Investigation of active interrogation techniques to detect special nuclear material in maritime environments: Boarded search of a cargo container ship

Energy Technology Data Exchange (ETDEWEB)

Grogan, Brandon R., E-mail: groganbr@ornl.gov; Henkel, James J.; Johnson, Jeffrey O.; Mihalczo, John T.; Miller, Thomas M.; Patton, Bruce W.

2013-12-01

The detonation of a terrorist nuclear weapon in the United States would result in the massive loss of life and grave economic damage. Even if a device was not detonated, its known or suspected presence aboard a cargo container ship in a U.S. port would have major economic and political consequences. One possible means to prevent this threat would be to board a ship at sea and search for the device before it reaches port. The scenario considered here involves a small Coast Guard team with strong intelligence boarding a container ship to search for a nuclear device. Using active interrogation, the team would nonintrusively search a block of shipping containers to locate the fissile material. Potential interrogation source and detector technologies for the team are discussed. The methodology of the scan is presented along with a technique for calculating the required interrogation source strength using computer simulations. MCNPX was used to construct a computer model of a container ship, and several search scenarios were simulated. The results of the simulations are presented in terms of the source strength required for each interrogation scenario. Validation measurements were performed in order to scale these simulation results to expected performance. Interrogations through the short (2.4 m) axis of a standardized shipping container appear to be feasible given the entire range of container loadings tested. Interrogations through several containers at once or a single container through its long (12.2 m) axis do not appear to be viable with a portable interrogation system.

Estimates of fire environments in ship holds containing radioactive material packages

International Nuclear Information System (INIS)

Koski, J.A.; Cole, J.K.; Hohnstreiter, G.F.; Wix, S.D.

1995-01-01

Fire environments that occur on cargo ships differ significantly from the fire environments found in land transport. Cargo ships typically carry a large amount of flammable fuel for propulsion and shipboard power, and may transport large quantities of flammable cargo. As a result, sea mode transport accident records contain instances of long lasting and intense fires. Since Irradiated Nuclear Fuel (INF) casks are not carried on tankers with large flammable cargoes, most of these dramatic, long burning fires are not relevant threats, and transport studies must concentrate on those fires that are most likely to occur. By regulation, INF casks must be separated from flammable cargoes by a fire-resistant, liquid-tight partition. This makes a fire in an adjacent ship hold the most likely fire threat. The large size of a cargo ship relative to any spent nuclear fuel casks on board, however, may permit a severe, long lasting fire to occur with little or no thermal impact on the casks. Although some flammable materials such as shipping boxes or container floors may exist in the same hold with the cask, the amount of fuel available may not provide a significant threat to the massive transport casks used for radioactive materials. This shipboard fire situation differs significantly from the regulatory conditions specified in 10 CFR 71 for a fully engulfing pool fire. To learn more about the differences, a series of simple thermal analyses has been completed to estimate cask behavior in likely marine and land thermal accident situations. While the calculations are based on several conservative assumptions, and are only preliminary, they illustrate that casks are likely to heat much more slowly in shipboard hold fires than in an open pool fire. The calculations also reinforce the basic regulatory concept that for radioactive materials, the shipping cask, not the ship, is the primary protection barrier to consider

46 CFR 31.40-10 - Cargo Ship Safety Equipment Certificate-T/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo Ship Safety Equipment Certificate-T/ALL. 31.40-10 Section 31.40-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-10 Cargo Ship...

46 CFR 31.40-5 - Cargo Ship Safety Construction Certificate-T/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo Ship Safety Construction Certificate-T/ALL. 31.40-5 Section 31.40-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-5 Cargo Ship...

46 CFR 31.40-15 - Cargo Ship Safety Radio Certificate-T/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo Ship Safety Radio Certificate-T/ALL. 31.40-15 Section 31.40-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 31.40-15 Cargo Ship...

Experimental ship fire measurements with simulated radioactive cargo

International Nuclear Information System (INIS)

Koski, J.A.; Arviso, M.; Bobbe, J.G.; Wix, S.D.; Cole, J.K.; Hohnstreiter, G.F.; Beene, D.E. Jr.

1997-10-01

Results from a series of eight test fires ranging in size from 2.2 to 18.8 MW conducted aboard the Coast Guard fire test ship Mayo Lykes at Mobile, Alabama are presented and discussed. Tests aboard the break bulk type cargo ship consisted of heptane spray fires simulating engine room and galley fires, wood crib fires simulating cargo hold fires, and pool fires staged for comparison to land based regulatory fire results. Primary instrumentation for the tests consisted of two pipe calorimeters that simulated a typical package shape for radioactive materials packages

Experimental ship fire measurements with simulated radioactive cargo

International Nuclear Information System (INIS)

Koski, J.A.; Arvisol, M.; Bobbe, J.G.; Wix, S.D.; Cole, J.K.; Hohnstreiter, G.F.; Wix, S.D.; Beene, D.E.; Keane, M.P.

1998-01-01

Results from a series of eight test fires ranging in size from 2.2 to 18.8 MW conducted aboard the Coast Guard fire test ship Mayo Lykes at Mobile, Alabama are presented and discussed. Tests aboard the break-bulk type cargo ship consisted of heptane spray fires simulating engine room and galley fires, wood crib fires simulating cargo hold fires, and pool fires staged for comparison to land-based regulatory fire results. Primary instrumentation for the tests consisted of two pipe calorimeters that simulated a typical package shape for radioactive materials packages. (authors)

Analysis of Thermal Behavior in a Cargo Hold of LILW Transport Ship

Energy Technology Data Exchange (ETDEWEB)

Lee, Unjang; Kim, Dohyung; Lee, Dongkyu; Choi, Kyusup [Korea Nuclear Engineering and Service Corporation, Seoul (Korea, Republic of)

2007-07-01

With determining Kyongju as a repository site for the low and intermediate-level radioactive waste (LILW), it is time to decide transportation method to bring the waste from NPPs (Nuclear Power Plants) to the site. Now considering transport ship as an alternative, it is important to design cargo compartments in the ship. Especially, it is necessary to ensure thermal criteria in the cargo hold by using natural or forced convection. According to INF Code, there is addressed a technical standard of the cargo that adequate ventilation or refrigeration of enclosed cargo spaces shall be provided so that the average ambient temperature within such spaces does not exceed 55 .deg. C at any time. And many counties which operate LILW transport ships are conformable to the standard, and Ministry of Maritime Affairs and Fisheries of Korea also follows it. In this article analytical study of ventilation system in a cargo hold shows to keep the temperature below 55 .deg. C or not.

Defining freight rates as a contribution to the successful operation of container shipping companies

Directory of Open Access Journals (Sweden)

Renato Oblak

2016-12-01

Full Text Available The globalization of the world market and the flexibility of containerization to adjust to the constant changes in supply and demand of the international goods market, has led to a continuous increase in the portion of the container transport within the international maritime cargo transport. By the increase of the container transport level, the impact and importance of container freight rates have been growing, the variability of which directly reflects on the world economy. The aim of this paper is to analyze the efficiency of actual methods in establishing the container freight rates according to the problems which appear in the container shipping operation and refer to large differences in the weights of the actual transported cargo and the declared cargo in containers. The consequence of is lower freight rates and higher costs of the vessels exploitation, concerning the increase of the bunker oil consumption. The conducted research is based on actual data that have been collected and analyzed from particular container vessel liner services within period of 90 days and casting off from 16 container ports. The proposed measures could increase the level of usability of the transporting ships capacities and enable a more accurate and correct account of sea freight rates. The results of the research have shown that by increasing the control of accuracy of the cargo weight in containers and by improving the model of accounting, the freight rates can increase the incomes of shipping companies maintaining the same level of container traffic, which can have a direct influence on the efficiency of their successful operation.

Asphyxiation death caused by oxygen-depleting cargo on a ship.

Science.gov (United States)

Sundal, Marjana Kjetland; Lilleng, Peer Kaare; Barane, Hans; Morild, Inge; Vevelstad, Merete

2017-10-01

The extreme danger associated with entering enclosed spaces loaded with oxygen-depleting organic cargo in ships and tanks is obviously underestimated, both among crew and management. We present a case report to highlight this occupational hazard and to increase the knowledge about the imperative precautions, in order to prevent future accidents. An experienced customs officer was found lifeless at the bottom of the unattended cargo hold on a ship loaded with woodchips. The oxygen content in the cargo atmosphere was below 2%, which is incompatible with life. Forensic autopsy revealed injuries related to the fall, and there were no positive toxicological findings in blood, lung or urine. Management and workers must be taught about the extreme rapidity of developing unconsciousness and asphyxiant death when entering enclosed spaces loaded with oxygen-depleting cargo. Even a single inhalation can result in unconsciousness and death. Dozens of annual deaths and severe injuries can easily be prevented if simple precautions are followed. Copyright © 2017 Elsevier B.V. All rights reserved.

Designing container shipping network under changing demand and freight rates

Directory of Open Access Journals (Sweden)

C. Chen

2010-03-01

Full Text Available This paper focuses on the optimization of container shipping network and its operations under changing cargo demand and freight rates. The problem is formulated as a mixed integer non-linear programming problem (MINP with an objective of maximizing the average unit ship-slot profit at three stages using analytical methodology. The issues such as empty container repositioning, ship-slot allocating, ship sizing, and container configuration are simultaneously considered based on a series of the matrices of demand for a year. To solve the model, a bi-level genetic algorithm based method is proposed. Finally, numerical experiments are provided to illustrate the validity of the proposed model and algorithms. The obtained results show that the suggested model can provide a more realistic solution to the issues on the basis of changing demand and freight rates and arrange a more effective approach to the optimization of container shipping network structures and operations than does the model based on the average demand.

Simultaneous Optimization of Container Ship Sailing Speed and Container Routing with Transit Time Restrictions

DEFF Research Database (Denmark)

Karsten, Christian Vad; Røpke, Stefan; Pisinger, David

We introduce a decision support tool for liner shipping companies to optimally determine the sailing speed and needed fleet for a global network. As a novelty we incorporate cargo routing decisions with tight transit time restrictions on each container such that we get a realistic picture...

Column generation approaches to ship scheduling with flexible cargo sizes

DEFF Research Database (Denmark)

Brønmo, Geir; Nygreen, Bjørn; Lysgaard, Jens

We present a Dantzig-Wolfe procedure for the ship scheduling problem with flexible cargo sizes. This problem is similar to the well-known pickup and delivery problem with time windows, but the cargo sizes are defined by an interval instead of a fixed value. We show that the introduction of flexible...

Indications of marine bioinvasion from network theory. An analysis of the global cargo ship network

Science.gov (United States)

Kölzsch, A.; Blasius, B.

2011-12-01

The transport of huge amounts of small aquatic organisms in the ballast tanks and at the hull of large cargo ships leads to ever increasing rates of marine bioinvasion. In this study, we apply a network theoretic approach to examine the introduction of invasive species into new ports by global shipping. This is the first stage of the invasion process where it is still possible to intervene with regulating measures. We compile a selection of widely used and newly developed network properties and apply these to analyse the structure and spread characteristics of the directed and weighted global cargo ship network (GCSN). Our results reveal that the GCSN is highly efficient, shows small world characteristics and is positive assortative, indicating that quick spread of invasive organisms between ports is likely. The GCSN shows strong community structure and contains two large communities, the Atlantic and Pacific trading groups. Ports that appear as connector hubs and are of high centralities are the Suez and Panama Canal, Singapore and Shanghai. Furthermore, from robustness analyses and the network's percolation behaviour, we evaluate differences of onboard and in-port ballast water treatment, set them into context with previous studies and advise bioinvasion management strategies.

46 CFR 154.534 - Cargo pumps and cargo compressors.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo pumps and cargo compressors. 154.534 Section 154.534 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES... Equipment Cargo and Process Piping Systems § 154.534 Cargo pumps and cargo compressors. Cargo pumps and...

A POSSIBLE SOLUTION WITH PASSIVE PROTECTION STRUCTURAL RESISTANCE ELEMENTS TO CARGO SHIPS

Directory of Open Access Journals (Sweden)

MUNTEANU Ildikó Renata

2014-09-01

Full Text Available The authors are proposing an additional fire protection solution (semi-passive for cargo ships, by inserting in the tubular strength structure (hollow section, some rectangular, thin wall pipes manufactured of copper alloy, filled with cooling fluid, that, once the fire bursts, it will be activated (i.e. will be pumped into a closed circuit; this closed system contains also a well dimensioned radiator. This innovative solution could bring improvements with regard to the classic one, of intumescent paints, by extending the safe period for evacuating people and goods.

Shock and vibration environments for large shipping containers on rail cars and trucks

International Nuclear Information System (INIS)

Magnuson, C.F.; Wilson, L.T.

1977-06-01

The purpose of this study was to provide definitions of shock and vibration environment to which fissile material shipping containers may be exposed during normal shipment by truck and rail cars. The definitions of vibration, shock superimposed on vibration and rail coupling shock result from existing data. The dependence of shock environment, from rail coupling operations, on parameters like cargo weight and shock attenuation couplers was also studied using spring-mass models. These studies show that for rail cars equipped with standard draft gear, the cargo response decreases with increased cargo weight until the springs bottom out. For rail cars equipped with shock attenuation couplers, cargo weight has little effect on cargo response. The study also shows the importance of matching couplers and tiedown stiffnesses to decrease the cargo response. Vibration and shock data samples have been obtained during truck shipment of heavy cargo and the data will be presented in subsequent reports. Similar data need to be obtained for rail shipment of heavy cargo and during rail coupling operations with heavy cargo

System for inspection of stacked cargo containers

Science.gov (United States)

Derenzo, Stephen [Pinole, CA

2011-08-16

The present invention relates to a system for inspection of stacked cargo containers. One embodiment of the invention generally comprises a plurality of stacked cargo containers arranged in rows or tiers, each container having a top, a bottom a first side, a second side, a front end, and a back end; a plurality of spacers arranged in rows or tiers; one or more mobile inspection devices for inspecting the cargo containers, wherein the one or more inspection devices are removeably disposed within the spacers, the inspection means configured to move through the spacers to detect radiation within the containers. The invented system can also be configured to inspect the cargo containers for a variety of other potentially hazardous materials including but not limited to explosive and chemical threats.

Radiation Scanning Methods for Ship-to-Rail Intermodal Cargo Containers

International Nuclear Information System (INIS)

Reichmuth, Barbara A.; Stansbury, Paul S.; Taira, Randal Y.; Sanquist, Thomas F.; Collins, Robert

2009-01-01

The Department of Homeland Security's (DHS) Domestic Nuclear Detection Office (DNDO) runs the Rail Test Center (RTC) at the Port of Tacoma (POT). The RTC affords DNDO with the opportunity to test radiological and nuclear threat detection systems associated with the unique on-dock rail environment while in an operational seaport. DNDO selected the Pacific Northwest National Laboratory (PNNL) to manage the RTC. The RTC is conducting various evaluation studies to assess scanning opportunities in terms of their affects on the number of container moves required and the affect that the scanning opportunity has on the time it takes to move a container through the on-dock transfer process from ship to rail. The velocity and the number of container moves are directly associated with incremental costs to the terminal operators; increases in either of these parameters help in-form the potential for incremental costs that would result from the implementation of the opportunity.

System to detect contraband in cargo containers using fast and slow neutron irradiation and collimated gamma detectors

International Nuclear Information System (INIS)

Smith, R.C.; Hurwitz, M.J.; Tran, K.C.

1995-01-01

We have produced a product design concept for an automatic, shipping-container inspection system to be used for detection of contraband, including illicit drugs, and for trade regulation enforcement via shipping manifest confirmation. Using nondestructive nuclear techniques the system can see deeply into the cargo and generate a 3-D spatial image of an entire container's contents automatically and in real time. A pulsed, sealed-tube, neutron generator is employed. The approach divides a container into numerous, small, volume elements that are individually interrogated using concurrent fast and slow neutron activation and gamma detection by collimated scintillators. We have designed, built, and operated a laboratory apparatus which has demonstrated the attractiveness of this approach. Experimental data were found to agree with design expectations derived from computer modeling. By combining selected element signatures and phenomenological measures, together with discrimination algorithms, we have demonstrated that a full-scale inspection system would need from less than 5 min to 30 min (depending on cargo type) to process an 8 ftx8 ftx40 ft container in order to detect hidden contraband. (orig.)

Structural response of cargo containment systems in LNG carriers under ice loads

International Nuclear Information System (INIS)

Wang, B.; Yu, H.; Basu, R.; Lee, H.; Kwon, J.C.; Jeon, B.Y.; Kim, J.H.; Daley, C.; Kendrick, A.

2008-01-01

Gas exploration has been extended into the Arctic region such as in the Russian Arctic area, because of the increasing demand for energy resources. As a result, shipping in ice-covered seas is also increasing. Many technical issues are involved in ensuring the safety of liquefied natural gas (LNG) ships during the transportation. This paper discussed an investigation of ship-ice interaction scenarios for possible operation routes in Arctic areas. Six scenarios were selected to study the structural response of cargo containment systems (CCS) in both membrane and spherical types of LNG ships. For selected ship-ice interaction scenarios, ice loads and loading areas in the hull structure were determined based on the energy theory. The configurations of LNG carriers were discussed and illustrated. The paper also outlined the assessment criteria and structure analysis procedures. It was concluded that the strength of the CCS of membrane-type LNG carrier and the strength of the skirt structure of spherical-type LNG carrier were strong enough under the design ice loads. 13 refs., 9 tabs., 18 figs

Detector placement optimization for cargo containers using deterministic adjoint transport examination for SNM detection

International Nuclear Information System (INIS)

McLaughlin, Trevor D.; Sjoden, Glenn E.; Manalo, Kevin L.

2011-01-01

With growing concerns over port security and the potential for illicit trafficking of SNM through portable cargo shipping containers, efforts are ongoing to reduce the threat via container monitoring. This paper focuses on answering an important question of how many detectors are necessary for adequate coverage of a cargo container considering the detection of neutrons and gamma rays. Deterministic adjoint transport calculations are performed with compressed helium- 3 polyethylene moderated neutron detectors and sodium activated cesium-iodide gamma-ray scintillation detectors on partial and full container models. Results indicate that the detector capability is dependent on source strength and potential shielding. Using a surrogate weapons grade plutonium leakage source, it was determined that for a 20 foot ISO container, five neutron detectors and three gamma detectors are necessary for adequate coverage. While a large CsI(Na) gamma detector has the potential to monitor the entire height of the container for SNM, the He-3 neutron detector is limited to roughly 1.25 m in depth. Detector blind spots are unavoidable inside the container volume unless additional measures are taken for adequate coverage. (author)

Port Security: Container Cargo Control

Directory of Open Access Journals (Sweden)

Vladivoj Vlaković

2006-05-01

Full Text Available illicittrafficking of threat materials, especially explosives, chemicalsubstances and radioactive or nuclear material. The transportof the threat materials by using sea routes is an advantageto te"orists especially because of the possible use of ship containers.The container is the basis of world trade. It is assumed thatthe world total movement in containers is about 200 millionTEUs ("20-foot equivalent units" per year. The list of materialstransported by containers which should be subject to inspectionwith the aim of reducing the acts of te"orism includes explosives,narcotics, chemical weapons, hazardous chemicalsand radioactive materials.Of special interest is nuclear te"orism. The risk of nuclearte"orism carried out by sub-national groups should be considerednot only in the construction and/or use of nuclear device,but also in possible radioactive contamination of large urbanareas.The system of ship containers control is an essential componentof «smart border» concept. Modem personnel, parcel,vehicle and cargo inspection systems are non-invasive imagingtechniques based on the use of nuclear analytical techniques.The inspection systems use penetrating radiations: hard x-rays(300 keV or more or gamma-rays from radioactive sources(137Cs and 60Co with energies from 600 to 1300 keV that producea high resolution radiograph of the load. Unfortunately,this information is "non-specific" in that it gives no informationon the nature of objects that do not match_ the travel documentsand are not recognized by a visual analysis of the radiographicpicture. Moreover, there are regions of the containerwherex and gamma-ray systems are "blind" due to the high averageatomic number of the objects i"adiated that appear asblack spots in the radiographic image.The systems being developed are based on the use of fast, 14Me V, neutrons with detection of associated a-particle from nuclearreactionbywhichneutrons are produced (d+t>a+n.Jnsuch a way the possibility to

On the development of the new harmonised damage stability regulations for dry cargo and passenger ships

International Nuclear Information System (INIS)

Papanikolaou, Apostolos; Eliopoulou, Eleftheria

2008-01-01

This paper outlines the methodological background and presents a summary of the main results of a series of undertaken international, IMO-led studies, on the harmonisation of the new probabilistic, risk-based regulations with the currently in-force regulatory provisions for assessing the damage stability of dry cargo and passenger ships. It reviews the historical development of the new regulations, to be applied to all new buildings on January 1, 2009, and the anticipated impact of the new rules on the design and indirect operation of various subcategories of dry cargo and passenger ships. It identifies certain loopholes in the existing regulations that appear cured by the new ones, though certain compromises adopted in the development of the new regulations, particularly those related to large passenger ships' survivability, have left some open issues to be addressed in the near future

Hydroelastic response of 19,000 TEU class ultra large container ship with novel mobile deckhouse for maximizing cargo capacity

Directory of Open Access Journals (Sweden)

Hong-Il Im

2017-05-01

Full Text Available This paper is related to structural design evaluation of 19,000 TEU ultra large container ship, dealing with hydroelastic response, i.e. springing and whipping. It illustrates application of direct calculation tools and methodologies to both fatigue and ultimate strength assessment, simultaneously taking into account ship motions and her elastic deformations. Methodology for springing and whipping assessment within so called WhiSp notation is elaborated in details, and in order to evaluate innovative container ship design with increased loading capacity, a series of independent hydroelastic computations for container ship with mobile deckhouse and conventional one are performed with the same calculation setup. Fully coupled 3D FEM – 3D BEM model is applied, while the ultimate bending capacity of hull girder is determined by means of MARS software. Beside comparative analysis of representative quantities for considered ships, relative influence of hydroelasticity on ship response is addressed.

Determinants of Operational Efficiency at Chemical Cargo Terminals

Directory of Open Access Journals (Sweden)

T.A. Gúlcan

2014-06-01

Full Text Available In today’s globalized world, one of the requirements of global supply chains is efficient transportation systems. Approximately 80 per cent of world merchandise trade carried by sea and handled by ports worldwide. For this reason, maritime transport has the strategic economic importance. Loading of oil and gas has the biggest share (%30 in commodities carried by sea and 2.9 billion tons oil and gas loaded to ship in 2013. This study is focus on chemical cargo terminals which is a special terminal form where high and international levels of safety and quality elements applied. Unlike conventional bulk cargo and container cargo operations, chemical cargo operations include own priorities, applications, and the evaluation criteria. The aim of this study is to perform a qualitative research to determine the factors affecting the operational efficiency of ship, berth and warehousing operations in chemical cargo terminals.

27 CFR 44.187 - Shipping containers.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Shipping containers. 44... Shipping containers. Each shipping case, crate, or other container in which tobacco products, or cigarette... same containers in which they were received from the factory. (72 Stat. 1418, as amended; 26 U.S.C...

46 CFR 154.235 - Cargo tank location.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo tank location. 154.235 Section 154.235 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS... Survival Capability and Cargo Tank Location § 154.235 Cargo tank location. (a) For type IG hulls, cargo...

46 CFR 153.440 - Cargo temperature sensors.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo temperature sensors. 153.440 Section 153.440 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS... Temperature Control Systems § 153.440 Cargo temperature sensors. (a) Except as prescribed in paragraph (c) of...

A matheuristic for the liner shipping network design problem

DEFF Research Database (Denmark)

Brouer, Berit Dangaard; Desaulniers, Guy; Pisinger, David

We present a matheuristic, an integer programming based heuristic, for the liner shipping network design problem. This problem consists of finding a set of container shipping routes defining a capacitated network for cargo transport. The objective is to maximize the revenue of cargo transport...... the available fleet of container vessels. The cargo transports make extensive use of transshipments between routes and the number of transshipments of the cargo flow is decisive for network profitability. Computational results are reported for the benchmark suite LINER-LIB 2012 following the industry standard...... of weekly departures on every schedule. The heuristic shows overall good performance and is able to find high quality solutions within competitive execution times. The matheuristic can also be applied as a decision support tool to improve an existing network by optimizing on a designated subset...

27 CFR 44.254 - Shipping containers.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Shipping containers. 44.254 Section 44.254 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Requirements § 44.254 Shipping containers. Each shipping case, crate, or other container, in which cigars are...

Screening Cargo Containers to Remove a Terrorist Threat

International Nuclear Information System (INIS)

Hazi, A

2005-01-01

Each year some 48 million cargo containers move between the world's ports. More than 6 million of these enter the U.S., but only about 2 percent are opened and inspected when they arrive at U.S. seaports. The West Coast ports of Los Angeles-Long Beach, Oakland, and Seattle alone process 11,000 containers per day, or about 8 containers per minute. Because of this high traffic volume, U.S. seaports are especially vulnerable to a terrorist attack. Illicit radioactive materials could be hidden in any one of the cargo-filled containers that arrive at U.S. ports. Yet, searching every shipment would be bring legitimate commercial activities to a halt. Improving security at U.S. ports is thus one of the nation's most difficult technical and practical challenges because the systems developed for screening cargo must operate in concert with ongoing seaport activities. Working at this intersection of commerce and national security, Lawrence Livermore researchers are applying their expertise in radiation science and detection to develop improved technologies for detecting hidden radioactive materials. One new technology being designed and tested at the Laboratory is a neutron interrogation system for cargo containers. This system will quickly screen incoming shipments to ensure that nuclear materials such as plutonium and highly enriched uranium (HEU) are not smuggled into the U.S

International liner cargo shipping: a review of Part X of the Trade Practices Act 1974

OpenAIRE

Productivity Commission

2001-01-01

On 12 March 1999 the Assistant Treasurer referred Part X of the Trade Practices Act 1974 and associated regulations to the Commission for inquiry and report within six months. The Commission was to report on the appropriate arrangements for regulation of international cargo shipping services.

International dissemination of epidemic Vibrio cholerae by cargo ship ballast and other nonpotable waters.

Science.gov (United States)

McCarthy, S A; Khambaty, F M

1994-07-01

In 1991 and 1992, toxigenic Vibrio cholerae O1, serotype Inaba, biotype El Tor, was recovered from nonpotable (ballast, bilge, and sewage) water from five cargo ships docked in ports of the U.S. Gulf of Mexico. Four of these ships had taken on ballast water in cholera-infected countries; the fifth took on ballast in a noninfected country. Isolates examined by pulsed-field gel electrophoresis were indistinguishable from the Latin American epidemic strain, C6707; however, they differed significantly from the endemic Gulf Coast strain (VRL 1984), the sixth-pandemic strain (569-B), and a V. cholerae non-O1 strain isolated from a ship arriving from a foreign port. On the basis of our findings, the Food and Drug Administration recommended that the U.S. Coast Guard issue an advisory to shipping agents and captains requesting that ballast waters be exchanged on the high seas before entry of ships into U.S. ports.

46 CFR 98.30-11 - Cargo pumps.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo pumps. 98.30-11 Section 98.30-11 Shipping COAST..., ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK Portable Tanks § 98.30-11 Cargo pumps. No person may operate a cargo pump to transfer a product to or from a portable tank unless the pump...

The effect of cargo on the crush loading of RAM transportation packages in ship collisions

International Nuclear Information System (INIS)

Radloff, H.D.; Ammerman, D.J.

1998-03-01

Recent intercontinental radioactive material shipping campaigns have focused public and regulatory attention on the safety of transport of this material by ocean-going vessels. One major concern is the response of the vessel and onboard radioactive material (RAM) packages during a severe ship-to-ship collision. These collisions occur at velocities less than the velocity obtained in the Type B package regulatory impact event and the bow of the striking ship is less rigid than the unyielding target used in those tests (Ammerman and Daidola, 1996). This implies that ship impact is not a credible scenario for damaging the radioactive material packages during ship collisions. It is possible, however, for these collisions to generate significant amounts of crush force by the bow of the impacting ship overrunning the package. It is the aim of this paper to determine an upper bound on the magnitude of this crush force taking into account the strength of the radioactive material carrying vessel and any other cargo that may be stowed in the same hold as the radioactive material

Indications of marine bioinvasion from network theory. An analysis of the global cargo ship network

NARCIS (Netherlands)

Kölzsch, A.; Blasius, B.

2011-01-01

The transport of huge amounts of small aquatic organisms in the ballast tanks and at the hull of large cargo ships leads to ever increasing rates of marine bioinvasion. In this study, we apply a network theoretic approach to examine the introduction of invasive species into new ports by global

Cargo container inspection test program at ARPA's Nonintrusive Inspection Technology Testbed

Science.gov (United States)

Volberding, Roy W.; Khan, Siraj M.

1994-10-01

An x-ray-based cargo inspection system test program is being conducted at the Advanced Research Project Agency (ARPA)-sponsored Nonintrusive Inspection Technology Testbed (NITT) located in the Port of Tacoma, Washington. The test program seeks to determine the performance that can be expected from a dual, high-energy x-ray cargo inspection system when inspecting ISO cargo containers. This paper describes an intensive, three-month, system test involving two independent test groups, one representing the criminal smuggling element and the other representing the law enforcement community. The first group, the `Red Team', prepares ISO containers for inspection at an off-site facility. An algorithm randomly selects and indicates the positions and preparation of cargoes within a container. The prepared container is dispatched to the NITT for inspection by the `Blue Team'. After in-gate processing, it is queued for examination. The Blue Team inspects the container and decides whether or not to pass the container. The shipment undergoes out-gate processing and returns to the Red Team. The results of the inspection are recorded for subsequent analysis. The test process, including its governing protocol, the cargoes, container preparation, the examination and results available at the time of submission are presented.

46 CFR 154.562 - Cargo hose: Hydrostatic test.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo hose: Hydrostatic test. 154.562 Section 154.562 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Hose § 154.562 Cargo hose: Hydrostatic test. Each cargo hose must pass a hydrostatic pressure test at...

Wind Forces on Container Ships

DEFF Research Database (Denmark)

Andersen, Ingrid Marie Vincent

2012-01-01

An investigation of the wind forces acting on a 9,000+ TEU container ship has been carried out through a series of wind tunnel tests. It was investigated how the wind forces depend on the container configuration on the deck using a 1:450 scale model and a series of appropriate container...... are presented as nondimensional coefficients. It is concluded, that the measured forces and moment depend on the container configuration on deck, and the results may provide a general idea of how the magnitude of the wind forces is affected by a given container stacking configuration on a similar container ship....

Optimization in liner shipping

DEFF Research Database (Denmark)

Brouer, Berit Dangaard; Karsten, Christian Vad; Pisinger, David

2017-01-01

Seaborne trade is the lynchpin in almost every international supply chain, and about 90% of non-bulk cargo worldwide is transported by container. In this survey we give an overview of data-driven optimization problems in liner shipping. Research in liner shipping is motivated by a need for handling...... still more complex decision problems, based on big data sets and going across several organizational entities. Moreover, liner shipping optimization problems are pushing the limits of optimization methods, creating a new breeding ground for advanced modelling and solution methods. Starting from liner...... shipping network design, we consider the problem of container routing and speed optimization. Next, we consider empty container repositioning and stowage planning as well as disruption management. In addition, the problem of bunker purchasing is considered in depth. In each section we give a clear problem...

46 CFR 154.1816 - Cargo location plan.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo location plan. 154.1816 Section 154.1816 Shipping... FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Operations § 154.1816 Cargo location plan. The master shall ensure that: (a) A cargo location plan is prepared that gives: (1) The location and...

Dual Neutral Particle Beam Interrogation of Intermodal Shipping Containers for Special Nuclear Material

Science.gov (United States)

Keith, Rodney Lyman

Intermodal shipping containers entering the United States provide an avenue to smuggle unsecured or stolen special nuclear material (SNM). The only direct method fielded to indicate the presence of SNM is by passive photon/neutron radiation detection. Active interrogation using neutral particle beams to induce fission in SNM is a method under consideration. One by-product of fission is the creation of fragments that undergo radioactive decay over a time period on the order of tens of seconds after the initial event. The "delayed" gamma-rays emitted from these fragments over this period are considered a hallmark for the presence of SNM. A fundamental model is developed using homogenized cargos with a SNM target embedded at the center and computationally interrogated using simultaneous neutron and photon beams. Findings from analysis of the delayed gamma emissions from these experiments are intended to mitigate the effects of poor quality information about the composition and disposition of suspect cargo before examination in an active interrogation portal.

46 CFR 154.195 - Aluminum cargo tank: Steel enclosure.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Aluminum cargo tank: Steel enclosure. 154.195 Section... Equipment Hull Structure § 154.195 Aluminum cargo tank: Steel enclosure. (a) An aluminum cargo tank and its... the aluminum cargo tank must meet the steel structural standards of the American Bureau of Shipping...

46 CFR 151.25-2 - Cargo handling space.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo handling space. 151.25-2 Section 151.25-2 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Environmental Control § 151.25-2 Cargo handling space. Pump rooms, compressor rooms, refrigeration rooms, heating rooms, instrument rooms or other closed spaces...

46 CFR 153.491 - Waiver of certain equipment for dedicated cargo tanks.

Science.gov (United States)

2010-10-01

... and endorses a ship's Certificate of Inspection or Certificate of Compliance allowing a cargo tank to carry a single, specific NLS cargo and no other cargo if the ship's owner— (1) Requests a waiver... DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design...

19 CFR 19.41 - Movement of containerized cargo to a container station.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Movement of containerized cargo to a container station. 19.41 Section 19.41 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND... THEREIN Container Stations § 19.41 Movement of containerized cargo to a container station. Containerized...

Cosmic-ray-induced ship-effect neutron measurements and implications for cargo scanning at borders

Energy Technology Data Exchange (ETDEWEB)

Kouzes, Richard T. [Pacific Northwest National Laboratory, MS K7-36, P.O. Box 999, Richland, WA 99352 (United States)], E-mail: richard.kouzes@pnl.gov; Ely, James H.; Seifert, Allen; Siciliano, Edward R.; Weier, Dennis R.; Windsor, Lindsay K.; Woodring, Mitchell L. [Pacific Northwest National Laboratory, MS K7-36, P.O. Box 999, Richland, WA 99352 (United States); Borgardt, James; Buckley, Elise; Flumerfelt, Eric; Oliveri, Anna; Salvitti, Matt [Juniata College Physics Department, 1700 Moore St., Huntingdon, PA 16652 (United States)

2008-03-11

Neutron measurements are used as part of the interdiction process for illicit nuclear materials at border crossings. Even though the natural neutron background is small, its variation can impact the sensitivity of detection systems. The natural background of neutrons that is observed in monitoring instruments arises almost entirely from cosmic-ray-induced cascades in the atmosphere and the surrounding environment. One significant source of variation in the observed neutron background is produced by the 'ship effect' in large quantities of cargo that transit past detection instruments. This paper reports on results from measurements with typical monitoring equipment of ship effect neutrons in various materials. One new result is the 'neutron shadow shielding' effect seen with some low neutron density materials.

Indirect estimation of radioactivity in containerized cargo

International Nuclear Information System (INIS)

Jarman, K.D.; Scherrer, C.; Smith, L.E.; Chilton, L.K.; Anderson, K.K.; Ressler, J.J.; Trease, L.L.

2011-01-01

Naturally occurring radioactive material in containerized cargo challenges the state of the art in national and international efforts to detect illicit nuclear and radiological material in transported containers. Current systems are being evaluated and new systems envisioned to provide the high probability of detection necessary to thwart potential threats, combined with extremely low nuisance and false alarm rates necessary to maintain the flow of commerce impacted by the enormous volume of commodities imported in shipping containers. Maintaining flow of commerce also means that inspection must be rapid, requiring relatively non-intrusive, indirect measurements of cargo from outside containers to the extent possible. With increasing information content in such measurements, it is natural to ask how the information might be combined to improve detection. Toward this end, we present an approach to estimating isotopic activity of naturally occurring radioactive material in cargo grouped by commodity type, combining container manifest data with radiography and gamma-ray spectroscopy aligned to location along the container. The heart of this approach is our statistical model of gamma-ray counts within peak regions of interest, which captures the effects of background suppression, counting noise, convolution of neighboring cargo contributions, and down-scattered photons to provide estimates of counts due to decay of specific radioisotopes in cargo alone. Coupled to that model, we use a mechanistic model of self-attenuated radiation flux to estimate the isotopic activity within cargo, segmented by location within each container, that produces those counts. We test our approach by applying it to a set of measurements taken at the Port of Seattle in 2006. This approach to synthesizing disparate available data streams and extraction of cargo characteristics, while relying on several simplifying assumptions and approximations, holds the potential to support improvement of

46 CFR 28.885 - Cargo gear.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo gear. 28.885 Section 28.885 Shipping COAST GUARD... Aleutian Trade Act Vessels § 28.885 Cargo gear. (a) The safe working load (SWL) for the assembled gear... the load the gear is approved to lift, excluding the weight of the gear itself. (b) All wire rope...

Lift-based up-ender and methods using same to manipulate a shipping container containing unirradiated nuclear fuel

Science.gov (United States)

Nilles, Michael J.

2017-08-01

A shipping container containing an unirradiated nuclear fuel assembly is lifted off the ground by operating a crane to raise a lifting tool comprising a winch. The lifting tool is connected with the shipping container by a rigging line connecting with the shipping container at a lifting point located on the shipping container between the top and bottom of the shipping container, and by winch cabling connecting with the shipping container at the top of the shipping container. The shipping container is reoriented by operating the winch to adjust the length of the winch cabling so as to rotate the shipping container about the lifting point. Shortening the winch cabling rotates the shipping container about the lifting point from a horizontal orientation to a vertical orientation, while lengthening the winch cabling rotates the shipping container about the lifting point from the vertical orientation to the horizontal orientation.

The Cargo

DEFF Research Database (Denmark)

Birch, Thomas; Charlton, Michael F.; Biggs, Lynn

2014-01-01

The Gresham ship was carrying a substantial cargo of different metals when she sank, representing a considerable financial loss. Reports record that some of that material recovered in 1846 included 2700 tin ingots, lead pigs and iron bars (British Archaeological Association, 1847, 361......). The excavations in 2003–4 found a further three stamped lead ingots, five tin ingots and 42 iron bars from the hull area of the ship. The size of the original cargo remains unknown, though the estimated capacity of the ship, perhaps some 150 tons, provides an indication. In this chapter, the assemblage of lead...... and tin ingots and the bar iron will be described, the production processes established and the innovative analytical evidence for the provenance of the metals discussed. The research presented here suggests that lead ingots were from Derbyshire, the tin from Cornwall, but the bar iron seems...

Cosmic Ray Background Analysis For A Cargo Container Counter

International Nuclear Information System (INIS)

Ensslin, Norbert; Geist, W.H.; Lestone, J.P.; Mayo, D.R.; Menlove, Howard O.

2001-01-01

We have developed a new model for calculating the expected yield of cosmic-ray spallation neutrons in a Cargo Container Counter, and we have benchmarked the model against measurements made with several existing large neutron counters. We also developed two versions of a new measurement uncertainty prediction code based on Microsoft Excel spreadsheets. The codes calculate the minimum detectability limit for the Cargo Container Counter for either neutron singles or doubles counting, and also propagate the uncertainties associated with efficiency normalization flux monitors and cosmic ray flux monitors. This paper will describe the physics basis for this analysis, and the results obtained for several different counter designs.

77 FR 6135 - Agency Information Collection Activities: Cargo Manifest/Declaration, Stow Plan, Container Status...

Science.gov (United States)

2012-02-07

... Activities: Cargo Manifest/ Declaration, Stow Plan, Container Status Messages and Importer Security Filing... the Paperwork Reduction Act: Cargo Manifest/Declaration, Stow Plan, Container Status Messages and.../Declaration, Stow Plan, Container Status Messages and Importer Security Filing. OMB Number: 1651-0001. Form...

Container cargo simulation modeling for measuring impacts of infrastructure investment projects in Pearl River Delta

Science.gov (United States)

Li, Jia-Qi; Shibasaki, Ryuichi; Li, Bo-Wei

2010-03-01

In the Pearl River Delta (PRD), there is severe competition between container ports, particularly those in Hong Kong, Shenzhen, and Guangzhou, for collecting international maritime container cargo. In addition, the second phase of the Nansha terminal in Guangzhou’s port and the first phase of the Da Chang Bay container terminal in Shenzhen opened last year. Under these circumstances, there is an increasing need to quantitatively measure the impact these infrastructure investments have on regional cargo flows. The analysis should include the effects of container terminal construction, berth deepening, and access road construction. The authors have been developing a model for international cargo simulation (MICS) which can simulate the movement of cargo. The volume of origin-destination (OD) container cargo in the East Asian region was used as an input, in order to evaluate the effects of international freight transportation policies. This paper focuses on the PRD area and, by incorporating a more detailed network, evaluates the impact of several infrastructure investment projects on freight movement.

Right of innocent passage of ships carrying ultra-hazardous cargoes

International Nuclear Information System (INIS)

Sousa Ferro, M.

2006-01-01

The analysis carried out in this paper suggests that coastal states would probably fail to persuade an international tribunal of the existence of the right to deny passage of ships carrying ultra-hazardous cargoes through their territorial seas, much less through their exclusive economic zones. The same applies to the obligation to provide (or right to require) prior notification of such passage. This may partly explain why no international litigation concerning these issues has so far taken place, even though there have been a number of conflicts between coastal states and shipping states, widely published in the media. Still, evidence suggests that officers at the head of authorities in several coastal states, often non legal experts, firmly believe in the existence of these rights and obligations, at least insofar as concerns the territorial sea; The gap between the law and practice seems to be widening. At the same time, several states are clearly pursuing a policy of pushing for an evolution of customary law, either by claiming that this evolution has already taken place, or that the letter of this or that treaty already allows for claims. It would not be surprising if this strategy should succeed eventually. For the time being, however, one must not be too hasty to confuse diplomatic concessions with an evolution of the law. (author)

Cargo-mix optimization in Liner Shipping

DEFF Research Database (Denmark)

Christensen, Jonas Mark; Pacino, Dario; Fonseca, Joao Filipe Paiva

International transportation constitutes one of the biggest challenges in limiting CO2 emission in theworld: it is technically hard to find viable alternatives to fossil fuels, and due to the internationalnature, it is very difficult to regulate CO2 emission of intercontinental trade. Moreover...... and have to find a load configuration (stowage plan)that both suits the current cargo to be loaded but also guarantees that the vessel can be utilizedto its maximum in future ports. The size of nowadays vessels is, however, making this work harderand harder (Pacino et al. (2011)). Moreover, the cargo...

