WorldWideScience

Sample records for construction paints results

  1. Painting

    DEFF Research Database (Denmark)

    Petersen, Anne Ring

    2012-01-01

    and discursive battles over the essentially self-reflective question of “What is painting?” Over the last decades it has also become an intermedial laboratory in which artists experiment with developing a connective aesthetic in the interface between painting and other media. Accordingly, it is has become...

  2. Use of engineered nanomaterials in the construction industry with specific emphasis on paints and their flows in construction and demolition waste in Switzerland.

    Science.gov (United States)

    Hincapié, Ingrid; Caballero-Guzman, Alejandro; Hiltbrunner, David; Nowack, Bernd

    2015-09-01

    One sector where the use of engineered nanomaterials (ENMs) is supposed to offer novel or improved functionalities is the construction industry. During the renovation or demolition of buildings, ENMs contained in former construction materials will enter recycling systems or become construction waste. Currently, information about ENM flows in these processes is insufficient. The potential for the release of ENMs from this waste into the environment is unknown, as are the environmental impacts. To evaluate whether there is currently any nano-relevant construction and demolition waste (C&DW) originating from buildings, we evaluated the sources and flows of ENMs in C&DW and identified their potential exposure pathways. A survey of business representatives of Swiss companies in this sector found that ENMs are mainly used in paints and cement. The most frequently used ENMs in the Swiss housing construction industry are nano-TiO2, nano-SiO2, nano-ZnO, and nano-Ag. Using a bottom-up, semi-quantitative approach, we estimated the flows of ENMs contained in paints along the product's life cycle from buildings to recycling and landfill. The flows of ENMs are determined by their associated flows of building materials. We estimated an annual amount of ENMs used in paints of 14t of TiO2, 12t of SiO2, 5t of ZnO, and 0.2t of Ag. The majority of ENMs contained in paints in Switzerland enter recycling systems (23t/y), a smaller amount is disposed directly in landfills (7t/y), and a tiny fraction of ENM waste is incinerated (0.01t/y). Our results allow a qualitative determination of the potential release of ENMs into technical or environmental compartments, with the highest potential release expected during recycling. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Analytical Characterization of Rococo Paintings in Egypt: Preliminary Results from El-Gawhara Palace at Cairo

    Directory of Open Access Journals (Sweden)

    Fatma REFAAT

    2012-12-01

    Full Text Available El-Gawhara palace (1813–1814 AD is situated south of the Mosque of Muhammad Ali in the Cairo Citadel. This palace is an important example of the best early 19th century rococo decorations in Egypt. The present study reports some of the results obtained from the application of different analytical techniques to characterize some rococo paintings at El-Gawhara palace at Cairo, Egypt. The characterization of the studied paintings was carried out by means of optical microscopy (OM, scanning electron microscopy equipped with an energy dispersive X-ray detector (EDS and Fourier transform infrared spectroscopy (FT−IR. The obtained results allowed the identification of the chemical composition, structure and the painting technique employed in these paintings. This methodology reveals some useful information on some rococo paintings dating back to the 19th century in Egypt.

  4. Push-Pull Ventilation in a Painting Shop for Large Steel Constructions

    DEFF Research Database (Denmark)

    Svidt, Kjeld; Heiselberg, Per

    This paper describes the analysis of a push-pull ventilation system for a painting shop that is used for painting steel chimneys and windmill towers.......This paper describes the analysis of a push-pull ventilation system for a painting shop that is used for painting steel chimneys and windmill towers....

  5. [Abstract painting, a mental esthetic construction without exact correspondence with reality (José Guerrero: manuel and corporal expressions in his paintings)].

    Science.gov (United States)

    Portera Sánchez, Alberto

    2006-01-01

    It is desirable that a truthful aesthetic experience should be the consequence of a complete observation detached from all sorts of commercial, social, political or cultural ties. If during this period of admiration of a work of art a personal concentration is reached, the admirer perceives a liberation from all sorts of limiting ties and a rewarding artistic feeling. A similar type of mental freedom must be reached by the artist and prevail during the process of creation which must reach its greatest dimension in abstract paintings because not being illustrations they demand from the spectator a well developed habit to detect its esthetic values, difficult to perceive because they are in the abstract order. The dimensions such as perspective, symmetry, lights and shadows, usually integrated in figurative paintings to create well defined tridimensional spaces are not included in abstractions because this type of geometrical composition is not needed. In contemporary abstraction the design itself has lost its formal meaning and its protagonist role. It is frequently replaced by abrupt gestures as it is the case in the styles named "action painting" (Jackson Pollack) or "abstract expressionism" (Antonio Saura). Other abstract painters close to "minimalism" simply drop the colors on the canvas without any attempt to design but full of aesthetic energy and even single colors uniformly bathe the surface of the linen (Rothko). Other american artists of the sixties (Monis Louis) are also to be admired. They allow that the deposited and sliding colors themselves initiate and finish interesting artistic compositions. They become esential creative agents in the painting without being forced to be figurative nor to follow the creative will of the artist who, is simply acting as the first observer and only intervenes "a posteriori" accepting or rejecting the results. Only the colors and under the single influence of their sliding density create the shapes and artistic

  6. XRF analyses for the study of painting technique and degradation on frescoes by Beato Angelico: first results

    International Nuclear Information System (INIS)

    Mazzinghi, A.

    2014-01-01

    Beato Angelico is one of the most important Italian painters of the Renaissance period, in particular he was a master of the so-called 'Buon fresco' technique for mural paintings. A wide diagnostic campaign with X-Ray Fluorescence (XRF) analyses has been carried out on three masterworks painted by Beato Angelico in the San Marco monastery in Florence: the Crocifissione con Santi, the 'Annunciazione' and the 'Madonna delle Ombre'. The latter is painted by mixing fresco and secco techniques, which makes it of particular interest for the study of two different paintings techniques of the same artist. Then the aim of the study was focused on the characterization of the painting palette, and therefore the painting techniques, used by Beato Angelico. Moreover, the conservators were interested in the study of degradation processes and old restoration treatments. Our analyses have been carried out by means of the XRF spectrometer developed at LABEC laboratory at Istituto Nazionale di Fisica Nucleare in Florence (Italy). XRF is indeed especially suited for such a kind of study, allowing for multi-elemental, nondestructive, non-invasive analyses in a short time, with portable instruments. In this paper the first results concerning the XRF analysis are presented.

  7. From queen to mother: motherhood as discursive construction in the seventeenth century neogranadine painting

    Directory of Open Access Journals (Sweden)

    Juan Pablo Cruz Medina

    2015-01-01

    Full Text Available This article examines motherhood as a discursive construction, linking this construction with the neogranadine visual discourse of the seventeenth century. The image of “The Virgin with the Child”, within the post Tridentine context, stood as a place of origin of a discourse modeling the women behavior, giving specific roles in relation with their children. The tender, loving and protective mother with their children emerges in the visual discourse as a narrative truth that should be adopted by subjects in everyday behavior.

  8. Construction practices: Pulse builder survey results

    Energy Technology Data Exchange (ETDEWEB)

    Kadulski, R

    This paper discusses the results of a nationwide builder survey on common building techniques, such as framing, insulation, airtight construction practices, testing for airtightness, windows, furnaces and water heaters, and ventilation. Results indicate that changes in construction were mainly influenced by the R-2000 program. The spread of R-2000 technology is reflected in the use of higher insulation levels than are called for by codes or than is normal practice, sealing of joints, and attention to air and vapour retarders as well as air tight drywall techniques combined with mechanical ventilation systems.

  9. Painting models

    Science.gov (United States)

    Baart, F.; Donchyts, G.; van Dam, A.; Plieger, M.

    2015-12-01

    The emergence of interactive art has blurred the line between electronic, computer graphics and art. Here we apply this art form to numerical models. Here we show how the transformation of a numerical model into an interactive painting can both provide insights and solve real world problems. The cases that are used as an example include forensic reconstructions, dredging optimization, barrier design. The system can be fed using any source of time varying vector fields, such as hydrodynamic models. The cases used here, the Indian Ocean (HYCOM), the Wadden Sea (Delft3D Curvilinear), San Francisco Bay (3Di subgrid and Delft3D Flexible Mesh), show that the method used is suitable for different time and spatial scales. High resolution numerical models become interactive paintings by exchanging their velocity fields with a high resolution (>=1M cells) image based flow visualization that runs in a html5 compatible web browser. The image based flow visualization combines three images into a new image: the current image, a drawing, and a uv + mask field. The advection scheme that computes the resultant image is executed in the graphics card using WebGL, allowing for 1M grid cells at 60Hz performance on mediocre graphic cards. The software is provided as open source software. By using different sources for a drawing one can gain insight into several aspects of the velocity fields. These aspects include not only the commonly represented magnitude and direction, but also divergence, topology and turbulence .

  10. Mural Painting as Inclusive Art Learning Experience

    Science.gov (United States)

    Ho, Kong

    2010-01-01

    Traditional art education, like other academic disciplines, emphasizes competitiveness and individualism. Through a mural painting curriculum, learners participate in mural art and history appreciation, are active in mural theme or content construction, and engage in hands-on mural design and painting processes. When mural paintings are produced…

  11. Radon exhalation in some building construction materials and effect of plastering and paints on the radon exhalation rate using fired bricks

    International Nuclear Information System (INIS)

    Sharma, Anil; Mahur, A.K.; Rajendra Prasad; Sonkawade, R.G.; Sharma, A.C.

    2013-01-01

    The technological endeavors of human beings have modified the levels of radiation exposure slightly. The emanation of radon is primarily associated with radium and its ultimate precursor uranium. The radiation dose received by human beings from indoor radon and its progeny is the largest of all doses received either by natural or man-made sources. In order to investigate the effect of paints available in the market on the radon exhalation rate from building materials, several bricks were collected. These bricks were plastered with a mixture of cement and sand. Before measurements bricks were dried for 24 hours. These plastered bricks were then coated with white wash and again dried for 1- 2 hours. After drying the bricks were coated with different brands and colors of paints. Radon exhalation rates measurements were carried out for these painted bricks using 'Sealed can Technique' cylindrical plastic 'Can' of 7.5 cm height and 7.0 cm diameter was sealed to the individual samples by plastic can. In each 'Can' a LR-115 type II plastic detector (2 cm 2cm) was fixed at the top inside of the 'Can', such that the sensitive surface of the detector faces the material and is freely exposed to the emergent radon. Radon decays in the volume of the can record the alpha particles resulting from the 218 Po and 214 Po deposited on the inner wall of the 'Can'. Radon and its daughters will reach an equilibrium in concentration after one week or more. Hence the equilibrium activity of the emergent radon can be obtained from the geometry of the can and the time of exposure. The results will be discussed. (author)

  12. The results of spectrographic analysis of pigments from known aboriginal quarries and other outcrops in South Australia, and from painting sites in the Olary district of South Australia

    International Nuclear Information System (INIS)

    Nobbs, J.M.; Nobbs, M.F.; Moyle, D.W.

    1997-01-01

    Full text: Pigments are minerals that provide the colour to paints and the pigments most commonly used by Aboriginal people are derived from red and yellow ochre and white minerals for example, gypsum and kaolin. During the early 1980s, the opportunity arose to collect pigments from many sources in South Australia. The sources included samples from known Aboriginal quarries and other outcrops. Pinhead-size samples of paint were collected from figures in some of the rock painting sites in the Olary District. These samples were analysed using Emission Spectrography with the aim of determining the nature of the pigments that is their constituent elements, and to investigate the possibility of finger-printing the sources of the pigments used by Aboriginal people. The ability of being able to source pigments found on the decorated surface of artefacts; pieces of ochre found in archaeological deposits or painted figures in a rock painting is important for understanding the trading and exchange network known to criss-cross Australia in the past. Facilities for Emission Spectrographic analyses were readily available and the capability to analyse (for twenty six elements) samples in milligram proportions suggested its use for the determination of the composition of material from unlimited sources and the compilation of a data-base detailing the results of the analyses in a form suitable for comparison. Examination of this database could then lead to further investigations with narrower and more specific aims. The results of the spectrographic analyses for red ochre from eighteen sources and yellow ochres from eight sources were tabulated as: strongly present >10%; present 1-10%; strong trace 0.1-1% ; trace 0.01-0.1%; faint trace <0.01%. Major elements, for example iron, aluminium, and silica showed in the Strongly Present and Present categories, while Trace and Faint Trace elements were variable. The results of the analyses of seventeen samples of red pigment and five

  13. Perceptual, semantic and affective dimensions of experience of abstract and representational paintings

    Directory of Open Access Journals (Sweden)

    Marković Slobodan

    2011-01-01

    Full Text Available In this study the difference between representational and abstract paintings in judgments on perceptual, semantic and affective dimensions was investigated. Two groups of participants judged the sets of representational and abstract paintings on three groups of dimensions: perceptual (Form, Color, Space and Complexity, semantic (Illusion-Construction of Reality, Expression, Ideology and Decoration, and affective (Hedonic Tone, Arousal, Relaxation and Regularity. The results have shown that representational paintings have higher judgments on the perceptual dimensions of Form and Complexity, the semantic dimension of the Illusion of Reality (the opposite pole of the Construction of Reality, and the affective dimension of Regularity. On the other hand, abstract paintings have higher judgments on the perceptual dimension of Color, the semantic dimensions of Construction of Reality (the opposite pole of the Illusion of Reality and Expression, and the affective dimension Arousal. A discriminant analysis indicated that all three sets of dimensions are relatively good predictors of the classification of representational and abstract paintings (61-100%. The results suggest that the subjective categorization of paintings is generally based on the recognizability of pictorial content (representational vs. abstract, but some formal or stylistic properties play a role in the categorization, as well: some expressionistic representational paintings were classified in an abstract category, and some geometrically abstract paintings were classified as representational.

  14. A review on paint sludge from automotive industries: Generation, characteristics and management.

    Science.gov (United States)

    Salihoglu, Guray; Salihoglu, Nezih Kamil

    2016-03-15

    The automotive manufacturing process results in the consumption of several natural sources and the generation of various types of wastes. The primary source of hazardous wastes at an automotive manufacturing plant is the painting process, and the major waste fraction is paint sludge, which is classified with EU waste code of 080113* implying hazardous characteristics. The amount of the paint sludge generated increases every year with the worldwide increase in the car production. The characteristics of the paint sludge, which mainly designate the management route, are mainly determined by the type of the paint used, application technique employed, and the chemicals applied such as flocculants, detackifiers, pH boosters, antifoam agents, and biocides as well as the dewatering techniques preferred. Major routes for the disposal of the paint sludges are incineration as hazardous waste or combustion at cement kilns. Because of high dissolved organic carbon content of the paint, the paint sludge cannot be accepted by landfills according to European Union Legislations. More investigations are needed in the field of paint sludge recycling such as recycling it as a new paint or as other formulations, or making use of the sludge for the production of construction materials. Research on the applicability of the paint sludge in composting and biogasification can also be useful. Ongoing research is currently being conducted on new application techniques to increase the effectiveness of paint transfer, which helps to prevent the generation of paint sludge. Advancements in paint and coating chemistry such as the reduction in the coating layers with its thickness also help to decrease the level of paint sludge generation. Investigations on the effects of the chemicals on the recycling potential of paint sludges and consideration of these effects by the chemical manufacturer companies would be extremely important. This review presents the formation of paint sludge, the factors

  15. Empirical Data and Results of the Construct Vadility Studies

    NARCIS (Netherlands)

    Ravaja, N.; de Kort, Y.A.W.; IJsselsteijn, W.A.; Klimmt, C.; Lindley, C.; Mathiak, K.; Turpeinen, M.

    2007-01-01

    In this deliverable, the WP5 partners present the results of the FUGA construct validity studies. The objective of the WP5 was to establish the construct validity of the different potential measures of game experience based on the different measurement techniques. This was the first step to ensure

  16. Microscale radiocarbon dating of paintings

    International Nuclear Information System (INIS)

    Hendriks, Laura; Hajdas, Irka; McIntyre, Cameron; Kueffner, Markus; Ferreira, Ester S.B.; Scherrer, Nadim C.

    2016-01-01

    In this paper, radiocarbon dating of paintings using minimal sample sizes has been investigated, in an effort to address the problem of limited access to sample material in paintings. 14 C analyses were conducted on signed and dated paintings from two Swiss artists of the twentieth century. The selected paintings dated from the 1930s and 1960s, provided the opportunity to evaluate the dating accuracy on paintings realized before and after 1950 AD when the 14 C bomb peak was created, as a result of the nuclear tests conducted in the 1950/1960s. The work focused on the one hand on minimizing the size of the canvas sample required for accelerator mass spectrometer radiocarbon measurement on the gas ion source of the MICADAS and, on the other hand, on testing the possibility of dating the organic binder of the paint. Following careful characterization of the paint composition by X-ray fluorescence spectroscopy, Fourier transformed infrared spectroscopy, and Raman spectroscopy, paints containing no other carbon source than the natural organic binder were identified and dated. (orig.)

  17. Microscale radiocarbon dating of paintings

    Energy Technology Data Exchange (ETDEWEB)

    Hendriks, Laura; Hajdas, Irka; McIntyre, Cameron [ETH Zurich, Ion Beam Physics, Zurich (Switzerland); Kueffner, Markus; Ferreira, Ester S.B. [SIK-ISEA, Zurich, Zurich (Switzerland); Scherrer, Nadim C. [Bern University of Applied Sciences, HKB, Bern (Switzerland)

    2016-03-15

    In this paper, radiocarbon dating of paintings using minimal sample sizes has been investigated, in an effort to address the problem of limited access to sample material in paintings. {sup 14}C analyses were conducted on signed and dated paintings from two Swiss artists of the twentieth century. The selected paintings dated from the 1930s and 1960s, provided the opportunity to evaluate the dating accuracy on paintings realized before and after 1950 AD when the {sup 14}C bomb peak was created, as a result of the nuclear tests conducted in the 1950/1960s. The work focused on the one hand on minimizing the size of the canvas sample required for accelerator mass spectrometer radiocarbon measurement on the gas ion source of the MICADAS and, on the other hand, on testing the possibility of dating the organic binder of the paint. Following careful characterization of the paint composition by X-ray fluorescence spectroscopy, Fourier transformed infrared spectroscopy, and Raman spectroscopy, paints containing no other carbon source than the natural organic binder were identified and dated. (orig.)

  18. The painting technique of the vaulted roof at the Saadian Tomb of Mulay Ahmed Al Mansour: preliminary results

    International Nuclear Information System (INIS)

    Andreotti, A.; Colombini, M. P.; Lluveras, A.; Raihan, M.; Ibnoussina, M.; Tanouti, B.; Boujamid, A.

    2010-01-01

    The Saadian tombs date back from the time of the sultan Ahmed Al Mansour (1578-1603). the tombs have, because of the beauty of their decoration, been a major attraction for visitors of Marrakech. The central mausoleum, the Hall of Twelve Columns, contains the tombs of ahmed Al Mansour and his family. It's dark, lavish, and ornate, with a huge vaulted roof, carved cedar doors and moucharabia (carved wooden screens traditionally to separate the sexes), and gray Italian marble columns. Samples from the painted roof have been collected and are currently under analysis to understand the executive technique used in its decoration. Generally, samples from painted works of art are characterised by the presence of several different organic materials together with pigments, fillers and dryers. A GC-MS analytical procedure for the characterisation of lipids, waxes, resins, pitch, tar, proteinaceous and polysaccharide material in the same paint micro-sample is applied to each collected micro-sample. The analytical procedure is based on a multi step sample pre-treatment that is able to separate the various organic components into different fractions (polysacharide, lipiresinous and proteinaceous), which are separately analyzed by GC-MS after purification and derivatisation. In particuler, this method achieves: -- the identification of proteinaceous binder (egg, collagen, casein) on the basis of the quantitative determination of the amino acid profile processed by principal component analysis -- the identification of lipids (linseed oil, poppy seed oil, walnut oil and egg), plant resins, animal resins,tar or pitches and natural waxes on the basis of the quantitative determination of fatty and dicarboxylic acids, and molecular pattern recognition of alchols and hydrocarbons and terpenic molecular markers -- the identification of th polysaccharide binder( starch, tragacanth gum, arabic gum, fruit tree gum, guar gum, karayagum) on the basis of the quantitative

  19. Statistics Analysis Measures Painting of Cooling Tower

    Directory of Open Access Journals (Sweden)

    A. Zacharopoulou

    2013-01-01

    Full Text Available This study refers to the cooling tower of Megalopolis (construction 1975 and protection from corrosive environment. The maintenance of the cooling tower took place in 2008. The cooling tower was badly damaged from corrosion of reinforcement. The parabolic cooling towers (factory of electrical power are a typical example of construction, which has a special aggressive environment. The protection of cooling towers is usually achieved through organic coatings. Because of the different environmental impacts on the internal and external side of the cooling tower, a different system of paint application is required. The present study refers to the damages caused by corrosion process. The corrosive environments, the application of this painting, the quality control process, the measures and statistics analysis, and the results were discussed in this study. In the process of quality control the following measurements were taken into consideration: (1 examination of the adhesion with the cross-cut test, (2 examination of the film thickness, and (3 controlling of the pull-off resistance for concrete substrates and paintings. Finally, this study refers to the correlations of measurements, analysis of failures in relation to the quality of repair, and rehabilitation of the cooling tower. Also this study made a first attempt to apply the specific corrosion inhibitors in such a large structure.

  20. Some differences between English and Romanian resultative constructions

    Directory of Open Access Journals (Sweden)

    Imola-Ágnes Farkas

    2009-01-01

    Full Text Available It is a generally accepted fact that Romance languages behave differently from English and other Germanic languages as far as the building of resultative constructions is concerned. The wide availability of resultatives in English is in sharp contrast with their less frequent occurrence in Romanian; not to mention the view according to which there are no such constructions in Romanian at all. In the present paper we focus our attention on some differences between the resultatives in English and Romanian. Most importantly, English resultatives can be built on activity, as well as accomplishment matrix verbs; whereas Romanian allows only resultatives built on accomplishment verbs. This approach is consonant with Kayne’s (2005 theory about the existence/non-existence of silent elements in the two (families of languages; we explain this difference between the two languages in terms of the presence/absence of a silent UP TO element.

  1. Radiation safety in radioluminous paint workshop handling tritium activated paint

    International Nuclear Information System (INIS)

    Gaur, P.K.; Venkateswaran, T.V.

    1986-01-01

    This paper discusses the safety features related to a workshop when tritium activated luminous paint is handled by workmen. Salient features of the workshop and the methods employed for monitoring the radiation levels are briefly outlined and results are discussed. The importance of proper ventilation of the workplace and precautions to be taken in the storage of painted articles are highlighted. (author). 1 table, 3 figs

  2. Order-fractal transitions in abstract paintings

    Energy Technology Data Exchange (ETDEWEB)

    Calleja, E.M. de la, E-mail: elsama79@gmail.com [Instituto de Física, Universidade Federal do Rio Grande do Sul, Caixa Postal 15051, 91501-970, Porto Alegre, RS (Brazil); Cervantes, F. [Department of Applied Physics, CINVESTAV-IPN, Carr. Antigua a Progreso km.6, Cordemex, C.P.97310, Mérida, Yucatán (Mexico); Calleja, J. de la [Department of Informatics, Universidad Politécnica de Puebla, 72640 (Mexico)

    2016-08-15

    In this study, we determined the degree of order for 22 Jackson Pollock paintings using the Hausdorff–Besicovitch fractal dimension. Based on the maximum value of each multi-fractal spectrum, the artworks were classified according to the year in which they were painted. It has been reported that Pollock’s paintings are fractal and that this feature was more evident in his later works. However, our results show that the fractal dimension of these paintings ranges among values close to two. We characterize this behavior as a fractal-order transition. Based on the study of disorder-order transition in physical systems, we interpreted the fractal-order transition via the dark paint strokes in Pollock’s paintings as structured lines that follow a power law measured by the fractal dimension. We determined self-similarity in specific paintings, thereby demonstrating an important dependence on the scale of observations. We also characterized the fractal spectrum for the painting entitled Teri’s Find. We obtained similar spectra for Teri’s Find and Number 5, thereby suggesting that the fractal dimension cannot be rejected completely as a quantitative parameter for authenticating these artworks. -- Highlights: •We determined the degree of order in Jackson Pollock paintings using the Hausdorff–Besicovitch dimension. •We detected a fractal-order transition from Pollock’s paintings between 1947 and 1951. •We suggest that Jackson Pollock could have painted Teri’s Find.

  3. Egyptian Tomb Painting.

    Science.gov (United States)

    Schroeder, Liesa

    1999-01-01

    Provides an activity where sixth-grade students replicated the Egyptian art form of tomb painting. Explains that the students researched information about Egyptian culture and history in order to familiarize themselves with Egyptian wall-painting style. Discusses the process of creating tomb paintings in detail. (CMK)

  4. Selective paint coatings for coloured solar absorbers: Polyurethane thickness insensitive spectrally selective (TISS) paints (Part II)

    Energy Technology Data Exchange (ETDEWEB)

    Orel, B.; Spreizer, H.; Surca Vuk, A.; Fir, M. [National Institute of Chemistry, Hajdrihova 19, SI-1000 Ljubljana (Slovenia); Merlini, D.; Vodlan, M. [Color d.d., Cesta komandanta Staneta 4, SI-1230 Medvode (Slovenia); Koehl, M. [Fraunhofer-Institute for Solar Energy Systems ISE, Heidenhofstr. 2, D-79110 Freiburg (Germany)

    2007-01-23

    Red, green and blue paints were prepared for use as thickness insensitive spectrally selective (TISS) paint coatings for solar facade absorbers. The paints were composed of a polyurethane resin binder in which various pigments were incorporated in such a way that they formed stable paint dispersions, satisfying stability criteria for facade coatings. A low emittance of the paints was achieved by using low-emittance aluminium flake pigments combined with iron oxide (red coloured paints). Black pigment was added to adjust solar absorptance. Blue and green paints were made by the addition of coloured aluminium flake pigment and the solar absorptance was also adjusted by the addition of black pigment. Efficiency for photo-thermal conversion of solar radiation was assessed by evaluation of the corresponding performance criteria, which enabled the selection of paints whose performance criteria values were higher than 0 (spectrally non-selective black coating). The results confirmed that blue and green paints and to minor extent red ones, combined selectivity with colour. The morphology of the paints was assessed, revealing that the colours originated from the deposition of finely dispersed colour and/or black pigment on the surface of the aluminium flakes during paint preparation. (author)

  5. Radioactive Decontamination by Strippable Paint

    International Nuclear Information System (INIS)

    Chantaraparprachoom, N.; Mishima, K.

    1998-01-01

    The strippable paint, one of the adhesion method, is to decontaminate solid surface of materials or/and a large area. Two kinds of specimen planchet, SUS 304 stainless steel and polycarbonate plastic, contaminated with radioactive 137 Cs were studied under various conditions. It included surface bottom types, the flat and convex concentric circle type, normal condition at room temperature and overheat condition (∼80 degree celsius). This method used coating paints which contains some elements to have a reaction with radioactive materials selectively. ALARA-Decon clear, Rempack-X200 clear, JD-P5-Mrs.Coat and Pro-Blue-color guard were selected to use as the coating paints. The contaminated surface was coated by the strippable paint under the optimum time, followed by peeling the paint seal. The Rempack-X200 showed the best result, the highest decontamination efficiency which are about 99-100% for all conditions of specimens. The JD-P5 and ALARA-Decon showed good results, which are 98-99% decontamination efficiency for the normal condition set of specimens and about 94-97% for the overheat set of specimens. They can decontaminate polycarbonate specimens better than stainless steel specimens. The Pro-Blue-color guard showed the lowest decontamination efficiency of which 60% for polycarbonate specimens at normal condition and 40%, 30% for stainless steel specimens at normal and overheat conditions respectively. There was no effects of surface bottom types significantly

  6. The NEW detector: construction, commissioning and first results

    Science.gov (United States)

    Nebot-Guinot, M.; NEXT Collaboration

    2017-09-01

    NEXT (Neutrino Experiment with a Xenon TPC) is a neutrinoless double-beta (ββ0ν) decay experiment at the Canfranc Underground Laboratory (LSC). It seeks to detect the ββ0ν decay of Xe-136 using a high pressure xenon gas TPC with electroluminescent (EL) amplification. The NEXT-White (NEW) detector, with an active xenon mass of about 10 kg at 15 bar, is the first NEXT prototype installed at LSC. It implements the NEXT detector concept tested in smaller prototypes using the same radiopure sensors and materials that will be used in the future NEXT-100, serving as a benchmark for technical solutions as well as for the signal selection and background rejection algorithms. NEW is currently under commissioning at the LSC. In this poster proceedings we describe the technical solutions adopted for NEW construction, the lessons learned from the commissioning phase, and the first results on energy calibration and energy resolution obtained with low-energy radioactive source data.

  7. Selectively strippable paint schemes

    Science.gov (United States)

    Stein, R.; Thumm, D.; Blackford, Roger W.

    1993-03-01

    In order to meet the requirements of more environmentally acceptable paint stripping processes many different removal methods are under evaluation. These new processes can be divided into mechanical and chemical methods. ICI has developed a paint scheme with intermediate coat and fluid resistant polyurethane topcoat which can be stripped chemically in a short period of time with methylene chloride free and phenol free paint strippers.

  8. 75 FR 13489 - Natural Bristle Paint Brushes and Brush Heads from the People's Republic of China: Final Results...

    Science.gov (United States)

    2010-03-22

    ... Brushes and Brush Heads from the People's Republic of China: Final Results of the Expedited Sunset Review... from the People's Republic of China (``PRC'') pursuant to section 751(c) of the Tariff Act of 1930, as amended (``the Act''). See Initiation of Five-year (``Sunset'') Review, 74 FR 56593 (November 2, 2009...

  9. Preference for and discrimination of paintings by mice.

    Directory of Open Access Journals (Sweden)

    Shigeru Watanabe

    Full Text Available I measured preference for paintings (Renoir vs. Picasso or Kandinsky vs. Mondrian in mice. In general mice did not display a painting preference except for two mice: one preferred Renoir to Picasso, and the other preferred Kandinsky to Mondrian. Thereafter, I examined discrimination of paintings with new mice. When exposure to paintings of one artist was associated with an injection of morphine (3.0 mg/kg, mice displayed conditioned preference for those paintings, showing discrimination of paintings by Renoir from those by Picasso, and paintings by Kandinsky from those by Mondrian after the conditioning. They also exhibited generalization of the preference to novel paintings of the artists. After conditioning with morphine for a set of paintings consisting of two artists, mice showed discrimination between two sets of paintings also from the two artists but not in association with morphine. These results suggest that mice can discriminate not only between an artist's style but also among paintings of the same artist. When mice were trained to discriminate a pair of paintings by Kandinsky and Renoir in an operant chamber equipped with a touch screen, they showed transfer of the discrimination to new pairs of the artists, but did not show transfer of discrimination of paintings by other artists, suggesting generalization.

  10. Color alteration of the paint used for iris painting in ocular prostheses

    Directory of Open Access Journals (Sweden)

    Aline Úrsula Rocha Fernandes

    2009-12-01

    Full Text Available The purpose of this study was to assess color alteration of the paints used for iris painting in artificial eyes. Five disks of heat cured acrylic resin were confectioned by microwave energy for each paint analyzed, in a total of 40 specimens. Each specimen consisted of a colorless acrylic resin disk and another of equal size, of scleral white colored acrylic resin, with the painting interposed between the two disks. The specimens were submitted to an accelerated aging process in a chamber under ultraviolet radiation for 1,008 hours. To assess color variation, a reflective spectrophotometer was used. The results were statistically analyzed by ANOVA and the Tukey test (p < 0.05. All the paints underwent chromatic alteration. The oil paint presented the highest resistance to accelerated aging.

  11. Elemental composition of paint cross sections by nuclear microprobe analysis

    International Nuclear Information System (INIS)

    Nens, B.; Trocellier, P.; Engelmann, C.; Lahanier, C.

    1982-09-01

    Physico-chemical characterization of pigments used in artistic painting give precious indications on age of paintings and sometimes on geographical origin of ores. After recalling the principle of protons microprobe, first results obtained by microanalysis of painting cross sections for non destructive microanalysis of impurities in white lead are given [fr

  12. TeraHertz imaging of hidden paint layers on canvas

    NARCIS (Netherlands)

    Adam, A.J.L.; Planken, P.C.M.; Meloni, S.; Dik, J.

    2009-01-01

    We show terahertz reflection images of hidden paint layers in a painting on canvas and compare the results with X-ray Radiography and Infrared Reflectography. Our terahertz measurements show strong reflections from both the canvas/paint interface and from the raw umber/lead white interface,

  13. Oil-based paint poisoning

    Science.gov (United States)

    Paint - oil-based - poisoning ... Hydrocarbons are the primary poisonous ingredient in oil paints. Some oil paints have heavy metals such as lead, mercury, cobalt, and barium added as pigment. These heavy metals can cause additional ...

  14. Painting for protection

    International Nuclear Information System (INIS)

    Stepto, G.G.C.

    1981-01-01

    Despite the use of special alloys, paint is still the most economical and practical method of protecting steel. Chlorinated rubber resin based paint systems are shown to be satisfactory in areas requiring decontamination as well as for outside exposed areas of nuclear power plants. (author)

  15. Chromosome painting in plants.

    NARCIS (Netherlands)

    Schubert, I.; Fransz, P.F.; Fuchs, J.; Jong, de J.H.

    2001-01-01

    The current 'state-of-art' as to chromosome painting in plants is reviewed. We define different situations described as painting so far: i) Genomic in situ hybridisation (GISH) with total genomic DNA to distinguish alien chromosomes on the basis of divergent dispersed repeats, ii) 'Chromosomal in

  16. PAINT SUPPLIES AND LOCATION: EXAMINING ICI

    Directory of Open Access Journals (Sweden)

    M. Herron

    2016-01-01

    Full Text Available How important is location to an international retailer? Not just any retailer but the second largest paint retailer in the world. Imperial Chemical Industries (ICI was a British chemical company and was at one stage the largest manufacturer in Britain. Formed from the merger of several leading British chemical companies in 1926, ICI makes paints and speciality products, including food ingredients, speciality polymers, electronic materials, fragrances and flavourings. ICI paints purchased the Cleveland Ohiobased Glidden Coatings & Resins (Glidden Paint Company in 1986 for USD$580 million. The addition of Glidden to ICI's North American operations more than doubled that subsidiary's annual sales to $3 billion and increased ICI's corporate presence in the United States dramatically. A decline in paint and solvent consumption during the 2000 decade slowed the average growth of the paint industry to about 2% annually. Rauch Associates, the leading US paint analyst firm, predicted near-term growth to slow even further to 1.2% per annum. Through the 1990’s and early 2000’s Glidden paint was sold only through Glidden-badged paint stores and smaller retailers under licence, developing a strong identifiable brand and reputation. How were potential Glidden retail paint store locations chosen across America to enable and support this market growth? This paper investigates the real process that was developed and applied to construct a national network of retail outlets across the United States. It also highlights the change in direction that occurred at ICI paints culminating in its eventual acquisition by AkzoNobel in 2008 who immediately sold parts of ICI to Henkel, and integrated ICI's remaining operations within its existing organisation. This sale and the associated corporate restructure caused considerable change in marketing directions allowing for the first time the selling of Glidden paint products to mass market centres

  17. Fiscal 1997 report on the results of the international standardization R and D. Quantification of the sensory evaluation and international standardization in the paint field; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Toryo bun`ya ni okeru kanno hyoka no teiryoka to kokusai hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Japanese paint users demand products of higher-quality than users in the U.S. and Europe, and therefore, paint makeres in Japan are making strenuous efforts to improve the product quality in terms of homogeneity, appearence and durability of the surface of paint films. However, the evaluation of paint surfaces is conducted by the qualitative sensory evaluation, resulting in obtaining no appropriate evaluation. Accordingly, the following were developed as new evaluation methods which give rational and economical indicators, contribute to shortening of the period for development of new products, and aim at the international standardization: 1) quantitative evaluation of the paint drying process; 2) image analysis of the degraded part of paint films; 3) surface analysis of paint films. In 1), a kinetic friction measuring quantitative evaluation of the surface of paint films was developed. In 2), the development of an exclusive program by the image analysis made the quantitative evaluation with high accuracy/reliability possible. In 3), an evaluation method was developed in which differences among the specimens can be detected by the chemiluminescent measurement in an extremely early stage of exposure when the gloss change just begins. As to the chalking, a new evaluation was developed in which the degree of chalking can quantitatively be evaluated by attaching a special adhesion tape to the degraded part of paint films and by the optical measurement of the degree of transparency. 101 refs., 341 figs., 118 tabs.

  18. Construction of a WMR for Trajectory Tracking Control: Experimental Results

    Directory of Open Access Journals (Sweden)

    R. Silva-Ortigoza

    2013-01-01

    Full Text Available This paper reports a solution for trajectory tracking control of a differential drive wheeled mobile robot (WMR based on a hierarchical approach. The general design and construction of the WMR are described. The hierarchical controller proposed has two components: a high-level control and a low-level control. The high-level control law is based on an input-output linearization scheme for the robot kinematic model, which provides the desired angular velocity profiles that the WMR has to track in order to achieve the desired position (x*,y* and orientation (φ*. Then, a low-level control law, based on a proportional integral (PI approach, is designed to control the velocity of the WMR wheels to ensure those tracking features. Regarding the trajectories, this paper provides the solution or the following cases: (1 time-varying parametric trajectories such as straight lines and parabolas and (2 smooth curves fitted by cubic splines which are generated by the desired data points x1*,y1*,…,xn*,yn*. A straightforward algorithm is developed for constructing the cubic splines. Finally, this paper includes an experimental validation of the proposed technique by employing a DS1104 dSPACE electronic board along with MATLAB/Simulink software.

  19. Nanoparticles Ni electroplating and black paint for solar collector applications

    Directory of Open Access Journals (Sweden)

    J. El Nady

    2016-06-01

    Full Text Available A nanoparticles layer of bright nickel base was deposited on copper substrates using electrodeposition technique before spraying the paint. IR reflectance of the paint was found to be around 0.4 without bright nickel layer and the reflectance increased to 0.6 at a Ni layer thickness of 750 nm. The efficiency of the constructed solar collectors using black paint and black paint combined with bright nickel was found to be better than black paint individually. After aging tests under high temperature, Bright nickel improved the stability of the absorber paint. The collector optical gain FR(τα was lowered by 24.7% for the commercial paint and lowered by 19.3% for the commercial paint combined with bright nickel. The overall heat loss FR(UL was increased by 3.3% for the commercial paint and increased by 2.7% for the commercial paint combined with bright nickel after the temperature aging test.

  20. Denotative and connotative meanings of paintings

    Directory of Open Access Journals (Sweden)

    Vasić Sandra

    2007-01-01

    Full Text Available In this study the relationships between judgments of paintings denotative and connotative meanings was investigated. Denotative domain was defined as motif (represented object, e.g. portrait, landscape etc. and message (information carried by paintings, e.g. celebration of patriotism. Connotative domain was defined as subjective experience, i.e. affective or metaphoric impression produced by painting (e.g. feeling of pleasure, impression of dynamics, and so on. In preliminary study the list of 39 motifs was specified empirically. The four dimensions of pictorial message were taken from the previous study (Marković, 2006: Subjectivism, Ideology, Decoration and Constructivism vs. Realism. The four dimensions of paintings subjective experience were taken from the previous study as well (Radonjić and Marković, 2005: Regularity, Attraction, Arousal and Relaxation. In Experiment 1 subjects were asked to associate 39 motifs with 18 paintings. In Experiment 2 subjects were asked to judge 24 paintings on four dimensions of pictorial message. Results form Experiment 1 have shown that dimensions of paintings subjective experience were significantly correlated with only five motifs (e.g. everyday life was negatively correlated with Arousal, battle was negatively correlated with Relaxation, and so on. Results from Experiment 2 have shown that Subjectivism and Constructivism are negatively correlated with Regularity, and positively correlated with Arousal. Decoration is negatively correlated with Arousal and positively with Attraction and Relaxation.

  1. Paintings discrimination by mice: Different strategies for different paintings.

    Science.gov (United States)

    Watanabe, Shigeru

    2017-09-01

    C57BL/6 mice were trained on simultaneous discrimination of paintings with multiple exemplars, using an operant chamber with a touch screen. The number of exemplars was successively increased up to six. Those mice trained in Kandinsky/Mondrian discrimination showed improved learning and generalization, whereas those trained in Picasso/Renoir discrimination showed no improvements in learning or generalization. These results suggest category-like discrimination in the Kandinsky/Mondrian task, but item-to-item discrimination in the Picasso/Renoir task. Mice maintained their discriminative behavior in a pixelization test with various paintings; however, mice in the Picasso/Renoir task showed poor performance in a test that employed scrambling processing. These results do not indicate that discrimination strategy for any Kandinsky/Mondrian combinations differed from that for any Picasso/Monet combinations but suggest the mice employed different strategies of discrimination tasks depending upon stimuli. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Paint and Pregnancy

    Science.gov (United States)

    ... of paints used for industry, the arts, and hobbies. Years ago, lead and mercury were used in ... high amounts of toluene – higher exposure than a hobby or professional painter would likely have. I work ...

  3. A portable X-ray diffraction apparatus for in situ analyses of masters' paintings

    International Nuclear Information System (INIS)

    Eveno, Myriam; Duran, Adrian; Castaing, Jacques

    2010-01-01

    It is rare that the analyses of materials in paintings can be carried out by taking micro-samples. Valuable works of art are best studied in situ by non-invasive techniques. For that purpose, a portable X-ray diffraction and fluorescence apparatus has been designed and constructed at the C2RMF. This apparatus has been used for paintings of Rembrandt, Leonardo da Vinci, Van Gogh, Mantegna, etc. Results are given to illustrate the performance of X-ray diffraction, especially when X-ray fluorescence does not bring sufficient information to conclude. (orig.)

  4. A portable X-ray diffraction apparatus for in situ analyses of masters' paintings

    Science.gov (United States)

    Eveno, Myriam; Duran, Adrian; Castaing, Jacques

    2010-09-01

    It is rare that the analyses of materials in paintings can be carried out by taking micro-samples. Valuable works of art are best studied in situ by non-invasive techniques. For that purpose, a portable X-ray diffraction and fluorescence apparatus has been designed and constructed at the C2RMF. This apparatus has been used for paintings of Rembrandt, Leonardo da Vinci, Van Gogh, Mantegna, etc. Results are given to illustrate the performance of X-ray diffraction, especially when X-ray fluorescence does not bring sufficient information to conclude.

  5. Construction and early commissioning results of the AGS Booster

    International Nuclear Information System (INIS)

    Weng, W.T.; Ahrens, L.; Damm, R.; McNerney, A.J.

    1991-01-01

    The AGS Booster synchrotron has been designed to accelerate protons from 200 MeV to 1.5 GeV and heavy ions from several MeV per nucleon to several hundred MeV per nucleon for all the nuclei up to gold. The design requirements and measurements results of major accelerator components and systems are presented. The early commissioning results of the injection is also presented. 12 refs., 9 figs., 2 tabs

  6. Construction details and test results from RHIC sextupoles

    International Nuclear Information System (INIS)

    Lindner, M.; Anerella, M.; Ganetis, G.

    1993-01-01

    Four 8 cm aperture sextupoles have been built at BNL to verify the magnetic performance of this magnet in the RHIC installation. Two significantly different mechanical configurations have been designed, and two magnets of each design have been built, and successfully tested, and have exceeded the required minimum quench current by a substantial margin. This report describes the assembly details of the second configuration, which is the final production configuration. In addition the first industry built production sextupole has been delivered and tested. This report presents the results of quench tests on all 5 magnets and field measurements on the first production sextupole

  7. Electrochemical assessment of magnetite anti corrosive paints

    International Nuclear Information System (INIS)

    Escobar, D. M.; Arroyave, C.; Jaramillo, F.; Mattos, O. R.; Margarit, I. c.; Calderon, J.

    2003-01-01

    With the purpose of deepening in the understanding of the mechanisms of protection of anticorrosive pigments based on iron oxides, this work has been carried out on the production of pure magnetite, and copper and chromium doped magnetite, which were evaluated by different characterization techniques. The paints were prepared with a solvent less epoxy resin maintaining the Pigment volume Content near the Practical Critical value (CPVC), established for each pigment. The paints were applied on polished steel and monitored with electrochemical techniques at total immersion conditions. Permeability and impedance measurements of free films were also done. Impedance data were simulated with the Boukamp software. Results show that the paints pigmented with doped magnetite present better behaviour than a paint prepared with commercial hematite. (Author) 8 refs

  8. Analysis gives alterations stable chromosomic induced by the radiation in vitro the sanguine samples to well-known dose. Preliminary results obtained by means of chromosomic painting

    International Nuclear Information System (INIS)

    Prieto, M.J.; Moreno, M.; Gomez-Espi, M.; Olivares, P.; Herranz, R.

    1998-01-01

    In the University General Hospital Gregorio Marannon, once standardized the technique in situ hybridization with fluorescence by means of painting chromosomic the couples 1 and 2 you this carrying out the irradiation gives sanguine samples to well-known dose The objective these irradiations it is the elaboration in vitro a calibration chart dose effect for gamma ray. This new curve will allow to estimate dose in individuals with suspicion overexposure to ionizing radiations, solving some gives the limitations that it presents the technique classic cytogenetics

  9. NON-INVASIVE SURVEY OF OLD PAINTINGS USING VNIR HYPERSPECTRAL SENSOR

    Directory of Open Access Journals (Sweden)

    E. Matouskova

    2013-07-01

    Full Text Available Hyperspectral imaging is relatively new method developed primarily for army applications with respect to detection of possible chemical weapon existence and as an efficient assistant for a geological survey. The method is based on recording spectral profile for many hundreds of narrow spectral band. The technique gives full spectral curve of explored pixel which is an unparalleled signature of pixels material. Spectral signatures can then be compared with pre-defined spectral libraries or they can be created with respect to application. A new project named "New Modern Methods of Non-invasive Survey of Historical Site Objects" started at CTU in Prague with the New Year. The project is designed for 4 years and is funded by the Ministry of Culture in the Czech Republic. It is focused on material and chemical composition, damage diagnostics, condition description of paintings, images, construction components and whole structure object analysis in cultural heritage domain. This paper shows first results of the project on painting documentation field as well as used instrument. Hyperspec VNIR by Headwall Photonics was used for this analysis. It operates in the spectral range between 400 and 1000 nm. Comparison with infrared photography is discussed. The goal of this contribution is a non-destructive deep exploration of specific paintings. Two original 17th century paintings by Flemish authors Thomas van Apshoven ("On the Road" and David Teniers the Younger ("The Interior of a Mill" were chosen for the first analysis with a kind permission of academic painter Mr. M. Martan. Both paintings oil painted on wooden panel. This combination was chosen because of the possibility of underdrawing visualization which is supposed to be the most uncomplicated painting combination for this type of analysis.

  10. Landscape Painting. Rewriting Painting in the Postmedium Condition

    Directory of Open Access Journals (Sweden)

    Gal, Nissim

    2011-02-01

    Full Text Available Is landscape painting still relevant today? To answer this question the article examines the work of the contemporary artist Yehudit Sasportas. Sasporas offers a unique kind of written-drawn landscape painting that moves between the manual and the mechanical. The theoretical perspectives from which it is approached are taken, among others, from Plato, Heidegger and Derrida on the issue of writing. Sasportas painting, which may be characterized as "painting under erasure" or "Landscape Painting", serves as a key to understanding the status of painting as a relevant medium, not because it defines medium according to the modernist Greenbergian formula, but because it enables an understanding of painting as a field that exists in a variety of media. Painting as a field, in Sasportas's art, works and lives within various techniques and materials, even when it includes within itself a melancholic mark indicating doubt about its own relevance.

  11. Imagined memories of painting

    OpenAIRE

    Horta, Maia Schmidt, 1974-

    2011-01-01

    Tese de mestrado, Pintura, Universidade de Lisboa, Faculdade de Belas Artes, 2011 A Tese é compsota por dois volumes, um em portugês, outro em inglês Visual imagery, narratives and locations have always been linked to the study of memory. Memory has always been linked to art history and historical shifts in the study of memory had a direct impact on the history of painting. Painting was based on stories and served to make those stories memorable. Since then there have been numerous inve...

  12. Introductory guide to painting

    CSIR Research Space (South Africa)

    Cromarty, R.E

    1985-01-01

    Full Text Available , and have doubts about it, you are wel- come to contact the NBRl for advice. It is always best when buying a paint system to select the products of a single manufacturer. the grain as it dries. Several coats can be used to give a high-gloss finish... rendering Those who have lived on a farm will probably remember how surplus fat used to be treated with an alkali to make soap. The same thing can happen at the point where some oil paints come in contact with the wall. The alkali, which is always...

  13. Process Waste Assessment - Paint Shop

    International Nuclear Information System (INIS)

    Phillips, N.M.

    1993-06-01

    This Process Waste Assessment was conducted to evaluate hazardous wastes generated in the Paint Shop, Building 913, Room 130. Special attention is given to waste streams generated by the spray painting process because it requires a number of steps for preparing, priming, and painting an object. Also, the spray paint booth covers the largest area in R-130. The largest and most costly waste stream to dispose of is open-quote Paint Shop wasteclose quotes -- a combination of paint cans, rags, sticks, filters, and paper containers. These items are compacted in 55-gallon drums and disposed of as solid hazardous waste. Recommendations are made for minimizing waste in the Paint Shop. Paint Shop personnel are very aware of the need to minimize hazardous wastes and are continuously looking for opportunities to do so

  14. LSST Painting Risk Evaluation Memo

    Energy Technology Data Exchange (ETDEWEB)

    Wolfe, Justin E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-11-10

    The optics subsystem is required to paint the edges of optics black where possible. Due to the risks in applying the paint LSST requests a review of the impact of removing this requirement for the filters and L3.

  15. Intumescent coatings with improved properties for high-rise construction

    Science.gov (United States)

    Ustinov, Andrey; Zybina, Olga; Tanklevsky, Leonid; Lebedev, Vasily; Andreev, Andrey

    2018-03-01

    The paper overviews the way of creating intumescent fire-protective compositions with improved properties by adding nano-and micro-sized supplements into them. Intumescent paints are inert at low temperatures, and at higher temperatures they expand and degrade to provide a charred layer of low conductivity materials. The modified intumescent paints are able to form a more stable charred layer than the classical paints. The stability of a charred layer is crucial if the fire safety in high-rise construction must be secured, because a weak charred layer will not provide a required fire endurance for steel bearing structures and they will break down in case of fire. The fire-protective properties of modified intumescent paints were estimated using an electrical furnace. Also the way of thermal decomposition of the paints was studied with thermogravimetric analysis. Results show that modified intumescent paints form a charred layer with improved fire-protective properties; it can serve as a thermal barrier for a longer period of time. Thermogravimetric analysis confirms this fact showing that the temperatures of full thermal decay in case of modified paints are higher than those of non-modified paints.

  16. Cultural Collage Paintings

    Science.gov (United States)

    Coy, Mary

    2011-01-01

    In this article, the author describes a cultural collage painting project. Three things served as the impetus for this project: (1) a desire for students to explore the theme of "culture"; (2) an appreciation for the photo-montaged, layered images one sees in print media; and (3) noticing that projects from core subject areas hanging on the walls…

  17. Synergism in anticorrosive paints

    Indian Academy of Sciences (India)

    1CIDEPINT (CONICET–CICPBA): Centro de Investigación y Desarrollo en Tecnología de Pinturas,. Calle 52e/121 y 122, .... plus SOFTCORR 352 software. 2.2 Experimental paints ..... tigaciones Científicas y Técnicas), CICPBA (Comisión de.

  18. Painting Reproductions on Display

    Directory of Open Access Journals (Sweden)

    Joanna Iranowska

    2017-09-01

    Full Text Available Paintings in museums might occasionally be replaced by a photoprint mimicking the original. This article is an investigation of what constitutes a good reproduction of an artwork (oil painting that is meant to be displayed. The article discusses what the usefulness of reproductions depends on, applying the Valuation Studies approach, which means the primary concern is with the practice of valuing itself. In other words, the study focuses on how museum experts evaluate reproduc-tions of oil paintings. The article analyses three cases of displaying digitally prin-ted copies of Edvard Munch's oil paintings between 2013 and 2015 in the Munch Museum and in the National Gallery in Oslo. The study is based on a series of semi-structured interviews with the experts, working at and for the museums, that were involved in producing and exhibiting of the photoprints: curators, con-servators, museum educators, and external manufacturers. The interviews were grouped into five clusters, which I have chosen to call registers of valuing following Frank Heuts and Annemarie Mol (2013. The described valuation practices have to do with delivering experiences to the public, obtaining mimetic resemblance, solving ethical aspects, exhibitions' budget, and last but not least, with the time perspective.

  19. Painting and Writing Matters

    DEFF Research Database (Denmark)

    Balle, Søren Hattesen

    materialization. At the same time as O’Hara and Rivers investigate the often conflicting powers of both genres to incarnate the reality of the material world (especially the human body) in their respective media, they also playfully foreground the materiality of painterly/poetic text as paint and writing...

  20. Lined canvas paintings

    DEFF Research Database (Denmark)

    Krarup Andersen, Cecil

    2013-01-01

    at 50% RH but increased the stress level severely in dry conditions and offered no support to the painting at 70-80 % RH. This means that the traditional glue-paste lining techniques and the wax-resin technique in high RH seem to limit the advisable RH fluctuation in a cultural institution. Conversely...

  1. Painting Patterns with Pixels.

    Science.gov (United States)

    Yoerg, Kim

    2002-01-01

    Describes an art unit for middle school students where they created their own original pattern through the use of "ClarisWorks Paint." Discusses the procedure for the project and the evaluation used at the end of the unit. Emphasizes the importance of learning about computers. (CMK)

  2. Accelerated bridge paint test program.

    Science.gov (United States)

    2011-07-06

    The accelerated bridge paint (AB-Paint) program evaluated a new Sherwin-Williams two-coat, : fast-curing paint system. The system is comprised of an organic zinc-rich primer (SW Corothane I : Galvapac One-Pack Zinc-Rich Primer B65 G11) and a polyurea...

  3. Preventive conservation applied to "Casa dos Patudos" oil painting collection

    Directory of Open Access Journals (Sweden)

    Mafalda Fernandes

    2016-01-01

    Full Text Available The main objective of this work was the identification of specific risks affecting the collection of oil paintings in the historic house "Casa dos Patudos" (Alpiarça, Portugal and the development of mitigation strategies for the risks encountered. The methodology used was proposed by the Canadian Conservation Institute. The results showed that the main risks affecting this collection result from incorrect handling, increase in paint detachment due to the maintenance of paintings with paint lifting on display, occurrence of insect pests, high fluctuations in relative humidity and, excessive exposure to ultraviolet radiation. Several preventive conservation strategies to mitigate these risks are proposed.

  4. Study of decontamination and radiation resistance properties of Indian paints

    International Nuclear Information System (INIS)

    Shah, S.M.; Gopinathan, E.; Bhagwath, A.M.

    1976-01-01

    A brief introduction to the study of contamination and radiation resistance properties of Indian paints used as coating for structural materials in the nuclear industry is given. The general composition of paints such as epoxy, vinyl, alkyd, phenolic, chlesimated rubber, etc. is given. Method of sample preparation, processing and actual evaluation of decontaminability are described. The results have been discussed in terms of decontamination factors. Some recommendations based on the performance of the paints studied are also included. (K.B.)

  5. Test Production of Anti-Corrosive Paint in Laboratory Scale

    International Nuclear Information System (INIS)

    Thein Thein Win, Daw; Khin Aye Tint, Daw; Wai Min Than, Daw

    2003-02-01

    The main purpose of this project is to produce the anti-corrosive paint in laboratory scale. In these experiments, local raw materials, natural resin (shellac), pine oil, turpentine and ethyl alcohol wer applied basically. Laboratory trials were undrtaken to determine the suitablity of raw materials ane their composition for anti-corrosive paint manufacture.The results obtained show that the anti-corrosive paint from experiment No.(30) is suitable for steel plate and this is also considered commercially economics

  6. Paintings - high-energy protons detect pigments and paint-layers

    International Nuclear Information System (INIS)

    Denker, A.; Opitz-Coutureau, J.

    2004-01-01

    High-energy PIXE was used to identify pigment composition, sequencing and the thickness of paint-layers. Before applying the technique to valuable masterpieces, mock-ups were examined in a collaboration with the Kunsthistorisches Museum, Vienna. The results of high-energy PIXE were compared to conventional cross-section analysis. In addition, the non-destructiveness of the technique was investigated thoroughly. After this preparative work, two ancient paintings have been examined and the results are presented in this paper

  7. Self Cleaning Paint: Introduction of Photocatalytic Particles into a Paint System

    DEFF Research Database (Denmark)

    Gunnarsson, Sverrir Grimur

    The current industrial PhD work was aimed at synthesising a photocatalytic composite material which could be used to give organic wood paint films self-cleaning and anti-microbial properties. The current PhD work was done in collaboration between Dyrup A/S and Technical University of Denmark...... consists of an introduction to relevant concepts and literature followed by results, presented as research papers, and a patent application. Four research papers are introduced as individual chapters. Chapter 4 discusses the synthesis and optimisation of anatase TiO2 coated microspheres, chapter 5......-cleaning coatings containing TiO2 coated microspheres. The results show that introducing a photocatalyst into an organic paint system as a coating on inert carrier particles results in durable and weather stable paint films. The paint films exhibit selfcleaning properties and are able to resist the attack of micro...

  8. Conservation problems with paintings containing fluorescent layers of paint

    Directory of Open Access Journals (Sweden)

    Stefanie De Winter

    2010-11-01

    there is a big esthetical problem. The retouched damage is visible under UV-light. The title of this thesis is born out of this last problem: Conservation problems with paintings containing fluorescent layers of paint. The first topic of research for this thesis concerns the composition of these different sorts of paint and pigments. Afterwards, the causes of damage resulting from UV-light –and other factors- were thoroughly analyzed. Finally, a possible remedy is being proposed.

  9. Painting with polygons: a procedural watercolor engine.

    Science.gov (United States)

    DiVerdi, Stephen; Krishnaswamy, Aravind; Měch, Radomír; Ito, Daichi

    2013-05-01

    Existing natural media painting simulations have produced high-quality results, but have required powerful compute hardware and have been limited to screen resolutions. Digital artists would like to be able to use watercolor-like painting tools, but at print resolutions and on lower end hardware such as laptops or even slates. We present a procedural algorithm for generating watercolor-like dynamic paint behaviors in a lightweight manner. Our goal is not to exactly duplicate watercolor painting, but to create a range of dynamic behaviors that allow users to achieve a similar style of process and result, while at the same time having a unique character of its own. Our stroke representation is vector based, allowing for rendering at arbitrary resolutions, and our procedural pigment advection algorithm is fast enough to support painting on slate devices. We demonstrate our technique in a commercially available slate application used by professional artists. Finally, we present a detailed analysis of the different vector-rendering technologies available.

  10. Identification of the chemical inventory of different paint types applied in nuclear facilities

    International Nuclear Information System (INIS)

    Sabrina Tietze; Foreman, M.R.St.J.; Ekberg, CH.H.; Chalmers University of Technology, Chemical and Biological Engineering, Goeteborg; Dongen van, B.E.

    2013-01-01

    The floors, concrete walls and many of the metal surfaces in nuclear power plant containments are coated with zinc primers or paint films to preserve the metal surfaces and simplify decontamination in the containment after the occurrence of a severe nuclear incident or accident. A chemical examination of paint films from different nuclear installations out of operation, as well as current operating ones, reveals that different types of paints are used whose composition can vary significantly. Results obtained for one type of paint at a certain nuclear site are in most cases unlikely to be comparable with sites painted with another type of paint. During normal operation and particularly during nuclear accidents, the paints will degrade under the high temperature, steam and irradiation influence. As paint and its degradation products can act as sources and depots for volatile iodine compounds, the type and aging conditions of the paint films will have a significant impact on the source term of the volatile fission product iodine. Thus, great care should be taken when extrapolating any results obtained for the interaction of radioactive iodine with one paint product to a different paint product. The main focus of the study is a comparison of the chemical profile of paint films applied in Swedish nuclear power plants. Teknopox Aqua V A, an epoxy paint recently used at Ringhals 2, and an emulsion paint used in the scrubber buildings of Ringhals 1-4 are compared with a paint film from Barsebaeck nuclear power plant unit 1 that had been aged under real reactor conditions for 20 years. In addition, two paint films, an emulsion and a gloss paint, used in an international nuclear fuel reprocessing facility, are compared with the paints from the Swedish nuclear power plants. (author)

  11. Oils, paintings and chemistry

    Directory of Open Access Journals (Sweden)

    Maria Eduarda Machado de Araújo

    2005-01-01

    Full Text Available In oil paintings artists use oils to apply pigments. These oils firstly are liquid and then solidify in a thin film. Many chemical reactions are involved in drying and also in the aging of these oils. Drying is a continuous process that begins with the oxidation of insaturated fatty acids from triglycerides to originate peroxides. These compounds suffer a cascade of reactions that lead to cross linking bonds between fatty acids residues, transforming the oil in a solid film. Identification of the film oil is possible using the palmitic/stearic ratio (P/S by chromatographic (GC and/or spectroscopic techniques. Sterol composition, phytosterols or cholesterol, determined by GC-MS or FTIR techniques, allows investigators to distinguish between oil painting and a temper one that used egg as the binding medium.

  12. Retrospective dosimetry using chromosome painting

    International Nuclear Information System (INIS)

    Nasazzi, N.B.; Giorgio, M.D.; Taja, M.R.

    2000-01-01

    have performed our own dose response relationship, based on the frequency of stable chromosome aberrations detected by Chromosome Painting for Co 60 γ-rays, with doses ranging from 0 Gy to 3 Gy delivered at a 0.4 Gy/min dose rate and painting chromosomes 1, 2 and 4, which represent 22% of the genome. We have scored reciprocal and non-reciprocal translocations, excess of painted acentrics, insertions, dicentrics and centric rings. After extrapolating the obtained frequencies to the full genome, the corresponding data set agree well with our previous results of dicentrics and centric rings and reciprocal and non reciprocal translocations, obtained using the same in vitro irradiation protocol. In order to collect information about the stability and the cumulative behavior of stable chromosome aberrations, we have retrospectively evaluated, using the Chromosome Painting calibration curve, a nuclear power plant worker sample with doses ranging from 500 mSv to 800 mSv. As a whole, the observed frequencies do not differ significantly from the expected frequencies obtained applying the calibration curve α coefficient. Some workers of this samples were previously evaluated using G-banding in 1995 and the present results agree well with the expected frequencies due to the accumulated during the last four years. (author)

  13. Impact on the environment from steel bridge paint deterioration using lead isotopic tracing, paint compositions and soil deconstruction

    Energy Technology Data Exchange (ETDEWEB)

    Gulson, Brian, E-mail: brian.gulson@mq.edu.au [Department of Environmental Science, Macquarie University, Sydney, NSW 2109 (Australia); CSIRO Energy Flagship, North Ryde, NSW 2113 (Australia); Chiaradia, Massimo [Department of Mineralogy, University of Geneva, Geneva (Switzerland); Davis, Jeffrey [CSIRO Energy Flagship, North Ryde, NSW 2113 (Australia); O' Connor, Gary [Queensland Department of Environment & Heritage Protection, Brisbane, QLD 4000 (Australia)

    2016-04-15

    Deterioration and repair of lead paint on steel structures can result in contamination of the ambient environment but other sources of lead such as from past use of leaded paint and gasoline and industrial activities can also contribute to the contamination. Using a combination of high precision lead isotopic tracing, detailed paint examination, including with scanning electron microscopy, and soil deconstruction we have compared paint on a steel bridge and bulk soil and lead-rich particles separated from soil. The majority of Pb found in the paint derives from Australian sources but some also has a probable US origin. The isotopic data for the bulk soils and selected particles lie on a mixing line with end members the geologically ancient Broken Hill lead and possible European lead which is suggested to be derived from old lead paint and industrial activities. Data for gasoline-derived particulates lie on this array and probably contribute to soil Pb. Although paint from the bridge can be a source of lead in the soils, isotopic tracing, paint morphology and mineralogical identification indicate that other sources, including from paint, gasoline and industrial activities, are contributing factors to the lead burden. Even though physical characteristics and elemental composition are the same in some particles, the isotopic signatures demonstrate that the sources are different. Plots using {sup 206}Pb/{sup 208}Pb vs {sup 206}Pb/{sup 207}Pb ratios, the common representation these days, do not allow for source discrimination in this investigation. - Highlights: • Soil Pb values up to 1200 mg/kg below Pb painted bridge • Microscopy & SEM characterised up to 6 different paint layers. • Isotopes identified different sources of Pb including paint and gasoline. • Multiple methods provide definitive answers.

