Psychosocial work environment and mental health among construction workers

NARCIS (Netherlands)

Boschman, J. S.; van der Molen, H. F.; Sluiter, J. K.; Frings-Dresen, M. H. W.

2013-01-01

We assessed psychosocial work environment, the prevalence of mental health complaints and the association between these two among bricklayers and construction supervisors. For this cross-sectional study a total of 1500 bricklayers and supervisors were selected. Psychosocial work characteristics were

Automated Construction of Node Software Using Attributes in a Ubiquitous Sensor Network Environment

Science.gov (United States)

Lee, Woojin; Kim, Juil; Kang, JangMook

2010-01-01

In sensor networks, nodes must often operate in a demanding environment facing restrictions such as restricted computing resources, unreliable wireless communication and power shortages. Such factors make the development of ubiquitous sensor network (USN) applications challenging. To help developers construct a large amount of node software for sensor network applications easily and rapidly, this paper proposes an approach to the automated construction of node software for USN applications using attributes. In the proposed technique, application construction proceeds by first developing a model for the sensor network and then designing node software by setting the values of the predefined attributes. After that, the sensor network model and the design of node software are verified. The final source codes of the node software are automatically generated from the sensor network model. We illustrate the efficiency of the proposed technique by using a gas/light monitoring application through a case study of a Gas and Light Monitoring System based on the Nano-Qplus operating system. We evaluate the technique using a quantitative metric—the memory size of execution code for node software. Using the proposed approach, developers are able to easily construct sensor network applications and rapidly generate a large number of node softwares at a time in a ubiquitous sensor network environment. PMID:22163678

Automated Construction of Node Software Using Attributes in a Ubiquitous Sensor Network Environment

Directory of Open Access Journals (Sweden)

JangMook Kang

2010-09-01

Full Text Available In sensor networks, nodes must often operate in a demanding environment facing restrictions such as restricted computing resources, unreliable wireless communication and power shortages. Such factors make the development of ubiquitous sensor network (USN applications challenging. To help developers construct a large amount of node software for sensor network applications easily and rapidly, this paper proposes an approach to the automated construction of node software for USN applications using attributes. In the proposed technique, application construction proceeds by first developing a model for the sensor network and then designing node software by setting the values of the predefined attributes. After that, the sensor network model and the design of node software are verified. The final source codes of the node software are automatically generated from the sensor network model. We illustrate the efficiency of the proposed technique by using a gas/light monitoring application through a case study of a Gas and Light Monitoring System based on the Nano-Qplus operating system. We evaluate the technique using a quantitative metric—the memory size of execution code for node software. Using the proposed approach, developers are able to easily construct sensor network applications and rapidly generate a large number of node softwares at a time in a ubiquitous sensor network environment.

Automated construction of node software using attributes in a ubiquitous sensor network environment.

Science.gov (United States)

Lee, Woojin; Kim, Juil; Kang, JangMook

2010-01-01

In sensor networks, nodes must often operate in a demanding environment facing restrictions such as restricted computing resources, unreliable wireless communication and power shortages. Such factors make the development of ubiquitous sensor network (USN) applications challenging. To help developers construct a large amount of node software for sensor network applications easily and rapidly, this paper proposes an approach to the automated construction of node software for USN applications using attributes. In the proposed technique, application construction proceeds by first developing a model for the sensor network and then designing node software by setting the values of the predefined attributes. After that, the sensor network model and the design of node software are verified. The final source codes of the node software are automatically generated from the sensor network model. We illustrate the efficiency of the proposed technique by using a gas/light monitoring application through a case study of a Gas and Light Monitoring System based on the Nano-Qplus operating system. We evaluate the technique using a quantitative metric-the memory size of execution code for node software. Using the proposed approach, developers are able to easily construct sensor network applications and rapidly generate a large number of node softwares at a time in a ubiquitous sensor network environment.

The morphological development of newly inundated intertidal areas: the mechanisms driving the early evolution of an estuarine environment designed and constructed by humans

Science.gov (United States)

Dale, Jonathan; Burgess, Heidi; Cundy, Andrew

2017-04-01

Intertidal saltmarsh and mudflat habitats are of global importance due to the ecosystem, economic and cultural services they provide. These services include wildlife habitat provision and species diversity, immobilisation of pollutants and protection from coastal flooding. Saltmarsh and mudflat environments are, however, being lost and degraded due to erosion caused by rising sea levels and increased storminess. These losses are exacerbated by anthropogenic influences including land reclamation, increased coastal development and the construction of coastal flood defences which prevent the landwards migration of saltmarsh and mudflat environments, resulting in coastal squeeze. To compensate for saltmarsh and mudflat losses areas of the coastal hinterland are being inundated by breaching defences and constructing new defences inland, thus extending or constructing new estuarine environments; a processes known as de-embankment or managed realignment. Morphological engineering and landscaping within managed realignment sites prior to site inundation varies depending on the aims of the scheme. However, there is a shortage of data on the morphological evolution within these sites post site inundation impeding the ability of coastal engineers to effectively design and construct future sites. To date there has been a focus on the colonisation of marine macro fauna and flora within newly inundated managed realignment sites, which can be relatively rapid and easily quantified. Little is known of the morphological evolution in response to altered sedimentary processes, its driving mechanisms and therefore the success and ecological sustainability of these sites. This study evaluates the post-inundation morphological development of the largest open coast managed realignment site in Europe, at Medmerry on the south coast of the United Kingdom. Inundated in September 2013, the Medmerry Managed Realignment Site consists of a mosaic of former agricultural land and areas of lower

Construction of an indicator of exposure to RF fields in urban environment

International Nuclear Information System (INIS)

Guidetto, T.; Bongio, E.; Gasparino, U.

2002-01-01

The aim of a specific task of the CTN-AGF (Centro Tematico Nazionale Agenti Fisici) was the construction of an environmental indicator for the exposure to electromagnetic fields produced by Radio Frequency sources (Base Transceiver Station particularly) in urban environment. The proposed indicator is descriptive and, in the DPSIR framework, is placed among the state indicators. The steps necessary to evaluate the indicator are: - theoretical computation of the electromagnetic field strength; - analysis of the spatial distribution of the potentially exposed population; - topological overlay of the geo referred constructed data

The environment and the construction of meanings in elementary education

Directory of Open Access Journals (Sweden)

Patrícia Barbosa Pereira

2012-12-01

Full Text Available Reflecting about the possibility of multiple meanings (the polisemy, parallel to the practices that bring the mecanism of repetition (paraphrase, we investigated which meanings students in school can understand under the framework of environment. Also, we analyzed how reading and writing may contribute for the construction of these different possibilities of meanings about environment. We adopted the French Discourse Analysis (DA as a methodological and theoretical frame of work. In addition, under the influence of Science, Technology and Society (STS studies, with a objective of a broader, more critical and reflexive approach for the concept of environment. Through of an education proposal, with the central theme of the environment, we developed, from the influence of media materials in the school context, activities that are related to the presence of an opening for polysemy in the classroom. We find that the paraphrase has become common in many activities, a sense of movement affiliation, in which, sometimes, the students have joined an environment with mainly natural features, sometimes with a social environment. Thus, the background provided by STS concomitantly with the arguments based in our teaching objectives, were able to disrupt this discourses dynamics throughout the course of these activities

Examining Collaborative Knowledge Construction in Microblogging-Based Learning Environments

Directory of Open Access Journals (Sweden)

Tian Luo

2017-09-01

Full Text Available Aim/Purpose: The purpose of the study is to provide foundational research to exemplify how knowledge construction takes place in microblogging-based learning environments, to understand learner interaction representing the knowledge construction process, and to analyze learner perception, thereby suggesting a model of delivery for microblogging. Background: Up-and-coming digital native learners crave the real-time, multimedia, global-interconnectedness of microblogging, yet there has been limited research that specifically proposes a working model of Twitter’s classroom integration for designers and practitioners without bundling it in with other social media tools. Methodology: This semester-long study utilized a case-study research design via a multi-dimensional approach in a hybrid classroom with both face-to-face and online environments. Tweets were collected from four types of activities and coded based on content within their contextual setting. Twenty-four college students participated in the study. Contribution: The findings shed light on the process of knowledge construction in mi-croblogging and reveal key types of knowledge manifested during learning activities. The study also proposes a model for delivering microblogging to formal learning environments applicable to various contexts for designers and practitioners. Findings: There are distinct learner interaction patterns representing the process of knowledge construction in microblogging activities ranging from low-order to high-order cognitive tasks. Students generally were in favor of the Twitter integration in this study. Recommendations for Practitioners: The three central activities (exploring hashtags, discussion topics, and participating in live chats along with the backchannel activity formulate a working model that represents the sequential process of Twitter integration into classrooms. Impact on Society: Microblogging allows learners omnichannel access while hashtags

Limitation of radioactive excursions by the containment construction

International Nuclear Information System (INIS)

Janssen, L.G.J.

1987-01-01

The last barrier against the spread of fission products into the environment consists, in nuclear power plants, of the containment construction or safety enclosure. A brief survey of the influence of such an enclosure on the safety of a nuclear power plant is outlined for the various containment constructions for light-water reactors. Also the possibilities of failure of these constructions are discussed and some processes are described which can contribute effectively on the quantity of fission products that can be spread into the environment in case of a reactor accident. (Auth.)

Measuring production loss due to health and work environment problems: construct validity and implications.

Science.gov (United States)

Karlsson, Malin Lohela; Bergström, Gunnar; Björklund, Christina; Hagberg, Jan; Jensen, Irene

2013-12-01

The aim was to validate two measures of production loss, health-related and work environment-related production loss, concerning their associations with health status and work environment factors. Validity was assessed by evaluating the construct validity. Health problems related and work environment-related problems (or factors) were included in separate analyses and evaluated regarding the significant difference in proportion of explained variation (R) of production loss. health problems production loss was not found to fulfill the criteria for convergent validity in this study; however, the measure of work environment-related production loss did fulfill the criteria that were set up. The measure of work environment-related production loss can be used to screen for production loss due to work environment problems as well as an outcome measure when evaluating the effect of organizational interventions.

Leveraging on Information Technology to Teach Construction Law to Built Environment Students: A Knowledge-Based System (KBS Approach

Directory of Open Access Journals (Sweden)

Faisal Manzoor Arain

2009-11-01

Full Text Available Construction law is a vital component of the body of knowledge that is needed by construction professionals in order to successfully operate in the commercial world of construction. Construction law plays an important role in shaping building projects. Construction projects are complex because they involve many human and non-human factors and variables. Teaching construction law is therefore a complex issue with several dimensions. In recent years, Information Technology (IT has become strongly established as a supporting tool for many professions, including teachers. If faculty members have a knowledge base established on similar past projects, it would assist the faculty members to present case studies and contractually based scenarios to students. This paper proposes potential utilisation of a Knowledge-based System (KBS for teaching construction law to built environment students. The KBS is primarily designed for building professionals to learn from similar past projects. The KBS is able to assist professionals by providing accurate and timelyinformation for decision making and a user-friendly tool for analysing and selecting the suggested controls for variations in educational buildings. It is recommended that the wealth of knowledge available in the KBS can be very helpful in teaching construction law to built environment students. The system presents real case studies and scenarios to students to allow them to analyse and learn construction law. The KBS could be useful to students as a general research tool because the students could populate it with their own data and use it with the reported educational projects. With further generic modifications, the KBS will also be useful for built environment students to learn about project management of building projects; thus, it will raise the overall level of professional understanding, and eventually productivity, in the construction industry.

Communication, coordination and cooperation in construction projects: business environment and human behaviours

Science.gov (United States)

Salah Alaloul, Wesam; Shahir Liew, Mohd; Zawawi, Noor Amila Wan

2017-12-01

The accomplishment of construction projects is extremely dependent on the integration of several stakeholders; therefore none of them has the control or the ability to accomplish the project alone. Each of them may influence and be influenced by the project management approach. There is no comprehensive theoretical platform for defining Communication, Coordination and Cooperation (3Cs) in the management of construction project. This paper deliberates the function of the 3Cs different theoretical perceptions. Through an analysis of selected articles from reputable academic journals in construction management, the business environment and human behaviour were identified as two main parts. A little has been done so far about the 3Cs, and how they are correlated with construction projects performance. Therefore, the objective of this paper is to explain the definitions and the association between the 3Cs. There is a significant link between communication and coordination. Coordination alternatively, is trust-based a logic of mutual and exchange. Consequently, cooperation is much more sophisticated, which needing more time and attempts.

Robot Competence Development by Constructive Learning

Science.gov (United States)

Meng, Q.; Lee, M. H.; Hinde, C. J.

This paper presents a constructive learning approach for developing sensor-motor mapping in autonomous systems. The system’s adaptation to environment changes is discussed and three methods are proposed to deal with long term and short term changes. The proposed constructive learning allows autonomous systems to develop network topology and adjust network parameters. The approach is supported by findings from psychology and neuroscience especially during infants cognitive development at early stages. A growing radial basis function network is introduced as a computational substrate for sensory-motor mapping learning. Experiments are conducted on a robot eye/hand coordination testbed and results show the incremental development of sensory-motor mapping and its adaptation to changes such as in tool-use.

Construct Validity of the Neighborhood Environment Walkability Scale for Africa.

Science.gov (United States)

Oyeyemi, Adewale L; Conway, Terry L; Adedoyin, Rufus A; Akinroye, Kingsley K; Aryeetey, Richmond; Assah, Felix; Cain, Kelli L; Gavand, Kavita A; Kasoma, Sandra S; Kolbe-Alexander, Tracy L; Lambert, Estelle V; Larouche, Richard; Moss, Sarah J; Ocansey, Reginald; Onywera, Vincent O; Prista, Antonio; Tremblay, Mark S; Sallis, James F

2017-03-01

The development of valid measures of built environments relevant for physical activity is an important step toward controlling the global epidemic of physical inactivity-related noncommunicable diseases and deaths. This study assessed the construct validity of a self-report neighborhood environment walkability scale adapted for Africa (NEWS-Africa), by examining relationships with self-reported walking for transportation and recreation using pooled data from six sub-Saharan African countries. NEWS was systematically adapted to assess urban, periurban, and rural environments in sub-Saharan Africa. Adults (n = 469, 18-85 yr, 49.7% women) from Cameroon, Ghana, Mozambique, Nigeria, South Africa, and Uganda were purposively recruited from neighborhoods varying in walkability and socioeconomic status, with some from villages. Participants completed the 76-item (13 subscales) NEWS-Africa by structured interview and reported weekly minutes of walking for transport and recreation using items from the International Physical Activity Questionnaire. The overall "walkability" index had a positive relationship with both walking for transportation (η = 0.020, P = 0.005) and recreation (η = 0.013, P = 0.028) in the pooled analyses. The mixed-use access and stranger danger scales were positively related with transport walking (η = 0.020, P = 0.006 and η = 0.021, P = 0.040, respectively). Proximity of recreational facilities (η = 0.016, P = 0.015), road/path connectivity (η = 0.025, P = 0.002), path infrastructure (η = 0.021, P = 0.005), and overall places for walking and cycling (η = 0.012, P = 0.029) scales were positively related to recreational walking. Country-specific results were mostly nonsignificant except for South Africa and Uganda. Of 14 NEWS-Africa scales, 7 were significantly related to walking behavior in pooled analyses, providing partial support for the construct validity of NEWS-Africa. However, effect sizes appeared to be lower than those from other

Construct Validity of the Neighborhood Environment Walkability Scale for Africa

Science.gov (United States)

Oyeyemi, Adewale L.; Conway, Terry L.; Adedoyin, Rufus A.; Akinroye, Kingsley K.; Aryeetey, Richmond; Assah, Felix; Cain, Kelli L.; Gavand, Kavita A.; Kasoma, Sandra S.; Kolbe-Alexander, Tracy L.; Lambert, Estelle V.; Larouche, Richard; Mos, Sarah J.; Ocansey, Reginald; Onywera, Vincent O.; Prista, Antonio; Tremblay, Mark S.; Sallis, James F.

2016-01-01

Purpose Development of valid measures of built environments relevant for physical activity is an important step toward controlling the global epidemic of physical inactivity-related noncommunicable diseases and deaths. This study assessed the construct validity of a self-report neighborhood environment walkability scale adapted for Africa (NEWS-Africa), by examining relationships with self-reported walking for transportation and recreation using pooled data from six sub-Saharan African countries. Methods NEWS was systematically adapted to assess urban, peri-urban and rural environments in sub-Saharan Africa. Adults (n=469, 18-85 years, 49.7% women) from Cameroon, Ghana, Mozambique, Nigeria, South Africa and Uganda were purposively recruited from neighborhoods varying in walkability and socioeconomic status, with some from villages. Participants completed the 76-item (13 subscales) NEWS-Africa by structured interview and reported weekly minutes of walking for transport and recreation using items from the International Physical Activity Questionnaire. Results The overall ‘walkability’ index had a positive relationship with both walking for transportation (eta2=0.020, p=0.005) and recreation (eta2=0.013, p=0.028) in the pooled analyses. The mixed-use access and stranger-danger scales were positively related with transport walking (eta2=0.020, p=0.006 and eta2=0.021, p=0.040, respectively). Proximity of recreational facilities (eta2=0.016, p=0.015), road/path connectivity (eta2=0.025, p=0.002), path infrastructure (eta2=0.021, p=0.005), and overall places for walking and cycling (eta2=0.012, p=0.029) scales were positively related to recreational walking. Country-specific results were mostly non-significant except for South Africa and Uganda. Conclusions Seven of 14 NEWS-Africa scales were significantly related to walking behavior in pooled analyses, providing partial support for the construct validity of NEWS-Africa. However, effect sizes appeared to be lower than

The Influence of an Information Environment on Construction Organization's Culture: A Case Study

OpenAIRE

Kenneth T. Sullivan; Dean T. Kashiwagi; Nathan Chong

2009-01-01

Construction professionals have identified public contract law and bureaucratic procurement/contract offices as a source of problems in the construction industry. The culture within the United State's Federal Government Acquisitions is based on the Federal Acquisition Regulations (FARs) and its interpretation, often placing organizations/agencies in the price-based environment and continuously resulting in poor performance. The United States Army Medical Command (MEDCOM) (approximately $100 M...

Power plant construction contracting in a changing regulatory environment

International Nuclear Information System (INIS)

Person, J.C.

1993-01-01

The 1965 blackout in the Northeast provided the wake-up call that spawned in unprecedented program of power plant construction by electric utilities. This building program began in the late 1960s and continued unabated through the 1970s. Beginning in the late 1970s, state regulators began in era of 'prudence' reviews which disallowed as imprudent significant portions of the costs of certain nuclear units being brought on line at the time. This regulatory experience brought about a fundamental change in the way in which utilities evaluated the need for additional capacity. This paper explores construction contracting trends in light of recent developments in the relationship between the electric utility and the state regulator. It is within this context that the utility decides: (1) whether to build, buy, or save; and (2) if the decision is to build, which project planning and administration considerations will maximize the utility's ability to incorporate project costs into the ratebase. In order to put these issues into their proper perspective, this paper first presents a brief overview of the prudence decisions of the past, and the chilling effect of these decisions generally on new project planning. The paper next focuses on the recent changes to the post-construction prudence review model, including the introduction of pre-approval arrangements and rolling prudence reviews. Following that will be a survey of new construction spending decisions in light of these changes. After an analysis of the bases for the prudence disallowances of the past and the application of the lessons learned from these disallowances to contract planning and administration issues of today, the paper will close with a discussion of the relative advantages and disadvantages of the most commonly used contract delivery methods in today's regulatory environment

Interactive mechanism of working environments and construction behaviors with cognitive work analysis: an elevator installation case study.

Science.gov (United States)

Wang, Yanqing; Chong, Heap-Yih; Liao, Pin-Chao; Ren, Hantao

2017-09-25

Unsafe behavior is a leading factor in accidents, and the working environment significantly affects behaviors. However, few studies have focused on detailed mechanisms for addressing unsafe behaviors resulting from environmental constraints. This study aims to delineate these mechanisms using cognitive work analysis (CWA) for an elevator installation case study. Elevator installation was selected for study because it involves operations at heights: falls from heights remain a major cause of construction worker mortality. This study adopts a mixed research approach based on three research methodology stages. This research deconstructs the details of the working environment, the workers' decision-making processes, the strategies chosen given environmental conditions and the conceptual model for workers' behaviors, which jointly depict environment-behavior mechanisms at length. By applying CWA to the construction industry, environmental constraints can easily be identified, and targeted engineering suggestions can be generated.

Construction of a thesaurus prototype concerning energy and environment by using the SBIC system; Prototipo di thesaurus per l`energia e l`ambiente tramite il sistema SBIC

Energy Technology Data Exchange (ETDEWEB)

Bordoni, L [ENEA,Centro Ricerche Casaccia, Rome (Italy). Funzione Centrale Studi; Anzaldi, C [IAC-Consiglio Nazionale delle Ricerche, Rome (Italy)

1996-09-01

This paper reports on an experiment performed by IAC-CNR (National Research Council) and ENEA (National Agency for New Technologies, Energy and the Environment) through a cooperation, about automatic thesaurus construction in the energy-environment domain. The experiment has been performed by using the SBIC system. A list of published papers referring to a complete description of this system is presented. The documents base in this project consists of 134 English abstracts furnished by ENEA. An evaluation of the results is also provided.

Construction of high-dimensional neural network potentials using environment-dependent atom pairs.

Science.gov (United States)

Jose, K V Jovan; Artrith, Nongnuch; Behler, Jörg

2012-05-21

An accurate determination of the potential energy is the crucial step in computer simulations of chemical processes, but using electronic structure methods on-the-fly in molecular dynamics (MD) is computationally too demanding for many systems. Constructing more efficient interatomic potentials becomes intricate with increasing dimensionality of the potential-energy surface (PES), and for numerous systems the accuracy that can be achieved is still not satisfying and far from the reliability of first-principles calculations. Feed-forward neural networks (NNs) have a very flexible functional form, and in recent years they have been shown to be an accurate tool to construct efficient PESs. High-dimensional NN potentials based on environment-dependent atomic energy contributions have been presented for a number of materials. Still, these potentials may be improved by a more detailed structural description, e.g., in form of atom pairs, which directly reflect the atomic interactions and take the chemical environment into account. We present an implementation of an NN method based on atom pairs, and its accuracy and performance are compared to the atom-based NN approach using two very different systems, the methanol molecule and metallic copper. We find that both types of NN potentials provide an excellent description of both PESs, with the pair-based method yielding a slightly higher accuracy making it a competitive alternative for addressing complex systems in MD simulations.

Environmental damages of forest road construction by bulldozer on ...

African Journals Online (AJOL)

STORAGESEVER

2009-09-15

Sep 15, 2009 ... In this study, forest road construction technique by using bulldozer was investigated in forested lands ... example, sediment yield delivered from forest roads to ... minimize the erosional impact of roads on the environ- ... 951 mm. 4570 kg. Figure 2. Proportion of environmental damages on road cross section.

Design, construction, and validation of a scale to measure cyberbullying in a work environment

Directory of Open Access Journals (Sweden)

Luz N. Fernández-López

2018-04-01

Full Text Available The objective of this study was to design, construct, and validate a scale to measure cyberbullying in a work environment. The design used was quantitative, not experimental, and transversal. The research method was based on the Reactive Response Theory. This research produced a validated scale with a sample of the work environment in Puerto Rico. Three analyses were performed: content validity, reliability analysis of the Cronbach alpha coefficient, and the divergent type construct validity. Based on the analysis of the results, the scale was deemed to be useful for the purpose it was designed. Building a scale that measures cyberbullying contributes to the design of new instruments and the revision of existing ones; furthermore, it may serve as the basis for future re- search related to the topic of cyberbullying.

Graduate Students' Knowledge Construction and Attitudes toward Online Synchronous Videoconferencing Collaborative Learning Environments

Science.gov (United States)

Akarasriworn, Chatchada; Ku, Heng-Yu

2013-01-01

This study investigated 28 graduate students' knowledge construction and attitudes toward online synchronous videoconferencing collaborative learning environments. These students took an online course, self-selected 3 or 4 group members to form groups, and worked on projects across 16 weeks. Each group utilized Elluminate "Live!" for the…

Nursing professional practice environments: setting the stage for constructive conflict resolution and work effectiveness.

Science.gov (United States)

Siu, Heidi; Spence Laschinger, Heather K; Finegan, Joan

2008-05-01

The aim of this study was to examine the impact of nurses' perceived professional practice environment on their quality of nursing conflict management approaches and ultimately their perceptions of unit effectiveness from the perspective of Deutsch's theory of constructive conflict management. Rising reports of hostility and conflict among Canadian nurses are a concern to nurses' health and the viability of effective patient care delivery. However, research on the situational factors that influence nurses' ability to apply effective conflict resolution skills that lead to positive results in practice is limited. A nonexperimental, predictive design was used in a sample of 678 registered nurses working in community hospitals within a large metropolitan area in Ontario. The results supported a modified version of the hypothesized model [chi2(1) = 16.25, Goodness of Fit = 0.99, Comparative Fit Index = 0.98, Root-Mean-Square Error of Approximation = 0.15] linking professional practice environment and core self-evaluation to nurses' conflict management and, ultimately, unit effectiveness. Professional practice environment, conflict management, and core-self evaluation explained approximately 46.6% of the variance in unit effectiveness. Positive professional practice environments and high core self-evaluations predicted nurses' constructive conflict management and, in turn, greater unit effectiveness.

Quantum Computing in Decoherence-Free Subspace Constructed by Triangulation

OpenAIRE

Bi, Qiao; Guo, Liu; Ruda, H. E.

2010-01-01

A formalism for quantum computing in decoherence-free subspaces is presented. The constructed subspaces are partial triangulated to an index related to environment. The quantum states in the subspaces are just projected states which are ruled by a subdynamic kinetic equation. These projected states can be used to perform ideal quantum logical operations without decoherence.

Quantum Computing in Decoherence-Free Subspace Constructed by Triangulation

Directory of Open Access Journals (Sweden)

Qiao Bi

2010-01-01

Full Text Available A formalism for quantum computing in decoherence-free subspaces is presented. The constructed subspaces are partial triangulated to an index related to environment. The quantum states in the subspaces are just projected states which are ruled by a subdynamic kinetic equation. These projected states can be used to perform ideal quantum logical operations without decoherence.

Why developmental niche construction is not selective niche construction: and why it matters.

Science.gov (United States)

Stotz, Karola

2017-10-06

In the last decade, niche construction has been heralded as the neglected process in evolution. But niche construction is just one way in which the organism's interaction with and construction of the environment can have potential evolutionary significance. The constructed environment does not just select for , it also produces new variation. Nearly 3 decades ago, and in parallel with Odling-Smee's article 'Niche-constructing phenotypes', West and King introduced the 'ontogenetic niche' to give the phenomena of exo genetic inheritance a formal name. Since then, a range of fields in the life sciences and medicine has amassed evidence that parents influence their offspring by means other than DNA (parental effects), and proposed mechanisms for how heritable variation can be environmentally induced and developmentally regulated. The concept of 'developmental niche construction' (DNC) elucidates how a diverse range of mechanisms contributes to the transgenerational transfer of developmental resources. My most central of claims is that whereas the selective niche of niche construction theory is primarily used to explain the active role of the organism in its selective environment, DNC is meant to indicate the active role of the organism in its developmental environment. The paper highlights the differences between the construction of the selective and the developmental niche, and explores the overall significance of DNC for evolutionary theory.

Environment of sustainable job in construction: the interface risk and right to health

Directory of Open Access Journals (Sweden)

Nilton Cesar Flores

2016-04-01

Full Text Available This study analyzes the right to health in the middle of construction work environment, through risk perspective, prevention, sustainability and public policy, with an emphasis on activity that exposes the worker to solar radiation and, therefore, implies a means not sustainable environment. The analysis will focus on the environmental risk arising from exposure to radiation and its legal effects. In this context of risk, prevention is essential to the realization of the right to health in the workplace, and the extension of the right to health is the result of a constitutional reading for a sustainable environment, particularly from the art. 196 and art. 7, item XXII, which refers to prevention in the working environment. In this context, public policies show up as a guarantor instrument of disease prevention and the implementation of the right to health in the workplace. For this study, we use the theory of social systems as a theoretical framework

Constructing and Screening a Metagenomic Library of a Cold and Alkaline Extreme Environment.

Science.gov (United States)

Glaring, Mikkel A; Vester, Jan K; Stougaard, Peter

2017-01-01

Natural cold or alkaline environments are common on Earth. A rare combination of these two extremes is found in the permanently cold (less than 6 °C) and alkaline (pH above 10) ikaite columns in the Ikka Fjord in Southern Greenland. Bioprospecting efforts have established the ikaite columns as a source of bacteria and enzymes adapted to these conditions. They have also highlighted the limitations of cultivation-based methods in this extreme environment and metagenomic approaches may provide access to novel extremophilic enzymes from the uncultured majority of bacteria. Here, we describe the construction and screening of a metagenomic library of the prokaryotic community inhabiting the ikaite columns.

Analysis of Patterns of Interaction and Knowledge Construction in On-Line Learning Environments: A Methodological Strategy

Directory of Open Access Journals (Sweden)

Benilde García Cabrero

2008-05-01

Full Text Available A model of analysis of interaction and construction of knowledge in educational environments based on computer-mediated communication (CMC is proposed. This proposal considers: 1 the contextual factors that constitute the input and the scenario of interaction, 2 the interaction processes: types of interaction and its contents (Garrison, Anderson and Archer, 2000 as well as the discursive strategies (Lemke, 1997, and 3 learning results that involve the quality of the knowledge constructed by the participants (Gunawardena, Lowe and Anderson, 1997. This model was applied to the analysis of the interaction among a group of participants in two web forums (with or without the presence of a teacher, during the teaching of a PhD in Psychology program. The results show evidence of the model’s viability to describe the patterns of interaction and the levels of construction of knowledge in web forums.

The construction of work-life balance: the experience of black employees in a call-centre environment

OpenAIRE

Potgieter, Sónia C.B.; Barnard, Antoni

2010-01-01

ORIENTATION: Work-life balance, as a crucial aspect of employee and organisational wellness, remains an interesting field of research, especially due to the changing demographic employee profile. RESEARCH PURPOSE: The objective of the study was to explore Black employees' construction of work-life balance in a customer care environment. MOTIVATION FOR THE STUDY: The conceptual debate regarding the construct of work-life balance in general as well as limited qualitative research with regard to...

Construction of the quantitative analysis environment using Monte Carlo simulation

International Nuclear Information System (INIS)

Shirakawa, Seiji; Ushiroda, Tomoya; Hashimoto, Hiroshi; Tadokoro, Masanori; Uno, Masaki; Tsujimoto, Masakazu; Ishiguro, Masanobu; Toyama, Hiroshi

2013-01-01

The thoracic phantom image was acquisitioned of the axial section to construct maps of the source and density with Monte Carlo (MC) simulation. The phantom was Heart/Liver Type HL (Kyoto Kagaku Co., Ltd.) single photon emission CT (SPECT)/CT machine was Symbia T6 (Siemence) with the collimator LMEGP (low-medium energy general purpose). Maps were constructed from CT images with an in-house software using Visual studio C Sharp (Microsoft). The code simulation of imaging nuclear detectors (SIMIND) was used for MC simulation, Prominence processor (Nihon Medi-Physics) for filter processing and image reconstruction, and the environment DELL Precision T7400 for all image processes. For the actual experiment, the phantom was given 15 MBq of 99m Tc assuming the uptake 2% at the dose of 740 MBq in its myocardial portion and SPECT image was acquisitioned and reconstructed with Butter-worth filter and filter back projection method. CT images were similarly obtained in 0.3 mm thick slices, which were filed in one formatted with digital imaging and communication in medicine (DICOM), and then processed for application to SIMIND for mapping the source and density. Physical and mensuration factors were examined in ideal images by sequential exclusion and simulation of those factors as attenuation, scattering, spatial resolution deterioration and statistical fluctuation. Gamma energy spectrum, SPECT projection and reconstructed images given by the simulation were found to well agree with the actual data, and the precision of MC simulation was confirmed. Physical and mensuration factors were found to be evaluable individually, suggesting the usefulness of the simulation for assessing the precision of their correction. (T.T.)

Constructing a modern city machine

DEFF Research Database (Denmark)

Lindegaard, Hanne; Jørgensen, Ulrik

1998-01-01

Based on the Copenhagen sewers debates and constructions the role of changing perceptions of water, hygiene and environment is discussed in relation to the modernisation of cities by machinating flows and infrastructures.......Based on the Copenhagen sewers debates and constructions the role of changing perceptions of water, hygiene and environment is discussed in relation to the modernisation of cities by machinating flows and infrastructures....

An e-Learning environment for algorithmic: toward an active construction of skills

Directory of Open Access Journals (Sweden)

Abdelghani Babori

2016-07-01

Full Text Available Assimilating an algorithmic course is a persistent problem for many undergraduate students. The major problem faced by students is the lack of problem solving ability and flexibility. Therefore, students are generally passive, unmotivated and unable to mobilize all the acquired knowledge (loops, test, variables, etc. to deal with new encountered problems. Our study is structured around building, step by step, problem solving skills among novice learners. Our approach is based on the use of problem based learning in an e-Learning environment. We begin by establishing a cognitive model which represents knowledge elements, grouped into categories of skills, judged necessary to be appropriated. We then propose a problem built on a concrete situation which aims to actively construct a skill category. We conclude by presenting around the proposed problem a pedagogical scenario for the set of learning activities designed to be incorporated in an E-learning platform.

The implementation of clean development mechanism (CDM) in the construction and built environment industry

International Nuclear Information System (INIS)

Mok, Ken L.; Han, Seung H.; Choi, Seokjin

2014-01-01

Greenhouse gas emissions due to human activities are the main contributors to global climate change, a problem that should not be ignored. Through the clean development mechanism (CDM) introduced under the Kyoto Protocol, developing countries are able to earn certified emission reduction (CER) credits through a myriad of emission reduction projects. This study aims to explore the potential of implementing CDM projects in the construction and built environment (C and BE) industry, which has been criticized for not only consuming an enormous amount of resources, but also for contributing to adverse environmental health. In this research, we limit the boundary of the C and BE industry to include the planning, procurement, construction, occupation and refurbishment/demolition phases of a project's life cycle. Surveys and in-depth follow-up interviews with experts have generated useful insights pertaining to CDM potential and its adaptation into the C and BE industry. From this foundation, this paper evaluates the current obstacles to CDM and presents feasible suggestions to increase CDM projects related to the C and BE industry. - Highlights: • We review the development and limitation of CDM relates to the construction and built environment (C and BE) industry. • We obtain experts' opinions on the feasibility of CDM in the C and BE industry. • Validation, monitoring, verification and additionality of CDM projects are crucial. • Experts agreed that most of our suggestions are feasible in principle

Characterization of materials formed by rice husk for construction

International Nuclear Information System (INIS)

Portillo-Rodríguez, A M

2013-01-01

This review article delves into the use of agro-industrial wastes, which in construction field provides alternatives for environmental problems with the use of them. This fact enables development and lower costs for new options in the brick, cluster, mortar and concrete industry, what represents benefits for environment, housing and generally everything related to construction, looking for sustainability. For that reason a literature review is made to support the theme focusing on the use of rice husk in its natural, ground or ash state for manufacturing elements with clay masonry, precast and optimization of concrete and mortars. The technique used is based on scientific articles and researches found in reliable databases that were analyzed and integrated into a synthesized structure, which summarized the objectives, analysis processes, the physical and mechanical properties and finally the results. The conclusions are focused on potentiality of elements production in the construction development based on the high effectiveness like thermal insulation, low density and various benefits offered by high silica content pozzolanic properties, etc

Characterization of materials formed by rice husk for construction

Science.gov (United States)

Portillo-Rodríguez, A. M.

2013-11-01

This review article delves into the use of agro-industrial wastes, which in construction field provides alternatives for environmental problems with the use of them. This fact enables development and lower costs for new options in the brick, cluster, mortar and concrete industry, what represents benefits for environment, housing and generally everything related to construction, looking for sustainability. For that reason a literature review is made to support the theme focusing on the use of rice husk in its natural, ground or ash state for manufacturing elements with clay masonry, precast and optimization of concrete and mortars. The technique used is based on scientific articles and researches found in reliable databases that were analyzed and integrated into a synthesized structure, which summarized the objectives, analysis processes, the physical and mechanical properties and finally the results. The conclusions are focused on potentiality of elements production in the construction development based on the high effectiveness like thermal insulation, low density and various benefits offered by high silica content pozzolanic properties, etc.

Assessing the sustainable construction of large construction companies in Malaysia

Science.gov (United States)

Adewale, Bamgbade Jibril; Mohammed, Kamaruddeen Ahmed; Nasrun, Mohd Nawi Mohd

2016-08-01

Considering the increasing concerns for the consideration of sustainability issues in construction project delivery within the construction industry, this paper assesses the extent of sustainable construction among Malaysian large contractors, in order to ascertain the level of the industry's impacts on both the environment and the society. Sustainable construction explains the construction industry's responsibility to efficiently utilise the finite resources while also reducing construction impacts on both humans and the environment throughout the phases of construction. This study used proportionate stratified random sampling to conduct a field study with a sample of 172 contractors out of the 708 administered questionnaires. Data were collected from large contractors in the eleven states of peninsular Malaysia. Using the five-level rating scale (which include: 1= Very Low; 2= Low; 3= Moderate; 4= High; 5= Very High) to describe the level of sustainable construction of Malaysian contractors based on previous studies, statistical analysis reveals that environmental, social and economic sustainability of Malaysian large contractors are high.

Beyond Design: The Importance of Construction and Post-Construction Phases in Green Developments

Directory of Open Access Journals (Sweden)

Mark Hostetler

2010-04-01

Full Text Available Green developments are becoming a popular land use planning concept that attempts to accommodate growth while minimizing impacts on natural resources. Various policies encourage conservation designs that usually translate into the clustering of homes and the conservation of some percentage of open space. However, the success of a design is determined by what happens during the construction and post-construction phases of a subdivision project. These two phases are often ignored in land use planning and given only minimal attention by built environment professionals. As a result, green developments may not be functioning as originally intended. This essay discusses the importance of construction and post-construction and a way forward to create functional, sustainable communities. Construction activities and decisions, such as impacts from earthwork machines, improper protection of conserved open spaces and trees, the choice of plants used for yards and common areas, and the storage of construction material all can lead to severe impacts on natural areas both within and surrounding a development site. During post-construction, a variety of improper management practices by homeowners can compromise the sustainability of a development. Developers and associated environmental consultant teams could implement approaches that would engage contractors and residents, such as environmental construction covenants and the installment of a neighborhood, environmental education program. To increase the adoption of relevant construction and post-construction practices, appropriate policies need to be created. However, the shift will only occur once the planning and built environment community acknowledges that design is only the first step towards sustainability. Academic design studios and continuing education courses can help with this culture shift by including construction and post-construction considerations within their curriculum.

Veterinary students' perceptions of their learning environment as measured by the Dundee Ready Education Environment Measure.

Science.gov (United States)

Pelzer, Jacquelyn M; Hodgson, Jennifer L; Werre, Stephen R

2014-03-24

The Dundee Ready Education Environment Measure (DREEM) has been widely used to evaluate the learning environment within health sciences education, however, this tool has not been applied in veterinary medical education. The aim of this study was to evaluate the reliability and validity of the DREEM tool in a veterinary medical program and to determine veterinary students' perceptions of their learning environment. The DREEM is a survey tool which quantitatively measures students' perceptions of their learning environment. The survey consists of 50 items, each scored 0-4 on a Likert Scale. The 50 items are subsequently analysed within five subscales related to students' perceptions of learning, faculty (teachers), academic atmosphere, and self-perceptions (academic and social). An overall score is obtained by summing the mean score for each subscale, with an overall possible score of 200. All students in the program were asked to complete the DREEM. Means and standard deviations were calculated for the 50 items, the five subscale scores and the overall score. Cronbach's alpha was determined for the five subscales and overall score to evaluate reliability. Confirmatory factor analysis was used to evaluate construct validity. 224 responses (53%) were received. The Cronbach's alpha for the overall score was 0.93 and for the five subscales were; perceptions of learning 0.85, perceptions of faculty 0.79, perceptions of atmosphere 0.81, academic self-perceptions 0.68, and social self-perceptions 0.72. Construct validity was determined to be acceptable (p education programs. Four individual items of concern were identified by students. In this setting the DREEM was a reliable and valid tool to measure veterinary students' perceptions of their learning environment. The four items identified as concerning originated from four of the five subscales, but all related to workload. Negative perceptions regarding workload is a common concern of students in health education

Linking response strategies adopted by construction firms during the 2007 economic recession to Porter’s generic strategies

OpenAIRE

Tansey, Paul; Spillane, John P.; Meng, Xianhai

2014-01-01

The time period bridging the years 2007 to 2012 will be remembered as one characterised by dramatic changes in the Irish and UK construction industries. Construction companies witnessed unprecedented changes in the environment, namely the coincidence of a sharp economic downturn, the significant decline of public works, a reduction in lending, increased competition, and structural changes in the marketplace. Nevertheless, little has been documented on what response strategies construction com...

The construction of work–life balance: The experience of Black employees in a call-centre environment

Directory of Open Access Journals (Sweden)

Sonia C.B. Potgieter

2010-08-01

Research purpose: The objective of the study was to explore Black employees’ construction of work–life balance in a customer care environment. Motivation for the study: The conceptual debate regarding the construct of work–life balance in general as well as limited qualitative research with regard to Black employees’ experience of work–life balance in a South African context motivated the study. Research design, approach and method: This qualitative study was designed from an interpretivist perspective. Ten employees, selected through purposeful sampling, participated in the study. Data was gathered through in-depth interviews and grounded theory was applied during data analysis. Main findings: The grounded theory analysis of the data yielded six themes central to participants’ construction of work–life balance. The findings suggest that work–life balance is conceptualised as a continuous, subjective and holistic valuation of satisfaction derived from multiple roles in relation to the importance to the individual at a given point in time. Practical/managerial implications: Findings provide valuable managerial information to guide suitable strategies enhancing the work–life balance experience and by implication employees’ general wellbeing, job satisfaction and commitment. Contributions/value-add: This study contributes to the evolving body of knowledge with regard to work–life balance and provides a unique context-specific perspective to the conceptual understanding of the construct.

The Development of a Design and Construction Process Protocol to Support the Home Modification Process Delivered by Occupational Therapists.

Science.gov (United States)

Russell, Rachel; Ormerod, Marcus; Newton, Rita

2018-01-01

Modifying the home environments of older people as they age in place is a well-established health and social care intervention. Using design and construction methods to redress any imbalance caused by the ageing process or disability within the home environment, occupational therapists are seen as the experts in this field of practice. However, the process used by occupational therapists when modifying home environments has been criticised for being disorganised and not founded on theoretical principles and concepts underpinning the profession. To address this issue, research was conducted to develop a design and construction process protocol specifically for home modifications. A three-stage approach was taken for the analysis of qualitative data generated from an online survey, completed by 135 occupational therapists in the UK. Using both the existing occupational therapy intervention process model and the design and construction process protocol as the theoretical frameworks, a 4-phase, 9-subphase design and construction process protocol for home modifications was developed. Overall, the study is innovative in developing the first process protocol for home modifications, potentially providing occupational therapists with a systematic and effective approach to the design and delivery of home modification services for older and disabled people.

The networked student: A design-based research case study of student constructed personal learning environments in a middle school science course

Science.gov (United States)

Drexler, Wendy

This design-based research case study applied a networked learning approach to a seventh grade science class at a public school in the southeastern United States. Students adapted emerging Web applications to construct personal learning environments for in-depth scientific inquiry of poisonous and venomous life forms. The personal learning environments constructed used Application Programming Interface (API) widgets to access, organize, and synthesize content from a number of educational Internet resources and social network connections. This study examined the nature of personal learning environments; the processes students go through during construction, and patterns that emerged. The project was documented from both an instructional and student-design perspective. Findings revealed that students applied the processes of: practicing digital responsibility; practicing digital literacy; organizing content; collaborating and socializing; and synthesizing and creating. These processes informed a model of the networked student that will serve as a framework for future instructional designs. A networked learning approach that incorporates these processes into future designs has implications for student learning, teacher roles, professional development, administrative policies, and delivery. This work is significant in that it shifts the focus from technology innovations based on tools to student empowerment based on the processes required to support learning. It affirms the need for greater attention to digital literacy and responsibility in K12 schools as well as consideration for those skills students will need to achieve success in the 21st century. The design-based research case study provides a set of design principles for teachers to follow when facilitating student construction of personal learning environments.

The communication in industrialised building system (IBS) construction project: Virtual environment

Science.gov (United States)

Pozin, Mohd Affendi Ahmad; Nawi, Mohd Nasrun Mohd

2017-10-01

Large portion of numbers team organization in the IBS construction sector is known are being fragmented. That is contributed from a segregation of construction activity thus create team working in virtually. Virtual team are the nature when teams are working in distributed area, across culture and time. Therefore, teams can be respond to the task without relocating to the site project and settle down a problem through information and communication technology (ICT). The emergence of virtual team are carry out by advancements in communication technologies as a medium to improve project team communication in project delivery process on IBS construction. Based on literature review from previous study and data collected from interviewing, this paper aim to identified communication challenges among project team members according to current project development practices in IBS construction project. Hence, in attempt to develop effective communication through the advantages of virtual team approach for IBS construction project. In order to ensure the data is gathered comprehensively and accurately, the data was collected from project managers by using semi structured interview method. It was found that virtual team approach could be enable competitive challenges on complexity in the construction project management process.