BALTIC CONTAINER SHIPPING MARKET GOES GLOBAL

Directory of Open Access Journals (Sweden)

Ernest Czermański

2016-03-01

Full Text Available This paper aims at summarizing the last period of the Baltic container shipping mar-ket’s development, especially after 2000. The author, taking especially into account changes that have occurred in 2010, ultimately demonstrate that through the analyzed changes, this market has become a global one - thus being shaped by global determinants influencing its further development. Author selected and analyzed some chosen, most important factors influencing future market development. Secondly, some chances and threats resulting from the described changes were presented, either for the entire market as a base for international trade of Baltic Sea Region countries, and for its actors, mainly shipping owners and operators acting as a supply side of the Baltic container market. Finally, author has tried to verify and questioned the doubts and strong concerns about the future of the Baltic container shipping, especially about the feeder services, as because there are real indications and arguments against these concern.

Containment of spills from ships

International Nuclear Information System (INIS)

Engerer, M.J.

1992-01-01

Oil escaping from a ship is contained within a limited area surrounding the ship by means of a flexible ring structure. The ring structure is stored in a collapsed state in a compartment extending around the ship. In response to an oil spill, the ring structure is dropped from the compartment and immediately surrounds the ship. A circular inflatable flotation section of the ring structure is charged with gas under pressure. The gas is supplied from a bottle cascade aboard the ship, through lines preconnected to the flotation section and paid out from free-wheeling reels. The flotation section supports a thin circumferential wall of predetermined height that submerges and assumes a vertical cylinder-like shape surrounding the escaping oil. The oil floats within the confines of the ring structure, and the ring structure is progressively expanded to a predetermined size selected to accommodate the total volume of oil carried by the ship. When the ring structure achieves its expanded state, pressure in the flotation section is raised to render the structure relatively rigid and resistant to collapse in response to wave action. Oil can be removed from the interior of the ring structure by recovery ships using suction lines or other conventional recovery methods. 12 figs

Technical and management considerations in conducting type B shipping container tests

International Nuclear Information System (INIS)

Whitney, M.A.; Leader, D.R.; Phipps, D.P.

1994-01-01

The Code of Federal Regulations (CFR) mandate that type B shipping containers are capable of surviving specific drop tests. One approach for demonstrating compliance to the CFRs is to drop test a shipping container. This paper will discuss the technical and management considerations in conducting such drop tests on the 9975 family of shipping containers. For both technical and management considerations this paper will comment on loading the shipping container, dropping the shopping container, and examination of the shipping container after the drop tests

Nuclear waste shipping container response to severe accident conditions, A brief critique of the modal study

International Nuclear Information System (INIS)

Audin, L.

1990-12-01

The Modal Study (NUREG/CR-4829) attempts to upgrade the analysis of spent nuclear fuel transportation accidents, and to verify the validity of the present regulatory scheme of cask performance standards as a means to minimize risk. While an improvement over many prior efforts in this area (such as NUREG-0170), it unfortunately fails to create a realistic simulation either of a shipping cask, the severe conditions to which it could be subjected, or the potential damage to the spent fuel cargo during an accident. There are too many deficiencies in its analysis to allow acceptance of its results for the presumed cask design, and many pending changes in new containers, cargoes and shipping patterns will limit applicability of the Modal Study to future shipments. In essence, the Modal Study is a good start, but is too simplistic, incomplete, outdated and open to serious question to be used as the basis for any present-day environmental or risk assessment of spent fuel transportation. It needs to be redone, with peer review during its production and experimental verification of its assumptions, before it has any relevance to the shipments planned to Yucca Mountain. Finally, it must be expanded into a full risk assessment by inputing its radiological release fractions and probabilities into a valid dispersal simulation to properly determine the impact of its results. 51 refs

46 CFR 153.1000 - Special operating requirements for cargoes reactive with water.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Special operating requirements for cargoes reactive with water. 153.1000 Section 153.1000 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED... MATERIALS Operations Special Cargo Procedures § 153.1000 Special operating requirements for cargoes reactive...

Final Report, Next-Generation Mega-Voltage Cargo-Imaging System for Cargo Container Inspection, March 2007

International Nuclear Information System (INIS)

Dr. James Clayton, Ph.D., Varian Medical Systems-Security and Inspection Products; Dr. Emma Regentova, Ph.D, University of Nevada Las Vegas; Dr. Evangelos Yfantis, Ph.D., University of Nevada, Las Vegas

2007-01-01

The UNLV Research Foundation, as the primary award recipient, teamed with Varian Medical Systems-Security and Inspection Products and the University of Nevada Las Vegas (UNLV) for the purpose of conducting research and engineering related to a ''next-generation'' mega-voltage imaging (MVCI) system for inspection of cargo in large containers. The procurement and build-out of hardware for the MVCI project has been completed. The K-9 linear accelerator and an optimized X-ray detection system capable of efficiently detecting X-rays emitted from the accelerator after they have passed through the device is under test. The Office of Science financial assistance award has made possible the development of a system utilizing a technology which will have a profound positive impact on the security of U.S. seaports. The proposed project will ultimately result in critical research and development advances for the ''next-generation'' Linatron X-ray accelerator technology, thereby providing a safe, reliable and efficient fixed and mobile cargo inspection system, which will very significantly increase the fraction of cargo containers undergoing reliable inspection as the enter U.S. ports. Both NNSA/NA-22 and the Department of Homeland Security's Domestic Nuclear Detection Office are collaborating with UNLV and its team to make this technology available as soon as possible

Photonuclear-based Detection of Nuclear Smuggling in Cargo Containers

Science.gov (United States)

Jones, J. L.; Haskell, K. J.; Hoggan, J. M.; Norman, D. R.; Yoon, W. Y.

2003-08-01

The Idaho National Engineering and Environmental Laboratory (INEEL) and the Los Alamos National Laboratory (LANL) have performed experiments in La Honda, California and at the Idaho Accelerator Center in Pocatello, Idaho to assess and develop a photonuclear-based detection system for shielded nuclear materials in cargo containers. The detection system, measuring photonuclear-related neutron emissions, is planned for integration with the ARACOR Eagle Cargo Container Inspection System (Sunnyvale, CA). The Eagle Inspection system uses a nominal 6-MeV electron accelerator and operates with safe radiation exposure limits to both container stowaways and to its operators. The INEEL has fabricated custom-built, helium-3-based, neutron detectors for this inspection application and is performing an experimental application assessment. Because the Eagle Inspection system could not be moved to LANL where special nuclear material was available, the response of the Eagle had to be determined indirectly so as to support the development and testing of the detection system. Experiments in California have successfully matched the delayed neutron emission performance of the ARACOR Eagle with that of the transportable INEEL electron accelerator (i.e., the Varitron) and are reported here. A demonstration test is planned at LANL using the Varitron and shielded special nuclear materials within a cargo container. Detector results are providing very useful information regarding the challenges of delayed neutron counting near the photofission threshold energy of 5.5 - 6.0 MeV, are identifying the possible utilization of prompt neutron emissions to allow enhanced signal-to-noise measurements, and are showing the overall benefits of using higher electron beam energies.

Scanning Cargo Containers with Tagged Neutrons

International Nuclear Information System (INIS)

Viesti, G.; Botosso, C.; Fabris, D.; Lunardon, M.; Moretto, S.; Nebbia, G.; Pesente, S.; Zenoni, A.; Donzella, A.; Perot, B.; Carasco, C.; Bernard, S.; Mariani, A.; Szabo, J.-L.; Sannie, G.; Valkovic, V.; Sudac, D.; Nad, K.; Peerani, P.; Sequeira, V.

2007-01-01

A new Tagged Neutron Inspection System (TNIS) able to detect illicit materials such as explosives and narcotics in cargo containers has been developed within the EURopean Illicit TRAfficing Countermeasures Kit (EURITRACK) project. After the R and D phase, the inspection portal has been installed and commissioned at the Rijeka seaport in Croatia, where it has been operated in connection with the existing X-ray scanner for a first two-month demonstration campaign. Results obtained are presented and discussed in this paper

Overview of Crane Control Systems and the Related Problems: Analysis of Container Oscillation Using Different Types of Cargoes

Directory of Open Access Journals (Sweden)

Tomas Eglynas

2016-04-01

Full Text Available Growing international trading increased cargo transportation in containers, therefore the port cranes have higher loads. Increased cargo flows can influence transportation safety. It is therefore necessary to review the crane systems and determine what factors might influence the volatility of the container and its cargo during transportation. The paper includes consideration and analysis of crane control systems and related problems. The authors consider the reasons of problems, probable damage and solution methods. The paper also provides the analysis of the relationship between different container cargoes and container oscillations occurring during handling operations using a container crane prototype. The analysis of the effect of different cargoes in containers on loading process and the results of occurring oscillations are presented.

76 FR 51367 - China Shipping Container Lines Co., Ltd.; COSCO Container Lines Company Limited; Evergreen Line A...

Science.gov (United States)

2011-08-18

... FEDERAL MARITIME COMMISSION [Docket No. 11-12] China Shipping Container Lines Co., Ltd.; COSCO Container Lines Company Limited; Evergreen Line A Joint Service Agreement; Hanjin Shipping Co., Ltd... Maritime Commission (Commission) by China Shipping Container Lines Co., Ltd.; COSCO Container Lines Company...

Utilization of nuclear technology to ship

International Nuclear Information System (INIS)

Kim, H. C.

2004-01-01

The SMART, a medium sized power plant with an output of 330mwth, can be used on barges to generate electric power and water, and can be used to propel container ships. For high speed, to secure the container cargo, and huge container carriers, to lower the operating expenses, the use of nuclear power reactor is essential. To compete in this challenging area with the advanced countries, a well-orchestrated joint effort will be necessary by the government and the industries

Standardized analyses of nuclear shipping containers

International Nuclear Information System (INIS)

Parks, C.V.; Hermann, O.W.; Petrie, L.M.; Hoffman, T.J.; Tang, J.S.; Landers, N.F.; Turner, W.D.

1983-01-01

This paper describes improved capabilities for analyses of nuclear fuel shipping containers within SCALE -- a modular code system for Standardized Computer Analyses for Licensing Evaluation. Criticality analysis improvements include the new KENO V, a code which contains an enhanced geometry package and a new control module which uses KENO V and allows a criticality search on optimum pitch (maximum k-effective) to be performed. The SAS2 sequence is a new shielding analysis module which couples fuel burnup, source term generation, and radial cask shielding. The SAS5 shielding sequence allows a multidimensional Monte Carlo analysis of a shipping cask with code generated biasing of the particle histories. The thermal analysis sequence (HTAS1) provides an easy-to-use tool for evaluating a shipping cask response to the accident capability of the SCALE system to provide the cask designer or evaluator with a computational system that provides the automated procedures and easy-to-understand input that leads to standarization

46 CFR 308.545 - Facultative cargo policy, Form MA-316.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Facultative cargo policy, Form MA-316. 308.545 Section 308.545 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK... policy, Form MA-316. The standard form of War Risk Facultative Cargo Policy, Form MA-316, may be obtained...

Extension of ship accident analysis to multiple-package shipments

International Nuclear Information System (INIS)

Mills, G.S.; Neuhauser, K.S.

1997-11-01

Severe ship accidents and the probability of radioactive material release from spent reactor fuel casks were investigated previously. Other forms of RAM, e.g., plutonium oxide powder, may be shipped in large numbers of packagings rather than in one to a few casks. These smaller, more numerous packagings are typically placed in ISO containers for ease of handling, and several ISO containers may be placed in one of several holds of a cargo ship. In such cases, the size of a radioactive release resulting from a severe collision with another ship is determined not by the likelihood of compromising a single, robust package but by the probability that a certain fraction of 10's or 100's of individual packagings is compromised. The previous analysis involved a statistical estimation of the frequency of accidents which would result in damage to a cask located in one of seven cargo holds in a collision with another ship. The results were obtained in the form of probabilities (frequencies) of accidents of increasing severity and of release fractions for each level of severity. This paper describes an extension of the same general method in which the multiple packages are assumed to be compacted by an intruding ship's bow until there is no free space in the hold. At such a point, the remaining energy of the colliding ship is assumed to be dissipated by progressively crushing the RAM packagings and the probability of a particular fraction of package failures is estimated by adaptation of the statistical method used previously. The parameters of a common, well characterized packaging, the 6M with 2R inner containment vessel, were employed as an illustrative example of this analysis method. However, the method is readily applicable to other packagings for which crush strengths have been measured or can be estimated with satisfactory confidence

Extension of ship accident analysis to multiple-package shipments

International Nuclear Information System (INIS)

Mills, G.S.; Neuhauser, K.S.

1998-01-01

Severe ship accidents and the probability of radioactive material release from spent reactor fuel casks were investigated previously (Spring, 1995). Other forms of RAM, e.g., plutonium oxide powder, may be shipped in large numbers of packagings rather than in one to a few casks. These smaller, more numerous packagings are typically placed in ISO containers for ease of handling, and several ISO containers may be placed in one of several holds of a cargo ship. In such cases, the size of a radioactive release resulting from a severe collision with another ship is determined not by the likelihood of compromising a single, robust package but by the probability that a certain fraction of 10's or 100's of individual packagings is compromised. The previous analysis (Spring, 1995) involved a statistical estimation of the frequency of accidents which would result in damage to a cask located in one of seven cargo holds in a collision with another ship. The results were obtained in the form of probabilities (frequencies) of accidents of increasing severity and of release fractions for each level of severity. This paper describes an extension of the same general method in which the multiple packages are assumed to be compacted by an intruding ship's bow until there is no free space in the hold. At such a point, the remaining energy of the colliding ship is assumed to be dissipated by progressively crushing the RAM packagings and the probability of a particular fraction of package failures is estimated by adaptation of the statistical method used previously. The parameters of a common, well-characterized packaging, the 6M with 2R inner containment vessel, were employed as an illustrative example of this analysis method. However, the method is readily applicable to other packagings for which crush strengths have been measured or can be estimated with satisfactory confidence. (authors)

Tracking 800-year-old Shipments: An Archaeological Investigation of the Mado Shipwreck Cargo, Taean, Korea

Science.gov (United States)

Kim, Minkoo; Moon, Whan Suk

2011-12-01

This paper examines cargo from an 800-year-old shipwreck and discusses its implications in relation to the exchange networks and maritime transportation of the Goryeo period (A.D. 918-1392) in Korea. In 2007, two local fishermen fortuitously discovered porcelain vessels from a Goryeo-period shipwreck off the mid-western coast of the Korean peninsula. Underwater excavation conducted by the National Research Institute of Maritime Cultural Heritage (NRIMCH) revealed that the ship was carrying a myriad of cargoes destined for Gaegyeong, the capital of the Goryeo dynasty. Excavation indicates that the main body of the cargo was porcelain vessels produced in the southern part of the peninsula. Archaeobotanical investigation of the wreck deposits revealed that the ship was carrying crops such as rice ( Oryza sativa L.), broomcorn millet ( Panicum miliaceum L.), foxtail millet ( Setaria italica (L.) P. Beauv.), and buckwheat ( Fagopyrum esculentum Moench) bound for the capital. Among the recovered objects were 73 wooden cargo tags with Chinese letters. These tags, equivalent to the modern day air bill, contained detailed information about the senders, recipients, and shipped goods. These findings indicate that during the Goryeo period maritime transportation played an important role in the interpersonal exchange of products over long distances.

46 CFR 154.1814 - Cargo information cards.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo information cards. 154.1814 Section 154.1814... cards. (a) No person may operate a vessel unless a cargo information card for each cargo being... accessible to the person in charge of the watch. (b) When a vessel is moored at a terminal, the master shall...

Empty Container Logistics

OpenAIRE

Jakov Karmelić; Čedomir Dundović; Ines Kolanović

2012-01-01

Within the whole world container traffic, the largest share of containers is in the status of repositioning. Container repositioning results from the need for harmonization between the point of empty container accumulation and the point of demand, and waiting time for the availability of the first next transport of cargo. This status of containers on the container market is the consequence of imbalances in the worldwide trade distribution on most important shipping routes. The need for fast a...

Network Design for Container Shipping Using Cutting Planes

DEFF Research Database (Denmark)

The network design problem in container shipping is of increasing importance in the strongly competitive markets where potential cost reductions are of the utmost importance. We combine the network design and fleet assignment problem into a mixed integer linear programming model minimizing the ov...... the fact that the route of a ship allows for subtours, we introduce the concept of pseudo-simple routes. To solve the problem we use a branch and cut solution method using clover and capacity cuts we defined for the problem.......The network design problem in container shipping is of increasing importance in the strongly competitive markets where potential cost reductions are of the utmost importance. We combine the network design and fleet assignment problem into a mixed integer linear programming model minimizing...... the overall cost. The real-life container shipping network design problem differs in several ways from the standard network design problem. Examples of these differences are the cyclic routes of vessels and the fact that a route is continuously sailed for a given forecast period. To model these real...

SURVEYING, MODELING AND 3D REPRESENTATION OF A WRECK FOR DIVING PURPOSES: CARGO SHIP “VERA”

OpenAIRE

Ktistis, A.; Tokmakidis, P.; Papadimitriou, K.

2017-01-01

This paper presents the results from an underwater recording of the stern part of a contemporary cargo-ship wreck. The aim of this survey was to create 3D representations of this wreck mainly for recreational diving purposes. The key points of this paper are: a) the implementation of the underwater recording at a diving site; b) the reconstruction of a 3d model from data that have been captured by recreational divers; and c) the development of a set of products to be used by the general publi...

46 CFR 308.517 - Open Cargo Policy, Form MA-300.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Open Cargo Policy, Form MA-300. 308.517 Section 308.517... Risk Cargo Insurance Ii-Open Policy War Risk Cargo Insurance § 308.517 Open Cargo Policy, Form MA-300. The standard form of War Risk Open Cargo, Form MA-300, may be obtained from the American War Risk...

Assessment of shipping emissions on four ports of Portugal.

Science.gov (United States)

Nunes, R A O; Alvim-Ferraz, M C M; Martins, F G; Sousa, S I V

2017-12-01

In the last few years, ship emissions have attracted growing attention in the scientific community. The main reason is the constant increase of marine emissions over the last twenty years due to the intensification of port traffic. Thus, this study aimed to evaluate ship emissions (PM 10 , PM 2.5 , NO x , SO 2 , CO, CO 2 , N 2 O CH 4 , NMVOC, and HC) through the activity-based methodology in four of the main ports of Portugal (Leixões, Setúbal, Sines and Viana do Castelo) during 2013 and 2014. The analysis was performed according to ship types (bulk carrier, container, general cargo, passenger, Ro-Ro cargo, tanker and others) and operational modes (manoeuvring, hotelling and during cruising). Results indicated that tankers were the largest emitters in two of the four analysed ports. Regarding cruising emissions, container ships were the largest emitters. . CO 2 , NO x and SO 2 estimated emissions represented more than 95% of the cruising and in-port emissions. Results were also compared with the total national emissions reported by the Portuguese Environment Agency, and if the in-port emissions estimated in the present study would have been taken into account to these totals, emissions of NO x and SO 2 would increase 15% and 24% in 2013 and 16% and 28% in 2014. Summing up ships seem to be an important source of air pollution, mainly regarding NO x and SO 2 . Copyright © 2017 Elsevier Ltd. All rights reserved.

9 CFR 83.7 - Shipping containers; cleaning and disinfection.

Science.gov (United States)

2010-01-01

... HEMORRHAGIC SEPTICEMIA § 83.7 Shipping containers; cleaning and disinfection. (a) All live fish that are to be... been cleaned and disinfected. (1) Cleaning and disinfection of shipping containers must be monitored by... who issues the ICI. (2) Cleaning and disinfection must be sufficient to neutralize any VHS virus to...

Detection of Special Nuclear Material in Cargo Containers Using Neutron Interrogation

International Nuclear Information System (INIS)

Slaughter, D.; Accatino, M.; Bernstein, A.; Candy, J.; Dougan, A.; Hall, J.; Loshak, A.; Manatt, D.; Meyer, A.; Pohl, B.; Prussin, S.; Walling, R.; Weirup, D.

2003-01-01

The goal of the work reported here is to develop a concept for an active neutron interrogation system that can detect small targets of SNM contraband in cargo containers, roughly 5 kg HEU or 1 kg Pu, even when well shielded by a thick cargo. It is essential that the concept be reliable and have low false-positive and false-negative error rates. It also must be rapid to avoid interruption of commerce, completing the analysis in minutes. A new radiation signature unique to SNM has been identified that utilizes high-energy (E γ = 3-7 MeV) fission product γ-ray emission. Fortunately, this high-energy γ-ray signature is robust in that it is very distinct compared to normal background radiation where there is no comparable high-energy γ-ray radiation. Equally important, it has a factor of 10 higher yield than delayed neutrons that are the basis of classical interrogation technique normally used on small unshielded specimens of SNM. And it readily penetrates two meters of low-Z and high-Z cargo at the expected density of ∼ 0.5 gm/cm 3 . Consequently, we expect that in most cases the signature flux at the container wall is at least 2-3 decades more intense than delayed neutron signals used historically and facilitates the detection of SNM even when shielded by thick cargo. Experiments have verified this signature and its predicted characteristics. However, they revealed an important interference due to the activation of 16 O by the 16 O(n,p) 16 N reaction that produces a 6 MeV γ-ray following a 7-sec β-decay of the 16 N. This interference is important when irradiating with 14 MeV neutrons but is eliminated when lower energy neutron sources are utilized since the reaction threshold for 16 O(n,p) 16 N is 10 MeV. The signature γ-ray fluxes exiting a thick cargo can be detected in large arrays of scintillation detectors to produce useful signal count rates of 2-4 x 10 4 cps. That is high enough to quickly identify SNM fission by its characteristic high energy �

Levels of Internationalization in the Container Shipping Industry

DEFF Research Database (Denmark)

Gadhia, Hitesh Kumar; Kotzab, Herbert; Prockl, Günter

2011-01-01

This paper examines the internationalization level of the world’s largest container shipping companies by examining their port networks. The results of our analysis show that only three of the nineteen companies could be considered as being truly ‘International’ and service the ‘lion’s share......’ of the major and minor ports distributed across the globe. The port networks of the other companies in our survey, whilst having individualized features, shared common characteristics. Guided by the ‘Uppsala Model of Incremental Internationalization’ (Johanson and Vahlne, 1977), we were able to identify four...... internationalization levels of a container shipping company that are indicated by their port network. We argue that the port network plays an additional role as it contributes to the internationalization level of the container shipping companies. This is important because the internationalization level affects...

Routing and Scheduling in Tramp Shipping - Integrating Bunker Optimization

DEFF Research Database (Denmark)

Vilhelmsen, Charlotte; Lusby, Richard Martin; Larsen, Jesper

A tramp ship operator typically has some contracted cargoes that must be carried and seeks to maximize proFIt by carrying optional cargoes. Hence, tramp ships operate much like taxies following available cargoes and not according to a fixed route network and itinerary as liner ships. Marine fuel....... We devise a solution method based on column generation with a dynamic programming algorithm to generate columns. The method is heuristic mainly due to a discretization of the continuous bunker purchase variables. We show that the integrated planning approach can increase profits and that the decision...

Routing and Scheduling in Tramp Shipping - Integrating Bunker Optimization

DEFF Research Database (Denmark)

Vilhelmsen, Charlotte; Lusby, Richard Martin; Larsen, Jesper

A tramp ship operator typically has some contracted cargoes that must be carried and seeks to maximize pro_t by carrying optional cargoes. Hence, tramp ships operate much like taxies following available cargoes and not according to a _xed route network and itinerary as liner ships. Marine fuel...... and bunker consumption. We devise a solution method based on column generation with a dynamic programming algorithm to generate columns. The method is heuristic mainly due to a discretization of the continuous bunker purchase variables. We show that the integrated planning approach can increase pro...

46 CFR 153.436 - Heat transfer fluids: compatibility with cargo.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Heat transfer fluids: compatibility with cargo. 153.436... Equipment Cargo Temperature Control Systems § 153.436 Heat transfer fluids: compatibility with cargo. A heat transfer fluid separated from the cargo by only one wall (for example, the heat transfer fluid in a coil...

46 CFR 154.560 - Cargo hose: Prototype test.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo hose: Prototype test. 154.560 Section 154.560... Hose § 154.560 Cargo hose: Prototype test. (a) Each cargo hose must be of a type that passes a prototype test at a pressure of at least five times its maximum working pressure at or below the minimum...

Failure assessment techniques to ensure shipping container integrity

International Nuclear Information System (INIS)

McConnell, P.

1986-02-01

This report discusses several methodologies which may be used to ensure the structural integrity of containment systems to be used for the transport and storage of high-level radioactive substances. For economic reasons, shipping containers constructed of ferritic materials are being considered for manufacture by vendors in the US and Europe. Ferritic show an inherent transition from a ductile, high energy failure mode to a brittle, low energy fracture mode with decreasing temperature. Therefore, formal consideration of means by which to avoid unstable brittle fracture is necessary prior to the licensing of ferritic casks. It is suggested that failure of a shipping container wall be defined as occurring when a flaw extends through the outer wall of the containment system. Crack initiation which may lead to unstable brittle crack growth should therefore be prevented. It is suggested that a fundamental linear elastic fracture mechanics (lefm) approach be adopted on a case-by-case basis, applied perhaps by means of appropriate modifications to ASMA Section III or Section XI. A lefm analysis requires information concerning service temperatures, loading rates, flaw sizes, and applied stresses. Tentative judgments regarding these parameters for typical shipping containers have been made

Container for shipping dangerous material

International Nuclear Information System (INIS)

Blum, P.T.

1987-01-01

This container for shipping dangerous material is made by a cylindrical casing of austenitic stainless steel with rounded ends and walls of uniform thickness with welded joins, a tubular metal shock absorber fixed over each end of the casing, removable lugs fixed to the casing, optionally retainers for the material within the casing [fr

The contraction of container for shipping antibiotics and serum

International Nuclear Information System (INIS)

Santoso, Romi; Kadarusman; Krismawan

2003-01-01

The construction of container for shipping antibiotics and serum. The construction of container is an engineering process to solve problem in shipping of antibiotics and serum to their destinations, in the same time to preserve their quality, in order to be used by the local patients. Inner part of antibiotics containers is made of stainless-steel, guarded by a vacuum and its temperature is conditioned between -10,8 to -20,2 oC so it can preserve the antibiotics and serum up to several days

Early Detection of Parametric Roll Resonance on Container Ships

DEFF Research Database (Denmark)

Galeazzi, Roberto; Blanke, Mogens; Poulsen, Niels Kjølstad

2013-01-01

Parametric roll resonance on ships is a nonlinear phenomenon where waves encountered at twice the natural roll frequency can bring the vessel dynamics into a bifurcation mode and lead to extreme values of roll. Recent years have seen several incidents with dramatic damage to container vessels...... the ship's speed and course, to escape from the bifurcation condition. This paper proposes nonparametric methods to detect the onset of roll resonance and demonstrates their performance. Theoretical conditions for parametric resonance are revisited and are used to develop efficient methods to detect its...... on experimental data from model tests and on data from a container ship crossing the Atlantic during a storm....

Network Design Models for Container Shipping

DEFF Research Database (Denmark)

Reinhardt, Line Blander; Kallehauge, Brian; Nielsen, Anders Nørrelund

This paper presents a study of the network design problem in container shipping. The paper combines the network design and fleet assignment problem into a mixed integer linear programming model minimizing the overall cost. The major contributions of this paper is that the time of a vessel route...... is included in the calculation of the capacity and that a inhomogeneous fleet is modeled. The model also includes the cost of transshipment which is one of the major cost for the shipping companies. The concept of pseudo simple routes is introduced to expand the set of feasible routes. The linearization...

46 CFR 308.521 - Application for Open Cargo Policy, Form MA-301.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Application for Open Cargo Policy, Form MA-301. 308.521... RISK INSURANCE War Risk Cargo Insurance Ii-Open Policy War Risk Cargo Insurance § 308.521 Application for Open Cargo Policy, Form MA-301. The standard form of application for a War Risk Open Cargo Policy...

Contestability of Container Liner Shipping Market in Alliance Era

Directory of Open Access Journals (Sweden)

Enna Hirata

2017-03-01

Full Text Available A cross section panel model is applied to estimate the effect that the Herfindahl-Hirschman Index (HHI has on container freight rates for a sample of six major container liner shipping routes during 2009 to 2011. The estimated coefficient of HHI is non-positive and statistically insignificant, indicating that higher concentration level does not lead to high price and the container liner shipping market is contestable for the period under consideration. The suggestion that efficiency can be achieved without actual competition in a contestable market is highly significant for policy makers.

Wind loads on post-panamax container ship

DEFF Research Database (Denmark)

Andersen, Ingrid Marie Vincent

2013-01-01

An investigation of the influence of the container configuration on the deck of a 9000+ TEU container ship on wind forces has been carried out through a series of wind tunnel tests with a 1:450 scale model. An analysis of earlier studies was used to select a series of appropriate loading conditions...

Protecting against failure by brittle fracture in ferritic steel shipping containers

International Nuclear Information System (INIS)

Schwartz, M.W.; Langland, R.T.

1983-01-01

The possible use of ferritic steels for the containment structure of shipping casks has motivated the development of criteria for assuring the integrity of these casks under both normal and hypothetical accident conditions specified in Part 71 of the Code of Federal Regulations. The US Nuclear Regulatory Commission Regulation Guide 7.6 provides design criteria for preventing ductile failure steel shipping containers. The research described in this paper deals with criteria for preventing brittle fracture of ferritic steel shipping containers. Initially guidelines were developed for ferritic steel up to four inches thick (I). This was followed by an investigation of various criteria that might be used for monolithic thick walled casks greater than four inches thick (2). Three categories of safety are identified in the design of shipping containers. Category I, the highest level of safety, is appropriate for containment systems for spent nuclear fuel and high level waste transport packaging. In Category I, containers are designed to the highest level of safety and brittle fracture is essentially not possible. Categories II and III represent levels of safety commensurate with the consequences of release of lower levels of radioactivity. In these latter categories, consideration of factors contributing to brittle fracture, good engineering practice, and careful selection of material make brittle fracture unlikely under environmental conditions encountered during shipping. This paper will deal primarily with Category I containers. The guidelines for Category II and III containers are fully described elsewhere. 5 references, 10 figures, 3 tables

Nuclear-powered icebreaking container ship via the Northern Sea Route in its economical aspects

International Nuclear Information System (INIS)

Kondo, Koichi; Takamasa, Tomoji

1996-01-01

In recent years, major maritime nations such as Japan, Russia and Norway have been investigating the use of the Northern Sea Route (NSR) as a sea route between the Far East and Europe, linking the eastern and western parts of the Eurasian continent. In this study, as part of the examination of suitable merchant ships for the NSR, we make an economic comparison between diesel container ships taking the Suez Canal route and NSR nuclear-powered icebreaking container ship carrying the Marine Reactor X (MRX), which is currently being developed at the Japan Atomic Energy Research Institute. Compared to diesel container ships going via the Suez Canal, the first-year transportation cost of NSR nuclear-powered container ship after commissioning is 30-70% higher and the required freight rate (RFR) is 8-40% higher. If the nuclear reactor in nuclear-powered container ship, which is the reason for higher cost, were replaced by the cassette-type MRX, the reusability of the MRX would reduce this cost difference between nuclear-powered and diesel ships. The study also shows that in terms of the total cost including sales opportunity costs, NSR nuclear-powered container ship can compete sufficiently with diesel container ships on the Suez Canal route. (author)

46 CFR 151.45-7 - Shipping papers.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Shipping papers. 151.45-7 Section 151.45-7 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-7 Shipping papers. Each barge carrying... towing vessel shall either have a copy of the shipping papers for each barge in his tow or he shall make...

Refuses and delays in the transportation by ship of radioactive material

International Nuclear Information System (INIS)

Xavier, Clarice; Sobreira, Ana Celia

2011-01-01

Some Class 7 materials can only be transported by ship, making that load and unload activities can be done in a port. In the Brazil, the port of Santos posses the most volume of cargo manipulation, and cargoes which contain radioactive material are always present with all manipulation requisites according to applicable regulations. The transport and manipulation operations of radioactive material are performed in accordance with national and international requisites but, some individuals posses yet a high risk perception according to our experience, involving members of Brazilian port authorities, the Navy and cargoes handlers at the ports. So, exist yet a high quantity of refuses and delays during the transport by ship. Therefore, a communication strategy was developed and applied, to inform the risk perception, supplying information on the very principles of ionizing radiation, legislation and uses of radiation, and so, diminishing the quantity of refuses and delays. From that initial communication strategy on, it becomes evident the necessity of training and conscience making a movement for the problem of refuses and delays be diminished

Spectroscopic neutron radiography for a cargo scanning system

Energy Technology Data Exchange (ETDEWEB)

Rahon, Jill [Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA 02139 (United States); Danagoulian, Areg, E-mail: aregjan@mit.edu [Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA 02139 (United States); MacDonald, Thomas D. [Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA 02139 (United States); Hartwig, Zachary S. [Plasma Science and Fusion Center, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA 02139 (United States); Lanza, Richard C. [Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, MA 02139 (United States)

2016-06-01

Detection of cross-border smuggling of illicit materials and contraband is a challenge that requires rapid, low-dose, and efficient radiographic technology. The work we describe here is derived from a technique which uses monoenergetic gamma rays from low energy nuclear reactions, such as {sup 11}B(d,nγ){sup 12}C, to perform radiographic analysis of shipping containers. Transmission ratios of multiple monoenergetic gamma lines resulting from several gamma producing nuclear reactions can be employed to detect materials of high atomic number (Z), the details of which will be described in a separate paper. Inherent in this particular nuclear reaction is the production of fast neutrons which could enable neutron radiography and further characterization of the effective-Z of the cargo, especially within the range of lower Z. Previous research efforts focused on the use of total neutron counts in combination with X-ray radiography to characterize the hydrogenous content of the cargo. We present a technique of performing transmitted neutron spectral analysis to reconstruct the effective Z and potentially the density of the cargo. This is made possible by the large differences in the energy dependence of neutron scattering cross-sections between hydrogenous materials and those of higher Z. These dependencies result in harder transmission spectra for hydrogenous cargoes than those of non-hydrogenous cargoes. Such observed differences can then be used to classify the cargo based on its hydrogenous content. The studies presented in this paper demonstrate that such techniques are feasible and can provide a contribution to cargo security, especially when used in concert with gamma radiography.

The Liner Shipping Fleet Repositioning Problem with Cargo Flows

DEFF Research Database (Denmark)

Tierney, Kevin; Jensen, Rune Møller

2012-01-01

We solve an important problem for the liner shipping industry called the Liner Shipping Fleet Repositioning Problem (LSFRP). The LSFRP poses a large financial burden on liner shipping firms. During repositioning, vessels are moved between services in a liner shipping network. Shippers wish...

The Human Element and Autonomous Ships

Directory of Open Access Journals (Sweden)

Sauli Ahvenjärvi

2016-09-01

Full Text Available The autonomous ship technology has become a “hot” topic in the discussion about more efficient, environmentally friendly and safer sea transportation solutions. The time is becoming mature for the introduction of commercially sensible solutions for unmanned and fully autonomous cargo and passenger ships. Safety will be the most interesting and important aspect in this development. The utilization of the autonomous ship technology will have many effects on the safety, both positive and negative. It has been announced that the goal is to make the safety of an unmanned ship better that the safety of a manned ship. However, it must be understood that the human element will still be present when fully unmanned ships are being used. The shore-based control of a ship contains new safety aspects and an interesting question will be the interaction of manned and unmanned ships in the same traffic area. The autonomous ship technology should therefore be taken into account on the training of seafarers. Also it should not be forgotten that every single control algorithm and rule of the internal decision making logic of the autonomously navigating ship has been designed and coded by a human software engineer. Thus the human element is present also in this point of the lifetime navigation system of the autonomous ship.

VeriTainer radiation detector for intermodal shipping containers

International Nuclear Information System (INIS)

Redus, R.H.; Alioto, M.; Sperry, D.; Pantazis, T.

2007-01-01

The VeriSpreader TM radiation detection system will monitor every container passing through a shipping terminal without impeding the flow of commerce by making the radiation measurements during normal container handling. This is accomplished by integrating neutron and spectroscopic γ-ray detectors into a container crane spreader bar, the part of the crane that directly engages the intermodal shipping containers while moving from ship to shore and vice versa. The use of a spectroscopic γ-detector reduces the rate of nuisance alarms due to naturally occurring radioactive material (NORM). The combination of γ and neutron detection reduces the effectiveness of shielding and countermeasures. The challenges in this spreader bar-based approach arise from the harsh environment, particularly the mechanical shock and the vibration of the moving spreader bar, since the measurement is taken while the container is moving. The electrical interfaces in the port environment, from the crane to a central monitoring office, present further challenges. It is the packaging, electronic interfaces, and data processing software that distinguish this system, which is based on conventional radiation sensors. The core of the system is Amptek's GAMMA-RAD, which integrates a ruggedized scintillator/PMT, digital pulse shaping electronics, electronics for the neutron detector, power supplies, and an Ethernet interface. The design of the VeriTainer system and results from both the laboratory and a proof-of-concept test at the Port of Oakland, California will be presented

Multi-Criteria Optimisation of Liquid Cargo Transport According to Linguistic Approach to the Route Selection Task

Directory of Open Access Journals (Sweden)

Guze Sambor

2017-04-01

Full Text Available The main aim of the paper is to present the possibility of use of the multi-criteria optimization method Analytical Hierarchy Process (AHP to liquid cargo transportation by sea. Finding the optimal solution is not simple. There are many factors influencing the shipping process. In the case of liquid cargo, the most important thing is the safety of the crew, ship, and environment. Therefore, the Mathematical Theory of Evidence is introduced and used to determine the optimal path in terms of time and safety of transport. Moreover, the details of liquid cargo transport process are described with particular attention to ship to ship operations. Besides, the basic concept of the AHP method, steps of the algorithm are introduced. Finally, the multicriteria optimization of the transport of the liquid cargo from the Persian Gulf to Port of Gdansk is done. It is based on the experts′ opinions.

The shipping man adventures in ship finance

CERN Document Server

McCleery, Matthew

2013-01-01

When restless New York City hedge fund manager Robert Fairchild watches the Baltic Dry Cargo Index plunge 97%, registering an all-time high and a 25-year low within the span of just six months, he decides to buy a ship. Immediately fantasizing about naming a vessel after his wife, carrying a string of worry beads and being able to introduce himself as a "shipowner" at his upcoming college reunion, Fairchild immediately embarks on an odyssey into the most exclusive, glamorous and high stakes business in the world. From pirates off the coast of Somalia and on Wall Street to Greek and Norwegian shipping magnates, the education of Robert Fairchild is an expensive one. In the end, he loses his hedge fund, but he gains a life - as a Shipping Man. Part fast paced financial thriller, part ship finance text book, The Shipping Man is 310 pages of required reading for anyone with an interest in capital formation for shipping.

46 CFR 56.50-60 - Systems containing oil.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Systems containing oil. 56.50-60 Section 56.50-60... APPURTENANCES Design Requirements Pertaining to Specific Systems § 56.50-60 Systems containing oil. (a)(1) Oil-piping systems for the transfer or discharge of cargo or fuel oil must be separate from other piping...

46 CFR 154.650 - Cargo tank and process pressure vessel welding.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo tank and process pressure vessel welding. 154.650... Equipment Construction § 154.650 Cargo tank and process pressure vessel welding. (a) Cargo tank and process pressure vessel welding must meet Subpart 54.05 and Part 57 of this chapter. (b) Welding consumables used...

77 FR 21579 - Agency Information Collection Activities: Transfer of Cargo to a Container Station

Science.gov (United States)

2012-04-10

... Activities: Transfer of Cargo to a Container Station AGENCY: U.S. Customs and Border Protection, Department... a Container Station. This is a proposed extension of an information collection that was previously... Container Station. OMB Number: 1651-0096. Form Number: None. Abstract: Before the filing of an entry of...

The Design of Bulk Carrier Cargo Holds State Integrated Monitoring System

Directory of Open Access Journals (Sweden)

Gao Ru-jiang

2016-01-01

Full Text Available Most ship cargo hold Internal uses artificial watch or is unattended. Therefore, it is impossible to know the appropriate information of the cargo holds Internal timely and accurately. Cargo damage and ship accidents occurred frequently. Automation remote processing and monitoring alarm system for the bulk carrier is an important part of the marine automation. The system plays a significant role to guarantee the navigation safety for bulk carriers. The paper introduced the important parts of the integrated monitoring system, structural design, hardware configuration, various modules communication transmission and various data processing software design were included. Based on embedded development, the real time information including the cargo hold internal humidity temperature, oxygen concentration, smoke gas concentration, cold water well level and other data were collected, as well the hatch closed state was detected and the cargo hold internal real time video information was collected. Then the real-time communication between the control display and acquisition modules were assured. By adjusting the corresponding buttons on the bridge according to the monitoring information, so that the cargo hold always in a safe environment, so as to avoid cargo hold accidents.

Special closure for radioactive shipping container

International Nuclear Information System (INIS)

Otts, J.V.

1976-03-01

The objective of this program was to develop a special lid closure for radioactive material shipping containers, typically steel drums. Three closure techniques were designed, fabricated, and proven to be structurally adequate to protect 1000 lb when dropped 30 ft. The three designs were (1) a 6-in. lid extension (skirt), (2) a 6-in. inner lid, and (3) c-clamps used at the container/lid interface. Based upon structural integrity, economic impact, and minimal design change, the 6-in. lid extension is recommended

Competitive Liner Shipping Network Design

DEFF Research Database (Denmark)

Karsten, Christian Vad

.The contributions of this thesis cover modeling, methodology, and applications.The developed methods address operational (cargo routing), tactical (speed optimization and service selection), and strategic (network design) planning problems faced by liner shipping companies. Ultimately, the proposed methods help...... take the container transportation times that can be realized in the network nor the number of transshipments into consideration. This is mainly because the optimization problem is based on other transportation networks where these constraints are not decisive to the quality of the network. Furthermore......, the problem in itself is challenging to optimize due to its size and complexity. However, the field has seen crucial progress and is mature to include handling of competitiveness in the actual design of the network.As a liner shipping network is an organic entity, which is constantly changed to reflect...

Safety analysis report for packaging Lawrence Livermore Laboratories shipping containers

International Nuclear Information System (INIS)

Evans, J.H.

1975-12-01

The Lawrence Livermore Laboratories shipping containers were designed at Oak Ridge National Laboratory for use in transporting weapons and nuclear components. The design for the containers was evaluated to show compliance with applicable regulations governing packages in which radioactive and fissile materials are transported. Computational procedures were used to determine the structural integrity and thermal behavior of the containers relative to the standards for the normal conditions of transport. A full-scale container test model was destructively tested to verify compliance with the standards for the accident conditions. The results of the analytical evaluations and the tests demonstrate that the design for the Lawrence Livermore Laboratories shipping containers is in compliance with the applicable regulations

A review of a radioactive material shipping container including design, testing, upgrading compliance program and shipping logistics

International Nuclear Information System (INIS)

Celovsky, A.; Lesco, R.; Gale, B.; Sypes, J.

