WorldWideScience

Sample records for conformationelle avec modulation

  1. Intensity-modulated radiation therapy for head and neck cancers with bilateral irradiation of the neck: preliminary results; Radiotherapie conformationnelle avec modulation d'intensite des cancers des voies aerodigestives superieures avec irradiation bilaterale du cou: resultats preliminaires

    Energy Technology Data Exchange (ETDEWEB)

    Lapeyre, M.; Mege, A.; Mege, P.; Racadot, S.; Marchal, C. [Centre Alexis-Vautrin, Dept. de radiotherapie, avenue de Bourgogne, Unite de radiotherapie externe, 54 - Vandoeuvre-les-Nancy (France); Marchesi, V.; Aletti, P.; Noel, A. [Centre Alexis-Vautrin, Dept. de radiotherapie, avenue de Bourgogne, Unite de radiophysique, 54 - Vandoeuvre-les-Nancy (France); Noel, A.; Marchal, C. [Institut National Polytechnique de Lorraine, Universite Henri-Poincare, Centre de Recherche en Automatique de Nancy, UMR CNRS 7039 Nancy-I, 54 - Vandoeuvre-les-Nancy (France)

    2004-06-01

    Purpose. - To report preliminary results of a prospective study of intensity-modulated radiotherapy (IMRT) for head and neck squamous cell carcinoma (HNC) with bilateral irradiation of the neck. Patients and methods. - At the Alexis Vautrin Cancer Center, 23 patients have been treated with IMRT for HNC since January 2002-August 2003. The first 10 patients with a minimum follow-up of 3 months were analyzed. All tumors were oropharyngeal. There were four females and six males, with a mean age of 50 years (range 39-66). Stages were I-II in eight and III-IV in two. CTV1 was microscopic disease and N0 neck (prescribed dose: 50 Gy) and CTV2 was macroscopic disease and the volume at risk (prescribed dose: 66-70 Gy). PTV were CTV + 5 mm. Patient's immobilization consisted of a five-point head neck shoulder thermoplastic mask. Set-up verifications were done by semi-automatically matching portal images and digitized reconstructed radiographs. IMRT used dynamic multi-leaf collimation. Five patients (group A) received 50 Gy IMRT (two post-operative and three with a brachytherapy boost with a mean dose: 27.5 Gy), and five patients (group B) received 66-70 Gy IMRT (four post-operative). Acute and late normal tissue effects were graded according to the RTOG-EORTC radiation morbidity scoring criteria. Results. - With a median follow-up of 7.4 months (range 3-18.5), no patient died or had loco-regional relapse. The displacements were <4 mm in 98% cases. CTV1 and 2 received 95% of the prescribed dose in 100% of the volume. On average the mean dose to the contralateral parotid was 25.5 Gy for group A vs. 31 Gy for group B (P = 0.09). Mean doses <26 Gy were obtained in three of five patients in group A vs. zero of five patients in group B (P = 0.04). Acute skin toxicities were grade 1 in five patients, grade 2 in four and grade 3 in one. Acute mucositis cases were grade 1 in three patients, grade 2 in five and localized grade 3 in two. At 3 months, 50% of the patients had a grade

  2. Chemotherapy and intensity modulated conformational radiotherapy for locally advanced pancreas cancers; Chimiotherapie et radiotherapie conformationnelle avec modulation d'intensite pour les cancers du pancreas localement evolues

    Energy Technology Data Exchange (ETDEWEB)

    Huguet, F. [Hopital Tenon, Paris (France); Wu, A.; Zhang, Z.; Winston, C.; Reidy, D.; Ho, A.; Allen, P.; Karyn, G. [Memorial Sloan-Kettering Cancer Center, New York (United States)

    2011-10-15

    The authors report a retrospective study of the tolerance and survival of 48 patients who have been treated by a chemotherapy followed by a chemotherapy concomitant with an intensity-modulated radiotherapy for a locally advanced pancreas cancer. Results are discussed in terms of toxicity, cancer response, operability, survival rate. Tolerance is good. Local control rates, global survival rates and secondary resection rates are promising. Short communication

  3. Cervix carcinomas: place of intensity-modulated radiotherapy; Les cancers du col uterin: place de la radiotherapie avec modulation d'intensite

    Energy Technology Data Exchange (ETDEWEB)

    Barillot, I. [Centre Regional Universitaire de Cancerologie H.S.-Kaplan, Hopital Bretonneau, CHU de Tours, 37 - Tours (France); Universite Francois-Rabelais, 37 - Tours (France)

    2009-10-15

    While indications of modulated intensity radiation therapy (I.M.R.T.) are perfectly defined in head and neck and prostate cancer patients, this technique remains under evaluation for gynecologic tumours. The implementation of conformal three dimensional radiotherapy in the late 1990 has been the first important step for optimisation of treatment of cervix carcinomas, as it permitted a better target coverage with a significant reduction of the bladder dose. However, this technique often leads to an irradiation of a larger volume of rectum in locally advanced stages and could only spare a limited amount of intestine. I.R.M.T. is one of the optimisation methods potentially efficient for a better sparing of digestive tract during irradiation of cervix carcinomas. The aim of this literature review is to provide the arguments supporting this hypothesis, and to define the place of this technique for dose escalation. (authors)

  4. Intensity-modulated radiation therapy for anal carcinoma; Radiotherapie conformationnelle avec modulation d'intensite des cancers de l'anus

    Energy Technology Data Exchange (ETDEWEB)

    Peiffert, D.; Moreau-Claeys, M.V.; Tournier-Rangeard, L.; Huger, S.; Marchesi, V. [Departement de radiotherapie, centre Alexis-Vautrin, 6, avenue de Bourgogne, 54511 Vandoeuvre-les-Nancy cedex (France)

    2011-10-15

    Anal canal carcinoma are highly curable by irradiation, combined with chemotherapy in locally advanced disease, with preservation of sphincter function. The clinical target volume for the nodes is extended, often including the inguinal nodes, which is not usual for other pelvic tumours. Acute and late effects are correlated with the volume and dose delivered to organs at risk, i. e. small bowel, bladder and increased by concomitant chemotherapy. Intensity modulated irradiation (IMRT) makes it possible to optimize the dose distribution in this 'complex U shaped' volume, while maintaining the dose distribution for the target volumes. The conversion from conformal irradiation to IMRT necessitates good knowledge of the definition and skills to delineate target volumes and organs at risk, including new volumes needed to optimize the dose distribution. Dosimetric and clinical benefits of IMRT are described, based on early descriptions and evidence-based publication. The growing development of IMRT in anal canal radiotherapy must be encouraged, and long-term benefits should be soon published. Radiation oncologists should precisely learn IMRT recommendations before starting the technique, and evaluate its early and late results for adverse effects, but also for long-term tumour control. (authors)

  5. Intensity modulated radiation therapy: Analysis of patient specific quality control results, experience of Rene-Gauducheau Centre; Radiotherapie conformationnelle avec modulation d'intensite: analyse des resultats des controles precliniques, experience du centre Rene-Gauducheau

    Energy Technology Data Exchange (ETDEWEB)

    Chiavassa, S.; Brunet, G.; Gaudaire, S.; Munos-Llagostera, C.; Delpon, G.; Lisbona, A. [Service de physique medicale, centre Rene-Gauducheau, CLCC Nantes Atlantique, site hospitalier Nord, boulevard Jacques-Monod, 44805 Nantes Saint-Herblain cedex (France)

    2011-07-15

    Purpose. - Systematic verifications of patient's specific intensity-modulated radiation treatments are usually performed with absolute and relative measurements. The results constitute a database which allows the identification of potential systematic errors. Material and methods. - We analyzed 1270 beams distributed in 232 treatment plans. Step-and-shoot intensity-modulated radiation treatments were performed with a Clinac (6 and 23 MV) and sliding window intensity-modulated radiation treatments with a Novalis (6 MV). Results. - The distributions obtained do not show systematic error and all the control meet specified tolerances. Conclusion. - These results allow us to reduce controls specific patients for treatments performed under identical conditions (location, optimization and segmentation parameters of treatment planning system, etc.). (authors)

  6. Intensity modulated radiation therapy for head and neck cancer: The standard; Radiotherapie avec modulation d'intensite pour les cancers de la tete et du cou: le standard

    Energy Technology Data Exchange (ETDEWEB)

    Maingon, P.; Crehange, G.; Chamois, J.; Khoury, C.; Truc, G. [Departement de radiotherapie, centre Georges-Francois-Leclerc, 1, rue du Pr-Marion, 21079 Dijon cedex (France)

    2011-10-15

    Combined radical radiation therapy for head and neck carcinoma should be planned with intensity modulated beams to provide a rapid answer to patients' requirements in terms of quality of treatment. The most frequent late toxicity of radiation therapy is xerostomia, which may be prevented by using this technique able to significantly spare salivary glands irradiation. Selection of indications is a very important step. The objective of sparing salivary functions, strongly associated with optimization criteria of quality of life should be considered as a main objective in irradiation of head and neck tumours. The various possibilities offered by this technique allowing to boost a target volume included in prophylactically irradiated regions could offer the possibility to escalate the dose in selected patients. The feasibility of this process is currently validated in prospective studies. Finally, routine implementation of intensity modulated radiation therapy should be performed with strong and robust quality assurance procedures, ensuring that the expected benefit could be increased with the current developments by using rotational techniques. (authors)

  7. Nasopharynx carcinoma treatment: from the conventional radiotherapy to the conformal radiotherapy with intensity modulation; Traitement du carcinome du nasopharynx: de la radiotherapie conventionnelle a la radiotherapie conformationnelle avec modulation d'intensite

    Energy Technology Data Exchange (ETDEWEB)

    Mokaouim, K.; Grehange, G.; Truc, G.; Peingnaux, K.; Martin, E.; Zanetta, S.; Bruchon, Y.; Bonnetain, F.; Maingon, P. [Centre Georges-Francois Leclerc, 21 - Dijon (France)

    2009-10-15

    The objective of this study was to evaluate retrospectively the impact of factors linked to the radiotherapy realisation on the local and locoregional control, the global survival, the survival without disease of patients suffering of naso-pharynx carcinoma. Conclusion: the patients suffering of a nasopharynx carcinoma treated by irradiation associated to chemotherapy have an improved global survival and an improved survival without disease. The conformal radiotherapy with or without modulated intensity reduce the risk of serous otitis, trismus and xerostomia at long term. It seems necessary to realize multi centric studies with a longer period of follow up before asserting the advantages of the I.M.R.T. in comparison to the classical and conformal technique in the treatment of naso-pharynx carcinomas. (N.C.)

  8. Target volume delineation for head and neck cancer intensity-modulated radiotherapy; Delineation des volumes cibles des cancers des voies aerodigestives superieures en radiotherapie conformationnelle avec modulation d'intensite

    Energy Technology Data Exchange (ETDEWEB)

    Lapeyre, M.; Toledano, I.; Bourry, N. [Departement de radiotherapie, centre Jean-Perrin, 58, rue Montalembert, BP 5026, 63011 Clermont-Ferrand cedex 1 (France); Bailly, C. [Unite de radiodiagnostic, centre Jean-Perrin, 58, rue Montalembert, BP 5026, 63011 Clermont-Ferrand cedex 1 (France); Cachin, F. [Unite de medecine nucleaire, centre Jean-Perrin, 58, rue Montalembert, BP 5026, 63011 Clermont-Ferrand cedex 1 (France)

    2011-10-15

    This article describes the determination and the delineation of the target volumes for head-and-neck cancers treated with intensity-modulated radiotherapy (IMRT). The delineation of the clinical target volumes (CTV) on the computerized tomography scanner (CT scan) requires a rigorous methodology due to the complexity of head-and-neck anatomy. The clinical examination with a sketch of pretreatment tumour extension, the surgical and pathological reports and the adequate images (CT scan, magnetic resonance imaging and fluorodeoxyglucose positron emission tomography) are necessary for the delineation. The target volumes depend on the overall strategy: sequential IMRT or simultaneous integrated boost-IMRT (SIB-IMRT). The concept of selectivity of the potential subclinical disease near the primary tumor and the selection of neck nodal targets are described according to the recommendations and the literature. The planing target volume (PTV), mainly reflecting setup errors (random and systematic), results from a uniform 4-5 mm expansion around the CTV. We propose the successive delineation of: (1) the gross volume tumour (GTV); (2) the 'high risk' CTV1 around the GTV or including the postoperative tumour bed in case of positive margins or nodal extra-capsular spread (65-70 Gy in 30-35 fractions); (3) the CTV2 'intermediate risk' around the CTV1 for SIB-IMRT (59-63 Gy in 30-35 fractions); (4) the 'low-risk' CTV3 (54-56 Gy in 30-35 fractions); (5) the PTVs. (authors)

  9. Statistical process control applied to intensity modulated radiotherapy pretreatment controls with portal dosimetry;Maitrise statistique des processus appliquee aux controles avant traitement par dosimetrie portale en radiotherapie conformationnelle avec modulation d'intensite

    Energy Technology Data Exchange (ETDEWEB)

    Villani, N.; Noel, A. [Laboratoire de recherche en radiophysique, CRAN UMR 7039, Nancy universite-CNRS, 54 - Vandoeuvre-les-Nancy (France); Villani, N.; Gerard, K.; Marchesi, V.; Huger, S.; Noel, A. [Departement de radiophysique, centre Alexis-Vautrin, 54 - Vandoeuvre-les-Nancy (France); Francois, P. [Institut Curie, 75 - Paris (France)

    2010-06-15

    Purpose The first purpose of this study was to illustrate the contribution of statistical process control for a better security in intensity modulated radiotherapy (I.M.R.T.) treatments. This improvement is possible by controlling the dose delivery process, characterized by pretreatment quality control results. So, it is necessary to put under control portal dosimetry measurements (currently, the ionisation chamber measurements were already monitored by statistical process control thanks to statistical process control tools). The second objective was to state whether it is possible to substitute ionisation chamber with portal dosimetry in order to optimize time devoted to pretreatment quality control. Patients and methods At Alexis-Vautrin center, pretreatment quality controls in I.M.R.T. for prostate and head and neck treatments were performed for each beam of each patient. These controls were made with an ionisation chamber, which is the reference detector for the absolute dose measurement, and with portal dosimetry for the verification of dose distribution. Statistical process control is a statistical analysis method, coming from industry, used to control and improve the studied process quality. It uses graphic tools as control maps to follow-up process, warning the operator in case of failure, and quantitative tools to evaluate the process toward its ability to respect guidelines: this is the capability study. The study was performed on 450 head and neck beams and on 100 prostate beams. Results Control charts, showing drifts, both slow and weak, and also both strong and fast, of mean and standard deviation have been established and have shown special cause introduced (manual shift of the leaf gap of the multi-leaf collimator). Correlation between dose measured at one point, given with the E.P.I.D. and the ionisation chamber has been evaluated at more than 97% and disagreement cases between the two measurements were identified. Conclusion The study allowed to

  10. Apprendre à programmer avec Python

    CERN Document Server

    Swinnen, Gérard

    2009-01-01

    Quel meilleur choix pour apprendre la programmation qu'un langage moderne et élégant tel que Python, aussi bon pour le développement d'applications web que pour la réalisation de scripts système ou l'analyse de fichiers textuels ? Un support de cours réputé et adopté par de nombreux enseignants, avec 40 pages d'exercices corrigés Reconnu et utilisé par les enseignants de nombreuses écoles et IUT, complété d'exercices accompagnés de leurs corrigés, cet ouvrage original et érudit est une référence sur tous les fondamentaux de la programmation : choix d'une structure de données, paramétrage, modularité, orientation objet et héritage, conception d'interface, multithreading et gestion d'événements, protocoles de communication et gestion réseau, formulaires web et (GI, bases de données) jusqu'à la désormais indispensable norme Unicode (le format UTF-8).

  11. Avec Orima - Designing the brand identity

    OpenAIRE

    Nguyen Le Quynh, Nga; Carvalho, Maria Clara da Costa

    2016-01-01

    The thesis is a document in building the brand image for the authors’ own start-up Avec Orima. It is motivated by the need to take the company from the planning stage to the next very first step of implementing the business – designing the company’s brand identity. The thesis focused on the process of designing the brand identity. The process began with analysing the company and Finnish target market to have the insights on what the company stands for and wants to achieve. The study then ...

  12. Eisenstein contemporain : entretien avec Antonio Somaini

    Directory of Open Access Journals (Sweden)

    Bruno Leites

    2016-04-01

    Full Text Available Entretien avec Antonio Somaini à propos des films, des écrits et des dessins de Sergei Eisenstein. Somaini est actuellement un des plus grands spécialistes de l’œuvre d’Eisenstein. À l’entretien, nous parlons de nombreux sujets : les défis de traduire les ouvrages d’Eisenstein, les phases de sa carrière, le développement de sa pensée, la relation de ses films avec ses écrits, sa pratique du dessin et sa passion pour les dessins de Walt Disney. C’est un long entretien dans laquelle nous parlons aussi des principaux concepts d’Eisenstein, tels que l’extase, le pathos, l’organicité, l’attraction, la régression et la plasmaticité. Somaini nous parle également de la spécificité de son travail et de l’urgence de reprendre Eisenstein. D’un côté, il faut le faire sortir de l’histoire du cinéma exclusivement et l’inclure dans le réseau le plus vaste des arts et de la pensée des années 1920, 1930 et 1940. De l’autre côté, il faut penser son projet comme essentiellement contemporain. Comme Somaini l’a dit, ce que nous pensons beaucoup aujourd’hui, le dispositif cinématographique, le rapport entre le cinéma et l’histoire de l’art, l'influence des images sur l’ensemble de l’expérience humaine, cela a toujours été le problème d’Eisenstein.