THE IMPACT OF CONSTRUCTION AND GENTRIFICATION ON AN OUTDOOR TRANS SEX WORK ENVIRONMENT: VIOLENCE, DISPLACEMENT AND POLICING.

Science.gov (United States)

Lyons, Tara; Krüsi, Andrea; Pierre, Leslie; Small, Will; Shannon, Kate

2017-12-01

The objective of this study was to investigate how environmental and structural changes to a trans outdoor work environment impacted sex workers in Vancouver, Canada. The issue of changes to the work area arose during qualitative interviews with 33 trans sex workers. In response, ethnographic walks that incorporated photography were undertaken with trans sex workers. Changes to the work environment were found to increase vulnerabilities to client violence, displace trans sex workers, and affect policing practices. Within a criminalized context, construction and gentrification enhanced vulnerabilities to violence and harassment from police and residents.

The construction of work–life balance: The experience of Black employees in a call-centre environment

Directory of Open Access Journals (Sweden)

Sonia C.B. Potgieter

2010-03-01

Full Text Available Orientation: Work–life balance, as a crucial aspect of employee and organisational wellness, remains an interesting field of research, especially due to the changing demographic employee profile.Research purpose: The objective of the study was to explore Black employees’ construction of work–life balance in a customer care environment.Motivation for the study: The conceptual debate regarding the construct of work–life balance in general as well as limited qualitative research with regard to Black employees’ experience of work–life balance in a South African context motivated the study.Research design, approach and method: This qualitative study was designed from an interpretivist perspective. Ten employees, selected through purposeful sampling, participated in the study. Data was gathered through in-depth interviews and grounded theory was applied during data analysis.Main findings: The grounded theory analysis of the data yielded six themes central to participants’ construction of work–life balance. The findings suggest that work–life balance is conceptualised as a continuous, subjective and holistic valuation of satisfaction derived from multiple roles in relation to the importance to the individual at a given point in time.Practical/managerial implications: Findings provide valuable managerial information to guide suitable strategies enhancing the work–life balance experience and by implication employees’ general wellbeing, job satisfaction and commitment.Contributions/value-add: This study contributes to the evolving body of knowledge with regard to work–life balance and provides a unique context-specific perspective to the conceptual understanding of the construct.

The Development of a Design and Construction Process Protocol to Support the Home Modification Process Delivered by Occupational Therapists

Directory of Open Access Journals (Sweden)

Rachel Russell

2018-01-01

Full Text Available Modifying the home environments of older people as they age in place is a well-established health and social care intervention. Using design and construction methods to redress any imbalance caused by the ageing process or disability within the home environment, occupational therapists are seen as the experts in this field of practice. However, the process used by occupational therapists when modifying home environments has been criticised for being disorganised and not founded on theoretical principles and concepts underpinning the profession. To address this issue, research was conducted to develop a design and construction process protocol specifically for home modifications. A three-stage approach was taken for the analysis of qualitative data generated from an online survey, completed by 135 occupational therapists in the UK. Using both the existing occupational therapy intervention process model and the design and construction process protocol as the theoretical frameworks, a 4-phase, 9-subphase design and construction process protocol for home modifications was developed. Overall, the study is innovative in developing the first process protocol for home modifications, potentially providing occupational therapists with a systematic and effective approach to the design and delivery of home modification services for older and disabled people.

Automatic Construction by Contour Crafting Technology

Directory of Open Access Journals (Sweden)

Mohammad Reza Khorramshahi

2017-07-01

Full Text Available Contour Crafting is a novel technology in construction industry based on 3D printing that uses robotics to construct free form building structures by repeatedly laying down layers of material such as concrete. It is actually an approach to scale up automatic fabrication from building small industrial parts to constructing buildings. However, there are little information about contour crafting (CC in current use; present paper aims to describe the operational steps of creating a whole building by the machine reviewing relevant literature. Furthermore, it will represent the advantages of CC usage compared to traditional construction methods, as well as its applicability in construction industry.

Evaluation of the growth environment of a hydrostatic force bioreactor for preconditioning of tissue-engineered constructs.

Science.gov (United States)

Reinwald, Yvonne; Leonard, Katherine H L; Henstock, James R; Whiteley, Jonathan P; Osborne, James M; Waters, Sarah L; Levesque, Philippe; El Haj, Alicia J

2015-01-01

Bioreactors have been widely acknowledged as valuable tools to provide a growth environment for engineering tissues and to investigate the effect of physical forces on cells and cell-scaffold constructs. However, evaluation of the bioreactor environment during culture is critical to defining outcomes. In this study, the performance of a hydrostatic force bioreactor was examined by experimental measurements of changes in dissolved oxygen (O2), carbon dioxide (CO2), and pH after mechanical stimulation and the determination of physical forces (pressure and stress) in the bioreactor through mathematical modeling and numerical simulation. To determine the effect of hydrostatic pressure on bone formation, chick femur skeletal cell-seeded hydrogels were subjected to cyclic hydrostatic pressure at 0-270 kPa and 1 Hz for 1 h daily (5 days per week) over a period of 14 days. At the start of mechanical stimulation, dissolved O2 and CO2 in the medium increased and the pH of the medium decreased, but remained within human physiological ranges. Changes in physiological parameters (O2, CO2, and pH) were reversible when medium samples were placed in a standard cell culture incubator. In addition, computational modeling showed that the distribution and magnitude of physical forces depends on the shape and position of the cell-hydrogel constructs in the tissue culture format. Finally, hydrostatic pressure was seen to enhance mineralization of chick femur skeletal cell-seeded hydrogels.

APPLICATION OF KATG::LUX GENE CONSTRUCT FOR CYTOTOXICITY AND GENOTOXICITY MONITORING OF METOPROLOL IN ENVIRONMENT

Directory of Open Access Journals (Sweden)

Eliza Hawrylik

2017-06-01

Full Text Available The aim of the study was the evaluation of usefulness of Escherichia coli K-12 RFM 443 katG::lux for cytotoxicity and genotoxicity monitoring of metoprolol in the environment. Metoprolol is one of the most popular cardiac drug which belongs to the group of β – blockers. The drug was applied at concentrations ranging from 10-1 mg/cm3 to 10-5 mg/cm3. Obtained data indicated the influence of metoprolol on lux gene expression and katG promotor activity in E.coli K-12. The results indicato the possibility of using of Escherichia coli K-12 RFM 443 strain with katG::lux gene construct in the monitoring of cytotoxicity and genotoxicity cardiac drug residues in the environment.

COUNTERBALANCING BENEFITS AND DRAWBACKS OF CONTEMPORARY STABLISED EARTH CONSTRUCTION BY CONSTRUCTION PROFESSIONALS

Directory of Open Access Journals (Sweden)

Mohammad Sharif Zami

2011-07-01

Full Text Available It is debatable among the construction professionals whether contemporary stabilised earth construction is beneficial in urban low cost housing. Existing literature recorded a lot of benefits and drawbacks from construction professionals, which is empirically substantiated. But there are drawbacks found in the literature that seemingly are conflicting, and construction professionals are divided in their opinion. This paper seeks to address these conflicts and division by validating the controversial drawbacks of contemporary stabilised earth construction in urban low cost housing.

The Perennial Environment Observatory by A.N.D.R.A. (the French National Radioactive Waste Management Agency)

International Nuclear Information System (INIS)

Leclerc, E.

2010-01-01

The Perennial Environment Observatory [Observatoire Perenne de l'Environnement - OPE] is a unique approach and infrastructure developed and implemented by ANDRA, the French National Radioactive Waste Management Agency, as part of its overall project of deep geological disposal for radioactive waste. Its current mission is to assess the initial state of the rural (forest, pasture, open-field and aquatic) environment, prior to repository construction. This will be followed in 2017 (pending construction authorizations) and for a period exceeding a century, by monitoring of any impact the repository may have on the environment. In addition to serving its own industrial purpose of environmental monitoring, ANDRA also opens the OPE approach, infrastructure and acquired knowledge (database...) to the scientific community to support further research on long term evolution of the environment subjected to natural and anthropogenic stresses, and to contribute to a better understanding of the interaction between the various compartments of the environment. (author)

Perennial Environment Observatory

International Nuclear Information System (INIS)

Plas, Frederic

2014-07-01

The Perennial Environment Observatory [Observatoire Perenne de l'Environnement - OPE] is a unique approach and infrastructure developed and implemented by ANDRA, the French National Radioactive Waste Management Agency, as part of its overall project of deep geological disposal for radioactive waste. Its current mission is to assess the initial state of the rural (forest, pasture, open-field and aquatic) environment, prior to repository construction. This will be followed in 2017 (pending construction authorizations) and for a period exceeding a century, by monitoring of any impact the repository may have on the environment. In addition to serving its own industrial purpose of environmental monitoring, ANDRA also opens the OPE approach, infrastructure and acquired knowledge (database...) to the scientific community to support further research on long term evolution of the environment subjected to natural and anthropogenic stresses, and to contribute to a better understanding of the interaction between the various compartments of the environment

Construction Cost Management in Resource Based Economy

OpenAIRE

Elazzazy, Muhammad

2017-01-01

Resource Based Economy tested according to criteria formulated from the construction cost management best practices. A cost management plan modeled to demonstrate the possibility of construction management under a new socio-economic system, which counts the consumed natural resources by construction as the dry cost to the environment.

Synthetic constructs in/for the environment: managing the interplay between natural and engineered Biology.

Science.gov (United States)

Schmidt, Markus; de Lorenzo, Víctor

2012-07-16

The plausible release of deeply engineered or even entirely synthetic/artificial microorganisms raises the issue of their intentional (e.g. bioremediation) or accidental interaction with the Environment. Containment systems designed in the 1980s-1990s for limiting the spread of genetically engineered bacteria and their recombinant traits are still applicable to contemporary Synthetic Biology constructs. Yet, the ease of DNA synthesis and the uncertainty on how non-natural properties and strains could interplay with the existing biological word poses yet again the challenge of designing safe and efficacious firewalls to curtail possible interactions. Such barriers may include xeno-nucleic acids (XNAs) instead of DNA as information-bearing molecules, rewriting the genetic code to make it non-understandable by the existing gene expression machineries, and/or making growth dependent on xenobiotic chemicals. Copyright © 2012 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

Environmental factors and human health: fibrous and particulate substance-induced immunological disorders and construction of a health-promoting living environment.

Science.gov (United States)

Otsuki, Takemi; Matsuzaki, Hidenori; Lee, Suni; Kumagai-Takei, Naoko; Yamamoto, Shoko; Hatayama, Tamayo; Yoshitome, Kei; Nishimura, Yasumitsu

2016-03-01

Among the various scientific fields covered in the area of hygiene such as environmental medicine, epidemiology, public health and preventive medicine, we are investigating the immunological effects of fibrous and particulate substances in the environment and work surroundings, such as asbestos fibers and silica particles. In addition to these studies, we have attempted to construct health-promoting living conditions. Thus, in this review we will summarize our investigations regarding the (1) immunological effects of asbestos fibers, (2) immunological effects of silica particles, and (3) construction of a health-promoting living environment. This review article summarizes the 2014 Japanese Society for Hygiene (JSH) Award Lecture of the 85th Annual Meeting of the JSH entitled "Environmental health effects: immunological effects of fibrous and particulate matter and establishment of health-promoting environments" presented by the first author of this manuscript, Prof. Otsuki, Department of Hygiene, Kawasaki Medical School, Kurashiki, Japan, the recipient of the 2014 JSH award. The results of our experiments can be summarized as follows: (1) asbestos fibers reduce anti-tumor immunity, (2) silica particles chronically activate responder and regulatory T cells causing an unbalance of these two populations of T helper cells, which may contribute to the development of autoimmune disorders frequently complicating silicosis, and (3) living conditions to enhance natural killer cell activity were developed, which may promote the prevention of cancers and diminish symptoms of virus infections.

Monitoring and assessing the effects from Metro networks construction on the urban acoustic environment: The Athens Metro Line 3 Extension.

Science.gov (United States)

Vogiatzis, Konstantinos; Zafiropoulou, Vassiliki; Mouzakis, Haralampos

2018-10-15

The Line 3 Extension from Aghia Marina to Piraeus constitutes one of the most significant construction projects in full development in Athens Greater area. For the management and abatement of the air borne noise generated from surface, and/or underground construction activities, relevant machinery operation, and trucks movements at open worksites and the tunnel, a continuous monthly noise and vibration monitoring program is enforced in order to assess any potential intrusion of the acoustic environment. On basis of measured 24 hour L eq noise levels, both L den and L night EU indices were assessed along with vibration velocity for every worksite and tunnel construction activity. The existing environmental noise background generated mainly from road traffic was assessed in order to evaluate potential effects on both air borne noise from construction activities. This comprehensive monitoring program aims to protect the inhabitants in the vicinity of worksites and the tunnel surrounding from construction noise and vibration processing and evaluating all necessary mitigation measures. Especially, for the protection of sensitive receptors, this program may serve as a tool ensuring a successful management of both noise and vibration levels emitted from open air construction activities and (Tunnel Boring Machine) TBM or hammer/pilling operation by implementing mitigation measures where necessary. Copyright © 2018 Elsevier B.V. All rights reserved.

Sustainability Base Construction Update

Science.gov (United States)

Mewhinney, Michael

2012-01-01

Construction of the new Sustainability Base Collaborative support facility, expected to become the highest performing building in the federal government continues at NASA's Ames Research Center, Moffet Field, Calif. The new building is designed to achieve a platinum rating under the leadership in Energy and Environment Design (LEED) new construction standards for environmentally sustainable construction developed by the U. S. Green Building Council, Washington, D. C. When completed by the end of 2011, the $20.6 million building will feature near zero net energy consumption, use 90 percent less potable water than conventionally build buildings of equivalent size, and will result in reduced building maintenance costs.

Sustainable construction : towards a strategic approach to construction material management for waste reduction

NARCIS (Netherlands)

Abarca Guerrero, L.; Scheublin, F.J.M.; Egmond - de Wilde De Ligny, van E.L.C.; Lambert, A.J.D.

2008-01-01

The construction sector plays a key role in shaping and developing the built environment. It also has an undisputed and significant impact on it due to the amounts of materials extracted and produced as waste. The construction industry has emphasized to recycling construction waste (CW), however,

An introduction to niche construction theory.

Science.gov (United States)

Laland, Kevin; Matthews, Blake; Feldman, Marcus W

Niche construction refers to the modification of selective environments by organisms. Theoretical and empirical studies of niche construction are increasing in importance as foci in evolutionary ecology. This special edition presents theoretical and empirical research that illustrates the significance of niche construction to the field. Here we set the scene for the following papers by (1) discussing the history of niche construction research, (2) providing clear definitions that distinguish niche construction from related concepts such as ecosystem engineering and the extended phenotype, (3) providing a brief summary of the findings of niche construction research, (4) discussing the contribution of niche construction and ecological inheritance to (a) expanded notions of inheritance, and (b) the extended evolutionary synthesis, and (5) briefly touching on some of the issues that underlie the controversies over niche construction.

Operations management for construction

CERN Document Server

March, Chris

2009-01-01

Students studying construction management and related subjects need to have a broad understanding of the major aspects of controlling the building processes. Operations Management for Construction is one of three textbooks (Business Organisation, Operations Management and Finance Control) written to systematically cover the field. Focusing on construction sites and operations which are challenging to run, Chris March explores issues such as the setting up of the site, the deciding of the methodology of construction, and the sequence of work and resourcing. As changing and increasing regulations affect the way sites are managed, he also considers the issues and methods of successful administering, safety, quality and environment. Finally, the contractor's responsibility to the environment, including relationships with third parties, selection of materials, waste management and sustainability is discussed. Chris March has a wealth of practical experience in the construction industry, as well as considerable exp...

How Can Lean Construction Improve the Daily Schedule of A Construction Manager?

Science.gov (United States)

Binninger, Marco; Dlouhy, Janosch; Schneider, Johannes; Haghsheno, Shervin

2017-10-01

The outcome of construction projects highly depends on effective management. The site manager is responsible for the site, and has a key role in executing construction projects. Especially this position has a wide range of tasks and a high volume of workload, which has to be carried out in a high pressure and high stress environment. Chaotic construction processes often create these working conditions. Lean Construction can help to organize the construction site in a better way and automatically supports the site manager.

Sustainable construction : towards a strategic approach to construction material management for waste reduction

OpenAIRE

Abarca Guerrero, L.; Scheublin, F.J.M.; Egmond - de Wilde De Ligny, van, E.L.C.; Lambert, A.J.D.

2008-01-01

The construction sector plays a key role in shaping and developing the built environment. It also has an undisputed and significant impact on it due to the amounts of materials extracted and produced as waste. The construction industry has emphasized to recycling construction waste (CW), however, relatively less emphasis has been paid on construction waste minimization. CW reduction can be achieved through changes in design concepts, material and construction methods selection and material ma...

Construction and Evaluation of an Integrated Formal/Informal Learning Environment for Foreign Language Learning across Real and Virtual Spaces

Science.gov (United States)

Waragai, Ikumi; Ohta, Tatsuya; Kurabayashi, Shuichi; Kiyoki, Yasushi; Sato, Yukiko; Brückner, Stefan

2017-01-01

This paper presents the prototype of a foreign language learning space, based on the construction of an integrated formal/informal learning environment. Before the background of the continued innovation of information technology that places conventional learning styles and educational methods into new contexts based on new value-standards,…

Budget performance reporting and construction work packaging

International Nuclear Information System (INIS)

Strong, M.G.; Weyers, L.L.

1976-01-01

A changing financial, technological, and regulatory environment has increased the complexity, costliness, and risk involved in constructing new generating facilities. A primary challenge facing utility executives is to hold down costs on these construction projects. New construction management techniques are required to accomplish this. Commonwealth Edison has responded by implementing a new Budget Performance Reporting System and a Construction Work Packaging System. The new systems are being used successfully on four major construction projects with budgets totaling over $4 billion

Constructing a psychological coping profile in the call centre environment: Wellness-related dispositions in relation to resiliency-related behavioural capacities

Directory of Open Access Journals (Sweden)

Nisha Harry

2015-08-01

Full Text Available Orientation: The context of this research is the coping and wellness of call centre agents in a characteristically high-stress work environment. Research purpose: The purpose of the study was to construct a psychological coping profile by investigating the overall relationship between individuals’ wellness-related dispositional attributes and their resiliency-related behavioural capacities. Motivation of the study: It is important that coping in the call centre environment be understood in light of the complexity of the challenges that call centre agents experience in terms of their wellbeing. Research design, approach and method: A quantitative cross-sectional survey approach was followed, using a non-probability purposive sample (N = 409 comprising predominantly early career, permanently employed black females in call centres in Africa. Main findings: A canonical correlation analysis indicated a significant overall relationship between the wellness-related constructs (sense of coherence, emotional intelligence and burnout and the resiliency-related constructs (career adaptability and hardiness. Structural equation modelling indicated that managing own emotions and cynicism contributed significantly to explaining the participants’ resiliency-related behavioural capacities (hardicommitment and hardi-control. Practical/managerial implications: Enhancing call centre agents’ emotional intelligence and lowering cynicism will increase resiliency-related capacities, such as sense of control and commitment, and will significantly increase the resiliency and capacity of call centre agents to cope with pressure, which can lead to positive work attitudes. Contribution/value-add: The findings may provide valuable pointers for the design of wellness intervention practices and could potentially add to the body of knowledge concerned with employee wellness in call centres.

Multimode Resource-Constrained Multiple Project Scheduling Problem under Fuzzy Random Environment and Its Application to a Large Scale Hydropower Construction Project

Science.gov (United States)

Xu, Jiuping

2014-01-01

This paper presents an extension of the multimode resource-constrained project scheduling problem for a large scale construction project where multiple parallel projects and a fuzzy random environment are considered. By taking into account the most typical goals in project management, a cost/weighted makespan/quality trade-off optimization model is constructed. To deal with the uncertainties, a hybrid crisp approach is used to transform the fuzzy random parameters into fuzzy variables that are subsequently defuzzified using an expected value operator with an optimistic-pessimistic index. Then a combinatorial-priority-based hybrid particle swarm optimization algorithm is developed to solve the proposed model, where the combinatorial particle swarm optimization and priority-based particle swarm optimization are designed to assign modes to activities and to schedule activities, respectively. Finally, the results and analysis of a practical example at a large scale hydropower construction project are presented to demonstrate the practicality and efficiency of the proposed model and optimization method. PMID:24550708

Multimode resource-constrained multiple project scheduling problem under fuzzy random environment and its application to a large scale hydropower construction project.

Science.gov (United States)

Xu, Jiuping; Feng, Cuiying

2014-01-01

This paper presents an extension of the multimode resource-constrained project scheduling problem for a large scale construction project where multiple parallel projects and a fuzzy random environment are considered. By taking into account the most typical goals in project management, a cost/weighted makespan/quality trade-off optimization model is constructed. To deal with the uncertainties, a hybrid crisp approach is used to transform the fuzzy random parameters into fuzzy variables that are subsequently defuzzified using an expected value operator with an optimistic-pessimistic index. Then a combinatorial-priority-based hybrid particle swarm optimization algorithm is developed to solve the proposed model, where the combinatorial particle swarm optimization and priority-based particle swarm optimization are designed to assign modes to activities and to schedule activities, respectively. Finally, the results and analysis of a practical example at a large scale hydropower construction project are presented to demonstrate the practicality and efficiency of the proposed model and optimization method.

Current construction status of Korea Wolsong Nuclear Environment Management Center (low and intermediate level radioactive waste disposal facility)

International Nuclear Information System (INIS)

Suzuki, Yasuo

2010-01-01

Through the RANDEC delegation tour to Korea in Nov. 2009, we have earned new information on recent development of the radioactive waste management in Korea. In this report, we will introduce such development in Korea, focusing on the current construction status of Korean LILW (low and intermediate level radioactive waste) disposal site, now called, Wolsong Nuclear Environment Management Center. (author)

Contingency planning and emergency response in construction activities: Training the construction worker

International Nuclear Information System (INIS)

Jones, E.

1987-01-01

Construction activities have the potential for environmental and/or health impacts at Oak Ridge National Laboratory (ORNL) particularly as site cleanup and restoration plans are initiated. ORNL has instituted special training for all construction workers and related contractors. Individuals learn how construction activities at ORNL can potentially have adverse effects on the environment and their health, and to learn how to respond to potential chemical and radiation hazards. Workers are given a review of basic information on radiation and chemicals in a framework that emphasizes the situations in which workers or the environment may be exposed to potential risk. Specific instructions are presented on what to do when contamination is suspected, with identification of emergency procedures and response personnel. 5 refs., 1 fig

European Sustainable Construction Regulation : Homogeneity and Attention

NARCIS (Netherlands)

Van der Heijden, J.; Van Bueren, E.M.

2011-01-01

Understanding the negative impact of the construction industry and the built environment on the ecological environment, the European Commission (EC) aims to harmonise and improve sustainable construction regulatory frameworks in Member States of the European Union. This paper discusses the topics of

Niche construction through phenological plasticity: life history dynamics and ecological consequences.

Science.gov (United States)

Donohue, Kathleen

2005-04-01

The ability of an organism to alter the environment that it experiences has been termed 'niche construction'. Plants have several ways whereby they can determine the environment to which they are exposed at different life stages. This paper discusses three of these: plasticity in dispersal, flowering timing and germination timing. It reviews pathways through which niche construction alters evolutionary and ecological trajectories by altering the selective environment to which organisms are exposed, the phenotypic expression of plastic characters, and the expression of genetic variation. It provides examples whereby niche construction creates positive or negative feedbacks between phenotypes and environments, which in turn cause novel evolutionary constraints and novel life-history expression. Copyright New Phytologist (2005).

Construction in Occupied Spaces

Directory of Open Access Journals (Sweden)

Ward Andrew E.

2017-06-01

Full Text Available Conducting construction activities in occupied environments presents a great challenge due to the additional logistical requirements and the presence of the building occupants. The aim of this research is to gather and evaluate the means and methods to successfully plan, manage, and execute construction activities in occupied spaces in an effort to provide consolidated industry tools and strategies for maintaining a schedule and minimizing the impact on the occupants. The methodology of the research utilizes an exploratory approach to gather qualitative data. The data was collected through interviews with industry professionals to identify industry best practices. The semi-structured interviews provided a platform for the documents, lessons learned, and the techniques and strategies used for occupied construction by the construction industry. The information obtained in the interview process identified six themes that are critical to achieving and maintaining quality in occupied construction. These themes of the schedule, cost, customer satisfaction, planning, fire/life safety and utilities, and contractor management are reviewed in detail, and the paper discusses how to manage each element. The analysis and extracted management techniques, procedures and strategies can be used by the construction industry for future projects by focusing on the critical aspects of occupied construction and the manner in which to succeed with it.

Construction in Occupied Spaces

Science.gov (United States)

Ward, Andrew E.; Azhar, Salman; Khalfan, Malik

2017-06-01

Conducting construction activities in occupied environments presents a great challenge due to the additional logistical requirements and the presence of the building occupants. The aim of this research is to gather and evaluate the means and methods to successfully plan, manage, and execute construction activities in occupied spaces in an effort to provide consolidated industry tools and strategies for maintaining a schedule and minimizing the impact on the occupants. The methodology of the research utilizes an exploratory approach to gather qualitative data. The data was collected through interviews with industry professionals to identify industry best practices. The semi-structured interviews provided a platform for the documents, lessons learned, and the techniques and strategies used for occupied construction by the construction industry. The information obtained in the interview process identified six themes that are critical to achieving and maintaining quality in occupied construction. These themes of the schedule, cost, customer satisfaction, planning, fire/life safety and utilities, and contractor management are reviewed in detail, and the paper discusses how to manage each element. The analysis and extracted management techniques, procedures and strategies can be used by the construction industry for future projects by focusing on the critical aspects of occupied construction and the manner in which to succeed with it.

A Study on Evaluation of Living Environment by Students' Preferences in Residences

OpenAIRE

鶴崎, 直樹; 坂井, 猛; 上野, 武; 有馬, 隆文; Tsurusaki, Naoki; Sakai, Takeru; Ueno, Takeshi; Arima, Takafumi

2006-01-01

The purpose of this paper was to construct a living quarters environment evaluation method by surveying students' preferences in residences and to apply the evaluation method to the Kyushu University Hakozaki campus so as to inspect the method's efficacy and applicability to a new campus. The obtained results included: 1)information about preferences in residence selection by students attending Kyushu University. 2)proof of efficacy from the viewpoint of students in the Kyushu University Hako...

Assessment of radiation impact on the environment components while preparing for construction site of centralized storage facility for spent nuclear fuel (CSSNF)

International Nuclear Information System (INIS)

Pavlovs'kij, L.Yi.; Gorodets'kij, D.V.; Syizov, A.O.; Kholodyuk, A.O.

2016-01-01

Predictive assessment of radiation impacts on the air environment, soil cover, staff, which is located in a residential area, staff of an adjacent to the CSSNF enterprises as a result of work to prepare the site for construction of CSSNF at the Chornobyl Exclusion Zone is presented. It is shown that radiation effects on components of the environment will not result in exceeding the reference levels of radiation safety

Industrialization for sustainable construction?

NARCIS (Netherlands)

Egmond - de Wilde De Ligny, van E.L.C.; Barrett, P; Amaratunga, D.; Haigh, R; Keraminiyage, K.; Pathirage, C

2010-01-01

Sustainable construction (SuCo), which genesis dates in the early 1990’s, advocates the creation and operation of a quality and healthy built environment based on resource efficiency, life cycle economics and ecological principles. (Kibert, 2003). Currently the Construction Industry does not meet

BASES OF CONSTRUCTIVITY OF MODERN PERSONALITY

Directory of Open Access Journals (Sweden)

Natalya Petrovna Shatalova

2014-11-01

Full Text Available Formation of bases of constructibility is important process at this stage of de-velopment of our state. Personality of modern type must be capable to self-determination, competent adoption of constructive decisions and manifestation of a personal responsibility for the constructive election, personality of modern type must be capable for self-determination, competent adoption of constructive decisions and manifestation to a personal responsibility for the constructive choice. Formation of bases of constructibility in the course of education is caused by use of constructive tasks and the constructive educational environment which define innovative recep-tions and skills of influence as methods of pedagogical influence taking into account constantly changing circumstances. Extent of mastering each member of society bases of constructibility defines a spiritual condition of society, of the present and the future of our country, development of economy and culture in general.Purpose: consideration of question about development of constructive thinking and constructive skills of personality in modern constructive educational environ-ment.Methodology: formal pedagogical method, the theoretical modeling, the meth-od of participant observation.Results. In the article is give the short analysis of problem of development of personality in modern society, opened the concept of constructibility of the personali-ty and her basic components, classification constructive tasks investigated, specified preparatory steps for organization of the conditions of development of a constructibil-ity and gives a brief description of their. Article has the scientific value as contains au-thor's generalizations possessing scientific novelty and the conclusions directed on disclosure of problems of formation and development of the modern personality, considered from the point of view of the theory of democratic constructivism in edu-cation.Practical implications: pedagogical

Organizational analysis of construction projects

OpenAIRE

Hughes, Will

1989-01-01

This research project is about the analysis of construction project organizations. The work is based on organizational theory and is a development of Linear Responsibility Analysis (LRA). The aim is to assess the extent to which project success is affected by organizational structure. The analysis of four public sector case studies raises several issues. First is the need for a systematic model of describing and analysing construction project environments. A framework has been developed that ...

Virtual environment navigation with look-around mode to explore new real spaces by people who are blind.

Science.gov (United States)

Lahav, Orly; Gedalevitz, Hadas; Battersby, Steven; Brown, David; Evett, Lindsay; Merritt, Patrick

2018-05-01

This paper examines the ability of people who are blind to construct a mental map and perform orientation tasks in real space by using Nintendo Wii technologies to explore virtual environments. The participant explores new spaces through haptic and auditory feedback triggered by pointing or walking in the virtual environments and later constructs a mental map, which can be used to navigate in real space. The study included 10 participants who were congenitally or adventitiously blind, divided into experimental and control groups. The research was implemented by using virtual environments exploration and orientation tasks in real spaces, using both qualitative and quantitative methods in its methodology. The results show that the mode of exploration afforded to the experimental group is radically new in orientation and mobility training; as a result 60% of the experimental participants constructed mental maps that were based on map model, compared with only 30% of the control group participants. Using technology that enabled them to explore and to collect spatial information in a way that does not exist in real space influenced the ability of the experimental group to construct a mental map based on the map model. Implications for rehabilitation The virtual cane system for the first time enables people who are blind to explore and collect spatial information via the look-around mode in addition to the walk-around mode. People who are blind prefer to use look-around mode to explore new spaces, as opposed to the walking mode. Although the look-around mode requires users to establish a complex collecting and processing procedure for the spatial data, people who are blind using this mode are able to construct a mental map as a map model. For people who are blind (as for the sighted) construction of a mental map based on map model offers more flexibility in choosing a walking path in a real space, accounting for changes that occur in the space.

Target Article with Commentaries: Developmental Niche Construction

Science.gov (United States)

Flynn, Emma G.; Laland, Kevin N.; Kendal, Rachel L.; Kendal, Jeremy R.

2013-01-01

Niche construction is the modification of components of the environment through an organism's activities. Humans modify their environments mainly through ontogenetic and cultural processes, and it is this reliance on learning, plasticity and culture that lends human niche construction a special potency. In this paper we aim to facilitate…

40 CFR 7.70 - New construction.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false New construction. 7.70 Section 7.70... of Handicap § 7.70 New construction. (a) General. New facilities shall be designed and constructed to... 18, 1991, design, construction, or alteration of buildings in conformance with sections 3-8 of the...

Constructing criticality by classification

DEFF Research Database (Denmark)

Machacek, Erika

2017-01-01

" in the bureaucratic practice of classification: Experts construct material criticality in assessments as they allot information on the materials to the parameters of the assessment framework. In so doing, they ascribe a new set of connotations to the materials, namely supply risk, and their importance to clean energy......, legitimizing a criticality discourse.Specifically, the paper introduces a typology delineating the inferences made by the experts from their produced recommendations in the classification of rare earth element criticality. The paper argues that the classification is a specific process of constructing risk....... It proposes that the expert bureaucratic practice of classification legitimizes (i) the valorisation that was made in the drafting of the assessment framework for the classification, and (ii) political operationalization when enacted that might have (non-)distributive implications for the allocation of public...

Construction time of PWRs

Energy Technology Data Exchange (ETDEWEB)

Carajilescov, Pedro; Moreira, Joao M.L., E-mail: pedro.carajilescov@ufabc.edu.b, E-mail: joao.moreira@ufabc.edu.b [Universidade Federal do ABC (UFABC), Santo Andre, SP (Brazil). Center of Engineering, Modeling and Applied Social Sciences

2011-07-01

The cost of electricity generated by nuclear power is greatly affected by the capital cost, which is dependent on the construction time of the plant. This work analyses the construction time of PWRs in several countries with different market structure and licensing experience. Countries which succeeded to establish a more collaborative environment among utilities, constructors, regulators, and energy planners through effective partnerships were able to build PWRs in shorter times. The construction time in Germany, France and Russia was around 80 months and in Japan, about 60 months. The envelope of 95% of the cases includes a range between 50 and 250 months of construction time. The evaluations show that construction time of PWRs has been longer for countries that did not hold the technology to build their own reactors, and depended on contracts with foreign suppliers. The nominal power of the reactors was considered a measure of plant size, technology complexity and standardization. Countries with standardized reactor designs (France, Japan and Russia) were able to build plants in shorter times. (author)

Construction time of PWRs

International Nuclear Information System (INIS)

Carajilescov, Pedro; Moreira, Joao M.L.

2011-01-01

The cost of electricity generated by nuclear power is greatly affected by the capital cost, which is dependent on the construction time of the plant. This work analyses the construction time of PWRs in several countries with different market structure and licensing experience. Countries which succeeded to establish a more collaborative environment among utilities, constructors, regulators, and energy planners through effective partnerships were able to build PWRs in shorter times. The construction time in Germany, France and Russia was around 80 months and in Japan, about 60 months. The envelope of 95% of the cases includes a range between 50 and 250 months of construction time. The evaluations show that construction time of PWRs has been longer for countries that did not hold the technology to build their own reactors, and depended on contracts with foreign suppliers. The nominal power of the reactors was considered a measure of plant size, technology complexity and standardization. Countries with standardized reactor designs (France, Japan and Russia) were able to build plants in shorter times. (author)

Sustainable Transition of Housing and Construction

DEFF Research Database (Denmark)

This book presents recent research into sustainable transition of housing and construction through contributions from researchers and knowledge providers that have worked with change processes within housing and construction. The contributors represent different research and development...... environments, each with their own tradition and with a number of different research projects behind them in the field. Their common ground is that they have researched and analyzed construction, dwellings and housing areas with a view to energy-, environment- and climate-oriented transition of the housing...... and construction sector, with a focus on either political, socio-cultural, technical or design challenges. The contributions thus represent both technological, architectural, sociological and political aspects of the Danish housing and construction field. The aim of the book has not been to add another book...

Prefabrication in Building Construction: A Perspective of Pakistan Construction Industry

Directory of Open Access Journals (Sweden)

Nafees Ahmed Memon

2014-07-01

Full Text Available Construction industry is facing many problems in terms of construction waste, quality, environment, durability, safety and higher construction cost. Adoption of prefabrication is a possible solution to such problems. Accordingly, there is a need to study the prospects that would stimulate the appropriate discussion of the suitability of prefabrication and other construction methods for concrete buildings. Therefore, this study investigates the significance of advantages in adopting prefabrication along with hindrances through questionnaire survey. The data has been analyzed using RIW (Relative Importance Weight method as a MCDM approach. The results depict that main advantages of prefabrication are ?Shorter construction time? and ?Less construction site waste?. The top hindrances in adopting prefabrication as identified in this study are: ?Higher initial construction cost? and ?Inflexible for design changes?. Based on the survey results and apparent progress in the adoption of prefabrication around the world, it is concluded that the use of prefabrication is likely to increase in developing countries like Pakistan

Prefabrication in building construction: a perspective of pakistan construction industry

International Nuclear Information System (INIS)

Memon, N.A.; Memon, F.A.; Khehro, S.H.

2014-01-01

Construction industry is facing many problems in terms of construction waste, quality, environment, durability, safety and higher construction cost. Adoption of prefabrication is a possible solution to such problems. Accordingly, there is a need to study the prospects that would stimulate the appropriate discussion of the suitability of prefabrication and other construction methods for concrete buildings. Therefore, this study investigates the significance of advantages in adopting prefabrication along with hindrances through questionnaire survey. The data has been analyzed using RIW (Relative Importance Weight) method as a MCDM approach. The results depict that main advantages of prefabrication are Shorter construction time and Less construction site waste. The top hindrances in adopting prefabrication as identified in this study are: Higher initial construction cost and Inflexible for design changes. Based on the survey results and apparent progress in the adoption of prefabrication around the world, it is concluded that the use of prefabrication is likely to increase in developing countries like Pakistan. (author)

STIMULATION OF CONSTRUCTION OF AFFORDABLE HOUSING BY REFORMATION OF A CONSTRUCTION COMPLEX MANAGEMENT SYSTEM

Directory of Open Access Journals (Sweden)

BRONEVYTSKYI S. P.

2015-10-01

Full Text Available Purpose. Development of offers on stimulation of construction of affordable housing by reformation of a construction complex management system. Methodology. The revelation of the problems of planning of construction in large cities. The analysis of forming of structure of a build complex management in soviet times and in a transitional period. The revelation of the modern, actual, socio-economic problems of the construction activity management. Proposition on the improvement of methods of construction management in cities of Ukraine. Results. The methods of a construction complex management in countries with a market economy as for building of affordable housing are shown. Originality. In composition of a town-planning documentations, except for the norms of the common use of territories of city (density of population of micro region, the maximum parameters of a construction examining of land areas are proposed to determine: building percent and coefficient of maximum superficial area. Practical value. The principle of management and organization of construction is norms of a build use of territories for building of mass affordable housing for funds of population and investors while providing of the comfort of housing in accordance with state construction norms.

Adaptation, test-retest reliability, and construct validity of the Physical Activity Neighborhood Environment Scale in Nigeria (PANES-N).

Science.gov (United States)

Oyeyemi, Adewale L; Sallis, James F; Oyeyemi, Adetoyeje Y; Amin, Mariam M; De Bourdeaudhuij, Ilse; Deforche, Benedicte

2013-11-01

This study adapted the Physical Activity Neighborhood Environment Scale (PANES) to the Nigerian context and assessed the test-retest reliability and construct validity of the Nigerian version (PANESN). A multidisciplinary panel of experts adapted the original PANES to reflect the built and social environment of Nigeria. The adapted PANES was subjected to cognitive testing and test retest reliability in a diverse sample of Nigerian adults (N = 132) from different neighborhood types. Intraclass Correlation Coefficients (ICC) was used to assess test-retest reliability, and construct validity was investigated with Analysis of Covariance for differences in environmental attributes between neighborhoods. Four of the 17 items on the original PANES were significantly modified, 3 were removed and 2 new items were incorporated into the final version of adapted PANES-N. Test-retest reliability was substantial to almost perfect (ICC = 0.62-1.00) for all items on the PANES-N, and residents of neighborhoods in the inner city reported higher residential density, land use mix and safety, but lower pedestrian facilities and aesthetics than did residents of government reserved area/new layout neighborhoods. The PANES-N appears promising for assessing environmental perceptions related to physical activity in Nigeria, but further testing is required to assess its applicability across Africa.

An Action Environment

DEFF Research Database (Denmark)

van den Brand, Mark; Iversen, Jørgen; Mosses, Peter David

2004-01-01

constructs underlying Core ML. The paper also describes the Action Environment, a new environment supporting use and validation of ASDF descriptions. The Action Environment has been implemented on top of the ASF+SDF Meta-Environment, exploiting recent advances in techniques for integration of different...... formalisms, and inheriting all the main features of the Meta-Environment....

Supramolecular Liquid Crystal Displays Construction and Applications

OpenAIRE

Hoogboom, J.T.V.

2004-01-01

This thesis describes chemical methodologies, which can be ued to construct alignment layers for liquid crystal display purposes in a non-clean room environment, by making use of supramolecular chemistry. These techniques are subsequently used to attain control over LCD-properties, both pre- and post-LCD construction. In addition, the thesis describes the application of LCD technology in biosensors.

"Earthen constructions" - towards creating a sustainable habitat by minimising the ecological footprint

Directory of Open Access Journals (Sweden)

Aparna Das

2008-12-01

Full Text Available Sustenance of the human race has put an immense pressure on our planet Earth in terms of sustainability of natural resources. The greenhouse effect and the ozone hole are the two most threatening effects of pollution. Constructions of buildings as well as materials contribute to a large percentage to this pollution. Again every material used in the building industry has its source in the Earth. In general the low energy materials will be least polluting. The conventionally used building materials like bricks, cement, steel, timber, plastics, glass etc. usually involve huge transportation costs and also manufacturing processes which are detriment al to the environment. On the other hand the demand for new buildings as well as the cost of building construction is growing a tremendous pace. We have to search for alternative materials which are energy efficient, environment friendly and economical like our traditional building materials - mud walls and thatch roofs. Of all the alternatives available to us which lead the way to sustainability, building with earth has been an ancient and accepted practice among communities all over the world. It is estimated that the construction and the operation of buildings is responsible for around half of all glob al C02 emissions, thereby contributing the largest single source attributable to climate change. Earthen construction has been, is and will continue to be a reality. Stabilised rammed earth walls can be used as a building integrated source of passive cooling technique. A huge population in Indi a lives in the rural areas where there has been a growing trend in shifting towards brick and concrete constructions in search for social status. Even a small percentage can lead to massive increase in glob l C02 emissions if the trend is not checked at this point. This papers looks into the current scenario and hence the corresponding responsibility on architects, planners and policy makers to bring in

NanoData Landscape Compilation. Construction

NARCIS (Netherlands)

Allan, J.E.M.; Bakker, B.J.; Buist, H.E.; Flament, G.; Hartmann, C.; Jawad, I.; Kuijpers, L.T.; Kuittinen, H.; Noyons, E.; Stolwijk, C.C.M.; Olaeta, X.U.; Yegros, A.

2017-01-01

This report offers a snapshot of the status of the environment for nanotechnology in the context of construction. The construction industry covers the building, maintaining and repairing of buildings and infrastructures for living, working and transport, including providing materials for those

Quality assurance of the clinical learning environment in Austria: Construct validity of the Clinical Learning Environment, Supervision and Nurse Teacher Scale (CLES+T scale).

Science.gov (United States)

Mueller, Gerhard; Mylonas, Demetrius; Schumacher, Petra

2018-04-21

Within nursing education, the clinical learning environment is of a high importance in regards to the development of competencies and abilities. The organization, atmosphere, and supervision in the clinical learning environment are only a few factors that influence this development. In Austria there is currently no valid instrument available for the evaluation of influencing factors. The aim of the study was to test the construct validity with principal component analysis as well as the internal consistency of the German Clinical Learning Environment, Supervision and Teacher Scale (CLES+T scale) in Austria. The present validation study has a descriptive-quantitative cross-sectional design. The sample consisted of 385 nursing students from thirteen training institutions in Austria. The data collection was carried out online between March and April 2016. Starting with a polychoric correlation matrix, a parallel analysis with principal component extraction and promax rotation was carried out due to the ordinal data. The exploratory ordinal factor analysis supported a four-component solution and explained 73% of the total variance. The internal consistency of all 25 items reached a Cronbach's α of 0.95 and the four components ranged between 0.83 and 0.95. The German version of the CLES+T scale seems to be a useful instrument for identifying potential areas of improvement in clinical practice in order to derive specific quality measures for the practical learning environment. Copyright © 2018 Elsevier Ltd. All rights reserved.

Initial evaluation of psychometric properties of a structured work task application for the Assessment of Work Performance in a constructed environment.