2003-01-01

Ten years ago Atomic Energy of Canada developed a Type B(U)-85 shipping container for the global transport of highly radioactive materials. This paper reviews the development of the container, including a summary of the design requirements, a review of the selected materials and key design elements, and the results of the major qualification tests (drop testing, fire test, leak tightness testing, and shielding integrity tests). As a result of the testing, improvements to the structural, thermal and containment design were made. Such improvements, and reasons thereof, are noted. Also provided is a summary of the additional analysis work required to upgrade the package from a Type B(U) to a Type B(F), i.e. essentially upgrading the container to include fissile radioisotopes to the authorized radioactive contents list. Having a certified shipping container is only one aspect governing the global shipments of radioactive material. By necessity the shipment of radioactive material is a highly regulated environment. This paper also explores the experiences with other key aspects of radioactive shipments, including the service procedures used to maintain the container certification, the associated compliance program for radioactive material shipments, and the shipping logistics involved in the transport. (author)

Automatic production planning for the construction of complex ships

NARCIS (Netherlands)

Rose, C.D.

2017-01-01

European shipyards specialize in building complex ship types including offshore vessels, yachts, dredgers, and cruise ships. One key difference between these ships and the simple cargo ships typically built in the Far East is the amount and variety of mission-related equipment required to operate

Compressed Sensing Techniques Applied to Ultrasonic Imaging of Cargo Containers

Directory of Open Access Journals (Sweden)

Yuri Álvarez López

2017-01-01

Full Text Available One of the key issues in the fight against the smuggling of goods has been the development of scanners for cargo inspection. X-ray-based radiographic system scanners are the most developed sensing modality. However, they are costly and use bulky sources that emit hazardous, ionizing radiation. Aiming to improve the probability of threat detection, an ultrasonic-based technique, capable of detecting the footprint of metallic containers or compartments concealed within the metallic structure of the inspected cargo, has been proposed. The system consists of an array of acoustic transceivers that is attached to the metallic structure-under-inspection, creating a guided acoustic Lamb wave. Reflections due to discontinuities are detected in the images, provided by an imaging algorithm. Taking into consideration that the majority of those images are sparse, this contribution analyzes the application of Compressed Sensing (CS techniques in order to reduce the amount of measurements needed, thus achieving faster scanning, without compromising the detection capabilities of the system. A parametric study of the image quality, as a function of the samples needed in spatial and frequency domains, is presented, as well as the dependence on the sampling pattern. For this purpose, realistic cargo inspection scenarios have been simulated.

A Base Integer Programming Model and Benchmark Suite for Liner-Shipping Network Design

DEFF Research Database (Denmark)

Brouer, Berit Dangaard; Alvarez, Fernando; Plum, Christian Edinger Munk

2014-01-01

. The potential for making cost-effective and energy-efficient liner-shipping networks using operations research (OR) is huge and neglected. The implementation of logistic planning tools based upon OR has enhanced performance of airlines, railways, and general transportation companies, but within the field......The liner-shipping network design problem is to create a set of nonsimple cyclic sailing routes for a designated fleet of container vessels that jointly transports multiple commodities. The objective is to maximize the revenue of cargo transport while minimizing the costs of operation...... sources of liner shipping for OR researchers in general. We describe and analyze the liner-shipping domain applied to network design and present a rich integer programming model based on services that constitute the fixed schedule of a liner shipping company. We prove the liner-shipping network design...

Nonlinear Container Ship Model for the Study of Parametric Roll Resonance

Directory of Open Access Journals (Sweden)

Christian Holden

2007-10-01

Full Text Available Parametric roll is a critical phenomenon for ships, whose onset may cause roll oscillations up to +-40 degrees, leading to very dangerous situations and possibly capsizing. Container ships have been shown to be particularly prone to parametric roll resonance when they are sailing in moderate to heavy head seas. A Matlab/Simulink parametric roll benchmark model for a large container ship has been implemented and validated against a wide set of experimental data. The model is a part of a Matlab/Simulink Toolbox (MSS, 2007. The benchmark implements a 3rd-order nonlinear model where the dynamics of roll is strongly coupled with the heave and pitch dynamics. The implemented model has shown good accuracy in predicting the container ship motions, both in the vertical plane and in the transversal one. Parametric roll has been reproduced for all the data sets in which it happened, and the model provides realistic results which are in good agreement with the model tank experiments.

SIMULATION OF CARGO CONTAINER INTERROGATION BY D-D NEUTRONS

International Nuclear Information System (INIS)

Lou, Tak Pui; Antolak, Arlyn

2007-01-01

High fidelity, three-dimensional computer models based on a CAD drawing of an intermodal cargo container, representative payload objects, and detector array panels were developed to simulate the underlying physical events taking place during active interrogation. These computer models are used to assess the performance of interrogation systems with different sources and detection schemes. In this presentation, we will show that the use oversimplified models, such as analyzing homogenized payloads only, can lead to errors in determining viable approaches for interrogation

Recommended welding criteria for use in the fabrication of shipping containers for radioactive materials

International Nuclear Information System (INIS)

Monroe, R.E.; Woo, H.H.; Sears, R.G.

1984-03-01

Welding and related operations are evaluated to assess the controls required to prevent weld-related failure of shipping containers used for transportation of radioactive materials. The report includes (1) recommended criteria for controlling welding as applied to shipping containers and (2) a discussion of modifications of the recommended industry Codes as applied to shipping containers. 13 references, 2 tables

Scanning of Cargo Containers by Gamma-Ray and Fast Neutron Radiography

International Nuclear Information System (INIS)

Yousri, A.M.; Bashter, I.I.; Megahid, M.R.; Osman, A.M.; Kansouh, W.A.; Reda, A.M.

2011-01-01

This paper describes the combined systems which were installed and tested to detect contraband smuggled in cargo containers. These combined systems are based on radiographers work by gamma-rays emitted from point source 60 Co with 0.5 Ci activity and neutrons emitted from point isotopic sources of Pu-α-Be as well as 14 MeV neutrons emitted from sealed tube neutron generator. The transmitted gamma ray through the inspected object was measured by gamma detection system with NaI(Tl) detector while the transmitted fast neutron beam was measured by a neutron gamma detection system with stilbene organic scintillator. The later possess the capability of discrimination between between gamma and neutron pulses using a discrimination system based on pulse shape discrimination method. The measured intensities of primary incident and transmitted beams of gamma-rays and fast neutrons were used to construct 2D cross-sectional images of the inspected objects hidden directly within benign materials of the container and for object screened by high dense material to stop object detection by gamma or X-rays. The constructed images for the inspected objects show the good capability and effectiveness of the installed gamma and neutron radiographers to detect illicit materials hidden in air cargo containers and sea containers of med size. They have also indicated that the developed scanning systems possess the ease of mobility and low cost of scanning

Trends of shipping markets development

Directory of Open Access Journals (Sweden)

Tomasz Nowosielski

2012-06-01

Full Text Available Shipping markets are dependent on international trade transactions that generate transport needs. These needs can dynamically change depending on global natural resources and commodity markets situation. The changes affecting shipping markets can also be caused by changes to the existing cargo flows and by establishing new ones in different geographies. It is anticipated that in the future shipping markets will change, visible by a decline in shipping in North America and Europe and an increase in Asia.

The economic potential of a cassette-type-reactor-installed nuclear ice-breaking container ship

International Nuclear Information System (INIS)

Kondo, Koichi; Takamasa, Tomoji

1999-01-01

An improved cassette-type marine reactor MRX (Marine Reactor X) which is currently researched and developed by the Japan Atomic Energy Research Institute is designed to be easily removed and transferred to another ship. If the reactor in a nuclear-powered ship, which is the reason for its higher cost, were replaced by the cassette-type-MRX, the reusability of the MRX would reduce the cost difference between nuclear-powered and diesel ships. As an investigation of one aspect of a cassette-type MRX, we attempted in this study to do an economic review of an MRX-installed nuclear-powered ice-breaking container ship sailing via the Arctic Ocean. The transportation cost between the Far East and Europe to carry one TEU (twenty-foot-equivalent container unit) over the entire life of the ship for an MRX (which is used for a 20-year period)-installed container ship sailing via the Arctic Ocean is about 70% higher than the Suez Canal diesel ship, carrying 8,000 TEU and sailing at 25 knots, and about 10% higher than the Suez Canal diesel ship carrying 4,000 TEU and sailing at 34 knots. The cost for a cassette-type-MRX (which is used for a 40-year period, removed and transferred to a second ship after being used for 20 years in the first ship)-installed nuclear-powered container ship is about 7% lower than that for the one operated for 20 years. Considering any loss or reduction in sales opportunities through the extension of the transportation period, the nuclear-powered container ship via the Arctic Sea is a more suitable means of transportation than a diesel ship sailing at 25 knots via the Suez Canal when the value of the commodities carried exceeds 2,800 dollars per freight ton. (author)

Economic potential of nuclear-powered ice-breaking container ship via the northern sea route

International Nuclear Information System (INIS)

Takamasa, Tomoji; Kondo, Koichi

2000-01-01

An improved cassette-type marine reactor MRX (Marine Reactor X) which is currently researched and developed by the JAERI is designed to be easily removed and transferred to another ship. If the reactor in a nuclear-powered ship, which is the reason for its higher cost, were replaced by the cassette-type-MRX, the reusability of the MRX would reduce the cost difference between nuclear-powered and diesel ships. As an investigation of one aspect of a cassette-type MRX, we attempted in this study to do an economic review of an MRX-installed nuclear-powered ice-breaking container ship sailing via the Arctic Ocean. The transportation cost between the Far East and Europe to carry one TEU (twenty-foot-equivalent container unit) over the entire life of the ship for an MRX (which is used for a 20-year period)-installed container ship sailing via the Arctic Ocean is about 70% higher than the Suez Canal diesel ship, carrying 8,000 TEU and sailing at 25 knots, and about 10% higher than the Suez Canal diesel ship carrying 4,000 TEU and sailing at 34 knots. The cost for a cassette-type-MRX (which is used for a 40-year period, removed and transferred to a second ship after being used for 20 years in the first ship)-installed nuclear-powered container ship is about 7% lower than that for the one operated for 20 years. Considering any loss or reduction in sales opportunities through the extension of the transportation period, the nuclear-powered container ship via the Arctic Sea is a more suitable means of transportation than a diesel ship sailing at 25 knots via the Suez Canal when the value of the commodities carried exceeds 2,800 dollars per freight ton. (author)

Agile service oriented shipping companies in the container terminal

Directory of Open Access Journals (Sweden)

W. Liu

2009-06-01

Full Text Available Agility is regarded as one of the core capabilities and the developing trend of supply chains and their enterprises. Along with the development of economical globalization, supply chain management and containerization as well as container ports as a part of supply chain take more roles like logistics or distribution centers. Under this background, the container terminal should have superior response and develop agility. The main goal of this paper is to emphasize and illustrate the importance and imminence of implementing agility in container terminals. To achieve this goal, the analysis of the economies of scale in the container terminal is presented. In this paper, however, more attention will be paid to agile service oriented shipping companies. The concept and characters of agile service in the container terminal is illustrated. The paper also focuses on the agile organizational structure of the container terminal. Finally, the fuzzy quality synthetic evaluation method is given to evaluate the performance level of agile service in container terminal oriented shipping companies.

Intentional cargo disruption by nefarious means: Examining threats, systemic vulnerabilities and securitisation measures in complex global supply chains.

Science.gov (United States)

McGreevy, Conor; Harrop, Wayne

2015-01-01

Global trade and commerce requires products to be securely contained and transferred in a timely way across great distances and between national boundaries. Throughout the process, cargo and containers are stored, handled and checked by a range of authorities and authorised agents. Intermodal transportation involves the use of container ships, planes, railway systems, land bridges, road networks and barges. This paper examines the the nefarious nature of intentional disruption and nefarious risks associated with the movement of cargo and container freight. The paper explores main threats, vulnerabilities and security measures relevant to significant intermodal transit risk issues such as theft, piracy, terrorism, contamination, counterfeiting and product tampering. Three risk and vulnerability models are examined and basic standards and regulations that are relevant to safe and secure transit of container goods across international supply networks are outlined.

ETR fuel element shipping container addendum to PR-T-79-011 (TR-466). Internal technical report

International Nuclear Information System (INIS)

Smith, M.C.

1979-01-01

In July, 1979, EG and G Idaho, Inc. was requested to evaluate the ETR Fuel Element Shipping Container for compliance with existing transport regulations, in order to ship GETR fuel elements from Vallecitos, California to the INEL. Technical report PR-T-79-011 (TR-466), ATR Fuel Element Shipping Container Safety Analysis, was used as a basis for this evaluation. The safety analysis contained in technical report PR-T-79-011 (TR-466) was performed utilizing the ATR, ETR, MTR, and SPERT shipping containers. The report determined the ETR Fuel Element Shipping Container does comply with the existing transport regulations for a Type A quantity, Fissile Class I shipping container. The ETR and GETR fuel elements are essentially identical in physical size, construction, and fissile material content, the analysis documented in this report has determined the shipment of GETR fuel elements in the ETR shipping container to be safe and pose no threat to the public health and safety

The ''nuclear car wash'': a scanner to detect illicit special nuclear material in cargo containers

International Nuclear Information System (INIS)

Slaughter, D. R.; Accatino, M. R.; Bernstein, A.; Dougan, A. D.; Hall, J. M.; Loshak, A.; Manatt, D. R.; Pohl, B. A.; Prussin, S. G.; Walling, R. S.; Weirup, D. L.

2004-01-01

There is an urgent need to improve the reliability of screening cargo containers for illicit nuclear material that may be hidden there for terrorist purposes. A screening system is described for detection of fissionable material hidden in maritime cargo containers. The system makes use of a low intensity neutron beam for producing fission; and the detection of the abundant high-energy γ rays emitted in the β-decay of short-lived fission products and β-delayed neutrons. The abundance of the delayed γ rays is almost an order of magnitude larger than that of the delayed neutrons normally used to detect fission and they are emitted on about the same time scale as the delayed neutrons, i.e., ∼1 min. The energy and temporal distributions of the delayed γ rays provide a unique signature of fission. Because of their high energy, these delayed γ rays penetrate loW--Z cargoes much more readily than the delayed neutrons. Coupled with their higher abundance, the signal from the delayed γ rays escaping from the container is predicted to be as much as six decades more intense than the delayed neutron signal, depending upon the type and thickness of the intervening cargo. The γ rays are detected in a large array of scintillators located along the sides of the container as it is moved through them. Measurements have confirmed the signal strength in somewhat idealized experiments and have also identified one interference when 14.5 MeV neutrons from the D, T reaction are used for the interrogation. The interference can be removed easily by the appropriate choice of the neutron source

46 CFR Table II to Part 150 - Grouping of Cargoes

Science.gov (United States)

2010-10-01

... solution Potassium oleate Potassium salt of polyolefin acid Propyl acetate Propylene carbonate Propylene... lignosulfonate solution Sodium polyacrylate solution 2 Sodium salt of Ferric hydroxyethylethylenediamine... 46 Shipping 5 2010-10-01 2010-10-01 false Grouping of Cargoes II Table II to Part 150 Shipping...

Solving the Liner Shipping Fleet Repositioning Problem with Cargo Flows

DEFF Research Database (Denmark)

Tierney, Kevin; Askelsdottir, Björg; Jensen, Rune Møller

2015-01-01

We solve a central problem in the liner shipping industry called the liner shipping fleet repositioning problem (LSFRP). The LSFRP poses a large financial burden on liner shipping firms. During repositioning, vessels are moved between routes in a liner shipping network. Liner carriers wish...

Forecasting Container Shipping Freight Rates for the Far East-Northern Europe Trade Lane

DEFF Research Database (Denmark)

Munim, Ziaul Haque; Schramm, Hans-Joachim

2016-01-01

econometric and time series modelling have been rather limited. Therefore, in this paper, we discuss contemporary container freight rate dynamics in an attempt to forecast for the Far East to Northern Europe trade lane. Methodology-wise, we employ autoregressive integrated moving average (ARIMA) as well......This study introduces a state-of-the-art volatility forecasting method for container shipping freight rates. Over the last decade, the container shipping industry has become very unpredictable. The demolition of the shipping conferences system in 2008 for all trades calling a port in the European...

The economic potential of a cassette-type-reactor-installed nuclear ice-breaking container ship

International Nuclear Information System (INIS)

Kondo, K.; Takamasa, T.

2000-01-01

The design concept of the cassette-type-reactor MRX (Marine Reactor X), being under development in Japan for the nuclear ice-breaker container ship is described. The MRX reactor is the monoblock water-cooled and moderated reactor with passive cooling system of natural circulation. It is shown that application of the reactor being under consideration gives an opportunity to decrease greatly the difference in prices for similar nuclear and diesel ships. Economic estimations for applicability of the nuclear ice-breaker container ship with the MRX reactor in Arctics for transportation of standard containers TEU from Europe to Far East as compared with transportation of the same containers by diesel ships via Suets Canal are made [ru

Models for Comparing Air-Only and Sea/Air Transportation of Wartime Deployment Cargo

National Research Council Canada - National Science Library

Theres, Michael

1998-01-01

...) to an overseas Port of Debarkation (POD). This thesis evaluates a proposal to load air-transportable cargo aboard vessels at CONUS seaports and to ship that cargo to an appropriately located sea-air-interface (SAI...

Scientific opinion on the evaluation of substances as acceptable previous cargoes for edible fats and oils

DEFF Research Database (Denmark)

Petersen, Annette

Shipping of edible fats and oils into Europe is permitted in bulk tanks, provided that the previous cargo is included in a positive list. The European Commission requested EFSA to evaluate the acceptability as previous cargoes for fats and oils the substances calcium lignosulphonate, methyl acetate...... the criteria for acceptability as previous cargoes. Due to uncertainties, mainly with regard to the composition and toxicity of the low molecular mass fraction, and the fact that the toxicological database is limited to the 40–65 grade and does not cover all grades of calcium lignosulphonate shipped...... as previous cargoes, the EFSA Panel on Contaminants in the Food Chain (CONTAM Panel) concluded that calcium lignosulphonate does not meet the criteria for acceptability as a previous cargo. Only food-grade ammonium sulphate meets the criteria for acceptability as a previous cargo due to uncertainties about...

Risks of shipping plutonium by truck, train, and cargo aircraft

International Nuclear Information System (INIS)

Johnson, J.F.; Andrews, W.B.

1978-05-01

Risk is defined as the product of the probability of a release of material to the environment and the consequences resulting from the release. The methodology is composed of four basic steps: a detailed description of the transportation system, the identification of possible material release sequences, the evaluation of the probabilities and the consequences of the releases, and calculation and assessment of the risk. The system description includes projected industry characteristics, amounts to be shipped and the number of shipments required, material characteristics, transport mode and carrier, container types, routes (and any restrictions), and weather and population zones. Release sequences are identified using fault tree analyses. Releases are evaluated using container failure data and mathematical models for dispersion and health effects. The risk is then calculated and compared to other known risks

46 CFR Table I to Part 150 - Alphabetical List of Cargoes

Science.gov (United States)

2010-10-01

... cargo name), see Caustic potash solution 5 2 CPS Potassium oleate 34 POE Potassium salt of polyolefin... Sodium polyacrylate solution 43 2 Sodium salt of Ferric hydroxyethylethylenediaminetriacetic acid... 46 Shipping 5 2010-10-01 2010-10-01 false Alphabetical List of Cargoes I Table I to Part 150...

46 CFR 105.25-7 - Ventilation systems for cargo tank or pumping system compartment.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Ventilation systems for cargo tank or pumping system... Requirements-When Cargo Tanks Are Installed Below Decks § 105.25-7 Ventilation systems for cargo tank or pumping system compartment. (a) Each compartment shall be provided with a mechanical exhaust system...

46 CFR 153.12 - IMO Certificates for United States Ships.

Science.gov (United States)

2010-10-01

... 8, or the Officer in Charge, Marine Inspection, issues a United States ship an IMO Certificate... 46 Shipping 5 2010-10-01 2010-10-01 false IMO Certificates for United States Ships. 153.12 Section... CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS General § 153.12...

Nonlinear Container Ship Model for the Study of Parametric Roll Resonance

DEFF Research Database (Denmark)

Holden, Christian; Galeazzi, Roberto; Rodríguez, Claudio

2007-01-01

Parametric roll is a critical phenomenon for ships, whose onset may cause roll oscillations up to 40, leading to very dangerous situations and possibly capsizing. Container ships have been shown to be particularly prone to parametric roll resonance when they are sailing in moderate to heavy head ...

Specialization and Flexibility in Port Cargo Handling

Directory of Open Access Journals (Sweden)

Hakkı KİŞİ

2016-11-01

Full Text Available Cargo handling appears to be the fundamental function of ports. In this context, the question of type of equipment and capacity rate need to be tackled with respect to cargo handling principles. The purpose of this study is to discuss the types of equipment to be used in ports, relating the matter to costs and capacity. The question is studied with a basic economic theoretical approach. Various conditions like port location, size, resources, cargo traffic, ships, etc. are given parameters to dictate the type and specification of the cargo handling equipment. Besides, a simple approach in the context of cost capacity relation can be useful in deciding whether to use specialized or flexible equipment. Port equipment is sometimes expected to be flexible to handle various types of cargo as many as possible and sometimes to be specialized to handle one specific type of cargo. The cases that might be suitable for those alternatives are discussed from an economic point of view in this article. Consequently, effectiveness and efficiency criteria play important roles in determining the handling equipment in ports.

Major impact in shipping and port sectors

Energy Technology Data Exchange (ETDEWEB)

Cottrill, K.

1985-08-01

The impact of information technology (IT) on operations efficiency in the transport field is comparable to the revolution brought on by the use of containers. The author examines the influence of IT on British shipping in terms of documentation, cargo tracking, and trend analysis on the operational side and communications links on the structural side. Shipboard computers were slow to penetrate the traditional bastion of the ship's bridge, but the effects of automation are already evident in the size of crews and their work roles. Britain is a world leader in specialized networks in the ports sector. A European-based initiative for a European ports database is in the development stage. It is essential for the IT networks to be compatible both nationally and internationally for the technology to be worthwhile.

46 CFR 308.524 - Application for cancellation of Open Cargo Policy, Form MA-304.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Application for cancellation of Open Cargo Policy, Form... § 308.524 Application for cancellation of Open Cargo Policy, Form MA-304. The standard form of application for cancellation of an Open Cargo Policy Form MA-304 may be obtained from the American War Risk...

CFD simulations of wind loads on a container ship : Validation and impact of geometrical simplifactions

NARCIS (Netherlands)

Janssen, W.D.; Blocken, B.J.E.; van Wijhe, H.J.

2017-01-01

Due to the increasing windage area of container ships, wind loads are playing a more important role in navigating the ship at open sea and especially through harbor areas. This paper presents 3D steady RANS CFD simulations of wind loads on a container ship, validation with wind-tunnel measurements

Prediction of the Main Engine Power of a New Container Ship at the Preliminary Design Stage

Science.gov (United States)

Cepowski, Tomasz

2017-06-01

The paper presents mathematical relationships that allow us to forecast the estimated main engine power of new container ships, based on data concerning vessels built in 2005-2015. The presented approximations allow us to estimate the engine power based on the length between perpendiculars and the number of containers the ship will carry. The approximations were developed using simple linear regression and multivariate linear regression analysis. The presented relations have practical application for estimation of container ship engine power needed in preliminary parametric design of the ship. It follows from the above that the use of multiple linear regression to predict the main engine power of a container ship brings more accurate solutions than simple linear regression.

46 CFR 308.523 - Application for revision of Open Cargo Policy, Form MA-303.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Application for revision of Open Cargo Policy, Form MA... Application for revision of Open Cargo Policy, Form MA-303. An application for the revision of an Open Cargo Policy shall be filed in duplicate with the Underwriting Agent on a form which may be obtained from the...

Calculation of the collision resistance of ships and its assessment for classification purposes

International Nuclear Information System (INIS)

Boeckenhauer, M.; Egge, E.D.

1994-01-01

Within the framework of a research programme ''Tanker Safety'', Germanischer Lloyd has developed a program system for the evaluation of the absorbed plastic deformation energy in a ship-ship collision. The ultimate load capacities of the ship structures in the areas affected by the collision are evaluated stepwise. The total collision energy absorbed by plastic deformations of the ship structures is evaluated on the basis of the minima of the ultimate load capacities and the corresponding penetration depths. By means of the collision energy absorbed, the collision speed necessary to cause damage can be determined.It is now possible to classify ships with regard to their resistance against collisions and to assign relevant class notations.The resistance of a ship against collision impacts is expressed by the class notation COLL with index numbers ranging from 1 to 6. The index numbers indicate that - as compared with a non-strengthened single hull reference ship - a critical situation is likely to occur only if the deformation energy absorbed in the collision exceeds that of the non-strengthened reference ship by specified values.A ''critical situation'' is defined by, for example, rupture of cargo tanks with subsequent spillage of cargo or water ingress into dry cargo holds. ((orig.))

46 CFR 35.30-10 - Cargo tank hatches, ullage holes, and Butterworth plates-TB/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo tank hatches, ullage holes, and Butterworth plates... OPERATIONS General Safety Rules § 35.30-10 Cargo tank hatches, ullage holes, and Butterworth plates—TB/ALL. No cargo tank hatches, ullage holes, or Butterworth plates shall be opened or shall remain open...

Container shipping service selection and cargo routing with transshipment limits

DEFF Research Database (Denmark)

Balakrishnan, Anantaram; Karsten, Christian Vad

2017-01-01

containing links (representing sub-paths) between every pair of ports visited by a candidate service. This sub-path structure, together with our approach of indexing the flow variables by transportation stage, enables the model to accurately capture transshipment costs and enforce transshipment limits....... To reduce the computational time to solve this problem, we develop preprocessing steps that exploit network structure to eliminate variables, describe valid inequalities to strengthen the model's linear programming relaxation, and propose an optimization-based heuristic algorithm to generate good initial...

Application of Quantitative Models, MNLR and ANN in Short Term Forecasting of Ship Data

OpenAIRE

P.Oliver Jayaprakash; K. Gunasekaran

2011-01-01

Forecasting has been the trouble-free way for the port authorities to derive the future expected values of service time of Bulk cargo ships handled at ports of South India. The short term forecasting could be an effective tool for estimating the resource requirements of recurring ships of similar tonnage and Cargo. Forecasting the arrival data related to port based ship operations customarily done using the standard algorithms and assumptions. The regular forecasting methods were decompositio...

Full Scale Measurements of the Hydro-Elastic Response of Large Container Ships for Decision Support

DEFF Research Database (Denmark)

Andersen, Ingrid Marie Vincent

scale measurements from four container ships of 4,400 TEU, 8,600 TEU, 9,400 TEU and 14,000 TEU Primarily, strains measured near the deck amidships are used. Furthermore, measurements of motions and the encountered sea state are available for one of the ships. The smallest ship is in operation...... frequency with the waves. Together with the relatively high design speed and often pronounced bow flare this makes large container ship more sensitive to slamming and, consequently, the effects of wave-induced hull girder vibrations. From full scale strain measurements of individual, measured hull girder......The overall topic of this thesis is decision support for operation of ships and several aspects are covered herein. However, the main focus is on the wave-induced hydro-elastic response of large container ships and its implications on the structural response. The analyses are based mainly on full...

Study on Alternative Cargo Launch Options from the Lunar Surface

Energy Technology Data Exchange (ETDEWEB)

Cheryl A. Blomberg; Zamir A. Zulkefli; Spencer W. Rich; Steven D. Howe

2013-07-01

In the future, there will be a need for constant cargo launches from Earth to Mars in order to build, and then sustain, a Martian base. Currently, chemical rockets are used for space launches. These are expensive and heavy due to the amount of necessary propellant. Nuclear thermal rockets (NTRs) are the next step in rocket design. Another alternative is to create a launcher on the lunar surface that uses magnetic levitation to launch cargo to Mars in order to minimize the amount of necessary propellant per mission. This paper investigates using nuclear power for six different cargo launching alternatives, as well as the orbital mechanics involved in launching cargo to a Martian base from the moon. Each alternative is compared to the other alternative launchers, as well as compared to using an NTR instead. This comparison is done on the basis of mass that must be shipped from Earth, the amount of necessary propellant, and the number of equivalent NTR launches. Of the options, a lunar coil launcher had a ship mass that is 12.7% less than the next best option and 17 NTR equivalent launches, making it the best of the presented six options.

Estimating ship emissions based on AIS data for port of Tianjin, China

Science.gov (United States)

Chen, Dongsheng; Zhao, Yuehua; Nelson, Peter; Li, Yue; Wang, Xiaotong; Zhou, Ying; Lang, Jianlei; Guo, Xiurui

2016-11-01

A detailed exhaust emission inventory of ships by using Automatic Identification System (AIS) data was developed for Tianjin Port, one of the top 10 world container ports and the largest port in North China. It was found that in 2014, ship emissions are 2.93 × 104, 4.13 × 104, 4.03 × 103, 3.72 × 103, 1.72 × 103 and 3.57 × 103 tonnes of SO2, NOx, PM10, PM2.5, NMVOC and CO respectively, which are equivalent to 11.07%, 9.40%, 2.43%, 3.10%, 0.43% and 0.16% respectively of the non-ship anthropogenic totals in Tianjin. The total CO2 emissions is approximately 1.97 × 106 tonnes. The container ships and dry bulk cargo ships contributed about 70% of the total ship emissions of NOx, SO2 and PM10. Pollutants were mainly emitted during cruise and hotelling modes, and the highest intensities of emissions located in the vicinity of fairways, berth and anchorage areas in Tianjin Port. Distinctive difference between the lowest (February) and the highest (September) monthly emissions is due to the adjustment of freight volume during the Chinese New Year and the months before and after it.

Thermal analysis of the IDENT 1578 fuel pin shipping container

International Nuclear Information System (INIS)

Ingham, J.G.

1980-01-01

The IDENT 1578 container, which is a 110-in. long 5.5-in. OD tube, is designed for shipping FFTF fuel elements in T-3 casks between HEDL, HFEF, and other laboratories. The thermal analysis was conducted to evaluate whether or not the container satisfies its thermal design criteria

A Survey of Empty Container Flow Balance in Turkish Ports

OpenAIRE

Ünal ÖZDEMİR; Abdulaziz GUNEROGLU; Süleyman KÖSE; Faruk Buğra DEMİREL

2015-01-01

Container transportation is the most preferred maritime commercial freight distribution in entire world except liquefied product transportation by tankers and bulk carriers. Totally 95% volume of general cargo is transported by container ships in the world due to fast, cheap and safe carrying potential of the goods transfer. Containerization has become recent phenomena in the field of maritime transportation and the quantity of goods transported by containers is increasing day by day as...

The Northern Sea Routes and Korea's Trade with Europe: Implications for Korea's Shipping Industry

Directory of Open Access Journals (Sweden)

Yeong-Seok Ha

2014-12-01

Full Text Available Melting Arctic waters have brought about global opportunities and challenges. One distinctive opportunity presented by the increasingly ice-free Arctic Ocean is its availability for shipping cargos between Europe and Asia. In adopting highly simplified assumptions of the Northern Sea Route (NSR being navigable and economical enough for shipping and NSR completely substituting for the incumbent Suez Canal route, this paper analyzes the maximum number of voyages possible for the transshipment of container cargo throughput for Korea's trade with Europe, particularly with Europe-17 and Europe-7. Our analysis shows the number of voyages range from over 2,900 to as little as 237 for Europe-17, depending on vessel sizes, when NSR is available for the whole year. With NSR opening for three months, the corresponding figures vary between 727 and 60 for Europe-17, and the figures for Europe-7 are between 2,725 and 222 and 682 and 56 voyages, respectively.

46 CFR 308.551 - War risk insurance clearing agency agreement for cargo, Form MA-321.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false War risk insurance clearing agency agreement for cargo... EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Cargo Insurance Iv-General § 308.551 War risk insurance... American War Risk Agency or MARAD. ...

Development of methodology for certification of Type B shipping containers using analytical and testing techniques

International Nuclear Information System (INIS)

Sharp, R.R.; Varley, D.T.

1993-01-01

The use of multidisciplinary teams to develop Type B shipping containers improves the quality and reliability of these reusable packagings. Including the people involved in all aspects of the design, certification and use of the package leads to more innovative, user-friendly containers. Concurrent use of testing and analysis allows engineers to more fully characterize a shipping container's responses to the environments given in the regulations, and provides a strong basis for certification. The combination of the input and output of these efforts should provide a general methodology that designers of Type B radioactive material shipping containers can utilize to optimize and certify their designs. (J.P.N.)

Heat transfer in a fuel pin shipping container

International Nuclear Information System (INIS)

Ingham, J.G.

1980-01-01

Maximum cladding temperatures occur when the IDENT 1578 fuel pin shipping container is installed in the T-3 Cask. The maximum allowable cladding temperature of 800 0 F is reached when the rate of energy deposited in the 19-pin basket reaches 400 watts. Since 45% of the energy which is generated in the fuel escapes the 19-pin basket without being deposited, mostly gamma energy, the maximum allowable rate of heat generation is 400/.55 = 727 watts. Similarly, the maximum allowable cladding temperature of 800 0 F is reached when the rate of energy deposited in the 40-pin basket reaches 465 watts. Since 33% of the energy which is generated in the fuel escapes the 40-pin basket without being deposited, mostly gamma energy, the maximum allowable rate of heat generation is 465/.66 = 704 watts. The IDENT 1578 fuel pin shipping container therefore meets its thermal design criteria. IDENT 1578 can handle fuel pins with a decay heat load of 600 watts while maintaining the maximum fuel pin cladding temperature below 800 0 F. The emissivities which were determined from the test results for the basket tubes and container are relatively low and correspond to new, shiny conditions. As the IDENT 1578 container is exposed to high temperatures for extended periods of time during the transportation of fuel pins, the emissivities will probably increase. This will result in reduced temperatures

Influence of Variable Acceleration on Parametric Roll Motion of a Container Ship

Directory of Open Access Journals (Sweden)

Emre PEŞMAN

2016-09-01

Full Text Available Ship operators increase or decrease thrust force of ships to avoid parametric roll motion. These operations cause varying acceleration values. In this study, influence of variable acceleration and deceleration of ships on roll motion is investigated in longitudinal waves. The method which is referred as simple model is utilized for analysis. Simple Model is one degree of freedom nonlinear parametric roll motion equation which contains changing velocity and restoring moment in waves with respect to time. Ship velocities in waves are predicted by XFlow software for various thrust forces. Results indicate that variable acceleration has significant effect on parametric roll phenomenon.

Surveying, Modeling and 3d Representation of a wreck for Diving Purposes: Cargo Ship "vera"

Science.gov (United States)

Ktistis, A.; Tokmakidis, P.; Papadimitriou, K.

2017-02-01

This paper presents the results from an underwater recording of the stern part of a contemporary cargo-ship wreck. The aim of this survey was to create 3D representations of this wreck mainly for recreational diving purposes. The key points of this paper are: a) the implementation of the underwater recording at a diving site; b) the reconstruction of a 3d model from data that have been captured by recreational divers; and c) the development of a set of products to be used by the general public for the ex situ presentation or for the in situ navigation. The idea behind this project is to define a simple and low cost procedure for the surveying, modeling and 3D representation of a diving site. The perspective of our team is to repeat the proposed methodology for the documentation and the promotion of other diving sites with cultural features, as well as to train recreational divers in underwater surveying procedures towards public awareness and community engagement in the maritime heritage.

Wind-Tunnel Investigation of Wind Loads on a Post-Panamax Container Ship as a Function of the Container Configuration on Deck

DEFF Research Database (Denmark)

Andersen, Ingrid Marie Vincent

2012-01-01

An investigation of the wind forces acting on a 9,000+ TEU container ship has been carried out through a series of wind tunnel tests. It was investigated how the wind forces depend on the container configuration on the deck using a 1:450 scale model and a series of appropriate container...... are presented as nondimensional coefficients. It is concluded, that the measured forces and moment depend on the container configuration on deck, and the results may provide a general idea of how the magnitude of the wind forces is affected by a given container stacking configuration on a similar container ship....

Program to develop analytical tools for environmental and safety assessment of nuclear material shipping container systems

International Nuclear Information System (INIS)

Butler, T.A.

1978-11-01

This paper describes a program for developing analytical techniques to evaluate the response of nuclear material shipping containers to severe accidents. Both lumped-mass and finite element techniques are employed to predict shipping container and shipping container-carrier response to impact. The general impact problem is computationally expensive because of its nonlinear, three-dimensional nature. This expense is minimized by using approximate models to parametrically identify critical cases before more exact analyses are performed. The computer codes developed for solving the problem are being experimentally substantiated with test data from full-scale and scale-model container drop tests. 6 figures, 1 table

Parametrical Method for Determining Optimal Ship Carrying Capacity and Performance of Handling Equipment

Directory of Open Access Journals (Sweden)

Michalski Jan P.

2016-04-01

Full Text Available The paper presents a method of evaluating the optimal value of the cargo ships deadweight and the coupled optimal value of cargo handling capacity. The method may be useful at the stage of establishing the main owners requirements concerning the ship design parameters as well as for choosing a proper second hand ship for a given transportation task. The deadweight and the capacity are determined on the basis of a selected economic measure of the transport effectiveness of ship – the Required Freight Rate. The mathematical model of the problem is of a deterministic character and the simplifying assumptions are justified for ships operating in the liner trade. The assumptions are so selected that solution of the problem is obtained in analytical closed form. The presented method can be useful for application in the preliminary ship design or in the simulation of pre-investment transportation task studies.

Determining Domestic Container Shipping as an Enforcement of Indonesian International Hub Port

Science.gov (United States)

Nur, H. I.; Lazuardi, S. D.; Hadi, F.; Hapis, M.

2018-03-01

According to Presidential Regulation Number 26 year of 2012 about the National Logistics System Development Blueprint, the Indonesian government proposed to build two international hub ports, which were in Port of Kuala Tanjung for the western region and Port of Bitung for eastern region. Therefore, the optimum routes and fleet size are required to support the enforcement of Indonesian International Hub Port. The optimization model is used to obtain the optimum route and fleet by minimizing the total shipping costs, while considering the container demand. The result of analysis obtained that the optimum route and fleet size for the western region of Indonesia were: (1) Kuala Tanjung-Belawan required 15 ships of 1,000 TEU; (2) Kuala Tanjung-Tanjung Priok required 73 ships of 2,500 TEU; (3) Kuala Tanjung- Tanjung Perak required 44 ships of 2,500 TEU. Meanwhile, the optimum route and fleet size for the eastern region of Indonesia consisted of: (1) Bitung-Sorong required 1 ship of 500 TEU; (2) Bitung-Banjarmasin required 3 ships of 500 TEU; and (3) Bitung-Makassar required 1 ship of 1,500 TEU.

Ship inspection strategies: effects on maritime safety and environmental protection

NARCIS (Netherlands)

Heij, C.; Bijwaard, G.E.; Knapp, S.

2011-01-01

Global trade largely depends on maritime transport, and appropriate ships are needed to protect cargo but to minimize environmental damage and to this end, flag and port state authorities expend considerable effort in ship safety inspections. This paper investigates the safety gains of current

Refuses and delays in the transportation by ship of radioactive material; Recusas e demoras no transporte maritimo de material radioativo

Energy Technology Data Exchange (ETDEWEB)

Xavier, Clarice; Sobreira, Ana Celia [REM Industria e Comercio Ltda., Sao Paulo, SP (Brazil)

2011-10-26

Some Class 7 materials can only be transported by ship, making that load and unload activities can be done in a port. In the Brazil, the port of Santos posses the most volume of cargo manipulation, and cargoes which contain radioactive material are always present with all manipulation requisites according to applicable regulations. The transport and manipulation operations of radioactive material are performed in accordance with national and international requisites but, some individuals posses yet a high risk perception according to our experience, involving members of Brazilian port authorities, the Navy and cargoes handlers at the ports. So, exist yet a high quantity of refuses and delays during the transport by ship. Therefore, a communication strategy was developed and applied, to inform the risk perception, supplying information on the very principles of ionizing radiation, legislation and uses of radiation, and so, diminishing the quantity of refuses and delays. From that initial communication strategy on, it becomes evident the necessity of training and conscience making a movement for the problem of refuses and delays be diminished

Empty Container Logistics

Directory of Open Access Journals (Sweden)

Jakov Karmelić

2012-05-01

Full Text Available Within the whole world container traffic, the largest share of containers is in the status of repositioning. Container repositioning results from the need for harmonization between the point of empty container accumulation and the point of demand, and waiting time for the availability of the first next transport of cargo. This status of containers on the container market is the consequence of imbalances in the worldwide trade distribution on most important shipping routes. The need for fast and effective reallocation of empty containers causes high costs and often represents an obstacle affecting the efficiency of port container terminals and inland carriers.In accordance with the above issue, this paper is mainly focused on the analysis of the data concerning global container capacities and the roots of container equipment imbalances, with the aim of determining the importance of empty container management and the need for empty container micro-logistic planning at the spread port area.

Power unit-cargo space link in transport

Directory of Open Access Journals (Sweden)

Radmilović Zoran R.

2005-01-01

Full Text Available This paper deals with transportation technology regarding links between power unit and cargo space. These links can be divided into two groups: rigid and flexible. Rigid link, established between power unit and cargo space, is dominant in maritime and road transport (sea ships and trucks, and occasionally in transport on inland waterways (self- propelled barges. Flexible link is used in the railroad transport (systems with trailers and semi trailers, and in inland waterway transport (push - towing and pulling systems, and combinations of the systems. The main goal of this research is determination of possible link types and organization of the means of transportation.

Deep-water measurements of container ship radiated noise signatures and directionality.

Science.gov (United States)

Gassmann, Martin; Wiggins, Sean M; Hildebrand, John A

2017-09-01

Underwater radiated noise from merchant ships was measured opportunistically from multiple spatial aspects to estimate signature source levels and directionality. Transiting ships were tracked via the Automatic Identification System in a shipping lane while acoustic pressure was measured at the ships' keel and beam aspects. Port and starboard beam aspects were 15°, 30°, and 45° in compliance with ship noise measurements standards [ANSI/ASA S12.64 (2009) and ISO 17208-1 (2016)]. Additional recordings were made at a 10° starboard aspect. Source levels were derived with a spherical propagation (surface-affected) or a modified Lloyd's mirror model to account for interference from surface reflections (surface-corrected). Ship source depths were estimated from spectral differences between measurements at different beam aspects. Results were exemplified with a 4870 and a 10 036 twenty-foot equivalent unit container ship at 40%-56% and 87% of service speeds, respectively. For the larger ship, opportunistic ANSI/ISO broadband levels were 195 (surface-affected) and 209 (surface-corrected) dB re 1 μPa 2 1 m. Directionality at a propeller blade rate of 8 Hz exhibited asymmetries in stern-bow (<6 dB) and port-starboard (<9 dB) direction. Previously reported broadband levels at 10° aspect from McKenna, Ross, Wiggins, and Hildebrand [(2012b). J. Acoust. Soc. Am. 131, 92-103] may be ∼12 dB lower than respective surface-affected ANSI/ISO standard derived levels.

