Optimization of control bars patterns and fuel recharges of coupled form; Optimizacion de patrones de barras de control y recargas de combustible de forma acoplada

Energy Technology Data Exchange (ETDEWEB)

Mejia S, D.M.; Ortiz S, J.J. [ININ, 52750 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: dulcema6715@hotmail.com

2006-07-01

In this work a system coupled for the optimization of fuel recharges and control bars patterns in boiling water reactors (BWR by its initials in English) is presented. It was used a multi state recurrent neural net like optimization technique. This type of neural net has been used in the solution of diverse problems, in particular the design of patterns of control bars and the design of the fuel recharge. However, these problems have been resolved in an independent way with different optimization techniques. The system was developed in FORTRAN 77 language, it calls OCORN (Optimization of Cycles of Operation using Neural Nets) and it solves both problems of combinatory optimization in a coupled way. OCORN begins creating a seed recharge by means of an optimization through the Haling principle. Later on a pattern of control bars for this recharge seed is proposed. Then a new fuel recharge is designed using the control bars patterns previously found. By this way an iterative process begins among the optimization of control bars patterns and the fuel recharge until a stop criteria it is completed. The stop criteria is completed when the fuel recharges and the control bars patterns don't vary in several successive iterations. The final result is an optimal fuel recharge and its respective control bars pattern. In this work the obtained results by this system for a cycle of balance of 18 months divided in 12 steps of burnt are presented. The obtained results are very encouraging, since the fuel recharge and the control bars pattern, its fulfill with the restrictions imposed in each one of the problems. (Author)

Optimal control of parametric oscillations of compressed flexible bars

Science.gov (United States)

Alesova, I. M.; Babadzanjanz, L. K.; Pototskaya, I. Yu.; Pupysheva, Yu. Yu.; Saakyan, A. T.

2018-05-01

In this paper the problem of damping of the linear systems oscillations with piece-wise constant control is solved. The motion of bar construction is reduced to the form described by Hill's differential equation using the Bubnov-Galerkin method. To calculate switching moments of the one-side control the method of sequential linear programming is used. The elements of the fundamental matrix of the Hill's equation are approximated by trigonometric series. Examples of the optimal control of the systems for various initial conditions and different number of control stages have been calculated. The corresponding phase trajectories and transient processes are represented.

Voltage stability analysis considering the load dynamic characteristics and the voltage control devices; Analisis de estabilidad de voltaje considerando las caracteristicas dinamicas de la carga y dispositivos de control de voltaje

Energy Technology Data Exchange (ETDEWEB)

Hernandez Alvarez, Enrique

2001-09-15

improvement of the voltage stability. Finally, the application of the proposed methods of study to the analysis of voltage stability in an electrical network derived from the Mexican Peninsular system is presented. The influence of voltage control devices in the stability phenomenon is discussed and a comparison with the results obtained by means of other analysis techniques are presented, specifically, the study of the Q-V curves and the modal analysis of the power flow equations. [Spanish] El trabajo de investigacion que se presenta en esta tesis se centra en el analisis de la estabilidad de voltaje de mediano plazo considerando el efecto de las caracteristicas de la carga y su interaccion con los modelos de dispositivos de control de voltaje en la red de transmision. Mas concretamente, se define y estudia un tipo de modelo de carga con caracteristicas deseables para el estudio de la estabilidad de voltaje; los modelos genericos de carga derivados de pruebas de campo o de la aplicacion de tecnicas de identificacion y se analiza la influencia de la aplicacion de dispositivos de control para mejorar los margenes de estabilidad del sistema. Se estudian, asimismo, alternativas al modelado de sistemas de potencia para el estudio de la estabilidad de voltaje en sistemas complejos. Se presenta, en primer lugar, un analisis fundamental de las caracteristicas de estabilidad de voltaje en un sistema simplificado de potencia y se introduce el metodo de analisis adoptado. Se muestra que el fenomeno de inestabilidad se manifiesta como una bifurcacion tipo singular inducida del modo critico de voltaje cuando se opera el sistema bajo condiciones de estres. A continuacion, se analiza la contribucion de la accion de dispositivos de control al margen de estabilidad y se deducen criterios de analisis de estabilidad basados en el estudio de dicho modo. Se propone, a continuacion, un modelo lineal del sistema de potencia con caracteristicas deseables para el estudio de la estabilidad de voltaje

Passive control of cavitating flow around an axisymmetric projectile by using a trip bar

Directory of Open Access Journals (Sweden)

Jian Huang

2017-07-01

Full Text Available Quasi-periodical evolutions such as shedding and collapsing of unsteady cloud cavitating flow, induce strong pressure fluctuations, what may deteriorate maneuvering stability and corrode surfaces of underwater vehicles. This paper analyzed effects on cavitation stability of a trip bar arranged on high-speed underwater projectile. Small scale water tank experiment and large eddy simulation using the open source software OpenFOAM were used, and the results agree well with each other. Results also indicate that trip bar can obstruct downstream re-entrant jet and pressure wave propagation caused by collapse, resulting in a relatively stable sheet cavity between trip bar and shoulder of projectiles. Keywords: Unsteady cavitating flow, Trip bar, Re-entrant jet, Passive flow control

Analysis of a calculation method for the determination of the value of safety or control bars

International Nuclear Information System (INIS)

Aguilar H, F.; Torres A, C.; Filio L, C.

1982-09-01

Due to the control or safety bars in a nuclear reactor are constituted by strongly absorbent materials, the Diffusion Theory like tool for the calculation of bar values is not directly applicable, should it use the Transport Theory. However the speed and economy of the Diffusion codes for the reactors calculation, those make attractiveness and by this reason its are used in the determination of characteristic parameters and even in the determination of bar values, not without before to make some theoretical developments that allow to make applicable this theory. The application of the Diffusion Theory in strongly absorbent media is based on the use of some effective cross sections distinct from the real ones obtained when imposing the reason that among the flow and it gradient in the external surface of such media (control element in general, bar type or flagstone) be similar to the one obtained using Transport Theory in all the control region (multiplicative and absorbent media) with those real cross sections. The effective cross sections were obtained of the Leopard-NUMICE cell code which has incorporate the respective calculation theory of effective cross sections. Later these constants its were used in the bidimensional diffusion code Exterminator-II, simulating in it, the distribution of safety or control bars. From the cell code its were also obtained the respective constants of the homogeneous fuel cell. The results as soon as those obtained bar values of the diffusion code, its were compared with some experimental results obtained in the Rφ Swedish reactor of natural uranium and heavy water. In this work an analysis of the bar value of one of them, trying to determine the applicability of the method is made. (Author)

Obtention control bars patterns for a BWR using Tabo search; Obtencion de patrones de barras de control para un BWR usando busqueda Tabu

Energy Technology Data Exchange (ETDEWEB)

Castillo, A.; Ortiz, J.J.; Alonso, G. [Instituto Nacional de Investigaciones Nucleares, Km. 36.5 Carretera Mexico-Toluca, Ocoyoacac, Estado de Mexico 52045 (Mexico); Morales, L.B. [UNAM, IIMAS, Ciudad Universitaria, D. F. 04510 (Mexico); Valle, E. del [IPN, ESFM, Unidad Profesional ' Adolfo Lopez Mateos' , Col. Lindavista 07738, D. F. (Mexico)]. e-mail: jacm@nuclear.inin.mx

2004-07-01

The obtained results when implementing the technique of tabu search, for to optimize patterns of control bars in a BWR type reactor, using the CM-PRESTO code are presented. The patterns of control bars were obtained for the designs of fuel reloads obtained in a previous work, using the same technique. The obtained results correspond to a cycle of 18 months using 112 fresh fuels enriched at the 3.53 of U-235. The used technique of tabu search, prohibits recently visited movements, in the position that correspond to the axial positions of the control bars, additionally the tiempo{sub t}abu matrix is used for to manage a size of variable tabu list and the objective function is punished with the frequency of the forbidden movements. The obtained patterns of control bars improve the longitude of the cycle with regard to the reference values and they complete the restrictions of safety. (Author)

Analysis of the uniform augmentation of the flow through the nucleus in the searching process of the patterns of objective control bars in a BWR; Analisis del aumento uniforme del caudal a traves del nucleo en el proceso de busqueda de los patrones de barras de control objetivo en un BWR

Energy Technology Data Exchange (ETDEWEB)

Montes, J.L.; Ortiz, J.J.; Perusquia, R. [ININ, Carretera Mexico-Toluca Km. 36.5, 52045 Estado de Mexico (Mexico)]. e-mail: jlmt@nuclear.inin.mx

2004-07-01

The search of the patterns of control bars (PBCs) in a power reactor of boiling water, requires to investigate a very wide space of solutions, in principle they are had of the order of 3 x 10{sup 152} possible configurations to establish the PBC in a point given before reaching the end of the cycle. This situation suggests to define those restrictions and conditions initial appropriately so that the search converges toward the desirable results. Presently work the results of the search of patterns of bars based on different flow scenarios through the nucleus are presented. The Cycle 10 is analysed (C10) of the Unit One of the Nuclear Power station Laguna Verde (CNLV), which presents an interesting mixture of diverse designs of control bars used in operation to power. The search of the patterns of bars of objective control is carried out applying the GACRP program which is based on the calculation technique known as genetic algorithms. (Author)

Uncertainty and sensitivity analysis methodology in a level-I PSA (Probabilistic Safety Assessment); Analisis de incertidumbres y sensibilidad aen un APS (Analisis Probabilistico de Seguridad) nivel-I

Energy Technology Data Exchange (ETDEWEB)

Nunez McLeod, J E; Rivera, S S [Universidad Nacional de Cuyo, Mendoza (Argentina). Instituto de Capacitacion Especial y Desarrollo de Ingenieria Asistida por Computadora (CEDIAC)

1997-07-01

This work presents a methodology for sensitivity and uncertainty analysis, applicable to a probabilistic safety assessment level I. The work contents are: correct association of distributions to parameters, importance and qualification of expert opinions, generations of samples according to sample sizes, and study of the relationships among system variables and system response. A series of statistical-mathematical techniques are recommended along the development of the analysis methodology, as well different graphical visualization for the control of the study. (author) [Spanish] En este trabajo se presenta una metodologia de analisis de sensibilidad e incertidumbres, aplicable a un analisis probabilistico de seguridad (APS) de nivel I. En el cual se plantea: la adecuada asociacion de distribuciones a variables, la importancia y penalizacion de la opinion de expertos, la generacion de muestras y su tamano, y el estudio de las relaciones entre las variables del sistema y la respuesta de este. Ademas durante el desarrollo de la metodologia de analisis se recomiendan una serie de tecnicas estadistico-matematicas y tipos de visualizacion grafica para el control del estudio. (autor)

Impact on the bar value in hot by the introduction of advanced control bars in the Unit 1 of the Laguna Verde Nuclear power plant; Impacto sobre el valor de barra en caliente por la introduccion de barras de control avanzadas en la U1 de la CNLV

Energy Technology Data Exchange (ETDEWEB)

Montes, J.L.; Perusquia, R.; Ortiz, J.J.; Hernandez, J.L.; Ramirez, J.R. [ININ, Carretera Mexico-Toluca Km. 36.5, 52045 Estado de Mexico (Mexico)]. e-mail: jlmt@nuclear.inin.mx

2004-07-01

In recent dates the Laguna Verde Nuclear Power station (CNLV) has acquired new designs of control bars, this new type of bars presents modifications important in their design. For what is important to analyze their performance inside those reactors of this nuclear power station. Presently work is shown the behavior of the nucleus of the reactor in hot condition (HFP) when three different types of control bar are used. The first of them corresponds the one that initially has been used in this power station and that we will call original. The second type of control bars, it corresponds to an advanced type and it is the first design different from the original and it corresponds to a bar design that it includes Hafnium (Hf) like one of their neutronic absorption characteristics. The third, denoted as 2AV, include besides the material of the second type new design characteristics, and it is the last finish bar type that it has been introduced in the operation of the reactors of the CNLV. With base in the studied cases is found that the bars 2AV have a total power value, 7.6 % bigger respect the bars 1AV; and in turn the bars 1AV, 6.1 % bigger with respect the ORG control bars. (Author)

New Design for the Inductive Position Sensor of the CAREM Reactor Control Bars

International Nuclear Information System (INIS)

Esparza, Daniel; D'Ovidio, Claudio; Taglialavore, Eduardo

2000-01-01

We describe the new design of the sensor used for determining the position of the control bars in the CAREM reactor.It presently operates under real 'cold' conditions, being under progress the final selection of materials for operation under the 'hot' condition of the reactor.The actual design is a modification of the previous one and is based on the same principle.A solenoid is placed on the outer side of the mechanism that moves the control bar, which has some part made of a magnetic material, and the variation of an electrical property of the bobbin with the movement of this magnetic piece is studied.This new design was proposed both to increase the output voltage and simplify the electronics and construction of the sensor.The output voltage is lineal with the bar position, with a correlation coefficient R = 0.9997, a sensibility of 43 % and a resolution better than 1 in 1000.The output sensibility was improved in almost three orders of magnitude, from 1.204 μV/mm to 0.924 mV/mm. Considering that the typical electric noise was ±1 mV RMS, we are able to measure the mm in the total bar excursion of 1400 mm. It is to be noticed that we obtained a resolution 10 times higher than the required: half step of the mechanism, that is ±10 mm. Both the employed electronics and the bobbin construction were markedly simplified

The BaBar Data Reconstruction Control System

International Nuclear Information System (INIS)

Ceseracciu, A

2005-01-01

The BaBar experiment is characterized by extremely high luminosity and very large volume of data produced and stored, with increasing computing requirements each year. To fulfill these requirements a Control System has been designed and developed for the offline distributed data reconstruction system. The control system described in this paper provides the performance and flexibility needed to manage a large number of small computing farms, and takes full benefit of OO design. The infrastructure is well isolated from the processing layer, it is generic and flexible, based on a light framework providing message passing and cooperative multitasking. The system is distributed in a hierarchical way: the top-level system is organized in farms, farms in services, and services in subservices or code modules. It provides a powerful Finite State Machine framework to describe custom processing models in a simple regular language. This paper describes the design and evolution of this control system, currently in use at SLAC and Padova on ∼450 CPUs organized in 9 farms

Unit-bar migration and bar-trough deposition: impacts on hydraulic conductivity and grain size heterogeneity in a sandy streambed

Science.gov (United States)

Korus, Jesse T.; Gilmore, Troy E.; Waszgis, Michele M.; Mittelstet, Aaron R.

2018-03-01

The hydrologic function of riverbeds is greatly dependent upon the spatiotemporal distribution of hydraulic conductivity and grain size. Vertical hydraulic conductivity ( K v) is highly variable in space and time, and controls the rate of stream-aquifer interaction. Links between sedimentary processes, deposits, and K v heterogeneity have not been well established from field studies. Unit bars are building blocks of fluvial deposits and are key to understanding controls on heterogeneity. This study links unit bar migration to K v and grain size variability in a sand-dominated, low-sinuosity stream in Nebraska (USA) during a single 10-day hydrologic event. An incipient bar formed parallel to the thalweg and was highly permeable and homogenous. During high flow, this bar was submerged under 10-20 cm of water and migrated 100 m downstream and toward the channel margin, where it became markedly heterogeneous. Low- K v zones formed in the subsequent heterogeneous bar downstream of the original 15-40-cm-thick bar front and past abandoned bridge pilings. These low- K v zones correspond to a discontinuous 1-cm layer of fine sand and silt deposited in the bar trough. Findings show that K v heterogeneity relates chiefly to the deposition of suspended materials in low-velocity zones downstream of the bar and obstructions, and to their subsequent burial by migration of the bar during high flow. Deposition of the unit bar itself, although it emplaced the vast majority of the sediment volume, was secondary to bar-trough deposition as a control on the overall pattern of heterogeneity.

49 CFR 236.705 - Bar, locking.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Bar, locking. 236.705 Section 236.705..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.705 Bar, locking. A bar in an interlocking machine to which the locking dogs are attached. ...

Analisis Harmonisa Inverter PWM Satu Fasa

OpenAIRE

Rejeki Simanjorang

2008-01-01

Pada tesis ini dianalisis harmonisa inverter PWM satu fasa. Inverter PWM satu fasa yang akan ditinjau adalah inverter satu fasa jembatan penuh (konvensional) dan inverter komposit. Analisis difokuskan pada penentuan pola penyaklaran yang optimum agar pembangkitan harmonisa dan switching losses inverter rendah. Untuk menentukan pola penyaklaran optimum maka dilakukan analisis yang berbasis pada rangkaian ekivalen harmonisa inverter satu fasa. Dengan menggunakan pola penyaklaran optimum, kedua ...

ANALISIS PENYEBAB BANJIR KALI JUANA

Directory of Open Access Journals (Sweden)

Teguh Marhendi

2017-04-01

Full Text Available Kali Juana yang berada di Kabupaten Pati dan Kudus serta sebagian kecil di Kabupaten Grobogan dan Blora, merupakan kawasan banjir. Kejadian banjir di Kali Juana, sudah menjadi rutinitas setiap musim hujan.Dari Januari sampai bulan Mei 2016tercatat terjadi 11 kejadian banjir dibeberapa wilayah, seperti Kecamatan Kaliwungu, Undaan dan Mejobo (Kab. Kudus serta Pati, Margorejo dan Juwana (Kab. Pati. Kali Juana merupakan bifurkasi Kali Serang pada Pintu Wilalung, yang berfungsi sebagai pintu pengatur banjir (dibangun pada zaman Belanda tahun 1918, melalui Kali Babalan menuju ke Kali Juana. Tulisan inidimaksudkan untuk menganalisis penyebab kejadian banjir di Kali Juana. Analisis dilakukan dengan melakukan kajani dan analisis hujan serta mekanisme aliran. Hasil analisis menunjukkan bahwa kondisi Kali Juana dari pertemuan Kali Logung di pintu Wilalung sampai hilir telah mengalami pendangkalan akibat kemiringan dasar atau topografi yang landai, dan mengakibatkan mudah terjadi sedimentasi sehingga mengurangi kapasitas pengaliran. Hal ini menyebabkan luapan banjir sering menggenangi wilayah Kabupaten Kudus dan Pati.

Analisi matematica

CERN Document Server

Canuto, Claudio

2014-01-01

Il presente testo intende essere di supporto ad un secondo insegnamento di Analisi Matematica in quei corsi di studio (quali ad esempio Ingegneria, Informatica, Fisica) in cui lo strumento matematico parte significativa della formazione dell'allievo. I concetti e i metodi fondamentali del calcolo differenziale ed integrale in più variabili, le serie di funzioni e le equazioni differenziali ordinarie sono presentati con l'obiettivo primario di addestrare lo studente ad un loro uso operativo, ma critico. L'impostazione didattica dell'opera ricalca quella usata nel testo parallelo di Analisi Matematica I. La modalità di presentazione degli argomenti ne permette un uso flessibile e modulare. Lo stile adottato privilegia la chiarezza e la linearità dell'esposizione. Il testo organizzato su due livelli di lettura. Uno, più essenziale, permette allo studente di cogliere i concetti indispensabili della materia, di familiarizzarsi con le relative tecniche di calcolo e di trovare le giustificazioni dei principali r...

Use of hafnium in control bars of nuclear reactors; Uso de hafnio en barras de control de reactores nucleares

Energy Technology Data Exchange (ETDEWEB)

Ramirez S, J.R.; Alonso V, G. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: jrrs@nuclear.inin-mx

2003-07-01

Recently the use of hafnium as neutron absorber material in nuclear reactors has been reason of investigation by virtue of that this material has nuclear properties as to the neutrons absorption and structural that can prolong the useful life of the control mechanisms of the nuclear reactors. In this work some of those more significant hafnium properties are presented like nuclear material. Also there are presented calculations carried out with the HELIOS code for fuel cells of uranium oxide and of uranium and plutonium mixed oxides under controlled conditions with conventional bars of boron carbide and also with similar bars to which are substituted the absorbent material by metallic hafnium, the results are presented in this work. (Author)

Improving the Security and Performance of the BaBar Detector Controls System

International Nuclear Information System (INIS)

Kotturi, Karen D.

2003-01-01

It starts out innocently enough--users want to monitor Online data and so run their own copies of the detector control GUIs in their offices and at home. But over time, the number of processes making requests for values to display on GUIs, webpages and stripcharts can grow, and affect the performance of an Input/Output Controller (IOC) such that it is unable to respond to requests from requests critical to data-taking. At worst, an IOC can hang, its CPU having been allocated 100% to responding to network requests. For the BaBar Online Detector Control System, we were able to eliminate this problem and make great gains in security by moving all of the IOCs to a non-routed, virtual LAN and by enlisting a workstation with two network interface cards to act as the interface between the virtual LAN and the public BaBar network. On the interface machine, we run the Experimental Physics Industrial Control System (EPICS) Channel Access (CA) gateway software (originating from Advanced Photon Source). This software accepts as inputs, all the channels which are loaded into the EPICS databases on all the IOCs. It polls them to update its copy of the values. It answers requests from applications by sending them the currently cached value. We adopted the requirement that data-taking would be independent of the gateway, so that, in the event of a gateway failure, data-taking would be uninterrupted. In this way, we avoided introducing any new risk elements to data-taking. Security rules already in use by the IOC were propagated to the gateway's own security rules and the security of the IOCs themselves was improved by removing them from the public BaBar network

The New BaBar Data Reconstruction Control System

International Nuclear Information System (INIS)

Ceseracciu, Antonio

2003-01-01

The BaBar experiment is characterized by extremely high luminosity, a complex detector, and a huge data volume, with increasing requirements each year. To fulfill these requirements a new control system has been designed and developed for the offline data reconstruction system. The new control system described in this paper provides the performance and flexibility needed to manage a large number of small computing farms, and takes full benefit of OO design. The infrastructure is well isolated from the processing layer, it is generic and flexible, based on a light framework providing message passing and cooperative multitasking. The system is actively distributed, enforces the separation between different processing tiers by using different naming domains, and glues them together by dedicated brokers. It provides a powerful Finite State Machine framework to describe custom processing models in a simple regular language. This paper describes this new control system, currently in use at SLAC and Padova on ∼450 CPUs organized in 12 farms

ANALISIS VARIABILITAS CURAH HUJAN DAN SUHU DI BALI

Directory of Open Access Journals (Sweden)

Ogi Setiawan

2017-01-01

Full Text Available Indonesia sebagai negara kepulauan yang terdiri dari pulau-pulau besar dan kecil menjadi sangat rentan terhadap dampak perubahan iklim. Salah satu pulau yang juga rentan terhadap perubahan iklim adalah pulau Bali. Dampak potensial adanya perubahan iklim adalah perubahan pola hujan, peningkatan suhuudaradankenaikanpermukaanlaut. Sektoryangakanmenerimadampakperubahaniklimdengan serius adalah sektor kehutanan dan pertanian. Untuk mendukung upaya mitigasi dan adaptasi maka diperlukan informasi perubahan iklim yang terjadi. Penelitian ini bertujuan untuk mengetahui variabilitas iklim di Bali. Metode yang digunakan adalah analisis kecenderungan curah hujan, analisis perubahan suhu udara, analisis perubahan tipe iklim dan analisis pergeseran bulan basah, lembab dan kering. Data hujan yang digunakan adalah data hujan dari GPCC (1961-1998 dan BMKG Bali (19992008, sedangkan data suhu berasal dari BMKG Bali (2004-2008. Hasil analisis menunjukkan bahwa di pulau Bali secara umum sudah mengalami perubahan iklim. Tipe iklim berdasarkan Schmidt-Ferguson mengalami perubahan dari relatif basah menjadi agak kering. Suhu udara rata-rata bulanan serta curah hujan bulanan dan tahunan memiliki kecenderungan yang semakin meningkat. Bulan basah dan bulan kering telah mengalami pergeseran dan perubahan jumlahnya. Dampak perubahan iklim terhadap ekosistem hutan di Bali belum diketahui dengan pasti, namun terdapat beberapa implikasi perubahan iklim terhadap sektor kehutanan diantaranya kebakaran hutan dan perubahan jadwal penanaman.

A Coincidence Detection Mechanism Controls PX-BAR Domain-Mediated Endocytic Membrane Remodeling via an Allosteric Structural Switch.

Science.gov (United States)

Lo, Wen-Ting; Vujičić Žagar, Andreja; Gerth, Fabian; Lehmann, Martin; Puchkov, Dymtro; Krylova, Oxana; Freund, Christian; Scapozza, Leonardo; Vadas, Oscar; Haucke, Volker

2017-11-20

Clathrin-mediated endocytosis occurs by bending and remodeling of the membrane underneath the coat. Bin-amphiphysin-rvs (BAR) domain proteins are crucial for endocytic membrane remodeling, but how their activity is spatiotemporally controlled is largely unknown. We demonstrate that the membrane remodeling activity of sorting nexin 9 (SNX9), a late-acting endocytic PX-BAR domain protein required for constriction of U-shaped endocytic intermediates, is controlled by an allosteric structural switch involving coincident detection of the clathrin adaptor AP2 and phosphatidylinositol-3,4-bisphosphate (PI(3,4)P 2 ) at endocytic sites. Structural, biochemical, and cell biological data show that SNX9 is autoinhibited in solution. Binding to PI(3,4)P 2 via its PX-BAR domain, and concomitant association with AP2 via sequences in the linker region, releases SNX9 autoinhibitory contacts to enable membrane constriction. Our results reveal a mechanism for restricting the latent membrane remodeling activity of BAR domain proteins to allow spatiotemporal coupling of membrane constriction to the progression of the endocytic pathway. Copyright © 2017 Elsevier Inc. All rights reserved.

ANALISIS POSITIONING RESTORAN CEPAT SAJI

Directory of Open Access Journals (Sweden)

Osa Omar Sharif

2017-04-01

Full Text Available Penelitian ini bertujuan untuk meneliti positioning restoran cepat saji McDonald's, Kentucky Fried Chicken, California Fried Chicken, A&W, dan Texas Chicken. Penelitian dilakukan di Kota Bandung dengan mengambil sebanyak 400 responden. Analisis yang digunakan dalam penelitian ini adalah analisis multidimensional scaling, analisis memberikan gambaran positioning dari restoran cepat saji yang ditampilkan dalam perceptual map. Restoran cepat saji yang memiliki layanan paling baik adalah McD dan yang memiliki layanan paling buruk adalah CFC. Restoran cepat saji yang memiliki rasa makanan paling enak adalah McD dan yang memiliki rasa makanan tidak enak adalah CFC. KFC dinilai paling ideal karena selalu berhasil menduduki peringkat satu dan dua jika dilihat dari sudut pandang restoran cepat saji yang lain. Pesaing terdekat McD adalah KFC. McD mendapatkan ranking pertama dari segi atribut layanan, kebersihan, variasi makanan, dan rasa makanan. Dengan posisi seperti ini McD seharusnya tetap menjaga kualitas layanan, kebersihan, variasi makanan, dan rasa makanan agar konsumen tetap memilih untuk datang ke McD. KFC sebaiknya tetap menjaga suasana yang membuat konsumen nyaman akan suasana di dalam atau diluar restoran

The efficacy of daily snack replacement with oligofructose-enriched granola bars in overweight and obese adults: a 12-week randomised controlled trial.

Science.gov (United States)

Pol, Korrie; de Graaf, Cees; Meyer, Diederick; Mars, Monica

2018-05-01

Oligofructose is a prebiotic dietary fibre obtained from chicory root inulin. Oligofructose supplementation may affect satiety, food intake, body weight and/or body composition. The aim was to examine the efficacy of oligofructose-supplemented granola bars on the following weight management outcomes: satiety, energy intake, body weight and body composition in overweight or obese adults. In all, fifty-five adults with overweight or obesity (thirty-six females/nineteen males; age: 41 (sd 12) years; 90·6 (sd 11·8) kg; BMI: 29·4 (sd 2·6) kg/m2) participated in a parallel, triple-blind, placebo-controlled intervention. A total of twenty-nine subjects replaced their snacks twice a day with an equienergetic granola bar supplemented with 8 g of oligofructose (OF-Bar). Subjects in the control group (n 26) replaced their snack with a control granola bar without added oligofructose (Co-Bar). Satiety, 24-h energy intake, body weight and body composition (fat mass and waist circumference) were measured at baseline, weeks 6 and 12. In addition, weekly appetite and gastrointestinal side effects were measured. During the intervention, energy intake, body weight and fat mass remained similar in the Co-Bar and OF-Bar groups (all P>0·05). Both groups lost 0·3 (sd 1·2) kg lean mass (P<0·01) and reduced their waist circumference with -2·2 (sd 3·6) cm (P<0·0001) after 12 weeks. The OF-Bar group reported decreased hunger in later weeks of the intervention (P=0·04), less prospective food consumption (P=0·03) and less thirst (P=0·003). To conclude, replacing daily snacks for 12 weeks with oligofructose-supplemented granola bars does not differentially affect energy intake, body weight and body composition compared with a control bar. However, there was an indication that appetite was lower after oligofructose bar consumption.

AE$\\mathrm{\\bar{g}}$IS Experiment Positron Accumulator: Optimization and Control

CERN Document Server

Moura, Joao Pedro

2013-01-01

The present document describes my 8-week work project at the AE$\\mathrm{\\bar{g}}$IS experiment. The project can be divided into three main tasks: 1. Theoretical preparation; 2. Support at the experiment; and 3. Control of the ES075-2 Power Supply. A description of these tasks is presented. Special emphasis is put on the third task and further developments are proposed.

IDENTIFIKASI MISKONSEPSI SISWA SMP PADA KONSEP FOTOSINTESIS MELALUI ANALISIS GAMBAR

Directory of Open Access Journals (Sweden)

Devi Ariandini

2014-01-01

Full Text Available Tujuan dari penelitian ini adalah untuk mengidentifikasi miskonsepsi siswa dengan analisis menggambar. Tiga puluh empat siswa di kelas 8 di sekolah menengah pertama digunakan sebagai subyek dalam penelitian ini. Teknik sampel menggunakan teknik purposive sampling. Data yang diperlukan untuk penelitian ini dikumpulkan melalui kuesioner, menggambar analisis rubrik, dan wawancara. Identifikasi Kesalahpahaman ditentukan dengan menggambar siswa berdasarkan menggambar kriteria klasifikasi oleh Kose (2008. Siswa diperintahkan untuk menarik tentang konsep fotosintesis setelah proses pembelajaran. Gambar siswa dianalisis dengan rubrik dan setelah itu mereka diwawancarai. Hasil penelitian menunjukkan tidak semua tingkat kriteria menggambar dari tingkat 1 sampai 5 diidentifikasi. Dari hasil analisa, gambar paling banyak ditemukan adalah pada tingkat 4. Gambar pada tingkat 4 dikategorikan sebagai gambar lengkap konsep fotosintesis dan tidak ada kesalahpahaman ditemukan. Berdasarkan gambar mereka, ada siswa 2,9% diidentifikasi yang diselenggarakan kesalahpahaman. Ada perbedaan jumlah siswa yang diadakan kesalahpahaman antara gambar hasil analisis dan hasil wawancara. Dari hasil wawancara, ada siswa 35,2% dimiliki kesalahpahaman, lebih dari menggambar hasil analisis. Ini berarti bahwa identifikasi kesalahpahaman melalui analisis gambar tidak efektif. Kesalahpahaman siswa yang paling sering terjadi pada konsep fotosintesis adalah tempat berlangsungnya fotosintesis. Faktor yang membuat kesalahpahaman siswa yaitu karena siswa itu sendiri dan lingkungannya. Kata Kunci: fotosintesis, kesalahpahaman, konsep, menggambar analisis

Adherence to the Tobacco Control Act, 2007: presence of a workplace policy on tobacco use in bars and restaurants in Nairobi, Kenya.

Science.gov (United States)

Karimi, K J; Ayah, R; Olewe, T

2016-09-28

Despite extensive knowledge about effective tobacco control interventions, the prevalence of tobacco use in many middle- and low-income countries continues to rise. In these countries, public appreciation of levels of protection provided by laws and regulations on tobacco use and exposure to tobacco smoke is limited. After ratification of the Framework Convention on Tobacco Control, Kenya enacted the Tobacco Control Act, 2007, banning smoking in public places except in designated smoking areas. To assess adherence to the Tobacco Control Act, 2007 by determining the presence of a workplace policy on tobacco use in bars and restaurants. A survey of 176 liquor licensed bars and restaurants in Nairobi County was carried out. Their managers were asked about the presence of a workplace policy governing smoking of tobacco, and observations made on provisions that determine adherence to the Tobacco Control Act, 2007. Smoking took place in almost all bars and restaurants (150 (85%)). Half the establishments (86 (49%)) had a workplace policy governing tobacco use among employees, although a difference between bars (11 (23%)) and restaurants (75 (58%)) was recorded (pworkplace policy (p<0.001) and less likely to have 'no smoking' signs and designated smoking areas (p<0.005). Kenya's implementation of the Tobacco Control Act, 2007 does not provide sufficient protection of patrons and workers in bars and restaurants. It is important to sensitise hospitality workers to the dangers of tobacco smoke. Bar and restaurants managers should have a minimum post-secondary education level. The Tobacco Control Act, 2007 requires strengthening to ensure that bars and restaurants have a smoke-free environment. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

CP asymmetries in B-bar → K-bar *( → K-bar π) l-bar l and untagged B-bar s, Bs → φ( → K+K-) l-bar l decays at NLO

International Nuclear Information System (INIS)

Bobeth, Christoph; Hiller, Gudrun; Piranishvili, Giorgi

2008-01-01

The decay B-bar → K-bar *( → K-bar π) l-bar l offers great opportunities to explore the physics at and above the electroweak scale by means of an angular analysis. We investigate the physics potential of the seven CP asymmetries plus the asymmetry in the rate, working at low dilepton mass using QCD factorization at next-to leading order (NLO). The b → s CP asymmetries are doubly Cabibbo-suppressed ∼ d , B d → K*( → K 0 π 0 ) l-bar l and B-bar s , B s → φ( → K + K - ) l-bar l decays. Analyses of these CP asymmetries can rule out, or further support the minimal description of CP violation through the CKM mechanism. Experimental studies are promising for (super) flavor factories and at hadron colliders.

Study of the reactions $\\bar{p}p \\rightarrow \\bar{\\Lambda} \\Lambda , \\bar{\\Lambda} \\Sigma^{0}$ or $\\bar{\\Sigma^{0}} \\Lambda , \\bar{\\Sigma^{+}} \\Sigma^{+}$ at 3.6 GeV/c

CERN Document Server

Atherton, Henry W; Moebes, J P; Quercigh, Emanuele

1974-01-01

The reactions $\\bar{p}p \\rightarrow \\bar{\\Lambda} \\Lambda , \\bar{\\Lambda} \\Sigma^{0}$ or $\\bar{\\Sigma^{0}} \\Lambda , \\bar{\\Sigma^{+}} \\Sigma^{+}$ are studied at an incident momentum of 3.6 GeV/c in a 35.4 event/$\\mu$ b experiment performed in the CERN 2m HBC. Total and differential cross sections are presented. The polarization of the hyperons is measured as a function of $t$ and for the reaction $\\bar{p}p \\rightarrow \\bar{\\Lambda} \\Lambda$ the complete spin correlation matrix is given. (23 refs).

The Possible Heavy Tetraquarks $qQ\\bar q \\bar Q$, $qq\\bar Q \\bar Q$ and $qQ\\bar Q \\bar Q$

OpenAIRE

Cui, Ying; Chen, Xiao-Lin; Deng, Wei-Zhen; Zhu, Shi-Lin

2006-01-01

Assuming X(3872) is a $qc \\bar q \\bar c$ tetraquark and using its mass as input, we perform a schematic study of the masses of possible heavy tetraquarks using the color-magnetic interaction with the flavor symmetry breaking corrections.

Change of mechanisms of control bars, an activity of high performance in the twelve recharge of the Unit 1

International Nuclear Information System (INIS)

Serrano R, H.

2007-01-01

One of the activities that are carried out during the fuel loading stage in the reactors of the Laguna Verde Power station (CNLV), it is the change of the control bar mechanisms (CRDs); the importance of giving maintenance to these mechanisms of control bars is that they should be reliable during the reactor operation. The insert of the control bars at one time of less than 7 seconds, it is the time required to carry out a sure reactor shutdown either of automatic way or manual by the operator action this insert of the control bars is through the CRDs that work them completely to insert negative reactivity to the reactor core. In this insert of the bars the neutrons are absorbed that maintain the reaction of self-sustained fission. The neutron absorber material in the control bars is a mixture of boron-gadolinium. It is also through the extraction of control bars like the fission reaction is controlled by means of the neutron density in the core. Extracting the control bars in form controlled by the operator is known as positive reactivity. This activity, that of the change of CRDs can only be carried out in the reload stage, that is to say, when the reactor is out one. The complexity of carrying out the change of those CRDs by its complexity as for radiological support that it demands, has taken to that the involved personnel acquires an experience and ability that it has allowed it to have a high performance. The importance of having this experience and ability, in the following generations, is fundamental for the CNLV, since that it requires to account with personal properly prepared, taking into account that the Safety is our maximum priority. The use of ALARA tools like devices with extension to maintain the distance of the source are key to optimize the personnel's dose; it is also key the support tools of the last technologies like the tele dosimetry, the television closed circuit (CCTV), the bubble suits for the extraction of the CRDs by the inferior part

Enhancing roll stability of heavy vehicle by LQR active anti-roll bar control using electronic servo-valve hydraulic actuators

Science.gov (United States)

Vu, Van Tan; Sename, Olivier; Dugard, Luc; Gaspar, Peter

2017-09-01

Rollover of heavy vehicle is an important road safety problem world-wide. Although rollovers are relatively rare events, they are usually deadly accidents when they occur. The roll stability loss is the main cause of rollover accidents in which heavy vehicles are involved. In order to improve the roll stability, most of modern heavy vehicles are equipped with passive anti-roll bars to reduce roll motion during cornering or riding on uneven roads. However these may be not sufficient to overcome critical situations. This paper introduces the active anti-roll bars made of four electronic servo-valve hydraulic actuators, which are modelled and integrated in a yaw-roll model of a single unit heavy vehicle. The control signal is the current entering the electronic servo-valve and the output is the force generated by the hydraulic actuator. The active control design is achieved solving a linear optimal control problem based on the linear quadratic regulator (LQR) approach. A comparison of several LQR controllers is provided to allow for tackling the considered multi-objective problems. Simulation results in frequency and time domains show that the use of two active anti-roll bars (front and rear axles) drastically improves the roll stability of the single unit heavy vehicle compared with the passive anti-roll bar.

Analisis Keandalan Struktur Padeye Berdasarkan Konfigurasi Rigging pada Lifting Upper Deck Modul Modec dengan Pendekatan Dinamik

Directory of Open Access Journals (Sweden)

Iqbal Gayuh Raharjaning Mukti Sumarsono

2017-01-01

Full Text Available Di dalam perusahaan yang bergerak dalam bidang fabrikasi, lifting merupakan salah satu tahapan terpenting dalam membangun bangunan lepas pantai sehingga diperlukan perhitungan dan analisis tambahan untuk memperhatikan apakah struktur tersebut aman ataupun tidak. Sekenario lifting berdasarkan konfigurasi rigging dapat dibuat untuk menentukan rigging equipment yang tepat. Pada kasus ini, struktur yang di-lifting adalah struktur upper deck dari modul MODEC yang dikerjakan oleh PT. GPS Batam. Deck ini memiliki panjang sekitar 19,5 m dan lebar 9 m. Berat total struktur dengan equipment sebesar 55 ton. Konfigurasi rigging yang akan digunakan ada tiga, yaitu Model A (tanpa spreader bar, Model B (satu spreader bar, dan Model C (dua spreader bar. Dari ketiga konfigurasi tersebut akan diperoleh dimensi padeye yang berbeda- beda. Model A, Model B, dan Model C memiliki diameter hole padeye masing-masing sebesar 74 mm, 65 mm, dan 52 mm. Tegangan dan UC tertinggi sama- sama terjadi pada Model A sebesar 17625,99 psi dan untuk UC sebesar 0,52. Tetapi hal ini berbanding terbalik apabila ditinjau dari daerah lubang. Tegangan ataupun UC yang lebih tinggi jatuh pada Model C yang menggunakan dua spreader bar sebesar 13936,58 psi dan nilai UC sebesar 0,45. Tegangan yang terjadi di attachments maupun sekitar hole dijadikan variabel dalam mencari keandalan yang terjadi pada tiap padeye dengan metode Mean value first order second moment (MVFOSM. Sehingga didapatkan Probality of Failure (PoF pada attachments padeye pada Model A, B, dan C masing- masing sebesar 0,126%, 0,064 %, dan 0,0001 %. Sedangkan PoF pada hole padeye sebesar 0,062% untuk Model A, 0,10 % untuk Model B, dan 0,23% untuk Model C.

Bar code usage in nuclear materials accountability

International Nuclear Information System (INIS)

Mee, W.T.

1983-01-01

The Oak Ridge Y-12 Plant began investigating the use of automated data collection devices in 1979. At this time, bar code and optical-character-recognition (OCR) systems were reviewed with the purpose of directly entering data into DYMCAS (Dynamic Special Nuclear Materials Control and Accountability System). Both of these systems appeared applicable, however, other automated devices already employed for production control made implementing the bar code and OCR seem improbable. However, the DYMCAS was placed on line for nuclear material accountability, a decision was made to consider the bar code for physical inventory listings. For the past several months a development program has been underway to use a bar code device to collect and input data to the DYMCAS on the uranium recovery operations. Programs have been completed and tested, and are being employed to ensure that data will be compatible and useful. Bar code implementation and expansion of its use for all nuclear material inventory activity in Y-12 is presented

Analisis Tingkat Kepentingan Dan Kinerja Layanan Automated Teller Machine (Atm) Bank Mandiri

OpenAIRE

Setiawati, Lenny; Sugiharto, Toto

2008-01-01

Penelitian ini ditujukan untuk menganalisis tingkat kepentingan dan kinerja layananATM Bank Mandiri. Analisis Servqual yang terdiri atas dimensi tangible, realibility,responsiveness, assurance,dan empathy digunakan untuk menganalisis kinerjalayanan ATM. Sementara itu, Customer Satisfaction Index dan ImportancePerformance Analysis yang terdiri atas analisis kuadran dan analisis kesenjangandigunakan untuk menginvestigasi kepuasan pelanggan dan untuk mengidentifikasikandimensi layanan yang kiner...

Triply heavy tetraquark states with the $QQ\\bar{Q}\\bar{q}$ configuration

OpenAIRE

Chen, Kan; Liu, Xiang; Wu, Jing; Liu, Yan-Rui; Zhu, Shi-Lin

2016-01-01

In the framework of the color-magnetic interaction, we systematically investigate the mass splittings of the $QQ\\bar{Q}\\bar{q}$ tetraquark states and estimated their rough masses in this work. These systems include the explicitly exotic states $cc\\bar{b}\\bar{q}$ and $bb\\bar{c}\\bar{q}$ and the hidden exotic states $cc\\bar{c}\\bar{q}$, $cb\\bar{b}\\bar{q}$, $bc\\bar{c}\\bar{q}$, and $bb\\bar{b}\\bar{q}$. If a state around the estimated mass region could be observed, its nature as a genuine tetraquark ...

ANALISIS KESELAMATAN TERMOHIDROLIK BULK SHIELDING REAKTOR KARTINI

Directory of Open Access Journals (Sweden)

Azizul Khakim

2015-10-01

Full Text Available ABSTRAK ANALISIS KESELAMATAN TERMOHIDROLIK BULK SHIELDING REAKTOR KARTINI. Bulk shielding merupakan fasilitas yang terintegrasi dengan reaktor Kartini yang berfungsi sebagai penyimpanan sementara bahan bakar bekas. Fasilitas ini merupakan fasilitas yang termasuk dalam struktur, sistem dan komponen (SSK yang penting bagi keselamatan. Salah satu fungsi keselamatan dari sistem penanganan dan penyimpanan bahan bakar adalah mencegah kecelakaan kekritisan yang tak terkendali dan membatasi naiknya temperatur bahan bakar. Analisis keselamatan paling kurang harus mencakup analisis keselamatan dari sisi neutronik dan termo hidrolik Bulk shielding. Analisis termo hidrolik ditujukan untuk memastikan perpindahan panas dan proses pendinginan bahan bakar bekas berjalan baik dan tidak terjadi akumulasi panas yang mengancam integritas bahan bakar. Code tervalidasi PARET/ANL digunakan untuk analisis pendinginan dengan mode konveksi alam. Hasil perhitungan menunjukkan bahwa mode pendinginan konvekasi alam cukup memadai dalam mendinginkan panas sisa tanpa mengakibatkan kenaikan temperatur bahan bakar yang signifikan. Kata kunci: Bulk shielding, bahan bakar bekas, konveksi alam, PARET.   ABSTRACT THERMAL HYDRAULIC SAFETY ANALYSIS OF BULK SHIELDING KARTINI REACTOR. Bulk shielding is an integrated facility to Kartini reactor which is used for temporary spent fuels storage. The facility is one of the structures, systems and components (SSCs important to safety. Among the safety functions of fuel handling and storage are to prevent any uncontrolable criticality accidents and to limit the fuel temperature increase. Safety analyses should, at least, cover neutronic and thermal hydraulic calculations of the bulk shielding. Thermal hydraulic analyses were intended to ensure that heat removal and the process of the spent fuels cooling takes place adequately and no heat accumulation that challenges the fuel integrity. Validated code, PARET/ANL was used for analysing the

Analisis Semiotik Sajak Bulang Cahaya

Directory of Open Access Journals (Sweden)

Junaidi Junaidi

2014-11-01

Full Text Available Penelitian ini bertujuan menggali makna tanda yang terdapat dalam sajak Bulang Cahaya karya Rida K Liamsi. Untuk menggali makna itu, pendekatan analisis semiotik Roland Barthes digunakan. Hasil penelitian menunjukkan bahwa sajak ini berisi tanda-tanda bersumber dari kosa kata Melayu lama. Sajak ini juga berisi simbol-simbol yang berkaitan dengan kehidupan orang Melayu. Penggunaan kata-kata Melayu lama dan simbol Melayu memperkuat setting Melayu dalam sajak ini. Analisis makna menunjukkan bahwa seseorang merasakan kedukaan sangat mendalam ketika cintanya harus berakhir, tetapi ia terus merasakan kerinduan dengan kekasihnya yang telah pergi. Mitos cinta yang terdapat dalam pusinya adalah orang tahu bahwa putus cinta itu menyakitkan tetapi orang tetap saja jatuh cinta.

Analisis Safety System dan Manajemen Risiko pada Steam Boiler PLTU di Unit 5 Pembangkitan Paiton, PT. YTL

Directory of Open Access Journals (Sweden)

Luluk Kristianingsih

2013-09-01

Full Text Available Pembangkit listrik tenaga uap (PLTU merupakan pembangkit listrik yang banyak digunakan di Indonesia. Salah satu bagian dari sistem PLTU yang memiliki risiko bahaya tinggi adalah boiler, oleh karena itu diperlukan adanya analisis bahaya dan safety system sebagai langkah pencegahan bahaya pada boiler. Analisis bahaya dalam penelitian ini dilakukan menggunakan metode HAZOP. Node yang dipakai adalah economizer, steam drum, superheater, dan reheater yang merupakan komponen utama penyusun boiler. Guide word dan deviasi ditentukan berdasarkan control chart yang dibentuk oleh data proses masing-masing komponen selama bulan Maret 2013. Estimasi likelihood dilakukan berdasarkan data maintenance dari work order PT YTL selama 5 tahun, sedangkan estimasi consequences dilakukan berdasarkan kriteria risiko yang ditimbulkan serta berdasarkan control chart. Hasil perkalian likelihood dan consequences dengan risk matrix menghasilkan kriteria risiko dari komponen. Berdasarkan hasil analisis, diperoleh hasil bahwa komponen yang memiliki risiko bahaya paling besar adalah level transmitter steam drum dengan deviasi berupa less level, yaitu dengan kriteria likelihood adalah A dan consequences 4, sehingga risiko bernilai extreme. Selain itu, risiko extreme juga terdapat pada pressure transmitter outlet superheater, dengan likelihood B dan consequences 4. Untuk menurunkan risiko, maka dilakukan perawatan dan kalibrasi secara rutin, serta penambahan redundant transmitter. Bahaya paling besar pada seluruh node adalah adanya kebakaran. Oleh karena itu, dilakukan analisis emergency response plan untuk kebakaran yang mencakup peta evakuasi, tugas dan tanggungjawab tiap personel, langkah pencegahan, serta langkah penanganan.

Uso de Analisis de Covarianza (ANCOVA en investigacion cientifica.

Directory of Open Access Journals (Sweden)

Badii, M.H.

2008-01-01

Full Text Available The basics of the ANalisis of COVAriance (ANCOVA are given. The objectives and the application of ANCOVA are laid out. Techniques for the estimation of contrasts and for the control and reduction of the degree of error are discussed. The application of a simple ANCOVA using real data is highlighted. The application of this technique in fixing the auxiliary variable in experimentation is emphasized.

The effects of parameter estimation on minimizing the in-control average sample size for the double sampling X bar chart

Directory of Open Access Journals (Sweden)

Michael B.C. Khoo

2013-11-01

Full Text Available The double sampling (DS X bar chart, one of the most widely-used charting methods, is superior for detecting small and moderate shifts in the process mean. In a right skewed run length distribution, the median run length (MRL provides a more credible representation of the central tendency than the average run length (ARL, as the mean is greater than the median. In this paper, therefore, MRL is used as the performance criterion instead of the traditional ARL. Generally, the performance of the DS X bar chart is investigated under the assumption of known process parameters. In practice, these parameters are usually estimated from an in-control reference Phase-I dataset. Since the performance of the DS X bar chart is significantly affected by estimation errors, we study the effects of parameter estimation on the MRL-based DS X bar chart when the in-control average sample size is minimised. This study reveals that more than 80 samples are required for the MRL-based DS X bar chart with estimated parameters to perform more favourably than the corresponding chart with known parameters.

Membandingkan Tingkat Kemiripan Rekaman Voice Changer Menggunakan Analisis Pitch, Formant dan Spectogram

Directory of Open Access Journals (Sweden)

Ahmad Subki

2018-02-01

Full Text Available Audio forensik merupakan salah satu ilmu yang mnyandingkan antara ilmu pengetahuan dan metode ilmiah dalam proses analisis rekaman suara untuk membantu dan mendukung pengungkapan suatu tindak kejahatan yang diperlukan dalam proses persidangan. Undang-undang ITE No.19 Tahun 2016 menyebutkan bahwa rekaman suara merupakan salah satu alat bukti digital yang sah dan dapat digunakan sebagai penguat dakwaan. Rekaman suara yang merupakan barang bukti digital sangatlah mudah dan rentan dimanipulasi, baik secara sengaja maupun tidak disengaja. Pada penelitian ini dilakukan analisis terkait tingkat kemiripan antara rekaman suara voice changer dengan rekaman suara asli menggunakan analisis pitch, formant dan spectogram, rekaman suara yang dianalisis ada dua jenis rekaman suara yaitu suara laki-laki dan suara perempuan. Rekaman suara voice changer  dan rekaman suara asli, diekstrak menggunakan tools praat kemudian informasi yang diperoleh dianalisis dengan analisis statistik pitch, formant dan spectrogrammenggunakan tools gnumeric. Penelitian ini menghasilkan bahwa analisis rekaman suara voice changer dengan rekaman suara asli dapat menggunakan analisis statistik pitch, formant dan spectrogram, rekaman suara voice changer A memiliki tingkat kemiripan yang paling tinggi dengan rekaman suara asli pada posisi low pitch, sedangkan voice changer yang lain lebih sulit untuk diidentifikasi.

Comparison of bar pattern and edge method for MTF measurement in radiology quality control

Energy Technology Data Exchange (ETDEWEB)

Alvarez, M.; Alves, A.F.F; Bacchim Neto, F.A.; Pavan, A.L.M.; Rosa, M.E.D.; Miranda, J.R.A.; Pina, D.R. de, E-mail: drpina@fmb.unesp.br [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Botucatu, SP (Brazil)

2015-08-15

Spatial resolution is one of the parameters that is routinely checked during acceptance procedures and regular quality control measurements. The spatial resolution of a radiographic imaging device is most appropriately expressed in terms of its modulation transfer function (MTF), which indicates the decline of detector spatial resolution with spatial frequency. Traditionally used methods of MTF measurement involve imaging either a narrow slit or a sharp edge to obtain the detector line spread function (LSF), whose frequency transform leads to the MTF. In this work is presented a study of the measurement of the limiting spatial resolution using the MTF method and the line-pair bar-pattern method. Our aim is to compare the bar-pattern method with the MTF method and then evaluate what method is the best for the dairy quality control tests and when is better to perform one test or other. These acquisition procedures were tested according to its reproducibility and variation due to noise. (author)

RELATING BOTTOM QUARK MASS IN DR-BAR AND MS-BAR REGULARIZATION SCHEMES

International Nuclear Information System (INIS)

2002-01-01

The value of the bottom quark mass at Q = M Z in the (bar D)(bar R) scheme is an important input for the analysis of supersymmetric models with a large value of tan β. Conventionally, however, the running bottom quark mass extracted from experimental data is quoted in the (bar M)(bar S) scheme at the scale Q = m b . We describe a two loop procedure for the conversion of the bottom quark mass from (bar M)(bar S) to (bar D)(bar R) scheme. The Particle Data Group value m b # bar M# # bar S#(m b # bar M# # bar S#) = 4.2 ± 0.2 GeV corresponds to a range of 2.65-3.03 GeV for m b # bar D# # bar R#(M Z )

Pembelajaran Biokimia melalui Analisis Kasus-kasus Olahraga untuk Meningkatkan Sport Scientific Literaci Mahasiswa

Directory of Open Access Journals (Sweden)

- Erman

2013-01-01

Full Text Available Abstract: Biochemistry Teaching through Sport-case Analyses to Improve Students' Sport Scientific Literacy. This quasi-experimental study focuses on examining the effect of biochemistry teaching on students' sport scientific literacy (SSL. The study involved 107 students of a teacher training institution, selected using a stratified random sampling. The results of t-test utilizing pre-test and post-test control group design show that biochemistry teaching affects students' SSL, as indicated by the scores of the experimental group which were four times higher than those of the control group. The SSL level of the experimental group increased from level 2 (nominal and level 3 (functional to level 3 (functional, level 4 (conceptual, and level 5 (multidimensional. Abstrak: Pembelajaran Biokimia melalui Analisis Kasus-kasus Olahraga untuk Meningkatkan Sport Scientific Literaci Mahasiswa. Penelitian ini bertujuan untuk mengetahui pengaruh pembelajaran biokimia melalui analisis kasus-kasus olahraga terhadap literasi sport scientific mahasiswa. Sebanyak 107 mahasiswa dari program studi ilmu keolahragaan sebuah LPTK di Surabaya dipilih sebagai sampel dengan menggunakan sampling random berstrata. Desain yang digunakan adalah desain pretest-posttest control group dari desain kuasi eksperimen. Data dianalisis dengan uji-t sampel independen. Hasil peneli­tian menunjukkan bahwa pembelajaran biokimia melalui analisis kasus-kasus olahraga merupakan suatu metode yang efektif untuk meningkatkan sport Scientific literacy (SSL mahasiswa. Rerata skor perolehan SSL yang diperoleh mahasiswa kelompok eksperimen sekitar 4 kali lebih tinggi daripada yang diperoleh mahasiswa kelompok kontrol. Tingkatan SSL mahasiswa naik dari level 2 (nominal dan level 3 (fungsional menjadi level 3 (fungsional, level 4 (konseptual, dan level 5 (multidimensional.

Performance simulation of BaBar DIRC bar boxes in TORCH

Science.gov (United States)

Föhl, K.; Brook, N.; Castillo García, L.; Cussans, D.; Forty, R.; Frei, C.; Gao, R.; Gys, T.; Harnew, N.; Piedigrossi, D.; Rademacker, J.; Ros García, A.; van Dijk, M.

2017-12-01

TORCH is a large-area precision time-of-flight detector based on the DIRC principle. The DIRC bar boxes of the BaBar experiment at SLAC could possibly be reused to form a part of the TORCH detector time-of-flight wall area, proposed to provide positive particle identification of low momentum kaons in the LHCb experiment at CERN. For a potential integration of BaBar bar boxes into TORCH, new imaging readout optics are required. From the several designs of readout optics that have been considered, two are used in this paper to study the effect of BaBar bar optical imperfections on the detector reconstruction performance. The kaon-pion separation powers obtained from analysing simulated photon hit patterns show the performance reduction for a BaBar bar of non-square geometry compared to a perfectly rectangular cross section.

ANALISIS PENERAPAN 8 STANDAR NASIONAL PENDIDIKAN PADA SMP NEGERI 2 DOLOPO KABUPATEN MADIUN

Directory of Open Access Journals (Sweden)

Luki Eko Cahyono

2015-10-01

Penelitian ini menggunakan desain penelitian Deskriptif Kualitatif. Jenis penelitian adalah studi kasus. Data yang digunakan adalah data Primer. Teknik pengumpulan data yang digunakan adalah wawancara dan dokumentasi. Teknik keabsahan data adalah Triangulasi Sumber dan teknik analisis data yang digunakan adalah pendekatan Strengths, Weakness, Opportunities, dan Threats (Analisis SWOT. Kesimpulan penelitian ini adalah (1 Hasil analisis Strenght (Kekuatan adalah sekolah sudah merencanakan, melaksanakan dan mengevaluasi sebagian besar indikator dalam pemenuhan Standar Nasional Pendidikan sehingga meningkatkan mutu pendidikan sekolah. (2 Hasil analisis Weakness (kelemahan adalah keterbatasan anggaran dana dan sumber daya manusia baik peserta didik, pendidik, maupun tenaga kependidikan dalam pemenuhan seluruh unsur Standar Nasional Pendidikan. (3 Hasil analisis Opportunities (peluang adalah Pemberian workshop dan pelatihan kepada pendidik dan tenaga kependidikan meningkatkan kualitas pendidikan sekolah, dan perencanaan, pelaksanaan pembiayaan serta evaluasi penganggaran yang baik memberikan dampak positif terhadap semua unsur operasional sekolah maupun sarana prasarana sekolah. (4 Hasil analisis Threats (Tantangan adalah perencanaan, sosialisasi, pelaksanaan dan evaluasi serta tindak lanjut yang tidak dijalankan dengan manajemen yang baik dalam upaya pemenuhan Standar Nasional Pendidikan akan menghambat peningkatan kualitas pendidikan sekolah. (5 Hasil penerapan Standar Nasional Pendidikan pada SMP Negeri 2 Dolopo menggunakan analisis SWOT menunjukkan bahwa Kekuatan lebih besar daripada Kelemahan dan Peluang lebih besar dari Ancaman, yang berarti Standar Nasional Pendidikan telah terpenuhi dan menghasilkan Akreditasi Sekolah nilai A.

The company they keep: drinking group attitudes and male bar aggression.

Science.gov (United States)

Dumas, Tara M; Graham, Kathryn; Wells, Samantha

2015-05-01

The purpose of this study was to assess (a) similarities in self-reported bar-aggression-related attitudes and behaviors among members of young male groups recruited on their way to bars and (b) group-level variables associated with individual members' self-reported likelihood of perpetrating physical bar aggression in the past year, controlling for individual attitudes. Young, male, natural drinking groups recruited on their way to a bar district Thursday, Friday, and Saturday nights (n = 167, 53 groups) completed an online survey that measured whether they had perpetrated physical aggression at a bar in the past year and constructs associated with bar aggression, including attitudes toward male bar aggression and frequency of heavy episodic drinking in the past year. Intraclass correlations and chi-square tests demonstrated significant within-group similarity on bar-aggression-related attitudes and behaviors (ps bar aggression were significantly associated with individuals' likelihood of perpetrating physical bar aggression, controlling for individual attitudes (p bar aggression was nonsignificant in the full model. This study suggests that the most important group influence on young men's bar aggression is the attitudes of other group members. These attitudes were associated with group members' likelihood of engaging in bar aggression over and above individuals' own attitudes. A better understanding of how group attitudes and behavior affect the behavior of individual group members is needed to inform aggression-prevention programming.

Influence of the control bars on the fuel temperature instrumented in the C and D rings; Influencia de las barras de control sobre la temperatura del combustible instrumentado en los anillos C y D

Energy Technology Data Exchange (ETDEWEB)

Paredes G, L.C

1991-12-15

It was demonstrated that the influence on the fuel temperature to the movement of the control bars, this in direct relationship with the value in negative reactivity of each control bar for the different positions of the ring C. Consequently the influence of bigger to smaller, is given by the regulator bar, fine, of safety and transitory for the configuration of fuel No. 16. It was proven that the ring is the one that presents the biggest generation of power for ring of the reactor, for that in it is registered the fuel temperatures but high. Those were obtained response of different positions in the rings C and D in function of the route of the four control bars and safety of the reactor. (Author)

Chocolate bar as an incentive did not increase response rate among physiotherapists: a randomised controlled trial

Directory of Open Access Journals (Sweden)

Dahm Kristin

2008-06-01

Full Text Available Abstract Background The aim of this study was to assess the effect of a small incentive, a bar of dark chocolate, on response rate in a study of physiotherapy performance in patients with knee osteoarthritis. Findings Norwegian physiotherapists from private practice were randomised in blocks to an intervention group (n = 1027 receiving a bar of dark chocolate together with a data-collection form, and a control group (n = 1027 that received the data-collection form only. The physiotherapists were asked to prospectively complete the data-collection form by reporting treatments provided to one patient with knee osteoarthritis through 12 treatment sessions. The outcome measure was response rate of completed forms. Out of the 510 physiotherapists that responded, 280 had completed the data-collection form by the end of the study period. There was no difference between the chocolate and no-chocolate group in response rate of those who sent in completed forms. In the chocolate group, 142 (13.8% returned completed forms compared to 138 (13.4% in the control group, ARR = 0.4 (95% CI: -3.44 to 2.6. Conclusion A bar of dark chocolate did not increase response rate in a prospective study of physiotherapy performance. Stronger incentives than chocolate seem to be necessary to increase the response rate among professionals who are asked to report about their practice. Trial Registration Current Controlled Trials register: ISRCTN02397855

A novel four-bar linkage prosthetic knee based on magnetorheological effect: principle, structure, simulation and control

Science.gov (United States)

Xu, Lei; Wang, Dai-Hua; Fu, Qiang; Yuan, Gang; Hu, Lei-Zi

2016-11-01

In this paper, the principle and structure of the four-bar linkage prosthetic knee based on the magnetorheological effect (FLPKME) are proposed and realized by individually integrating the upper and lower link rods of the four-bar linkage with the piston rod and the outer cylinder of the magnetorheological (MR) damper. The integrated MR damper, in which the MR fluid is operated in the shear mode, has a double-ended structure. The prototype of the FLPKME is designed and fabricated. Utilizing the developed FLPKME, the lower limb prosthesis is developed, modeled, and simulated. On these bases, the control algorithm for the FLPKME is developed. A test platform for the FLPKME is developed and the performance of the FLPKME with seven constant currents and controlled currents by the control algorithm developed in this paper are experimentally tested. The results show that the FLPKME with a constant current of 1.6 A possesses the basic stable gait, and the FLPKME with the controlled currents by the control algorithm developed in this paper is able to track the motions well and to imitate the natural motions of a healthy human knee joint.

Qq(Q-bar)(q-bar)' states in chiral SU(3) quark model

International Nuclear Information System (INIS)

Zhang Haixia; Zhang Min; Zhang Zongye

2007-01-01

We study the masses of Qq(Q-bar)(q-bar)' states with J PC =0 ++ , 1 ++ , 1 +- and 2 ++ in the chiral SU(3) quark model, where Q is the heavy quark (c or b) and q(q') is the light quark (u,d or s). According to our numerical results, it is improbable to make the interpretation of [cn(c-bar)(n-bar)] 1 ++ and [cn(c-bar)(n-bar)] 2 ++ (n=u,d) states as X(3872) and Y(3940), respectively. However, it is interesting to find the tetraquarks in the bq(b-bar)(q-bar)' system. (authors)

submitter Performance simulation of BaBar DIRC bar boxes in TORCH

CERN Document Server

Föhl, K; Castillo García, L; Cussans, D; Forty, R; Frei, C; Gao, R; Gys, T; Harnew, N; Piedigrossi, D; Rademacker, J; Ros García, A; van Dijk, M

2017-01-01

TORCH is a large-area precision time-of-flight detector based on the DIRC principle. The DIRC bar boxes of the BaBar experiment at SLAC could possibly be reused to form a part of the TORCH detector time-of-flight wall area, proposed to provide positive particle identification of low momentum kaons in the LHCb experiment at CERN. For a potential integration of BaBar bar boxes into TORCH, new imaging readout optics are required. From the several designs of readout optics that have been considered, two are used in this paper to study the effect of BaBar bar optical imperfections on the detector reconstruction performance. The kaon-pion separation powers obtained from analysing simulated photon hit patterns show the performance reduction for a BaBar bar of non-square geometry compared to a perfectly rectangular cross section.

Bar code usage in nuclear materials accountability

International Nuclear Information System (INIS)

Mee, W.T.

1983-01-01

The age old method of physically taking an inventory of materials by listing each item's identification number has lived beyond its usefulness. In this age of computerization, which offers the local grocery store a quick, sure, and easy means to inventory, it is time for nuclear materials facilities to automate accountability activities. The Oak Ridge Y-12 Plant began investigating the use of automated data collection devices in 1979. At that time, bar code and optical-character-recognition (OCR) systems were reviewed with the purpose of directly entering data into DYMCAS (Dynamic Special Nuclear Materials Control and Accountability System). Both of these systems appeared applicable; however, other automated devices already employed for production control made implementing the bar code and OCR seem improbable. However, the DYMCAS was placed on line for nuclear material accountability, a decision was made to consider the bar code for physical inventory listings. For the past several months a development program has been underway to use a bar code device to collect and input data to the DYMCAS on the uranium recovery operations. Programs have been completed and tested, and are being employed to ensure that data will be compatible and useful. Bar code implementation and expansion of its use for all nuclear material inventory activity in Y-12 is presented

Formation of q bar q resonances in the bar NN system

International Nuclear Information System (INIS)

Ivanov, N.Ya.

1995-01-01

The formation of q bar q resonances lying on the leading Regge trajectories in the bar NN system is studied in the quark-gluon string model. The model predicts strong suppression of the decays of q bar q states into bar NN pairs in relation to two-meson modes. The author's analysis shows that the contributions of the resonances f 4 (2050) (I G J PC = 0 + 4 ++ ), ρ 5 (2240) (I G J PC = 1 + 5 -- ), and f 6 (2510) (I G J PC = 0 + 6 ++ ) to the processes of two-meson bar NN annihilation (bar pp → ππ, bar KK, hor-ellipsis) are about 1% of the corresponding experimental integrated cross sections. 30 refs., 2 figs., 1 tab

Production of n-bar's and Sigma-bar+-'s in e+e- annihilations

International Nuclear Information System (INIS)

Ferguson, T.; Buchanan, C.; Nodulman, L.; Poster, R.; Breidenbach, M.; Morehouse, C.C.; Vannucci, F.

1979-01-01

The production of antineutrons and charged Sigma-bar's in e + e - annihilations has been measured at √s +- production between 4 and 7 GeV is consistent with simple expectations for charmed-baryon production. A search for the decays Lambda-bar - /sub c/ → Sigma-bar +- π -+ π - and Sigma-baratsup asteriskat/sub c//Sigma-bar/sub c/ → Lambda-bar - /sub c/π +- yields no significant peaks. An upper limit, at the 90% confidence level, of sigmaatsub Lambda-baratc-italicB (Lambda-bar/sub c/ → Sigma-bar +- π -+ π - ) < 56 pb is set

Anisotropic chemical etching of semipolar {101-bar 1-bar}/{101-bar +1} ZnO crystallographic planes: polarity versus dangling bonds

International Nuclear Information System (INIS)

Palacios-Lidon, E; Perez-GarcIa, B; Colchero, J; Vennegues, P; Zuniga-Perez, J; Munoz-Sanjose, V

2009-01-01

ZnO thin films grown by metal-organic vapor phase epitaxy along the nonpolar [112-bar] direction and exhibiting semipolar {101-bar 1-bar}/{101-bar +1} facets have been chemically etched with HCl. In order to get an insight into the influence of the ZnO wurtzite structure in the chemical reactivity of the material, Kelvin probe microscopy and convergent beam electron diffraction have been employed to unambiguously determine the absolute polarity of the facets, showing that {101-bar +1} facets are unstable upon etching in an HCl solution and transform into (000+1)/{101-bar 1-bar} planes. In contrast, {101-bar 1-bar} undergo homogeneous chemical etching perpendicular to the initial crystallographic plane. The observed etching behavior has been explained in terms of surface oxygen dangling bond density, suggesting that the macroscopic polarity plays a secondary role in the etching process.

Four bars inn; Four bars inn

Energy Technology Data Exchange (ETDEWEB)

Nishiumi, T. [National Defense Academy, Kanagawa (Japan)

1999-05-15

The name Four Bars Inn puns on four drinking bars and four bars on a musical score. It is a public house sited on the busy St. Mary Street, Cardiff, England. During my stay in that town, I often attended the regular jam session that opened at the bar at nine o`clock every Monday evening. A jam session is an event in which any amateur player, and a professional artist occasionally, is allowed to come on the stage freely and to play jazz, the participation fee as low as 300-yen. It is an occasion that provides a friendly meeting of man and woman, young and old, everyone carrying a pint of ale. Senior people happily talking to young ones aged like their grandchildren certainly presents a heart-warming scene, which we scarcely encounter in Japan. The affection that the British entertain toward their domestic furnishings relayed down through many a generation may lead to their respect for senior citizens. I heartily look forward detecting like scenes some day at drinking spots in Japan where the consumption-happy days are over. (NEDO)

Derivation of asymptotic Vertical BarΔIVertical Bar = 1/2 rule

International Nuclear Information System (INIS)

Terasaki, K.; Oneda, S.

1982-01-01

It is argued that the origin of the observed approximate Vertical BarΔIVertical Bar = 1/2 rule is the presence of an asymptotic Vertical BarΔIVertical Bar = 1/2 rule which exists among certain two-body hadronic weak matrix elements, involving especially the ground-state hadrons

First Measurement of σ(gg → t$\\bar{t}$)/σ(p$\\bar{p}$ → t$\\bar{t}$)

Energy Technology Data Exchange (ETDEWEB)

Alamdari, Shabnaz Pashapour [Univ. of Toronto, ON (Canada)

2008-01-01

The work presented here is the first measurement of the fraction of top quark pair production through gluon-gluon fusion. We use an integrated luminosity of 0.96 ± 0.06 fb^-1 of p{bar p} collisions at √s of 1.96 TeV collected by the CDF II detector. We select t$\\bar{t}$ candidates by identifying a high-p_T lepton candidate, a large missing E_T as evidence for a neutrino candidate and at least four high E_T jets, one of which has to be identified as originating from a b quark. The challenge is to discriminate between the two production processes with the identical final state, gg → t$\\bar{t}$ and q$\\bar{p}$ → t$\\bar{t}$. We take advantage of the fact that compared to a quark, a gluon is more likely to radiate a low momentum gluon and therefore, one expects a larger number of charged particles with low p_T in a process involving more gluons. Given the large uncertainties associated with the modeling of the low p_T charged particle multiplicity, a data-driven technique was employed. Using calibration data samples, we show there exists a clear correlation between the observed average number of low p_T charged particles and the average number of gluons involved in the production process predicted by Monte Carlo calculations. Given the correlation, one can identify low p_T charged particle multiplicity distributions associated with specific average number of gluons. The W + 0 jet sample and dijets sample with leading jet E_T in the range of 80-100 GeV are used to find no-gluon and gluon-rich low p{sub T} charged particle multiplicity distributions, respectively. Using these no-gluon and gluon-rich distributions in a likelihood fit, we find the fraction of gluon-rich events in t{bar t} candidates. This fraction has contributions from the signal and background events. Taking into account these contributions and the gg → t$\\bar{t}$ and q$\\bar{q}$ → t$\\bar

Improving Vehicle Ride and Handling Using LQG CNF Fusion Control Strategy for an Active Antiroll Bar System

Directory of Open Access Journals (Sweden)

N. Zulkarnain

2014-01-01

Full Text Available This paper analyses a comparison of performance for an active antiroll bar (ARB system using two types of control strategy. First of all, the LQG control strategy is investigated and then a novel LQG CNF fusion control method is developed to improve the performances on vehicle ride and handling for an active antiroll bar system. However, the ARB system has to balance the trade-off between ride and handling performance, where the CNF consists of a linear feedback law and a nonlinear feedback law. Typically, the linear feedback is designed to yield a quick response at the initial stage, while the nonlinear feedback law is used to smooth out overshoots in the system output when it approaches the target reference. The half car model is combined with a linear single track model with roll dynamics which are used for the analysis and simulation of ride and handling. The performances of the control strategies are compared and the simulation results show the LQG CNF fusion improves the performances in vehicle ride and handling.

The He+H-bar → Hep-bar +e+ rearrangement

International Nuclear Information System (INIS)

Todd, Allan C.; Armour, Edward A.G.

2006-01-01

In this paper, we present a summary of our work in progress on calculating cross sections for the He+H-bar ->Hep-bar +e + rearrangement process in HeH-bar scattering. This has involved a study of the system Hep-bar within the Born-Oppenheimer (BO) approximation using the Rayleigh-Ritz variational method. This work has been reported in [A.C. Todd, E.A.G. Armour, J. Phys. B 38 (2005) 3367] and is summarised here. Similar calculations are in progress for the He+H-bar entrance channel. We intend to use the entrance channel and rearrangement channel wave functions to obtain the cross sections for the rearrangement using the distorted wave Born approximation T-matrix method described elsewhere in these proceedings [E.A.G. Armour, S. Jonsell, Y. Liu, A.C. Todd, these Proceedings, doi:10.1016/j.nimb.2006.01.049

Measurement of the asymmetry parameter for the decay $\\bar\\Lambda \\to \\bar p\\pi^+$

OpenAIRE

BES collaboration

2009-01-01

Based on a sample of $58\\times10^6J/\\psi$ decays collected with the BESII detector at the BEPC, the $\\bar\\Lambda$ decay parameter $\\alpha_{\\bar\\Lambda}$ for $\\bar\\Lambda\\to \\bar p \\pi^+$ is measured using about 9000 $J/\\psi\\to\\Lambda\\bar\\Lambda\\to p \\bar p \\pi^+\\pi^-$ decays. A fit to the joint angular distributions yields $\\alpha_{\\bar\\Lambda}(\\bar\\Lambda\\to \\bar p\\pi^+)=-0.755\\pm0.083\\pm0.063$, where the first error is statistical, and the second systematic.

Analisis Sektor/Sub Sektor Unggulan di Kabupaten Bungo

Directory of Open Access Journals (Sweden)

Gafur Gafur

2016-03-01

Full Text Available Abstract. This study aimed to analyze the leading sectors in Bungo. The method used is Location Quotient (LQ, Dynamic Location Quotient (DLQ, specialization index, Growth Ratio Model (MRP. Based on analysis of LQ and DLQ, there are only two basis sectors at present and in the future, namely the construction sector and trade, hotels and restaurants. Based on the analysis of Specialization Index, in Bungo Regency has a concentration of the economy in the agricultural sector and the manufacturing sector. Based on MRP analysis also showed that prominent sector growth at the level of Bungo and Jambi Province, namely electricity, gas and water supply; the building sector; and trade, hotels and restaurants. Keywords : Location Quotient (LQ, Dinamic Location Quotient (DLQ, Specialization Index, Growth Ratio Model   Abstrak. Penelitian ini bertujuan untuk menganalisis sektor unggulan di Kabupaten Bungo. Metode yang digunakan adalah analisis Location Quotient (LQ, Dinamic Location Quotient (DLQ, indeks spesialisasi, Model Rasio Pertumbuhan (MRP. Berdasarkan analisis LQ dan DLQ,  hanya ada 2 sektor yang menjadi sektor basis pada saat ini dan pada masa yang akan datang yaitu sektor bangunan dan sektor perdagangan, hotel dan restoran. Berdasarkan analisis Indeks Spesialisasi, di Kabupaten Bungo telah terjadi konsentrasi ekonomi pada sektor pertanian dan sektor industri pengolahan. Berdasarkan analisis MRP juga dapat diketahui bahwa sektor yang menonjol pertumbuhannya pada tingkat Kabupaten Bungo dan Provinsi Jambi yaitu sektor listrik, gas dan air bersih; sektor bangunan; serta sektor perdagangan, hotel dan restoran. Kata Kunci : Location Quotient (LQ, Dinamic Location Quotient (DLQ, indeks spesialisasi, Model Rasio Pertumbuhan

A Study of (bar B)0 --> D(*)0 (bar K)(*)0 Decays

International Nuclear Information System (INIS)

Aubert, B.

2004-01-01

The authors presented evidence for the decay (bar B) 0 --> D* 0 (bar K) 0 as well as new measurements of the branching fractions for the decays (bar B) 0 --> D 0 (bar K) 0 and D 0 (bar K)* 0 . Their measurements are in agreement with the expectation derived from a cited reference and with previous measurements. They use the central value of their measurement for B((bar B) 0 --> (bar D) 0 K* 0 ) and obtain τ < 0.8 at the 90% C.L. from a central value of τ = 0.4 ± 0.2 (stat.) ± 0.2 (syst.). The main contribution to the systematic uncertainty is from the estimated peaking background since most systematic uncertainties on the branching fractions cancel in the ratio

Analisis dan Desain BI-Dashboard Monitoring Realisasi Daftar Isian Pelaksanaan Anggaran (DIPA pada Kantor Pelayanan Perbendaharaan Negara (KPPN

Directory of Open Access Journals (Sweden)

Ernestina Rahmanasari

2013-09-01

Full Text Available Transaksi keuangan badan pemerintahan tingkat daerah dipertanggungjawabkan kepada Kementrian Keuangan melalui Kantor Pelayanan Perbendaharaan Negara (KPPNsetiap bulan dalam bentuk Laporan Keuangan Pemerintah Pusat (LKPP. Laporan Keuangan, didukung dengan teknologi Business Intelligence(BI dashboarddapat dimanfaatkan sebagai data-driven decision support system yang mendorong performa kinerja. Analisis dan desainterhadap pembuatan BI dashboard menunjukkanbagaimana Laporan Keuangan dapat digunakan untuk monitoring realisasi penyerapan dana DIPA dan kinerja instansi secara tepat waktu dan interaktif.Analisis terdiri dari analisis Indikator Kinerja Utama (IKU dan analisis Laporan Keuangan. IKUpada analisis dan desain ini mencakup ketercapaian estimasi dengan penerimaan, ketercapaian pagu dengan belanja, ketepatan waktu pengiriman rekonsiliasi oleh instansi, validasi, akurasi, dan ketepatan data. Desain terdiri dari katalog dashboard, alur analisis, sumber data, desain User-Interface, dan desain objek dashboard. Sedangkan dashboard yang dirancang menggunakan aplikasi Vera sebagai Enterprise System, mengakses basis data MySQL, dan menampilkan data dengan teknologi data-driven business-intelligence Qlikview. Desain aplikasi yang telah dibuat akan menampilkan 4 (empat Tab yaitu: Dashboard utama, Analisis, Monitoring, dan Laporan

Analysis of the uniform augmentation of the flow through the nucleus in the searching process of the patterns of objective control bars in a BWR

International Nuclear Information System (INIS)

Montes, J.L.; Ortiz, J.J.; Perusquia, R.

2004-01-01

The search of the patterns of control bars (PBCs) in a power reactor of boiling water, requires to investigate a very wide space of solutions, in principle they are had of the order of 3 x 10 152 possible configurations to establish the PBC in a point given before reaching the end of the cycle. This situation suggests to define those restrictions and conditions initial appropriately so that the search converges toward the desirable results. Presently work the results of the search of patterns of bars based on different flow scenarios through the nucleus are presented. The Cycle 10 is analysed (C10) of the Unit One of the Nuclear Power station Laguna Verde (CNLV), which presents an interesting mixture of diverse designs of control bars used in operation to power. The search of the patterns of bars of objective control is carried out applying the GACRP program which is based on the calculation technique known as genetic algorithms. (Author)

Semiotika Teks: Sebuah Pendekatan Analisis Teks

Directory of Open Access Journals (Sweden)

Yasraf Amir Piliang

2004-12-01

tanda-tanda yang membentuk apa yang disebut sebagai ‘teks’. Analisis teks, menurut Roland Barthes, akan menghasilkan makna denotatif, yakni makna tanda yang bersifat eksplisit, dan makna konotatif, yaitu makna tanda lapis kedua yang bersifat implisit.

Microfinanza: analisi d’impatto di un programma in India

Directory of Open Access Journals (Sweden)

Tommaso Rondinella

2005-03-01

Full Text Available L’analisi d’impatto dei programmi di microfinanza è uno strumento utile sia per migliorare i servizi offerti sia per garantire ai donatori che il denaro concesso sia utilizzato per programmi efficaci nell’alleviare la povertà. Il presente lavoro è costituito da due parti: la prima è dedicata all’analisi d’impatto, la seconda all’analisi empirica sul campo. L’indagine è stata condotta attraverso l’utilizzo di uno strumento in grado di dare una indicazione chiara dei cambiamenti avvenuti nelle condizioni di vita dei beneficiari e con il pregio di essere applicabile a costi molto ridotti. I risultati ottenuti mostrano in che misura l’accesso al credito cambi le condizioni di vita dei più poveri inducendo consistenti aumenti del reddito familiare, dei risparmi, della diversificazione delle attività produttive e del consumo di cibo. Inoltre si osserva, all’interno dei nuclei familiari, un miglioramento della condizione femminile chiaramente dipendente dalla partecipazione al programma di microcredito

The Carnegie-Irvine Galaxy Survey. V. Statistical Study of Bars and Buckled Bars

Science.gov (United States)

Li, Zhao-Yu; Ho, Luis C.; Barth, Aaron J.

2017-08-01

Simulations have shown that bars are subject to a vertical buckling instability that transforms thin bars into boxy or peanut-shaped structures, but the physical conditions necessary for buckling to occur are not fully understood. We use the large sample of local disk galaxies in the Carnegie-Irvine Galaxy Survey to examine the incidence of bars and buckled bars across the Hubble sequence. Depending on the disk inclination angle (I), a buckled bar reveals itself as either a boxy/peanut-shaped bulge (at high I) or as a barlens structure (at low I). We visually identify bars, boxy/peanut-shaped bulges, and barlenses, and examine the dependence of bar and buckled bar fractions on host galaxy properties, including Hubble type, stellar mass, color, and gas mass fraction. We find that the barred and unbarred disks show similar distributions in these physical parameters. The bar fraction is higher (70%-80%) in late-type disks with low stellar mass (M * 1010.5 M ⊙), and decreases with higher gas mass ratio. These results suggest that bars are more difficult to grow in massive disks that are dynamically hotter than low-mass disks. However, once a bar forms, it can easily buckle in the massive disks, where a deeper potential can sustain the vertical resonant orbits. We also find a probable buckling bar candidate (ESO 506-G004) that could provide further clues to understand the timescale of the buckling process.

Fast Fourier and discrete wavelet transforms applied to sensorless vector control induction motor for rotor bar faults diagnosis.

Science.gov (United States)

Talhaoui, Hicham; Menacer, Arezki; Kessal, Abdelhalim; Kechida, Ridha

2014-09-01

This paper presents new techniques to evaluate faults in case of broken rotor bars of induction motors. Procedures are applied with closed-loop control. Electrical and mechanical variables are treated using fast Fourier transform (FFT), and discrete wavelet transform (DWT) at start-up and steady state. The wavelet transform has proven to be an excellent mathematical tool for the detection of the faults particularly broken rotor bars type. As a performance, DWT can provide a local representation of the non-stationary current signals for the healthy machine and with fault. For sensorless control, a Luenberger observer is applied; the estimation rotor speed is analyzed; the effect of the faults in the speed pulsation is compensated; a quadratic current appears and used for fault detection. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

ANALISIS KINERJA KEUANGAN PERUSAHAAN PT. ASURANSI JIWASRAYA (PERSERO) CABANG SULAWESI SELATAN

OpenAIRE

ARIANTY, ASTRI

2012-01-01

ANALISIS KINERJA KEUANGAN PERUSAHAAN PT. ASURANSI JIWASRAYA (PERSERO) CABANG SULAWESI SELATAN COMPANY FINANCIAL PERFORMANCE ANALYSIS PT. INSURANCE JIWASRAYA (LIMITED) SOUTH BRANCH SULAWESI Astri Arianty Prof. Dr. H. Muhammad Ali, SE., M.S Drs. Armayah Sida, M.Si Analisis terhadap kinerja keuangan perusahaan sangat penting dilakukan untuk mengetahui sejauh mana tingkat pencapaian yang telah diperoleh perusahaan sebagaimana tujuan perusahaan dalam menjalankan proses produk...