Science.gov (United States)

Karlsson, Elin A; Liedberg, Gunilla M; Sandqvist, Jan L

2017-06-22

The Swedish Social Insurance Administration has developed a new assessment tool for sickness insurance. This study is a part of the initial evaluation of the application, called the Assessment of Work Performance, Structured Activities, and focuses on evaluation of the psychometric properties of social validity, content validity, and utility. This was a qualitative study using semi-structured telephone interviews with occupational therapists. A convenience sample was used and participants who fulfilled inclusion criteria (n = 15) were interviewed. Data were analyzed using content analysis with a directed approach. The results indicate that the application provides valuable information and that it is socially valid. Assessors found work tasks suitable for a diverse group of clients and reported that clients accepted the assessments. Improvements were suggested, for example, expanding the application with more work tasks. The instrument has benefits; however, further development is desired. The use of a constructed environment in assessments may be a necessary option to supplement a real environment. But depending on organizational factors such as time and other resources, the participants had different opportunities to do so. Further evaluations regarding ecological validity are essential to ensure that assessments are fair and realistic when using constructed environments. Implications for rehabilitation This study indicates that assessment in a constructed environment can provide a secure and protected context for clients being assessed. Psychometric evaluations are a never-ending process and this assessment instrument needs further development. However, this initial evaluation provides guidance in development of the instrument but also what studies to give priority to. It is important to evaluate social validity in order to ensure that clients and assessors perceive assessment methods fair and meaningful. In this study, participants found the work tasks

A System Theoretical Inspired Approach to Knowledge Construction

DEFF Research Database (Denmark)

Mathiasen, Helle

2008-01-01

student's knowledge construction, in the light of operative constructivism, inspired by the German sociologist N. Luhmann's system theoretical approach to epistemology. Taking observations as operations based on distinction and indication (selection) contingency becomes a fundamental condition in learning......  Abstract The aim of this paper is to discuss the relation between teaching and learning. The point of departure is that teaching environments (communication forums) is a potential facilitator for learning processes and knowledge construction. The paper present a theoretical frame work, to discuss...... processes, and a condition which teaching must address as far as teaching strives to stimulate non-random learning outcomes. Thus learning outcomes understood as the individual learner's knowledge construction cannot be directly predicted from events and characteristics in the environment. This has...

Excavation and aggregation as organizing factors in de novo construction by mound-building termites.

Science.gov (United States)

Green, Ben; Bardunias, Paul; Turner, J Scott; Nagpal, Radhika; Werfel, Justin

2017-06-14

Termites construct complex mounds that are orders of magnitude larger than any individual and fulfil a variety of functional roles. Yet the processes through which these mounds are built, and by which the insects organize their efforts, remain poorly understood. The traditional understanding focuses on stigmergy, a form of indirect communication in which actions that change the environment provide cues that influence future work. Termite construction has long been thought to be organized via a putative 'cement pheromone': a chemical added to deposited soil that stimulates further deposition in the same area, thus creating a positive feedback loop whereby coherent structures are built up. To investigate the detailed mechanisms and behaviours through which termites self-organize the early stages of mound construction, we tracked the motion and behaviour of major workers from two Macrotermes species in experimental arenas. Rather than a construction process focused on accumulation of depositions, as models based on cement pheromone would suggest, our results indicated that the primary organizing mechanisms were based on excavation. Digging activity was focused on a small number of excavation sites, which in turn provided templates for soil deposition. This behaviour was mediated by a mechanism of aggregation, with termites being more likely to join in the work at an excavation site as the number of termites presently working at that site increased. Statistical analyses showed that this aggregation mechanism was a response to active digging, distinct from and unrelated to putative chemical cues that stimulate deposition. Agent-based simulations quantitatively supported the interpretation that the early stage of de novo construction is primarily organized by excavation and aggregation activity rather than by stigmergic deposition. © 2017 The Author(s).

Construction Worker Fatigue Prediction Model Based on System Dynamic

OpenAIRE

Wahyu Adi Tri Joko; Ayu Ratnawinanda Lila

2017-01-01

Construction accident can be caused by internal and external factors such as worker fatigue and unsafe project environment. Tight schedule of construction project forcing construction worker to work overtime in long period. This situation leads to worker fatigue. This paper proposes a model to predict construction worker fatigue based on system dynamic (SD). System dynamic is used to represent correlation among internal and external factors and to simulate level of worker fatigue. To validate...

Determination of brace forces caused by construction loads and wind loads during bridge construction.

Science.gov (United States)

2014-04-01

The first objective of this study was to develop procedures for determining bracing forces during bridge construction. : Numerical finite element models and analysis techniques were developed for evaluating brace forces induced by construction loads ...

40 CFR 40.115-1 - Construction.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Construction. 40.115-1 Section 40.115-1... DEMONSTRATION GRANTS § 40.115-1 Construction. May include the preliminary planning to determine the economic and... action necessary to the construction of a facility, the erection, acquisition, alteration, remodeling...

Constructional Efficiency in Al_Ahwaar Traditional Architecture

Directory of Open Access Journals (Sweden)

Usama Abdul-Mun'em Khuraibet

2016-03-01

Full Text Available Constructional Efficiency in architecture in general is one of the most important standard success for any structure and a measure of its continuity and relevance across time and space. Given the importance of Al-Ahwaar environment that owned the spatial, environmental, economic and social elements had a prominent impact in creation of architecture patterns form to create special architectural and structural environment, which had many qualities and ingredients that contributed to its continuity and existence over the years. From the premise that man and his environment is the main goal to any architectural style, Thus the research problem focusing on the lack of clarity of the previous literatures in its studies for the role of architectural styles in Al-Ahwaar in achieving constructional efficiency, despite the large number of studies on Al-Ahwaar architecture but it is mostly marked by non-clarity and lack in the constructional and technical aspects, Therefore, the research goal focusing on clarification of the impact of the techniques that used in formations Al_Ahwaar traditional architecture in order to reach to the constructional efficiency in various aspects such as technical, material, economical, and expressional. Assuming that achieving to the constructional efficiency at Al-Ahwaar traditional architecture depends on its characteristics and elements that contributed to the continuity of their patterns across time. The research depended on analytical method of a model of traditional architecture in Al-Ahwaar to reach those goals, as the study of these items aims to deepen the understanding of the designer to the requirements of each component in order to achieve integration together. These components must not conflict with each other, but it must be integrated during and after the design process until it comes out as a creative of architectural destination. al-ahwaar architecture, constructional efficiency, technical and material

Authoring multimedia in the CMIF environment

NARCIS (Netherlands)

L. Hardman (Lynda); G. van Rossum (Guido); D.C.A. Bulterman (Dick)

1993-01-01

textabstractWe present the user interface to the CMIF authoring environment for constructing and playing multimedia presentations. Within the environment an author constructs a presentation in terms of its structure and additional synchronization constraints, from which the actual

Evaluation on construction quality of pit filler material of cavern type radioactive waste disposal facility

International Nuclear Information System (INIS)

Takechi, Shin-ichi; Yokozeki, Kosuke; Shimbo, Hiroshi; Terada, Kenji; Akiyama, Yoshihiro; Yada, Tsutomu; Tsuji, Yukikazu

2014-01-01

The pit filler material of the underground cavern-type radioactive waste disposal facility, which is poured directly around the radioactive waste packages where high temperature environment is assumed by their decay heat, is concerned to be adversely affected on the filling behavior and its hardened properties. There also are specific issues that required quality of construction must be achieved by unmanned construction with remote operation, because the pit filler construction shall be done under radiation environment. In this paper, the mix proportion of filler material is deliberated with filling experiments simulating high temperature environment, and also the effect of temperature on hardened properties are confirmed with high temperature curing test. Subsequently, the feasibility of unmanned construction method of filler material by pumping, and by movable bucket, are comparatively discussed through a real size demonstration. (author)

Enhancing knowledge sharing management using BIM technology in construction.

Science.gov (United States)

Ho, Shih-Ping; Tserng, Hui-Ping; Jan, Shu-Hui

2013-01-01

Construction knowledge can be communicated and reused among project managers and jobsite engineers to alleviate problems on a construction jobsite and reduce the time and cost of solving problems related to constructability. This paper proposes a new methodology for the sharing of construction knowledge by using Building Information Modeling (BIM) technology. The main characteristics of BIM include illustrating 3D CAD-based presentations and keeping information in a digital format and facilitation of easy updating and transfer of information in the BIM environment. Using the BIM technology, project managers and engineers can gain knowledge related to BIM and obtain feedback provided by jobsite engineers for future reference. This study addresses the application of knowledge sharing management using BIM technology and proposes a BIM-based Knowledge Sharing Management (BIMKSM) system for project managers and engineers. The BIMKSM system is then applied in a selected case study of a construction project in Taiwan to demonstrate the effectiveness of sharing knowledge in the BIM environment. The results demonstrate that the BIMKSM system can be used as a visual BIM-based knowledge sharing management platform by utilizing the BIM technology.

Modularization Technology in Power Plant Construction

International Nuclear Information System (INIS)

Kenji Akagi; Kouichi Murayama; Miki Yoshida; Junichi Kawahata

2002-01-01

Since the early 1980's, Hitachi has been developing and applying modularization technology to domestic nuclear power plant construction, and has achieved great rationalization. Modularization is one of the plant construction techniques which enables us to reduce site labor by pre-assembling components like equipment, pipes, valves and platforms in congested areas and installing them using large capacity cranes for cost reduction, better quality, safety improvement and shortening of construction time. In this paper, Hitachi's modularization technologies are described especially from with respect to their sophisticated design capabilities. The application of 3D-CAD at the detailed layout design stage, concurrent design environment achieved by the computer network, module design quantity control and the management system are described. (authors)

Internet-based Interactive Construction Management Learning System.

Science.gov (United States)

Sawhney, Anil; Mund, Andre; Koczenasz, Jeremy

2001-01-01

Describes a way to incorporate practical content into the construction engineering and management curricula: the Internet-based Interactive Construction Management Learning System, which uses interactive and adaptive learning environments to train students in the areas of construction methods, equipment and processes using multimedia, databases,…

Visualization of construction engineering

International Nuclear Information System (INIS)

Okada, Hisako; Miura, Jun

2000-01-01

It is required for nuclear power plant construction to reduce construction cost and shorten construction period. An early and accurate construction planning including schedule coordination among the companies has recently become more important and it is possible to obtain necessary information for construction planning in early stage. In this situation, we have been developing a visualization system for construction engineering for nuclear power plants. This system has an interface with the existing Plant Layout 3D-CAD system and consists of three sub systems: (1) Scheduling and simulation system, (2) Yard planning system and (3) Scaffolding planning system. This paper describes overview of this system. This visualization system is very helpful for construction engineers to easily understand situation and environment around installation area, to easily plan a work sequence and confirm the planned schedule, and it is also effective for customers and workers to understand the planning. As a result, this visualization system enables safety and high quality construction. (author)

Nano-in-Micro Self-Reporting Hydrogel Constructs.

Science.gov (United States)

Tirella, Annalisa; La Marca, Margherita; Brace, Leigh-Anne; Mattei, Giorgio; Aylott, Jonathan W; Ahluwalia, Arti

2015-08-01

Highly reproducible Nano-in-Micro constructs are fabricated to provide a well-defined and self-reporting biomimetic environment for hepatocytes. Based on a protein/hydrogel formulation with controlled shape, size and composition, the constructs enable efficient nutrient exchange and provide an adhesive 3D framework to cells. Co-encapsulation of hepatocytes and ratiometric optical nanosensors with pH sensitivity in the physiological range allows continuous monitoring of the microenvironment. The lobule-sized microbeads are fabricated using an automated droplet generator, Sphyga (Spherical Hydrogel Generator) combining alginate, collagen, decellularized hepatic tissue, pH-nanosensors and hepatocytes. The pH inside the Nano-in-Micro constructs is monitored during culture, while assaying media for hepatic function and vitality markers. Although the local pH changes by several units during bead fabrication, when encapsulated cells are most likely to undergo stress, it is stable and buffered by cell culture media thereafter. Albumin secretion and urea production are significantly higher in the microbeads compared with controls, indicating that the encapsulated Nano-in-Micro environment is conducive to enhanced hepatic function.

The construction of work–life balance: The experience of Black employees in a call-centre environment

OpenAIRE

Sonia C.B. Potgieter; Antoni Barnard

2010-01-01

Orientation: Work–life balance, as a crucial aspect of employee and organisational wellness, remains an interesting field of research, especially due to the changing demographic employee profile.Research purpose: The objective of the study was to explore Black employees’ construction of work–life balance in a customer care environment.Motivation for the study: The conceptual debate regarding the construct of work–life balance in general as well as limited qualitative research with regard to B...

Demonstration of energy-saving construction works; Shoshigenka wo mezashita kenchiku koji no jissho kenkyu

Energy Technology Data Exchange (ETDEWEB)

Kobayashi, T.; Yamagishi, M.; Kakimi, S. [Chubu Electric Power Co. Inc., Nagoya (Japan)

1997-11-01

Studies are conducted to promote energy-saving in construction works as part of environment protection programs. The first phase is for survey and analysis works for energy-saving in the current building design and construction works, and for processes, procedures and materials in model works (construction of sub-stations). The second phase is for studying energy-saving designs, materials and procedures, which are applied to model works, to assess their energy-saving effects , costs and applicability. The horizontally developed samples are prepared for the future development, based on the `continuous improvement of environment-management systems by establishing the PDCA cycles,` which is one of the basic requirements of the ISO14001 (environment management system). These efforts have reduced CO2 emissions associated with the manufacture of construction materials by 20%, mixed wastes by 45%, and plywood frame requirement by 70%. It is also confirmed that they can be realized at only around 3% higher cost. 9 refs., 10 figs., 3 tabs.

Social cost in construction projects

International Nuclear Information System (INIS)

Çelik, Tolga; Kamali, Saeed; Arayici, Yusuf

2017-01-01

Despite the fact that completion of construction projects has a direct positive impact on the growth of national and local economies as well as humans' wellbeing, construction projects, especially in the urban areas, generate serious environmental nuisances for the adjacent residents and have unintentional adverse impacts on their surrounding environment. Construction causative adverse impacts on the neighbouring communities are known as the social costs. This study aims to present a state-of-the-art overview of social costs in construction industry in terms of definition, consideration, classification and quantification. Furthermore, it is aimed to bring the construction social cost phenomenon for the agenda of Environmental Impact Assessors.

Social cost in construction projects

Energy Technology Data Exchange (ETDEWEB)

Çelik, Tolga, E-mail: tolga.celik@emu.edu.tr [Department of Civil Engineering, Eastern Mediterranean University, Famagusta, T.R. North Cyprus, Via Mersin 10 (Turkey); Kamali, Saeed, E-mail: saeedkamali2002@gmail.com [Civil Engineering Department, Middle East Technical University, 06800 Ankara (Turkey); Arayici, Yusuf, E-mail: yusuf.arayici@hku.edu.tr [Department of Civil Engineering, Hasan Kalyoncu University, Gaziantep (Turkey)

2017-05-15

Despite the fact that completion of construction projects has a direct positive impact on the growth of national and local economies as well as humans' wellbeing, construction projects, especially in the urban areas, generate serious environmental nuisances for the adjacent residents and have unintentional adverse impacts on their surrounding environment. Construction causative adverse impacts on the neighbouring communities are known as the social costs. This study aims to present a state-of-the-art overview of social costs in construction industry in terms of definition, consideration, classification and quantification. Furthermore, it is aimed to bring the construction social cost phenomenon for the agenda of Environmental Impact Assessors.

Construction industry in developing countries

Energy Technology Data Exchange (ETDEWEB)

Moavenzadeh, F

1978-01-01

This paper provides a review of the construction capability available in the developing countries to meet the demand for shelter. It discusses the role of construction in the process of development and its importance to economic growth. It considers the issue facing the growth of a viable indigenous construction industry in the developing world within the context of the activities involved in the creation of constructed facilities--planning, design, contruction and maintenance; it also examines the environment within which the industry has developed. For each construction activity the paper reviews available capabilities, the various resources needed for the development of an indigenous industry, and some possible means of accommodating these needs.

Niche construction game cancer cells play.

Science.gov (United States)

Bergman, Aviv; Gligorijevic, Bojana

2015-10-01

Niche construction concept was originally defined in evolutionary biology as the continuous interplay between natural selection via environmental conditions and the modification of these conditions by the organism itself. Processes unraveling during cancer metastasis include construction of niches, which cancer cells use towards more efficient survival, transport into new environments and preparation of the remote sites for their arrival. Many elegant experiments were done lately illustrating, for example, the premetastatic niche construction, but there is practically no mathematical modeling done which would apply the niche construction framework. To create models useful for understanding niche construction role in cancer progression, we argue that a) genetic, b) phenotypic and c) ecological levels are to be included. While the model proposed here is phenomenological in its current form, it can be converted into a predictive outcome model via experimental measurement of the model parameters. Here we give an overview of an experimentally formulated problem in cancer metastasis and propose how niche construction framework can be utilized and broadened to model it. Other life science disciplines, such as host-parasite coevolution, may also benefit from niche construction framework adaptation, to satisfy growing need for theoretical considerations of data collected by experimental biology.

Niche construction game cancer cells play

Science.gov (United States)

Bergman, Aviv; Gligorijevic, Bojana

2015-10-01

Niche construction concept was originally defined in evolutionary biology as the continuous interplay between natural selection via environmental conditions and the modification of these conditions by the organism itself. Processes unraveling during cancer metastasis include construction of niches, which cancer cells use towards more efficient survival, transport into new environments and preparation of the remote sites for their arrival. Many elegant experiments were done lately illustrating, for example, the premetastatic niche construction, but there is practically no mathematical modeling done which would apply the niche construction framework. To create models useful for understanding niche construction role in cancer progression, we argue that a) genetic, b) phenotypic and c) ecological levels are to be included. While the model proposed here is phenomenological in its current form, it can be converted into a predictive outcome model via experimental measurement of the model parameters. Here we give an overview of an experimentally formulated problem in cancer metastasis and propose how niche construction framework can be utilized and broadened to model it. Other life science disciplines, such as host-parasite coevolution, may also benefit from niche construction framework adaptation, to satisfy growing need for theoretical considerations of data collected by experimental biology.

Spatial distributions of niche-constructing populations

Directory of Open Access Journals (Sweden)

Xiaozhuo Han

2015-12-01

Full Text Available Niche construction theory regards organisms not only as the object of natural selection but also an active subject that can change their own selective pressure through eco-evolutionary feedbacks. Through reviewing the existing works on the theoretical models of niche construction, here we present the progress made on how niche construction influences genetic structure of spatially structured populations and the spatial-temporal dynamics of metapopulations, with special focuses on mathematical models and simulation methods. The majority of results confirmed that niche construction can significantly alter the evolutionary trajectories of structured populations. Organism-environmental interactions induced by niche construction can have profound influence on the dynamics, competition and diversity of metapopulations. It can affect fine-scale spatially distribution of species and spatial heterogeneity of the environment. We further propose a few research directions with potentials, such as applying adaptive dynamics or spatial game theory to explore the effect of niche construction on phenotypic evolution and diversification.

Authoring multimedia in the CMIF environment

OpenAIRE

Hardman, Lynda; Rossum, Guido; Bulterman, Dick

1993-01-01

textabstractWe present the user interface to the CMIF authoring environment for constructing and playing multimedia presentations. Within the environment an author constructs a presentation in terms of its structure and additional synchronization constraints, from which the actual timing information is derived. The CMIF authoring environment presents three main views of a multimedia presentation: a hierarchy view for manipulating and viewing a presentation’s hierarchical structure; a channel ...

[Occupational injuries among construction workers in Hong Kong].

Science.gov (United States)

Huang, Zihui; Chen, Weiqing

2002-02-01

To explore the nature and severity of occupational injuries among construction workers and its risk factors in Hong Kong. One hundred and twenty-two injured construction workers in a public hospital and an equal number of workmate controls were studied. Contents included socio -demographic characteristics, the availability and use of safety equipment, smoking and alcohol consumption, etc. Abbreviated injury scale (AIS) and injury severity score (ISS) were employed for describing the nature, pattern and severity of injuries. Single injuries were seen in 80% of cases. Of 149 injuries classified by body region, 49% were external, 26% involved either the upper or lower extremities, and 11% were spinal injuries. Working at height was associated with the injury severity score. Safety hazards were identified in the work environment in 68% of the cases. Significant odds ratios for accidents were obtained for 'no formal education', 'non safety training' and 'current smokers'. The results implicated that construction was a hazardous occupation in Hong Kong. Improving the work environment and promoting safety education among construction workers would be helpful for minimizing or eliminating occupational injuries in construction occupation in Hong Kong.

A Virtual Environments Editor for Driving Scenes

Directory of Open Access Journals (Sweden)

Ronald R. Mourant

2003-12-01

Full Text Available The goal of this project was to enable the rapid creation of three-dimensional virtual driving environments. We designed and implemented a high-level scene editor that allows a user to construct a driving environment by pasting icons that represent 1 road segments, 2 road signs, 3 trees and 4 buildings. These icons represent two- and three-dimensional objects that have been predesigned. Icons can be placed in the scene at specific locations (x, y, and z coordinates. The editor includes the capability of a user to "drive" a vehicle using a computer mouse for steering, accelerating and braking. At any time during the process of building a virtual environment, a user may switch to "Run Mode" and inspect the three-dimensional scene by "driving" through it using the mouse. Adjustments and additions can be made to the virtual environment by going back to "Build Mode". Once a user is satisfied with the threedimensional virtual environment, it can be saved in a file. The file can used with Java3D software that enables the traversing of three-dimensional environments. The process of building virtual environments from predesigned icons can be applied to many other application areas. It will enable novice computer users to rapidly construct and use three-dimensional virtual environments.

Exposure Characteristics of Construction Painters to Organic Solvents

Directory of Open Access Journals (Sweden)

Hyunhee Park

2016-03-01

Conclusion: From this study, we recognized that construction painters are exposed to various solvents, including carcinogens and reproductive toxins, and the levels of TVOC concentration in many of the painting tasks exceeded the exposure limits. Construction workers need to be protected from chemical agents during their painting works by using personal protective devices and/or work practice measures. Additional studies should focus on the exposure assessment of other hazards for construction workers, in order to identify high-risk tasks and to improve hazardous work environments.

Study on construction technology for repository

International Nuclear Information System (INIS)

Tanai, Kenji; Iwasa, Kengo; Hasegawa, Hiroshi; Miura, Kazuhiko; Okutsu, Kazuo; Kobayashi, Masaaki

1999-11-01

For the construction of underground facilities comprising access tunnels, connecting tunnels, main tunnels and disposal tunnels, a large number of tunnels will be excavated in deep rock formations. These excavations will extend hundreds kilometers in total length. Therefore, special attention must be paid, to transporting large volume of debris, ventilation, emergency escape routes in case of accident, and other factors. In addition, special attention must also paid to potential accidents which might in underground excavations, including unstable facing phenomena (such as collapse and swelling of facing at weak layer sections), spring water flow resulting collapse of rock, gas eruption, and rock burst. While considering these factors to be emphasized during the construction of geological disposal facilities, the investigation reviewed the existing working methods on individual construction technologies of access tunnels, main tunnels, connecting tunnels, disposal tunnels, and disposal pit, based on the recognition that the present state deals with a wide range of geological environments, and conducted investigation about the construction methods for each tunnel on the basis current technologies, and described the outline of these methods. Furthermore, for the items to be particularly emphasized on site characterization and siting data such as ground pressure and spring water, the investigation reviewed the current countermeasure works, and made survey on the phenomena appeared during actual tunnel construction works and their countermeasures, and carried out a study on effectiveness of these countermeasures. This constructing of disposal site in deep geological formations is basically possible by applying, or confirming, current excavation technologies for tunnels and underground facilities. A systematic construction system combines separate technologies relating to construction, (excavation technology, tunnel support work method, etc.). Such systems can be

Mathematical model of innovative sustainability “green” construction object

Directory of Open Access Journals (Sweden)

Slesarev Michail

2016-01-01

Full Text Available The paper addresses the issue of finding sustainability of “green” innovative processes in interaction between construction activities and the environment. The problem of today’s construction science is stated as comprehensive integration and automation of natural and artificial intellects within systems that ensure environmental safety of construction based on innovative sustainability of “green” technologies in the life environment, and “green” innovative products. The suggested solution to the problem should formalize sustainability models and methods for interpretation of optimization mathematical modeling problems respective to problems of environmental-based innovative process management, adapted to construction of “green” objects, “green” construction technologies, “green” innovative materials and structures.

Qualitative content analysis from the lean construction perspective ...

African Journals Online (AJOL)

'how organisations working together' overcome complexities and deliver value ... Dr Fidelis A. Emuze, Research Associate, Built Environment Research Centre .... applications in construction. Safety. Safety systems in construction. Logistics.

The Construction Solid Waste Minimization Practices among Malaysian Contractors

Directory of Open Access Journals (Sweden)

Che Ahmad A.

2014-01-01

Full Text Available The function of minimization of construction solid waste is to reduce or eliminates the adverse impacts on the environment and to human health. Due to the increase of population that leads to rapid development, there are possibilities of construction solid waste to be increased shortly from the construction works, demolition or renovation works. Materials such as wood, concrete, paint, brick, roofing, tiles, plastic and any other materials would contribute problem involving construction solid waste. Therefore, the proper waste minimization is needed to control the quantity of construction solid waste produced. This paper identifies the type of construction solid waste produced and discusses the waste minimization practice by the contractors at construction sites in Selangor, Kuala Lumpur and Putrajaya, Malaysia.

Tank Operations Contract Construction Management Methodology. Utilizing The Agency Method Of Construction Management To Safely And Effectively Complete Nuclear Construction Work

International Nuclear Information System (INIS)

Leso, K.F.; Hamilton, H.M.; Farner, M.; Heath, T.

2010-01-01

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small

TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT TO SAFELY AND EFFECTIVELY COMPLETE NUCLEAR CONSTRUCTION WORK

Energy Technology Data Exchange (ETDEWEB)

LESO KF; HAMILTON HM; FARNER M; HEATH T

2010-01-14

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business construction subcontractors while performing high hazard work in a safe and productive manner. Previous to the Washington River Protection Solutions, LLC contract, Construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper describes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method. This method was implemented in the first quarter of Fiscal Year (FY) 2009, where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted directly by WRPS to small or disadvantaged contractors that are mentored and supported by DRS personnel. Each small

Urban wastewater process by aerobic constructed wetland; Depuracion de aguas residuales urbanas utilizando un humedal artificial aerobio

Energy Technology Data Exchange (ETDEWEB)

Gil Rodriguez, M.

2007-07-01

In this paper the experiences of urban wastewater treatment are shown in an aerobic constructed wetland, using phragmites australis.They were carried out changes on the design and operation of aerobic constructed wetlands of subsurface flow, in order to increase denitrification and biodegradation rate and to diminish the surface of the installation. the flow was channeled through a long and narrow channel to get bigger biodegradation rate to approach to the plug flow performance. the active space of process consists of two sites, one first anoxic in which denitrification takes place, and in the other one the wetland in oxygenated environment the organic matters of the wastewater are consumed by biodegradation and it takes place nitrification, and utilization of nitrates and phosphates by the vegetable culture. (Author) 14 refs.

Radiation environmental impact assessment of radioactive substances of an airport transit storage construction projects

International Nuclear Information System (INIS)

Zhang Baozeng; Xia Zitong; Zou Zhaozhuang

2014-01-01

Radioactive substances belong to dangerous goods transport aviation. Radioactive substances impoundments construction purpose is to ensure that the radioactive material during transport to transport and the public to achieve full or isolation, the effects of radiation on the human body, property and the environment caused by the control to an acceptable level. According to the relevant national standards and norms, for radiation protection evaluation of project construction of an airport radioactive impoundments, feasibility of the construction project radiation environment. (authors)

Assessment of noise environment during construction of a major bridge and associated approach road.

Science.gov (United States)

Roy, T K; Mukhopadhyay, A R; Ghosh, S K; Majumder, G

2011-10-01

In this paper a methodology to quantify the noise environment, during a major bridge construction and upgrading approach road connectivity, has been provided. Noise levels were monitored at eleven sites. These eleven sites have been classified into three categories - commercial, residential and silence zones. The study was carried out to measure the ambient noise levels in all the eleven sites falling in the above three categories during both day and night times considering both "working" and "non-working" days. It was found that the mean noise level during night time was more, compared to that during day time for commercial, residential as well as silence zones. The likely causes of more noise during night time have been explored. Appropriate remedial measures have been suggested to reduce the noise levels. In addition, the noise levels in the above three zones have been compared, wherever feasible statistically, with the respective zonal standards. Significance has been found in all the cases. The underlying causes and remedies have been provided.

Construction Project Leadership from the Perspective of Islam

OpenAIRE

MUHAMAD ROSDI SENAM; KHAIRUDDIN ABDUL RASHID; AZILA AHMAD SARKAWI; RAPIAH MOHD. ZAINI

2014-01-01

Construction industry is continuously being accused with common issues such as low performance, corruptions, spillages, bad practices in addition to common project failures despite advances in project management tools and techniques. This further adds to the existing and increasing complex and multi-facets business environment in construction projects that has resulted in the increasing pressure and challenges faced by project leaders and project managers today. Researchers in project managem...

Development of the construction industry in the trend of attention to the formation of the urban environment promotion

Science.gov (United States)

Maximova, Ekaterina

2017-10-01

Creation of the new image of cities becomes an important modern tendency. Foreign experience creation of the comfortable living conditions for the urban population could show the improvement of many social indicators of the society development. Existence of the positive result from the renovation of city territories performance in Russia can be indicated on the example of the city of Moscow. This article shows the tasks which state plans to create for the comfortable urban environment. In this regard, the directions of the development of the construction industry, which allow to increase the level of business activity are shown.

BIM and GIS for low-disturbance construction

NARCIS (Netherlands)

Sebastian, R.; Böhms, H.M.; Helm, P.W. van den

2013-01-01

Construction and maintenance activities of bridges often bring negative impacts to the urban environment in terms of disturbance, traffic jams and disruptions, noise, dust, and air pollution. Lack of coordination between the stakeholders in strategic, tactical and operational construction planning

Tailoring silver nanoparticle construction using dendrimer templated silica networks

International Nuclear Information System (INIS)

Liu Xiaojun; Kakkar, Ashok

2008-01-01

We have examined the role of the internal environment of dendrimer templated silica networks in tailoring the construction of silver nanoparticle assemblies. Silica networks from which 3,5-dihydroxybenzyl alcohol based dendrimer templates have been completely removed, slowly wet with an aqueous solution of silver acetate. The latter then reacts with internal silica silanol groups, leading to chemisorption of silver ions, followed by the growth of silver oxide nanoparticles. Silica network constructed using generation 4 dendrimer contains residual dendrimer template, and mixes with aqueous silver acetate solution easily. Upon chemisorption, silver ions get photolytically reduced to silver metal under a stabilizing dendrimer environment, leading to the formation of silver metal nanoparticles

Tank Operations Contract Construction Management Methodology. Utilizing The Agency Method Of Construction Management

International Nuclear Information System (INIS)

Lesko, K.F.; Berriochoa, M.V.

2010-01-01

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, 'Management of Construction Projects, A Constructor's Perspective', University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are subcontracted

TANK OPERATIONS CONTRACT CONSTRUCTION MANAGEMENT METHODOLOGY UTILIZING THE AGENCY METHOD OF CONSTRUCTION MANAGEMENT

Energy Technology Data Exchange (ETDEWEB)

LESKO KF; BERRIOCHOA MV

2010-02-26

Washington River Protection Solutions, LLC (WRPS) has faced significant project management challenges in managing Davis-Bacon construction work that meets contractually required small business goals. The unique challenge is to provide contracting opportunities to multiple small business constructioin subcontractors while performing high hazard work in a safe and productive manner. Previous to the WRPS contract, construction work at the Hanford Tank Farms was contracted to large companies, while current Department of Energy (DOE) Contracts typically emphasize small business awards. As an integral part of Nuclear Project Management at Hanford Tank Farms, construction involves removal of old equipment and structures and installation of new infrastructure to support waste retrieval and waste feed delivery to the Waste Treatment Plant. Utilizing the optimum construction approach ensures that the contractors responsible for this work are successful in meeting safety, quality, cost and schedule objectives while working in a very hazardous environment. This paper descirbes the successful transition from a traditional project delivery method that utilized a large business general contractor and subcontractors to a new project construction management model that is more oriented to small businesses. Construction has selected the Agency Construction Management Method (John E Schaufelberger, Len Holm, "Management of Construction Projects, A Constructor's Perspective", University of Washington, Prentice Hall 2002). This method was implemented in the first quarter of Fiscal Year 2009 (FY2009), where Construction Management is performed by substantially home office resources from the URS Northwest Office in Richland, Washington. The Agency Method has allowed WRPS to provide proven Construction Managers and Field Leads to mentor and direct small business contractors, thus providing expertise and assurance of a successful project. Construction execution contracts are

ENVIRONMENTAL PROTECTION DURING CONSTRUCTION OF MOTORWAYS

OpenAIRE

Chrzan, Tadeusz

2001-01-01

In this paper given and analysed are the factors related to the construction of motorways and having a negative impact on the environment. Given are the conditions o f the assessment of the impact of the motorways on the environment, arable land andforests and cultural heritage.

The role of internal and external constructive processes in evolution

Science.gov (United States)

Laland, Kevin; Odling-Smee, John; Turner, Scott

2014-01-01

The architects of the Modern Synthesis viewed development as an unfolding of a form already latent in the genes. However, developing organisms play a far more active, constructive role in both their own development and their evolution than the Modern Synthesis proclaims. Here we outline what is meant by constructive processes in development and evolution, emphasizing how constructive development is a shared feature of many of the research developments central to the developing Extended Evolutionary Synthesis. Our article draws out the parallels between constructive physiological processes expressed internally and in the external environment (niche construction), showing how in each case they play important and not fully recognized evolutionary roles by modifying and biasing natural selection. PMID:24591574

Integrating building information modeling and health and safety for onsite construction.

Science.gov (United States)

Ganah, Abdulkadir; John, Godfaurd A

2015-03-01

Health and safety (H&S) on a construction site can either make or break a contractor, if not properly managed. The usage of Building Information Modeling (BIM) for H&S on construction execution has the potential to augment practitioner understanding of their sites, and by so doing reduce the probability of accidents. This research explores BIM usage within the construction industry in relation to H&S communication. In addition to an extensive literature review, a questionnaire survey was conducted to gather information on the embedment of H&S planning with the BIM environment for site practitioners. The analysis of responses indicated that BIM will enhance the current approach of H&S planning for construction site personnel. From the survey, toolbox talk will have to be integrated with the BIM environment, because it is the predominantly used procedure for enhancing H&S issues within construction sites. The advantage is that personnel can visually understand H&S issues as work progresses during the toolbox talk onsite.

TEPCO plans to construct Higashidori Nuclear Power Station

International Nuclear Information System (INIS)

Tsuruta, Atsushi

2008-01-01

In 2006, TEPCO submitted to the government plans for the construction of Higashidori Nuclear Power Station. The application was filed 41 years after the project approved by the Higashidori Village Assembly. This nuclear power station will be the first new nuclear power plant constructed by TEPCO since the construction of Units No.6 and 7 at the Kashiwazaki Kariwa Nuclear Power Station 18 years ago. Higashidori Nuclear Power Station is to be constructed at a completely new site, which will become the fourth TEPCO nuclear power station. Higashidori Nuclear Power Station Unit No.1 will be TEPCO's 18th nuclear reactor. Unit No.1 will be an advanced boiling water reactor (ABWR), a reactor-type with a proven track record. It will be TEPCO's third ABWR. Alongside incorporating the latest technology, in Higashidori Nuclear Power Station Unit No.1, the most important requirement is for TEPCO to reflect in the new unit information and experience acquired from the operation of other reactors (information and experience acquired through the experience of operating TEPCO's 17 units at Fukushima Daiichi Nuclear Power Station, Fukushima Daini Nuclear Power Station and Kashiwazaki Kashiwa Nuclear Power Station in addition to information on non-conformities at nuclear power stations in Japan and around the world). Higashidori Nuclear Power Station is located in Higashidori-Village (Aomori Prefecture) and the selected site includes a rich natural environment. From an environmental perspective, we will implement the construction with due consideration for the land and sea environment, aiming to ensure that the plant can co-exist with its natural surroundings. The construction plans are currently being reviewed by the Nuclear and Industrial Safety Agency. We are committed to making progress in the project for the start of construction and subsequent commercial operation. (author)

Constructing Learning-by-Doing Pedagogical Model for Delivering 21st Century Engineering Education

Directory of Open Access Journals (Sweden)

Ghassan Frache

2018-01-01

Full Text Available The United Arab Emirates (UAE is dedicated to establishing the best teaching and learning environment for students and staff across all higher education institutions. To heed this call, the engineering division adopted the Learning-by-Doing (LBD pedagogical philosophy for 21st Century education at the heart of its strategic directions. This study intends to explore how LBD is understood and practiced in UAE colleges and how 21st Century skills can be explicitly incorporated into its engineering curriculum by using constructive alignment as a pattern for instructional design. This work intends to investigate the general question: “What constructively aligned Learning-by-Doing pedagogical model, with the incorporation of 21st Century skills, needs to be developed to effectively teach and prepare engineering students at the Higher College of Technology, UAE for successful long-term employment in the global working economy?”. Using mixed method research design and input from its major stakeholders, student survey questionnaires, engineering instructors and dean structured interviews, overt class observation and syllabi examination have all been utilized for data triangulation. In conclusion, the study developed a collaborative LBD model tailor-fitted to the institution’s engineering program and to UAE’s culture.

Toru to Nukui dam construction carried out by Chugoku district construction department of Ministry of construction. Kensetsusho chugoku chiho kensetsukyoku Nukui dam koji kengakuki

Energy Technology Data Exchange (ETDEWEB)

Kitajima, E. (Chugoku Kayaku Co. Ltd. Hiroshima (Japan))

1993-08-31

This paper reports the summary of a tour to the Nukui dam being constructed on the Ota river system in Hiroshima Prefecture, as a study activity of the blasting expert working group. The Nukui dam has the second highest embankment in Japan (155 m). It adjusts flood at 1800 m[sup 3]/s from the planned high water discharge of 2900 m[sup 3]/s supplies water of 200,000 m[sup 3] daily at maximum, and generates electric power of 2300 kW as the maximum output. The blasting adopted a presplit system not to damage base rock beds, and was used with a bench height of 5 m, a hole diameter of 75 mm, a minimum shaft line of 2.5 m, and a hole distance of 2.8m. The main explosive used was the ANFO, No. 3 Kiri, Akatsuki dynamite. Slurry explosives were used for the presplit. Drilling machines with three-dimensional computers were used. The 'Nukui Dam Work Station' is the country's first site office/lodgings integrated facility offering as comfortable working environment as a city hotel. The facility is expected to wipe out the dirty, dangerous and hard image of construction work. 1 ref., 3 figs.

Heuristic Environments

Directory of Open Access Journals (Sweden)

Ines Giunta

2011-10-01

Full Text Available The purpose of this research is the identification of a paradigm which fixes the basic concepts and the type of logical relationships between them, whereby direct, govern and evaluate choises on new technologies. The contribution is based on the assumption that the complexity of knowledge is correlated with the complexity of the learning environment. From the existence of this correlation will descend a series of consequences that contribute to the definition of a theoretical construct in which the logical categories of learning become the guiding criteria on which to design learning environments and, consequently, also the indicators on by which to evaluate its effectiveness.

ABCDEFG IS - the principle of constructive feedback.

Science.gov (United States)

Bhattarai, M

2007-01-01

Feedback is an integral part of any learning experience. Constructive feedback is a powerful instrument and facilitates the learner's professional and personal development. "ABCDEFG IS", a mnemonic for the principles of constructive feedback, stands for Amount of the information, Benefit of the trainees, Change behaviour, Descriptive language, Environment, Focused, Group check, Interpretation check, and Sharing information. The eight important steps of feedback are: Ensure prior information, Collect data, Make appropriate meeting arrangement, Begin by encouraging self assessment by the trainee, Highlight areas where the trainee is doing well, Give feedback, Handle reaction maintaining the dignity and Plan actions. Communication and reflection also share many of the principles and steps of constructive feedback and giving regular feedback, thus, helps to improve communication and reflection. The feedback provider would be able to provide genuine feedback by following the appropriate steps and principles of constructive feedback and realize how important and rewarding its role is in teaching learning activities.

Sustainable Entrepreneurship in the Dutch Construction Industry

NARCIS (Netherlands)

Klein Woolthuis, R.J.A.

2010-01-01

This article discusses the strategies that sustainable entrepreneurs use to interact with their environment in the Dutch construction industry. The Dutch construction industry is under great pressure to move towards sustainability, and entrepreneurs are believed to be able to play a large role in

Sustainable entrepreneurship in the Dutch construction industry

NARCIS (Netherlands)

Klein Woolthuis, R.J.A.

2010-01-01

This article discusses the strategies that sustainable entrepreneurs use to interact with their environment in the Dutch construction industry. The Dutch construction industry is under great pressure to move towards sustainability, and entrepreneurs are believed to be able to play a large role in

Can a Hypermedia Cooperative e-Learning Environment Stimulate Constructive Collaboration?

Science.gov (United States)

Pragnell, Mary Victoria; Roselli, Teresa; Rossano, Veronica

2006-01-01

The growing use of the Internet in learning environments has led to new models being created addressing specific learning domains, as well as more general educational goals. In particular, in recent years considerable attention has been paid to collaborative learning supported by technology, because this mode can enhance peer interaction and group…

Human annoyance, acceptability and concern as responses to vibration from the construction of Light Rapid Transit lines in residential environments

Energy Technology Data Exchange (ETDEWEB)

Wong-McSweeney, D., E-mail: D.B.C.WongMcSweeney@salford.ac.uk [Acoustics Research Centre, University of Salford, Salford M5 4TW (United Kingdom); Woodcock, J.S.; Peris, E.; Waddington, D.C.; Moorhouse, A.T. [Acoustics Research Centre, University of Salford, Salford M5 4TW (United Kingdom); Redel-Macías, M.D. [Dep. Rural Engineering Campus de Rabanales, University of Córdoba, Córdoba (Spain)

2016-10-15

The aim of this paper is to investigate the use of different self-reported measures for assessing the human response to environmental vibration from the construction of an urban LRT (Light Rapid Transit) system. The human response to environmental stressors such as vibration and noise is often expressed in terms of exposure–response relationships that describe annoyance as a function of the magnitude of the vibration. These relationships are often the basis of noise and vibration policy and the setting of limit values. This paper examines measures other than annoyance by expressing exposure–response relationships for vibration in terms of self-reported concern about property damage and acceptability. The exposure–response relationships for concern about property damage and for acceptability are then compared with those for annoyance. It is shown that concern about property damage occurs at vibration levels well below those where there is any risk of damage. Earlier research indicated that concern for damage is an important moderator of the annoyance induced. Acceptability, on the other hand, might be influenced by both annoyance and concern, as well as by other considerations. It is concluded that exposure–response relationships expressing acceptability as a function of vibration exposure could usefully complement existing relationships for annoyance in future policy decisions regarding environmental vibration. The results presented in this paper are derived from data collected through a socio-vibration survey (N = 321) conducted for the construction of an urban LRT in the United Kingdom. - Highlights: • The human response to construction vibration is assessed in residential environments. • Exposure–response relationships are generated based on survey and semi-empirical vibration estimation. • Annoyance, concern and acceptability are compared as response measures. • Concern and acceptability are viable measures complementing annoyance.

Architects' perspectives on construction waste reduction by design.

Science.gov (United States)

Osmani, M; Glass, J; Price, A D F

2008-01-01

The construction, demolition and excavation waste arising in England was estimated at 91 million tonnes in 2003. The current thinking on construction waste minimisation is heavily focussed on several issues relating to physical construction waste and recycling guides. Indeed, much had been published on ways to improve on-site waste management and recycling activities but very few attempts made to address the effect of design practices on waste generation. However, there is a consensus in the literature that the architect has a decisive role to play in helping to reduce waste by focussing on designing out waste. This paper examines previous studies on architects' approach towards construction waste minimisation; and by means of a postal questionnaire, investigates: the origins of waste; waste minimisation design practices in the UK; and responsibilities and barriers within the UK architectural profession. The findings reveal that waste management is not a priority in the design process. Additionally, the architects seemed to take the view that waste is mainly produced during site operations and rarely generated during the design stages; however, about one-third of construction waste could essentially arise from design decisions. Results also indicate that a number of constraints, namely: lack of interest from clients; attitudes towards waste minimisation; and training all act as disincentives to a proactive and sustainable implementation of waste reduction strategies during the design process.

Architects' perspectives on construction waste reduction by design

International Nuclear Information System (INIS)

Osmani, M.; Glass, J.; Price, A.D.F.

2008-01-01

The construction, demolition and excavation waste arising in England was estimated at 91 million tonnes in 2003. The current thinking on construction waste minimisation is heavily focussed on several issues relating to physical construction waste and recycling guides. Indeed, much had been published on ways to improve on-site waste management and recycling activities but very few attempts made to address the effect of design practices on waste generation. However, there is a consensus in the literature that the architect has a decisive role to play in helping to reduce waste by focussing on designing out waste. This paper examines previous studies on architects' approach towards construction waste minimisation; and by means of a postal questionnaire, investigates: the origins of waste; waste minimisation design practices in the UK; and responsibilities and barriers within the UK architectural profession. The findings reveal that waste management is not a priority in the design process. Additionally, the architects seemed to take the view that waste is mainly produced during site operations and rarely generated during the design stages; however, about one-third of construction waste could essentially arise from design decisions. Results also indicate that a number of constraints, namely: lack of interest from clients; attitudes towards waste minimisation; and training all act as disincentives to a proactive and sustainable implementation of waste reduction strategies during the design process

Construction safety program for the National Ignition Facility

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF's management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES ampersand H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES ampersand H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES ampersand H support organizations and administrative groups, and describes their interactions with the NIF Program

Construction safety program for the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF`s management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES&H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES&H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES&H support organizations and administrative groups, and describes their interactions with the NIF Program.

Risk management in public sector construction projects: Case ...