Confirmation tests of PWR surveillance capsule shipping container

International Nuclear Information System (INIS)

Tomita, N.; Ue, K.; Ohashi, M.; Asada, K.; Yoneda, Y.

1980-01-01

Mitsubishi Heavy Industries, Ltd. carried out the confirmation tests to confirm the reliability of the PWR surveillance capsule shipping container and to collect cask design data using a 10-ton weight full scale model at Kobe Shipyard and Engine Works. This report presents the outline of these tests. The B Type container was a cylinder 3289 mm long, 1080 mm in diameter and designed in accordance with the new modified Japanese regulations similar to IAEA regulation. These tests consist of four 9 m drop tests, two 1 m puncture tests, a fire test and an immersion test. In conclusion, safetyness of this container has been proved and various technical data for cask design were also collected through these tests. (author)

Behavior analysis of container ship in maritime accident in order to redefine the operating criteria

Science.gov (United States)

Ancuţa, C.; Stanca, C.; Andrei, C.; Acomi, N.

2017-08-01

In order to enhance the efficiency of maritime transport, container ships operators proceeded to increase the sizes of ships. The latest generation of ships in operation has 19,000 TEU capacity and the perspective is 21,000 TEU within the next years. The increasing of the sizes of container ships involves risks of maritime accidents occurrences. Nowadays, the general rules on operational security, tend to be adjusted as a result of the evaluation for each vessel. To create the premises for making an informed decision, the captain have to be aware of ships behavior in such situations. Not less important is to assure permanent review of the procedures for operation of ship, including the specific procedures in special areas, confined waters or separation schemes. This paper aims at analysing the behavior of the vessel and the respond of the structure of a container ship in maritime accident, in order to redefine the operating criteria. The method selected by authors for carrying out the research is computer simulations. Computer program provides the responses of the container ship model in various situations. Therefore, the simulations allow acquisition of a large category of data, in the scope of improving the prevention of accidents or mitigation of effects as much as possible. Simulations and assessments of certain situations that the ship might experience will be carried out to redefine the operating criteria. The envisaged scenarios are: introducing of maneuver speed for specific areas with high risk of collision or grounding, introducing of flooding scenarios of some compartments in loading programs, conducting of complex simulations in various situations for each vessel type. The main results of this work are documented proposals for operating criteria, intended to improve the safety in case of marine accidents, collisions and groundings. Introducing of such measures requires complex cost benefit analysis, that should not neglect the extreme economic impact

PHOTOGRAMMETRIC MODEL BASED METHOD OF AUTOMATIC ORIENTATION OF SPACE CARGO SHIP RELATIVE TO THE INTERNATIONAL SPACE STATION

Directory of Open Access Journals (Sweden)

Y. B. Blokhinov

2012-07-01

Full Text Available The technical problem of creating the new Russian version of an automatic Space Cargo Ship (SCS for the International Space Station (ISS is inseparably connected to the development of a digital video system for automatically measuring the SCS position relative to ISS in the process of spacecraft docking. This paper presents a method for estimating the orientation elements based on the use of a highly detailed digital model of the ISS. The input data are digital frames from a calibrated video system and the initial values of orientation elements, these can be estimated from navigation devices or by fast-and-rough viewpoint-dependent algorithm. Then orientation elements should be defined precisely by means of algorithmic processing. The main idea is to solve the exterior orientation problem mainly on the basis of contour information of the frame image of ISS instead of ground control points. A detailed digital model is used for generating raster templates of ISS nodes; the templates are used to detect and locate the nodes on the target image with the required accuracy. The process is performed for every frame, the resulting parameters are considered to be the orientation elements. The Kalman filter is used for statistical support of the estimation process and real time pose tracking. Finally, the modeling results presented show that the proposed method can be regarded as one means to ensure the algorithmic support of automatic space ships docking.

Retrofit solutions for inland ships : The MoVe IT! approach

NARCIS (Netherlands)

Hekkenberg, R.G.; Thill, C.

2014-01-01

In MoVe IT!, a project in the European 7th framework package, it is investigated how existing European inland cargo ships can be retrofitted in order to improve their economic and environmental performance. In the project, experts from academia worked closely together with five ship owners to

Ship Inspection Strategies: Effects on Maritime Safety and Environmental Protection

NARCIS (Netherlands)

C. Heij (Christiaan); G.E. Bijwaard (Govert); S. Knapp (Sabine)

2010-01-01

textabstractGlobal trade depends for a large part on maritime transport, and safe ships are needed not only to protect precious cargo but also to prevent environmental damage. Flag state and port state authorities spend much effort in ship safety inspections to ensure a minimum safety level and to

Safety analysis report for packaging (SARP) of the Oak Ridge National Laboratory Foamglas Shipping Container

International Nuclear Information System (INIS)

Klima, B.B.; Shappert, L.B.; Seagren, R.D.; Box, W.D.

1979-01-01

An analytical evaluation of the ORNL Foamglas Shipping Container was made to demonstrate its compliance with the regulations governing offsite radioactive material shipping packages. The evaluation encompassed five primary categories: structural integrity, thermal resistance, radiation shielding, nuclear criticality safety, and quality assurance. The results of the evaluation show that the container complies with the applicable regulations

Scientific opinion on the evaluation of substances as acceptable previous cargoes for edible fats and oils

NARCIS (Netherlands)

Knutsen, Helle Katrine; Alexander, Jan; Barregård, Lars; Bignami, Margherita; Brüschweiler, Beat; Ceccatelli, Sandra; Cottrill, Bruce; Dinovi, Michael; Edler, Lutz; Hogstrand, Christer; Hoogenboom, L.A.P.; Nebbia, Carlo; Oswald, Isabelle; Petersen, Annette; Rose, Martin; Roudot, Alain-Claude; Schwerdtle, Tanja; Vollmer, Günter; Wallace, Heather; Grasl-Kraupp, Bettina; Grob, Konrad; Penninks, André; Binaglia, Marco; Roldán Torres, Ruth; Vleminckx, Christiane

2017-01-01

Shipping of edible fats and oils into Europe is permitted in bulk tanks, provided that the previous cargo is included in a positive list. The European Commission requested EFSA to evaluate the acceptability as previous cargoes for fats and oils the substances calcium lignosulphonate, methyl acetate,

SURVEYING, MODELING AND 3D REPRESENTATION OF A WRECK FOR DIVING PURPOSES: CARGO SHIP “VERA”

Directory of Open Access Journals (Sweden)

A. Ktistis

2017-02-01

Full Text Available This paper presents the results from an underwater recording of the stern part of a contemporary cargo-ship wreck. The aim of this survey was to create 3D representations of this wreck mainly for recreational diving purposes. The key points of this paper are: a the implementation of the underwater recording at a diving site; b the reconstruction of a 3d model from data that have been captured by recreational divers; and c the development of a set of products to be used by the general public for the ex situ presentation or for the in situ navigation. The idea behind this project is to define a simple and low cost procedure for the surveying, modeling and 3D representation of a diving site. The perspective of our team is to repeat the proposed methodology for the documentation and the promotion of other diving sites with cultural features, as well as to train recreational divers in underwater surveying procedures towards public awareness and community engagement in the maritime heritage.

Revenue management of air cargo service in theory and practice

Science.gov (United States)

Budiarto, S.; Putro, H. P.; Pradono, P.; Yudoko, G.

2018-05-01

This study examines the air cargo service by comparing existing theories from previous research with the conditions on the ground. The object of the study is focused on the freight forwarder and the airport management. This study reviews the models and results of previous research that will be summarized and used to identify any issues related to the characteristics of air cargo operational services, as well as observing and monitoring literature with airlines, shipping companies, and airport management to explore and see the gap between prior research and implementation of its process in the air cargo service. The first phase in this study is to provide an overview of the air cargo industry. The second phase analyzes the characteristic differences between air cargo services and air passenger operating services. And the third phase is a literary bibliography study of air cargo operations, where the focus is on the studies using quantitative models from the perspective of the object of the study, which is the optimization of revenue management on air cargo services. From the results of the study, which is based on the gap between theory and practice, new research opportunities which are related to management of air cargo service revenue in the form of model development are found by adding booking timelines aspects of cargo that can affect the revenue of cargo airline companies and airports.

Improvements in or relating to storage or shipping containers for fragile objects

International Nuclear Information System (INIS)

1979-01-01

A storage or shipping container for fragile objects such as pellets for use in a laser fusion chamber is described. It comprises a base, a stem having a reduced tip in which a pellet can be mounted and a frangible bulb (glass or plastic) adapted to fit over the stem and be sealed on the base. Protective material (fluid or gas) can be introduced into the bulb. The space within the sealed capsule between the stem and the bulb can be filled with an appropriate gas, solid or liquid to reduce chemical reaction or vibration. A modified container allows several small pellets to be stored or shipped. Several of the containers described can be placed inside a second container which has recesses to take their bases and the surrounding space filled with viscous liquid or solid such as paraffin to reduce shock. (U.K.)

Determination of detailed standards for transportation of radioactive materials by ships

International Nuclear Information System (INIS)

1978-01-01

These provisions are established on the basis of the ''Regulations on the transport and storage of dangerous things by ships''. The terms used hereinafter are according to those used in the Regulations. Radioactive materials, etc., include uranium 233, uranium 235, plutonium 238, plutonium 239, plutonium 241, the compounds of such materials and the substances containing one or two and more of such materials, excluding such materials of not more than 15 grams. The permissible surface density of radioactive materials is 1/100,000 of one microcurie per cm 2 for the radioactive materials emitting alpha-ray and 1/10,000 of one microcurie per cm 2 for the radioactive materials not emitting alpha-ray. For the radioactive materials which can be transported as L type cargo, their quantity of radioactivity is defined in their solid, liquid and gaseous forms. The limit of quantity of such cargo is described in detail in the lists attached. Transporting conditions of A, BM and BU type cargos are specified respectively in the particular sections. (Okada, K.)

46 CFR 32.50-1 - Cargo pumps for tank vessels constructed on or after November 10, 1936-TB/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo pumps for tank vessels constructed on or after... TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Pumps, Piping, and Hose for Cargo Handling § 32.50-1 Cargo pumps for tank vessels constructed on or after November 10, 1936—TB/ALL. On all...

Safety Analysis Report for Packaging (SARP) of the Oak Ridge National Laboratory Foamglas Shipping Container

International Nuclear Information System (INIS)

Klima, B.B.; Shappert, L.B.; Seagren, R.D.; Box, W.D.

1978-05-01

An analytical evaluation of the Oak Ridge National Laboratory (ORNL) Foamglas Shipping Container was made to demonstrate its compliance with the regulations governing offsite radioactive material shipping packages. The evaluation encompassed five primary categories: structural integrity, thermal resistance, radiation shielding, nuclear criticality safety, and quality assurance. The results of the evaluation show that the container complies with the applicable regulations

Validity of scale modeling for large deformations in shipping containers

International Nuclear Information System (INIS)

Burian, R.J.; Black, W.E.; Lawrence, A.A.; Balmert, M.E.

1979-01-01

The principal overall objective of this phase of the continuing program for DOE/ECT is to evaluate the validity of applying scaling relationships to accurately assess the response of unprotected model shipping containers severe impact conditions -- specifically free fall from heights up to 140 ft onto a hard surface in several orientations considered most likely to produce severe damage to the containers. The objective was achieved by studying the following with three sizes of model casks subjected to the various impact conditions: (1) impact rebound response of the containers; (2) structural damage and deformation modes; (3) effect on the containment; (4) changes in shielding effectiveness; (5) approximate free-fall threshold height for various orientations at which excessive damage occurs; (6) the impact orientation(s) that tend to produce the most severe damage; and (7) vunerable aspects of the casks which should be examined. To meet the objective, the tests were intentionally designed to produce extreme structural damage to the cask models. In addition to the principal objective, this phase of the program had the secondary objectives of establishing a scientific data base for assessing the safety and environmental control provided by DOE nuclear shipping containers under impact conditions, and providing experimental data for verification and correlation with dynamic-structural-analysis computer codes being developed by the Los Alamos Scientific Laboratory for DOE/ECT

Necessity of Proper Lashing of Containers on the Ship's Deck as Part of Optimization of the Sea Voyage

Directory of Open Access Journals (Sweden)

Zoran Radišić

2004-03-01

Full Text Available These days we are witnessing an increase of container trafficin general and at sea in particular. In order to economizetheir business the ship owners are building bigger container vesselswhich can carry up to 8000 TEUs (Maersk line and otherbig carriers are following suit. On the drawing board is the vesselof 12000 TEUs from the mentioned ship owner. Obviously,such large quantity of containers requires highly efficient lashingequipment in order to secure them, particularly thosestowed on the deck Under the deck, almost as a rule all contemporarycontainer ships have cell guides as securing devices.Attention in this work is focused on container lashing systemexposed on the ship's deck and the relevant forces acting on thelash system during transportation at sea. Once containers areloaded on the ship's deck they should be safely secured by oneof the lashing systems in order to prevent damage and that is theprincipal task of the lashing equipment engaged within theframe of the lash system. In order to fulfill its objective theforces acting on the container should be properly calculated.The acting forces, their influence and the way of calculatingthem have been explained for all the major ship movementsand suggestions for optimum lashing equipment are given.

Quality assurance measures for spent fuel shipping and storage containers

International Nuclear Information System (INIS)

Droste, B.; Roedel, R.

1987-01-01

Quality assurance measures are to be applied in production and operation to ensure the approved fuel-element-container design specifications. The authors concentrate on the official regulations pertaining to the application of a quality assurance system, on the compliance with design specifications ensured by certified manufacturing tests and in-service inspections. For nodular-cast-iron container bodies, the authors demonstrate the procedure by presenting the contents of the materials data sheet characterizing the material, and the production and test sequence plan for container casting. In addition, they state the quality assurance requirements for interim-storage containers which transgress those stipulated for shipping containers. (orig.) [de

Book Review: Radiation protection and measurement issues related to cargo scanning with accelerator-produced high-energy X rays, NCRP Commentary No. 20

International Nuclear Information System (INIS)

May, Robert

2008-01-01

Having spent roughly the first third of his health physics career on the Norfolk, VA waterfront area, the reviewer was excited to see the NCRP Commentary 20, 'Radiation Protection and Measurements Issues Related to Cargo Scanning with Accelerator Technology'. It signals the advent of the Cargo Advanced Automated Radiography System (CAARS). The waterfront is a border that challenges physical security programs and technology. As Commentary 20 provides in the introduction, waterfront cargo terminals and land border crossings together represent over 300 ports of entry in the USA. Every year, the USA receives over 10 million cargo containers from commercial shipping and a roughly equal amount from land border crossings. While rapidly processing containerized cargo, CAARS will be able to detect small quantities of high atomic number radioactive materials and dense shielding materials used for radioactive gamma ray sources and even illicit human cargo - important concerns for homeland security. It will also be able to detect other contraband such as explosives, weapons and drugs. Section 1 of the Commentary presents an executive summary with NCRP's radiation dose management recommendations and related operational recommendations for effective implementation of CAARS technology in the current regulatory environment.

A wireless sensor tag platform for container security and integrity

Science.gov (United States)

Amaya, Ivan A.; Cree, Johnathan V.; Mauss, Fredrick J.

2011-04-01

Cargo containers onboard ships are widely used in the global supply chain. The need for container security is evidenced by the Container Security Initiative launched by the U.S. Bureau of Customs and Border Protection (CBP). One method of monitoring cargo containers is using low power wireless sensor tags. The wireless sensor tags are used to set up a network that is comprised of tags internal to the container and a central device. The sensor network reports alarms and other anomalies to a central device, which then relays the message to an outside network upon arrival at the destination port. This allows the port authorities to have knowledge of potential security or integrity issues before physically examining the container. Challenges of using wireless sensor tag networks for container security include battery life, size, environmental conditions, information security, and cost among others. PNNL developed an active wireless sensor tag platform capable of reporting data wirelessly to a central node as well as logging data to nonvolatile memory. The tags, operate at 2.4 GHz over an IEEE 802.15.4 protocol, and were designed to be distributed throughout the inside of a shipping container in the upper support frame. The tags are mounted in a housing that allows for simple and efficient installation or removal prior to, during, or after shipment. The distributed tags monitor the entire container volume. The sensor tag platform utilizes low power electronics and provides an extensible sensor interface for incorporating a wide range of sensors including chemical, biological, and environmental sensors.

Shipping container response to three severe railway accident scenarios

International Nuclear Information System (INIS)

Mok, G.C.; Fischer, L.E.; Murty, S.S.; Witte, M.C.

1998-01-01

The probability of damage and the potential resulting hazards are analyzed for a representative rail shipping container for three severe rail accident scenarios. The scenarios are: (1) the rupture of closure bolts and resulting opening of closure lid due to a severe impact, (2) the puncture of container by an impacting rail-car coupler, and (3) the yielding of container due to side impact on a rigid uneven surface. The analysis results indicate that scenario 2 is a physically unreasonable event while the probabilities of a significant loss of containment in scenarios 1 and 3 are extremely small. Before assessing the potential risk for the last two scenarios, the uncertainties in predicting complex phenomena for rare, high- consequence hazards needs to be addressed using a rigorous methodology

46 CFR 32.50-25 - Cargo pumps and piping on tank vessels constructed prior to November 10, 1936-TB/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Cargo pumps and piping on tank vessels constructed prior... SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Pumps, Piping, and Hose for Cargo Handling § 32.50-25 Cargo pumps and piping on tank vessels constructed prior to November 10, 1936—TB/ALL...

Crash testing of nuclear fuel shipping containers

International Nuclear Information System (INIS)

Jefferson, R.M.; Yoshimura, H.R.

1977-08-01

In an attempt to understand the dynamics of extra severe transportation accidents and to evaluate state-of-the-art computational techniques for predicting the dynamic response of shipping casks involved in vehicular system crashes, the Environmental Control Technology Division of ERDA undertook a program with Sandia to investigate these areas. The program encompasses the following distinct major efforts. The first of these utilizes computational methods for predicting the effects of the accident environment and, subsequently, to calculate the damage incurred by a container as the result of such an accident. The second phase involves the testing of 1 / 8 -scale models of transportation systems. Through the use of instrumentation and high-speed motion photography the accident environments and physical damage mechanisms are studied in detail. After correlating the results of these first two phases, a full scale event involving representative hardware is conducted. To date two of the three selected test scenarios have been completed. Results of the program to this point indicate that both computational techniques and scale modeling are viable engineering approaches to studying accident environments and physical damage to shipping casks

Crash testing of nuclear fuel shipping containers

International Nuclear Information System (INIS)

Jefferson, R.M.; Yoshimura, H.R.

1977-12-01

In an attempt to understand the dynamics of extra severe transportation accidents and to evaluate state-of-the-art computational techniques for predicting the dynamic response of shipping casks involved in vehicular system crashes, the Environmental Control Technology Division of ERDA undertook a program with Sandia to investigate these areas. This program, which began in 1975, encompasses the following distinct major efforts. The first of these utilizes computational methods for predicting the effects of the accident environment and, subsequently, to calculate the damage incurred by a container as the result of such an accident. The second phase involves the testing of 1 / 8 -scale models of transportation systems. Through the use of instrumentation and high-speed motion photography, the accident environments and physical damage mechanisms are studied in detail. After correlating the results of these first two phases, a full scale event involving representative hardware is conducted. To date two of the three selected test scenarios have been completed. Results of the program to this point indicate that both computational techniques and scale modeling are viable engineering approaches to studying accident environments and physical damage to shipping casks

Shock and vibration environments for a large shipping container during truck transport (Part II)

International Nuclear Information System (INIS)

Magnuson, C.E.

1978-05-01

Purpose of this study was to obtain vibration and shock data during truck shipment of heavy cargo. These data were for use in determining any trends of vibration and shock environments with increased cargo weight. The new data were obtained on a ''piggyback'' basis during truck transport of 249 100N (56,000-pound) cargo which consisted of a spent fuel container and its supporting structure. The truck was driven from Mercury, Nevada, to Albuquerque, New Mexico. The routes traveled were US 95 from Mercury, Nevada, to Las Vegas, Nevada; US 93 from Las Vegas to Kingman, Arizona; and I-40/US 66 from Kingman to Albuquerque, New Mexico. Speeds varied from very slow to 88 km/hr (55 mph). A comparison of data from similar experiments with cargo weights varying from no-load to this load shows that the zero-to-peak acceleration amplitude levels of vibration are highest when trucks carry relatively light loads. This is true for the longitudinal and vertical axes of the vehicles in most frequency bands and for the transverse axis above 700 Hz. The shock response acceleration amplitudes for heavier cargo weights were less severe above 3 Hz in the vertical axis and higher between 8 and 20 Hz in the transverse axis. The highest acceleration amplitude of shock response in the longitudinal axis below about 20 Hz was produced in a trailer having a spring suspension system and carrying the 249 100N (56,000 pounds) load

Investigating the implications of a new-build hybrid power system for Roll-on/Roll-off cargo ships from a sustainability perspective – A life cycle assessment case study

International Nuclear Information System (INIS)

Ling-Chin, Janie; Roskilly, Anthony P.

2016-01-01

Highlights: • Resources, emissions and impact from manufacture to end of life were estimated. • Operating diesel gensets and disposing metallic scrap were significant processes. • Correlations between fuel consumption and impact categories were identified. • The influence of the end of life scenarios on ecotoxicity potential was studied. • Environmental benefits of the hybrid system were compared and verified. - Abstract: Marine transport has been essential for international trade. Concern for its environmental impact was growing among regulators, classification societies, ship operators, ship owners, and other stakeholders. By applying life cycle assessment, this article aimed to assess the impact of a new-build hybrid system (i.e. an electric power system which incorporated lithium ion batteries, photovoltaic systems and cold-ironing) designed for Roll-on/Roll-off cargo ships. The study was carried out based on a bottom-up integrated system approach using the optimised operational profile and background information for manufacturing processes, mass breakdown and end of life management plans. Resources such as metallic and non-metallic materials and energy required for manufacture, operation, maintenance, dismantling and scrap handling were estimated. During operation, 1.76 × 10 8 kg of marine diesel oil was burned, releasing carbon monoxide, carbon dioxide, particulate matter, hydrocarbons, nitrogen oxides and sulphur dioxide which ranged 5–8 orders of magnitude. The operation of diesel gensets was the primary cause of impact categories that were relevant to particulate matter or respiratory inorganic health issues, photochemical ozone creation, eutrophication, acidification, global warming and human toxicity. Disposing metallic scrap was accountable for the most significant impact category, ecotoxicity potential. The environmental benefits of the hybrid power system in most impact categories were verified in comparison with a conventional power

46 CFR 153.909 - Completing the Cargo Record Book and record retention: Categories A, B, C, and D.

Science.gov (United States)

2010-10-01

... on board and readily available for inspection and copying by the Coast Guard and when the ship is a U... (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS... and record retention: Categories A, B, C, and D. (a) The person in charge of a ship shall ensure that...

Methods for estimating risks to nuclear power plants from shipping

International Nuclear Information System (INIS)

Walker, D.H.; Hartman, M.G.; Robbins, T.R.

1975-01-01

Nuclear power plants sited on land near shipping lanes or offshore can be exposed to potential risks if there is nearby ship or barge traffic which involves the transport of hazardous cargo. Methods that have been developed for estimating the degree of risk are summarized. Of concern are any accidents which could lead to a release or spill of the hazardous cargo, or to an explosion. A probability of occurrence of the order of 10 -7 per year is a general guideline which has been used to judge whether or not the risk from hazards created by accidents is acceptable. This guideline has been followed in the risk assessment discussed in this paper. 19 references

46 CFR 153.903 - Operating a United States ship in special areas: Categories A, B, and C.

Science.gov (United States)

2010-10-01

... NLS residue in a special area unless— (a) The ship's Certificate of Inspection is endorsed in... 46 Shipping 5 2010-10-01 2010-10-01 false Operating a United States ship in special areas... (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS...

A NUMERICAL APPLICATION TO PREDICT THE RESISTANCE AND WAVE PATTERN OF KRISO CONTAINER SHIP

OpenAIRE

Yavuz Hakan Ozdemir; Taner Cosgun; Ali Dogrul; Boris Barlas

2016-01-01

In this study, the computational results for KRISO Container Ship (KCS) are presented. CFD analyses are performed to simulate free surface flow around KCS by using RANS approach with success. Also the complicated turbulent flow zone behind the ship is well simulated. The RANS equations and the non-linear free surface boundary conditions are discretized by means of a finite volume scheme. The numerical methodology is found to be appropriate for simulating the turbulent flow around a ship in or...

Criticality safety evaluation of a type B enriched uranium shipping container

International Nuclear Information System (INIS)

Hopper, C.M.

1978-01-01

The Oak Ridge Y-12 Plant Model DT-14 container was developed to replace and extend the enriched uranium shipping capabilities of the USA/5765/BF Vermiculite shipping container. This work was accomplished to comply with the DOE Immediate Action Directive Number 0529-02 for ''Phasing out the use of loose or bagged Vermiculite packaging material as a thermal shield and shock absorber in radioactive material packages''. The Model DT-14 is fabricated from a Specification 17H 30-gallon drum, cane fiberboard insulation, and a steel inner containment vessel (159 mm dia by 390 mm height). The single-package and array analyses are based upon results of the multigroup Monte Carlo criticality program, KENO, utilizing 16-energy-group Hansen-Roach, and Knight modified 238 U cross sections. The program and cross sections are considered well established on the basis of their success in calculating a large variety of critical experiments. Validation results show that a calculated neutron multiplication factor plus two standard deviations equal to 0.970 or greater must be considered critical, and all lower values may be considered safe

Sunken ships and a long-lost port

Digital Repository Service at National Institute of Oceanography (India)

Tripati, S.; Sundaresh.; Gaur, A; Vora, K.H.

armed Portuguese sailing ship, went down at Sunchi Reef about 400 years ago; the second vessel, carrying cargo for a Basel mission company based in India, went down at St. George’s Reef, either in 1865 or some time thereafter. What goods where...

Development of efficiency module of organization of Arctic sea cargo transportation with application of neural network technologies

Science.gov (United States)

Sobolevskaya, E. Yu; Glushkov, S. V.; Levchenko, N. G.; Orlov, A. P.

2018-05-01

The analysis of software intended for organizing and managing the processes of sea cargo transportation has been carried out. The shortcomings of information resources are presented, for the organization of work in the Arctic and Subarctic regions of the Far East: the lack of decision support systems, the lack of factor analysis to calculate the time and cost of delivery. The architecture of the module for calculating the effectiveness of the organization of sea cargo transportation has been developed. The simulation process has been considered, which is based on the neural network. The main classification factors with their weighting coefficients have been identified. The architecture of the neural network has been developed to calculate the efficiency of the organization of sea cargo transportation in Arctic conditions. The architecture of the intellectual system of organization of sea cargo transportation has been developed, taking into account the difficult navigation conditions in the Arctic. Its implementation will allow one to provide the management of the shipping company with predictive analytics; to support decision-making; to calculate the most efficient delivery route; to provide on demand online transportation forecast, to minimize the shipping cost, delays in transit, and risks to cargo safety.

A heuristic and hybrid method for the tank allocation problem in maritime bulk shipping

DEFF Research Database (Denmark)

Vilhelmsen, Charlotte; Larsen, Jesper; Lusby, Richard Martin

2016-01-01

In bulk shipping, ships often have multiple tanks and carry multiple inhomogeneous products at a time. When operating such ships it is therefore a major challenge to decide how to best allocate cargoes to available tanks while taking into account tank capacity, safety restrictions, ship stability...... finding a feasible solution. We have developed a heuristic that can efficiently find feasible cargo allocations. Computational results show that it can solve 99 % of the considered instances within 0.4 s and all of them if allowed longer time. We have also modified an optimality based method from...... the literature. The heuristic is much faster than this modified method on the vast majority of considered instances. However, the heuristic struggles on two instances which are relatively quickly solved by the modified optimality based method. These two methods therefore complement each other nicely and so, we...

A Heuristic and Hybrid Method for the Tank Allocation Problem in Maritime Bulk Shipping

DEFF Research Database (Denmark)

Vilhelmsen, Charlotte; Larsen, Jesper; Lusby, Richard Martin

In bulk shipping, ships often have multiple tanks and carry multiple inhomogeneous products at a time. When operating such ships it is therefore a major challenge to decide how to best allocate cargoes to available tanks while taking into account tank capacity, safety restrictions, ship stability...... finding a feasible solution. We have developed a heuristic that can efficiently find feasible cargo allocations. Computational results show that it can solve 99% of the considered instances within 0.4 seconds and all of them if allowed longer time. We have also modified an optimality based method from...... the literature. The heuristic is much faster than this modified method on the vast majority of considered instances. However, the heuristic struggles on two instances which are relatively quickly solved by the modified optimality based method. These two methods therefore complement each other nicely and so, we...

Understanding X-ray cargo imaging

International Nuclear Information System (INIS)

Chen Gongyin

2005-01-01

Cargo imaging is the field of imaging large objects, usually cargo containers, trains, trucks or boats. Transmission imaging with photons, especially X-rays of up to 9 MV is the dominant current technique, providing compelling details of the contents of objects this large. This paper discusses the physics aspects of a good X-ray cargo imaging system. The basic performance requirements, such as penetration, contrast and resolution and the components of a cargo imaging system are introduced. The imaging process is divided in this paper into three stages: forming information (probing the object), recording information and presenting information (image display). Their impact on performance is analyzed

A NUMERICAL APPLICATION TO PREDICT THE RESISTANCE AND WAVE PATTERN OF KRISO CONTAINER SHIP

Directory of Open Access Journals (Sweden)

Yavuz Hakan Ozdemir

2016-06-01

Full Text Available In this study, the computational results for KRISO Container Ship (KCS are presented. CFD analyses are performed to simulate free surface flow around KCS by using RANS approach with success. Also the complicated turbulent flow zone behind the ship is well simulated. The RANS equations and the non-linear free surface boundary conditions are discretized by means of a finite volume scheme. The numerical methodology is found to be appropriate for simulating the turbulent flow around a ship in order to estimate ship total resistance and free surface. By the numerical results, total resistance is calculated for the ship model and the result is satisfactory with regard to the experimental one. As a result of well captured free surface, the wave elevation on/around the hull is compared with the experimental results.

Criticality safety evaluation of Rocky Flats Plant one-gallon shipping containers

International Nuclear Information System (INIS)

Shaw, M.E.

1991-12-01

Criticality safety calculations have been performed to provide an analytical basis for handling, storage and transport of Rocky Flats Plant (RFP) one-gallon shipping containers. A mass limit was establish for metal (solid uranium or plutonium) and slurries (undissolved U or Pu solids in a ''mud,'' ''sludge,'' or ''slurry''). A separate volume limit was developed for plutonium solutions (liquids, either aqueous or organic, containing no visible undissolved solids)

Criticality safety evaluation of Rocky Flats Plant one-gallon shipping containers

Energy Technology Data Exchange (ETDEWEB)

Shaw, M.E.

1991-12-01

Criticality safety calculations have been performed to provide an analytical basis for handling, storage and transport of Rocky Flats Plant (RFP) one-gallon shipping containers. A mass limit was establish for metal (solid uranium or plutonium) and slurries (undissolved U or Pu solids in a ``mud,`` ``sludge,`` or ``slurry``). A separate volume limit was developed for plutonium solutions (liquids, either aqueous or organic, containing no visible undissolved solids).

The Costs of Container Transport Flow Between Far East and Serbia Using Different Liner Shipping Services

Directory of Open Access Journals (Sweden)

Rajkovic Radoslav

2015-11-01

Full Text Available Liner shipping is the most efficient mode of transport for goods. International liner shipping is a sophisticated network of regularly scheduled services that transports goods from anywhere in the world to anywhere in the world at low cost and with greater energy efficiency than any other form of international transportation. Liner shipping connects countries, markets, businesses and people, allowing them to buy and sell goods on a scale not previously possible. Today, the liner shipping industry transports goods representing approximately one-third of the total value of global trade. Ocean shipping contributes significantly to international stability and security. Considering the large and constant struggle in the market in terms of competitive pricing of products, a very important and indispensable role represents the container transport with a clear task to define the final price of the product. This paper analyzes the costs of container transport flow between Far East and Serbia, using different liner shipping services, observing the six world’s largest container operators (Maersk Line, Mediterranean Shipping Company, CMA CGM, Evergreen Line, China Ocean Shipping Company and Hapag-Lloyd and inland (truck-rail-river transport corridors. These corridors include distance between selected Mediterranean ports (Koper, Rijeka, Bar, Thessaloniki, Constanta and Serbia. As a result, in this paper is considered a mathematical model that provides a comparative analysis of transportation costs on the different routes. It is observed already existing transport routes and it is also given hypothetical review to the development of new transport routes. The main goal of this research is to provide an optimal route with lowest transportation cost during container transport. Selection of the best route in the intermodal network is a very difficult and complex task. The costs in all modes of transport and the quality of their services are not constant

SH2 domain-containing inositol 5-phosphatase (SHIP2) regulates de-novo lipogenesis and secretion of apoB100 containing lipoproteins in HepG2 cells.

Science.gov (United States)

Gorgani-Firuzjaee, Sattar; Khatami, Shohreh; Adeli, Khosrow; Meshkani, Reza

2015-09-04

Hepatic de-novo lipogenesis and production of triglyceride rich VLDL are regulated via the phosphoinositide 3-kinase cascade, however, the role of a negative regulator of this pathway, the SH2 domain-containing inositol 5-phosphatase (SHIP2) in this process, remains unknown. In the present study, we investigated the molecular link between SHIP2 expression and metabolic dyslipidemia using overexpression or suppression of SHIP2 gene in HepG2 cells. The results showed that overexpression of the wild type SHIP2 gene (SHIP2-WT) led to a higher total lipid content (28%) compared to control, whereas overexpression of the dominant negative SHIP2 gene (SHIP2-DN) reduced total lipid content in oleate treated cells by 40%. Overexpression of SHIP2-WT also led to a significant increase in both secretion of apoB100 containing lipoproteins and de-novo lipogenesis, as demonstrated by an enhancement in secreted apoB100 and MTP expression, increased intra and extracellular triglyceride levels and enhanced expression of lipogenic genes such as SREBP1c, FAS and ACC. On the other hand, overexpression of the SHIP2-DN gene prevented oleate-induced de-novo lipogenesis and secretion of apoB100 containing lipoproteins in HepG2 cells. Collectively, these findings suggest that SHIP2 expression level is a key determinant of hepatic lipogenesis and lipoprotein secretion, and its inhibition could be considered as a potential target for treatment of dyslipidemia. Copyright © 2015 Elsevier Inc. All rights reserved.

Probabilistic Damage Stability Calculations for Ships

DEFF Research Database (Denmark)

Jensen, Jørgen Juncher

1996-01-01

The aim of these notes is to provide background material for the present probabilistic damage stability rules fro dry cargo ships.The formulas for the damage statistics are derived and shortcomings as well as possible improvements are discussed. The advantage of the definiton of fictitious...... compartments in the formulation of a computer-based general procedure for probabilistic damaged stability assessment is shown. Some comments are given on the current state of knowledge on the ship survivability in damaged conditions. Finally, problems regarding proper account of water ingress through openings...

Time constrained liner shipping network design

DEFF Research Database (Denmark)

Karsten, Christian Vad; Brouer, Berit Dangaard; Desaulniers, Guy

2017-01-01

We present a mathematical model and a solution method for the liner shipping network design problem. The model takes into account coordination between vessels and transit time restrictions on the cargo flow. The solution method is an improvement heuristic, where an integer program is solved...... iteratively to perform moves in a large neighborhood search. Our improvement heuristic is applicable as a real-time decision support tool for a liner shipping company. It can be used to find improvements to the network when evaluating changes in operating conditions or testing different scenarios...

Special closures for steel drum shipping containers

International Nuclear Information System (INIS)

Bonzon, L.L.; Otts, J.V.

1976-01-01

The objective of this program was to develop special lid closures for typical, steel drum, radioactive material shipping containers. Previous experience and testing had shown that the existing container was adequate to withstand the required environmental tests for certification, but that the lid and closure were just marginally effective. Specifically, the lid closure failed to consistently maintain a tight seal between the container and the lid after drop tests, thus causing the package contents to be vulnerable in the subsequent fire test. Recognizing the deficiency, the United States Energy Research and Development Administration requested the development of new closure(s) which would: (1) be as strong and resistant to a drop as the bottom of the container; (2) have minimal economic impact on the overall container cost; (3) maximize the use of existing container designs; (4) consider crush loads; and (5) result in less dependence on personnel and loading procedures. Several techniques were evaluated and found to be more effective than the standard closure mechanism. Of these, three new closure techniques were designed, fabricated, and proven to be structurally adequate to provide containment when a 454-kg drum was drop tested from 9.14-m onto an unyielding surface. The three designs were: (1) a 152-mm long lid extension or skirt welded to the standard drum lid, (2) a separate inner lid, with 152-mm long skirt and (3) C-clamps used at the container-lid interface. Based upon structural integrity, economic impact, and minimal design change, the lid extension is the recommended special closure

Cargo transport by sea and road - Technical and economical environmental factors

DEFF Research Database (Denmark)

Kristensen, Hans Otto Holmegaard

2006-01-01

This paper presents the background for a method of calculating the energy demand for different ship types using only a relatively few, but important parameters. It is an empirical method, based on a statistical analysis of the main parameters of different ship types in order to establish represen......This paper presents the background for a method of calculating the energy demand for different ship types using only a relatively few, but important parameters. It is an empirical method, based on a statistical analysis of the main parameters of different ship types in order to establish......)). >> By combining the statistical analysis with a subsequent power prediction, it has been possible to develop a method which can calculate the energy consumption as a function of only 3 general parameters, namely the size of the ship (more precisely the capacity), the ship's speed and the average cargo utilization...

Methodology of Day-To-Day Ship Costs Assessment

Directory of Open Access Journals (Sweden)

Milojka Počuča

2006-09-01

Full Text Available The paper presents a methodology of assessing the day-to-day fixed costs of maritime cargo ships. The authoress refersthe reader to factors that affect the amount affixed daily costsand the day-to-day voyage costs of ships. In the last chapter thepaper presents an estimation of the average daily fixed costsand day-to-day voyage costs of ships per type and size for theyear 2003. Besides particular explanations, the reader is refe"ed to data bases that authentically impart data on the structureof maritime fleets and their technical characteristics, aswell as databases on prices and costs in maritime transport.

Shipping container for a bottle of radioactive material

International Nuclear Information System (INIS)

Soldan, D.W.

1975-01-01

A shipping container for a bottle of radioactive material comprises a can having a cavity therein for receiving the bottle, a screw cap for the can and the cavity, and an annular bottle retainer extending downwardly in the cavity from its upper end having an outwardly extending flange at its upper end clamped between the cap and the upper end of the cavity and an inwardly extending flange at its lower end receiving the neck of the bottle. The cap carries a sponge to absorb spillage from the bottle. (U.S.)

Criticality safety evaluation of Rocky Flats Plant one-gallon shipping containers

Energy Technology Data Exchange (ETDEWEB)

Shaw, M.E.

1991-12-01

Criticality safety calculations have been performed to provide an analytical basis for handling, storage and transport of Rocky Flats Plant (RFP) one-gallon shipping containers. A mass limit was establish for metal (solid uranium or plutonium) and slurries (undissolved U or Pu solids in a mud,'' sludge,'' or slurry''). A separate volume limit was developed for plutonium solutions (liquids, either aqueous or organic, containing no visible undissolved solids).

Assessment of stress-strain data suitable for finite-element elastic--plastic analysis of shipping containers

International Nuclear Information System (INIS)

Rack, H.J.; Knorovsky, G.A.

1978-09-01

Stress-strain data which describes the influence of strain rate and temperature on the mechanical response of materials presently being used for light water reactor fuel shipping containers have been assembled. Selection of data has been limited to that which is suitable for use in finite-element elastic--plastic analysis of shipping containers (e.g., they must include complete material history profiles). Based on this information, recommendations have been made for further work which is required to complete the necessary data base

A service flow model for the liner shipping network design problem

DEFF Research Database (Denmark)

Plum, Christian Edinger Munk; Pisinger, David; Sigurd, Mikkel M.

2014-01-01

. The formulation alleviates issues faced by arc flow formulations with regards to handling multiple calls to the same port. A problem which has not been fully dealt with earlier by LSNDP formulations. Multiple calls are handled by introducing service nodes, together with port nodes in a graph representation...... of the network and a penalty for not flowed cargo. The model can be used to design liner shipping networks to utilize a container carrier’s assets efficiently and to investigate possible scenarios of changed market conditions. The model is solved as a Mixed Integer Program. Results are presented for the two...

Modeling Liner Shipping Service Selection and Container Flows using a Multi-layer Network

DEFF Research Database (Denmark)

Karsten, Christian Vad; Balakrishnan, Anant

We introduce a new formulation for the tactical planning problem facing container shipping companies of selecting the best subset of sailing routes from a given pool of candidate routes so as to maximize profit. Since most containers are sent directly or transshipped at most twice in current liner...

Improvement of Efficiency of Transportation in Harbor Physical Distribution Considering Inland Carriage

Science.gov (United States)

Hino, Hisato; Hoshino, Satoshi; Fujisawa, Tomoharu; Maruyama, Shigehisa; Ota, Jun

Currently, container ships move cargo with minimal participation from external trucks. However, there is slack time between the departure of container ships and the completion of cargo handling by container ships without the participation of external trucks; therefore, external trucks can be used to move cargo without delaying the departure time. In this paper, we propose a solution involving the control algorithms of transfer cranes (TCs) because the efficiency of yard operations depends largely on the productivity of TCs. TCs work according to heuristic rules using the forecasted arrival times of internal and external trucks. Simulation results show that the proposed method can reduce the waiting time of external trucks and meet the departure time of container ships.

Marine pollution : progress made to reduce marine pollution by cruise ships, but important issues remain

Science.gov (United States)

2000-02-01

From 1993 through 1998-the most recent year for which data are available-cargo ships, tankers, cruise ships, and other commercial vessels registered, or "flagged," in foreign countries have been involved in almost 2,400 confirmed cases of illegally d...

78 FR 68784 - Cargo Securing Manuals

Science.gov (United States)

2013-11-15

.../Circ.) 1352 (``Cargo Stowage and Securing (CSS Code) Annex 14 Guidance on Providing Safe Working... Providing Safe Working Conditions for the Securing of Containers'') of the IMO 2010 CSS Code. A cargo safe.... Indian Tribal Governments K. Energy Effects L. Technical Standards M. Environment I. Public Participation...

46 CFR 154.1850 - Entering cargo handling spaces.

Science.gov (United States)

2010-10-01

..., compressors, and compressor motors. (2) Gas-dangerous cargo control spaces. (3) Other spaces containing cargo... cargo handling spaces. (a) The master shall ensure that the ventilation system under § 154.1200 is in... ventilation system, is posted outside of each space under paragraph (a) of this section. (c) The master shall...