  14. British Museum paintings

    OpenAIRE

    Edmonds, Frances

    2011-01-01

    Frances Edmonds is one of a group of artists selected for the show ‘Territories’ taking place at Galerie Windkracht 13 in Den Helder, Holland this July 2012. This exhibition is curated by Sharon Beavan and Gethin Evans. The artists represented work across the boundaries of two and three-dimensional and time based form. The brief – to interrogate and explore the notion of territories. Frances will be showing several paintings from the British Museum series, based on imagery collected ...

  15. Chromatic changes on the wall paintings in Sanderum Church (Denmark)

    DEFF Research Database (Denmark)

    Brajer, Isabelle Eve; Christensen, Mads Christian

    2011-01-01

    This paper describes observations and results of analyses undertaken to find explanations for several phenomena affecting the colours on the Gothic wall paintings in Sanderum Church (Denmark). Paintings have been exposed on four webs of the chancel vault and one web in the nave since 1882. Three ...

  16. Dynamics of Anthropomorphic Painting Robot: Quality Analysis and Cost Reduction

    NARCIS (Netherlands)

    Potkonjak, V.; Djordjevic, G.; Kostic, D.; Rasic, M.

    2000-01-01

    Application of robots in spray-painting tasks results in low-cost production, persistent quality and protects humans from a hostile working environment. Automated planning of applicator’s trajectory requires a model of paint deposition onto the treated surface and formulation of an appropriate

  17. Structuralist readings: Painting vs. picture

    Directory of Open Access Journals (Sweden)

    Marinkov-Pavlović Lidija

    2016-01-01

    Full Text Available The aim of the paper is to point to two fundamentally different strategies of painting practice, that is, to two subsystems of painting: picture and painting. This differentiation can be made within the framework of semiotic and semiological analyses which have developed in theory under the influence of structuralism. The first part of the paper offers a basic insight into the linguistic foundation of structuralistic concept, and then sets a thesis about the possibility of analogue reconceptualisation of semiotics/semiology of painting through Julia Kristeva's semiotics and Roland Barthes' semiology. In addition, it points to the concrete concepts of structural analysis which have accentuated the opposition picture-painting with the examples of art practice concurrent to the development of structuralism. However, what is revealed is that various structuralist readings are significantly subjective to unstable relationship between the basic elements in the pictorial object, that is, in the work of painting.

  18. The art in science: electron microscopy and paintings conservation

    International Nuclear Information System (INIS)

    Waters, L.

    2003-01-01

    Full text: When examining a painting, a conservator uses many different and complementary methods of analysis to build an understanding of the materials and way the painting was constructed. Common methods of examination include x-radiography, infrared reflectography, ultraviolet fluorescence and optical microscopy of the surface of the painting. Minute samples of paint prepared as cross-sections are sometimes taken for optical examination under the microscope, and it is these that can, conveniently, be further analysed with electron microscopy to yield another level of information. Electron microscopy has a valuable role to play within the examination of paintings, be it for pigment identification alone, or at the other end of the spectrum, for informing issues around the attribution of works of art. This paper provides an overview of the use of electron microscopy in the conservation of paintings by discussing examples of work undertaken by the National Gallery of Victoria and the CSIRO. Work described includes the problem of distinguishing between restorers' original paint in a landscape by Arthur Streeton, and the examination of the ground or priming layer in a Rembrandt portrait which clarified its attribution to his studio. Copyright (2003) Australian Microbeam Analysis Society

  19. Structuralist readings: Painting vs. picture

    OpenAIRE

    Marinkov-Pavlović Lidija

    2016-01-01

    The aim of the paper is to point to two fundamentally different strategies of painting practice, that is, to two subsystems of painting: picture and painting. This differentiation can be made within the framework of semiotic and semiological analyses which have developed in theory under the influence of structuralism. The first part of the paper offers a basic insight into the linguistic foundation of structuralistic concept, and then sets a thesis about the possibility of analogue reconceptu...

  20. Influence of antifouling paint on freshwater invertebrates (Mytilidae, Chironomidae and Naididae): density, richness and composition.

    Science.gov (United States)

    Fujita, D S; Takeda, A M; Coutinho, R; Fernandes, F C

    2015-11-01

    We conducted a study about invertebrates on artificial substrates with different antifouling paints in order to answer the following questions 1) is there lower accumulation of organic matter on substrates with antifouling paints, 2) is invertebrate colonization influenced by the release of biocides from antifouling paints, 3) is the colonization of aquatic invertebrates positively influenced by the material accumulated upon the substrate surface and 4) is the assemblage composition of invertebrates similar among the different antifouling paints? To answer these questions, four structures were installed in the Baía River in February 1st, 2007. Each structure was composed of 7 wood boards: 5 boards painted with each type of antifouling paints (T1, T2, T3, T4 and T5), one painted only with the primer (Pr) and the other without any paint (Cn). After 365 days, we observed a greater accumulation of organic matter in the substrates with T2 and T3 paint coatings. Limnoperna fortunei was recorded in all tested paints, with higher densities in the control, primer, T2 and T3. The colonization of Chironomidae and Naididae on the substrate was positively influenced by L. fortunei density. The non-metric multidimensional scaling (NMDS) of the invertebrate community provided evidence of the clear distinction of invertebrate assemblages among the paints. Paints T2 and T3 were the most similar to the control and primer. Our results suggest that antifouling paints applied on substrates hinder invertebrate colonization by decreasing the density and richness of invertebrates.

  1. Dissolution of organic solvents from painted surfaces into water

    International Nuclear Information System (INIS)

    Wren, J.C.; Jobe, D.J.; Sanipelli, G.G.; Ball, J.M.

    2000-01-01

    The presence of volatile iodine in containment buildings is one of the major safety concerns in the potential event of nuclear reactor accidents. Organic impurities in containment water, originating from various painted structural surfaces and organic materials, could have a significant impact on iodine volatility following an accident. To determine the source and magnitude of organic impurities and their effects on time-dependent iodine volatility, the dissolution for organic constituents from paints used in reactor buildings has been studied under postulated accident conditions. The studies of the organic dissolution from carbon steel coupons coated with zinc-primed vinyl, epoxy-primed polyurethane or epoxy paints over the temperature range 25-90 deg C are reported. Relatively large activation energies were measured for the release of the principal organic compounds from painted surfaces, suggesting it is the release of the solvents from the paint matrix rather than their diffusion through the solution that is the rate determining step for the dissolution mechanism. The similarities in the values of activation energies for the dissolution of different organic compounds from the paints suggest the release rate is independent of the nature of the painted surface or the type of organic being released from the surface. These two observations indicate that it may be possible to write a generalized rate expression for the release of organic compounds from painted surfaces in containment following an accident. The possible implications of these results for predicting iodine volatility in containment are also discussed. (author)

  2. Failure-probability driven dose painting

    DEFF Research Database (Denmark)

    Vogelius, Ivan R; Håkansson, Katrin; Due, Anne K

    2013-01-01

    To demonstrate a data-driven dose-painting strategy based on the spatial distribution of recurrences in previously treated patients. The result is a quantitative way to define a dose prescription function, optimizing the predicted local control at constant treatment intensity. A dose planning study...

  3. Can painted glass felt or glass fibre cloth be used as vapour barrier?

    DEFF Research Database (Denmark)

    El-Khattam, Amira; Andersen, Mie Them; Hansen, Kurt Kielsgaard

    2014-01-01

    In most Nordic homes the interior surfaces of walls and ceilings have some kind of surface treatment for aesthetical reasons. The treatments can for example be glass felt or glass fibre cloth which are painted afterwards. To evaluate the hygrothermal performance of walls and ceilings...... treatments. The surface treatments were glass felt or glass fibre cloth with different types of paints or just paint. The paint types were acrylic paint and silicate paint. The results show that the paint type has high influence on the water vapour resistance while the underlay i.e. glass felt or glass fibre...... acrylic paint on glass felt or glass fibre cloth cannot be used instead of a vapour barrier....

  4. Measurements of tritium for radiological protection purposes in dial painting industry

    International Nuclear Information System (INIS)

    Sawant, J.V.; Rudran, Kamala; Pillai, K.C.

    1990-01-01

    Tritium is used as the active component in self-luminous paint. During dial painting process luminous paints releases tritium in air, causing air contamination. In the present paper results of a preliminary study on air monitoring and estimation of air samples in a local watch industry are given. (author). 5 refs., 2 t abs

  5. Radiation exposure to dial painters from 3H luminous paint industry

    International Nuclear Information System (INIS)

    Sawant, J.V.

    1992-01-01

    Tritium is used as the active component in self-luminous paint. The paper describes in-vitro solubilisation study of luminous paint in blood serum. Besides urine samples of luminous paint workers and air samples of two watch factories were analysed for 3 H. The results of these analysis are also presented. (author). 8 refs., 4 figs., 4 tabs

  6. LOVE AESTHETICS AND PAINTING

    Directory of Open Access Journals (Sweden)

    ZUhal ARDA

    2015-04-01

    Full Text Available Talking about love, while we are talking about a culture and world view means. People love for the people, the passion that inhabited the earth of mankind, the "love" for the first time since love always makes life meaningful emotions has been replaced in the front row between. Throughout history, many artists, scientist, philosopher, and polymath has committed about love are in the works. Poetry, music, theatre, dance, painting, sculpture, each with its own specific language, an art form they are given immortal works about love. Sense of friendship and love of antiquity, Medieval spiritual journeys, when more stunning and dramatic to modern times, trends, human love, to the concept of gaining various dimensions of divine love. Understanding by seeing through these exchanges pictures-meaning maybe the concept of "love" will shed light on the changing values, too. When you do this, both from the east and from the west, giving examples to do a comparison over the years has diversified, changing the concept of "love" art of painting will be an indication that reflected how.

  7. Piezoelectric paint: characterization for further applications

    International Nuclear Information System (INIS)

    Yang, C; Fritzen, C-P

    2012-01-01

    Piezoelectric paint is a very attractive piezoelectric composite in many fields, such as non-destructive testing, or structural health monitoring. However, there are still many obstacles which restrict the real application of it. One of the main problems is that piezoelectric paint lacks a standard fabrication procedure, thus characterization is needed before use. The work presented here explores the characterization of piezoelectric paint. It starts with fabrication of samples with certain piezoelectric powder weight percentages. The microstructures of the samples are investigated by a scanning electron microscope; the results indicate that the fabrication method can produce high quality samples. This is followed by measurements of Young’s modulus and sensitivity. The piezoelectric charge constant d 31 is then deduced from the experimental data; the results agree well with a published result, which validates the effectiveness of the fabrication and characterization method. The characterized piezoelectric paint can expand its applications into different fields and therefore becomes a more promising and competitive smart material. (paper)

  8. Neural correlates of viewing paintings

    DEFF Research Database (Denmark)

    Vartanian, Oshin; Skov, Martin

    2014-01-01

    Many studies involving functional magnetic resonance imaging (fMRI) have exposed participants to paintings under varying task demands. To isolate neural systems that are activated reliably across fMRI studies in response to viewing paintings regardless of variation in task demands, a quantitative...

  9. Matte painting in stereoscopic synthetic imagery

    Science.gov (United States)

    Eisenmann, Jonathan; Parent, Rick

    2010-02-01

    While there have been numerous studies concerning human perception in stereoscopic environments, rules of thumb for cinematography in stereoscopy have not yet been well-established. To that aim, we present experiments and results of subject testing in a stereoscopic environment, similar to that of a theater (i.e. large flat screen without head-tracking). In particular we wish to empirically identify thresholds at which different types of backgrounds, referred to in the computer animation industry as matte paintings, can be used while still maintaining the illusion of seamless perspective and depth for a particular scene and camera shot. In monoscopic synthetic imagery, any type of matte painting that maintains proper perspective lines, depth cues, and coherent lighting and textures saves in production costs while still maintaining the illusion of an alternate cinematic reality. However, in stereoscopic synthetic imagery, a 2D matte painting that worked in monoscopy may fail to provide the intended illusion of depth because the viewer has added depth information provided by stereopsis. We intend to observe two stereoscopic perceptual thresholds in this study which will provide practical guidelines indicating when to use each of three types of matte paintings. We ran subject tests in two virtual testing environments, each with varying conditions. Data were collected showing how the choices of the users matched the correct response, and the resulting perceptual threshold patterns are discussed below.

  10. The ATLAS Liquid Argon Electromagnetic Calorimeter Construction, commissioning and elected test beam results

    CERN Document Server

    Hervás, L

    2004-01-01

    The construction of the ATLAS Liquid Argon Electromagnetic Calorimeter has been completed and commissioning is in progress to prepare the cryostats for lowering into the ATLAS pit. After a brief description of the detector, its construction and readout electronics, this paper summarizes results of quality checks (electrical, connectivity) carried out during the integration of the calorimeter wheels into the cryostats. We present also selected results of its performance, such as linearity, energy resolution, timing resolution, uniformity of the energy response, obtained in beam tests with several series modules. 16 Refs.

  11. Skin Problems in Construction

    Science.gov (United States)

    ... you work with… Wet cement or plaster Abrasive cleaners Paints Adhesives Chemical solvents These materials can contain ... health hazards construction workers face on the job. Production of this card was supported by Grant OH009762 ...

  12. Detection of paint polishing defects

    Science.gov (United States)

    Rebeggiani, S.; Wagner, M.; Mazal, J.; Rosén, B.-G.; Dahlén, M.

    2018-06-01

    Surface finish plays a major role on perceived product quality, and is the first thing a potential buyer sees. Today end-of-line repairs of the body of cars and trucks are inevitably to secure required surface quality. Defects that occur in the paint shop, like dust particles, are eliminated by manual sanding/polishing which lead to other types of defects when the last polishing step is not performed correctly or not fully completed. One of those defects is known as ‘polishing roses’ or holograms, which are incredibly hard to detect in artificial light but are clearly visible in sunlight. This paper will present the first tests with a measurement set-up newly developed to measure and analyse polishing roses. The results showed good correlations to human visual evaluations where repaired panels were estimated based on the defects’ intensity, severity and viewing angle.

  13. Painting: Is It Indigenous to Ghanaian Culture?

    Directory of Open Access Journals (Sweden)

    Emmanuel Antwi

    2014-10-01

    Full Text Available Painting could be said to be well grounded in all cultures worldwide. This is underpinned by the vast record of cave art as globally represented, even though this phenomenon does not seamlessly continue into some ancient traditions that followed. In the face of the above however, to find the traditional period of a people one has to identify the geographical area of this group in order to consider the autochthonous art practice of the place so as to determine its cultural beginnings, extent, and forms of art explored. In the case of Ghana, one observes that, art historians usually site the beginning of painting at the time when colonial educational training of the arts was begun in Achimota from the 1900s. The study was conducted using historical review and analysis, unstructured interview guides as well as participant and non-participant observational techniques in a descriptive design at Sirigu, Ahwiaa and Ntonso, revealing the forms of painting that existed in the country before the introduction of formal training by the colonial masters. The result showed that Ghanaians traditionally practiced different kinds of painting, long before the colonial art training programme was introduced. We feel it should be of concern for any people to be able to tell, not only how, and why but also when they started doing the things that matter to their existence and cultural heritage.

  14. Fra Angelico’s painting technique revealed by terahertz time-domain imaging (THz-TDI)

    DEFF Research Database (Denmark)

    Dandolo, Corinna Ludovica Koch; Picollo, Marcello; Cucci, Costanza

    2016-01-01

    We have investigated with terahertz time-domain imaging (THz-TDI) the well-known Lamentation over the dead Christ panel painting (San Marco Museum, Florence) painted by Fra Giovanni Angelico within 1436 and 1441. The investigation provided a better understanding of the construction and gilding te...

  15. Does antifouling paint select for antibiotic resistance?

    Science.gov (United States)

    Flach, Carl-Fredrik; Pal, Chandan; Svensson, Carl Johan; Kristiansson, Erik; Östman, Marcus; Bengtsson-Palme, Johan; Tysklind, Mats; Larsson, D G Joakim

    2017-07-15

    There is concern that heavy metals and biocides contribute to the development of antibiotic resistance via co-selection. Most antifouling paints contain high amounts of such substances, which risks turning painted ship hulls into highly mobile refuges and breeding grounds for antibiotic-resistant bacteria. The objectives of this study were to start investigate if heavy-metal based antifouling paints can pose a risk for co-selection of antibiotic-resistant bacteria and, if so, identify the underlying genetic basis. Plastic panels with one side painted with copper and zinc-containing antifouling paint were submerged in a Swedish marina and biofilms from both sides of the panels were harvested after 2.5-4weeks. DNA was isolated from the biofilms and subjected to metagenomic sequencing. Biofilm bacteria were cultured on marine agar supplemented with tetracycline, gentamicin, copper sulfate or zinc sulfate. Biofilm communities from painted surfaces displayed lower taxonomic diversity and enrichment of Gammaproteobacteria. Bacteria from these communities showed increased resistance to both heavy metals and tetracycline but not to gentamicin. Significantly higher abundance of metal and biocide resistance genes was observed, whereas mobile antibiotic resistance genes were not enriched in these communities. In contrast, we found an enrichment of chromosomal RND efflux system genes, including such with documented ability to confer decreased susceptibility to both antibiotics and biocides/heavy metals. This was paralleled by increased abundances of integron-associated integrase and ISCR transposase genes. The results show that the heavy metal-based antifouling paint exerts a strong selection pressure on marine bacterial communities and can co-select for certain antibiotic-resistant bacteria, likely by favoring species and strains carrying genes that provide cross-resistance. Although this does not indicate an immediate risk for promotion of mobile antibiotic resistance, the

  16. Moderate Contrast in the Evaluation of Paintings Is Liked More but Remembered Less than High Contrast

    Directory of Open Access Journals (Sweden)

    Katinka Dijkstra

    2017-09-01

    Full Text Available Many visual aspects of paintings, as well as exposure to art and cultural norms, contribute to the aesthetic evaluation of paintings. The current study looked at heightened visual contrast as an important factor in the appreciation of paintings. Participants evaluated abstract digitized paintings that were manipulated in contrast for an appreciation task and were later presented with these paintings in a memory task. The results indicated that for art appreciation, a moderate increase in contrast resulted in the highest appreciation for paintings whereas recognition memory was better for paintings with a higher increase in contrast. These results replicate earlier findings with regard to the role of contrast in aesthetic perception and extend these findings by demonstrating a surprising different effect of contrast manipulation for recognition memory. Confidence with which memory decisions were made was in line with art appreciation decisions not memory performance.

  17. Marine atmospheres provide a tough test for protective paint systems

    Energy Technology Data Exchange (ETDEWEB)

    Steptoe, G.G.C.

    1980-04-01

    Protective paints based on chlorinated rubber (CR) offer good resistance to salt-laden atmospheres and extreme climatic conditions, possess low moisture and oxygen permeability, and are resistant to a variety of chemicals, which allows them to counter the acidic and alkaline conditions tha arise from the corrosion of steel in salt water and from cathodic protection. Airless spray techniques allow CR paints to be applied much faster in thick coatings to large surface areas. CR paints can be formulated to produce a dry film thickness of 80-100 jm in one application. One study concluded that the extra expense for good surface preparation and high-performance paint can be regained in 2-4 yr as a result of lower maintenance costs. CR paints can be used successfully with cathodic protection; however, their tolerance to overprotection is less than that of some alternative systems; CR paints are considered to be suitable for use up to a maximum of -0.95 v. The numerous applications of CR paint include large crude carriers, offshore oil structures, oil terminals (e.g., the Flotta terminal in the Orkneys), and storage tanks.

  18. A study on impact monitoring using a piezoelectric paint sensor

    International Nuclear Information System (INIS)

    Choi, Kyung Woo; Kang, Dong Hoon; Park, Seung Bok; Kang, Lae Hyong

    2015-01-01

    The piezoelectric paint sensor is a paint type sensor comprising of an epoxy and piezoelectric powder, which is the main component of a piezoelectric material. This sensor can be easily attached to any type of structure as compared to other sensors because it is viable to directly apply it on structures, as in the case with a typical paint. In this study, the capability of piezoelectric paint sensor for impact detection was evaluated. In Particular, the applications of the piezoelectric paint sensor for railroad vehicles were considered. There have been various cases reported about the damages caused by flying gravel to the under-cover of the railroad vehicle during operation. In order to prevent this, real-time monitoring of the large under-cover surface of the railroad vehicle is unavoidable. Under the assumption of vehicle application, sensor sensitivities were measured after multiple and prolonged exposure to thermal cycle environment -20⁓60 degrees Celsius). Sensitivity evaluation of paint sensor under environmental conditions was conducted in an aluminum specimen. In results, despite the small variations in sensitivity, we could confirm the applicability of this paint sensor for impact detection even after a severe environmental exposure test

  19. Studies on some Indian paints for radiochemical plants

    International Nuclear Information System (INIS)

    Mahesh Kumar, V.V.; Srinivasan, R.; Natarajan, R.

    1996-01-01

    The choice of paints in areas subjected to contamination and radiation in nuclear installation need special attention. The types of generic coatings are examined with reference to these requirements. Among those examined, certain types of epoxy paints are found to be attractive for these applications. Samples of epoxy paints obtained from some Indian manufacturers are tested for their suitability. Decontaminability and radiation resistance properties are also evaluated with special reference to radiochemical plants. Important specifications for such applications are listed. This report summarizes the results of these studies. (author)

  20. Pigeons can discriminate "good" and "bad" paintings by children.

    Science.gov (United States)

    Watanabe, Shigeru

    2010-01-01

    Humans have the unique ability to create art, but non-human animals may be able to discriminate "good" art from "bad" art. In this study, I investigated whether pigeons could be trained to discriminate between paintings that had been judged by humans as either "bad" or "good". To do this, adult human observers first classified several children's paintings as either "good" (beautiful) or "bad" (ugly). Using operant conditioning procedures, pigeons were then reinforced for pecking at "good" paintings. After the pigeons learned the discrimination task, they were presented with novel pictures of both "good" and "bad" children's paintings to test whether they had successfully learned to discriminate between these two stimulus categories. The results showed that pigeons could discriminate novel "good" and "bad" paintings. Then, to determine which cues the subjects used for the discrimination, I conducted tests of the stimuli when the paintings were of reduced size or grayscale. In addition, I tested their ability to discriminate when the painting stimuli were mosaic and partial occluded. The pigeons maintained discrimination performance when the paintings were reduced in size. However, discrimination performance decreased when stimuli were presented as grayscale images or when a mosaic effect was applied to the original stimuli in order to disrupt spatial frequency. Thus, the pigeons used both color and pattern cues for their discrimination. The partial occlusion did not disrupt the discriminative behavior suggesting that the pigeons did not attend to particular parts, namely upper, lower, left or right half, of the paintings. These results suggest that the pigeons are capable of learning the concept of a stimulus class that humans name "good" pictures. The second experiment showed that pigeons learned to discriminate watercolor paintings from pastel paintings. The subjects showed generalization to novel paintings. Then, as the first experiment, size reduction test

  1. 49 CFR 173.173 - Paint, paint-related material, adhesives, ink and resins.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Paint, paint-related material, adhesives, ink and... Than Class 1 and Class 7 § 173.173 Paint, paint-related material, adhesives, ink and resins. (a) When..., paint-related material, adhesives, ink and resins must be packaged as follows: (1) As prescribed in...

  2. New biocides for antifouling paints

    International Nuclear Information System (INIS)

    Mazziotti, Isabella; Massanisso, Paolo; Cremisini, Carlo; Chiavarini, Salvatore; Fantini, Michele; Morabito, Roberto

    2005-01-01

    The antifouling paints are used for protecting the hulls of the boasts from the undesirable accumulation of micro-organisms, plants, and animals on artificial surfaces (marine biological fouling). These paints constitute a potential risk for the marine environment, because of the presence in their formulation, among the other potentially toxic components, of organic compounds acting as biocide. The environmental problems associated with the use of the organotin compounds as biocides in the antifouling paints, have lead to the international ban of these compounds. In the article the new antifouling paints coming up the national and international market are shortly introduced and discussed, with particular attention respect to the new organic compounds used as biocides. In Italy quite a few marine monitoring campaigns have been carried out for organotin compounds, on the contrary there is a lack of data regarding the presence of other biocides [it

  3. The abstract unconscious in painting

    OpenAIRE

    Parker, David

    2009-01-01

    The Abstract Unconscious in Painting addresses painting as experiential process, critically examining the psychological factors involved in the formation of imagery as it emerges through imaginative responses to the process of mark making and the structuring of space and form. The paper sets this process in relation to theoretical material drawn from Jungian and Post Jungian Psychology ( Avens, 1980; Hillman, 1975) the arts ( Gombrich, 1960; Kuspit, 2000; McKeever, 2005; Worringer, 1908) and ...

  4. Skin painting studies

    International Nuclear Information System (INIS)

    Witschi, H.P.; Smith, L.H.; Goad, M.E.; Anthony, W.B.; Gipson, L.C.; Stephens, T.J.; Whitaker, M.S.

    1987-01-01

    In order to estimate eventual risks to human health as a consequence of incidental and prolonged skin contact, it is necessary to obtain some information on the potential of coal-derived liquids to elicit skin cancer. In addition, it also must be established whether prolonged dermal exposure will produce signs of toxicity not only on the skin but to internal organs. During the past 2 years, they completed a life-long skin painting study with mice designed to answer some of these questions. The following materials were tested: Raw H-coal blend, containing 5700 ppm N; H-coal blend after low hydrotreatment (2650 ppm N); H-coal blend after high hydrotreatment (0.2 ppm N); H-coal home heating oil, a devolatilized version of the high-hydrotreatment H-coal blend; and an H-coal reformed naphtha. Two petroleum-derived references samples were used: Petroleum No. 2 fuel oil and high catalytically cracked naphtha. Benzo(a)pyrene was used as reference substance. Experimental animals were male and female C3H mice

  5. Birds of a Feather... and Clay, Wire, Tissue and Paint!

    Science.gov (United States)

    Feiner, Lois

    2011-01-01

    What began as a review lesson in clay construction quickly became a fun learning experience filled with inspiring conversations and creatively painted birds. This lesson was successful from beginning to end, with a final reward when the artwork was displayed. The author describes the process of working on this project and shares how the students…

  6. Experimental investigation of drag reduction effect of Si-Polyurea paint

    International Nuclear Information System (INIS)

    Lee, In Won; Jang, Ho Yun; Chun, Ho Hwan; Kwon, Sang Hoon

    2008-01-01

    A novel Silicone-Polyurea paint has been newly developed and introduced for the antifouling marine paint. This paint is featured with such advantages as the shock-proofness and the scratch-proofness. In addition, the roughness of the resulting paint film is found to be much less than the conventional SPC AF paints. Ultra fast drying ability enables the formation of very thick paint film, e. g., 500μm. The Silicone-Polyurea resin exhibits similar material behavior as that of silicone rubber in terms of hardness and elongation. This material is regarded as a potent candidate to substantiate the compliant coating for the skin friction reduction. This study aims at the assessment of the drag reducing efficiency of the silicone-polyurea paint

  7. Ron Scott d/b/a White Dog Painting Information Sheet

    Science.gov (United States)

    Ron Scott d/b/a White Dog Painting (the Company) is located in Kansas City, Missouri. The settlement involves renovation activities conducted at property constructed prior to 1978, located in Kansas City, Missouri.

  8. Staicele Paint Manufactory, Ochre Deposit of Reciems: A Retrospective Journey Through the History of Staicele Paint Manufactory and Evaluation of Production Technologies

    Directory of Open Access Journals (Sweden)

    Kokins Aigars

    2017-05-01

    Full Text Available A historical paint manufactory in Staicele, Latvia (1967, was using local resources – colour earth. Oil paint composition consisted of pigment, drying oil, varnish and siccative. It had two different tones that are obtained by using natural colour earth pigments: ochre and its burnt form (burnt umber. Pigment quality was analyzed using historical documents, modern pigment tests, and manufactory technology. Chemical composition, particle size, and pigment tone were determined, and the coating ability was calculated. A palette of oil paints based on the historical recipes for restoring Staicele oil paints was created. Properties of colour earth pigments were compared to specimens taken from the local source of iron that is located near the old paint factory. Results provide a historical and technological insight as well as insight in the properties of the basic paint composition.

  9. Prediction of optical properties of paints

    Science.gov (United States)

    Ďurikovič, Roman; Ágošton, Tomaš

    2007-09-01

    The field of predictive rendering concerns itself with those methods of image synthesis which yield results that do not only look real, but are also radiometrically correct renditions of nature, i.e., which are accurate predictions of what a real scene would look like under given lighting conditions. A real coating consists of pigments, effect pigments, clear lacquer and glaze. A novel and unique combination of real parameters that are commonly measured in the industry and a theoretical reflectance model consisting of measurable parameters is required. Here, the authors design perception parameters and put them into well known surface reflection functions such as He and Torrance. The original contributions are the study of the sub-surface scattering of real paint and the prediction of its appearance in rendered images by the proposed model of light reflection beneath the paint surface.

  10. Noise resistance applied to the study paints

    International Nuclear Information System (INIS)

    Lanchas Garcia-Zarco, S.; Alfosin Perez, V.; Suarez Garcia, A.; Urrejola Madrinan, S.; Sanchez Bermudez, A.

    2015-01-01

    Electrochemical noise is one of the methods of analysis used to interpret the phenomenon of corrosion. It has a number of advantages over other methodology types including its simplicity, its low cost and the fact that it does not disturb the system. This methodology appears to be effective together with other techniques in metal-electrolyte systems. In this case the technique is applied on its own on commercial anti-corrosion paints for which no information is available from other techniques. The main result of this study reveals the effectiveness of the noise resistance parameter, which had already been tested in the lab, when it is used to explain how the paint system behaves in industry. (Author)

  11. Study of Materials and Techniques for the Conservation of Two Miniature Paintings

    Directory of Open Access Journals (Sweden)

    Moustafa Attia Mohie

    2018-03-01

    Full Text Available This research includes a study on the conservation of two miniature paintings produced by unknown artists and probably dated to the second half of the 18th century. These paintings are registered at the Museum of Helwan University, Faculty of Applied Arts, Giza, Egypt, No. (A of 100/6.This research also includes a historical and artistic study of the paintings. To study the materials and techniques used in their execution, several methods were used. XRD, XRD-EDAX was used for the examination and analysis of inorganic materials; in the case of organic materials, FTIR, UV was used to identify the pigment materials, glue, varnish, isolation layer or condition of the paper support. The oil medium in the paint layer was identified by the GLC method. Cross sections of both paintings were examined to find out about the technical knowledge used in constructing the painting / pictorial layers.Finally, this research involves a study of how to separate two oil paintings executed on one paper support, and the most important procedures needed to carry out this step, as well as those necessary for reconstructing the painting layers. In addition, a new method is described to treat cracks.Another new method was used to protect the paper support of these paintings from high relative humidity. This research also proposes a new tear mending method for paper objects instead of the traditional methods used in international paper and manuscript conservation laboratories.

  12. Optimization of Robotic Spray Painting process Parameters using Taguchi Method

    Science.gov (United States)

    Chidhambara, K. V.; Latha Shankar, B.; Vijaykumar

    2018-02-01

    Automated spray painting process is gaining interest in industry and research recently due to extensive application of spray painting in automobile industries. Automating spray painting process has advantages of improved quality, productivity, reduced labor, clean environment and particularly cost effectiveness. This study investigates the performance characteristics of an industrial robot Fanuc 250ib for an automated painting process using statistical tool Taguchi’s Design of Experiment technique. The experiment is designed using Taguchi’s L25 orthogonal array by considering three factors and five levels for each factor. The objective of this work is to explore the major control parameters and to optimize the same for the improved quality of the paint coating measured in terms of Dry Film thickness(DFT), which also results in reduced rejection. Further Analysis of Variance (ANOVA) is performed to know the influence of individual factors on DFT. It is observed that shaping air and paint flow are the most influencing parameters. Multiple regression model is formulated for estimating predicted values of DFT. Confirmation test is then conducted and comparison results show that error is within acceptable level.

  13. A comparison of results for samples collected with bailers constructed of different materials

    International Nuclear Information System (INIS)

    Thomey, N.; Ogle, R.; Jackson, J.

    1992-01-01

    A bailer is one of the most common sampling devices used to collect ground water samples. Bailers constructed from various materials are available; teflon, polyvinyl chloride (PVC), polyethylene, and stainless steel are all commonly used. It is widely recognized that sample results can be affected by the material from which the bailer is constructed. Teflon and stainless steel are usually recommended based upon their inert properties. The cost of these bailers is significantly higher than other types. For the purposes of petroleum storage tank investigations, sampling devices that would not compromise sample quality but be more economical than teflon or stainless steel would be especially desirable. Water samples were collected using the different types of bailers; teflon, stainless steel, PVC, and polyethylene. Split samples were analyzed for benzene, toluene, ethylbenzene, total xylenes, and Total Petroleum Hydrocarbons. The analytical results were compared to determine if differences were due to normal analytical variances or due to interaction of the sample with the sampling device. No difference was noted in the results which were obtained

  14. Construction technique for a chemical plant (III)

    International Nuclear Information System (INIS)

    1978-08-01

    This book mentions design of instrumentation and construction for a chemical plant, which deals with the change of instrumentation, construction, choice of material test, construction of thermal insulation work for a chemical plant, about classification and main materials, the problems on construction, painting plan and construction for a chemical plant such as paint and painting, safety and hygiene, cleaning of a chemical plant on the time for washing and decision of the way of washing, start up test for a chemical plant such as introduction of the check, construction and repair.

  15. RESEARCH ON THE INTENSITY ANALYSIS AND RESULT VISUALIZATION OF CONSTRUCTION LAND IN URBAN PLANNING

    Directory of Open Access Journals (Sweden)

    J. Cui

    2017-09-01

    Full Text Available As a fundamental work of urban planning, the intensity analysis of construction land involves many repetitive data processing works that are prone to cause errors or data precision loss, and the lack of efficient methods and tools to visualizing the analysis results in current urban planning. In the research a portable tool is developed by using the Model Builder technique embedded in ArcGIS to provide automatic data processing and rapid result visualization for the works. A series of basic modules provided by ArcGIS are linked together to shape a whole data processing chain in the tool. Once the required data is imported, the analysis results and related maps and graphs including the intensity values and zoning map, the skyline analysis map etc. are produced automatically. Finally the tool is installation-free and can be dispatched quickly between planning teams.

  16. Smart paint sensor for monitoring structural vibrations

    International Nuclear Information System (INIS)

    Al-Saffar, Y; Baz, A; Aldraihem, O

    2012-01-01

    A class of smart paint sensors is proposed for monitoring the structural vibration of beams. The sensor is manufactured from an epoxy resin which is mixed with carbon black nano-particles to make it electrically conducting and sensitive to mechanical vibrations. A comprehensive theoretical and experimental investigation is presented to understand the underlying phenomena governing the operation of this class of paint sensors and evaluate its performance characteristics. A theoretical model is presented to model the electromechanical behavior of the sensor system using molecular theory. The model is integrated with an amplifier circuit in order to predict the current and voltage developed by the paint sensor when subjected to loading. Furthermore, the sensor/amplifier circuit models are coupled with a finite element model of a base beam to which the sensor is bonded. The resulting multi-field model is utilized to predict the behavior of both the sensor and the beam when subjected to a wide variety of vibration excitations. The predictions of the multi-field finite element model are validated experimentally and the behavior of the sensor is evaluated both in the time and the frequency domains. The performance of the sensor is compared with the performance of conventional strain gages to emphasize its potential and merits. The presented techniques are currently being extended to sensors that can monitor the vibration and structural power flow of two-dimensional structures. (paper)

  17. Recycling of paint-contaminated grit.

    Science.gov (United States)

    Taha, R; al-Alawi, D; al-Nabhani, M; Pillay, A E; al-Hamdi, A

    2001-08-01

    The impact on the environment of using paint-contaminated grit (PCG) as a partial or full replacement for sand in Portland cement mortar and asphalt concrete mixtures was investigated. The grit waste material originated from abrasive blasting of offshore steel structures. There is a major environmental concern regarding the safe disposal of the spent blasting abrasives that contain paint chips or paint particles and other debris removed from the surface of the steel structures. This work investigated the potential reuse of PCG in Portland cement concrete (PCC) and hot mix asphalt concrete. Several studies were conducted to establish the integrity of the materials containing the recycled grit. These included the chemical and physical characterization of natural sand and PCG, the assay of leaches associated with the grit material for hazardous metal contaminants, such as Cr, Cd and Pb, and the assessment of the mechanical properties of the PCG-substituted mortars by applying special tests (such as Marshall stability and determination of the flow properties) to the PCG-substituted asphalt concrete mixtures. The overall results demonstrated that the potential reuse of PCG in PCC and asphalt concrete mixtures would not pose any environmental threat and could produce several benefits, such as reduced disposal costs, protection of water sources from improper disposal practices and reduced costs in the production of natural aggregates and asphalt cement.

  18. Photocatalytic surface reactions on indoor wall paint.

    Science.gov (United States)

    Salthammer, T; Fuhrmann, F

    2007-09-15

    The reduction of indoor air pollutants by air cleaning systems has received considerable interest, and a number of techniques are now available. So far, the method of photocatalysis was mainly applied by use of titanium dioxide (TiO2) in flow reactors under UV light of high intensity. Nowadays, indoor wall paints are equipped with modified TiO2 to work as a catalyst under indoor daylight or artificial light. In chamber experiments carried out under indoor related conditions itwas shown thatthe method works for nitrogen dioxide with air exchange and for formaldehyde without air exchange at high concentrations. In further experiments with volatile organic compounds (VOCs), a small effect was found for terpenoids with high kOH rate constants. For other VOCs and carbon monoxide there was no degradation at all or the surface acted as a reversible sink. Secondary emissions from the reaction of paint constituents were observed on exposure to light. From the results it is concluded that recipes of photocatalytic wall paints need to be optimized for better efficiency under indoor conditions.

  19. Ultraviolet-radiation-curable paints

    Energy Technology Data Exchange (ETDEWEB)

    Grosset, A M; Su, W F.A.; Vanderglas, E

    1981-09-30

    In product finishing lines, ultraviolet radiation curing of paints on prefabricated structures could be more energy efficient than curing by natural gas fired ovens, and could eliminate solvent emission. Diffuse ultraviolet light can cure paints on three dimensional metal parts. In the uv curing process, the spectral output of radiation sources must complement the absorption spectra of pigments and photoactive agents. Photosensitive compounds, such as thioxanthones, can photoinitiate unsaturated resins, such as acrylated polyurethanes, by a free radical mechanism. Newly developed cationic photoinitiators, such as sulfonium or iodonium salts (the so-called onium salts) of complex metal halide anions, can be used in polymerization of epoxy paints by ultraviolet light radiation. One-coat enamels, topcoats, and primers have been developed which can be photoinitiated to produce hard, adherent films. This process has been tested in a laboratory scale unit by spray coating these materials on three-dimensional objects and passing them through a tunnel containing uv lamps.

  20. Analysis of chromium and sulphate origins in construction recycled materials based on leaching test results.

    Science.gov (United States)

    Del Rey, I; Ayuso, J; Galvín, A P; Jiménez, J R; López, M; García-Garrido, M L

    2015-12-01

    Twenty samples of recycled aggregates from construction and demolition waste (CDW) with different compositions collected at six recycling plants in the Andalusia region (south of Spain) were characterised according to the Landfill Directive criteria. Chromium and sulphate were identified as the most critical compounds in the leachates. To detect the sources of these two pollutant constituents in recycled aggregate, environmental assessments were performed on eight construction materials (five unused ceramic materials, two old crushed concretes and one new mortar manufactured in the laboratory). The results confirmed that leached sulphate and Cr were mainly released by the ceramic materials (bricks and tiles). To predict the toxicological consequences, the oxidation states of Cr (III) and Cr (VI) were measured in the leachates of recycled aggregates and ceramic materials classified as non-hazardous. The bricks and tiles mainly released total Cr as Cr (III). However, the recycled aggregates classified as non-hazardous according to the Landfill Directive criteria mainly released Cr (VI), which is highly leachable and extremely toxic. The obtained results highlight the need for legislation that distinguishes the oxidative state in which chromium is released into the environment. Leaching level regulations must not be based solely on total Cr, which can lead to inaccurate predictions. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Fabrication and calibration of a piezoelectric nanocomposite paint

    Science.gov (United States)

    Osho, Samuel; Wu, Nan; Aramfard, Mohammad; Deng, Chuang; Ojo, Olanrewaju

    2018-03-01

    A new liquid form piezoelectric nanocomposite paint material is fabricated with possible applications as dynamic strain sensors and/or piezoelectric transducers. The applied coating is in the form of low-cost paint, which is flexible and bonds strongly on a metallic surface after drying out via the solvent-casting method. The nanocomposite is produced by an ultrasonic mixture of varying percentages of zinc oxide (ZnO) nanoparticle water dispersion, poly vinyl acetate glue (PVA) and carbon nanotubes (CNTs). ZnO nanoparticles are used as the piezoelectric sensing elements in a PVA matrix of the paint, while CNTs are introduced as robust bridge of ZnO particles enhancing the piezoelectricity and material properties. Transmission electron microscopy (TEM) images confirmed the linkages of ZnO nanoparticles in the composite by CNTs. Through piezoelectricity calibration, the optimum mixing ratio with the highest piezoelectricity is 78.1 wt% ZnO, 19.5 wt% PVA glue and 2.4 wt% multi-wall carbon nanotubes (MWCNTs). Through nanoindentation tests for the characterization of the mechanical properties of the nano-composite paint, it is found that Young’s modulus and hardness reached a threshold point in the increment in the addition of CNTs to the paint before showing signs of decline. Detailed analysis and explanation of the calibration results and physical phenomenon are provided. The stable paint material is ready to be applied on rough area of engineering structures as sensor and transducer.

  2. An investigation of the neural substrates of mind wandering induced by viewing traditional Chinese landscape paintings

    Directory of Open Access Journals (Sweden)

    Tingting eWang

    2015-01-01

    Full Text Available The present study was conducted to investigate whether the calming effect induced by viewing traditional Chinese landscape paintings would make disengagement from that mental state more difficult, as measured by performance on a cognitive control task. In Experiment 1 we examined the subjective experience of viewing traditional Chinese landscape paintings vs. realistic oil landscape paintings in a behavioral study. Our results confirmed that, as predicted, traditional Chinese landscape paintings induce greater levels of relaxation and mind wandering and lower levels of object-oriented absorption and recognition, compared to realistic oil landscape paintings. In Experiment 2 we used functional Magnetic Resonance Imaging (fMRI to explore the behavioural and neural effects of viewing traditional Chinese landscape paintings on a task requiring cognitive control (i.e., the flanker task—administered immediately following exposure to paintings. Contrary to our prediction, the behavioural data demonstrated that compared to realistic oil landscape paintings, exposure to traditional Chinese landscape paintings had no effect on performance on the flanker task. However, the neural data demonstrated an interaction effect such that there was greater activation in the inferior parietal cortex (IPC and the superior frontal gyrus (SFG on incongruent compared with congruent flanker trials when participants switched from viewing traditional Chinese landscape paintings to the flanker task than when they switched from realistic oil landscape paintings. These results suggest that switching from traditional Chinese landscape paintings placed greater demands on the brain’s attention and working memory networks during the flanker task than did switching from realistic oil landscape paintings.

  3. The Conservation of Panel paintings

    DEFF Research Database (Denmark)

    Until the early 17th century almost all portable paintings were created on wood supports, including masterpieces by famous painters, ranging from Giotto to Dürer to Rembrandt. The structural conservation of these paintings requires specific knowledge and skills as the supports are susceptible...... and conservation of these artworks. The Netherlands Organisation for Scientific Research (NWO) and the Rijksmuseum Amsterdam brought together a group of experts from different disciplines to recommend specific areas in the field that would benefit from systematic research. The experts concluded that targeted...

  4. Is painting by elephants in zoos as enriching as we are led to believe?

    Directory of Open Access Journals (Sweden)

    Megan English

    2014-07-01

    Full Text Available The relationship between the activity of painting and performance of stereotyped and other stress-related behaviour was investigated in four captive Asian elephants at Melbourne Zoo, Australia. The activity involved the elephant being instructed to paint on a canvas by its keeper in front of an audience. Painting by elephants in zoos is commonly believed to be a form of enrichment, but this assumption had not been based on any systematic research. If an activity is enriching we would expect stress-related behaviour to be reduced but we found no evidence of the elephants anticipating the painting activity and no effect on the performance of stereotyped or other stress-related behaviour either before or after the painting session. This indicates that the activity does not fulfil one of the main aims of enrichment. However, if an elephant was not selected to paint on a given day this was associated with higher levels of non-interactive behaviour, a possible indicator of stress. Behavioural observations associated with ear, eye and trunk positions during the painting session showed that the elephant’s attentiveness to the painting activity or to the keeper giving instruction varied between individuals. Apart from positive reinforcement from the keeper, the results indicated that elephants gain little enrichment from the activity of painting. Hence, the benefits of this activity appear to be limited to the aesthetic appeal of these paintings to the people viewing them.

  5. Construction of Kashiwazaki-Kariwa Nuclear Power Station Results of manufacturing concrete

    International Nuclear Information System (INIS)

    Morishita, Hideki; Tsuchiya, Yoshimasa; Eguchi, Kiyoshi; Hosaka, Hiroshi

    1998-01-01

    The construction of Kashiwazaki-Kariwa Nuclear Power Station of Tokyo Electric Power Co., Inc. was completed in July, 1997. Seven nuclear power plants generate about 8.2 million kW, and it is the largest nuclear power station in the world. In the construction, from May, 1980 to August, 1996, the concrete of 2.42 million m 3 for architecture and 1.04 million m 3 for civil engineering, 3.46 million m 3 in total, and the mortar for artificial rock bed of 430,000 m 3 were manufactured and placed. The results of manufacturing concrete from beginning to finish are shown. The specification of concrete was different for No. 1 plant, No. 2 and 5 plants, No. 3 and 4 plants and No. 6 and 7 plants. As to the mixing of concrete, the specification and the materials used are reported. The features of the facilities for manufacturing concrete are explained. The flowchart of the quality control of materials and concrete is shown. The material testing of cement and aggregate, the test of water quality and the material testing of admixtures were carried out. As for concrete, the weight of unit volume, slump, air quantity, concrete temperature, chloride content, strength and alkali reactivity were examined. (K.I.)

  6. Fiber Bragg Grating Sensor to Monitor Stress Kinetics in Drying Process of Commercial Latex Paints

    Directory of Open Access Journals (Sweden)

    Ivo de Lourenço

    2010-05-01

    Full Text Available In this paper, we report a study about the application of packaged fiber Bragg gratings used as strain sensors to monitor the stress kinetics during the drying process of commercial latex paints. Three stages of drying with distinct mechanical deformation and temporal behaviors were identified for the samples, with mechanical deformation from 15 μm to 21 μm in the longitudinal film dimension on time intervals from 370 to 600 minutes. Drying time tests based on human sense technique described by the Brazilian Technical Standards NBR 9558 were also done. The results obtained shows that human sense technique has a limited perception of the drying process and that the optical measurement system proposed can be used to characterize correctly the dry-through stage of paint. The influence of solvent (water addition in the drying process was also investigated. The paint was diluted with four parts paint and one part water (80% paint, and one part paint and one part water (50% paint. It was observed that the increase of the water ratio mixed into the paint decreases both the mechanical deformation magnitude and the paint dry-through time. Contraction of 5.2 μm and 10.4 μm were measured for concentrations of 50% and 80% of paint in the mixture, respectively. For both diluted paints the dry-through time was approximately 170 minutes less than undiluted paint. The optical technique proposed in this work can contribute to the development of new standards to specify the drying time of paint coatings.

  7. Experimental study of canvas characterization for paintings

    Science.gov (United States)

    Cornelis, Bruno; Dooms, Ann; Munteanu, Adrian; Cornelis, Jan; Schelkens, Peter

    2010-02-01

    The work described here fits in the context of a larger project on the objective and relevant characterization of paintings and painting canvas through the analysis of multimodal digital images. We captured, amongst others, X-ray images of different canvas types, characterized by a variety of textures and weave patterns (fine and rougher texture; single thread and multiple threads per weave), including raw canvas as well as canvas processed with different primers. In this paper, we study how to characterize the canvas by extracting global features such as average thread width, average distance between successive threads (i.e. thread density) and the spatial distribution of primers. These features are then used to construct a generic model of the canvas structure. Secondly, we investigate whether we can identify different pieces of canvas coming from the same bolt. This is an important element for dating, authentication and identification of restorations. Both the global characteristics mentioned earlier and some local properties (such as deviations from the average pattern model) are used to compare the "fingerprint" of different pieces of cloth coming from the same or different bolts.

  8. The Extended Northern ROSAT Galaxy Cluster Survey (NORAS II). I. Survey Construction and First Results

    Energy Technology Data Exchange (ETDEWEB)

    Böhringer, Hans; Chon, Gayoung; Trümper, Joachim [Max-Planck-Institut für Extraterrestrische Physik, D-85748 Garching (Germany); Retzlaff, Jörg [ESO, D-85748 Garching (Germany); Meisenheimer, Klaus [Max-Planck-Institut für Astronomy, Königstuhl 17, D-69117 Heidelberg (Germany); Schartel, Norbert [ESAC, Camino Bajo del Castillo, Villanueva de la Cañada, E-28692 Madrid (Spain)

    2017-05-01

    As the largest, clearly defined building blocks of our universe, galaxy clusters are interesting astrophysical laboratories and important probes for cosmology. X-ray surveys for galaxy clusters provide one of the best ways to characterize the population of galaxy clusters. We provide a description of the construction of the NORAS II galaxy cluster survey based on X-ray data from the northern part of the ROSAT All-Sky Survey. NORAS II extends the NORAS survey down to a flux limit of 1.8 × 10{sup −12} erg s{sup −1} cm{sup −2} (0.1–2.4 keV), increasing the sample size by about a factor of two. The NORAS II cluster survey now reaches the same quality and depth as its counterpart, the southern REFLEX II survey, allowing us to combine the two complementary surveys. The paper provides information on the determination of the cluster X-ray parameters, the identification process of the X-ray sources, the statistics of the survey, and the construction of the survey selection function, which we provide in numerical format. Currently NORAS II contains 860 clusters with a median redshift of z  = 0.102. We provide a number of statistical functions, including the log N –log S and the X-ray luminosity function and compare these to the results from the complementary REFLEX II survey. Using the NORAS II sample to constrain the cosmological parameters, σ {sub 8} and Ω{sub m}, yields results perfectly consistent with those of REFLEX II. Overall, the results show that the two hemisphere samples, NORAS II and REFLEX II, can be combined without problems into an all-sky sample, just excluding the zone of avoidance.

  9. The Extended Northern ROSAT Galaxy Cluster Survey (NORAS II). I. Survey Construction and First Results

    International Nuclear Information System (INIS)

    Böhringer, Hans; Chon, Gayoung; Trümper, Joachim; Retzlaff, Jörg; Meisenheimer, Klaus; Schartel, Norbert

    2017-01-01

    As the largest, clearly defined building blocks of our universe, galaxy clusters are interesting astrophysical laboratories and important probes for cosmology. X-ray surveys for galaxy clusters provide one of the best ways to characterize the population of galaxy clusters. We provide a description of the construction of the NORAS II galaxy cluster survey based on X-ray data from the northern part of the ROSAT All-Sky Survey. NORAS II extends the NORAS survey down to a flux limit of 1.8 × 10 −12 erg s −1 cm −2 (0.1–2.4 keV), increasing the sample size by about a factor of two. The NORAS II cluster survey now reaches the same quality and depth as its counterpart, the southern REFLEX II survey, allowing us to combine the two complementary surveys. The paper provides information on the determination of the cluster X-ray parameters, the identification process of the X-ray sources, the statistics of the survey, and the construction of the survey selection function, which we provide in numerical format. Currently NORAS II contains 860 clusters with a median redshift of z  = 0.102. We provide a number of statistical functions, including the log N –log S and the X-ray luminosity function and compare these to the results from the complementary REFLEX II survey. Using the NORAS II sample to constrain the cosmological parameters, σ 8 and Ω m , yields results perfectly consistent with those of REFLEX II. Overall, the results show that the two hemisphere samples, NORAS II and REFLEX II, can be combined without problems into an all-sky sample, just excluding the zone of avoidance.

  10. Design, Construction, Installation and First Commissioning Results of the LHC Cryogenic System

    CERN Document Server

    Claudet, S

    2006-01-01

    The cryogenic system of the Large Hadron Collider (LHC) will be, upon its completion in 2006, the largest in the world in terms of refrigeration capacity with an equivalent to 144 kW at 4.5 K, about 400'000 litres of superfluid helium with 25 km of superconducting magnets below 2 K leading to a cryogen inventory of 100 tons of helium. The challenges involved in the design, construction and installation, as well as the first commissioning results will be addressed in this talk. Particular mention will be made of the problems encountered and how they were or are being solved. Perspectives for LHC will be presented. General considerations for future large cryogenic systems will be briefly proposed.

  11. Annular electromagnetic pumps-construction and testing-theory, and comparison with experimental results

    International Nuclear Information System (INIS)

    Cambillard, E.P.; Schwab, B.L.

    1964-01-01

    This report consists of three sections. The first is concerned with the description of different pumps which have been constructed, tests on these which have been completed and the results obtained. The second section presents a theoretical method for the determination of the coefficients, taking in account the break of the magnetic circuit. It is shown that the preliminary design calculations of the annular pumps can be made, neglecting the break of the magnetic circuit, by further assigning essential magnitudes (pressure, losses) with easily calculated coefficients. The third section of this report uses the theoretical bases exposed in the second section, and develop a new annular pump calculation method which takes-into account both the current out of balance and any type of winding. (authors) [fr

  12. Air ionizer application for electrostatic discharge (ESD) dust removal in automotive painting industry

    Science.gov (United States)

    Yosri, M. H.; Muhamad, P.; Ismail, M. A.; Yatim, N. H. M.

    2018-01-01

    Dust and fiber have been identified among the highest contributor for the defect in automotive painting line with range from 40% to 50% of total defect breakdown. Eventually, those defects will effect on both visual appearance and also the performance of the parts. In addition, the significance of controlling dust in an assembly line is crucial in order to maintain the quality of the product, part performance yield and effect on workers’ health [1]. By considering the principle and technology applied in electronic clean room technology, the ionizer have been introduce to control dust contamination in automotive painting line. The first auto maker industry whom found the effectiveness of the clean room application to reduce the defect and production line downtime was Chrysler [2]. By doing so, it’s allowed the transmission plant to offer 50 000 mile guarantee on the transmission systems. The main objective of this research is to verify the effectiveness of ionizer device in order to reduce the rejection contribute by dust and fiber particle in the automotive painting line. Towards the main objective, a few sub areas will be explored, as a supporting factor to ensure the result gain from this study is solid and constructive. The experiment start by verifying the electrostatic value of the raw material (substrate) before and after the ionizer treatment. From here the correlation of the electrostatic value generated by the raw material that effect to production pass rate can be explored. At the meantime, the performance of the production pass rate after the ionizer treatment which related to the painted surface area can be determined.

  13. Stop and Paint the Flowers.

    Science.gov (United States)

    Phillips, Shelley

    2002-01-01

    Describes an art lesson where students used watercolors to paint a flower bouquet arranged in a vase. Explains that the students viewed examples of flower bouquets by artists such as Vincent van Gogh and Odilon Redon. Discusses, in detail, the process of creating the artworks. (CMK)

  14. Materials science challenges in paintings.

    Science.gov (United States)

    Walter, Philippe; de Viguerie, Laurence

    2018-01-23

    Through the paintings of the old masters, we showcase how materials science today provides us with a vision of the processes involved in the creation of a work of art: the choice of materials, the painter's skill in handling these materials, and the perception of the finished work.

  15. Materials science challenges in paintings

    Science.gov (United States)

    Walter, Philippe; de Viguerie, Laurence

    2018-02-01

    Through the paintings of the old masters, we showcase how materials science today provides us with a vision of the processes involved in the creation of a work of art: the choice of materials, the painter's skill in handling these materials, and the perception of the finished work.

  16. Desalination of painted brick vaults

    DEFF Research Database (Denmark)

    Larsen, Poul Klenz

    The subject of the thesis is salt and moisture movement that causes damage to wall paintings on church vaults. The deterioration was studied in the churches of Fanefjord, Kirkerup and Brarup. A desalination method was tested om location. The salt and moisture transfer was examined in detail...

  17. Zinc, Paint loss and Harmony in blue

    DEFF Research Database (Denmark)

    Vila, Anna; Krarup Andersen, Cecil; Baadsgaard, Elizabeth

    2016-01-01

    P.S. Krøyer’s late and most popular paintings have proven very difficult to preserve, and as zinc white has been known to cause structural problems in paintings, the authors investigate if the damage seen in the late paintings can be related to the use of this relatively new pigment. Eight painti...

  18. Lagrangian torus fibration of quintic Calabi-Yau hypersurfaces II: Technical results on gradient flow construction

    OpenAIRE

    Ruan, Wei-Dong

    2004-01-01

    This paper is the sequel to my recent paper [10]. It will provide technical details of our gradient flow construction and related problems, which are essential for our construction of Lagrangian torus fibrations in [10] and subsequent papers [11, 13, 14].

  19. The utilization of mind map painting on 3D shapes with curved faces

    Science.gov (United States)

    Nur Sholikhah, Ayuk; Usodo, Budi; Pramudya, Ikrar

    2017-12-01

    This paper aims to study on the use of mind map painting media on material with 3D shapes with curved faces and its effect on student’s interest. Observation and literature studies were applied as the research method with the sake design of utilization of mind map painting. The result of this research is the design of mind map painting media can improve students' ability to solve problems, improve the ability to think, and maximize brain power. In relation, mind map painting in learning activities is considered to improve student interest.

  20. The Effect of Marketing Strategies Construct on Firm Performance: Results from Pilot Survey

    Directory of Open Access Journals (Sweden)

    Fazal Akbar

    2017-04-01

    Full Text Available The difficulties that face small and medium organization in any field are severe nowadays. The importance of SMEs is vital. Different researchers have proposed different success factors for small and medium organization, like finance, skilled workforce, technology, innovation and most importantly marketing. Marketing is the spine of any organization, through marketing firms bring innovation, awareness of competitors, awareness of products, building relation with customers. A good marketing strategy increases the sale of product for sure. The small and medium organization face difficulties in doing marketing, because of limited finance, limited or unskilled staff, unawareness of marketing strategies, no or less use of media. This paper presents the pilot survey result for the study of effect of marketing strategies construct (entrepreneurial, guerrilla, relationship, ambush, viral and niche marketing, on firm performance. Descriptive statistics, normality, reliability and preliminary factor analysis (EFA test were run, all the data were presented in tables below. The result shows that all the questionnaire were normally distributed, and the outcomes are all normal.

  1. Computer Aided Design of a Low-Cost Painting Robot

    Directory of Open Access Journals (Sweden)

    SYEDA MARIA KHATOON ZAIDI

    2017-10-01

    Full Text Available The application of robots or robotic systems for painting parts is becoming increasingly conventional; to improve reliability, productivity, consistency and to decrease waste. However, in Pakistan only highend Industries are able to afford the luxury of a robotic system for various purposes. In this study we propose an economical Painting Robot that a small-scale industry can install in their plant with ease. The importance of this robot is that being cost effective, it can easily be replaced in small manufacturing industries and therefore, eliminate health problems occurring to the individual in charge of painting parts on an everyday basis. To achieve this aim, the robot is made with local parts with only few exceptions, to cut costs; and the programming language is kept at a mediocre level. Image processing is used to establish object recognition and it can be programmed to paint various simple geometries. The robot is placed on a conveyer belt to maximize productivity. A four DoF (Degree of Freedom arm increases the working envelope and accessibility of painting different shaped parts with ease. This robot is capable of painting up, front, back, left and right sides of the part with a single colour. Initially CAD (Computer Aided Design models of the robot were developed which were analyzed, modified and improved to withstand loading condition and perform its task efficiently. After design selection, appropriate motors and materials were selected and the robot was developed. Throughout the development phase, minor problems and errors were fixed accordingly as they arose. Lastly the robot was integrated with the computer and image processing for autonomous control. The final results demonstrated that the robot is economical and reduces paint wastage.

  2. Computer aided design of a low-cost painting robot

    International Nuclear Information System (INIS)

    Zaidi, S.M.; Janejo, F.; Mujtaba, S.B.

    2017-01-01

    The application of robots or robotic systems for painting parts is becoming increasingly conventional; to improve reliability, productivity, consistency and to decrease waste. However, in Pakistan only highend Industries are able to afford the luxury of a robotic system for various purposes. In this study we propose an economical Painting Robot that a small-scale industry can install in their plant with ease. The importance of this robot is that being cost effective, it can easily be replaced in small manufacturing industries and therefore, eliminate health problems occurring to the individual in charge of painting parts on an everyday basis. To achieve this aim, the robot is made with local parts with only few exceptions, to cut costs; and the programming language is kept at a mediocre level. Image processing is used to establish object recognition and it can be programmed to paint various simple geometries. The robot is placed on a conveyer belt to maximize productivity. A four DoF (Degree of Freedom) arm increases the working envelope and accessibility of painting different shaped parts with ease. This robot is capable of painting up, front, back, left and right sides of the part with a single colour. Initially CAD (Computer Aided Design) models of the robot were developed which were analyzed, modified and improved to withstand loading condition and perform its task efficiently. After design selection, appropriate motors and materials were selected and the robot was developed. Throughout the development phase, minor problems and errors were fixed accordingly as they arose. Lastly the robot was integrated with the computer and image processing for autonomous control. The final results demonstrated that the robot is economical and reduces paint wastage. (author)

  3. Vision of Spaces in the Paintings of the Asháninka sheripiare Noe Morales Silva

    Directory of Open Access Journals (Sweden)

    Luisa Elvira Belaunde

    2011-02-01

    Full Text Available Amazonian shamanic painting is a hybrid art born from the coming together of Western figurative techniques, indigenous body painting and visionary shamanic experiences. It is a testimonial art by which painters express their visionary experiences to a foreign public aiming to understand the Amazonian universe. In his watercolors and drawings, the Asháninka healer Noé Silva Morales bears witness to his life as a sheripiare through the construction of visionary spaces carefully painted with skins of luminous designs.