African Journals Online (AJOL)

a project environment. Since projects are complicated, experience ... work, delays trigger cost overruns in construction projects (African. Development Bank ..... quantity surveying, contract management, and engineering. Table 4: Research ..... professionals at the business and operational levels of construction management.

The Factors Influence Intrapreneurship Behavior In Construction Company

Directory of Open Access Journals (Sweden)

Rojuaniah

2015-08-01

Full Text Available The intrapreneur is a person who focuses on innovation and creativity and who transforms a dream or an idea into a profitable business within the corporate environment. Intrapreneur spirited employees willing to take the risks and responsibility for their own decisions for all situational. This study aims to develop a conceptual model of intrapreneurship behavior by discussing the concepts and phenomena that occur in the construction company. The proposed model is intended to describe the phenomenon of the main factors intrapreneurship behavior in the construction company. This paper presents a model of the intrapreneurship behavior where factors are sourced from both internal and external organization. This paper provides a comprehensive analysis of existing models to develop a systematic approach to the process of formation of intrapreneurship behavior in organization. The results are a combination of study of various scientific papers interviews to the practician in the construction business and resume of all questioners especially in the construction company. The results can be a framework that can help organizations to identify potential strategies that could help intrapreneurial development. Based on the analysis results we found eight 8 factors that can develop employees intrapreneurship behavior on the construction companies. The eight 8 factors are leadership remuneration organizational culture communication openness work environment career development personal traits and technological aspects.

Maternal-by-environment but not genotype-by-environment interactions in a fish without parental care.

Science.gov (United States)

Vega-Trejo, Regina; Head, Megan L; Jennions, Michael D; Kruuk, Loeske E B

2018-01-01

The impact of environmental conditions on the expression of genetic variance and on maternal effects variance remains an important question in evolutionary quantitative genetics. We investigate here the effects of early environment on variation in seven adult life history, morphological, and secondary sexual traits (including sperm characteristics) in a viviparous poeciliid fish, the mosquitofish Gambusia holbrooki. Specifically, we manipulated food availability during early development and then assessed additive genetic and maternal effects contributions to the overall phenotypic variance in adults. We found higher heritability for female than male traits, but maternal effects variance for traits in both sexes. An interaction between maternal effects variance and rearing environment affected two adult traits (female age at maturity and male size at maturity), but there was no evidence of trade-offs in maternal effects across environments. Our results illustrate (i) the potential for pre-natal maternal effects to interact with offspring environment during development, potentially affecting traits through to adulthood and (ii) that genotype-by-environment interactions might be overestimated if maternal-by-environment interactions are not accounted for, similar to heritability being overestimated if maternal effects are ignored. We also discuss the potential for dominance genetic variance to contribute to the estimate of maternal effects variance.

Air Force construction automation/robotics

Science.gov (United States)

Nease, AL; Dusseault, Christopher

1994-01-01

The Air Force has several unique requirements that are being met through the development of construction robotic technology. The missions associated with these requirements place construction/repair equipment operators in potentially harmful situations. Additionally, force reductions require that human resources be leveraged to the maximum extent possible and that more stringent construction repair requirements push for increased automation. To solve these problems, the U.S. Air Force is undertaking a research and development effort at Tyndall AFB, FL to develop robotic teleoperation, telerobotics, robotic vehicle communications, automated damage assessment, vehicle navigation, mission/vehicle task control architecture, and associated computing environment. The ultimate goal is the fielding of robotic repair capability operating at the level of supervised autonomy. The authors of this paper will discuss current and planned efforts in construction/repair, explosive ordnance disposal, hazardous waste cleanup, fire fighting, and space construction.

An environmental impact causal model for improving the environmental performance of construction processes

OpenAIRE

Fuertes Casals, Alba; Casals Casanova, Miquel; Gangolells Solanellas, Marta; Forcada Matheu, Núria; Macarulla Martí, Marcel; Roca Ramon, Xavier

2013-01-01

Despite the increasing efforts made by the construction sector to reduce the environmental impact of their processes, construction sites are still a major source of pollution and adverse impacts on the environment. This paper aims to improve the understanding of construction-related environmental impacts by identifying on-site causal factors and associated immediate circumstances during construc- tion processes for residential building projects. Based on the literature and focus g...

Developing a system dynamics model to analyse environmental problem in construction site

Science.gov (United States)

Haron, Fatin Fasehah; Hawari, Nurul Nazihah

2017-11-01

This study aims to develop a system dynamics model at a construction site to analyse the impact of environmental problem. Construction sites may cause damages to the environment, and interference in the daily lives of residents. A proper environmental management system must be used to reduce pollution, enhance bio-diversity, conserve water, respect people and their local environment, measure performance and set targets for the environment and sustainability. This study investigates the damaging impact normally occur during the construction stage. Environmental problem will cause costly mistake in project implementation, either because of the environmental damages that are likely to arise during project implementation, or because of modification that may be required subsequently in order to make the action environmentally acceptable. Thus, findings from this study has helped in significantly reducing the damaging impact towards environment, and improve the environmental management system performance at construction site.

Carbon footprint of construction using industrialised building system

Science.gov (United States)

Lim, P. Y.; Yahya, K.; Aminudin, E.; Zakaria, R.; Haron, Z.; Mohamad Zin, R.; Redzuan, A. A. H.

2017-11-01

Industrialised Building System (IBS) is more sustainable to the environment as compared to the conventional construction methods. However, the construction industry in Malaysia has low acceptance towards IBS due to the resistance to change and also lack of awareness towards sustainability development. Therefore, it is important to study the amount carbon footprint produced by IBS during its manufacturing and construction stage, and also the amount of carbon footprint produced by one meter square of gross floor area of IBS construction using Life Cycle Assessment (LCA) to ease future research through the comparison of the carbon footprint of IBS with the conventional building system. As a result, a case study on a residential type of construction in the vicinity of Johor Bahru, Malaysia was carried out to obtain the necessary data and result. From the data analysis, the amount of greenhouse gases (GHG) for a residential type IBS construction based on the raw materials and resources involved to manufacture and construct IBS components is 0.127 tonnes fossil CO2Eq per meter square. Raw material that contributed to the most amount of carbon footprint is Ordinary Portland Cement (OPC), followed by steel bars, autoclaved aerated blocks and diesel. The LCA data acquired will be very useful in implementing IBS in the residential type construction. As a result, the awareness towards sustainable construction using IBS can be improved.

Construction Worker Fatigue Prediction Model Based on System Dynamic

Directory of Open Access Journals (Sweden)

Wahyu Adi Tri Joko

2017-01-01

Full Text Available Construction accident can be caused by internal and external factors such as worker fatigue and unsafe project environment. Tight schedule of construction project forcing construction worker to work overtime in long period. This situation leads to worker fatigue. This paper proposes a model to predict construction worker fatigue based on system dynamic (SD. System dynamic is used to represent correlation among internal and external factors and to simulate level of worker fatigue. To validate the model, 93 construction workers whom worked in a high rise building construction projects, were used as case study. The result shows that excessive workload, working elevation and age, are the main factors lead to construction worker fatigue. Simulation result also shows that these factors can increase worker fatigue level to 21.2% times compared to normal condition. Beside predicting worker fatigue level this model can also be used as early warning system to prevent construction worker accident

Organizational culture and a safety-conscious work environment: The mediating role of employee communication satisfaction.

Science.gov (United States)

Silla, Inmaculada; Navajas, Joaquin; Koves, G Kenneth

2017-06-01

A safety-conscious work environment allows high-reliability organizations to be proactive regarding safety and enables employees to feel free to report any concern without fear of retaliation. Currently, research on the antecedents to safety-conscious work environments is scarce. Structural equation modeling was applied to test the mediating role of employee communication satisfaction in the relationship between constructive culture and a safety-conscious work environment in several nuclear power plants. Employee communication satisfaction partially mediated the positive relationships between a constructive culture and a safety-conscious work environment. Constructive cultures in which cooperation, supportive relationships, individual growth and high performance are encouraged facilitate the establishment of a safety-conscious work environment. This influence is partially explained by increased employee communication satisfaction. Constructive cultures should be encouraged within organizations. In addition, managers should promote communication policies and practices that support a safety-conscious work environment. Copyright © 2017 Elsevier Ltd and National Safety Council. All rights reserved.

Generation IV Nuclear Energy Systems Construction Cost Reductions Through the Use of Virtual Environments

International Nuclear Information System (INIS)

Timothy Shaw; Vaugh Whisker

2004-01-01

The objective of this multi-phase project is to demonstrate the feasibility and effectiveness of using full-scale virtual reality simulation in the design, construction, and maintenance of future nuclear power plants. The project will test the suitability of immersive virtual reality technology to aid engineers in the design of the next generation nuclear power plant and to evaluate potential cost reductions that can be realized by optimization of installation and construction sequences. The intent is to see if this type of information technology can be used in capacities similar to those currently filled by full-scale physical mockups. This report presents the results of the completed project

Generation IV Nuclear Energy Systems Construction Cost Reductions Through the Use of Virtual Environments

Energy Technology Data Exchange (ETDEWEB)

Timothy Shaw; Vaugh Whisker

2004-02-28

The objective of this multi-phase project is to demonstrate the feasibility and effectiveness of using full-scale virtual reality simulation in the design, construction, and maintenance of future nuclear power plants. The project will test the suitability of immersive virtual reality technology to aid engineers in the design of the next generation nuclear power plant and to evaluate potential cost reductions that can be realized by optimization of installation and construction sequences. The intent is to see if this type of information technology can be used in capacities similar to those currently filled by full-scale physical mockups. This report presents the results of the completed project.

The role of internal and external constructive processes in evolution.

Science.gov (United States)

Laland, Kevin; Odling-Smee, John; Turner, Scott

2014-06-01

The architects of the Modern Synthesis viewed development as an unfolding of a form already latent in the genes. However, developing organisms play a far more active, constructive role in both their own development and their evolution than the Modern Synthesis proclaims. Here we outline what is meant by constructive processes in development and evolution, emphasizing how constructive development is a shared feature of many of the research developments central to the developing Extended Evolutionary Synthesis. Our article draws out the parallels between constructive physiological processes expressed internally and in the external environment (niche construction), showing how in each case they play important and not fully recognized evolutionary roles by modifying and biasing natural selection. © 2014 The Authors. The Journal of Physiology © 2014 The Physiological Society.

Removing Dams, Constructing Science: Coproduction of Undammed Riverscapes by Politics, Finance, Environment, Society and Technology

Directory of Open Access Journals (Sweden)

Zbigniew J. Grabowski

2017-10-01

Full Text Available Dam removal in the United States has continued to increase in pace and scope, transitioning from a dam-safety engineering practice to an integral component of many large-scale river restoration programmes. At the same time, knowledge around dam removals remains fragmented by disciplinary silos and a lack of knowledge transfer between communities of practice around dam removal and academia. Here we argue that dam removal science, as a study of large restoration-oriented infrastructure interventions, requires the construction of an interdisciplinary framework to integrate knowledge relevant to decision-making on dam removal. Drawing upon infrastructure studies, relational theories of coproduction of knowledge and social life, and advances within restoration ecology and dam removal science, we present a preliminary framework of dams as systems with irreducibly interrelated political, financial, environmental, social, and technological dimensions (PFESTS. With this framework we analyse three dam removals occurring over a similar time period and within the same narrow geographic region (the Mid-Columbia Region in WA and OR, USA to demonstrate how each PFESTS dimension contributed to the decision to remove the dam, how it affected the process of removing the dam, and how those dimensions continue to operate post removal in each watershed. We conclude with a discussion of a joint research and practice agenda emerging out of the PFESTS framing.

Niche construction, sources of selection and trait coevolution.

Science.gov (United States)

Laland, Kevin; Odling-Smee, John; Endler, John

2017-10-06

Organisms modify and choose components of their local environments. This 'niche construction' can alter ecological processes, modify natural selection and contribute to inheritance through ecological legacies. Here, we propose that niche construction initiates and modifies the selection directly affecting the constructor, and on other species, in an orderly, directed and sustained manner. By dependably generating specific environmental states, niche construction co-directs adaptive evolution by imposing a consistent statistical bias on selection. We illustrate how niche construction can generate this evolutionary bias by comparing it with artificial selection. We suggest that it occupies the middle ground between artificial and natural selection. We show how the perspective leads to testable predictions related to: (i) reduced variance in measures of responses to natural selection in the wild; (ii) multiple trait coevolution, including the evolution of sequences of traits and patterns of parallel evolution; and (iii) a positive association between niche construction and biodiversity. More generally, we submit that evolutionary biology would benefit from greater attention to the diverse properties of all sources of selection.

Construction of the main building network environment in IHEP

International Nuclear Information System (INIS)

Wang Yanming

2004-01-01

Based on the new network structure at IHEP, we re-constructed the network in Main Building at IHEP in order to realize the goal of steadily supporting the network application. We chose high performance and administrable switches and configured them properly. This improved that the network security, management ability. So the network at Main Building became more safe, steady, reliable and high-efficient. (authors)

Construction time of PWRs

International Nuclear Information System (INIS)

Moreira, João M.L.; Gallinaro, Bruno; Carajilescov, Pedro

2013-01-01

The construction time of PWRs is studied considering published data about nuclear power plants in the world. For the 268 PWRs in operation in 2010, the mode of the construction time distribution is around 5–6 years, and 80% of the plants were built in less than 120 months. To circumvent the problem of comparing plants with different size we normalized the construction time to plants with 1 GW. We restricted the analysis to 201 PWRs which suffered less from external factors that were beyond the control of the management from 1965 to 2010. The results showed that the normalized construction time did not increase over the years and nor with the plants’ gross power level. The learning rate of the industry regarding normalized construction times showed a reduction with 95% confidence level of about 0.56±0.07 months for each 10 GW of installed capacity. Over the years the normalized construction time decreased and became more predictable. The data showed that countries with more centralized regulatory, construction and operation environments were able to build PWRs in shorter times. Countries less experienced with the nuclear technology built PWRs in longer times. - Highlights: ► The construction time of PWRs is analyzed based on historical data. ► Different factors affecting construction time are considered in the analyses. ► The normalized construction time of PWRs decreased with time and gross power level. ► Countries with more centralized institutions built PWRs more quickly

Construction of Intelligent Virtual Worlds Using a Grammatical Framework

OpenAIRE

López García, Gabriel; Gallego Sánchez, Antonio Javier; Molina-Carmona, Rafael; Compañ, Patricia

2014-01-01

The potential of integrating multiagent systems and virtual environments has not been exploited to its whole extent. This paper proposes a model based on grammars, called Minerva, to construct complex virtual environments that integrate the features of agents. A virtual world is described as a set of dynamic and static elements. The static part is represented by a sequence of primitives and transformations and the dynamic elements by a series of agents. Agent activation and communication is a...

Smile (System/Machine-Independent Local Environment)

Energy Technology Data Exchange (ETDEWEB)

Fletcher, J.G.

1988-04-01

This document defines the characteristics of Smile, a System/machine-independent local environment. This environment consists primarily of a number of primitives (types, macros, procedure calls, and variables) that a program may use; these primitives provide facilities, such as memory allocation, timing, tasking and synchronization beyond those typically provided by a programming language. The intent is that a program will be portable from system to system and from machine to machine if it relies only on the portable aspects of its programming language and on the Smile primitives. For this to be so, Smile itself must be implemented on each system and machine, most likely using non-portable constructions; that is, while the environment provided by Smile is intended to be portable, the implementation of Smile is not necessarily so. In order to make the implementation of Smile as easy as possible and thereby expedite the porting of programs to a new system or a new machine, Smile has been defined to provide a minimal portable environment; that is, simple primitives are defined, out of which more complex facilities may be constructed using portable procedures. The implementation of Smile can be as any of the following: the underlying software environment for the operating system of an otherwise {open_quotes}bare{close_quotes} machine, a {open_quotes}guest{close_quotes} system environment built upon a preexisting operating system, an environment within a {open_quotes}user{close_quotes} process run by an operating system, or a single environment for an entire machine, encompassing both system and {open_quotes}user{close_quotes} processes. In the first three of these cases the tasks provided by Smile are {open_quotes}lightweight processes{close_quotes} multiplexed within preexisting processes or the system, while in the last case they also include the system processes themselves.

Green Construction in Building Renovation

Directory of Open Access Journals (Sweden)

Ksit Barbara

2016-06-01

Full Text Available Modern materials and construction solutions draw more and more attention to ecology and building certification. Among the criteria appearing in revitalization, an important element is bringing plants back into heavily urbanized areas. In its natural form, this is not possible to carry out everywhere, often requiring large amounts of space. Nowadays, however, there are a number of green roofs and green wall systems, allowing “greener” construction without making significant changes in the urban environment.

Environment-friendly sustainable construction of houses; Duurzaam bouwen kan milieuvriendelijker

Energy Technology Data Exchange (ETDEWEB)

Klunder, G. [Onderzoeksinstituut OTB, Technische Universiteit Delft, Delft (Netherlands)

2003-02-01

An overview is given of the most important results of a study on the environmental effects of sustainable construction of residential buildings. [Dutch] Een overzicht wordt gegeven van de belangrijkste resultaten van een onderzoek naar de milieuvriendelijkheid van duurzaam bouwen.

Use of cost-effective construction technologies in India to mitigate climate change

Energy Technology Data Exchange (ETDEWEB)

Sengupta, N. [Forum of Scientists, Engineers and Technologists, Kolkata (India)

2008-01-10

Concentration of greenhouse gases plays a major role in raising the earth's temperature. Carbon dioxide, produced from burning of fossil fuels, is the principle greenhouse gas and efforts are being made at international level to reduce its emission through adoption of energy-efficient technologies. The UN Conference on Environment and Development, 1992 made a significant development in this field by initiating the discussion on sustainable development under the Agenda 21. Cost-effective construction technologies can bring down the embodied energy level associated with production of building materials by lowering use of energy-consuming materials. This embodied energy is a crucial factor for sustainable construction practices and effective reduction of the same would contribute in mitigating global warming. The cost-effective construction technologies would emerge as the most acceptable case of sustainable technologies in India both in terms of cost and environment.

Characterization of civil construction waste and its incorporation to mortar

International Nuclear Information System (INIS)

Cunha, G.A.; Andrade, A.C.D.; Souza, J.M.M.; Evangelista, A.C.J.; Almeida, V.C.

2009-01-01

As the preservation of the environment is a big concern nowadays, plenty of studies have arisen in order to decrease the production or reuse the waste from human activities. In this context, the civil construction industry comes up, as it is able to incorporate waste to mortar, being a great alternative for the reuse of solid waste. The scope of this work has been the characterization of Construction and Demolishment Waste (RCD) and its incorporation to the mortar aiming at the development of alternative construction materials in the future for the economical reutilization of waste discharged in embankments and landfills so far preserving the environment so far. The experimental studies taken with sample bodies, such as water absorption, resistance to compression, X-ray diffraction, X-ray fluorescence and scanning electronic microscopy, elicits the viability of the partial substitution of cement by RCD mixed waste, taking its different applications into consideration. (author)

A two-phase moisture transport model accounting for sorption hysteresis in layered porous building constructions

DEFF Research Database (Denmark)

Johannesson, Björn; Janz, Mårten

2009-01-01

Building constructions most commonly consists of layered porous materials such as masonry on bricks. The moisture distribution and its variations due to change in surrounding environment is of special interest in such layered construction since materials adsorb different amounts of water and exhi......Building constructions most commonly consists of layered porous materials such as masonry on bricks. The moisture distribution and its variations due to change in surrounding environment is of special interest in such layered construction since materials adsorb different amounts of water....... The model is developed by carefully examining the mass balance postulates for the two considered constituents together with appropriate and suitable constitutive assumptions. A test example is solved by using an implemented implicit finite element code which uses a modified Newton-Raphson scheme to tackle...

Ecological effectiveness as an essential quality requirement of innovational construction

Directory of Open Access Journals (Sweden)

Mkrtchyan Tamara

2017-01-01

Full Text Available Nowadays it seems to be very essential to develop national construction industry by implementation of innovative technologies. As an object of innovational construction «Smart house» or «green building» demonstrates the latest advances in ecological building materials, energy-saving structures and lean-technologies. According to the concept of TQM «green building» has tube compatible with environmental protection, environment sustainability and ecological effectiveness requirements. «Green certification» includes these terms into the National environment sustainability rating system. The main goal of this research work was to review and compare theoretical models and concepts of effectiveness and analyze their applicability to determine the term ecological effectiveness as the main Quality Score.

Quality Management System at Construction Project: A Questionnaire Survey

OpenAIRE

P.P.Mane; J.R.Patil

2015-01-01

The best quality, time and cost are the important aspects of successful construction project which fulfills the main goal of construction industry. The quality management has to provide the environment within which related tools, techniques and procedures can be deployed effectively leading to operational success for a construction project. The role of quality management for a construction company is not an isolated activity, but intertwined with all the operational and managerial...

AT HOME IN HOSPITAL? COMPETING CONSTRUCTIONS OF HOSPITAL ENVIRONMENTS

Directory of Open Access Journals (Sweden)

Peter Kellett

2009-03-01

Full Text Available Large institutions housed in large buildings are frequently regarded as the antithesis of personalised, small scale, domestic, home environments. However the attribute of ‘homeliness’ appears to be used more broadly to describe places where people feel a sense of attachment, control and identification. In a large multi-disciplinary study of a hospital rebuilding project in northern England a range of users were interviewed to ascertain their responses to the original older buildings and later the new purpose built hospital. We found both staff and patients retained a strong sense of affection for the older buildings and frequently used the language of home to describe their responses. In contrast, the newer buildings were generally recognised as efficient but impersonal, lacking many of the positive qualities they were familiar with. In addition some respondents suggested that despite efforts to include art projects, the new architectural language was inappropriate for healthcare, believing that small scale, ‘home-like’ environments were more conducive to health and well-being. The authors will draw on anthropological and architectural frameworks to analyse the data which consists of extensive interview transcripts complemented by photographs. The paper aims to understand the conceptualisations which underpin the various user responses and to offer a critique of the design language of the current healthcare building programme.

Role of Construction Sector in Economic Growth: Empirical ...

African Journals Online (AJOL)

FUTY Journal of the Environment ... The construction industry plays an important role in the economy, and the activities of the industry are also vital to the achievement of national socio-economic development goals of providing shelter, ... investigate the relationship between the construction sector and aggregate economy.

4D Simulation for Nuclear Power Plant Construction

International Nuclear Information System (INIS)

Jeong, Seo G.; Suh, Kune Y.

2006-01-01

For the timely and competitive response to rapidly changing energy environment at the turn of millennium, there is a desperate need to build the nuclear power plant (NPP) in the virtual reality of digital engineering prior to commissioning. To construct a NPP is a highly integrated, voluminous project. Verification of design and initial planning is prerequisite to construction to confirm optimal fabrication and high productivity. This paper presents the design feasibility by simulating the initial construction plan of NPP using four-dimensional (4D) simulation. The virtual reality method, using three dimensional (3D) computer-aided design (CAD) model, enables various designs in the project launching stage to be promptly and exactly previewed

The environments of Markarian galaxies

International Nuclear Information System (INIS)

Mackenty, J.W.; Simpson, C.; Mclean, B.

1990-01-01

The extensively studied Markarian sample of 1500 ultraviolet excess galaxies contains many Seyfert, starburst, and peculiar galaxies. Using the 20 minute V plates obtained for the construction of the Hubble Space Telescope Guide Star Catalog, the authors investigated the morphologies of the Markarian galaxies and the environments in which they are located. The relationship between the types of nuclear activity and the morphologies and environments of the Markarian galaxies is discussed. The authors conclude that the type of nuclear activity present in the galaxies of the Markarian sample is not dependent on either the morphology or the local environment of the galaxy. This is not to imply that nuclear activity per se is not influenced by the environment in which the nucleus is located. Rather the type of nuclear activity (at least in the Markarian population) does not appear to be determined by the environment

Results of monitoring at Olkiluoto in 2007. Environment

International Nuclear Information System (INIS)

Haapanen, R.

2008-06-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2007. These summary reports have been published since 2005 (target year 2004). The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground characterization facility. Although some of the nuclear power production related monitoring studies by TVO (the power company) have been going on from the 1970s, the repository-related environmental monitoring of Olkiluoto Island has only recently been comprehensive. In the monitoring data, the ongoing construction work (OL3, ONKALO and related infrastructure) is seen for instance in raised noise levels and deposition of base cations and iron. The land-use continues to change, but where there is natural environment, it resembles other coastal locations. The nearby marine environment is affected by the cooling water from the nuclear power plant. (orig.)

ANALYSIS OF THE CONCEPT OF "GREEN" CONSTRUCTION AS A VEHICLE TO ENSURE THE ENVIRONMENTAL SAFETY OF CONSTRUCTION ACTIVITIES

Directory of Open Access Journals (Sweden)

Benuzh Andrey Aleksandrovich

2012-12-01

Full Text Available The authors demonstrate that the number of buildings in the world exceeds one billion according to the statistical data; their potential negative impact on the environment can be disastrous; moreover, the main cause of the ever-growing demand for buildings consists in the constant growth of the world population that makes the global environmental situation even more complicated. As a main conception, the authors focus on the concept of sustainable development. They consider that the core idea of this concept is that the present-day generation should do everything in their power to preserve the natural environment and its resources for the future generations. The authors mention that back in the middle of the 20th century academician V.I. Vernadsky formulated the concept of the noosphere closely linked to the notion of sustainable development. According to the authors, "green" construction can be considered as a vehicle for sustainable development of territories that accommodate construction sites. The authors define "green" construction as a comprehensive system of knowledge structured on the basis of design and construction standards. "Green" buildings demonstrate their high construction quality along with minimal costs and maximal comfort. Although a "green" technology is a new and not the simplest way of development, it has proven its incredible efficiency. The major achievement of the authors consists in the classification of principles, approaches and available technologies that can be applied or are applied in the "green" construction to ensure the environmental safety of construction activities. The authors have also selected environmental, economic and social benefits of "green" construction and provided their recommendations concerning the implementation of "green" technologies in Russia.

Construction of Industrial Ecosystem of an Electric Company under Ecological Perspective

Science.gov (United States)

Li, Xin; Zhang, Yuan; Wu, Han

2018-01-01

Be confronted with more and more fierce competition environment, only by constantly integrating, constructing and restructuring internal and external resources as well as capabilities can enterprises adapt themselves to the rapidly changing environment and maintain the advantages of sustained competition. Business competition has changed from product competition of single enterprise to competition of bussiness ecosystem. Therefore, how to build a business system is the key to win competition. This paper draws lessons from business ecosystem and industrial ecosystem concept and takes the subordinate industry company of a large enterprise as the research object. On the the basis of combing its characteristics and organizational structure, an industrial ecosystem is tired to constructed.

Mass of materials: the impact of designers on construction ergonomics.

Science.gov (United States)

Smallwood, John

2012-01-01

Many construction injuries are musculoskeletal related in the form of sprains and strains arising from the handling of materials, which are specified by designers. The paper presents the results of a study conducted among delegates attending two 'designing for H&S' (DfH&S) seminars using a questionnaire. The salient findings include: the level of knowledge relative to the mass and density of materials is limited; designers generally do not consider the mass and density of materials when designing structures and elements and specifying materials; to a degree designers appreciate that the mass and density of materials impact on construction ergonomics; designers rate their knowledge of the mass and density of materials as limited, and designers appreciate the potential of the consideration of the mass and density of materials to contribute to an improvement in construction ergonomics. Conclusions include: designers lack the requisite knowledge relative to the mass and density of materials; designers are thus precluded from conducting optimum design hazard identification and risk assessments, and tertiary built environment designer education does not enlighten designers relative to construction ergonomics. Recommendations include: tertiary built environment designer education should construction ergonomics; professional associations should raise the level of awareness relative to construction ergonomics, and design practices should include a category 'mass and density of materials' in their practice libraries.

Co-constructing a sustainable built environment in the Netherlands—Dynamics and opportunities in an environmental sectoral innovation system

International Nuclear Information System (INIS)

Faber, Albert; Hoppe, Thomas

2013-01-01

There is considerable scope for energy efficiency improvements to the housing stock in the Netherlands. Although, economically, there are many technological opportunities available, the Dutch built environment has difficulty to harvest this potential. This paper applies a sectoral innovation system approach to investigate this apparent paradox. This approach allows to identify and assess systemic barriers that prevent improvement in overall energy efficiency of the Dutch housing sector. Twenty-one experts were interviewed, and a qualitative data analysis was applied to identify barriers, and relate them to key dimensions in the sectoral innovation system framework. From this analysis, we identified poor regulatory design, lack of market demand, and some institutional characteristics of the construction sector as the key systemic barriers that hamper the diffusion of green energy innovations in the Dutch housing sector. - Highlights: ► Scope for energy efficiency in the Dutch built environment is high but unharvested. ► We investigate this gap with a sectoral systems of innovation approach. ► We collected data through interviews. ► We find that poor regulatory design and lack of market demand are main barriers.

Suppressing decoherence by preparing the environment

International Nuclear Information System (INIS)

Landon-Cardinal, Olivier; MacKenzie, Richard

2013-01-01

To protect a quantum system from decoherence due to interaction with its environment, we investigate the existence of initial states of the environment allowing for decoherence-free evolution of the system. For a class of models in which a two-state system and a dynamical environment interact through a Hamiltonian restricted to be a tensor product, we prove that such states exist if and only if the interaction and self-evolution Hamiltonians of the environment share an eigenstate. If decoherence by state preparation is not possible, we show that initial states minimizing decoherence result from a delicate compromise between the environment and interaction dynamics

38 CFR 52.200 - Physical environment.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Physical environment. 52...) PER DIEM FOR ADULT DAY HEALTH CARE OF VETERANS IN STATE HOMES Standards § 52.200 Physical environment. The physical environment must be designed, constructed, equipped, and maintained to protect the health...

Apparatus and method for modifying the operation of a robotic vehicle in a real environment, to emulate the operation of the robotic vehicle operating in a mixed reality environment

Science.gov (United States)

Garretson, Justin R [Albuquerque, NM; Parker, Eric P [Albuquerque, NM; Gladwell, T Scott [Albuquerque, NM; Rigdon, J Brian [Edgewood, NM; Oppel, III, Fred J.

2012-05-29

Apparatus and methods for modifying the operation of a robotic vehicle in a real environment to emulate the operation of the robotic vehicle in a mixed reality environment include a vehicle sensing system having a communications module attached to the robotic vehicle for communicating operating parameters related to the robotic vehicle in a real environment to a simulation controller for simulating the operation of the robotic vehicle in a mixed (live, virtual and constructive) environment wherein the affects of virtual and constructive entities on the operation of the robotic vehicle (and vice versa) are simulated. These effects are communicated to the vehicle sensing system which generates a modified control command for the robotic vehicle including the effects of virtual and constructive entities, causing the robot in the real environment to behave as if virtual and constructive entities existed in the real environment.

Construction of 2D quasi-periodic Rauzy tiling by similarity transformation

International Nuclear Information System (INIS)

Zhuravlev, V. G.; Maleev, A. V.

2009-01-01

A new approach to constructing self-similar fractal tilings is proposed based on the construction of semigroups generated by a finite set of similarity transformations. The Rauzy tiling-a 2D analog of 1D Fibonacci tiling generated by the golden mean-is used as an example to illustrate this approach. It is shown that the Rauzy torus development and the elementary fractal boundary of Rauzy tiling can be constructed in the form of a set of centers of similarity semigroups generated by two and three similarity transformations, respectively. A centrosymmetric tiling, locally dual to the Rauzy tiling, is constructed for the first time and its parameterization is developed.

Construction project of Flamanville 3 NPP. The participation of Iberdrola engineering and Construction

International Nuclear Information System (INIS)

Diaz Prada, J. I.; Cubian, B.

2014-01-01

Iberdrola Engineering and Construction (IIC) leads several projects mini EPC for the EPR Flamanville 3 NPP for providing important for safety components and auxiliary systems in the pump house and in the turbine island. The realization of this new nuclear project has been a challenge from the technical and organizational perspective because the plant is the first of the new nuclear station (FDAKE) type EPR 1700 MWe series in a highly restrictive environment due to to the large number of particular requirements from the final customer and the meager degree of progress of the design to the date of commencement of construction. (Author)

The construction project manager in South Africa: Analysis of ...

African Journals Online (AJOL)

Journal Home > Vol 22, No 1 (2015) > ... Construction project managers in the built environment come from various backgrounds and knowledge bases; therefore, the project managers' project ... Industry-specific guidelines for construction project management (PMBOK and SACPCMP) were obtained and analysed.

Mortality table construction

Science.gov (United States)

Sutawanir

2015-12-01

Mortality tables play important role in actuarial studies such as life annuities, premium determination, premium reserve, valuation pension plan, pension funding. Some known mortality tables are CSO mortality table, Indonesian Mortality Table, Bowers mortality table, Japan Mortality table. For actuary applications some tables are constructed with different environment such as single decrement, double decrement, and multiple decrement. There exist two approaches in mortality table construction : mathematics approach and statistical approach. Distribution model and estimation theory are the statistical concepts that are used in mortality table construction. This article aims to discuss the statistical approach in mortality table construction. The distributional assumptions are uniform death distribution (UDD) and constant force (exponential). Moment estimation and maximum likelihood are used to estimate the mortality parameter. Moment estimation methods are easier to manipulate compared to maximum likelihood estimation (mle). However, the complete mortality data are not used in moment estimation method. Maximum likelihood exploited all available information in mortality estimation. Some mle equations are complicated and solved using numerical methods. The article focus on single decrement estimation using moment and maximum likelihood estimation. Some extension to double decrement will introduced. Simple dataset will be used to illustrated the mortality estimation, and mortality table.

Methodology for modular nuclear plant design and construction

International Nuclear Information System (INIS)

Lapp, C.W.; Golay, M.

1992-01-01

During the past decade, the rising cost of nuclear power plant construction has caused the cancellation of many projects and has forced some utilities into bankruptcy. Many factors have contributed to capital cost increases, including regulatory changes, the absence of standard designs, and low worker productivity. Low worker productivity can be attributed to the conventional building process, which is not conductive to productive labor. This study presents innovative ways to reduce the capital cost of nuclear plants through more efficient construction processes designed to increase worker productivity. A major portion of the plant capital cost is the interest paid during construction on borrowed capital. Modular fabrication could potentially reduce interest payments by compressing the construction schedule of nuclear facilities. Additional cost savings expected from modular designs arise from improved quality, productivity, and schedule control in fabrication of plant elements within a factory environment

The niche construction perspective: a critical appraisal.

Science.gov (United States)

Scott-Phillips, Thomas C; Laland, Kevin N; Shuker, David M; Dickins, Thomas E; West, Stuart A

2014-05-01

Niche construction refers to the activities of organisms that bring about changes in their environments, many of which are evolutionarily and ecologically consequential. Advocates of niche construction theory (NCT) believe that standard evolutionary theory fails to recognize the full importance of niche construction, and consequently propose a novel view of evolution, in which niche construction and its legacy over time (ecological inheritance) are described as evolutionary processes, equivalent in importance to natural selection. Here, we subject NCT to critical evaluation, in the form of a collaboration between one prominent advocate of NCT, and a team of skeptics. We discuss whether niche construction is an evolutionary process, whether NCT obscures or clarifies how natural selection leads to organismal adaptation, and whether niche construction and natural selection are of equivalent explanatory importance. We also consider whether the literature that promotes NCT overstates the significance of niche construction, whether it is internally coherent, and whether it accurately portrays standard evolutionary theory. Our disagreements reflect a wider dispute within evolutionary theory over whether the neo-Darwinian synthesis is in need of reformulation, as well as different usages of some key terms (e.g., evolutionary process). © 2013 The Author(s). Evolution published by Wiley Periodicals, Inc. on behalf of The Society for the Study of Evolution.

Research on carbon emission driving factors of China’s provincial construction industry

Science.gov (United States)

Shang, Mei; Dong, Rui; Fu, Yujie; Hao, Wentao

2018-03-01

As a pillar industry of the national economy, the damage to the environment by construction industry can not be ignored. In the context of low carbon development, identifying the main driving factors for the carbon emission of the provincial construction industry are the key for the local government to formulate the development strategy for construction. In the paper, based on the Kaya factor decomposition method, the carbon intensity of the energy structure, energy intensity and the impact of the construction output on the carbon emission of provincial construction industry are studied, and relevant suggestions for low carbon development of provincial construction industry are proposed. The conclusion of this paper provides a theoretical basis for the early realization of low-carbon development in China’s provincial construction industry.

A variational approach to niche construction.

Science.gov (United States)

Constant, Axel; Ramstead, Maxwell J D; Veissière, Samuel P L; Campbell, John O; Friston, Karl J

2018-04-01

In evolutionary biology, niche construction is sometimes described as a genuine evolutionary process whereby organisms, through their activities and regulatory mechanisms, modify their environment such as to steer their own evolutionary trajectory, and that of other species. There is ongoing debate, however, on the extent to which niche construction ought to be considered a bona fide evolutionary force, on a par with natural selection. Recent formulations of the variational free-energy principle as applied to the life sciences describe the properties of living systems, and their selection in evolution, in terms of variational inference. We argue that niche construction can be described using a variational approach. We propose new arguments to support the niche construction perspective, and to extend the variational approach to niche construction to current perspectives in various scientific fields. © 2018 The Authors.

Construction and operation of Clinch River Breeder Reactor Plant: Project Management Corporation, Tennessee Valley Authority, and Energy Research and Development Administration. Final environment statement. Docket No. 50-537

International Nuclear Information System (INIS)

1977-02-01

Chapters are included on the site and environs, facility description, environmental impacts due to construction, environmental impact of plant operation environmental measurement and monitoring programs, environmental impacts of postulated accidents, need for the proposed facility, alternatives, and evaluation of the proposed action

Construction of a Learning Agent Handling Its Rewards According to Environmental Situations

Science.gov (United States)

Moriyama, Koichi; Numao, Masayuki

The authors aim at constructing an agent which learns appropriate actions in a Multi-Agent environment with and without social dilemmas. For this aim, the agent must have nonrationality that makes it give up its own profit when it should do that. Since there are many studies on rational learning that brings more and more profit, it is desirable to utilize them for constructing the agent. Therefore, we use a reward-handling manner that makes internal evaluation from the agent's rewards, and then the agent learns actions by a rational learning method with the internal evaluation. If the agent has only a fixed manner, however, it does not act well in the environment with and without dilemmas. Thus, the authors equip the agent with several reward-handling manners and criteria for selecting an effective one for the environmental situation. In the case of humans, what generates the internal evaluation is usually called emotion. Hence, this study also aims at throwing light on emotional activities of humans from a constructive view. In this paper, we divide a Multi-Agent environment into three situations and construct an agent having the reward-handling manners and the criteria. We observe that the agent acts well in all the three Multi-Agent situations composed of homogeneous agents.

Ecological and evolutionary consequences of niche construction for its agent.

Science.gov (United States)

Kylafis, Grigoris; Loreau, Michel

2008-10-01

Niche construction can generate ecological and evolutionary feedbacks that have been underinvestigated so far. We present an eco-evolutionary model that incorporates the process of niche construction to reveal its effects on the ecology and evolution of the niche-constructing agent. We consider a simple plant-soil nutrient ecosystem in which plants have the ability to increase the input of inorganic nutrient as an example of positive niche construction. On an ecological time scale, the model shows that niche construction allows the persistence of plants under infertile soil conditions that would otherwise lead to their extinction. This expansion of plants' niche, however, requires a high enough rate of niche construction and a high enough initial plant biomass to fuel the positive ecological feedback between plants and their soil environment. On an evolutionary time scale, we consider that the rates of niche construction and nutrient uptake coevolve in plants while a trade-off constrains their values. Different evolutionary outcomes are possible depending on the shape of the trade-off. We show that niche construction results in an evolutionary feedback between plants and their soil environment such that plants partially regulate soil nutrient content. The direct benefit accruing to plants, however, plays a crucial role in the evolutionary advantage of niche construction.

Construction environment education development activity for children pre-school

OpenAIRE

MA. TRAN THI THUY NGA; MA. PHAM THI YEN

2015-01-01

Education motor development contribute to the comprehensive development of pre-school children. Building educational environment for young athletes develop in pre-school is one of many issues of concern in the current stage of pre-school education in Vietnam.

Managing Workplace Conflict in the School Environment ...

African Journals Online (AJOL)

Managing Workplace Conflict in the School Environment: Challenges, ... Annals of Humanities and Development Studies ... in a working environment, differences in opinion, attitudes and beliefs are bound to ... Conflict, if constructively handled, can be very helpful in making necessary changes within the work environment.

An Educational Data Mining Approach to Concept Map Construction for Web based Learning

Directory of Open Access Journals (Sweden)

Anal ACHARYA

2017-01-01

Full Text Available This aim of this article is to study the use of Educational Data Mining (EDM techniques in constructing concept maps for organizing knowledge in web based learning systems whereby studying their synergistic effects in enhancing learning. This article first provides a tutorial based introduction to EDM. The applicability of web based learning systems in enhancing the efficiency of EDM techniques in real time environment is investigated. Web based learning systems often use a tool for organizing knowledge. This article explores the use of one such tool called concept map for this purpose. The pioneering works by various researchers who proposed web based learning systems in personalized and collaborative environment in this arena are next presented. A set of parameters are proposed based on which personalized and collaborative learning applications may be generalized and their performances compared. It is found that personalized learning environment uses EDM techniques more exhaustively compared to collaborative learning for concept map construction in web based environment. This article can be used as a starting point for freshers who would like to use EDM techniques for concept map construction for web based learning purposes.

Technique for Reduction of Environmental Pollution from Construction Wastes

Science.gov (United States)

Bakaeva, N. V.; Klimenko, M. Y.

2017-11-01

The results of the research on the negative impact construction wastes have on the urban environment and construction ecological safety are described. The research results are based on the statistical data and indicators calculated with the use of environmental pollution assessment in the restoration system of urban buildings technical conditions. The technique for the reduction of environmental pollution from construction wastes is scientifically based on the analytic summary of scientific and practical results for ecological safety ensuring at major overhaul and current repairs (reconstruction) of the buildings and structures. It is also based on the practical application of the probability theory method, system analysis and disperse system theory. It is necessary to execute some stages implementing the developed technique to reduce environmental pollution from construction wastes. The stages include various steps starting from information collection to the system formation with optimum performance characteristics which are more resource saving and energy efficient for the accumulation of construction wastes from urban construction units. The following tasks are solved under certain studies: basic data collection about construction wastes accumulation; definition and comparison of technological combinations at each system functional stage intended for the reduction of construction wastes discharge into the environment; assessment criteria calculation of resource saving and energy efficiency; optimum working parameters of each implementation stage are created. The urban construction technique implementation shows that the resource saving criteria are from 55.22% to 88.84%; potential of construction wastes recycling is 450 million tons of construction damaged elements (parts).

Construction of 'Monju' to begin this year

International Nuclear Information System (INIS)

1980-01-01

In March, 1980, the Atomic Energy Commission, Japan, modified its basic policy on fast breeder reactors, which is the first modification in twelve years. It postponed the target time of commercializing FBRs by ten years, in accordance with the present level of the development, from the original target of 1985. But the construction of the prototype FBR ''Monju'' will be started this year in Fukui Prefecture as the successor to the experimental FBR ''Joyo'' of 75 MWt. The attainment of criticality is expected around 1987. The percentage of the construction cost to be borne by the electric utilities and manufacturers was decided at 20% by the AEC as it increased to some 400 billion yen do to inflation. In the budget for FY 1980, the government has set aside 15.6 billion yen for the construction of ''Monju''. The environmental assessment concerning the planned construction of ''Monju'' in Tsuruga City, submitted by the PNC, was approved by the Fukui Prefectural Council for the Preservation of Natural Environment. The construction will be approved by the end of 1980 by the governor of Fukui. ''Monju'' is a sodium-cooled fast neutron reactor of loop type with 300 MWe output. Its design has been continued from 1968 to 1976. The outline of ''Monju'', its core and fuel, the equipment for the cooling system, the steam generators, the treatment of radioactive wastes and buildings are described. (Kako, I.)

Envisioning Science Environment Technology and Society

Science.gov (United States)

Maknun, J.; Busono, T.; Surasetja, I.

2018-02-01

Science Environment Technology and Society (SETS) approach helps students to connect science concept with the other aspects. This allows them to achieve a clearer depiction of how each concept is linked with the other concepts in SETS. Taking SETS into account will guide students to utilize science as a productive concept in inventing and developing technology, while minimizing its negative impacts on the environment and society. This article discusses the implementation of Sundanese local wisdoms, that can be found in the local stilt house (rumah panggung), in the Building Construction subject in vocational high school on Building Drawing Technique expertise. The stilt house structural system employs ties, pupurus joints, and wedges on its floor, wall, and truss frames, as well as its beams. This local knowledge was incorporated into the Building Construction learning program and applied on the following basic competences: applying wood’s specification and characteristics for building construction, managing wood’s specification and characteristics for building construction, analyzing building structure’s type and function based on their characteristics, reasoning building structure’s type and function based on their characteristics, categorizing wood construction works, and reasoning wood construction works. The research result is the Sundanese traditional-local-wisdom-based learning design of the Building Construction subject.

Use of virtual environments to reduce the construction costs of the next generation nuclear power reactors

International Nuclear Information System (INIS)

Whisker, V.E.; Baratta, A.J.

