WorldWideScience

Sample records for control centers final

  1. Electric Power Research Institute: Environmental Technology Control Center, report to the Steering committee. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    This report describes test for air pollution control of flue gas and mercury as a result of coal combustion. The NYSEG Kintigh Station provided flue gas to the Center 100% of the time during this performance period. As the Kintigh Station operated with a variety of coals, fluctuations in the Center`s inlet SO{sub 2} concentrations were experienced. Safety training for the month was conducted by the O&M Superintendent, Maintenance Supervisor and Shift Supervisors. {open_quotes}Personal Protective Equipment{close_quotes} was the topic of the month. Inspections of the ECTC Facility and safety equipment (SCR air-packs, fire extinguishers, etc.) were completed and recorded this month. All systems were found to be in good condition. By continuing to emphasize safe work habits at the Center, we have raised the total number of days without a lost time injury to 1426 as of 4/30/96. The monthly safety meeting with the NYSEG Kintigh Station was held on April 30, 1996 with both NYSEG and ECTC representatives. The topics of discussion included an overview of NYSEG`s upcoming alternate fuel burn, an update on plant staffing changes, and a discussion of future safety training activities.

  2. Human factors review of electric power dispatch control centers. Volume 4. Operator information needs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, R.J.; Najaf-Zadeh, K.; Darlington, H.T.; McNair, H.D.; Seidenstein, S.; Williams, A.R.

    1982-10-01

    Human factors is a systems-oriented interdisciplinary specialty concerned with the design of systems, equipment, facilities and the operational environment. An important aspect leading to the design requirements is the determination of the information requirements for electric power dispatch control centers. There are significant differences between the system operator's actions during normal and degraded states of power system operation, and power system restoration. This project evaluated the information the operator requires for normal power system and control system operations and investigates the changes of information required by the operator as the power system and/or the control system degrades from a normal operating state. The Phase II study, published in two volumes, defines power system states and control system conditions to which operator information content can be related. This volume presents detailed data concerning operator information needs that identify the needs for and the uses of power system information by a system operator in conditions ranging from normal through degraded operation. The study defines power system states and control system conditions to which operator information content can be related, and it identifies the requisite information as consistent with current industry practice so as to aid control system designers. Training requirements are also included for planning entry-level and follow-on training for operators.

  3. Electric Power Research Institute, Environmental Control Technology Center report to the steering committee. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit continued with the Pilot High Velocity FGD (PHV) and the Trace Element Removal (TER) test blocks. In the High Velocity test block, SO{sub 2} removal and mist eliminator carryover rates were investigated while operating the absorber unit with various spray nozzle types and vertical mist eliminator sections. During the Trace Element Removal test block, the mercury measurements and control studies involving the EPA Method 29 continued with testing of several impinger capture solutions, and the use of activated carbon injection across the Pulse-Jet Fabric Filter (PJFF) unit. The 4.0 MW Spray Dryer Absorber System was utilized this month in the TER test configuration to inject and transfer activated carbon to the PJFF bags for downstream mercury capture. Work also began in December to prepare the 0.4 MW Mini-Pilot Absorber system for receipt of the B and W Condensing Heat Exchanger (CHX) unit to be used in the 1996 DOE/PRDA testing. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit remained in cold-standby this month.

  4. Poison Control Centers

    Science.gov (United States)

    ... 1222 immediately. Name State American Association of Poison Control Centers Address AAPCC Central Office NOT A POISON ... not for emergency use. Arkansas ASPCA Animal Poison Control Center Address 1717 S. Philo Road, Suite 36 Urbana, ...

  5. Test Control Center (TCC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Test Control Center (TCC) provides a consolidated facility for planning, coordinating, controlling, monitoring, and analyzing distributed test events. ,The TCC...

  6. Human factors review of electric power dispatch control centers. Volume 3. Operator information needs summary. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, R.J.; Najaf-Zadeh, K.; Darlington, H.T.; McNair, H.D.; Seidenstein, S.; Williams, A.R.

    1982-10-01

    Human factors is a systems-oriented interdisciplinary specialty concerned with the design of systems, equipment, facilities and the operational environment. An important aspect leading to the design requirements is the determination of the information requirements for electric power dispatch control centers. There are significant differences between the system operator's actions during normal and degraded states of power system operation, and power system restoration. This project evaluated the information the operator requires for normal power system and control system operations and investigates the changes of information required by the operator as the power system and/or the control system degrades from a normal operating state. The Phase II study, published in two volumes, defines power system states and control system conditions to which operator information content can be related. This volume presents a summary of operator information needs, identifying the needs for and the uses of power system information by a system operator in conditions ranging from normal through degraded operation. Training requirements are also included for planning entry-level and follow-on training for operators.

  7. PSI-Center Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Jarboe, Thomas R. [Univ. of Washington, Seattle, WA (United States); Shumlak, Uri [Univ. of Washington, Seattle, WA (United States); Sovinec, Carl [Univ. of Washington, Seattle, WA (United States); Hansen, Chris [Univ. of Washington, Seattle, WA (United States); Ji, Jeong-Young [Utah State Univ., Logan, UT (United States); Nelson, Brian [Univ. of Wisconsin, Madison, WI (United States)

    2017-04-20

    This is the Final Progress Report of the Plasma Science and Innovation Center (PSI-Center) covering March 2014 through February 2017. The Center has accomplished a great deal during this period. The PSI-Center is organized into four groups: Edge and Dynamic Neutrals; Transport and Kinetic Effects; Equilibrium, Stability, and Kinetic Effects in 3D Topologies; and Interface for Validation. Each group has made good progress and the results from each group are given in detail.

  8. Electric Power Research Institute: Environmental Control Technology Center: Report to the Steering Committee, March 1996. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit continued this month with the Carbon Injection System for the Hazardous Air Pollutant (HAP) test block. With this testing, the mercury measurement (Method 29) studies also continued with various impinger capture solutions. Also, the installation of the B&W/CHX Heat Exchanger unit was completed in March. The 4.0 MW Spray Dryer Absorber System (Carbon Injection System) and the 4.0 MW Pilot Wet FGD Unit and were utilized in the HAP test configuration this month. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit remained idle this month in a cold- standby mode. Monthly inspections were conducted for all equipment in cold-standby, as well as for the fire safety systems, and will continue to be conducted by the ECTC Operations and Maintenance staff.

  9. Electric Power Research Institute: Environmental Control Technology Center. Report to the Steering Committee, November 1995. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit continued this month with the Pilot High Velocity (PHV) and the Trace Element Removal (TER) test blocks. In the High Velocity test block, SO{sub 2} removal and mist eliminator carryover rates were investigated while operating the absorber unit with various spray nozzle types and vertical mist eliminator sections. During the Trace Element Removal test block, the mercury measurement studies involving the EPA Draft Method 29 continued with testing of several impinger solutions. The 4.0 MW Spray Dryer Absorber system was utilized in the TER test configuration this month while the 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit and the 0.4 MW Mini-Pilot Absorber unit remained in a state of cold-standby. A monthly inspection was conducted for all equipment in cold-standby, as well as for the fire safety systems in the SCR building. These inspections will continue to be conducted by the ECTC Operations and Maintenance staff each month.

  10. Recovery Act: Federspiel Controls (now Vigilent) and State of California Department of General Services Data Center Energy Efficient Cooling Control Demonstration. Final technical project report

    Energy Technology Data Exchange (ETDEWEB)

    Federspiel, Clifford; Evers, Myah

    2011-09-30

    Eight State of California data centers were equipped with an intelligent energy management system to evaluate the effectiveness, energy savings, dollar savings and benefits that arise when powerful artificial intelligence-based technology measures, monitors and actively controls cooling operations. Control software, wireless sensors and mesh networks were used at all sites. Most sites used variable frequency drives as well. The system dynamically adjusts temperature and airflow on the fly by analyzing real-time demands, thermal behavior and historical data collected on site. Taking into account the chaotic interrelationships of hundreds to thousands of variables in a data center, the system optimizes the temperature distribution across a facility while also intelligently balancing loads, outputs, and airflow. The overall project will provide a reduction in energy consumption of more than 2.3 million kWh each year, which translates to $240,000 saved and a reduction of 1.58 million pounds of carbon emissions. Across all sites, the cooling energy consumption was reduced by 41%. The average reduction in energy savings across all the sites that use VFDs is higher at 58%. Before this case study, all eight data centers ran the cooling fans at 100% capacity all of the time. Because of the new technology, cooling fans run at the optimum fan speed maintaining stable air equilibrium while also expending the least amount of electricity. With lower fan speeds, the life of the capital investment made on cooling equipment improves, and the cooling capacity of the data center increases. This case study depicts a rare technological feat: The same process and technology worked cost effectively in eight very different environments. The results show that savings were achieved in centers with diverse specifications for the sizes, ages and types of cooling equipment. The percentage of cooling energy reduction ranged from 19% to 78% while keeping temperatures substantially within the

  11. RECOVERY ACT: DYNAMIC ENERGY CONSUMPTION MANAGEMENT OF ROUTING TELECOM AND DATA CENTERS THROUGH REAL-TIME OPTIMAL CONTROL (RTOC): Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Ron Moon

    2011-06-30

    This final scientific report documents the Industrial Technology Program (ITP) Stage 2 Concept Development effort on Data Center Energy Reduction and Management Through Real-Time Optimal Control (RTOC). Society is becoming increasingly dependent on information technology systems, driving exponential growth in demand for data center processing and an insatiable appetite for energy. David Raths noted, 'A 50,000-square-foot data center uses approximately 4 megawatts of power, or the equivalent of 57 barrels of oil a day1.' The problem has become so severe that in some cases, users are giving up raw performance for a better balance between performance and energy efficiency. Historically, power systems for data centers were crudely sized to meet maximum demand. Since many servers operate at 60%-90% of maximum power while only utilizing an average of 5% to 15% of their capability, there are huge inefficiencies in the consumption and delivery of power in these data centers. The goal of the 'Recovery Act: Decreasing Data Center Energy Use through Network and Infrastructure Control' is to develop a state of the art approach for autonomously and intelligently reducing and managing data center power through real-time optimal control. Advances in microelectronics and software are enabling the opportunity to realize significant data center power savings through the implementation of autonomous power management control algorithms. The first step to realizing these savings was addressed in this study through the successful creation of a flexible and scalable mathematical model (equation) for data center behavior and the formulation of an acceptable low technical risk market introduction strategy leveraging commercial hardware and software familiar to the data center market. Follow-on Stage 3 Concept Development efforts include predictive modeling and simulation of algorithm performance, prototype demonstrations with representative data center equipment to

  12. FFTF Work Control Center

    International Nuclear Information System (INIS)

    Talbot, M.D.

    1986-01-01

    A centralized Work Control Center (WCC) is responsible for assuring that maintenance and modification of the Fast Flux Test Facility (FFTF) is performed in accordance with written procedures that ensure design integrity, personnel and public safety, and equipment and system availability for the computerized Master Information Data Acquisition System (MIDAS). Each maintenance task is logged into MIDAS from a Work Request from that has been reviewed and prioritized by the WCC. Thereafter, MIDAS is used to track schedule, manpower and material requirements; authorize field work; and close out the maintenance activity

  13. 'Motor control center obsolescence'

    International Nuclear Information System (INIS)

    Irish, C.S.

    2003-01-01

    A significant and growing problem within the global nuclear industry is the aging of motor control center (MCC) components. MCC's have a very important role in the safety and critical to generation requirements of a nuclear power plant. Although many OEM's MCC's such as ITE/Telemechanique, GE, Westinghouse, Cutler Hammer, Klockner Moeller, etc. have been used throughout the global nuclear industry, they all have one common aspect obsolescence. Obsolescence of various components within the MCC's such as molded case circuit breakers, starters, relays, heaters, contactors, etc. are impacting the reliability of the MCC to serve its intended function. The paper will discuss the options which the nuclear industry is faced with to increase the reliability of the MCC's while maintaining design control, qualification and meeting budget constraints. The options as listed below shall be discussed in detail with examples to enhance the readers understanding of the situation: 1) Component by component replacement: The hurdles associated with trying to find equivalent components to replace the obsolete components while still worki (mechanically and electrically) in the original cubicle will be presented. 2) Complete MCC cubicle with new internal components replacement: The process of supplying a replacement cubicle, with all new internal components and new door to replace the original cubicle will be discussed. The presentation will conclude with a comparison of the advantages and dis-advantages of the two methods to bring the MCC to an as new condition with the overall goal of increasing reliability. (author)

  14. Launch Vehicle Control Center Architectures

    Science.gov (United States)

    Watson, Michael D.; Epps, Amy; Woodruff, Van; Vachon, Michael Jacob; Monreal, Julio; Williams, Randall; McLaughlin, Tom

    2014-01-01

    This analysis is a survey of control center architectures of the NASA Space Launch System (SLS), United Launch Alliance (ULA) Atlas V and Delta IV, and the European Space Agency (ESA) Ariane 5. Each of these control center architectures have similarities in basic structure, and differences in functional distribution of responsibilities for the phases of operations: (a) Launch vehicles in the international community vary greatly in configuration and process; (b) Each launch site has a unique processing flow based on the specific configurations; (c) Launch and flight operations are managed through a set of control centers associated with each launch site, however the flight operations may be a different control center than the launch center; and (d) The engineering support centers are primarily located at the design center with a small engineering support team at the launch site.

  15. The Keystone Center final technical report

    International Nuclear Information System (INIS)

    1998-01-01

    The Keystone Center began its work with the Environmental Management Science Program (EMSP) in May, 1996, when The Center agreed to design, organize, and facilitate stakeholder meetings at two DOE sites: Savannah River and Hanford. These meetings were held June 24--25, 1996 for the purpose of discussing the role of EMSP in constructing a site-specific basic research agenda that maps site cleanup needs to basic science areas. Summaries of the discussions from these meetings as well as lists of the stakeholders who were invited are included as Attachment 1. In August/September 1996, the Keystone Center was asked to convene two additional site meetings using funds that remained in their contract. These meetings were held in October 1996 at Oak Ridge and Idaho National Engineering Laboratory. Summaries from these meetings and participant lists are included as Attachment 2

  16. Energy Materials Center at Cornell: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Abruña, Héctor [Cornell Univ., Ithaca, NY (United States); Mutolo, Paul F [Cornell Univ., Ithaca, NY (United States)

    2015-01-02

    The mission of the Energy Materials Center at Cornell (emc2) was to achieve a detailed understanding, via a combination of synthesis of new materials, experimental and computational approaches, of how the nature, structure, and dynamics of nanostructured interfaces affect energy conversion and storage with emphasis on fuel cells, batteries and supercapacitors. Our research on these systems was organized around a full system strategy for; the development and improved performance of materials for both electrodes at which storage or conversion occurs; understanding their internal interfaces, such as SEI layers in batteries and electrocatalyst supports in fuel cells, and methods for structuring them to enable high mass transport as well as high ionic and electronic conductivity; development of ion-conducting electrolytes for batteries and fuel cells (separately) and other separator components, as needed; and development of methods for the characterization of these systems under operating conditions (operando methods) Generally, our work took industry and DOE report findings of current materials as a point of departure to focus on novel material sets for improved performance. In addition, some of our work focused on studying existing materials, for example observing battery solvent degradation, fuel cell catalyst coarsening or monitoring lithium dendrite growth, employing in operando methods developed within the center.

  17. Poison control center - emergency number

    Science.gov (United States)

    For a POISON EMERGENCY call: 1-800-222-1222 ANYWHERE IN THE UNITED STATES This national hotline number will let you ... is a free and confidential service. All local poison control centers in the United States use this ...

  18. Hydraulically centered control rod

    International Nuclear Information System (INIS)

    Horlacher, W.R.; Sampson, W.T.; Schukei, G.E.

    1981-01-01

    A control rod suspended to reciprocate in a guide tube of a nuclear fuel assembly has a hydraulic bearing formed at its lower tip. The bearing includes a plurality of discrete pockets on its outer surface into which a flow of liquid is continuously provided. In one embodiment the flow is induced by the pressure head in a downward facing chamber at the end of the bearing. In another embodiment the flow originates outside the guide tube. In both embodiments the flow into the pockets produces pressure differences across the bearing which counteract forces tending to drive the rod against the guide tube wall. Thus contact of the rod against the guide tube is avoided

  19. Industrial assessment center program. Final Report

    International Nuclear Information System (INIS)

    Ahmad R. Ganji, Ph.D., P.E., IAC DIrector

    2007-01-01

    The Industrial Assessment Center (IAC) at San Francisco State University (SFSU) has served the cause of energy efficiency as a whole, and in particular for small and medium-sized manufacturing facilities in northern and central California, within a approximately 150 miles (radial) of San Francisco since 1992. In the current reporting period (September 1, 2002 through November 31, 2006) we have had major accomplishments, which include but are not limited to: Performing a total of 94 energy efficiency and waste minimization audit days of 87 industrial plants; Recommending and analysis of 809 energy efficiency measures; Training 22 energy engineers, most of whom have joined energy services companies in California; Disseminating energy efficiency information among local manufacturers; Acting as an information source for energy efficiency for local manufacturers and utilizes; Cooperating with local utilities and California Energy Commission in their energy efficiency projects; Performing various assignments by DOE such as dissemination of information on SEN initiative, conducting workshops on energy efficiency issues, contacting large energy user plants--Establishing a course on 'Energy: Resources, Alternatives and Conservation' as a general education course at SFSU; Bringing energy issues to the attention of students in classrooms

  20. Final Technical Report. Factors Controlling In Situ Uranium and Technetium Bio-Reduction and Reoxidation at the NABIR Field Research Center

    International Nuclear Information System (INIS)

    Dr. Jonathan D. Istok , Oregon State University; Dr. Lee Krumholz, University of Oklahoma; Dr. James McKinley, Pacific Northwest National Laboratory; Dr. Baohua Gu, Oak Ridge National Laboratory

    2006-01-01

    The overall goal of this project was to better understand factors and processes controlling microbially-mediated reduction and reoxidation of U and Tc in the unconsolidated residuum overlying the Nolichucky shale at the Field Research Center (FRC) at Oak Ridge National Laboratory. Project activities were designed to test the following hypotheses: (1) The small rates of denitrification and U bio-reduction observed in laboratory incubations of sediments from FRC Area 1 at low pH (< 5) are due to the presence of high concentrations of toxic metals (especially Al and Ni). Rates of Tc reduction will also be small at low pH in the presence of high concentrations of toxic metals. (2) In situ rates of U and perhaps Tc bio-reduction can be increased by increasing system pH and thus precipitating toxic metals from solution. (3) In situ rates of U and Tc bio-reduction can be increased by the addition of humic substances, which complex toxic metals such as Al and Ni, buffer pH, and serve as electron shuttles to facilitate U and Tc reduction. (4) Microbially-reduced U and Tc are rapidly oxidized in the presence of high concentrations of NO3- and the denitrification intermediates NO2-, N2O, and NO. (5) An electron-donor-addition strategy (type and form of donor, with or without pH adjustment and with or without the co-addition of humic substances) can be devised to reduce U and Tc concentrations for an extended period of time in low pH groundwater in the presence of high concentrations of NO3-, Al, and Ni. This strategy operates by removing or complexing these components of FRC groundwater to allow the subsequent reduction of U(VI) and Tc(VII)

  1. Virtualized Network Control. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Ghani, Nasir [Univ. of New Mexico, Albuquerque, NM (United States)

    2013-02-01

    This document is the final report for the Virtualized Network Control (VNC) project, which was funded by the United States Department of Energy (DOE) Office of Science. This project was also informally referred to as Advanced Resource Computation for Hybrid Service and TOpology NEtworks (ARCHSTONE). This report provides a summary of the project's activities, tasks, deliverable, and accomplishments. It also provides a summary of the documents, software, and presentations generated as part of this projects activities. Namely, the Appendix contains an archive of the deliverables, documents, and presentations generated a part of this project.

  2. Learning System Center App Controller

    CERN Document Server

    Naeem, Nasir

    2015-01-01

    This book is intended for IT professionals working with Hyper-V, Azure cloud, VMM, and private cloud technologies who are looking for a quick way to get up and running with System Center 2012 R2 App Controller. To get the most out of this book, you should be familiar with Microsoft Hyper-V technology. Knowledge of Virtual Machine Manager is helpful but not mandatory.

  3. Radiation effect of radioiodide therapy on the hypophyseal and hypothalamic feedback control centers for thyroid function studied by dry-mount autoradiography. Final technical report

    International Nuclear Information System (INIS)

    Stumpf, W.E.

    1972-01-01

    Results are reported from studies in rats on the effects of β radiation from therapeutic doses of 131 I on the physiology of the pituitary gland and on brain structures considered thyroid hormone control areas. Iodine-125-labeled triiodothyronine and thyroxine and autoradiographic techniques were used to determine the cellular and subcellular localization of thyroid hormones in the brain tissues of untreated and thyroidectomized animals. The results suggest that thyroid hormones act on all neurons throughout the mature brain. (U.S.)

  4. Final Report - DOE Center for Laser Imaging and Cancer Diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Alfano, Robert R.; Koutcher, Jason A.

    2002-10-31

    This Final Report summarizes the significant progress made by the researchers, students and staff of the Center for Laser Imaging and Cancer Diagnostics (CLICD) from January 1998 through May 2002. During this period, the Center supported several projects. Most projects were proposed initially, some were added subsequently as their relevance and importance to the DOE mission became evident. DOE support has been leveraged to obtain continuing funding for some projects. Leveraged funds come from various sources, including NIH, Army, NSF and the Air Force. The goal of the Center was to develop laser-based instruments for use in the detection and diagnosis of major diseases, with an emphasis on detection and diagnosis of various cancers. Each of the supported projects is a collaborative effort between physicists and laser scientists and the City College of New York and noted physicians, surgeons, pathologists, and biologists located at medical centers in the Metropolitan area. The participating institutions were: City College of New York Institute for Ultrafast Lasers and Spectroscopy, Hackensack University Medical Center, Lawrence Livermore National Laboratory, Memorial Sloan Kettering Cancer Center, and New York Eye and Ear Institute. Each of the projects funded by the Center is grouped into one of four research categories: a) Disease Detection, b) Non-Disease Applications, c) New Diagnostic Tools, and, d) Education, Training, Outreach and Dissemination. The progress achieved by the multidisciplinary teams was reported in 51 publications and 32 presentations at major national conferences. Also, one U.S. patent was obtained and six U.S. patent applications have been filed for innovations resulting from the projects sponsored by the Center.

  5. Emergency control centers for nuclear power plants

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Guidance is provided for the development and implementation of emergency control centers for nuclear power plants, including nuclear plant control room, nuclear plant company headquarters, emergency control center, and nuclear plant alternate emergency control center. Requirements and recommendations are presented for the mission, communications, instrumentation and equipment associated with each type of control center. Decisional aids, manning requirements and resources are also given; the decision aids cover both the accident assessment and protective action areas. Both normal and alternate means of communications are considered. Off-site emergency control centers, although not covered in the strict sense by this standard, are considered in an appendix

  6. Final Report. Center for Scalable Application Development Software

    Energy Technology Data Exchange (ETDEWEB)

    Mellor-Crummey, John [Rice Univ., Houston, TX (United States)

    2014-10-26

    The Center for Scalable Application Development Software (CScADS) was established as a part- nership between Rice University, Argonne National Laboratory, University of California Berkeley, University of Tennessee – Knoxville, and University of Wisconsin – Madison. CScADS pursued an integrated set of activities with the aim of increasing the productivity of DOE computational scientists by catalyzing the development of systems software, libraries, compilers, and tools for leadership computing platforms. Principal Center activities were workshops to engage the research community in the challenges of leadership computing, research and development of open-source software, and work with computational scientists to help them develop codes for leadership computing platforms. This final report summarizes CScADS activities at Rice University in these areas.

  7. Comprehensive low-cost reliability centered maintenance. Final report

    International Nuclear Information System (INIS)

    Rotton, S.J.; Dozier, I.J.; Thow, R.

    1995-09-01

    Reliability Centered Maintenance (RCM) is a maintenance optimization approach that all electric utilities can apply to power plant systems. The Electric Power Research Institute and PECO Energy Company jointly sponsored this Comprehensive Low-Cost Reliability Centered Maintenance project to demonstrate that the standard RCM methodology could be streamlined to reduce the cost of analysis while maintaining a high quality product. EPRI's previous investigation of streamlined RCM methods being pioneered in the nuclear industry indicated that PECO Energy could expect to optimize its maintenance program at reduced cost by carefully controlling the scope without sacrificing documentation or technical quality. Using the insights obtained from these previous studies, three methods were defined in this project and were demonstrated in a large scale application to 60 systems at both the Limerick Generating Station and the Peach Bottom Atomic Power Station

  8. Final report for the DOE Metal Hydride Center of Excellence.

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jay O.; Klebanoff, Leonard E.

    2012-01-01

    This report summarizes the R&D activities within the U.S. Department of Energy Metal Hydride Center of Excellence (MHCoE) from March 2005 to June 2010. The purpose of the MHCoE has been to conduct highly collaborative and multi-disciplinary applied R&D to develop new reversible hydrogen storage materials that meet or exceed DOE 2010 and 2015 system goals for hydrogen storage materials. The MHCoE combines three broad areas: mechanisms and modeling (which provide a theoretically driven basis for pursuing new materials), materials development (in which new materials are synthesized and characterized) and system design and engineering (which allow these new materials to be realized as practical automotive hydrogen storage systems). This Final Report summarizes the organization and execution of the 5-year research program to develop practical hydrogen storage materials for light duty vehicles. Major results from the MHCoE are summarized, along with suggestions for future research areas.

  9. The Poison Control Center--Its Role

    Science.gov (United States)

    Manoguerra, Anthony S.

    1976-01-01

    Poison Control Centers are being utilized by more schools of pharmacy each year as training sites for students. This paper discusses what such a center is, its services, changes anticipated in the poison center system in the next several years and how they may influence pharmacy education, specifically as it relates to clinical toxicology.…

  10. UC Merced Center for Computational Biology Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Colvin, Michael; Watanabe, Masakatsu

    2010-11-30

    Final report for the UC Merced Center for Computational Biology. The Center for Computational Biology (CCB) was established to support multidisciplinary scientific research and academic programs in computational biology at the new University of California campus in Merced. In 2003, the growing gap between biology research and education was documented in a report from the National Academy of Sciences, Bio2010 Transforming Undergraduate Education for Future Research Biologists. We believed that a new type of biological sciences undergraduate and graduate programs that emphasized biological concepts and considered biology as an information science would have a dramatic impact in enabling the transformation of biology. UC Merced as newest UC campus and the first new U.S. research university of the 21st century was ideally suited to adopt an alternate strategy - to create a new Biological Sciences majors and graduate group that incorporated the strong computational and mathematical vision articulated in the Bio2010 report. CCB aimed to leverage this strong commitment at UC Merced to develop a new educational program based on the principle of biology as a quantitative, model-driven science. Also we expected that the center would be enable the dissemination of computational biology course materials to other university and feeder institutions, and foster research projects that exemplify a mathematical and computations-based approach to the life sciences. As this report describes, the CCB has been successful in achieving these goals, and multidisciplinary computational biology is now an integral part of UC Merced undergraduate, graduate and research programs in the life sciences. The CCB began in fall 2004 with the aid of an award from U.S. Department of Energy (DOE), under its Genomes to Life program of support for the development of research and educational infrastructure in the modern biological sciences. This report to DOE describes the research and academic programs

  11. Intelligent tutors for control center operator training

    Energy Technology Data Exchange (ETDEWEB)

    Vale, Z.A. [Porto Univ. (Portugal). Dept. of Electrical and Computer Engineering; Fernandes, M.F.; Marques, A. [Electricity of Portugal, Sacavem (Portugal)

    1995-12-31

    Power systems are presently remotely operated and controlled from control centers that receive on-line information about the power system state. Control center operators have very high-demanding tasks what makes their training a key issue for the performance of the whole power system. Simulators are usually used by electrical utilities for this purpose but they are very expensive applications and their use requires the preparation of the training sessions by qualified training staff which is a very time consuming task. Due to this, these simulators are only used a few times a year. Intelligent Tutoring Systems (ITS) provide some new possibilities for control center operator training making easier its use without much assistance of the teaching staff. On the other hand, an expert system in use in a control center can be adapted to an ITS to train operators without much effort. 18 refs

  12. Centers for Disease Control and Prevention

    Science.gov (United States)

    ... PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel ... Centers for Disease Control and Prevention Page maintained by: Office of Associate Director of Communication, Division of Public ...

  13. Distribution control centers in the Croatian power system with particular consideration on ZAgreb distribution control center

    International Nuclear Information System (INIS)

    Cupin, N.

    2000-01-01

    Discussion about control of Croatian Power system in the view of forthcoming free electricity market did not included do far distribution level. With this article we would like to clarify the role of distribution control centers pointing out importance of Zagreb Distribution control center, with controls one third of Croatian (HEP) consumption. (author)

  14. The SPICE Center at Bluefield State College. Final Report.

    Science.gov (United States)

    Roberts, David Harrill

    The writing center at Bluefield State College (West Virginia) is called the SPICE Center, SPICE being an acronym for Self Paced Instruction for Competency in English. In addition to emphasizing skill acquisition and flexibility, it stresses face-to-face evaluation of written work, and places heavy emphasis on writing as process instead of writing…

  15. University of Maryland component of the Center for Multiscale Plasma Dynamics: Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Dorland, William [University of Maryland

    2014-11-18

    The Center for Multiscale Plasma Dynamics (CMPD) was a five-year Fusion Science Center. The University of Maryland (UMD) and UCLA were the host universities. This final technical report describes the physics results from the UMD CMPD.

  16. The ORNL Controlled Fusion Atomic Data Center

    International Nuclear Information System (INIS)

    Schultz, D.R.; Krstic, P.S.; Ownby, F.M.; Meyer, F.W.; Havener, C.C.; Bannister, M.E.; Liu, W.; Jeffery, D.J.; Stancil, P.C.

    1997-01-01

    The principal mission of the Controlled Fusion Atomic Data Center is the collection evaluation, and dissemination of atomic collision data relevant to fusion energy development. With the advent of the widespread use of the World Wide Web, the data center's resources are being placed on-line to facilitate their use by end-users (cf. http://www-cfadc.phy.ornl.gov/). As this development continues, initially disparate, individually compiled resources will be transformed into integrated tools for retrieving recommended data, or displaying and manipulating the information available. The data center's present capabilities, recent data production/evaluation efforts, and goals for future development are highlighted here

  17. Trainer module for security control center operations

    International Nuclear Information System (INIS)

    Bernard, E.A.

    1982-01-01

    An operator trainer module has been developed to be used with the security control center equipment to be installed as part of a safeguards physical protection system. The module is designed to provide improved training and testing capabilities for control center operators through the use of simulations for perimeter equipment operations. Operators, through the trainer module, can be challenged with a variety of realistic situations which require responsive action identical to that needed in an actual system. This permits a consistent evaluation and confirmation of operator capabilities prior to assignment as an operator and allows for periodic retesting to verify that adequate performance levels are maintained

  18. Poison control center - Emergency number (image)

    Science.gov (United States)

    For a poison emergency call 1-800-222-1222 anywhere in the United States. This national hotline number will let you ... is a free and confidential service. All local poison control centers in the U.S. use this national ...

  19. Redox Biology Final Examination 2016 | Center for Cancer Research

    Science.gov (United States)

    Numerous registrants have requested a certificate upon completion of the Redox Biology (RB) course. In order to obtain a certificate, you must answer 8 of the 12 questions below correctly. In the final examination, 1 question is derived from each of the 1-hour lectures. It is highly recommended that you have a copy of each PowerPoint presentation prior to taking the

  20. The NIRA computer program package (photonuclear data center). Final report

    International Nuclear Information System (INIS)

    Vander Molen, H.J.; Gerstenberg, H.M.

    1976-02-01

    The Photonuclear Data Center's NIRA library of programs, executable from mass storage on the National Bureau of Standard's central computer facility, is described. Detailed instructions are given (with examples) for the use of the library to analyze, evaluate, synthesize, and produce for publication camera-ready tabular and graphical presentations of digital photonuclear reaction cross-section data. NIRA is the acronym for Nuclear Information Research Associate

  1. Improving the Efficient of Ernie Turner Center. Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Fredeen, Amy

    2011-03-21

    The objective of this project was to complete the specifications and drawings for a variable speed kitchen exhaust system and the boiler heating system which when implemented will improve the heating efficiency of the building. The design work was focused in two key areas: kitchen ventilation and heating for the Ernie Turner Center building (ETC). RSA completed design work and issued a set of 100% drawings. RSA also worked with a cost estimator to put together a detailed cost estimate for the project. The design components are summarized.

  2. Alternative Energy Center, Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Dillman, Howard D.; Marshall, JaNice C.

    2007-09-07

    The Lansing Community College Alternative Energy Center was created with several purposes in mind. The first purpose was the development of educational curricula designed to meet the growing needs of advanced energy companies that would allow students to articulate to other educational institutions or enter this growing workforce. A second purpose was the professional development of faculty and teachers to prepare them to train tomorrow's workforce and scholars. Still another purpose was to design, construct, and equip an alternative energy laboratory that could be used for education, demonstration, and public outreach. Last, the Center was to engage in community outreach and education to enhance industry partnerships, inform decision makers, and increase awareness and general knowledge of hydrogen and other alternative energy technologies and their beneficial impacts on society. This project has enabled us to accomplish all of our goals, including greater faculty understanding of advanced energy concepts, who are now able to convey this knowledge to students through a comprehensive alternative energy curriculum, in a facility well-equipped with advanced technologies, which is also being used to better educate the public on the advantages to society of exploring alternative energy technologies.

  3. Final Report: Center for Programming Models for Scalable Parallel Computing

    Energy Technology Data Exchange (ETDEWEB)

    Mellor-Crummey, John [William Marsh Rice University

    2011-09-13

    As part of the Center for Programming Models for Scalable Parallel Computing, Rice University collaborated with project partners in the design, development and deployment of language, compiler, and runtime support for parallel programming models to support application development for the “leadership-class” computer systems at DOE national laboratories. Work over the course of this project has focused on the design, implementation, and evaluation of a second-generation version of Coarray Fortran. Research and development efforts of the project have focused on the CAF 2.0 language, compiler, runtime system, and supporting infrastructure. This has involved working with the teams that provide infrastructure for CAF that we rely on, implementing new language and runtime features, producing an open source compiler that enabled us to evaluate our ideas, and evaluating our design and implementation through the use of benchmarks. The report details the research, development, findings, and conclusions from this work.

  4. Final Scientific Technical Report Crowder College MARET Center

    Energy Technology Data Exchange (ETDEWEB)

    Boyt, Art [Crowder College, Neosho, MO (United States); Eberle, Dan [Crowder College, Neosho, MO (United States); Hudson, Pam [Crowder College, Neosho, MO (United States); Hopper, Russ [Crowder College, Neosho, MO (United States)

    2013-06-30

    Following decades of success in solar energy projects, the Missouri Legislature designated Crowder College in 1992 as the State's renewable energy education center. The resulting Missouri Alternative and Renewable Energy Technology (MARET) Center is recognized internationally for its contributions to the energy field. The mission of the MARET Center is to expand renewable energy throughout the region with education, applied research, and economic development. Educational programs include certification and transfer degrees encompassing green construction, solar thermal energy, solar electricity, and wind. The MARET Center also assists in new product development and other business support services in renewable energy. The Missouri Alternative and Renewable Energy Technology (MARET) Center at Crowder College hopes to eventually develop a 27,500 ft2 facility as a living laboratory to support solar and other renewable and sustainable energy development through professional degrees, new product development and commercialization, renewable energy business incubation, and consumer education. The primary objective of the current project was to complete Stage One of this building, with solar, wind, and geothermal technologies installed to power its 9,216 ft2 office, classroom, and research spaces. This MARET Center includes a modular roof structure that permits both solar module mounting and daylighting, PV/thermal hybrid modules pioneered in Crowder Solar Decathlon homes, modular electrical management subsystems; and modular delivery systems for heating and cooling the structure. The MARET Facility will operate as a Net Positive energy building, consistently producing surplus energy for distributed generation on the utility grid. The modular design of the energy systems within the building is to serve as a scalable and repeatable model for a wide variety of building applications and climate zones. As a living laboratory of renewable energy

  5. Hydrogen Storage Engineering Center of Excellence Metal Hydride Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Motyka, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2014-05-31

    The Hydrogen Storage Engineering Center of Excellence (HSECoE) was established in 2009 by the U.S. Department of Energy (DOE) to advance the development of materials-based hydrogen storage systems for hydrogen-fueled light-duty vehicles. The overall objective of the HSECoE is to develop complete, integrated system concepts that utilize reversible metal hydrides, adsorbents, and chemical hydrogen storage materials through the use of advanced engineering concepts and designs that can simultaneously meet or exceed all the DOE targets. This report describes the activities and accomplishments during Phase 1 of the reversible metal hydride portion of the HSECoE, which lasted 30 months from February 2009 to August 2011. A complete list of all the HSECoE partners can be found later in this report but for the reversible metal hydride portion of the HSECoE work the major contributing organizations to this effort were the United Technology Research Center (UTRC), General Motors (GM), Pacific Northwest National Laboratory (PNNL), the National Renewable Energy Laboratory (NREL) and the Savannah River National Laboratory (SRNL). Specific individuals from these and other institutions that supported this effort and the writing of this report are included in the list of contributors and in the acknowledgement sections of this report. The efforts of the HSECoE are organized into three phases each approximately 2 years in duration. In Phase I, comprehensive system engineering analyses and assessments were made of the three classes of storage media that included development of system level transport and thermal models of alternative conceptual storage configurations to permit detailed comparisons against the DOE performance targets for light-duty vehicles. Phase 1 tasks also included identification and technical justifications for candidate storage media and configurations that should be capable of reaching or exceeding the DOE targets. Phase 2 involved bench-level testing and

  6. Center for Advanced Biofuel Systems (CABS) Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Kutchan, Toni M. [Donald Danforth Plant Science Center, St. Louis, MO (United States)

    2015-12-02

    One of the great challenges facing current and future generations is how to meet growing energy demands in an environmentally sustainable manner. Renewable energy sources, including wind, geothermal, solar, hydroelectric, and biofuel energy systems, are rapidly being developed as sustainable alternatives to fossil fuels. Biofuels are particularly attractive to the U.S., given its vast agricultural resources. The first generation of biofuel systems was based on fermentation of sugars to produce ethanol, typically from food crops. Subsequent generations of biofuel systems, including those included in the CABS project, will build upon the experiences learned from those early research results and will have improved production efficiencies, reduced environmental impacts and decreased reliance on food crops. Thermodynamic models predict that the next generations of biofuel systems will yield three- to five-fold more recoverable energy products. To address the technological challenges necessary to develop enhanced biofuel systems, greater understanding of the non-equilibrium processes involved in solar energy conversion and the channeling of reduced carbon into biofuel products must be developed. The objective of the proposed Center for Advanced Biofuel Systems (CABS) was to increase the thermodynamic and kinetic efficiency of select plant- and algal-based fuel production systems using rational metabolic engineering approaches grounded in modern systems biology. The overall strategy was to increase the efficiency of solar energy conversion into oils and other specialty biofuel components by channeling metabolic flux toward products using advanced catalysts and sensible design:1) employing novel protein catalysts that increase the thermodynamic and kinetic efficiencies of photosynthesis and oil biosynthesis; 2) engineering metabolic networks to enhance acetyl-CoA production and its channeling towards lipid synthesis; and 3) engineering new metabolic networks for the

  7. Final priority; Technical Assistance on State Data Collection--IDEA Data Management Center. Final priority.

    Science.gov (United States)

    2014-08-05

    The Assistant Secretary for the Office of Special Education and Rehabilitative Services (OSERS) announces a priority under the Technical Assistance on State Data Collection program. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to fund a cooperative agreement to establish and operate an IDEA Data Management Center (Center) that will provide technical assistance (TA) to improve the capacity of States to meet the data collection requirements of the Individuals with Disabilities Education Act (IDEA).

  8. Computer-aided dispatch--traffic management center field operational test : state of Utah final report

    Science.gov (United States)

    2006-07-01

    This document provides the final report for the evaluation of the USDOT-sponsored Computer-Aided Dispatch Traffic Management Center Integration Field Operations Test in the State of Utah. The document discusses evaluation findings in the followin...

  9. Computer-aided dispatch--traffic management center field operational test : Washington State final report

    Science.gov (United States)

    2006-05-01

    This document provides the final report for the evaluation of the USDOT-sponsored Computer-Aided Dispatch - Traffic Management Center Integration Field Operations Test in the State of Washington. The document discusses evaluation findings in the foll...

  10. Model Orlando regionally efficient travel management coordination center (MORE TMCC), phase II : final report.

    Science.gov (United States)

    2012-09-01

    The final report for the Model Orlando Regionally Efficient Travel Management Coordination Center (MORE TMCC) presents the details of : the 2-year process of the partial deployment of the original MORE TMCC design created in Phase I of this project...

  11. Final priority; National Institute on Disability and Rehabilitation Research--Rehabilitation Engineering Research Centers. Final priority.

    Science.gov (United States)

    2014-07-09

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Disability and Rehabilitation Research Projects and Centers Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). Specifically, we announce a priority for a Rehabilitation Engineering Research Center (RERC) on Improving the Accessibility, Usability, and Performance of Technology for Individuals who are Deaf or Hard of Hearing. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to focus research attention on an area of national need. We intend the priority to contribute to improving the accessibility, usability, and performance of technology for individuals who are deaf or hard of hearing.

  12. Final Environmental Assessment for the California Space Center at Vandenberg Air Force Base, California

    Science.gov (United States)

    2010-06-02

    rooted , mesophylic plant species that Chapter 3. Affected Environment Final Environmental Assessment - California Space Center, Vandenberg Air...Chapter 3. Affected Environment 3-12 Final Environmental Assessment - California Space Center, Vandenberg Air Force Base the root and debris zone of the...protruding objects, slippery soils or mud, and biological hazards including vegetation (i.e. poison oak and stinging nettle ), animals (i.e. insects

  13. Xingo`s control center; Centro de controle de Xingo

    Energy Technology Data Exchange (ETDEWEB)

    Parente, Benedito; Souza, Antonio; Ferraz, Adelson; Florentino, Luiz; Costa, Carlos [Companhia Hidroeletrica do Sao Francisco (CHESF), Recife, PE (Brazil)

    1995-12-31

    This work describes the development activities of the Xingo`s Control Center, since its production until its commissioning. It emphasizes the applicative programs developed by the CHESF`s, an electric power utility of Brazil (Northeast and Southeast of Brazil, team together with the furnisher`s team. The results of factory and field tests are commented 7 refs.

  14. Final priority. Rehabilitation Training: Job-Driven Vocational Rehabilitation Technical Assistance Center. Final priority.

    Science.gov (United States)

    2014-08-19

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Rehabilitation Training program to establish a Job-Driven Vocational Rehabilitation Technical Assistance Center (JDVRTAC). The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to focus on training in an area of national need. Specifically, this priority responds to the Presidential Memorandum to Federal agencies directing them to take action to address job-driven training for the Nation's workers. The JDVRTAC will provide technical assistance (TA) to State vocational rehabilitation (VR) agencies to help them develop for individuals with disabilities training and employment opportunities that meet the needs of today's employers.

  15. CARBON DIOXIDE MITIGATION THROUGH CONTROLLED PHOTOSYNTHESIS; FINAL

    International Nuclear Information System (INIS)

    Unknown

    2000-01-01

    This research was undertaken to meet the need for a robust portfolio of carbon management options to ensure continued use of coal in electrical power generation. In response to this need, the Ohio Coal Research Center at Ohio University developed a novel technique to control the emissions of CO(sub 2) from fossil-fired power plants by growing organisms capable of converting CO(sub 2) to complex sugars through the process of photosynthesis. Once harvested, the organisms could be used in the production of fertilizer, as a biomass fuel, or fermented to produce alcohols. In this work, a mesophilic organism, Nostoc 86-3, was examined with respect to the use of thermophilic algae to recycle CO(sub 2) from scrubbed stack gases. The organisms were grown on stationary surfaces to facilitate algal stability and promote light distribution. The testing done throughout the year examined properties of CO(sub 2) concentration, temperature, light intensity, and light duration on process viability and the growth of the Nostoc. The results indicate that the Nostoc species is suitable only in a temperature range below 125 F, which may be practical given flue gas cooling. Further, results indicate that high lighting levels are not suitable for this organism, as bleaching occurs and growth rates are inhibited. Similarly, the organisms do not respond well to extended lighting durations, requiring a significant (greater than eight hour) dark cycle on a consistent basis. Other results indicate a relative insensitivity to CO(sub 2) levels between 7-12% and CO levels as high as 800 ppm. Other significant results alluded to previously, relate to the development of the overall process. Two processes developed during the year offer tremendous potential to enhance process viability. First, integration of solar collection and distribution technology from Oak Ridge laboratories could provide a significant space savings and enhanced use of solar energy. Second, the use of translating slug flow

  16. Performance of Personal Workspace Controls Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Rubinstein, Francis; Kiliccote, Sila; Loffeld, John; Pettler,Pete; Snook, Joel

    2004-12-01

    One of the key deliverables for the DOE-funded controls research at LBNL for FY04 was the development of a prototype Personal Workspace Control system. The successful development of this system is a critical milestone for the LBNL Lighting Controls Research effort because this system demonstrates how IBECS can add value to today's Task Ambient lighting systems. LBNL has argued that by providing both the occupant and the facilities manager with the ability to precisely control the operation of overhead lighting and all task lighting in a coordinated manner, that task ambient lighting can optimize energy performance and occupant comfort simultaneously [Reference Task Ambient Foundation Document]. The Personal Workspace Control system is the application of IBECS to this important lighting problem. This report discusses the development of the Personal Workspace Control to date including descriptions of the different fixture types that have been converted to IBECS operation and a detailed description of the operation of PWC Scene Controller, which provides the end user with precise control of his task ambient lighting system. The objective, from the Annual Plan, is to demonstrate improvements in efficiency, lighting quality and occupant comfort realized using Personal Workspace Controls (PWC) designed to optimize the delivery of lighting to the individual's workstation regardless of which task-ambient lighting solution is chosen. The PWC will be capable of controlling floor-mounted, desk lamps, furniture-mounted and overhead lighting fixtures from a personal computer and handheld remote. The PWC will use an environmental sensor to automatically monitor illuminance, temperature and occupancy and to appropriately modulate ambient lighting according to daylight availability and to switch off task lighting according to local occupancy. [Adding occupancy control to the system would blunt the historical criticism of occupant-controlled lighting - the tendency of the

  17. Final report on the FMIT Control System

    International Nuclear Information System (INIS)

    Johnson, J.A.

    1985-01-01

    The computer control system for the Fusion Materials Irradiation Test Facility (FMIT) prototype accelerator was designed using distributed intelligence driven by a distributed database. The system consists of two minicomputers in the central control room and four microcomputers residing in CAMAC crates located near appropriate subsystems of the accelerator. The system uses single vendor hardware as much as practical in an attempt to minimize the maintenance problems. Local control consoles are an integral part of each node computer to provide subsystem check-out. The main console is located in the central control room and permits one-point operation of the complete control system. Automatic surveillance is provided for each data channel by the node computer with out-of-bounds alarms sent to the main console. Report by exception is used for data logging. This control system has been operational for two years. The computers are too heavily loaded and the operator response is slower than desired. A system upgrade to a faster local-area network has been undertaken and is scheduled to be operational by conference time

  18. After School Centers Project. Final Reports. Winter 1968-1969; Summer 1969.

    Science.gov (United States)

    Harvard Univ., Cambridge, MA. Graduate School of Education.

    Two final reports, winter 1968-1969 and summer 1969, respectively describe the sixth and seventh sessions of the Cambridge School Department's After School Center Program and involving six elementary schools. Both the winter and the summer programs were designed to give disadvantaged children remedial instruction in reading and mathematics along…

  19. 75 FR 26272 - Final Environmental Impact Statement; Environmental Education Center, Yosemite National Park...

    Science.gov (United States)

    2010-05-11

    ... DEPARTMENT OF THE INTERIOR National Park Service Final Environmental Impact Statement; Environmental Education Center, Yosemite National Park, Mariposa County, CA; Notice of Approval of Record of Decision SUMMARY: Pursuant to Sec. 102(2)(C) of the National Environmental Policy Act of 1969 (Pub. L. 91...

  20. Precision control of biogas plants. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, H.B.; Nielsen, Anders M.; Ward, A.J.

    2009-10-15

    The objective of the project has been to improve design and process stability in biogas plants. The results can be divided within the following main categories: 1) Pre-treatment, serial coupling of digesters and post digestion 2) Process inhibition 3) Process control Ad 1) This work has shown that extreme thermophilic pre-treatment of cattle manure and pig manure mixed with silage has a considerable effect on methane yield in a subsequent methanogenic reactor. Ad 2) The effect of ammonia inhibition was studied in a series of continuously stirred tank reactors co-digesting pig manure (40%) with the addition of solid fractions (60%) and increasing concentrations of ammonia caused by addition of NH{sub 4}Cl pulses. Ad 3) Near infrared spectroscopy (NIRS) was used to predict liquid phase volatile fatty acid (VFA) concentrations in three experiments treating three different materials: pig slurry with maize silage, chicken manure and cattle slurry.

  1. VOC Control in Kraft Mills; FINAL

    International Nuclear Information System (INIS)

    Zhu, J.Y.; Chai, X.-S.; Edwards, L.L.; Gu, Y.; Teja, A.S.; Kirkman, A.G.; Pfromm, P.H.; Rezac, M.E.

    2001-01-01

    The formation of volatile organic compounds (VOCs), such as methanol, in kraft mills has been an environmental concern. Methanol is soluble in water and can increase the biochemical oxygen demand. Furthermore, it can also be released into atmosphere at the process temperatures of kraft mill-streams. The Cluster Rule of the EPA now requires the control of the release of methanol in pulp and paper mills. This research program was conducted to develop a computer simulation tool for mills to predict VOC air emissions. To achieve the objective of the research program, much effort was made in the development of analytical techniques for the analysis of VOC and determination of vapor liquid partitioning coefficient of VOCs in kraft mill-streams using headspace gas chromatography. With the developed analytical tool, methanol formation in alkaline pulping was studied in laboratory to provide benchmark data of the amount of methanol formation in pulping in kraft mills and for the validation of VOC formation and vapor-liquid equilibrium submodels. Several millwide air and liquid samplings were conducted using the analytical tools developed to validate the simulation tool. The VOC predictive simulation model was developed based on the basic chemical engineering concepts, i.e., reaction kinetics, vapor liquid equilibrium, combined with computerized mass and energy balances. Four kraft mill case studies (a continuous digester, two brownstock washing lines, and a pre-evaporator system) are presented and compared with mill measurements. These case studies provide valuable, technical information for issues related to MACT I and MACT II compliance, such as condensate collection and Clean-Condensate-Alternatives (CCA)

  2. RoboCon: A general purpose telerobotic control center

    International Nuclear Information System (INIS)

    Draper, J.V.; Noakes, M.W.; Blair, L.M.

    1997-01-01

    This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices

  3. RoboCon: A general purpose telerobotic control center

    Energy Technology Data Exchange (ETDEWEB)

    Draper, J.V.; Noakes, M.W. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Schempf, H. [Carnegie Mellon Univ., Pittsburgh, PA (United States); Blair, L.M. [Human Machine Interfaces, Inc., Knoxville, TN (United States)

    1997-02-01

    This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices.

  4. A control center design revisited: learning from users’ appropriation

    DEFF Research Database (Denmark)

    Souza da Conceição, Carolina; Cordeiro, Cláudia

    2014-01-01

    This paper aims to present the lessons learned during a control center design project by revisiting another control center from the same company designed two and a half years before by the same project team. In light of the experience with the first project and its analysis, the designers and res...

  5. Customizing graphical user interface technology for spacecraft control centers

    Science.gov (United States)

    Beach, Edward; Giancola, Peter; Gibson, Steven; Mahmot, Ronald

    1993-01-01

    The Transportable Payload Operations Control Center (TPOCC) project is applying the latest in graphical user interface technology to the spacecraft control center environment. This project of the Mission Operations Division's (MOD) Control Center Systems Branch (CCSB) at NASA Goddard Space Flight Center (GSFC) has developed an architecture for control centers which makes use of a distributed processing approach and the latest in Unix workstation technology. The TPOCC project is committed to following industry standards and using commercial off-the-shelf (COTS) hardware and software components wherever possible to reduce development costs and to improve operational support. TPOCC's most successful use of commercial software products and standards has been in the development of its graphical user interface. This paper describes TPOCC's successful use and customization of four separate layers of commercial software products to create a flexible and powerful user interface that is uniquely suited to spacecraft monitoring and control.

  6. 46 CFR 111.70-3 - Motor controllers and motor-control centers.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Motor controllers and motor-control centers. 111.70-3... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Motor Circuits, Controllers, and Protection § 111.70-3 Motor controllers and motor-control centers. (a) General. The enclosure for each motor controller or motor-control...

  7. ORNL's Controlled Fusion Atomic Data Center

    International Nuclear Information System (INIS)

    Barnett, C.F.; Gregory, D.C.

    1983-01-01

    The Data Center maintains a detailed bibliography of atomic data measurements and calculations for processes of interest to the fusion community. One hundred nineteen journals are regularly searched for papers of interest, including back issues to 1950. Entries are categorized by author, process, reactants, energy range, and theory/experiment. Complete bibliographies have been published since 1978 and a computerized data retrieval system is available. In addition, an updated and extended multi-volume critical compilation of cross sections (the ORNL Redbooks) is under way

  8. B Complex Test Control Center (TCC) #4210

    Data.gov (United States)

    Federal Laboratory Consortium — The TCC is a dual control room facility for the B-1 and B-2 Test Positions on the B-Stand. The TCC houses continually-updated, state-of-the-art Data Acquisition and...

  9. Learner-Centered Instruction (LCI): Volume 7. Evaluation of the LCI Approach. Final Report.

    Science.gov (United States)

    Pieper, William J.; And Others

    An evaluation of the learner-centered instruction (LCI) approach to training was conducted by comparing the LCI F-111A weapons control systems mechanic/technician course with the conventional Air Force course for the same Air Force specialty code (AFSC) on the following dimensions; job performance of course graduates, man-hour and dollar costs of…

  10. DOE Center of Excellence in Medical Laser Applications. Final report, December 1, 1994--November 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Jacques, S.L.

    1998-01-01

    An engineering network of collaborating medical laser laboratories are developing laser and optical technologies for medical diagnosis and therapy and are translating the engineering into medical centers in Portland OR, Houston TX, and Galveston TX. The Center includes the University of Texas M.D. Anderson Cancer Center, the University of Texas-Austin, Texas A and M University, Rice University, the University Texas Medical Branch-Galveston, Oregon Medical Laser Center (Providence St. Vincent Medical Center, Oregon Health Sciences University, and Oregon Graduate Institute, Portland, OR), and the University of Oregon. Diagnostics include reflectance, fluorescence, Raman IR, laser photoacoustics, optical coherence tomography, and several new video techniques for spectroscopy and imaging. Therapies include photocoagulation therapy, laser welding, pulsed laser ablation, and light-activated chemotherapy of cancer (photodynamic therapy, or PDT). Medical applications reaching the clinic include optical monitoring of hyperbilirubinemia in newborns, fluorescence detection of cervical dysplasia, laser thrombolysis of blood clots in heart attack and brain stroke, photothermal coagulant of benign prostate hyperplasia, and PDT for both veterinary and human cancer. New technologies include laser optoacoustic imaging of breast tumors and hemorrhage in head trauma and brain stroke, quality control monitoring of dosimetry during PDT for esophageal and lung cancer, polarization video reflectometry of skin cancer, laser welding of artificial tissue replacements, and feedback control of laser welding.

  11. American Association of Poison Control Centers

    Science.gov (United States)

    ... add poison control as a contact in your smartphone. Take the pledge! National Poison Prevention Week is March 19-25! Be a part of the conversation by following #PreventPoison and #NPPW2017 on social media, and check out AAPCC's NPPW webpage and press ...

  12. Training Center for Industrial Control Systems

    Directory of Open Access Journals (Sweden)

    V. D. Yezhov

    2013-01-01

    Full Text Available We consider the application of embedded microcontrollers and industrial controllers with built-in operating systems.With the development of embedded operating systems and technology of open standard IEC 61131-3 product developer can write their own program management and support staff – to modernize management program.

  13. FINAL IMPLEMENTATION AND PERFORMANCE OF THE LHC COLLIMATOR CONTROL SYSTEM

    CERN Document Server

    Redaelli, S; Masi, A; Losito, R

    2009-01-01

    The 2008 collimation system of the CERN Large Hadron Collider (LHC) included 80 movable collimators for a total of 316 degrees of freedom. Before beam operation, the final controls implementation was deployed and commissioned. The control system enabled remote control and appropriate diagnostics of the relevant parameters. The collimator motion is driven with time-functions, synchronized with other accelerator systems, which allows controlling the collimator jaw positions with a micrometer accuracy during all machine phases. The machine protection functionality of the system, which also relies on function-based tolerance windows, was also fully validated. The collimator control challenges are reviewed and the final system architecture is presented. The results of the remote system commissioning and the overall performance are discussed.

  14. 75 FR 30409 - Centers for Disease Control and Prevention

    Science.gov (United States)

    2010-06-01

    ... applications received in response to ``Workplace Health Research Network (WHRN)--Coordinating Center, SIP 10-031 and WHRN--Collaborating Centers, SIP 10-032, initial review.'' Contact Person for More Information..., Disability, and Injury Prevention and Control Special Interest Projects (SIPs): Workplace Health Research...

  15. The Air Force Center for Optimal Design and Control

    National Research Council Canada - National Science Library

    Burns, John

    1997-01-01

    This report contains a summary and highlights of the research funded by the Air Force under AFOSR URI Grant F49620-93-1-0280, titled 'Center for Optimal Design and Control of Distributed Parameter Systems' (CODAC...

  16. Alarm management in TRANSPETRO National Oil Control Center

    Energy Technology Data Exchange (ETDEWEB)

    Amado, Helio; Costa, Luciano [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    For sure Alarm Management is not a new issue. EEMUA 191 has been around since 1999 and everyone has received visits from consultants in this area. Besides this regulators have requested that operators have a policy for it. However there are few papers showing actual pipeline operator experience in alarm management. In this paper we present the work developed in TRANSPETRO National Oil Control Center since 2006, where we operate 5509 km of crude oil and refined products pipelines. Since the beginning of the centralized operation in 2002, alarm management has been a concern but a systematic approach has been taken since 2006. Initially we will make a brief revision of the literature and show trends for regulations. Then we will show the tools and the approach we have taken. Finally, the further developments we see. The point that we want to discuss is that, it has been very difficult to implement the system in a linear way and we believe that companies that have huge legacy systems, the same probably will occur. Putting in simple words, our main conclusion is: Implementing an Alarm Management policy produces good results however probably sometimes is better not to follow strictly the traditional steps. (author)

  17. Computer-aided dispatch--traffic management center field operational test final detailed test plan : WSDOT deployment

    Science.gov (United States)

    2003-10-01

    The purpose of this document is to expand upon the evaluation components presented in "Computer-aided dispatch--traffic management center field operational test final evaluation plan : WSDOT deployment". This document defines the objective, approach,...

  18. Computer-aided dispatch--traffic management center field operational test final test plans : state of Utah

    Science.gov (United States)

    2004-01-01

    The purpose of this document is to expand upon the evaluation components presented in "Computer-aided dispatch--traffic management center field operational test final evaluation plan : state of Utah". This document defines the objective, approach, an...

  19. The Effectiveness of Yoga on Spiritual Intelligence in Air Traffic Controllers of Tehran Flight Control Center

    Science.gov (United States)

    Safara, Maryam; Ghasemi, Pejman

    2017-01-01

    The aim of this study was to evaluate the efficacy of yoga on spiritual intelligence in air traffic controllers in Tehran flight control center. This was a quasi-experimental research and the study population includes all air traffic controllers in Tehran flight control center. The sample consisted of 40 people of the study population that were…

  20. New Emergency control center of Slovenske Elektrarne Bohunice NPP

    International Nuclear Information System (INIS)

    Pecko, E.

    2012-01-01

    Emergency preparedness of nuclear power plant and operation assurance in case of a possible emergency calls to have devices for emergency response with equipment for rapid detection and continuous evaluation of anticipated events. Chief executive body designated to manage a nuclear power plant during major events is the emergency committee (EC). Emergency Committee is a part of the Emergency Response Organization (ERO). The following centers are on alert to ensure the activities of the ERO - Emergency Response office: - control room (CR) and emergency control room (ECR); - emergency management center (EMC); - Monitoring Centre (MC); - emergency backup control center (EBCC); - congregations of civil protection (CP) and CP shelters; - communications with warning and notification system (VARVYR). From a historical and practical point of view in the vicinity of Jaslovske Bohunice has been set up a joint emergency control center. The center was located on the territory of the former already inoperative V1 NPP. V1 NPP is currently integrated into the organizational structure of JAVYS. Operating Bohunice V2 NPP plant is a designated part of the Slovenske Elektrarne, a. s., whose majority owner is an Italian operator ENEL. In terms of various relevant factors, it was decided to build a new emergency management center on the territory of operating V2 NPP, meet the current standards.

  1. The final word. OSHA's final ruling offers firm deadlines for infection control.

    Science.gov (United States)

    West, K

    1992-03-01

    Departments that have put off program development while waiting for the final ruling to be published have a lot of work to do. Many departments have been cited and fined by OSHA in the past year for failure to begin infection-control programs or provide hepatitis-B vaccines to personnel. Under the new budget, OSHA was granted permission to up its fine structure sevenfold--thus, a small fine is $7,000, and the highest fine for a single violation is $70,000. Fines can have a greater impact on a department's budget than implementation of the program over time. A key point to remember is that a strong infection-control program will reduce exposure follow-up costs and worker-compensation claims. Infection control is a win-win situation.

  2. Final Technical Report - SciDAC Cooperative Agreement: Center for Wave Interactions with Magnetohydrodynamics

    International Nuclear Information System (INIS)

    Schnack, Dalton D.

    2012-01-01

    Final technical report for research performed by Dr. Thomas G. Jenkins in collaboration with Professor Dalton D. Schnack on SciDAC Cooperative Agreement: Center for Wave Interactions with Magnetohydrodyanics, DE-FC02-06ER54899, for the period of 8/15/06 - 8/14/11. This report centers on the Slow MHD physics campaign work performed by Dr. Jenkins while at UW-Madison and then at Tech-X Corporation. To make progress on the problem of RF induced currents affect magnetic island evolution in toroidal plasmas, a set of research approaches are outlined. Three approaches can be addressed in parallel. These are: (1) Analytically prescribed additional term in Ohm's law to model the effect of localized ECCD current drive; (2) Introduce an additional evolution equation for the Ohm's law source term. Establish a RF source 'box' where information from the RF code couples to the fluid evolution; and (3) Carry out a more rigorous analytic calculation treating the additional RF terms in a closure problem. These approaches rely on the necessity of reinvigorating the computation modeling efforts of resistive and neoclassical tearing modes with present day versions of the numerical tools. For the RF community, the relevant action item is - RF ray tracing codes need to be modified so that general three-dimensional spatial information can be obtained. Further, interface efforts between the two codes require work as well as an assessment as to the numerical stability properties of the procedures to be used.