New egg shipping container for decentralized medfly sterile male pupae production

International Nuclear Information System (INIS)

Kozanek, M.; Vidlicka, L.; Paskova, M.; Eyles, D.K.

2006-01-01

This paper describes a new double-walled container with an internal shelf system for the shipment of medfly eggs. It allows the eggs to be packed in plastic bags for shipment without the addition of any transportation medium. The size of this container can be adapted to the volume of eggs required. This container can maintain a constant internal temperature for 72 hours. Simulation of shipping conditions for 72 hours found no negative influence on the quality of eggs. The cost of the new container is comparable or even lower than the cost of commonly available commercial containers. The main advantages of this egg shipment container are: a) good thermo-insulation properties, b) variable size and c) low cost. (author)

New egg shipping container for decentralized medfly sterile male pupae production

Energy Technology Data Exchange (ETDEWEB)

Kozanek, M.; Vidlicka, L.; Paskova, M., E-mail: milan.kozanek@savba.s, E-mail: lubomir.vidlicka@savba.s, E-mail: martina.paskova@savba.s [Slovak Academy of Sciences, Bratislava (Slovakia). Inst. of Zoology; Moravek, I., E-mail: Moravek@kvs.sif.stuba.s [Slovak Technical Univ., Bratislava (Slovakia). Fac. of Mechanical Engineering; Quintal, C., E-mail: celioquintal.sra@gov-madeira.p [Programa Madeira-Med, Madeira (Portugal); Eyles, D.K., E-mail: dke@liverpool.ac.u [The University of Liverpool, Liverpool (United Kingdom). School of Biological Sciences

2006-07-01

This paper describes a new double-walled container with an internal shelf system for the shipment of medfly eggs. It allows the eggs to be packed in plastic bags for shipment without the addition of any transportation medium. The size of this container can be adapted to the volume of eggs required. This container can maintain a constant internal temperature for 72 hours. Simulation of shipping conditions for 72 hours found no negative influence on the quality of eggs. The cost of the new container is comparable or even lower than the cost of commonly available commercial containers. The main advantages of this egg shipment container are: a) good thermo-insulation properties, b) variable size and c) low cost. (author)

Container Shipping Network Efficiency Comparison in Indonesia: Nusantara Pendulum and Sea Tollway

Directory of Open Access Journals (Sweden)

Hafida Fahmiasari

2017-07-01

Full Text Available The disparity of the trading activities in Indonesia has triggered Indonesia Port Corporation to come up with the plan of Nusantara Pendulum, the future network of container shipping in Indonesia. The Sea Tollway plan is the modification of Nusantara Pendulum that is also envisioned by Indonesia President for Indonesia future backbone container plan. Both networks were designed to increase Indonesia container shipping flow from west to east and vice versa like a pendulum, thus results the reduced transport cost. This paper depicts the comparison of network efficiency analysis between these networks: Nusantara Pendulum, Sea Tollway, and the existing network. Two main methods that are used are Nagurney-Qiang and Jenelius-Peterson-Mattson. Mainly, these two methods use the efficiency calculation by considering parameters of demand (goods flow between each region and maritime transportation cost. It is concluded afterward that: 1 Sea Tollway is 8% more efficient than Nusantara Pendulum; 2 Sea Tollway and Nusantara Pendulum are ten times more efficient than current network; 3 Eastern ports in Indonesia (Bitung and Sorong urgently requisite a development.

The Nuclear Car Wash: Neutron interrogation of cargo containers to detect hidden SNM

Science.gov (United States)

Hall, J. M.; Asztalos, S.; Biltoft, P.; Church, J.; Descalle, M.-A.; Luu, T.; Manatt, D.; Mauger, G.; Norman, E.; Petersen, D.; Pruet, J.; Prussin, S.; Slaughter, D.

2007-08-01

LLNL is actively involved in the development of advanced technologies for use in detecting threats in sea-going cargo containers, particularly the presence of hidden special nuclear materials (SNM). The "Nuclear Car Wash" (NCW) project presented here uses a high-energy (En ≈ 3.5-7.0 MeV) neutron probe to scan a container and then takes high-energy (Eγ ⩾ 2.5 MeV), β-delayed γ-rays emitted during the subsequent decay of any short-lived, neutron-induced fission products as a signature of fissionable material. The components of the proposed system (e.g. neutron source, gamma detectors, etc.) will be discussed along with data processing schemes, possible threat detection metrics and potential interference signals. Results from recent laboratory experiments using a prototype system at LLNL will also be presented.

The Nuclear Car Wash: Neutron interrogation of cargo containers to detect hidden SNM

International Nuclear Information System (INIS)

Hall, J.M.; Asztalos, S.; Biltoft, P.; Church, J.; Descalle, M.-A.; Luu, T.; Manatt, D.; Mauger, G.; Norman, E.; Petersen, D.; Pruet, J.; Prussin, S.; Slaughter, D.

2007-01-01

LLNL is actively involved in the development of advanced technologies for use in detecting threats in sea-going cargo containers, particularly the presence of hidden special nuclear materials (SNM). The 'Nuclear Car Wash' (NCW) project presented here uses a high-energy (E n ∼ 3.5-7.0 MeV) neutron probe to scan a container and then takes high-energy (E γ ≥ 2.5 MeV), β-delayed γ-rays emitted during the subsequent decay of any short-lived, neutron-induced fission products as a signature of fissionable material. The components of the proposed system (e.g. neutron source, gamma detectors, etc.) will be discussed along with data processing schemes, possible threat detection metrics and potential interference signals. Results from recent laboratory experiments using a prototype system at LLNL will also be presented

Complexity in human transportation networks: a comparative analysis of worldwide air transportation and global cargo-ship movements

Science.gov (United States)

Woolley-Meza, O.; Thiemann, C.; Grady, D.; Lee, J. J.; Seebens, H.; Blasius, B.; Brockmann, D.

2011-12-01

We present a comparative network-theoretic analysis of the two largest global transportation networks: the worldwide air-transportation network (WAN) and the global cargo-ship network (GCSN). We show that both networks exhibit surprising statistical similarities despite significant differences in topology and connectivity. Both networks exhibit a discontinuity in node and link betweenness distributions which implies that these networks naturally segregate into two different classes of nodes and links. We introduce a technique based on effective distances, shortest paths and shortest path trees for strongly weighted symmetric networks and show that in a shortest path tree representation the most significant features of both networks can be readily seen. We show that effective shortest path distance, unlike conventional geographic distance measures, strongly correlates with node centrality measures. Using the new technique we show that network resilience can be investigated more precisely than with contemporary techniques that are based on percolation theory. We extract a functional relationship between node characteristics and resilience to network disruption. Finally we discuss the results, their implications and conclude that dynamic processes that evolve on both networks are expected to share universal dynamic characteristics.

Research on bulk-cargo-port berth assignment based on priority of resource allocation

Directory of Open Access Journals (Sweden)

Chunfang Guo

2013-03-01

Full Text Available Purpose: The purpose of this paper is to propose a Priority of Resource Allocation model about how to utilize the resources of the port efficiently, through the improvement of traditional ant colony algorithm, the ship-berth matching relation constraint matrix formed by ontology reasoning. Design/methodology/approach: Through questionnaires?Explore factor analysis (EFA and principal component analysis, the authors extract the importance of the goods, the importance of customers, and type of trade as the main factors of the ship operating priority. Then the authors combine berth assignment problem with the improved ant colony algorithm, and use the model to improve ship scheduling quality. Finally, the authors verify the model with physical data in a bulk-cargo-port in China. Findings: Test by the real data of bulk cargo port, it show that ships’ resource using priority and the length of waiting time are consistent; it indicates that the priority of resource allocation play a prominent role in improving ship scheduling quality. Research limitations: The questionnaires is limited in only one port group, more  related Influence factors should be considered to extend the conclusion. Practical implications: The Priority of Resource Allocation model in this paper can be used to improve the efficiency of the dynamic berth assignment. Originality: This paper makes the time of ship in port minimized as the optimization of key indicators and establishes a dynamic berth assignment model based on improved ant colony algorithm and the ontology reasoning model.

Product development of Indian cargo scanner

International Nuclear Information System (INIS)

2017-01-01

A cargo scanner is required for nonintrusive screening of suspected cargo containers in trade, using high energy X-ray, to detect any mis-declarations, contraband goods concealment or hidden ammunition or explosives. The cargo scanners help authorities to process large number of suspected cargo with a high level of confidence with other additional benefit of faster clearance, minimised intrusive inspection and generating secured digital record of the process. BARC is in process of developing Indian Cargo Scanner with indigenous X-ray source. Proof of concept and conformance of the results to the international standards has been demonstrated in laboratory. Full scale equipment named as Portal scanner shall be demonstrated at Gamma field Trombay in year 2017. Subsequently the technology transfer may be done to a suitable Indian vendor

Fast neutron radiography scanner for the detection of contraband in air cargo containers

International Nuclear Information System (INIS)

Eberhardt, J.E.; Rainey, S.; Stevens, R.J.; Sowerby, B.D.; Tickner, J.R.

2005-01-01

There is a growing need to rapidly scan bulk air cargo for contraband such as illicit drugs and explosives. The Commonwealth Science and Industrial Research Organisation (CSIRO) have been working with Australian Customs Service to develop a scanner capable of directly scanning airfreight containers in 1-2 minutes without unpacking. The scanner combines fast neutron and gamma-ray radiography to provide high-resolution images that include information on material composition. A full-scale prototype scanner has been successfully tested in the laboratory and a commercial-scale scanner is due to be installed at Brisbane airport in 2005

Fast neutron radiography scanner for the detection of contraband in air cargo containers

Energy Technology Data Exchange (ETDEWEB)

Eberhardt, J.E. [CSIRO Minerals, Private Mail Bag 5, Menai, NSW 2234 (Australia); Rainey, S. [CSIRO Minerals, Private Mail Bag 5, Menai, NSW 2234 (Australia); Stevens, R.J. [CSIRO Minerals, Private Mail Bag 5, Menai, NSW 2234 (Australia); Sowerby, B.D. [CSIRO Minerals, Private Mail Bag 5, Menai, NSW 2234 (Australia)]. E-mail: brian.sowerby@csiro.au; Tickner, J.R. [CSIRO Minerals, Private Mail Bag 5, Menai, NSW 2234 (Australia)

2005-08-01

There is a growing need to rapidly scan bulk air cargo for contraband such as illicit drugs and explosives. The Commonwealth Science and Industrial Research Organisation (CSIRO) have been working with Australian Customs Service to develop a scanner capable of directly scanning airfreight containers in 1-2 minutes without unpacking. The scanner combines fast neutron and gamma-ray radiography to provide high-resolution images that include information on material composition. A full-scale prototype scanner has been successfully tested in the laboratory and a commercial-scale scanner is due to be installed at Brisbane airport in 2005.

46 CFR 32.50-35 - Remote manual shutdown for internal combustion engine driven cargo pump on tank vessels-TB/ALL.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Remote manual shutdown for internal combustion engine... for Cargo Handling § 32.50-35 Remote manual shutdown for internal combustion engine driven cargo pump on tank vessels—TB/ALL. (a) Any tank vessel which is equipped with an internal combustion engine...

Regulations concerning marine transport and storage of dangerous things (abridged)

International Nuclear Information System (INIS)

1987-01-01

This report shows the Ordinances No.84 (1967) and No.30 (1957) of the Ministry of transport. The Ordinance No.84 has been published in detail elsewhere. The provisions concerning shipping transport and storage of dangerous substances deal with isolation of each dangerous substance, method for loading (cleaning of container, etc.), certificate for ship for transporting dangerous substances, renewal of certificate for ship for transporting dangerous substances, return of certificate, fee (for renewal and reissue of certificate), definition of terms, type of radioactive cargo (L-type cargo, A-type cargo, BM-type cargo, BU type cargo), transport of radioactive substances, type of fissionable cargo (Type I, Type II and Type III), confirmation of safety concerning radioactive cargo (conformity to standards, inspection, approval, etc.), limit of cargo volume, transport index, marking (type of cargo), confirmation of safety of transport, inspection of contamination, notice of transport, special measures, inspection of cargo (radioactive substances), requirements for container and package, etc. (Nogami, K.)

Hydro-structural issues in the design of ultra large container ships

Directory of Open Access Journals (Sweden)

Sime Malenica

2014-12-01

Full Text Available The structural design of the ships includes two main issues which should be checked carefully, namely the extreme structural response (yielding & buckling and the fatigue structural response. Even if the corresponding failure modes are fundamentally different, the overall methodologies for their evaluation have many common points. Both issues require application of two main steps: deterministic calculations of hydro-structure interactions for given operating conditions on one side and the statistical post-processing in order to take into account the lifetime operational profile, on the other side. In the case of ultra large ships such as the container ships and in addition to the classical quasi-static type of structural responses the hydroelastic structural response becomes important. This is due to several reasons among which the following are the most important: the increase of the flexibility due to their large dimensions (Lpp close to 400 m which leads to the lower structural natural frequencies, very large operational speed (20 knots and large bow flare (increased slamming loads. The correct modeling of the hydroelastic ship structural response, and its inclusion into the overall design procedure, is significantly more complex than the evaluation of the quasi static structural response. The present paper gives an overview of the different tools and methods which are used in nowadays practice.

The conceptual solutions concerning decommissioning and dismantling of Russian civil nuclear powered ships

International Nuclear Information System (INIS)

Kulikov, Konstantin N.; Nizamutdinov, Rinat A.; Abramov, Andrey N.

2013-01-01

From 1959 up to 1991 nine civil nuclear powered ships were built in Russia: eight ice-breakers and one lash lighter carrier (cargo ship). At the present time three of them were taking out of service: ice-breaker 'Lenin' is decommissioned as a museum and is set for storage in the port of Murmansk, nuclear ice-breakers 'Arktika' and 'Sibir' are berthing. The ice-breakers carrying rad-wastes appear to be a possible source of radiation contamination of Murmansk region and Kola Bay because the ship long-term storage afloat has the negative effect on hull's structures. As the result of this under the auspices of the Federal Targeted Program 'Nuclear and Radiation Safety of Russia for 2008 and the period until 2015' the conception and projects of decommissioning of nuclear-powered ships are developed by the State corporation Rosatom with the involvement of companies of United Shipbuilding Corporation. In developing the principal provisions of conception of decommissioning and dismantling of icebreakers the technical and economic assessment of dismantling options in ship-repairing enterprises of North-West of Russia was performed. The paper contains description of options, research procedure, analysis of options of decommissioning and dismantling of nuclear ice-breakers, taking into account the principle of optimization of potential radioactive effect to personnel, human population and environment. The report's conclusions contain the recommendations for selection of option for development of nuclear icebreaker decommissioning and dismantling projects. (authors)

Study of accident environment during sea transport of nuclear material: Analysis of an engine room fire on a purpose built ship. Annex 5

International Nuclear Information System (INIS)

Yamamoto, K.; Shibata, H.; Ouchi, Y.; Kitamura, T.; Ito, T.; Hohnstreiter, G.F.; Pierce, J.D.; Koski, J.A.; Dukart, R.J.

2001-01-01

The program goal was to show that the IAEA safe transport regulations adequately cover the thermal effects of an engine-room fire on plutonium transportation packages stowed aboard a purpose built ship. The packages are stored in transportation containers located in a cargo hold of the ship. This study addressed the heat transfer from an engine-room fire that could heat and evaporate water out of the water-filled bulkhead and the resulting temperature conditions around the packages and inside the packages near their elastomeric seals. This study was designed to estimate the thermal response of a plutonium package in the hold of a purpose built ship during a shipboard fire, and furthermore, to confirm the sufficiency and adequacy of the current IAEA transport regulation

Development of methodology for certification of Type B shipping containers using analytical and testing techniques

International Nuclear Information System (INIS)

Sharp, R.R.; Varley, D.T.

1992-01-01

The Analysis and Testing Group (WX-11) of the Design Engineering Division at Los Alamos National Laboratory (LANL) is developing methodology for designing and providing a basis for certification of Type B shipping containers. This methodology will include design, analysis, testing, fabrication, procurement, and obtaining certification of the Type B containers, allowing usage in support of the United States Department of Energy programs. While all aspects of the packaging development are included in this methodology, this paper focuses on the use of analysis and testing techniques for enhancing the design and providing a basis for certification. This methodology is based on concurrent engineering principles. Multidisciplinary teams within LANL are responsible for the design and certification of specific Type B Radioactive Material Shipping Containers. These teams include personnel with the various backgrounds and areas of expertise required to support the design, testing, analysis and certification tasks. To demonstrate that a package can pass all the performance requirements, the design needs to be characterized as completely as possible. Understanding package responses to the various environments and how these responses influence the effectiveness of the packaging requires expertise in several disciplines. In addition to characterizing the shipping container designs, these multidisciplinary teams should be able to provide insight into improving new package designs

Experimental studies of dynamic impact response with scale models of lead shielded radioactive material shipping containers

International Nuclear Information System (INIS)

Robinson, R.A.; Hadden, J.A.; Basham, S.J.

1978-01-01

Preliminary experimental studies of dynamic impact response of scale models of lead-shielded radioactive material shipping containers are presented. The objective of these studies is to provide DOE/ECT with a data base to allow the prediction of a rational margin of confidence in overviewing and assessing the adequacy of the safety and environmental control provided by these shipping containers. Replica scale modeling techniques were employed to predict full scale response with 1/8, 1/4, and 1/2 scale models of shipping containers that are used in the shipment of spent nuclear fuel and high level wastes. Free fall impact experiments are described for scale models of plain cylindrical stainless steel shells, stainless steel shells filled with lead, and replica scale models of radioactive material shipping containers. Dynamic induced strain and acceleration measurements were obtained at several critical locations on the models. The models were dropped from various heights, attitudes to the impact surface, with and without impact limiters and at uniform temperatures between -40 and 175 0 C. In addition, thermal expansion and thermal gradient induced strains were measured at -40 and 175 0 C. The frequency content of the strain signals and the effect of different drop pad compositions and stiffness were examined. Appropriate scale modeling laws were developed and scaling techniques were substantiated for predicting full scale response by comparison of dynamic strain data for 1/8, 1/4, and 1/2 scale models with stainless steel shells and lead shielding

Dynamic Responses of Modular Hybrid Pier to Docking and Drifting Ships

Science.gov (United States)

2011-10-01

Utilities for ship “ hotel ” services are on the lower, “service” deck. This leaves the operations deck uncluttered for operation of mobile cranes...expand the simulation domain by adding a large outer basin around the core basin as shown in Figure 12 to allow proper propagation of the outbound ...accommodate larger distortions, implying a longer standoff distance once ship docking is completed, hamper cargo transfer and logistic operations

RELATIONS OF DISTRIBUTION OF THE LOW SULPHUR SHIPPING FUELS IN REGION OF THE BALTIC SEA IN THE BUNKERING BOAT-SHIP SUPPLY

Directory of Open Access Journals (Sweden)

Mariusz Matejski

2012-12-01

Full Text Available The article presents relations of distribution of the low sulphur marine fuels as result of being in force the International Convention for the Prevention of Pollution from Ships (MARPOL 73/78, especially the record establishing the region of the Baltic Sea and the North See as sulphur emission control areas (SECA. There are presented obligatory regulations and their influence on sale of the particular kinds of fuels in this region. There are also presented chosen procedures of care about cargo in relation bunker boat – harbour – ship, the delivery fuel procedures in relation bunker boat–ship and the quantitative analysis of distributed fuels on an example of chosen bunker boat.

The logistics management in the sizing of the fleet of containers per ships in dedicated route - The use of computer simulation: A Brazilian shipping company case

Directory of Open Access Journals (Sweden)

Delmo Alves de Moura

2015-09-01

Full Text Available The aim of this paper is provide the use of the simulation in the discrete event to manage one important point in the logistics systems to shipping companies that is the imbalance of containers, movement of empty containers from surplus ports to deficit ports. From a survey of data from a shipping company operating in Brazil, at various ports, it was possible to model and simulate the needs in six major domestic ports of empty and full containers and seek to meet demand in the shipping market, reducing storage of containers and maintaining the level of excellence in service. Based on the discrete event simulation it was possible to analyze the problem of empty and full containers at the ports in the maritime transportation system. It was possible study the imbalance situation in the ports e provide one tool the companies to manage yours service. The data are confined to one company located in São Paulo and operating in Brazil at maritime transportation. The research shows that the imbalance problem between full and empty containers is a real case to all companies in the maritime transportation and can have effective solutions using discrete event simulation. To have excellent supply chain management it is important to have also one effective transportation system. This paper contributes to research in the inbound and outbound part of the supply chain management.

75 FR 10546 - Shipping Coordinating Committee; Notice of Committee Meeting

Science.gov (United States)

2010-03-08

... prevent explosions on oil and chemical tankers transporting low flash point cargoes --Clarification of... on evacuation analysis for new and existing passenger ships --Consideration of IACS unified interpretations --Fixed hydrocarbon gas detection systems on double-hull tankers --Harmonization of the...

The standardised freight container: vector of vectors and vector-borne diseases.

Science.gov (United States)

Reiter, P

2010-04-01

The standardised freight container was one of the most important innovations of the 20th Century. Containerised cargoes travel from their point of origin to their destination by ship, road and rail as part of a single journey, without unpacking. This simple concept is the key element in cheap, rapid transport by land and sea, and has led to a phenomenal growth in global trade. Likewise, containerised air cargo has led to a remarkable increase in the inter-continental transportation of goods, particularly perishable items such as flowers, fresh vegetables and live animals. In both cases, containerisation offers great advantages in speed and security, but reduces the opportunity to inspect cargoes in transit. An inevitable consequence is the globalisation of undesirable species of animals, plants and pathogens. Moreover, cheap passenger flights offer worldwide travel for viral and parasitic pathogens in infected humans. The continued emergence of exotic pests, vectors and pathogens throughout the world is an unavoidable consequence of these advances in transportation technology.

Analysis Of Inland Waterway Transport For Container Shipping: Cikarang To Port Of TanjungPriok

Science.gov (United States)

Achmadi, T.; Nur, H. I.; Rahmadhon, L. R.

2018-03-01

Industry's development which is in the center of Cikarang's industrial estate causes a considerable increase from 7% to 13% of container's flow from and to Port of Tanjung Priok per year. Therefore, those obstacles rise the number of traffic congestion and transport cost. This research aims to analyze the potential alternative of transportation in order to transport containers at the route of Tanjung Priok to Cikarang utilizing Inland Waterways Transport through Cikarang Bekasi Laut (CBL) river. This research will be conducted by comparing component of total logistic cost that emerging caused by container trucks and vessels. Self Propelled Container Barge (SPCB) is a pointed alternative transportation in which it is used to transport containers through the waterways. The result of analysis obtained that the capacity of Cikarang Bekasi Laut river is 18,558 roundtrip per year. Furthermore, the collaboration of 3 SPCB operations, as well payload 32 TEUS can decrease the amount of road traffic congestion/density of Cikarang-Port of Tanjung Priok as much as 18.6%. The cost of containers shipping per unit transported by truck is IDR 2.2 Million per TEUs, whereas containers shipping transported by Inland Waterways cost only IDR 1.8 Million per TEUs.

Container inspection in the port container terminal by using 14 MeV neutrons

Energy Technology Data Exchange (ETDEWEB)

Valkovic, Vladivoj [Institute Ruder Boskovic, Zagreb (Croatia); Kvinticka 62, Zagreb (Croatia); Sudac, Davorin; Nad, Karlo; Obhodas, Jasmina [Ruder Boskovic Institute, Bijenicka c.54, Zagreb (Croatia)

2015-07-01

A proposal for an autonomous and flexible ship container inspection system is presented. This could be accomplished by the incorporation of inspection system on the container transportation devices (straddle carriers, yard gentry cranes automated guided vehicles, trailers). This configuration is terminal specific and it will be decided by container terminal operator. In such a way no part of port operational area will be used for inspection. The inspection scenario will include container transfer from ship to transportation device with inspection unit mounted on it, inspection during container movement to the container location. A neutron generator without associated alpha particle detection will be used. This will allow the use of higher neutron intensity (5x10{sup 9} - 10{sup 10} n/s in 4π). The inspected container will be stationary in the 'inspection position' on the transportation device while the 'inspection unit' will move along its side. Following analytical methods will be used simultaneously: neutron radiography, X-ray radiography, neutron activation analysis, (n,γ) and (n,n'γ) reactions, neutron absorption, and scattering, X-ray backscattering, Neutron techniques will take the advantage of using 'smart collimators' for neutrons and gammas, both emitted and detected. The inspected voxel will be defined by intersections/union of neutron generator and detectors solid angles. The container inspection protocol will be based on identification of discrepancies between its cargo manifest and its elemental 'fingerprint' and radiography profiles. In addition, the information on container weight will be obtained during the container transport and foreseen screening from the measurement of density of material in the container. (authors)

Investigations of active interrogation techniques to detect special nuclear material in maritime environments: Standoff interrogation of small- and medium-sized cargo ships

Energy Technology Data Exchange (ETDEWEB)

Miller, Thomas M., E-mail: millertm@ornl.gov; Patton, Bruce W.; Grogan, Brandon R.; Henkel, James J.; Murphy, Brian D.; Johnson, Jeffrey O.; Mihalczo, John T.

2013-12-01

In this work, several active interrogation (AI) sources are evaluated to determine their usefulness in detecting the presence of special nuclear material (SNM) in fishing trawlers, small cargo transport ships, and luxury yachts at large standoff distances from the AI source and detector. This evaluation is performed via computational analysis applying Monte Carlo methods with advanced variance reduction techniques. The goal is to determine the AI source strength required to detect the presence of SNM. The general conclusion of this study is that AI is not reliable when SNM is heavily shielded and not tightly coupled geometrically with the source and detector, to the point that AI should not be considered a via interrogation option in these scenarios. More specifically, when SNM is shielded by hydrogenous material large AI source strengths are required if detection is based on neutrons, which is not surprising. However, if the SNM is shielded by high-Z material the required AI source strengths are not significantly different if detection is based on neutrons or photons, which is somewhat surprising. Furthermore, some of the required AI source strengths that were calculated are very large. These results coupled with the realities of two ships moving independently at sea and other assumptions made during this analysis make the use of standoff AI in the maritime environment impractical.

Investigations of active interrogation techniques to detect special nuclear material in maritime environments: Standoff interrogation of small- and medium-sized cargo ships

International Nuclear Information System (INIS)

Miller, Thomas M.; Patton, Bruce W.; Grogan, Brandon R.; Henkel, James J.; Murphy, Brian D.; Johnson, Jeffrey O.; Mihalczo, John T.

2013-01-01

In this work, several active interrogation (AI) sources are evaluated to determine their usefulness in detecting the presence of special nuclear material (SNM) in fishing trawlers, small cargo transport ships, and luxury yachts at large standoff distances from the AI source and detector. This evaluation is performed via computational analysis applying Monte Carlo methods with advanced variance reduction techniques. The goal is to determine the AI source strength required to detect the presence of SNM. The general conclusion of this study is that AI is not reliable when SNM is heavily shielded and not tightly coupled geometrically with the source and detector, to the point that AI should not be considered a via interrogation option in these scenarios. More specifically, when SNM is shielded by hydrogenous material large AI source strengths are required if detection is based on neutrons, which is not surprising. However, if the SNM is shielded by high-Z material the required AI source strengths are not significantly different if detection is based on neutrons or photons, which is somewhat surprising. Furthermore, some of the required AI source strengths that were calculated are very large. These results coupled with the realities of two ships moving independently at sea and other assumptions made during this analysis make the use of standoff AI in the maritime environment impractical

Public announcement of guidelines for the packing and safe stowing of cargo in freight containers and vehicles for ocean transport (Container Stowage Guidelines)

International Nuclear Information System (INIS)

1987-01-01

The IMO and ILO guidelines are given, which help to meet the requirements of the Maritime Safety Ordinance and the Ordinance on Ocean Transport of Dangerous Goods. The guidelines explain the principles of safe packing and stowing of cargo in freight containers and vehicles for ocean transports. Further information and practical hints are given in international publications referred to in the annex. The guidelines are also meant for training purposes. (orig./HSCH) [de

A matheuristic for the liner shipping network design problem

DEFF Research Database (Denmark)

Brouer, Berit Dangaard; Desaulniers, Guy

2012-01-01

for revenue and transshipment of cargo along with in/decrease of vessel- and operational cost for the current solution. The evaluation functions may be used by heuristics in general to evaluate changes to a network design without solving a large scale multicommodity flow problem.......We present a matheuristic, an integer programming based heuristic, for the Liner Shipping Network Design Problem. The heuristic applies a greedy construction heuristic based on an interpretation of the liner shipping network design problem as a multiple quadratic knapsack problem. The construction...

Gamma motes for detection of radioactive materials in shipping containers

International Nuclear Information System (INIS)

Harold McHugh; William Quam; Stephan Weeks; Brendan Sever

2007-01-01

Shipping containers can be effectively monitored for radiological materials using gamma (and neutron) motes in distributed mesh networks. The mote platform is ideal for collecting data for integration into operational management systems required for efficiently and transparently monitoring international trade. Significant reductions in size and power requirements have been achieved for room-temperature cadmium zinc telluride (CZT) gamma detectors. Miniaturization of radio modules and microcontroller units are paving the way for low-power, deeply-embedded, wireless sensor distributed mesh networks

Fast Generation of Container Vessel Stowage Plans

DEFF Research Database (Denmark)

Pacino, Dario

that the vessel is stable and seaworthy, and at the same time arrange the cargo such that the time at port is minimized. Moreover, stowage coordinators only have a limited amount of time to produce the plan. This thesis addresses the question of whether it is possible to automatically generate stowage plans...... test instances provided by a major liner shipping company. Improvements to the modeling of vessel stability and an analysis of its accuracy together with an analysis of the computational complexity of the container stowage problem are also included in the thesis, resulting in an overall in...

The Effects of the Emission Cost on Route Choices of International Container Ships

Directory of Open Access Journals (Sweden)

Hyangsook Lee

2016-01-01

Full Text Available Maritime freight shipping has increased significantly and air pollution from international ships has grown accordingly, having serious environmental effects all over the world. This paper analyzes the effects of the emission cost on ocean route choices, focusing on international container ships. First, the paper formulates a freight network model that captures decisions and interactions of ocean carriers and port terminal operators in the maritime freight transport system. Then, the emission cost is calculated based on an activity-based approach as a component of the ocean transportation cost function. A case study is examined to find if the emission cost affects ocean route choices. The results indicate that the optimal ocean route and transportation cost are changed distinctively due to the emission cost. The research discusses how the emission cost plays a role in route changes and why ocean carriers have to consider these costs in their routing decisions.

Environmental impact analysis of the Nuclear Merchant Ship Program-addendum. Special study

International Nuclear Information System (INIS)

1977-06-01

This study represents a qualitative extension of an earlier Environmental Impact Analysis of the Nuclear Merchant Ship Program (MarAd, 1975) using an Ultra Large Crude Carrier (ULCC) as the reference ship, to other types of ships including a containership, dry-bulk cargo vessel, and an icebreaking oil tanker. This qualitative analysis shows that, for ships operating into coastal ports (containerships and possibly dry-bulk carriers), both ecological and radiological impacts would be somewhat greater than for the reference ULCC docking at an offshore terminal. These impacts can be kept within the guidelines established for land based nuclear power plants by implementation of appropriate operating procedures

Ships on hero stones from the west coast of India

Digital Repository Service at National Institute of Oceanography (India)

Tripati, S.

tossed their cargo in the waves of the sea in times of danger and promised their Gods to make a donation if ever He brought them safely out of this peril. The Buddhist goddess ?Tara? is the protectress and a number of ?Tara? images have been found... of Naval Warfare in India Boats were not only engaged for transportation of cargo, crossing rivers and lakes pleasure trips for noble people but also for naval warfare. This practice also appears to be very old. The art of employing boats and ships...

Civil ships propulsion reactor plants development and operation experience, and prospects for their improvement

International Nuclear Information System (INIS)

Vasyukov, V.I.; Kiryushin, A.I.; Panov, Yu.K.; Polunichev, V.I.

2000-01-01

Russia is alone country in the World possessing nuclear-powered icebreaker fleet. Phases of creation in Russia of several propulsion nuclear reactor plant generations are considered. By present 8 nuclear ice-breakers and a nuclear-powered cargo ship (lighter carrier) have been constructed, for which three of propulsion NSSS generations were developed. Their brief description, main performance indicators and results of operation since 1959 are given. It is shown that gradual evolution of NSSS design features has ensured creation of reliable, safe and environmentally friendly propulsion reactor plants. Issues of the propulsion NSSS life extension and improvement for new generation of nuclear ice-breakers, cargo ships, floating heat and power plants, sea water desalination and power generating complexes are considered with account for the gained operating experience. Activities on creation of new generation nuclear-powered ships and floating NPPs are considered as prospective sphere of Russia's collaboration with other countries of the World community. (author)

Optimization of ship inner shell to improve the safety of seagoing transport ship

Directory of Open Access Journals (Sweden)

Yan-Yun YU

2013-09-01

Full Text Available A practical Ship Inner Shell Optimization Method (SISOM, the purpose of which is to improve the safety of the seagoing transport ship by decreasing the maximum Still Water Bending Moment (SWBM of the hull girder under all typical loading conditions, is presented in this paper. The objective of SISOM is to make the maximum SWBM minimum, and the section areas of the inner shell are taken as optimization variables. The main requirements of the ship performances, such as cargo hold capacity, propeller and rudder immersion, bridge visibility, damage stability and prevention of pollution etc., are taken as constraints. The penalty function method is used in SISOM to change the above nonlinear constraint problem into an unconstrained one, which is then solved by applying the steepest descent method. After optimization, the optimal section area distribution of the inner shell is obtained, and the shape of inner shell is adjusted according to the optimal section area. SISOM is applied to a product oil tanker and a bulk carrier, and the maximum SWBM of the two ships is significantly decreased by changing the shape of inner shell plate slightly. The two examples prove that SISOM is highly efficient and valuable to engineering practice.

Monitoring of Radionuclides in Ship Ballast Water Following the Fukushima Nuclear Accident

International Nuclear Information System (INIS)

Abdul Kadir Ishak; Wo, Y.M.; Muhamat Omar

2011-01-01

Ballast water is the waters taken into the ship compartment to provide stability. It is taken on board at the port before the voyage begins and discharged at the port of call (arrival) while loading cargoes. Ballast is primarily composed of water and is full of stones, sediment, and thousands of living species. The quantity of water taken depends on the size of the ship and it can reach up to 10,000 tonnes. As a well known fact, Daiichi nuclear plant in Fukushima had released radioactive contaminated water into its surrounding sea and being dispersed by currents and tides. Therefore, ships travel between Malaysia and Japan in particular those from the affected regions and travel to Malaysia without cargoes will have a risk of transporting back radioactive contaminated water from Japan and released it at local ports. Malaysian Marine Department with the cooperation of Malaysian Nuclear Agency have been analysing the concentrations of several radionuclides in the ship's ballast water and sediment. This is to ensure the effective dosage is safe to the crews and general public as well to fulfill the permissible limit of 1 mSv/yr gazetted by the authorities. It is also to monitor that the contaminated water is not discharged into our marine environment. (author)

Revision of the basic plans of the first nuclear-powered ship development

International Nuclear Information System (INIS)

1978-01-01

Along with the law for Japan Nuclear Ship Development Agency, the basic plans of development of the first nuclear-powered ship have been revised. After explaining the basic policy concerning the matter, the development program is described as follows: ship type/kind, nuclear power plant, construction, training of ship crew, experimental voyage, compilation of the development results, and works after the experimental voyage. The first nuclear-powered ship of about 8,000 tons gross tonnage, 10,000 horsepower main engine output, and about 16 knots, sea speed will be the ship for special cargo transport and crew training. A pressurized water reactor is used for the power plant. Following the repair of shielding and the overall inspection of safety, the ship is to be completed as early as possible. After completion of the ship, its experimental voyage will be carried out, aiming at the aspects of operational familiarization, ship performance, reliability, port call experience, etc. (Mori, K

Criticality safety evaluation of Rocky Flats Plant one-gallon shipping containers

International Nuclear Information System (INIS)

Briggs, J.B.

1991-02-01

Intraplant shipment of small quantities of plutonium and uranium at the Rocky Flats Plant (RFP) are made in one-gallon shipping containers. Criticality safety calculations have been performed to provide an analytical basis upon which handling, storage, and transportation limits on these containers are based. The calculations and results are documented in this report. This analysis was categorized as Quality Level A (according to the EG ampersand G Idaho Quality Manual) in that it is a service whose failure could cause undue risks to employees or public health and safety. It is intended to comply with NQA-1. 7 refs., 7 figs., 12 tabs

Safety analysis report: packages. DOT specification 7A - Type A container Mark 15 sludge shipping package

International Nuclear Information System (INIS)

Zeh, C.W.

1985-03-01

Sludge or filter cake containing 1.1 wt % 235 U enriched uranium from Mark 15 fabrication will be packaged in 55-gallon containers and shipped from SRP to NLO, Fernald, Ohio for recovery of product. About 7 Metric Tons (MT) of filter cake will be produced from fabricating Mark 15 slugs each reactor charge. Packaged shipments of this material, consigned as exclusive use, will be shipped to NLO in Department of Transportation (DOT) Specification 7A - Type A packages under a DOE Certificate of Compliance for Fissile Class III shipments. ''Type A packaging'' is designed to retain containment and shielding integrity under normal conditions of transport. This report documents compliance of the package design, construction methods, material and test performance with DOT Specification 7A. This DOT 7A Type A package contains a carbon steel outer container which is a 0.060-in.-thick 55-gal, galvanized drum equipped with a gasketed closure. The outer container encloses a 0.090-in.-thick, open head, polyethylene liner with lid

Safety analysis report for packaging: the ORNL HFIR unirradiated fuel element shipping container

International Nuclear Information System (INIS)

Evans, J.H.; Boulet, J.A.M.; Eversole, R.E.

1977-11-01

The ORNL HFIR unirradiated fuel element shipping container was designed and fabricated at the Oak Ridge National Laboratory for the transport of HFIR unirradiated fuel elements. The container was evaluated analytically and experimentally to determine its compliance with the applicable regulations governing containers in which radioactive and fissile materials are transported, and the evaluation is the subject of this report. Computational and test procedures were used to determine the structural integrity and thermal behavior of the cask relative to the general standards for normal conditions of transport and the standards for the hypothetical accident conditions. The results of the evaluation demonstrate that the container is in compliance with the applicable regulations

Safety evaluation for packaging 222-S laboratory cargo tank for onetime type B material shipment

International Nuclear Information System (INIS)

Nguyen, P.M.

1994-01-01

The purpose of this Safety Evaluation for Packaging (SEP) is to evaluate and document the safety of the onetime shipment of bulk radioactive liquids in the 222-S Laboratory cargo tank (222-S cargo tank). The 222-S cargo tank is a US Department of Transportation (DOT) MC-312 specification (DOT 1989) cargo tank, vehicle registration number HO-64-04275, approved for low specific activity (LSA) shipments in accordance with the DOT Title 49, Code of Federal Regulations (CFR). In accordance with the US Department of Energy, Richland Operations Office (RL) Order 5480.1A, Chapter III (RL 1988), an equivalent degree of safety shall be provided for onsite shipments as would be afforded by the DOT shipping regulations for a radioactive material package. This document demonstrates that this packaging system meets the onsite transportation safety criteria for a onetime shipment of Type B contents

46 CFR 153.239 - Use of cast iron.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Use of cast iron. 153.239 Section 153.239 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK... Systems § 153.239 Use of cast iron. (a) Cast iron used in a cargo containment system must meet the...

Full-shipload tramp ship routing and scheduling with variable speeds

DEFF Research Database (Denmark)

Wen, M.; Røpke, Stefan; Petersen, Hanne Løhmann

2016-01-01

This paper investigates the simultaneous optimization problem of routing and sailing speed in the context of full-shipload tramp shipping. In this problem, a set of cargoes can be transported from their load to discharge ports by a fleet of heterogeneous ships of different speed ranges and load......-dependent fuel consumption. The objective is to determine which orders to serve and to find the optimal route for each ship and the optimal sailing speed on each leg of the route so that the total profit is maximized. The problem originated from a real-life challenge faced by a Danish tramp shipping company....... It is shown that speed optimization can improve the total profit by 16% on average and the fuel price has a significant effect on the average sailing speed and total profit....

High-speed quantum networking by ship

Science.gov (United States)

Devitt, Simon J.; Greentree, Andrew D.; Stephens, Ashley M.; van Meter, Rodney

2016-11-01

Networked entanglement is an essential component for a plethora of quantum computation and communication protocols. Direct transmission of quantum signals over long distances is prevented by fibre attenuation and the no-cloning theorem, motivating the development of quantum repeaters, designed to purify entanglement, extending its range. Quantum repeaters have been demonstrated over short distances, but error-corrected, global repeater networks with high bandwidth require new technology. Here we show that error corrected quantum memories installed in cargo containers and carried by ship can provide a exible connection between local networks, enabling low-latency, high-fidelity quantum communication across global distances at higher bandwidths than previously proposed. With demonstrations of technology with sufficient fidelity to enable topological error-correction, implementation of the quantum memories is within reach, and bandwidth increases with improvements in fabrication. Our approach to quantum networking avoids technological restrictions of repeater deployment, providing an alternate path to a worldwide Quantum Internet.

Study of Radiation Shielding Analysis for Low-Intermediate Level Waste Transport Ship

Energy Technology Data Exchange (ETDEWEB)

Kim, Dohyung; Lee, Unjang; Song, Yangsoo; Kim, Sukhoon; Ko, Jaehoon [Korea Nuclear Engineering and Service Corporation, Seoul (Korea, Republic of)

2007-07-01

In Korea, it is planed to transport Low-Intermediate Level Radioactive Waste (LILW) from each nuclear power plant site to Kyongju LILW repository after 2009. Transport through the sea using ship is one of the most prospective ways of LILW transport for current situation in Korea. There are domestic and international regulations for radiation dose limit for radioactive material transport. In this article, radiation shielding analysis for LILW transport ship is performed using 3-D computer simulation code, MCNP. As a result, the thickness and materials for radiation shielding walls next to cargo in the LILW transport ship are determined.

19 CFR 10.41a - Lift vans, cargo vans, shipping tanks, skids, pallets, and similar instruments of international...

Science.gov (United States)

2010-04-01

... imported cargo to a point where export cargo is to be loaded or to an exterior port of departure by a... section 402, Tariff Act of 1930 (19 U.S.C. 1401a), as amended by the Trade Agreements Act of 1979 (TAA...

Determinants of Operational Efficiency at Chemical Cargo Terminals

OpenAIRE

T.A. Gúlcan; S. Esmer; Y. Zorba; G. Şengónúl

2014-01-01

In today’s globalized world, one of the requirements of global supply chains is efficient transportation systems. Approximately 80 per cent of world merchandise trade carried by sea and handled by ports worldwide. For this reason, maritime transport has the strategic economic importance. Loading of oil and gas has the biggest share (%30) in commodities carried by sea and 2.9 billion tons oil and gas loaded to ship in 2013. This study is focus on chemical cargo terminals which is a special ter...