  4. Frames as visual links between paintings and the museum environment: An analysis of statistical image properties

    Directory of Open Access Journals (Sweden)

    Christoph eRedies

    2013-11-01

    Full Text Available Frames provide a visual link between artworks and their surround. We asked how image properties change as an observer zooms out from viewing a painting alone, to viewing the painting with its frame and, finally, the framed painting in its museum environment (museum scene. To address this question, we determined three higher-order image properties that are based on histograms of oriented luminance gradients. First, complexity was measured as the sum of the strengths of all gradients in the image. Second, we determined the self-similarity of histograms of the orientated gradients at different levels of spatial analysis. Third, we analyzed how much gradient strength varied across orientations (anisotropy. Results were obtained for three art museums that exhibited paintings from three major periods of Western art. In all three museums, the mean complexity of the frames was higher than that of the paintings or the museum scenes. Frames thus provide a barrier of complexity between the paintings and their exterior. By contrast, self-similarity and anisotropy values of images of framed paintings were intermediate between the images of the paintings and the museum scenes, i.e., the frames provided a transition between the paintings and their surround. We also observed differences between the three museums that may reflect modified frame usage in different art periods. For example, frames in the museum for 20th century art tended to be smaller and less complex than in the two other two museums that exhibit paintings from earlier art periods (13th-18th century and 19th century, respectively. Finally, we found that the three properties did not depend on the type of reproduction of the paintings (photographs in museums, scans from books or images from the Google Art Project. To the best of our knowledge, this study is the first to investigate the relation between frames and paintings by measuring physically defined, higher-order image properties.

  5. Effect of corrosive marine atmosphere on construction materials in Tanzania: Exposure sites and preliminary results

    International Nuclear Information System (INIS)

    Mmari, A.G.; Uiso, C.B.S.; Makundi, I.N.; Potgieter-Vermaak, S.S.; Potgieter, J.H.; Van Grieken, R.

    2007-01-01

    Air pollution studies in Africa are limited and the influence of ambient air quality on buildings and constructions have not been investigated in the larger part of Sub-Saharan Africa. The increasing burden of emission from industry, traffic and coal power plants on ambient air pollution in Sub-Saharan Africa necessitated reviewing previous and current studies. In South Africa a 20-year exposure program, focusing on the effect of ambient exposure on various metals and alloys, showed that the amount of rainfall, relative humidity, atmospheric pollution, wind speed, solar radiation and structural design are some of the factors controlling atmospheric corrosion. Tanzania, being among the Sub-Saharan African countries and partly bordered by Indian ocean, the main source of marine atmosphere, experiences corrosive degradation on metal roofing and cementitious materials. This paper describes the exposure site set-up and will report on some preliminary results of air quality and its relation with the meteorological conditions, as well as surface changes observed, for the year one of exposure. These will thereafter be compared to the completed European and Asian studies, as reported by CLRTAP and RAPIDC respectively. (author)

  6. Investigation of leaching of an antifouling agent from marine paint formulations using radiotracer technique

    International Nuclear Information System (INIS)

    Pant, H.J.; Sharma, V.K.; Gursharan Singh; Kalgutkar, D.B.; Patil, S.P.; Jayachandran, N.; Unni, V.K.P.

    2012-01-01

    A radiotracer technique was used to investigate the leaching of an antifouling agent from different marine paint formulations with an objective to select the best paint formulation for bulk production. The antifouling agent (Diuron) itself was labeled with carbon-14 (half-life: 5,730 years, β-energy: 156 keV) and used as a radiotracer. The different paint formulations added with radiolabeled Diuron were applied onto suitably selected substrates and measured for initial intensity of β-radiation using a Geiger-Muller detector connected to a ratemeter. The painted substrates were subjected to shower tests for a pre-decided time and subsequently measured for β-radiations. The comparison of intensity of β-radiations in substrates prior and post shower tests provides information about leaching of antifouling agent Diuron from the paint formulation. The high leaching percentage of antifouling agent Diuron post shower tests indicates non-suitability of paint formulation for marine and civil structures. However, low leaching rate of Diuron will make a paint formulation more efficient and suitable. Based on the results of investigation, a paint formulation with minimum leaching rate was identified and selected for bulk production by a paint company. (author)

  7. Optical measurements of paintings and the creation of an artwork database for authenticity.

    Directory of Open Access Journals (Sweden)

    Seonhee Hwang

    Full Text Available Paintings have high cultural and commercial value, so that needs to be preserved. Many techniques have been attempted to analyze properties of paintings, including X-ray analysis and optical coherence tomography (OCT methods, and enable conservation of paintings from forgeries. In this paper, we suggest a simple and accurate optical analysis system to protect them from counterfeit which is comprised of fiber optics reflectance spectroscopy (FORS and line laser-based topographic analysis. The system is designed to fully cover the whole area of paintings regardless of its size for the accurate analysis. For additional assessments, a line laser-based high resolved OCT was utilized. Some forgeries were created by the experts from the three different styles of genuine paintings for the experiments. After measuring surface properties of paintings, we could observe the results from the genuine works and the forgeries have the distinctive characteristics. The forgeries could be distinguished maximally 76.5% with obtained RGB spectra by FORS and 100% by topographic analysis. Through the several executions, the reliability of the system was confirmed. We could verify that the measurement system is worthwhile for the conservation of the valuable paintings. To store the surface information of the paintings in micron scale, we created a numerical database. Consequently, we secured the databases of three different famous Korean paintings for accurate authenticity.

  8. Long-term Stabilization of Disturbed Slopes Resulting from Construction Operations

    Science.gov (United States)

    2018-01-01

    Highway construction disturbs soil, which must be stabilized to prevent migration of soil particles into water bodies. Stabilization is enforced by law, regulation, and a permit system. Stabilization is most efficiently attained by reestablishment of...

  9. Microclimate boxes for panel paintings

    DEFF Research Database (Denmark)

    Wadum, Jørgen

    1998-01-01

    The use of microclimate boxes to protect vulnerable panel paintings is, therefore, not a new phenomenon of the past two or three decades. Rather, it has been a concern for conservators and curators to protect these objects of art at home and in transit since the end of the nineteenth century....... The increased number of travelling exhibitions in recent years has heightened the need to protect paintings during circulation (Thomson 1961; Mecklenburg 1991). The use and design of microclimate boxes have been evolving since 1892. These boxes may be divided into three broad groups: those using an active...... buffer material to stabilize the internal RH, a more recent box containing no added buffer material, and, in recent times, boxes with an altered gas content. Another concern is the appearance (aesthetics) of the box....

  10. Conservation of 19th and early 20th century oil paintings - in situ studies using the environmental scanning electron microscope

    International Nuclear Information System (INIS)

    White, R.; Phillips, M.; Wuhrer, R.; Thomas, D.

    2003-01-01

    in layers of paints it allows. X-ray diffraction (XRD) can be used to ascertain pigments based on their crystal structure but this technique is generally ruled out due to the relatively large sample required for accurate identification. In this project techniques have been developed to examine the chemical interaction of pigments in oil paintings using the ESEM. The ultimate aim is to investigate these aging and degradation processes in situ under accelerated conditions using the controlled gas phase and temperature capabilities of this instrument. The ESEM also allows direct observation of the effects of sudden and slow changes in the relative humidity as well as the exposure to UV radiation on paint layers under controlled conditions. Other complementary techniques have been used to both characterise the pigments and linseed oils used in this work and to examine the chemical interactions in constructed paint layers. XRD has been used to characterise the dry pigments used in 19th and early 20th century oil paintings and GC-MS was used to characterize a range of linseed oils. Differential Scanning Calorimetry and Thermogravimetry have been used to study the drying kinetics of all the linseed oils used in this work on their own and in combination with pigments to establish the optimum conditions for ESEM analysis. Paint layers have been constructed using similar materials and methods as were used by oil painters in the 19th and early 20th centuries. Dry inorganic pigments of the type used in that era were obtained from an art supplier and chemical suppliers. Each pigment was ground in three types of linseed oil using the traditional muller and glass plate. These were applied in layers to glass slides to avoid influence from ground media or canvas and allowed to dry in the air and in an oven. Pigments that were known to interact strongly were placed in paint layers in direct contact with one another to encourage chemical interaction between the various pigments. In

  11. Thermal characterization of intumescent fire retardant paints

    International Nuclear Information System (INIS)

    Calabrese, L; Bozzoli, F; Rainieri, S; Pagliarini, G; Bochicchio, G; Tessadri, B

    2014-01-01

    Intumescent coatings are now the dominant passive fire protection materials used in industrial and commercial buildings. The coatings, which usually are composed of inorganic components contained in a polymer matrix, are inert at low temperatures and at higher temperatures, they expand and degrade to provide a charred layer of low conductivity materials. The charred layer, which acts as thermal barrier, will prevent heat transfer to underlying substrate. The thermal properties of intumescent paints are often unknown and difficult to be estimated since they vary significantly during the expansion process; for this reason the fire resistance validation of a commercial coatings is based on expensive, large-scale methods where each commercial coating-beam configuration has to be tested one by one. Adopting, instead, approaches based on a thermal modelling of the intumescent paint coating could provide an helpful tool to make easier the test procedure and to support the design of fire resistant structures as well. The present investigation is focused on the assessment of a methodology intended to the restoration of the equivalent thermal conductivity of the intumescent layer produced under the action of a cone calorimetric apparatus. The estimation procedure is based on the inverse heat conduction problem approach, where the temperature values measured at some locations inside the layer during the expansion process are used as input known data. The results point out that the equivalent thermal conductivity reached by the intumescent material at the end of the expansion process significantly depends on the temperature while the initial thickness of the paint does not seem to have much effect

  12. Thermal characterization of intumescent fire retardant paints

    Science.gov (United States)

    Calabrese, L.; Bozzoli, F.; Bochicchio, G.; Tessadri, B.; Rainieri, S.; Pagliarini, G.

    2014-11-01

    Intumescent coatings are now the dominant passive fire protection materials used in industrial and commercial buildings. The coatings, which usually are composed of inorganic components contained in a polymer matrix, are inert at low temperatures and at higher temperatures, they expand and degrade to provide a charred layer of low conductivity materials. The charred layer, which acts as thermal barrier, will prevent heat transfer to underlying substrate. The thermal properties of intumescent paints are often unknown and difficult to be estimated since they vary significantly during the expansion process; for this reason the fire resistance validation of a commercial coatings is based on expensive, large-scale methods where each commercial coating-beam configuration has to be tested one by one. Adopting, instead, approaches based on a thermal modelling of the intumescent paint coating could provide an helpful tool to make easier the test procedure and to support the design of fire resistant structures as well. The present investigation is focused on the assessment of a methodology intended to the restoration of the equivalent thermal conductivity of the intumescent layer produced under the action of a cone calorimetric apparatus. The estimation procedure is based on the inverse heat conduction problem approach, where the temperature values measured at some locations inside the layer during the expansion process are used as input known data. The results point out that the equivalent thermal conductivity reached by the intumescent material at the end of the expansion process significantly depends on the temperature while the initial thickness of the paint does not seem to have much effect.

  13. New approaches for investigating paintings by ion beam techniques

    International Nuclear Information System (INIS)

    Beck, L.; Viguerie, L. de; Walter, Ph.; Pichon, L.; Gutierrez, P.C.; Salomon, J.; Menu, M.; Sorieul, S.

    2010-01-01

    Up to now, among the IBA techniques, only PIXE has been used for analyzing paintings. However, quantitative PIXE analysis is sometimes difficult to interpret due to the layered structure, the presence of varnish and organic binder and, in some cases, discoloration of the pigments has been observed due to the interaction of the ion beam with the compounds. In order to improve the characterization of paintings, we propose some alternative experimental procedures. First of all, backscattering spectrometry (BS) and PIXE are simultaneously combined in order to collect complementary information such as layer thickness and organic compound quantification. The simultaneous PIXE and BS experiments also have the advantage of being able to analyze the same area in one experiment. This combination, implemented with an external beam, was directly applied on paintings and on painting cross-sections for the study of Italian Renaissance masterpieces. We have obtained valuable results not only on the pigment itself but also, for the first time, on the binder to pigment proportion which is not well documented in the ancient recipes. Moreover, in order to restrain beam damages due to the ion stopping power, we propose to analyze very thin painting cross-sections by a combination of PIXE-RBS and Scanning Transmission Ion Microscopy (STIM).

  14. Experiments on moisture form of concrete and adhesion of paints

    International Nuclear Information System (INIS)

    Kita, Daizo; Sumino, Masahiro

    1975-01-01

    It is necessary for radiation-resisting paints to adhere tightly to concrete in order to exhibit superior effects. As adhesion of paints to concrete is greatly affected by moisture content of concrete, this content is checked severely in the field. However, it may be considered that adhesion will be affected by the form of the moisture in the concrete also. Therefore, experiments were conducted with mortar to investigate the interrelations between pF-moisture content, moisture form and adhesion of paint. The following results were obtained: 1) Adhesion of paint becomes stronger as moisture content falls. 2) Adhesion strength of paint rises sharply until moisture content falls to a pF-value of 5.5 after which the strength is increased gradually until moisture content reaches pF of 7.0. 3) The pF-moisture content of 5.5 varies greatly depending on the mix proportions of mortar, but the form of moisture in such cases remains fixed and unchanged. (auth.)

  15. New approaches for investigating paintings by ion beam techniques

    Science.gov (United States)

    Beck, L.; de Viguerie, L.; Walter, Ph.; Pichon, L.; Gutiérrez, P. C.; Salomon, J.; Menu, M.; Sorieul, S.

    2010-06-01

    Up to now, among the IBA techniques, only PIXE has been used for analyzing paintings. However, quantitative PIXE analysis is sometimes difficult to interpret due to the layered structure, the presence of varnish and organic binder and, in some cases, discoloration of the pigments has been observed due to the interaction of the ion beam with the compounds. In order to improve the characterization of paintings, we propose some alternative experimental procedures. First of all, backscattering spectrometry (BS) and PIXE are simultaneously combined in order to collect complementary information such as layer thickness and organic compound quantification. The simultaneous PIXE and BS experiments also have the advantage of being able to analyze the same area in one experiment. This combination, implemented with an external beam, was directly applied on paintings and on painting cross-sections for the study of Italian Renaissance masterpieces. We have obtained valuable results not only on the pigment itself but also, for the first time, on the binder to pigment proportion which is not well documented in the ancient recipes. Moreover, in order to restrain beam damages due to the ion stopping power, we propose to analyze very thin painting cross-sections by a combination of PIXE-RBS and Scanning Transmission Ion Microscopy (STIM).

  16. New approaches for investigating paintings by ion beam techniques

    Energy Technology Data Exchange (ETDEWEB)

    Beck, L., E-mail: Lucile.beck@cea.f [Centre de Recherche et de Restauration des Musees de France (C2RMF), CNRS-UMR 171, Palais du Louvre - Porte des Lions, 14 quai Francois Mitterrand, 75001 Paris (France); Viguerie, L. de; Walter, Ph.; Pichon, L. [Centre de Recherche et de Restauration des Musees de France (C2RMF), CNRS-UMR 171, Palais du Louvre - Porte des Lions, 14 quai Francois Mitterrand, 75001 Paris (France); Gutierrez, P.C. [Centro de Micro-Analisis de Materiales (CMAM), Universidad Autonoma de Madrid, Campus de Cantoblanco, E-28049 Madrid (Spain); Salomon, J.; Menu, M. [Centre de Recherche et de Restauration des Musees de France (C2RMF), CNRS-UMR 171, Palais du Louvre - Porte des Lions, 14 quai Francois Mitterrand, 75001 Paris (France); Sorieul, S. [Centre d' Etudes Nucleaires de Bordeaux-Gradignan, IN2P3, UMR 5797, Universite de Bordeaux 1, Chemin du Solarium BP120, 33175 Gradignan Cedex (France)

    2010-06-15

    Up to now, among the IBA techniques, only PIXE has been used for analyzing paintings. However, quantitative PIXE analysis is sometimes difficult to interpret due to the layered structure, the presence of varnish and organic binder and, in some cases, discoloration of the pigments has been observed due to the interaction of the ion beam with the compounds. In order to improve the characterization of paintings, we propose some alternative experimental procedures. First of all, backscattering spectrometry (BS) and PIXE are simultaneously combined in order to collect complementary information such as layer thickness and organic compound quantification. The simultaneous PIXE and BS experiments also have the advantage of being able to analyze the same area in one experiment. This combination, implemented with an external beam, was directly applied on paintings and on painting cross-sections for the study of Italian Renaissance masterpieces. We have obtained valuable results not only on the pigment itself but also, for the first time, on the binder to pigment proportion which is not well documented in the ancient recipes. Moreover, in order to restrain beam damages due to the ion stopping power, we propose to analyze very thin painting cross-sections by a combination of PIXE-RBS and Scanning Transmission Ion Microscopy (STIM).

  17. Automatic forensic analysis of automotive paints using optical microscopy.

    Science.gov (United States)

    Thoonen, Guy; Nys, Bart; Vander Haeghen, Yves; De Roy, Gilbert; Scheunders, Paul

    2016-02-01

    The timely identification of vehicles involved in an accident, such as a hit-and-run situation, bears great importance in forensics. To this end, procedures have been defined for analyzing car paint samples that combine techniques such as visual analysis and Fourier transform infrared spectroscopy. This work proposes a new methodology in order to automate the visual analysis using image retrieval. Specifically, color and texture information is extracted from a microscopic image of a recovered paint sample, and this information is then compared with the same features for a database of paint types, resulting in a shortlist of candidate paints. In order to demonstrate the operation of the methodology, a test database has been set up and two retrieval experiments have been performed. The first experiment quantifies the performance of the procedure for retrieving exact matches, while the second experiment emulates the real-life situation of paint samples that experience changes in color and texture over time. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  18. Cyclic voltammetry and RBS study of paint components

    International Nuclear Information System (INIS)

    Bowman, Lynn; Spencer, Dirk; Muntele, Claudiu; Muntele, Iulia; Ila, D.

    2007-01-01

    Heavy metals and metalloid ions are found in environmental matrices. The most toxic are lead, cadmium and mercury. These three heavy metals have no biological function and are toxic at all concentrations. Lead is one of the most insidious heavy metals and is introduced into the environment by many different means. It persists in both urban and rural settings, being found in paint chips, pottery, crystal and pharmaceutical and nutritional products. The analysis of heavy elements such as lead in soil is of particular importance [W.T. Sturges, R.M. Harrison, Sci. Total Environ. 44 (3) (1985) 225; M.L. Lepow, L. Bruckman, M. Gillette, S. Markowitz, R. Robino, J. Kapish, Environ. Res. 10 (3) (1975) 415; A.E. Daniels, J.R. Kominsky, P.J. Clark, J. Hazard. Mater. B 87 (2001) 117; G. Hutter, D. Moshman, J. Hazard. Mater. 40 (1995) 1]. In preparing the methods for lead detection in paint, we have used Rutherford backscattering spectrometry (RBS) in order to study the type and amount of heavy metal content in paint samples collected at various sites in the historic campus at A and M University (AAMU). We will show the results of our study with emphasis on comparison of what we learned about presence of lead in paints using our ion beam methods compared with the analysis of lead in paints using cyclic voltammetry

  19. Results of expert response when forming an exhaustive list of potential risks of constructions projects using energy efficient technologies

    Directory of Open Access Journals (Sweden)

    Ryzhkova Anastasiya Igorevna

    2016-10-01

    Full Text Available The author deals with the most widely used methods of risk events identification. The expert response method is most applicable for construction projects using energy efficient technologies. The article presents the results of an opinion poll of the professional expert community using expert response method, which is aimed to identify the most likely potential “pure” risk of construction projects with energy-efficient technologies in use. 74 experts representing different levels of the construction process were polled: customers and directors of construction companies, project managers, risk managers, advisors. The answers were collected during private talks and also using a special website Survey Monkey. Experts from different countries took part: Russia, Great Britain, Austria, Luxemburg, Switzerland and Norway. Also the article presents the expert evaluation of the “effect” of risk implementation on the cost of a project, implementation time, the product quality, the environment and safety on the construction site.

  20. Painting with light

    DEFF Research Database (Denmark)

    Jensen, Niels Henrik

    The paper describes a method, where Photoshop are used for balancing the different light sources of a rendered CAD-model. The method shortens the work process considerably, and makes it easier to obtain a result of a high quality.......The paper describes a method, where Photoshop are used for balancing the different light sources of a rendered CAD-model. The method shortens the work process considerably, and makes it easier to obtain a result of a high quality....

  1. Use of oil shale ash in road construction: results of follow-up environmental monitoring.

    Science.gov (United States)

    Reinik, Janek; Irha, Natalya; Koroljova, Arina; Meriste, Tõnis

    2018-01-05

    Oil shale ash (OSA) was used for road construction in a pristine swamp area in East-Estonia during 2013-2014. OSA was used as a binder both in mass stabilization of soft peat soil and in the upper layer. Use of OSA in civil engineering always raises questions about the environmental safety of such activities. Post-construction environmental monitoring of the pilot section was carried out in 2014 and 2015. The monitoring program involved surface water and soil sampling campaigns. Samples were analyzed for selected constituents and parameters of environmental concern. The paper gives data for assessing the environmental impact and evaluation of potential risks associated with construction of roads using OSA. Leaching of hazardous compounds from the pilot section to surrounding aqueous environment was not observed during the monitoring program. Still, the road construction affected the concentration of sulfates in surrounding surface water. Also, the water-soluble content of barium in surface water correlated significantly with the concentrations of chloride and sulfate ion and electric conductivity of the surface water. Therefore, it is recommended to monitor the electric conductivity, concentrations of sulfates, chlorides, and barium in nearby surface water when OSA is used in road construction.

  2. Construction of nonsingular pre-big-bang and ekpyrotic cosmologies and the resulting density perturbations

    International Nuclear Information System (INIS)

    Tsujikawa, Shinji; Brandenberger, Robert; Finelli, Fabio

    2002-01-01

    We consider the construction of nonsingular pre-big-bang and ekpyrotic type cosmological models realized by the addition to the action of specific higher-order terms stemming from quantum corrections. We study models involving general relativity coupled to a single scalar field with a potential motivated by the ekpyrotic scenario. We find that the inclusion of the string loop and quantum correction terms in the string frame makes it possible to obtain solutions of the variational equations which are nonsingular and bouncing in the Einstein frame, even when a negative exponential potential is present, as is the case in the ekpyrotic scenario. This allows us to discuss the evolution of cosmological perturbations without the need to invoke matching conditions between two Einstein universes, one representing the contracting branch, the second the expanding branch. We analyze the spectra of perturbations produced during the bouncing phase and find that the spectrum of curvature fluctuations in the model proposed originally to implement the ekpyrotic scenario has a large blue tilt (n R =3). Except for instabilities introduced on small scales, the result agrees with what is obtained by imposing continuity of the induced metric and of the extrinsic curvature across a constant scalar field (up to k 2 corrections equal to the constant energy density) matching surface between the contracting and the expanding Einstein universes. We also discuss nonsingular cosmological solutions obtained when a Gauss-Bonnet term with a coefficient suitably dependent on the scalar matter field is added to the action in the Einstein frame with a potential for the scalar field present. In this scenario, nonsingular solutions are found which start in an asymptotically flat state, undergo a period of superexponential inflation, and end with a graceful exit. The spectrum of fluctuations is also calculated in this case

  3. On the study of oil paint adhesion on optically transparent glass: Conservation of reverse paintings on glass

    International Nuclear Information System (INIS)

    Bayle, M.; Waugh, D.G.; Colston, B.J.; Lawrence, J.

    2015-01-01

    Highlights: • Adhesion characteristics analysed with respect to reverse paintings on glass. • Physical properties of surfaces and pigments found to affect cohesion and adhesion. • Environmental effects on pigment adhesion to glass have been documented. • Vermillion pigment hardest compared to other pigments, especially with adhesives. • Wettability used to assess adhesion properties relating to reverse paintings on glass. - Abstract: Reverse painting on glass is a technique which consists of applying a cold paint layer on the reverse-side of glass. The main challenge facing these artworks is the fragile adhesion of the pictorial layer – a simple movement can modify the appearance of the painting. This paper details a study into the adhesion parameters of pigments on glass and the comparison between different pigments. The relationships between the binder (linseed oil) with pigments and the glass with or without the use of an adhesive are studied. Physical analyses by surface characterisation have been carried out to better understand the influence of the pigment. The use of a sessile drop device, optical microscopy, scanning electron microscopy (SEM), a surface 3D profiler and a pencil hardness scratch tester were necessary to establish a comparison of the pictorial layer adhesion. A comparison of the effect of two adhesives, namely ox gall and gum arabic, has shown that the adhesion is not only linked to the physical parameters but that possible chemical reactions can influence the results. Finally, a treatment based on humidity-extreme storage has shown the weakness of some pictorial layers.

  4. On the study of oil paint adhesion on optically transparent glass: Conservation of reverse paintings on glass

    Energy Technology Data Exchange (ETDEWEB)

    Bayle, M. [Historic and Ancient Materials Group, School of Chemistry, University of Lincoln, Brayford Pool, Lincoln LN6 7TS (United Kingdom); Waugh, D.G., E-mail: d.waugh@chester.ac.uk [Laser Engineering and Manufacturing Research Centre, Faculty of Science and Engineering, University of Chester, Thornton Science Park, Ince, Chester CH2 4NU (United Kingdom); Colston, B.J. [Historic and Ancient Materials Group, School of Chemistry, University of Lincoln, Brayford Pool, Lincoln LN6 7TS (United Kingdom); Lawrence, J. [Laser Engineering and Manufacturing Research Centre, Faculty of Science and Engineering, University of Chester, Thornton Science Park, Ince, Chester CH2 4NU (United Kingdom)

    2015-12-01

    Highlights: • Adhesion characteristics analysed with respect to reverse paintings on glass. • Physical properties of surfaces and pigments found to affect cohesion and adhesion. • Environmental effects on pigment adhesion to glass have been documented. • Vermillion pigment hardest compared to other pigments, especially with adhesives. • Wettability used to assess adhesion properties relating to reverse paintings on glass. - Abstract: Reverse painting on glass is a technique which consists of applying a cold paint layer on the reverse-side of glass. The main challenge facing these artworks is the fragile adhesion of the pictorial layer – a simple movement can modify the appearance of the painting. This paper details a study into the adhesion parameters of pigments on glass and the comparison between different pigments. The relationships between the binder (linseed oil) with pigments and the glass with or without the use of an adhesive are studied. Physical analyses by surface characterisation have been carried out to better understand the influence of the pigment. The use of a sessile drop device, optical microscopy, scanning electron microscopy (SEM), a surface 3D profiler and a pencil hardness scratch tester were necessary to establish a comparison of the pictorial layer adhesion. A comparison of the effect of two adhesives, namely ox gall and gum arabic, has shown that the adhesion is not only linked to the physical parameters but that possible chemical reactions can influence the results. Finally, a treatment based on humidity-extreme storage has shown the weakness of some pictorial layers.

  5. Analytical Study of High Concentration PCB Paint at the Heavy Water Components Test Reactor

    International Nuclear Information System (INIS)

    Lowry, N.J.

    1998-01-01

    This report provides results of an analytical study of high concentration PCB paint in a shutdown nuclear test reactor located at the US Department of Energy's Savannah River Site (SRS). The study was designed to obtain data relevant for an evaluation of potential hazards associated with the use of and exposure to such paints

  6. Analytical Study of High Concentration PCB Paint at the Heavy Water Components Test Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, N.J.

    1998-10-21

    This report provides results of an analytical study of high concentration PCB paint in a shutdown nuclear test reactor located at the US Department of Energy's Savannah River Site (SRS). The study was designed to obtain data relevant for an evaluation of potential hazards associated with the use of and exposure to such paints.

  7. Toward zero waste production in the paint industry | Jewell | Water SA

    African Journals Online (AJOL)

    Wastewater is generated in the batch production process of water-based paints when vessels and filling lines are washed between batches. This results in a diluted paint wash water stream. The wash water is currently treated in a flocculation process using ferric chloride as a coagulant. An opportunity was identified for ...

  8. Differential PIXE for investigating the layer structure of paintings

    Science.gov (United States)

    Mandò, P. A.; Fedi, M. E.; Grassi, N.; Migliori, A.

    2005-09-01

    This paper reports an example of how the differential PIXE technique can be successfully applied to the investigation of wood or canvas paintings. The work analysed is a famous wood painting by Leonardo da Vinci, the "Madonna dei fusi" (ex-Reford version, 1501), chosen for a pilot study in a wide international project aimed at analysing Leonardo's works of art by means of non-destructive techniques. While illustrating the results obtained concerning the identification of pigments and the discrimination of the stratigraphy of layers, the merits and limits of differential PIXE in general are pointed out.

  9. Differential PIXE for investigating the layer structure of paintings

    International Nuclear Information System (INIS)

    Mando, P.A.; Fedi, M.E.; Grassi, N.; Migliori, A.

    2005-01-01

    This paper reports an example of how the differential PIXE technique can be successfully applied to the investigation of wood or canvas paintings. The work analysed is a famous wood painting by Leonardo da Vinci, the 'Madonna dei fusi' (ex-Reford version, 1501), chosen for a pilot study in a wide international project aimed at analysing Leonardo's works of art by means of non-destructive techniques. While illustrating the results obtained concerning the identification of pigments and the discrimination of the stratigraphy of layers, the merits and limits of differential PIXE in general are pointed out

  10. Paint Scaler. Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    None

    2000-01-01

    The Paint Scaler can collect paint samples quickly and efficiently for lab analysis. The Rotary Hammer Drill is a 24-V battery operated, 3/4-in. rotary hammer drill. When used with an optional chipping adapter, the Bosch Rotary Hammer Drill can be used to perform chipping and chiseling tasks such as paint removal from either concrete or metal surfaces. It is ultra-compact, lightweight with an ergonomic balanced grip. The battery operation gives the operator more flexibility during sampling activities

  11. Augmenting painted architectures for communicating cultural heritage

    Directory of Open Access Journals (Sweden)

    Alberto Sdegno

    2015-07-01

    Full Text Available The paper presents a research under development at the University of Trieste to analyze a painted architecture by Paolo Veronese and to present the results using AR systems (Augmented Reality Systems. The canvas was painted in 1573 and it is now at the Gallerie dell’Accademia Museum in Venice. The aim of the research was to transform a two-dimensional work of art in a three dimensional one, allowing all the visitors of a museum to enter the space of the representation and perceive it in a more direct way. After the geometrical analysis of the picture, we started the digital restitution of the perspective references and proceed to model the virtual scene using Boolean primitives and applying all the textures to render the scene in a very realistic way. The further step was to convert the model into a dynamic form with AR algorithms and associate it with spatial references to allow users to do a virtual experience of it.

  12. Colour dematerialization in spiritual literature and painting

    Directory of Open Access Journals (Sweden)

    Dadang Sudrajat

    2017-12-01

    Full Text Available Colour in variety of art expression can be interpreted differently. This study is aiming at analyzing the colour dematerialization of Javanese spiritual literature “Falsafah Jeroning Warna” by Suprapto Kadis and a painting by Ahmad Sadali entitled “Gunung Mas”. Research was done by employing qualitative research, while data was collected by observation, interview, discussion, and documentation study. The analysis of meanings in the two art works was done in descriptive way by using the theory and the knowledge of tasawwuf or sufism, the aesthetics, and arts. Results showed that both sufis, Ahmad Sadali and Suprapto Kadis, share similarities in doing dematerialization towards colour. For them, colour was initially taken from nature (the external territory which then experienced dematerialization when it made contact with inspiration that was created from the internal area (mental. On the other hand, the difference between the two art works lies on an understanding that colour in FJW is naturalistic mimesis in nature, meanwhile, the painting of Ahmad Sadali is naturaly abstract.

  13. Microanalysis of paint layers in polychrome sculptures

    International Nuclear Information System (INIS)

    Mendoza, A.; Falcucci, C.; Jaksic, M.

    2001-01-01

    Cross sections paint layers of polychromes sculpture of the 16 century, located at the City Museum of Havana and currently in the restoration process, have been analyzed by capillary based μXRF , μPIXE , SEM -EDX and light microscopy. Experimental parameters (geometry measurement time) of the capillary based μXRF set up (nominal end diameter equal to 10 μm) were optimized to achieve the resolution required for meaningful scintigraphic studies of the art and archaeological objects, Cumulative x-rays spectra for each layer were obtained in order to perform semi-quantitative analysis. The employed pigments were identified by the characteristics elements and the elemental maps precisely reproduced photographs obtained by means of light microscopy. In the case of nuclear microprobe, RBS for Stoichiometry analysis of paint layers was also performed. additional information on the organic materials was also obtained by chemical analysis. Complementary results obtained by using the analytical techniques are presented and discussed from the point of view of the restoration processes

  14. Characterization of chemical agent transport in paints.

    Science.gov (United States)

    Willis, Matthew P; Gordon, Wesley; Lalain, Teri; Mantooth, Brent

    2013-09-15

    A combination of vacuum-based vapor emission measurements with a mass transport model was employed to determine the interaction of chemical warfare agents with various materials, including transport parameters of agents in paints. Accurate determination of mass transport parameters enables the simulation of the chemical agent distribution in a material for decontaminant performance modeling. The evaluation was performed with the chemical warfare agents bis(2-chloroethyl) sulfide (distilled mustard, known as the chemical warfare blister agent HD) and O-ethyl S-[2-(diisopropylamino)ethyl] methylphosphonothioate (VX), an organophosphate nerve agent, deposited on to two different types of polyurethane paint coatings. The results demonstrated alignment between the experimentally measured vapor emission flux and the predicted vapor flux. Mass transport modeling demonstrated rapid transport of VX into the coatings; VX penetrated through the aliphatic polyurethane-based coating (100 μm) within approximately 107 min. By comparison, while HD was more soluble in the coatings, the penetration depth in the coatings was approximately 2× lower than VX. Applications of mass transport parameters include the ability to predict agent uptake, and subsequent long-term vapor emission or contact transfer where the agent could present exposure risks. Additionally, these parameters and model enable the ability to perform decontamination modeling to predict how decontaminants remove agent from these materials. Published by Elsevier B.V.

  15. The colors of paintings and viewers' preferences.

    Science.gov (United States)

    Nascimento, Sérgio M C; Linhares, João M M; Montagner, Cristina; João, Catarina A R; Amano, Kinjiro; Alfaro, Catarina; Bailão, Ana

    2017-01-01

    One hypothesis to explain the aesthetics of paintings is that it depends on the extent to which they mimic natural image statistics. In fact, paintings and natural scenes share several statistical image regularities but the colors of paintings seem generally more biased towards red than natural scenes. Is the particular option for colors in each painting, even if less naturalistic, critical for perceived beauty? Here we show that it is. In the experiments, 50 naïve observers, unfamiliar with the 10 paintings tested, could rotate the color gamut of the paintings and select the one producing the best subjective impression. The distributions of angles obtained are described by normal distributions with maxima deviating, on average, only 7 degrees from the original gamut orientation and full width at half maximum just above the threshold to perceive a chromatic change in the paintings. Crucially, for data pooled across observers and abstract paintings the maximum of the distribution was at zero degrees, i.e., the same as the original. This demonstrates that artists know what chromatic compositions match viewers' preferences and that the option for less naturalistic colors does not constrain the aesthetic value of paintings. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Studies on the temperature distribution of steel plates with different paints under solar radiation

    International Nuclear Information System (INIS)

    Liu, Hongbo; Chen, Zhihua; Chen, Binbin; Xiao, Xiao; Wang, Xiaodun

    2014-01-01

    Thermal effects on steel structures exposed to solar radiation are significant and complicated. Furthermore, the solar radiation absorption coefficient of steel surface with different paintings is the main factor affecting the non-uniform temperature of spatial structures under solar radiation. In this paper, nearly two hundreds steel specimens with different paintings were designed and measured to obtain their solar radiation absorption coefficients using spectrophotometer. Based on the test results, the effect of surface color, painting type, painting thickness on the solar radiation absorption coefficient was analyzed. The actual temperatures under solar radiation for all specimens were also measured in summer not only to verify the absorption coefficient but also provide insight for the temperature distribution of steel structures with different paintings. A numerical simulation and simplified formula were also conducted and verified by test, in order to study the temperature distribution of steel plates with different paints under solar radiation. The results have given an important reference in the future research of thermal effect of steel structures exposed to solar radiation. - Highlights: • Solar radiation absorptions for steel with different paintings were measured. • The temperatures of all specimens under solar radiation were measured. • The effect of color, thickness and painting type on solar absorption was analyzed. • A numerical analysis was conducted and verified by test data. • A simplified formula was deduced and verified by test data

  17. Automated full-3D digitization system for documentation of paintings

    Science.gov (United States)

    Karaszewski, Maciej; Adamczyk, Marcin; Sitnik, Robert; Michoński, Jakub; Załuski, Wojciech; Bunsch, Eryk; Bolewicki, Paweł

    2013-05-01

    In this paper, a fully automated 3D digitization system for documentation of paintings is presented. It consists of a specially designed frame system for secure fixing of painting, a custom designed, structured light-based, high-resolution measurement head with no IR and UV emission. This device is automatically positioned in two axes (parallel to the surface of digitized painting) with additional manual positioning in third, perpendicular axis. Manual change of observation angle is also possible around two axes to re-measure even partially shadowed areas. The whole system is built in a way which provides full protection of digitized object (moving elements cannot reach its vicinity) and is driven by computer-controlled, highly precise servomechanisms. It can be used for automatic (without any user attention) and fast measurement of the paintings with some limitation to their properties: maximum size of the picture is 2000mm x 2000mm (with deviation of flatness smaller than 20mm) Measurement head is automatically calibrated by the system and its possible working volume starts from 50mm x 50mm x 20mm (10000 points per square mm) and ends at 120mm x 80mm x 60mm (2500 points per square mm). The directional measurements obtained with this system are automatically initially aligned due to the measurement head's position coordinates known from servomechanisms. After the whole painting is digitized, the measurements are fine-aligned with color-based ICP algorithm to remove any influence of possible inaccuracy of positioning devices. We present exemplary digitization results along with the discussion about the opportunities of analysis which appear for such high-resolution, 3D computer models of paintings.

  18. Analysis of fresco paintings by X-ray fluorescence method

    International Nuclear Information System (INIS)

    Cechak, T.; Gerndt, J.; Musilek, L.; Kopecka, I.

    2000-01-01

    In this work we present the application of X-ray fluorescence analysis (XRFA) to examine fresco paintings from the Karlstejn castle. The X-ray fluorescence apparatus built and operated in the Laboratory of Quantitative Methods in Research of Ancient Monuments was used for the purpose of fresco paintings measurements. The X-ray sources (radionuclides) generate the characteristic X-ray photons from the sample. The Si(Li) detector measures numbers and energies of photons emitted from the specimen. The energy and number of photons detected can be converted into kind and amount of measured atoms. These results give data for qualitative and quantitative analysis of samples. XRFA is relatively simple and non-destructive method. Capability of in-situ measurement is one of big advantages of this method. The radionuclide sources of exciting radiation (e.g. 55 Fe enables the excitation of elements with Z up to 23, 238 Pu is used in interval of Z from 20 to 39 etc.) were used. An Si(Li) semiconductor detector with a 5 l Dewar vessel and portable spectroscopy system enable the in situ measurement. Narrow collimation of the exciting beam makes it possible to select the measured area of fresco painting. The valuable fresco paintings from the Karlstejn castle were investigated in this way. The measurements were carried out in collaboration with the Analytical Laboratory of the State Institute for the Preservation of Historic Monuments. A suitable analysis of paintings makes it possible to detect the kind of colours and evaluate changes in the surface colour of paintings and suggest useful and timely procedures for their conservation and restoration. (author)

  19. Onoufrios, the famous XVI's century iconographer, creator of the ``Berati School'': studying the technique and materials used in wall paintings of inscribed churches

    Science.gov (United States)

    Pavlidou, E.; Arapi, M.; Zorba, T.; Anastasiou, M.; Civici, N.; Stamati, F.; Paraskevopoulos, K. M.

    2006-06-01

    The study of the materials and techniques employed for wall painting, complementing the information from historical and aesthetic data, contributes to the integrated knowledge of the iconographer and his period. In the 16th century, regarding the iconography in the former Byzantine area, besides the School of Crete and Francos Catelanos and his school, a third artistic personality who also created his own school, Onoufrios, appeared in central Albania and expanded his activity as a painter to northern Greece as well as nearby areas, such as Ohrid. Inscriptions documenting the works of Onoufrios are found in some of the churches that he decorated with wall paintings: “St. Apostles” (1547) Kastoria Greece, “St. Nicolas” Shelcan Albania, “St. Paraskevi” (1554), Valsh Albania, while are attributed to him the church of “St. Theodores” in Berati, Albania (before 1547) and others. He is one of the best icon painters of the whole Balkan region, and the best painter that has ever worked in Albanian territory. Onoufrios managed to combine the local painting tradition with the best tradition of the eastern (Paleologian) and western (Italian) schools, resulting in a realistic and natural depiction. He is the creator of the “Berati School” that expanded to other parts of the peninsula. His individual character can be distinguished in the work of his students: his son Nikolaos (who inherited his style in painting), Onoufrios from Cyprus, etc. Based on careful observations, we extracted number of paint samples from wall paintings of three of the above mentioned churches. Ground and paint layers were examined using micro-FTIR, Optical Microscopy, TXRF and SEM-EDS, to characterize materials and methods used by the artist to create these works. Our findings in each church are discussed and compared with the others in order to understand how and with what material and resources the painter worked and how he developed his technique. The presence of calcium

  20. Conceptual Design and Feasibility Analyses of a Robotic System for Automated Exterior Wall Painting

    Directory of Open Access Journals (Sweden)

    Young S. Kim

    2008-11-01

    Full Text Available There are approximately 6,677,000 apartment housing units in South Korea. Exterior wall painting for such multi-dwelling apartment housings in South Korea represents a typical area to which construction automation technology can be applied for improvement in safety, productivity, quality, and cost over the conventional method. The conventional exterior wall painting is costly and labor-intensive, and it especially exposes workers to significant health and safety risks. The primary objective of this study is to design a conceptual model of an exterior wall painting robot which is applicable to apartment housing construction and maintenance, and to conduct its technical?economical feasibility analyses. In this study, a design concept using a high ladder truck is proposed as the best alternative for automation of the exterior wall painting. Conclusions made in this study show that the proposed exterior wall painting robot is technically and economically feasible, and can greatly enhance safety, productivity, and quality compared to the conventional method. Finally, it is expected that the conceptual model of the exterior wall painting robot would be efficiently used in various applications in exterior wall finishing and maintenance of other architectural and civil structures such as commercial buildings, towers, and high-rise storage tanks.

  1. FIRE-RESISTANT SHIELDING COATING BASED ON SHUNGITE-CONTAINING PAINT

    Directory of Open Access Journals (Sweden)

    BELOUSOVA Elena Sergeevna

    2013-08-01

    Full Text Available Today when specific shielded facilities are designed the construction materials and shields should meet a range of fire safety requirements. A composite coating on the basis of a water-based fire-resistant paint filled with shungite nanopowder can be applied onto walls, floors, ceilings and other surfaces in the shielded areas to reduce electromagnetic radiation and simultaneously to ensure fire safety. Shungit is a mineral with multilayer carbon fullerene globules which diameter is 10–30 nm. Due to the high conductivity shungite is able to weaken electromagnetic radiation. A coating made of schungite-containing paint on a cellulose substrate was subjected to the open flame under the temperature of 1700° C for 3 minutes and 40 seconds. That resulted in the formation of insulating foam layer without mechanical damage of the substrate. The XRD diffraction analysis of the powder obtained in the process of flame influence on the coating showed the formation of the such substances as orthoclase, barite, rutile, etc. Carbon contained in shungit and used as a filler for the fireproof paint wasn’t detected. This fact indicates carbon oxidation as the result of its burning out. The shielding efficiency of the composite coating after open flame exposure was measured for the frequency range 8…12 GHz with the use of the panoramic attenuation meter and voltage standing wave ratio meter YA2R-67-61 with a sweep generator and waveguides. After that the reflection and transmission coefficients were calculated. The results of measurements and calculations showed decrease of the reflection and transmission coefficients due to conductivity decrease and dielectric losses changes of the composite coating provided by silica content increase and carbon percentage decrease.

  2. Paint stripping with high power flattened Gaussian beams

    CSIR Research Space (South Africa)

    Forbes, A

    2009-08-01

    Full Text Available In this paper the researchers present results on improved paint stripping performance with an intra-cavity generated Flattened Gaussian Beam (FGB). A resonator with suitable diffractive optical elements was designed in order to produce a single mode...

  3. Allergic Contact Dermatitis From Methylisothiazolinone in Residential Wall Paint.

    Science.gov (United States)

    Goodier, Molly C; Ljungberg, Linda; Persson, Christina; Engfeldt, Malin; Bruze, Magnus; Warshaw, Erin M

    A 33-year-old woman presented to our clinic for suspected photoallergic contact dermatitis with a recent episode of severe, vesicular dermatitis involving exposed skin and correlating with relocation to a new home. Biopsy results showed spongiotic and lichenoid dermatitis with eosinophils. Patch test results showed a very strong (+++) reaction to methylisothiazolinone (MI), mild (+) reaction to MI/methylchloroisothiazolinone, and no reaction to benzisothiazolinone. These allergens were found in several personal products. However, the patient was suspicious of 4 wall paints recently used in her home. Semiopen patch tests to 3 Behr interior paints showed positive results. Nine controls showed negative results. High-performance liquid chromatography demonstrated MI and benzisothiazolinone in all 4 paints at concentrations ranging from 50 to 100 ppm and 290 to 340 ppm, respectively. Although MI has been reported to cause occupational airborne contact dermatitis in European household painters, to our knowledge, this is the first documented case of paint-related MI allergy in the United States.

  4. Occupational exposure to airborne chemical substances in paintings conservators

    Directory of Open Access Journals (Sweden)

    Anna Jeżewska

    2014-02-01

    Full Text Available Background: This paper presents the results of the quantitative study of the airborne chemical substances detected in the conservator's work environment. Material and Methods: The quantitative tests were carried out in 6 museum easel paintings conservation studios. The air test samples were taken at various stages of restoration works, such as cleaning, doubling, impregnation, varnishing, retouching, just to name a few. The chemical substances in the sampled air were measured by the GC-FID (gas chromatography with flame ionization detector test method. Results: The study results demonstrated that concentrations of airborne substances, e.g., toluene, 1,4-dioxane, turpentine and white spirit in the work environment of paintings conservators exceeded the values allowed by hygiene standards. It was found that exposure levels to the same chemical agents, released during similar activities, varied for different paintings conservation studios. It is likely that this discrepancy resulted from the indoor air exchange system for a given studio (e.g. type of ventilation and its efficiency, the size of the object under maintenance, and also from the methodology and protection used by individual employees. Conclusions: The levels of organic solvent vapors, present in the workplace air in the course of painting conservation, were found to be well above the occupational exposure limits, thus posing a threat to the worker's health. Med Pr 2014;65(1:33–41

  5. Body painting to promote self-active learning of hand anatomy for preclinical medical students.

    Science.gov (United States)

    Jariyapong, Pitchanee; Punsawad, Chuchard; Bunratsami, Suchirat; Kongthong, Paranyu

    2016-01-01

    Background The purpose of this study was to use the body painting method to teach hand anatomy to a group of preclinical medical students. Methods Students reviewed hand anatomy using the traditional method and body painting exercise. Feedback and retention of the anatomy-related information were examined by a questionnaire and multiple-choice questions, respectively, immediately and 1 month after the painting exercise. Results Students agreed that the exercise was advantageous and helped facilitate self-active learning after in-class anatomy lessons. While there was no significant difference in knowledge retention between the control and experimental groups, the students appreciated the exercise in which they applied body paint to the human body to learn anatomy. Conclusion The body painting was an efficient tool for aiding the interactive learning of medical students and increasing the understanding of gross anatomy.

  6. Elof Risebye – A Pioneer in the Transfer of Wall Paintings on the Wrong Path

    DEFF Research Database (Denmark)

    Brajer, Isabelle Eve

    2001-01-01

    The transfer of wall paintings was introduced to Denmark by Italian restorers in 1913. A misunderstanding of this technique led to the development of a faulty method by Elof Risebye, an artist, who by chance got involved in the restoration of wall paintings. The use of the wrong adhesive resulted...... in massive damage of the paint layer. Risebye disguised his losses by overpainting, which he carried out according to his own style of painting, not at all following the style of the painter's whose work he was restoring. He also taught his students at the Fresco and Mosaic School how to detach frescoes......, thus disseminating his faulty method. Due to Risebye's activities there are a significant number of transferred wall paintings in Denmark which are in dire need of treatment today....

  7. Studies on irradiation resisting paints for concrete structures in nuclear power plant, (8)

    International Nuclear Information System (INIS)

    Kita, Daizo; Sumino, Masahiro

    1981-01-01

    It is necessary for layers of irradiation resisting paints to adhere tightly to each other in order to exhibit superior effects. It is said that such adhesion is greatly affected by the interval between painting of the layers. Further, the adhesion will be affected by dirt soiling dried undercoat surfaces. Therefore, experiments were conducted to make clear the effects of painting intervals, dirt soiling and preparation method of dried coat surfaces. The following results were obtained. (1) Adhesion between layers of paint coats was not affected very much by painting intervals. (2) Rotary disk sanders and rotary cup wire brushes were useful tools for removing dirt in preparation of dried undercoat surfaces. (3) Thinner should be added to the middle coat at a rate of dilution by the thinner of 5 to 10% in order to improve adhesion with the undercoat. (author)

  8. Treatment performances of French constructed wetlands: results from a database collected over the last 30 years.

    Science.gov (United States)

    Morvannou, A; Forquet, N; Michel, S; Troesch, S; Molle, P

    2015-01-01

    Approximately 3,500 constructed wetlands (CWs) provide raw wastewater treatment in France for small communities (Built during the past 30 years, most consist of two vertical flow constructed wetlands (VFCWs) in series (stages). Many configurations exist, with systems associated with horizontal flow filters or waste stabilization ponds, vertical flow with recirculation, partially saturated systems, etc. A database analyzed 10 years earlier on the classical French system summarized the global performances data. This paper provides a similar analysis of performance data from 415 full-scale two-stage VFCWs from an improved database expanded by monitoring data available from Irstea and the French technical department. Trends presented in the first study are confirmed, exhibiting high chemical oxygen demand (COD), total suspended solids (TSS) and total Kjeldahl nitrogen (TKN) removal rates (87%, 93% and 84%, respectively). Typical concentrations at the second-stage outlet are 74 mgCOD L(-1), 17 mgTSS L(-1) and 11 mgTKN L(-1). Pollutant removal performances are summarized in relation to the loads applied at the first treatment stage. While COD and TSS removal rates remain stable over the range of applied loads, the spreading of TKN removal rates increases as applied loads increase.

  9. A preliminary study of the composition of commercial oil, acrylic and vinyl paints and their behaviour after accelerated ageing conditions

    Directory of Open Access Journals (Sweden)

    Francesca Caterina Izzo

    2014-12-01

    Full Text Available This study is part of a research project dealing with the establishment of monitoring and damage prevention plans for contemporary artworks. For this purpose, some commercial paints, among the most currently used by young artists, were selected: Winton oil paint (Winsor & Newton, UK, Heavy Body acrylic paint (Liquitex, USA and Flashe vinyl paint (Lefranc & Bourgeois, France. The paints were subjected to different treatments of accelerated ageing, the results indicating different behaviour in relation both to the type of binders and pigments present in the different formulations. In particular, it was observed that ageing produced by ozone plays an important role in the stability of the oil paints, above all in those containing organic azo pigments. Thermal ageing, as expected, influences the stability of all the commercial paints examined, with the formation of alteration products and visible changes in the paint films. Ageing produced by moisture clearly affects the synthetic polymer-based paints, particularly evident in the changes in mass. In all cases, the accelerated ageing treatments produced chromatic variations, more evidently for the oil paints containing organic pigment.

  10. Zhang Qing and His Meticulous Chinese Paintings

    Institute of Scientific and Technical Information of China (English)

    JULIE; M.SEGRAVES

    2002-01-01

    ZHANG Qing was initially drawn to the bird and flower paint-ings of the Tang and Song dynasties (7th-12th centuries). Later,Qing Dynasty (1644-1911) artist Ren Bonian, famous for hispaintings of figures, also became an important influence.Although Zhang Qing considers his style to be firmly rooted in tradi-

  11. Factors effecting paint performance on wood siding

    Science.gov (United States)

    Christopher G. Hunt; R. Sam Williams; Mark Knaebe; Peter Sotos; Steven Lacher

    2009-01-01

    Several different studies are compared to assess the effectiveness of commercial water repellent preservatives (WRP’s) in the late 1990’s on vertical and horizontal siding. Besides WRP, variables included wood species, exposure location (Wisconsin or Mississippi), and solid color stain vs. primer + paint. Data on substrate checking and paint flaking are presented....

  12. THz reflectometric imaging of medieval wall paintings

    DEFF Research Database (Denmark)

    Dandolo, Corinna Ludovica Koch; Jepsen, Peter Uhd

    2013-01-01

    Terahertz time-domain reflectometry has been applied to the investigation of a medieval Danish wall painting. The technique has been able to detect the presence of carbonblack layer on the surface of the wall painting and a buried insertion characterized by high reflectivity values has been found...

  13. Nanoclays for polymer nanocomposites, paints, inks, greases

    Indian Academy of Sciences (India)

    ... rheological modifier for paints, inks and greases, drug delivery vehicle for controlled release of therapeutic agents, and nanoclays for industrial waste water as well as potable water treatment to make further step into green environment. A little amount of nanoclay can alter the entire properties of polymers, paints, inks and ...

  14. Roosters Rule: A Painted Paper Collage

    Science.gov (United States)

    Brady, Susan

    2011-01-01

    On perusing American collage artist Eric Carle's book, "Rooster's Off to See the World," at an annual school book fair, the author, mesmerized by the carnival of colors and collage on each page, thought "What a wonderful visual aid for a combination painting and collage unit." Her first-graders were involved in a painting unit, and knowing their…

  15. Texton-based analysis of paintings

    NARCIS (Netherlands)

    Van der Maaten, L.J.P.; Postma, E.O.

    2010-01-01

    The visual examination of paintings is traditionally performed by skilled art historians using their eyes. Recent advances in intelligent systems may support art historians in determining the authenticity or date of creation of paintings. In this paper, we propose a technique for the examination of

  16. Detecting Corrosion Under Paint and Insulation

    Science.gov (United States)

    Bastin, Gary L.

    2011-01-01

    Corrosion is a major concern at the Kennedy Space Center in Florida due to the proximity of the center to the Atlantic Ocean and to salt water lagoons. High humidity, salt fogs, and ocean breezes, provide an ideal environment in which painted steel structures become corroded. Maintenance of painted steel structures is a never-ending process.

  17. Lead content in household paints in India

    International Nuclear Information System (INIS)

    Kumar, Abhay; Gottesfeld, Perry

    2008-01-01

    Lead and its compounds are used in paints not only to impart colour but also to make it durable, corrosion resistant and to improve drying. Adverse health impacts of lead especially on children have led countries to restrict or ban its use in paints. While U.S. and other developed countries instituted measures to limit the use of lead in paints, some developing countries including India have failed to regulate their lead content. The present study was undertaken to determine the levels of lead in new latex (water-based) and enamel paints (oil-based) intended for residential use in India. A total of 69 paint samples (38 latex and 31 enamel samples) from six of the most popular brands were analysed for lead concentrations. While all latex paint samples contained low levels of lead, (i.e., well below 600 ppm as regulated by United States' Consumer Products Safety Commission) the enamel paint samples of all but one brand contained significant concentrations of lead, ranging up to 140,000 ppm. In fact 84% of the enamel paints tested exceeded 600 ppm whereas only 38 % of all samples (including latex and enamel types) exceeded this regulatory level

  18. The Sign System in Chinese Landscape Paintings

    Science.gov (United States)

    McMahon, Cliff G.

    2003-01-01

    Paintings emerge from a culture field and must be interpreted in relation to the net of culture. A given culture will be implicated by the sign system used by the painter. Everyone agrees that in Chinese landscape paintings, the most important cultural bond is to ancient Chinese Taoism, and to a lesser degree, to Confucianism. Obviously, then, the…

  19. Construction appraisal team inspection results on welding and nondestructive examination activities

    International Nuclear Information System (INIS)

    Wu, P.C.S.; Shaaban, H.I.

    1987-09-01

    This report summarizes data and findings on deficiencies and discrepancies in welding and nondestructive examination (NDE) activities identified by the US Nuclear Regulatory Commission Construction Appraisal Team (CAT) during its inspection of 11 plants. The CAT reviewed selected welds and NDE packages in its inspection of the following plant areas: piping and pipe supports and/or restraints; modification and installation of reactor internals; electrical installations and electrical supports; instrumentation tubing and supports; heating, ventilation, and air conditioning (HVAC) systems and supports; fabrication and erection of structural steel; fabrication of refueling cavity and spent fuel pool liner; containment liner and containment penetrations; and fire protection systems. The CAT inspected both structural welds and pressure-retaining welds and reviewed welder qualification test records and welding procedure documents for code compliance. The NDE activities that were evaluated included visual examination, magnetic particle examination, liquid penetrant examination, ultrasonic examination, and radiographic examination of welds. 4 refs., 14 figs., 15 tabs

  20. Clinical Results of Arteriovenous Fistulas Constructed Using Autologous Vessels in End-Stage Renal Disease Patients on Hemodialysis

    Directory of Open Access Journals (Sweden)

    Ki Tae Kim

    2018-04-01

    Full Text Available Background: For hemodialysis patients with end-stage renal disease (ESRD, it is important to construct an efficient vascular access with a superior patency rate. This study investigated the factors influencing the efficiency of arteriovenous fistulas (AVFs constructed using an autologous vessel and evaluated the necessity of ultrasonography as a preoperative tool for AVF construction. Methods: A retrospective analysis was performed of 250 patients in whom an AVF was constructed using an autologous vessel due to ESRD at our institution from January 2009 to April 2016. Results: The 1-, 3-, and 5-year patency rates for all subjects were 87.6%, 85.6%, and 84.4%, respectively. The patients who underwent a preoperative evaluation of their vessels via ultrasonography had better patency rates than those who did not. Superior patency rates were found in patients under 65 years of age or with an anastomotic vein diameter of 3 mm or more. The 1-year patency rate and the diameter of the anastomotic vein showed a positive relationship. Conclusion: Ultrasonography is strongly recommended for AVF construction, and efforts should be made to increase the patency rate in patients over 65. Superior clinical results can be expected when an AVF is made using an autologous vessel with an anastomotic vein diameter of at least 3 mm.

  1. Spectrally selective paint coatings. Preparation and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Crnjak Orel, Z.C.; Klanjsek Gunde, M. [National Institute of Chemistry, Hajdrihova 19, SI-1000 Ljubljana (Slovenia)

    2001-06-01

    Preparation and characterization of spectrally selective paint coating for photothermal solar energy conversion are discussed. The applied methods for preparation of paints with described measurements and calculations of black-pigmented coatings were reviewed. The article represents not only possible future applications but also past and current applications of spectrally selective paint coating which are used all over the world since the 1980s. Spectrally selective paint coatings based on combinations of two types of resins, various types of pigments and three types of silica, were prepared. The influence of pigment type and pigment volume concentration (PVC) was studied by applying the Kubelka-Munk (K-M) theory. The relation between the degrees of dispersion and distribution of pigment particles across the paint layer is discussed in terms of K-M coefficients.

  2. Construction materials and Radon

    International Nuclear Information System (INIS)

    Paschuk, Sergei A.; Correa, Janine Nicolosi; Loriane, Fior; Schelin, Hugo R.; Pottker, Fabiana; Paula Melo, Vicente de

    2008-01-01

    Full text: Current studies have been performed with the aim to find the correlation of radon concentration in the air and used construction materials. At the first stage of the measurements different samples of materials used in civil construction were studied as a source of radon in the air and at the second step it was studied the radon infiltration insulation using different samples of finishing materials. For 222 Rn concentration measurements related to different construction materials as well as for the studies of radon emanation and its reduction, the sealed cell chambers, of approximately 60 x 60cm 2 , have been built using the ceramic and concrete blocks. This construction has been performed within protected and isolated laboratory environment to maintain the air humidity and temperature stable. These long term measurements have been performed using polycarbonate alpha track passive detectors. The exposure time was set about 15 days considering previous calibration performed at the Institute of Radiation Protection and Dosimetry (IRD/CNEN), where the efficiency of 70% was obtained for the density of alpha particle tracks about 13.8 cm -2 per exposure day and per kBq/m 3 of radon activity concentration. The chemical development of alpha tracks has been achieved by electrochemical etching. The track identification and counting have been done using a code based on the MATLAB Image Processing Toolbox. The cell chambers have been built following four principle steps: 1) Assembling the walls using the blocks and mortar; 2) Plaster installation; 3) Wall surface finishing using the lime; 4) Wall surface insulation by paint. Making the comparison between three layers installed at the masonry walls from concrete and ceramic blocks, it could be concluded that only wall painting with acrylic varnish attended the expectation and reduced the radon emanation flow by the factor of 2.5 approximately. Studied construction materials have been submitted the instant

  3. Significance of antifouling paint flakes to the distribution of dichlorodiphenyltrichloroethanes (DDTs) in estuarine sediment

    International Nuclear Information System (INIS)

    Wu, Chen-Chou; Bao, Lian-Jun; Tao, Shu; Zeng, Eddy Y.

    2016-01-01

    Recently published literature indicated that dichlorodiphenyltrichloroethane (DDT)-containing antifouling paint flakes were heterogeneously distributed within estuarine sediments. However, the significance of antifouling paint flakes in the fate and transport of DDT compounds and other organic pollutants in estuarine sediment is yet to be adequately addressed. To fill this knowledge gap, estuarine sediment and paint flakes from cabin and boat surfaces were collected from a fishery base in Guangdong Province of South China and analyzed for DDT compounds. Coarse fractioned samples collected from the vicinity of boat maintenance facilities contained appreciable amounts of colorful particles, which were identified as paint flakes by Fourier transform infrared spectroscopy. The highest concentrations of DDXs (sum of DDTs and its metabolites) occurred in the heavy-density (>1.7 g cm"−"3) fraction of coarse-size (200–2000 μm) sediments from near the boat maintenance facilities, suggesting the importance of paint flakes in the distribution pattern of “hot spots” in estuarine sediment. Moreover, the desorption rates of DDT compounds from paint flakes and the heavy-density fraction of coarse-size sediment were both extremely slow. Apparently, unevenly distributed paint flakes in sediment can artificially inflate the sorption capacity of heavy-density sediment for DDT compounds, and therefore can substantially change the environmental fate and behavior of hydrophobic organic chemicals in estuarine sediment. Finally, commonly used source diagnostic indices of DDT compounds were mostly grain-size and density dependent in sediment, as a result of the occurrence of paint flakes, which may strongly compromise the outcome of any source diagnostics efforts. - Highlights: • Concentrations of DDTs were elevated in coarse and high-density fractions. • The desorption rates of DDTs from coarse and high-density fraction were extreme slow. • DDTs-containing antifouling

  4. JT-60 negative ion beam NBI apparatus. Present state of its construction and initial experimental results

    Energy Technology Data Exchange (ETDEWEB)

    Kuriyama, Masaaki [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    1997-02-01

    The NBI (Neutral Beam Injection) apparatus used for negative ion at first in the world, has an aim to actually prove heating and electric current drive with high density plasma at the JT-60 and to constitute physical and technical bases for selection and design of heating apparatus of ITER (International Thermal Nuclear Fusion Experimental Reactor). Construction of 500 KeV negative ion NBI apparatus for the JT-60 started to operate on 1993 was completed at March, 1996. On the way, at a preliminary test on forming and acceleration of the negative ion beam using a portion of this apparatus, 400 KeV and 13.5 A/D of the highest deuterium negative ion beam acceleration in the world was obtained successfully, which gave a bright forecasting of the plasma heating and electric current drive experiment using the negative ion NBI apparatus. After March, 1996, some plans to begin beam incident experiment at the JT-60 using the negative ion NBI apparatus and to execute the heating and electric current drive experiment at the JT-60 under intending increase of beam output are progressed. (G.K.)