The Carnegie-Irvine Galaxy Survey. V. Statistical Study of Bars and Buckled Bars

Energy Technology Data Exchange (ETDEWEB)

Li, Zhao-Yu [Key Laboratory for Research in Galaxies and Cosmology, Shanghai Astronomical Observatory, Chinese Academy of Science, 80 Nandan Road, Shanghai 200030 (China); Ho, Luis C. [Kavli Institute for Astronomy and Astrophysics, Peking University, Beijing 100871 (China); Barth, Aaron J., E-mail: lizy@shao.ac.cn [Department of Physics and Astronomy, 4129 Frederick Reines Hall, University of California, Irvine, CA, 92697-4575 (United States)

2017-08-10

Simulations have shown that bars are subject to a vertical buckling instability that transforms thin bars into boxy or peanut-shaped structures, but the physical conditions necessary for buckling to occur are not fully understood. We use the large sample of local disk galaxies in the Carnegie-Irvine Galaxy Survey to examine the incidence of bars and buckled bars across the Hubble sequence. Depending on the disk inclination angle ( i ), a buckled bar reveals itself as either a boxy/peanut-shaped bulge (at high i ) or as a barlens structure (at low i ). We visually identify bars, boxy/peanut-shaped bulges, and barlenses, and examine the dependence of bar and buckled bar fractions on host galaxy properties, including Hubble type, stellar mass, color, and gas mass fraction. We find that the barred and unbarred disks show similar distributions in these physical parameters. The bar fraction is higher (70%–80%) in late-type disks with low stellar mass ( M {sub *} < 10{sup 10.5} M {sub ⊙}) and high gas mass ratio. In contrast, the buckled bar fraction increases to 80% toward massive and early-type disks ( M {sub *} > 10{sup 10.5} M {sub ⊙}), and decreases with higher gas mass ratio. These results suggest that bars are more difficult to grow in massive disks that are dynamically hotter than low-mass disks. However, once a bar forms, it can easily buckle in the massive disks, where a deeper potential can sustain the vertical resonant orbits. We also find a probable buckling bar candidate (ESO 506−G004) that could provide further clues to understand the timescale of the buckling process.

Decays of Higgs bosons to bb-bar, ττ-bar, and cc-bar as signatures of supersymmetry and CP phases

International Nuclear Information System (INIS)

Ibrahim, Tarek; Nath, Pran

2003-01-01

The branching ratio of the lightest Higgs boson decay into bb(bar sign), ττ-bar and cc-bar is sensitive to supersymmetric effects. We include in this work the effects of CP phases on the Higgs boson decays. Specifically we compute the deviation of the CP phase dependent branching ratio from the standard model result. The analysis includes the full one loop corrections of fermion masses including CP phases involving the gluino, the chargino and the neutralino exchanges. The analysis shows that the supersymmetric effects with CP phases can change the branching ratios by as much as 100% for the lightest Higgs boson decay into bb(bar sign) and ττ-bar with similar results holding for the heavier Higgs boson decays. A detailed analysis is also given for the effects of CP phases on the Higgs boson decays into cc-bar. The deviations of R b/τ and R b/c from the standard model result are investigated as a possible signature of supersymmetry and CP effects. Thus a measurement of the decays of the Higgs boson into bb-bar, ττ-bar and cc-bar may provide important clues regarding the existence of supersymmetry and CP phases

Perumusan Strategi Bersaing pada Perusahaan Ban dengan Metode Analisis Portofolio Produk (Studi Kasus: PT Multistrada Arah Sarana, Tbk

Directory of Open Access Journals (Sweden)

Nathanael August Zefanya

2017-01-01

Full Text Available Industri ban di Indonesia mengalami perkembangan pesat dalam kurun waktu 10 tahun terakhir. Namun, terjadinya krisis ekonomi global menjadi penyebab menurunnya pendapatan, salah satunya adalah PT MASA dengan produk utamanya yaitu ban mobil Achilles dan ban motor Corsa yang digunakan sebagai objek penelitian ini. Telah diilakukan analisis PESTEL dan Porter’s Five Forces, identifikasi faktor lingkungan internal dan eksternal dengan analisis SWOT serta merumuskan alternatif strategi bersaing untuk direkomendasikan kepada PT MASA. Perumusan strategi alternatif didapat dari hasil analisis Matriks BCG dan Matriks IE sebagai analisis portofolio untuk mendapatkan tema strategi alternatif dalam pembuatan Matriks SWOT. Strategi alternatif kemudian diperingkatkan dengan QSPM dan dilanjutkan pembuatan rencana aksi bagi PT MASA dalam waktu 5 tahun ke depan. Setelah dilakukan analisis industri, diketahui bahwa ancaman terbesar datang dari pesaing produsen ban. Dari hasil analisis portofolio, PT MASA berada di kuadran I karena memiliki koordinat IFE serta EFE 3,32 dan 3,26. Dari hasil analisis Matriks IE, PT MASA direkomendasikan untuk melakukan strategi grow and build. Hasil Matriks BCG menunjukkan bahwa Achilles berada di dogs, sementara Corsa berada di question marks. Terdapat 13 strategi alternatif hasil dari formulasi strategi dengan menggunakan matriks TOWS. Dari hasil analisis QSPM, terdapat 7 alternatif strategi terbaik dan rencana aksi..

ANALISIS ATRIBUT-ATRIBUT YANG MEMPENGARUHI TINGKAT KEPUASAN PELANGGAN TELEPON RUMAH (FIXED WIRELINE MENGGUNAKAN METODE ANALISIS DISKRIMINAN (STUDI KASUS DI PT. TELKOM KANDATEL SEMARANG

Directory of Open Access Journals (Sweden)

Diana Puspita Sari

2012-02-01

Full Text Available PT Telkom memiliki misi untuk memberikan layanan One Stop Infocom dengan kualitas prima dan harga kompetitif. Kenyataannya, PT. Telkom Kandatel Semarang mengalami penurunan pendapatan. Semakin berkembangnya layanan jasa fixed wireless yang lebih mudah dan murah, menyebabkan penurunan pemakaian jasa fixed wireline. Dengan konsumen melakukan pembelian pertama pada suatu produk tertentu dengan harga terjangkau, kualitas terjamin, maka konsumen akan kembali membeli produk tersebut, dan dampaknya dari fenomena ini adalah kepuasan pelanggan (customer satisfaction terhadap produk tertentu karena telah memberikan kepuasan dan terjaminnya kualitas, walaupun banyak pesaing lain.  Oleh sebab itu, penelitian ini membahas dan melakukan analisis kepuasan pelanggan fixed wireline PT. Telkom Kandatel Semarang, menggunakan variabel kepuasan pelanggan untuk dikelompokkan menjadi tiga tingkatan yaitu pelanggan yang sangat puas, puas, dan tidak puas dengan menggunakan analisis klaster, kemudian dilakukan analisis variabel 4P Customer Relationship Management (CRM menggunakan analisis diskriminan, sehingga diketahui atribut yang mempengaruhi tingkat kepuasan pelanggan agar PT. Telkom Kandatel Semarang dapat terus mempertahankan dan meningkatkan kepuasan pelanggan dengan berusaha memenuhi kebutuhan dan keinginan pelanggan dengan maksud kepuasan pelanggan tidak menurun agar dapat meningkatkan intensitas pemakaian fixed wireline. Kata kunci : analisis klaster, analisis diskriminan, kepuasan pelanggan, fixed wireline      PT Telkom has a mission to provide a One Stop Infocom services with excellent quality and competitive price. In fact, PT. Telkom Semarang Kandatel income decreased. The growing fixed wireless service is easier and cheaper, causes a decrease in the use of fixed wireline services.With the first consumer purchase a given product at an affordable price, guaranteed quality, then consumers will buy the product again, and the impact of this phenomenon is

Method and an apparatus to control the lateral motion of a long metal bar being formed by a mechanical process such as rolling or drawing

Science.gov (United States)

Chang, Tzyy-Shuh; Huang, Hsun-Hau; Lin, Chang-Hung

2007-10-02

An adjustable guide, includes two or more mechanisms each having a rotatable retaining element containing a retaining groove with a variable radius in its perimeter surface. The grooves form a guidance path to control the lateral, i.e. non-axial, motion of a long bar moving along a longitudinal axis during a production process.The diameter of the guidance path varies according to the variable radii of the grooves. The guidance path increases in size at a predetermined rate, from a point of origin to an end point on the retaining groove. Rotating the retaining elements causes the diameter of the retaining grooves to change so that the size of the guidance path can be changed to match the diameter of the bar being rolled, size of the guidance path can be changed to fit the diameter of a new bar rolled without having to exchange the guide for a different sized guide, reduce fiction between the bar and the guide, a media, such as compressed air, can be injected between the retaining elements via orifices.Each retaining element is attached to a mounting apparatus. The mounting apparatus can be fixed or flexible. The flexible mounting apparatus includes one or more springs and one or more shock absorbers. A force neutral position of the flexible mounting apparatus is designed to be located on the predetermined ideal bar path line. The flexible mounting apparatus dissipates kinetic energy from the bar thereby reducing the bar's lateral motion relative to the ideal bar path line.The damping ratio of the mounting apparatus can be adjustable to alter the product's vibration mode to enable better control of the bar's lateral motion.

DWPF Melter No.2 Prototype Bus Bar Test Report

International Nuclear Information System (INIS)

Gordon, J.

2003-01-01

Characterization and performance testing of a prototype DWPF Melter No.2 Dome Heater Bus Bar are described. The prototype bus bar was designed to address the design features of the existing system which may have contributed to water leaks on Melter No.1. Performance testing of the prototype revealed significant improvement over the existing design in reduction of both bus bar and heater connection maximum temperature, while characterization revealed a few minor design and manufacturing flaws in the bar. The prototype is recommended as an improvement over the existing design. Recommendations are also made in the area of quality control to ensure that critical design requirements are met

Studying W‧ boson contributions in \\bar{B} \\rightarrow {D}^{(* )}{{\\ell }}^{-}{\\bar{\

Science.gov (United States)

Wang, Yi-Long; Wei, Bin; Sheng, Jin-Huan; Wang, Ru-Min; Yang, Ya-Dong

2018-05-01

Recently, the Belle collaboration reported the first measurement of the τ lepton polarization P τ (D*) in \\bar{B}\\to {D}* {τ }-{\\bar{ν }}τ decay and a new measurement of the rate of the branching ratios R(D*), which are consistent with the Standard Model (SM) predictions. These could be used to constrain the New Physics (NP) beyond the SM. In this paper, we probe \\bar{B}\\to {D}(* ){{\\ell }}-{\\bar{ν }}{\\ell } (ℓ = e, μ, τ) decays in the model-independent way and in the specific G(221) models with lepton flavour universality. Considering the theoretical uncertainties and the experimental errors at the 95% C.L., we obtain the quite strong bounds on the model-independent parameters {C}{{LL}}{\\prime },{C}{{LR}}{\\prime },{C}{{RR}}{\\prime },{C}{{RL}}{\\prime },{g}V,{g}A,{g}V{\\prime },{g}A{\\prime } and the specific G(221) model parameter rates. We find that the constrained NP couplings have no obvious effects on all (differential) branching ratios and their rates, nevertheless, many NP couplings have very large effects on the lepton spin asymmetries of \\bar{B}\\to {D}(* ){{\\ell }}-{\\bar{ν }}{\\ell } decays and the forward–backward asymmetries of \\bar{B}\\to {D}* {{\\ell }}-{\\bar{ν }}{\\ell }. So we expect precision measurements of these observables would be researched by LHCb and Belle-II.

Study of the {rho}-bar, {beta}-bar and {lambda} parameters of a light-water reactor; Etude des parametres {rho}-bar, {beta}-bar et {lambda} d'une pile a eau legere

Energy Technology Data Exchange (ETDEWEB)

Riche, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1965-09-01

The kinetic and perturbation equations are derived from the time-dependent transport equation. Kinetic equations depend only on the ratios a = {rho}-bar/{beta}-bar and b = {beta}-bar/{lambda}, which are definite, while the reactivity {rho}-bar, the delayed neutron fraction ({beta}-bar and the generation time {lambda} are expressed in terms of an arbitrary function I. The 'static' definitions of these parameters, which reduce kinetic problems to a set of purely term dependent equations, introduce the effective fraction {beta}-bar. One way of determining experimentally the ratio b is presented; it consists in analysing the power transient after a rapid variation of the reactivity, caused by the implosion of an empty glass-bull. A simple interpretation is proposed. The apparatus can be transformed easily into a reactimeter. The value of the effective delayed neutron fraction {beta}-bar has been determined by averaging the reactivity effects of a copper sheet through out the reactor core. Experimental results: b = {beta}-bar/{lambda} = 129 s{sup -1} and {beta}-bar 795.10{sup -5}, have been determined on a light-water moderated, enriched-uranium fuelled reactor. The calculated values of the effectiveness of delayed neutrons {gamma} {beta}-bar/{beta} 1.23 and the generation time {lambda} 59.10{sup -6}s agrees fairly well with the experimental results. (author) [French] Les equations de la cinetique et de la perturbation sont deduites de la theorie du transport, par l'intermediaire de la 'notion' d'importance des neutrons. La cinetique ne depend que des rapports a = {rho}-bar/{beta}-bar et b = {beta}-bar/{lambda}, qui sont parfaitement definis; par contre, la reactivite {rho}-bar, la proportion de neutrons retardes {beta}-bar et le temps de generation des neutrons prompts {lambda} s'expriment a l'aide d'une meme fonction arbitraire I. Les definitions 'statiques' de ces parametres, qui permettent de rendre compte de la cinetique par des equations dependant purement du

Efficacy of iron-supplement bars to reduce anemia in urban Indian women: a cluster-randomized controlled trial.

Science.gov (United States)

Mehta, Rajvi; Platt, Alyssa C; Sun, Xizi; Desai, Mukesh; Clements, Dennis; Turner, Elizabeth L

2017-03-01

Background: India's high prevalence of iron-deficiency anemia has largely been attributed to the local diet consisting of nonheme iron, which has lower absorption than that of heme iron. Objective: We assessed the efficacy of the consumption of iron-supplement bars in raising hemoglobin concentrations and hematocrit percentages in anemic (hemoglobin concentration Indian women of reproductive age. Design: The Let's be Well Red study was a 90-d, pair-matched, cluster-randomized controlled trial. A total of 361 nonpregnant women (age 18-35 y) were recruited from 10 sites within Mumbai and Navi Mumbai, India. All participants received anemia education and a complete blood count (CBC). Random assignment of anemic participants to intervention and control arms occurred within 5 matched site-pairs. Intervention participants received 1 iron-supplement bar (containing 14 mg Fe)/d for 90 d, whereas control subjects received nothing. CBC tests were given at days 15, 45, and 90. Primary outcomes were 90-d changes from baseline in hemoglobin concentrations and hematocrit percentages. Linear mixed models and generalized estimating equations were used to model continuous and binary outcomes, respectively. Results: Of 179 anemic participants, 136 (76.0%) completed all follow-up assessments (65 intervention and 71 control participants). Baseline characteristics were comparable by arm. Mean hemoglobin and hematocrit increases after 90 d were greater for intervention than for control participants [1.4 g/dL (95% CI: 1.3, 1.6 g/dL) and 2.7% (95% CI: 2.2%, 3.2%), respectively]. The anemia prevalence at 90 d was lower for intervention (29.2%) than for control participants (98.6%) (OR: 0.007; 95% CI: 0.001, 0.04). Conclusions: The daily consumption of an iron-supplement bar leads to increased hemoglobin concentrations and hematocrit percentages and to a lower anemia prevalence in the target population with no reported side effects. This intervention is an attractive option to combat anemia

A Modern Picture of Barred Galaxy Dynamics

Science.gov (United States)

Petersen, Michael; Weinberg, Martin; Katz, Neal

2018-01-01

Observations of disk galaxies suggest that bars are responsible for altering global galaxy parameters (e.g. structures, gas fraction, star formation rate). The canonical understanding of the mechanisms underpinning bar-driven secular dynamics in disk galaxies has been largely built upon the analysis of linear theory, despite galactic bars being clearly demonstrated to be nonlinear phenomena in n-body simulations. We present simulations of barred Milky Way-like galaxy models designed to elucidate nonlinear barred galaxy dynamics. We have developed two new methodologies for analyzing n-body simulations that give the best of both powerful analytic linear theory and brute force simulation analysis: orbit family identification and multicomponent torque analysis. The software will be offered publicly to the community for their own simulation analysis.The orbit classifier reveals that the details of kinematic components in galactic disks (e.g. the bar, bulge, thin disk, and thick disk components) are powerful discriminators of evolutionary paradigms (i.e. violent instabilities and secular evolution) as well as the basic parameters of the dark matter halo (mass distribution, angular momentum distribution). Multicomponent torque analysis provides a thorough accounting of the transfer of angular momentum between orbits, global patterns, and distinct components in order to better explain the underlying physics which govern the secular evolution of barred disk galaxies.Using these methodologies, we are able to identify the successes and failures of linear theory and traditional n-body simulations en route to a detailed understanding of the control bars exhibit over secular evolution in galaxies. We present explanations for observed physical and velocity structures in observations of barred galaxies alongside predictions for how structures will vary with dynamical properties from galaxy to galaxy as well as over the lifetime of a galaxy, finding that the transfer of angular

Consumption of calcium-fortified cereal bars to improve dietary calcium intake of healthy women: randomized controlled feasibility study.

Directory of Open Access Journals (Sweden)

Jennifer T Lee

Full Text Available Calcium is an important structural component of the skeletal system. Although an adequate intake of calcium helps to maintain bone health and reduce the risk of osteoporosis, many women do not meet recommended daily intakes of calcium. Previous interventions studies designed to increase dietary intake of women have utilized primarily dairy sources of calcium or supplements. However, lactose intolerance, milk protein allergies, or food preferences may lead many women to exclude important dairy sources of dietary calcium. Therefore, we undertook a 9 week randomized crossover design trial to examine the potential benefit of including a non-dairy source of calcium in the diet of women. Following a 3 week run-in baseline period, 35 healthy women > 18 years were randomized by crossover design into either Group I or Group II. Group I added 2 calcium-fortified cereal bars daily (total of 400 mg calcium/day (intervention to their usual diet and Group II continued their usual diet (control. At the end of 3 weeks, diets were switched for another 3 weeks. Intakes of calcium and energy were estimated from 3-day diet and supplemental diaries. Wilcoxon signed-rank tests were used for within group comparisons and Mann Whitney U tests were used for between group comparisons of calcium and energy intake. Dietary calcium was significantly higher during intervention (1071 mg/d when participants consumed 2 calcium-fortified cereal bars daily than during the baseline (720 mg/d, P <0.0001 or control diets (775 mg/d, P = 0.0001 periods. Furthermore, the addition of 2 calcium-fortified cereal bars daily for the 3 week intervention did not significantly increase total energy intake or result in weight gain. In conclusion, consumption of calcium-fortified cereal bars significantly increased calcium intake of women. Further research examining the potential ability of fortified cereal bars to help maintain and improve bone health of women is warranted.ClinicalTrials.gov NCT

H-bar and H-bar + production cross sections for the GBAR experiment

International Nuclear Information System (INIS)

Comini, P; Hervieux, P-A

2013-01-01

The production and cooling of the H-bar + ion is the key point of the GBAR experiment (Gravitational Behaviour of Antihydrogen at Rest), which aims at performing the free fall of antihydrogen atoms to measure g-bar , the acceleration of antimatter on Earth. H-bar + ions will be obtained from collisions between a positronium cloud and antiprotons delivered by the AD/ELENA facility at CERN, with intermediate formation of antihydrogen atoms. In order to optimise the experimental production of H-bar + ions, we computed the total cross sections of the two corresponding reactions, within the same theoretical framework of the Continuum Distorted Wave – Final State (CDW-FS) model. The different contributions of the H-bar excited states have been systematically investigated for different states of Ps. The results exhibit an increase of the H-bar production toward low kinetic energies, in agreement with experimental data and previous calculations, whereas the largest H-bar + production is obtained with low energy ground-state antihydrogen atoms. These theoretical predictions suggest that the overall production of H-bar + could be optimal for 2 keV antiproton impact energy, using positronium atoms prepared in the 2p state.

K-bar-mesic nuclei

International Nuclear Information System (INIS)

Dote, Akinobu; Akaishi, Yoshinori; Yamazaki, Toshimitsu

2005-01-01

New nuclei 'K-bar-Mesic Nuclei' having the strangeness are described. At first it is shown that the strongly attractive nature of K-bar N interaction is reasoned inductively from consideration of the relation between Kaonic hydrogen atom and Λ (1405) which is an excited state of hyperon Λ. The K-bar N interactions are reviewed and summarized into three categories: 1. Phenomenological approach with density dependent K-bar N interaction (DD), relativistic mean field (RMF) approach, and hybrid of them (RMF+DD). 2. Boson exchange model. 3. Chiral SU(3) theory. The investigation of some light K-bar-nuclei by Akaishi and Yamazaki using phenomenological K-bar N interaction is explained in detail. Studies by antisymmetrized molecular dynamics (AMD) approach are also presented. From these theoretical researches, the following feature of K-bar-mesic nuclei are revealed: 1) Ground state is discrete and bound by 100 MeV or more. 2) Density is very high in side the K-bar-mesic nuclei. 3) Strange structures develop which are not seen in ordinary nuclei. Finally some recent experiments to explore K-bar-mesic nuclei are reviewed. (S. Funahashi)

Effects of Gravel Bars on Nutrient Spiraling in Bedrock-Alluvium Streams

Science.gov (United States)

Iobst, B. R.; Carroll, E. P.; Furbish, D. J.

2007-05-01

The importance of the connection between nutrient transport and local stream geomorphology is becoming increasingly important. Studies have shown that the interconnectivity of nutrient cycles in the downstream direction is in part controlled by the distribution and size of gravel bars in low order streams, as hyporheic flow occurs dominantly through alternate and mid-channel gravel bars. For this investigation multiple gravel bars in a 3rd order bedrock-alluvium stream were studied to determine general relationships between nutrient spiraling and hyporheic flow. The first goal was to understand (1) the extent to which water moves through hyporheic zones and (2) the basic chemistry of the hyporheic water. The second part of the study was to understand how nutrients, notably nitrogen, are affected in their cycling by the relatively long residence times encountered in gravel bars during hyporheic flow. Wells were installed along a 600 m reach of Panther Creek, KY in selected bars, as well as in a secondary location involving a grid installation pattern in one large bar. Results have shown that hyporheic flow through gravel bars is an important factor in influencing stream chemistry. Background water chemistry surveys have shown that certain parameters, specifically ammonium and nitrogen concentrations vary downstream, and that the dominant control over these changes is gravel bar location. Rhodamine WT was used in field tracer tests to track the travel times of water through bars as well as partitioning of water between the open channel and hyporheic flows. Further tests will be conducted utilizing a stable isotope study to determine how nitrogen is affected by hyporheic flow, and what implications this has for nutrient transport. We expect results to show that the spacing and size of gravel bars is a dominant control in key nutrient spiraling parameters, namely uptake lengths and overall nitrogen cycling rates. This has implications for how natural systems will

Bar-tailed

NARCIS (Netherlands)

Duijns, S.; Hidayati, N.A.; Piersma, T.

2013-01-01

Capsule Across the European wintering range Bar-tailed Godwits Limosa lapponica lapponica selected polychaete worms and especially Ragworms Hediste diversicolor, with differences between areas due to variations in prey availability.Aims To determine the diet of Bar-tailed Godwits across their

Pembuatan Dan Analisis Exciter Generator Rf Untuk Siklotron Proton Decy-13

OpenAIRE

Prajitno, Prajitno

2011-01-01

PEMBUATAN DAN ANALISIS EXCITER GENERATOR RF UNTUK SIKLOTRON PROTON DECY-13.Telah dilakukan analisis dan pembuatan exciter generator RF untuk siklotron proton 13MeV. Generator RFakan digunakan sebagai sumber tegangan pemercepat bolak-Balik siklotron DECY-13 rancangan PTAPBBATAN.Berdasarkan dokumen rancangan dasar yang telah dibuat siklotron Decy-13 akan menggunakanmedan magnet 1,275 Tesla, sehingga frekuensi generator RF bila menggunakan harmonik keempat adalah77,667 MHz. Salah satu teknik pem...

Possible heavy tetraquarks qQq-barQ-bar, qqQ-barQ-bar and qQQ-barQ-bar

International Nuclear Information System (INIS)

Cui Ying; Chen Xiaolin; Deng Weizhen; Zhu Shilin

2007-01-01

Assuming X(3872) is a qcq-barc-bar tetraquark and using its mass as input, the authors perform a schematic study of the masses of possible heavy tetraquarks using the color-magnetic interaction with the flavor symmetry breaking corrections. (authors)

On Modified Bar recursion

DEFF Research Database (Denmark)

Oliva, Paulo Borges

2002-01-01

Modified bar recursion is a variant of Spector's bar recursion which can be used to give a realizability interpretation of the classical axiom of dependent choice. This realizability allows for the extraction of witnesses from proofs of forall-exists-formulas in classical analysis. In this talk I...... shall report on results regarding the relationship between modified and Spector's bar recursion. I shall also show that a seemingly weak form of modified bar recursion is as strong as "full" modified bar recursion in higher types....

Effects of a groyne field on inner bar dynamics: Anglet, France

Science.gov (United States)

de Santiago, Inaki; Morichon, Denis; Arnould, Philippe

2017-04-01

Groynes are usually designed to limit beach erosion by mitigating longshore sediment transport. However, little is known about their side effects on inner-bar morphodynamics in double sandbar systems. While most of the studies are focused on natural systems where the outer-bar morphology drives inner-bar dynamics (offshore to nearshore process), this work focuses on the role of groynes on the inner bar dynamics (nearshore to offshore process). The study is based on 3-years field observations carried out at the beach of Anglet in the south-west of France. This engineered beach is 4 km long, limited by a rocky headland in the south and a 1 km long jetty at the entrance of the Adour river in the North. The study area concerns the south part of the beach and includes a series of four groynes, unevenly spaced and extending about 100 m seaward. Morphology changes observations were derived from images collected with a video system (http://sirena.univ-pau.fr/), and bi-annual topo-Bathymetric surveys. A special attention was paid to study the mechanisms controlling the observed morphology changes using the XBeach numerical model. Data analysis reveals that the study site is dominated by a double sandbar system. Both bars can evolve from reasonably alongshore-uniform to crescentic bars. Surprisingly, the beach may show episodes where the inner bar evolves from alonghsore uniform to non-uniform despite an alongshore uniform outer bar. Numerical results corroborate that the formation of inner bar crescentic features can be formed without the presence of an outer non-uniform bar under certain wave conditions for the study site. This study shows that inner bar evolution in the presence of groynes can be controlled by topographic rip channels and not only by morphological coupling as usually observed on natural double sandbar systems.

[Glycemic response to consumption of a cereals and legume (Phaseolus vulgaris) bar on healthy individuals].

Science.gov (United States)

Zambrano, Rosaura; Granito, Marisela; Valero, Yolmar

2013-06-01

The objective of this work was to formulate a cereals and legume (Phaseolus vulgaris) bar and assess its impact on the glycemic response of healthy individuals, in order to contribute to the healthy food supply beneficial to consumers. A mixture of cereals (corn and oats) and different percentages (20 and 30%) of Phaseolus vulgaris was used to formulate the bar. Additionally, a legume cereal bar without legumes (bar control) was prepared. The bar with 30% of Phaseolus vulgaris was selected through sensory evaluation, being scored with better flavor and texture. This combination of cereals and legumes aminoacid improves complementation and reaches the formulation criteria previously established. Chemical characterization indicated a higher protein content in the bar with 30% of Phaseolus vulgaris (13.55%) relative to the bar control (8.5%). The contents of fat, ash and dietary fiber did not differ between the two bars evaluated. However, the soluble fiber and resistant starch of the selected bar was a 32.05% and 18.67%, respectively, than in the control bar; this may contribute to decreasing the rate of glucose uptake. The selected bar presented a low glycemic index (49) and intermediate glycemic load (12.0) in healthy volunteers, which could lead to a possible reduction in the rate of absorption of glucose into the bloodstream, associated with a carbohydrate content of slow absorption. This bar represents a proposal of a healthy snack for the consumer.

The bridge technique for pectus bar fixation: a method to make the bar un-rotatable.

Science.gov (United States)

Park, Hyung Joo; Kim, Kyung Soo; Moon, Young Kyu; Lee, Sungsoo

2015-08-01

Pectus bar rotation is a major challenge in pectus repair. However, to date, no satisfactory technique to completely eliminate bar displacement has been introduced. Here, we propose a bar fixation technique using a bridge that makes the bar unmovable. The purpose of this study was to determine the efficacy of this bridge technique. A total of 80 patients underwent pectus bar repair of pectus excavatum with the bridge technique from July 2013 to July 2014. The technique involved connecting 2 parallel bars using plate-screws at the ends of the bars. To determine bar position change, the angles between the sternum and pectus bars were measured on postoperative day 5 (POD5) and 4 months (POM4) and compared. The mean patient age was 17.5 years (range, 6-38 years). The mean difference between POD5 and POM4 were 0.23° (P=.602) and 0.35° (P=.338) for the upper and lower bars, respectively. Bar position was virtually unchanged during the follow-up, and there was no bar dislocation or reoperation. A "bridge technique" designed to connect 2 parallel bars using plates and screws was demonstrated as a method to avoid pectus bar displacement. This approach was easy to implement without using sutures or invasive devices. Copyright © 2015 Elsevier Inc. All rights reserved.

Analisis Aliran Daya Berbasis Injeksi Arus dalam Bentuk Vektor

Directory of Open Access Journals (Sweden)

Ahmad Wira Satriawan

2017-11-01

Full Text Available Tulisan ini memaparkan hasil penelitian yang telah dilakukan untuk membandingkan metode analisis aliran daya berbasis injeksi arus dalam bentuk vektor dengan format polar dan rektangular. Penelitian ini dilakukan untuk memperoleh metode analisa aliran daya dengan perhitungan yang lebih cepat dan akurat, serta iterasi yang lebih sedikit. Metode iterasi Newton Raphson diadopsi dalam penelitian ini dan bahasa pemrograman Python serta library komputasinya digunakan. Analisis terhadap karakteristik konvergensi dari kedua format dilakukan pada IEEE 14-bus Test System. Dari penelitian ini diperoleh hasil bahwa format rektangular lebih unggul dibandingkan format polar untuk kasus yang diteliti.

Search for W→cs-bar, Z→cc-bar,bb-bar in muon-jet events at the CERN proton-antiproton collider

International Nuclear Information System (INIS)

Ransdell, J.

1988-01-01

A search for quark decays of the W and Z particles produced in proton-antiproton collisions at √s of 630 GeV in the UA1 experiment at the CERN collider is described. The search was made in the channels W→cs-bar, Z→cc-bar,bb-bar where b and c quarks were identified by the presence of a high-p/sub T/ muon in or near a jet. Although these decay channels avoid the copious background of QCD produced light quark and gluon jets, it was not possible to detect a W or Z signal because of the large cross section for strong cc-bar and bb-bar production

Study of the {rho}-bar, {beta}-bar and {lambda} parameters of a light-water reactor; Etude des parametres {rho}-bar, {beta}-bar et {lambda} d'une pile a eau legere

Energy Technology Data Exchange (ETDEWEB)

Riche, R. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1965-09-01

The kinetic and perturbation equations are derived from the time-dependent transport equation. Kinetic equations depend only on the ratios a = {rho}-bar/{beta}-bar and b = {beta}-bar/{lambda}, which are definite, while the reactivity {rho}-bar, the delayed neutron fraction ({beta}-bar and the generation time {lambda} are expressed in terms of an arbitrary function I. The 'static' definitions of these parameters, which reduce kinetic problems to a set of purely term dependent equations, introduce the effective fraction {beta}-bar. One way of determining experimentally the ratio b is presented; it consists in analysing the power transient after a rapid variation of the reactivity, caused by the implosion of an empty glass-bull. A simple interpretation is proposed. The apparatus can be transformed easily into a reactimeter. The value of the effective delayed neutron fraction {beta}-bar has been determined by averaging the reactivity effects of a copper sheet through out the reactor core. Experimental results: b = {beta}-bar/{lambda} = 129 s{sup -1} and {beta}-bar 795.10{sup -5}, have been determined on a light-water moderated, enriched-uranium fuelled reactor. The calculated values of the effectiveness of delayed neutrons {gamma} {beta}-bar/{beta} 1.23 and the generation time {lambda} 59.10{sup -6}s agrees fairly well with the experimental results. (author) [French] Les equations de la cinetique et de la perturbation sont deduites de la theorie du transport, par l'intermediaire de la 'notion' d'importance des neutrons. La cinetique ne depend que des rapports a = {rho}-bar/{beta}-bar et b = {beta}-bar/{lambda}, qui sont parfaitement definis; par contre, la reactivite {rho}-bar, la proportion de neutrons retardes {beta}-bar et le temps de generation des neutrons prompts {lambda} s'expriment a l'aide d'une meme fonction arbitraire I. Les definitions 'statiques' de ces parametres, qui permettent de rendre compte de la

ANALISIS CLUSTER K-MEANS DALAM PENGELOMPOKAN KEMAMPUAN MAHASISWA

Directory of Open Access Journals (Sweden)

B. Poerwanto

2016-12-01

Full Text Available Abstract. Cluster Analysis, K-Means Algorithm, Student Classification. This study aims to classify students based on learning outcomes for subject the basic of statistics (DDS, which is measured based on attendance, task, midterm (UTS, and final exams (UAS to further used to evaluate learning for subjects that require analysis of quantitative . This study uses k-means cluster analysis to classify the students into three groups based on learning outcomes. After grouped, there are 3 people in the low category, 27 in the medium category and over 70% in the high category.Abstrak. Analisis Cluster K-Means dalam Pengelompokan Kemampuan Mahasiswa. Pene-litian ini bertujuan untuk mengelompokkan mahasiswa berdasarkan hasil belajar mata kuliah dasar-dasar statistika (DDS yang diukur berdasarkan variabel nilai kehadiran, tugas, ujian tengah semester (UTS, dan ujian akhir semester (UAS untuk selanjutnya digunakan untuk mengevaluasi pembelajaran untuk mata kuliah yang membutuhkan kemampuan analisis kuantititatif yang baik. Penelitian ini menggunakan analisis cluster k-means dalam mengelompokkan mahasiswa ke dalam tiga kelompok berdasarkan hasil belajarnya. Seteleh dikelompokkan, terdapat 3 orang yang masuk pada kategori rendah, 27 orang pada kategori sedang dan lebih dari 70% pada kategori tinggi.Kata Kunci: Cluster Analysis, K-Means Algoritma, Klasifikasi Mahasiswa, Universitas Cokroaminoto Palopo

Klasifikasi Kecamatan Berdasarkan Nilai Akhir SMA/MA di Kabupaten Aceh Selatan Menggunakan Analisis Diskriminan

Directory of Open Access Journals (Sweden)

Fitriana A.R.

2015-11-01

Full Text Available Analisis diskriminan merupakan bagian dari analisis peubah ganda. Analisis diskriminan digunakan untuk memodelkan variabel tak bebas yang bersifat kualitatif dengan variabel bebas yang bersifat kuantitatif. Pada penelitian ini, analisis diskriminan lebih dari dua kelompok diterapkan pada data nilai akhir SMA/MA di Kabupaten Aceh Selatan yang bertujuan untuk mendapatkan model untuk pengklasifikasian kecamatan. Pengklasifikasian ini bertujuan untuk melihat perbedaan kualitas siswa SMA/MA yang berada di masing-masing kecamatan Kabupaten Aceh Selatan berdasarkan data nilai akhir. Variabel tak bebas yang digunakan berupa klasifikasi kecamatan berdasarkan rata-rata jumlah nilai akhir SMA/MA yang berada di masing-masing kecamatan yang dibentuk dengan K-Means Cluster. Sedangkan variabel bebas yang digunakan adalah data rata-rata nilai akhir SMA/MA untuk setiap mata pelajaran yang diujiankan pada masing-masing jurusan setiap kecamatan. Model yang didapatkan adalah dua model diskriminan untuk jurusan IPA dan IPS.

Lung Middle Lobe Laceration Needing Lobectomy as Complication of Nuss Bar Removal.

Science.gov (United States)

Henry, Brice; Lacroix, Valérie; Pirotte, Thierry; Docquier, Pierre-Louis

2018-01-01

Minimally invasive procedure for the treatment of pectus excavatum as described by Nuss has been used from 1987. The bar initially introduced blindly is now introduced under thoracoscopic control to increase safety of the procedure. It is usually removed two to three years after its insertion in a one-day procedure. Complications of the bar removal are rare but potentially serious. We report the case of a serious complication which occurred immediately after the Nuss bar removal. A 15-year-old boy underwent a Nuss procedure for a severe pectus excavatum without relevant complication. The bar has been removed two years after its insertion in a minimally invasive procedure. Unfortunately, he developed in the immediate postoperative period a hemopneumothorax due to a right middle lobe laceration which required a middle lobectomy by thoracotomy for hemostasis. Lesions of intrathoracic organs are a rare but potentially serious complication of the removal of the Nuss bar. We now propose to perform this procedure under thoracoscopic control to avoid it. In our experience, adhesions between the bar and the pleura are always present, and those with potential risk for bleeding or inducing intrathoracic organ lesions are suppressed prior to the bar removal.

Bar-spheroid interaction in galaxies

Science.gov (United States)

Hernquist, Lars; Weinberg, Martin D.

1992-01-01

N-body simulation and linear analysis is employed to investigate the secular evolution of barred galaxies, with emphasis on the interaction between bars and spheroidal components of galaxies. This interaction is argued to drive secular transfer of angular momentum from bars to spheroids, primarily through resonant coupling. A moderately strong bar, having mass within corotation about 0.3 times the enclosed spheroid mass, is predicted to shed all its angular momentum typically in less than about 10 exp 9 yr. Even shorter depletion time scales are found for relatively more massive bars. It is suggested either that spheroids around barred galaxies are structured so as to inhibit strong coupling with bars, or that bars can form by unknown processes long after disks are established. The present models reinforce the notion that bars can drive secular evolution in galaxies.

On the Relation between Spector's Bar Recursion and Modified Bar Recursion

DEFF Research Database (Denmark)

Oliva, Paulo Borges

2002-01-01

We introduce a variant of Spector's Bar Recursion in finite types to give a realizability interpretation of the classical axiom of dependent choice allowing for the extraction of witnesses from proofs of Sigma_1 formulas in classical analysis. We also give a bar recursive definition of the fan...... functional and study the relationship of our variant of Bar Recursion with others....

PENGUKURAN KINERJA PERUSAHAAN PT. HADJI KALLA DENGAN MENGGUNAKAN ANALISIS ECONOMIC VALUE ADDED

OpenAIRE

2013-01-01

Tujuan dari penelitian ini adalah mengetahui kinerja Economic Value Added (EVA) yang dicapai oleh perusahaan PT. Hadji Kalla, sedangkan metode analisis yang digunakan dalam penelitian ini adalah analisis perkembangan Economic Value Added (EVA), Net Operating Profit After Tax (NOPAT) dan The purpose of this study was to determine the performance of the Economic Value Added (EVA), which is achieved by the company PT. Hadji Kalla...

Matlab/simMechanics based control of four-bar passive lower-body mechanism for rehabilitation

Directory of Open Access Journals (Sweden)

Ashish Singla

2016-09-01

Full Text Available In recent times, use of wearable devices is becoming popular for providing precise ways of rehabilitation. The focus of this paper is to propose a passive lower body mechanism using a four-bar linkage, which can be actuated via the hip joint to move the other two joints at knee and ankle as well. Simulations are performed here by considering an average male human (height six feet by modelling the gait cycle in CAD software and executing the control strategy in the SimMechanics, which provides a convenient way to study without use of detailed computational mathematics. The study of the controller aspects of the passive mechanism is presented with both PD and PID controllers with auto- and manual-tuned gains. Significant reduction in actuator torques is observed with the manually-tuned PID controller over automatically-tuned PID controller with marginal degradation in the overshoot and settling time.

Dynamics of a stellar bar

International Nuclear Information System (INIS)

Miller, R.H.; Smith, B.F.

1979-01-01

The dynamical properties of a prolate bar have been studied by means of a three-dimensional computer model. The bar pattern rotates in the sense of the total angular momentum. The mean particle motion is a rapid streaming in the direction of pattern rotation as seen from a frame that rotates with the bar. Rotation rates that would be inferred from observation are significantly (2--3 times) faster than the pattern rotation speed. Velocity dispersions are anisotropic with the largest component along the bar. Particles oscillate in the bar potential significantly faster than pattern rotation: typical oscillation frequencies are around ω/sub z/=ω/sub y/=6Ω and ω/sub x/=3Ω where z is the direction of angular momentum, x lies along the bar, and Ω is the pattern angular velocity. About 25% of the star orbits are near 2:2:1 resonance with the slow motion along the bar. Particle motion is highly ordered in the bar:the ratio t=T/sub mean//vertical-barWvertical-bar is 0.21--0.24. Observable properties are described; where comparisons can be made, observable properties are in agreement with observations of brightness contours, velocity fields, and velocity dispersions. The bar has nearly exponential density profiles

New results from Fermilab E866 (NuSea) for d-bar/u-bar

International Nuclear Information System (INIS)

Isenhower, L. D.

1999-01-01

The Fermilab dimuon experiment 866/NuSea measured Drell-Yan yields from an 800 GeV/c proton beam incident on liquid hydrogen and deuterium targets. Over 370,000 Drell-Yan muon pairs were recorded. From these data, the ratio of anti-down (d-bar) to anti-up (u-bar) quark distributions in the proton sea is determined over a wide range in Bjorken-x. A strong x dependence is observed in the ratio d-bar/u-bar, showing substantial enhancement of d-bar with respect to u-bar for x < 0.2. The results presented here for the full data sets confirm previously published results from E866 and are compared with parametrizations of parton distribution functions calculated both before and after the publication of the high-mass E866 data

Design and Evaluation of a Prosthetic Knee Joint Using the Geared Five-Bar Mechanism.

Science.gov (United States)

Sun, Yuanxi; Ge, Wenjie; Zheng, Jia; Dong, Dianbiao

2015-11-01

This paper presents the mechanical design, dynamics analysis and ankle trajectory analysis of a prosthetic knee joint using the geared five-bar mechanism. Compared with traditional four-bar or six-bar mechanisms, the geared five-bar mechanism is better at performing diverse movements and is easy to control. This prosthetic knee joint with the geared five-bar mechanism is capable of fine-tuning its relative instantaneous center of rotation and ankle trajectory. The centrode of this prosthetic knee joint, which is mechanically optimized according to the centrode of human knee joint, is better in the bionic performance than that of a prosthetic knee joint using the four-bar mechanism. Additionally, the stability control of this prosthetic knee joint during the swing and stance phase is achieved by a motor. By adjusting the gear ratio of this prosthetic knee joint, the ankle trajectories of both unilateral and bilateral amputees show less deviations from expected than that of the four-bar knee joint.

Impartial Triangular Chocolate Bar Games

OpenAIRE

Miyadera, Ryohei; Nakamura, Shunsuke; Fukui, Masanori

2017-01-01

Chocolate bar games are variants of the game of Nim in which the goal is to leave your opponent with the single bitter part of the chocolate bar. The rectangular chocolate bar game is a thinly disguised form of classical multi-heap Nim. In this work, we investigate the mathematical structure of triangular chocolate bar games in which the triangular chocolate bar can be cut in three directions. In the triangular chocolate bar game, a position is a $\\mathcal{P}$-position if and only if $x \\oplu...

Test of bar window with internal bars free from the glass surfaces

DEFF Research Database (Denmark)

Schultz, Jørgen Munthe

1998-01-01

A sealed glazing unit with 3 horisontal and 3 vertical bars and a reference glazing without bars have been tested in a guarded hotbox. The difference in measured heat loss coefficient between the two test objects is a measure of the thermal influence of the bars. The difference in heat loss...

Triple bar, high efficiency mechanical sealer

Science.gov (United States)

Pak, Donald J.; Hawkins, Samantha A.; Young, John E.

2013-03-19

A clamp with a bottom clamp bar that has a planar upper surface is provided. The clamp may also include a top clamp bar connected to the bottom clamp bar, and a pressure distribution bar between the top clamp bar and the bottom clamp bar. The pressure distribution bar may have a planar lower surface in facing relation to the upper surface of the bottom clamp bar. An object is capable of being disposed in a clamping region between the upper surface and the lower surface. The width of the planar lower surface may be less than the width of the upper surface within the clamping region. Also, the pressure distribution bar may be capable of being urged away from the top clamp bar and towards the bottom clamp bar.

ANALISIS HARGA POKOK PRODUKSI DAN PENERAPAN TARGET COSTING PADA UD WAJUKU MAKASSAR

OpenAIRE

-, CHAIDIR HAFID

2017-01-01

ABSTRAK Analisis Harga Pokok Produksi dan Penerapan Target Costing pada UD Wajuku Makassar The Analysis of The Cost of Goods Manufactured and Implementation of Target Costing in UD Wajuku Makassar Chaidir Hafid Asri Usman Syahrir Penelitian ini bertujuan untuk mengetahui perhitungan harga pokok produksi baju kaos polos sebelum dan setelah penerapan metode target costing pada UD Wajuku Makassar. Metode pengumpulan data yang digunakan adalah dokumentasi. Metode analisis dat...

Observations of barred spirals

International Nuclear Information System (INIS)

Elmegreen, D.M.

1990-01-01

Observations of barred spiral galaxies are discussed which show that the presence of a bar increases the likelihood for grand design spiral structure only in early Hubble types. This result is contrary to the more common notion that grand design spiral structure generally accompanies bars in galaxies. Enhanced deprojected color images are shown which reveal that a secondary set of spiral arms commonly occurs in barred galaxies and also occasionally in ovally distorted galaxies. 6 refs

vertical bar Vub vertical bar from exclusive semileptonic B→π decays

International Nuclear Information System (INIS)

Flynn, Jonathan M.; Nieves, Juan

2007-01-01

We use Omnes representations of the form factors f + and f 0 for exclusive semileptonic B→π decays, paying special attention to the treatment of the B* pole and its effect on f + . We apply them to combine experimental partial branching fraction information with theoretical calculations of both form factors to extract vertical bar V ub vertical bar. The precision we achieve is competitive with the inclusive determination and we do not find a significant discrepancy between our result, vertical bar V ub vertical bar=(3.90+/-0.32+/-0.18)x10 -3 , and the inclusive world average value (4.45+/-0.20+/-0.26)x10 -3 [Heavy Flavor Averaging Group (HFAG), hep-ex/0603003

Spectroscopy of snake states using a graphene Hall bar

Energy Technology Data Exchange (ETDEWEB)

Milovanović, S. P., E-mail: slavisa.milovanovic@gmail.com; Ramezani Masir, M., E-mail: mrmphys@gmail.com; Peeters, F. M., E-mail: francois.peeters@ua.ac.be [Departement Fysica, Universiteit Antwerpen, Groenenborgerlaan 171, B-2020 Antwerpen (Belgium)

2013-12-02

An approach to observe snake states in a graphene Hall bar containing a pn-junction is proposed. The magnetic field dependence of the bend resistance in a ballistic graphene Hall bar structure containing a tilted pn-junction oscillates as a function of applied magnetic field. We show that each oscillation is due to a specific snake state that moves along the pn-interface. Furthermore, depending on the value of the magnetic field and applied potential, we can control the lead in which the electrons will end up and hence control the response of the system.

Determining vertical bar Vub vertical bar from the B-bar→Xulν-bar dilepton invariant mass spectrum

International Nuclear Information System (INIS)

Bauer, Christian W.; Ligeti, Zoltan; Luke, Michael

2001-01-01

The invariant mass spectrum of the lepton pair in inclusive semileptonic B-bar→X u lν-bar decay yields a model independent determination of vertical bar V ub vertical bar. Unlike the lepton energy and hadronic invariant mass spectra, nonperturbative effects are only important in the resonance region, and play a parametrically suppressed role when dΓ/dq 2 is integrated over q 2 >(m B -m D ) 2 , which is required to eliminate the B-bar→X c lν-bar background. We discuss these backgrounds for q 2 slightly below (m B -m D ) 2 , and point out that instead of q 2 >(m B -m D ) 2 =11.6 GeV 2 , the cut can be lowered to q 2 > or approx. 10.5 GeV 2 . This is important experimentally, particularly when effects of a finite neutrino reconstruction resolution are included

Analisis Komoditi Unggulan Subsektor Tanaman Pangan di Sumatera Utara Tahun 2010 – 2014

OpenAIRE

Sinaga, Terry Praganda

2016-01-01

Tujuan penelitian ini adalah untuk mengetahui perkembangan produksi komoditi tanaman pangan selama periode tersebut sehingga dapat menganalisis komoditi subsektor tanaman pangan yang menjadi unggulan di Sumatera Utara. Komoditi unggulan tersebut juga dijabarkan untuk setiap kabupatem/kota yang ada di Sumatera Utara. Metode yang digunakan yaitu secara Convenience Sampling, dan metode analisis data dengan menggunakan analisis Location Quotient. Hasil penelitian menyimpulkan ba...

Ultrasound-Guided Bar Edge Labeling in the Perioperative Assessment of Nuss Bar Removal.

Science.gov (United States)

Incerti, Filippo; Bertocchini, Alessia; Ghionzoli, Marco; Messineo, Antonio

2017-12-01

Nuss bar removal after minimally invasive repair of pectus excavatum in patients where bar ends are not palpable, can be a challenging procedure for the surgeon; a blind dissection toward the bar edges may lead to intercostal vessels or deep intercostal muscle injuries. In this article, we describe a fast, repeatable, low-cost technique to detect bar edge and stabilizers. A perioperative scan is performed by means of a portable ultrasonograph a few minutes before the operation. The bar edge stabilizer is detected as a hyperechogenic image with a concentric crescent while the bar edge is detected as a hyperechogenic dashed line with net edges. The scan is performed, and the actual projection on the skin of the metal plaque bulk is then labeled on the patient's chest by an ink marker. We believe that this method may improve morbidity, operative time, and consequently, hospitalization length and costs.

A bar coding system for environmental projects

International Nuclear Information System (INIS)

Barber, R.B.; Hunt, B.J.; Burgess, G.M.

1988-01-01

This paper presents BeCode systems, a bar coding system which provides both nuclear and commercial clients with a data capture and custody management program that is accurate, timely, and beneficial to all levels of project operations. Using bar code identifiers is an essentially paperless and error-free method which provides more efficient delivery of data through its menu card-driven structure, which speeds collection of essential data for uploading to a compatible device. The effects of this sequence include real-time information for operator analysis, management review, audits, planning, scheduling, and cost control

Impact of a Structural Intervention to Address Alcohol Use Among Gay Bar Patrons in San Francisco: The PACE Study.

Science.gov (United States)

Charlebois, Edwin D; Plenty, Albert H; Lin, Jessica; Ayala, Alicia; Hecht, Jennifer

2017-11-01

We evaluated the impact on alcohol intake and blood alcohol concentration (BAC) of a multi-level structural intervention to increase the availability of free water, coupled with messaging on pacing alcohol intake and normative feedback of blood alcohol concentration in a convenience sample of gay bars in San Francisco. Participants (n = 1,293) were recruited among exiting patrons of four gay bars (two intervention bars and two control bars). Participants were surveyed on alcohol intake and BAC was measured by breathalyzer. Prior to the intervention there were no significant differences in baseline alcohol measures between intervention and control bars. Post-intervention there were significant differences on objective and subjective measures of alcohol consumption: 30% of intervention bar participants had BAC% levels over the legal driving limit (0.08%) compared to 43% of control bar participants, p < 0.0001 and 78% of intervention bar participants were above the AUDIT-C cut-off for hazardous drinking compared to 87% in control bars, p < 0.001.

Measurement of $\\sigma_{t\\bar{t}b\\bar{b}}/\\sigma_{t\\bar{t}jj}$ ratio at 13 TeV with the CMS Detector

CERN Document Server

Jo, Young-kwon

2016-01-01

The measurement of the cross section ratio $\\sigma_{t\\bar{t}b\\bar{b}}/\\sigma_{t\\bar{t}jj}$ is presented using a data sample corresponding to an integrated luminosity of 2.3~$\\rm{fb}^{-1}$ collected in pp collisions at \\\\ $\\sqrt{s}$ = 13TeV with the CMS detector at the LHC. Events with two leptons and at least four reconstructed jets, including at least two identified as b quark jets, in the final state are selected. The measured ratio is $0.022 \\pm 0.003$(stat.)$\\pm0.006$(syst.) in the full phase space. The measured cross section $\\sigma_{t\\bar{t}b\\bar{b}}$ is $3.9 \\pm 0.6$(stat.)$\\pm1.3$(syst.) pb and $\\sigma_{t\\bar{t}jj}$ is $176 \\pm 5$(stat.)$ \\pm 33 $(syst.) pb.

77 FR 49818 - Agency Information Collection Activities; Proposed Collection; Comment Request; Bar Code Label...

Science.gov (United States)

2012-08-17

...] Agency Information Collection Activities; Proposed Collection; Comment Request; Bar Code Label... allow 60 days for public comment in response to the notice. This notice solicits comments on the bar... technology. Bar Code Label Requirement for Human Drug and Biological Products--(OMB Control Number 0910-0537...

The cc-bar and bb-bar spectroscopy in the two-step potential model

International Nuclear Information System (INIS)

Kulshreshtha, D.S.; Kaiserslautern Univ.

1984-07-01

We investigate the spectroscopy of the charmonium (cc-bar) and bottonium (bb-bar) bound states in a static flavour independent nonrelativistic quark-antiquark (qq-bar) two-step potential model proposed earlier. Our predictions are in good agreement with experimental data and with other theoretical predictions. (author)

Effect of Insoles with a Toe-Grip Bar on Toe Function and Standing Balance in Healthy Young Women: A Randomized Controlled Trial

Directory of Open Access Journals (Sweden)

Hideki Nakano

2017-01-01

Full Text Available Objective. The aim of this randomized controlled study was to investigate the effects of insoles with a toe-grip bar on toe function and standing balance in healthy young women. Methods. Thirty female subjects were randomly assigned to an intervention group or a control group. The intervention group wore shoes with insoles with a toe-grip bar. The control group wore shoes with general insoles. Both groups wore the shoes for 4 weeks, 5 times per week, 9 hours per day. Toe-grip strength, toe flexibility, static balance (total trajectory length and envelope area of the center of pressure, and dynamic balance (functional reach test were measured before and after the intervention. Results. Significant interactions were observed for toe-grip strength and toe flexibility (F=12.53, p<0.01; F=5.84, p<0.05, resp., with significant improvement in the intervention group compared with that in the control group. Post hoc comparisons revealed that both groups showed significant improvement in toe-grip strength (p<0.01 and p<0.05, resp., with higher benefits observed for the intervention group (p<0.01. Conversely, no significant interaction was observed in the total trajectory length, envelope area, and functional reach test. Conclusions. This study suggests that insoles with a toe-grip bar contribute to improvements in toe-grip strength and toe flexibility in healthy young women.

Short-term hunger intensity changes following ingestion of a meal replacement bar for weight control.

Science.gov (United States)

Rothacker, Dana Q; Watemberg, Salo

2004-05-01

Meal replacement products for weight loss are popular and safe for most unsupervised consumers desiring to lose weight. Previously we reported that the thickness of meal replacement diet shakes had a direct and significant effect on hunger intensity during the first 2 h and that hunger intensity scores for liquid meal replacements were significantly below baseline for 3 h following consumption (Mattes & Rothacker, 2001) This study uses the same protocol to investigate meal replacement bars designed for overweight consumers. Subjects were prescreened to include only those that normally ate breakfast and liked chocolate. The bar used in this study contained 250 calories (about 30 more than most liquid diet shakes), 4 g dietary fiber, 14 g protein and 8 g fat. Subjects were instructed to consume the entire bar with a glass of water following an overnight fast when they would normally consume their first meal of the day and to assess their hunger on a 1 (not hungry at all) to 9 (as hungry as I have ever felt) scale before consumption, immediately after and hourly for 6 h (only on typical weekdays). Similar assessments were made for the perception of stomach fullness (1=empty, 9=extremely full), strength of the desire to eat (1=no desire, 9=extremely strong) and thirst (1=not at all thirsty, 9=extremely thirsty). One-hundred and eight subjects (23 male and 85 female) completed the study. No gender satiety differences were found. Hunger ratings and desire to eat remained significantly below baseline for 5 h following consumption. Stomach fullness scores were significantly above baseline for 5 h. Thirst scores were significantly below baseline for 3 h. In conclusion, although the meal replacement diet bars contained only 30 additional calories than liquids, they provided an additional 2 h of hunger suppression from baseline that may have an impact on overall weightloss success. These results support superior short-term hunger control with solid meal replacements.

Development of an effective pinch bar

CSIR Research Space (South Africa)

Ottermann, RW

2003-02-01

Full Text Available . ....................................10 Figure 3-3: Layout of lightweight pinch bar extruded fibreglass tube. ..................................11 Figure 3-4: XDM lightweight pinch bar with manufactured glass fibre bar. ..........................12 Figure 3-5: XDM lightweight pinch... bar with extruded glass fibre tube. ................................12 Figure 3-6: Stiffness of a 2.8m lightweight pinch bar with an extruded glass fibre tube and a 25mm steel pinch bar...

$\\chi^{\\vphantom\\dagger}_{c0}(3915)$ As the Lightest $c\\bar c s \\bar s$ State

CERN Document Server

Lebed, Richard F.

2016-05-23

The state $\\chi^{\\vphantom\\dagger}_{c0}(3915)$ has recently been demoted by the Particle Data Group from its previous status as the conventional $c\\bar c$ $2 {}^3P_0$ state, largely due to the absence of expected $D\\bar D$ decays. We propose that $\\chi^{\\vphantom\\dagger}_{c0}(3915)$ is actually the lightest $c\\bar c s \\bar s$ state, and calculate the spectrum of such states using the diquark model, identifying many of the observed charmoniumlike states that lack open-charm decay modes as $c\\bar c s \\bar s$. Among other results, we argue that $Y(4140)$ is a $J^{PC} = 1^{++}$ $c\\bar c s \\bar s$ state that has been not been seen in two-photon fusion largely as a consequence of the Landau-Yang theorem.

FLUVIAL PROCESSES IN ATTACHMENT BARS IN THE UPPER PARANÁ RIVER, BRAZIL

Directory of Open Access Journals (Sweden)

Vanessa Cristina Dos Santos

2017-08-01

Full Text Available Bars are semi-submerged fluvial forms associated with the availability of sediments and a temporal dynamic, whose dimensions are controlled by the flow and depth of the channel.  Attachment bars are very common in large anabranching river systems and play an important role in island formation and ecology. The Upper Paraná River exhibits an anabranching pattern characterized by channels of different sizes, separated by islands and bars. The objective of this work is to present the processes involved in the formation and development of attachment bars in Santa Rosa Island, situated in Porto Rico, State of Parana, Southern Brazil. Acquisition campaigns were performed to obtain data on channel hydraulics (ADCP equipment, morphometry (Echo-sound profiles and textural parameters (grain-size analyses at high and medium water levels. Santa Rosa Island divides the flow into two channels of distinct hydraulic and sedimentary dynamics. Flow diversion produces a decrease in flow velocity and consequent sediment deposition near the upstream end of Santa Rosa Island. The formation and maintenance of attachment bars in Santa Rosa Island is related to flow competence reduction and the occurrence of divergent currents. Vegetation cover and flow regime control its permanence. 

Study of the ρ-bar, β-bar and Λ parameters of a light-water reactor

International Nuclear Information System (INIS)

Riche, R.

1965-09-01

The kinetic and perturbation equations are derived from the time-dependent transport equation. Kinetic equations depend only on the ratios a = ρ-bar/β-bar and b = β-bar/Λ, which are definite, while the reactivity ρ-bar, the delayed neutron fraction (β-bar and the generation time Λ are expressed in terms of an arbitrary function I. The 'static' definitions of these parameters, which reduce kinetic problems to a set of purely term dependent equations, introduce the effective fraction β-bar. One way of determining experimentally the ratio b is presented; it consists in analysing the power transient after a rapid variation of the reactivity, caused by the implosion of an empty glass-bull. A simple interpretation is proposed. The apparatus can be transformed easily into a reactimeter. The value of the effective delayed neutron fraction β-bar has been determined by averaging the reactivity effects of a copper sheet through out the reactor core. Experimental results: b = β-bar/Λ = 129 s -1 and β-bar 795.10 -5 , have been determined on a light-water moderated, enriched-uranium fuelled reactor. The calculated values of the effectiveness of delayed neutrons γ β-bar/β 1.23 and the generation time Λ 59.10 -6 s agrees fairly well with the experimental results. (author) [fr

Measurement of vertical bar Vub vertical bar in semi-inclusive charmless B → πX decays

International Nuclear Information System (INIS)

Kim, C.S.; Lee, Jake; Oha, Sechul

2002-01-01

We study semi-inclusive charmless decays B → πX, where X does not contain a charm (anti)quark. The mode B-bar 0 → π - X turns out to be be particularly useful for determination of the CKM matrix element vertical bar V ub vertical bar. We present the branching ratio (BR) of B-bar 0 → π - X as a function of vertical bar V ub vertical bar, with an estimation of possible uncertainty. The BR is expected to be an order of 10 -4

APLIKASI METODE-METODE AGGLOMERATIVE DALAM ANALISIS KLASTER PADA DATA TINGKAT POLUSI UDARA

Directory of Open Access Journals (Sweden)

Dewi Rachmatin

2014-09-01

Full Text Available ABSTRAK   Analisis Klaster merupakan analisis pengelompokkan data yang mengelompokkan data berdasarkan informasi yang ditemukan pada data. Tujuan dari analisis klaster adalah agar objek-objek di dalam satu kelompok memiliki kesamaan satu sama lain sedangkan dengan objek-objek yang berbeda kelompok memiliki perbedaan. Analisis klaster dibagi menjadi dua metode yaitu metode hirarki dan metode non-hirarki. Metode hirarki dibagi menjadi dua, yaitu metode agglomerative (pemusatan dan metode divisive (penyebaran. Metode-metode yang termasuk dalam metode agglomerative adalah Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward’s Method, Centroid Method dan Median Method. Pada artikel ini dibahas metode-metode agglomerative tersebut yang diterapkan pada data tingkat polusi udara. Masing-masing metode tersebut memberikan jumlah klaster yang berbeda.   Kata Kunci : Analisis Klaster, Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward’s Method, Centroid Method dan Median Method.     ABSTRACT Cluster analysis is an analysis of the data classification based on information found in the data.The objective of cluster analysis is that the objects in the group have in common with each other, while the different objects have different groups. Cluster analysis is divided into two methods : the method of non-hierarchical and hierarchical methods.Hierarchical method is divided into two methods, namely agglomerative methods (concentration and divisive methods (deployment. The methods included in the agglomerative method is Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward 's Method, Method and Median Centroid Method. In this article discussed the agglomerative methods were applied to the data rate of air pollution. Each of these methods provides a different number of clusters.   Keywords: Cluster Analysis , Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward

Bank pull or bar push: What drives scroll-bar formation in meandering rivers?

NARCIS (Netherlands)

van de Lageweg, W. I.; van Dijk, W. M.; Baar, A. W.; Rutten, J.; Kleinhans, M. G.

2014-01-01

One of the most striking features of meandering rivers are quasi-regular ridges of the point bar, evidence of a pulsed lateral migration of meander bends. Scroll bars formed on the inner bend are preserved on the point-bar surface as a series of ridges as meanders migrate, and in the subsurface of

Algorithms bio-inspired for the pattern obtention of control bars in BWR reactors

International Nuclear Information System (INIS)

Ortiz, J.J.; Perusquia, R.; Montes, J.L.

2003-01-01

In this work methods based on Genetic Algorithms and Systems based on ant colonies for the obtention of the patterns of control bars of an equilibrium cycle of 18 months for the Laguna Verde nuclear power station are presented. A comparison of obtained results with the methods and with those of design of such equilibrium cycle is presented. As consequence of the study, it was found that the algorithm based on the ant colonies reached to diminish the coast down period (decrease of power at the end of the cycle) in five and half days with respect to the original design what represents an annual saving of $US 100,000. (Author)

Stress-strain relationship of high-strength steel (HSS) reinforcing bars

Science.gov (United States)

Anggraini, Retno; Tavio, Raka, I. Gede Putu; Agustiar

2018-05-01

The introduction of High-Strength Steel (HSS) reinforcing bars in reinforced concrete members has gained much attention in recent years and led to many advantages such as construction timesaving. It is also more economical since it can reduce the amount of reinforcing steel bars used in concrete members which in turn alleviates the congestion of reinforcement. Up to present, the building codes, e.g. American Concrete Institute (ACI) 318M-14 and Standard National Indonesia (SNI) 2847:2013, still restrict the use of higher-strength steel reinforcing bars for concrete design up to Grade 420 MPa due to the possible suspected brittle behavior of concrete members. This paper evaluates the characteristics of stress-strain relationships of HSS bars if they are comparable to the characteristics of those of Grade 420 MPa. To achieve the objective of the study, a series of steel bars from various grades (420, 550, 650, and 700 MPa) was selected. Tensile tests of these steel samples were conducted under displacement-controlled mode to capture the complete stress-strain curves and particularly the post-yield response of the steel bars. The results indicate that all the steel bars tested had the actual yield strengths greater than the corresponding specified values. The stress-strain curves of HSS reinforcing bars (Grade 550, 650, and 700 MPa) performed slightly different characteristics with those of Grade 420 MPa.

Determination of the quark coupling strength vertical bar V-ub vertical bar using baryonic decays

NARCIS (Netherlands)

Aaij, R.; Adeva, B.; Adinolfi, M.; Older, A. A.; Ajaltouni, Z.; Akar, S.; Albrecht, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; Cartelle, P. Alvarez; Alves, A. A.; Amato, S.; Amerio, S.; Amhis, Y.; An, L.; Anderlini, L.; Andreotti, M.; Andrews, J. E.; Appleby, R. B.; Gutierrez, O. Aquines; Archilli, F.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Bachmann, S.; Back, J. J.; Badalov, A.; Baesso, C.; Baldini, W.; Barlow, R. J.; Barschel, C.; Barsuk, S.; Barter, W.; Batozskaya, V.; Battista, V.; Beaucourt, L.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Bel, L. J.; Belyaev, I.; Ben-Haim, E.; Bencivenni, G.; Onderwater, C. J. G.; Pellegrino, A.; Tolk, S.

In the Standard Model of particle physics, the strength of the couplings of the b quark to the u and c quarks, vertical bar V-ub vertical bar and vertical bar V-ub vertical bar, are governed by the coupling of the quarks to the Higgs boson. Using data from the LHCb experiment at the Large Hadron

What makes the family of barred disc galaxies so rich: damping stellar bars in spinning haloes

Science.gov (United States)

Collier, Angela; Shlosman, Isaac; Heller, Clayton

2018-05-01

We model and analyse the secular evolution of stellar bars in spinning dark matter (DM) haloes with the cosmological spin λ ˜ 0-0.09. Using high-resolution stellar and DM numerical simulations, we focus on angular momentum exchange between stellar discs and DM haloes of various axisymmetric shapes - spherical, oblate, and prolate. We find that stellar bars experience a diverse evolution that is guided by the ability of parent haloes to absorb angular momentum, J, lost by the disc through the action of gravitational torques, resonant and non-resonant. We confirm that dynamical bar instability is accelerated via resonant J-transfer to the halo. Our main findings relate to the long-term secular evolution of disc-halo systems: with an increasing λ, bars experience less growth and basically dissolve after they pass through vertical buckling instability. Specifically, with increasing λ, (1) the vertical buckling instability in stellar bars colludes with inability of the inner halo to absorb J - this emerges as the main factor weakening or destroying bars in spinning haloes; (2) bars lose progressively less J, and their pattern speeds level off; (3) bars are smaller, and for λ ≳ 0.06 cease their growth completely following buckling; (4) bars in λ > 0.03 haloes have ratio of corotation-to-bar radii, RCR/Rb > 2, and represent so-called slow bars without offset dust lanes. We provide a quantitative analysis of J-transfer in disc-halo systems, and explain the reasons for absence of growth in fast spinning haloes and its observational corollaries. We conclude that stellar bar evolution is substantially more complex than anticipated, and bars are not as resilient as has been considered so far.

Risk analysis; Analisis de riesgos

Energy Technology Data Exchange (ETDEWEB)

Baron, J H; Nunez McLeod, J; Rivera, S S [Universidad Nacional de Cuyo, Mendoza (Argentina). Instituto de Capacitacion Especial y Desarrollo de Ingenieria Asistida por Computadora (CEDIAC)

1997-07-01

This book contains a selection of research works performed in the CEDIAC Institute (Cuyo National University) in the area of Risk Analysis, with specific orientations to the subjects of uncertainty and sensitivity studies, software reliability, severe accident modeling, etc. This volume presents important material for all those researches who want to have an insight in the risk analysis field, as a tool to solution several problems frequently found in the engineering and applied sciences field, as well as for the academic teachers who want to keep up to date, including the new developments and improvements continuously arising in this field. [Spanish] Este libro contiene una seleccion de trabajos de investigacion realizados dentro del Instituto de Capacitacion Especial y Desarrollo de la Ingenieria Asistida por Computadora en el area del analisis de riesgos, con una orientacion hacia el estudio de incertidumbres y sensibilidad, confiabilidad de software, modelacion de accidentes severos, etc. Este volumen recoge un material de indudable importancia e interes para todos aquellos investigadores y profesionales que desean incursionar en este campo del analisis de riesgos como herramienta para la solucion de problemas frecuentemente encontrados en la ingenieria y las ciencias aplicadas, asi como para los academicos que desean mantenerse al dia, conociendo los nuevos desarrollos y tecnicas que constantemente aparecen en su area.

ANALISIS PENGARUH KINERJA LINGKUNGAN TERHADAP KINERJA INDUSTRI KECIL

Directory of Open Access Journals (Sweden)

Sukirman -

2012-03-01

Full Text Available Tujuan penelitian adalah mengidentifikasi, menganalisis praktik pengelolaan lingkungan pada sentra industri kecil dibandingkan best practices dalam upaya meningkatkan kinerja lingkungan di Kabupaten Pati. Kajian difokuskan pada pengelolaan lingkungan secara efektif dengan melibatkan variabel inisiatif lingkungan, keterlibatan karyawan, dan integrasi dengan supplier. Populasinya adalah seluruh perusahaan Industri Kecil di Kabupaten Pati. Sampel berjumlah 97 perusahaan. Teknik sampling menggunakan kluster sampling, dengan sampel pada sentra industri kecil di Kabupaten Pati.  Analisis menggunakan analisis deskriptif dan analisis komparatif. Hasil penelitian menunjukkan praktik pengelolaan lingkungan pada sentra industri kecil di Kabupaten Pati belum dilaksanakan secara optimal. Sementara itu, variabel integrasi supplier berpengaruh langsung terhadap kinerja perusahaan.The purpose of this study is to identify and to analyze an environmental management practice which is compared to the best practices in order to improve environmental performance in the industrial centers in Pati District. This study focuses on managing the environment effectively by involving environmental initiative variables, employee involvement, and integration of suppliers. Population in this study was all small industrial enterprises in Pati regency which has 97 companies as data samples. Data were collected by using cluster sampling techniques, and samples were taken from small industrial centers in the District of Pati. Data were analyzed by using descriptive and comparative methods. Results of this study showed that environmental management practices in small industrial centers had not been implemented optimally. Meanwhile, supplier integration variables influenced directly toward corporate performance.

Implementation of viscoelastic Hopkinson bars

Directory of Open Access Journals (Sweden)

Govender R.

2012-08-01

Full Text Available Knowledge of the properties of soft, viscoelastic materials at high strain rates are important in furthering our understanding of their role during blast or impact events. Testing these low impedance materials using a metallic split Hopkinson pressure bar setup results in poor signal to noise ratios due to impedance mismatching. These difficulties are overcome by using polymeric Hopkinson bars. Conventional Hopkinson bar analysis cannot be used on the polymeric bars due to the viscoelastic nature of the bar material. Implementing polymeric Hopkinson bars requires characterization of the viscoelastic properties of the material used. In this paper, 30 mm diameter Polymethyl Methacrylate bars are used as Hopkinson pressure bars. This testing technique is applied to polymeric foam called Divinycell H80 and H200. Although there is a large body of of literature containing compressive data, this rarely deals with strain rates above 250s−1 which becomes increasingly important when looking at the design of composite structures where energy absorption during impact events is high on the list of priorities. Testing of polymeric foams at high strain rates allows for the development of better constitutive models.

Analisis Peranan Franchisor Terhadap Suksesnya Bisnis Franchise Pada Mc. Donald’s Cabang Ring Road Medan

OpenAIRE

Simarmata, Leonardo

2012-01-01

Tujuan penelitian ini adalah untuk mengetahui dan menganalisis peranan franchisor dalam promotion, support service, training, control system dan communication terhadap suksesnya bisnis franchise pada Mc Donald’s Cabang Ring Road Medan. Pengumpulan data primer diperoleh dengan cara memberikan daftar pertanyaan (questionaire) dan melakukan wawancara (interview) secara mendalam (depth interview) kepada pemilik usaha M. Donald’s Cabang Ring Road Medan. Teknik analisis data penelitian ini ad...

Analisis Korelasi Kanonik Hubungan Perilaku Pemimpin dan Motivasi Kerja Karyawan

Directory of Open Access Journals (Sweden)

I Gusti Ayu Made Srinadi

2014-06-01

Full Text Available Kualitas pemimpin merupakan penentu keberhasilan organisasi yang dipimpin. Hubungan antara pemimpin dengan karyawannya merupakan hubungan saling ketergantungan yang umumnya tidak seimbang. Dalam proses interaksi yang terjadi antara pemimpin dan karyawan, berlangsung proses saling memengaruhi. Penelitian ini bertujuan untuk mencari hubungan perilaku pemimpin terhadap motivasi kerja karyawan dengan menggunakan analisis korelasi kanonik. Pengujian dengan menggunakan analisis korelasi kanonik menunjukkan bahwa perilaku pemimpin dengan motivasi karyawan memiliki keeratan hubungan dengan nilai korelasi kanonik sebesar 0,9058533. Faktor perilaku pemimpin yang paling tinggi berkorelasi dengan motivasi kerja karyawan di McDonald’s Kuta Beach adalah faktor kemampuan mengarahkan dan menghadapi karyawan dengan nilai korelasi yaitu sebesar 0,7619707.

Analisis Korelasi Kanonik Hubungan Perilaku Pemimpin dan Motivasi Kerja Karyawan

Directory of Open Access Journals (Sweden)

I Gusti Ayu Made Srinadi

2015-04-01

Full Text Available Kualitas pemimpin merupakan penentu keberhasilan organisasi yang dipimpin. Hubungan antara pemimpin dengan karyawannya merupakan hubungan saling ketergantungan yang umumnya tidak seimbang. Dalam proses interaksi yang terjadi antara pemimpin dan karyawan, berlangsung proses saling memengaruhi. Penelitian ini bertujuan untuk mencari hubungan perilaku pemimpin terhadap motivasi kerja karyawan dengan menggunakan analisis korelasi kanonik. Pengujian dengan menggunakan analisis korelasi kanonik menunjukkan bahwa perilaku pemimpin dengan motivasi karyawan memiliki keeratan hubungan dengan nilai korelasi kanonik sebesar 0,9058533. Faktor perilaku pemimpin yang paling tinggi berkorelasi dengan motivasi kerja karyawan di McDonald’s Kuta Beach adalah faktor kemampuan mengarahkan dan menghadapi karyawan dengan nilai korelasi yaitu sebesar 0,7619707.

ANALISIS KELAYAKAN FINANSIAL PROYEK NARROWNECK PRESS AND BLOW UNTUK PROSES PRODUKSIBOTOL MINUMAN BERENERGI DI PT. ABC

Directory of Open Access Journals (Sweden)

Toni MT Munthe

2015-08-01

Full Text Available PT. ABC merupakan salah satu pabrik yang memproduksi botol kemasan kaca. Penelitian ini bertujuan untuk mengetahui layak atau tidaknya rencana investasi pada proyek Narrow Neck Press and Blow secara finansial di PT. ABC pada periode bulan April 2014 hingga bulan Juni 2014. Analisis kelayakan finansial proyek Narrow Neck Press and Blow, menggunakan metode analisis Net Present Value, Internal Rate of Return, Payback Period dan Sensitivity Analysis. Perbedaan antara nilai sekarang dari semua kas masuk dengan nilai sekarang dari semua kas keluar dari suatu proyek atau suatu investasi diperoleh dengan metode NPV, sedangkan untuk mencari tingkat bunga yang menyamakan nilai sekarang dari aliran kas bersih dan investasi diperoleh dengan metode IRR. Metode analisis yang dapat digunakan untuk mengetahui berapa lamakah waktu yang diperlukan untuk menutup dana yang dikeluarkan untuk suatu proyek dapat diperoleh dengan metode Payback Period. Setelah itu, dilakukan pengujian menggunakan sensitivitas analisis untuk mengetahui tingkat sensitivitas untuk tiap-tiap parameter terhadap persentase kenaikan dan penurunan. Dari hasil analisis data diperoleh nilai NPV sebesar Rp. 1.179.728.649.900,06, nilai IRR sebesar 56,36% dan periode pengembalian terletak pada 2 tahun 2 bulan 9 hari. Dengan menggunakan analisis sensitivitas dapat diketahui bahwa proyek ini sangat sensitif terhadap penurunan volume produksi. Berdasarkan hasil perhitungan, titik impas akan dicapai apabila volume produksi 213.403.267 unit per tahun atau 88,92% dari volume produksi awal. Nilai ini menunjukkan bahwa apabila volume produksi pada suatu periode mengalami penurunan lebih dari 11,08% dari volume produksi awal, maka investasi tersebut akan merugikan.

Analisis Industri Ritel Di Indonesia

OpenAIRE

Soliha, Euis

2008-01-01

This article presents an overview the analisys of retail industry in Indonesia.Retail industry in Indonesia grow rapidly. Industrial presence of modern retailbasically exploits public shopping pattern especially middle-weight and to which donot want to mill around in traditional market. Analysis Five Forces is used toanalysis retail industry. Analysis five force is bargaining power of buyers,bargaining power of suppliers, threat of new entrants, threat of new substituteproducts, and rivalry a...

Age and Sex Differences in Controlled Force Exertion Measured by a Computing Bar Chart Target-Pursuit System

Science.gov (United States)

Nagasawa, Yoshinori; Demura, Shinichi

2009-01-01

This study aimed to examine the age and sex differences in controlled force exertion measured by the bar chart display in 207 males (age 42.1 [plus or minus] 19.8 years) and 249 females (age 41.7 [plus or minus] 19.1 years) aged 15 to 86 years. The subjects matched their submaximal grip strength to changing demand values, which appeared as a…

Testing of a Spray-bar Thermodynamic Vent System in Liquid Nitrogen

Science.gov (United States)

Flachbart, R. H.; Hastings, L. J.; Hedayat, A.; Nelson, S. L.; Tucker, S. P.

2005-01-01

To support development of a microgravity pressure control capability for liquid oxygen, thermodynamic vent system (TVS) testing was conducted at Marshall Space Flight Center (MSFC) using liquid nitrogen (LN2) as a LOX simulant. The spray bar TVS hardware used was originally designed by the Boeing Company for testing in liquid hydrogen (LH2). With this concept, a small portion of the tank fluid is passed through a Joule-Thomson (J-T) device, and then through a longitudinal spray bar mixed-heat exchanger in order to cool the bulk fluid. To accommodate the larger mass flow rates associated with LN2, the TVS hardware was modified by replacing the recirculation pump with an LN2 compatible pump and replacing the J-T valve. The primary advantage of the spray-bar configuration is that tank pressure control can be achieved independent of liquid and vapor location, enhancing the applicability of ground test data to microgravity conditions. Performance testing revealed that the spray-bar TVS was effective in controlling tank pressure within a 6.89 kPa band for fill levels of 90%, 50%, and 25%. Tests were also conducted with gaseous helium (GHe) in the ullage. The TVS operated nominally with GHe in the ullage, with performance similar to the tests with gaseous nitrogen (GN2). Testing demonstrated that the spray-bar TVS design was flexible enough for use in two different propellants with minimal hardware modifications.

Analisis Value Chain Di Industri Otomotif

OpenAIRE

Hendri, Hendri

2017-01-01

Penelitian ini untuk menganalisis industri otomotif. Tujuan dari penelitian ini adalah untuk menganalisis dan mengetahui aktivitas dan kondisi internal proses industri manufaktur dengan menggunakan value chain guna masukan dimasa akan datang bagi industri otomotif secara khusus. Value Chain merupakan rantai nilai yang dapat mengetahui kekuatan Perusahaan, keuntungan dan kesuksesan dari rantai aktivitas dalam Perusahaan atau industri manufaktur.Metode analisis menggunakan Statistika Deskript...

The Analisis Sentimen Sosial Media Twitter Dengan Algoritma Machine Learning Menggunakan Software R

Directory of Open Access Journals (Sweden)

Jaka Aulia Pratama

2017-10-01

Full Text Available Media sosial adalah wadah untuk mengungkapkan opini terhadap suatu topik tertentu. Ketersediaan informasi dan opini dari para pengguna media sosial merupakan kumpulan dokumen data berupa teks yang amat sangat besar dan berguna untuk kepentingan penelitian maupun membuat suatu keputusan bagi pihak – pihak tertentu. Text Mining bisa didefinisikan sebagai proses penggalian informasi di mana pengguna berinteraksi dengan kumpulan dokumen dari waktu ke waktu dengan menggunakan suatu alat analisis. Analisis sentimen atau Opinion Mining adalah salah satu studi di bidang komputasi yang berhubungan dengan kasus publik mengenai opini, penilaian, sikap, dan emosi. Penelitian ini akan menggunakan metode Machine Learning pada analisis sentimen pengguna layanan jejaring sosial Twitter terhadap Donald Trump dan Barack Obama dalam 20000 tweets. Nilai akurasi metode Machine Learning yang diperoleh cukup tinggi yaitu 87.52% untuk Data Training dan 87.4% untuk Data Testing.

Bar codes for nuclear safeguards

International Nuclear Information System (INIS)

Keswani, A.N.; Bieber, A.M. Jr.

1983-01-01

Bar codes similar to those used in supermarkets can be used to reduce the effort and cost of collecting nuclear materials accountability data. A wide range of equipment is now commercially available for printing and reading bar-coded information. Several examples of each of the major types of commercially available equipment are given, and considerations are discussed both for planning systems using bar codes and for choosing suitable bar code equipment

Bar codes for nuclear safeguards

International Nuclear Information System (INIS)

Keswani, A.N.; Bieber, A.M.

1983-01-01

Bar codes similar to those used in supermarkets can be used to reduce the effort and cost of collecting nuclear materials accountability data. A wide range of equipment is now commercially available for printing and reading bar-coded information. Several examples of each of the major types of commercially-available equipment are given, and considerations are discussed both for planning systems using bar codes and for choosing suitable bar code equipment

Search for the decay of a B0 or B0bar meson to K*0bar K0 or K*0 K0bar

Energy Technology Data Exchange (ETDEWEB)

Aubert, B.

2006-06-27

The authors present a search for the decay of a B{sup 0} or {bar B}{sup 0} meson to a {bar K}*{sup 0} K{sup 0} or K*{sup 0} {bar K}{sup 0} final state, using a sample of approximately 232 million B{bar B} events collected with the BABAR detector at the PEP-II asymmetric energy e{sup +}e{sup -} collider at SLAC. The measured branching fraction is {Beta}(B{sup 0} {yields} {bar K}*{sup 0} K{sup 0}) + {Beta}(B{sup 0} {yields} K*{sup 0} {bar K}{sup 0}) = (0.2{sub -0.8, -0.3}{sup +0.9, +0.1}) x 10{sup -6}. They obtain the following upper limit for the branching fraction at 90% confidence level: {Beta}(B{sup 0} {yields} {bar K}*{sup 0} K{sup 0}) + {Beta}(B{sup 0} {yields} K*{sup 0} {bar K}{sup 0}) < 1.9 x 10{sup -6}. They use our result to constrain the Standard Model prediction for the deviation of the CP asymmetry in B{sup 0} {yields} {phi}K{sup 0} from sin 2{beta}.

Fusional Vergence Detected by Prism Bar and Synoptophore in Chinese Childhood Intermittent Exotropia

Directory of Open Access Journals (Sweden)

Tao Fu

2015-01-01

Full Text Available Purpose. To measure the changes in fusional vergence in Chinese children with intermittent exotropia (IXT and the association with the control of IXT. Methods. Ninety-two patients with IXT (8–15 years old were compared with 86 controls. Exodeviation control was evaluated using the Revised Newcastle Control Score. Angle of deviation was measured using prism and alternate cover testing at distance and near. Fusional vergence was measured using prism bar and synoptophore. This study was registered with ChiCTR-RCC-13003920. Results. Using prism bar, convergence break points were lower whereas divergence break points were higher in children with IXT at distance (P<0.001 and near (P<0.001 compared with controls. There was no significant difference in mean divergence amplitudes between the two groups when testing using a synoptophore (P=0.53. In children with IXT, the distance between recovery point and break point in both convergence (distance: P=0.02; near: P=0.02 and divergence (distance: P<0.001; near: P<0.001 was larger than controls when detected by prism bar and synoptophore (convergence: P=0.005; divergence: P=0.006. Conclusions. Children with IXT have reduced convergence amplitudes as detected by both prism bar and synoptophore.

