of environmental externalities: the energy and transport sectors as examples; Externe Kosten kennen - Umwelt besser schuetzen. Die Methodenkonvention zur Schaetzung externer Kosten am Beispiel Energie und Verkehr

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-04-15

Today, environmental policy has to face economic considerations more than in former times. By means of an economic valuation of environmental damage, it is possible to estimate the economic utility of environmental policy measures. This is important because today's environmental policy prevents tomorrow's environmental damage. At present, there is no other field where this fact has become as obvious as in climate policy. All recent publications have provided evidence that climate protection is worthwhile because the costs of climate protection measures are lower than those resulting from inactivity. Economic valuation means to weigh a number of choices and targets against each other. Valuation requires value judgements. How to define a damage event? How to weigh different goods which deserve protection against each other and damage occurring today against that occurring in the future? How to deal with uncertainty with regard to future returns and risks? These are only a few of the problems depending on value judgements that we have to face. This applies in general and not only in economic valuation. The Methodological Convention elaborated by the Federal Environment Agency addresses these problems. It has been the intention of the authors to explain and substantiate their value judgements and the criteria underlying the valuation of environmental damage (as well as that of environmental damage that has been avoided). Thus, the Federal Environment Agency wishes to make a contribution to transparency and consistency of decision-making in environmental policy. The principles of valuation suggested may be used for example to substantiate cost rates for external costs incurred by energy production and transport. The exemplary calculations have demonstrated that the internalization of environmental costs has been achieved in part only. Policy makers may choose different ways to gradually improve this situation. Internalization does not necessarily mean that

Comparison of gas membrane separation cascades using conventional separation cell and two-unit separation cells

International Nuclear Information System (INIS)

Ohno, Masayoshi; Morisue, Tetsuo; Ozaki, Osamu; Miyauchi, Terukatsu.

1978-01-01

The adoption of two-unit separation cells in radioactive rare gas membrane separation equipment enhances the separation factor, but increases the required membrane area and compressive power. An analytical economic evaluation was undertaken to compare the conventional separation cell with the two-unit separation cells, adopting as parameters the number of cascade stages, the membrane area and the operating power requirements. This paper describes the models used for evaluating the separation performance and the economics of cascade embodying these different concepts of separation cell taken up for study, and the results obtained for the individual concepts are mutually compared. It proved that, in respect of the number required of cascade stages, of operating power requirements and of the annual expenditure, better performance could always be expected of the two-unit separation cells as compared with the conventional separation cell, at least in the range of parameters adopted in this study. As regards the minimum membrane area, the conventional separation cell and the series-type separation cell yielded almost the same values, with the parallel-type separation cell falling somewhat behind. (auth.)

Perspectives on Tobacco Product Waste: A Survey of Framework Convention Alliance Members’ Knowledge, Attitudes, and Beliefs

Directory of Open Access Journals (Sweden)

Sanas Javadian

2015-08-01

Full Text Available Cigarette butts (tobacco product waste (TPW are the single most collected item in environmental trash cleanups worldwide. This brief descriptive study used an online survey tool (Survey Monkey to assess knowledge, attitudes, and beliefs among individuals representing the Framework Convention Alliance (FCA about this issue. The FCA has about 350 members, including mainly non-governmental tobacco control advocacy groups that support implementation of the World Health Organization’s (WHO Framework Convention on Tobacco Control (FCTC. Although the response rate (28% was low, respondents represented countries from all six WHO regions. The majority (62% have heard the term TPW, and nearly all (99% considered TPW as an environmental harm. Most (77% indicated that the tobacco industry should be responsible for TPW mitigation, and 72% felt that smokers should also be held responsible. This baseline information may inform future international discussions by the FCTC Conference of the Parties (COP regarding environmental policies that may be addressed within FCTC obligations. Additional research is planned regarding the entire lifecycle of tobacco’s impact on the environment.

Coherent and conventional gravidynamic quantum 1/f noise

Science.gov (United States)

Handel, Peter H.; George, Thomas F.

2008-04-01

Quantum 1/f noise is a fundamental fluctuation of currents, physical cross sections or process rates, caused by infrared coupling of the current carriers to very low frequency (soft) quanta, also known as infraquanta. The latter are soft gravitons in the gravidynamic case with the coupling constant g= pGM2/Nch considered here -- soft photons in the electrodynamic case and soft transversal piezo-phonons in the lattice-dynamical case. Here p=3.14 and F=psi. Quantum 1/f noise is a new aspect of quantum mechanics expressed mainly through the coherent quantum 1/f effect 2g/pf derived here for large systems, and mainly through the conventional quantum 1/f effect for small systems or individual particles. Both effects are present in general, and their effects are superposed in a first approximation with the help of a coherence (weight) parameter s" that will be derived elsewhere for the gravitational case. The spectral density of fractional fluctuations S(dj/j,f) for j=e(hk/2pm)|F|2 is S(F2,f)/ = S(j,f)/2 = [4ps"/(1+s")]GM2/pfNch = 4.4 10E9 M2/(pfNgram2). Here s" = 2N'GM/c2=N'rs, where N' is the number of particles of mass M per unit length of the current, rs their Schwarzschild radius, and s" is our coherence (weight) parameter giving the ratio of coherent to conventional quantum 1/f contributions.

Integrated approach to the understanding of the degradation of an urban river: local perceptions, environmental parameters and geoprocessing.

Science.gov (United States)

Collier, Carolina A; Almeida Neto, Miguel S de; Aretakis, Gabriela M A; Santos, Rangel E; de Oliveira, Tiago H; Mourão, José S; Severi, William; El-Deir, Ana C A

2015-09-15

The use of interdisciplinary approaches such as the proposed report provides a broad understanding of the relationship between people and the environment, revealing reliable aspects not previously considered in the study of this relationship. This study compiled evidence on the environmental degradation of an urbanized river over the past few decades, providing a diagnosis of the consequences of this process for the river, its ichthyofauna, and the local human population. The study was focused on the Beira Rio community on the Capibaribe River in the municipality of São Lourenço da Mata, Pernambuco, Brazil. Data were collected using geoprocessing and ethnobiological approaches, as well as environmental parameters. This research was conducted with the most experienced long-term residents in the local community, through interviews and participatory methodologies to recovering information about the river environment, its ichthyofauna and its environmental services for the last decades. According to the GIS analysis, the study area was subject to an accelerated process of urbanization, with the total urban area increasing from 73 565, 98 m(2) in 1974 to 383 363, 6 m(2) in 2005. The informants perceived the urban growth, especially in the late twentieth century, being this period recognized as the phase of greatest negative changes in the river environment. The perceived decline of fish stocks was indicated by the community as one of the effects of river degradation. According to the interviews, the deterioration of the river affected the ecosystem services and the relationship of the adjacent human community with this ecosystem. The environmental data indicated that the river is suffering eutrophization and has fecal coliform concentrations 160 times higher than the maximum level permitted by Brazilian legislation. The interdisciplinary approach used in this research allowed the understanding of the degradation process of an urban river and some negative effects

Environmental pollution studies

CERN Document Server

Best, Gerry

1999-01-01

This book examines a number of important contemporary environmental issues in an informative and easy-to-read style. The topics covered include sewage treatment, eutrophication, air pollution, acid rain, global warming and pollution from farming. A particularly valuable section of the book describes a range of tests that can be carried out on various environmental parameters. The procedures require relatively simple equipment and they have been pre-tested in a school laboratory. "Environmental Pollution Studies" will be of value to senior school pupils and students at college or university embarking on courses in environmental science.

Chemical Weapons Convention

National Research Council Canada - National Science Library

1997-01-01

On April 29, 1997, the Convention on the Prohibition of the Development, Production, Stockpiling, and Use of Chemical Weapons and on Their Destruction, known as the Chemical Weapons Convention (CWC...

Paris Convention on third party liability in the field of nuclear energy and Brussels Convention Supplementary to the Paris Convention

International Nuclear Information System (INIS)

1989-01-01

This new bilingual (English and French) edition of the 1960 Paris Convention and 1963 Brussels Supplementary Convention incorporates the provisions of the Protocols which amended each of them on two occasions, in 1964 and 1982. The Expose des motifs to the Paris Convention, as revised in 1982 is also included in this pubication. (NEA) [fr

Oil shale, shale oil, shale gas and non-conventional hydrocarbons

Directory of Open Access Journals (Sweden)

Clerici A.

2015-01-01

Full Text Available In recent years there has been a world “revolution” in the field of unconventional hydrocarbon reserves, which goes by the name of “shale gas”, gas contained inside clay sediments micropores. Shale gas finds particular development in the United States, which are now independent of imports and see a price reduction to less than one third of that in Europe. With the high oil prices, in addition to the non-conventional gas also “oil shales” (fine-grained sedimentary rocks that contain a large amount of organic material to be used both to be directly burned or to extract liquid fuels which go under the name of shale oil, extra heavy oils and bitumen are becoming an industrial reality. Both unconventional gas and oil reserves far exceed in the world the conventional oil and gas reserves, subverting the theory of fossil fuels scarcity. Values and location of these new fossil reserves in different countries and their production by comparison with conventional resources are presented. In view of the clear advantages of unconventional fossil resources, the potential environmental risks associated with their extraction and processing are also highlighted.

Life cycle water consumption for shale gas and conventional natural gas.

Science.gov (United States)

Clark, Corrie E; Horner, Robert M; Harto, Christopher B

2013-10-15

Shale gas production represents a large potential source of natural gas for the nation. The scale and rapid growth in shale gas development underscore the need to better understand its environmental implications, including water consumption. This study estimates the water consumed over the life cycle of conventional and shale gas production, accounting for the different stages of production and for flowback water reuse (in the case of shale gas). This study finds that shale gas consumes more water over its life cycle (13-37 L/GJ) than conventional natural gas consumes (9.3-9.6 L/GJ). However, when used as a transportation fuel, shale gas consumes significantly less water than other transportation fuels. When used for electricity generation, the combustion of shale gas adds incrementally to the overall water consumption compared to conventional natural gas. The impact of fuel production, however, is small relative to that of power plant operations. The type of power plant where the natural gas is utilized is far more important than the source of the natural gas.

Environmental status of FR Yugoslavia

International Nuclear Information System (INIS)

Stojanovic, B.

2002-01-01

This paper reviews key characteristics of environmental situation in Yugoslavia before, during and after NATO bombing against this country. Principal environmental problems and their sources are described. The 'quality' of soil, water and air, as well as some other environmental parameters is documented by available data during last decade. An analysis of main environmental issues was made. Short review of key environmental policies, instruments and institutions is also presented. (author)

Environmental Perceptions and Health before and after Relocation to a Green Building.

Science.gov (United States)

MacNaughton, Piers; Spengler, John; Vallarino, Jose; Santanam, Suresh; Satish, Usha; Allen, Joseph

2016-08-01

Green buildings are designed to have low environmental impacts and improved occupant health and well-being. Improvements to the built environment including ventilation, lighting, and materials have resulted in improved indoor environmental quality (IEQ) in green buildings, but the evidence around occupant health is currently centered around environmental perceptions and self-reported health. To investigate the objective impact of green buildings on health, we tracked IEQ, self-reported health, and heart rate in 30 participants from green and conventional buildings for two weeks. 24 participants were then selected to be relocated to the Syracuse Center of Excellence, a LEED platinum building, for six workdays. While they were there, ventilation, CO 2 , and volatile organic compound (VOC) levels were changed on different days to match the IEQ of conventional, green, and green+ (green with increased ventilation) buildings. Participants reported improved air quality, odors, thermal comfort, ergonomics, noise and lighting and fewer health symptoms in green buildings prior to relocation. After relocation, participants consistently reported fewer symptoms during the green building conditions compared to the conventional one, yet symptom counts were more closely associated with environmental perceptions than with measured IEQ. On average, participants had 4.7 times the odds of reporting a lack of air movement, 1.4 more symptoms (p-value = 0.019) and a 2 bpm higher heart rate (p-value green and conventional buildings is driven by both environmental perceptions and physiological pathways.

Foraging behavior, environmental parameters and nests development of Melipona colimana Ayala (Hymenoptera: Meliponini in temperate climate of Jalisco, México

Directory of Open Access Journals (Sweden)

J. O. Macías-Macías

Full Text Available Abstract Melipona colimana Ayala is an endemic species inhabiting temperate forests of pine and oak of south of Jalisco in Mexico. During a year, it was recorded every 15 days foraging activity, environmental parameters and the development of colonies of M. colimana in its wild habitat. For five minutes every hour from 7:00 to 21:00, the bees that entered and left the hive and bringing pollen and resin were registered. Every hour the relative humidity, temperature, wind speed and light intensity was recorded and related to foraging activity. Additionally, the weight of the colonies recently transferred to wooden boxes, the number of brood combs, honey pots and pollen were registered. The time of beginning and ending of the foraging activity differs from the reports of stingless bees of tropical weather and the same happens with the pollen collection. The environmental parameters that affect other tropical stingless bees in the foraging activity also affect M. colimana in temperate climate. It was determined that the major activity season and the presence of more pollen pots in the colony is from November through February, for what it could be the best time of the year for the division and obtainance of new colonies, while the critical period of minor activity and pollen flow was during rainy season. These data may be useful for the future sustainable use of this species in temperate climate.

Genetic parameters and environmental effects on temperament score and reproductive traits of Nellore cattle.

Science.gov (United States)

Barrozo, D; Buzanskas, M E; Oliveira, J A; Munari, D P; Neves, H H R; Queiroz, S A

2012-01-01

Animal temperament is a trait of economic relevance and its use as a selection criterion requires the identification of environmental factors that influence this trait, as well as the estimation of its genetic variability and interrelationship with other traits. The objectives of this study were to evaluate the effect of the covariates dam age at calving (ADC), long yearling age (YA) and long yearling weight (YW) on temperament score (T) and to estimate genetic parameters for T, scrotal circumference (SC) at long YA and age at first calving (AFC) in Nellore cattle participating in a selection program. The traits were analyzed by the restricted maximum likelihood method under a multiple-trait animal model. For all traits, contemporary group was included as a fixed effect and additive genetic and residual as random effects. In addition to these effects, YA, YW and ADC were considered for analyzing T. In the case of SC and AFC, the effect of long YW was included as a covariate. Genetic parameters were estimated for and between traits. The three covariates significantly influenced T. The heritability estimates for T, SC and AFC were 0.18 ± 0.02, 0.53 ± 0.04 and 0.23 ± 0.08, respectively. The genetic correlations between T and SC, and T and AFC were -0.07 ± 0.17 and -0.06 ± 0.19, respectively. The genetic correlation estimated between SC and AFC was -0.57 ± 0.16. In conclusion, a response to selection for T, SC and AFC is expected and selection for T does not imply correlated responses with the other traits.

Comparative analysis of the use of biomass with conventional generation technologies by applying eco-efficiency; Analise comparativa da utilizacao da biomassa com tecnologias convencionais de geracao aplicando eficiencia ecologica

Energy Technology Data Exchange (ETDEWEB)

Lora, Electo Eduardo Silva [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)], e-mail: electo@unifei.eu.br; Salomon, Karina Ribeiro [Universidade Federal de Itajuba (UNIFEI), MG (Brazil). Nucleo de Estudos em Sistemas Termicos], e-mail: karinas@unifei.edu.br

2004-07-01

The world's concern regarding the reduction atmospheric emissions, due to the global warming, it is a subject that is being quite discussed. A parameter that evaluates the environmental impact considering the emissions of CO{sub 2}, SO{sub x}, NO{sub x} and PM in an integral way and comparing to the international air quality standards that are in force is called ecological efficiency ({epsilon}). This paper intends to compare environmental impacts of the atmospheric pollution due to technologies that use the biomass as fuel with conventional and advanced technologies of electricity generation. It is also evaluated the advantages of the use of the cogeneration starting from the biomass. The most important results that were obtained are comparative graphs confirming that the use of the biomass as energy source is a good option from the ecological point of view, when pollution control methods are used. (author)

Root Parameters Show How Management Alters Resource Distribution and Soil Quality in Conventional and Low-Input Cropping Systems in Central Iowa.

Directory of Open Access Journals (Sweden)

Patricia A Lazicki

Full Text Available Plant-soil relations may explain why low-external input (LEI diversified cropping systems are more efficient than their conventional counterparts. This work sought to identify links between management practices, soil quality changes, and root responses in a long-term cropping systems experiment in Iowa where grain yields of 3-year and 4-year LEI rotations have matched or exceeded yield achieved by a 2-year maize (Zea mays L. and soybean (Glycine max L. rotation. The 2-year system was conventionally managed and chisel-ploughed, whereas the 3-year and 4-year systems received plant residues and animal manures and were periodically moldboard ploughed. We expected changes in soil quality to be driven by organic matter inputs, and root growth to reflect spatial and temporal fluctuations in soil quality resulting from those additions. We constructed a carbon budget and measured soil quality indicators (SQIs and rooting characteristics using samples taken from two depths of all crop-phases of each rotation system on multiple dates. Stocks of particulate organic matter carbon (POM-C and potentially mineralizable nitrogen (PMN were greater and more evenly distributed in the LEI than conventional systems. Organic C inputs, which were 58% and 36% greater in the 3-year rotation than in the 4-year and 2-year rotations, respectively, did not account for differences in SQI abundance or distribution. Surprisingly, SQIs did not vary with crop-phase or date. All biochemical SQIs were more stratified (p<0.001 in the conventionally-managed soils. While POM-C and PMN in the top 10 cm were similar in all three systems, stocks in the 10-20 cm depth of the conventional system were less than half the size of those found in the LEI systems. This distribution was mirrored by maize root length density, which was also concentrated in the top 10 cm of the conventionally managed plots and evenly distributed between depths in the LEI systems. The plow-down of organic amendments

Relating Magnetic Parameters to Heavy Metal Concentrations and Environmental Factors at Formosa Mine Superfund Site, Douglas County, OR

Science.gov (United States)

Upton, T. L.

2016-12-01

Advances in the field of environmental magnetism have led to exciting new applications for this field. Magnetic minerals are ubiquitous in the environment and tend to have an affinity for heavy metals. Hence, it has been demonstrated that magnetic properties are often significantly related to concentrations of heavy metals and other pollutants. As a result, magnetic techniques have been used as proxy for determining hot spots of several types of pollution produced from a diversity of anthropogenic sources. Magnetic measurements are non-destructive and relatively inexpensive compared to geochemical analyses. The utility of environmental magnetic methods varies widely depending on biological, chemical and physical processes that create and transform soils and sediments. Applications in the direction of mapping heavy metals have been studied and shown to be quite useful in countries such as China and India but to date, little research has been done in the US. As such, there is need to expand the scope of research to a wider range of soil types and land uses, especially within the US. This study investigates the application of environmental magnetic techniques to mapping of heavy metal concentrations at the Formosa Mine Superfund Site, an abandoned mine about 25 miles southwest of Roseburg, OR. The soils and sediment at this site are derived from pyrite-rich bedrock which is weak in terms of magnetic susceptibility. Using hotspot analysis, correlation and cluster analyses, interactions between metals and magnetic parameters are investigated in relation to environmental factors such as proximity to seeps and adits. Preliminary results suggest significant correlation of magnetic susceptibility with certain heavy metals, signifying that magnetic methods may be useful in mapping heavy metal hotspots at this site. Further analysis examines the relation of various land use differences in magnetic signatures obtained throughout the Cow Creek watershed.

Meniscal tears: comparison of half-Fourier technique and conventional MR imaging

International Nuclear Information System (INIS)

Shabana, Wael; Maeseneer, Michel de; Machiels, Freddy; Ridder, Filip de; Osteaux, Michel

2003-01-01

Purpose: To determine whether half-Fourier MR image acquisition technique can provide similar information to that of conventional MR acquisition technique for evaluation of meniscal tears. Materials and methods: We studied 101 menisci in 52 patients who were referred for evaluation of meniscal tears. Sagittal MR images of the knee were obtained for all patients by using proton density and T2-weighted SE sequences on a 1-T clinical system. The half-Fourier technique and conventional technique were used for all patients. All other imaging parameters were identical for both sequences (TR/TE=2400/20,70; 3 mm slice thickness; 200x256 matrix; field of view, 200; one signal acquired). Both sets of images were filmed with standard window and level settings. Images were randomised and interpreted independently by two radiologists for the presence of meniscal tears. Images were also subjectively assessed for image quality using a five-point grading scale. Results: On half-Fourier images, Reader 1 interpreted 23 menisci as torn, compared to 28 for Reader 2. On conventional images, Reader 1 interpreted 24 menisci as torn, compared to 26 for Reader 2. Agreement between interpretation of the conventional and that of the half-Fourier images was 99% for Reader 1, and 98% for Reader 2. Agreement between readers for the half-Fourier images was 95%, and for the conventional images 96%. No statistically significant difference was found in the subjective evaluation of image quality between the conventional and half-Fourier images. Conclusion: The half-Fourier acquisition technique compares favourably with the conventional technique for the evaluation of meniscal tears

Environmental Life Cycle Assessment of long-term organic rice production in a Subtropical area of China

DEFF Research Database (Denmark)

Xueqing, He; Qiao, Yuhui; Liang, Long

2018-01-01

a considerable environmental impact and changing from conventional to organic rice cultivation might therefore have a potentially great impact. Meanwhile, it takes time for the organic farming systems to reach a new steady state after conversion to organic. Thus, the environmental profile of the organic products...... will change over time and it is therefore important to examine whether the difference to conventional will be reduced (and disappear) or be increased over time. The aim of the present study was therefore to assess the environmental impact of organic rice production 5 (OR5), 10 (OR10) and 15 (OR15) years since...... conversion and compare it to conventional rice (CR) in subtropical China. The life cycle assessment (LCA) method was used to assess environmental impact of rice production systems with regard to nine environmental impact categories: Non-renewable Energy Depletion (NED), Water Depletion (WD), Land Occupation...