  3. Final Report Feasibility Study for the California Wave Energy Test Center (CalWavesm)

    Energy Technology Data Exchange (ETDEWEB)

    Blakeslee, Samuel Norman [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States). Inst. for Advanced Technology and Public Policy; Toman, William I. [Protean Wave Energy Ltd., Los Osos, CA (United States); Williams, Richard B. [Leidos Maritime Solutions, Reston, VA (United States); Davy, Douglas M. [CH2M, Sacramento, CA (United States); West, Anna [Kearns and West, Inc., San Francisco, CA (United States); Connet, Randy M. [Omega Power Engineers, LLC, Anaheim, CA (United States); Thompson, Janet [Kearns and West, Inc., San Francisco, CA (United States); Dolan, Dale [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Baltimore, Craig [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Jacobson, Paul [Electric Power Research Inst. (EPRI), Knoxville, TN (United States); Hagerman, George [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Potter, Chris [California Natural Resources Agency, Sacramento, CA (United States); Dooher, Brendan [Pacific Gas and Electric Company, San Francisco, CA (United States); Wendt, Dean [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States); Sheppard, Colin [Humboldt State Univ., Arcata, CA (United States); Harris, Andrew [Humboldt State Univ., Arcata, CA (United States); Lawson, W. Graham [Power Delivery Consultants, Inc., Albany, NY (United States)

    2017-07-31

    The California Wave Energy Test Center (CalWave) Feasibility Study project was funded over multiple phases by the Department of Energy to perform an interdisciplinary feasibility assessment to analyze the engineering, permitting, and stakeholder requirements to establish an open water, fully energetic, grid connected, wave energy test center off the coast of California for the purposes of advancing U.S. wave energy research, development, and testing capabilities. Work under this grant included wave energy resource characterization, grid impact and interconnection requirements, port infrastructure and maritime industry capability/suitability to accommodate the industry at research, demonstration and commercial scale, and macro and micro siting considerations. CalWave Phase I performed a macro-siting and down-selection process focusing on two potential test sites in California: Humboldt Bay and Vandenberg Air Force Base. This work resulted in the Vandenberg Air Force Base site being chosen as the most favorable site based on a peer reviewed criteria matrix. CalWave Phase II focused on four siting location alternatives along the Vandenberg Air Force Base coastline and culminated with a final siting down-selection. Key outcomes from this work include completion of preliminary engineering and systems integration work, a robust turnkey cost estimate, shoreside and subsea hazards assessment, storm wave analysis, lessons learned reports from several maritime disciplines, test center benchmarking as compared to existing international test sites, analysis of existing applicable environmental literature, the completion of a preliminary regulatory, permitting and licensing roadmap, robust interaction and engagement with state and federal regulatory agency personnel and local stakeholders, and the population of a Draft Federal Energy Regulatory Commission (FERC) Preliminary Application Document (PAD). Analysis of existing offshore oil and gas infrastructure was also performed

  4. Final priority; National Institute on Disability and Rehabilitation Research--Disability and Rehabilitation Projects and Centers Program--Rehabilitation Engineering Research Centers. Final priority.

    Science.gov (United States)

    2013-06-19

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority for a Rehabilitation Engineering Research Center (RERC) on Technologies to Support Successful Aging with Disability under the Disability and Rehabilitation Research Projects and Centers Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). The Assistant Secretary may use this priority for a competition in fiscal year (FY) 2013 and later years. We take this action to focus research attention on areas of national need. We intend to use this priority to improve outcomes for individuals with disabilities.

  5. Final priority; National Institute on Disability and Rehabilitation Research--Disability and Rehabilitation Research Projects and Centers Program--Rehabilitation Engineering Research Centers. Final priority.

    Science.gov (United States)

    2013-06-14

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority for a Rehabilitation Engineering Research Center (RERC) on Universal Interfaces and Information Technology Access under the Disability and Rehabilitation Research Projects and Centers Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). The Assistant Secretary may use this priority for a competition in fiscal year (FY) 2013 and later years. We take this action to focus research attention on areas of national need. We intend to use this priority to improve outcomes for individuals with disabilities.

  6. MOD control center automated information systems security evolution

    Science.gov (United States)

    Owen, Rich

    1991-01-01

    The role of the technology infusion process in future Control Center Automated Information Systems (AIS) is highlighted. The following subject areas are presented in the form of the viewgraphs: goals, background, threat, MOD's AISS program, TQM, SDLC integration, payback, future challenges, and bottom line.

  7. Final Treatment Center Project for Liquid and Wet Radioactive Waste in Slovakia

    International Nuclear Information System (INIS)

    Kravarik, K.; Stubna, M.; Pekar, A.; Krajc, T.; Zatkulak, M.; Holicka, Z.; Slezak, M.

    2006-01-01

    The Final Treatment Center (FTC) for Mochovce nuclear power plant (NPP) is designed for treatment and final conditioning of radioactive liquid and wet waste produced from plant operation. Mochovce NNP uses a Russian VVER-440 type reactor. Treated wastes comprise radioactive concentrates, spent resin and sludge. VUJE Inc. as an experienced company in field of treatment of radioactive waste in Slovakia has been chosen as main contractor for technological part of FTC. This paper describes the capacity, flow chart, overall waste flow and parameters of the main components in the FTC. The initial project was submitted for approval to the Slovak Electric plc. in 2003. The design and manufacture of main components were performed in 2004 and 2005. FTC construction work started early in 2004. Initial non-radioactive testing of the system is planned for summer 2006 and then radioactive tests are to be followed. A one-year trial operation of facility is planned for completion in 2007. SE - VYZ will be operates the FTC during trial operation and after its completion. SE - VYZ is subsidiary company of Slovak Electric plc. and it is responsible for treatment with radioactive waste and spent fuel in the Slovak republic. SE - VYZ has, besides of other significant experience with operation of Jaslovske Bohunice Treatment Centre. The overall capacity of the FTC is 870 m 3 /year of concentrates and 40 m 3 /year of spent resin and sludge. Bituminization and cementation were provided as main technologies for treatment of these wastes. Treatment of concentrate is performed by bituminization. Concentrate and bitumen are metered into a thin film evaporator with rotating wiping blades. Surplus water is evaporated and concentrate salts are embedded in bitumen. Bitumen product is discharged into 200 l steel drums. Spent resin and sludge are decanted, dried and mixed with bitumen. These mixtures are also discharged into 200 l steel drums. Drums are moved along bituminization line on a roller

  8. Future applications of artificial intelligence to Mission Control Centers

    Science.gov (United States)

    Friedland, Peter

    1991-01-01

    Future applications of artificial intelligence to Mission Control Centers are presented in the form of the viewgraphs. The following subject areas are covered: basic objectives of the NASA-wide AI program; inhouse research program; constraint-based scheduling; learning and performance improvement for scheduling; GEMPLAN multi-agent planner; planning, scheduling, and control; Bayesian learning; efficient learning algorithms; ICARUS (an integrated architecture for learning); design knowledge acquisition and retention; computer-integrated documentation; and some speculation on future applications.

  9. Final priorities; National Institute on Disability and Rehabilitation Research--Disability and Rehabilitation Research Projects and Centers Program--Rehabilitation Engineering Research Centers. Final priorities.

    Science.gov (United States)

    2013-06-11

    The Assistant Secretary for Special Education and Rehabilitative Services announces priorities under the Disability and Rehabilitation Research Projects and Centers Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). Specifically, we announce priorities for a Rehabilitation Engineering Research Center (RERC) on Rehabilitation Strategies, Techniques, and Interventions (Priority 1), Information and Communication Technologies Access (Priority 2), Individual Mobility and Manipulation (Priority 3), and Physical Access and Transportation (Priority 4). The Assistant Secretary may use one or more of these priorities for competitions in fiscal year (FY) 2013 and later years. We take this action to focus research attention on areas of national need. We intend these priorities to improve community living and participation, health and function, and employment outcomes of individuals with disabilities.

  10. Improved Controls for Fusion RF Systems. Final technical report

    International Nuclear Information System (INIS)

    Casey, Jeffrey A.

    2011-01-01

    We have addressed the specific requirements for the integrated systems controlling an array of klystrons used for Lower Hybrid Current Drive (LHCD). The immediate goal for our design was to modernize the transmitter protection system (TPS) for LHCD on the Alcator C-Mod tokamak at the MIT Plasma Science and Fusion Center (MIT-PSFC). Working with the Alcator C-Mod team, we have upgraded the design of these controls to retrofit for improvements in performance and safety, as well as to facilitate the upcoming expansion from 12 to 16 klystrons. The longer range goals to generalize the designs in such a way that they will be of benefit to other programs within the international fusion effort was met by designing a system which was flexible enough to address all the MIT system requirements, and modular enough to adapt to a large variety of other requirements with minimal reconfiguration

  11. Improved Controls for Fusion RF Systems. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Casey, Jeffrey A. [Rockfield Research Inc., Las Vegas, NV (United States)

    2011-11-08

    We have addressed the specific requirements for the integrated systems controlling an array of klystrons used for Lower Hybrid Current Drive (LHCD). The immediate goal for our design was to modernize the transmitter protection system (TPS) for LHCD on the Alcator C-Mod tokamak at the MIT Plasma Science and Fusion Center (MIT-PSFC). Working with the Alcator C-Mod team, we have upgraded the design of these controls to retrofit for improvements in performance and safety, as well as to facilitate the upcoming expansion from 12 to 16 klystrons. The longer range goals to generalize the designs in such a way that they will be of benefit to other programs within the international fusion effort was met by designing a system which was flexible enough to address all the MIT system requirements, and modular enough to adapt to a large variety of other requirements with minimal reconfiguration.

  12. A source-controlled data center network model.

    Science.gov (United States)

    Yu, Yang; Liang, Mangui; Wang, Zhe

    2017-01-01

    The construction of data center network by applying SDN technology has become a hot research topic. The SDN architecture has innovatively separated the control plane from the data plane which makes the network more software-oriented and agile. Moreover, it provides virtual multi-tenancy, effective scheduling resources and centralized control strategies to meet the demand for cloud computing data center. However, the explosion of network information is facing severe challenges for SDN controller. The flow storage and lookup mechanisms based on TCAM device have led to the restriction of scalability, high cost and energy consumption. In view of this, a source-controlled data center network (SCDCN) model is proposed herein. The SCDCN model applies a new type of source routing address named the vector address (VA) as the packet-switching label. The VA completely defines the communication path and the data forwarding process can be finished solely relying on VA. There are four advantages in the SCDCN architecture. 1) The model adopts hierarchical multi-controllers and abstracts large-scale data center network into some small network domains that has solved the restriction for the processing ability of single controller and reduced the computational complexity. 2) Vector switches (VS) developed in the core network no longer apply TCAM for table storage and lookup that has significantly cut down the cost and complexity for switches. Meanwhile, the problem of scalability can be solved effectively. 3) The SCDCN model simplifies the establishment process for new flows and there is no need to download flow tables to VS. The amount of control signaling consumed when establishing new flows can be significantly decreased. 4) We design the VS on the NetFPGA platform. The statistical results show that the hardware resource consumption in a VS is about 27% of that in an OFS.

  13. A source-controlled data center network model

    Science.gov (United States)

    Yu, Yang; Liang, Mangui; Wang, Zhe

    2017-01-01

    The construction of data center network by applying SDN technology has become a hot research topic. The SDN architecture has innovatively separated the control plane from the data plane which makes the network more software-oriented and agile. Moreover, it provides virtual multi-tenancy, effective scheduling resources and centralized control strategies to meet the demand for cloud computing data center. However, the explosion of network information is facing severe challenges for SDN controller. The flow storage and lookup mechanisms based on TCAM device have led to the restriction of scalability, high cost and energy consumption. In view of this, a source-controlled data center network (SCDCN) model is proposed herein. The SCDCN model applies a new type of source routing address named the vector address (VA) as the packet-switching label. The VA completely defines the communication path and the data forwarding process can be finished solely relying on VA. There are four advantages in the SCDCN architecture. 1) The model adopts hierarchical multi-controllers and abstracts large-scale data center network into some small network domains that has solved the restriction for the processing ability of single controller and reduced the computational complexity. 2) Vector switches (VS) developed in the core network no longer apply TCAM for table storage and lookup that has significantly cut down the cost and complexity for switches. Meanwhile, the problem of scalability can be solved effectively. 3) The SCDCN model simplifies the establishment process for new flows and there is no need to download flow tables to VS. The amount of control signaling consumed when establishing new flows can be significantly decreased. 4) We design the VS on the NetFPGA platform. The statistical results show that the hardware resource consumption in a VS is about 27% of that in an OFS. PMID:28328925

  14. Solar space heating for the visitors' center, Stephens College, Columbia, Missouri. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Henley, Marion

    1980-06-01

    This document is the final report of the solar energy system located at the Visitors' Center on the Stephens College Campus, Columbia, Missouri. The system is installed in a four-story, 15,000 square foot building designed to include the college's Admission Office, nine guest rooms for overnight lodging for official guests of the college, a two-story art gallery, and a Faculty Lounge. The solar energy system is an integral design of the building and utilizes 176 Honeywell/Lennox hydronic flat-plate collectors which use a 50% water-ethylene glycol solution and water-to-water heat exchanger. Solar heated water is stored in a 5000 gallon water storage tank located in the basement equipment room. A natural gas fired hot water boiler supplies hot water when the solar energy heat supply fails to meet the demand. The designed solar contribution is 71% of the heating load. The demonstration period for this project ends June 30, 1984.

  15. A minimum attention control center for nuclear power plants

    International Nuclear Information System (INIS)

    Meijer, C.H.

    1986-01-01

    Control Centers for Nuclear Power Plants have characteristically been designed for maximum attention by the operating staffs of these plants. Consequently, the monitoring, control and diagnostics oriented cognitive activities by these staffs, were mostly ''data-driven'' in nature. This paper addresses a control center concept, under development by Combustion Engineering, that promotes a more ''information-driven'' cognitive interaction process between the operator and the plant. The more ''intelligent'' and therefore less attentive nature of such interactive process utilizes computer implemented cognitive engineered algorithms. The underlying structure of these algorithms is based upon the Critical Function/Success Path monitoring principle. The paper highlights a typical implementation of the minimum attention concept for the handling of unfamiliar safety related events. (author)

  16. Center for Extended Magnetohydrodynamic Modeling (CEMM) University of Utah SAPP 2007. Final Status Report

    International Nuclear Information System (INIS)

    Sanderson, Allen R.; Johnson, Christopher R.

    2007-01-01

    During the third and final period of this grant, our goal was to refine the algorithmic approaches used to detect and visualize magnetic islands and their corresponding null points within both the NIMROD and M3D data sets. We refined our geometric approach, which gave a greater confidence in the accuracy of the Poincareplots created. The final results are best demonstrated through Figures 2-6 attached to the report. Technical details this work was reported in both the Physics and Visualization communities. The algorithms used to analyze the magnetic field lines and detect magnetic islands have been packaged into a library and were used within the SCIRun Problem Solving Environment which is being used by members of the CEMM for visualization. In addition, the library interface was developed so that it could be used by both the NIMROD and M3D codes directly. Thus allowing the fusion scientist to perform this analysis while their simulations were actively running. The use of the library for analysis and visualization was not limited to just within the CEMM SciDAC. Other groups such as the SciDAC for the Simulation of Wave Interactions with Magnetohydrodynamics using Silo code have used the tools for the analysis of their simulations, Figure 1. Though the funding of this project had concluded there is still much work to be performed on this analysis. The techniques developed are fast and robust when not in the presence of chaos. Magnetic field lines that are near the separatrices where chaos is most often present can be difficult to analyze yet these are the field lines that are greatest interest. We believe that investigating and developing techniques based on time frequency analysis may hold some promise. Two other issues that need to be address is the ability to automatically search for the magnetic islands and the ability to track the development of the magnetic islands over time. Our initial effort into automatically searching for the islands did not prove as

  17. Positron--electron storage ring project: Stanford Linear Accelerator Center, Stanford, California. Final environmental statement

    International Nuclear Information System (INIS)

    1976-08-01

    A final environmental statement is given which was prepared in compliance with the National Environmental Policy Act to support the Energy Research and Development Administration project to design and construct the positron-electron colliding beam storage ring (PEP) facilities at the Stanford Linear Accelerator Center (SLAC). The PEP storage ring will be constructed underground adjacent to the existing two-mile long SLAC particle accelerator to utilize its beam. The ring will be about 700 meters in diameter, buried at depths of 20 to 100 feet, and located at the eastern extremity of the SLAC site. Positron and electron beams will collide in the storage ring to provide higher energies and hence higher particle velocities than have been heretofore achieved. Some of the energy from the collisions is transformed back into matter and produces a variety of particles of immense interest to physicists. The environmental impacts during the estimated two and one-half years construction period will consist of movement of an estimated 320,000 cubic yards of earth and the creation of some rubble, refuse, and dust and noise which will be kept to a practical minimum through planned construction procedures. The terrain will be restored to very nearly its original conditions. Normal operation of the storage ring facility will not produce significant adverse environmental effects different from operation of the existing facilities and the addition of one water cooling tower. No overall increase in SLAC staff is anticipated for operation of the facility. Alternatives to the proposed project that were considered include: termination, postponement, other locations and construction of a conventional high energy accelerator

  18. Solar energy grid integration systems : final report of the Florida Solar Energy Center Team.

    Energy Technology Data Exchange (ETDEWEB)

    Ropp, Michael (Northern Plains Power Technologies, Brookings, SD); Gonzalez, Sigifredo; Schaffer, Alan (Lakeland Electric Utilities, Lakeland, FL); Katz, Stanley (Satcon Technology Corporation, Boston, MA); Perkinson, Jim (Satcon Technology Corporation, Boston, MA); Bower, Ward Isaac; Prestero, Mark (Satcon Technology Corporation, Boston, MA); Casey, Leo (Satcon Technology Corporation, Boston, MA); Moaveni, Houtan (Florida Solar Energy Center of the University of Central Florida, Cocoa, FL); Click, David (Florida Solar Energy Center of the University of Central Florida, Cocoa, FL); Davis, Kristopher (Florida Solar Energy Center of the University of Central Florida, Cocoa, FL); Reedy, Robert (Florida Solar Energy Center of the University of Central Florida, Cocoa, FL); Kuszmaul, Scott S.; Sena-Henderson, Lisa; David, Carolyn; Akhil, Abbas Ali

    2012-03-01

    Initiated in 2008, the Solar Energy Grid Integration Systems (SEGIS) program is a partnership involving the U.S. DOE, Sandia National Laboratories, private sector companies, electric utilities, and universities. Projects supported under the program have focused on the complete-system development of solar technologies, with the dual goal of expanding utility-scale penetration and addressing new challenges of connecting large-scale solar installations in higher penetrations to the electric grid. The Florida Solar Energy Center (FSEC), its partners, and Sandia National Laboratories have successfully collaborated to complete the work under the third and final stage of the SEGIS initiative. The SEGIS program was a three-year, three-stage project that include conceptual design and market analysis in Stage 1, prototype development and testing in Stage 2, and moving toward commercialization in Stage 3. Under this program, the FSEC SEGIS team developed a comprehensive vision that has guided technology development that sets one methodology for merging photovoltaic (PV) and smart-grid technologies. The FSEC team's objective in the SEGIS project is to remove barriers to large-scale general integration of PV and to enhance the value proposition of photovoltaic energy by enabling PV to act as much as possible as if it were at the very least equivalent to a conventional utility power plant. It was immediately apparent that the advanced power electronics of these advanced inverters will go far beyond conventional power plants, making high penetrations of PV not just acceptable, but desirable. This report summarizes a three-year effort to develop, validate and commercialize Grid-Smart Inverters for wider photovoltaic utilization, particularly in the utility sector.

  19. Maintenance cost control at the Pacific Missile Test Center.

    OpenAIRE

    Jenson, Richard J.

    1980-01-01

    Approved for public release; distribution is unlimited The Pacific Missile Test Center (PMTC) is the Navy's largest Major Range and Test Facility Base, with an investment of over one billion dollars. The majority of this investment is in range test equipment and facilities including radar, telemetry, communication and command/ control systems. Concern is growing over the "excessively obsolete condition of PMTC technical equipment." Improvement of factors concerned with...

  20. CAMMESA control center controllers qualification; Habilitacion de operadores del centro de control de CAMMESA

    Energy Technology Data Exchange (ETDEWEB)

    Kaller, Daniel J [CAMMESA, Compania Administradora del Mercado Mayorista Electrico S.A., Buenos Aires (Argentina)

    2001-07-01

    The safety and quality of the Interconnection Argentine System (IAS) operation, basically depend on the personnel performance in the CAMMESA Operation Control Center (COC), which is the IAS maximum operative hierarchy, and whose mission is to coordinate the IAS and the dispatch of the AWEM (Argentine Wholesale Electric Market) in real time. With the goal of improving the COC controllers' qualification in order to prevent critical situations and to solve the emergences based on an efficient way, in 1999 the process of 'Habilitation of OCC Controllers' was accomplished according to the resolution number 208/98 from the Energy General Office. This technical contribution describes the executed stages and the acquired experiences when applying the mentioned procedure indicating the main found difficulties, reached results and obtained benefits.

  1. 76 FR 50202 - National Technical Assistance and Dissemination Center for Children Who Are Deaf-Blind; Final...

    Science.gov (United States)

    2011-08-12

    ... assessment, planning, placement, and services for individuals who are deaf-blind. The second goal is to... for Children Who Are Deaf-Blind; Final Extension of Project Period and Waiver AGENCY: Office of... Assistance and Dissemination Center for Children Who Are Deaf-Blind. SUMMARY: The Secretary issues this...

  2. Solar 2 Green Energy, Arts & Education Center. Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Paquette, Jamie C; Collins, Christopher J

    2011-07-18

    The Solar 2 Green Energy, Arts and Education Center is an 8,000 sq.ft. demonstration project that will be constructed to Platinum LEED certification and will be the first carbon-neutral, net-zero energy use public building in New York City, giving it local and national appeal. Employing green building features and holistic engineering practices throughout its international award-winning design, Solar 2 will be powered by a 90kW photovoltaic (PV) array in conjunction with a geothermal heating and cooling system and a high efficient design that seeks to reduce the overall energy load of the building. Solar 2 will replace our current 500 sq.ft. prototype facility - known as Solar 1 - as the educational and cultural centerpiece of a five-block public greenway on the East River in Stuyvesant Cove Park, located along two acres of public riverfront on a newly reclaimed, former brownfield in lower Manhattan. Designed as a public-use complex for year-round environmental education exhibits and onsite activities for all ages and backgrounds, Solar 2 will demonstrate energy-efficiency technologies and sustainable environmental practices available now to all urban residents, eco-tourists, teachers, and students alike. Showcasing one of Solar 2's most striking design elements is the PV roof array with a cafe and river vistas for miles of New York City's skylines. Capping the building as a solar-powered landmark, and visible from the FDR Drive, the PV array is also designed to provide visitors below a view of the solar roof when standing outside, as well as directly underneath it. Recognized by an international jury of architects, civil engineers and urban designers by the Swiss-based Holcim Foundation, the Solar 2 design was awarded the prestigious Holcim North American 2008 Gold Award for Sustainable Construction for innovative, future-oriented and tangible sustainable construction projects, selected from more than 1900 entries. Funding from the Department of Energy

  3. Aircraft Turbine Engine Control Research at NASA Glenn Research Center

    Science.gov (United States)

    Garg, Sanjay

    2014-01-01

    This lecture will provide an overview of the aircraft turbine engine control research at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC). A brief introduction to the engine control problem is first provided with a description of the current state-of-the-art control law structure. A historical aspect of engine control development since the 1940s is then provided with a special emphasis on the contributions of GRC. The traditional engine control problem has been to provide a means to safely transition the engine from one steady-state operating point to another based on the pilot throttle inputs. With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Branch (CDB) at GRC is leading and participating in various projects in partnership with other organizations within GRC and across NASA, other government agencies, the U.S. aerospace industry, and academia to develop advanced propulsion controls and diagnostics technologies that will help meet the challenging goals of NASA programs under the Aeronautics Research Mission. The second part of the lecture provides an overview of the various CDB technology development activities in aircraft engine control and diagnostics, both current and some accomplished in the recent past. The motivation for each of the research efforts, the research approach, technical challenges and the key progress to date are summarized. The technologies to be discussed include system level engine control concepts, gas path diagnostics, active component control, and distributed engine control architecture. The lecture will end with a futuristic perspective of how the various current technology developments will lead to an Intelligent and Autonomous Propulsion System requiring none to very minimum pilot interface

  4. Spacecraft control center automation using the generic inferential executor (GENIE)

    Science.gov (United States)

    Hartley, Jonathan; Luczak, Ed; Stump, Doug

    1996-01-01

    The increasing requirement to dramatically reduce the cost of mission operations led to increased emphasis on automation technology. The expert system technology used at the Goddard Space Flight Center (MD) is currently being applied to the automation of spacecraft control center activities. The generic inferential executor (GENIE) is a tool which allows pass automation applications to be constructed. The pass script templates constructed encode the tasks necessary to mimic flight operations team interactions with the spacecraft during a pass. These templates can be configured with data specific to a particular pass. Animated graphical displays illustrate the progress during the pass. The first GENIE application automates passes of the solar, anomalous and magnetospheric particle explorer (SAMPEX) spacecraft.

  5. Evaluation of completeness of selected poison control center data fields.

    Science.gov (United States)

    Jaramillo, Jeanie E; Marchbanks, Brenda; Willis, Branch; Forrester, Mathias B

    2010-08-01

    Poison control center data are used in research and surveillance. Due to the large volume of information, these efforts are dependent on data being recorded in machine readable format. However, poison center records include non-machine readable text fields and machine readable coded fields, some of which are duplicative. Duplicating this data increases the chance of inaccurate/incomplete coding. For surveillance efforts to be effective, coding should be complete and accurate. Investigators identified a convenience sample of 964 records and reviewed the substance code determining if it matched its text field. They also reviewed the coded clinical effects and treatments determining if they matched the notes text field. The substance code matched its text field for 91.4% of the substances. The clinical effects and treatments codes matched their text field for 72.6% and 82.4% of occurrences respectively. This under-reporting of clinical effects and treatments has surveillance and public health implications.

  6. ERDA nuclear energy center program. Phase I. Program definition. Final report

    International Nuclear Information System (INIS)

    1977-06-01

    This Phase I report describes the procedures used and the results obtained from a survey of SINB states and major utilities to determine their interest in participating in an ERDA-sponsored study to investigate the technical, economic, and institutional practicality of establishing a potential Nuclear Energy Center at a specific site. The State of South Carolina was the only SINB member to express positive interest in ERDA's Nuclear Energy Center Program, and to offer to submit a proposal through the SINB to select and evaluate a site in South Carolina having the potential for being developed into a Nuclear Energy Center

  7. Analysis of intentional drug poisonings using Ohio Poison Control Center Data, 2002-2014.

    Science.gov (United States)

    Pringle, Kelsey; Caupp, Sarah; Shi, Junxin; Wheeler, Krista K; Spiller, Henry A; Casavant, Marcel J; Xiang, Henry

    2017-08-01

    Pharmaceutical drug poisonings, especially those that are intentional, are a serious problem for adolescents and young adults. Poison control center data is a viable tool to track intentional drug poisonings in near real-time. To determine intentional drug poisoning rates among adolescents and young adults in Ohio using poison control center data. We analyzed data from 2002 to 2014 obtained by Ohio's three poison control centers. Inclusion variables were calls made to the centers that had appropriate subject age (10-29 years old), subject sex, involved substance (all drug classes), and medical outcome (no effect, minor effect, moderate effect, major effect, and death). Intentional drug poisoning reports were also separated into subgroups to compare suspected suicide reports to misuse and abuse reports. Finally, resident population estimates were used to generate 2014 intentional drug poisoning rates for each county in Ohio. The most common age group for intentional drug poisonings was 18-24. Females reported more suspected suicide drug poisonings while males reported more misuse/abuse drug poisonings. The most reported drug class across all ages was analgesics. Of the 88 counties in Ohio, Hamilton, Williams, Washington, and Guernsey counties had the highest rates of intentional drug poisonings. The high report rate of suspected suicides and analgesic class drugs demonstrates the need for preventative measures for adolescents and young adults in Ohio. Any interventions, along with legislative changes, will need to take place in our local communities.

  8. Combustion energy frontier research center (CEFRC) final report (August 1, 2009 – July 31, 2016)

    Energy Technology Data Exchange (ETDEWEB)

    Law, Chung [Princeton Univ., NJ (United States)

    2017-05-05

    The Combustion Energy Frontier Research Center (CEFRC) was established to tackle the single overarching grand challenge of energy sustainability, energy security and global warming: to develop a “validated, predictive, multi-scale, combustion modeling capability to optimize the design and operation of evolving fuels in advanced engines for transportation applications,” as identified in the DOE report on “Basic Energy Needs for Clean and Efficient Combustion of 21st Century Transportation Fuels”. The challenge is particularly daunting since energy conversion efficiencies and exhaust emissions are governed by coupled chemical and transport processes at multiple length scales ranging from electron excitation to molecular rearrangements to nanoscale particulate formation to turbulent fuel/air mixing. To tackle this challenge, the CEFRC assembled a world-class team of 15 principal investigators, with the objectives to: 1) develop and test theoretical models to predict elementary reaction rates, molecule thermalization rates, chemical bond dissociation energies, and nonequilibrium transport properties using quantum chemistry calculations that account for strong electron correlation and multiple electronic potential energy surfaces; 2) develop automated kinetic mechanism generation, reduction, and error control methods for predicting alternative fuel including biofuel oxidation, fuel droplet decomposition, and NOx and particulate formation; 3) validate and improve the predictions of these models by measuring ignition delay times, species profiles, flame structures, burning limits, turbulence-kinetic coupling, and NOx and soot emissions at high-pressures and near-limit conditions, by using advanced experimental diagnostic techniques including multiple laser techniques, molecular beam sampling and synchrotron photoionization, and by conducting the measurements in high-pressure shock tubes, jet-stirred and flow reactors, flame bombs, counterflow flames, and advanced

  9. 77 FR 41391 - Final Priority; Rehabilitation Research and Training Center on Vocational Rehabilitation and...

    Science.gov (United States)

    2012-07-13

    ... Assistance Network, including Regional Technical Assistance and Continuing Education (TACE) Centers to... inclusion and integration into society, employment, independent living, family support, and economic and.... Changes: None. Comment: The commenter asked how NIDRR distinguishes between research and development...

  10. Final Report for the Center for Momentum Transport and Flow Organization (CMTFO)

    Energy Technology Data Exchange (ETDEWEB)

    Tynan, George R. [Univ. of California, San Diego, CA (United States)

    2018-01-25

    The Center for Momentum Transport and Flow Organization (CMTFO) was established in 2009 as a multi-institutional U.S. DOE Plasma Science Center, with a focus on the fundamental physics mechanisms that lead to the transport of momentum within fusion and astrophysical plasma systems, and the subsequent formation of ordered behavior in such systems. It was funded in two tranches; this report covers the activities supported by the second period of funding which ran from May 2012 through May 2016.

  11. DOE SciDAC's Earth System Grid Center for Enabling Technologies Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-09-27

    The mission of the Earth System Grid Federation (ESGF) is to provide the worldwide climate-research community with access to the data, information, model codes, analysis tools, and intercomparison capabilities required to make sense of enormous climate data sets. Its specific goals are to (1) provide an easy-to-use and secure web-based data access environment for data sets; (2) add value to individual data sets by presenting them in the context of other data sets and tools for comparative analysis; (3) address the specific requirements of participating organizations with respect to bandwidth, access restrictions, and replication; (4) ensure that the data are readily accessible through the analysis and visualization tools used by the climate research community; and (5) transfer infrastructure advances to other domain areas. For the ESGF, the U.S. Department of Energy's (DOE's) Earth System Grid Center for Enabling Technologies (ESG-CET) team has led international development and delivered a production environment for managing and accessing ultra-scale climate data. This production environment includes multiple national and international climate projects (such as the Community Earth System Model and the Coupled Model Intercomparison Project), ocean model data (such as the Parallel Ocean Program), observation data (Atmospheric Radiation Measurement Best Estimate, Carbon Dioxide Information and Analysis Center, Atmospheric Infrared Sounder, etc.), and analysis and visualization tools, all serving a diverse user community. These data holdings and services are distributed across multiple ESG-CET sites (such as ANL, LANL, LBNL/NERSC, LLNL/PCMDI, NCAR, and ORNL) and at unfunded partner sites, such as the Australian National University National Computational Infrastructure, the British Atmospheric Data Centre, the National Oceanic and Atmospheric Administration Geophysical Fluid Dynamics Laboratory, the Max Planck Institute for Meteorology, the German Climate

  12. Intelligent Control of Micro Grid: A Big Data-Based Control Center

    Science.gov (United States)

    Liu, Lu; Wang, Yanping; Liu, Li; Wang, Zhiseng

    2018-01-01

    In this paper, a structure of micro grid system with big data-based control center is introduced. Energy data from distributed generation, storage and load are analized through the control center, and from the results new trends will be predicted and applied as a feedback to optimize the control. Therefore, each step proceeded in micro grid can be adjusted and orgnized in a form of comprehensive management. A framework of real-time data collection, data processing and data analysis will be proposed by employing big data technology. Consequently, a integrated distributed generation and a optimized energy storage and transmission process can be implemented in the micro grid system.

  13. Center for Fuel Cell Research and Applications development phase. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    The deployment and operation of clean power generation is becoming critical as the energy and transportation sectors seek ways to comply with clean air standards and the national deregulation of the utility industry. However, for strategic business decisions, considerable analysis is required over the next few years to evaluate the appropriate application and value added from this emerging technology. To this end the Houston Advanced Research Center (HARC) is proposing a three-year industry-driven project that centers on the creation of ``The Center for Fuel Cell Research and Applications.`` A collaborative laboratory housed at and managed by HARC, the Center will enable a core group of six diverse participating companies--industry participants--to investigate the economic and operational feasibility of proton-exchange-membrane (PEM) fuel cells in a variety of applications (the core project). This document describes the unique benefits of a collaborative approach to PEM applied research, among them a shared laboratory concept leading to cost savings and shared risks as well as access to outstanding research talent and lab facilities. It also describes the benefits provided by implementing the project at HARC, with particular emphasis on HARC`s history of managing successful long-term research projects as well as its experience in dealing with industry consortia projects. The Center is also unique in that it will not duplicate the traditional university role of basic research or that of the fuel cell industry in developing commercial products. Instead, the Center will focus on applications, testing, and demonstration of fuel cell technology.

  14. Biomedical Computing Technology Information Center (BCTIC): Final progress report, March 1, 1986-September 30, 1986

    International Nuclear Information System (INIS)

    1987-01-01

    During this time, BCTIC packaged and disseminated computing technology and honored all requests made before September 1, 1986. The final month of operation was devoted to completing code requests, returning submitted codes, and sending out notices of BCTIC's termination of services on September 30th. Final BCTIC library listings were distributed to members of the active mailing list. Also included in the library listing are names and addresses of program authors and contributors in order that users may have continued support of their programs. The BCTIC library list is attached

  15. Is function-based control room design human-centered?

    International Nuclear Information System (INIS)

    Norros, L.; Savioja, P.

    2006-01-01

    Function-based approaches to system interface design appears an appealing possibility in helping designers and operators to cope with the vast amount of information needed to control complex processes. In this paper we provide evidence of operator performance analyses showing that outcome-centered performance measures may not be sufficiently informative for design. We need analyses indicating habitual patterns of using information, operator practices. We argue that practices that portray functional orienting to the task support mastery of the process. They also create potential to make use of function-based information presentation. We see that functional design is not an absolute value. Instead, such design should support communication of the functional significance of the process information to the operators in variable situations. Hence, it should facilitate development of practices that focus to interpreting this message. Successful function-based design facilitates putting operations into their contexts and is human-centered in an extended sense: It aids making sense in the complex, dynamic and uncertain environment. (authors)

  16. [Cocaine base paste: experience from the Montevideo Poison Control Center].

    Science.gov (United States)

    Pascale, Antonio; Negrin, Alba; Laborde, Amalia

    2010-01-01

    In Uruguay, cocaine base paste (CBP, pasta base) is a widely used form of cocaine. The aim of our study is to determine the main clinical characteristics of CBP abusers. Retrospective, single-center study of consultations at the Montevideo Poison Control Center between January 1, 2004 and December 31, 2005. One hundred and thirteen consultations were included, with an average age of 22 years (+ - 0.5 years) and a female-male sex ratio of 1:4.3. The consultations were related to drug overdose (77%), suicide attempt (16.8%), and wanting to give up CBP use (6.2%). In 48.1% the time elapsed since inhalation of CBP was less than 6 hours. Doses varied between 0.5 gr. and 25 gr. Use of other drugs at the same time, such as alcohol, marijuana or benzodiazepines, was common (51 cases). The symptoms most frequently observed were neuropsychiatric and cardiovascular, followed by respiratory symptoms. In 16.8% of patients, reason for the consultation was intentional acute ingestion of drugs, considered as a suicide attempt, occurring within a few hours of drug consumption. CBP users are mostly young males. Although clinical findings are compatible with those for cocaine abuse, euphoria is a major clinical feature in CBP abusers. The presence of respiratory symptoms reflects the complications associated with the ingestion route. Suicide attempts occurring within a few hours of CBP confirm the high prevalence of suicidal ideation reported by other authors. cocaine base paste, clinical features, suicide attempts.

  17. Safety concerns with the Centers for Disease Control opioid calculator

    Directory of Open Access Journals (Sweden)

    Fudin J

    2017-12-01

    Full Text Available Jeffrey Fudin,1–4 Mena Raouf,2 Erica L Wegrzyn,2–4 Michael E Schatman5,61Scientific and Clinical Affairs, Remitigate, LLC, Delmar, NY, USA; 2Stratton VA Medical Center, Albany, NY, USA; 3Western New England University College of Pharmacy, Springfield, MA, USA; 4Albany College of Pharmacy & Health Sciences, Albany, NY, USA; 5Research and Network Development, Boston Pain Care, Waltham, MA, USA; 6Department of Public Health & Community Medicine, Tufts University School of Medicine, Boston, MA, USAMorphine milligram equivalence (MME and other comparable acronyms have been employed in federal pain guidelines and used by policy makers to limit opioid prescribing.1–5 On March 18, 2016, the Centers for Disease Control (CDC released its Guideline for Prescribing Opioids for Chronic Pain.1 The guidelines provided 12 recommendations for “primary care clinicians prescribing opioids for chronic pain outside of active cancer treatment, palliative care, and end-of-life care”. One of the CDC recommendations states that clinicians “should avoid increasing dosage to ≥90 MME/day or carefully justify a decision to titrate dosage to ≥90 MME/day”.1

  18. Center for Momentum Transport and Flow Organization (CMTFO). Final technical report

    International Nuclear Information System (INIS)

    Tynan, George R.; Diamond, P. H.; Ji, H.; Forest, C. B.; Terry, P. W.; Munsat, T.; Brummell, N.

    2013-01-01

    The Center for Momentum Transport and Flow Organization (CMTFO) is a DOE Plasma Science Center formed in late 2009 to focus on the general principles underlying momentum transport in magnetic fusion and astrophysical systems. It is composed of funded researchers from UCSD, UW Madison, U. Colorado, PPPL. As of 2011, UCSD supported postdocs are collaborating at MIT/Columbia and UC Santa Cruz and beginning in 2012, will also be based at PPPL. In the initial startup period, the Center supported the construction of two basic experiments at PPPL and UW Madison to focus on accretion disk hydrodynamic instabilities and solar physics issues. We now have computational efforts underway focused on understanding recent experimental tests of dynamos, solar tachocline physics, intrinsic rotation in tokamak plasmas and L-H transition physics in tokamak devices. In addition, we have the basic experiments discussed above complemented by work on a basic linear plasma device at UCSD and a collaboration at the LAPD located at UCLA. We are also performing experiments on intrinsic rotation and L-H transition physics in the DIII-D, NSTX, C-Mod, HBT EP, HL-2A, and EAST tokamaks in the US and China, and expect to begin collaborations on K-STAR in the coming year. Center funds provide support to over 10 postdocs and graduate students each year, who work with 8 senior faculty and researchers at their respective institutions. The Center has sponsored a mini-conference at the APS DPP 2010 meeting, and co-sponsored the recent Festival de Theorie (2011) with the CEA in Cadarache, and will co-sponsor a Winter School in January 2012 in collaboration with the CMSO-UW Madison. Center researchers have published over 50 papers in the peer reviewed literature, and given over 10 talks at major international meetings. In addition, the Center co-PI, Professor Patrick Diamond, shared the 2011 Alfven Prize at the EPS meeting. Key scientific results from this startup period include initial simulations of the

  19. Center for Momentum Transport and Flow Organization (CMTFO). Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Tynan, George R. [University of California, San Diego, CA (United States); Diamond, P. H. [University of California, San Diego, CA (United States); Ji, H. [Princeton Plasma Physics Lab., NJ (United States); Forest, C. B. [Univ. of Wisconsin, Madison, WI (United States); Terry, P. W. [Univ. of Wisconsin, Madison, WI (United States); Munsat, T. [Univ. of Colorado, Boulder, CO (United States); Brummell, N. [Univ. of California, Santa Cruz (United States)

    2013-07-29

    The Center for Momentum Transport and Flow Organization (CMTFO) is a DOE Plasma Science Center formed in late 2009 to focus on the general principles underlying momentum transport in magnetic fusion and astrophysical systems. It is composed of funded researchers from UCSD, UW Madison, U. Colorado, PPPL. As of 2011, UCSD supported postdocs are collaborating at MIT/Columbia and UC Santa Cruz and beginning in 2012, will also be based at PPPL. In the initial startup period, the Center supported the construction of two basic experiments at PPPL and UW Madison to focus on accretion disk hydrodynamic instabilities and solar physics issues. We now have computational efforts underway focused on understanding recent experimental tests of dynamos, solar tachocline physics, intrinsic rotation in tokamak plasmas and L-H transition physics in tokamak devices. In addition, we have the basic experiments discussed above complemented by work on a basic linear plasma device at UCSD and a collaboration at the LAPD located at UCLA. We are also performing experiments on intrinsic rotation and L-H transition physics in the DIII-D, NSTX, C-Mod, HBT EP, HL-2A, and EAST tokamaks in the US and China, and expect to begin collaborations on K-STAR in the coming year. Center funds provide support to over 10 postdocs and graduate students each year, who work with 8 senior faculty and researchers at their respective institutions. The Center has sponsored a mini-conference at the APS DPP 2010 meeting, and co-sponsored the recent Festival de Theorie (2011) with the CEA in Cadarache, and will co-sponsor a Winter School in January 2012 in collaboration with the CMSO-UW Madison. Center researchers have published over 50 papers in the peer reviewed literature, and given over 10 talks at major international meetings. In addition, the Center co-PI, Professor Patrick Diamond, shared the 2011 Alfven Prize at the EPS meeting. Key scientific results from this startup period include initial simulations of the

  20. Final Technical Report for the Center for Momentum Transport and Flow Organization (CMTFO)

    Energy Technology Data Exchange (ETDEWEB)

    Forest, Cary B. [University of Wisconsin-Madison; Tynan, George R. [University of California San Diego

    2013-07-29

    The Center for Momentum Transport and Flow Organization (CMTFO) is a DOE Plasma Science Center formed in late 2009 to focus on the general principles underlying momentum transport in magnetic fusion and astrophysical systems. It is composed of funded researchers from UCSD, UW Madison, U. Colorado, PPPL. As of 2011, UCSD supported postdocs are collaborating at MIT/Columbia and UC Santa Cruz and beginning in 2012, will also be based at PPPL. In the initial startup period, the Center supported the construction of two basic experiments at PPPL and UW Madison to focus on accretion disk hydrodynamic instabilities and solar physics issues. We now have computational efforts underway focused on understanding recent experimental tests of dynamos, solar tacholine physics, intrinsic rotation in tokamak plasmas and L-H transition physics in tokamak devices. In addition, we have the basic experiments discussed above complemented by work on a basic linear plasma device at UCSD and a collaboration at the LAPD located at UCLA. We are also performing experiments on intrinsic rotation and L-H transition physics in the DIII-D, NSTX, C-Mod, HBT EP, HL-2A, and EAST tokamaks in the US and China, and expect to begin collaborations on K-STAR in the coming year. Center funds provide support to over 10 postdocs and graduate students each year, who work with 8 senior faculty and researchers at their respective institutions. The Center has sponsored a mini-conference at the APS DPP 2010 meeting, and co-sponsored the recent Festival de Theorie (2011) with the CEA in Cadarache, and will co-sponsor a Winter School in January 2012 in collaboration with the CMSO-UW Madison. Center researchers have published over 50 papers in the peer reviewed literature, and given over 10 talks at major international meetings. In addition, the Center co-PI, Professor Patrick Diamond, shared the 2011 Alfven Prize at the EPS meeting. Key scientific results from this startup period include initial simulations of the

  1. Final Report for the Intermountain Center for River Rehabilitation and Restoration (ICRRR)

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, John C. [Utah State Univ., Logan, UT (United States)

    2016-08-19

    The Intermountain Center for River Rehabilitation and Restoration (ICRRR) was created in 2006 by the Department of Watershed Sciences to help meet the challenge of reversing national trends in freshwater ecosystem degradation. The ICRRR was disbanded in 2015, and its activities were transferred to other research centers within the Department of Watershed Sciences. The mission of the ICRRR was to advance the science and practice of river restoration and environmental management and to transfer that knowledge to the public and private sectors by undertaking targeted research, teaching, and extension/outreach activities. The ICRRR had two foci: restoration practices of small streams and rehabilitation of intermediate and large rivers. The ICRRR focused its work in the western United States.

  2. Final Report for 'Center for Technology for Advanced Scientific Component Software'

    International Nuclear Information System (INIS)

    Shasharina, Svetlana

    2010-01-01

    The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

  3. Nuclear Energy Center study. Phase II. Site suitability analysis. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Fellows, W.S.; Sharp, J.M.; Benator, B.I.

    1978-06-01

    A site screening study was conducted to identify a site or sites for detailed, site-specific study as a nuclear energy center. Using technical criteria of water requirements, geotechnical constraints, and projected load center and transmission considerations as well as environmental and institutional considerations, five potential study sites in the State of South Carolina were identified, evaluated against established criteria, and ranked according to their acceptability as potential nuclear energy center study sites. Consideration of what is ''representative'' of a site as well as the ranking score was factored into site recommendations, since the site deemed easiest to license and permit may not be the most desirable site for future study of the technical and institutional feasibility and practicality of a specific site. The sites near Lake Hartwell and the Savannah River Plant (SRP) of the Department of Energy were selected as potential study sites after consideration of the above criteria. Because the Lake Hartwell site offers the opportunity to consider institutional issues which may be more representative of other possible NEC sites, it is recommended that the Lake Hartwell site be studied to establish the feasibility and practicality of the nuclear energy concept on a site-specific basis.

  4. Modification of Color Centers by Electron Bombardment: Final Report CRADA No. TC-0460-93-A

    Energy Technology Data Exchange (ETDEWEB)

    Van Bibber, Karl [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Alger, Don M. [Quali-Tech, Inc., Columbia, MO (United States)

    2000-11-30

    The purpose of the project was to: Identify those electron beam irradiation parameters most relevant to process quality and efficiency, to producing and modifying color centers in topaz. Develop and test improved radiation processing techniques, and evaluate their potential applicability to other types of semi-precious gems. Develop an optimized data base for the process and procedures for identifying and characterizing material from new and diverse sources. Transfer new processing technology to the private sector, and, until they are implemented industrially, to perform radiation dosing to partially satisfy existing excess demand. We planned to define the interaction between sample purity level, the physics of irradiation to achieve color cent-er modification on a reproducible basis and demonstration of the resulting process on a commercially viable basis. The primary deliverable was the increased knowledge base in terms of expanded understanding of the systematics of color center modification in materials, and an extensive database of electron beam parameters which would optimize the efficiency and quality of radiation processing of topaz from diverse sources. The radiation processing of these stones constitutes a deliverable to Quali-Tech by LLNL.

  5. Nuclear Energy Center study. Phase II. Site suitability analysis. Final report

    International Nuclear Information System (INIS)

    Fellows, W.S.; Sharp, J.M.; Benator, B.I.

    1978-06-01

    A site screening study was conducted to identify a site or sites for detailed, site-specific study as a nuclear energy center. Using technical criteria of water requirements, geotechnical constraints, and projected load center and transmission considerations as well as environmental and institutional considerations, five potential study sites in the State of South Carolina were identified, evaluated against established criteria, and ranked according to their acceptability as potential nuclear energy center study sites. Consideration of what is ''representative'' of a site as well as the ranking score was factored into site recommendations, since the site deemed easiest to license and permit may not be the most desirable site for future study of the technical and institutional feasibility and practicality of a specific site. The sites near Lake Hartwell and the Savannah River Plant (SRP) of the Department of Energy were selected as potential study sites after consideration of the above criteria. Because the Lake Hartwell site offers the opportunity to consider institutional issues which may be more representative of other possible NEC sites, it is recommended that the Lake Hartwell site be studied to establish the feasibility and practicality of the nuclear energy concept on a site-specific basis

  6. 77 FR 72868 - The Centers for Disease Control (CDC)/Health Resources and Services Administration (HRSA...

    Science.gov (United States)

    2012-12-06

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention The Centers for Disease Control (CDC)/Health Resources and Services Administration (HRSA) Advisory Committee on HIV, Viral... announcements of meetings and other committee management activities, for both the Centers for Disease Control...

  7. Report on the Audit of the Acquisition of the Tactical Air Operations Center/Modular Control Equipment

    Science.gov (United States)

    1991-06-06

    This is our final report on the Audit of the Acquisition of the Tactical Air Operations Center/Modular Control Equipment (TAOC/MCE) for your...matters of concern that could affect the acquisition of the TAOC/MCE. We performed the audit from March through December 1990. The audit objective was...controls related to the audit objectives. The audit was made in accordance with the Inspector General’s critical program management element approach

  8. City of Raleigh, Wilders Grove Service Center, Solid Waste Services Facility. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Cox, Robert [Jacobs Engineering, NC (United States); Black, Bill [City of Raleigh, NC (United States); Battle, Fred [City of Raleigh, NC (United States)

    2015-07-22

    Final Report for DOE Grant EE0002808. Grant award was for technology demonstration of geothermal energy systems. One of the major objectives identified for the demonstration portion of the grant was to prove the viability of Ground Source Heat Pump (GSHP) systems in significantly reducing energy usage of HVAC and domestic water heating systems compared to traditional systems. Data were monitored and conclusions drawn, including estimating payback timeframes and documenting lessons learned.

  9. Design and performance of the Georgia Tech Aquatic Center photovoltaic system. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Rohatgi, A.; Begovic, M.; Long, R.; Ropp, M.; Pregelj, A.

    1996-12-31

    A building-integrated DC PV array has been constructed on the Georgia Tech campus. The array is mounted on the roof of the Georgia Tech Aquatic Center (GTAC), site of the aquatic events during the 1996 Paralympic and Olympic Games in Atlanta. At the time of its construction, it was the world`s largest roof-mounted photovoltaic array, comprised of 2,856 modules and rates at 342 kW. This section describes the electrical and physical layout of the PV system, and the associated data acquisition system (DAS) which monitors the performance of the system and collects measurements of several important meteorological parameters.

  10. Survey of Postdoctorates at FFRDCs: Final Report [Federally Funded Research and Development Centers

    Energy Technology Data Exchange (ETDEWEB)

    Mulrow, Jeri

    2010-06-30

    The 2009 FFRDC survey collected the total number of postdocs employed by FFRDCs in the United States—categorized by source of support, citizenship, sex, and field of research—as of October 1, 2009. The universe for the 2009 GSS-FFRDC survey was the Master Government List of Federally Funded Research and Development Centers. The 2009 survey also contacted the NIH’s Intramural Research Program because it employs the largest number of postdocs in the federal government. The FFRDC survey collected data via a web instrument. Topics included the type of support the postdocs received (federal and nonfederal), their sex, citizenship, race/ethnicity, and field of research.

  11. Quality control of recycled asphaltic concrete : final report.

    Science.gov (United States)

    1982-07-01

    This study examined the variations found in recycled asphaltic concrete mix based upon plant quality control data and verification testing. The data was collected from four recycled hot-mix projects constructed in 1981. All plant control and acceptan...

  12. Pilot project for a commercial buildings Energy Analysis and Diagnostic Center (EADC) program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Capehart, B.L.

    1996-02-01

    Commercial energy use costs businesses around $70 billion annually. Many of these businesses are small and medium sized organizations that do not have the resources to help themselves, or to pay for professional engineering services to help reduce their energy costs and improve their economic competitiveness. Energy cost reduction actions with payback times of around two years could save the commercial sector 15--20%, or $10--$15 billion per year. This project was initially intended to evaluate the feasibility of performing commercial energy audits as an adjunct to the industrial audit program run by the US Department of Energy Industrial Office. This program is housed in 30 universities throughout the United States. Formerly known as Energy Analysis and Diagnostic Centers (EADC`s), the university programs are now called Industrial Assessment Centers (IAC`s) to reflect their expansion from energy use analyses to include waste and productivity analyses. The success of the EADC/IAC program in helping the manufacturing sector provides an excellent model for a similar program in the commercial buildings sector. This project has investigated using the EADC/IAC approach to performing energy audits for the commercial sector, and has determined that such an approach is feasible and cost effective.

  13. Energy conserving site design case study, Burke Center, Virginia. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    The pattern of energy consumption within a modern suburban community, Burke Center, is examined. A variety of actions that could be incorporated to reduce its future energy demands is proposed. Recommendations have been limited to those that are technically feasible today, are reasonably cost-effective, and that should generate little or no market resistance. Findings are that: of the total energy consumed by the Burke Center Community, 57% will go to off-site transportation needs; energy conserving site planning generally coincides with cost-effective site planning; water-to-air heat pumps proved to be the most efficient and cost-effective method available today in the study area for reducing heating and cooling costs in buildings; certain public services such as the collection of solid waste, mail pick-up and delivery, and other routine activities can be made more energy efficient; and the use of available water saving devices in residential and commercial buildings can reduce a community's total utility energy consumption by as much as 20%. (MCW)

  14. The role of poison control centers in CBRN incidents

    International Nuclear Information System (INIS)

    Borron, S. W.; Haynes, J.; Young, P.

    2009-01-01

    Poison Control Centers (PCCs) have historically played a limited, parallel role in management of CBRN incidents; they are frequently called for advice by the public or health care providers when such incidents occur, but in many cases are not considered an integral part of the CBRN disaster emergency response team, lacking a 'place' in the Incident Command Structure (ICS). This is unfortunate, as PCCs represent an important public health resource. The roughly 60 centers in the U.S. are available 24/7, 365 days/year. Telephones are manned by professionals, including pharmacists and nurses with additional specialized training in poisoning response. PCC medical directors are generally trained in Emergency Medicine, Pediatrics or Preventive Medicine, with subspecialty training in Medical Toxicology. Many toxicologists attend specialized training in the radiation emergency management at REAC/TS. PCCs have extensive databases for poisoning management coupled with GIS surveillance. This combination of expertise and information renders PCCs well prepared to advice on decontamination and treatment of CBRN-contaminated victims. Their toxicology expertise allows their participation in risk assessment. PCCs are highly trusted by the community, enhancing their role in risk communication. We recently initiated a program that provides guidance on activation of PCCs by the Region 6 Regional Response Team (RRT6), Co-Chaired by the US Environmental Protection Agency (EPA) and the US Coast Guard, serving as the federal component of the National Response System for the states of Arkansas, Louisiana, New Mexico, Oklahoma, and Texas. The program will be described, with emphasis on how PCCs may work within ICS.(author)

  15. Accelerating Energy Efficiency in Indian Data Centers. Final Report for Phase I Activities

    Energy Technology Data Exchange (ETDEWEB)

    Ganguly, Suprotim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Raje, Sanyukta [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kumar, Satish [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sartor, Dale [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Greenberg, Steve [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-01-01

    This report documents Phase 1 of the “Accelerating Energy Efficiency in Indian Data Centers” initiative to support the development of an energy efficiency policy framework for Indian data centers. The initiative is being led by the Confederation of Indian Industry (CII), in collaboration with Lawrence Berkeley National Laboratory (LBNL)-U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy, and under the guidance of Bureau of Energy Efficiency (BEE). It is also part of the larger Power and Energy Efficiency Working Group of the US-India Bilateral Energy Dialogue. The initiative consists of two phases: Phase 1 (November 2014 – September 2015) and Phase 2 (October 2015 – September 2016).

  16. Final report. Conceptual studies nuclear energy center Lake Hartwell, S.C., Phase III

    International Nuclear Information System (INIS)

    1981-01-01

    This document summarizes a conceptual study on the feasibility and practicality of developing a nuclear energy center (NEC) at a specific site in the SSEB region. The site selected for this conceptual study is at Lake Hartwell, South Carolina. The conceptual NEC at Lake Hartwell consists of twelve nuclear electric generating units, arranged on the site in four clusters of three units each, known as triads. The nominal distance between triads was selected as 2-1/2 miles. Each unit was assumed to be a 1250 MW(e). The total electric output of 15,000 MWe would be transmitted to five major utilities in South Carolina, North Carolina, and Georgia. The basic finding was that the concept of a NEC on the Lake Hartwell site is feasible, but further analysis of institutional issues and possible legislation would be required

  17. B-Plant Canyon Ventilation Control System Description; FINAL

    International Nuclear Information System (INIS)

    MCDANIEL, K.S.

    1999-01-01

    Project W-059 installed a new B Plant Canyon Ventilation System. Monitoring and control of the system is implemented by the Canyon Ventilation Control System (CVCS). This document describes the CVCS system components which include a Programmable Logic Controller (PLC) coupled with an Operator Interface Unit (OIU) and application software. This document also includes an Alarm Index specifying the setpoints and technical basis for system analog and digital alarms

  18. Genetic control of nitrate assimilation in Klebsiella oxytoca. Final technical report; FINAL

    International Nuclear Information System (INIS)

    Stewart, Valley J.

    2001-01-01

    Some microorganisms can use nitrate as the sole source of nitrogen for biosynthesis. This project focused on the bacterium Klebsiella oxytoca, an enterobacterium found in soil and water. Mutagenesis and molecular cloning identified the nasFEDCBA operon encoding enzymes for the uptake and reduction of nitrate and nitrite to ammonium, and the adjacent nasR regulatory gene. Analysis of nasF operon expression revealed that transcription is activated by the Ntr (general nitrogen regulation ) system in response to nitrogen limitation. Transcription antitermination control in response to nitrate and nitrite is mediated by the NasR protein. Additional work established that the NasR protein is an RNA-binding protein that interacts with nasF operon leader RNA to control transcription readthrough

  19. Southwest Center for Environmental Excellence and Opportunity Year End Report (Final Deliverable)

    Energy Technology Data Exchange (ETDEWEB)

    None

    1998-11-09

    The Southwest Center for Environmental Excellence and Opportunity (Southwest CEEO) has been in existence since October 1996 at Albuquerque Technical Vocational Institute's (TVI) South Valley Campus. The Special Project was comprised of three objectives: (1) Increasing the number of Hispanics in careers related to the environment by improving education and job training opportunities; (2) Strengthening the infrastructure of Hispanic businesses and building their capacity to participate in environmental clean-up activities and potential technology commercialization; and (3) Increasing the Hispanic community's understanding of and participation in environmental protection through improved access to information and outreach activities, paying attention to cultural and linguistic issues. The Southwest CEEO has been successful in each of the above objective areas and continues to provide valuable services to TVI and the community. The Southwest CEEO has developed a scholarship/mentorship program involving business and industry, community organizations, and TVI faculty that will be replicated by other student mentorship programs. The Southwest CEEO has awarded approximately $50,000 over the two-year program funded by the U.S. Department of Energy Oakland Operations Office. The Southwest CEEO has also developed a K-12 partnership with Albuquerque Public Schools (APS) to enhance environmental education for students and professional development for teachers. Incorporated into these student activities are experimental learning opportunities and curriculum development and/or enhancement. The Southwest CEEO has worked closely with the TVI Small Business Development Center (SBDC) to support Hispanic businesses in technology partnership activities. The Southwest CEEO in partnership the TVI SBDC has provided a large business forum and business workshops. In addition, the Southwest CEEO has developed a Technology Transfer Model that will be expanded in the future to a

  20. Reliability centered maintenance pilot system implementation 241-AP-tank farm primary ventilation system final report

    International Nuclear Information System (INIS)

    MOORE TL

    2001-01-01

    When the Hanford Site Tank Farms' mission was safe storage of radioactive waste in underground storage tanks, maintenance activities focused on time-based preventive maintenance. Tank Farms' new mission to deliver waste to a vitrification plant where the waste will be processed into a form suitable for permanent storage requires a more efficient and proactive approach to maintenance. Systems must be maintained to ensure that they are operational and available to support waste feed delivery on schedule with a minimum of unplanned outages. This report describes the Reliability Centered Maintenance (RCM) pilot system that was implemented in the 241-AP Tank Farm Primary Ventilation System under PI-ORP-009 of the contract between the U.S. Department of Energy, Office of River Protection and CH2M HILL Hanford Group Inc. (CHG). The RCM analytical techniques focus on monitoring the condition of operating systems to predict equipment failures so that maintenance activities can be completed in time to prevent or mitigate unplanned equipment outages. This approach allows maintenance activities to be managed with minimal impact on plant operations. The pilot demonstration provided an opportunity for CHG staff-training in RCM principles and tailoring of the RCM approach to the Hanford Tank Farms' unique needs. This report details the implementation of RCM on a pilot system in Tank Farms

  1. Intermediate Photovoltaic System Application Experiment. Oklahoma Center for Science and Arts. Phase II. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    This report presents the key results of the Phase II efforts for the Intermediate PV System Applications Experiment at the Oklahoma Center for Science and Arts (OCSA). This phase of the project involved fabrication, installation and integration of a nominal 140 kW flat panel PV system made up of large, square polycrystalline-silicon solar cell modules, each nominally 61 cm x 122 cm in size. The output of the PV modules, supplied by Solarex Corporation, was augmented, 1.35 to 1 at peak, by a row of glass reflectors, appropriately tilted northward. The PV system interfaces with the Oklahoma Gas and Electric Utility at the OCSA main switchgear. Any excess power generated by the system is fed into the utility under a one to one buyback arrangement. Except for a shortfall in the system output, presently suspected to be due to the poor performance of the modules, no serious problems were encountered. Certain value engineering changes implemented during construction and early operational failure events associated with the power conditioning system are also described. The system is currently undergoing extended testing and evaluation.

  2. Center for Fundamental and Applied Research in Nanostructured and Lightweight Materials. Final Technical Summary

    Energy Technology Data Exchange (ETDEWEB)

    Mullins, Michael; Rogers, Tony; King, Julia; Keith, Jason; Cornilsen, Bahne; Allen, Jeffrey; Gilbert, Ryan; Holles, Joseph

    2010-09-28

    The core projects for this DOE-sponsored Center at Michigan Tech have focused on several of the materials problems identified by the NAS. These include: new electrode materials, enhanced PEM materials, lighter and more effective bipolar plates, and improvement of the carbon used as a current carrier. This project involved fundamental and applied research in the development and testing of lightweight and nanostructured materials to be used in fuel cell applications and for chemical synthesis. The advent of new classes of materials engineered at the nanometer level can produce materials that are lightweight and have unique physical and chemical properties. The grant was used to obtain and improve the equipment infrastructure to support this research and also served to fund seven research projects. These included: 1. Development of lightweight, thermally conductive bipolar plates for improved thermal management in fuel cells; 2. Exploration of pseudomorphic nanoscale overlayer bimetallic catalysts for fuel cells; 3. Development of hybrid inorganic/organic polymer nanocomposites with improved ionic and electronic properties; 4. Development of oriented polymeric materials for membrane applications; 5. Preparation of a graphitic carbon foam current collectors; 6. The development of lightweight carbon electrodes using graphitic carbon foams for battery and fuel cell applications; and 7. Movement of water in fuel cell electrodes.

  3. Study of a conceptual nuclear energy center at Green River, Utah. Final summary report

    Energy Technology Data Exchange (ETDEWEB)

    Williams, J.T. (ed.)