  5. Painting rusted steel: The role of aluminum phosphosilicate

    International Nuclear Information System (INIS)

    Roselli, S.N.; Amo, B. del; Carbonari, R.O.; Di Sarli, A.R.; Romagnoli, R.

    2013-01-01

    Highlights: •Aluminum phosphosilicate is an acid pigment which could act as mild phosphating agent. •Aluminum phosphosilicate can phosphatize iron oxides on rusted surfaces. •Aluminum phosphosilicate is compatible with acid binders. •Aluminum phosphosilicate could replace chromate in complete painting schemes. •Aluminum phosphosilicate primers improve paints adhesion on rusted surfaces. -- Abstract: Surface preparation is a key factor for the adequate performance of a paint system. The aim of this investigation is to employ a wash-primer to accomplish the chemical conversion of rusted surface when current cleaning operations are difficult to carry out. The active component of the wash-primer was aluminum phosphosilicate whose electrochemical behavior and the composition of the generated protective layer, both, were studied by electrochemical techniques and scanning electron microscopy (SEM), respectively. Primed rusted steel panels were coated with an alkyd system to perform accelerated tests in the salt spray chamber and electrochemical impedance measurements (EIS). These tests were conducted in parallel with a chromate wash primer and the same alkyd system. Results showed that the wash-primer containing aluminum phosphosilicate could be used satisfactorily to paint rusted steel exhibiting a similar performance to the chromate primer

  6. Electron beam hardened paint binder

    International Nuclear Information System (INIS)

    Johnson, O.B.; Labana, S.S.

    1976-01-01

    The invention concerns a paint binder hardened by the effect of electron beams (0.1-100 Mrad/sec). It consists of a dispersion of (A) an ethylenic unsaturated material in (B) at least one vinyl monomer. The component (A) in a reaction product of degraded rubber particles (0.1-4 μm) and an ethylenic unsaturated component with a reactive epoxy, hydroxy or carboxy group which is bonded to the rubber particles by ester or urethane compounds. The rubber particles possess a nucleus and a cross-linked elastomeric acryl polymer, an outer shell with reactive groups and an intermediate layer formed by the monomers of the nucleus and the shell. The manner of production is described in great detail and supplemented by 157 examples. The coatings are suitable to coat articles which will be subject to deformation. (UWI) [de

  7. KLIMT, FROM PAINTING TO FASHION

    Directory of Open Access Journals (Sweden)

    URDEA Olimpia

    2015-05-01

    Full Text Available Fashion has been a subject for most fields of art, starting from visual arts to cinema and literature. The metamorphoses of fashion, an art in itself, are under the sign of history that marked the social during the evolution of humanity. The present paper makes a reference to the links between fashion and Klimt’s work. Klimt proved to be a visionary by means of his visual, unique and unmistakable signature concerning the way he treated the clothed woman. As he worshipped the female body, he portrayed it, reflecting the fashion style of an era that was meant to be renewed. His work, strongly influenced by feminine values, became conspicuous as a manifesto against the rigidity of the Viennese society in the late nineteenth century and early twentieth century. The modernity of Klimt’s vision generated the metamorphosis of the woman model, from the corseted woman until that time, and not only in terms of fashion, to the freed woman, using the metaphorical instruments of his art. The artist’s complex creativity helps us find him in four different situations, all in close connection with fashion art: the painter Klimt, who portrays woman who shows herself by showing her garment; the fashion designer Klimt who suggests outfits for his collaborator, Emilie Flöge, remoulding the dress as a clothing item; the fashion photographer from the photographs of Emilie Flöge wearing his creations; and, indirectly, by his paintings from the cycle Women, which had a powerful impact on contemporary fashion. Such a complex, visionary creator, whose painting and fashion interfere, is worth mentioning for his contribution to the fashion art avatars.

  8. Increased persistence of antifouling paint biocides when associated with paint particles

    International Nuclear Information System (INIS)

    Thomas, K.V.; McHugh, M.; Hilton, M.; Waldock, M.

    2003-01-01

    Release of biocides associated with paint particles into marinas may increase their persistence in the environment. - Current regulatory risk assessment procedures only assess the impact of antifouling paint biocides that are released through leaching from a painted surface. Hull cleaning activities can lead to particles of antifouling paint containing biocides to enter the environment. Comparative pseudo-first order anaerobic degradation rate constants and half-lives were determined for a selection of common antifouling paint booster biocides, their degradation products, and associated with paint particles. Anaerobic half-lives of <0.5 days were calculated for chlorothalonil, dichlofluanid, and SeaNine 211, between 1 and 3 days for DCPMU and DCPU, between 14 and 35 days for diuron and CPDU, and over 226 days for GS26575 and Irgarol 1051. Increased persistence was observed when the compounds were introduced to sediments associated with antifouling paint particles. When present as antifouling paint particles, an increased half-life of 9.9 days for SeaNine 211 and 1.4 days was calculated for dichlofluanid, no significant degradation was observed for diuron. It is suspected that this is due to much of the biocide being initially bound within the matrix of the paint particle that is slowly released through dissolution processes into the sediment pore water prior to degradation. The release of booster biocides associated with paint particles into marinas has the potential to lead to their accumulation unless activities such as hull cleaning are strictly regulated

  9. Increased persistence of antifouling paint biocides when associated with paint particles

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, K.V.; McHugh, M.; Hilton, M.; Waldock, M

    2003-05-01

    Release of biocides associated with paint particles into marinas may increase their persistence in the environment. - Current regulatory risk assessment procedures only assess the impact of antifouling paint biocides that are released through leaching from a painted surface. Hull cleaning activities can lead to particles of antifouling paint containing biocides to enter the environment. Comparative pseudo-first order anaerobic degradation rate constants and half-lives were determined for a selection of common antifouling paint booster biocides, their degradation products, and associated with paint particles. Anaerobic half-lives of <0.5 days were calculated for chlorothalonil, dichlofluanid, and SeaNine 211, between 1 and 3 days for DCPMU and DCPU, between 14 and 35 days for diuron and CPDU, and over 226 days for GS26575 and Irgarol 1051. Increased persistence was observed when the compounds were introduced to sediments associated with antifouling paint particles. When present as antifouling paint particles, an increased half-life of 9.9 days for SeaNine 211 and 1.4 days was calculated for dichlofluanid, no significant degradation was observed for diuron. It is suspected that this is due to much of the biocide being initially bound within the matrix of the paint particle that is slowly released through dissolution processes into the sediment pore water prior to degradation. The release of booster biocides associated with paint particles into marinas has the potential to lead to their accumulation unless activities such as hull cleaning are strictly regulated.

  10. Preparation of water paint by radiation

    International Nuclear Information System (INIS)

    Makuuchi, Keizo

    1984-01-01

    The development of coatings which do not require any organic solvent have been the social needs. The emulsion made by radiation method is considered to meet possibly this requirement, but it has not been utilized well in the application to water paint. In this review, the investigation concerning the synthesis of water paint raw material by radiation is summarized. In the introduction, radiation curing, water paint and radiation emulsion polymerization are outlined, in the section of γ-ray emulsion polymerization, clean emulsion, cross-linked polymer particles and low temperature polymerization are described, and in the section of paint characteristics of radiation-induced emulsion-polymerized emulsion, the synthesis of thermosetting emulsion, the relation between the method of polymerization and the properties of emulsion, the performance of coating film, and self-hardening emulsion are explained. In the following section of skin-core double layer structured particle emulsion, skin-core double layer structured particles, optimal monomer composition, optimal polymerization process, the manufacturing test with a pilot plant, the performance of the paint, the durability of skin-core double layer structured particle coating film and low temperature curing water paint are described, and in the section of synthesis of emulsion by utilization of electron beam, electron beam emulsion polymerization and the synthesis of water paint by electron beam graft polymerization are described. (Yoshitake, I.)

  11. Use of test results from the percolation leaching test (TS3) in the framework of the Construction Products Directive

    Energy Technology Data Exchange (ETDEWEB)

    Van Zomeren, A.; Dijkstra, J.J. [ECN Environment and Energy Engineering, Petten (Netherlands); Mesman, M.; Spijker, J. [National Institute for Public Health and the Environment RIVM, Bilthoven (Netherlands); Eikelboom, R. [Ministry of Infrastructure and Environment IenM, Den Haag (Netherlands)

    2013-10-15

    The enforcement of the European Construction Products Directive (and the more actual Construction Products Regulation) has led to the development of European harmonised standards for assessment of the emission of 'dangerous substances' from construction materials. According to Basic Working Requirement (BWR) number 3, the emissions from construction products to soil and groundwater should not have an unacceptable impact on the environmental quality over the life cycle of the product. In this paper the technical needs and boundary conditions of leaching tests to obtain meaningful and reliable test results are explained. Although this paper will not go into detail on 'impact assessment' and the resulting development of regulatory criteria, we will show that the technical needs and boundary conditions of a test are to some extent dependent on what type of information is needed by regulators for environmental impact assessment. This short paper focuses on explaining the principles of testing leaching behaviour of aggregates, and briefly explains the leaching of size reduced and non-size reduced particles. It provides information for the actual discussions on size reduction before leaching tests.

  12. Measurement of tritium in dial painting industry

    International Nuclear Information System (INIS)

    Sawant, J.V.; Rudran, Kamala

    1995-01-01

    Tritium in the form of polystyrene is used coated on zinc sulphide as the active component for the manufacture of self-luminous paint. To study the radiological implication of airborne tritium in the luminous paint industry air monitoring study was conducted by cold strip method and Andersen method. Airborne particulate in different locations in luminous paint (LP) building and background areas were observed to be associated with activity median aerodynamic diameter (AMAD) of 1.8 to 5.0 um. Dose to soft tissue and lungs and effective whole body dose were evaluated. (author). 6 refs., 2 figs., 4 tabs., 2 ills

  13. Wet/dry film thickness measurement of paint by absorption spectroscopy with acousto-optic tunable filter spectrometer

    Science.gov (United States)

    Sinha, Pranay G.; Xiong, Xiangchun; Jin, Feng; Trivedi, Sudhir; Prasad, Narashima S.

    2005-08-01

    Controlling/monitoring the thickness of applied paint in real time is important to many situations including painting ship and submarine hulls in dry docks for maintaining health of ships and submarines against the harshness of the sea, in automobile and aerospace industries, and in a variety of other industries as a control sensor that plays significant role in product quality, process control, and cost control. Insufficient thickness results to inadequate protection while overspray leads to waste and pollution of the environment. A rugged instrumentation for the real time non-contact accurate measurement of wet and dry paint film thickness measurement will be immensely valuable. As paint is applied with several layers of the same or different type, thickness of each newly sprayed wet layer is of most interest, but measurement on dry paint is also useful. In this study, we use acousto-optic tunable filter-based near infrared spectrometer to obtain the absorption spectrum of layers of paint sprayed on sand blasted steel surface and thus measure the thickness of coating under both wet and dry situations. NIR spectra are obtained from 1100 to 2300 nm on four sample of different thickness of paint up to 127 micron. Partial least squares model built with the spectra shows good correlation with standard error of prediction within ~ 0.7 micron. Results indicate that the spectra also respond to the amount of organic solvent in the wet paint and can be used to monitor the degree of dryness of the paint in real time.

  14. Historical origins of Petrykivsky decorative painting

    Directory of Open Access Journals (Sweden)

    T. A. Harkava

    2017-07-01

    Full Text Available Petrykivsky decorative painting is a part of Ukrainian folk art. Domestic science of folk art has originated and has been developing primarily as a study of archaeological antiquities and artistic monuments of the past. Scientific papers, which comprehended the process of folk art development, began to appear in the late nineteenth century, Archaeological Congresses became the impetus for their appearance. Being a representative of the decorative painting, Petrikivsky decorative painting is rooted by its murals to Tripoli. It was created as a peasant domestic drawing. Inexhaustible diversity of local variants of Petrikivsky decorative painting, its evolutionary change, the individual characteristics of paintings of hundreds of famous Ukrainian artists do not even allow comparing it to any other European counterparts, each of which is characterized only by some individual techniques. Petrikivsky decorative painting got the significant boost in its distribution and development when it «came down» from walls to paper. Paper pictures - malyovky - were stucked to walls following the traditional rules of domestic interior’s decoration. Petrikivsky decorative painting got the official status in 1913, when E. Evenbah, by the initiative of D.I. Yavornytsky, gathered the collection of Petrikivsky decorative painting’s malyovkas and organized the exhibition in St. Petersburg. Motives of painting are rooted into the local flora and fauna and into the historical tradition. However, Petrikivsky decorative painting is not a direct reflection of natural motifs. World, created in paintings, is the product of the imagination of folk artist, it is the stylization of local flowers, fruits and birds. First names of Masters of Petrikivsky decorative painting, which appeared in historical sources, were T. Pata, N. Bilokin, I. Pavlenko. Their official recognition happened in 1930 after their participation in the first republican exhibition, which was later shown

  15. Toxicity of nanoparticles embedded in paints compared to pristine nanoparticles, in vitro study.

    Science.gov (United States)

    Smulders, Stijn; Luyts, Katrien; Brabants, Gert; Golanski, Luana; Martens, Johan; Vanoirbeek, Jeroen; Hoet, Peter H M

    2015-01-22

    The unique physicochemical properties of nanomaterials has led to an increased use in the paint and coating industry. In this study, the in vitro toxicity of three pristine ENPs (TiO2, Ag and SiO₂), three aged paints containing ENPs (TiO₂, Ag and SiO₂) and control paints without ENPs were compared. In a first experiment, cytotoxicity was assessed using a biculture consisting of human bronchial epithelial (16HBE14o-) cells and human monocytic cells (THP-1) to determine subtoxic concentrations. In a second experiment, a new coculture model of the lung-blood barrier consisting of 16HBE14o- cells, THP-1 and human lung microvascular endothelial cells (HLMVEC) was used to study pulmonary and extrapulmonary toxicity. The results show that the pristine TiO₂ and Ag ENPs have some cytotoxic effects at relative high dose, while pristine SiO₂ ENPs and all aged paints with ENPs and control paints do not. In the complex triculture model of the lung-blood barrier, no considerable changes were observed after exposure to subtoxic concentration of the different pristine ENPs and paint particles. In conclusion, we demonstrated that although pristine ENPs show some toxic effects, no significant toxicological effects were observed when they were embedded in a complex paint matrix. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  16. Comprehensive Interpretation of the Laboratory Experiments Results to Construct Model of the Polish Shale Gas Rocks

    Science.gov (United States)

    Jarzyna, Jadwiga A.; Krakowska, Paulina I.; Puskarczyk, Edyta; Wawrzyniak-Guz, Kamila; Zych, Marcin

    2018-03-01

    More than 70 rock samples from so-called sweet spots, i.e. the Ordovician Sa Formation and Silurian Ja Member of Pa Formation from the Baltic Basin (North Poland) were examined in the laboratory to determine bulk and grain density, total and effective/dynamic porosity, absolute permeability, pore diameters size, total surface area, and natural radioactivity. Results of the pyrolysis, i.e., TOC (Total Organic Carbon) together with S1 and S2 - parameters used to determine the hydrocarbon generation potential of rocks, were also considered. Elemental composition from chemical analyses and mineral composition from XRD measurements were also included. SCAL analysis, NMR experiments, Pressure Decay Permeability measurements together with water immersion porosimetry and adsorption/ desorption of nitrogen vapors method were carried out along with the comprehensive interpretation of the outcomes. Simple and multiple linear statistical regressions were used to recognize mutual relationships between parameters. Observed correlations and in some cases big dispersion of data and discrepancies in the property values obtained from different methods were the basis for building shale gas rock model for well logging interpretation. The model was verified by the result of the Monte Carlo modelling of spectral neutron-gamma log response in comparison with GEM log results.

  17. 24 CFR 35.135 - Use of paint containing lead.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Use of paint containing lead. 35... Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint Requirements and Definitions for All Programs. § 35.135 Use of paint containing lead. (a...

  18. A Case Study Application Of Time Study Model In Paint ...

    African Journals Online (AJOL)

    This paper presents a case study in the development and application of a time study model in a paint manufacturing company. The organization specializes in the production of different grades of paint and paint containers. The paint production activities include; weighing of raw materials, drying of raw materials, dissolving ...

  19. Effect of paint fumes on histoarchitecture of the testes of adult male ...

    African Journals Online (AJOL)

    abdominal incision was performed after which one testis was received from each rats, preserved in 10% formal saline and further processed for histological study using Hematoxylin and eosin technique. Results: The testes of the paint fumes ...

  20. 78 FR 27906 - Lead; Renovation, Repair, and Painting Program for Public and Commercial Buildings; Notice of...

    Science.gov (United States)

    2013-05-13

    ... the Federal Government in reducing lead exposures, particularly those resulting from lead-based paint... (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200... of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW...

  1. Constructing kinetics fatigue diagrams using testing results obtained on a machine with rigid loading for specimens of various thickness

    International Nuclear Information System (INIS)

    Simin'kovich, V.N.; Gladkij, Ya.N.; Deev, N.A.

    1981-01-01

    Bending tests of 40KhS steel specimens, tempered at 200 and 500 deg C, are conducted to investigate the possible effects of specimen thickness on fatigue crack growth. Kinetic fatigue diagrams are constructed using the investigation results. An increase in crack growth with thickness is observed only in high-tempered specimens. Changes in specimen thickness do not affect crack growth in 40KhS low-tempered steel [ru

  2. The Monitoring and Analysis of the Chinese Traditional Architecture Painting Decay - the Case of Jilan Pavilion in the Summer Palace

    Science.gov (United States)

    Zhan, L.; Wang, Z.; Zhao, X.; Liu, Z.; Liu, G.

    2017-08-01

    The painting is one of the most decorative elements of ancient Chinese architecture and it is sensitive to the natural environment. The outdoor painting is very easily to be affected by the natural environment and its color is easily to decay. In order to study the relationship between the painting decay and the physical environment, the two paintings on both east and west inner eaves of Jilan Pavilion beside the Kunming Lake in Summer Palace are taken as the research objects, because these two paintings are painted at the same period but their decay degrees are greatly different. Since 2013, the research group regularly monitors the color decay of these two paintings. Meanwhile, the physical environment around these two paintings has been monitored. Based on the analysis of the monitor data, it can be seen that the illumination is the major factor that causes the decay of the painting. Meanwhile, by using the ECOTECT software to stimulate the light environment around the Jilan Pavilion, it can be seen that it is the mirror reflection of the lake that causes the result that the illumination of the west eave (face east) is stronger than that of the east eave (face west).

  3. Operational results for the raster scanning power supply system constructed at the Bevalac Biomedical Facility

    International Nuclear Information System (INIS)

    Stover, G.; Halliwell, J.; Nyman, M.; Dwinell, R.

    1989-03-01

    A raster scanning power supply for controlling an 8.0 Tesla-meter relativistic heavy-ion beam at the Biomedical Facility has been recently completed and is undergoing electrical testing before on- line operation in 1989. The scanner system will provide tightly controlled beam uniformity and off-axis treatment profiles with large aspect ratios and unusual dimensions. This article will discuss original specifications, agreement with measured results and special device performance (i.e. GTOs, FET actuator assembly, etc.). 5 refs., 4 figs

  4. Biological image construction by using Raman radiation and Pca: preliminary results

    International Nuclear Information System (INIS)

    Martinez E, J. C.; Cordova F, T.; Hugo R, V.

    2015-10-01

    Full text: In the last years, the Raman spectroscopy (Rs) technique has had some applications in the study and analysis of biological samples, due to it is able to detect concentrations or presence of certain organic and inorganic compounds of medical interest. In this work, raw data were obtained through measurements in selected points on a square regions in order to detect specific organic / inorganic compounds on biological samples. Gold nano stars samples were prepared and coated with membrane markers (CD 10+ and CD 19+) and diluted in leukemic B lymphocytes. Each data block was evaluated independently by the method of principal component analysis (Pca) in order to find representative dimensionless values (Cp) for each Raman spectrum in a specific coordinate. Each Cp was normalized in a range of 0-255 in order to generate a representative image of 8 bits of the region under study. Data acquisition was performed with Raman microscopy system Renishaw in Via in the range of 550 to 1700 cm-1 with a 785 nm laser source, with a power of 17 m W and 15 s of exposure time were used for each spectrum. In preliminary results could detect the presence of molecular markers CD 10+ and CD 19+ with gold nano stars and discrimination between both markers. The results suggest conducting studies with specific concentrations organic and inorganic materials. (Author)

  5. Biological image construction by using Raman radiation and Pca: preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Martinez E, J. C. [IPN, Unidad Profesional Interdisciplinaria de Ingenieria, Campus Guanajuato, Av. Mineral de Valenciana 200, Col. Fracc. Industrial Puerto Interior, 36275 Silao, Guanajuato (Mexico); Cordova F, T. [Universidad de Guanajuato, DIC, Departamento de Ingenieria Fisica, Loma del Bosque No. 103, Col. Lomas del Campestre, 37150 Leon, Guanajuato (Mexico); Hugo R, V., E-mail: jcmartineze@ipn.mx [Universidad de Guadalajara, Centro Universitario de Tonala, Morelos No. 180, 69584 Tonala, Jalisco (Mexico)

    2015-10-15

    Full text: In the last years, the Raman spectroscopy (Rs) technique has had some applications in the study and analysis of biological samples, due to it is able to detect concentrations or presence of certain organic and inorganic compounds of medical interest. In this work, raw data were obtained through measurements in selected points on a square regions in order to detect specific organic / inorganic compounds on biological samples. Gold nano stars samples were prepared and coated with membrane markers (CD 10+ and CD 19+) and diluted in leukemic B lymphocytes. Each data block was evaluated independently by the method of principal component analysis (Pca) in order to find representative dimensionless values (Cp) for each Raman spectrum in a specific coordinate. Each Cp was normalized in a range of 0-255 in order to generate a representative image of 8 bits of the region under study. Data acquisition was performed with Raman microscopy system Renishaw in Via in the range of 550 to 1700 cm-1 with a 785 nm laser source, with a power of 17 m W and 15 s of exposure time were used for each spectrum. In preliminary results could detect the presence of molecular markers CD 10+ and CD 19+ with gold nano stars and discrimination between both markers. The results suggest conducting studies with specific concentrations organic and inorganic materials. (Author)

  6. Pointillist Watercolor Paintings: Exploring Optical Mixing.

    Science.gov (United States)

    Hamwi, Richard

    2001-01-01

    Focuses on the pointillist painting process offering background information about technique and how it can be used in the art classroom. Explores the appropriateness of the process for elementary through secondary school students. Includes educational objectives. (CMK)

  7. ITER nuclear components, preparing for the construction and R and D results

    Energy Technology Data Exchange (ETDEWEB)

    Ioki, K. E-mail: iokik@itereu.de; Akiba, M.; Barabaschi, P.; Barabash, V.; Chiocchio, S.; Daenner, W.; Elio, F.; Enoeda, M.; Ezato, K.; Federici, G.; Gervash, A.; Grebennikov, D.; Jones, L.; Kajiura, S.; Krylov, V.; Kuroda, T.; Lorenzetto, P.; Maruyama, S.; Merola, M.; Miki, N.; Morimoto, M.; Nakahira, M.; Ohmori, J.; Onozuka, M.; Rozov, V.; Sato, K.; Strebkov, Yu.; Suzuki, S.; Tanchuk, V.; Tivey, R.; Utin, Yu

    2004-08-01

    Progress has been made in the preparation of the procurement specifications for key nuclear components of ITER. Detailed design of the vacuum vessel (VV) and in-vessel components is being performed to consider fabrication methods and non-destructive tests (NDT). R and D activities are being carried out on vacuum vessel UT inspection with waves launched at an angle of 20 deg. or 30 deg. , on flow distribution tests of a two-channel model, on fabrication and testing of FW mock-ups and panels, on the blanket flexible support as a complete system including the housing, on the blanket co-axial pipe connection with guard vacuum for leak detection, and on divertor vertical target prototypes. The results give confidence in the validity of the design and identify possibilities of attractive alternate fabrication methods.

  8. ITER nuclear components, preparing for the construction and R&D results

    Science.gov (United States)

    Ioki, K.; Akiba, M.; Barabaschi, P.; Barabash, V.; Chiocchio, S.; Daenner, W.; Elio, F.; Enoeda, M.; Ezato, K.; Federici, G.; Gervash, A.; Grebennikov, D.; Jones, L.; Kajiura, S.; Krylov, V.; Kuroda, T.; Lorenzetto, P.; Maruyama, S.; Merola, M.; Miki, N.; Morimoto, M.; Nakahira, M.; Ohmori, J.; Onozuka, M.; Rozov, V.; Sato, K.; Strebkov, Yu; Suzuki, S.; Tanchuk, V.; Tivey, R.; Utin, Yu

    2004-08-01

    Progress has been made in the preparation of the procurement specifications for key nuclear components of ITER. Detailed design of the vacuum vessel (VV) and in-vessel components is being performed to consider fabrication methods and non-destructive tests (NDT). R&D activities are being carried out on vacuum vessel UT inspection with waves launched at an angle of 20° or 30°, on flow distribution tests of a two-channel model, on fabrication and testing of FW mock-ups and panels, on the blanket flexible support as a complete system including the housing, on the blanket co-axial pipe connection with guard vacuum for leak detection, and on divertor vertical target prototypes. The results give confidence in the validity of the design and identify possibilities of attractive alternate fabrication methods.

  9. [Spectral analysis of green pigments of painting and colored drawing in northern Chinese ancient architectures].

    Science.gov (United States)

    Wang, Li-Qin; Yan, Jing; Fan, Xiao-Lei; Ma, Tao

    2010-02-01

    It is important to identify pigments of painting and colored drawing in ancient architectures in order to restore and conserve them. The components of green pigments were detected with X-ray diffraction (XRD), X-ray fluorescence (XRF) and scanning electron microscopy-energy dispersive X-ray (SEM-EDX). Twenty-seven samples were collected from painting and colored drawing in northern Chinese ancient architectures in Beijing, Shanxi province and Gansu province. The experiment results showed that emerald green [CuCH3COO]2 x Cu(AsO2)2], a complex of copper aceto-arsenite pigment, had been used as the colored component in fifteen samples, whereas organic materials synthesized in the rest. However, in all samples there were no malachite and atacamite, green pigments commonly used in ancient time a long time ago. These two pigments have been found in Qin Shihuang's Terracotta Army and the wall paintings at Mogao Grettoes, Dunhuang, and some other famous wall paintings and color pottery figurines. However, emerald green was used many years later. It was reported that emerald green was synthesized by Germany in 1814 and had been widely used in China as watercolor on pith paper works and on scroll paintings since the 1850s. Because painting and colored drawing in ancient architectures stands outside, under sunlight and rain, it must be repaired and repainted in less than fifty years. Therefore, it is not surprising that emerald green was used in them. In recent years, artificial organic materials are increasingly used in painting and colored drawing in ancient architectures. From experiments it was also showed that in the same recolored painting and colored drawing, organic materials are usually in the later layers, but emerald green is in the earlier layers. This work supplies a lot of data for the purpose of selecting restoration materials and identifying painting and colored drawing in ancient architectures with a new method.

  10. ­A practical application of reduced-copper antifouling paint in marine biological research

    Directory of Open Access Journals (Sweden)

    Andrea S. Jerabek

    2016-07-01

    Full Text Available Biofouling of experimental cages and other field apparatuses can be problematic for scientists and has traditionally been addressed using frequent manual removal (e.g., scraping, scrubbing. Recent environmental restrictions and legislative changes have driven the development of less hazardous antifouling products, making antifouling paint a potential alternative option to manual removal. Consequently, the viability of using these newly developed products as a replacement for the manual cleaning of exclusion cages was experimentally investigated. There were six treatments tested, comprising three with settlement tiles in experimental cages coated with antifouling paint, two with settlement tiles in unpainted experimental cages, and one cage-free suspended tile. The three antifouling treatments comprised two reduced-copper paints (21% Cu2O and 40% Cu2O and one copper-free, Econea™-based paint (labeled “ecofriendly”. Antifouling paints were assessed for performance of preventing fouling of the cages and whether they elicited local effects on settlement tiles contained within them. All three paints performed well to reduce fouling of the cages during the initial six weeks of the experiment, but the efficacy of “ecofriendly” paint began to decrease during an extended deployment that lasted 14 weeks. The macro-community composition, biomass, and percent cover of settled organism on tiles within cages treated with copper-based paints (21% and 40% concentrations were indistinguishable from tiles within the manually scrubbed cages. In contrast, settlement to tiles from the “ecofriendly” treatment was different in composition of macro-community and lower in biomass, suggesting the presence of local effects and therefore rendering it unsuitable for use in settlement experiments. The results of this study suggest that reduced-copper paints have the potential to serve as an alternative to manual maintenance, which may be useful for deployments

  11. The BiPublishers ranking: Main results and methodological problems when constructing rankings of academic publishers

    Directory of Open Access Journals (Sweden)

    Torres-Salinas, Daniel

    2015-12-01

    Full Text Available We present the results of the Bibliometric Indicators for Publishers project (also known as BiPublishers. This project represents the first attempt to systematically develop bibliometric publisher rankings. The data for this project was derived from the Book Citation Index and the study time period was 2009-2013. We have developed 42 rankings: 4 by fields and 38 by disciplines. We display six indicators for publishers divided into three types: output, impact and publisher’s profile. The aim is to capture different characteristics of the research performance of publishers. 254 publishers were processed and classified according to publisher type: commercial publishers and university presses. We present the main publishers by field and then discuss the principal challenges presented when developing this type of tool. The BiPublishers ranking is an on-going project which aims to develop and explore new data sources and indicators to better capture and define the research impact of publishers.Presentamos los resultados del proyecto Bibliometric Indicators for Publishers (BiPublishers. Es el primer proyecto que desarrolla de manera sistemática rankings bibliométricos de editoriales. La fuente de datos empleada es el Book Citation Index y el periodo de análisis 2009-2013. Se presentan 42 rankings: 4 por áreas y 38 por disciplinas. Mostramos seis indicadores por editorial divididos según su tipología: producción, impacto y características editoriales. Se procesaron 254 editoriales y se clasificaron según el tipo: comerciales y universitarias. Se presentan las principales editoriales por áreas. Después, se discuten los principales retos a superar en el desarrollo de este tipo de herramientas. El ranking Bipublishers es un proyecto en desarrollo que persigue analizar y explorar nuevas fuentes de datos e indicadores para captar y definir el impacto de las editoriales académicas.

  12. Cleaning of Easel Paintings: An Overview

    International Nuclear Information System (INIS)

    Bordalo, R.; Morais, P.J.; Gouveia, H.; Young, C.

    2006-01-01

    The application of laser cleaning to paintings is relatively recent despite its use on stone-based materials for over 30 years. The cleaning of paintings is of high importance, because it is the least reversible invasive intervention, as well as the most usual of all conservation treatments. Paintings are multilayer system of heterogeneous nature, often very sensitive and inherent difficult to clean. Being a noncontact method, laser cleaning has advantages compared to alternative techniques. Over the last decade, there have been important research studies and advances. However, they are far from sufficient to study the effects on painting materials and to establish the best parameters for each material under investigation. This paper presents a historical overview of the application of laser technology to the cleaning of paintings giving special emphasis on the research of the last decade. An overview of the current research into the interaction between the radiation and the different painting materials (varnish, pigments, and medium) is also given. The pigment's mechanisms of discoloration and the presence of media as a variable factor in the discoloration of pigments are discussed.

  13. Annular electromagnetic pumps-construction and testing-theory, and comparison with experimental results; Pompes electromagnetiques annulaires - construction et essais - theorie et confrontation avec l'experience

    Energy Technology Data Exchange (ETDEWEB)

    Cambillard, E P; Schwab, B L [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    This report consists of three sections. The first is concerned with the description of different pumps which have been constructed, tests on these which have been completed and the results obtained. The second section presents a theoretical method for the determination of the coefficients, taking in account the break of the magnetic circuit. It is shown that the preliminary design calculations of the annular pumps can be made, neglecting the break of the magnetic circuit, by further assigning essential magnitudes (pressure, losses) with easily calculated coefficients. The third section of this report uses the theoretical bases exposed in the second section, and develop a new annular pump calculation method which takes-into account both the current out of balance and any type of winding. (authors) [French] Ce rapport comprend trois parties. La premiere est consacree a la description des differentes pompes construites, aux essais,effectues et aux resultats obtenus. La deuxieme partie expose une methode theorique de determination de coefficients tenant compte de l'ouverture du circuit magnetique. On montre que le calcul d'avant-projet des pompes annulaires peut s'effectuer comme si le circuit magnetique n'etait pas coupe, en affectant ensuite toutes les grandeurs essentielles (pression, pertes) de coefficients aisement calculables. La troisieme partie de ce rapport utilise les bases de la theorie exposee dans la deuxieme partie et developpe une nouvelle methode de calcul des pompes annulaires qui tient compte a la fois du desequilibre des courants et d'un bobinage quelconque. (auteurs)

  14. Neutron autoradiography: working-out method and application in investigations of test paintings

    International Nuclear Information System (INIS)

    Kalicki, A.; Panczyk, E.; Rowinska, L.; Sartowska, B.; Walis, L.; Pytel, K.; Pytel, B.; Koziel, A.; Dabkowski, L.; Wierzchnicka, M.; Strzalkowski, L.; Ostrowski, T.

    2001-01-01

    Neutron-induced autoradiography was carried out at MARIA research reactor in Poland. The paintings were exposed to the thermal neutrons. As a result, the radionuclides emitting beta particles and gamma rays were created from some of the elements existing in the painting. Beta particles were detected during successive exposure to a series of X-ray medical-sensitive films. The obtained images--blackening of the films depends mainly on the nuclear characteristic of recorded radionuclides and exposure parameters. The main purpose of this work was to work out a method, build a special stand and test sample paintings using neutron autoradiography. Samples of paintings were investigated and according to the obtained results, optimum test parameters have been selected: neutron irradiation conditions and autoradiographs exposure conditions

  15. Use of Nicotiana tabacum L extract for anti-Aedes Aegypti mosquito paint

    Science.gov (United States)

    Sandralintang, Trisiana Chrysanthi; Fauzantoro, Ahmad; Hermansyah, Heri; Jufri, Mahdi; Gozan, Misri

    2018-02-01

    This study intended to formulate mosquito repellent paints based tobacco leaf extracts-free pyrethroid substance which is safe for users. The active substance which was added to the paint as a mosquito repellent was an extract of tobacco leaves. The result of Anti-mosquito paint formulation produced was according to the Indonesia National Standard (SNI). The results of anti-Aedes Aegypti mosquito paint effectiveness test showed that 5% concentration of tobacco extract could kill half of the mosquito population (LC50) for 2 hours, the concentration of tobacco extract between 3-5% killed half the mosquito population (LC50) during 4 hours, while 1-3% and 0-1% concentration of tobacco extract killed half the mosquito population (LC50) for 6 and 24 hours, respectively.

  16. Tracking the transformation and transport of arsenic sulfide pigments in paints: synchrotron-based X-ray micro-analyses

    NARCIS (Netherlands)

    Keune, K.; Mass, J.; Meirer, F.; Pottasch, C.; van Loon, A.; Hull, A.; Church, J.; Pouyet, E.; Cotte, M.; Mehta, A.

    2015-01-01

    Realgar and orpiment, arsenic sulfide pigments used in historic paints, degrade under the influence of light, resulting in transparent, whitish, friable and/or crumbling paints. So far, para-realgar and arsenic trioxide have been identified as the main oxidation products of arsenic sulfide pigments.

  17. Tracking the transformation and transport of arsenic sulfide pigments in paints : synchrotron-based X-ray micro-analyses

    NARCIS (Netherlands)

    Keune, Katrien; Mass, Jennifer; Meirer, Florian; Pottasch, Carol; van Loon, Annelies; Hull, Alyssa; Church, Jonathan; Pouyet, Emeline; Cotte, Marine; Mehta, Apurva

    2015-01-01

    Realgar and orpiment, arsenic sulfide pigments used in historic paints, degrade under the influence of light, resulting in transparent, whitish, friable and/or crumbling paints. So far, para-realgar and arsenic trioxide have been identified as the main oxidation products of arsenic sulfide pigments.

  18. Hemispheric asymmetry of liking for representational and abstract paintings.

    Science.gov (United States)

    Nadal, Marcos; Schiavi, Susanna; Cattaneo, Zaira

    2017-10-13

    Although the neural correlates of the appreciation of aesthetic qualities have been the target of much research in the past decade, few experiments have explored the hemispheric asymmetries in underlying processes. In this study, we used a divided visual field paradigm to test for hemispheric asymmetries in men and women's preference for abstract and representational artworks. Both male and female participants liked representational paintings more when presented in the right visual field, whereas preference for abstract paintings was unaffected by presentation hemifield. We hypothesize that this result reflects a facilitation of the sort of visual processes relevant to laypeople's liking for art-specifically, local processing of highly informative object features-when artworks are presented in the right visual field, given the left hemisphere's advantage in processing such features.

  19. Detection of beta radiation emitted from painted tiles

    International Nuclear Information System (INIS)

    Caldas, L.V.E.

    1988-06-01

    At the Kraftwerk Union (KWU), Erlangen, Federal Republic of Germany, it was confirmed that some types of painted tiles of italian origin were radioactive. In this work, performed at Institut fur Strahlenschutz, GSF, Munich, Germany, ultra-thin (60μm) thermoluminescent samples of CaSO 4 :Tm were used for the determination of absorved dose rates in air (at the tile surface and at the distance of 5 cm from it) and of transmission factors for different tissue equivalent material thicknesses. For comparison the absorved dose rates in air from cement walls without tile revestment and with simple tile revestment (tiles without painted ornaments) were also determined. In these cases the results were the same as those obtained normally from building materials. (author) [pt

  20. Detection of beta radiation emitted from painted tiles

    International Nuclear Information System (INIS)

    Caldas, L.V.E.

    1987-01-01

    At the Krafwerk Union (KWU), Erlangen, Germany, it was confirmed that some types of painted tiles of italian origin were radioactive. In this Work, performed at Institut fur Strahlenschutz, GSF, Germany, ultrathin 60μm) thermoluminescent samples of CaSO 4 :Tm were used for the determination of absorved dose rates in air (at the tile surface and at distance of 5cm from it) and of transmission factors for different tissue equivalent material thicknesses. For comparison the absorved dose rates in air from cement walls without tile revestment and with simple tile revestment (tiles without painted ornaments) were also determined. In these cases the results were the same as those obtained normally from building materials. (Author) [pt

  1. Why I Believe People Need Painting By Numbers

    Directory of Open Access Journals (Sweden)

    Jason Makansi

    2018-01-01

    Full Text Available Jason Makansi. Painting By Numbers: How to Sharpen Your BS Detector and Smoke Out the Experts (Tucson AZ: Layla Dog Press, 2016. 196 pp. ISBN 978-0998425900. This piece briefly introduces my Painting By Numbers, which aims to take the core messages of the QL/QR community from academic and professional circles to the rest of the citizenry. I describe the book in the context of the critical need for the most basic numeracy tools to help consumers of news, information, and analysis�delivered through traditional and contemporary social media outlets�determine where a reported numerical result lies on the scale from utter nonsense to a widely established and accepted �fact.�

  2. Differences in reactions to paintings by male and female college students.

    Science.gov (United States)

    Polzella, D J

    2000-08-01

    38 male and 55 female college students rated digitized color facsimiles of 40 paintings that varied in artistic period (Renaissance, Rococo, Impressionist, Post-Impressionist, 20th Century) and subject matter (portrait, landscape, still life, behavior depiction) on 12 7-point semantic differential scales, e.g., simple-complex. Women judged the content of Rococo and Impressionist paintings as more pleasing than did men and Impressionist paintings evoked greater feelings of pleasure and relaxation among women than among men. In addition, paintings that depicted behaviors evoked more pleasure and alertness among women than among men. The results were interpreted in terms of underlying differences between men and women in perceptual style and emotional sensitivity.

  3. About Modern Graphic Reconstruction Wall Painting Of The Throne -Room Of Afrasiab

    Directory of Open Access Journals (Sweden)

    Sultanova Dilshoda

    2015-07-01

    Full Text Available Abstract In article are considered bases scientifically-creative reconstruction of pre-Islamic paintings hall of ambassadors of Afrasiab executed in interior foyer of institute of Archaeology RUZ.As a result of benchmark analysis modern painting with original museum of Afrasiab possible to define not before our days of a part and fragments in holistic type that is to say in beginning what looked before destruction arabic conqueror. Afrasiab paintings as specific facility more than 16 centuries is studied in our republic and has a questions which wait their own decisions.The author presents for the first time in picturesque manner to your attention its interpretation painting coming from its scientifically-creative experience.Given exploratory work possible consider as significant contribution to science on archaeology architecture and art.

  4. Digital holographic inspection for drying processes of paint films and ink dots

    Science.gov (United States)

    Yokota, M.; Aoyama, F.

    2017-06-01

    Digital holographic techniques to investigate drying processes of both paint films and ink dot is presented. The proposed technique based on digital holographic interferometry can achieve both visualization of variations and analysis of dryness of paint films in the drying process by using phase changes between two subsequent reconstructed complex amplitudes of the reflected light from the film. To follow the drying processes, holograms are recorded at a constant time interval. Phase-shifting digital holography has been applied to analyze the dryness of commercial paints applied on the metal plate. For analysis of an ink dot having diameter of a few hundred micrometers, digital holographic microscopy is applied to evaluating the time history of dryness of ink dot in the drying process. This paper describes these holographic techniques applied to the commercially available paint and ink and presents some experimental results.

  5. Lead contamination of paint remediation workers' vehicles.

    Science.gov (United States)

    Boraiko, Carol; Wright, Eva M; Ralston, Faye

    2013-03-01

    Exposure to lead has been shown to be harmful to adults; it is a teratogen, it can damage the peripheral nervous system, and it adversely affects the reproductive system. Professional lead-based paint remediation workers are at risk of exposure to lead dust. The authors' study was conducted to determine if these remediation workers transfer lead from their work site to their vehicles and then potentially expose their families. It was hypothesized that remediation workers transported the lead from the remediation work site to the floorboards of their vehicles due to not following required protective equipment use. The laboratory's level of quantitation for lead on the wipe samples, 10 microg/ft2, was used to indicate lead contamination. This level was exceeded in 50% of the floorboards sampled. These results confirm that many vehicle floorboards used by remediation workers are contaminated with lead dust, potentially resulting in transfer of lead dust. The ultimate detrimental outcome could be the transfer of lead particles to other family members, causing the poisoning of a child or other at-risk person.

  6. The ITER magnets: Preparation for full size construction based on the results of the model coil programme

    International Nuclear Information System (INIS)

    Huguet, M.

    2003-01-01

    The ITER magnets are long-lead time items and the preparation of their construction is the subject of a major and coordinated effort of the ITER International Team and Participant Teams. The results of the ITER model coil programme constitute the basis and the main source of data for the preparation of the technical specifications for the procurement of the ITER magnets. A review of the salient results of the ITER model coil programme is given and the significance of these results for the preparation of full size industrial production is explained. The model coil programme has confirmed the validity of the design and the manufacturer's ability to produce the coils with the required quality level. The programme has also allowed the optimisation of the conductor design and the identification of further development which would lead to cost reductions of the toroidal field coil case. (author)

  7. Training facilitates object recognition in cubist paintings

    Directory of Open Access Journals (Sweden)

    Martin Wiesmann

    2010-03-01

    Full Text Available To the naïve observer, cubist paintings contain geometrical forms in which familiar objects are hardly recognizable, even in the presence of a meaningful title. We used fMRI to test whether a short training session about Cubism would facilitate object recognition in paintings by Picasso, Braque and Gris. Subjects, who had no formal art education, were presented with titled or untitled cubist paintings and scrambled images, and performed object recognition tasks. Relative to the control group, trained subjects recognized more objects in the paintings, their response latencies were significantly shorter, and they showed enhanced activation in the parahippocampal cortex, with a parametric increase in the amplitude of the fMRI signal as a function of the number of recognized objects. Moreover, trained subjects were slower to report not recognizing any familiar objects in the paintings and these longer response latencies were correlated with activation in a fronto-parietal network. These findings suggest that trained subjects adopted a visual search strategy and used contextual associations to perform the tasks. Our study supports the proactive brain framework, according to which the brain uses associations to generate predictions.

  8. Photoacoustic signal attenuation analysis for the assessment of thin layers thickness in paintings

    Science.gov (United States)

    Tserevelakis, George J.; Dal Fovo, Alice; Melessanaki, Krystalia; Fontana, Raffaella; Zacharakis, Giannis

    2018-03-01

    This study introduces a novel method for the thickness estimation of thin paint layers in works of art, based on photoacoustic signal attenuation analysis (PAcSAA). Ad hoc designed samples with acrylic paint layers (Primary Red Magenta, Cadmium Yellow, Ultramarine Blue) of various thicknesses on glass substrates were realized for the specific application. After characterization by Optical Coherence Tomography imaging, samples were irradiated at the back side using low energy nanosecond laser pulses of 532 nm wavelength. Photoacoustic waves undergo a frequency-dependent exponential attenuation through the paint layer, before being detected by a broadband ultrasonic transducer. Frequency analysis of the recorded time-domain signals allows for the estimation of the average transmitted frequency function, which shows an exponential decay with the layer thickness. Ultrasonic attenuation models were obtained for each pigment and used to fit the data acquired on an inhomogeneous painted mock-up simulating a real canvas painting. Thickness evaluation through PAcSAA resulted in excellent agreement with cross-section analysis with a conventional brightfield microscope. The results of the current study demonstrate the potential of the proposed PAcSAA method for the non-destructive stratigraphic analysis of painted artworks.

  9. Construction of PREMUX and preliminary experimental results, as preparation for the HCPB breeder unit mock-up testing

    Energy Technology Data Exchange (ETDEWEB)

    Hernández, F., E-mail: francisco.hernandez@kit.edu [Karlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology (INR) (Germany); Kolb, M. [Karlsruhe Institute of Technology (KIT), Institute for Applied Materials (IAM-WPT) (Germany); Annabattula, R. [Indian Institute of Technology Madras (IITM), Department of Mechanical Engineering (India); Weth, A. von der [Karlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology (INR) (Germany)

    2014-10-15

    Highlights: • PREMUX has been constructed as preparation for a future out-of-pile thermo-mechanical qualification of a HCPB breeder unit mock-up. • The rationale and constructive details of PREMUX are reported in this paper. • PREMUX serves as a test rig for the new heater system developed for the HCPB-BU mock-up. • PREMUX will be used as benchmark for the thermal and thermo-mechanical models developed in ANSYS for the pebble beds of the HCPB-BU. • Preliminary results show the functionality of PREMUX and the good agreement of the measured temperatures with the thermal model developed in ANSYS. - Abstract: One of the European blanket designs for ITER is the Helium Cooled Pebble Bed (HCPB) blanket. The core of the HCPB-TBM consists of so-called breeder units (BUs), which encloses beryllium as neutron multiplier and lithium orthosilicate (Li{sub 4}SiO{sub 4}) as tritium breeder in form of pebble beds. After the design phase of the HCPB-BU, a non-nuclear thermal and thermo-mechanical qualification program for this device is running at the Karlsruhe Institute of Technology. Before the complex full scale BU testing, a pre-test mock-up experiment (PREMUX) has been constructed, which consists of a slice of the BU containing the Li{sub 4}SiO{sub 4} pebble bed. PREMUX is going to be operated under highly ITER-relevant conditions and has the following goals: (1) as a testing rig of new heater concept based on a matrix of wire heaters, (2) as benchmark for the existing finite element method (FEM) codes used for the thermo-mechanical assessment of the Li{sub 4}SiO{sub 4} pebble bed, and (3) in situ measurement of thermal conductivity of the Li{sub 4}SiO{sub 4} pebble bed during the tests. This paper describes the construction of PREMUX, its rationale and the experimental campaign planned with the device. Preliminary results testing the algorithm used for the temperature reconstruction of the pebble bed are reported and compared qualitatively with first analyses

  10. Lung cancer risk among workers in the construction industry: results from two case–control studies in Montreal

    OpenAIRE

    Lacourt, Aude; Pintos, Javier; Lavoué, Jérôme; Richardson, Lesley; Siemiatycki, Jack

    2015-01-01

    Background Given the large number of workers in the construction industry, it is important to derive accurate and valid estimates of cancer risk, and in particular lung cancer risk. In most previous studies, risks among construction workers were compared with general populations including blue and white collar workers. The main objectives of this study were to assess whether construction workers experience excess lung cancer risk, and whether exposure to selected construction industry exposur...

  11. Review of low-energy construction, air tightness, ventilation strategies and indoor radon: results from Finnish houses and apartments

    International Nuclear Information System (INIS)

    Arvela, H.; Holmgren, O.; Reisbacka, H.; Vinha, J.

    2014-01-01

    Low-energy and passive house construction practices are characterised by increased insulation, high air tightness of the building shell and controlled mechanical ventilation with heat recovery. As a result of the interaction of mechanical ventilation and high air tightness, the pressure difference in a building can be markedly enhanced. This may lead to elevated indoor radon levels. Minor leakages in the foundation can affect the radon concentration, even in the case where such leaks do not markedly reduce the total air tightness. The potential for high pressures to affect indoor radon concentrations markedly increases when the air tightness ACH 50 , i.e. the air change per hour induced by a pressure difference of 50 Pa, is -1 . Pressure differences in Finnish low-rise residential houses having mechanical supply and exhaust ventilation with heat recovery (MSEV) are typically 2-3 Pa, clearly lower than the values of 5-9 Pa in houses with only mechanical exhaust ventilation (MEV). In MSEV houses, radon concentrations are typically 30 % lower than in MEV houses. In new MSEV houses with an ACH50 of 0.6 h -1 , the limit for passive construction, the analytical estimates predict an increase of 100 % in the radon concentration compared with older houses with an ACH50 of 4.0 h -1 . This poses a challenge for efficient radon prevention in new construction. Radon concentrations are typically 30 % lower in houses with two storeys compared with only one storey. The introduction of an MSEV ventilation strategy in typically very airtight apartments has markedly reduced pressure differences and radon concentrations. (authors)

  12. The influence of photocatalytic interior paints on indoor air quality

    Science.gov (United States)

    Auvinen, Joonas; Wirtanen, Leif

    2008-06-01

    A clean indoor air is important for the well-being and health of people. Lately, new photocatalytic paints have been launched on the market, which are claimed to have air-purifying effects. Photocatalysis initiates radical reactions. Radicals are formed when a photocatalyst (e.g. TiO2) is subjected to radiation. Typical radicals are the hydroxyl radical (radOH) and the superoxide radical (radO2-). Radicals cause chain reactions, which degrade and decompose organic compounds. The end products of these chain reactions are water and carbon dioxide, if the reactions are fully completed (mineralization). If mineralization does not take place, then a great number of side products can be formed, whose properties are not well understood. The side products of photocatalytic reactions can be permanent and stabile. The decomposition of indoor air impurities on the surface of photocatalytic paints is not obvious. The ability of photocatalytic indoor paints to reduce chemical indoor air impurities is the key issue of this study. Six different paints with different binder systems, such as lime, polyorganic siloxane, silica sol-gel and organic binders, were examined. The experiments were divided into three topics: degradation of an organic binder, photocatalytic decomposition of formaldehyde, and a volatile organic compound (VOC) mixture consisting of five different indoor air VOCs. All tests were carried out in an environmental test chamber under dynamic conditions. The test results indicate that many indoor pollutants are generated under normal- and UVA-light. Typical compounds formed include formaldehyde, acetone, acetaldehyde, etc. A clear decrease of formaldehyde or the VOC mixture concentration was not observed. All possibly generated compounds could not be collected or analyzed in this research project, but the measurements show that photocatalytic reactions do not generate only carbon dioxide and water. Photocatalytic decomposition of indoor air impurities can, however

  13. [Occupational exposure to hexavalent chromium during aircraft painting].

    Science.gov (United States)

    Gherardi, M; Gatto, M P; Gordiani, A; Paci, E; Proietto, A

    2007-01-01

    Hygienists are interested in hexavalent chromium due to its genotoxic and carcinogenic effect on humans. The use of products containing hexavalent chromium is decreasing in many industrial fields because of the substitution with less-toxic compounds. In the aeronautical industry, however, the chromate are added to primer paint as a corrosion inhibitor of aircrafts surfaces: so hexavalent chromium compounds are available in many primers with a composition ranging from 10% to 13%. The application of these primers by using electrostatic guns potentially exposes painting and coating workers at high concentrations of aerosols containing Cr(VI). The aim of the present study is the evaluation of professional exposure to hexavalent chromium during aircraft painting, by adopting both environmental personal sampling and biological monitoring. To valuate workers exposure levels the personal measurements results have been compared with the exposure limit values (TLV-TWA) and the urinary chromium contents with the biological exposure indices (IBE). Moreover the strategy of coupling environmental sampling with biological monitoring seems to be a useful instrument to measure the validity of the individual protection devices.

  14. USE OF NANOTECHNOLOGY PRE-TREATMENT IN AUTOMOTIVE PAINTING LINE

    Directory of Open Access Journals (Sweden)

    Alberto Nei Carvalho Costa

    2012-09-01

    Full Text Available The current safety requirements, environmental impacts and performance have been ledding the automotive industry to search for new alternatives, not just for new car bodies materials, also for new sheet surface treatments as well, used in the painting process in order to fit simultaneous, environmental requirements and corrosion resistance maintenance, that are the key feature guarantees offered by automakers and are also vital to the durability of the vehicle. This fact is of great importance considering that, besides the various types of steels and their metalic coatings, another factor that directly influences the corrosion resistance is the painting system used. Within this context, the GMB, in partnership with CSN, has been performing several works by adding the knowledge of the supplier to automotive technology. An example of this partnership we have the present study, which aimed to, comparatively, evaluate the corrosion resistance of two systems of painted galvanized steel, the first one with pre-treatment based on a traditional phosphate, and the another one based on a nano-ceramic film. In this study, was found out that materials with pre-treatment based on results of nanotechnology showed similar corrosion resistance comparing the phosphatized materials in a traditional way.

  15. Characterizing microbial diversity and damage in mural paintings.

    Science.gov (United States)

    Rosado, Tânia; Mirão, José; Candeias, António; Caldeira, Ana Teresa

    2015-02-01

    Mural paintings are some of the oldest and most important cultural expressions of mankind and play an important role for the understanding of societies and civilizations. These cultural assets have high economic and cultural value and therefore their degradation has social and economic impact. The present work presents a novel microanalytical approach to understand the damages caused by microbial communities in mural paintings. This comprises the characterization and identification of microbial diversity and evaluation of damage promoted by their biological activity. Culture-dependent methods and DNA-based approaches like denaturing gradient gel electrophoresis (DGGE) and pyrosequencing are important tools in the isolation and identification of the microbial communities allowing characterization of the biota involved in the biodeterioration phenomena. Raman microspectrometry, infrared spectrometry, and variable pressure scanning electron microscopy coupled with energy-dispersive X-ray spectrometry are also useful tools for evaluation of the presence of microbial contamination and detection of the alteration products resulting from metabolic activity of the microorganisms. This study shows that the degradation status of mural paintings can be correlated to the presence of metabolically active microorganisms.

  16. Limewashed mural paintings as seen by VIS-IR reflectography

    Science.gov (United States)

    Fontana, R.; Striova, J.; Barucci, M.; Pampaloni, E.; Raffaelli, M.; Pezzati, L.; Mariotti, P.

    2015-06-01

    Near-Infrared (NIR) reflectography is a well-established technique for painting diagnostics, offering a fundamental contribution to the conservation of paintings. Since the '80s it has been routinely applied to study the execution technique of the author, as well as the presence of pentimenti, retouches, integrations or underdrawing. In the last decades IR reflectography has been extended to the visible (VIS) spectral range, providing information about the pigment composition. Up to now the multispectral analysis is still applied at an experimental level, as the processing of the image set is not straightforward. Rarely multispectral VIS-IR application has been applied to frescos, probably due to the lack, in most cases, of a scattering background. In this work we present the results provided by a multispectral scanning device based on single sensor acquisition, working in the 380-2500 nm spectral range, that is a laboratory prototype specifically built for research-grade imaging. The technique have been applied on a mock up simulating a mural painting substrate where an underdrawing, made of either carbon or iron-gall ink, was covered by different surface layers of limewash, the so-called scialbo.

  17. The development of a new analytical model for the identification of saccharide binders in paint samples.

    Science.gov (United States)

    Lluveras-Tenorio, Anna; Mazurek, Joy; Restivo, Annalaura; Colombini, Maria Perla; Bonaduce, Ilaria

    2012-01-01

    This paper describes a method for reliably identifying saccharide materials in paintings. Since the 3(rd) millennium B.C., polysaccharide materials such as plant gums, sugar, flour, and honey were used as binding media and sizing agents in paintings, illuminated manuscripts, and polychrome objects. Although it has been reported that plant gums have a stable composition, their identification in paint samples is often doubtful and rarely discussed. Our research was carried out independently at two different laboratories: the Getty Conservation Institute in Los Angeles, USA (GCI) and the Department of Chemistry and Industrial Chemistry of the University of Pisa, Italy (DCCI). It was shown in a previous stage of this research that the two methods give highly comparable data when analysing both reference paint samples and paint layers from art objects, thus the combined data was used to build a large database. In this study, the simultaneous presence of proteinaceous binders and pigments in fresh and artificially aged paint replicas was investigated, and it highlighted how these can affect the sugar profile of arabic, tragacanth, and fruit tree gums. The environmental contamination due to sugars from various plant tissues is also discussed. The results allowed the development of a new model for the reliable identification of saccharide binders in paintings based on the evaluation of markers that are stable to ageing and unaffected by pigments. This new model was applied to the sugar profiles obtained from the analysis of a large number of samples from murals, easel paintings, manuscripts, and polychrome objects from different geographical areas and dating from the 13(th) century BC to the 20(th) century AD, thus demonstrating its reliability.

  18. PIXE analysis of historical paintings: Is the gain worth the risk?

    International Nuclear Information System (INIS)

    Calligaro, T.; Gonzalez, V.; Pichon, L.

    2015-01-01

    The PIXE analysis of easel paintings constitutes a challenging task. Despite recognized merits and a few emblematic applications, PIXE has never been routinely applied to these fragile, complex and precious targets. The present work discusses the place of PIXE in the study of easel paintings and opens up perspectives for a more systematic usage of this analytical technique. Progress achieved since decades in the implementation of PIXE to study such fragile cultural heritage artefacts is reviewed, notably at the LABEC laboratory in Italy and at the AGLAE facility of the C2RMF in France. Two specific techniques developed for paintings are detailed and exemplified on Renaissance painting masterpieces: differential PIXE for paint layers depth profiling and multi-scale elemental mapping for the imaging of pigment distribution. Beam-induced damage, a major concern, notably depends on the employed beam fluence in particle/cm"2 or μC/cm"2. After recalling previous works on damage induced in chemical products comparable to pigments, we present the behaviour under different fluences of protons of a few MeV (1–300 μC/cm"2) of targets having high resemblance to historical easel paintings: pellets of specially synthesized lead white pigments, layers of lead white mixed with linseed oil and areas containing lead white of two 19th century paintworks. The results shed new lights on the behaviour of paintworks under the beam and pave the way to strategies for damage mitigation. In particular, the lowering of PIXE performance induced by the decrease of the beam fluence sets a trade-off between risk of damage and gained information which also impacts the PIXE scanning protocol for paintings. As an illustration of an adequate adjustment of this balance, we report the exploratory application of PIXE mapping to a large area of a 19th century easel painting without damage. The recorded elemental maps are compared to elemental maps collected on the same area using laboratory

  19. PIXE analysis of historical paintings: Is the gain worth the risk?

    Science.gov (United States)

    Calligaro, T.; Gonzalez, V.; Pichon, L.

    2015-11-01

    The PIXE analysis of easel paintings constitutes a challenging task. Despite recognized merits and a few emblematic applications, PIXE has never been routinely applied to these fragile, complex and precious targets. The present work discusses the place of PIXE in the study of easel paintings and opens up perspectives for a more systematic usage of this analytical technique. Progress achieved since decades in the implementation of PIXE to study such fragile cultural heritage artefacts is reviewed, notably at the LABEC laboratory in Italy and at the AGLAE facility of the C2RMF in France. Two specific techniques developed for paintings are detailed and exemplified on Renaissance painting masterpieces: differential PIXE for paint layers depth profiling and multi-scale elemental mapping for the imaging of pigment distribution. Beam-induced damage, a major concern, notably depends on the employed beam fluence in particle/cm2 or μC/cm2. After recalling previous works on damage induced in chemical products comparable to pigments, we present the behaviour under different fluences of protons of a few MeV (1-300 μC/cm2) of targets having high resemblance to historical easel paintings: pellets of specially synthesized lead white pigments, layers of lead white mixed with linseed oil and areas containing lead white of two 19th century paintworks. The results shed new lights on the behaviour of paintworks under the beam and pave the way to strategies for damage mitigation. In particular, the lowering of PIXE performance induced by the decrease of the beam fluence sets a trade-off between risk of damage and gained information which also impacts the PIXE scanning protocol for paintings. As an illustration of an adequate adjustment of this balance, we report the exploratory application of PIXE mapping to a large area of a 19th century easel painting without damage. The recorded elemental maps are compared to elemental maps collected on the same area using laboratory-based scanning

  20. Comparative analysis of automotive paints by laser induced breakdown spectroscopy and nonparametric permutation tests

    International Nuclear Information System (INIS)

    McIntee, Erin; Viglino, Emilie; Rinke, Caitlin; Kumor, Stephanie; Ni Liqiang; Sigman, Michael E.

    2010-01-01

    Laser-induced breakdown spectroscopy (LIBS) has been investigated for the discrimination of automobile paint samples. Paint samples from automobiles of different makes, models, and years were collected and separated into sets based on the color, presence or absence of effect pigments and the number of paint layers. Twelve LIBS spectra were obtained for each paint sample, each an average of a five single shot 'drill down' spectra from consecutive laser ablations in the same spot on the sample. Analyses by a nonparametric permutation test and a parametric Wald test were performed to determine the extent of discrimination within each set of paint samples. The discrimination power and Type I error were assessed for each data analysis method. Conversion of the spectral intensity to a log-scale (base 10) resulted in a higher overall discrimination power while observing the same significance level. Working on the log-scale, the nonparametric permutation tests gave an overall 89.83% discrimination power with a size of Type I error being 4.44% at the nominal significance level of 5%. White paint samples, as a group, were the most difficult to differentiate with the power being only 86.56% followed by 95.83% for black paint samples. Parametric analysis of the data set produced lower discrimination (85.17%) with 3.33% Type I errors, which is not recommended for both theoretical and practical considerations. The nonparametric testing method is applicable across many analytical comparisons, with the specific application described here being the pairwise comparison of automotive paint samples.