Analyze image quality and comparative study between conventional and computed radiography applied to the inspection of alloys

International Nuclear Information System (INIS)

Machado, Alessandra S.; Oliveira, Davi F.; Silva, Aline S.S.; Nascimento, Joseilson R.; Lopes, Ricardo T.

2011-01-01

Piping system design takes into account relevant factors such as: internal coating, dimensioning, vibration system, adequate supports and principally, piping material. Cost is a decisive factor in the phase of material selection. The non-destructive testing method most commonly employed in industry to analyze the structure of an object is radiographic testing. Computed radiography (CR) is a quicker and much more efficient alternative to conventional radiography but, although CR presents numerous advantages, testing procedures are still largely based on trial and error, due to the lack of a consecrated methodology to choose parameters as it exists for conventional radiography. Notwithstanding, this paper presents a study that uses the technique of computed radiography to analyze metal alloys. These metal alloys are used as internal pipe coating aiming to protect against corrosion and cracks. This study seeks to evaluate parameters such as basic spatial resolution, Normalized Signal-to-Noise Ratio (SNRN), contrast, intensity and also to compare conventional radiography with CR. (author)

Comparison of Miniaturized and Conventional Asymmetrical Flow Field-Flow Fractionation (AF4 Channels for Nanoparticle Separations

Directory of Open Access Journals (Sweden)

Zengchao You

2017-03-01

Full Text Available The performance of a miniaturized channel for the separation of polymer and metal nanoparticles (NP using Asymmetrical Flow Field-Flow Fractionation (AF4 was investigated and compared with a conventional AF4 system. To develop standard separation methods, experimental parameters like cross flow, gradient profile and injection time were varied and optimized. Corresponding chromatographic parameters were calculated and compared. Our results indicate that the chromatographic resolution in the miniaturized channel is lower, whereas significantly shorter analyses time and less solvent consumption were obtained. Moreover, the limit of detection (LOD and limit of quantification (LOQ obtained from hyphenation with a UV-detector are obviously lower than in a conventional channel, which makes the miniaturized channel interesting for trace analysis.

Assessment of environmental external effects in the production of energy

DEFF Research Database (Denmark)

Schleisner, L.; Meyer, H.J.; Morthorst, P.E.

1995-01-01

A project in Denmark has been carried out with the purpose to assess the environmental damages and the external costs in the production of energy. The energy production technologies that will be reported in this paper are wind power and a conventional coal fired plant. In the project the environm......A project in Denmark has been carried out with the purpose to assess the environmental damages and the external costs in the production of energy. The energy production technologies that will be reported in this paper are wind power and a conventional coal fired plant. In the project...... the environmental damages for the energy production technologies are compared, and externalities in the production of energy using renewable energy and fossil fuels are identified, estimated and monetized....

PROCEEDINGS OF THE INTERNATIONAL WORKSHOP ON UNCERTAINTY, SENSITIVITY, AND PARAMETER ESTIMATION FOR MULTIMEDIA ENVIRONMENTAL MODELING. EPA/600/R-04/117, NUREG/CP-0187, ERDC SR-04-2.

Science.gov (United States)

An International Workshop on Uncertainty, Sensitivity, and Parameter Estimation for Multimedia Environmental Modeling was held August 1921, 2003, at the U.S. Nuclear Regulatory Commission Headquarters in Rockville, Maryland, USA. The workshop was organized and convened by the Fe...

Influence of simulation assumptions and input parameters on energy balance calculations of residential buildings

International Nuclear Information System (INIS)

Dodoo, Ambrose; Tettey, Uniben Yao Ayikoe; Gustavsson, Leif

2017-01-01

In this study, we modelled the influence of different simulation assumptions on energy balances of two variants of a residential building, comprising the building in its existing state and with energy-efficient improvements. We explored how selected parameter combinations and variations affect the energy balances of the building configurations. The selected parameters encompass outdoor microclimate, building thermal envelope and household electrical equipment including technical installations. Our modelling takes into account hourly as well as seasonal profiles of different internal heat gains. The results suggest that the impact of parameter interactions on calculated space heating of buildings is somewhat small and relatively more noticeable for an energy-efficient building in contrast to a conventional building. We find that the influence of parameters combinations is more apparent as more individual parameters are varied. The simulations show that a building's calculated space heating demand is significantly influenced by how heat gains from electrical equipment are modelled. For the analyzed building versions, calculated final energy for space heating differs by 9–14 kWh/m"2 depending on the assumed energy efficiency level for electrical equipment. The influence of electrical equipment on calculated final space heating is proportionally more significant for an energy-efficient building compared to a conventional building. This study shows the influence of different simulation assumptions and parameter combinations when varied simultaneously. - Highlights: • Energy balances are modelled for conventional and efficient variants of a building. • Influence of assumptions and parameter combinations and variations are explored. • Parameter interactions influence is apparent as more single parameters are varied. • Calculated space heating demand is notably affected by how heat gains are modelled.

The Hague Judgments Convention

DEFF Research Database (Denmark)

Nielsen, Peter Arnt

2011-01-01

The Hague Judgments Convention of 2005 is the first global convention on international jurisdiction and recognition and enforcement of judgments in civil and commercial matters. The author explains the political and legal background of the Convention, its content and certain crucial issues during...

Determination of parameters for successful spray coating of silicon microneedle arrays.

Science.gov (United States)

McGrath, Marie G; Vrdoljak, Anto; O'Mahony, Conor; Oliveira, Jorge C; Moore, Anne C; Crean, Abina M

2011-08-30

Coated microneedle patches have demonstrated potential for effective, minimally invasive, drug and vaccine delivery. To facilitate cost-effective, industrial-scale production of coated microneedle patches, a continuous coating method which utilises conventional pharmaceutical processes is an attractive prospect. Here, the potential of spray-coating silicon microneedle patches using a conventional film-coating process was evaluated and the key process parameters which impact on coating coalescence and weight were identified by employing a fractional factorial design to coat flat silicon patches. Processing parameters analysed included concentration of coating material, liquid input rate, duration of spraying, atomisation air pressure, gun-to-surface distance and air cap setting. Two film-coating materials were investigated; hydroxypropylmethylcellulose (HPMC) and carboxymethylcellulose (CMC). HPMC readily formed a film-coat on silicon when suitable spray coating parameter settings were determined. CMC films required the inclusion of a surfactant (1%, w/w Tween 80) to facilitate coalescence of the sprayed droplets on the silicon surface. Spray coating parameters identified by experimental design, successfully coated 280μm silicon microneedle arrays, producing an intact film-coat, which follows the contours of the microneedle array without occlusion of the microneedle shape. This study demonstrates a novel method of coating microneedle arrays with biocompatible polymers using a conventional film-coating process. It is the first study to indicate the thickness and roughness of coatings applied to microneedle arrays. The study also highlights the importance of identifying suitable processing parameters when film coating substrates of micron dimensions. The ability of a fractional factorial design to identify these critical parameters is also demonstrated. The polymer coatings applied in this study can potentially be drug loaded for intradermal drug and vaccine delivery

Multi-criteria assessment of energy conversion systems by means of thermodynamic, economic and environmental parameters

Science.gov (United States)

Becerra Lopez, Humberto Ruben

2007-12-01

High expansion of power demand is expected in the Upper Rio Grande region (El Paso, Hudspeth, Culberson, Jeff Davis, Presidio and Brewster counties) as a result of both electrical demand growth and decommissioning of installed capacity. On the supply side a notable deployment of renewable power technologies can be projected owing to the recent introduction of a new energy policy in Texas, which attempts to reach 10,000 installed-MWe of renewable capacity for 2025. Power generation fueled by natural-gas might consistently expand due to the encouraged use of this fuel. In this context the array of participating technologies can be optimized, which, within a sustainability framework, translates into a multidimensional problem. The solution to the problem is presented through this dissertation in two main parts. The first part solves the thermodynamic-environmental problem through developing a dynamic model to project maximum allowable expansion of technologies. Predetermined alternatives include diverse renewable energy technologies (wind turbine, photovoltaic conversion, hybrid solar thermal parabolic trough, and solid oxide fuel cells), a conventional fossil-fuel technology (natural gas combined-cycle), and a breakthrough fossil-fuel technology (solid oxide fuel cells). The analysis is based on the concept of cumulative exergy consumption, expanded to include abatement of emissions. A Gompertz sigmoid growth is assumed and constrained by both exergetic self-sustenance and regional energy resource availability. This part of the analysis assumes that power demand expansion is met by full deployment of alternative technologies backed up by conventional technology. Results show that through a proper allowance for exergy reinvestment the power demand expansion may be met largely by alternative technologies minimizing the primary resource depletion. The second part of the study makes use of the dynamic model to support a multi-objective optimization routine, where the

Fuzzy distributions in probabilistic environmental impact assessment: application to a high-level waste repository

International Nuclear Information System (INIS)

Datta, D.; Joshi, M.L.

2006-01-01

Environmental modeling with a satisfaction levels of the end user in relation to a defined parameter coupled with imprecision that stems from the field data is a key issue. In the context of this issue success of possibility theory based on fuzzy sets has high visibility in comparison with conventional probability theory. Environmental impact assessments of a high level waste repository is focused using the new approach because the problems under consideration includes a number of qualitative uncertainties at different levels, apart from being quite complex; decision-maker's need to have a transparent assessment result that will enable him to understand underlying assumptions and to judge resulting doses. Fuzzy distributions have been tried to resolve the issues related to the safety of environment from the waste repository. Paper describes the details of fuzzy distribution, fuzzy logic and its possible application to deal the qualitative and quantitative uncertainty in connection with waste repository. (author)

Database of Physiological Parameters for Early Life Rats and Mice

Data.gov (United States)

U.S. Environmental Protection Agency — The Database of Physiological Parameters for Early Life Rats and Mice provides information based on scientific literature about physiological parameters. Modelers...

Determination of Critical Parameters of Carbon Dioxide+ Butyraldehyde System with Different Compositions

Institute of Scientific and Technical Information of China (English)

ZHANG Jing-chang; GAO Xi-xin; CAO Wei-liang

2005-01-01

Supercritical carbon dioxide( SC-CO2 ) is considered in green chemistry as a substitute for conventional solvents in chemical reactions due to its environmentally benign character. Recently we have reported the homogeneous hydroformylation of propylene in supercritical carbon dioxide( SC-CO2 ), which is an example of this kind of application of carbon dioxide. The determination for the critical parameters of carbon dioxide + butyraldehyde mixtures is necessary for this reaction design which is the focus of the present paper. The critical parameters of the binary systems were determined via the static visual method at a constant volume with the molar fraction of butyraldehyde ranging from 1.0%to 2. 2% and the pressure ranging from 5 to 10 MPa. The experimental results show that the critical pressure and temperature increased with increasing the molar fraction of butyraldehyde. The bubble(dew) temperatures and the bubble (dew) pressures for the binary systems were also determined experimentally. The p-T Figures at different compositions of the binary systems were described. In addition, the critical compressibility factors Zc of the binary systems at different concentrations of n-butyraldehyde were calculated. It was found that the critical compressibility factor values of the binary systems decreased with increasing the molar fraction of n-butyraldehyde in the experimental range.

The Implementation of Environmental Education in Geography ...

African Journals Online (AJOL)

world of rapid change since environmental challenges are dynamic. ... out in secondary schools in the Caprivi region in Namibia (currently ... a number of international agreements concerning the environment, such as the Convention.

Environmental confounding in gene-environment interaction studies.

Science.gov (United States)

Vanderweele, Tyler J; Ko, Yi-An; Mukherjee, Bhramar

2013-07-01

We show that, in the presence of uncontrolled environmental confounding, joint tests for the presence of a main genetic effect and gene-environment interaction will be biased if the genetic and environmental factors are correlated, even if there is no effect of either the genetic factor or the environmental factor on the disease. When environmental confounding is ignored, such tests will in fact reject the joint null of no genetic effect with a probability that tends to 1 as the sample size increases. This problem with the joint test vanishes under gene-environment independence, but it still persists if estimating the gene-environment interaction parameter itself is of interest. Uncontrolled environmental confounding will bias estimates of gene-environment interaction parameters even under gene-environment independence, but it will not do so if the unmeasured confounding variable itself does not interact with the genetic factor. Under gene-environment independence, if the interaction parameter without controlling for the environmental confounder is nonzero, then there is gene-environment interaction either between the genetic factor and the environmental factor of interest or between the genetic factor and the unmeasured environmental confounder. We evaluate several recently proposed joint tests in a simulation study and discuss the implications of these results for the conduct of gene-environment interaction studies.

Carbon exergy tax (CET): its impact on conventional energy system design and its contribution to advanced systems utilisation

International Nuclear Information System (INIS)

Massardo, A.F.; Santarelli, M.; Borchiellini, R.

2003-01-01

A proposed analytical procedure for a charge on CO 2 emissions is used to determine its impact on the design process of different conventional energy systems. The charge on CO 2 emissions is defined as a Carbon Exergy Tax (CET). The CET utilises the concept of Efficiency Penalty of the energy system coupled with the Index of CO 2 Emissions, which connects the amount of the CO 2 emitted by the plant with the Second Law efficiency of the plant itself. The aim is to reward the efficient use of energy resources, both from a resource and environmental standpoint, and to penalise plants inefficient in this respect. The CET and the conventional Carbon Tax (CT, based on energy policy considerations and imposed on the mass of emitted CO 2 ) are applied to different conventional energy systems (a gas turbine simple cycle; a regenerative cogeneration gas turbine; a three pressure levels combined cycle) in order to determine their impact on the design of the plants. The effects of the CET and CT are investigated for different scenarios (pressure ratio, fuel cost, etc.). The results are presented using useful representations: the cost of electricity vs. efficiency, the cost of electricity vs. specific work, and the cost of electricity vs. plant design parameters (e.g., pressure ratio). Finally, ways that the use of the CET can contribute to the widespread utilization of advanced energy systems, which are more efficient and less polluting, is discussed. In particular, the CET and CT influence is presented and discussed for a solid oxide fuel cell (SOFC) and gas turbine combined cycle

Comparison between conventional and ultrasonic preparation of beef tallow biodiesel

Energy Technology Data Exchange (ETDEWEB)

Teixeira, Leonardo S.G. [Instituto de Quimica - Universidade Federal da Bahia, Campus Universitario de Ondina, 40.170-280 - Salvador, Bahia (Brazil); Assis, Julio C.R.; Santos, Iran T.V.; Guimaraes, Paulo R.B.; Pontes, Luiz A.M. [Universidade Salvador - UNIFACS - Departamento de Engenharia e Arquitetura, - Av. Cardeal da Silva 132, 40.220-141 - Salvador, Bahia (Brazil); Mendonca, Daniel R. [Escola Politecnica - Universidade Federal da Bahia, Av. Aristides Novis 2, 40.210-630, Salvador, Bahia (Brazil); Teixeira, Josanaide S.R. [Instituto Federal de Educacao Ciencia e Tecnologica da Bahia - IFBAHIA - Rua Emidio de Morais S/N, 40.625-650, Salvador - BA (Brazil)

2009-09-15

Tallow is biodiesel feedstock that, due to its highly centralized generation in slaughter/processing facilities and historically low prices, may have energetic, environmental, and economic advantages that could be exploited. Transesterification of fatty acids by means of ultrasonic energy has been used for biodiesel production from different vegetable oils. However, application of ultrasonic irradiation for biodiesel production from beef tallow has received little attention. In this work, the transesterification of beef tallow with methanol was performed in the presence of potassium hydroxide as a catalyst using ultrasound irradiation (400 W, 24 kHz). The reaction time, conversion and biodiesel quality were compared with that seen in conventional transesterification. The results indicated that the reaction conversion and biodiesel quality were similar; however, the use of ultrasonic irradiation decreased the reaction time, showing that this method may be a promising alternative to the conventional method. (author)

Comparison between conventional and ultrasonic preparation of beef tallow biodiesel

International Nuclear Information System (INIS)

Teixeira, Leonardo S.G.; Assis, Julio C.R.; Santos, Iran T.V.; Guimaraes, Paulo R.B.; Pontes, Luiz A.M.; Mendonca, Daniel R.; Teixeira, Josanaide S.R.

2009-01-01

Tallow is biodiesel feedstock that, due to its highly centralized generation in slaughter/processing facilities and historically low prices, may have energetic, environmental, and economic advantages that could be exploited. Transesterification of fatty acids by means of ultrasonic energy has been used for biodiesel production from different vegetable oils. However, application of ultrasonic irradiation for biodiesel production from beef tallow has received little attention. In this work, the transesterification of beef tallow with methanol was performed in the presence of potassium hydroxide as a catalyst using ultrasound irradiation (400 W, 24 kHz). The reaction time, conversion and biodiesel quality were compared with that seen in conventional transesterification. The results indicated that the reaction conversion and biodiesel quality were similar; however, the use of ultrasonic irradiation decreased the reaction time, showing that this method may be a promising alternative to the conventional method. (author)

Technical and Economic Comparison of Conventional Wastewater Treatment Systems in the Sugar Industries in Iran

Directory of Open Access Journals (Sweden)

Mehdi Ahmadi

2005-03-01

Full Text Available Iran’s location in an arid and water scarce area characterized by qualititative and quantitative degradation in its water resources makes strict planning imperative for reduced water consumption and wastewater treatment and reuse, especially in the industry sector. The technical and economic evaluation of various industrial treatment processes is a key factor in the success of such schemes in the face of the effects of climate variety, high wastewater treatment costs, and environmental factors on selecting a most suitable alternative for industrial wastewater treatment. The situation is even more critical in the case of the sugar industry as the largest pollutant source and especially because more than 90% of its facilities are located on plains with a negative water balance. Reviewing wastewater problems associated with the Iranian sugar facilities, this paper will attempt to perform an economic assessment and a comparison of conventional anaerobic-aerobic processes under various conditions in order to identify the best aleternative and to determine the most important environmental and cost factors affecting the selection of a desirable alternative. For this purpose, six combined treatment systems are selected and their construction and operation costs and detailed uniform annual cost sensitivity analysis based on the most important parameters are presented. Finally, two different combined wastewater treatment systems of UASB + facultative lagoons and UASB + trickling filters will be introduced as the best treatment processes for Iranian conditions.

Discussion of parameters associated with the determination of arsenic by electrothermal atomic absorption spectrometry in slurried environmental samples.

Science.gov (United States)

Vassileva, E; Baeten, H; Hoenig, M

2001-01-02

A slurry sampling-fast program procedure has been developed for the determination of arsenic in plants, soils and sediments by electrothermal atomic absorption spectrometry. Efficiencies of various single and mixed modifiers for thermal stabilization of arsenic and for a better removal of the matrix during pyrolysis step were compared. The influence of the slurry concentration, amounts of modifier and parameters of the pyrolysis step on the As integrated absorbance signals have been studied and a comparison between fast and conventional furnace programs was also made. The ultrasonic agitation of the slurry followed by a fast electrothermal program using an Ir/Mg modifier provides the most consistent performance in terms of precision and accuracy. The reliability of the whole procedure has been compared with results obtained after application of a wet digestion method with an HF step and validated by analyzing eleven certified reference materials. Arsenic detection and quantitation limits expressed on dry sample matter were about 30 and 100 micrograms kg-1, respectively.