    1982-09-01

    This document summarizes a conceptual study on the feasibility and practicality of developing a nuclear energy center (NEC) at a representative Western site. The site selected for this conceptual study, an area of about 50 square miles, is located 15 miles south of Green River, Utah. The conceptual NEC would consist of nine nuclear electric generating units, arranged on the site in three clusters of three reactors each (triads), separated by about 2 1/2 miles. Of the total electric output of 11,250 MWe that the NEC could produce, about 82% is assumed to be transmitted out of Utah to Colorado, New Mexico, Arizona, Nevada, and California. The technical engineering issues studied included geology and seismology, plant design, low-level radioactive waste disposal, transmission, and construction schedules and costs. Socioeconomic issues included were demographics, land use, community service needs, and fiscal impacts. Environmental considerations included terrestrial and aquatic ecology, visual impact, and secondary population impacts. Radiological issues were concerned with the safety and risks of an NEC and an on-site low-level waste facility. Institutional issues included methods of ownership, taxation, implications of energy export, and water allocation. The basic finding was that an NEC would be technically feasible, but a number of socioeconomic and institutional issues would require resolution before a Western regional NEC could be considered a viable power plant siting option.

  4. Study of a conceptual nuclear energy center at Green River, Utah. Final summary report

    International Nuclear Information System (INIS)

    Williams, J.T.

    1982-09-01

    This document summarizes a conceptual study on the feasibility and practicality of developing a nuclear energy center (NEC) at a representative Western site. The site selected for this conceptual study, an area of about 50 square miles, is located 15 miles south of Green River, Utah. The conceptual NEC would consist of nine nuclear electric generating units, arranged on the site in three clusters of three reactors each (triads), separated by about 2 1/2 miles. Of the total electric output of 11,250 MWe that the NEC could produce, about 82% is assumed to be transmitted out of Utah to Colorado, New Mexico, Arizona, Nevada, and California. The technical engineering issues studied included geology and seismology, plant design, low-level radioactive waste disposal, transmission, and construction schedules and costs. Socioeconomic issues included were demographics, land use, community service needs, and fiscal impacts. Environmental considerations included terrestrial and aquatic ecology, visual impact, and secondary population impacts. Radiological issues were concerned with the safety and risks of an NEC and an on-site low-level waste facility. Institutional issues included methods of ownership, taxation, implications of energy export, and water allocation. The basic finding was that an NEC would be technically feasible, but a number of socioeconomic and institutional issues would require resolution before a Western regional NEC could be considered a viable power plant siting option

  5. Final technical report for the Center for Catalytic Hydrocarbon Functionalization (an EFRC)

    Energy Technology Data Exchange (ETDEWEB)

    Gunnoe, Thomas Brent [Univ. of Virginia, Charlottesville, VA (United States)

    2016-11-11

    Greater than 95% of all materials produced by the chemical industry are derived from a small slate of simple hydrocarbons that are derived primarily from natural gas and petroleum, predominantly through oxygenation, C–C bond formation, halogenation or amination. Yet, current technologies for hydrocarbon conversion are typically high temperature, multi-step processes that are energy and capital intensive and result in excessive emissions (including carbon dioxide). The Center for Catalytic Hydrocarbon Functionalization (CCHF) brought together research teams with the broad coalition of skills and knowledge needed to make the fundamental advances in catalysis required for next-generation technologies to convert hydrocarbons (particularly light alkanes and methane) at high efficiency and low cost. Our new catalyst technologies offer many opportunities including enhanced utilization of natural gas in the transportation sector (via conversion to liquid fuels), more efficient generation of electricity from natural gas using direct methane fuel cells, reduced energy consumption and waste production for large petrochemical processes, and the preparation of high value molecules for use in biological/medical applications or the agricultural sector. The five year collaborative project accelerated fundamental understanding of catalyst design for the conversion of C–H bonds to functionalized products, essential to achieve the goals listed above, as evidenced by the publication of 134 manuscripts. Many of these fundamental advancements provide a foundation for potential commercialization, as evidenced by the submission of 11 patents from research support by the CCHF.

  6. Drive reinforcement neural networks for reactor control. Final report

    International Nuclear Information System (INIS)

    Williams, J.G.; Jouse, W.C.

    1995-01-01

    In view of the loss of the third year funding, the scope of the project goals has been revised. The revision in project scope no longer allows for the detailed modeling of the EBR-11 start-up task that was originally envisaged. The authors are continuing, however, to model the control of the rapid power ascent of the University of Arizona TRIGA reactor using a model-based controller and using a drive reinforcement neural network. These will be combined during the concluding period of the project into a hierarchical control architecture. In addition, the modeling of a PWR feedwater heater has continued, and an autonomous fault-tolerant software architecture for its control has been proposed

  7. Control of communicable disease; foreign--requirements for importers of nonhuman primates (NHP). Final rule.

    Science.gov (United States)

    2013-02-15

    The Centers for Disease Control and Prevention (CDC), located within the Department of Health and Human Services (HHS), is amending regulations for the importation of live nonhuman primates (NHPs) by extending existing requirements for the importation of Macaca fascicularis (cynomolgus), Chlorocebus aethiops (African green), and Macaca mulatta (rhesus) monkeys to all NHPs with the exception of the filovirus testing requirement. Filovirus testing will only be required for Old World NHPs in quarantine that have illness consistent with filovirus infection or that die for any reason other than trauma during quarantine. HHS/CDC is also finalizing a provision to reduce the frequency at which importers of cynomolgus, African green, and rhesus monkeys are required to renew their special permits (from every 180 days to every 2 years). HHS/CDC is incorporating existing guidelines into the regulations and adding new provisions to address the following: NHPs imported as part of an animal act; NHPs imported or transferred by zoological societies; the transfer of NHPs from approved laboratories; and non-live imported NHP products. Finally, HHS/CDC is also requiring that all NHPs be imported only through ports of entry where a HHS/CDC quarantine station is located.

  8. System composition and operation of exposure dose registration and control system (Final report)

    International Nuclear Information System (INIS)

    1978-01-01

    Since November, 1976, the committee concerning the investigation of exposure dose registration and control system for employees in nuclear industries has discussed on the exposure dose registration and control system, issued the interim report (outline) in April, 1977, and continued to investigate the details organizing the working group. Here, the final report is presented. It describes first on the definition of the terms used and the basic concept of the exposure dose registration and control system, in which the name of that organization is decided as ''Central Registration Office for Radiation Works'', Radiation Influence Association, the foundational juridical person. Next, the works to be performed in the Center and nuclear energy enterprises are explained. The items concerning the business management at the time of practical execution are the major part of the report, and are over 22 items. These include the registration business, the official reporting business, inquiry and answer business about career, change and revision, and computer processing system. As the temporary measures for transfer ring to the new system, 10 items are also provided. Supplementary explanation of 9 important items is given in the appendix. (Wakatsuki, Y.)

  9. Heat pump centered integrated community energy systems: system development. Georgia Institute of Technology final report

    Energy Technology Data Exchange (ETDEWEB)

    Wade, D.W.; Trammell, B.C.; Dixit, B.S.; McCurry, D.C.; Rindt, B.A.

    1979-12-01

    Heat Pump Centered-Integrated Community Energy Systems (HP-ICES) show the promise of utilizing low-grade thermal energy for low-quality energy requirements such as space heating and cooling. The Heat Pump - Wastewater Heat Recovery (HP-WHR) scheme is one approach to an HP-ICES that proposes to reclaim low-grade thermal energy from a community's wastewater effluent. This report develops the concept of an HP-WHR system, evaluates the potential performance and economics of such a system, and examines the potential for application. A thermodynamic performance analysis of a hypothetical system projects an overall system Coefficient of Performance (C.O.P.) of from 2.181 to 2.264 for waste-water temperatures varying from 50/sup 0/F to 80/sup 0/F. Primary energy source savings from the nationwide implementation of this system is projected to be 6.0 QUADS-fuel oil, or 8.5 QUADS - natural gas, or 29.7 QUADS - coal for the period 1980 to 2000, depending upon the type and mix of conventional space conditioning systems which could be displaced with the HP-WHR system. Site-specific HP-WHR system designs are presented for two application communities in Georgia. Performance analyses for these systems project annual cycle system C.O.P.'s of 2.049 and 2.519. Economic analysis on the basis of a life cycle cost comparison shows one site-specific system design to be cost competitive in the immediate market with conventional residential and light commercial HVAC systems. The second site-specific system design is shown through a similar economic analysis to be more costly than conventional systems due mainly to the current low energy costs for natural gas. It is anticipated that, as energy costs escalate, this HP-WHR system will also approach the threshold of economic viability.

  10. Center for Electrocatalysis, Transport Phenomena, and Materials (CETM) for Innovative Energy Storage - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Soloveichik, Grigorii [GE Global Research, Niskayuna, New York (United States)

    2015-11-30

    EFRC vision. The direct use of organic hydrides in fuel cells as virtual hydrogen carriers that generate stable organic molecules, protons, and electrons upon electro-oxidation and can be electrochemically charged by re-hydrogenating the oxidized carrier was the major focus of the Center for Electrocatalysis, Transport Phenomena and Materials for Innovative Energy Storage (EFRC-ETM). Compared to a hydrogen-on-demand design that includes thermal decomposition of organic hydrides in a catalytic reactor, the proposed approach is much simpler and does not require additional dehydrogenation catalysts or heat exchangers. Further, this approach utilizes the advantages of a flow battery (i.e., separation of power and energy, ease of transport and storage of liquid fuels) with fuels that have system energy densities similar to current hydrogen PEM fuel cells. EFRC challenges. Two major EFRC challenges were electrocatalysis and transport phenomena. The electrocatalysis challenge addresses fundamental processes which occur at a single molecular catalyst (microscopic level) and involve electron and proton transfer between the hydrogen rich and hydrogen depleted forms of organic liquid fuel and the catalyst. To form stable, non-radical dehydrogenation products from the organic liquid fuel, it is necessary to ensure fast transport of at least two electrons and two protons (per double bond formation). The same is true for the reverse hydrogenation reaction. The transport phenomena challenge addresses transport of electrons to/from the electrocatalyst and the current collector as well as protons across the polymer membrane. Additionally it addresses prevention of organic liquid fuel, water and oxygen transport through the PEM. In this challenge, the transport of protons or molecules involves multiple sites or a continuum (macroscopic level) and water serves as a proton conducting medium for the majority of known sulfonic acid based PEMs. Proton transfer in the presence of

  11. Alternative control technology document for bakery oven emissions. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sanford, C.W.

    1992-12-01

    The document was produced in response to a request by the baking industry for Federal guidance to assist in providing a more uniform information base for State decision-making with regard to control of bakery oven emissions. The information in the document pertains to bakeries that produce yeast-leavened bread, rolls, buns, and similar products but not crackers, sweet goods, or baked foodstuffs that are not yeast leavened. Information on the baking processes, equipment, operating parameters, potential emissions from baking, and potential emission control options are presented. Catalytic and regenerative oxidation are identified as the most appropriate existing control technologies applicable to VOC emissions from bakery ovens. Cost analyses for catalytic and regenerative oxidation are included. A predictive formula for use in estimating oven emissions has been derived from source tests done in junction with the development of the document. Its use and applicability are described.

  12. Buried waste integrated demonstration human engineered control station. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This document describes the Human Engineered Control Station (HECS) project activities including the conceptual designs. The purpose of the HECS is to enhance the effectiveness and efficiency of remote retrieval by providing an integrated remote control station. The HECS integrates human capabilities, limitations, and expectations into the design to reduce the potential for human error, provides an easy system to learn and operate, provides an increased productivity, and reduces the ultimate investment in training. The overall HECS consists of the technology interface stations, supporting engineering aids, platform (trailer), communications network (broadband system), and collision avoidance system.

  13. Buried waste integrated demonstration human engineered control station. Final report

    International Nuclear Information System (INIS)

    1994-09-01

    This document describes the Human Engineered Control Station (HECS) project activities including the conceptual designs. The purpose of the HECS is to enhance the effectiveness and efficiency of remote retrieval by providing an integrated remote control station. The HECS integrates human capabilities, limitations, and expectations into the design to reduce the potential for human error, provides an easy system to learn and operate, provides an increased productivity, and reduces the ultimate investment in training. The overall HECS consists of the technology interface stations, supporting engineering aids, platform (trailer), communications network (broadband system), and collision avoidance system

  14. Occupancy-counter-based control system. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, G.; Hoagland, L. C.; Bowman, J. K.

    1979-07-01

    Excessive mechanical ventilation of commercial and institutional buildings can result in significant waste of energy required for space heating and cooling. Ventilation rates are typically set to satisfy building design occupancy levels, in accordance with local codes, even though the building may seldom or never experience design occupancy. A method of eliminating this waste to utilize an occupancy-based ventilation control system wherein a counting device records people entering and leaving the building, to maintain a continuous record of people inventory, and to regulate mechanical ventilation control dampers to supply only that amount of ventilation air required for current occupancy levels is described. A device of this type was installed and tested in a department store in Framingham, Massachusetts and fully instrumented and operated over a 14 month period. Test results on energy usage were correlated with weather severity in order to determine the savings resulting from use of the control system. This system provided a savings of 33% in gas usage during the winter period and a savings of 23% in electricity usage during the summer period. These savings would return the installed cost of the control system in about 1 1/2 years. Projections of the performance of this system in other climatic regions (Chicago, Los Angeles, Kansas City, Miami, Minneapolis) are also presented illustrating payback periods ranging from 1/3 year in Miami to 2 2/3 years in Los Angeles. Complete details of the occupancy based ventilation control system, the test site instrumentation and data gathering procedure, the test results and their interpretation are given. (MCW)

  15. Final Technical Report: Distributed Controls for High Penetrations of Renewables

    Energy Technology Data Exchange (ETDEWEB)

    Byrne, Raymond H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neely, Jason C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rashkin, Lee J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Trudnowski, Daniel J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wilson, David G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The goal of this effort was to apply four potential control analysis/design approaches to the design of distributed grid control systems to address the impact of latency and communications uncertainty with high penetrations of photovoltaic (PV) generation. The four techniques considered were: optimal fixed structure control; Nyquist stability criterion; vector Lyapunov analysis; and Hamiltonian design methods. A reduced order model of the Western Electricity Coordinating Council (WECC) developed for the Matlab Power Systems Toolbox (PST) was employed for the study, as well as representative smaller systems (e.g., a two-area, three-area, and four-area power system). Excellent results were obtained with the optimal fixed structure approach, and the methodology we developed was published in a journal article. This approach is promising because it offers a method for designing optimal control systems with the feedback signals available from Phasor Measurement Unit (PMU) data as opposed to full state feedback or the design of an observer. The Nyquist approach inherently handles time delay and incorporates performance guarantees (e.g., gain and phase margin). We developed a technique that works for moderate sized systems, but the approach does not scale well to extremely large system because of computational complexity. The vector Lyapunov approach was applied to a two area model to demonstrate the utility for modeling communications uncertainty. Application to large power systems requires a method to automatically expand/contract the state space and partition the system so that communications uncertainty can be considered. The Hamiltonian Surface Shaping and Power Flow Control (HSSPFC) design methodology was selected to investigate grid systems for energy storage requirements to support high penetration of variable or stochastic generation (such as wind and PV) and loads. This method was applied to several small system models.

  16. NASA Armstrong Flight Research Center Dynamics and Controls Branch

    Science.gov (United States)

    Jacobson, Steve

    2015-01-01

    NASA Armstrong continues its legacy of exciting work in the area of Dynamics and Control of advanced vehicle concepts. This presentation describes Armstrongs research in control of flexible structures, peak seeking control and adaptive control in the Spring of 2015.

  17. 242-A Campaign 99-1 process control plan; FINAL

    International Nuclear Information System (INIS)

    LE, E.Q.

    1999-01-01

    242-A Evaporator 99-1 will process approximately one million gallons of waste from tank 102-AW in June 1999. The process control Plan provides a general description of activities, which will occur during 242-A Evaporator Campaign 99-1 and to document analyses conducted to demonstrate that 102-AW waste is acceptable for processing. Predict is a registered trademark of Risk Decisions England Corporation, United Kingdom

  18. Systems engineering and integration of control centers in support of multiple programs. [ground control for STS payloads and unmanned vehicles

    Science.gov (United States)

    Miller, David N.

    1989-01-01

    The NASA Johnson Space Center's new Multiprogram Control Center (MPCC) addresses the control requirements of complex STS payloads as well as unmanned vehicles. An account is given of the relationship of the MPCC to the STS Mission Control Center, with a view to significant difficulties that may be encountered and solutions thus far devised for generic problems. Examples of MPCC workstation applications encompass telemetry decommutation, engineering unit conversion, data-base management, trajectory processing, and flight design.

  19. 78 FR 33228 - Final Waiver and Extension of the Project Period for the National Dropout Prevention Center for...

    Science.gov (United States)

    2013-06-04

    ... the National Dropout Prevention Center for Students With Disabilities [Catalog of Federal Domestic... period enables the currently funded National Dropout Prevention Center for Students with Disabilities... Dropout Prevention Center for Students with Disabilities. The Center was funded under the Technical...

  20. Final Report: Phase II Nevada Water Resources Data, Modeling, and Visualization (DMV) Center

    Energy Technology Data Exchange (ETDEWEB)

    Jackman, Thomas [Desert Research Institute; Minor, Timothy [Desert Research Institute; Pohll, Gregory [Desert Research Institute

    2013-07-22

    Water is unquestionably a critical resource throughout the United States. In the semi-arid west -- an area stressed by increase in human population and sprawl of the built environment -- water is the most important limiting resource. Crucially, science must understand factors that affect availability and distribution of water. To sustain growing consumptive demand, science needs to translate understanding into reliable and robust predictions of availability under weather conditions that could be average but might be extreme. These predictions are needed to support current and long-term planning. Similar to the role of weather forecast and climate prediction, water prediction over short and long temporal scales can contribute to resource strategy, governmental policy and municipal infrastructure decisions, which are arguably tied to the natural variability and unnatural change to climate. Change in seasonal and annual temperature, precipitation, snowmelt, and runoff affect the distribution of water over large temporal and spatial scales, which impact the risk of flooding and the groundwater recharge. Anthropogenic influences and impacts increase the complexity and urgency of the challenge. The goal of this project has been to develop a decision support framework of data acquisition, digital modeling, and 3D visualization. This integrated framework consists of tools for compiling, discovering and projecting our understanding of processes that control the availability and distribution of water. The framework is intended to support the analysis of the complex interactions between processes that affect water supply, from controlled availability to either scarcity or deluge. The developed framework enables DRI to promote excellence in water resource management, particularly within the Lake Tahoe basin. In principle, this framework could be replicated for other watersheds throughout the United States. Phase II of this project builds upon the research conducted during

  1. 77 FR 58847 - Board of Scientific Counselors, National Center for Injury Prevention and Control (BSC, NCIPC)

    Science.gov (United States)

    2012-09-24

    ... the causes, diagnosis, treatment, control, and prevention of physical and mental diseases, and other... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, National Center for Injury Prevention and Control (BSC, NCIPC) In accordance with...

  2. 78 FR 29754 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

    Science.gov (United States)

    2013-05-21

    ... relating to the causes, diagnosis, treatment, control, and prevention of physical and mental diseases, and... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with...

  3. Communications and control for electric power systems: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kirkham, H.

    1998-04-01

    This report is a summary of some of the work done on the Communications and Control project, with particular emphasis on the achievements during the years 1986--1996. During those years, the project moved away from concern with dispersed storage and generation and its impact on power system operation (the team was responsible for studies in this area, and for making a power system simulator that included DSG), and became involved in more concrete work aimed at applying high-tech solutions to problems of power system communications and control. This report covers work done at JPL on the following topics: (1) the measurement of electric and magnetic fields, both ac and dc; (2) the use of optical power to supply low-power electronics; (3) the design of a fault-tolerant communication system designed for distribution automation; and (4) a digital phase locked loop that allows the use of low-power transmitting electronics to recreate a good-quality signal at the receiver. In a report of this kind, only the results and highlights of the work are described.

  4. Preventive arms control. Case study: plutonium disposition. Final report

    International Nuclear Information System (INIS)

    Liebert, W.

    2001-01-01

    Plutonium stored in separated form poses a severe threat of nuclear weapons proliferation. While options for the disposition of military plutonium stockpiles have been studied for several years, similar work has hardly been undertaken for plutonium stockpiles in the civilian sector. In the framework of this project, the various options to dispose of stockpiles of separated plutonium in the civilian sector were to be investigated. The project was embedded in the FONAS-project network on Preventive Arms Control, and the findings of this study were to be considered for the development of a concept of Preventive Arms Control. As a first step, the internationally available information on different options for plutonium disposition (MOX-use, immobilization together with radioactive wastes, elimination) were collected and compiled to allow further assessment of the different options. For some of the options, technical questions were examined in more detail. For this purpose, neutron transport and fuel burnup calculations were performed. In particular, the analysis focused on concepts for the elimination of plutonium by the use of uranium-free fuel in existing light-water reactors, since they are particularly attractive from the point of view of non-proliferation. The calculations were performed for a reference fuel based on yttrium-stabilized zirconia, with parameters like the initial plutonium content or the use of burnable neutron poisons varying. A systematic and complete analysis of the performed calculations, however, could not be undertaken due to project time restrictions. On the basis of assessment criteria for Preventive Arms Control developed by the project network, a specific set of criteria for the assessment of the pros and cons of different plutonium disposition methods has been defined. These criteria may then be used as part of a concept of prospective technology assessment. The project findings present a starting base for a comprehensive assessment of the

  5. Preventive maintenance basis: Volume 30 -- Relays -- control. Final report

    International Nuclear Information System (INIS)

    Worledge, D.; Hinchcliffe, G.

    1998-07-01

    US nuclear power plants are implementing preventive maintenance (PM) tasks with little documented basis beyond fundamental vendor information to support the tasks or their intervals. The Preventive Maintenance Basis project provides utilities with the technical basis for PM tasks and task intervals associated with 40 specific components such as valves, electric motors, pumps, and HVAC equipment. This document provides a program of preventive maintenance tasks suitable for application to control relays. The PM tasks that are recommended provide a cost-effective way to intercept the causes and mechanisms that lead to degradation and failure. They can be used in conjunction with material from other sources, to develop a complete PM program or to improve an existing program

  6. Re-Engineering the ISS Payload Operations Control Center During Increased Utilization and Critical Onboard Events

    Science.gov (United States)

    Dudley, Stephanie R. B.; Marsh, Angela L.

    2014-01-01

    With an increase in utilization and hours of payload operations being executed onboard the International Space Station (ISS), upgrading the NASA Marshall Space Flight Center (MSFC) Huntsville Operations Support Center (HOSC) ISS Payload Control Area (PCA) was essential to gaining efficiencies and assurance of current and future payload health and science return. PCA houses the Payload Operations Integration Center (POIC) responsible for the execution of all NASA payloads onboard the ISS. POIC Flight Controllers are responsible for the operation of voice, stowage, command, telemetry, video, power, thermal, and environmental control in support of ISS science experiments. The methodologies and execution of the PCA refurbishment were planned and performed within a four-month period in order to assure uninterrupted operation of ISS payloads and minimal impacts to payload operations teams. To vacate the PCA, three additional HOSC control rooms were reconfigured to handle ISS real-time operations, Backup Control Center (BCC) to Mission Control in Houston, simulations, and testing functions. This involved coordination and cooperation from teams of ISS operations controllers, multiple engineering and design disciplines, management, and construction companies performing an array of activities simultaneously and in sync delivering a final product with no issues that impacted the schedule. For each console operator discipline, studies of Information Technology (IT) tools and equipment layouts, ergonomics, and lines of sight were performed. Infusing some of the latest IT into the project was an essential goal in ensuring future growth and success of the ISS payload science returns. Engineering evaluations led to a state of the art Video Wall implementation and more efficient ethernet cabling distribution providing the latest products and the best solution for the POIC. These engineering innovations led to cost savings for the project. Constraints involved in the management of

  7. Final Technical Report - SciDAC Cooperative Agreement: Center for Extended Magnetohydrodynamic Modeling/ Transport and Dynamics in Torodial Fusion System

    International Nuclear Information System (INIS)

    Schanck, Dalton D.

    2010-01-01

    Final technical report for research performed by Professor Dalton D. Schnack on SciDAC Cooperative Agreement: Center for Extended MHD Modeling, DE-FC02-06ER54870, for the period 7/1/06 to 2/15/08. Principal results for this period are: 1. Development of a model for computational modeling for the primitive form of the extended MMD equations. This was reported as Phys. Plasmas 13, 058103 (2006). 2. Comparison between the NIMROD and M3D codes for simulation of the nonlinear sawtooth crash in the CDXU tokamak. This was reported in Phys. Plasmas 14, 056105 (2006). 3. Demonstration of 2-fluid and gyroviscous stabilization of interchange modes using computational extended MHD models. This was reported in Phys. Rev. Letters 101, 085005 (2008). Each of these publications is attached as an Appendix of this report. They should be consulted for technical details.

  8. Final Technical Report: Hawaii Hydrogen Center for Development and Deployment of Distributed Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rocheleau, Richard E.

    2008-09-30

    -efficiency CIGS and a-Si:H with operating features compatible with high-efficiency photoelectrochemical (PEC) water-splitting. The objective of one activity under the hydrogen production from biomass task was to conduct parametric testing of the Pearson gasifier and to determine the effects of gasifier operating conditions on the gas yields and quality. The hydrogen yield from this gasifier was evaluated in a parametric test series over a range of residence times from 0.8 to 2.2 seconds. H2 concentrations as high as 55% (volume) were measured in the product gas at the longer residence times and this corresponds to a hydrogen yield of 90 kg per tonne of bagasse without gas upgrading. The objective of another activity was to develop hot gas clean-up capabilities for the HNEI gasifier test facility to support hydrogen-from-biomass research. The product gas stream at the outlet of the hot gas filter was characterized for concentrations of permanent gas species and contaminants. Biomass feedstock processing activity included a preliminary investigation into methods for processing sugar cane trash at the Puunene Sugar Factory on the island of Maui, Hawaii. The objective of the investigation was to explore treatment methods that would enable the successful use of cane trash as fuel for the production of hydrogen via gasification. Analyses were completed for the technical and economic feasibility of producing biofuel from photosynthetic marine microbes on a commercial scale. Results included estimates for total costs, energy efficiency, and return on investment. The biohydrogen team undertook a comprehensive review of the field and came to what is considered a realistic conclusion. To summarize, continued research is recommended in the fundamentals of the science related to genetic engineering and specific topics to cover knowledge gaps. In the meantime, the team also advocates continued development of related processes which can be linked to pollution control and other real world

  9. Environmental Assessment For Cleanup and Closure of the Energy Technology Engineering Center. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-03-01

    demolish all of the remaining uncontaminated support buildings for which it is responsible. The SSFL RCRA corrective program (including the ongoing groundwater treatment) would continue. Alternative 1 is DOE's preferred alternative. Under Alternative 2, DOE would clean up the ETEC site using a 0.05-millirem standard. A 0.05 mrem exposure would result in an additional theoretical lifetime cancer risk of no more than 1 x 10-6 to the maximally exposed individual over 40 years. Additional environmental impacts of this alternative include 1.4 traffic fatalities and increased release of particulates. As under Alternative 1, DOE would also decommission and demolish the remaining sodium facilities and all of the remaining uncontaminated support buildings for which it is responsible. Ongoing groundwater treatment (interim measures) and the SSFL site-wide RCRA corrective action would continue. The only difference between Alternative 1 and Alternative 2 is the volume of soil that would need to be excavated in order to meet the annual dose rate. As under the preferred alternative, DOE would also decommission and demolish the remaining sodium facility and decommission and demolish all of the remaining uncontaminated support buildings for which it is responsible. The SSFL RCRA corrective program, (including the ongoing groundwater treatment) would continue. Under the No Action Alternative, DOE would conduct no further cleanup of radiological facilities, soil, or the remaining sodium and other support facilities for which it is responsible. Rather, Rocketdyne, as the owner of the site, would prohibit or control access to contaminated facilities, soil, groundwater, or surface water and would continue groundwater treatment. This alternative is described fully in Section 3.4. DOE initially considered other alternatives that were screened out because they were not considered to be reasonable. These include (1) cleanup of the entire SSFL, (2) the disposal of all radiological

  10. 77 FR 46096 - Centers for Disease Control and Prevention

    Science.gov (United States)

    2012-08-02

    ...), concerning strategies and goals for the programs and research within OPHPR, monitoring the overall strategic... Board Strategic National Stockpile ad hoc working group; CDC's response to laboratory biosafety issues... Learning Centers; update on CDC's biosurveillance and situational awareness activities; (2) BSC liaison...

  11. Usable Translational Hand Controllers for NASA's Habitability Design Center

    Science.gov (United States)

    Westbrook, Kimberly

    2016-01-01

    This summer I was given the opportunity to work at the Habitability Design Center (HDC). NASA Johnson Space Center's HDC is currently developing Cislunar and Mars spacecraft mockups. I contributed to this effort by designing from scratch low cost, functional translational hand controllers (THCs) that will be used in spacecraft mission simulation in low to medium fidelity exploration spacecraft mockups. This project fell under the category of mechatronics, a combination of mechanical, electrical, and computer engineering. Being an aerospace engineering student, I was out of my comfort zone. And that was a wonderful thing. The autonomy that my mentor, Dr. Robert Howard, allowed me gave me the opportunity to learn by trying, failing, and trying again. This project was not only a professional success for me, but a significant learning experience. I appreciated the freedom that I had to take the time to learn new things for myself rather than blindly follow instructions. I was the sole person working on this project, and was required to work independently to solve the many hardware and software challenges that the project entailed. I researched THCs that have been used on the ISS, the Space Shuttle, and the Orion MPVC and based my design off of these. I worked through many redesigns before finding an optimal configuration of the necessary mechanisms and electrical components for the THC. Once I had a functional hardware design, I dove into the challenge of getting an Arduino Uno, an extremely low cost and easily programmable microcontroller, to behave as a human interface device. The THCs I built needed to be able to integrate to a mission simulation designed by NASA's Graphics and Visualization Lab. This proved to be the most challenging aspect of the project. To accomplish this I learned how to change the firmware of the USB serial converter microcontroller. The process was very complicated as it involved multiple software programs and manual flashing of pins on the

  12. Final Report Feasibility Study for the California Wave Energy Test Center (CalWavesm) - Volume #2 - Appendices #16-17

    Energy Technology Data Exchange (ETDEWEB)

    Dooher, Brendan [Pacific Gas and Electric Company, San Ramon, CA (United States). Applied Technical Services; Toman, William I. [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States). Inst. of Advanced Technology and Public Policy; Davy, Doug M. [CH2M Hill Engineers, Inc., Sacramento, CA (United States); Blakslee, Samuel N. [California Polytechnic State Univ. (CalPoly), San Luis Obispo, CA (United States)

    2017-07-31

    The California Wave Energy Test Center (CalWave) Feasibility Study project was funded over multiple phases by the Department of Energy to perform an interdisciplinary feasibility assessment to analyze the engineering, permitting, and stakeholder requirements to establish an open water, fully energetic, grid connected, wave energy test center off the coast of California for the purposes of advancing U.S. wave energy research, development, and testing capabilities. Work under this grant included wave energy resource characterization, grid impact and interconnection requirements, port infrastructure and maritime industry capability/suitability to accommodate the industry at research, demonstration and commercial scale, and macro and micro siting considerations. CalWave Phase I performed a macro-siting and down-selection process focusing on two potential test sites in California: Humboldt Bay and Vandenberg Air Force Base. This work resulted in the Vandenberg Air Force Base site being chosen as the most favorable site based on a peer reviewed criteria matrix. CalWave Phase II focused on four siting location alternatives along the Vandenberg Air Force Base coastline and culminated with a final siting down-selection. Key outcomes from this work include completion of preliminary engineering and systems integration work, a robust turnkey cost estimate, shoreside and subsea hazards assessment, storm wave analysis, lessons learned reports from several maritime disciplines, test center benchmarking as compared to existing international test sites, analysis of existing applicable environmental literature, the completion of a preliminary regulatory, permitting and licensing roadmap, robust interaction and engagement with state and federal regulatory agency personnel and local stakeholders, and the population of a Draft Federal Energy Regulatory Commission (FERC) Preliminary Application Document (PAD). Analysis of existing offshore oil and gas infrastructure was also performed

  13. Ion anomalous transport and feedback control. Final technical report, September 1, 1987 - August 31, 1997

    International Nuclear Information System (INIS)

    Sen, A.K.

    1998-01-01

    This final report is comprised of the following six progress reports: Ion Temperature Gradient Instability and Anomalous Transport, July 1989; Ion Temperature Gradient Instability and Anomalous Transport, August 1991; Ion Temperature Gradient Instability and Anomalous Transport, July 1993; Ion Anomalous Transport and Feedback Control, May 1994; Ion Anomalous Transport and Feedback Control, April 1995; and Ion Anomalous Transport and Feedback Control, December 1997

  14. Control system at the Synchrotron Radiation Research Center

    International Nuclear Information System (INIS)

    Jan, G.J.

    1991-01-01

    A modern control system was designed for SRRC to control and monitor the facilities of storage ring, beam transport line and injection system. The SRRC control system is a distributed system which is divided into two logical levels. Several process computers and workstations at upper level provide the computing power for physics simulation, data storage and graphical user interfaces. VME-based Intelligent Local Controllers (ILC) are the backbone of the lower level system which handle the real time devices access and the closed loop control. Ethernet network provides the interconnection between these two layers using IEEE 802.3 and TCP/IP protocol. The software in upper level computers includes data base server, network server, simulation programs, various application codes and X windows based graphical user interfaces. Device drivers, application programs for devices control and communication programs are the major software components at the ILC level

  15. The role of clinical toxicologists and poison control centers in public health.

    Science.gov (United States)

    Sutter, Mark E; Bronstein, Alvin C; Heard, Stuart E; Barthold, Claudia L; Lando, James; Lewis, Lauren S; Schier, Joshua G

    2010-06-01

    Poison control centers and clinical toxicologists serve many roles within public health; however, the degree to which these entities collaborate is unknown. The objective of this survey was to identify successful collaborations of public health agencies with clinical toxicologists and poison control centers. Four areas including outbreak identification, syndromic surveillance, terrorism preparedness, and daily public health responsibilities amenable to poison control center resources were assessed. An online survey was sent to the directors of poison control centers, state epidemiologists, and the most senior public health official in each state and selected major metropolitan areas. This survey focused on three areas: service, structure within the local or state public health system, and remuneration. Questions regarding remuneration and poison control center location within the public health structure were asked to assess if these were critical factors of successful collaborations. Senior state and local public health officials were excluded because of a low response rate. The survey was completed in October 2007. A total of 111 respondents, 61 poison control centers and 50 state epidemiologists, were eligible for the survey. Sixty-nine (62%) of the 111 respondents, completed and returned the survey. Thirty-three (54%) of the 61 poison control centers responded, and 36 of the 50 state epidemiologists (72%) responded. The most frequent collaborations were terrorism preparedness and epidemic illness reporting. Additional collaborations also exist. Important collaborations exist outside of remuneration or poison control centers being a formal part of the public health structure. Poison control centers have expanded their efforts to include outbreak identification, syndromic surveillance, terrorism preparedness, and daily public health responsibilities amenable to poison control center resources. Collaboration in these areas and others should be expanded. Published

  16. Preliminary design for hot dirty-gas control-valve test facility. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    This report presents the results of a preliminary design and cost estimating effort for a facility for the testing of control valves in Hot Dirty Gas (HDGCV) service. This design was performed by Mittelhauser Corporation for the United States Department of Energy's Morgantown Energy Technology Center (METC). The objective of this effort was to provide METC with a feasible preliminary design for a test facility which could be used to evaluate valve designs under simulated service conditions and provide a technology data base for DOE and industry. In addition to the actual preliminary design of the test facility, final design/construction/operating schedules and a facility cost estimate were prepared to provide METC sufficient information with which to evaluate this design. The bases, assumptions, and limitations of this study effort are given. The tasks carried out were as follows: METC Facility Review, Environmental Control Study, Gas Generation Study, Metallurgy Review, Safety Review, Facility Process Design, Facility Conceptual Layout, Instrumentation Design, Cost Estimates, and Schedules. The report provides information regarding the methods of approach used in the various tasks involved in the completion of this study. Section 5.0 of this report presents the results of the study effort. The results obtained from the above-defined tasks are described briefly. The turnkey cost of the test facility is estimated to be $9,774,700 in fourth quarter 1979 dollars, and the annual operating cost is estimated to be $960,000 plus utilities costs which are not included because unit costs per utility were not available from METC.

  17. Sustaining a Focus on Health Equity at the Centers for Disease Control and Prevention Through Organizational Structures and Functions.

    Science.gov (United States)

    Dean, Hazel D; Roberts, George W; Bouye, Karen E; Green, Yvonne; McDonald, Marian

    2016-01-01

    The public health infrastructure required for achieving health equity is multidimensional and complex. The infrastructure should be responsive to current and emerging priorities and capable of providing the foundation for developing, planning, implementing, and evaluating health initiatives. This article discusses these infrastructure requirements by examining how they are operationalized in the organizational infrastructure for promoting health equity at the Centers for Disease Control and Prevention, utilizing the nation's premier public health agency as a lens. Examples from the history of the Centers for Disease Control and Prevention's work in health equity from its centers, institute, and offices are provided to identify those structures and functions that are critical to achieving health equity. Challenges and facilitators to sustaining a health equity organizational infrastructure, as gleaned from the Centers for Disease Control and Prevention's experience, are noted. Finally, we provide additional considerations for expanding and sustaining a health equity infrastructure, which the authors hope will serve as "food for thought" for practitioners in state, tribal, or local health departments, community-based organizations, or nongovernmental organizations striving to create or maintain an impactful infrastructure to achieve health equity.

  18. Toolchain for User-Centered Intelligent Floor Heating Control

    DEFF Research Database (Denmark)

    Agesen, Mads Kronborg; Larsen, Kim Guldstrand; Mikučionis, Marius

    2016-01-01

    temperature is below the user defined target temperature, otherwise it closes for the heating in the room. The disadvantage is that the heat exchange among the rooms, outside weather conditions, weather forecast and other factors are not considered. We propose a novel model-driven approach for intelligent...... floor heating control based on a chain of tools that allow us to gather the sensor readings from the actual hardware and use the state-of-the-art controller synthesis tool UPPAAL Stratego in order to synthesise abstract control strategies that are then executed on the real hardware platform provided...... by the company Seluxit. We have built a scaled demonstrator of the system and the experimental results document a 38% to 52 % increase in user satisfaction, moreover with additional energy savings between 2% to 12%....

  19. Final priority; technical assistance to improve state data capacity--National Technical Assistance Center to improve state capacity to accurately collect and report IDEA data. Final priority.

    Science.gov (United States)

    2013-05-20

    The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Technical Assistance to Improve State Data Capacity program. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2013 and later years. We take this action to focus attention on an identified national need to provide technical assistance (TA) to States to improve their capacity to meet the data collection and reporting requirements of the Individuals with Disabilities Education Act (IDEA). We intend this priority to establish a TA center to improve State capacity to accurately collect and report IDEA data (Data Center).

  20. Use of the Human Centered Design concept when designing ergonomic NPP control rooms

    International Nuclear Information System (INIS)

    Skrehot, Petr A.; Houser, Frantisek; Riha, Radek; Tuma, Zdenek

    2015-01-01

    Human-Centered Design is a concept aimed at reconciling human needs on the one hand and limitations posed by the design disposition of the room being designed on the other hand. This paper describes the main aspects of application of the Human-Centered Design concept to the design of nuclear power plant control rooms. (orig.)

  1. CNC Turning Center Advanced Operations. Computer Numerical Control Operator/Programmer. 444-332.

    Science.gov (United States)

    Skowronski, Steven D.; Tatum, Kenneth

    This student guide provides materials for a course designed to introduce the student to the operations and functions of a two-axis computer numerical control (CNC) turning center. The course consists of seven units. Unit 1 presents course expectations and syllabus, covers safety precautions, and describes the CNC turning center components, CNC…

  2. 76 FR 28438 - Board of Scientific Counselors (BSC), National Center for Injury Prevention and Control (NCIPC)

    Science.gov (United States)

    2011-05-17

    ... below concerns RFA CE10-004, the National Academic Centers of Excellence in Youth Violence Prevention... Violence Prevention (U01). Contact Person for More Information: Gwendolyn Haile Cattledge, PhD, M.S.E.H., F... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of...

  3. 78 FR 64505 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

    Science.gov (United States)

    2013-10-29

    ... Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with... reviews progress toward injury prevention goals and provides evidence in injury prevention- related... matters, including the: (1) Review of extramural research concepts for funding opportunity announcements...

  4. Design electronic of manual control for cobalt unit Alcyon II of the National Center of Radiotherapy

    International Nuclear Information System (INIS)

    Morraz V, E.; Campos, X.

    2002-01-01

    A manual control for the cobalt unit, of French production, it was designed by the team of electronic of the national center of radiotherapy with materials found in the national trade. The control has the same characteristics that the original one and it is also adapted a switch from which you can control the lights of the room of the cobalt

  5. Glycemic control, compliance, and satisfaction for diabetic gravidas in centering group care.

    Science.gov (United States)

    Parikh, Laura I; Jelin, Angie C; Iqbal, Sara N; Belna, Sarah L; Fries, Melissa H; Patel, Misbah; Desale, Sameer; Ramsey, Patrick S

    2017-05-01

    To determine if diabetic gravidas enrolled in Centering® group care have improved glycemic control compared to those attending standard prenatal care. To compare compliance and patient satisfaction between the groups. We conducted a prospective cohort study of diabetics enrolled in centering group care from October 2013 to December 2015. Glycemic control, compliance and patient satisfaction (five-point Likert scale) were evaluated. Student's t-test, Chi-Square and mixed effects model were used to compare outcomes. We compared 20 patients in centering to 28 standard prenatal care controls. Mean fasting blood sugar was lower with centering group care (91.0 versus 105.5 mg/dL, p =0.017). There was no difference in change in fasting blood sugar over time between the two groups (p = 0.458). The percentage of time patients brought their blood glucose logs did not differ between the centering group and standard prenatal care (70.7 versus 73.9%, p = 0.973). Women in centering group care had better patient satisfaction scores for "ability to be seen by a physician" (5 versus 4, p = 0.041) and "time in waiting room" (5 versus 4, p =0.001). Fasting blood sugar was lower for patients in centering group care. Change in blood sugar over time did not differ between groups. Diabetic gravidas enrolled in centering group care report improved patient satisfaction.

  6. Transportable Payload Operations Control Center reusable software: Building blocks for quality ground data systems

    Science.gov (United States)

    Mahmot, Ron; Koslosky, John T.; Beach, Edward; Schwarz, Barbara

    1994-01-01

    The Mission Operations Division (MOD) at Goddard Space Flight Center builds Mission Operations Centers which are used by Flight Operations Teams to monitor and control satellites. Reducing system life cycle costs through software reuse has always been a priority of the MOD. The MOD's Transportable Payload Operations Control Center development team established an extensive library of 14 subsystems with over 100,000 delivered source instructions of reusable, generic software components. Nine TPOCC-based control centers to date support 11 satellites and achieved an average software reuse level of more than 75 percent. This paper shares experiences of how the TPOCC building blocks were developed and how building block developer's, mission development teams, and users are all part of the process.

  7. A Conceptual Framework for the Mission of the NIE Research and Development Center for Teacher Quality and Effectiveness: Final Report.

    Science.gov (United States)

    Hawley, Willis D.; And Others

    This report presents a conceptual framework for the mission of the National Institute of Education (NIE) Research and Development Center for Teacher Quality and Effectiveness. Several important issues that should be the focus of the Center are identified, and the theoretical foundations to guide the research and development activities to study…

  8. 75 FR 78997 - Centers for Disease Control and Prevention/Health Resources and Services Administration (CDC/HRSA...

    Science.gov (United States)

    2010-12-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Centers for Disease Control and Prevention/Health Resources and Services Administration (CDC/HRSA) Advisory Committee... and other committee management activities, for both the Centers for Disease Control and Prevention and...

  9. 75 FR 7483 - Advisory Committee to the Director (ACD), Centers for Disease Control (CDC) and Prevention-Ethics...

    Science.gov (United States)

    2010-02-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Committee to the Director (ACD), Centers for Disease Control (CDC) and Prevention--Ethics Subcommittee (ES); Correction AGENCY: Centers for Disease Control and Prevention (CDC), HHS. ACTION: Notice of meeting; meeting...

  10. Online social networking and US poison control centers: Facebook as a means of information distribution.

    Science.gov (United States)

    Vo, Kathy; Smollin, Craig

    2015-06-01

    Online social networking services such as Facebook provide a novel medium for the dissemination of public health information by poison control centers in the United States. We performed a cross-sectional study of poison control center Facebook pages to describe and assess the use of this medium. Facebook pages associated with poison control centers were identified during a continuous two-week period from December 24, 2012 to January 7, 2013. Data were extracted from each page, including affiliated poison control center; page duration, measured in years since registration; number of subscribers; number of postings by general toxicological category; and measures of user-generated activity including "likes", "shares", and comments per posting. Among the 56 US poison control centers, 39 Facebook pages were identified, of which 29 were currently active. The total number of active pages has increased by 140% from 2009 to 2013 (average of 25% per year). The total number of all subscribers to active pages was 11,211, ranging from 40 to 2,456 (mean 387, SD 523), equal to 0.006% of all Facebook users in the United States. The number of subscribers per page was associated with page duration, number of postings, and type of postings. The types of toxicological postings were public education (45%), self-promotion (28%), childhood safety (12%), drugs of abuse (8%), environmental poisonings (6%), and general overdoses (1%). Slightly over half of all poison control centers in the United States are supplementing their outreach and education efforts through Facebook. In general, the more active the poison control center on Facebook, the more page followers and follower engagement gained.

  11. Coal surface control for advanced physical fine coal cleaning technologies. Final report, September 19, 1988--August 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Morsi, B.I.; Chiang, S.H.; Sharkey, A.; Blachere, J.; Klinzing, G.; Araujo, G.; Cheng, Y.S.; Gray, R.; Streeter, R.; Bi, H.; Campbell, P.; Chiarlli, P.; Ciocco, M.; Hittle, L.; Kim, S.; Kim, Y.; Perez, L.; Venkatadri, R.

    1992-12-31

    This final report presents the research work carried out on the Coal Surface Control for Advanced Physical Fine Coal Cleaning Technologies project, sponsored by the US Department of Energy, Pittsburgh Energy Technology Center (DOE/PETC). The project was to support the engineering development of the selective agglomeration technology in order to reduce the sulfur content of US coals for controlling SO{sub 2} emissions (i.e., acid rain precursors). The overall effort was a part of the DOE/PETCs Acid Rain Control Initiative (ARCI). The overall objective of the project is to develop techniques for coal surface control prior to the advanced physical fine coal cleaning process of selective agglomeration in order to achieve 85% pyrite sulfur rejection at an energy recovery greater than 85% based on run-of-mine coal. The surface control is meant to encompass surface modification during grinding and laboratory beneficiation testing. The project includes the following tasks: Project planning; methods for analysis of samples; development of standard beneficiation test; grinding studies; modification of particle surface; and exploratory R&D and support. The coal samples used in this project include three base coals, Upper Freeport - Indiana County, PA, Pittsburgh NO. 8 - Belmont County, OH, and Illinois No. 6 - Randolph County, IL, and three additional coals, Upper Freeport - Grant County- WV, Kentucky No. 9 Hopkins County, KY, and Wyodak - Campbell County, WY. A total of 149 drums of coal were received.

  12. Adaptation effects in static postural control by providing simultaneous visual feedback of center of pressure and center of gravity.

    Science.gov (United States)

    Takeda, Kenta; Mani, Hiroki; Hasegawa, Naoya; Sato, Yuki; Tanaka, Shintaro; Maejima, Hiroshi; Asaka, Tadayoshi

    2017-07-19

    The benefit of visual feedback of the center of pressure (COP) on quiet standing is still debatable. This study aimed to investigate the adaptation effects of visual feedback training using both the COP and center of gravity (COG) during quiet standing. Thirty-four healthy young adults were divided into three groups randomly (COP + COG, COP, and control groups). A force plate was used to calculate the coordinates of the COP in the anteroposterior (COP AP ) and mediolateral (COP ML ) directions. A motion analysis system was used to calculate the coordinates of the center of mass (COM) in both directions (COM AP and COM ML ). The coordinates of the COG in the AP direction (COG AP ) were obtained from the force plate signals. Augmented visual feedback was presented on a screen in the form of fluctuation circles in the vertical direction that moved upward as the COP AP and/or COG AP moved forward and vice versa. The COP + COG group received the real-time COP AP and COG AP feedback simultaneously, whereas the COP group received the real-time COP AP feedback only. The control group received no visual feedback. In the training session, the COP + COG group was required to maintain an even distance between the COP AP and COG AP and reduce the COG AP fluctuation, whereas the COP group was required to reduce the COP AP fluctuation while standing on a foam pad. In test sessions, participants were instructed to keep their standing posture as quiet as possible on the foam pad before (pre-session) and after (post-session) the training sessions. In the post-session, the velocity and root mean square of COM AP in the COP + COG group were lower than those in the control group. In addition, the absolute value of the sum of the COP - COM distances in the COP + COG group was lower than that in the COP group. Furthermore, positive correlations were found between the COM AP velocity and COP - COM parameters. The results suggest that the novel visual feedback

  13. The Center for the Study of Early Events in Photosynthesis. Final report, September 1, 1988--August 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Orr, L.A.

    1994-12-31

    The ASU Center for the Study of Early Events in Photosynthesis was established in 1988 with funding through a five-year grant from the USDA/DOE/NSF Plant Science Center program and a grant from the NSF Biological Facilities program. Its scientific objective is to elucidate the basic principles that govern photosynthetic energy collection and storage. Understanding these principles is vital to mankind, as photosynthesis provides most of our food, fiber and energy needs. The Center attempts to fulfill this objective through research of the highest standard, coupled inextricably with quality education at the undergraduate, graduate and postdoctoral levels. These goals are met via a network of collaborative, interdisciplinary research groups comprising 100 personnel within the Department of Chemistry and Biochemistry, the Department of Botany, and the Department of Physics and Astronomy. The work of these research groups is facilitated by the Center through a variety of important infrastructural functions.

  14. System of automatic control over data Acquisition and Transmission to IGR NNC RK Data Center

    International Nuclear Information System (INIS)

    Komarov, I.I.; Gordienko, D.D.; Kunakov, A.V.

    2005-01-01

    Automated system for seismic and acoustic data acquisition and transmission in real time was established in Data Center IGR NNC RK, which functions very successively. The system monitors quality and volume of acquired information and also controls the status of the system and communication channels. Statistical data on system operation are accumulated in created database. Information on system status is reflected on the Center Web page. (author)

  15. On-Demand Final State Control of a Surface-Bound Bistable Single Molecule Switch.

    Science.gov (United States)

    Garrido Torres, José A; Simpson, Grant J; Adams, Christopher J; Früchtl, Herbert A; Schaub, Renald

    2018-04-12

    Modern electronic devices perform their defined action because of the complete reliability of their individual active components (transistors, switches, diodes, and so forth). For instance, to encode basic computer units (bits) an electrical switch can be used. The reliability of the switch ensures that the desired outcome (the component's final state, 0 or 1) can be selected with certainty. No practical data storage device would otherwise exist. This reliability criterion will necessarily need to hold true for future molecular electronics to have the opportunity to emerge as a viable miniaturization alternative to our current silicon-based technology. Molecular electronics target the use of single-molecules to perform the actions of individual electronic components. On-demand final state control over a bistable unimolecular component has therefore been one of the main challenges in the past decade (1-5) but has yet to be achieved. In this Letter, we demonstrate how control of the final state of a surface-supported bistable single molecule switch can be realized. On the basis of the observations and deductions presented here, we further suggest an alternative strategy to achieve final state control in unimolecular bistable switches.

  16. Sixth NASA Glenn Research Center Propulsion Control and Diagnostics (PCD) Workshop

    Science.gov (United States)

    Litt, Jonathan S. (Compiler)

    2018-01-01

    The Intelligent Control and Autonomy Branch at NASA Glenn Research Center hosted the Sixth Propulsion Control and Diagnostics Workshop on August 22-24, 2017. The objectives of this workshop were to disseminate information about research being performed in support of NASA Aeronautics programs; get feedback from peers on the research; and identify opportunities for collaboration. There were presentations and posters by NASA researchers, Department of Defense representatives, and engine manufacturers on aspects of turbine engine modeling, control, and diagnostics.

  17. Growth and final height of children with Gaucher disease: A 15-year follow-up at an Israeli Gaucher center.

    Science.gov (United States)

    Mendelsohn, Espen; Meir, Amos; Abrahamov, Aya; Elstein, Deborah; Zimran, Ari; Levy-Khademi, Floris

    2018-02-01

    It is held that enzyme replacement therapy (ERT) accelerates the growth rate in children with Gaucher disease, but its effect on final height has not been established with certainty. This study presents final heights of Gaucher patients followed up for 15years. The study included 41 adults with non-neuronopathic Gaucher disease. The final height of the patients and age at puberty was compared to their mid-parental target height and to their siblings' heights. Mean final height standard deviation score (HSDS) in the patients was -0.22, but none of the patients was abnormally short (HSDS of less than -2.2). Mean age at menarche of the female patients (14.7years) was significantly delayed compared to that of their mothers (P=0.0005), and mean age at first shaving in the boys was 16years. Our study showed that the mean final height of Gaucher patients fell below the mean of the 2000 CDC growth charts, but the patients were not of short stature (height less than the 3rd percentile). ERT treatment did not significantly impact the mean final HSDS. The onset of puberty, as indicated by the age at menarche, was delayed in girls with Gaucher disease. Copyright © 2016 Elsevier Inc. All rights reserved.

  18. Sensor guided control and navigation with intelligent machines. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Ghosh, Bijoy K.

    2001-03-26

    This item constitutes the final report on ''Visionics: An integrated approach to analysis and design of intelligent machines.'' The report discusses dynamical systems approach to problems in robust control of possibly time-varying linear systems, problems in vision and visually guided control, and, finally, applications of these control techniques to intelligent navigation with a mobile platform. Robust design of a controller for a time-varying system essentially deals with the problem of synthesizing a controller that can adapt to sudden changes in the parameters of the plant and can maintain stability. The approach presented is to design a compensator that simultaneously stabilizes each and every possible mode of the plant as the parameters undergo sudden and unexpected changes. Such changes can in fact be detected by a visual sensor and, hence, visually guided control problems are studied as a natural consequence. The problem here is to detect parameters of the plant and maintain st ability in the closed loop using a ccd camera as a sensor. The main result discussed in the report is the role of perspective systems theory that was developed in order to analyze such a detection and control problem. The robust control algorithms and the visually guided control algorithms are applied in the context of a PUMA 560 robot arm control where the goal is to visually locate a moving part on a mobile turntable. Such problems are of paramount importance in manufacturing with a certain lack of structure. Sensor guided control problems are extended to problems in robot navigation using a NOMADIC mobile platform with a ccd and a laser range finder as sensors. The localization and map building problems are studied with the objective of navigation in an unstructured terrain.

  19. Complete Quantum Control of a Single Silicon-Vacancy Center in a Diamond Nanopillar

    Science.gov (United States)

    Zhang, Jingyuan Linda; Lagoudakis, Konstantinos G.; Tzeng, Yan-Kai; Dory, Constantin; Radulaski, Marina; Kelaita, Yousif; Shen, Zhi-Xun; Melosh, Nicholas A.; Chu, Steven; Vuckovic, Jelena

    Coherent quantum control of a quantum bit (qubit) is an important step towards its use in a quantum network. SiV- center in diamond offers excellent physical qualities such as low inhomogeneous broadening, fast photon emission, and a large Debye-Waller factor, while the fast spin manipulation and techniques to extend the spin coherence time are under active investigation. Here, we demonstrate full coherent control over the state of a single SiV- center in a diamond nanopillar using ultrafast optical pulses. The high quality of the chemical vapor deposition grown SiV- centers allows us to coherently manipulate and quasi-resonantly read out the state of the single SiV- center. Moreover, the SiV- centers being coherently controlled are integrated into diamond nanopillar arrays in a site-controlled, individually addressable manner with high yield, low strain, and high spectral stability, which paves the way for scalable on chip optically accessible quantum system in a quantum photonic network. Financial support is provided by the DOE Office of Basic Energy Sciences, Division of Materials Sciences through Stanford Institute for Materials and Energy Sciences (SIMES) under contract DE-AC02-76SF00515.

  20. Final Environmental Assessment for the First Air Force Air Operations Center, First Air Force Headquarters/Air Force Forces Center, and Highway 98 Overpass at Tyndall Air Force Base, Florida

    Science.gov (United States)

    2004-01-01

    no comments regarding the Draft Environmental Assessment for the First Air Force Operations Center, First Air Force Headquarters/Air Force Forces...COUNCIL ] No Comment BAY - BAY COUNTY No Final Comments Received ENVIRONMENTAL POLICY UNIT - OFFICE OF POLICY AND BUDGET, ENVIRONMENTAL POLICY UNIT NO ...CONSERVATION COMMISSION [ NO COMMENT BY BRIAN BARNETT ON 4/12/04. [STATE - FLORIDA DEPARTMENT OF STATE [ No Comment [TRANSPORTATION - FLORIDA DEPARTMENT

  1. Solar heating and cooling system installed at RKL Controls Company, Lumberton, New Jersey. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    Solar heating and cooling of a 40,000 square foot manufacturing building, sales offices and the solar computer control center/display room are described. Information on system description, test data, major problems and resolutions, performance, operation and maintenance manual, manufacturer's literature and as-built drawings are provided also. The solar system is composed of 6000 square feet of Sunworks double glazed flat plate collectors, external above ground storage subsystem, controls, ARKLA absorption chiller, heat recovery and a cooling tower.

  2. Modeling of integrated environmental control systems for coal-fired power plants. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Rubin, E.S.; Salmento, J.S.; Frey, H.C.; Abu-Baker, A.; Berkenpas, M.

    1991-05-01

    The Integrated Environmental Control Model (IECM) was designed to permit the systematic evaluation of environmental control options for pulverized coal-fired (PC) power plants. Of special interest was the ability to compare the performance and cost of advanced pollution control systems to ``conventional`` technologies for the control of particulate, SO{sub 2} and NO{sub x}. Of importance also was the ability to consider pre-combustion, combustion and post-combustion control methods employed alone or in combination to meet tough air pollution emission standards. Finally, the ability to conduct probabilistic analyses is a unique capability of the IECM. Key results are characterized as distribution functions rather than as single deterministic values. (VC)

  3. Procedures for identifying reasonably available control technology for stationary sources of PM-10. Final report

    International Nuclear Information System (INIS)

    Fitzpatrick, M.J.; Ellefson, R.

    1992-09-01

    The guidance document sets forth procedures and identifies sources of information that will assist State and local air pollution control agencies in determining Reasonably Available Control Technology (RACT) for PM-10 (particulate matter having a nominal aerometric diameter of 10 microns or less) emission from existing stationary sources on a case-by-case basis. It provides an annotated bibliography of documents to aid in identifying the activities that cause PM-10 emissions as well as applicable air pollution control measures and their effectiveness in reducing emissions. The most stringent state total particulate matter (PM) emission limits are identified for several categories of PM-10 sources and compared to available emission test data. Finally, guidance is provided on procedures for estimating total capital investment and total annual cost of the control measures which are generally used to control PM-10 emissions

  4. 78 FR 894 - Interim Final Determination To Stay Sanctions, Imperial County Air Pollution Control District

    Science.gov (United States)

    2013-01-07

    ...EPA is making an interim final determination to stay imposition of sanctions based on a proposed approval of revisions to the Imperial County Air Pollution Control District (ICAPCD) portion of the California State Implementation Plan (SIP) published elsewhere in this Federal Register. The revisions concern local rules that regulate inhalable particulate matter (PM10) emissions from sources of fugitive dust such as unpaved roads and disturbed soils in open and agricultural areas in Imperial County.

  5. Energy Center Structure Optimization by using Smart Technologies in Process Control System

    Science.gov (United States)

    Shilkina, Svetlana V.

    2018-03-01

    The article deals with practical application of fuzzy logic methods in process control systems. A control object - agroindustrial greenhouse complex, which includes its own energy center - is considered. The paper analyzes object power supply options taking into account connection to external power grids and/or installation of own power generating equipment with various layouts. The main problem of a greenhouse facility basic process is extremely uneven power consumption, which forces to purchase redundant generating equipment idling most of the time, which quite negatively affects project profitability. Energy center structure optimization is largely based on solving the object process control system construction issue. To cut investor’s costs it was proposed to optimize power consumption by building an energy-saving production control system based on a fuzzy logic controller. The developed algorithm of automated process control system functioning ensured more even electric and thermal energy consumption, allowed to propose construction of the object energy center with a smaller number of units due to their more even utilization. As a result, it is shown how practical use of microclimate parameters fuzzy control system during object functioning leads to optimization of agroindustrial complex energy facility structure, which contributes to a significant reduction in object construction and operation costs.

  6. Gravity Plant Physiology Facility (GPPF) Team in the Spacelab Payload Operations Control Center (SL

    Science.gov (United States)

    1992-01-01

    The primary payload for Space Shuttle Mission STS-42, launched January 22, 1992, was the International Microgravity Laboratory-1 (IML-1), a pressurized manned Spacelab module. The goal of IML-1 was to explore in depth the complex effects of weightlessness of living organisms and materials processing. Around-the-clock research was performed on the human nervous system's adaptation to low gravity and effects of microgravity on other life forms such as shrimp eggs, lentil seedlings, fruit fly eggs, and bacteria. Materials processing experiments were also conducted, including crystal growth from a variety of substances such as enzymes, mercury iodide, and a virus. The Huntsville Operations Support Center (HOSC) Spacelab Payload Operations Control Center (SL POCC) at the Marshall Space Flight Center (MSFC) was the air/ground communication channel used between the astronauts and ground control teams during the Spacelab missions. Featured is the Gravity Plant Physiology Facility (GPPF) team in the SL POCC during the IML-1 mission.

  7. Critical Point Facility (CPE) Group in the Spacelab Payload Operations Control Center (SL POCC)

    Science.gov (United States)

    1992-01-01

    The primary payload for Space Shuttle Mission STS-42, launched January 22, 1992, was the International Microgravity Laboratory-1 (IML-1), a pressurized manned Spacelab module. The goal of IML-1 was to explore in depth the complex effects of weightlessness of living organisms and materials processing. Around-the-clock research was performed on the human nervous system's adaptation to low gravity and effects of microgravity on other life forms such as shrimp eggs, lentil seedlings, fruit fly eggs, and bacteria. Materials processing experiments were also conducted, including crystal growth from a variety of substances such as enzymes, mercury iodide, and a virus. The Huntsville Operations Support Center (HOSC) Spacelab Payload Operations Control Center (SL POCC) at the Marshall Space Flight Center (MSFC) was the air/ground communication channel used between the astronauts and ground control teams during the Spacelab missions. Featured is the Critical Point Facility (CPE) group in the SL POCC during STS-42, IML-1 mission.

  8. Initial Flight Test of the Production Support Flight Control Computers at NASA Dryden Flight Research Center

    Science.gov (United States)

    Carter, John; Stephenson, Mark

    1999-01-01

    The NASA Dryden Flight Research Center has completed the initial flight test of a modified set of F/A-18 flight control computers that gives the aircraft a research control law capability. The production support flight control computers (PSFCC) provide an increased capability for flight research in the control law, handling qualities, and flight systems areas. The PSFCC feature a research flight control processor that is "piggybacked" onto the baseline F/A-18 flight control system. This research processor allows for pilot selection of research control law operation in flight. To validate flight operation, a replication of a standard F/A-18 control law was programmed into the research processor and flight-tested over a limited envelope. This paper provides a brief description of the system, summarizes the initial flight test of the PSFCC, and describes future experiments for the PSFCC.