  13. Dosimetric comparison between conformational irradiation and helical tomo-therapy in supra-diaphragmatic Hodgkin disease in paediatrics; Comparaison dosimetrique entre l'irradiation conformationelle et la tomotherapie helicoidale dans la maladie de Hodgkin sus-diaphragmatique en pediatrie

    Energy Technology Data Exchange (ETDEWEB)

    Padovani, L.; Taright, N.; Muraracciole, X.; Nomikossof, N.; Capdeville, S.; Portal, T.; Cowen, D. [Assistance publique-hopitaux de Marseille (France)

    2011-10-15

    The authors report the comparison of dosimetry when using three-dimensional conformational radiotherapy or intensity-modulated conformational radiotherapy (IMRT) in the case of 13 children treated for a Hodgkin disease. The comparison is made in terms of previsional target volume (PTV) coverage and of doses received at the level of organs at risk. Coverage is almost the same for both techniques. Helical tomo-therapy allows the reduction of doses delivered to the heart, spine and lungs, including low doses (V5 and V10) while respecting an identical PTV coverage. This dose reduction could result in a reduction of toxicity on the long term, which is a major challenge for cured children. Short communication

  14. Implementation of intensity-modulated conformational radiotherapy (IMRT) for the treatment of cervical cancers at the Alexis-Vautrin Centre; Implementation de la radiotherapie conformationnelle avec modulation d'intensite (RCMI) pour le traitement des cancers du col uterin au centre Alexis-Vautrin

    Energy Technology Data Exchange (ETDEWEB)

    Renard-Oldrini, S.; Brunaud, C.; Marchesi, V.; Tournier-Rangeard, L.; Peiffert, D. [Centre Alexis-Vautrin, 54 - Nancy (France)

    2010-10-15

    The authors discuss the comparison of the treatment plans of eleven patients treated either by conformational irradiation for seven of them, or by intensity-modulated conformational irradiation (IMRT) for four of them. The IMRT results in a good target volume coverage, can better protect the intestine than the conventional irradiation, and therefore is very promising, notably in terms of digestive toxicity. Short communication

  15. The recovery of the salivary function in the course of time among patients damaged by a cancer of the O.R.L. sphere treated by conformal irradiation with intensity modulation; La recuperation de la fonction salivaire au cours du temps chez les patients atteints de cancer de la sphere ORL traite par irradiation conformationnelle avec modulation d'intensite

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, M.; Valinta, D.; Banal, P.; Roch, P.; Bensaoula, O.; Labib, A. [Centre Rene-Huguenin, 92 - Saint-Cloud (France); Halimi, P.; Hans, S. [Hopital Europeen Georges-Pompidou, 75 - Paris (France)

    2006-11-15

    The conformal radiotherapy with intensity modulation (R.C.M.I.) has allowed for 8 patients a partial preservation of the salivary production. The salivary production was insufficient to allow a correct quality of life for patients because the decrease of salivary production had a limited clinical translation. (N.C.)

  16. Le combat avec l'ange

    Directory of Open Access Journals (Sweden)

    Christian Lalive d’Épinay

    2007-06-01

    Full Text Available L'auteur « revisite » le parcours qui l'a conduit à réaliser dans les années 1960 une des premières études du mouvement évangélique pentecôtiste en Amérique latine. Il rappelle d'abord les termes par lesquels il avait prétendu cadrer sa relation avec son objet de recherche, pour décrire ensuite l'étrange dialectique sujet/objet qui s'était développée au fur et à mesure de son immersion dans une double altérité, l'Amérique latine et le mouvement charismatique. Pendant ce voyage au long cours, l'« objet » avait pris vie ; il était devenu un sujet qui imposait au chercheur qui s'était cru « sujet » des interrogations nouvelles en même temps qu'une mise en question de ses certitudes du départ.The combat with the angel. Concerning a study on the Pentecostal movement in ChileThe author retraces the path that led him in the 1960s to carry out one of the first studies on the Pentecostal evangelical movement in Latin America. After recalling the terms on which he sought to situate his relationship with the research topic, he goes on to describe the strange subject/object dialectic that developed as he gradually became more and more immersed in a dual otherness, Latin America and the charismatic movement. During this lengthy voyage, the “object” of his research took on a life of its own, mutating into a subject that confronted the researcher (who had assumed that he was the “subject” with new questions and a need to reconsider his initial certitudes.La pelea con el ángel. Acerca de un estudio del movimiento pentecostal en ChileEl autor “revisita” el camino que lo había llevado a desarrollar uno de los primeros estudios sobre el movimiento evangélico pentecostal en América latina en los años’60. Recuerda primero los términos con los que había pretendido encuadrar la relación con su objeto de investigación, para describir luego el extraño vínculo sujeto/objeto que se había ido generando mientras

  17. Juif avec les Juifs, Grecs avec les Grecs, psychanalyste avec les psychanalystes,...un problème très catholique

    NARCIS (Netherlands)

    Vandermeersch, P.M.G.P.

    1990-01-01

    Avec ce texte j'ai clôturé le 11ème congres de l'A.I.E.M.P.R. (Association Internationale d'Etudes Médico-psychologiques et Religieuses) qui a eu lieu à Anvers du 23 au 26 août 1990 sous ma présidence. J'ai stigmatisé l'usage qu'on commençait à faire de la notion lacanienne de l'ordre symbolique

  18. Communiquez avec nous | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Communiquez avec nous. Le siège social du CRDI est situé à Ottawa, au Canada. Nos quatre bureaux régionaux nous permettent de rester proches de nos chercheurs et des projets que nous finançons en Asie, en Amérique latine et dans les Caraïbes, au Moyen-Orient et en Afrique du Nord, ainsi qu'en Afrique ...

  19. coloproctectomie avec anastomose colo-sus-anale pour tumeur ...

    African Journals Online (AJOL)

    Une coloproctectomie fut réalisée le 30/06/2014 avec anastomose colo-anale, colostomie de protection sous-couvert d'une transfusion sanguine. L'examen histologique du segment colorectal prélevé objectiva une rectocolite granulomateuse autour de nombreux oeufs de schistosomes. En effet, le patient a vécu à Pahou, ...

  20. Mucocele fronto-ethmoïdale geante avec extension intracranienne ...

    African Journals Online (AJOL)

    Mucocele fronto-ethmoïdale geante avec extension intracranienne: a propos d'un cas et revue de la litterature. A Kabre, DS Zabsonre, Y Haro. Abstract. Les mucocèles sont des pseudotumeurs kystiques développées aux dépens des sinus paranasaux. D'évolution lente et silencieuse elles se révèlent le plus souvent par ...

  1. Philosophie et politique: pour une discussion avec Lansana Keit ...

    African Journals Online (AJOL)

    Résumé Dans le cadre d'un échange d'idées avec le co-éditeur, Paulin Hountondji aborde dix (10) questions théoriques sur le rôle historique de la pensée critique dans l'établissement des paramètres d'une transformation économique, politique et technologique de la société africaine. L'ensemble des questions soumis à ...

  2. Une clinique possible avec les malades d’Alzheimer

    OpenAIRE

    Fontela, Cristina; Darnaud, Thierry

    2015-01-01

    Dans cet article les auteurs montrent qu’une psychothérapie d’inspiration psychanalytique est possible avec des sujets institutionnalisés présentant une démence du type Alzheimer. Elle se justifie d’autant plus que le sujet a subi des pertes relationnelles et d’objets libidinalement investis. Le clinicien tente de s’adapter à un psychisme en proie aux troubles cognitifs où les mouvements transféro-contretransférentiels sont massifs et ont un rôle particulier dans l’économie psychique du sujet...

  3. Postoperative intensity-modulated irradiation (IMRT) of endometrial cancers: results of the 'dummy run' quality assurance procedure for phase 2 RTCMIENDOMETRE multicentric French test; Irradiation avec modulation d'intensite (RCMI) postoperatoire des cancers de l'endometre: resultats de la procedure d'assurance de qualite -dummy run- de l'essai francais multicentrique de phase 2 RTCMIENDOMETRE

    Energy Technology Data Exchange (ETDEWEB)

    Kreps, S.; Barillot, I. [CHU de Tours, 37 - Tours (France); Peignaux, K. [Centre Georges FrancoisLeclerc, 21 - Dijon (France); Nickers, P. [Centre Oscar Lambret, 59 - Lille (France); Leblanc-Onfroy, M. [Centre Rene-Gauducheau, 44 - Nantes (France); Williaume, D. [Centre Eugene-Marquis, 35 - Rennes (France); Haie-Meder, C. [Institut Gustave-Roussy, 94 - Villejuif (France); Lerouge, D. [Centre Francois Baclesse, 14 - Caen (France)

    2010-10-15

    The authors report a study which aims at assessing the impact of the intensity-modulated conformational radiotherapy on the acute intestinal toxicity of a postoperative irradiation of stage I and II endometrial cancers. Seven radiotherapy centres participated to this study. They followed a 'dummy run' procedure in order to assess their ability to respect the irradiation protocol. The authors discuss the contouring correlation for different organs. The use of the Radiation Therapy Oncology Group (RTOG) atlas leads to a better concordance between the centres. Short communication

  4. Reflexions sur l' origine du passif forme avec venire

    Directory of Open Access Journals (Sweden)

    M. Regula

    1958-12-01

    Full Text Available Le but que nous nous sommes proposé dans cette étude, est assez modeste: Il s'agit de combler une lacune de la réfutation des raisons alléguées par K. v. Ettmayer contre venire + participe passé comme base primaire du passif1 et d'expliquer l'origine de cette formule. Dans la ZRPh XLI, 42 ss., K. v. Ettmayer a fait les hypothèses suivantes: venitur ereptum puellam > *venit ereptum puellam > puella venit erepta. Cette dérivation de la périphrase verbale du passif nous paraît trop scrupuleuse et diffuse. On sait que ce savant a fait deux objections contre l'explication la plus naturelle de la formation du passif avec venire . La première, c'est que la séquence venire + p. p. ne pouvait être attesté par le latin. Mais, voici des exemples qui servent de contreargument.

  5. Particules de vie conversation avec François Englert

    CERN Document Server

    Baré, François

    2014-01-01

    Ce fut l'événement de l'année 2013 : François Englert obtenait le prix Nobel de physique pour la découverte du boson. Le premier Belge à être honoré par ce prix depuis Ilya Prigogine en 1977. Françoise Baré, journaliste à la RTBF, et Guy Duplat, ingénieur civil physicien, ex-rédacteur en chef du Soir, auteur de Une vague belge (Racine) et journaliste à La Libre Belgique, ont rencontré plusieurs fois, longuement, François Englert, avant son prix et après celui-ci. Ils étaient là lors de l'annonce de la découverte du boson de BEH, lors de l'annonce du prix Nobel et, à Stockholm, lors de la remise du prix par le roi de Suède. À eux, François Englert a accepté de raconter sa chasse au boson, sa vie, ses idées. Au fil de la conversation se dessine alors le portrait attachant d'un homme brillant et libre, habité par un rêve, celui de comprendre, de décortiquer ce monde et de chercher la beauté de ses lois. Avec, en annexe, les grands points scientifiques qui éclairent le travail de F...

  6. Mise au point du rheometre a cisaillement annulaire pour l'etude de rheologie d'un mastic bitumineux avec verre incorpore =

    Science.gov (United States)

    El Mansouri, Souleimane

    Dans le domaine viscoelastique lineaire (VEL, domaine des petites deformations), le comportement thermomecanique du bitume et du mastic bitumineux (melange uniforme de bitume et de fillers) a ete caracterise au Laboratoire des Chaussees et Materiaux Bitumineux (LCMB) de l'Ecole de technologie superieure (ETS) avec l'appui de nos partenaires externes : la Societe des Alcools du Quebec (SAQ) et Eco Entreprises Quebec (EEQ). Les proprietes rheologiques des bitumes et des mastics ont ete mesurees grâce a un nouvel outil d'investigation appele, Rheometre a Cisaillement Annulaire (RCA), sous differentes conditions de chargement. Cet appareil permet non seulement de solliciter des eprouvettes de tailles importantes par rapport a celles utilisees lors des essais classiques, mais aussi d'effectuer des essais en conditions quasi-homogenes, ce qui permet de donner acces a la loi de comportement des materiaux. Les essais sont realises sur une large gamme de temperatures et de frequences (de -15 °C a 45°C et de 0,03Hz a 10 Hz). Cette etude a ete menee principalement pour comparer le comportement d'un bitume avec celui d'un mastic bitumineux dans le domaine des petites deformations. neanmoins, dans une seconde perspective, on s'interesse a l'influence des fillers de verre de post-consommation sur le comportement d'un mastic a faibles niveaux de deformations en comparant l'evolution des modules complexes de cisaillements (G*) d'un mastic avec fillers de verre et un mastic avec fillers conventionnels (calcaire). Enfin, le modele analogique 2S2P1D est utilise pour simuler le comportement viscoelastique lineaire des bitumes et des mastics bitumineux testes lors de la campagne experimentale.

  7. Profil lipidique des personnes vivant avec le VIH sous antirétroviral ...

    African Journals Online (AJOL)

    Au regard des connaissances actuelles, aucune étude n'est disponible au Bénin sur le profil lipidique des personnes vivant avec le VIH. L'objectif de la présente étude est de décrire le profil lipidique des personnes vivant avec le VIH sous antirétroviral suivies au CHU-O/P de Porto-Novo. Il s'est agi d'une étude ...

  8. Angiomyolipome rénal agressif avec extension à la veine rénale: à ...

    African Journals Online (AJOL)

    Exceptionnellement la tumeur peut avoir un caractère agressive avec extension locorégionale et veineuse (la veine rénale et la veine cave inferieure). Nous présentons une observation d'une patiente âgée de 37 ans présentant un Angiomyolipome rénal volumineux avec extension à la veine rénale. Mots clés: Rein ...

  9. Auscultation d'ouvrages avec un capteur géotextile à fibres optiques

    Directory of Open Access Journals (Sweden)

    ARTIERES, Olivier

    2012-08-01

    Full Text Available Pour évaluer la sécurité d'un ouvrage en terre, il est indispensable de disposer et de pouvoir interpréter des données d'auscultation, mais les mesures sont parfois difficiles à mettre en place et pas toujours fiables sur le long terme. Avec l’insertion de fibres optiques dans un géotextile, la solution TenCate GeoDetect® est le premier système d'auscultation conçu spécifiquement pour les applications géotechniques. Implantée depuis huit ans avec succès sur de nombreux ouvrages, elle permet d’accéder à des informations jusqu’ici très difficiles à obtenir et ceci avec une grande précision.

  10. Recommandations nutritionnelles pratiques avec exemples de menus pour personnes vivant avec le VIH/SIDA en Afrique Noire

    Directory of Open Access Journals (Sweden)

    Estelle Anaelle Nguewo

    2008-07-01

    Full Text Available L’infection par le VIH (Virus de l’Immunodéficience Humaine est une infection chronique incurable. L’infection au VIH cause jusqu’à présent des millions de morts et entrave l’économie des pays sous développés ou en voie de développement, en l’occurrence les pays d’Afrique subsaharienne. Le but principal de la thérapie nutritionnelle en cas d’infection par le VIH est d’assurer au patient un poids normal et une alimentation appropriée couvrant ses besoins nutritionnels pendant les différentes phases de l’infection. Nous proposons des recommandations alimentaires détaillées quant aux apports recommandés en nutriments (macro- et micronutriments pour les personnes vivant avec le VIH/SIDA. La nutrition joue en général un rôle très important dans le fonctionnement optimal du système immunitaire. Puisque l’infection par le VIH/SIDA est une maladie du système immunitaire, elle influence de plusieurs manières l’état nutritionnel du patient. Une nutrition hyper calorifique et hyper protéinée saine, variée et adaptée aux besoins de l’organisme est une condition indispensable pour rester longtemps en forme en cas d’infection par le VIH/SIDA. Elle permet en outre de garder un poids normal pendant la phase asymptomatique de l’infection et d’augmenter son poids pendant la phase symptomatique. Ceci a pour but de freiner l’évolution de l’infection vers le stade SIDA. Les personnes atteintes par le VIH/SIDA devraient en plus avoir une bonne hygiène de vie et exercer régulièrement une activité sportive modérée. Elles devraient mettre l’accent sur leur protection contre toute intoxication alimentaire et sur le renforcement de leur système immunitaire. Il est en outre important en plus du besoin en nutriments des personnes atteintes par le VIH/SIDA, de tenir compte de leur situation financière et culturelle, car en Afrique il existe sur ce point une très grande différence dans la population. C

  11. Syndrome d´Apple-Peel avec nécrose intestinale | Khattala | Pan ...

    African Journals Online (AJOL)

    Syndrome d´Apple-Peel avec nécrose intestinale. Khalid Khattala, Youssef Bouabdallah. Abstract. Pan African Medical Journal 2012; 13:63. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL.

  12. Animal Certifié Conforme: Déchiffrer nos Relations avec le Vivant

    Directory of Open Access Journals (Sweden)

    Daniel W. Gade

    2014-01-01

    Full Text Available Review of Animal Certifié Conforme: Déchiffrer nos Relations avec le Vivant. Bernadette Lizet and Jacqueline Milliet, eds. 2012. Dunod/Muséum National d’Histoire Naturelle, Paris. Pp 256. €22 (paperback. ISBN 9782100582853.

  13. Réponse du fonio blanc (Digitaria exilis Stapf) à l'inoculation avec ...

    African Journals Online (AJOL)

    SARAH

    2016-07-31

    Jul 31, 2016 ... (2004) a montré que l'inoculation avec des .... fasciculatum - Go: G. mosseae - Gm: G. manihotis - Ge : G. etunicatum - Gv : G. verriculosum. Les barres ..... dépendantes de la symbiose mycorhizienne car leurs ..... hybrid cv.

  14. AVEC 2017 - Real-life depression, and affect recognition workshop and challenge

    NARCIS (Netherlands)

    Ringeval, Fabien; Schuller, Bjorn; Valstar, Michel; Gratch, Jonathan; Cowie, Roddy; Scherer, Stefan; Mozgai, Sharon; Cummins, Nicholas; Schmitt, Maximilian; Pantic, Maja

    2017-01-01

    The Audio/Visual Emotion Challenge and Workshop (AVEC 2017) "Real-life depression, and affect" will be the seventh competition event aimed at comparison of multimedia processing and machine learning methods for automatic audiovisual depression and emotion analysis, with all participants competing

  15. Summary for AVEC 2017 - Real-life depression and affect challenge and workshop

    NARCIS (Netherlands)

    Ringeval, Fabien; Schuller, Björn; Valstar, Michel; Gratch, Jonathan; Cowie, Roddy; Pantic, Maja

    2017-01-01

    The seventh Audio-Visual Emotion Challenge and workshop AVEC 2017 was held in conjunction with ACM Multimedia'17. This year, the AVECseries addresses two distinct sub-challenges: emotion recognition and depression detection. The Affect Sub-Challenge is based on a novel dataset of human-human

  16. Programme de soutien à l'interaction avec la sphère des politiques ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Programme de soutien à l'interaction avec la sphère des politiques et à la communication de l'Initiative Think tank. Les think tanks des pays en développement entendent effectuer des recherches de qualité fondées sur des données probantes pour contribuer à la résolution d'enjeux en matière de politiques dans les pays ...