Environmental Monitoring of Microbe Metabolic Transformation

Science.gov (United States)

Bebout, Brad (Inventor); Fleming, Erich (Inventor); Piccini, Matthew (Inventor); Beasley, Christopher (Inventor); Bebout, Leslie (Inventor)

2013-01-01

Mobile system and method for monitoring environmental parameters involved in growth or metabolic transformation of algae in a liquid. Each of one or more mobile apparati, suspended or partly or wholly submerged in the liquid, includes at least first and second environmental sensors that sense and transmit distinct first and second environmental, growth or transformation parameter values, such as liquid temperature, temperature of gas adjacent to and above the exposed surface, liquid pH, liquid salinity, liquid turbidity, O.sub.2 dissolved in the liquid, CO.sub.2 contained in the liquid, oxidization and reduction potential of the liquid, nutrient concentrations in the liquid, nitrate concentration in the liquid, ammonium concentration in the liquid, bicarbonate concentration in the liquid, phosphate concentration in the liquid, light intensity at the liquid surface, electrical conductivity of the liquid, and a parameter.alpha.(alga) associated with growth stage of the alga, using PAM fluorometry or other suitable parameter measurements.

Environmental impacts associated with Project Rio Blanco

International Nuclear Information System (INIS)

Alldredge, A.W.; Whicker, F.W.; Hanson, W.C.

Project Rio Blanco, an experiment involving deep underground detonation of three 30-kton nuclear explosives designed to stimulate natural gas flow in geologic formations of low permeability, was conducted in western Colorado on 17 May 1973. Environmental impacts associated with this experiment were divided into three categories: radiation, ground motion, and conventional physical activities. Radiation and ground motion are unique to this type experiment while conventional activities would be associated with any type of resource development. The objective of observations made at Rio Blanco was to qualitatively and, where possible, quantitatively ascertain environmental impacts associated with the project. Observations indicated that ground motion and conventional activities appeared to cause the greatest impacts. Ground motion impacts were most severe within 2.4 km of the emplacement well (EW) and were predominantly associated with steep ravine and stream banks and rocky cliffs. Following the detonation, flow and turbidity had increased in a small stream adjacent to the EW. Animals receiving deleterious impacts were those associated with stream banks, cliffs and burrows. No mortality or injury was observed in any large animals. (U.S.)

Potential synergies between existing multilateral environmental agreements in the implementation of land use, land-use change and forestry activities

International Nuclear Information System (INIS)

Cowie, Annette; Schneider, Uwe A.; Montanarella, Luca

2007-01-01

There is potential for synergy between the global environmental conventions on climate change, biodiversity and desertification: changes in land management and land use undertaken to reduce net greenhouse gas emissions can simultaneously deliver positive outcomes for conservation of biodiversity, and mitigation of desertification and land degradation. However, while there can be complementarities between the three environmental goals, there are often tradeoffs. Thus, the challenge lies in developing land use policies that promote optimal environmental outcomes, and in implementing these locally to promote sustainable development. The paper considers synergies and tradeoffs in implementing land use measures to address the objectives of the three global environmental conventions, both from an environmental and economic perspective. The intention is to provide environmental scientists and policy makers with a broad overview of these considerations, and the benefits of addressing the conventions simultaneously

Digital vs conventional radiography: cost and revenue analysis

International Nuclear Information System (INIS)

Dalla Palma, L.; Cuttin, R.; Rimondini, A.; Grisi, G.

1999-01-01

The objective of this study was to analyse and compare the operating and investment costs of two radiographic systems, a conventional and a digital one, and to evaluate the cost/revenue ratio of the two systems. The radiological activity over 1 year for chest and skeletal exams was evaluated: 13,401 chest and 7,124 skeletal exams were considered. The following parameters of variable costs were evaluated: the difference between variable proportional costs of the two technologies, the effective variable cost of any size film, including the chemicals, and for different sizes of digital film, variable costs of chest plus skeletal exams performed with the two techniques. Afterwards the economical effect was considered taking into account depreciation during a time of utilization ranging between 8 and 4 years. In the second part of the analysis the total cost and the revenues of the two technologies were determined. The comparison between the digital and conventional systems has shown the following aspects: 1. Digital radiography system has a much higher investment cost in comparison with the conventional one. 2. Operating costs of digital equipment are higher or lower depending on the film size used. Evaluating chest X-ray we reach a breakeven point after 1 year and 10,000 exams only if displayed over 8 x 10-in. film and after 30,000 if displayed over a 11 x 14-in. film. 3. The total cost (variable cost, technology cost, labour cost) of digital technology is lower than that of the conventional system by 20 % on average using 8 x 10-in. film size. 4. Digital technology also allows lesser film waste and lesser film per exam (orig.)

Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

Directory of Open Access Journals (Sweden)

Maarten Messagie

2013-11-01

Full Text Available Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventional petrol and diesel vehicles. The assessments are done from a life cycle perspective. The effect on human health, resources and ecosystems is considered when calculating the environmental impact. The total cost of ownership (TCO model includes the purchase price, registration and road taxes, insurance, fuel or electricity cost, maintenance, tires replacement, technical control, battery leasing and battery replacement. In the presented analysis different vehicle technologies and fuels are compared (petrol, diesel, hybrid electric vehicles (HEVs, battery electric vehicles (BEVs and plug-in hybrid electric vehicles (PHEVs on their level of environmental impact and cost per kilometer. The analysis shows a lower environmental impact for electric vehicles. However, electric vehicles have a higher total cost of ownership compared to conventional vehicles, even though the fuel operating costs are significantly lower. The purchase cost of electric vehicles is highly linked to the size of the battery pack, and not to the size of the electric vehicle. This explains the relative high cost for the electric city cars and the comparable cost for the medium and premium cars.

Comparative Analysis of Environmental Impacts of Selected Products

Directory of Open Access Journals (Sweden)

A. Fedoryszyn

2013-01-01

Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method.The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authorsindicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

Comparative Analysis of Environmental Impacts of Selected Products

Directory of Open Access Journals (Sweden)

Fedoryszyn A.

2013-03-01

Full Text Available The purpose of the present study is to demonstrate that environmental impacts exerted by manufactured products throughout their entire life cycle are major aspects to be considered, alongside their functional features and cost-effectiveness. One of the available methods to evaluate environmental impacts is known to as the Life Cycle Assessment (LCA method. The study summarises the reports from the literature on the subject of environmental impact assessment. In conclusions, the authors indicate the need for assessing the environmental impact of cast products made from conventional and newly introduced alloys.

Environmental and economic assessments of magnetic and inertial fusion energy reactors

Science.gov (United States)

Yamazaki, K.; Oishi, T.; Mori, K.

2011-10-01

Global warming due to rapid greenhouse gas (GHG) emissions is one of the present-day crucial problems, and fusion reactors are expected to be abundant electric power generation systems to reduce human GHG emission amounts. To search for an environmental-friendly and economical fusion reactor system, comparative system studies have been done for several magnetic fusion energy reactors, and have been extended to include inertial fusion energy reactors. We clarify new scaling formulae for the cost of electricity and GHG emission rate with respect to key design parameters, which might be helpful in making a strategy for fusion research development. Comparisons with other conventional electric power generation systems are carried out taking into account the introduction of GHG taxes and the application of the carbon dioxide capture and storage system to fossil power generators.

Determination of the protonation state of the Asp dyad: conventional molecular dynamics versus thermodynamic integration.

Science.gov (United States)

Huang, Jinfeng; Zhu, Yali; Sun, Bin; Yao, Yuan; Liu, Junjun

2016-03-01

The protonation state of the Asp dyad is important as it can reveal enzymatic mechanisms, and the information this provides can be used in the development of drugs for proteins such as memapsin 2 (BACE-1), HIV-1 protease, and rennin. Conventional molecular dynamics (MD) simulations have been successfully used to determine the preferred protonation state of the Asp dyad. In the present work, we demonstrate that the results obtained from conventional MD simulations can be greatly influenced by the particular force field applied or the values used for control parameters. In principle, free-energy changes between possible protonation states can be used to determine the protonation state. We show that protonation state prediction by the thermodynamic integration (TI) method is insensitive to force field version or to the cutoff for calculating nonbonded interactions (a control parameter). In the present study, the protonation state of the Asp dyad predicted by TI calculations was the same regardless of the force field and cutoff value applied. Contrary to the intuition that conventional MD is more efficient, our results clearly show that the TI method is actually more efficient and more reliable for determining the protonation state of the Asp dyad.

Pest management strategies: Area-wide and conventional

International Nuclear Information System (INIS)

Lindquist, D.A.

2000-01-01

part of the cost of an area-wide programme will be fighting the target pest away from the commercial production - before the commercial crops are susceptible - on wild or alternate hosts or abandoned orchards, untreated host plants in homeowners' gardens, etc. In most cases, area-wide insect control will be the responsibility of a separate organisation hired by the producers. A separate organisation can plan an aggressive offense against the target pest population over the entire area. High technology systems can be effectively utilised to plan the population management programme. Included will be satellite imagery to detect alternate hosts, sensitive methods to detect movement of the pest populations, computer programmes to predict changes in the pest insect population based on biological parameters, a systems approach to utilise natural enemies on an area-wide basis, genetic analysis to detect the development of resistance and utilisation of systems to delay the development of resistance over the total area. Further, area-wide programmes encourage the use of specialised methods of insect control that are not effective or are not used on a farm by farm basis. These include the sterile insect technique (SIT), male annihilation, inundative releases of parasites, mating inhibitors, large-scale trap cropping with very attractive plants, treatment of alternate hosts on public lands and hosts in private gardens, etc. The objective of area-wide control is to reduce the pest population within the target area to a non-economic level. This is accomplished by attacking the entire insect pest population in the target area. Conventional insect control attempts to protect the plant or animal, is carried out by individual producers over a small area with little planning, is short-term, low technology and is a reactive (defense) approach to insect control. Area-wide insect control attempts to reduce the pest population to a non-economic level over a large area involving many

Product environmental footprint of strawberries: Case studies in Estonia and Germany.

Science.gov (United States)

Soode-Schimonsky, Eveli; Richter, Klaus; Weber-Blaschke, Gabriele

2017-12-01

The environmental impacts of strawberries have been assessed in several studies. However, these studies either present dissimilar results or only focus on single impact categories without offering a comprehensive overview of environmental impacts. We applied the product environmental footprint (PEF) methodology to broadly indicate the environmental impacts of various strawberry production systems in Germany and Estonia by 15 impact categories. Data for the 7 case studies were gathered from two farms with organic and two farms with conventional open field production systems in Estonia and from one farm with conventional open field and one farm with a polytunnel and greenhouse production system in Germany. The greenhouse production system had the highest environmental impact with a PEF of 0.0040. In the field organic production systems, the PEF was 0.0029 and 0.0028. The field conventional production systems resulted in a PEF of 0.0008, 0.0009 and 0.0002. Polytunnel PEF was 0.0006. Human toxicity cancer effects, particulate matter and human toxicity non-cancer effects resulted in the highest impact across all analysed production systems. The main contributors were electricity for cooling, heating the greenhouse and the use of agricultural machinery including fuel burning. While production stage contributed 85% of the total impact in the greenhouse, also other life cycle stages were important contributors: pre-chain resulted in 71% and 90% of impact in conventional and polytunnels, respectively, and cooling was 47% in one organic system. Environmental impact from strawberry cooling can be reduced by more efficient use of the cooling room, increasing the strawberry yield or switching from oil shale electricity to other energy sources. Greenhouse heating is the overall impact hotspot even if it based on renewable resources. A ranking of production systems based on the environmental impact is possible only if all relevant impacts are included. Future studies should aim

Determination of the Removal Efficiency of Linear Alkyl Benzene Sulphonate Acids (LAS in Fixed Bed Aeration Tank and Conventional Activated Sludge

Directory of Open Access Journals (Sweden)

Asghar Ebrahimi

2011-03-01

Full Text Available Linear Alkyl Benzene Sulphonate Acids (LAS are one of the anionic surfactants that are produced and used in large quantities in different countries and find their way into the natural environment through sewer systems. These compounds may potentially cause environmental hazards in such surface waters as rivers. It is, therefore, necessary to remove as much of these compounds as possible by biological processes in wastewater treatment plants. For this purpose, four parallel biological reactors were constructed that used the conventional activated sludge and aeration tanks with fixed bed on the bench scale in order to evaluate the removal efficiency of LAS. The reactors were operated under conditions similar to domestic wastewater treatment plants. Parameters of interest were measured according to standard methods and ANOVA and T-test were used for the statistical analysis of the data. The results showed that aeration tanks with fixed beds yielded higher values of LAS and COD removal and air consumption compared to the conventional activated sludge system. It was shown that the two systems studied achieved LAS removal efficiencies of 96% and 94% for an influent LAS concentration of 5 mg/L. Further, it was found that the effluents from both systems satisfied water quality standards for discharge into surface waters (

Nonlinear undulator tapering in conventional SASE regime at baseline electron beam parameters as a way to optimize the radiation characteristics of the European XFEL

Energy Technology Data Exchange (ETDEWEB)

Serkez, Svitozar; Kocharyan, Vitali; Saldin, Evgeni; Zagorodnov, Igor [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Geloni, Gianluca [European XFEL GmbH, Hamburg (Germany)

2013-09-15

We demonstrate that the output radiation characteristics of the European XFEL sources at nominal operation point can be easily made significantly better than what is currently reported in the TDRs of scientific instruments and X-ray optics. In fact, the output SASE characteristics of the baseline European XFEL have been previously optimized assuming uniform undulators at a nominal operating point of 5 kA peak current, without considering the potential of undulator tapering in the SASE regime. In order to illustrate this point, we analyze the case of an electron bunch with nominal parameters. Based on start-to-end simulations, we demonstrate that nonlinear undulator tapering allows one to achieve up to a tenfold increase in peak power and photon spectral density in the conventional SASE regime, without modification to the baseline design. The FEL code Genesis has been extensively used for these studies. In order to increase our confidence in simulation results, we cross-checked outcomes by reproducing simulations in the deep nonlinear SASE regime with tapered undulator using the code ALICE.

Effects of High-Definition and Conventional tDCS on Response Inhibition.

Science.gov (United States)

Hogeveen, J; Grafman, J; Aboseria, M; David, A; Bikson, M; Hauner, K K

2016-01-01

Response inhibition is a critical executive function, enabling the adaptive control of behavior in a changing environment. The inferior frontal cortex (IFC) is considered to be critical for response inhibition, leading researchers to develop transcranial direct current stimulation (tDCS) montages attempting to target the IFC and improve inhibitory performance. However, conventional tDCS montages produce diffuse current through the brain, making it difficult to establish causality between stimulation of any one given brain region and resulting behavioral changes. Recently, high-definition tDCS (HD-tDCS) methods have been developed to target brain regions with increased focality relative to conventional tDCS. Remarkably few studies have utilized HD-tDCS to improve cognitive task performance, however, and no study has directly compared the behavioral effects of HD-tDCS to conventional tDCS. In the present study, participants received either HD-tDCS or conventional tDCS to the IFC during performance of a response inhibition task (stop-signal task, SST) or a control task (choice reaction time task, CRT). A third group of participants completed the same behavioral protocols, but received tDCS to a control site (mid-occipital cortex). Post-stimulation improvement in SST performance was analyzed as a function of tDCS group and the task performed during stimulation using both conventional and Bayesian parameter estimation analyses. Bayesian estimation of the effects of HD- and conventional tDCS to IFC relative to control site stimulation demonstrated enhanced response inhibition for both conditions. No improvements were found after control task (CRT) training in any tDCS condition. Results support the use of both HD- and conventional tDCS to the IFC for improving response inhibition, providing empirical evidence that HD-tDCS can be used to facilitate performance on an executive function task. Copyright © 2016 Elsevier Inc. All rights reserved.

Multidetector-row CT angiography of hepatic artery: comparison with conventional angiography

International Nuclear Information System (INIS)

Kim, Jin Woong; Jeong, Yong Yeon; Yoon, Woong; Kim, Jae Kyu; Park, Jin Gyoon; Seo, Jeong Jin; Kang, Heoung Keun

2003-01-01

To determine the usefulness of three-dimensional CT angiography using multidetector-row CT (MD-CT) for delineating the arterial anatomy of the liver. Hepatic arterial three-dimensional CT angiography was performed using MDCT (lightspeed Qx/I; GE medical systems, milwaukee, Wis., U.S.A.) in 45 patients with HCC undergoing conventional angiography for transcatheter hepatic arterial chemoembolization. The scanning parameters during the early arterial phase were 2.5 mm slice thickness, 7.5 mm rotation of table speed, and a pitch of 3. Images were obtained by one radiologist using maximum intensity projection from axial CT images obtained during the early arterial phase. Two radiologists blinded to the findings of conventional angiography independently evaluated the hepatic arterial anatomy and the quality of the images obtained. Compared with conventional angiography, reader A correctly evaluated the hepatic arterial anatomy depicted at three-dimensional CT angiography. Reader B's evaluation was correct in 40 of 45 patients. Interobserver agreement was good (kappa value, 0.73), and both readers assessed the quality of three-dimensional CT angiography as excellent. Three-dimensional CT angiography using MDCT was accurate for delineating the arterial anatomy of the liver, and interobserver agreement was good. The modality may provide, prior to conventional angiography, valuable information regrading a patient's hepatic arterial anatomy

Trading trash: why the U.S. won't sign on to the Basel convention.

Science.gov (United States)

Schmidt, C W

1999-08-01

Environmentalists worry that hazardous wastes produced in industrialized nations are being dumped in cash-starved developing countries--the countries with the least political or economic clout to resist and the fewest resources for managing these toxic imports. Imported waste can pose a serious threat to the health of human populations and ecosystems if not managed appropriately. In 1989, the international community initiated efforts to reduce the flow of hazardous wastes from industrialized countries to developing countries by drafting a treaty known as the Basel Convention on the Control of Transboundary Wastes and their Disposal. The convention's mission is to strictly regulate the international transfer of hazardous wastes and to ensure that wastes are managed and disposed of in an environmentally sound manner. Although the United States supports the convention in theory, it remains the only industrialized country within the Organization for Economic Cooperation and Development yet to ratify it. However, legislation drafted by the Clinton administration that is soon to go before the 106th Congress could make the United States a party to the convention.

Environmental assessment of solid waste landfilling technologies by means of LCA-modeling

DEFF Research Database (Denmark)

Manfredi, Simone; Christensen, Thomas Højlund

2009-01-01

By using life cycle assessment (LCA) modeling, this paper compares the environmental performance of six landfilling technologies (open dump, conventional landfill with flares, conventional landfill with energy recovery, standard bioreactor landfill, flushing bioreactor landfill and semi......-aerobic landfill) and assesses the influence of the active operations practiced on these performances. The environmental assessments have been performed by means of the LCA-based tool EASEWASTE, whereby the functional unit utilized for the LCA is “landfilling of 1 ton of wet household waste in a 10 m deep landfill...... that it is crucially important to ensure the highest collection efficiency of landfill gas and leachate since a poor capture compromises the overall environmental performance. Once gas and leachate are collected and treated, the potential impacts in the standard environmental categories and on spoiled groundwater...

Study of greenhouse gases reduction alternatives for the exploitation of non conventional oil sands in Canada

Energy Technology Data Exchange (ETDEWEB)

Bouchonneau, Deborah [Institut Francais du Petrole (IFP), Paris (France)

2008-07-01

High energy prices and greenhouse gases reduction represent the main challenges the current worldwide energetic situation has to face. As a consequence, paradox strategies can be highlighted: oil prices are sufficiently high to exploit non conventional oil resources, like extra heavy oils and oil sands. But the production of these resources emits larger GHG than the conventional oil path and implies other major environmental issues (water management, risks of soil pollution, destruction of the boreal forest), incompatible with the rules validated by the protocol of Kyoto. At the light of the new greenhouse gases reduction regulation framework announced by the Canadian Federal government, this work focuses on the study of greenhouse gases reduction alternatives applied to the non conventional oil sands exploitation in Canada. (author)

The likely adverse environmental impacts of renewable energy sources

International Nuclear Information System (INIS)

Abbasi, S.A.; Abbasi, Naseema

2000-01-01

The global attention has always been focused on the adverse environmental impacts of conventional energy sources. In contrast nonconventional energy sources, particularly the renewable ones, have enjoyed a 'clean' image vis a vis environmental impacts. The only major exception to this general trend has been large hydropower projects; experience has taught us that they can be disastrous for the environment. The belief now is that minihydel and microhydel projects are harmless alternatives. But are renewable energy sources really as benign as is widely believed? The present essay addresses this question in the background of Lovin's classical paradigm, which had postulated the hard (malignant) and soft (benign) energy concepts in the first place. It critically evaluates the environmental impacts of major renewable energy sources. It then comes up with the broad conclusion that renewable energy sources are not the panacea they are popularly perceived to be; indeed in some cases their adverse environmental impacts can be as strongly negative as the impacts of conventional energy sources. The paper also dwells on the steps we need to take so that we can utilise renewable energy sources without facing environmental backlashes of the type we got from hydropower projects. (Author)

Gonioscopic changes in conventional ECCE vs manual SICS: A comparative study

Directory of Open Access Journals (Sweden)

Surya Joseph, Sundararajan D, Rajvin Samuel Ponraj, Srinivasan M, Veluchamy

2014-04-01

Full Text Available The aim of the study is to observe and compare the Gonioscopic changes in the angle of the anterior chamber of the eye after surgeries namely; Conventional Extra capsular cataract extraction (ECCE with Posterior chamber Intraocular lens (PC IOL implantation, Manual Small incision Cataract Surgery with PCIOL implantation. The clinical study was undertaken after Institutional Ethical committee clearance, securing the inform consent, total number of 100 patients were enrolled in the study. 50 ECCE; 50 SICS consisting of 57 Males and 43 Females aged between 40 – 80yrs who were admitted and operated for Cataract at Meenakshi Medical college Hospital & Research institute. The following parameters are studied: Gonioscopic changes in the angle, namely the PAS formation in the quadrants, pigment dispersion in each of the methods. After this study, we arrive to a conclusion that complications in the angle of anterior chamber occur mostly in Conventional with insignificant change in manual SICS. So manual Small incision Cataract Surgery with PCIOL implantation is preferable over Conventional ECCE with PCIOL implantation.