High-resolution smile measurement and control of wavelength-locked QCW and CW laser diode bars

Science.gov (United States)

Rosenkrantz, Etai; Yanson, Dan; Klumel, Genady; Blonder, Moshe; Rappaport, Noam; Peleg, Ophir

2018-02-01

High-power linewidth-narrowed applications of laser diode arrays demand high beam quality in the fast, or vertical, axis. This requires very high fast-axis collimation (FAC) quality with sub-mrad angular errors, especially where laser diode bars are wavelength-locked by a volume Bragg grating (VBG) to achieve high pumping efficiency in solid-state and fiber lasers. The micron-scale height deviation of emitters in a bar against the FAC lens causes the so-called smile effect with variable beam pointing errors and wavelength locking degradation. We report a bar smile imaging setup allowing FAC-free smile measurement in both QCW and CW modes. By Gaussian beam simulation, we establish optimum smile imaging conditions to obtain high resolution and accuracy with well-resolved emitter images. We then investigate the changes in the smile shape and magnitude under thermal stresses such as variable duty cycles in QCW mode and, ultimately, CW operation. Our smile measurement setup provides useful insights into the smile behavior and correlation between the bar collimation in QCW mode and operating conditions under CW pumping. With relaxed alignment tolerances afforded by our measurement setup, we can screen bars for smile compliance and potential VBG lockability prior to assembly, with benefits in both lower manufacturing costs and higher yield.

Behavior of reinforced concrete beams reinforced with GFRP bars

Directory of Open Access Journals (Sweden)

D. H. Tavares

Full Text Available The use of fiber reinforced polymer (FRP bars is one of the alternatives presented in recent studies to prevent the drawbacks related to the steel reinforcement in specific reinforced concrete members. In this work, six reinforced concrete beams were submitted to four point bending tests. One beam was reinforced with CA-50 steel bars and five with glass fiber reinforced polymer (GFRP bars. The tests were carried out in the Department of Structural Engineering in São Carlos Engineering School, São Paulo University. The objective of the test program was to compare strength, reinforcement deformation, displacement, and some anchorage aspects between the GFRP-reinforced concrete beams and the steel-reinforced concrete beam. The results show that, even though four GFRP-reinforced concrete beams were designed with the same internal tension force as that with steel reinforcement, their capacity was lower than that of the steel-reinforced beam. The results also show that similar flexural capacity can be achieved for the steel- and for the GFRP-reinforced concrete beams by controlling the stiffness (reinforcement modulus of elasticity multiplied by the bar cross-sectional area - EA and the tension force of the GFRP bars.

Membrane Localization is Critical for Activation of the PICK1 BAR Domain

OpenAIRE

Madsen, Kenneth L.; Eriksen, Jacob; Milan-Lobo, Laura; Han, Daniel S.; Niv, Masha Y.; Ammendrup-Johnsen, Ina; Henriksen, Ulla; Bhatia, Vikram K.; Stamou, Dimitrios; Sitte, Harald H.; McMahon, Harvey T.; Weinstein, Harel; Gether, Ulrik

2008-01-01

The PSD-95/Discs-large/ZO-1 homology (PDZ) domain protein, protein interacting with C kinase 1 (PICK1) contains a C-terminal Bin/amphiphysin/Rvs (BAR) domain mediating recognition of curved membranes; however, the molecular mechanisms controlling the activity of this domain are poorly understood. In agreement with negative regulation of the BAR domain by the N-terminal PDZ domain, PICK1 distributed evenly in the cytoplasm, whereas truncation of the PDZ domain caused BAR domain-dependent redis...

Hyperon polarisation in the reaction p-bar sup 1 sup 2 C -> LAMBDA-bar LAMBDA X

CERN Document Server

Pomp, S; Bröders, R; Bunker, B; Dennert, H; Eisenstein, R E; Eyrich, W; Fischer, H; Franklin, G; Franz, J; Geyer, R; Harris, P; Hauffe, J; Hertzog, D; Johansson, T; Jones, T; Kilian, K; Kraft, R A; Meyer, C; Oelert, W; Quinn, B; Röhrich, K; Rössle, E; Sachs, K; Schmitt, H; Schumacher, R; Sefzick, T; Stinzing, F; Tayloe, R; Todenhagen, R; Traneus, E; Wirth, S

2000-01-01

Data from the p-bar sup 1 sup 2 C -> LAMBDA-bar LAMBDA X reaction, collected by the PS185 experiment at antiproton momenta around 1.44 GeV/c, 1.66 GeV/c and 1.77 GeV/c, have been analyzed and the LAMBDA and LAMBDA-bar polarisations have been extracted. The events are classified as quasi-free or non-quasi-free and it is found that the polarisations for LAMBDA and LAMBDA-bar differ in the latter case. Such an effect comes from differences in the interaction of the outgoing LAMBDA and LAMBDA-bar with the residual nucleus and the measurement constitutes the first information on LAMBDA-bar interaction with nuclear matter.

Numerical simulations of wave propagation in long bars with application to Kolsky bar testing

Energy Technology Data Exchange (ETDEWEB)

Corona, Edmundo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-11-01

Material testing using the Kolsky bar, or split Hopkinson bar, technique has proven instrumental to conduct measurements of material behavior at strain rates in the order of 10³ s^-1. Test design and data reduction, however, remain empirical endeavors based on the experimentalist's experience. Issues such as wave propagation across discontinuities, the effect of the deformation of the bar surfaces in contact with the specimen, the effect of geometric features in tensile specimens (dog-bone shape), wave dispersion in the bars and other particulars are generally treated using simplified models. The work presented here was conducted in Q3 and Q4 of FY14. The objective was to demonstrate the feasibility of numerical simulations of Kolsky bar tests, which was done successfully.

CP violation in hyperon decays: the case p-bar p → Λ-bar Λ → p-bar π+ pπ-

International Nuclear Information System (INIS)

Hamann, N.; He, X.G.; Landua, R.; Ohlsson, S.; Steger, H.; Valencia, G.; Fischer, H.; Geyer, R.; Hertzog, D.; Kolo, B.; Miller, J.P.; Rohrich, K.

1992-01-01

An account is given of the experimental status of CP violation and of the phenomenology of hyperon non-leptonic decays. Updated information on the estimate of CP-violating observable in these decays is presented. An experimental programme is outlined, which aims to pursue the search for direct CP violation in hyperon-antihyperon decays by means of the reaction p-bar p → Λ-bar Λ → p-bar π + pπ - . The experiment as well as analysis methods are described. Alternative approaches employing hyperons are also discussed. 54 refs., 1 tab., 13 figs

QCD corrections to leptonic and hadronic observables from p bar p→W+X→ bar τντX

International Nuclear Information System (INIS)

Baer, H.; Reno, M.H.

1993-01-01

We set up a formalism for calculating the O(α s ) corrections to the process p bar p→W + X→ bar τν τ X with spin-correlated τ decays to leptons and mesons. Our results are applicable to Monte Carlo integration, which allows easy construction of any desired observable at next-to-leading-log level, and the possibility to include experimental cuts. Our results are applied explicitly to the decay modes τ→ bar ν τ bar eν e , bar τ→ bar ν τ π + , and bar τ→ bar ν τ π + π 0 ; other decay modes may be included in a straightforward fashion. We show results for transverse momentum and rapidity variables in leading-log and next-to-leading-log approximations; the leptonic observables are compared to similar observables from direct W→ bar eν e

NUTRIMAT BAR MENURUNKAN SISA MAKANAN PASIEN KEMOTERAPI DI RSUP SANGLAH DENPASAR, BALI, INDONESIA

Directory of Open Access Journals (Sweden)

Ida Ayu Nyoman Triwini

2017-12-01

 Nutrimat Bar Decreases Leftover Food among Chemotherapy Patients In The General Hospital of Sanglah Denpasar, Bali, Indonesia Chemotherapy is one of cancer medication alternatives by using cytotoxic medicines to eliminate cancer cells or to stop the development of cancer cells. The Side effects of chemotherapy medication are nausea and vomit which influence the absorption of nutrients in cancer patients. Nutrimat bar is a food specially designed for chemotherapy patients in small size but contained high energy, protein and antioxidant. This study aimed to analyze of giving nutrimat bar to decrease leftover food of chemotherapy patients in the general hospital of Sanglah Denpasar, Bali in Indonesia. Quasi experimental study using non-randomized pre and post-test with control group design was done on 33 patients using purposive sampling technique. The treatment was done by giving nutrimat bar to the case group and hospital standard food to the control group. Measurement of leftover food was measured by using visual comstock method. Data analysis was applied using saphiro wilk test and independent t-test parametric test. The results showed that the average of leftover food of chemotherapy patients in case group is 28.94% (±8.50, while in the control group is 46.00% (±4.70. The result of t-test analysis indicated that there was a significant difference  between food waste in case group and control group as much as p<0.05. It was concluded that nutrimat bar was effective to decrease waste food  among chemotherapy patients in general hospital of Sanglah Denpasar.  Keywords: chemotherapy, waste food, nutrimat bar, Sanglah Hospital

Bar quenching in gas-rich galaxies

Science.gov (United States)

Khoperskov, S.; Haywood, M.; Di Matteo, P.; Lehnert, M. D.; Combes, F.

2018-01-01

Galaxy surveys have suggested that rapid and sustained decrease in the star-formation rate (SFR), "quenching", in massive disk galaxies is frequently related to the presence of a bar. Optical and near-IR observations reveal that nearly 60% of disk galaxies in the local universe are barred, thus it is important to understand the relationship between bars and star formation in disk galaxies. Recent observational results imply that the Milky Way quenched about 9-10 Gyr ago, at the transition between the cessation of the growth of the kinematically hot, old, metal-poor thick disk and the kinematically colder, younger, and more metal-rich thin disk. Although perhaps coincidental, the quenching episode could also be related to the formation of the bar. Indeed the transfer of energy from the large-scale shear induced by the bar to increasing turbulent energy could stabilize the gaseous disk against wide-spread star formation and quench the galaxy. To explore the relation between bar formation and star formation in gas rich galaxies quantitatively, we simulated gas-rich disk isolated galaxies. Our simulations include prescriptions for star formation, stellar feedback, and for regulating the multi-phase interstellar medium. We find that the action of stellar bar efficiently quenches star formation, reducing the star-formation rate by a factor of ten in less than 1 Gyr. Analytical and self-consistent galaxy simulations with bars suggest that the action of the stellar bar increases the gas random motions within the co-rotation radius of the bar. Indeed, we detect an increase in the gas velocity dispersion up to 20-35 km s-1 at the end of the bar formation phase. The star-formation efficiency decreases rapidly, and in all of our models, the bar quenches the star formation in the galaxy. The star-formation efficiency is much lower in simulated barred compared to unbarred galaxies and more rapid bar formation implies more rapid quenching.

Re-study of the contribution of scalar potential and spectra of cc-bar, bb-bar and bc-bar(b-bar c) families

International Nuclear Information System (INIS)

Yuan Xuhao; Ke Hongwei; Ding Yibing; Li Xueqian

2012-01-01

We indicated in our previous work that for QED the role of the scalar potential which appears at the loop level is much smaller than that of the vector potential and is in fact negligible. But the situation is different for QCD, one reason is that the loop effects are more significant because α s is much larger than α, and second the non-perturbative QCD effects may induce a sizable scalar potential. In this work, we study phenomenologically the contribution of the scalar potential to the spectra of charmonia, bottomonia and bc-bar (b-bar c) families. Taking into account both vector and scalar potentials, by fitting the well measured charmonia and bottomonia spectra, we re-fix the relevant parameters and test them by calculating other states of not only the charmonia and bottomonia families, but also the bc-bar family. We also consider the Lamb shift of the spectra. (authors)

Star formation suppression and bar ages in nearby barred galaxies

Science.gov (United States)

James, P. A.; Percival, S. M.

2018-03-01

We present new spectroscopic data for 21 barred spiral galaxies, which we use to explore the effect of bars on disc star formation, and to place constraints on the characteristic lifetimes of bar episodes. The analysis centres on regions of heavily suppressed star formation activity, which we term `star formation deserts'. Long-slit optical spectroscopy is used to determine H β absorption strengths in these desert regions, and comparisons with theoretical stellar population models are used to determine the time since the last significant star formation activity, and hence the ages of the bars. We find typical ages of ˜1 Gyr, but with a broad range, much larger than would be expected from measurement errors alone, extending from ˜0.25 to >4 Gyr. Low-level residual star formation, or mixing of stars from outside the `desert' regions, could result in a doubling of these age estimates. The relatively young ages of the underlying populations coupled with the strong limits on the current star formation rule out a gradual exponential decline in activity, and hence support our assumption of an abrupt truncation event.

Barred Owl [ds8

Data.gov (United States)

California Natural Resource Agency — These data define the current range of Barred and hybrid Barred/Spotted Owls in California. The current range includes the coastal mountains of northern California...

Analisis Kebijakan dan Efektivitas Organisasi

Directory of Open Access Journals (Sweden)

Amir Syarifudin Kiwang

2015-05-01

Full Text Available Penerapan Peraturan Gubernur Nusa Tenggara Timur Nomor 8 Tahun 2011 tentang Organisasi dan Tata Kerja Unit Pelaksana Teknis Pendidikan dan Pelatihan Koperasi dan Usaha Mikro Kecil dan Menengah pada Dinas Koperasi dan Usaha Mikro Kecil dan Menengah Provinsi Nusa Tenggara Timur adalah dalam rangka untuk meningkatkan efektivitas kerja organisasi pada UPT Diklat Koperasi dan UMKM. Penelitian ini berusaha untuk melihat dampak kebijakan organisasi terhadap efektivitas organisasi dengan menggunakan enam elemen variabel dari kebijakan dan praktik manajemen. Keenam elemen tersebut adalah penetapan tujuan strategis, pencarian dan pemanfaatan sumber daya, lingkungan prestasi, proses komunikasi, kepemimpinan dan pengambilan keputusan, serta adaptasi dan inovasi organisasi. Penelitian kualitatif ini menggunakan pendekatan studi kasus. Teknik analisis data yang digunakan adalah analisis data model Miles dan Huberman, yang terdiri atas reduksi data, display/penyajian data, dan kesimpulan/verifikasi. Hasil penelitian menunjukkan bahwa efektivitas organisasi pada UPT Diklat koperasi dan UMKM belum berjalan secara baik, hal ini dapat dilihat dari beberapa hal antara lain, belum adanya tenaga spesialisasi pengelola diklat dan tenaga khusus (sarjana di bidang perkoperasian dan kondisi lingkungan kerja (lingkungan prestasi pada UPT Diklat koperasi dan UMKM yang belum efektif. Penempatan pegawai juga belum tepat, mutasi ke UPT Diklat Koperasi dan UMKM tidak memperhatikan latar belakang pendidikan dan spesialisasi/keahlian pegawai sehingga membutuhkan waktu dalam proses penyesuaian serta menurunkan jumlah pelaksanaan diklat dikarenakan keterbatasan alokasi dana.

ANALISIS PERIKANAN HUHATE DI PERAIRAN LARANTUKA, FLORES

Directory of Open Access Journals (Sweden)

Mohamad Adha Akbar

2016-11-01

Full Text Available Informasi mengenai beberapa aspek perikanan huhate sangat diperlukan sebagai bahan untuk perencanaan pengelolaan perikanan yang berkelanjutan. Penelitian ini dilakukan di Larantuka, Flores Timur pada tahun 2014 dengan tujuan untuk menganalisis perikanan huhate sebagai salah satu tulang punggung perikanan TCT. Kegiatan penelitian diprioritaskan pada analisis unit alat tangkap, daerah penangkapan, komposisi hasil tangkapan dan estimasi Total Faktor Produktivitas (TFP perikanan huhate. Basis data pengukuran adalah himpunan  data pendaratan dan observasi lapang. Hasil penelitian menunjukan bahwa karakteristik armada terdiri dari kapal yang terbuat dari fibreglass dengan kisaran bobot kapal 6 - 30 GT. Daerah penangkapan di sekitar perairan Laut Sawu dan Laut Flores. Hasil tangkapan utama didominansi oleh cakalang (Katsuwonus pelamis sebanyak 82%, juwana tuna (Thunnus spp. 17% dan tongkol (Auxis spp. 1% serta hasil tangkapan ikutan lemadang (Coryphaena hippurus dan marlin (Makaira spp. < 1%. Hasil analisis tangkapan per unit upaya (CPUE memberikan nilai rata-rata sebesar 1,1 ton/trip (0,4-1,7 ton/trip dengan nilai tertinggi terjadi pada Februari, sedangkan terendah terjadi pada Januari. Hasil penelitian menunjukkan terdapat hubungan yang signifikan antara tren bulanan CPUE dan nilai TFP.

ANALISIS PENGELOLAAN LINGKUNGAN PERMUKIMAN DI KABUPATEN SOPPENG

Directory of Open Access Journals (Sweden)

Bakhrani Rauf

2016-08-01

Full Text Available Penelitian ini  bertujuan untuk mendeskripsikan pengelolaan lingkungan permukiman di Kabupaten Soppeng pada aspek: (1 penyediaan dan penanganan lahan terbuka hijau (open space; (2 penyediaan dan penanganan drainase; (3  penanganan sampah; (4 penyediaan dan penanganan pembuangan veses (septic tank. Jenis penelitian ini adalah penelitian kuantitatif dengan pendekatan survei.  Sampel wailayah penelitian ini adalah satu RW di ibu kota kabupaten dan satu RW di desa yang dipilih dengan metode purpossive sampling,  yaitu RW yang sudah maju di ibu kota kabupaten dan RW yang tertinggal di desa. Responden sebanyak 50 kepala keluarga yakni masing-masing 25 kepala keuarga di setiap RW, dipilih dengan  systematic random sampling.  Teknik pengumpulan data yang dilakukan adalah melakukan observasi langsung dan dilengkapi dengan wawancara terhadap responden. Analisis yang digunakan adalah analisis deskriptif. Hasil penelitian menunjukkan bahwa pengelolaan lingkungan permukiman di Kabupaten Soppeng pada aspek: (1 ketersediaan dan penanganan lahan terbuka hijau (open space ditemukan belum memadai; (2 ketersediaan drainase (air kotor dan air hujan ditemukan belum memadai; (3 Penanganan sampahbelum memadai; dan (4 penanganan veses dan penyediaan septic tankbelum memadai.

Galaxy Zoo: Observing secular evolution through bars

International Nuclear Information System (INIS)

Cheung, Edmond; Faber, S. M.; Koo, David C.; Athanassoula, E.; Bosma, A.; Masters, Karen L.; Nichol, Robert C.; Melvin, Thomas; Bell, Eric F.; Lintott, Chris; Schawinski, Kevin; Skibba, Ramin A.; Willett, Kyle W.

2013-01-01

In this paper, we use the Galaxy Zoo 2 data set to study the behavior of bars in disk galaxies as a function of specific star formation rate (SSFR) and bulge prominence. Our sample consists of 13,295 disk galaxies, with an overall (strong) bar fraction of 23.6% ± 0.4%, of which 1154 barred galaxies also have bar length (BL) measurements. These samples are the largest ever used to study the role of bars in galaxy evolution. We find that the likelihood of a galaxy hosting a bar is anticorrelated with SSFR, regardless of stellar mass or bulge prominence. We find that the trends of bar likelihood and BL with bulge prominence are bimodal with SSFR. We interpret these observations using state-of-the-art simulations of bar evolution that include live halos and the effects of gas and star formation. We suggest our observed trends of bar likelihood with SSFR are driven by the gas fraction of the disks, a factor demonstrated to significantly retard both bar formation and evolution in models. We interpret the bimodal relationship between bulge prominence and bar properties as being due to the complicated effects of classical bulges and central mass concentrations on bar evolution and also to the growth of disky pseudobulges by bar evolution. These results represent empirical evidence for secular evolution driven by bars in disk galaxies. This work suggests that bars are not stagnant structures within disk galaxies but are a critical evolutionary driver of their host galaxies in the local universe (z < 1).

Field observations of nearshore bar formation

DEFF Research Database (Denmark)

Aagaard, Troels; Kroon, Aart; Greenwood, Brian

2008-01-01

  The formation of an inner nearshore bar was observed during a high-energy event at the sandy beach of Vejers, Denmark. The bar accreted in situ during surf zone conditions and the growth of the bar was associated with the development of a trough landward of the bar. Measurements of hydrodynamics...

Historical-statistical analysis of energy consumption in energy management; Analisis historico-estadistico del consumo energetico en la administracion de energia

Energy Technology Data Exchange (ETDEWEB)

Guizar Bejarano, Ruben [IMENOR (Mexico); Oven, Mark [RCG/Hagler, Bailly, Inc., Washington (United States)

1993-12-31

Traditionally the specific consumption of energy has been considered as the most adequate index to evaluate the efficiencies in the productive processes. Nevertheless, this index, in some instances is highly susceptible to suffer significant variations, due to factors such as equipment condition, raw materials quality, operational parameters, climate and production level. This last one definitely is the most important and requires a deeper analysis. In this presentation a methodology is developed to analyze the energy consumption as well as their specific energy consumption with respect to production. Enough historical data are utilized to allow for a statistical analysis. This study is of equal usefulness in an energy diagnosis, as in a management program of energy saving. In presenting the possibility of identifying potential energy saving, stands out the advantages of the analysis and the conclusions that can be derived from it. Through the actual data collected in several industries during the energy diagnosis, various possible results of the analysis are presented. Finally, how this type of analysis can be adapted to a more precise control of the energy consumption is described and be used as a base for establishing goals in energy efficiency in the long term. [Espanol] Tradicionalmente se ha considerado al consumo especifico de energia como el indice energetico mas adecuado para evaluar las eficiencias de los procesos productivos. Sin embargo, este indice es en ocasiones altamente susceptible a sufrir variaciones importantes, debido a factores como el estado de los equipos, la calidad de la materia prima, los parametros operativos, el clima, y el nivel de produccion. Este ultimo es decididamente el mas importante, y requiere un analisis mas profundo. En esta presentacion se desarrolla una metodologia para analizar tanto consumos de energia como consumos especificos de energia con respecto a la produccion. Se utilizan suficientes datos historicos para permitir

Historical-statistical analysis of energy consumption in energy management; Analisis historico-estadistico del consumo energetico en la administracion de energia

Energy Technology Data Exchange (ETDEWEB)

Guizar Bejarano, Ruben [IMENOR (Mexico); Oven, Mark [RCG/Hagler, Bailly, Inc., Washington (United States)

1992-12-31

Traditionally the specific consumption of energy has been considered as the most adequate index to evaluate the efficiencies in the productive processes. Nevertheless, this index, in some instances is highly susceptible to suffer significant variations, due to factors such as equipment condition, raw materials quality, operational parameters, climate and production level. This last one definitely is the most important and requires a deeper analysis. In this presentation a methodology is developed to analyze the energy consumption as well as their specific energy consumption with respect to production. Enough historical data are utilized to allow for a statistical analysis. This study is of equal usefulness in an energy diagnosis, as in a management program of energy saving. In presenting the possibility of identifying potential energy saving, stands out the advantages of the analysis and the conclusions that can be derived from it. Through the actual data collected in several industries during the energy diagnosis, various possible results of the analysis are presented. Finally, how this type of analysis can be adapted to a more precise control of the energy consumption is described and be used as a base for establishing goals in energy efficiency in the long term. [Espanol] Tradicionalmente se ha considerado al consumo especifico de energia como el indice energetico mas adecuado para evaluar las eficiencias de los procesos productivos. Sin embargo, este indice es en ocasiones altamente susceptible a sufrir variaciones importantes, debido a factores como el estado de los equipos, la calidad de la materia prima, los parametros operativos, el clima, y el nivel de produccion. Este ultimo es decididamente el mas importante, y requiere un analisis mas profundo. En esta presentacion se desarrolla una metodologia para analizar tanto consumos de energia como consumos especificos de energia con respecto a la produccion. Se utilizan suficientes datos historicos para permitir

Bar and Theta Hyperoperations

Directory of Open Access Journals (Sweden)

Thomas Vougiouklis

2011-12-01

Full Text Available In questionnaires the replacement of the scale of Likert by a bar was suggested in 2008 by Vougiouklis & Vougiouklis. The use of the bar was rapidly accepted in social sciences. The bar is closely related with fuzzy theory and has several advantages during both the filling-in questionnaires and mainly in the research processing. In this paper we relate hyperstructure theory with questionnaires and we study the obtained hyperstructures which are used as an organising device of the problem.

Analisis Perbandingan Material Slab Beton Pada Perkerasan Apron Dengan Menggunakan Program Bantu Elemen Hingga

Directory of Open Access Journals (Sweden)

Hendrawan Setyo Warsito

2016-04-01

Full Text Available Kekuatan slab beton sangat dipengaruhi oleh jenis material yang dipakai. Jenis material yang dimaksud adalah material beton dengan menggunakan PC (Portland Cement dan penggunaan geopolimer dalam komposisi campuran slab beton. Beton geopolimer merupakan beton yang ramah lingkungan. Permasalahan lain yang timbul adalah letak roda pesawat tidak selalu berada pada titik yang sama disuatu permukaan slab beton apron. Pada tugas akhir ini dimaksudkan untuk menganalisis suatu slab beton yang dibebani roda pesawat dengan campuran variasi material beton dan variasi letak roda pesawat pada slab beton dengan program bantu metode elemen hingga. Dengan data pergerakan pesawat, spesifikasi apron bandara Juanda kondisi eksisting. Dilakukan perhitungan tebal slab beton menggunakan software FAARFIELD dan diperoleh tebal slab beton sebesar 442,5 mm. Dari analisis program bantu elemen hingga dapat diperoleh tegangan pada slab beton yang ditimbulkan oleh pembebanan roda pesawat. Hasil validasi dari analisis tegangan menggunakan program bantu elemen hingga dengan analisis Westergaard yaitu memiliki nilai tegangan yang hampir sama pada ketebalan slab beton 450mm. Nilai tegangan tiap-tiap material beton menunjukan nilai tebal slab beton yang diijinkan untuk tipe pesawat tertentu. Dari analisis menggunakan program bantu elemen hingga tebal slab beton yang diijinkan untuk material slab beton PC yaitu sebesar 425mm. Sedangkan untuk material beton geopolimer yaitu sebesar  415 mm.

Change of mechanisms of control bars, an activity of high performance in the twelve recharge of the Unit 1; Cambio de mecanismos de barras de control, una actividad de alto desempeno en la doceava recarga de la Unidad 1

Energy Technology Data Exchange (ETDEWEB)

Serrano R, H. [Gerencia de Centrales Nucleares, Km. 62.5, Car. 180 Cardel-Nautla, Alto Lucero, Veracruz (Mexico)]. e-mail: hsr98581@cfe.gob.mx

2007-07-01

One of the activities that are carried out during the fuel loading stage in the reactors of the Laguna Verde Power station (CNLV), it is the change of the control bar mechanisms (CRDs); the importance of giving maintenance to these mechanisms of control bars is that they should be reliable during the reactor operation. The insert of the control bars at one time of less than 7 seconds, it is the time required to carry out a sure reactor shutdown either of automatic way or manual by the operator action this insert of the control bars is through the CRDs that work them completely to insert negative reactivity to the reactor core. In this insert of the bars the neutrons are absorbed that maintain the reaction of self-sustained fission. The neutron absorber material in the control bars is a mixture of boron-gadolinium. It is also through the extraction of control bars like the fission reaction is controlled by means of the neutron density in the core. Extracting the control bars in form controlled by the operator is known as positive reactivity. This activity, that of the change of CRDs can only be carried out in the reload stage, that is to say, when the reactor is out one. The complexity of carrying out the change of those CRDs by its complexity as for radiological support that it demands, has taken to that the involved personnel acquires an experience and ability that it has allowed it to have a high performance. The importance of having this experience and ability, in the following generations, is fundamental for the CNLV, since that it requires to account with personal properly prepared, taking into account that the Safety is our maximum priority. The use of ALARA tools like devices with extension to maintain the distance of the source are key to optimize the personnel's dose; it is also key the support tools of the last technologies like the tele dosimetry, the television closed circuit (CCTV), the bubble suits for the extraction of the CRDs by the inferior

Measurement of the $\\bar{p}p \\rightarrow \\bar{n}n$ Charge-Exchange Differential Cross-Section

CERN Multimedia

2002-01-01

The aim of this proposal is a measurement of the differential cross-section of the $\\bar{p}$p $\\rightarrow$ $\\bar{n}$n charge-exchange reaction with a point-to-point precision of 1\\% in the forward direction, and an absolute normalization error of 3\\%. The high precision of the data should allow, inter alia, a determination of the $\\pi$NN coupling constant to better than 2\\%.\\\\ \\\\ The measurement will be done using the existing neutron and antineutron detectors built for experiment PS199 and liquid hydrogen target. In one week of running time, with a $\\bar{p}$ beam intensity of 3 $ 10 ^{5} $ $\\bar{p}$/sec, the reaction will be measured at a few $\\bar{p}$ momenta, in the range 500 to 900~MeV/c.

Analisis Model Penelusuran Backward Chaining dalam Mendeteksi Tingkat Kecanduan Game pada Anak

Directory of Open Access Journals (Sweden)

Anastasya Latubessy

2017-10-01

Full Text Available Game addiction rate can be detected by applying expert system. This study developed a model of game addiction analysis using backward chaining. This model uses six types of game addiction behavior, among others, salience, euphoria, conflict, tolerance, withdrawal, relapse and reinstatement. Someone is said to be addicted to the game if it meets at least three types of game addiction behavior. Testing the validity of the model is done by testing the closeness of the agreement between the model analysis and expert analysis, resulting in a value of 0.78 which means having a strong agreement. Tingkat kecanduan game dapat dideteksi dengan mengaplikasikan sistem pakar. Penelitian ini mengembangkan model analisis tingkat kecanduan game menggunakan backward chaining. Model ini menggunakan enam jenis perilaku kecanduan game antara lain, salience, euphoria, conflict, tolerance, withdrawal, relapse dan reinstatement. Seseorang dikatakan kecanduan game jika memenuhi paling sedikit tiga jenis perilaku kecanduan game. Pengujian validitas model dilakukan dengan menguji keeratan kesepakatan antara analisis model dan analisis pakar, menghasilkan nilai 0,78 yang berarti memiliki keeratan kesepakatan kuat.

Nuss bar migrations: occurrence and classification

International Nuclear Information System (INIS)

Binkovitz, Lauren E.; Binkovitz, Larry A.; Zendejas, Benjamin; Moir, Christopher R.

2016-01-01

Pectus excavatum results from dorsal deviation of the sternum causing narrowing of the anterior-posterior diameter of the chest. It can result in significant cosmetic deformities and cardiopulmonary compromise if severe. The Nuss procedure is a minimally invasive technique that involves placing a thin horizontally oriented metal bar below the dorsal sternal apex for correction of the pectus deformity. To identify the frequency and types of Nuss bar migrations, to present a new categorization of bar migrations, and to present examples of true migrations and pseudomigrations. We retrospectively reviewed the electronic medical records and all pertinent radiologic studies of 311 pediatric patients who underwent a Nuss procedure. We evaluated the frequency and type of bar migrations. Bar migration was demonstrated in 23 of 311 patients (7%) and occurred within a mean period of 26 days after surgery. Bar migrations were subjectively defined as deviation of the bar from the position demonstrated on the immediate postoperative radiographs and categorized as superior, inferior, rotation, lateral or flipped using a new classification system. Sixteen of the 23 migrations required re-operation. Nuss bar migration can be diagnosed with careful evaluation of serial radiographs. Nuss bar migration has a wide variety of appearances and requires exclusion of pseudomigration resulting from changes in patient positioning between radiologic examinations. (orig.)

Nuss bar migrations: occurrence and classification

Energy Technology Data Exchange (ETDEWEB)

Binkovitz, Lauren E.; Binkovitz, Larry A. [Mayo Clinic, Department of Radiology, Rochester, MN (United States); Zendejas, Benjamin; Moir, Christopher R. [Mayo Clinic, Department of Surgery, Rochester, MN (United States)

2016-12-15

Pectus excavatum results from dorsal deviation of the sternum causing narrowing of the anterior-posterior diameter of the chest. It can result in significant cosmetic deformities and cardiopulmonary compromise if severe. The Nuss procedure is a minimally invasive technique that involves placing a thin horizontally oriented metal bar below the dorsal sternal apex for correction of the pectus deformity. To identify the frequency and types of Nuss bar migrations, to present a new categorization of bar migrations, and to present examples of true migrations and pseudomigrations. We retrospectively reviewed the electronic medical records and all pertinent radiologic studies of 311 pediatric patients who underwent a Nuss procedure. We evaluated the frequency and type of bar migrations. Bar migration was demonstrated in 23 of 311 patients (7%) and occurred within a mean period of 26 days after surgery. Bar migrations were subjectively defined as deviation of the bar from the position demonstrated on the immediate postoperative radiographs and categorized as superior, inferior, rotation, lateral or flipped using a new classification system. Sixteen of the 23 migrations required re-operation. Nuss bar migration can be diagnosed with careful evaluation of serial radiographs. Nuss bar migration has a wide variety of appearances and requires exclusion of pseudomigration resulting from changes in patient positioning between radiologic examinations. (orig.)

Estetika Tari Minang dalam Kesenian Randai Analisis Tekstual-Kontekstual

Directory of Open Access Journals (Sweden)

Sri Rustiyanti

2013-03-01

Full Text Available ABSTRACT   This paper reveals textual and contextual Randai, among other things, an analysis of Gerak Ga­ lombang Randai, an analysis of the character of Anak Randai, and at the end of the study series, to reveal the values contained in Randai as a cultural reality, which in principle is an inseparable part of the existence of Minangkabau community as the cultural support. The variety of motion used in Gerak Galombang Randai is not only a decoration of the motion beauty (tangible, but it also can be translated, as well as a symbol or emblem that has educational meanings (intangible, and can be an example of the daily life of the indigenous Minangkabau society.   Keywords: Minang Dance aesthetic, Randai, textual­contextual analysis     ABSTRAK   Tulisan ini mengungkap teksual dan kontekstual Randai, di antaranya, analisis terhadap gerak galombang Randai, analisis karakter tokoh anak Randai, dan sebagai akhir dari rang- kaian penelitian ini, mengungkapkan nilai-nilai yang terdapat pada Randai sebagai realitas budaya, yang pada prinsipnya merupakan bagian yang tak dapat dipisahkan dari eksistensi masyarakat Minangkabau sebagai penyangga kebudayaan. Ragam gerak yang digunakan dalam gerak galombang Randai itu kiranya tidak hanya sekedar hiasan keindahan gerak be- laka (tangibel, namun ia dapat diterjemahkan, sekaligus merupakan simbol atau lambang yang bermakna  mendidik (intangibel, dan dapat   menjadi teladan dalam kehidupan se- hari-hari dalam masyarakat adat di Minangkabau.   Kata Kunci: estetika Tari Minang, Randai, analisis tekstual-kontekstual

Developments and trends in fruit bar production and characterization.

Science.gov (United States)

Orrego, C E; Salgado, N; Botero, C A

2014-01-01

Fruits serve as a source of energy, vitamins, minerals, and dietary fiber. One of the barriers in increasing fruit and vegetables consumption is time required to prepare them. Overall, fruit bars have a far greater nutritional value than the fresh fruits because all nutrients are concentrated and, therefore, would be a convenience food assortment to benefit from the health benefits of fruits. The consumers prefer fruit bars that are more tasted followed by proper textural features that could be obtained by establishing the equilibrium of ingredients, the proper choosing of manufacturing stages and the control of the product final moisture content. Fruit bar preparations may include a mixture of pulps, fresh or dried fruit, sugar, binders, and a variety of minor ingredients. Additionally to the conventional steps of manufacturing (pulping, homogenizing, heating, concentrating, and drying) there have been proposed the use of gelled fruit matrices, dried gels or sponges, and extruders as new trends for processing fruit bars. Different single-type dehydration or combined methods include, in order of increasing process time, air-infrared, vacuum and vacuum-microwave drying convective-solar drying, convective drying, and freeze drying are also suggested as alternative to solar traditional drying stage. The dehydration methods that use vacuum exhibited not only higher retention of antioxidants but also better color, texture, and rehydration capacity. Antioxidant activity resulting from the presence of phenolic compounds in the bars is well established. Besides this, fruit bars are also important sources of carbohydrates and minerals. Given the wide range of bioactive factors in fresh fruits that are preserved in fruit bars, it is plausible that their uptake consumption have a positive effect in reducing the risk of many diseases.

Device for moving fuel elements and control bars from one place to another in reactor core

International Nuclear Information System (INIS)

Hoffmeister, B.

1976-01-01

A description is given of a device, including a gripper, for manipulation of fuel elements and control bars, or rods, in a reactor core in which a vertical mast is provided in which the gripper is nonrotatably reciprocable. The mast is rotatable on a work platform and latch elements are provided to halt the mast in selected rotated positions on the platform. Abutment means are also provided to limit the rotary movement of the mast on the platform to 360 0 . 11 Claims, 6 drawing figures

Development of self-sensing BFRP bars with distributed optic fiber sensors

Science.gov (United States)

Tang, Yongsheng; Wu, Zhishen; Yang, Caiqian; Shen, Sheng; Wu, Gang; Hong, Wan

2009-03-01

In this paper, a new type of self-sensing basalt fiber reinforced polymer (BFRP) bars is developed with using the Brillouin scattering-based distributed optic fiber sensing technique. During the fabrication, optic fiber without buffer and sheath as a core is firstly reinforced through braiding around mechanically dry continuous basalt fiber sheath in order to survive the pulling-shoving process of manufacturing the BFRP bars. The optic fiber with dry basalt fiber sheath as a core embedded further in the BFRP bars will be impregnated well with epoxy resin during the pulling-shoving process. The bond between the optic fiber and the basalt fiber sheath as well as between the basalt fiber sheath and the FRP bar can be controlled and ensured. Therefore, the measuring error due to the slippage between the optic fiber core and the coating can be improved. Moreover, epoxy resin of the segments, where the connection of optic fibers will be performed, is uncured by isolating heat from these parts of the bar during the manufacture. Consequently, the optic fiber in these segments of the bar can be easily taken out, and the connection between optic fibers can be smoothly carried out. Finally, a series of experiments are performed to study the sensing and mechanical properties of the propose BFRP bars. The experimental results show that the self-sensing BFRP bar is characterized by not only excellent accuracy, repeatability and linearity for strain measuring but also good mechanical property.

Configuration Database for BaBar On-line

International Nuclear Information System (INIS)

Salnikov, Andrei

2003-01-01

The configuration database is one of the vital systems in the BaBar on-line system. It provides services for the different parts of the data acquisition system and control system, which require run-time parameters. The original design and implementation of the configuration database played a significant role in the successful BaBar operations since the beginning of experiment. Recent additions to the design of the configuration database provide better means for the management of data and add new tools to simplify main configuration tasks. We describe the design of the configuration database, its implementation with the Objectivity/DB object-oriented database, and our experience collected during the years of operation

Barred spiral structure of galaxies

International Nuclear Information System (INIS)

Chen, Z.; Weng, s.; Xu, M.

1982-01-01

Observational data indicate the grand design of spiral or barred spiral structure in disk galaxies. The problem of spiral structure has been thoroughly investigated by C. C. Lin and his collaborators, but yet the problem of barred spiral structure has not been investigated systematically, although much work has been done, such as in Ref. 3--7. Using the gasdynamic model for galaxies and a method of integral transform presented in Ref. 1, we investigated the barred spiral structure and obtained an analytical solution. It gives the large-scale pattern of barred-spirals, which is in fairly good agreement with observational data

Cognitive and Mood Effects of a Nutrient Enriched Breakfast Bar in Healthy Adults: A Randomised, Double-Blind, Placebo-Controlled, Parallel Groups Study

Directory of Open Access Journals (Sweden)

David O. Kennedy

2017-12-01

Full Text Available Objectives: Few previous studies have assessed the effects of concomitant administration of multiple potentially psychoactive nutrients. Methods: 95 healthy adult participants consumed either a nutrient enriched breakfast bar (containing α-Linolenic acid, l-tyrosine, l-theanine, vitamins, minerals and 21.5 mg of caffeine or an isocaloric, macronutrient matched control bar for 56 days. Cognitive function and mood were assessed pre-dose and at 40- and 160-min post-dose on the 1st and 56th day of the intervention period. Results: The results demonstrated acute effects of treatment across post-dose assessments on both assessment days in terms of alertness, and on tasks assessing attention, working and episodic memory and executive function, including cognitively demanding Serial subtraction and Rapid Visual Information Processing tasks. There were no evident chronic effects independent of the breakfast bars’ acute effects. Discussion: These results demonstrate that a nutrient enriched breakfast bar with low caffeine content can exert striking beneficial effects on acute cognitive function and alertness.

Comparison of S. cerevisiae F-BAR domain structures reveals a conserved inositol phosphate binding site

Science.gov (United States)

Moravcevic, Katarina; Alvarado, Diego; Schmitz, Karl R.; Kenniston, Jon A.; Mendrola, Jeannine M.; Ferguson, Kathryn M.; Lemmon, Mark A.

2015-01-01

SUMMARY F-BAR domains control membrane interactions in endocytosis, cytokinesis, and cell signaling. Although generally thought to bind curved membranes containing negatively charged phospholipids, numerous functional studies argue that differences in lipid-binding selectivities of F-BAR domains are functionally important. Here, we compare membrane-binding properties of the S. cerevisiae F-BAR domains in vitro and in vivo. Whereas some F-BAR domains (such as Bzz1p and Hof1p F-BARs) bind equally well to all phospholipids, the F-BAR domain from the RhoGAP Rgd1p preferentially binds phosphoinositides. We determined X-ray crystal structures of F-BAR domains from Hof1p and Rgd1p, the latter bound to an inositol phosphate. The structures explain phospholipid-binding selectivity differences, and reveal an F-BAR phosphoinositide binding site that is fully conserved in a mammalian RhoGAP called Gmip, and is partly retained in certain other F-BAR domains. Our findings reveal previously unappreciated determinants of F-BAR domain lipid-binding specificity, and provide a basis for its prediction from sequence. PMID:25620000

ANALISIS PERBAIKAN SISTEM PENTANAHAN TELEKOMUNIKASI

Directory of Open Access Journals (Sweden)

Umar Umar

2015-04-01

Hasil dari penelitian ini adalah perbaikan sistem pentanahan site Kampung Baru dengan menggunakan konfigurasi single point connection window (SPCW, untuk mengamankan sistem telekomunikasi dari kebocoran arus dan petir serta imbasnya.  Perbaikan sistem pentanahan di site Kampung Baru menggunakan banyak elektroda yang membentuk persegi dikarenakan topografi tempat di sana yang memungkinkan dan efektif adalah menggunakan sistem tersebut. Berdasarkan hasil analisis dan perhitungan perbaikan sistem di site Kampung Baru, didapatkan nilai perhitungan sistem pentanahan adalah 1.34 Ohm serta pengukurannya 1.21-1.25 Ohm.

Implementation of a workplace smoking ban in bars: The limits of local discretion

Directory of Open Access Journals (Sweden)

Bero Lisa A

2008-12-01

Full Text Available Abstract Background In January 1998, the California state legislature extended a workplace smoking ban to bars. The purpose of this study was to explore the conditions that facilitate or hinder compliance with a smoking ban in bars. Methods We studied the implementation of the smoking ban in bars by interviewing three sets of policy participants: bar employers responsible for complying with the law; local government officials responsible for enforcing the law; and tobacco control activists who facilitated implementation. We transcribed the interviews and did a qualitative analysis of the text. Results The conditions that facilitated bar owners' compliance with a smoking ban in bars included: if the cost to comply was minimal; if the bars with which they were in competition were in compliance with the smoking ban; and if there was authoritative, consistent, coordinated, and uniform enforcement. Conversely, the conditions that hindered compliance included: if the law had minimal sanctions; if competing bars in the area allowed smoking; and if enforcement was delayed or inadequate. Conclusion Many local enforcers wished to forfeit their local discretion and believed the workplace smoking ban in bars would be best implemented by a state agency. The potential implication of this study is that, given the complex nature of local politics, smoking bans in bars are best implemented at a broader provincial or national level.

Implementation of a workplace smoking ban in bars: the limits of local discretion.

Science.gov (United States)

Montini, Theresa; Bero, Lisa A

2008-12-08

In January 1998, the California state legislature extended a workplace smoking ban to bars. The purpose of this study was to explore the conditions that facilitate or hinder compliance with a smoking ban in bars. We studied the implementation of the smoking ban in bars by interviewing three sets of policy participants: bar employers responsible for complying with the law; local government officials responsible for enforcing the law; and tobacco control activists who facilitated implementation. We transcribed the interviews and did a qualitative analysis of the text. The conditions that facilitated bar owners' compliance with a smoking ban in bars included: if the cost to comply was minimal; if the bars with which they were in competition were in compliance with the smoking ban; and if there was authoritative, consistent, coordinated, and uniform enforcement. Conversely, the conditions that hindered compliance included: if the law had minimal sanctions; if competing bars in the area allowed smoking; and if enforcement was delayed or inadequate. Many local enforcers wished to forfeit their local discretion and believed the workplace smoking ban in bars would be best implemented by a state agency. The potential implication of this study is that, given the complex nature of local politics, smoking bans in bars are best implemented at a broader provincial or national level.

Too Much Bar and Not Enough Mitzvah? A Proposed Research Agenda on Bar/Bat Mitzvah

Science.gov (United States)

Schoenfeld, Stuart

2010-01-01

Jewish educators are understandably interested in research on how bar/bat mitzvah affect Jewish education or research on what Jewish schools have done to avoid the distortions of a focus on bar/bat mitzvah. Research might also focus on the somewhat different and more ambitious topic of the role that bar/bat mitzvah play in contemporary Jewish…

The location of late night bars and alcohol-related crashes in Houston, Texas.

Science.gov (United States)

Levine, Ned

2017-10-01

A study in the City of Houston, Texas, related the location of establishments primarily serving alcohol ("bars") after midnight to late night alcohol-related motor vehicle crashes. There were three data sets for 2007-09: 1) 764bars that were open after midnight; 2) 1660 alcohol-related crashes that occurred within the City of Houston between midnight and 6 am; and 3) 4689 modeling network road segments to which bars and alcohol-related crashes were assigned. Forty-five percent of the late night alcohol-related crashes were within a quarter mile of a late night bar. The bars were highly concentrated in 17 small bar clusters. Using the modeling network, Poisson-Gamma-CAR and Poisson-Lognormal-CAR spatial regression models showed a positive exponential relationship between late night alcohol-related crashes and the number of late nights bars and bar clusters, and a negative exponential relationship to distance to the nearest late night bar controlling for the type of road segment (freeway, principal arterial, minor arterial). A more general model dropped the bar cluster variable. Further, the Poisson-Gamma-CAR model appeared to produce a better representation than the Poisson-Lognormal-CAR model though the errors were different. The general Poisson-Gamma-CAR model showed that each late night bar increased the frequency of alcohol-related crashes on a segment by approximately 190%. For each mile closer a segment was to a late night bar, the likelihood increased by 42%. Copyright © 2017 Elsevier Ltd. All rights reserved.

Measurement and Interpretation of Moments in Inclusive Semileptonic Decays (bar B) → Xc (ell)-(bar ν)

International Nuclear Information System (INIS)

Luth, Vera

2011-01-01

We present results for the moments of observed spectra in inclusive semileptonic B-meson decays to charm hadrons (bar B) → X c (ell) - (bar ν). Moments of the hadronic-mass and the combined mass-and-energy spectra for different minimum electron or muon momenta between 0.8 and 1.9 GeV/c are obtained from a sample of 232 x 10 6 Γ(4S) → B(bar B) events, collected with the BABAR detector at the PEP-II asymmetric-energy B-meson factory at SLAC. We also present a reevaluation of the moments of electron-energy spectra and partial decay fractions B((bar B) → X c e - (bar ν)) for minimum electron momenta between 0.6 and 1.5 GeV/c based on a sample of 51 x 10 6 Γ(4S) → B(bar B) events. The measurements are used for the extraction of the total decay fraction, the Cabibbo-Kobayashi-Maskawa (CKM) matrix element |V cb |, the quark masses m b and m c , and four heavy-quark QCD parameters in the framework of a Heavy-Quark Expansion (HQE). We find B((bar B) → X c (ell) - (bar ν)) = (10.64 ± 0.17 ± 0.06)% and |V cb | = (42.05 ± 0.45 ± 0.70) x 10 -3 .

New strategies of reloads design and models of control bars in boiling water reactors; Nuevas estrategias de diseno de recargas y de patrones de barras de control en reactores de agua en ebullicion

Energy Technology Data Exchange (ETDEWEB)

Castillo M, J. A.; Ortiz S, J. J.; Perusquia del Cueto, R., E-mail: alejandro.castillo@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

2011-11-15

In this work the results obtained when analyzing new strategies in the reload designs of nuclear fuel and models of control bars, for boiling water reactors are presented. The idea is to analyze the behaviour of the reactor during an operation cycle, when the heuristic rules are not used (commonly used by expert engineers in both designs). Specifically was analyzed the rule of low leak and the load strategy Control Cell Core for the design of a fuel reload. In a same way was analyzed the rule of prohibiting the use of the intermediate positions in the control bars, as well as the construction of bar models based on load strategies type Control Cell Core. In the first analysis a balance and transition cycle were used. For the second analysis only a transition cycle was used, firstly with the reloads designed in the first analysis and later on with reloads built by other methods. For the simulation of the different configurations proposed in both cases, was used the code Simulate-3. To obtain the designs in both studies, the heuristic techniques or neural networks and taboo search were used. The obtained results show that it can be omitted of some rules used in the ambit for the mentioned designs and even so to obtain good results. To carry out this investigation was used Dell work station under Li nux platform. (Author)

Keefektifan Konseling Behavioral Teknik Modeling dan Konseling Analisis Transaksional Teknik Role Playing untuk Meminimalkan Kecenderungan Perilaku Agresif Siswa Sekolah Menengah Atas

Directory of Open Access Journals (Sweden)

I Ketut Gading

2017-11-01

Full Text Available Abstract: This study aims to determine the effectiveness of behavioral counseling using modeling technique and counseling transactional analysis using role playing technique to minimize student’s tendency of aggressive behavior. This experimental research with pretest-posttest control group design is taking samples using purposive sampling technique. The sample were 18 tenth grade students from Senior High School Laboratorium Universitas Pendidikan Ganesha who have high aggressive behavior. 18 sample were randomly assigned to three group, that is: (1 experimental group of behavioral counseling using modeling technique; (2 counseling transactional analysis using role playing technique group; and (3 control group. Data on aggressive behavior tendency before and after treatment were collected using questionnaire of aggressive behavior, then analyzed by t test. The results show: (1 behavioral counseling using modeling technique were effective to minimize the tendency of aggressive behavior; (2 counseling transactional analysis using role playing technique were effective to minimize the aggressive behavior; and (3 counseling transactional analysis using role playing technique were more effectively minimizes the tendency of aggressive behavior rather than behavioral counseling using modeling technique. Abstrak: Penelitian ini bertujuan untuk mengetahui keefektifan konseling behavioral teknik modeling dan konseling analisis transaksional teknik role playing untuk meminimalkan kecenderungan perilaku agresif siswa. Penelitian eksperimen dengan rancangan pretest-posttest control group design ini mengambil sampel dengan teknik purposive sampling. Sampel terdiri dari 18 orang siswa kelas X Sekolah Menengah Atas (SMA Laboratorium Universitas Pendidikan Ganesha yang memiliki perilaku agresif tinggi. 18 sampel dibagi secara acak dan merata pada tiga kelompok, yaitu: (1 kelompok eksperimen yang mendapatkan perlakuan konseling behavioral teknik modeling; (2

ANALISIS DAYA SAING KEDELAI INDONESIA

Directory of Open Access Journals (Sweden)

Sarwono Sarwono

2014-09-01

Full Text Available RCA (Revealed Comparative Advantage index of soybean in Indonesia from 1983 up to 2013 is less than one, mostly. It means that the competitiveness of soybean in Indonesia is low. The purpose of this study is to analyze the factors influence the soybean competitiveness. OLS (Ordinary Least Square was used as the analysis method. Hypotheses test based on that analysis model is not bias, so that, classic divergence test is needed. It is for getting the Best Linier Unbiased Estimator (BLUE appraisal. T statistic and F statistic were also applied. The result of this research shows that production and export have positive and significant influence. In addition, exchange rate and government policy do not influence the Indonesia soybean competitiveness.Indeks RCA (Revealed Comparative Advantage kedelai Indonesia dari tahun 1983-2013 kecenderungan bernilai kurang dari satu yang berarti daya saing kedelai Indonesia rendah.Penelitian ini bertujuan untuk menganalisis faktor-faktor yang mempengaruhi daya saing kedelai Indonesia.Metode analisis yang digunakan adalah Ordinary Least Square (OLS.Pengujian hipotesis berdasarkan model analisis tersebut tidak bias maka perlu dilakukan uji penyimpangan klasik yang tujuannya agar diperoleh penaksiran yang bersifat Best Linier Unbiased Estimator (BLUE.Pengujian statistik menggunakan uji t statistikdan uji f statistik.Hasil penelitian ini menunjukkan bahwa produksi dan ekspor berpengaruh secara positif dan signifikan terhadap daya saing kedelai Indonesia. Nilai tukar rupiah dan kebijakan pemerintah tidak berpengaruh terhadap daya saing kedelai Indonesia.

Expandable antivibration bar for a steam generator

International Nuclear Information System (INIS)

Lagally, H.O.

1986-01-01

A steam generator tube support structure comprises expandable antivibration bars positioned between rows of tubes in the steam generator and attached to retaining rings surrounding the bundle of tubes. The antivibration bars have adjacent bar sections with mating surfaces formed as inclined planes which upon relative longitudinal motion between the upper and lower bars provides a means to increase the overall thickness across the structure to the required value. The bar section is retained against longitudinal movement in take-up assembly whereas the bar section is movable longitudinally by rotation of a nut. (author)

Study of J/psi -> p(p)over-bar and J/psi -> n(n)over-bar

NARCIS (Netherlands)

Ablikim, M.; Achasov, M. N.; Ambrose, D. J.; An, F. F.; An, Q.; An, Z. H.; Bai, J. Z.; Ban, Y.; Becker, J.; Berger, N.; Bertani, M.; Bian, J. M.; Boger, E.; Bondarenko, O.; Boyko, I.; Briere, R. A.; Bytev, V.; Cai, X.; Calcaterra, A.; Cao, G. F.; Chang, J. F.; Chelkov, G.; Chen, G.; Chen, H. S.; Chen, J. C.; Chen, M. L.; Chen, S. J.; Chen, Y.; Chen, Y. B.; Cheng, H. P.; Chu, Y. P.; Cronin-Hennessy, D.; Dai, H. L.; Dai, J. P.; Dedovich, D.; Deng, Z. Y.; Denig, A.; Denysenko, I.; Destefanis, M.; Ding, W. M.; Ding, Y.; Dong, L. Y.; Dong, M. Y.; Du, S. X.; Fang, J.; Fang, S. S.; Fava, L.; Feldbauer, F.; Feng, C. Q.; Ferroli, R. B.; Fu, C. D.; Fu, J. L.; Gao, Y.; Geng, C.; Goetzen, K.; Gong, W. X.; Gradl, W.; Greco, M.; Gu, M. H.; Gu, Y. T.; Guan, Y. H.; Guo, A. Q.; Guo, L. B.; Guo, Y. P.; Han, Y. L.; Hao, X. Q.; Harris, F. A.; He, K. L.; He, M.; He, Z. Y.; Held, T.; Heng, Y. K.; Hou, Z. L.; Hu, H. M.; Hu, J. F.; Hu, T.; Huang, B.; Huang, G. M.; Huang, J. S.; Huang, X. T.; Huang, Y. P.; Hussain, T.; Ji, C. S.; Ji, Q.; Ji, X. B.; Ji, X. L.; Jia, L. K.; Jiang, L. L.; Jiang, X. S.; Jiao, J. B.; Jiao, Z.; Jin, D. P.; Jin, S.; Jing, F. F.; Kalantar-Nayestanaki, N.; Kavatsyuk, M.; Kuehn, W.; Lai, W.; Lange, J. S.; Leung, J. K. C.; Li, C. H.; Li, Cheng; Li, Cui; Li, D. M.; Li, F.; Li, G.; Li, H. B.; Li, J. C.; Li, K.; Li, Lei; Li, N. B.; Li, Q. J.; Li, S. L.; Li, W. D.; Li, W. G.; Li, X. L.; Li, X. N.; Li, X. Q.; Li, X. R.; Li, Z. B.; Liang, H.; Liang, Y. F.; Liang, Y. T.; Liao, G. R.; Liao, X. T.; Liu, B. J.; Liu, B. J.; Liu, C. L.; Liu, C. X.; Liu, C. Y.; Liu, F. H.; Liu, Fang; Liu, Feng; Liu, H.; Liu, H. B.; Liu, H. H.; Liu, H. M.; Liu, H. W.; Liu, J. P.; Liu, K. Y.; Liu, Kai; Liu, Kun; Liu, P. L.; Liu, S. B.; Liu, X.; Liu, X. H.; Liu, Y.; Liu, Y. B.; Liu, Z. A.; Liu, Zhiqiang; Liu, Zhiqing; Loehner, H.; Lu, G. R.; Lu, H. J.; Lu, J. G.; Lu, Q. W.; Lu, X. R.; Lu, Y. P.; Luo, C. L.; Luo, M. X.; Luo, T.; Luo, X. L.; Lv, M.; Ma, C. L.; Ma, F. C.; Ma, H. L.; Ma, Q. M.; Ma, S.; Ma, T.; Ma, X. Y.; Ma, Y.; Maas, F. E.; Maggiora, M.; Malik, Q. A.; Mao, H.; Mao, Y. J.; Mao, Z. P.; Messchendorp, J. G.; Min, J.; Min, T. J.; Mitchell, R. E.; Mo, X. H.; Morales, C. Morales; Motzko, C.; Muchnoi, N. Yu.; Nefedov, Y.; Nicholson, C.; Nikolaev, I. B.; Ning, Z.; Olsen, S. L.; Ouyang, Q.; Pacetti, S.; Park, J. W.; Pelizaeus, M.; Peters, K.; Ping, J. L.; Ping, R. G.; Poling, R.; Prencipe, E.; Pun, C. S. J.; Qi, M.; Qian, S.; Qiao, C. F.; Qin, X. S.; Qin, Y.; Qin, Z. H.; Qiu, J. F.; Rashid, K. H.; Rong, G.; Ruan, X. D.; Sarantsev, A.; Schulze, J.; Shao, M.; Shen, C. P.; Shen, X. Y.; Sheng, H. Y.; Shepherd, M. R.; Song, X. Y.; Spataro, S.; Spruck, B.; Sun, D. H.; Sun, G. X.; Sun, J. F.; Sun, S. S.; Sun, X. D.; Sun, Y. J.; Sun, Y. Z.; Sun, Z. J.; Sun, Z. T.; Tang, C. J.; Tang, X.; Thorndike, E. H.; Tian, H. L.; Toth, D.; Ullrich, M.; Varner, G. S.; Wang, B.; Wang, B. Q.; Wang, K.; Wang, L. L.; Wang, L. S.; Wang, M.; Wang, P.; Wang, P. L.; Wang, Q.; Wang, Q. J.; Wang, S. G.; Wang, X. F.; Wang, X. L.; Wang, Y. D.; Wang, Y. F.; Wang, Y. Q.; Wang, Z.; Wang, Z. G.; Wang, Z. Y.; Wei, D. H.; Weidenkaff, P.; Wen, Q. G.; Wen, S. P.; Werner, M.; Wiedner, U.; Wu, L. H.; Wu, N.; Wu, S. X.; Wu, W.; Wu, Z.; Xia, L. G.; Xiao, Z. J.; Xie, Y. G.; Xiu, Q. L.; Xu, G. F.; Xu, G. M.; Xu, H.; Xu, Q. J.; Xu, X. P.; Xu, Y.; Xu, Z. R.; Xue, F.; Xue, Z.; Yan, L.; Yan, W. B.; Yan, Y. H.; Yang, H. X.; Yang, T.; Yang, Y.; Yang, Y. X.; Ye, H.; Ye, M.; Ye, M. H.; Yu, B. X.; Yu, C. X.; Yu, J. S.; Yu, S. P.; Yuan, C. Z.; Yuan, W. L.; Yuan, Y.; Zafar, A. A.; Zallo, A.; Zeng, Y.; Zhang, B. X.; Zhang, B. Y.; Zhang, C. C.; Zhang, D. H.; Zhang, H. H.; Zhang, H. Y.; Zhang, J.; Zhang, J. G.; Zhang, J. Q.; Zhang, J. W.; Zhang, J. Y.; Zhang, J. Z.; Zhang, L.; Zhang, S. H.; Zhang, T. R.; Zhang, X. J.; Zhang, X. Y.; Zhang, Y.; Zhang, Y. H.; Zhang, Y. S.; Zhang, Z. P.; Zhang, Z. Y.; Zhao, G.; Zhao, H. S.; Zhao, J. W.; Zhao, K. X.; Zhao, Lei; Zhao, Ling; Zhao, M. G.; Zhao, Q.; Zhao, S. J.; Zhao, T. C.; Zhao, X. H.; Zhao, Y. B.; Zhao, Z. G.; Zhemchugov, A.; Zheng, B.; Zheng, J. P.; Zheng, Y. H.; Zheng, Z. P.; Zhong, B.; Zhong, J.; Zhou, L.; Zhou, X. K.; Zhou, X. R.; Zhu, C.; Zhu, K.; Zhu, K. J.; Zhu, S. H.; Zhu, X. L.; Zhu, X. W.; Zhu, Y. M.; Zhu, Y. S.; Zhu, Z. A.; Zhuang, J.; Zou, B. S.; Zou, J. H.; Zuo, J. X.

2012-01-01

The decays J/psi -> p (p) over bar and J/psi -> n (n) over bar have been investigated with a sample of 225.2 x 10(6) J/psi events collected with the BESIII detector at the BEPCII e(+)e(-) collider. The branching fractions are determined to be B(J/psi -> p (p) over bar) = (2.112 +/- 0.004 +/- 0.031 x

Analisis Pengaruh Display Interior Terhadap Perilaku Pembelian Impulsif Konsumen Indomaret Pontianak

Directory of Open Access Journals (Sweden)

Ana Fitriana

2016-07-01

Full Text Available Pembelian impulsif adalah kecenderungan membeli produk atau jasa dengan tidak terencana, selanjutnya ketika pembelian sering tidak terencana, maka umumnya konsumen membeli produk atau jasa yang tidak terdaftar dalam daftar belanja. Sejalan dengan tujuan pemasar, pembelian tidak terencana ini berdampak sangat positif bagi pihak perusahaan. Salah satu perilaku konsumen yang sangat penting adalah perilaku belanja impulsif. Penelitian ini bertujuan untuk mengetahui pengaruh display interior pada Indomaret Pontianak terhadap impulsive buying konsumennya. Metode penelitian yang digunakan adalah penelitian kuantitatif. Populasi penelitian ini adalah konsumen Indomaret Pontianak, sebanyak 100 responden dipilih secara accidental sampling sebagai sampel penelitian. Metode pengumpulan data yang digunakan adalah metode pengumpulan data primer dengan teknik pengumpulan data kuesioner. Teknik analisis data yang digunakan adalah uji validitas dan reliabilitas, analisis koefisien determinasi, analisis regresi berganda dan uji hipotesis.Hasil perhitungan data menggunakan SPSS for windows ver 16 menunjukan secara simultan pengaruh display interior terhadap impulsive buying diketahui berpengaruh sebesar 61,31%. Sedangkan 38,69% dipengaruhi oleh faktor lain yang tidak diteliti didalam penelitian ini. Secara parsial tiga variabel bebas yaitu pengadaan barang, pengelompokan barang, dan penyusunan barang dan pencahayaan mempunyai pengaruh signifikan terhadap Impulsive buying.   Kata kunci — Pengadaan barang, Pengelompokan barang, Penyusunan barang dan pencahayaan, Perilaku Pembelian Impulsif

Membrane-sculpting BAR domains generate stable lipid microdomains

DEFF Research Database (Denmark)

Zhao, Hongxia; Michelot, Alphée; Koskela, Essi V.

2013-01-01

Bin-Amphiphysin-Rvs (BAR) domain proteins are central regulators of many cellular processes involving membrane dynamics. BAR domains sculpt phosphoinositide-rich membranes to generate membrane protrusions or invaginations. Here, we report that, in addition to regulating membrane geometry, BAR...... domains can generate extremely stable lipid microdomains by "freezing" phosphoinositide dynamics. This is a general feature of BAR domains, because the yeast endocytic BAR and Fes/CIP4 homology BAR (F-BAR) domains, the inverse BAR domain of Pinkbar, and the eisosomal BAR protein Lsp1 induced...... phosphoinositide clustering and halted lipid diffusion, despite differences in mechanisms of membrane interactions. Lsp1 displays comparable low diffusion rates in vitro and in vivo, suggesting that BAR domain proteins also generate stable phosphoinositide microdomains in cells. These results uncover a conserved...

Thiocyanate ligands as crucial elements for regeneration and photo-degradation in TiO2 vertical bar dye vertical bar CuI solar cells

International Nuclear Information System (INIS)

Sirimanne, P.M.; Tributsch, H.

2006-01-01

Size control of CuI grains and thus better-matched interfaces were observed in the presence of crystal growth inhibitors in the CuI coating solution for TiO 2 vertical bar dye vertical bar CuI solar cells. Evidence is given that these growth inhibitor molecules simultaneously act as an electron transfer mediator between the CuI and dye molecules via thiocyanate bridges. A reverse reaction of injected electrons from TiO 2 nanoparticles electrochemically inactivates the thiocyanate electron transfer bridge in the illuminated cells causing photo-degradation

Membrane-Sculpting BAR Domains Generate Stable Lipid Microdomains

Science.gov (United States)

Zhao, Hongxia; Michelot, Alphée; Koskela, Essi V.; Tkach, Vadym; Stamou, Dimitrios; Drubin, David G.; Lappalainen, Pekka

2014-01-01

SUMMARY Bin-Amphiphysin-Rvs (BAR) domain proteins are central regulators of many cellular processes involving membrane dynamics. BAR domains sculpt phosphoinositide-rich membranes to generate membrane protrusions or invaginations. Here, we report that, in addition to regulating membrane geometry, BAR domains can generate extremely stable lipid microdomains by “freezing” phosphoinositide dynamics. This is a general feature of BAR domains, because the yeast endocytic BAR and Fes/CIP4 homology BAR (F-BAR) domains, the inverse BAR domain of Pinkbar, and the eisosomal BAR protein Lsp1 induced phosphoinositide clustering and halted lipid diffusion, despite differences in mechanisms of membrane interactions. Lsp1 displays comparable low diffusion rates in vitro and in vivo, suggesting that BAR domain proteins also generate stable phosphoinositide microdomains in cells. These results uncover a conserved role for BAR superfamily proteins in regulating lipid dynamics within membranes. Stable microdomains induced by BAR domain scaffolds and specific lipids can generate phase boundaries and diffusion barriers, which may have profound impacts on diverse cellular processes. PMID:24055060

The BaBar Mini

International Nuclear Information System (INIS)

Brown, David N.

2003-01-01

BaBar has recently deployed a new event data format referred to as the Mini. The mini uses efficient packing and aggressive noise suppression to represent the average reconstructed BaBar event in under 7 KBytes. The Mini packs detector information into simple transient data objects, which are then aggregated into roughly 10 composite persistent objects per event. The Mini currently uses Objectivity persistence, and it is being ported to use Root persistence. The Mini contains enough information to support detailed detector studies, while remaining small and fast enough to be used directly in physics analysis. Mini output is customizable, allowing users to both truncate unnecessary content or add content, depending on their needs. The Mini has now replaced three older formats as the primary output of BaBar event reconstruction. A reduced form of the Mini will soon replace the physics analysis format as well, giving BaBar a single, flexible event data format covering all its needs

The BaBar mini

International Nuclear Information System (INIS)

Brown, David N.; BaBar Collaboration

2003-01-01

BaBar has recently deployed a new event data format referred to as the Mini. The mini uses efficient packing and aggressive noise suppression to represent the average reconstructed BaBar event in under 7 KBytes. The Mini packs detector information into simple transient data objects, which are then aggregated into roughly 10 composite persistent objects per event. The Mini currently uses Objectivity persistence, and it is being ported to use Root persistence. The Mini contains enough information to support detailed detector studies, while remaining small and fast enough to be used directly in physics analysis. Mini output is customizable, allowing users to both truncate unnecessary content or add content, depending on their needs. The Mini has now replaced three older formats as the primary output of BaBar event reconstruction. A reduced form of the Mini will soon replace the physics analysis format as well, giving BaBar a single, flexible event data format covering all its needs

A mathematical high bar-human body model for analysing and interpreting mechanical-energetic processes on the high bar.

Science.gov (United States)

Arampatzis, A; Brüggemann, G P

1998-12-01

The aims of this study were: 1. To study the transfer of energy between the high bar and the gymnast. 2. To develop criteria from the utilisation of high bar elasticity and the utilisation of muscle capacity to assess the effectiveness of a movement solution. 3. To study the influence of varying segment movement upon release parameters. For these purposes a model of the human body attached to the high bar (high bar-human body model) was developed. The human body was modelled using a 15-segment body system. The joint-beam element method (superelement) was employed for modelling the high bar. A superelement consists of four rigid segments connected by joints (two Cardan joints and one rotational-translational joint) and springs (seven rotation springs and one tension-compression spring). The high bar was modelled using three superelements. The input data required for the high bar human body model were collected with video-kinematographic (50 Hz) and dynamometric (500 Hz) techniques. Masses and moments of inertia of the 15 segments were calculated using the data from the Zatsiorsky et al. (1984) model. There are two major phases characteristic of the giant swing prior to dismounts from the high bar. In the first phase the gymnast attempts to supply energy to the high bar-humanbody system through muscle activity and to store this energy in the high bar. The difference between the energy transferred to the high bar and the reduction in the total energy of the body could be adopted as a criterion for the utilisation of high bar elasticity. The energy previously transferred into the high bar is returned to the body during the second phase. An advantageous increase in total body energy at the end of the exercise could only be obtained through muscle energy supply. An index characterising the utilisation of muscle capacity was developed out of the difference between the increase in total body energy and the energy returned from the high bar. A delayed and initially slow but

Finite Element Analysis of IPS Empress II Ceramic Bridge Reinforced by Zirconia Bar.

Science.gov (United States)

Kermanshah, H; Bitaraf, T; Geramy, A

2012-01-01

The aim of this study was to determine the effect of trenched zirconia bar on the von Mises stress distribution of IPS -Empress II core ceramics. The three-dimensional model including a three-unit bridge from the second premolar to the second molar was designed. The model was reinforced with zirconia bar (ZB), zirconia bar with vertical trench (VZB) and zirconia bar with horizontal trench (HZB) (cross sections of these bars were circular). The model without zirconia bar was designed as the control. The bridges were loaded by 200 N and 500 N on the occlusal surface at the middle of the pontic component and von Mises stresses were evaluated along a defined path. IN THE CONNECTOR AREA, VON MISES STRESS IN MPA WERE APPROXIMATELY IDENTICAL IN THE SPECIMENS WITH ZB (AT MOLAR CONNECTOR (MC): 4.75 and at premolar connector (PC): 6.40) and without ZB (MC: 5.50, PC: 6.68), and considerable differences were not recognized. Whereas, Von-Mises stress (MPa) in the specimens with horizontal trenched Zirconia bar (HZB) (MC: 3.91, PC: 2.44) and Vertical trenched Zirconia bar (VZB) (MC: 2.53, PC: 2.56) was decreased considerably. Embeded trenched zirconia bar could reinforce IPS-Empress II at the connector area which is a main failure region in all ceramic fixed partial dentures.

Measurement of the absolute branching fraction of D-vertical bar -> (K)over-bar(0)e(vertical bar) nu(e) via (K)over-bar(0) -> pi(0)pi(0)

NARCIS (Netherlands)

Ablikim, M.; Achasov, N.; Ai, X. C.; Albayrak, O.; Albrecht, M.; Ambrose, D. J.; Amoroso, A.; An, F. F.; An, Q.; Bai, J. Z.; Ferroli, R. Baldini; Ban, Y.; Bennett, D. W.; Bennett, J. V.; Bertani, M.; Bettonin, D.; Bian, J. M.; Bianchi, F.; Boger, E.; Boyko, I.; Briere, R. A.; Cai, H.; Cai, X.; Cakir, O.; Caleaterra, A.; Cao, G. F.; Cetin, S. A.; Chang, J. F.; Chelkov, G.; Chen, G.; Chen, H. S.; Chen, H. Y.; Chen, J. C.; Chen, M. L.; Chen, S.; Chen, S. J.; Chen, X.; Chen, X. R.; Chen, Y. B.; Cheng, H. P.; Chu, X. K.; Cibinetto, G.; Dai, H. L.; Dai, J. P.; Dbeyssi, A.; Dedovich, D.; Deng, Z. Y.; Denig, A.; Denysenko, I.; Destefanis, M.; De Mori, F.; Ding, Y.; Dong, C.; Dong, J.; Dong, L. Y.; Dong, M. Y.; Dou, Z. L.; Du, S. X.; Duan, P. F.; Fan, J. Z.; Fang, J.; Fang, S. S.; Fang, X.; Fang, Y.; Farinelli, R.; Fava, L.; Fedorov, O.; Feldbauer, F.; Felici, G.; Feng, C. Q.; Fioravanti, E.; Fritsch, M.; Fu, C. D.; Gao, Q.; Gao, X. L.; Gao, X. Y.; Gao, Y.; Gao, Z.; Garzia, I.; Goetzen, K.; Gong, L.; Gong, W. X.; Gradl, W.; Greco, M.; Gu, M. H.; Gu, Y. T.; Guan, Y. H.; Guo, A. Q.; Guo, L. B.; Guo, R. P.; Guo, Y.; Guo, Y. P.; Haddadi, Z.; Hafner, A.; Han, S.; Hao, X. Q.; Harris, F. A.; He, K. L.; Held, T.; Heng, Y. K.; Hou, Z. L.; Hu, C.; Hu, H. M.; Hu, J. F.; Hu, T.; Hu, Y.; Huang, G. S.; Huang, J. S.; Huang, X. T.; Huang, X. Z.; Huang, Y.; Huang, Z. L.; Hussain, T.; Ji, Q.; Ji, Q. P.; Ji, X. B.; Ji, X. L.; Jiang, L. W.; Jiang, X. S.; Jiang, X. Y.; Jiao, J. B.; Jiao, Z.; Jin, D. P.; Jin, S.; Johansson, T.; Julin, A.; Kalantar-Nayestanaki, N.; Kang, X. L.; Kang, X. S.; Kavatsyuk, M.; Ke, B. C.; Kiese, P.; Kliemt, R.; Kloss, B.; Kolc, O. B.; Kopf, B.; Kornicer, M.; Kupse, A.; Kuehn, W.; Lange, J. S.; Lara, M.; Larin, P.; Leng, C.; Li, C.; Li, Cheng; Li, D. M.; Li, F.; Li, F. Y.; Li, G.; Li, H. B.; Li, H. J.; Li, J. C.; Li, Jin; Li, K.; Li, K.; Li, Lei; Li, P. R.; Li, Q. Y.; Li, T.; Li, W. D.; Li, W. G.; Li, X. L.; Li, X. N.; Li, X. Q.; Li, Y. B.; Li, Z. B.; Liang, H.; Liang, Y. F.; Liang, Y. T.; Liao, G. R.; Lin, D. X.; Liu, B.; Liu, B. J.; Liu, C. X.; Liu, D.; Liu, F. H.; Liu, Fang; Liu, Feng; Liu, H. B.; Liu, H. H.; Liu, H. H.; Liu, H. M.; Liu, J.; Liu, J. B.; Liu, J. P.; Liu, J. Y.; Liu, K.; Liu, K. Y.; Liu, L. D.; Liu, P. L.; Liu, Q.; Liu, S. B.; Liu, X.; Liu, Y. B.; Liu, Z. A.; Liu, Zhiqing; Loehner, H.; Lou, X. C.; Lu, H. J.; Lu, J. G.; Lu, Y.; Lu, Y. P.; Luo, C. L.; Luo, M. X.; Luo, T.; Luo, X. L.; Lu, X. R.; Ma, F. C.; Ma, H. L.; Ma, L. L.; Ma, M. M.; Ma, Q. M.; Ma, T.; Ma, X. N.; Ma, X. Y.; Ma, Y. M.; Maas, F. E.; Maggiora, M.; Mao, Y. J.; Mao, Z. P.; Marcello, S.; Messchendorp, J. G.; Min, J.; Min, T. J.; Mitchell, R. E.; Mo, X. H.; Mo, Y. J.; Morales, C. Morales; Muchnoi, N. Yu.; Muramatsu, H.; Nefedov, Y.; Nerling, F.; Nikolaev, I. B.; Ning, Z.; Nisar, S.; Niu, S. L.; Niu, X. Y.; Olsen, S. L.; Ouyang, Q.; Pacetti, S.; Pan, Y.; Patteri, P.; Pelizaeus, M.; Peng, H. P.; Peters, K.; Pettersson, J.; Ping, J. L.; Ping, R. G.; Poling, R.; Prasad, V.; Qi, H. R.; Qi, M.; Qian, S.; Qiao, C. F.; Qin, L. Q.; Qin, N.; Qin, X. S.; Qin, Z. H.; Qiu, J. F.; Rashid, K. H.; Redmer, C. F.; Ripka, M.; Rong, G.; Rosner, Ch.; Ruan, X. D.; Sarantsev, A.; Savrie, M.; Schoenning, K.; Schumann, S.; Shan, W.; Shao, M.; Shen, C. P.; Shen, P. X.; Shen, X. Y.; Sheng, H. Y.; Shi, M.; Song, W. M.; Song, X. Y.; Sosio, S.; Spataro, S.; Sun, G. X.; Sun, J. F.; Sun, S. S.; Sun, X. H.; Sun, Y. J.; Sun, Y. Z.; Sun, Z. J.; Sun, Z. T.; Tang, C. J.; Tang, X.; Tapan, I.; Thorndike, E. H.; Tiemens, M.; Ullrich, M.; Uman, I.; Varner, G. S.; Wang, B.; Wang, B. L.; Wang, D.; Wang, D. Y.; Wang, K.; Wang, L. L.; Wang, L. S.; Wang, M.; Wang, P.; Wang, P. L.; Wang, W.; Wang, W. P.; Wang, X. F.; Wang, Y.; Wang, Y. D.; Wang, Y. F.; Wang, Y. Q.; Wang, Z.; Wang, Z. G.; Wang, Z. H.; Wang, Z. Y.; Wang, Z. Y.; Weber, T.; Wei, D. H.; Weidenkaff, P.; Wen, S. P.; Wiedner, U.; Wolke, M.; Wu, L. H.; Wu, L. J.; Wu, Z.; Xia, L.; Xia, Y.; Xiao, D.; Xiao, H.; Xiao, Z. J.; Xie, Y. G.; Xiu, Q. L.; Xu, G. F.; Xu, J. J.; Xu, L.; Xu, Q. J.; Xu, Q. N.; Xu, X. P.; Yan, L.; Yan, W. B.; Yan, W. C.; Yan, Y. H.; Yang, H. J.; Yang, H. X.; Yang, L.; Yang, Y. X.; Ye, M.; Ye, M. H.; Yin, J. H.; Yu, B. X.; Yu, C. X.; Yu, J. S.; Yuan, C. Z.; Yuan, W. L.; Yuan, Y.; Yuncu, A.; Zafar, A. A.; Zallo, A.; Zeng, Y.; Zeng, Z.; Zhang, B. X.; Zhang, B. Y.; Zhang, C.; Zhang, C. C.; Zhang, D. H.; Zhang, H. H.; Zhang, H. Y.; Zhang, J.; Zhang, J. J.; Zhang, J. L.; Zhang, J. Q.; Zhang, J. W.; Zhang, J. Y.; Zhang, J. Z.; Zhang, K.; Zhang, L.; Zhang, S. Q.; Zhang, X. Y.; Zhang, Y.; Zhang, Y. H.; Zhang, Y. N.; Zhang, Y. T.; Zhang, Yu; Zhang, Z. H.; Zhang, Z. P.; Zhang, Z. Y.; Zhao, G.; Zhao, J. W.; Zhao, J. Y.; Zhao, J. Z.; Zhao, Lei; Zhao, Ling; Zhao, M. G.; Zhao, Q.; Zhao, Q. W.; Zhao, S. J.; Zhao, T. C.; Zhao, Y. B.; Zhao, Z. G.; Zhemchugov, A.; Zheng, B.; Zheng, J. P.; Zheng, W. J.; Zheng, Y. H.; Zhong, B.; Zhou, L.; Zhou, X.; Zhou, X. K.; Zhou, X. R.; Zhou, X. Y.; Zhu, K.; Zhu, K. J.; Zhu, S.; Zhu, S. H.; Zhu, X. L.; Zhu, Y. C.; Zhu, Y. S.; Zhu, Z. A.; Zhuangig, J.; Zotti, L.; Zou, B. S.; Zou, J. H.

2016-01-01

By analyzing 2.93 fb(-1) data collected at the center-of-mass energy root s = 3.773 GeV with the BESIII detector, we measure the absolute branching fraction of the semileptonic decay D+ -> (K) over bar (0)e(+)nu(e) to be B(D (+) -> (K) over bar (0)e(+)nu(e)) = (8.59 +/- 0.14 +/- 0.21)% using (K)

Did liberalising bar hours decrease traffic accidents?

Science.gov (United States)

Green, Colin P; Heywood, John S; Navarro, Maria

2014-05-01

Legal bar closing times in England and Wales have historically been early and uniform. Recent legislation liberalised closing times with the object of reducing social problems thought associated with drinking to "beat the clock." Indeed, using both difference in difference and synthetic control approaches we show that one consequence of this liberalisation was a decrease in traffic accidents. This decrease is heavily concentrated among younger drivers. Moreover, we provide evidence that the effect was most pronounced in the hours of the week directly affected by the liberalisation: late nights and early mornings on weekends. This evidence survives a series of robustness checks and suggests at least one socially positive consequence of extending bar hours. Copyright © 2014 Elsevier B.V. All rights reserved.

Risk analysis in the chemical industry; Analisis de riesgos en la industria quimica

Energy Technology Data Exchange (ETDEWEB)

Rea Soto, Rogelio; Sandoval Valenzuela, Salvador [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2000-07-01

The Instituto de Investigaciones Electricas has a group of risk analysis (GAR), specialized in the most advanced methodologies to apply them in diverse industries of the productive sector, such as the nuclear, the oil and the chemical industries. In this work the integrated methodology that the GAR uses to make risk analysis in the chemical and oil industries is described. These analyses have as an objective to make a meticulous evaluation of the system design, the operation practices, the maintenance and inspection policies and the emergency plans. [Spanish] El Instituto de Investigaciones Electricas cuenta con un grupo de analisis de riesgo (GAR), especializado en las metodologias mas avanzadas para aplicarlas en diversas industrias del sector productivo, como lo son la nuclear, la petrolera y la quimica. En este trabajo se describe la metodologia integrada que el GAR utiliza para realizar analisis de riesgos en las industrias quimica y petrolera. Estos analisis tienen como objetivo realizar una minuciosa evaluacion del diseno del sistema, las practicas de operacion, las politicas de mantenimiento e inspeccion y los planes de emergencia.

Analisis Reduksi Intensitas Cahaya Pada Smartphones’ Screen Protector Dan Dampaknya Pada Mata

Directory of Open Access Journals (Sweden)

Bhekti Kumorowati

2017-04-01

Full Text Available Analisis reduksi intensitas cahaya yang melewati screen protector dan identifikasi kemampuan screen protector sebagai pelindung mata dilakukan dengan mengukur reduksi intensitas cahaya menggunakan luxmeter, kemudian menetapkan fokus bahasan yang mencakup kemampuan cahaya menembus screen protector dan analisis fisis screen protector sebagai pelindung mata. Peran sebagai pelindung mata dikaji melalui pendekatan peristiwa polarisasi yaitu proses terserapnya sebagian arah getar cahaya. Dihasilkan sebagian arah getar cahaya layar smartphone sebelum masuk ke mata akan terserap oleh screen protector sehingga dapat memperlambat terjadinya degenerasi makula. Rekomendasi pemilihan screen protector bergantung pada besarnya koefisien atenuasi (koefisien penyerapan yang dimiliki masing-masing screen protector. Koefisien atenuasi terbesar dimiliki oleh screen protector jenis anti spy.

Bar Coding and Tracking in Pathology.