  17. Afrique occidentale et centrale — De nouveaux défis relevés avec ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    25 janv. 2011 ... Ainsi, les éleveurs de l'Afrique occidentale et centrale doivent composer avec un certain nombre de changements écologiques et sociaux, tels que la vente de pâturages à des agriculteurs. La privatisation de superficies qui étaient jusque-là réservées à la vaine pâture occasionne souvent des problèmes ...

  18. Stratégies fondées sur les citoyens - collaboration avec les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Dans le cadre de ce projet, on cherchera à comprendre le climat d'insécurité au sein des collectivités touchées par la violence à Medellín, en Colombie, du point de vue de ceux qui le vivent (les populations vulnérables). Travaillant de concert avec des membres de la collectivité, les chercheurs relèveront les principaux ...

  19. L'infiltration d'une dilution ideale des solutions avec epineph rine au ...

    African Journals Online (AJOL)

    L'auteur rapporte un procédé simplifié de dilution d'une solution anesthésique avec épinéphrine passant d'une concentration de 1/100 000 à 1/800 000 pour rechercher une hémostase locale effective sans compromettre dans l'immédiat la vitalité de la vascularisation périphérique des lambeaux cutanés levés. The author ...

  20. Accouchées avec statut sérologique VIH inconnu à Lubumbashi, RD ...

    African Journals Online (AJOL)

    Introduction: Beaucoup d'enfants vivant avec le VIH ont été infectés par leurs mères. Pour prévenir la transmission verticale les femmes doivent d'abord connaître leur statut sérologique VIH .L'objectif de cette étude était de déterminer la proportion de statut VIH inconnu à la naissance et d'identifier les facteurs associés.

  1. M. G.-F. Leclerc, Préfet de la Haute-Savoie lors de sa visite dans le tunnel du LHC au Point 2 avec D. Delikaris, Département Technologie; dans la caverne de l'expérience ALICE avec B. Erazmus, Collaboration ALICE et lors de la signature du livre d'or avec F. Bordry, Chef du Département Technologie. P. Fassnacht, Conseiller au Bureau des Relations internationales présent.

    CERN Multimedia

    Jean-Claude Gadmer

    2013-01-01

    M. G.-F. Leclerc, Préfet de la Haute-Savoie lors de sa visite dans le tunnel du LHC au Point 2 avec D. Delikaris, Département Technologie; dans la caverne de l'expérience ALICE avec B. Erazmus, Collaboration ALICE et lors de la signature du livre d'or avec F. Bordry, Chef du Département Technologie. P. Fassnacht, Conseiller au Bureau des Relations internationales présent.

  2. Communication progressive du français avec 320 exercices : niveau débutant

    CERN Document Server

    Miquel, Claire

    2013-01-01

    Ce qui fait le succès de cete ouvrage de communication: Une organisation claire: la leçon sur la page de gauche; les exercices et les activités communicatives sur la page de droite 40 fiches présentant les points généralement abordés au niveau A1 du Cadre européen commun de référence pour les langues Un apprentissage progressif: il suit la progression naturelle des méthodes de français Un usage souple: pour la classe ou en auto-apprentissage Une préparation adaptée aux certifications: un entrainement efficace pour mieux réussir aux examens A découvrir dans cette deuxième édition revue et augmentée: Un CD audio avec 69 documents sonores Un test d'évaluation avec ses corrigés Des illustrations pédagogiques acutelles et colorées 50 nouveaux exercices. Un livret de corrigés est proposé à part (ISBN 978-209-038133-7).

  3. Grammaire progressive du français niveau intermédiaire : avec 680 exercices

    CERN Document Server

    Grégoire, Maïa

    2013-01-01

    Une organisation claire : la leçon de grammaire sur la page de gauche ; les exercices d'entraînement sur la page de droite ; 52 chapitres présentant les points généralement abordés aux niveaux A2 et B1 du Cadre européen commun de référence pour les langues ; Un apprentissage progressif : il suit la progression naturelle des méthodes de français ; Un usage souple : pour la classe ou en auto-apprentissage ; Une préparation adaptée aux certifications : un entraînement efficace pour mieux réussir aux examens ; Une large place faite à l'évaluation : de nombreux exercices de révision et des bilans réguliers. À découvrir dans cette troisième édition tout en couleurs : Un CD audio avec 14 documents sonores ; 80 nouveaux exercices et activités communicatives ; Des chapitres révisés et des exercices plus variés ; Un test d'évaluation avec ses corrigés ; Et... un livre web, 100% en ligne, inclus. Cet ouvrage contient un code d'activation donnant gratuitement accès sur http://livre-web.com...

  4. Compte-rendu de : Isabelle Stengers, Penser avec Whitehead, Paris : Seuil, 2002, 582p.

    Directory of Open Access Journals (Sweden)

    Pierre Cassou-Noguès

    2006-05-01

    Full Text Available L’ouvrage conjoint un double effort, que résume parfaitement le titre : Penser avec Whitehead. Au départ, l’ouvrage se présente comme un commentaire de l’œuvre de Whitehead. Isabelle Stengers cherche à éclairer les textes, souvent difficiles, de Whitehead et cela par ordre chronologique, pour en particulier analyser le passage de l’épistémologie à la cosmologie et les différentes strates de la cosmologie. Whitehead, qui a rédigé avec Russell les Principia Mathematica, commence son œuvre philo...

  5. Vérification de programmes OCaml fortement impératifs avec Why3

    OpenAIRE

    Filliâtre , Jean-Christophe; Pereira , Mário; Melo De Sousa , Simão

    2018-01-01

    International audience; Cet article présente une méthodologie pour prouver des programmes OCaml fortement impératifs avec l'outil de vérification déductive Why3. Pour un programme OCaml donné, un modèle mémoire spécifique est construit et on vérifie un programme Why3 qui le mani-pule. Une fois la preuve terminée, on utilise la capacité de Why3 à traduire ses programmes vers le langage OCaml, tout en remplaçant les opérations sur le modèle mémoire par les opérations correspondantes sur des typ...

  6. Enfants conçus avec une aide médicale dans la cohorte Elfe

    OpenAIRE

    Poulalhon, Claire

    2015-01-01

    Objectif : étudier les conditions entourant la naissance des enfants conçus avec une aide médicale, et explorer le rôle des facteurs sociaux et médicaux dans la prématurité et l’hypotrophie.Méthodes : l'analyse porte sur 9495 enfants de la cohorte Elfe, de terme supérieur à 33 semaines d'aménorrhée, singletons ou jumeaux, répartis en trois groupes selon leur contexte de conception, "traitement", "infertiles non traités" et "fertiles" (790, 1044 et 7661 enfants). Cinq champs ont été décrits (c...

  7. Energie du type Ginzburg-Landau avec un terme de chevillage

    OpenAIRE

    AMARI, Nassima

    2010-01-01

    L’objectif de ce travail est l’étude d’un modèle bidimensionnel de Ginzburg-Landau avec un problème de l’ancrage (pinning) des vortex. La principale difficulté en réitérant l’approche faite par F. Béthuel, H. Brézis et F. Hélein, résulte du fait que la construction de mauvais disques ne soit pas évidente. Pour surmonter cette difficulté,on remplace le minimiseur u epsilon par v epsilon U epsilon. Cette substitution nous conduit à l'étude d'une énergie classique (qui correspond à p=1). ...

  8. Tutorial de calcul poromécanique avec le logiciel Abaqus

    OpenAIRE

    Bonelli, S.

    2011-01-01

    / Ce tutorial est destiné à apprendre à réaliser avec Abaqus, sous CAE, un calcul de poroélasticité linéaire. Il est écrit de telle sorte que quelqu'un n'ayant jamais utilisé Abaqus, mais ayant des connaissances de base en mécanique des milieux poreux d'une part, et en éléments-finis d'autre part, puisse réaliser un tel calcul en partant de zéro. Toutefois, il ne s'agit en aucun cas d'un tutorial sur Abaqus ui-même, ni sur la méthode des éléments-finis.

  9. Entretien avec M. Bernard Dormy, Président du TREF, courant novembre 2017

    CERN Multimedia

    Staff Association

    2018-01-01

    M. Bernard Dormy, Président du TREF (Tripartite Employment Conditions Forum) (voir Echo n° 242) a terminé son mandat à la fin de l'année 2017. L’Association du personnel a souhaité s’entretenir avec lui sur le CERN et son personnel et, entre autres, sur le modèle de concertation. Cette publication est également l’occasion pour l’Association du personnel de saluer M. Dormy pour l’engagement dont il a fait preuve depuis 2003, année où il a débuté au TREF comme délégué français. Il faut croire que son mandat au sein de ce forum lui a particulièrement plu, puisque M. Dormy a occupé les fonctions de Vice-président du TREF de 2007 à 2011, puis de Président de 2012 à 2017. Sous sa prési...

  10. Prédictions bayésiennes de statistiques d'ordre Avec des données ...

    African Journals Online (AJOL)

    intéresse à la prédiction de statistiques d'ordre et de fonctions de celles-ci sur un échantillon futur de taille N, issu de la même loi et indépendant de l'échantillon observé. L'approche utilisée est une approche bayésienne avec une loi a priori ...

  11. Quand la relation biographique vole en éclats. Renaissances. Vivre avec Joyce, Aquin, Yourcenar de Guylaine Massoutre

    Directory of Open Access Journals (Sweden)

    Frances Fortier

    2010-12-01

    Full Text Available L’ouvrage récent de Guylaine Massoutre, Renaissances. Vivre avec Joyce, Aquin, Yourcenar présente, à la faveur d’une prose échevelée et lyrique, volontiers baroque, le parcours d’une biographe fictive, elle-même personnage d’une fiction d’Aquin, sur les traces des figures littéraires qui ont déclenché son envie d’écrire. L’étude entend montrer comment cet ouvrage joue avec finesse des ancrages générique, énonciatif, culturel et esthétique de l’exercice biographique. With the help of an unbridled and lyrical prose that is wilfully baroque, the recent work of Guylaine Massoutre, entitled Renaissances. Vivre avec Joyce, Aquin, Yourcenar, presents the course of a fictitious biographer, herself a character of an Aquinian fiction, as she follows the traces of the literary figures who inspired her desire to write. This study intends to show the way in which the work plays ingeniously upon the generic, enunciative, cultural and aesthetic foundations of the biographical endeavour.

  12. Sur le discours et l’histoire en foucault. Entretien avec Jacques Guilhaumou

    Directory of Open Access Journals (Sweden)

    Welisson Marques

    2013-08-01

    Full Text Available Dans cet entretien inédit, Jaques Guilhaumou parle sur la question du discours et de l´histoire dans la pensée de Michel Foucault en regardant telles questions à partir du belvédère de l’Analyse du Discours selon la perception française. Il commence en présentant un panorama de ses travaux plus actuels et souligne ensuite le rôle décisif de Foucault dans le établissement de une nouvelle relation entre le discours et l´histoire. Dans cette direction, il donne des détails sur quelques influences épistémologiques de la pensée foucaultienne qui viennent surtout de Nietzsche et Koselleck. Comme un grand étudiant de la pensée marxiste, Guilhaumou parle aussi sur le concept de l´ideologie et ses plusières métamorphoses conceptuelles dans autres champs jusqu´au moment de parler sur la question du pouvoir. Il parle quand même sur la problématique de l´analyse des images dans l´Analyse du Discours, une question favorable pour beaucoup des analystes du discours qui s´occupent avec le syncrétisme sémiotique des ses objets dans l´actualité. Enfin, il indique l´existence de une théorie du discours diluée dans la pensée du philosophe.

  13. Boundary layer on a flat plate with suction; Couche limite sur paroi plane poreuse avec aspiration

    Energy Technology Data Exchange (ETDEWEB)

    Favre, A; Dumas, R; Verollet, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Institut de Mecanique Statistique de la Turbulence, Faculte des Sciences de Marseille, 13 (France)

    1961-07-01

    'une plaque plane avec aspiration. La paroi poreuse s'etend sur 1 m de longueur, a partir d'une distance de 1 m en aval du bord d'attaque. Le nombre de Reynolds d'epaisseur de la couche limite en l'absence d'aspiration est de l'ordre de 16,300. Le taux d'aspiration, defini comme le rapport a la vitesse generale de la vitesse normale a la paroi, est reglable de 0 a 2 pour cent. Le gradient de pression est controlable. On a determine en diverses positions et pour divers taux d'aspiration: avec des sondes de prise de pression totale, les profils de vitesse moyenne, avec des anemometres a fils chauds, analyseur spectral et correlateur, les intensites des differentes composantes des fluctuations turbulentes de vitesse, les spectres d'energie, les correlations. On deduit de ces mesures: le trace des lignes de courant, les valeurs des tensions de frottement visqueux et turbulent, du frottement local a la paroi, et du terme de production de l'energie turbulente, ainsi que des indications sur la dissipation de cette energie. Pour ces calculs, l'equation integree de conservations de la masse dans la couche limite a ete etablie. L'influence de l'aspiration sur la couche limite est importante: elle modifie profondement la forme des profils de vitesse moyenne, augmentant les tensions de frottement visqueux a la paroi, les diminuant ailleurs; elle diminue les intensites de turbulence longitudinale et transversale ainsi que les tensions de frottement turbulent et la production d'energie turbulente. Ces effets sont tres marques dans la zone interne de la couche limite. Par contre, l'etude des spectres d'energie indique que l'echelle de la turbulence, est peu modifiee, l'epaisseur de la couche limite ne diminuant que faiblement sous l'influence de l'aspiration. Les effets de l'aspiration peuvent etre apprecies en comparant le double du taux d'aspiration au coefficient de frottement a la paroi (supposee etanche); notables des que ce rapport depasse l'unite, ils deviennent tres importants

  14. Rencontre avec la civilisation française: l’ambassade de Mehmed Efendi

    Directory of Open Access Journals (Sweden)

    Marie-Monique Bernard

    2011-11-01

    Full Text Available Resumo: A embaixada de Mehmed Efendi se apresenta como a oportunidade, para a “Sublime Porte”, para renovar as relações diplomáticas com a França, adormecidas há mais de um século. O embaixador chega a Toulon no dia 22 de novembro de 1720, segue para Paris passando por Bordeaux e pelo vale do Loire; permanecendo em Paris de 16 de março a 3 de agosto de 1721; em seguida desce para Sète, passando por Lyon. A Relação na primeira pessoa refere-se principalmente ao visual, já que a comunicação lingüística era das mais limitadas. Ela retém essencialmente realizações concretas, científicas e técnicas que suscitam a admiração: os cenários da ópera, os instrumentos de astronomia, o canal do Midi, ou a “máquina de Marly”... Tantas “maravilhas” contribuirão para a introdução da influência francesa em Constantinopla.Palavras-chave: História; França; Turquia; Mehmed Efendi.Résumé: L’ambassade de Mehmed Efendi est l’occasion, pour la Sublime Porte, de renouer, avec la France, des relations diplomatiques en sommeil depuis plus d’un siècle. L’ambassadeur arrive à Toulon le 22 novembre 1720; il gagne Paris par Bordeaux et la vallée de la Loire; il y séjourne du 16 mars au 3 août 1721; puis regagne Sète par Lyon. La Relation à la premiére personne se réfère principalment au visuel, la communication linguistique étant des plus limitées. Elle retie essentiellement des réalisations concrètes, scientifiques et techniques qui suscitent l’admiration: les décors de l’opéra, les instruments d’astronomie, le canal du Midi, ou encore la “machine de Marly”... Tant de “merveilles” contribueront à introduire l’influence française à Constantinople.Mots-clés: Histoire; France; Turquie; Mehmed Efendi.Keywords: History; France; Turkey; Mehmed Efendi.

  15. Vivre avec ou par le risque à l’île de Sein ?

    Directory of Open Access Journals (Sweden)

    Annaig Oiry

    2012-02-01

    Full Text Available L’île de Sein, située au large des côtes finistériennes, fait figure de « territoire du risque » par excellence : cette île basse est confrontée à de fréquentes et violentes tempêtes, la population vit « avec le risque » de submersion depuis des générations tout en voyant la probabilité des aléas catastrophiques augmenter en raison de la carence en aménagement et des conséquences probables du réchauffement climatique. L’image du risque, notamment les photographies de tempête, sert de support à la diffusion d’un sentiment anxiogène justifiant des actions de gestion du risque, mais entretient aussi un sentiment de fascination à l’égard des épisodes tempétueux. Cependant, les îliens portent un regard bien plus critique sur le spectaculaire véhiculé par de telles représentations. Le présent article se penche sur ces rapports entre représentations sociales du risque et iconographie du risque.This article stresses on relationships between hazard’s social representations and iconographies. As an illustration, Sein Island (located near by the Brittany coast, in Finistère. This island is considered as a symbol of natural hazard territory: indeed this low island has been confronted for decades to face significant flood hazard that is nowadays strengthened by the consequences of global warming and a lack of infrastructures. Pictures of flood hazards, and more particularly pictures of storms, are used in order to spread around the fear of natural disasters. This fear justifies the management policies implemented on the island. However islanders criticize pictures which are too spectacular and too distorted. Those gaps between hazard’s representations and iconographies are the main subjects of this article.

  16. Communication progressive du français avec 320 exercices : niveau débutant : corrigés

    CERN Document Server

    Miquel, Claire

    2013-01-01

    Ce qui fait le succès de cet ouvrage de communication: Une organisation claire: la leçon sur la page de gauche; les exercices et les activités communicatives sur la page de droite 40 fiches présentant les points généralement abordés au niveau A1 du Cadre européen commun de référence pour les langues Un apprentissage progressif: il suit la progression naturelle des méthodes de français Un usage souple: pour la classe ou en auto-apprentissage Une préparation adaptée aux certifications: un entrainement efficace pour mieux réussir aux examens A découvrir dans cette deuxième édition revue et augmentée: Un CD audio avec 69 documents sonores Un test d'évaluation avec ses corrigés Des illustrations pédagogiques acutelles et colorées 50 nouveaux exercices. Communication Progressive du français niveau débutant, 2ème édition (ISBN 978-209-038132-0).

  17. Valse avec Bachir, récit d’une mémoire effacée

    Directory of Open Access Journals (Sweden)

    Fanny Lautissier

    2009-12-01

    Full Text Available Le long-métrage d’animation Valse avec Bachir (86’, 2008, du réalisateur israélien Ari Folman est un récit semi-biographique qui revient sur une expérience individuelle de la guerre du Liban et du massacre de Sabra et Chatila. Dans son inscription entre documentaire et fiction, Valse avec Bachir donne à voir un processus qui relie, à travers l’animation, une mémoire effacée, ne se résolvant pas par l’archive, à une histoire reconstruite et figurée. Les axes de réflexion mis en valeur pour mener cette étude sont la fusion des codes du documentaire et de la fiction, les modalités du récit d’un traumatisme et l’imbrication des contextes mémoriels et historiques liés à la guerre.