Simulation study of a capillary film solar still coupled with a conventional solar still in south Algeria

International Nuclear Information System (INIS)

Zerrouki, Moussa; Settou, Noureddine; Marif, Yacine; Belhadj, Mohmed Mustapha

2014-01-01

Highlights: • Coupling in series a capillary film solar still and a conventional solar still. • Combined heat and mass transfer analyses in solar distillation systems. • Design parameters of the system are optimized by simulation program. - Abstract: This work presents a numerical simulation of capillary film solar still (distiller) coupled in series with another conventional solar still. Different transfer phenomena of heat and mass are considered to evaluate the daily distillate production. The study takes into account the quality of brackish water with moderate salinity in Adrar city (south of Algeria). The performance of the system is evaluated and compared with that of conventional solar still under the same meteorological conditions. A numerical simulation is carried out to appreciate the developed model and to optimize the relationship between both distillers collecting surfaces. The obtained results show that the system daily production is at 54–83% higher than that of the conventional one. In addition, some parameters influences are studied to define the optimal operating conditions for the present system. For the first solar still, the inclination angle and surfaces ratio have a significant effect on distillate production. Brine flow rate and wind speed have slight effect on still production

Removal of Strontium from Drinking Water by Conventional ...

Science.gov (United States)

The United States Environmental Protection Agency Contaminant Candidate List 3 lists strontium as a contaminant for potential regulatory consideration in drinking water. There is very little data available on strontium removal from drinking water. As a result, there is an immediate need to perform treatment studies. The objective of this work is to evaluate the effectiveness of conventional and lime-soda ash softening treatments to remove strontium from surface and ground waters. Conventional drinking water treatment with aluminum and iron coagulants were able to achieve 12% and 5.9% strontium removal at best, while lime softening removed as much as 78% from natural strontium-containing ground water. Systematic fundamental experiments showed that strontium removal during the lime-soda ash softening was related to pH, calcium concentration and dissolved inorganic carbon concentration. Final strontium concentration was also directly associated with initial strontium concentration. Precipitated solids showed well-formed crystals or agglomerates of mixed solids, two polymorphs of calcium carbonate (vaterite and calcite), and strontianite, depending on initial water quality conditions. X-ray diffraction analysis suggested that strontium likely replaced calcium inside the crystal lattice and was likely mainly responsible for removal during lime softening. To inform the public.

Effects of particle composition and environmental parameters on catalytic hydrodechlorination of trichloroethylene by nanoscale bimetallic Ni-Fe.

Science.gov (United States)

Wei, Jianjun; Qian, Yajing; Liu, Wenjuan; Wang, Lutao; Ge, Yijie; Zhang, Jianghao; Yu, Jiang; Ma, Xingmao

2014-05-01

Catalytic nickel was successfully incorporated into nanoscale iron to enhance its dechlorination efficiency for trichloroethylene (TCE), one of the most commonly detected chlorinated organic compounds in groundwater. Ethane was the predominant product. The greatest dechlorination efficiency was achieved at 22 molar percent of nickel. This nanoscale Ni-Fe is poorly ordered and inhomogeneous; iron dissolution occurred whereas nickel was relatively stable during the 24-hr reaction. The morphological characterization provided significant new insights on the mechanism of catalytic hydrodechlorination by bimetallic nanoparticles. TCE degradation and ethane production rates were greatly affected by environmental parameters such as solution pH, temperature and common groundwater ions. Both rate constants decreased and then increased over the pH range of 6.5 to 8.0, with the minimum value occurring at pH 7.5. TCE degradation rate constant showed an increasing trend over the temperature range of 10 to 25°C. However, ethane production rate constant increased and then decreased over the range, with the maximum value occurring at 20°C. Most salts in the solution appeared to enhance the reaction in the first half hour but overall they displayed an inhibitory effect. Combined ions showed a similar effect as individual salts. Copyright © 2014 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Current policies, strategies and aspects of environmental impact assessment in a transboundary context

International Nuclear Information System (INIS)

1996-01-01

Environmental impact assessment (EIA) has already shown its value for implementing and strengthening sustainable development, as it combines the precautionary principles with the principle of preventing environmental damage and also arranges for public participation. EIA is already used as an effective instrument for improving the quality of the environment at the national level and it is understood that the EIA Convention will lead to environmentally sound and sustainable development by providing information on the interrelationship between economic activities and their environmental consequences in particular in a transboundary context. The Convention obliges Parties to assess the environmental impacts at an early stage of planning and includes measures and procedures to prevent, control or reduce any significant adverse effect on the environment, particularly any transboundary effect, which is likely to be caused by a proposed activity or any major change to an existing activity

An Empirical Test of Self-Determination Theory as a Guide to Fostering Environmental Motivation

Science.gov (United States)

Darner, Rebekka

2012-01-01

A goal of most environmental education is to motivate students toward environmentally friendly behaviour change. This article describes a study that elucidates how such motivation can be fostered in the classroom. It compared students' development of environmental motivation in a conventional post-secondary environmental biology course and a…

Integrated environmental control concepts for advanced power systems

International Nuclear Information System (INIS)

Rubin, E.S.; Kalagnanam, J.R.; Berkenpas, M.B.

1996-01-01

For both conventional and advanced power systems, the capability to estimate the performance and cost of environmental control systems is critical to a variety of planning and analysis requirements faced by utilities, regulators, researchers and analysts in the public and private sectors. This paper describes a computer model developed for the U.S. Department of Energy (USDOE) to provide an up-to-date capability for analyzing a variety of pre-combustion, combustion, and post-combustion options in an integrated framework. A unique feature of the model allows performance and costs of integrated environmental control concepts to be modeled probabilistically as a means of characterizing uncertainties and risks. Examples are presented of model applications comparing conventional and advanced emission control designs. 13 refs, 6 figs, 5 tabs

Helium-3 mass spectrometry for low-level tritium analysis of environmental samples

International Nuclear Information System (INIS)

Surano, K.A.; Hudson, G.B.; Failor, R.A.; Sims, J.M.; Holland, R.C.; MacLean, S.C.; Garrison, J.C.

1991-04-01

Helium-3 ( 3 He) mass spectrometry for the analysis of low-level tritium ( 3 H) concentrations in environmental sample matrices was compared with conventional low-level β-decay counting methods. The mass-spectrometry method compared favorably, equaling or surpassing conventional decay-counting methods with respect to most criteria. Additional research and method refinements may make 3 He mass spectrometry the method of choice for routine, low-level to very-low-level 3 H measurements in a wide variety of environmental samples in the future

MRI of persistent cloaca: Can it substitute conventional imaging?

Energy Technology Data Exchange (ETDEWEB)

Mohammad, Shaimaa Abdelsattar, E-mail: shaimaa96@hotmail.com [Department of Radiodiagnosis, Faculty of Medicine, Ain-Shams University (Egypt); AbouZeid, Amr Abdelhamid, E-mail: amrabdelhamid@hotmail.com [Department of Pediatric Surgery, Faculty of Medicine, Ain-Shams University (Egypt)

2013-02-15

Purpose: To define the role of MRI in the preoperative assessment of patients with persistent cloaca and whether it can substitute other imaging modalities. Methods: We prospectively examined eleven patients with persistent cloaca between July 2007 and March 2012. Non contrast MRI examinations were performed on 1.5 T magnet using head coil. Multiple pulse sequences (T1WI, T2WI, fat suppression) were obtained in axial, sagittal and coronal planes of the pelvis, abdomen, and spine. The scans were reviewed for the following: the level and type of rectal termination, the developmental state of striated muscle complex (SMC), associated genitourinary and spinal anomalies. MRI findings were compared to conventional fluoroscopic imaging, operative and endoscopic findings. We applied novel MRI parameters (urethral length, relative hiatal distance and vaginal volume). The relation between different parameters was tested statistically using Pearson correlation test. Results: MRI could accurately demonstrate the level of bowel termination in patients with persistent cloaca, in addition to its high sensitivity for detection of mullerian anomalies which were present in 73% of patients. Furthermore, MRI could disclose associating renal and spinal anomalies, and assess the developmental state of SMC. The shorter the urethra (higher urogenital confluence), the narrower the pelvic hiatus, and the more was the obstruction (vaginal distension). Conclusion: MRI is a valuable tool in exploring the different internal anatomical features of the cloacal anomaly; and when combined with endoscopy, MRI can make other preoperative conventional imaging unnecessary.

What is the effect of optimum independent parameters on solar heating systems?

International Nuclear Information System (INIS)

Kaçan, Erkan; Ulgen, Koray; Kaçan, Erdal

2015-01-01

Highlights: • The efficiency effect of 4 independent parameters over the solar heating system are examined. • 3 of 4 independent parameters are found as decisive parameter for system design. • Maximum exergetic efficiency exceeded 11% at optimized process. • Maximum environmental efficiency reached up to 95% at optimized process. • The optimum outside temperature and solar radiation are found as 22 °C and 773 W/m"2 for all responses. - Abstract: Researchers are rather closely involved in Solar Combisystems recently, but there is lack of study that presents the optimum design parameters. Therefore, in this study the influence of the four major variables, namely; outside, inside temperature, solar radiation on horizontal surface and instantaneous efficiency of solar collector on the energetic, exergetic and environmental efficiencies of Solar Combisystems are investigated and system optimization is done by a combination of response surface methodology. Measured parameters and energetic–exergetic and environmental performance curves are found and statistical model is created parallel with the actual data. It is found that statistical model is significant and all “lack-of-fit” values are non-significant. Thus, it is proved that statistical model strongly represents the design model. Outside temperature, solar radiation on horizontal surface and instantaneous efficiency of solar collector are the decisive parameters for all responses but instantaneous efficiency of solar collector is not for environmental efficiency. Maximum exergetic efficiency exceeded 11%, maximum environmental efficiency reached up to 95% at optimized process. The optimum value of the outside temperature and solar radiation are found as 22 °C and 773 W/m"2 for all responses, on the other hand optimum collector efficiency is found around 60% for energetic and exergetic efficiency values. Inside temperature is not a decisive parameter for all responses.

Ecosystem Services in Biologically Diversified versus Conventional Farming Systems: Benefits, Externalities, and Trade-Offs

Directory of Open Access Journals (Sweden)

Claire Kremen

2012-12-01

Full Text Available We hypothesize that biological diversification across ecological, spatial, and temporal scales maintains and regenerates the ecosystem services that provide critical inputs - such as maintenance of soil quality, nitrogen fixation, pollination, and pest control - to agriculture. Agrobiodiversity is sustained by diversified farming practices and it also supplies multiple ecosystem services to agriculture, thus reducing environmental externalities and the need for off-farm inputs. We reviewed the literature that compares biologically diversified farming systems with conventional farming systems, and we examined 12 ecosystem services: biodiversity; soil quality; nutrient management; water-holding capacity; control of weeds, diseases, and pests; pollination services; carbon sequestration; energy efficiency and reduction of warming potential; resistance and resilience to climate change; and crop productivity. We found that compared with conventional farming systems, diversified farming systems support substantially greater biodiversity, soil quality, carbon sequestration, and water-holding capacity in surface soils, energy-use efficiency, and resistance and resilience to climate change. Relative to conventional monocultures, diversified farming systems also enhance control of weeds, diseases, and arthropod pests and they increase pollination services; however, available evidence suggests that these practices may often be insufficient to control pests and diseases or provide sufficient pollination. Significantly less public funding has been applied to agroecological research and the improvement of diversified farming systems than to conventional systems. Despite this lack of support, diversified farming systems have only somewhat reduced mean crop productivity relative to conventional farming systems, but they produce far fewer environmental and social harms. We recommend that more research and crop breeding be conducted to improve diversified farming

EU Water Framework Directive and Stockholm Convention: can we reach the targets for priority substances and persistent organic pollutants?

Science.gov (United States)

Fuerhacker, Maria

2009-08-01

Water is a renewable resource and acceptable quality is important for human health, ecological and economic reasons, but human activity can cause great damage to the natural aquatic environment. Managing the water cycle in a sustainable way is the key to protect natural resources and human health. On a global level, the microbiological contamination of water sources is a major problem in connection with poverty and the United Nations Millennium Development Declaration is an important initiative to handle this problem. In terms of environmental health, persistent organic pollutants (POPs) circulate globally; as they travel long distances, they are found in remote areas far from their original source of application and can cause damage wherever they move to. On a global scale, United Nations Environmental Programme (UNEP) issued the Stockholm Convention to reduce POPs; in the European Union (EU), one intention of the Water Framework Directive (WFD) is to reach the good chemical status of waters; beside these regulations, there are other directives in support of these goals. The aim of this paper is to discuss whether the Stockholm Convention and the WFD allows meeting the targets of protection of human and environmental health, which are established in the different directives and how could we approach the targets. The aims and scopes of different directives are compiled and compared with the actual quality of water, different approaches of standard settings are compared and potential treatment options are discussed. Under the Stockholm Convention on POPs, which came into force in May 2004, governments are required to develop a National Implementation Plan (NIP) setting out how they will address their obligations under the convention and how they will take measures to eliminate or reduce the release of POPs into the environment by the use of best available techniques (BAT) and application of best environmental practices (BEP). On a European level, the WFD has been in

Environmental parameters altered by climate change affect the activity of soil microorganisms involved in bioremediation.

Science.gov (United States)

Alkorta, Itziar; Epelde, Lur; Garbisu, Carlos

2017-10-16

Bioremediation, based on the use of microorganisms to break down pollutants, can be very effective at reducing soil pollution. But the climate change we are now experiencing is bound to have an impact on bioremediation performance, since the activity and degrading abilities of soil microorganisms are dependent on a series of environmental parameters that are themselves being altered by climate change, such as soil temperature, moisture, amount of root exudates, etc. Many climate-induced effects on soil microorganisms occur indirectly through changes in plant growth and physiology derived from increased atmospheric CO2 concentrations and temperatures, the alteration of precipitation patterns, etc., with a concomitant effect on rhizoremediation performance (i.e. the plant-assisted microbial degradation of pollutants in the rhizosphere). But these effects are extremely complex and mediated by processes such as acclimation and adaptation. Besides, soil microorganisms form complex networks of interactions with a myriad of organisms from many taxonomic groups that will also be affected by climate change, further complicating data interpretation. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Environmental health risk assessment: Energy systems

International Nuclear Information System (INIS)

Krewski, D.; Somers, E.; Winthrop, S.O.

1984-01-01

Most industrialized nations have come to rely on a variety of systems for energy production, both of a conventional and non-conventional nature. In the paper, the spectrum of energy systems currently in use in Canada is outlined along with their potential health risks. Several examples of environmental health studies involving both outdoor and indoor air pollution related to energy production in Canada are reported. The limitations of current technologies for assessing health risks are discussed and possible approaches to managing energy related health risks are indicated. (author)

Open-top selective plane illumination microscope for conventionally mounted specimens.

Science.gov (United States)

McGorty, Ryan; Liu, Harrison; Kamiyama, Daichi; Dong, Zhiqiang; Guo, Su; Huang, Bo

2015-06-15

We have developed a new open-top selective plane illumination microscope (SPIM) compatible with microfluidic devices, multi-well plates, and other sample formats used in conventional inverted microscopy. Its key element is a water prism that compensates for the aberrations introduced when imaging at 45 degrees through a coverglass. We have demonstrated its unique high-content imaging capability by recording Drosophila embryo development in environmentally-controlled microfluidic channels and imaging zebrafish embryos in 96-well plates. We have also shown the imaging of C. elegans and moving Drosophila larvae on coverslips.

Glass-forming liquids: one or more "order" parameters"

DEFF Research Database (Denmark)

Bailey, Nicholas; Christensen, Tage Emil; Jakobsen, Bo

2008-01-01

We first summarize the classical arguments that the vast majority of glass-forming liquids require more than one ‘order' parameter for their description. Critiques against this conventional wisdom are then presented, and it is argued that the matter deserves to be reconsidered in the light...... that a description with a single "order" parameter applies to a good approximation whenever thermal equilibrium fluctuations of fundamental variables like energy and pressure are strongly correlated. Results from computer simulations showing that this is the case for a number of simple glass-forming liquids, as well...

DC Motor Parameter Identification Using Speed Step Responses

Directory of Open Access Journals (Sweden)

Wei Wu

2012-01-01

Full Text Available Based on the DC motor speed response measurement under a step voltage input, important motor parameters such as the electrical time constant, the mechanical time constant, and the friction can be estimated. A power series expansion of the motor speed response is presented, whose coefficients are related to the motor parameters. These coefficients can be easily computed using existing curve fitting methods. Experimental results are presented to demonstrate the application of this approach. In these experiments, the approach was readily implemented and gave more accurate estimates than conventional methods.

Comparing the Mass, Energy, and Cost Effects of Lightweighting in Conventional and Electric Passenger Vehicles

Directory of Open Access Journals (Sweden)

Johannes Hofer

2014-09-01

Full Text Available In this work the effect of weight reduction using advanced lightweight materials on the mass, energy use, and cost of conventional and battery electric passenger vehicles is compared. Analytic vehicle simulation is coupled with cost assessment to find the optimal degree of weight reduction minimizing manufacturing and total costs. The results show a strong secondary weight and cost saving potential for the battery electric vehicles, but a higher sensitivity of vehicle energy use to mass reduction for the conventional vehicle. Generally, light weighting has the potential to lower vehicle costs, however, the results are very sensitive to parameters affecting lifetime fuel costs for conventional and battery costs for electric vehicles. Based on current technology cost estimates it is shown that the optimal amount of primary mass reduction minimizing total costs is similar for conventional and electric vehicles and ranges from 22% to 39%, depending on vehicle range and overall use patterns. The difference between the optimal solutions minimizing manufacturing versus total costs is higher for conventional than battery electric vehicles.

Environmental efficiency of energy, materials, and emissions.

Science.gov (United States)

Yagi, Michiyuki; Fujii, Hidemichi; Hoang, Vincent; Managi, Shunsuke

2015-09-15

This study estimates the environmental efficiency of international listed firms in 10 worldwide sectors from 2007 to 2013 by applying an order-m method, a non-parametric approach based on free disposal hull with subsampling bootstrapping. Using a conventional output of gross profit and two conventional inputs of labor and capital, this study examines the order-m environmental efficiency accounting for the presence of each of 10 undesirable inputs/outputs and measures the shadow prices of each undesirable input and output. The results show that there is greater potential for the reduction of undesirable inputs rather than bad outputs. On average, total energy, electricity, or water usage has the potential to be reduced by 50%. The median shadow prices of undesirable inputs, however, are much higher than the surveyed representative market prices. Approximately 10% of the firms in the sample appear to be potential sellers or production reducers in terms of undesirable inputs/outputs, which implies that the price of each item at the current level has little impact on most of the firms. Moreover, this study shows that the environmental, social, and governance activities of a firm do not considerably affect environmental efficiency. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Sensitivity Analysis Approach to Identify Key Environmental Performance Factors

Directory of Open Access Journals (Sweden)

Xi Yu

2014-01-01

Full Text Available Life cycle assessment (LCA is widely used in design phase to reduce the product’s environmental impacts through the whole product life cycle (PLC during the last two decades. The traditional LCA is restricted to assessing the environmental impacts of a product and the results cannot reflect the effects of changes within the life cycle. In order to improve the quality of ecodesign, it is a growing need to develop an approach which can reflect the changes between the design parameters and product’s environmental impacts. A sensitivity analysis approach based on LCA and ecodesign is proposed in this paper. The key environmental performance factors which have significant influence on the products’ environmental impacts can be identified by analyzing the relationship between environmental impacts and the design parameters. Users without much environmental knowledge can use this approach to determine which design parameter should be first considered when (redesigning a product. A printed circuit board (PCB case study is conducted; eight design parameters are chosen to be analyzed by our approach. The result shows that the carbon dioxide emission during the PCB manufacture is highly sensitive to the area of PCB panel.