  9. Personal networks and locus of control in large urban centers of Argentina

    Directory of Open Access Journals (Sweden)

    Pablo De Grande

    2013-12-01

    Full Text Available This study analyzes the relationship between locus of control and interpersonal relations structures in Argentina. After a representative sample (n = 1500 of households in seven major urban centers (>200,000 inhabitants, it examines the relationship between the externality of locus of control and different aspects of personal networks of each respondent. The results show that people having more relations experiment lower levels of externality of locus of control. Likewise, lower levels of externality are informed when personal ties outside the neighborhood are available, as well as ties high educational level. In this regard, significant associations are verified between control and personal relations structures.

  10. Preliminary assessment of nuclear energy centers and energy systems complexes in the western United States. Final report

    International Nuclear Information System (INIS)

    Gottlieb, P.; Robinson, J.H.; Smith, D.R.

    1978-02-01

    The Nuclear Energy Center siting opportunities in the eleven western states have been systematically examined. The study area has been divided into 10-mile by 10-mile grid cells, and each cell has been evaluated in terms of overall suitability and site-related costs. Composite suitability consists of a weighted sum of ten important nuclear power plant siting issues; the particular weights used for this study were decided by a Delphi session of twenty individuals with energy facility siting expertise, with at least one representative from each of the eleven western states. Site-related costs consist of the additional expenditures required for seismic hardening (in seismically active areas), electric power transmission lines (for sites significantly far from load centers), and wet/dry cooling system costs

  11. Preliminary assessment of nuclear energy centers and energy systems complexes in the western United States. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Gottlieb, P.; Robinson, J.H.; Smith, D.R.

    1978-02-01

    The Nuclear Energy Center siting opportunities in the eleven western states have been systematically examined. The study area has been divided into 10-mile by 10-mile grid cells, and each cell has been evaluated in terms of overall suitability and site-related costs. Composite suitability consists of a weighted sum of ten important nuclear power plant siting issues; the particular weights used for this study were decided by a Delphi session of twenty individuals with energy facility siting expertise, with at least one representative from each of the eleven western states. Site-related costs consist of the additional expenditures required for seismic hardening (in seismically active areas), electric power transmission lines (for sites significantly far from load centers), and wet/dry cooling system costs (limited water availability and/or high summer temperatures).

  12. Adaptation of center of mass control under microgravity in a whole-body lifting task

    NARCIS (Netherlands)

    Kingma, I.; Toussaint, H.M.; Commissaris, D.A.C.M.; Savelsbergh, G.J.P.

    1999-01-01

    Human balance in stance is usually defined as the preservation of the vertical projection of the center of mass (COM) on the support area formed by the feet. Under microgravity conditions, the control of equilibrium seems to be no longer required. However, several reports indicate preservation of

  13. 77 FR 31018 - Board of Scientific Counselors (BSC), National Center for Injury Prevention and Control (NCIPC)

    Science.gov (United States)

    2012-05-24

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of... Violence or Sexual Violence Perpetration (R01), FOA CE12-003. In accordance with Section 10(a)(2) of the..., discussion of competitive applications following initial review of applications received in response to FOA...

  14. 75 FR 12769 - National Center for Complementary and Alternative Medicine Announcement of Workshop on Control...

    Science.gov (United States)

    2010-03-17

    ... Complementary and Alternative Medicine Announcement of Workshop on Control/Comparison Groups for Trials of Non... Complementary and Alternative Medicine (NCCAM) was established in 1998 with the mission of exploring... Center for Complementary and Alternative Medicine, National Institutes of Health. [FR Doc. 2010-5767...

  15. CNC Turning Center Operations and Prove Out. Computer Numerical Control Operator/Programmer. 444-334.

    Science.gov (United States)

    Skowronski, Steven D.

    This student guide provides materials for a course designed to instruct the student in the recommended procedures used when setting up tooling and verifying part programs for a two-axis computer numerical control (CNC) turning center. The course consists of seven units. Unit 1 discusses course content and reviews and demonstrates set-up procedures…

  16. Environmental control and life support testing at the Marshall Space Flight Center

    Science.gov (United States)

    Schunk, Richard G.; Humphries, William R.

    1987-01-01

    The Space Station Environmental Control and Life Support System (ECLSS) test program at the Marshall Space Flight Center (MSFC) is addressed. The immediate goals and current activities of the test program are discussed. Also described are the Core Module Integration Facility (CMIF) and the initial ECLSS test configuration. Future plans for the ECLSS test program and the CMIF are summarized.

  17. Test bed control center design concept for Tank Waste Retrieval Manipulator Systems

    International Nuclear Information System (INIS)

    Sundstrom, E.; Draper, J.V.; Fausz, A.

    1995-01-01

    This paper describes the design concept for the control center for the Single Shell Tank Waste Retrieval Manipulator System test bed and the design process behind the concept. The design concept supports all phases of the test bed mission, including technology demonstration, comprehensive system testing, and comparative evaluation for further development and refinement of the TWRMS for field operations

  18. Final Environmental Assessment: Addressing An Army and Air Force Exchange Service (AAFES) Lifestyle Center at Eglin Air Force Base, Florida

    Science.gov (United States)

    2008-11-01

    families on USAF and Army installations. The mission of AAFES is to provide quality goods and services at competitively low prices and generate...quality goods and services at competitively low prices and generate earnings to support morale, welfare, and recreation (MWR) programs (AAFES 2008...Court Building 12 3,773 Remain in current location with expansion planned. Car Care Center Building 501 1,250 Remain in current location Starbucks

  19. The psychology of computer displays in the modern mission control center

    Science.gov (United States)

    Granaas, Michael M.; Rhea, Donald C.

    1988-01-01

    Work at NASA's Western Aeronautical Test Range (WATR) has demonstrated the need for increased consideration of psychological factors in the design of computer displays for the WATR mission control center. These factors include color perception, memory load, and cognitive processing abilities. A review of relevant work in the human factors psychology area is provided to demonstrate the need for this awareness. The information provided should be relevant in control room settings where computerized displays are being used.

  20. Willingness to pay and willingness to accept in a patient-centered blood pressure control study.

    Science.gov (United States)

    Gleason-Comstock, Julie; Streater, Alicia; Goodman, Allen; Janisse, James; Brody, Aaron; Mango, LynnMarie; Dawood, Rachelle; Levy, Phillip

    2017-08-07

    Elevated blood pressure is a major risk factor for cardiovascular disease and stroke but patients often discount recommended behavioral changes and prescribed medications. While effective interventions to promote adherence have been developed, cost-effectiveness from the patient's perspective, has not been well studied. The valuation of patient time and out of pocket expenses should be included while performing cost effectiveness evaluation. The Achieve BP study uses the contingent valuation method to assess willingness to accept (WTA) and willingness to pay (WTP) among patients with a history of uncontrolled blood pressure discharged from an urban emergency department and enrolled in a larger randomized controlled trial. WTA and WTP were assessed by asking patients a series of questions about time and travel costs and time value related to their study participation. A survey was conducted during the final study visit with patients to investigate the effectiveness of a kiosk-based educational intervention on blood pressure control. All study patients, regardless of study arm, received the same clinical protocol of commonly prescribed antihypertensive medication and met with research clinicians four times as part of the study procedures. Thirty-eight patients were offered the opportunity to participate in the cost-effectiveness study and all completed the survey. Statistical comparisons revealed these 38 patients were similar in representation to the entire RCT study population. All 38 (100.0%) were African-American, with an average age of 49.1 years; 55.3% were male, 21.1% were married, 78.9% had a high school or higher education, and 44.7% were working. 55.9% did not have a primary care provider and 50.0% did not have health insurance. Time price linear regression analysis was performed to estimate predictors of WTA and WTP. WTP and WTA may generate different results, and the elasticities were proportional to the estimated coefficients, with WTP about twice as

  1. Gravity packaging final waste recovery based on gravity separation and chemical imaging control.

    Science.gov (United States)

    Bonifazi, Giuseppe; Serranti, Silvia; Potenza, Fabio; Luciani, Valentina; Di Maio, Francesco

    2017-02-01

    Plastic polymers are characterized by a high calorific value. Post-consumer plastic waste can be thus considered, in many cases, as a typical secondary solid fuels according to the European Commission directive on End of Waste (EoW). In Europe the practice of incineration is considered one of the solutions for waste disposal waste, for energy recovery and, as a consequence, for the reduction of waste sent to landfill. A full characterization of these products represents the first step to profitably and correctly utilize them. Several techniques have been investigated in this paper in order to separate and characterize post-consumer plastic packaging waste fulfilling the previous goals, that is: gravity separation (i.e. Reflux Classifier), FT-IR spectroscopy, NIR HyperSpectralImaging (HSI) based techniques and calorimetric test. The study demonstrated as the proposed separation technique and the HyperSpectral NIR Imaging approach allow to separate and recognize the different polymers (i.e. PolyVinyl Chloride (PVC), PolyStyrene (PS), PolyEthylene (PE), PoliEtilene Tereftalato (PET), PolyPropylene (PP)) in order to maximize the removal of the PVC fraction from plastic waste and to perform the full quality control of the resulting products, can be profitably utilized to set up analytical/control strategies finalized to obtain a low content of PVC in the final Solid Recovered Fuel (SRF), thus enhancing SRF quality, increasing its value and reducing the "final waste". Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Effects of voluntary and automatic control of center of pressure sway during quiet standing.

    Science.gov (United States)

    Ueta, Kozo; Okada, Yohei; Nakano, Hideki; Osumi, Michihiro; Morioka, Shu

    2015-01-01

    The authors investigated the effects of voluntary and automatic control on the spatial variables (envelope area, maximal amplitude, and root mean square [RMS]) of center of pressure (COP) displacement during quiet standing and identified differences in their postural control strategies (mean velocity [MV], mean power frequency [MPF], and power density). COP data were recorded under relaxed (experimental control), still (voluntary control), and dual (automatic control) conditions. RMS was significantly lower in the still and dual conditions than in the relaxed condition. MV, MPF, and power density were significantly higher in the still condition than in the dual condition. These results indicate that both voluntary and automatic control decrease the spatial variables of COP displacement; however, their postural control strategies are different.

  3. Design of SCADA water resource management control center by a bi-objective redundancy allocation problem and particle swarm optimization

    International Nuclear Information System (INIS)

    Dolatshahi-Zand, Ali; Khalili-Damghani, Kaveh

    2015-01-01

    SCADA is an essential system to control critical facilities in big cities. SCADA is utilized in several sectors such as water resource management, power plants, electricity distribution centers, traffic control centers, and gas deputy. The failure of SCADA results in crisis. Hence, the design of SCADA system in order to serve a high reliability considering limited budget and other constraints is essential. In this paper, a bi-objective redundancy allocation problem (RAP) is proposed to design Tehran's SCADA water resource management control center. Reliability maximization and cost minimization are concurrently considered. Since the proposed RAP is a non-linear multi-objective mathematical programming so the exact methods cannot efficiently handle it. A multi-objective particle swarm optimization (MOPSO) algorithm is designed to solve it. Several features such as dynamic parameter tuning, efficient constraint handling and Pareto gridding are inserted in proposed MOPSO. The results of proposed MOPSO are compared with an efficient ε-constraint method. Several non-dominated designs of SCADA system are generated using both methods. Comparison metrics based on accuracy and diversity of Pareto front are calculated for both methods. The proposed MOPSO algorithm reports better performance. Finally, in order to choose the practical design, the TOPSIS algorithm is used to prune the Pareto front. - Highlights: • Multi-objective redundancy allocation problem (MORAP) is proposed to design SCADA system. • Multi-objective particle swarm optimization (MOPSO) is proposed to solve MORAP. • Efficient epsilon-constraint method is adapted to solve MORAP. • Non-dominated solutions are generated on Pareto front of MORAP by both methods. • Several multi-objective metrics are calculated to compare the performance of methods

  4. The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building

    Directory of Open Access Journals (Sweden)

    Nadeem Khan

    2014-03-01

    Full Text Available Background: Chemical exposure is a major health problem globally. Poison control centers (PCCs play a leading role both in developed and developing countries in the prevention and control of poisonous chemical exposures. In this study, we aimed to assess the current state of PCCs in Pakistan and highlight capacity building needs in these centers. Methods: A cross-sectional survey of the two registered PCCs was done during August – December 2011. Necessary services of the PCCs were evaluated and the data were recorded on a predesigned checklist. Results: Both PCCs are affiliated to a tertiary care hospital. Clinical services to poisoned patients were available 24 hours a day / 7 days a week. Information on common local products was available to poison center staff. Both centers were involved in undergraduate and post graduate teaching. Telephone poison information service was not available in either of centers. There was a limited capacity for qualitative and analytical toxicology. Common antidotes were available. There were limited surveillance activities to capture toxic risks existing in the community and also a deficiency was observed in chemical disaster planning. Conclusion: PCCs in Pakistan need capacity building for specialized training in toxicology, toxicovigilance, chemical disaster planning, analytical laboratory tests and telephone service for consultation in poisoning cases.   How to cite this article: Khan NU, Mir MU, Khan UR, Khan AR, Ara J, Raja K, et al. The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building. Asia Pac J Med Toxicol 2014;3:31-5.

  5. The first stage of BFS integrated system for nuclear materials control and accounting. Final report

    International Nuclear Information System (INIS)

    1996-09-01

    The BFS computerized accounting system is a network-based one. It runs in a client/server mode. The equipment used in the system includes a computer network consisting of: One server computer system, including peripheral hardware and three client computer systems. The server is located near the control room of the BFS-2 facility outside of the 'stone sack' to ensure access during operation of the critical assemblies. Two of the client computer systems are located near the assembly tables of the BFS-1 and BFS-2 facilities while the third one being the Fissile Material Storage. This final report details the following topics: Computerized nuclear material accounting methods; The portal monitoring system; Test and evaluation of item control technology; Test and evaluation of radiation based nuclear material measurement equipment; and The integrated demonstration of nuclear material control and accounting methods

  6. The slightly-enriched spectral shift control reactor. Final report, September 30, 1988--September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Martin, W.R.; Lee, J.C.; Larsen, E.W. [Michigan Univ., Ann Arbor, MI (United States). Dept. of Nuclear Engineering; Edlund, M.C. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States). Dept. of Mechanical and Nuclear Engineering

    1991-11-01

    An advanced converter reactor design utilizing mechanical spectral shift control rods in a conventional pressurized water reactor configuration is under investigation. The design is based on the principle that a harder spectrum during the early part of the fuel cycle will result in large neutron captures in fertile {sup 238}U, which can then be burned in situ in a softer spectrum later in the cycle. Preliminary design calculations performed during FY 89 showed that the slightly-enriched spectral shift reactor design offers the benefit of substantially increased fuel resource utilization with the proven safety characteristics of the pressurized water reactor technology retained. Optimization of the fuel design and development of fuel management strategies were carried out in FY 90, along with effort to develop and validate neutronic methodology for tight-lattice configurations with hard spectra. During FY 91, the final year of the grant, the final Slightly-Enriched Spectral Shift Reactor (SESSR) design was determined, and reference design analyses were performed for the assemblies as well as the global core configuration, both at the beginning of cycle (BOC) and with depletion. The final SESSR design results in approximately a 20% increase in the utilization of uranium resources, based on equilibrium fuel cycle analyses. Acceptable pin power peaking is obtained with the final core design, with assembly peaking factors equal to less than 1.04 for spectral shift control rods both inserted and withdrawn, and global peaking factors at BOC predicted to be 1.4. In addition, a negative Moderation Temperature Coefficient (MTC) is maintained for BOC, which is difficult to achieve with conventional advanced converter designs based on a closed fuel cycle. The SESSR design avoids the need for burnable poison absorber, although they could be added if desired to increase the cycle length while maintaining a negative MTC.

  7. Size-controlled fluorescent nanodiamonds: A facile method of fabrication and color-center counting

    KAUST Repository

    Mahfouz, Remi

    2013-01-01

    We present a facile method for the production of fluorescent diamond nanocrystals (DNCs) of different sizes and efficiently quantify the concentration of emitting defect color centers (DCCs) of each DNC size. We prepared the DNCs by ball-milling commercially available micrometer-sized synthetic (high pressure, high temperature (HPHT)) diamonds and then separated the as-produced DNCs by density gradient ultracentrifugation (DGU) into size-controlled fractions. A protocol to enhance the uniformity of the nitrogen-vacancy (NV) centers in the diamonds was devised by depositing the DNCs as a dense monolayer on amino-silanized silicon substrates and then subjecting the monolayer to He+ beam irradiation. Using a standard confocal setup, we analyzed the average number of NV centers per crystal, and obtained a quantitative relationship between the DNC particle size and the NV number per crystal. This relationship was in good agreement with results from previous studies that used more elaborate setups. Our findings suggest that nanocrystal size separation by DGU may be used to control the number of defects per nanocrystal. The efficient approaches described herein to control and quantify DCCs are valuable to researchers as they explore applications for color centers and new strategies to create them. © 2013 The Royal Society of Chemistry.

  8. Final Environmental Assessment for the construction and operation of an office building at the Stanford Linear Accelerator Center. Part 2

    International Nuclear Information System (INIS)

    1995-08-01

    The Department of Energy (DOE) has prepared an Environmental Assessment (EA), DOE/EA-1107, analyzing the environmental effects relating to the construction and operation of an office building at the Stanford Linear Accelerator Center (SLAC). SLAC is a national facility operated by Stanford University, California, under contract with DOE. The center is dedicated to research in elementary particle physics and in those fields that make use of its synchrotron facilities. The objective for the construction and operation of an office building is to provide adequate office space for existing SLAC Waste Management (WM) personnel, so as to centralize WM personnel and to make WM operations more efficient and effective. Based on the analyses in the EA, the DOE has determined that the proposed action does not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA). Therefore, the preparation of an Environmental Impact Statement is not required. This report contains the Environmental Assessment, as well as the Finding of No Significant Impact (FONSI)

  9. Direct numerical control of machine tools in a nuclear research center by the CAMAC system

    International Nuclear Information System (INIS)

    Zwoll, K.; Mueller, K.D.; Becks, B.; Erven, W.; Sauer, M.

    1977-01-01

    The production of mechanical parts in research centers can be improved by connecting several numerically controlled machine tools to a central process computer via a data link. The CAMAC Serial Highway with its expandable structure yields an economic and flexible system for this purpose. The CAMAC System also facilitates the development of modular components controlling the machine tools itself. A CAMAC installation controlling three different machine tools connected to a central computer (PDP11) via the CAMAC Serial Highway is described. Besides this application, part of the CAMAC hardware and software can also be used for a great variety of scientific experiments

  10. NERI PROJECT 99-119. TASK 1. ADVANCED CONTROL TOOLS AND METHODS. FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    March-Leuba, J.A.

    2002-09-09

    Nuclear plants of the 21st century will employ higher levels of automation and fault tolerance to increase availability, reduce accident risk, and lower operating costs. Key developments in control algorithms, fault diagnostics, fault tolerance, and communication in a distributed system are needed to implement the fully automated plant. Equally challenging will be integrating developments in separate information and control fields into a cohesive system, which collectively achieves the overall goals of improved performance, safety, reliability, maintainability, and cost-effectiveness. Under the Nuclear Energy Research Initiative (NERI), the U. S. Department of Energy is sponsoring a project to address some of the technical issues involved in meeting the long-range goal of 21st century reactor control systems. This project, ''A New Paradigm for Automated Development Of Highly Reliable Control Architectures For Future Nuclear Plants,'' involves researchers from Oak Ridge National Laboratory, University of Tennessee, and North Carolina State University. This paper documents a research effort to develop methods for automated generation of control systems that can be traced directly to the design requirements. Our final goal is to allow the designer to specify only high-level requirements and stress factors that the control system must survive (e.g. a list of transients, or a requirement to withstand a single failure.) To this end, the ''control engine'' automatically selects and validates control algorithms and parameters that are optimized to the current state of the plant, and that have been tested under the prescribed stress factors. The control engine then automatically generates the control software from validated algorithms. Examples of stress factors that the control system must ''survive'' are: transient events (e.g., set-point changes, or expected occurrences such a load rejection,) and postulated

  11. 78 FR 12243 - Interim Final Determination To Stay and Defer Sanctions, Placer County Air Pollution Control...

    Science.gov (United States)

    2013-02-22

    ...EPA is making an interim final determination to stay the imposition of offset sanctions and to defer the imposition of highway sanctions based on a proposed approval of a revision to the Placer County Air Pollution Control District (PCAPCD) and Feather River Air Quality Management District (FRAQMD) portion of the California State Implementation Plan (SIP) published elsewhere in this Federal Register. The SIP revision concerns two permitting rules submitted by the PCAPCD and FRAQMD, respectively: Rule 502, New Source Review, and Rule 10.1, New Source Review.

  12. Comparison of quality control for trauma management between Western and Eastern European trauma center

    Directory of Open Access Journals (Sweden)

    Gambale Giorgio

    2008-11-01

    Full Text Available Abstract Background Quality control of trauma care is essential to define the effectiveness of trauma center and trauma system. To identify the troublesome issues of the system is the first step for validation of the focused customized solutions. This is a comparative study of two level I trauma centers in Italy and Romania and it has been designed to give an overview of the entire trauma care program adopted in these two countries. This study was aimed to use the results as the basis for recommending and planning changes in the two trauma systems for a better trauma care. Methods We retrospectively reviewed a total of 182 major trauma patients treated in the two hospitals included in the study, between January and June 2002. Every case was analyzed according to the recommended minimal audit filters for trauma quality assurance by The American College of Surgeons Committee on Trauma (ACSCOT. Results Satisfactory yields have been reached in both centers for the management of head and abdominal trauma, airway management, Emergency Department length of stay and early diagnosis and treatment. The main significant differences between the two centers were in the patients' transfers, the leadership of trauma team and the patients' outcome. The main concerns have been in the surgical treatment of fractures, the outcome and the lacking of documentation. Conclusion The analyzed hospitals are classified as Level I trauma center and are within the group of the highest quality level centers in their own countries. Nevertheless, both of them experience major lacks and for few audit filters do not reach the mmum standard requirements of ACS Audit Filters. The differences between the western and the eastern European center were slight. The parameters not reaching the minimum requirements are probably occurring even more often in suburban settings.

  13. Engineering of Fermi level by nin diamond junction for control of charge states of NV centers

    Science.gov (United States)

    Murai, T.; Makino, T.; Kato, H.; Shimizu, M.; Murooka, T.; Herbschleb, E. D.; Doi, Y.; Morishita, H.; Fujiwara, M.; Hatano, M.; Yamasaki, S.; Mizuochi, N.

    2018-03-01

    The charge-state control of nitrogen-vacancy (NV) centers in diamond is very important toward its applications because the NV centers undergo stochastic charge-state transitions between the negative charge state (NV-) and the neutral charge state (NV0) of the NV center upon illumination. In this letter, engineering of the Fermi level by a nin diamond junction was demonstrated for the control of the charge state of the NV centers in the intrinsic (i) layer region. By changing the size (d) of the i-layer region between the phosphorus-doped n-type layer regions (nin) from 2 μm to 10 μm, we realized the gradual change in the NV- charge-state population in the i-layer region from 60% to 80% under 532 nm excitation, which can be attributed to the band bending in the i-layer region. Also, we quantitatively simulated the changes in the Fermi level in the i-layer region depending on d with various concentrations of impurities in the i-layer region.

  14. Voice Over Internet Protocol (VoIP) in a Control Center Environment

    Science.gov (United States)

    Pirani, Joseph; Calvelage, Steven

    2010-01-01

    The technology of transmitting voice over data networks has been available for over 10 years. Mass market VoIP services for consumers to make and receive standard telephone calls over broadband Internet networks have grown in the last 5 years. While operational costs are less with VoIP implementations as opposed to time division multiplexing (TDM) based voice switches, is it still advantageous to convert a mission control center s voice system to this newer technology? Marshall Space Flight Center (MSFC) Huntsville Operations Support Center (HOSC) has converted its mission voice services to a commercial product that utilizes VoIP technology. Results from this testing, design, and installation have shown unique considerations that must be addressed before user operations. There are many factors to consider for a control center voice design. Technology advantages and disadvantages were investigated as they refer to cost. There were integration concerns which could lead to complex failure scenarios but simpler integration for the mission infrastructure. MSFC HOSC will benefit from this voice conversion with less product replacement cost, less operations cost and a more integrated mission services environment.

  15. Job Demand and Control Interventions: A Stakeholder-Centered Best-Evidence Synthesis of Systematic Reviews on Workplace Disability

    Directory of Open Access Journals (Sweden)

    K Williams-Whitt

    2015-04-01

    Full Text Available Background: Physical and psychological job demands in combination with the degree of control a worker has over task completion, play an important role in reducing stress. Occupational stress is an important, modifiable factor affecting work disability. However, the effectiveness of reducing job demands or increasing job control remains unclear, particularly for outcomes of interest to employers, such as absenteeism or productivity. Objective: This systematic review reports on job demand and control interventions that impact absenteeism, productivity and financial outcomes. Methods: A stakeholder-centered best-evidence synthesis was conducted with researcher and stakeholder collaboration throughout. Databases and grey literature were searched for systematic reviews between 2000 and 2012: Medline, EMBASE, the Cochrane Database of Systematic Reviews, DARE, CINAHL, PsycINFO, TRIP, health-evidence.ca, Rehab+, National Rehabilitation Information Center (NARIC, and Institute for Work and Health. Articles were assessed independently by two researchers for inclusion criteria and methodological quality. Differences were resolved through consensus. Results: The search resulted in 3363 unique titles. After review of abstracts, 115 articles were retained for full-text review. 11 articles finally met the inclusion criteria and are summarized in this synthesis. The best level of evidence we found indicates that multimodal job demand reductions for either at-work or off-work workers will reduce disability-related absenteeism. Conclusion: In general, the impacts of interventions that aim to reduce job demands or increase job control can be positive for the organization in terms of reducing absenteeism, increasing productivity and cost-effectiveness. However, more high quality research is needed to further assess the relationships and quantify effect sizes for the interventions and outcomes reviewed in this study.

  16. Job demand and control interventions: a stakeholder-centered best-evidence synthesis of systematic reviews on workplace disability.

    Science.gov (United States)

    Williams-Whitt, K; White, M I; Wagner, S L; Schultz, I Z; Koehn, C; Dionne, C E; Koehoorn, M; Harder, H; Pasca, R; Warje, O; Hsu, V; McGuire, L; Schulz, W; Kube, D; Hook, A; Wright, M D

    2015-04-01

    Physical and psychological job demands in combination with the degree of control a worker has over task completion, play an important role in reducing stress. Occupational stress is an important, modifiable factor affecting work disability. However, the effectiveness of reducing job demands or increasing job control remains unclear, particularly for outcomes of interest to employers, such as absenteeism or productivity. This systematic review reports on job demand and control interventions that impact absenteeism, productivity and financial outcomes. A stakeholder-centered best-evidence synthesis was conducted with researcher and stakeholder collaboration throughout. Databases and grey literature were searched for systematic reviews between 2000 and 2012: Medline, EMBASE, the Cochrane Database of Systematic Reviews, DARE, CINAHL, PsycINFO, TRIP, health-evidence.ca, Rehab+, National Rehabilitation Information Center (NARIC), and Institute for Work and Health. Articles were assessed independently by two researchers for inclusion criteria and methodological quality. Differences were resolved through consensus. The search resulted in 3363 unique titles. After review of abstracts, 115 articles were retained for full-text review. 11 articles finally met the inclusion criteria and are summarized in this synthesis. The best level of evidence we found indicates that multimodal job demand reductions for either at-work or off-work workers will reduce disability-related absenteeism. In general, the impacts of interventions that aim to reduce job demands or increase job control can be positive for the organization in terms of reducing absenteeism, increasing productivity and cost-effectiveness. However, more high quality research is needed to further assess the relationships and quantify effect sizes for the interventions and outcomes reviewed in this study.

  17. Final Test of the W7-X Control Coils Power Supply and its Integration into the Overall Control Environment

    International Nuclear Information System (INIS)

    Fuellenbach, F.; Rummel, T.; Pingel, S.; Laqua, H.; Mueller, I.; Jauregi, E.

    2006-01-01

    In order to be able to vary the magnetic configuration of WENDELSTEIN 7-X (W7-X) at the plasma edge and allow sweeping of the power across the divertor target plates 10 '' control coils '' are installed inside the plasma vessel behind the baffle plates of the divertor. The coils are made of a hollow copper profile with eight turns each. The dimensions of the coils are 2,05 m x 0,35 m x 0,35 m with a three dimensional shape to fit into the narrow space between the baffles and the wall of the plasma vessel. Each of the ten coils is supplied by independent power supplies each providing bi-directionally a direct current of 2500 A with high accuracy and low ripple. To allow sweeping the power deposition from the plasma across the target plates the power supplies provide an alternating current of up to 625 A with frequencies up to 20 Hz which is synchronised between the ten supplies in order to maintain the symmetry of the magnetic field. The total output current of a power supply is a superposition of a direct current and an alternating current, where both parts have to be independently adjustable. JEMA, Spain provided the complete set of power supplies which are based on 10 independent four-quadrant power supplies with a link rectifier and includes a cooling water unit, a dedicated distribution and a central control and visualization system. All ten power supply units and auxiliary systems have meanwhile been installed and finally tested at the W7-X site in Greifswald. The paper focuses on the results of the final tests and measures to integrate the power supply system to the overall control system including the central PLC and PC's for experiment control, data acquisition- and security systems. (author)

  18. Free-Piston Stirling Convertor Controller Development at NASA Glenn Research Center

    Science.gov (United States)

    Regan, Timothy

    2004-01-01

    The free-piston Stirling convertor end-to-end modeling effort at NASA Glenn Research Center (GRC) has produced a software-based test bed in which free-piston Stirling convertors can be simulated and evaluated. The simulation model includes all the components of the convertor - the Stirling cycle engine, linear alternator, controller, and load. This paper is concerned with controllers. It discusses three controllers that have been studied using this model. Case motion has been added to the model recently so that effects of differences between convertor components can be simulated and ameliorative control engineering techniques can be developed. One concern when applying a system comprised of interconnected mass-spring-damper components is to prevent operation in any but the intended mode. The design mode is the only desired mode of operation, but all other modes are considered in controller design.

  19. ONAV - An Expert System for the Space Shuttle Mission Control Center

    Science.gov (United States)

    Mills, Malise; Wang, Lui

    1992-01-01

    The ONAV (Onboard Navigation) Expert System is being developed as a real-time console assistant to the ONAV flight controller for use in the Mission Control Center at the Johnson Space Center. Currently, Oct. 1991, the entry and ascent systems have been certified for use on console as support tools, and were used for STS-48. The rendezvous system is in verification with the goal to have the system certified for STS-49, Intelsat retrieval. To arrive at this stage, from a prototype to real-world application, the ONAV project has had to deal with not only Al issues but operating environment issues. The Al issues included the maturity of Al languages and the debugging tools, verification, and availability, stability and size of the expert pool. The environmental issues included real time data acquisition, hardware suitability, and how to achieve acceptance by users and management.

  20. Controlled coupling of NV defect centers to plasmonic and photonic nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Barth, Michael, E-mail: michael.barth@physik.hu-berlin.d [Institute of Physics, Humboldt-Universitaet zu Berlin, Hausvogteiplatz 5-7, D-10117 Berlin (Germany); Schietinger, Stefan; Schroeder, Tim; Aichele, Thomas; Benson, Oliver [Institute of Physics, Humboldt-Universitaet zu Berlin, Hausvogteiplatz 5-7, D-10117 Berlin (Germany)

    2010-09-15

    Nitrogen-vacancy (NV) defect centers in diamond have recently emerged as promising candidates for a number of applications in the fields of quantum optics and quantum information, such as single photon generation and spin qubit operations. The performance of these defect centers can strongly be enhanced through coupling to plasmonic and photonic nanostructures, such as metal particles and optical microcavities. Here, we demonstrate the controlled assembly of such hybrid structures via manipulation with scanning near-field probes. In particular, we investigate the plasmonic enhancement of the single photon emission through coupling to gold nanospheres as well as the coupling of diamond nanocrystals to the optical modes of microsphere resonators and photonic crystal cavities. These systems represent prototypes of fundamental nanophotonic/plasmonic elements and provide control on the generation and coherent transfer of photons on the level of a single quantum emitter.

  1. [Using the subcutaneous approach for symptoms control in a health center].

    Science.gov (United States)

    Pascual López, L; Portaceli Armiñana, A; Ros Sáez, A

    2001-01-01

    To describe the use of the subcutaneous tract for symptoms control in patients those are in phase of palliative treatment of their illness. Observational study. Primary care. Patients seen in a health center, in phase of palliative treatment of their illness, that needed for symptoms control the subcutaneous administration of drugs. Most of the patients were in terminal phase (19), the fundamental cause (17 cases) that justified the use of the subcutaneous tract was the difficulty to take drugs by oral tract in the last days of life, attention on death throes. The infusion continuous through injector type travenol, at an infusion speed of 2 ml/h, it was the most common way of drug administration (19 patients). The drugs and initial average dose most used were: morphine 19 patients dose 100 mg/24 h, hyoscine butylbromide (Buscapina), 13 patients, 60 mg/24 h, haloperidol 12 patients, 4 mg/24 h. The patients death was the main cause that justified the retirement of the continuous infusion (17 people sick), happening in its own home. Symptoms control was good or very good in the most of patients (14). The experience on using the subcutaneous tract for symptoms control in our health center is positive, being the fundamental cause for its use symptoms control in the last days of the patients life. The continuous subcutaneous infusion should be used in primary attention, as an usual technique for the symptoms control in patients that are in phase of palliative treatment of their illness.

  2. The Centers for Disease Control program to prevent primary and secondary disabilities in the United States.

    OpenAIRE

    Houk, V N; Thacker, S B

    1989-01-01

    The Disabilities Prevention Program builds on traditional Centers for Disease Control (CDC) strengths in public health surveillance, epidemiology, and technology transfer to State and local governments in translating the findings of research into prevention programs. The objectives of the CDC program are to provide a national focus for the prevention of primary and secondary disabilities, build capacity at the State and community levels to maintain programs to prevent disabilities, and increa...

  3. Centers for Disease Control and Prevention (CDC) Radiation Hazard Scale Data Product Review Feedback Report

    Energy Technology Data Exchange (ETDEWEB)

    Askin, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Buddemeier, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Alai, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Yu, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-09-20

    In support of the Department of Energy (DOE) National nuclear Security Administration (NNSA) and the Centers for Disease Control and Prevention (CDC), Lawrence Livermore National Laboratory (LLNL) assisted in the development of new data templates for disseminating and communicating FRMAC1 data products using the CDC Radiation Hazard Scale communication tool. To ensure these data products will be useful to stakeholders during a radiological emergency, LLNL facilitated opportunities for product socialization and review.

  4. Person-centered care planning and service engagement: a study protocol for a randomized controlled trial.

    Science.gov (United States)

    Stanhope, Victoria; Tondora, Janis; Davidson, Larry; Choy-Brown, Mimi; Marcus, Steven C

    2015-04-22

    Service disengagement is a pervasive challenge the mental health care system faces. Mental health services are of little value should persons with mental illnesses continue to opt out of receiving them. Consumers attribute disengagement from care to an absence of choice in their treatment. In response, the mental health system is adopting a person-centered model, based upon recovery principles, to engage consumers more actively in their care. Person-centered care planning is a promising practice involving collaboration to develop and implement an actionable plan to assist the person in achieving personal recovery goals. This study design combines a parallel-group randomized controlled trial of community mental health organizations with qualitative methods to assess the effectiveness of person-centered care planning. Participants at 14 sites in Delaware and Connecticut will be randomized to treatment as usual or the person-centered care planning intervention. Participants will be in leadership (n = 70) or supervisory or direct care (n = 210) roles. The person-centered care planning intervention involves intensive staff training and 12 months of ongoing technical assistance. Quantitative survey data will be collected at baseline, 6 months and 12 months measuring person-centered care planning competency and organizational factors. Consumer outcomes (engagement, medication adherence, functioning and consumer satisfaction) will be assessed by Medicaid and state-level data. Qualitative data focused on process factors will include staff and consumer interviews and focus groups. In this intent-to-treat analysis, we will use mixed-effects multivariate regression models to evaluate the differential impact of the person-centered care planning intervention on each consumer and implementation outcome as well as the extent to which clinician assessments of organizational factors are associated with the implementation outcome. Mixed methods will triangulate and strengthen the

  5. Test Platform for Advanced Digital Control of Brushless DC Motors (MSFC Center Director's Discretionary Fund)

    Science.gov (United States)

    Gwaltney, D. A.

    2002-01-01

    A FY 2001 Center Director's Discretionary Fund task to develop a test platform for the development, implementation. and evaluation of adaptive and other advanced control techniques for brushless DC (BLDC) motor-driven mechanisms is described. Important applications for BLDC motor-driven mechanisms are the translation of specimens in microgravity experiments and electromechanical actuation of nozzle and fuel valves in propulsion systems. Motor-driven aerocontrol surfaces are also being utilized in developmental X vehicles. The experimental test platform employs a linear translation stage that is mounted vertically and driven by a BLDC motor. Control approaches are implemented on a digital signal processor-based controller for real-time, closed-loop control of the stage carriage position. The goal of the effort is to explore the application of advanced control approaches that can enhance the performance of a motor-driven actuator over the performance obtained using linear control approaches with fixed gains. Adaptive controllers utilizing an exact model knowledge controller and a self-tuning controller are implemented and the control system performance is illustrated through the presentation of experimental results.

  6. Final Environmental Impact Statement for the construction and operation of Claiborne Enrichment Center, Homer, Louisiana (Docket No. 70-3070)

    Energy Technology Data Exchange (ETDEWEB)

    Zeitoun, A. [Science Applications International Corp., Germantown, MD (United States)

    1994-08-01

    This two-volume Final Environmental Impact Statement (FEIS) was prepared by the Nuclear Regulatory Commission (NRC) in accordance with regulation 10 CFR Part 51, which implements the National Environmental Policy Act (NEPA). Volume 1 contains the assessment of the potential environmental impacts for licensing the construction and operation of a proposed gaseous centrifuge enrichment facility to be built in Claiborne Parish, Louisiana, by Louisiana Energy Services, LP. (LES). The proposed facility would have a production capacity of about 866 metric tons annually of up to 5 weight percent enriched UF{sub 6}, using a proven centrifuge technology. Included in the assessment are construction, both normal operations and potential accidents (internal and external events), and the eventual decontamination and decommissioning (D&D)- of the site. Issues addressed include the purpose and need for the facility, the alternatives to the proposed action, potential disposition of the tails, the site selection process, and environmental justice. The NRC staff concludes that the facility can be constructed and operated with small and acceptable impacts on the public and the environment. The FEIS supports issuance of a license to the applicant, Louisiana Energy Services, to authorize construction and operation of the proposed facility.

  7. 75 FR 4830 - Advisory Committee to the Director (ACD), Centers for Disease Control (CDC) and Prevention-Ethics...

    Science.gov (United States)

    2010-01-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Committee to the Director (ACD), Centers for Disease Control (CDC) and Prevention--Ethics Subcommittee (ES..., CDC, regarding a broad range of public health ethics questions and issues arising from programs...

  8. 76 FR 57744 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)-Ethics...

    Science.gov (United States)

    2011-09-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)--Ethics Subcommittee (ES) Correction: This notice was published in the Federal Register on September 8, 2011, Volume 76, Number 174...

  9. 77 FR 41188 - Advisory Committee on Breast Cancer in Young Women, Centers for Disease Control and Prevention...

    Science.gov (United States)

    2012-07-12

    ... Committee on Breast Cancer in Young Women, Centers for Disease Control and Prevention: Notice of Charter..., that the Advisory Committee on Breast Cancer in Young Women, Centers for Disease Control and Prevention... Committee on Breast Cancer in Young Women, HHS, CDC, 4770 Buford Highway, NE., Mailstop K52, Atlanta...

  10. Mathematical model for adaptive control system of ASEA robot at Kennedy Space Center

    Science.gov (United States)

    Zia, Omar

    1989-01-01

    The dynamic properties and the mathematical model for the adaptive control of the robotic system presently under investigation at Robotic Application and Development Laboratory at Kennedy Space Center are discussed. NASA is currently investigating the use of robotic manipulators for mating and demating of fuel lines to the Space Shuttle Vehicle prior to launch. The Robotic system used as a testbed for this purpose is an ASEA IRB-90 industrial robot with adaptive control capabilities. The system was tested and it's performance with respect to stability was improved by using an analogue force controller. The objective of this research project is to determine the mathematical model of the system operating under force feedback control with varying dynamic internal perturbation in order to provide continuous stable operation under variable load conditions. A series of lumped parameter models are developed. The models include some effects of robot structural dynamics, sensor compliance, and workpiece dynamics.

  11. Hypertension Control and co-morbidities in primary health care centers in Riyadh

    Energy Technology Data Exchange (ETDEWEB)

    Al-Tuwijri, Abdulmohsin A [Dept. of Family Medicine, Ministry of Health, Riyadh (Saudi Arabia); Al-Rukban, Mohammed Othman [Dept. of Family and Community Medicine, Coll. of Medicine, King Saud Univ., Riyadh (Saudi Arabia)

    2006-07-01

    The prevalence of hypertension in Saudi Arabia has been assessed only in preliminary reports. The aim of this study was to determine the degree of control of blood pressure and the prevalence of common hypertension co-morbidities among hypertensive patients attending primary health care (PHC) centers in Riyadh. A cross sectional study was conducted by reviewing medical records of hypertensive patients during May and June 2001. Two hundred fifty-five medical records selected by a stratified randomization process according to the distribution of the 73 PHC centers in the city and the total number of hypertensive patients registered in the mini-clinic of each PHC-center. Trained mini-clinic nurses collected data using a data collection form developed for this purpose. Of 255 patients, 121 (47.5%) were males and 134 (52.5%) were females, the mean age was 57.2+-11.1 years and 8.3% were smokers. The majority 204 (85.7%) had greater than normal body weight. Only 101 (40.4%) had controlled systolic BP. The most common co-morbidity was diabetes mellitus found in 98 (38.4%), followed by dislipidemia in 50 (19.6%), bronchial asthma in 28 (11.0%) and renal diseases in 12 (4.7%). Except for osteoporosis, which was reported by females only (P=0.003), the occurrences of hypertensive co-morbidities did not vary from other demographic characteristics. This study demonstrated poor blood pressure control in the mini-clinics in the PHC-centers. To improve the quality of care for hypertensive patients, we recommend an improvement in PHC physician knowledge of and attitudes toward the importance of achieving targeted blood pressure levels. (author)

  12. Hypertension Control and co-morbidities in primary health care centers in Riyadh

    International Nuclear Information System (INIS)

    Al-Tuwijri, Abdulmohsin A.; Al-Rukban, Mohammed Othman

    2006-01-01

    The prevalence of hypertension in Saudi Arabia has been assessed only in preliminary reports. The aim of this study was to determine the degree of control of blood pressure and the prevalence of common hypertension co-morbidities among hypertensive patients attending primary health care (PHC) centers in Riyadh. A cross sectional study was conducted by reviewing medical records of hypertensive patients during May and June 2001. Two hundred fifty-five medical records selected by a stratified randomization process according to the distribution of the 73 PHC centers in the city and the total number of hypertensive patients registered in the mini-clinic of each PHC-center. Trained mini-clinic nurses collected data using a data collection form developed for this purpose. Of 255 patients, 121 (47.5%) were males and 134 (52.5%) were females, the mean age was 57.2+-11.1 years and 8.3% were smokers. The majority 204 (85.7%) had greater than normal body weight. Only 101 (40.4%) had controlled systolic BP. The most common co-morbidity was diabetes mellitus found in 98 (38.4%), followed by dislipidemia in 50 (19.6%), bronchial asthma in 28 (11.0%) and renal diseases in 12 (4.7%). Except for osteoporosis, which was reported by females only (P=0.003), the occurrences of hypertensive co-morbidities did not vary from other demographic characteristics. This study demonstrated poor blood pressure control in the mini-clinics in the PHC-centers. To improve the quality of care for hypertensive patients, we recommend an improvement in PHC physician knowledge of and attitudes toward the importance of achieving targeted blood pressure levels. (author)

  13. Numerical analysis of thermal environment control in high density data center

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Oh Kyung; Kim, Hyeon Joong; Cha, Dong An [Korea Institute of Industrial Technology, Cheonan (Korea, Republic of)

    2012-08-15

    Increasing heat generation in CPUs can hamper effective recirculation and by pass because of the large temperature difference between the exhaust and the intake air through a server room. This increases the overall temperature inside a data center and decreases the efficiency of the data center's cooling system. The purpose of the data center's cooling system is to separate the intake and exhaust air by controlling the computer room air conditioner(CRAC). In this study, ICEPAK is used to conduct a numerical analysis of a data center's cooling system. The temperature distribution and the entire room are analyzed for different volumetric flow rates. The optimized volumetric flow rate is found for each CPU power. The heat removal and temperature distribution for CPU powers of 100, 120, and 140W are found to be the best for a volumetric flow rate of 0.15m'3'/s. The numerical analysis is verified through RTI indicators, and the results appear to be the most reliable when the RTI value is 81.

  14. Quality control in the low activity radioanalytical laboratory of the Environmental Division, DIEAM.CN of NUCLEBRAS Research Center - CDTN

    International Nuclear Information System (INIS)

    Carvalho, M.A.G. de

    1988-01-01

    The Environmental Engineering Division - DIEAM.CN of NUCLEBRAS research center - CTDN, is in charge of the routine work related to the analysis of environment samples collected at several NUCLEBRAS facilities. This paper presents the procedures used for quality control of the analyses performed at the Laboratory. The samples are initially verified and recorded as soon as they arrive at the Division. From then on, each aliquot and each analysis will be controlled using a follow-up sheet. Once a year, the operational conditions of the Lab couting systems are verified thoroughly. At that time, the systems are calibrated using certified radioactivity standards. Performance of the detectors is checked using control graphs, which can indicate the need for specific procedures to be followed such as maintenance, decontamination or recalibration. In order to reduce the risk of mistakes and to increase the capacity for global data evaluation, a microcomputer is used for processing the counting data and for editing a final report. (author) [pt

  15. ADVANCED BIOMASS REBURNING FOR HIGH EFFICIENCY NOx CONTROL AND BIOMASS REBURNING - MODELING/ENGINEERING STUDIES JOINT FINAL REPORT; FINAL

    International Nuclear Information System (INIS)

    Vladimir M Zamansky; Mark S. Sheldon; Vitali V. Lissianski; Peter M. Maly; David K. Moyeda; Antonio Marquez; W. Randall Seeker

    2000-01-01

    This report presents results of studies under a Phase II SBIR program funded by the U. S. Department of Agriculture, and a closely coordinated project sponsored by the DOE National Energy Technology Laboratory (NETL, formerly FETC). The overall Phase II objective of the SBIR project is to experimentally optimize the biomass reburning technologies and conduct engineering design studies needed for process demonstration at full scale. The DOE project addresses supporting issues for the process design including modeling activities, economic studies of biomass handling, and experimental evaluation of slagging and fouling. The performance of biomass has been examined in a 300 kW (1 x 10(sup 6) Btu/hr) Boiler Simulator Facility under different experimental conditions. Fuels under investigation include furniture waste, willow wood and walnut shells. Tests showed that furniture pellets and walnut shells provided similar NO(sub x) control as that of natural gas in basic reburning at low heat inputs. Maximum NO(sub x) reduction achieved with walnut shell and furniture pellets was 65% and 58% respectively. Willow wood provided a maximum NO(sub x) reduction of 50% and was no better than natural gas at any condition tested. The efficiency of biomass increases when N-agent is injected into reburning and/or burnout zones, or along with OFA (Advanced Reburning). Co-injection of Na(sub 2)CO(sub 3) with N-agent further increases efficiency of NO(sub x) reduction. Maximum NO(sub x) reduction achieved with furniture pellets and willow wood in Advanced Reburning was 83% and 78% respectively. All combustion experiments of the Phase II project have been completed. All objectives of the experimental tasks were successfully met. The kinetic model of biomass reburning has been developed. Model agrees with experimental data for a wide range of initial conditions and thus correctly represents main features of the reburning process. Modeling suggests that the most important factors that provide

  16. Schedules of controlled substances: temporary placement of three synthetic cannabinoids into Schedule I. Final order.

    Science.gov (United States)

    2013-05-16

    The Deputy Administrator of the Drug Enforcement Administration (DEA) is issuing this final order to temporarily schedule three synthetic cannabinoids under the Controlled Substances Act (CSA) pursuant to the temporary scheduling provisions of 21 U.S.C. 811(h). The substances are (1-pentyl-1H-indol-3-yl)(2,2,3,3-tetramethylcyclopropyl)methanone (UR-144), [1-(5-fluoro-pentyl)-1H-indol-3-yl](2,2,3,3-tetramethylcyclopropyl)methanone (5-fluoro-UR-144, XLR11) and N-(1-adamantyl)-1-pentyl-1H-indazole-3-carboxamide (APINACA, AKB48). This action is based on a finding by the Deputy Administrator that the placement of these synthetic cannabinoids and their salts, isomers and salts of isomers into Schedule I of the CSA is necessary to avoid an imminent hazard to the public safety. As a result of this order, the full effect of the CSA and the Controlled Substances Import and Export Act (CSIEA) and their implementing regulations including criminal, civil and administrative penalties, sanctions and regulatory controls of Schedule I substances will be imposed on the manufacture, distribution, possession, importation, and exportation of these synthetic cannabinoids.

  17. Ayahuasca Exposure: Descriptive Analysis of Calls to US Poison Control Centers from 2005 to 2015.

    Science.gov (United States)

    Heise, C William; Brooks, Daniel E

    2017-09-01

    Ayahuasca is a hallucinogenic plant preparation which usually contains the vine Banisteriopsis caapi and the shrub Psychotria viridis. This tea originates from the Amazon Basin where it is used in religious ceremonies. Because interest in these religious groups spreading as well as awareness of use of ayahuasca for therapeutic and recreational purposes, its use is increasing. Banisteriopsis caapi is rich in β-carbolines, especially harmine, tetrahydroharmine and harmaline, which have monoamine oxidase inhibiting (MAOI) activity. Psychotria viridis contains the 5HT2A/2C/1A receptor agonist hallucinogen N,N-dimethyltryptamine (DMT). Usual desired effects include hallucination, dissociation, mood alteration and perception change. Undesired findings previously reported are nausea, vomiting, hypertension, and tachycardia. All human exposure calls reported to the American Association of Poison Controls Centers' (AAPCC) National Poison Data System (NPDS) between September 1, 2005 and September 1, 2015 were reviewed. Cases were filtered for specific plant derived ayahuasca-related product codes. Abstracted data included the following: case age and gender, exposure reason, exposure route, clinical manifestations, treatments given, medical outcomes and fatality. Five hundred and thirty-eight exposures to ayahuasca botanical products were reported. The majority of the calls to poison control centers came from healthcare facilities (83%). The most common route of exposure was ingestion. Most cases were men (437, 81%, 95% CI 77.7% - 84.3%). The median age was 21 (IQR 18-29). Most exposures were acute. Three hundred thirty-seven (63%) were reported to have a major or moderate clinical effect. The most common clinical manifestations reported were hallucinations (35%), tachycardia (34%), agitation (34%), hypertension (16%), mydriasis (13%) and vomiting (6%). Benzodiazepines were commonly given (30%). There were 28 cases in the series who required endotracheal intubation (5

  18. Internet Protocol Display Sharing Solution for Mission Control Center Video System

    Science.gov (United States)

    Brown, Michael A.

    2009-01-01

    With the advent of broadcast television as a constant source of information throughout the NASA manned space flight Mission Control Center (MCC) at the Johnson Space Center (JSC), the current Video Transport System (VTS) characteristics provides the ability to visually enhance real-time applications as a broadcast channel that decision making flight controllers come to rely on, but can be difficult to maintain and costly. The Operations Technology Facility (OTF) of the Mission Operations Facility Division (MOFD) has been tasked to provide insight to new innovative technological solutions for the MCC environment focusing on alternative architectures for a VTS. New technology will be provided to enable sharing of all imagery from one specific computer display, better known as Display Sharing (DS), to other computer displays and display systems such as; large projector systems, flight control rooms, and back supporting rooms throughout the facilities and other offsite centers using IP networks. It has been stated that Internet Protocol (IP) applications are easily readied to substitute for the current visual architecture, but quality and speed may need to be forfeited for reducing cost and maintainability. Although the IP infrastructure can support many technologies, the simple task of sharing ones computer display can be rather clumsy and difficult to configure and manage to the many operators and products. The DS process shall invest in collectively automating the sharing of images while focusing on such characteristics as; managing bandwidth, encrypting security measures, synchronizing disconnections from loss of signal / loss of acquisitions, performance latency, and provide functions like, scalability, multi-sharing, ease of initial integration / sustained configuration, integration with video adjustments packages, collaborative tools, host / recipient controllability, and the utmost paramount priority, an enterprise solution that provides ownership to the whole

  19. Calls to Florida Poison Control Centers about mercury: Trends over 2003-2013.

    Science.gov (United States)

    Gribble, Matthew O; Deshpande, Aniruddha; Stephan, Wendy B; Hunter, Candis M; Weisman, Richard S

    2017-11-01

    The aim of this analysis was to contrast trends in exposure-report calls and informational queries (a measure of public interest) about mercury to the Florida Poison Control Centers over 2003-2013. Poison-control specialists coded calls to Florida Poison Control Centers by substance of concern, caller demographics, and whether the call pertained to an exposure event or was an informational query. For the present study, call records regarding mercury were de-identified and provided along with daily total number of calls for statistical analysis. We fit Poisson models using generalized estimating equations to summarize changes across years in counts of daily calls to Florida Poison Control Centers, adjusting for month. In a second stage of analysis, we further adjusted for the total number of calls each day. We also conducted analyses stratified by age of the exposed. There was an overall decrease over 2003-2013 in the number of total calls about mercury [Ratio per year: 0.89, 95% CI: (0.88, 0.90)], and calls about mercury exposure [Ratio per year: 0.84, 95% CI: (0.83, 0.85)], but the number of informational queries about mercury increased over this time [Ratio per year: 1.15 (95% CI: 1.12, 1.18)]. After adjusting for the number of calls of that type each day (e.g., call volume), the associations remained similar: a ratio of 0.88 (95% CI: 0.87, 0.89) per year for total calls, 0.85 (0.83, 0.86) for exposure-related calls, and 1.17 (1.14, 1.21) for informational queries. Although, the number of exposure-related calls decreased, informational queries increased over 2003-2013. This might suggest an increased public interest in mercury health risks despite a decrease in reported exposures over this time period. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Patient-centered recruitment and retention for a randomized controlled study.

    Science.gov (United States)

    Chhatre, Sumedha; Jefferson, Ashlie; Cook, Ratna; Meeker, Caitlin R; Kim, Ji Hyun; Hartz, Kayla Marie; Wong, Yu-Ning; Caruso, Adele; Newman, Diane K; Morales, Knashawn H; Jayadevappa, Ravishankar

    2018-03-27

    Recruitment and retention strategies for patient-centered outcomes research are evolving and research on the subject is limited. In this work, we present a conceptual model of patient-centered recruitment and retention, and describe the recruitment and retention activities and related challenges in a patient-centered comparative effectiveness trial. This is a multicenter, longitudinal randomized controlled trial in localized prostate cancer patients. We recruited 743 participants from three sites over 15 months period (January 2014 to March 2015), and followed them for 24 months. At site 1, of the 773 eligible participants, 551 (72%) were enrolled. At site 2, 34 participants were eligible and 23 (68%) enrolled. Of the 434 eligible participants at site 3, 169 (39%) enrolled. We observed that strategies related to the concepts of trust (e.g., physician involvement, ensuring protection of information), communication (e.g., brochures and pamphlets in physicians' offices, continued contact during regular clinic visits and calling/emailing assessment), attitude (e.g., emphasizing the altruistic value of research, positive attitude of providers and research staff), and expectations (e.g., full disclosure of study requirements and time commitment, update letters) facilitated successful patient recruitment and retention. A stakeholders' advisory board provided important input for the recruitment and retention activities. Active engagement, reminders at the offices, and personalized update letters helped retention during follow-up. Usefulness of telephone recruitment was site specific and, at one site, the time requirement for telephone recruitment was a challenge. We have presented multilevel strategies for successful recruitment and retention in a clinical trial using a patient-centered approach. Our strategies were flexible to accommodate site-level requirements. These strategies as well as the challenges can aid recruitment and retention efforts of future large

  1. NASA Marshall Space Flight Center Controls Systems Design and Analysis Branch

    Science.gov (United States)

    Gilligan, Eric

    2014-01-01

    Marshall Space Flight Center maintains a critical national capability in the analysis of launch vehicle flight dynamics and flight certification of GN&C algorithms. MSFC analysts are domain experts in the areas of flexible-body dynamics and control-structure interaction, thrust vector control, sloshing propellant dynamics, and advanced statistical methods. Marshall's modeling and simulation expertise has supported manned spaceflight for over 50 years. Marshall's unparalleled capability in launch vehicle guidance, navigation, and control technology stems from its rich heritage in developing, integrating, and testing launch vehicle GN&C systems dating to the early Mercury-Redstone and Saturn vehicles. The Marshall team is continuously developing novel methods for design, including advanced techniques for large-scale optimization and analysis.

  2. Optical and microwave control of germanium-vacancy center spins in diamond

    Science.gov (United States)

    Siyushev, Petr; Metsch, Mathias H.; Ijaz, Aroosa; Binder, Jan M.; Bhaskar, Mihir K.; Sukachev, Denis D.; Sipahigil, Alp; Evans, Ruffin E.; Nguyen, Christian T.; Lukin, Mikhail D.; Hemmer, Philip R.; Palyanov, Yuri N.; Kupriyanov, Igor N.; Borzdov, Yuri M.; Rogers, Lachlan J.; Jelezko, Fedor

    2017-08-01

    A solid-state system combining a stable spin degree of freedom with an efficient optical interface is highly desirable as an element for integrated quantum-optical and quantum-information systems. We demonstrate a bright color center in diamond with excellent optical properties and controllable electronic spin states. Specifically, we carry out detailed optical spectroscopy of a germanium-vacancy (GeV ) color center demonstrating optical spectral stability. Using an external magnetic field to lift the electronic spin degeneracy, we explore the spin degree of freedom as a controllable qubit. Spin polarization is achieved using optical pumping, and a spin relaxation time in excess of 20 μ s is demonstrated. We report resonant microwave control of spin transitions, and use this as a probe to measure the Autler-Townes effect in a microwave-optical double-resonance experiment. Superposition spin states were prepared using coherent population trapping, and a pure dephasing time of about 19 ns was observed at a temperature of 2.0 K.

  3. Control of final moisture content of food products baked in continuous tunnel ovens

    Science.gov (United States)

    McFarlane, Ian

    2006-02-01

    There are well-known difficulties in making measurements of the moisture content of baked goods (such as bread, buns, biscuits, crackers and cake) during baking or at the oven exit; in this paper several sensing methods are discussed, but none of them are able to provide direct measurement with sufficient precision. An alternative is to use indirect inferential methods. Some of these methods involve dynamic modelling, with incorporation of thermal properties and using techniques familiar in computational fluid dynamics (CFD); a method of this class that has been used for the modelling of heat and mass transfer in one direction during baking is summarized, which may be extended to model transport of moisture within the product and also within the surrounding atmosphere. The concept of injecting heat during the baking process proportional to the calculated heat load on the oven has been implemented in a control scheme based on heat balance zone by zone through a continuous baking oven, taking advantage of the high latent heat of evaporation of water. Tests on biscuit production ovens are reported, with results that support a claim that the scheme gives more reproducible water distribution in the final product than conventional closed loop control of zone ambient temperatures, thus enabling water content to be held more closely within tolerance.

  4. Active vibration control testing of the SPICES program: final demonstration article

    Science.gov (United States)

    Dunne, James P.; Jacobs, Jack H.

    1996-05-01

    The Synthesis and Processing of Intelligent Cost Effective Structures (SPICES) Program is a partnership program sponsored by the Advanced Research Projects Agency. The mission of the program is to develop cost effective material processing and synthesis technologies to enable new products employing active vibration suppression and control devices to be brought to market. The two year program came to fruition in 1995 through the fabrication of the final smart components and testing of an active plate combined with two trapezoidal rails, forming an active mount. Testing of the SPICES combined active mount took place at McDonnell Douglas facilities in St. Louis, MO, in October-December 1995. Approximately 15 dB reduction in overall response of a motor mounted on the active structure was achieved. Further details and results of the SPICES combined active mount demonstration testing are outlined. Results of numerous damping and control strategies that were developed and employed in the testing are presented, as well as aspects of the design and fabrication of the SPICES active mount components.

  5. Geologic and hydrologic research at the Western New York Nuclear Service Center, West Valley, New York. Final report, August 1982-December 1983

    International Nuclear Information System (INIS)

    Albanese, J.R.; Anderson, S.L.; Fakundiny, R.H.; Potter, S.M.; Rogers, W.B.; Whitbeck, L.F.; LaFleur, R.G.; Boothroyd, J.C.; Timson, B.S.

    1984-06-01

    This report is the last in a series by the New York State Geological Survey on studies funded by the US Nuclear Regulatory Commission. The report covers five important aspects of the geology and hydrology of the Western New York Nuclear Service Center, near West Valley, New York: geomorphology, stratigraphy, sedimentology, surface water, and radionuclide analyses. We reviewed past research on these subjects and present new data obtained in the final phase of NYSGS research at the site. Also presented are up-to-date summaries of the present knowledge of geomorphology and stratigraphy. The report contains a significant bibliography of previous West Valley studies. Appendices include a report on the Fall 1983 Drilling Project and the procedures used, history and prognosis of Cattaraugus Creek and tributaries down cutting, and bar modification and landslide processes of Buttermilk Valley. 100 references, 7 figures, 7 tables

  6. Core elements of hospital antibiotic stewardship programs from the Centers for Disease Control and Prevention.

    Science.gov (United States)

    Pollack, Loria A; Srinivasan, Arjun

    2014-10-15

    The proven benefits of antibiotic stewardship programs (ASPs) for optimizing antibiotic use and minimizing adverse events, such as Clostridium difficile and antibiotic resistance, have prompted the Centers for Disease Control and Prevention (CDC) to recommend that all hospitals have an ASP. This article summarizes Core Elements of Hospital Antibiotic Stewardship Programs, a recently released CDC document focused on defining the infrastructure and practices of coordinated multidisciplinary programs to improve antibiotic use and patient care in US hospitals. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.

  7. Electric Power Research Institute Environmental Control Technology Center Report to the Steering Committee

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1998-01-12

    Operations and maintenance continued this month at the Electric Power Research Institute's (EPRI's) Environmental Control Technology Center (ECTC). Testing for the month involved the Dry Sorbent Injection (DSI) test block with the Carbon Injection System. The 1.0 MW Cold-Side Selective Catalytic Reduction (SCR) unit, the 0.4 MW Mini-Pilot Wet Scrubber, and the 4.0 MW Pilot Wet Scrubber remained idle this month in a cold-standby mode and were inspected regularly. These units remain available for testing as future project work is identified.

  8. Multi-Vehicle Cooperative Control Research at the NASA Armstrong Flight Research Center, 2000-2014

    Science.gov (United States)

    Hanson, Curt

    2014-01-01

    A brief introductory overview of multi-vehicle cooperative control research conducted at the NASA Armstrong Flight Research Center from 2000 - 2014. Both flight research projects and paper studies are included. Since 2000, AFRC has been almost continuously pursuing research in the areas of formation flight for drag reduction and automated cooperative trajectories. An overview of results is given, including flight experiments done on the FA-18 and with the C-17. Other multi-vehicle cooperative research is discussed, including small UAV swarming projects and automated aerial refueling.