Science.gov (United States)

Hanna, Matthew G; Pantanowitz, Liron

2016-03-01

Bar coding and specimen tracking are intricately linked to pathology workflow and efficiency. In the pathology laboratory, bar coding facilitates many laboratory practices, including specimen tracking, automation, and quality management. Data obtained from bar coding can be used to identify, locate, standardize, and audit specimens to achieve maximal laboratory efficiency and patient safety. Variables that need to be considered when implementing and maintaining a bar coding and tracking system include assets to be labeled, bar code symbologies, hardware, software, workflow, and laboratory and information technology infrastructure as well as interoperability with the laboratory information system. This article addresses these issues, primarily focusing on surgical pathology. Copyright © 2016 Elsevier Inc. All rights reserved.

Characterization of Bars Induced by Interactions

Directory of Open Access Journals (Sweden)

Inma Martinez-Valpuesta

2016-05-01

Full Text Available Whether the formation of bars is triggered by interactions or by internal processes has been discussed for many decades. In this work, we study differences between both mechanisms by means of numerical simulations. We relate our analysis to fly-by interactions in different mass groups or clusters according to the velocity of the encounters. We find that once the bar is created, the interaction does not much affect its evolution. We also find that bars can be triggered purely by a slow interaction. Those bars affected or triggered by interaction stay for a longer time in the slow regime, i.e., the corotation radius is more than 1.4 times the bar radius.

Does smoke-free legislation and smoking outside bars increase feelings of stigmatization among smokers? Findings from the International Tobacco Control (ITC) Netherlands Survey

NARCIS (Netherlands)

Nagelhout, G.E.; Willemsen, M.C.; Gebhardt, W.A.; van den Putte, B.; Hitchman, S.C.; Crone, M.R.; Fong, G.T.; van der Heiden, S.; de Vries, H.

2012-01-01

This study examined whether smokers' perceived level of stigmatization changed after the implementation of smoke-free hospitality industry legislation and whether smokers who smoked outside bars reported more perceived stigmatization. Longitudinal data from the International Tobacco Control (ITC)

Hanging off a bar

NARCIS (Netherlands)

Mueller, F.; Walmink, W.; Toprak, C.; Bongers, Bert; Graether, E.; Hoven, van den E.A.W.H.

2012-01-01

Exertion Games involve physical effort and as a result can facilitate physical health benefits. We present Hanging off a Bar, an action hero-inspired Exertion Game in which players hang off an exercise bar over a virtual river for as long as possible. Initial observations from three events with

Raising the bar (6)

NARCIS (Netherlands)

Elhorst, Paul; Abreu, Maria; Amaral, Pedro; Bhattacharjee, Arnab; Corrado, Luisa; Doran, Justin; Fingleton, Bernard; Fuerst, Franz; Garretsen, Harry; Igliori, Danilo; Le Gallo, Julie; McCann, Philip; Monastiriotis, Vassilis; Quatraro, Francesco; Yu, Jihai

2017-01-01

Raising the bar (6). Spatial Economic Analysis. This editorial summarizes and comments on the papers published in issue 12(4) so as to raise the bar in applied spatial economic research and highlight new trends. The first paper addresses the question of whether 'jobs follow people' or 'people follow

Why Are Some Galaxies Not Barred?

Science.gov (United States)

Saha, Kanak; Elmegreen, Bruce

2018-05-01

Although more than two-thirds of star-forming disk galaxies in the local universe are barred, some galaxies remain unbarred, occupying the upper half of the Hubble tuning fork diagram. Numerical simulations almost always produce bars spontaneously, so it remains a challenge to understand how galaxies sometimes prevent bars from forming. Using a set of collisionless simulations, we first reproduce the common result that cold stellar disks surrounding a classical bulge become strongly unstable to non-axisymmetric perturbations, leading to the rapid formation of spiral structure and bars. However, our analyses show that galaxy models with compact classical bulges (whose average density is greater than or comparable to the disk density calculated within bulge half-mass radii) are able to prevent bar formation for at least 4 Gyr even when the stellar disk is maximal and having low Toomre Q. Such bar prevention is the result of several factors such as (a) a small inner Lindblad resonance with a high angular rate, which contaminates an incipient bar with x 2 orbits, and (b) rapid loss of angular momentum accompanied by a rapid heating in the center from initially strong bar and spiral instabilities in a low-Q disk; in other words, a rapid initial rise to a value larger than ∼5 of the ratio of the random energy to the rotational energy in the central region of the galaxy.

Optical properties of the PANDA barrel DIRC radiator bars

Energy Technology Data Exchange (ETDEWEB)

Kalicy, Grzegorz; Krebs, Marvin; Peters, Klaus [GSI, Darmstadt (Germany); Goethe Universitaet, Frankfurt (Germany); Schwarz, Carsten; Schwiening, Jochen [GSI, Darmstadt (Germany); Collaboration: PANDA-Collaboration

2015-07-01

The PANDA experiment at the Facility for Antiproton and Ion Research in Europe (FAIR) at GSI, Darmstadt, will study fundamental questions of hadron physics and QCD. A fast focusing DIRC (Detection of Internally Reflected Cherenkov light) counter will provide hadronic particle identification (PID) in the barrel region of the PANDA detector. To meet the PID requirements, the Barrel DIRC has to provide precise measurements of the Cherenkov angle, which is conserved for Cherenkov photons propagating through the radiator by total internal reflection. The radiators, rectangular bars made from fused silica, have to fulfill very strict optical and mechanical requirements. This includes the squareness and parallelism of the sides of the bars, sharp corners, and a very smooth surface polish, ensuring that the Cherenkov photons reach the optical sensors without angular distortions. Currently the Barrel DIRC is at the final design stage and several different bar shapes and fabrication methods are being considered for the final detector. An optical setup, consisting of a computer-controlled positioning and a multi-wavelength laser system, is used to evaluate the radiator bars to obtain critical values like transmittance and reflectivity. The current results and techniques are presented on this poster.

Preparation of a Breadfruit Flour Bar.

Science.gov (United States)

Nochera, Carmen L; Ragone, Diane

2016-05-20

Breadfruit is a nutritious, high energy food with a low quantity of protein but excellent protein quality. It has the potential to be developed into desired products which will help increase its utilization and add value to the crop. The overall purposes of this investigation were to develop a portable, nutritious, ready-to-eat breadfruit product (bar), test the sensory qualities of the product, and evaluate the nutritional properties of the product. Flour made from the Micronesian variety, Meinpadahk ( Artocarpus altilis × Artocarpus mariannensis ), was utilized for the development of the breadfruit bar. Breadfruit is a rich source of fiber, vitamins such as vitamin C, minerals such as potassium, and phytochemicals such as flavonoids. Nutritional labeling indicates that the breadfruit bar is high in carbohydrates and low in fat, and sensory evaluation indicates that 81% of the panelists found the bar acceptable while 19% disliked the bar. The breadfruit bar can provide an appealing and inexpensive gluten-free food source based on locally available breadfruit.

Integrating bar-code devices with computerized MC and A systems

International Nuclear Information System (INIS)

Anderson, L.K.; Boor, M.G.; Hurford, J.M.

1998-01-01

Over the past seven years, Los Alamos National Laboratory developed several generations of computerized nuclear materials control and accountability (MC and A) systems for tracking and reporting the storage, movement, and management of nuclear materials at domestic and international facilities. During the same period, Oak Ridge National Laboratory was involved with automated data acquisition (ADA) equipment, including installation of numerous bar-code scanning stations at various facilities to serve as input devices to computerized systems. Bar-code readers, as well as other ADA devices, reduce input errors, provide faster input, and allow the capture of data in remote areas where workstations do not exist. Los Alamos National Laboratory and Oak Ridge National Laboratory teamed together to implement the integration of bar-code hardware technology with computerized MC and A systems. With the expertise of both sites, the two technologies were successfully merged with little difficulty. Bar-code input is now available with several functions of the MC and A systems: material movements within material balance areas (MBAs), material movements between MBAs, and physical inventory verification. This paper describes the various components required for the integration of these MC and A systems with the installed bar-code reader devices and the future directions for these technologies

21 CFR 886.1650 - Ophthalmic bar prism.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic bar prism. 886.1650 Section 886.1650...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1650 Ophthalmic bar prism. (a) Identification. An ophthalmic bar prism is a device that is a bar composed of fused prisms of gradually increasing...

Analisis Termal High Pressure Feedwater Heater di PLTU PT. XYZ

Directory of Open Access Journals (Sweden)

Maria Ulfa Damayanti

2017-01-01

Full Text Available Abstrak- PT. XYZ mengoperasikan tiga unit Pembangkit Listrik Tenaga Uap (PLTU unit 3, 7 dan 8 berkapasitas 2.030 MegaWatt. Pada PLTU Paiton unit 7 dan 8 terdapat delapan buah feedwater heater yaitu empat buah Low Pressure Water Heater (LPWH, tiga buah High Pressure Water Heater (HPWH, dan sebuah dearator. Pada PLTU Paiton unit 7 dan 8 terdapat kerusakan pada HPWH 6 yang menyebabkan penurunan efisiensi dari siklus secara keseluruhan. Penurunan efisiensi dapat terjadi karena temperatur feedwater sebelum masuk ke boiler terlalu rendah, sehingga kalor yang dibutuhkan oleh boiler untuk memanaskan feedwater meningkat. Oleh karena itu konsumsi batubara akan meningkat dan menyebabkan terjadi kenaikan biaya operasional harian dalam sistem pembangkit. Dari data Divisi Produksi PT. XYZ Unit 7 dan 8 diperoleh spesifikasi HPWH 6, 7, dan 8 dan propertis fluida dalam HPWH 6, 7, dan 8. Data tersebut digunakan sebagai dasar analisis termal yang meliputi performa masing-masing HPH. Tahap selanjutnya dalam analisis termal adalah memvariasikan beban 25%, 50%, 75%, 100%, dan 105%. Tahap terakhir analisis adalah menghitung performa dengan variasi sumbatan (plug 5%, 10%, 15%, dan 20% sesuai dengan variasi beban. Hasil yang didapatkan dari penelitian tugas akhir ini adalah nilai effectiveness tertinggi tercapai pada pembebanan 100% serta menghasilkan pressure drop tertinggi pada pembebanan 105%, nilai effectiveness terbesar serta nilai pressure drop terkecil terjadi pada zona Condensing, serta sumbatan (plugging pada HPH akan menyebabkan penurunan nilai effectiveness dan kenaikan pressure drop sisi tube.

Bar code instrumentation for nuclear safeguards

International Nuclear Information System (INIS)

Bieber, A.M. Jr.

1984-01-01

This paper presents a brief overview of the basic principles of bar codes and the equipment used to make and to read bar code labels, and a summary of some of the more important factors that need to be considered in integrating bar codes into an information system

Method and apparatus to control the lateral motion of a long metal bar being formed by a mechanical process such as rolling or drawing

Science.gov (United States)

Chang, Tzyy-Shuh [Ann Arbor, MI; Huang, Hsun-Hau [Ann Arbor, MI; Lin, Chang-Hung [Ypsilanti, MI

2011-01-04

An apparatus to control lateral motion of a bar moving along a guidance path includes a pair of rotatable hubs each having at least first and second rollers at locations around the perimeter of the hub. The first roller has a first retaining groove of a first radius and the second roller has a second groove of a second radius smaller than the first radius. Each hub further includes at least one guiding element located between the rollers with a guide channel extending in the outer surface. A mounting system allows the hubs to be rotated between first and second positions. In the first position the first rollers oppose each other forming a guideway having a first, enlarged diameter for capturing a free end of an approaching bar. In the second position the second rollers form a second, smaller diameter to match the actual size of the bar.

First observations of $\\bar{B}_s^0\\to D^+D^-$, $D_s^+D^-$ and $D^0\\bar{D}^0$ decays

CERN Document Server

Aaij, R; Adeva, B; Adinolfi, M; Adrover, C; Affolder, A; Ajaltouni, Z; Albrecht, J; Alessio, F; Alexander, M; Ali, S; Alkhazov, G; Alvarez Cartelle, P; Alves Jr, A A; Amato, S; Amerio, S; Amhis, Y; Anderlini, L; Anderson, J; Andreassen, R; Appleby, R B; Aquines Gutierrez, O; Archilli, F; Artamonov, A; Artuso, M; Aslanides, E; Auriemma, G; Bachmann, S; Back, J J; Baesso, C; Balagura, V; Baldini, W; Barlow, R J; Barschel, C; Barsuk, S; Barter, W; Bauer, Th; Bay, A; Beddow, J; Bedeschi, F; Bediaga, I; Belogurov, S; Belous, K; Belyaev, I; Ben-Haim, E; Benayoun, M; Bencivenni, G; Benson, S; Benton, J; Berezhnoy, A; Bernet, R; Bettler, M -O; van Beuzekom, M; Bien, A; Bifani, S; Bird, T; Bizzeti, A; Bjørnstad, P M; Blake, T; Blanc, F; Blouw, J; Blusk, S; Bocci, V; Bondar, A; Bondar, N; Bonivento, W; Borghi, S; Borgia, A; Bowcock, T J V; Bowen, E; Bozzi, C; Brambach, T; van den Brand, J; Bressieux, J; Brett, D; Britsch, M; Britton, T; Brook, N H; Brown, H; Burducea, I; Bursche, A; Busetto, G; Buytaert, J; Cadeddu, S; Callot, O; Calvi, M; Calvo Gomez, M; Camboni, A; Campana, P; Carbone, A; Carboni, G; Cardinale, R; Cardini, A; Carranza-Mejia, H; Carson, L; Carvalho Akiba, K; Casse, G; Cattaneo, M; Cauet, Ch; Charles, M; Charpentier, Ph; Chen, P; Chiapolini, N; Chrzaszcz, M; Ciba, K; Cid Vidal, X; Ciezarek, G; Clarke, P E L; Clemencic, M; Cliff, H V; Closier, J; Coca, C; Coco, V; Cogan, J; Cogneras, E; Collins, P; Comerma-Montells, A; Contu, A; Cook, A; Coombes, M; Coquereau, S; Corti, G; Couturier, B; Cowan, G A; Craik, D; Cunliffe, S; Currie, R; D'Ambrosio, C; David, P; David, P N Y; De Bonis, I; De Bruyn, K; De Capua, S; De Cian, M; De Miranda, J M; De Oyanguren Campos, M; De Paula, L; De Silva, W; De Simone, P; Decamp, D; Deckenhoff, M; Del Buono, L; Derkach, D; Deschamps, O; Dettori, F; Di Canto, A; Dijkstra, H; Dogaru, M; Donleavy, S; Dordei, F; Dosil Suárez, A; Dossett, D; Dovbnya, A; Dupertuis, F; Dzhelyadin, R; Dziurda, A; Dzyuba, A; Easo, S; Egede, U; Egorychev, V; Eidelman, S; van Eijk, D; Eisenhardt, S; Eitschberger, U; Ekelhof, R; Eklund, L; El Rifai, I; Elsasser, Ch; Elsby, D; Falabella, A; Färber, C; Fardell, G; Farinelli, C; Farry, S; Fave, V; Ferguson, D; Fernandez Albor, V; Ferreira Rodrigues, F; Ferro-Luzzi, M; Filippov, S; Fitzpatrick, C; Fontana, M; Fontanelli, F; Forty, R; Francisco, O; Frank, M; Frei, C; Frosini, M; Furcas, S; Furfaro, E; Gallas Torreira, A; Galli, D; Gandelman, M; Gandini, P; Gao, Y; Garofoli, J; Garosi, P; Garra Tico, J; Garrido, L; Gaspar, C; Gauld, R; Gersabeck, E; Gersabeck, M; Gershon, T; Ghez, Ph; Gibson, V; Gligorov, V V; Göbel, C; Golubkov, D; Golutvin, A; Gomes, A; Gordon, H; Grabalosa Gándara, M; Graciani Diaz, R; Granado Cardoso, L A; Graugés, E; Graziani, G; Grecu, A; Greening, E; Gregson, S; Grünberg, O; Gui, B; Gushchin, E; Guz, Yu; Gys, T; Hadjivasiliou, C; Haefeli, G; Haen, C; Haines, S C; Hall, S; Hampson, T; Hansmann-Menzemer, S; Harnew, N; Harnew, S T; Harrison, J; Hartmann, T; He, J; Heijne, V; Hennessy, K; Henrard, P; Hernando Morata, J A; van Herwijnen, E; Hicks, E; Hill, D; Hoballah, M; Hombach, C; Hopchev, P; Hulsbergen, W; Hunt, P; Huse, T; Hussain, N; Hutchcroft, D; Hynds, D; Iakovenko, V; Idzik, M; Ilten, P; Jacobsson, R; Jaeger, A; Jans, E; Jaton, P; Jing, F; John, M; Johnson, D; Jones, C R; Jost, B; Kaballo, M; Kandybei, S; Karacson, M; Karbach, T M; Kenyon, I R; Kerzel, U; Ketel, T; Keune, A; Khanji, B; Kochebina, O; Komarov, I; Koopman, R F; Koppenburg, P; Korolev, M; Kozlinskiy, A; Kravchuk, L; Kreplin, K; Kreps, M; Krocker, G; Krokovny, P; Kruse, F; Kucharczyk, M; Kudryavtsev, V; Kvaratskheliya, T; La Thi, V N; Lacarrere, D; Lafferty, G; Lai, A; Lambert, D; Lambert, R W; Lanciotti, E; Lanfranchi, G; Langenbruch, C; Latham, T; Lazzeroni, C; Le Gac, R; van Leerdam, J; Lees, J -P; Lefèvre, R; Leflat, A; Lefrançois, J; Leo, S; Leroy, O; Leverington, B; Li, Y; Li Gioi, L; Liles, M; Lindner, R; Linn, C; Liu, B; Liu, G; von Loeben, J; Lohn, S; Lopes, J H; Lopez Asamar, E; Lopez-March, N; Lu, H; Lucchesi, D; Luisier, J; Luo, H; Machefert, F; Machikhiliyan, I V; Maciuc, F; Maev, O; Malde, S; Manca, G; Mancinelli, G; Marconi, U; Märki, R; Marks, J; Martellotti, G; Martens, A; Martin, L; Martín Sánchez, A; Martinelli, M; Martinez Santos, D; Martins Tostes, D; Massafferri, A; Matev, R; Mathe, Z; Matteuzzi, C; Maurice, E; Mazurov, A; McCarthy, J; McNulty, R; Mcnab, A; Meadows, B; Meier, F; Meissner, M; Merk, M; Milanes, D A; Minard, M -N; Molina Rodriguez, J; Monteil, S; Moran, D; Morawski, P; Morello, M J; Mountain, R; Mous, I; Muheim, F; Müller, K; Muresan, R; Muryn, B; Muster, B; Naik, P; Nakada, T; Nandakumar, R; Nasteva, I; Needham, M; Neufeld, N; Nguyen, A D; Nguyen, T D; Nguyen-Mau, C; Nicol, M; Niess, V; Niet, R; Nikitin, N; Nikodem, T; Nomerotski, A; Novoselov, A; Oblakowska-Mucha, A; Obraztsov, V; Oggero, S; Ogilvy, S; Okhrimenko, O; Oldeman, R; Orlandea, M; Otalora Goicochea, J M; Owen, P; Pal, B K; Palano, A; Palutan, M; Panman, J; Papanestis, A; Pappagallo, M; Parkes, C; Parkinson, C J; Passaleva, G; Patel, G D; Patel, M; Patrick, G N; Patrignani, C; Pavel-Nicorescu, C; Pazos Alvarez, A; Pellegrino, A; Penso, G; Pepe Altarelli, M; Perazzini, S; Perego, D L; Perez Trigo, E; Pérez-Calero Yzquierdo, A; Perret, P; Perrin-Terrin, M; Pessina, G; Petridis, K; Petrolini, A; Phan, A; Picatoste Olloqui, E; Pietrzyk, B; Pilař, T; Pinci, D; Playfer, S; Plo Casasus, M; Polci, F; Polok, G; Poluektov, A; Polycarpo, E; Popov, D; Popovici, B; Potterat, C; Powell, A; Prisciandaro, J; Pugatch, V; Puig Navarro, A; Punzi, G; Qian, W; Rademacker, J H; Rakotomiaramanana, B; Rangel, M S; Raniuk, I; Rauschmayr, N; Raven, G; Redford, S; Reid, M M; dos Reis, A C; Ricciardi, S; Richards, A; Rinnert, K; Rives Molina, V; Roa Romero, D A; Robbe, P; Rodrigues, E; Rodriguez Perez, P; Roiser, S; Romanovsky, V; Romero Vidal, A; Rouvinet, J; Ruf, T; Ruffini, F; Ruiz, H; Ruiz Valls, P; Sabatino, G; Saborido Silva, J J; Sagidova, N; Sail, P; Saitta, B; Salzmann, C; Sanmartin Sedes, B; Sannino, M; Santacesaria, R; Santamarina Rios, C; Santovetti, E; Sapunov, M; Sarti, A; Satriano, C; Satta, A; Savrie, M; Savrina, D; Schaack, P; Schiller, M; Schindler, H; Schlupp, M; Schmelling, M; Schmidt, B; Schneider, O; Schopper, A; Schune, M -H; Schwemmer, R; Sciascia, B; Sciubba, A; Seco, M; Semennikov, A; Senderowska, K; Sepp, I; Serra, N; Serrano, J; Seyfert, P; Shapkin, M; Shapoval, I; Shatalov, P; Shcheglov, Y; Shears, T; Shekhtman, L; Shevchenko, O; Shevchenko, V; Shires, A; Silva Coutinho, R; Skwarnicki, T; Smith, N A; Smith, E; Smith, M; Sokoloff, M D; Soler, F J P; Soomro, F; Souza, D; Souza De Paula, B; Spaan, B; Sparkes, A; Spradlin, P; Stagni, F; Stahl, S; Steinkamp, O; Stoica, S; Stone, S; Storaci, B; Straticiuc, M; Straumann, U; Subbiah, V K; Swientek, S; Syropoulos, V; Szczekowski, M; Szczypka, P; Szumlak, T; T'Jampens, S; Teklishyn, M; Teodorescu, E; Teubert, F; Thomas, C; Thomas, E; van Tilburg, J; Tisserand, V; Tobin, M; Tolk, S; Tonelli, D; Topp-Joergensen, S; Torr, N; Tournefier, E; Tourneur, S; Tran, M T; Tresch, M; Tsaregorodtsev, A; Tsopelas, P; Tuning, N; Ubeda Garcia, M; Ukleja, A; Urner, D; Uwer, U; Vagnoni, V; Valenti, G; Vazquez Gomez, R; Vazquez Regueiro, P; Vecchi, S; Velthuis, J J; Veltri, M; Veneziano, G; Vesterinen, M; Viaud, B; Vieira, D; Vilasis-Cardona, X; Vollhardt, A; Volyanskyy, D; Voong, D; Vorobyev, A; Vorobyev, V; Voß, C; Voss, H; Waldi, R; Wallace, R; Wandernoth, S; Wang, J; Ward, D R; Watson, N K; Webber, A D; Websdale, D; Whitehead, M; Wicht, J; Wiechczynski, J; Wiedner, D; Wiggers, L; Wilkinson, G; Williams, M P; Williams, M; Wilson, F F; Wishahi, J; Witek, M; Wotton, S A; Wright, S; Wu, S; Wyllie, K; Xie, Y; Xing, F; Xing, Z; Yang, Z; Young, R; Yuan, X; Yushchenko, O; Zangoli, M; Zavertyaev, M; Zhang, F; Zhang, L; Zhang, W C; Zhang, Y; Zhelezov, A; Zhokhov, A; Zhong, L; Zvyagin, A

2013-01-01

First observations and measurements of the branching fractions of the $\\bar{B}_s^0\\to D^+D^-$, $\\bar{B}_s^0\\to D_s^+D^-$ and $\\bar{B}_s^0\\to D^0\\bar{D}^0$ decays are presented using $1.0$~fb$^{-1}$ of data collected by the LHCb experiment. These branching fractions are normalized to those of $\\bar{B}^0\\to D^+D^-$, $B^0\\to D_s^+D^-$ and $B^-\\to D^0D_s^-$, respectively. An excess of events consistent with the decay $\\bar{B}^0\\to D^0\\bar{D}^0$ is also seen, and its branching fraction is measured relative to that of $B^-\\to D^0D_s^-$. Improved measurements of the branching fractions ${\\cal{B}}(\\bar{B}_s^0\\to D_s^+D_s^-)$ and ${\\cal{B}}(B^-\\to D^0D_s^-)$ are reported, each relative to ${\\cal{B}}(B^0\\to D_s^+D^-)$. The ratios of branching fractions are \\begin{align*} {{\\cal{B}}(\\bar{B}_s^0\\to D^+D^-)\\over {\\cal{B}}(\\bar{B}^0\\to D^+D^-)} &= 1.08\\pm 0.20\\pm0.10, \

Search for the Standard Model Higgs Boson in ZH → v$\\bar{v}$b$\\bar{b}$ channel in p$\\bar{p}$ collisions at √s= 1.96 TeV

Energy Technology Data Exchange (ETDEWEB)

Dubey, Abhinav [Univ. of Delhi, New Delhi (India)

2011-01-01

A search for the standard model Higgs boson is performed in 5.2 fb^-1 of p$\\bar{p}$ collisions at p √s = 1.96 TeV, collected with the DØ detector at the Fermilab Tevatron. The final state considered is a pair of b jets with large missing transverse energy, as expected from p$\\bar{p}$→ ZH → v$\\bar{v}$b$\\bar{b}$ production. The search is also sensitive to the WH → ℓvb$\\bar{b}$ channel, where the charged lepton is not identified. Boosted decision trees are used to discriminate signal from background. Good agreement is observed between data and expected backgrounds, and, for a Higgs-boson mass of 115 GeV, a limit is set at 95% C.L. on the cross section multiplied by branching fraction of (p$\\bar{p}$ → (Z/W)H) × (H → b$\\bar{b}$) that is a factor 4.57 expected and 3.73 observed larger than the value expected from the standard model.

Analisis Kinerja Local Area Network Menggunakan Router.

OpenAIRE

Hutahaean, Yosua

2012-01-01

Perangkat internetworking menawarkan komunikasi di antara segmen Local Area Network (LAN). Ada empat tipe utama perangkat internetworking ini: repeater, bridge, router, dan gateway. Perangkat ini dibedakan atas dasar system lapisan Open System Interconnection (OSI) yang digunakan, berfungsi sebagai media komunikasi dari LAN ke LAN. Pada Tugas Akhir ini penulis tertarik untuk membahas analisis kinerja Local Area Network (LAN) menggunakan Router yang menggunakan sistem antrian M/M/1 dimana j...

(Ln-bar, g)-spaces. General relativity over V4-bar - spaces

International Nuclear Information System (INIS)

Manoff, S.; Kolarov, A.; Dimitrov, B.

1998-01-01

The results from the considerations of differentiable manifolds with contravariant and covariant affine connections and metrics are specialized for the case of (L n bar, g)-spaces with metric transport (∇ ξ g = 0 for all ξ is T (M), g ij;k = 0 and f j i = e φ · g j i (the s.c. (pseudo)Riemannian spaces with contravariant and covariant symmetric affine connections). Einstein's theory of gravitation is considered in (pseudo)Riemannian spaces with different (not only by sign) contravariant and covariant affine connections ((V n bar)-spaces, n = 4). The Euler-Lagrange equations and the corresponding energy-momentum tensors (EMT-s) are obtained and compared with the Einstein equations and the EMT-s in V 4 -spaces. The geodesic and autoparallel equations in V 4 bar -spaces are found as different equations in contrast to the case of V 4 -spaces

Antihydrogen Production in $ \\bar{p} $ Z - interaction

CERN Multimedia

2002-01-01

% PS210 \\\\ \\\\ The production of the antihydrogen atom $ \\bar {H}^0 \\equiv \\bar{p}e $ as the simplest atomic bound state of antimatter has been studied. Nine $ \\bar {H}^0 $ have been observed.\\\\ \\\\ The production of $ \\bar {H}^0 $ is predominantly mediated by the two-photon mechanism in the antiproton-nucleus interaction. In principle $ \\bar {H}^0 $ is well suited for investigations of fundamental CPT violation studies under different forces, however, in the present experiment we concentrated on the production of this antimatter object, since so far it never had been observed.

Feasibility and acceptability of a bar-based sexual risk reduction intervention for bar patrons in Tshwane, South Africa.

Science.gov (United States)

Morojele, Neo K; Kitleli, Naledi; Ngako, Kgalabi; Kekwaletswe, Connie T; Nkosi, Sebenzile; Fritz, Katherine; Parry, Charles D H

2014-01-01

Alcohol consumption is a recognised risk factor for HIV infection. Alcohol serving establishments have been identified as appropriate venues in which to deliver HIV prevention interventions. This paper describes experiences and lessons learnt from implementing a combined HIV prevention intervention in bar settings in one city- and one township-based bar in Tshwane, South Africa. The intervention consisted of peer-led and brief intervention counselling sub-components. Thirty-nine bar patrons were recruited and trained, and delivered HIV and alcohol risk reduction activities to their peers as peer interventionists. At the same time, nine counsellors received training and visited the bars weekly to provide brief motivational interviewing counselling, advice, and referrals to the patrons of the bars. A responsible server sub-component that had also been planned was not delivered as it was not feasible to train the staff in the two participating bars. Over the eight-month period the counsellors were approached by and provided advice and counselling for alcohol and sexual risk-related problems to 111 bar patrons. The peer interventionists reported 1323 risk reduction interactions with their fellow bar patrons during the same period. The intervention was overall well received and suggests that bar patrons and servers can accept a myriad of intervention activities to reduce sexual risk behaviour within their drinking settings. However, HIV- and AIDS-related stigma hindered participation in certain intervention activities in some instances. The buy-in that we received from the relevant stakeholders (i.e. bar owners/managers and patrons, and the community at large) was an important contributor to the feasibility and acceptability of the intervention.

Orbits in weak and strong bars

CERN Document Server

Contopoulos, George

1980-01-01

The authors study the plane orbits in simple bar models embedded in an axisymmetric background when the bar density is about 1% (weak), 10% (intermediate) or 100% (strong bar) of the axisymmetric density. Most orbits follow the stable periodic orbits. The basic families of periodic orbits are described. In weak bars with two Inner Lindblad Resonances there is a family of stable orbits extending from the center up to the Outer Lindblad Resonance. This family contains the long period orbits near corotation. Other stable families appear between the Inner Lindblad Resonances, outside the Outer Lindblad Resonance, around corotation (short period orbits) and around the center (retrograde). Some families become unstable or disappear in strong bars. A comparison is made with cases having one or no Inner Lindblad Resonance. (12 refs).

Search for $t\\bar{t}H$ production in the $H \\rightarrow b\\bar{b}$ channel

CERN Document Server

David, Claire; The ATLAS collaboration

2018-01-01

A search for the Standard Model Higgs boson produced in association with top-quark pair, $t\\bar{t}H$, and targeting the $H \\rightarrow b\\bar{b}$ decay mode is presented. The analysis uses 36.1 fb$^{-1}$ of $pp$ collision data at $\\sqrt{s}$ = 13 TeV collected with the ATLAS detector at the Large Hadron Collider in 2015 and 2016. Events must contain either one or two electrons or muons from the top-quark decays and are further categorized according to the multiplicities of jets and jets containing a b-hadron (b-jets). Two-stage multivariate techniques are used to discriminate between signal and the dominant background $t\\bar{t}$ + jets. The ratio of the measured $t\\bar{t}H$ signal cross-section to the Standard Model expectation is found to be $\\mu = 0.84^{+0.64}_{-0.61}$. A value of μ greater than 2.0 is excluded at 95% confidence level. The expected upper limit is $\\mu$ < 1.2 in the absence of a $t\\bar{t}H$ signal.

Application of the Scandpower methodology for the pattern design of the control bars at full power in the cycle 1 of the CNLV

International Nuclear Information System (INIS)

Montes T, J.L.; Perusquia C, R.

1992-05-01

The objective of this report is by means of the methodology provided by Scandpower to design a group of patterns of control bars to full power for the operation of the first operation cycle of the Laguna Verde Unit 1 reactor. (Author)

BAR domain proteins regulate Rho GTPase signaling.

Science.gov (United States)

Aspenström, Pontus

2014-01-01

BAR proteins comprise a heterogeneous group of multi-domain proteins with diverse biological functions. The common denominator is the Bin-Amphiphysin-Rvs (BAR) domain that not only confers targeting to lipid bilayers, but also provides scaffolding to mold lipid membranes into concave or convex surfaces. This function of BAR proteins is an important determinant in the dynamic reconstruction of membrane vesicles, as well as of the plasma membrane. Several BAR proteins function as linkers between cytoskeletal regulation and membrane dynamics. These links are provided by direct interactions between BAR proteins and actin-nucleation-promoting factors of the Wiskott-Aldrich syndrome protein family and the Diaphanous-related formins. The Rho GTPases are key factors for orchestration of this intricate interplay. This review describes how BAR proteins regulate the activity of Rho GTPases, as well as how Rho GTPases regulate the function of BAR proteins. This mutual collaboration is a central factor in the regulation of vital cellular processes, such as cell migration, cytokinesis, intracellular transport, endocytosis, and exocytosis.

N-barN interaction theoretical models

International Nuclear Information System (INIS)

Loiseau, B.

1991-12-01

In the framework of antinucleon-nucleon interaction theoretical models, our present understanding on the N-barN interaction is discussed, either from quark- or/and meson- and baryon-degrees of freedom, by considering the N-barN annihilation into mesons and the N-barN elastic and charge-exchange scattering. (author) 52 refs., 11 figs., 2 tabs

TESTING THEORIES IN BARRED-SPIRAL GALAXIES

International Nuclear Information System (INIS)

Martínez-García, Eric E.

2012-01-01

According to one version of the recently proposed 'manifold' theory that explains the origin of spirals and rings in relation to chaotic orbits, galaxies with stronger bars should have a higher spiral arms pitch angle when compared to galaxies with weaker bars. A subsample of barred-spiral galaxies in the Ohio State University Bright Galaxy Survey was used to analyze the spiral arms pitch angle. These were compared with bar strengths taken from the literature. It was found that the galaxies in which the spiral arms maintain a logarithmic shape for more than 70° seem to corroborate the predicted trend.

Finite Element Analysis of IPS –Empress II Ceramic Bridge Reinforced by Zirconia Bar

Directory of Open Access Journals (Sweden)

Allahyar Geramy

2012-01-01

Full Text Available Objective: The aim of this study was to determine the effect of trenched zirconia bar on the von Mises stress distribution of IPS –Empress II core ceramics.Material and Methods: The three-dimensional model including a three-unit bridge from the second premolar to the second molar was designed. The model was reinforced with zirconia bar (ZB, zirconia bar with vertical trench (VZB, and zirconia bar with horizontal trench (HZB (cross sections of these bars were circular. The model without zirconia bar was designed as the control. The bridges were loaded by 200 N and 500 N on the occlusal surface at the middle of the pontic component, and Von-Mises stresses were evaluated along a defined path.Result: In the connector area, VonMises stress in MPa were approximately identical in the specimens with ZB (at molar connector (MC: 4.75, and at premolar connector (PC: 6.40 and without ZB (MC: 5.50, PC: 6.68, and considerable differences were not recognized. Whereas, Von-Mises stress (MPa in the specimens with horizontal trenched Zirconia bar (HZB (MC: 3.91, PC: 2.44 and Vertical trenched Zirconia bar (VZB (MC: 2.53, PC: 2.56 was decreased considerably.Conclusion: Embeded trenched zirconia bar could reinforce IPS-Empress II at the connector area which is a main failure region in all ceramic fixed partial dentures.

Analisis Penerimaan PAD Pada Dinas Perikanan dan Peternakan Kabupaten Tebo

Directory of Open Access Journals (Sweden)

Eko Purnarianto

2016-06-01

Full Text Available Abstract. This study aims to analyze potential, efficiency, effectivity and contribution of PAD admission at Department of Fishery and Animal Husbandry in Tebo Regencyincluding the strategy establishment to increase its revenue.The analysis used is a potential formula, efficiency ratio, effectivity ratio, contributions ratio and SWOT analysis.The results shows that the potential revenue of retribution slaughterhouse (RPH, the potential sales of livestock, and potential sales fishery product are beyond the current target. The efficiency level of retribution slaughterhouse (RPH and sales of fishery product is poor, but the sales of livestock is very efficient. Effectivity level of livestock and fishery product sales are low, whileretribution slaughterhouses(RPH is not effective regarded to its potential  but in the contrary for its target. Contribution of PAD admission of Fishery and Animal Husbandry Department is very low regarded Tebo Regency PAD. The result of SWOT analysis of retribution slaughter house (RPH admission using WO (Weakness-Opportunity strategy, livestock sales using SO (Strength-Oppurtunity strategy, and fishery product sales using ST (strength-threat strategy. Keywords: Retribution SlaughterHouse (RPH, Sales of Fishery, Livestock Sales, SWOT Analysis   Abstrak. Penelitian ini bertujuan untuk menganalisis potensi, efisiensi, efektivitas dan kontribusi penerimaan PAD pada Dinas Perikanan dan Peternakan Kabupaten Teboserta menetapkan strategi untuk peningkatan penerimaan PAD. Analisis yang digunakan adalah rumus potensi, rasio efisiensi, rasio efektivitas, rasio kontribusi dan analisis SWOT.Hasil penelitian menunjukkan bahwa potensi penerimaan retribusi rumah potong hewan (RPH, potensi penjualan hasil peternakan, potensi  penjualan hasil perikanan lebih besar dari target yang telah ditetapkan. Tingkat efisiensi retribusi RPH dan penjualan hasil perikanan tidak efisien, penjualan hasil peternakan sangat efisien. Tingkat

DYNAMICAL CALCULATIONS OF (K)over-bar AND MULTI-(K)over-bar NUCLEI

Czech Academy of Sciences Publication Activity Database

Gazda, D.; Mareš, Jiří; Friedman, E.; Gal, A.

2009-01-01

Roč. 24, 2-3 (2009), s. 438-441 ISSN 0217-751X. [Conference MESON 2008. Jagiellonian Univ, Cracow, 06.06.2008-10.06.2008] R&D Projects: GA AV ČR IAA100480617 Institutional research plan: CEZ:AV0Z10480505 Keywords : (K)over-bar-nuclear RMF calculations * (K)over-bar-nuclear bound states * kaon condensation Subject RIV: BE - Theoretical Physics Impact factor: 0.941, year: 2009

Anti vibration bars replacement in Vandellos II steam generators

International Nuclear Information System (INIS)

Vinyes, R.; Leal, R.

1994-01-01

C.N. Vandellos II is equipped with three steam generators Westinghouse model F. The number of tubes is 5626 each SG and the material Inconel 600TT. During the first inservice inspection, in 1989, tube wall thickness reductions were observed due to fretting in zones of contact with the tubes anti vibration bars. In the 2 nd shutdown for refueling (1990) all the tubes subject to this type of degradation were inspected by eddy currents, occurring a significative increase in number of tubes affected as well as the quantity of plugged tubes for that reason. Additionally, Westinghouse performed visual inspection and dimensional control of gaps in the tube bundles. Taking in account the results, the replacement with AVBs of new design was decided. AVBs new design is more complex than the original due to the combination of flexible and expandable bars in order to eliminate gaps between tubes an bars an assure proper bundle support. Given that the installation has to be done under water for shielding, all unions are bolted so that no welding is required. Each one of the bars, 333 per SG, is attached to a support structure consisting in 6 retaining plates and 4 bridge plates. (Author)

Ceramic bar impact experiments for improved material model

International Nuclear Information System (INIS)

Brar, N.S.; Proud, W.G.; Rajendran, A.M.

2004-01-01

Ceramic bar-on-bar (uniaxial stress) experiments are performed to extend uniaxial strain deformation states imposed in flyer plate impact experiments. A number of investigators engaged in modeling the bar-on-bar experiments have varying degrees of success in capturing the observed fracture modes in bars and correctly simulating the measured in-situ axial stress or free surface velocity histories. The difficulties encountered are related to uncertainties in understanding the dominant failure mechanisms as a function of different stress states imposed in bar impacts. Free surface velocity of the far end of the target AD998 bar were measured using a VISAR in a series of bar-on-bar impact experiments at nominal impact speeds of 100 m/s, 220 m/s, and 300 m/s. Velocity history data at an impact of 100 m/s show the material response as elastic. At higher impact velocities of 200 m/s and 300 m/s the velocity history data suggest an inelastic material response. A high-speed (Imacon) camera was employed to examine the fracture and failure of impactor and target bars. High speed photographs provide comprehensive data on geometry of damage and failure patterns as a function of time to check the validity of a particular constitutive material model for AD998 alumina used in numerical simulations of fracture and failure of the bars on impact

Influence of the weighing bar size to determine optimal time of biodiesel-glycerol separation by using the buoyancy weighing-bar method

Science.gov (United States)

Tambun, R.; Sibagariang, Y.; Manurung, J.

2018-02-01

The buoyancy weighing-bar method is a novel method in the particle size distribution measurement. This method can measure particle size distributions of the settling particles and floating particles. In this study, the buoyancy weighing-bar method is applied to determine optimal time of biodiesel-glycerol separation. The buoyancy weighing-bar method can be applied to determine the separation time because biodiesel and glycerol have the different densities. The influences of diameter of weighing-bar by using the buoyancy weighing-bar method would be experimentally investigated. The diameters of weighing-bar in this experiment are 8 mm, 10 mm, 15 mm and 20 mm, while the graduated cylinder (diameter : 65 mm) is used as vessel. The samples used in this experiment are the mixture of 95 % of biodiesel and 5 % of glycerol. The data obtained by the buoyancy weighing-bar method are analized by using the gas chromatography to determine the purity of biodiesel. Based on the data obtained, the buoyancy weighing-bar method can be used to detect the separation time of biodiesel-glycerol by using the weighing-bar diameter of 8 mm, 10 mm, 15 mm and 20 mm, but the most accuracy in determination the biodiesel-glycerol separation time is obtained by using the weighing-bar diameter of 20 mm. The biodiesel purity of 97.97 % could be detected at 64 minutes by using the buoyancy weighing-bar method when the weighing-bar diameter of 20 mm is used.

Influence of the control bars pattern on the response of the operation channels of the TRIGA Mark III reactor

International Nuclear Information System (INIS)

Paredes G, L.C.

1991-07-01

The local flow perturbations not generated by movements of bars not planned adequately to operate the reactor to 1 MW of thermal power, are reflected in the independent responses of the operation channels of the same one, find variations average from 17% to 30% for the channel of the power percent and of until 10% for the logarithmic channel. For the case of the lineal and percent power channels, these are between 14% and 46% as maximum when moving some of the bars. These variations can diminish until 5% in the channel of the power percent and until 3% on the average for the logarithmic one, all times when the calculated bars pattern for that irradiation considers that all the bars operate inside the lineal region of its calibration curve with approximately the same reactivity value each one and that during the operation the required reactivity compensations are carried out with the diametrically opposed bar to the irradiation installation used in that experiment. (Author)

Computational package for the dynamic analysis of synchronous generators and their controls; Paquete computacional para el analisis de generadores sincronos y sus controles

Energy Technology Data Exchange (ETDEWEB)

Perez Guillen, Jesus Artemio

1997-12-31

This thesis presents a computational package for the dynamic analysis of synchronous generators and their controls in a machine - infinite bus system. The package is integrated by a graphic interface for Windows environment and several models for the different components of the generation system. The development of the graphic interface was carried out with object oriented programming under Windows environment, available from Borland C++, which generates a group of menus that integrates an environment of interactive and versatile simulation. The package contains mathematical models of third, fourth, fifth and sixth order for synchronous generators of round and salient poles. Several mathematical models for the excitation systems DC1A, AC1A and ST1A, according to the IEEE classification, are included. Models for thermal and hydraulic turbines with governor of speed are also included, as well as a mathematical model for the power system stabilizer and magnetic saturation on synchronous generators. Numerical methods like Euler, Modified Euler and Runge Kutta of second and fourth order are used to solve the characteristics differential equations of the system under study. Algorithms for graphic generation includes phasor diagram, capability and saturation curves for synchronous machine. Computer models are validated and sensitivity analysis is carried out in order to assess the ef ect of type of model for synchronous machine, excitation systems, power system stabilizer, magnetic saturation in the synchronous generator and different numerical methods of integration. The computational package is useful in teaching and research on the dynamic response of synchronous machines and their controls. [Espanol] En este trabajo se presenta el desarrollo de un paquete computacional para el analisis dinamico de generadores sincronos y sus controles en el esquema de una unidad de generacion - bus infinito. El paquete esta integrado por una interfaz grafica para ambiente Windows y un

Bar Formation in Milky Way type Galaxies

Directory of Open Access Journals (Sweden)

Polyachenko E. V.

2016-12-01

Full Text Available Many barred galaxies, possibly including the Milky Way, have cusps in their centers. There is a widespread belief, however, that the usual bar instability, which occurs in bulgeless galaxy models, is impossible for cuspy models because of the presence of the inner Lindblad resonance for any pattern speed. At the same time, there is numerical evidence that the bar instability can form a bar. We analyze this discrepancy by performing accurate and diverse N-body simulations and calculating the normal modes. We show that bar formation in cuspy galaxies can be explained by taking into account the disk thickness. The exponential growth time is moderate (about 250 Myr for typical current disk masses, but it increases considerably (by a factor of two or more if the live halo and bulge are substituted by a rigid halo/bulge potential; the pattern speeds remain almost the same. Normal mode analysis with different disk mass favors a young bar hypothesis, according to which the bar instability has saturated only recently.

Kinematical and dynamical models for barred spiral galaxies

International Nuclear Information System (INIS)

Davoust, E.

1983-01-01

This is a review of published works on the kinematics and dynamics of stellar bars and barred spiral galaxies. The periodic orbits of stars are elongated along the bar and enhance it out to a certain distance from the center. The important role of the interstellar gas is pointed out by the models of gas clouds and flows: the trajectories are also along the bar, but shock waves arise in front of the bar and transient spiral structures appear at its ends. These models reproduce the observed velocity fields fairly well. The investigations of the stability of axisymmetric galactic disks show that they are very unstable with respect to bar shaped perturbations and might explain why two thirds of the known spiral galaxies are barred [fr

Perbandingan Penilaian Saham Dengan Metode Analisis Fundamental Dan Analisis Tehknical, Penggorengan Saham, Serta Keputusan Penilaian Saham Jika Hasil Berlawanan Arah Untuk Kedua Metode Analisis Pada Saham Bakrie Group Untuk Periode 2005- 2009

OpenAIRE

Harwaningrum, Miranti

2016-01-01

Beberapa tahun belakangan ini, dunia investasi mengalami peningkatan. Hal ini dapat terlihat dari data rata-rata perdagangan saham yang dimiliki oleh Bapepam. Salah satu jenis instrumen investasi yang sering diminati oleh investor adalah saham. Apabila dibandingkan dengan obligasi, saham memiliki expected return yang lebih tinggi. Namun, saham memiliki resiko yang lebih tinggi bila dibandingkan dengan obligasi. Untuk melakukan penilaian saham ada dua analisis yang dapat dilakukan, yaitu funda...

Dynamics and genetic fuzzy neural network vibration control design of a smart flexible four-bar linkage mechanism

International Nuclear Information System (INIS)

Rong Bao; Rui Xiaoting; Tao Ling

2012-01-01

In this paper, a dynamic modeling method and an active vibration control scheme for a smart flexible four-bar linkage mechanism featuring piezoelectric actuators and strain gauge sensors are presented. The dynamics of this smart mechanism is described by the Discrete Time Transfer Matrix Method of Multibody System (MS-DTTMM). Then a nonlinear fuzzy neural network control is employed to suppress the vibration of this smart mechanism. For improving the dynamic performance of the fuzzy neural network, a genetic algorithm based on the MS-DTTMM is designed offline to tune the initial parameters of the fuzzy neural network. The MS-DTTMM avoids the global dynamics equations of the system, which results in the matrices involved are always very small, so the computational efficiency of the dynamic analysis and control system optimization can be greatly improved. Formulations of the method as well as a numerical simulation are given to demonstrate the proposed dynamic method and control scheme.

ANALISIS MODEL PREDIKSI AWAL MUSIM HUJAN DI SULAWESI SELATAN

Directory of Open Access Journals (Sweden)

Alimatul Rahim

2016-03-01

Full Text Available Model prediksi awal musim hujan merupakan salah satu kunci yang dapat digunakan untuk mengurangi resiko kegagalan panen padi yang disebabkan oleh faktor iklim di provinsi Sulawesi Selatan. Model prediksi awal musim hujan dibangun  dengan menggunakan data curah hujan observasi Sulawesi Selatan dan anomali suhu muka laut di kawasan Pasifik dan perairan Sulawesi. Pada studi ini dilakukan analisis pemilihan stasiun hujan observasi, penentuan awal musim hujan, analisis komponen utama dan pengelompokan, analisis korelasi awal musim hujan terhadap anomali suhu muka laut, pembangunan model untuk prediksi awal musimhujan dan verifikasi model.Hasil analisis awal musim hujan menunjukkan setiap stasiun hujan mempunyai perbedaan awal musim hujan dengan rata-rata jatuh pada Julian Date (JD ke-348 (14 Desember. Berdasarkan hasil analisis PCA dan cluster, diperoleh bahwa di Sulawesi Selatan terbagi menjadi 3 cluster wilayah. Cluster 1 mempunyai pola hujan lokal, sedangkan cluster 2 dan 3 mempunyai pola hujan monsun. Pada peta korelasi antara awal musim hujan di Sulawesi Selatan dan anomali suhu muka laut menunjukkan bahwa terdapat korelasi nyata(r≥0.5 antara kawasan Pasifik dan Laut Sulawesi pada cluster 1 dan 2 pada bulan Juni Juli Agustus September(JJAS. Sedangkan pada cluster 3, korelasi nyata hanya pada bulan Juni di perairan Sulawesi. Model prediksi AMH terbaik, pada cluster 2 terdapat di domain prediktor kawasan pasifik dengan nilai r=0.82, sedangkan pada cluster 1 dan 3, terdapat di domain perairan Sulawesi dengan nilai r=0.78 dan r-0.48. Verifikasi model terpilih pada cluster 3 mempunyai RMSE = 3, sedangkan cluster 1 dan 2, nilai RMSE berturut-turut sebesar 16 dan 29.   Model prediction of rainy season onset is one of the keys to reduce the risk of paddy haverst failure because of climate factor in South Sulawesi province. The model prediction for rainy season onset was build using rainfall data in South Sulawesi and SST anomaly in Pacific Ocean and

Measurement of the cross section ratio $\\sigma_\\mathrm{t \\bar{t} b \\bar{b}} / \\sigma_\\mathrm{t \\bar{t} jj }$ in pp collisions at $\\sqrt{s}$ = 8 TeV

CERN Document Server

Khachatryan, Vardan; Tumasyan, Armen; Adam, Wolfgang; Bergauer, Thomas; Dragicevic, Marko; Erö, Janos; Fabjan, Christian; Friedl, Markus; Fruehwirth, Rudolf; Ghete, Vasile Mihai; Hartl, Christian; Hörmann, Natascha; Hrubec, Josef; Jeitler, Manfred; Kiesenhofer, Wolfgang; Knünz, Valentin; Krammer, Manfred; Krätschmer, Ilse; Liko, Dietrich; Mikulec, Ivan; Rabady, Dinyar; Rahbaran, Babak; Rohringer, Herbert; Schöfbeck, Robert; Strauss, Josef; Taurok, Anton; Treberer-Treberspurg, Wolfgang; Waltenberger, Wolfgang; Wulz, Claudia-Elisabeth; Mossolov, Vladimir; Shumeiko, Nikolai; Suarez Gonzalez, Juan; Alderweireldt, Sara; Bansal, Monika; Bansal, Sunil; Cornelis, Tom; De Wolf, Eddi A; Janssen, Xavier; Knutsson, Albert; Luyckx, Sten; Ochesanu, Silvia; Roland, Benoit; Rougny, Romain; Van De Klundert, Merijn; Van Haevermaet, Hans; Van Mechelen, Pierre; Van Remortel, Nick; Van Spilbeeck, Alex; Blekman, Freya; Blyweert, Stijn; D'Hondt, Jorgen; Daci, Nadir; Heracleous, Natalie; Keaveney, James; Lowette, Steven; Maes, Michael; Olbrechts, Annik; Python, Quentin; Strom, Derek; Tavernier, Stefaan; Van Doninck, Walter; Van Mulders, Petra; Van Onsem, Gerrit Patrick; Villella, Ilaria; Caillol, Cécile; Clerbaux, Barbara; De Lentdecker, Gilles; Dobur, Didar; Favart, Laurent; Gay, Arnaud; Grebenyuk, Anastasia; Léonard, Alexandre; Mohammadi, Abdollah; Perniè, Luca; Reis, Thomas; Seva, Tomislav; Thomas, Laurent; Vander Velde, Catherine; Vanlaer, Pascal; Wang, Jian; Adler, Volker; Beernaert, Kelly; Benucci, Leonardo; Cimmino, Anna; Costantini, Silvia; Crucy, Shannon; Dildick, Sven; Fagot, Alexis; Garcia, Guillaume; Mccartin, Joseph; Ocampo Rios, Alberto Andres; Ryckbosch, Dirk; Salva Diblen, Sinem; Sigamani, Michael; Strobbe, Nadja; Thyssen, Filip; Tytgat, Michael; Yazgan, Efe; Zaganidis, Nicolas; Basegmez, Suzan; Beluffi, Camille; Bruno, Giacomo; Castello, Roberto; Caudron, Adrien; Ceard, Ludivine; Da Silveira, Gustavo Gil; Delaere, Christophe; Du Pree, Tristan; Favart, Denis; Forthomme, Laurent; Giammanco, Andrea; Hollar, Jonathan; Jez, Pavel; Komm, Matthias; Lemaitre, Vincent; Nuttens, Claude; Pagano, Davide; Perrini, Lucia; Pin, Arnaud; Piotrzkowski, Krzysztof; Popov, Andrey; Quertenmont, Loic; Selvaggi, Michele; Vidal Marono, Miguel; Vizan Garcia, Jesus Manuel; Beliy, Nikita; Caebergs, Thierry; Daubie, Evelyne; Hammad, Gregory Habib; Aldá Júnior, Walter Luiz; Alves, Gilvan; Brito, Lucas; Correa Martins Junior, Marcos; Dos Reis Martins, Thiago; Mora Herrera, Clemencia; Pol, Maria Elena; Carvalho, Wagner; Chinellato, Jose; Custódio, Analu; Melo Da Costa, Eliza; De Jesus Damiao, Dilson; De Oliveira Martins, Carley; Fonseca De Souza, Sandro; Malbouisson, Helena; Matos Figueiredo, Diego; Mundim, Luiz; Nogima, Helio; Prado Da Silva, Wanda Lucia; Santaolalla, Javier; Santoro, Alberto; Sznajder, Andre; Tonelli Manganote, Edmilson José; Vilela Pereira, Antonio; Bernardes, Cesar Augusto; Dogra, Sunil; Tomei, Thiago; De Moraes Gregores, Eduardo; Mercadante, Pedro G; Novaes, Sergio F; Padula, Sandra; Aleksandrov, Aleksandar; Genchev, Vladimir; Iaydjiev, Plamen; Marinov, Andrey; Piperov, Stefan; Rodozov, Mircho; Stoykova, Stefka; Sultanov, Georgi; Tcholakov, Vanio; Vutova, Mariana; Dimitrov, Anton; Glushkov, Ivan; Hadjiiska, Roumyana; Kozhuharov, Venelin; Litov, Leander; Pavlov, Borislav; Petkov, Peicho; Bian, Jian-Guo; Chen, Guo-Ming; Chen, He-Sheng; Chen, Mingshui; Du, Ran; Jiang, Chun-Hua; Liang, Song; Plestina, Roko; Tao, Junquan; Wang, Xianyou; Wang, Zheng; Asawatangtrakuldee, Chayanit; Ban, Yong; Guo, Yifei; Li, Qiang; Li, Wenbo; Liu, Shuai; Mao, Yajun; Qian, Si-Jin; Wang, Dayong; Zhang, Linlin; Zou, Wei; Avila, Carlos; Chaparro Sierra, Luisa Fernanda; Florez, Carlos; Gomez, Juan Pablo; Gomez Moreno, Bernardo; Sanabria, Juan Carlos; Godinovic, Nikola; Lelas, Damir; Polic, Dunja; Puljak, Ivica; Antunovic, Zeljko; Kovac, Marko; Brigljevic, Vuko; Kadija, Kreso; Luetic, Jelena; Mekterovic, Darko; Sudic, Lucija; Attikis, Alexandros; Mavromanolakis, Georgios; Mousa, Jehad; Nicolaou, Charalambos; Ptochos, Fotios; Razis, Panos A; Bodlak, Martin; Finger, Miroslav; Finger Jr, Michael; Assran, Yasser; Ellithi Kamel, Ali; Mahmoud, Mohammed; Radi, Amr; Kadastik, Mario; Murumaa, Marion; Raidal, Martti; Tiko, Andres; Eerola, Paula; Fedi, Giacomo; Voutilainen, Mikko; Härkönen, Jaakko; Karimäki, Veikko; Kinnunen, Ritva; Kortelainen, Matti J; Lampén, Tapio; Lassila-Perini, Kati; Lehti, Sami; Lindén, Tomas; Luukka, Panja-Riina; Mäenpää, Teppo; Peltola, Timo; Tuominen, Eija; Tuominiemi, Jorma; Tuovinen, Esa; Wendland, Lauri; Talvitie, Joonas; Tuuva, Tuure; Besancon, Marc; Couderc, Fabrice; Dejardin, Marc; Denegri, Daniel; Fabbro, Bernard; Faure, Jean-Louis; Favaro, Carlotta; Ferri, Federico; Ganjour, Serguei; Givernaud, Alain; Gras, Philippe; Hamel de Monchenault, Gautier; Jarry, Patrick; Locci, Elizabeth; Malcles, Julie; Rander, John; Rosowsky, André; Titov, Maksym; Baffioni, Stephanie; Beaudette, Florian; Busson, Philippe; Charlot, Claude; Dahms, Torsten; Dalchenko, Mykhailo; Dobrzynski, Ludwik; Filipovic, Nicolas; Florent, Alice; Granier de Cassagnac, Raphael; Mastrolorenzo, Luca; Miné, Philippe; Mironov, Camelia; Naranjo, Ivo Nicolas; Nguyen, Matthew; Ochando, Christophe; Paganini, Pascal; Regnard, Simon; Salerno, Roberto; Sauvan, Jean-Baptiste; Sirois, Yves; Veelken, Christian; Yilmaz, Yetkin; Zabi, Alexandre; Agram, Jean-Laurent; Andrea, Jeremy; Aubin, Alexandre; Bloch, Daniel; Brom, Jean-Marie; Chabert, Eric Christian; Collard, Caroline; Conte, Eric; Fontaine, Jean-Charles; Gelé, Denis; Goerlach, Ulrich; Goetzmann, Christophe; Le Bihan, Anne-Catherine; Van Hove, Pierre; Gadrat, Sébastien; Beauceron, Stephanie; Beaupere, Nicolas; Boudoul, Gaelle; Bouvier, Elvire; Brochet, Sébastien; Carrillo Montoya, Camilo Andres; Chasserat, Julien; Chierici, Roberto; Contardo, Didier; Depasse, Pierre; El Mamouni, Houmani; Fan, Jiawei; Fay, Jean; Gascon, Susan; Gouzevitch, Maxime; Ille, Bernard; Kurca, Tibor; Lethuillier, Morgan; Mirabito, Laurent; Perries, Stephane; Ruiz Alvarez, José David; Sabes, David; Sgandurra, Louis; Sordini, Viola; Vander Donckt, Muriel; Verdier, Patrice; Viret, Sébastien; Xiao, Hong; Tsamalaidze, Zviad; Autermann, Christian; Beranek, Sarah; Bontenackels, Michael; Edelhoff, Matthias; Feld, Lutz; Hindrichs, Otto; Klein, Katja; Ostapchuk, Andrey; Perieanu, Adrian; Raupach, Frank; Sammet, Jan; Schael, Stefan; Weber, Hendrik; Wittmer, Bruno; Zhukov, Valery; Ata, Metin; Brodski, Michael; Dietz-Laursonn, Erik; Duchardt, Deborah; Erdmann, Martin; Fischer, Robert; Güth, Andreas; Hebbeker, Thomas; Heidemann, Carsten; Hoepfner, Kerstin; Klingebiel, Dennis; Knutzen, Simon; Kreuzer, Peter; Merschmeyer, Markus; Meyer, Arnd; Millet, Philipp; Olschewski, Mark; Padeken, Klaas; Papacz, Paul; Reithler, Hans; Schmitz, Stefan Antonius; Sonnenschein, Lars; Teyssier, Daniel; Thüer, Sebastian; Weber, Martin; Cherepanov, Vladimir; Erdogan, Yusuf; Flügge, Günter; Geenen, Heiko; Geisler, Matthias; Haj Ahmad, Wael; Heister, Arno; Hoehle, Felix; Kargoll, Bastian; Kress, Thomas; Kuessel, Yvonne; Lingemann, Joschka; Nowack, Andreas; Nugent, Ian Michael; Perchalla, Lars; Pooth, Oliver; Stahl, Achim; Asin, Ivan; Bartosik, Nazar; Behr, Joerg; Behrenhoff, Wolf; Behrens, Ulf; Bell, Alan James; Bergholz, Matthias; Bethani, Agni; Borras, Kerstin; Burgmeier, Armin; Cakir, Altan; Calligaris, Luigi; Campbell, Alan; Choudhury, Somnath; Costanza, Francesco; Diez Pardos, Carmen; Dooling, Samantha; Dorland, Tyler; Eckerlin, Guenter; Eckstein, Doris; Eichhorn, Thomas; Flucke, Gero; Garay Garcia, Jasone; Geiser, Achim; Gunnellini, Paolo; Hauk, Johannes; Hempel, Maria; Horton, Dean; Jung, Hannes; Kalogeropoulos, Alexis; Kasemann, Matthias; Katsas, Panagiotis; Kieseler, Jan; Kleinwort, Claus; Krücker, Dirk; Lange, Wolfgang; Leonard, Jessica; Lipka, Katerina; Lobanov, Artur; Lohmann, Wolfgang; Lutz, Benjamin; Mankel, Rainer; Marfin, Ihar; Melzer-Pellmann, Isabell-Alissandra; Meyer, Andreas Bernhard; Mittag, Gregor; Mnich, Joachim; Mussgiller, Andreas; Naumann-Emme, Sebastian; Nayak, Aruna; Novgorodova, Olga; Nowak, Friederike; Ntomari, Eleni; Perrey, Hanno; Pitzl, Daniel; Placakyte, Ringaile; Raspereza, Alexei; Ribeiro Cipriano, Pedro M; Ron, Elias; Sahin, Mehmet Özgür; Salfeld-Nebgen, Jakob; Saxena, Pooja; Schmidt, Ringo; Schoerner-Sadenius, Thomas; Schröder, Matthias; Seitz, Claudia; Spannagel, Simon; Vargas Trevino, Andrea Del Rocio; Walsh, Roberval; Wissing, Christoph; Aldaya Martin, Maria; Blobel, Volker; Centis Vignali, Matteo; Draeger, Arne-Rasmus; Erfle, Joachim; Garutti, Erika; Goebel, Kristin; Görner, Martin; Haller, Johannes; Hoffmann, Malte; Höing, Rebekka Sophie; Kirschenmann, Henning; Klanner, Robert; Kogler, Roman; Lange, Jörn; Lapsien, Tobias; Lenz, Teresa; Marchesini, Ivan; Ott, Jochen; Peiffer, Thomas; Pietsch, Niklas; Poehlsen, Jennifer; Pöhlsen, Thomas; Rathjens, Denis; Sander, Christian; Schettler, Hannes; Schleper, Peter; Schlieckau, Eike; Schmidt, Alexander; Seidel, Markus; Sola, Valentina; Stadie, Hartmut; Steinbrück, Georg; Troendle, Daniel; Usai, Emanuele; Vanelderen, Lukas; Barth, Christian; Baus, Colin; Berger, Joram; Böser, Christian; Butz, Erik; Chwalek, Thorsten; De Boer, Wim; Descroix, Alexis; Dierlamm, Alexander; Feindt, Michael; Frensch, Felix; Giffels, Manuel; Hartmann, Frank; Hauth, Thomas; Husemann, Ulrich; Katkov, Igor; Kornmayer, Andreas; Kuznetsova, Ekaterina; Lobelle Pardo, Patricia; Mozer, Matthias Ulrich; Müller, Thomas; Nürnberg, Andreas; Quast, Gunter; Rabbertz, Klaus; Ratnikov, Fedor; Röcker, Steffen; Simonis, Hans-Jürgen; Stober, Fred-Markus Helmut; Ulrich, Ralf; Wagner-Kuhr, Jeannine; Wayand, Stefan; Weiler, Thomas; Wolf, Roger; Anagnostou, Georgios; Daskalakis, Georgios; Geralis, Theodoros; Giakoumopoulou, Viktoria Athina; Kyriakis, Aristotelis; Loukas, Demetrios; Markou, Athanasios; Markou, Christos; Psallidas, Andreas; Topsis-Giotis, Iasonas; Agapitos, Antonis; Kesisoglou, Stilianos; Panagiotou, Apostolos; Saoulidou, Niki; Stiliaris, Efstathios; Aslanoglou, Xenofon; Evangelou, Ioannis; Flouris, Giannis; Foudas, Costas; Kokkas, Panagiotis; Manthos, Nikolaos; Papadopoulos, Ioannis; Paradas, Evangelos; Bencze, Gyorgy; Hajdu, Csaba; Hidas, Pàl; Horvath, Dezso; Sikler, Ferenc; Veszpremi, Viktor; Vesztergombi, Gyorgy; Zsigmond, Anna Julia; Beni, Noemi; Czellar, Sandor; Karancsi, János; Molnar, Jozsef; Palinkas, Jozsef; Szillasi, Zoltan; Raics, Peter; Trocsanyi, Zoltan Laszlo; Ujvari, Balazs; Swain, Sanjay Kumar; Beri, Suman Bala; Bhatnagar, Vipin; Gupta, Ruchi; Bhawandeep, Bhawandeep; Kalsi, Amandeep Kaur; Kaur, Manjit; Mittal, Monika; Nishu, Nishu; Singh, Jasbir; Kumar, Ashok; Kumar, Arun; Ahuja, Sudha; Bhardwaj, Ashutosh; Choudhary, Brajesh C; Kumar, Ajay; Malhotra, Shivali; Naimuddin, Md; Ranjan, Kirti; Sharma, Varun; Banerjee, Sunanda; Bhattacharya, Satyaki; Chatterjee, Kalyanmoy; Dutta, Suchandra; Gomber, Bhawna; Jain, Sandhya; Jain, Shilpi; Khurana, Raman; Modak, Atanu; Mukherjee, Swagata; Roy, Debarati; Sarkar, Subir; Sharan, Manoj; Abdulsalam, Abdulla; Dutta, Dipanwita; Kailas, Swaminathan; Kumar, Vineet; Mohanty, Ajit Kumar; Pant, Lalit Mohan; Shukla, Prashant; Topkar, Anita; Aziz, Tariq; Banerjee, Sudeshna; Bhowmik, Sandeep; Chatterjee, Rajdeep Mohan; Dewanjee, Ram Krishna; Dugad, Shashikant; Ganguly, Sanmay; Ghosh, Saranya; Guchait, Monoranjan; Gurtu, Atul; Kole, Gouranga; Kumar, Sanjeev; Maity, Manas; Majumder, Gobinda; Mazumdar, Kajari; Mohanty, Gagan Bihari; Parida, Bibhuti; Sudhakar, Katta; Wickramage, Nadeesha; Bakhshiansohi, Hamed; Behnamian, Hadi; Etesami, Seyed Mohsen; Fahim, Ali; Goldouzian, Reza; Jafari, Abideh; Khakzad, Mohsen; Mohammadi Najafabadi, Mojtaba; Naseri, Mohsen; Paktinat Mehdiabadi, Saeid; Rezaei Hosseinabadi, Ferdos; Safarzadeh, Batool; Zeinali, Maryam; Felcini, Marta; Grunewald, Martin; Abbrescia, Marcello; Barbone, Lucia; Calabria, Cesare; Chhibra, Simranjit Singh; Colaleo, Anna; Creanza, Donato; De Filippis, Nicola; De Palma, Mauro; Fiore, Luigi; Iaselli, Giuseppe; Maggi, Giorgio; Maggi, Marcello; My, Salvatore; Nuzzo, Salvatore; Pompili, Alexis; Pugliese, Gabriella; Radogna, Raffaella; Selvaggi, Giovanna; Silvestris, Lucia; Singh, Gurpreet; Venditti, Rosamaria; Verwilligen, Piet; Zito, Giuseppe; Abbiendi, Giovanni; Benvenuti, Alberto; Bonacorsi, Daniele; Braibant-Giacomelli, Sylvie; Brigliadori, Luca; Campanini, Renato; Capiluppi, Paolo; Castro, Andrea; Cavallo, Francesca Romana; Codispoti, Giuseppe; Cuffiani, Marco; Dallavalle, Gaetano-Marco; Fabbri, Fabrizio; Fanfani, Alessandra; Fasanella, Daniele; Giacomelli, Paolo; Grandi, Claudio; Guiducci, Luigi; Marcellini, Stefano; Masetti, Gianni; Montanari, Alessandro; Navarria, Francesco; Perrotta, Andrea; Primavera, Federica; Rossi, Antonio; Rovelli, Tiziano; Siroli, Gian Piero; Tosi, Nicolò; Travaglini, Riccardo; Albergo, Sebastiano; Cappello, Gigi; Chiorboli, Massimiliano; Costa, Salvatore; Giordano, Ferdinando; Potenza, Renato; Tricomi, Alessia; Tuve, Cristina; Barbagli, Giuseppe; Ciulli, Vitaliano; Civinini, Carlo; D'Alessandro, Raffaello; Focardi, Ettore; Gallo, Elisabetta; Gonzi, Sandro; Gori, Valentina; Lenzi, Piergiulio; Meschini, Marco; Paoletti, Simone; Sguazzoni, Giacomo; Tropiano, Antonio; Benussi, Luigi; Bianco, Stefano; Fabbri, Franco; Piccolo, Davide; Ferro, Fabrizio; Lo Vetere, Maurizio; Robutti, Enrico; Tosi, Silvano; Dinardo, Mauro Emanuele; Fiorendi, Sara; Gennai, Simone; Gerosa, Raffaele; Ghezzi, Alessio; Govoni, Pietro; Lucchini, Marco Toliman; Malvezzi, Sandra; Manzoni, Riccardo Andrea; Martelli, Arabella; Marzocchi, Badder; Menasce, Dario; Moroni, Luigi; Paganoni, Marco; Pedrini, Daniele; Ragazzi, Stefano; Redaelli, Nicola; Tabarelli de Fatis, Tommaso; Buontempo, Salvatore; Cavallo, Nicola; Di Guida, Salvatore; Fabozzi, Francesco; Iorio, Alberto Orso Maria; Lista, Luca; Meola, Sabino; Merola, Mario; Paolucci, Pierluigi; Azzi, Patrizia; Bacchetta, Nicola; Bisello, Dario; Branca, Antonio; Carlin, Roberto; Checchia, Paolo; Dall'Osso, Martino; Dorigo, Tommaso; Fanzago, Federica; Galanti, Mario; Gasparini, Fabrizio; Gasparini, Ugo; Gonella, Franco; Gozzelino, Andrea; Kanishchev, Konstantin; Lacaprara, Stefano; Margoni, Martino; Meneguzzo, Anna Teresa; Pazzini, Jacopo; Pozzobon, Nicola; Ronchese, Paolo; Simonetto, Franco; Torassa, Ezio; Tosi, Mia; Zotto, Pierluigi; Zucchetta, Alberto; Zumerle, Gianni; Gabusi, Michele; Ratti, Sergio P; Riccardi, Cristina; Salvini, Paola; Vitulo, Paolo; Biasini, Maurizio; Bilei, Gian Mario; Ciangottini, Diego; Fanò, Livio; Lariccia, Paolo; Mantovani, Giancarlo; Menichelli, Mauro; Romeo, Francesco; Saha, Anirban; Santocchia, Attilio; Spiezia, Aniello; Androsov, Konstantin; Azzurri, Paolo; Bagliesi, Giuseppe; Bernardini, Jacopo; Boccali, Tommaso; Broccolo, Giuseppe; Castaldi, Rino; Ciocci, Maria Agnese; Dell'Orso, Roberto; Donato, Silvio; Fiori, Francesco; Foà, Lorenzo; Giassi, Alessandro; Grippo, Maria Teresa; Ligabue, Franco; Lomtadze, Teimuraz; Martini, Luca; Messineo, Alberto; Moon, Chang-Seong; Palla, Fabrizio; Rizzi, Andrea; Savoy-Navarro, Aurore; Serban, Alin Titus; Spagnolo, Paolo; Squillacioti, Paola; Tenchini, Roberto; Tonelli, Guido; Venturi, Andrea; Verdini, Piero Giorgio; Vernieri, Caterina; Barone, Luciano; Cavallari, Francesca; D'imperio, Giulia; Del Re, Daniele; Diemoz, Marcella; Grassi, Marco; Jorda, Clara; Longo, Egidio; Margaroli, Fabrizio; Meridiani, Paolo; Micheli, Francesco; Nourbakhsh, Shervin; Organtini, Giovanni; Paramatti, Riccardo; Rahatlou, Shahram; Rovelli, Chiara; Santanastasio, Francesco; Soffi, Livia; Traczyk, Piotr; Amapane, Nicola; Arcidiacono, Roberta; Argiro, Stefano; Arneodo, Michele; Bellan, Riccardo; Biino, Cristina; Cartiglia, Nicolo; Casasso, Stefano; Costa, Marco; Degano, Alessandro; Demaria, Natale; Finco, Linda; Mariotti, Chiara; Maselli, Silvia; Migliore, Ernesto; Monaco, Vincenzo; Musich, Marco; Obertino, Maria Margherita; Ortona, Giacomo; Pacher, Luca; Pastrone, Nadia; Pelliccioni, Mario; Pinna Angioni, Gian Luca; Potenza, Alberto; Romero, Alessandra; Ruspa, Marta; Sacchi, Roberto; Solano, Ada; Staiano, Amedeo; Trapani, Pier Paolo; Belforte, Stefano; Candelise, Vieri; Casarsa, Massimo; Cossutti, Fabio; Della Ricca, Giuseppe; Gobbo, Benigno; La Licata, Chiara; Marone, Matteo; Montanino, Damiana; Schizzi, Andrea; Umer, Tomo; Zanetti, Anna; Chang, Sunghyun; Kropivnitskaya, Anna; Nam, Soon-Kwon; Kim, Dong Hee; Kim, Gui Nyun; Kim, Min Suk; Kong, Dae Jung; Lee, Sangeun; Oh, Young Do; Park, Hyangkyu; Sakharov, Alexandre; Son, Dong-Chul; Kim, Tae Jeong; Kim, Jae Yool; Song, Sanghyeon; Choi, Suyong; Gyun, Dooyeon; Hong, Byung-Sik; Jo, Mihee; Kim, Hyunchul; Kim, Yongsun; Lee, Byounghoon; Lee, Kyong Sei; Park, Sung Keun; Roh, Youn; Choi, Minkyoo; Kim, Ji Hyun; Park, Inkyu; Park, Sangnam; Ryu, Geonmo; Ryu, Min Sang; Choi, Young-Il; Choi, Young Kyu; Goh, Junghwan; Kim, Donghyun; Kwon, Eunhyang; Lee, Jongseok; Seo, Hyunkwan; Yu, Intae; Juodagalvis, Andrius; Komaragiri, Jyothsna Rani; Md Ali, Mohd Adli Bin; Castilla-Valdez, Heriberto; De La Cruz-Burelo, Eduard; Heredia-de La Cruz, Ivan; Lopez-Fernandez, Ricardo; Sánchez Hernández, Alberto; Carrillo Moreno, Salvador; Vazquez Valencia, Fabiola; Pedraza, Isabel; Salazar Ibarguen, Humberto Antonio; Casimiro Linares, Edgar; Morelos Pineda, Antonio; Krofcheck, David; Butler, Philip H; Reucroft, Steve; Ahmad, Ashfaq; Ahmad, Muhammad; Hassan, Qamar; Hoorani, Hafeez R; Khalid, Shoaib; Khan, Wajid Ali; Khurshid, Taimoor; Shah, Mehar Ali; Shoaib, Muhammad; Bialkowska, Helena; Bluj, Michal; Boimska, Bożena; Frueboes, Tomasz; Górski, Maciej; Kazana, Malgorzata; Nawrocki, Krzysztof; Romanowska-Rybinska, Katarzyna; Szleper, Michal; Zalewski, Piotr; Brona, Grzegorz; Bunkowski, Karol; Cwiok, Mikolaj; Dominik, Wojciech; Doroba, Krzysztof; Kalinowski, Artur; Konecki, Marcin; Krolikowski, Jan; Misiura, Maciej; Olszewski, Michał; Wolszczak, Weronika; Bargassa, Pedrame; Beirão Da Cruz E Silva, Cristóvão; Faccioli, Pietro; Ferreira Parracho, Pedro Guilherme; Gallinaro, Michele; Nguyen, Federico; Rodrigues Antunes, Joao; Seixas, Joao; Varela, Joao; Vischia, Pietro; Afanasiev, Serguei; Bunin, Pavel; Gavrilenko, Mikhail; Golutvin, Igor; Gorbunov, Ilya; Kamenev, Alexey; Karjavin, Vladimir; Konoplyanikov, Viktor; Lanev, Alexander; Malakhov, Alexander; Matveev, Viktor; Moisenz, Petr; Palichik, Vladimir; Perelygin, Victor; Shmatov, Sergey; Skatchkov, Nikolai; Smirnov, Vitaly; Zarubin, Anatoli; Golovtsov, Victor; Ivanov, Yury; Kim, Victor; Levchenko, Petr; Murzin, Victor; Oreshkin, Vadim; Smirnov, Igor; Sulimov, Valentin; Uvarov, Lev; Vavilov, Sergey; Vorobyev, Alexey; Vorobyev, Andrey; Andreev, Yuri; Dermenev, Alexander; Gninenko, Sergei; Golubev, Nikolai; Kirsanov, Mikhail; Krasnikov, Nikolai; Pashenkov, Anatoli; Tlisov, Danila; Toropin, Alexander; Epshteyn, Vladimir; Gavrilov, Vladimir; Lychkovskaya, Natalia; Popov, Vladimir; Safronov, Grigory; Semenov, Sergey; Spiridonov, Alexander; Stolin, Viatcheslav; Vlasov, Evgueni; Zhokin, Alexander; Andreev, Vladimir; Azarkin, Maksim; Dremin, Igor; Kirakosyan, Martin; Leonidov, Andrey; Mesyats, Gennady; Rusakov, Sergey V; Vinogradov, Alexey; Belyaev, Andrey; Boos, Edouard; Bunichev, Viacheslav; Dubinin, Mikhail; Dudko, Lev; Gribushin, Andrey; Klyukhin, Vyacheslav; Kodolova, Olga; Lokhtin, Igor; Obraztsov, Stepan; Perfilov, Maxim; Savrin, Viktor; Snigirev, Alexander; Azhgirey, Igor; Bayshev, Igor; Bitioukov, Sergei; Kachanov, Vassili; Kalinin, Alexey; Konstantinov, Dmitri; Krychkine, Victor; Petrov, Vladimir; Ryutin, Roman; Sobol, Andrei; Tourtchanovitch, Leonid; Troshin, Sergey; Tyurin, Nikolay; Uzunian, Andrey; Volkov, Alexey; Adzic, Petar; Ekmedzic, Marko; Milosevic, Jovan; Rekovic, Vladimir; Alcaraz Maestre, Juan; Battilana, Carlo; Calvo, Enrique; Cerrada, Marcos; Chamizo Llatas, Maria; Colino, Nicanor; De La Cruz, Begona; Delgado Peris, Antonio; Domínguez Vázquez, Daniel; Escalante Del Valle, Alberto; Fernandez Bedoya, Cristina; Fernández Ramos, Juan Pablo; Flix, Jose; Fouz, Maria Cruz; Garcia-Abia, Pablo; Gonzalez Lopez, Oscar; Goy Lopez, Silvia; Hernandez, Jose M; Josa, Maria Isabel; Merino, Gonzalo; Navarro De Martino, Eduardo; Pérez-Calero Yzquierdo, Antonio María; Puerta Pelayo, Jesus; Quintario Olmeda, Adrián; Redondo, Ignacio; Romero, Luciano; Senghi Soares, Mara; Albajar, Carmen; de Trocóniz, Jorge F; Missiroli, Marino; Moran, Dermot; Brun, Hugues; Cuevas, Javier; Fernandez Menendez, Javier; Folgueras, Santiago; Gonzalez Caballero, Isidro; Lloret Iglesias, Lara; Brochero Cifuentes, Javier Andres; Cabrillo, Iban Jose; Calderon, Alicia; Duarte Campderros, Jordi; Fernandez, Marcos; Gomez, Gervasio; Graziano, Alberto; Lopez Virto, Amparo; Marco, Jesus; Marco, Rafael; Martinez Rivero, Celso; Matorras, Francisco; Munoz Sanchez, Francisca Javiela; Piedra Gomez, Jonatan; Rodrigo, Teresa; Rodríguez-Marrero, Ana Yaiza; Ruiz-Jimeno, Alberto; Scodellaro, Luca; Vila, Ivan; Vilar Cortabitarte, Rocio; Abbaneo, Duccio; Auffray, Etiennette; Auzinger, Georg; Bachtis, Michail; Baillon, Paul; Ball, Austin; Barney, David; Benaglia, Andrea; Bendavid, Joshua; Benhabib, Lamia; Benitez, Jose F; Bernet, Colin; Bianchi, Giovanni; Bloch, Philippe; Bocci, Andrea; Bonato, Alessio; Bondu, Olivier; Botta, Cristina; Breuker, Horst; Camporesi, Tiziano; Cerminara, Gianluca; Colafranceschi, Stefano; D'Alfonso, Mariarosaria; D'Enterria, David; Dabrowski, Anne; David Tinoco Mendes, Andre; De Guio, Federico; De Roeck, Albert; De Visscher, Simon; Dobson, Marc; Dordevic, Milos; Dorney, Brian; Dupont-Sagorin, Niels; Elliott-Peisert, Anna; Eugster, Jürg; Franzoni, Giovanni; Funk, Wolfgang; Gigi, Dominique; Gill, Karl; Giordano, Domenico; Girone, Maria; Glege, Frank; Guida, Roberto; Gundacker, Stefan; Guthoff, Moritz; Hammer, Josef; Hansen, Magnus; Harris, Philip; Hegeman, Jeroen; Innocente, Vincenzo; Janot, Patrick; Kousouris, Konstantinos; Krajczar, Krisztian; Lecoq, Paul; Lourenco, Carlos; Magini, Nicolo; Malgeri, Luca; Mannelli, Marcello; Marrouche, Jad; Masetti, Lorenzo; Meijers, Frans; Mersi, Stefano; Meschi, Emilio; Moortgat, Filip; Morovic, Srecko; Mulders, Martijn; Musella, Pasquale; Orsini, Luciano; Pape, Luc; Perez, Emmanuelle; Perrozzi, Luca; Petrilli, Achille; Petrucciani, Giovanni; Pfeiffer, Andreas; Pierini, Maurizio; Pimiä, Martti; Piparo, Danilo; Plagge, Michael; Racz, Attila; Rolandi, Gigi; Rovere, Marco; Sakulin, Hannes; Schäfer, Christoph; Schwick, Christoph; Sharma, Archana; Siegrist, Patrice; Silva, Pedro; Simon, Michal; Sphicas, Paraskevas; Spiga, Daniele; Steggemann, Jan; Stieger, Benjamin; Stoye, Markus; Takahashi, Yuta; Treille, Daniel; Tsirou, Andromachi; Veres, Gabor Istvan; Vlimant, Jean-Roch; Wardle, Nicholas; Wöhri, Hermine Katharina; Wollny, Heiner; Zeuner, Wolfram Dietrich; Bertl, Willi; Deiters, Konrad; Erdmann, Wolfram; Horisberger, Roland; Ingram, Quentin; Kaestli, Hans-Christian; Kotlinski, Danek; Langenegger, Urs; Renker, Dieter; Rohe, Tilman; Bachmair, Felix; Bäni, Lukas; Bianchini, Lorenzo; Bortignon, Pierluigi; Buchmann, Marco-Andrea; Casal, Bruno; Chanon, Nicolas; Deisher, Amanda; Dissertori, Günther; Dittmar, Michael; Donegà, Mauro; Dünser, Marc; Eller, Philipp; Grab, Christoph; Hits, Dmitry; Lustermann, Werner; Mangano, Boris; Marini, Andrea Carlo; Martinez Ruiz del Arbol, Pablo; Meister, Daniel; Mohr, Niklas; Nägeli, Christoph; Nessi-Tedaldi, Francesca; Pandolfi, Francesco; Pauss, Felicitas; Peruzzi, Marco; Quittnat, Milena; Rebane, Liis; Rossini, Marco; Starodumov, Andrei; Takahashi, Maiko; Theofilatos, Konstantinos; Wallny, Rainer; Weber, Hannsjoerg Artur; Amsler, Claude; Canelli, Maria Florencia; Chiochia, Vincenzo; De Cosa, Annapaola; Hinzmann, Andreas; Hreus, Tomas; Kilminster, Benjamin; Lange, Clemens; Millan Mejias, Barbara; Ngadiuba, Jennifer; Robmann, Peter; Ronga, Frederic Jean; Taroni, Silvia; Verzetti, Mauro; Yang, Yong; Cardaci, Marco; Chen, Kuan-Hsin; Ferro, Cristina; Kuo, Chia-Ming; Lin, Willis; Lu, Yun-Ju; Volpe, Roberta; Yu, Shin-Shan; Chang, Paoti; Chang, You-Hao; Chang, Yu-Wei; Chao, Yuan; Chen, Kai-Feng; Chen, Po-Hsun; Dietz, Charles; Grundler, Ulysses; Hou, George Wei-Shu; Kao, Kai-Yi; Lei, Yeong-Jyi; Liu, Yueh-Feng; Lu, Rong-Shyang; Majumder, Devdatta; Petrakou, Eleni; Tzeng, Yeng-Ming; Wilken, Rachel; Asavapibhop, Burin; Srimanobhas, Norraphat; Suwonjandee, Narumon; Adiguzel, Aytul; Bakirci, Mustafa Numan; Cerci, Salim; Dozen, Candan; Dumanoglu, Isa; Eskut, Eda; Girgis, Semiray; Gokbulut, Gul; Gurpinar, Emine; Hos, Ilknur; Kangal, Evrim Ersin; Kayis Topaksu, Aysel; Onengut, Gulsen; Ozdemir, Kadri; Ozturk, Sertac; Polatoz, Ayse; Sogut, Kenan; Sunar Cerci, Deniz; Tali, Bayram; Topakli, Huseyin; Vergili, Mehmet; Akin, Ilina Vasileva; Bilin, Bugra; Bilmis, Selcuk; Gamsizkan, Halil; Karapinar, Guler; Ocalan, Kadir; Sekmen, Sezen; Surat, Ugur Emrah; Yalvac, Metin; Zeyrek, Mehmet; Gülmez, Erhan; Isildak, Bora; Kaya, Mithat; Kaya, Ozlem; Cankocak, Kerem; Vardarlı, Fuat Ilkehan; Levchuk, Leonid; Sorokin, Pavel; Brooke, James John; Clement, Emyr; Cussans, David; Flacher, Henning; Frazier, Robert; Goldstein, Joel; Grimes, Mark; Heath, Greg P; Heath, Helen F; Jacob, Jeson; Kreczko, Lukasz; Lucas, Chris; Meng, Zhaoxia; Newbold, Dave M; Paramesvaran, Sudarshan; Poll, Anthony; Senkin, Sergey; Smith, Vincent J; Williams, Thomas; Bell, Ken W; Belyaev, Alexander; Brew, Christopher; Brown, Robert M; Cockerill, David JA; Coughlan, John A; Harder, Kristian; Harper, Sam; Olaiya, Emmanuel; Petyt, David; Shepherd-Themistocleous, Claire; Thea, Alessandro; Tomalin, Ian R; Womersley, William John; Worm, Steven; Baber, Mark; Bainbridge, Robert; Buchmuller, Oliver; Burton, Darren; Colling, David; Cripps, Nicholas; Cutajar, Michael; Dauncey, Paul; Davies, Gavin; Della Negra, Michel; Dunne, Patrick; Ferguson, William; Fulcher, Jonathan; Futyan, David; Gilbert, Andrew; Hall, Geoffrey; Iles, Gregory; Jarvis, Martyn; Karapostoli, Georgia; Kenzie, Matthew; Lane, Rebecca; Lucas, Robyn; Lyons, Louis; Magnan, Anne-Marie; Malik, Sarah; Mathias, Bryn; Nash, Jordan; Nikitenko, Alexander; Pela, Joao; Pesaresi, Mark; Petridis, Konstantinos; Raymond, David Mark; Rogerson, Samuel; Rose, Andrew; Seez, Christopher; Sharp, Peter; Tapper, Alexander; Vazquez Acosta, Monica; Virdee, Tejinder; Zenz, Seth Conrad; Cole, Joanne; Hobson, Peter R; Khan, Akram; Kyberd, Paul; Leggat, Duncan; Leslie, Dawn; Martin, William; Reid, Ivan; Symonds, Philip; Teodorescu, Liliana; Turner, Mark; Dittmann, Jay; Hatakeyama, Kenichi; Kasmi, Azeddine; Liu, Hongxuan; Scarborough, Tara; Charaf, Otman; Cooper, Seth; Henderson, Conor; Rumerio, Paolo; Avetisyan, Aram; Bose, Tulika; Fantasia, Cory; Lawson, Philip; Richardson, Clint; Rohlf, James; Sperka, David; St John, Jason; Sulak, Lawrence; Alimena, Juliette; Berry, Edmund; Bhattacharya, Saptaparna; Christopher, Grant; Cutts, David; Demiragli, Zeynep; Dhingra, Nitish; Ferapontov, Alexey; Garabedian, Alex; Heintz, Ulrich; Kukartsev, Gennadiy; Laird, Edward; Landsberg, Greg; Luk, Michael; Narain, Meenakshi; Segala, Michael; Sinthuprasith, Tutanon; Speer, Thomas; Swanson, Joshua; Breedon, Richard; Breto, Guillermo; Calderon De La Barca Sanchez, Manuel; Chauhan, Sushil; Chertok, Maxwell; Conway, John; Conway, Rylan; Cox, Peter Timothy; Erbacher, Robin; Gardner, Michael; Ko, Winston; Lander, Richard; Miceli, Tia; Mulhearn, Michael; Pellett, Dave; Pilot, Justin; Ricci-Tam, Francesca; Searle, Matthew; Shalhout, Shalhout; Smith, John; Squires, Michael; Stolp, Dustin; Tripathi, Mani; Wilbur, Scott; Yohay, Rachel; Cousins, Robert; Everaerts, Pieter; Farrell, Chris; Hauser, Jay; Ignatenko, Mikhail; Rakness, Gregory; Takasugi, Eric; Valuev, Vyacheslav; Weber, Matthias; Babb, John; Burt, Kira; Clare, Robert; Ellison, John Anthony; Gary, J William; Hanson, Gail; Heilman, Jesse; Ivova Rikova, Mirena; Jandir, Pawandeep; Kennedy, Elizabeth; Lacroix, Florent; Liu, Hongliang; Long, Owen Rosser; Luthra, Arun; Malberti, Martina; Nguyen, Harold; Olmedo Negrete, Manuel; Shrinivas, Amithabh; Sumowidagdo, Suharyo; Wimpenny, Stephen; Andrews, Warren; Branson, James G; Cerati, Giuseppe Benedetto; Cittolin, Sergio; D'Agnolo, Raffaele Tito; Evans, David; Holzner, André; Kelley, Ryan; Klein, Daniel; Lebourgeois, Matthew; Letts, James; Macneill, Ian; Olivito, Dominick; Padhi, Sanjay; Palmer, Christopher; Pieri, Marco; Sani, Matteo; Sharma, Vivek; Simon, Sean; Sudano, Elizabeth; Tadel, Matevz; Tu, Yanjun; Vartak, Adish; Welke, Charles; Würthwein, Frank; Yagil, Avraham; Yoo, Jaehyeok; Barge, Derek; Bradmiller-Feld, John; Campagnari, Claudio; Danielson, Thomas; Dishaw, Adam; Flowers, Kristen; Franco Sevilla, Manuel; Geffert, Paul; George, Christopher; Golf, Frank; Gouskos, Loukas; Incandela, Joe; Justus, Christopher; Mccoll, Nickolas; Richman, Jeffrey; Stuart, David; To, Wing; West, Christopher; Apresyan, Artur; Bornheim, Adolf; Bunn, Julian; Chen, Yi; Di Marco, Emanuele; Duarte, Javier; Mott, Alexander; Newman, Harvey B; Pena, Cristian; Rogan, Christopher; Spiropulu, Maria; Timciuc, Vladlen; Wilkinson, Richard; Xie, Si; Zhu, Ren-Yuan; Azzolini, Virginia; Calamba, Aristotle; Carlson, Benjamin; Ferguson, Thomas; Iiyama, Yutaro; Paulini, Manfred; Russ, James; Vogel, Helmut; Vorobiev, Igor; Cumalat, John Perry; Ford, William T; Gaz, Alessandro; Luiggi Lopez, Eduardo; Nauenberg, Uriel; Smith, James; Stenson, Kevin; Ulmer, Keith; Wagner, Stephen Robert; Alexander, James; Chatterjee, Avishek; Chu, Jennifer; Dittmer, Susan; Eggert, Nicholas; Mirman, Nathan; Nicolas Kaufman, Gala; Patterson, Juliet Ritchie; Ryd, Anders; Salvati, Emmanuele; Skinnari, Louise; Sun, Werner; Teo, Wee Don; Thom, Julia; Thompson, Joshua; Tucker, Jordan; Weng, Yao; Winstrom, Lucas; Wittich, Peter; Winn, Dave; Abdullin, Salavat; Albrow, Michael; Anderson, Jacob; Apollinari, Giorgio; Bauerdick, Lothar AT; Beretvas, Andrew; Berryhill, Jeffrey; Bhat, Pushpalatha C; Burkett, Kevin; Butler, Joel Nathan; Cheung, Harry; Chlebana, Frank; Cihangir, Selcuk; Elvira, Victor Daniel; Fisk, Ian; Freeman, Jim; Gao, Yanyan; Gottschalk, Erik; Gray, Lindsey; Green, Dan; Grünendahl, Stefan; Gutsche, Oliver; Hanlon, Jim; Hare, Daryl; Harris, Robert M; Hirschauer, James; Hooberman, Benjamin; Jindariani, Sergo; Johnson, Marvin; Joshi, Umesh; Kaadze, Ketino; Klima, Boaz; Kreis, Benjamin; Kwan, Simon; Linacre, Jacob; Lincoln, Don; Lipton, Ron; Liu, Tiehui; Lykken, Joseph; Maeshima, Kaori; Marraffino, John Michael; Martinez Outschoorn, Verena Ingrid; Maruyama, Sho; Mason, David; McBride, Patricia; Mishra, Kalanand; Mrenna, Stephen; Musienko, Yuri; Nahn, Steve; Newman-Holmes, Catherine; O'Dell, Vivian; Prokofyev, Oleg; Sexton-Kennedy, Elizabeth; Sharma, Seema; Soha, Aron; Spalding, William J; Spiegel, Leonard; Taylor, Lucas; Tkaczyk, Slawek; Tran, Nhan Viet; Uplegger, Lorenzo; Vaandering, Eric Wayne; Vidal, Richard; Whitbeck, Andrew; Whitmore, Juliana; Yang, Fan; Acosta, Darin; Avery, Paul; Bourilkov, Dimitri; Carver, Matthew; Cheng, Tongguang; Curry, David; Das, Souvik; De Gruttola, Michele; Di Giovanni, Gian Piero; Field, Richard D; Fisher, Matthew; Furic, Ivan-Kresimir; Hugon, Justin; Konigsberg, Jacobo; Korytov, Andrey; Kypreos, Theodore; Low, Jia Fu; Matchev, Konstantin; Milenovic, Predrag; Mitselmakher, Guenakh; Muniz, Lana; Rinkevicius, Aurelijus; Shchutska, Lesya; Snowball, Matthew; Yelton, John; Zakaria, Mohammed; Hewamanage, Samantha; Linn, Stephan; Markowitz, Pete; Martinez, German; Rodriguez, Jorge Luis; Adams, Todd; Askew, Andrew; Bochenek, Joseph; Diamond, Brendan; Haas, Jeff; Hagopian, Sharon; Hagopian, Vasken; Johnson, Kurtis F; Prosper, Harrison; Veeraraghavan, Venkatesh; Weinberg, Marc; Baarmand, Marc M; Hohlmann, Marcus; Kalakhety, Himali; Yumiceva, Francisco; Adams, Mark Raymond; Apanasevich, Leonard; Bazterra, Victor Eduardo; Berry, Douglas; Betts, Russell Richard; Bucinskaite, Inga; Cavanaugh, Richard; Evdokimov, Olga; Gauthier, Lucie; Gerber, Cecilia Elena; Hofman, David Jonathan; Khalatyan, Samvel; Kurt, Pelin; Moon, Dong Ho; O'Brien, Christine; Silkworth, Christopher; Turner, Paul; Varelas, Nikos; Albayrak, Elif Asli; Bilki, Burak; Clarida, Warren; Dilsiz, Kamuran; Duru, Firdevs; Haytmyradov, Maksat; Merlo, Jean-Pierre; Mermerkaya, Hamit; Mestvirishvili, Alexi; Moeller, Anthony; Nachtman, Jane; Ogul, Hasan; Onel, Yasar; Ozok, Ferhat; Penzo, Aldo; Rahmat, Rahmat; Sen, Sercan; Tan, Ping; Tiras, Emrah; Wetzel, James; Yetkin, Taylan; Yi, Kai; Barnett, Bruce Arnold; Blumenfeld, Barry; Bolognesi, Sara; Fehling, David; Gritsan, Andrei; Maksimovic, Petar; Martin, Christopher; Swartz, Morris; Baringer, Philip; Bean, Alice; Benelli, Gabriele; Bruner, Christopher; Kenny III, Raymond Patrick; Malek, Magdalena; Murray, Michael; Noonan, Daniel; Sanders, Stephen; Sekaric, Jadranka; Stringer, Robert; Wang, Quan; Wood, Jeffrey Scott; Barfuss, Anne-Fleur; Chakaberia, Irakli; Ivanov, Andrew; Khalil, Sadia; Makouski, Mikhail; Maravin, Yurii; Saini, Lovedeep Kaur; Shrestha, Shruti; Skhirtladze, Nikoloz; Svintradze, Irakli; Gronberg, Jeffrey; Lange, David; Rebassoo, Finn; Wright, Douglas; Baden, Drew; Belloni, Alberto; Calvert, Brian; Eno, Sarah Catherine; Gomez, Jaime; Hadley, Nicholas John; Kellogg, Richard G; Kolberg, Ted; Lu, Ying; Marionneau, Matthieu; Mignerey, Alice; Pedro, Kevin; Skuja, Andris; Tonjes, Marguerite; Tonwar, Suresh C; Apyan, Aram; Barbieri, Richard; Bauer, Gerry; Busza, Wit; Cali, Ivan Amos; Chan, Matthew; Di Matteo, Leonardo; Dutta, Valentina; Gomez Ceballos, Guillelmo; Goncharov, Maxim; Gulhan, Doga; Klute, Markus; Lai, Yue Shi; Lee, Yen-Jie; Levin, Andrew; Luckey, Paul David; Ma, Teng; Paus, Christoph; Ralph, Duncan; Roland, Christof; Roland, Gunther; Stephans, George; Stöckli, Fabian; Sumorok, Konstanty; Velicanu, Dragos; Veverka, Jan; Wyslouch, Bolek; Yang, Mingming; Zanetti, Marco; Zhukova, Victoria; Dahmes, Bryan; Gude, Alexander; Kao, Shih-Chuan; Klapoetke, Kevin; Kubota, Yuichi; Mans, Jeremy; Pastika, Nathaniel; Rusack, Roger; Singovsky, Alexander; Tambe, Norbert; Turkewitz, Jared; Acosta, John Gabriel; Oliveros, Sandra; Avdeeva, Ekaterina; Bloom, Kenneth; Bose, Suvadeep; Claes, Daniel R; Dominguez, Aaron; Gonzalez Suarez, Rebeca; Keller, Jason; Knowlton, Dan; Kravchenko, Ilya; Lazo-Flores, Jose; Malik, Sudhir; Meier, Frank; Snow, Gregory R; Dolen, James; Godshalk, Andrew; Iashvili, Ia; Kharchilava, Avto; Kumar, Ashish; Rappoccio, Salvatore; Alverson, George; Barberis, Emanuela; Baumgartel, Darin; Chasco, Matthew; Haley, Joseph; Massironi, Andrea; Morse, David Michael; Nash, David; Orimoto, Toyoko; Trocino, Daniele; Wang, Ren-Jie; Wood, Darien; Zhang, Jinzhong; Hahn, Kristan Allan; Kubik, Andrew; Mucia, Nicholas; Odell, Nathaniel; Pollack, Brian; Pozdnyakov, Andrey; Schmitt, Michael Henry; Stoynev, Stoyan; Sung, Kevin; Velasco, Mayda; Won, Steven; Brinkerhoff, Andrew; Chan, Kwok Ming; Drozdetskiy, Alexey; Hildreth, Michael; Jessop, Colin; Karmgard, Daniel John; Kellams, Nathan; Lannon, Kevin; Luo, Wuming; Lynch, Sean; Marinelli, Nancy; Pearson, Tessa; Planer, Michael; Ruchti, Randy; Valls, Nil; Wayne, Mitchell; Wolf, Matthias; Woodard, Anna; Antonelli, Louis; Brinson, Jessica; Bylsma, Ben; Durkin, Lloyd Stanley; Flowers, Sean; Hill, Christopher; Hughes, Richard; Kotov, Khristian; Ling, Ta-Yung; Puigh, Darren; Rodenburg, Marissa; Smith, Geoffrey; Winer, Brian L; Wolfe, Homer; Wulsin, Howard Wells; Driga, Olga; Elmer, Peter; Hebda, Philip; Hunt, Adam; Koay, Sue Ann; Lujan, Paul; Marlow, Daniel; Medvedeva, Tatiana; Mooney, Michael; Olsen, James; Piroué, Pierre; Quan, Xiaohang; Saka, Halil; Stickland, David; Tully, Christopher; Werner, Jeremy Scott; Zuranski, Andrzej; Brownson, Eric; Mendez, Hector; Ramirez Vargas, Juan Eduardo; Barnes, Virgil E; Benedetti, Daniele; Bolla, Gino; Bortoletto, Daniela; De Mattia, Marco; Hu, Zhen; Jha, Manoj; Jones, Matthew; Jung, Kurt; Kress, Matthew; Leonardo, Nuno; Lopes Pegna, David; Maroussov, Vassili; Merkel, Petra; Miller, David Harry; Neumeister, Norbert; Radburn-Smith, Benjamin Charles; Shi, Xin; Shipsey, Ian; Silvers, David; Svyatkovskiy, Alexey; Wang, Fuqiang; Xie, Wei; Xu, Lingshan; Yoo, Hwi Dong; Zablocki, Jakub; Zheng, Yu; Parashar, Neeti; Stupak, John; Adair, Antony; Akgun, Bora; Ecklund, Karl Matthew; Geurts, Frank JM; Li, Wei; Michlin, Benjamin; Padley, Brian Paul; Redjimi, Radia; Roberts, Jay; Zabel, James; Betchart, Burton; Bodek, Arie; Covarelli, Roberto; de Barbaro, Pawel; Demina, Regina; Eshaq, Yossof; Ferbel, Thomas; Garcia-Bellido, Aran; Goldenzweig, Pablo; Han, Jiyeon; Harel, Amnon; Khukhunaishvili, Aleko; Petrillo, Gianluca; Vishnevskiy, Dmitry; Ciesielski, Robert; Demortier, Luc; Goulianos, Konstantin; Lungu, Gheorghe; Mesropian, Christina; Arora, Sanjay; Barker, Anthony; Chou, John Paul; Contreras-Campana, Christian; Contreras-Campana, Emmanuel; Duggan, Daniel; Ferencek, Dinko; Gershtein, Yuri; Gray, Richard; Halkiadakis, Eva; Hidas, Dean; Kaplan, Steven; Lath, Amitabh; Panwalkar, Shruti; Park, Michael; Patel, Rishi; Salur, Sevil; Schnetzer, Steve; Somalwar, Sunil; Stone, Robert; Thomas, Scott; Thomassen, Peter; Walker, Matthew; Rose, Keith; Spanier, Stefan; York, Andrew; Bouhali, Othmane; Castaneda Hernandez, Alfredo; Eusebi, Ricardo; Flanagan, Will; Gilmore, Jason; Kamon, Teruki; Khotilovich, Vadim; Krutelyov, Vyacheslav; Montalvo, Roy; Osipenkov, Ilya; Pakhotin, Yuriy; Perloff, Alexx; Roe, Jeffrey; Rose, Anthony; Safonov, Alexei; Sakuma, Tai; Suarez, Indara; Tatarinov, Aysen; Akchurin, Nural; Cowden, Christopher; Damgov, Jordan; Dragoiu, Cosmin; Dudero, Phillip Russell; Faulkner, James; Kovitanggoon, Kittikul; Kunori, Shuichi; Lee, Sung Won; Libeiro, Terence; Volobouev, Igor; Appelt, Eric; Delannoy, Andrés G; Greene, Senta; Gurrola, Alfredo; Johns, Willard; Maguire, Charles; Mao, Yaxian; Melo, Andrew; Sharma, Monika; Sheldon, Paul; Snook, Benjamin; Tuo, Shengquan; Velkovska, Julia; Arenton, Michael Wayne; Boutle, Sarah; Cox, Bradley; Francis, Brian; Goodell, Joseph; Hirosky, Robert; Ledovskoy, Alexander; Li, Hengne; Lin, Chuanzhe; Neu, Christopher; Wood, John; Clarke, Christopher; Harr, Robert; Karchin, Paul Edmund; Kottachchi Kankanamge Don, Chamath; Lamichhane, Pramod; Sturdy, Jared; Belknap, Donald; Carlsmith, Duncan; Cepeda, Maria; Dasu, Sridhara; Dodd, Laura; Duric, Senka; Friis, Evan; Hall-Wilton, Richard; Herndon, Matthew; Hervé, Alain; Klabbers, Pamela; Lanaro, Armando; Lazaridis, Christos; Levine, Aaron; Loveless, Richard; Mohapatra, Ajit; Ojalvo, Isabel; Perry, Thomas; Pierro, Giuseppe Antonio; Polese, Giovanni; Ross, Ian; Sarangi, Tapas; Savin, Alexander; Smith, Wesley H; Taylor, Devin; Vuosalo, Carl; Woods, Nathaniel