Evaluation of respiratory parameters in minimally processed lettuce grown under organic or conventional system

Directory of Open Access Journals (Sweden)

Júlio César Mello

2010-12-01

Full Text Available The increased preference for minimally processed vegetables has been attributed to the health benefits associated with fresh produce and the demand for ready-to-eat salads. In this paper, lettuce (Lactuca sativa L. was evaluated for the effects of different cropping systems on the respiratory properties. Lettuce was packaged in low density polyethylene bags and stored in a refrigerator at 4 ºC. The concentration of carbon dioxide and oxygen inside the package was monitored during the storage at zero, three, six, eight, ten and twelve days by gas chromatography. Dry matter variation was measured gravimetrically up to day fourteen of storage. Values of respiratory rate for conventional lettuce increased from day 1 to 3 and remained low, while respiratory rate of the organic lettuce increased three-fold up to day 8, stabilizing at a high level. Variation in dry matter during storage also resulted from differences between the two cultivation systems. The highest content of dry matter was achieved by organic lettuce.

Animal Board Invited Review: Comparing conventional and organic livestock production systems on different aspects of sustainability.

Science.gov (United States)

van Wagenberg, C P A; de Haas, Y; Hogeveen, H; van Krimpen, M M; Meuwissen, M P M; van Middelaar, C E; Rodenburg, T B

2017-10-01

To sustainably contribute to food security of a growing and richer world population, livestock production systems are challenged to increase production levels while reducing environmental impact, being economically viable, and socially responsible. Knowledge about the sustainability performance of current livestock production systems may help to formulate strategies for future systems. Our study provides a systematic overview of differences between conventional and organic livestock production systems on a broad range of sustainability aspects and animal species available in peer-reviewed literature. Systems were compared on economy, productivity, environmental impact, animal welfare and public health. The review was limited to dairy cattle, beef cattle, pigs, broilers and laying hens, and to Europe, North America and New Zealand. Results per indicators are presented as in the articles without performing additional calculations. Out of 4171 initial search hits, 179 articles were analysed. Studies varied widely in indicators, research design, sample size and location and context. Quite some studies used small samples. No study analysed all aspects of sustainability simultaneously. Conventional systems had lower labour requirements per unit product, lower income risk per animal, higher production per animal per time unit, higher reproduction numbers, lower feed conversion ratio, lower land use, generally lower acidification and eutrophication potential per unit product, equal or better udder health for cows and equal or lower microbiological contamination. Organic systems had higher income per animal or full time employee, lower impact on biodiversity, lower eutrophication and acidification potential per unit land, equal or lower likelihood of antibiotic resistance in bacteria and higher beneficial fatty acid levels in cow milk. For most sustainability aspects, sometimes conventional and sometimes organic systems performed better, except for productivity, which was

The role of the IAEA in the London Convention 1972 on Dumping of Wastes at Sea

International Nuclear Information System (INIS)

Telleria, Diego; Berkovsky, Volodymyr; Jova Sed, Luis; Louvat, Didier

2008-01-01

Full text: The Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter was adopted after an Inter-Governmental Conference, held in London in 1972, following the principles for environmental protection enunciated in the Report of the United Nations Conference on Human Environment, held the same year in Stockholm. The IAEA has been involved since the early days of the London Convention when the Contracting Parties designated the IAEA as the competent international authority in matters related to sea disposal of radioactive waste, providing technical advice and services. The IAEA developed, for the Convention, the definition of 'radioactive wastes or radioactive matters unsuitable for dumping at sea' (e.g., high level radioactive waste) and recommended the technical basis applicable by the national authorities to issue special permits for those radioactive materials which could be dumped (mainly low and intermediate level radioactive waste, properly conditioned and 'de minimis' quantities). However, in 1985, based more on political reasons than on the existing radiation protection principles and policies, the Contracting Parties to the London Convention introduced a 'voluntary moratorium' on the disposal of low level radioactive wastes at sea, and later in 1993, a total ban of radioactive waste disposal at sea. The IAEA continues to support the objectives of the London Convention by providing scientific advice. Since 1989, at the request of the Contracting Parties, the IAEA has developed and maintained global databases on radioactive waste disposed of at sea in the past and on accidents and losses at sea involving radioactive material. The purpose of these databases is to serve as the basis for radiological impact assessment on the marine environment. The last revised reports on the above mentioned inventories were published in 1999 and in 2001 respectively. The databases are currently in the process of being updated. The paper presents

Uncertainty related to Environmental Data and Estimated Extreme Events

DEFF Research Database (Denmark)

Burcharth, H. F.

The design loads on rubble mound breakwaters are almost entirely determined by the environmental conditions, i.e. sea state, water levels, sea bed characteristics, etc. It is the objective of sub-group B to identify the most important environmental parameters and evaluate the related uncertainties...... including those corresponding to extreme estimates typically used for design purposes. Basically a design condition is made up of a set of parameter values stemming from several environmental parameters. To be able to evaluate the uncertainty related to design states one must know the corresponding joint....... Consequently this report deals mainly with each parameter separately. Multi parameter problems are briefly discussed in section 9. It is important to notice that the quantified uncertainties reported in section 7.7 represent what might be regarded as typical figures to be used only when no more qualified...

Potential risk for bacterial contamination in conventional reused ventilator systems and disposable closed ventilator-suction systems.

Science.gov (United States)

Li, Ya-Chi; Lin, Hui-Ling; Liao, Fang-Chun; Wang, Sing-Siang; Chang, Hsiu-Chu; Hsu, Hung-Fu; Chen, Sue-Hsien; Wan, Gwo-Hwa

2018-01-01

Few studies have investigated the difference in bacterial contamination between conventional reused ventilator systems and disposable closed ventilator-suction systems. The aim of this study was to investigate the bacterial contamination rates of the reused and disposable ventilator systems, and the association between system disconnection and bacterial contamination of ventilator systems. The enrolled intubated and mechanically ventilated patients used a conventional reused ventilator system and a disposable closed ventilator-suction system, respectively, for a week; specimens were then collected from the ventilator circuit systems to evaluate human and environmental bacterial contamination. The sputum specimens from patients were also analyzed in this study. The detection rate of bacteria in the conventional reused ventilator system was substantially higher than that in the disposable ventilator system. The inspiratory and expiratory limbs of the disposable closed ventilator-suction system had higher bacterial concentrations than the conventional reused ventilator system. The bacterial concentration in the heated humidifier of the reused ventilator system was significantly higher than that in the disposable ventilator system. Positive associations existed among the bacterial concentrations at different locations in the reused and disposable ventilator systems, respectively. The predominant bacteria identified in the reused and disposable ventilator systems included Acinetobacter spp., Bacillus cereus, Elizabethkingia spp., Pseudomonas spp., and Stenotrophomonas (Xan) maltophilia. Both the reused and disposable ventilator systems had high bacterial contamination rates after one week of use. Disconnection of the ventilator systems should be avoided during system operation to decrease the risks of environmental pollution and human exposure, especially for the disposable ventilator system. ClinicalTrials.gov PRS / NCT03359148.

Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

OpenAIRE

Messagie, Maarten; Lebeau, Kenneth; Coosemans, Thierry; Macharis, Cathy; Mierlo, Joeri van

2013-01-01

Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventi...

Three-dimensional models of conventional and vertical junction laser-photovoltaic energy converters

Science.gov (United States)

Heinbockel, John H.; Walker, Gilbert H.

1988-01-01

Three-dimensional models of both conventional planar junction and vertical junction photovoltaic energy converters have been constructed. The models are a set of linear partial differential equations and take into account many photoconverter design parameters. The model is applied to Si photoconverters; however, the model may be used with other semiconductors. When used with a Nd laser, the conversion efficiency of the Si vertical junction photoconverter is 47 percent, whereas the efficiency for the conventional planar Si photoconverter is only 17 percent. A parametric study of the Si vertical junction photoconverter is then done in order to describe the optimum converter for use with the 1.06-micron Nd laser. The efficiency of this optimized vertical junction converter is 44 percent at 1 kW/sq cm.

Effects of environmental temperature fluctuations on the parameters of a thermoelectric battery

International Nuclear Information System (INIS)

Kozlov, Yu.F.; Oganov, E.P.

1980-01-01

A numerical analysis is presented for the effects of lags on the output parameters of a radioisotope thermoelectric battery under conditions of diurnal temperature variation in the environment. Allowance for the inertial effects causes a phase shift and change in amplitude of the variations in the thermal and electrical parameters. The amplitude of the temperature fluctuations in the hot junctions is substantially reduced, while the output electrical power increases. The data provide a more rigorous basis for choosing the parameters of radioisotope batteries during design. 9 refs

The effect of environmental parameters on contaminant uptake by a ...

African Journals Online (AJOL)

There was also no discernable relationship between pH and contaminants uptake by the sampling devices as was expected with non polar, non-ioniseable solutes. The uptake of compounds with lower molar volumes was most susceptible to the presence oh humic materials. Journal of Applied Sciences and Environmental ...

Guidelines for evaluating the environmental performance of Product/Service-Systems through life cycle assessment

DEFF Research Database (Denmark)

Kjær, Louise Laumann; Pigosso, Daniela C. A.; McAloone, Tim C.

2018-01-01

Product/Service-Systems (PSS) such as integrated solutions, performance-based contracts or sharing systems are often proposed as means to enable improved environmental sustainability. However, PSS are not necessarily environmentally benign compared to conventional systems. Quantitative environmen......Product/Service-Systems (PSS) such as integrated solutions, performance-based contracts or sharing systems are often proposed as means to enable improved environmental sustainability. However, PSS are not necessarily environmentally benign compared to conventional systems. Quantitative....... In this article, we propose a set of guidelines consisting of six steps, which elaborates the LCA process with respect to the specific consideration for PSS assessment. The guidelines were developed based on identified challenges for the application of LCA on PSS, a review of existing LCAs on PSS case studies...

Sustainability assessment for dry, conventional and cryogenic machining in face milling of ti-6al-4v

International Nuclear Information System (INIS)

Masood, I.; Jahanzaib, M.; Wasim, A.

2017-01-01

Sustainability achievement in difficult-to-machine materials is major concern now-a-days. This paper presents sustainability assessment of machining titanium alloy Ti-6Al-4V. Face milling of Ti-6Al-4V hardened to 55 HRC with PVD (Physical Vapour Deposition) coated inserts was analyzed for dry, conventional and cryogenic cooling modes. Experiments were designed using CCD (Central Composite Design) for modeling and analysis of surface roughness. Feed, speed and depth of cut were used as input parameters. For a specific surface finish, the three cooling modes were compared for cutting power, machining time and material removal rate. The results indicate that cryogenic cooling was more sustainable as compared to dry and conventional cooling process. This sustainable model will help to select sustainable input parameters. (author)

Conventional laparoscopic adrenalectomy versus laparoscopic adrenalectomy through mono port.

Science.gov (United States)

Kwak, Ha Na; Kim, Jun Ho; Yun, Ji-Sup; Son, Byung Ho; Chung, Woong Youn; Park, Yong Lai; Park, Chan Heun

2011-12-01

A standard procedure for single-port laparoscopic adrenal surgery has not been established. We retrospectively investigated intraoperative and postoperative outcomes after laparoscopic adrenalectomy through mono port (LAMP) and conventional laparoscopic adrenalectomy to assess the feasibility of LAMP. Between March 2008 and December 2009, 22 patients underwent adrenalectomy at the Department of Surgery, Kangbuk Samsung Hospital. Twelve patients underwent conventional laparoscopic adrenalectomy and 10 patients underwent LAMP. The same surgeon performed all the surgeries. The 2 procedures were compared in terms of tumor size, operating time, time to resumption of a soft diet, length of hospital day, and postoperative complications. The 2 groups were similar in terms of tumor size (30.08 vs. 32.50 mm, P=0.796), mean operating time (112.9 vs. 127 min, P=0.316), time to resumption of a soft diet (1.25 vs. 1.30 d, P=0.805), and length of hospital day (4.08 vs. 4.50 d, P=0.447). Despite 1 patient in the LAMP group experiencing ipsilateral pleural effusion as a postoperative complication, this parameter was similar for the 2 groups (P=0.195). Perioperative mortality, blood transfusion, and conversion to open surgery did not occur. Perioperative outcomes for LAMP were similar to those for conventional laparoscopic adrenalectomy. LAMP appears to be a feasible option for adrenalectomy.

Seasonal variation of meteorological factors on air parameters and ...

African Journals Online (AJOL)

The impacts of gas flaring on meteorological factors at Ibeno, Eket, Onna, Esit Eket and Umudike - Nigeria were investigated by measuring air quality parameters. The results show that the mean concentration of air parameters value were below Federal Environmental Protection Agency (FEPA) and United States ...

A paler shade of green : Environmental policy under induced technical change

NARCIS (Netherlands)

Di Maria, C.; Smulders, Sjak

2017-01-01

Conventional wisdom argues that environmental policy is less costly if it induces the development of cleaner technologies. In contrast to this argument, we show that once the second-best nature of actual economies is taken into account, the cost of environmental policy may well be larger with

Comparative Life Cycle Studies on Poly(3-hydroxybutyrate)-Based Composites as Potential Replacement for Conventional Petrochemical Plastics

NARCIS (Netherlands)

Pietrini, M.; Roes, A.L.; Patel, M.K.; Chiellini, E.

2007-01-01

A cradle-to-grave environmental life cycle assessment (LCA) of a few poly(3-hydroxybutyrate) (PHB) based composites has been performed and was compared to commodity petrochemical polymers. The end products studied are a cathode ray tube (CRT) monitor housing (conventionally produced from high-impact

Punta Higuero environmental studies

International Nuclear Information System (INIS)

Wood, E.D.; Youngbluth, M.J.; Nutt, M.E.; Yeaman, M.N.; Yoshioka, P.; Canoy, M.J.

1975-01-01

Site selection surveys and environmental research studies of seven coastal sites in Puerto Rico for construction of power generating facilities were carried out. Data are presented on the physical, chemical, and geological parameters of the Punta Higuero site, and the ecological parameters of zooplankton, benthic invertebrates, and fish communities. Plant associations are included. (U.S.)

A technical, economic, and environmental performance of grid-connected hybrid (photovoltaic-wind) power system in Algeria.

Science.gov (United States)

Saheb-Koussa, Djohra; Koussa, Mustapha; Said, Nourredine

2013-01-01

This paper studies the technical, economic, and environmental analysis of wind and photovoltaic power systems connected to a conventional grid. The main interest in such systems is on-site consumption of the produced energy, system hybridization, pooling of resources, and contribution to the environment protection. To ensure a better management of system energy, models have been used for determining the power that the constituting subsystems can deliver under specific weather conditions. Simulation is performed using MATLAB-SIMULINK. While, the economic and environmental study is performed using HOMER software. From an economic point of view, this allows to compare the financial constraints on each part of the system for the case of Adrar site which is located to the northern part of the south of Algeria. It also permits to optimally size and select the system presenting the best features on the basis of two parameters, that is, cost and effectiveness. From an environmental point of view, this study allows highlighting the role of renewable energy in reducing gas emissions related to greenhouse effects. In addition, through a set of sensitivity analysis, it is found that the wind speed has more effects on the environmental and economic performances of grid-connected hybrid (photovoltaic-wind) power systems.

A Technical, Economic, and Environmental Performance of Grid-Connected Hybrid (Photovoltaic-Wind Power System in Algeria

Directory of Open Access Journals (Sweden)

Djohra Saheb-Koussa

2013-01-01

Full Text Available This paper studies the technical, economic, and environmental analysis of wind and photovoltaic power systems connected to a conventional grid. The main interest in such systems is on-site consumption of the produced energy, system hybridization, pooling of resources, and contribution to the environment protection. To ensure a better management of system energy, models have been used for determining the power that the constituting subsystems can deliver under specific weather conditions. Simulation is performed using MATLAB-SIMULINK. While, the economic and environmental study is performed using HOMER software. From an economic point of view, this allows to compare the financial constraints on each part of the system for the case of Adrar site which is located to the northern part of the south of Algeria. It also permits to optimally size and select the system presenting the best features on the basis of two parameters, that is, cost and effectiveness. From an environmental point of view, this study allows highlighting the role of renewable energy in reducing gas emissions related to greenhouse effects. In addition, through a set of sensitivity analysis, it is found that the wind speed has more effects on the environmental and economic performances of grid-connected hybrid (photovoltaic-wind power systems.

Magnetization studies in high temperature and conventional superconductors

International Nuclear Information System (INIS)

Grover, A.K.; Chaddah, P.

1991-01-01

In this paper, the authors state the contemporary view of the physical basis of a celebrated phenomenological model for hard superconductors. The authors highlight the qualitative and general predictions of this model relevant to various magnetic measurements. The authors give prescriptions to correlate data of different experiments with the predictions of the model with the intention of extracting information on material parameters, like J c (H), pinning potential, etc. These prescriptions will be illustrated with the data on both conventional and HTSC superconductors. The correlation of these data with the predictions of the model underscores the similarity in behaviour between the two classes of hard superconductors

A real time S-parameter imaging system

International Nuclear Information System (INIS)

Naik, P.S.; Cheung, C.K.; Beling, C.D.; Fung, S.

2005-01-01

Obtaining a lateral S-parameter image scan from positrons implanted into semiconductor devices can be a helpful research tool both for localizing device structures and in diagnosing defect patterns that could help interpret function. S-parameter images can be obtained by electromagnetically rastering a variable energy positron beam of small spot size across the sample. Here we describe a general hardware and software architecture of relatively low cost that has recently been developed in our laboratory which allows the whole sub-surface S-parameter image of a sample or device to be obtained in real time. This system has the advantage over more conventional sequential scanning techniques of allowing the operator to terminate data collection once the quality of the image is deemed sufficient. As an example of the usefulness of this type of imaging architecture, S-parameter images of a representative sample are presented at two different position implantation energies. (author)

Limited parameter set IMRT for carcinoma breast

International Nuclear Information System (INIS)

Gopinath, M.; Sharma, Sanjiv; Vivek, T.R.; Suparna; Deka, Preeti; Manikandan; Giriraj

2008-01-01

Post operative radiotherapy after breast conservation surgery is an effective and widely accepted treatment modality in early stage breast cancer. The treatment is usually performed using two wedged tangential photon beams. The disadvantage of this technique is significant dose inhomogeneity as large as 15-20% in the superior and inferior regions of the breast due to lesser transmission thickness and in the medial and lateral aspect of the breast due to lower attenuation of lung tissue in the field. The aim of the study is to modify the conventional wedged tangential pair to achieve a more homogeneous dose distribution and a reduction in acute toxicity and improved cosmetic result. A comparative study is done between the conventional wedged technique and limited parameter set IMRT

Comprehensive probabilistic modelling of environmental emissions of engineered nanomaterials.

Science.gov (United States)

Sun, Tian Yin; Gottschalk, Fadri; Hungerbühler, Konrad; Nowack, Bernd

2014-02-01

Concerns about the environmental risks of engineered nanomaterials (ENM) are growing, however, currently very little is known about their concentrations in the environment. Here, we calculate the concentrations of five ENM (nano-TiO2, nano-ZnO, nano-Ag, CNT and fullerenes) in environmental and technical compartments using probabilistic material-flow modelling. We apply the newest data on ENM production volumes, their allocation to and subsequent release from different product categories, and their flows into and within those compartments. Further, we compare newly predicted ENM concentrations to estimates from 2009 and to corresponding measured concentrations of their conventional materials, e.g. TiO2, Zn and Ag. We show that the production volume and the compounds' inertness are crucial factors determining final concentrations. ENM production estimates are generally higher than a few years ago. In most cases, the environmental concentrations of corresponding conventional materials are between one and seven orders of magnitude higher than those for ENM. Copyright © 2013 Elsevier Ltd. All rights reserved.

Environmental Decision Making on Acid Mine Drainage Issues in South Africa: An Argument for the Precautionary Principle.