  1. The development of a new analytical model for the identification of saccharide binders in paint samples.

    Directory of Open Access Journals (Sweden)

    Anna Lluveras-Tenorio

    Full Text Available This paper describes a method for reliably identifying saccharide materials in paintings. Since the 3(rd millennium B.C., polysaccharide materials such as plant gums, sugar, flour, and honey were used as binding media and sizing agents in paintings, illuminated manuscripts, and polychrome objects. Although it has been reported that plant gums have a stable composition, their identification in paint samples is often doubtful and rarely discussed. Our research was carried out independently at two different laboratories: the Getty Conservation Institute in Los Angeles, USA (GCI and the Department of Chemistry and Industrial Chemistry of the University of Pisa, Italy (DCCI. It was shown in a previous stage of this research that the two methods give highly comparable data when analysing both reference paint samples and paint layers from art objects, thus the combined data was used to build a large database. In this study, the simultaneous presence of proteinaceous binders and pigments in fresh and artificially aged paint replicas was investigated, and it highlighted how these can affect the sugar profile of arabic, tragacanth, and fruit tree gums. The environmental contamination due to sugars from various plant tissues is also discussed. The results allowed the development of a new model for the reliable identification of saccharide binders in paintings based on the evaluation of markers that are stable to ageing and unaffected by pigments. This new model was applied to the sugar profiles obtained from the analysis of a large number of samples from murals, easel paintings, manuscripts, and polychrome objects from different geographical areas and dating from the 13(th century BC to the 20(th century AD, thus demonstrating its reliability.

  2. The Development of a New Analytical Model for the Identification of Saccharide Binders in Paint Samples

    Science.gov (United States)

    Restivo, Annalaura; Colombini, Maria Perla; Bonaduce, Ilaria

    2012-01-01

    This paper describes a method for reliably identifying saccharide materials in paintings. Since the 3rd millennium B.C., polysaccharide materials such as plant gums, sugar, flour, and honey were used as binding media and sizing agents in paintings, illuminated manuscripts, and polychrome objects. Although it has been reported that plant gums have a stable composition, their identification in paint samples is often doubtful and rarely discussed. Our research was carried out independently at two different laboratories: the Getty Conservation Institute in Los Angeles, USA (GCI) and the Department of Chemistry and Industrial Chemistry of the University of Pisa, Italy (DCCI). It was shown in a previous stage of this research that the two methods give highly comparable data when analysing both reference paint samples and paint layers from art objects, thus the combined data was used to build a large database. In this study, the simultaneous presence of proteinaceous binders and pigments in fresh and artificially aged paint replicas was investigated, and it highlighted how these can affect the sugar profile of arabic, tragacanth, and fruit tree gums. The environmental contamination due to sugars from various plant tissues is also discussed. The results allowed the development of a new model for the reliable identification of saccharide binders in paintings based on the evaluation of markers that are stable to ageing and unaffected by pigments. This new model was applied to the sugar profiles obtained from the analysis of a large number of samples from murals, easel paintings, manuscripts, and polychrome objects from different geographical areas and dating from the 13th century BC to the 20th century AD, thus demonstrating its reliability. PMID:23166654

  3. Water-Based Pressure-Sensitive Paints

    Science.gov (United States)

    Jordan, Jeffrey D.; Watkins, A. Neal; Oglesby, Donald M.; Ingram, JoAnne L.

    2006-01-01

    Water-based pressure-sensitive paints (PSPs) have been invented as alternatives to conventional organic-solvent-based pressure-sensitive paints, which are used primarily for indicating distributions of air pressure on wind-tunnel models. Typically, PSPs are sprayed onto aerodynamic models after they have been mounted in wind tunnels. When conventional organic-solvent-based PSPs are used, this practice creates a problem of removing toxic fumes from inside the wind tunnels. The use of water-based PSPs eliminates this problem. The waterbased PSPs offer high performance as pressure indicators, plus all the advantages of common water-based paints (low toxicity, low concentrations of volatile organic compounds, and easy cleanup by use of water).

  4. Hierarchical Micro-Nano Coatings by Painting

    Science.gov (United States)

    Kirveslahti, Anna; Korhonen, Tuulia; Suvanto, Mika; Pakkanen, Tapani A.

    2016-03-01

    In this paper, the wettability properties of coatings with hierarchical surface structures and low surface energy were studied. Hierarchically structured coatings were produced by using hydrophobic fumed silica nanoparticles and polytetrafluoroethylene (PTFE) microparticles as additives in polyester (PES) and polyvinyldifluoride (PVDF). These particles created hierarchical micro-nano structures on the paint surfaces and lowered or supported the already low surface energy of the paint. Two standard application techniques for paint application were employed and the presented coatings are suitable for mass production and use in large surface areas. By regulating the particle concentrations, it was possible to modify wettability properties gradually. Highly hydrophobic surfaces were achieved with the highest contact angle of 165∘. Dynamic contact angle measurements were carried out for a set of selected samples and low hysteresis was obtained. Produced coatings possessed long lasting durability in the air and in underwater conditions.

  5. Airborne concentrations of toxic metals resulting from the use of low melting point lead alloys to construct radiotherapy shielding

    International Nuclear Information System (INIS)

    McCullough, E.C.; Senjem, D.H.

    1981-01-01

    Determinations of airborne concentrations of lead, cadmium, bismuth, and tin were made above vessels containing a fusible lead alloy (158 0 F melting point) commonly used for construction of radiotherapy blocks. Fume concentrations were determined by collection on a membrane filter and analysis by atomic absorption spectrophotometry. Samples were obtained for alloy temperatures of 200 0 , 400 0 , and 600 0 F. In all instances, concentrations were much lower than the applicable occupational limits for continuous exposure. The results of this study indicate that the use of a vented hood as a means of reducing air concentrations of toxic metals above and near vessels containing low temperature melting point lead allows commonly used in construction of radiotherapy shields appears unjustifiable. However, proper handling procedures should be observed to avoid entry into the body via alternate pathways (e.g., ingestion or skin absorption). Transmission data of a non-cadmium containing lead alloy with a melting point of 203 0 F was ascertained and is reported on

  6. Neutron-induced autoradiography used in the investigation of modern pigments in paintings of known composition

    International Nuclear Information System (INIS)

    Aderhold, H.C.; Taft, W.S.

    1992-01-01

    Neutron-Induced Autoradiography is an effective analytical technique for mapping the location of a number of specified pigments in paintings. Most paintings which have been examined through neutron-induced autoradiography to date were painted prior to the introduction of the most common of modern pigments. By understanding die nuclear properties of these pigments, as revealed by this technique, a more informed analysis of modem paintings may result This investigation is part of an ongoing program to develop case studies for presentation to an undergraduate class at Cornell University, 'Art, Isotopes and Analysis'. We have found that this technique is a graphic and effective method of presenting nuclear reactions and radioactivity to non-specialists. Sample paintings are produced using pigments of known composition. A sequence of discreet layers, each a separate image, is documented in order to establish a reference for accurately interpreting the autoradiographs. The painting is then activated in the Cornell TRIGA reactor and a series of autoradiographs produced Gamma spectra taken before and after each film exposure gives us detailed information on which radioisotopes (and therefore, which pigments), are active. (author)

  7. Spectroscopic analysis of XIV century wall paintings from Patriarchate of Peć Monastery, Serbia

    Science.gov (United States)

    Marić-Stojanović, M.; Bajuk-Bogdanović, D.; Uskoković-Marković, S.; Holclajtner-Antunović, I.

    2018-02-01

    The Church of the Holy Mother of God Hodegetria in Peć is decorated with wall paintings that date from the beginning of the 14th century. In terms of style they correspond to Byzantine wall paintings from the epoch of Paleologos. The painting technique and pigment pallete has been examined on micro fragments in thin cross-sections by means of optical microscopy (OM), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) and micro- Raman spectroscopy. Use of the fresco technique and two supporting plaster layers was noted on the majority of samples, while in large blue painted areas, a combination of fresco and secco techniques was used. The SEM-EDS results showed the presence of Ca as the main component of plaster besides the traces of Si and Mg. In some samples egg white as a binder was identified. The paint film is often multilayered. Twelve pigments were identified, mainly natural earth pigments such as red ochre, yellow ochre and green earth. A mixture of pigments was used for attaining desirable optical and aesthetical impressions. As decay product only weddelite was detected in many preparatory and painted samples.

  8. Perceptual dimensions of style in paintings

    Directory of Open Access Journals (Sweden)

    Marković Slobodan

    2007-01-01

    Full Text Available The main purpose of this study is to specify the basic perceptual dimensions underlying the judgments of the physical features which define the style in paintings (e.g. salient form, colorful surface, oval contours etc.. The other aim of the study is to correlate these dimensions with the subjective (affective dimensions of the experience of paintings. In the preliminary study a set of 25 pairs of elementary perceptual descriptors were empirically specified, and a set of 25 bipolar scales were made (e.g. uncolored-multicolored. In the experiment 30 subjects judged 24 paintings (paintings were taken from the study of Radonjić and Marković, 2004 on 25 scales. Factor analysis revealed the four factors: form (scales: precise, neat, salient form etc., color (color contrast, lightness contrast, vivid colors, space (voluminosity, depth and oval contours and complexity (multicolored, ornate, detailed. Obtained factors reflected the nature of the phenomenological and neural segregation of form, color, depth processing, and partially of complexity processing (e.g. spatial frequency processing within both the form and color subsystem. The aim of the next step of analysis was to specify the correlations between two groups of judgments: (a mean judgments of 24 paintings on perceptual factors and (b mean judgments of the same set of 24 paintings on subjective (affective experience factors, i.e. regularity, attraction, arousal and relaxation (judgments taken from Radonjić and Marković, 2005. The following significant correlations were obtained: regularity-form, regularity-space, attraction-form and arousal-complexity (negative correlation. The reasons for the unexpected negative correlation between arousal and complexity should be specified in further studies.

  9. EDXRF portable system used in the analysis of altars, sculptures and paintings from XVII and XVIII centuries in Brazil

    International Nuclear Information System (INIS)

    Freitas, R.P.; Calza, C.; Lopes, R.T.; Santos, R.O.

    2011-01-01

    Full text: The preservation of cultural heritage has acquired increasing interest in the last decades and many scientific techniques have been employed to analyze paintings, manuscripts, ceramics, glasses, statues, coins and metal artifacts in order to solve problems related to restoration, conservation, dating and attribution of artworks. There is also an increasing trend for non-destructive investigations since most of the samples are unique and precious objects of art and archaeology. X-Ray fluorescence (XRF) is the most widely used investigative technique in the field of archaeometry, due to a number of favorable analytical characteristics, such as multielemental and non-destructive analysis, high sensitivity and applicability to a wide range of samples. In this work, XRF was used to analyze altars, sculptures and paintings in the Saint Anthony Convent (Rio de Janeiro, Brazil). The cornerstone of this convent was launched in 1608, by the Franciscan friars, and the construction of the church was finished in 1620. The Saint Anthony sculpture in the main altar is one of the few remaining pieces from the XVII century in Rio de Janeiro. The splendid Baroque carvings of the chapel, covered with integral gilding, in the national Portuguese style, dates from 1716 to 1719. The results obtained during the analyses have been used in the meticulous process of restoration, developed in the last two years, in order to recover the original splendour of this important piece of our cultural heritage. The analyses were carried out with an EDXRF portable system developed in the Nuclear Instrumentation Laboratory, consisting of an X-ray tube Oxford TF3005 with W anode, operating at 25 kV and 100 μA, and a Si-PIN XR-100CR detector from Amptek. In each sample were obtained several spectra, with an acquisition time of 300 s and a beam collimation of 1.5 and 2 mm. The spectra were analyzed using the software QXAS-AXIL from IAEA. The analysis of the golden carvings of the altars, in

  10. Ultrasonic backward radiation on painted rough interface

    International Nuclear Information System (INIS)

    Kwon, Yong Gyu; Yoon, Seok Soo; Kwon, Sung Duck

    2002-01-01

    The angular dependence(profile) of backscattered ultrasound was measured for steel and brass specimens with periodical surface roughness (1-71μm). Backward radiations showed more linear dependency than normal profile. Direct amplitude increased and averaging amplitude decreased with surface roughness. Painting treatment improved the linearity in direct backward radiation below roughness of 0.03. Scholte and Rayleigh-like waves were observed in the spectrum of averaging backward radiation on periodically rough surface. Painting on periodically rough surface could be used in removing the interface mode effect by periodic roughness.

  11. Failure-probability driven dose painting

    International Nuclear Information System (INIS)

    Vogelius, Ivan R.; Håkansson, Katrin; Due, Anne K.; Aznar, Marianne C.; Kristensen, Claus A.; Rasmussen, Jacob; Specht, Lena; Berthelsen, Anne K.; Bentzen, Søren M.

    2013-01-01

    Purpose: To demonstrate a data-driven dose-painting strategy based on the spatial distribution of recurrences in previously treated patients. The result is a quantitative way to define a dose prescription function, optimizing the predicted local control at constant treatment intensity. A dose planning study using the optimized dose prescription in 20 patients is performed.Methods: Patients treated at our center have five tumor subvolumes from the center of the tumor (PET positive volume) and out delineated. The spatial distribution of 48 failures in patients with complete clinical response after (chemo)radiation is used to derive a model for tumor control probability (TCP). The total TCP is fixed to the clinically observed 70% actuarial TCP at five years. Additionally, the authors match the distribution of failures between the five subvolumes to the observed distribution. The steepness of the dose–response is extracted from the literature and the authors assume 30% and 20% risk of subclinical involvement in the elective volumes. The result is a five-compartment dose response model matching the observed distribution of failures. The model is used to optimize the distribution of dose in individual patients, while keeping the treatment intensity constant and the maximum prescribed dose below 85 Gy.Results: The vast majority of failures occur centrally despite the small volumes of the central regions. Thus, optimizing the dose prescription yields higher doses to the central target volumes and lower doses to the elective volumes. The dose planning study shows that the modified prescription is clinically feasible. The optimized TCP is 89% (range: 82%–91%) as compared to the observed TCP of 70%.Conclusions: The observed distribution of locoregional failures was used to derive an objective, data-driven dose prescription function. The optimized dose is predicted to result in a substantial increase in local control without increasing the predicted risk of toxicity

  12. Three-dimensional assembly of tissue-engineered cartilage constructs results in cartilaginous tissue formation without retainment of zonal characteristics.

    Science.gov (United States)

    Schuurman, W; Harimulyo, E B; Gawlitta, D; Woodfield, T B F; Dhert, W J A; van Weeren, P R; Malda, J

    2016-04-01

    Articular cartilage has limited regenerative capabilities. Chondrocytes from different layers of cartilage have specific properties, and regenerative approaches using zonal chondrocytes may yield better replication of the architecture of native cartilage than when using a single cell population. To obtain high seeding efficiency while still mimicking zonal architecture, cell pellets of expanded deep zone and superficial zone equine chondrocytes were seeded and cultured in two layers on poly(ethylene glycol)-terephthalate-poly(butylene terephthalate) (PEGT-PBT) scaffolds. Scaffolds seeded with cell pellets consisting of a 1:1 mixture of both cell sources served as controls. Parallel to this, pellets of superficial or deep zone chondrocytes, and combinations of the two cell populations, were cultured without the scaffold. Pellet cultures of zonal chondrocytes in scaffolds resulted in a high seeding efficiency and abundant cartilaginous tissue formation, containing collagen type II and glycosaminoglycans (GAGs) in all groups, irrespective of the donor (n = 3), zonal population or stratified scaffold-seeding approach used. However, whereas total GAG production was similar, the constructs retained significantly more GAG compared to pellet cultures, in which a high percentage of the produced GAGs were secreted into the culture medium. Immunohistochemistry for zonal markers did not show any differences between the conditions. We conclude that spatially defined pellet culture in 3D scaffolds is associated with high seeding efficiency and supports cartilaginous tissue formation, but did not result in the maintenance or restoration of the original zonal phenotype. The use of pellet-assembled constructs leads to a better retainment of newly produced GAGs than the use of pellet cultures alone. Copyright © 2013 John Wiley & Sons, Ltd.

  13. Analysis of plant gums and saccharide materials in paint samples: comparison of GC-MS analytical procedures and databases.

    Science.gov (United States)

    Lluveras-Tenorio, Anna; Mazurek, Joy; Restivo, Annalaura; Colombini, Maria Perla; Bonaduce, Ilaria

    2012-10-10

    Saccharide materials have been used for centuries as binding media, to paint, write and illuminate manuscripts and to apply metallic leaf decorations. Although the technical literature often reports on the use of plant gums as binders, actually several other saccharide materials can be encountered in paint samples, not only as major binders, but also as additives. In the literature, there are a variety of analytical procedures that utilize GC-MS to characterize saccharide materials in paint samples, however the chromatographic profiles are often extremely different and it is impossible to compare them and reliably identify the paint binder. This paper presents a comparison between two different analytical procedures based on GC-MS for the analysis of saccharide materials in works-of-art. The research presented here evaluates the influence of the analytical procedure used, and how it impacts the sugar profiles obtained from the analysis of paint samples that contain saccharide materials. The procedures have been developed, optimised and systematically used to characterise plant gums at the Getty Conservation Institute in Los Angeles, USA (GCI) and the Department of Chemistry and Industrial Chemistry of the University of Pisa, Italy (DCCI). The main steps of the analytical procedures and their optimisation are discussed. The results presented highlight that the two methods give comparable sugar profiles, whether the samples analysed are simple raw materials, pigmented and unpigmented paint replicas, or paint samples collected from hundreds of centuries old polychrome art objects. A common database of sugar profiles of reference materials commonly found in paint samples was thus compiled. The database presents data also from those materials that only contain a minor saccharide fraction. This database highlights how many sources of saccharides can be found in a paint sample, representing an important step forward in the problem of identifying polysaccharide binders in

  14. An evaluation of chemical screening test kits for lead in paint

    Energy Technology Data Exchange (ETDEWEB)

    Oglesby, L.S.

    1996-04-01

    The Residential Lead-Based Paint Hazard Reduction Act (Title X) requires abatement and management of lead-based paint. The purpose of this study was to evaluate three chemical screening test kits using materials and methods from one study and subjecting the results to the statistical analysis of another. The three kits were used to predict the presence of lead in paint at ten weight concentrations from 0.04 to 3.97%. Paint was applied to four wood boards yielding a sample size of 40. Four boards were painted with lead-free paint and used as blanks. All of the boards were tested with the three test kits by an untrained individual having no knowledge of the actual lead content. Sensitivity, specificity, and false positive and negative rates were calculated for the test kit results. The manufactures` detection limits, the observed sensitivity ranged from 1.00 to 0.80, specificity ranged from 1.00 to 0.42, false positive ranged from 0 to 58%, and false negatives ranged from 0 to 20%. At the 0.5% Federal threshold level, the observed sensitivity ranged from 1.00 to 0.94, specificity ranged from 1.00 to 0.5, false positives ranged from 0 to 11.1%, and false negatives ranged from 0 to 20%. The observed false positive and false negative rates for all three kits were found to be significantly lower than those reported in a previous study. These results indicate that the kits perform very well at the Federal threshold, with two of the kits having false negative rates below 12.5% and false positive rates of 3.13%. These results indicate that these two kits would probably be acceptable screening tests for lead in paint.

  15. Using anti-corrosive paints on ships

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J

    1969-02-07

    Anit-corrosive paints on the outside of ship's hulls fall into 3 groups: the area below the water, the boot- topping area at the waterline, and the weatherwork including the hull and superstructure. Typical formulations of primer and paint are given for use in each section. Anti-corrosion paints must always be considered in conjunction with the kind and amount of surface preparation that can be given. The requirement for faster descaling techniques and higher standards of surface preparation has led to the introduction of automated centrifugal abrasive blasting machines for all new plates and sections. If it is not possible to remove old coatings by abrasive blasting, then the traditional method of chipping followed by wire brushing must be used. The removal of mill scale by abrasive blasting can produce a clean metal surface which is liable to rapid corrosion unless it is painted immediately. A pre-fabrication or shop primer is used which is normally applied by airless spray equipment synchronized with the sand blasting machinery.

  16. Rendering Visible: Painting and Sexuate Subjectivity

    Science.gov (United States)

    Daley, Linda

    2015-01-01

    In this essay, I examine Luce Irigaray's aesthetic of sexual difference, which she develops by extrapolating from Paul Klee's idea that the role of painting is to render the non-visible rather than represent the visible. This idea is the premise of her analyses of phenomenology and psychoanalysis and their respective contributions to understanding…

  17. What is lead-based paint?

    International Nuclear Information System (INIS)

    Vernon, L.S.

    1994-01-01

    The number of variety of lead-abatement regulations and requirements make it difficult and confusing to identify and properly respond to dangerous levels of lead in every situation. Definitions of ''lead-based paint'' and three test methods for lead detection are described to help determine when and how to test for the presence of lead

  18. Nabokov and the Art of Painting

    NARCIS (Netherlands)

    Vries, de Gerard J.M.; Johnson, D. Barton

    2005-01-01

    Vladimir Nabokov was one of the greatest novelists of the previous century and his mastery of English and Russian prose is unequalled. Nabokov had originally trained to become a painter and shared Marc Chagall's tutor in Paris. In Nabokov and the Art of Painting the authors demonstrate how the art

  19. Understanding Korean food culture from Korean paintings

    Directory of Open Access Journals (Sweden)

    Hae Kyung Chung

    2016-03-01

    Conclusion: Beyond the basic value of food in maximizing nutrients and energy, Korean food culture has developed distinctive cultural characteristics through more than 5,000 years of agricultural history. Although the genre paintings analyzed in this paper are limited to a certain era, this paper will serve as a milestone in providing direction for future studies.

  20. The Transdisciplinary Potential of Remediated Painting

    DEFF Research Database (Denmark)

    Petersen, Anne Ring

    2010-01-01

    the limitations of dialogic intermedia into the field of transdisciplinary aesthetics. In support of my argument, I turn to the concept of remediation as it was first applied in new media theory by Jay David Bolter and Richard Grusin. The ambition is to develop an apprehension of painting not as an artistic...

  1. The transdisciplinary potential of remediated painting

    DEFF Research Database (Denmark)

    Petersen, Anne Ring

    2011-01-01

    painting as a point of departure but moves beyond the limitations of dialogic intermedia into the field of transdisciplinary aesthetics. In support of my argument, I turn to the concept of remediation as it was first applied in new media theory by Jay David Bolter and Richard Grusin. The ambition...

  2. "The Ancient Master Painted like Me"

    Science.gov (United States)

    Chiu, Son-Mey

    2009-01-01

    By following their wonderful ideas or critical exploration, three eighth graders learned how to do traditional Chinese painting, which is taught by copying old masters' work from the Ming Dynasty in the 17th century. The standard manual, which most learners have been using for these three hundred years, is the "Mustard Seed Garden Manual of…

  3. Simulations of color development in tinted paints

    NARCIS (Netherlands)

    Stuiver, A.; Barkema, G.T.

    2010-01-01

    Monte Carlo simulations have been used to investigate how several thermodynamic and kinetic factors affect the distribution of pigments, when a water-based pigment dispersion is added to a solvent-borne paint. Our model contains three types of lattice particles: water, pigment and organic solvent,

  4. Radiocarbon dating of ancient rock paintings

    Energy Technology Data Exchange (ETDEWEB)

    Ilger, W.A.; Hyman, M.; Rowe, M.W. [Texas A and M Univ., College Station, TX (United States). Dept. of Chemistry; Southon, J. [Lawrence Livermore National Lab., CA (United States)

    1995-06-20

    This report presents progress made on a technique for {sup 14}C dating pictographs. A low-temperature oxygen plasma is used coupled with high-vacuum technologies to selectively remove C-containing material in the paints without contamination from inorganic carbon from rock substrates or accretions.

  5. Radiocarbon dating of ancient rock paintings

    International Nuclear Information System (INIS)

    Ilger, W.A.; Hyman, M.; Rowe, M.W.

    1995-01-01

    This report presents progress made on a technique for 14 C dating pictographs. A low-temperature oxygen plasma is used coupled with high-vacuum technologies to selectively remove C-containing material in the paints without contamination from inorganic carbon from rock substrates or accretions

  6. Metal soaps in oil paint : Structure, mechanisms and dynamics

    NARCIS (Netherlands)

    Hermans, J.J.

    2017-01-01

    From a chemical point of view, oil paintings are not stable objects. Visually, changes in the appearance of an oil painting might be very slow, but over the course of centuries, chemical reactions and physical processes do affect the colour, texture and integrity of oil paint layers. This thesis

  7. A Short History of the Chemistry of Painting.

    Science.gov (United States)

    Friedstein, Harriet G.

    1981-01-01

    Includes information on: (1) relationship of art and science; (2) paintings' early history; (3) Egyptian, Greek, Chinese, Byzantine, and Medieval painting; (4) chemical analysis of pigments; (5) chemistry of early pigments; and (6) paint media. Tabular data are provided on chemical names for artists' pigments with their earliest known dates. (CS)

  8. 29 CFR 1915.33 - Chemical paint and preservative removers.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Chemical paint and preservative removers. 1915.33 Section... Preparation and Preservation § 1915.33 Chemical paint and preservative removers. (a) Employees shall be protected against skin contact during the handling and application of chemical paint and preservative...

  9. Problems of increased transport load as a result of implementation of projects of high-rise constructions

    Science.gov (United States)

    Provotorov, Ivan; Gasilov, Valentin; Anisimova, Nadezhda

    2018-03-01

    The structure of problems of high-rise construction us suggested, which includes the impact on environment, design solutions, transportation problems, financial costs for construction and operation, and others. Positive and negative aspects of high-rise construction are considered. One of the basic problems of high-rise construction is the problem of increased transport load. Construction of the subway on the basis of the concession mechanism, with the use of unmanned control of rolling stock is proposed as the most expedient solution. An evaluation of the effectiveness of this project is presented, it shows quite high performance indicators for a private investor. Main problems that the project implementation may face in conditions of lack of scientific and methodological support are outlined.

  10. Mitigation of solid waste and reuse of effluent from paint and varnish automotive and industrial treated by irradiation at electron beam accelerator

    International Nuclear Information System (INIS)

    Nascimento, Fernando C.; Ribeiro, Marcia A.; Duarte, Celina Lopes; Minamidani, Pedro T.; Guzella, Catia C.

    2011-01-01

    One of the most representative industrial segments is the polymeric coatings for house paint, automotive, industrial, marine, maintenance, and repainting markets. The general consumption of paint market in 2010 was 438,364 10 3 gallons of paint, in Brazil. However, when produce paints and varnishes, various kinds of solid wastes and liquid effluent are generated. The present research focus on the effluent from resins, water base paint and paint for electrophoresis, automotive industry, and general industrial coatings. The goal of this study is to use ionizing radiation to destroy the pollutants allowing the use of part of effluent as reuse water, and the rest discarded within the specified requirements. Actual industrial effluent samples were irradiated at Electron beam Accelerator applying absorbed doses of 10 kGy, 30 kGy and 50 kGy. The results, in this preliminary stage, showed a reduction of organic compounds and suspended solids. (author)

  11. Success and failure factors in the regional health information system design process--results from a constructive evaluation study.

    Science.gov (United States)

    Nykänen, P; Karimaa, E

    2006-01-01

    To identify success and failure factors in the design process of a regional health information system. A constructive evaluation study including interviews, observations, usability study and document analysis. Modelling was found to be a key element for the successful implementation of a health information system. The developed service chain model helped to define use cases and to implement seamless service chains. User participation in the design process was a success factor resulting in good user acceptance and signs of positive impacts on work practices. Evaluation study also helped system developers to guide the system's further development. An important failure factor identified was the lack of semantic interoperability of the system components. The results emphasize the socio-technical nature of health information systems. The starting point for development should be thorough insight into the health care work practices where the information systems are to be used. Successful system design should start from modelling of work processes, data and information flows and definition of concepts and their relations. Health informatics as a scientific discipline provides theories and models for the design and development process.

  12. TRANSVERSE PHASE SPACE PAINTING FOR SNS ACCUMULATOR RING INJECTION.

    Energy Technology Data Exchange (ETDEWEB)

    BEEBE-WANG,J.; LEE,Y.Y.; RAPARIA,D.; WEI,J.

    1999-03-29

    The result of investigation and comparison of a series of transverse phase space painting schemes for the injection of SNS accumulator ring [1] is reported. In this computer simulation study, the focus is on the creation of closed orbit bumps that give desired distributions at the target. Space charge effects such as tune shift, emittance growth and beam losses are considered. The results of pseudo end-to-end simulations from the injection to the target through the accumulator ring and Ring to Target Beam Transfer (RTBT) system [2] are presented and discussed.

  13. 24 CFR 35.1320 - Lead-based paint inspections, paint testing, risk assessments, lead-hazard screens, and...

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Lead-based paint inspections, paint testing, risk assessments, lead-hazard screens, and reevaluations. 35.1320 Section 35.1320 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT...

  14. Investigating the effect of artists’ paint formulation on degradation rates of TiO2‑based oil paints

    NARCIS (Netherlands)

    van Driel, B.A.; van den Berg, K. J.; Smout, M.; Dekker, N; Kooyman, P.J.; Dik, J.

    2018-01-01

    This study reports on the effect of artists’ paint formulation on degradation rates of TiO2-based oil paints. Titanium white oil paint exists in a multitude of different recipes, and the effect of the formulation on photocatalytic binder
    degradation kinetics is unknown. These formulations

  15. 75 FR 6383 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Science.gov (United States)

    2010-02-09

    ..., Repair and Painting, and Pre- Renovation Education Activities in Target Housing and Child Occupied....C. 2682(c)(3), and a lead-based paint pre-renovation education program in accordance with section... TSCA, and a lead-based paint pre-renovation education program in accordance with section 406(b) of TSCA...

  16. Activity measurements of radon from construction materials

    Energy Technology Data Exchange (ETDEWEB)

    Fior, L.; Nicolosi Correa, J. [Federal University of Technology - Parana, UTFPR, Av. Sete de Setembro, 3165, Curitiba, PR 80230-901 (Brazil); Paschuk, S.A., E-mail: spaschuk@gmail.com [Federal University of Technology - Parana, UTFPR, Av. Sete de Setembro, 3165, Curitiba, PR 80230-901 (Brazil); Denyak, V.V. [Federal University of Technology - Parana, UTFPR, Av. Sete de Setembro, 3165, Curitiba, PR 80230-901 (Brazil); Schelin, H.R. [Federal University of Technology - Parana, UTFPR, Av. Sete de Setembro, 3165, Curitiba, PR 80230-901 (Brazil); Pele Pequeno Principe Research Institute, Av. Silva Jardim, 1632, Curitiba, PR 80250-200 (Brazil); Soreanu Pecequilo, B.R. [Institute of Nuclear and Energetic Researches, IPEN, Av. Prof. Lineu Prestes, 2242-/05508-000 Sao Paulo (Brazil); Kappke, J. [Federal University of Technology - Parana, UTFPR, Av. Sete de Setembro, 3165, Curitiba, PR 80230-901 (Brazil)

    2012-07-15

    This work presents the results of radon concentration measurements of construction materials used in the Brazilian industry, such as clay (red) bricks and concrete blocks. The measurements focused on the detection of indoor radon activity during different construction stages and the analysis of radionuclides present in the construction materials. For this purpose, sealed chambers with internal dimensions of approximately 60 Multiplication-Sign 60 Multiplication-Sign 60 cm{sup 3} were built within a protected and isolated laboratory environment, and stable air humidity and temperature levels were maintained. These chambers were also used for radon emanation reduction tests. The chambers were built in four major stages: (1) assembly of the walls using clay (red) bricks, concrete blocks, and mortar; (2) installation of plaster; (3) finishing of wall surface using lime; and (4) insulation of wall surface and finishing using paint. Radon measurements were performed using polycarbonate etched track detectors. By comparing the three layers applied to the masonry walls, it was concluded that only the last step (wall painting using acrylic varnish) reduced the radon emanation, by a factor of approximately 2. Samples of the construction materials (clay bricks and concrete blocks) were ground, homogenized, and subjected to gamma-ray spectrometry analysis to evaluate the activity concentrations of {sup 226}Ra, {sup 232}Th and {sup 40}K. The values for the index of the activity concentration (I), radium equivalent activity (Ra{sub eq}), and external hazard index (H{sub ext}) showed that these construction materials could be used without restrictions or concern about the equivalent dose limit (1 mSv/year). - Highlights: Black-Right-Pointing-Pointer Radon activity in air related to building materials was measured. Black-Right-Pointing-Pointer The index of activity concentration of building materials was evaluated. Black-Right-Pointing-Pointer The radium equivalent activity of

  17. Activity measurements of radon from construction materials.

    Science.gov (United States)

    Fior, L; Nicolosi Corrêa, J; Paschuk, S A; Denyak, V V; Schelin, H R; Soreanu Pecequilo, B R; Kappke, J

    2012-07-01

    This work presents the results of radon concentration measurements of construction materials used in the Brazilian industry, such as clay (red) bricks and concrete blocks. The measurements focused on the detection of indoor radon activity during different construction stages and the analysis of radionuclides present in the construction materials. For this purpose, sealed chambers with internal dimensions of approximately 60×60×60 cm3 were built within a protected and isolated laboratory environment, and stable air humidity and temperature levels were maintained. These chambers were also used for radon emanation reduction tests. The chambers were built in four major stages: (1) assembly of the walls using clay (red) bricks, concrete blocks, and mortar; (2) installation of plaster; (3) finishing of wall surface using lime; and (4) insulation of wall surface and finishing using paint. Radon measurements were performed using polycarbonate etched track detectors. By comparing the three layers applied to the masonry walls, it was concluded that only the last step (wall painting using acrylic varnish) reduced the radon emanation, by a factor of approximately 2. Samples of the construction materials (clay bricks and concrete blocks) were ground, homogenized, and subjected to gamma-ray spectrometry analysis to evaluate the activity concentrations of 226Ra, 232Th and 40K. The values for the index of the activity concentration (I), radium equivalent activity (Raeq), and external hazard index (Hext) showed that these construction materials could be used without restrictions or concern about the equivalent dose limit (1 mSv/year). Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. Raman Identification of Pigments in Wall Paintings of the Colonial Period from Bolivian Churches in the Ruta De La Plata

    Directory of Open Access Journals (Sweden)

    Carlos Rúa

    2018-03-01

    Full Text Available Micro-Raman spectroscopy was used to analyze and identify pigments and determine the palette of color in wall paintings from four churches of the Colonial Period, in the Bolivian highlands. The ancient churches Santiago de Callapa, Curahuara de Carangas, NuestraSeñora de Copacabana de Andamarca and San José de Soracachi were constructed during the 17th and 18th centuries, around the important colonial Ruta de la Plata, between Potosí city and Arica harbor on the Pacific coast of South America. Most pigments used in the wall paintings correspond to inorganic minerals as well as to organic colorants. Fully chlorinated copper phthalocyanine (green, copper phthalocyanine (blue, β-naphthol (yellow and benzoimidazolone (red, were identified in the corresponding colored areas suggesting subsequent recent interventions or restorations. Ground layer materials were also characterized. The present results allow for discussion of the pictorial techniques used in the Andean highland during the colonial period and allow conservators and restorers to make important decisions regarding the type of intervention to perform in the case of these important historical and patrimonial monuments.

  19. Lung cancer risk among workers in the construction industry: results from two case-control studies in Montreal.

    Science.gov (United States)

    Lacourt, Aude; Pintos, Javier; Lavoué, Jérôme; Richardson, Lesley; Siemiatycki, Jack

    2015-09-22

    Given the large number of workers in the construction industry, it is important to derive accurate and valid estimates of cancer risk, and in particular lung cancer risk. In most previous studies, risks among construction workers were compared with general populations including blue and white collar workers. The main objectives of this study were to assess whether construction workers experience excess lung cancer risk, and whether exposure to selected construction industry exposures carries excess risks. We wished to address these objectives within the sub-population of blue collar workers. Two case-control studies were conducted in Montreal. Combined, they included 1593 lung cancer cases and 1427 controls, of whom 1304 cases and 1081 controls had been blue collar workers. Detailed lifetime job histories were obtained and translated by experts into histories of exposure to chemical agents. The two key analyses were to estimate odds ratio (OR) estimates of lung cancer risk: a) for all blue-collar construction workers compared with other blue-collar workers, and b) for construction workers exposed to each of 20 exposure agents found in the construction industry compared with construction workers unexposed to those agents. All analyses were conducted using unconditional logistic regression adjusted for socio-demographic factors and smoking history. The OR for all construction workers combined was 1.11 (95 % CI: 0.90-1.38), based on 381 blue collar construction workers. Analyses of specific exposures were hampered by small numbers and imprecise estimates. While none of 20 occupational agents examined was significantly associated with lung cancer, the following agents manifested non-significantly elevated ORs: asbestos, silica, Portland cement, soil dust, calcium oxide and calcium sulfate. Compared with other blue collar workers, there was only a slight increased risk of lung cancer for subjects who ever held an occupation in the construction industry. The analyses of

  20. Family resilience – definition of construct and preliminary results of the Polish adaptation of the Family Resilience Assessment Scale (FRAS

    Directory of Open Access Journals (Sweden)

    Natalia Nadrowska

    2017-05-01

    Full Text Available Background The article describes construct of family resilience with the main focus on the model Walsh. The aim of this article is to present preliminary results: adaptation, reliability, statistical analyses of the Family Resilience Assessment Scale (FRAS for the Polish population. Participants and procedure Participants (n = 329, aged 18-35, completed experimental Polish version of the FRAS (SPR – Skala Prężności Rodzinnej. In the procedure of adaptation, scale was translated and modified into Polish. Scale consists of the following subscales: Family Communication and Problem Solving, Utilizing Social and Economic Resources, Maintaining a Positive Outlook, Family Connectedness, Family Spirituality and Ability to Make Meaning of Adversity. Results The reliability of the experimental Polish version of the FRAS for the entire scale and five subscales are satisfactory. Only subscale Ability to Make Meaning of Adversity obtained reliability of less than 0.7. Taking into account the diversity of gender and declaring the passage through the difficult events were observed significant differences in the three scales: Family Communication and Problem Solving, Family Connectedness, Ability to Make Meaning of Adversity and total scale of FRAS. Conclusions The work on the questionnaire is still in progress and the results presented here should be considered as preliminary. In the next steps, the number of men should be increased in order to perform confirmatory factor analysis. Future studies should take into account a number of factors and contexts (e.g. family structure, social and cultural context and the type of stressful event.

  1. Thermal paint production: the techno-economic evaluation of muscovite as insulating additive.

    Directory of Open Access Journals (Sweden)

    Gabriela Fernandes Ribas

    2016-09-01

    Full Text Available Muscovite is known by its thermal and electrical insulating properties. Based on this, it was hypothesized that its addition on paints should increase the thermal resistance. The use of muscovite as mineral insulating is pointed out as advantageous due to its low cost compared to other materials used for this purpose, such as the ceramic microsphere. The use of a low cost material could open the access to the medium and low income families, implying two aspects: the life quality increase by thermal comfort and the increase of energy saving. Thus, this part of the population could open a new market to thermal paints. Aiming to contribute to this issue, this work evaluated the thermal insulation performance of commercial paints containing muscovite additions and determined the economic evaluation for its industrial production. The thermal paint was formulated by adding 10%, 20% and 40% of muscovite to the commercial paint. This was applied on steel reinforced mortar boards. Thermal insulation tests were carried out in bench scale using an adapted box. The economic evaluation of the industrial production of muscovite-based thermal paint was conducted, considering the Brazilian economic market in this activity. The results showed its ability as an insulating agent due to a reduction of 0.667 °C/mm board by the addition of 40% muscovite. The economic analysis also demonstrated the feasibility of the thermal paint industrial production. The payback is favorable to 5 years when compared to the Selic short-term lending rate, with 21.53% of internal rate return and a net present value of US$ 15,085.76.

  2. Novel paint design based on nanopowder to protection against X and gamma rays

    International Nuclear Information System (INIS)

    Movahedi, Mohammad Mehdi; Abdi, Adibe; Mehdizadeh, Alireza; Dehghan, Naser; Heidari, Emad; Masumi, Yusef; Abbaszadeh, Mojtaba

    2014-01-01

    Lead-based shields are the standard method of intraoperative radiation protection in the radiology and nuclear medicine department. Human lead toxicity is well documented. The lead used is heavy, lacks durability, is difficult to launder, and its disposal is associated with environmental hazards. The aim of this study was to design a lead free paint for protection against X and gamma rays. In this pilot st we evaluated several types of nano metal powder that seemed to have good absorption. The Monte Carlo code, MCNP4C, was used to model the attenuation of X-ray photons in paints with different designs. Experimental measurements were carried out to assess the attenuation properties of each paint design. Among the different nano metal powder, nano tungsten trioxide and nano tin dioxide were the two most appropriate candidates for making paint in diagnostic photon energy range. Nano tungsten trioxide (15%) and nano tin dioxide (85%) provided the best protection in both simulation and experiments. After this step, attempts were made to produce appropriate nano tungsten trioxide-nano tin dioxide paints. The density of this nano tungsten trioxide-nano tin dioxide paint was 4.2 g/cm 3 . The MCNP simulation and experimental measurements for HVL (Half-Value Layer) values of this shield at 100 kVp were 0.25 and 0.23 mm, respectively. The results showed the cost-effective lead-free paint can be a great power in absorbing the X-rays and gamma rays and it can be used instead of lead

  3. The socio-economic impacts on regional areas as a result of new nuclear construction and nuclear decommissioning

    International Nuclear Information System (INIS)

    Devine, J. Michael

    2010-01-01

    Large social and economic impacts are caused by new nuclear construction and eventual shutdown of operations and decommissioning. When new construction begins, the impact on the local area is enormous. The influx of construction workers and businesses to provide services and goods usually overwhelms the area which previously may have had a minimal amount of infrastructure and little population. Also, given that many of the current nuclear facilities worldwide are located in somewhat remote regions, they have become the primary source of jobs for those regions. When these facilities shut down and go into decommissioning, there can be several adverse effects upon the region or area. This paper will address some of the primary socio-economic influences of both new nuclear construction and subsequent decommissioning. (author)

  4. Is the apparent decrease in injury and illness rates in construction the result of changes in reporting?

    Science.gov (United States)

    Welch, Laura S; Dong, Xiuwen; Carre, Francoise; Ringen, Knut

    2007-01-01

    Injury rates in all industries and in construction in particular have been declining. Inconsistencies in the information suggest some of the apparent decrease may be due to changes in the ways injuries are treated, misclassification of employees, or underreporting. Lost-time injury rates for the largest construction employers declined by as much as 92% between 1988 and 1999. Yet the rate for cases with restricted work activity actually increased from 0.7 to 1.2 per 100 full-time workers between 1990 and 2000, and fatalities among construction workers remain high. In Massachusetts, at least 14% of construction employers misclassified workers as independent contractors, with the effect that injuries to these workers are not recordable. Studies that compare OSHA logs with other data sources find that the OSHA logs do not include a significant proportion of injuries and illnesses identified elsewhere.

  5. Hazardous properties of paint residues from the furniture industry.

    Science.gov (United States)

    Vaajasaari, Kati; Kulovaara, Maaret; Joutti, Anneli; Schultz, Eija; Soljamo, Kari

    2004-01-30

    The objective of this study was to screen nine excess paint residues for environmental hazard and to evaluate their disposability in a non-hazardous or hazardous-waste landfill. These residues were produced in the process of spray-painting furniture. Residues were classified according to their leaching and ecotoxicological properties. Leaching properties were determined with the European standard SFS-EN 12457-2 leaching-test. The toxicity of the leaching-test eluates was measured with plant-, bacteria- and enzyme-inhibition bioassays. Total organic carbon, formaldehyde and solvent concentrations in the solid wastes and in the leaching-test eluates were analysed. It seemed likely that leached formaldehyde caused very high acute toxicity in leaching-test eluates of the dry-booth residues. This hypothesis was based on the fact that the formaldehyde concentrations in the leaching-test eluates of the dry-booth residues were 62-75 times higher than the EC50 value reported in the literature for formaldehyde. The results of the water-curtain booth residues showed that the samples with the highest TOC and aromatic solvent concentrations were also the most toxic. The studied excess paint residues were complex organic mixtures and contained large amounts of compounds not identifiable from chemical data. Therefore, the evaluation of the hazard based solely on available chemical data is unlikely to be sufficient, as evidenced by our study. Our results show that harmful compounds remain in the solid waste and the toxicity results of their leaching-test eluates show that toxicity may leach from residues in contact with water at landfill sites. They also confirm the benefit of combining chemical and ecotoxicological assays in assessing the potential environmental hazard of complex organic mixtures found in wastes. Copyright 2003 Elsevier B.V.

  6. Internal contamination by tritium caused by radioluminescent paints

    Energy Technology Data Exchange (ETDEWEB)

    Adamiak-Ziemba, J.; Doniec, J.

    1985-01-01

    The internal contamination investigations covered 23 persons using radioluminescence paints containing tritium, assembling devices painted with those paints, and those having no contact with active paints but working next to the painting room. Determined were concentrations of tritium excreted with urine, air contamination at workplaces, contamination of workplace areas and hand skin. At the time covered by the investigations, the mean annual equivalent doses for those using tritium paints were reduced from 14-20 mSv to about 5 mSv. In those working next to the painting room they were reduced from 5.8-15 to 0.23 mSv. The exposure of those assembling the devices does not exceed 1 mSv. It was demonstrated that the main cause of the tritium exposure level was air contamination in working rooms.

  7. The original appearance of the painted room in the Martenahuis in Franeker

    Directory of Open Access Journals (Sweden)

    Ige Verslype

    2017-09-01

    Full Text Available The Martenahuis in Franeker contains a special room whose walls and ceiling are decorated with vast paintings on canvas. Such fully painted rooms were very popular in the northern Dutch provinces from the last quarter of the seventeenth century and were called ‘painted rooms’ or ‘rooms in the round’. Owing to later additions and alterations, the painted room in the Martenahuis presents a disjointed picture today. The room’s original appearance has been reconstructed with the help of material-technical, art-historical and archival research. It transpires that all the elements of the room were meticulously coordinated with one another, which provides insight into the intentions of the client and the artists involved.The now white-painted flat wooden architectural elements were originally painted with a reddish-brown trompe l’oeil representation which, together with the paintings inserted into them, created the illusion of a richly decorated classical pavilion overlooking Arcadian landscapes. Technical research revealed – in contrast to what the literature had previously suggested – that all the landscape hangings, as well as the central ceiling piece and the eight original wainscot paintings, were part of a single series made especially for this room. Archival research has shown that the room came into being in or shortly after 1701, following the departure in August 1701 of the young Frisian stadholder Johan Willem Friso (1687-1711, who had stayed there while studying at Franeker University. The construction of the room was part of a large-scale renovation commissioned by the wealthy regent Suffridus Westerhuis (1668-1731, who had acquired the building in 1694. Various prints by the French architect Daniel Marot (1661-1752 served as inspiration for the room’s design. Those designs were all published before 1703. There are no elements dating back to Marot’s inventions from or after 1703, such as those included in his collected

  8. Resulting long-term intestinal motility in dogs following construction of a reversed jejunal segment after extensive small bowel resection.

    Science.gov (United States)

    Uchiyama, M; Iwafuchi, M; Ohsawa, Y; Yagi, M; Iinuma, Y; Ohtani, S

    1994-10-01

    To evaluate the long-term function and effective motility of a reversed jejunal segment after extensive small bowel resection, the authors continuously measured postoperative bowel motility during interdigestive and postprandial periods in conscious dogs 6 to 10 months after surgery. The long-term findings were compared with previously reported short-term results measured 2 to 4 weeks after the operation. In the long-term follow-up dogs with a 20-cm reversed jejunal segment constructed after extensive (75% to 80%) small bowel resection, the fasting duodenal migrating myoelectric (or motor) complex (MMC) was often interrupted in the jejunum above the reversed segment, and did not migrate smoothly to the reversed segment or terminal ileum. The MMCs arising from the duodenum predominantly propagated to the ileum through the inherent anatomic continuity of the bowel. In addition, brief small discordant contractions were frequent in the reversed segment and the jejunum, above the proximal anastomosis. These findings are similar to those of the MMC propagation pattern noted 2 to 4 weeks after surgery. However, the postprandial duration without duodenal MMC activity was significantly shorter in the dogs with long-term follow-up than in those with short-term follow-up (both were longer than in control dogs). Marked dilatation of the jejunum and reversed jejunal segment was noted across the proximal anastomosis. These results suggest that the transit time and passage of intestinal contents can be delayed and stagnated for at least 10 months after extensive small bowel resection with a 20-cm reversed jejunal segment.(ABSTRACT TRUNCATED AT 250 WORDS)

  9. Polyvinyl Alcohol-Lead Nitrate Paint for Gamma Radiation Installations

    International Nuclear Information System (INIS)

    EI-Ahdal, M.A.

    2007-01-01

    Dealing with gamma ray installations represents an important problem for radiation protection workers. Radiation shielding is used to avoid the risk resulting from these gamma sources. This study suggested the use of polyvinyl alcohol (PVA) solution that contains lend nitrate (with lead metal/PVA= 1.72) to lower the gamma radiation intensity and reduce its risk to workers. This can be achieved by painting the radiation shielding with this solution Temperature relief of the irradiated solution shows the degradation of the polymer content up to 50 degree C, which starts to crosslink increasing the protection capability of this solution

  10. Age determination of paintings by 210Pb method

    International Nuclear Information System (INIS)

    Gilot, E.; Apers, D.

    1977-01-01

    Often the 210 Pb method for age determination of paintings is inoperative because the initial 210 Pb activity of undated lead oxide cannot be determined. This difficulty could be removed if the ores could be identified from which the lead white was prepared. It would be possible to measure the initial 210 Pb activity directly in Pb ores or in identical Pb oxides from properly dated pictures. Some results show that Pb ores can be identified by the isotope ratios 206 Pb/ 204 Pb, 207 Pb/ 204 Pb, 208 Pb/ 204 Pb. A systematic study of Pb ores and pigment isotopic composition is necessary. (author)

  11. High-resolution non-invasive 3D imaging of paint microstructure by synchrotron-based X-ray laminography

    International Nuclear Information System (INIS)

    Reischig, Peter; Helfen, Lukas; Wallert, Arie; Baumbach, Tilo; Dik, Joris

    2013-01-01

    The characterisation of the microstructure and micromechanical behaviour of paint is key to a range of problems related to the conservation or technical art history of paintings. Synchrotron-based X-ray laminography is demonstrated in this paper to image the local sub-surface microstructure in paintings in a non-invasive and non-destructive way. Based on absorption and phase contrast, the method can provide high-resolution 3D maps of the paint stratigraphy, including the substrate, and visualise small features, such as pigment particles, voids, cracks, wood cells, canvas fibres etc. Reconstructions may be indicative of local density or chemical composition due to increased attenuation of X-rays by elements of higher atomic number. The paint layers and their interfaces can be distinguished via variations in morphology or composition. Results of feasibility tests on a painting mockup (oak panel, chalk ground, vermilion and lead white paint) are shown, where lateral and depth resolution of up to a few micrometres is demonstrated. The method is well adapted to study the temporal evolution of the stratigraphy in test specimens and offers an alternative to destructive sampling of original works of art. (orig.)

  12. Electrical charging characteristics of the hetero layer film for reducing water-borne paint contamination in electrostatic rotary atomizers

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Y.; Imanishi, T.; Yoshida, O.; Mizuno, A. [ABB Japan, Tokyo (Japan)

    2010-07-01

    The electrostatic rotary atomizer is the most efficient of all liquid spray painting methods. Its use minimizes the waste of paint and reduces emissions of volatile organic compounds (VOCs). Water-borne painting processes which use water-soluble paint also reduce VOC emissions, but the atomizer body is easily contaminated by the paint mists. The Institute of Electrical and Electronics Engineers (IEEE) considered the causes of water-borne paint contamination and presented the experimental results of a contamination proof system in which the atomizer is surrounded by the repelling film that is charged and repels the incoming paint droplets. Among the key factors for repelling film were electrical properties, such as low capacitance and high insulation to keep high surface potential. Charging uniformity was found to be among the most important characteristic to avoid contamination. The pulse electro-acoustic (PEA) method was used to check these features using space charge measurements inside the repelling film. It was concluded that hetero layer films have more uniform charging characteristics than single layer films.

  13. FTIR ANALYSIS OF PAINTING MATERIALS FROM THE CHURCH SAINT PARASCHIVA, OF POIENILE IZEI, MARAMUREŞ, ROMANIA

    Directory of Open Access Journals (Sweden)

    Constantin MARUŢOIU

    2011-03-01

    Full Text Available This paper presents the research and the t results of FTIR analyses on samples of immobile paintings on the wooden walls, taken from the Church Saint Paraschiva from the Village of Poienile Izei, county of Maramureş,Romania, a UNESCO World Heritage List monument. These analyses were meant to certify the type and origin of the materials used in the grounding and paint layers of the late 18th c. pictures inside this wooden church. The results obtained, revealed us that other materials had been used than expected. Results also can help in the future conservation-restoration intervention, especially in cleaning and retouching.

  14. THE MONITORING AND ANALYSIS OF THE CHINESE TRADITIONAL ARCHITECTURE PAINTING DECAY – THE CASE OF JILAN PAVILION IN THE SUMMER PALACE

    Directory of Open Access Journals (Sweden)

    L. Zhan

    2017-08-01

    Full Text Available The painting is one of the most decorative elements of ancient Chinese architecture and it is sensitive to the natural environment. The outdoor painting is very easily to be affected by the natural environment and its color is easily to decay. In order to study the relationship between the painting decay and the physical environment, the two paintings on both east and west inner eaves of Jilan Pavilion beside the Kunming Lake in Summer Palace are taken as the research objects, because these two paintings are painted at the same period but their decay degrees are greatly different. Since 2013, the research group regularly monitors the color decay of these two paintings. Meanwhile, the physical environment around these two paintings has been monitored. Based on the analysis of the monitor data, it can be seen that the illumination is the major factor that causes the decay of the painting. Meanwhile, by using the ECOTECT software to stimulate the light environment around the Jilan Pavilion, it can be seen that it is the mirror reflection of the lake that causes the result that the illumination of the west eave (face east is stronger than that of the east eave (face west.

  15. NASA logo painted on orbiter Endeavour

    Science.gov (United States)

    1998-01-01

    A KSC worker paints the NASA logo on the port wing of the orbiter Endeavour, which is scheduled to launch in December for STS-88. The paint is a special pigment that takes 18 hours to dry; the whole process takes approximately two weeks to complete. The NASA logo, termed 'meatball,' was originally designed in the late 1950s. It symbolized NASA's role in aeronautics and space in the early years of the agency. The original design included a white border surrounding it. The border was dropped for the Apollo 7 mission in October 1968, replaced with royal blue to match the background of the emblem. In 1972 the logo was replaced by a simple and contemporary design -- the 'worm' -- which was retired from use last year. NASA reverted to its original logo in celebration of the agency's 40th anniversary in October, and the 'golden age' of America's space program. All the orbiters will bear the new logo.

  16. Water-Based Pressure Sensitive Paint

    Science.gov (United States)

    Oglesby, Donald M.; Ingram, JoAnne L.; Jordan, Jeffrey D.; Watkins, A. Neal; Leighty, Bradley D.

    2004-01-01

    Preparation and performance of a water-based pressure sensitive paint (PSP) is described. A water emulsion of an oxygen permeable polymer and a platinum porphyrin type luminescent compound were dispersed in a water matrix to produce a PSP that performs well without the use of volatile, toxic solvents. The primary advantages of this PSP are reduced contamination of wind tunnels in which it is used, lower health risk to its users, and easier cleanup and disposal. This also represents a cost reduction by eliminating the need for elaborate ventilation and user protection during application. The water-based PSP described has all the characteristics associated with water-based paints (low toxicity, very low volatile organic chemicals, and easy water cleanup) but also has high performance as a global pressure sensor for PSP measurements in wind tunnels. The use of a water-based PSP virtually eliminates the toxic fumes associated with the application of PSPs to a model in wind tunnels.

  17. Methylisothiazolinone and benzisothiazolinone are widely used in paint: a multicentre study of paints from five European countries

    DEFF Research Database (Denmark)

    Schwensen, Jakob F; Lundov, Michael; Bossi, Rossana

    2015-01-01

    were found in paints from all five countries. Paints purchased in Denmark and Sweden contained especially high concentrations of BIT. CONCLUSION: The use of MI across European countries is extensive. In view of the ongoing epidemic of MI contact allergy, an evaluation of the safety of MI in paints......BACKGROUND: In view of the current epidemic of contact allergy to methylisothiazolinone (MI), it is important to clarify the extent of use of MI and related isothiazolinones in paints currently available for the consumer and worker in Europe. OBJECTIVES: To elucidate the use and concentrations...... of MI, methylchloroisothiazolinone (MCI) and benzisothiazolinone (BIT) in paints on the European retail market. METHODS: Wall paints (n = 71) were randomly purchased in retail outlets in five European countries. The paints were quantitatively analysed for their contents of MI, MCI and BIT by high...

  18. Colour Dematerialization in Spiritual Literature and Painting

    OpenAIRE

    Sudrajat, Dadang; Piliang, Yasraf Amir; Sanjaya, Tisna; Kusmara, Andriyanto Rikrik

    2017-01-01

    Colour in variety of art expression can be interpreted differently. This study is aiming at analyzing the colour dematerialization of Javanese spiritual literature “Falsafah Jeroning Warna” by Suprapto Kadis and a painting by Ahmad Sadali entitled “Gunung Mas”. Research was done by employing qualitative research, while data was collected by observation, interview, discussion, and documentation study. The analysis of meanings in the two art works was done in descriptive way by using the theory...

  19. Understanding Korean food culture from Korean paintings

    OpenAIRE

    Hae Kyung Chung; Kyung Rhan Chung; Hung Ju Kim

    2016-01-01

    Background: In Korea, there are many traditional foods that have developed along with the country's rich history. In addition, various food cultures have developed through agricultural traditions, ritual ceremonies, and the sharing of affection. Paintings, works of calligraphy, and music demonstrate some of these cultural characteristics of Korean foods. Further research and analysis of Korean food culture using these data sources is currently underway. Methods: This paper focuses on the c...

  20. 'Weightless' acrylic painting by Jack Kroehnke

    Science.gov (United States)

    1987-01-01

    'Weightless' acrylic painting by Jack Kroehnke depicts STS-26 Discovery, Orbiter Vehicle (OV) 103, Mission Specialist (MS) David C. Hilmers participating in extravehicular activity (EVA) simulation in JSC Weightless Environment Training Facility (WETF) Bldg 29. In the payload bay (PLB) mockup, Hilmers, wearing extravehicular mobility unit (EMU), holds onto the mission-peculiar equipment support structure in foreground while SCUBA-equipped diver monitors activity overhead and camera operator records EVA procedures. Copyrighted art work for use by NASA.

  1. Painting radioprotection at the nuclear eve

    International Nuclear Information System (INIS)

    Portelli, Aurelien; Travadel, Sebastien; Guarnieri, Franck; Parizel, Claire

    2017-01-01

    The CEA Marcoule centre is one of the first pillar of the French nuclear industry. The radiation protection department (SPR) of the centre benefited from the artistic skill of Jacques Castan who illustrated the safety campaigns of the SPR since 1959 and fed an imagination about radiation protection. His most ambitious creation was a wall painting in a staircase, made in 1962. This article describes the symbolic meaning of this work of art, which is today missing

  2. Intumescent paint as fire protection coating

    Directory of Open Access Journals (Sweden)

    R. B. R.S. OLIVEIRA

    Full Text Available Abstract This paper is a compendium on intumescent paint and its main features regarding chemical composition, thermophysical properties and performance as a fire-retardant material. Some of the main technical publications and lines of research on the subject are presented herein. The purpose of this paper is to show the current stage of the technical research being conducted on the topic and enable a better understanding of this fire-retardant material.

  3. Presence of lead in paint of toys sold in stores of the formal market of Bogotá, Colombia.

    Science.gov (United States)

    Mateus-García, A; Ramos-Bonilla, J P

    2014-01-01

    Lead (Pb) is a non-essential metal. Exposure to lead has been associated with adverse health effects in both children and adults. Lead content in paint used in toys or children's products has been identified as both a potential and preventable source of childhood lead exposure. Twenty-four stores located in Bogotá (Colombia) were selected by cluster sampling to participate in the study. A random sample of 96 toys was purchased at these stores. Since one toy can have different paint colors, a total of 116 paint samples from 96 toys were analyzed for lead content. Paint samples were prepared by microwave digestion and lead was quantified using ICP-OES. For quality control purposes of the analytical method, spike samples and a certified reference material (NIST SRM 2582) were used. The lead content in paint ranged from below the method detection limit (5ppm) to 47,600ppm, with an average Pb concentration of 1024ppm and a median concentration of 5ppm. Eight (8) paint samples removed from five toys had lead concentrations exceeding the US regulatory limit for total lead content (90ppm). Brown paint and toys manufactured in Colombia were significantly associated with high concentrations of lead in paint. Furthermore, a statistically significant interaction between these two variables was also found. The results suggest that there is a potential risk of lead exposure from paint of toys sold in the formal market of Bogotá. Therefore, the implementation of a national surveillance program of lead content in children products is urgently needed. The risk of children's lead exposure identified in this study, which is completely preventable, could be present also in other developing countries. © 2013 Published by Elsevier Inc.