  18. Recording {gamma} spectrometer with elimination of compton background; Spectrographe {gamma} enregistreur avec elimination du bruit de fond compton

    Energy Technology Data Exchange (ETDEWEB)

    Julliot, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    This instrument, derived from the recording {gamma} spectrograph, gives better definition of photoelectric peaks by elimination of pulses caused by {gamma} photons incompletely absorbed in the scintillator (Compton effect). This system uses an original method devised by Peirson: the spectrum, devoid of photoelectric peak, supplied by a detector equipped with an anthracene scintillator, is cut off from the spectrum provided by a conventional detector equipped with a Nal (T1) scintillator. The regulation of the mechanical system, detector support and source allows the detection yields to be adjusted. The electronic system is identical in presentation with that of the recording spectrograph. (author) [French] Cet appareil derive du spectrographe {gamma} enregistreur permet d'obtenir une meilleure definition des pics photoelectriques, par elimination des impulsions provenant des photons {gamma} incompletement absorbes dans le scintillateur (effet Compton). Cet ensemble met en oeuvre une methode originale due a Peirson: le spectre, depourvu de pic photoelectrique, fourni par un detecteur, equipe avec un scintillateur d'anthracene, est retranche du spectre donne par un detecteur classique, equipe avec un scintillateur de NaI (T1). Le reglage de l'ensemble mecanique, support des detecteurs et de la source, permet d'ajuster les rendements de detection. L'ensemble electronique se presente sous un aspect identique a celui du spectrographe enregistreur. (auteur)

  19. Créer avec SketchUp 16 projets, de l'architecture au théâtre

    CERN Document Server

    2009-01-01

    Grâce à SketchUp, la 3D n'est plus l'apanage des seuls programmes de CAO spécialisés. Plus besoin d investir des milliers d euros en logiciels et en matériel informatique haut de gamme ! Les concepteurs comme le grand public disposent maintenant d un outil efficace, rapide et intuitif pour modéliser en trois dimensions le fruit de leur imagination. Cet ouvrage, à l'approche originale et concrète, vous dispense des conseils pour acquérir de bonnes pratiques d'utilisation de SketchUp, manier ses fonctions avancées et le faire collaborer avec d'autres logiciels. Il présente un tour d horizon de SketchUp et 16 cas d'utilisation professionnelle réels, couvrant une vaste gamme de métiers, de l'architecture à la menuiserie en passant par le graphisme, la scénographie, la géologie, l'ingénierie ou l'infographie. Chaque auteur partage avec vous ses méthodes et astuces, issues de sa pratique professionnelle, qui vous permettront de gagner du temps et de dépasser les limites apparentes parfois rencon...

  20. Prépositions et rection verbale étude des prépositions avec, contre, en, par, parmi, pour

    CERN Document Server

    Ashino, Fumitake; Paillard, Denis

    2017-01-01

    Cet ouvrage étudie une série de prépositions du français (avec, contre, par, parmi, en et pour) dont la caractéristique commune est d'introduire un terme (Y) constituant un mode d'appréhension particulier du terme (X) avec lequel ces prépositions établissent une relation (X prép Y), et dont un grand nombre d'emplois sont liés à la rection verbale.

  1. Le système de l'harmonie de Rameau dans sa correspondance avec d'Alembert et Rousseau

    Directory of Open Access Journals (Sweden)

    Stefanović Ana M.

    2002-01-01

    Full Text Available (francuski L'article examine la correspondance polémique de Rameau avec d'Alembert et Rousseau, entretenue dans la sixième décénie du XVIIIe siècle. Le système de l'harmonie de Rameau y est affronté à deux défis contradictoires: d'un côté, à la provocation d'absolutisation du système venant de son intériorité-même, et de l'autre, à une nouvelle conception de l'autonomie musicale, conçue sur le geste anarchique et destructif envers lui. Tandis que, de la polémique avec d'Alembert, le système vient de ressortir assuré et renforcé, soutenant la suprématie de la musique dans le champ théorique, la polémique avec Rousseau démontre que l'autonomie scientifique n'entraîne pas de soi l'isolation de la musique dans le domaine esthétique. Fondé sur le réseau cohérent de ses propres règles, le système musical est apte de se plier, de se modifier sous l'influence de ce qui lui est "extérieur": du sens contenu dans des énoncés linguistiques. L'idée de représentation musicale est alors modifiée dans la direction d'une réconcilliation possible de la raison (cartésienne et de l'imagination créatrice, du général et du particulier, de la norme et de l'individualité, dans la mesure où le système musical devenant analogue au système linguistique, en tant que "langue en action" participe chaque fois dans l'événement de sa propre création.

  2. « Faire clair et vif avec des éléments complexes »

    Directory of Open Access Journals (Sweden)

    Cordula Reichart

    2010-12-01

    Full Text Available Avec le roman Salammbô et le conte Hérodias, Flaubert se tourne vers l’Antiquité préchrétienne afin de montrer à la modernité, sur le mode « clair et vif », sa complexité, son implication dans des discours de pouvoir religieux et historiographiques. C’est en se penchant sur les sources historiographiques et bibliques que Flaubert décline les stratégies d’exclusion et de surécriture, mettant au jour ce qu’elles refoulent, non pas sous forme de signification alternative, explicite, mais en tant que défiguration, réalisation littérale des corps et des signes.Avec Salammbô, Flaubert écrit une histoire du salut. Carthage, représentée dès le début par la protagoniste Salammbô en tant que pars pro toto, expose les figures cachées de Rome, à laquelle est liée, aussi et surtout, la promesse chrétienne de salut. Dans le nom de Salammbô Flaubert réécrit l’origine de cette figure en fait associée à la Rome chrétienne en s’appuyant sur l’exemple de l’histoire antique de Carthage.Dans Hérodias, Flaubert reprend le thème du triomphe de l’Orient annoncé par Renan et redouté par l’Église catholique. Un danger, pourrait-on dire, qui se réalise dans la figure d’Hérodias et qui est conjuré avec la décapitation de Jean. Dans son rapport inversé avec les textes de référence, Hérodias démasque les ambitions et la volonté hégémonique du modèle de pouvoir propre à l’Église en Orient. La translatio de l’empire romain est radicalisée au moyen de la figure d’Aulus. Aulus peut faire l’objet d’une lecture performative en tant que début et fondement de l’histoire française du salut comme histoire romaine de la perversion.In the novel Salammbô and the short story Hérodias, Flaubert turns to pre-Christian antiquity in order to present modernity its complexity, its entwinement in religious and historiographical discourses of power, in a « clair et vif » manner. In Salammb

  3. En géographie, comme en science, l'original est lié avec l'originaire

    Directory of Open Access Journals (Sweden)

    Iosif Daniel

    2017-12-01

    Full Text Available De nos jours, les scientifiques doivent garder un relativisme intellectuel, combiné avec une plus forte relation des idées. On ne doit pas s’accrocher { une définition, { une terminologie sèche. Kierkegaard disait que le désir d’éviter les définitions c’est une preuve de tact. On ne doit pas s’esquiver de créer de nouvelles dimensions et nouvelles perspectives ; et, surtout, on ne doit pas oublier que l’original provient, indubitablement, de l’originaire aussi. La revue Cinq Continents encourage de telles perspectives et représente un lieu de la liberté de la pensée géographique.

  4. Du neuf dans les relations de l'Église orthodoxe avec les autres chrétiens

    OpenAIRE

    Famerée, Joseph

    2015-01-01

    Cette note évoque quatre réunions scientifiques (Athènes, Chambésy, Thessalonique, Iasi) qui, coup sur coup, de mai 2013 à mai 2014, ont permis à des Orthodoxes d’échanger avec d’autres chrétiens, catholiques notamment, sur des sujets théologiques et œcuméniques importants pour l’évolution des différentes Églises. Une nouvelle génération de théologiens orthodoxes se lève, osant parler librement à propos de leur Église et montrer l’écart entre l’Orthodoxie idéale et l’Orthodoxie réelle, spécia...

  5. Pompe de chaleur fonctionnant avec un mélange de fluides Heat Pump Operating with a Fluid Mixture

    Directory of Open Access Journals (Sweden)

    Vidal J.

    2006-11-01

    Full Text Available Lorsqu'une pompe de chaleur échange de la chaleur avec des fluides extérieurs, dont la température évolue au cours de l'échange, il est possible d'augmenter le coefficient de performance en utilisant comme fluide de travail un mélange non-azéotropique qui se vaporise et se condense suivant une évolution de température parallèle à celle du fluide extérieur avec lequel s'effectue cet échange. L'utilisation de mélanges dans les pompes de chaleur a été étudiée, d'une part, au moyen de modèles de simulation sur ordinateur et, d'autre part, au moyen d'essais expérimentaux. Différentes applications ont été examinées à la fois dans le domaine du chauffage résidentiel et dans le domaine industriel. Whenever heat is recovered and delivered, the coefficient of performance of a heat pump can be increased by using a fluid mixture selected to have a temperature variation, during the vaporization and condensation stages, parallel to that of the outside fluid with which the heat exchange takes place. Such a solution was investigated both theoretically and experimentally. It has been shown that significant savings can be expected, ranging up to 50% of the energy consumption of conventional heat pumps in some cases. Various applications for home and industrial heating have been examined, and the economic prospects have been found to be satisfactory. Further work is needed to develop such heat pumps on a commercial basis.

  6. Irreducible Specht modules are signed Young modules

    OpenAIRE

    Hemmer, David J.

    2005-01-01

    Recently Donkin defined signed Young modules as a simultaneous generalization of Young and twisted Young modules for the symmetric group. We show that in odd characteristic, if a Specht module $S^\\lambda$ is irreducible, then $S^\\lambda$ is a signed Young module. Thus the set of irreducible Specht modules coincides with the set of irreducible signed Young modules. This provides evidence for our conjecture that the signed Young modules are precisely the class of indecomposable self-dual module...

  7. Study of some continuous spectra produced by nuclear reactions with light nuclei; Etude de quelques spectres continus produits par reactions nucleaires avec des noyaux legers

    Energy Technology Data Exchange (ETDEWEB)

    Marquez, L

    1966-07-01

    The continuous spectra coming from several nuclear reactions with light nuclei were measured. The spectra can be explained by a two-step reaction mechanism; however, the reactions produced by {sup 6}Li are different. A mechanism was proposed to explain their spectra based on the following assumptions: {sup 6}Li makes a nuclear molecule with the target which subsequently breaks up in such a way that an {alpha} particle comes out with the kinetic energy that it has in the molecule. The calculated spectra and those measured are in good agreement. (author) [French] Nous avons mesure les spectres continus produits dans plusieurs reactions nucleaires avec des noyaux legers. A l'exception des spectres produits par {sup 6}Li, on a trouve qu'on pouvait expliquer ces spectres par le mecanisme des reactions en deux etapes. Nous avons propose un mecanisme pour expliquer les spectres produits par {sup 6}Li. On suppose que {sup 6}Li forme une molecule nucleaire avec la cible qui eclate ensuite de facon telle qu'une particule alpha de la molecule sort avec l'energie cinetique de son mouvement propre dans la molecule. Les spectres calcules avec ces hypotheses et les spectres mesures sont en bon accord. (auteur)

  8. Comparaison des conduites discursives de mères et d’enseignants dans la co-construction de récits avec des enfants

    Directory of Open Access Journals (Sweden)

    Vinel Elise

    2014-07-01

    Full Text Available Cette communication s’intéresse aux conduites discursives produites par des mères et des enseignants au cours de deux lectures conjointes d’album avec des enfants. Elle s’inscrit dans une approche dialogique et interactionniste du langage. Dans la suite des travaux de Florin (1991, Grossmann (1996, analysant les styles d’interaction des enseignants et de réception des enfants en cours de lecture, mais aussi de ceux de Vygotski (1984, Bruner (1994 ou encore Salazar Orvig et De Weck (2014, nous cherchons à comprendre de quelles manières les adultes racontent des histoires aux enfants et à quelles expériences spécifiques des récits ceux-ci sont confrontés. Dix enfants âgés de 3 à 5 ans ont été filmés au cours de ces séances de lectures d’albums, sans texte et avec texte, avec un de leur parent à leur domicile et avec des pairs et des enseignants à l’école.

  9. Some ways for the investigation of the solar modulation of cosmic electrons; Moyens d'etude de la modulation solaire des electrons cosmiques

    Energy Technology Data Exchange (ETDEWEB)

    Mercier, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    In this report, we are investigating the solar modulation of cosmic electrons, in different ways. By comparing the calculated intensity with the measured intensity of positrons, we can evaluate the solar modulation of positrons, hence the modulation of negatons, since the modulation of negatons is probably the same that for positrons. By comparing the electron spectrum in interstellar space needed to explain the galactic background radio emission with that observed near the earth, we can deduce information about the modulation of electrons. We can investigate the modulation through the observation of its variations during the solar cycle. This different ways lead us to compatible results. In spite of the fact that the precision of the experimental data is poor, the modulation can be represented by: a constant or a form in exp(- K/Ro{beta}) under the rigidity Ro {approx_equal} 0,5 BV; a form in exp(- K/R) or exp(- K/R{beta}) above this rigidity. In addition, the investigation of both electrons and protons displays that the diffusion-convection theory is inadequate to explain all the features of the solar modulation. (author) [French] Dans le present rapport, nous etudions la modulation solaire des electrons cosmiques a l'aide de plusieurs methodes. Par comparaison entre l'intensite calculee et l'intensite mesuree des positons, on peut evaluer la modulation solaire des positons, et aussi des negatons, puisque la modulation des negatons est probablement la meme que celle des positons. Par le calcul, a partir du bruit de fond radio, du flux des electrons a l'exterieur du systeme solaire et sa confrontation avec le flux observe a l'orbite de la Terre permet l'etude de la modulation solaire des electrons. On peut aussi analyser ce phenomene de modulation pour l'etude de ses variations au cours du cycle solaire. Ces diverses methodes donnent des resultats compatibles. En depit de la precision mediocre des donnees experimentales, on peut caracteriser la modulation par: une

  10. Signed Young Modules and Simple Specht Modules

    OpenAIRE

    Danz, Susanne; Lim, Kay Jin

    2015-01-01

    By a result of Hemmer, every simple Specht module of a finite symmetric group over a field of odd characteristic is a signed Young module. While Specht modules are parametrized by partitions, indecomposable signed Young modules are parametrized by certain pairs of partitions. The main result of this article establishes the signed Young module labels of simple Specht modules. Along the way we prove a number of results concerning indecomposable signed Young modules that are of independent inter...

  11. Memory Modulation

    NARCIS (Netherlands)

    Roozendaal, Benno; McGaugh, James L.

    2011-01-01

    Our memories are not all created equally strong: Some experiences are well remembered while others are remembered poorly, if at all. Research on memory modulation investigates the neurobiological processes and systems that contribute to such differences in the strength of our memories. Extensive

  12. Module descriptor

    DEFF Research Database (Denmark)

    Vincenti, Gordon; Klausen, Bodil; Kjær Jensen, Jesper

    2016-01-01

    The Module Descriptor including a Teacher’s Guide explains and describes how to work innovatively and co-creatively with wicked problems and young people. The descriptor shows how interested educators and lecturers in Europe can copy the lessons of the Erasmus+ project HIP when teaching their own...

  13. Silence et divulgation dans des familles d’adolescents vivant avec le VIH depuis la naissance : une exploration qualitative

    Science.gov (United States)

    Proulx-Boucher, Karène; Blais, Martin; Fernet, Mylène; Richard, Marie-Ève; Otis, Joanne; Josy Lévy, Joseph; Samson, Johanne; Lapointe, Normand; Morin, Guylaine; Thériault, Jocelyne; Trottier, Germain

    2011-01-01

    OBJECTIF : Les études ciblant les enfants nés avec le VIH se sont principalement intéressées à la période précédant l’annonce du diagnostic à l’enfant. L’objectif de cette étude est d’explorer les dynamiques de communication intrafamiliale suivant l’annonce du diagnostic. MÉTHODOLOGIE : Vingt-neuf jeunes (de dix à 18 ans) vivant avec le VIH depuis la naissance ont accordé des entrevues individuelles semi-dirigées portant sur : 1) le dévoilement du statut sérologique, 2) leurs relations familiales et 3) l’éducation sexuelle en milieu familial. Les témoignages ont fait l’objet d’une analyse de contenu. RÉSULTATS : Les jeunes ont appris en moyenne à l’âge de 11 ans leur diagnostic VIH+. La dynamique qui s’installe après cette annonce apparaît régie par le silence : les échanges qui s’ensuivent portent en majorité sur des questions relatives à la médication et à la prévention d’une transmission sexuelle du virus. Ce silence préserverait l’équilibre familial en occupant trois fonctions : protéger la mère d’un sentiment de culpabilité à l’égard de la transmission, assurer l’harmonie familiale, se sentir normal face aux autres. Le diagnostic de l’adolescent n’est généralement pas révélé à la famille élargie, préservant ainsi leur intégration au sein de la famille en les protégeant du rejet, de la trahison et du jugement. EXPOSÉ : Les fonctions du silence et du secret occupent une place stabilisatrice importante au sein de la famille. Toutefois, elles contribuent à isoler les adolescents d’une forme de soutien affectif dont ils ont pourtant besoin. Des pistes d’intervention sont suggérées. PMID:22851894

  14. Guide du calcul avec les logiciels libres XCAS, Scilab, Bc, Gp, GnuPlot, Maxima, MuPAD

    CERN Document Server

    Connan, Guillaume

    2008-01-01

    Le Guide du Calcul avec les logiciels libres vous propose de maîtriser les bases de plusieurs logiciels gratuits de calcul formel et numérique, et de géométrie dynamique : XCAS, Scilab, Bc, Gp, GnuPlot, Maxima, Octave, Yacas, et également MuPAD (non libre). Ces logiciels sont multiplateformes (Windows, Mac, Linux) et s'installent rapidement. La grande originalité de cet ouvrage est de détailler pas à pas l'utilisation de plusieurs logiciels pour plusieurs types de calcul. Il propose ainsi des applications en mathématiques, en physique et en sciences de l'ingénieur (par exemple : équations différentielles utilisées en physique, traitement du son...). Il vous aidera à savoir utiliser le bon logiciel au bon moment pour résoudre le bon problème. Cet ouvrage s'adresse à toute personne voulant utiliser le calcul en mathématiques à l'aide de logiciels libres : étudiants en mathématiques ou en informatique, professeurs de lycée souhaitant utiliser ces outils dans le cadre de leur cours et jusqu'...