2007-01-01

The near term deployment of the next generation of reactors will only be successful if they are built on time and without the costly overruns experienced in the previous generation. One critical factor in achieving these goals is to ensure the design is optimized for constructability. In this work the authors explored the effectiveness of full-scale virtual reality simulation in the optimization of the design and construction of the next generation of nuclear reactors. The research tested the suitability of immersive virtual reality display technology in aiding engineers in evaluating potential cost reductions that can be realized by the optimization of design and installation and construction sequences. The intent of this research is to see if this type of technology can be used in capacities similar to those currently filled by full-scale physical mockups and desktop simulations. Using a fully-immersive five sided virtual reality system, known as a CAVE, the authors constructed a series of virtual mockups that represented two next generation nuclear power plants, the Westinghouse AP-1000 and the Pebble Bed Modular Reactor (PBMR). These virtual mockups were then tested as a design tool to help locate and correct problem areas, to optimize the construction sequence, and to assist with familiarizing trades people with the performance of maintenance activities. A series of experiments were performed to assess the usefulness of these virtual mockups in accomplishing these tasks. (authors)

Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

OpenAIRE

Larissa A. R. U. Freitas; Alessandra Magrini

2017-01-01

The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ec...

Niche construction drives social dependence in hermit crabs.

Science.gov (United States)

Laidre, Mark E

2012-10-23

Organisms can receive not only a genetic inheritance from their ancestors but also an ecological inheritance, involving modifications their ancestors made to the environment through niche construction. Ecological inheritances may persist as a legacy, potentially generating selection pressures that favor sociality. Yet, most proposed cases of sociality being impacted by an ecological inheritance come from organisms that live among close kin and were highly social before their niche construction began. Here, I show that in terrestrial hermit crabs (Coenobita compressus)--organisms that do not live with kin and reside alone, each in its own shell--niche-construction drives social dependence, such that individuals can only survive in remodeled shells handed down from conspecifics. These results suggest that niche construction can be an important initiator of evolutionary pressures to socialize, even among unrelated and otherwise asocial organisms. Copyright © 2012 Elsevier Ltd. All rights reserved.

Entanglement reactivation in separable environments

International Nuclear Information System (INIS)

Pirandola, Stefano

2013-01-01

Combining two entanglement-breaking channels into a correlated-noise environment restores the distribution of entanglement. Surprisingly, this reactivation can be induced by the injection of separable correlations from the composite environment. In any dimension (finite or infinite), we can construct classically correlated ‘twirling’ environments which are entanglement-breaking in the transmission of single systems but entanglement-preserving when two systems are transmitted. Here entanglement is simply preserved by the existence of decoherence-free subspaces. Remarkably, even when such subspaces do not exist, a fraction of the input entanglement can still be distributed. This is found in separable Gaussian environments, where distillable entanglement is able to survive the two-mode transmission, despite being broken in any single-mode transmission by the strong thermal noise. In the Gaussian setting, entanglement restoration is a threshold process, occurring only after a critical amount of correlations has been injected. Such findings suggest new perspectives for distributing entanglement in realistic environments with extreme decoherence, identifying separable correlations and classical memory effects as physical resources for ‘breaking entanglement-breaking’. (paper)

Construction and Verification of PLC LD-programs by LTL-specification

Directory of Open Access Journals (Sweden)

E. V. Kuzmin

2013-01-01

Full Text Available An approach to construction and verification of PLC LD-programs for discrete problems is proposed. For the specification of the program behavior, we use the linear-time temporal logic LTL. Programming is carried out in the LD-language (Ladder Diagram according to an LTL-specification. The correctness analysis of an LTL-specification is carried out by the symbolic model checking tool Cadence SMV. A new approach to programming and verification of PLC LD-programs is shown by an example. For a discrete problem, we give a LD-program, its LTL-specification and an SMV-model. The purpose of the article is to describe an approach to programming PLC, which would provide a possibility of LD-program correctness analysis by the model checking method. Under the proposed approach, the change of the value of each program variable is described by a pair of LTL-formulas. The first LTL-formula describes situations which increase the value of the corresponding variable, the second LTL-formula specifies conditions leading to a decrease of the variable value. The LTL-formulas (used for speci- fication of the corresponding variable behavior are constructive in the sense that they construct the PLC-program (LD-program, which satisfies temporal properties expressed by these formulas. Thus, the programming of PLC is reduced to the construction of LTLspecification of the behavior of each program variable. In addition, an SMV-model of a PLC LD-program is constructed according to LTL-specification. Then, the SMV-model is analysed by the symbolic model checking tool Cadence SMV.

Strategies for effective management of health and safety in confined site construction

Directory of Open Access Journals (Sweden)

John Spillane

2013-12-01

Full Text Available Purpose: The overall aim of this research is to identify and catalogue the numerous managerial strategies for effective management of health and safety on a confined, urban, construction site. Design/Methodology/Approach: This is achieved by utilising individual interviews, focus groups discussion on selected case studies of confined construction sites, coupled with a questionnaire survey. Findings: The top five key strategies include (1 Employ safe system of work plans to mitigate personnel health and safety issues; (2 Inform personnel, before starting on-site, of the potential issues using site inductions; (3 Effective communication among site personnel; (4 Draft and implement an effective design site layout prior to starting on-site; and (5 Use of banksman (traffic co-ordinator to segregate personnel from vehicular traffic. Practical Implication: The construction sector is one of the leading industries in accident causation and with the continued development and regeneration of our urban centres, confined site construction is quickly becoming the norm - an environment which only fuels accident creation within the construction sector. Originality/Value: This research aids on-site management that requires direction and assistance in the identification and implementation of key strategies for the management of health and safety, particularly in confined construction site environments.

42 CFR 416.44 - Condition for coverage-Environment.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Condition for coverage-Environment. 416.44 Section... for coverage—Environment. The ASC must have a safe and sanitary environment, properly constructed, equipped, and maintained to protect the health and safety of patients. (a) Standard: Physical environment...

Physical environment. [environmental impact statement required for general aviation airport construction

Science.gov (United States)

1975-01-01

Environmental legislation affecting airports and the more common environmental effects resulting from airport construction are discussed with special emphasis on general aviation airports. The discussion is focused on the regulation of noise, pollution, and water quality.

Construction of genetically engineered bacteria that degrades organophosphorus pesticide residues and can be easily detected by the fluorescence.

Science.gov (United States)

Li, Qin; Wang, Pan; Chen, Rui; Li, Wei; Wu, Yi-Jun

2014-01-01

Organophosphorus compounds (OPs) are widely used in agriculture and industry and there is increased concern about their toxicological effects in the environment. Bioremediation can offer an efficient and cost-effective option for the removal of OPs. Herein, we describe the construction of a genetically engineered microorganism (GEM) that can degrade OPs and be directly detected and monitored in the environment using an enhanced green fluorescent protein (EGFP) fusion strategy. The coding regions of EGFP, a reporter protein that can fluoresce by itself, and organophosphorus hydrolase (OPH), which has a broad substrate specificity and is able to hydrolyse a number of organophosphorus pesticides, were cloned into the expression vector pET-28b. The fusion protein of EGFP-OPH was expressed in E. coli BL21 (DE3) and the protein expression reached the highest level at 11 h after isopropyl beta-D-thiogalactopyranoside induction. The fluorescence of the GEM was detected by fluorescence spectrophotometry and microscopy, and its ability to degrade OPs was determined by OPH activity assay. Those GEM that express the fusion protein (EGFP and OPH) exhibited strong fluorescence intensity and also potent hydrolase activity, which could be used to degrade organophosphorus pesticide residues in the environment and can also be directly monitored by fluorescence.

[Ecological demonstration activity and eco-civilization construction mode: review and prospects].

Science.gov (United States)

Mao, Hui-ping; He, Xuan; He, Jia; Niu, Dong-jie; Bao, Cun-kuan

2013-04-01

Ecological civilization is to normalize human development behaviors to harmonize the relationships between social and ecological development and eco-environment protection. In this paper, a comparative analysis was made on the ecological demonstration activities of ecological demonstration areas led by the Ministry of Environmental Protection, exemplar cities of national environmental protection, and ecological provinces, cities, and counties. It was considered that all the ecological demonstration activities had the problems of lacking pertinence of construction goals, disordered construction subjects, inefficient construction processes, and lacking continuous incentive mechanisms of assessment. In the meantime, through the analysis of the connotations of eco-civilization, the relationships between eco-civilization and eco-demonstration constructions were approached, and the eco-civilization construction mode was put forward in terms of construction goal, construction subject, and construction processes and assessment. The construction mode included the construction goal based on regional characteristics; the synergistic cooperation of construction subjects, the expanding ways of public participation, and the establishment of evaluation system for comprehensively measuring the 'actions and results'.

40 CFR 125.99 - What are approved design and construction technologies?

Science.gov (United States)

2010-07-01

... construction technologies? 125.99 Section 125.99 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...) of the Act § 125.99 What are approved design and construction technologies? (a) The following....99 was suspended. ...

Identification and assessment of risk factors affecting construction projects

Directory of Open Access Journals (Sweden)

Mohamed Sayed Bassiony Ahmed Abd El-Karim

2017-08-01

Unexpected increase in cost and delays in construction projects are caused by owner, contractor, environments, etc. in which several types of risk factors may occur concurrently. The effect of cost overrun and schedule overrun do not only influence the construction industry but the overall economy as well. Even though construction project increasing in cost and schedule has received extensive attention of researchers, but because of continuous changes and development in the field, the study considered of added value to the construction industry in Egypt, in addition to risk strategy and plan analysis. In order to meet the deadline of a project and due to the complex nature of construction projects, cost and scheduling should be flexible enough to accommodate changes without negatively affecting the overall project cost and duration. As such, the objectives of the presented research in this paper are to identify, study, and assess the effect of the factors that affect cost and time contingency. Data are collected from sixteen construction companies in Egypt. The collected data, output charts and analyses spreadsheets will be used for the development of computerized model built by the authors with identification abbreviation RIAM.

Study on Evaluation Index System of Green mine construction

Science.gov (United States)

Li, xin; Yang, JunJie; Yan, Hongcai; Cao, Hongjun

2017-11-01

Green mine is a new and science comprehensive construction mode of mine, which runs the concept of green development through the whole process of mineral resources development and utilization, promotes the transformation and upgrading of mineral enterprises and achieves the healthy and sustainable development of mining industry. This paper is based on “the basic conditions of national green mine”, combined with the current situation of green mine construction, constructing green mine construction evaluation index system which is divided into five areas, including management, comprehensive utilization of mineral resources. technological innovation. ecological environment and cultural construction.

DREEM on, dentists! Students' perceptions of the educational environment in a German dental school as measured by the Dundee Ready Education Environment Measure.

Science.gov (United States)

Ostapczuk, M S; Hugger, A; de Bruin, J; Ritz-Timme, S; Rotthoff, T

2012-05-01

The educational climate in which future doctors are trained is an important aspect of medical education. In contrast to human medicine, it has been rather neglected in dental educational research. The aim of the study was to supplement this lack by applying and validating the Dundee Ready Education Environment Measure (DREEM) for the first time in a German-speaking sample of dental students. All dental students at the Medical Faculty of Heinrich-Heine-University Düsseldorf were asked to complete a German adaptation of the DREEM and the Düsseldorf Mission Statement Questionnaire (DMSQ) in a paper-pencil survey. Data from 205 participants were analysed. Psychometric validation included analysis of item homogeneity and discrimination, test reliability, criterion and construct validity (convergent, factorial). DREEM item parameters were satisfactory, reliability (α = 0.87) and convergent validity (r = 0.66 with DMSQ) were also high. Factor analyses, however, yielded dimensions which did not fully correspond to the original DREEM subscales. Overall perception of the educational environment was positive (DREEM total score = 122.95 ± 15.52). Students in the clinical part of course rated the atmosphere more negatively, but their academic self-perception more positively than preclinical students. Showing satisfactory psychometric properties, DREEM proved suitable for assessing educational environments among dental students. Given the right circumstances, e.g., small and early clinically oriented classes, traditional curricula can generate positive environments. © 2011 John Wiley & Sons A/S.

Implementing AORN recommended practices for a safe environment of care, part II.

Science.gov (United States)

Kennedy, Lynne

2014-09-01

Construction in and around a working perioperative suite is a challenge beyond merely managing traffic patterns and maintaining the sterile field. The AORN "Recommended practices for a safe environment of care, part II" provides guidance on building design; movement of patients, personnel, supplies, and equipment; environmental controls; safety and security; and control of noise and distractions. Whether the OR suite evolves through construction, reconstruction, or remodeling, a multidisciplinary team of construction experts and health care professionals should create a functional plan and communicate at every stage of the project to maintain a safe environment and achieve a well-designed outcome. Emergency preparedness, a facility-wide security plan, and minimization of noise and distractions in the OR also help enhance the safety of the perioperative environment. Copyright © 2014 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Comprehensive modelling and simulation of cylindrical nanoparticles manipulation by using a virtual reality environment.

Science.gov (United States)

Korayem, Moharam Habibnejad; Hoshiar, Ali Kafash; Ghofrani, Maedeh

2017-08-01

With the expansion of nanotechnology, robots based on atomic force microscope (AFM) have been widely used as effective tools for displacing nanoparticles and constructing nanostructures. One of the most limiting factors in AFM-based manipulation procedures is the inability of simultaneously observing the controlled pushing and displacing of nanoparticles while performing the operation. To deal with this limitation, a virtual reality environment has been used in this paper for observing the manipulation operation. In the simulations performed in this paper, first, the images acquired by the atomic force microscope have been processed and the positions and dimensions of nanoparticles have been determined. Then, by dynamically modelling the transfer of nanoparticles and simulating the critical force-time diagrams, a controlled displacement of nanoparticles has been accomplished. The simulations have been further developed for the use of rectangular, V-shape and dagger-shape cantilevers. The established virtual reality environment has made it possible to simulate the manipulation of biological particles in a liquid medium. Copyright © 2017 Elsevier Inc. All rights reserved.

Synthetic environments

Science.gov (United States)

Lukes, George E.; Cain, Joel M.

1996-02-01

The Advanced Distributed Simulation (ADS) Synthetic Environments Program seeks to create robust virtual worlds from operational terrain and environmental data sources of sufficient fidelity and currency to interact with the real world. While some applications can be met by direct exploitation of standard digital terrain data, more demanding applications -- particularly those support operations 'close to the ground' -- are well-served by emerging capabilities for 'value-adding' by the user working with controlled imagery. For users to rigorously refine and exploit controlled imagery within functionally different workstations they must have a shared framework to allow interoperability within and between these environments in terms of passing image and object coordinates and other information using a variety of validated sensor models. The Synthetic Environments Program is now being expanded to address rapid construction of virtual worlds with research initiatives in digital mapping, softcopy workstations, and cartographic image understanding. The Synthetic Environments Program is also participating in a joint initiative for a sensor model applications programer's interface (API) to ensure that a common controlled imagery exploitation framework is available to all researchers, developers and users. This presentation provides an introduction to ADS and the associated requirements for synthetic environments to support synthetic theaters of war. It provides a technical rationale for exploring applications of image understanding technology to automated cartography in support of ADS and related programs benefitting from automated analysis of mapping, earth resources and reconnaissance imagery. And it provides an overview and status of the joint initiative for a sensor model API.

Identifying and managing risk in international construction projects

Directory of Open Access Journals (Sweden)

Sachin Kerur

2012-04-01

Full Text Available Over the last decade, major construction projects have increasingly arisen in countries or regions that lack specialist, expert construction contractors, suppliers and consultants. Steps are being taken by governments in the Middle East, Eastern Europe, China, India and developing markets to address national infrastructure deficits, and by so doing, are creating new regions of booming construction demand. When coupled with anaemic growth in developed markets such as the United Kingdom, the USA and Western Europe, foreign markets present attractive opportunities to the global construction industry. However, foreign markets are littered with the cautionary tales of international contractors and consultants that have failed to grasp the intricacies and risks of operating in a new environment and have failed to capitalise on the opportunities available. By identifying the classes of risks, and undertaking detailed analysis, ranking and mitigation of relevant jurisdictional risks, participants in international construction projects will increase the likelihood of project success and commercial longevity in the new jurisdiction. Risk identification and assessment is not a science but an art, and while there are many potential approaches to the issue, we propose that our strategies for identifying, assessing, ranking and mitigating jurisdictional risks offer new international players a good chance of commercial success.

Measurement plan and observational construction program on drift excavation at the Horonobe Underground Research Laboratory project

International Nuclear Information System (INIS)

Yamasaki, Masanao; Yamaguchi, Takehiro; Funaki, Hironori; Fujikawa, Daisuke; Tsusaka, Kimikazu

2008-09-01

The Horonobe URL Project is being pursued by the Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formations at Horonobe, northern Hokkaido. The project consists of two major research areas, 'Geoscientific Research' and 'R and D' on Geological Disposal', and proceeds in three overlapping phases, 'Phase I: Surface-based investigation', 'Phase II: Construction' and 'Phase III: Operation', over a period of 20 years. On the Horonobe URL Project, 'Phase 1' was finished in 2005FY and construction of the underground facility was started since then. Now, 'Phase 2' (investigations during construction of the underground facilities) is on-going. On the 'Development of engineering techniques for use in the deep underground environment' in Phase 1, based on the various types of data acquired on investigations from the surface, the design of underground facility in advance was planned. At the inception of the Phase II investigations, an investigation report titled 'Measurement Plan and Observational Construction Program on Shaft Excavation at the Horonobe URL Project' (hereinafter referred to as 'Observational Construction Program') was published. The Observational Construction Program summarizes followings from the Phase I investigations: measurements for safety/reasonable construction, measurements for R and D on enhancement of shaft design/construction technology, and measurements for verification of the deep geological environment model estimated before shaft excavation, and it is on-going. This report summarizes the measurement plan during construction of drifts based on the design in advance and the observational construction program for feedback measurements data into design and construction on subsequent steps. This report also describes about design and construction management program of underground facility and R and D program on

Labor productivity adjustment factors. A method for estimating labor construction costs associated with physical modifications to nuclear power plants

International Nuclear Information System (INIS)

Riordan, B.J.

1986-03-01

This report develops quantitative labor productivity adjustment factors for the performance of regulatory impact analyses (RIAs). These factors will allow analysts to modify ''new construction'' labor costs to account for changes in labor productivity due to differing work environments at operating reactors and at reactors with construction in progress. The technique developed in this paper relies on the Energy Economic Data Base (EEDB) for baseline estimates of the direct labor hours and/or labor costs required to perform specific tasks in a new construction environment. The labor productivity cost factors adjust for constraining conditions such as working in a radiation environment, poor access, congestion and interference, etc., which typically occur on construction tasks at operating reactors and can occur under certain circumstances at reactors under construction. While the results do not portray all aspects of labor productivity, they encompass the major work place conditions generally discernible by the NRC analysts and assign values that appear to be reasonable within the context of industry experience. 18 refs

The Perceived Benefits of Apps by Construction Professionals in New Zealand

Directory of Open Access Journals (Sweden)

Tong Liu

2017-12-01

Full Text Available The construction sector is a key driver of economic growth in New Zealand; however, its productivity is still considered to be low. Prior research has suggested that information and communication technology (ICT can help enhance efficiency and productivity. However, there is little research on the use of mobile technologies by New Zealand construction workforce. This paper reports findings of an exploratory study with the objective of examining the perceived benefits regarding uptake of apps in New Zealand construction sector. Using self-administered questionnaire survey, feedback was received from the major construction trade and professional organisations in New Zealand. Survey data was analyzed using descriptive, one-sample t-test, Spearman’s rank correlation coefficient and structural equation modeling. Results showed that iPhone and Android phone currently dominate the smartphone market in New Zealand construction industry. The top three application areas are site photos, health and safety reporting and timekeeping. The benefits of mobile apps were widely confirmed by the construction professionals. The benefit of “better client relationship management and satisfaction” has substantial correlation with overall productivity improvement and best predictor of the overall productivity improvement. These findings provide a starting point for further research aimed at improving the uptake and full leveraging of mobile technologies to improve the dwindling productivity trend in New Zealand construction industry.

Beyond the material grave: Life Cycle Impact Assessment of leaching from secondary materials in road and earth constructions

International Nuclear Information System (INIS)

Schwab, Oliver; Bayer, Peter; Juraske, Ronnie; Verones, Francesca; Hellweg, Stefanie

2014-01-01

Highlights: • We model environmental impacts of leaching from secondary construction material. • Industrial wastes in construction contain up to 45,000 t heavy metals per year (D). • In a scenario, 150 t are leached to the environment within 100 years after construction. • All heavy metals but As, Sb and Mo are adsorbed by 20 cm subsoil in this scenario. • Environmental impacts depend on material, pollutant, construction type, and geography. - Abstract: In industrialized countries, large amounts of mineral wastes are produced. They are re-used in various ways, particularly in road and earth constructions, substituting primary resources such as gravel. However, they may also contain pollutants, such as heavy metals, which may be leached to the groundwater. The toxic impacts of these emissions are so far often neglected within Life Cycle Assessments (LCA) of products or waste treatment services and thus, potentially large environmental impacts are currently missed. This study aims at closing this gap by assessing the ecotoxic impacts of heavy metal leaching from industrial mineral wastes in road and earth constructions. The flows of metals such as Sb, As, Pb, Cd, Cr, Cu, Mo, Ni, V and Zn originating from three typical constructions to the environment are quantified, their fate in the environment is assessed and potential ecotoxic effects evaluated. For our reference country, Germany, the industrial wastes that are applied as Granular Secondary Construction Material (GSCM) carry more than 45,000 t of diverse heavy metals per year. Depending on the material quality and construction type applied, up to 150 t of heavy metals may leach to the environment within the first 100 years after construction. Heavy metal retardation in subsoil can potentially reduce the fate to groundwater by up to 100%. One major challenge of integrating leaching from constructions into macro-scale LCA frameworks is the high variability in micro-scale technical and geographical factors

Beyond the material grave: Life Cycle Impact Assessment of leaching from secondary materials in road and earth constructions

Energy Technology Data Exchange (ETDEWEB)

Schwab, Oliver [Swiss Federal Institute of Technology Zurich, Institute of Environmental Engineering, John-von-Neumann-Weg 9, 8093 Zurich (Switzerland); Karlsruhe Institute of Technology, Institute for Geography and Geoecology, Adenauerring 20, 76131 Karlsruhe (Germany); Bayer, Peter, E-mail: bayer@erdw.ethz.ch [Swiss Federal Institute of Technology Zurich, Geological Institute, Sonneggstrasse 5, 8092 Zurich (Switzerland); Juraske, Ronnie [Swiss Federal Institute of Technology Zurich, Institute of Environmental Engineering, John-von-Neumann-Weg 9, 8093 Zurich (Switzerland); Verones, Francesca [Swiss Federal Institute of Technology Zurich, Institute of Environmental Engineering, John-von-Neumann-Weg 9, 8093 Zurich (Switzerland); Department of Environmental Science, Institute for Water and Wetland Research, Radboud University Nijmegen, P.O. Box 9010, 6500 GL Nijmegen (Netherlands); Hellweg, Stefanie [Swiss Federal Institute of Technology Zurich, Institute of Environmental Engineering, John-von-Neumann-Weg 9, 8093 Zurich (Switzerland)

2014-10-15

Highlights: • We model environmental impacts of leaching from secondary construction material. • Industrial wastes in construction contain up to 45,000 t heavy metals per year (D). • In a scenario, 150 t are leached to the environment within 100 years after construction. • All heavy metals but As, Sb and Mo are adsorbed by 20 cm subsoil in this scenario. • Environmental impacts depend on material, pollutant, construction type, and geography. - Abstract: In industrialized countries, large amounts of mineral wastes are produced. They are re-used in various ways, particularly in road and earth constructions, substituting primary resources such as gravel. However, they may also contain pollutants, such as heavy metals, which may be leached to the groundwater. The toxic impacts of these emissions are so far often neglected within Life Cycle Assessments (LCA) of products or waste treatment services and thus, potentially large environmental impacts are currently missed. This study aims at closing this gap by assessing the ecotoxic impacts of heavy metal leaching from industrial mineral wastes in road and earth constructions. The flows of metals such as Sb, As, Pb, Cd, Cr, Cu, Mo, Ni, V and Zn originating from three typical constructions to the environment are quantified, their fate in the environment is assessed and potential ecotoxic effects evaluated. For our reference country, Germany, the industrial wastes that are applied as Granular Secondary Construction Material (GSCM) carry more than 45,000 t of diverse heavy metals per year. Depending on the material quality and construction type applied, up to 150 t of heavy metals may leach to the environment within the first 100 years after construction. Heavy metal retardation in subsoil can potentially reduce the fate to groundwater by up to 100%. One major challenge of integrating leaching from constructions into macro-scale LCA frameworks is the high variability in micro-scale technical and geographical factors

Construction Projects Assessment Based on the Sustainable Development Criteria by an Integrated Fuzzy AHP and Improved GRA Model

Directory of Open Access Journals (Sweden)

Seyed Morteza Hatefi

2018-03-01

Full Text Available Due to the increasing population and earth pollution, managing construction and infrastructure projects with less damage to the environment and less pollution is very important. Sustainable development aims at reducing damage to the environment, making projects economical, and increasing comfort and social justice. This study proposes fuzzy analytic hierarchy process (AHP and improved grey relational analysis (GRA to assess construction projects based on the sustainable development criteria. For doing so, sustainable development criteria are first identified in economic, social, and environmental dimensions using literature review, and are then customized for urban construction projects using experts’ opinions. After designing questionnaires and collecting data, fuzzy AHP is used for determining the importance of sustainable development criteria and their subcriteria. Then, improved GRA is employed for assessing six recreational, commercial, and official centers in Isfahan regarding the weights of criteria and subcriteria. The proposed fuzzy AHP-improved GRA help us to prioritize construction projects based on the sustainable development criteria. The results of applying fuzzy AHP show that the weights of economic, social, and environmental criteria are equal to 0.330, 0.321, and 0.349, respectively, which are close to each other. This means that the importance of all three aspects of sustainability is almost equal to each other. Furthermore, “Having profits for the society”, “Increasing social justice”, and “Adherence to environmental policies” are identified as the most important indicators of sustainable development in terms of economic, social, and environmental aspects, respectively. Finally, the results of employing improved GRA determine Negin Chaharbagh recreational and commercial complex as the best project.

The Insight of Industrialised Building System (IBS By Bumiputera Construction Players

Directory of Open Access Journals (Sweden)

Muhammad W. M. N. W.

2016-01-01

Full Text Available The term Industrialised Building System (IBS is widely recognised by construction players in Malaysia since its first implementation since 1960s for IBS pilot projects of Pekeliling Flats and Rifle Range Flats. The aim for the implementation is to promote better system in delivering construction end-products which offers efficiency and effectiveness. At the same time, Bumiputera construction players are the majority of parties in construction industry especially in Small and Medium Enterprises (SMEs. Therefore, the purpose of this paper is to identify the perception and awareness of IBS implementation among Bumiputera players. It is found that, Bumiputera construction players have sound knowledge on the IBS and optimistic towards further implementation for future projects. Nonetheless, issues on payment methods and coordination of IBS project delivery are found to be the negative perceptions which are considered as hindrance for Bumiputera construction players’ involvement in IBS project.

Research on technology environment improvement of related industries based on internet governance

Science.gov (United States)

Zhang, Jing; Guan, Zhongliang

2017-08-01

The technology of Internet is an important factor of industry’s development. Constructing a good technical environment is the foundation of the Internet and related industries’ development. This paper demonstrates the necessity of the construction and improvement of the Internet and the related industries technology environment through comparing the current situation of the related industries. It also points out that China needs to improve the environment of the Internet technology urgently. The paper establishes the technology demand pattern of different related industries, and explores strategies of the different Internet technology environment’s construction and perfection according to the different demand of the strong related Internet and the weak related Internet to the industries environment. This paper analyzes the factors that threaten the security of the Internet, and fully demonstrates the methods and tactics of establishing and improving the technology environment Internet hardware, the Internet and related industries in China under the basis of the framework of comprehensive management of Internet. This paper also studies the construction and improvement of the comprehensive management technology environment based on the Internet industry in China.

Green related practices for construction procurement

Science.gov (United States)

Bidin, Z. A.; Bohari, A. A. M.; Rais, S. L. A.; Saferi, M. M.

2018-04-01

Environment degradation issue has been a worldwide problem and various efforts have been done to minimise the problem. Construction sectors are pointed as one of the major contributors to its construction activities. Green-oriented procurement [GP] is considered as an environmental strategy to integrate the environmental practices into the construction delivery. Thus, this paper reviews the concept of GP and the practices related to it. The outcome of this research findings provides a basis for understanding the concept of GP and the further development of GP. The listed GP practices identified from this paper can serve as guidelines for industry practitioners to design, implement, and benchmarking the green practices in their procurement delivery.

Research of Tunnel Construction Monitoring System Base on Senor Information Fusion

Directory of Open Access Journals (Sweden)

Kaisheng Zhang

2014-05-01

Full Text Available With the complex of the tunnel construction, tunnel construction become more and more difficult, in order to ensure the safety of tunnel construction, the paper introduced a kind of tunnel construction monitoring system based on sensor. The system achieves the real- time monitoring of tunnel construction environment including temperature and humidity, gas concentration, dust concentration, location tracking for construction workers through the wireless communication technology, to control of the real-time status of the tunnel, and ensure timely rescue when the accident occurred.

Robotizing workforce in future built environments

NARCIS (Netherlands)

Maas, G.J.; Gassel, van F.J.M.; Lee, Junbok; Han, Chang-Soo

2011-01-01

The aim of this paper is to define challenges for Automation and Robotics in construction (A+R) to enhance client and social value. Construction contributes to a positive living environment for society and is the largest sector of Europe’s economy with a size of around 2,500 billion Euros. Ten

Value engineering awareness study for sustainable construction in Malaysia

International Nuclear Information System (INIS)

Fathoni U; Zakaria C M; Rohayu C O

2013-01-01

Construction process has often been described as a highly complex process because of the number of disciplines involved during the conceptual, design and construction stage. With the emergence of latest technology and concern for environment, increasing attention in construction industry is given on sustainability. Balance in quality and sustainability has become a major challenge to the construction industry. This paper presents a study that has conducted to determine the acceptance and application of Value Engineering (VE) and Life Cycle Cost Analysis (LCCA) in Malaysia construction industry. A set of questionnaire have distributed to different practitioners in construction industry and the result has reflect the fact that the application of VE and LCCA are still very low.

Effects of the conditions imposed by the environment and by utilities on the design of process engineering plant

Energy Technology Data Exchange (ETDEWEB)

Bernecker, G

1976-09-01

Conditions of environment and utilities have a great influence on the investment and operation costs of process engineering plants. If these conditions are taken into consideration in preliminary process engineering, the considerable amount of time spent in planning subsequent modifications could be saved. This publication from the seminar held with the topic 'planning and construction of process engineering systems' by the VDI-Bildungswerk shows how to facilitate problems of waste products already 'in statu nascendi'. The second part which will be published in the next edition will summarize the possibilities and the determining restrictions in the use of the available media for heating and cooling. Both essays are extended presentations of a chapter from a book in preparation by the VDI with the same title as the seminar.

A novel tool for assessing and summarizing the built environment

Directory of Open Access Journals (Sweden)

Kroeger Gretchen L

2012-10-01

Full Text Available Abstract Background A growing corpus of research focuses on assessing the quality of the local built environment and also examining the relationship between the built environment and health outcomes and indicators in communities. However, there is a lack of research presenting a highly resolved, systematic, and comprehensive spatial approach to assessing the built environment over a large geographic extent. In this paper, we contribute to the built environment literature by describing a tool used to assess the residential built environment at the tax parcel-level, as well as a methodology for summarizing the data into meaningful indices for linkages with health data. Methods A database containing residential built environment variables was constructed using the existing body of literature, as well as input from local community partners. During the summer of 2008, a team of trained assessors conducted an on-foot, curb-side assessment of approximately 17,000 tax parcels in Durham, North Carolina, evaluating the built environment on over 80 variables using handheld Global Positioning System (GPS devices. The exercise was repeated again in the summer of 2011 over a larger geographic area that included roughly 30,700 tax parcels; summary data presented here are from the 2008 assessment. Results Built environment data were combined with Durham crime data and tax assessor data in order to construct seven built environment indices. These indices were aggregated to US Census blocks, as well as to primary adjacency communities (PACs and secondary adjacency communities (SACs which better described the larger neighborhood context experienced by local residents. Results were disseminated to community members, public health professionals, and government officials. Conclusions The assessment tool described is both easily-replicable and comprehensive in design. Furthermore, our construction of PACs and SACs introduces a novel concept to approximate varying

A novel tool for assessing and summarizing the built environment

Science.gov (United States)

2012-01-01

Background A growing corpus of research focuses on assessing the quality of the local built environment and also examining the relationship between the built environment and health outcomes and indicators in communities. However, there is a lack of research presenting a highly resolved, systematic, and comprehensive spatial approach to assessing the built environment over a large geographic extent. In this paper, we contribute to the built environment literature by describing a tool used to assess the residential built environment at the tax parcel-level, as well as a methodology for summarizing the data into meaningful indices for linkages with health data. Methods A database containing residential built environment variables was constructed using the existing body of literature, as well as input from local community partners. During the summer of 2008, a team of trained assessors conducted an on-foot, curb-side assessment of approximately 17,000 tax parcels in Durham, North Carolina, evaluating the built environment on over 80 variables using handheld Global Positioning System (GPS) devices. The exercise was repeated again in the summer of 2011 over a larger geographic area that included roughly 30,700 tax parcels; summary data presented here are from the 2008 assessment. Results Built environment data were combined with Durham crime data and tax assessor data in order to construct seven built environment indices. These indices were aggregated to US Census blocks, as well as to primary adjacency communities (PACs) and secondary adjacency communities (SACs) which better described the larger neighborhood context experienced by local residents. Results were disseminated to community members, public health professionals, and government officials. Conclusions The assessment tool described is both easily-replicable and comprehensive in design. Furthermore, our construction of PACs and SACs introduces a novel concept to approximate varying scales of community and

Structuring Requirements in a Multi-Project Environment in the Construction Industry

DEFF Research Database (Denmark)

Wörösch, Michael

2012-01-01

Being in control of requirements in building projects is vital, since it helps securing the often small profit margins and the reputation of the responsible company. Hence this research aims to introduce requirements management to the construction industry. By means of case study and action...... in this industry, yet, success is here defined as an accomplished and accepted implementation of requirements management processes that are used by the relevant project members in their daily work and where the benefits of implementing requirements management outweighs the cost of invested resources. Furthermore...... it is argued that when running technology development, product development, product platform development, and a portfolio of building projects at the same time the use of requirements management is advantageous and an intelligent way of structuring requirements is needed. This article also demonstrates...

Environmental impacts of construction materials. A report on the contribution of construction materials to greenhouse gas emissions of construction; Rakennusmateriaalien ympaeristoevaikutukset. Selvitys rakennusmateriaalien vaikutuksesta rakentamisen kasvihuonekaasupaeaestoeihin, tiivistelmaeraportti

Energy Technology Data Exchange (ETDEWEB)

Ruuska, A.; Haekkinen, T.; Vares, S.; Korhonen, M.-R.; Myllymaa, T.

2013-05-15

As the energy performance of new construction improves and the related greenhouse gas (GHG) emissions diminish the carbon footprint of construction materials becomes more important. One objective in the current government's programme is to take into account construction materials and products in the energy performance assessment of buildings. At the request of the Ministry of the Environment, VTT Technical Research Centre of Finland and the Finnish Environment Institute analysed, through a case study, the significance of the environmental impacts of construction materials. The aim was to develop preliminary recommendations for guiding construction. The case study calculated the overall GHG emissions from the materials used in an apartment building over its life cycle and estimated the range of emissions. In addition, the amount of construction waste was assessed, as was the effects of waste management and waste utilisation processes on GHG emissions. This report presents a summary of the results. According to this case study, GHG emissions can vary in typical multi-storey residential buildings within the range of 1 to 2.2 or 1 to 3.9 when the site foundation work also taken into account. The study shows that the construction materials and related processes contribute significantly to the GHG emissions of a building over its life cycle. In fact the level of significance is of the same order as the heating of spaces in an A-class energy performance building. The efficient recycling of materials can contribute to reductions in GHG emissions. The study showed that the estimated benefit was 9 % of the total life-cycle emissions. In the future, specific assessments of different types of waste could look at opportunities for the recycling and reuse of critical materials. Plastics and wood are especially important waste components. Future research topics include improving the use of recycled materials, collecting information on user experiences and enhancing quality

Construction quality assurance report for the Y-12 Construction/Demolition Landfill VII (CDL VII), Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Burton, P.M.

1994-11-01

This Construction Quality Assurance (CQA) Report provides documentation that Bid Option 2 of the Y-12 Plant Construction Demolition Landfill 7 (CDL-7) was constructed in substantial compliance with the Tennessee Department of Environment and Conservation (TDEC) approved design, as indicated and specified in the permit drawings, approved changes, and specifications. CDL-7 is located in Anderson County on the south side of Chestnut Ridge, approximately 0.5 miles south of the Y-12 Plant in Oak Ridge, Tennessee. This report applies specifically to the limits of excavation for Area No. 1 portions of the perimeter maintenance road and drainage channel and Sedimentation Pond No. 3. A partial ''As-Built'' survey was performed and is included

Improving Construction Process through Integration and Concurrent Engineering

Directory of Open Access Journals (Sweden)

Malik Khalfan

2012-11-01

Full Text Available In an increasingly competitive business environment, improvedtime-to-market, reduced production cost, quality of the productand customer involvement are rapidly becoming the key successfactors for any product development process. Consequently, mostorganisations are moving towards the adoption of latest technologyand new management concepts and philosophies such as totalquality management and concurrent engineering (CE to bringimprovement in their product development process. This paperdiscusses the adoption of integrated processes and CE withinthe construction industry to enable construction organisations toimprove their project development process. It also discusses aproposed integrated database model for the construction projects,which should enable the construction process to improve, becomemore effective and more efficient.

Sustainable Design and Construction of the Fernald Preserve Visitors Center

International Nuclear Information System (INIS)

Powell, J.; Sizemore, M.; Cornils, K.

2009-01-01

In September 2008, the Fernald Preserve Visitors Center was awarded the platinum certification level by the US Green Building Council (USGBC), the highest level achievable under the Leadership in Energy and Environmental Design New Construction and Major Renovations (LEED-NC) rating system. The Visitors Center, which is maintained and operated under the direction of the U.S. Department of Energy (DOE) Office of Legacy Management, is the first building in Ohio, the second DOE building and one of approximately 100 buildings worldwide to achieve platinum certification. As a sustainable building, the Visitors Center includes a ground source heat pump, a bio-treatment wetland system, recycled construction materials, native and no-irrigation plants and numerous other components to reduce energy, electricity, and water consumption and to lessen the building's impact on the environment. The building's conceptual design was originally developed by the University of Cincinnati's College of Design, Architecture, Art and Planning (DAAP), with input from the community, and the building was designed and built by the Megen Construction Company-glaserworks team, under the direction of S.M. Stoller, Corporation, the Legacy Management contractor for the Fernald Preserve and the DOE Office of Legacy Management. The project required a committed effort by all members of the project team. This is the first sustainable building constructed as part of the cleanup of the environmental legacy of the Cold War. The Visitors Center's exhibits, reading room, and programs will help to educate the community about the Fernald Preserve's environmental legacy and show how our decisions affect the environment. (authors)

Virtual reality simulation for construction safety promotion.

Science.gov (United States)

Zhao, Dong; Lucas, Jason

2015-01-01

Safety is a critical issue for the construction industry. Literature argues that human error contributes to more than half of occupational incidents and could be directly impacted by effective training programs. This paper reviews the current safety training status in the US construction industry. Results from the review evidence the gap between the status and industry expectation on safety. To narrow this gap, this paper demonstrates the development and utilisation of a training program that is based on virtual reality (VR) simulation. The VR-based safety training program can offer a safe working environment where users can effectively rehearse tasks with electrical hazards and ultimately promote their abilities for electrical hazard cognition and intervention. Its visualisation and simulation can also remove the training barriers caused by electricity's features of invisibility and dangerousness.

Students' Collective Knowledge Construction in the Virtual Learning Environment ""ToLigado"--Your School Interactive Newspaper"

Science.gov (United States)

Passarelli, Brasilina

2008-01-01

Introduction: The ToLigado Project--Your School Interactive Newspaper is an interactive virtual learning environment conceived, developed, implemented and supported by researchers at the School of the Future Research Laboratory of the University of Sao Paulo, Brazil. Method: This virtual learning environment aims to motivate trans-disciplinary…

Constructing a Successful Cross-National Virtual Learning Environment in Primary and Secondary Education

NARCIS (Netherlands)

Ligorio, Maria Beatrice; van Veen, Klaas

2006-01-01

Virtual environments are more and more used in primary schools. One of the most interesting potentialities of these environments is to foster cross-national applications. Yet, this specific feature is not fully exploited. This paper presents a successful virtual learning environment for primary

Seismic impact of the railway on the geotechnical constructions

Science.gov (United States)

Stolárik, Martin; Pinka, Miroslav

2017-09-01

Nowadays, the focus on more ecological means of material and persons transport is still higher. Big loads can be transported on railways more effectively and with lower environment impact than on roads. The geotechnical structures are inherent parts of railway infrastructure, such as embankments, sides of notches and, of course, tunnels, foundation constructions of buildings or pillars of bridges and the others geotechnical constructions (e.g. retaining walls, culverts, transition area of bridges). By train pass, vibrations are caused and these vibrations are relayed to the soil. These vibrations can make adverse impact to surrounding objects and to technologies placed in. This so far uncared-for influence gets into the foreground by current trend of everyday life technical equipment increasing. The article introduces different kinds of geotechnical structures and the influence of by-passing railway transport on their constructions and surroundings. The data are evaluated in the amplitude and frequency domain.

Sustainable Entrepreneurship in the Dutch Construction Industry

Directory of Open Access Journals (Sweden)

Rosalinde J.A. Klein Woolthuis

2010-02-01

Full Text Available This article discusses the strategies that sustainable entrepreneurs use to interact with their environment in the Dutch construction industry. The Dutch construction industry is under great pressure to move towards sustainability, and entrepreneurs are believed to be able to play a large role in this transition by introducing new products and new business practices. But how can entrepreneurs prosper in an environment that is not geared up towards such a change? And which strategies do they use to bend conditions in their favor? In this article we make use of the Market and System Failure Framework to analyze the pressures that entrepreneurs are confronted with when introducing sustainable innovations. We recognize that these pressures can be seen as bottlenecks, but that market and system failures can also create entrepreneurial opportunities. We interviewed 16 entrepreneurs in the Dutch construction industry to determine the influences they experienced from their environment and the strategies they use to deal with these. We conclude that we can distinguish between system building and following entrepreneurs, where the former aims to build a new system to challenge the old one, whereas the latter rather makes use of existing structures to build a business. We find that both strategies can be successful and that overall, the entrepreneurs confirm the belief that sustainability on people, planet and transparency aspects, can contribute very well to the long term profitability of the businesses the entrepreneurs are running. These in-depth insights into the influences from the context on the one hand, and the entrepreneurs’ strategic reactions on the other hand, contribute to our understanding of the interactions between entrepreneurs and the system context. This can help us to more effectively stimulate and support innovating entrepreneurs to contribute to the transition towards sustainability.

Tritium as tracer of flow in constructed wetlands

International Nuclear Information System (INIS)

Wachniew, P.; Czuprynski, P.; Maloszewski, P.

2005-01-01

Constructed wetlands technology is a cost-effective and environmentally friendly method used world-wide to treat waste waters of different origins. The soluble pollutants are transformed and removed mainly through the processes that occur at surfaces of plants, plant debris or filtering media. The efficiency of soluble pollutants removal is thus primarily related to the extent of contact between waste waters and the reactive surfaces. Residence time distributions function (RTD)is basic characteristic of wetland hydraulic properties and can be obtained by combined use of tracer technique and mathematical modelling. Tritium was used as to obtain RTD's of three parallel cells of a sub-surface flow constructed wetland overgrown with Pharagmites australis in Nowa Slupia. Tritium as a part of water molecule, is an ideal tracer of flow in the highly reactive environment of constructed wetlands. Results of the tracer test interpreted by the assumed model (Multi Flow Dispersion Model) of conservative solute transport revealed a complex structure of flow through the wetland. (author)

The Socio-Economics of Women Inclusion in Green Construction

Directory of Open Access Journals (Sweden)

Adedeji Olushola Afolabi

2017-03-01

Full Text Available The female population represents one of the greatest untapped resources for economic growth and revitalization in most sectors. The purpose of the study was to examine the socio-economics of women’s inclusion in green construction. The study utilized the use of questionnaires which were distributed to female professionals in the Nigerian construction industry. A total of 120 female construction professionals were used for this study. The data gathered was analysed using SPSS v17.0 with tests such as Frequencies, Percentages, Mean Score, ANOVA, and Factor Analysis. The result revealed a low level of participation by women in green construction. Women in construction exhibited moderate participation in Solar panel manufacturing, installation, and maintenance and in the enforcement of environmentally friendly practices on-site. The study revealed that the stressful nature of works, low interest from women, low career growth/progression and low investments in green works are significant barriers affecting women’s inclusion in green construction. In conclusion, the study identified three (3 socio-economic benefits of women’s inclusion in green construction. These are family/women related benefits, environment related benefits, and green energy market related benefits. The study suggested measures to increase women’s participation in green construction.