  4. External beam PIXE analysis of painting

    International Nuclear Information System (INIS)

    Pascholati, Paulo R.; Rizzutto, Marcia A.; Barbosa, Marcel D.L.; Albuquerque, Cindy

    2005-01-01

    The preservation and conservation of mankind cultural heritage has become an important issue worldwide. Non-destructive analytical techniques are suitable, for example, to analyze precious and unique objects of art and archaeology. Among those techniques Particle Induced X-Ray Emission (PIXE) has good advantage to identify elemental composition present in these kinds of objects. The Laboratorio de Analise de Materiais por Feixes Ionicos-LAMFI of the Institute of Physics of the University of Sao Paulo has been installed an external beam facility for PIXE analysis. This new setup is being used for the analysis of archaeological pottery artifacts, paintings and biological tissues (teeth and bones), which are not compatible with the high vacuum of the regular PIXE target chamber. In addition most art and archaeological objects are too large for the evacuated analysis chamber. Applications of this facility will be presented in the analysis of one painting of the beginning of the last century. The chemical elements identified in the painting were Ca, Ti, Cr, Cu, Fe, Zn, Pb and Ba. The PIXE measurements were done non-destructively and no visible damage was observed on the irradiated object. (author)

  5. Impact Verification of Aerogel Insulation Paint on Historic Brick Facades

    Science.gov (United States)

    Ganobjak, Michal; Kralova, Eva

    2017-10-01

    Increasing the sustainability of existing buildings is being motivated by reduction of their energy demands. It is the above all the building envelope and its refurbishment by substitution or addition of new materials that makes the opportunity for reduction of energy consumption. A special type of refurbishment is conservation of historical buildings. Preservation of historic buildings permits also application of innovative methods and materials in addition to the original materials if their effects are known and the gained experience ensures their beneficial effect. On the market, there are new materials with addition of silica aerogel in various forms of products. They are also potentially useful in conservation of monuments. However, the effects of aerogel application in these cases are not known. For refurbishment is commercially available additional transparent insulation paint - Nansulate Clear Coat which is containing aerogel and can be used for structured surfaces such as bricks. A series of experiments examined the thermo-physical manifestation of an ultra-thin insulation coating of Nansulate Clear Coat containing silica aerogel on a brick facade. The experiments of active and passive thermography have observed effects of application on the small-scale samples of the brick façade of a protected historical building. Through a series of experiments were measured thermal insulation effect and influence on the aesthetic characteristics such as change in colour and gloss. The treated samples were compared to a reference. Results have shown no thermal-insulating manifestation of the recommended three layers of insulation paint. The three layers recommended by the manufacturer did not significantly affect the appearance of the brick facade. Color and gloss were not significantly changed. Experiments showed the absence of thermal insulation effect of Nansulate transparent triple coating. The thermal insulation effect could likely be reached by more layers of

  6. Chromosome painting in the manatee supports Afrotheria and Paenungulata

    Directory of Open Access Journals (Sweden)

    Zori Roberto T

    2007-01-01

    Full Text Available Abstract Background Sirenia (manatees, dugongs and Stellar's sea cow have no evolutionary relationship with other marine mammals, despite similarities in adaptations and body shape. Recent phylogenomic results place Sirenia in Afrotheria and with elephants and rock hyraxes in Paenungulata. Sirenia and Hyracoidea are the two afrotherian orders as yet unstudied by comparative molecular cytogenetics. Here we report on the chromosome painting of the Florida manatee. Results The human autosomal and X chromosome paints delimited a total of 44 homologous segments in the manatee genome. The synteny of nine of the 22 human autosomal chromosomes (4, 5, 6, 9, 11, 14, 17, 18 and 20 and the X chromosome were found intact in the manatee. The syntenies of other human chromosomes were disrupted in the manatee genome into two to five segments. The hybridization pattern revealed that 20 (15 unique associations of human chromosome segments are found in the manatee genome: 1/15, 1/19, 2/3 (twice, 3/7 (twice, 3/13, 3/21, 5/21, 7/16, 8/22, 10/12 (twice, 11/20, 12/22 (three times, 14/15, 16/19 and 18/19. Conclusion There are five derived chromosome traits that strongly link elephants with manatees in Tethytheria and give implicit support to Paenungulata: the associations 2/3, 3/13, 8/22, 18/19 and the loss of the ancestral eutherian 4/8 association. It would be useful to test these conclusions with chromosome painting in hyraxes. The manatee chromosome painting data confirm that the associations 1/19 and 5/21 phylogenetically link afrotherian species and show that Afrotheria is a natural clade. The association 10/12/22 is also ubiquitous in Afrotheria (clade I, present in Laurasiatheria (clade IV, only partially present in Xenarthra (10/12, clade II and absent in Euarchontoglires (clade III. If Afrotheria is basal to eutherians, this association could be part of the ancestral eutherian karyotype. If afrotherians are not at the root of the eutherian tree, then the 10

  7. Conservation of Paintings. Chapter 2

    International Nuclear Information System (INIS)

    Panczyk, E.

    2011-01-01

    Ever since Martin Heinrich Klaproth (1743-1817) performed a chemical analysis of the terracotta from Tiberius's villa on the island of Capri for the first time at the end of the eighteenth century, more and more sensitive and mutually complementary physicochemical methods are being developed to study works of art and archaeological artefacts. Technological studies, studies of manufacturing techniques, of the appearance of ageing and methods for determining the age of objects are performed, firstly, to determine the authenticity of works of art, secondly, to obtain information on the technology and techniques that were used by a given master, and, thirdly, to indicate the optimum conservation techniques that should be used during renovation and conservation work of a given object. The selection of the research method used must each time be well thought out, taking into consideration mainly the purpose of the test and the nature of the tested object. For a long time now, nuclear techniques have been considered to be one of the most important research techniques for identifying works of art, due to their great sensitivity and the possibility of discovering features that are invisible to the naked eye. These methods can generally be divided into three categories: (i) The first category covers various radiography techniques such as X ray radiography, xeroradiography, computed tomography, thermal neutron induced autoradiography, X ray induced autoelectronography, gamma radiography and neutronography. These make it possible to obtain information on the internal construction of an object, they do not require that samples be collected from the object and, in this sense, are nondestructive methods. The information obtained from this type of research often comprises basic information on the object which may be expanded and supplemented using other methods. (ii) The second category includes all the analytical techniques using nuclear techniques which allow microelements to be

  8. Density determination of nail polishes and paint chips using magnetic levitation

    Science.gov (United States)

    Huang, Peggy P.

    Trace evidence is often small, easily overlooked, and difficult to analyze. This study describes a nondestructive method to separate and accurately determine the density of trace evidence samples, specifically nail polish and paint chip using magnetic levitation (MagLev). By determining the levitation height of each sample in the MagLev device, the density of the sample is back extrapolated using a standard density bead linear regression line. The results show that MagLev distinguishes among eight clear nail polishes, including samples from the same manufacturer; separates select colored nail polishes from the same manufacturer; can determine the density range of household paint chips; and shows limited levitation for unknown paint chips. MagLev provides a simple, affordable, and nondestructive means of determining density. The addition of co-solutes to the paramagnetic solution to expand the density range may result in greater discriminatory power and separation and lead to further applications of this technique.

  9. Painted surfaces - Important sources of polychlorinated biphenyls (PCBs) contamination to the urban and marine environment

    International Nuclear Information System (INIS)

    Jartun, Morten; Ottesen, Rolf Tore; Steinnes, Eiliv; Volden, Tore

    2009-01-01

    A study of a large number of samples of flaking old paint from various buildings in Bergen, Norway (N = 68) suggests that paint may be the most important contemporary source of PCBs in this urban environment with concentrations of PCB 7 up to 3.39 g/kg. Twenty-three of the samples were collected from a single building, and the concentrations were found to vary over 3 orders of magnitude. In addition, 16 concrete samples from a large bridge previously coated with PCB-containing paint were collected and separated into outer- and inner samples indicating that PCBs are still present in high concentrations subsequent to renovation. PCBs were found in several categories of paint from wooden and concrete buildings, potentially introduced to the environment by natural weathering, renovation, and volatilization. Consequently, this dispersion may lead to increased levels of PCBs in urban atmospheres, soils, and harbor sediments where high concentrations have resulted in Governmental advice against consumption of certain seafood. - Paint from structures built during the period 1950-1970 may be the most important source of PCBs in an urban environment

  10. Studies on irradiation resisting paints for concrete structures in nuclear power plant, 4

    International Nuclear Information System (INIS)

    Kita, Daizo; Sumino, Masahiro; Goto, Tomoaki.

    1978-01-01

    It is necessary for irradiation resisting paints to adhere tightly to concrete in order to exhibit superior effects. Adhesion of paints to concrete is greatly affected by moisture content and the form of moisture in concrete. Further, adhesion will probably be affected by differences in concrete surface conditions between floors, walls and ceilings. Therefore, experiments were conducted with concrete to make clear allowable moisture conditions and the influence of these concrete surfaces. The following results were obtained. (1) Adhesion of paint becomes stronger as pF-value increases, that is, as moisture content falls. (2) The allowable pF-values and moisture contents were respectively 5.5 over and 4.5% under at floor, 4.4 over and 4.9% under at wall, and 4.3 over and 5% under at ceiling. (3) Fractures of paint films under these allowable conditions occurred in paint-concrete composites, and the fractured concrete thickness than was 0.5-0.8 mm and measured adhesion strength was 33 kg/cm 2 . (auth.)

  11. Computer analysis of ATR-FTIR spectra of paint samples for forensic purposes

    Science.gov (United States)

    Szafarska, Małgorzata; Woźniakiewicz, Michał; Pilch, Mariusz; Zięba-Palus, Janina; Kościelniak, Paweł

    2009-04-01

    A method of subtraction and normalization of IR spectra (MSN-IR) was developed and successfully applied to extract mathematically the pure paint spectrum from the spectrum of paint coat on different bases, both acquired by the Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) technique. The method consists of several stages encompassing several normalization and subtraction processes. The similarity of the spectrum obtained with the reference spectrum was estimated by means of the normalized Manhattan distance. The utility and performance of the method proposed were tested by examination of five different paints sprayed on plastic (polyester) foil and on fabric materials (cotton). It was found that the numerical algorithm applied is able - in contrast to other mathematical approaches conventionally used for the same aim - to reconstruct a pure paint IR spectrum effectively without a loss of chemical information provided. The approach allows the physical separation of a paint from a base to be avoided, hence a time and work-load of analysis to be considerably reduced. The results obtained prove that the method can be considered as a useful tool which can be applied to forensic purposes.

  12. Occupational hazards and safety measures amongst the paint factory workers in lagos, Nigeria.

    Science.gov (United States)

    Awodele, Olufunsho; Popoola, Temidayo D; Ogbudu, Bawo S; Akinyede, Akin; Coker, Herbert A B; Akintonwa, Alade

    2014-06-01

    The manufacture of paint involves a variety of processes that present with medical hazards. Safety initiatives are hence introduced to limit hazard exposures and promote workplace safety. This aim of this study is to assess the use of available control measures/initiatives in selected paint factories in Lagos West Senatorial District, Nigeria. A total of 400 randomly selected paint factory workers were involved in the study. A well-structured World Health Organization standard questionnaire was designed and distributed to the workers to elicit information on awareness to occupational hazards, use of personal protective devices, and commonly experienced adverse symptoms. Urine samples were obtained from 50 workers randomly selected from these 400 participants, and the concentrations of the heavy metals (lead, cadmium, arsenic, and chromium) were determined using atomic absorption spectroscopy. The results show that 72.5% of the respondents are aware of the hazards associated with their jobs; 30% have had formal training on hazards and safety measures; 40% do not use personal protective devices, and 90% of the respondents reported symptoms relating to hazard exposure. There was a statistically significant (p metal concentrations in the urine samples obtained from paint factory workers as compared with nonfactory workers. The need to develop effective frameworks that will initiate the integration and ensure implementation of safety regulations in paint factories is evident. Where these exist, there is a need to promote adherence to these practice guidelines.

  13. Application of Chemometric Techniques to Colorimetric Data in Classifying Automobile Paint

    International Nuclear Information System (INIS)

    Nur Awatif Rosli; Rozita Osman; Norashikin Saim; Mohd Zuli Jaafar

    2015-01-01

    The analysis of paint chips is of great interest to forensic investigators, particularly in the examination of hit-and run cases. This study proposes a direct and rapid method in classifying automobile paint samples based on colorimetric data sets; absorption value, reflectance value, luminosity value (L), degree of redness (a) and degree of yellowness (b) obtained from video spectral comparator (VSC) technique. A total of 42 automobile paint samples from 7 manufacturers were analysed. The colorimetric datasets obtained from VSC analysis were subjected to chemometric technique namely cluster analysis (CA) and principal component analysis (PCA). Based on CA, 5 clusters were generated; Cluster 1 consisted of silver color, cluster 2 consisted of white color, cluster 3 consisted of blue and black colors, cluster 4 consisted of red color and cluster 5 consisted of light blue color. PCA resulted in two latent factors explaining 95.58 % of the total variance, enabled to group the 42 automobile paints into five groups. Chemometric application on colorimetric datasets provide meaningful classification of automobile paints based on their tone colour (L, a, b) and light intensity These approaches have the potential to ease the interpretation of complex spectral data involving a large number of comparisons. (author)

  14. THE COMPARISON BETWEEN NMF AND ICA IN PIGMENT MIXTURE IDENTIFICATION OF ANCIENT CHINESE PAINTINGS

    Directory of Open Access Journals (Sweden)

    Y. Liu

    2018-04-01

    Full Text Available Since the colour in painting cultural relics observed by our naked eyes or hyperspectral cameras is usually a mixture of several kinds of pigments, the mixed pigments analysis will be an important subject in the field of ancient painting conservation and restoration. This paper aims to find a more effective method to confirm the types of every pure pigment from mixture on the surface of paintings. Firstly, we adopted two kinds of blind source separation algorithms, which are independent component analysis and non-negative matrix factorization, to extract the pure pigment component from mixed spectrum respectively. Moreover, we matched the separated pure spectrum with the pigments spectra library built by our team to determine the pigment type. Furthermore, three kinds of data including simulation data, mixed pigments spectral data measured in laboratory, and the spectral data of an ancient painting were chosen to evaluate the performance of the different algorithms. And the accuracy was compared between the two algorithms. Finally, the experimental results show that non-negative matrix factorization method is more suitable for endmember extraction in the field of ancient painting conservation and restoration.

  15. The Comparison Between Nmf and Ica in Pigment Mixture Identification of Ancient Chinese Paintings

    Science.gov (United States)

    Liu, Y.; Lyu, S.; Hou, M.; Yin, Q.

    2018-04-01

    Since the colour in painting cultural relics observed by our naked eyes or hyperspectral cameras is usually a mixture of several kinds of pigments, the mixed pigments analysis will be an important subject in the field of ancient painting conservation and restoration. This paper aims to find a more effective method to confirm the types of every pure pigment from mixture on the surface of paintings. Firstly, we adopted two kinds of blind source separation algorithms, which are independent component analysis and non-negative matrix factorization, to extract the pure pigment component from mixed spectrum respectively. Moreover, we matched the separated pure spectrum with the pigments spectra library built by our team to determine the pigment type. Furthermore, three kinds of data including simulation data, mixed pigments spectral data measured in laboratory, and the spectral data of an ancient painting were chosen to evaluate the performance of the different algorithms. And the accuracy was compared between the two algorithms. Finally, the experimental results show that non-negative matrix factorization method is more suitable for endmember extraction in the field of ancient painting conservation and restoration.

  16. Reproducing oil paint gloss in print for the purpose of creating reproductions of Old Masters

    Science.gov (United States)

    Elkhuizen, Willemijn S.; Lenseigne, Boris A. J.; Baar, Teun; Verhofstad, Wim; Tempelman, Erik; Geraedts, Jo M. P.; Dik, Joris

    2015-03-01

    In the field of Fine Art reproduction, 3D scanning plus 3D printing, combined with dedicated software, now allows to capture and reproduce the color and texture of oil paintings. However, for life-like reproduction of the material appearance of such paintings, the typical gloss and translucency must also be included, which is currently not the case. The aim of this paper is to elaborate on the challenges and results of capturing and reproducing oil paint gloss (next to texture and color) using a scanning and printing system. A sample was hand-made using oil paint and acrylic varnish, and its gloss was then reproduced. A gloss map of the painted sample was acquired using a high end DLSR camera and a simple acquisition protocol. Next, Océ High Resolution 3D printing technology was used to create samples with spatially varying gloss. For this, two different strategies were combined: (1) multilevel half-toning of the colors was used to reproduce matte color layers, and (2) varnish was half-toned on top in increasing coverage to recreate increasing gloss levels. This paper presents an overview of the state-of-the-art literature in gloss reproduction and perception, our process of reproduction as well as the visual evaluation of the quality of the created reproduction.

  17. Do Preschoolers Recognize The Emotional Expressiveness of Colors in Realistic and Abstract Art Paintings?

    Science.gov (United States)

    Pouliou, Dimitra; Bonoti, Fotini; Nikonanou, Niki

    2018-01-01

    The present study was designed to examine preschoolers' ability to recognize the emotional expressiveness of an art painting, through its colors. To attain this aim 78 children, 3-5 years old were presented with realistic and abstract paintings conveying either happiness or sadness and were asked to choose those which matched the appropriate emotion. In total 16 paintings were used, which varied in color, while their subject matter was held as constant as possible after they had been previously rated by a group of adults to ensure that they conveyed the two emotions under investigation. Results showed that children's ability to recognize the emotional expressiveness of a painting through its colors appears at 3 years old and increases significantly at 4 and 5 years old. It was also found that the mood of happiness was more easily recognized than that of sadness, while the style of art paintings (realistic vs. abstract) did not affect children's ability to recognize emotions.

  18. New Finds of Painted Ceramics of the Epoch of the Abkhazian Kingdom

    Directory of Open Access Journals (Sweden)

    Armarchuk Ekaterina A.

    2012-03-01

    Full Text Available The painted polished red-clay ceramic items of the 8th-10th centuries, found on the Anakopia and other sites of Northern Abkhazia and the adjoining district of the city of Sochi are considered in the article. These are small and medium sized single-handled narrow-necked jugs. The painting is made in dark brown paint. The ornament consists mainly of straight and wavy lines; hatching in the form of oblique grids, braids and patterns of specks occur. Taking into account the new finds made during the 2007-2008 excavations of the necropolis on the Sakharnaya Golovka Mountain and of the church near Veseloye village, the analysis of painted polished ware of the Abkhazian Kingdom epoch makes it possible to determine its territorial and chronological distribution limits. The area of this pottery covers the Black Sea coast from the mouth of the Mzymta river to New Athos. Based on the results of the 1950-1980s excavations, it has been dated to the 8th-10th centuries; however, the new materials allow restricting the interval to the 9th-10th centuries. The differences in the vessels manufacturing technology indicate the presence of at least two production centers. The small painted burnished jars discovered in Christian graves suggest that they had been used to store incense or chrism.

  19. Composition of Renaissance paint layers: simultaneous particle induced X-ray emission and backscattering spectrometry.

    Science.gov (United States)

    de Viguerie, L; Beck, L; Salomon, J; Pichon, L; Walter, Ph

    2009-10-01

    Particle induced X-ray emission spectroscopy (PIXE) is now routinely used in the field of cultural heritage. Various setups have been developed to investigate the elemental composition of wood/canvas paintings or of cross-section samples. However, it is not possible to obtain information concerning the quantity of organic binder. Backscattering spectrometry (BS) can be a useful complementary method to overcome this limitation. In the case of paint layers, PIXE brings the elemental composition (major elements to traces) and the BS spectrum can give access to the proportion of pigment and binder. With the use of 3 MeV protons for PIXE and BS simultaneously, it was possible to perform quantitative analysis including C and O for which the non-Rutherford cross sections are intense. Furthermore, with the use of the same conditions for PIXE and BS, the experiment time and the potential damage by the ion beam were reduced. The results obtained with the external beam of the Accélérateur Grand Louvre pour l'Analyse Elementaire (AGLAE) facility on various test painting samples and on cross sections from Italian Renaissance masterpieces are shown. Simultaneous combination of PIXE and BS leads to a complete characterization of the paint layers: elemental composition and proportion of the organic binder have been determined and thus provide useful information about ancient oil painting recipes.

  20. ICT ADOPTION IN EMERGING CONTEMPORARY MARKETING PRACTICES: THE CASE OF THE NIGERIAN PAINTS INDUSTRY

    Directory of Open Access Journals (Sweden)

    Michael Oluwaseun OLOMU

    2016-09-01

    Full Text Available The growing awareness of firms about the deployment of information and communications technology continued to stimulate competitive advantage for them in the marketplace. This study investigated the numerous information and communications technologies deployed for products marketing in the Nigerian paints industry and also examined the degree of capacity in which ICTs were deployed in relations to contemporary marketing practices. This study considerably administered 240 questionnaire on paints manufacturing and marketing firms in Nigeria which resulted to 84.5% response rate in year 2014. The outcomes of the analysis revealed that the telephone and e-mail were widely embraced for marketing in the Nigerian paints industry. It was also discovered that paints companies adopted ICT more in a reinforcing capability as against enhancing and transforming purposes. The study suggested that paints producing and marketing firms in Nigeria need to incorporate more of ICT facilities and utilize the various offers of electronic marketing for their daily operations and automations thereby improving firm’s profitability and performance. More importantly, attention should be shifted on companies’ capability to innovate and consequently introducing new ICT products and services in the market.

  1. Difference in brain activations during appreciating paintings and photographic analogues

    Directory of Open Access Journals (Sweden)

    Yoshinori eMizokami

    2014-07-01

    Full Text Available Several studies have investigated neural correlates of aesthetic appreciation for paintings but to date the findings have been heterogeneous. This heterogeneity may be attributed to previous studies’ measurement of aesthetic appreciation of not only the beauty of paintings but also the beauty of motifs of the paintings. In order to better elucidate the beauty of paintings, it seems necessary to compare aesthetic appreciation of paintings and photographic analogues which included corresponding real images. We prepared for famous painters’ pictures and their photographic analogues which were set up to resemble each painting in order to investigate the hypothesis that there exist specific neural correlates associated with the aesthetic appreciation for paintings. Forty-four subjects participated in functional magnetic resonance study which required comparisons of aesthetic appreciation of paintings of still life and landscape versus photographic analogues including corresponding real images of still life and landscape. Bilateral cuneus and the left lingual gyrus were activated in the comparison of aesthetic appreciation of paintings versus photographic analogues. In conclusion, the present findings suggest a possibility of the existence of specific neural correlates associated with the aesthetic appreciation for paintings and that bilateral cuneus and the left lingual gyrus may be involved.

  2. Modelling Electrical Energy Consumption in Automotive Paint Shop

    Science.gov (United States)

    Oktaviandri, Muchamad; Safiee, Aidil Shafiza Bin

    2018-03-01

    Industry players are seeking ways to reduce operational cost to sustain in a challenging economic trend. One key aspect is an energy cost reduction. However, implementing energy reduction strategy often struggle with obstructions, which slow down their realization and implementation. Discrete event simulation method is an approach actively discussed in current research trend to overcome such obstructions because of its flexibility and comprehensiveness. Meanwhile, in automotive industry, paint shop is considered the most energy consumer area which is reported consuming about 50%-70% of overall automotive plant consumption. Hence, this project aims at providing a tool to model and simulate energy consumption at paint shop area by conducting a case study at XYZ Company, one of the automotive companies located at Pekan, Pahang. The simulation model was developed using Tecnomatix Plant Simulation software version 13. From the simulation result, the model was accurately within ±5% for energy consumption and ±15% for maximum demand after validation with real system. Two different energy saving scenarios were tested. Scenario 1 was based on production scheduling approach under low demand situation which results energy saving up to 30% on the consumption. Meanwhile scenario 2 was based on substituting high power compressor with the lower power compressor. The results were energy consumption saving of approximately 1.42% and maximum demand reduction about 1.27%. This approach would help managers and engineers to justify worthiness of investment for implementing the reduction strategies.

  3. RESULTS OF INTRODUCTION OF A PROCESS APPROACH TO MANAGEMENT OF SUBJECTS OF SMALL BUSINESS (on an example of logistic service of the construction enterprise

    Directory of Open Access Journals (Sweden)

    E. V. Folomeev

    2013-01-01

    Full Text Available The article is devoted to subjects of small business of construction branch, their place in branch and to problems of management by them. The question of need of introduction of the most effective methods of management by the construction organization, in particular, a process approach is brought up. In article the characteristic of separate elements of this approach is given, methods and ways of their realization at the enterprise from the point of view of allocation and optimization of costs of the enterprise from the logistical point of view are considered and results of its introduction on an example of logistic service of the construction enterprise are given..

  4. Oil painting on tinplate by Francisco José Resende

    Directory of Open Access Journals (Sweden)

    Ana Rita Veiga

    2010-11-01

    Full Text Available Cet article se concentre sur l'étude des techniques d'exécution, des matériaux et de l'état de conservation de trois peintures à l'huile sur fer-blanc (acier couvert d'étain du peintre portugais Francisco José Resende (1825 – 1893. Bien que le choix de peindre sur un support métallique n'était pas commun au XIXème siècle, cet auteur a exécuté au long de sa vie différentes œuvres sur ce substrat. Dans ces recherches, apparaissent les résultats comparatifs de la technique d'exécution de Francisco Resende et des matériaux présents dans les couches picturales et dans le support des trois œuvres faisant l'objet de l'étude. Bien qu'elles aient été exécutées à des dates similaires, on remarque des problèmes de conservation distincts - notamment les détachements, les cloques et la corrosion -, qui sont décrits et liés aux matériaux constituants des peintures.This article focuses on the study of execution techniques, material composition and condition of three oil paintings on tinplate – a thin sheet of steel coated with tin - by the Portuguese painter Francisco José Resende (1825-1893. Although the choice to paint on a metallic support was not very common in the nineteenth century, the painter executed several works on this support. The comparative results focus on Francisco Resende’s technique of execution, the materials used in the paint layers and on the support of the three works which are being studied. Although executed in the same period, they show different conservation problems - namely delamination and blistering of the paint layers, and also corrosion of the support.

  5. Influence of different aggressive media on the protective behaviour of zinc rich paints

    International Nuclear Information System (INIS)

    Abreu, C. M.; Perez, C.; Sanchez, A.; Izquierdo, M.; Novoa, X. R.

    1999-01-01

    The aim of the present work is to determine the influence that different atmospheric agents have in steel protection by zinc rich paints based on inorganic silicate binder. The presence of pollutants in the atmosphere has been simulated by periodical deposition of sulphate and/or chloride solutions on the surface of the samples. With the aim of determining the validity of immersion tests, usually used in these types studies, the samples were kept in a controlled atmosphere at 20 degree centigrade and 60% RH. These exposition conditions could represent a relative dry atmosphere allowing the zinc corrosion. Electrochemical impedance spectroscopy was employed to follow the time evolution of the studied paints. The corresponding impedance spectra were modelled using an electrical equivalent circuit approach. This methodology allows establishing that pollutants as well as weathering conditions define the protecting mechanism of these zinc rich paints. The results show a fast evolution towards a barrier-type protecting mechanism

  6. Tensile properties of latex paint films with TiO2 pigment

    Science.gov (United States)

    Hagan, Eric W. S.; Charalambides, Maria N.; Young, Christina T.; Learner, Thomas J. S.; Hackney, Stephen

    2009-05-01

    The tensile properties of latex paint films containing TiO2 pigment were studied with respect to temperature, strain-rate and moisture content. The purpose of performing these experiments was to assist museums in defining safe conditions for modern paintings held in collections. The glass transition temperature of latex paint binders is in close proximity to ambient temperature, resulting in high strain-rate dependence in typical exposure environments. Time dependence of modulus and failure strain is discussed in the context of time-temperature superposition, which was used to extend the experimental time scale. Nonlinear viscoelastic material models are also presented, which incorporate a Prony series with the Ogden or Neo-Hookean hyperelastic function for different TiO2 concentrations.

  7. Analysis of the painting 'The first mass in Brazil' (Vitor Meireles) using a portable XRF system

    International Nuclear Information System (INIS)

    Calza, Cristiane; Lopes, Ricardo Tadeu

    2007-01-01

    Energy Dispersive X-Ray Fluorescence was used to analyze the painting 'The First Mass in Brazil', identifying the pigments used by the artist, areas that revealed signs of previous retouchings and visible alterations in the paint layer, in order to settle the best procedures to its recovery. This painting, executed by Vitor Meireles in 1860, is one of the most powerful and definitive images ever created by a Brazilian artist. The measurements were carried out with a portable EDXRF system consisting of a TF3005 x-ray tube from Oxford with W anode, operating at 25 kV and 100 μA, and a Si-PIN XR-100CR detector from Amptek. The results revealed that the drawings were made over a preparatory layer of zinc and lead white pigments. Some pigments used by the artist were: ochre, umbra, vermilion, Prussian blue, chromium oxide and cobalt blue. (author)

  8. Enhancing aesthetic appreciation by priming canvases with actions that match the artist’s painting style.

    Directory of Open Access Journals (Sweden)

    Luca Francesco Ticini

    2014-06-01

    Full Text Available The creation of an artwork requires motor activity. To what extent is art appreciation divorced from that activity and to what extent is it linked to it? That is the question which we set out to answer. We presented participants with pointillist-style paintings featuring discernible brushstrokes and asked them to rate their liking of each canvas when it was preceded by images priming a motor act either compatible or incompatible with the simulation of the artist’s movements. We show that action priming, when congruent with the artist’s painting style, enhanced aesthetic preference. These results support the hypothesis that involuntary covert painting simulation contributes to aesthetic appreciation during passive observation of artwork.

  9. Rock Art Paintings (Rock Inscriptions) At Gebel Abraq, South Eastern Desert, Egypt

    International Nuclear Information System (INIS)

    Zaghloul, E.A.; Yehia, M.A.; Elewa, H.H.

    2003-01-01

    This article presents rock art painting in an area located at the scarp face of Wadi Abraq (Latitude 230 28' N and Longitude 340 45' E). The site is a sandstone protruding ledge rising about 30m. above the ground level. The Gebel Abraq paintings depict a tropical fauna including Elephants, Giraffes, Cows and Ostrich denoting that the area was previously subjected to intensive rainfall during the last pluvial periods. The result was a savana type of land. During recent times, the climate became dry and the communities were forced to move to other areas wher natural springs are still flowing such as Ain Abraq and Bir Abu-Safa. The present founding of the prehistoric paintings (Graffiti) has revealed a mass of evidence that many of the concepts regarding Sahara rock art should be studied

  10. Application of automotive paint sludge in the production of white ceramic

    International Nuclear Information System (INIS)

    Praxedes, P.B.; Ponte, H.A.; Mymrine, V.

    2016-01-01

    Full text: Paint wastes of an automotive industry were evaluated in terms of their chemical and mineralogical characteristics in order to analyse its potential use as a reinforcing agent in white ceramic. Both kaolin and sludge paint were analysed using the techniques of XRF, XRD, SEM, EDS. In order to understand the behaviour of the sludge during firing, TGA and DTA analysis were done. Samples containing kaolin and 0, 1, 2, 4 and 8 (wt.%) sludge paint were prepared. The ceramics were compacted at 10MPa and sintered at 1000 °C, 1200 °C, 1250 °C and 1300 °C. Water absorption, linear shrinkage and flexural strength were the mechanical properties evaluated in the samples. The experimental results showed that the samples with lagers amounts of sludge performed better or similar to the samples that only contained kaolin. The insertion of 8 (wt.%) of sludge in the specimen increased flexural strength in 63%. (author)

  11. The total hemispheric emissivity of painted aluminum honeycomb at cryogenic temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Tuttle, J.; Canavan, E.; DiPirro, M.; Li, X. [NASA Goddard Space Flight Center, Code 552 Greenbelt, Maryland, 20771 (United States); Knollenberg, P. [Northrop Grumman Aerospace Systems Redondo Beach, CA 90278 (United States)

    2014-01-29

    NASA uses high-emissivity surfaces on deep-space radiators and thermal radiation absorbers in test chambers. Aluminum honeycomb core material, when coated with a high-emissivity paint, provides a lightweight, mechanically robust, and relatively inexpensive black surface that retains its high emissivity down to low temperatures. At temperatures below about 100 Kelvin, this material performs much better than the paint itself. We measured the total hemispheric emissivity of various painted honeycomb configurations using an adaptation of an innovative technique developed for characterizing thin black coatings. These measurements were performed from room temperature down to 30 Kelvin. We describe the measurement technique and compare the results with predictions from a detailed thermal model of each honeycomb configuration.

  12. About the choice of tension for canvas paintings

    Directory of Open Access Journals (Sweden)

    Antonio Iaccarino Idelson

    2009-10-01

    Full Text Available The choice of the value of tension for a canvas painting is crucial for its future life, but tradition has handed us methods based on intuition that do not allow us comparing the results of different choices. Since the 1950es it is possible to measure the force used for stretching a painting, but this is very rarely done. This paper describes the evolution of the approach to the problem and points out the results of recent research and changes in attitude.Le choix de la valeur de tension pour une peinture sur toile est crucial pour sa future conservation, mais la tradition nous a transmis des méthodes fondées sur l’intuition qui ne nous permettent pas de comparer les effets des différents choix. Depuis les années 1950 il est possible de mesurer la force de tension choisie pour une peinture, mais ce la est fait très rarement. Cet article décrit l’évolution de l’approche à ce problème et souligne les résultats de récents recherches et changements d’attitude.      

  13. The cleaner, the greener? Product sustainability assessment of the biomimetic façade paint Lotusan® in comparison to the conventional façade paint Jumbosil®

    Directory of Open Access Journals (Sweden)

    Florian Antony

    2016-12-01

    Full Text Available Background: The debate on the question whether biomimetics has a specific potential to contribute to sustainability is discussed among scientists, business leaders, politicians and those responsible for project funding. The objective of this paper is to contribute to this controversial debate by presenting the sustainability assessment of one of the most well-known and most successful biomimetic products: the façade paint Lotusan®.Results: As a first step it has been examined and verified that the façade paint Lotusan® is correctly defined as a biomimetic product. Secondly, Lotusan® has been assessed and compared to a conventional façade paint within the course of a detailed product sustainability assessment (PROSA. For purposes of comparison, the façade paint Jumbosil® was chosen as reference for a conventional paint available on the market. The benefit analysis showed that both paints fulfil equally well the requirements of functional utility. With respect to the symbolic utility, Lotusan® has a particular added aesthetic value by the preservation of the optical quality over the life cycle. Within the social analysis no substantial differences between the two paints could be found regarding the handling and disposal of the final products. Regarding the life-cycle cost, Lotusan® is the more expensive product. However, the higher investment cost for a Lotusan®-based façade painting are more than compensated by the longer life time, resulting in both reduced overall material demand and lower labour cost. In terms of the life-cycle impact assessment, it can be ascertained that substantial differences between the paints arise from the respective service life, which are presented in terms of four scenario analyses.Conclusion: In summary, the biomimetic façade paint Lotusan® has been identified as a cost-effective and at the same time resource-saving product. Based on the underlying data and assumptions it could be demonstrated that

  14. The Hadamard construction of Green's functions on a curved space-time: physics and explicit rigorous results

    International Nuclear Information System (INIS)

    John, R.W.

    1987-01-01

    First, in connection with their construction due to Hadamard, the mathematical and physical meaning of covariant Green's functions in relativistic gravitational fields - according to Einstein: on curved space-time - is discussed. Then, in the case of a general static spherically symmetric space-time the construction equations for a scalar Green's function are cast into symmetry-adapted form providing a convenient starting point for an explicit calculation of the Hadamard building elements. In applying the obtained basic scheme to a special one-parameter family of model metrics one succeeds in advancing to the explicit exact calculation of tail-term coefficients of a massless Green's function which are simultaneously coefficients in the Schwinger-De Witt expansion of the Feynman propagator for the corresponding massive Klein-Gordon equation on curved space-time. (author)

  15. A multi-technique approach for the characterization of Roman mural paintings

    Energy Technology Data Exchange (ETDEWEB)

    Toschi, Francesco [CNR-IMIP (Istituto di Metodologie Inorganiche e dei Plasmi), Area della Ricerca Roma 1, Via Salaria Km. 29,300, 00016 Monterotondo, Roma, (Italy); Paladini, Alessandra, E-mail: alessandra.paladini@cnr.it [CNR-IMIP (Istituto di Metodologie Inorganiche e dei Plasmi), Area della Ricerca Roma 1, Via Salaria Km. 29,300, 00016 Monterotondo, Roma, (Italy); Colosi, Francesca [CNR-ITABC (Istituto per le Tecnologie Applicate ai Beni Culturali), Area della Ricerca Roma 1, Via Salaria Km. 29,300, 00016 Monterotondo, Roma (Italy); Cafarelli, Patrizia; Valentini, Veronica [CNR-IMIP (Istituto di Metodologie Inorganiche e dei Plasmi), Area della Ricerca Roma 1, Via Salaria Km. 29,300, 00016 Monterotondo, Roma, (Italy); Falconieri, Mauro; Gagliardi, Serena [ENEA, C.R. Casaccia, via Anguillarese 301, 00060 Roma (Italy); Santoro, Paola [CNR-ISMA (Istituto di Studi sul Mediterraneo Antico), Area della Ricerca Roma 1, Via Salaria Km. 29,300, 00016 Monterotondo, Roma (Italy)

    2013-11-01

    In the frame of an ongoing archeological study on the Sabina area, a countryside close to Rome, white and red samples of roman wall paintings have been investigated by combining X-ray diffraction and different spectroscopic methodologies, namely laser induced breakdown spectroscopy, μ-Raman and Fourier transform infrared attenuated total reflectance spectroscopy. The used multi-technique approach has allowed the unambiguous identification of the red pigment as red ochre and has provided insight on the provenance of both the pigment and the material used for the realization of the wall paintings. The experimental results have confirmed some assumptions on the use of local materials in roman rural architecture.

  16. Impact of Paint Color on Rest Period Climate Control Loads in Long-Haul Trucks: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Lustbader, J.; Kreutzer, C.; Jeffers, M.; Adelman, S.; Yeakel, S.; Brontz, P.; Olson, K.; Ohlinger, J.

    2014-02-01

    Cab climate conditioning is one of the primary reasons for operating the main engine in a long-haul truck during driver rest periods. In the United States, sleeper cab trucks use approximately 667 million gallons of fuel annually for rest period idling. The U.S. Department of Energy's National Renewable Energy Laboratory's (NREL) CoolCab Project works closely with industry to design efficient thermal management systems for long-haul trucks that minimize engine idling and fuel use while maintaining occupant comfort. Heat transfer to the vehicle interior from opaque exterior surfaces is one of the major heat pathways that contribute to air conditioning loads during long-haul truck daytime rest period idling. To quantify the impact of paint color and the opportunity for advanced paints, NREL collaborated with Volvo Group North America, PPG Industries, and Dometic Environmental Corporation. Initial screening simulations using CoolCalc, NREL's rapid HVAC load estimation tool, showed promising air-conditioning load reductions due to paint color selection. Tests conducted at NREL's Vehicle Testing and Integration Facility using long-haul truck cab sections, 'test bucks,' showed a 31.1% of maximum possible reduction in rise over ambient temperature and a 20.8% reduction in daily electric air conditioning energy use by switching from black to white paint. Additionally, changing from blue to an advanced color-matched solar reflective blue paint resulted in a 7.3% reduction in daily electric air conditioning energy use for weather conditions tested in Colorado. National-level modeling results using weather data from major U.S. cities indicated that the increase in heating loads due to lighter paint colors is much smaller than the reduction in cooling loads.

  17. Are Shaman Paintings Material Religion or Religious Art?

    OpenAIRE

    Jong-chun Park

    2017-01-01

    Laurel Kendall, Jongsung Yang, and Yul Soo Yoon. God Pictures in Korean Contexts: The Ownership and Meaning of Shaman Paintings. Honolulu: University of Hawai'i Press, 2015. God Pictures in Korean Contexts: The Ownership and Meaning of Shaman Paintings is a pioneering work, one that explores the proverbial “road not taken” by previous research on the subject. The authors situate “the lives of Korean shaman paintings [musindo] in a complex South Korean world; in shaman shrines, private co...

  18. Performance study of the paints for use in nuclear installations

    International Nuclear Information System (INIS)

    Yamashita, T.

    1978-01-01

    The performance of some Brazilian commercial paints under physical, chemical and radiation conditions typical of nuclear installations is studied. Resistance to gama rays in the range of 10 4 - 10 9 rad as well as the susceptibility to contamination, ease of decontamination and chemical resistance in 9 different types of paints are studied. Finally, suggestions are provided for the best choice of commercial paints according to their specific uses [pt

  19. The physicochemical characterization of cave paintings of Baja California

    International Nuclear Information System (INIS)

    Valdez, B.; Cobo, J.; Schorr, M.; Cota, L.; Oviedo, F.

    2006-01-01

    The Palaeolithic paintings of Baja California constitute an important contribution to the national, historic and cultural patrimony of Mexico. The aim of this investigation was to determine the physicochemical characteristics, the microstructure and texture of these polychrome paintings, painted on rocks encountered in the mountainous, desert/arid zones of Baja California and Baja California South. The first stage of this work was devoted to the examination and recording of the cave paintings of 'El Vallecito', a narrow fluvial valley displaying large granitic rocks emerging from the sandy soil. Tiny painting samples were collected and analyzed by SEM, EDS and FTIR techniques. The painters used four main colours: red, black, yellow and white. The paint raw materials are mineral pigments: white (kaolin, calcite, and gypsum), red (hematite), yellow (ochre, limonite), black (charcoal from burnt wood or calcined bones) and water as a diluent and/or a binder, all encountered in the painters habitat. The minerals were collected, ground and sometimes heated to change their tone. By mixing with water, a spreadable paste or a thick slurry was produced, which was applied with the fingers for lines or a piece of animal skin for figures, respectively. The 100% solids, dry paint converts into a dense, hard layer, incrusted into the grainy, rough, hollow granite rock surface. This paint might be called s tone on stone , explaining its permanence for centuries enduring heat, wind and weather. A simulation of the painting technique was done at the Materials and Corrosion Laboratory, UABC by collecting mineral pigments, preparing the paint as a paste or slurry and applying it on a granitic rock. Knowing the paint composition, production and application techniques will be useful in e conservation and restoration of cave paintings and stone-built, ancient structures such as pyramids, cathedrals and monuments. (Author)

  20. Direct 14C dating of megalithic paints from NW Iberia

    Directory of Open Access Journals (Sweden)

    Carrera Ramírez, Fernando

    2002-06-01

    Full Text Available In this paper we present 5 AMS dates obtained from the paintings found on the uprights of 4 Galician megalithic graves. The results have shown that this art belongs roughly to the first half of the 4th millennium BC and pose the question of the contemporaneity of the building of the chambers and the execution of the paintings and also the occurrence of more than one episode of decoration in them.

    En este trabajo damos a conocer cinco dataciones radiocarbónicas AMS obtenidas a partir de muestras de pintura de cuatro monumentos megalíticos gallegos. Los resultados obtenidos confirman la utilidad de este tipo de análisis a la hora de trazar la cronología de estas manifestaciones artísticas (en torno a la primera mitad del IV milenio AC y plantean además nuevas cuestiones acerca de la simultaneidad entre la pintura y la construcción de las cámaras, así como la existencia de dos o más episodios pictóricos.

  1. Development of paints with infrared radiation reflective properties

    Directory of Open Access Journals (Sweden)

    Eliane Coser

    2015-06-01

    Full Text Available AbstractLarge buildings situated in hot regions of the Globe need to be agreeable to their residents. Air conditioning is extensively used to make these buildings comfortable, with consequent energy consumption. Absorption of solar visible and infrared radiations are responsible for heating objects on the surface of the Earth, including houses and buildings. To avoid excessive energy consumption, it is possible to use coatings formulated with special pigments that are able to reflect the radiation in the near- infrared, NIR, spectrum. To evaluate this phenomenon an experimental study about the reflectivity of paints containing infrared-reflective pigments has been made. By irradiating with an IR source and by measuring the surface temperatures of the samples we evaluated: color according to ASTM D 2244-14, UV/VIS/NIR reflectance according to ASTM E 903-12 and thermal performance. Additionally, the spectral reflectance and the IR emittance were measured and the solar reflectance of the samples were calculated. The results showed that plates coated with paints containing IR-reflecting pigments displayed lower air temperature on the opposite side as compared to conventional coatings, indicating that they can be effective to reflect NIR and decrease the temperature of buildings when used in roofs and walls.

  2. Spectroscopic study of an icon painted on wooden panel

    Directory of Open Access Journals (Sweden)

    Stojanović Sofija R.

    2015-01-01

    Full Text Available Russian icon painted on wooden panel analyzed in this work is interesting for art historians because there is no precise information in which workshops it was made or who the author was. Similar icons are often found in churches and monasteries in our region. In order to obtain information about materials used for creation of investigated icon two micro-analytical techniques were used: Energy-Dispersive X-Ray Fluorescence spectroscopy (EDXRF and micro-Raman spectroscopy. Obtained results confirmed presence of following materials: lead-white, vermilion, minium, ultramarine, brown and green earth pigments and silver in combination with yellow organic varnish, which served to an iconographer for gilding. Ground layer was made of calcite. Blue pigment ultramarine was probably used for blue colour as well as for obtaining particulars hues in several parts of the paint layer. This can be important information for further research concerning particular workshop in which the icon was made. Identified materials are typical for Russian iconography of the 19th century. [Projekat Ministarstva nauke Republike Srbije, br. OI 177021 i OI 177012

  3. Style-based classification of Chinese ink and wash paintings

    Science.gov (United States)

    Sheng, Jiachuan; Jiang, Jianmin

    2013-09-01

    Following the fact that a large collection of ink and wash paintings (IWP) is being digitized and made available on the Internet, their automated content description, analysis, and management are attracting attention across research communities. While existing research in relevant areas is primarily focused on image processing approaches, a style-based algorithm is proposed to classify IWPs automatically by their authors. As IWPs do not have colors or even tones, the proposed algorithm applies edge detection to locate the local region and detect painting strokes to enable histogram-based feature extraction and capture of important cues to reflect the styles of different artists. Such features are then applied to drive a number of neural networks in parallel to complete the classification, and an information entropy balanced fusion is proposed to make an integrated decision for the multiple neural network classification results in which the entropy is used as a pointer to combine the global and local features. Evaluations via experiments support that the proposed algorithm achieves good performances, providing excellent potential for computerized analysis and management of IWPs.

  4. Evaluation of stabilization of steel surface corrosion by paints

    Directory of Open Access Journals (Sweden)

    Aleš Dvořák

    2005-01-01

    Full Text Available This article deals with laboratory experiments focused on protective and stabilizing effects of paints designed to protect rusted steel surfaces. Two well-known paints (the Hammerite No.1 Rustbeater synthetic paint and the Antirezin water-soluble paint have been evaluated. The standardized tests according to ČSN have been used for the evaluation. Stabilization of rusted steel surface hasn’t been demonstrated during the tests. The SEM test method that covers micro-analysis of elements has been used for the evaluation as well.

  5. Oxygen-Independent Pressure Sensitive Paint, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Pressure sensitive paint (PSP) systems are excellent tools for performing global pressure measurements in aerodynamic testing, especially in wind tunnel studies. The...

  6. Digital cleaning and "dirt" layer visualization of an oil painting.

    Science.gov (United States)

    Palomero, Cherry May T; Soriano, Maricor N

    2011-10-10

    We demonstrate a new digital cleaning technique which uses a neural network that is trained to learn the transformation from dirty to clean segments of a painting image. The inputs and outputs of the network are pixels belonging to dirty and clean segments found in Fernando Amorsolo's Malacañang by the River. After digital cleaning we visualize the painting's discoloration by assuming it to be a transmission filter superimposed on the clean painting. Using an RGB color-to-spectrum transformation to obtain the point-per-point spectra of the clean and dirty painting images, we calculate this "dirt" filter and render it for the whole image.

  7. Contribution of the microbial communities detected on an oil painting on canvas to its biodeterioration.

    Directory of Open Access Journals (Sweden)

    María Del Mar López-Miras

    Full Text Available In this study, we investigated the microbial community (bacteria and fungi colonising an oil painting on canvas, which showed visible signs of biodeterioration. A combined strategy, comprising culture-dependent and -independent techniques, was selected. The results derived from the two techniques were disparate. Most of the isolated bacterial strains belonged to related species of the phylum Firmicutes, as Bacillus sp. and Paenisporosarcina sp., whereas the majority of the non-cultivable members of the bacterial community were shown to be related to species of the phylum Proteobacteria, as Stenotrophomonas sp. Fungal communities also showed discrepancies: the isolated fungal strains belonged to different genera of the order Eurotiales, as Penicillium and Eurotium, and the non-cultivable belonged to species of the order Pleosporales and Saccharomycetales. The cultivable microorganisms, which exhibited enzymatic activities related to the deterioration processes, were selected to evaluate their biodeteriorative potential on canvas paintings; namely Arthrobacter sp. as the representative bacterium and Penicillium sp. as the representative fungus. With this aim, a sample taken from the painting studied in this work was examined to determine the stratigraphic sequence of its cross-section. From this information, "mock paintings," simulating the structure of the original painting, were prepared, inoculated with the selected bacterial and fungal strains, and subsequently examined by micro-Fourier Transform Infrared spectroscopy, in order to determine their potential susceptibility to microbial degradation. The FTIR-spectra revealed that neither Arthrobacter sp. nor Penicillium sp. alone, were able to induce chemical changes on the various materials used to prepare "mock paintings." Only when inoculated together, could a synergistic effect on the FTIR-spectra be observed, in the form of a variation in band position on the spectrum.

  8. Nd:YVO{sub 4} laser removal of graffiti from granite. Influence of paint and rock properties on cleaning efficacy

    Energy Technology Data Exchange (ETDEWEB)

    Rivas, T., E-mail: trivas@uvigo.es [Dpto. Ingenieria de los Recursos Naturales y Medio Ambiente. Universidad de Vigo, Lagoas-Marcosende s/n, 36310 Vigo (Spain); Pozo, S. [Dpto. Ingenieria de los Recursos Naturales y Medio Ambiente. Universidad de Vigo, Lagoas-Marcosende s/n, 36310 Vigo (Spain); Fiorucci, M.P.; Lopez, A.J.; Ramil, A. [Centro de Investigacions Tecnoloxicas (CIT), Universidade da Coruna, 15403 Ferrol (Spain)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Cleaning using NdYVO{sub 4} laser at 355 nm of four different graffiti colours applied on granites. Black-Right-Pointing-Pointer Analysis of the influence of paint composition and properties of rocks on the process. Black-Right-Pointing-Pointer Composition of the paints and, in turn reflectance, determine the removal effectiveness. Black-Right-Pointing-Pointer The laser removal is not conditioned by properties of the stones. - Abstract: This paper presents the cleaning efficiency results for four differently coloured graffiti paints applied to two types of granitic stone by Nd:YVO{sub 4} laser at 355 nm. The paints were characterized in terms of mineralogy and chemistry using x-ray fluorescence, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscope (SEM); paint absorbance in the ultraviolet-visible-infrared range (200-2000 nm) was also assessed. The studied granites had different mineralogy, texture and porosity properties. Cleaning efficiency was evaluated by polarized microscopy, SEM, FTIR spectroscopy and spectrophotometer colour measurements. The results indicate differences in the effectiveness of surface cleaning for the blue, red and black paints as opposed to the silver paint, mainly attributed to chemical composition. No evidence was found that the granite properties had a bearing on laser effectiveness, although the degree, type and spatial distribution of transgranular fissures in the stone affected the overall assessment of cleaning effectiveness. Polarized light microscopy observations and colour measurements showed that the intensity and distribution of fissures affect the depth of paint penetration, ultimately affecting the cleaning efficiency for both granites.

  9. Nd:YVO4 laser removal of graffiti from granite. Influence of paint and rock properties on cleaning efficacy

    International Nuclear Information System (INIS)

    Rivas, T.; Pozo, S.; Fiorucci, M.P.; López, A.J.; Ramil, A.

    2012-01-01

    Highlights: ► Cleaning using NdYVO 4 laser at 355 nm of four different graffiti colours applied on granites. ► Analysis of the influence of paint composition and properties of rocks on the process. ► Composition of the paints and, in turn reflectance, determine the removal effectiveness. ► The laser removal is not conditioned by properties of the stones. - Abstract: This paper presents the cleaning efficiency results for four differently coloured graffiti paints applied to two types of granitic stone by Nd:YVO 4 laser at 355 nm. The paints were characterized in terms of mineralogy and chemistry using x-ray fluorescence, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscope (SEM); paint absorbance in the ultraviolet–visible-infrared range (200–2000 nm) was also assessed. The studied granites had different mineralogy, texture and porosity properties. Cleaning efficiency was evaluated by polarized microscopy, SEM, FTIR spectroscopy and spectrophotometer colour measurements. The results indicate differences in the effectiveness of surface cleaning for the blue, red and black paints as opposed to the silver paint, mainly attributed to chemical composition. No evidence was found that the granite properties had a bearing on laser effectiveness, although the degree, type and spatial distribution of transgranular fissures in the stone affected the overall assessment of cleaning effectiveness. Polarized light microscopy observations and colour measurements showed that the intensity and distribution of fissures affect the depth of paint penetration, ultimately affecting the cleaning efficiency for both granites.

  10. Simplified Space Conditioning in Low-Load Homes: Results from Pittsburgh, Pennsylvania, New Construction Unoccupied Test House

    Energy Technology Data Exchange (ETDEWEB)

    Poerschke, A.; Stecher, D.

    2014-06-01

    Field testing was performed in a new construction unoccupied test house in Pittsburgh, Pennsylvania. Four air-based heating, ventilation, and air conditioning distribution systems--a typical airflow ducted system to the bedrooms, a low airflow ducted system to the bedrooms, a system with transfer fans to the bedrooms, and a system with no ductwork to the bedrooms--were evaluated during heating, cooling, and midseason conditions. The relative ability of each system was assessed with respect to relevant Air Conditioning Contractors of America and ASHRAE standards for house temperature uniformity and stability, respectively.

  11. Simplified Space Conditioning in Low-Load Homes: Results from Pittsburgh, Pennsylvania, New Construction Unoccupied Test House

    Energy Technology Data Exchange (ETDEWEB)

    Poerschke, Andrew [IBACOS, Inc., Pittsburgh, PA (United States); Stecher, Dave [IBACOS, Inc., Pittsburgh, PA (United States)

    2014-06-01

    Field testing was performed in a new construction unoccupied test house in Pittsburgh, PA. Four air-based heating, ventilation, and air conditioning distribution systems—a typical airflow ducted system to the bedrooms, a low airflow ducted system to the bedrooms, a system with transfer fans to the bedrooms, and a system with no ductwork to the bedrooms—were evaluated during heating, cooling, and midseason conditions. The relative ability of each system was assessed with respect to relevant Air Conditioning Contractors of America and ASHRAE standards for house temperature uniformity and stability, respectively.

  12. Electronic Paint: Understanding Children's Representation through Their Interactions with Digital Paint

    Science.gov (United States)

    Matthews, John; Seow, Peter

    2007-01-01

    This article investigates very young children's use of a stylus-driven, electronic painting and drawing on the tablet PC. The authors compare their development in the use of this device with their use of other mark-making media, including those which derive from pencil and paper technologies and also with mouse-driven electronic paintbox programs.…

  13. The motive for sensory pleasure: enjoyment of nature and its representation in painting, music, and literature.

    Science.gov (United States)

    Eisenberger, Robert; Sucharski, Ivan L; Yalowitz, Steven; Kent, Robert J; Loomis, Ross J; Jones, Jason R; Paylor, Sarah; Aselage, Justin; Mueller, Meta Steiger; McLaughlin, John P

    2010-04-01

    Eight studies assessed the motive for sensory pleasure (MSP) involving a general disposition to enjoy and pursue pleasant nature-related experiences and avoid unpleasant nature-related experiences. The stated enjoyment of pleasant sights, smells, sounds, and tactile sensations formed a unitary construct that was distinct from sensation seeking, novelty preference, and need for cognition. MSP was found to be related to (a) enjoyment of pleasant nature scenes and music of high but not low clarity; (b) enjoyment of writings that portrayed highly detailed nature scenes; (c) enjoyment of pleasantly themed paintings and dislike of unpleasant paintings, as distinct from findings with Openness to Experience; (d) choice of pleasant nature scenes over exciting or intellectually stimulating scenes; (e) view duration and memory of artistically rendered quilts; (f) interest in detailed information about nature scenes; and (g) frequency of sensory-type suggestions for improvement of a museum exhibit.

  14. PIXE analysis of historical paintings: Is the gain worth the risk?

    Energy Technology Data Exchange (ETDEWEB)

    Calligaro, T. [Centre de recherche et de restauration des musées de France, C2RMF, Palais du Louvre – Porte des Lions, 14 Quai François Mitterrand, 75001 Paris (France); PSL Research University, Chimie ParisTech – CNRS, Institut de Recherche Chimie Paris, UMR8247, 75005 Paris (France); Fédération de recherche NewAGLAE, FR3506 CNRS – Ministère de la Culture – IRCP, Palais du Louvre, 75001 Paris (France); Gonzalez, V. [Centre de recherche et de restauration des musées de France, C2RMF, Palais du Louvre – Porte des Lions, 14 Quai François Mitterrand, 75001 Paris (France); PSL Research University, Chimie ParisTech – CNRS, Institut de Recherche Chimie Paris, UMR8247, 75005 Paris (France); Pichon, L. [Centre de recherche et de restauration des musées de France, C2RMF, Palais du Louvre – Porte des Lions, 14 Quai François Mitterrand, 75001 Paris (France); Fédération de recherche NewAGLAE, FR3506 CNRS – Ministère de la Culture – IRCP, Palais du Louvre, 75001 Paris (France)

    2015-11-15

    The PIXE analysis of easel paintings constitutes a challenging task. Despite recognized merits and a few emblematic applications, PIXE has never been routinely applied to these fragile, complex and precious targets. The present work discusses the place of PIXE in the study of easel paintings and opens up perspectives for a more systematic usage of this analytical technique. Progress achieved since decades in the implementation of PIXE to study such fragile cultural heritage artefacts is reviewed, notably at the LABEC laboratory in Italy and at the AGLAE facility of the C2RMF in France. Two specific techniques developed for paintings are detailed and exemplified on Renaissance painting masterpieces: differential PIXE for paint layers depth profiling and multi-scale elemental mapping for the imaging of pigment distribution. Beam-induced damage, a major concern, notably depends on the employed beam fluence in particle/cm{sup 2} or μC/cm{sup 2}. After recalling previous works on damage induced in chemical products comparable to pigments, we present the behaviour under different fluences of protons of a few MeV (1–300 μC/cm{sup 2}) of targets having high resemblance to historical easel paintings: pellets of specially synthesized lead white pigments, layers of lead white mixed with linseed oil and areas containing lead white of two 19th century paintworks. The results shed new lights on the behaviour of paintworks under the beam and pave the way to strategies for damage mitigation. In particular, the lowering of PIXE performance induced by the decrease of the beam fluence sets a trade-off between risk of damage and gained information which also impacts the PIXE scanning protocol for paintings. As an illustration of an adequate adjustment of this balance, we report the exploratory application of PIXE mapping to a large area of a 19th century easel painting without damage. The recorded elemental maps are compared to elemental maps collected on the same area using

  15. En-bloc excision debridement of spray paint injection injury to the ...

    African Journals Online (AJOL)

    Background: High pressure injection injuries to the hand are relatively uncommon. The potential and actual tissue injuries are often underestimated by the primary care giver. Patient: This is a report on a 27 year old dock worker who sustained a spray paint gun injury to the left hand with resulting digital neurovascular ...

  16. Preliminary studies of consolidation of wall paintings: synthesis and characterisation of nanolime

    Directory of Open Access Journals (Sweden)

    Penka I. Girginova

    2016-01-01

    Full Text Available In this publication, we report the synthesis and characterization of calcium and magnesium hydroxides nanoparticles for consolidation of mural paintings. Some preliminary results are discussed. This research is the initial part of our ongoing project which aims to develop new synthetic strategies towards novel and innovative materials for preservation and restoration of old renders.

  17. Biofouling growth in cold estuarine waters and evaluation of some chitosan and copper anti-fouling paints.

    Science.gov (United States)

    Pelletier, Emilien; Bonnet, Claudie; Lemarchand, Karine

    2009-07-14

    Ecological concerns about antifouling paints containing non-green tin and copper compounds have highlighted the need for environmentally friendly alternatives. We report here a field test conducted in estuarine waters over two months designed to evaluate the efficiency of a number of active natural and man-made chemical ingredients added into a silicon-polyurethane marine paint. Early steps of biofouling in cold seawater of the St. Lawrence Estuary (Canada) were observed. Analyses, including dry biomass, flow cytometry and spectrofluorimetry, demonstrated a short-term antibacterial action of chitosan-based paints although no significant anti-algal action was observed. Cuprous oxide paints were efficient against bacteria and algae invasion in the first two weeks, especially those with added organic biocides such as isothiazolone and copper pyrithione. However, the overall dry biomass and chlorophyll a content were similar for all chitosan-and copper-based paints after 63 days. Microscopic observations revealed variation in the highly diverse benthic diatom population including species Navicula, Melosira, Cocconeis, Nitshzcia, Fragilaria and Amphora. Results suggest no real long-term efficiency for tested antifouling paints and highlight a particular need for green antifouling ingredients that are active under northern estuarine conditions.

  18. Biofouling Growth in Cold Estuarine Waters and Evaluation of Some Chitosan and Copper Anti-Fouling Paints

    Directory of Open Access Journals (Sweden)

    Karine Lemarchand

    2009-07-01

    Full Text Available Ecological concerns about antifouling paints containing non-green tin and copper compounds have highlighted the need for environmentally friendly alternatives. We report here a field test conducted in estuarine waters over two months designed to evaluate the efficiency of a number of active natural and man-made chemical ingredients added into a silicon-polyurethane marine paint. Early steps of biofouling in cold seawater of the St. Lawrence Estuary (Canada were observed. Analyses, including dry biomass, flow cytometry and spectrofluorimetry, demonstrated a short-term antibacterial action of chitosan-based paints although no significant anti-algal action was observed. Cuprous oxide paints were efficient against bacteria and algae invasion in the first two weeks, especially those with added organic biocides such as isothiazolone and copper pyrithione. However, the overall dry biomass and chlorophyll a content were similar for all chitosan- and copper-based paints after 63 days. Microscopic observations revealed variation in the highly diverse benthic diatom population including species Navicula, Melosira, Cocconeis, Nitshzcia, Fragilaria and Amphora. Results suggest no real long-term efficiency for tested antifouling paints and highlight a particular need for green antifouling ingredients that are active under northern estuarine conditions.

  19. Emotion in Painting and Art Installations.

    Science.gov (United States)

    Konečni, Vladimir J

    2015-01-01

    Paintings are static 2-dimensional images with limited narrative means. On the basis of a critical analysis of the relevant laboratory scaling studies, museum studies, and neuroaesthetic work, the article reaches a negative conclusion about most paintings' ability to engage sufficiently with general viewers' associative-memory systems, so as to lead to identification and empathy, and induce fundamental psychobiological emotions. In contrast, designers of art installations can draw on subtle combinations of several classes of stimulus properties with psychological significance subsumable under the classical concept of the sublime (physical grandeur, rarity, an association with beauty and with biologically significant outcomes), so that some installations may induce the peak aesthetic emotional response, aesthetic awe--as defined in Aesthetic Trinity Theory (Konečni, 2005, 2011), along with the states of being moved and physiological thrills. The approach also involves an analytical skepticism about emotivism, defined as a culturological proclivity for unnecessary insertion of emotion into accounts of mental life and behavior, especially in the arts. Implications for the role of emotion theory in empirical aesthetics are examined.

  20. The leaching of lead from lead-based paint in landfill environments.

    Science.gov (United States)

    Wadanambi, Lakmini; Dubey, Brajesh; Townsend, Timothy

    2008-08-30

    Lead leaching from lead-based paint (LBP) was examined using standardized laboratory protocols and tests with leachate from actual and simulated landfill environments. Two different LBP samples were tested; leaching solutions included leachates from three municipal solid waste (MSW) landfills and three construction and demolition (C&D) debris landfills. The toxicity characteristic leaching procedure (TCLP) and the synthetic precipitation leaching procedure (SPLP) were also performed. Lead concentrations were many times higher using the TCLP compared to the SPLP and the landfill leachates. No significant difference (alpha=0.05) was observed in leached lead concentrations from the MSW landfill and C&D debris landfill leachates. The impact of other building materials present in LBP debris on lead leaching was examined by testing mixtures of LBP (2%) and different building materials (98%; steel, wood, drywall, concrete). The type of substrate present impacted lead leaching results, with concrete demonstrating the most dramatic impact; the lowest lead concentrations were measured in the presence of concrete under both TCLP and SPLP extractions.

  1. Salvador Dalí's paintings to introduce Quantum Mechanics concepts in High School

    Directory of Open Access Journals (Sweden)

    Rúbia de Fátima Antunes Martins Fernandes

    2017-08-01

    Full Text Available A few papers have presented results of teaching Quantum Mechanics in High School. As a high abstraction level is demanded, it is necessary to reconsider theoretical assumptions, approaches and methodologies, in order to reduce difficulties in its insertion. This paper presents the achievements of a research, which is a didactic proposal for High School comprising discussions about Quantum Mechanics, involving elements that relate Physics and some paintings of Salvador Dalí. Embracing the relations between Physics and Art allows us to approach and express the relations between scientific education and culture with alternative ways to enrich the knowledge meaning, also aiming to provide students with a broader view about the scientific knowledge construction in an intelligent dialogue with the world.  To do so, the proposal presents an operative methodology, approaching science as a historical and social knowledge to teach quantum mechanics, and it aims to make the student able to hypothesize, conceptualize, situate scientific explanations in time, in short, operate according to the provided tools. Working with the ways in which Physics, introduced as a cultural component, influences the interpretations of macro and microscopic phenomena and contributes to the understanding of Modern Physics, part of twentieth-century Physics. Therefore, adding cultural elements to Physics world seems to be increasingly necessary, as it seems to resignify it by rehumanizing its knowledge. In addition, using the historical context seems to give us a greater extensiveness to knowledge, since it also starts being part of a broader culture, beyond its scientific meaning.