  15. Grammaire progressive du français corrigés : niveau intermédiaire : avec 680 exercices

    CERN Document Server

    Thiévenaz, Odile

    2013-01-01

    Les corrigés de la 3e édition de la Grammaire progressive du français - niveau intermédiaire Ce qui fait le succès de cette grammaire : Une organisation claire : la leçon de grammaire sur la page de gauche ; les exercices d'entraînement sur la page de droite ; 52 chapitres présentant les points généralement abordés aux niveaux A2 et B1 du Cadre européen commun de référence pour les langues ; Un apprentissage progressif : il suit la progression naturelle des méthodes de français ; Un usage souple : pour la classe ou en auto-apprentissage ; Une préparation adaptée aux certifications : un entraînement efficace pour mieux réussir aux examens ; Une large place faite à l'évaluation : de nombreux exercices de révision et des bilans réguliers. À découvrir dans cette troisième édition tout en couleurs (ISBN 978 209 038 124 5) : Un CD audio avec 14 documents sonores ; 80 nouveaux exercices et activités communicatives ; Des chapitres révisés et des exercices plus variés ; Un test d'�...

  16. L’ÉCOLE SOCIOLOGIQUE DE CRAIOVA: UNE ÉCOLE «JEUNE» AVEC UN ESPRIT «GUSTIEN»

    Directory of Open Access Journals (Sweden)

    Soufyane BADRAOUI

    2015-04-01

    Full Text Available La sociologie à Craiova étant une spécialité en matière d’offres de formation dans les trois cycles de l'enseignement supérieur: licence, master et doctorat, elle est aussi une pratique, ayant plus de 19 ans d'activité et d'expérience. Le nombre de projets de recherches doctorales et poste doctoraux réalisé et en cours de réalisation, justifie sa notoriété et de son appellation «L'école Sociologique de Craiova», notamment avec des partenaires pratiquant une sociologie d'action telle que l'Académie Roumaine et l'Institut Social Olténie. L'école sociologique de Craiova fait revivre la tradition sociologique roumaine et continue dans la lignée de la tradition de l'école Gustiènne. Il faut également noter que l'orientation des recherches sociologiques «Craiovienne» a pour objectif d'assurer un équilibre entre l'approche fondamentale et la recherche action. Dans ce qui suit, nous présenterons l’école sociologique de Craiova en mettant l’accent sur son fondateur, ses préoccupations, la recherche etc.

  17. Dimensionnement d’un actionneur pour organe de pilotage à entraînement direct avec redondance passive magnétique

    OpenAIRE

    Allias, Jean-François

    2015-01-01

    Ce manuscrit de thèse, intitulé " Dimensionnement d’un actionneur pour organe de pilotage à entraînement direct avec redondance passive magnétique ", s’inscrit dans un projet ANR du nom de TEMOP pour, TEchnologie Mécatronique pour Organe de Pilotage, en lien avec la société UTC Aerospace de Figeac. L’objectif de cette thèse est de développer une solution de machine électrique permettant de générer le retour d’effort actif d’un mini-manche latéral d’aéronef, dans le but d’améliorer les sensati...

  18. Detection of an intense polychromatic gamma beam modulated at 3000 MHz; Detection d'un faisceau intense de gammas polychromatiques module a 3000 MHz

    Energy Technology Data Exchange (ETDEWEB)

    Beil, H; Veyssiere, A; Daujat, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-07-01

    This paper presents two methods of detection of a {gamma} beam modulated at very high frequencies. The intense modulated beam is created by means of Bremsstrahlung in a gold-target, the latter having been placed in the emerging electron beam of the Linac at Saclay. A tentative interpretation of the physical phenomena involved in the detection processes is also given. The empirical data agree reasonably well with numerical evaluations based on well established theoretical concepts concerning these phenomena. (authors) [French] Cet article presente deux facons de detecter un faisceau de {gamma} module a haute frequence. Le faisceau intense de {gamma} est cree par l'impact d'electrons (acceleres dans un accelerateur lineaire) sur une cible en or. Une tentative d'interpretation des phenomenes physiques mis en cause dans le processus de detection est donnee et les valeurs experimentales trouvees s'accordent raisonnablement bien avec les valeurs calculees a partir des considerations theoriques des phenomenes. (auteurs)

  19. Etude de pratiques d'enseignement relatives a la modelisation en sciences et technologies avec des enseignants du secondaire

    Science.gov (United States)

    Aurousseau, Emmanuelle

    Les modeles sont des outils amplement utilises en sciences et technologies (S&T) afin de representer et d’expliquer un phenomene difficilement accessible, voire abstrait. La demarche de modelisation est presentee de maniere explicite dans le programme de formation de l’ecole quebecoise (PFEQ), notamment au 2eme cycle du secondaire (Quebec. Ministere de l'Education du Loisir et du Sport, 2007a). Elle fait ainsi partie des sept demarches auxquelles eleves et enseignants sont censes recourir. Cependant, de nombreuses recherches mettent en avant la difficulte des enseignants a structurer leurs pratiques d’enseignement autour des modeles et de la demarche de modelisation qui sont pourtant reconnus comme indispensables. En effet, les modeles favorisent la conciliation des champs concrets et abstraits entre lesquels le scientifique, meme en herbe, effectue des allers-retours afin de concilier le champ experimental de reference qu’il manipule et observe au champ theorique relie qu’il construit. L’objectif de cette recherche est donc de comprendre comment les modeles et la demarche de modelisation contribuent a faciliter l’articulation du concret et de l’abstrait dans l’enseignement des sciences et des technologies (S&T) au 2eme cycle du secondaire. Pour repondre a cette question, nous avons travaille avec les enseignants dans une perspective collaborative lors de groupes focalises et d’observation en classe. Ces dispositifs ont permis d’examiner les pratiques d’enseignement que quatre enseignants mettent en oeuvre en utilisant des modeles et des demarches de modelisation. L’analyse des pratiques d’enseignement et des ajustements que les enseignants envisagent dans leur pratique nous permet de degager des connaissances a la fois pour la recherche et pour la pratique des enseignants, au regard de l’utilisation des modeles et de la demarche de modelisation en S&T au secondaire.

  20. Les carcinomes epidermoïdes du scrotum: à propos de 7 cas avec revue de la litterature

    Science.gov (United States)

    Halfya, Ayoub; Elmortaji, Khalid; Redouane, Rabii; fethi, Meziane; Rafik, Amine; Mohamed, Ezzoubi; Abdessamad, Chlihi

    2015-01-01

    Quoique rare le carcinome épidermoïde du scrotum a un mauvais pronostic. Les Carcinomes du scrotum induite et - liées au travail sont moins fréquentes en raison d'une meilleure hygiène, vêtements de protection, et la sensibilisation de la cancérogénicité des huiles industrielles. L’épidémie à l'HPV a induit une augmentation de l'incidence. Le traitement de dépend toujours exérèse locale de la lésion primaire. La radiothérapie a peu de bénéfice thérapeutique dans le traitement d'un carcinome épidermoïde du scrotum. La bléomycine peut être utile comme traitement adjuvant pour les maladies ilio-inguinal généralisée avant la tentative exérèse, même si cela n'a pas encore été prouvé. Entre janvier 2011 au 1er janvier 2013, 7 patients atteints de carcinome épidermoïde ont été pris en charge, Trois patients ont présenté une localisation ganglionnaire. Les sept patients ont eu un traitement chirurgical par exérèse large avec reconstruction, Deux patients ont été adressé pour chimiothérapie.2 patients ont présenté une récidive, dont un est décédé. PMID:26113906

  1. MEMORY MODULATION

    Science.gov (United States)

    Roozendaal, Benno; McGaugh, James L.

    2011-01-01

    Our memories are not all created equally strong: Some experiences are well remembered while others are remembered poorly, if at all. Research on memory modulation investigates the neurobiological processes and systems that contribute to such differences in the strength of our memories. Extensive evidence from both animal and human research indicates that emotionally significant experiences activate hormonal and brain systems that regulate the consolidation of newly acquired memories. These effects are integrated through noradrenergic activation of the basolateral amygdala which regulates memory consolidation via interactions with many other brain regions involved in consolidating memories of recent experiences. Modulatory systems not only influence neurobiological processes underlying the consolidation of new information, but also affect other mnemonic processes, including memory extinction, memory recall and working memory. In contrast to their enhancing effects on consolidation, adrenal stress hormones impair memory retrieval and working memory. Such effects, as with memory consolidation, require noradrenergic activation of the basolateral amygdala and interactions with other brain regions. PMID:22122145

  2. Entretien avec Marian Pankowski

    Directory of Open Access Journals (Sweden)

    Dorota Walczak

    2008-10-01

    Full Text Available PrésentationMarian Pankowski est né le 9 novembre 1919 à Sanok, dans les Carpates polonaises. Fils d’un métallurgiste, il a passé son enfance et son adolescence dans sa ville natale, une petite bourgade habitée par des Polonais, des Juifs et des Ukrainiens. La guerre interrompit ses études de philologie à l’Université de Cracovie. Il prit part aux combats de l’armée polonaise. Arrêté en 1942 pour faits de résistance, il fut envoyé à Auschwitz. Transféré dans différents camps, la Libération le...

  3. Entretien avec Serge Gruzinski

    OpenAIRE

    Jeanne, Boris

    2008-01-01

    Serge Gruzinski est archiviste-paléographe et directeur d’études à l’EHESS. À l’École française de Rome et à la Casa de Velázquez, mais surtout au Mexique, de 1976 à 1984, il a travaillé sur des sources lui permettant d’aborder la réaction des Indiens face à la conquête espagnole (La colonisation de l’imaginaire ; La guerre des images), le mélange des formes et des styles entre les éléments de culture précolombienne et ceux de l’Europe de la Renaissance (L’Amérique de la conquête peinte par l...

  4. Entretiens avec Tanguy Viel

    Directory of Open Access Journals (Sweden)

    Stephan Nowotnick

    2016-11-01

    Full Text Available Ausgehend vom Thema, zu dem Tanguy Viel im November 2015 an die Bergische Universität Wuppertal eingeladen wurde: "Un auteur français sur les pistes du roman américain", entwickelt der Autor in einem einleitenden Vortrag seine Ideen zur Intertextualität und zur Intermedialität, kommentiert eingehend seine schriftstellerische Entwicklung, die Entfaltung seines narrativen Werkes sowie den eigenen Schreibprozess. In der sich anschließenden Diskussion, in der sich Tanguy Viel mit Fragen aus dem Publikum auseinandersetzt, geht der Autor detailliert auf seine literarische Verpflichtungen, die Ästhetik und metanarrative Dimension seiner Texte und sein Verhältnis zum Leser ein. Auch die Bedeutung des Verlags Editions de Minuit als Sammelbecken einer bestimmten Ausprägung der literarischen Avantgarde in Frankreich wird beleuchtet. In der Summe eignet sich die Wiedergabe dieser "rencontre littéraire" sehr gut, um sich ein authentisches Bild von dem literarischen Selbstverständnis eines bedeutenden Autors der französischen Gegenwartsliteratur zu machen.

  5. Entretien avec Felix Berger

    OpenAIRE

    Jaques, Pierre-Emmanuel; Porret, Marthe

    2016-01-01

    Fondée et établie à Rochester, dans l’Etat de New York, Eastman Kodak Company est une des plus importantes entreprises au monde à être active dans le domaine de la pellicule. Kodak SA, sa filiale suisse, a été fondée en 1910 à Lausanne, avant de s’installer définitivement à Renens. Felix Berger, responsable du département Entertainment Imaging, est chef de vente chez Kodak, Renens. Après un apprentissage de droguiste, Felix Berger effectue un stage chez Kodak, désireux de parfaire ses connais...

  6. Rencontres avec Philippe Soupault

    OpenAIRE

    Lance, Alain

    2017-01-01

    J’ai découvert Philippe Soupault en écoutant, vers la fin des années cinquante, ses émissions radiophoniques sur la poésie, l’une s’appelait Poètes à vos luths, l’autre Poètes oubliés, amis inconnus. C’était une période où, en l’espace de quelques mois, des lectures m’ouvraient des horizons nouveaux, je passais de Baudelaire et Laforgue à Apollinaire et Philippe Soupault lui-même. J’ai acheté le volume de couleur jaune qu’Henri-Jacques Dupuy lui avait consacré dans la collection « Poètes d’au...

  7. : Entretien avec Graig CALHOUN

    OpenAIRE

    CALHOUN, Craig; De Pablo, Elisabeth; STOCKINGER, Peter; Legrand, Valérie; Sylvestre, Isabelle; BASTIN, Louis

    2011-01-01

    Confronting upheavals in the global economy, the prominence of global political conflicts, the global risks created by environmental damage, and the new connections forged through global media and migrations, many recognize the need for renewal of social solidarity. How do we imagine cohabitation and ideally cooperation on large-scales, at long distances, and with deep differences? This question is pressed on us by our embeddedness in impersonal systems like the global economy, the prominence...

  8. Entretien avec Fabien Hennion

    Directory of Open Access Journals (Sweden)

    Maria Gravari-Barbas

    2012-02-01

    Full Text Available Après un premier poste dans Cabinet d’études (Détente Consultants, Fabien Hennion est, depuis 2010, chargé de mission à l’Union Départementale des Offices de Tourisme et Syndicats d’Initiative du Nord (UDOTSI. - Maris Gravari-Barbas (MGB, Sébastien Jacquot (SJ. Quel cheminement vous a-t-il permis de passer des études de géographie au tourisme ?- Fabien Hennion (FH. Après l’obtention de mon baccalauréat scientifique je me suis tourné vers la géographie, le développement et l’aménagement d...

  9. Entretien avec Maja Wolny

    Directory of Open Access Journals (Sweden)

    Eric Metz

    2010-02-01

    Full Text Available PrésentationParmi les bâtisseurs de ponts culturels entre la Belgique et le monde slave, la jeune Polonaise Maja Wolny (née en 1976 occupe aujourd’hui une place proéminente. Après ses études de philologie polonaise, de journalisme et de « cultural management » à Cracovie, Varsovie, Bruxelles et Delft, elle travailla de 1998 à 2002 comme journaliste pour la rubrique culturelle de la revue polonaise « Polityka ». En 2003 elle s’installa à Gand, où elle fondit Post Viadrina, la plus importante ...

  10. Contraintes de taille dans les mots composés : quand la phonologie entre en concurrence avec les contraintes morphologiques

    Directory of Open Access Journals (Sweden)

    Villoing Florence

    2012-07-01

    Full Text Available Cette communication porte sur les contraintes phonologiques qui pèsent sur la formation des mots construits dans le cadre théorique de la morphologie lexématique (Anderson 1992, Aronoff 1994, Fradin 2003. En étudiant les données du français, les travaux de Lignon (à paraître, Plénat (2009 & Roché (2003 ont montré que des contraintes de taille étaient à l’œuvre dans plusieurs constructions morphologiques. L’objectif de cet article est d’étudier cette hypothèse sur les mots composés Verbe-Nom du français (Villoing 2009. L’analyse quantitative des données du corpus montre clairement que les verbes des mots composés VN du français sont soumis à des contraintes de taille et doivent répondre au format d’un monosyllabe. La contrainte pèse moins lourdement sur les noms qui parviennent à s’imposer plus facilement que les verbes avec une taille supérieure. Cependant, la majorité des mots composés VN tend à ne pas dépasser trois syllabes (leur format optimal étant de deux ou trois syllabes, révélant ainsi l'influence des contraintes de taille sur le mot composé lui-même. La mise au jour de ces contraintes permet d'expliquer l’absence de certains verbes dans le corpus de composés VN, répondant pourtant bien aux propriétés sémantiques attendues : les verbes construits par affixation (absence de suffixés en -iser, -ifier; très rares cas de préfixés, les verbes du 2ème groupe, les verbes de taille supérieure à trois syllabes. En outre, cet article met au jour un cas de concurrence entre contrainte morphologique et contrainte phonologique au sein d'une construction morphologique, et montre comment la première l'emporte sur la dernière, bien que la contrainte phonologique contraigne fortement le choix du verbe et du nom de base. Il donne également à voir comment la contrainte phonologique parvient néanmoins à influencer le choix de bases sémantiquement peu conformes aux attentes de la règle.

  11. Le concept de « configuration » et ses implications empiriques : Elias avec et contre Weber

    Directory of Open Access Journals (Sweden)

    André Ducret

    2011-04-01

    Full Text Available Comment se fait-il que Norbert Elias ait autant cherché à prendre ses distances avec la conception de la sociologie que se faisait Max Weber alors que leurs démarches paraissent si proches ? On évaluera d’abord la portée des arguments avancés contre ce « bourgeois libéral » que serait demeuré le second. Puis on en dégagera les implications empiriques à partir d’extraits choisis dans l’œuvre du premier. On s’arrêtera enfin sur la démarche dite « synoptique » que Norbert Elias propose à tout sociologue d’adopter. En fin de compte, il apparaîtra que ce dernier défend une approche relationnelle de la contrainte sociale que n’aurait pas désavouée Max Weber.The notion of « configuration » and its empirical implications: Elias with or against WeberWhy is it that Norbert Elias went to such lengths to distance himself from Max Weber’s conception of sociology whilst their respective approaches seem so close? I will first evaluate the relevance of his arguments against the “liberal bourgeois” that Weber was to the end. I will then bring out the empirical implications from a number of extracts selected from his works. I will conclude by examining his “synoptic” approach, one to be followed by all sociologists. All things considered, it appears that Elias defends a relational approach of social constraint that Max Weber would not have disowned.El concepto de « configuración » y sus consecuencias empíricas: ¿Es Norbert Elias partidario o opuesto a  Weber?¿Como es posible que Norbert Elias haya tomado tanto la distancia con respecto a la visión sociológica de Max Weber a pesar de que su propia concepción se le asemeje mucho? Evaluaremos en primer lugar el alcance de los argumentos dirigidos del primero contra el «burgués liberal». Seguidamente subrayaremos las implicaciones empíricas a partir de citas escogidas de los escritos de Elias. Finalmente haremos hincapié en el encaminamiento

  12. Fast Convolution Module (Fast Convolution Module)

    National Research Council Canada - National Science Library

    Bierens, L

    1997-01-01

    This report describes the design and realisation of a real-time range azimuth compression module, the so-called 'Fast Convolution Module', based on the fast convolution algorithm developed at TNO-FEL...