2015-04-30

The first measurement of the cross section ratio $\\sigma_\\mathrm{ t \\bar{t} b \\bar{b}} / \\sigma_\\mathrm{ t \\bar{t} jj }$ is presented using a data sample corresponding to an integrated luminosity of 19.6 fb$^{-1}$ collected in pp collisions at $\\sqrt{s}$ = 8 TeV with the CMS detector at the LHC. Events with two leptons ($\\mathrm{e}$ or $\\mu$) and four reconstructed jets, including two identified as b quark jets, in the final state are selected. The ratio is determined for a minimum jet transverse momentum $p_\\mathrm{T}$ of both 20 and 40 GeV/$c$. The measured ratio is 0.022 $\\pm$ 0.003 (stat) $\\pm$ 0.005 (syst) for $p_\\mathrm{T}$ greater than 20 GeV/$c$. The absolute cross sections $\\sigma_\\mathrm{ t \\bar{t} b \\bar{b}}$ and $\\sigma_\\mathrm{ t \\bar{t} jj }$ are also measured. The measured ratio for $p_\\mathrm{T}$ greater than 40 GeV/$c$ is compatible with a theoretical quantum chromodynamics calculation at next-to-leading order.

Characterizing bars in low surface brightness disc galaxies

Science.gov (United States)

Peters, Wesley; Kuzio de Naray, Rachel

2018-05-01

In this paper, we use B-band, I-band, and 3.6 μm azimuthal light profiles of four low surface brightness galaxies (LSBs; UGC 628, F568-1, F568-3, F563-V2) to characterize three bar parameters: length, strength, and corotation radius. We employ three techniques to measure the radius of the bars, including a new method using the azimuthal light profiles. We find comparable bar radii between the I-band and 3.6 μm for all four galaxies when using our azimuthal light profile method, and that our bar lengths are comparable to those in high surface brightness galaxies (HSBs). In addition, we find the bar strengths for our galaxies to be smaller than those for HSBs. Finally, we use Fourier transforms of the B-band, I-band, and 3.6 μm images to characterize the bars as either `fast' or `slow' by measuring the corotation radius via phase profiles. When using the B- and I-band phase crossings, we find three of our galaxies have faster than expected relative bar pattern speeds for galaxies expected to be embedded in centrally dense cold dark matter haloes. When using the B-band and 3.6 μm phase crossings, we find more ambiguous results, although the relative bar pattern speeds are still faster than expected. Since we find a very slow bar in F563-V2, we are confident that we are able to differentiate between fast and slow bars. Finally, we find no relation between bar strength and relative bar pattern speed when comparing our LSBs to HSBs.

La financial education nella regione Puglia: analisi e prospettive di intervento

OpenAIRE

A. Garzoni; V. Nastasi

2010-01-01

Analisi del contesto e delle principali tematiche di financial education affrontate a livello internazionale e nazionale, valutazione delle opportunità e degli aspetti critici, il progetto pilota nella regione Puglia e le nuove idee di progetto da realizzare

Membrane Localization is Critical for Activation of the PICK1 BAR Domain

Science.gov (United States)

Madsen, Kenneth L.; Eriksen, Jacob; Milan-Lobo, Laura; Han, Daniel S.; Niv, Masha Y.; Ammendrup-Johnsen, Ina; Henriksen, Ulla; Bhatia, Vikram K.; Stamou, Dimitrios; Sitte, Harald H.; McMahon, Harvey T.; Weinstein, Harel; Gether, Ulrik

2013-01-01

The PSD-95/Discs-large/ZO-1 homology (PDZ) domain protein, protein interacting with C kinase 1 (PICK1) contains a C-terminal Bin/amphiphysin/Rvs (BAR) domain mediating recognition of curved membranes; however, the molecular mechanisms controlling the activity of this domain are poorly understood. In agreement with negative regulation of the BAR domain by the N-terminal PDZ domain, PICK1 distributed evenly in the cytoplasm, whereas truncation of the PDZ domain caused BAR domain-dependent redistribution to clusters colocalizing with markers of recycling endosomal compartments. A similar clustering was observed both upon truncation of a short putative α-helical segment in the linker between the PDZ and the BAR domains and upon coexpression of PICK1 with a transmembrane PDZ ligand, including the alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptor GluR2 subunit, the GluR2 C-terminus transferred to the single transmembrane protein Tac or the dopamine transporter C-terminus transferred to Tac. In contrast, transfer of the GluR2 C-terminus to cyan fluorescent protein, a cytosolic protein, did not elicit BAR domain-dependent clustering. Instead, localizing PICK1 to the membrane by introducing an N-terminal myristoylation site produced BAR domain-dependent, but ligand-independent, PICK1 clustering. The data support that in the absence of PDZ ligand, the PICK1 BAR domain is inhibited through a PDZ domain-dependent and linker-dependent mechanism. Moreover, they suggest that unmasking of the BAR domain’s membrane-binding capacity is not a consequence of ligand binding to the PDZ domain per se but results from, and coincides with, recruitment of PICK1 to a membrane compartment. PMID:18466293

A Measurement of the production cross section of t$\\bar{t}$ in p$\\bar{p}$ collisions at √s = 1.96 TeV using secondary vertex b-tagging.

Energy Technology Data Exchange (ETDEWEB)

Bachacou, Henri [Univ. of California, Berkeley, CA (United States)

2004-12-01

A measurement of the t$\\bar{t}$ pair production cross section is presented using 162 pb ^-1 of data collected by the CDF experiment during Run II at the Tevatron. t$\\bar{t}$} events in the lepton+jets channel are isolated by identifying electrons and muons, reconstructing jets and transverse missing energy, and identifying b jets with a secondary vertex tagging algorithm. The efficiency of the algorithm is measured in a control sample using a novel technique that is less dependent on the simulation. For a top quark mass of 175 GeV/c² , a cross section of σ_t$\\bar{t}$ = 5.6$+1.2\\atop{-1.1}$(stat.)$+0.9\\atop{-0.6}$(syst.)pb is measured.

Text Mining Untuk Analisis Sentimen Review Film Menggunakan Algoritma K-Means

Directory of Open Access Journals (Sweden)

Setyo Budi

2017-02-01

Full Text Available Kemudahan manusia didalam menggunakan website mengakibatkan bertambahnya dokumen teks yang berupa pendapat dan informasi. Dalam waktu yang lama dokumen teks akan bertambah besar. Text mining merupakan salah satu teknik yang digunakan untuk menggali kumpulan dokumen text sehingga dapat diambil intisarinya. Ada beberapa algoritma yang di gunakan untuk penggalian dokumen untuk analisis sentimen, salah satunya adalah K-Means. Didalam penelitian ini algoritma yang digunakan adalah K-Means. Hasil penelitian menunjukkan bahwa akurasi K-Means dengan dataset digunakan 300 positif dan 300 negatif  akurasinya 57.83%,  700 dokumen positif dan 700  negatif akurasinya 56.71%%, 1000 dokumen positif dan 1000  negatif akurasinya 50.40%%. Dari hasil pengujian disimpulkan bahwa semakin besar dataset yang digunakan semakin rendah akurasi K-Means.   Kata Kunci : Text Mining, Analisis Sentimen, K-Means, Review Film 

Analisis Nilai Perusahaan pada Implementasi Program Kepemilikan Saham pada Karyawan/Manajemen

Directory of Open Access Journals (Sweden)

Dwitya Aribawa

2016-12-01

  Penelitian ini bertujuan menganalisis economic value added (EVA sebelum dan sesudah implementasi program kepemilikan saham pada karyawan/ manajemen dengan objek penelitian ini adalah perusahaan publik yang menggunakan kebijakan ESOP/MSOP sebagai sarana benefit/incentive berupa pembagian sebagian saham untuk karyawan/ manajemen. Variabel yang digunakan sebagai indikator nilai perusahaan adalah EVA. Nilai EVA dianggap sebagai indikator yang kompleks dan mempertimbangkan faktor resiko (beta dari perusahaan. Perusahaan yang dianalisis adalah perusahaan yang listing di Bursa Efek Indonesia. Terdapat 17 perusahaan yang layak untuk dilakukan analisis berdasarkan kriteria yang ditentukan peneliti. Pengumpulan dan data dianalisis secara pooling, hal ini melihat dari tidak dibedakannya perusahaan berdasarkan industri (multi industri. Paired sample test digunakan untuk menguji hipotesis pada penelitian dan sebelumnya dilakukan uji normalitas data. Hasil analisis bahwa hasil perbandingan rata-rata EVA sebelum dan sesudah implementasi program kepemilikan saham pada karyawan/manajemen terdapat perbedaan yag signifikan.

Fault bars in bird feathers: mechanisms, and ecological and evolutionary causes and consequences.

Science.gov (United States)

Jovani, Roger; Rohwer, Sievert

2017-05-01

Fault bars are narrow malformations in feathers oriented almost perpendicular to the rachis where the feather vein and even the rachis may break. Breaks in the barbs and barbules result in small pieces of the feather vein being lost, while breaks in the rachis result in loss of the distal portion of the feather. Here, we provide a comprehensive review of 74 papers on fault bar formation in hopes of providing a clearer approach to their study. First, we review the evidence that the propensity to develop fault bars is modified by natural selection. Given that fault bars persist in the face of survival costs, we conclude that they must be an unfortunate consequence of some alternative adaptation that outweighs the fitness costs of fault bars. Second, we summarize evidence that the development of fault bars is triggered by psychological stress such as that of handling or predation attempts, and that they persist because the sudden contractions of the muscles in the feather follicle that control fright moults also causes the development of fault bars in growing feathers. Third, we review external and physiological (e.g. corticosterone) agents that may affect the likelihood that an acute stress will result in a growing feather exhibiting a fault bar. These modifying factors have often been treated as fundamental causes in the earlier literature on fault bars. Fourth, we then use this classification to propose a tentative model where fault bars of different severity (from light to severe) are the outcome of the interaction between the propensity to produce fault bars (which differs between species, individuals and feather follicles within individuals) and the intensity of the perturbation. This model helps to explain contradictory results in the literature, to identify gaps in our knowledge, and to suggest further studies. Lastly, we discuss ways in which better understanding of fault bars can inform us about other aspects of avian evolutionary ecology, such as the

21 CFR 610.67 - Bar code label requirements.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Bar code label requirements. 610.67 Section 610.67...) BIOLOGICS GENERAL BIOLOGICAL PRODUCTS STANDARDS Labeling Standards § 610.67 Bar code label requirements. Biological products must comply with the bar code requirements at § 201.25 of this chapter. However, the bar...

Magnetic fields in barred galaxies I. The atlas

CERN Document Server

Beck, R; Ehle, M; Harnett, J I; Haynes, R F; Shukurov, A M; Sokoloff, D D; Thierbach, M

2002-01-01

The total and polarized radio continuum emission of 20 barred galaxies was observed with the Very Large Array (VLA) at 3, 6, 18 and 22 cm and with the Australia Telescope Compact Array (ATCA) at 6 cm and 13 cm. Maps at 30 arcsec angular resolution are presented here. Polarized emission (and therefore a large-scale regular magnetic field) was detected in 17 galaxies. Most galaxies of our sample are similar to non-barred galaxies with respect to the radio/far-infrared flux correlation and equipartition strength of the total magnetic field. Galaxies with highly elongated bars are not always radio-bright. We discuss the correlation of radio properties with the aspect ratio of the bar and other measures of the bar strength. We introduce a new measure of the bar strength, \\Lambda, related to the quadrupole moment of the bar's gravitational potential. The radio surface brightness I of the barred galaxies in our sample is correlated with \\Lambda, I \\propto \\Lambda^0.4+/-0.1, and thus is highest in galaxies with a lon...

Anti-vibration bars for nuclear steam generators

International Nuclear Information System (INIS)

Gowda, B.V.; Wilson, R.M.; Wepfer, R.M.

1986-01-01

A method of installing tubular anti-vibration bars into a tube bundle of a steam generator wherein the tube bundle comprises rows of tubes, with the anti-vibration bars received between adjacent rows of the tube bundle for stabilizing the tubes against vibration. The anti-vibration bars are first inserted between adjacent rows of the tube bundle and a pressurized fluid is then introduced into the anti-vibration bars which are thus expanded into contact with the tubes of the adjacent rows for support

Expandable antivibration bar for a steam generator

International Nuclear Information System (INIS)

Lagally, H.O.

1987-01-01

This patent describes a steam generator for a nuclear power plant comprising a shell, a plurality of tubes having a U-shaped configuration arranged in successive columns within the shell. The tubes are adapted to heat feedwater flowing around the outside of the tubes by the flow of hot reactor coolant within the tubes, and antivibration bars any vibrations of the tubes as a result of steam between the columns of tubes. The improvement described here comprises means for varying the thickness of the antivibration bars to fit substantially the actual space between the columns of tubes comprising first and second bars, with at least one bar being movable, and with at least one mating inclined surface between the first and second bars

Analisis Spektral Daya dan Koherensi EEG Pada Anak Penderita Autism Spectrum Disorders (ASD

Directory of Open Access Journals (Sweden)

Nita Handayani

2017-12-01

Full Text Available Autism Spectrum Disorders (ASD adalah kondisi neurodevelopmental yang berkaitan dengan defisit dalam fungsi eksekutif, emosi, bahasa, dan komunikasi sosial. Beberapa teknik neuroimaging dan neurofisiologi digunakan untuk memahami hubungan antara fungsionalitas otak dan perilaku autis. Quantitative Electroencephalography (QEEG adalah sebuah teknik non-invasif yang dapat digunakan untuk memberikan gambaran fungsionalitas otak melalui beberapa besaran fisis yang dikaji. Pada paper ini akan dibahas tentang karakteristik sinyal listrik otak pada penderita austis berdasarkan analisis QEEG. Perekaman sinyal otak menggunakan Emotiv Epoc 14 channel (AF3, F7, F3, FC5, T7, P7, O1, O2, P8, T7, FC6, F4, F8, AF4 dan 2 channel referensi (CMS dan DRL. Jumlah subjek uji dalam penelitian sebanyak 6 anak penderita autis dan 5 anak sehat sebagai kontrol dengan rentang usia antara 10-15 tahun. Perekaman otak dilakukan pada kondisi rileks dan mata terutup selama 15 menit. Metode analisis data meliputi pre-processing data EEG untuk menghilangkan noise dan artefak, perhitungan spektral daya menggunakan periodogram Welch, dan analisis konektivitas fungsional otak dengan menghitung besarnya koherensi intra-hemisphere dan inter-hemisphere. Dari hasil studi diperoleh bahwa pada anak autis terjadi peningkatan spektral daya pada pita delta dan penurunan spektral daya pada pita alpha dibandingkan dengan subjek kontrol. Analisis konektivitas fungsional otak pada anak autis menunjukkan nilai koherensi intra-hemisphere dan inter-hemisphere yang lebih rendah pada pita delta dan theta, khususnya pada area frontal. QEEG dapat digunakan untuk karakterisasi sinyal otak pada penderita autis dan membedakannya dari subjek normal. Autism Spectrum disorder (ASD is a neurodevelopmental disorder associated with deficits in executive function, emotions, language, and social communication. Several neuroimaging and neurophysiology techniques are used to understand the relationship between

Low energy bar pp physics

International Nuclear Information System (INIS)

Amsler, C.; Crowe, K.

1989-02-01

A detailed investigation of proton-antiproton interactions at low energy has become feasible with the commissioning of the LEAR facility in 1983. We shall shortly review the status of bar pp annihilation at rest and the physics motivations for second generation experiments with the Crystal Barrel detector. This type of detector would be adequate for the study of both Kp and bar pp interactions on an extracted beam of the KAON Factory. We shall conclude with a few remarks on the physics opportunities with bar p's at the KAON Factory which, in our opinion, will not be covered by the present LEAR facility. 11 refs., 10 figs., 2 tabs

PENGGUNAAN METODE STRUCTURAL EQUATION MODELLING UNTUK ANALISIS FAKTOR YANG MEMPENGARUHI MOTIVASI BELAJAR MAHASISWA FIP UMJ

Directory of Open Access Journals (Sweden)

Ririn Widiyasari

2018-02-01

Full Text Available Tujuan yang ingin dicapai dalam penelitian ini adalah mengetahui faktor apa saja  yang mempengaruhi motivasi belajar mahasiswa, apakah terdapat pengaruh yang signifikan antara cara belajar, fasilitas belajar dan lingkungan belajar terhadap motivasi belajar mahasiswa, serta faktor mana yang paling berpengaruh terhadap motivasi belajar mahasiswa. Jumlah sampel dalam penelitian ini adalah 192 mahasiswa (FIP UMJ angkatan tahun 2013-2015 yang aktif mengikuti perkuliahan. Metode penelitian yang dilakukan adalah metode kuantitatif survey. Metode pengambilan data menggunakan  kuesioner dengan skala likert. Metode analisis data yang digunakan adalah analisis deskriptif, dan analisis  Structural Equation Modeling (SEM berbantuan program LISREL 8.3. Uji hipotesis yang digunakan dalam penelitian ini adalah uji Chi-square dan uji t. Hasil penelitian menunjukkan bahwa variabel cara belajar memiliki kontribusi yang paling besar, selanjutnya variabel kedua yang berkontribusi meningkatkan motivasi belajar adalah lingkungan belajar dan terakhir fasilitas belajar memberikan pengaruh yang paling kecil terhadap motivasi belajar. Jadi, variabel laten cara belajar dan lingkungan belajar berpengaruh positif terhadap motivasi belajar dan fasilitas belajar berpengaruh negatif terhadap motivasi belajar.

Methods for reducing lipid oxidation in fish-oil-enriched energy bars

DEFF Research Database (Denmark)

Nielsen, Nina Skall; Jacobsen, Charlotte

2009-01-01

P>Fish oil (FO) enrichment of foods is relevant owing to the beneficial effects of omega-3 polyunsaturated fatty acids on human health. However, the susceptibility of FO to oxidation necessitates careful control to avoid this oxidation. In this study, energy bars were successfully supplemented...... similar protection towards oxidation as packaging the energy bars in modified atmosphere. These protection methods were although not as efficient as addition of FO as micro-encapsulated powder. Addition of the metal chelator ethylene diamine tetra-acetic acid (EDTA) (100-2000 ppm) to emulsified FO...

Demographic response of northern spotted owls to barred owl removal

Science.gov (United States)

Diller, V. Lowell; Hamm, Keith A; Early, Desiree A; Lamphear, David W; Dugger, Katie M.; Yackulic, Charles B.; Schwarz, Carl J.; Carlson, Peter C.; McDonald, Trent L.

2016-01-01

Federally listed as threatened in 1990 primarily because of habitat loss, the northern spotted owl (Strix occidentalis caurina) has continued to decline despite conservation efforts resulting in forested habitat being reserved throughout its range. Recently, there is growing evidence the congeneric invasive barred owl (Strix varia) may be responsible for the continued decline primarily by excluding spotted owls from their preferred habitat. We used a long-term demographic study for spotted owls in coastal northern California as the basis for a pilot barred owl removal experiment. Our demography study used capture–recapture, reproductive output, and territory occupancy data collected from 1990 to 2013 to evaluate trends in vital rates and populations. We used a classic before-after-control-impact (BACI) experimental design to investigate the demographic response of northern spotted owls to the lethal removal of barred owls. According to the best 2-species dynamic occupancy model, there was no evidence of differences in barred or northern spotted owl occupancy prior to the initiation of the treatment (barred owl removal). After treatment, barred owl occupancy was lower in the treated relative to the untreated areas and spotted owl occupancy was higher relative to the untreated areas. Barred owl removal decreased spotted owl territory extinction rates but did not affect territory colonization rates. As a result, spotted owl occupancy increased in the treated area and continued to decline in the untreated areas. Prior to and after barred owl removal, there was no evidence that average fecundity differed on the 2 study areas. However, the greater number of occupied spotted owl sites on the treated areas resulted in greater productivity in the treated areas based on empirical counts of fledged young. Prior to removal, survival was declining at a rate of approximately 0.2% per year for treated and untreated areas. Following treatment, estimated survival was 0.859 for

A Preliminary Study on Detecting Fake Gold Bars Using Prompt Gamma Activation Analysis: Simulation of Neutron Transmission in Gold Bar

Energy Technology Data Exchange (ETDEWEB)

Lee, K. M.; Sun, G. M. [KAERI, Daejeon (Korea, Republic of)

2016-05-15

The purpose of this study is to develop fake gold bar detecting method by using Prompt-gamma activation analysis (PGAA) facility at the Korea Atomic Energy Research Institute (KAERI). PGAA is an established nuclear analytical technique for non-destructive determination of elemental and isotopic compositions. For a preliminary study on detecting fake gold bar, Monte Carlo simulation of neutron transmission in gold bar was conducted and the possibility for detecting fake gold bar was confirmed. Under the gold bullion standard, it guaranteed the government would redeem any amount of currency for its value in gold. After the gold bullion standard ended, gold bars have been the target for investment as ever. But it is well known that fake gold bar exist in the gold market. This cannot be identified easily without performing a testing as it has the same appearance as the pure gold bar. In order to avoid the trading of fake gold bar in the market, they should be monitored thoroughly. Although the transmissivity of cold neutrons are low comparing that of thermal neutrons, the slower neutrons are more apt to be absorbed in a target, and can increase the prompt gamma emission rate. Also the flux of both thermal and cold neutron beam is high enough to activate thick target. If the neutron beam is irradiated on the front and the reverse side of gold bar, all insides of it can be detected.

A Preliminary Study on Detecting Fake Gold Bars Using Prompt Gamma Activation Analysis: Simulation of Neutron Transmission in Gold Bar

International Nuclear Information System (INIS)

Lee, K. M.; Sun, G. M.

2016-01-01

The purpose of this study is to develop fake gold bar detecting method by using Prompt-gamma activation analysis (PGAA) facility at the Korea Atomic Energy Research Institute (KAERI). PGAA is an established nuclear analytical technique for non-destructive determination of elemental and isotopic compositions. For a preliminary study on detecting fake gold bar, Monte Carlo simulation of neutron transmission in gold bar was conducted and the possibility for detecting fake gold bar was confirmed. Under the gold bullion standard, it guaranteed the government would redeem any amount of currency for its value in gold. After the gold bullion standard ended, gold bars have been the target for investment as ever. But it is well known that fake gold bar exist in the gold market. This cannot be identified easily without performing a testing as it has the same appearance as the pure gold bar. In order to avoid the trading of fake gold bar in the market, they should be monitored thoroughly. Although the transmissivity of cold neutrons are low comparing that of thermal neutrons, the slower neutrons are more apt to be absorbed in a target, and can increase the prompt gamma emission rate. Also the flux of both thermal and cold neutron beam is high enough to activate thick target. If the neutron beam is irradiated on the front and the reverse side of gold bar, all insides of it can be detected

21 CFR 886.5800 - Ophthalmic bar reader.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic bar reader. 886.5800 Section 886.5800...) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5800 Ophthalmic bar reader. (a) Identification. An ophthalmic bar reader is a device that consists of a magnifying lens intended for use by a...

Occupational noise exposure of nightclub bar employees in Ireland

Directory of Open Access Journals (Sweden)

Aoife C Kelly

2012-01-01

Full Text Available Due to the transposition of the EU Directive 2003/10/EC into Irish Law, the entertainment sector was obligated to comply with the requirements of the Safety, Health and Welfare at Work (General Application Regulations 2007, Chapter 1 Part 5: Control of Noise at Work since February 2008. Compliance with the Noise Regulations was examined in 9 nightclubs in Ireland. The typical daily noise exposure of 19 bar employees was measured using 2 logging dosimeters and a Type 1 fixed position sound level meter. Physical site inspections identified nightclub noise control measures. Interviews and questionnaires were used to assess the managers and employees awareness of the noise legislation. The average bar employee daily noise exposure (L EX, 8h was 92 dBA, almost 4 times more than the accepted legal limit. None of the venues examined were fully compliant with the requirements of the 2007 Noise Regulations, and awareness of this legislation was limited.

Occupational noise exposure of nightclub bar employees in Ireland.

Science.gov (United States)

Kelly, Aoife C; Boyd, Sara M; Henehan, Gary T M; Chambers, Gordon

2012-01-01

Due to the transposition of the EU Directive 2003/10/EC into Irish Law, the entertainment sector was obligated to comply with the requirements of the Safety, Health and Welfare at Work (General Application) Regulations 2007, Chapter 1 Part 5: Control of Noise at Work since February 2008. Compliance with the Noise Regulations was examined in 9 nightclubs in Ireland. The typical daily noise exposure of 19 bar employees was measured using 2 logging dosimeters and a Type 1 fixed position sound level meter. Physical site inspections identified nightclub noise control measures. Interviews and questionnaires were used to assess the managers and employees awareness of the noise legislation. The average bar employee daily noise exposure (L(EX, 8h)) was 92 dBA, almost 4 times more than the accepted legal limit. None of the venues examined were fully compliant with the requirements of the 2007 Noise Regulations, and awareness of this legislation was limited.

Deciphering the BAR code of membrane modulators.

Science.gov (United States)

Salzer, Ulrich; Kostan, Julius; Djinović-Carugo, Kristina

2017-07-01

The BAR domain is the eponymous domain of the "BAR-domain protein superfamily", a large and diverse set of mostly multi-domain proteins that play eminent roles at the membrane cytoskeleton interface. BAR domain homodimers are the functional units that peripherally associate with lipid membranes and are involved in membrane sculpting activities. Differences in their intrinsic curvatures and lipid-binding properties account for a large variety in membrane modulating properties. Membrane activities of BAR domains are further modified and regulated by intramolecular or inter-subunit domains, by intermolecular protein interactions, and by posttranslational modifications. Rather than providing detailed cell biological information on single members of this superfamily, this review focuses on biochemical, biophysical, and structural aspects and on recent findings that paradigmatically promote our understanding of processes driven and modulated by BAR domains.

Influence of the weighing bar position in vessel on measurement of cement’s particle size distribution by using the buoyancy weighing-bar method

Science.gov (United States)

Tambun, R.; Sihombing, R. O.; Simanjuntak, A.; Hanum, F.

2018-02-01

The buoyancy weighing-bar method is a new simple and cost-effective method to determine the particle size distribution both settling and floating particle. In this method, the density change in a suspension due to particle migration is measured by weighing buoyancy against a weighing-bar hung in the suspension, and then the particle size distribution is calculated using the length of the bar and the time-course change in the mass of the bar. The apparatus of this method consists of a weighing-bar and an analytical balance with a hook for under-floor weighing. The weighing bar is used to detect the density change in suspension. In this study we investigate the influences of position of weighing bar in vessel on settling particle size distribution measurements of cement by using the buoyancy weighing-bar method. The vessel used in this experiment is graduated cylinder with the diameter of 65 mm and the position of weighing bar is in center and off center of vessel. The diameter of weighing bar in this experiment is 10 mm, and the kerosene is used as a dispersion liquids. The results obtained show that the positions of weighing bar in vessel have no significant effect on determination the cement’s particle size distribution by using buoyancy weighing-bar method, and the results obtained are comparable to those measured by using settling balance method.

Numerical Simulations of the Kolsky Compression Bar Test

Energy Technology Data Exchange (ETDEWEB)

Corona, Edmundo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-10-01

The Kolsky compression bar, or split Hopkinson pressure bar (SHPB), is an ex- perimental apparatus used to obtain the stress-strain response of material specimens at strain rates in the order of 10 ² to 10 ⁴ 1/s. Its operation and associated data re- duction are based on principles of one-dimensional wave propagation in rods. Second order effects such as indentation of the bars by the specimen and wave dispersion in the bars, however, can significantly affect aspects of the measured material response. Finite element models of the experimental apparatus were used here to demonstrate these two effects. A procedure proposed by Safa and Gary (2010) to account for bar indentation was also evaluated and shown to improve the estimation of the strain in the bars significantly. The use of pulse shapers was also shown to alleviate the effects of wave dispersion. Combining the two can lead to more reliable results in Kolsky compression bar testing.

Drunk and disorganised: relationships between bar characteristics and customer intoxication in European drinking environments.

Science.gov (United States)

Hughes, Karen; Quigg, Zara; Bellis, Mark A; Calafat, Amador; van Hasselt, Ninette; Kosir, Matej; Voorham, Lotte; Goossens, Ferry X; Duch, Mariangels; Juan, Montse

2012-11-12

Preventing alcohol-related harm in drinking environments is a growing international priority. Factors relating to the physical, social and staffing environments in bars can contribute to increased alcohol consumption and harm. Understanding the relationships between such factors and intoxication in European drinking environments is critical to developing appropriate interventions. We undertook a quantitative observational study in 60 bars in four European cities, in The Netherlands, Slovenia, Spain and the UK (n = 237 observational visits). Using a structured observational schedule, researchers recorded characteristics of the bar environment and rated customer intoxication levels. All physical bar characteristics showed associations with intoxication before interactions between them were controlled for. Hierarchical modelling found significant independent associations between intoxication and use of plastic glassware, promotion of non-alcoholic drinks (often energy drinks), permissive environments, poor washroom facilities, the presence of a dance floor, customer sexual activity/competitiveness and later observational time. Findings suggest that prevention efforts should focus on raising and enforcing managerial standards in bars. While harm reduction measures such as plastic glassware are often promoted for high risk bars, such measures are inadequate to address public health concerns and insufficient to demonstrate social responsibility.

Nonlinear Analysis of an Unstable Bench Press Bar Path and Muscle Activation.

Science.gov (United States)

Lawrence, Michael A; Leib, Daniel J; Ostrowski, Stephanie J; Carlson, Lara A

2017-05-01

Lawrence, MA, Leib, DJ, Ostrowski, SJ, and Carlson, LA. Nonlinear analysis of an unstable bench press bar path and muscle activation. J Strength Cond Res 31(5): 1206-1211, 2017-Unstable resistance exercises are typically performed to improve the ability of stabilizing muscles to maintain joint integrity under a load. The purpose of this study was to examine the effects of an unstable load (as provided by a flexible barbell and a load suspended by elastic bands) on the bar path, the primary musculature, and stabilizing musculature while bench pressing using nonlinear analyses. Fifteen resistance-trained men (age 24.2 ± 2.7 years, mass 84.1 ± 12.0 kg, height 1.77 ± 0.05 m, 9.9 ± 3.4 years of lifting experience, and bench press 1 repetition maximum (RM) 107.5 ± 25.9 kg) volunteered for this study. Subjects pressed 2 sets of 5 repetitions in both stable (total load 75% 1RM) and unstable (total load 60% 1RM) conditions using a standard barbell and a flexible Earthquake bar, respectively. Surface electromyography was used to detect muscle activity of primary movers (pectoralis major, anterior deltoid, and triceps) and bar stabilizing musculature (latissimus dorsi, middle and posterior deltoid, biceps brachii, and upper trapezius). During the unstable condition, the bar moved in more ways and was less predictable in the mediolateral and anteroposterior directions. However, the muscle activation patterns of all muscles were more constrained with the unstable barbell. These findings suggest that the unstable condition was more challenging to control, but subjects controlled the instability by contracting their muscles in a more stable pattern or "staying tight" throughout the exercise.

ANALISIS IMPOR BERAS DI INDONESIA

Directory of Open Access Journals (Sweden)

Ratih Kumala Sari

2014-10-01

Full Text Available Abstrak ___________________________________________________________________ Salah satu kebijakan pemerintah untuk memenuhi kebutuhan beras yaitu dengan menggenjot produksi beras dalam negeri. Namun dengan semakin meningkatnya jumlah penduduk akan meningkatkan permintaan terhadap beras dan upaya peningkatan produktivitas dalam negeri tidak dapat memenuhi kebutuhan beras dalam negeri. Sehingga untuk menutupi kekurangan tersebut pemerintah mengambil keputusan untuk melakukan impor beras dari negara lain. Akan tetapi pada kenyataannya impor beras dilakukan ketika data statistik menunjukkan bahwa Indonesia sedang mengalami surplus beras. Penelitian ini bertujuan untuk mengetahui faktor-faktor apa saja yang mempengaruhi impor beras di Indonesia. Metode analisis yang digunakan adalah analisis regresi linier berganda dengan model Error Correction Model (ECM. Berdasarkan hasil penelitian disimpulkan bahwa secara parsial maupun secara bersama-sama produksi beras, konsumsi beras, harga beras dalam negeri dan nilai tukar rupiah terhadap dollar AS berpengaruh dan signifikan terhadap impor beras di Indonesia. Abstract ___________________________________________________________________ One of the government’s policy to fulfill the need of rice is to boost the domestic production. However, by increasing the population, the demand of rice will also increase and the effort of increasing the domestic productivity cannot supply domestic rice need. So, to cover the shortage the government make decision to import rice from other countries. Yet, in fact importing rice is occurred when the statistical data showed that the supply of rice in Indonesia is surplus. The purpose of this research is necessary to study the factors which influence the import of rice in Indonesia. The analysis method used is multiple linear regression analysis model with Error Correction Model (ECM. Based on the research proven that partially or jointly the production, the consumption, the

ANALISIS LITERASI EKONOMI

Directory of Open Access Journals (Sweden)

Peter Garlans Sina

2012-10-01

Full Text Available Abstract: Analysis of Economic Literacy. The aim of this research is as an effort to increase economic literacy for individuals and households who want to achieve prosperity. Therefore, the obligation of improving the economic literacy needs to be done in a well-planned manner and come from the strong intention to learn in order to improve the economic literacy. It could have an effect on the assets accumulation, a better debt management, as a protection, as well as to increase savings and managing spending intelligently.   Keyword: economic literacy, asset, debt, protection, saving, spending   Abstrak: Analisis Literasi Ekonomi. Tulisan ini bertujuan sebagai upaya meningkatkan literasi ekonomi bagi individu maupun rumah tangga yang menginginkan mencapai kesejahteraan. Oleh karena itu, kewajiban meningkatkan literasi ekonomi perlu dilakukan secara terencana dan diawali dari niat untuk belajar meningkatkan literasi ekonomi karena dapat berefek pada akumulasi aset, pengelolaan utang yang tepat, proteksi, meningkatkan tabungan dan cerdas mengelola pengeluaran.   Kata kunci: literasi ekonomi, aset, utang, proteksi, menabung, pengeluaran

Scroll bar growth on the coastal Trinity River, TX, USA

Science.gov (United States)

Mason, J.; Hassenruck-Gudipati, H. J.; Mohrig, D. C.

2017-12-01

The processes leading to the formation and growth of scroll bars remain relatively mysterious despite how often they are referenced in fluvial literature. Their definition is descriptive; they are characterized as arcuate topographic highs present on the inner banks of channel bends on meandering rivers, landward of point bars. Often, they are used as proxies for previous positions of point bars. This assumption of a one-to-one correspondence between point bars and scroll bars should be reconsidered as 1) planform curvature for scroll bars is consistently smaller than the curvature for adjacent point bars, and 2) deposition on the scroll bar is typically distinct and disconnected from the adjacent point bar deposition. Results from time-lapse airborne lidar data as well as from trenches through five separate scroll bar - point bar pairings on the Trinity River in east TX, USA, will be discussed in relation to formative scroll bar processes and their connection to point bars. On the lidar difference map, scroll bar growth appears as a strip of increased deposition flanked on both the land- and channel-ward sides by areas with no or limited deposition. Trenches perpendicular to these scrolls typically show a base of dune-scale cross stratification interpreted to be associated with a previous position of the point bar. These dune sets are overlain by sets of climbing-ripple cross-strata that form the core of the modern scroll bar and preserve a record of multiple transport directions (away from, towards, and parallel to the channel). Preliminary Trinity River grain-size analyses show that the constructional scrolls are enriched in all grain sizes less than 250 microns in diameter, while point bars are enriched in all grain sizes above this cut off. Scroll bars are hypothesized to be akin to levees along the inner banks of channels-flow expansion caused by the presence of point bars induces deposition of suspended sediment that defines the positions of the scroll bars.

Nutritional Evaluation of NASA's Rodent Food Bar Diet

Science.gov (United States)

Barrett, Joyce E.; Yu, Diane S.; Dalton, Bonnie P.

2000-01-01

Tests are being conducted on NASA's rodent Food Bar in preparation for long-term use as the rat and mouse diet aboard the International Space Station. Nutritional analyses are performed after the bars are manufactured and then repeated periodically to determine nutritional stability. The primary factors analyzed are protein, ash, fat, fiber, moisture, amino acids, fatty acids, and minerals. Nutrient levels are compared to values published in the National Research Council's dietary requirements for rodents, and also to those contained in several commonly used commercial rodent lab diets. The Food Bar is manufactured from a powdered diet to which moisture is added as it is processed through an extruder. The bars are dipped into potassium sorbate, vacuum-sealed, and irradiated. In order to determine nutrient changes during extrusion and irradiation, the powdered diet, the non-irradiated bars, and the irradiated bars are all analyzed. We have observed lower values for some nutrients (iodine, vitamin K, and iron) in the Food Bars compared with NRC requirements. Many nutrients in the Food Bars are contained at a higher level than levels in the NRC requirements. An additional factor we are investigating is the 26% moisture level in the Food Bars, which drops to about 15% within a week, compared to a stable 10% moisture in many standard lab chow diets. In addition to the nutritional analyses, the food bar is being fed to several strains of rats and mice, and feeding study and necropsy results are being observed (Barrett et al, unpublished data). Information from the nutritional analyses and from the rodent studies will enable us to recommend the formulation that will most adequately meet the rodent Food Bar requirements for long-term use aboard the Space Station.

Searches for $B^0_{(s)} \\to J/\\psi p\\bar{p}$ and $B^+ \\to J/\\psi p\\bar{p}\\pi^+$ decays

CERN Document Server

INSPIRE-00258707; Adeva, B; Adinolfi, M; Adrover, C; Affolder, A; Ajaltouni, Z; Albrecht, J; Alessio, F; Alexander, M; Ali, S; Alkhazov, G; Alvarez Cartelle, P; Alves Jr, A A; Amato, S; Amerio, S; Amhis, Y; Anderlini, L; Anderson, J; Andreassen, R; Andrews, J E; Appleby, R B; Aquines Gutierrez, O; Archilli, F; Artamonov, A; Artuso, M; Aslanides, E; Auriemma, G; Baalouch, M; Bachmann, S; Back, J J; Baesso, C; Balagura, V; Baldini, W; Barlow, R J; Barschel, C; Barsuk, S; Barter, W; Bauer, Th; Bay, A; Beddow, J; Bedeschi, F; Bediaga, I; Belogurov, S; Belous, K; Belyaev, I; Ben-Haim, E; Bencivenni, G; Benson, S; Benton, J; Berezhnoy, A; Bernet, R; Bettler, M -O; van Beuzekom, M; Bien, A; Bifani, S; Bird, T; Bizzeti, A; Bjørnstad, P M; Blake, T; Blanc, F; Blouw, J; Blusk, S; Bocci, V; Bondar, A; Bondar, N; Bonivento, W; Borghi, S; Borgia, A; Bowcock, T J V; Bowen, E; Bozzi, C; Brambach, T; van den Brand, J; Bressieux, J; Brett, D; Britsch, M; Britton, T; Brook, N H; Brown, H; Burducea, I; Bursche, A; Busetto, G; Buytaert, J; Cadeddu, S; Callot, O; Calvi, M; Calvo Gomez, M; Camboni, A; Campana, P; Campora Perez, D; Carbone, A; Carboni, G; Cardinale, R; Cardini, A; Carranza-Mejia, H; Carson, L; Carvalho Akiba, K; Casse, G; Castillo Garcia, L; Cattaneo, M; Cauet, Ch; Cenci, R; Charles, M; Charpentier, Ph; Chen, P; Chiapolini, N; Chrzaszcz, M; Ciba, K; Cid Vidal, X; Ciezarek, G; Clarke, P E L; Clemencic, M; Cliff, H V; Closier, J; Coca, C; Coco, V; Cogan, J; Cogneras, E; Collins, P; Comerma-Montells, A; Contu, A; Cook, A; Coombes, M; Coquereau, S; Corti, G; Couturier, B; Cowan, G A; Craik, D C; Cunliffe, S; Currie, R; D'Ambrosio, C; David, P; David, P N Y; Davis, A; De Bonis, I; De Bruyn, K; De Capua, S; De Cian, M; De Miranda, J M; De Paula, L; De Silva, W; De Simone, P; Decamp, D; Deckenhoff, M; Del Buono, L; Déléage, N; Derkach, D; Deschamps, O; Dettori, F; Di Canto, A; Di Ruscio, F; Dijkstra, H; Dogaru, M; Donleavy, S; Dordei, F; Dosil Suárez, A; Dossett, D; Dovbnya, A; Dupertuis, F; Durante, P; Dzhelyadin, R; Dziurda, A; Dzyuba, A; Easo, S; Egede, U; Egorychev, V; Eidelman, S; van Eijk, D; Eisenhardt, S; Eitschberger, U; Ekelhof, R; Eklund, L; El Rifai, I; Elsasser, Ch; Falabella, A; Färber, C; Fardell, G; Farinelli, C; Farry, S; Fave, V; Ferguson, D; Fernandez Albor, V; Ferreira Rodrigues, F; Ferro-Luzzi, M; Filippov, S; Fiore, M; Fitzpatrick, C; Fontana, M; Fontanelli, F; Forty, R; Francisco, O; Frank, M; Frei, C; Frosini, M; Furcas, S; Furfaro, E; Gallas Torreira, A; Galli, D; Gandelman, M; Gandini, P; Gao, Y; Garofoli, J; Garosi, P; Garra Tico, J; Garrido, L; Gaspar, C; Gauld, R; Gersabeck, E; Gersabeck, M; Gershon, T; Ghez, Ph; Gibson, V; Giubega, L; Gligorov, V V; Göbel, C; Golubkov, D; Golutvin, A; Gomes, A; Gordon, H; Grabalosa Gándara, M; Graciani Diaz, R; Granado Cardoso, L A; Graugés, E; Graziani, G; Grecu, A; Greening, E; Gregson, S; Griffith, P; Grünberg, O; Gui, B; Gushchin, E; Guz, Yu; Gys, T; Hadjivasiliou, C; Haefeli, G; Haen, C; Haines, S C; Hall, S; Hamilton, B; Hampson, T; Hansmann-Menzemer, S; Harnew, N; Harnew, S T; Harrison, J; Hartmann, T; He, J; Head, T; Heijne, V; Hennessy, K; Henrard, P; Hernando Morata, J A; van Herwijnen, E; Hicheur, A; Hicks, E; Hill, D; Hoballah, M; Holtrop, M; Hombach, C; Hopchev, P; Hulsbergen, W; Hunt, P; Huse, T; Hussain, N; Hutchcroft, D; Hynds, D; Iakovenko, V; Idzik, M; Ilten, P; Jacobsson, R; Jaeger, A; Jans, E; Jaton, P; Jawahery, A; Jing, F; John, M; Johnson, D; Jones, C R; Joram, C; Jost, B; Kaballo, M; Kandybei, S; Kanso, W; Karacson, M; Karbach, T M; Kenyon, I R; Ketel, T; Keune, A; Khanji, B; Kochebina, O; Komarov, I; Koopman, R F; Koppenburg, P; Korolev, M; Kozlinskiy, A; Kravchuk, L; Kreplin, K; Kreps, M; Krocker, G; Krokovny, P; Kruse, F; Kucharczyk, M; Kudryavtsev, V; Kvaratskheliya, T; La Thi, V N; Lacarrere, D; Lafferty, G; Lai, A; Lambert, D; Lambert, R W; Lanciotti, E; Lanfranchi, G; Langenbruch, C; Latham, T; Lazzeroni, C; Le Gac, R; van Leerdam, J; Lees, J -P; Lefèvre, R; Leflat, A; Lefrançois, J; Leo, S; Leroy, O; Lesiak, T; Leverington, B; Li, Y; Li Gioi, L; Liles, M; Lindner, R; Linn, C; Liu, B; Liu, G; Lohn, S; Longstaff, I; Lopes, J H; Lopez-March, N; Lu, H; Lucchesi, D; Luisier, J; Luo, H; Machefert, F; Machikhiliyan, I V; Maciuc, F; Maev, O; Malde, S; Manca, G; Mancinelli, G; Maratas, J; Marconi, U; Marino, P; Märki, R; Marks, J; Martellotti, G; Martens, A; Martín Sánchez, A; Martinelli, M; Martinez Santos, D; Martins Tostes, D; Massafferri, A; Matev, R; Mathe, Z; Matteuzzi, C; Maurice, E; Mazurov, A; Mc Skelly, B; McCarthy, J; McNab, A; McNulty, R; Meadows, B; Meier, F; Meissner, M; Merk, M; Milanes, D A; Minard, M -N; Molina Rodriguez, J; Monteil, S; Moran, D; Morawski, P; Mordà, A; Morello, M J; Mountain, R; Mous, I; Muheim, F; Müller, K; Muresan, R; Muryn, B; Muster, B; Naik, P; Nakada, T; Nandakumar, R; Nasteva, I; Needham, M; Neubert, S; Neufeld, N; Nguyen, A D; Nguyen, T D; Nguyen-Mau, C; Nicol, M; Niess, V; Niet, R; Nikitin, N; Nikodem, T; Nomerotski, A; Novoselov, A; Oblakowska-Mucha, A; Obraztsov, V; Oggero, S; Ogilvy, S; Okhrimenko, O; Oldeman, R; Orlandea, M; Otalora Goicochea, J M; Owen, P; Oyanguren, A; Pal, B K; Palano, A; Palutan, M; Panman, J; Papanestis, A; Pappagallo, M; Parkes, C; Parkinson, C J; Passaleva, G; Patel, G D; Patel, M; Patrick, G N; Patrignani, C; Pavel-Nicorescu, C; Pazos Alvarez, A; Pellegrino, A; Penso, G; Pepe Altarelli, M; Perazzini, S; Perez Trigo, E; Pérez-Calero Yzquierdo, A; Perret, P; Perrin-Terrin, M; Pescatore, L; Pessina, G; Petridis, K; Petrolini, A; Phan, A; Picatoste Olloqui, E; Pietrzyk, B; Pilař, T; Pinci, D; Playfer, S; Plo Casasus, M; Polci, F; Polok, G; Poluektov, A; Polycarpo, E; Popov, A; Popov, D; Popovici, B; Potterat, C; Powell, A; Prisciandaro, J; Pritchard, A; Prouve, C; Pugatch, V; Puig Navarro, A; Punzi, G; Qian, W; Rademacker, J H; Rakotomiaramanana, B; Rangel, M S; Raniuk, I; Rauschmayr, N; Raven, G; Redford, S; Reid, M M; dos Reis, A C; Ricciardi, S; Richards, A; Rinnert, K; Rives Molina, V; Roa Romero, D A; Robbe, P; Roberts, D A; Rodrigues, E; Rodriguez Perez, P; Roiser, S; Romanovsky, V; Romero Vidal, A; Rouvinet, J; Ruf, T; Ruffini, F; Ruiz, H; Ruiz Valls, P; Sabatino, G; Saborido Silva, J J; Sagidova, N; Sail, P; Saitta, B; Salustino Guimaraes, V; Salzmann, C; Sanmartin Sedes, B; Sannino, M; Santacesaria, R; Santamarina Rios, C; Santovetti, E; Sapunov, M; Sarti, A; Satriano, C; Satta, A; Savrie, M; Savrina, D; Schaack, P; Schiller, M; Schindler, H; Schlupp, M; Schmelling, M; Schmidt, B; Schneider, O; Schopper, A; Schune, M -H; Schwemmer, R; Sciascia, B; Sciubba, A; Seco, M; Semennikov, A; Sepp, I; Serra, N; Serrano, J; Seyfert, P; Shapkin, M; Shapoval, I; Shatalov, P; Shcheglov, Y; Shears, T; Shekhtman, L; Shevchenko, O; Shevchenko, V; Shires, A; Silva Coutinho, R; Sirendi, M; Skwarnicki, T; Smith, N A; Smith, E; Smith, J; Smith, M; Sokoloff, M D; Soler, F J P; Soomro, F; Souza, D; Souza De Paula, B; Spaan, B; Sparkes, A; Spradlin, P; Stagni, F; Stahl, S; Steinkamp, O; Stoica, S; Stone, S; Storaci, B; Straticiuc, M; Straumann, U; Subbiah, V K; Sun, L; Swientek, S; Syropoulos, V; Szczekowski, M; Szczypka, P; Szumlak, T; T'Jampens, S; Teklishyn, M; Teodorescu, E; Teubert, F; Thomas, C; Thomas, E; van Tilburg, J; Tisserand, V; Tobin, M; Tolk, S; Tonelli, D; Topp-Joergensen, S; Torr, N; Tournefier, E; Tourneur, S; Tran, M T; Tresch, M; Tsaregorodtsev, A; Tsopelas, P; Tuning, N; Ubeda Garcia, M; Ukleja, A; Urner, D; Ustyuzhanin, A; Uwer, U; Vagnoni, V; Valenti, G; Vallier, A; Van Dijk, M; Vazquez Gomez, R; Vazquez Regueiro, P; Vázquez Sierra, C; Vecchi, S; Velthuis, J J; Veltri, M; Veneziano, G; Vesterinen, M; Viaud, B; Vieira, D; Vilasis-Cardona, X; Vollhardt, A; Volyanskyy, D; Voong, D; Vorobyev, A; Vorobyev, V; Voß, C; Voss, H; Waldi, R; Wallace, C; Wallace, R; Wandernoth, S; Wang, J; Ward, D R; Watson, N K; Webber, A D; Websdale, D; Whitehead, M; Wicht, J; Wiechczynski, J; Wiedner, D; Wiggers, L; Wilkinson, G; Williams, M P; Williams, M; Wilson, F F; Wimberley, J; Wishahi, J; Witek, M; Wotton, S A; Wright, S; Wu, S; Wyllie, K; Xie, Y; Xing, Z; Yang, Z; Young, R; Yuan, X; Yushchenko, O; Zangoli, M; Zavertyaev, M; Zhang, F; Zhang, L; Zhang, W C; Zhang, Y; Zhelezov, A; Zhokhov, A; Zhong, L; Zvyagin, A

2013-01-01

The results of searches for $B^0_{(s)} \\to J/\\psi p\\bar{p}$ and $B^+ \\to J/\\psi p\\bar{p}\\pi^+$ decays are reported. The analysis is based on a data sample, corresponding to an integrated luminosity of 1.0 fb$^{-1}$ of $pp$ collisions, collected with the LHCb detector. An excess with 2.8 $\\sigma$ significance is seen for the decay $B^0_{s} \\to J/\\psi p\\bar{p}$ and an upper limit on the branching fraction is set at the 90% confidence level: $B(B^0_s \\to J/\\psi p\\bar{p}) \\lt$ 4.8 x 10$^{-6}$, which is the first such limit. No significant signals are seen for $B^0 \\to J/\\psi p\\bar{p}$ and $B^+ \\to J/\\psi p\\bar{p}\\pi^+$ decays, for which the corresponding limits are set: $B(B^0 \\to J/\\psi p\\bar{p}) \\lt$ 5.2 x 10$^{-7}$, which significantly improves the existing limit; and $B(B^+ \\to J/\\psi p\\bar{p}\\pi^+) \\lt$ 5.0 x 10$^{-7}$, which is the first limit on this branching fraction.

Low-temperature growth of (2 1-bar 1-bar 0) ZnO nanofilm on NaCl (0 0 1) surface by ion beam sputtering

International Nuclear Information System (INIS)

Shen, Jung-Hsiung; Yeh, Sung-Wei; Huang, Hsing-Lu; Gan, Dershin

2009-01-01

ZnO nanofilm of the (2 1 -bar 1 -bar 0) surface was prepared by ion beam sputtering deposition. The nanofilm was prepared on NaCl (0 0 1) surface at 200 o C to produce nearly pure (2 1 -bar 1 -bar 0) ZnO texture and the orientation relationship was determined and the interface discussed. Transmission electron microscopy lattice images were used to find the interface formed between ZnO nanocrystals. The ZnO nanocrystals coalesced to form a straight (0 1 -bar 1 -bar 2) interface. The photoluminescence spectrum from the (2 1 -bar 1 -bar 0) ZnO surface showed only a near-band-edge UV emission peak.

Nearshore bars and the break-point hypothesis

Science.gov (United States)

Sallenger, A.H.; Howd, P.A.

1989-01-01

The set of hypotheses calling for bar formation at the break point was tested with field data. During two different experiments, waves were measured across the surf zone coincident with the development of a nearshore bar. We use a criterion, based on the wave height to depth ratio, to determine the offshore limit of the inner surf zone. During the first experiment, the bar became better developed and migrated offshore while remaining well within the inner surf zone. During the second experiment, the surf zone was narrower and we cannot rule out the possibility of break point processes contributing to bar development. We conclude that bars are not necessarily coupled with the break point and can become better developed and migrate offshore while being in the inner surf zone landward from initial wave breaking in the outer surf zone. ?? 1989.

Charmonium and bottomonium in bar pp interactions

International Nuclear Information System (INIS)

Pordes, S.

1993-12-01

In this talk, I presented some examples of data from the CDF collaboration on J/ψ, χ, ψ' and Γ production. Such data are used to test models of production dynamics and for the understanding of rates for b quark production. I am not a member of the CDF experiment and showed their data with permission as an interested and impressed spectator. Data from D0 may be found in the talk of D. Denisov. As a complement to this data from the highest energy accelerator experiment, operating at √ bar s= 1.8 TeV, I also showed data from Fermilab experiment E760 on masses, widths, states and branching ratios in the Charmonium system, obtained by studying resonant formation of c bar c states in p bar p annihilation at √ bar s = m(c bar c)

ON THE CURVATURE OF DUST LANES IN GALACTIC BARS

International Nuclear Information System (INIS)

Comeron, Sebastien; MartInez-Valpuesta, Inma; Knapen, Johan H.; Beckman, John E.

2009-01-01

We test the theoretical prediction that the straightest dust lanes in bars are found in strongly barred galaxies, or more specifically, that the degree of curvature of the dust lanes is inversely proportional to the strength of the bar. The test uses archival images of barred galaxies for which a reliable nonaxisymmetric torque parameter (Q b ) and the radius at which Q b has been measured (r(Q b )) have been published in the literature. Our results confirm the theoretical prediction but show a large spread that cannot be accounted for by measurement errors. We simulate 238 galaxies with different bar and bulge parameters in order to investigate the origin of the spread in the dust lane curvature versus Q b relation. From these simulations, we conclude that the spread is greatly reduced when describing the bar strength as a linear combination of the bar parameters Q b and the quotient of the major and minor axes of the bar, a/b. Thus, we conclude that the dust lane curvature is predominantly determined by the parameters of the bar.

Experimental Study on Basic Mechanical Properties of BFRP Bars

Science.gov (United States)

Fan, Xiaochun; Xu, Ting; Zhou, Zhengrong; Zhou, Xun

2017-10-01

Basalt Fiber Reinforced Polymer (BFRP) bars have the advantages of corrosion resistance, high strength, light weight, good dielectric properties, and they are new type of green reinforced alternative material. In order to determine the mechanical properties of BFRP bars, the tensile strength of basalt fiber bars was necessary to be studied. The diameters of the basalt fiber bars were compared by means of uniaxial tensile test in this article. Then the stress-strain curve can be drawn out. The results show that the stress - strain curve of BFRP bars present straight line relation, and there is no sign before failure; there is no yield platform on the stress-strain curve of BFRP bars, which are typical brittle material;the tensile strength of BFRP bars is about 3 times higher than that of ordinary steel bars. and the elastic modulus is about 1/5 of that of ordinary steel; the ultimate tensile strength of BFRP bars varies little with the increase of diameter, but there exist some differences in modulus values.

Mechanical Properties of Welded Deformed Reinforcing Steel Bars

Directory of Open Access Journals (Sweden)

Ghafur H. Ahmed

2015-05-01

Full Text Available Reinforcement strength, ductility and bendability properties are important components in design of reinforced concrete members, as the strength of any member comes mainly from reinforcement. Strain compatibility and plastic behaviors are mainly depending on reinforcement ductility. In construction practice, often welding of the bars is required. Welding of reinforcement is an instant solution in many cases, whereas welding is not a routine connection process. Welding will cause deficiencies in reinforcement bars, metallurgical changes and re-crystallization of microstructure of particles. Weld metal toughness is extremely sensitive to the welding heat input that decreases both of its strength and ductility. For determining the effects of welding in reinforcement properties, 48 specimens were tested with 5 different bar diameters, divided into six groups. Investigated parameters were: properties of un-welded bars; strength, ductility and density of weld metal; strength and ductility reduction due to heat input for bundled bars and transverse bars; welding effect on bars’ bending properties; behavior of different joint types; properties of three weld groove shapes also the locations and types of failures sections. Results show that, strength and elongation of the welded bars decreased by (10-40% and (30-60% respectively. Cold bending of welded bars and groove welds shall be prevented.

Numerical estimation of concrete beams reinforced with FRP bars

Directory of Open Access Journals (Sweden)

Protchenko Kostiantyn

2016-01-01

Full Text Available This paper introduces numerical investigation on mechanical performance of a concrete beam reinforced with Fibre Reinforced Polymer (FRP bars, which can be competitive alternative to steel bars for enhancing concrete structures. The objective of this work is being identified as elaborating of reliable numerical model for predicting strength capacity of structural elements with implementation of Finite Element Analysis (FEA. The numerical model is based on experimental study prepared for the beams, which were reinforced with Basalt FRP (BFRP bars and steel bars (for comparison. The results obtained for the beams reinforced with steel bars are found to be in close agreement with the experimental results. However, the beams reinforced with BFRP bars in experimental programme demonstrated higher bearing capacity than those reinforced with steel bars, which is not in a good convergence with numerical results. Authors did attempt to describe the reasons on achieving experimentally higher bearing capacity of beams reinforced with BFRP bars.

Measurement of the branching ratios of the decays Ξ0→Σ+e-νbare and Ξ-bar0->Σ-bar+e+νe

International Nuclear Information System (INIS)

Batley, J.R.; Kalmus, G.E.; Lazzeroni, C.

2007-01-01

From 56 days of data taking in 2002, the NA48/1 experiment observed 6316 Ξ 0 ->Σ + e - ν-bar e candidates (with the subsequent Σ + →pπ 0 decay) and 555 Ξ-bar 0 →Σ-bar + e + ν e candidates with background contamination of 215±44 and 136±8 events, respectively. From these samples, the branching ratios BR(Ξ 0 →Σ + e - ν-bar e )=(2.51±0.03 stat ±0.09 syst )x10 -4 and BR(Ξ-bar 0 →Σ-bar + e + ν e )=(2.55±0.14 stat ±0.10 syst )x10 -4 were measured allowing the determination of the CKM matrix element vertical bar V us vertical bar =0.209 -0.028 +0.023 . Using the Particle Data Group average for vertical bar V us vertical bar obtained in semileptonic kaon decays, we measured the ratio g 1 /f 1 =1.20±0.05 of the axial-vector to vector form factors.

Anti-vibration bars for nuclear steam generators

International Nuclear Information System (INIS)

Gowda, B.V.; Wilson, R.M.; Wepfer, R.M.

1988-01-01

This patent describes anti-vibrations bars structurally supporting tubes carrying high-temperature coolant in a steam generator, the antivibration bars being disposed between adjacent rows of tubes and expanded from a rest state to an expanded state as pressure is applied to the interior of the anti-vibration bars, each of the anti-vibration bars being configured as a hollow member of a rectangular shape. The rectangular shape comprising a pair of opposing wall lengths and a pair of opposing wall widths, each of the wall lengths have a thickness greater than that of the wall widths to facilitate expansion of the opposing wall lengths away from each other and into contact respectively with tubes of adjacent rows, the wall lengths having sufficient rigidity to resist deformation as the bars are expanded to their expanded state so that the wall lengths make a line contact with their respective tubes

Search for narrow structures in pp-barπ+ and Λp-bar+- systems

International Nuclear Information System (INIS)

Chung, S.U.; Etkin, A.; Fernow, R.C.; Foley, K.J.; Goldman, J.H.; Kirk, H.; Kopp, J.; Lesnik, A.; Love, W.A.; Morris, T.W.; Ozaki, S.; Platner, E.D.; Protopopescu, S.D.; Saulys, A.; Weygand, D.P.; Wheeler, C.D.; Willen, E.H.; Winik, M.; Bensinger, J.; Morris, W.; Lindenbaum, S.J.; Kramer, M.A.; Mallik, U.; Bar-Yam, Z.; Dowd, J.; Kern, W.; Button-Shafer, J.; Dhar, S.; Lichti, R.

1981-01-01

We have performed a high-statistics search for narrow meson states (GAMMA - p interactions at 16 GeV/c and decaying into pp-barπ + or Λp-barπ +- . This is the first systematic search in channels requiring exchange of exotic mesons. The cross section for production of such states is ruled out at the 95% confidence level with upper limits ranging from approx.10 nb at 2.3 GeV to approx.40 nb at 2.8 GeV

Real-time Grill Bar Occupation: Archiving Instrument

DEFF Research Database (Denmark)

2015-01-01

The project explores the unregarded function of the classic Danish grill bar, currently disappearing due to processes of gentrification. Despite its unassuming appearance, the grill bar is a vital place for social interaction and coexistence on an informal basis.Its architecture, often referred......’, conducted at the Aarhus School of Architecture. Engaging Through Architecture: “Real time Grill Bar Occupation wants to engage with the audience and questions the role of the architect (and architecture itself) in relation to the social dimension of the city – more specifically the seemingly banal function...... of the typical Danish grill bar as a vital place of social co-existence and informal interaction”....

32 CFR 776.66 - Bar admission and disciplinary matters.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Bar admission and disciplinary matters. 776.66... ADVOCATE GENERAL Rules of Professional Conduct § 776.66 Bar admission and disciplinary matters. (a) Bar admission and disciplinary matters. A covered attorney, in connection with any application for bar admission...

Un approccio innovativo per l’analisi quantitativa delle superfici di frattura a fatica nelle ghise sferoidali mediante elaborazione di immagini

Directory of Open Access Journals (Sweden)

O. Di Bartolomeo

2008-07-01

Full Text Available Le osservazioni al microscopio elettronico a scansione (SEM delle superfici di frattura ottenute a seguito di rotture per fatica consentono di evidenziare alcuni meccanismi di avanzamento che dipendono dal materiale e dalla modalità di applicazione delle sollecitazioni. L’introduzione di moderne tecniche di analisi di immagine assistite al calcolatore permette di elaborare un numero di informazioni elevato che consente di porre in relazione le caratteristiche morfologiche locali con il comportamento meccanico macroscopico del materiale.In questo lavoro è stata implementata una tecnica innovativa di analisi di immagine basata sull’analisi della tessitura, valutando l’influenza delle condizioni di applicazione della sollecitazione (ΔK applicato sulla evoluzione del clivaggio rilevato sulle superfici di frattura a fatica di una ghisa sferoidale ferrito-perlitica.