  2. Characterization of aerosols produced by laser-matter interaction during paint-stripping experiments by laser

    International Nuclear Information System (INIS)

    Dewalle, P.

    2009-01-01

    Laser ablation is one of the physical processes that are being considered for paint stripping in possibly contaminated areas, especially for decommissioning and dismantling of nuclear facilities. In this regard, the knowledge of 'ablation products', consisting of particles and gases, is an important issue.The numeric and weight concentration of particles, their size distribution, their morphology and their density have been determined for laser ablation of two wall paints. The main gas species have also been identified. The aerosol is composed of nano-particles, of which the number is predominant, and sub-micron particles. Their morphologies and their chemical composition are very distinct: carbon aggregates have been identified, as well as spherical particles of titanium dioxide. These results show that nano-scale aggregates come from the vaporization of the paint polymer, whereas sub-micron particles are due to mechanical ejection of titanium dioxide particles. The expansion of the plume resulting from laser-paint interaction has been monitored by means of three optical techniques: light extinction, scattering and emission. The frames show the propagation of a shock wave followed by the ejection of matter with a specific 'mushroom' shape. Measurements based on these results show that the peripheral part of the plume contains the primary particles of carbon aggregates; it is the warmest area, which reaches a few thousands Kelvin degrees. Its central part is composed of titanium dioxide spherical particles. (author) [fr

  3. Historical evolution of oil painting media: A rheological study

    Science.gov (United States)

    de Viguerie, Laurence; Ducouret, Guylaine; Lequeux, François; Moutard-Martin, Thierry; Walter, Philippe

    2009-09-01

    Rheology is the science of flow, which is a phenomenon found in every painting operation, such as decorative paintings or protective coatings. In this article, the principles of rheology as applied to paintings and coatings are recalled in a first part and the rheological criteria required in the paint industry presented. Indeed, different flow behaviours leads to different finishes. The same procedure and techniques as in industry can be employed to explain some evolutions in oil painting aspects over the centuries. The first recipes for oil painting indicate the use of treated oil, resins and spirits. This article deals with the evolution of the composition of these systems as media for oil painting, according to rheological clues. During the Renaissance period, the media used were Newtonian or slightly shear thinning and allowed one a perfect levelling. Then techniques changed, paints became more opaque with less addition of oil/resin media, and brushstrokes appeared visible. Some preparations containing lead, oil and mastic resin, whose flow behaviour is closed to those required in industry, may have appeared during the 17th century and are still used and sold today. To cite this article: L. de Viguerie et al., C. R. Physique 10 (2009).

  4. Non-Photorealistic Rendering in Chinese Painting of Animals

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A set of algorithms is proposed in this paper to automatically transform 3D animal models to Chinese painting style. Inspired by real painting process in Chinese painting of animals, we divide the whole rendering process into two parts: borderline stroke making and interior shading. In borderline stroke making process we first find 3D model silhouettes in real-time depending on the viewing direction of a user. After retrieving silhouette information from all model edges, a stroke linking mechanism is applied to link these independent edges into a long stroke. Finally we grow a plain thin silhouette line to a stylus stroke with various widths at each control point and a 2D brush model is combined with it to simulate a Chinese painting stroke. In the interior shading pipeline, three stages are used to convert a Gouraud-shading image to a Chinese painting style image: color quantization, ink diffusion and box filtering. The color quantization stage assigns all pixels in an image into four color levels and each level represents a color layer in a Chinese painting. Ink diffusion stage is used to transfer inks and water between different levels and to grow areas in an irregular way. The box filtering stage blurs sharp borders between different levels to embellish the appearance of final interior shading image. In addition to automatic rendering, an interactive Chinese painting system which is equipped with friendly input devices can be also combined to generate more artistic Chinese painting images manually.

  5. 33 CFR 118.140 - Painting bridge piers.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Painting bridge piers. 118.140 Section 118.140 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.140 Painting bridge piers. The District Commander may require...

  6. What You Should Know about Using Paint Strippers

    Science.gov (United States)

    ... is readily absorbed through the skin and may cause health problems. Adverse health effects in the developing fetus have been noted in laboratory animals exposed to some of the chemicals in paint strippers. Therefore, women of child-bearing age who work with or use paint strippers on a regular ...

  7. Sanding dust from nanoparticle-containing paints: Physical characterisation

    International Nuclear Information System (INIS)

    Koponen, I K; Jensen, K A; Schneider, T

    2009-01-01

    Increasing use of nanoparticles in different industrial applications has raised a new potential health risk to the workers as well as to the consumers. This study investigates the particle size distributions of sanding dust released from paints produced with and without engineered nanoparticles. Dust emissions from sanding painted plates were found to consist of five size modes; three modes under 1 μm and two modes around 1 and 2 μm. We observed that the sander was the only source of particles smaller than 50 nm and they dominated the number concentration spectra. Mass and surface area spectra were dominated by the 1 and 2 μm modes. Addition of nanoparticles caused only minor changes in the geometric mean diameters of the particle modes generated during sanding of two paints doped with 17 nm TiO2 and 95 nm Carbon Black nanoparticles as compared to the size modes generated during sanding a conventional reference paint. However, the number concentrations in the different size modes varied considerably in between the two NP-doped paints and the reference paint. Therefore, from a physical point of view, there may be a difference in the exposure risk during sanding surfaces covered with nanoparticle-based paints as compared to sanding conventional paints.

  8. Gerbrand Bredero wants to borrow a painting: proleptic negotiation

    NARCIS (Netherlands)

    Jansen, J.

    2013-01-01

    In a letter to Badens, his painting teacher, Gerbrand Bredero asks for the loan of a painting to make a copy of it. The act of writing (a letter) requires a proactive role in managing the reader’s reactions. In what at first sight may look like a simple, insignificant and most of all polite letter,

  9. 13 CFR 120.173 - Lead-based paint.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Lead-based paint. 120.173 Section 120.173 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Policies Applying to All Business Loans Requirements Imposed Under Other Laws and Orders § 120.173 Lead-based paint. If...

  10. The Monetary Appreciation of Paintings : From Realism to Magritte

    NARCIS (Netherlands)

    Renneboog, L.D.R.; van Houte, T.

    1999-01-01

    This study investigates how investments in painted arts compare to those in stocks in terms of risk return trade off using Sharpe and Treynor ratios and Markowitz efficient frontiers. A large database was analysed consisting of more than 10500 auction prices of Belgian painted art over the period

  11. Finite Element Modeling of Vibrations in Canvas Paintings

    NARCIS (Netherlands)

    Chiriboga Arroyo, P.G.

    2013-01-01

    Preventing vibration damage from occurring to valuable and sensitive canvas paintings is of main concern for museums and art conservation institutions. This concern has grown in recent years due to the increasing demand of paintings for exhibitions worldwide and the concomitant need for their

  12. Images of power in contemporary Nigerian paintings | Gbaden ...

    African Journals Online (AJOL)

    Contemporary Nigerian paintings are replete with images and notions of power and power relations among the ethnically pluralistic peoples of Nigeria. This paper presents a select number of paintings that best manifest the idea of how power is depicted and how power influences human thinking and aspiration from a ...

  13. A Hybrid Model for Forecasting Sales in Turkish Paint Industry

    Directory of Open Access Journals (Sweden)

    Alp Ustundag

    2009-12-01

    Full Text Available Sales forecasting is important for facilitating effective and efficient allocation of scarce resources. However, how to best model and forecast sales has been a long-standing issue. There is no best forecasting method that is applicable in all circumstances. Therefore, confidence in the accuracy of sales forecasts is achieved by corroborating the results using two or more methods. This paper proposes a hybrid forecasting model that uses an artificial intelligence method (AI with multiple linear regression (MLR to predict product sales for the largest Turkish paint producer. In the hybrid model, three different AI methods, fuzzy rule-based system (FRBS, artificial neural network (ANN and adaptive neuro fuzzy network (ANFIS, are used and compared to each other. The results indicate that FRBS yields better forecasting accuracy in terms of root mean squared error (RMSE and mean absolute percentage error (MAPE.

  14. Design, construction, quality checks and test results of first resistive-Micromegas read-out boards for the ATLAS experiment

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00215943; The ATLAS collaboration; Kuger, Fabian

    2015-01-01

    The development work carried out at CERN to push the Micromegas technology to a new frontier is now coming to an end. The construction of the first read-out boards for the upgrade of the ATLAS muon system will demonstrate in full-scale the feasibility of this ambitious project. The read-out boards, representing the heart of the detector, are manufactured in industries, making the Micromegas for ATLAS the first MPGD for a large experiment with a relevant part industrially produced. The boards are 50 cm wide and up to 220 cm long, carrying copper strips 315 μm wide with 415 μm pitch. Interconnected resistive strips, having the same pattern as the copper strips, provide spark protection. The boards are completed by the creation of cylindrical pillars 128 μm high, 280 μm in diameter and arranged in a triangular array 7 mm aside. The total number of boards to be produced for ATLAS is 2048 of 32 different types. We will review the main design parameters of the read-out boards for the ATLAS Micromegas, following...

  15. Using spatial information about recurrence risk for robust optimization of dose-painting prescription functions

    International Nuclear Information System (INIS)

    Bender, Edward T.

    2012-01-01

    Purpose: To develop a robust method for deriving dose-painting prescription functions using spatial information about the risk for disease recurrence. Methods: Spatial distributions of radiobiological model parameters are derived from distributions of recurrence risk after uniform irradiation. These model parameters are then used to derive optimal dose-painting prescription functions given a constant mean biologically effective dose. Results: An estimate for the optimal dose distribution can be derived based on spatial information about recurrence risk. Dose painting based on imaging markers that are moderately or poorly correlated with recurrence risk are predicted to potentially result in inferior disease control when compared the same mean biologically effective dose delivered uniformly. A robust optimization approach may partially mitigate this issue. Conclusions: The methods described here can be used to derive an estimate for a robust, patient-specific prescription function for use in dose painting. Two approximate scaling relationships were observed: First, the optimal choice for the maximum dose differential when using either a linear or two-compartment prescription function is proportional to R, where R is the Pearson correlation coefficient between a given imaging marker and recurrence risk after uniform irradiation. Second, the predicted maximum possible gain in tumor control probability for any robust optimization technique is nearly proportional to the square of R.

  16. Atomic Oxygen Treatment as a Method of Recovering Smoke Damaged Paintings

    Science.gov (United States)

    Rutledge, Sharon K.; Banks, Bruce A.; Forkapa, Mark; Stueber, Thomas; Sechkar, Edward; Malinowski, Kevin

    1998-01-01

    Smoke damage, as a result of a fire, can be difficult to remove from some types of painting media without causing swelling, leaching or pigment movement or removal. A non-contact technique has been developed which can remove soot from the surface of a painting by use of a gently flowing gas containing atomic oxygen. The atomic oxygen chemically reacts with the soot on the surface creating gasses such as carbon monoxide and carbon dioxide which can be removed through the use of an exhaust system. The reaction is limited to the surface so that the process can be timed to stop when the paint layer is reached. Atomic oxygen is a primary component of the low Earth orbital environment, but can be generated on Earth through various methods. This paper will discuss the results of atomic oxygen treatment of soot exposed acrylic gesso, ink on paper, and a varnished oil painting. Reflectance measurements were used to characterize the surfaces before and after treatment.

  17. Multidirectional cross-species painting illuminates the history of karyotypic evolution in Perissodactyla.

    Science.gov (United States)

    Trifonov, Vladimir A; Stanyon, Roscoe; Nesterenko, Anastasia I; Fu, Beiyuan; Perelman, Polina L; O'Brien, Patricia C M; Stone, Gary; Rubtsova, Nadezhda V; Houck, Marlys L; Robinson, Terence J; Ferguson-Smith, Malcolm A; Dobigny, Gauthier; Graphodatsky, Alexander S; Yang, Fengtang

    2008-01-01

    The order Perissodactyla, the group of odd-toed ungulates, includes three extant families: Equidae, Tapiridae, and Rhinocerotidae. The extremely rapid karyotypic diversification in perissodactyls has so far prevented the establishment of genome-wide homology maps between these three families by traditional cytogenetic approaches. Here we report the first genome-wide comparative chromosome maps of African rhinoceroses, four tapir species, four equine species, and humans. These maps were established by multidirectional chromosome painting, with paint probes derived from flow-sorted chromosomes of Equus grevyi, Tapirus indicus, and Ceratotherium simum as well as painting probes from horse and human. The Malayan tapir (Tapirus indicus), Baird's tapir (T. bairdii), mountain tapir (T. pinchaque), lowland tapir (T. terrestris), and onager (E. hemionus onager), were studied by cross-species chromosome painting for the first time. Our results, when integrated with previously published comparative chromosome maps of the other perissodactyl species, have enabled the reconstruction of perissodactyl, ceratomorph, and equid ancestral karyotypes, and the identification of the defining evolutionary chromosomal rearrangements along each lineage. Our results allow a more reliable estimate of the mode and tempo of evolutionary chromosomal rearrangements, revealing a striking switch between the slowly evolving ceratomorphs and extremely rapidly evolving equids.

  18. Investigation of Environmental-friendly Technology for a Paint Industry Wastewater Plant in Turkey

    Directory of Open Access Journals (Sweden)

    Pelin YAPICIOĞLU

    2018-02-01

    Full Text Available Paint manufacturing process has several unfavorable aspects to the environment in Turkey. One of these impacts is wastewater treatment. Paint wastewater contains huge amounts of toxic chemical substances, bio refractory compounds, pigments and microorganisms. So, advanced treatment requirement is available to dispose of colour, microorganisms and chemical oxygen demand (COD. The high organic content of wastewater causes serious environmental challenges and contamination for the living organisms and the ecosystem in the receiver media unless it is treated adequately. In this context, the treatment process to be implemented should be preferred in such a way as to give the least damage to the environment. In this study, three treatment scenarios that contain electrocoagulation (Scenario-1, Fenton process (Scenario-2 and membrane distillation (Scenario-3 have been created for wastewater treatment facility of a paint industry in Turkey. For three scenarios, environmental impact assessment has been carried out with Fine-Kinney method. It is aimed to choose best environmental technology before investment. The evaluation results revealed that Scenario-2 has the less environmental impacts that total impact value is 556. Scenario-1 has the highest total impact value as 756, relatively. Total impact value related to Scenario-3 is 637. According to the evaluation results, Fenton process is the best environmental-friendly treatment technology for wastewater treatment of a paint industry in Turkey.

  19. Fly ash based zeolitic pigments for application in anticorrosive paints

    International Nuclear Information System (INIS)

    Shaw, Ruchi; Tiwari, Sangeeta

    2016-01-01

    The purpose of this work is to evaluate the utilization of waste fly ash in anticorrosive paints. Zeolite NaY was synthesized from waste fly ash and subsequently modified by exchanging its nominal cation Na + with Mg 2+ and Ca 2+ ions. The metal ion exchanged zeolite was then used as anticorrosive zeolitic pigments in paints. The prepared zeolite NaY was characterized using X-Ray diffraction technique and Scanning electron microscopy. The size, shape and density of the prepared fly ash based pigments were determined by various techniques. The paints were prepared by using fly ash based zeolitic pigments in epoxy resin and the percentages of pigments used in paints were 2% and 5%. These paints were applied to the mild steel panels and the anticorrosive properties of the pigments were assessed by the electrochemical spectroscopy technique (EIS).

  20. Large-scale quantitative analysis of painting arts.

    Science.gov (United States)

    Kim, Daniel; Son, Seung-Woo; Jeong, Hawoong

    2014-12-11

    Scientists have made efforts to understand the beauty of painting art in their own languages. As digital image acquisition of painting arts has made rapid progress, researchers have come to a point where it is possible to perform statistical analysis of a large-scale database of artistic paints to make a bridge between art and science. Using digital image processing techniques, we investigate three quantitative measures of images - the usage of individual colors, the variety of colors, and the roughness of the brightness. We found a difference in color usage between classical paintings and photographs, and a significantly low color variety of the medieval period. Interestingly, moreover, the increment of roughness exponent as painting techniques such as chiaroscuro and sfumato have advanced is consistent with historical circumstances.

  1. Automotive Painting Technology A Monozukuri-Hitozukuri Perspective

    CERN Document Server

    Salazar, Abraham; Saito, Kozo

    2013-01-01

    This book offers unique and valuable contributions to the field. It offers breadth and inclusiveness. Most existing works on automotive painting cover only a single aspect of this complex topic, such as the chemistry of paint or paint booth technology. Monozukuri and Hitozukuri are Japanese terms that can be translated as “making things” and “developing people” but their implications in Japanese are richer and more complex than this minimal translation would indicate. The Monozukuri-Hitozukuri perspective is drawn from essential principles on which the Toyota approach to problem-solving and continuous improvement is based. From this perspective, neither painting technology R&D nor painting technology use in manufacturing can be done successfully without integrating technological and human concerns involved with making and learning in the broadest sense, as the hyphen is meant to indicate. The editors provide case studies and examples -- drawn from Mr. Toda’s 33 years of experience with automotiv...

  2. Set Up of an Automated Multi-Colour System for Interior Wall Painting

    Directory of Open Access Journals (Sweden)

    Berardo Naticchia

    2008-11-01

    Full Text Available It is shared that construction projects are getting bigger and more complex, hence also the productivity of the construction industry must be improved, while preserving its labour from hazardous job sites. Such requirements can be accomplished by the adoption of robotized products, which, however, need to be quickly developed and marketed. In this paper, first the issue of a new miniature laboratory for developing lightweight and well-coordinated robotized systems is pursued, then a novel robot device for high quality multi-colour interior wall painting carried by a robot arm is developed and successfully tested. Thanks to the new 1:6 scaled down laboratory and its six degree of freedom robot arm on an hexapod for horizontal moves, we tested the opportunity to introduce also in the building sector miniature robots that can change the ergonomics standardly adopted by construction workers. It is analyzed how and why switching from full size to miniature robots is convenient in construction. In addition, a new system adding further features to robotized painting has been conceived. Our new multi-colour spraying end-tool was developed and fixed on the robot arm, in order to be able to reproduce coloured artworks. Finally, a methodology to reproduce colours from digital format of artworks is presented, showing how accurate and efficient is this new robotized spraying device.

  3. Set up of an Automated Multi-Colour System for Interior Wall Painting

    Directory of Open Access Journals (Sweden)

    Berardo Naticchia

    2007-12-01

    Full Text Available It is shared that construction projects are getting bigger and more complex, hence also the productivity of the construction industry must be improved, while preserving its labour from hazardous job sites. Such requirements can be accomplished by the adoption of robotized products, which, however, need to be quickly developed and marketed. In this paper, first the issue of a new miniature laboratory for developing lightweight and well-coordinated robotized systems is pursued, then a novel robot device for high quality multi-colour interior wall painting carried by a robot arm is developed and successfully tested. Thanks to the new 1:6 scaled down laboratory and its six degree of freedom robot arm on an hexapod for horizontal moves, we tested the opportunity to introduce also in the building sector miniature robots that can change the ergonomics standardly adopted by construction workers. It is analyzed how and why switching from full size to miniature robots is convenient in construction. In addition, a new system adding further features to robotized painting has been conceived. Our new multi-colour spraying end-tool was developed and fixed on the robot arm, in order to be able to reproduce coloured artworks. Finally, a methodology to reproduce colours from digital format of artworks is presented, showing how accurate and efficient is this new robotized spraying device.

  4. 76 FR 27044 - Lead-Based Paint Renovation, Repair and Painting, and Pre-Renovation Education Activities in...

    Science.gov (United States)

    2011-05-10

    ..., Repair and Painting, and Pre- Renovation Education Activities in Target Housing and Child Occupied...), and a lead-based paint pre-renovation education program in accordance with section 406(b) of TSCA, 15... renovation and remodeling activities of pre-1978 housing and child-occupied facilities in the State of...

  5. The Influence of Used Construction Material and Its Thickness on the Neutron Dose Rate Around the Linear Accelerator - Experimental Results

    International Nuclear Information System (INIS)

    Krpan, I; Miklavcic, I.; Poje, M.; Radolic, V.; Vukovic, B.; Zivkovic, A.; Faj, D.; Ivkovic, A.

    2013-01-01

    Since linear accelerators for medical radiotherapy do not have active radioactive sources it makes them adequate from the radioprotection point of view. However, when operating at the energy higher than 10 MeV, they can become a source of unwanted neutron radiation in the giant dipole resonance reaction between the photon beam and the accelerator head material. Neutrons created in this reaction are almost isotropic in direction with an energy range between 700 keV and 1 MeV. During the accelerator installation and different phases of the construction work around the accelerator, a neutron dose rate at several important locations was investigated. Both passive (solid state nuclear track etched detectors - CR 39 and/or LR-115 with the 10B foil) and active detectors (Thermo Biorem FHT 752) were used. A higher photon dose rate was measured around the accelerator facility. An effective photon dose reduction was achieved using steel plates. However, this was the secondary source of neutrons in the reaction between the photons and steel plates, since higher values were measured. Neutron reduction was done by additional layers of barite concrete. A very conservative assessment of the effective dose was done for the medical personnel inside the control room. At the accelerator extreme operating regime (fixed accelerator direction - gantry angle, highest energy possible used), the neutron dose rate in the control room of 12 μSv/h was measured. Knowing the number of working days and number of patients per technician (per day), an exposure to the neutron dose of 1,1 mSv per year was calculated.(author)

  6. Improved Conjugate Gradient Bundle Adjustment of Dunhuang Wall Painting Images

    Science.gov (United States)

    Hu, K.; Huang, X.; You, H.

    2017-09-01

    Bundle adjustment with additional parameters is identified as a critical step for precise orthoimage generation and 3D reconstruction of Dunhuang wall paintings. Due to the introduction of self-calibration parameters and quasi-planar constraints, the structure of coefficient matrix of the reduced normal equation is banded-bordered, making the solving process of bundle adjustment complex. In this paper, Conjugate Gradient Bundle Adjustment (CGBA) method is deduced by calculus of variations. A preconditioning method based on improved incomplete Cholesky factorization is adopt to reduce the condition number of coefficient matrix, as well as to accelerate the iteration rate of CGBA. Both theoretical analysis and experimental results comparison with conventional method indicate that, the proposed method can effectively conquer the ill-conditioned problem of normal equation and improve the calculation efficiency of bundle adjustment with additional parameters considerably, while maintaining the actual accuracy.

  7. IMPROVED CONJUGATE GRADIENT BUNDLE ADJUSTMENT OF DUNHUANG WALL PAINTING IMAGES

    Directory of Open Access Journals (Sweden)

    K. Hu

    2017-09-01

    Full Text Available Bundle adjustment with additional parameters is identified as a critical step for precise orthoimage generation and 3D reconstruction of Dunhuang wall paintings. Due to the introduction of self-calibration parameters and quasi-planar constraints, the structure of coefficient matrix of the reduced normal equation is banded-bordered, making the solving process of bundle adjustment complex. In this paper, Conjugate Gradient Bundle Adjustment (CGBA method is deduced by calculus of variations. A preconditioning method based on improved incomplete Cholesky factorization is adopt to reduce the condition number of coefficient matrix, as well as to accelerate the iteration rate of CGBA. Both theoretical analysis and experimental results comparison with conventional method indicate that, the proposed method can effectively conquer the ill-conditioned problem of normal equation and improve the calculation efficiency of bundle adjustment with additional parameters considerably, while maintaining the actual accuracy.

  8. EPR spectroscopy can help with paint pigment provenance

    International Nuclear Information System (INIS)

    Troup, G.J.; Hutton, D.R.

    2000-01-01

    Full text: The microwave magnetic spectroscopic technique EPR can be used to determine the presence of paramagnetic impurities in paint pigments, and the purity of composition regarding the main colourant. Hence EPR can help determine provenance of pigments, just as it can for gemstones. Specimens of Lapis Lazuli (synthetic, Afghanistan, Chile, Greenland) showed quite recognisably different spectra, at room temperature, in a Varian E-12 X-band spectrometer (9.1 GHz frequency). Similarly, specimens of yellow ochre, two imported into Australia, one North Australian, another 95% pure Goethite, showed recognisably different spectra. The North Australian one uniquely gave a known radiation damage signal from quartz, perhaps to be expected, given the abundance of radioactive ores in the region. Further samples have been obtained and the results from these will be reported

  9. Nanorestore® for the consolidation of wall paintings

    Directory of Open Access Journals (Sweden)

    Sara Di Gregorio

    2010-11-01

    Full Text Available Cet article présente les résultats d’un projet de recherches sur l’effet de l’application du produit Nanorestore®, dispersion de nanoparticules de chaux dans l’alcool isopropylique, pour la consolidation des peintures murales ; il évalue l’influence des conditions environnementales externes (UR et présence des sels en particulier sur le processus de carbonatation.This paper presents the results of an investigation project on the use of Nanorestore®, a dispersion of nanolime in isopropyl alcohol, used for the consolidation of wall paintings. The influence of environmental conditions outside the wall (high humidity environments and high presence of hygroscopic salts on carbonation process was considered.

  10. Chemical analysis for waste management in paint industries

    International Nuclear Information System (INIS)

    Nawaz, Z.; Naveed, S.; Shiekh, N.A.; Sagheer, K.

    2005-01-01

    The chemical analysis of paint industries waste has been carried out; the main emission sources are the heating of raw materials and lacquer. Also the waste from other applications and production contains high concentration of heavy metals, VOC's, COD, TDS with notable acidity and alkalinity. Based on the analysis it was observed that the major losses of production could be minimized. Further toxic effects of the waste material can be minimized. In this reference measures to minimize production losses should be adopted along with the proper management. These laboratory results also lead to the areas of emissions and waste production during manufacturing process. Solutions have been proposed for process development and integrated waste minimization. (author)

  11. Characterization and origin of black and red Magdalenian pigments from Grottes de la Garenne (Vallée moyenne de la Creuse-France): a mineralogical and geochemical approach of the study of prehistorical paintings

    OpenAIRE

    Jezequel , Pierre; Wille , Guillaume; Bény , Claire; Delorme , Fabian; Jean-Prost , Véronique; Cottier , Roger; Breton , Jean; Duré , Frédéric; Despriée , Jackie

    2011-01-01

    International audience; Pigments sampled from wall paintings and from crayons taken on the floor, at the Grottes de la Garenne (Saint-Marcel e Indre, France) have been analyzed and characterized by infrared spectroscopy, Raman micro-spectroscopy, X-ray diffraction, ICP/MS and analytical TEM. The red pigment used for the wall paintings is mainly composed by hematite, clays, carbon matter and carbonates. Results on the red pigments show that the compositions of the paintings are similar to that...

  12. Characterization of Ancient Egyptian Wall Paintings, the Excavations of Cairo University at Saqqara

    Directory of Open Access Journals (Sweden)

    Hussein MAREY MAHMOUD

    2011-09-01

    Full Text Available The present study aims at characterizing some Egyptian wall paintings discovered during the excavations of Cairo University (since 1988 and recently in 2005 at Saqqara area in the south of Cairo. There, a number of tombs dating back to the 19th dynasty (c.1293–1185 BC were discovered. The walls of these tombs are carved with bass and raised reliefs and painted with different colours. The characterization of the wall paintings was done by means of optical microscopy (OM, scanning electron microscopy (backscattered electron mode, BSE equipped with an energy dispersive X-ray detector (EDS, micro XRF spectrometry (µ-XRF, and X-ray diffraction analysis (XRD. The analysis of the examined samples indicated that the blue pigment is Egyptian blue (Cuprorivaite, the green pigment is Egyptian green, the red pigment is red ochre, and the yellow pigment is a blended layer of yellow ochre and orpiment (As2S3. The results will help in providing an image concerning some painting materials used during the new Kingdom in ancient Egypt

  13. X-ray fluorescence and computed radiography analysis of a famous brazilian painting from XIX century

    International Nuclear Information System (INIS)

    Calza, Cristiane; Oliveira, Davi F.; Rocha, Henrique S.; Lopes, Ricardo Tadeu

    2009-01-01

    This work used Energy Dispersive X-Ray Fluorescence (EDXRF) and Computed Radiography (CR) to evaluate the general conditions of the painting 'Gioventu' (Eliseu Visconti, 1898), identifying possible problems, areas that revealed signs of previous retouchings and the pigments used by the artist. EDXRF measurements were carried out with a portable system consisting of an X-ray tube Oxford TF3005 with W anode, operating at 25 kV and 100 μA, and a Si-PIN XR-100CR detector from Amptek. Several spectra were obtained in each color, with an acquisition time of 300 s and a beam collimation of 2 mm. The spectra were analyzed using the software QXAS-AXIL (IAEA). The results revealed that the drawings were made over a preparatory layer of lead white. Some pigments identified were: yellow, red and brown ochre; umbra; vermilion; cobalt blue; etc. The experimental setup used in the CR analysis consisted of an Oxford X-ray source, operating at 50 kV and 200 μA, placed at 85 cm from the painting, a GE CR 50P portable computed radiography scanner and a Fuji imaging plate detector. The exposure time was 600 s. The radiographic images revealed that the painting was in a good state of conservation and also a complete composition hidden underneath the visible paint layer.(author)

  14. Western European influences on Post-Byzantine panel painting technique through binding media identification

    International Nuclear Information System (INIS)

    Kouloumpi, E.; Lawson, G.; Pavlidis, B.

    2006-01-01

    Post-Byzantine is called the period after the invasion of the Ottomans in Constantinople, the capital of Byzantium in 1453, which lasted until the establishment of the first Greek State in 1836. The Post - Byzantine era is one of the most important artistic periods of the Neo-Hellenic Pictorial Art, since, through cultural exchanges with Western Europe, it sets the fundaments for oil painting. The thematology changes from religious to civil, the technique changes from egg yolk to egg-oil emulsion in order to end up to pure oil painting and finally, it opens 'the gates' for the modern artistic movements of the world. The current research is focused on the study of the effects of western influences on the technique and pictorial characteristics of the post-Byzantine icons by the study of any changes in the pigment's binding media through scientific analyses (SEM-EDX, micro-FTIR and GC), as well as of any changes in the painting style of the icons through comparison with both Byzantine and western painting standards. Research never ends and the results of this work give rise to further analysis, in order to throw some light to this transitional period of art. (Author)

  15. Super-cool paints: optimizing composition with a modified four-flux model

    Science.gov (United States)

    Gali, Marc A.; Arnold, Matthew D.; Gentle, Angus R.; Smith, Geoffrey B.

    2017-09-01

    The scope for maximizing the albedo of a painted surface to produce low cost new and retro-fitted super-cool roofing is explored systematically. The aim is easy to apply, low cost paint formulations yielding albedos in the range 0.90 to 0.95. This requires raising the near-infrared (NIR) spectral reflectance into this range, while not reducing the more easily obtained high visible reflectance values. Our modified version of the four-flux method has enabled results on more complex composites. Key parameters to be optimized include; fill factors, particle size and material, using more than one mean size, thickness, substrate and binder materials. The model used is a variation of the classical four-flux method that solves the energy transfer problem through four balance differential equations. We use a different approach to the characteristic parameters to define the absorptance and scattering of the complete composite. This generalization allows extension to inclusion of size dispersion of the pigment particle and various binder resins, including those most commonly in use based on acrylics. Thus, the pigment scattering model has to take account of the matrix having loss in the NIR. A paint ranking index aimed specifically at separating paints with albedo above 0.80 is introduced representing the fraction of time at a sub-ambient temperature.

  16. Effects of gamma rays on a restored painting from the XVIIth century

    International Nuclear Information System (INIS)

    Rizzo, M.M.; Machado, L.D.B.; Borrely, S.I.; Sampa, M.H.O.; Rela, P.R.; Farah, J.P.S.; Schumacher, R.I.

    2002-01-01

    The subject of this study is a Peruvian painting from the 17th century, which has been recently restored and then contaminated by mould. It received different unsuccessful treatments. Therefore, radiation process was suggested as an alternative once it is an effective technology for decontamination and conservation purposes. The aim of this study is to investigate the influence of irradiation process on the original painting and on the products used in the restoration process. These products were irradiated with 60 Co gamma rays applying doses in the range of 6-25 kGy. The polymeric materials were characterized by thermal analysis techniques before and after irradiation. The colour of the pigments irradiated and non-irradiated were compared by spectrophotometric analysis. Small samples removed of the original painting were also irradiated and investigated. The results obtained until now allowed concluding that the irradiation with the appropriated dose of 6.0 kGy, according to the literature, will not damage the restored painting

  17. Identification of additives in poly(vinylacetate) artist's paints using PY-GC-MS.

    Science.gov (United States)

    Silva, Miguel F; Doménech-Carbó, Maria Teresa; Fuster-López, Laura; Mecklenburg, Marion F; Martin-Rey, Susana

    2010-05-01

    Commercial poly(vinyl acetate) (PVAc) paint formulations for artists include a number of compounds in addition to the PVAc polymer and pigments to improve the physical and chemical properties of the resulting product. Among the most common additives are surfactants, coalescing agents, defoamers, freeze-thaw agents and thickeners. These products significantly influence the behaviour of the dried film. Nevertheless, they are usually difficult to detect with conventional analytical methods given their low concentration. In order to identify these additives, present in the dried film as minor components, an analytical method based on in situ thermally assisted pyrolysis-silylation gas chromatography-mass spectrometry (GC-MS) using hexamethyldisilazane as a derivatisation reagent is proposed. This method improves the conventional GC-MS analysis performed by direct pyrolysis and enables the simultaneous identification of the PVAc binding medium and the additives included by the manufacturer in the commercial paint. Five different commercial PVAc paints have been analysed, namely, armour green, burnt umber, oriental red, raw umber and white from Flashe. Internal plasticiser VeoVa consisting of C(10) fatty acids with highly branched chains has been recognised from the MS spectra. On the other hand, the differences found in the additive content of the studied paints, in particular the poly(ethylene glycol)-type surfactant, are in good agreement with their mechanical properties.

  18. Development of a portable ESPI system for the analysis in situ of mural paintings

    Science.gov (United States)

    Boaglio, E.; Lamas, J.; López, Ana J.; Ramil, A.; Pereira, L.; Prieto, B.; Silva, B.

    2012-10-01

    The use of Electronic Speckle Pattern Interferometry (ESPI) is well documented in the literature as a non-destructive technique for structural diagnostics in the field of cultural heritage.. In the case of mural paintings the lack of adhesion between the plaster and the mural support is one of the most important risk factors that threaten their conservation. With this non-invasive method it is possible to detect detachments and cracks in the paintings before they become visible The objective of this work is the development of ESPI portable equipment based on a fibre interferometer for in situ qualitative analysis of mural paintings. The novelty of the presented set up is the use of a variable ratio coupler which makes the system more immune to vibrations and allows for better use of available light compared with the equivalent of free air guided. This configuration simplifies the arrangement and makes it possible to obtain ESPI interferograms with high contrast; moreover, the use of a ceramic heater as excitation source enables the analysis during the heating. Preliminary results obtained in laboratory conditions have shown that detachments and cracks can be successfully detected on model samples of the wall paintings.

  19. Role of the masonry in paintings during a seismic event analyzed by infrared vision

    Science.gov (United States)

    López, F.; Sfarra, S.; Ibarra-Castanedo, C.; Ambrosini, D.; Maldague, X. P. V.

    2015-06-01

    In this work, pulsed phase thermography (PPT), principal component thermography (PCT), and partial least squares thermography (PLST) techniques were applied in order to detect the masonry texture, as well as to map the subsurface damages formed beneath three different mural paintings. The latter were inspected after the 2009 earthquake, i.e., the seismic event that devastated L'Aquila City (Italy) and its surroundings. The mural supports explored by infrared thermography (IRT) are constituted by a single leaf, and the sides of the inspected paintings are confined by marble frames or by buried horizontal and vertical structures. Hence, the analyzed objects can be considered as monolithic structures. IRT can help to understand the masonry morphology, e.g. if there exist structural continuity between the arriccio layer (the first coat of plaster) and the support. In the present case, the heating phase was provided by lamps or propane gas and feature detection was enhanced by advanced signal processing. A comparison among the results is presented. Two of the three objects analyzed, painted by the art masters Serbucci and Avicola, are preserved inside Santa Maria della Croce di Roio Church in Roio Poggio (L'Aquila, Italy); they were executed on two masonries built in different periods. The last one was realized in Montorio al Vomano (Teramo, Italy) on the internal cloister of the Zoccolanti's Church (undated). The villages are separated by 50 km as the crow flies. Finally, near-infrared reflectography (NIRR) technique was also used to investigate the condition of the painting layer.

  20. Surface analysis characterisation of gum binders used in modern watercolour paints

    Science.gov (United States)

    Sano, Naoko; Cumpson, Peter J.

    2016-02-01

    Conducting this study has demonstrated that not only SEM-EDX but also XPS can be an efficient tool for characterising watercolour paint surfaces. We find that surface effects are mediated by water. Once the powdered components in the watercolour come into contact with water they dramatically transform their chemical structures at the surface and show the presence of pigment components with a random dispersion within the gum layer. Hence the topmost surface of the paint is confirmed as being composed of the gum binder components. This result is difficult to confirm using just one analytical technique (either XPS or SEM-EDX). In addition, peak fitting of C1s XPS spectra suggests that the gum binder in the commercial watercolour paints is probably gum arabic (by comparison with the reference materials). This identification is not conclusive, but the combination techniques of XPS and SEM shows the surface structure with material distribution of the gum binder and the other ingredients of the watercolour paints. Therefore as a unique technique, XPS combined with SEM-EDX may prove a useful method in the study of surface structure for not only watercolour objects but also other art objects; which may in future help in the conservation for art.

  1. X-ray fluorescence and computed radiography analysis of a famous brazilian painting from XIX century

    Energy Technology Data Exchange (ETDEWEB)

    Calza, Cristiane; Oliveira, Davi F.; Rocha, Henrique S.; Lopes, Ricardo Tadeu [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Lab. de Instrumentacao Nuclear], e-mail: ccalza@lin.ufrj.br; Pedreira, Andrea [Museu Nacional de Belas Artes, Rio de Janeiro, RJ (Brazil)

    2009-07-01

    This work used Energy Dispersive X-Ray Fluorescence (EDXRF) and Computed Radiography (CR) to evaluate the general conditions of the painting 'Gioventu' (Eliseu Visconti, 1898), identifying possible problems, areas that revealed signs of previous retouchings and the pigments used by the artist. EDXRF measurements were carried out with a portable system consisting of an X-ray tube Oxford TF3005 with W anode, operating at 25 kV and 100 {mu}A, and a Si-PIN XR-100CR detector from Amptek. Several spectra were obtained in each color, with an acquisition time of 300 s and a beam collimation of 2 mm. The spectra were analyzed using the software QXAS-AXIL (IAEA). The results revealed that the drawings were made over a preparatory layer of lead white. Some pigments identified were: yellow, red and brown ochre; umbra; vermilion; cobalt blue; etc. The experimental setup used in the CR analysis consisted of an Oxford X-ray source, operating at 50 kV and 200 {mu}A, placed at 85 cm from the painting, a GE CR 50P portable computed radiography scanner and a Fuji imaging plate detector. The exposure time was 600 s. The radiographic images revealed that the painting was in a good state of conservation and also a complete composition hidden underneath the visible paint layer.(author)

  2. Subjective Ratings of Beauty and Aesthetics: Correlations With Statistical Image Properties in Western Oil Paintings

    Science.gov (United States)

    Lehmann, Thomas; Redies, Christoph

    2017-01-01

    For centuries, oil paintings have been a major segment of the visual arts. The JenAesthetics data set consists of a large number of high-quality images of oil paintings of Western provenance from different art periods. With this database, we studied the relationship between objective image measures and subjective evaluations of the images, especially evaluations on aesthetics (defined as artistic value) and beauty (defined as individual liking). The objective measures represented low-level statistical image properties that have been associated with aesthetic value in previous research. Subjective rating scores on aesthetics and beauty correlated not only with each other but also with different combinations of the objective measures. Furthermore, we found that paintings from different art periods vary with regard to the objective measures, that is, they exhibit specific patterns of statistical image properties. In addition, clusters of participants preferred different combinations of these properties. In conclusion, the results of the present study provide evidence that statistical image properties vary between art periods and subject matters and, in addition, they correlate with the subjective evaluation of paintings by the participants. PMID:28694958

  3. Radiation-polymerisable paint and its applications

    International Nuclear Information System (INIS)

    Cassata, J.C.; Dickie, R.A.

    1974-01-01

    A paint polymerisable under the effect of a radiation is presented. The main components, excluding non-polymerisable solvent, pigment, initiator and particle charge, are as follows: about 90 to 10 parts of a saturated thermoplastic vinyl polymer of average molecular mass around 2000 to 250,000, prepared from monofunctional vinyl monomers to the extent of at least 85% by weight; about 10 to 90 parts of vinyl monomer solvent for the polymer, up to 90% by weight of the solvent consisting of monovinyl monomers and the remainder being chosen amongst divinyl, trivinyl, tetravinyl monomers and their mixtures. The average molecular weight of the thermoplastic vinyl polymer has between 5000 and 50,000 [fr

  4. Diuretic plants in the paintings of Pompeii.

    Science.gov (United States)

    Melillo, L

    1994-01-01

    The plants that appear in the paintings and mosaics of Pompeii are chiefly edible and medicinal, though flowers with purely esthetic appeal are also shown. An important example is one of the floor mosaics from the House of the Faun, in which it is possible to identify lemon, cherry, strawberry, pomegranate, grape and olive, leaves of grape, fig, apple and olive, and flowers of corn cockle. The diuretic properties of some of these plants are mentioned in the Naturalis Historia of Pliny the Elder. A silver cup from the House of Menandro, one of the most refined examples of plant decoration in antiquity, shows olive branches and fruits. The presence of plants in such artefacts confirms that people of classical times were conscious that plants were important producers of food, oils, fibers, woods and medicines.

  5. Paint compositions for indicating irradiation dose

    International Nuclear Information System (INIS)

    Maruyama, T.; Murata, K.

    1975-01-01

    Paint compositions for indicating irradiation dose are prepared from chlorine-combined polyester, 5 to 30 percent by weight of a reductive discoloring substance or a mixture of said substances, and/or 0.005 to 2.0 percent by weight of a reducing dyestuff or a mixture of said dyestuffs, in which said chlorine-combined polyester is obtained by a chlorinated dibasic acid or its anhydride as an acid component or a part of an acid component selected from a group consisting of 3-chlorophthalic acid, 4-chlorophthalic acid, dichlorinated phthalic acid, tetrachlorophthalic acid, 1,4,5,6,7,7-hexachlorobicyclo-(2,2,1)-5-heptene-2,3-dicarboxylic acid, 4-chloro-4-cyclohexene-1,2-dicarboxylic acid and the anhydrides corresponding to said acids. (auth)

  6. [Optic mixing of colours in Seurat's painting].

    Science.gov (United States)

    Cernea, Paul

    2002-01-01

    Georges Seurat is the initiator and master of the divisionism. He founds the neoimpressionism current that tries to reproduce the nature exclusively through coloured vibration. Seurat applies the colours in small touches uniformly distributed on the canvas; the colours merge if they are looked by a certain distance, through optical interference. When the spectator approaches from the picture, the special frequency decreases, the optical merging does not appear and the onlooker looks a lot of coloured spots. When the spectator moves away from the picture, the optical interference appears and the clarity of the image becomes perfectly. This current opened the way of the future's modern painting performed by Cézanne, Renoir, Van Gogh.

  7. Local Treatment for Monochrome Outdoor Painted Metal Sculptures: Assessing the suitability of conservation paints for retouching

    OpenAIRE

    van Basten, Nikki; Defeyt, Catherine; Rivenc, Rachel

    2015-01-01

    When outdoor painted sculptures get chipped, scratched or abraded, conservators might consider local retouching treatments as an option that would protect the exposed metal substrate and restore the aesthetic integrity, thus postponing a very costly and invasive overall repainting. Unfortunately, matching colour gloss and texture on large monochrome surfaces is always challenging. This paper reports on research undertaken to investigate some of the materials and application techniques that co...

  8. Painting recognition with smartphones equipped with inertial measurement unit

    Science.gov (United States)

    Masiero, Andrea; Guarnieri, Alberto; Pirotti, Francesco; Vettore, Antonio

    2015-06-01

    Recently, several works have been proposed in the literature to take advantage of the diffusion of smartphones to improve people experience during museum visits. The rationale is that of substituting traditional written/audio guides with interactive electronic guides usable on a mobile phone. Augmented reality systems are usually considered to make the use of such electronic guides more effective for the user. The main goal of such augmented reality system (i.e. providing the user with the information of his/her interest) is usually achieved by properly executing the following three tasks: recognizing the object of interest to the user, retrieving the most relevant information about it, properly presenting the retrieved information. This paper focuses on the first task: we consider the problem of painting recognition by means of measure- ments provided by a smartphone. We assume that the user acquires one image of the painting of interest with the standard camera of the device. This image is compared with a set of reference images of the museum objects in order to recognize the object of interest to the user. Since comparing images taken in different conditions can lead to unsatisfactory recognition results, the acquired image is typically properly transformed in order to improve the results of the recognition system: first, the system estimates the homography between properly matched features in the two images. Then, the user image is transformed accordingly to the estimated homography. Finally, it is compared with the reference one. This work proposes a novel method to exploit inertial measurement unit (IMU) measurements to improve the system performance, in particular in terms of computational load reduction: IMU measurements are exploited to reduce both the computational burden required to estimate the transformation to be applied to the user image, and the number of reference images to be compared with it.

  9. The results of the investigations on rock mechanics in HDB-9-11 boreholes and update of the rock mechanical model around the Horonobe URL construction area

    International Nuclear Information System (INIS)

    Sanada, Hiroyuki; Niunoya, Sumio; Matsui, Hiroya

    2008-09-01

    Horonobe URL (Underground Research Laboratory) Project is conducted at Horonobe-cho, Teshio-gun, Hokkaido. This research report shows the result of the rock mechanical investigations which have been carried out from 2004 to 2005 as a part of the project. The objectives of the rock mechanical investigation are as follows: To obtain the data which were necessary for construction design of URL. To confirm the distribution of rock mechanical properties in and around URL construction area. The results of the investigations are summarized as follows: 1) Variation and values of depth direction of physical and mechanical properties in the laboratory construction area corresponded approximately to the results obtained from the rock mechanical investigations of HDB-1-8. 2) The major redesign had been not had about physical and mechanical properties in the laboratory construction area being able to divide into three zones and length of its own zone in updating rock mechanical model. 3) From the results of initial stress measured by hydraulic fracturing, the results that the direction of the maximum principle stress is E-W was no different from results obtained from the investigations of HDB-1-8, but the magnitude correlation among maximum, minimum principle stress and overburden pressure measured around G.L.-927 m showed different trends compared with the results of HDB-1-8. 4) Diatomaceous mudstone was yielded under isotropic compression. Cam-clay model as constitutive law of diatomaceous mudstone should be used for tunnel excavation analysis. 5) Uniaxial compression strength of rock saturated under saline water is larger than that of saturated under freshwater. Poisson's ratio of rock saturated under saline water is smaller than that of saturated under saline water. 6) The effective confining pressure increases with the equivalent opening width and permeability decreases. 7) The value of principle stress obtained from DSCA method is larger than that obtained from hydraulic

  10. XRF measurements of tin, copper and zinc in antifouling paints coated on leisure boats

    International Nuclear Information System (INIS)

    Ytreberg, Erik; Bighiu, Maria Alexandra; Lundgren, Lennart; Eklund, Britta

    2016-01-01

    Tributyltin (TBT) and other organotin compounds have been restricted for use on leisure boats since 1989 in the EU. Nonetheless, release of TBT is observed from leisure boats during hull maintenance work, such as pressure hosing. In this work, we used a handheld X-ray Fluorescence analyser (XRF) calibrated for antifouling paint matrixes to measure tin, copper and zinc in antifouling paints coated on leisure boats in Sweden. Our results show that over 10% of the leisure boats (n = 686) contain >400 μg/cm 2 of tin in their antifouling coatings. For comparison, one layer (40 μm dry film) of a TBT-paint equals ≈ 800 μg Sn/cm 2 . To our knowledge, tin has never been used in other forms than organotin (OT) in antifouling paints. Thus, even though the XRF analysis does not provide any information on the speciation of tin, the high concentrations indicate that these leisure boats still have OT coatings present on their hull. On several leisure boats we performed additional XRF measurements by progressively scraping off the top coatings and analysing each underlying layer. The XRF data show that when tin is detected, it is most likely present in coatings close to the hull with several layers of other coatings on top. Thus, leaching of OT compounds from the hull into the water is presumed to be negligible. The risk for environmental impacts arises during maintenance work such as scraping, blasting and high pressure hosing activities. The data also show that many boat owners apply excessive paint layers when following paint manufacturers recommendations. Moreover, high loads of copper were detected even on boats sailing in freshwater, despite the more than 20 year old ban, which poses an environmental risk that has not been addressed until now. - Highlights: • A new XRF application for analysing metals in antifouling paints has been used. • Almost 700 leisure boats were analysed for tin, copper and zinc. • Over 10% of the leisure boats contained high, >400

  11. Special duties of paints in nuclear environment in India with examples of application

    International Nuclear Information System (INIS)

    Singha Roy, P.K.; Subbaratnam, T.

    1978-01-01

    Any process involving nuclear interactions gives rise to radioactivity and radiation in various degrees apart from conventional effects like heat, pressure, etc. Vessels and structures containing such processes are subject to various degrees of radioactivity and contamination by liquid, gaseous or particulate radioactive materials coming in contact with the substrate. Thus, in any nuclear environment surfaces require protection against both radioactive contamination and normal corrosion forces. The protective coating should be able to resist the radiation field in which it is placed and also withstand decontamination process for removal of radioactive contamination from the surface as and when required. Radioactive contamination due to any radiochemical operation is objectionable for two reasons: (i) it constitutes a potential radiation hazard to occupants of the facility, and (ii) cross contamination jeoparadizes the validity of the experimental data. The difficulty experienced in decontaminating many materials used in construction of such nuclear or radiochemical facilities has therefore given emphasis to the search for suitable coating matetials. This paper deals with the two special duties expected of paints in such environment, viz., radiation resistance and decontaminability tests in this regard in BARC and examples of actual selections and applications in an Indian nuclear power station. Some areas requiring investigations and serious attention for industrial painting in general and nuclear painting work in particular have been also identified. (author)

  12. TA3 - Dosimetry and instrumentation supply of the M-Fish technique to the Fish-3 painting technique for analysing translocations: A radiotherapy-treated patient study

    International Nuclear Information System (INIS)

    Pouzoulet, F.; Roch-Lefevre, S.; Giraudet, A.L.; Vaurijoux, A.; Voisin, P.A.; Buard, V.; Delbos, M.; Voisin, Ph.; Roy, L.; Bourhis, J.

    2006-01-01

    Purpose: Currently, the chromosome translocation study is the best method to estimate the dose of an old radiation exposure. Fluorescent In Situ Hybridization (F.I.S.H.) technique allows an easy detection of this kind of aberrations. However, as only a few number of chromosomes is usually painted, some bias could skew the result. To evaluate the advantage of using full genome staining (M-F.I.S.H. technique) compared with three chromosomes labelling (F.I.S.H.-3 painting), we compared translocation yields in radiotherapy treated patients. Methods: Chromosome aberration analyses were performed on peripheral blood lymphocyte cultures of two patients treated for a throat cancer by radiotherapy. Blood samples were obtained, before, along the treatment and six or four months later. For each sample, a dicentrics analysis was performed together with translocation analysis either with F.I.S.H.-3 painting or M-F.I.S.H.. Results: By confronting results from the F.I.S.H.-3 painting technique and the M-F.I.S.H. technique, significant differences were revealed. The translocations yield seemed to be stable with the F.I.S.H.-3 painting technique whereas it is not the case with the M-F.I.S.H. technique. This difference in results was explained by the bias induced by F.I.S.H.-3 Painting technique in the visualisation of complex aberrations. Furthermore, we found the presence of a clone bearing a translocation involving a painted chromosome. Conclusions: According to the potential bias of F.I.S.H.-3 painting on translocations study, the M-F.I.S.H. technique should provide more precise and reproducible results. Because of its more difficult implement, it seems hardly applicable to retrospective dosimetry instead of F.I.S.H.-3 painting technique. (authors)

  13. TA3 - Dosimetry and instrumentation supply of the M-Fish technique to the Fish-3 painting technique for analysing translocations: A radiotherapy-treated patient study

    Energy Technology Data Exchange (ETDEWEB)

    Pouzoulet, F.; Roch-Lefevre, S.; Giraudet, A.L.; Vaurijoux, A.; Voisin, P.A.; Buard, V.; Delbos, M.; Voisin, Ph.; Roy, L. [Institut de Radioprotection et de Surete Nucleaire, Lab. de Dosimetrie Biologique, 92 - Fontenay aux Roses (France); Bourhis, J. [Laboratoire UPRES EA 27-10, Radiosensibilite des Tumeurs et Tissus sains, PR1, 94 - Villejuif (France)

    2006-07-01

    Purpose: Currently, the chromosome translocation study is the best method to estimate the dose of an old radiation exposure. Fluorescent In Situ Hybridization (F.I.S.H.) technique allows an easy detection of this kind of aberrations. However, as only a few number of chromosomes is usually painted, some bias could skew the result. To evaluate the advantage of using full genome staining (M-F.I.S.H. technique) compared with three chromosomes labelling (F.I.S.H.-3 painting), we compared translocation yields in radiotherapy treated patients. Methods: Chromosome aberration analyses were performed on peripheral blood lymphocyte cultures of two patients treated for a throat cancer by radiotherapy. Blood samples were obtained, before, along the treatment and six or four months later. For each sample, a dicentrics analysis was performed together with translocation analysis either with F.I.S.H.-3 painting or M-F.I.S.H.. Results: By confronting results from the F.I.S.H.-3 painting technique and the M-F.I.S.H. technique, significant differences were revealed. The translocations yield seemed to be stable with the F.I.S.H.-3 painting technique whereas it is not the case with the M-F.I.S.H. technique. This difference in results was explained by the bias induced by F.I.S.H.-3 Painting technique in the visualisation of complex aberrations. Furthermore, we found the presence of a clone bearing a translocation involving a painted chromosome. Conclusions: According to the potential bias of F.I.S.H.-3 painting on translocations study, the M-F.I.S.H. technique should provide more precise and reproducible results. Because of its more difficult implement, it seems hardly applicable to retrospective dosimetry instead of F.I.S.H.-3 painting technique. (authors)

  14. Assessing the efficiency of an unplanted horizontal flow constructed wetland to reduce some emerging organic micropollutants. Preliminary results

    Science.gov (United States)

    Tapias, Josefina C.; Vila, Marta; Himi, Mahjoub; Salvadó, Victoria; Casas, Albert; Hidalgo, Manuela

    2017-04-01

    The presence of emerging organic contaminants (EOC) such as pharmaceutical and personal care products, pesticides or antiseptics in wastewater is an increasing concern worldwide due to their potential toxicological effects for humans and other living organisms. Because of their low concentration and persistence their removal using conventional treatment technologies is often incomplete and for this reason there is a growing interest for assessing the efficiency of alternative wastewater treatment technologies such as constructed wetlands (CWs). CWs are engineered systems for wastewater treatment plant (WWTP) designed to take advantage of many of the same processes that occur in natural wetlands, but within a more controlled environment. CWs are a cost-effective alternative to conventional wastewater treatment plants especially in the context of small communities with less than 2000 people equivalent. Our study has been conducted at the Verdú WWTP (Lleida, Catalonia, NE Spain). This system has a primary treatment consisting on three septic tanks in parallel with a volume of 50 m3 and three chambers each one. The primary effluent is distributed to four parallel horizontal subsurface flow (HSSF) CWs. Originally the system was planted with common reed (Phragmites australis), but currently after twelve years of service the system show evidences of clogging and then gravel bed was replaced and plants removed. After the HSSF CWs, there are two wastewater stabilization ponds (WSPs) followed by two smaller polishing horizontal HSSF CWs. Excellent overall treatment performance was exhibited on the elimination of conventional water quality parameters (93-98% average removal efficiency for TSS, COD, BOD5 and NTK), and its final effluent proved to comply with existing Spanish guidelines. Sampling has been conducted along two years at different seasons and examined EOC substances included analgesic and anti-inflammatory drugs (ibuprofen, diclofenac, and naproxene

  15. Localization of proteins in paint cross-sections by scanning electrochemical microscopy as an alternative immunochemical detection technique

    Energy Technology Data Exchange (ETDEWEB)

    Sciutto, Giorgia; Prati, Silvia [Microchemistry and Microscopy Art Diagnostic Laboratory, University of Bologna, Via Guaccimanni 42, Ravenna 48121 (Italy); Department of Chemistry “G. Ciamician”, University of Bologna, Via Selmi, Bologna 2 40126 (Italy); Mazzeo, Rocco, E-mail: rocco.mazzeo@unibo.it [Microchemistry and Microscopy Art Diagnostic Laboratory, University of Bologna, Via Guaccimanni 42, Ravenna 48121 (Italy); Department of Chemistry “G. Ciamician”, University of Bologna, Via Selmi, Bologna 2 40126 (Italy); Zangheri, Martina; Roda, Aldo; Bardini, Luca; Valenti, Giovanni; Rapino, Stefania [Department of Chemistry “G. Ciamician”, University of Bologna, Via Selmi, Bologna 2 40126 (Italy); Marcaccio, Massimo, E-mail: massimo.marcaccio@unibo.it [Department of Chemistry “G. Ciamician”, University of Bologna, Via Selmi, Bologna 2 40126 (Italy)

    2014-06-01

    Highlights: • Advanced immuno-electrochemical detection of proteins in paint samples by SECM. • Analysis performed directly on cross-section with high spatial resolution. • Identification of HRP catalytic activity for a selective location of analyte. • Satisfactory results were obtained for aged real samples. • The way forward for an extensive application of SECM in conservation science is shown. - Abstract: The qualitative identification of proteinaceous substances, as well as their location within a complex paint stratigraphy, is one of the most challenging issues in the characterization of painting materials. Nevertheless, information on paint components represent a crucial task for studies concerning both the ancient painting techniques adopted and the state of conservation, being fundamental investigations for the selection of appropriate conservation actions. The present research was aimed at developing a new detection approach for the immunochemical localization of ovalbumin in paint cross-sections based on the use of scanning electrochemical microscopy (SECM). The immunochemical analyses were performed using an anti-ovalbumin primary antibody and a secondary antibody labelled with horseradish peroxidase (HRP). SECM measurements were performed in feedback mode using benzoquinone (BQ)/hydroquinone (H{sub 2}Q) redox couple. In presence of hydrogen peroxide (H{sub 2}O{sub 2}), HRP catalyzes the re-oxidation of H{sub 2}Q to BQ and the increment of BQ concentration in correspondence of the target protein was detected by SECM through the electrochemical reduction of the regenerated BQ at the microelectrode. Indeed, the localization of ovalbumin was possible thanks to a clear discrimination of SECM currents, achieved by the comparison of the measurements recorded before and after H{sub 2}O{sub 2} administration, based on the HRP on/off approach. The method was evaluated both on samples from standard mocks-up and on a historical sample, collected from a

  16. A comparative study of art therapy in cancer patients receiving chemotherapy and improvement in quality of life by watercolor painting.

    Science.gov (United States)

    Bozcuk, H; Ozcan, K; Erdogan, C; Mutlu, H; Demir, M; Coskun, S

    2017-02-01

    There is limited data on the role of art therapy used in cancer patients. We wanted to test the effect of painting art therapy provided by a dedicated professional painting artist on quality of life and anxiety and depression levels in patients having chemotherapy. Cancer patients having chemotherapy in the day unit of a medical oncology department of a university hospital were offered to take part in a painting art therapy program (PATP). This program consisted of a professional painting artist facilitating and helping patients to perform painting during their chemotherapy sessions while they were in the day unit, as well as supplying them painting material for home practice. The changes in quality of life domains of EORTC-QLQ-C30 questionnaire and in Hospital Anxiety and Depression Scores (HADS) were assessed before and after the PATP. These results were contrasted with a reference group of cancer patients on chemotherapy but not taking part in the PATP. In order to adjust for multiple comparisons of quality of life parameters between patient groups, we utilized the Bonferroni correction. A total of 48 patients, of which 26 patients did and 22 did not have prior exposure to PATP, were enrolled in the PATP. A control group of 24 patients who did not have any PATP activity during the study period also took part in the study. With PATP, there was significant improvement in global quality of life (F=7.87, P=0.001), and depression scores (F=7.80, P=0.001). To our knowledge, this is the largest comparative PATP experience in cancer patients on chemotherapy and show that PATP is feasible in the clinics. Our results confirm that art therapy in the form of painting improves quality of life and depression in cancer patients having chemotherapy. This effect was more pronounced in patients without any previous experience of PATP. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Exposure Characteristics of Construction Painters to Organic Solvents

    Directory of Open Access Journals (Sweden)

    Hyunhee Park

    2016-03-01

    Conclusion: From this study, we recognized that construction painters are exposed to various solvents, including carcinogens and reproductive toxins, and the levels of TVOC concentration in many of the painting tasks exceeded the exposure limits. Construction workers need to be protected from chemical agents during their painting works by using personal protective devices and/or work practice measures. Additional studies should focus on the exposure assessment of other hazards for construction workers, in order to identify high-risk tasks and to improve hazardous work environments.

  18. Reassessing the extent of the Q classification for containment paint

    International Nuclear Information System (INIS)

    Spires, G.

    1995-01-01

    A mounting number of site-specific paint debris transport and screen clogging analyses submitted to justify substandard containment paint work have been deemed persuasive by virtue of favorable U.S. Nuclear Regulatory Commission safety evaluation report (SER) findings. These lay a strong foundation for a standardized approach to redefining the extent to which paint in containment needs to be considered open-quotes Q.close quotes This information justifies an initiative by licensees to roll back paint work quality commitments made at the design phase. This paper questions the validity of the basic premise that all primary containment paint can significantly compromise core and containment cooling [emergency core cooling system/engineered safeguard feature (ECCS/ESF)]. It is posited that the physical extent of painted containment surfaces for which extant material qualification and quality control (QC) structures need apply can be limited to zones relatively proximate to ECCS/ESF suction points. For other painted containment surfaces, simplified criteria should be allowed

  19. results

    Directory of Open Access Journals (Sweden)

    Salabura Piotr

    2017-01-01

    Full Text Available HADES experiment at GSI is the only high precision experiment probing nuclear matter in the beam energy range of a few AGeV. Pion, proton and ion beams are used to study rare dielectron and strangeness probes to diagnose properties of strongly interacting matter in this energy regime. Selected results from p + A and A + A collisions are presented and discussed.