  9. Quality Control Practices for Chemistry and Immunochemistry in a Cohort of 21 Large Academic Medical Centers.

    Science.gov (United States)

    Rosenbaum, Matthew W; Flood, James G; Melanson, Stacy E F; Baumann, Nikola A; Marzinke, Mark A; Rai, Alex J; Hayden, Joshua; Wu, Alan H B; Ladror, Megan; Lifshitz, Mark S; Scott, Mitchell G; Peck-Palmer, Octavia M; Bowen, Raffick; Babic, Nikolina; Sobhani, Kimia; Giacherio, Donald; Bocsi, Gregary T; Herman, Daniel S; Wang, Ping; Toffaletti, John; Handel, Elizabeth; Kelly, Kathleen A; Albeiroti, Sami; Wang, Sihe; Zimmer, Melissa; Driver, Brandon; Yi, Xin; Wilburn, Clayton; Lewandrowski, Kent B

    2018-05-29

    In the United States, minimum standards for quality control (QC) are specified in federal law under the Clinical Laboratory Improvement Amendment and its revisions. Beyond meeting this required standard, laboratories have flexibility to determine their overall QC program. We surveyed chemistry and immunochemistry QC procedures at 21 clinical laboratories within leading academic medical centers to assess if standardized QC practices exist for chemistry and immunochemistry testing. We observed significant variation and unexpected similarities in practice across laboratories, including QC frequency, cutoffs, number of levels analyzed, and other features. This variation in practice indicates an opportunity exists to establish an evidence-based approach to QC that can be generalized across institutions.

  10. High-fat diets and seizure control in myoclonic-astatic epilepsy: a single center's experience.

    Science.gov (United States)

    Simard-Tremblay, Elisabeth; Berry, Patricia; Owens, Aaron; Cook, William Byron; Sittner, Haley R; Mazzanti, Marta; Huber, Jennifer; Warner, Molly; Shurtleff, Hillary; Saneto, Russell P

    2015-02-01

    To determine the efficacy of the Modified Atkins Diet (MAD) and Ketogenic Diet (KD) in seizure control within a population of myoclonic-astatic epilepsy (MAE) patients. This was a retrospective, single center study evaluating the seizure control by high fat diets. Seizure diaries kept by the parents performed seizure counts. All patients met the clinical criteria for MAE. Nine patients met the clinical criteria. We found that both the MAD and KD were efficacious in complete seizure control and allowed other medications to be stopped in seven patients. Two patients had greater than 90% seizure control without medications, one on the KD and the other on the MAD. Seizure freedom has ranged from 13 to 36 months, and during this time four patients have been fully weaned off of diet management. One patient was found to have a mutation in SLC2A1. Our results suggest that strictly defined MAE patients respond to the MAD with prolonged seizure control. Some patients may require the KD for seizure freedom, suggesting a common pathway of increased requirement for fats. Once controlled, those fully responsive to the Diet(s) could be weaned off traditional seizure medications and in many, subsequently off the MAD or KD. Copyright © 2014 British Epilepsy Association. Published by Elsevier Ltd. All rights reserved.

  11. Using Web 2.0 (and Beyond?) in Space Flight Operations Control Centers

    Science.gov (United States)

    Scott, David W.

    2010-01-01

    Word processing was one of the earliest uses for small workstations, but we quickly learned that desktop computers were far more than e-typewriters. Similarly, "Web 2.0" capabilities, particularly advanced search engines, chats, wikis, blogs, social networking, and the like, offer tools that could significantly improve our efficiency at managing the avalanche of information and decisions needed to operate space vehicles in realtime. However, could does not necessarily equal should. We must wield two-edged swords carefully to avoid stabbing ourselves. This paper examines some Web 2.0 tools, with an emphasis on social media, and suggests which ones might be useful or harmful in real-time space operations co rnotl environments, based on the author s experience as a Payload Crew Communicator (PAYCOM) at Marshall Space Flight Center s (MSFC) Payload Operations Integration Center (POIC) for the International Space Station (ISS) and on discussions with other space flight operations control organizations and centers. There is also some discussion of an offering or two that may come from beyond the current cyber-horizon.

  12. IEEE Std 649-1991: IEEE standard for qualifying Class 1E motor control centers for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applications in nuclear power generating stations are described. In addition to defining specific qualification requirements for Class 1E motor control centers and their components in accordance with the more general qualification requirements of IEEE Std 323-1983, this standard is intended to provide guidance in establishing a qualification program for demonstrating the adequacy of Class 1E motor control centers in nuclear power generating station applications

  13. The ORNL Controlled Fusion Atomic Data Center: Overview of Activities 2011

    International Nuclear Information System (INIS)

    Schultz, D.R.

    2011-01-01

    The Controlled Fusion Atomic Data Center (CFADC) of the Oak Ridge National Laboratory continued operation aimed at collecting, evaluating, and disseminating atomic, molecular, and particle-surface interaction (AM and PSI) data needed by both the U.S. and international plasma science communities. This work has been carried out within an overarching atomic physics research group which produces much of the required data through an active experimental and theoretical science program. The production of an annotated bibliography of AM and PSI literature relevant to plasma science continues to be among the most important activities of the data center, forming the basis for the CFADC on-line bibliographic search engine and a significant part of the IAEA A+M Data Unit's 'International Bulletin on Atomic and Molecular Data for Fusion.' Also chief among the data center's activities are responses to specific data requests from the plasma science community, leading to either rapid feedback using existing data resources or long term data production projects, as well as participation in IAEA Coordinated Research Programs including recently 'Data for Surface Composition Dynamics Relevant to Erosion Processes' and 'Atomic and Molecular Data for Plasma Modeling.' Highlights of recent data production projects include the following: Experimental and theoretical data for inelastic electron-hydrocarbon reactions, large scale computational results for particle reflection from surfaces, measurements of chemical sputtering from carbon, inaugural experiments considering molecular ion collisions with neutral hydrogen, and expansion of the database of elastic and related transport cross sections calculated for intrinsic and extrinsic impurities in hydrogen plasmas. Progress is being hampered owing to news from the US Department of Energy that it plans to close out the program after a ramp down of funding in 2012, following a distinguished 52 year history of contributions to the US and

  14. FY98 Final Report Initial Interfacial Chemical Control for Enhancement of Composite Material Strength; TOPICAL

    International Nuclear Information System (INIS)

    GE Fryxell; KL Alford; KL Simmons; RD Voise; WD Samuels

    1999-01-01

    The U.S. Army Armament Research Development and Engineering Center (ARDEC) sponsored this research project to support the development of new self-assembled monolayer fiber coatings. These coatings can greatly increase the bond strength between the fiber and the resin matrix of a composite material. Composite ammunition components molded from such materials will exhibit higher strength than current materials, and will provide a major improvement in the performance of composites in military applications. Use of composite materials in military applications is desirable because of the lighter weight of the materials and their high strengths. The FY97 project investigated initial interfacial chemical control for enhancement of composite material strength. The core of the project was to modify the covalent interface of glass fibers (or other reinforcing fibers) to induce strong, uniform, defect-free adhesion between the fibers' surfaces and the polymer matrix. Installing a self-assembled monolayer tailored to the specific matrix resin accomplished this. Simply, the self-assembled monolayer modifies the fiber to make it appear to have the same chemical composition as the resin matrix. The self-assembled monolayer creates a receptive, hydrophobic interface that the thermoset resin (or polymer precursors) would wet more effectively, leading to a higher contact surface area and more efficient adhesion. The FY97 work phase demonstrated that it is possible to increase the adhesive strength, as well as increase the heat deflection temperature through the use of self-assembled monolayer

  15. US Centers for Disease Control and Prevention and Its Partners' Contributions to Global Health Security.

    Science.gov (United States)

    Tappero, Jordan W; Cassell, Cynthia H; Bunnell, Rebecca E; Angulo, Frederick J; Craig, Allen; Pesik, Nicki; Dahl, Benjamin A; Ijaz, Kashef; Jafari, Hamid; Martin, Rebecca

    2017-12-01

    To achieve compliance with the revised World Health Organization International Health Regulations (IHR 2005), countries must be able to rapidly prevent, detect, and respond to public health threats. Most nations, however, remain unprepared to manage and control complex health emergencies, whether due to natural disasters, emerging infectious disease outbreaks, or the inadvertent or intentional release of highly pathogenic organisms. The US Centers for Disease Control and Prevention (CDC) works with countries and partners to build and strengthen global health security preparedness so they can quickly respond to public health crises. This report highlights selected CDC global health protection platform accomplishments that help mitigate global health threats and build core, cross-cutting capacity to identify and contain disease outbreaks at their source. CDC contributions support country efforts to achieve IHR 2005 compliance, contribute to the international framework for countering infectious disease crises, and enhance health security for Americans and populations around the world.

  16. Germinal Center Optimization Applied to Neural Inverse Optimal Control for an All-Terrain Tracked Robot

    Directory of Open Access Journals (Sweden)

    Carlos Villaseñor

    2017-12-01

    Full Text Available Nowadays, there are several meta-heuristics algorithms which offer solutions for multi-variate optimization problems. These algorithms use a population of candidate solutions which explore the search space, where the leadership plays a big role in the exploration-exploitation equilibrium. In this work, we propose to use a Germinal Center Optimization algorithm (GCO which implements temporal leadership through modeling a non-uniform competitive-based distribution for particle selection. GCO is used to find an optimal set of parameters for a neural inverse optimal control applied to all-terrain tracked robot. In the Neural Inverse Optimal Control (NIOC scheme, a neural identifier, based on Recurrent High Orden Neural Network (RHONN trained with an extended kalman filter algorithm, is used to obtain a model of the system, then, a control law is design using such model with the inverse optimal control approach. The RHONN identifier is developed without knowledge of the plant model or its parameters, on the other hand, the inverse optimal control is designed for tracking velocity references. Applicability of the proposed scheme is illustrated using simulations results as well as real-time experimental results with an all-terrain tracked robot.

  17. Trends in Teenagers' Nonopiod Substance Exposures Reported to Poison Control Centers, 2010-2015.

    Science.gov (United States)

    Wright, Brad; Mestan, Samantha; Ahrens, Monica; Bottei, Edward

    2018-05-01

    To describe current trends in nonopioid substance exposures and associated outcomes among teenagers nationwide. In this cross-sectional study, we used 2010-2015 data from the American Association of Poison Control Centers' National Poison Data System and Poisson tests to document trends in the rate of calls to poison control centers involving adolescents stratified by sex, exposures by substance category, proportion of intentional exposures, and severity of exposures. The number of calls per 1000 persons increased from 5.7 to 6.8 for teenage girls and decreased from 4.7 to 4.3 for boys. Reported exposures to prescription and over-the-counter medications and illicit street drugs increased between 24% and 73%, and reported opioid exposures decreased by 16%. Among teenage girls, intentional exposures increased from 57% to 68%, with cases increasingly managed in health care facilities and more likely to result in worse health outcomes. The increase in intentional nonopioid substance exposures among teenage girls, with serious and potentially life-threatening consequences, is a matter of serious concern. Similar trends were not observed among teenage boys. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. FAA Alleged Waste and Mismanagement of Air Route Traffic Control Centers Critical and Essential Power Systems Project

    Science.gov (United States)

    1996-10-16

    The Office of Inspector General (OIG) reviewed a complaint from Congressman Deal on behalf of a constituent. The constituent alleged waste and mismanagement occurred in the Federal Aviation Administration (FAA) Air Route Traffic Control Centers Criti...

  19. Experimental and Computational Instrumentation for Rotorcraft Noise and Vibration Control Research at the Penn State Rotorcraft Center

    National Research Council Canada - National Science Library

    Smith, Edward

    2001-01-01

    A team of faculty at the Penn State Rotorcraft Center of Excellence has integrated five new facilities into a broad range of research and educational programs focused on rotorcraft noise and vibration control...

  20. IEEE Std 649-1980: IEEE standard for qualifying Class 1E motor control centers for nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This standard describes the basic principles, requirements, and methods for qualifying Class 1E motor control centers for outside containment applications in nuclear power generating stations. Qualification of motor control centers located inside containment in a nuclear power generating station is beyond the scope of this standard. The purpose of this standard is (1) to define specific qualification requirements for Class 1E motor control centers in accordance with the more general qualification requirements of IEEE Std 323-1974, IEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations; (2) to provide guidance in establishing a qualification program for demonstrating the design adequacy of Class 1E motor control centers in nuclear power generating station applications

  1. Integration and control of wind farms in the Danish electricity system. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bak-Jensen, B. (ed.); Suwannarat, A.; Chen, Z. (Aalborg Univ.. Dept. of Energy Technology, Aalborg (Denmark)) (and others)

    2009-07-01

    due to too high wind speed. First simulations, where only the central power plants and the decentralized combined heat and power plants participate in the balancing is performed, then the simulations are extended with the usage of the Great Belt Link and the links to Norway and Sweden, and finally also the usage of delta control in the wind farm and the ability to include planned power for the power plants is used. .From these simulations one can see the importance of using planned power, different control methods for the wind farms and being able to use the connections to our neighboring countries. It is found that this is decisive for the balancing situation in Denmark, and for the possibility to cope with large wind power penetration in the future. (LN)

  2. Laser polarization dependent and magnetically control of group velocity in a dielectric medium doped with nanodiamond nitrogen vacancy centers

    Energy Technology Data Exchange (ETDEWEB)

    Asadpour, Seyyed Hossein; Rahimpour Soleimani, H., E-mail: Rahimpour@guilan.ac.ir

    2014-03-01

    In this paper, group velocity control of Gaussian beam in a dielectric medium doped with nanodiamond nitrogen vacancy (NV) centers under optical excitation is discussed. The shape of transmitted and reflected pulses from dielectric can be tuned by changing the intensity of magnetic field and polarization of the control beam. The effect of intensity of control beam on group velocity is also investigated.

  3. Development and evaluation of a multidisciplinary controlled substances committee within a patient-centered medical home.

    Science.gov (United States)

    Gernant, Stephanie A; Bastien, Rachel; Lai, Andrea

    2015-01-01

    To present the development of a multidisciplinary controlled substances committee and describe its effectiveness in relation to prescribers' acceptance of committee recommendations, the number of premature deaths associated with controlled substances, and prescribers' need for education on controlled substances. A patient-centered medical home and accountable care organization in Maine that serves more than 60,000 patients across a large rural area, 70% of whom are classified as lower income. A multidisciplinary group of prescribers and PharmD residents created a committee to influence organizational culture regarding controlled substances. The Controlled Substances Initiative Committee (CSIC) updated institutional policies, developed provider education, and made personalized patient recommendations to prescribers. The primary outcome was average change in daily morphine equivalent dose (MED) in patients for whom CSIC recommended a dose reduction to the patient's prescriber. Secondary outcomes included the proportion of patients who died of a known overdose or suspected drug-related death during 2012-2013 or 2013-2014. In addition, prescriber beliefs about controlled substances were measured via a needs assessment. The average daily MED for patients whom CSIC recommended dose reduction was lower after 3 months compared with at baseline (175.5 ± 344.3 mg vs. 292.7 ± 466.5 mg; P vs. 11.1%; P = 1.00). However, a greater number of patients had a suspected drug-related death during 2013-2014 compared with during 2012-2013 (0% vs. 27.3%; P = 0.05). A multidisciplinary controlled substances committee may improve patient safety and outcomes by offering prescriber support and helping alter prescribing culture.

  4. An adaptive noise cancelling system used for beam control at the Stanford Linear Accelerator Center

    International Nuclear Information System (INIS)

    Himel, T.; Allison, S.; Grossberg, P.; Hendrickson, L.; Sass, R.; Shoaee, H.

    1993-06-01

    The SLAC Linear Collider now has a total of twenty-four beam-steering feedback loops used to keep the electron and positron beams on their desired trajectories. Seven of these loops measure and control the same beam as it proceeds down the linac through the arcs to the final focus. Ideally by each loop should correct only for disturbances that occur between it and the immediate upstream loop. In fact, in the original system each loop corrected for all upstream disturbances. This resulted in undesirable over-correction and ringing. We added MIMO (Multiple Input Multiple Output) adaptive noise cancellers to separate the signal we wish to correct from disturbances further upstream. This adaptive control improved performance in the 1992 run

  5. ASTEC and MODEL: Controls software development at Goddard Space Flight Center

    Science.gov (United States)

    Downing, John P.; Bauer, Frank H.; Surber, Jeffrey L.

    1993-01-01

    The ASTEC (Analysis and Simulation Tools for Engineering Controls) software is under development at the Goddard Space Flight Center (GSFC). The design goal is to provide a wide selection of controls analysis tools at the personal computer level, as well as the capability to upload compute-intensive jobs to a mainframe or supercomputer. In the last three years the ASTEC (Analysis and Simulation Tools for Engineering Controls) software has been under development. ASTEC is meant to be an integrated collection of controls analysis tools for use at the desktop level. MODEL (Multi-Optimal Differential Equation Language) is a translator that converts programs written in the MODEL language to FORTRAN. An upgraded version of the MODEL program will be merged into ASTEC. MODEL has not been modified since 1981 and has not kept with changes in computers or user interface techniques. This paper describes the changes made to MODEL in order to make it useful in the 90's and how it relates to ASTEC.

  6. Classification of two steroids, prostanozol and methasterone, as Schedule III anabolic steroids under the Controlled Substance Act. Final rule.

    Science.gov (United States)

    2012-07-30

    With the issuance of this Final Rule, the Administrator of the DEA classifies the following two steroids as "anabolic steroids'' under the Controlled Substances Act (CSA): prostanozol (17[beta]-hydroxy-5[alpha]-androstano[3,2-c]pyrazole) and methasterone (2[alpha],17[alpha]-dimethyl-5[alpha]-androstan-17[beta]-ol-3-one). These steroids and their salts, esters, and ethers are Schedule III controlled substances subject to the regulatory control provisions of the CSA.

  7. SisterTalk: final results of a culturally tailored cable television delivered weight control program for Black women

    OpenAIRE

    Risica, Patricia Markham; Gans, Kim M; Kumanyika, Shiriki; Kirtania, Usree; Lasater, Thomas M

    2013-01-01

    Background Obesity among Black women continues to exceed that of other women. Most weight loss programs created without reference to specific cultural contexts are less effective for Black than White women. Weight control approaches accessible to Black women and adapted to relevant cultural contexts are important for addressing this problem. This paper reports the final results of SisterTalk, the randomized controlled trial of a cable TV weight control program oriented toward Black women. Met...

  8. Plasma Science and Innovation Center at Washington, Wisconsin, and Utah State: Final Scientific Report for the University of Wisconsin-Madison

    Energy Technology Data Exchange (ETDEWEB)

    Sovinec, Carl R. [Univ. of Wisconsin, Madison, WI (United States)

    2016-11-28

    The University of Wisconsin-Madison component of the Plasma Science and Innovation Center (PSI Center) contributed to modeling capabilities and algorithmic efficiency of the Non-Ideal Magnetohydrodynamics with Rotation (NIMROD) Code, which is widely used to model macroscopic dynamics of magnetically confined plasma. It also contributed to the understanding of direct-current (DC) injection of electrical current for initiating and sustaining plasma in three spherical torus experiments: the Helicity Injected Torus-II (HIT-II), the Pegasus Toroidal Experiment, and the National Spherical Torus Experiment (NSTX). The effort was funded through the PSI Center's cooperative agreement with the University of Washington and Utah State University over the period of March 1, 2005 - August 31, 2016. In addition to the computational and physics accomplishments, the Wisconsin effort contributed to the professional education of four graduate students and two postdoctoral research associates. The modeling for HIT-II and Pegasus was directly supported by the cooperative agreement, and contributions to the NSTX modeling were in support of work by Dr. Bickford Hooper, who was funded through a separate grant. Our primary contribution to model development is the implementation of detailed closure relations for collisional plasma. Postdoctoral associate Adam Bayliss implemented the temperature-dependent effects of Braginskii's parallel collisional ion viscosity. As a graduate student, John O'Bryan added runtime options for Braginskii's models and Ji's K2 models of thermal conduction with magnetization effects and thermal equilibration. As a postdoctoral associate, O'Bryan added the magnetization effects for ion viscosity. Another area of model development completed through the PSI-Center is the implementation of Chodura's phenomenological resistivity model. Finally, we investigated and tested linear electron parallel viscosity, leveraged by support from

  9. The effects of practice on movement distance and final position reproduction: implications for the equilibrium-point control of movements.

    Science.gov (United States)

    Jaric, S; Corcos, D M; Gottlieb, G L; Ilic, D B; Latash, M L

    1994-01-01

    Predictions of two views on single-joint motor control, namely programming of muscle force patterns and equilibrium-point control, were compared with the results of experiments with reproduction of movement distance and final location during fast unidirectional elbow flexions. Two groups of subjects were tested. The first group practiced movements over a fixed distance (36 degrees), starting from seven different initial positions (distance group, DG). The second group practiced movements from the same seven initial positions to a fixed final location (location group, LG). Later, all the subjects were tested at the practiced task with their eyes closed, and then, unexpectedly for the subjects, they were tested at the other, unpracticed task. In both groups, the task to reproduce final position had lower indices of final position variability than the task to reproduce movement distance. Analysis of the linear regression lines between initial position and final position (or movement distance) also demonstrated a better (more accurate) performance during final position reproduction than during distance reproduction. The data are in a good correspondence with the predictions of the equilibrium-point hypothesis, but not with the predictions of the force-pattern control approach.

  10. Enhanced control and sensing for the REMOTEC ANDROS Mk VI robot. CRADA final report

    International Nuclear Information System (INIS)

    Spelt, P.F.; Harvey, H.W.

    1998-01-01

    This Cooperative Research and Development Agreement (CRADA) between Lockheed Martin Energy Systems, Inc., and REMOTEC, Inc., explored methods of providing operator feedback for various work actions of the ANDROS Mk VI teleoperated robot. In a hazardous environment, an extremely heavy workload seriously degrades the productivity of teleoperated robot operators. This CRADA involved the addition of computer power to the robot along with a variety of sensors and encoders to provide information about the robot's performance in and relationship to its environment. Software was developed to integrate the sensor and encoder information and provide control input to the robot. ANDROS Mk VI robots are presently used by numerous electric utilities to perform tasks in reactors where substantial exposure to radiation exists, as well as in a variety of other hazardous environments. Further, this platform has potential for use in a number of environmental restoration tasks, such as site survey and detection of hazardous waste materials. The addition of sensors and encoders serves to make the robot easier to manage and permits tasks to be done more safely and inexpensively (due to time saved in the completion of complex remote tasks). Prior research on the automation of mobile platforms with manipulators at Oak Ridge National Laboratory's Center for Engineering Systems Advanced Research (CESAR, B ampersand R code KC0401030) Laboratory, a BES-supported facility, indicated that this type of enhancement is effective. This CRADA provided such enhancements to a successful working teleoperated robot for the first time. Performance of this CRADA used the CESAR laboratory facilities and expertise developed under BES funding

  11. Poison control centers in developing countries and Asia's need for toxicology education

    International Nuclear Information System (INIS)

    Makalinao, Irma R.; Awang, Rahmat

    2005-01-01

    Poison control centers (PCCs) in developing countries have been set up in response to the challenge of decreasing mortality and morbidity from poisoning. The services range from poison information to actual clinical treatment mostly of acute cases. Lately, PCCs have expanded from their traditional role to one that actively engages in community health studies, toxicovigilance along with treatment of chronic poisoning. Recognizing that types of poisoning and specific needs may vary from country to country, toxicology education that addresses these unique regional issues has become more necessary. Toxicology education, both formal and informal, exists in various stages of development in Asia. Clearly, there are gaps that need to be addressed especially in areas where there are no poison centers or where strengthening is necessary. Collaboration between PCCs in developing countries can help augment available resources including human, analytical and technical expertise. The critical mass of trained toxicologists will fill in the demand for clinical and regulatory specialists and educators as well. This paper highlights the experiences and resources available to the Philippine and Malaysian poison centers and the strengths generated by networking and collaboration. The role of Asia Pacific Association of Medical Toxicology (APAMT) as the Science NGO representative to the Intergovernmental Forum on Chemical Safety (IFCS) forum standing committee in promoting chemical safety at the regional level will be discussed. The 'Clearinghouse on the Sound Management of Chemicals', a platform for engaging multi-stakeholder and interdisciplinary partnerships, will be described as a possible model for capacity building to advance chemical safety through education and training not only in developing countries in Asia but globally as well

  12. Electronic Cigarette Exposure: Calls to Wisconsin Poison Control Centers, 2010–2015.

    Science.gov (United States)

    Weiss, Debora; Tomasallo, Carrie D; Meiman, Jon G; Creswell, Paul D; Melstrom, Paul C; Gummin, David D; Patel, Disa J; Michaud, Nancy T; Sebero, Heather A; Anderson, Henry A

    2016-12-01

    E-cigarettes are battery-powered devices that deliver nicotine and flavorings by aerosol and have been marketed in the United States since 2007. Because e-cigarettes have increased in popularity, toxicity potential from device misuse and malfunction also has increased. National data indicate that during 2010–2014, exposure calls to US poison control centers increased only 0.3% for conventional cigarette exposures, whereas calls increased 41.7% for e-cigarette exposures. We characterized cigarette and e-cigarette exposure calls to the Wisconsin Poison Center January 1, 2010 through October 10, 2015. We compared cigarette and e-cigarette exposure calls by exposure year, demographic characteristics, caller site, exposure site, exposure route, exposure reason, medical outcome, management site, and level of care at a health care facility. During January 2010 to October 2015, a total of 98 e-cigarette exposure calls were reported, and annual exposure calls increased approximately 17-fold, from 2 to 35. During the same period, 671 single-exposure cigarette calls with stable annual call volumes were reported. E-cigarette exposure calls were associated with children aged ≤5 years (57/98, 58.2%) and adults aged ≥20 years (30/98, 30.6%). Cigarette exposure calls predominated among children aged ≤5 years (643/671, 95.8%). The frequency of e-cigarette exposure calls to the Wisconsin Poison Center has increased and is highest among children aged ≤5 years and adults. Strategies are warranted to prevent future poisonings from these devices, including nicotine warning labels and public advisories to keep e-cigarettes away from children.

  13. The Final Count Down: A Review of Three Decades of Flight Controller Training Methods for Space Shuttle Mission Operations

    Science.gov (United States)

    Dittermore, Gary; Bertels, Christie

    2011-01-01

    Operations of human spaceflight systems is extremely complex; therefore, the training and certification of operations personnel is a critical piece of ensuring mission success. Mission Control Center (MCC-H), at the Lyndon B. Johnson Space Center in Houston, Texas, manages mission operations for the Space Shuttle Program, including the training and certification of the astronauts and flight control teams. An overview of a flight control team s makeup and responsibilities during a flight, and details on how those teams are trained and certified, reveals that while the training methodology for developing flight controllers has evolved significantly over the last thirty years the core goals and competencies have remained the same. In addition, the facilities and tools used in the control center have evolved. Changes in methodology and tools have been driven by many factors, including lessons learned, technology, shuttle accidents, shifts in risk posture, and generational differences. Flight controllers share their experiences in training and operating the space shuttle. The primary training method throughout the program has been mission simulations of the orbit, ascent, and entry phases, to truly train like you fly. A review of lessons learned from flight controller training suggests how they could be applied to future human spaceflight endeavors, including missions to the moon or to Mars. The lessons learned from operating the space shuttle for over thirty years will help the space industry build the next human transport space vehicle.

  14. Quality Control Algorithms for the Kennedy Space Center 50-Megahertz Doppler Radar Wind Profiler Winds Database

    Science.gov (United States)

    Barbre, Robert E., Jr.

    2012-01-01

    This paper presents the process used by the Marshall Space Flight Center Natural Environments Branch (EV44) to quality control (QC) data from the Kennedy Space Center's 50-MHz Doppler Radar Wind Profiler for use in vehicle wind loads and steering commands. The database has been built to mitigate limitations of using the currently archived databases from weather balloons. The DRWP database contains wind measurements from approximately 2.7-18.6 km altitude at roughly five minute intervals for the August 1997 to December 2009 period of record, and the extensive QC process was designed to remove spurious data from various forms of atmospheric and non-atmospheric artifacts. The QC process is largely based on DRWP literature, but two new algorithms have been developed to remove data contaminated by convection and excessive first guess propagations from the Median Filter First Guess Algorithm. In addition to describing the automated and manual QC process in detail, this paper describes the extent of the data retained. Roughly 58% of all possible wind observations exist in the database, with approximately 100 times as many complete profile sets existing relative to the EV44 balloon databases. This increased sample of near-continuous wind profile measurements may help increase launch availability by reducing the uncertainty of wind changes during launch countdown

  15. Adaptation of Control Center Software to Commerical Real-Time Display Applications

    Science.gov (United States)

    Collier, Mark D.

    1994-01-01

    NASA-Marshall Space Flight Center (MSFC) is currently developing an enhanced Huntsville Operation Support Center (HOSC) system designed to support multiple spacecraft missions. The Enhanced HOSC is based upon a distributed computing architecture using graphic workstation hardware and industry standard software including POSIX, X Windows, Motif, TCP/IP, and ANSI C. Southwest Research Institute (SwRI) is currently developing a prototype of the Display Services application for this system. Display Services provides the capability to generate and operate real-time data-driven graphic displays. This prototype is a highly functional application designed to allow system end users to easily generate complex data-driven displays. The prototype is easy to use, flexible, highly functional, and portable. Although this prototype is being developed for NASA-MSFC, the general-purpose real-time display capability can be reused in similar mission and process control environments. This includes any environment depending heavily upon real-time data acquisition and display. Reuse of the prototype will be a straight-forward transition because the prototype is portable, is designed to add new display types easily, has a user interface which is separated from the application code, and is very independent of the specifics of NASA-MSFC's system. Reuse of this prototype in other environments is a excellent alternative to creation of a new custom application, or for environments with a large number of users, to purchasing a COTS package.

  16. Antivenom Therapy for Crotaline Snakebites: Has the Poison Control Center Provided Effective Guidelines?

    Directory of Open Access Journals (Sweden)

    Yen-Chia Chen

    2007-12-01

    Full Text Available Crotaline snakebites (Protobothrops mucrosquamatus and Trimeresurus stejnegeri are a common medical emergency in Taiwan that can be effectively treated by a bivalent F(ab'2 antivenom. We investigated the differences in the clinical outcomes of patients who received different therapeutic regimens of antivenom in a medical center where clinical toxicologists followed the poison control center (PCC guidelines (medical group and surgeons did not (surgical group. The medical records of inpatients with crotaline snakebites between 1991 and 2005 were reviewed and information on demographics, treatments, adverse effects of antivenom, and complications was abstracted and analyzed. A total of 179 patients (90 medical, 89 surgical were eligible for study. There was no significant intergroup difference in baseline characteristics except that the dose of antivenom and the probability of antibiotic use were both higher in the surgical group (5.9 ± 4.2 vials vs. 2.7 ± 1.6 vials; 93% vs. 60%. Multiple logistic regression adjusting for age, gender, calendar year of envenomation, severity of envenomation, and antibiotic use did not disclose evidence of any difference in various clinical outcomes between medical and surgical patients. The lower dose of antivenom recommended by the PCC may be as effective and safe as the higher dose used in the surgical group for the treatment of crotaline snakebites.

  17. Automated daily quality control analysis for mammography in a multi-unit imaging center.

    Science.gov (United States)

    Sundell, Veli-Matti; Mäkelä, Teemu; Meaney, Alexander; Kaasalainen, Touko; Savolainen, Sauli

    2018-01-01

    Background The high requirements for mammography image quality necessitate a systematic quality assurance process. Digital imaging allows automation of the image quality analysis, which can potentially improve repeatability and objectivity compared to a visual evaluation made by the users. Purpose To develop an automatic image quality analysis software for daily mammography quality control in a multi-unit imaging center. Material and Methods An automated image quality analysis software using the discrete wavelet transform and multiresolution analysis was developed for the American College of Radiology accreditation phantom. The software was validated by analyzing 60 randomly selected phantom images from six mammography systems and 20 phantom images with different dose levels from one mammography system. The results were compared to a visual analysis made by four reviewers. Additionally, long-term image quality trends of a full-field digital mammography system and a computed radiography mammography system were investigated. Results The automated software produced feature detection levels comparable to visual analysis. The agreement was good in the case of fibers, while the software detected somewhat more microcalcifications and characteristic masses. Long-term follow-up via a quality assurance web portal demonstrated the feasibility of using the software for monitoring the performance of mammography systems in a multi-unit imaging center. Conclusion Automated image quality analysis enables monitoring the performance of digital mammography systems in an efficient, centralized manner.

  18. plasmatis Center for Innovation Competence: Controlling reactive component output of atmospheric pressure plasmas in plasma medicine

    Science.gov (United States)

    Reuter, Stephan

    2012-10-01

    The novel approach of using plasmas in order to alter the local chemistry of cells and cell environment presents a significant development in biomedical applications. The plasmatis center for innovation competence at the INP Greifswald e.V. performs fundamental research in plasma medicine in two interdisciplinary research groups. The aim of our plasma physics research group ``Extracellular Effects'' is (a) quantitative space and time resolved diagnostics and modelling of plasmas and liquids to determine distribution and composition of reactive species (b) to control the plasma and apply differing plasma source concepts in order to produce a tailored output of reactive components and design the chemical composition of the liquids/cellular environment and (c) to identify and understand the interaction mechanisms of plasmas with liquids and biological systems. Methods to characterize the plasma generated reactive species from plasma-, gas- and liquid phase and their biological effects will be presented. The diagnostic spectrum ranges from absorption/emission/laser spectroscopy and molecular beam mass spectrometry to electron paramagnetic resonance spectroscopy and cell biological diagnostic techniques. Concluding, a presentation will be given of the comprehensive approach to plasma medicine in Greifswald where the applied and clinical research of the Campus PlasmaMed association is combined with the fundamental research at plasmatis center.

  19. Independent sailing with high tetraplegia using sip and puff controls: integration into a community sailing center.

    Science.gov (United States)

    Rojhani, Solomon; Stiens, Steven A; Recio, Albert C

    2017-07-01

    We are continually rediscovering how adapted recreational activity complements the rehabilitation process, enriches patients' lives and positively impacts outcome measures. Although sports for people with spinal cord injuries (SCI) has achieved spectacular visibility, participation by high cervical injuries is often restricted due to poor accessibility, safety concerns, lack of adaptability, and high costs of technology. We endeavor to demonstrate the mechanisms, adaptability, accessibility, and benefits the sport of sailing creates in the rehabilitative process. Our sailor is a 27-year-old man with a history of traumatic SCI resulting in C4 complete tetraplegia. The participant completed an adapted introductory sailing course, and instruction on the sip-and-puff sail and tiller control mechanism. With practice, he navigated an on-water course in moderate winds of 5 to 15 knots. Despite trends toward shorter rehabilitation stays, aggressive transdisciplinary collaboration with recreation therapy can provide community and natural environment experiences while inpatient and continuing post discharge. Such peak physical and psychological experiences provide a positive perspective for the future that can be shared on the inpatient unit, with families and support systems like sailing clubs in the community. Rehabilitation theory directs a team process to achieve patient self-awareness and initiate self-actualization in spite of disablement. Utilization of local community sailing centers that have provided accessible assisted options provides person-centered self-realization of goals as assisted by family and natural supports. Such successful patients become native guides for others seeking the same experience.

  20. BNL ALARA Center experience with an information exchange system on dose control at nuclear power plants

    International Nuclear Information System (INIS)

    Baum, J.W.; Khan, T.A.

    1992-01-01

    The essential elements of an international information exchange system on dose control at nuclear power plants are summarized. Information was collected from literature abstracting services, by attending technical meetings, by circulating data collection forms, and through personal contacts. Data are assembled in various databases and periodically disseminated to several hundred interested participants through a variety of publications and at technical meetings. Immediate on-line access to the data is available to participants with modems, commercially available communications software, and a password that is provided by the Brookhaven National Laboratory (BNL) ALARA Center to authorized users of the system. Since January 1992, rapid access also has been provided to persons with fax machines. Some information is available for ''polling'' the BNL system at any time, and other data can be installed for polling on request. Most information disseminated to data has been through publications; however, new protocols, simplified by the ALARA Center staff, and the convenience of fax machines are likely to make the earlier availability of information through these mechanisms increasingly important

  1. ENHANCED CONTROL OF MERCURY BY WET FLUE GAS DESULFURIZATION SYSTEMS; FINAL

    International Nuclear Information System (INIS)

    Unknown

    2001-01-01

    The U.S. Department of Energy and EPRI co-funded this project to improve the control of mercury emissions from coal-fired power plants equipped with wet flue gas desulfurization (FGD) systems. The project has investigated catalytic oxidation of vapor-phase elemental mercury to a form that is more effectively captured in wet FGD systems. If successfully developed, the process could be applicable to over 90,000 MW of utility generating capacity with existing FGD systems, and to future FGD installations. Field tests were conducted to determine whether candidate catalyst materials remain active towards mercury oxidation after extended flue gas exposure. Catalyst life will have a large impact on the cost effectiveness of this potential process. A mobile catalyst test unit was used to test the activity of four different catalyst materials for a period of up to six months each at three utility sites. Catalyst testing was completed at the first site, which fires Texas lignite, in December 1998; at the second test site, which fires a Powder River Basin subbituminous coal, in November 1999; and at the third site, which fires a medium- to high-sulfur bituminous coal, in January 2001. Results of testing at each of the three sites were reported in previous technical notes. At Site 1, catalysts were tested only as powders dispersed in sand bed reactors. At Sites 2 and 3, catalysts were tested in two forms, including powders dispersed in sand and in commercially available forms such as extruded pellets and coated honeycomb structures. This final report summarizes and presents results from all three sites, for the various catalyst forms tested. Field testing was supported by laboratory tests to screen catalysts for activity at specific flue gas compositions, to investigate catalyst deactivation mechanisms and methods for regenerating spent catalysts. Laboratory results are also summarized and discussed in this report

  2. Operator-centered control of a semi-autonomous industrial robot

    International Nuclear Information System (INIS)

    Spelt, P.F.; Jones, S.L.

    1994-01-01

    This paper presents work done by Oak Ridge National Laboratory and Remotec, Inc., to develop a new operator-centered control system for Remotec's Andros telerobot. Andros robots are presently used by numerous electric utilities, the armed forces, and numerous law enforcement agencies to perform tasks which are hazardous for human operators. This project has automated task components and enhanced the video graphics display of the robot's position in the environment to significantly reduce operator workload. The procedure of automating a telerobot requires the addition of computer power to the robot, along with a variety of sensors and encoders to provide information about the robots performance in and relationship to its environment The resulting vehicle serves as a platform for research on strategies to integrate automated tasks with those performed by a human operator. The addition of these capabilities will greatly enhance the safety and efficiency of performance in hazardous environments

  3. Examining the role of gender in career advancement at the Centers for Disease Control and Prevention.

    Science.gov (United States)

    Chen, Zhuo; Roy, Kakoli; Gotway Crawford, Carol A

    2010-03-01

    During the past decade, efforts to promote gender parity in the healing and public health professions have met with only partial success. We provide a critical update regarding the status of women in the public health profession by exploring gender-related differences in promotion rates at the nation's leading public health agency, the Centers for Disease Control and Prevention (CDC). Using personnel data drawn from CDC, we found that the gender gap in promotion has diminished across time and that this reduction can be attributed to changes in individual characteristics (e.g., higher educational levels and more federal work experience). However, a substantial gap in promotion that cannot be explained by such characteristics has persisted, indicating continuing barriers in women's career advancement.

  4. Water Pollution Control Legislation in Israel: Understanding Implementation Processes from an Actor-Centered Approach

    Directory of Open Access Journals (Sweden)

    Sharon Hophmayer-Tokich

    2013-09-01

    Full Text Available In the State of Israel, advanced legislation for the management of scarce water resources, including legislation to prevent water pollution, were put in place in the early stages of the State’s formation. Despite that, on-going uncontrolled pollution has deteriorated the quality of water sources for decades, with the main source of pollution being untreated or partially treated domestic wastewater. This has been mainly the result of lack of enforcement of the existing laws. During the 1990s and onwards, a shift to forceful enforcement has been observed and wastewater treatment substantially improved. The paper analyzes the implementation processes of the pollution control legislations (the lack-of and the shift to forceful enforcement based on an actor-centered approach, using the contextual interaction theory.

  5. Space Station Environmental Control and Life Support System Test Facility at Marshall Space Flight Center

    Science.gov (United States)

    Springer, Darlene

    1989-01-01

    Different aspects of Space Station Environmental Control and Life Support System (ECLSS) testing are currently taking place at Marshall Space Flight Center (MSFC). Unique to this testing is the variety of test areas and the fact that all are located in one building. The north high bay of building 4755, the Core Module Integration Facility (CMIF), contains the following test areas: the Subsystem Test Area, the Comparative Test Area, the Process Material Management System (PMMS), the Core Module Simulator (CMS), the End-use Equipment Facility (EEF), and the Pre-development Operational System Test (POST) Area. This paper addresses the facility that supports these test areas and briefly describes the testing in each area. Future plans for the building and Space Station module configurations will also be discussed.

  6. Aging Management Guideline for commercial nuclear power plants: Motor control centers

    International Nuclear Information System (INIS)

    Toman, G.; Gazdzinski, R.; O'Hearn, E.

    1994-02-01

    This Aging Management Guideline (AMG) provides recommended methods for effective detection and mitigation of age-related degradation mechanisms in Boiling Water Reactor (BWR) and Pressurized Water Reactor (PWR) commercial nuclear power plant motor control centers important to license renewal. The intent of this AMG is to assist plant maintenance and operations personnel in maximizing the safe, useful life of these components. It also supports the documentation of effective aging management programs required under the License Renewal Rule 10 CFR Part 54. This AMG is presented in a manner that allows personnel responsible for performance analysis and maintenance to compare their plant-specific aging mechanisms (expected or already experienced) and aging management program activities to the more generic results and recommendations presented herein

  7. Relating calls to US poison centers for potential exposures to medications to Centers for Disease Control and Prevention reporting of influenza-like illness.

    Science.gov (United States)

    Beauchamp, Gillian A; McKeown, Nathanael J; Rodriguez, Sergio; Spyker, Daniel A

    2016-03-01

    The Centers for Disease Control (CDC) monitors influenza like illness (ILI) and the National Poison Data System (NPDS) warehouses call data uploaded by US poison centers regarding reported exposures to medication. We examined the relationship between calls to poison centers regarding reported exposures to medications commonly used to treat ILI and weekly reports of ILI. The CDC reports ILI, by age group, for each of 10 Health and Human Services (HHS) regions. We examined NPDS summary data from calls reported to poison centers regarding reported exposures to acetaminophen, cough/cold medications, and promethazine, for the same weeks, age groups, and HHS regions for influenza seasons 2000-2013. ILI and NPDS exposures were examined using graphical plots, descriptive statistics, stepwise regression analysis, and Geographic Information Systems (GIS). About 5,101,841 influenza-like illness cases were reported to the CDC, and 2,122,940 calls regarding reported exposures to medications commonly used to treat ILI, were reported by poison centers to the NPDS over the 13 flu seasons. Analysis of stepwise models of the linear untransformed data involving 24 NPDS data groups and for 60 ILI measures, over the 13 influenza seasons, demonstrated that reported exposures to medications used to treat ILI correlated with reported cases of ILI with a median R(2 )=( )0.489 (min R(2 )=( )0.248, max R(2 )=( )0.717), with mean ± SD of R(2 )=( )0.494 ± 0.121. Median number of parameters used (degrees of freedom - 1) was 7. NPDS data regarding poison center calls for selected ILI medication exposures were highly correlated with CDC ILI data. Since NPDS data are available in real time, it provides complimentary ILI monitoring. This approach may provide public health value in predicting other illnesses which are not currently as thoroughly monitored.

  8. Contamination Control and Hardware Processing Solutions at Marshall Space Flight Center

    Science.gov (United States)

    Burns, DeWitt H.; Hampton, Tammy; Huey, LaQuieta; Mitchell, Mark; Norwood, Joey; Lowrey, Nikki

    2012-01-01

    The Contamination Control Team of Marshall Space Flight Center's Materials and Processes Laboratory supports many Programs/ Projects that design, manufacture, and test a wide range of hardware types that are sensitive to contamination and foreign object damage (FOD). Examples where contamination/FOD concerns arise include sensitive structural bondline failure, critical orifice blockage, seal leakage, and reactive fluid compatibility (liquid oxygen, hydrazine) as well as performance degradation of sensitive instruments or spacecraft surfaces such as optical elements and thermal control systems. During the design phase, determination of the sensitivity of a hardware system to different types or levels of contamination/FOD is essential. A contamination control and FOD control plan must then be developed and implemented through all phases of ground processing, and, sometimes, on-orbit use, recovery, and refurbishment. Implementation of proper controls prevents cost and schedule impacts due to hardware damage or rework and helps assure mission success. Current capabilities are being used to support recent and on-going activities for multiple Mission Directorates / Programs such as International Space Station (ISS), James Webb Space Telescope (JWST), Space Launch System (SLS) elements (tanks, engines, booster), etc. The team also advances Green Technology initiatives and addresses materials obsolescence issues for NASA and external customers, most notably in the area of solvent replacement (e.g. aqueous cleaners containing hexavalent chrome, ozone depleting chemicals (CFC s and HCFC's), suspect carcinogens). The team evaluates new surface cleanliness inspection and cleaning technologies (e.g. plasma cleaning), and maintains databases for processing support materials as well as outgassing and optical compatibility test results for spaceflight environments.

  9. Set up and operation for medical radiation exposure quality control system of health promotion center

    International Nuclear Information System (INIS)

    Kim, Jung Su; Kim, Jung Min; Jung, Hae Kyoung

    2016-01-01

    In this study, standard model of medical radiation dosage quality control system will be suggested and the useful of this system in clinical field will be reviewed. Radiation dosage information of modalities are gathered from digital imaging and communications in medicine(DICOM) standard data(such as DICOM dose SR and DICOM header) and stored in database. One CT scan, two digital radiography modalities and two mammography modalities in one health promotion center in Seoul are used to derive clinical data for one month. After 1 months research with 703 CT scans, the study shows CT 357.9 mGy·cm in abdomen and pelvic CT, 572.4 mGy·cm in brain without CT, 55.9 mGy·cm in calcium score/heart CT, screening CT at 54 mGy·cm in chest screening CT(low dose screening CT scan), 284.99 mGy·cm in C-spine CT and 341.85 mGy·cm in L-spine CT as health promotion center reference level of each exam. And with 1955 digital radiography cases, it shows 274.0 mGy·cm"2 and for mammography 6.09 mGy is shown based on 536 cases. The use of medical radiation shall comply with the principles of justification and optimization. This quality management of medical radiation exposure must be performed in order to follow the principle. And the procedure to reduce the radiation exposure of patients and staff can be achieved through this. The results of this study can be applied as a useful tool to perform the quality control of medical radiation exposure

  10. Set up and operation for medical radiation exposure quality control system of health promotion center

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jung Su; Kim, Jung Min [Korea University,Seoul (Korea, Republic of); Jung, Hae Kyoung [Dept. of Diagnostic Radiology, CHA Bundang Medical Center, CHA University, Sungnam (Korea, Republic of)

    2016-03-15

    In this study, standard model of medical radiation dosage quality control system will be suggested and the useful of this system in clinical field will be reviewed. Radiation dosage information of modalities are gathered from digital imaging and communications in medicine(DICOM) standard data(such as DICOM dose SR and DICOM header) and stored in database. One CT scan, two digital radiography modalities and two mammography modalities in one health promotion center in Seoul are used to derive clinical data for one month. After 1 months research with 703 CT scans, the study shows CT 357.9 mGy·cm in abdomen and pelvic CT, 572.4 mGy·cm in brain without CT, 55.9 mGy·cm in calcium score/heart CT, screening CT at 54 mGy·cm in chest screening CT(low dose screening CT scan), 284.99 mGy·cm in C-spine CT and 341.85 mGy·cm in L-spine CT as health promotion center reference level of each exam. And with 1955 digital radiography cases, it shows 274.0 mGy·cm{sup 2} and for mammography 6.09 mGy is shown based on 536 cases. The use of medical radiation shall comply with the principles of justification and optimization. This quality management of medical radiation exposure must be performed in order to follow the principle. And the procedure to reduce the radiation exposure of patients and staff can be achieved through this. The results of this study can be applied as a useful tool to perform the quality control of medical radiation exposure.

  11. Readability assessment of concussion and traumatic brain injury publications by Centers for Disease Control and Prevention

    Science.gov (United States)

    Gill, Preetinder S; Gill, Tejkaran S; Kamath, Ashwini; Whisnant, Billy

    2012-01-01

    Health literacy is associated with a person’s capacity to find, access, contextualize, and understand information needed for health care-related decisions. The level of health literacy thus has an influence on an individual’s health status. It can be argued that low health literacy is associated with poor health status. Health care literature (eg, pamphlets, brochures, postcards, posters, forms) are published by public and private organizations worldwide to provide information to the general public. The ability to read, use, and understand is critical to the successful application of knowledge disseminated by this literature. This study assessed the readability, suitability, and usability of health care literature associated with concussion and traumatic brain injury published by the United States Centers for Disease Control and Prevention. The Flesch–Kincaid Grade Level, Flesch Reading Ease, Gunning Fog, Simple Measure of Gobbledygook, and Suitability Assessment of Materials indices were used to assess 40 documents obtained from the Centers for Disease Control and Prevention website. The documents analyzed were targeted towards the general public. It was found that in order to be read properly, on average, these documents needed more than an eleventh grade/high school level education. This was consistent with the findings of other similar studies. However, the qualitative Suitability Assessment of Materials index showed that, on average, usability and suitability of these documents was superior. Hence, it was concluded that formatting, illustrations, layout, and graphics play a pivotal role in improving health care-related literature and, in turn, promoting health literacy. Based on the comprehensive literature review and assessment of the 40 documents associated with concussion and traumatic brain injury, recommendations have been made for improving the readability, suitability, and usability of health care-related documents. The recommendations are

  12. High call volume at poison control centers: identification and implications for communication.

    Science.gov (United States)

    Caravati, E M; Latimer, S; Reblin, M; Bennett, H K W; Cummins, M R; Crouch, B I; Ellington, L

    2012-09-01

    High volume surges in health care are uncommon and unpredictable events. Their impact on health system performance and capacity is difficult to study. To identify time periods that exhibited very busy conditions at a poison control center and to determine whether cases and communication during high volume call periods are different from cases during low volume periods. Call data from a US poison control center over twelve consecutive months was collected via a call logger and an electronic case database (Toxicall®).Variables evaluated for high call volume conditions were: (1) call duration; (2) number of cases; and (3) number of calls per staff member per 30 minute period. Statistical analyses identified peak periods as busier than 99% of all other 30 minute time periods and low volume periods as slower than 70% of all other 30 minute periods. Case and communication characteristics of high volume and low volume calls were compared using logistic regression. A total of 65,364 incoming calls occurred over 12 months. One hundred high call volume and 4885 low call volume 30 minute periods were identified. High volume periods were more common between 1500 and 2300 hours and during the winter months. Coded verbal communication data were evaluated for 42 high volume and 296 low volume calls. The mean (standard deviation) call length of these calls during high volume and low volume periods was 3 minutes 27 seconds (1 minute 46 seconds) and 3 minutes 57 seconds (2 minutes 11 seconds), respectively. Regression analyses revealed a trend for fewer overall verbal statements and fewer staff questions during peak periods, but no other significant differences for staff-caller communication behaviors were found. Peak activity for poison center call volume can be identified by statistical modeling. Calls during high volume periods were similar to low volume calls. Communication was more concise yet staff was able to maintain a good rapport with callers during busy call periods

  13. Control of body's center of mass motion relative to center of pressure during uphill walking in the elderly.

    Science.gov (United States)

    Hong, Shih-Wun; Leu, Tsai-Hsueh; Wang, Ting-Ming; Li, Jia-Da; Ho, Wei-Pin; Lu, Tung-Wu

    2015-10-01

    Uphill walking places more challenges on the locomotor system than level walking does when the two limbs work together to ensure the stability and continuous progression of the body over the base of support. With age-related degeneration older people may have more difficulty in maintaining balance during uphill walking, and may thus experience an increased risk of falling. The current study aimed to investigate using gait analysis techniques to determine the effects of age and slope angles on the control of the COM relative to the COP in terms of their inclination angles (IA) and the rate of change of IA (RCIA) during uphill walking. The elderly were found to show IAs similar to those of the young, but with reduced self-selected walking speed and RCIAs (PIA in the sagittal plane (PIA and RCIA during walking provide a sensitive measure to differentiate individuals with different balance control abilities. The current results and findings may serve as baseline data for future clinical and ergonomic applications. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. A Framework for a General Purpose Intelligent Control System for Particle Accelerators. Phase II Final Report

    International Nuclear Information System (INIS)

    Westervelt, Robert; Klein, William; Kroupa, Michael; Olsson, Eric; Rothrock, Rick

    1999-01-01

    Vista Control Systems, Inc. has developed a portable system for intelligent accelerator control. The design is general in scope and is thus configurable to a wide range of accelerator facilities and control problems. The control system employs a multi-layer organization in which knowledge-based decision making is used to dynamically configure lower level optimization and control algorithms

  15. Hampshire College Center for Science Education. Final Report on Activities Supported by the Department of Energy Grant No. DE-FG02-06ER64256

    Energy Technology Data Exchange (ETDEWEB)

    Stillings, Neil [Hampshire College, Amherst, MA (United States); Wenk, Laura [Hampshire College, Amherst, MA (United States)

    2009-12-30

    facilitation, classroom support for teachers, and materials purchase. His presence in the schools kept teachers engaged and supported. He also brought the PVPA Charter School into the project. He worked closely with the educational outreach coordinator at Hampshire who oversaw the Day in the Lab program. Together, they have ensured the continuity of support to the schools through the use and placement of student interns. Finally, the director and coordinators worked with the Hitchock Center for the Environment to bring the two science professional development efforts in Amherst together. The joint development of workshops for elementary teachers was extremely successful. A major reason for the successes of the CESE program was the strength of the teacher outreach team and the sheer number of hours spent building relationships, talking about teaching and learning, planning projects, developing curriculum, and working with experts throughout the Pioneer Valley.

  16. Predictors of Default from Treatment for Tuberculosis: a Single Center Case-Control Study in Korea.

    Science.gov (United States)

    Park, Cheol-Kyu; Shin, Hong-Joon; Kim, Yu-Il; Lim, Sung-Chul; Yoon, Jeong-Sun; Kim, Young-Su; Kim, Jung-Chul; Kwon, Yong-Soo

    2016-02-01

    Default from tuberculosis (TB) treatment could exacerbate the disease and result in the emergence of drug resistance. This study identified the risk factors for default from TB treatment in Korea. This single-center case-control study analyzed 46 default cases and 100 controls. Default was defined as interrupting treatment for 2 or more consecutive months. The reasons for default were mainly incorrect perception or information about TB (41.3%) and experience of adverse events due to TB drugs (41.3%). In univariate analysis, low income (defaulter (15.2% vs. 2.0%, P = 0.005), and combined extrapulmonary TB (54.3% vs. 34.0%, P = 0.020) were significant risk factors for default. In multivariate analysis, the absence of TB stigma (adjusted odd ratio [aOR]: 46.299, 95% confidence interval [CI]: 8.078-265.365, P defaulters (aOR: 33.226, 95% CI: 2.658-415.309, P = 0.007), and low income (aOR: 5.246, 95% CI: 1.249-22.029, P = 0.024) were independent predictors of default from TB treatment. In conclusion, patients with absence of disease stigma, treated by a non-pulmonologist, who were former defaulters, and with low income should be carefully monitored during TB treatment in Korea to avoid treatment default.

  17. Predictors of Default from Treatment for Tuberculosis: a Single Center Case–Control Study in Korea

    Science.gov (United States)

    2016-01-01

    Default from tuberculosis (TB) treatment could exacerbate the disease and result in the emergence of drug resistance. This study identified the risk factors for default from TB treatment in Korea. This single-center case–control study analyzed 46 default cases and 100 controls. Default was defined as interrupting treatment for 2 or more consecutive months. The reasons for default were mainly incorrect perception or information about TB (41.3%) and experience of adverse events due to TB drugs (41.3%). In univariate analysis, low income (defaulter (15.2% vs. 2.0%, P = 0.005), and combined extrapulmonary TB (54.3% vs. 34.0%, P = 0.020) were significant risk factors for default. In multivariate analysis, the absence of TB stigma (adjusted odd ratio [aOR]: 46.299, 95% confidence interval [CI]: 8.078–265.365, P defaulters (aOR: 33.226, 95% CI: 2.658–415.309, P = 0.007), and low income (aOR: 5.246, 95% CI: 1.249–22.029, P = 0.024) were independent predictors of default from TB treatment. In conclusion, patients with absence of disease stigma, treated by a non-pulmonologist, who were former defaulters, and with low income should be carefully monitored during TB treatment in Korea to avoid treatment default. PMID:26839480

  18. [Qilin Pills for idiopathic oligoasthenospermia: A multi-centered randomized double-blind controlled clinical trial].

    Science.gov (United States)

    Mao, Jia-Ming; Jiang, Hui; Wang, Chuan-Hang; Ning, Ke-Qin; Liu, Ji-Hong; Yang, Shu-Wen; Li, Hai-Song; Zhou, Shao-Hu; Zhang, Zhi-Chao; Xu, Ji-Xiu; Huang, Yong-Han

    2017-03-01

    To evaluate the clinical efficacy and safety of Qilin Pills in the treatment of oligoasthenospermia in infertile men. This multi-centered randomized double-blind controlled clinical trial included 216 infertile males with oligoasthenospermia, 108 in the trial group and the other 108 in the control, the former treated with Qilin Pills at the dose of 6 g tid while the latter with Wuziyanzong Pills at 6 g bid, both for 12 weeks. We examined the total sperm count, sperm motility and the count of progressively motile sperm of the patients before and at 4, 8 and 12 weeks after medication and evaluated the safety of the drug based on the adverse events and the laboratory results of blood and urine routine examinations and liver and kidney function tests. Compared with the baseline, the patients in the trial group showed a significant time-dependent improvement after 4, 8 and 12 weeks of medication in sperm motility (21.75% vs 27.54%, 29.04% and 32.95%, P Pills can evidently improve the semen quality of oligoasthenospermia patients with no obvious adverse events.

  19. Final Report of the National Black Health Providers Task Force on High Blood Pressure Education and Control.

    Science.gov (United States)

    Public Health Service (DHHS), Rockville, MD.

    This is the final report of National Black Health Providers Task Force (NBHPTF) on High Blood Pressure Education and Control. The first chapter of the report recounts the history of the NBHPTF and its objectives. In the second chapter epidemiological evidence is presented to demonstrate the need for a suggested 20 year plan aimed at controlling…

  20. Management of pelvic inflammatory disease by primary care physicians. A comparison with Centers for Disease Control and Prevention guidelines.

    Science.gov (United States)

    Hessol, N A; Priddy, F H; Bolan, G; Baumrind, N; Vittinghoff, E; Reingold, A L; Padian, N S

    1996-01-01

    The Centers for Disease Control and Prevention published recommendations for clinicians on the management of pelvic inflammatory disease, but it is unknown if providers are aware of the guidelines or follow them. To compare pelvic inflammatory disease screening, diagnosis, treatment, and reporting practices among primary care physicians with the Centers for Disease Control and Prevention guidelines for pelvic inflammatory disease. A weighted random sample of California primary care physicians surveyed in November 1992 and January 1993. Of the 1,165 physicians surveyed, 553 (48%) returned completed questionnaires. Among respondents, 302 (55%) reported having treated a case of pelvic inflammatory disease during the last 12 months, and of these, 52% answered that they were unsure of or do not follow the Centers for Disease Control and Prevention guidelines for pelvic inflammatory disease. Pediatricians and those with more years since residency were less likely to deviate from the Centers for Disease Control and Prevention guidelines for pelvic inflammatory disease, and family practitioners were more likely to deviate from the guidelines. Pelvic inflammatory disease is commonly encountered by primary care physicians in California. Training and experience were important predictors of compliance with the Centers for Disease Control and Prevention recommendations; however, substantial divergence from the guidelines occurs.

  1. Music therapy in Huntington's disease: a protocol for a multi-center randomized controlled trial.

    Science.gov (United States)

    van Bruggen-Rufi, Monique; Vink, Annemieke; Achterberg, Wilco; Roos, Raymund

    2016-07-26

    Huntington's disease is a progressive, neurodegenerative disease with autosomal dominant inheritance, characterized by motor disturbances, cognitive decline and behavioral and psychological symptoms. Since there is no cure, all treatment is aimed at improving quality of life. Music therapy is a non-pharmacological intervention, aiming to improve the quality of life, but its use and efficacy in patients with Huntington's disease has hardly been studied. In this article, a protocol is described to study the effects of music therapy in comparison with a control intervention to improve quality of life through stimulating expressive and communicative skills. By targeting these skills we assume that the social-cognitive functioning will improve, leading to a reduction in behavioral problems, resulting in an overall improvement of the quality of life in patients with Huntington's disease. The study is designed as a multi-center single-blind randomised controlled intervention trial. Sixty patients will be randomised using centre-stratified block-permuted randomisation. Patients will be recruited from four long-term care facilities specialized in Huntington's disease-care in The Netherlands. The outcome measure to assess changes in expressive and communication skills is the Behaviour Observation Scale Huntington and changes in behavior will be assessed by the Problem Behaviour Assesment-short version and by the BOSH. Measurements take place at baseline, then 8, 16 (end of intervention) and 12 weeks after the last intervention (follow-up). This randomized controlled study will provide greater insight into the effectiveness of music therapy on activities of daily living, social-cognitive functioning and behavior problems by improving expressive and communication skills, thus leading to a better quality of life for patients with Huntington's disease. Netherlands Trial Register: NTR4904 , registration date Nov. 15, 2014.

  2. "Carbon in Underland": A multidisciplinary approach to producing an informative animated video for the Center for Nanoscale Control of Geological CO2

    Science.gov (United States)

    Molins, S.; Cappuccio, J. A.; Berry, I.; Miller, J.; Bourg, I. C.; Kelly, L. M.

    2011-12-01

    As part of the 'Science for Our Nation's Energy Future, Summit and Forum', each of the 46 Energy Frontier Research Centers (EFRCs) created in 2009 by the US Department of Energy was invited to design a short, engaging film with the central goal to educate, inspire, and entertain an intelligent but not expert audience about the extraordinary science, innovation and people in their center. The Center for Nanoscale Control of Geological CO2 (NCGC) is an EFRC that is building a next generation understanding of molecular-to-pore-scale processes critical to controlling the flow,transport, and ultimate mineralization in porous rock media, in particular as applied to geologic sequestration of CO2. In response to the invitation, the NCGC assembled a team that included several young scientists, the Center project manager, and members from the Public Affairs and Creative Services Office of the Lawrence Berkeley National Laboratory with the objective of preparing a submission. A videographer from the Creative Services Office was responsible for overall management including production, art direction, and editing, while scientists from the Center were responsible for scientific content and original storyline concept. The Center project manager facilitated the communication between team members. A group of scientists together with the project manager developed the original idea, which was refined and given shape as a script in dialogue form by a science writer from Public Affairs. The objective was to communicate scientific content in an entertaining manner with a simple storyline. In a second phase, the script was revised further by scientists for content. Clips from experiments and modeling simulations were requested from the Center's scientists to illustrate the scientific content. Video production and animation were done by the videographer and an animator in an iterative process that involve feedback from the Center team. The final cut was edited to meet the maximum length

  3. Advanced Outage and Control Center: Strategies for Nuclear Plant Outage Work Status Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Gregory Weatherby

    2012-05-01

    The research effort is a part of the Light Water Reactor Sustainability (LWRS) Program. LWRS is a research and development program sponsored by the Department of Energy, performed in close collaboration with industry to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants. The LWRS Program serves to help the US nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. The Outage Control Center (OCC) Pilot Project was directed at carrying out the applied research for development and pilot of technology designed to enhance safe outage and maintenance operations, improve human performance and reliability, increase overall operational efficiency, and improve plant status control. Plant outage management is a high priority concern for the nuclear industry from cost and safety perspectives. Unfortunately, many of the underlying technologies supporting outage control are the same as those used in the 1980’s. They depend heavily upon large teams of staff, multiple work and coordination locations, and manual administrative actions that require large amounts of paper. Previous work in human reliability analysis suggests that many repetitive tasks, including paper work tasks, may have a failure rate of 1.0E-3 or higher (Gertman, 1996). With between 10,000 and 45,000 subtasks being performed during an outage (Gomes, 1996), the opportunity for human error of some consequence is a realistic concern. Although a number of factors exist that can make these errors recoverable, reducing and effectively coordinating the sheer number of tasks to be performed, particularly those that are error prone, has the potential to enhance outage efficiency and safety. Additionally, outage management requires precise coordination of work groups that do not always share similar objectives. Outage

  4. New human-centered linear and nonlinear motion cueing algorithms for control of simulator motion systems

    Science.gov (United States)

    Telban, Robert J.