When constructions of the future meet curriculum development and teaching practice

DEFF Research Database (Denmark)

Rasmussen, Jens

in direction of still better learning outcomes, personal development and Bildung. On the other hand the educational system’s environment such as for example the economic system, the political system or other parts of the educational system requires outcomes that meet the needs of these systems as well...... and teaching practices that are especially suited to promote such selected constructs. How are these efforts met by curriculum development and how are they met by classroom practitioners? What happens when the constructions of future meets curriculum development and teaching practice?...

Construction managers' perceptions of construction safety practices in small and large firms: a qualitative investigation.

Science.gov (United States)

Gillen, Marion; Kools, Susan; McCall, Cade; Sum, Juliann; Moulden, Kelli

2004-01-01

Despite the institution of explicit safety practices in construction, there continue to be exceedingly high rates of morbidity and mortality from work-related injury. This study's purpose was to identify, compare and contrast views of construction managers from large and small firms regarding construction safety practices. A complementary analysis was conducted with construction workers. A semi-structured interview guide was used to elicit information from construction managers (n = 22) in a series of focus groups. Questions were designed to obtain information on direct safety practices and indirect practices such as communication style, attitude, expectations, and unspoken messages. Data were analyzed using thematic content analysis. Managers identified a broad commitment to safety, worker training, a changing workplace culture, and uniform enforcement as key constructs in maintaining safe worksites. Findings indicate that successful managers need to be involved, principled, flexible, and innovative. Best practices, as well as unsuccessful injury prevention programs, were discussed in detail. Obstacles to consistent safety practice include poor training, production schedules and financial constraints. Construction managers play a pivotal role in the definition and implementation of safety practices in the workplace. In order to succeed in this role, they require a wide variety of management skills, upper management support, and tools that will help them instill and maintain a positive safety culture. Developing and expanding management skills of construction managers may assist them in dealing with the complexity of the construction work environment, as well as providing them with the tools necessary to decrease work-related injuries.

Sustainable construction in rural Guatemala.

Science.gov (United States)

Temple, Ericka K; Rose, Elizabeth

2011-11-01

Waste management is a significant problem in Guatemala, as elsewhere in the developing world. The inappropriate disposal of solid waste produces pollution and places the environment and human health at risk. Environmental risk factors, including inadequate disposal of solid waste, are implicated in 25-30% of disease worldwide with children bearing a disproportionate burden of those diseases. Therefore, economic development which reduces inappropriate disposal of waste and affords economic opportunities may help reduce the global burden of disease on children. In the indigenous highlands of central Guatemala, a community supported non-profit organisation called Long Way Home (http://www.longwayhomeinc.org) is employing alternative construction techniques to build a vocational school complex. The construction of the school from waste materials demonstrates the use and principles of re-purposing materials, helps clean the environment and affords further educational and vocational opportunities. This article will outline the health problems inherent in an indigenous area of a developing country and will offer an alternative solution to reverse environmental risk factors associated with solid waste pollution and also actively improve child health.

Rethinking Constructive Journalism by Means of Service Journalism

DEFF Research Database (Denmark)

From, Unni; Kristensen, Nete Nørgaard

2018-01-01

This article argues that constructive journalism scholarship should look to service journalism and its subfields, cultural journalism and lifestyle journalism, to understand key characteristics of this newer type of journalism. Though constructive journalism is typically associated...... with the reporting of political and social issues, it is also seen to challenge traditional ways of writing about such hard news topics due to its positive and solution-oriented approach. In this respect, constructive journalism seems to reuse some of the approaches known from service journalism, especially in terms...... of audience address and an expanded social role for journalists. However, service journalism emerged in the increasingly commercialized and globalized media landscape of the post-WW2-period, whereas constructive journalism has emerged in the digital media landscape of the 2010s. These historical contexts...

AUTOMATIC CONSTRUCTION OF WI-FI RADIO MAP USING SMARTPHONES

Directory of Open Access Journals (Sweden)

T. Liu

2016-06-01

Full Text Available Indoor positioning could provide interesting services and applications. As one of the most popular indoor positioning methods, location fingerprinting determines the location of mobile users by matching the received signal strength (RSS which is location dependent. However, fingerprinting-based indoor positioning requires calibration and updating of the fingerprints which is labor-intensive and time-consuming. In this paper, we propose a visual-based approach for the construction of radio map for anonymous indoor environments without any prior knowledge. This approach collects multi-sensors data, e.g. video, accelerometer, gyroscope, Wi-Fi signals, etc., when people (with smartphones walks freely in indoor environments. Then, it uses the multi-sensor data to restore the trajectories of people based on an integrated structure from motion (SFM and image matching method, and finally estimates location of sampling points on the trajectories and construct Wi-Fi radio map. Experiment results show that the average location error of the fingerprints is about 0.53 m.

Environmental management of construction and demolition waste in Kuwait.

Science.gov (United States)

Kartam, Nabil; Al-Mutairi, Nayef; Al-Ghusain, Ibrahim; Al-Humoud, Jasem

2004-01-01

There is an increasing pressure on the construction industry to reduce costs and improve the quality of our environment. The fact is that both of these goals can be achieved at the same time. Although construction and demolition (C&D) constitutes a major source of waste in terms of volume and weight, its management and recycling efforts have not yet seen the light in Kuwait. This study focuses on recycling efforts leading to the minimization of the total C&D waste that is currently landfilled in Kuwait. This paper presents the current status of C&D waste disposal system in Kuwait and identifies the potential problems to the environment, people and economy. Then, it investigates alternative solutions to manage and control this major type of waste in an economically efficient and environmentally safe manner. Next, the paper describes the feasibility of establishing a C&D waste recycling facility in Kuwait. It concludes by highlighting the major benefits and bottleneck problems with such a recycling facility.

Factors affecting construction performance: exploratory factor analysis

Science.gov (United States)

Soewin, E.; Chinda, T.

2018-04-01

The present work attempts to develop a multidimensional performance evaluation framework for a construction company by considering all relevant measures of performance. Based on the previous studies, this study hypothesizes nine key factors, with a total of 57 associated items. The hypothesized factors, with their associated items, are then used to develop questionnaire survey to gather data. The exploratory factor analysis (EFA) was applied to the collected data which gave rise 10 factors with 57 items affecting construction performance. The findings further reveal that the items constituting ten key performance factors (KPIs) namely; 1) Time, 2) Cost, 3) Quality, 4) Safety & Health, 5) Internal Stakeholder, 6) External Stakeholder, 7) Client Satisfaction, 8) Financial Performance, 9) Environment, and 10) Information, Technology & Innovation. The analysis helps to develop multi-dimensional performance evaluation framework for an effective measurement of the construction performance. The 10 key performance factors can be broadly categorized into economic aspect, social aspect, environmental aspect, and technology aspects. It is important to understand a multi-dimension performance evaluation framework by including all key factors affecting the construction performance of a company, so that the management level can effectively plan to implement an effective performance development plan to match with the mission and vision of the company.

Construction and validation of the national survey on recreation and the environment's lifestyles scale

Science.gov (United States)

Gary T. Green; H. Ken Cordell; Carter J. Betz; Christine DiStefano

2007-01-01

This study sought to construct and validate a lifestyle scale that would capture for leisure professionals a more holistic picture of people's interests. A broader profile of their customers would allow recreation professionals to tailor information of their services. Public sector recreation managers would provide better serviced by learning about how customers...

Delivering construction projects using innovative building technologies

CSIR Research Space (South Africa)

Ampofo-Anti, Naalamkai

2017-07-01

Full Text Available . Figure 1: IBT delivery flowchart Proceedings 11th Built Environment Conference 6 th August – 8 th August 2017 Delivering construction projects using innovative building technologies Durban, South Africa 5. REFERENCES Ampofo-Anti, N...

Approach to the use of indicators for the assessment of the environmental level of construction products

OpenAIRE

Montes Delgado, María Victoria; Monterde Pereira, Daniel; Villoria Saez, Paola

2011-01-01

The European construction industry is supposed to consume the 40% of the natural European resources and to generate the 40% of the European solid waste. Conscious of the great damage being suffered by the environment because of construction activity, this work tries to provide the building actors with a new tool to improve the current situation. The tool proposed is a model for the comprehensive evaluation of construction products by determining their environmental level. In this researc...

Analyzing the Influence of the Construction Element Position on Torque Transmission by Friction

Directory of Open Access Journals (Sweden)

M. Jeremić

2014-09-01

Full Text Available This paper is analyzing the impact of the construction element position of ship winch drum on the effects of torque transmission by friction in the mechanization welding process. The driving and driven wheels (construction elements were examined for the general case of the load distribution. Based on this examination, the construction of the device that should provide the reliable torque transmission and the movement of the drum in the process of its welding are proposed. This construction is characterized by a high level of flexibility and ability to change the friction torque based on changing drum position in regard to the driving and driven wheels (construction elements. With this new construction, problems related to the movement synchronization are avoided, unlike the all previously known constructions of this type, which lead to the positive impact on the wear intensity of friction gears.

The Influence of Trust on Project Management Practice within the Construction Industry

OpenAIRE

Strahorn, Scott; Brewer, Graham; Gajendran, Thayaparan

2017-01-01

Given that any construction project is inherently a human endeavour, it follows that issues of trust are significant in terms of the stakeholder interactions that deliver eventual project outcomes.  Previous research indicates that the relational basis upon which projects are undertaken are intended to influence the likelihood of trusting relationships between stakeholders.  Thus, experiences of trust in a construction project environment are likely to be influenced by the contextual specific...

Construction management

CERN Document Server

Pellicer, Eugenio; Teixeira, José C; Moura, Helder P; Catalá, Joaquín

2014-01-01

The management of construction projects is a wide ranging and challenging discipline in an increasingly international industry, facing continual challenges and demands for improvements in safety, in quality and cost control, and in the avoidance of contractual disputes. Construction Management grew out of a Leonardo da Vinci project to develop a series of Common Learning Outcomes for European Managers in Construction. Financed by the European Union, the project aimed to develop a library of basic materials for developing construction management skills for use in a pan-European context. Focused exclusively on the management of the construction phase of a building project from the contractor's point of view, Construction Management covers the complete range of topics of which mastery is required by the construction management professional for the effective delivery of new construction projects. With the continued internationalisation of the construction industry, Construction Management will be required rea...

Near Field Environment Process Model Report

Energy Technology Data Exchange (ETDEWEB)

R.A. Wagner

2000-11-14

Waste emplacement and activities associated with construction of a repository system potentially will change environmental conditions within the repository system. These environmental changes principally result from heat generated by the decay of the radioactive waste, which elevates temperatures within the repository system. Elevated temperatures affect distribution of water, increase kinetic rates of geochemical processes, and cause stresses to change in magnitude and orientation from the stresses resulting from the overlying rock and from underground construction activities. The recognition of this evolving environment has been reflected in activities, studies and discussions generally associated with what has been termed the Near-Field Environment (NFE). The NFE interacts directly with waste packages and engineered barriers as well as potentially changing the fluid composition and flow conditions within the mountain. As such, the NFE defines the environment for assessing the performance of a potential Monitored Geologic Repository at Yucca Mountain, Nevada. The NFe evolves over time, and therefore is not amenable to direct characterization or measurement in the ambient system. Analysis or assessment of the NFE must rely upon projections based on tests and models that encompass the long-term processes of the evolution of this environment. This NFE Process Model Report (PMR) describes the analyses and modeling based on current understanding of the evolution of the near-field within the rock mass extending outward from the drift wall.

Studies on Labour Safety in Construction Sites

Directory of Open Access Journals (Sweden)

S. Kanchana

2015-01-01

Full Text Available Construction industry has accomplished extensive growth worldwide particularly in past few decades. For a construction project to be successful, safety of the structures as well as that of the personnel is of utmost importance. The safety issues are to be considered right from the design stage till the completion and handing over of the structure. Construction industry employs skilled and unskilled labourers subject to construction site accidents and health risks. A proper coordination between contractors, clients, and workforce is needed for safe work conditions which are very much lacking in Indian construction companies. Though labour safety laws are available, the numerous accidents taking place at construction sites are continuing. Management commitment towards health and safety of the workers is also lagging. A detailed literature study was carried out to understand the causes of accidents, preventive measures, and development of safe work environment. This paper presents the results of a questionnaire survey, which was distributed among various categories of construction workers in Kerala region. The paper examines and discusses in detail the total working hours, work shifts, nativity of the workers, number of accidents, and type of injuries taking place in small and large construction sites.

Studies on Labour Safety in Construction Sites

Science.gov (United States)

Kanchana, S.; Sivaprakash, P.; Joseph, Sebastian

2015-01-01

Construction industry has accomplished extensive growth worldwide particularly in past few decades. For a construction project to be successful, safety of the structures as well as that of the personnel is of utmost importance. The safety issues are to be considered right from the design stage till the completion and handing over of the structure. Construction industry employs skilled and unskilled labourers subject to construction site accidents and health risks. A proper coordination between contractors, clients, and workforce is needed for safe work conditions which are very much lacking in Indian construction companies. Though labour safety laws are available, the numerous accidents taking place at construction sites are continuing. Management commitment towards health and safety of the workers is also lagging. A detailed literature study was carried out to understand the causes of accidents, preventive measures, and development of safe work environment. This paper presents the results of a questionnaire survey, which was distributed among various categories of construction workers in Kerala region. The paper examines and discusses in detail the total working hours, work shifts, nativity of the workers, number of accidents, and type of injuries taking place in small and large construction sites. PMID:26839916

Study on Oxygen Supply Standard for Physical Health of Construction Personnel of High-Altitude Tunnels

Directory of Open Access Journals (Sweden)

Chun Guo

2015-12-01

Full Text Available The low atmospheric pressure and low oxygen content in high-altitude environment have great impacts on the functions of human body. Especially for the personnel engaged in complicated physical labor such as tunnel construction, high altitude can cause a series of adverse physiological reactions, which may result in multiple high-altitude diseases and even death in severe cases. Artificial oxygen supply is required to ensure health and safety of construction personnel in hypoxic environments. However, there are no provisions for oxygen supply standard for tunnel construction personnel in high-altitude areas in current tunnel construction specifications. As a result, this paper has theoretically studied the impacts of high-altitude environment on human bodies, analyzed the relationship between labor intensity and oxygen consumption in high-altitude areas and determined the critical oxygen-supply altitude values for tunnel construction based on two different standard evaluation systems, i.e., variation of air density and equivalent PIO2. In addition, it has finally determined the oxygen supply standard for construction personnel in high-altitude areas based on the relationship between construction labor intensity and oxygen consumption.

42 CFR 485.723 - Condition of participation: Physical environment.

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Condition of participation: Physical environment... participation: Physical environment. The building housing the organization is constructed, equipped, and..., sanitary, and comfortable environment. (a) Standard: Safety of patients. The organization satisfies the...

The Case for Family-Friendly Work Practices in the Australian Construction Industry

Directory of Open Access Journals (Sweden)

Valerie Francis

2012-11-01

Full Text Available Although significant changes at the social, demographic, technological and workforce levelshave transformed the relationship between family and work, these changes have notbeen reflected in the employment practices of many construction companies. Many of thejob and organisational factors found to be negatively associated with family functioning arepertinent to construction professionals. Staff are expected to work long hours in demandingroles and this, combined with job insecurity and frequent relocation, means that familylife and individual well-being can be compromised. A growing body of research has foundthat the implementation of family-friendly work policies and practices can lead to greaterproductivity, lower attrition rates and higher morale in the workplace. In addition providinga work environment that is supportive of workers' family roles can help to alleviate workrelatedmental health problems.This paper outlines the changing demographic trends and societal attitudes that are makingindividuals and organisations question current work cultures and structures. Optionsfor making the construction industry a more family-friendly work environment are considered.All professionals, regardless of their age, gender and family responsibilities, canbenefit from these initiatives. The paper concludes by discussing the implications of theseissues for construction companies and future research work.

Large-size deployable construction heated by solar irradiation in free space

Science.gov (United States)

Pestrenina, Irena; Kondyurin, Alexey; Pestrenin, Valery; Kashin, Nickolay; Naymushin, Alexey

Large-size deployable construction in free space with subsequent direct curing was invented more than fifteen years ago (Briskman et al., 1997 and Kondyurin, 1998). It caused a lot of scientific problems, one of which is a possibility to use the solar energy for initiation of the curing reaction. This paper is devoted to investigate the curing process under sun irradiation during a space flight in Earth orbits. A rotation of the construction is considered. This motion can provide an optimal temperature distribution in the construction that is required for the polymerization reaction. The cylindrical construction of 80 m length with two hemispherical ends of 10 m radius is considered. The wall of the construction of 10 mm carbon fibers/epoxy matrix composite is irradiated by heat flux from the sun and radiates heat from the external surface by the Stefan- Boltzmann law. A stage of polymerization reaction is calculated as a function of temperature/time based on the laboratory experiments with certified composite materials for space exploitation. The curing kinetics of the composite is calculated for different inclination Low Earth Orbits (300 km altitude) and Geostationary Earth Orbit (40000 km altitude). The results show that • the curing process depends strongly on the Earth orbit and the rotation of the construction; • the optimal flight orbit and rotation can be found to provide the thermal regime that is sufficient for the complete curing of the considered construction. The study is supported by RFBR grant No.12-08-00970-a. 1. Briskman V., A.Kondyurin, K.Kostarev, V.Leontyev, M.Levkovich, A.Mashinsky, G.Nechitailo, T.Yudina, Polymerization in microgravity as a new process in space technology, Paper No IAA-97-IAA.12.1.07, 48th International Astronautical Congress, October 6-10, 1997, Turin Italy. 2. Kondyurin A.V., Building the shells of large space stations by the polymerisation of epoxy composites in open space, Int. Polymer Sci. and Technol., v.25, N4

Study of the reuse of construction residues in concrete employed by blocks manufacture

Directory of Open Access Journals (Sweden)

R. C. C. Lintz

Full Text Available The use of construction and demolition waste (CDR comes as an alternative for recycling, for costs reduction and for raw material. The CONAMA Resolution 307 (National Council for the Environment establishes that all cities should find an environmentally correct destination to CDR. In this research the mechanical properties of the concrete containing CDR were analyzed aiming its use in the production of concrete blocks. Here, increasing percentages of aggregates of CDR with the same granulometry an substitute the natural aggregate, and then concrete blocks were molded. Tests were then performed in order to determine the compression strength according to NBR 12118:2007, at ages of 14 days and 28 days. It was noticed that the values resulting from the compression strength test were also influenced by the increasing substitution of CDR percentages to the mixture. This research discusses the great potential of using this material in substitution to the natural aggregates used in the production of concrete based materials such as blocks.

A climatic environmental performance assessment method for ecological city construction: Application to Beijing Yanqi Lake

Directory of Open Access Journals (Sweden)

Xiao-Yi Fang

2015-03-01

Full Text Available In contrast to the input perspective for evaluating planning metrics, this research takes the climatic environmental output effects as the starting point for assessing ecological city construction. Based on approaches such as observation data analysis, meteorological model simulation, and remote sensing, a set of climatic environmental performance assessment methods is developed and established. These methods mainly focus on surface ventilation assessment and urban thermal environment assessment. With the Yanqi Lake ecological development demonstration area located in Huairou district, Beijing as an example, the assessment of the local climatic environment before and after the construction are conducted, and relevant policy suggestions for urban planning and construction are presented. The results show that after development, the ventilation capacity will decrease overall and the ventilation potential index will decrease from 0.53 to 0.44. While this is not a large reduction, and is still at a favorable level, the ventilation potential in some local areas will markedly decrease. Furthermore, the thermal environment will become poorer to some extent; the urban heat island (UHI area and intensity will increase compared with the current situation; continuous heat islands may occur in local areas; the UHI potential index of the core area will rise from 0.0878 to 0.1217 (still a favorable level. Therefore, urban surfaces should be carefully developed and arranged during planning. It is suggested that the negative impacts of large areas of urban construction on the local climatic environment in the Yanqi Lake could be mitigated by 1 strengthening the airflow by introducing fresh, cold, northwesterly air via constructed ventilation corridors, 2 increasing the number of ecological cold sources, particularly for water bodies and green belts to prevent the UHI in the southern region of Yanqi Lake from becoming linked with each other, and 3 considering a

Safety in construction industry - overview

International Nuclear Information System (INIS)

Chockalingam, S.; Nehru, R.M.; Ramprasad, K.; Sonawane, A.U.

2016-01-01

The construction industry plays an important role in the social and economic development in a country. Safety in the construction industry is considered a major issue in developed and developing countries. In urban sector of India increasing numbers of workers have taken up construction work as a means of immediate employment, which provides cash earnings at the end of the day. Being as unorganized sector, the fatal injuries in DAE unit for the construction industry (Nuclear Power Project including BHAVINI: 62.7% from 1999 to 2014) is higher than the category for all other units (UCIL:13.3%; ECIL:6.7%; NFC and ZC: 4%; HWP: 2.7%; IREL:2.7%; Nuclear Power Plant: 2.7% etc., from 1999 to 2014). A variety hazards exist in the construction site. The best way to protect workers against workers against hazards is to control problems at the source. The problem regarding construction industry is not that the hazards and risks are unknown, but it very difficult to accurately identify in a constantly changing work environment. To prevent hazards at work, all possible hazards that may be encountered should be identified in advance through Job Hazard Analysis (JHA). The present scenario has deduced a fact that efficient Safety Management Techniques (SMT) are (essential for today's construction companies and adaptation of legal requirements including regulatory requirements and proactive safety management techniques will help organizations in providing a better workplace to its employees and reduce the accidents. (author)

[Construction of an educational technology for teaching about nursing on peripheral venipuncture].

Science.gov (United States)

Frota, Natasha Marques; Barros, Lívia Moreira; de Araújo, Thiago Moura; Caldini, Luana Nunes; do Nascimento, Jennara Cândido; Caetano, Joselany Afio

2013-06-01

The aim of the study was to describe the construction of a course on peripheral venipuncture using the Information and Communication Technologies. This is a methodological research, developed at the Federal University of Ceara from January to March 2012. The construction phases are: the analysis, design and development according to the theoretical framework of Galvis-Panqueva. In the analysis, objectives, content target audience, the study environment and technology infrastructure were delimited. During the design phase the environment interface and navigation structure of the course were evaluated. The development consisted in the materialization of all that was designed in the previous phase Once all three phases of construction of the course were conducted it was available in the Virtual Learning Environment SOLAR. The finalproduct of the course is presented as support of nursing students and consequently the training of future nurses in their care practice on peripheral venipuncture.

Ecological Environment in Terms of Human Behavior

OpenAIRE

Chen, Xiaogang; Zhou, Dehu; Lin, Hui

2013-01-01

In terms of human behavior, company and government policy, it is proposed that the ecological behavior of human being is the basis of influence on the ecological environment construction in Poyang Lake and measures to ensure the sustainable development of ecological environment in Poyang Lake.

Reduction of construction periods of PWRs by optimization of detailed sequence planning

International Nuclear Information System (INIS)

Stocker, W.; Leverenz, R.

1991-01-01

The construction of PWR's is an enterprise with high investment costs, in total up to three billion US$ and with long construction periods of five years and more. Besides the results reached by the intensive standardization, a further reduction of the construction period is possible by optimization of detailed sequence planning and interfaces of work units. During the execution of the three German Convoy plants ISAR 2, EMSLAND and NECKARWESTHEIM 2, the contractual construction periods were shortened between 4 and 8 months. These reductions were reached after individual investigations by measures like advanced finishing work activities; erection of an increased amount of prefabricated pipings; rearrangement of erection sequences; overlapping of piping erection and electrical installation; reduction of plant commissioning period. All these measures support directly the reduction of the total investment cost of a plant, as already demonstrated by the Convoy plants. (author). 8 figs

Avaliando desempenho de espaços de trabalho sob o enfoque da ergonomia do ambiente construído: an ergonomic assessment of the constructed environment Measuring performance of work spaces

Directory of Open Access Journals (Sweden)

Vilma Villarouco

2008-12-01

Full Text Available Representando segmento recente da ergonomia, os estudos que cuidam da adequabilidade do ambiente construído à realização das tarefas que abriga, vem agregando profissionais preocupados com a satisfação do usuário/trabalhador e com o incremento da produtividade focada em melhores condições de trabalho. Embora apresentando preocupações presentes em outras áreas do conhecimento, a ergonomia do ambiente extrapola as questões puramente arquitetônicas, focando seu posicionamento na adaptabilidade e conformidade do espaço ao trabalho que nele é desenvolvido. Nesse sentido, evoca elementos do conforto ambiental, da antropometria, da psicologia ambiental, da ergonomia cognitiva e da AET (Análise Ergonômica do Trabalho. Nesse contexto, este artigo propõe uma metodologia de Avaliação Ergonômica do Ambiente Construído, seguida de sua aplicação através de um estudo de caso, que busca inclusive a identificação da interferência da configuração espacial de ambientes de trabalho na produtividade de um sistema de produção, a partir de uma análise ergonômica do ambiente construído.Representing a recent segment of ergonomics, studies that address the suitability of the constructed environment to the tasks performed within it have been uniting professionals concerned with the user/worker satisfaction and increased productivity focused on better working conditions. Although it presents concerns from other fields of knowledge, environment ergonomics extrapolates purely architectural issues and focuses its positioning on the adaptability and conformity of the physical space to the work developed within it. It therefore addresses elements of environment comfort, anthropometry, environmental psychology, cognitive ergonomics and ergonomic work analysis. The present article proposes a methodology for an Ergonomic Assessment of the Constructed Environment, followed by its application through a case study that also aims to identify the

Virtual Learning Environments: A View from the Theory of Conceptual Fields

Directory of Open Access Journals (Sweden)

Iralí Araque

2018-01-01

Full Text Available The inclusion of communication and information technologies for formative purposes has given way to virtual learning environments, which, backed by constructivist theories, provide a theoretical and methodological framework, thus contributing to the cognitive development of students at university level, evidenced in the development of their learning schemes. The theory of conceptual fields offers an analysis of the elements of schemas and the process of knowledge construction. In this sense, the present work had as objective to raise some elements, such as teaching methodology, didactic strategies, materials and resources for learning, teacher and student roles, which should be considered in the design of virtual learning environments, in the light of the theory of conceptual fields, so as to enhance the construction of knowledge and where the emphasis of the educational process lies on learning rather than teaching. The methodology used is a documentary study, type descriptive, based on the review and bibliographical analysis of constructivist theories, as well as researchers related to the design and construction of virtual learning environments. The results show that conceptual fields theory is an excellent option to consider, as a constructivist theory, in order to consolidate the process of knowledge construction, from the individual to the collective.

The de-construction programme for EDF'S first generation power plants

International Nuclear Information System (INIS)

Zask, G.; Corcuff, A.

2003-01-01

risks; 4.3.8. Compiling feedback; 4.4. Conclusion. In conclusion the new dismantling strategy adopted at the beginning of 2001, as well as the sequence of operations in the de-construction programme that arise from it, are not the result of priorities or emergencies associated with the safety of the installations. They arise from certain of EDF's previous commitments, incorporate a logic of acquiring feedback with a view to optimising operations and take account of the reality of each project with the will to accomplish the programme within a time span of approximately 25 years. This strategy of a continuous sequence of stages has several advantages: It avoids leaving possible questions of safety and environment in abeyance, it provides, in what constitutes a key period for keeping the nuclear option open (2000 - 2020), the concrete demonstration of the financial and industrial feasibility (technical mastery) of de-construction. Indeed, EDF is financing the de-construction of its first generation power plants before undertaking the investments required for the renewal of the pool of PWR plants in operation. It is preparing the future de-construction of the pool of PWR plants by forming and fine tuning and industrial de-construction organisation that is well suited to its mission and efficient in its execution. It encourages making new channels available for the disposal of nuclear waste. As a matter of fact and two years after the decision was taken to engage the de-construction programme of the power plants that have ceased commercial operation, and by giving visibility in the long term to all those involved, we consider that the conditions are favourably settled to achieve this programme under satisfactory industrial conditions of safety, radioprotection, wastes management, economics

Development of a group work assessment pedagogy using constructive alignment theory.

Science.gov (United States)

Croy, Suzanne R

2018-02-01

The purpose of this paper is to explore group work assessment underpinned by constructive alignment theory to develop a new assessment pedagogy. A review was undertaken of an existing module 'Mental Health Nursing 1', with student nurses participating in the BSc (Hons) Nursing Programme. Constructive alignment theory requires teachers to adopt a deep approach to learning where module learning outcomes are aligned with the teaching environment and modes of assessment. As the module progressed, reviewing the Mental Health Nursing 1 module became an excellent opportunity to begin to understand how constructive alignment theory can inform a group work assessment pedagogy. Working using a constructively aligned assessment process became a valuable learning experience for the module leader whilst at the same time revealed a gap in the research around the impact of constructively aligned teaching and group work assessment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Constructing Aligned Assessments Using Automated Test Construction

Science.gov (United States)

Porter, Andrew; Polikoff, Morgan S.; Barghaus, Katherine M.; Yang, Rui

2013-01-01

We describe an innovative automated test construction algorithm for building aligned achievement tests. By incorporating the algorithm into the test construction process, along with other test construction procedures for building reliable and unbiased assessments, the result is much more valid tests than result from current test construction…

Construction of a mouse model of factor VIII deficiency by gene targeting

Energy Technology Data Exchange (ETDEWEB)

Bi, L.; Lawler, A.; Gearhart, J. [Univ. of Pennsylvania School of Medicine, Philadelphia, PA (United States)] [and others

1994-09-01

To develop a small animal model of hemophilia A for gene therapy experiments, we set out to construct a mouse model for factor VIII deficiency by gene targeting. First, we screened a mouse liver cDNA library using a human FVIII cDNA probe. We cloned a 2.6 Kb partial mouse factor VIII cDNA which extends from 800 base pairs of the 3{prime} end of exon 14 to the 5{prime} end of exon 26. A mouse genomic library made from strain 129 was then screened to obtain genomic fragments covering the exons desired for homologous recombination. Two genomic clones were obtained, and one covering exon 15 through 22 was used for gene targeting. To make gene targeting constructs, a 5.8 Kb genomic DNA fragment covering exons 15 to 19 of the mouse FVIII gene was subcloned, and the neo expression cassette was inserted into exons 16 and 17 separately by different strategies. These two constructs were named MFVIIIC-16 and MFVIIIC-17. The constructs were linearized and transfected into strain 129 mouse ES cells by electroporation. Factor VIII gene-knockout ES cell lines were selected by G-418 and screened by genomic Southern blots. Eight exon 16 targeted cell lines and five exon 17 targeted cell lines were obtained. Three cell lines from each construct were injected into blastocysts and surgically transferred into foster mothers. Multiple chimeric mice with 70-90% hair color derived from the ES-cell genotype were seen with both constructs. Germ line transmission of the ES-cell genotype has been obtained for the MFVIIIC-16 construct, and multiple hemophilia A carrier females have been identified. Factor VIII-deficient males will be conceived soon.

PHWR safety: design, siting and construction

International Nuclear Information System (INIS)

Sharma, V.K.

2002-01-01

In all activities associated with NPPs viz. siting, design, construction, commissioning and operation, safety is given overriding importance. The safety design principles of PHWRs are based on defence-in-depth approach, physical and functional separation between process and safety systems and also among various safety systems, redundancy to meet single failure criteria and postulation of a number of design basis events for which the plant must be designed. Apart from engineered safety systems, PHWRs have inherent characteristics which contribute to safety. In siting of a NPP, it is required to ensure that the given site does not pose undue radiological hazard to public and the environment both during normal operation as well as during and following an accident condition. For this purpose, all site related external events, both natural and man induced, are assessed for their effect on the plant and are considered as part of the design basis. Possible radiological impact of the NPP on environment and surrounding population is assessed and ensured to be within acceptable limits. During construction phase, it is essential that the NPP be built in accordance with design intent and with required quality of workmanship to ensure that the NPP will remain safe during all states of operation. This is achieved through careful execution and QA activities encompassing all aspects of component fabrication at manufacturer works, civil construction, site erection, assembly, and commissioning. Future trends in nuclear safety will continue to be based on existing principles which have proved to be sound. These will be further strengthened by features such as increasing use of passive means of performing safety functions and a more explicit treatment of severe accidents. (author)

Micro-Masonry: Construction of 3D Structures by Mesoscale Self-Assembly

Science.gov (United States)

Fernandez, Javier G.; Khademhosseini, Ali

2010-01-01

A general method for construction of three dimensional structures by directed assembly of microscale polymeric sub-units is presented. Shape-controlled microgels are directed to assemble into different shapes by limiting their movement onto a molded substrate. The capillary forces, resulting from the presence of a liquid polymer, assemble the microgels in close contact with the rest of the units and with the free surface, the latter imposing the final geometry of the resulting construct. The result is a freestanding structure composed of one or multiple layers of sub-units assembled in a tightly packed conformation. The applicability of the technique for the construction of scaffolds with cell-laden sub-units is demonstrated. In addition, scaffolds formed by the sequential aggregation of sub-units are produced. PMID:20440697

MONITORING AND CONTROLLING ON SURFACE SETTLEMENT IN SAND AND GRAVEL STRATA CAUSED BY SUBWAY STATION CONSTRUCTION APPLYING PIPE-ROOF PRE-CONSTRUCTION METHOD (PPM

Directory of Open Access Journals (Sweden)

Xian Yang

2017-07-01

Full Text Available Pipe-roof Pre-construction Method (PPM is regarded as a safer method to construct underground space, especially suitable for the construction sites with dense surface buildings, underground pipelines and complicated geological conditions. Xinleyizhi Station of Shenyang Metro constructed by PPM. In order to ensure safety in construction, the whole construction process was closely monitored. In this paper, monitoring results of surface settlement in PPM is analyzed. According to the monitoring results, the most serious settlement occurred in pipes jacking, which was the first and the most crucial step in PPM. The settlement reasons in each step are discussed, and controlling methods of surface settlement in each step are elaborated. Through close monitoring and timely control, the construction of Xinleyizhi Station completed smoothly. Because of the obvious advantages of PPM, the method will be used more widely in construction of shallow buried excavation under complicated surrounding and geological conditions.

Construction materials and Radon

International Nuclear Information System (INIS)

Paschuk, Sergei A.; Correa, Janine Nicolosi; Loriane, Fior; Schelin, Hugo R.; Pottker, Fabiana; Paula Melo, Vicente de

2008-01-01

Full text: Current studies have been performed with the aim to find the correlation of radon concentration in the air and used construction materials. At the first stage of the measurements different samples of materials used in civil construction were studied as a source of radon in the air and at the second step it was studied the radon infiltration insulation using different samples of finishing materials. For 222 Rn concentration measurements related to different construction materials as well as for the studies of radon emanation and its reduction, the sealed cell chambers, of approximately 60 x 60cm 2 , have been built using the ceramic and concrete blocks. This construction has been performed within protected and isolated laboratory environment to maintain the air humidity and temperature stable. These long term measurements have been performed using polycarbonate alpha track passive detectors. The exposure time was set about 15 days considering previous calibration performed at the Institute of Radiation Protection and Dosimetry (IRD/CNEN), where the efficiency of 70% was obtained for the density of alpha particle tracks about 13.8 cm -2 per exposure day and per kBq/m 3 of radon activity concentration. The chemical development of alpha tracks has been achieved by electrochemical etching. The track identification and counting have been done using a code based on the MATLAB Image Processing Toolbox. The cell chambers have been built following four principle steps: 1) Assembling the walls using the blocks and mortar; 2) Plaster installation; 3) Wall surface finishing using the lime; 4) Wall surface insulation by paint. Making the comparison between three layers installed at the masonry walls from concrete and ceramic blocks, it could be concluded that only wall painting with acrylic varnish attended the expectation and reduced the radon emanation flow by the factor of 2.5 approximately. Studied construction materials have been submitted the instant

Reduction of construction wastes by improving construction contract management: a multinational evaluation.

Science.gov (United States)

Mendis, Daylath; Hewage, Kasun N; Wrzesniewski, Joanna

2013-10-01

The Canadian construction industry generates 30% of the total municipal solid waste deposited in landfills. Ample evidence can be found in the published literature about rework and waste generation due to ambiguity and errors in contract documents. Also, the literature quotes that disclaimer clauses in contract documents are included in the contractual agreements to prevent contractor claims, which often cause rework. Our professional practice has also noted that there are several disclaimer clauses in standard contract documents which have the potential to cause rework (and associated waste). This article illustrates a comparative study of standard contractual documents and their potential to create rework (and associated waste) in different regions of the world. The objectives of this study are (1) to analyse standard contractual documents in Canada, the USA and Australia in terms of their potential to generate rework and waste, and (2) to propose changes/amendments to the existing standard contract documents to minimise/avoid rework. In terms of construction waste management, all the reviewed standard contract documents have deficiencies. The parties that produce the contract documents include exculpatory clauses to avoid the other party's claims. This approach tends to result in rework and construction waste. The contractual agreements/contract documents should be free from errors, deficiencies, ambiguity and unfair risk transfers to minimise/avoid potential to generate rework and waste.

THE NICHE CONSTRUCTION PERSPECTIVE: A CRITICAL APPRAISAL*

Science.gov (United States)

Scott-Phillips, Thomas C; Laland, Kevin N; Shuker, David M; Dickins, Thomas E; West, Stuart A

2014-01-01

Niche construction refers to the activities of organisms that bring about changes in their environments, many of which are evolutionarily and ecologically consequential. Advocates of niche construction theory (NCT) believe that standard evolutionary theory fails to recognize the full importance of niche construction, and consequently propose a novel view of evolution, in which niche construction and its legacy over time (ecological inheritance) are described as evolutionary processes, equivalent in importance to natural selection. Here, we subject NCT to critical evaluation, in the form of a collaboration between one prominent advocate of NCT, and a team of skeptics. We discuss whether niche construction is an evolutionary process, whether NCT obscures or clarifies how natural selection leads to organismal adaptation, and whether niche construction and natural selection are of equivalent explanatory importance. We also consider whether the literature that promotes NCT overstates the significance of niche construction, whether it is internally coherent, and whether it accurately portrays standard evolutionary theory. Our disagreements reflect a wider dispute within evolutionary theory over whether the neo-Darwinian synthesis is in need of reformulation, as well as different usages of some key terms (e.g., evolutionary process). PMID:24325256

Construction of overseas nuclear power plants for first time by Japanese industry

International Nuclear Information System (INIS)

Maruyama, Tohru; Naruse, Yoshihiro; Yabuta, Hitoshi

2010-01-01

In response to the worldwide demand for stable energy supplies and the reduction of greenhouse gas emissions, nuclear power plant construction projects have been expanding on a global scale. Even in the United States, where no nuclear power plants have been constructed over the past 30 years, there are plans for the construction of more than 30 plants. Toshiba has been awarded a contract for a nuclear power plant construction project in the U.S., the first case of overseas nuclear power plant construction by Japanese industry. Toshiba America Nuclear Energy Corporation (TANE), the first U.S. subsidiary in our nuclear business, located in Charlotte, North Carolina, is engaged in this globally prominent project, applying various technologies and know-how that we have cultivated over many years of experience in developing and constructing nuclear power plants in Japan and adapting them to U.S. business practices, laws, and regulations. (author)

DNA recognition by synthetic constructs.

Science.gov (United States)

Pazos, Elena; Mosquera, Jesús; Vázquez, M Eugenio; Mascareñas, José L

2011-09-05

The interaction of transcription factors with specific DNA sites is key for the regulation of gene expression. Despite the availability of a large body of structural data on protein-DNA complexes, we are still far from fully understanding the molecular and biophysical bases underlying such interactions. Therefore, the development of non-natural agents that can reproduce the DNA-recognition properties of natural transcription factors remains a major and challenging goal in chemical biology. In this review we summarize the basics of double-stranded DNA recognition by transcription factors, and describe recent developments in the design and preparation of synthetic DNA binders. We mainly focus on synthetic peptides that have been designed by following the DNA interaction of natural proteins, and we discuss how the tools of organic synthesis can be used to make artificial constructs equipped with functionalities that introduce additional properties to the recognition process, such as sensing and controllability. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Survey dataset on occupational hazards on construction sites

Directory of Open Access Journals (Sweden)

Patience F. Tunji-Olayeni

2018-06-01

Full Text Available The construction site provides an unfriendly working conditions, exposing workers to one of the harshest environments at a workplace. In this dataset, a structured questionnaire was design directed to thirty-five (35 craftsmen selected through a purposive sampling technique on various construction sites in one of the most populous cities in sub-Saharan Africa. The set of descriptive statistics is presented with tables, stacked bar chats and pie charts. Common occupational health conditions affecting the cardiovascular, respiratory and musculoskeletal systems of craftsmen on construction sites were identified. The effects of occupational health hazards on craftsmen and on construction project performance can be determined when the data is analyzed. Moreover, contractors’ commitment to occupational health and safety (OHS can be obtained from the analysis of the survey data. Keywords: Accidents, Construction industry, Craftsmen, Health, Occupational hazards

Energy and environment design guide

Energy Technology Data Exchange (ETDEWEB)

Harman, K. [Royal Australian Institute of Architects, Canberra, ACT (Australia)

1996-04-01

The Royal Australian Institute of Architects (RAIA) released an Environment Policy for architects in September 1994 which forms part of the RAIA Code of Professional Conduct. Prior to releasing the policy, it was recognised that members needed information and education in the area of energy and environment in order to adopt and implement the guide. This document is a report on the scope, work programme and achievements of a project to provide an easy reference resource for architects and other building designers, and bring together a wide range of information and research. It includes the Environment Policy as an appendix. The project produced 24 notes entitled the `Environment Design Guide - energy/environment notes` covering a wide range of topics, and four newsletters. Feedback received from architects to date indicates that the development of the notes has had a positive effect on their knowledge of these issues, resulting in the making of informed design decisions. The topics covered by the notes are expected to expand in 1996 with the preparation of additional notes which provide information on products and sustainable construction.

Challenges of UK/Irish Contractors regarding Material Management and Logistics in Confined Site Construction

OpenAIRE

Spillane, John P; Oyedele, Lukumon O; Von Meding, Jason; Konanahalli, Ashwini; Jaiyeoba, Babatunde E; Tijani, Iyabo K

2011-01-01

The aim of this paper is to identify the various managerial issues encountered by UK/Irish contractors in the management of materials in confined urban construction sites. Through extensive literature review, detailed interviews, case studies, cognitive mapping, causal loop diagrams, questionnaire survey and documenting severity indices, a comprehensive insight into the materials management concerns within a confined construction site environment is envisaged and portrayed. The leading issues...

[Impact of maternal HIV status on family constructions and the infant's relational environment during the perinatal period].

Science.gov (United States)

Trocmé, N; Courcoux, M-F; Tabone, M-D; Leverger, G; Dollfus, C

2013-01-01

To assess whether maternal HIV-positive status negatively affects family construction and the child's psychological environment. Could this be responsible for behavioral problems observed in children infected with or affected by HIV? Interviews were conducted with 60 HIV+ mothers and their infants during the perinatal period, within 3 months of delivery, collected at the time of a pediatric outpatient visit within a PMTCT program. Half of the 60 mothers did not live with the infant's father, 56% of multiparous mothers were separated from their previous children. Sixty-five percent of the fathers were informed of the mother's HIV-positive status, although 90% of fathers who lived with the mothers were informed. During pregnancy, 80% of mothers reported psychological stress; after delivery, 72% of mothers suffered from not being allowed to breastfeed their infants, 43.5% expressed a fear of transmitting the infection to the child, and 40% avoided contacts with the infant. The impact of the mother's psychological stress and anxiety related to the risk of HIV transmission through breastfeeding and casual contacts were already noticeable in the first mother-child interrelations. Although the risk of MTC transmission in now very small, psychological troubles related to maternal HIV status may negatively affect the children's well-being and behavior, psychological support should be provided for mothers and children as part of comprehensive services. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

Large size space construction for space exploitation

Science.gov (United States)

Kondyurin, Alexey

2016-07-01

Space exploitation is impossible without large space structures. We need to make sufficient large volume of pressurized protecting frames for crew, passengers, space processing equipment, & etc. We have to be unlimited in space. Now the size and mass of space constructions are limited by possibility of a launch vehicle. It limits our future in exploitation of space by humans and in development of space industry. Large-size space construction can be made with using of the curing technology of the fibers-filled composites and a reactionable matrix applied directly in free space. For curing the fabric impregnated with a liquid matrix (prepreg) is prepared in terrestrial conditions and shipped in a container to orbit. In due time the prepreg is unfolded by inflating. After polymerization reaction, the durable construction can be fitted out with air, apparatus and life support systems. Our experimental studies of the curing processes in the simulated free space environment showed that the curing of composite in free space is possible. The large-size space construction can be developed. A project of space station, Moon base, Mars base, mining station, interplanet space ship, telecommunication station, space observatory, space factory, antenna dish, radiation shield, solar sail is proposed and overviewed. The study was supported by Humboldt Foundation, ESA (contract 17083/03/NL/SFe), NASA program of the stratospheric balloons and RFBR grants (05-08-18277, 12-08-00970 and 14-08-96011).