CP violation in single top quark production and decay via pp-bar --> tb-bar + X --> W sup + bb-bar + X within the MSSM A possible application for measuring arg(At) at hadron colliders

CERN Document Server

Bar-Shalom, S; Soni, A

1998-01-01

CP-nonconserving effects in the reaction pp-bar-->tb-bar+X--> W sup + bb-bar+X, driven by the supersymmetric CP-odd phase of the top squark trilinear soft breaking term arg(A sub t), are studied. We discuss the CP-nonconserving effects in both production and the associated decay amplitudes of the top quark. We find that, within a plausible low energy scenario of the MSSM and keeping the neutron electric dipole moment below its current limit, a CP-violating cross-section asymmetry as large as 2-3% can arise if some of the parameters lie in a favorable range. A partial rate asymmetry originating only in the top quark decay t --> W sup + b is found to be, in general, below the 0.1% level which is somewhat smaller than previous claims. For a low tan beta of order one the decay asymmetry can reach at the most approx 0.3%. This (few) percent level overall CP-violating signal in pp-bar --> tb-bar + X --> W sup + bb-bar + X might be within the reach of the future 2(4) TeV pp-bar Fermilab Tevatron collider that may be...

Analisis Rugi Daya Pada Penyulang Bangli Dengan Beroperasinya PLTS Kayubihi

Directory of Open Access Journals (Sweden)

I GN Dion Adiputra

2015-06-01

Full Text Available Analisis rugi daya pada Penyulang Bangli dilakukan untuk mengetahui perbanding an rugi daya pada jaringan distribusi setelah penempatan pembangkit tersebar jenis PLTS berkapasitas 1 MWp. Lokasi penempatan PLTS ditentukan berdasarkan analisis sensitivitas bus. Nilai sensitivitas bus(?didapat dengan cara membandingkan nilai rugi daya pada sistem dengan total beban yang terhubung pada bus. Penelitian ini menggunakan simulasi aliran daya dengan metode aliran daya Newton-Raphson. Hasil penelitian menunjukkan bus TK 0041 memiliki sensitivitas terbesar dengan nilai ?= 0,178. Dari hasil simulasi aliran daya, penempatan PLTS 1MWp pada lokasi alternatif 1 menghasilkan rugi daya minimum pada Penyulang Bangli yaitu 103,1 kW atau 3,3% dari total suplai daya 3071 kW. Pemasangan PLTS dapat menurunkan rugi daya pada Penyulang Bangli sebesar 57 kW dari total rugi daya pada kondisi tanpa PLTS yaitu 160,1 kW. Bila dibandingkan dengan kondisi eksisting, penem patan PLTS pada lokasi alternatif 1 memiliki selisih rugi daya 7,3 kW lebih kecil dari total rugi daya yang dihasilkan kondisi eksisting sebesar 110,4kW.

ANALISIS TINGKAT KAPABILITAS SISTEM INFORMASI RUMAH SAKIT BERDASARKAN COBIT 5 (MEA01 PADA RSUD TUGUREJO SEMARANG

Directory of Open Access Journals (Sweden)

Ariel Bagus Nugroho

2015-11-01

Full Text Available RSUD Tugurejo Semarang merupakan Rumah Sakit kelas B milik pemerintah Provinsi Jawa Tengah yang menyediakan pelayanan jasa untuk masyarakat. Dalam manajemen pengolahan data, RSUD Tugurejo Semarang telah menggunakan sistem informasi rumah sakit. Untuk mengetahui apakah sistem informasi telah berjalan seperti yang diharapkan, maka perlu dilakukan analisis tatakelola teknologi informasi. Pada penelitian ini analisis tatakelola teknologi informasi berfokus pada proses pengawasan, evaluasi dan penilaian kinerja, dan kesesuaian kinerja teknologi informasi, yaitu domain MEA01 pada framework COBIT 5.Tujuan penelitian ini untuk mengetahui tingkat kapabilitas dan strategi perbaikan untuk proses pengawasan, evaluasi dan penilaian kinerja dan kesesuaian TI. Metode pengumpulan  data penelitian ini dengan menggunakan studi dokumen, kuesioner dan wawancara kemudian dianalisis tingkat kapabilitas dan kesenjangan. Tingkat kapabilitas yang didapat dari hasil penelitian yaitu berada level 2 (managed. Untuk menaikkan tingkat kapabilitas pada level 3 maka maka perlu dilakukan secara bertahap strategi perbaikan pada PA 2.1, PA2.2, PA 3.1, dan 3.2. Kata kunci: Analisis Tata Kelola TI, COBIT 5, MEA01, Tingkat Kapabilitas, Rumah Sakit.

KONDISI CURAH HUJAN PADA KEJADIAN BANJIR JAKARTA DAN ANALISIS KONDISI UDARA ATAS WILAYAH JAKARTA BULAN JANUARI – FEBRUARI 2013

OpenAIRE

Syaifullah, M. Djazim

2018-01-01

IntisariKondisi curah hujan di wilayah Jakarta pada kejadian banjir besar tanggal 17 Januari 2013 telah dianalisis yang dihubungkan dengan kondisi atmosfer pada selang waktu tersebut. Data curah hujan menggunakan data TRMM sedangkan analisis kondisi atmosfer menggunakan data rawinsonde. Hasil analisis menunjukkan bahwa puncak kejadian banjir Jakarta musim hujan tahun 2013 terjadi pada tanggal 17 Januari 2013 disebabkan oleh faktor lokal yang sangat kuat ditambah dengan faktor global yang mend...

Impact of the Lok-bar for High-precision Radiotherapy with Tomotherapy.

Science.gov (United States)

Hirata, Makoto; Monzen, Hajime; Tamura, Mikoto; Kubo, Kazuki; Matsumoto, Kenji; Hanaoka, Kohei; Okumura, Masahiko; Nishimura, Yasumasa

2018-05-01

Patient immobilization systems are used to establish a reproducible patient position relative to the couch. In this study, the impact of conventional lok-bars for CT-simulation (CIVCO-bar) and treatment (iBEAM-bar) were compared with a novel lok-bar (mHM-bar) in tomotherapy. Verification was obtained as follows: i. artifacts in CT images; ii. dose attenuation rate of lok-bar, compared to without lok-bar; and iii. dose differences between the calculated and measured absorbed doses. With the CIVCO-bar, there were obvious metal artifacts, while there were nearly no artifacts with the mHM-bar. The mean dose attenuation rates with the mHM-bar and iBEAM-bar were 1.31% and 2.28%, and the mean dose difference was 1.55% and 1.66% for mHM-bar and iBEAM-bar. Using the mHM-bar reduced artifacts on the CT image and improved dose attenuation are obtained. The lok-bar needs to be inserted as a structure set in treatment planning with tomotherapy. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Analisis Sikap Konsumen terhadap Produk Fashion Lokal dan Impor

OpenAIRE

Setiawan, Evelyn

2014-01-01

Abstrak: Analisis Sikap Konsumen Terhadap Produk Fashion Lokal dan Impor. Penelitian ini bertujuan untuk menganalisis sikap konsumen terhadap produk fashion lokal dan impor yang akan berpengaruh terhadap keputusan konsumsi. Sampel yang akan digunakan dalam penelitian ini adalah 1.000 mahasiswa dari 10 perguruan tinggi swasta terbesar di Surabaya. Pengambilan data dilakukan dengan metode kuesioner. Hasil pengujian statistik menunjukkan bahwa sebagian besar mahasiswa di Surabaya merasa bangga d...

ANALISIS PENGENDALIAN KUALITAS PRODUKSI BOGIE BARBER S2HD 9C MENGGUNAKAN METODE LEAN SIX SIGMA DENGAN PENDEKATAN DMAIC (DEFINE, MEASURE, ANALYZE, IMPROVE, CONTROL STUDI KASUS DI PT BARATA INDONESIA (PERSERO GRESIK

Directory of Open Access Journals (Sweden)

Suparno Suparno

2017-01-01

Full Text Available Penelitian ini bertujuan untuk menganalisis pengendalian kualitas dan pemborosan yang terjadi dalam produksi side frame S2HD 9C menggunakan metode lean six sigma dengan pendekatan DMAIC di PT Barata Indonesia (Persero Gresik. Side frame S2HD 9C merupakan bagian dari produk bogie barber S2HD 9C. Penelitian ini pada tahap six sigma difokuskan pada analisis defect dan capaian sigma, sedangkan pada tahap lean six sigma difokuskan pada analisis waste dan capaian sigma. Data yang digunakan dalam penelitian ini ada 2 jenis yaitu data primer dan sekunder, yang bersifat kualitatif maupun kuantitatif. Data primer diperoleh dari observasi lapangan, sedangkan data sekunder diperoleh dari telaah dokumen. Dalam penelitian ini dilakukan sesuai dengan pendekatan DMAIC ( define, measure, analyze, improve, control . Setelah dilakukan analisis pada tahap six sigma diketahui terdapat 5 jenis defect yang terjadi pada periode Januari sampai April 2016. Yaitu: defect gas terperangkap 58.18%, defect core patah 21.82%, defect sand drop 12.73%, defect brake mould 5.46% dan defect misplace core 1.82%. Dan nilai capaian tingkat sigma dari masing-masing defect adalah sebagai berikut:  defect gas terperangkap 1235.71 DPMO dengan tingkat sigma 4.52σ, defect core patah 463.392 DPMO dengan tingkat sigma 4.81σ, defect sand drop 270.312 DPMO dengan tingkat sigma 4.96σ, defect brake mould 115.848 DPMO dengan tingkat sigma 5.18σ dan defect misplace core 38.616 DPMO dengan tingkat sigma 5.45σ. Dalam tahap lean six sigma diketahui terdapat 4 jenis waste, yaitu: waste defect product, waste waiting time (delay, waste transportation dan waste excess process. Berikut ini merupakan nilai capaian dari masing-masing waste: waste defect product 6890 DPMO dengan tingkat sigma 3.96σ dan nilai capability process 1.31 dengan tingkat sigma 3.94σ, waste waiting time (delay nilai capability process 1 dengan tingkat sigma 3σ, waste transportation nilai capability process 1.31 dengan tingkat

Effects of flexi-bar and non-flexi-bar exercises on trunk muscles activity in different postures in healthy adults.

Science.gov (United States)

Chung, Jun Sub; Park, Seol; Kim, JiYoung; Park, Ji Won

2015-07-01

[Purpose] The purpose of this study was to assess the effects of flexi-bar exercises and non-flexi-bar exercises on trunk muscle activity in different postures in healthy adults. [Subjects] Twenty healthy right-hand dominant adults (10 males and 10 females) were selected for this study. None of the participants had experienced any orthopedic problems in the spine or in the upper and lower extremities in the previous six months. [Methods] The subjects were instructed to adopt three exercise postures: posture 1, quadruped; posture 2, side-bridge; and posture 3, standing. Surface electromyography of selected trunk muscles was normalized to maximum voluntary isometric contraction. [Results] The external oblique, internal oblique, and erector spinae muscle activity showed significant differences between flexi-bar exercises and non-flexi-bar exercises. [Conclusion] The results of this study suggest that flexi-bar exercises are useful in the activation of trunk muscles.

Vibrations of a connecting system of curved bars, in-plane

International Nuclear Information System (INIS)

Suzuki, Katsuyoshi; Takahashi, Shin; Asakura, Akira.

1979-01-01

Piping systems were simulated with the combined bars with many kinds of curved and straight shapes. The system consists of straight bars and a circular arc bar, an elliptic arc bar and a catenary curved bar. The inplane vibration of a complicated bar system of any shape, which is indicated by two-dimensional center line, was analyzed strictly and simply, utilizing Lagrangean equation. The theoretical and analytical equations of vibration were derived, such as Lagrangean equation, Euler's equation, and those for bending moment, shearing force, tangential force, deformation, inclination, amplitude frequency, etc. The calculations were conducted on the U-shaped bars, namely the elliptic arc bar connected to straight bars and the catenary bar connected to straight bars, with the boundary condition of fixed ends. The analytical in-plane vibrating characteristics including natural frequency and vibration mode are shown. In the relating experiment, the frequency was measured with the U-shaped test pieces, changing the parameters of the length ratio of elliptic arc and straight part. Both ends were fixed. The test result showed that the vibration characteristics were consistent with the analytical result comparatively. This method is advantageous especially for complicated piping systems. The material and the cross section of bars were not varied in this analysis as the analytical condition. (Nakai, Y.)

Parameters determining efficiency and degradation of TiO2 vertical bar dye vertical bar CuI solar cells

International Nuclear Information System (INIS)

Sirimanne, P.M.; Tributsch, Helmut

2004-01-01

The influence of the micro-morphological structure of the TiO 2 film, the distribution of CuI in TiO 2 pores and the concentration of added surfactant in the CuI coating solution on the photocurrent of solid-state TiO 2 vertical bar dye vertical bar CuI solar cells was examined by space resolved photocurrent imaging technique. Iodine is found to be competing with the oxidized dye molecules in accepting electrons from CuI and decreases the efficiency of the cell. TiO 2 vertical bar dye vertical bar CuI cell degrade two hundred times faster than wet sensitization cells. This instability is considered to be due to the decomposition of the electron transfer-bridge between the sensitizer and CuI

ANALISIS RELEVANSI LULUSAN PERGURUAN TINGGI DENGAN DUNIA KERJA

Directory of Open Access Journals (Sweden)

Ali Muhson

2012-04-01

Full Text Available Abstract: A Relevance Analysis of University Graduates with World of Work. Education should be oriented to the competencies required by the workforce as a percentage of unemployment among the educated increase continuously. This study aims to examine the relevance of YSU Economic Education graduates. The study only focuses on the type of work and subjects taught. The subject of this study is the alumni of Economic Education Study Program. Sampling technique used is snowball sampling. Data collection technique using questionnaires and documentation while the technique of data analysis using descriptive analysis. The result suggests that the majority of the graduates find their first job as private a teacher, a private employee and a tutor, while current job of the most graduates are private teacher, private employee, and civil servant (teacher. The data shows that more than 50 percent of the graduates work in the education area. This implies that the relevance level based on the type of work is categorized as sufficient. Majority of the graduates teaches social science, economic, and entrepreneurship, hence it can be concluded that the relevance level based on the subjects taught is highly relevant.   Keyword: relevance of graduates, type of work, unemployment, employment     Abstrak: Analisis Relevansi Lulusan Perguruan Tinggi dengan Dunia Kerja. Pendidikan harus berorientasi pada kompetensi yang dibutuhkan oleh dunia kerja karena persentase penganggur di kalangan terdidik terus meningkat. Penelitian ini bertujuan untuk mengkaji tingkat relevansi (kesesuaian lulusan Pendidikan Ekonomi UNY. Kajian hanya diarahkan pada jenis pekerjaan dan mata pelajaran yang diampu. Penelitian ini mengambil subjek alumni Prodi Pendidikan Ekonomi dari berbagai angkatan. Teknik sampling yang digunakan adalah snowball sampling. Teknik pengumpulan data menggunakan angket dan dokumentasi sedangkan teknik analisis data menggunakan analisis deskriptif. Penelitian ini

INFLUENCING OF FRICTION IN HINGES FORCE SIZE OF BARS

Directory of Open Access Journals (Sweden)

BOHOMAZ V. N.

2016-04-01

Full Text Available Formulation of the problem. The size of critical force of bar on the traditional method of calculation is determined in supposition of ideal hinge in the place of fixing of bar. There are both a hinge resistance at the turn of bar ends and their moving in the real hinges. Thus, there is the necessity of influencing character determination of these hinge imperfections on the size of critical force. In the existent scientific labours is devoted the alike problems, influencing of friction in the hinges of bar fastening on the size of critical force was not taken into account. At determination of bars stability with no ideality of hinges friction in them it is possible to take into account by the eccentric appendix of loading or appendix of moment. However at such approach it is difficult enough to define the size of attached force or moment. Purpose. To set influencing of friction in the hinge of bar fastening on of his critical force size in sense of Euler, and also build dependences for determination of bar critical force taking into account mechanical descriptions of hinges materials. Conclusion. For the task of determination the size of bar critical force with the joint fastening on ends are got the dependences which take into account mechanical descriptions of material hinge. The received dependences allow to define more exact meaning of critical force for bars. The examples of calculation of whole bar and bar with undercuting in the middle are resulted that values of critical force, certain on a traditional method are overpriced.

50 CFR Figures 14a and 14b to Part... - Maximum Angle of Deflector Bars With Straight Bars Attached to the Bottom of the Frame and...

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Maximum Angle of Deflector Bars With Straight Bars Attached to the Bottom of the Frame and Maximum Angle of Deflector Bars With Bent Bars... 223—Maximum Angle of Deflector Bars With Straight Bars Attached to the Bottom of the Frame and Maximum...

ANALISIS KONTRIBUSI PAJAK HOTEL TERHADAP PENDAPATAN ASLI DAERAH KABUPATEN NUNUKAN

OpenAIRE

-, MULIATI

2014-01-01

2014 Analisis Kontribusi Pajak Hotel terhadap Pendapatan Asli Daerah Kabupaten Nunukan Analysis of The Contributions Tax on Hotel Againts Regional Renenue Nunukan District Muliati Haerial M. Christian Mangiwa Penelitian ini bertujuan untuk mengetahui seberapa besar kontribusi pajak hotel terhadap pendapatan asli daerah, mengetahui sistem pengawasan, dan potensi yang ada untuk meningkatkan pajak hotel, mengetahui sistem dan prosedur...

Measurement of |V{sub cb}| using {bar B}{sup 0} {yields} D*{sup +}{ell}{sup -}{bar {nu}}{sub {ell}} Decays

Energy Technology Data Exchange (ETDEWEB)

Della Ricca, Giuseppe

2003-08-12

A preliminary measurement of |V{sub cb}| and the branching fraction {Beta}({bar B}{sup 0} {yields} D*{sup +}{ell}{sup -}{bar {nu}}{sub {ell}}) has been performed based on a sample of about 55,700 {bar B}{sup 0} {yields} D*{sup +}{ell}{sup -}{bar {nu}}{sub {ell}} decays recorded with the BABAR detector. The decays are identified in the D*{sup +} {yields} D{sup 0}{pi}{sup +} final state, with the D{sup 0} reconstructed in three different decay modes. The differential decay rate is measured as a function of the relativistic boost of the D*{sup +} in the {bar B}{sup 0} rest frame. The value of the differential decay rate at ''zero recoil'', namely the point at which the D*{sup +} is at rest in the {bar B}{sup 0} frame, is predicted in Heavy Quark Effective Theory as a kinematic factor times F(1)|V{sub cb}|, where F is the unique form factor governing the decay. We extrapolate the measured differential decay rate to the zero recoil point and obtain F(1)|V{sub cb}| = (34.03 {+-} 0.24 {+-} 1.31) x 10{sup -3}. Using a theoretical calculation for F(1) we extract |V{sub cb}| = (37.27 {+-} 0.26(stat.) {+-} 1.43(syst.){sub -1.2}{sup +1.5}(theo.)) x 10{sup -3}. From the integrated decay rate we obtain {Beta}({bar B}{sup 0} {yields} D*{sup +}{ell}{sup -}{bar {nu}}{sub {ell}}) = (4.68 {+-} 0.03 {+-} 0.29)%.

Chemical enrichment in isolated barred spiral galaxies.

Science.gov (United States)

Martel, Hugo; Carles, Christian; Robichaud, Fidéle; Ellison, Sara L.; Williamson, David J.

2018-04-01

To investigate the role of bars in the chemical evolution of isolated disc galaxies, we performed a series of 39 gas dynamical simulations of isolated barred and unbarred galaxies with various masses, initial gas fractions, and AGN feedback models. The presence of a bar drives a substantial amount of gas toward the central region of the galaxy. In the most massive galaxies, this results in a violent starburst, followed by a drop in star formation resulting from gas exhaustion. The time delay between Type Ia and Type II supernovae explosions means that barred galaxies experience a rapid increase in [O/H] in the central region, and a much more gradual increase in [Fe/H]. In unbarred galaxies, star formation proceeds at a slow and steady rate, and oxygen and iron are produced at steady rates which are similar except for a time offset. Comparing the abundance ratios in barred and unbarred galaxies with the same central stellar mass M*, we find in barred galaxies an enhancement of 0.07 dex in [O/H], 0.05 dex in [Fe/H], and 0.05 dex in [O/Fe]. The [O/H] enhancement is in excellent agreement with observations from the SDSS. The initial gas fraction has very little effect on the abundance ratios in barred and unbarred galaxies, unless the galaxies experience a starburst. We considered AGN-host galaxies located near the bottom of the AGN regime, M* ≳ 3 × 1010M⊙, where AGN feedback dominates over supernovae feedback. We found that the impact of AGN feedback on the central abundances is marginal.

ANALISIS POTENSI DAN PROYEKSI PENERIMAAN RETRIBUSI PELAYANAN PASAR DI KABUPATEN SEMARANG

Directory of Open Access Journals (Sweden)

Evi Fatmawati

2017-06-01

Full Text Available Retribusi pelayanan pasar merupakan jenis retribusi jasa umum yang cukup potensial, dikarenakan Kabupaten Semarang menarik retribusi dari 33 pasar tradisional setiap harinya. Tujuan penelitian ini, untuk menganalisis potensi penerimaan retribusi pasar di Kabupaten Semarang tahun 2011 – 2015, serta memproyeksi pendapatan retribusi pelayanan pasar tahun 2016 – 2020. Penelitian ini menggunakan analisis kontribusi, analisis pertumbuhan, analisis potensi, dan analisis ARIMA (2,1,2 (Auto Regressive Integrated Moving Average. Hasil penelitian menunjukan: (1 kontribusi retribusi pelayanan pasar terhadap retribusi daerah dan PAD dalam kategori kurang dan sangat kurang, (2 pertumbuhan retribusi pelayanan pasar berfluktuasi, (3 penerimaan retribusi pelayanan pasar belum berdasarkan potensi, (4 target retribusi pelayanan pasar berada dibawah potensi, (5 proyeksi pendapatan retribusi pasar meningkat dalam lima tahun kedepan. Adanya selisih antara potensi dengan realisasi dapat dijadikan peluang oleh Pemerintah Daerah dalam memaksimalkan penerimaan retribusi pelayanan pasar. Saran peneliti yaitu penetapan target sesuai dengan potensi, serta peningkatan kualitas pelayanan pasar, hal tersebut diharapkan dapat meningkatkan sumbangan retribusi pelayanan pasar terhadap PAD di Kabupaten Semarang. Retribution as a source of local income had a great opportunity to be improve and be develop so. Market retribution service was a kind of public service retribution that potential enough, due to Semarang Regency managed and attracted the retribution of 33 traditional markets every day. The objective of this research was to analyze the potential and contribution of market retribution at Semarang Regency in 2011-2015, also approximate local market retribution service in 2016-2010. This research used contribution analysis, the growth analysis, potential analysis, and analyzed ARIMA (2,1,2 (Auto Regressive Integrated Moving Average. The results of this research that : (1

Measurement of the $t\\bar{t}Z$ and $t\\bar{t}W$ production cross sections in multilepton final states using 3.2 fb$^{-1}$ of $pp$ collisions at $\\sqrt{s}$ =13 TeV with the ATLAS detector

CERN Document Server

Aaboud, Morad; Abbott, Brad; Abdallah, Jalal; Abdinov, Ovsat; Abeloos, Baptiste; Aben, Rosemarie; AbouZeid, Ossama; Abraham, Nicola; Abramowicz, Halina; Abreu, Henso; Abreu, Ricardo; Abulaiti, Yiming; Acharya, Bobby Samir; Adamczyk, Leszek; Adams, David; Adelman, Jahred; Adomeit, Stefanie; Adye, Tim; Affolder, Tony; Agatonovic-Jovin, Tatjana; Agricola, Johannes; Aguilar-Saavedra, Juan Antonio; Ahlen, Steven; Ahmadov, Faig; Aielli, Giulio; Akerstedt, Henrik; Åkesson, Torsten Paul Ake; Akimov, Andrei; Alberghi, Gian Luigi; Albert, Justin; Albrand, Solveig; Alconada Verzini, Maria Josefina; Aleksa, Martin; Aleksandrov, Igor; Alexa, Calin; Alexander, Gideon; Alexopoulos, Theodoros; Alhroob, Muhammad; Ali, Babar; Aliev, Malik; Alimonti, Gianluca; Alison, John; Alkire, Steven Patrick; Allbrooke, Benedict; Allen, Benjamin William; Allport, Phillip; Aloisio, Alberto; Alonso, Alejandro; Alonso, Francisco; Alpigiani, Cristiano; Alstaty, Mahmoud; Alvarez Gonzalez, Barbara; Άlvarez Piqueras, Damián; Alviggi, Mariagrazia; Amadio, Brian Thomas; Amako, Katsuya; Amaral Coutinho, Yara; Amelung, Christoph; Amidei, Dante; Amor Dos Santos, Susana Patricia; Amorim, Antonio; Amoroso, Simone; Amundsen, Glenn; Anastopoulos, Christos; Ancu, Lucian Stefan; Andari, Nansi; Andeen, Timothy; Anders, Christoph Falk; Anders, Gabriel; Anders, John Kenneth; Anderson, Kelby; Andreazza, Attilio; Andrei, George Victor; Angelidakis, Stylianos; Angelozzi, Ivan; Anger, Philipp; Angerami, Aaron; Anghinolfi, Francis; Anisenkov, Alexey; Anjos, Nuno; Annovi, Alberto; Antel, Claire; Antonelli, Mario; Antonov, Alexey; Anulli, Fabio; Aoki, Masato; Aperio Bella, Ludovica; Arabidze, Giorgi; Arai, Yasuo; Araque, Juan Pedro; Arce, Ayana; Arduh, Francisco Anuar; Arguin, Jean-Francois; Argyropoulos, Spyridon; Arik, Metin; Armbruster, Aaron James; Armitage, Lewis James; Arnaez, Olivier; Arnold, Hannah; Arratia, Miguel; Arslan, Ozan; Artamonov, Andrei; Artoni, Giacomo; Artz, Sebastian; Asai, Shoji; Asbah, Nedaa; Ashkenazi, Adi; Åsman, Barbro; Asquith, Lily; Assamagan, Ketevi; Astalos, Robert; Atkinson, Markus; Atlay, Naim Bora; Augsten, Kamil; Avolio, Giuseppe; Axen, Bradley; Ayoub, Mohamad Kassem; Azuelos, Georges; Baak, Max; Baas, Alessandra; Baca, Matthew John; Bachacou, Henri; Bachas, Konstantinos; Backes, Moritz; Backhaus, Malte; Bagiacchi, Paolo; Bagnaia, Paolo; Bai, Yu; Baines, John; Baker, Oliver Keith; Baldin, Evgenii; Balek, Petr; Balestri, Thomas; Balli, Fabrice; Balunas, William Keaton; Banas, Elzbieta; Banerjee, Swagato; Bannoura, Arwa A E; Barak, Liron; Barberio, Elisabetta Luigia; Barberis, Dario; Barbero, Marlon; Barillari, Teresa; Barklow, Timothy; Barlow, Nick; Barnes, Sarah Louise; Barnett, Bruce; Barnett, Michael; Barnovska-Blenessy, Zuzana; Baroncelli, Antonio; Barone, Gaetano; Barr, Alan; Barranco Navarro, Laura; Barreiro, Fernando; Barreiro Guimarães da Costa, João; Bartoldus, Rainer; Barton, Adam Edward; Bartos, Pavol; Basalaev, Artem; Bassalat, Ahmed; Bates, Richard; Batista, Santiago Juan; Batley, Richard; Battaglia, Marco; Bauce, Matteo; Bauer, Florian; Bawa, Harinder Singh; Beacham, James; Beattie, Michael David; Beau, Tristan; Beauchemin, Pierre-Hugues; Bechtle, Philip; Beck, Hans~Peter; Becker, Kathrin; Becker, Maurice; Beckingham, Matthew; Becot, Cyril; Beddall, Andrew; Beddall, Ayda; Bednyakov, Vadim; Bedognetti, Matteo; Bee, Christopher; Beemster, Lars; Beermann, Thomas; Begel, Michael; Behr, Janna Katharina; Belanger-Champagne, Camille; Bell, Andrew Stuart; Bella, Gideon; Bellagamba, Lorenzo; Bellerive, Alain; Bellomo, Massimiliano; Belotskiy, Konstantin; Beltramello, Olga; Belyaev, Nikita; Benary, Odette; Benchekroun, Driss; Bender, Michael; Bendtz, Katarina; Benekos, Nektarios; Benhammou, Yan; Benhar Noccioli, Eleonora; Benitez, Jose; Benjamin, Douglas; Bensinger, James; Bentvelsen, Stan; Beresford, Lydia; Beretta, Matteo; Berge, David; Bergeaas Kuutmann, Elin; Berger, Nicolas; Beringer, Jürg; Berlendis, Simon; Bernard, Nathan Rogers; Bernius, Catrin; Bernlochner, Florian Urs; Berry, Tracey; Berta, Peter; Bertella, Claudia; Bertoli, Gabriele; Bertolucci, Federico; Bertram, Iain Alexander; Bertsche, Carolyn; Bertsche, David; Besjes, Geert-Jan; Bessidskaia Bylund, Olga; Bessner, Martin Florian; Besson, Nathalie; Betancourt, Christopher; Bethke, Siegfried; Bevan, Adrian John; Bhimji, Wahid; Bianchi, Riccardo-Maria; Bianchini, Louis; Bianco, Michele; Biebel, Otmar; Biedermann, Dustin; Bielski, Rafal; Biesuz, Nicolo Vladi; Biglietti, Michela; Bilbao De Mendizabal, Javier; Bilokon, Halina; Bindi, Marcello; Binet, Sebastien; Bingul, Ahmet; Bini, Cesare; Biondi, Silvia; Bjergaard, David Martin; Black, Curtis; Black, James; Black, Kevin; Blackburn, Daniel; Blair, Robert; Blanchard, Jean-Baptiste; Blanco, Jacobo Ezequiel; Blazek, Tomas; Bloch, Ingo; Blocker, Craig; Blum, Walter; Blumenschein, Ulrike; Blunier, Sylvain; Bobbink, Gerjan; Bobrovnikov, Victor; Bocchetta, Simona Serena; Bocci, Andrea; Bock, Christopher; Boehler, Michael; Boerner, Daniela; Bogaerts, Joannes Andreas; Bogavac, Danijela; Bogdanchikov, Alexander; Bohm, Christian; Boisvert, Veronique; Bokan, Petar; Bold, Tomasz; Boldyrev, Alexey; Bomben, Marco; Bona, Marcella; Boonekamp, Maarten; Borisov, Anatoly; Borissov, Guennadi; Bortfeldt, Jonathan; Bortoletto, Daniela; Bortolotto, Valerio; Bos, Kors; Boscherini, Davide; Bosman, Martine; Bossio Sola, Jonathan David; Boudreau, Joseph; Bouffard, Julian; Bouhova-Thacker, Evelina Vassileva; Boumediene, Djamel Eddine; Bourdarios, Claire; Boutle, Sarah Kate; Boveia, Antonio; Boyd, James; Boyko, Igor; Bracinik, Juraj; Brandt, Andrew; Brandt, Gerhard; Brandt, Oleg; Bratzler, Uwe; Brau, Benjamin; Brau, James; Braun, Helmut; Breaden Madden, William Dmitri; Brendlinger, Kurt; Brennan, Amelia Jean; Brenner, Lydia; Brenner, Richard; Bressler, Shikma; Bristow, Timothy Michael; Britton, Dave; Britzger, Daniel; Brochu, Frederic; Brock, Ian; Brock, Raymond; Brooijmans, Gustaaf; Brooks, Timothy; Brooks, William; Brosamer, Jacquelyn; Brost, Elizabeth; Broughton, James; Bruckman de Renstrom, Pawel; Bruncko, Dusan; Bruneliere, Renaud; Bruni, Alessia; Bruni, Graziano; Bruni, Lucrezia Stella; Brunt, Benjamin; Bruschi, Marco; Bruscino, Nello; Bryant, Patrick; Bryngemark, Lene; Buanes, Trygve; Buat, Quentin; Buchholz, Peter; Buckley, Andrew; Budagov, Ioulian; Buehrer, Felix; Bugge, Magnar Kopangen; Bulekov, Oleg; Bullock, Daniel; Burckhart, Helfried; Burdin, Sergey; Burgard, Carsten Daniel; Burghgrave, Blake; Burka, Klaudia; Burke, Stephen; Burmeister, Ingo; Burr, Jonathan Thomas Peter; Busato, Emmanuel; Büscher, Daniel; Büscher, Volker; Bussey, Peter; Butler, John; Buttar, Craig; Butterworth, Jonathan; Butti, Pierfrancesco; Buttinger, William; Buzatu, Adrian; Buzykaev, Aleksey; Cabrera Urbán, Susana; Caforio, Davide; Cairo, Valentina; Cakir, Orhan; Calace, Noemi; Calafiura, Paolo; Calandri, Alessandro; Calderini, Giovanni; Calfayan, Philippe; Caloba, Luiz; Calvente Lopez, Sergio; Calvet, David; Calvet, Samuel; Calvet, Thomas Philippe; Camacho Toro, Reina; Camarda, Stefano; Camarri, Paolo; Cameron, David; Caminal Armadans, Roger; Camincher, Clement; Campana, Simone; Campanelli, Mario; Camplani, Alessandra; Campoverde, Angel; Canale, Vincenzo; Canepa, Anadi; Cano Bret, Marc; Cantero, Josu; Cantrill, Robert; Cao, Tingting; Capeans Garrido, Maria Del Mar; Caprini, Irinel; Caprini, Mihai; Capua, Marcella; Caputo, Regina; Carbone, Ryne Michael; Cardarelli, Roberto; Cardillo, Fabio; Carli, Ina; Carli, Tancredi; Carlino, Gianpaolo; Carminati, Leonardo; Caron, Sascha; Carquin, Edson; Carrillo-Montoya, German D; Carter, Janet; Carvalho, João; Casadei, Diego; Casado, Maria Pilar; Casolino, Mirkoantonio; Casper, David William; Castaneda-Miranda, Elizabeth; Castelijn, Remco; Castelli, Angelantonio; Castillo Gimenez, Victoria; Castro, Nuno Filipe; Catinaccio, Andrea; Catmore, James; Cattai, Ariella; Caudron, Julien; Cavaliere, Viviana; Cavallaro, Emanuele; Cavalli, Donatella; Cavalli-Sforza, Matteo; Cavasinni, Vincenzo; Ceradini, Filippo; Cerda Alberich, Leonor; Cerio, Benjamin; Santiago Cerqueira, Augusto; Cerri, Alessandro; Cerrito, Lucio; Cerutti, Fabio; Cerv, Matevz; Cervelli, Alberto; Cetin, Serkant Ali; Chafaq, Aziz; Chakraborty, Dhiman; Chan, Stephen Kam-wah; Chan, Yat Long; Chang, Philip; Chapman, John Derek; Charlton, Dave; Chatterjee, Avishek; Chau, Chav Chhiv; Chavez Barajas, Carlos Alberto; Che, Siinn; Cheatham, Susan; Chegwidden, Andrew; Chekanov, Sergei; Chekulaev, Sergey; Chelkov, Gueorgui; Chelstowska, Magda Anna; Chen, Chunhui; Chen, Hucheng; Chen, Karen; Chen, Shenjian; Chen, Shion; Chen, Xin; Chen, Ye; Cheng, Hok Chuen; Cheng, Huajie; Cheng, Yangyang; Cheplakov, Alexander; Cheremushkina, Evgenia; Cherkaoui El Moursli, Rajaa; Chernyatin, Valeriy; Cheu, Elliott; Chevalier, Laurent; Chiarella, Vitaliano; Chiarelli, Giorgio; Chiodini, Gabriele; Chisholm, Andrew; Chitan, Adrian; Chizhov, Mihail; Choi, Kyungeon; Chomont, Arthur Rene; Chouridou, Sofia; Chow, Bonnie Kar Bo; Christodoulou, Valentinos; Chromek-Burckhart, Doris; Chudoba, Jiri; Chuinard, Annabelle Julia; Chwastowski, Janusz; Chytka, Ladislav; Ciapetti, Guido; Ciftci, Abbas Kenan; Cinca, Diane; Cindro, Vladimir; Cioara, Irina Antonela; Ciocca, Claudia; Ciocio, Alessandra; Cirotto, Francesco; Citron, Zvi Hirsh; Citterio, Mauro; Ciubancan, Mihai; Clark, Allan G; Clark, Brian Lee; Clark, Michael; Clark, Philip James; Clarke, Robert; Clement, Christophe; Coadou, Yann; Cobal, Marina; Coccaro, Andrea; Cochran, James H; Coffey, Laurel; Colasurdo, Luca; Cole, Brian; Colijn, Auke-Pieter; Collot, Johann; Colombo, Tommaso; Compostella, Gabriele; Conde Muiño, Patricia; Coniavitis, Elias; Connell, Simon Henry; Connelly, Ian; Consorti, Valerio; Constantinescu, Serban; Conti, Geraldine; Conventi, Francesco; Cooke, Mark; Cooper, Ben; Cooper-Sarkar, Amanda; Cormier, Kyle James Read; Cornelissen, Thijs; Corradi, Massimo; Corriveau, Francois; Corso-Radu, Alina; Cortes-Gonzalez, Arely; Cortiana, Giorgio; Costa, Giuseppe; Costa, María José; Costanzo, Davide; Cottin, Giovanna; Cowan, Glen; Cox, Brian; Cranmer, Kyle; Crawley, Samuel Joseph; Cree, Graham; Crépé-Renaudin, Sabine; Crescioli, Francesco; Cribbs, Wayne Allen; Crispin Ortuzar, Mireia; Cristinziani, Markus; Croft, Vince; Crosetti, Giovanni; Cuhadar Donszelmann, Tulay; Cummings, Jane; Curatolo, Maria; Cúth, Jakub; Cuthbert, Cameron; Czirr, Hendrik; Czodrowski, Patrick; D'amen, Gabriele; D'Auria, Saverio; D'Onofrio, Monica; Da Cunha Sargedas De Sousa, Mario Jose; Da Via, Cinzia; Dabrowski, Wladyslaw; Dado, Tomas; Dai, Tiesheng; Dale, Orjan; Dallaire, Frederick; Dallapiccola, Carlo; Dam, Mogens; Dandoy, Jeffrey Rogers; Dang, Nguyen Phuong; Daniells, Andrew Christopher; Dann, Nicholas Stuart; Danninger, Matthias; Dano Hoffmann, Maria; Dao, Valerio; Darbo, Giovanni; Darmora, Smita; Dassoulas, James; Dattagupta, Aparajita; Davey, Will; David, Claire; Davidek, Tomas; Davies, Merlin; Davison, Peter; Dawe, Edmund; Dawson, Ian; Daya-Ishmukhametova, Rozmin; De, Kaushik; de Asmundis, Riccardo; De Benedetti, Abraham; De Castro, Stefano; De Cecco, Sandro; De Groot, Nicolo; de Jong, Paul; De la Torre, Hector; De Lorenzi, Francesco; De Maria, Antonio; De Pedis, Daniele; De Salvo, Alessandro; De Sanctis, Umberto; De Santo, Antonella; De Vivie De Regie, Jean-Baptiste; Dearnaley, William James; Debbe, Ramiro; Debenedetti, Chiara; Dedovich, Dmitri; Dehghanian, Nooshin; Deigaard, Ingrid; Del Gaudio, Michela; Del Peso, Jose; Del Prete, Tarcisio; Delgove, David; Deliot, Frederic; Delitzsch, Chris Malena; Deliyergiyev, Maksym; Dell'Acqua, Andrea; Dell'Asta, Lidia; Dell'Orso, Mauro; Della Pietra, Massimo; della Volpe, Domenico; Delmastro, Marco; Delsart, Pierre-Antoine; DeMarco, David; Demers, Sarah; Demichev, Mikhail; Demilly, Aurelien; Denisov, Sergey; Denysiuk, Denys; Derendarz, Dominik; Derkaoui, Jamal Eddine; Derue, Frederic; Dervan, Paul; Desch, Klaus Kurt; Deterre, Cecile; Dette, Karola; Deviveiros, Pier-Olivier; Dewhurst, Alastair; Dhaliwal, Saminder; Di Ciaccio, Anna; Di Ciaccio, Lucia; Di Clemente, William Kennedy; Di Donato, Camilla; Di Girolamo, Alessandro; Di Girolamo, Beniamino; Di Micco, Biagio; Di Nardo, Roberto; Di Simone, Andrea; Di Sipio, Riccardo; Di Valentino, David; Diaconu, Cristinel; Diamond, Miriam; Dias, Flavia; Diaz, Marco Aurelio; Diehl, Edward; Dietrich, Janet; Diglio, Sara; Dimitrievska, Aleksandra; Dingfelder, Jochen; Dita, Petre; Dita, Sanda; Dittus, Fridolin; Djama, Fares; Djobava, Tamar; Djuvsland, Julia Isabell; Barros do Vale, Maria Aline; Dobos, Daniel; Dobre, Monica; Doglioni, Caterina; Dohmae, Takeshi; Dolejsi, Jiri; Dolezal, Zdenek; Dolgoshein, Boris; Donadelli, Marisilvia; Donati, Simone; Dondero, Paolo; Donini, Julien; Dopke, Jens; Doria, Alessandra; Dova, Maria-Teresa; Doyle, Tony; Drechsler, Eric; Dris, Manolis; Du, Yanyan; Duarte-Campderros, Jorge; Duchovni, Ehud; Duckeck, Guenter; Ducu, Otilia Anamaria; Duda, Dominik; Dudarev, Alexey; Duffield, Emily Marie; Duflot, Laurent; Duguid, Liam; Dührssen, Michael; Dumancic, Mirta; Dunford, Monica; Duran Yildiz, Hatice; Düren, Michael; Durglishvili, Archil; Duschinger, Dirk; Dutta, Baishali; Dyndal, Mateusz; Eckardt, Christoph; Ecker, Katharina Maria; Edgar, Ryan Christopher; Edwards, Nicholas Charles; Eifert, Till; Eigen, Gerald; Einsweiler, Kevin; Ekelof, Tord; El Kacimi, Mohamed; Ellajosyula, Venugopal; Ellert, Mattias; Elles, Sabine; Ellinghaus, Frank; Elliot, Alison; Ellis, Nicolas; Elmsheuser, Johannes; Elsing, Markus; Emeliyanov, Dmitry; Enari, Yuji; Endner, Oliver Chris; Endo, Masaki; Ennis, Joseph Stanford; Erdmann, Johannes; Ereditato, Antonio; Ernis, Gunar; Ernst, Jesse; Ernst, Michael; Errede, Steven; Ertel, Eugen; Escalier, Marc; Esch, Hendrik; Escobar, Carlos; Esposito, Bellisario; Etienvre, Anne-Isabelle; Etzion, Erez; Evans, Hal; Ezhilov, Alexey; Fabbri, Federica; Fabbri, Laura; Facini, Gabriel; Fakhrutdinov, Rinat; Falciano, Speranza; Falla, Rebecca Jane; Faltova, Jana; Fang, Yaquan; Fanti, Marcello; Farbin, Amir; Farilla, Addolorata; Farina, Christian; Farina, Edoardo Maria; Farooque, Trisha; Farrell, Steven; Farrington, Sinead; Farthouat, Philippe; Fassi, Farida; Fassnacht, Patrick; Fassouliotis, Dimitrios; Faucci Giannelli, Michele; Favareto, Andrea; Fawcett, William James; Fayard, Louis; Fedin, Oleg; Fedorko, Wojciech; Feigl, Simon; Feligioni, Lorenzo; Feng, Cunfeng; Feng, Eric; Feng, Haolu; Fenyuk, Alexander; Feremenga, Last; Fernandez Martinez, Patricia; Fernandez Perez, Sonia; Ferrando, James; Ferrari, Arnaud; Ferrari, Pamela; Ferrari, Roberto; Ferreira de Lima, Danilo Enoque; Ferrer, Antonio; Ferrere, Didier; Ferretti, Claudio; Ferretto Parodi, Andrea; Fiedler, Frank; Filipčič, Andrej; Filipuzzi, Marco; Filthaut, Frank; Fincke-Keeler, Margret; Finelli, Kevin Daniel; Fiolhais, Miguel; Fiorini, Luca; Firan, Ana; Fischer, Adam; Fischer, Cora; Fischer, Julia; Fisher, Wade Cameron; Flaschel, Nils; Fleck, Ivor; Fleischmann, Philipp; Fletcher, Gareth Thomas; Fletcher, Rob Roy MacGregor; Flick, Tobias; Floderus, Anders; Flores Castillo, Luis; Flowerdew, Michael; Forcolin, Giulio Tiziano; Formica, Andrea; Forti, Alessandra; Foster, Andrew Geoffrey; Fournier, Daniel; Fox, Harald; Fracchia, Silvia; Francavilla, Paolo; Franchini, Matteo; Francis, David; Franconi, Laura; Franklin, Melissa; Frate, Meghan; Fraternali, Marco; Freeborn, David; Fressard-Batraneanu, Silvia; Friedrich, Felix; Froidevaux, Daniel; Frost, James; Fukunaga, Chikara; Fullana Torregrosa, Esteban; Fusayasu, Takahiro; Fuster, Juan; Gabaldon, Carolina; Gabizon, Ofir; Gabrielli, Alessandro; Gabrielli, Andrea; Gach, Grzegorz; Gadatsch, Stefan; Gadomski, Szymon; Gagliardi, Guido; Gagnon, Louis Guillaume; Gagnon, Pauline; Galea, Cristina; Galhardo, Bruno; Gallas, Elizabeth; Gallop, Bruce; Gallus, Petr; Galster, Gorm Aske Gram Krohn; Gan, KK; Gao, Jun; Gao, Yanyan; Gao, Yongsheng; Garay Walls, Francisca; García, Carmen; García Navarro, José Enrique; Garcia-Sciveres, Maurice; Gardner, Robert; Garelli, Nicoletta; Garonne, Vincent; Gascon Bravo, Alberto; Gatti, Claudio; Gaudiello, Andrea; Gaudio, Gabriella; Gaur, Bakul; Gauthier, Lea; Gavrilenko, Igor; Gay, Colin; Gaycken, Goetz; Gazis, Evangelos; Gecse, Zoltan; Gee, Norman; Geich-Gimbel, Christoph; Geisen, Marc; Geisler, Manuel Patrice; Gemme, Claudia; Genest, Marie-Hélène; Geng, Cong; Gentile, Simonetta; George, Simon; Gerbaudo, Davide; Gershon, Avi; Ghasemi, Sara; Ghazlane, Hamid; Ghneimat, Mazuza; Giacobbe, Benedetto; Giagu, Stefano; Giannetti, Paola; Gibbard, Bruce; Gibson, Stephen; Gignac, Matthew; Gilchriese, Murdock; Gillam, Thomas; Gillberg, Dag; Gilles, Geoffrey; Gingrich, Douglas; Giokaris, Nikos; Giordani, MarioPaolo; Giorgi, Filippo Maria; Giorgi, Francesco Michelangelo; Giraud, Pierre-Francois; Giromini, Paolo; Giugni, Danilo; Giuli, Francesco; Giuliani, Claudia; Giulini, Maddalena; Gjelsten, Børge Kile; Gkaitatzis, Stamatios; Gkialas, Ioannis; Gkougkousis, Evangelos Leonidas; Gladilin, Leonid; Glasman, Claudia; Glatzer, Julian; Glaysher, Paul; Glazov, Alexandre; Goblirsch-Kolb, Maximilian; Godlewski, Jan; Goldfarb, Steven; Golling, Tobias; Golubkov, Dmitry; Gomes, Agostinho; Gonçalo, Ricardo; Goncalves Pinto Firmino Da Costa, Joao; Gonella, Giulia; Gonella, Laura; Gongadze, Alexi; González de la Hoz, Santiago; Gonzalez Parra, Garoe; Gonzalez-Sevilla, Sergio; Goossens, Luc; Gorbounov, Petr Andreevich; Gordon, Howard; Gorelov, Igor; Gorini, Benedetto; Gorini, Edoardo; Gorišek, Andrej; Gornicki, Edward; Goshaw, Alfred; Gössling, Claus; Gostkin, Mikhail Ivanovitch; Goudet, Christophe Raymond; Goujdami, Driss; Goussiou, Anna; Govender, Nicolin; Gozani, Eitan; Graber, Lars; Grabowska-Bold, Iwona; Gradin, Per Olov Joakim; Grafström, Per; Gramling, Johanna; Gramstad, Eirik; Grancagnolo, Sergio; Gratchev, Vadim; Gravila, Paul Mircea; Gray, Heather; Graziani, Enrico; Greenwood, Zeno Dixon; Grefe, Christian; Gregersen, Kristian; Gregor, Ingrid-Maria; Grenier, Philippe; Grevtsov, Kirill; Griffiths, Justin; Grillo, Alexander; Grimm, Kathryn; Grinstein, Sebastian; Gris, Philippe Luc Yves; Grivaz, Jean-Francois; Groh, Sabrina; Grohs, Johannes Philipp; Gross, Eilam; Grosse-Knetter, Joern; Grossi, Giulio Cornelio; Grout, Zara Jane; Guan, Liang; Guan, Wen; Guenther, Jaroslav; Guescini, Francesco; Guest, Daniel; Gueta, Orel; Guido, Elisa; Guillemin, Thibault; Guindon, Stefan; Gul, Umar; Gumpert, Christian; Guo, Jun; Guo, Yicheng; Gupta, Shaun; Gustavino, Giuliano; Gutierrez, Phillip; Gutierrez Ortiz, Nicolas Gilberto; Gutschow, Christian; Guyot, Claude; Gwenlan, Claire; Gwilliam, Carl; Haas, Andy; Haber, Carl; Hadavand, Haleh Khani; Haddad, Nacim; Hadef, Asma; Haefner, Petra; Hageböck, Stephan; Hajduk, Zbigniew; Hakobyan, Hrachya; Haleem, Mahsana; Haley, Joseph; Halladjian, Garabed; Hallewell, Gregory David; Hamacher, Klaus; Hamal, Petr; Hamano, Kenji; Hamilton, Andrew; Hamity, Guillermo Nicolas; Hamnett, Phillip George; Han, Liang; Hanagaki, Kazunori; Hanawa, Keita; Hance, Michael; Haney, Bijan; Hanke, Paul; Hanna, Remie; Hansen, Jørgen Beck; Hansen, Jorn Dines; Hansen, Maike Christina; Hansen, Peter Henrik; Hara, Kazuhiko; Hard, Andrew; Harenberg, Torsten; Hariri, Faten; Harkusha, Siarhei; Harrington, Robert; Harrison, Paul Fraser; Hartjes, Fred; Hartmann, Nikolai Marcel; Hasegawa, Makoto; Hasegawa, Yoji; Hasib, A; Hassani, Samira; Haug, Sigve; Hauser, Reiner; Hauswald, Lorenz; Havranek, Miroslav; Hawkes, Christopher; Hawkings, Richard John; Hayden, Daniel; Hays, Chris; Hays, Jonathan Michael; Hayward, Helen; Haywood, Stephen; Head, Simon; Heck, Tobias; Hedberg, Vincent; Heelan, Louise; Heim, Sarah; Heim, Timon; Heinemann, Beate; Heinrich, Jochen Jens; Heinrich, Lukas; Heinz, Christian; Hejbal, Jiri; Helary, Louis; Hellman, Sten; Helsens, Clement; Henderson, James; Henderson, Robert; Heng, Yang; Henkelmann, Steffen; Henriques Correia, Ana Maria; Henrot-Versille, Sophie; Herbert, Geoffrey Henry; Hernández Jiménez, Yesenia; Herten, Gregor; Hertenberger, Ralf; Hervas, Luis; Hesketh, Gavin Grant; Hessey, Nigel; Hetherly, Jeffrey Wayne; Hickling, Robert; Higón-Rodriguez, Emilio; Hill, Ewan; Hill, John; Hiller, Karl Heinz; Hillier, Stephen; Hinchliffe, Ian; Hines, Elizabeth; Hinman, Rachel Reisner; Hirose, Minoru; Hirschbuehl, Dominic; Hobbs, John; Hod, Noam; Hodgkinson, Mark; Hodgson, Paul; Hoecker, Andreas; Hoeferkamp, Martin; Hoenig, Friedrich; Hohn, David; Holmes, Tova Ray; Homann, Michael; Hong, Tae Min; Hooberman, Benjamin Henry; Hopkins, Walter; Horii, Yasuyuki; Horton, Arthur James; Hostachy, Jean-Yves; Hou, Suen; Hoummada, Abdeslam; Howarth, James; Hrabovsky, Miroslav; Hristova, Ivana; Hrivnac, Julius; Hryn'ova, Tetiana; Hrynevich, Aliaksei; Hsu, Catherine; Hsu, Pai-hsien Jennifer; Hsu, Shih-Chieh; Hu, Diedi; Hu, Qipeng; Huang, Yanping; Hubacek, Zdenek; Hubaut, Fabrice; Huegging, Fabian; Huffman, Todd Brian; Hughes, Emlyn; Hughes, Gareth; Huhtinen, Mika; Huo, Peng; Huseynov, Nazim; Huston, Joey; Huth, John; Iacobucci, Giuseppe; Iakovidis, Georgios; Ibragimov, Iskander; Iconomidou-Fayard, Lydia; Ideal, Emma; Idrissi, Zineb; Iengo, Paolo; Igonkina, Olga; Iizawa, Tomoya; Ikegami, Yoichi; Ikeno, Masahiro; Ilchenko, Yuriy; Iliadis, Dimitrios; Ilic, Nikolina; Ince, Tayfun; Introzzi, Gianluca; Ioannou, Pavlos; Iodice, Mauro; Iordanidou, Kalliopi; Ippolito, Valerio; Ishijima, Naoki; Ishino, Masaya; Ishitsuka, Masaki; Ishmukhametov, Renat; Issever, Cigdem; Istin, Serhat; Ito, Fumiaki; Iturbe Ponce, Julia Mariana; Iuppa, Roberto; Iwanski, Wieslaw; Iwasaki, Hiroyuki; Izen, Joseph; Izzo, Vincenzo; Jabbar, Samina; Jackson, Brett; Jackson, Matthew; Jackson, Paul; Jain, Vivek; Jakobi, Katharina Bianca; Jakobs, Karl; Jakobsen, Sune; Jakoubek, Tomas; Jamin, David Olivier; Jana, Dilip; Jansen, Eric; Jansky, Roland; Janssen, Jens; Janus, Michel; Jarlskog, Göran; Javadov, Namig; Javůrek, Tomáš; Jeanneau, Fabien; Jeanty, Laura; Jeng, Geng-yuan; Jennens, David; Jenni, Peter; Jentzsch, Jennifer; Jeske, Carl; Jézéquel, Stéphane; Ji, Haoshuang; Jia, Jiangyong; Jiang, Hai; Jiang, Yi; Jiggins, Stephen; Jimenez Pena, Javier; Jin, Shan; Jinaru, Adam; Jinnouchi, Osamu; Johansson, Per; Johns, Kenneth; Johnson, William Joseph; Jon-And, Kerstin; Jones, Graham; Jones, Roger; Jones, Sarah; Jones, Tim; Jongmanns, Jan; Jorge, Pedro; Jovicevic, Jelena; Ju, Xiangyang; Juste Rozas, Aurelio; Köhler, Markus Konrad; Kaczmarska, Anna; Kado, Marumi; Kagan, Harris; Kagan, Michael; Kahn, Sebastien Jonathan; Kajomovitz, Enrique; Kalderon, Charles William; Kaluza, Adam; Kama, Sami; Kamenshchikov, Andrey; Kanaya, Naoko; Kaneti, Steven; Kanjir, Luka; Kantserov, Vadim; Kanzaki, Junichi; Kaplan, Benjamin; Kaplan, Laser Seymour; Kapliy, Anton; Kar, Deepak; Karakostas, Konstantinos; Karamaoun, Andrew; Karastathis, Nikolaos; Kareem, Mohammad Jawad; Karentzos, Efstathios; Karnevskiy, Mikhail; Karpov, Sergey; Karpova, Zoya; Karthik, Krishnaiyengar; Kartvelishvili, Vakhtang; Karyukhin, Andrey; Kasahara, Kota; Kashif, Lashkar; Kass, Richard; Kastanas, Alex; Kataoka, Yousuke; Kato, Chikuma; Katre, Akshay; Katzy, Judith; Kawade, Kentaro; Kawagoe, Kiyotomo; Kawamoto, Tatsuo; Kawamura, Gen; Kazama, Shingo; Kazanin, Vassili; Keeler, Richard; Kehoe, Robert; Keller, John; Kempster, Jacob Julian; Keoshkerian, Houry; Kepka, Oldrich; Kerševan, Borut Paul; Kersten, Susanne; Keyes, Robert; Khader, Mazin; Khalil-zada, Farkhad; Khanov, Alexander; Kharlamov, Alexey; Khoo, Teng Jian; Khovanskiy, Valery; Khramov, Evgeniy; Khubua, Jemal; Kido, Shogo; Kim, Hee Yeun; Kim, Shinhong; Kim, Young-Kee; Kimura, Naoki; Kind, Oliver Maria; King, Barry; King, Matthew; King, Samuel Burton; Kirk, Julie; Kiryunin, Andrey; Kishimoto, Tomoe; Kisielewska, Danuta; Kiss, Florian; Kiuchi, Kenji; Kivernyk, Oleh; Kladiva, Eduard; Klein, Matthew Henry; Klein, Max; Klein, Uta; Kleinknecht, Konrad; Klimek, Pawel; Klimentov, Alexei; Klingenberg, Reiner; Klinger, Joel Alexander; Klioutchnikova, Tatiana; Kluge, Eike-Erik; Kluit, Peter; Kluth, Stefan; Knapik, Joanna; Kneringer, Emmerich; Knoops, Edith; Knue, Andrea; Kobayashi, Aine; Kobayashi, Dai; Kobayashi, Tomio; Kobel, Michael; Kocian, Martin; Kodys, Peter; Koffas, Thomas; Koffeman, Els; Koi, Tatsumi; Kolanoski, Hermann; Kolb, Mathis; Koletsou, Iro; Komar, Aston; Komori, Yuto; Kondo, Takahiko; Kondrashova, Nataliia; Köneke, Karsten; König, Adriaan; Kono, Takanori; Konoplich, Rostislav; Konstantinidis, Nikolaos; Kopeliansky, Revital; Koperny, Stefan; Köpke, Lutz; Kopp, Anna Katharina; Korcyl, Krzysztof; Kordas, Kostantinos; Korn, Andreas; Korol, Aleksandr; Korolkov, Ilya; Korolkova, Elena; Kortner, Oliver; Kortner, Sandra; Kosek, Tomas; Kostyukhin, Vadim; Kotwal, Ashutosh; Kourkoumeli-Charalampidi, Athina; Kourkoumelis, Christine; Kouskoura, Vasiliki; Kowalewska, Anna Bozena; Kowalewski, Robert Victor; Kowalski, Tadeusz; Kozakai, Chihiro; Kozanecki, Witold; Kozhin, Anatoly; Kramarenko, Viktor; Kramberger, Gregor; Krasnopevtsev, Dimitriy; Krasny, Mieczyslaw Witold; Krasznahorkay, Attila; Kraus, Jana; Kravchenko, Anton; Kretz, Moritz; Kretzschmar, Jan; Kreutzfeldt, Kristof; Krieger, Peter; Krizka, Karol; Kroeninger, Kevin; Kroha, Hubert; Kroll, Joe; Kroseberg, Juergen; Krstic, Jelena; Kruchonak, Uladzimir; Krüger, Hans; Krumnack, Nils; Kruse, Amanda; Kruse, Mark; Kruskal, Michael; Kubota, Takashi; Kucuk, Hilal; Kuday, Sinan; Kuechler, Jan Thomas; Kuehn, Susanne; Kugel, Andreas; Kuger, Fabian; Kuhl, Andrew; Kuhl, Thorsten; Kukhtin, Victor; Kukla, Romain; Kulchitsky, Yuri; Kuleshov, Sergey; Kuna, Marine; Kunigo, Takuto; Kupco, Alexander; Kurashige, Hisaya; Kurochkin, Yurii; Kus, Vlastimil; Kuwertz, Emma Sian; Kuze, Masahiro; Kvita, Jiri; Kwan, Tony; Kyriazopoulos, Dimitrios; La Rosa, Alessandro; La Rosa Navarro, Jose Luis; La Rotonda, Laura; Lacasta, Carlos; Lacava, Francesco; Lacey, James; Lacker, Heiko; Lacour, Didier; Lacuesta, Vicente Ramón; Ladygin, Evgueni; Lafaye, Remi; Laforge, Bertrand; Lagouri, Theodota; Lai, Stanley; Lammers, Sabine; Lampl, Walter; Lançon, Eric; Landgraf, Ulrich; Landon, Murrough; Lang, Valerie Susanne; Lange, J örn Christian; Lankford, Andrew; Lanni, Francesco; Lantzsch, Kerstin; Lanza, Agostino; Laplace, Sandrine; Lapoire, Cecile; Laporte, Jean-Francois; Lari, Tommaso; Lasagni Manghi, Federico; Lassnig, Mario; Laurelli, Paolo; Lavrijsen, Wim; Law, Alexander; Laycock, Paul; Lazovich, Tomo; Lazzaroni, Massimo; Le, Brian; Le Dortz, Olivier; Le Guirriec, Emmanuel; Le Quilleuc, Eloi; LeBlanc, Matthew Edgar; LeCompte, Thomas; Ledroit-Guillon, Fabienne Agnes Marie; Lee, Claire Alexandra; Lee, Shih-Chang; Lee, Lawrence; Lefebvre, Guillaume; Lefebvre, Michel; Legger, Federica; Leggett, Charles; Lehan, Allan; Lehmann Miotto, Giovanna; Lei, Xiaowen; Leight, William Axel; Leisos, Antonios; Leister, Andrew Gerard; Leite, Marco Aurelio Lisboa; Leitner, Rupert; Lellouch, Daniel; Lemmer, Boris; Leney, Katharine; Lenz, Tatjana; Lenzi, Bruno; Leone, Robert; Leone, Sandra; Leonidopoulos, Christos; Leontsinis, Stefanos; Lerner, Giuseppe; Leroy, Claude; Lesage, Arthur; Lester, Christopher; Levchenko, Mikhail; Levêque, Jessica; Levin, Daniel; Levinson, Lorne; Levy, Mark; Lewis, Dave; Leyko, Agnieszka; Leyton, Michael; Li, Bing; Li, Haifeng; Li, Ho Ling; Li, Lei; Li, Liang; Li, Qi; Li, Shu; Li, Xingguo; Li, Yichen; Liang, Zhijun; Liberti, Barbara; Liblong, Aaron; Lichard, Peter; Lie, Ki; Liebal, Jessica; Liebig, Wolfgang; Limosani, Antonio; Lin, Simon; Lin, Tai-Hua; Lindquist, Brian Edward; Lionti, Anthony Eric; Lipeles, Elliot; Lipniacka, Anna; Lisovyi, Mykhailo; Liss, Tony; Lister, Alison; Litke, Alan; Liu, Bo; Liu, Dong; Liu, Hao; Liu, Hongbin; Liu, Jian; Liu, Jianbei; Liu, Kun; Liu, Lulu; Liu, Miaoyuan; Liu, Minghui; Liu, Yanlin; Liu, Yanwen; Livan, Michele; Lleres, Annick; Llorente Merino, Javier; Lloyd, Stephen; Lo Sterzo, Francesco; Lobodzinska, Ewelina Maria; Loch, Peter; Lockman, William; Loebinger, Fred; Loevschall-Jensen, Ask Emil; Loew, Kevin Michael; Loginov, Andrey; Lohse, Thomas; Lohwasser, Kristin; Lokajicek, Milos; Long, Brian Alexander; Long, Jonathan David; Long, Robin Eamonn; Longo, Luigi; Looper, Kristina Anne; Lopes, Lourenco; Lopez Mateos, David; Lopez Paredes, Brais; Lopez Paz, Ivan; Lopez Solis, Alvaro; Lorenz, Jeanette; Lorenzo Martinez, Narei; Losada, Marta; Lösel, Philipp Jonathan; Lou, XinChou; Lounis, Abdenour; Love, Jeremy; Love, Peter; Lu, Haonan; Lu, Nan; Lubatti, Henry; Luci, Claudio; Lucotte, Arnaud; Luedtke, Christian; Luehring, Frederick; Lukas, Wolfgang; Luminari, Lamberto; Lundberg, Olof; Lund-Jensen, Bengt; Luzi, Pierre Marc; Lynn, David; Lysak, Roman; Lytken, Else; Lyubushkin, Vladimir; Ma, Hong; Ma, Lian Liang; Ma, Yanhui; Maccarrone, Giovanni; Macchiolo, Anna; Macdonald, Calum Michael; Maček, Boštjan; Machado Miguens, Joana; Madaffari, Daniele; Madar, Romain; Maddocks, Harvey Jonathan; Mader, Wolfgang; Madsen, Alexander; Maeda, Junpei; Maeland, Steffen; Maeno, Tadashi; Maevskiy, Artem; Magradze, Erekle; Mahlstedt, Joern; Maiani, Camilla; Maidantchik, Carmen; Maier, Andreas Alexander; Maier, Thomas; Maio, Amélia; Majewski, Stephanie; Makida, Yasuhiro; Makovec, Nikola; Malaescu, Bogdan; Malecki, Pawel; Maleev, Victor; Malek, Fairouz; Mallik, Usha; Malon, David; Malone, Caitlin; Maltezos, Stavros; Malyukov, Sergei; Mamuzic, Judita; Mancini, Giada; Mandelli, Beatrice; Mandelli, Luciano; Mandić, Igor; Maneira, José; Manhaes de Andrade Filho, Luciano; Manjarres Ramos, Joany; Mann, Alexander; Manousos, Athanasios; Mansoulie, Bruno; Mansour, Jason Dhia; Mantifel, Rodger; Mantoani, Matteo; Manzoni, Stefano; Mapelli, Livio; Marceca, Gino; March, Luis; Marchiori, Giovanni; Marcisovsky, Michal; Marjanovic, Marija; Marley, Daniel; Marroquim, Fernando; Marsden, Stephen Philip; Marshall, Zach; Marti-Garcia, Salvador; Martin, Brian Thomas; Martin, Tim; Martin, Victoria Jane; Martin dit Latour, Bertrand; Martinez, Mario; Martinez Outschoorn, Verena; Martin-Haugh, Stewart; Martoiu, Victor Sorin; Martyniuk, Alex; Marx, Marilyn; Marzin, Antoine; Masetti, Lucia; Mashimo, Tetsuro; Mashinistov, Ruslan; Masik, Jiri; Maslennikov, Alexey; Massa, Ignazio; Massa, Lorenzo; Mastrandrea, Paolo; Mastroberardino, Anna; Masubuchi, Tatsuya; Mättig, Peter; Mattmann, Johannes; Maurer, Julien; Maxfield, Stephen; Maximov, Dmitriy; Mazini, Rachid; Mazza, Simone Michele; Mc Fadden, Neil Christopher; Mc Goldrick, Garrin; Mc Kee, Shawn Patrick; McCarn, Allison; McCarthy, Robert; McCarthy, Tom; McClymont, Laurie; McDonald, Emily; McFarlane, Kenneth; Mcfayden, Josh; Mchedlidze, Gvantsa; McMahon, Steve; McPherson, Robert; Medinnis, Michael; Meehan, Samuel; Mehlhase, Sascha; Mehta, Andrew; Meier, Karlheinz; Meineck, Christian; Meirose, Bernhard; Melini, Davide; Mellado Garcia, Bruce Rafael; Melo, Matej; Meloni, Federico; Mengarelli, Alberto; Menke, Sven; Meoni, Evelin; Mergelmeyer, Sebastian; Mermod, Philippe; Merola, Leonardo; Meroni, Chiara; Merritt, Frank; Messina, Andrea; Metcalfe, Jessica; Mete, Alaettin Serhan; Meyer, Carsten; Meyer, Christopher; Meyer, Jean-Pierre; Meyer, Jochen; Meyer Zu Theenhausen, Hanno; Miano, Fabrizio; Middleton, Robin; Miglioranzi, Silvia; Mijović, Liza; Mikenberg, Giora; Mikestikova, Marcela; Mikuž, Marko; Milesi, Marco; Milic, Adriana; Miller, David; Mills, Corrinne; Milov, Alexander; Milstead, David; Minaenko, Andrey; Minami, Yuto; Minashvili, Irakli; Mincer, Allen; Mindur, Bartosz; Mineev, Mikhail; Ming, Yao; Mir, Lluisa-Maria; Mistry, Khilesh; Mitani, Takashi; Mitrevski, Jovan; Mitsou, Vasiliki A; Miucci, Antonio; Miyagawa, Paul; Mjörnmark, Jan-Ulf; Moa, Torbjoern; Mochizuki, Kazuya; Mohapatra, Soumya; Molander, Simon; Moles-Valls, Regina; Monden, Ryutaro; Mondragon, Matthew Craig; Mönig, Klaus; Monk, James; Monnier, Emmanuel; Montalbano, Alyssa; Montejo Berlingen, Javier; Monticelli, Fernando; Monzani, Simone; Moore, Roger; Morange, Nicolas; Moreno, Deywis; Moreno Llácer, María; Morettini, Paolo; Morgenstern, Stefanie; Mori, Daniel; Mori, Tatsuya; Morii, Masahiro; Morinaga, Masahiro; Morisbak, Vanja; Moritz, Sebastian; Morley, Anthony Keith; Mornacchi, Giuseppe; Morris, John; Mortensen, Simon Stark; Morvaj, Ljiljana; Mosidze, Maia; Moss, Josh; Motohashi, Kazuki; Mount, Richard; Mountricha, Eleni; Mouraviev, Sergei; Moyse, Edward; Muanza, Steve; Mudd, Richard; Mueller, Felix; Mueller, James; Mueller, Ralph Soeren Peter; Mueller, Thibaut; Muenstermann, Daniel; Mullen, Paul; Mullier, Geoffrey; Munoz Sanchez, Francisca Javiela; Murillo Quijada, Javier Alberto; Murray, Bill; Musheghyan, Haykuhi; Muškinja, Miha; Myagkov, Alexey; Myska, Miroslav; Nachman, Benjamin Philip; Nackenhorst, Olaf; Nagai, Koichi; Nagai, Ryo; Nagano, Kunihiro; Nagasaka, Yasushi; Nagata, Kazuki; Nagel, Martin; Nagy, Elemer; Nairz, Armin Michael; Nakahama, Yu; Nakamura, Koji; Nakamura, Tomoaki; Nakano, Itsuo; Namasivayam, Harisankar; Naranjo Garcia, Roger Felipe; Narayan, Rohin; Narrias Villar, Daniel Isaac; Naryshkin, Iouri; Naumann, Thomas; Navarro, Gabriela; Nayyar, Ruchika; Neal, Homer; Nechaeva, Polina; Neep, Thomas James; Nef, Pascal Daniel; Negri, Andrea; Negrini, Matteo; Nektarijevic, Snezana; Nellist, Clara; Nelson, Andrew; Nemecek, Stanislav; Nemethy, Peter; Nepomuceno, Andre Asevedo; Nessi, Marzio; Neubauer, Mark; Neumann, Manuel; Neves, Ricardo; Nevski, Pavel; Newman, Paul; Nguyen, Duong Hai; Nguyen Manh, Tuan; Nickerson, Richard; Nicolaidou, Rosy; Nielsen, Jason; Nikiforov, Andriy; Nikolaenko, Vladimir; Nikolic-Audit, Irena; Nikolopoulos, Konstantinos; Nilsen, Jon Kerr; Nilsson, Paul; Ninomiya, Yoichi; Nisati, Aleandro; Nisius, Richard; Nobe, Takuya; Nodulman, Lawrence; Nomachi, Masaharu; Nomidis, Ioannis; Nooney, Tamsin; Norberg, Scarlet; Nordberg, Markus; Norjoharuddeen, Nurfikri; Novgorodova, Olga; Nowak, Sebastian; Nozaki, Mitsuaki; Nozka, Libor; Ntekas, Konstantinos; Nurse, Emily; Nuti, Francesco; O'grady, Fionnbarr; O'Neil, Dugan; O'Rourke, Abigail Alexandra; O'Shea, Val; Oakham, Gerald; Oberlack, Horst; Obermann, Theresa; Ocariz, Jose; Ochi, Atsuhiko; Ochoa, Ines; Ochoa-Ricoux, Juan Pedro; Oda, Susumu; Odaka, Shigeru; Ogren, Harold; Oh, Alexander; Oh, Seog; Ohm, Christian; Ohman, Henrik; Oide, Hideyuki; Okawa, Hideki; Okumura, Yasuyuki; Okuyama, Toyonobu; Olariu, Albert; Oleiro Seabra, Luis Filipe; Olivares Pino, Sebastian Andres; Oliveira Damazio, Denis; Olszewski, Andrzej; Olszowska, Jolanta; Onofre, António; Onogi, Kouta; Onyisi, Peter; Oreglia, Mark; Oren, Yona; Orestano, Domizia; Orlando, Nicola; Orr, Robert; Osculati, Bianca; Ospanov, Rustem; Otero y Garzon, Gustavo; Otono, Hidetoshi; Ouchrif, Mohamed; Ould-Saada, Farid; Ouraou, Ahmimed; Oussoren, Koen Pieter; Ouyang, Qun; Owen, Mark; Owen, Rhys Edward; Ozcan, Veysi Erkcan; Ozturk, Nurcan; Pachal, Katherine; Pacheco Pages, Andres; Pacheco Rodriguez, Laura; Padilla Aranda, Cristobal; Pagáčová, Martina; Pagan Griso, Simone; Paige, Frank; Pais, Preema; Pajchel, Katarina; Palacino, Gabriel; Palazzo, Serena; Palestini, Sandro; Palka, Marek; Pallin, Dominique; Palma, Alberto; Panagiotopoulou, Evgenia; Pandini, Carlo Enrico; Panduro Vazquez, William; Pani, Priscilla; Panitkin, Sergey; Pantea, Dan; Paolozzi, Lorenzo; Papadopoulou, Theodora; Papageorgiou, Konstantinos; Paramonov, Alexander; Paredes Hernandez, Daniela; Parker, Adam Jackson; Parker, Michael Andrew; Parker, Kerry Ann; Parodi, Fabrizio; Parsons, John; Parzefall, Ulrich; Pascuzzi, Vincent; Pasqualucci, Enrico; Passaggio, Stefano; Pastore, Francesca; Pásztor, Gabriella; Pataraia, Sophio; Pater, Joleen; Pauly, Thilo; Pearce, James; Pearson, Benjamin; Pedersen, Lars Egholm; Pedersen, Maiken; Pedraza Lopez, Sebastian; Pedro, Rute; Peleganchuk, Sergey; Pelikan, Daniel; Penc, Ondrej; Peng, Cong; Peng, Haiping; Penwell, John; Peralva, Bernardo; Perego, Marta Maria; Perepelitsa, Dennis; Perez Codina, Estel; Perini, Laura; Pernegger, Heinz; Perrella, Sabrina; Peschke, Richard; Peshekhonov, Vladimir; Peters, Krisztian; Peters, Yvonne; Petersen, Brian; Petersen, Troels; Petit, Elisabeth; Petridis, Andreas; Petridou, Chariclia; Petroff, Pierre; Petrolo, Emilio; Petrov, Mariyan; Petrucci, Fabrizio; Pettersson, Nora Emilia; Peyaud, Alan; Pezoa, Raquel; Phillips, Peter William; Piacquadio, Giacinto; Pianori, Elisabetta; Picazio, Attilio; Piccaro, Elisa; Piccinini, Maurizio; Pickering, Mark Andrew; Piegaia, Ricardo; Pilcher, James; Pilkington, Andrew; Pin, Arnaud Willy J; Pinamonti, Michele; Pinfold, James; Pingel, Almut; Pires, Sylvestre; Pirumov, Hayk; Pitt, Michael; Plazak, Lukas; Pleier, Marc-Andre; Pleskot, Vojtech; Plotnikova, Elena; Plucinski, Pawel; Pluth, Daniel; Poettgen, Ruth; Poggioli, Luc; Pohl, David-leon; Polesello, Giacomo; Poley, Anne-luise; Policicchio, Antonio; Polifka, Richard; Polini, Alessandro; Pollard, Christopher Samuel; Polychronakos, Venetios; Pommès, Kathy; Pontecorvo, Ludovico; Pope, Bernard; Popeneciu, Gabriel Alexandru; Popovic, Dragan; Poppleton, Alan; Pospisil, Stanislav; Potamianos, Karolos; Potrap, Igor; Potter, Christina; Potter, Christopher; Poulard, Gilbert; Poveda, Joaquin; Pozdnyakov, Valery; Pozo Astigarraga, Mikel Eukeni; Pralavorio, Pascal; Pranko, Aliaksandr; Prell, Soeren; Price, Darren; Price, Lawrence; Primavera, Margherita; Prince, Sebastien; Proissl, Manuel; Prokofiev, Kirill; Prokoshin, Fedor; Protopopescu, Serban; Proudfoot, James; Przybycien, Mariusz; Puddu, Daniele; Purohit, Milind; Puzo, Patrick; Qian, Jianming; Qin, Gang; Qin, Yang; Quadt, Arnulf; Quayle, William; Queitsch-Maitland, Michaela; Quilty, Donnchadha; Raddum, Silje; Radeka, Veljko; Radescu, Voica; Radhakrishnan, Sooraj Krishnan; Radloff, Peter; Rados, Pere; Ragusa, Francesco; Rahal, Ghita; Raine, John Andrew; Rajagopalan, Srinivasan; Rammensee, Michael; Rangel-Smith, Camila; Ratti, Maria Giulia; Rauscher, Felix; Rave, Stefan; Ravenscroft, Thomas; Ravinovich, Ilia; Raymond, Michel; Read, Alexander Lincoln; Readioff, Nathan Peter; Reale, Marilea; Rebuzzi, Daniela; Redelbach, Andreas; Redlinger, George; Reece, Ryan; Reeves, Kendall; Rehnisch, Laura; Reichert, Joseph; Reisin, Hernan; Rembser, Christoph; Ren, Huan; Rescigno, Marco; Resconi, Silvia; Rezanova, Olga; Reznicek, Pavel; Rezvani, Reyhaneh; Richter, Robert; Richter, Stefan; Richter-Was, Elzbieta; Ricken, Oliver; Ridel, Melissa; Rieck, Patrick; Riegel, Christian Johann; Rieger, Julia; Rifki, Othmane; Rijssenbeek, Michael; Rimoldi, Adele; Rimoldi, Marco; Rinaldi, Lorenzo; Ristić, Branislav; Ritsch, Elmar; Riu, Imma; Rizatdinova, Flera; Rizvi, Eram; Rizzi, Chiara; Robertson, Steven; Robichaud-Veronneau, Andree; Robinson, Dave; Robinson, James; Robson, Aidan; Roda, Chiara; Rodina, Yulia; Rodriguez Perez, Andrea; Rodriguez Rodriguez, Daniel; Roe, Shaun; Rogan, Christopher Sean; Røhne, Ole; Romaniouk, Anatoli; Romano, Marino; Romano Saez, Silvestre Marino; Romero Adam, Elena; Rompotis, Nikolaos; Ronzani, Manfredi; Roos, Lydia; Ros, Eduardo; Rosati, Stefano; Rosbach, Kilian; Rose, Peyton; Rosenthal, Oliver; Rosien, Nils-Arne; Rossetti, Valerio; Rossi, Elvira; Rossi, Leonardo Paolo; Rosten, Jonatan; Rosten, Rachel; Rotaru, Marina; Roth, Itamar; Rothberg, Joseph; Rousseau, David; Royon, Christophe; Rozanov, Alexandre; Rozen, Yoram; Ruan, Xifeng; Rubbo, Francesco; Rudolph, Matthew Scott; Rühr, Frederik; Ruiz-Martinez, Aranzazu; Rurikova, Zuzana; Rusakovich, Nikolai; Ruschke, Alexander; Russell, Heather; Rutherfoord, John; Ruthmann, Nils; Ryabov, Yury; Rybar, Martin; Rybkin, Grigori; Ryu, Soo; Ryzhov, Andrey; Rzehorz, Gerhard Ferdinand; Saavedra, Aldo; Sabato, Gabriele; Sacerdoti, Sabrina; Sadrozinski, Hartmut; Sadykov, Renat; Safai Tehrani, Francesco; Saha, Puja; Sahinsoy, Merve; Saimpert, Matthias; Saito, Tomoyuki; Sakamoto, Hiroshi; Sakurai, Yuki; Salamanna, Giuseppe; Salamon, Andrea; Salazar Loyola, Javier Esteban; Salek, David; Sales De Bruin, Pedro Henrique; Salihagic, Denis; Salnikov, Andrei; Salt, José; Salvatore, Daniela; Salvatore, Pasquale Fabrizio; Salvucci, Antonio; Salzburger, Andreas; Sammel, Dirk; Sampsonidis, Dimitrios; Sanchez, Arturo; Sánchez, Javier; Sanchez Martinez, Victoria; Sandaker, Heidi; Sandbach, Ruth Laura; Sander, Heinz Georg; Sandhoff, Marisa; Sandoval, Carlos; Sandstroem, Rikard; Sankey, Dave; Sannino, Mario; Sansoni, Andrea; Santoni, Claudio; Santonico, Rinaldo; Santos, Helena; Santoyo Castillo, Itzebelt; Sapp, Kevin; Sapronov, Andrey; Saraiva, João; Sarrazin, Bjorn; Sasaki, Osamu; Sasaki, Yuichi; Sato, Koji; Sauvage, Gilles; Sauvan, Emmanuel; Savage, Graham; Savard, Pierre; Sawyer, Craig; Sawyer, Lee; Saxon, James; Sbarra, Carla; Sbrizzi, Antonio; Scanlon, Tim; Scannicchio, Diana; Scarcella, Mark; Scarfone, Valerio; Schaarschmidt, Jana; Schacht, Peter; Schachtner, Balthasar Maria; Schaefer, Douglas; Schaefer, Ralph; Schaeffer, Jan; Schaepe, Steffen; Schaetzel, Sebastian; Schäfer, Uli; Schaffer, Arthur; Schaile, Dorothee; Schamberger, R Dean; Scharf, Veit; Schegelsky, Valery; Scheirich, Daniel; Schernau, Michael; Schiavi, Carlo; Schier, Sheena; Schillo, Christian; Schioppa, Marco; Schlenker, Stefan; Schmidt-Sommerfeld, Korbinian Ralf; Schmieden, Kristof; Schmitt, Christian; Schmitt, Stefan; Schmitz, Simon; Schneider, Basil; Schnoor, Ulrike; Schoeffel, Laurent; Schoening, Andre; Schoenrock, Bradley Daniel; Schopf, Elisabeth; Schott, Matthias; Schovancova, Jaroslava; Schramm, Steven; Schreyer, Manuel; Schuh, Natascha; Schulte, Alexandra; Schultens, Martin Johannes; Schultz-Coulon, Hans-Christian; Schulz, Holger; Schumacher, Markus; Schumm, Bruce; Schune, Philippe; Schwartzman, Ariel; Schwarz, Thomas Andrew; Schwegler, Philipp; Schweiger, Hansdieter; Schwemling, Philippe; Schwienhorst, Reinhard; Schwindling, Jerome; Schwindt, Thomas; Sciolla, Gabriella; Scuri, Fabrizio; Scutti, Federico; Searcy, Jacob; Seema, Pienpen; Seidel, Sally; Seiden, Abraham; Seifert, Frank; Seixas, José; Sekhniaidze, Givi; Sekhon, Karishma; Sekula, Stephen; Seliverstov, Dmitry; Semprini-Cesari, Nicola; Serfon, Cedric; Serin, Laurent; Serkin, Leonid; Sessa, Marco; Seuster, Rolf; Severini, Horst; Sfiligoj, Tina; Sforza, Federico; Sfyrla, Anna; Shabalina, Elizaveta; Shaikh, Nabila Wahab; Shan, Lianyou; Shang, Ruo-yu; Shank, James; Shapiro, Marjorie; Shatalov, Pavel; Shaw, Kate; Shaw, Savanna Marie; Shcherbakova, Anna; Shehu, Ciwake Yusufu; Sherwood, Peter; Shi, Liaoshan; Shimizu, Shima; Shimmin, Chase Owen; Shimojima, Makoto; Shiyakova, Mariya; Shmeleva, Alevtina; Shoaleh Saadi, Diane; Shochet, Mel; Shojaii, Seyed Ruhollah; Shrestha, Suyog; Shulga, Evgeny; Shupe, Michael; Sicho, Petr; Sickles, Anne Marie; Sidebo, Per Edvin; Sidiropoulou, Ourania; Sidorov, Dmitri; Sidoti, Antonio; Siegert, Frank; Sijacki, Djordje; Silva, José; Silverstein, Samuel; Simak, Vladislav; Simard, Olivier; Simic, Ljiljana; Simion, Stefan; Simioni, Eduard; Simmons, Brinick; Simon, Dorian; Simon, Manuel; Sinervo, Pekka; Sinev, Nikolai; Sioli, Maximiliano; Siragusa, Giovanni; Sivoklokov, Serguei; Sjölin, Jörgen; Skinner, Malcolm Bruce; Skottowe, Hugh Philip; Skubic, Patrick; Slater, Mark; Slavicek, Tomas; Slawinska, Magdalena; Sliwa, Krzysztof; Slovak, Radim; Smakhtin, Vladimir; Smart, Ben; Smestad, Lillian; Smiesko, Juraj; Smirnov, Sergei; Smirnov, Yury; Smirnova, Lidia; Smirnova, Oxana; Smith, Matthew; Smith, Russell; Smizanska, Maria; Smolek, Karel; Snesarev, Andrei; Snyder, Scott; Sobie, Randall; Socher, Felix; Soffer, Abner; Soh, Dart-yin; Sokhrannyi, Grygorii; Solans Sanchez, Carlos; Solar, Michael; Soldatov, Evgeny; Soldevila, Urmila; Solodkov, Alexander; Soloshenko, Alexei; Solovyanov, Oleg; Solovyev, Victor; Sommer, Philip; Son, Hyungsuk; Song, Hong Ye; Sood, Alexander; Sopczak, Andre; Sopko, Vit; Sorin, Veronica; Sosa, David; Sotiropoulou, Calliope Louisa; Soualah, Rachik; Soukharev, Andrey; South, David; Sowden, Benjamin; Spagnolo, Stefania; Spalla, Margherita; Spangenberg, Martin; Spanò, Francesco; Sperlich, Dennis; Spettel, Fabian; Spighi, Roberto; Spigo, Giancarlo; Spiller, Laurence Anthony; Spousta, Martin; St Denis, Richard Dante; Stabile, Alberto; Stamen, Rainer; Stamm, Soren; Stanecka, Ewa; Stanek, Robert; Stanescu, Cristian; Stanescu-Bellu, Madalina; Stanitzki, Marcel Michael; Stapnes, Steinar; Starchenko, Evgeny; Stark, Giordon; Stark, Jan; Staroba, Pavel; Starovoitov, Pavel; Stärz, Steffen; Staszewski, Rafal; Steinberg, Peter; Stelzer, Bernd; Stelzer, Harald Joerg; Stelzer-Chilton, Oliver; Stenzel, Hasko; Stewart, Graeme; Stillings, Jan Andre; Stockton, Mark; Stoebe, Michael; Stoicea, Gabriel; Stolte, Philipp; Stonjek, Stefan; Stradling, Alden; Straessner, Arno; Stramaglia, Maria Elena; Strandberg, Jonas; Strandberg, Sara; Strandlie, Are; Strauss, Michael; Strizenec, Pavol; Ströhmer, Raimund; Strom, David; Stroynowski, Ryszard; Strubig, Antonia; Stucci, Stefania Antonia; Stugu, Bjarne; Styles, Nicholas Adam; Su, Dong; Su, Jun; Subramaniam, Rajivalochan; Suchek, Stanislav; Sugaya, Yorihito; Suk, Michal; Sulin, Vladimir; Sultansoy, Saleh; Sumida, Toshi; Sun, Siyuan; Sun, Xiaohu; Sundermann, Jan Erik; Suruliz, Kerim; Susinno, Giancarlo; Sutton, Mark; Suzuki, Shota; Svatos, Michal; Swiatlowski, Maximilian; Sykora, Ivan; Sykora, Tomas; Ta, Duc; Taccini, Cecilia; Tackmann, Kerstin; Taenzer, Joe; Taffard, Anyes; Tafirout, Reda; Taiblum, Nimrod; Takai, Helio; Takashima, Ryuichi; Takeshita, Tohru; Takubo, Yosuke; Talby, Mossadek; Talyshev, Alexey; Tan, Kong Guan; Tanaka, Junichi; Tanaka, Reisaburo; Tanaka, Shuji; Tannenwald, Benjamin Bordy; Tapia Araya, Sebastian; Tapprogge, Stefan; Tarem, Shlomit; Tartarelli, Giuseppe Francesco; Tas, Petr; Tasevsky, Marek; Tashiro, Takuya; Tassi, Enrico; Tavares Delgado, Ademar; Tayalati, Yahya; Taylor, Aaron; Taylor, Geoffrey; Taylor, Pierre Thor Elliot; Taylor, Wendy; Teischinger, Florian Alfred; Teixeira-Dias, Pedro; Temming, Kim Katrin; Temple, Darren; Ten Kate, Herman; Teng, Ping-Kun; Teoh, Jia Jian; Tepel, Fabian-Phillipp; Terada, Susumu; Terashi, Koji; Terron, Juan; Terzo, Stefano; Testa, Marianna; Teuscher, Richard; Theveneaux-Pelzer, Timothée; Thomas, Juergen; Thomas-Wilsker, Joshuha; Thompson, Emily; Thompson, Paul; Thompson, Stan; Thomsen, Lotte Ansgaard; Thomson, Evelyn; Thomson, Mark; Tibbetts, Mark James; Ticse Torres, Royer Edson; Tikhomirov, Vladimir; Tikhonov, Yury; Timoshenko, Sergey; Tipton, Paul; Tisserant, Sylvain; Todome, Kazuki; Todorov, Theodore; Todorova-Nova, Sharka; Tojo, Junji; Tokár, Stanislav; Tokushuku, Katsuo; Tolley, Emma; Tomlinson, Lee; Tomoto, Makoto; Tompkins, Lauren; Toms, Konstantin; Tong, Baojia(Tony); Torrence, Eric; Torres, Heberth; Torró Pastor, Emma; Toth, Jozsef; Touchard, Francois; Tovey, Daniel; Trefzger, Thomas; Tricoli, Alessandro; Trigger, Isabel Marian; Trincaz-Duvoid, Sophie; Tripiana, Martin; Trischuk, William; Trocmé, Benjamin; Trofymov, Artur; Troncon, Clara; Trottier-McDonald, Michel; Trovatelli, Monica; Truong, Loan; Trzebinski, Maciej; Trzupek, Adam; Tseng, Jeffrey; Tsiareshka, Pavel; Tsipolitis, Georgios; Tsirintanis, Nikolaos; Tsiskaridze, Shota; Tsiskaridze, Vakhtang; Tskhadadze, Edisher; Tsui, Ka Ming; Tsukerman, Ilya; Tsulaia, Vakhtang; Tsuno, Soshi; Tsybychev, Dmitri; Tudorache, Alexandra; Tudorache, Valentina; Tuna, Alexander Naip; Tupputi, Salvatore; Turchikhin, Semen; Turecek, Daniel; Turgeman, Daniel; Turra, Ruggero; Turvey, Andrew John; Tuts, Michael; Tyndel, Mike; Ucchielli, Giulia; Ueda, Ikuo; Ughetto, Michael; Ukegawa, Fumihiko; Unal, Guillaume; Undrus, Alexander; Unel, Gokhan; Ungaro, Francesca; Unno, Yoshinobu; Unverdorben, Christopher; Urban, Jozef; Urquijo, Phillip; Urrejola, Pedro; Usai, Giulio; Usanova, Anna; Vacavant, Laurent; Vacek, Vaclav; Vachon, Brigitte; Valderanis, Chrysostomos; Valdes Santurio, Eduardo; Valencic, Nika; Valentinetti, Sara; Valero, Alberto; Valery, Loic; Valkar, Stefan; Vallecorsa, Sofia; Valls Ferrer, Juan Antonio; Van Den Wollenberg, Wouter; Van Der Deijl, Pieter; van der Geer, Rogier; van der Graaf, Harry; van Eldik, Niels; van Gemmeren, Peter; Van Nieuwkoop, Jacobus; van Vulpen, Ivo; van Woerden, Marius Cornelis; Vanadia, Marco; Vandelli, Wainer; Vanguri, Rami; Vaniachine, Alexandre; Vankov, Peter; Vardanyan, Gagik; Vari, Riccardo; Varnes, Erich; Varol, Tulin; Varouchas, Dimitris; Vartapetian, Armen; Varvell, Kevin; Vasquez, Jared Gregory; Vazeille, Francois; Vazquez Schroeder, Tamara; Veatch, Jason; Veloce, Laurelle Maria; Veloso, Filipe; Veneziano, Stefano; Ventura, Andrea; Venturi, Manuela; Venturi, Nicola; Venturini, Alessio; Vercesi, Valerio; Verducci, Monica; Verkerke, Wouter; Vermeulen, Jos; Vest, Anja; Vetterli, Michel; Viazlo, Oleksandr; Vichou, Irene; Vickey, Trevor; Vickey Boeriu, Oana Elena; Viehhauser, Georg; Viel, Simon; Vigani, Luigi; Vigne, Ralph; Villa, Mauro; Villaplana Perez, Miguel; Vilucchi, Elisabetta; Vincter, Manuella; Vinogradov, Vladimir; Vittori, Camilla; Vivarelli, Iacopo; Vlachos, Sotirios; Vlasak, Michal; Vogel, Marcelo; Vokac, Petr; Volpi, Guido; Volpi, Matteo; von der Schmitt, Hans; von Toerne, Eckhard; Vorobel, Vit; Vorobev, Konstantin; Vos, Marcel; Voss, Rudiger; Vossebeld, Joost; Vranjes, Nenad; Vranjes Milosavljevic, Marija; Vrba, Vaclav; Vreeswijk, Marcel; Vuillermet, Raphael; Vukotic, Ilija; Vykydal, Zdenek; Wagner, Peter; Wagner, Wolfgang; Wahlberg, Hernan; Wahrmund, Sebastian; Wakabayashi, Jun; Walder, James; Walker, Rodney; Walkowiak, Wolfgang; Wallangen, Veronica; Wang, Chao; Wang, Chao; Wang, Fuquan; Wang, Haichen; Wang, Hulin; Wang, Jike; Wang, Jin; Wang, Kuhan; Wang, Rui; Wang, Song-Ming; Wang, Tan; Wang, Tingting; Wang, Wenxiao; Wang, Xiaoxiao; Wanotayaroj, Chaowaroj; Warburton, Andreas; Ward, Patricia; Wardrope, David Robert; Washbrook, Andrew; Watkins, Peter; Watson, Alan; Watson, Miriam; Watts, Gordon; Watts, Stephen; Waugh, Ben; Webb, Samuel; Weber, Michele; Weber, Stefan Wolf; Webster, Jordan S; Weidberg, Anthony; Weinert, Benjamin; Weingarten, Jens; Weiser, Christian; Weits, Hartger; Wells, Phillippa; Wenaus, Torre; Wengler, Thorsten; Wenig, Siegfried; Wermes, Norbert; Werner, Matthias; Werner, Michael David; Werner, Per; Wessels, Martin; Wetter, Jeffrey; Whalen, Kathleen; Whallon, Nikola Lazar; Wharton, Andrew Mark; White, Andrew; White, Martin; White, Ryan; Whiteson, Daniel; Wickens, Fred; Wiedenmann, Werner; Wielers, Monika; Wienemann, Peter; Wiglesworth, Craig; Wiik-Fuchs, Liv Antje Mari; Wildauer, Andreas; Wilk, Fabian; Wilkens, Henric George; Williams, Hugh; Williams, Sarah; Willis, Christopher; Willocq, Stephane; Wilson, John; Wingerter-Seez, Isabelle; Winklmeier, Frank; Winston, Oliver James; Winter, Benedict Tobias; Wittgen, Matthias; Wittkowski, Josephine; Wolter, Marcin Wladyslaw; Wolters, Helmut; Worm, Steven D; Wosiek, Barbara; Wotschack, Jorg; Woudstra, Martin; Wozniak, Krzysztof; Wu, Mengqing; Wu, Miles; Wu, Sau Lan; Wu, Xin; Wu, Yusheng; Wyatt, Terry Richard; Wynne, Benjamin; Xella, Stefania; Xu, Da; Xu, Lailin; Yabsley, Bruce; Yacoob, Sahal; Yakabe, Ryota; Yamaguchi, Daiki; Yamaguchi, Yohei; Yamamoto, Akira; Yamamoto, Shimpei; Yamanaka, Takashi; Yamauchi, Katsuya; Yamazaki, Yuji; Yan, Zhen; Yang, Haijun; Yang, Hongtao; Yang, Yi; Yang, Zongchang; Yao, Weiming; Yap, Yee Chinn; Yasu, Yoshiji; Yatsenko, Elena; Yau Wong, Kaven Henry; Ye, Jingbo; Ye, Shuwei; Yeletskikh, Ivan; Yen, Andy L; Yildirim, Eda; Yorita, Kohei; Yoshida, Rikutaro; Yoshihara, Keisuke; Young, Charles; Young, Christopher John; Youssef, Saul; Yu, David Ren-Hwa; Yu, Jaehoon; Yu, Jiaming; Yu, Jie; Yuan, Li; Yuen, Stephanie P; Yusuff, Imran; Zabinski, Bartlomiej; Zaidan, Remi; Zaitsev, Alexander; Zakharchuk, Nataliia; Zalieckas, Justas; Zaman, Aungshuman; Zambito, Stefano; Zanello, Lucia; Zanzi, Daniele; Zeitnitz, Christian; Zeman, Martin; Zemla, Andrzej; Zeng, Jian Cong; Zeng, Qi; Zengel, Keith; Zenin, Oleg; Ženiš, Tibor; Zerwas, Dirk; Zhang, Dongliang; Zhang, Fangzhou; Zhang, Guangyi; Zhang, Huijun; Zhang, Jinlong; Zhang, Lei; Zhang, Rui; Zhang, Ruiqi; Zhang, Xueyao; Zhang, Zhiqing; Zhao, Xiandong; Zhao, Yongke; Zhao, Zhengguo; Zhemchugov, Alexey; Zhong, Jiahang; Zhou, Bing; Zhou, Chen; Zhou, Lei; Zhou, Li; Zhou, Mingliang; Zhou, Ning; Zhu, Cheng Guang; Zhu, Hongbo; Zhu, Junjie; Zhu, Yingchun; Zhuang, Xuai; Zhukov, Konstantin; Zibell, Andre; Zieminska, Daria; Zimine, Nikolai; Zimmermann, Christoph; Zimmermann, Stephanie; Zinonos, Zinonas; Zinser, Markus; Ziolkowski, Michael; Živković, Lidija; Zobernig, Georg; Zoccoli, Antonio; zur Nedden, Martin; Zwalinski, Lukasz