Science.gov (United States)

Morodi, T J; Mpofu, Charles

2017-06-28

This paper examines the issue of acid mine drainage in South Africa and environmental decision making processes that could be taken to mitigate the problem in the context of both conventional risk assessment and the precautionary principle. It is argued that conventional risk assessment protects the status quo and hence cannot be entirely relied upon as an effective tool to resolve environmental problems in the context of South Africa, a developing country with complex environmental health concerns. The complexity of the environmental issues is discussed from historical and political perspectives. An argument is subsequently made that the precautionary principle is an alternative tool, and its adoption can be used to empower local communities. This work, therefore, adds to new knowledge by problematising conventional risk assessment and proposing the framing of the acid mine drainage issues in a complex and contextual scenario of a developing country-South Africa.

Distributed Multi-Sensor Real-Time Building Environmental Parameters Monitoring System with Remote Data Access

Directory of Open Access Journals (Sweden)

Beinarts Ivars

2014-12-01

Full Text Available In this paper the advanced monitoring system of multiple environmental parameters is presented. The purpose of the system is a long-term estimation of energy efficiency and sustainability for the research test stands which are made of different building materials. Construction of test stands, and placement of main sensors are presented in the first chapter. The structure of data acquisition system includes a real-time interface with sensors and a data logger that allows to acquire and log data from all sensors with fixed rate. The data logging system provides a remote access to the processing of the acquired data and carries out periodical saving at a remote FTP server using an Internet connection. The system architecture and the usage of sensors are explained in the second chapter. In the third chapter implementation of the system, different interfaces of sensors and energy measuring devices are discussed and several examples of data logger program are presented. Each data logger is reading data from analog and digital channels. Measurements can be displayed directly on a screen using WEB access or using data from FTP server. Measurements and acquired data graphical results are presented in the fourth chapter in the selected diagrams. The benefits of the developed system are presented in the conclusion.

Capturing CO2: conventional versus ionic-liquid based technologies

International Nuclear Information System (INIS)

Privalova, E I; Mäki-Arvela, P; Murzin, Dmitry Yu; Mikkhola, J P

2012-01-01

Since CO 2 facilitates pipeline corrosion and contributes to a decrease of the calorific value of gaseous fuels, its removal has become an issue of significant economic importance. The present review discusses various types of traditional CO 2 capture technologies in terms of their efficiency, complexity in system design, costs and environmental impact. The focus is hereby not only on conventional approaches but also on emerging 'green' solvents such as ionic liquids. The suitability of different ionic liquids as gas separation solvents is discussed in the present review and a description on their synthesis and properties in terms of CO 2 capture is provided. The bibliography includes 136 references.

Nuclear liability: Joint protocol relating to the application of the Vienna Convention and the Paris Convention, 1988

International Nuclear Information System (INIS)

1989-10-01

The Joint Protocol Relating to the Application of the Vienna Convention and the Paris Convention was adopted by the Conference on the Relationship between the Paris Convention and the Vienna Convention, which met in Vienna, at the Headquarters of the International Atomic Energy Agency on 21 September 1988. The Joint Protocol establishes a link between the Paris Convention on Third Party Liability in the Field of Nuclear Energy of 1960 and the Vienna Convention on Civil Liability for Nuclear Damage of 1963. The Joint Protocol will extend to the States adhering to it the coverage of the two Conventions. It will also resolve potential conflicts of law, which could result from the simultaneous application of the two Conventions to the same nuclear accident. The Conference on the Relationship between the Paris Convention and the Vienna Convention was jointly organized by the International Atomic Energy Agency and the OECD Nuclear Energy Agency. This publication contains the text of the Final Act of the Conference in the six authentic languages, the Joint Protocol Relating to the Application of the Vienna Convention and the Paris Convention, also in the six authentic languages and an explanatory note, prepared by the IAEA and NEA Secretariats, providing background information on the content of the Joint Protocol

Gauge-invariant formulation of the S, T, and U parameters

International Nuclear Information System (INIS)

Degrassi, G.; Kniehl, B.A.; Sirlin, A.

1993-06-01

It is shown that the bosonic contributions to the S, T, and U parameters, defined in terms of conventional self-energies, are gauge dependent in the Standard Model (SM). Moreover, T and U are divergent unless a constraint is imposed among the gauge parameters. Implications of this result for renormalization schemes of the SM are discussed. A gauge-invariant formulation of S, T, and U is proposed in the pinch-technique framework. The modified S, T, and U parameters provide a gauge-invariant parametrization of leading electroweak radiative corrections in the SM and some of its extensions. (orig.)

Effective material parameter retrieval of anisotropic elastic metamaterials with inherent nonlocality

Science.gov (United States)

Lee, Hyung Jin; Lee, Heung Son; Ma, Pyung Sik; Kim, Yoon Young

2016-09-01

In this paper, the scattering (S-) parameter retrieval method is presented specifically for anisotropic elastic metamaterials; so far, no retrieval has been accomplished when elastic metamaterials exhibit fully anisotropic behavior. Complex constitutive property and intrinsic scattering behavior of elastic metamaterials make their characterization far more complicated than that for acoustic and electromagnetic metamaterials. In particular, elastic metamaterials generally exhibit anisotropic scattering behavior due to higher scattering modes associated with shear deformation. They also exhibit nonlocal responses to some degrees, which originate from strong multiple scattering interactions even in the long wavelength limit. Accordingly, the conventional S-parameter retrieval methods cannot be directly used for elastic metamaterials, because they determine only the diagonal components in effective tensor property. Also, the conventional methods simply use the analytic inversion formulae for the material characterization so that inherent nonlocality cannot be taken into account. To establish a retrieval method applicable to anisotropic elastic metamaterials, we propose an alternative S-parameter method to deal with full anisotropy of elastic metamaterials. To retrieve the whole effective anisotropic parameter, we utilize not only normal but also oblique wave incidences. For the retrieval, we first retrieve the ratio of the effective stiffness tensor to effective density and then determine the effective density. The proposed retrieval method is validated by characterizing the effective material parameters of various types of non-resonant anisotropic metamaterials. It is found that the whole effective parameters are retrieved consistently regardless of used retrieval conditions in spite of inherent nonlocality.

Parameters extraction for perovskite solar cells based on Lambert W-function

Directory of Open Access Journals (Sweden)

Ge Junyu

2016-01-01

Full Text Available The behaviors of the solar cells are decided by the device parameters. Thus, it is necessary to extract these parameters to achieve the optimal working condition. Because the five-parameter model of solar cells has the implicit equation of current-voltage relationship, it is difficult to obtain the parameters with conventional methods. In this work, an optimized method is presented to extract device parameters from the actual test data of photovoltaic cell. Based on Lambert W-function, explicit formulation of the model can be deduced. The proposed technique takes suitable method of selecting sample points, which are used to calculate the values of the model parameters. By comparing with the Quasi-Newton method, the results verify accuracy and reliability of this method.

The environmental impacts of the nuclear fuel cycle

International Nuclear Information System (INIS)

Hamard, J.

1975-01-01

A survey about the environmental pollution and the population exposure caused by the nuclear fuel cycle is set up. Proceeding from the environmental changes caused by the construction of plants, the author shows the hazards of the operation of the plants. The fuel cycle beginning with the mining of nuclear fuels and reaching to their reprocessing, the environmental pollution by radionuclides and the population exposure resulting from this are outlined. After indicating the advantages of the concentration of nuclear plants, the author shows comparatively the hazards caused by conventional energy sources. (ORU) [de

Sustainability evaluation of Sicily's lemon and orange production: an energy, economic and environmental analysis.

Science.gov (United States)

Pergola, M; D'Amico, M; Celano, G; Palese, A M; Scuderi, A; Di Vita, G; Pappalardo, G; Inglese, P

2013-10-15

The island of Sicily has a long standing tradition in citrus growing. We evaluated the sustainability of orange and lemon orchards, under organic and conventional farming, using an energy, environmental and economic analysis of the whole production cycle by using a life cycle assessment approach. These orchard systems differ only in terms of a few of the inputs used and the duration of the various agricultural operations. The quantity of energy consumption in the production cycle was calculated by multiplying the quantity of inputs used by the energy conversion factors drawn from the literature. The production costs were calculated considering all internal costs, including equipment, materials, wages, and costs of working capital. The performance of the two systems (organic and conventional), was compared over a period of fifty years. The results, based on unit surface area (ha) production, prove the stronger sustainability of the organic over the conventional system, both in terms of energy consumption and environmental impact, especially for lemons. The sustainability of organic systems is mainly due to the use of environmentally friendly crop inputs (fertilizers, not use of synthetic products, etc.). In terms of production costs, the conventional management systems were more expensive, and both systems were heavily influenced by wages. In terms of kg of final product, the organic production system showed better environmental and energy performances. Copyright © 2013 Elsevier Ltd. All rights reserved.

Environmental surveillance at Hanford for CY-1975 data

International Nuclear Information System (INIS)

Blumer, P.J.; Fix, J.J.; Speer, D.R.

1976-04-01

This document contains detailed data collected by the Hanford Environmental Surveillance program during 1975. Environmental Surveillance responsibilities at Hanford are divided between Hanford Environmental Health Foundation (HEHF) and Battelle-Northwest (BNW). HEHF is responsible for measuring all nonradiological air quality and sanitary water parameters of interest. BNW is responsible for measuring radiological parameters in all environmental media of significance and for measuring both radiological and nonradiological parameters of Columbia River water and ground water. A brief description of the method and location of sample collection during 1975 is included. Data are tabulated on the content of specific radionuclides in surface air. Columbia River water, drinking water, ground water, foods, fish, and wild animals. Data are also included on content of NO 2 and SO 2 in air, nitrates in Columbia River water, ground water, and drinking water, and water quality of samples of Columbia River water collected at various sampling locations

Norwegian implementation of the Climate Convention; Norsk gjennomfoering av Klimakonvensjonen

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

The international climate cooperation has become one of the most important results of the UN conference on environment and development that took place in Rio in 1992. This report examines whether Norway has fulfilled the goal of the Climate Convention. Norway played an important role in the negotiations of the Climate Convention, on issues of joint implementation, on the need for a just sharing of burden and on the goal of cost effectiveness. Since the end of the 1980s, Norway has implemented a series of climate measures, although probably not all directly due to the Climate Convention. A carbon dioxide tax was introduced already in 1991. The effects of the measures are still uncertain, but they appear to be insufficient. Norwegian gas emissions are increasing. The increased oil- and gas activities in the North Sea and plans for a gas power station in the western part of Norway make it very difficult to attain the goal of stabilising the CO{sub 2} emissions on the 1989 level within the year 2000. The oil- and energy policy of the Norwegian government is being criticised by the opposition and by the environmental movement. It seems that it will become difficult for Norway to assume a leading role in international climate policy that is compatible with the same country`s business interests in the energy sector. 29 refs., 3 figs.

studies on the correlation of some aggregate parameters in the ...

African Journals Online (AJOL)

BARTH EKWUEME

simulations for problem solving and forecasting environmental conditions .... METHODS. Parameters: The water quality parameters examined were, Turbidity, Total Dissolved Solids (TDS),. Chemical Oxygen Demand (COD), 5-day Biochemical. Oxygen Demand ..... Vogel's Textbook of Quantitative. Chemical Analysis 6th ed ...

Sea surface stability parameters

International Nuclear Information System (INIS)

Weber, A.H.; Suich, J.E.

1978-01-01

A number of studies dealing with climatology of the Northwest Atlantic Ocean have been published in the last ten years. These published studies have dealt with directly measured meteorological parameters, e.g., wind speed, temperature, etc. This information has been useful because of the increased focus on the near coastal zone where man's activities are increasing in magnitude and scope, e.g., offshore power plants, petroleum production, and the subsequent environmental impacts of these activities. Atmospheric transport of passive or nonpassive material is significantly influenced by the turbulence structure of the atmosphere in the region of the atmosphere-ocean interface. This research entails identification of the suitability of standard atmospheric stability parameters which can be used to determine turbulence structure; the calculation of these parameters for the near-shore and continental shelf regions of the U.S. east coast from Cape Hatteras to Miami, Florida; and the preparation of a climatology of these parameters. In addition, a climatology for average surface stress for the same geographical region is being prepared

Analysis of animal experiments of radiation dependent tumor regression in relation to different parameters

International Nuclear Information System (INIS)

Heinzel, F.; Mueller-Duysing, W.; Blattman, H.; Bacesa, L.; Rao, K.R.; Mindek, G.

In order to be able to test the therapeutic value of the pions in comparison with conventional X-rays, analyses of animal experiments with induced tumors, transplantation tumors, and comparative cellular kinetic studies of tissue cultures will be performed. So that differences in radiation effect and a possible superiority of the pion therapy be objectively acknowledged, the reaction systems to be tested must be as homogenous as possible. For this purpose, the dependence of the radiation related regression on various parameters such as sex, age of hosts, environmental factors radiation conditions (intensity, fractionation, and so on), tumor size, and so on, must be investigated on sterile animals in a sterile environment. The experiments should be conducted under conditions as close as possible to clinical ones. For comparison, the reaction of normal tissue (in vitro and in vivo) and of malignant cells in short-time tissue cultures will be analysed. Cellular kinetics, alteration of chromosomes and metabolic activity of the cells will be studied

ROLE OF LOCAL BODIES IN IMPLEMENTING THE UN CONVENTION TO COMBAT DESERTIFICATION IN PAKISTAN

Directory of Open Access Journals (Sweden)

Farooq Ahmad

2005-05-01

Full Text Available Pakistan is a tropical country with vast semi-arid and arid tracks of land spread over 68million hectares with the population of 145.5 million people in 2002 as against 130.58 millionin 1998 showing an average growth rate of 2.1 percent. All of its provinces possess largeshare of land with valuable natural resources, which are being degraded at very high rate i.e.,Punjab 119,310 Km2, Sindh 134,896 Km2, Baluchistan 149,467 Km2 and its proportion isincreasing because of over-exploitation of under-developed meadows beyond quickrehabilitation (Ahmad, 1999. Disturbance of the natural equilibrium ultimately results ineconomical losses, social problems and general moral decline of the society. Degradation ofnatural and agricultural ecosystem has led to a deep environmental crisis.The government is indeed, striving hard for the development of the country but thisdevelopment will be meaningless unless we first resolve the basic and fundamental problemscaused due to environmental degradation, which threaten the survival of the growingpopulation of the country.Government of Pakistan has adopted the Convention on April 22, 1997. The former federalminister for food and agriculture Syeda Abida Hussain said that concerted efforts at grassrootslevel are essential to combat the environmental problems. She said, “The Convention comesas a ray of hope for more than one billion people around the world whose lives are threatenedby the adverse impacts of drought and desertification” (Associated Press of Pakistan, 1997.

Some environmental impacts associated with project Rio Blanco

International Nuclear Information System (INIS)

Alldredge, A.W.; Whicker, F.W.; Hanson, W.C.

1976-01-01

Project Rio Blanco, an experiment involving deep underground detonation of three 30-kiloton nuclear explosives designed to stimulate natural gas flow in geologic formations of low permeability, was conducted in western Colorado on 17 May 1973. Environmental impacts associated with this experiment were divided into three categories: radiation, ground motion, and conventional physical activities. The objective of observations made at Rio Blanco was to qualitatively and, where possible, quantitatively ascertain environmental impacts associated with the project. Observations indicated that ground motion and conventional activities appeared to cause the greatest impacts. Ground motion impacts were most severe within 2.4 km of the emplacement well (EW) and were predominantly associated with steep ravine and stream banks and rocky cliffs. Following the detonation, flow and turbidity had increased in a small stream adjacent to the EW. Animals receiving deleterious impacts were those associated with stream banks, cliffs and burrows. No mortality or injury was observed in any large animals. Based on overall results it appears important to give adequate attention to environmental effects resulting from nuclear fracturing experiments

Revised Paris and Vienna Nuclear Liability Conventions - Challenges for Nuclear Insurers

International Nuclear Information System (INIS)

Tetley, M.

2006-01-01

The revisions recently implemented to both the Vienna and Paris nuclear liability Conventions are intended to widen significantly the amount and scope of compensation payable in the event of a nuclear accident. Whilst this is a laudable objective, the final extent of the revisions leaves nuclear site operators and their insurers with greater uncertainty as a result of the wider and unquantifiable nature of some aspects of the revised nuclear damage definition, in particular where reference is made to environmental reinstatement and extended prescription periods. Incorporating broader definitions in the Convention revisions will therefore leave gaps in the insurance cover where insurers are unable to insure the new, wider scope of cover. If no insurance is available, then the liability for the revised scope of cover must fall upon either the operator or the national Government. This presentation will give an overview of where and why the major gaps in nuclear liability insurance cover will occur in the revised Conventions; it will also examine the problems in defining the revised scope of cover and will look at where these unquantifiable risks should now reside, to ensure there is equity between the liabilities imposed on the nuclear industry and those imposed on other industrial sectors. (author)

Impact Assessment and Environmental Evaluation of Various Ammonia Production Processes

Science.gov (United States)

Bicer, Yusuf; Dincer, Ibrahim; Vezina, Greg; Raso, Frank

2017-05-01

In the current study, conventional resources-based ammonia generation routes are comparatively studied through a comprehensive life cycle assessment. The selected ammonia generation options range from mostly used steam methane reforming to partial oxidation of heavy oil. The chosen ammonia synthesis process is the most common commercially available Haber-Bosch process. The essential energy input for the methods are used from various conventional resources such as coal, nuclear, natural gas and heavy oil. Using the life cycle assessment methodology, the environmental impacts of selected methods are identified and quantified from cradle to gate. The life cycle assessment outcomes of the conventional resources based ammonia production routes show that nuclear electrolysis-based ammonia generation method yields the lowest global warming and climate change impacts while the coal-based electrolysis options bring higher environmental problems. The calculated greenhouse gas emission from nuclear-based electrolysis is 0.48 kg CO2 equivalent while it is 13.6 kg CO2 per kg of ammonia for coal-based electrolysis method.

Influence of environmental parameters and of their interactions on the release of metal(loid)s from a construction material in hydraulic engineering

International Nuclear Information System (INIS)

Schmukat, A.; Duester, L.; Goryunova, E.; Ecker, D.; Heininger, P.; Ternes, T.A.

2016-01-01

Highlights: • DoE supported multi-factorial study on the metal(loid) release from copper slag. • Interactions of four parameters were studied and weighted. • An effective separation method between slag and sediment was established. • The metal(loid) partitioning between sediment, slag and eluent is described. • The knowledge on the potential environmental impact of copper slag is increased. - Abstract: Besides the leaching behaviour of a construction material under standardised test-specific conditions with laboratory water, for some construction materials it is advisable to test their environmental behaviour also under close to end use conditions. The envisaged end use combined with the product characteristics (e.g. mineral phases) is decisive for the choice of environmental factors that may change the release of substance that potentially cause adverse environmental effects (e.g. fertilisation or ecotoxicity). At the moment an experimental link is missing between mono-factorial standardised test systems and non standardised complex incubation experiments such as mesocosms which are closer to environmental conditions. Multi-factorial batch experiments may have the potential to close the gap. To verify this, batch experiments with copper slag were performed which is used as armour stones in hydraulic engineering. Design of experiments (DoE) was applied to evaluate the impact of pH, ionic strength, temperature and sediment content on the release of As, Cu, Mo, Ni, Pb, Sb and Zn. The study shows that release and sediment-eluent partitioning of metal(loid)s are impacted by interactions between the studied factors. Under the prevalent test conditions sediment acts as a sink enhancing most strongly the release of elements from the material.

Influence of environmental parameters and of their interactions on the release of metal(loid)s from a construction material in hydraulic engineering

Energy Technology Data Exchange (ETDEWEB)

Schmukat, A., E-mail: schmukat@harzwasserwerke.de [Harzwasserwerke GmbH, Zur Granetalsperre 8, 38685 Langelsheim (Germany); Federal Institute of Hydrology, Department of Aquatic Chemistry, Am Mainzer Tor 1, 56068 Koblenz (Germany); Duester, L. [Federal Institute of Hydrology, Department of Aquatic Chemistry, Am Mainzer Tor 1, 56068 Koblenz (Germany); Goryunova, E. [Federal Institute of Hydrology, Department of Aquatic Chemistry, Am Mainzer Tor 1, 56068 Koblenz (Germany); KAPP-Chemie GmbH & Co. KG, Industriestr. 2-4, 56357 Miehlen (Germany); Ecker, D.; Heininger, P.; Ternes, T.A. [Federal Institute of Hydrology, Department of Aquatic Chemistry, Am Mainzer Tor 1, 56068 Koblenz (Germany)

2016-03-05

Highlights: • DoE supported multi-factorial study on the metal(loid) release from copper slag. • Interactions of four parameters were studied and weighted. • An effective separation method between slag and sediment was established. • The metal(loid) partitioning between sediment, slag and eluent is described. • The knowledge on the potential environmental impact of copper slag is increased. - Abstract: Besides the leaching behaviour of a construction material under standardised test-specific conditions with laboratory water, for some construction materials it is advisable to test their environmental behaviour also under close to end use conditions. The envisaged end use combined with the product characteristics (e.g. mineral phases) is decisive for the choice of environmental factors that may change the release of substance that potentially cause adverse environmental effects (e.g. fertilisation or ecotoxicity). At the moment an experimental link is missing between mono-factorial standardised test systems and non standardised complex incubation experiments such as mesocosms which are closer to environmental conditions. Multi-factorial batch experiments may have the potential to close the gap. To verify this, batch experiments with copper slag were performed which is used as armour stones in hydraulic engineering. Design of experiments (DoE) was applied to evaluate the impact of pH, ionic strength, temperature and sediment content on the release of As, Cu, Mo, Ni, Pb, Sb and Zn. The study shows that release and sediment-eluent partitioning of metal(loid)s are impacted by interactions between the studied factors. Under the prevalent test conditions sediment acts as a sink enhancing most strongly the release of elements from the material.