Co-operation an competition in the construction industry of the Netherlands

NARCIS (Netherlands)

Doree, Andries G.; Holmen, Elsebeth; Caerteling, Jasper; Greenwood, D

2003-01-01

In 2002, a Parliamentary Enquiry Committee exposed widespread collusion practices in the Dutch construction industry. The construction industry in the Netherlands is in turmoil and is seen as not living up to the standards that society requires. There seems to be a culture and an environment that

Needs Assessment--A Construction Management Bachelor of Science Degree in Alaska.

Science.gov (United States)

Gunderson, D. E.; Ra, J. W.; Schroeder, H.; Holland, H. R.

2002-01-01

Responses from 99 Alaskan contractors identified the number of entry-level construction management personnel needed, salaries, and desired skills. Skills identified will be used to develop a construction management curriculum specific to the Alaskan environment. Findings correlate with research predicting supply and demand for graduates nationwide…

Niche construction and the evolution of leadership

NARCIS (Netherlands)

Spisak, B.R.; O'Brien, M.; Nicholson, N.; van Vugt, M.

2015-01-01

We use the concept of niche construction - the process whereby individuals, through their activities, interactions, and choices, modify their own and each other's environments - as an example of how biological evolution and cultural evolution interacted to form an integrative foundation of modern

The role of environment design in an educational Multi-User Virtual Environment

DEFF Research Database (Denmark)

Papachristos, Nikiforos; Vrellis, Ioannis; Natsis, Antonios

2014-01-01

This paper presents empirical results from an exploratory study conducted in an authentic educational situation with preservice education students enrolled in an undergraduate course, which was partially taught in Second Life. The study investigated the effect of environment design on presence, l...... necessary for all students to become familiar with the virtual environment and possible time losses due to technical issues. This study could act as support to construct and test hypotheses regarding the role of educational setting design in teaching and learning in MUVEs....

A Study on the Rural Residence in the Northern Area of Zhejiang Province from the Perspective of Green Living Environment

Science.gov (United States)

Wang, J.; Gao, W. J.; Wang, C.

2018-05-01

At present, owing to the rapid development of rural construction, it lacks corresponding theories and practices and damages to the features of rural area, ignoring the geography, suitability and green living environment factors. The research selects rural residence as the object, defining “courtyard” as the basic unit for rural residence. It utilizes the principle of topology as the expanding media, by the method of principle of cellular structure and green living environment design strategy. The essay establishes the design and construction system of “rural basic unit”, combining functions and structures, prototype menu, chamber space and compound interface, from the perspective of green living environment. It aims to guide rural construction and protect the ruralliving environment.

Safety in numbers 7: Veni, vidi, duci: a grounded theory evaluation of nursing students' medication dosage calculation problem-solving schemata construction.

Science.gov (United States)

Weeks, Keith W; Higginson, Ray; Clochesy, John M; Coben, Diana

2013-03-01

This paper evaluates nursing students' transition through schemata construction and competence development in medication dosage calculation problem-solving (MDC-PS). We advance a grounded theory from interview data that reflects the experiences and perceptions of two groups of undergraduate pre-registration nursing students: eight students exposed to a prototype authentic MDC-PS environment and didactic transmission methods of education and 15 final year students exposed to the safeMedicate authentic MDC-PS environment. We advance a theory of how classroom-based 'chalk and talk' didactic transmission environments offered multiple barriers to accurate MDC-PS schemata construction among novice students. While conversely it was universally perceived by all students that authentic learning and assessment environments enabled MDC-PS schemata construction through facilitating: 'seeing' the authentic features of medication dosage problems; context-based and situational learning; learning within a scaffolded environment that supported construction of cognitive links between the concrete world of clinical MDC-PS and the abstract world of mathematics; and confidence-building in their cognitive and functional competence ability. Drawing on the principle of veni, vidi, duci (I came, I saw, I calculated), we combined the two sets of evaluations to offer a grounded theoretical basis for schemata construction and competence development within this critical domain of professional practice. Copyright © 2012 Elsevier Ltd. All rights reserved.

Under Construction: An Experiential Exercise Illustrating Elements of Work Design

Science.gov (United States)

Donovan, Kimberly M.; Fluegge-Woolf, Erin R.

2015-01-01

The Under Construction Exercise was developed by the authors to highlight key factors of work design that when implemented among the work group or entire organization can lead to an environment conducive to fostering satisfaction and motivation. In the exercise, groups are assigned to one of four different conditions that are designed to emulate…

Behaviorism and the Construction of Knowledge

Science.gov (United States)

Faryadi, Qais

2007-01-01

This paper attempts to discuss behaviorism and the construction of knowledge. This review investigates whether behaviorism methodology has any advantages in learning a language in our classroom. This assessment also observes the critics of behaviorism and its weaknesses in a learning environment. This inquiry concentrates on the view point of B.F.…

Study finds declining construction leadtimes for nukes being built

International Nuclear Information System (INIS)

Smock, R.

1983-01-01

A new Electric Power Research Institute (EPRI) study of 26 nuclear projects shows a decrease in the leadtime for nuclear plants under construction in contrast to the findings of other studies. The EPRI study plots construction leadtime against the year of construction permit issuance rather than the year of completion, and it eliminates management delays, physical plant differences, and management differences. The result is a two-part trendline reflecting the discontinuity of regulatory ratchet effects, which cause 50% of construction leadtime delay while labor material delivery problems account for 20% and deliberate delays 22% of leadtime delay. When allowance is made for deliberate delays, there is no growth in construction leadtime. There was no correlation of utility finances, the accuracy of load growth forecasts, or the state regulatory environment to the length of construction. 3 figures,

Repeatability in nest construction by male three-spined sticklebacks

NARCIS (Netherlands)

Rushbrook, B. J.; Dingemanse, N. J.; Barber, I.

Structures built by animals may convey useful information about the builder that may be used by conspecifics in quality assessment. In fish, nest construction has been suggested to reflect qualities of individual builders, but little is known about how consistent individual differences are over

Opportunities and barriers to straw construction

DEFF Research Database (Denmark)

White, Caroline Meyer; Howard, Thomas J.; Lenau, Torben Anker

2012-01-01

During the past decades the building industry has had a great focus on energy consumption during the use phase of a building, but currently a more holistic view of the entire lifecycle of a building is starting to emerge. With this follows a greater interest in which building materials and techni......During the past decades the building industry has had a great focus on energy consumption during the use phase of a building, but currently a more holistic view of the entire lifecycle of a building is starting to emerge. With this follows a greater interest in which building materials...... and techniques of construction are considered. At the same time the request for a living environment free from toxins and allergenic substances, providing the basis for stress-free living and working conditions is increasingly demanded by clients for newly built homes. Since straw built houses supply a possible...... construction, and a series of qualitative interviews with a variety of stakeholders from previous straw build housing projects, results were gathered to find the most influential motives, barriers and considerations for straw build housing construction. Based on this empirical data, a design guide has been...

Research, Development and Application of High Performance Earthquake Resistant Precast System as Green Construction in Indonesia

OpenAIRE

Nurjaman Hari; Hariandja Binsar; Suprapto Gambiro; Faizal Lutfi; Sitepu Haerul

2017-01-01

Sustainable construction is a topic that emerges in the world construction as a response to climate change issue. Building construction stage is a stage in sustainable development. Construction concept that confirm to the concept is referred to as green construction. Precast concrete construction is a construction system that meets green construction criteria, because applies the usage of material and construction method that optimize energy consumption and minimize environment impact during ...

Constructing Liminal Blends in a Collaborative Augmented-Reality Learning Environment

Science.gov (United States)

Enyedy, Noel; Danish, Joshua A.; DeLiema, David

2015-01-01

In vision-based augmented-reality (AR) environments, users view the physical world through a video feed or device that "augments" the display with a graphical or informational overlay. Our goal in this manuscript is to ask "how" and "why" these new technologies create opportunities for learning. We suggest that AR is…

Using game technologies to improve the safety of construction plant operations.

Science.gov (United States)

Guo, Hongling; Li, Heng; Chan, Greg; Skitmore, Martin

2012-09-01

Many accidents occur world-wide in the use of construction plant and equipment, and safety training is considered by many to be one of the best approaches to their prevention. However, current safety training methods/tools are unable to provide trainees with the hands-on practice needed. Game technology-based safety training platforms have the potential to overcome this problem in a virtual environment. One such platform is described in this paper - its characteristics are analysed and its possible contribution to safety training identified. This is developed and tested by means of a case study involving three major pieces of construction plant, which successfully demonstrates that the platform can improve the process and performance of the safety training involved in their operation. This research not only presents a new and useful solution to the safety training of construction operations, but illustrates the potential use of advanced technologies in solving construction industry problems in general. Copyright © 2011 Elsevier Ltd. All rights reserved.

Results of Monitoring at Olkiluoto in 2006. Environment

International Nuclear Information System (INIS)

Haapanen, R.

2007-07-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2006. This is the third annual report. The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground characterization facility. Although some of the nuclear power production related monitoring studies by TVO (the power company) have been going on from the 1970s, the repository-related environmental monitoring of Olkiluoto Island has only recently been comprehensive. Consequently, the first Biosphere Description Report was written in 2006. This work further produced some analyses belonging to the environmental monitoring programme, namely the estimates of biomass in terrestrial vegetation (forests) and a preliminary estimate of the biomass in terrestrial fauna (moose). In the monitoring data, the ongoing construction work (OL3, ONKALO and related infrastructure) is seen for instance in raised noise levels and deposition of base cations and iron. The land-use continues to change, but where there is natural environment, it resembles other coastal locations. The nearby marine environment is affected by the cooling water from the nuclear power plant. (orig.)

42 CFR 403.742 - Condition of participation: Physical environment.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Condition of participation: Physical environment... environment. A RNHCI must be designed, constructed, and maintained to ensure the safety of the patients, staff, and the public. (a) Standard: Buildings. The physical plant and the overall environment must be...

Criteria For Specifikation Of The Indoor Environment Of Active House

DEFF Research Database (Denmark)

Foldbjerg, Peter; Hansen, Ellen Kathrine; Duer, Karsten

2011-01-01

The Active House Alliance has been formed by companies and organisations in the building design, components and construction industry to with the intention to improve the quality of the built environment through a balanced focus on indoor environment, energy and environment – and where the aspects...... of human health and wellbeing will be specifically considered. This paper presents the first version of the Active House specification for indoor environment for residential buildings (where specifications for energy and environment also exist). It is based on the EN 15251 philosophy, and with specific...... requirements to daylight, thermal environment, IAQ and acoustics. Requirements have been tightened compared to EN 15251, and will necessitate performance simulations....

Web-mediated database for internet-based dental radiology teaching files constructed by 5th-year undergraduate students

International Nuclear Information System (INIS)

Kito, Shinji; Wakasugi-Sato, Nao; Matsumoto-Takeda, Shinobu; Oda, Masafumi; Tanaka, Tatsurou; Fukai, Yasuhiro; Tokitsu, Takatoshi; Morimoto, Yasuhiro

2009-01-01

To provide oral healthcare for patients of all ages, dental welfare environments and technical aspects of dentistry have evolved and developed and dental education must also diversify. Student-centered voluntary education and establishment of a life-long self-learning environment are becoming increasingly important in the changing world of dental education. In this article, we introduce a new process for the construction of a web-mediated database containing internet-based teaching files on the normal radiological anatomy of panoramic radiographs and CT images of the oral and maxillofacial regions, as well as a system for the delivery of visual learning materials through an intra-faculty local network. This process was developed by our 5th-year undergraduate students. Animated CT scan images were produced using Macintosh Iphoto and Imovie animation software. Normal anatomical images of panoramic radiographs and CT scans were produced using Adobe Illustrator CS and Adobe Photoshop CS. The web database was constructed using Macromedia Dreamweaver MX and Microsoft Internet Explorer. This project was the basis of our participation in the Student Clinician Research Program (SCRP). At Kyushu Dental College, we developed a new series of teaching files on the web. Uploading these teaching files to the internet allowed many individuals to access the information. Viewers can easily select the area of study that they wish to examine. These processes suggest that our laboratory practice is a useful tool for promoting students' motivation and improving life-long self learning in dental radiology. We expect that many medical and dental students, practitioners and patients will be able to use our teaching files to learn about the normal radiological anatomy of the oral and maxillofacial regions.(author)

Research on Ecological Civilization Construction and Environmental Sustainable Development in the New Era

Science.gov (United States)

Xiang-chao, Pan

2018-05-01

After the 19th National Congress of the Communist Party of China, the Socialism with Chinese Characteristics entered a new era. However, the contradiction between China’s economic and social development and the sustainable development of environment is still outstanding. That is mainly due to the fact that China pays some attention to the economic development but neglects the ecological protection to a certain extent. In the report of the 19th National Congress of the Communist Party of China, it is clearly proposed that it is necessary to adhere to the harmonious coexistence between man and nature, and to establish the concept of green development firmly, focusing on solving the problem of the environmental pollution and destruction and other outstanding issues, and strengthening the construction of the ecological environment supervision system, and the legal guarantee of the construction of ecological civilization. Only by adhering to the concept of ecological civilization in the new era can we finally realize the fundamental improvement of ecological environment.

Barriers to Zero Energy Construction (ZEC); technically possible; why not succeed yet?

NARCIS (Netherlands)

Abdalla, G.; Maas, G.J.; Demers, C.M.H.; Potvin, A

2009-01-01

The construction activities have a significant impact on the environment in terms of energy consumption and use of raw materials. The construction industry has been challenged to meet the human needs in environmentally friendly ways. Environmentally friendly measures and proven renewable energy

Women in the Construction Industry in the U.K.: a Cultural Discord?

Science.gov (United States)

Bagilhole, Barbara M.; Dainty, Andrew R. J.; Neale, Richard H.

The construction industry is the most male dominated of all industrial sectors in the United Kingdom. This article reports on a study that explored women's and men's experiences of working in the industry, focusing on how the cultural aspects of the workplace environment impinged upon women's career development. We interviewed more than 80 male and female construction professionals from large construction organizations, and compared their career accounts in order to establish the aspects of the workplace culture that had a gender-differentiated impact on progression. We found that construction organizations formed competitive "power" cultures where women's contributions were marginalized and their careers impeded through a combination of inflexible work practices and discriminatory behavior. These barriers to women's careers were maintained in small project teams by autonomous male operational managers. Their locus of control embraced recruitment, promotion, and staff development, which allowed them to sustain a workplace culture intolerant of nontraditional entrants. We conclude that this cultural environment is likely to remain problematic for women unless it can be changed in a way that values their contribution. This requires a radical shift in middle management attitudes, a departure from current organizational human resource management systems, and a wider acceptance of the need for cultural change within the industry.

Construction Method of Display Proposal for Commodities in Sales Promotion by Genetic Algorithm

Science.gov (United States)

Yumoto, Masaki

In a sales promotion task, wholesaler prepares and presents the display proposal for commodities in order to negotiate with retailer's buyers what commodities they should sell. For automating the sales promotion tasks, the proposal has to be constructed according to the target retailer's buyer. However, it is difficult to construct the proposal suitable for the target retail store because of too much combination of commodities. This paper proposes a construction method by Genetic algorithm (GA). The proposed method represents initial display proposals for commodities with genes, improve ones with the evaluation value by GA, and rearrange one with the highest evaluation value according to the classification of commodity. Through practical experiment, we can confirm that display proposal by the proposed method is similar with the one constructed by a wholesaler.

A New Cost-Effective Diode Laser Polarimeter Apparatus Constructed by Undergraduate Students

Science.gov (United States)

Lisboa, Pedro; Sotomayor, Joo; Ribeiro, Paulo

2010-01-01

The construction of a diode laser polarimeter apparatus by undergraduate students is described. The construction of the modular apparatus by undergraduate students gives them an insight into how it works and how the measurement of a physical or chemical property is conducted. The students use the polarimeter to obtain rotation angle values for the…

In an Unpredictable and Changing Environment: Intrapreneurial Self-Capital As a Key Resource for Life Satisfaction and Flourishing

OpenAIRE

Annamaria Di Fabio; Letizia Palazzeschi; Ornella Bucci

2017-01-01

The twenty-first century is characterized by an unpredictable and challenging work environment, and the Intrapreneurial Self-Capital (ISC) career and life construct can be seen as a core of individual intrapreneurial resources that enables people to cope with ongoing challenges, changes, and transitions founding innovative solutions when confronted with the constraints imposed by such an environment. The ISC is a challenging construct since it can enhance behavior and attitudes through specif...

Identifying behaviour patterns of construction safety using system archetypes.

Science.gov (United States)

Guo, Brian H W; Yiu, Tak Wing; González, Vicente A

2015-07-01

Construction safety management involves complex issues (e.g., different trades, multi-organizational project structure, constantly changing work environment, and transient workforce). Systems thinking is widely considered as an effective approach to understanding and managing the complexity. This paper aims to better understand dynamic complexity of construction safety management by exploring archetypes of construction safety. To achieve this, this paper adopted the ground theory method (GTM) and 22 interviews were conducted with participants in various positions (government safety inspector, client, health and safety manager, safety consultant, safety auditor, and safety researcher). Eight archetypes were emerged from the collected data: (1) safety regulations, (2) incentive programs, (3) procurement and safety, (4) safety management in small businesses (5) production and safety, (6) workers' conflicting goals, (7) blame on workers, and (8) reactive and proactive learning. These archetypes capture the interactions between a wide range of factors within various hierarchical levels and subsystems. As a free-standing tool, they advance the understanding of dynamic complexity of construction safety management and provide systemic insights into dealing with the complexity. They also can facilitate system dynamics modelling of construction safety process. Copyright © 2015 Elsevier Ltd. All rights reserved.

Design ampersand construction innovations of the defense waste processing facility

International Nuclear Information System (INIS)

McKibben, J.M.; Pair, C.R.; Bethmann, H.K.

1990-01-01

Construction of the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) is essentially complete. The facility is designed to convert high-level radioactive waste, now contained in large steel tanks as aqueous salts and sludge, into solid borosilicate glass in stainless steel canisters. All processing of the radioactive material and operations in a radioactive environment will be done remotely. The stringent requirements dictated by remote operation and new approaches to the glassification process led to the development of a number of first-of-a-kind pieces of equipment, new construction fabrication and erection techniques, and new applications of old techniques. The design features and construction methods used in the vitrification building and its equipment were to accomplish the objective of providing a state-of-the-art vitrification facility. 3 refs., 10 figs

Waste glass as eco-friendly replacement material in construction products

Science.gov (United States)

Sharma, Gayatri; Sharma, Anu

2018-05-01

Atpresent time the biggest issue is increasing urban population, industrialization and development all over the world. The quantity of the raw materials of construction products like cement, concrete etc is gradually depleting. This is important because if we don't find the alternative material to accomplish need of this industry, with every year it will put pressure on natural resources which are limited in quantity. This major issue can be solved by partial replacing with waste glass of different construction products. This paper gives an overview of the current growth and recycling situation of waste glass and point out the direction for the proper use of waste glass as replacement of construction material. These will not only help in the reuse of waste glass but also create eco-friendly environment.

Intelligence, income, and education as potential influences on a child's home environment: A (maternal) sibling-comparison design.

Science.gov (United States)

Hadd, Alexandria Ree; Rodgers, Joseph Lee

2017-07-01

The quality of the home environment, as a predictor, is related to health, education, and emotion outcomes. However, factors influencing the quality of the home environment, as an outcome, have been understudied-particularly how children construct their own environments. Further, most previous research on family processes and outcomes has implemented between-family designs, which limit claims of causality. The present study uses kinship data from the National Longitudinal Survey of Youth to construct a maternal sibling-comparison design to investigate how maternal and child traits predict the quality of home environment. Using a standard between-family analysis, we first replicate previous research showing a relationship between maternal intelligence and the quality of the home environment. Then, we reevaluate the link between maternal intelligence and the home environment using differences between maternal sisters on several characteristics to explain differences between home environments for their children. Following, we evaluate whether child intelligence differences are related to home environment differences in the presence of maternal characteristics. Results are compared with those from the between-family analysis. Past causal interpretations are challenged by our findings, and the role of child intelligence in the construction of the home environment emerges as a critical contributor that increases in importance with development. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Checklist of accessibility in Web informational environments

Directory of Open Access Journals (Sweden)

Christiane Gomes dos Santos

2017-01-01

Full Text Available This research deals with the process of search, navigation and retrieval of information by the person with blindness in web environment, focusing on knowledge of the areas of information recovery and architecture, to understanding the strategies used by these people to access the information on the web. It aims to propose the construction of an accessibility verification instrument, checklist, to be used to analyze the behavior of people with blindness in search actions, navigation and recovery sites and pages. It a research exploratory and descriptive of qualitative nature, with the research methodology, case study - the research to establish a specific study with the simulation of search, navigation and information retrieval using speech synthesis system, NonVisual Desktop Access, in assistive technologies laboratory, to substantiate the construction of the checklist for accessibility verification. It is considered the reliability of performed research and its importance for the evaluation of accessibility in web environment to improve the access of information for people with limited reading in order to be used on websites and pages accessibility check analysis.

Activity measurements of radon from construction materials.

Science.gov (United States)

Fior, L; Nicolosi Corrêa, J; Paschuk, S A; Denyak, V V; Schelin, H R; Soreanu Pecequilo, B R; Kappke, J

2012-07-01

This work presents the results of radon concentration measurements of construction materials used in the Brazilian industry, such as clay (red) bricks and concrete blocks. The measurements focused on the detection of indoor radon activity during different construction stages and the analysis of radionuclides present in the construction materials. For this purpose, sealed chambers with internal dimensions of approximately 60×60×60 cm3 were built within a protected and isolated laboratory environment, and stable air humidity and temperature levels were maintained. These chambers were also used for radon emanation reduction tests. The chambers were built in four major stages: (1) assembly of the walls using clay (red) bricks, concrete blocks, and mortar; (2) installation of plaster; (3) finishing of wall surface using lime; and (4) insulation of wall surface and finishing using paint. Radon measurements were performed using polycarbonate etched track detectors. By comparing the three layers applied to the masonry walls, it was concluded that only the last step (wall painting using acrylic varnish) reduced the radon emanation, by a factor of approximately 2. Samples of the construction materials (clay bricks and concrete blocks) were ground, homogenized, and subjected to gamma-ray spectrometry analysis to evaluate the activity concentrations of 226Ra, 232Th and 40K. The values for the index of the activity concentration (I), radium equivalent activity (Raeq), and external hazard index (Hext) showed that these construction materials could be used without restrictions or concern about the equivalent dose limit (1 mSv/year). Copyright © 2011 Elsevier Ltd. All rights reserved.

THE MODELLING OF ORGANIZATIONAL STRUCTURES OF MANAGEMENT BY REALIZING INVESTMENT CONSTRUCTION PROJECTS

Directory of Open Access Journals (Sweden)

Олег Александрович КУЧМА

2016-03-01

Full Text Available The authors consider the modeling of organizational structures by virtue of interaction between the basic participants by realizing of investment construction projects. This process is directed at the complex analysis of a problem of quality management by creating of building goods taking into account modern project management tendencies. The topicality of problem is obvious as by realizing of investment construction projects there is a liberal share of uncompleted projects, and in the completed projects actual values considerably exceed budgeted capital expenditures. The introduced model allows managing the project per quality system in all phases of the investment construction project‘s life cycle. It promotes refinement of building goods, improves the rate of successfully completed projects with actual values near budgeted.

A Stochastic Model of Plausibility in Live Virtual Constructive Environments

Science.gov (United States)

2017-09-14

from the model parameters that are inputs to the computer model ( mathematical model) but whose exact values are unknown to experimentalists and...Environments Jeremy R. Millar Follow this and additional works at: https://scholar.afit.edu/etd Part of the Computer Sciences Commons This Dissertation...25 3.3 Computing Plausibility Exceedance Probabilities . . . . . . . . . . . . . . . . . . . 28 IV

Occupational Accidents: A Perspective of Pakistan Construction Industry

Directory of Open Access Journals (Sweden)

Tauha Hussain Ali

2014-07-01

Full Text Available It has been observed that the construction industry is one of the notorious industry having higher rate of fatalities and injuries. Resulting in higher financial losses and work hour losses, which are normally faced by this industry due to occuptional accidents. Construction industry has the highest occupational accidents rate recorded throughout the world after agriculture industry. The construction work site is often a busy place having an incredibly high account of activities taking place, where everyone is moving in frenzy having particular task assigned. In such an environment, occupational accidents do occur. This paper gives information about different types of occupational accidents & their causes in the construction industry of Pakistan. A survey has been carried out to identify the types of occupational accidents often occur at construction site. The impact of each occupational accident has also been identified. The input from the different stakeholders involved on the work site was analyzed using RIW (Relative Importance Weight method. The findings of this research show that ?fall from elevation, electrocution from building power and snake bite? are the frequent occupational accidents occur within the work site where as ?fall from elevation, struck by, snake bite and electrocution from faulty tool? are the occupational accident with high impact within the construction industry of Pakistan. The results also shows the final ranking of the accidents based on higher frequency and higher impact. Poor Management, Human Element and Poor Site Condition are found as the root causes leading to such occupational accidents. Hence, this paper

Unit soil loss rate from various construction sites during a storm.

Science.gov (United States)

Maniquiz, Marla C; Lee, Soyoung; Lee, Eunju; Kong, Dong-Soo; Kim, Lee-Hyung

2009-01-01

The Korean Ministry of Environment (MOE) opts to establish an ordinance having a standard specifying an allowable soil loss rate applicable to construction projects. The predicted amount of soil loss from a construction site exceeding the standard can be used to calculate the percent reduction necessary to comply with the ordinance. This research was conducted to provide a basis to establish a standard by investigating the unit soil loss rates in the three phases of development: pre-construction, active construction and post construction based from 1,036 Environmental Impact Assessment (EIA) reports within the six-year period (2000-2005). Based on the findings, several factors affect the magnitude of soil loss rates particularly storm characteristics, site slope, soil type, location from rivers, as well as the type of construction activity. In general, the unit soil loss rates during the active construction phase are extremely higher in comparison to undisturbed areas; in magnitude of 7 to 80 times larger in urban areas and 18 to 585 times in rural areas. Only between 20 to 40 percent of the soil loss rates was contributed at pre- and post- construction phases indicating that the active construction phase is the most important phase to control.

Accuracy Improvement of Real-Time Location Tracking for Construction Workers

Directory of Open Access Journals (Sweden)

Hyunsoo Kim

2018-05-01

Full Text Available Extensive research has been conducted on the real-time locating system (RTLS for tracking construction components, including workers, equipment, and materials, in order to improve construction performance (e.g., productivity improvement or accident prevention. In order to prevent safety accidents and make more sustainable construction job sites, the higher accuracy of RTLS is required. To improve the accuracy of RTLS in construction projects, this paper presents a RTLS using radio frequency identification (RFID. For this goal, this paper develops a location tracking error mitigation algorithm and presents the concept of using assistant tags. The applicability and effectiveness of the developed RTLS are tested under eight different construction environments and the test results confirm the system’s strong potential for improving the accuracy of real-time location tracking in construction projects, thus enhancing construction performance.

Wastewater treatment in tsunami affected areas of Thailand by constructed wetlands

DEFF Research Database (Denmark)

Brix, Hans; Koottatep, H.; Laugesen, C.H.

2007-01-01

the systems which have been built at three locations: (a) Baan Pru Teau: A newly-built township for tsunami victims which was constructed with the contribution of the Thai Red Cross. Conventional septic tanks were installed for the treatment of blackwater from each household and its effluent and grey water...... system and a system for reuse of treated wastewater. The constructed wetland system (capacity 400 m3/day) consists of vertical flow, horizontal subsurface flow, free water surface flow and pond units. Because the treatment plant is surrounded by resorts, restaurants and shops, the constructed wetland...... systems are designed with terrains as scenic landscaping. (c) Patong: A 5,000 m2 constructed wetland system has been established to treat polluted water from drainage canals which collect overflow from septic tanks and grey water from residential areas. It is envisaged that these three systems will serve...

Under niche construction: an operational bridge between ecology, evolution, and ecosystem science

NARCIS (Netherlands)

Matthews, B.; De Meester, L.; Jones, C.G.; Ibelings, B.W.; Bouma, T.J.; Nuutinen, V.; van de Koppel, J.; Odling-Smee, J.

2014-01-01

All living organisms modify their biotic and abiotic environment. Niche construction theory posits that organism-mediated modifications to the environment can change selection pressures and influence the evolutionary trajectories of natural populations. While there is broad support for this

When does it pay to invest in a patch? The evolution of intentional niche construction.

Science.gov (United States)

Mohlenhoff, Kathryn A; Codding, Brian F

2017-09-01

Humans modify their environments in ways that significantly transform the earth's ecosystems. Recent research suggests that such niche-constructing behaviors are not passive human responses to environmental variation, but instead should be seen as active and intentional management of the environment. Although such research is useful in highlighting the interactive dynamics between humans and their natural world, the niche-construction framework, as currently applied, fails to explain why people would decide to modify their environments in the first place. To help resolve this problem, we use a model of technological intensification to analyze the cost-benefit trade-offs associated with niche construction as a form of patch investment. We use this model to assess the costs and benefits of three paradigmatic cases of intentional niche construction in Western North America: the application of fire in acorn groves, the manufacture of fishing weirs, and the adoption of maize agriculture. Intensification models predict that investing in patch modification (niche construction) only provides a net benefit when the amount of resources needed crosses a critical threshold that makes the initial investment worthwhile. From this, it follows that low-cost investments, such as burning in oak groves, should be quite common, while more costly investments, such as maize agriculture, should be less common and depend on the alternatives available in the local environment. We examine how patterns of mobility, risk management, territoriality, and private property also co-evolve with the costs and benefits of niche construction. This approach illustrates that explaining niche-constructing behavior requires understanding the economic trade-offs involved in patch investment. Integrating concepts from niche construction and technological intensification models within a behavioral ecological framework provides insights into the coevolution and active feedback between adaptive behaviors and

Guide for minimizing the effect of preservative-treated wood on sensitive environments

Science.gov (United States)

Stan T. Lebow; Michael Tippie

2001-01-01

Preservative-treated wood is often used for construction of highway and foot bridges, wetland boardwalks, and other structures in or over water or sensitive environments. In these applications it is important that release of preservative from the wood into the environment is minimized. This publication addresses this concern by describing the various types of pressure-...

Experiences and Constructions of Menarche and Menstruation Among Migrant and Refugee Women.

Science.gov (United States)

Hawkey, Alexandra J; Ussher, Jane M; Perz, Janette; Metusela, Christine

2017-08-01

Experiences and constructions of menarche and menstruation are shaped by the sociocultural environment in which women are embedded. We explored experiences and constructions of menarche and menstruation among migrant and refugee women resettled in Sydney, Australia, and Vancouver, Canada. Seventy-eight semistructured individual interviews and 15 focus groups comprised of 82 participants were undertaken with women from Afghanistan, Iraq, Somalia, South Sudan, Sudan, Sri Lanka, and varying South American countries. We analyzed the data using thematic decomposition, identifying the overall theme "cycles of shame" and two core themes. In "becoming a woman," participants constructed menarche as a marker of womanhood, closely linked to marriage and childbearing. In "the unspeakable," women conveyed negative constructions of menstruation, positioning it as shameful, something to be concealed, and polluting. Identifying migrant and refugee women's experiences and constructions of menarche and menstruation is essential for culturally safe medical practice, health promotion, and health education.

Beyond the material grave: Life Cycle Impact Assessment of leaching from secondary materials in road and earth constructions.

Science.gov (United States)

Schwab, Oliver; Bayer, Peter; Juraske, Ronnie; Verones, Francesca; Hellweg, Stefanie

2014-10-01

In industrialized countries, large amounts of mineral wastes are produced. They are re-used in various ways, particularly in road and earth constructions, substituting primary resources such as gravel. However, they may also contain pollutants, such as heavy metals, which may be leached to the groundwater. The toxic impacts of these emissions are so far often neglected within Life Cycle Assessments (LCA) of products or waste treatment services and thus, potentially large environmental impacts are currently missed. This study aims at closing this gap by assessing the ecotoxic impacts of heavy metal leaching from industrial mineral wastes in road and earth constructions. The flows of metals such as Sb, As, Pb, Cd, Cr, Cu, Mo, Ni, V and Zn originating from three typical constructions to the environment are quantified, their fate in the environment is assessed and potential ecotoxic effects evaluated. For our reference country, Germany, the industrial wastes that are applied as Granular Secondary Construction Material (GSCM) carry more than 45,000 t of diverse heavy metals per year. Depending on the material quality and construction type applied, up to 150 t of heavy metals may leach to the environment within the first 100 years after construction. Heavy metal retardation in subsoil can potentially reduce the fate to groundwater by up to 100%. One major challenge of integrating leaching from constructions into macro-scale LCA frameworks is the high variability in micro-scale technical and geographical factors, such as material qualities, construction types and soil types. In our work, we consider a broad range of parameter values in the modeling of leaching and fate. This allows distinguishing between the impacts of various road constructions, as well as sites with different soil properties. The findings of this study promote the quantitative consideration of environmental impacts of long-term leaching in Life Cycle Assessment, complementing site-specific risk

Strategic advantages of high-rise construction

Directory of Open Access Journals (Sweden)

Yaskova Natalya

2018-01-01

Full Text Available Traditional methods to assess the competitiveness of different types of real estate in the context of huge changes of new technological way of life don’t provide building solutions that would be correct from a strategic perspective. There are many challenges due to changes in the consumers’ behavior in the housing area. A multiplicity of life models, a variety of opportunities and priorities, traditions and new trends in construction should be assessed in terms of prospective benefits in the environment of the emerging new world order. At the same time, the mane discourse of high-rise construction mainly relates to its design features, technical innovations, and architectural accents. We need to clarify the criteria for economic evaluation of high-rise construction in order to provide decisions with clear and quantifiable contexts. The suggested approach to assessing the strategic advantage of high-rise construction and the prospects for capitalization of high-rise buildings poses new challenges for the economy to identify adequate quantitative assessment methods of the high-rise buildings economic efficiency, taking into account all stages of their life cycle.

Strategic advantages of high-rise construction

Science.gov (United States)

Yaskova, Natalya

2018-03-01

Traditional methods to assess the competitiveness of different types of real estate in the context of huge changes of new technological way of life don't provide building solutions that would be correct from a strategic perspective. There are many challenges due to changes in the consumers' behavior in the housing area. A multiplicity of life models, a variety of opportunities and priorities, traditions and new trends in construction should be assessed in terms of prospective benefits in the environment of the emerging new world order. At the same time, the mane discourse of high-rise construction mainly relates to its design features, technical innovations, and architectural accents. We need to clarify the criteria for economic evaluation of high-rise construction in order to provide decisions with clear and quantifiable contexts. The suggested approach to assessing the strategic advantage of high-rise construction and the prospects for capitalization of high-rise buildings poses new challenges for the economy to identify adequate quantitative assessment methods of the high-rise buildings economic efficiency, taking into account all stages of their life cycle.

Innovative Materials and Techniques in Concrete Construction : ACES Workshop

CERN Document Server

2012-01-01

Recent years have seen enormous advances in the technology of concrete as a material, through which its strength, compactness and ductility can reach levels never dreamed of before. Thanks to these improved material properties, the strength and durability of concrete structures is greatly improved, their weight and dimensions reduced, the scope of concrete as a structural material is widened and – despite the higher material costs – overall economy is possible, with positive impacts on sustainability as well. Similar advances are underway in reinforcing materials, notably high strength steel and fibre-reinforced polymers, and in the way they are combined with concrete into high performance structures. Developments in materials and equipment, as well as new concepts, have lead to innovative construction techniques, reducing cost and construction time and making possible the application of concrete under extreme conditions of construction or environment. All these advances will be highlighted in the book by...

ANALYSIS OF FUNNELS EVALUATION MODEL BY THE “CONSTRUCTION-SOIL” SYSTEM

Directory of Open Access Journals (Sweden)

A. S. Koretskiy

2010-04-01

Full Text Available Recently in the European countries the designs of flexible pipes and pipe bridges, the bearing capacity of which is provided by passive resistance of soil, have found more applications. The paper presents an analysis of existing models for calculating flexible pipes working as a system «construction-soil». The numerical example for calculating such construction design using software package SCAD is given.

Results of monitoring at Olkiluoto in 2005. Environment

International Nuclear Information System (INIS)

Haapanen, R.

2006-08-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2005. This is the second annual report. Monitoring has been carried out for varying time periods depending on the sector: some monitoring activities performed by TVO originate from the 1970s, others connected with the construction of the final disposal repository for nuclear waste and the underground research facility ONKALO have just started. The system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for environmental impact analyses. In 2005 the deposition collectors and nearby needles caught some dust from the rock piling and crushing activities and traffic. Noise was another clear effect, originating mostly from OL3 construction, rock piling and crushing area and the concrete station. The studies further confirmed that the vegetation, forests, soils and animal life are typical of a coastal region within the same vegetation zone. The nearby marine environment is affected by the cooling water from the nuclear power plant, to varying extents depending on the organism and the distance. Monitoring of marine environments as well as radionuclide analyses at the moment produce reference data for the future and create a basis for the construction of a model, as no input from Posiva's activities will influence these areas for a long time. (orig.)

Altered amygdalar resting-state connectivity in depression is explained by both genes and environment.

Science.gov (United States)

Córdova-Palomera, Aldo; Tornador, Cristian; Falcón, Carles; Bargalló, Nuria; Nenadic, Igor; Deco, Gustavo; Fañanás, Lourdes

2015-10-01

Recent findings indicate that alterations of the amygdalar resting-state fMRI connectivity play an important role in the etiology of depression. While both depression and resting-state brain activity are shaped by genes and environment, the relative contribution of genetic and environmental factors mediating the relationship between amygdalar resting-state connectivity and depression remain largely unexplored. Likewise, novel neuroimaging research indicates that different mathematical representations of resting-state fMRI activity patterns are able to embed distinct information relevant to brain health and disease. The present study analyzed the influence of genes and environment on amygdalar resting-state fMRI connectivity, in relation to depression risk. High-resolution resting-state fMRI scans were analyzed to estimate functional connectivity patterns in a sample of 48 twins (24 monozygotic pairs) informative for depressive psychopathology (6 concordant, 8 discordant and 10 healthy control pairs). A graph-theoretical framework was employed to construct brain networks using two methods: (i) the conventional approach of filtered BOLD fMRI time-series and (ii) analytic components of this fMRI activity. Results using both methods indicate that depression risk is increased by environmental factors altering amygdalar connectivity. When analyzing the analytic components of the BOLD fMRI time-series, genetic factors altering the amygdala neural activity at rest show an important contribution to depression risk. Overall, these findings show that both genes and environment modify different patterns the amygdala resting-state connectivity to increase depression risk. The genetic relationship between amygdalar connectivity and depression may be better elicited by examining analytic components of the brain resting-state BOLD fMRI signals. © 2015 Wiley Periodicals, Inc.

Human Machine Interaction by Simulation of Dynamics of Construction Machinery

DEFF Research Database (Denmark)

Langer, Thomas Heegaard

-body vibration exposure was more than 20 percent and at the same time the fuel consumption was reduced significant. Training of operators is hence beneficial for both employees and employers of the construction industry. The whole-body vibration exposure on operators of dump trucks are dominated by off-road......This industrial Ph.D. project concerns whole-body vibrations in human operated construction machinery. The emissions of these vibrations is closely related to the subjective experience of comfort and in some cases these vibrations can occur in a level which can cause the operator back disorders...

Maintaining Indoor Environmental Quality (IEQ) during Construction and Renovation

Science.gov (United States)

... Safety Construction Safety and Health Emergency Preparedness for Business Occupational Respiratory Disease Surveillance (ORDS) Office Environment Storm and Flood Cleanup Tuberculosis Follow NIOSH Facebook Flickr Pinterest Twitter YouTube NIOSH Homepage NIOSH A- ...

Virtual environments for scene of crime reconstruction and analysis

Science.gov (United States)

Howard, Toby L. J.; Murta, Alan D.; Gibson, Simon

2000-02-01

This paper describes research conducted in collaboration with Greater Manchester Police (UK), to evalute the utility of Virtual Environments for scene of crime analysis, forensic investigation, and law enforcement briefing and training. We present an illustrated case study of the construction of a high-fidelity virtual environment, intended to match a particular real-life crime scene as closely as possible. We describe and evaluate the combination of several approaches including: the use of the Manchester Scene Description Language for constructing complex geometrical models; the application of a radiosity rendering algorithm with several novel features based on human perceptual consideration; texture extraction from forensic photography; and experiments with interactive walkthroughs and large-screen stereoscopic display of the virtual environment implemented using the MAVERIK system. We also discuss the potential applications of Virtual Environment techniques in the Law Enforcement and Forensic communities.

Characterization of the Hanford Site and environs

Energy Technology Data Exchange (ETDEWEB)

Cushing, C.E. (ed.)

1991-03-01

The US Department of Energy (DOE) proposes to site, construct, and operate a new production reactor (NPR) intended to produce materials for the US nuclear weapons program. The DOE has determined that this proposed action constitutes an action that may significantly affect the quality of the human environment; therefore, the DOE is preparing an environmental impact statement (EIS) to assess the potential impacts of the proposed action and reasonable alternatives on the human and natural environment. The NPR-EIS is being prepared in accordance with Section 102(2)(C) of the National Environmental Policy Act of 1969 (NEPA), as implemented in regulations (40 CFR 1500--1508) promulgated by the Council on Environmental Quality (CEQ). Information on the potentially affected environment at the Hanford Site and its environs was provided to ANL by PNL in various submissions during CY-1989, and some of that information was consolidated into this report, which is considered to be supporting documentation for the NPR-EIS. 93 refs., 35 figs., 46 tabs.

Unit Price and Cost Estimation Equations through Items Percentage of Construction Works in a Desert Area

Directory of Open Access Journals (Sweden)

Kadhim Raheem

2015-02-01

Full Text Available This research will cover different aspects of estimating process of construction work in a desert area. The inherent difficulties which accompany the cost estimating of the construction works in desert environment in a developing country, will stem from the limited information available, resources scarcity, low level of skilled workers, the prevailing severe weather conditions and many others, which definitely don't provide a fair, reliable and accurate estimation. This study tries to present unit price to estimate the cost in preliminary phase of a project. Estimations are supported by developing mathematical equations based on the historical data of maintenance, new construction of managerial and school projects. Meanwhile, the research has determined the percentage of project items, in such a remote environment. Estimation equations suitable for remote areas have been formulated. Moreover, a procedure for unite price calculation is concluded.

Statistical Study of Corrosion Types in Constructions in South Region of Rio De Janeiro – Brazil

Directory of Open Access Journals (Sweden)

Carolina Lacerda da Cruz

2016-05-01

Full Text Available Some of the most difficult and troubling problems encountered in construction are those caused by corrosive processes. The corrosion processes are constituted by some material degradation, generally metallic material, by means of chemical or electrochemical actions of environment in which the material are and can or cannot be combined with mechanical stress. Corrosion is present in the materials in general. Their deterioration is caused by such physical-chemical interaction between the material and the corrosive environment where it causes major problems in several activities. In order to prevent material losses, anticorrosive techniques are used which include coatings, medium modification techniques, anodic and cathodic protection, and corrosion inhibitors such as the organic compounds use. This article analyses the statistical study of corrosion types in construction in south region of Rio de Janeiro, Brazil.

Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers

International Nuclear Information System (INIS)

Levato, Riccardo; Planell, Josep A; Engel, Elisabeth; Visser, Jetze; Malda, Jos; Mateos-Timoneda, Miguel A

2014-01-01

Bioprinting allows the fabrication of living constructs with custom-made architectures by spatially controlled deposition of multiple bioinks. This is important for the generation of tissue, such as osteochondral tissue, which displays a zonal composition in the cartilage domain supported by the underlying subchondral bone. Challenges in fabricating functional grafts of clinically relevant size include the incorporation of cues to guide specific cell differentiation and the generation of sufficient cells, which is hard to obtain with conventional cell culture techniques. A novel strategy to address these demands is to combine bioprinting with microcarrier technology. This technology allows for the extensive expansion of cells, while they form multi-cellular aggregates, and their phenotype can be controlled. In this work, living constructs were fabricated via bioprinting of cell-laden microcarriers. Mesenchymal stromal cell (MSC)-laden polylactic acid microcarriers, obtained via static culture or spinner flask expansion, were encapsulated in gelatin methacrylamide-gellan gum bioinks, and the printability of the composite material was studied. This bioprinting approach allowed for the fabrication of constructs with high cell concentration and viability. Microcarrier encapsulation improved the compressive modulus of the hydrogel constructs, facilitated cell adhesion, and supported osteogenic differentiation and bone matrix deposition by MSCs. Bilayered osteochondral models were fabricated using microcarrier-laden bioink for the bone compartment. These findings underscore the potential of this new microcarrier-based biofabrication approach for bone and osteochondral constructs. (paper)

Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers.