    While the performance of flight simulator motion system hardware has advanced substantially, the development of the motion cueing algorithm, the software that transforms simulated aircraft dynamics into realizable motion commands, has not kept pace. To address this, new human-centered motion cueing algorithms were developed. A revised "optimal algorithm" uses time-invariant filters developed by optimal control, incorporating human vestibular system models. The "nonlinear algorithm" is a novel approach that is also formulated by optimal control, but can also be updated in real time. It incorporates a new integrated visual-vestibular perception model that includes both visual and vestibular sensation and the interaction between the stimuli. A time-varying control law requires the matrix Riccati equation to be solved in real time by a neurocomputing approach. Preliminary pilot testing resulted in the optimal algorithm incorporating a new otolith model, producing improved motion cues. The nonlinear algorithm vertical mode produced a motion cue with a time-varying washout, sustaining small cues for longer durations and washing out large cues more quickly compared to the optimal algorithm. The inclusion of the integrated perception model improved the responses to longitudinal and lateral cues. False cues observed with the NASA adaptive algorithm were absent. As a result of unsatisfactory sensation, an augmented turbulence cue was added to the vertical mode for both the optimal and nonlinear algorithms. The relative effectiveness of the algorithms, in simulating aircraft maneuvers, was assessed with an eleven-subject piloted performance test conducted on the NASA Langley Visual Motion Simulator (VMS). Two methods, the quasi-objective NASA Task Load Index (TLX), and power spectral density analysis of pilot control, were used to assess pilot workload. TLX analysis reveals, in most cases, less workload and variation among pilots with the nonlinear algorithm. Control input

  5. Readability assessment of concussion and traumatic brain injury publications by Centers for Disease Control and Prevention

    Directory of Open Access Journals (Sweden)

    Gill PS

    2012-11-01

    Full Text Available Preetinder S Gill,1 Tejkaran S Gill,2 Ashwini Kamath,3 Billy Whisnant41College of Technology, Eastern Michigan University, Ypsilanti, MI; 2College of Engineering, University of Michigan, Ann Arbor, MI; 3School of Information, University of Texas, Austin, TX; 4College of Technology, Eastern Michigan University, Ypsilanti, MI, USAAbstract: Health literacy is associated with a person’s capacity to find, access, contextualize, and understand information needed for health care-related decisions. The level of health literacy thus has an influence on an individual’s health status. It can be argued that low health literacy is associated with poor health status. Health care literature (eg, pamphlets, brochures, postcards, posters, forms are published by public and private organizations worldwide to provide information to the general public. The ability to read, use, and understand is critical to the successful application of knowledge disseminated by this literature. This study assessed the readability, suitability, and usability of health care literature associated with concussion and traumatic brain injury published by the United States Centers for Disease Control and Prevention. The Flesch–Kincaid Grade Level, Flesch Reading Ease, Gunning Fog, Simple Measure of Gobbledygook, and Suitability Assessment of Materials indices were used to assess 40 documents obtained from the Centers for Disease Control and Prevention website. The documents analyzed were targeted towards the general public. It was found that in order to be read properly, on average, these documents needed more than an eleventh grade/high school level education. This was consistent with the findings of other similar studies. However, the qualitative Suitability Assessment of Materials index showed that, on average, usability and suitability of these documents was superior. Hence, it was concluded that formatting, illustrations, layout, and graphics play a pivotal role in improving

  6. Fusion reactor control study. Volume 3. Tandem mirror reactors. Final report

    International Nuclear Information System (INIS)

    Chang, F.R.; DeCanio, F.; Fisher, J.L.; Madden, P.A.

    1982-03-01

    A study of the control requirements of the Tandem Mirror Reactor concept is reported. The study describes the development of a control simulator that is based upon a spatially averaged physics code of the reactor concept. The simulator portrays the evolution of the plasma through the complete reactor operating cycle; it includes models of the control and measurement system, thus allowing the exploration of various strategies for reactor control. Startup, shutdown, and control during the quasi-steady-state power producing phase were explored. Configurations are described which use a variety of control effectors including modulation of the refueling rate, beam current, and electron cyclotron resonance heating. Multivariable design techniques were used to design the control laws and compensators for the feedback controllers and presume the practical measurement of only a subset of the plasma and machine variables. Performance of the various controllers is explored using the nonlinear control simulator. Derivative control strategies using new or developed sensors and effectors appropriate to a power reactor environment are postulated, based upon the results of the control configurations tested. Research and development requirements for these controls are delineated

  7. Final Environmental Impact Statement for the construction and operation of Claiborne Enrichment Center, Homer, Louisiana (Docket No. 70-3-70). Volume 2, Public comments and NRC response

    International Nuclear Information System (INIS)

    Zeitoun, A.

    1994-08-01

    The Final Environmental Impact Statement (FEIS) (Volume 1), was prepared by the Nuclear Regulatory Commission (NRC) in accordance with regulation 10 CFR Part 51, which implements the National Environmental Policy Act (NEPA), to assess the potential environmental impacts for licensing the construction and operation of a proposed gaseous centrifuge enrichment facility to be built in Claiborne Parish, Louisiana by Louisiana Energy Services, L.P. (LES). The proposed facility would have a production capacity of about 866 metric tons annually of up to 5 weight percent enriched UF 6 , using a proven centrifuge technology. Included in the assessment are co on, both normal operations and potential accidents (internal and external events), and the eventual decontamination and decommissioning of the site. In order to help assure that releases from the operation of the facility and potential impacts on the public are as low as reasonably achievable, an environmental monitoring program was developed by LES to detect significant changes in the background levels of uranium around the site. Other issues addressed include the purpose and need for the facility, the alternatives to the proposed action, potential disposition of the tails, the site selection process, and environmental justice. The NRC staff concludes that the facility can be constructed and operated with small and acceptable impacts on the public and the environment, and proposes to issue a license to the applicant, Louisiana Energy Services, to authorize construction and operation of the proposed facility. The letters in this Appendix have been divided into three sections. Section One contains letters to which the NRC responded by addressing specific comments. Section Two contains the letters that concerned the communities of Forest Grove and Center Springs. Section Three is composed of letters that required no response. These letters were generally in support of the facility

  8. Final Environmental Impact Statement for the construction and operation of Claiborne Enrichment Center, Homer, Louisiana (Docket No. 70-3-70). Volume 2, Public comments and NRC response

    Energy Technology Data Exchange (ETDEWEB)

    Zeitoun, A. [Science Applications International Corp., Germantown, MD (United States)

    1994-08-01

    The Final Environmental Impact Statement (FEIS) (Volume 1), was prepared by the Nuclear Regulatory Commission (NRC) in accordance with regulation 10 CFR Part 51, which implements the National Environmental Policy Act (NEPA), to assess the potential environmental impacts for licensing the construction and operation of a proposed gaseous centrifuge enrichment facility to be built in Claiborne Parish, Louisiana by Louisiana Energy Services, L.P. (LES). The proposed facility would have a production capacity of about 866 metric tons annually of up to 5 weight percent enriched UF{sub 6}, using a proven centrifuge technology. Included in the assessment are co on, both normal operations and potential accidents (internal and external events), and the eventual decontamination and decommissioning of the site. In order to help assure that releases from the operation of the facility and potential impacts on the public are as low as reasonably achievable, an environmental monitoring program was developed by LES to detect significant changes in the background levels of uranium around the site. Other issues addressed include the purpose and need for the facility, the alternatives to the proposed action, potential disposition of the tails, the site selection process, and environmental justice. The NRC staff concludes that the facility can be constructed and operated with small and acceptable impacts on the public and the environment, and proposes to issue a license to the applicant, Louisiana Energy Services, to authorize construction and operation of the proposed facility. The letters in this Appendix have been divided into three sections. Section One contains letters to which the NRC responded by addressing specific comments. Section Two contains the letters that concerned the communities of Forest Grove and Center Springs. Section Three is composed of letters that required no response. These letters were generally in support of the facility.

  9. Study of the application of advanced control systems to fusion experiments and reactors. Final report

    International Nuclear Information System (INIS)

    1974-05-01

    The work accomplished to date toward the formulation of an advanced control system concept for large-scale magnetically confined thermonuclear fusion devices is summarized. The work was concentrated in three major areas: (1) general control studies and identification of control issues, (2) exploration of possible direct interactions with AEC National Laboratories, and (3) identification of simulation requirements to support control studies. (U.S.)

  10. 75 FR 37453 - Notice of Issuance of Final Determination Concerning Dimmer and Fan Speed Switch Controls

    Science.gov (United States)

    2010-06-29

    ... Determination Concerning Dimmer and Fan Speed Switch Controls AGENCY: U.S. Customs and Border Protection... country of origin of certain dimmer and fan speed switch controls which may be offered to the United... determination CBP concluded that Mexico is the country of origin of the dimmer and fan speed switch controls for...

  11. Integrated environmental control and monitoring in the intelligent workplace. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This project involved the design and engineering of the control and monitoring of environmental quality - visual, thermal, air - in the Intelligent Workplace. The research objectives were to study the performance of the individual systems, to study the integration issues related to each system, to develop a control plan, and to implement and test the integrated systems in a real setting. In this project, a control strategy with related algorithms for distributed sensors, actuators, and controllers for negotiating central and individual control of HVAC, lighting, and enclosure was developed in order to maximize user comfort, and energy and environmental effectiveness. The goal of the control system design in the Intelligent Workplace is the integration of building systems for optimization of occupant satisfaction, organizational flexibility, energy efficiency and environmental effectiveness. The task of designing this control system involves not only the research, development and demonstration of state-of-the-art mechanical and electrical systems, but also their integration. The ABSIC research team developed functional requirements for the environmental systems considering the needs of both facility manager and the user. There are three levels of control for the environmental systems: scheduled control, sensor control, and user control. The challenges are to achieve the highest possible levels of energy effectiveness simultaneously with the highest levels of user satisfaction. The report describes the components of each system, their implementation in the Intelligent Workplace and related control and monitoring issues.

  12. Final Report- "An Algorithmic and Software Framework for Applied Partial Differential Equations (APDEC): A DOE SciDAC Integrated Software Infrastructure Center (ISIC)

    Energy Technology Data Exchange (ETDEWEB)

    Elbridge Gerry Puckett

    2008-05-13

    this he had been a Deputy Section Head at the National Center for Atmospheric Research in Colorado. My understanding is that Chris Algieri is the first person that Bill hired after coming to LBNL. The plan is that Chris Algieri will finish his PhD thesis while employed as a staff scientist in Bill's group. Both Sarah and Chris were supported in part with funds from DE-FC02-01ER25473. In Sarah's case she received support both while at U.C. Davis (UCD) taking classes and writing an MS thesis and during some of the time she was living in Berkeley, working at LBNL and finishing her PhD thesis. In Chris' case he was at U.C. Davis during the entire time he received support from DE-FC02-01ER25473. More specific details of their work are included in the report below. Finally my own research conducted under the auspices of DE-FC02-01ER25473 either involved direct collaboration with researchers at LBNL - Phil Colella and Peter Schwartz who is a member of Phil's Applied Numerical Algorithms Group - or was on problems that are closely related to research that has been and continues to be conducted by researchers at LBNL. Specific details of this work can be found below. Finally, I would like to note that the work conducted by my students and me under the auspices of this contract is closely related to work that I have performed with funding from my DOE MICS contract DE-FC02-03ER25579 'Development of High-Order Accurate Interface Tracking Algorithms and Improved Constitutive Models for Problems in Continuum Mechanics with Applications to Jetting' and with my CoPI on that grant Professor Greg Miller of the Department of Applied Science at UCD. In theory I tried to use funds from the SciDAC grant DE-FC02-01ER25473 to support work that directly involved implementing algorithms developed by my research group at U.C. Davis in software that was developed and is maintained by my SciDAC CoPI's at LBNL.

  13. Kennedy Space Center Timing and Countdown Interface to Kennedy Ground Control Subsystem

    Science.gov (United States)

    Olsen, James C.

    2015-01-01

    Kennedy Ground Control System (KGCS) engineers at the National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC) are developing a time-tagging process to enable reconstruction of the events during a launch countdown. Such a process can be useful in the case of anomalies or other situations where it is necessary to know the exact time an event occurred. It is thus critical for the timing information to be accurate. KGCS will synchronize all items with Coordinated Universal Time (UTC) obtained from the Timing and Countdown (T&CD) organization. Network Time Protocol (NTP) is the protocol currently in place for synchronizing UTC. However, NTP has a peak error that is too high for today's standards. Precision Time Protocol (PTP) is a newer protocol with a much smaller peak error. The focus of this project has been to implement a PTP solution on the network to increase timing accuracy while introducing and configuring the implementation of a firewall between T&CD and the KGCS network.

  14. Investigation and Development of Control Laws for the NASA Langley Research Center Cockpit Motion Facility

    Science.gov (United States)

    Coon, Craig R.; Cardullo, Frank M.; Zaychik, Kirill B.

    2014-01-01

    The ability to develop highly advanced simulators is a critical need that has the ability to significantly impact the aerospace industry. The aerospace industry is advancing at an ever increasing pace and flight simulators must match this development with ever increasing urgency. In order to address both current problems and potential advancements with flight simulator techniques, several aspects of current control law technology of the National Aeronautics and Space Administration (NASA) Langley Research Center's Cockpit Motion Facility (CMF) motion base simulator were examined. Preliminary investigation of linear models based upon hardware data were examined to ensure that the most accurate models are used. This research identified both system improvements in the bandwidth and more reliable linear models. Advancements in the compensator design were developed and verified through multiple techniques. The position error rate feedback, the acceleration feedback and the force feedback were all analyzed in the heave direction using the nonlinear model of the hardware. Improvements were made using the position error rate feedback technique. The acceleration feedback compensator also provided noteworthy improvement, while attempts at implementing a force feedback compensator proved unsuccessful.

  15. The Neural-fuzzy Thermal Error Compensation Controller on CNC Machining Center

    Science.gov (United States)

    Tseng, Pai-Chung; Chen, Shen-Len

    The geometric errors and structural thermal deformation are factors that influence the machining accuracy of Computer Numerical Control (CNC) machining center. Therefore, researchers pay attention to thermal error compensation technologies on CNC machine tools. Some real-time error compensation techniques have been successfully demonstrated in both laboratories and industrial sites. The compensation results still need to be enhanced. In this research, the neural-fuzzy theory has been conducted to derive a thermal prediction model. An IC-type thermometer has been used to detect the heat sources temperature variation. The thermal drifts are online measured by a touch-triggered probe with a standard bar. A thermal prediction model is then derived by neural-fuzzy theory based on the temperature variation and the thermal drifts. A Graphic User Interface (GUI) system is also built to conduct the user friendly operation interface with Insprise C++ Builder. The experimental results show that the thermal prediction model developed by neural-fuzzy theory methodology can improve machining accuracy from 80µm to 3µm. Comparison with the multi-variable linear regression analysis the compensation accuracy is increased from ±10µm to ±3µm.

  16. Cost-effective control systems for solar heating and cooling applications. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Pejsa, J. H.; Bassett, W. W.; Wenzler, S. A.; Nguyen, K. H.; Olson, T. J.

    1978-09-01

    A methodology has been defined to arrive at control recommendations for a variety of climate control system designs, applications and regions, and the results are presented in two parts. Part I consists of a literature and market-place survey, involving control strategies, functions, sensors, actuators, and the controllers themselves. Part II represents the bulk of the study effort - an attempt to simulate and evaluate system performance for several representative residential and commercial heating and cooling designs and thus to derive improved performance techniques within cost-effective control systems. (MHR)

  17. Electric Power Research Institute Environmental Control Technology Center: Report to the Steering Committee, June 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s (EPRI`s) Environmental Control Technology Center (ECTC). Testing for the Hazardous Air Pollutant (HAP) test block was conducted using the 4.0 MW Spray Dryer Absorber System (SDA) and Pulse Jet Fabric Filter (PJFF) - Carbon Injection System. Investigations also continued across the B&W/CHX Heat Exchanger unit, while the 1.0 MW Selective Catalytic Reduction (SCR) unit remained idle this month in a cold-standby mode as monthly inspections were conducted. Pilot Testing Highlights Testing efforts in June were focused on the HAP test block and the Trace Elements Removal (TER) test block. Both programs were conducted on the 4.0 MW wet FGD pilot unit and PJFF unit. The HAP test block was temporarily concluded in June to further review the test data. This program began in March as part of the DOE Advanced Power Systems Program; the mission of this program is to accelerate the commercialization of affordable, high-efficiency, low-emission, coal-fueled electric generating technologies. The 1996 HAP test block focuses on three research areas, including: Catalytic oxidation of vapor-phase elemental mercury; Enhanced particulate-phase HAPs removal by electrostatic charging of liquid droplets; and Enhanced mercury removal by addition of additives to FGD process liquor. The TER test block is part of EPRI`s overall program to develop control technology options for reduction of trace element emissions. This experimental program investigates mercury removal and mercury speciation under different operating conditions.

  18. Weight Loss and Glycemic Control after Sleeve Gastrectomy: Results from a Middle Eastern Center of Excellence.

    Science.gov (United States)

    Al Khalifa, Khalid; Al Ansari, Ahmed; Showaiter, May

    2018-02-01

    Obesity and its associated metabolic disorders are strongly linked to both morbidity and mortality. Sleeve gastrectomy (SG) has been established as an effective means of weight loss for obese patients as well as a treatment for type 2 diabetes mellitus (T2DM). This study was designed to examine the short- and midterm outcomes of patients who underwent SG in a Middle Eastern Center of Excellence, a military training teaching hospital. The clinical outcomes of 59 patients with impaired glucose tolerance and T2DM who underwent SG between 2011 and 2014 with at least one and up to four years of follow-up were studied. Data were collected and compared, including the pre- and post-surgery measures of weight, body mass index, glycosylated hemoglobin (HbA1c), and fasting blood glucose. Complete remission was defined as a fasting blood glucose level ≤100 mg/dL, an HbA1c ≤6 mg/dL, without use of antidiabetic medications. All patients showed significant reduction in body mass index following SG. Tight glycemic control was achieved among both diabetic and prediabetic patients. In this study, 88.14 per cent of all patients (diabetic and prediabetic) achieved complete resolution from their impaired glucose tolerance and T2DM and maintained normal blood glucose and HbA1C levels from one to four years postoperatively. SG is beneficial both in terms of short- and midterm weight loss and glucose control in both diabetic and prediabetic obese patients.

  19. Human factors methods for nuclear control room design. Volume I. Human factors enhancement of existing nuclear control rooms. Final report

    International Nuclear Information System (INIS)

    Seminara, J.L.; Seidenstein, S.; Eckert, S.K.; Smith, D.L.

    1979-11-01

    Human factors engineering is an interdisciplinary specialty concerned with influencing the design of equipment systems, facilities, and operational environments to promote safe, efficient, and reliable operator performance. Human factors approaches were applied in the design of representative nuclear power plant control panels. First, methods for upgrading existing operational control panels were examined. Then, based on detailed human factors analyses of operator information and control requirements, designs of reactor, feedwater, and turbine-generator control panels were developed to improve the operator-control board interface, thereby reducing the potential for operator errors. In addition to examining present-generation concepts, human factors aspects of advanced systems and of hybrid combinations of advanced and conventional designs were investigated. Special attention was given to warning system designs. Also, a survey was conducted among control board designers to (1) develop an overview of design practices in the industry, and (2) establish appropriate measures leading to a more systematic concern for human factors in control board design

  20. Technical study for the automation and control of processes of the chemical processing plant for liquid radioactive waste at Racso Nuclear Center

    International Nuclear Information System (INIS)

    Quevedo D, M.; Ayala S, A.

    1997-01-01

    The purpose of this study is to introduce the development of an automation and control system in a chemical processing plant for liquid radioactive waste of low and medium activity. The control system established for the chemical processing plant at RACSO Nuclear Center is described. It is an on-off sequential type system with feedback. This type of control has been chosen according to the volumes to be treated at the plant as processing is carried out by batches. The system will be governed by a programmable controller (PLC), modular, with a minimum of 24 digital inputs, 01 analog input, 16 digital outputs and 01 analog input. Digital inputs and outputs are specifically found at the level sensors of the tanks and at the solenoid-type electro valve control. Analog inputs and outputs have been considered at the pH control. The comprehensive system has been divided into three control bonds, The bonds considered for the operation of the plant are described, the plant has storing, fitting, processing and clarifying tanks. National Instruments' Lookout software has been used for simulation, constituting an important tool not only for a design phase but also for a practical one since this software will be used as SCADA system. Finally, the advantages and benefits of this automation system are analyzed, radiation doses received by occupationally exposed workers are reduced and reliability on the operation on the system is increased. (authors)

  1. Implementation considerations for digital control systems in power plants: Final report

    International Nuclear Information System (INIS)

    Shah, S.C.; Lehman, L.L.; Sarchet, M.M.

    1988-09-01

    Conversion of nuclear power plants fron analog to digital control systems will require careful design, testing, and integration of the control algorithms, the software which implements the algorithms, the digital instrumentation, the digital communications network, and analog/digital device interfaces. Digital control systems are more flexible than their analog counterparts, and therefore greater attention must be paid by the customer to all stages of the control system design process. This flexibility also provides the framework for development of significant safety and reliability are inherant aspects of the chosen design processes. Digital control algorithms are capable of improving their performance by on-line self-tuning of the control parameters. It is therefore incumbant on system designers to choose self-tuning algorithms for power plant control. Implementation of these algorithms in software required a careful software design and development process to minimize errors in interpretation of the engineering design and prevent the inclusion of programming errors during software production. Digital control system and communications software must exhibit sufficient ''fault tolerance'' to maintain some level of safe plant operation or execute a safe plant shutdown in the event of both hard equipment failures and the appearance of software design faults. A number of standardized digital communications protocols are available to designers of digital control systems. These standardized digital communications protocols provide reliable fault tolerant communication between all digital elements of the plant control system and can be implemented redundantly to further enhance power plant operational safety. 5 refs., 11 figs., 1 tab

  2. Transfusion Complications in Thalassemia Patients: A Report from the Centers for Disease Control and Prevention (CDC)

    Science.gov (United States)

    Vichinsky, Elliott; Neumayr, Lynne; Trimble, Sean; Giardina, Patricia J.; Cohen, Alan R.; Coates, Thomas; Boudreaux, Jeanne; Neufeld, Ellis J.; Kenney, Kristy; Grant, Althea; Thompson, Alexis A.

    2015-01-01

    Background and Study Objectives Transfusions are the primary therapy for thalassemia but have significant cumulative risks. In 2004, the Centers for Disease Control and Prevention (CDC) established a national blood safety monitoring program for thalassemia. The purpose of this report is to summarize the patient population as well as previous non-immune and immune transfusion complications at the time of enrollment into the program. A focus on factors associated with allo- and auto-immunization in chronically transfused patients and a description of blood product preparation and transfusion practices at the participating institutions are included. Study Design and Methods The CDC Thalassemia Blood Safety Network is a consortium of thalassemia centers, longitudinally following patients to determine transfusion-related complications. Enrollment occurred from 2004 through 2012 and annual data collection is ongoing. Demographic data, transfusion history, and previous transfusion and non-transfusion complications were summarized for patients enrolled between 2004 and 2011. Logistic analyses of factors associated with allo- and auto-immunization were developed. Summary statistics of infections reported at the time of enrollment were also calculated. Results The race/ethnicity of the 407 thalassemia patients enrolled in the Network was predominantly Asian or Caucasian and 27% were immigrants. The average age was 22.3 years ± 13.2 and patients received an average total number of 149 ± 103.4 units of red blood cells. Iron-induced multi-organ dysfunction was common despite chelation. At study entry, 86 patients had previously been exposed to possible transfusion-associated pathogens, including Hepatitis-C (61), Hepatitis B (20), Hepatitis A (3), Parvovirus (9), HIV (4), malaria (1), staphylococcus aureus (1) and babesia (1). As 27% of the population was born outside of the United States (India, Pakistan, Thailand, China, Vietnam and Iran accounting for 57%), the source of

  3. Development of a modular integrated control architecture for flexible manipulators. Final report

    International Nuclear Information System (INIS)

    Burks, B.L.; Battiston, G.

    1994-01-01

    In April 1994, ORNL and SPAR completed the joint development of a manipulator controls architecture for flexible structure controls under a CRADA between the two organizations. The CRADA project entailed design and development of a new architecture based upon the Modular Integrated Control Architecture (MICA) previously developed by ORNL. The new architecture, dubbed MICA-II, uses an object-oriented coding philosophy to provide a highly modular and expandable architecture for robotic manipulator control. This architecture can be readily ported to control of many different manipulator systems. The controller also provides a user friendly graphical operator interface and display of many forms of data including system diagnostics. The capabilities of MICA-II were demonstrated during oscillation damping experiments using the Flexible Beam Experimental Test Bed at Hanford

  4. Research on Using the Naturally Cold Air and the Snow for Data Center Air-conditioning, and Humidity Control

    Science.gov (United States)

    Tsuda, Kunikazu; Tano, Shunichi; Ichino, Junko

    To lower power consumption has becomes a worldwide concern. It is also becoming a bigger area in Computer Systems, such as reflected by the growing use of software-as-a-service and cloud computing whose market has increased since 2000, at the same time, the number of data centers that accumulates and manages the computer has increased rapidly. Power consumption at data centers is accounts for a big share of the entire IT power usage, and is still rapidly increasing. This research focuses on the air-conditioning that occupies accounts for the biggest portion of electric power consumption by data centers, and proposes to develop a technique to lower the power consumption by applying the natural cool air and the snow for control temperature and humidity. We verify those effectiveness of this approach by the experiment. Furthermore, we also examine the extent to which energy reduction is possible when a data center is located in Hokkaido.

  5. Radiological protection and routinary controls of an activimeter with a cesium and barium sources in an nuclear medicine center

    International Nuclear Information System (INIS)

    Morales L, M.E.

    2006-01-01

    In the present work the results when carrying out the routine controls in a Deluxe Isotope (Calibrator II) equipment, with some sources of Cesium 137 and Barium 133, in a Nuclear Medicine Center that operates from the year 1983 in a modern one construction inside the Institute of Neoplastic Illnesses (INEN) are shown. Taking in account the Radiological Protection measures to verify if the equipment responds to the personnel's demands in the measurements of activities of the diverse radionuclides that are used in different types of exams that are carried out in this Nuclear Medicine Center are the objectives of this work. This Center was equipped initially with donated equipment by the International Atomic Energy Agency (IAEA) with those that it develops assistance, educational works and of research, giving services to patients of the INEN and other public and private medical centers. (Author)

  6. Technical appendix for the special safeguards study on material control and accounting systems. Final report

    International Nuclear Information System (INIS)

    1975-01-01

    The appendixes contain information on alarm levels for detection of theft, computer simulation of theft detection capabilities, benefits and liabilities related to real-time material control, cost analysis, and impact of collocated facilities on the real-time material control concept

  7. Human Factors Analysis of Pipeline Monitoring and Control Operations: Final Technical Report

    Science.gov (United States)

    2008-11-26

    The purpose of the Human Factors Analysis of Pipeline Monitoring and Control Operations project was to develop procedures that could be used by liquid pipeline operators to assess and manage the human factors risks in their control rooms that may adv...

  8. Quantum Control of a Nitrogen-Vacancy Center using Surface Acoustic Waves in the Resolved Sideband Limit

    Science.gov (United States)

    Golter, David; Oo, Thein; Amezcua, Maira; Wang, Hailin

    Micro-electromechanical systems research is producing increasingly sophisticated tools for nanophononic applications. Such technology is well-suited for achieving chip-based, integrated acoustic control of solid-state quantum systems. We demonstrate such acoustic control in an important solid-state qubit, the diamond nitrogen-vacancy (NV) center. Using an interdigitated transducer to generate a surface acoustic wave (SAW) field in a bulk diamond, we observe phonon-assisted sidebands in the optical excitation spectrum of a single NV center. This exploits the strong strain sensitivity of the NV excited states. The mechanical frequencies far exceed the relevant optical linewidths, reaching the resolved-sideband regime. This enables us to use the SAW field for driving Rabi oscillations on the phonon-assisted optical transition. These results stimulate the further integration of SAW-based technologies with the NV center system.

  9. Design and implementation of robust decentralized control laws for the ACES structure at Marshall Space Flight Center

    Science.gov (United States)

    Collins, Emmanuel G., Jr.; Phillips, Douglas; Hyland, David C.

    1990-01-01

    An experiment was conducted to design controllers that would provide substantial reduction of line-of-sight control errors. The satisfaction of this objective required the controllers to attenuate the beam vibration significantly. Particular emphasis was placed on controller simplicity (i.e., reduced-order and decentralized controller architectures). Complexity reduction in control law implementation is of paramount interest due to stringent limitations on throughput of even state-of-the-art space qualified processors. The results of this experiment successfully demonstrate active vibrator control for a flexible structure. The testbed is the ACES structure at the NASA Marshall Space Flight Center. The ACES structure is dynamically traceable to future space systems and especially allows the study of line-of-sight control issues.

  10. HTR 500: Final report of the project '' uniaxial creep tests at controlled temperature''

    International Nuclear Information System (INIS)

    1992-03-01

    The report presents the results of creep trials with HTR-concrete, which were carried out in the scope of development of prestressed concrete - reactor pressure vessels at the ETH Lausanne Institute for Steel and Prestressed Concrete. With temperature, an increase of creep and shrinkage was observed, a lesser dependence on exhaustion and type of concrete. The point in time of reaching the final value is not dependent on temperature for creep, but is for shrinkage. The modulus of elasticity depends on the temperature pre-treatment, but only insignificantly on the test temperature. figs., tabs

  11. Heart transplant outcomes in recipients of Centers for Disease Control (CDC) high risk donors.

    Science.gov (United States)

    Tsiouris, Athanasios; Wilson, Lynn; Sekar, Rajesh B; Mangi, Abeel A; Yun, James J

    2016-12-01

    A lack of donor hearts remains a major limitation of heart transplantation. Hearts from Centers for Disease Control (CDC) high-risk donors can be utilized with specific recipient consent. However, outcomes of heart transplantation with CDC high-risk donors are not well known. We sought to define outcomes, including posttransplant hepatitis and human immunodeficiency virus (HIV) status, in recipients of CDC high-risk donor hearts at our institution. All heart transplant recipients from August 2010 to December 2014 (n = 74) were reviewed. Comparison of 1) CDC high-risk donor (HRD) versus 2) standard-risk donor (SRD) groups were performed using chi-squared tests for nominal data and Wilcoxon two-sample tests for continuous variables. Survival was estimated with Kaplan-Meier curves. Of 74 heart transplant recipients reviewed, 66 (89%) received a SRD heart and eight (11%) received a CDC HRD heart. We found no significant differences in recipient age, sex, waiting list 1A status, pretransplant left ventricular assist device (LVAD) support, cytomegalovirus (CMV) status, and graft ischemia times (p = NS) between the HRD and SRD groups. All of the eight HRD were seronegative at the time of transplant. Postoperatively, there was no significant difference in rejection rates at six and 12 months posttransplant. Importantly, no HRD recipients acquired hepatitis or HIV. Survival in HRD versus SRD recipients was not significantly different by Kaplan-Meier analysis (log rank p = 0.644) at five years posttransplant. Heart transplants that were seronegative at the time of transplant had similar posttransplant graft function, rejection rates, and five-year posttransplant survival versus recipients of SRD hearts. At our institution, no cases of hepatitis or HIV occurred in HRD recipients in early follow-up. © 2016 Wiley Periodicals, Inc.

  12. [YANG's pricking-cupping therapy for knee osteoarthritis: a multi-center randomized controlled trial].

    Science.gov (United States)

    Wang, Bo; Liu, Xiru; Hu, Zhihai; Sun, Aijun; Ma, Yanwen; Chen Yingying; Zhang, Xuzhi; Liu, Meiling; Wang, Yi; Wang, Shuoshuo; Zhang, Yunjia; Li, Yijing; Shen, Weidong

    2016-02-01

    To evaluate the clinical efficacy of YANG's pricking-cupping therapy for knee osteoar thritis (KOA). Methods This was a multi-center randomized parallel controlled trial. One hundred and seventy one patients with KOA were randomly allocated to a pricking-cupping group (89 cases) and a conventional acu puncture group (82 cases). Neixiyan (EX-LE 4), Dubi (ST 35) and ashi points were selected in the two groups. Patients in the pricking-cupping group were treated with YANG's pricking-cupping therapy; the seven-star needles were used to perform pricking at acupoints, then cupping was used until slight bleeding was observed. Patients in the conventional acupuncture group were treated with semi-standardized filiform needle therapy. The treatment was given for 4 weeks (from a minimum of 5 times to a maximum of 10 times). The follow-up visit was 4 weeks. The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and the visual analogue scale (VAS) were adopted for the efficacy assessments. The pain score, stiffness score, physical function score and total score of WOMAC were all reduced after 4-week treatment and during follow-up visit in the two groups (all P0. 05), each score and total score of WOMAC in the pricking-cupping group were lower than those in the conventional acupuncture group after 4-week treatment and during follow-up visit (Pcupping group were lower than those in the conventional acupuncture group after 4-week treatment and during follow-up visit (P cupping and conventional acupuncture therapy can both significantly improve knee joint pain and function in patients with KOA, which are relatively safe. The pricking cupping therapy is superior to conventional acupuncture with the identical selection of acupoints.

  13. Dose control in semi industrial irradiation plant at the Ezeiza Atomic Center

    International Nuclear Information System (INIS)

    Dorda, E.M.

    1987-01-01

    In 1975 a study was initiated at the Division of Dosimetry to develop a technique and a system of dosimetry to be applied to the radiosterilization processes in the semi industrial irradiation plant of Ezeiza Atomic Center. The result of this study was the potassium nitrate/nitrite dosimeter used as routine dosimeter for control processes in food conservation, with a dose range of 0.2 kGy-1 kGy and in radiosterilization processes of disposable medical products of 1 kGy-150kGy. The potassium nitrate crystals undergo a radiolytic reduction. A linear correlation between the dose applied to the solid and the production of potassium nitrite was observed. After the irradiation of solid, the produced nitrite solution is colorimetrically titrated by measuring the absorbency in a spectrophotometer at 504 nm. The color is due to the formation of a diazonium salt and its later copulation with N-1 naphtylethylendiamine hydrochloride in acid medium. In 1980 a postal survey was organized presenting this dosimeter to standardize the irradiation dose in industrial process for Latin America. This dosimeter was presented in 1984 at the International Symposium on High Doses of the IAEA that took place in Vienna. Since them, comparative studies were performed between this dosimeter and those internationally considered and accepted: cerium(IV)/cerium(III) sulphate, ionization chamber of parallel plates, alanine. The results of comparison with the alanine dosimeter, which was used by Dr. Regula of the GSF of Munich, were the following: February 1985: 0% deviation; February 1986: 0.43% deviation. (Author)

  14. National Spill Control School. A pilot program in environmental training. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Oberholtzer, G.R.; Acuff, J.T.

    1980-01-01

    Increased environmental awareness and the amended Federal Water Pollution Control Act of 1972 required an increased level of expertise by the American Public in the field of oil spill prevention and control. The National Spill Control School was created at Corpus Christi State University to help meet this need. Drawing on the talents of a nationwide sample of experts in this field, the project team created a unique management oriented course. A review of the origination and experiences of two years of classes of this pilot program is provided in this report.

  15. Final Report: Contractor Readiness Assessment (CRA) for TREAT Fuel Movement and Control Rod Drives Isolation

    Energy Technology Data Exchange (ETDEWEB)

    Rowsell, David Leon [Idaho National Laboratory (INL), Idaho Falls, ID (United States)

    2015-06-01

    This report documents the Contractor Readiness Assessment (CRA) for TREAT Fuel Movement and Control Rod Drives Isolation. The review followed the approved Plan of Action (POA) and Implementation Plan (IP) using the identified core requirements. The activity was limited scope focusing on the control rod drives functional isolation and fuel element movement. The purpose of this review is to ensure the facility's readiness to move fuel elements thus supporting inspection and functionally isolate the control rod drives to maintain the required shutdown margin.

  16. Comparison of mental health, happiness, and emotion control with adolescents’ residential centers of state welfare organization and family reared adolescents

    Directory of Open Access Journals (Sweden)

    Laila Bawi

    2016-03-01

    Full Text Available Background and Objective: Many research indicated that adolescents’ residential centers have the high possibility to diagnose with psychological disorders. Therefore, the aim of this study was investigated the mental health, happiness and emotion control among adolescents’ residential centers of state welfare organization.Materials and Methods: This research is a causal –comparative research. The 80 adolescents’ residential centers were chosen through available sampling and 80 adolescents of schools of Alborz city were selected through cluster method. Statistical analysis was conducted by using the independent t-test. The research instruments were Emotion Control Questionnaire (ECQ, General Health Questionnaire (GHQ, Goldenberg, and Oxford Happiness Inventory (OHI.Results: The significantly different was observed in mental health, happiness and emotion control between two adolescents groups (p<0.05.Conclusion: The results indicate that the institutional-reared decrease the level of mental health, happiness and emotion control in adolescents. Thus, counselors should be considered these factors in therapeutic intervention to enhancing the mental health of adolescents’ residential centers.

  17. 77 FR 2549 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)-Ethics...

    Science.gov (United States)

    2012-01-18

    ... Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)--Ethics Subcommittee (ES... will provide counsel to the ACD, CDC, regarding a broad range of public health ethics questions and... territorial health departments in their efforts to address public health ethics challenges, approaches for...

  18. 75 FR 57044 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)-Ethics...

    Science.gov (United States)

    2010-09-17

    ... Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)--Ethics Subcommittee (ES... will provide counsel to the ACD, CDC, regarding a broad range of public health ethics questions and...; efforts to support state, tribal, local and territorial health departments address ethical issues in the...

  19. 76 FR 29755 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)-Ethics...

    Science.gov (United States)

    2011-05-23

    ... Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)--Ethics Subcommittee (ES... of public health ethics questions and issues arising from programs, scientists and practitioners... April 28, 2011, ACD, CDC meeting; discussion of next steps on addressing potential public health ethical...

  20. 76 FR 55678 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)-Ethics...

    Science.gov (United States)

    2011-09-08

    ... Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)--Ethics Subcommittee (ES... provide counsel to the ACD, CDC, regarding a broad range of public health ethics questions and issues... in their efforts to address public health ethics challenges. The agenda is subject to change as...

  1. 75 FR 30409 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention-Ethics...

    Science.gov (United States)

    2010-06-01

    ... Committee to the Director (ACD), Centers for Disease Control and Prevention--Ethics Subcommittee (ES) In... to the ACD, CDC, regarding a broad range of public health ethics questions and issues arising from... address public health ethics issues and coordination of these efforts with the CDC Office of State, Tribal...

  2. 76 FR 3909 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)-Ethics...

    Science.gov (United States)

    2011-01-21

    ... Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)--Ethics Subcommittee (ES..., regarding a broad range of public health ethics questions and issues arising from programs, scientists and... submitted on the ethical considerations document for the allocation of ventilators during a severe pandemic...

  3. 77 FR 34046 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)-Ethics...

    Science.gov (United States)

    2012-06-08

    ... Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)--Ethics Subcommittee (ES... ACD, CDC, regarding a broad range of public health ethics questions and issues arising from programs... ethics standards to the accreditation process for public health departments; ethical considerations...

  4. 75 FR 72831 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)-Ethics...

    Science.gov (United States)

    2010-11-26

    ... Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)--Ethics Subcommittee (ES... counsel to the ACD, CDC, regarding a broad range of public health ethics questions and issues arising from... strategy for addressing its charge to provide a preliminary overview to the ACD on ethical issues related...

  5. 77 FR 58397 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention-Ethics...

    Science.gov (United States)

    2012-09-20

    ... Committee to the Director (ACD), Centers for Disease Control and Prevention--Ethics Subcommittee (ES) In..., regarding a broad range of public health ethics questions and issues arising from programs, scientists and practitioners. Matters To Be Discussed: Agenda items will include the following topics: Ethical considerations...

  6. Effortful Control and Parents' Emotion Socialization Patterns Predict Children's Positive Social Behavior: A Person-Centered Approach

    Science.gov (United States)

    Miller, Rachel L.; Dunsmore, Julie C.; Smith, Cynthia L.

    2015-01-01

    Research Findings: We examined relations of effortful control with parent emotion socialization practices and child social behavior using a person-centered approach in children ages 18 months to 5 years. A total of 76 parents (66 mothers, 10 fathers) completed questionnaires at screening and 6-month follow-up. There were no age differences in…

  7. Interobserver agreement of Centers for Disease Control and Prevention criteria for classifying infections in critically ill patients

    NARCIS (Netherlands)

    Klein Klouwenberg, Peter M. C.; Ong, David S. Y.; Bos, Lieuwe D. J.; de Beer, Friso M.; van Hooijdonk, Roosmarijn T. M.; Huson, Mischa A.; Straat, Marleen; van Vught, Lonneke A.; Wieske, Luuk; Horn, Janneke; Schultz, Marcus J.; van der Poll, Tom; Bonten, Marc J. M.; Cremer, Olaf L.

    2013-01-01

    Correct classification of the source of infection is important in observational and interventional studies of sepsis. Centers for Disease Control and Prevention criteria are most commonly used for this purpose, but the robustness of these definitions in critically ill patients is not known. We

  8. Advanced Instrumentation and Control Methods for Small and Medium Reactors with IRIS Demonstration. Final Report. Volume 1

    International Nuclear Information System (INIS)

    Hines, J. Wesley; Upadhyaya, Belle R.; Doster, J. Michael; Edwards, Robert M.; Lewis, Kenneth D.; Turinsky, Paul; Coble, Jamie

    2011-01-01

    on meeting two of the eight needs outlined in the recently published 'Technology Roadmap on Instrumentation, Control, and Human-Machine Interface (ICHMI) to Support DOE Advanced Nuclear Energy Programs' which was created 'to provide a systematic path forward for the integration of new ICHMI technologies in both near-term and future nuclear power plants and the reinvigoration of the U.S. nuclear ICHMI community and capabilities.' The research consortium is led by The University of Tennessee (UT) and is focused on three interrelated topics: Topic 1 (simulator development and measurement sensitivity analysis) is led by Dr. Mike Doster with Dr. Paul Turinsky of North Carolina State University (NCSU). Topic 2 (multivariate autonomous control of modular reactors) is led by Dr. Belle Upadhyaya of the University of Tennessee (UT) and Dr. Robert Edwards of Penn State University (PSU). Topic 3 (monitoring, diagnostics, and prognostics system development) is led by Dr. Wes Hines of UT. Additionally, South Carolina State University (SCSU, Dr. Ken Lewis) participated in this research through summer interns, visiting faculty, and on-campus research projects identified throughout the grant period. Lastly, Westinghouse Science and Technology Center (Dr. Mario Carelli) was a no-cost collaborator and provided design information related to the IRIS demonstration platform and defining needs that may be common to other SMR designs. The results of this research are reported in a six-volume Final Report (including the Executive Summary, Volume 1). Volumes 2 through 6 of the report describe in detail the research and development under the topical areas. This volume serves to introduce the overall NERI-C project and to summarize the key results. Section 2 provides a summary of the significant contributions of this project. A list of all the publications under this project is also given in Section 2. Section 3 provides a brief summary of each of the five volumes (2-6) of the report. The

  9. Assessment of operators' mental workload using physiological and subjective measures in cement, city traffic and power plant control centers.

    Science.gov (United States)

    Fallahi, Majid; Motamedzade, Majid; Heidarimoghadam, Rashid; Soltanian, Ali Reza; Miyake, Shinji

    2016-01-01

    The present study aimed to evaluate the operators' mental workload (MW) of cement, city traffic control and power plant control centers using subjective and objective measures during system vital parameters monitoring. This cross-sectional study was conducted from June 2014 to February 2015 at the cement, city traffic control and power plant control centers. Electrocardiography and electroencephalography data were recorded from forty males during performing their daily working in resting, low mental workload (LMW), high mental workload (HMW) and recovery conditions (each block 5 minutes). The NASA-Task Load Index (TLX) was used to evaluate the subjective workload of the operators. The results showed that increasing MW had a significant effect on the operators subjective responses in two conditions ([1,53] = 216.303, P < 0.001, η2 = 0.803). Also,the Task-MW interaction effect on operators subjective responses was significant (F [3, 53] = 12.628,P < 0.001, η2 = 0.417). Analysis of repeated measures analysis of variance (ANOVA) indicated that increasing mental demands had a significant effect on heart rate, low frequency/high frequency ratio, theta and alpha band activity. The results suggested that when operators' mental demands especially in traffic control and power plant tasks increased, their mental fatigue and stress level increased and their mental health deteriorated. Therefore, it may be necessary to implement an ergonomic program or administrative control to manage mental probably health in these control centers. Furthermore, by evaluating MW, the control center director can organize the human resources for each MW condition to sustain the appropriate performance as well as improve system functions.

  10. Assessment of operators’ mental workload using physiological and subjective measures in cement, city traffic and power plant control centers

    Science.gov (United States)

    Fallahi, Majid; Motamedzade, Majid; Heidarimoghadam, Rashid; Soltanian, Ali Reza; Miyake, Shinji

    2016-01-01

    Background: The present study aimed to evaluate the operators’ mental workload (MW) of cement, city traffic control and power plant control centers using subjective and objective measures during system vital parameters monitoring. Methods: This cross-sectional study was conducted from June 2014 to February 2015 at the cement, city traffic control and power plant control centers. Electrocardiography and electroencephalography data were recorded from forty males during performing their daily working in resting, low mental workload (LMW), high mental workload (HMW) and recovery conditions (each block 5 minutes). The NASA-Task Load Index (TLX) was used to evaluate the subjective workload of the operators. Results: The results showed that increasing MW had a significant effect on the operators subjective responses in two conditions ([1,53] = 216.303, P < 0.001, η2 = 0.803). Also,the Task-MW interaction effect on operators subjective responses was significant (F [3, 53] = 12.628,P < 0.001, η2 = 0.417). Analysis of repeated measures analysis of variance (ANOVA) indicated that increasing mental demands had a significant effect on heart rate, low frequency/high frequency ratio, theta and alpha band activity. Conclusion: The results suggested that when operators’ mental demands especially in traffic control and power plant tasks increased, their mental fatigue and stress level increased and their mental health deteriorated. Therefore, it may be necessary to implement an ergonomic program or administrative control to manage mental probably health in these control centers. Furthermore, by evaluating MW, the control center director can organize the human resources for each MW condition to sustain the appropriate performance as well as improve system functions. PMID:27386425

  11. Impact of an Infection Control Program on the Prevalence of Nosocomial Infections at a Tertiary Care Center in Switzerland

    OpenAIRE

    Ebnöther, Corina; Tanner, Beate; Schmid, Flavia; Rocca, Vittoria La; Heinzer, Ivo; Bregenzer, Thomas

    2017-01-01

    Objective. To study the impact of a multimodal infection control program on the rate of nosocomial infections at a 550-bed tertiary care center. Methods. Before and after the implementation of an infection control program, the rate of nosocomial infection was recorded in time-interval prevalence studies. Hand hygiene compliance was studied before and after the intervention. As a surrogate marker of compliance, the amount of alcohol-based hand rub consumed before the intervention was compared ...

  12. A Cooperative Plan to Establish an Early Childhood Center for the Invention, Demonstration, and Evaluation of Innovative Practices in Early Childhood Education. Final Report.

    Science.gov (United States)

    Irondequoit Central School District 3, Rochester, NY.

    In 1968 an upstate New York School district, acting on behalf of nine school districts, planned and established an Early Childhood Center. This evaluative report of a 2-year demonstration preschool, modeled on the British Infant School, describes the open classroom arrangement and its effect on the center's children, teachers, and student…

  13. Control of the motion of the body's center of mass in relation to the center of pressure during high-heeled gait.

    Science.gov (United States)

    Chien, Hui-Lien; Lu, Tung-Wu; Liu, Ming-Wei

    2013-07-01

    High-heeled shoes are associated with instability and falling, leading to injuries such as fracture and ankle sprain. Knowledge of the motion of the body's center of mass (COM) with respect to the center of pressure (COP) during high-heeled gait may offer insights into the balance control strategies and provide a basis for approaches that minimize the risk of falling and associated adverse effects. The study aimed to investigate the influence of the base and height of the heels on the COM motion in terms of COM-COP inclination angles (IA) and the rate of change of IA (RCIA). Fifteen females who regularly wear high heels walked barefoot and with narrow-heeled shoes with three heel heights (3.9cm, 6.3cm and 7.3cm) while kinematic and ground reaction force data were measured and used to calculate the COM and COP, as well as the temporal-distance parameters. The reduced base of the heels was found to be the primary factor for the reduced normalized walking speed and the reduced frontal IA throughout the gait cycle. This was achieved mainly through the control of the RCIA during double-leg stance (DLS). The heel heights affected mainly the peak RCIA during DLS, which were not big enough to affect the IA. These results suggest young adults adopt a conservative strategy for balance control during narrow-heeled gait. The results will serve as baseline data for future evaluation of patients and/or older adults during narrow-heeled gait with the aim of reducing the risk of falling. Copyright © 2012 Elsevier B.V. All rights reserved.

  14. Final environmental assessment for vegetation control at VHF stations, microwave stations, electrical substations, and pole yards

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-13

    Southwestern Power Adm. operates very high frequency (VHF) and microwave radio stations, electrical substations, and pole yards for electric power transmission throughout AR, MO, and OK. Vegetation growth at the stations must be suppressed for safety of operation and personnel. Southwestern has been using a combination of mechanical/manual and herbicide control for this purpose; Federally- mandated reductions in staff and budgetary resources require Southwestern to evaluate all potentially efficient methods for vegetation control. Three alternatives were examined: no action, mechanical/manual control, and (proposed) a combination of mechanical/manual and herbicide control. Environmental impacts on air and water quality, wetlands, wildlife, endangered species, archaeological and other resources, farmland, human health, transportation, etc. were evaluated.

  15. Innovative Distributed Power Grid Interconnection and Control Systems: Final Report, December 11, 2000 - August 30, 2005

    Energy Technology Data Exchange (ETDEWEB)

    DePodesta, K.; Birlingmair, D.; West, R.

    2006-03-01

    The contract goal was to further advance distributed generation in the marketplace by making installations more cost-effective and compatible with existing systems. This was achieved by developing innovative grid interconnection and control systems.

  16. In-Plane Shielding for CT: Effect of Off-Centering, Automatic Exposure Control and Shield-to-Surface Distance

    Energy Technology Data Exchange (ETDEWEB)

    Kalra, Mannudeep K.; Dang, Pragya; Singh, Sarabjeet; Saini, Sanjay; Shepard, Jo Anne O. [Massachusetts General Hospital, Boston (United States)

    2009-04-15

    To assess effects of off-centering, automatic exposure control, and padding on attenuation values, noise, and radiation dose when using in-plane bismuth-based shields for CT scanning. A 30 cm anthropomorphic chest phantom was scanned on a 64-multidetector CT, with the center of the phantom aligned to the gantry isocenter. Scanning was repeated after placing a bismuth breast shield on the anterior surface with no gap and with 1, 2, and 6 cm of padding between the shield and the phantom surface. The 'shielded' phantom was also scanned with combined modulation and off-centering of the phantom at 2 cm, 4 cm and 6 cm below the gantry isocenter. CT numbers, noise, and surface radiation dose were measured. The data were analyzed using an analysis of variance. The in-plane shield was not associated with any significant increment for the surface dose or CT dose index volume, which was achieved by comparing the radiation dose measured by combined modulation technique to the fixed mAs (p > 0.05). Irrespective of the gap or the surface CT numbers, surface noise increased to a larger extent compared to Hounsfield unit (HU) (0-6 cm, 26-55%) and noise (0-6 cm, 30-40%) in the center. With off-centering, in-plane shielding devices are associated with less dose savings, although dose reduction was still higher than in the absence of shielding (0 cm off-center, 90% dose reduction; 2 cm, 61%) (p < 0.0001). Streak artifacts were noted at 0 cm and 1 cm gaps but not at 2 cm and 6 cm gaps of shielding to the surface distances. In-plane shields are associated with greater image noise, artificially increased attenuation values, and streak artifacts. However, shields reduce radiation dose regardless of the extent of off-centering. Automatic exposure control did not increase radiation dose when using a shield.

  17. Emergency Flight Control Using Only Engine Thrust and Lateral Center-of-Gravity Offset: A First Look

    Science.gov (United States)

    Burcham, Frank W., Jr.; Burken, John; Maine, Trindel A.; Bull, John

    1997-01-01

    Normally, the damage that results in a total loss of the primary flight controls of a jet transport airplane, including all engines on one side, would be catastrophic. In response, NASA Dryden has conceived an emergency flight control system that uses only the thrust of a wing-mounted engine along with a lateral center-of-gravity (CGY) offset from fuel transfer. Initial analysis and simulation studies indicate that such a system works, and recent high-fidelity simulation tests on the MD-11 and B-747 suggest that the system provides enough control for a survivable landing. This paper discusses principles of flight control using only a wing engine thrust and CGY offset, along with the amount of CGY offset capability of some transport airplanes. The paper also presents simulation results of the throttle-only control capability and closed-loop control of ground track using computer-controlled thrust.

  18. Tracking instrument and control for solar concentrators. Final technical report, October 1979-January 1981

    Energy Technology Data Exchange (ETDEWEB)

    Gray, J; Kuhlman, J

    1981-01-31

    The tracker uses a single photo sensor, and a rotating aperature to obtain tracking accuracies better than 1.5 mrads (0.1 degs). Peak signal detection is used to eliminate tracking of false sources, i.e., clouds, etc. A prism is employed to obtain an extended field of view (150 degs axially - 360 degs radially). The tracker digitally measures the Suns displacement angle relative to the concentrator axis, and repositions it incrementally. This arrangement permits the use of low cost non-servo motors. The local controller contains microprocessor based electronics, incorporating digital signal processing. A single controller may be time shared by a maximum of sixteen trackers, providing a high performance, cost effective solar tracking system, suitable for both line and point focus concentrators. An installation may have the local controller programmed as a standalone unit or slaved to a central controller. When used with a central controller, dynamic data monitoring and logging is available, together with the ability to change system modes and parameters, as desired.

  19. Final Technical Report for the Energy Frontier Research Center Understanding Charge Separation and Transfer at Interfaces in Energy Materials (EFRC:CST)

    Energy Technology Data Exchange (ETDEWEB)

    Vanden Bout, David A. [Univ. of Texas, Austin, TX (United States)

    2015-09-14

    Our EFRC was founded with the vision of creating a broadly collaborative and synergistic program that would lead to major breakthroughs in the molecular-level understanding of the critical interfacial charge separation and charge transfer (CST) processes that underpin the function of candidate materials for organic photovoltaic (OPV) and electrical-energy-storage (EES) applications. Research in these energy contexts shares an imposing challenge: How can we understand charge separation and transfer mechanisms in the presence of immense materials complexity that spans multiple length scales? To address this challenge, our 50-member Center undertook a total of 28 coordinated research projects aimed at unraveling the CST mechanisms that occur at interfaces in these nanostructured materials. This rigorous multi-year study of CST interfaces has greatly illuminated our understanding of early-timescale processes (e.g., exciton generation and dissociation dynamics at OPV heterojunctions; control of Li+-ion charging kinetics by surface chemistry) occurring in the immediate vicinity of interfaces. Program outcomes included: training of 72 graduate student and postdoctoral energy researchers at 5 institutions and spanning 7 academic disciplines in science and engineering; publication of 94 peer-reviewed journal articles; and dissemination of research outcomes via 340 conference, poster and other presentations. Major scientific outcomes included: implementation of a hierarchical strategy for understanding the electronic communication mechanisms and ultimate fate of charge carriers in bulk heterojunction OPV materials; systematic investigation of ion-coupled electron transfer processes in model Li-ion battery electrode/electrolyte systems; and the development and implementation of 14 unique technologies and instrumentation capabilities to aid in probing sub-ensemble charge separation and transfer mechanisms.

  20. WTEC panel report on European nuclear instrumentation and controls. Final report

    Energy Technology Data Exchange (ETDEWEB)

    White, J.D.; Lanning, D.D.; Johnson, P.M.H. [eds.] [World Technology Evaluation Center, Baltimore, MD (United States); Shelton, R.D. [World Technology Evaluation Center, Baltimore, MD (United States)

    1991-12-01

    A study of instrumentation and controls (I and C) technology used in nuclear power plants in Europe was conducted by a panel of US specialists. This study plants in Europe was conducted by a panel of US specialists. This study included a review of the literature on the subject, followed by a visit to some of the leading organizations in Europe in the field nuclear I and C. Areas covered are: (1) role of the operator and control room design; (2) transition from analog to digital technology; (3) computerized operator support systems for fault management; (4) control strategies and techniques; (5) Nuclear power plant I and C architecture; (6) instrumentation and (7) computer standards and tools. The finding relate to poor reactions.

  1. Operation and control of large wind turbines and wind farms. Final report

    DEFF Research Database (Denmark)

    Sørensen, Poul Ejnar; Hansen, Anca Daniela; Thomsen, Kenneth

    2005-01-01

    good power quality and limit mechanical loads and life time consumption. The projectdeveloped models for 3 different concepts for wind farms. Two of the concepts use active stall controlled wind turbines, one with AC connection and one with modern HVDC/VSC connection of the wind farm. The third concept...... is based on pitch controlled windturbines using doubly fed induction generators. The models were applied to simulate the behaviour of the wind farm control when they were connected to a strong grid, and some initial simulations were performed to study the behaviour of the wind farms whenit was isolated...... concepts. The potentials of optimising the lifetime/energy production ratio by means of using revised operational strategies for the individual wind turbines are investigated. Different strategies have beensimulated, where the power production is decreased to an optimum when taking loads and actual price...

  2. WTEC panel report on European nuclear instrumentation and controls. Final report

    International Nuclear Information System (INIS)

    White, J.D.; Lanning, D.D.; Beltracchi, L.; Best, F.R.; Easter, J.R.

    1991-12-01

    A study of instrumentation and controls (I and C) technology used in nuclear power plants in Europe was conducted by a panel of American specialists. The study included a review of the literature on the subject, followed by a visit to some of the leading organizations in Europe in the field of nuclear I and C. The findings of the study are presented in the report. The scope is limited to pressurized water reactors in Czechoslovakia, France, Germany, Norway and Russia. Specific topics include: The role of the operator and control room design; the transition from analog to digital technology; computerized operator support systems for fault management; control strategies and techniques; an investigation of nuclear power plant I and C architecture; instrumentation; computer standards and tools. A companion study is JTEC Panel Report on Nuclear Power in Japan (PB90-215724)

  3. Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and their Disposal: Final Act

    International Nuclear Information System (INIS)

    1989-03-01

    The Conference on Plenipotentiaries on the Global Convention on the Control of Transboundary Movements of Hazardous Wastes was convened by the Executive Director of the United Nations Environment Programme (UNEP) pursuant to decision 14/30, adopted by the Governing Council of UNEP on 17 June 1987. The Conference adopted the Global Convention on the Control of Transboundary Movements of Hazardous Wastes and their Disposal. In the 29 articles of this Convention the definitions of hazardous wastes, the scope of the Convention, general obligations of the signatory parties, transboundary waste movement between Parties as well as through states which are not parties, illegal traffic, international control, liabilities, financial aspects, verification, accession and withdrawal of the Parties are defined in detail. There are 6 Annexes, including specifications of hazardous wastes, information requirements, notification rules, etc

  4. Final Technical Report of the project "Controlling Quantum Information by Quantum Correlations"

    Energy Technology Data Exchange (ETDEWEB)

    Girolami, Davide [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-01-17

    The report describes hypotheses, aims, methods and results of the project 20170675PRD2, “Controlling Quantum Information by Quantum Correlations”, which has been run from July 31, 2017 to January 7, 2018. The technical work has been performed by Director’s Fellow Davide Girolami of the T-4 Division, Physics of Condensed Matter and Complex Systems, under the supervision of Wojciech Zurek (T-4), Lukasz Cincio (T-4), and Marcus Daniels (CCS-7). The project ended as Davide Girolami has been converted to J. R. Oppenheimer Fellow to work on the project 20180702PRD1, “Optimal Control of Quantum Machines”, started on January 8, 2018.

  5. Some safety considerations in laser-controlled thermonuclear reactors. Final report

    International Nuclear Information System (INIS)

    Botts, T.E.; Breton, D.; Chan, C.K.; Levy, S.I.; Sehnert, M.; Ullman, A.Z.

    1978-07-01

    A major objective of this study was to identify potential safety questions for laser controlled thermonuclear reactors. From the safety viewpoint, it does not appear that the actual laser controlled thermonuclear reactor conceptual designs present hazards very different than those of magnetically confined fusion reactors. Some aspects seem beneficial, such as small lithium inventories, and the absence of cryogenic devices, while other aspects are new, for example the explosion of pressure vessels and laser hazards themselves. Major aspects considered in this report include: (a) general safety considerations, (b) tritium inventories, (c) system behavior during loss of flow accidents, and (d) safety considerations of laser related penetrations

  6. Final Technical Report: Commercial Advanced Lighting Control (ALC) Demonstration and Deployment

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, Gabe [Efficiency Forward, Inc. / DesignLights Consortium

    2018-02-05

    This three-year demonstration and deployment project sought to address market barriers to accelerating the adoption of Advanced Lighting Controls (ALCs), an underutilized technology with low market penetration. ALCs are defined as networked, addressable lighting control systems that utilize software or intelligent controllers to combine multiple energy-saving lighting control strategies in a single space (e.g., smart-time scheduling, daylight harvesting, task tuning, occupancy control, personal control, variable load-shedding, and plug-load control). The networked intelligent aspect of these systems allows applicable lighting control strategies to be combined in a single space, layered over one another, maximizing overall energy-savings. The project included five real building demonstrations of ALCs across the Northeast US region. The demonstrations provided valuable data and experience to support deployment tasks that are necessary to overcome market barriers. These deployment tasks included development of training resources for building designers, installers, and trades, as well as development of new energy efficiency rebates for the technology from Efficiency Forward’s utility partners. Educating designers, installers, and trades on ALCs is a critical task for reducing the cost of the technology that is currently inflated due to perceived complexity and unfamiliarity with how to design and install the systems. Further, utility and non-utility energy efficiency programs continue to relegate the technology to custom or ill-suited prescriptive program designs that do not effectively deploy the technology at scale. This project developed new, scalable rebate approaches for the technology. Efficiency Forward utilized their DesignLights Consortium® (DLC) brand and network of 81 DLC member utilities to develop and deploy the results of the project. The outputs of the project have included five published case studies, a six-hour ALC technology training curriculum

  7. SOLERAS - Solar Controlled Environment Agriculture Project. Final report, Volume 1. Project summary

    Energy Technology Data Exchange (ETDEWEB)

    1985-12-30

    A summary of the Solar Controlled Environment Agriculture Project is presented. The design of the greenhouses include transparent double pane glass roof with channels for fluid between the panes, inner pane tinted and double pane extruded acrylic aluminized mylar shade and diffuser. Solar energy technologies provide power for water desalination, for pumping irrigation water, and for cooling and heating the controlled environment space so that crops can grow in arid lands. The project is a joint effort between the United States and Saudi Arabia. (BCS)

  8. The World Optical Depth Research and Calibration Center (WORCC) quality assurance and quality control of GAW-PFR AOD measurements

    Science.gov (United States)

    Kazadzis, Stelios; Kouremeti, Natalia; Nyeki, Stephan; Gröbner, Julian; Wehrli, Christoph

    2018-02-01

    The World Optical Depth Research Calibration Center (WORCC) is a section within the World Radiation Center at Physikalisches-Meteorologisches Observatorium (PMOD/WRC), Davos, Switzerland, established after the recommendations of the World Meteorological Organization for calibration of aerosol optical depth (AOD)-related Sun photometers. WORCC is mandated to develop new methods for instrument calibration, to initiate homogenization activities among different AOD networks and to run a network (GAW-PFR) of Sun photometers. In this work we describe the calibration hierarchy and methods used under WORCC and the basic procedures, tests and processing techniques in order to ensure the quality assurance and quality control of the AOD-retrieved data.