2017-01-20

A measurement of the $t\\bar{t}Z$ and $t\\bar{t}W$ production cross sections in final states with either two same-charge muons, or three or four leptons (electrons or muons) is presented. The analysis uses a data sample of proton-proton collisions at $\\sqrt{s} = 13$ TeV recorded with the ATLAS detector at the Large Hadron Collider in 2015, corresponding to a total integrated luminosity of 3.2 fb$^{-1}$. The inclusive cross sections are extracted using likelihood fits to signal and control regions, resulting in $\\sigma_{t\\bar{t}Z} = 0.9 \\pm 0.3$ pb and $\\sigma_{t\\bar{t}W} = 1.5 \\pm 0.8$ pb, in agreement with the Standard Model predictions.

Investigation into brittle failure of some starter bars

NARCIS (Netherlands)

Hordijk, D.A.; Vliet, M.R.A. van

2002-01-01

This paper reports on an investigation into the cause and consequences of an observed brittle behaviour of some starter bars on a construction site in the Netherlands. A few bars suddenly failed when they were bent in order to align them. For the investigation firstly a batch of starter bars that

Prediction of Vibration Transmission within Periodic Bar Structures

DEFF Research Database (Denmark)

Domadiya, Parthkumar Gandalal; Andersen, Lars Vabbersgaard; Sorokin, Sergey

2012-01-01

The present analysis focuses on vibration transmission within semi-infinite bar structure. The bar is consisting of two different materials in a periodic manner. A periodic bar model is generated using two various methods: The Finite Element method (FEM) and a Floquet theory approach. A parameter...... study is carried out regarding the influence of the number of periods at various frequencies within a semi-infinite bar, stop bands are illustrated at certain periodic intervals within the structure. The computations are carried out in frequency domain in the range below 500 Hz. Results from both...

Measurements of σ(e+e- hadrons) and B(ψ →(3770) DD-bar, non-DD-bar)

International Nuclear Information System (INIS)

Rong, Gang

2005-01-01

We report measurements of the cross sections for inclusive hadronic event production in e + e - annihilation at the energies of 3.650, 3.6648, and 3.773 GeV and measurements of the branching fractions for ψ(3770) → D 0 D b ar 0 , D + D - , DD-bar, and for ψ(3770) → non-DD-bar. (author)

SNACK BAR TINGGI SERAT BERBASIS TEPUNG AMPAS TAHU (OKARA DAN TEPUNG UBI UNGU

Directory of Open Access Journals (Sweden)

Nuri Rachmayani 1

2017-12-01

Full Text Available Unbalanced dietary consumption, lack of dietary fiber intake and low physical activity could lead to excessive nutrients resulting in obesity. This research aims to create high-fiber snack food in the form of snack bar made from pulp of tofu flour (okara, purple sweet potato flour, and cornstarch. The experimental design was a complete factorial randomized design with two variables and two replications. Two variables tested were the ratio between purple sweet potato flour and cornstarch of 1:1 and 1:2 (w/w, and the addition okara of 20, 25, and 30%. As a control, a snack bar was made from wheat flour. The analysis performed include sensory and physicochemical analysis. The recommended high-fiber healthy snack bar was the snack bar made from 20% okara, with a ratio of purple sweet potato flour to cornstarch of 1:2 (w/w. This snack bar had a sensory score of 4.31 on the overall attribute which means neutral. The anthocyanin level of the cookies was 1.97 mg/100 g (db and dietary fiber level was 13.87% (db, therefore they can be categorized as high fiber okara food according to the head of BPOM regulation number HK 03.1.23.11.11.09909 year 2011.

Extruded bar reinforced structure and manufacturing procedures

International Nuclear Information System (INIS)

Truchet, J.M.; Bozetto, P.

1989-01-01

A cooling tower has horizontal hoops connected by two inclined sets of bars to form a trellis of equilateral triangle anchored in the ground. The bars and hoops are connected at the corners of the triangle. A skin stretched over the trellis defines the tower. The bars are made with thermosetting resin reinforced by fibres. The fabrication of such tower is cheep and simple it can be used for every type of electrical power station, nuclear or not [fr

Study of $ \\bar{p} $ and $ \\bar{n} $ annihilations at LEAR with OBELIX, a large acceptance and high resolution detector based on the Open Axial Field Spectrometer

CERN Multimedia

2002-01-01

% PS201 Study of $\\bar{p}$ and $\\bar{n}$ annihilations at LEAR with OBELIX, a large acceptance and high resolution detector based on the Open Axial Field Spectrometer \\\\ \\\\OBELIX is designed to study exclusive final states of antiproton and antineutron annihilations at low energies with protons and nuclei. \\\\ \\\\The physics motivations of the experiment are:\\\\ \\\\\\begin{itemize} \\item (gg, ggg), hybrids ($ q \\bar{q} g $), multiquarks ($ q q \\bar{q} \\bar{q} $) and light mesons ($ q \\bar{q} $) produced in $ N \\bar{N} $ annihilations and study of their spectroscopy and decays. Also broad structures will be searched for by comparing identical decay modes in exclusive final states of the same type occuring from initial states with different angular momentum or isospin. \\item Study of the dynamics of $ N \\bar{N} $ interactions and of the dependence of the final and intermediate resonant states of annihilation upon the quantum numbers of the initial $ N \\bar{N} $ state (angular momentum: S and P-wave in $\\bar{p}p $ at...

The Bar Tack Machine. Module 16.

Science.gov (United States)

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

This module on the bar tack machine, one in a series dealing with industrial sewing machines, their attachments, and operation, covers one topic: performing special operations on the bar tack machine. These components are provided: an introduction, directions, an objective, learning activities, student information, a student self-check, and a…

Observation of $\\eta_{c}(2S) \\to p \\bar p$ and search for $X(3872) \\to p \\bar p$ decays

CERN Document Server

Aaij, Roel

2017-06-10

The first observation of the decay $\\eta_{c}(2S) \\to p \\bar p$ is reported using proton-proton collision data corresponding to an integrated luminosity of $3.0\\rm \\, fb^{-1}$ recorded by the LHCb experiment at centre-of-mass energies of 7 and 8 TeV. The $\\eta_{c}(2S)$ resonance is produced in the decay $B^{+} \\to [c\\bar c] K^{+}$. The product of branching fractions normalised to that for the $J/\\psi$ intermediate state, ${\\cal R}_{\\eta_{c}(2S)}$, is measured to be \\begin{align*} {\\cal R}_{\\eta_{c}(2S)}\\equiv\\frac{{\\mathcal B}(B^{+} \\to \\eta_{c}(2S) K^{+}) \\times {\\mathcal B}(\\eta_{c}(2S) \\to p \\bar p)}{{\\mathcal B}(B^{+} \\to J/\\psi K^{+}) \\times {\\mathcal B}(J/\\psi\\to p \\bar p)} =~& (1.58 \\pm 0.33 \\pm 0.09)\\times 10^{-2}, \\end{align*} where the first uncertainty is statistical and the second systematic. No signals for the decays $B^{+} \\to X(3872) (\\to p \\bar p) K^{+}$ and $B^{+} \\to \\psi(3770) (\\to p \\bar p) K^{+}$ are seen, and the 95\\% confidence level upper limits on their relative branching ratios ar...

Associated production of $H(b\\bar b, c\\bar c)$ with a W or a Z in ATLAS

CERN Document Server

Nielsen, Jason; The ATLAS collaboration

2018-01-01

Results are presented from the ATLAS searches for Standard Model Higgs bosons decaying to a $b\\bar b$ or $c\\bar c$ pair, produced in association with a $W$ or $Z$ boson. The analyzed data correspond to $36.1\\,\\text{fb}^{-1}$ of $13\\,\\text{TeV}$ proton-proton collision data collected in Run 2 of the Large Hadron Collider. The combination of Run 1 and Run 2 data in the $b\\bar b$ channel yields a ratio of the measured production rate to the SM prediction equal to $0.90 \\pm 0.18\\ \\text{(stat.)}^{+0.21}_{-0.19}\\ \\text{(syst.)}$. The observed significance of $3.6\\sigma$ provides evidence for the direct $Hbb$ Yukawa coupling. A similar search for $c\\bar c$ decays results in an upper limit on the production cross section times branching ratio of $2.7\\,\\text{pb}$.

Going Smokefree Matters - Bars and Restaurants Infographic

Data.gov (United States)

U.S. Department of Health & Human Services — Explore the Going Smokefree Matters – Bars and Restaurants Infographic which outlines key facts related to the effects of secondhand smoke exposure in bars and...

Three-body charmful baryonic B decays B-bar→D(D*)NN-bar

International Nuclear Information System (INIS)

Cheng Haiyang; Yang Kweichou

2002-01-01

We study the charmful three-body baryonic B decays B-bar→D ( * ) NN-bar: the color-allowed modes B-bar 0 →D ( * )+ np-bar and the color-suppressed ones B-bar 0 →D ( * )0 pp-bar. While the D* + /D + production ratio is predicted to be of order 3, it is found that D 0 pp-bar has a similar rate as D* 0 pp-bar. It is pointed out that B-bar 0 →D(D*)NN-bar are dominated by the nucleon vector current or by vector meson intermediate states, whereas B-bar 0 →D 0 pp-bar proceeds mainly via the exchange of the axial-vector intermediate state a 1 (1260). The study of the NN-bar invariant mass distribution in general indicates a threshold baryon pair production; that is, a recoil charmed meson accompanied by a low mass baryon pair except that the spectrum of D 0 pp-bar has a hump at large pp-bar invariant mass m pp-bar ∼3.0 GeV

ANALISIS FINANSIAL DAN KELEMBAGAAN RANTAI NILAI MEBEL MAHONI JEPARA

Directory of Open Access Journals (Sweden)

Nunung Parlinah

2011-12-01

Full Text Available Industri mebel umumnya termasuk dalam industri kecil dan menengah. Selain berperan dalam penerimaan devisa, bisnis di bidang mebel ini juga menciptakan lapangan kerja bagi masyarakat terutama di Kabupaten Jepara. Adanya hubungan (pemberi kepercayaan - (penerima kepercayaan yang terjadi antar aktor atau pelaku di dalam rantai berpengaruh terhadap besarnya distribusi nilai tambah yang diperoleh oleh masingmasing pelaku di sepanjang rantai nilai Tujuan dari penelitian ini adalah mengidentifikasi kelembagaan (aturan yang terjadi antar pelaku di sepanjang rantai nilai mebel mahoni Jepara dan menentukan skenario kebijakan yang dapat mendukung bagi kelestarian industri mebel Jepara. Data yang digunakan meliputi data primer dan data sekunder. Analisis data meliputi identifikasi aktor dan kelembagaan (aturan yang terjadi antar pelaku serta analisis manfaat biaya yang terdiri dari NVP, BCR dan IRR. Hasil penelitian menunjukkan bahwa (1 para pengrajin ( memproduksi mebelnya lebih didasarkan pada pesanan pembeli ( . agent principal Asymetic information yang terjadi antara pedagang kayu dan petani juga telah mengakibatkan posisi petani sebagai (2 Nilai NPV, BCRdan IRR untuk tiap pelaku berbeda-beda tetapi nilai-nilai tersebut mengindikasikan bahwa pola kemitraan yang terjadi antar pelaku dalam rantai nilai mebel mahoni saat ini sudah efektif. Skenario kebijakan yang dapat diterapkan adalah kebijakan yang bersifat insentif bagi petani hutan rakyat, peningkatan kemampuan pengrajin di bidang pemasaran; dan membangun aksi kolektif diantara pengrajin. price taker;

Role of Erosion in Shaping Point Bars

Science.gov (United States)

Moody, J.; Meade, R.

2012-04-01

A powerful metaphor in fluvial geomorphology has been that depositional features such as point bars (and other floodplain features) constitute the river's historical memory in the form of uniformly thick sedimentary deposits waiting for the geomorphologist to dissect and interpret the past. For the past three decades, along the channel of Powder River (Montana USA) we have documented (with annual cross-sectional surveys and pit trenches) the evolution of the shape of three point bars that were created when an extreme flood in 1978 cut new channels across the necks of two former meander bends and radically shifted the location of a third bend. Subsequent erosion has substantially reshaped, at different time scales, the relic sediment deposits of varying age. At the weekly to monthly time scale (i.e., floods from snowmelt or floods from convective or cyclonic storms), the maximum scour depth was computed (by using a numerical model) at locations spaced 1 m apart across the entire point bar for a couple of the largest floods. The maximum predicted scour is about 0.22 m. At the annual time scale, repeated cross-section topographic surveys (25 during 32 years) indicate that net annual erosion at a single location can be as great as 0.5 m, and that the net erosion is greater than net deposition during 8, 16, and 32% of the years for the three point bars. On average, the median annual net erosion was 21, 36, and 51% of the net deposition. At the decadal time scale, an index of point bar preservation often referred to as completeness was defined for each cross section as the percentage of the initial deposit (older than 10 years) that was still remaining in 2011; computations indicate that 19, 41, and 36% of the initial deposits of sediment were eroded. Initial deposits were not uniform in thickness and often represented thicker pods of sediment connected by thin layers of sediment or even isolated pods at different elevations across the point bar in response to multiple

Chest Wall Constriction after the Nuss Procedure Identified from Chest Radiograph and Multislice Computed Tomography Shortly after Removal of the Bar.

Science.gov (United States)

Chang, Pei-Yeh; Zeng, Qi; Wong, Kin-Sun; Wang, Chao-Jan; Chang, Chee-Jen

2016-01-01

This study radiographically examined the changes in the chest walls of patients with pectus excavatum (PE) after Nuss bar removal, to define the deformation caused by the bar and stabilizer. In the first part of the study, we compared the changes in chest radiographs of patients with PE to a preoperation PE control group. In the second part, we used multislice computed tomography (CT) scans to provide three-dimensional reconstructions with which to evaluate the changes to the thoracic wall. Part 1 From June 2006 to August 2011, 1,125 patients with PE who had posteroanterior chest radiographs taken before undergoing the Nuss procedure at four hospitals were enrolled as a preoperative control group. At the same time, 203 patients who had the bar removed were enrolled as the study group. The maximum dimensions of the outer boundary of the first to ninth rib pairs (R1-R9, rib pair width), chest height, and chest width were measured. Part 2 Thirty-one consecutive patients with PE (20 males and 11 females) who underwent Nuss bar removal were evaluated 7 to 30 days after operation. During this period, a further 34 patients with PE who had undergone CT imaging before bar insertion were evaluated and compared with the postoperative group. Part 1 The width of the lower ribs (R4-R9) after bar removal was significantly less than in the age-matched controls. The ribs adjacent to the bar (R5-R7) showed the greatest restriction. The width of the upper ribs (R1-R3) 2 to 3 years after bar placement did not differ significantly from the controls. Patients who were operated on after 10 years of age had less of a restrictive effect. Three years of bar placement resulted in more restriction than a 2-year period, particularly in patients younger than 10 years old. Part 2: A significant constriction of the chest wall was observed in 13 patients after removal of the Nuss bar. Constriction at ribs 5 to 8 was found to be present adjacent to the site of bar insertion. However

Going Smokefree Matters - Bars and Restaurants Infographic

Data.gov (United States)

U.S. Department of Health & Human Services — Explore the Going Smokefree Matters – Bars and Restaurants Infographic which outlines key facts related to the effects of secondhand smoke exposure in bars and...

Interaction of a parametric transducer with a resonant bar gravitational radiation detector

International Nuclear Information System (INIS)

Linthorne, N.P.; Veitch, P.J.; Blair, D.G.

1990-01-01

It is shown that a microwave parametric transducer for a resonant bar gravitational radiation antenna can achieve high electromechanical coupling without degrading the acoustic Q of the antenna. The reactive coupling of the transducer to the antenna leads to both cold-damping and modification of the antenna's resonant frequency. These effects are examined in a 1.5 tonne niobium resonant bar antenna. At low coupling the observed behaviour is found to be in good agreement with theory. At higher coupling, the behaviour is complicated by other effects. We discuss how these parametric effects may be used to advantage when suitably controlled. (author)

A xylophone bar magnetometer for micro/pico satellites

Science.gov (United States)

Lamy, Hervé; Niyonzima, Innocent; Rochus, Pierre; Rochus, Véronique

2010-10-01

The Belgian Institute of Space Aeronomy (BIRA-IASB), "Centre Spatial de Liège" (CSL), "Laboratoire de Techniques Aéronautiques et Spatiales" (LTAS) of University of Liège, and the Microwave Laboratory of University of Louvain-La-Neuve (UCL) are collaborating in order to develop a miniature version of a xylophone bar magnetometer (XBM) using Microelectromechanical Systems (MEMS) technology. The device is based on a classical resonating xylophone bar. A sinusoidal current is supplied to the bar oscillating at the fundamental transverse resonant mode of the bar. When an external magnetic field is present, the resulting Lorentz force causes the bar to vibrate at its fundamental frequency with an amplitude directly proportional to the vertical component of the ambient magnetic field. In this paper we illustrate the working principles of the XBM and the challenges to reach the required sensitivity in space applications (measuring magnetic fields with an accuracy of approximately of 0.1 nT). The optimal dimensions of the MEMS XBM are discussed as well as the constraints on the current flowing through the bar. Analytical calculations as well as simulations with finite element methods have been used. Prototypes have been built in the Microwave Laboratory using silicon on insulator (SOI) and bulk micromachining processes. Several methods to accurately measure the displacement of the bar are proposed.

ANALISIS SKENARIO KEGAGALAN SISTEM UNTUK MENENTUKAN PROBABILITAS KECELAKAAN PARAH AP1000

Directory of Open Access Journals (Sweden)

D.T. Sony Tjahyani

2014-03-01

Full Text Available Kejadian Fukushima telah menunjukkan bahwa kecelakaan parah dapat terjadi, maka dari itu sangatlah penting untuk menganalisis tingkat keselamatan pada reaktor daya. Berdasarkan rekomendasi expert mission IAEA setelah kejadian Fukushima, perlu dilakukan upaya untuk meminimalisasi terjadinya kecelakaan parah yaitu dengan melakukan proses pendinginan yang maksimal. Dalam konsep keselamatan fasilitas nuklir, khususnya reaktor daya telah diterapkan konsep keselamatan berlapis (Defence in Depth, DiD. Konsep keselamatan tersebut terdiri atas 5 level pertahanan yang bertujuan mencegah dan mengurangi lepasan produk fisi ke masyarakat dan lingkungan pada saat reaktor daya mengalami kecelakaan. Dalam reaktor telah didesain sistem atau tindakan yang mempunyai fungsi untuk mengatasi setiap level tersebut. Tujuan dari analisis ini adalah menentukan probabilitas kecelakaan parah dengan melakukan skenario kegagalan sistem dalam proses pendinginan di reaktor. Sebagai obyek analisis adalah reaktor daya AP1000, karena jenis reaktor ini sedang banyak dibangun saat ini. Skenario dilakukan dengan mengasumsikan beberapa kombinasi kegagalan sistem yang termasuk dalam DiD level 2 dan 3. Kegagalan sistem kemudian dianalisis dengan menggunakan analisis pohon kegagalan berdasarkan perangkat lunak SAPHIRE ver. 6.76. Dari analisis didapatkan probabilitas gagal dari kelompok sistem DiD level 2 dan 3 pada AP1000 masih di bawah batas kriteria dari IAEA yaitu lebih kecil dari 10-2, serta probabilitas kecelakaan parah didapatkan sebesar 6,17 x 10-10. Berdasarkan analisis ini disimpulkan bahwa AP1000 mempunyai tingkat keselamatan yang cukup tinggi, karena melalui skenario kegagalan sistem didapatkan probabilitas kecelakaan parah yang sangat kecil.   ABSTRACT Fukushima accident has shown that severe accident could be occurred, therefore it is important to analyze safety level of nuclear power plants. Based on the recommendations of IAEA expert mission after the Fukushima accident

STELLAR, GAS, AND DARK MATTER CONTENT OF BARRED GALAXIES

Energy Technology Data Exchange (ETDEWEB)

Cervantes Sodi, Bernardo, E-mail: b.cervantes@crya.unam.mx [Instituto de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, Campus Morelia, A.P. 3-72, C.P. 58089 Michoacán, México (Mexico)

2017-01-20

We select a sample of galaxies from the Sloan Digital Sky Survey Data Release 7 (SDSS-DR7) where galaxies are classified, through visual inspection, as hosting strong bars, weak bars, or as unbarred galaxies, and make use of H i mass and kinematic information from the Arecibo Legacy Fast ALFA survey catalog, to study the stellar, atomic gas, and dark matter content of barred disk galaxies. We find, in agreement with previous studies, that the bar fraction increases with increasing stellar mass. A similar trend is found with total baryonic mass, although the dependence is not as strong as with stellar mass, due to the contribution of gas. The bar fraction shows a decrease with increasing gas mass fraction. This anticorrelation between the likelihood of a galaxy hosting a bar with the gas richness of the galaxy results from the inhibiting effect the gas has in the formation of bars. We also find that for massive galaxies with stellar masses larger than 10{sup 10} M {sub ⊙}, at fixed stellar mass, the bar fraction decreases with increasing global halo mass (i.e., halo mass measured up to a radius of the order of the H i disk extent).

Social branding to decrease smoking among young adults in bars.

Science.gov (United States)

Ling, Pamela M; Lee, Youn Ok; Hong, Juliette; Neilands, Torsten B; Jordan, Jeffrey W; Glantz, Stanton A

2014-04-01

We evaluated a Social Branding antitobacco intervention for "hipster" young adults that was implemented between 2008 and 2011 in San Diego, California. We conducted repeated cross-sectional surveys of random samples of young adults going to bars at baseline and over a 3-year follow-up. We used multinomial logistic regression to evaluate changes in daily smoking, nondaily smoking, and binge drinking, controlling for demographic characteristics, alcohol use, advertising receptivity, trend sensitivity, and tobacco-related attitudes. During the intervention, current (past 30 day) smoking decreased from 57% (baseline) to 48% (at follow-up 3; P = .002), and daily smoking decreased from 22% to 15% (P Branding campaigns are a promising strategy to decrease smoking in young adult bar patrons.

Analisis Neraca Air Lahan untuk Tanaman Padi dan Jagung Di Kota Bengkulu

Directory of Open Access Journals (Sweden)

Jaka A. I. Paski

2018-01-01

Citation: Paski, J.A.I., Faski, G.I.S.L., Handoyo, M.F. dan Pertiwi, D.A.S. (2017. Analisis Neraca Air Lahan untuk Tanaman Padi dan Jagung di Kota Bengkulu. Jurnal Ilmu Lingkungan, 15(2, 83-89, doi:10.14710/jil.15.2.83-89

Bar Study Stories. Issues in Prevention

Science.gov (United States)

Higher Education Center for Alcohol, Drug Abuse, and Violence Prevention, 2012

2012-01-01

This issue of "Issues in Prevention" focuses on the impact of the availability of drinks in licensed establishments, such as bars and taverns on student drinking. This issue contains the following articles: (1) Cheap Drinks at College Bars Can Escalate Student Drinking (John D. Clapp); (2) High Alcohol Outlet Density: A Problem for Campuses and…

Needle bar for warp knitting machines

Science.gov (United States)

Hagel, Adolf; Thumling, Manfred

1979-01-01

Needle bar for warp knitting machines with a number of needles individually set into slits of the bar and having shafts cranked to such an extent that the head section of each needle is in alignment with the shaft section accommodated by the slit. Slackening of the needles will thus not influence the needle spacing.

Snack bar compositions and their acute glycaemic and satiety effects.

Science.gov (United States)

Yan, Mary R; Parsons, Andrew; Whalley, Gillian A; Kelleher, John; Rush, Elaine C

Maintaining blood glucose within homeostatic limits and eating foods that sup-press hunger and promote satiety have beneficial impacts for health. This study investigated the glycaemic re-sponse and satiety effects of a serving size of a healthier snack bar, branded Nothing Else, that met the required nutrient profiling score criteria for a health claim, in comparison to two top-selling commercial snack bars. In an experimental study, 24 participants aged >=50 years were recruited. On three different days blood glucose concentration was measured twice at baseline and 15, 30, 45, 60, 90 and 120 minutes after consumption of a serving size of each bar. Satiety effects were self-reported hunger, fullness, desire to eat, and amount could eat ratings on visual analogue scales. The incremental area under the blood glucose response curve (iAUC) over two hours for the Nothing Else bar was 30% lower than commercial Bar 2 (pbar induced the highest fullness rating and lowest hunger rating among the three snack bars. At two hours, fullness induced by the Nothing Else bar was twice that of Bar 2 (p=0.019), but not different to Bar 1 (p=0.212). The Nothing Else snack bar developed using the nutrient profiling scheme as a guideline, with its high protein and dietary fibre contents, had a lower glycaemic impact and induced a higher subjective satiety than the two commercial snack bars of equal weight.

The BaBar Data Acquisition System

CERN Document Server

Scott, I; Grosso, P; Huffer, M E; O'Grady, C; Russell, J J

1999-01-01

The BaBar experiment at the Stanford Linear Accelerator Center is designed to perform a search for CP violation by ana-lyzing the decays of a very large sample of B and B(Bar) mesons produced at the high luminosity PEP-II accelerator. The data acquisition system must cope with a sustained high event rate, while supporting real time feature extraction and data compression with minimal dead time. The BaBar data acquisition system is based around a common VME interface to the electronics read-out of the separate detec-tor subsystems. Data from the front end electronics is read into commercial VME processors via a custom "Personality Card" and PCI interface. The commercial CPUs run the Tornado operating system to provide a platform for detector subsystem code to perform the necessary data processing. The data is read out via a non-blocking network switch to a farm of commercial UNIX processors. The current implementation of the BaBar data acquisition sys-tem has been shown to sustain a Level 1 trigger rate of 1.3...

Pengaruh Advance Organizer Berbasis Proyek Terhadap Kemampuan Analisis – Sintesis Siswa

Directory of Open Access Journals (Sweden)

Tasiwan -

2014-01-01

Full Text Available Penelitian ini dilakukan untuk mengetahui pengaruh model pengatur kemajuan (advance organizer berbasis proyek terhadap kemampuan analisis – sintesis siswa pada konsep Energi. Sebelum pembelajaran, diberikan tugas proyek pada siswa untuk merealisasikan bel listrik sederhana, rangkaian arus seri - paralel, dan tuas. Produk proyek digunakan sebagai advance organizer dalam pembelajaran di kelas. Penguatan kognitif dilakukan melalui diskusi kelompok dan pembuatan peta konsep, ekspositori guru di kelas, dan kegiatan eksperimen laboratorium. Data diambil melalui pretest, post test, observasi partisipatif pembelajaran oleh dua orang observer, penilaian produk, peta konsep dan laporan kegiatan eksperimen. Teknik analisis data meliputi uji prasyarat data dan uji hipotesis Hasil penelitian menunjukkan bahwa siswa mengalami peningkatan kemampuan analisis – sintesis dalam aspek menguraikan, mengkategorikan, mengidentifikasi, merumuskan pernyataan, merekonstruksi, menentukan konsep, dan menganalisis konsep dengan rata – rata peningkatan delta skor sebesar 54,46 %, uji t sebesar 6,4, dan skala gain sebesar 0,3. This study was conducted to determine the effect of project-based advance organizer model on student’s analysis - synthesis ability of the energy concept. Students were given an assignment to realize the project on simple electric bell, the series – parallel circuit, and lever, before learning. The products of project were used as an advanced organizer in the learning activity. Cognitive strengthening was done through group discussions and concept mapping, expository learning in the classroom, and laboratory experiments activities. The data were taken through a pretest, post-test, participant observation study by two observers, product assessment, concept maps and report of experiment activities. Results showed that the students’ analysis - synthesis ability increased in the aspect of describing, categorizing, identifying, statement

Mirrlees MB430 has 23 bar bmep potential

Energy Technology Data Exchange (ETDEWEB)

1985-04-01

Nominally rates at 1000 bhp per cylinder, the new Mirrlees Blackstone MB430 diesel engine with 430 mm bore and 480 mm stroke runs at 600 rev/min under bmep of 21 bar. Initially the engine has been released at 19 bar with the prospect of uprating to 23 bar bmep in due course. The performance testing of the engine is discussed.

ANALISIS BEBAN KERJA DENGAN MENGGUNAKAN METODE CVL DAN NASATLX DI PT. ABC

Directory of Open Access Journals (Sweden)

Renty Anugerah Mahaji Puteri

2017-10-01

Full Text Available PT. ABC merupakan perusahaan Jepang yang bergerak di bidang usaha jasa konstruksi mekanikal, elektrikal, dan system komunikasi. Sebagai perusahaan jasa konstruksi, PT. ABC dituntut untuk mencapai tujuan / target perusahaan tiap tahunnya yaitu mendapatkan tender proyek, maka tak jarang karyawannya dituntut untuk lembur. Seringnya karyawan lembur, maka menimbulkan masalah kelelahan terhadap para karyawannya sehingga target tidak tercapai. Penelitian ini bertujuan untuk mengevaluasi beban kerja yang dialami oleh engineer leader pada Departemen DesaindanOperasional di PT. ABC. Beban kerja yang diukur adalah beban kerja fisik dan mental. Beban kerja fisik diukur berdasarkan cardiovascular load (CVL. Beban kerja mental diukur dengan menggunakan metode NASA-Task Load Index (NASA-TLX. Berdasarkan hasil analisis CVL, beban kerja fisik yang diterima engineer proyek memiliki presentase CVL sebesar 31,16%, denganhasilperbaikanmenjadi 23,38%. Sedangkan dari hasil analisis NASA-TLX, beban kerja mental yang diterima engineer proyek yaitu dengan skor NASA-TLX 74,2% denganhasilperbaikanmenjadi 51,6%, sedangkan skor NASA-TLX engineer head office 61,5% denganhasilperbaikanmenjadi 47,66%.

Analisis Struktur Kristal Lifepo4 Olivine Sebagai Bahan Katoda Batere Li-Ion

Directory of Open Access Journals (Sweden)

Indra Gunawan

2013-10-01

Full Text Available Sintesis LiFePO4 dilakukan dengan pencampuran LiCl, FeCl2.4H2O dan H3PO4 ekuimolar ke dalam air. Homogenasi larutan dilakukan dengan pengaduk magnetic pada suhu 60o C. Prekursor LiFePO4 diperoleh setelah pemanasan 200o C dengan furnace selama 2 jam. Sintering prekursor LiFePO4 dilakukan pada suhu 700o C dengan furnace selama 4 jam dengan aliran N2 untuk membentuk fasa kristalit LiFePO4. Kemurnian fasa dan struktur kristal dianalisis dengan menggunakan XRD. Analisis struktur kristal dari pola difraksi sinar-X dilakukan dengan perangkat lunak FULLPROF. Pengamatan morfologinya dilakukan dengan menggunakan SEM dengan kombinasi energy dispersive spectroscopy (EDS dan pengukuran gugus fungsional dengan FT-IR. Hasil analisis struktur kristal menunjukkan bahwa senyawa LiFePO4 memiliki struktur Kristal orthorhombic, space group 62, simbol Pnma (Hermann-Mauguin dengan parameter kisi a= 6.0019999, b= 10.330000, c= 4.6999998. 

On isospin dependence of low energy N-bar N interaction

International Nuclear Information System (INIS)

Kudryavtsev, A.E.; Druzjinin, B.L.

1996-01-01

The amplitude analysis of the N-bar N scattering data at very low energies in zero-effective-range approximation to get a model-independent solution for N-bar N scattering lengths of definite isospin is performed. As input the recent experimental data on the p-bar p annihilation cross section below 100 MeV/c as well as the (p-bar p) atomic data are used. The analysis gives a possibility to get limitations on the N-bar N scattering lengths of definite isospin, but it is impossible to get the unique solution of the problem. Measurement of the charge-exchange cross section p-bar p → n-bar n at 120 MeV/c would be useful tool for getting the unambiguous solution of the problem. 18 refs., 6 figs., 3 tabs

Associated production of $H(b\\bar b, c \\bar c)$ with a $W$ or a $Z$ Boson in ATLAS

CERN Document Server

Nielsen, Jason; The ATLAS collaboration

2018-01-01

Results are presented from the ATLAS search for Standard Model Higgs bosons decaying to a $b\\bar b$ or $c \\bar c$ pair, produced in association with $W$ or $Z$ bosons. The analyzed data correspond to 36.1 fb$^{-1}$ of 13 TeV proton-proton collision data collected in Run 2 of the Large Hadron Collider. The combination of Run 1 and Run 2 data in the $b\\bar b$ channel yields a ratio of the measured production rate to the SM prediction equal to $0.90 \\pm 0.18 \\text{(stat.)} ^{+0.21}_{-0.19} \\text{(syst.)}$. The observed significance of $3.6\\sigma$ provides evidence for the direct $Hbb$ Yukawa coupling. A similar search for $c \\bar c$ decays results in an upper limit on the production cross section times branching ratio.

Analisis dan Rencana Pengembangan Jaringan Distribusi Air Bersih Unit Cabang Timur PDAM Kabupaten Klaten

Directory of Open Access Journals (Sweden)

Ana Tri Lestari

2017-01-01

Full Text Available Unit Cabang Timur Perusahaan Daerah Air Minum (PDAM Kabupaten Klaten dibagi menjadi 3 unit pelayanan Ibu Kota Kecamatan (IKK dan mempunyai tingkat pelayanan yang masih rendah pada tahun 2015, yaitu Unit IKK Ceper 17,6%; Unit IKK Pedan 2,43%; dan Unit IKK Cawas 31,26% sehingga peningkatan persen pelayanan menjadi hal yang perlu dilakukan. Hal ini didukung dengan adanya penambahan debit produksi sebesar 50 liter/detik. Selain itu, jaringan distibusi belum dibentuk blok pelayanan sehingga sulit untuk mengontrol kehilangan air. Perencanaan ini dilakukan pembagian blok pelayanan menjadi 26 blok dan 5 tapping. Setelah itu dilakukan analisis kondisi eksiting. Hasil analisis kondisi eksisting menunjukkan kondisi hidrolika perpipaan kecuali kecepatan masih memenuhi kriteria, yaitu tekanan antara (15,43-59,99 m, kecepatan (0-0,91 m/detik, unit headloss (0-3,51 m/km. Kemudian dilakukan pengembangan jaringan yang dibagi menjadi 2 tahap, dimana tahap 1 meningkatkan persen pelayanan, sedangkan tahap 2 menambah daerah pelayanan baru. Blok pelayanan setelah pengembangan menjadi 29 blok dan 5 titik tapping. Kemudian analisis rencana pengembangan dilakukan dan menunjukkan bahwa kondisi hidrolika pipa untuk tekanan di jaringan distribusi IKK Cawas bernilai negatif. Hal ini dikarenakan unit headloss yang terjadi pada pipa dari reservoir menuju titik tapping pertama IKK Cawas sebesar 5,78 m/km dengan panjang pipa 14,35 km sehingga headloss  sebesar 82,94 m menyebabkan tekanan menjadi -2,89 m. Permasalahan ini dapat diatasi dengan parallel pipa diameter 200 mm sepanjang 9 km. Parallel pipa tersebut mengakibatkan tekanan  pada titik tapping pertama IKK Cawas menjadi 34,65 m dan titik tapping terjauh (blok 19 sebesar 16,34 m.  Hasil analisis hidrolika, seperti unit headloss berada pada rentang (0-5,78 m/km, namun kecepatan masih ada yang di bawah 0,3 m/detik. Rencana anggaran biaya (RAB yang dibutuhkan untuk melakukan pengembangan jaringan sebesar Rp 2.470.153,051.71.

Pectus bar removal: surgical technique and strategy to avoid complications.

Science.gov (United States)

Park, Hyung Joo; Kim, Kyung Soo

2016-01-01

Pectus bar removal is the final stage of the procedure for minimally invasive repair of pectus excavatum. Based on our experience with one of the largest scale data, we would like to address the important issues in pectus bar removal, such as appropriate duration of bar maintenance, techniques for bar removal, and strategies to avoid complications. Between September 1999 and August 2015, we operated on 2,553 patients with pectus excavatum and carinatum using pectus bars for a minimally invasive approach. Among them, 1,821 patients (71.3%) underwent pectus bar removal as a final stage of pectus deformity repair, and their data were analyzed retrospectively to identify the outcomes and adverse effects of the pectus bar removal procedure. The mean age of the patients was 9.13 years (range, 16 months to 44 years) and the male to female ratio was 3.55. The study is approved by the Institutional Review Board (IRB), the ethical committee of Seoul St. Mary's Hospital. The IRB has exempted the informed consent from every patient in this study due to this is a retrospective chart review without revealing any patients' personal data. Our technique involved straightening of the bar in a supine position. The overall mean duration of pectus bar maintenance was 2.57 years (range, 4 months to 14 years). The mean duration was 2.02 years (range, 4 months to 7 years) for children under 12 years, 2.99 years (range, 7 months to 9 years) for teenagers aged 12-20 years, and 3.53 years (range, 3 months to 14 years) for adults over 20 years. Forty-eight patients (2.6%) underwent bar removal more than 5 years after bar insertion and 58 patients (3.2%) underwent bar removal earlier than initially planned. The most common adverse reaction after bar removal was wound seroma including infection (43 patients, 2.36%). Recurrence after bar removal occurred in nine patients (0.49%), and seven of these required redo repair (0.38%). Pectus bar removal is a safe and straightforward procedure with a

HCN(1-0) enhancement in the bar of NGC 2903

Science.gov (United States)

Leon, S.; Jeyakumar, S.; Pérez-Ramírez, D.; Verdes-Montenegro, L.; Lee, S. W.; Ocaña Flaquer, B.

2008-12-01

We have mapped the HCN(1-0) emission from two spiral galaxies, NGC 2903 and NGC 3504 to study the gas properties in the bars. The HCN(1-0) emission is detected in the center and along the bar of NGC 2903. The line ratio HCN(1-0)/ 12CO(1-0) ranges from 0.07 to 0.12 with the lowest value in the center. The enhancement of HCN(1-0) emission along the bar indicates a higher fraction of dense molecular gas in the bar than at the center. The mass of dense molecular gas in the center (2.2 × 107 M⊙) is about 6 times lower than that in the bar (1.2 × 108 M⊙). The total star formation rate (SFR) is estimated to be 1.4 M⊙ yr-1, where the SFR at the center is 1.9 times higher than that in the bar. The time scale of consumption of the dense molecular gas in the center is about ~ 3 × 107 yr which is much shorter than that in the bar of about 2 to 10 × 108 yr. The dynamical time scale of inflow of the gas from the bar to the center is shorter than the consumption time scale in the bar, which suggests that the star formation (SF) activity at the center is not deprived of fuel. In the bar, the fraction of dense molecular gas mass relative to the total molecular gas mass is twice as high along the leading edge than along the central axis of the bar. The HCN(1-0) emission has a large velocity dispersion in the bar, which can be attributed partially to the streaming motions indicative of shocks along the bar. In NGC 3504, the HCN(1-0) emission is detected only at the center. The fraction of dense molecular gas mass in the center is about 15%. Comparison of the SFR with the predictions from numerical simulations suggest that NGC 2903 harbors a young type B bar with a strong inflow of gas toward the center whereas NGC 3504 has an older bar and has already passed the phase of inflow of gas toward the center.

Analisis Karakteristik Hujan untuk Pendugaan Debit Aliran Rencana Sungai Anafri di Kota Jayapura

Directory of Open Access Journals (Sweden)

Nurfaijin Nurfaijin

2016-10-01

Full Text Available ABSTRAK Penelitian ini bertujuan mengkaji karakteristik hujan wilayah DAS Anafri, menghitung debit aliran rencana, dan mengkaji kapasitas Sungai Anafri dalam merespon pengalihragaman hujan menjadi aliran permukaan. Kajian karakteristik hujan yakni ketebalan, intensitas, dan durasi hujan dilakukan dengan analisis statistik data hujan. Analisis distribusi data hujan diasumsikan sesuai dengan Metode Gumbel, sehingga untuk menentukan hujan periode ulang 2 tahun, 5 tahun, 10 tahun, dan 25 tahun menggunakan persamaan Gumbel. Hujan periode ulang digunakan untuk menghitung debit aliran rencana Metode Rasional. Analisis kapasitas sungai dilakukan dengan membandingkan debit aliran rencana dalam periode ulang T dengan kapasitas sungai. Penghitungan kapasitas sungai dilakukan pada penampang PI (bagian hulu, P2,dan P3 (bagian hilir. Debit aliran rencana yang digunakan dalam analisis kapasitas sungai adalah debit aliran Q25tahun (107,478 m³/detikdan 163,726 m³/detik. Hasil analisis menunjukan bahawa, terjadinya limpasan pada penampang sungai PI dan P2 pada saat menampung debit banjir yang diketahui penyebab utamanya adalah bank full capacity kecil, maka alternat! ( penanganan yang direkomendasikan adalah peninggian tanggul sungai. Analisis kapasitas sungai menggunakan debit banjir periode ulang 25 tahun menunjukan bahwa, terjadi limpasan pada lokasi penampang PI sampai P2 dengan panjang ruas 400 m yang terjadi pada tanggul sisi kanan dan tanggul sisi kiri dengan panjang ruas 40 meter. Limpasan terjadi setinggi 0,1 m hingga 1,6 m pada tanggul sisi kanan dan 0,1 m hingga 0,3 m pada tanggul sisi kiri, sehingga peninggian tanggul yang direkomendasikan adalah setinggi 1,6 mpada sisi kanan dan 0,3 m pada tanggul sisi kiri. ABSTRACT This study aims to examine the characteristics of rainfall watershed of Anafri calculate the flow rate plan, and assess the river capacity to respond diversion of rain to be surface runoff. In this study, the analysis of rainfall

The hydrogen 700 project - 700 Bar Co

International Nuclear Information System (INIS)

Gambone, L.; Webster, C.

2004-01-01

'Full text:' Major automotive companies, including DaimlerChrysler, Ford, Hyundai, Nissan, PSA Peugeot-Citroen, and Toyota, are co-operating in the Hydrogen 700 project at Powertech to establish a global basis for high pressure hydrogen fuel systems for vehicles. The fuel systems will store compressed hydrogen on-board at pressures up to 700 bar (10,000psi). It is anticipated that the 700 bar storage pressure will provide hydrogen powered vehicles with a range comparable to the range of petroleum-fueled vehicles. The Hydrogen 700 project has contracted world leaders in high pressure technologies to provide 700 bar fuel system components for evaluation. The data from these tests will be used as the basis for the development of relevant standards and regulations. In a development that complements the Hydrogen 700 project, Powertech Labs has established the world's first 700 bar hydrogen station for fast filling operations. This prototype station will be used to evaluate the performance of the 700 bar vehicle fuel system components. The presentation will provide an overview of the Hydrogen 700 project. Safety issues surrounding the use of compressed hydrogen gas as a vehicle fuel, as well as the use of higher storage pressures, will be reviewed. Test data involving the fire testing of vehicles containing hydrogen fuel systems will be presented. The project is intended to result in the introduction of 700 bar fuel systems in the next generation of hydrogen powered vehicles. (author)

Do Low Surface Brightness Galaxies Host Stellar Bars?

International Nuclear Information System (INIS)

Cervantes Sodi, Bernardo; Sánchez García, Osbaldo

2017-01-01

With the aim of assessing if low surface brightness galaxies host stellar bars and by studying the dependence of the occurrence of bars as a function of surface brightness, we use the Galaxy Zoo 2 data set to construct a large volume-limited sample of galaxies and then segregate these galaxies as having low or high surface brightness in terms of their central surface brightness. We find that the fraction of low surface brightness galaxies hosting strong bars is systematically lower than that found for high surface brightness galaxies. The dependence of the bar fraction on the central surface brightness is mostly driven by a correlation of the surface brightness with the spin and the gas richness of the galaxies, showing only a minor dependence on the surface brightness. We also find that the length of the bars is strongly dependent on the surface brightness, and although some of this dependence is attributed to the gas content, even at a fixed gas-to-stellar mass ratio, high surface brightness galaxies host longer bars than their low surface brightness counterparts, which we attribute to an anticorrelation of the surface brightness with the spin.

Do Low Surface Brightness Galaxies Host Stellar Bars?

Energy Technology Data Exchange (ETDEWEB)

Cervantes Sodi, Bernardo; Sánchez García, Osbaldo, E-mail: b.cervantes@irya.unam.mx, E-mail: o.sanchez@irya.unam.mx [Instituto de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, Campus Morelia, A.P. 3-72, C.P. 58089 Michoacán, México (Mexico)

2017-09-20

With the aim of assessing if low surface brightness galaxies host stellar bars and by studying the dependence of the occurrence of bars as a function of surface brightness, we use the Galaxy Zoo 2 data set to construct a large volume-limited sample of galaxies and then segregate these galaxies as having low or high surface brightness in terms of their central surface brightness. We find that the fraction of low surface brightness galaxies hosting strong bars is systematically lower than that found for high surface brightness galaxies. The dependence of the bar fraction on the central surface brightness is mostly driven by a correlation of the surface brightness with the spin and the gas richness of the galaxies, showing only a minor dependence on the surface brightness. We also find that the length of the bars is strongly dependent on the surface brightness, and although some of this dependence is attributed to the gas content, even at a fixed gas-to-stellar mass ratio, high surface brightness galaxies host longer bars than their low surface brightness counterparts, which we attribute to an anticorrelation of the surface brightness with the spin.

Economic Impact of Smoke-Free Legislation: Did the Spanish Tobacco Control Law Affect the Economic Activity of Bars and Restaurants?

Science.gov (United States)

García-Altés, Anna; Pinilla, Jaime; Marí-Dell'Olmo, Marc; Fernández, Esteve; López, Maria José

2015-11-01

The potential of smoke-free bans to negatively impact the hospitality business has been an argument of the hospitality and tobacco industry against such legislation. A partial smoke-free legislation was introduced in Spain in 2006 allowing smoking in most bars and restaurants due to the pressure of the hospitality sector. However, this partial ban was later amended in 2011 to include all the hospitality premises without exceptions. The stepped Spanish process permits to evaluate whether the entry into force of the smoke-free legislation had any effect on the economic activity of the hospitality sector. We employed a pooled time series cross-sectional design, with national data over 6 years (2006-2011). The dependent variable used was the total number of bars and restaurants per 100,000 inhabitants. The explanatory variables used were the average amount of spending per household in bars and restaurants, and the total unemployment rate in Spain by regions. For every 1% increase in the unemployment rate there was a 0.05% decrease in the number of bars and restaurants. In 2007, the number of bars and restaurants was significantly reduced by 13.06% (all others factors being held constant), 4.87% in 2008, and 10.42% in 2009. No statistically significant effect of the smoke-free legislation emerged from 2010 (6.76%) to 2011 (7.69%). The new Spanish smoke-free legislation had no effect on the number of bars and restaurants. © The Author 2015. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

RING STAR FORMATION RATES IN BARRED AND NONBARRED GALAXIES

International Nuclear Information System (INIS)

Grouchy, R. D.; Buta, R. J.; Salo, H.; Laurikainen, E.

2010-01-01

Nonbarred ringed galaxies are relatively normal galaxies showing bright rings of star formation in spite of lacking a strong bar. This morphology is interesting because it is generally accepted that a typical galactic disk ring forms when material collects near a resonance, set up by the pattern speed of a bar or bar-like perturbation. Our goal in this paper is to examine whether the star formation properties of rings are related to the strength of a bar or, in the absence of a bar, to the non-axisymmetric gravity potential in general. For this purpose, we obtained Hα emission line images and calculated the line fluxes and star formation rates (SFRs) for 16 nonbarred SA galaxies and four weakly barred SAB galaxies with rings. For comparison, we combine our new observations with a re-analysis of previously published data on five SA, seven SAB, and 15 SB galaxies with rings, three of which are duplicates from our sample. With these data, we examine what role a bar may play in the star formation process in rings. Compared to barred ringed galaxies, we find that the inner ring SFRs and Hα+[N II] equivalent widths in nonbarred ringed galaxies show a similar range and trend with absolute blue magnitude, revised Hubble type, and other parameters. On the whole, the star formation properties of inner rings, excluding the distribution of H II regions, are independent of the ring shapes and the bar strength in our small samples. We confirm that the deprojected axis ratios of inner rings correlate with maximum relative gravitational force Q g ; however, if we consider all rings, a better correlation is found when a local bar forcing at the radius of the ring, Q r , is used. Individual cases are described and other correlations are discussed. By studying the physical properties of these galaxies, we hope to gain a better understanding of their placement in the scheme of the Hubble sequence and how they formed rings without the driving force of a bar.

Analisis “Brand Equity” Siaran Berita Stasiun Televisi Swasta Indonesia

OpenAIRE

Arif Sugiono; Prima Mulyasari Agustina

2004-01-01

Penelitian ini bertujuan untuk mengetahui keadaan berbagai merek siaran berita stasiun televisi swasta berdasarkan dimensi ekuitas mereknya, dengan memfokuskan pada empat dimensi ekuitas merek, yang meliputi loyalitas merek, kesadaran merek, persepsi kualitas, dan asosiasi merek. Metode yang digunakan metode deskriptif, dengan analisis data menggunakan tabulasi dan teknik skala. Hasil penelitian dari dimensi loyalitas merek tiga besar siaran berita secara berurutan adalah Buser, Patroli dan L...

The d-bar - u-bar asymmetry of the proton in a pion cloud model approach

International Nuclear Information System (INIS)

Magnin, J.; Christiansen, H.R.

1999-03-01

We study the d-bar - u-bar asymmetry of the proton in a model approach in which hadronic fluctuations of the nucleon are generated through gluon splitting and recombination mechanisms. Within this framework, it is shown that the d -u asymmetry of the proton is consistently described by including only nucleon fluctuations to |πN> and |πΔ> bound states. Predictions of the model closely agree with the recent experimental data of the E-866/Nu Sea Collaboration. (author)

The X-Bar Theory of Phrase Structure.

Science.gov (United States)

Kornai, Andras; Pullman, Geoffrey K.

1990-01-01

This paper demonstrates that a formalization of the content of X-bar theory reveals very little substance in its claims. Six conditions that encapsulate X-bar theory are discussed: lexicality, succession, uniformity, maximality, centrality, and optionality. (50 references) (JL)

A Review of the Biomechanical Differences Between the High-Bar and Low-Bar Back-Squat.

Science.gov (United States)

Glassbrook, Daniel J; Helms, Eric R; Brown, Scott R; Storey, Adam G

2017-09-01

Glassbrook, DJ, Helms, ER, Brown, SR, and Storey, AG. A review of the biomechanical differences between the high-bar and low-bar back-squat. J Strength Cond Res 31(9): 2618-2634, 2017-The back-squat is a common exercise in strength and conditioning for a variety of sports. It is widely regarded as a fundamental movement to increase and measure lower-body and trunk function, as well as an effective injury rehabilitation exercise. There are typically 2 different bar positions used when performing the back-squat: the traditional "high-bar" back-squat (HBBS) and the "low-bar" back-squat (LBBS). Different movement strategies are used to ensure that the center of mass remains in the base of support for balance during the execution of these lifts. These movement strategies manifest as differences in (a) joint angles, (b) vertical ground reaction forces, and (c) the activity of key muscles. This review showed that the HBBS is characterized by greater knee flexion, lesser hip flexion, a more upright torso, and a deeper squat. The LBBS is characterized by greater hip flexion and, therefore, a greater forward lean. However, there are limited differences in vertical ground reaction forces between the HBBS and LBBS. The LBBS can also be characterized by a greater muscle activity of the erector spinae, adductors, and gluteal muscles, whereas the HBBS can be characterized by greater quadriceps muscle activity. Practitioners seeking to develop the posterior-chain hip musculature (i.e., gluteal, hamstring, and erector muscle groups) may seek to use the LBBS. In comparison, those seeking to replicate movements with a more upright torso and contribution from the quadriceps may rather seek to use the HBBS in training.

THE RELATION BETWEEN DYNAMICS AND STAR FORMATION IN BARRED GALAXIES

International Nuclear Information System (INIS)

Martinez-Garcia, Eric E.; Gonzalez-Lopezlira, Rosa A.

2011-01-01

We analyze optical and near-infrared data of a sample of 11 barred spiral galaxies, in order to establish a connection between star formation and bar/spiral dynamics. We find that 22 regions located in the bars and 20 regions in the spiral arms beyond the end of the bar present azimuthal color/age gradients that may be attributed to star formation triggering. Assuming a circular motion dynamic model, we compare the observed age gradient candidates with stellar population synthesis models. A link can then be established with the disk dynamics that allows us to obtain parameters like the pattern speed of the bar or spiral as well as the positions of resonance radii. We subsequently compare the derived pattern speeds with those expected from theoretical and observational results in the literature (e.g., bars ending near corotation). We find a tendency to overestimate bar pattern speeds derived from color gradients in the bar at small radii, away from corotation; this trend can be attributed to non-circular motions of the young stars born in the bar region. In spiral regions, we find that ∼50% of the color gradient candidates are 'inverse', i.e., with the direction of stellar aging contrary to that of rotation. The other half of the gradients found in spiral arms have stellar ages that increase in the same sense as rotation. Of the nine objects with gradients in both bars and spirals, six (67%) appear to have a bar and a spiral with similar Ω p , while three (33%) do not.

Modeling Droplet Heat and Mass Transfer during Spray Bar Pressure Control of the Multipurpose Hydrogen Test Bed (MHTB) Tank in Normal Gravity

Science.gov (United States)

Kartuzova, O.; Kassemi, M.

2016-01-01

A CFD model for simulating pressure control in cryogenic storage tanks through the injection of a subcooled liquid into the ullage is presented and applied to the 1g MHTB spray bar cooling experiments. An Eulerian-Lagrangian approach is utilized to track the spray droplets and capture the interaction between the discrete droplets and the continuous ullage phase. The spray model is coupled with the VOF model by performing particle tracking in the ullage, removing particles from the ullage when they reach the interface, and then adding their contributions to the liquid. A new model for calculating the droplet-ullage heat and mass transfer is developed. In this model, a droplet is allowed to warm up to the saturation temperature corresponding to the ullage vapor pressure, after which it evaporates while remaining at the saturation temperature. The droplet model is validated against the results of the MHTB spray-bar cooling experiments with 50% and 90% tank fill ratios. The predictions of the present T-sat based model are compared with those of a previously developed kinetic-based droplet mass transfer model. The predictions of the two models regarding the evolving tank pressure and temperature distributions, as well as the droplets' trajectories and temperatures, are examined and compared in detail. Finally, the ullage pressure and local vapor and liquid temperature evolutions are validated against the corresponding data provided by the MHTB spray bar mixing experiment.

Measurement of the $\\bar{B}_s^0\\to D_s^-D_s^+$ and $\\bar{B}_s^0\\to D^-D_s^+$ effective lifetimes

CERN Document Server

Aaij, R.; Adinolfi, M.; Affolder, A.; Ajaltouni, Z.; Albrecht, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; Alvarez Cartelle, P.; Alves Jr, A.A.; Amato, S.; Amerio, S.; Amhis, Y.; Anderlini, L.; Anderson, J.; Andreassen, R.; Andreotti, M.; Andrews, J.E.; Appleby, R.B.; Aquines Gutierrez, O.; Archilli, F.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Bachmann, S.; Back, J.J.; Badalov, A.; Balagura, V.; Baldini, W.; Barlow, R.J.; Barschel, C.; Barsuk, S.; Barter, W.; Batozskaya, V.; Bauer, Th.; Bay, A.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Belogurov, S.; Belous, K.; Belyaev, I.; Ben-Haim, E.; Bencivenni, G.; Benson, S.; Benton, J.; Berezhnoy, A.; Bernet, R.; Bettler, M.O.; van Beuzekom, M.; Bien, A.; Bifani, S.; Bird, T.; Bizzeti, A.; Bjornstad, P.M.; Blake, T.; Blanc, F.; Blouw, J.; Blusk, S.; Bocci, V.; Bondar, A.; Bondar, N.; Bonivento, W.; Borghi, S.; Borgia, A.; Borsato, M.; Bowcock, T.J.V.; Bowen, E.; Bozzi, C.; Brambach, T.; van den Brand, J.; Bressieux, J.; Brett, D.; Britsch, M.; Britton, T.; Brook, N.H.; Brown, H.; Bursche, A.; Busetto, G.; Buytaert, J.; Cadeddu, S.; Calabrese, R.; Callot, O.; Calvi, M.; Calvo Gomez, M.; Camboni, A.; Campana, P.; Campora Perez, D.; Carbone, A.; Carboni, G.; Cardinale, R.; Cardini, A.; Carranza-Mejia, H.; Carson, L.; Carvalho Akiba, K.; Casse, G.; Garcia, L.Castillo; Cattaneo, M.; Cauet, Ch.; Cenci, R.; Charles, M.; Charpentier, Ph.; Cheung, S.F.; Chiapolini, N.; Chrzaszcz, M.; Ciba, K.; Cid Vidal, X.; Ciezarek, G.; Clarke, P.E.L.; Clemencic, M.; Cliff, H.V.; Closier, J.; Coca, C.; Coco, V.; Cogan, J.; Cogneras, E.; Collins, P.; Comerma-Montells, A.; Contu, A.; Cook, A.; Coombes, M.; Coquereau, S.; Corti, G.; Couturier, B.; Cowan, G.A.; Craik, D.C.; Cruz Torres, M.; Cunliffe, S.; Currie, R.; D'Ambrosio, C.; Dalseno, J.; David, P.; David, P.N.Y.; Davis, A.; De Bonis, I.; De Bruyn, K.; De Capua, S.; De Cian, M.; de Miranda, J.M.; De Paula, L.; De Silva, W.; De Simone, P.; Decamp, D.; Deckenhoff, M.; Del Buono, L.; Deleage, N.; Derkach, D.; Deschamps, O.; Dettori, F.; Di Canto, A.; Dijkstra, H.; Donleavy, S.; Dordei, F.; Dorosz, P.; Dosil Suarez, A.; Dossett, D.; Dovbnya, A.; Dupertuis, F.; Durante, P.; Dzhelyadin, R.; Dziurda, A.; Dzyuba, A.; Easo, S.; Egede, U.; Egorychev, V.; Eidelman, S.; van Eijk, D.; Eisenhardt, S.; Eitschberger, U.; Ekelhof, R.; Eklund, L.; El Rifai, I.; Elsasser, Ch.; Falabella, A.; Farber, C.; Farinelli, C.; Farry, S.; Ferguson, D.; Fernandez Albor, V.; Ferreira Rodrigues, F.; Ferro-Luzzi, M.; Filippov, S.; Fiore, M.; Fiorini, M.; Fitzpatrick, C.; Fontana, M.; Fontanelli, F.; Forty, R.; Francisco, O.; Frank, M.; Frei, C.; Frosini, M.; Furfaro, E.; Gallas Torreira, A.; Galli, D.; Gandelman, M.; Gandini, P.; Gao, Y.; Garofoli, J.; Garosi, P.; Garra Tico, J.; Garrido, L.; Gaspar, C.; Gauld, R.; Gersabeck, E.; Gersabeck, M.; Gershon, T.; Ghez, Ph.; Gianelle, A.; Gibson, V.; Giubega, L.; Gligorov, V.V.; Gobel, C.; Golubkov, D.; Golutvin, A.; Gomes, A.; Gordon, H.; Grabalosa Gandara, M.; Graciani Diaz, R.; Granado Cardoso, L.A.; Grauges, E.; Graziani, G.; Grecu, A.; Greening, E.; Gregson, S.; Griffith, P.; Grillo, L.; Grunberg, O.; Gui, B.; Gushchin, E.; Guz, Yu.; Gys, T.; Hadjivasiliou, C.; Haefeli, G.; Haen, C.; Hafkenscheid, T.W.; Haines, S.C.; Hall, S.; Hamilton, B.; Hampson, T.; Hansmann-Menzemer, S.; Harnew, N.; Harnew, S.T.; Harrison, J.; Hartmann, T.; He, J.; Head, T.; Heijne, V.; Hennessy, K.; Henrard, P.; Hernando Morata, J.A.; van Herwijnen, E.; Hess, M.; Hicheur, A.; Hill, D.; Hoballah, M.; Hombach, C.; Hulsbergen, W.; Hunt, P.; Huse, T.; Hussain, N.; Hutchcroft, D.; Hynds, D.; Iakovenko, V.; Idzik, M.; Ilten, P.; Jacobsson, R.; Jaeger, A.; Jans, E.; Jaton, P.; Jawahery, A.; Jing, F.; John, M.; Johnson, D.; Jones, C.R.; Joram, C.; Jost, B.; Jurik, N.; Kaballo, M.; Kandybei, S.; Kanso, W.; Karacson, M.; Karbach, T.M.; Kenyon, I.R.; Ketel, T.; Khanji, B.; Klaver, S.; Kochebina, O.; Komarov, I.; Koopman, R.F.; Koppenburg, P.; Korolev, M.; Kozlinskiy, A.; Kravchuk, L.; Kreplin, K.; Kreps, M.; Krocker, G.; Krokovny, P.; Kruse, F.; Kucharczyk, M.; Kudryavtsev, V.; Kurek, K.; Kvaratskheliya, T.; La Thi, V.N.; Lacarrere, D.; Lafferty, G.; Lai, A.; Lambert, D.; Lambert, R.W.; Lanciotti, E.; Lanfranchi, G.; Langenbruch, C.; Latham, T.; Lazzeroni, C.; Le Gac, R.; van Leerdam, J.; Lees, J.P.; Lefevre, R.; Leflat, A.; Lefrancois, J.; Leo, S.; Leroy, O.; Lesiak, T.; Leverington, B.; Li, Y.; Liles, M.; Lindner, R.; Linn, C.; Lionetto, F.; Liu, B.; Liu, G.; Lohn, S.; Longstaff, I.; Lopes, J.H.; Lopez-March, N.; Lowdon, P.; Lu, H.; Lucchesi, D.; Luisier, J.; Luo, H.; Luppi, E.; Lupton, O.; Machefert, F.; Machikhiliyan, I.V.; Maciuc, F.; Maev, O.; Malde, S.; Manca, G.; Mancinelli, G.; Maratas, J.; Marconi, U.; Marino, P.; Marki, R.; Marks, J.; Martellotti, G.; Martens, A.; Martin Sanchez, A.; Martinelli, M.; Martinez Santos, D.; Martins Tostes, D.; Martynov, A.; Massafferri, A.; Matev, R.; Mathe, Z.; Matteuzzi, C.; Mazurov, A.; McCann, M.; McCarthy, J.; McNab, A.; McNulty, R.; McSkelly, B.; Meadows, B.; Meier, F.; Meissner, M.; Merk, M.; Milanes, D.A.; Minard, M.N.; Molina Rodriguez, J.; Monteil, S.; Moran, D.; Morandin, M.; Morawski, P.; Morda, A.; Morello, M.J.; Mountain, R.; Mous, I.; Muheim, F.; Muller, K.; Muresan, R.; Muryn, B.; Muster, B.; Naik, P.; Nakada, T.; Nandakumar, R.; Nasteva, I.; Needham, M.; Neubert, S.; Neufeld, N.; Nguyen, A.D.; Nguyen, T.D.; Nguyen-Mau, C.; Nicol, M.; Niess, V.; Niet, R.; Nikitin, N.; Nikodem, T.; Novoselov, A.; Oblakowska-Mucha, A.; Obraztsov, V.; Oggero, S.; Ogilvy, S.; Okhrimenko, O.; Oldeman, R.; Onderwater, G.; Orlandea, M.; Otalora Goicochea, J.M.; Owen, P.; Oyanguren, A.; Pal, B.K.; Palano, A.; Palutan, M.; Panman, J.; Papanestis, A.; Pappagallo, M.; Pappalardo, L.; Parkes, C.; Parkinson, C.J.; Passaleva, G.; Patel, G.D.; Patel, M.; Patrignani, C.; Pavel-Nicorescu, C.; Pazos Alvarez, A.; Pearce, A.; Pellegrino, A.; Penso, G.; Pepe Altarelli, M.; Perazzini, S.; Perez Trigo, E.; Perret, P.; Perrin-Terrin, M.; Pescatore, L.; Pesen, E.; Pessina, G.; Petridis, K.; Petrolini, A.; Picatoste Olloqui, E.; Pietrzyk, B.; Pilar, T.; Pinci, D.; Playfer, S.; Plo Casasus, M.; Polci, F.; Polok, G.; Poluektov, A.; Polycarpo, E.; Popov, A.; Popov, D.; Popovici, B.; Potterat, C.; Powell, A.; Prisciandaro, J.; Pritchard, A.; Prouve, C.; Pugatch, V.; Puig Navarro, A.; Punzi, G.; Qian, W.; Rachwal, B.; Rademacker, J.H.; Rakotomiaramanana, B.; Rama, M.; Rangel, M.S.; Raniuk, I.; Rauschmayr, N.; Raven, G.; Redford, S.; Reichert, S.; Reid, M.M.; dos Reis, A.C.; Ricciardi, S.; Richards, A.; Rinnert, K.; Rives Molina, V.; Roa Romero, D.A.; Robbe, P.; Roberts, D.A.; Rodrigues, A.B.; Rodrigues, E.; Rodriguez Perez, P.; Roiser, S.; Romanovsky, V.; Vidal, A.Romero; Rotondo, M.; Rouvinet, J.; Ruf, T.; Ruffini, F.; Ruiz, H.; Valls, P.Ruiz; Sabatino, G.; Saborido Silva, J.J.; Sagidova, N.; Sail, P.; Saitta, B.; Salustino Guimaraes, V.; Sanmartin Sedes, B.; Santacesaria, R.; Santamarina Rios, C.; Santovetti, E.; Sapunov, M.; Sarti, A.; Satriano, C.; Satta, A.; Savrie, M.; Savrina, D.; Schiller, M.; Schindler, H.; Schlupp, M.; Schmelling, M.; Schmidt, B.; Schneider, O.; Schopper, A.; Schune, M.H.; Schwemmer, R.; Sciascia, B.; Sciubba, A.; Seco, M.; Semennikov, A.; Senderowska, K.; Sepp, I.; Serra, N.; Serrano, J.; Seyfert, P.; Shapkin, M.; Shapoval, I.; Shcheglov, Y.; Shears, T.; Shekhtman, L.; Shevchenko, O.; Shevchenko, V.; Shires, A.; Coutinho, R.Silva; Simi, G.; Sirendi, M.; Skidmore, N.; Skwarnicki, T.; Smith, N.A.; Smith, E.; Smith, E.; Smith, J.; Smith, M.; Snoek, H.; Sokoloff, M.D.; Soler, F.J.P.; Soomro, F.; Souza, D.; Souza De Paula, B.; Spaan, B.; Sparkes, A.; Spradlin, P.; Stagni, F.; Stahl, S.; Steinkamp, O.; Stevenson, S.; Stoica, S.; Stone, S.; Storaci, B.; Stracka, S.; Straticiuc, M.; Straumann, U.; Stroili, R.; Subbiah, V.K.; Sun, L.; Sutcliffe, W.; Swientek, S.; Syropoulos, V.; Szczekowski, M.; Szczypka, P.; Szilard, D.; Szumlak, T.; T'Jampens, S.; Teklishyn, M.; Tellarini, G.; Teodorescu, E.; Teubert, F.; Thomas, C.; Thomas, E.; van Tilburg, J.; Tisserand, V.; Tobin, M.; Tolk, S.; Tomassetti, L.; Tonelli, D.; Topp-Joergensen, S.; Torr, N.; Tournefier, E.; Tourneur, S.; Tran, M.T.; Tresch, M.; Tsaregorodtsev, A.; Tsopelas, P.; Tuning, N.; Garcia, M.Ubeda; Ukleja, A.; Ustyuzhanin, A.; Uwer, U.; Vagnoni, V.; Valenti, G.; Vallier, A.; Vazquez Gomez, R.; Vazquez Regueiro, P.; Vazquez Sierra, C.; Vecchi, S.; Velthuis, J.J.; Veltri, M.; Veneziano, G.; Vesterinen, M.; Viaud, B.; Vieira, D.; Vilasis-Cardona, X.; Vollhardt, A.; Volyanskyy, D.; Voong, D.; Vorobyev, A.; Vorobyev, V.; Voss, C.; Voss, H.; de Vries, J.A.; Waldi, R.; Wallace, C.; Wallace, R.; Wandernoth, S.; Wang, J.; Ward, D.R.; Warrington, N.; Watson, N.K.; Webber, A.D.; Websdale, D.; Whitehead, M.; Wicht, J.; Wiechczynski, J.; Wiedner, D.; Wiggers, L.; Wilkinson, G.; Williams, M.P.; Williams, M.; Wilson, F.F.; Wimberley, J.; Wishahi, J.; Wislicki, W.; Witek, M.; Wormser, G.; Wotton, S.A.; Wright, S.; Wu, S.; Wyllie, K.; Xie, Y.; Xing, Z.; Yang, Z.; Yuan, X.; Yushchenko, O.; Zangoli, M.; Zavertyaev, M.; Zhang, F.; Zhang, L.; Zhang, W.C.; Zhang, Y.; Zhelezov, A.; Zhokhov, A.; Zhong, L.; Zvyagin, A.

2014-01-01

The first measurement of the effective lifetime of the $\\bar{B}_s^0$ meson in the decay $\\bar{B}_s^0\\to D_s^-D_s^+$ is reported using a proton-proton collision dataset, corresponding to an integrated luminosity of 3 fb$^{-1}$, collected by the LHCb experiment. The measured value of the $\\bar{B}_s^0\\to D_s^-D_s^+$ effective lifetime is $1.379\\pm0.026\\pm0.017$ ps, where the uncertainties are statistical and systematic, respectively. This lifetime translates into a measurement of the decay width of the light $\\bar{B}_s^0$ mass eigenstate of $\\Gamma_L = 0.725 \\pm 0.014 \\pm 0.009$ ps$^{-1}$. The $\\bar{B}_s^0$ lifetime is also measured using the flavor-specific $\\bar{B}_s^0\\to D^-D_s^+$ decay to be $1.52\\pm 0.15 \\pm 0.01~{\\rm ps}$.