METHODS OF DIAGNOSTIC EFFECTIVENESS ORGANIZATIONAL CHANGES IN CARGO MOTOR TRANSPORTATION ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Denis Sergeevich Antipov

2017-03-01

Full Text Available The article propose methods of diagnostic effectiveness organizational changes in cargo motor transportation organizations. The article contain the main results approbation of the developed methods of diagnostic effectiveness organizational changes in cargo motor transportation organizations in 37 cargo motor transportation organizations of Saint-Petersburg and the Leningrad Region. Constructed diagrams of conformity specific weights resulting from organizational changes in cargo motor transportation organizations. Presents diagrams effectiveness organizational changes in cargo motor transportation organizations at every stages of the life cycle. The goal of the present paper is to development methods of diagnostic effectiveness organizational changes in cargo motor transportation organizations.

Effects of national culture on human failures in container shipping: the moderating role of Confucian dynamism.

Science.gov (United States)

Lu, Chin-Shan; Lai, Kee-hung; Lun, Y H Venus; Cheng, T C E

2012-11-01

Recent reports on work safety in container shipping operations highlight high frequencies of human failures. In this study, we empirically examine the effects of seafarers' perceptions of national culture on the occurrence of human failures affecting work safety in shipping operations. We develop a model adopting Hofstede's national culture construct, which comprises five dimensions, namely power distance, collectivism/individualism, uncertainty avoidance, masculinity/femininity, and Confucian dynamism. We then formulate research hypotheses from theory and test the hypotheses using survey data collected from 608 seafarers who work on global container carriers. Using a point scale for evaluating seafarers' perception of the five national culture dimensions, we find that Filipino seafarers score highest on collectivism, whereas Chinese and Taiwanese seafarers score highest on Confucian dynamism, followed by collectivism, masculinity, power distance, and uncertainty avoidance. The results also indicate that Taiwanese seafarers have a propensity for uncertainty avoidance and masculinity, whereas Filipino seafarers lean more towards power distance, masculinity, and collectivism, which are consistent with the findings of Hofstede and Bond (1988). The results suggest that there will be fewer human failures in container shipping operations when power distance is low, and collectivism and uncertainty avoidance are high. Specifically, this study finds that Confucian dynamism plays an important moderating role as it affects the strength of associations between some national culture dimensions and human failures. Finally, we discuss our findings' contribution to the development of national culture theory and their managerial implications for reducing the occurrence of human failures in shipping operations. Copyright © 2012 Elsevier Ltd. All rights reserved.

Container Inspection Utilizing 14 MeV Neutrons

Science.gov (United States)

Valkovic, Vladivoj; Sudac, Davorin; Nad, Karlo; Obhodas, Jasmina

2016-06-01

A proposal for an autonomous and flexible ship container inspection system is presented. This could be accomplished by the incorporation of an inspection system on various container transportation devices (straddle carriers, yard gentry cranes, automated guided vehicles, trailers). The configuration is terminal specific and it should be defined by the container terminal operator. This enables that no part of the port operational area is used for inspection. The inspection scenario includes container transfer from ship to transportation device with the inspection unit mounted on it. The inspection is performed during actual container movement to the container location. A neutron generator without associated alpha particle detection is used. This allows the use of higher neutron intensities (5 × 109 - 1010 n/s in 4π). The inspected container is stationary in the “inspection position” on the transportation device while the “inspection unit” moves along its side. The following analytical methods will be used simultaneously: neutron radiography, X-ray radiography, neutron activation analysis, (n, γ) and (n,n'γ) reactions, neutron absorption. and scattering, X-ray backscattering. The neutron techniques will utilize “smart collimators” for neutrons and gamma rays, both emitted and detected. The inspected voxel is defined by the intersection of the neutron generator and the detectors solid angles. The container inspection protocol is based on identification of discrepancies between the cargo manifest, elemental “fingerprint” and radiography profiles. In addition, the information on container weight is obtained during the container transport and screening by measuring of density of material in the container.

Radiation monitoring of conveyances, cargoes, passengers and crews on the UK following the Chernobyl accident: a preliminary review

Energy Technology Data Exchange (ETDEWEB)

Hughes, J S; Shaw, K B

1986-01-01

A brief article presents monitoring results performed on ships, aircraft, cargo, passengers and crew arriving in the UK from areas which might have been affected by the radioactive plume from the Chernobyl accident. Contamination levels on aircraft surfaces were only marginally above background. Even on the most contaminated ships, thyroid uptake by crew and passengers was not detectable and the risks presented by the surface contamination were insignificant.

Presumption of shipmaster’s criminal responsibility for narcotic drugs in ship’s cargo – maritime reality check

Directory of Open Access Journals (Sweden)

Nikoleta Radionov

2010-12-01

Full Text Available In the aftermath of the “Coral Sea” and “Therese” cases, the article deals with the problem of criminalization of the master of the ship for the crime of illicit traffic based on command responsibility. The first part of the article gives the general framework of the crimes of illicit traffic and smuggling by sea, and an overview of the ship security regulations as provided by the ISPS code. In the second part of the article, the position of the master of the ship with respect to responsibility for illicit traffic is emphasised. It starts by explaining details from both “Coral Sea” and “Therese” cases, where masters were indicted and/or prosecuted based solely on their command responsibility. The author tries to elaborate the problem from a maritime law perspective by explaining the evolution and meaning of different aspects of the three functions of the master of the ship today: nautical, administrative and representation of the shipowner. In order to put the potential responsibility of seafarers for the content of cargo into perspective, the reality of containerized cargo shipping is being explained and documented stage-by-stage. Finally, the basic concepts of criminal law are being explained, where principles of “nullumcrimen, nulla poena sine lege” apply. According to that, there can be no analogy between criminal responsibility of the master of the ship for crimes of illicit traffic (where the principle of proven guilt applies with command responsibility for war crimes.

Greater-than-Class C low-level radioactive waste shipping package/container identification and requirements study

International Nuclear Information System (INIS)

Tyacke, M.

1993-08-01

This report identifies a variety of shipping packages (also referred to as casks) and waste containers currently available or being developed that could be used for greater-than-Class C (GTCC) low-level waste (LLW). Since GTCC LLW varies greatly in size, shape, and activity levels, the casks and waste containers that could be used range in size from small, to accommodate a single sealed radiation source, to very large-capacity casks/canisters used to transport or dry-store highly radioactive spent fuel. In some cases, the waste containers may serve directly as shipping packages, while in other cases, the containers would need to be placed in a transport cask. For the purpose of this report, it is assumed that the generator is responsible for transporting the waste to a Department of Energy (DOE) storage, treatment, or disposal facility. Unless DOE establishes specific acceptance criteria, the receiving facility would need the capability to accept any of the casks and waste containers identified in this report. In identifying potential casks and waste containers, no consideration was given to their adequacy relative to handling, storage, treatment, and disposal. Those considerations must be addressed separately as the capabilities of the receiving facility and the handling requirements and operations are better understood

Linking Combat Systems Capabilities and Ship Design Through Modeling and Computer Simulation

Science.gov (United States)

2013-09-01

consumption (SFC), (4) weight of the power plant , and (5) weight capacity of cargo carrying capacity. The L/D Ratio reflects the amount of...ship. The SFC measures the efficiency of the ship in burning its fuel. The weight of the power reflects the combined weight of fuel and the power plant ... Montenegro Kotor class 1 18000 18000 27 4188800 Taiwan PSO 2 19850 39700 24 4640800 Spain Meteoro class 2 12000 24000 20.5 6261200 Colombia PSO 2

Safety analysis report for packaging (SARP) of the Oak Ridge National Laboratory. TRU curium shipping container

International Nuclear Information System (INIS)

Box, W.D.; Klima, B.B.; Seagren, R.D.; Shappert, L.B.; Aramayo, G.A.

1980-06-01

An analytical evaluation of the Oak Ridge National Laboratory Transuranium (TRU) Curium Shipping Container was made to demonstrate its compliance with the regulations governing offsite shipment of packages containing radioactive material. The evaluation encompassed five primary categories: structural integrity, thermal resistance, radiation shielding, nuclear criticality safety, and quality assurance. The results of the evaluation show that the container complies with the applicable regulations

Transfer station and method for loading and/or unloading containers from a ship

NARCIS (Netherlands)

Evers, J.J.M.

2003-01-01

Containers are transported with at least one quay crane (10) from and/or to a ship (14) along a quay (19). The quay crane (10) has a hoisting range comprising a first vehicle-positioning strip (26) on a quay surface. Depending on whether other vehicles (16, 17) are present or not on the positioning

Effects of drop testing on scale model shipping containers shielded with depleted uranium

International Nuclear Information System (INIS)

Butler, T.A.

1980-02-01

Three scale model shipping containers shielded with depleted uranium were dropped onto an essentially unyielding surface from various heights to determine their margins to failure. This report presents the results of a thorough posttest examination of the models to check for basic structural integrity, shielding integrity, and deformations. Because of unexpected behavior exhibited by the depleted uranium shielding, several tests were performed to further characterize its mechanical properties. Based on results of the investigations, recommendations are made for improved container design and for applying the results to full-scale containers. Even though the specimens incorporated specific design features, the results of this study are generally applicable to any container design using depleted uranium

Full scale impact testing for environmental and safety control of energy material shipping container systems

International Nuclear Information System (INIS)

Seagren, R.D.

1978-01-01

Heavily-shielded energy material shipping systems, similar in size and weight to those presently employed to transport irradiated reactor fuel elements, are being destructively tested under dynamic conditions. In these tests, the outer and inner steel shells interact in a complex manner with the massive biological shielding in the system. Results obtained from these tests provide needed information for new design concepts. Containment failure (and the resulting release of radioactive material to the environment which might occur in an extremely severe accident) is most likely through the seals and other ancillary features of the shipping systems. Analyses and experiments provide engineering data on the behavior of these shipping systems under severe accident conditions and information for predicting potential survivability and environmental control with a rational margin of safety

Model for Environmental Assessment of Container Ship Transport

DEFF Research Database (Denmark)

Kristensen, Hans Otto Holmegaard

2012-01-01

of these parameters on the EEDI. It is found possible to reduce EEDI by roughly 20 % without reducing ship speed, but only by changing some of the design parameters, such as reducing the sea margin by using a derated main engine, increasing the length of the ship by 5 %, and reducing steel weight by 3 % via steel...

29 CFR 1918.85 - Containerized cargo operations.

Science.gov (United States)

2010-07-01

...” (activated) container gantry crane lifting beams or attached devices are used as anchorage points, the... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting... of loading or discharging, or every crane or other hoisting equipment operator and signalman, that...

A chance-constrained stochastic approach to intermodal container routing problems.

Science.gov (United States)

Zhao, Yi; Liu, Ronghui; Zhang, Xi; Whiteing, Anthony

2018-01-01

We consider a container routing problem with stochastic time variables in a sea-rail intermodal transportation system. The problem is formulated as a binary integer chance-constrained programming model including stochastic travel times and stochastic transfer time, with the objective of minimising the expected total cost. Two chance constraints are proposed to ensure that the container service satisfies ship fulfilment and cargo on-time delivery with pre-specified probabilities. A hybrid heuristic algorithm is employed to solve the binary integer chance-constrained programming model. Two case studies are conducted to demonstrate the feasibility of the proposed model and to analyse the impact of stochastic variables and chance-constraints on the optimal solution and total cost.

Flammability Analysis For Actinide Oxides Packaged In 9975 Shipping Containers

Energy Technology Data Exchange (ETDEWEB)

Laurinat, James E.; Askew, Neal M.; Hensel, Steve J.

2013-03-21

Packaging options are evaluated for compliance with safety requirements for shipment of mixed actinide oxides packaged in a 9975 Primary Containment Vessel (PCV). Radiolytic gas generation rates, PCV internal gas pressures, and shipping windows (times to reach unacceptable gas compositions or pressures after closure of the PCV) are calculated for shipment of a 9975 PCV containing a plastic bottle filled with plutonium and uranium oxides with a selected isotopic composition. G-values for radiolytic hydrogen generation from adsorbed moisture are estimated from the results of gas generation tests for plutonium oxide and uranium oxide doped with curium-244. The radiolytic generation of hydrogen from the plastic bottle is calculated using a geometric model for alpha particle deposition in the bottle wall. The temperature of the PCV during shipment is estimated from the results of finite element heat transfer analyses.

9 CFR 381.206 - Labeling of shipping containers of poultry products offered for entry.

Science.gov (United States)

2010-01-01

... PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Labeling of shipping containers of poultry products offered for entry. 381.206 Section 381.206 Animals and Animal Products FOOD SAFETY AND...

SU-E-T-273: Radiation Shielding for a Fixed Horizontal-Beam Linac in a Shipping Container and a Conventional Treatment Vault

International Nuclear Information System (INIS)

Hsieh, M; Balter, P; Beadle, B; Chi, P; Stingo, F; Court, L

2014-01-01

Purpose: A fixed horizontal-beam linac, where the patient is treated in a seated position, could lower the overall costs of the treatment unit and room shielding substantially. This design also allows the treatment room and control area to be contained within a reduced space, such as a shipping container. The main application is the introduction of low-cost, high-quality radiation therapy to low- and middle-income regions. Here we consider shielding for upright treatments with a fixed-6MV-beam linac in a shipping container and a conventional treatment vault. Methods: Shielding calculations were done for two treatment room layouts using calculation methods in NCRP Report 151: (1) a shipping container (6m × 2.4m with the remaining space occupied by the console area), and (2) the treatment vault in NCRP 151 (7.8m by 5.4m by 3.4m). The shipping container has a fixed gantry that points in one direction at all times. For the treatment vault, various beam directions were evaluated. Results: The shipping container requires a primary barrier of 168cm concrete (4.5 TVL), surrounded by a secondary barrier of 3.6 TVL. The other walls require between 2.8–3.3 TVL. Multiple shielding calculations were done along the side wall. The results show that patient scatter increases in the forward direction and decreases dramatically in the backward direction. Leakage scatter also varies along the wall, depending largely on the distance between the gantry and the wall. For the treatment room, fixed-beam requires a slightly thicker primary barrier than the conventional linac (0.6 TVL), although this barrier is only needed in the center of one wall. The secondary barrier is different only by 0–0.2 TVL. Conclusion: This work shows that (1) the shipping container option is achievable, using indigenous materials for shielding and (2) upright treatments can be performed in a conventional treatment room with minimal additional shielding. Varian Medical Systems

SU-E-T-273: Radiation Shielding for a Fixed Horizontal-Beam Linac in a Shipping Container and a Conventional Treatment Vault

Energy Technology Data Exchange (ETDEWEB)

Hsieh, M; Balter, P; Beadle, B; Chi, P; Stingo, F; Court, L [The University of Texas MD Anderson Cancer Center, Houston, TX (United States)

2014-06-01

Purpose: A fixed horizontal-beam linac, where the patient is treated in a seated position, could lower the overall costs of the treatment unit and room shielding substantially. This design also allows the treatment room and control area to be contained within a reduced space, such as a shipping container. The main application is the introduction of low-cost, high-quality radiation therapy to low- and middle-income regions. Here we consider shielding for upright treatments with a fixed-6MV-beam linac in a shipping container and a conventional treatment vault. Methods: Shielding calculations were done for two treatment room layouts using calculation methods in NCRP Report 151: (1) a shipping container (6m × 2.4m with the remaining space occupied by the console area), and (2) the treatment vault in NCRP 151 (7.8m by 5.4m by 3.4m). The shipping container has a fixed gantry that points in one direction at all times. For the treatment vault, various beam directions were evaluated. Results: The shipping container requires a primary barrier of 168cm concrete (4.5 TVL), surrounded by a secondary barrier of 3.6 TVL. The other walls require between 2.8–3.3 TVL. Multiple shielding calculations were done along the side wall. The results show that patient scatter increases in the forward direction and decreases dramatically in the backward direction. Leakage scatter also varies along the wall, depending largely on the distance between the gantry and the wall. For the treatment room, fixed-beam requires a slightly thicker primary barrier than the conventional linac (0.6 TVL), although this barrier is only needed in the center of one wall. The secondary barrier is different only by 0–0.2 TVL. Conclusion: This work shows that (1) the shipping container option is achievable, using indigenous materials for shielding and (2) upright treatments can be performed in a conventional treatment room with minimal additional shielding. Varian Medical Systems.

Safety Analysis Report for Packaging (SARP) of the Oak Ridge National Laboratory TRU Californium Shipping Container

International Nuclear Information System (INIS)

Box, W.D.; Shappert, L.B.; Seagren, R.D.; Klima, B.B.; Jurgensen, M.C.; Hammond, C.R.; Watson, C.D.

1980-01-01

An analytical evaluation of the Oak Ridge National Laboratory TRU Californium Shipping Container was made in order to demonstrate its compliance with the regulations governing off-site shipment of packages that contain radioactive material. The evaluation encompassed five primary categories: structural integrity, thermal resistance, radiation shielding, nuclear criticality safety, and quality assurance. The results of this evaluation demonstrate that the container complies with the applicable regulations

The Benefits of Incorporating Shipping Containers into the Climate Change Adaption Plans at NASA Wallops Flight Facility

Science.gov (United States)

Hamilton, Carl Kenneth Gonzaga

2017-01-01

The National Aeronautics and Space Administration has several centers and facilities located near the coast that are undoubtedly susceptible to climate change. One of those facilities is Wallops Flight Facility on the Eastern Shore of Virginia which is separated into three areas: Main Base, Mainland, and the Island. Wallops Island has numerous buildings and assets that are vulnerable to flood inundation, intense storms, and storm surge. The shoreline of Wallops Island is prone to beach erosion and is slated for another beach replenishment project in 2019. In addition, current climate projections for NASAs centers and facilities, conducted by the Climate Adaptation Science Investigators, warn of inevitable increases in annual temperature, precipitation, sea level rise, and extreme events such as heat waves. The aforementioned vulnerabilities Wallops Island faces in addition to the projections of future climate change reveal an urgency for NASA to adjust how new buildings at its centers and facilities near the coast are built to adapt to the inevitable effects of climate change. Although the agency has made strides to mitigate the effects of climate change by incorporating L.E.E.D. into new buildings that produce less greenhouse gas, the strides for the agency to institute clear climate adaptation policies for the buildings at its centers and facilities near the coast seem to lag behind. As NASA continues to formulate formidable climate change adaptation plans for its centers and facilities, an architectural trend that should be examined for its potential to replace several old buildings at Wallops Island is shipping containers buildings. Shipping containers or Intermodal Steel Building Units offer an array of benefits such as strength, durability, versatility, modular, and since they can be upcycled, they are also eco-friendly. Some disadvantages of shipping containers are they contain harmful chemicals, insulation must be added, fossil fuels must be used to

The PEACE PIPE: Recycling nuclear weapons into a TRU storage/shipping container

International Nuclear Information System (INIS)

Floyd, D.; Edstrom, C.; Biddle, K.; Orlowski, R.; Geinitz, R.; Keenan, K.; Rivera, M.

1997-01-01

This paper describes results of a contract undertaken by the National Conversion Pilot Project (NCPP) at the Rocky Flats Environmental Technology Site (RFETS) to fabricate stainless steel ''pipe'' containers for use in certification testing at Sandia National Lab, Albuquerque to qualify the container for both storage of transuranic (TRU) waste at RFETS and other DOE sites and shipping of the waste to the Waste Isolation Pilot Project (WIPP). The paper includes a description of the nearly ten-fold increase in the amount of contained plutonium enabled by the product design, the preparation and use of former nuclear weapons facilities to fabricate the components, and the rigorous quality assurance and test procedures that were employed. It also describes how stainless steel nuclear weapons components can be converted into these pipe containers, a true ''swords into plowshare'' success story

Final Report, Next-Generation Mega-Voltage Cargo-Imaging System for Cargo Conainer Inspection, March 2007

Energy Technology Data Exchange (ETDEWEB)

Dr. James Clayton, Ph.D., Varian Medical Systems-Security & Inspection Products; Dr. Emma Regentova, Ph.D, University of Nevada Las Vegas; Dr. Evangelos Yfantis, Ph.D., University of Nevada, Las Vegas

2007-03-27

The UNLV Research Foundation, as the primary award recipient, teamed with Varian Medical Systems-Security & Inspection Products and the University of Nevada Las Vegas (UNLV) for the purpose of conducting research and engineering related to a "next-generation" mega-voltage imaging (MVCI) system for inspection of cargo in large containers. The procurement and build-out of hardware for the MVCI project has been completed. The K-9 linear accelerator and an optimized X-ray detection system capable of efficiently detecting X-rays emitted from the accelerator after they have passed through the device is under test. The Office of Science financial assistance award has made possible the development of a system utilizing a technology which will have a profound positive impact on the security of U.S. seaports. The proposed project will ultimately result in critical research and development advances for the "next-generation" Linatron X-ray accelerator technology, thereby providing a safe, reliable and efficient fixed and mobile cargo inspection system, which will very significantly increase the fraction of cargo containers undergoing reliable inspection as the enter U.S. ports. Both NNSA/NA-22 and the Department of Homeland Security's Domestic Nuclear Detection Office are collaborating with UNLV and its team to make this technology available as soon as possible.

46 CFR 154.910 - Inert gas piping: Location.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Inert gas piping: Location. 154.910 Section 154.910 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Atmospheric Control in Cargo Containment Systems § 154.910 Inert gas piping: Location. Inert gas piping must...

46 CFR 154.908 - Inert gas generator: Location.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Inert gas generator: Location. 154.908 Section 154.908 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY... Atmospheric Control in Cargo Containment Systems § 154.908 Inert gas generator: Location. (a) Except as...

An Improved Spectral Analysis Method for Fatigue Damage Assessment of Details in Liquid Cargo Tanks

Science.gov (United States)

Zhao, Peng-yuan; Huang, Xiao-ping

2018-03-01

Errors will be caused in calculating the fatigue damages of details in liquid cargo tanks by using the traditional spectral analysis method which is based on linear system, for the nonlinear relationship between the dynamic stress and the ship acceleration. An improved spectral analysis method for the assessment of the fatigue damage in detail of a liquid cargo tank is proposed in this paper. Based on assumptions that the wave process can be simulated by summing the sinusoidal waves in different frequencies and the stress process can be simulated by summing the stress processes induced by these sinusoidal waves, the stress power spectral density (PSD) is calculated by expanding the stress processes induced by the sinusoidal waves into Fourier series and adding the amplitudes of each harmonic component with the same frequency. This analysis method can take the nonlinear relationship into consideration and the fatigue damage is then calculated based on the PSD of stress. Take an independent tank in an LNG carrier for example, the accuracy of the improved spectral analysis method is proved much better than that of the traditional spectral analysis method by comparing the calculated damage results with the results calculated by the time domain method. The proposed spectral analysis method is more accurate in calculating the fatigue damages in detail of ship liquid cargo tanks.

NS OTTO HAHN - the first German nuclear ship

International Nuclear Information System (INIS)

1981-01-01

The NS OTTO HAHN is the first and only European nuclear propelled cargo and research vessel. She entered service in 1968 and was operated for 11 years without any technical failure. The essential experience and know-how about the nuclear propulsion unit is available now. Therefore the ship was decommissioned in 1979. Until the end of 1981 all activated and contaminated components will be removed and decontaminated. The ship can then be released for conventional utilization. In this book the NS OTTO HAHN is described in detail and the experiences of operation as well as research and development activities are reported. All earlier publications of GKSS on the same subject are listed. (orig.) [de

Sulina and Danube-Black Sea Channels: Competitors or Allies on Cargo Transport in South-Eastern Europe?

Directory of Open Access Journals (Sweden)

Ionica Soare

2015-10-01

Full Text Available The two river channels which connect the Black Sea to the inland Romanian area, have constituted since the beginning of their building two very important transport routes for the cargo and passenger traffic (Sulina that have connected Black Sea to the internal ports of Romania, thus representing ”transport highways” of the Romanian economy. The present study tries to present the chronological evolution of these two shipping routes, regarding their importance to the cargo traffic, as well as the financial policy imposed by the administration of these channels. We will present and analyze retrospectively the major elements regarding the administration of these channels, a comparative analysis of the role of these two channels in the river cargo transport, consequently trying to predict a future evolution of these two river communication routes.

Comprehensive simultaneous shipboard and airborne characterization of exhaust from a modern container ship at sea.

Science.gov (United States)

Murphy, Shane M; Agrawal, Harshit; Sorooshian, Armin; Padró, Luz T; Gates, Harmony; Hersey, Scott; Welch, W A; Lung, H; Miller, J W; Cocker, David R; Nenes, Athanasios; Jonsson, Haflidi H; Flagan, Richard C; Seinfeld, John H

2009-07-01

We report the first joint shipboard and airborne study focused on the chemical composition and water-uptake behavior of particulate ship emissions. The study focuses on emissions from the main propulsion engine of a Post-Panamax class container ship cruising off the central coast of California and burning heavy fuel oil. Shipboard sampling included micro-orifice uniform deposit impactors (MOUDI) with subsequent off-line analysis, whereas airborne measurements involved a number of real-time analyzers to characterize the plume aerosol, aged from a few seconds to over an hour. The mass ratio of particulate organic carbon to sulfate at the base of the ship stack was 0.23 +/- 0.03, and increased to 0.30 +/- 0.01 in the airborne exhaust plume, with the additional organic mass in the airborne plume being concentrated largely in particles below 100 nm in diameter. The organic to sulfate mass ratio in the exhaust aerosol remained constant during the first hour of plume dilution into the marine boundary layer. The mass spectrum of the organic fraction of the exhaust aerosol strongly resembles that of emissions from other diesel sources and appears to be predominantly hydrocarbon-like organic (HOA) material. Background aerosol which, based on air mass back trajectories, probably consisted of aged ship emissions and marine aerosol, contained a lower organic mass fraction than the fresh plume and had a much more oxidized organic component. A volume-weighted mixing rule is able to accurately predict hygroscopic growth factors in the background aerosol but measured and calculated growth factors do not agree for aerosols in the ship exhaust plume. Calculated CCN concentrations, at supersaturations ranging from 0.1 to 0.33%, agree well with measurements in the ship-exhaust plume. Using size-resolved chemical composition instead of bulk submicrometer composition has little effect on the predicted CCN concentrations because the cutoff diameter for CCN activation is larger than the

Methods of Raising Funds for Purchasing of New Cruise Ships by International Corporations

Directory of Open Access Journals (Sweden)

Kizielewicz Joanna

2017-06-01

Full Text Available The world’s cruise corporations regularly purchase large, luxurious cruise ships. In accordance with the Cruise Line International Association, 33 new ocean cruise ships will be available on the market by 2020. These types of capital expenditures are associated with large financial outlays of up to $ 1 billion. The leading cruise corporations are not able to finance purchases of new units with their own resources and therefore look for different solutions. Available publications focus mainly on issues related to purchasing cargo ships, not cruise ships. The objective of the article is to identify sources of funding of new cruise ships. Our analysis identifies the average capital expenditure associated with purchasing new cruise ships and factors that influence it. The most popular methods for raising such capital are also provided. Our research methodology relies on data exploration method, a desk research method and comparative analysis.

49 CFR 178.348 - Specification DOT 412; cargo tank motor vehicle.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Specification DOT 412; cargo tank motor vehicle... SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.348 Specification DOT 412; cargo tank motor vehicle. ...

49 CFR 178.347 - Specification DOT 407; cargo tank motor vehicle.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Specification DOT 407; cargo tank motor vehicle... SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.347 Specification DOT 407; cargo tank motor vehicle. ...

49 CFR 178.346 - Specification DOT 406; cargo tank motor vehicle.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Specification DOT 406; cargo tank motor vehicle... SPECIFICATIONS FOR PACKAGINGS Specifications for Containers for Motor Vehicle Transportation § 178.346 Specification DOT 406; cargo tank motor vehicle. ...

Added masses of ship structures

CERN Document Server

Korotkin, Alexandr I

2008-01-01

This essentially self-contained reference book contains data on added masses of ships and various ship and marine engineering structures. Theoretical and experimental methods for determining added masses of these objects are described.

LCA-ship. Design tool for energy efficient ships. A Life Cycle Analysis Program for Ships. Final report

Energy Technology Data Exchange (ETDEWEB)

Jiven, Karl; Sjoebris, Anders [MariTerm AB, Goeteborg (Sweden); Nilsson, Maria [Lund Univ. (Sweden). Stiftelsen TEM; Ellis, Joanne; Traegaardh, Peter; Nordstroem, Malin [SSPA Sweden AB, Goeteborg (Sweden)

2004-05-01

In order to make it easier to include aspects during ship design that will improve environmental performance, general methods for life cycle calculations and a prototype tool for LCA calculations of ships and marine transportation have been developed. The base of the life cycle analyses is a comprehensive set of life cycle data that was collected for the materials and consumables used in ship construction and vessel operations. The computer tool developed makes it possible to quickly and simply specify (and calculate) the use of consumables over the vessel's life time cycle. Special effort has been made to allow the tool to be used for different types of vessels and sea transport. The main result from the project is the computer tool LCA ship, which incorporates collected and developed life cycle data for some of the most important materials and consumables used in ships and their operation. The computer application also contains a module for propulsion power calculations and a module for defining and optimising the energy system onboard the vessel. The tool itself is described in more detail in the Computer application manual. The input to the application should, as much as possible, be the kind of information that is normally found in a shipping company concerning vessel data and vessel movements. It all starts with defining the ship to be analysed and continues with defining how the ship is used over the lifetime. The tool contains compiled and processed background information about specific materials and processes (LCA data) connected to shipping operations. The LCA data is included in the tool in a processed form. LCA data for steel will for example include the environmental load from the steel production, the process to build the steel structure of the ship, the scrapping and the recycling phase. To be able to calculate the environmental load from the use of steel the total amount of steel used over the life cycle of the ship is also needed. The

Test plan/procedure for the SPM-1 shipping container system. Revision 0

International Nuclear Information System (INIS)

Flanagan, B.D.

1995-01-01

The 49 CFR 173.465 Type A packaging tests will verify that SPM-1 will provide adequate protection and pass as a Type A package. Test will determine that the handle of the Pig will not penetrate through the plywood spacer and rupture the shipping container. Test plan/procedure provides planning, pre-test, setup, testing, and post-testing guidelines and procedures for conducting the open-quotes Free Drop Testclose quotes procedure for the SPM-1 package

CONSIDERING ANTI-PIRACY SHIP SECURITY: CITADEL DESIGN AND USE

Directory of Open Access Journals (Sweden)

L. Carral

2015-09-01

Full Text Available As piracy continues to pose a threat to the shipping industry, a number of measures for protecting ships, cargo and crew will need to be implemented. Along with other steps, such as deploying military rescue teams, securing the crew within a ship’s citadel has proved to be a highly effective form of self-protection against hostage-taking by pirates. From a design standpoint, aspects that should be considered include the location and dimensions of the citadel, the maximum time crew can stay within it and the specific requirements for various elements of the ship or citadel equipment. Exploiting data on pirate attacks recently occurring in High Risk Areas, this article analyses the design and use of the citadel as a self-protection measure against piracy. As a conclusion, various requirements for these structures are recommended.

Stereo imaging and random array stratified imaging for cargo radiation inspecting

International Nuclear Information System (INIS)

Wang Jingjin; Zeng Yu

2003-01-01

This paper presents a Stereo Imaging and Random Array Stratified Imaging for cargo container radiation Inspecting. By using dual-line vertical detector array scan, a stereo image of inspected cargo can be obtained and watched with virtual reality view. The random detector array has only one-row of detectors but distributed in a certain horizontal dimension randomly. To scan a cargo container with this random array detector, a 'defocused' image is obtained. By using 'anti-random focusing', one layer of the image can be focused on the background of all defocused images from other layers. A stratified X-ray image of overlapped bike wheels is presented

Waste gas could provide power for ships

Energy Technology Data Exchange (ETDEWEB)

1970-07-18

Dual-fuel engines are not new, but a version has been produced which, when used on ships carrying liquefied natural gas (LNG) could operate almost completely on waste gas. In its gas-operating mode, an engine can use the waste gas boiled off an LNG cargo. This wastage, normally allowed to escape to atmosphere, is about 0.25% of the cargo per day. Calculations have shown that this is enough to provide almost all the propulsion needs of a tanker under full cargo. This design is important in that it is suitable for the larger vessels now being required to carry LNG from N. Africa to North America, a journey where the costs of fuel are very considerable. Tests on the engine have indicated that power output is reduced to something like 80% of power under diesel fuel. However, additional advantages, such as cleaner engines with reduced maintenance costs, will help to tip the economic balance even further in favor of the dual purpose unit. This system also is applicable to stationary generating plant, again particularly on LNG tankage units where the same degree of gas boil-off applies.

A matheuristic for the Cargo Mix Problem with Block Stowage

DEFF Research Database (Denmark)

Christensen, Jonas Mark; Pacino, Dario

2017-01-01

The cargo-mix problem aims at selecting the amount of containers of a given type to load on a vessel. In this article we present an extended definition that includes the analysis of a circular route with draft restrictions, limitations on expected cargo and the use of a block stowage strategy...

X-ray scan detection for cargo integrity

Science.gov (United States)

Valencia, Juan; Miller, Steve

2011-04-01

The increase of terrorism and its global impact has made the determination of the contents of cargo containers a necessity. Existing technology allows non-intrusive inspections to determine the contents of a container rapidly and accurately. However, some cargo shipments are exempt from such inspections. Hence, there is a need for a technology that enables rapid and accurate means of detecting whether such containers were non-intrusively inspected. Non-intrusive inspections are most commonly performed utilizing high powered X-ray equipment. The challenge is creating a device that can detect short duration X-ray scans while maintaining a portable, battery powered, low cost, and easy to use platform. The Pacific Northwest National Laboratory (PNNL) has developed a methodology and prototype device focused on this challenge. The prototype, developed by PNNL, is a battery powered electronic device that continuously measures its X-ray and Gamma exposure, calculates the dose equivalent rate, and makes a determination of whether the device has been exposed to the amount of radiation experienced during an X-ray inspection. Once an inspection is detected, the device will record a timestamp of the event and relay the information to authorized personnel via a visual alert, USB connection, and/or wireless communication. The results of this research demonstrate that PNNL's prototype device can be effective at determining whether a container was scanned by X-ray equipment typically used for cargo container inspections. This paper focuses on laboratory measurements and test results acquired with the PNNL prototype device using several X-ray radiation levels.

Recycling of merchant ships

Directory of Open Access Journals (Sweden)

Magdalena Klopott

2013-12-01

Full Text Available The article briefly outlines the issues concerning ship recycling. It highlights ships' high value as sources of steel scrap and non-ferrous metals, without omitting the fact that they also contain a range of hazardous substances. Moreover, the article also focuses on basic ship demolition methods and their environmental impact, as well as emphasizes the importance of “design for ship recycling” philosophy.

A GRASP algorithm for the container stowage slot planning problem

DEFF Research Database (Denmark)

Parreno, Francisco; Pacino, Dario; Alvarez-Valdes, Ramon

2016-01-01

in clusters along the vessel. For each of those clusters a specific position for each container must be found. Compared to previous studies, we have introduced two new features: the explicit handling of rolled out containers and the inclusion of separations rules for dangerous cargo. We present a novel......This work presents a generalization of the Slot Planning Problem which raises when the liner shipping industry needs to plan the placement of containers within a vessel (stowage planning). State-of-the-art stowage planning relies on a heuristic decomposition where containers are first distributed...... integer programming formulation and a Greedy Randomized Adaptive Search Procedure (GRASP) to solve the problem. The approach is able to find high-quality solution within 1 s. We also provide comparison with the state-of-the-art on an existing and a new set of benchmark instances. (C) 2016 Elsevier Ltd...

Economic Possibilities of Shipping though Northern Sea Route1

Directory of Open Access Journals (Sweden)

Sung-Woo Lee

2014-12-01

Full Text Available Global warming and climate change haves brought a new issue in the Arctic sea. Therefore, we can now explore new shipping routes through the Arctic Ocean instead of the existing commercial route. In particular, the Northern Sea Route (NSR is one of the feasible shipping routes and, has provided tremendous shipping benefits. If the NSR becomes commercialized, we will be able to save about 5,000 nautical miles in distance and sailing time. In this study, we will emphasize some of the important results on the possibility of commercializing the shipping route in the Arctic. The NSR may bring positive economic effects in terms of shipping distance and time. For example, when utilizing the NSR, the maximum cargo traffic between Asia and Europe is expected to be around 46 million TEU. However, we also need to consider an expensive passage fee that is currently imposed by Russia. In conclusion, we maintain our efforts to protect the environment in the Arctic, in terms of logistics, and we need to explore every possible avenue to bring possible economic benefits to the North Pacific countries.

Effects of overexpression of the SH2-containing inositol phosphatase SHIP on proliferation and apoptosis of erythroid AS-E2 cells

NARCIS (Netherlands)

Boer, AK; Drayer, AL; Vellenga, E

Previous studies have demonstrated that SH2-containing inositol phosphatase (SHIP) is involved in the control of B cell, myeloid cell and macrophage activation and proliferation. The goal of the present study was to examine the role of SHIP during proliferation and apoptosis in cells of the

Effects of overexpression of the SH2-containing inositol phosphatase SHIP on proliferation and apoptosis of erythroid AS-E2 cells

NARCIS (Netherlands)

Boer, AK; Drayer, AL; Vellenga, E

2001-01-01

Previous studies have demonstrated that SH2-containing inositol phosphatase (SHIP) is involved in the control of B cell, myeloid cell and macrophage activation and proliferation. The goal of the present study was to examine the role of SHIP during proliferation and apoptosis in cells of the

Power feature required for PEFC powered electric propulsion ship

Energy Technology Data Exchange (ETDEWEB)

Yoshida, Isao [NKK Corp., Yokohama (Japan); Oka, Masaru [Mitsubishi Heavy Industries, Ltd., Nagasaki (Japan)

1996-12-31

This report covers part of a joint study on a PEFC system for ship propulsion, summarized in a presentation to this Seminar, entitled {open_quote}Study on a Polymer Electrolyte Fuel Cell (PEFC) Propulsion System for Surface Ships{close_quotes}, and which envisages application to a 1,500 DWT cargo vessel. The aspect treated here concerns an analysis of the load-following performance required and estimated of a PEFC system to power the envisaged ship. The analysis proved that difficulty should be expected of the fuel supply circuit in following with adequate rapidity the sharp changes of load on fuel cell under certain conditions. Further integrated experiments and simulation exercises are currently in progress to further analyze the response characteristics of the fuel supply circuit-particularly of the methanol reformer and gas reservoir-to determine the best measure to be adopted for overcoming the expected difficulty.

Analysis of a Gross Counting Decision Metric for use in Threat Detection During Cargo Container Inspection

International Nuclear Information System (INIS)

Hall, J

2006-01-01

LLNL is actively engaged in the development of a variety of advanced technologies for use in detecting potential threats in sea-going cargo containers, particularly the presence of hidden special nuclear materials (SNM). One such project is the so-called ''Nuclear Car Wash'' (NCW), which uses a high-energy neutron probe to scan the container. High-energy, β-delayed γ-rays emitted during the decay of short-lived, neutron-induced fission products are then taken as a signature of fissionable material. There are a number of different threat decision metrics that one could imagine using in conjunction with an inspection system such as the NCW; however, the most straightforward approach might be to simply compare the total number of counts that our detector records during some suitably chosen time interval to the average background signal that one would expect from a ''clean'' container during the same interval. The purpose of this report is to describe the basic statistical properties of a decision metric of this sort and outline the procedures for using it in experimental practice

Civilian nuclear ships

International Nuclear Information System (INIS)

Oelgaard, P.L.

1993-03-01

This report contains a review of the information available on nuclear powered ships, built for civilian purposes. In the introduction a short discussion is given of the reasons for the limited use of nuclear ships for these purposes. In the second section a brief review is presented of data for the three experimental/merchant ships build by the United States, Germany and Japan, i.e. NS Savannah, NS Otto Hahn and NS Mutsu. In the third section the Soviet/Russian icebreaker NS Lenin is considered. Its design, operational experience and the introduction of a new nuclear propulsion plant is reviewed. In the fourth section the newer Soviet/Russian icebreakers with nuclear propulsion are considered. Finally design of the Soviet/Russian icebreaker transport/container ship NS Sevmorput is reviewed in the fifth section. The future Russian plans for nuclear vessels for the arctic waters are briefly discussed. (au)

Enhanced situational technologies applied to ship channels

Science.gov (United States)

Helgeson, Michael A.; Wacker, Roger A.

1997-06-01

The Houston Ship Channel ranks as America's number one port in foreign tonnage by welcoming more than 50,000 cargo ships and barges annually. Locally 196,000 jobs, 5.5 billion dollars in business revenue and 213 million dollars in taxes are generated. Unfortunately, 32 days of each year vessel traffic stops for hours due to fog causing an estimated 40- 100 million dollars loss as ships idly wait in the channel for weather to clear. In addition, poor visibility has contributed to past vessel collisions which have resulted in channel closure, and associated damage to property and the environment. Today's imaging technology for synthetic vision systems and enhanced situational awareness systems offers a new solution to this problem. Whereas, typically these systems have been targeted at aircraft landing systems the channel navigation application provides a peripheral ground based market. This paper describes two imaging solutions to the problem. One using an active 35 GHz scanning radar and the other using a 94 GHz passive millimeter wave camera.

Cargo distributions differentiate pathological axonal transport impairments.

Science.gov (United States)

Mitchell, Cassie S; Lee, Robert H

2012-05-07

Axonal transport is an essential process in neurons, analogous to shipping goods, by which energetic and cellular building supplies are carried downstream (anterogradely) and wastes are carried upstream (retrogradely) by molecular motors, which act as cargo porters. Impairments in axonal transport have been linked to devastating and often lethal neurodegenerative diseases, such as Amyotrophic Lateral Sclerosis, Huntington's, and Alzheimer's. Axonal transport impairment types include a decrease in available motors for cargo transport (motor depletion), the presence of defective or non-functional motors (motor dilution), and the presence of increased or larger cargos (protein aggregation). An impediment to potential treatment identification has been the inability to determine what type(s) of axonal transport impairment candidates that could be present in a given disease. In this study, we utilize a computational model and common axonal transport experimental metrics to reveal the axonal transport impairment general characteristics or "signatures" that result from three general defect types of motor depletion, motor dilution, and protein aggregation. Our results not only provide a means to discern these general impairments types, they also reveal key dynamic and emergent features of axonal transport, which potentially underlie multiple impairment types. The identified characteristics, as well as the analytical method, can be used to help elucidate the axonal transport impairments observed in experimental and clinical data. For example, using the model-predicted defect signatures, we identify the defect candidates, which are most likely to be responsible for the axonal transport impairments in the G93A SOD1 mouse model of ALS. Copyright © 2012 Elsevier Ltd. All rights reserved.

Conclusions from collision examinations for nuclear merchant ships in the FRG

International Nuclear Information System (INIS)

Woisin, G.