  20. Development of multi-functional nano-paint for energy harvesting applications

    Directory of Open Access Journals (Sweden)

    Bir B. Bohara

    2018-02-01

    Full Text Available The multi-functionality of lead magnesium niobate-lead titanate/paint (PMN-PT/paint nanocomposite films for energy harvesting via piezoelectric and pyroelectric effects is described. PMN-PT/paint films have been fabricated by a conventional paint-brushing technique to provide a low-cost, low-temperature and low–energy route to create multi-functional films. The properties investigated included dielectric constants, ε' and ε'', as a function of temperature, frequency and composition. From these parameters, it is indicated that the dielectric constants and AC conductivity (σAC increase with an increase of filler content and temperature, implying an improvement of the functionality of the films. The results revealed that σAC obeyed the relation σAC = Aωs, and exponent s, was found to decrease by increasing the temperature. The correlated barrier hopping was the dominant conduction mechanism in the nanocomposite films. The efforts were made to investigate the performance of nanocomposite films to mechanical vibrations and thermal variations. A cantilever system was designed and examined to assess its performance as energy harvesters. The highest output voltage and power for a PMN-PT/paint based harvester with a broad frequency response operating in the -31-piezoelectric mode were 65 mV and 1 nW, respectively. Voltage and power were shown to be enhanced by application of thermal variations. Thus, films could be utilized for combined energy harvesting via piezoelectric and pyroelectric characteristics. Keywords: Dielectric, Pyroelectricity, Piezoelectricity, Nanocomposites, PMN-PT, Energy harvesting

  1. A novel XRF method to measure environmental release of copper and zinc from antifouling paints.

    Science.gov (United States)

    Ytreberg, Erik; Lagerström, Maria; Holmqvist, Albin; Eklund, Britta; Elwing, Hans; Dahlström, Magnus; Dahl, Peter; Dahlström, Mia

    2017-06-01

    The release of copper (Cu) and zinc (Zn) from vessels and leisure crafts coated with antifouling paints can pose a threat to water quality in semi-enclosed areas such as harbors and marinas as well as to coastal archipelagos. However, no reliable, practical and low-cost method exists to measure the direct release of metals from antifouling paints. Therefore, the paint industry and regulatory authorities are obliged to use release rate measurements derived from either mathematical models or from laboratory studies. To bridge this gap, we have developed a novel method using a handheld X-Ray Fluorescence spectrometer (XRF) to determine the cumulative release of Cu and Zn from antifouling paints. The results showed a strong linear relationship between XRF K α net intensities and metal concentrations, as determined by ICP-MS. The release of Cu and Zn were determined for coated panels exposed in harbors located in the Baltic Sea and in Kattegat. The field study showed salinity to have a strong impact on the release of Cu, i.e. the release increased with salinity. Contrary, the effect of salinity on Zn was not as evident. As exemplified in this work, the XRF method also makes it possible to identify the governing parameters to the release of Cu and Zn, e.g. salinity and type of paint formulation. Thus, the XRF method can be used to measure environmentally relevant releases of metallic compounds to design more efficient and optimized antifouling coatings. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  2. The application and processing of paints hardened by electron beams

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    Electron beam hardening is a process for changing liquid surface coatings of different thicknesses by irradiation with electrons of high energy into solid, hard, elastic films. In contrast to the UV process, one can harden pigmented paints with electron beams. An electron accelerator, which remits free electrons is used as the energy source for starting the chemical reaction in the coating material. In order to irradiate flat parts, which were coated with liquid paint by rolling, pouring or spraying, equally with electrons, one must produce an 'electron curtain', similar to that in a paint pouring machine. (orig./PW) [de

  3. Recognition and inference of crevice processing on digitized paintings

    Science.gov (United States)

    Karuppiah, S. P.; Srivatsa, S. K.

    2013-03-01

    This paper is designed to detect and removal of cracks on digitized paintings. The cracks are detected by threshold. Afterwards, the thin dark brush strokes which have been misidentified as cracks are removed using Median radial basis function neural network on hue and saturation data, Semi-automatic procedure based on region growing. Finally, crack is filled using wiener filter. The paper is well designed in such a way that most of the cracks on digitized paintings have identified and removed. The paper % of betterment is 90%. This paper helps us to perform not only on digitized paintings but also the medical images and bmp images. This paper is implemented by Mat Lab.

  4. Photonic Paint Developed with Metallic Three-Dimensional Photonic Crystals

    Science.gov (United States)

    Sun, Po; Williams, John D.

    2012-01-01

    This work details the design and simulation of an inconspicuous photonic paint that can be applied onto an object for anticounterfeit and tag, track, and locate (TTL) applications. The paint consists of three-dimensional metallic tilted woodpile photonic crystals embedded into a visible and infrared transparent polymer film, which can be applied to almost any surface. The tilted woodpile photonic crystals are designed with a specific pass band detectable at nearly all incident angles of light. When painted onto a surface, these crystals provide a unique reflective infra-red optical signature that can be easily observed and recorded to verify the location or contents of a package.

  5. Criteria and results from the analysis of the problem of site selection for the construction of high level RAW repository

    International Nuclear Information System (INIS)

    Evstatiev, D.; Kozhoukharova, D.; Iliev, I.; Karagyuleva, J.

    1993-02-01

    The criteria for preliminary assessment of the Bulgarian territory and the results of the selection of prospective sites for future investigation concerning the choice of the suitable places for RAW repositories are presented. The selection of the prospective terrains has been performed in two stages: 1) Categorization of the country according to the prospective conditions for suitable sites and 2) Distinguishing and preliminary assessment of the suitable sites. The number of these sites was reduced to 20 by the method of successive screening. They are located in Northwest and Southeast Bulgaria and are built of marls, clays, granite, gneiss, serpentine and and volcanic rocks. The selected 20 sites has been subjected to preliminary investigation according to a programme specially worked out for the purpose. The investigation covers the analysis and summing up of the available geographical, geomorphological, geological, seismotectonic, hydrological, climatic, hydrogeological and geotechnical data, as well as a minimum of additional field research and laboratory tests. The results of the investigation of each site are presented and discussed. 1 ref

  6. I-90 Snowqualmie Pass to Vantage : traveling through 2016 construction on I-90.

    Science.gov (United States)

    2016-03-01

    Its going to be another busy construction season on I-90. Crews are improving the : highway in several different locations between Snoqualmie Pass and Vantage. Crews are : building, repairing and painting bridges, adding lanes, repaving deteriorat...

  7. Hyperspectral remote sensing techniques applied to the noninvasive investigation of mural paintings: a feasibility study carried out on a wall painting by Beato Angelico in Florence

    Science.gov (United States)

    Cucci, Costanza; Picollo, Marcello; Chiarantini, Leandro; Sereni, Barbara

    2015-06-01

    Nowadays hyperspectral imaging is a well-established methodology for the non-invasive diagnostics of polychrome surfaces, and is increasingly utilized in museums and conservation laboratories for documentation purposes and in support of restoration procedures. However, so far the applications of hyperspectral imaging have been mainly limited to easel paintings or paper-based artifacts. Indeed, specifically designed hyperspectral imagers, are usually used for applications in museum context. These devices work at short-distances from the targets and cover limited size surfaces. Instead, almost still unexplored remain the applications of hyperspectral imaging to the investigations of frescoes and large size mural paintings. For this type of artworks a remote sensing approach, based on sensors capable of acquiring hyperspectral data from distances of the order of tens of meters, is needed. This paper illustrates an application of hyperspectral remote sensing to an important wall-painting by Beato Angelico, located in the San Marco Museum in Florence. Measurements were carried out using a re-adapted version of the Galileo Avionica Multisensor Hyperspectral System (SIM-GA), an avionic hyperspectral imager originally designed for applications from mobile platforms. This system operates in the 400-2500 nm range with over 700 channels, thus guaranteeing acquisition of high resolution hyperspectral data exploitable for materials identification and mapping. In the present application, the SIM-GA device was mounted on a static scanning platform for ground-based applications. The preliminary results obtained on the Angelico's wall-painting are discussed, with highlights on the main technical issues addressed to optimize the SIM-GA system for new applications on cultural assets.

  8. Lime-based restoration paints: characterization and evaluation of formulations using a native species from the Amazon flora and PVA-based glue as additives

    Directory of Open Access Journals (Sweden)

    Mayra Martins Silva

    Full Text Available Abstract Based on historic documents, two lime-based paint formulations were produced in laboratory in order to evaluate their basic characteristics as restoration materials for historic buildings with lime-based components. The paints were made basically with hydrated lime, clay, water and linseed (Linum usitatissimum L. oil, and one formulation had PVA (polyvinyl acetate-based glue as fixative, and the other one, Couma guianensis' latex. Each paint component was characterized by XRD and FTIR, and color and specular gloss measurements were performed on both paints. A preliminary assessment of the paints was conducted using the Pipe Method, the salt crystallization test, visual analysis for dustiness, and analysis of microbiological growth. The results showed that the laboratory-produced paints are theoretically and technologically compatible with lime-based coatings, however, their superficial performance can be improved to achieve greater durability. This study also brings to light local materials from the Amazon region that have great potential to be used and recognized as raw materials for paints and which could also be investigated for other uses.

  9. Neural plasticity in amplitude of low frequency fluctuation, cortical hub construction, regional homogeneity resulting from working memory training.

    Science.gov (United States)

    Takeuchi, Hikaru; Taki, Yasuyuki; Nouchi, Rui; Sekiguchi, Atsushi; Kotozaki, Yuka; Nakagawa, Seishu; Makoto Miyauchi, Carlos; Sassa, Yuko; Kawashima, Ryuta

    2017-05-03

    Working memory training (WMT) induces changes in cognitive function and various neurological systems. Here, we investigated changes in recently developed resting state functional magnetic resonance imaging measures of global information processing [degree of the cortical hub, which may have a central role in information integration in the brain, degree centrality (DC)], the magnitude of intrinsic brain activity [fractional amplitude of low frequency fluctuation (fALFF)], and local connectivity (regional homogeneity) in young adults, who either underwent WMT or received no intervention for 4 weeks. Compared with no intervention, WMT increased DC in the anatomical cluster, including anterior cingulate cortex (ACC), to the medial prefrontal cortex (mPFC). Furthermore, WMT increased fALFF in the anatomical cluster including the right dorsolateral prefrontal cortex (DLPFC), frontopolar area and mPFC. WMT increased regional homogeneity in the anatomical cluster that spread from the precuneus to posterior cingulate cortex and posterior parietal cortex. These results suggest WMT-induced plasticity in spontaneous brain activity and global and local information processing in areas of the major networks of the brain during rest.

  10. Effects of Tactile Sensations during Finger Painting on Mindfulness, Emotions, and Scope of Attention

    Science.gov (United States)

    Stanko-Kaczmarek, Maja; Kaczmarek, Lukasz D.

    2016-01-01

    Research has shown that creative performance, such as painting, influences affective and cognitive processes. Yet little is known about how tactile sensations experienced during painting determine what individuals feel and how they think while they create. Based on prior research, finger painting (compared to brush painting) was expected to…

  11. Construction history and construction management

    International Nuclear Information System (INIS)

    Agh, S.

    1999-01-01

    The process of pre-design and design preparation of the Mochovce NPP as well as the construction history of the plant is highlighted, including the financing aspect and problems arising from changes in the technological and other conditions of start-up of the reactor units. The results of international audits performed to improve the level of nuclear safety and implementation of the measures suggested are also described. The milestones of the whole construction process and start-up process, the control and quality system, and the methods of control and management of the complex construction project are outlined. (author)

  12. Constructing "Authentic" Science: Results from a University/High School Collaboration Integrating Digital Storytelling and Social Networking

    Science.gov (United States)

    Olitsky, Stacy; Becker, Elizabeth A.; Jayo, Ignacio; Vinogradov, Philip; Montcalmo, Joseph

    2018-02-01

    This study explores the implications of a redesign of a college course that entailed a new partnership between a college neuroscience classroom and a high school. In this course, the college students engaged in original research projects which included conducting brain surgery and behavioural tests on rats. They used digital storytelling and social networking to communicate with high school students and were visited by the students during the semester. The aims of the redesign were to align the course with science conducted in the field and to provide opportunities to disseminate scientific knowledge through emerging technologies. This study investigates the impact of these innovations on the college and high school students' perceptions of authentic science, including their relationship with science-centred communities. We found that these collaborative tools increased college students' perceptions that authentic science entailed communication with the general public, in addition to supporting prior perceptions of the importance of conducting experiments and presenting results to experts. In addition, the view of science as high-status knowledge was attenuated as students integrated non-formal communication practices into presentations, showing the backstage process of learning, incorporating music and youth discourse styles, and displaying emotional engagement. An impact of these hybrid presentation approaches was an increase in the high school students' perceptions of the accessibility of laboratory science. We discuss how the use of technologies that are familiar to youth, such as iPads, social networking sites, and multimedia presentations, has the potential to prioritize students' voices and promote a more inclusive view of science.

  13. Constructing a Cross-Domain Resource Inventory: Key Components and Results of the EarthCube CINERGI Project.

    Science.gov (United States)

    Zaslavsky, I.; Richard, S. M.; Malik, T.; Hsu, L.; Gupta, A.; Grethe, J. S.; Valentine, D. W., Jr.; Lehnert, K. A.; Bermudez, L. E.; Ozyurt, I. B.; Whitenack, T.; Schachne, A.; Giliarini, A.

    2015-12-01

    While many geoscience-related repositories and data discovery portals exist, finding information about available resources remains a pervasive problem, especially when searching across multiple domains and catalogs. Inconsistent and incomplete metadata descriptions, disparate access protocols and semantic differences across domains, and troves of unstructured or poorly structured information which is hard to discover and use are major hindrances toward discovery, while metadata compilation and curation remain manual and time-consuming. We report on methodology, main results and lessons learned from an ongoing effort to develop a geoscience-wide catalog of information resources, with consistent metadata descriptions, traceable provenance, and automated metadata enhancement. Developing such a catalog is the central goal of CINERGI (Community Inventory of EarthCube Resources for Geoscience Interoperability), an EarthCube building block project (earthcube.org/group/cinergi). The key novel technical contributions of the projects include: a) development of a metadata enhancement pipeline and a set of document enhancers to automatically improve various aspects of metadata descriptions, including keyword assignment and definition of spatial extents; b) Community Resource Viewers: online applications for crowdsourcing community resource registry development, curation and search, and channeling metadata to the unified CINERGI inventory, c) metadata provenance, validation and annotation services, d) user interfaces for advanced resource discovery; and e) geoscience-wide ontology and machine learning to support automated semantic tagging and faceted search across domains. We demonstrate these CINERGI components in three types of user scenarios: (1) improving existing metadata descriptions maintained by government and academic data facilities, (2) supporting work of several EarthCube Research Coordination Network projects in assembling information resources for their domains

  14. Characterization of paint layers and stained glasses

    International Nuclear Information System (INIS)

    Biagi Maino, D.; Ciancabilla, L.; Gandolfi, G.; Maino, G.; Bruni, S.; Ferriani, S.; Visparelli, D.

    2000-01-01

    Due to the higher magnification with respect to traditional optical microscopes, the scanning electron microscopy (SEM) has been extensively applied in recent years to the investigation of elemental composition of many different types of artistic objects. The back-scattered and secondary electrons produced when the SEM electron beam hits the sample can be detected and converted in electronic signals which give rise to images of the scanned area. These images can be recorded in digital format and stored on a computer for subsequent processing. Moreover, in addition to the back-scattered and secondary electrons, the impact of the electron beam on the sample produces a X-ray spectrum, which can be further processed and analysed using an X-ray spectrometer coupled to the SEM. Therefore, it is possible to yield the chemical composition of the sample, analogously to the X-ray fluorescence analysis. Moreover, the transmission electron microscopy (TEM) can be applied to the characterization of paint layers, making ultra-thin sections in which the paint and ground layers are preserved intact. In comparison with usual SEM measurements, the TEM technique is more precise, because of the higher spatial resolution in both the microanalysis and diffraction modes, of the order of 10-20 nm. This precision allows unique identification of each component in the layer and determination of the crystallographic structure, thus characterizing even the smallest particles of each pigment and pointing out minor components. It is then possible to establish whether a pigment is natural, manufactured, its origin as well as approximate datations. In this work, we describe the research activities performed in the laboratory recently established at the ENEA (Italian National Agency for New Technology, Energy and Environment) Applied Physics Division, where dedicated SEM and TEM are connected by a suitable imaging system to a powerful computing system for image acquisition and processing. Use has

  15. [Tribological assessment of articular cartilage. A system for the analysis of the friction coefficient of cartilage, regenerates and tissue engineering constructs; initial results].

    Science.gov (United States)

    Schwarz, M L R; Schneider-Wald, B; Krase, A; Richter, W; Reisig, G; Kreinest, M; Heute, S; Pott, P P; Brade, J; Schütte, A

    2012-10-01

    Values for the friction coefficient of articular cartilage are given in ranges of percentage and lower and are calculated as a quotient of the friction force and the perpendicular loading force acting on it. Thus, a sophisticated system has to be provided for analysing the friction coefficient under different conditions in particular when cartilage should be coupled as friction partner. It is possible to deep-freeze articular cartilage before measuring the friction coefficient as the procedure has no influence on the results. The presented tribological system was able to distinguish between altered and native cartilage. Furthermore, tissue engineered constructs for cartilage repair were differentiated from native cartilage probes by their friction coefficient. In conclusion a tribological equipment is presented to analyze the friction coefficient of articular cartilage, in vivo generated cartilage regenerates and in vitro tissue engineered constructs regarding their biomechanical properties for quality assessment.

  16. A unique application of the instream flow incremental methodology (IFIM) to predict impacts on riverine aquatic habitat, resulting from construction of a proposed hydropower reservoir

    International Nuclear Information System (INIS)

    Foote, P.S.

    1999-01-01

    The City of Harrisburg, Pennsylvania, proposed to construct a new low-head hydroelectric project on the Susquehanna River in the central part of the state in 1986, about 108 km upstream of the river mouth. As part of the licensing process, the city was required by the Federal Energy Regulatory Commission to carry out studies that would forecast the impacts on riverine aquatic habitat as a result of construction of the proposed 13 km long by 1.5 km wide reservoir. The methodology selected by the city and its consultants was to use the IFIM to model the habitat conditions in the project reach both before and after construction of the proposed reservoir.The IFIM is usually used to model instream flow releases downstream of dams and diversions, and had not been used before to model habitat conditions within the proposed reservoir area. The study team hydraulically modelled the project reach using existing hydraulic data, and a HEC-2 backwater analysis to determine post-project water surface elevations. The IFG-4 model was used to simulate both pre- and post-project water velocities, by distributing velocities across transects based on known discharges and cell depth. Effects on aquatic habitat were determined using the IFIM PHABSIM program, in which criteria for several evaluation species and life stages were used to yield estimates of Weighted Usable Area. The analysis showed, based on trends in WUA from pre- and post-project conditions, that habitat conditions would improve for several species and life stages, and would be negatively affected for fewer life stages and species. Some agency concerns that construction of the proposed reservoir would have significant adverse effects on the resident and anadromous fish populations were responded to using these results

  17. Aerial vehicle with paint for detection of radiological and chemical warfare agents

    Science.gov (United States)

    Farmer, Joseph C.; Brunk, James L.; Day, S. Daniel

    2013-04-02

    A paint that warns of radiological or chemical substances comprising a paint operatively connected to the surface, an indicator material carried by the paint that provides an indication of the radiological or chemical substances, and a thermo-activation material carried by the paint. In one embodiment, a method of warning of radiological or chemical substances comprising the steps of painting a surface with an indicator material, and monitoring the surface for indications of the radiological or chemical substances. In another embodiment, a paint is operatively connected to a vehicle and an indicator material is carried by the paint that provides an indication of the radiological or chemical substances.

  18. Manganese and Iron Catalysts in Alkyd Paints and Coatings

    Directory of Open Access Journals (Sweden)

    Ronald Hage

    2016-04-01

    Full Text Available Many paint, ink and coating formulations contain alkyd-based resins which cure via autoxidation mechanisms. Whilst cobalt-soaps have been used for many decades, there is a continuing and accelerating desire by paint companies to develop alternatives for the cobalt soaps, due to likely classification as carcinogens under the REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals legislation. Alternative driers, for example manganese and iron soaps, have been applied for this purpose. However, relatively poor curing capabilities make it necessary to increase the level of metal salts to such a level that often coloring of the paint formulation occurs. More recent developments include the application of manganese and iron complexes with a variety of organic ligands. This review will discuss the chemistry of alkyd resin curing, the applications and reactions of cobalt-soaps as curing agents, and, subsequently, the paint drying aspects and mechanisms of (model alkyd curing using manganese and iron catalysts.

  19. Opportunities application of cleaner production practices in paint industry

    International Nuclear Information System (INIS)

    Mohammed, Y. S. Y.

    2010-08-01

    There are releases of volatile organic compounds VOC from paint manufacturing process steps and from cleaning operations in El Mohandas Paint Factory. These emission can cause health, safety and productivity problems in the work area. Hence cleaner production application is necessary in this case. Some of the manufacturing processes and equipment used to accomplish these manufacturing are analyzed and generate cleaner production opportunities, implement some of cleaner production solutions of VOC emission control by some of the methods used by paint facilities in reducing emissions. It was found that there is no control available for emissions factors in paints manufacturing process, so that VOC emission based on raw material consumption rather than calculation emission from processes or equipment by alternative method. (Author)

  20. PORTRAIT ART IN NATIONAL PAINTING (1959-1970

    Directory of Open Access Journals (Sweden)

    LOZOVANU VLADIMIR

    2016-12-01

    Full Text Available The author of this article describes the portrait in national painting during the 1960s, years that marked political, social and cultural changes that contributed to the spiritual emancipation of the creative personality and the formation of new plastic tendencies in the field of portrait painting. He also describes the famous artists` portrait painting creations that have contributed to the spiritual emancipation of the creating personality and the establishment of new plastic tendencies in the fi eld of portrait painting. In the article, there are examples of representative portraits that are described in the context of the period when they were created. The author identifi es the methods, techniques, ideas and aspirations used in the works of plastic artists for drawing portraits that allow to form an ample conception about this phenomenon. The presented information is useful to artists, teachers and students who work in the field of visual art.

  1. Pendekatan Pemandangan Realistik dengan Menggunakan Digital Matte Painting

    Directory of Open Access Journals (Sweden)

    Satrya Mahardhika

    2011-04-01

    Full Text Available Movie is one entertainment that is favored by most people. Scenery appearance and spectacular shoots made movie needs high budget for the production. There are shoots looking difficult and needing extra efforts, but obviously it could be solved by using latest technology. Such technology is a combination of 3D and digital painting or image so it could bring digital painting alive: matte painting, a breakthrough in visual effects and movie. The research is conducted through exploration from manipulated images, references and retrieved real images in the specific place. Camera movement is also an important frame to define how far the image will be seen in the camera. So, when it is applied, it has no images that less-showed in camera framing. Although it has limitation in 2D images taken from limited frame, digital matte painting is able to answer industry needs in entertainment to create things that look real.  

  2. 4D Visualization of Painted Sculpture and Murals

    Science.gov (United States)

    Ai, M. Y.; Tong, H.; Shen, L.; Wang, R. X.; Zhang, F.; Zhang, Z. C.; Hu, Q. W.; Zhu, Y. X.; Zhang, H.

    2015-08-01

    Most cultural heritage applications address visualization with using various media or platforms: desktop-based multimedia presentations, museum kiosks, or videos produced with computer animation. However, these techniques can not directly reveal or show the course that the colorful surface of painted sculpture and murals becomes faint along with the change of the climate and time. Most current techniques just preserve the current appearance and disseminate the current situation of the painted sculpture and murals. The course how these forms of cultural heritage change along the time has not been visualized. In this paper we developed an approach to modelling of painted sculpture and murals that has undergone changes over the years. Different hypotheses has also be given if there is uncertainty. A painted sculpture of Mogao Grottoes is used to demonstate this approach.

  3. Development of paint area estimation software for ship compartments and structures

    Directory of Open Access Journals (Sweden)

    Doo-Yeoun Cho

    2016-03-01

    Full Text Available The painting process of large ships is an intense manual operation that typically comprises 9–12% of the total shipbuilding cost. Accordingly, shipbuilders need to estimate the required amount of anti-corrosive coatings and painting resources for inventory and cost control. This study aims to develop a software system which enables the shipbuilders to estimate paint area using existing 3D CAD ship structural models. The geometric information of the ships structure are extracted from the existing shipbuilding CAD/CAM system and used to create painting zones. After specifying the painting zones, users can generate the paint faces by clipping structural parts inside each zone. Finally, the paint resources may be obtained from the product of the paint areas and required paint thickness. Implementing the developed software system to real shipbuilders' operations has contributed to improved productivity, faster resource estimation, better accuracy, and fewer coating defects over their conventional manual calculation methods for painting resource estimation.

  4. Results of a M = 5.3 heat transfer test of the integrated vehicle using phase-change paint techniques on the 0.0175-scale model 56-OTS in the NASA/Ames Research Center 3.5-foot hypersonic wind tunnel

    Science.gov (United States)

    Marroquin, J.

    1985-01-01

    An experimental investigation was performed in the NASA/Ames Research Center 3.5-foot Hypersonic Wind Tunnel to obtain supersonic heat-distribution data in areas between the orbiter and external tank using phase-change paint techniques. The tests used Novamide SSV Model 56-OTS in the first and second-stage ascent configurations. Data were obtained at a nominal Mach number of 5.3 and a Reynolds number per foot of 5 x 10 to the 6th power with angles of attack of 0 deg, +/- 5 deg, and sideslip angles of 0 deg and +/- 5 deg.

  5. The Effect of Pigment Volume Concentration on Film Formation and the Mechanical Properties of Coatings Based on Water-Dispersion Paint and Varnish Materials

    Science.gov (United States)

    Kasyanenko, I. M.; Kramarenko, V. Yu.

    2018-01-01

    The effect of pigment volume concentration (PVC) on the film formation process and properties of coatings based on the water dispersion of an Acronal 290D styrene-acrylate copolymer and a pigment/filler system used for paint materials in construction was investigated. An analysis of the results obtained is performed within the framework of the concept of the critical PVC. It is shown that the initiation and development of internal stresses occurs the faster, the higher the PVC, but the position of the maximum or the inflection point of the internal stress-drying time curve complies with a universal value of the solid volume content in the compositions. It is found that the internal stresses and Young's modulus of coatings are characterized by an extreme concentration relation that, for the reduced elastic modulus, can be described by a system of equations based on the Halpin-Tsai equation.

  6. Experiments on an Exhaust Hood for the Paint Industry

    DEFF Research Database (Denmark)

    Nielsen, Peter V.; Madsen, Ulla; Tveit, David J.

    There is a great variation of production machinery and pollution sources in the paint industry. This paper shows the examination of a process where wood preservation is filled into cans in a process which releases organic solvents to the surrounding air.......There is a great variation of production machinery and pollution sources in the paint industry. This paper shows the examination of a process where wood preservation is filled into cans in a process which releases organic solvents to the surrounding air....

  7. New data on painted stone slabs from Southern Peru

    OpenAIRE

    Faron-Bartels, Renata

    2011-01-01

    After analysing museum collections, studying bibliographical sources and undertaking two surface prospections at Pampacolca the author carried out the archaeological project “Lajas Pintadas de Pampacolca” (painted stone slabs from Pampacolca) in August and September 2001 with the objective of investigating these stones or rather the painted ceramic boards in more detail. The essential task set for this project consisted in obtaining artefacts from preferably undisturbed contexts at various ar...

  8. Audience Perception of Effective Communication in Nigerian Paintings

    Directory of Open Access Journals (Sweden)

    Johnson Adelani Abodunrin

    2017-01-01

    Full Text Available Artists in Nigeria perceived effective communication differently irrespective of the socio-economic status.Communication effectiveness depends largely on the understanding of the message being passed between a sender and a receiver. Painting has been used over time to express emotion and feeling to the perceiving audience. The study is audience’s perception of communication in Nigeria painting and how it varies with the socio-economic characteristics such as age, education, gender, and being professional artist or art lovers. Questionnaires were distributed and administered to examine how the status of the art audience makes or mars effective communication in painting. The inferential statistics that were employed include “chi-square test” to test the relationship between different variables. The data were taken in ordinal form using Likert’s scale, and transformed into interval data. This was done by attaching statistical weights to the responses in the order of importance which were summed up for the parametric testing. Findings show that gender factor has nothing to do with the understanding of paintings. Also, the level of education obtained by the audience does not have much to do with understanding of contemporary Nigerian painting but a better exposure to the issue concerning the stylistic development of Nigerian painting. Art practitioners must adequately be guided on stylistic trend in painting, art education should be more intensified in educational curriculum in Nigeria. The paper concludes that audience requires a better exposure to the issues concerning the stylistic development of Nigerian painting for effective communication to take place.

  9. Clay ground in paintings: from Northern to Southern Europe

    DEFF Research Database (Denmark)

    Buti, David; Vila, Anna; Haack Christensen, Anne

    The use of clay grounds containing quartz was first observed in the Netherlands in artworks from Rembrandt’s workshop after 1640 [1, 2]. In addition, contemporary written sources outside the Netherlands mention this practice in Italy and Spain [2]. However, the reason for using clay as a constitu...... in Rembrandt´s workshop and in paintings by his contemporaries", in E. van de Wetering et al. A Corpus of Rembrandt Paintings, 2011, 318-334 + 660-677. Springer, Dordrecht...

  10. Painting Dose: The ART of Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Hannah J. [College of Physicians & Surgeons, Columbia University, New York, New York (United States); Department of Radiation Oncology, Massachusetts General Hospital, Boston, Massachusetts (United States); Zietman, Anthony L. [Department of Radiation Oncology, Massachusetts General Hospital, Boston, Massachusetts (United States); Harvard Medical School, Boston, Massachusetts (United States); Efstathiou, Jason A., E-mail: jefstathiou@partners.org [Department of Radiation Oncology, Massachusetts General Hospital, Boston, Massachusetts (United States); Harvard Medical School, Boston, Massachusetts (United States)

    2016-11-15

    The discovery of X rays in 1895 captivated society like no other scientific advance. Radiation instantly became the subject not only of numerous scientific papers but also of circus bazaars, poetry, fiction, costume design, comics, and marketing for household items. Its spread was “viral.” What is not well known, however, is its incorporation into visual art, despite the long tradition of medicine and surgery as a subject in art. Using several contemporary search methods, we identified 5 examples of paintings or sculpture that thematically feature radiation therapy. All were by artists with exhibited careers in art: Georges Chicotot, Marcel Duchamp, David Alfaro Siqueiros, Robert Pope, and Cookie Kerxton. Each artist portrays radiation differently, ranging from traditional healer, to mysterious danger, to futuristic propaganda, to the emotional challenges of undergoing cancer therapy. This range captures the complex role of radiation as both a therapy and a hazard. Whereas some of these artists are now world famous, none of these artworks are as well known as their surgical counterparts. The penetration of radiation into popular culture was rapid and pervasive; yet, its role as a thematic subject in art never fully caught on, perhaps because of a lack of understanding of the technology, radiation's intangibility, or even a suppressive effect of society's ambivalent relationship with it. These 5 artists have established a rich foundation upon which pop culture and art can further develop with time to reflect the extraordinary progress of modern radiation therapy.

  11. Painting Dose: The ART of Radiation

    International Nuclear Information System (INIS)

    Roberts, Hannah J.; Zietman, Anthony L.; Efstathiou, Jason A.

    2016-01-01

    The discovery of X rays in 1895 captivated society like no other scientific advance. Radiation instantly became the subject not only of numerous scientific papers but also of circus bazaars, poetry, fiction, costume design, comics, and marketing for household items. Its spread was “viral.” What is not well known, however, is its incorporation into visual art, despite the long tradition of medicine and surgery as a subject in art. Using several contemporary search methods, we identified 5 examples of paintings or sculpture that thematically feature radiation therapy. All were by artists with exhibited careers in art: Georges Chicotot, Marcel Duchamp, David Alfaro Siqueiros, Robert Pope, and Cookie Kerxton. Each artist portrays radiation differently, ranging from traditional healer, to mysterious danger, to futuristic propaganda, to the emotional challenges of undergoing cancer therapy. This range captures the complex role of radiation as both a therapy and a hazard. Whereas some of these artists are now world famous, none of these artworks are as well known as their surgical counterparts. The penetration of radiation into popular culture was rapid and pervasive; yet, its role as a thematic subject in art never fully caught on, perhaps because of a lack of understanding of the technology, radiation's intangibility, or even a suppressive effect of society's ambivalent relationship with it. These 5 artists have established a rich foundation upon which pop culture and art can further develop with time to reflect the extraordinary progress of modern radiation therapy.

  12. Scientific Basis for Paint Stripping: Elucidated Combinatorial Mechanism of Methylene Chloride and Phenol Based Paint Removers

    Science.gov (United States)

    2014-01-22

    TiO2 9.5 Isobutyl ketone 0.1 Iron oxide hydrate 2.5 n-Butyl acid phosphate 0.1 Carbazole dioxazine violet ɘ.1 Bentone 0.5 Table 3: MIL-PRF-85285...partial formulation films, with pigments and no fillers, and full formulation films of current military polyurethane coatings were analyzed in this...time of the solvents. 22-01-2014 Memorandum Report Paint stripper Methylene chloride Phenol Polyurethane 7 June 2012 – 6 June 2013 SERDP WP-2244

  13. The Effect of Ash and Inorganic Pigment Fill on the Atomic Oxygen Erosion of Polymers and Paints (ISMSE-12)

    Science.gov (United States)

    Banks, Bruce A.; Simmons, Julie C.; de Groh, Kim K.; Miller, Sharon K.

    2012-01-01

    Low atomic oxygen fluence (below 1x10(exp 20) atoms/sq cm) exposure of polymers and paints that have a small ash content and/or inorganic pigment fill does not cause a significant difference in erosion yield compared to unfilled (neat) polymers or paints. However, if the ash and/or inorganic pigment content is increased, the surface population of the inorganic content will begin to occupy a significant fraction of the surface area as the atomic oxygen exposure increases because the ash is not volatile and remains as a loosely attached surface layer. This results in a reduction of the flux of atomic oxygen reacting with the polymer and a reduction in the rate of erosion of the polymer remaining. This paper presents the results of ground laboratory and low Earth orbital (LEO) investigations to evaluate the fluence dependence of atomic oxygen erosion yields of polymers and paints having inorganic fill content.

  14. A New Quantitative Method for the Non-Invasive Documentation of Morphological Damage in Paintings Using RTI Surface Normals

    Directory of Open Access Journals (Sweden)

    Marcello Manfredi

    2014-07-01

    Full Text Available In this paper we propose a reliable surface imaging method for the non-invasive detection of morphological changes in paintings. Usually, the evaluation and quantification of changes and defects results mostly from an optical and subjective assessment, through the comparison of the previous and subsequent state of conservation and by means of condition reports. Using quantitative Reflectance Transformation Imaging (RTI we obtain detailed information on the geometry and morphology of the painting surface with a fast, precise and non-invasive method. Accurate and quantitative measurements of deterioration were acquired after the painting experienced artificial damage. Morphological changes were documented using normal vector images while the intensity map succeeded in highlighting, quantifying and describing the physical changes. We estimate that the technique can detect a morphological damage slightly smaller than 0.3 mm, which would be difficult to detect with the eye, considering the painting size. This non-invasive tool could be very useful, for example, to examine paintings and artwork before they travel on loan or during a restoration. The method lends itself to automated analysis of large images and datasets. Quantitative RTI thus eases the transition of extending human vision into the realm of measuring change over time.

  15. Composting of waste paint sludge containing melamine resin as affected by nutrients and gypsum addition and microbial inoculation

    International Nuclear Information System (INIS)

    Tian Yongqiang; Chen Liming; Gao Lihong; Michel, Frederick C.; Wan Caixia; Li Yebo; Dick, Warren A.

    2012-01-01

    Melamine formaldehyde resins have hard and durable properties and are found in many products, including automobile paints. These resins contain high concentrations of nitrogen and, if properly composted, can yield valuable products. We evaluated the effects of starter compost, nutrients, gypsum and microbial inoculation on composting of paint sludge containing melamine resin. A bench-scale composting experiment was conducted at 55 °C for 91 days and then at 30 °C for an additional 56 days. After 91 days, the composts were inoculated with a mixed population of melamine-degrading microorganisms. Melamine resin degradation after the entire 147 days of composting varied between 73 and 95% for the treatments with inoculation of microorganisms compared to 55–74% for the treatments without inoculation. Degradation was also enhanced by nutrients and gypsum additions. Our results infer that large scale composting of melamine resins in paint sludge is possible. - Highlights: ► Melamine resin in waste paint sludges could be efficiently composted at bench scale. ► Melamine resin degradation after 147 days of composting was 73–95% complete. ► Nutrients, gypsum and melamine-degrading microorganisms increased composting rate. ► Melamine degradation products first increased and then decreased in the compost. ► Final compost was enriched in nitrogen and other essential plant nutrients. - Melamine resin in waste paint sludges was efficiently composted at bench scale, with finished composts having low levels of heavy metals and enriched in plant nutrients.

  16. Synthesis of goodness and beauty of Petrikivsky decorative painting

    Directory of Open Access Journals (Sweden)

    T. A. Harkava

    2017-06-01

    Full Text Available Petrykivsky decorative painting as a unique manifestation of Ukrainian national culture has been studied in the article. This painting is recognized all over the world as an intangible cultural heritage of humanity in the context of its philosophical principles. Petrykivsky decorative painting by its basis — murals,  reaches Tripoli and puts the Ukrainian culture among the ancient cultures of the world. At various stages of ethnos’ existence, Ukrainian folk decorative art was an important part of the spiritual life and reflected its identity, ensuring the continuity of spiritual connection between generations. Motives of Petrykivka decorative painting describe the local flora and fauna and the local historical tradition. Folk artists get their inspiration from the mother nature, traditional for the Ukrainian people worship to Mother-land and all beautiful things, which are created by it. However, Petrykivsky decorative painting is not a direct reflection of natural motifs. World, created in paintings, is the product of the imagination of folk artist. Calocagathia (synthesis of beauty and goodness of Petrykivsky school is seen in high spiritual and moral culture of the Ukrainian people, in their pursuit to improve the space of their life, to perpetuate the generous beauty of the world by the love to beauty and goodness in all its forms using a variety of colors and patterns.

  17. Self-Cleaning Mineral Paint for Application in Architectural Heritage

    Directory of Open Access Journals (Sweden)

    Sudipto Pal

    2016-10-01

    Full Text Available A mineral silicate paint has been developed for architectural heritage. To enhance durability, any type of organic additive has been avoided. Potassium silicate was the binder agent intended to give strong adherence and durability to stone and concretes. Incorporation of mainly anatase titanium dioxide was intended to act both as a white, bright pigment and as a photocatalyst. Reflectivity analyses on the paint in the visible-to-near infrared wavelength region show high solar heat reflection. The self-cleaning activity of the mineral paint was evaluated by the degradation of organic dyes under solar light irradiation. Anatase titania was effective in decomposing organic and airborne pollutants with the solar radiation. The optical properties and self-cleaning activity were compared with the organic binder-based paints and commercial paints. Developed paints possess high stability: since they contain only inorganic components that do not fade with exposure to solar radiation, photocatalytic self-cleaning capability further enhances such stability.

  18. Experiencing art: the influence of expertise and painting abstraction level

    Directory of Open Access Journals (Sweden)

    Elina ePihko

    2011-09-01

    Full Text Available How does expertise influence the perception of representational and abstract paintings? We asked 20 experts on art history and 20 laypersons to explore and evaluate a series of paintings ranging in style from representational to abstract in five categories. We compared subjective aesthetic judgments and emotional evaluations, gaze patterns, and electrodermal reactivity between the two groups of participants. The level of abstraction affected aesthetic judgments and emotional valence ratings of the laypersons but had no effect on the opinions of the experts: the laypersons’ aesthetic and emotional ratings were highest for representational paintings and lowest for abstract paintings, whereas the opinions of the experts were independent of the abstraction level. The gaze patterns of both groups changed as the level of abstraction increased: the number of fixations and the length of the scanpaths increased while the duration of the fixations decreased. The viewing strategies—reflected in the target, location and path of the fixations—however indicated that experts and laypersons paid attention to different aspects of the paintings. The electrodermal reactivity did not vary according to the level of abstraction in either group but expertise was reflected in weaker responses, compared with laypersons, to information received about the paintings.

  19. Predicting sugar-sweetened behaviours with theory of planned behaviour constructs: Outcome and process results from the SIPsmartER behavioural intervention

    Science.gov (United States)

    Zoellner, Jamie M.; Porter, Kathleen J.; Chen, Yvonnes; Hedrick, Valisa E.; You, Wen; Hickman, Maja; Estabrooks, Paul A.

    2017-01-01

    Objective Guided by the theory of planned behaviour (TPB) and health literacy concepts, SIPsmartER is a six-month multicomponent intervention effective at improving SSB behaviours. Using SIPsmartER data, this study explores prediction of SSB behavioural intention (BI) and behaviour from TPB constructs using: (1) cross-sectional and prospective models and (2) 11 single-item assessments from interactive voice response (IVR) technology. Design Quasi-experimental design, including pre- and post-outcome data and repeated-measures process data of 155 intervention participants. Main Outcome Measures Validated multi-item TPB measures, single-item TPB measures, and self-reported SSB behaviours. Hypothesised relationships were investigated using correlation and multiple regression models. Results TPB constructs explained 32% of the variance cross sectionally and 20% prospectively in BI; and explained 13–20% of variance cross sectionally and 6% prospectively. Single-item scale models were significant, yet explained less variance. All IVR models predicting BI (average 21%, range 6–38%) and behaviour (average 30%, range 6–55%) were significant. Conclusion Findings are interpreted in the context of other cross-sectional, prospective and experimental TPB health and dietary studies. Findings advance experimental application of the TPB, including understanding constructs at outcome and process time points and applying theory in all intervention development, implementation and evaluation phases. PMID:28165771

  20. The identification of synthetic organic pigments in modern paints and modern paintings using pyrolysis-gas chromatography-mass spectrometry.

    Science.gov (United States)

    Russell, Joanna; Singer, Brian W; Perry, Justin J; Bacon, Anne

    2011-05-01

    A collection of more than 70 synthetic organic pigments were analysed using pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). We report on the analysis of diketo-pyrrolo-pyrrole, isoindolinone and perylene pigments which are classes not previously reported as being analysed by this technique. We also report on a number of azo pigments (2-naphthol, naphthol AS, arylide, diarylide, benzimidazolone and disazo condensation pigments) and phthalocyanine pigments, the Py-GC-MS analysis of which has not been previously reported. The members of each class were found to fragment in a consistent way and the pyrolysis products are reported. The technique was successfully applied to the analysis of paints used by the artist Francis Bacon (1909-1992), to simultaneously identify synthetic organic pigments and synthetic binding media in two samples of paint taken from Bacon's studio and micro-samples taken from three of his paintings and one painting attributed to him.

  1. Dose painting based on tumor uptake of Cu-ATSM and FDG: a comparative study

    International Nuclear Information System (INIS)

    Clausen, Malene Martini; Hansen, Anders Elias; Lundemann, Michael; Hollensen, Christian; Pommer, Tobias; Munck af Rosenschöld, Per; Kristensen, Annemarie Thuri; Kjær, Andreas; McEvoy, Fintan J; Engelholm, Svend Aage

    2014-01-01

    Hypoxia and increased glycolytic activity of tumors are associated with poor prognosis. The purpose of this study was to investigate differences in radiotherapy (RT) dose painting based on the uptake of 2-deoxy-2-[ 18 F]-fluorodeoxyglucose (FDG) and the proposed hypoxia tracer, copper(II)diacetyl-bis(N 4 )-methylsemithiocarbazone (Cu-ATSM) using spontaneous clinical canine tumor models. Positron emission tomography/computed tomography scans of five spontaneous canine sarcomas and carcinomas were obtained; FDG on day 1 and 64 Cu-ATSM on day 2 and 3 (approx. 3 and 24 hours pi.). Sub-volumes for dose escalation were defined by a threshold-based method for both tracers and five dose escalation levels were formed in each sub-volume. Volumetric modulated arc therapy plans were optimized based on the dose escalation regions for each scan for a total of three dose plans for each dog. The prescription dose for the GTV was 45 Gy (100%) and it was linearly escalated to a maximum of 150%. The correlations between dose painting plans were analyzed with construction of dose distribution density maps and quality volume histograms (QVH). Correlation between high-dose regions was investigated with Dice correlation coefficients. Comparison of dose plans revealed varying degree of correlation between cases. Some cases displayed a separation of high-dose regions in the comparison of FDG vs. 64 Cu-ATSM dose plans at both time points. Among the Dice correlation coefficients, the high dose regions showed the lowest degree of agreement, indicating potential benefit of using multiple tracers for dose painting. QVH analysis revealed that FDG-based dose painting plans adequately covered approximately 50% of the hypoxic regions. Radiotherapy plans optimized with the current approach for cut-off values and dose region definitions based on FDG, 64 Cu-ATSM 3 h and 24 h uptake in canine tumors had different localization of the regional dose escalation levels. This indicates that 64 Cu-ATSM at two

  2. Painting for nuclear power stations and machinery and equipments according to quality assurance program of ANSI

    International Nuclear Information System (INIS)

    Fukuda, Shinzo; Tsuchiya, Yukikazu.

    1979-01-01

    Recently, painting for nuclear power stations is carried out with the paints made domestically, and these paints are tested and judged generally according to the items of performance evaluation decided by the American National Standard Institute. In Japan, there is no standard regarding the paints for nuclear power stations. Painting is very important process, and it is appropriate to introduce quality assurance program into it. In this paper, the contents of ANSI standard concerning the paints and painting for nuclear power stations are explained, and the outline of the painting of heat exchangers carried out in accordance with the quality assurance program in the Tamano Shipyard, Mitsui Shipbuilding and Engineering Co., Ltd., is described. The test items for evaluating the general performance of the paints, the testing method for evaluating the endurance at the time of an accident, the quality assurance for the paints used for the facilities handling radiation and others are explained. Various problems arise when the quality assurance program of ANSI is applied actually to painting. It is difficult to judge the quality of paints and painting with numerical values, and much efforts were required to establish the quality assurance organization. The conditions for painting, the handling of many documents, the measures to unsatisfactory painting and so on caused much difficulties. (Kako, I.)

  3. Trajectory Optimization of Spray Painting Robot for Complex Curved Surface Based on Exponential Mean Bézier Method

    Directory of Open Access Journals (Sweden)

    Wei Chen

    2017-01-01

    Full Text Available Automated tool trajectory planning for spray painting robots is still a challenging problem, especially for a large complex curved surface. This paper presents a new method of trajectory optimization for spray painting robot based on exponential mean Bézier method. The definition and the three theorems of exponential mean Bézier curves are discussed. Then a spatial painting path generation method based on exponential mean Bézier curves is developed. A new simple algorithm for trajectory optimization on complex curved surfaces is introduced. A golden section method is adopted to calculate the values. The experimental results illustrate that the exponential mean Bézier curves enhanced flexibility of the path planning, and the trajectory optimization algorithm achieved satisfactory performance. This method can also be extended to other applications.

  4. Laser Cleaning and Spectroscopy: A Synergistic Approach in the Conservation of a Modern Painting

    International Nuclear Information System (INIS)

    Melessanaki, K.; Fotakis, C.; Anglos, D.; Stringari, C.; Solomon, R.

    2006-01-01

    We present results from preliminary laser cleaning studies performed on a 20th century modern painting, in which laser-induced breakdown spectroscopy (LIBS) was employed for monitoring the progress of material removal. This synergistic approach, that combines laser ablation cleaning with spectroscopic control, is of obvious importance as it offers a reliable means of ensuring proper conservation and could be the basis of a standard protocol for laser-based restoration procedures.

  5. Salvador Dalí's paintings to introduce Quantum Mechanics concepts in High School

    OpenAIRE

    Rúbia de Fátima Antunes Martins Fernandes; Flaviston Ferreira Pires; Thaís Cyrino de Mello Forato; José Alves da Silva

    2017-01-01

    A few papers have presented results of teaching Quantum Mechanics in High School. As a high abstraction level is demanded, it is necessary to reconsider theoretical assumptions, approaches and methodologies, in order to reduce difficulties in its insertion. This paper presents the achievements of a research, which is a didactic proposal for High School comprising discussions about Quantum Mechanics, involving elements that relate Physics and some paintings of Salvador Dalí. Embracing the rela...

  6. Investigation of Layer Structure of the Takamatsuzuka Mural Paintings by Terahertz Imaging Technique

    Science.gov (United States)

    Inuzuka, M.; Kouzuma, Y.; Sugioka, N.; Fukunaga, K.; Tateishi, T.

    2017-04-01

    Terahertz imaging can be a powerful tool in conservation science for cultural heritages. In this study, a new terahertz imaging system was applied to the Takamatsuzuka mural painting of a blue dragon, and the condition of the plaster layer was diagnosed. As a result, the locations where the plaster layer appears solid on the surface but in actuality may have peeled off the underlying tuff stone were revealed and viewed as two-dimensional images.

  7. Degradation of Emerald green in oil paint and its contribution to the rapid change in colour of the Descente des vaches (1834-1835) painted by Theodore Rousseau

    NARCIS (Netherlands)

    Keune, K.; Boon, J.J.; Boitelle, R.; Shimadzu, Y.

    2013-01-01

    Descente des vaches (1836) by Theodore Rousseau in the Mesdag Collection in The Hague is barely readable and its paint layers are in poor condition. The surface of the painting is strongly deformed and cracked, the whole painting has darkened and especially the greens have lost all or most of their

  8. Graffiti for science: Qualitative detection of erosional patterns through bedrock erosion painting

    Science.gov (United States)

    Beer, Alexander R.; Kirchner, James W.; Turowski, Jens M.

    2016-04-01

    during flushing events. Further, the photographs clearly show the erosional development of a UFCS (upstream-facing convex surface) feature with an upstream-facing surface full of impact marks, a sharp crest-line, and an adjacent downstream-facing surface preserved from sediment impacts. This pilot study documents that bedrock erosion painting provides an easy, cost-efficient and clear qualitative method for detecting the spatial distribution of bedrock erosion and inferring its controlling factors. Our results show that the susceptibility of a painted surface to abrasion is controlled by its position in the channel and its spatial orientation relative to the sediment-laden flow. Erosion painting is a scientifically useful form of graffiti that could be widely applied in both natural and laboratory settings, providing insight into patterns and processes of erosion.

  9. Tapestry paintings in the main church in Breda

    Directory of Open Access Journals (Sweden)

    Micha Leeflang

    2010-02-01

    Full Text Available This article is an adaptation of some reports made between 2005 and 2007 for the art-historical preliminary research into the restorations of the wall paintings in the main church in Breda. In addition, a proposal for restoration is given for the paintings dealt with, emphasizing the preservation of the representations. The first priority in all the paintings is consolidating loose paint and removing dirt from the surface. Subsequently, old putty is removed so as to expose the original painting as much as possible. During the restoration large voids will have to be filled up in a neutral shade – in a lighter shade than the original – so that the distinction between original and restoration remains visible. On the south choir wall in the second bay of the ambulatory at the top three pairs of yellow cloth scissors are painted on a green field (illustration 1. As scissors were an important element in the textile industry, it is plausible that this chapel was painted on the instructions of the cloth guild (illustration 2. The various stages in the production process of the cloth were strictly inspected. These inspections were accompanied by affixing lead seals (illustration 3, which could be considered a full guarantee for the client. Around the scissors in the cloth- scissors chapel in Breda small circles are painted, which were not mentioned in the literature. Although the exact meaning is unknown, these circles could represent lead seals and could thus be a reference to the high quality of the products of the cloth guild in Breda. Both on the second choir pillar at the southside and on the freestanding clustered pillar in the south ambulatory angels with a red cloth of honour are painted (illustration 7, 9 and 10. The former painting dates from approximately 1510-1520 and the latter from the second half of the sixteenth century. It is very likely that the red painted cloth of honour functioned as a background for a sculpture. In miniature art

  10. Dynamic torsional response analysis of mechanoluminescent paint and its application to non-contacting automotive torque transducers

    International Nuclear Information System (INIS)

    Kim, Gi-Woo; Kim, Ji-Sik

    2014-01-01

    This paper presents the result of a preliminary experimental study on the dynamic torsional response analysis of mechanoluminescent (ML) paint for potential development as a new type of non-contacting torque transducer. The torsional torque applied to a transmission shaft is measured by sensing the ML intensity emitting from an ML paint coating a transmission shaft. This study provides the fundamental knowledge for the development of new non-contacting torque sensing technology based on the ML intensity detection. The proposed measurement principle appears to offer potential applications in automotive torque measurement systems, even though the loading rate-dependent characteristics of the ML intensity needs to be examined further. (paper)

  11. Dynamic torsional response analysis of mechanoluminescent paint and its application to non-contacting automotive torque transducers

    Science.gov (United States)

    Kim, Gi-Woo; Kim, Ji-Sik

    2014-01-01

    This paper presents the result of a preliminary experimental study on the dynamic torsional response analysis of mechanoluminescent (ML) paint for potential development as a new type of non-contacting torque transducer. The torsional torque applied to a transmission shaft is measured by sensing the ML intensity emitting from an ML paint coating a transmission shaft. This study provides the fundamental knowledge for the development of new non-contacting torque sensing technology based on the ML intensity detection. The proposed measurement principle appears to offer potential applications in automotive torque measurement systems, even though the loading rate-dependent characteristics of the ML intensity needs to be examined further.

  12. Development of environmentally friendly coatings and paints using medium-chain-length poly(3-hydroxyalkanoates) as the polymer binder.

    Science.gov (United States)

    van der Walle, G A; Buisman, G J; Weusthuis, R A; Eggink, G

    1999-01-01

    Unsaturated medium-chain-length poly(3-hydroxyalkanoates) (mcl-PHAs) produced by Pseudomonas putida from linseed oil fatty acids (LOFA) and tall oil fatty acids (TOFA), were used as the polymer binder in the formulation of high solid alkyd-like paints. The relatively high concentration of unsaturated alkyl side chains incorporated into the PHA resins resulted in oxidative drying PHA paints having excellent coating properties. The homogeneously pigmented PHA coatings yielded high-gloss, smooth and strong films upon curing and showed an excellent flexibility, a good adhesion to different substrates, cohesive film properties and resistance to chipping.

  13. Aesthetic Emotions Across Arts: A Comparison Between Painting and Music

    Science.gov (United States)

    Miu, Andrei C.; Pițur, Simina; Szentágotai-Tătar, Aurora

    2016-01-01

    Emotional responses to art have long been subject of debate, but only recently have they started to be investigated in affective science. The aim of this study was to compare perceptions regarding frequency of aesthetic emotions, contributing factors, and motivation which characterize the experiences of looking at painting and listening to music. Parallel surveys were filled in online by participants (N = 971) interested in music and painting. By comparing self-reported characteristics of these experiences, this study found that compared to listening to music, looking at painting was associated with increased frequency of wonder and decreased frequencies of joyful activation and power. In addition to increased vitality, as reflected by the latter two emotions, listening to music was also more frequently associated with emotions such as tenderness, nostalgia, peacefulness, and sadness. Compared to painting-related emotions, music-related emotions were perceived as more similar to emotions in other everyday life situations. Participants reported that stimulus features and previous knowledge made more important contributions to emotional responses to painting, whereas prior mood, physical context and the presence of other people were considered more important in relation to emotional responses to music. Self-education motivation was more frequently associated with looking at painting, whereas mood repair and keeping company motivations were reported more frequently in relation to listening to music. Participants with visual arts education reported increased vitality-related emotions in their experience of looking at painting. In contrast, no relation was found between music education and emotional responses to music. These findings offer a more general perspective on aesthetic emotions and encourage integrative research linking different types of aesthetic experience. PMID:26779072

  14. Aesthetic Emotions Across Arts: A Comparison Between Painting and Music.

    Science.gov (United States)

    Miu, Andrei C; Pițur, Simina; Szentágotai-Tătar, Aurora

    2015-01-01

    Emotional responses to art have long been subject of debate, but only recently have they started to be investigated in affective science. The aim of this study was to compare perceptions regarding frequency of aesthetic emotions, contributing factors, and motivation which characterize the experiences of looking at painting and listening to music. Parallel surveys were filled in online by participants (N = 971) interested in music and painting. By comparing self-reported characteristics of these experiences, this study found that compared to listening to music, looking at painting was associated with increased frequency of wonder and decreased frequencies of joyful activation and power. In addition to increased vitality, as reflected by the latter two emotions, listening to music was also more frequently associated with emotions such as tenderness, nostalgia, peacefulness, and sadness. Compared to painting-related emotions, music-related emotions were perceived as more similar to emotions in other everyday life situations. Participants reported that stimulus features and previous knowledge made more important contributions to emotional responses to painting, whereas prior mood, physical context and the presence of other people were considered more important in relation to emotional responses to music. Self-education motivation was more frequently associated with looking at painting, whereas mood repair and keeping company motivations were reported more frequently in relation to listening to music. Participants with visual arts education reported increased vitality-related emotions in their experience of looking at painting. In contrast, no relation was found between music education and emotional responses to music. These findings offer a more general perspective on aesthetic emotions and encourage integrative research linking different types of aesthetic experience.

  15. Aesthetic emotions across arts: A comparison between painting and music

    Directory of Open Access Journals (Sweden)

    Andrei C. Miu

    2016-01-01

    Full Text Available Emotional responses to art have long been subject of debate, but only recently have they started to be investigated in affective science. The aim of this study was to compare perceptions regarding frequency of aesthetic emotions, contributing factors and motivation which characterize the experiences of looking at painting and listening to music. Parallel surveys were filled in online by participants (N = 971 interested in music and painting. By comparing self-reported characteristics of these experiences, this study found that compared to listening to music, looking at painting was associated with increased frequency of wonder and decreased frequencies of joyful activation and power. In addition to increased vitality, as reflected by the latter two emotions, listening to music was also more frequently associated with emotions such as tenderness, nostalgia, peacefulness and sadness. Compared to painting-related emotions, music-related emotions were perceived as more similar to emotions in other everyday life situations. Participants reported that stimulus features and previous knowledge made more important contributions to emotional responses to painting, whereas prior mood, physical context and the presence of other people were considered more important in relation to emotional responses to music. Self-education motivation was more frequently associated with looking at painting, whereas mood repair and keeping company motivations were reported more frequently in relation to listening to music. Participants with visual arts education reported increased vitality-related emotions in their experience of looking at painting. In contrast, no relation was found between music education and emotional responses to music. These findings offer a more general perspective on aesthetic emotions and encourage integrative research linking different types of aesthetic experience.

  16. The link between composition and balance in masterworks vs. paintings of lower artistic quality.

    Science.gov (United States)

    Vartanian, Oshin; Martindale, Colin; Podsiadlo, Jacob; Overbay, Shane; Borkum, Jonathan

    2005-11-01

    In painting, composition is commonly defined as the two-dimensional arrangement of elements within the canvas. Each element is considered to have a perceptual weight. The arrangement of these weighted elements determines how balanced a painting is. It has been suggested that due to superior composition, masterworks may be more balanced than works of lower artistic quality. We tested this hypothesis by instructing our participants to rate masterworks and selections of lower artistic quality on balance. This hypothesis was not supported. Second, it has been suggested that rearranging elements within a painting may have a more detrimental effect on composition (and by extension balance) in masterworks than in selections of lower artistic quality. This view associates works of higher artistic quality with visual rightness, thereby predicting that compositional change would be more likely to cause deviations from a visually right state in masterworks. We tested this hypothesis by displacing an element within each painting to a different location, and measuring the effect on balance. In accordance with recent findings in the literature, we also took into account the severity of the compositional alterations. The results demonstrated that compositional alteration affected balance ratings equally across masterworks and selections of lower artistic quality. These results demonstrate that, although balance is a function of compositional structure, balance on its own is not sufficient to distinguish between works of varying artistic quality. To the extent that balance is considered a function of composition, the results suggest that masterworks are distinguished from works of lower artistic quality for reasons other than solely composition.

  17. Coherent x-ray diffraction imaging of paint pigment particles by scanning a phase plate modulator

    International Nuclear Information System (INIS)

    Chu, Y.S.; Chen, B.; Zhang, F.; Berenguer, F.; Bean, R.; Kewish, C.; Vila-Comamala, J.; Rodenburg, J.; Robinson, I.

    2011-01-01

    We have implemented a coherent x-ray diffraction imaging technique that scans a phase plate to modulate wave-fronts of the x-ray beam transmitted by samples. The method was applied to measure a decorative alkyd paint containing iron oxide red pigment particles. By employing an iterative algorithm for wave-front modulation phase retrieval, we obtained an image of the paint sample that shows the distribution of the pigment particles and is consistent with the result obtained from a transmission x-ray microscope. The technique has been experimentally proven to be a feasible coherent x-ray imaging method with about 120 nm spatial resolution and was shown to work well with industrially relevant specimens.

  18. Development of water-borne thermosetting paint by radiation-induced emulsion polymerization

    International Nuclear Information System (INIS)

    Makuuchi, K.; Katakai, A.; Nakayama, H.

    1981-01-01

    In previous papers the features of γ-ray induced emulsion polymerization were studied to use the emulsion as vehicles for water-borne paint. In this paper, the physical properties of thermosetting paints made with emulsions containing N-(n-butoxymethyl)acrylamide (NBM) and hydroxyl and carboxyl functionality were investigated. Since NBM moieties can react with amide, hydroxyl, and carboxyl groups, NBM copolymer emulsions prepared in this study have the self-crosslinking capability. As far as it was investigated, it was difficult to prepare a stable emulsion containing 10% of NBM by the conventional emulsion polymerization by using a water soluble radical initiator such as persulfate. In addition to 1-liter reactor, a pilot-scale plant of 70 liters reactor was used for γ-ray induced emulsion polymerization. Experimental details are given, and results are discussed. (author)

  19. Non-invasive NMR stratigraphy of a multi-layered artefact: an ancient detached mural painting.

    Science.gov (United States)

    Di Tullio, Valeria; Capitani, Donatella; Presciutti, Federica; Gentile, Gennaro; Brunetti, Brunetto Giovanni; Proietti, Noemi

    2013-10-01

    NMR stratigraphy was used to investigate in situ, non-destructively and non-invasively, the stratigraphy of hydrogen-rich layers of an ancient Nubian detached mural painting. Because of the detachment procedure, a complex multi-layered artefact was obtained, where, besides layers of the original mural painting, also the materials used during the procedure all became constitutive parts of the artefact. NMR measurements in situ enabled monitoring of the state of conservation of the artefact and planning of minimum representative sampling to validate results obtained in situ by solid-state NMR analysis of the samples. This analysis enabled chemical characterization of all organic materials. Use of reference compounds and prepared specimens assisted data interpretation.

  20. Removing paint from a metal substrate using a flattened top laser

    International Nuclear Information System (INIS)

    Shi Shu-Dong; Li Wei; Du Peng; Wang Meng; Song Feng; Liu Shu-Jing; Chen Nian-Jiang; Zhao Hong; Yang Wen-Shi

    2012-01-01

    In this paper, we investigate laser cleaning using a flattened top laser to remove paint coating from a metal substrate. Under the irradiation of a flattened top laser, the coating paint of the metal substrate can be removed efficiently by laser induced ablation, stress, and displacement force. The temperature distribution, stress, and displacement are calculated in the coating layer and substrate using finite element analysis. The effects of a Gaussian laser and a flattened top laser and the results of different diameters of laser spot are compared. The investigation shows that the flattened top laser can reduce the substrate damage and enhance the cleaning efficiency. This method meets the need of large area industrial cleaning applications by optimizing the flattened top laser parameters