Monitoring commercial conventional facilities control with the APS control system: The Metasys-to-EPICS interface

International Nuclear Information System (INIS)

Nawrocki, G.J.; Seaver, C.L.; Kowalkowski, J.B.

1995-01-01

As controls needs at the Advanced Photon Source matured from an installation phase to an operational phase, the need to monitor the existing conventional facilities control system with the EPICS-based accelerator control system was realized. This existing conventional facilities control network is based on a proprietary system from Johnson Controls called Metasys. Initially read-only monitoring of the Metasys parameters will be provided; however, the ability for possible future expansion to full control is available. This paper describes a method of using commercially available hardware and existing EPICS software as a bridge between the Metasys and EPICS control systems

Microwave and conventional preparation of Zinc borate glass: Eu3+ ion as luminescent probe

International Nuclear Information System (INIS)

Mandal, Ashis K.; Balaji, S.; Sen, Ranjan

2014-01-01

Highlights: • IR transparent Zinc borate glass is prepared using microwave heating. • Glass transition temperature of microwave melted glass is found higher than that of glass prepared in conventional melting. • Low OH concentration in glass can be prepared in microwave heating. • We report higher reduction of Eu 3+ to Eu 2+ in microwave processing of Zinc borate glass. - Abstract: Transparent Zinc borate glass is melted using microwave energy as an alternative heating route to conventional resistive heating. A comparative study of the properties of the glasses prepared by both the methods is conducted by adopting X-ray diffraction (XRD), Differential scanning calorimetry (DSC), UV–VIS–NIR spectroscopy, Fourier transform infrared (FTIR) spectroscopy, Refractive Indices (RI). Amorphous nature of samples is confirmed by X-ray diffraction study. Glass transition temperature (T g ) of microwave melted glass is found ∼7–9 °C higher than that of glass prepared in conventional melting. OH content is found less than 250 ppm in microwave melted glass whereas it is above 330 ppm in conventional melted glasses. Photoluminescence study of Eu 2 O 3 doped glass prepared in microwave heating indicates higher reduction of Eu 3+ → Eu 2+ than the glass melted in conventional route. Thus, microwave processing can be an alternative energy efficient, time saving, environmental friendly glass preparation method

Decreased functional diversity and biological pest control in conventional compared to organic crop fields.

Science.gov (United States)

Krauss, Jochen; Gallenberger, Iris; Steffan-Dewenter, Ingolf

2011-01-01

Organic farming is one of the most successful agri-environmental schemes, as humans benefit from high quality food, farmers from higher prices for their products and it often successfully protects biodiversity. However there is little knowledge if organic farming also increases ecosystem services like pest control. We assessed 30 triticale fields (15 organic vs. 15 conventional) and recorded vascular plants, pollinators, aphids and their predators. Further, five conventional fields which were treated with insecticides were compared with 10 non-treated conventional fields. Organic fields had five times higher plant species richness and about twenty times higher pollinator species richness compared to conventional fields. Abundance of pollinators was even more than one-hundred times higher on organic fields. In contrast, the abundance of cereal aphids was five times lower in organic fields, while predator abundances were three times higher and predator-prey ratios twenty times higher in organic fields, indicating a significantly higher potential for biological pest control in organic fields. Insecticide treatment in conventional fields had only a short-term effect on aphid densities while later in the season aphid abundances were even higher and predator abundances lower in treated compared to untreated conventional fields. Our data indicate that insecticide treatment kept aphid predators at low abundances throughout the season, thereby significantly reducing top-down control of aphid populations. Plant and pollinator species richness as well as predator abundances and predator-prey ratios were higher at field edges compared to field centres, highlighting the importance of field edges for ecosystem services. In conclusion organic farming increases biodiversity, including important functional groups like plants, pollinators and predators which enhance natural pest control. Preventative insecticide application in conventional fields has only short-term effects on aphid

Occupant comfort and health in green and conventional university buildings.

Science.gov (United States)

Hedge, A; Miller, L; Dorsey, J A

2014-01-01

Green building standards are significantly impacting modern construction practices. The resulting structures are more energy efficient, but their impact on occupant health has not been widely studied. To investigate a range of indoor environment and ergonomic issues in green buildings. Retrospective post-occupancy evaluation survey of 319 occupants in two Leadership in Energy and Environmental Design (LEED) certified buildings and one conventional building on a Canadian University campus. Results show that working in the LEED buildings was a generally positive experience for their health, performance, and satisfaction. However, the LEED buildings did not always receive the highest ratings for environmental conditions or for health and productivity. Respondents indicated a range of concerns with thermal conditions, office lighting, noise and their overall workstation designs and these were not always better in the green buildings. These results highlight the need for better integration of ergonomic design into green buildings and into the LEED rating system, and these implications are discussed.

Differences in conventional cardiovascular risk factors in two ethnic groups in India.

Science.gov (United States)

Garg, Priyanka Rani; Kabita, Salam; Singh, Huidrom Suraj; Saraswathy, Kallur Nava; Sinha, Ekata; Kalla, Aloke Kumar; Chongtham, Dhanaraj Singh

2012-01-01

Studies have been carried out at national and international levels to assess ethnic variations in the prevalence of cardiovascular diseases and their risk factors. However, ethnic variations in the contribution of various risk factors to complex diseases have been scarcely studied. Our study examined such variations in two ethnic groups in India, namely, Meiteis of Manipur (northeast India) and Aggarwals of Delhi (north India). Through random sampling, we selected 635 participants from the Meitei community and 181 Aggarwals from the Aggarwal Dharmarth Hospital, Delhi. Patients with coronary artery disease (CAD) and hypertension were identified based on their recent medical diagnostic history. Anthropometric parameters such as height, weight, waist and hip circumferences along with physiological parameters (blood pressures, both systolic and diastolic) and biochemical parameter (lipid profile) were measured for all study participants. Patient parameters were available from the medical reports recorded when patients were first diagnosed. Among CAD individuals, the Aggarwals showed higher mean values of weight, body mass index (BMI), systolic blood pressure (SBP), diastolic blood pressure (DBP), total cholesterol (TC), triglyceride (TC), low density lipoprotein (LDL), and very low density lipoprotein (VLDL) but had lower high density lipoprotein (HDL) levels than the Meiteis. The same trend for weight, BMI and lipid parameters could be seen among hypertensive individuals. In step-wise regression analysis, SBP, LDL and TG were found to significantly contribute to the risk for CAD in the Aggarwals; whereas in the Meiteis, SBP, VLDL, HDL, TC and LDL were found to significantly contribute to the risk for CAD. In hypertensive Aggarwal participants, SBP, DBP and waist-to-hip ratio were significant contributors for hypertension; whereas SBP, DBP, and height contributed significantly to risk for hypertension among the Meiteis. We found marked differences in conventional risk

Dependence of nuclear moments of inertia on the triaxial parameter

International Nuclear Information System (INIS)

Helgesson, J.; Hamamoto, Ikuko

1989-01-01

The dependence of nuclear moments of inertia on the triaxial parameter (γ-variable) is investigated including both the Belyaev term and the Migdal term. The obtained dependence is compared with that of hydrodynamical moments of inertia and other moments of inertia used conventionally. (orig.)

Environmental parameters affecting the structure of leaf-litter frog (Amphibia: Anura communities in tropical forests: a case study from an Atlantic Rainforest area in southeastern Brazil

Directory of Open Access Journals (Sweden)

Carla C. Siqueira

2014-04-01

Full Text Available Despite a recent increase of information on leaf litter frog communities from Atlantic rainforests, few studies have analyzed the relationship between environmental parameters and community structure of these animals. We analyzed the effects of some environmental factors on a leaf litter frog community at an Atlantic Rainforest area in southeastern Brazil. Data collection lasted ten consecutive days in January 2010, at elevations ranging between 300 and 520 m above sea level. We established 50 quadrats of 5 x 5 m on the forest floor, totaling 1,250 m² of sampled area, and recorded the mean leaf-litter depth and the number of trees within the plot, as well as altitude. We found 307 individuals belonging to ten frog species within the plots. The overall density of leaf-litter frogs estimated from the plots was 24.6 ind/100m², with Euparkerella brasiliensis (Parker, 1926, Ischnocnema guentheri (Steindachner, 1864, Ischnocnema parva (Girard, 1853 and Haddadus binotatus (Spix, 1824 presenting the highest estimated densities. Among the environmental variables analyzed, only altitude influenced the parameters of anuran community. Our results indicate that the study area has a very high density of forest floor leaf litter frogs at altitudes of 300-500 m. Future estimates of litter frog density might benefit from taking the local altitudinal variation into consideration. Neglecting such variation might result in underestimated/overestimated values if they are extrapolated to the whole area.

Conventional radiation-biological dosimetry using frequencies of unstable chromosome aberrations

International Nuclear Information System (INIS)

Ramalho, Adriana T.; Costa, Maria Lucia P.; Oliveira, Monica S.

1998-01-01

Frequency of chromosome aberrations detected by conventional cytogenetics is a very useful parameter in biological radiodosimetry. It can be used for estimating absorbed doses in individuals working with radioactive sources and individuals accidentally exposed to radiation. In the first case subjects wear physical dosimeters as a routine safety habit. The laboratory at the Institute of Radioprotection and Dosimetry (IRD, Brazil) has been using conventional cytogenetic analysis to complement data obtained by physical dosimetry since 1983. Until now, more than one hundred cases were investigated where individual physical dosimeters detected occupational exposure (above the safety limits allowed). In total, only 34% of these cases were confirmed by conventional cytogenetic dosimetry. Also, conventional cytogenetic analysis following the radiation accident of Goiania (Brazil) in 1987 have been used. Peripheral lymphocytes from 129 exposed or potentially exposed individuals were analyzed for the frequencies of unstable chromosomal aberrations (dicentrics, centric rings and acentrics fragments) to estimate absorbed radiation doses. During the emergency period, doses were estimated to help immediate medical treatment using in vitro calibration curves produced before the accident. Later on, doses were assessed once more using new in vitro calibration curves. A drawback of this technique is that unstable aberrations are lost after exposure. To investigate the mean lifespan of lymphocytes containing dicentric and ring aberrations, we have followed 15 victims of the Goiania accident over all these years. Results suggest that the disappearance of unstable aberrations is dose-dependent. This could explain the variation in the results found among studies in this field

Conventional radiation-biological dosimetry using frequencies of unstable chromosome aberrations

Energy Technology Data Exchange (ETDEWEB)

Ramalho, Adriana T.; Costa, Maria Lucia P.; Oliveira, Monica S. [Institute of Radioprotection and Dosimetry (IRD), National Commission of Nuclear Energy (CNEN), Av. Salvador Allende, Cx. P. 37750, Rio de Janeiro 22.780-160 (Brazil)

1998-08-03

Frequency of chromosome aberrations detected by conventional cytogenetics is a very useful parameter in biological radiodosimetry. It can be used for estimating absorbed doses in individuals working with radioactive sources and individuals accidentally exposed to radiation. In the first case subjects wear physical dosimeters as a routine safety habit. The laboratory at the Institute of Radioprotection and Dosimetry (IRD, Brazil) has been using conventional cytogenetic analysis to complement data obtained by physical dosimetry since 1983. Until now, more than one hundred cases were investigated where individual physical dosimeters detected occupational exposure (above the safety limits allowed). In total, only 34% of these cases were confirmed by conventional cytogenetic dosimetry. Also, conventional cytogenetic analysis following the radiation accident of Goiania (Brazil) in 1987 have been used. Peripheral lymphocytes from 129 exposed or potentially exposed individuals were analyzed for the frequencies of unstable chromosomal aberrations (dicentrics, centric rings and acentrics fragments) to estimate absorbed radiation doses. During the emergency period, doses were estimated to help immediate medical treatment using in vitro calibration curves produced before the accident. Later on, doses were assessed once more using new in vitro calibration curves. A drawback of this technique is that unstable aberrations are lost after exposure. To investigate the mean lifespan of lymphocytes containing dicentric and ring aberrations, we have followed 15 victims of the Goiania accident over all these years. Results suggest that the disappearance of unstable aberrations is dose-dependent. This could explain the variation in the results found among studies in this field

Generic models and parameters for assessing the environmental transfer of radionuclides from routine releases

International Nuclear Information System (INIS)

1982-01-01

This report is addressed to national regulatory bodies and technical and administrative personnel responsible for performing environmental impact analyses, in particular for generic assessments of doses to most exposed individuals from routine releases of radioactive effluents to atmospheric and aquatic environments. The concern of society in general for the quality of the environment and the realization that all human activities have some environmental effect, in which actions and reactions are coupled in a complex but predictable manner, have led to the development of a procedure for environmental impact analysis. This procedure is a predictive one, which tries to forecast probable environmental effects before some action, such as the construction and operation of a nuclear power station, is decided upon. The method of prediction is by the application of models that attempt to describe the environmental processes in mathematical terms in order to produce a quantitative result which can be used in the decision-making process

Identifiability of parameters and behaviour of the MCMC chains: a case study using the reaction norm model

DEFF Research Database (Denmark)

Shariati, M M; Korsgaard, I R; Sorensen, D

2009-01-01

model with unknown covariates (RNUC) is a model in which unknown environmental effects can be inferred jointly with the remaining parameters. The problem of identifiability of parameters at the level of the likelihood and the associated behaviour of MCMC chains were discussed using the RNUC...... as fixed and there are other fixed factors in the model, the contrasts involving environmental effects, the variance of environmental sensitivities (genetic slopes) and the residual variance are the only identifiable parameters. These different identifiability scenarios were generated by changing...... as an example. It was shown theoretically that when environmental effects (covariates) are considered as random effects, estimable functions of the fixed effects, (co)variance components and genetic effects are identifiable as well as the environmental effects. When the environmental effects are treated...

Civil legal responsibility for environmental pollution

Directory of Open Access Journals (Sweden)

Pajtić Bojan L.

2015-01-01

Full Text Available Serbia's EU accession process has actualised the need to harmonise our legislation with the common legal regulations of the European community of nations. The accelerated economic growth produces environmental challenges associated with harmful emissions. This paper gives an account of international declarations, conventions, directives and other state and civil society instruments of legal protection against the environmental damage. A special focus is placed on our positive legislation and enforcement of legal regulations in ensuring the civil legal responsibility, i.e. prevention of the occurrence of damage and indemnification for the damage caused.

ESD and the Rio Conventions

Science.gov (United States)

Sarabhai, Kartikeya V.; Ravindranath, Shailaja; Schwarz, Rixa; Vyas, Purvi

2012-01-01

Chapter 36 of Agenda 21, a key document of the 1992 Earth Summit, emphasised reorienting education towards sustainable development. While two of the Rio conventions, the Convention on Biological Diversity (CBD) and the United Nations Framework Convention on Climate Change (UNFCCC), developed communication, education and public awareness (CEPA)…

Environmental cost of using poor decision metrics to prioritize environmental projects.

Science.gov (United States)

Pannell, David J; Gibson, Fiona L

2016-04-01

Conservation decision makers commonly use project-scoring metrics that are inconsistent with theory on optimal ranking of projects. As a result, there may often be a loss of environmental benefits. We estimated the magnitudes of these losses for various metrics that deviate from theory in ways that are common in practice. These metrics included cases where relevant variables were omitted from the benefits metric, project costs were omitted, and benefits were calculated using a faulty functional form. We estimated distributions of parameters from 129 environmental projects from Australia, New Zealand, and Italy for which detailed analyses had been completed previously. The cost of using poor prioritization metrics (in terms of lost environmental values) was often high--up to 80% in the scenarios we examined. The cost in percentage terms was greater when the budget was smaller. The most costly errors were omitting information about environmental values (up to 31% loss of environmental values), omitting project costs (up to 35% loss), omitting the effectiveness of management actions (up to 9% loss), and using a weighted-additive decision metric for variables that should be multiplied (up to 23% loss). The latter 3 are errors that occur commonly in real-world decision metrics, in combination often reducing potential benefits from conservation investments by 30-50%. Uncertainty about parameter values also reduced the benefits from investments in conservation projects but often not by as much as faulty prioritization metrics. © 2016 Society for Conservation Biology.

Conventional and Non-Conventional Yeasts in Beer Production

Directory of Open Access Journals (Sweden)

Angela Capece

2018-06-01

Full Text Available The quality of beer relies on the activity of fermenting yeasts, not only for their good fermentation yield-efficiency, but also for their influence on beer aroma, since most of the aromatic compounds are intermediate metabolites and by-products of yeast metabolism. Beer production is a traditional process, in which Saccharomyces is the sole microbial component, and any deviation is considered a flaw. However, nowadays the brewing sector is faced with an increasing demand for innovative products, and it is diffusing the use of uncharacterized autochthonous starter cultures, spontaneous fermentation, or non-Saccharomyces starters, which leads to the production of distinctive and unusual products. Attempts to obtain products with more complex sensory characteristics have led one to prospect for non-conventional yeasts, i.e., non-Saccharomyces yeasts. These generally are characterized by low fermentation yields and are more sensitive to ethanol stress, but they provide a distinctive aroma and flavor. Furthermore, non-conventional yeasts can be used for the production of low-alcohol/non-alcoholic and light beers. This review aims to present the main findings about the role of traditional and non-conventional yeasts in brewing, demonstrating the wide choice of available yeasts, which represents a new biotechnological approach with which to target the characteristics of beer and to produce different or even totally new beer styles.

Local and nonlocal order parameters in the Kitaev chain

Science.gov (United States)

Chitov, Gennady Y.

2018-02-01

We have calculated order parameters for the phases of the Kitaev chain with interaction and dimerization at a special symmetric point applying the Jordan-Wigner and other duality transformations. We use string order parameters (SOPs) defined via the correlation functions of the Majorana string operators. The SOPs are mapped onto the local order parameters of some dual Hamiltonians and easily calculated. We have shown that the phase diagram of the interacting dimerized chain comprises the phases with the conventional local order as well as the phases with nonlocal SOPs. From the results for the critical indices, we infer the two-dimensional Ising universality class of criticality at the particular symmetry point where the model is exactly solvable.

Non-conventional yeast species for lowering ethanol content of wines

Directory of Open Access Journals (Sweden)

Maurizio eCiani

2016-05-01

Full Text Available Rising sugar content in grape must, and the concomitant increase in alcohol levels in wine, are some of the main challenges affecting the winemaking industry nowadays. Among the several alternative solutions currently under study, the use of non-conventional yeasts during fermentation holds good promise for contributing to relieve this problem. Non-Saccharomyces wine yeast species comprise a high number or species, so encompassing a wider physiological diversity than Saccharomyces cerevisiae. Indeed, the current oenological interest of these microorganisms was initially triggered by their potential positive contribution to the sensorial complexity of quality wines, through the production of aroma and other sensory-active compounds. This diversity also involves ethanol yield on sugar, one of the most invariant metabolic traits of S. cerevisiae. This review gathers recent research on non-Saccharomyces yeasts, aiming to produce wines with lower alcohol content than those from pure Saccharomyces starters. Critical aspects discussed include the selection of suitable yeast strains (considering there is a noticeable intra-species diversity for ethanol yield, as shown for other fermentation traits, identification of key environmental parameters influencing ethanol yields (including the use of controlled oxygenation conditions, and managing mixed fermentations, by either the sequential or simultaneous inoculation of S. cerevisiae and non-Saccharomyces starter cultures. The feasibility, at the industrial level, of using non-Saccharomyces yeasts for reducing alcohol levels in wine will require an improved understanding of the metabolism of these alternative yeast species, as well as of the interactions between different yeast starters during the fermentation of grape must.