First observation of the decays $\\bar{B}^0_{(s)}\\to D_s^+K^-\\pi^+\\pi^-$ and $\\bar{B}^0_s\\to D_{s1}(2536)^+\\pi^-$

CERN Document Server

INSPIRE-00258707; Abellan Beteta, C; Adametz, A; Adeva, B; Adinolfi, M; Adrover, C; Affolder, A; Ajaltouni, Z; Albrecht, J; Alessio, F; Alexander, M; Ali, S; Alkhazov, G; Alvarez Cartelle, P; Alves Jr, A A; Amato, S; Amhis, Y; Anderlini, L; Anderson, J; Appleby, R B; Aquines Gutierrez, O; Archilli, F; Artamonov, A; Artuso, M; Aslanides, E; Auriemma, G; Bachmann, S; Back, J J; Baesso, C; Baldini, W; Barlow, R J; Barschel, C; Barsuk, S; Barter, W; Bates, A; Bauer, Th; Bay, A; Beddow, J; Bediaga, I; Belogurov, S; Belous, K; Belyaev, I; Ben-Haim, E; Benayoun, M; Bencivenni, G; Benson, S; Benton, J; Berezhnoy, A; Bernet, R; Bettler, M -O; van Beuzekom, M; Bien, A; Bifani, S; Bird, T; Bizzeti, A; Bjørnstad, P M; Blake, T; Blanc, F; Blanks, C; Blouw, J; Blusk, S; Bobrov, A; Bocci, V; Bondar, A; Bondar, N; Bonivento, W; Borghi, S; Borgia, A; Bowcock, T J V; Bozzi, C; Brambach, T; van den Brand, J; Bressieux, J; Brett, D; Britsch, M; Britton, T; Brook, N H; Brown, H; Büchler-Germann, A; Burducea, I; Bursche, A; Buytaert, J; Cadeddu, S; Callot, O; Calvi, M; Calvo Gomez, M; Camboni, A; Campana, P; Carbone, A; Carboni, G; Cardinale, R; Cardini, A; Carranza-Mejia, H; Carson, L; Carvalho Akiba, K; Casse, G; Cattaneo, M; Cauet, Ch; Charles, M; Charpentier, Ph; Chen, P; Chiapolini, N; Chrzaszcz, M; Ciba, K; Cid Vidal, X; Ciezarek, G; Clarke, P E L; Clemencic, M; Cliff, H V; Closier, J; Coca, C; Coco, V; Cogan, J; Cogneras, E; Collins, P; Comerma-Montells, A; Contu, A; Cook, A; Coombes, M; Corti, G; Couturier, B; Cowan, G A; Craik, D; Cunliffe, S; Currie, R; D'Ambrosio, C; David, P; David, P N Y; De Bonis, I; De Bruyn, K; De Capua, S; De Cian, M; De Miranda, J M; De Paula, L; De Simone, P; Decamp, D; Deckenhoff, M; Degaudenzi, H; Del Buono, L; Deplano, C; Derkach, D; Deschamps, O; Dettori, F; Di Canto, A; Dickens, J; Dijkstra, H; Diniz Batista, P; Dogaru, M; Domingo Bonal, F; Donleavy, S; Dordei, F; Dosil Suárez, A; Dossett, D; Dovbnya, A; Dupertuis, F; Dzhelyadin, R; Dziurda, A; Dzyuba, A; Easo, S; Egede, U; Egorychev, V; Eidelman, S; van Eijk, D; Eisenhardt, S; Ekelhof, R; Eklund, L; El Rifai, I; Elsasser, Ch; Elsby, D; Falabella, A; Färber, C; Fardell, G; Farinelli, C; Farry, S; Fave, V; Fernandez Albor, V; Ferreira Rodrigues, F; Ferro-Luzzi, M; Filippov, S; Fitzpatrick, C; Fontana, M; Fontanelli, F; Forty, R; Francisco, O; Frank, M; Frei, C; Frosini, M; Furcas, S; Gallas Torreira, A; Galli, D; Gandelman, M; Gandini, P; Gao, Y; Garnier, J-C; Garofoli, J; Garosi, P; Garra Tico, J; Garrido, L; Gaspar, C; Gauld, R; Gersabeck, E; Gersabeck, M; Gershon, T; Ghez, Ph; Gibson, V; Gligorov, V V; Göbel, C; Golubkov, D; Golutvin, A; Gomes, A; Gordon, H; Grabalosa Gándara, M; Graciani Diaz, R; Granado Cardoso, L A; Graugés, E; Graziani, G; Grecu, A; Greening, E; Gregson, S; Grünberg, O; Gui, B; Gushchin, E; Guz, Yu; Gys, T; Hadjivasiliou, C; Haefeli, G; Haen, C; Haines, S C; Hall, S; Hampson, T; Hansmann-Menzemer, S; Harnew, N; Harnew, S T; Harrison, J; Harrison, P F; Hartmann, T; He, J; Heijne, V; Hennessy, K; Henrard, P; Hernando Morata, J A; van Herwijnen, E; Hicks, E; Hill, D; Hoballah, M; Hopchev, P; Hulsbergen, W; Hunt, P; Huse, T; Hussain, N; Hutchcroft, D; Hynds, D; Iakovenko, V; Ilten, P; Imong, J; Jacobsson, R; Jaeger, A; Jahjah Hussein, M; Jans, E; Jansen, F; Jaton, P; Jean-Marie, B; Jing, F; John, M; Johnson, D; Jones, C R; Jost, B; Kaballo, M; Kandybei, S; Karacson, M; Karbach, T M; Kenyon, I R; Kerzel, U; Ketel, T; Keune, A; Khanji, B; Kim, Y M; Kochebina, O; Komarov, V; Koopman, R F; Koppenburg, P; Korolev, M; Kozlinskiy, A; Kravchuk, L; Kreplin, K; Kreps, M; Krocker, G; Krokovny, P; Kruse, F; Kucharczyk, M; Kudryavtsev, V; Kvaratskheliya, T; La Thi, V N; Lacarrere, D; Lafferty, G; Lai, A; Lambert, D; Lambert, R W; Lanciotti, E; Lanfranchi, G; Langenbruch, C; Latham, T; Lazzeroni, C; Le Gac, R; van Leerdam, J; Lees, J -P; Lefèvre, R; Leflat, A; Lefrançois, J; Leroy, O; Lesiak, T; Li, Y; Li Gioi, L; Liles, M; Lindner, R; Linn, C; Liu, B; Liu, G; von Loeben, J; Lopes, J H; Lopez Asamar, E; Lopez-March, N; Lu, H; Luisier, J; Luo, H; Mac Raighne, A; Machefert, F; Machikhiliyan, I V; Maciuc, F; Maev, O; Magnin, J; Maino, M; Malde, S; Manca, G; Mancinelli, G; Mangiafave, N; Marconi, U; Märki, R; Marks, J; Martellotti, G; Martens, A; Martin, L; Martín Sánchez, A; Martinelli, M; Martinez Santos, D; Martins Tostes, D; Massafferri, A; Matev, R; Mathe, Z; Matteuzzi, C; Matveev, M; Maurice, E; Mazurov, A; McCarthy, J; McGregor, G; McNulty, R; Meissner, M; Merk, M; Merkel, J; Milanes, D A; Minard, M -N; Molina Rodriguez, J; Monteil, S; Moran, D; Morawski, P; Mountain, R; Mous, I; Muheim, F; Müller, K; Muresan, R; Muryn, B; Muster, B; Mylroie-Smith, J; Naik, P; Nakada, T; Nandakumar, R; Nasteva, I; Needham, M; Neufeld, N; Nguyen, A D; Nguyen, T D; Nguyen-Mau, C; Nicol, M; Niess, V; Nikitin, N; Nikodem, T; Nomerotski, A; Novoselov, A; Oblakowska-Mucha, A; Obraztsov, V; Oggero, S; Ogilvy, S; Okhrimenko, O; Oldeman, R; Orlandea, M; Otalora Goicochea, J M; Owen, P; Pal, B K; Palano, A; Palutan, M; Panman, J; Papanestis, A; Pappagallo, M; Parkes, C; Parkinson, C J; Passaleva, G; Patel, G D; Patel, M; Patrick, G N; Patrignani, C; Pavel-Nicorescu, C; Pazos Alvarez, A; Pellegrino, A; Penso, G; Pepe Altarelli, M; Perazzini, S; Perego, D L; Perez Trigo, E; Pérez-Calero Yzquierdo, A; Perret, P; Perrin-Terrin, M; Pessina, G; Petridis, K; Petrolini, A; Phan, A; Picatoste Olloqui, E; Pie Valls, B; Pietrzyk, B; Pilař, T; Pinci, D; Playfer, S; Plo Casasus, M; Polci, F; Polok, G; Poluektov, A; Polycarpo, E; Popov, D; Popovici, B; Potterat, C; Powell, A; Prisciandaro, J; Pugatch, V; Puig Navarro, A; Qian, W; Rademacker, J H; Rakotomiaramanana, B; Rangel, M S; Raniuk, I; Rauschmayr, N; Raven, G; Redford, S; Reid, M M; dos Reis, A C; Ricciardi, S; Richards, A; Rinnert, K; Rives Molina, V; Roa Romero, D A; Robbe, P; Rodrigues, E; Rodriguez Perez, P; Rogers, G J; Roiser, S; Romanovsky, V; Romero Vidal, A; Rouvinet, J; Ruf, T; Ruiz, H; Sabatino, G; Saborido Silva, J J; Sagidova, N; Sail, P; Saitta, B; Salzmann, C; Sanmartin Sedes, B; Sannino, M; Santacesaria, R; Santamarina Rios, C; Santinelli, R; Santovetti, E; Sapunov, M; Sarti, A; Satriano, C; Satta, A; Savrie, M; Schaack, P; Schiller, M; Schindler, H; Schleich, S; Schlupp, M; Schmelling, M; Schmidt, B; Schneider, O; Schopper, A; Schune, M -H; Schwemmer, R; Sciascia, B; Sciubba, A; Seco, M; Semennikov, A; Senderowska, K; Sepp, I; Serra, N; Serrano, J; Seyfert, P; Shapkin, M; Shapoval, I; Shatalov, P; Shcheglov, Y; Shears, T; Shekhtman, L; Shevchenko, O; Shevchenko, V; Shires, A; Silva Coutinho, R; Skwarnicki, T; Smith, N A; Smith, E; Smith, M; Sobczak, K; Soler, F J P; Soomro, F; Souza, D; Souza De Paula, B; Spaan, B; Sparkes, A; Spradlin, P; Stagni, F; Stahl, S; Steinkamp, O; Stoica, S; Stone, S; Storaci, B; Straticiuc, M; Straumann, U; Subbiah, V K; Swientek, S; Szczekowski, M; Szczypka, P; Szumlak, T; T'Jampens, S; Teklishyn, M; Teodorescu, E; Teubert, F; Thomas, C; Thomas, E; van Tilburg, J; Tisserand, V; Tobin, M; Tolk, S; Tonelli, D; Topp-Joergensen, S; Torr, N; Tournefier, E; Tourneur, S; Tran, M T; Tsaregorodtsev, A; Tsopelas, P; Tuning, N; Ubeda Garcia, M; Ukleja, A; Urner, D; Uwer, U; Vagnoni, V; Valenti, G; Vazquez Gomez, R; Vazquez Regueiro, P; Vecchi, S; Velthuis, J J; Veltri, M; Veneziano, G; Vesterinen, M; Viaud, B; Videau, I; Vieira, D; Vilasis-Cardona, X; Visniakov, J; Vollhardt, A; Volyanskyy, D; Voong, D; Vorobyev, A; Vorobyev, V; Voß, C; Voss, H; Waldi, R; Wallace, R; Wandernoth, S; Wang, J; Ward, D R; Watson, N K; Webber, A D; Websdale, D; Whitehead, M; Wicht, J; Wiedner, D; Wiggers, L; Wilkinson, G; Williams, M P; Williams, M; Wilson, F F; Wishahi, J; Witek, M; Witzeling, W; Wotton, S A; Wright, S; Wu, S; Wyllie, K; Xie, Y; Xing, F; Xing, Z; Yang, Z; Young, R; Yuan, X; Yushchenko, O; Zangoli, M; Zavertyaev, M; Zhang, F; Zhang, L; Zhang, W C; Zhang, Y; Zhelezov, A; Zhong, L; Zvyagin, A

2012-01-01

The first observation of the decays $\\bar{B}^0_{s}\\to D_s^+K^-\\pi^+\\pi^-$ and $\\bar{B}^0\\to D_s^+K^-\\pi^+\\pi^-$ are reported using an integrated luminosity of 1.0 fb$^{-1}$ recorded by the LHCb experiment. The branching fractions, normalized with respect to $\\bar{B}^0_{s}\\to D_s^+\\pi^-\\pi^+\\pi^-$ and $\\bar{B}^0_{s}\\to D_s^+K^-\\pi^+\\pi^-$, respectively, are measured to be $\\frac{B(\\bar{B}^0_{s}\\to D_s^+K^-\\pi^+\\pi^-)}{B(\\bar{B}^0_{s}\\to D_s^+\\pi^-\\pi^+\\pi^-)} = (5.2\\pm0.5\\pm0.3)\\times10^{-2}$, $\\frac{B(\\bar{B}^0\\to D_s^+K^-\\pi^+\\pi^-)}{B(\\bar{B}^0_{s}\\to D_s^+K^-\\pi^+\\pi^-)} = 0.54\\pm0.07\\pm0.07$, where the first uncertainty is statistical and the second is systematic. The $\\bar{B}^0_{s}\\to D_s^+K^-\\pi^+\\pi^-$ decay is of particular interest as it can be used to measure the weak phase $\\gamma$. First observation of the $\\bar{B}^0_s\\to D_{s1}(2536)^+\\pi^-$, $D_{s1}^+\\to D_s^+\\pi^-\\pi^+$ decay is also presented, and its branching fraction relative to $\\bar{B}^0_{s}\\to D_s^+\\pi^-\\pi^+\\pi^-$ is found to be $\\frac{...

A young person's game: immersion and distancing in bar work.

Science.gov (United States)

Conway, Thomas; MacNeela, Pádraig

2012-01-01

Previous research indicates that bar workers report high levels of alcohol consumption, but the bar work experience itself has been little studied as a means to understand health threats associated with this job role. The subjective experience and meaning of bar work was explored in this study by interviewing current and ex-bar workers from a district in an Irish city that had a high density of bars and busy tourism industry. A total of 12 participants took part in focus groups (FGs) and seven in individual interviews. Four themes were identified in a thematic analysis. The central depiction of bar work was of an initial immersion in an intensive lifestyle characterised by heavy drinking, with subsequent distancing from the extremes of the lifestyle. The participants affiliated strongly with the bar work occupational identity, which included alcohol use in group scenarios for drinking during work, after work and on time off. The bar work lifestyle was most intense in the 'superpub' environment, characterised by permissive staff drinking norms and reported stress. Although an important identity, bar work was ultimately a transient role. The findings are considered in relation to research on occupation-specific stress and alcohol use, social identity and developmental needs in young adulthood.

KLM's Boric Acid Reclamation System (BARS): An update

International Nuclear Information System (INIS)

Schuelke, D.; Kniazewycz, B.G.; Markind, J.; Brossart, M.A.; Choi, R.C.

1987-02-01

KLM Technologies has implemented its Department of Energy Phase II Small Business Innovative Research (SBIR) demonstration program for a radioactive waste Boric Acid Reclamation System (BARS). Preliminary performance indicates enhanced treatment by the BARS technique over state of the art process methods for selective removal of silica and other impurities from borated water matrices. At optimal system recovery of 96 to 97%, BARS removes nominal levels of boric acid while achieving significant rejection for soluble silica and selective radioisotopes. This is indicative of superior performance compared to existing data governing standard boric acid process treatment in the presence of silica and other contaminants. Conventional technologies have also proven to be relatively expensive, utilizing costly chemically treated disposable resins for primary waste removal. The overall BARS program indicates substantial savings regarding off-site disposal costs based on reduced waste generation. Optimization of the BARS technology could have potential impact on conventional process technologies that are essentially non-selective in removal capacities. 2 figs

$L^2$ estimates for the $\\bar \\partial$ operator

OpenAIRE

McNeal, Jeffery D.; Varolin, Dror

2015-01-01

This is a survey article about $L^2$ estimates for the $\\bar \\partial$ operator. After a review of the basic approach that has come to be called the "Bochner-Kodaira Technique", the focus is on twisted techniques and their applications to estimates for $\\bar \\partial$, to $L^2$ extension theorems, and to other problems in complex analysis and geometry, including invariant metric estimates and the $\\bar \\partial$-Neumann Problem.

Bar represses dPax2 and decapentaplegic to regulate cell fate and morphogenetic cell death in Drosophila eye.

Directory of Open Access Journals (Sweden)

Jongkyun Kang

Full Text Available The coordinated regulation of cell fate and cell survival is crucial for normal pattern formation in developing organisms. In Drosophila compound eye development, crystalline arrays of hexagonal ommatidia are established by precise assembly of diverse cell types, including the photoreceptor cells, cone cells and interommatidial (IOM pigment cells. The molecular basis for controlling the number of cone and IOM pigment cells during ommatidial pattern formation is not well understood. Here we present evidence that BarH1 and BarH2 homeobox genes are essential for eye patterning by inhibiting excess cone cell differentiation and promoting programmed death of IOM cells. Specifically, we show that loss of Bar from the undifferentiated retinal precursor cells leads to ectopic expression of Prospero and dPax2, two transcription factors essential for cone cell specification, resulting in excess cone cell differentiation. We also show that loss of Bar causes ectopic expression of the TGFβ homolog Decapentaplegic (Dpp posterior to the morphogenetic furrow in the larval eye imaginal disc. The ectopic Dpp expression is not responsible for the formation of excess cone cells in Bar loss-of-function mutant eyes. Instead, it causes reduction in IOM cell death in the pupal stage by antagonizing the function of pro-apoptotic gene reaper. Taken together, this study suggests a novel regulatory mechanism in the control of developmental cell death in which the repression of Dpp by Bar in larval eye disc is essential for IOM cell death in pupal retina.

Machine learning techniques in searches for t t-bar h in the h  →  b b-bar decay channel

International Nuclear Information System (INIS)

Santos, R.; Nguyen, M.; Zhou, J.; Webster, J.; Ryu, S.; Chekanov, S.; Adelman, J.

2017-01-01

Study of the production of pairs of top quarks in association with a Higgs boson is one of the primary goals of the Large Hadron Collider over the next decade, as measurements of this process may help us to understand whether the uniquely large mass of the top quark plays a special role in electroweak symmetry breaking. Higgs bosons decay predominantly to b b-bar , yielding signatures for the signal that are similar to t t-bar  + jets with heavy flavor. Though particularly challenging to study due to the similar kinematics between signal and background events, such final states ( t t-bar   b b-bar ) are an important channel for studying the top quark Yukawa coupling. This paper presents a systematic study of machine learning (ML) methods for detecting t t-bar h in the h  →  b b-bar decay channel. Among the eight ML methods tested, we show that two models, extreme gradient boosted trees and neural network models, outperform alternative methods. We further study the effectiveness of ML algorithms by investigating the impact of feature set and data size, as well as the structure of the models. While extended feature set and larger training sets expectedly lead to improvement of performance, shallow models deliver comparable or better performance than their deeper counterparts. Our study suggests that ensembles of trees and neurons, not necessarily deep, work effectively for the problem of t t-bar h detection.

$\\Lambda$ and $\\bar{\\Lambda}$ polarization at COMPASS

CERN Document Server

Kang, Donghee

2010-01-01

At the COMPASS experiment $\\Lambda$ and $\\bar{\\Lambda}$ particles are produced with high statistics in deep inelastic scattering (DIS) processes of 160 GeV/c polarized muons. Since both, beam and target, are polarized, various studies on the $\\Lambda$ polarization are possible. We present results on the longitudinal polarization transfer from muons to $\\Lambda$ hyperons produced by scattering off an unpolarized isoscalar target and preliminary results on the transverse $\\Lambda$ polarization with a transversely polarized proton target. The $\\Lambda$ and $\\bar{\\Lambda}$ polarization can be studied by measuring the acceptance corrected angular distribution of its decay products. The longitudinal spin transfers to $\\Lambda$ and $\\bar{\\Lambda}$ produced in the current fragmentation region exhibit different behaviours as a function of $x_{Bj}$ and $x_{F}$. The $x_{Bj}$ and $x_{F}$ dependences of $\\Lambda$ polarization are compatible with zero, while $\\bar{\\Lambda}$ polarization tends to increase with $x_{F}$. Info...

Detection of Bar Transgenic Sugarcane with a Rapid and Visual Loop-Mediated Isothermal Amplification Assay.

Science.gov (United States)

Zhou, Dinggang; Wang, Chunfeng; Li, Zhu; Chen, Yun; Gao, Shiwu; Guo, Jinlong; Lu, Wenying; Su, Yachun; Xu, Liping; Que, Youxiong

2016-01-01

Genetic engineering offers an attractive alternative in sugarcane breeding for increasing cane and sugar yields as well as disease and insect resistance. Bar transgenic sugarcane employing the herbicide tolerance is a useful agronomical trait in weed control. In this study, a loop-mediated isothermal amplification (LAMP) assay for rapid detection of the bar gene in transgenic sugarcane has been developed and evaluated. A set of six primers was designed for LAMP-based amplification of the bar gene. The LAMP reaction conditions were optimized as follows: 5.25 mM of Mg(2+), 6:1 ratio of inner vs. outer primer, and 6.0 U of Bst DNA polymerase in a reaction volume of 25.0 μL. The detection limit of the recombinant plasmid 1Ac0229 was as low as 10 copies in the developed LAMP, which was 10-fold higher sensitive than that of conventional PCR. In 100 putative transgenic lines, the bar gene was detected in 100/100 cases (100%) by LAMP and 97/100 cases (97%) by conventional PCR, respectively. In conclusion, the developed LAMP assay is visual, rapid, sensitive, reliable, and cost-effective for detection of the bar specific transgenic sugarcane.

Detection of bar transgenic sugarcane with a rapid and visual loop-mediated isothermal amplification assay

Directory of Open Access Journals (Sweden)

Dinggang eZhou

2016-03-01

Full Text Available Genetic engineering offers an attractive alternative in sugarcane breeding for increasing cane and sugar yields as well as disease and insect resistance. Bar transgenic sugarcane employing the herbicide tolerance is a useful agronomical trait in weed control. In this study, a loop-mediated isothermal amplification (LAMP assay for rapid detection of the bar gene in transgenic sugarcane has been developed and evaluated. A set of six primers was designed for LAMP-based amplification of the bar gene. The LAMP reaction conditions were optimized as follows: 5.25 mM of Mg2+, 6:1 ratio of inner vs outer primer, and 6.0 U of Bst DNA polymerase in a reaction volume of 25.0 μL. The detection limit of the recombinant plasmid 1Ac0229 was as low as 10 copies in the developed LAMP, which was ten-fold higher sensitive than that of conventional PCR. In 100 putative transgenic lines, the bar gene was detected in 100/100 cases (100% by LAMP and 97/100 cases (97% by conventional PCR, respectively. In conclusion, the developed LAMP assay is visual, rapid, sensitive, reliable and cost-effective for detection of the bar specific transgenic sugarcane.

Analisis Derau dalam Perancangan Rangkaian Terintegrasi Op-Amp

Directory of Open Access Journals (Sweden)

Siti Sendari

2009-02-01

Full Text Available Perancangan IC Op-Amp, memerlukan spesifikasi-spesifikasi yang meliputi parameter proses dan parameter perancangan. Dalam menentukan parameter perancangan, derau merupakan suatu hal yang tidak bisa ditinggalkan, karena derau dapat menentukan keandalan perancangan. Untuk menganalisis derau pada IC Op-Amp langkah pertama yang harus diketahui adalah sumber-sumber derau, setelah itu dilakukan analisis derau baik secara teoritis maupun secara simulasi untuk mengetahui derau yang mungkin terjadi dalam perancangan IC, apakah sudah sesuai dengan spesifikasi yang ditentukan atau tidak. Untuk simulasi derau dapat dilakukan dengan program Spice.

Towards understanding the dynamics of the bar/bulge region in our Galaxy

Directory of Open Access Journals (Sweden)

Athanassoula E.

2012-02-01

Full Text Available I review some of the work on bars which is closely linked to the bar/bulge system in our Galaxy. Several independent studies, using totally independent methods, come to the same results about the 3D structure of a bar, i.e., that a bar is composed of a vertically thick inner part and a vertically thin outer part. I give examples of this from simulations and substantiate the discussion with input from orbital structure analysis and from observations. The thick part has a considerably shorter radial extent than the thin part. I then see how this applies to our Galaxy, where two bars have been reported, the COBE/DIRBE bar and the Long bar. Comparing their extents and making the reasonable and necessary assumption that our Galaxy has properties similar to those of other galaxies of similar type, leads to the conclusion that these two bars can not form a standard double bar system. I then discuss arguments in favour of the two bars being simply different parts of the same bar, the COBE/DIRBE bar being the thick inner part and the Long bar being the thin outer part of this bar. I also very briefly discuss some related new results. I first consider bar formation and evolution in disc galaxies with a gaseous component – including star formation, feedback and evolution – and a triaxial halo. Then I consider bar formation in a fully cosmological context using hydrodynamical LCDM simulations, where the host galaxies grow, accrete matter and significantly evolve during the formation and evolution of the bar.

Dynamics of membrane nanotubes coated with I-BAR

Science.gov (United States)

Barooji, Younes F.; Rørvig-Lund, Andreas; Semsey, Szabolcs; Reihani, S. Nader S.; Bendix, Poul M.

2016-07-01

Membrane deformation is a necessary step in a number of cellular processes such as filopodia and invadopodia formation and has been shown to involve membrane shaping proteins containing membrane binding domains from the IRSp53-MIM protein family. In reconstituted membranes the membrane shaping domains can efficiently deform negatively charged membranes into tubules without any other proteins present. Here, we show that the IM domain (also called I-BAR domain) from the protein ABBA, forms semi-flexible nanotubes protruding into Giant Unilamellar lipid Vesicles (GUVs). By simultaneous quantification of tube intensity and tubular shape we find both the diameter and stiffness of the nanotubes. I-BAR decorated tubes were quantified to have a diameter of ~50 nm and exhibit no stiffening relative to protein free tubes of the same diameter. At high protein density the tubes are immobile whereas at lower density the tubes diffuse freely on the surface of the GUV. Bleaching experiments of the fluorescently tagged I-BAR confirmed that the mobility of the tubes correlates with the mobility of the I-BAR on the GUV membrane. Finally, at low density of I-BAR the protein upconcentrates within tubes protruding into the GUVs. This implies that I-BAR exhibits strong preference for negatively curved membranes.

A study on plate anchor detailing systems of shear re-bar

International Nuclear Information System (INIS)

Tsurumaki, S.; Ujiie, K.; Nishikawa, T.; Kitayama, K.

1995-01-01

For shell walls and base slabs in reactor buildings, besides a large amount of main bars, numerous shear re-bars have been employed to resist to out-of-plane force. As a result , detailing work involving shear re-bar is extremely involved. For example, the employed re-bar anchor method differs from the ordinary methods in which, a end of shear re-bar with 135-degrees hook or with anchor plate type and another re-bar end with 90-degrees hook are used. However the structural characteristics in members using shear re-bar of the bolt-mounted anchor plate have not yet been examined. A test was performed to confirm the effects of anchor methods for shear re-bars on shearing behavior of members. This paper describes the test plan, method and results. (author). 12 figs., 7 tabs

Numerical modeling of the autumnal thermal bar

Science.gov (United States)

Tsydenov, Bair O.

2018-03-01

The autumnal riverine thermal bar of Kamloops Lake has been simulated using atmospheric data from December 1, 2015, to January 4, 2016. The nonhydrostatic 2.5D mathematical model developed takes into account the diurnal variability of the heat fluxes and wind on the lake surface. The average values for shortwave and longwave radiation and latent and sensible heat fluxes were 19.7 W/m2, - 95.9 W/m2, - 11.8 W/m2, and - 32.0 W/m2 respectively. Analysis of the wind regime data showed prevailing easterly winds and maximum speed of 11 m/s on the 8th and 19th days. Numerical experiments with different boundary conditions at the lake surface were conducted to evaluate effects of variable heat flux and wind stress. The results of modeling demonstrated that the variable heat flux affects the process of thermal bar evolution, especially during the lengthy night cooling. However, the wind had the greatest impact on the behavior of the autumnal thermal bar: The easterly winds contributed to an earlier appearance of the thermal bar, but the strong winds generating the intensive circulations (the velocity of the upper lake flow increased to 6 cm/s) may destroy the thermal bar front.

Cooling of rectangular bars

International Nuclear Information System (INIS)

Frainer, V.J.

1979-01-01

A solution of the time-transient Heat Transfer Differential Equation in rectangular coordinates is presented, leading to a model which describes the temperature drop with time in rectangular bars. It is similar to an other model for cilindrical bars which has been previously developed in the Laboratory of Mechanical Metallurgy of UFRGS. Following these models, a generalization has been made, which permits cooling time evaluation for all profiles. These results are compared with experimental laboratory data in the 1200 to 800 0 C range. Some other existing models were also studied which have the purpose of studing the same phenomenon. Their mathematical forms and their evaluated values are analyzed and compared with experimental ones. (Author) [pt

Identifiksi Sebaran Litologi berdasarkan Analisis Data Resistivitas di Gunung Wungkal

OpenAIRE

Nurul Dzakiya; MGS. Dwiki Nugraha; Nenden L. Sidik; Trias Galena

2017-01-01

Analisis data untuk mengidentifikasi sebaran litologi yang memiliki potensi bahan galian industri di Daerah Gunung Wungkal Yogyakarta dengan menggunakan metode resistivitas dan survei geologi permukaan telah dilakukan. Hasil korelasi kedua data tersebut menunjukkan sebaran litologi merupakan pelapukan intrusi batuan beku yang kemudian menghasilkan material lempung (6,0-10 m), lempung pasiran (11-30 m) dan lapukan batuan diorit (30-55 m) yang berada di kedalaman berbeda. Ketebalan batuan di pe...

Analisis Pemasaran Ayam Ras Pedaging di Pasar Tradisional Kota Medan

OpenAIRE

Fachri, Yusrizal

2017-01-01

130306044 YUSRIZAL FACHRI, 2017. “Analisis Pemasaran Ayam Ras Pedaging di Pasar Tradisional Kota Medan”. Dibimbing oleh ARMYN HAKIM DAULAY dan NEVY DIANA HANAFI. Penelitian ini bertujuan untuk mengidentifikasi karakteristik lembaga pemasaran, bentuk saluran, fungsi pemasaran, dan menganalisis nilai tambah di lembaga-lembaga pemasaran ayam ras pedaging di pasar tradisional Kota Medan pada April sampai Mei 2017. Penelitian ini menggunakan data primer yang didapatkan dari observasi dan waw...

PATTERN SPEEDS OF BARS AND SPIRAL ARMS FROM Hα VELOCITY FIELDS

International Nuclear Information System (INIS)

Fathi, K.; Pinol-Ferrer, N.; Beckman, J. E.; MartInez-Valpuesta, I.; Hernandez, O.; Carignan, C.

2009-01-01

We have applied the Tremaine-Weinberg method to 10 late-type barred spiral galaxies using data cubes, in Hα emission, from the FaNTOmM and GHAFAS Fabry-Perot spectrometers. We have combined the derived bar (and/or spiral) pattern speeds with angular frequency plots to measure the corotation radii for the bars in these galaxies. We base our results on a combination of this method with a morphological analysis designed to estimate the corotation radius to bar-length ratio using two independent techniques on archival near-infrared images, and although we are aware of the limitation of the application of the Tremaine-Weinberg method using Hα observations, we find consistently excellent agreement between bar and spiral arm parameters derived using different methods. In general, the corotation radius, measured using the Tremaine-Weinberg method, is closely related to the bar length, measured independently from photometry and consistent with previous studies. Our corotation/bar-length ratios and pattern speed values are in good agreement with general results from numerical simulations of bars. In systems with identified secondary bars, we measure higher Hα velocity dispersion in the circumnuclear regions, whereas in all the other galaxies, we detect flat velocity dispersion profiles. In the galaxies where the bar is almost purely stellar, Hα measurements are missing, and the Tremaine-Weinberg method yields the pattern speeds of the spiral arms. The excellent agreement between the Tremaine-Weinberg method results and the morphological analysis and bar parameters in numerical simulations suggests that although the Hα emitting gas does not obey the continuity equation, it can be used to derive the bar pattern speed. In addition, we have analyzed the Hα velocity dispersion maps to investigate signatures of secular evolution of the bars in these galaxies. The increased central velocity dispersion in the galaxies with secondary bars suggests that the formation of inner

Analisis Kekuatan Struktur Pallet Menggunakan Metode Elemen Hingga

Directory of Open Access Journals (Sweden)

Tria Mariz Arief

2015-07-01

Full Text Available Pallet sebagai suatu alat bantu untuk mempermudah proses bongkar-muat logistik. Palletdigunakan hampir dalam berbagai lingkungan transportasi logistik. Pada bahasan berikutdikhususkan dalam lingkup transportasi di dalam pesawat udara khususnya pada pesawatangkut militer. Di lingkungan militer pallet digunakan untuk transport logistik baik secara normalmuat (loading dan bongkar (unloading maupun kondisi bongkar dengan diterjunkan daripesawat udara. Untuk pemenuhan penggunaan tersebut dilakukan perancangan ulang (reverseengineering struktur pallet yang dapat dimanufaktur secara lokal. Hipotesis awal menunjukkanbahwa berdasarkan kondisi pembebanan pada pallet dapat diperkirakan bahwa kondisitegangan dan regangan maksimum akan terjadi pada posisi sudut struktur pallet yang ditransferbebannya ke komponen plat besi penahan siku-siku dan baut. Material yang digunakan padastruktur pallet adalah Allumunium Alloy 7075-T6 dengan kekuatan tarik sebesar 503 MPa.Analisis dilakukan dengan menggunakan simulasi numerik dengan metoda elemen hingga(FEM. Proses simulasi numerik kekuatan struktur pallet difokuskan pada pembebanan statis(termasuk pengaruh factor G dalam interval beban statis 4 ton sampai 7 ton. Analisis dilakukanpada perubahan variabel tegangan dan regangan terhadap variasi beban yang diberikan untukmendapatkan tingkat keamanan struktur (margin safety. Pemodelan dilakukan denganidealisasi model ¼ bagian menggunakan elemen terstruktur dengan jenis elemen hexahedral(brick dengan jumlah 73803 elemen dan 360323 node. Hasil analisis menunjukkan teganganekuivalen maksimum struktur Pallet adalah 94 MPa yang terjadi di penguat sudut (anglebracket. Sedangkan pada struktur penguat lapis (sandwich structure berbahan thick blockyang mempunyai kekuatan sebesar 20 MPa adalah sebesar 0.84 MPa. Tingkat keamanansecara keseluruhan struktur dengan mempertimbangkan factor G hingga 2 adalah 5.3.Kata kunci: Analisis struktur, pallet, logistik, reverse engineering, FEM

Structural design guidelines for concrete bridge decks reinforced with corrosion-resistant reinforcing bars.

Science.gov (United States)

2014-10-01

This research program develops and validates structural design guidelines and details for concrete bridge decks with : corrosion-resistant reinforcing (CRR) bars. A two-phase experimental program was conducted where a control test set consistent : wi...

Analisis Tata Kelola Teknologi Informasi Menggunakan Kerangka Kerja COBIT 4.1 pada Fakultas Teknik Undip

Directory of Open Access Journals (Sweden)

Arini Arumana

2014-06-01

Full Text Available Peran teknologi informasi dalam suatu instansi sudah tidak dapat dielakkan lagi, mengingat perkembangannya yang begitu pesat seiring berjalannya waktu. Namun masalah yang sering terjadi di instansi adalah penggunaan teknologi informasi yang kadang tidak sesuai dengan harapan. Oleh karena itu diperlukan tata kelola terhadap penggunaan teknologi informasi yang biasa disebut dengan IT Governance. Fakultas teknik UNDIP adalah salah satu fakultas yang dalam operasionalnya sangat mengandalkan teknologi informasi, baik dalam aktifitas belajar mengajar maupun dalam menjalankan operasional bisnis. Kondisi sekarang di Fakultas Teknik sendiri tidak terdapat suatu indikator yang dapat menyatakan bahwa kinerja TI yang berjalan telah sesuai dengan visi dan misi Fakultas Teknik, oleh karena itu perlu dilakukan analisis tata kelola teknologi informasi, guna mengetahui performa TI sekarang sesuai dengan yang diharapkan oleh managemen atau tidak. Hasil dari analisis ini berupa tingkat kematangan tata kelola TI yang mecerminkan kondisi tata kelola TI di Fakultas Teknik dengan mengacu pada maturity level yang disediakan kerangka kerja COBIT 4.1, yakni dari level 0 (non-existent sampai 5 (optimized. Berdasarkan analisis yang dilakukan, secara garis besar kondisi kematangan tata kelola TI Fakultas Teknik berada pada level 2 yakni repeatable but intuitive. Kondisi ini mengacu pada beberapa kelemahan dalam proses-proses TI yang berjalan, diantaranya penetapan dan dokumentasi tindakan, kebijakan dan prosedur yang minim, serta tidak tersedianya service level yang disetujui bersama.

An investigation of the tri-bar gripping system on isometric muscular endurance.

Science.gov (United States)

Drury, Daniel G; Faggiono, Heath; Stuempfle, Kristin J

2004-11-01

Recently, a new product called the Tri-Bar has been introduced as an alternative to the standard round weightlifting bar. The Tri-Bar has the same weight, length, and circumference as a standard weightlifting bar and differs only in that the shape of the bar is formed like a triangle with rounded edges. Theoretically, the shape of the bar will enhance gripping comfort and increase muscular endurance. We studied 32 moderately trained males who were free from upper-body injury or limitation. Each participant completed 4 visits to the lab as part of 2 separate investigations. The first investigation was a comparison of straight-arm hang times while grasping a standard Olympic bar or a Tri-Bar attached to the top of a power rack. The second investigation involved grasping a standard revolving cable handle or a Tri-Bar revolving handle attached to a weight equal to half the subject's body weight. In both investigations, time was used as a measure of isometric muscular endurance. Differences were determined using a dependent t-test, and a level of significance was set at p < 0.05. Mean hang times were significantly longer when the men hung from the Tri-Bar (107.6 seconds) versus the standard bar (95.4 seconds) (p = 0.015). Conversely, in the investigation using the revolving handles, the round bar produced longer grasping times (71.5 seconds) than the Tri-Bar (62.6 seconds) (p = 0.000). The results of this investigation indicate that a fixed and stable Tri-Bar may help to increase hang time, but a Tri-Bar free to rotate within the grasp may decrease grasping time in comparison to a standard round handle. With regard to exercises that require isometric grasping, the Tri-Bar may be an effective alternative to the standard bar for increasing isometric grasping endurance.

ANALISIS KEBUTUHAN UNTUK PENGEMBANGAN MODUL INKUIRI BERBASIS PERTANYAAN (MIBP DI SMP

Directory of Open Access Journals (Sweden)

Desak Made Citrawathi

2016-08-01

Full Text Available melakukan analisis kebutuhan untuk pengembangan dan penyusunan modul inkuri berbasis pertanyaan (MIBP. MIBP disusun untuk memfasilitasi pembelajaran sains agar dapat meningkatkan penguasaan konsep biologi, keterampilan proses sains, dan kemampuan berpikir siswa SMP. Pengembangan MIBP menggunakan model ADDIE. Prosedur pengembangan terdiri dari 5 tahap, yaitu 1 Menganalisis, 2 Mendisain, 3 Mengembangkan dan produksi, 4 Mengimplementasikan, dan 5 Mengevaluasi. Penelitian dilakukan dalam waktu 3 tahun. Pada tahun pertama ini dilakukan analisis kebutuhan dan mendisain MIBP. Subjek penelitian adalah guru IPA SMP Negeri dan Swasta di Kecamatan Buleleng. Pengumpulan data dilakukan dengan wawancara, penyebaran angket, observasi, dan dokumentasi. Analisis data dilakukan secara deskriptif dan interpretatif. Dari hasil analisis diperoleh bahwa kurikulum yang digunakan di SMPN 1,SMPN 2, dan SMPN 4 adalah kurikulum 2013, sedangkan di SMP lainnya masih menggunakan kurikulum 2006. Kemampuan guru bertanya untuk meningkatkan keterampilan proses sains, penguasaan konsep, dan kemampuan berpikir belum optimal. Hal ini ditunjukkan dari jenis pertanyaan yang diajukan guru 85,8 persen bersifat konvergen, dan 14,2 persen bersifat divergen. Berdasarkan pertanyaan menurut Taksonomi Bloom, pertanyaan yang diajukan guru 74,4 persen pertanyaan ingatan, 22,6 persen pemahaman, 2,68 persen aplikasi, dan 0,32 persen analisis. Salah satu yang dapat dilakukan untuk meningkatkan kemampuan guru adalah memfasilitasi pembelajarannya dengan MIBP. Dari karakteristik perkembangan kognitifnya, siswa SMP dapat dibelajarkan dengan strategi inkuiri, dan guru setuju dengan pengembangan MIBP. Kata kunci: Kemampuan berpikir, keterampilan proses sains, Modul Inkuiri Berbasis Pertanyaan, penguasaan konsep Pertanyaan, penguasaan konsep Abstract The purpose of this study was to analyze the need for the development and preparation of question-based inquiry module (QBIM. QBIM was designed conceiv to

Broken-Rotor-Bar Diagnosis for Induction Motors

International Nuclear Information System (INIS)

Wang Jinjiang; Gao, Robert X; Yan Ruqiang

2011-01-01

Broken rotor bar is one of the commonly encountered induction motor faults that may cause serious motor damage to the motor if not detected timely. Past efforts on broken rotor bar diagnosis have been focused on current signature analysis using spectral analysis and wavelet transform. These methods require accurate slip estimation to localize fault-related frequency. This paper presents a new approach to broken rotor bar diagnosis without slip estimation, based on the ensemble empirical mode decomposition (EEMD) and the Hilbert transform. Specifically, the Hilbert transform first extracts the envelope of the motor current signal, which contains broken rotor fault-related frequency information. Subsequently, the envelope signal is adaptively decomposed into a number of intrinsic mode functions (IMFs) by the EEMD algorithm. Two criteria based on the energy and correlation analyses have been investigated to automate the IMF selection. Numerical and experimental studies have confirmed that the proposed approach is effective in diagnosing broken rotor bar faults for improved induction motor condition monitoring and damage assessment.

Quarkonium Spectroscopy And Search for New States at BaBar

Energy Technology Data Exchange (ETDEWEB)

Cibinetto, G.

2011-11-04

The BaBar experiment at the PEP-II B-factory gives excellent opportunities for the quarkonium spectroscopy. Investigation of the properties of new states like the X(3872), Y(3940) and Y(4260) are performed aiming to understand their nature. Recent BaBar results will be presented in this paper. At the B-factories charmonium and charmonium-like states are copiously produced via several mechanisms: in B decay (color suppressed b {yields} c transition), double charmonium production (e{sup +}e{sup -} {yields} c{bar c} + c{bar c}), two photons production ({gamma}*{gamma}* {yields} c{bar c}, where the c{bar c} state has positive C-parity) and in initial state radiation (ISR) when the e{sup {+-}} in its initial state emits a photon lowering the effective center of mass energy of the e{sup +}e{sup -} interaction (e{sup +}e{sup -} {yields} {gamma}{sub ISR} + c{bar c}, where the charmonium state has the quantum numbers J{sup PC} = 1{sup -2}). Many new states have been recently discovered at the B-factories, BaBar and Belle, above the D{bar D} threshold in the charmonium energy region. While some of them appear to be consistent with conventional c{sub c} states others do not fit with any expectation. Several interpretations for these states have been proposed: for some of them the mass values suggest that they could be conventional charmonia, but also other interpretations like D{sup 0}{bar D}*{sup 0} molecule or diquark-antidiquark states among many other models have been advanced. Reviews can be found in Refs. [1][2]. In all cases the picture is not completely clear. This situation could be remedied by a coherent search of the decay pattern to D{bar D}, search for production in two-photon fusion and ISR, and of course improving the statistical precision upon the current measurements. The BaBar experiment at the PEP-II asymmetric collider, designed to perform precision measurement of CP violation in the B meson system, has an extensive quarkonium spectroscopy program. Recent

BDTs in the Search for $\\mathrm{t \\bar{t} H}$ Production with Higgs Decays to $\\mathrm{b\\bar{b}}$ at ATLAS

CERN Document Server

Glaysher, Paul; The ATLAS collaboration

2017-01-01

An observation of Higgs boson production in association with a top quark pair ($\\mathrm{t \\bar{t} H}$) provides a direct measurement of the top quark Yukawa coupling and probes the Standard Model. The ATLAS search for $\\mathrm{t \\bar{t} H}$, $\\mathrm{H\\rightarrow b\\bar{b}}$ relies on Boosted Decision Trees for Higgs reconstruction and signal-background discrimination, which is presented for the preliminary results on the $\\sqrt{s}=$~13~TeV dataset.

DIRC - a particle identification system for BaBar

International Nuclear Information System (INIS)

Hoecker, A.

1999-10-01

The DIRC (an acronym for Detection of Internally Reflected Cherenkov light) is a novel type of Cherenkov imaging device that has been developed, built and installed as part of the BaBar detector at the asymmetric B-factory PEP-II at SLAC. The DIRC is based on total internal reflection of Cherenkov photons produced and guided within thin, rectangular quartz bars covering the barrel region of BaBar. The photon detector is an array of photomultiplier tubes covering the photon phase space at the backward end of the bars. In its first few months of operation the DIRC performance has been found to achieve the design requirements. This note presents results from cosmic ray data and an analysis of the first beam collision runs. (author)

Exclusive channels in bar pp annihilation at rest

International Nuclear Information System (INIS)

Bluem, P.

1992-01-01

Exclusive channels in bar pp annihilation at rest provide a powerful tool for studying the meson spectrum below the bar pp threshold. The mesons can be classified in SU(3) multiplets according to their quantum numbers. The states which do not fit into this classification are candidates for new forms of hadronic matter like glueballs, hybrids, and multi-quark states. Recent results on the search for exotic states in exclusive channels of bar pp annihilation at rest are discussed. No less important is the study of the annihilation mechanism. In particular, high-statistic measurements of bar pp annihilation at rest into two-meson final states are an excellent tool for studying quark dynamics. Examples of two-body reactions are presented. 24 refs., 9 figs., 3 tabs

Principles and Practices of Bar and Beverage Management

OpenAIRE

Murphy, James Peter

2013-01-01

Principles and Practices of Bar and Beverage Management is a comprehensive text and resource book designed to explain the latest developments and new complexities of managing modern bars - be they stand alone or part of larger institutions such as hotels and resorts. Consumer expectations have changed, and a bar today must deliver an integrated social experience in a safe modern environment, which also offers the latest products and services in a professional and engaging fashion. Against ...

700 bar hydrogen cylinder design, testing and certification

International Nuclear Information System (INIS)

Duncan, M.

2004-01-01

'Full text:' Light weight and high pressure cylinders for compressed hydrogen storage are essential components for fuel cell vehicles. Storage volume and mass are two key considerations. Current on-board hydrogen storage systems are based on a maximum pressure of 350 bar. While 350 bar systems are excellent solutions for many applications, some situations required higher storage densities due to space restrictions. As a result significant research and development work has been expended by cylinder manufacturers, systems providers, testing agencies and automotive manufacturers to develop 700 bar systems to reduce storage volume. Dynetek Industries Ltd has proactively developed a range of 700 bar storage cylinders based on a seamless aluminum liner over wrapped with a carbon fiber composite. This paper presents the challenges and processes involved in the design, testing and certification of the Dynetek Industries Ltd 700 bar cylinder. The paper also provides reasoning for further volume and mass optimization of compressed hydrogen cylinders by incorporating realistic cylinder usage parameters into standards. In particular the overly conservative fill life requirement for cylinders will be examined. (author)

Modified sine bar device measures small angles with high accuracy

Science.gov (United States)

Thekaekara, M.

1968-01-01

Modified sine bar device measures small angles with enough accuracy to calibrate precision optical autocollimators. The sine bar is a massive bar of steel supported by two cylindrical rods at one end and one at the other.

KLM's boric acid reclamation system (BARS). An update

International Nuclear Information System (INIS)

Schuelke, D.; Kniazewycz, B.G.; Markind, J.; Brossart, M.A.; Choi, R.C.

1987-01-01

KLM Technologies has implemented its Department of Energy Phase II Small Business Innovative Research (SBIR) demonstration program for a radioactive waste Boric Acid Reclamation System (BARS). Preliminary performance indicates enhanced treatment by the BARS technique over state of the art process methods for selective removal of silica and other impurities from borated water matrices. At optimal system recovery of 96-97 percent. BARS removes nominal levels of boric acid while achieving significant rejection for soluble silica and selective radioisotopes. This is indicative of superior performance compared to existing data governing standard boric acid process treatment in the presence of silica and other contaminants. Conventional technologies have also proven to be relatively expensive, utilizing costly chemically treated disposable resins for primary waste removal. The overall BARS program indicates substantial savings regarding off-site disposal costs based on reduced waste generation. Optimization of the BARS technology could have potential impact on conventional process technologies that are essentially non-selective in removal capacities. Within the scope of the project, a variety of contaminated process stream and mixed radwaste sources have been evaluated at Northern States Power's Prairie Island Nuclear Generating Station. The design of an advanced prototype BARS as an optimized process alternative was the result of KLM's initial Phase 1 SBIR program with the DOE in 1984 and 1985

Barbell-shaped stir bar sorptive extraction using dummy template molecularly imprinted polymer coatings for analysis of bisphenol A in water.

Science.gov (United States)

Liu, Ruimei; Feng, Feng; Chen, Guolin; Liu, Zhimin; Xu, Zhigang

2016-07-01

This study reports the development of a novel dummy template molecularly imprinted polymer (MIP)-coated barbell-shaped stir bar. The MIP stir bar coatings were prepared by using 2,2-bis(4-hydroxyphenyl)butane (BPB), 4,4'-dihydroxydiphenylmethane (BPF), 4-tert-butylphenol (PTBP), and tetrabromobisphenol A (TBBA) as dummy templates using a capillary in situ polymerization method. Uniform coatings can be prepared controllably. The method is simple, easy, and reproducible. The barbell-shaped stir bar was developed by using medical silicone tubes as wheels. The wheels could be removed and reinstalled when necessary; therefore, the barbell-shaped stir bar was easy to disassemble and reassemble. The novel MIP-coated stir bar showed good selectivity for the target analyte, bisphenol A (BPA). The established method is selective and sensitive with a lower detection limit for BPA of 0.003 μg/L. The dummy template MIP-coated stir bar is suitable for trace BPA analysis in real environmental water samples without template leakage. The novel stir bar can be used at least 100 times.

ANALISIS STRATEGI PENGEMBANGAN SEKTOR PERTANIAN SUB SEKTOR BAHAN PANGAN DI KABUPATEN BOYOLALI

Directory of Open Access Journals (Sweden)

Muhammad Zaenuri

2017-06-01

Full Text Available Permasalahan yang dikaji dalam penelitian ini adalah 1. Komoditas tanaman bahan makanan unggulan apa saja yang ada di masing-masing kecamatan di Kabupaten Boyolali, 2 Bagaimana strategi perencanaan pengembangan subsektor tanaman bahan makanan dilihat dari kelengkapan infrastruktur di Kabupaten Boyolali, 3 Bagaimana laju pertumbuhan sektor tanaman bahan makanan yang dimiliki tiap kecamatan di Kabupaten Boyolali. Data yang digunakan adalah data sekunder. Metode analisis data menggunakan analisis Location Quotient (LQ, Shift Share (SS, Klassen Typologi. Berdasarkan hasil penelitian dengan menggunakan analisis Location Quotient (LQ diketahui pengembangan komoditas padi terdapat di Kecamatan Ngemplak, Kecamatan Banyudono, Kecamatan Sawit. Komoditas tanaman jagung terdapat di Kecamatan Selo, Kecamatan Ampel, Kecamatan Cepogo dan Kecamatan Musuk. Komoditas ubi kayu di Kecamatan Klego, kecamatan Simo. Komoditas ubi jalar di Kecamatan Selo, Kecamatan Simo dan Kecamatan Mojosongo. Komoditas kacang tanah ada di Kecamatan Boyolali dan Kecamatan Nogosari. Komoditas kedelai di Kecamatan Juwangi, Kecamatan Sambi, Kecamatn Kemusu dan Kecamatan Wonosegoro. The problems that were in this research is 1 Commodities food plants seed material what it was in each carpel kecamatan in kabupaten boyolali, 2 how strategy sub planning the development of the food crops sector seen from the completeness of the infrastructure in boyolali district, 3 how sector growth rate of plants of food material possessed every sub-district in boyolali district. The data used was secondary data. Data analysis methods using analysis loqation quotient (LQ, shift share (SS, klassen typologi . According to the research using analysis loqation quotient (LQ development rice is in in ngemplak, in banyudono, in palm. Corn is crops in district violoncello, in ampel, in cepogo and in musuk. Commodities cassava in district klego, in simo. Commodities sweet potatoes in in violoncello, in simo and

ANALISIS SPASIAL FAKTOR LINGKUNGAN PADA KEJADIAN DEMAM BERDARAH DENGUE DI KECAMATAN GENUK

Directory of Open Access Journals (Sweden)

Kartika Kirana

2017-10-01

Full Text Available ABSTRAK Kecamatan Genuk merupakan salah satu kecamatan yang endemis DBD di Kota Semarang. Secara berturut-turut sejak tahun 2012 hingga 2014, Kecamatan Genuk masuk sebagai tiga besar kasus DBD terbanyak. Salah satu faktor yang mempengaruhi kejadian DBD adalah faktor lingkungan. Tujuan penelitian ini adalah untuk mengetahui gambaran dari hasil analisis spasial faktor lingkungan dengan kejadian DBD di Kecamatan Genuk. Jenis penelitian ini deskriptif dengan pendekatan kuantitatif. Fokus penelitian ini adalah kondisi SPAL, penumpukan ban bekas dan sumur gali. Penelitian ini dilakukan di Kecamatan Genuk (Kelurahan Genuksari, Karangroto, Bangetayu Kulon dan Banjardowo pada bulan Maret 2016. Instrumen meliputi lembar observasi, peta lokasi, Global Positioning System (GPS, alat fotografi dan AcrGIS. Analisis data menggunakan SIG. Hasil penelitian menunjukkan bahwa kejadian DBD menggerombol pada beberapa RW yang berdekatan dengan keberadaan penumpukan ban bekas sekitar permukiman dan sumur gali terbuka.   Kata Kunci        : demam berdarah (DBD, lingkungan, analisis spasial     ABSTRACT Genukis one of dengue fever endemic district in Semarang city. Since 2012 until 2014, Genuk involve as the place that has high incidence of Dengue Fever. One of the factors in the incidence Dengue Fever areenvironmental factors.The goals of this research wasto analize spatial environmental factorsin the incidence Dengue Fever in Genukdistrict. This was a quantitative descriptive research with descriptive survey. The unit this research was water puddle on the pilling of the tire, the dug wells, and waste water pipeline that located in Genuk District (Subdistrict of Genuksari, Karangroto, Bangetayu Kulon and Banjardowo at March 2016. The instruments were paper of observation,the  map, GPS, camera and ArcGIS. Data was analyzed with GIS. The study showed that dengue fever transmission was inthe area with pilling of the tire, and the dug wells.   Keywords �

An exploratory study of drug use in bar environments

Science.gov (United States)

Trocki, Karen; Michalak, Laurence; McDaniel, Patricia

2010-01-01

The purpose of this paper is to explore the characteristics of bars where drug use was observed compared to those where no drug use was observed. The study was done through a combination of qualitative and quantitative techniques gleaned through observations and interviews. Among the most important of indicators were the type of activity (particularly dancing) and the level of rowdiness evident in the bars. In addition drug use bars had higher levels of other types of rule-breaking. Patron characteristics (more men) and behavioral patterns (more sexual risk-taking) also distinguished these bars. PMID:25221431

Defining the formative discharge for alternate bars in alluvial rivers

Science.gov (United States)

Redolfi, M.; Carlin, M.; Tubino, M.; Adami, L.; Zolezzi, G.

2017-12-01

We investigate the properties of alternate bars in long straight reaches of channelized streams subject to an unsteady, irregular flow regime. To this aim we propose a novel integration of a statistical approach with the analytical perturbation model of Tubino (1991) which predicts the evolution of bar properties (namely amplitude and wavelength) as consequence of a flood. The outcomes of our integrated modelling approach are probability distribution of the bar properties, which depend essentially on two ingredients: (i) the statistical properties of the flow regime (duration, frequency and magnitude of the flood events, and (ii) the reach-averaged hydro-geomorphic characteristics of the channel (bed material, channel gradient and width). This allows to define a "bar-forming" discharge value as the flow value which would reproduce the most likely bar properties in a river reach under unsteady flow. Alternate bars are often migrating downstream and growing or declining during flood events. The timescale of bar growth and migration is often comparable with the duration of the floods: consequently, bar properties such as height and wavelength do not respond instantaneously to discharge variations (i.e. quasi-equilibrium response) but may depend on previous flood events. Theoretical results are compared with observations in three Alpine, channelized gravel bed rivers with encouraging outcomes.png" class="documentimage" >

Does a tow-bar increase the risk of neck injury in rear-end collisions?

Science.gov (United States)

Olesen, Anne Vingaard; Elvik, Rune; Andersen, Camilla Sloth; Lahrmann, Harry S

2018-06-01

Does a tow-bar increase the risk of neck injury in the struck car in a rear-end collision? The rear part of a modern car has collision zones that are rendered nonoperational when the car is equipped with a tow-bar. Past crash tests have shown that a car's acceleration was higher in a car equipped with a tow-bar and also that a dummy placed in a car with a tow-bar had higher peak acceleration in the lower neck area. This study aimed to investigate the association between the risk of neck injury in drivers and passengers, and the presence of a registered tow-bar on the struck car in a rear-end collision. We performed a merger of police reports, the National Hospital Discharge Registry, and the National Registry of Motor Vehicles in Denmark. We identified 9,370 drivers and passengers of whom 1,519 were diagnosed with neck injury within the first year after the collision. We found a statistically insignificant 5% decrease in the risk of neck injury in the occupants of the struck car when a tow-bar was fitted compared to when it was not fitted (hazard ratio=0.95; 95% confidence level=0.85-1.05; p=0.32). The result was controlled for gender, age, and the seat of the occupant. Several other collision and car characteristics and demographic information on the drivers and passengers were evaluated as confounders but were not statistically significant. The present study may serve as valuable input for a meta-analysis on the effect of a tow-bar because negative results are necessary in order to avoid publication bias. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Analysis of FRP bars used as reinforcement in concrete structures

Directory of Open Access Journals (Sweden)

Kinga Brózda

2016-09-01

Full Text Available In the design and construction of building and engineering structures, it is of utmost importance to provide their reliability and safety. The use of FRP (Fiber Reinforced Polymers bars as reinforcement of structural concrete elements could help reducing the typical defects of reinforced concrete and increase its strength parameters. In the paper the selected FRP bar characteristic properties are presented and advantages derived therefrom are specified. Furthermore, the most commonly used in construction types of FRP bars, depending on the raw material used during the production process are listed. In addition, the possibility of recycling of elements reinforced with FRP bars is presented and compared with traditional reinforced concrete (reinforced with steel bars. The production method of FRP bars (pultrusion is shown. Moreover, the advantages and disadvantages of using this method are discussed.

{Lambda}{bar {Lambda}} production in two-photon interactions

Energy Technology Data Exchange (ETDEWEB)

Anderson, S.; Kubota, Y.; Lattery, M.; ONeill, J.J.; Patton, S.; Poling, R.; Riehle, T.; Savinov, V.; Smith, A. [University of Minnesota, Minneapolis, Minnesota 55455 (United States); Alam, M.S.; Athar, S.B.; Ling, Z.; Mahmood, A.H.; Severini, H.; Timm, S.; Wappler, F. [State University of New York at Albany, Albany, New York 12222 (United States); Anastassov, A.; Blinov, S.; Duboscq, J.E.; Fujino, D.; Fulton, R.; Gan, K.K.; Hart, T.; Honscheid, K.; Kagan, H.; Kass, R.; Lee, J.; Spencer, M.B.; Sung, M.; Undrus, A.; Wanke, R.; Wolf, A.; Zoeller, M.M. [Ohio State University, Columbus, Ohio 43210 (United States); Nemati, B.; Richichi, S.J.; Ross, W.R.; Skubic, P.; Wood, M. [University of Oklahoma, Norman, Oklahoma 73019 (United States); Bishai, M.; Fast, J.; Gerndt, E.; Hinson, J.W.; Menon, N.; Miller, D.H.; Shibata, E.I.; Shipsey, I.P.; Yurko, M. [Purdue University, West Lafayette, Indiana 47907 (United States); Gibbons, L.; Johnson, S.D.; Kwon, Y.; Roberts, S.; Thorndike, E.H. [University of Rochester, Rochester, New York 14627 (United States); Jessop, C.P.; Lingel, K.; Marsiske, H.; Perl, M.L.; Schaffner, S.F.; Ugolini, D.; Wang, R.; Zhou, X. [Stanford Linear Accelerator Center, Stanford University, Stanford, California 94309 (United States); Coan, T.E.; Fadeyev, V.; Korolkov, I.; Maravin, Y.; Narsky, I.; Shelkov, V.; Staeck, J.; Stroynowski, R.; Volobouev, I.; Ye, J. [Southern Methodist University, Dallas, Texas 75275 (United States); Artuso, M.; Efimov, A.; Frasconi, F.; Gao, M.; Goldberg, M.; He, D.; Kopp, S.; Moneti, G.C.; Mountain, R.; Mukhin, Y.; Schuh, S.; Skwarnicki, T.; Stone, S.; Viehhauser, G.; Xing, X. [Syracuse University, Syracuse, New York 13244 (United States); Bartelt, J.; Csorna, S.E.; Jain, V.; Marka, S. [Vanderbilt University, Nashville, Tennessee 37235 (United States); Freyberger, A.; Gibaut, D.; Godang, R.; Kinoshita, K.; Lai, I.C.; Pomianowski, P.; Schrenk, S.; and others

1997-09-01

Using the CLEO detector at the Cornell e{sup +}e{sup {minus}} storage ring CESR we study the two-photon production of {Lambda}{bar {Lambda}}, making the first observation of {gamma}{gamma}{r_arrow}{Lambda}{bar {Lambda}}. We present the cross section for {gamma}{gamma}{r_arrow}{Lambda}{bar {Lambda}} as a function of the {gamma}{gamma} center of mass energy and compare it to that predicted by the quark-diquark model. {copyright} {ital 1997} {ital The American Physical Society}

A General and Mild Approach to Controllable Preparation of Manganese-Based Micro- and Nanostructured Bars for High Performance Lithium-Ion Batteries.

Science.gov (United States)

Ma, Guo; Li, Sheng; Zhang, Weixin; Yang, Zeheng; Liu, Shulin; Fan, Xiaoming; Chen, Fei; Tian, Yuan; Zhang, Weibo; Yang, Shihe; Li, Mei

2016-03-07

One-dimensional (1D) micro- and nanostructured electrode materials with controllable phase and composition are appealing materials for use in lithium-ion batteries with high energy and power densities, but they are challenging to prepare. Herein, a novel ethanol-water mediated co-precipitation method by a chimie douce route (synthesis conducted under mild conditions) has been exploited to selectively prepare an extensive series of manganese-based electrode materials, manifesting the considerable generalizability and efficacy of the method. Moreover, by simply tuning the mixed solvent and reagents, transition metal oxide bars with differing aspect ratios and compositions were prepared with an unprecedented uniformity. Application prospects are demonstrated by Li-rich 0.5 Li2 MnO3 ⋅0.5 LiNi1/3 Co1/3 Mn1/3 O2 bars, which demonstrate excellent reversible capacity and rate capability thanks to the steerable nature of the synthesis and material quality. This work opens a new route to 1D micro- and nanostructured materials by customizing the precipitating solvent to orchestrate the crystallization process. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

CSER 79-028, Addendum 2: Security bar addition to pedestal storage racks in Room 3 in 2736-Z Building

International Nuclear Information System (INIS)

Miller, E.M.

1994-01-01

The Plutonium Finishing Plant (PFP) is installing security bars on plutonium storage racks in Room 3 in 2736-Z Building to meet International Atomic Energy Agency (IAEA) material control requirements. Figures show the existing arrangement and design of the security bars. The security bars are to be fabricated of aluminum or carbon steel. The detailed fabrication sketches are reproduced in Appendix C. The security bars are to be installed close to the chains of plutonium so a determination of their effect on criticality safety needs to be made. The addition of security bars to the storage array of 2.5 kg plutonium buttons in Room 3 can effect reactivity by reflecting neutrons back into the plutonium in the storage cans, by absorbing neutrons, and by moderating neutrons between stored plutonium buttons. The small amount of metal added by the storage bars in comparison to the amount of concrete in the walls and aluminum in the shelf monitors already in place would not significantly increase the k eff of the storage array. Several computer calculations in previous analyses show that the security bars will have a negligible affect on reactivity

Study of Charged Particle Species Produced in Association with $\\bar{B}$⁰, B^-, and $\\bar{B}$$0\\atop{s}$ Mesons in p$\\bar{p}$ collisions at √s = 1.96-TeV

Energy Technology Data Exchange (ETDEWEB)

Usynin, Denys [Univ. of Pennsylvania, Philadelphia, PA (United States)

2005-01-01

The authors study the yields of charged kaons, charged pions, and protons produced in association with B mesons produced in proton-antiproton collisions at center of mass energy 1960 GeV using 355 pb^-1 of data collected with the CDF detector at the Fermilab Tevatron. This is the first reported measurements of these yields at a hadron collider. The B mesons are reconstructed using their semileptonic decays: B⁰ → ℓ⁺D^-X, D^- → K⁺π^-π^-; B⁰ → ℓ⁺D*^-X, D*^- → π^-$\\bar{D}$⁰,$\\bar{D}$⁰ → K⁺π^-; B⁺ → ℓ⁺$\\bar{D}$⁰X, $\\bar{D}$⁰ → K⁺π^-; B_s→ℓ⁺D$-\\atop{s}$ X, D$-\\atop{s}$ → π^-Φ,Φ → K⁺K^-. The K, π, and p are identified using the Time of Flight detector (TOF), the CDF spectrometer, and the specific ionization (dE/dx) measured in the central drift chamber (COT). The fraction of charged kaons produced in association with $\\bar{B}$$0\\atop{s}$ mesons is found to be larger than the fraction produced in association with the $\\bar{B}$$0\\atop{s}$ and B^- mesons, as expected from naive models of heavy quark hadronization to mesons. The particle species yields are found to be in qualitative agreement with simulation of B meson production in hadron collisions from the PYTHIA Monte Carlo, although the yield of kaons around $\\bar{B}$$0\\atop{s}$ mesons is found to be larger in the simulation when compared to the data. These studies are important for understanding methods of identifying the flavor of $\\bar{B}$$0\\atop{s}$ mesons in measurement of $\\bar{B}$$0\\atop{s}$ flavor oscillations and charge conjugation-parity (CP) violation in $\\bar{B}$$0\\atop{s}$ meson decays.

Tobacco marketing receptivity and other tobacco product use among young adult bar patrons

Science.gov (United States)

Thrul, Johannes; Lisha, Nadra E.; Ling, Pamela M.

2016-01-01

Purpose Use of other tobacco products (smokeless tobacco, hookah, cigarillo, e-cigarettes) is increasing, particularly among young adults, and there are few regulations on marketing for these products. We examined the associations between tobacco marketing receptivity and other tobacco product (OTP) use among young adult bar patrons (aged 18-26 years). Methods Time-location sampling was used to collect cross-sectional surveys from 7,540 young adult bar patrons from January 2012 through March of 2014. Multivariable logistic regression analyses in 2015 examined if tobacco marketing receptivity was associated (1) with current (past 30 day) OTP use controlling for demographic factors, and (2) with dual/poly use among current cigarette smokers (n=3,045), controlling for demographics and nicotine dependence. Results Among the entire sample of young adult bar patrons (Mage=23.7, SD=1.8; 48.1% female), marketing receptivity was consistently associated with current use of all OTP including smokeless tobacco (adjusted odds ratio [AOR]= 2.49, 95% confidence interval [CI] 1.90-3.27, pmarketing receptivity was significantly associated with use of smokeless tobacco (AOR=1.44, 95% CI 1.05-1.98, pmarketing receptivity. Efforts to limit tobacco marketing should address OTP in addition to cigarettes. PMID:27707516

Measurement of the $\\bar{B}$⁰ → D^*+ℓ^-$\\bar{v}$ Branching Fraction with a Partial Reconstruction Technique

Energy Technology Data Exchange (ETDEWEB)

Sonnek, Peter [Univ. of Mississippi, Oxford, MS (United States)

2009-08-01

Presented is a precise measurement of the $\\bar{B}$⁰ → D*⁺ℓ^-$\\bar{v}$_ℓ branching fraction using 81.47 fb^-1 of data collected with the BABAR detector at the PEP-II e⁺e^- storage ring at the Stanford Linear Accelerator Center. The measurement was performed by partially reconstructing the D*⁺ meson from $\\bar{B}$⁰ → D*⁺ℓ^-$\\bar{v}$_ℓ decays using only the soft pion of the D*⁺ → D⁰π⁺ decay to reconstruct its four vector. The branching fraction was measured to be β($\\bar{B}$⁰ → D*⁺ℓ^-$\\bar{v}$_ℓ) = (4.91 ± 0.01_stat ± 0.15_syst)%.

Profiling, analisi delle prestazioni e proposte per l'ottimizzazione del RDBMS MySQL utilizzato dal progetto DIRAC/LHCbDIRAC

CERN Document Server

Mesin, Alberto

Il lavoro presentato in questa tesi riguarda lo studio, l'analisi e la formula- zione di proposte per il miglioramento del database di back-end del progetto DIRAC/LHCbDIRAC. LHCbDIRAC, basato su DIRAC, e il sistema di sot- tomissione per l'accesso all'infrastruttura distribuita Grid per l'esperimento LHCb del CERN. Ad esso e adata la gestione dei job di Produzione, Mer- ge, Ricostruzione degli Eventi e Analisi per i dati sperimentali e simulati. Il sistema utilizza un RDBMS MySQL per la gestione di numerosi databa- se. La volonta di passare ad un motore relazionale e transazionale per la denizione schemi e la possibilita che, in un recente futuro, il DBMS possa rappresentare un serio limite alle prestazioni del sistema stesso hanno reso necessario questo studio. Il lavoro svolto si e concentrato sul proling di un singolo schema relazionale per il quale sono stati utilizzati metodi di analisi e fornite soluzioni ai problemi riscontrati il quanto piu possibile generali e per tanto validi per l'intero sistema. L...

Oscillations of rigid bar in the special relativity

International Nuclear Information System (INIS)

Paiva, F.M.; Teixeira, A.F.F.

2011-12-01

In the special relativity, a rigid bar slides on herself, with a extreme oscillating harmonically. We have discovered at the movement amplitude and in the bar length, indispensable for the elimination of non physical solutions

Near-Bed Turbulent Kinetic Energy Budget Under a Large-Scale Plunging Breaking Wave Over a Fixed Bar

Science.gov (United States)

van der Zanden, Joep; van der A, Dominic A.; Cáceres, Iván.; Hurther, David; McLelland, Stuart J.; Ribberink, Jan S.; O'Donoghue, Tom

2018-02-01

Hydrodynamics under regular plunging breaking waves over a fixed breaker bar were studied in a large-scale wave flume. A previous paper reported on the outer flow hydrodynamics; the present paper focuses on the turbulence dynamics near the bed (up to 0.10 m from the bed). Velocities were measured with high spatial and temporal resolution using a two component laser Doppler anemometer. The results show that even at close distance from the bed (1 mm), the turbulent kinetic energy (TKE) increases by a factor five between the shoaling, and breaking regions because of invasion of wave breaking turbulence. The sign and phase behavior of the time-dependent Reynolds shear stresses at elevations up to approximately 0.02 m from the bed (roughly twice the elevation of the boundary layer overshoot) are mainly controlled by local bed-shear-generated turbulence, but at higher elevations Reynolds stresses are controlled by wave breaking turbulence. The measurements are subsequently analyzed to investigate the TKE budget at wave-averaged and intrawave time scales. Horizontal and vertical turbulence advection, production, and dissipation are the major terms. A two-dimensional wave-averaged circulation drives advection of wave breaking turbulence through the near-bed layer, resulting in a net downward influx in the bar trough region, followed by seaward advection along the bar's shoreward slope, and an upward outflux above the bar crest. The strongly nonuniform flow across the bar combined with the presence of anisotropic turbulence enhances turbulent production rates near the bed.

Il difficile cammino dell’analisi musicale in Italia

Directory of Open Access Journals (Sweden)

Claudio Annibaldi

2014-10-01

Full Text Available Si immaginino gli atti d’un convegno sull’analisi musicale che abbia avuto luogo in un paese come la Francia, la Germania, l’ Inghilterra o gli Stati Uniti. Potrebbe mai accadere che essi vengano pubblicati sostituendo il discorso ufficiale d’apertura dei lavori con un testo tutto nuovo epperò simulante d’esser quello effettivamente pronunciato dall’autore? E potrebbe mai accadere - essendo costui un noto critico musicale e il direttore della collana editoriale comprendente gli atti in questione - che questo nuovo testo sia da lui dedicato a uno sfoggio della propria competenza analitica capace solo di esibire una visione dilettantesca della tecnica musicale tout court? Penso proprio di no. Eppure questo è accaduto in Italia non molti anni fa, quando le Edizioni Unicopli pubblicarono, nella collana dei "Quaderni di Musica/Realtà", gli atti di un convegno sull’analisi musicale tenuto nel 1989 a Reggio Emilia: il primo del genere negli annali della musicologia italiana. L’episodio rende bene l’idea dei pericoli incombenti sul cammino di quegli studiosi che, a far data dal convegno suddetto, si sono adoperati a che la pratica analitica acquisisse anche da noi la dignità scientifica di cui gode, appunto, in paesi come la Francia, la Germania, l’Inghilterra o gli Stati Uniti. Quei pericoli si chiamano ‘dilettantismo tecnico’, ‘arroganza intellettuale’, ‘ vezzo d’ imporre l’uno e l’altra grazie a un qualche tipo di potere personale’, ‘necessità di subire tale imposizione in cambio di qualche vantaggio pratico’.

ANALISIS SPASIAL PADA KEJADIAN LUAR BIASA (KLB MALARIA DI DESA PANUSUPAN KECAMATAN REMBANG DAN DESA SIDAREJA KECAMATAN KALIGONDANG KABUPATEN PURBALINGGA

Directory of Open Access Journals (Sweden)

Widiarti Widiarti

2015-01-01

remain high enough with 94 people sick in Panusupan Village  and  37  people  in  Rembang  Village  Purbalingga  Regency.  Due  to  the  reason,  it  is  important  to conduct a confirmation of malaria vector and another factors that take an important role in those area.This research was conducted to investigate the confirmation of malaria vectors, spacial analysis malaria cases, entomological indicator and another factors in relation with the malaria outbreak. The study was carried out in two malaria endemic villages namely: Panusupan Village Rembang Subdistrict and Sidareja Village, Kaligondang Subdistrict Purbalingga Regency. The confirmation of malaria vectors was carried out using sporozoid elisa, spatial analysis of malaria cases using geographical information system (GIS and entomological indicator using WHO standart. The result of the outdoor landing on man collecting revealed  that  mosquito  species  remain  malaria  vectors  only  An.  maculatus  from  Panusupan  Village Rembang Subdistrict was positive sporozoid. Spatial analysis on the two areas show that malaria cases were distributed on clumped/cluster, buffer zones against breeding habitat (<400 meters, indicate local transmission (indigenous due to vector behaviour. Based on these results we conclude that An. maculatus is the vector of malaria in those areas, so that it can be useful as information for the program to perform a control or prevention further spread of malaria in that areas. Due to the vector behaviour activity at evening until midnight when the community heavy sleep, therefore vector control using Long Lasting Insectiside Nets (LLIN will protect them from man-mosquito contact so that the malaria transmision could be minimized. Intensified the need for migration surveys for people returning from malaria-endemic area outside Java.Keywords : spacial analisis, outbreak, Anopheles maculatus and malaria

In-situ Monitoring of Sub-cooled Nucleate Boiling on Fuel Cladding Surface in Water at 1 bar and 130 bars using Acoustic Emission Method

Energy Technology Data Exchange (ETDEWEB)

Baek, Seung Heon; Wu, Kaige; Shim, Hee-Sang; Lee, Deok Hyun; Hur, Do Haeng [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Crud deposition increases through a sufficient corrosion product supply around the steam-liquid interface of a boiling bubble. Therefore, the understanding of this SNB phenomenon is important for effective and safe operation of nuclear plants. The experimental SNB studies have been performed in visible conditions at a low pressure using a high speed video camera. Meanwhile, an acoustic emission (AE) method is an on-line non-destructive evaluation method to sense transient elastic wave resulting from a rapid release of energy within a dynamic process. Some researchers have investigated boiling phenomena using the AE method. However, their works were performed at atmospheric pressure conditions. Therefore, the objective of this work is for the first time to detect and monitor SNB on fuel cladding surface in simulated PWR primary water at 325 .deg. C and 130 bars using an AE technique. We successfully observed the boiling AE signals in primary water at 1 bar and 130 bars using AE technique. Visualization test was performed effectively to identify a correlation between water boiling phenomenon and AE signals in a transparent glass cell at 1 bar, and the boiling AE signals were in good agreement with the boiling behavior. Based on the obtained correlations at 1 bar, the AE signals obtained at 130 bars were analyzed. The boiling density and size of the AE signals at 130 bars were decreased by the flow parameters. However, overall AE signals showed characteristics and a trend similar to the AE signals at 1 bar. This indicates that boiling AE signals are detected successfully at 130 bars, and the AE technique can be effectively implemented in non-visualized condition at high pressures.

Resonant Higgs boson pair production in the $hh\\rightarrow b\\bar{b} \\; WW \\rightarrow b\\bar{b} \\ell^+ \

CERN Document Server

Martín Lozano, Víctor; Park, Chan Beom

2015-01-01

Adding a scalar singlet provides one of the simplest extensions of the Standard Model. In this work we briefly review the latest constraints on the mass and mixing of the new Higgs boson and study its production and decay at the LHC. We mainly focus on double Higgs production in the $hh \\rightarrow b \\bar{b} WW \\rightarrow b \\bar{b} \\ell^+ \

Modelling the motion of {112-bar 2} twinning dislocations in the HCP metals

International Nuclear Information System (INIS)

Serra, A.; Bacon, D.J.

2005-01-01

Deformation twinning is important for plasticity of the hcp metals, but little is known about the dynamics of the mechanisms that control twin boundary motion. With the exception of the {112-bar 1} twin, atomic shuffles are required for glide of twinning dislocations and hence boundary movement is temperature-dependent. A computer method has been developed to simulate a step with dislocation character in a boundary with full periodicity in the boundary plane, i.e. along both the direction of the line of the defect and its direction of motion. It may be used to investigate the properties of such interfaces as the defects in them move over large distances. We explain the nature of the method and apply it to study the motion of twinning dislocations in the {112-bar 2} boundary as a function of applied stress and temperature. A new reaction at the boundary leading to the creation of a (c+a) crystal dislocation and a {112-bar 1} micro-twin is described

Universal precision sine bar attachment

Science.gov (United States)

Mann, Franklin D. (Inventor)

1989-01-01

This invention relates to an attachment for a sine bar which can be used to perform measurements during lathe operations or other types of machining operations. The attachment can be used for setting precision angles on vises, dividing heads, rotary tables and angle plates. It can also be used in the inspection of machined parts, when close tolerances are required, and in the layout of precision hardware. The novelty of the invention is believed to reside in a specific versatile sine bar attachment for measuring a variety of angles on a number of different types of equipment.

Analisis Algoritma Pergantian Cache Pada Proxy Web Server Internet Dengan Simulasi

OpenAIRE

Nurwarsito, Heru

2007-01-01

Pertumbuhan jumlah client internet dari waktu ke waktu terus bertambah, maka respon akses internet menjadi semakin lambat. Untuk membantu kecepatan akses tersebut maka diperlukan cache pada Proxy Server. Penelitian ini bertujuan untuk menganalisis performansi Proxy Server pada Jaringan Internet terhadap penggunaan algoritma pergantian cache-nya.Analisis Algoritma Pergantian Cache Pada Proxy Server didesain dengan metoda pemodelan simulasi jaringan internet yang terdiri dari Web server, Proxy ...

Microstructural changes in zirconium alloy bar due to multi-roll straightening

International Nuclear Information System (INIS)

Gouraharidas; Acharya, Swaroop; Pratap, Y.; Chaube, R.K.; Kiran Kumar, I.; Ramana Rao, A.V.; Saibaba, N.

2010-01-01

Zirconium alloy bar is the input material for making of end plugs required for encapsulating the uranium di-oxide pellets in the fuel tubes. These bars are manufactured through extrusion followed by multi-pass swaging with intermediate and final vacuum annealing. The straightened and ground bars are subjected to 100% Ultrasonic testing and Eddy current testing to identify flaws and micro-porosity in the material, which could otherwise affect the integrity of fuel element. The defect standards at ultrasonic and eddy current inspection have been made more stringent, in view of the importance of fuel pin integrity during reactor operation. Consequently, many of the rods have shown eddy current indications greater than the defect standard. Detailed microstructural examination was carried out at each process step to identify the cause for these indications. Characteristic variation in the grain size and microstructure were noticed from surface to the centre of the material. Correlation between residual stresses and the eddy current signals was established. The extent of residual stresses could be controlled by adopting improvised straightening method at the final stage. This paper deals with the various trials carried out and the conclusions arrived at. (author)

ANALISIS FAKTOR-FAKTOR YANG MENDORONG WISATAWAN MELAKUKAN KEPUTUSAN PEMBELIAN TIKET PESAWAT MELALUI MOBILE BOOKING PADA SITUS TRAVELOKA.COM

Directory of Open Access Journals (Sweden)

Erni Muliana

2016-07-01

Full Text Available Pembelian kebutuhan perjalanan wisata secara online merupakan bagian dari transaksi business to-customer (B2C. Produk yang ditawarkan biasanya terdiri dari: pemesanan paket wisata, penjualan tiket pesawat dan kereta api, kamar hotel dan penyewaan transportasi. Penelitian dilakukan dengan tujuan untuk mengetahui faktor-faktor yang mendorong wisatawan melakukan keputusan pembelian tiket pesawat melalui mobile booking pada situs Traveloka.com serta faktor yang paling banyak berkontribusi dalam menentukan keputusan pembelian tersebut. Teknik pengumpulan data yang digunakan adalah kuesioner online dan kuesioner yang disebarkan secara langsung (offline kepada 250 responden, penentuan responden ditetapaka menggunakn metode purposive sampling, sedangkan teknik analisis data yang digunakan adalah teknik analisis faktor. Hasil analisis faktor yang didapatakan menjelaskan 67,066% dari keseluruhan total variance, dan hasil analisis data menunjukkan empat faktor terbentuk yang mendorong wisatawan melakukan keputusan pembelian tiket pesawat melalui mobile booking pada situs Traveloka.com, yaitu: kemudahan dan sistem informasi website (24,396 %, pelayanan konsumen/customer service (15,211%, citra perusahaan (14,681 %, dan motivasi pembelian (12,779%, adapun faktor yang paling berkontribusi dalam mendorong wisatawan melakukan keputusan pembelian tiket pesawat melalui mobile booking pada situs Traveloka.com adalah faktor terbentuk yang memiliki faktor laoding tertinggi dari keseluruhan faktor yang terbentuk, yaitu faktor “Kemudahan dan Sistem Informasi Website”, faktor ini terdiri dari 13 variabel yakni: (1 Kemudahan pencarian situs web, (2 kecepatan waktu mengakses (load time, (3 nama domain perusahaan, (4 kemudahan pemesanan, (5 Informasi yang lengkap, (6 Informasi yang akurat, (7 Informasi yang menarik, (8 Pemaparan informasi yang tepat, (9 Ketersediaan dan aksesibilitas, (10 Harga yang kompetitif, (11 Pengalaman secara keseluruhan, (12 Keamanan data

Search for the Higgs boson in the tt-bar H(H→bb-bar) channel and the identification of jets containing 2 B hadrons with the ATLAS experiment

International Nuclear Information System (INIS)

Ticse Torres, R.E.

2016-01-01

In July 2012, CERN announced the discovery of the Higgs boson, the last missing piece of the Standard Model (SM). The Higgs boson has been observed coupling directly to W and Z bosons and tau leptons, and indirectly to top quarks. Observing the Higgs boson production in association with a pair of top quarks (tt-bar H) would allow a direct measurement of the top quark Yukawa coupling and provides an important test of the Higgs mechanism within the SM. This thesis presents a search for the Higgs boson in the tt-bar H(H→ bb-bar) channel using proton-proton collisions at √s=13 TeV, collected with the ATLAS detector in 2015 and 2016. The Higgs boson decays to two b quarks and top quark pair decays with one lepton, the tt-bar H → (lνb)(jjb)(bb-bar) single lepton channel, are considered. This document details in particular the contributions made by the author in this search: the full reconstruction of the tt-bar H(H → bb-bar) single lepton system and the final discrimination between signal and the main background, tt-bar+jets. A new method was developed to solve the large combinatorial background by fully reconstructing the tt-bar H(H → bb-bar) final state using a multivariate technique to uniquely associate each reconstructed jets to the initial quarks. A multivariate technique was also used to discriminate between the signal and the main tt-bar+jets background further increasing the sensitivity of the search compared to the Run 1 analysis. Finally, the first result at √s=13 TeV shown. The signal strength (the ratio between the measured and predicted cross sections) is found to be 1.6 ± 1.1. No significant excess of events above the background expectation is found and an observed (expected) limit of 3.6 (2.2) is set at 95% confidence level. The tt-bar bb-bar is one of the main backgrounds for the tt-bar H(bb-bar) search. Recent studies with Monte Carlo events generators show that there is a large fraction of tt-bar bb-bar events with jets containing two b