  9. Sentinel-3 Mission Performance Center: paving the way of high-quality controlled data

    Science.gov (United States)

    Bruniquel, Jerome; Féménias, Pierre; Goryl, Philippe; Bonekamp, Hans

    2015-04-01

    As part of the Sentinel-3 mission and in order to ensure the highest quality of products, ESA and EUMETSAT set up the Sentinel-3 Mission Performance Centre (S-3 MPC). This facility is part of the Payload Data Ground Segment (PDGS) and aims at controlling the quality of all generated products, from L0 to L2. The S-3 MPC is composed of a Coordinating Centre (CC), where the core infrastructure is hosted, which is in charge of the main routine activities (especially the quality control of data) and the overall service management. Expert Support Laboratories (ESLs) are involved in calibration and validation activities and provide specific assessment of the products (e.g., analysis of trends, ad hoc analysis of anomalies, etc.). The S-3 MPC interacts with the Processing Archiving Centers (PACs) and the marine centre at EUMETSAT. The S-3 MPC service contract is currently carried out by 23-partners consortium led by ACRI-ST, France. The S-3 MPC contract was kick-offed in September 2014 with a first set-up phase of 12 months. After the launch of S3-A (planned before end of 2015), the S-3 MPC will start its second phase to support commissioning activities. Then a routine operation phase of up to 5 years will begin, including the commissioning activities related to S3-B. The main S-3 MPC activities are: - Calibration: to update on-board and on-ground configuration data in order to meet product quality requirements. - Validation: to assess, by independent means with respect to the methods and tools used for calibration, the quality of the generated data products. Validation functions provide feedback to calibration and data processors corrective and perfective maintenance activities. - Verification: to confirm that the specified requirements on a system have been satisfied. - Quality Control: to routinely monitor the status of the sensor and to check if the derived products (Level 0, Level 1 and Level 2) meet the quality requirements along mission lifetime. - Algorithm

  10. Executive summary of the special safeguards study on material control and accounting systems. Final report

    International Nuclear Information System (INIS)

    1975-01-01

    This report assesses the feasibility of real-time systems applied to mixed-oxide fuel rod fabrication. Their interaction with other material control and accounting measures are considered. Economics, effectiveness, and acceptance factors are discussed. A cost-benefit evaluation is made and recommendations given for safeguards improvements

  11. Vehicle Lateral Control Under Fault in Front and/or Rear Sensors: Final Report

    OpenAIRE

    Lu, Guang; Huang, Jihua; Tomizuka, Masayoshi

    2004-01-01

    This report presents the research results of Task Order 4204(TO4204), "Vehicle Lateral Control under Fault in Front and/or Rear Sensors". This project is a continuing effort of the Partners for Advanced Transit and Highways (PATH) on the research of passenger vehicles for Automated Highway Systems (AHS).

  12. Impact of cruise control on traffic safety, energy consumption and environmental pollution : final report

    NARCIS (Netherlands)

    Hoedemaeker, D.M.; Brouwer, R.F.T.; Malone, K.; Klunder, G.; et al

    2006-01-01

    In this subproject, the impact of Cruise Control (CC) was analysed with respect to traffic safety, energy consumption, and environmental pollution. In order to work on this topic from a European perspective, a team of European experts in the fields of driver assistance systems, human factors,

  13. Amphetamines, Barbiturates and Hallucinogens; An Analysis of Use, Distribution, and Control. Final Report.

    Science.gov (United States)

    McGlothlin, William H.

    This report is the third of three monographs to provide perspectives on the use, distribution, and control of illicit drugs. The first, conducted in 1971, described the prevalence, use patterns, sources, distribution, and economics of the marihuana market. The second (1972) estimated the cost, benefits, and potential of approaches to narcotic…

  14. Control of a long reach manipulator with suspension cables for waste storage tank remediation. Final report

    International Nuclear Information System (INIS)

    Wang, S.L.

    1994-01-01

    A long reach manipulator will be used for waste remediation in large underground storage tanks. The manipulator's slenderness makes it flexible and difficult to control. A low-cost and effective method to enhance the manipulator's stiffness is proposed in this research by using suspension cables. These cables can also be used to accurately measure the position of the manipulator's wrist

  15. Final Environmental Assessment of Mosquito Control at Joint Base Charleston - Weapons Station

    Science.gov (United States)

    2011-04-01

    fermentation solids and solubles . 11.6 1% 88.39% 100.00% Other Ingredients ........ ... .. ...... . Total . . . •.......•........ .... Potency...public pes t control programs sponsored by governmental entities): It is not necessary to avoid farm buildings. dairy barns, and feed or forage areas

  16. Integrated computer control system CORBA-based simulator FY98 LDRD project final summary report

    International Nuclear Information System (INIS)

    Bryant, R M; Holloway, F W; Van Arsdall, P J.

    1999-01-01

    The CORBA-based Simulator was a Laboratory Directed Research and Development (LDRD) project that applied simulation techniques to explore critical questions about distributed control architecture. The simulator project used a three-prong approach comprised of a study of object-oriented distribution tools, computer network modeling, and simulation of key control system scenarios. This summary report highlights the findings of the team and provides the architectural context of the study. For the last several years LLNL has been developing the Integrated Computer Control System (ICCS), which is an abstract object-oriented software framework for constructing distributed systems. The framework is capable of implementing large event-driven control systems for mission-critical facilities such as the National Ignition Facility (NIF). Tools developed in this project were applied to the NIF example architecture in order to gain experience with a complex system and derive immediate benefits from this LDRD. The ICCS integrates data acquisition and control hardware with a supervisory system, and reduces the amount of new coding and testing necessary by providing prebuilt components that can be reused and extended to accommodate specific additional requirements. The framework integrates control point hardware with a supervisory system by providing the services needed for distributed control such as database persistence, system start-up and configuration, graphical user interface, status monitoring, event logging, scripting language, alert management, and access control. The design is interoperable among computers of different kinds and provides plug-in software connections by leveraging a common object request brokering architecture (CORBA) to transparently distribute software objects across the network of computers. Because object broker distribution applied to control systems is relatively new and its inherent performance is roughly threefold less than traditional point

  17. Intra-Hour Dispatch and Automatic Generator Control Demonstration with Solar Forecasting - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Coimbra, Carlos F. M. [Univ. of California, San Diego, CA (United States

    2016-02-25

    In this project we address multiple resource integration challenges associated with increasing levels of solar penetration that arise from the variability and uncertainty in solar irradiance. We will model the SMUD service region as its own balancing region, and develop an integrated, real-time operational tool that takes solar-load forecast uncertainties into consideration and commits optimal energy resources and reserves for intra-hour and intra-day decisions. The primary objectives of this effort are to reduce power system operation cost by committing appropriate amount of energy resources and reserves, as well as to provide operators a prediction of the generation fleet’s behavior in real time for realistic PV penetration scenarios. The proposed methodology includes the following steps: clustering analysis on the expected solar variability per region for the SMUD system, Day-ahead (DA) and real-time (RT) load forecasts for the entire service areas, 1-year of intra-hour CPR forecasts for cluster centers, 1-year of smart re-forecasting CPR forecasts in real-time for determination of irreducible errors, and uncertainty quantification for integrated solar-load for both distributed and central stations (selected locations within service region) PV generation.

  18. Addendum to Final Audit Report on Contracting Practices for the Use and Operations of DoD-Sponsored Federally Funded Research and Development Centers

    National Research Council Canada - National Science Library

    1995-01-01

    Inspector General, DoD, Report No. 95-048, "Contracting Practices for the Use and Operations of DoD-Sponsored Federally Funded Research and Development Centers," December 2, 1994, was published without management comments...

  19. Integrated Pest Management Intervention in Child Care Centers Improves Knowledge, Pest Control, and Practices.

    Science.gov (United States)

    Alkon, Abbey; Nouredini, Sahar; Swartz, Alicia; Sutherland, Andrew Mason; Stephens, Michelle; Davidson, Nita A; Rose, Roberta

    To reduce young children's exposure to pests and pesticides, an integrated pest management (IPM) intervention was provided for child care center staff. The 7-month IPM education and consultation intervention was conducted by trained nurse child care health consultants in 44 child care centers in California. IPM knowledge surveys were completed by child care staff, objective IPM assessments were completed by research assistants pre- and postintervention, and activity logs were completed by the nurses. There were significant increases in IPM knowledge for the child care staff who attended workshops. There were reductions in the prevalence of pests and increases in IPM practices at the postintervention compared with the preintervention time point. The nurses consulted an average of 5.4 hours per center. A nurse-led IPM intervention in child care centers can reduce exposure to harmful substances for young children attending child care centers. Copyright © 2016 National Association of Pediatric Nurse Practitioners. Published by Elsevier Inc. All rights reserved.

  20. Development of controlled solid-state alignment for alnico permanent magnets in near-final shape

    Directory of Open Access Journals (Sweden)

    Iver E. Anderson

    2017-05-01

    Full Text Available The 2011 price shock in the rare earth (RE permanent magnet (PM marketplace precipitated realization of extremely poor RE supply diversity and drove renewed research in RE-free permanent magnets such as “alnico.” Essentially, alnico is an Al-Ni-Co-Fe alloy with high magnetic saturation and TC, but low coercivity. It also was last researched extensively in the 1970’s. Currently alnico “9” magnets with the highest energy product (10MGOe are manufactured by directional solidification to make highly aligned anisotropic magnets. This work developed novel powder processing techniques to improve on unaligned anisotropic alnico “8H” with elevated coercivity. Gas atomization was used to produce pre-alloyed powder for binder-assisted compression molding of near-final shape magnets that were vacuum sintered to full density (250g showed reduced overall loop squareness compared to unaligned (equiaxed 8H due to grain rotation-induced misalignment, while low stresses improved squareness and greatly improved alignment compared to equiaxed magnets, with squareness approaching 0.30 and remanence ratio as high as 0.79.

  1. Columbia River System Operation Review final environmental impact statement. Appendix E: Flood control

    International Nuclear Information System (INIS)

    1995-11-01

    The System Operation Review (SOR) is a study and environmental compliance process being used by the three Federal agencies to analyze future operations of the system and river use issues. The goal of the SOR is to achieve a coordinated system operation strategy for the river that better meets the needs of all river users. This technical appendix addresses only the effects of alternative system operating strategies for managing the Columbia River system. The Corps of Engineers, Bonneville Power Administration, and Bureau of Reclamation conducted a scoping process consisting of a series of regionwide public meetings and solicitation of written comments in the summer of 1990. Comments on flood control issues were received from all parts of the Columbia river basin. This appendix includes issues raised in the public scoping process, as well as those brought for consideration by members of the Flood Control Work Group

  2. Marine Tactical Command and Control System (MTACCS) Field Development System-1 (FDS-1) assessment: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Avery, L.W.; Hunt, S.T.; Savage, S.F. (Pacific Northwest Lab., Richland, WA (United States)); McLaughlin, P.D.; Shepdard, A.P.; Worl, J.C. (Battelle Seattle Research Center, WA (United States))

    1992-04-01

    The United State Marine Corps (USMC) is continuing the development and fielding of the Marine Corps Tactical Command and Control System (MTACCS), a system which exists in varying states of development, fielding, or modernization. MTACCS is currently composed of the following components: Tactical Combat Operations System (TCO) for ground command and control (C2), Intelligence Analysis System (IAS) with a Genser terminal connected to a TCO workstation for intelligence C2, Marine Integrated Personnel System (MIPS) and a TCO workstation using the Marine Combat Personnel System (MCPERS) software for personnel C2, Marine Integrated Logistics System (MILOGS) which is composed of the Landing Force Asset Distribution System (LFADS), the Marine Air-Ground Task Force (MAGTF) II, and a TCO terminal using the Marine Combat Logistics System (MCLOG) for logistics C2, Marine Corps Fire Support System (MCFSS) for fire support C2, and Advanced Tactical Air Command Central (ATACC) and the Improved Direct Air Support Central for aviation C2.

  3. An economic analysis of BWR control rod blade management strategies. Final report

    International Nuclear Information System (INIS)

    Welsh, J.

    1995-12-01

    Nuclear power plants have available a number of alternative courses of action that can contribute to the reduction of personnel exposure to radiation. Possible actions at boiling water reactor (BWR) plants include accelerating the replacement of high-cobalt control rod blades (CRB) or the blades' high-cobalt pins and rollers with low or non-cobalt substitutes. To help utilities understand the exposure reduction and the economic costs and benefits associated with management alternatives, such as accelerated replacement of blades, pins and rollers, EPRI has initiated a project called Cost/Benefit Software for Analyses of Radiation Control Measures (RP1935-32). Through this project EPRI will incorporate engineering-economic techniques into a series of analytical tools that will provide useful insights about alternative exposure reduction options. Prototype software has been developed in an Excel worksheet to analyze issues associated with BWR control rod blade management options. The CRB replacement problem framework and analysis methodology incorporated into the software tool will help plant managers consider explicitly key engineering and economic issues that are relevant to exposure reduction decisions. This tool generates results that can help plant managers make decisions that are fiscally wise by showing all the cost and benefit implications associated with a management action under consideration. This report describes the general analytical approach for evaluating exposure reduction alternatives. The methodology used to analyze blade and pin and roller replacement alternatives, and the results of a case study application of the methodology and the software prototype at Commonwealth Edison

  4. Contraceptive Use and the Risk of Ectopic Pregnancy: A Multi-Center Case-Control Study.

    Science.gov (United States)

    Li, Cheng; Zhao, Wei-Hong; Meng, Chun-Xia; Ping, Hua; Qin, Guo-Juan; Cao, Shu-Jun; Xi, Xiaowei; Zhu, Qian; Li, Xiao-Cui; Zhang, Jian

    2014-01-01

    To evaluate the association between the risk of ectopic pregnancy (EP) and the use of common contraceptives during the previous and current conception/menstrual cycle. A multi-center case-control study was conducted in Shanghai. Women diagnosed with EP were recruited as the case group (n = 2,411). Women with intrauterine pregnancy (IUP) (n = 2,416) and non-pregnant women (n = 2,419) were matched as controls at a ratio of 1∶1. Information regarding the previous and current use of contraceptives was collected. Multivariate logistic regression analyses were performed to calculate odds ratios (ORs) and the corresponding 95% confidential intervals (CIs). Previous use of intrauterine devices (IUDs) was associated with a slight risk of ectopic pregnancy (AOR1 = 1.87 [95% CI: 1.48-2.37]; AOR2 = 1.84 [1.49-2.27]), and the risk increased with the duration of previous use (P1 for trend contraceptives reduced the risk of both unwanted IUP (condom: AOR = 0.04 [0.03-0.05]; withdrawal method: AOR = 0.10 [0.07-0.13]; calendar rhythm method: AOR = 0.54 [0.40-0.73]; oral contraceptive pills [OCPs]: AOR = 0.03 [0.02-0.08]; levonorgestrel emergency contraception [LNG-EC]: AOR = 0.22 [0.16-0.30]; IUDs: AOR = 0.01 [0.005-0.012]; tubal sterilization: AOR = 0.01 [0.001-0.022]) and unwanted EP (condom: AOR1 = 0.05 [0.04-0.06]; withdrawal method: AOR1 = 0.13 [0.09-0.19]; calendar rhythm method: AOR1 = 0.66 [0.48-0.91]; OCPs: AOR1 = 0.14 [0.07-0.26]; IUDs: AOR1 = 0.17 [0.13-0.22]; tubal sterilization: AOR1 = 0.04 [0.02-0.08]). However, when contraception failed and pregnancy occurred, current use of OCPs (AOR2 = 4.06 [1.64-10.07]), LNG-EC (AOR2 = 4.87 [3.88-6.10]), IUDs (AOR2 = 21.08 [13.44-33.07]), and tubal sterilization (AOR2 = 7.68 [1.69-34.80]) increased the risk of EP compared with the non-use of contraceptives. Current use of most contraceptives reduce the risk of both IUP and EP. However, if the

  5. Contraceptive Use and the Risk of Ectopic Pregnancy: A Multi-Center Case-Control Study.

    Directory of Open Access Journals (Sweden)

    Cheng Li

    Full Text Available To evaluate the association between the risk of ectopic pregnancy (EP and the use of common contraceptives during the previous and current conception/menstrual cycle.A multi-center case-control study was conducted in Shanghai. Women diagnosed with EP were recruited as the case group (n = 2,411. Women with intrauterine pregnancy (IUP (n = 2,416 and non-pregnant women (n = 2,419 were matched as controls at a ratio of 1∶1. Information regarding the previous and current use of contraceptives was collected. Multivariate logistic regression analyses were performed to calculate odds ratios (ORs and the corresponding 95% confidential intervals (CIs.Previous use of intrauterine devices (IUDs was associated with a slight risk of ectopic pregnancy (AOR1 = 1.87 [95% CI: 1.48-2.37]; AOR2 = 1.84 [1.49-2.27], and the risk increased with the duration of previous use (P1 for trend <10-4, P2 for trend <10-4. The current use of most contraceptives reduced the risk of both unwanted IUP (condom: AOR = 0.04 [0.03-0.05]; withdrawal method: AOR = 0.10 [0.07-0.13]; calendar rhythm method: AOR = 0.54 [0.40-0.73]; oral contraceptive pills [OCPs]: AOR = 0.03 [0.02-0.08]; levonorgestrel emergency contraception [LNG-EC]: AOR = 0.22 [0.16-0.30]; IUDs: AOR = 0.01 [0.005-0.012]; tubal sterilization: AOR = 0.01 [0.001-0.022] and unwanted EP (condom: AOR1 = 0.05 [0.04-0.06]; withdrawal method: AOR1 = 0.13 [0.09-0.19]; calendar rhythm method: AOR1 = 0.66 [0.48-0.91]; OCPs: AOR1 = 0.14 [0.07-0.26]; IUDs: AOR1 = 0.17 [0.13-0.22]; tubal sterilization: AOR1 = 0.04 [0.02-0.08]. However, when contraception failed and pregnancy occurred, current use of OCPs (AOR2 = 4.06 [1.64-10.07], LNG-EC (AOR2 = 4.87 [3.88-6.10], IUDs (AOR2 = 21.08 [13.44-33.07], and tubal sterilization (AOR2 = 7.68 [1.69-34.80] increased the risk of EP compared with the non-use of contraceptives.Current use of most

  6. SERDP ER-1421 Abiotic and Biotic Mechanisms Controlling In Situ Remediation of NDMA: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Szecsody, James E.; McKinley, James P.; Crocker, Fiona H.; Breshears, Andrew T.; Devary, Brooks J.; Fredrickson, Herbert L.; Thompson, Karen T.

    2009-09-30

    This laboratory-scale project was initiated to investigate in situ abiotic/biotic mineralization of NDMA. Under iron-reducing conditions, aquifer sediments showed rapid abiotic NDMA degradation to dimethylamine (DMA), nitrate, formate, and finally, CO2. These are the first reported experiments of abiotic NDMA mineralization. The NDMA reactivity of these different iron phases showed that adsorbed ferrous iron was the dominant reactive phase that promoted NDMA reduction, and other ferrous phases present (siderite, iron sulfide, magnetite, structural ferrous iron in 2:1 clays) did not promote NDMA degradation. In contrast, oxic sediments that were biostimulated with propane promoted biomineralization of NDMA by a cometabolic monooxygenase enzyme process. Other monooxygenase enzyme processes were not stimulated with methane or toluene additions, and acetylene addition did not block mineralization. Although NDMA mineralization extent was the highest in oxic, biostimulated sediments (30 to 82%, compared to 10 to 26% for abiotic mineralization in reduced sediments), large 1-D column studies (high sediment/water ratio of aquifers) showed 5.6 times higher NDMA mineralization rates in reduced sediment (half-life 410 ± 147 h) than oxic biomineralization (half life 2293 ± 1866 h). Sequential reduced/oxic biostimulated sediment mineralization (half-life 3180 ± 1094 h) was also inefficient compared to reduced sediment. These promising laboratory-scale results for NDMA mineralization should be investigated at field scale. Future studies of NDMA remediation should focus on the comparison of this in situ abiotic NDMA mineralization (iron-reducing environments) to ex situ biomineralization, which has been shown successful in other studies.

  7. Human factors review of nuclear power plant control room design. Final report

    International Nuclear Information System (INIS)

    Seminara, J.L.; Gonzalez, W.R.; Parsons, S.O.

    1976-11-01

    The human factors aspects of five representative nuclear power plant control rooms were evaluated using such methods as a checklist guided observation system, structured interviews with operators and trainers, direct observations of operator behavior, task analyses and procedure evaluation, and historical error analyses. The human factors aspects of design practices are illustrated, and many improvements in current practices are suggested. The study recommends that a detailed set of applicable human factors standards be developed to stimulate a uniform and systematic concern for human factors in design considerations

  8. In-Situ Real Time Monitoring and Control of Mold Making and Filling Processes: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Mohamed Abdelrahman; Kenneth Currie

    2010-12-22

    This project presents a model for addressing several objectives envisioned by the metal casting industries through the integration of research and educational components. It provides an innovative approach to introduce technologies for real time characterization of sand molds, lost foam patterns and monitoring of the mold filling process. The technology developed will enable better control over the casting process. It is expected to reduce scrap and variance in the casting quality. A strong educational component is integrated into the research plan to utilize increased awareness of the industry professional, the potential benefits of the developed technology, and the potential benefits of cross cutting technologies.

  9. LANDFILL OPERATION FOR CARBON SEQUESTRATION AND MAXIMUM METHANE EMISSION CONTROL; FINAL

    International Nuclear Information System (INIS)

    Don Augenstein; Ramin Yazdani; Rick Moore; Michelle Byars; Jeff Kieffer; Professor Morton Barlaz; Rinav Mehta

    2000-01-01

    Controlled landfilling is an approach to manage solid waste landfills, so as to rapidly complete methane generation, while maximizing gas capture and minimizing the usual emissions of methane to the atmosphere. With controlled landfilling, methane generation is accelerated to more rapid and earlier completion to full potential by improving conditions (principally moisture, but also temperature) to optimize biological processes occurring within the landfill. Gas is contained through use of surface membrane cover. Gas is captured via porous layers, under the cover, operated at slight vacuum. A field demonstration project has been ongoing under NETL sponsorship for the past several years near Davis, CA. Results have been extremely encouraging. Two major benefits of the technology are reduction of landfill methane emissions to minuscule levels, and the recovery of greater amounts of landfill methane energy in much shorter times, more predictably, than with conventional landfill practice. With the large amount of US landfill methane generated, and greenhouse potency of methane, better landfill methane control can play a substantial role both in reduction of US greenhouse gas emissions and in US renewable energy. The work described in this report, to demonstrate and advance this technology, has used two demonstration-scale cells of size (8000 metric tons[tonnes]), sufficient to replicate many heat and compaction characteristics of larger ''full-scale'' landfills. An enhanced demonstration cell has received moisture supplementation to field capacity. This is the maximum moisture waste can hold while still limiting liquid drainage rate to minimal and safely manageable levels. The enhanced landfill module was compared to a parallel control landfill module receiving no moisture additions. Gas recovery has continued for a period of over 4 years. It is quite encouraging that the enhanced cell methane recovery has been close to 10-fold that experienced with conventional

  10. Optimization of traffic distribution control in software-configurable infrastructure of virtual data center based on a simulation model

    Directory of Open Access Journals (Sweden)

    I. P. Bolodurina

    2017-01-01

    Full Text Available Currently, the proportion of use of cloud computing technology in today's business processes of companies is growing steadily. Despite the fact that it allows you to reduce the cost of ownership and operation of IT infrastructure, there are a number of problems related to the control of data centers. One such problem is the efficiency of the use of available companies compute and network resources. One of the directions of optimization is the process of traffic control of cloud applications and services in data centers. Given the multi-tier architecture of modern data center, this problem does not quite trivial. The advantage of modern virtual infrastructure is the ability to use software-configurable networks and software-configurable data storages. However, existing solutions with algorithmic optimization does not take into account a number of features forming network traffic with multiple classes of applications. Within the framework of the exploration solved the problem of optimizing the distribution of traffic cloud applications and services for the software-controlled virtual data center infrastructure. A simulation model describing the traffic in data center and software-configurable network segments involved in the processing of user requests for applications and services located network environment that includes a heterogeneous cloud platform and software-configurable data storages. The developed model has allowed to implement cloud applications traffic management algorithm and optimize access to the storage system through the effective use of the channel for data transmission. In experimental studies found that the application of the developed algorithm can reduce the response time of cloud applications and services, and as a result improve the performance of processing user requests and to reduce the number of failures.

  11. Mentored peer review of standardized manuscripts as a teaching tool for residents: a pilot randomized controlled multi-center study.

    Science.gov (United States)

    Wong, Victoria S S; Strowd, Roy E; Aragón-García, Rebeca; Moon, Yeseon Park; Ford, Blair; Haut, Sheryl R; Kass, Joseph S; London, Zachary N; Mays, MaryAnn; Milligan, Tracey A; Price, Raymond S; Reynolds, Patrick S; Selwa, Linda M; Spencer, David C; Elkind, Mitchell S V

    2017-01-01

    There is increasing need for peer reviewers as the scientific literature grows. Formal education in biostatistics and research methodology during residency training is lacking. In this pilot study, we addressed these issues by evaluating a novel method of teaching residents about biostatistics and research methodology using peer review of standardized manuscripts. We hypothesized that mentored peer review would improve resident knowledge and perception of these concepts more than non-mentored peer review, while improving review quality. A partially blinded, randomized, controlled multi-center study was performed. Seventy-eight neurology residents from nine US neurology programs were randomized to receive mentoring from a local faculty member or not. Within a year, residents reviewed a baseline manuscript and four subsequent manuscripts, all with introduced errors designed to teach fundamental review concepts. In the mentored group, mentors discussed completed reviews with residents. Primary outcome measure was change in knowledge score between pre- and post-tests, measuring epidemiology and biostatistics knowledge. Secondary outcome measures included level of confidence in the use and interpretation of statistical concepts before and after intervention, and RQI score for baseline and final manuscripts. Sixty-four residents (82%) completed initial review with gradual decline in completion on subsequent reviews. Change in primary outcome, the difference between pre- and post-test knowledge scores, did not differ between mentored (-8.5%) and non-mentored (-13.9%) residents ( p  = 0.48). Significant differences in secondary outcomes (using 5-point Likert scale, 5 = strongly agree) included mentored residents reporting enhanced understanding of research methodology (3.69 vs 2.61; p  = 0.001), understanding of manuscripts (3.73 vs 2.87; p  = 0.006), and application of study results to clinical practice (3.65 vs 2.78; p  = 0.005) compared to non

  12. Controlling the Instructional Development Process. Training Development and Research Center Project Number Fifteen.

    Science.gov (United States)

    Sleezer, Catherine M.; Swanson, Richard A.

    Process control is a way of training managers in business and industry to plan, monitor, and communicate the instructional development process of training projects. Two simple and useful tools that managers use in controlling the process of instructional development are the Process Control Planning Sheet and the Process Control Record. The Process…

  13. Improved control rod drive handling equipment for BWRs [boiling-water reactors]: Final report

    International Nuclear Information System (INIS)

    Turner, A.P.L.; Gorman, J.A.

    1987-08-01

    Improved equipment for removing and replacing control rod drives (CRDs) in BWR plants has been designed, built and tested. Control rod drives must be removed from the reactor periodically for servicing. Removal and replacement of CRDs using equipment originally supplied with the plant has long been recognized as one of the more difficult and highest radiation exposure maintenance operations that must be performed at BWR plants. The improved equipment was used for the first time at Quad Cities, Unit 2, during a Fall 1986 outage. The trial of the equipment was highly successful, and it was shown that the new equipment significantly improves CRD handling operations. The new equipment significantly simplifies the sequence of operations required to lower a CRD from its housing, upend it to a horizontal orientation, and transport it out of the reactor containment. All operations of the new equipment are performed from the undervessel equipment handling platform, thus, eliminating the requirement for a person to work on the lower level of the undervessel gallery which is often highly contaminated. Typically, one less person is required to operate the equipment than were used with the older equipment. The new equipment incorporates a number of redundant and fail safe features that improve operations and reduce the chances for accidents

  14. Advanced Sensing and Control Techniques to Facilitate Semi-Autonomous Decommissioning of Hazardous Sites - Final Report

    International Nuclear Information System (INIS)

    Schalkoff, R.J.

    2000-01-01

    This report summarizes work after 4 years of a 3-year project (no-cost extension of the above-referenced project for a period of 12 months granted). The fourth generation of a vision sensing head for geometric and photometric scene sensing has been built and tested. Estimation algorithms for automatic sensor calibration updating under robot motion have been developed and tested. We have modified the geometry extraction component of the rendering pipeline. Laser scanning now produces highly accurate points on segmented curves. These point-curves are input to a NURBS (non-uniform rational B-spline) skinning procedure to produce interpolating surface segments. The NURBS formulation includes quadrics as a sub-class, thus this formulation allows much greater flexibility without the attendant instability of generating an entire quadric surface. We have also implemented correction for diffuse lighting and specular effects. The QRobot joint level control was extended to a complete semi-autonomous robot control system for D and D operations. The imaging and VR subsystems have been integrated and tested

  15. Coherent control of photoabsorption processes and calculation of nonlinear optical processes. Final technical report

    International Nuclear Information System (INIS)

    Lambropoulos, P.

    1998-01-01

    The work on the grant for the entire period of its duration concentrated on two different but related areas, namely coherent control of photoabsorption processes and the calculation of non linear optical processes with short wavelength radiation. On the first topic, the work dealt with the problem of controlling the population transfer from one to another bound state of a system in a route that passes through a continuum. This question is most important in the context of transferring populations between vibrational states of a molecule through a sequence of two pulses taking the system via the dissociation continuum. On the second topic, their work was motivated by the availability of XUV and soft X-ray coherent radiation sources obtained through high order harmonic generation. In addition, a few other techniques based on schemes of photo-pumped X-ray lasers promise to provide in the near-future similarly coherent sources. It is thus important to have an assessment of the possibility of extending non-linear optical processes to this range of wavelengths. This means assessing the relevant magnitude of the susceptibilities for third harmonic generation, stimulated Raman scattering, two-photon absorption, etc

  16. Advanced Sensing and Control Techniques to Facilitate Semi-Autonomous Decommissioning of Hazardous Sites - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Schalkoff, R.J.

    2000-12-01

    This report summarizes work after 4 years of a 3-year project (no-cost extension of the above-referenced project for a period of 12 months granted). The fourth generation of a vision sensing head for geometric and photometric scene sensing has been built and tested. Estimation algorithms for automatic sensor calibration updating under robot motion have been developed and tested. We have modified the geometry extraction component of the rendering pipeline. Laser scanning now produces highly accurate points on segmented curves. These point-curves are input to a NURBS (non-uniform rational B-spline) skinning procedure to produce interpolating surface segments. The NURBS formulation includes quadrics as a sub-class, thus this formulation allows much greater flexibility without the attendant instability of generating an entire quadric surface. We have also implemented correction for diffuse lighting and specular effects. The QRobot joint level control was extended to a complete semi-autonomous robot control system for D and D operations. The imaging and VR subsystems have been integrated and tested.

  17. Final Report: MaRSPlus Sensor System Electrical Cable Management and Distributed Motor Control Computer Interface

    Science.gov (United States)

    Reil, Robin

    2011-01-01

    The success of JPL's Next Generation Imaging Spectrometer (NGIS) in Earth remote sensing has inspired a follow-on instrument project, the MaRSPlus Sensor System (MSS). One of JPL's responsibilities in the MSS project involves updating the documentation from the previous JPL airborne imagers to provide all the information necessary for an outside customer to operate the instrument independently. As part of this documentation update, I created detailed electrical cabling diagrams to provide JPL technicians with clear and concise build instructions and a database to track the status of cables from order to build to delivery. Simultaneously, a distributed motor control system is being developed for potential use on the proposed 2018 Mars rover mission. This system would significantly reduce the mass necessary for rover motor control, making more mass space available to other important spacecraft systems. The current stage of the project consists of a desktop computer talking to a single "cold box" unit containing the electronics to drive a motor. In order to test the electronics, I developed a graphical user interface (GUI) using MATLAB to allow a user to send simple commands to the cold box and display the responses received in a user-friendly format.

  18. Test and approval center for fuel cell and hydrogen technologies: Phase I. Initiation. Final report; Test- og godkendelsescenter for braendselscelle- og brintteknologier. Fase 1. Opstart. Slutrapport

    Energy Technology Data Exchange (ETDEWEB)

    Hagen, A. [Technical Univ. of Denmark. DTU Energy Conversion, DTU Risoe Campus, Roskilde (Denmark)

    2012-09-15

    The aim of the present project was to initialize a Test and Approval Center for Fuel Cell and Hydrogen Technologies at the sites of the project partners Risoe DTU (Fuel Cells and Solid State Chemistry Division), and DGC (work package 1). The project furthermore included start-up of first activities with focus on the development of accelerated life-time tests of fuel cell systems, preparations for standardization of these methods, and advising in relation to certification and approval of fuel cell systems (work package 2). The main achievements of the project were: Work package 1: 1) A large national and international network was established comprising of important commercial players, research institutions, and other test centers; 2) The test center is known in large part of the international Fuel Cell and Hydrogen community due to substantial efforts in 'marketing'; 3) New national and international projects have been successfully applied for, with significant roles of the test center, which secure the further establishment and development of the center. Work package 2: 1) Testing equipment was installed and commissioned at DTU (Risoe Campus); 2) A comprehensive survey among international players regarding activities on accelerated SOFC testing was carried out; 3) A test procedure for 'compressed' testing of SOFC in relation to {mu} CHP application was developed and used for one-cell stack and 50-cell-stack testing; 4) Guidelines for Danish authority handling were formulated. (Author)

  19. 75 FR 48699 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC...

    Science.gov (United States)

    2010-08-11

    ... a.m.-3:30 p.m., August 24, 2010. Place: Emory Conference Center Hotel, 1615 Clifton Road, N.E... government through the ACD regarding a broad range of human health surveillance issues arising from the...: [email protected] . For security reasons, members of the public interested in attending the meeting should...

  20. Dynamical nuclear polarization using multi-colour control of color centers in diamond

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Pengcheng [Huazhong University of Science and Technology, School of Physics, Wuhan (China); Huazhong University of Science and Technology, Center for Quantum Optical Science, Wuhan (China); Plenio, Martin B. [Universitaet Ulm, Institut fuer Theoretische Physik, Ulm (Germany); Universitaet Ulm, Center for Integrated Quantum Science and Technology, Ulm (Germany); Cai, Jianming [Huazhong University of Science and Technology, School of Physics, Wuhan (China); Huazhong University of Science and Technology, Center for Quantum Optical Science, Wuhan (China); Universitaet Ulm, Institut fuer Theoretische Physik, Ulm (Germany); Universitaet Ulm, Center for Integrated Quantum Science and Technology, Ulm (Germany)

    2016-12-15

    Dynamical nuclear polarization (DNP) transfers the polarization of electron spins at cryogenic temperatures to achieve strong nuclear polarization for applications in nuclear magnetic resonance. Recently introduced approaches employ optical pumping of nitrogen-vacancy (NV) centers in diamond to achieve DNP even at ambient temperatures. In such schemes microwave radiation is used to establish a Hartmann-Hahn condition between the NV electron spin and proximal nuclear spins to facilitate polarization transfer. For a single monochromatic microwave driving field, the Hartmann-Hahn condition cannot be satisfied for an ensemble of NV centers due to inhomogeneous broadening and reduces significantly the overall efficiency of dynamical nuclear polarization using an ensemble of NV centers. Here, we adopt generalized Hartmann-Hahn type dynamical nuclear polarization schemes by applying microwave driving fields with (multiple) time-modulated frequencies. We show that it is possible to enhance the effective coupling between an ensemble of NV center spins with inhomogeneous broadening and nuclear spins, thereby improving significantly the overall efficiency of dynamical nuclear polarization. This approach can also be used to achieve dynamical nuclear polarization of an ensemble of nuclei with a distribution of Larmor frequencies, which would be helpful in magnetic resonance spectroscopy using a single NV spin sensor. (orig.)

  1. Increasing the operational efficiency and safety in operation control centers: the TRANSPETRO experience; Aumentando a seguranca e eficiencia operacional em centros de controle: a experiencia da TRANSPETRO

    Energy Technology Data Exchange (ETDEWEB)

    Felicio, Marco Aurelio Fierro; Frisoli, Caetano [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

    2009-12-19

    The increase in operational efficiency and safety in operation control centers has been traditionally obtained through direct actions in the operational activity itself and on the resources and systems used for that. Modern supervisory and control systems, sophisticated simulation software, cutting-edge last generation equipment and installations, clear and comprehensive procedures definitions and intensive and constant training of the operation teams are, usually, the chosen paths followed by control centers in their incessant quest for increased operational efficiency and safety. This paper presents the path followed by the TRANSPETRO's National Operational Control Center - Natural Gas (Centro Nacional de Controle Operacional - CNCO-Gas) - that has not only focused with the traditional aspects above, but has also made intensive investments in systems and data base integrations, aiming at eliminating data inconsistencies and redundancies and at including automation, standardization and systematization of non-operational and complementary operational activities. These investments allowed TRANSPETRO CNCO-Gas face the big challenge of growing that TRANSPETRO's gas transportation activity is facing now and will be facing in the near future: from 2,600 km to 7,000 km of gas pipelines, and a volume of transported natural gas from 35 MMm{sup 3}/day to 100 MMm{sup 3}/day. (author)

  2. Final Technical Report: Controlled Hydrogen Fleet and Infrastructure Demonstration and Validation Project

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Grasman

    2011-12-31

    This report summarizes the work conducted under U.S. Department of Energy (DOE) under contract DE-FC36-04GO14285 by Mercedes-Benz & Research Development, North America (MBRDNA), Chrysler, Daimler, Mercedes Benz USA (MBUSA), BP, DTE Energy and NextEnergy to validate fuel cell technologies for infrastructure, transportation as well as assess technology and commercial readiness for the market. The Mercedes Team, together with its partners, tested the technology by operating and fueling hydrogen fuel cell vehicles under real world conditions in varying climate, terrain and driving conditions. Vehicle and infrastructure data was collected to monitor the progress toward the hydrogen vehicle and infrastructure performance targets of $2.00 to 3.00/gge hydrogen production cost and 2,000-hour fuel cell durability. Finally, to prepare the public for a hydrogen economy, outreach activities were designed to promote awareness and acceptance of hydrogen technology. DTE, BP and NextEnergy established hydrogen filling stations using multiple technologies for on-site hydrogen generation, storage and dispensing. DTE established a hydrogen station in Southfield, Michigan while NextEnergy and BP worked together to construct one hydrogen station in Detroit. BP constructed another fueling station in Burbank, California and provided a full-time hydrogen trailer at San Francisco, California and a hydrogen station located at Los Angeles International Airport in Southern, California. Stations were operated between 2005 and 2011. The Team deployed 30 Gen I Fuel Cell Vehicles (FCVs) in the beginning of the project. While 28 Gen I F-CELLs used the A-Class platform, the remaining 2 were Sprinter delivery vans. Fuel cell vehicles were operated by external customers for real-world operations in various regions (ecosystems) to capture various driving patterns and climate conditions (hot, moderate and cold). External operators consisted of F-CELL partner organizations in California and Michigan

  3. Instrumentation and control upgrade evaluation methodology. Volume 1: Manual. Final report

    International Nuclear Information System (INIS)

    Bliss, M.; Brown, E.; Florio, F.; Stofko, M.

    1996-07-01

    This methodology manual describes how to develop an Upgrade Evaluation Report (UER) for an I and C system that has been identified as an upgrade candidate in the I and C Life Cycle Management Plan (LCMP). A UER can be developed by a nuclear power plant to determine the cost-effectiveness and feasibility of upgrading an aging or obsolete Instrumentation and Control (I and C) System. A separate UER is developed for each upgrade candidate system. A UER will determine if a given system requires an upgrade or if it is more cost-effective to maintain the present system. If an upgrade is unnecessary, the system will be reclassified as a retained system and a system maintenance plan will be developed for it. This manual is accompanied by a workbook (EPRI TR-104963-V2) which contains various worksheets, outlines, and generic interview questions that aid in the UER development process

  4. Instrumentation and Control Life Cycle Management Plan Methodology. Volume 1, Manual: Final report

    International Nuclear Information System (INIS)

    Quick, D.S.; Murray, S.; Florio, F.; Bliss, M.J.

    1995-08-01

    This methodology manual describes how to develop a Life Cycle Management Plan (LCMP). An LCMP is a long-term strategic plan that can be developed for a nuclear power plant to cost-effectively maintain and upgrade its aging or obsolete Instrumentation and Control (I ampersand C) systems. An LCMP defines the utility's mission and objectives in regards to long range I ampersand C planning, as well as the plant's present configuration (I ampersand C systems, networks, man machine interfaces, etc.), its desired future I ampersand C systems, a long term I ampersand C maintenance strategy, and initial upgrade priorities and schedules to cost-effectively implement system upgrades. This manual is accompanied by a workbook (EPRI TR-105555-V2) which contains various worksheets, outlines, and generic interview questions that aid in the LCNW development process

  5. Experience with the use of programmable logic controllers in nuclear safety applications. Final report

    International Nuclear Information System (INIS)

    Brown, E.M.; Stofko, M.J.

    1995-03-01

    This report describes the implementation and experience with Programmable Logic Controllers (PLC) for nuclear safety applications. Two applications are described. The first is an Anticipated Transient Without Scram (ATWS) mitigation system provided as a Diverse Auxiliary Feedwater Actuation System (DAFAS). It was implemented at Arizona Public Service's Palo Verde Nuclear Generating Station and has been in commercial operation since early 1992. The second system described is an Emergency Diesel Generator Bus Load Sequencer installed at Florida Power and Light's Turkey Point Nuclear Power Plant. This system was installed as part of an upgrade to the emergency power system in 1988. The experience gained in the design, development, implementation and qualification of these systems will be beneficial to utilities that are considering the utilization of PLCs for their plant applications

  6. Quality control in diagnostic mammography: myths, realities and their importance in the final image quality

    International Nuclear Information System (INIS)

    Mora Rodriguez, Patricia

    2011-01-01

    Mammography is the most used tool for early detection of breast cancer and reduce mortality from this cause. Studies with ionizing radiation it is important that be justified and provide a quality image to make the diagnosis, to get more benefits and fewer risks. The problem is the difficult to obtain an image of the breast. Therefore, the commitment to quality mammography is to maximize the contrast, definition, resolution and reliability, thus minimizing noise and dose. A mammogram performed without quality don't detect early breast cancer and the study doesn't have sense. Quality mammography requires trained and experienced staff, modern equipment and in good conditions, correct positioning, right technical factors and appropriate viewing conditions. In addition, quality programs are required to reach to ensure quality, control in testing techniques and image quality. (author) [es

  7. Stability and Control of Burning Tokamak Plasmas with Resistive Walls: Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, George [Univ. of Tulsa, OK (United States); Brennan, Dylan [Princeton Univ., NJ (United States); Cole, Andrew [Columbia Univ., New York, NY (United States); Finn, John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-10-02

    This project is focused on theoretical and computational development for quantitative prediction of the stability and control of the equilibrium state evolution in toroidal burning plasmas, including its interaction with the surrounding resistive wall. The stability of long pulse burning plasmas is highly sensitive to the physics of resonant layers in the plasma, sources of momentum and flow, kinetic effects of energetic particles, and boundary conditions at the wall, including feedback control and error fields. In ITER in particular, the low toroidal flow equilibrium state, sustained primarily by energetic alpha particles from fusion reactions, will require the consideration of all of these key elements to predict quantitatively the stability and evolution. The principal investigators on this project have performed theoretical and computational analyses, guided by analytic modeling, to address this physics in realistic configurations. The overall goal has been to understand the key physics mechanisms that describe stable toroidal burning plasmas under active feedback control. Several relevant achievements have occurred during this project, leading to publications and invited conference presentations. In theoretical efforts, with the physics of the resonant layers, resistive wall, and toroidal momentum transport included, this study has extended from cylindrical resistive plasma - resistive wall models with feedback control to toroidal geometry with strong shaping to study mode coupling effects on the stability. These results have given insight into combined tearing and resistive wall mode behavior in simulations and experiment, while enabling a rapid exploration of plasma parameter space, to identify possible domains of interest for large plasma codes to investigate in more detail. Resonant field amplification and quasilinear torques in the presence of error fields and velocity shear have also been investigated. Here it was found, surprisingly, that the Maxwell

  8. Development of monitoring and control technology based on trace gas monitoring. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Liebowitz, B.

    1997-07-01

    Trace gases are generated by many biological reactions. During anaerobic decomposition, trace levels of hydrogen (H{sub 2}) and carbon monoxide (CO) gases are produced. It was shown previously that these trace gases are intrinsically related to the biochemical reactions occurring and, therefore, offer promise for on-line process monitoring and control. This work was designed to test how effectively hydrogen and CO could be to monitor high-rate anaerobic systems that has significant mass transfer and complex hydraulics. An experimental program was designed to examine the behavior of an upflow anaerobic sludge blanket (UASB) reactor system under steady state and in response to organic loading perturbations. The responses of trace gases CO and H{sub 2} were tracked using an on-line, real-time gas-monitoring system linked to a computer-controlled data acquisition package. Data on conventional process parameters such as pH, chemical oxygen demand (COD), volatile fatty acids (VFAs) were concurrently collected. Monitoring of conventional process indicators (i.e., pH, VFA, gas production) and trace gas (H{sub 2} and CO) indicators was conducted using a matrix of nine different steady-state OLRs (4-23 kg COD/m{sup 3} -d) and system HRTs (0.5 to 2.5 days) was performed to determine any correlation among the indicators. Of OLR, HRT, and influent COD, only OLR had any significant influence on the process indicators examined. All parameters except methane increased with increases in OLR; methane decreased with increased OLR. The OLR and gas production rate (GP) were observed to be linearly correlated.

  9. The CMS Electromagnetic Calorimeter: Results on Crystal Measurements, Quality Control and Data Management in the Rome Regional Center

    CERN Document Server

    Costantini, S

    2004-01-01

    The barrel of the CMS electromagnetic calorimeter is currently under construction and will contain 61200 PbWO4 crystals. Half of them are being fully characterized for dimensions, optical properties and light yield in the INFN-ENEA Regional Center near Rome. We describe the setup of an automatic quality control system for the crystal measurements and the present results on their qualification, as well as the REDACLE project, which has been developed to control and ease the production process. As it will not be possible to precalibrate the whole calorimeter,the crystal measurements and quality checks performed at the Regional Center will be crucial to provide a basis for fast in-situ calibration with particles. REDACLE is at the same time a fast database and a data management system, where the database and the workflow structures are decoupled, in order to obtain the best flexibility.

  10. Current status of quality evaluation of nursing care through director review and reflection from the Nursing Quality Control Centers

    OpenAIRE

    Duan, Xia; Shi, Yan

    2014-01-01

    Background: The quality evaluation of nursing care is a key link in medical quality management. It is important and worth studying for the nursing supervisors to know the disadvantages during the process of quality evaluation of nursing care and then to improve the whole nursing quality. This study was to provide director insight on the current status of quality evaluation of nursing care from Nursing Quality Control Centers (NQCCs). Material and Methods: This qualitative study used a sample ...

  11. End-System Network Interface Controller for 100 Gb/s Wide Area Networks: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Wen, Jesse [Acadia Optronics LLC, Rockville, MD (United States)

    2013-08-30

    In recent years, network bandwidth requirements have scaled multiple folds, pushing the need for the development of data exchange mechanisms at 100 Gb/s and beyond. High performance computing, climate modeling, large-scale storage, and collaborative scientific research are examples of applications that can greatly benefit by leveraging high bandwidth capabilities of the order of 100 Gb/s. Such requirements and advances in IEEE Ethernet standards, Optical Transport Unit4 (OTU4), and host-system interconnects demand a network infrastructure supporting throughput rates of the order of 100 Gb/s with a single wavelength. To address such a demand Acadia Optronics in collaboration with the University of New Mexico, proposed and developed a end-system Network Interface Controller (NIC) for the 100Gbps WANs. Acadia’s 100G NIC employs an FPGA based system with a high-performance processor interconnect (PCIe 3.0) and a high capacity optical transmission link (CXP) to provide data transmission at the rate of 100 Gbps.

  12. Evaluation of spectral shift controlled reactors operating on the uranium fuel cycle. Final report

    International Nuclear Information System (INIS)

    Matzie, R.A.; Sider, F.M.

    1979-08-01

    The performance of the spectral shift controlled reactor (SSCR) operating on uranium fuel cycles was evaluated and compared with the conventional pressurized water reactor (PWR). In order to analyze the SSCR, the PSR design methodology was extended to include systems moderated by mixtures of light water and heavy water and these methods were validated by comparison with experimental results. Once the design methods had been formulated, the resouce requirements and power costs were determined for the uranium-fueled SSCR. The ore requirements of the UO 2 once-through fuel cycle and the UO 2 fuel cycle with self-generated recycle (SGR) of plutonium were found to be 10% and 19% less than those of similarly fueled PWRs, respectively. A fuel cycle optimization study was performed for the UO 2 once-through SSCR and the SGR SSCR. By individually altering lattice parameters, discharge exposure or number of in-core batches, savings of less than 8% in resource requirements and less than 1% in power costs were obtained

  13. Micronized Coal Reburning Demonstration for NOx Control: A DOE Assessment; FINAL

    International Nuclear Information System (INIS)

    National Energy Technology Laboratory

    2001-01-01

    The goal of the U.S. Department of Energy's (DOE) Clean Coal Technology (CCT) program is to furnish the energy marketplace with a number of advanced, more efficient, and environmentally responsible coal utilization technologies through demonstration projects. These projects seek to establish the commercial feasibility of the most promising advanced coal technologies that have developed beyond the proof-of-concept stage. This document serves as a DOE post-project assessment of a project selected in CCT Round IV, the Micronized Coal Reburning (MCR) Demonstration for NO(sub x) Control, as described in a report to Congress (U.S. Department of Energy 1999). The need to meet strict emissions requirements at a minimum cost prompted the Tennessee Valley Authority (TVA), in conjunction with Fuller Company, Energy and Environmental Research Corporation (EER), and Fluor Daniel, to submit the proposal for this project to be sited at TVA's Shawnee Fossil Plant. In July 1992, TVA entered into a cooperative agreement with DOE to conduct the study. However, because of operational and environmental compliance strategy changes, the Shawnee site became unavailable

  14. Size-controlled fluorescent nanodiamonds: A facile method of fabrication and color-center counting

    KAUST Repository

    Mahfouz, Remi; Floyd, Daniel L.; Peng, Wei; Choy, Jennifer; Lončar, Marko; Bakr, Osman

    2013-01-01

    findings suggest that nanocrystal size separation by DGU may be used to control the number of defects per nanocrystal. The efficient approaches described herein to control and quantify DCCs are valuable to researchers as they explore applications for color

  15. Association of Employee Attributes and Exceptional Performance Rating at a National Center of the US Centers for Disease Control and Prevention, 2011.

    Science.gov (United States)

    Roberts, Henry; Myles, Ranell L; Truman, Benedict I; Dean, Hazel D

    2015-01-01

    Employee performance evaluation motivates and rewards exceptional individual performance that advances the achievement of organizational goals. The Centers for Disease Control and Prevention (CDC) and its operating units evaluate employee performance annually and reward exceptional performance with a cash award or quality step increase in pay. A summary performance rating (SPR) of "exceptional" indicated personal achievements in 2011 that were beyond expectations described in the employee's performance plan. To determine whether personal attributes and job setting of civil service employees were associated with an exceptional SPR in National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP) in 2011. Data from the CDC 2011 performance management database collected in 2012 were analyzed in 2013 to identify SPR, personal attributes, and job settings of full-time civil service employees. Multivariate logistic regression controlled for confounding and stratified analysis detected effect modifiers of the association between receiving an exceptional SPR in 2011 and gender, race/ethnicity, education, job location, job series, grade level, years in grade, years of federal service, supervisory role, and NCHHSTP division. Among the 1037 employees, exceptional SPR was independently associated with: female gender (adjusted odds ratio: 1.7 [1.3, 2.3]), advanced degrees (doctorate: 1.7 [1.1, 2.5] master's: [1.1, 2.0]), headquarters location (2.8 [1.9, 4.1]), higher pay grade (3.3 [2.4, 4.5]) and years in grade (0-1 years: 1.7 [1.3, 2.4]; 2-4 years: 1.5 [1.1, 2.0]), division level (Division A: 5.0 [2.5, 9.9]; Division B: 5.5 [3.5, 8.8]), and supervisory status (at a lower-pay grade) (odds ratio: 3.7 [1.1, 11.3]). Exceptional SPR is independently associated with personal employee attributes and job settings that are not modifiable by interventions designed to improve employee performance based on accomplishments.

  16. Role of water quality assessments in hospital infection control: Experience from a new oncology center in eastern India

    Directory of Open Access Journals (Sweden)

    Ramkrishna Bhalchandra

    2014-01-01

    Full Text Available Water quality assessment and timely intervention are essential for health. Microbiology, total dissolved solids (TDS and free residual chlorine were measured for water quality maintenance in an oncology center in India. Impact of these interventions over a period of 22 months has been demonstrated with four cardinal events. Pseudomonas in hospital water was controlled by adequate chlorination, whereas high TDS in the central sterile supply department water was corrected by the installation of electro-deionization plant. Contaminated bottled water was replaced using quality controlled hospital supply. Timely detection and correction of water-related issues, including reverse osmosis plant was possible through multi-faceted approach to water quality.

  17. 78 FR 12621 - Control of Communicable Diseases: Interstate; Scope and Definitions

    Science.gov (United States)

    2013-02-25

    ... Control of Communicable Diseases: Interstate; Scope and Definitions AGENCY: Centers for Disease Control... effective date of Direct Final Rule. SUMMARY: The Centers for Disease Control and Prevention (CDC) within... Disease [[Page 12622

  18. Investigation of the Process for Registration of Squoxin for Squawfish Control, Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Rulifson, Robert L.

    1984-12-01

    Squawfish are a predator on downstream migrant salmon and steelhead. Squoxin, 1,1'-methylenedi-2-naphthol, is a specific toxin for squawfish. This report addresses the requirements and deficiencies in data necessary for squoxin registration as a pesticide. It includes an annotated bibliography, keyword index from published and unpublished sources covering information on squawfish, squoxin, state and federal regulations for pesticide registration. Squoxin is 100% lethal to squawfish at concentrations as low as 10 ppB for at least 2 hours. The recommended rate for field application is 100 ppB for 12 hours. At 100 ppB, the maximum LC/sub 0/ for the least squoxin tolerant salmonids is 7 to 17 times greater than the minimum LC/sub 100/ for northern squawfish. Squoxin is excreted in aquatic biota and mammals primarily via the bile. Squoxin shows little tendency to accumulate in animal tissues. A petition to register squoxin was submitted to EPA in 1977. EPA noted deficiencies in data including testing for residues in meat, milk, poultry, eggs, potable water, and irrigated crops; aquatic metabolism; mutagenicity; avian oral LC/sub 50/; acute LD/sub 50/ for freshwater invertebrates; freshwater fish LC/sub 50/; and acute LC/sub 50/ for marine organisms. Cost estimates for conducting the squoxin data research range from $436,600 to $2,070,000. Squawfish control with squoxin would represent an annual savings to the commercial and sports fishing industry of $20 to 25 million based on the value of the Columbia River salmon and steelhead lost to predation. The cost for registration of squoxin and initial treatment of the Columbia is far less than the value of returning adults from the smolts lost to predation in one year. 7 figs., 13 tabs.

  19. Integrated Dry NOx/SO2 Emissions Control System, A DOE Assessment; FINAL

    International Nuclear Information System (INIS)

    National Energy Technology Laboratory

    2001-01-01

    The goal of the U.S. Department of Energy's (DOE) Clean Coal Technology (CCT) Program is to furnish the energy marketplace with a number of advanced, more efficient, and environmentally responsible coal utilization technologies through demonstration projects. These projects seek to establish the commercial feasibility of the most promising advanced coal technologies that have developed beyond the proof-of-concept stage. This document serves as a DOE post-project assessment (PPA) of a project selected in CCT Round III, the Integrated Dry NO(sub x)/SO(sub 2) Emissions Control System (IDECS), as described in a Report to Congress (U.S. Department of Energy 1991). The desire to reduce emissions of nitrogen oxides (NO, nitric oxide, and NO(sub 2), nitrogen dioxide, collectively referred to as NO(sub x)) and sulfur dioxide (SO(sub 2)) by up to 70 percent at a minimum capital expenditure, while limiting waste production to dry solids that can be handled by conventional ash-removal equipment, prompted Public Service Company of Colorado (PSCC) to submit the proposal for the IDECS project. In March 1991, PSCC entered into a cooperative agreement with DOE to conduct the study. The project was sited at PSCC's Arapahoe Steam Electric Generating Station in Denver, Colorado. The purpose of this CCT project was to demonstrate the reduction of NO(sub x) and SO(sub 2) emissions by installing a combination of existing and emerging technologies, which were expected to work synergistically to reduce emissions. The technologies were low-NO(sub x) burners (LNBS), overfire air (OFA), and selective noncatalytic reduction (SNCR) for NO(sub x) reduction; and dry sorbent injection (DSI), both with and without flue-gas humidification (FGH), for SO(sub 2) reduction. DOE provided 50 percent of the total project funding of$26.2 million

  20. A single residue controls electron transfer gating in photosynthetic reaction centers

    Czech Academy of Sciences Publication Activity Database

    Shlyk, O.; Samish, I.; Matěnová, M.; Dulebo, A.; Poláková, H.; Kaftan, David; Scherz, A.

    2017-01-01

    Roč. 7, MAR 16 (2017), s. 1-13, č. článku 44580. ISSN 2045-2322 R&D Projects: GA ČR GA15-00703S; GA MŠk(CZ) LO1416 Institutional support: RVO:61388971 Keywords : BACTERIAL REACTION CENTERS * INDUCED STRUCTURAL-CHANGES * ATOMIC-FORCE MICROSCOPE Subject RIV: EE - Microbiology, Virology OBOR OECD: Microbiology Impact factor: 4.259, year: 2016

  1. Medicare program; update of ratesetting methodology, payment rates, payment policies, and the list of covered procedures for ambulatory surgical centers effective October 1, 1998; reopening of comment period and delay in adoption of the proposed rule as final--HCFA. Notice of reopening of comment period for proposed rule and delay in adoption of provisions of the proposed rule as final.

    Science.gov (United States)

    1998-10-01

    This notice reopens the comment period for a proposed rule affecting Medicare payments to ambulatory surgical centers (ASCs) that was originally published in the Federal Register on June 12, 1998 (63 FR 32290). This document gives notice of a delay in the adoption of the provisions of the June 12, 1998 ASC proposed rule as a final rule to be concurrent with the adoption as final of the hospital outpatient prospective payment system (PPS) that is the subject of a proposed rule published in the Federal Register on September 8, 1998 (63 FR 47551). In addition this document confirms that the current ASC payment rates that are effective for services furnished on or after October 1, 1998, will remain in effect until rebased ASC rates and the provisions of the June 12, 1998 ASC proposed rule are adopted as final to be concurrent with the adoption as final of the Medicare hospital PPS.

  2. Re-centering variable friction device for vibration control of structures subjected to near-field earthquakes

    Science.gov (United States)

    Ozbulut, Osman E.; Hurlebaus, Stefan

    2011-11-01

    This paper proposes a re-centering variable friction device (RVFD) for control of civil structures subjected to near-field earthquakes. The proposed hybrid device has two sub-components. The first sub-component of this hybrid device consists of shape memory alloy (SMA) wires that exhibit a unique hysteretic behavior and full recovery following post-transformation deformations. The second sub-component of the hybrid device consists of variable friction damper (VFD) that can be intelligently controlled for adaptive semi-active behavior via modulation of its voltage level. In general, installed SMA devices have the ability to re-center structures at the end of the motion and VFDs can increase the energy dissipation capacity of structures. The full realization of these devices into a singular, hybrid form which complements the performance of each device is investigated in this study. A neuro-fuzzy model is used to capture rate- and temperature-dependent nonlinear behavior of the SMA components of the hybrid device. An optimal fuzzy logic controller (FLC) is developed to modulate voltage level of VFDs for favorable performance in a RVFD hybrid application. To obtain optimal controllers for concurrent mitigation of displacement and acceleration responses, tuning of governing fuzzy rules is conducted by a multi-objective heuristic optimization. Then, numerical simulation of a multi-story building is conducted to evaluate the performance of the hybrid device. Results show that a re-centering variable friction device modulated with a fuzzy logic control strategy can effectively reduce structural deformations without increasing acceleration response during near-field earthquakes.

  3. Schedules of Controlled Substances: Placement of UR-144, XLR11, and AKB48 into Schedule I. Final rule.

    Science.gov (United States)

    2016-05-11

    With the issuance of this final rule, the Drug Enforcement Administration places (1-pentyl-1H-indol-3-yl)(2,2,3,3-tetramethylcyclopropyl)methanone (UR-144), [1-(5-fluoro-pentyl)-1H-indol-3-yl](2,2,3,3-tetramethylcyclopropyl)methanone (5-fluoro-UR-144, XLR11), and N-(1-adamantyl)-1-pentyl-1H-indazole-3-carboxamide (APINACA, AKB48), including their salts, isomers, and salts of isomers whenever the existence of such salts, isomers, and salts of isomers is possible, into schedule I of the Controlled Substances Act. This scheduling action is pursuant to the Controlled Substances Act which requires that such actions be made on the record after opportunity for a hearing through formal rulemaking. This action imposes the regulatory controls and administrative, civil, and criminal sanctions applicable to schedule I controlled substances on persons who handle (manufacture, distribute, reverse distribute, import, export, engage in research, conduct instructional activities or chemical analysis, or possess), or propose to handle UR-144, XLR11, or AKB48.

  4. Control of Database Applications at the Defense Finance and Accounting Service Indianapolis Center

    National Research Council Canada - National Science Library

    1997-01-01

    The Defense Finance and Accounting Service Financial Systems Organization, under the control of the Deputy Director for Information Management, Defense Finance and Accounting Service, is responsible...

  5. High Performance, Robust Control of Flexible Space Structures: MSFC Center Director's Discretionary Fund

    Science.gov (United States)

    Whorton, M. S.