1978-01-01

In Germany model tests have been performed for the utilization of a resisting type barrier instead of an energy absorbing type barrier, the latter used in nuclear merchant ships up to now only. After reviewing the model technique the results of nine tests with the new barrier are discussed. Calculations performed to the newly raised questions of the shock accelerations of the reactor plant and of possible overstressing of the hull are reported. The new design has many advantages with respect to safety and to the arrangement of a reactor plant in a ship too. Some questions partly remain unanswered at the moment concerning oblique collisions to the ends of the barrier and the possible effects of bulk cargo in holds close to the bow in striking ships of smaller size

Application Side Casing on Open Deck RoRo to Improve Ship Stability

Science.gov (United States)

Hasanudin; K. A. P Utama, I.; Chen, Jeng-Horng

2018-03-01

RoRo is a vessel that can transport passengers, cargo, container and cars. Open Car Deck is favourite RoRo Vessel in developing countries due to its small GT, small tax and spacious car deck, but it has poor survival of stability. Many accident involve Open Car Deck RoRo which cause fatalities and victim. In order to ensure the safety of the ship, IMO had applied intact stability criteria IS Code 2008 which adapted from Rahola’s Research, but since 2008 IMO improved criteria become probabilistic damage stability SOLAS 2009. The RoRo type Open Car Deck has wide Breadth (B), small Draft (D) and small freeboard. It has difficulties to satisfy the ship’s stability criteria. Side Casings which has been applied in some RoRo have be known reduce freeboard or improve ship’s safety. In this paper investigated the effect side casings to survival of intact dan damage ship’s stability. Calculation has been conducted for four ships without, existing and full side casings. The investigation results shows that defect stability of Open Deck RoRo can be reduce with fitting side casing.

46 CFR 151.50-36 - Argon or nitrogen.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Argon or nitrogen. 151.50-36 Section 151.50-36 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-36 Argon or nitrogen. (a) A cargo tank that contains argon or nitrogen and that has a maximum allowable working pressure of 172 kPa (25...

Extrapolation of model tests measurements of whipping to identify the dimensioning sea states for container ships

DEFF Research Database (Denmark)

Storhaug, Gaute; Andersen, Ingrid Marie Vincent

2015-01-01

to small storms. Model tests of three container ships have been carried out in different sea states under realistic assumptions. Preliminary extrapolation of the measured data suggested that moderate storms are dimensioning when whipping is included due to higher maximum speed in moderate storms...

Study of the Accident Environment During Sea Transport of Nuclear Material: Analysis of an Engine-room Fire on a Purpose-built Ship (invited paper)

International Nuclear Information System (INIS)

Yamamoto, K.; Kitamura, T.; Shibata, K.; Ouchi, Y.; Ito, T.; Hohnstreiter, G.F.; Pierce, J.D.; Koski, J.A.; Dukart, R.K.

2000-01-01

The programme goal was to show that the IAEA safe transport regulations adequately cover the thermal effects of an engine-room fire on plutonium transport packages stowed aboard a purpose-built ship. The packages are stored in transport containers located in a cargo hold of the ship. For this study, it was assumed that the packages in No 5 hold, adjacent to an engine-room, could be subject to heating due to a fire in the engine-room. The No 5 hold and the engine-room are separated by a water-filled bulkhead. This study addressed the heat transfer from an engine-room fire that could heat and evaporate water out of the water-filled bulkhead and the resulting temperature conditions around the packages and inside the packages near their elastometric seals. (author)

Column generation approaches to ship scheduling with flexible cargo sizes

DEFF Research Database (Denmark)

Brønmo, Geir; Nygreen, Bjørn; Lysgaard, Jens

2010-01-01

consequences for the times used in the ports because both the loading and unloading times depend on the cargo sizes. We found it computationally hard to find exact solutions to the subproblems, so our method does not guarantee to find the optimum over all solutions. To be able to say something about how good...... our solution is, we generate a bound on the difference between the true optimal objective and the objective in our solution. We have compared our method with an a priori column generation approach, and our computational experiments on real world cases show that our Dantzig-Wolfe approach is faster...... than the a priori generation of columns, and we are able to deal with larger or more loosely constrained instances. By using the techniques introduced in this paper, a more extensive set of real world cases can be solved either to optimality or within a small deviation from optimality....

SHOCK-JR: a computer program to analyze impact response of shipping container

International Nuclear Information System (INIS)

Ikushima, Takeshi; Nakazato, Chikara; Shimoda, Osamu; Uchino, Mamoru.

1983-02-01

The report is provided for using a computer program, SHOCK-JR, which is used to analyze the impact response of shipping containers. Descriptions are the mathematical model, method of analysis, structures of the program and the input and output variables. The program solves the equations of motion for a one-dimensional, lumped mass and nonlinear spring model. The solution procedure uses Runge-Kutta-Gill and Newmark-β methods. SHOCK-JR is a revised version of SHOCK, which was developed by ORNL. In SHOCK-JR, SI dimension is used and graphical output is available. (author)

Contributing to shipping container security: can passive sensors bring a solution?

International Nuclear Information System (INIS)

Janssens-Maenhout, G.; De Roo, F.; Janssens, W.

2010-01-01

Illicit trafficking of fissionable material in container cargoes is recognized as a potential weakness in Nuclear Security. Triggered by the attacks of 11 September 2001, measures were undertaken to enhance maritime security in extension to the Safety Of Life At Sea Convention and in line with the US Container Security Initiatives. Effective detection techniques are needed that allow the inspector to intercept illicit trafficking of nuclear weapons components or components of other nuclear explosive devices. Many security measures focus on active interrogation of the container content by X-ray scan, which might be extended with the newly developed tagged neutron inspection system. Both active interrogation techniques can, with the current huge volume of container traffic, only be applied to a limited number of selected containers. The question arises whether a passive detection technique can offer an alternative solution. This study investigates if containers equipped with a small passive detector will register during transport the neutron irradiation by fissionable material such as plutonium in a measurable way. In practice, 4/5 of the containers are about 1/8 filled with hydrogenous material and undergo a typical 2 months route. For this reference case, it was found that the most compatible passive detector would be an activation foil of iridium. Monte-Carlo simulations showed that for the reference case the activity of a 250 μm thin foil with 6 cm 2 cross-section would register 1.2 Bq when it is irradiated by a significant quantity of Reactor-Grade PuO 2 . However this activity drops with almost two orders of magnitude for other fillings and other isotopic compositions and forms of the Pu-source. The procedure of selecting the target material for Pu detection is detailed with the theoretical methods, in order to be useful for other applications. Moreover the value of such additional passive sensors for securing maritime container transport is situated within

Significance of Waterway Navigation Positioning Systems On Ship's Manoeuvring Safety

Science.gov (United States)

Galor, W.

The main goal of navigation is to lead the ship to the point of destination safety and efficiently. Various factors may affect ship realisating this process. The ship movement on waterway are mainly limited by water area dimensions (surface and depth). These limitations cause the requirement to realise the proper of ship movement trajectory. In case when this re requirement cant't fulfil then marine accident may happend. This fact is unwanted event caused losses of human health and life, damage or loss of cargo and ship, pollution of natural environment, damage of port structures or blocking the port of its ports and lost of salvage operation. These losses in same cases can be catas- trophical especially while e.i. crude oil spilling could be place. To realise of safety navigation process is needed to embrace the ship's movement trajectory by waterways area. The ship's trajectory is described by manoeuvring lane as a surface of water area which is require to realise of safety ship movement. Many conditions affect to ship manoeuvring line. The main are following: positioning accuracy, ship's manoeuvring features and phenomena's of shore and ship's bulk common affecting. The accuracy of positioning system is most important. This system depends on coast navigation mark- ing which can range many kinds of technical realisation. Mainly used systems based on lights (line), radionavigation (local system or GPS, DGPS), or radars. If accuracy of positiong is higer, then safety of navigation is growing. This article presents these problems exemplifying with approaching channel to ports situated on West Pomera- nian water region.

An Analysis Nomoto Gain and Norbin Parameter on Ship Turning Maneuver

Directory of Open Access Journals (Sweden)

Aulia Siti Aisjah

2010-05-01

Full Text Available First order approach of maneuvering ship model developed by Nomoto, that has commonly underpinned researchers on mathematical models of ship maneuvering, is employed by the present research in order to describe the results of Nomoto validation gain value from some type of ships. In this present study, the controls are designated using FLC, while the rules are derived from FLC; furthermore, the reference is the LQG/LTR. On the other pole, Norbin parameters are obtained under the bases of the gain and time constant output control response. Validation of Nomoto gain value is obtained through the calculation of the value of a constant gain, settling time of the first order response, and approach value toward damping ratio and natural frequency response of the system used to control the output of the second order pattern. Validation is employed on 20 types of ships with a length between 40-350 meters; as a result, it is figured out that at the Low Speed General Cargo ship, Mariner, RO/RO, and Barge Carrier have good maneuverability compared to the other 17 types of ships.

Study on analysing the criteria's for selection of shipping carriers in Chinese shipping market using analytical hierarchy process

DEFF Research Database (Denmark)

Shen, Lixin; Mathiyazhagan, K.; Kannan, Devika

2015-01-01

Globalisation has led to the increased export and import of goods worldwide. Due to this, the selection of the right mode of transportation for heavy (huge) goods items is a challenging task for industries. In this regard, maritime transport is the best way to send huge goods compared to other...... are cargoes' damage degree when they are received (R2). It is acting as an important criteria and reliability for on-time delivery (R1) and the carrier's ability of multimodal transportation (C1) are the next priority criteria's for the selection of shipping carrier....

Device for Detection of Explosives, Nuclear and Other Hazardous Materials in Luggage and Cargo Containers

International Nuclear Information System (INIS)

Kuznetsov, Andrey; Evsenin, Alexey; Osetrov, Oleg; Vakhtin, Dmitry; Gorshkov, Igor

2009-01-01

Device for detection of explosives, radioactive and heavily shielded nuclear materials in luggage and cargo containers based on Nanosecond Neutron Analysis/Associated Particles Technique (NNA/APT) is under construction. Detection module consists of a small neutron generator with built-in position-sensitive detector of associated alpha-particles, and several scintillator-based gamma-ray detectors. Explosives and other hazardous chemicals are detected by analyzing secondary high-energy gamma-rays from reactions of fast neutrons with materials inside a container. The same gamma-ray detectors are used to detect unshielded radioactive and nuclear materials. An array of several neutron detectors is used to detect fast neutrons from induced fission of nuclear materials. Coincidence and timing analysis allows one to discriminate between fission neutrons and scattered probing neutrons. Mathematical modeling by MCNP5 and MCNP-PoliMi codes was used to estimate the sensitivity of the device and its optimal configuration. Comparison of the features of three gamma detector types--based on BGO, NaI and LaBr 3 crystals is presented.

Device for Detection of Explosives, Nuclear and Other Hazardous Materials in Luggage and Cargo Containers

Science.gov (United States)

Kuznetsov, Andrey; Evsenin, Alexey; Gorshkov, Igor; Osetrov, Oleg; Vakhtin, Dmitry

2009-12-01

Device for detection of explosives, radioactive and heavily shielded nuclear materials in luggage and cargo containers based on Nanosecond Neutron Analysis/Associated Particles Technique (NNA/APT) is under construction. Detection module consists of a small neutron generator with built-in position-sensitive detector of associated alpha-particles, and several scintillator-based gamma-ray detectors. Explosives and other hazardous chemicals are detected by analyzing secondary high-energy gamma-rays from reactions of fast neutrons with materials inside a container. The same gamma-ray detectors are used to detect unshielded radioactive and nuclear materials. An array of several neutron detectors is used to detect fast neutrons from induced fission of nuclear materials. Coincidence and timing analysis allows one to discriminate between fission neutrons and scattered probing neutrons. Mathematical modeling by MCNP5 and MCNP-PoliMi codes was used to estimate the sensitivity of the device and its optimal configuration. Comparison of the features of three gamma detector types—based on BGO, NaI and LaBr3 crystals is presented.

Thermal response modeling of a contact-handled transuranic waste shipping container system to a fire

International Nuclear Information System (INIS)

Suchsland, K.E.; Kwong, K.C.; Fretter, E.F.; Boyd, R.D.; Auerbach, I.; Yoshimura, H.R.

1980-01-01

A one-dimensional thermal model has been developed to predict the response of a transuranic (TRU) waste shipping container accidentally exposed to a fire environment. The basic wall structure of the container consists of polyurethane foam (64 kg/m 3 ) sandwiched between two steel plates. The foam thermal model, based on high temperature experimental data, is developed for the case in which the virgin foam is in a nonoxidizing environment. The experimental results indicate that foam decomposition is highly heat rate dependent. At low quasi-steady heating rates, the foam changes to a bubbling black viscous liquid. At very high heating rates, pyrolysis gases are formed as the foam decomposes and a 20% (by weight) residual char remains. This porous char acts as a radiation shield which can significantly reduce thermal transport. In the case of a TRU shipping container wall, this char will slow the thermal penetration rate and drastically reduce the heat load to the container contents. When the front surface of the wall was subjected to 1333 0 K, numerical computations predict that after approximately 1800 s the foam temperature rise at a depth of 10.2 cm was less than 200 K (uncharred). After approximately 3600 s the foam temperature rise at a depth of 20.4 cm was 23 0 K. Typical waste contents temperature rise was predicted to be less than 56 0 K after 3600 s of heating

Natural gas for ship propulsion in Denmark - Possibilities for using LNG and CNG on ferry and cargo routes

Energy Technology Data Exchange (ETDEWEB)

Stuer-Lauridsen, F.; Nielsen, Jesper B. (LITEHAUZ, Copenhagen (Denmark)); Odgaard, T.; Birkeland, M. (IncentivePartners, Birkeroed (Denmark)); Winter Graugaard, C.; Blikom, L.P. (DNV, Copenhagen (Denmark)); Muro-Sun, N.; Andersen, Morten; OEvlisen, F. (Ramboell Oil and Gas, Esbjerg (Denmark))

2010-07-01

The project's main task was to review logistical, technical and economic feasibility for using Liquefied Natural Gas (LNG) and Compressed Natural Gas (CNG) as fuel for ship propulsion and the supply of LNG or CNG to Danish ports from existing natural gas lines, trucks or by ship. The following key findings are related to the use of natural gas as fuel for ships in Denmark: Natural gas as propulsion fuel in ships: 1) Advantages: Provide solution to present air emission challenges 2) Barriers: Capital investments large 3) Synergies: Developments in Norway and Baltic Sea area 4) Economy: Positive case for operation for large consumers 5) Future: Develop bunkering options for short sea shipping LNG: 6) Propulsion technology in ships is mature and proven 7) Distribution network not yet developed for use in ships 8) Safety concerns are demanding but manageable 9) Can enter existing bunkering value chain CNG: 10) Well developed for land based transport, not yet for shipping 11) Distribution network for natural gas exists in Denmark 12) Safety concerns are demanding but manageable 13) No seaborne CNG value chains in operation An immediate focus on the ferry sector in Denmark will reap benefits on a relatively short time scale. For the short sea shipping sector away to promote the conversion to natural gas is to support the development of storage and bunkering facilities in main ports. Given the general expectations in the shipping community LNG will presumably be the de facto choice at least for the 5-10 years ahead and the demand for facilities and bunkers will be for LNG. (LN)

Data Envelopment Analysis of Helsinki-Tallinn Transportation Chains

Directory of Open Access Journals (Sweden)

Olli-Pekka Hilmola

2013-12-01

Full Text Available The Baltic Sea shipping is at a crossroads as sulphur regulation will lead to excessive cost increases from the year 2015 onwards and CO2 emission trading is planned to be implemented for the entire shipping sector within the EU area. Therefore, shipping is going to be minimized and hinterland transportation (road and rail will act as substitute. This research analyzes the situation on one of the highest volume general cargo transportation routes of Finland (operating between Helsinki, Finland and Tallinn, Estonia, including loading and unloading at seaports and short sea shipping activity in between. Based on the efficiency evaluation results, it seems that containers should be favoured over semi-trailers – containers could be carried efficiently either in container ships or even at currently favoured RoRo or RoPax ships. Our research illustrates that pure container shipping with larger container ships within the analyzed route is not entirely out of question, but lead time and hinterland operations should receive more attention. Alternatively, RoRo and RoPax ships can also do something to increase their competitiveness in environmental harm caused and diesel consumption – higher cargo loads and utilization levels are short-term key for continued dominance.

Opportunities for peak shaving the energy demand of ship-to-shore quay cranes at container terminals

NARCIS (Netherlands)

H. Geerlings; Robert Heij; dr. J.H.R. van Duin

2018-01-01

This paper presents the results of both a qualitative and a quantitative study on the possibilities for peak shaving the energy demand of ship-to-shore (STS) cranes at container terminals. The objective is to present an energy consumption model that visualizes the energy demand of STS cranes and to

Opportunities for peak shaving the energy demand of ship-to-shore quay cranes at container terminals

NARCIS (Netherlands)

Geerlings, Harry; van Duin, Ron

2018-01-01

This paper presents the results of both a qualitative and a quantitative study on
the possibilities for peak shaving the energy demand of ship-to-shore (STS) cranes at container terminals. The objective is to present an energy consumption model that visualizes the energy demand of STS cranes and

Fuel exchanging machine for a nuclear ship

International Nuclear Information System (INIS)

Hayashi, Tetsuji.

1984-01-01

Purpose: To prevent atmospheric contaminations upon fuel exchange thereby keep the environmental circumstance clean in the periphery of the nuclear ship. Constitution: A nuclear reactor container is disposed to the inside of a containing vessel in the ship body and a shutter is mounted to the upper opening of the ship body. Further, a landing container having a bottom opening equipped with shutter for alingning the upper opening equipped with shuuter of the ship is elevatably suspended to the trolley of a crane by way of a wire rope and a winch, and a fuel exchange cask is elevatably disposed to the inside of the landing container. Further, airs in the inside of the container is adapted to be discharged externally through a filter by means of a blower and the inside is kept at a negative pressure. Thus, since the containing vessel is covered with the landing container upon fuel exchanging operation, atmospheric contamination can be prevented sufficiently. (Sekiya, K.)

9 CFR 98.32 - Inspection of certain aircraft and other means of conveyance and shipping containers thereon...

Science.gov (United States)

2010-01-01

... other means of conveyance and shipping containers thereon; unloading, cleaning, and disinfection... inspector. (c) Cleaning and disinfection: Whenever, upon inspection under this section, an inspector... requirements under this section. The person so notified shall cause the cleaning and disinfection of such means...

Real-Time Simulation of Ship-Structure and Ship-Ship Interaction

DEFF Research Database (Denmark)

Lindberg, Ole; Glimberg, Stefan Lemvig; Bingham, Harry B.

2013-01-01

, because it is simple, easy to implement and computationally efficient. Multiple many-core graphical processing units (GPUs) are used for parallel execution and the model is implemented using a combination of C/C++, CUDA and MPI. Two ship hydrodynamic cases are presented: Kriso Container Carrier at steady...

Time analysis of the containerized cargo flow in the logistic chain using simulation tools: the case of the Port of Seville (Spain)

Energy Technology Data Exchange (ETDEWEB)

Ruiz Aguilar, J.J.; Turias, J.I.; Cerban, M.; Gonzalez, M.J.; Pulido, A.

2016-07-01

The logistic chain that connects the capital of Spain (Madrid) with the Canary Islands has the Port of Seville as the port node. This port node makes possible to switch from one transport mode (railway) to another (maritime) at the container terminal of the port. Some constraints, such as the operational time window that restricts the freight train access into the port in a certain time-slot or the need of the reversal of the train before entering into port, lead to generate important time delays in the intermodal chain. A time analysis of the process is necessary in order to check the critical points. A simulation of the whole process from the goods departing the origin station by train until they leave the port of Seville by ship to the Canary Islands is performed. To this aim, a queuing model network was developed in order to simulate the travel time of the cargo. The database is composed of daily departures of goods train and daily departures of vessels (including times of docking, berthing or load/unload cargo). The final objective of this work is twofold: firstly, to provide a validated model of the containerized cargo flow and secondly, to demonstrate that this kind of queuing models can become a powerful supporting tool in making decisions about future investments. (Author)

Buckling of Ship Structures

CERN Document Server

Shama, Mohamed

2013-01-01

Buckling of Ship Structures presents a comprehensive analysis of the buckling problem of ship structural members. A full analysis of the various types of loadings and stresses imposed on ship plating and primary and secondary structural members is given. The main causes and consequences of the buckling mode of failure of ship structure and the methods commonly used to control buckling failure are clarified. This book contains the main equations required to determine the critical buckling stresses for both ship plating and the primary and secondary stiffening structural members. The critical buckling stresses are given for ship plating subjected to the induced various types of loadings and having the most common boundary conditions encountered in ship structures.  The text bridges the gap existing in most books covering the subject of buckling of ship structures in the classical analytical format, by putting the emphasis on the practical methods required to ensure safety against buckling of ship structur...

Radiological risks from irradiation of cargo contents with EURITRACK neutron inspection systems

International Nuclear Information System (INIS)

Giroletti, E.; Bonomi, G.; Donzella, A.; Viesti, G.; Zenoni, A.

2012-01-01

The radiological risk for the population related to the neutron irradiation of cargo containers with a tagged neutron inspection system has been studied. Two possible effects on the public health have been assessed: the modification of the nutritional and organoleptic properties of the irradiated materials, in particular foodstuff, and the neutron activation of consumer products (i.e. food and pharmaceuticals). The result of this study is that irradiation of food and foodstuff, pharmaceutical and medical devices in container cargoes would neither modify the properties of the irradiated material nor produce effective doses of concern for public health. Furthermore, the dose received by possible stowaways present inside the container during the inspection is less than the annual effective dose limit defined by European Legislation for the public. - Highlights: ► Neutron irradiation of cargo containers implies a radiological risk. ► The risk is about the modification of food properties and the products activation. ► Assessment is made about the EURITRACK neutron irradiation system. ► Results show that the EURITRACK scanning is not dangerous for the population.

46 CFR 147.90 - Refrigerants.

Science.gov (United States)

2010-10-01

.../ASHRAE 34-78 may be carried as ships' stores. (b) Refrigerants contained in a vessel's operating system... 46 Shipping 5 2010-10-01 2010-10-01 false Refrigerants. 147.90 Section 147.90 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) DANGEROUS CARGOES HAZARDOUS SHIPS' STORES Stowage and Other...

46 CFR 153.1025 - Motor fuel antiknock compounds.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Motor fuel antiknock compounds. 153.1025 Section 153... Cargo Procedures § 153.1025 Motor fuel antiknock compounds. (a) No person may load or carry any other cargo in a containment system approved for motor fuel antiknock compounds containing lead alkyls except...

A Heuristic and Hybrid Method for the Tank Allocation Problem in Maritime Bulk Shipping

DEFF Research Database (Denmark)

Vilhelmsen, Charlotte; Larsen, Jesper; Lusby, Richard Martin

Many bulk ships have multiple tanks and can thereby carry multiple inhomogeneous products at a time. A major challenge when operating such ships is how to best allocate cargoes to available tanks while taking tank capacity, safety restrictions, ship stability and strength as well as other...... ship route. We have developed a randomised heuristic for eciently nding feasible allocations and computational results show that it can solve 99% of the considered instances within 0.5 seconds and all of them if allowed longer time. The heuristic is designed to work as an ecient subproblem solver...... and in such a setting with running times below e.g. 5 seconds, the heuristic clearly outperforms an earlier method by consistently solving more instances and eectively cutting 84% of the average running time. Furthermore, we have combined our heuristic with a modied version of the earlier method to derive a hybrid...

Wisconsin Air Cargo Study

Science.gov (United States)

2011-04-01

Air cargo is a key economic lifeline for the communities that have airports. Manufacturers, businesses, hospitals and : other community cornerstone employers depend on air cargo to successfully operate. While there is no doubt that air : cargo repres...

Residual Strength Analysisof Asymmetrically Damaged Ship Hull GirderUsing Beam Finite Element Method

Directory of Open Access Journals (Sweden)

Muhammad Zubair Muis Alie

2016-04-01

Full Text Available The objective of the present study is to analyze the residual strength of asymmetrically damaged ship hull girder under longitudinal bending. Beam Finite Element Method isused for the assessment of the residual strength of two single hull bulk carriers (Ship B1 and Ship B4 and a three-cargo-hold model of a single-side Panamax Bulk Carrierin hogging and sagging conditions. The Smith’s  method  is  adopted  and  implemented  into  Beam  Finite  Element Method. An efficient solution procedure is applied; i.e. by assuming the cross section remains plane, the vertical bending moment is applied to the  cross section  and  three-cargo-hold  model. As a fundamental  case,  the  damage is simply  created  by removing the elements from the cross section, neglecting any welding residual stress and initial imperfection. Also no crack  extension  is considered.  The  result  obtained  by  Beam  Finite  Element  Method  so-called Beam-HULLST is compared to the progressive collapse analysis obtained by HULLST for the validation of the present work. Then, for the three-hold-model, the Beam-HULLST is used to investigate the effect of the rotation of the netral axisboth intact and damage condition taking the one and five frame spaces into account. 

Symbolic Configuration for Interactive Container Ship Stowage Planning

DEFF Research Database (Denmark)

Kroer, Christian; Svendsen, Martin Kjær; Jensen, Rune Møller

2014-01-01

Low-cost containerized shipping requires high-quality stowage plans. Scalable stowage planning optimization algorithms have been developed recently. All of these algorithms, however, produce monolithic solutions that are hard for stowage coordinators to modify, which is necessary in practice owin...

Concept Design and Risk Assessment of Nuclear Propulsion Ship

International Nuclear Information System (INIS)

Gil, Youngmi; Yoo, Seongjin; Kim, Yeontae; Oh, June; Byun, Yoonchul; Woo, Ilguk; Kim, Jiho; Choi, Suhn

2014-01-01

The nuclear propulsion ships (hereinafter referred to as 'nuclear ships') have been considered as an eco-friendly ship. There have historically been warship and submarine with the source of nuclear power. The use of nuclear ships has been recently extending to the icebreaker, the deep-water exploration ship, and the floating nuclear power plant. Prior to developing the new ship, we evaluated the economics of various types of ships and concluded that the container ship could be appropriate for the nuclear propulsion. In order to verify its safety, we performed the ship calculation based on the optimal arrangement of the nuclear reactor. Finally, we verified its safety by the HAZID. In the former research, we confirmed the applicability of the nuclear propulsion system for the large container ship. In this study, we verified the safety of the nuclear ships according to the HAZID analysis. We expect that this research will lead to safe design of the nuclear ships

Concept Design and Risk Assessment of Nuclear Propulsion Ship

Energy Technology Data Exchange (ETDEWEB)

Gil, Youngmi; Yoo, Seongjin; Kim, Yeontae; Oh, June; Byun, Yoonchul; Woo, Ilguk [Daewoo Shipbuilding and Marine Engineering Co. Ltd., Seoul (Korea, Republic of); Kim, Jiho; Choi, Suhn [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

The nuclear propulsion ships (hereinafter referred to as 'nuclear ships') have been considered as an eco-friendly ship. There have historically been warship and submarine with the source of nuclear power. The use of nuclear ships has been recently extending to the icebreaker, the deep-water exploration ship, and the floating nuclear power plant. Prior to developing the new ship, we evaluated the economics of various types of ships and concluded that the container ship could be appropriate for the nuclear propulsion. In order to verify its safety, we performed the ship calculation based on the optimal arrangement of the nuclear reactor. Finally, we verified its safety by the HAZID. In the former research, we confirmed the applicability of the nuclear propulsion system for the large container ship. In this study, we verified the safety of the nuclear ships according to the HAZID analysis. We expect that this research will lead to safe design of the nuclear ships.

Problems of heat transfer within the containing vessel of high performance LMFBR spent fuel shipping casks

International Nuclear Information System (INIS)

Pope, R.B.; Gartling, D.K.; Schimmel, W.P. Jr.; Larson, D.W.

1976-01-01

A preliminary assessment of heat transfer problems internal to a LMFBR spent fuel shipping cask is reported. The assessment is based upon previous results obtained in full-scale, electrically heated mockups of an LMFBR assembly located in a containing pipe, and also upon analytical and empirical studies presented in this paper. It is shown that a liquid coolant will be required to adequately distribute the decay heat of short-cooled assemblies from the fuel region to the containing cask structure. Liquid sodium apparently provides the best heat transfer, and sufficient data are available to adequately model the heat transfer processes involved. Dowtherm A is the most efficient organic evaluated to date and presented in the open literature. Since the organic materials have high Prandtl and usually high Rayleigh numbers, natural convection is the predominant mode of heat transfer. It is shown that a more comprehensive understanding of the convective processes will be required before heat transfer with an organic coolant can be adequately modeled. However, in view of systems considerations, Dowtherm A should be further considered as an alternative to sodium for use as a LMFBR spent fuel shipping cask coolant

46 CFR 153.234 - Fore and aft location.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Fore and aft location. 153.234 Section 153.234 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING... Containment Systems § 153.234 Fore and aft location. Except as allowed in § 153.7, each ship must meet the...

The use of x-ray imaging technology in cargo inspection

International Nuclear Information System (INIS)

Palgan, Renato D.

2009-01-01

The aftermath of the September 11,2001 terrorist attack in the United States has brought a significant change in the conduct of trade and commerce among nations. The introduction on non-intrusive cargo inspection equipment, most x-ray and gamma ray scanners, among customs administrations worldwide has been widely employed and incorporated in their respective cargo examination procedures as part of their security initiative to deter terrorist threats. In compliance with our international commitment and agreement passed by the World Customs Organization which required the use of modern technology in cargo inspection, the Bureau of Customs had acquired 30 units of container x-ray scanners in 2006 from China that became operational in 2007 and the acquisition of which was guided by the following objectives: maximize collection of government revenues,facilitate trade and commerce, prevent smuggling, and safeguard the public and environment against the entry of hazardous and harmful substance. In this light, this paper discusses the brief background of the non-intrusive container inspection system project of the Bureau of Customs, an overview of the technical features of x-ray imaging technology acquired, the procedures in the application of x-ray inspection in containerized cargo, the radiation safety infrastructures and considerations, and a review of some major accomplishments after its two years of existence. (author)

Ultimate Strength of Ship Hulls under Torsion

DEFF Research Database (Denmark)

Paik, Jeom Kee; Thayamballi, Anil K.; Pedersen, Preben Terndrup

2001-01-01

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characte......For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength...... characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections...... subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical...

IMPAC-2, Dynamic Impact Analysis for 1-D Nonlinear Spring Shipping Container Model

International Nuclear Information System (INIS)

Payne, J. B.; Counts, J.

1980-01-01

1 - Description of problem or function: IMPAC2 solves the equations of motion for a one-dimensional, lumped-mass, nonlinear spring mathematical container model. The program was designed to analyze the dynamic response of metallic shipping containers impacting an unyielding surface. The container may consist of several hollow concentric cylinders, each of a different material and length. 2 - Method of solution: An iteration technique (Newmark-Beta) is used to solve the equations of motion for displacement, velocity, and acceleration of the masses at each time-step. 3 - Restrictions on the complexity of the problem: The maximum number of masses is 100. The program is written for a maximum of 10 different materials. The first seven have been given the following designations: 1 steel, 2 clad lead, 3 uranium, 4 pine, 5 lead, 6 balsa, 7 marine plywood. Stress-strain characteristics for materials 1, 3, 4, and 6 are approximated by a bilinear curve fit which requires as input the modulus of elasticity, the stress at the intersection of the two lines and the slope of the second line

Internal Corrosion Analysis of Model 9975 Packaging Containing Pu or PuO2 During Shipping and Storage

International Nuclear Information System (INIS)

Vormelker, P.

1999-01-01

The Materials Consultation Group of SRTC has completed an internal corrosion analysis of the Model 9975 packaging assembly containing either Pu or PuO2 for storage in K Reactor under ambient conditions for a period of 12 years. The 12-year storage period includes two years for shipping and up to ten years for storage

ATMX-600 rail car safety analysis report for packaging (SARP)

International Nuclear Information System (INIS)

Adcock, F.E.; McCarthy, J.D.

1977-01-01

The ATMX-600 series rail car is used by Rockwell International, Rocky Flats Plant, for shipping low-level radioactive waste under the provisions of DOT Special Permit 5948. Fissile Class I shipments are authorized with the car loaded to capacity with drums containing up to 200 g of 239 Pu. Inner packaging may be polyethylene-lined steel drums or fiberglass-coated plywood crates. These massive double-walled steel cars provide the equivalent protection of a Type B package. Rapid loading and unloading of the 9- by 9- by 50-ft cargo space is accomplished by prepackaging the waste in standard 20-ft steel cargo containers. The ATMX-600 rail car will hold two cargo containers, each carrying seventy 55-gal drums and up to 44,800 lb gross weight. Improvements to inner packaging and current shipping practices are discussed

The Army’s Use of Containerization for Unit Deployments

Science.gov (United States)

1991-12-07

Middle East. With oil profits, many citizens of the Arab nations were willing to pay a high price for the various cargoes that were being shipped in...containers elsewhere in the world. Since the Arab nations did not yet have ports capable of handling containerships, Ro/Ro ships were developed as...March 1991]. If one porn of embarkation becomes congested, they have the internal capability to reroute cargo at any point along its path. Because

Single liner shipping service design

DEFF Research Database (Denmark)

Plum, Christian Edinger Munk; Pisinger, David; Salazar-González, Juan-José

2014-01-01

The design of container shipping networks is an important logistics problem, involving assets and operational costs measured in billions of dollars. To guide the optimal deployment of the ships, a single vessel round trip is considered by minimizing operational costs and flowing the best paying...

Air cargo in the Mid-America Freight Coalition region.

Science.gov (United States)

2012-08-01

This report contains a contextual review of air cargo transportation in the 10-state Mid-America Freight Coalition (MAFC) region including the industrys recent history, security implications, and integration within the greater MAFC economy. The re...

Tramp Ship Routing and Scheduling - Models, Methods and Opportunities

DEFF Research Database (Denmark)

Vilhelmsen, Charlotte; Larsen, Jesper; Lusby, Richard Martin

of their demand in advance. However, the detailed requirements of these contract cargoes can be subject to ongoing changes, e.g. the destination port can be altered. For tramp operators, a main concern is therefore the efficient and continuous planning of routes and schedules for the individual ships. Due...... and scheduling problem, focus should now be on extending this basic problem to include additional real-world complexities and develop suitable solution methods for those extensions. Such extensions will enable more tramp operators to benefit from the solution methods while simultaneously creating new...

46 CFR 153.907 - Cargo information.

Science.gov (United States)

2010-10-01

... Information § 153.907 Cargo information. (a) The master shall ensure that the following information for each cargo carried under this part is readily available to those on the tankship engaged in cargo operations... exposed to the cargo. (7) A list of fire fighting procedures and extinguishing agents effective with cargo...

Safety Analysis Report for Packaging: The unirradiated fuel shipping container USA/9853/AF

International Nuclear Information System (INIS)

1991-01-01

The HFBR Unirradiated Fuel Shipping Container was designed and fabricated at the Oak Ridge National Laboratory in 1978 for the transport of fuel for the High Flux Beam Reactor (HFBR) for Brookhaven National Laboratory. The package has been evaluated analytically, as well as the comparison to tests on similar packages, to demonstrate compliance with the applicable regulations governing packages in which radioactive and fissile materials are transported. The contents of this Safety Analysis Report for Packaging (SARP) are based on Regulatory Guide 7.9 (proposed Revision 2 - May 1986), 10 CFR Part 71, DOE Order 1540.2, DOE Order 5480.3, and 49 CFR Part 173

Deep-sea faunal communities associated with a lost intermodal shipping container in the Monterey Bay National Marine Sanctuary, CA.

Science.gov (United States)

Taylor, Josi R; DeVogelaere, Andrew P; Burton, Erica J; Frey, Oren; Lundsten, Lonny; Kuhnz, Linda A; Whaling, P J; Lovera, Christopher; Buck, Kurt R; Barry, James P

2014-06-15

Carrying assorted cargo and covered with paints of varying toxicity, lost intermodal containers may take centuries to degrade on the deep seafloor. In June 2004, scientists from Monterey Bay Aquarium Research Institute (MBARI) discovered a recently lost container during a Remotely Operated Vehicle (ROV) dive on a sediment-covered seabed at 1281 m depth in Monterey Bay National Marine Sanctuary (MBNMS). The site was revisited by ROV in March 2011. Analyses of sediment samples and high-definition video indicate that faunal assemblages on the container's exterior and the seabed within 10 m of the container differed significantly from those up to 500 m. The container surface provides hard substratum for colonization by taxa typically found in rocky habitats. However, some key taxa that dominate rocky areas were absent or rare on the container, perhaps related to its potential toxicity or limited time for colonization and growth. Ecological effects appear to be restricted to the container surface and the benthos within ∼10 m. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

The profit maximizing liner shipping problem with flexible frequencies: logistical and environmental considerations

DEFF Research Database (Denmark)

Giovannini, Massimo; Psaraftis, Harilaos N.

2018-01-01

for the ship operator and as a result they typically minimize costs. This treatment does not capture a fundamental characteristic of shipping market behavior, that ships tend to speed up in periods of high freight rates and slow down in depressed market conditions. This paper develops a simple model...... for a fixed route scenario which, among other things, incorporates the influence of freight rates, along with that of fuel prices and cargo inventory costs into the overall decision process. The objective to be maximized is the line’s average daily profit. Departing from convention, the model is also able...... to consider flexible service frequencies, to be selected from a broader set than the standard assumption of one call per week. It is shown that this may lead to better solutions and that the cost of forcing a fixed frequency can be significant. Such cost is attributed either to additional fuel cost...

The Risk of Striking Accidents During LPG Ships Passage in Ports in Respect to Technical Failures based on Real Time Simulations in Szczecin-Świnoujście Waterway

Directory of Open Access Journals (Sweden)

Bąk Andrzej

2016-10-01

Full Text Available The method of risk assessment based on ship systems technical failures during the passage in the region of Świnoujście of the large LPG (liquefied petroleum gas tanker is presented. The statistical reliability indicators and the simulation model of ships manoeuvring. The researches carried out within this paper let to determine the safety level and necessary tug escort service during the passage of the ship with the hazardous cargo in the port area.

Analysis of International Commodity Shipping Data and the Shipment of NORM to the United States

International Nuclear Information System (INIS)

Baciak, James E.; Ely, James H.; Schweppe, John E.; Sandness, Gerald A.; Robinson, Sean M.

2011-01-01

As part of the Spreader Bar Radiation Detector project, PNNL analyzed US import data shipped through US ports collected over the 12 months of 2006 (over 4.5 million containers). Using these data, we extracted a variety of distributions that are of interest to modelers and developers of active and passive detection systems used to 'scan' IMCCs for potential contraband. This report expands on some of the analysis presented in an earlier report from LLNL, by investigation the foreign port distribution of commodities shipped to the US. The majority of containers shipped to the United States are 40 ft containers (∼70%); about 25% are 20 ft; and about 3.6% are 45 ft containers. A small fraction (<1%) of containers are of other more specialized sizes, and very few ports actually ship these unique size containers (a full distribution for all foreign ports is shown in Appendix A below). The primary foreign ports that ship the largest fraction of each container are shown in the table below. Given that 45 ft containers comprise 1 of out every 27 containers shipped to the US, and given the foreign ports from which they are shipped, they should not be ignored in screening; further testing and analysis of radiation measurements for national security with this size container is warranted. While a large amount of NORM is shipped in IMCCs, only a few specific commodities are shipped with enough frequency to present potential issues in screening IMCCs at ports. The majority of containers with NORM will contain fertilizers (5,700 containers), granite (59,000 containers), or ceramic (225,000 containers) materials. Fertilizers were generally shipping in either 20- or 40 ft containers with equal frequency. While granite is mostly shipped in 20 ft containers, ceramic materials can be shipped in either 20- or 40 ft containers. The size of container depended on the specific use of the ceramic or porcelain material. General construction ceramics (such as floor and roofing tiles) tend to

Analysis of International Commodity Shipping Data and the Shipment of NORM to the United States

Energy Technology Data Exchange (ETDEWEB)

Baciak, James E.; Ely, James H.; Schweppe, John E.; Sandness, Gerald A.; Robinson, Sean M.

2011-10-01

As part of the Spreader Bar Radiation Detector project, PNNL analyzed US import data shipped through US ports collected over the 12 months of 2006 (over 4.5 million containers). Using these data, we extracted a variety of distributions that are of interest to modelers and developers of active and passive detection systems used to 'scan' IMCCs for potential contraband. This report expands on some of the analysis presented in an earlier report from LLNL, by investigation the foreign port distribution of commodities shipped to the US. The majority of containers shipped to the United States are 40 ft containers ({approx}70%); about 25% are 20 ft; and about 3.6% are 45 ft containers. A small fraction (<1%) of containers are of other more specialized sizes, and very few ports actually ship these unique size containers (a full distribution for all foreign ports is shown in Appendix A below). The primary foreign ports that ship the largest fraction of each container are shown in the table below. Given that 45 ft containers comprise 1 of out every 27 containers shipped to the US, and given the foreign ports from which they are shipped, they should not be ignored in screening; further testing and analysis of radiation measurements for national security with this size container is warranted. While a large amount of NORM is shipped in IMCCs, only a few specific commodities are shipped with enough frequency to present potential issues in screening IMCCs at ports. The majority of containers with NORM will contain fertilizers (5,700 containers), granite (59,000 containers), or ceramic (225,000 containers) materials. Fertilizers were generally shipping in either 20- or 40 ft containers with equal frequency. While granite is mostly shipped in 20 ft containers, ceramic materials can be shipped in either 20- or 40 ft containers. The size of container depended on the specific use of the ceramic or porcelain material. General construction ceramics (such as floor and roofing

Detection of nuclear material by photon activation inside cargo containers

Science.gov (United States)

Gmar, Mehdi; Berthoumieux, Eric; Boyer, Sébastien; Carrel, Frédérick; Doré, Diane; Giacri, Marie-Laure; Lainé, Frédéric; Poumarède, Bénédicte; Ridikas, Danas; Van Lauwe, Aymeric

2006-05-01

Photons with energies above 6 MeV can be used to detect small amounts of nuclear material inside large cargo containers. The method consists in using an intense beam of high-energy photons (bremsstrahlung radiation) in order to induce reactions of photofission on actinides. The measurement of delayed neutrons and delayed gammas emitted by fission products brings specific information on localization and quantification of the nuclear material. A simultaneous measurement of both of these delayed signals can overcome some important limitations due to matrix effects like heavy shielding and/or the presence of light elements as hydrogen. We have a long experience in the field of nuclear waste package characterization by photon interrogation and we have demonstrated that presently the detection limit can be less than one gram of actinide per ton of package. Recently we tried to extend our knowledge to assess the performance of this method for the detection of special nuclear materials in sea and air freights. This paper presents our first results based on experimental measurements carried out in the SAPHIR facility, which houses a linear electron accelerator with the energy range from 15 MeV to 30 MeV. Our experiments were also modeled using the full scale Monte Carlo techniques. In addition, and in a more general frame, due to the lack of consistent data on photonuclear reactions, we have been working on the development of a new photonuclear activation file (PAF), which includes cross sections for more than 600 isotopes including photofission fragment distributions and delayed neutron tables for actinides. Therefore, this work includes also some experimental results obtained at the ELSA electron accelerator, which is more adapted for precise basic nuclear data measurements.