  13. Les représentations du VIH, des personnes vivant avec le VIH et des soins dans les manuels en soins infirmiers : une analyse qualitative de contenu

    Directory of Open Access Journals (Sweden)

    Stephany Cator

    2018-03-01

    Full Text Available Depuis la découverte du virus, les manuels en soins infirmiers incluent la notion de VIH/sida pour qu’elle soit transmise dans la formation de premier cycle. Cependant, les écrits dévoilent l’existence d’un écart entre cette formation et les compétences requises pour prodiguer des soins aux personnes vivant avec le VIH. Conscientes des lacunes de la formation initiale en VIH/sida et qui, à ce jour, n’ont pas été explorées dans les manuels, nous avons réalisé une analyse qualitative de contenu de 18 manuels de médecine-chirurgie. Les résultats de cette étude ont dévoilé trois catégories : les représentations du VIH, des personnes vivant avec le VIH et des soins. La première catégorie renvoie à la façon dont on raconte l’histoire du VIH et parle du virus ainsi que la façon dont on décrit la maladie et conceptualise la transmission. La deuxième correspond aux personnes qui sont à risque de contracter le VIH, qui vivent avec le VIH et à la façon dont on les représente. La troisième réfère à la représentation des types de soins, leurs objectifs et les enjeux qui y sont associés.

  14. Module theory, extending modules and generalizations

    CERN Document Server

    Tercan, Adnan

    2016-01-01

    The main focus of this monograph is to offer a comprehensive presentation of known and new results on various generalizations of CS-modules and CS-rings. Extending (or CS) modules are generalizations of injective (and also semisimple or uniform) modules. While the theory of CS-modules is well documented in monographs and textbooks, results on generalized forms of the CS property as well as dual notions are far less present in the literature. With their work the authors provide a solid background to module theory, accessible to anyone familiar with basic abstract algebra. The focus of the book is on direct sums of CS-modules and classes of modules related to CS-modules, such as relative (injective) ejective modules, (quasi) continuous modules, and lifting modules. In particular, matrix CS-rings are studied and clear proofs of fundamental decomposition results on CS-modules over commutative domains are given, thus complementing existing monographs in this area. Open problems round out the work and establish the...

  15. Sartre et sa théorie des émotions : une confrontation avec Erving Goffman

    Directory of Open Access Journals (Sweden)

    Claude Javeau

    2010-06-01

    Full Text Available L’auteur confronte les positions de Jean-Paul Sartre et Erving Goffman. Dans son ouvrage de 1938, Esquisse d’une théorie des émotions, Jean-Paul Sartre propose une approche phénoménologique prenant doublement ses distances avec la psychanalyse et le béhaviourisme, posant l’émotion comme dégradation spontanée et vécue de la conscience en face du monde, le corps n’étant étrangement dans ce contexte rien d’autre que la croyance vécue de la conscience. L’auteur compare cette position avec la définition goffmanienne de la « situation sociale », qui identifie l’émotion comme une perturbation dans l’ordre normal du déroulement des interactions circonscrites dans la situation. L’interactionnisme symbolique est confronté à l’existentialisme sartrien et à sa position d’une structure magique sous-jacente du monde, en faisant de l’une le miroir de l’autre. Bien que s’inscrivant tous deux dans le courant phénoménologique, Jean-Paul Sartre et Erving Goffman sont ici saisis dans leur stratégie d’évitement des théories psychologiques. En conclusion est posée la question du statut heuristique à conférer au concept de « magique » invoqué par Jean-Paul Sartre.Sartre and his theory of emotions: a confrontation with GoffmanThe author confronts the positions of Jean-Paul Sartre and Erving Goffman. In his Esquisse d’une théorie des émotions (1938, Jean-Paul Sartre proposes a phenomenological approach. Taking his distances both with psychoanalysis and behaviourism, he places emotion as a spontaneous and experienced degradation of the conscience confronted with the world; the body thus becoming strangely nothing other than the experienced belief of consciousness. The author compares this position with Goffman’s definition of the “social situation”. Here, emotion is identified as a disturbance intervening in the normal order of the sequence of events delimited by the situation. Symbolic

  16. Modélisation d'une détente quasi-isotherme d'un gaz par contact direct avec un fluide caloporteur

    OpenAIRE

    Blaise , Mathilde; Maillet , Denis; Feidt , Michel; Alemany , Antoine; Forcinetti , Renato

    2015-01-01

    National audience; Les besoins en électricité sont croissants, cependant, les rejets thermiques industriels sont peu valorisés. La reconsidération des moteurs à apport de chaleur externe est un enjeu d'actualité pour la valorisation des rejets thermiques. Dans ces derniers, la phase de détente motrice offre des possibilités d'amélioration. L'idée ici est d'accompagner cette étape par un apport de chaleur par contact direct avec un fluide caloporteur. En effet, la détente d'un gaz entre une ha...

  17. Emission d'effluents gazeux lors du compostage de substrats organiques en relation avec l'activité microbiologique (nitrification/dénitrification)

    OpenAIRE

    Yulipriyanto , Hiéronymus

    2001-01-01

    Co-tutelle avec l'Indonesie; The awakening of the importance of the waste management and the safeguarding of resources led actors of the agricultural world more and more to be interested in composting as a mode of waste processing of breeding effluents or mud of wastewater treatment plants. The ways of use for these substrates, spreading, composting or other, must thus be compared. One knows indeed that agriculture is responsible for a significant share of the ammonia (NH3) and nitrous oxide ...

  18. The interaction of circularly polarised electromagnetic waves with a plasma; Interaction d'ondes electromagnetiques a polarisation circulaire avec un plasma

    Energy Technology Data Exchange (ETDEWEB)

    Consoli, T; Legardeur, R; Slama, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    The interaction of left and right handed circularly polarised waves with a plasma are studied. The individual trajectories of charges of both signs are traced with a analogical simulator. Applications to plasma heating and diagnostic are deduced. (author) [French] On etudie l'interaction des ondes a polarisation circulaire droite ou gauche avec un plasma. Les trajectoires individuelles des charges sont tracees a l'aide d'un dispositif analogique. On en deduit les applications au chauffage d'un plasma et a la mesure de ses parametres caracteristiques. (auteur)

  19. Confined prostate cancer treated by conformational irradiation with intensity modulation with or without echography repositioning: is the dose received equivalent to the prescribed dose?; Cancer prostatique localise traite par irradiation conformationnelle avec modulation d'intensite avec ou sans repositionnement echographique: la dose recue est-elle equivalente a la dose prescrite?

    Energy Technology Data Exchange (ETDEWEB)

    Arnaud, A.; Peignaux, K.; Brenier, J.P.; Truc, G.; Naudy, S.; Maingon, P.; Crehange, G. [Centre Georges-Francois Leclerc, Dept. de Radiotherapie, 21 - Dijon (France); Regis, A. [CHU le Bocage, Service de Radiodiagnostic, 21 - Dijon (France); Deville, C.; Bonnetain, F. [Centre Georges-Francois Leclerc, Dept. de Biostatique, 21 - Dijon (France)

    2006-11-15

    The results suggest it would be possible to dispense a homogenous dose in agreement with the ICRU recommendations, nearer than the forward looking dose when the daily echographic repositioning is applied. This repositioning does not influence significantly the dosimetry for the risk organs. These results will validated in a bigger population. (N.C.)

  20. Littérature progressive du français avec 600 activités : niveau intermédiaire

    CERN Document Server

    Blondeau, Nicole; Né, Marie-Françoise

    2004-01-01

    Une organisation claire : le texte littéraire, une courte biographie de l'auteur et des notes explicatives sur la page de gauche; des activités guidées de découverte et d'exploitation sur la page de droite la progression : les textes sont classés par ordre chronologique. Les activitées de lecture et d'analyse constituent un véritable parcours d'aprentissage le choix des textes : du Moyen Age à nos jours, avec une priorité accordée à la littérature contemporaine (XIXe et XXe), des textes parmi les plus représentatifs de la littérature française, avec une ouverture sur la littérature francophone l'appareil pédagogique propose une approche facilitant la découverte et la compréhension de l'histoire littéraire, le repérage des genres et la portée des idées un usage souple : pour la classe ou en auto-apprentissage A découvrir dans cette deuxième édition revue et augmentée:

  1. Littérature progressive du français avec 600 activités : niveau débutant

    CERN Document Server

    Blondeau, Nicole; Né, Marie-Françoise

    2004-01-01

    Une organisation claire : le texte littéraire, une courte biographie de l'auteur et des notes explicatives sur la page de gauche; des activités guidées de découverte et d'exploitation sur la page de droite la progression : les textes sont classés par ordre chronologique. Les activitées de lecture et d'analyse constituent un véritable parcours d'aprentissage le choix des textes : du Moyen Age à nos jours, avec une priorité accordée à la littérature contemporaine (XIXe et XXe), des textes parmi les plus représentatifs de la littérature française, avec une ouverture sur la littérature francophone l'appareil pédagogique propose une approche facilitant la découverte et la compréhension de l'histoire littéraire, le repérage des genres et la portée des idées un usage souple : pour la classe ou en auto-apprentissage A découvrir dans cette deuxième édition revue et augmentée:

  2. Apprivoiser le conte: notes sur un atelier en langue seconde avec la conteuse professionnelle, Stéphanie Bénéteau

    Directory of Open Access Journals (Sweden)

    Stéphanie Nutting

    2015-06-01

    Full Text Available Voici un compte rendu de l'atelier avec la conteuse professionnelle, Stéphanie Bénéteau. Organisé pour un groupe d'étudiants de niveau universitaire, l'atelier avait pour but d'initier les étudiants à une technique qui permet de se souvenir d'un conte sans le mémoriser. Le compte rendu est émaillé de propos recueillis lors d'un entretien avec Bénéteau réalisé en 2014. Ce texte a deux objectifs: 1-fournir des outils qui permettront aux lecteurs de mettre en pratique la méthode proposée par Bénéteau 2-fournir des observations spécifiques sur le rôle de l'improvisation dans l'apprentissage du conte en situation de français, langue étrangère.

  3. Conversations avec Jules Hoüel regards sur la géométrie non euclidienne et l’analyse infinitésimale vers 1875

    CERN Document Server

    Nabonnand, Philippe

    2017-01-01

    Jules Hoüel (1823-1886) a occupé une place particulière dans les mathématiques en France durant la seconde partie du 19ème siècle. Par ses travaux de traduction et ses recensions, il a vivement contribué à la réception de la géométrie non euclidienne de Bolyai et Lobatchevski ainsi qu’aux débats sur les fondements de l’analyse. Il se situe au centre d’un vaste réseau international de correspondances en lien avec son rôle de rédacteur pour le Bulletin des sciences mathématiques et astronomiques. Cet ouvrage contient les correspondances actives et passives de Hoüel avec Joseph-Marie De Tilly, Gaston Darboux et Victor-Amédée Le Besgue ainsi qu’une introduction qui se focalise sur la découverte de l’impossibilité de démontrer le postulat des parallèles d’Euclide et l’apparition des premiers exemples de fonctions continues non dérivables.

  4. Mesure asymétrie avant-arriere des quarks lourds a LEP1 avec le détecteur OPAL

    CERN Document Server

    Lafoux, H

    A partir de l'ensemble des données accumulées par OPAL au cours de la première phase de fonctionnement du LEP, nous avons mesuré l'asymétrie avant-arrière des quarks b et c au voisinage du pic du Zo. Utilisant une méthode traditionnelle, basée sur la détection des leptons produits dans les désintégrations semi-leptoniques des hadrons lourds, nous avons cherché à optimiser chaque étape de la mesure, en mettant en œuvre les algorithmes les plus appropriés. Le recours aux réseaux de neurones artificiels s'est en particulier avéré d'une grande utilité lorsque le problème à résoudre impliquait la prise en compte simultanée de multiples sources d'informations, d'origine et de nature très variées. Nos résultats sont en bon accord avec ceux des autres mesures effectuées à LEP et compatibles avec les prédictions du Modèle Standard pour un quark top de 174 ± 31 GeV/c2 et un boson de Higgs de masse comprise entre 60 et 1000 GeV/c2

  5. Reduced multiplication modules

    Indian Academy of Sciences (India)

    if M is a von Neumann regular module (VNM); i.e., every principal submodule of M is a summand submodule. Also if M is an injective R-module, then M is a VNM. Keywords. Multiplication module; reduced module; minimal prime submodule;. Zariski topology; extremally disconnected. 1. Introduction. In this paper all rings are ...

  6. Modulational effects in accelerators

    International Nuclear Information System (INIS)

    Satogata, T.

    1997-01-01

    We discuss effects of field modulations in accelerators, specifically those that can be used for operational beam diagnostics and beam halo control. In transverse beam dynamics, combined effects of nonlinear resonances and tune modulations influence diffusion rates with applied tune modulation has been demonstrated. In the longitudinal domain, applied RF phase and voltage modulations provide mechanisms for parasitic halo transport, useful in slow crystal extraction. Experimental experiences with transverse tune and RF modulations are also discussed

  7. La structure de Jordan des matrices de transfert des modeles de boucles et la relation avec les hamiltoniens XXZ

    Science.gov (United States)

    Morin-Duchesne, Alexi

    Lattice models such as percolation, the Ising model and the Potts model are useful for the description of phase transitions in two dimensions. Finding analytical solutions is done by calculating the partition function, which in turn requires finding eigenvalues of transfer matrices. At the critical point, the two dimensional statistical models are invariant under conformal transformations and the construction of rational conformal field theories, as the continuum limit of these lattice models, allows one to compute the partition function at the critical point. Many researchers think however that the paradigm of rational conformal conformal field theories can be extended to include models with non diagonalizable transfer matrices. These models would then be described, in the scaling limit, by logarithmic conformal field theories and the representations of the Virasoro algebra coming into play would be indecomposable. We recall the construction of the double-row transfer matrix DN (λ, u) of the Fortuin-Kasteleyn model, seen as an element of the Temperley-Lieb algebra. This transfer matrix comes into play in physical theories through its representation in link modules (or standard modules). The vector space on which this representation acts decomposes into sectors labelled by a physical parameter d, the number of defects, which remains constant or decreases in the link representations. This thesis is devoted to the identification of the Jordan structure of DN(λ, u) in the link representations. The parameter β = 2 cos λ = -(q + q-1) fixes the theory : for instance β = 1 for percolation and 2 for the Ising model. On the geometry of the strip with open boundary conditions, we show that DN(λ, u) has the same Jordan blocks as its highest Fourier coefficient, FN. We study the non-diagonalizability of FN through the divergences of some of the eigenstates of ρ(F N) that appear at the critical values of λ. The Jordan cells we find in ρ(DN(λ, u)) have rank 2 and

  8. Identification du module d'Young de matériaux réfractaires à base SiC

    OpenAIRE

    De Bilbao , E.; Blond , E.; Michel , Christine; Cutard , Thierry; Schmitt , N.; Poirier , J.

    2010-01-01

    National audience; Cette étude porte sur l'identification du module d'Young de matériaux réfractaires. Paramètre indispensable au modèle thermomécanique choisi, le module d'Young est identifié directement à partir d'un essai de flexion. De façon inhabituelle, il est proposé ici de déterminer le module à partir de la décharge pour éliminer certains effets perturbateurs issus du comportement non linéaire du matériau combinés avec ceux provenant des déformations de contact entre l'appareillage e...

  9. Reaction of uranium and plutonium carbides with austenitic steels; Reaction des carbures d'uranium et de plutonium avec des aciers austenitiques

    Energy Technology Data Exchange (ETDEWEB)

    Mouchnino, M [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-01

    The reaction of uranium and plutonium carbides with austenitic steels has been studied between 650 and 1050 deg. C using UC, steel and (UPu)C, steel diffusion couples. The steels are of the type CN 18.10 with or without addition of molybdenum. The carbides used are hyper-stoichiometric. Tests were also carried out with UCTi, UCMo, UPuCTi and UPuCMo. Up to 800 deg. C no marked diffusion of carbon into stainless steel is observed. Between 800 and 900 deg. C the carbon produced by the decomposition of the higher carbides diffuses into the steel. Above 900 deg. C, decomposition of the monocarbide occurs according to a reaction which can be written schematically as: (U,PuC) + (Fe,Ni,Cr) {yields} (U,Pu) Fe{sub 2} + Cr{sub 23}C{sub 6}. Above 950 deg. C the behaviour of UPuCMo and that of the titanium (CN 18.12) and nickel (NC 38. 18) steels is observed to be very satisfactory. (author) [French] La reaction des carbures d'uranium et de plutonium avec des aciers austenitiques a ete etudiee entre 650 deg. C et 1050 deg. C a partir de couples de diffusion UC, acier et (UPu)C, acier. Les aciers sont du type CN 18.10 avec ou sans addition de molybdene. Les carbures utilises sont hyper-stoechiometriques. En outre on a fait des essais avec UCTi, UCMo, UPuCTi, UPuCMo. Jusqu'a 800 deg. C on ne detecte pas de diffusion sensible du carbone dans l'acier inoxydable. Entre 800 et 900 deg. C il y a diffusion dans l'acier du carbone provenant de la decomposition des carbures superieurs. A partir de 900 deg. C il y a decomposition du monocarbure selon une reaction que l'on ecrit schematiquement: (U,PuC) + (Fe, Ni, Cr) {yields} (U,Pu)Fe{sub 2} + Cr{sub 23}C{sub 6}. Nous notons a 950 deg. C le bon comportement de UPuCMo ainsi que celui des aciers au titane (CN 18. 12) et au nickel (NC 38.18). (auteur)

  10. Les politiques d’appui à l’agriculture familiale au Brésil : quelques éléments de comparaison avec le Maroc

    Directory of Open Access Journals (Sweden)

    Philippe Bonnal

    2015-10-01

    Full Text Available Au Brésil comme au Maroc, le secteur agricole est marqué par des différences extrêmes en termes de taille d’exploitation, ainsi que de niveaux d’équipement, de capitalisation et de techniques. L’article présente la politique brésilienne d’appui à l’agriculture familiale, et quelques éléments de comparaison avec les choix faits au Maroc. Les politiques agricoles brésiliennes proposent depuis une vingtaine d’années un appui spécifique aux exploitations familiales, avec notamment la constitution d’un ministère spécifique. De nombreux dispositifs d’appui à l’agriculture familiale ont été mis en place, dont notamment des crédits à taux préférentiel et des programmes d’achat de denrées agricoles pour les institutions publiques (écoles, hôpitaux, etc.. Dans les zones rurales particulièrement fragiles, des dispositifs permettent une coordination entre l’ensemble des politiques publiques concernant ces zones. Enfin, la conception et la mise en oeuvre de ces politiques publiques se font avec une forte implication des syndicats agricoles. Les politiques publiques brésiliennes et marocaines reconnaissent la dualité du monde agricole, mais cette dualité est définie par zone au Maroc, tandis qu’elle est fondée sur des caractéristiques explicites des exploitations au Brésil. Dans les deux pays, le coeur des politiques publiques d’appui aux exploitations familiales porte sur l’aide à l’investissement. Au-delà de ce coeur commun, les politiques brésiliennes ont plus spécifiquement développé des approches au niveau des territoires locaux et associent plus fortement qu’au Maroc les organisations professionnelles agricoles représentant l’agriculture familiale dans la conception de l’action publique. La comparaison des politiques agricoles au Maroc et au Brésil sur quelques éléments permet de souligner la forte étendue des choix qu’il est possible de considérer, pour définir des

  11. Chemical Looping Combustion with Different Types of Liquid Fuels Combustion en boucle chimique avec différentes charges liquides

    Directory of Open Access Journals (Sweden)

    Hoteit A.