    1998-01-01

    Many spacecraft systems have ambitious objectives that place stringent requirements on control systems. Achievable performance is often limited because of difficulty of obtaining accurate models for flexible space structures. To achieve sufficiently high performance to accomplish mission objectives may require the ability to refine the control design model based on closed-loop test data and tune the controller based on the refined model. A control system design procedure is developed based on mixed H2/H(infinity) optimization to synthesize a set of controllers explicitly trading between nominal performance and robust stability. A homotopy algorithm is presented which generates a trajectory of gains that may be implemented to determine maximum achievable performance for a given model error bound. Examples show that a better balance between robustness and performance is obtained using the mixed H2/H(infinity) design method than either H2 or mu-synthesis control design. A second contribution is a new procedure for closed-loop system identification which refines parameters of a control design model in a canonical realization. Examples demonstrate convergence of the parameter estimation and improved performance realized by using the refined model for controller redesign. These developments result in an effective mechanism for achieving high-performance control of flexible space structures.

  6. Quality control of pediatric chest X-rays in diagnostic centers with and without pediatric competence

    International Nuclear Information System (INIS)

    Alt, C.D.; Engelmann, D.; Schenk, J.P.; Troeger, J.

    2006-01-01

    Purpose: Radiation protection in pediatric radiology is very important because of the particular sensitivity of radiosensitive organs in younger patients. Optimized image quality supports radiation protection and should be targeted. In our study we examined the quality of pediatric chest X-rays at diagnostic centers (university hospitals and other large clinics). We then evaluated differences in image quality in departments without pediatric competence (R) and departments with pediatric competence (PR). Materials and Methods: Our study was based on 313 conventional chest X-rays from 207 patients (192 p.a./a.p. and 121 lateral, 43 from R, 258 from PR and 12 neither from R nor KR) and 38 digital chest X-rays from 26 patients (25 p.a./a.p. and 13 lateral, 1 from R and 37 from PR). All patients (age 0 - 18 years) are from Nephroblastoma-Study SIOP-93/01-GPOH. We examined all initial chest X-rays, which were sent to us for evaluation upon request between 4/3/2002 and 6/14/2002. The examined parameters were: exposure, centering of the X-rays/patient positioning, collimation and sharpness. The X-rays were evaluated on a scale from 1 (best result) to 5 (worst result), resulting in an overall score of A = optimum, B = minor problems, C = major problems, or D = unusable. The optical density, the center of the image and the relative field size were also measured. Statistical tests (Mann-Whitney-U and log regression) were carried out on the conventional images. The study was performed retrospectively. The exposure, sharpness and optical density of the digital X-rays were not analyzed. Results: In the case of all conventional X-rays, the quality of the centering of the X-rays/patient positioning and collimation was moderate (average scale value: 2.4 and 2.8), and the quality of the exposure and sharpness was good and very good (average scale value: 1.9 and 1.5). The quality of the chest X-rays in departments with additional pediatric radiological expertise was better mainly in

  7. The releases control and the environment survey of the Cea Centers

    International Nuclear Information System (INIS)

    2002-01-01

    The Cea sets the environment protection in the heart of its security policy, which is based on the mastership of risks resulting from the researches activities and installations development. This policy aims to reduce as small as possible compared with the technical and economical necessities, the impact of its activities on the human and the environment. This document, takes stock for the year 2002, of the liquid and gas radioactive effluents releases as also of the radioactivity level around the Cea Centers, by a systematic monitoring of the atmosphere, the waters, the vegetation and the milk. (A.L.B.)

  8. New process modeling[sic], design, and control strategies for energy efficiency, high product quality, and improved productivity in the process industries. Final project report; FINAL

    International Nuclear Information System (INIS)

    Ray, W. Harmon

    2002-01-01

    This project was concerned with the development of process design and control strategies for improving energy efficiency, product quality, and productivity in the process industries. In particular, (i) the resilient design and control of chemical reactors, and (ii) the operation of complex processing systems, was investigated. Specific topics studied included new process modeling procedures, nonlinear controller designs, and control strategies for multiunit integrated processes. Both fundamental and immediately applicable results were obtained. The new design and operation results from this project were incorporated into computer-aided design software and disseminated to industry. The principles and design procedures have found their way into industrial practice

  9. Inventory management and control at the central distribution center for Univar Products International B.V.

    NARCIS (Netherlands)

    Pholnukulkit, Pimara

    2008-01-01

    This report presents the outcome of the Logistics Design Project carried out for Univar Products International B.V. The goal of this project is to design an inventory control system and implement an inventory control tool that supports decisions in managing inventory of all products in the central

  10. Schedules of controlled substances: extension of temporary placement of UR-144, XLR11, and AKB48 in schedule I of the Controlled Substances Act. Final order.

    Science.gov (United States)

    2015-05-15

    The Administrator of the Drug Enforcement Administration (DEA) is issuing this final order to extend the temporary placement of (1-pentyl-1H-indol-3-yl)(2,2,3,3-tetramethylcyclopropyl)methanone (UR-144), [1-(5-fluoro-pentyl)-1H-indol-3-yl](2,2,3,3-tetramethylcyclopropyl)methanone (5-fluoro-UR-144, XLR11) and N-(1-adamantyl)-1-pentyl-1H-indazole-3-carboxamide (APINACA, AKB48), including their salts, isomers, and salts of isomers whenever the existence of such salts, isomers, and salts of isomers is possible, in schedule I of the Controlled Substances Act. The current final order temporarily placing UR-144, XLR11, and AKB48 in schedule I is due to expire on May 15, 2015. This final order will extend the temporary scheduling of UR-144, XLR11, and AKB48 to May 15, 2016, or until the permanent scheduling action for these three substances is completed, whichever occurs first.

  11. Patient-centered disease management (PCDM) for heart failure: study protocol for a randomised controlled trial.

    Science.gov (United States)

    Bekelman, David B; Plomondon, Mary E; Sullivan, Mark D; Nelson, Karin; Hattler, Brack; McBryde, Connor; Lehmann, Kenneth G; Potfay, Jonathan; Heidenreich, Paul; Rumsfeld, John S

    2013-07-09

    Chronic heart failure (HF) disease management programs have reported inconsistent results and have not included comorbid depression management or specifically focused on improving patient-reported outcomes. The Patient Centered Disease Management (PCDM) trial was designed to test the effectiveness of collaborative care disease management in improving health status (symptoms, functioning, and quality of life) in patients with HF who reported poor HF-specific health status. Patients with a HF diagnosis at four VA Medical Centers were identified through population-based sampling. Patients with a Kansas City Cardiomyopathy Questionnaire (KCCQ, a measure of HF-specific health status) score of patients were randomized to receive usual care or the PCDM intervention, which included: (1) collaborative care management by VA clinicians including a nurse, cardiologist, internist, and psychiatrist, who worked with patients and their primary care providers to provide guideline-concordant care management, (2) home telemonitoring and guided patient self-management support, and (3) screening and treatment for comorbid depression. The primary study outcome is change in overall KCCQ score. Secondary outcomes include depression, medication adherence, guideline-based care, hospitalizations, and mortality. The PCDM trial builds on previous studies of HF disease management by prioritizing patient health status, implementing a collaborative care model of health care delivery, and addressing depression, a key barrier to optimal disease management. The study has been designed as an 'effectiveness trial' to support broader implementation in the healthcare system if it is successful. Unique identifier: NCT00461513.

  12. Quality control in Department of Nuclear Medicine, Clinical Center Banja Luka, RS, Bosnia and Herzegovina

    International Nuclear Information System (INIS)

    Goran Vuleta

    2007-01-01

    Complete test of publication follows. The aim of this work is to give a review of situations in the Department of Nuclear Medicine in Banja Luka related to quality control. We must perform daily, weekly and monthly control of equipment in the Department of Nuclear Medicine, and we must keep records. In our Department we have equipment from different producers and different year of production: 3 gamma cameras (1973, 1989, 2000); 2 auto gamma counters (2000, 2006); 2 dose calibrators (1973, 2000); 1 thyroid uptake system (2000). Normally procedures for quality control are also different. The situation, according to results of quality control is good. All equipment is working normally and with good performance (except one gamma camera - a problem with hard drive), but we don't have a routine daily control and periodical control for others tests. Keeping a records is another problem. Why? 1. In Bosnia and Herzegovina we don't have Regulatory authority. That means that we don't have legislation, rules, inspection or any other regulatory instruments. 2. There is only school for nurses, we have no special school for medical technician. So, we need an education in that field. 3. Very small number of physicist in hospital, no education for medical and nuclear medicine physicist. Conclusion. Situation in Department of Nuclear Medicine in Banja Luka related to quality control is on the medium level. We are trying to put that on the higher level, but to accomplish that we need additional education for nurses (technicians) and physicist.

  13. Coping strategies and locus of control in childhood leukemia: a multi-center research

    Directory of Open Access Journals (Sweden)

    Concetta Polizzi

    2015-06-01

    Full Text Available Acute lymphoblastic leukemia (ALL is a very distressing experience for children and requires a special effort of adjustment. Therefore, it seems to be crucial to explore coping resources for the experienced risk condition. In this sense, the study focuses on coping strategies and locus of control in children with ALL during the treatment phase, and on their possible relation. The correlation between children and maternal coping strategies is also investigated. The participants involved were an experimental group of 40 children with ALL and their mothers, and 30 healthy children as the control group. The tools used were: the Child Behavioral Style Scale and the Monitor-Blunter Style Scale to assess the coping strategies of children and mothers; the locus of Control Scale for Children to analyze the children’s perception of controlling the events. Both children with ALL and their mothers resorted to monitoring coping strategies with a statistically significant rate of occurrence (children: M=17.8, SD=3.8; mothers: M=10.48, SD=3.4. The data concerning the locus of control show this tendency towards internal causes (M=53.1, SD=4.7. There were statistically significant correlations between monitoring coping strategies and external locus of control (r=0.400, P<0.05. The results gained from the control group are almost equivalent. The outcomes show several interesting resources of the psychological functioning of children as well as of their mothers.

  14. Cooperative Mmonitoring Center Occasional Paper/5: Propspects of Conventional Arms Control in South Asia

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, Amit; Kamal, Nazir

    1998-11-01

    The intensely adversarial relationship between India and Pakistan is marked by military rivalry, mutual distrust, and suspicion. The most dividing disagreement has been over the Kashmir region. An inability to discuss the Kashmir issue has prevented discussion on other important issues. Since there is little prospect of detente, at least in the near-term, the question is whether this rivalry can be contained by other means, such as arms control approaches. Conventional arms control has been applied flexibly and successfully in some regions to reduce threat-perceptions and achieve reassuring military stability. Some lessons from other international models might be applied to the India/Pakistan context. This paper discusses the status of conventional arms control in South Asia, the dominant Indian and Pakistani perceptions about arms control, the benefits that could be derived from arms control, as well as the problems and prospects of arms control. It also discusses existing conventional arms control agreements at the regional and global levels as well as the potential role of cooperative monitoring technology.

  15. Study of On-Ramp PI Controller Based on Dural Group QPSO with Different Well Centers Algorithm

    Directory of Open Access Journals (Sweden)

    Tao Wu

    2015-01-01

    Full Text Available A novel quantum-behaved particle swarm optimization (QPSO algorithm, dual-group QPSO with different well centers (DWC-QPSO algorithm, is proposed by constructing the master-slave subswarms. The new algorithm was applied in the parameter optimization of on-ramp traffic PI controller combining with nonlinear feedback theory. With the critical information contained in the searching space and results of the basic QPSO algorithm, this algorithm avoids the rapid disappearance of swarm diversity and enhances the global searching ability through collaboration between subswarms. Experiment results on an on-ramp traffic control simulation show that DWC-QPSO can be well applied in the study of on-ramp traffic PI controller and the comparison results illustrate that DWC-QPSO outperforms other evolutionary algorithms with enhancement in both adaptability and stability.

  16. NCC simulation model. Phase 2: Simulating the operations of the Network Control Center and NCC message manual

    Science.gov (United States)

    Benjamin, Norman M.; Gill, Tepper; Charles, Mary

    1994-01-01

    The network control center (NCC) provides scheduling, monitoring, and control of services to the NASA space network. The space network provides tracking and data acquisition services to many low-earth orbiting spacecraft. This report describes the second phase in the development of simulation models for the FCC. Phase one concentrated on the computer systems and interconnecting network.Phase two focuses on the implementation of the network message dialogs and the resources controlled by the NCC. Performance measures were developed along with selected indicators of the NCC's operational effectiveness.The NCC performance indicators were defined in terms of the following: (1) transfer rate, (2) network delay, (3) channel establishment time, (4) line turn around time, (5) availability, (6) reliability, (7) accuracy, (8) maintainability, and (9) security. An NCC internal and external message manual is appended to this report.

  17. National Wind Technology Center Site Environmental Assessment: Bird and Bat Use and Fatalities -- Final Report; Period of Performance: April 23, 2001 -- December 31, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, E.; Piaggio, A. J.; Bock, C. E.; Armstrong, D. M.

    2003-01-01

    This study was conducted to ascertain actual and potential impacts of wind turbines on populations of birds and bats at the National Wind Technology Center (NWTC) in northern Jefferson County, Colorado. The NWTC, which is part of the U.S. Department of Energy's National Renewable Energy Laboratory (NREL), is located on a mesa dominated by ungrazed grassland with isolated patches of ponderosa pine. Similar lands to the north and west are part of the city of Boulders open space system. Areas to the east and south are part of the Rocky Flats Environmental Technology Site.

  18. How exciton-vibrational coherences control charge separation in the photosystem II reaction center.

    Science.gov (United States)

    Novoderezhkin, Vladimir I; Romero, Elisabet; van Grondelle, Rienk

    2015-12-14

    In photosynthesis absorbed sun light produces collective excitations (excitons) that form a coherent superposition of electronic and vibrational states of the individual pigments. Two-dimensional (2D) electronic spectroscopy allows a visualization of how these coherences are involved in the primary processes of energy and charge transfer. Based on quantitative modeling we identify the exciton-vibrational coherences observed in 2D photon echo of the photosystem II reaction center (PSII-RC). We find that the vibrations resonant with the exciton splittings can modify the delocalization of the exciton states and produce additional states, thus promoting directed energy transfer and allowing a switch between the two charge separation pathways. We conclude that the coincidence of the frequencies of the most intense vibrations with the splittings within the manifold of exciton and charge-transfer states in the PSII-RC is not occurring by chance, but reflects a fundamental principle of how energy conversion in photosynthesis was optimized.

  19. Comparison of radiation doses obtained for radiation monitoring of controlled areas with radiation doses obtained for personnel dosimetry in radiodiagnosis centers

    International Nuclear Information System (INIS)

    Lescano, Roberto; Caspani, Carlos; Universidad Nacional del Litoral, Santa Fe

    2001-01-01

    In this paper we propose to search an indicator that shows, at an objective way, the quality of the radioprotection actions. The method is about to determine doses, measured in the work area, connecting them with the workload, and finally get the dose for the center. Them we make a comparison with the personal film dosimetry data. We discuss the final results, evaluating the radioprotection conditions in daily work. (author)

  20. Reactor control system upgrade for the McClellan Nuclear Radiation Center Sacramento, CA

    International Nuclear Information System (INIS)

    Power, M. A.

    1999-01-01

    Argonne National Laboratory is currently developing a new reactor control system for the McClellan Nuclear Radiation Facility. This new control system not only provides the same functionality as the existing control system in terms of graphic displays of reactor process variables, data archival capability, and manual, automatic, pulse and square-wave modes of operation, but adds to the functionality of the previous control system by incorporating signal processing algorithms for the validation of sensors and automatic calibration and verification of control rod worth curves. With the inclusion of these automated features, the intent of this control system is not to replace the operator but to make the process of controlling the reactor easier and safer for the operator. For instance, an automatic control rod calibration method reduces the amount of time to calibrate control rods from days to minutes, increasing overall reactor utilization. The control rod calibration curve, determined using the automatic calibration system, can be validated anytime after the calibration, as long as the reactor power is between 50W and 500W. This is done by banking all of the rods simultaneously and comparing the tabulated rod worth curves with a reactivity computer estimate. As long as the deviation between the tabulated values and the reactivity estimate is within a prescribed error band, then the system is in calibration. In order to minimize the amount of information displayed, only the essential flux-related data are displayed in graphical format on the control screen. Information from the sensor validation methods is communicated to the operators via messages, which appear in a message window. The messages inform the operators that the actual process variables do not correlate within the allowed uncertainty in the reactor system. These warnings, however, cannot cause the reactor to shutdown automatically. The reactor operator has the ultimate responsibility of using this

  1. Control Systems Security Center Comparison Study of Industrial Control System Standards against the Control Systems Protection Framework Cyber-Security Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans

    2005-09-01

    Cyber security standards, guidelines, and best practices for control systems are critical requirements that have been delineated and formally recognized by industry and government entities. Cyber security standards provide a common language within the industrial control system community, both national and international, to facilitate understanding of security awareness issues but, ultimately, they are intended to strengthen cyber security for control systems. This study and the preliminary findings outlined in this report are an initial attempt by the Control Systems Security Center (CSSC) Standard Awareness Team to better understand how existing and emerging industry standards, guidelines, and best practices address cyber security for industrial control systems. The Standard Awareness Team comprised subject matter experts in control systems and cyber security technologies and standards from several Department of Energy (DOE) National Laboratories, including Argonne National Laboratory, Idaho National Laboratory, Pacific Northwest National Laboratory, and Sandia National Laboratories. This study was conducted in two parts: a standard identification effort and a comparison analysis effort. During the standard identification effort, the Standard Awareness Team conducted a comprehensive open-source survey of existing control systems security standards, regulations, and guidelines in several of the critical infrastructure (CI) sectors, including the telecommunication, water, chemical, energy (electric power, petroleum and oil, natural gas), and transportation--rail sectors and sub-sectors. During the comparison analysis effort, the team compared the requirements contained in selected, identified, industry standards with the cyber security requirements in ''Cyber Security Protection Framework'', Version 0.9 (hereafter referred to as the ''Framework''). For each of the seven sector/sub-sectors listed above, one standard was

  2. Association between microcephaly, Zika virus infection, and other risk factors in Brazil: final report of a case-control study.

    Science.gov (United States)

    de Araújo, Thalia Velho Barreto; Ximenes, Ricardo Arraes de Alencar; Miranda-Filho, Demócrito de Barros; Souza, Wayner Vieira; Montarroyos, Ulisses Ramos; de Melo, Ana Paula Lopes; Valongueiro, Sandra; de Albuquerque, Maria de Fátima Pessoa Militão; Braga, Cynthia; Filho, Sinval Pinto Brandão; Cordeiro, Marli Tenório; Vazquez, Enrique; Cruz, Danielle di Cavalcanti Souza; Henriques, Claudio Maierovitch Pessanha; Bezerra, Luciana Caroline Albuquerque; Castanha, Priscila Mayrelle da Silva; Dhalia, Rafael; Marques-Júnior, Ernesto Torres Azevedo; Martelli, Celina Maria Turchi; Rodrigues, Laura Cunha

    2018-03-01

    A Zika virus epidemic emerged in northeast Brazil in 2015 and was followed by a striking increase in congenital microcephaly cases, triggering a declaration of an international public health emergency. This is the final report of the first case-control study evaluating the potential causes of microcephaly: congenital Zika virus infection, vaccines, and larvicides. The published preliminary report suggested a strong association between microcephaly and congenital Zika virus infection. We did a case-control study in eight public maternity hospitals in Recife, Brazil. Cases were neonates born with microcephaly, defined as a head circumference of 2 SD below the mean. Two controls without microcephaly were matched to each case by expected date of delivery and area of residence. We tested the serum of cases and controls and the CSF of cases for detection of Zika virus genomes with quantitative RT-PCR and for detection of IgM antibodies with capture-IgM ELISA. We also tested maternal serum with plaque reduction neutralisation assays for Zika and dengue viruses. We estimated matched crude and adjusted odds ratios with exact conditional logistic regression to determine the association between microcephaly and Zika virus infection. We screened neonates born between Jan 15 and Nov 30, 2016, and prospectively recruited 91 cases and 173 controls. In 32 (35%) cases, congenital Zika virus infection was confirmed by laboratory tests and no controls had confirmed Zika virus infections. 69 (83%) of 83 cases with known birthweight were small for gestational age, compared with eight (5%) of 173 controls. The overall matched odds ratio was 73·1 (95% CI 13·0-∞) for microcephaly and Zika virus infection after adjustments. Neither vaccination during pregnancy or use of the larvicide pyriproxyfen was associated with microcephaly. Results of laboratory tests for Zika virus and brain imaging results were available for 79 (87%) cases; within these cases, ten were positive for Zika virus

  3. Work plan for upgrading the 241-A-701 compressed air system and motor control center. Revision 1

    International Nuclear Information System (INIS)

    Carpenter, K.E.

    1995-01-01

    This work plan will outline the responsibilities associated with the 241-A-701 Compressed Air System (CAS) and Motor Control Center (MCC) upgrades. All activities required to design, install, test, and operate the modified systems are addressed in this document. Upgrades Technical Support (UTS) of TWRS Engineering is responsible for the completion of all tasks associated with this upgrade. UTS will coordinate the upgrade activities, and ensure all tasks are successfully completed on or before the scheduled dates. The primary objective of the 241-A-701 Compressor and MCC Upgrade is to provide a reliable source of process and instrument compressed air to the A, AX, AY, and AZ tank farms

  4. The Institute for Safe Medication Practices and Poison Control Centers: Collaborating to Prevent Medication Errors and Unintentional Poisonings.

    Science.gov (United States)

    Vaida, Allen J

    2015-06-01

    This article provides an overview on the Institute for Safe Medication Practices (ISMP), the only independent nonprofit organization in the USA devoted to the prevention of medication errors. ISMP developed the national Medication Errors Reporting Program (MERP) and investigates and analyzes errors in order to formulate recommendations to prevent further occurrences. ISMP works closely with the US Food and Drug Administration (FDA), drug manufacturers, professional organizations, and others to promote changes in package design, practice standards, and healthcare practitioner and consumer education. By collaborating with ISMP to share and disseminate information, Poison Control centers, emergency departments, and toxicologists can help decrease unintentional and accidental poisonings.

  5. Medicare Program: Hospital Outpatient Prospective Payment and Ambulatory Surgical Center Payment Systems and Quality Reporting Programs; Short Inpatient Hospital Stays; Transition for Certain Medicare-Dependent, Small Rural Hospitals Under the Hospital Inpatient Prospective Payment System; Provider Administrative Appeals and Judicial Review. Final rule with comment period; final rule.

    Science.gov (United States)

    2015-11-13

    This final rule with comment period revises the Medicare hospital outpatient prospective payment system (OPPS) and the Medicare ambulatory surgical center (ASC) payment system for CY 2016 to implement applicable statutory requirements and changes arising from our continuing experience with these systems. In this final rule with comment period, we describe the changes to the amounts and factors used to determine the payment rates for Medicare services paid under the OPPS and those paid under the ASC payment system. In addition, this final rule with comment period updates and refines the requirements for the Hospital Outpatient Quality Reporting (OQR) Program and the ASC Quality Reporting (ASCQR) Program. Further, this document includes certain finalized policies relating to the hospital inpatient prospective payment system: Changes to the 2-midnight rule under the short inpatient hospital stay policy; and a payment transition for hospitals that lost their status as a Medicare-dependent, small rural hospital (MDH) because they are no longer in a rural area due to the implementation of the new Office of Management and Budget delineations in FY 2015 and have not reclassified from urban to rural before January 1, 2016. In addition, this document contains a final rule that finalizes certain 2015 proposals, and addresses public comments received, relating to the changes in the Medicare regulations governing provider administrative appeals and judicial review relating to appropriate claims in provider cost reports.

  6. An optically sensed control rod drive system for use at the Nuclear Science Center Reactor

    International Nuclear Information System (INIS)

    Krohn, John L.; Fisher, Thomas H.

    1988-01-01

    The optically sensed rod drive control system, installed and modified at the NSCR is described. It has operated very well and has exhibited improved reliability over the previous system. The system has proven to give stable control rod positions, and the daily reset of the position indication serves to reduce the error between indicated and true rod position. The removal of the microswitches used for carriage up and carriage down indication in the previous system, and especially the 120 VAC motor control portion, has reduced the difficulty, time and uncertainty involved in upkeep of the system and also has removed a potentially dangerous source of personnel injury. As more operational experience is gained with this design, it is felt that other minor adjustments and logic changes may come about, but the present design of the system appears to be a successful and sufficient one

  7. A single-center, cross-sectional prevalence study of impulse control disorders in Parkinson disease: association with dopaminergic drugs.

    Science.gov (United States)

    Poletti, Michele; Logi, Chiara; Lucetti, Claudio; Del Dotto, Paolo; Baldacci, Filippo; Vergallo, Andrea; Ulivi, Martina; Del Sarto, Simone; Rossi, Giuseppe; Ceravolo, Roberto; Bonuccelli, Ubaldo

    2013-10-01

    The current study aimed at establishing the prevalence of impulse control disorders (ICDs) in patients with Parkinson disease (PD) and their association with demographic, drug-related, and disease-related characteristics. We performed a single-center cross-sectional study of 805 PD patients. Impulse control disorders were investigated with the Questionnaire for Impulsive Compulsive Disorders in Parkinson's Disease; also comorbid neuropsychiatric complications (dementia, delusions, visual hallucinations) were investigated with clinical interviews and ad hoc instruments (Parkinson Psychosis Questionnaire and Neuropsychiatry Inventory). Impulse control disorders were identified in 65 patients (prevalence, 8.1%), with pathological gambling and hypersexuality the most frequent. Impulse control disorders were present in 57 of 593 cognitively preserved patients (prevalence, 9.6%) and in 8 of 212 demented patients (prevalence, 3.8%). Impulse control disorders were significantly associated with dopamine agonists (odds ratio [OR], 5.50; 95% confidence interval [CI], 2.60-12.46; P Impulse control disorders frequency was similar for pramipexole and ropinirole (16.6% vs 12.5%; OR, 1.45; 95% CI, 0.79-2.74; P = 0.227). Additional variables associated with ICDs were male sex and younger age. These findings suggested that dopaminergic treatments in PD are associated with increased odds of having an ICD, but also other demographic and clinical variables are associated with ICDs, suggesting the multifactorial nature of the ICD phenomenon in PD.

  8. Altered center of mass control during sit-to-walk in elderly adults with and without history of falling.

    Science.gov (United States)

    Chen, Tzurei; Chou, Li-Shan

    2013-09-01

    Sit-to-walk (STW) is a commonly performed activity of daily living that requires a precise coordination between momentum generation and balance control. However, there is a lack of biomechanical data demonstrating how the center of mass (COM) momentum and balance control interact. This study examines COM kinetic energy distribution in three movement directions and COM-Ankle inclination angles during STW among 15 healthy young adults, 15 elderly non-fallers, and 15 elderly fallers. We found that elderly adults, especially elderly fallers, chose a COM control strategy that provided more stability than mobility to perform STW. A smaller forward COM velocity, a more upward COM momentum distribution, and a smaller anterior-posterior COM-Ankle angle characterize this strategy. Healthy elderly adults modified their STW movement around seat-off so that they achieved a more upright position before walking. Elderly fallers not only altered COM control around seat-off but also showed limitation in COM control during gait initiation. Furthermore, their COM control in the medial-lateral direction might be perturbed at swing-off due to an increased distribution of kinetic energy. Examining COM momentum distribution in different movement directions and the relationship between positions of the COM and supporting foot during STW could enhance our ability to identify elderly adults who are at risk of falling. Copyright © 2013 Elsevier B.V. All rights reserved.

  9. Coolant and ambient temperature control for chillerless liquid cooled data centers

    Science.gov (United States)

    Chainer, Timothy J.; David, Milnes P.; Iyengar, Madhusudan K.; Parida, Pritish R.; Simons, Robert E.

    2016-02-02

    Cooling control methods include measuring a temperature of air provided to a plurality of nodes by an air-to-liquid heat exchanger, measuring a temperature of at least one component of the plurality of nodes and finding a maximum component temperature across all such nodes, comparing the maximum component temperature to a first and second component threshold and comparing the air temperature to a first and second air threshold, and controlling a proportion of coolant flow and a coolant flow rate to the air-to-liquid heat exchanger and the plurality of nodes based on the comparisons.

  10. Quality-Controlled Underway Oceanographic and Meteorological Data from the Center for Ocean-Atmospheric Predictions Center (COAPS) - Shipboard Automated Meteorological and Oceanographic System (SAMOS)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Florida State University has been operating a data assembly center (DAC) to collect, quality evaluate, and distribute Shipboard Automated Meteorological and...

  11. The prevalence and impact of prescription controlled substance use among injured patients at a Level I trauma center.

    Science.gov (United States)

    Cannon, Robert; Bozeman, Matthew; Miller, Keith Roy; Smith, Jason Wayne; Harbrecht, Brian; Franklin, Glen; Benns, Matthew

    2014-01-01

    There has been increasing attention focused on the epidemic of prescription drug use in the United States, but little is known about its effects in trauma. The purpose of this study was to define the prevalence of prescription controlled substance use among trauma patients and determine its effects on outcome. A retrospective review of all patients admitted to a Level 1 trauma center from January 1, 2011, to December 31, 2011, was performed. Patients dying within 24 hours or without home medication reconciliations were excluded. Data review included preexisting benzodiazepine or narcotic use, sex, age, mechanism of injury, Injury Severity Scores (ISSs), intensive care unit (ICU) and overall length of stay, ventilator days, and overall cost. SAS version 9.3 was used for the analysis, and p ≤ 0.05 was considered significant. A total of 1,700 patients met inclusion criteria. Of these, 340 (20.0%) were on prescription narcotics and/or benzodiazepines at the time of admission. Patients in the narcotic/benzodiazepine group were significantly older (48 years vs. 43 years) and more likely to be women (43.7% vs. 28.9%). There was no difference in mechanism, ISS, or the presence of head injury between groups. Both ICU length of stay (3.3 days vs. 2.1 days) and total length of stay (7.8 days vs. 6.1 days) were significantly longer in patients on outpatient narcotics and/or benzodiazepines. Excluding severely injured patients, the need for mechanical ventilation was also increased among outpatient controlled substance users (15.8% vs. 11.0%). There is a substantial prevalence of preexisting controlled substance use (20%) among patients at our Level 1 trauma center. Preexisting controlled substance use is associated with longer total hospital and ICU stays. Among mildly to moderately injured patients, preinjury controlled substance is also associated with the need for mechanical ventilation. Prognostic study, level III.

  12. Development of an image processing system at the Technology Applications Center, UNM: Landsat image processing in mineral exploration and related activities. Final report

    International Nuclear Information System (INIS)

    Budge, T.K.

    1980-09-01

    This project was a demonstration of the capabilities of Landsat satellite image processing applied to the monitoring of mining activity in New Mexico. Study areas included the Navajo coal surface mine, the Jackpile uranium surface mine, and the potash mining district near Carlsbad, New Mexico. Computer classifications of a number of land use categories in these mines were presented and discussed. A literature review of a number of case studies concerning the use of Landsat image processing in mineral exploration and related activities was prepared. Included in this review is a discussion of the Landsat satellite system and the basics of computer image processing. Topics such as destriping, contrast stretches, atmospheric corrections, ratioing, and classification techniques are addressed. Summaries of the STANSORT II and ELAS software packages and the Technology Application Center's Digital Image Processing System (TDIPS) are presented

  13. Space and Missile Systems Center Standard: Parts, Materials, and Processes Control Program for Space Vehicles

    Science.gov (United States)

    2013-04-12

    preparation , implementation, and operation of a Parts, Materials, and Processes (PMP) control program for use during the design, development...Processes List CDR Critical Design Review CDRL Contract Data Requirements List CMOS Complementary Metal Oxide Semiconductor CONOPS Concept of Operations...Failure Review Board GFE Government Furnished Equipment GIDEP Government Industry Data Exchange Program HBT Heterojunction Bipolar Transistor IPT

  14. A User-Centered Educational Modeling Language Improving the Controllability of Learning Design Quality

    Science.gov (United States)

    Zendi, Asma; Bouhadada, Tahar; Bousbia, Nabila

    2016-01-01

    Semiformal EMLs are developed to facilitate the adoption of educational modeling languages (EMLs) and to address practitioners' learning design concerns, such as reusability and readability. In this article, SDLD (Structure Dialogue Learning Design) is presented, which is a semiformal EML that aims to improve controllability of learning design…

  15. Building collaboration? Co-location and territoriality in a railway control center

    NARCIS (Netherlands)

    Willems, T.A.H.; van Marrewijk, A.H.

    2017-01-01

    This paper studies the design of co-located spaces and how organizational actors experience such spaces. The literature on co-location is ambiguous about how reduced physical distance increases collaboration. To address this problem, we draw on an ethnographic study of a co-located railway control

  16. Active Return-to-Center Control Based on Torque and Angle Sensors for Electric Power Steering Systems.

    Science.gov (United States)

    Du, Pan-Pan; Su, Hao; Tang, Gong-You

    2018-03-14

    This paper presents a complete control strategy of the active return-to-center (RTC) control for electric power steering (EPS) systems. We first establish the mathematical model of the EPS system and analyze the source and influence of the self-aligning torque (SAT). Second, based on the feedback signals of steering column torque and steering wheel angle, we give the trigger conditions of a state switch between the steering assist state and the RTC state. In order to avoid the sudden change of the output torque for the driving motor when the state switches frequently between the steering assist state and the RTC state, we design an undisturbed state switching logic algorithm. This state switching logic algorithm ensures that the output value of the RTC controller is set to an initial value and increases in given steps up to a maximum value after entering the RTC state, and the output value of the RTC controller will reduce in given steps down to zero when exiting the RTC state. This therefore ensures smooth switch control between the two states and improves the driver's steering feeling. Third, we design the RTC controller, which depends upon the feedback signals of the steering wheel angle and the angular velocity. In addition, the controller increases the auxiliary control function of the RTC torque based on vehicle speed. The experimental results show that the active RTC control method does not affect the basic assist characteristics, which effectively reduces the residual angle of the steering wheel at low vehicle speed and improves the RTC performance of the vehicle.

  17. Active Return-to-Center Control Based on Torque and Angle Sensors for Electric Power Steering Systems

    Directory of Open Access Journals (Sweden)

    Pan-Pan Du

    2018-03-01

    Full Text Available This paper presents a complete control strategy of the active return-to-center (RTC control for electric power steering (EPS systems. We first establish the mathematical model of the EPS system and analyze the source and influence of the self-aligning torque (SAT. Second, based on the feedback signals of steering column torque and steering wheel angle, we give the trigger conditions of a state switch between the steering assist state and the RTC state. In order to avoid the sudden change of the output torque for the driving motor when the state switches frequently between the steering assist state and the RTC state, we design an undisturbed state switching logic algorithm. This state switching logic algorithm ensures that the output value of the RTC controller is set to an initial value and increases in given steps up to a maximum value after entering the RTC state, and the output value of the RTC controller will reduce in given steps down to zero when exiting the RTC state. This therefore ensures smooth switch control between the two states and improves the driver’s steering feeling. Third, we design the RTC controller, which depends upon the feedback signals of the steering wheel angle and the angular velocity. In addition, the controller increases the auxiliary control function of the RTC torque based on vehicle speed. The experimental results show that the active RTC control method does not affect the basic assist characteristics, which effectively reduces the residual angle of the steering wheel at low vehicle speed and improves the RTC performance of the vehicle.

  18. Material shielding of power frequency magnetic fields: Research and testing results from the EPRI Power Delivery Center-Lenox. Final report

    International Nuclear Information System (INIS)

    Anderson, C.B.

    1998-06-01

    Extensive investigations of a variety of material shielding methods have been performed at the EPRI Power Delivery Center--Lenox, Massachusetts. This work is part of a larger shielding investigation being done for EPRI by Electric Research and Management, Inc. (ERM) as part of the Magnetic Field Management Target in the EPRI Environment Group. Part of this work, involving cylinders of material, is to be included in a shielding handbook being prepared by ERM. Material shielding tests, not included in the handbook, as well as additional material shielding research, including testing, analyses, and computer simulations performed at the EPRI Power Delivery Center--Lenox are documented here. One of the major complications of using materials to shield magnetic fields is the mathematical complexity of the phenomenon involved. The result is that analytical solutions exist only for a very small number of simple geometries such as spheres, infinitely long cylinders, and infinite sheets. In practice, the materials typically come in the form of sheets. At present, there are no analytical methods for directly determining the shielding effectiveness of finite sheets of material, however, EPRI is sponsoring work in this area. There are some methods based on conformal mapping which can provide a solution for simple two-dimensional sheets. While such methods are useful in gaining insight into the mechanisms of shielding, they are not realistic enough to provide accurate shielding estimates. Empirical techniques are still required to determine the shielding effectiveness of material sheets. The material shielding tests and computer simulations are described in the report. The results of these tests and simulations have been used to develop a number of material shielding design rules for use in practical applications

  19. TWRS Final Safety Analysis Report (FSAR) integrated control decision team (ICDT) meetings January 22 - 31,1997

    International Nuclear Information System (INIS)

    Saladin, V.L.

    1997-01-01

    U.S. Department of Energy (DOE), Richland Operations Office (RL) letter 97-MSD-163 dated January 15, 1997, directed the Project Hanford Management Contractor (Contractor), Fluor Daniel Hanford, inc., to form a joint RL-Contractor Integrated Control Decision Team (ICDT) to evaluate the Tank Waste Remediation System (TWRS) Final Safety Analysis Report (FSAR) accident scenarios that were identified to be above the risk evaluation guidelines (radiological and/or toxicological) defined by the April 8, 1996, letter from J. Kinzer, RL-TWRS (96-MSO-069) to Dr. A. L. Trego, Westinghouse Hanford Company. The ICDT evaluated six postulated accidents from the draft FSAR which had analyzed consequences above the DOE directed risk evaluation guidelines after controls were applied. The accidents were: (1) Organic Solvent Fires; (2) Organic Salt-Nitrate Fire; (3) Spray Leak; (4) Flammable Gas; (5) Steam Intrusion; and (6) Seismic Event. Five of the postulated accidents exceed radiological risk guidelines. Although the postulated steam intrusion accident does not exceed the radiological risk guidelines, it was considered in the ICDT evaluation because its calculated consequences exceed toxicological risk evaluation guidelines. Figure 1 delineates the mitigated and unmitigated risk evaluations performed for the FSAR

  20. [Internal quality control on HER2 status determination in breast cancers: Experience of a cancer center].

    Science.gov (United States)

    Ngo, Carine; Laé, Marick; Ratour, Julia; Hamel, Frédérique; Taris, Corinne; Caly, Martial; Le Cunff, Annie; Reyal, Fabien; Kirova, Youlia; Pierga, Jean-Yves; Vincent-Salomon, Anne

    The implementation of an internal quality control is mandatory to guarantee the accuracy of HER2 status in invasive breast cancers. To evaluate the impact of our quality control assurance on HER2 status results in invasive breast carcinomas from 2008 to 2014. HER2 status was determined by immunohistochemistry as the first-line indication, completed by fluorescence in situ hybridization (FISH) for scores 2+ by immunohistochemistry. Internal quality control of HER2 status relied on the standardization of pre-analytical phases, the use of external controls with a known number of HER2 gene copies determined by FISH and continued monitoring of concordance between immunohistochemistry and FISH. The proportion of HER2-positive cases corresponding to scores 3+ by immunohistochemistry and 2+ amplified by FISH varied from 10.6% to 13.8% (median of 11.3%). The proportion of scores 2+ amplified by FISH varied from 13.3% to 32.7% during period of study. The rate of concordance between FISH and immunohistochemistry for score 0/1+ and 3+ cases were≥97%. Eight among 12 discordant cases were false positive resulting from errors in interpretation of immunohistochemistry (score 2+ instead of 3+). Calibration of immunohistochemistry on FISH for HER2 status contributes to limit variability of immunohistochemistry results due to technical issues or interpretation. The implementation of an external control of score 3+ on each slide enables accurate interpretation of score 2+ and 3+ by immunohistochemistry. Copyright © 2017 Société Française du Cancer. Published by Elsevier Masson SAS. All rights reserved.

  1. Clinical pharmacists on medical care of pediatric inpatients: a single-center randomized controlled trial.

    Directory of Open Access Journals (Sweden)

    Chuan Zhang

    Full Text Available OBJECTIVE: To explore the best interventions and working patterns of clinical pharmacists in pediatrics and to determine the effectiveness of clinical pharmacists in pediatrics. METHODS: We conducted a randomized controlled trial of 160 pediatric patients with nerve system disease, respiratory system disease or digestive system disease, who were randomly allocated into two groups, with 80 in each group. Interventions by clinical pharmacists in the experimental group included answering questions of physicians and nurses, giving advice on treating patients, checking prescriptions and patient counseling at discharge. In the control group, patients were treated without clinical pharmacist interventions. RESULTS: Of the 109 interventions provided by clinical pharmacists during 4 months, 47 were consultations for physicians and nurses, 31 were suggestions of treatment, with 30 accepted by physicians (96.77% and 31 were medical errors found in 641 prescriptions. Five adverse drug reactions were submitted to the adverse drug reaction monitoring network, with three in the experimental group and two in the control group. The average length of stay (LOS for patients with respiratory system diseases in the experimental group was 6.45 days, in comparison with 10.83 days in the control group, which was statistically different (p value<0.05; Average drug compliance rate in the experimental group was 81.41%, in comparison with 70.17% of the control group, which was statistically different (p value<0.05. Cost of drugs and hospitalization and rate of readmission in two weeks after discharge in the two groups were not statistically different. CONCLUSION: Participation by clinical pharmacists in the pharmacotherapy of pediatric patients can reduce LOS of patients with respiratory system disease and improve compliance rate through discharge education, showing no significant effects on prevention of ADR, reduction of cost of drugs and hospitalization and readmission

  2. Redox-controlled dinitrosyl formation at the diiron-oxo center of NorA.

    Science.gov (United States)

    Cramm, Rainer; Strube, Katja

    2008-01-01

    In the denitrifying bacterium Ralstonia eutropha H16, the NorA protein is coproduced with the respiratory nitric oxide (NO) reductase. NorA contains a diiron-oxo center, which can form stable adducts with dioxygen and NO. In contrast to other diiron proteins, the formation of NorA-NO requires both fully reduced protein and additional electrons. A minor fraction of in vitro NorA-NO represents a paramagnetic dinitrosyl iron complex (DNIC), while the major fraction is attributed to a DNIC of the structure {Fe(NO)(2)}, which shows no electron paramagnetic resonance. The NorA-DNIC may be formed either upon direct reaction of the protein with NO or upon incubation with nitrite due to an intrinsic nitrite reduction activity of NorA that liberates NO. NorA can be purified rapidly as a six histidine-tagged derivative from overproducing cells of Escherichia coli. This chapter describes procedures for the preparation of different redox forms of NorA for the formation of NorA adducts with NO, dioxygen, and azide, as well as for the quantification of NorA-bound NO.

  3. A symphony of regulations centered on p63 to control development of ectoderm-derived structures.

    Science.gov (United States)

    Guerrini, Luisa; Costanzo, Antonio; Merlo, Giorgio R

    2011-01-01

    The p53-related transcription factor p63 is critically important for basic cellular functions during development of the ectoderm and derived structure and tissues, including skin, limb, palate, and hair. On the one side, p63 is required to sustain the proliferation of keratinocyte progenitors, while on the other side it is required for cell stratification, commitment to differentiate, cell adhesion, and epithelial-mesenchymal signaling. Molecules that are components or regulators of the p63 pathway(s) are rapidly being identified, and it comes with no surprise that alterations in the p63 pathway lead to congenital conditions in which the skin and other ectoderm-derived structures are affected. In this paper, we summarize the current knowledge of the molecular and cellular regulations centered on p63, derived from the comprehension of p63-linked human diseases and the corresponding animal models, as well as from cellular models and high-throughput molecular approaches. We point out common themes and features, that allow to speculate on the possible role of p63 downstream events and their potential exploitation in future attempts to correct the congenital defect in preclinical studies.

  4. Observations on the radiochemical control of radiopharmaceuticals at tajoura nuclear research center (TNRC)

    International Nuclear Information System (INIS)

    Abuzwida, M.A.; Saad, M.A.; Elmagrahi, H.; Elghanodi, Y.

    1998-01-01

    Production of radioisotopes for the radiopharmaceutical purposes is the main task of Tajoura nuclear center. During the analysis of the 131 I- radioactive solution which was produced using the so-called dry method, the following has been observed : in order to reduce the cost and the time of analytical cycle or time used for the radiochemical purity (RCP), a spot test has been used to indicate the position of the radioactivity in the chromatogram rather than using autoradiographing or the x-ray films. This method was based on the reaction between I 2 and starch to give a blue color at different R f values I 2 is liberated by I - oxidation (H 2 O 2 ) or by IO - 3 reaction with SCN - in the presence of HCl. A simple and fast test for the estimation of the content in the radioactive sample has been elaborated.This method was based on the reduction of Te (IV) or (VI) to Te metal using SnCI 2 in a alkaline media. The detection limit of the elaborated method was found to be 131 I- buffer solution, and 16.0 m S for Na CI saline solution were obtained

  5. The IEO Data Center Management System: Tools for quality control, analysis and access marine data

    Science.gov (United States)

    Casas, Antonia; Garcia, Maria Jesus; Nikouline, Andrei

    2010-05-01

    Since 1994 the Data Centre of the Spanish Oceanographic Institute develops system for archiving and quality control of oceanographic data. The work started in the frame of the European Marine Science & Technology Programme (MAST) when a consortium of several Mediterranean Data Centres began to work on the MEDATLAS project. Along the years, old software modules for MS DOS were rewritten, improved and migrated to Windows environment. Oceanographic data quality control includes now not only vertical profiles (mainly CTD and bottles observations) but also time series of currents and sea level observations. New powerful routines for analysis and for graphic visualization were added. Data presented originally in ASCII format were organized recently in an open source MySQL database. Nowadays, the IEO, as part of SeaDataNet Infrastructure, has designed and developed a new information system, consistent with the ISO 19115 and SeaDataNet standards, in order to manage the large and diverse marine data and information originated in Spain by different sources, and to interoperate with SeaDataNet. The system works with data stored in ASCII files (MEDATLAS, ODV) as well as data stored within the relational database. The components of the system are: 1.MEDATLAS Format and Quality Control - QCDAMAR: Quality Control of Marine Data. Main set of tools for working with data presented as text files. Includes extended quality control (searching for duplicated cruises and profiles, checking date, position, ship velocity, constant profiles, spikes, density inversion, sounding, acceptable data, impossible regional values,...) and input/output filters. - QCMareas: A set of procedures for the quality control of tide gauge data according to standard international Sea Level Observing System. These procedures include checking for unexpected anomalies in the time series, interpolation, filtering, computation of basic statistics and residuals. 2. DAMAR: A relational data base (MySql) designed to

  6. Feed Materials Production Center. Final phase-in report volume 11 of 15 waste management, October 25, 1985--December 31, 1985

    Energy Technology Data Exchange (ETDEWEB)

    Watts, R.E.

    1986-01-17

    This volume of the Transition Final Report provides the findings, recommendations and corrective actions for the Waste Management areas developed during the phase-in actions by Westinghouse Materials Company (WMCO). The objective is to provide a summary of the studies and investigations performed by the WMCO Company during the transition period. The Waste Management effort at FMPC was expanded in 1984 when a separate group was formed within the NLO organization. This is considered to be an area where significant increase in priority and effort must be applied to resolve waste management problems and to bring the site in conformity to regulations and the Environmental Health/Safety Standards. During the transition, there was a comprehensive investigation in all areas of air, liquid and solid waste management for nuclear, chemical and conventional wastes. Not all of these investigations are documented in this report, but the information gathered was used in the development of the budgets (cost accounts), programs, and organizational planning.

  7. Controlling the Coupling of a Single Nitrogen Vacancy Center to a Silver Nanowire

    DEFF Research Database (Denmark)

    Huck, Alexander; Kumar, Shailesh; Shakoor, Abdul

    2011-01-01

    Dipole emitters are expected to efficiently couple to the plasmonic mode propagating along a cylindrically shaped metallic nano-structure. Such a strongly coupled system could serve as a fundamental building block for a single photon source on demand and a device enabling strong non-linear intera...... control over the relative nanowire diamond nano-crystal position is achieved by using an atomic force microscope (AFM) in contact mode operation....

  8. US/Belarusian government-to-government material protection, control, and accounting cooperation at the Sosny Science and Technology Center

    International Nuclear Information System (INIS)

    Case, R.S. Jr.; Baumann, M.; Madsen, R.W.; Krevsum, E.; Haase, M.

    1996-01-01

    A formal program of cooperation between the US Department of Energy and the Belarusian regulatory agency Promatomnazdor (PAN) began in 1994. A visit to the Belarusian Sosny Science and Technology Center (SSTC) by representatives from the US, Sweden, Japan, and the International Atomic Energy Agency resulted in a multinational program of cooperation to enhance the existing material protection, control, and accounting systems in place at Sosny. Specific physical-protection-related recommendations included upgrades to the physical protection systems at Buildings 33 and 40 at Sosny and the security systems in the SSTC central alarm station. US experts in conjunction with the multinational team and Belarus representatives, have reviewed initial designs for physical protection upgrades at Sosny. Subsequently, the US assumed an essential role for funding and technical oversight for enhancements at the SSTC, aspects of its emergency communication systems, and the upgrade of the SSTC site access control system. This paper addresses the status of physical protection enhancements at the Sosny site

  9. Clinical relevance of surgical site infection as defined by the criteria of the Centers for Disease Control and Prevention

    DEFF Research Database (Denmark)

    Henriksen, N A; Meyhoff, C S; Wetterslev, J

    2010-01-01

    Surgical site infection (SSI) is a common complication after abdominal surgery and the Centers for Disease Control and Prevention (CDC) criteria are commonly used for diagnosis and surveillance. The aim of this study was to evaluate whether SSI diagnosed according to CDC is clinically relevant...... diagnosed with SSI and a matched control group (N=46) without SSI according to the CDC criteria after laparotomy. Two blinded experienced surgeons evaluated the hospital records and determined whether patients had CRSSI, based on the following criteria: antibiotic treatment, surgical intervention, prolonged...... hospital stay or referral to an intensive care unit for SSI. The rate of CRSSI was 38 of 54 (70%) in patients with CDC-diagnosed SSI and none in patients without a CDC-diagnosed SSI. Sixty-one percent of the CDC-diagnosed SSIs were superficial, of which 48% were considered clinically relevant...

  10. Control of in-plane texture of body centered cubic metal thin films

    International Nuclear Information System (INIS)

    Harper, J.M.; Rodbell, K.P.; Colgan, E.G.; Hammond, R.H.

    1997-01-01

    We show that dramatically different in-plane textures can be produced in body centered cubic (bcc) metal thin films deposited on amorphous substrates under different deposition conditions. The crystallographic orientation distribution of polycrystalline bcc metal thin films on amorphous substrates often has a strong left-angle 110 right-angle fiber texture, indicating that {110} planes are parallel to the substrate plane. When deposition takes place under bombardment by energetic ions or atoms at an off-normal angle of incidence, the left-angle 110 right-angle fiber texture develops an in-plane texture, indicating nonrandom azimuthal orientations of the crystallites. Three orientations in Nb films have been observed under different deposition geometries, in which the energetic particle flux coincides with channeling directions in the bcc crystal structure. In-plane orientations in Mo films have also been obtained in magnetron sputtering systems with various configurations. These are described, and an example is given in which the in-plane orientation of Mo films deposited in two different in-line magnetron sputtering systems differs by a 90 degree rotation. In these two cases, there is a strong left-angle 110 right-angle fiber texture, but the in-plane left-angle 100 right-angle direction is oriented parallel to the scan direction in one system, and perpendicular to the scan direction in the other system. The conditions which produce such different in-plane textures in two apparently similar sputtering systems are discussed. copyright 1997 American Institute of Physics

  11. Epidemic assistance by the Centers for Disease Control and Prevention: role of the Epidemic Intelligence Service, 1946-2005.

    Science.gov (United States)

    Thacker, Stephen B; Stroup, Donna F; Sencer, David J

    2011-12-01

    Since 1946, the Centers for Disease Control and Prevention has responded to urgent requests from US states, federal agencies, and international organizations through epidemic-assistance investigations (Epi-Aids). The authors describe the first 60 years of Epi-Aids, breadth of problems addressed, evolution of methodologies, scope of activities, and impact of investigations on population health. They reviewed Epi-Aid reports and EIS Bulletins, contacted current and former Epidemic Intelligence Service staff, and systematically searched the PubMed and Web of Science databases. They abstracted information on dates, location, staff involved, health problems, methods, and impacts of investigations according to a preplanned protocol. They assessed the methods presented as well as the quality of reports. During 1946-2005, a total of 4,484 investigations of health events were initiated by 2,815 Epidemic Intelligence Service officers. In the early years, the majority were in response to infectious agents, although environmental problems emerged. Investigations in subsequent years focused on occupational conditions, birth defects, reproductive health, tobacco use, cancer, violence, legal debate, and terrorism. These Epi-Aids heralded expansion of the agency's mission and presented new methods in statistics and epidemiology. Recommendations from Epi-Aids led to policy implementation, evaluation, or modification. Epi-Aids provide the Centers for Disease Control and Prevention with the agility to respond rapidly to public health crises.

  12. Clinical relevance of surgical site infection as defined by the criteria of the Centers for Disease Control and Prevention

    DEFF Research Database (Denmark)

    Henriksen, N A; Meyhoff, C S; Wetterslev, J

    2010-01-01

    Surgical site infection (SSI) is a common complication after abdominal surgery and the Centers for Disease Control and Prevention (CDC) criteria are commonly used for diagnosis and surveillance. The aim of this study was to evaluate whether SSI diagnosed according to CDC is clinically relevant (C...... a suitable standard definition for monitoring and identifying SSI, even if some cases of less clinically significant superficial SSI are included.......Surgical site infection (SSI) is a common complication after abdominal surgery and the Centers for Disease Control and Prevention (CDC) criteria are commonly used for diagnosis and surveillance. The aim of this study was to evaluate whether SSI diagnosed according to CDC is clinically relevant...... hospital stay or referral to an intensive care unit for SSI. The rate of CRSSI was 38 of 54 (70%) in patients with CDC-diagnosed SSI and none in patients without a CDC-diagnosed SSI. Sixty-one percent of the CDC-diagnosed SSIs were superficial, of which 48% were considered clinically relevant...

  13. An advanced automation system for operation of Sao Paulo pumping stations from TRANSPETRO Master Control Center - CNCO

    Energy Technology Data Exchange (ETDEWEB)

    Corcioli, Mario Sergio; Barreto, Camila Maria Benevenuto [TRANSPETRO, Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Since 2000 the operations of the TRANSPETRO pumping stations in the state of Sao Paulo region began to be transferred from local control centers located at the transfer and storage terminals to the National Operational Control Center (CNCO) of TRANSPETRO, located at the headquarters of the company, in Rio de Janeiro. The proposed paper aims to presenting an overview of the automation system that was developed to enable such pumping stations to be operated from CNCO in a reliable and secure manner, focusing on tools that offer an embedded system alarms completely free of false alarms with automatic determining of the root cause, and also automatic and advanced diagnoses of problems caused by failures of hardware, human error and abnormal conditions of the process, providing the CNCO SCADA system of accurate and quality information that help operators to make decisions. The referred automation system was integrated for the first time to CNCO SCADA system in 2000, for pipeline pumps of Osvat (Sao Sebastiao - Vale do Paraiba pipeline) station at the Sao Sebastiao Terminal - northern coast of Sao Paulo region. (author)

  14. [Differences in attachment and personality in children from child guidance centers, child psychiatry units, and control families].

    Science.gov (United States)

    Zimmermann, Peter; Scheuerer-Englisch, Hermann

    2013-01-01

    Insecure attachment and deficits in self-regulation as personality traits are risk factors for the development of psychopathological symptoms from infancy on. This study examines differences in attachment and personality in late childhood, comparing children from non-clinical families, from a child guidance center, and child psychiatry units with in-patient care. Children's attachment representations, their attachment behavior strategy, reported distressing parental behavior, their emotional openness, and attachment coherency were assessed with the Late Childhood Attachment Interview (LCAI). Ego-resiliency, ego-undercontrol, field-independence, aggressiveness, and anxiety were assessed by means of the California Child Q-Sort. The results show clear attachment differences, with the child guidance group showing more attachment insecurity in the LCAI compared to the control group, and the psychiatric in-patient group even more attachment insecurity, more distressing parenting from both mother and father, and more attachment disorganization than the other two groups. Whereas children from the child guidance center and the child psychiatry unit did not differ in personality, both groups were significantly different from the control group in all personality dimensions. The results suggest that personality differences may be a risk factor for behaviour problems, however problem severity and the choice of the treatment institution seem to be influenced by attachment security.

  15. Virus-Induced Chaperone-Enriched (VICE domains function as nuclear protein quality control centers during HSV-1 infection.

    Directory of Open Access Journals (Sweden)

    Christine M Livingston

    2009-10-01

    Full Text Available Virus-Induced Chaperone-Enriched (VICE domains form adjacent to nuclear viral replication compartments (RC during the early stages of HSV-1 infection. Between 2 and 3 hours post infection at a MOI of 10, host protein quality control machinery such as molecular chaperones (e.g. Hsc70, the 20S proteasome and ubiquitin are reorganized from a diffuse nuclear distribution pattern to sequestration in VICE domains. The observation that VICE domains contain putative misfolded proteins suggests that they may be similar to nuclear inclusion bodies that form under conditions in which the protein quality control machinery is overwhelmed by the presence of misfolded proteins. The detection of Hsc70 in VICE domains, but not in nuclear inclusion bodies, indicates that Hsc70 is specifically reorganized by HSV-1 infection. We hypothesize that HSV-1 infection induces the formation of nuclear protein quality control centers to remodel or degrade aberrant nuclear proteins that would otherwise interfere with productive infection. Detection of proteolytic activity in VICE domains suggests that substrates may be degraded by the 20S proteasome in VICE domains. FRAP analysis reveals that GFP-Hsc70 is dynamically associated with VICE domains, suggesting a role for Hsc70 in scanning the infected nucleus for misfolded proteins. During 42 degrees C heat shock, Hsc70 is redistributed from VICE domains into RC perhaps to remodel viral replication and regulatory proteins that have become insoluble in these compartments. The experiments presented in this paper suggest that VICE domains are nuclear protein quality control centers that are modified by HSV-1 to promote productive infection.

  16. Fuel Cell Demonstration Project - 200 kW - Phosphoric Acid Fuel Cell Power Plant Located at the National Transportation Research Center: FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Berry, JB

    2005-05-06

    Oak Ridge National Laboratory (ORNL) researches and develops distributed generation technology for the Department of Energy, Energy Efficiency and Renewable Energy Distributed Energy Program. This report describes installation and operation of one such distributed generation system, a United Technology Corporation fuel cell located at the National Transportation Research Center in Knoxville, Tennessee. Data collected from June 2003 to June of 2004, provides valuable insight regarding fuel cell-grid compatibility and the cost-benefit of the fuel cell operation. The NTRC fuel cell included a high-heat recovery option so that use of thermal energy improves project economics and improves system efficiency to 59% year round. During the year the fuel cell supplied a total of 834MWh to the NTRC and provided 300MBtu of hot water. Installation of the NTRC fuel cell was funded by the Distributed Energy Program with partial funding from the Department of Defense's Climate Change Fuel Cell Buy Down Program, administered by the National Energy Technology Laboratory. On-going operational expenses are funded by ORNL's utility budget and are paid from operational cost savings. Technical information and the benefit-cost of the fuel cell are both evaluated in this report and sister reports.

  17. Nuclear safety analyses and core design calculations to convert the Texas A & M University Nuclear Science Center reactor to low enrichment uranium fuel. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Parish, T.A.

    1995-03-02

    This project involved performing the nuclear design and safety analyses needed to modify the license issued by the Nuclear Regulatory Commission to allow operation of the Texas A& M University Nuclear Science Center Reactor (NSCR) with a core containing low enrichment uranium (LEU) fuel. The specific type of LEU fuel to be considered was the TRIGA 20-20 fuel produced by General Atomic. Computer codes for the neutronic analyses were provided by Argonne National Laboratory (ANL) and the assistance of William Woodruff of ANL in helping the NSCR staff to learn the proper use of the codes is gratefully acknowledged. The codes applied in the LEU analyses were WIMSd4/m, DIF3D, NCTRIGA and PARET. These codes allowed full three dimensional, temperature and burnup dependent calculations modelling the NSCR core to be performed for the first time. In addition, temperature coefficients of reactivity and pulsing calculations were carried out in-house, whereas in the past this modelling had been performed at General Atomic. In order to benchmark the newly acquired codes, modelling of the current NSCR core with highly enriched uranium fuel was also carried out. Calculated results were compared to both earlier licensing calculations and experimental data and the new methods were found to achieve excellent agreement with both. Therefore, even if an LEU core is never loaded at the NSCR, this project has resulted in a significant improvement in the nuclear safety analysis capabilities established and maintained at the NSCR.

  18. Long-term management of liquid high-level radioactive wastes stored at the Western New York Nuclear Service Center, West Valley. Final environmental impact statement

    International Nuclear Information System (INIS)

    1982-06-01

    The statement assesses and compares environmental implications of possible alternatives for long-term management of the liquid high-level radioactive wastes stored in underground tanks at the Western New York Nuclear Service Center in West Valley, New York. Four basic alternatives, as well as options within these alternatives, have been considered in the EIS: (1) onsite processing to a terminal waste form for shipment and disposal in a federal repository (the preferred alternative); (2) onsite conversion to a solid interim form for shipment to a federal waste facility for later processing to a terminal form and shipment and subsequent disposal in a federal repository; (3) mixing the liquid wastes with cement and other additives, pouring it back into the existing tanks, and leaving onsite; and (4) no action (continued storage of the wastes in liquid form in the underground tanks at West Valley). Mitigative measures for environmental impacts have been considered for all alternatives. No significant stresses on supplies or irreversible and irretrievable resources are anticipated, and no scarce resource would be required

  19. Problem of two-level hierarchical minimax program control the final state of regional social and economic system in the presence of risks

    International Nuclear Information System (INIS)

    Shorikov, A. F.

    2015-01-01

    This article discusses a discrete-time dynamical system consisting of a set a controllable objects (region and forming it municipalities). The dynamics each of these is described by the corresponding vector nonlinear discrete-time recurrent vector equations and its control system consist from two levels: basic (control level I) that is dominating and subordinate level (control level II). Both levels have different criterions of functioning and united a priori by determined informational and control connections defined in advance. In this paper we study the problem of optimization of guaranteed result for program control by the final state of regional social and economic system in the presence of risks. For this problem we proposed in this work an economical and mathematical model of two-level hierarchical minimax program control the final state of regional social and economic system in the presence of risks and the general scheme for its solving

  20. Problem of two-level hierarchical minimax program control the final state of regional social and economic system in the presence of risks

    Energy Technology Data Exchange (ETDEWEB)

    Shorikov, A. F., E-mail: afshorikov@mail.ru [Ural Federal University, 19 S. Mira, Ekaterinburg, 620002, Russia Institute of Mathematics and Mechanics, Ural Branch of Russian Academy of Sciences, 16 S. Kovalevskaya, Ekaterinburg, 620990 (Russian Federation)

    2015-11-30

    This article discusses a discrete-time dynamical system consisting of a set a controllable objects (region and forming it municipalities). The dynamics each of these is described by the corresponding vector nonlinear discrete-time recurrent vector equations and its control system consist from two levels: basic (control level I) that is dominating and subordinate level (control level II). Both levels have different criterions of functioning and united a priori by determined informational and control connections defined in advance. In this paper we study the problem of optimization of guaranteed result for program control by the final state of regional social and economic system in the presence of risks. For this problem we proposed in this work an economical and mathematical model of two-level hierarchical minimax program control the final state of regional social and economic system in the presence of risks and the general scheme for its solving.