Science.gov (United States)

Levato, Riccardo; Visser, Jetze; Planell, Josep A; Engel, Elisabeth; Malda, Jos; Mateos-Timoneda, Miguel A

2014-09-01

Bioprinting allows the fabrication of living constructs with custom-made architectures by spatially controlled deposition of multiple bioinks. This is important for the generation of tissue, such as osteochondral tissue, which displays a zonal composition in the cartilage domain supported by the underlying subchondral bone. Challenges in fabricating functional grafts of clinically relevant size include the incorporation of cues to guide specific cell differentiation and the generation of sufficient cells, which is hard to obtain with conventional cell culture techniques. A novel strategy to address these demands is to combine bioprinting with microcarrier technology. This technology allows for the extensive expansion of cells, while they form multi-cellular aggregates, and their phenotype can be controlled. In this work, living constructs were fabricated via bioprinting of cell-laden microcarriers. Mesenchymal stromal cell (MSC)-laden polylactic acid microcarriers, obtained via static culture or spinner flask expansion, were encapsulated in gelatin methacrylamide-gellan gum bioinks, and the printability of the composite material was studied. This bioprinting approach allowed for the fabrication of constructs with high cell concentration and viability. Microcarrier encapsulation improved the compressive modulus of the hydrogel constructs, facilitated cell adhesion, and supported osteogenic differentiation and bone matrix deposition by MSCs. Bilayered osteochondral models were fabricated using microcarrier-laden bioink for the bone compartment. These findings underscore the potential of this new microcarrier-based biofabrication approach for bone and osteochondral constructs.

Research highlights in energy and eco-efficient built environment

Energy Technology Data Exchange (ETDEWEB)

Airaksinen, M. (ed.)

2012-06-15

This publication presents a compilation of VTT's recent research on energy and eco-efficient built environment. Sustainability as a dominating driver of technology development can also be seen in the R and D portfolio of VTT Technical Research Centre of Finland. A clear focus of our research for the building sector is sustainable construction, particularly the energy efficiency of the built environment. Buildings and the whole built environment are in a key role when societies are mitigating climate change and adapting to its consequences. Despite the temporary economic downturn, construction globally remains one of the most significant areas of human activities globally. Due to the urgency of measures related to climate change and the need to provide a proper environment for living and working, a large number of national and international measures have been agreed to guarantee the future development of sustainable built environment for all. Indirectly, this has lead to a need to develop existing and completely new technologies and processes for the built environment with a speed faster than ever and with a more holistic performance metrics than ever.

Influences on Women’s Choices of Careers in Construction: A South African Study

Directory of Open Access Journals (Sweden)

Kolosa Madikizela

2010-06-01

Full Text Available  This paper analyses the factors influencing the choices of careers in construction by South African women. The literature on challenges which influence women‟s choices of careers in construction was reviewed and questionnaires were conducted with multiple samples, including construction organisations, construction students and professional women working in construction. The study found that women have a role to play in the construction industry and that they can build successful careers within the sector. However, it was not easy given the various barriers to entry such as gender-based discrimination against them, the harsh work environment of the construction site, the lack of sufficient knowledge about the industry itself and the shortage of successful women in construction as role models. There was evidence of discrimination and sexual harassment. All these factors impacted negatively on the choices of careers in construction by South African women. This study makes a contribution to our understanding of the factors that have marginalised women in a male dominated industry and provides some indication of approaches to attract more women into the sector. It is hoped that it will stimulate debate about how the low representation of women in construction can be addressed and how construction careers for women can be promoted and encouraged and that the resource pool will be enlarged given the prevalent acute skills shortage in the industry.  

Influences on Women’s Choices of Careers in Construction: A South African Study

Directory of Open Access Journals (Sweden)

Theo Haupt

2010-07-01

Full Text Available  This paper analyses the factors influencing the choices of careers in construction by South African women. The literature on challenges which influence women‟s choices of careers in construction was reviewed and questionnaires were conducted with multiple samples, including construction organisations, construction students and professional women working in construction. The study found that women have a role to play in the construction industry and that they can build successful careers within the sector. However, it was not easy given the various barriers to entry such as gender-based discrimination against them, the harsh work environment of the construction site, the lack of sufficient knowledge about the industry itself and the shortage of successful women in construction as role models. There was evidence of discrimination and sexual harassment. All these factors impacted negatively on the choices of careers in construction by South African women. This study makes a contribution to our understanding of the factors that have marginalised women in a male dominated industry and provides some indication of approaches to attract more women into the sector. It is hoped that it will stimulate debate about how the low representation of women in construction can be addressed and how construction careers for women can be promoted and encouraged and that the resource pool will be enlarged given the prevalent acute skills shortage in the industry.

Influences on Women’s Choices of Careers in Construction: A South African Study

Directory of Open Access Journals (Sweden)

Kolosa Madikizela

2010-06-01

Full Text Available This paper analyses the factors influencing the choices of careers in construction by South African women. The literature on challenges which influence women‟s choices of careers in construction was reviewed and questionnaires were conducted with multiple samples, including construction organisations, construction students and professional women working in construction. The study found that women have a role to play in the construction industry and that they can build successful careers within the sector. However, it was not easy given the various barriers to entry such as gender-based discrimination against them, the harsh work environment of the construction site, the lack of sufficient knowledge about the industry itself and the shortage of successful women in construction as role models. There was evidence of discrimination and sexual harassment. All these factors impacted negatively on the choices of careers in construction by South African women. This study makes a contribution to our understanding of the factors that have marginalised women in a male dominated industry and provides some indication of approaches to attract more women into the sector. It is hoped that it will stimulate debate about how the low representation of women in construction can be addressed and how construction careers for women can be promoted and encouraged and that the resource pool will be enlarged given the prevalent acute skills shortage in the industry.

Assessing and controlling risks from the emission of organic chemicals from construction products into indoor environments.

Science.gov (United States)

Brown, Veronica M; Crump, Derrick R; Harrison, Paul T C

2013-12-01

Construction products can be a significant source of indoor pollutants, including volatile organic compounds that may be a risk to the health and well-being of building occupants. There are currently a number of schemes for the labelling of products according to their potential to emit organic compounds. Assessment of the complex mixtures of compounds that may be released has mandated the development of test methods that allow the determination of the concentrations of the chemicals released from products in controlled test chamber environments. In response to concerns about the financial burden faced by manufacturers required to test products according to the various different labelling schemes currently in existence, the European Commission has investigated the scope for greater harmonisation. This initiative has sought to harmonise the process for the assessment of emissions data, complementing work led by the European standards organisation focussed on harmonising the test chamber procedures. The current labelling schemes have a range of requirements with respect to the number of chemicals to be quantified. A comparison of 13 schemes worldwide has identified 15 lists of target compounds, with a total of 611 chemicals occurring on at least one of the target lists. While harmonisation may clarify and perhaps simplify these requirements, at least in Europe, it can be expected that future changes to product formulations, the introduction of new products and our increasing knowledge about the potential risks to health, will require continued development of new and improved measurement techniques. There is, therefore, a particular challenge for analytical chemists to ensure the efficient provision of high quality emissions data and thereby ultimately enable effective control of risks to human health through the prevention or reduction of indoor air pollution.

Design and construction of the CDF central tracking chamber

International Nuclear Information System (INIS)

Bedeschi, F.; Berge, J.P.; Bofill, J.; Dell'Orso, M.; Foster, G.W.; Hrycyk, M.; Kadel, R.W.; Kowalski, J.; Mukherjee, A.; Newman-Holmes, C.; O'Meara, J.; Patrick, J.; Tinsley, D.; Wagner, R.L.; Yarema, R.; Byon, A.

1988-01-01

We describe the design and construction of a large drift chamber of a novel design well adapted for operation in high magnetic fields and in the high track density environment of hadron colliders. (orig.)

Digging into construction: social networks and their potential impact on knowledge transfer.

Science.gov (United States)

Carlan, N A; Kramer, D M; Bigelow, P; Wells, R; Garritano, E; Vi, P

2012-01-01

A six-year study is exploring the most effective ways to disseminate ideas to reduce musculoskeletal disorders (MSDs) in the construction sector. The sector was targeted because MSDs account for 35% of all lost time injuries. This paper reports on the organization of the construction sector, and maps potential pathways of communication, including social networks, to set the stage for future dissemination. The managers, health and safety specialists, union health and safety representatives, and 28 workers from small, medium and large construction companies participated. Over a three-year period, data were collected from 47 qualitative interviews. Questions were guided by the PARIHS (Promoting Action on Research Implementation in Health Services) knowledge-transfer conceptual framework and adapted for the construction sector. The construction sector is a complex and dynamic sector, with non-linear reporting relationships, and divided and diluted responsibilities. Four networks were identified that can potentially facilitate the dissemination of new knowledge: worksite-project networks; union networks; apprenticeship program networks; and networks established by the Construction Safety Association/Infrastructure Health and Safety Association. Flexible and multi-directional lines of communication must be used in this complex environment. This has implications for the future choice of knowledge transfer strategies.

Study on modular construction management in AP1000 nuclear plant project

International Nuclear Information System (INIS)

Fang Xiaopeng; Shen Wenrong; Sun Kebin; Wei Zhong

2010-01-01

The construction of AP1000 Nuclear Power Plant (NPP) has commenced in China. The AP1000 NPP features a passive design concept and modular construction technology. Based on the management of the construction of current AP1000 NNP, this paper describes the effects on Nuclear Island (NI) construction project management resulting from modular construction technology, as well as new construction techniques and methods. This paper puts forward new requirements for construction schedule management of the nuclear island construction at different levels. The AP1000 NI construction logic features the parallel construction of civil and structural erection as the main approach, with the integrated schedule of module fabrication, assembly and installation as support. The structural modules of AP1000 project are prefabricated in shop, delivered to site as sub-modules and assembled to integrated structural module. The assembled module is transported to the construction site, hoisted and finally set in NI. This paper illustrates how to ensure the construction quality of structural modules by analyzing the interface process and key links in the quality control program, and introduces how to ensure the safety of heavy structural components during various construction phases by evaluating and analyzing the construction safety process. This paper also makes an analysis of the safe environment for the assembly and installation of Containment Vessel, the management of product protection and personnel safety inside the Containment Building during 'Open Top' construction, raises to implement effective protection for the numerous pre-set mechanical modules and equipments, as well as personnel safety protection programs and measures. The modular construction feature of AP1000 NPP design requires technique improvement and management innovation during the NI construction. This paper makes a study and research on the control management of schedule, quality and safety of AP1000 NPP NI

Incorporating civil-defense shelter space in new underground construction

International Nuclear Information System (INIS)

Chester, C.V.

1981-01-01

At the present time, the population of the US is approximately ten times more vulnerable to nuclear weapons than the Soviet population. This vulnerability can be reduced rapidly by urban evacuation in a crisis. However, the need to keep the essential economy running in a crisis, as well as coping with attacks on short warning, makes the construction of shelter space where people live very desirable. This can be done most economically by slightly modifying underground construction intended for peacetime use. The designer must consider all elements of the emergency environment when designing the space. Provisions must be made for emergency egress, light and ventilation (without elecric power), blast closures, water, sanitation, and food. The option of upgrading the space in a crisis should be considered. An example is given

[Regional ecological planning and ecological network construction: a case study of "Ji Triangle" Region].

Science.gov (United States)

Li, Bo; Han, Zeng-Lin; Tong, Lian-Jun

2009-05-01

By the methods of in situ investigation and regional ecological planning, the present ecological environment, ecosystem vulnerability, and ecological environment sensitivity in "Ji Triangle" Region were analyzed, and the ecological network of the study area was constructed. According to the ecological resources abundance degree, ecological recovery, farmland windbreak system, environmental carrying capacity, forestry foundation, and ecosystem integrity, the study area was classified into three regional ecological function ecosystems, i. e., east low hill ecosystem, middle plain ecosystem, and west plain wetland ecosystem. On the basis of marking regional ecological nodes, the regional ecological corridor (Haerbin-Dalian regional axis, Changchun-Jilin, Changchun-Songyuan, Jilin-Songyuan, Jilin-Siping, and Songyuan-Siping transportation corridor) and regional ecological network (one ring, three links, and three belts) were constructed. Taking the requests of regional ecological security into consideration, the ecological environment security system of "Ji Triangle" Region, including regional ecological conservation district, regional ecological restored district, and regional ecological management district, was built.

Blasting Impact by the Construction of an Underground Research Tunnel in KAERI

International Nuclear Information System (INIS)

Kwon, S.; Cho, W. J.

2005-12-01

The underground research tunnel, which is under construction in KAERI for the validation of HLW disposal system, is excavated by drill and blasting method using high-explosives. In order not to disturb the operation at the research facilities such as HANARO reactor, it is critical to develop a blasting design , which will not influence on the facilities, even though several tens of explosives are detonated almost simultaneously. To develop a reasonable blasting design, a test blasting at the site should be performed. A preliminary analysis for predicting the expected vibration and noise by the blasting for the construction of the underground research tunnel was performed using a typical empirical equation. From the study, a blasting design could be developed not to influence on the major research facilities in KAERI. For the validation of the blasting design, a test blasting was carried out at the site and the parameters of vibration equation could be determined using the measured data during the test blasting. Using the equation, it was possible to predict the vibration at different locations at KAERI and to conclude that the blasting design would meet the design criteria at the major facilities in KAERI. The study would verify the applicability of blasting method for the construction of a research tunnel in a rock mass and that would help the design and construction of large scale underground research laboratory, which might be carried out in the future. It is also meaningful to accumulate technical experience for enhancing the reliability and effectiveness of the design and construction of the HLW disposal repository, which will be constructed in deep underground by drill and blasting technique

Occupational accidents: a perspective of pakistan construction industry

International Nuclear Information System (INIS)

Ali, T.H.; Khahro, S.H.; Memon, F.A.

2014-01-01

It has been observed that the construction industry is one of the notorious industry having higher rate of facilities and injuries. Resulting in higher financial losses and work hour losses, which are normally faced by this industry due to occupational accidents. Construction industry has the highest occupational accidents rate recorded throughout the world after agriculture industry. The construction work site is often a busy place having an incredibly high account of activities taking place, where everyone is moving in frenzy having particular task assigned. In such an environment, occupational accidents do occur. This paper gives information about different types of occupational accidents and their causes in the construction industry of Pakistan. A survey has been carried out to identify the types of occupational accidents often occur at construction site. The impact of each occupational accident has also been identified. The input from the different stakeholders involved on the work site was analyzed using RIW (Relative Importance Weight) method. The findings of this research show that fall from elevation, electrocution from building power and snake bite are the frequent occupational accidents occur within the work site where as fall from elevation, struck by, snake bite and electrocution from faulty tool are the occupational accident with high impact within the construction industry of Pakistan. The results also shows the final ranking of the accidents based on higher frequency and higher impact. Poor Management, Human Element and Poor Site Condition are found as the root causes leading to such occupational accidents. Hence, this paper identify that what type of occupational accidents occur at the work place in construction industry of pakistan, in order to develop the corrective actions which should be adequate enough to prevent the re-occurrence of such accidents at work site. (author)

Generation IV Nuclear Energy Systems Construction Cost Reductions through the use of Virtual Environments: Task 1 Completion Report

International Nuclear Information System (INIS)

Whisker, V.E.; Baratta, A.J.; Shaw, T.S.; Winters, J.W.; Trikouros, N.; Hess, C.

2002-01-01

OAK B204 The objective of this project is to demonstrate the feasibility and effectiveness of using full-scale virtual reality simulation in the design, construction, and maintenance of future nuclear power plants. Specifically, this project will test the suitability of Immersive Projection Display (IPD) technology to aid engineers in the design of the next generation nuclear power plant and to evaluate potential cost reductions that can be realized by optimization of installation and construction sequences. The intent is to see if this type of information technology can be used in capacities similar to those currently filled by full-scale physical mockups

Generation IV Nuclear Energy Systems Construction Cost Reductions through the use of Virtual Environments: Task 1 Completion Report

Energy Technology Data Exchange (ETDEWEB)

Whisker, V.E.; Baratta, A.J.; Shaw, T.S.; Winters, J.W.; Trikouros, N.; Hess, C.

2002-11-26

OAK B204 The objective of this project is to demonstrate the feasibility and effectiveness of using full-scale virtual reality simulation in the design, construction, and maintenance of future nuclear power plants. Specifically, this project will test the suitability of Immersive Projection Display (IPD) technology to aid engineers in the design of the next generation nuclear power plant and to evaluate potential cost reductions that can be realized by optimization of installation and construction sequences. The intent is to see if this type of information technology can be used in capacities similar to those currently filled by full-scale physical mockups.

Safety Leadership Defined within the Australian Construction Industry

OpenAIRE

Daniel, Luke

2015-01-01

This research explores the tenets of safety leadership within the Australian construction environment. The scope of this research aims to establish a universal definition of safety leadership and how it differs from other leadership disciplines. The literature review into this topic was governed by the parent disciplines of Safety and Leadership.  Gaps were identified in the literature that indicated safety leadership is not a well-defined concept and much of the work into safety leadership h...

Alternatives to Conventional Construction Materials on Landfills. A Guide; Alternativa konstruktionsmaterial paa deponier. Vaegledning

Energy Technology Data Exchange (ETDEWEB)

Rihm, Thomas; Rogbeck, Yvonne; Svedberg, Bo; Eriksson, Maria

2009-03-15

Before a landfill can be sited, an application for a permit from the authorities is required. Already in the application process the consequences concerning impact on human health and on the environment must be described, including descriptions of e.g. bottom liners and capping constructions. Since there is a long period of time between when the permit is given and when the capping will be carried out, it is common practice, either to postpone decisions concerning capping details, or to delegate the decisions to the supervisory authorities to be made at a later stage. All constructions must however be approved by the authorities before they can be carried out. A construction must fulfil the demands for its function. For the capping this means that the percolation through it must be low, even in a long time perspective. A construction may not in itself cause adverse environmental effects, e.g. leaching of hazardous substances from the construction material. Thus, there are functional as well as environmental demands. Beside the functional demands given in the Swedish legislation, notably in the ordinance on landfilling, the construction must be physically stable, also in a long time perspective. The materials in the construction must have sufficient strength, and may not change over time, e.g. due to degradation, which could lead to malfunction. Demands on environmental behaviour can be divided into two parts. Humans and animals must be kept from direct contact with dangerous substances including dermal contact, inhalation of dust or gases and oral intake of soil, plants or berries. Secondly, dangerous substances may not be spread with surface or ground water to an extent that could lead to adverse effects on human health or on the environment. The impact on the environment is not only depending of the materials being used, but also on the construction design, where in the landfill the construction is situated and, not least, how the landfill is located. It is

Regional approaches in high-rise construction

Science.gov (United States)

Iconopisceva, O. G.; Proskurin, G. A.

2018-03-01

The evolutionary process of high-rise construction is in the article focus. The aim of the study was to create a retrospective matrix reflecting the tasks of the study such as: structuring the most iconic high-rise objects within historic boundaries. The study is based on contemporary experience of high-rise construction in different countries. The main directions and regional specifics in the field of high-rise construction as well as factors influencing the further evolution process are analyzed. The main changes in architectural stylistics, form-building, constructive solutions that focus on the principles of energy efficiency and bio positivity of "sustainable buildings", as well as the search for a new typology are noted. The most universal constructive methods and solutions that turned out to be particularly popular are generalized. The new typology of high-rises and individual approach to urban context are noted. The results of the study as a graphical scheme made it possible to represent the whole high-rise evolution. The new spatial forms of high-rises lead them to new role within the urban environments. Futuristic hyperscalable concepts take the autonomous urban space functions itself and demonstrate us how high-rises can replace multifunctional urban fabric, developing it inside their shells.

Construction Managers’ Perception of the Factors Affecting Sustainability in Construction Projects

OpenAIRE

Reza Taheriattar; Morvarid Farzanehrafat

2014-01-01

Sustainable construction is a comprehensive concept which requires long-term planning. Moreover, construction managers play a key role in leading, planning and scheduling of a construction project. As a result, sustainability of construction projects can be affected by construction managers’ decisions. In addition, for greater development of sustainable construction, affecting factors should firstly be notified. Therefore, it seems necessary to investigate construction managers’ perception of...

Learning Object Metadata in a Web-Based Learning Environment

NARCIS (Netherlands)

Avgeriou, Paris; Koutoumanos, Anastasios; Retalis, Symeon; Papaspyrou, Nikolaos

2000-01-01

The plethora and variance of learning resources embedded in modern web-based learning environments require a mechanism to enable their structured administration. This goal can be achieved by defining metadata on them and constructing a system that manages the metadata in the context of the learning

Barriers of lean construction implementation in the Moroccan construction industry

Science.gov (United States)

Bajjou, Mohamed Saad; Chafi, Anas

2018-04-01

Improving the production system performance has become a fundamental pillar that must be taken into consideration in the construction industry. Recent developments in the construction sector have led to renewed interest in new techniques of management. Lean Construction is a very effective approach that has gained a high popularity by its ability to eliminate waste and maximize the value for the customer. Although both developed and developing countries have gained large benefits by implementing Lean Construction approach, several experiences showed many barriers that are hindering its implementation especially in developing countries. This paper aims to assess the critical barriers to the successful implementation in the Moroccan construction industry. Based on a literature review, followed by an analysis of data collected from a questionnaire survey which targeted 330 practitioners in the Moroccan construction field, several barriers were identified as key barriers. The findings of this investigation revealed that there are significant barriers such as Lack of knowledge about Lean Construction concepts, Unskilled Human Resources, and insufficient financial resources.

The Learner’s learning evironment: three drivers that impact on its construction and use

OpenAIRE

Ellis, Ainslie Elizabeth

2017-01-01

With universities adopting a learner-centered, constructivist approach to learning and greater use of technology, combined with the pressures of 21st century living and the increasing number of people taking up tertiary study, there is a greater need than ever to determine how a learner constructs and uses his/her learning environment, and what drives that process of construction and use. This thesis investigates the learner’s learning environment from the learner’s perspective. Through the a...

Development and evaluation of a food environment survey in three urban environments of Kunming, China

Science.gov (United States)

2014-01-01

Background Given the rapid pace of urbanization and Westernization and the increasing prevalence of obesity, there is a need for research to better understand the influence of the built environment on overweight and obesity in world’s developing regions. Culturally-specific food environment survey instruments are important tools for studying changing food availability and pricing. Here, we present findings from an effort to develop and evaluate food environment survey instruments for use in a rapidly developing city in southwest China. Methods We developed two survey instruments (for stores and restaurants), each designed to be completed within 10 minutes. Two pairs of researchers surveyed a pre-selected 1-km stretch of street in each of three socio-demographically different neighborhoods to assess inter-rater reliability. Construct validity was assessed by comparing the food environments of the neighborhoods to cross-sectional height and weight data obtained on 575 adolescents in the corresponding regions of the city. Results 273 food establishments (163 restaurants and 110 stores) were surveyed. Sit-down, take-out, and fast food restaurants accounted for 40%, 21% and 19% of all restaurants surveyed. Tobacco and alcohol shops, convenience stores and supermarkets accounted for 25%, 12% and 11%, respectively, of all stores surveyed. We found a high percentage of agreement between teams (>75%) for all categorical variables with moderate kappa scores (0.4-0.6), and no statistically significant differences between teams for any of the continuous variables. More developed inner city neighborhoods had a higher number of fast food restaurants and convenience stores than surrounding neighborhoods. Adolescents who lived in the more developed inner neighborhoods also had a higher percentage of overweight, indicating well-founded construct validity. Depending on the cutoff used, 19% to 36% of male and 10% to 22% of female 16-year old adolescents were found to be overweight

Development and evaluation of a food environment survey in three urban environments of Kunming, China.

Science.gov (United States)

Hua, Jenna; Seto, Edmund; Li, Yan; Wang, May C

2014-03-06

Given the rapid pace of urbanization and Westernization and the increasing prevalence of obesity, there is a need for research to better understand the influence of the built environment on overweight and obesity in world's developing regions. Culturally-specific food environment survey instruments are important tools for studying changing food availability and pricing. Here, we present findings from an effort to develop and evaluate food environment survey instruments for use in a rapidly developing city in southwest China. We developed two survey instruments (for stores and restaurants), each designed to be completed within 10 minutes. Two pairs of researchers surveyed a pre-selected 1-km stretch of street in each of three socio-demographically different neighborhoods to assess inter-rater reliability. Construct validity was assessed by comparing the food environments of the neighborhoods to cross-sectional height and weight data obtained on 575 adolescents in the corresponding regions of the city. 273 food establishments (163 restaurants and 110 stores) were surveyed. Sit-down, take-out, and fast food restaurants accounted for 40%, 21% and 19% of all restaurants surveyed. Tobacco and alcohol shops, convenience stores and supermarkets accounted for 25%, 12% and 11%, respectively, of all stores surveyed. We found a high percentage of agreement between teams (>75%) for all categorical variables with moderate kappa scores (0.4-0.6), and no statistically significant differences between teams for any of the continuous variables. More developed inner city neighborhoods had a higher number of fast food restaurants and convenience stores than surrounding neighborhoods. Adolescents who lived in the more developed inner neighborhoods also had a higher percentage of overweight, indicating well-founded construct validity. Depending on the cutoff used, 19% to 36% of male and 10% to 22% of female 16-year old adolescents were found to be overweight. The prevalence of

Physiological environment induce quick response - slow exhaustion reactions

Directory of Open Access Journals (Sweden)

Noriko eHiroi

2011-09-01

Full Text Available In vivo environments are highly crowded and inhomogeneous, which may affect reaction processes in cells. In this study we examined the effects of intracellular crowding and an inhomogeneity on the behavior of in vivo reactions by calculating the spectral dimension (ds, which can be translated into the reaction rate function. We compared estimates of anomaly parameters obtained from Fluorescence Correlation Spectroscopy (FCS data with fractal dimensions derived from Transmission Electron Microscopy (TEM image analysis. FCS analysis indicated that the anomalous property was linked to physiological structure. Subsequent TEM analysis provided an in vivo illustration; soluble molecules likely percolate between intracellular clusters, which are constructed in a self-organizing manner. We estimated a cytoplasmic spectral dimension ds to be 1.39 ± 0.084. This result suggests that in vivo reactions initially run faster than the same reactions in a homogeneous space; this conclusion is consistent with the anomalous character indicated by FCS analysis. We further showed that these results were compatible with our Monte-Carlo simulation in which the anomalous behavior of mobile molecules correlates with the intracellular environment, leading to description as a percolation cluster, as demonstrated using TEM analysis. We confirmed by the simulation that the above-mentioned in vivo like properties are different from those of homogeneously concentrated environments. Additionally, simulation results indicated that crowding level of an environment might affect diffusion rate of reactant. Such knowledge of the spatial information enables us to construct realistic models for in vivo diffusion and reaction systems.

The problems and perspectives for the introduction of high-rise construction in Russian cities

Science.gov (United States)

Pershina, Anna; Radzhabov, Mehman; Dormidontova, Tatyana

2018-03-01

The propose of academic affairs is discovery the principal areas of concern high-rise construction in Russia. Examples of modern Russian and foreign high-rise construction are considered in the work. The most important problems and their solutions for Russia are identified on their basis. The everyone area of concern is considered separately. Ecology problems and influence of high-rise construction for the healthy and psychological effect of people are considered special. High-rise constructions influence negative and positive for urban environment in Moscow and Samara cities. The experience lack, defects in requirements document, which don't include all high-rise constructions specific, system problem of construction and often non-availability of proper control at the existing requirements document result for complexity of designing, construction and operation. At this moment, high-rise constructions temp is increasing in Moscow. Feasibility of high-rise buildings come up in regions of Russia. The reasons include high material inputs, irregularities of requirements network and utility lines and maintenance problems. The researching follow up of conclusions and recommendations for high-rise constructions development in Russia. The reasons of high-rise buildings are urbanization of people and necessary of concentration labor supply. The important tasks for organization are creating compact urban environment, decrease urban area for development, using an innovative technology for construction and properly maintenance. The balance between the preference of high-rise construction, inputs for construction and influence for ecology are resolve for this task.

Construction of fuzzy automata by fuzzy experiments

International Nuclear Information System (INIS)

Mironov, A.

1994-01-01

The solving the problem of canonical realization of partial reaction morphisms (PRM) for automata in toposes and fuzzy automata is addressed. This problem extends the optimal construction problem for finite deterministic automata by experiments. In the present paper the conception of canonical realization of PRM for automata in toposes is introduced and the sufficient conditions for the existence of canonical realizations for PRM in toposes are presented. As a consequence of this result the existence of canonical realizations for PRM in the category of fuzzy sets over arbitrary complete chain is proven

Construction of fuzzy automata by fuzzy experiments

Energy Technology Data Exchange (ETDEWEB)

Mironov, A [Moscow Univ. (Russian Federation). Dept. of Mathematics and Computer Science

1994-12-31

The solving the problem of canonical realization of partial reaction morphisms (PRM) for automata in toposes and fuzzy automata is addressed. This problem extends the optimal construction problem for finite deterministic automata by experiments. In the present paper the conception of canonical realization of PRM for automata in toposes is introduced and the sufficient conditions for the existence of canonical realizations for PRM in toposes are presented. As a consequence of this result the existence of canonical realizations for PRM in the category of fuzzy sets over arbitrary complete chain is proven.

Climate responsive and safe earthquake construction: a community building a school

Directory of Open Access Journals (Sweden)

Hari Darshan

2011-10-01

Full Text Available This article outlines environment friendly features, climate responsive features and construction features of a prototype school building constructed using green building technology. The school building has other additional features such as earthquake resistant construction, use of local materials and local technology. The construction process not only establishes community ownership, but also facilitates dissemination of the technology to the communities. Schools are effective media for raising awareness, disseminating technology and up-scaling the innovative approach. The approach is cost effective and sustainable for long-term application of green building technology. Furthermore, this paper emphasizes that such construction technology will be instrumental to build culture of safety in communities and reduce disaster risk.

Embodied niche construction in the hominin lineage: semiotic structure and sustained attention in human embodied cognition

Science.gov (United States)

Stutz, Aaron J.

2014-01-01

Human evolution unfolded through a rather distinctive, dynamically constructed ecological niche. The human niche is not only generally terrestrial in habitat, while being flexibly and extensively heterotrophic in food-web connections. It is also defined by semiotically structured and structuring embodied cognitive interfaces, connecting the individual organism with the wider environment. The embodied dimensions of niche-population co-evolution have long involved semiotic system construction, which I hypothesize to be an evolutionarily primitive aspect of learning and higher-level cognitive integration and attention in the great apes and humans alike. A clearly pre-linguistic form of semiotic cognitive structuration is suggested to involve recursively learned and constructed object icons. Higher-level cognitive iconic representation of visually, auditorily, or haptically perceived extrasomatic objects would be learned and evoked through indexical connections to proprioceptive and affective somatic states. Thus, private cognitive signs would be defined, not only by their learned and perceived extrasomatic referents, but also by their associations to iconically represented somatic states. This evolutionary modification of animal associative learning is suggested to be adaptive in ecological niches occupied by long-lived, large-bodied ape species, facilitating memory construction and recall in highly varied foraging and social contexts, while sustaining selective attention during goal-directed behavioral sequences. The embodied niche construction (ENC) hypothesis of human evolution posits that in the early hominin lineage, natural selection further modified the ancestral ape semiotic adaptations, favoring the recursive structuration of concise iconic narratives of embodied interaction with the environment. PMID:25136323

Greenhouse Gas Emissions from Excavation on Residential Construction Sites

Directory of Open Access Journals (Sweden)

Perry Forsythe

2014-12-01

Full Text Available Despite considerable research concerning the manifestation of greenhouse gases in the usage of buildings, little has been done concerning emissions arising from the construction process itself. This paper specifically examines emissions arising from cut and fill excavation on residential construction sites. Even though such excavation is often seen as being economical in terms of providing a flat base for concrete raft slab construction, the environmental consequences of this approach need to be considered more fully in terms of impact on the environment. This is particularly important when steeply sloping sites are involved and for different soil types. The paper undertakes a study that quantitatively assesses the cumulative greenhouse gas emissions caused by cut and fill excavation on 52 residential projects in Australia for a range of slope and soil types. The paper presents results from the study and concludes that greenhouse gas emissions increase as site slope increases; the building footprint area (as distinct from Gross Floor Area, exposes the need to reduce the area of the building to reduce greenhouse gas emissions; excavation of rock soils creates higher emissions than other soil types; and cut and fill excavation on steeply slope sites increase emissions. Potential alternative construction includes suspended floor construction systems which involve less excavation.

Greenhouse Gas Emissions from Excavation on Residential Construction Sites

Directory of Open Access Journals (Sweden)

Perry Forsythe

2014-12-01

Full Text Available Despite considerable research concerning the manifestation of greenhouse gases in the usage of buildings, little has been done concerning emissions arising from the construction process itself. This paper specifically examines emissions arising from cut and fill excavation on residential construction sites. Even though such excavation is often seen as being economical in terms of providing a flat base for concrete raft slab construction, the environmental consequences of this approach need to be considered more fully in terms of impact on the environment. This is particularly important when steeply sloping sites are involved and for different soil types. The paper undertakes a study that quantitatively assesses the cumulative greenhouse gas emissions caused by cut and fill excavation on 52 residential projects in Australia for a range of slope and soil types. The paper presents results from the study and concludes that greenhouse gas emissions increase as site slope increases; the building footprint area (as distinct from Gross Floor Area, exposes the need to reduce the area of the building to reduce greenhouse gas emissions; excavation of rock soils creates higher emissions than other soil types; and cut and fill excavation on steeply slope sites increase emissions. Potential alternative construction includes suspended floor construction systems which involve less excavation. 

Construction and maintenance of underground mine roads

Energy Technology Data Exchange (ETDEWEB)

Logan, A.S.; Seedsman, R.W. [Coffey Partners International Pty. Ltd. (Australia)

1995-12-31

Good roads are essential in moving men and materials to and from the underground workplace. An underground coal industry funded project was recently completed on underground mine road construction and maintenance. This paper discusses practical approaches to construction and maintenance of underground mine roads using transferable civil technologies and innovative techniques. Mine pavements are generally low-cost (relative to civil roads), constructed to varying standards using locally available materials to best meet the mobility needs of the mine. Performance of pavements is thus largely dependent on the environmental conditions, quality of the available road making materials, maintenance policies and available resources. This paper explains the causes of bad roads in various underground environments. It details available management strategies, construction and water control techniques, road maintenance and vehicle considerations. It concludes that the trend to larger rubber tires mining equipment needs to be matched with construction and maintenance of high quality road surfaces. For large operations, the total cost due to poor roads may equate to in excess of $A1 million per annum. The strategies outlined in this paper provide the basis for construction and maintenance of underground mine roads to help achieve desired production targets. (author). 2 tabs., 4 figs., 7 refs.

Linking climate change to water provision: greywater treatment by constructed wetlands

Science.gov (United States)

Qomariyah, S.; Ramelan, AH; Setyono, P.; Sobriyah

2018-03-01

Climate change has been felt to take place in Indonesia, causing the temperature to increase, additional drought with more moisture evaporates from rivers, lakes, and other bodies of water, and intense rainfall in a shorter rainy season. One of the major concerns is the risk of severe drought leading to water shortages. It will affect water supply and agriculture yields. As a country extremely vulnerable to the climate change, Indonesia must adapt to the serious environmental issues. This paper aims to offer an effort of water provision by recycling and reusing of greywater applying constructed wetland systems. The treated greywater is useful as water provision for non-consumptive uses. A recent experiment was conducted on a household yard using a single horizontal subsurface flow type of constructed wetland. The experiments demonstrated that the constructed wetland systems reduced effectively the pollutants of TSS, BOD, COD, and detergent to the level that are compliant with regulatory standards. The constructed wetland has been established for almost two years however the system still works properly.

DynaLearn-An Intelligent Learning Environment for Learning Conceptual Knowledge

NARCIS (Netherlands)

Bredeweg, Bert; Liem, Jochem; Beek, Wouter; Linnebank, Floris; Gracia, Jorge; Lozano, Esther; Wißner, Michael; Bühling, René; Salles, Paulo; Noble, Richard; Zitek, Andreas; Borisova, Petya; Mioduser, David

2013-01-01

Articulating thought in computerbased media is a powerful means for humans to develop their understanding of phenomena. We have created DynaLearn, an intelligent learning environment that allows learners to acquire conceptual knowledge by constructing and simulating qualitative models of how systems

Shaping and Being Shaped by Environments for Learning Science. Continuities with the Space and Democratic Vision of a Century Ago

Science.gov (United States)

Cavicchi, Elizabeth

2017-07-01

Environments of learning often remain unnoticed and unacknowledged. This study follows a student and myself as we became aware of our local environment at MIT and welcomed that environment as a vibrant contributor to our learning. We met this environment in part through its educational heritage in two centennial anniversaries: John Dewey's 1916 work Democracy and Education and MIT's 1916 move from Boston to the Cambridge campus designed by architect William Welles Bosworth. Dewey argued that for learning to arise through constructive, active engagement among students, the environment must be structured to accommodate investigation. In designing an environment conducive to practical and inventive studies, Bosworth created organic classical forms harboring the illusion of symmetry, while actually departing from it. Students and I are made open to the effects of this environment through the research pedagogy of "critical exploration in the classroom," which informs my practice of listening and responding, and teaching while researching; it lays fertile grounds for the involvement of one student and myself with our environment. Through viewing the moon and sky by eye, telescope, airplane, and astrolabe, the student developed as an observer. She became connected with the larger universe, and critical of formalisms that encage mind and space. Applying Euclid's geometry to the architecture outdoors, the student noticed and questioned classical features in Bosworth's buildings. By encountering these buildings while accompanied by their current restorer, we came to see means by which their structure and design promote human interaction and environmental sustainability as intrinsic to education. The student responded creatively to Bosworth's buildings through photography, learning view-camera, and darkroom techniques. In Dewey's view, democracy entails rejecting dualisms endemic in academic culture since the Greek classical era. Dewey regarded experimental science, where

Accidents in Malaysian construction industry: statistical data and court cases.

Science.gov (United States)

Chong, Heap Yih; Low, Thuan Siang

2014-01-01

Safety and health issues remain critical to the construction industry due to its working environment and the complexity of working practises. This research attempts to adopt 2 research approaches using statistical data and court cases to address and identify the causes and behavior underlying construction safety and health issues in Malaysia. Factual data on the period of 2000-2009 were retrieved to identify the causes and agents that contributed to health issues. Moreover, court cases were tabulated and analyzed to identify legal patterns of parties involved in construction site accidents. Approaches of this research produced consistent results and highlighted a significant reduction in the rate of accidents per construction project in Malaysia.

THE CONSTRUCTION SECTOR CHAIN DISASTER THEORY AND A CASE STUDY

Directory of Open Access Journals (Sweden)

Amir S. GOHARDANI

2013-11-01

Full Text Available Management approaches are of paramount importance in the built environment. Efficient management approaches ensure timely project completions and consequently lead to economic growth. However, there are also challenges within the construction industry that could lead to disastrous effects and to significant death tolls. In this article, the Construction Sector Chain Disaster Theory (CSCDT is presented. This theory mirrors the construction sector as an ongoing disaster zone. In light of CSCDT, a limited number of past accidents within the global construction industry will be investigated with respect to the building blocks of the theory and in view of inadequate management practices that have made positive contributions to triggering disasters. The identified shortcomings will enable a more comprehensive approach to management in favor of disaster minimization in the construction sector.

The Impact of High-Rise Buildings on the Living Environment

Directory of Open Access Journals (Sweden)

Giyasov Botir

2018-01-01

Full Text Available Urbanization as a socio-economic process manifested in the concentration of the population in modern big cities contributes to the development of high-rise building construction. With the development of education and culture, changing leisure habits, city residents put forward new architectural and functional requirements to the living environment and urban infrastructure. This calls for the creation of new types and forms of residential buildings, the structure of the city and transport networks. In addition, the need to develop high-rise building construction is justified by the growing demand for residential, public and administrative buildings and the lack of free space.The paper analyzes the development of high-rise building construction in urban areas. The problem of the impact of high-rise building construction in big cities on the living environment is considered. Using analytical methods, causes and sources of pollution, such as transport and engineering infrastructure have been identified. In some urban areas, there are zones with modified thermal conditions and air exchange resulting in the formation of the “urban heat island”The qualitative and quantitative characteristics of variations in temperature and wind speed with respect to the height of the building have been calculated, using the example of the Evolution Tower of the Moscow International Business Center (“Moscow City”. Calculation and comparative analysis for the cities of Moscow, Khanty-Mansiysk and Vladivostok has made it possible to assess the variation in temperature and wind speed and their impact on the living environment under different climatic conditions.

The Impact of High-Rise Buildings on the Living Environment

Science.gov (United States)

Giyasov, Botir; Giyasova, Irina

2018-03-01

Urbanization as a socio-economic process manifested in the concentration of the population in modern big cities contributes to the development of high-rise building construction. With the development of education and culture, changing leisure habits, city residents put forward new architectural and functional requirements to the living environment and urban infrastructure. This calls for the creation of new types and forms of residential buildings, the structure of the city and transport networks. In addition, the need to develop high-rise building construction is justified by the growing demand for residential, public and administrative buildings and the lack of free space.The paper analyzes the development of high-rise building construction in urban areas. The problem of the impact of high-rise building construction in big cities on the living environment is considered. Using analytical methods, causes and sources of pollution, such as transport and engineering infrastructure have been identified. In some urban areas, there are zones with modified thermal conditions and air exchange resulting in the formation of the "urban heat island"The qualitative and quantitative characteristics of variations in temperature and wind speed with respect to the height of the building have been calculated, using the example of the Evolution Tower of the Moscow International Business Center ("Moscow City"). Calculation and comparative analysis for the cities of Moscow, Khanty-Mansiysk and Vladivostok has made it possible to assess the variation in temperature and wind speed and their impact on the living environment under different climatic conditions.

Towards a Competency-based Vision for Construction Safety Education

Science.gov (United States)

Pedro, Akeem; Hai Chien, Pham; Park, Chan Sik

2018-04-01

Accidents still prevail in the construction industry, resulting in injuries and fatalities all over the world. Educational programs in construction should deliver safety knowledge and skills to students who will become responsible for ensuring safe construction work environments in the future. However, there is a gap between the competencies current pedagogical approaches target, and those required for safety in practice. This study contributes to addressing this issue in three steps. Firstly, a vision for competency-based construction safety education is conceived. Building upon this, a research scheme to achieve the vision is developed, and the first step of the scheme is initiated in this study. The critical competencies required for safety education are investigated through analyses of literature, and confirmed through surveys with construction and safety management professionals. Results from the study would be useful in establishing and orienting education programs towards current industry safety needs and requirements

The Relationship of Stressors and Stress on Injury Incident of Construction Workers in Penang

Directory of Open Access Journals (Sweden)

Muhd Ali Khairul Ammar

2016-01-01

Full Text Available Construction Workers (CWs are the main source of manpower that is necessary to every construction project. Non conducive and hazardous working environment at construction site will affect the physiological health of the construction labour. This study is conducted to explore the impact of job stress and emotional stress to the CWs that potentially lead to injuries incident in Penang. Twelve stressors were identified through factor analysis. Then, the stressors are classified into five main categories. Questionnaires were developed according to the stressstressor relationship. The correlation between factors of injury incident (stressor and stress shows that lack of autonomy and inappropriate safety equipment lead to the emotional stress among the CWs with 0.287 and 0.204 respectively. In addition, poor physical environment causes the job stress among CWs with the correlation of 0.270.

Construction and Application of Enhanced Remote Sensing Ecological Index

Science.gov (United States)

Wang, X.; Liu, C.; Fu, Q.; Yin, B.

2018-04-01

In order to monitor the change of regional ecological environment quality, this paper use MODIS and DMSP / OLS remote sensing data, from the production capacity, external disturbance changes and human socio-economic development of the three main factors affecting the quality of ecosystems, select the net primary productivity, vegetation index and light index, using the principal component analysis method to automatically determine the weight coefficient, construction of the formation of enhanced remote sensing ecological index, and the ecological environment quality of Hainan Island from 2001 to 2013 was monitored and analyzed. The enhanced remote sensing ecological index combines the effects of the natural environment and human activities on ecosystems, and according to the contribution of each principal component automatically determine the weight coefficient, avoid the design of the weight of the parameters caused by the calculation of the human error, which provides a new method for the operational operation of regional macro ecological environment quality monitoring. During the period from 2001 to 2013, the ecological environment quality of Hainan Island showed the characteristics of decend first and then rise, the ecological environment in 2005 was affected by severe natural disasters, and the quality of ecological environment dropped sharply. Compared with 2001, in 2013 about 20000 square kilometers regional ecological environmental quality has improved, about 8760 square kilometers regional ecological environment quality is relatively stable, about 5272 square kilometers regional ecological environment quality has decreased. On the whole, the quality of ecological environment in the study area is good, the frequent occurrence of natural disasters, on the quality of the ecological environment to a certain extent.

A platform for communicating construction material information between e-commerce systems

Institute of Scientific and Technical Information of China (English)

Stephen C W Kong; LI Heng; SHEN Qi-ping

2004-01-01

E-commerce systems for construction material procurement are becoming increasingly important in Hong Kong. These E-commerce systems are non-interoperable and create problems for the buyers who use these systems to purchase construction materials. This paper presents the mobile agent-based approach and Web serv-ices-based approach for enabling interoperation of these systems in the E-Union environment.

Towards green construction

International Nuclear Information System (INIS)

Bajracharya, Bijaya B.; Shrestha, Prasanna M.