    2011-02-01

    travail est d’étudier la faisabilité de la combustion partielle ou totale des charges liquides dans les conditions du CLC au contact d’un matériau porteur d’oxygène. Un petit réacteur en lit fluidisé opérant en batch a été développé pour permettre alternativement le contact du matériau porteur d’oxygène avec une charge liquide ou de l’air. Le réacteur de 20 mm de diamètre est rempli de 45 g de particules de NiAl0.44O1.67. Environ 1-2 g de charge liquide est injecté par pulse dans le lit à des températures allant jusqu’à 950˚C. Différentes charges liquides ont été étudiées, du dodécane au fioul lourd n˚2. Les résultats montrent que pendant la période de réduction du matériau porteur d’oxygène, il est possible de convertir tous les hydrocarbures injectés. À l’issue de cette phase, il ne subsiste pas de dépôt de coke à la surface des particules. En fonction de la quantité d’oxygène disponible dans le lit, on effectue une combustion totale ou partielle des hydrocarbures injectés. Des résultats similaires sont obtenus pour les différents hydrocarbures testés, malgré leurs propriétés a priori très différentes.

  12. Construire les stratégies avec le Balanced Scorecard:vers une approche interactive du modèle de Kaplan et Norton

    OpenAIRE

    Gérald Naro; Denis Travaillé

    2010-01-01

    (VF)L’objectif de cet article est de confronter le Balanced Scorecard avec le modèle des leviers de contrôle de Simons (1995) et de discuter de son rôle dans les différentes phases du processus stratégique. Nous privilégions une représentation du BSC comme outil de contrôle interactif. Notre recherche est fondée sur une méthodologie longitudinale de type recherche action à partir de l’étude de deux cas. Les résultats montrent que le BSC crée un processus de construction collective favorisant ...

  13. INFLUENCE DES TEMPERATURES OPERATIONNELLES SUR LA PERFORMANCE D’UN REFRIGERATEUR SOLAIRE A ADSORPTION QUI FONCTIONNE AVEC LE COUPLE CHARBON ACTIF-METHANOL

    OpenAIRE

    H SOUALMI; Z SAADI; A RAHMANI

    2014-01-01

    Le séchage des produits alimentaires au soleil est un moyen efficace, facile et économique pour conserver les aliments, en particulier les fruits. Le séchoir solaire est l'équipement le plus populaire pour le séchage des fruits. En raison de la nature intermittente de l'énergie solaire, le stockage de l'énergie thermique est nécessaire pour assurer un fonctionnement prolongé du séchoir. L'objectif principal de cette étude est d'évaluer l'efficacité du séchoir solaire intégré avec un lit en gr...

  14. Accès aux soins des personnes originaires d&8217;Afrique subsaharienne vivant avec une hépatite B chronique

    OpenAIRE

    Vignier, N.; Spira, R. D.; Lert, F.; Pannetier, J.; Ravalihasy, Andrainolo; Gosselin, A.; Lydie, N.; Bouchaud, O.; Desgrées du Loû, Annabel; Grp, Anrs-Parcours

    2017-01-01

    Objectif : L'objectif de cette étude est d'analyser l'accès aux soins des personnes originaires d'Afrique subsaharienne (ASS) vivant avec une hépatite B chronique (HBC) en France. Méthodes : L'enquête ANRS-Parcours est une étude biographique réalisée en 2012-2013 auprès de personnes originaires d'ASS recrutées dans des services de prise en charge de l'HBC en Ile-de-France. Les données ont été recueillies en face-à-face à l'aide d'une grille biographique et d'un questionnaire standardisé. ...

  15. Electroabsorption optical modulator

    Energy Technology Data Exchange (ETDEWEB)

    Skogen, Erik J.

    2017-11-21

    An electroabsorption modulator incorporates waveguiding regions along the length of the modulator that include quantum wells where at least two of the regions have quantum wells with different bandgaps. In one embodiment of the invention, the regions are arranged such that the quantum wells have bandgaps with decreasing bandgap energy along the length of the modulator from the modulator's input to its output. The bandgap energy of the quantum wells may be decreased in discrete steps or continuously. Advantageously, such an arrangement better distributes the optical absorption as well as the carrier density along the length of the modulator. Further advantageously, the modulator may handle increased optical power as compared with prior art modulators of similar dimensions, which allows for improved link gain when the optical modulator is used in an analog optical communication link.

  16. CDC 7600 module slice

    CERN Multimedia

    Each module contained 8 circuit cards for a total of about 300-500 uncovered transistors packaged with face plates so the Freon plates wouldn't touch the circuits. (cooling plates that surrounded each module).

  17. Exploration Augmentation Module Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Exploration Augmentation Module (EAM) project goal is to design and deliver a flight module that is to be deployed to Earth-Lunar Distant Retrograde Orbit (DRO)....

  18. Reaction of uranium and plutonium carbides with nitrogen; Reaction avec l'azote des carbures d'uranium et de plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Lorenzelli, R; Martin, A; Schickel, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1966-03-01

    Uranium and plutonium carbides react with nitrogen during the grinding process preceding the final sintering. The reaction occurs even in argon atmospheres containing a few percent of residual nitrogen. The resulting contamination is responsible for the appearance of an equivalent quantity of higher carbide in the sintered products; nitrogen remains quantitatively in the monocarbide phase. UC can be transformed completely into nitride under a nitrogen pressure, at a temperature as low as 400 C. The reaction is more sluggish with PuC. The following reactions take places: UC + 0,8 N{sub 2} {yields}> UN{sub 1.60} + C and PuC + 0,5 N{sub 2} {yields} PuN + C. (authors) [French] Les carbures d'uranium et de plutonium reagissent avec l'azote au cours du broyage qui precede le frittage final. Cette reaction est sensible meme sous des atmospheres d'argon ne contenant que quelques pour cent d'azote. Cette contamination se traduit sur les produits frittes par l'apparition d'une quantite equivalente de carbure superieur, l'azote restant fixe quantitativement dans la phase monocarbure. On peut transformer entierement UC en nitrure par action de l'azote sous pression des 400 C. La reaction est plus difficile avec PuC. Les reactions sont les suivantes: UC + 0,8 N{sub 2} {yields} UN{sub 1.60} + C et PuC + 0,5 N{sub 2} {yields} PuN + C.

  19. CDC 6600 Cordwood Module

    CERN Multimedia

    1964-01-01

    The CDC 6600 cordwood module containing 64 silicon transistors. The module was mounted between two plates that were cooled conductive by a refrigeration unit via the front panel. The construction of this module uses the cord method, so called because the resistors seem to be stacked like cord between the two circuit boards in order to obtain a high density. The 6600 model contained nearly 6,000 such modules.

  20. Modulating lignin in plants

    Science.gov (United States)

    Apuya, Nestor; Bobzin, Steven Craig; Okamuro, Jack; Zhang, Ke

    2013-01-29

    Materials and methods for modulating (e.g., increasing or decreasing) lignin content in plants are disclosed. For example, nucleic acids encoding lignin-modulating polypeptides are disclosed as well as methods for using such nucleic acids to generate transgenic plants having a modulated lignin content.

  1. An investigation into modulators

    International Nuclear Information System (INIS)

    Heine, E.

    1988-01-01

    In the framework of the MEA-update it is important to establish which modulators are necessary. In this report it is lookedif the existing modulators can be maintained or new modulators have to be made. Besides technical aspects also material expenses and necessary manpower play a role. 12 figs.; 6 tabs

  2. Weakly Coretractable Modules

    Science.gov (United States)

    Hadi, Inaam M. A.; Al-aeashi, Shukur N.

    2018-05-01

    If R is a ring with identity and M is a unitary right R-module. Here we introduce the class of weakly coretractable module. Some basic properties are investigated and some relationships between these modules and other related one are introduced.

  3. Amplitude modulation detection with concurrent frequency modulation.

    Science.gov (United States)

    Nagaraj, Naveen K

    2016-09-01

    Human speech consists of concomitant temporal modulations in amplitude and frequency that are crucial for speech perception. In this study, amplitude modulation (AM) detection thresholds were measured for 550 and 5000 Hz carriers with and without concurrent frequency modulation (FM), at AM rates crucial for speech perception. Results indicate that adding 40 Hz FM interferes with AM detection, more so for 5000 Hz carrier and for frequency deviations exceeding the critical bandwidth of the carrier frequency. These findings suggest that future cochlear implant processors, encoding speech fine-structures may consider limiting the FM to narrow bandwidth and to low frequencies.

  4. Un hommage à Benoît Mandelbrot (1924-2010) : zoom sur une représentation tridimensionnelle de l'ensemble de Mandelbrot avec 'mapping' des arguments

    OpenAIRE

    Colonna , Jean-François

    2011-01-01

    A tribute to Benoît Mandelbrot (1924-2010) : tridimensional zoom in on the Mandelbrot set with mapping of the arguments (Un hommage à Benoît Mandelbrot (1924-2010) : zoom sur une représentation tridimensionnelle de l'ensemble de Mandelbrot avec 'mapping' des arguments)

  5. Recovery of sludge from the treatment of liquid radioactive effluents by co-precipitation with calcium carbonate: laboratory study; Recuperation des boues de traitement des effluents radioactifs liquides par coprecipitation avec le carbonate de calcium: etude de laboratoire

    Energy Technology Data Exchange (ETDEWEB)

    Patti, F.; Gailledreau, C.; Cohen, P.

    1961-02-24

    As during the treatment by co-precipitation with calcium carbonate of liquid radioactive residues, a partial decontamination can be obtained by simply agitating an already formed radioactive sludge with the effluent to be processed, the authors study whether it would be possible to first perform a co-precipitation with a lower dose of calcium carbonate and then to complete decontamination by agitating with an adequate quantity of sludge stored during preceding operations. The authors report the study of the influence of reactant quantity on the chemical treatment efficiency, of the evolution of the activity of a radioactive residual solution in contact with a precipitate, of the cleaner element, of a precipitate reuse, of the technological and economic aspects, and of another possibility of reduction of the precipitate volume [French] Dans le traitement par coprecipitation avec le carbonate de calcium des residus radioactifs liquides, une decontamination partielle peut etre obtenue en agitant simplement une boue radioactive deja formee avec l'effluent a traiter. En consequence, il pourrait etre possible d'effectuer d'abord une coprecipitation avec une dose plus faible de carbonate de calcium et de completer ensuite la decontamination en agitant le liquide avec une quantite convenable de boue stockee a partir d'operations precedentes. (auteurs)

  6. Divisible ℤ-modules

    Directory of Open Access Journals (Sweden)

    Futa Yuichi

    2016-03-01

    Full Text Available In this article, we formalize the definition of divisible ℤ-module and its properties in the Mizar system [3]. We formally prove that any non-trivial divisible ℤ-modules are not finitely-generated.We introduce a divisible ℤ-module, equivalent to a vector space of a torsion-free ℤ-module with a coefficient ring ℚ. ℤ-modules are important for lattice problems, LLL (Lenstra, Lenstra and Lovász base reduction algorithm [15], cryptographic systems with lattices [16] and coding theory [8].

  7. Study of the frequency modulation of various U.H.F. signals occurring in a linear electron accelerator; Etude de la modulation de frequence de divers signaux U.H.F. existant dans un accelerateur lineaire d'electrons

    Energy Technology Data Exchange (ETDEWEB)

    Bergere, R; Veyssiere, A; Daujat, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-06-01

    This paper contains a digest of a series of studies on the frequency modulation of U.H.F. fields and signals associated with the linear electron accelerator at Saclay. We first consider the frequency modulation of a U. H. F. pulse before its injection into an accelerating structure and after its subsequent propagation when no accelerated electrons are present. We then apply a similar analysis to the frequency modulation due to the direct interaction of the electron beam itself, and the accelerating U.H.F. fields. Finally we consider the phase modulation of the elementary electron packet itself. This phase modulation can be correctly interpreted by considering the dynamics of the electron beam as such. This analysis moreover, gives a correct interpretation of the evolution of the phase modulation with time, as the elementary electron packets move along with the sinusoidal U.H.F. accelerating fields. (authors) [French] Cet article resume les etudes faites sur l'accelerateur lineaire d'electrons de Saclay a propos de la modulation de frequence des divers signaux U.H.F. presents autour de l'accelerateur. On etudie d'abord la modulation de frequence des impulsions U.H.F. entrant sur la structure acceleratrice ou transmises par cette structure en l'absence de faisceau d'electrons acceleres. On analyse ensuite la modulation de frequence resultant de l'interaction d'une de ces ondes avec le faisceau d'electrons acceleres. On etudie enfin, la modulation de phase des divers paquets elementaires constituant une impulsion d'electrons acceleres. On montre comment cette modulation de phase peut s'expliquer par des considerations sur la dynamique du faisceau et conduire a une representation dans les divers cas possibles de l'evolution de la phase d'accrochage des electrons sur l'onde sinusoidale progressive de champ accelerateur. (auteurs)

  8. Classes of modules

    CERN Document Server

    Dauns, John

    2006-01-01

    Because traditional ring theory places restrictive hypotheses on all submodules of a module, its results apply only to small classes of already well understood examples. Often, modules with infinite Goldie dimension have finite-type dimension, making them amenable to use with type dimension, but not Goldie dimension. By working with natural classes and type submodules (TS), Classes of Modules develops the foundations and tools for the next generation of ring and module theory. It shows how to achieve positive results by placing restrictive hypotheses on a small subset of the complement submodules, Furthermore, it explains the existence of various direct sum decompositions merely as special cases of type direct sum decompositions. Carefully developing the foundations of the subject, the authors begin by providing background on the terminology and introducing the different module classes. The modules classes consist of torsion, torsion-free, s[M], natural, and prenatural. They expand the discussion by exploring...

  9. Diagnostic tardif d'une hyperoxalurie primitive au stade d'insuffisance rénale chronique terminale avec hypoparathyroïdie sévère

    Science.gov (United States)

    El Ghali, Zineb; Lahcen, Zineb Ait; Fadili, Wafaa; Kaitouni, Abderrahim Idrissi; Hakkou, Mohamed; Hamdaoui, Abderrachid; Laouad, Inass

    2014-01-01

    L'hyperoxalurie primitive est une anomalie métabolique congénitale rare caractérisée par un excès de production avec accumulation d'oxalate secondaire à un déficit enzymatique hépatique. Nous rapportons le cas d'un patient de 18 ans qui avait comme antécédent des lithiases rénales récidivantes depuis l'enfance évoluant vers l'insuffisance rénale chronique terminale, mis en hémodialyse périodique depuis 4 ans avec apparition d'une anémie résistante à l’érythropoïétine pour laquelle il a été multitransfusé et qui était admis pour prise en charge de douleurs osseuses invalidantes d'aggravation progressive associées à un syndrome tumoral fait d'adénopathies périphériques et de splénomégalie avec dyspnée et altération de l’état général. Le bilan réalisé avait objectivé de multiples images lytiques lacunaires et condensantes au niveau des poignets et des mains avec des petits reins calcifiés, une pleurésie avec péricardite de grande abondance drainée, une ascite de moyenne abondance avec splénomégalie homogène, une anémie normochrome normocytaire à 7.2 g/dl avec hyperferritinémie à 1129 μg/l et un syndrome inflammatoire biologique. La calcémie était spontanément normale à 97 mg/l avec hyperphosphorémie à 83 mg/l et hypoparathyroïdie à 74,85 pg/ml. Les PAL étaient à 136 UI/l, l'aluminium sérique à 13μg/l et la Vitamine D native à 20,87ng/ml. Le diagnostic d'hyperoxalurie a été retenu sur les données de la biopsie ostéomédullaire objectivant des dépôts de cristaux d'oxalate de calcium avec fibrose médullaire et réaction macrophagique à corps étranger. L’évolution a été marquée par la survenue de fractures spontanées récidivantes au niveau de l’épaule et des 2 hanches. PMID:25328593

  10. Accouchées avec statut sérologique VIH inconnu à Lubumbashi, RD Congo: proportion et déterminants

    Science.gov (United States)

    Nkoy, Albert Mwembo-Tambwe A; Kayamba, Prosper Kalenga Muenze; Donnen, Philippe; Mukalenge, Faustin Chenge; Humblet, Perrine; Dramaix, Michèle; Buekens, Pierre

    2012-01-01

    Introduction Beaucoup d'enfants vivant avec le VIH ont été infectés par leurs mères. Pour prévenir la transmission verticale les femmes doivent d'abord connaître leur statut sérologique VIH.L'objectif de cette étude était de déterminer la proportion de statut VIH inconnu à la naissance et d'identifier les facteurs associés. Méthodes C'est une étude transversale réalisée dans 10 structures sanitaires de Lubumbashi de Juin à Septembre 2010. La taille de l’échantillon était de 602 accouchées. Les statistiques descriptives usuelles et la régression logistique ont été utilisées. Résultats Parmi les accouchées, 52,5% ignoraient leur statut sérologique. Parmi elles, 62,9% accepteraient de faire le test VIH à la maternité. La proportion des femmes avec un statut sérologique VIH inconnu était significativement plus élevée chez celles qui n'avaient pas suivi de CPN (Odds Ratio ajusté (ORa) = 5,8; Intervalle de Confiance (IC) 95%: 1,7-19,8); chez celles qui avaient un bas niveau d'instruction (ORa = 1,5; IC 95%: 1,1-2,1) et chez celles qui ne savaient pas que la transmission verticale du VIH pouvaient se faire au moment de l'accouchement (ORa = 1,5; IC 95%: 1,0-2,4). Conclusion La proportion de femmes qui accouchent sans connaître leur statut sérologique au VIH est encore importante, malgré le fait que le dépistage du VIH soit proposé lors des CPN. Dans les zones à haute séroprévalence de VIH, aucune femme ne devrait accoucher sans être dépistée au VIH. Ce serait une opportunité manquée. PMID:22891083

  11. FASTBUS Snoop Diagnostic Module

    International Nuclear Information System (INIS)

    Walz, H.V.; Downing, R.