Calculation of mean outcrossing rates of non-Gaussian processes with stochastic input parameters - Reliability of containers stowed on ships in severe sea

DEFF Research Database (Denmark)

Nielsen, Ulrik Dam

2010-01-01

values is expected to occur, and the final result, the mean outcrossing rate, is obtained by summation. The derived procedure is illustrated by an example considering the forces in containers stowed on ships and, in particular, results are presented for the so-called racking failure in the containers...

Trends in oil spills from tanker ships 1995-2004

International Nuclear Information System (INIS)

Huijer, K.

2005-01-01

The trends in oil spills around the world over from 1995 to 2004 were examined and analyzed for possible influences on spill volumes and frequencies for incidents of 3 spill size classes. The International Tanker Owners Pollution Federation (ITOPF) has maintained a database since 1974 of all oil spills from tankers, combined carriers and barges. The number of oil spills has decreased significantly in the last 30 years despite a steady increase in maritime oil trade since the 1980s. The recent trends were identified by causes, locations, oil type, and shipping legislation. The causes include ship loading/discharging, bunkering, collisions, groundings, hull failures and fires. The types of oil spilt include bunker, crude, cargo fuel, white product and some unknowns. It was concluded that the decline in oil spills is due to a range of initiatives taken by governments and the shipping industry rather than any one factor. Some notable influences towards reduced number of spills include: the international convention for the prevention of pollution from ships of 1972, as modified by the Protocol of 1978; the international convention for the safety of life at sea of 1974; and the Oil Pollution Act of 1990. Results of investigations into the causes of spills serve the purpose of informing the international process to further prevent and reduce marine oil pollution due to tankers. 7 refs., 5 tabs., 12 figs

Review of the total system related to operation of nuclear-powered ship

International Nuclear Information System (INIS)

Takamasa, Tomoji; Miyashita, Kunio

2000-01-01

It is essential to establish a marine reactor having excellent safety and reliability, which is capable of competing economically with conventional ships, and which can be accepted by international society, in order to be prepared for practical application of future nuclear-powered ships. For this purpose, it is important not only to demonstrate a marine reactor using a model or test device to simulate actual operation, but also to establish the environmental requirements for operation of a nuclear-powered ship, such as safety standards that are operationally and internationally common for ships, and to establish a repair base for nuclear-powered ships. Systems research for the practical application of nuclear-powered ships was conducted for five years, fiscal years 1992 through 1996, by a group in the Japan Atomic Energy Research Institute (JAERI), under the project title 'Review of the total system related to operation of nuclear-powered ships.' The project sought to summarize requirements for the practical application of nuclear-powered ships from the standpoint of the need side, e.g., what nuclear-powered ships will be requested, and what functions will be provided under the expected future social environment; to show a complete system concept for the operation of nuclear-powered ships; and to clarify the situations creating demand for nuclear-powered ships, as well as the system and environmental conditions to be established for operation of practical nuclear-powered ships. Study considerations included the size of the operation system for a nuclear-powered ship, a scenario for introducing a nuclear-powered container ship, and economic evolution from the effects on the whole shipping system, based on container ships, of introducing a nuclear-powered ship. The results of these considerations were made the framework for constructing an entire system and evaluating its economy. The treatment and disposal of radioactive waste from a nuclear-powered ship, and the

MELTER: A model of the thermal response of cargos transported in the Safe-Secure Trailer subject to fire environments for risk assessment applications

International Nuclear Information System (INIS)

Larsen, M.E.

1994-08-01

MELTER is an analysis of cargo responses inside a fire-threatened Safe-Secure Trailer (SST) developed for the Defense Program Transportation Risk Assessment (DPTRA). Many simplifying assumptions are required to make the subject problem tractable. MELTER incorporates modeling which balances the competing requirements of execution speed, generality, completeness of essential physics, and robustness. Input parameters affecting the analysis include those defining the fire scenario, those defining the cargo loaded in the SST, and those defining properties of the SST. For a specified fire, SST, and cargo geometry MELTER predicts the critical fire duration that will lead to a failure. The principal features of the analysis include: (a) Geometric considerations to interpret fire-scenario descriptors in terms of a thermal radiation boundary condition, (b) a simple model of the SST's wall combining the diffusion model for radiation through optically-thick media with an endothermic reaction front to describe the charring of dimensional, rigid foam in the SST wall, (c) a transient radiation enclosure model, (d) a one-dimensional, spherical idealization of the shipped cargos providing modularity so that cargos of interest can be inserted into the model, and (e) associated numerical methods to integrate coupled, differential equations and find roots

ATMX-600 rail car safety analysis report for packaging (SARP)

International Nuclear Information System (INIS)

Adcock, F.E.; McCarthy, J.D.

1977-01-01

The ATMX-600 series rail car is used by Rockwell International, Rocky Flats Plant, for shipping low-level radioactive waste under the provisions of DOT Special Permit 5948. Fissile Class I shipments are authorized with the car loaded to capacity with drums containing up to 200 grams of plutonium-239. Inner packaging may be polyethylene-lined steel drums or fiberglass-coated plywood crates. These massive double-walled steel cars provide the equivalent protection of a Type B package. Rapid loading and unloading of the 9- by 9- by 50-foot cargo space are accomplished by prepackaging the waste in standard 20-foot steel cargo containers. The ATMX-600 rail car will hold two cargo containers, each carrying seventy 55-gallon drums and up to 44,800 pounds gross weight. This report is a revision of an earlier document and describes improvements to inner packaging. It also reflects current shipping practices

Greater-than-Class C low-level radioactive waste shipping package/container identification and requirements study. National Low-Level Waste Management Program

Energy Technology Data Exchange (ETDEWEB)

Tyacke, M.

1993-08-01

This report identifies a variety of shipping packages (also referred to as casks) and waste containers currently available or being developed that could be used for greater-than-Class C (GTCC) low-level waste (LLW). Since GTCC LLW varies greatly in size, shape, and activity levels, the casks and waste containers that could be used range in size from small, to accommodate a single sealed radiation source, to very large-capacity casks/canisters used to transport or dry-store highly radioactive spent fuel. In some cases, the waste containers may serve directly as shipping packages, while in other cases, the containers would need to be placed in a transport cask. For the purpose of this report, it is assumed that the generator is responsible for transporting the waste to a Department of Energy (DOE) storage, treatment, or disposal facility. Unless DOE establishes specific acceptance criteria, the receiving facility would need the capability to accept any of the casks and waste containers identified in this report. In identifying potential casks and waste containers, no consideration was given to their adequacy relative to handling, storage, treatment, and disposal. Those considerations must be addressed separately as the capabilities of the receiving facility and the handling requirements and operations are better understood.

Prevention of oil spill from shipping by modelling of dynamic risk.

Science.gov (United States)

Eide, Magnus S; Endresen, Oyvind; Breivik, Oyvind; Brude, Odd Willy; Ellingsen, Ingrid H; Røang, Kjell; Hauge, Jarle; Brett, Per Olaf

2007-10-01

This paper presents a new dynamic environmental risk model, with intended use within a new, dynamical approach for risk based ship traffic prioritisation. The philosophy behind this newly developed approach is that shipping risk can be reduced by directing efforts towards ships and areas that have been identified as high priority (high risk), prior to a potential accident. The risk model proposed in this paper separates itself from previous models by drawing on available information on dynamic factors and by focusing on the ship's surroundings. The model estimates the environmental risk of drift grounding accidents for oil tankers in real time and in forecast mode, combining the probability of grounding with oil spill impact on the coastline. Results show that the inherent dynamic risk introduced by an oil tanker sailing along the North Norwegian coast depends, not surprisingly, significantly upon wind and ocean currents, as well as tug position and cargo oil type. Results of this study indicate that the risk model is well suited for real time risk assessment, and effectively separates low risk and high risk situations. The model is well suited as a tool to prioritise oil tankers and coastal segments. This enables dynamic risk based positioning of tugs, using both real-time and projected risk, for effective support in case of a drifting ship situation.

Designing Indonesian Liner Shipping Network

Directory of Open Access Journals (Sweden)

Armand Omar Moeis

2017-06-01

Full Text Available As the largest archipelago nation in the world, Indonesia’s logistics system has not shown excellence according to the parameters of logistics performance index and based on logistics costs percentages from overall GDP. This is due to the imbalances of trading on the western and eastern regions in Indonesia, which impacts the transportation systems costs to and from the eastern regions. Therefore, it is imperative to improve the competitiveness of Indonesian maritime logistics through maritime logistics network design. This research will focus on three levels of decision making in logistics network design, which include type of ships in the strategic level, shipping routes in the tactical level, and container allocation in the operational level with implementing butterfly routes in Indonesia’s logistics networking problems. Furthermore, this research will analyze the impact of Pendulum Nusantara and Sea Toll routes against the company profits and percentages of containers shipped. This research will also foresee how demand uncertainties and multi-period planning should affect decision making in designing the Indonesian Liner Shipping Network.

Cargo response to railcar impact and tiedown load analysis

International Nuclear Information System (INIS)

Bartholomew, R.J.

1978-01-01

An analytical study that investigated the loads produced during coupling of railcars carrying heavy shipping containers is described. The structural model of the impact event is represented by a lumped parameter technique. Each discrete mass lump possesses longitudinal, vertical, and rotational degrees of freedom. The resulting computer simulation provides for nonlinear railcar coupler stiffness and linear damping forces in the coupler and container tiedowns. Results include response to parametric variations in container weight, impact speed, and tiedown stiffness. Container dynamic response and tiedown loads are found to depend heavily on these parameters. Also, railcar bending and subsequent vertical motion are shown to be important contributors to these responses. When experimentally substantiated, the model can serve as a useful tool in the design and evaluation of shipping container tiedown structures

29 CFR 1918.84 - Bulling cargo.

Science.gov (United States)

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Bulling cargo. 1918.84 Section 1918.84 Labor Regulations...) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Handling Cargo § 1918.84 Bulling cargo. (a) Bulling cargo shall be done with the bull line led directly from the heel block. However, bulling may be done from the...

Parametric study of propeller boss cap fins for container ships

Science.gov (United States)

Lim, Sang-Seop; Kim, Tae-Won; Lee, Dong-Myung; Kang, Chung-Gil; Kim, Soo-Young

2014-06-01

The global price of oil, which is both finite and limited in quantity, has been rising steadily because of the increasing requirements for energy in both developing and developed countries. Furthermore, regulations have been strengthened across all industries to address global warming. Many studies of hull resistance, propulsion and operation of ships have been performed to reduce fuel consumption and emissions. This study examined the design parameters of the propeller boss cap fin (PBCF) and hub cap for 6,000TEU container ships to improve the propulsion efficiency. The design parameters of PBCF have been selected based on the geometrical shape. Computational fluid dynamics (CFD) analysis with a propeller open water (POW) test was performed to check the validity of CFD analysis. The design of experiment (DOE) case was selected as a full factorial design, and the experiment was analyzed by POW and CFD analysis. Analysis of variance (ANOVA) was performed to determine the correlation among design parameters. Four design alternatives of PBCF were selected from the DOE. The shape of a propeller hub cap was selected as a divergent shape, and the divergent angle was determined by the DOE. Four design alternatives of PBCF were attached to the divergent hub cap, and the POW was estimated by CFD. As a result, the divergent hub cap with PBCF has a negative effect on the POW, which is induced by an increase in torque coefficient. A POW test and cavitation test were performed with a divergent hub cap with PBCF to verify the CFD result. The POW test result showed that the open water efficiency was increased approximately 2% with a divergent hub cap compared to a normal cap. The POW test result was similar to the CFD result, and the divergent hub cap with the PBCF models showed lower open water efficiency. This was attributed to an increase in the torque coefficient just like the CFD results. A cavitation test was performed using the 2 models selected. The test result showed

Accelerator requirements for fast-neutron interrogation of luggage and cargo

International Nuclear Information System (INIS)

Micklich, B.J.; Fink, C.L.; Yule, T.J.

1995-01-01

Several different fast-neutron based techniques are being studied for the detection of contraband substances in luggage and cargo containers. The present work discusses the accelerator requirements for fast-neutron transmission spectroscopy (FNTS), pulsed fast-neutron analysis (PFNA), and 14-MeV neutron interrogation. These requirements are based on the results of Monte-Carlo simulations of neutron or gamma detection rates. Accelerator requirements are driven by count-rate considerations, spatial resolution and acceptable uncertainties in elemental compositions. The authors have limited their analyses to luggage inspection with FNTS and to cargo inspection with PFNA or 14-MeV neutron interrogation

A cargo-sorting DNA robot.

Science.gov (United States)

Thubagere, Anupama J; Li, Wei; Johnson, Robert F; Chen, Zibo; Doroudi, Shayan; Lee, Yae Lim; Izatt, Gregory; Wittman, Sarah; Srinivas, Niranjan; Woods, Damien; Winfree, Erik; Qian, Lulu

2017-09-15

Two critical challenges in the design and synthesis of molecular robots are modularity and algorithm simplicity. We demonstrate three modular building blocks for a DNA robot that performs cargo sorting at the molecular level. A simple algorithm encoding recognition between cargos and their destinations allows for a simple robot design: a single-stranded DNA with one leg and two foot domains for walking, and one arm and one hand domain for picking up and dropping off cargos. The robot explores a two-dimensional testing ground on the surface of DNA origami, picks up multiple cargos of two types that are initially at unordered locations, and delivers them to specified destinations until all molecules are sorted into two distinct piles. The robot is designed to perform a random walk without any energy supply. Exploiting this feature, a single robot can repeatedly sort multiple cargos. Localization on DNA origami allows for distinct cargo-sorting tasks to take place simultaneously in one test tube or for multiple robots to collectively perform the same task. Copyright © 2017, American Association for the Advancement of Science.

Tension in the tie-down chains of a shipping container for hazardous material

International Nuclear Information System (INIS)

Lo, T.Y.

1995-01-01

Chains are frequently used to tie the shipping containers of hazardous material to a truck bed. The tie-down system is nonlinear when the container is subjected to a triaxial force during transit. It is nonlinear because chains cannot carry compressive force, and the base of the container may partially lift off from the truck bed. A method was developed to calculate the amount of tension in the chains. This methodology includes three assumptions: (1) No friction exists between the container and the truck bed; (2) The container and the truck bed are rigid; and (3) All chains are properly tightened (i.e., no slacks) during preparation for shipment. The methodology employs an iterative process of a linear tie-down system. This linear system is derived from the nonlinear system with two additional assumptions: (a) All chains can carry compression as well as tension; and (b) There is a point contact between the container and the truck bed. This linear system has a closed-form solution. After the first solution of the linear system is obtained, the unreasonable, or physically impossible, rotational degree of freedom of the container and the chains with compressive force are eliminated in the follow-up iterative calculations using the same linear system. Unreasonable rotation is detected when the results indicate a rotation of the container into the truck bed. Zero rotational value is assigned to this degree of freedom in the follow-up iterations. For chains under compression, the chain length is replaced with a fictitiously large value because a long chain carries essentially no load. This process usually needs only two or three iterations and can easily be carried out in a spread sheet using such programs as Microsoft Excel or LOTUS 123

Evaluation difference between mass of received cargo and mass of handed over the cargo in the determination of the masses by draft survey

Directory of Open Access Journals (Sweden)

Yakuta I. V.

2016-12-01

Full Text Available The paper provides the analysis of problems associated with the evaluation of difference between the mass of received and handed over cargo in determining the masses by draft survey and due to the difference in the measurement conditions at the loading and unloading ports (due to the change errors in various stages of the measurement procedures. The errors that may arise in determining the mass of the cargo due to roughness when measuring draft, due to using the inclinometer to determine the draft from one of boards, due to instrumental errors in the determination of the density of seawater, due to other possible errors have been investigated and evaluated. To estimate the errors of draft due to heaving and errors of inclinometer some formula are to be applied, their derivation has been done in this paper. It has been recommended to use the traditional formula of high-speed drawdown with the replacement of vessel speed on current rate to calculate the error of precipitation arising from the drawdowns ship on a current. The value per unit displacement draft from loading scale has been used to evaluate the error of the displacement appearing in the presence of draft errors. As a result two similar criteria (rigorous and statistical of allowable discrepancies calculated by draft survey mass of cargo in the port of loading and port of discharge have been substantiated. These criteria require the calculation and accumulation in a table of all the errors and calculate the total error of displacement. Criteria will allow the consignee and the carrier come to a reasonable and agreed decision about the significance of differences of the masses taking into account the indifference of conditions and measuring instruments.

Estimating particle release through gas leaks in dry powder shipping containers

International Nuclear Information System (INIS)

Schwendiman, L.C.

1977-06-01

Information is presented from which an estimate can be made of the release of plutonium oxide from shipping containers. The leak diameter is estimated from gas leak tests of the container and an estimate is made of gas leak rate as a function of pressure over the time of interest in the accident. These calculations are limited in accuracy because of assumptions regarding leak geometry and the basic formulations of hydrodynamic flow for the assumed conditions. Sonic flow is assumed to be the limiting gas flow rate. Particles leaking from the air space above the powder will be limited by the low availability of particles due to rapid settling, the very limited driving force (pressure buildup) during the first minute, and the deposition in the leak channel. Equations are given to estimate deposition losses. Leaks of particles occurring below the level of the bulk powder will be limited by mechanical interference when leaks are of dimension smaller than particle sizes present. Some limiting cases can be calculated. When the leak dimension is large compared to the particle sizes present, maximum particle releases can be estimated, but will be very conservative. Further theoretical and experimental studies are needed to better define the hydrodynamics of gas flow in leaks of the size being considered, and to establish particle transport rates through known geometry leak paths

A review of outbreaks of waterborne disease associated with ships: evidence for risk management.

Science.gov (United States)

Rooney, Roisin M; Bartram, Jamie K; Cramer, Elaine H; Mantha, Stacey; Nichols, Gordon; Suraj, Rohini; Todd, Ewen C D

2004-01-01

The organization of water supply to and on ships differs considerably from that of water supply on land. Risks of contamination can arise from source water at the port or during loading, storage, or distribution on the ship. The purpose of this article is to review documented outbreaks of waterborne diseases associated with passenger, cargo, fishing, and naval ships to identify contributing factors so that similar outbreaks can be prevented in the future. The authors reviewed 21 reported outbreaks of waterborne diseases associated with ships. For each outbreak, data on pathogens/toxins, type of ship, factors contributing to outbreaks, mortality and morbidity, and remedial action are presented. The findings of this review show that the majority of reported outbreaks were associated with passenger ships and that more than 6,400 people were affected. Waterborne outbreaks due to Enterotoxigenic Escherichia coli, noroviruses, Salmonella spp, Shigella sp, Cryptosporidium sp, and Giardia lamblia occurred on ships. Enterotoxigenic E. coli was the pathogen most frequently associated with outbreaks. One outbreak of chemical water poisoning also occurred on a ship. Risk factors included contaminated port water, inadequate treatment, improper loading techniques, poor design and maintenance of storage tanks, ingress of contamination during repair and maintenance, cross-connections, back siphonage, and insufficient residual disinfectant. Waterborne disease outbreaks on ships can be prevented. The factors contributing to outbreaks emphasize the need for hygienic handling of water along the supply chain from source to consumption. A comprehensive approach to water safety on ships is essential. This may be achieved by the adoption of Water Safety Plans that cover design, construction, operation, and routine inspection and maintenance.

Thermo-hydraulic characteristics of ship propulsion reactor in the conditions of ship motions and safety assessment

International Nuclear Information System (INIS)

Kobayashi, Michiyuki; Aya, Izuo; Inasaka, Fujio; Murata, Hiroyuki; Odano, Naoteru; Shiozaki, Koki

1998-01-01

A research project from 1995-1999 had a plan to make experimental studies on (1) safety of nuclear ship loaded with an integral ship propulsion reactor (2) effects of pulsating flow on the thermo-hydraulic characteristics of ship propulsion reactor and (3) thermo-hydraulic behaviors of the reactor container at the time of accident in a passively safe ship propulsion reactor. Development of a data base for ship propulsion reactor was attempted using previous experimental data on the thermo-hydraulic characteristics of the reactor in the institute in addition to the present results aiming to make general analytical evaluation for the safety of the engineering-simulation system for nuclear ship. A general data base was obtained by integrating the data list and the analytical program for static characteristics. A test equipment which allows to visualize the pulsating flow was produced and visualization experiments have started. (M.N.)

Mathematical Ship Modeling for Control Applications

DEFF Research Database (Denmark)

Perez, Tristan; Blanke, Mogens

2002-01-01

In this report, we review the models for describing the motion of a ship in four degrees of freedom suitable for control applications. We present the hydrodynamic models of two ships: a container and a multi-role naval vessel. The models are based on experimental results in the four degrees...

Optimization of hydrocyclone geometry for ballast water treatment of crude oil ships; Otimizacao da geometria de hidrociclones para o tratamento de aguas de lastro de navios petroleiros

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Andre G.; Medronho, Ricardo A. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica

2004-07-01

An oil ship when discharge its load, pumps water of the sea for its ballast tanks. This water has the function of maintaining balance, stability and the structural integrity, especially when the oil tank is empty of cargo. Thus, organisms and sediments presents in the water are pumped for the interior of the ballast tanks, being transferred from its natural habitat to another one. This may cause serious ecological unbalances. Hydrocyclone are very efficient and, as they produce high capacities, they seem to be appropriated for ballast water treatment. In this work, computational fluid dynamics (CFD) was used to optimize the geometry of a hydrocyclone, aiming to maximize the separation of the suspended solids present in seawater. A oil ship of 150,000 tons of gross cargo was used as a model. This ship has a ballast capacity of 45,000 m{sup 3} and requires 10 h for filling its ballast tanks. To ballast this ship it would be necessary a battery of 795 hydrocyclones in parallel, having each hydrocyclone a diameter of 8,5 cm. The simulation produced an total efficiency of 99% when treating suspended solids with sizes ranging from 10 to 2500 {mu}m, with a 1.06 g cm-3 density. (author)

A Survey of Empty Container Flow Balance in Turkish Ports

Directory of Open Access Journals (Sweden)

Ünal ÖZDEMİR

2015-11-01

Full Text Available Container transportation is the most preferred maritime commercial freight distribution in entire world except liquefied product transportation by tankers and bulk carriers. Totally 95% volume of general cargo is transported by container ships in the world due to fast, cheap and safe carrying potential of the goods transfer. Containerization has become recent phenomena in the field of maritime transportation and the quantity of goods transported by containers is increasing day by day as well as the total container number to use for the commercial activity. Due to very high mobility in the field of container transportation, port traffic estimation, availability of containers, storage, deposition and allocation of empty containers have become recent problems in maritime transportation area. In this study some major container ports of Turkey which are stand for 80 % of total container operations are analyzed to seek for empty container balance. After detailed statistical evaluation of national container transportation figures for Haydarpaşa, Kumport, İzmir, Mardaş, Marport and Mersin, several interviews and discussions have been made with port authorities and governing departments. As a result, it is observed that there is no empty container accumulation problem in the examined ports except Haydarpaşa and Kumport. Based on general statistics, Turkish container ports currently do not suffer from empty container problem as overall container circulation close to equilibrium but the problem has a potential to create a risk on developing international trade of Turkey.

Outbreak of ciguatera fish poisoning on a cargo ship in the port of hamburg.

Science.gov (United States)

Schlaich, Clara; Hagelstein, Jan-Gerd; Burchard, Gerd-Dieter; Schmiedel, Stefan

2012-07-01

Ciguatera fish poisoning is a travel-related illness characterized by a combination of gastrointestinal and neurological symptoms in persons who eat ciguatoxic seafood in endemic areas. In 2009, an outbreak of the disease on a refrigerator vessel in the port of Hamburg was investigated. The ship's crew fell ill after they ate fish from a catch in the Caribbean 2 weeks earlier. All 15 sailors on board were examined by port medical officers. Samples of blood and stool specimens were taken from symptomatic sailors. The frozen fish was secured for the prevention of further disease spreading and additional diagnostic tests. All but one sailor ate the fish. The intoxication resulted in gastrointestinal or neurological symptoms in all 14 sailors who consumed the fish and persisted in varying degrees in 93% of sailors over at least 14 days. No fatality occurred, but two seamen were "unfit for duty" on the ship due to severity of symptoms. The diagnosis was supported by the fact that all seafarers who consumed the same reef fish, experienced typical signs, symptoms, and time course consistent with ciguatera fish poisoning. The fish from the catch in the Caribbean was identified as Caranx sexfasciatus (Bigeye Trevally) and Cephalopholis miniata (Red Grouper). An experimental assay later confirmed presence of the ciguatoxin in the fish. Sailors are an occupational group at risk for ciguatera fish poisoning due to potentially unsafe food sources during international travel. Even if no fatality occurred, the disease affected marine operations due to high attack rates and chronicity of symptoms. Medical doctors must be aware that ciguatera fish poisoning is a risk for seafarers traveling in tropical and subtropical areas. Stocking of food in affected ports from safe sources, adequate training of ship cooks, and informing sailors about the risk of fishing are needed to prevent disease occurrence in seafarers in international trade and traffic. © 2012 International Society of

Prototypic fabrication of TRIGA irradiated fuel shipping casks

International Nuclear Information System (INIS)

Kim, B.K.; Lee, Y.W.; Whang, C.K.; Lee, J.B.

1980-01-01

This is the safety analysis report on the prototypic fabrication of ''TRIGA Irradiated Fuel Shipping Cask'' conducted by KAERI in 1980. The results of the evaluation show that the shipping cask is in compliance with the applicable regulation for the normal conditions of transport as well as hypothetical accident conditions. The prototypic fabrication of the shipping cask (type B) was carried out for the first time in Korea after getting technical experience from fabrication of the ''TRIGA Spent Fuel Shipping Cask'' and ''the KO-RI Unit 1 surveillance capsule shipping cask'' in 1979. This report contains structural evaluation, thermal evaluation, shielding, criticality, quality assurance, and handling procedures of the shipping cask

Study on Developing a System with IP Functionality to Monitor the Status of Containers in Maritime Logistics

Directory of Open Access Journals (Sweden)

Tae Hoon Kim

2017-12-01

Full Text Available There has been increasing demand from consignors and shipping companies for real-time monitoring of maritime cargo due to increases in fresh, dangerous, and high-value cargo. Although larger carriers have developed and integrated their own systems for such real-time monitoring services, small- and medium-sized shippers are struggling with the heavy costs and workforce associated with such capability. This study introduces a system that can do real-time monitoring of the location of shipping containers and their internal status by using IP-RFID that in cludes IP functionality. This system is composed of a tag, a smart point, and a service platform.  The monitoring tags are attached to regular containers to track the opening and closing of the doors, the internal temperature, and humidity. The tags then send the data to the smart point where the GPS information is added. The data packet is then finally transmitted to the service platform for location tracking.  In particular, as the tags in this system have IP functionality like Multicast, they are capable of communicating with the users and also allow users to control them. In order to provide such functionality, the smart points can serve as a gateway between the service platform and the tag. By managing the tag’s connection information and the status of transmission at the smart point, the service platform can directly communicate with tags connected to the respective smart point. This technology could be applied in a diverse range of maritime and non-maritime areas including warehouse management. As for maritime logistics, it also often goes through ground, port, and air transportation phases. Further studies should monitor the actual performance of this equipment across the various phases of maritime logistics to empirically test the systems proposed herein.

Distributed propulsion for ships

OpenAIRE

Nylund, Vilde

2017-01-01

It is anticipated that using distributed electric propulsion (DEP) on conventional ships will increase the total propulsive efficiency. This is mainly due to two reasons; firstly, because the total propeller disk area can be increased. Secondly, because each propeller can be optimised for the local wake where it is operating. In this work, the benefits of using DEP has been investigated for a 14 000 TEU container ship. Based on a literary study of the present state of propeller modelling ...

46 CFR 98.25-75 - Ventilation.

Science.gov (United States)

2010-10-01

... shall be fitted with efficient natural or mechanical ventilation. (b) Enclosed compartments in which... 46 Shipping 4 2010-10-01 2010-10-01 false Ventilation. 98.25-75 Section 98.25-75 Shipping COAST... Ventilation. (a) All enclosed spaces containing cargo tanks fitted with bottom outlet connections shall be...

Impact limiter design for a lightweight tritium hydride vessel transport container

International Nuclear Information System (INIS)

Harding, D.C.; Longcope, D.B.; Neilsen, M.K.

1995-01-01

Sandia National Laboratories (SNL) has designed an impact-limiting system for a small, lightweight radioactive material shipping container. The Westinghouse Savannah River Company (WSRC) is developing this Type B package for the shipment of tritium, replacing the outdated LP-50 shipping container. Regulatory accident resistance requirements for Type B packages, including this new tritium package, are specified in 10 CFR 71 (NRC 1983). The regulatory requirements include a 9-meter free drop onto an unyielding target, a 1-meter drop onto a mild steel punch, and a 30-minute 800 degrees C fire test. Impact limiters are used to protect the package in the free-drop accident condition in any impact orientation without hindering the package's resistance to the thermal accident condition. The overall design of the new package is based on a modular concept using separate thermal shielding and impact mitigating components in an attempt to simplify the design, analysis, test, and certification process. Performance requirements for the tritium package's limiting system are based on preliminary estimates provided by WSRC. The current tritium hydride vessel (THV) to be transported has relatively delicate valving assemblies and should not experience acceleration levels greater than approximately 200 g's. A thermal overpack and outer stainless steel shell, to be designed by WSRC, will form the inner boundary of the impact-limiting system (see Figure 1). The mass of the package, including cargo, inner container, thermal overpack, and outer stainless steel shell (not including impact limiters) should be approximately 68 kg. Consistent with the modular design philosophy, the combined thermal overpack and containment system should be considered essentially rigid, with the impact limiters incurring all deformation

Characterizing X-ray Attenuation of Containerized Cargo

Energy Technology Data Exchange (ETDEWEB)

Birrer, N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Divin, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Glenn, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Martz, H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wang, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-08-02

X-ray inspection systems can be used to detect radiological and nuclear threats in imported cargo. In order to better understand performance of these systems, the attenuation characteristics of imported cargo need to be determined. This project focused on developing image processing algorithms for segmenting cargo and using x-ray attenuation to quantify equivalent steel thickness to determine cargo density. These algorithms were applied to over 450 cargo radiographs. The results are summarized in this report.

Spent fuel shipping cask sealing concepts

International Nuclear Information System (INIS)

Sonnier, C.S.

1989-05-01

In late 1985, the International Atomic Energy Agency (IAEA) requested the US Program for Technical Assistance to IAEA Safeguards (POTAS) to provide a study which examined sealing concepts for application to spent fuel shipping casks. This request was approved, and assigned to Sandia National Laboratories (Sandia). In the course of this study, discussions were held with personnel in the International Safeguards Community who were familiar with the shipping casks used in their States. A number of shipping casks were examined, and discussions were held with two shipping cask manufacturers in the US. As a result of these efforts, it was concluded that the shipping casks provided an extremely good containment, and that many of the existing casks can be effectively sealed by applying the seal to the cask closure bolts/nuts

TMI-2 spent fuel shipping

International Nuclear Information System (INIS)

Quinn, G.J.; Burton, H.M.

1985-01-01

TMI-2 failed fuel will be shipped to the Idaho National Engineering Laboratory for use in the DOE Core Examination Program. The fuel debris will be loaded into three types of canisters during defueling and dry loaded into a spent fuel shipping cask. The cask design accommodates seven canisters per cask and has two separate containment vessels with ''leaktight'' seals. Shipments are expectd to begin in early 1986

Performance Monitoring of Ships

DEFF Research Database (Denmark)

Hansen, Søren Vinther

is used as input to the system and by comparing model and ship behaviour, an index describing the ship’s performance is generated. The work in this thesis is based on data logged through the automation system on board a PostPanmax container ship where data have been logged through a year. A routine...... in the models have been identified. The models used in this work are based on empirical relations or based on regression analyses of model tests and full-scale trials. In order to achieve valid results the conditions where performance is estimated have to be inside the boundaries of the model. Filters have been......The purpose of the research project is to establish a reliable index in the performance evaluation of ships. During operation the ship will experience added resistance due to fouling of hull and propeller. The added resistance will lead to increased fuel consumption and thus increased emissions...

Thermo-hydraulic characteristics of ship propulsion reactor in the conditions of ship motions and safety assessment

International Nuclear Information System (INIS)

Kobayashi, Michiyuki; Murata, Hiroyuki; Sawada, Kenichi; Inasaka, Fujio; Aya, Izuo; Shiozaki, Koki

1999-01-01

By inputting the experimental data, information and others on thermo-hydraulic characteristics of integrated ship propulsion reactor accumulated hitherto by the Ship Research Institute and some recent cooperation results into the nuclear ship engineering simulation system, it was conducted not only to contribute an improvement study on next ship reactor by executing general analysis and evaluation on motion characteristics under ship body motion conditions, safety at accidents, and others of the integrated ship reactor but also to investigate and prepare some measures to apply fundamental experiment results based on obtained here information to safety countermeasure of the nuclear ships. In 1997 fiscal year, on safety of the integrated ship propulsion reactor loading nuclear ship, by adding experimental data on unstable flow analysis and information on all around of the analysis to general data base fundamental program, development to intellectual data base program was intended; on effect of pulsation flow on thermo-hydraulic characteristics of ship propulsion reactor; after pulsation flow visualization experiment, experimental equipment was reconstructed into heat transfer type to conduct numerical analysis of pulsation flow by confirming validity of numerical analysis code under comparison with the visualization experiment results; and on thermo-hydraulic behavior in storage container at accident of active safety type ship propulsion reactor; a flashing vibration test using new apparatus finished on its higher pressurization at last fiscal year to examine effects of each parameter such as radius and length of exhausting nozzle and pool water temperature. (G.K.)

Investigation into the feasibility of alternative plutonium shipping forms

International Nuclear Information System (INIS)

Mishima, J.; Lindsey, C.G.

1983-06-01

Pacific Northwest Laboratory (PNL), operated for the Department of Energy by the Battelle Memorial Institute, is conducting a study for the Nuclear Regulatory Commission on the feasibility of altering current plutonium shipping forms to reduce or eliminate the airborne dispersibility of PuO 2 which might occur during a shipping accident. Plutonium used for fuel fabrication is currently shipped as a PuO 2 powder with a significant fraction in the respirable size range. If the high-strength container is breached due to stresses imposed during a transportation accident, the PuO 2 powder could be subject to airborne dispersion. The available information indicated that a potential accident involving fire accompanied by crush/impact forces would lead to failure of current surface shipping containers (no assumptions were made on the possibility of such a severe accident). Criteria were defined for an alternate shipping form to mitigate the effects of such an accident. Candidate techniques and materials were evaluated as alternate shipping forms by a task team consisting of personnel from PNL and Rockwell Hanford Operations (RHO). At this time, the most promising candidate for an alternate plutonium shipping form appears to be pressing PuO 2 into unsintered (green) pellets. These green pellets satisfy the criteria for a less dispersible form without requiring significant process changes. Discussions of all candidates considered are contained in a series of appendices. Recommendations for further investigations of the applicability of green pellets as an alternate shipping form are given, including the need for a cost-benefit study

46 CFR 340.5 - Containers and chassis.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Containers and chassis. 340.5 Section 340.5 Shipping... ALLOCATION OF SHIPPING SERVICES, CONTAINERS AND CHASSIS, AND PORT FACILITIES AND SERVICES FOR NATIONAL SECURITY AND NATIONAL DEFENSE RELATED OPERATIONS § 340.5 Containers and chassis. (a) When a defense agency...

Acid-Labile Acyclic Cucurbit[n]uril Molecular Containers for Controlled Release.

Science.gov (United States)

Mao, Dake; Liang, Yajun; Liu, Yamin; Zhou, Xianhao; Ma, Jiaqi; Jiang, Biao; Liu, Jia; Ma, Da

2017-10-02

Stimuli-responsive molecular containers are of great importance for controlled drug delivery and other biomedical applications. A new type of acid labile acyclic cucurbit[n]uril (CB[n]) molecular containers is presented that can degrade and release the encapsulated cargo at accelerated rates under mildly acidic conditions (pH 5.5-6.5). These containers retain the excellent recognition properties of CB[n]-type hosts. A cell culture study demonstrated that the cellular uptake of cargos could be fine-tuned by complexation with different containers. The release and cell uptake of cargo dye was promoted by acidic pH. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Size matters: Exploring the importance of vessel characteristics to inform estimates of shipping emissions

International Nuclear Information System (INIS)

Walsh, Conor; Bows, Alice

2012-01-01

Highlights: ► Ship emission baselines can be used to inform studies but require prior knowledge. ► Region specific conditions alter average shipping emission factors. ► Region specific conditions are clearer when individual callings are examined. ► Relationship between ship size and emissions frustrates estimating mean emissions. -- Abstract: The decarbonisation agenda is placing increasing pressure on retailers to directly and indirectly influence greenhouse gas emissions associated with full supply chains. Transportation by sea is an important and significant element of these supply chains, yet the emissions associated with shipping, particularly international shipping, are often poorly accounted for. The magnitude of emissions embodied in a product is directly related to the distances involved in globalised product chains, where shipping can represent the most emission intensive stage per tonne of goods transported. Specifically, limited choice of ship type and size within assessment tools negates a fair estimate of product chain emissions. To address this, the correlation between ship emissions and size is quantified for a sample of United Kingdom (UK) port callings to estimate typical UK emission factors by ship type and size and to determine how well existing global data and available databases represent UK shipping activity. The results highlight that although ship type is a crucial determinant of emissions, vessel size is also important, particularly for smaller ships where the variance in emission factors is greatest. Existing, globally averaged data correlating ship size with emissions agree well with the UK data. However, the relatively higher proportion of smaller ships satisfying a UK demand for short sea shipping results in a skew towards higher typical emission factors, principally within the general cargo, product and chemical tanker categories. This bias is most visible when emissions per individual ship calling are estimated. Incorporating

Amplicon-Based Pyrosequencing Reveals High Diversity of Protistan Parasites in Ships' Ballast Water: Implications for Biogeography and Infectious Diseases.

Science.gov (United States)

Pagenkopp Lohan, K M; Fleischer, R C; Carney, K J; Holzer, K K; Ruiz, G M

2016-04-01

Ships' ballast water (BW) commonly moves macroorganisms and microorganisms across the world's oceans and along coasts; however, the majority of these microbial transfers have gone undetected. We applied high-throughput sequencing methods to identify microbial eukaryotes, specifically emphasizing the protistan parasites, in ships' BW collected from vessels calling to the Chesapeake Bay (Virginia and Maryland, USA) from European and Eastern Canadian ports. We utilized tagged-amplicon 454 pyrosequencing with two general primer sets, amplifying either the V4 or V9 domain of the small subunit (SSU) of the ribosomal RNA (rRNA) gene complex, from total DNA extracted from water samples collected from the ballast tanks of bulk cargo vessels. We detected a diverse group of protistan taxa, with some known to contain important parasites in marine systems, including Apicomplexa (unidentified apicomplexans, unidentified gregarines, Cryptosporidium spp.), Dinophyta (Blastodinium spp., Euduboscquella sp., unidentified syndinids, Karlodinium spp., Syndinium spp.), Perkinsea (Parvilucifera sp.), Opisthokonta (Ichthyosporea sp., Pseudoperkinsidae, unidentified ichthyosporeans), and Stramenopiles (Labyrinthulomycetes). Further characterization of groups with parasitic taxa, consisting of phylogenetic analyses for four taxa (Cryptosporidium spp., Parvilucifera spp., Labyrinthulomycetes, and Ichthyosporea), revealed that sequences were obtained from both known and novel lineages. This study demonstrates that high-throughput sequencing is a viable and sensitive method for detecting parasitic protists when present and transported in the ballast water of ships. These data also underscore the potential importance of human-aided dispersal in the biogeography of these microbes and emerging diseases in the world's oceans.

Game-Theoretic Comparison Approach for Intercontinental Container Transportation: A Case between China and Europe with the B&R Initiative

Directory of Open Access Journals (Sweden)

Xi Chen

2017-01-01

Full Text Available This paper develops a game-theoretic model to analyze the competition between two container freight transportation modes (shipping and railway using competitive game strategic interactions method, namely, deterrence, by taking account of the most cost-effective scale of the transportation capacity settings. The competition was set against the background of China’s Belt and Road (B&R Initiative as a new situation for intercontinental Sino-Europe container freight transportation. The behavior of each mode (modeled as a carrier, resp. is characterized by an optimization model with the objective of minimizing its cost by setting optimal basic freight rate and transportation deployment. A firm can use this method to compare the difference in the time value of the cargos and reduce the expense during the whole transportation process. Finally, the developed model is numerically evaluated by a case study of intercontinental transportation between Hefei (China and Hamburg (Germany. The results show that deterrence effects largely depend on the deterrence objective, and the differential in the cost of two transportation modes tends to be stable with higher values in the deterrence objective. In the new intercontinental circumstance, the mode of railway transportation provides a new way to transport the cargos between China and Europe.

First experiment on liquid hydrogen transportation by ship inside Osaka bay

Science.gov (United States)

Maekawa, K.; Takeda, M.; Hamaura, T.; Suzuki, K.; Miyake, Y.; Matsuno, Y.; Fujikawa, S.; Kumakura, H.

2017-12-01

A project to import a large amount of liquid hydrogen (LH2) from Australia by a cargo carrier, which is equipped with two 1250 m3 tanks, is underway in Japan. It is important to understand sloshing and boil-off characteristics inside the LH2 tank during marine transportation. However, the LH2 sloshing and boil-off characteristics on the sea have not yet been clarified. First experiment on the LH2 transportation of 20 liter with magnesium diboride (MgB2) level sensors by the training ship “Fukae-maru”, which has 50 m long and 449 ton gross weight, was carried out successfully inside Osaka bay on February 2, 2017. In the experiment, synchronous measurements of liquid level, temperature, pressure, ship motions, and accelerations as well as the rapid depressurization test were done. The increase rate of the temperature and the pressure inside the LH2 tank were discussed under the rolling and the pitching conditions.

Acoustic Multipurpose Cargo Transfer Bag

Science.gov (United States)

Baccus, Shelley

2015-01-01

The Logistics Reduction (LR) project within the Advanced Exploration Systems (AES) program is tasked with reducing logistical mass and repurposing logistical items. Multipurpose Cargo Transfer Bags (MCTB) are designed to be the same external volume as a regular cargo transfer bag, the common logistics carrier for the International Space Station. After use as a cargo bag, the MCTB can be unzipped and unfolded to be reused. This Acoustic MCTBs transform into acoustic blankets after the initial logistics carrying objective is complete.