Non-conventional Yeast Species for Lowering Ethanol Content of Wines

Science.gov (United States)

Ciani, Maurizio; Morales, Pilar; Comitini, Francesca; Tronchoni, Jordi; Canonico, Laura; Curiel, José A.; Oro, Lucia; Rodrigues, Alda J.; Gonzalez, Ramon

2016-01-01

Rising sugar content in grape must, and the concomitant increase in alcohol levels in wine, are some of the main challenges affecting the winemaking industry nowadays. Among the several alternative solutions currently under study, the use of non-conventional yeasts during fermentation holds good promise for contributing to relieve this problem. Non-Saccharomyces wine yeast species comprise a high number or species, so encompassing a wider physiological diversity than Saccharomyces cerevisiae. Indeed, the current oenological interest of these microorganisms was initially triggered by their potential positive contribution to the sensorial complexity of quality wines, through the production of aroma and other sensory-active compounds. This diversity also involves ethanol yield on sugar, one of the most invariant metabolic traits of S. cerevisiae. This review gathers recent research on non-Saccharomyces yeasts, aiming to produce wines with lower alcohol content than those from pure Saccharomyces starters. Critical aspects discussed include the selection of suitable yeast strains (considering there is a noticeable intra-species diversity for ethanol yield, as shown for other fermentation traits), identification of key environmental parameters influencing ethanol yields (including the use of controlled oxygenation conditions), and managing mixed fermentations, by either the sequential or simultaneous inoculation of S. cerevisiae and non-Saccharomyces starter cultures. The feasibility, at the industrial level, of using non-Saccharomyces yeasts for reducing alcohol levels in wine will require an improved understanding of the metabolism of these alternative yeast species, as well as of the interactions between different yeast starters during the fermentation of grape must. PMID:27199967

Third National Report on compliance with the Joint Convention Obligations

International Nuclear Information System (INIS)

2008-09-01

The Joint Convention on the Safety of Spent Fuel Management and the Safety of Radioactive Waste Management, hereinafter referred to as the 'Joint Convention', is the result of international discussions that followed the adoption of the Convention on Nuclear Safety, in 1994. France signed the Joint Convention at the General Conference of the International Atomic Energy Agency (IAEA) held on 29 September 1997, the very first day the Joint Convention was opened for signature. She approved it on 22 February 2000 and filed the corresponding instruments with the IAEA on 27 April 2000. The Joint Convention entered into force on 18 June 2001. For many years, France has been taking an active part in the pursuit of international actions to reinforce nuclear safety and considers the Joint Convention to be a key step in that direction. The fields covered by the Joint Convention have long been part of the French approach to nuclear safety. This report is the third one of its kind. It is published in accordance with Article 32 of the Joint Convention and presents the measures taken by France to meet each of her obligations set out in the Convention. The facilities and the radioactive materials covered by this Convention are quite diversified in nature and are controlled in France by different regulatory authorities. Above a specific threshold of radioactive content, a facility is referred to as a 'basic nuclear facility' (installation nucleaire de base - INB) and placed under the control of the Nuclear Safety Authority (Autorite de surete nucleaire - ASN). Below that threshold and provided that the facility involved is subject to the nomenclature of classified facilities for other purposes than their radioactive materials, any facility may be considered as a 'classified facility on environmental-protection grounds' (installation classee pour la protection de l'environnement - ICPE) and placed under the control of the Ministry for the Environment. Facilities that contain only

Design parameters and source terms: Volume 3, Source terms

International Nuclear Information System (INIS)

1987-10-01

The Design Parameters and Source Terms Document was prepared in accordance with DOE request and to provide data for the environmental impact study to be performed in the future for the Deaf Smith County, Texas site for a nuclear waste repository in salt. This document updates a previous unpublished report by Stearns Catalytic Corporation (SCC), entitled ''Design Parameters and Source Terms for a Two-Phase Repository in Salt,'' 1985, to the level of the Site Characterization Plan - Conceptual Design Report. The previous unpublished SCC Study identifies the data needs for the Environmental Assessment effort for seven possible Salt Repository sites. 11 refs., 9 tabs

Comparison of the prediction error in cataract surgery with Lenstar and conventional ultrasound

Directory of Open Access Journals (Sweden)

Hou-Cheng Liang

2013-12-01

Full Text Available AIM: To compare the prediction errors(PEin cataract surgery with Lenstar and conventional ultrasound. METHODS: The data of age-related cataract patients were retrospectively analyzed from March, 2013 to June, 2013 in our hospital. Preoperative measurements of ocular biological parameters and calculation of intraocular lens(IOLdegree using SRK/T's formula with ultrasound, keratometry and Lenstar were performed. Cataract extraction combined with IOL implantation in capsule was taken in every patient. Retinoscopy was taken postoperatively after 3 months. Comparison of the two inspection methods for measuring axial length, mean corneal curvature and postoperative refractive PE and absolute value of PE(APE. RESULTS: Preoperative axial length was 24.68±1.70mm and 24.42±1.65mm with Lenstar and ultrasound, respectively, and there was significant difference(t=-12.688, Pr=0.992, Pt=-1.241, P=0.217, but was the significant correlation(r=0.963, Pt=-5.494, Pt=6.379, PCONCLUSION: Accurate ocular biological parameters can be achieved with Lenstar, and postoperative PE is more precise with Lenstar compared with conventional ultrasound. Lenstar can be used for precise calculation of IOL degree in cataract operation.

Environmental parameters influence on the dynamics of total and pathogenic Vibrio parahaemolyticus densities in Crassostrea virginica harvested from Mexico's Gulf coast.

Science.gov (United States)

López-Hernández, Karla M; Pardío-Sedas, Violeta T; Lizárraga-Partida, Leonardo; Williams, José de J; Martínez-Herrera, David; Flores-Primo, Argel; Uscanga-Serrano, Roxana; Rendón-Castro, Karla

2015-02-15

The influence of environmental parameters on the total and pathogenic Vibrio parahaemolyticus seasonal densities in American oysters (Crassostrea virginica) was evaluated for 1 year. Harvesting site A yielded the highest mean densities of V. parahaemolyticus tlh+, tdh+/trh-, tdh-/trh+ and tdh+/trh+ during spring season at 2.57, 1.74, 0.36, and -0.40 log10 MPN/g, respectively, and tdh+/orf8+ during winter season (0.90 log10 MPN/g). V. parahaemolyticus tlh+ densities were associated to salinity (R(2)=0.372, Pturbidity (R(2)=0.597, P<0.035), and orf8+ to temperature, salinity, and pH (R(2)=0.964, P<0.001). The exposure to salinity and temperature conditions during winter and spring seasons regulated the dynamics of V. parahaemolyticus harboring potentially pathogenic genotypes within the oyster. The adaptive response of V. parahaemolyticus to seasonal environmental changes may lead to an increase in survival and virulence, threatening the seafood safety and increasing the risk of illness. Copyright © 2014 Elsevier Ltd. All rights reserved.

Tourism and Water: Themes of the Alpine Convention

Science.gov (United States)

Imhof, R.

2012-04-01

1) The contribution reflects the personal opinion of the author and does not necessarily reflect the point of view of the Permanent Secretariat. The Alpine Convention is a multilateral framework treaty signed in 1991 by the eight states of the Alpine bow as well as the European Community. Its main objectives are the sustainable development of the Alpine territory and the safeguarding of the interests of the people living within it, embracing the environmental, social and economic dimensions in the broadest sense. In order to achieve its objectives, over the years the Framework Convention has been equipped with a large number of thematic protocols, e.g. on tourism. The overall objective of the Protocol on Tourism, which first came into force in 2002, is to contribute to sustainable development in the Alpine region within the existing institutional framework, by encouraging environmentally-friendly tourism through specific measures and recommendations which take the interests of both the local population and tourists into account. The provisions of the Protocol on Tourism primarily concern tourism management and controlling tourist flows, structural developments such as ski lifts and ski slopes, accommodation and the balanced development of economically weak areas. Guidelines, development plans, sectoral plans have to be adopted at the appropriate territorial level in order to enable to assess the impact of tourism development on, inter alia, water. This extends also to ski slopes developments. For example the production of artificial snow production may be authorized only if the location's hydrological, climatic and ecological conditions allow. Water is listed among the twelve themes in relation to which the Contracting Parties are supposed to take measures and coordinate their policies (Article 2 of the Framework Convention). The Alpine Convention aims to preserve and re-establish healthy water systems, especially keeping waters clean and protecting the natural

A nuclear radiation multi-parameter measurement system based on pulse-shape sampling

International Nuclear Information System (INIS)

Qiu Xiaolin; Fang Guoming; Xu Peng; Di Yuming

2007-01-01

In this paper, A nuclear radiation multi-parameter measurement system based on pulse-shape sampling is introduced, including the system's characteristics, composition, operating principle, experiment data and analysis. Compared with conventional nuclear measuring apparatus, it has some remarkable advantages such as the synchronous detection using multi-parameter measurement in the same measurement platform and the general analysis of signal data by user-defined program. (authors)

Interpretation of the source-specific substantive control measures of the Minamata Convention on Mercury.

Science.gov (United States)

You, Mingqing

2015-02-01

Being persistent, toxic, and bio-accumulative, Mercury (Hg) seriously affects the environment and human health. Due to Hg's attribute of long-range environmental transport across national borders, especially through atmospheric transport, no country can fully protect its environment and human health with its own efforts, without global cooperation. The Minamata Convention on Mercury, which was formally adopted and opened for signature in October 2013, is the only global environmental regime on the control of Hg pollution. Its main substantive control measures are source-specific: its phasing-out, phasing-down, and other main substantive requirements all direct to specific categories of pollution sources through the regulation of specific sectors of the economy and social life. This Convention does not take a national quota approach to quantify the Parties' nationwide total allowable consumption or discharge of Hg or Hg compounds, nor does it quantify their nationwide total reduction requirements. This paper attempts to find the underlying reasons for this source-specific approach and offers two interpretations. One possible interpretation is that Hg might be a non-threshold pollutant, i.e., a pollutant without a risk-free value of concentration. The existence of a reference dose (RfD), reference concentration (RfC), provisional tolerable weekly intake (PTWI), minimal risk level (MRL) or other similar reference values of Hg does not necessarily mean that Hg cannot be regarded as non-threshold because such reference values have scientific uncertainties and may also involve policy considerations. Another interpretation is that Hg lacks a feasibly determinable total allowable quantity. There is evidence that negotiators might have treated Hg as non-threshold, or at least accepted that Hg lacks a feasibly determinable total allowable quantity: (1) The negotiators were informed about the serious situations of the current emissions, releases, and legacy deposition; (2

Environmental assessment of the atlas bio-energy waste wood fluidized bed gasification power plant. Final report

Energy Technology Data Exchange (ETDEWEB)

Holzman, M.I.

1995-08-01

The Atlas Bio-Energy Corporation is proposing to develop and operate a 3 MW power plant in Brooklyn, New York that will produce electricity by gasification of waste wood and combustion of the produced low-Btu gas in a conventional package steam boiler coupled to a steam-electric generator. The objectives of this project were to assist Atlas in addressing the environmental permit requirements for the proposed power plant and to evaluate the environmental and economic impacts of the project compared to more conventional small power plants. The project`s goal was to help promote the commercialization of biomass gasification as an environmentally acceptable and economically attractive alternative to conventional wood combustion. The specific components of this research included: (1) Development of a permitting strategy plan; (2) Characterization of New York City waste wood; (3) Characterization of fluidized bed gasifier/boiler emissions; (4) Performance of an environmental impact analysis; (5) Preparation of an economic evaluation; and (6) Discussion of operational and maintenance concerns. The project is being performed in two phases. Phase I, which is the subject of this report, involves the environmental permitting and environmental/economic assessment of the project. Pending NYSERDA participation, Phase II will include development and implementation of a demonstration program to evaluate the environmental and economic impacts of the full-scale gasification project.

Sweden's third national communication on climate change. Under the United Nations framework convention on climate change

International Nuclear Information System (INIS)

2001-01-01

Sweden's national communication to the UN Convention on Climate Change describes everything about the emission and absorption of greenhouse gases, the motives and forces behind emissions, and official Swedish climate policies. Every five years, Sweden submits a communication on practical climate efforts in Sweden to the UN Convention on Climate Change. The Swedish Environmental Protection Board has coordinated the work of producing the basic documentation for the communication, which also describes the measures already taken and those planned for the future. In addition, scenarios have been adopted for developments in Swedish greenhouse gas emissions, Sweden's vulnerability and Swedish research into the climate and climate change

International conventions and agreements in the ecological area: In light of modern civilization and international trade

Directory of Open Access Journals (Sweden)

Stanković Milica

2014-01-01

Full Text Available A large number of authors examine the problem of environmental protection in their papers. The concept of sustainable development and intensive use of modern technology in order to overcome the environmental problems of modern civilization becomes an imperative. Theoretical engagement in ecological issues is not enough. It is necessary to implement ecological measures in practice and to spread environmental awareness. Modern science and social practice have interdependence of economy and ecology in their focus. The main direction of social change is movement from economic to ecological paradigm that involves an ethical responsibility to the current and future generations. There is a need to establish effective programs to protect the environment at the national and supranational level. Active international cooperation in the field of ecology has resulted in the formulation of a number of documents on environmental protection. This paper illustrates the importance of environmental protection and the necessity of implementing international conventions and agreements in the environmental field, with focus on their impact on international trade.

The EU Arbitration Convention : An evaluating assessment of the governance and functioning of the EU Arbitration Convention

NARCIS (Netherlands)

Pit, Harm Mark

2017-01-01

The EU Arbitration Convention An evaluating assessment of the governance and functioning of the EU Arbitration Convention Summary for non-experts The EU Arbitration Convention is a convention between EU Member States to eliminate double taxation arising from – for tax purposes – transfer pricing

Environmental impact assessment of coal power plants in operation

Directory of Open Access Journals (Sweden)

Bartan Ayfer

2017-01-01

Full Text Available Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS. The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

Environmental impact assessment of coal power plants in operation

Science.gov (United States)

Bartan, Ayfer; Kucukali, Serhat; Ar, Irfan

2017-11-01

Coal power plants constitute an important component of the energy mix in many countries. However, coal power plants can cause several environmental risks such as: climate change and biodiversity loss. In this study, a tool has been proposed to calculate the environmental impact of a coal-fired thermal power plant in operation by using multi-criteria scoring and fuzzy logic method. We take into account the following environmental parameters in our tool: CO, SO2, NOx, particulate matter, fly ash, bottom ash, the cooling water intake impact on aquatic biota, and the thermal pollution. In the proposed tool, the boundaries of the fuzzy logic membership functions were established taking into account the threshold values of the environmental parameters which were defined in the environmental legislation. Scoring of these environmental parameters were done with the statistical analysis of the environmental monitoring data of the power plant and by using the documented evidences that were obtained during the site visits. The proposed method estimates each environmental impact factor level separately and then aggregates them by calculating the Environmental Impact Score (EIS). The proposed method uses environmental monitoring data and documented evidence instead of using simulation models. The proposed method has been applied to the 4 coal-fired power plants that have been operation in Turkey. The Environmental Impact Score was obtained for each power plant and their environmental performances were compared. It is expected that those environmental impact assessments will contribute to the decision-making process for environmental investments to those plants. The main advantage of the proposed method is its flexibility and ease of use.

Effects of graphite on rheological and conventional properties of bituminous binders

Directory of Open Access Journals (Sweden)

Yunus Erkuş

2017-07-01

Full Text Available In this study, the effects of graphite used for developing the rheological and conventional properties of bitumen were investigated using various bituminous binder tests. Penetration, softening point, rotational viscosity (RV, dynamic shear rheometer (DSR and bending beam rheometer (BBR tests were applied to bituminous binders modified with four different proportions of graphite by bitumen weight. The penetration values declined while softening point values increased with rising graphite content. While graphite induced 8 °C increases in mixing-compacting temperature by increasing the viscosity values, it also increased the rutting parameter. According to the BBR test, the deformation and stiffness values changed significantly with increasing graphite content, but the m-values did not change significantly. These results showed that graphite generally used for improving the thermal properties can improve to high temperature performance of mixtures. Keywords: Graphite, Bitumen, Conventional properties, Rheological properties

Biodegradable and compostable alternatives to conventional plastics

Science.gov (United States)

Song, J. H.; Murphy, R. J.; Narayan, R.; Davies, G. B. H.

2009-01-01

Packaging waste forms a significant part of municipal solid waste and has caused increasing environmental concerns, resulting in a strengthening of various regulations aimed at reducing the amounts generated. Among other materials, a wide range of oil-based polymers is currently used in packaging applications. These are virtually all non-biodegradable, and some are difficult to recycle or reuse due to being complex composites having varying levels of contamination. Recently, significant progress has been made in the development of biodegradable plastics, largely from renewable natural resources, to produce biodegradable materials with similar functionality to that of oil-based polymers. The expansion in these bio-based materials has several potential benefits for greenhouse gas balances and other environmental impacts over whole life cycles and in the use of renewable, rather than finite resources. It is intended that use of biodegradable materials will contribute to sustainability and reduction in the environmental impact associated with disposal of oil-based polymers. The diversity of biodegradable materials and their varying properties makes it difficult to make simple, generic assessments such as biodegradable products are all ‘good’ or petrochemical-based products are all ‘bad’. This paper discusses the potential impacts of biodegradable packaging materials and their waste management, particularly via composting. It presents the key issues that inform judgements of the benefits these materials have in relation to conventional, petrochemical-based counterparts. Specific examples are given from new research on biodegradability in simulated ‘home’ composting systems. It is the view of the authors that biodegradable packaging materials are most suitable for single-use disposable applications where the post-consumer waste can be locally composted. PMID:19528060

Biodegradable and compostable alternatives to conventional plastics.

Science.gov (United States)

Song, J H; Murphy, R J; Narayan, R; Davies, G B H

2009-07-27

Packaging waste forms a significant part of municipal solid waste and has caused increasing environmental concerns, resulting in a strengthening of various regulations aimed at reducing the amounts generated. Among other materials, a wide range of oil-based polymers is currently used in packaging applications. These are virtually all non-biodegradable, and some are difficult to recycle or reuse due to being complex composites having varying levels of contamination. Recently, significant progress has been made in the development of biodegradable plastics, largely from renewable natural resources, to produce biodegradable materials with similar functionality to that of oil-based polymers. The expansion in these bio-based materials has several potential benefits for greenhouse gas balances and other environmental impacts over whole life cycles and in the use of renewable, rather than finite resources. It is intended that use of biodegradable materials will contribute to sustainability and reduction in the environmental impact associated with disposal of oil-based polymers. The diversity of biodegradable materials and their varying properties makes it difficult to make simple, generic assessments such as biodegradable products are all 'good' or petrochemical-based products are all 'bad'. This paper discusses the potential impacts of biodegradable packaging materials and their waste management, particularly via composting. It presents the key issues that inform judgements of the benefits these materials have in relation to conventional, petrochemical-based counterparts. Specific examples are given from new research on biodegradability in simulated 'home' composting systems. It is the view of the authors that biodegradable packaging materials are most suitable for single-use disposable applications where the post-consumer waste can be locally composted.

Dismantlement and destruction of chemical, nuclear and conventional weapons

International Nuclear Information System (INIS)

Schulte, N.T.

1997-01-01

The safe destruction and dismantling of chemical, nuclear and conventional weapons is of fundamental importance to the security of all countries represented in this volume. Expertise in the field is not confined to one country or organisation: all can benefit from each other. There is an ever present danger of proliferation of weapons of mass destruction: approximately two dozen countries have ongoing programmes to develop or acquire such weapons, and many are also gaining the capability to build air-surface delivery systems. But much can be done to prevent proliferation by reducing leakage of materials and know-how and by solving the problems of the destruction of surplus weapons systems, which has now come to be a key issue. In 13 sessions of the workshop attention was paid to (1) Dismantlement and Destruction of Chemical, Nuclear and Conventional Weapons; (2) Status of Implementation of Arms Control Treaties and Voluntary Commitments; (3) National Perspectives on Cooperation in Disarmament; (4) Stocktaking of National and Bilateral Disposal/Destruction Programmes: Chemical Weapons; (5) Stocktaking of National and Bilateral Disposal/Destruction Programmes: Nuclear Weapons; (6) Stocktaking of National and Bilateral Disposal/Destruction Programmes: Conventional Weapons. Session; (7) Experience with Currently Employed Chemical Destruction Technologies; (8) Alternative Chemical Destruction Technologies; (9) Deactivation, Dismantlement and Destruction of Delivery Systems and Infrastructure for Nuclear Weapons; (10) Storage, Safeguarding and Disposition of Fissile Materials; (11) Technologies for Conversion and Civil Use of Demilitarized Materials; (12) International Organizations; and (13) Environmental Challenges Posed by Chemical and Nuclear Disarmament

NMR-based metabolomics of water-buffalo milk after conventional or biological feeding