    1980-11-01

    Development of the FASTBUS Snoop Module, undertaken as part of the prototype program for the new interlaboratory data bus standard, is described. The Snoop Module resides on a FASTBUS crate segment and provides diagnostic monitoring and testing capability. Communication with a remote host computer is handled independent of FASTBUS through a serial link. The module consists of a high-speed ECL front-end to monitor and single-step FASTBUS cycles, a master-slave interface, and a control microprocessor with serial communication ports. Design details and performance specifications of the prototype module are reported. 9 figures, 1 table

  12. Bracket for photovoltaic modules

    Science.gov (United States)

    Ciasulli, John; Jones, Jason

    2014-06-24

    Brackets for photovoltaic ("PV") modules are described. In one embodiment, a saddle bracket has a mounting surface to support one or more PV modules over a tube, a gusset coupled to the mounting surface, and a mounting feature coupled to the gusset to couple to the tube. The gusset can have a first leg and a second leg extending at an angle relative to the mounting surface. Saddle brackets can be coupled to a torque tube at predetermined locations. PV modules can be coupled to the saddle brackets. The mounting feature can be coupled to the first gusset and configured to stand the one or more PV modules off the tube.

  13. Crossed modules of racks

    OpenAIRE

    Crans, Alissa S.; Wagemann, Friedrich

    2014-01-01

    We generalize the notion of a crossed module of groups to that of a crossed module of racks. We investigate the relation to categorified racks, namely strict 2-racks, and trunk-like objects in the category of racks, generalizing the relation between crossed modules of groups and strict 2-groups. Then we explore topological applications. We show that by applying the rack-space functor, a crossed module of racks gives rise to a covering. Our main result shows how the fundamental racks associate...

  14. Model theory and modules

    CERN Document Server

    Prest, M

    1988-01-01

    In recent years the interplay between model theory and other branches of mathematics has led to many deep and intriguing results. In this, the first book on the topic, the theme is the interplay between model theory and the theory of modules. The book is intended to be a self-contained introduction to the subject and introduces the requisite model theory and module theory as it is needed. Dr Prest develops the basic ideas concerning what can be said about modules using the information which may be expressed in a first-order language. Later chapters discuss stability-theoretic aspects of module

  15. Delphi Accounts Receivable Module -

    Data.gov (United States)

    Department of Transportation — Delphi accounts receivable module contains the following data elements, but are not limited to customer information, cash receipts, line of accounting details, bill...

  16. Agir contre le harcèlement moral au travail pour en finir avec les idées reçues

    CERN Document Server

    Grebot, Elisabeth

    2010-01-01

    Censé être libérateur, le travail est souvent synonyme de mal-être. Le harcèlement, avec le stress et la surcharge, en est l'une des principales causes. Processus complexe qui implique de nombreux acteurs, le harcèlement touche plus de 12 % des salariés, majoritairement des femmes. Qu'il soit individuel, managérial ou stratégique, visant à contourner des procédures de licenciement, le harcèlement procède des mêmes modes opératoires : pression, humiliation, isolement, désolidarisation collective... qui conduisent la cible à vivre un véritable enfer. Au travers des principales idées reçues, Elisabeth Grebot détaille les mécanismes du harcèlement, les forces en présence, et montre le rôle essentiel du collectif pour mieux vivre ensemble au travail.

  17. Growth Modulation in Achondroplasia.

    Science.gov (United States)

    McClure, Philip K; Kilinc, Eray; Birch, John G

    2017-09-01

    Achondroplasia is the most common skeletal dysplasia with a rate of nearly 1/10,000. The development of lower extremity deformity is well documented, and various modes of correction have been reported. There are no reports on the use of growth modulation to correct angular deformity in achondroplasia. Medical Records from 1985 to 2015 were reviewed for the diagnosis of achondroplasia and growth modulation procedures. Patients who had been treated for angular deformity of the legs by growth modulation were identified. A detailed analysis of their medical record and preoperative and final lower extremity radiographs was completed. Four patients underwent growth modulation procedures, all to correct existing varus deformity of the legs. Three of the 4 patients underwent bilateral distal femoral and proximal tibial growth modulation. The remaining patient underwent tibial correction only. Two of the 4 patients had a combined proximal fibular epiphysiodesis. All limbs had some improvement of alignment; however, 1 patient went on to bilateral osteotomies. Only 1 limb corrected to a neutral axis with growth modulation alone at last follow-up, initial implantation was done before 5 years of age. Growth modulation is an effective means for deformity correction in the setting of achondroplasia. However implantation may need to be done earlier than would be typical for patients without achondroplasia. Osteotomy may still be required after growth modulation for incomplete correction.

  18. Defect detection module

    International Nuclear Information System (INIS)

    Ernwein, R.; Westermann, G.

    1986-01-01

    The ''defect detector'' module is aimed at exceptional event or state recording. Foreseen for voltage presence monitoring on high supply voltage module of drift chambers, its characteristics can also show up the vanishing of supply voltage and take in account transitory fast signals [fr

  19. The Strip Module

    DEFF Research Database (Denmark)

    Pedersen, Tommy

    1996-01-01

    When the behaviour of a ship in waves is to be predicted it is convenient to have a tool which includes different approaches to the problem.The aim of this project is to develop such a tool named the strip theory module. The strip theory module will consist of submodules dependent on the I...

  20. The FPAX fastbus module

    International Nuclear Information System (INIS)

    Barlag, S.; Bouquet, B.; Lavigne, B.; Rypko, J.

    1989-07-01

    The FPAX is a Fastbus module with 4 independent, 2 slave and 2 master, ports on two segments. It operates as a normal master on either segment or as a Block-Mover on both. The processor board is based on a 68020 microprocessor. A local/network switch allows operation as a host or as a normal module on the Fastbus network

  1. Photovoltaic module and laminate

    Science.gov (United States)

    Bunea, Gabriela E.; Kim, Sung Dug; Kavulak, David F.J.

    2018-04-10

    A photovoltaic module is disclosed. The photovoltaic module has a first side directed toward the sun during normal operation and a second, lower side. The photovoltaic module comprises a perimeter frame and a photovoltaic laminate at least partially enclosed by and supported by the perimeter frame. The photovoltaic laminate comprises a transparent cover layer positioned toward the first side of the photovoltaic module, an upper encapsulant layer beneath and adhering to the cover layer, a plurality of photovoltaic solar cells beneath the upper encapsulant layer, the photovoltaic solar cells electrically interconnected, a lower encapsulant layer beneath the plurality of photovoltaic solar cells, the upper and lower encapsulant layers enclosing the plurality of photovoltaic solar cells, and a homogenous rear environmental protection layer, the rear environmental protection layer adhering to the lower encapsulant layer, the rear environmental protection layer exposed to the ambient environment on the second side of the photovoltaic module.

  2. Solar energy modulator

    Science.gov (United States)

    Hale, R. R. (Inventor); Mcdougal, A. R.

    1984-01-01

    A module is described with a receiver having a solar energy acceptance opening and supported by a mounting ring along the optic axis of a parabolic mirror in coaxial alignment for receiving solar energy from the mirror, and a solar flux modulator plate for varying the quantity of solar energy flux received by the acceptance opening of the module. The modulator plate is characterized by an annular, plate-like body, the internal diameter of which is equal to or slightly greater than the diameter of the solar energy acceptance opening of the receiver. Slave cylinders are connected to the modulator plate for supporting the plate for axial displacement along the axis of the mirror, therby shading the opening with respect to solar energy flux reflected from the surface of the mirror to the solar energy acceptance opening.

  3. Angiomyolipome rénal agressif avec extension à la veine rénale: à propos d'un cas et une revue de la littérature

    Science.gov (United States)

    Majdoub, Aziz El; Khallouk, Abdelhak; Farih, Moulay Hassan

    2017-01-01

    L'angiomyolipome rénal est une tumeur qui est reconnue bénigne. Elle présente trois composantes différentes: musculaire, vasculaire et graisseuse, dont la distribution est variable. Le diagnostic repose sur la mise en évidence de la composante graisseuse intra-tumorale en TDM ou IRM. Exceptionnellement la tumeur peut avoir un caractère agressive avec extension locorégionale et veineuse (la veine rénale et la veine cave inferieure). Nous présentons une observation d'une patiente âgée de 37 ans présentant un Angiomyolipome rénal volumineux avec extension à la veine rénale. PMID:29599888

  4. Multivariate Generalized Linear Mixed Models with High Complexity / Modèles linéaires généralisés mixtes multivariés avec complexité élevée

    DEFF Research Database (Denmark)

    Labouriau, Rodrigo

    . À titre d'exemple, je présenterai quelques applications à la génétique quantitative avec complexité élevée (plusieurs centaines de milliers d'observations et des pedigrees profonds). Dans toutes les applications présentées, il est essentiel de comprendre le processus stochastique sous-jacent associé...

  5. Photovoltaic module and interlocked stack of photovoltaic modules

    Science.gov (United States)

    Wares, Brian S.

    2014-09-02

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame. A plurality of individual male alignment features and a plurality of individual female alignment features are included on each frame. Adjacent photovoltaic modules are interlocked by multiple individual male alignment features on a first module of the adjacent photovoltaic modules fitting into and being surrounded by corresponding individual female alignment features on a second module of the adjacent photovoltaic modules. Other embodiments, features and aspects are also disclosed.

  6. The ANTARES optical module

    Energy Technology Data Exchange (ETDEWEB)

    Amram, P.; Anghinolfi, M.; Anvar, S.; Ardellier-Desages, F.E.; Aslanides, E.; Aubert, J.-J.; Azoulay, R.; Bailey, D.; Basa, S.; Battaglieri, M.; Bellotti, R.; Benhammou, Y.; Bernard, F.; Berthier, R.; Bertin, V.; Billault, M.; Blaes, R.; Bland, R.W.; Blondeau, F.; Botton, N. de; Boulesteix, J.; Brooks, C.B.; Brunner, J.; Cafagna, F.; Calzas, A.; Capone, A.; Caponetto, L.; Carloganu, C.; Carmona, E.; Carr, J.; Carton, P.-H.; Cartwright, S.L.; Cassol, F.; Cecchini, S.; Ciacio, F.; Circella, M.; Compere, C.; Cooper, S.; Coyle, P.; Croquette, J.; Cuneo, S.; Danilov, M.; Dantzig, R. van; De Marzo, C.; DeVita, R.; Deck, P.; Destelle, J.-J.; Dispau, G.; Drougou, J.F.; Druillole, F.; Engelen, J.; Feinstein, F.; Festy, D.; Fopma, J.; Gallone, J.-M.; Giacomelli, G.; Goret, P.; Gosset, L.; Gournay, J.-F.; Heijboer, A.; Hernandez-Rey, J.J.; Herrouin, G.; Hubbard, J.R.; Jaquet, M.; Jong, M. de; Karolak, M.; Kooijman, P.; Kouchner, A.; Kudryavtsev, V.A.; Lachartre, D.; Lafoux, H. E-mail: lafoux@cea.fr; Lamare, P.; Languillat, J.-C.; Laubier, L.; Laugier, J.-P.; Le Guen, Y.; Le Provost, H.; Le Van Suu, A.; Lemoine, L.; Lo Nigro, L.; Lo Presti, D.; Loucatos, S.; Louis, F.; Lyashuk, V.; Magnier, P.; Marcelin, M.; Margiotta, A.; Massol, A.; Masullo, R.; Mazeas, F.; Mazeau, B.; Mazure, A.; McMillan, J.E.; Michel, J.L.; Migneco, E.; Millot, C.; Mols, P.; Montanet, F.; Montaruli, T.; Morel, J.P.; Moscoso, L.; Musumeci, M.; Navas, S.; Nezri, E.; Nooren, G.J.; Oberski, J.; Olivetto, C.; Oppelt-Pohl, A.; Palanque-Delabrouille, N.; Papaleo, R.; Payre, P.; Perrin, P.; Petruccetti, M.; Petta, C.; Piattelli, P.; Poinsignon, J.; Potheau, R.; Queinec, Y.; Racca, C.; Raia, G.; Randazzo, N.; Rethore, F.; Riccobene, G.; Ricol, J.-S.; Ripani, M.; Roca-Blay, V.; Rolin, J.F.; Rostovstev, A.; Russo, G.V.; Sacquin, Y.; Salusti, E.; Schuller, J.-P.; Schuster, W.; Soirat, J.-P.; Souvorova, O.; Spooner, N.J.C.; Spurio, M.; Stolarczyk, T.; Stubert, D.; Taiuti, M.; Tao, C.; Tayalati, Y.; Thompson, L.F.

    2002-05-21

    The ANTARES collaboration is building a deep sea neutrino telescope in the Mediterranean Sea. This detector will cover a sensitive area of typically 0.1 km{sup 2} and will be equipped with about 1000 optical modules. Each of these optical modules consists of a large area photomultiplier and its associated electronics housed in a pressure resistant glass sphere. The design of the ANTARES optical module, which is a key element of the detector, has been finalized following extensive R and D studies and is reviewed here in detail.

  7. The ANTARES optical module

    International Nuclear Information System (INIS)

    Amram, P.; Anghinolfi, M.; Anvar, S.; Ardellier-Desages, F.E.; Aslanides, E.; Aubert, J.-J.; Azoulay, R.; Bailey, D.; Basa, S.; Battaglieri, M.; Bellotti, R.; Benhammou, Y.; Bernard, F.; Berthier, R.; Bertin, V.; Billault, M.; Blaes, R.; Bland, R.W.; Blondeau, F.; Botton, N. de; Boulesteix, J.; Brooks, C.B.; Brunner, J.; Cafagna, F.; Calzas, A.; Capone, A.; Caponetto, L.; Carloganu, C.; Carmona, E.; Carr, J.; Carton, P.-H.; Cartwright, S.L.; Cassol, F.; Cecchini, S.; Ciacio, F.; Circella, M.; Compere, C.; Cooper, S.; Coyle, P.; Croquette, J.; Cuneo, S.; Danilov, M.; Dantzig, R. van; De Marzo, C.; DeVita, R.; Deck, P.; Destelle, J.-J.; Dispau, G.; Drougou, J.F.; Druillole, F.; Engelen, J.; Feinstein, F.; Festy, D.; Fopma, J.; Gallone, J.-M.; Giacomelli, G.; Goret, P.; Gosset, L.; Gournay, J.-F.; Heijboer, A.; Hernandez-Rey, J.J.; Herrouin, G.; Hubbard, J.R.; Jaquet, M.; Jong, M. de; Karolak, M.; Kooijman, P.; Kouchner, A.; Kudryavtsev, V.A.; Lachartre, D.; Lafoux, H.; Lamare, P.; Languillat, J.-C.; Laubier, L.; Laugier, J.-P.; Le Guen, Y.; Le Provost, H.; Le Van Suu, A.; Lemoine, L.; Lo Nigro, L.; Lo Presti, D.; Loucatos, S.; Louis, F.; Lyashuk, V.; Magnier, P.; Marcelin, M.; Margiotta, A.; Massol, A.; Masullo, R.; Mazeas, F.; Mazeau, B.; Mazure, A.; McMillan, J.E.; Michel, J.L.; Migneco, E.; Millot, C.; Mols, P.; Montanet, F.; Montaruli, T.; Morel, J.P.; Moscoso, L.; Musumeci, M.; Navas, S.; Nezri, E.; Nooren, G.J.; Oberski, J.; Olivetto, C.; Oppelt-Pohl, A.; Palanque-Delabrouille, N.; Papaleo, R.; Payre, P.; Perrin, P.; Petruccetti, M.; Petta, C.; Piattelli, P.; Poinsignon, J.; Potheau, R.; Queinec, Y.; Racca, C.; Raia, G.; Randazzo, N.; Rethore, F.; Riccobene, G.; Ricol, J.-S.; Ripani, M.; Roca-Blay, V.; Rolin, J.F.; Rostovstev, A.; Russo, G.V.; Sacquin, Y.; Salusti, E.; Schuller, J.-P.; Schuster, W.; Soirat, J.-P.; Souvorova, O.; Spooner, N.J.C.; Spurio, M.; Stolarczyk, T.; Stubert, D.; Taiuti, M.; Tao, C.; Tayalati, Y.; Thompson, L.F.; Tilav, S.; Triay, R.; Valente, V.; Varlamov, I.; Vaudaine, G.; Vernin, P.; Witt Huberts, P. de; Wolf, E. de; Zakharov, V.; Zavatarelli, S.; D Zornoza, J. de; Zuniga, J.

    2002-01-01

    The ANTARES collaboration is building a deep sea neutrino telescope in the Mediterranean Sea. This detector will cover a sensitive area of typically 0.1 km 2 and will be equipped with about 1000 optical modules. Each of these optical modules consists of a large area photomultiplier and its associated electronics housed in a pressure resistant glass sphere. The design of the ANTARES optical module, which is a key element of the detector, has been finalized following extensive R and D studies and is reviewed here in detail

  8. The ANTARES Optical Module

    CERN Document Server

    Amram, P; Anvar, S; Ardellier-Desages, F E; Aslanides, Elie; Aubert, Jean-Jacques; Azoulay, R; Bailey, D; Basa, S; Battaglieri, M; Bellotti, R; Benhammou, Ya; Bernard, F; Berthier, R; Bertin, V; Billault, M; Blaes, R; Bland, R W; Blondeau, F; De Botton, N R; Boulesteix, J; Brooks, B; Brunner, J; Cafagna, F; Calzas, A; Capone, A; Caponetto, L; Cârloganu, C; Carmona, E; Carr, J; Carton, P H; Cartwright, S L; Cassol, F; Cecchini, S; Ciacio, F; Circella, M; Compere, C; Cooper, S; Coyle, P; Croquette, J; Cuneo, S; Danilov, M; Van Dantzig, R; De Marzo, C; De Vita, R; Deck, P; Destelle, J J; Dispau, G; Drougou, J F; Druillole, F; Engelen, J; Feinstein, F; Festy, D; Fopma, J; Gallone, J M; Giacomelli, G; Goret, P; Gosset, L G; Gournay, J F; Heijboer, A; Hernández-Rey, J J; Herrouin, G; Hubbard, John R; Jacquet, M; De Jong, M; Karolak, M; Kooijman, P M; Kouchner, A; Kudryavtsev, V A; Lachartre, D; Lafoux, H; Lamare, P; Languillat, J C; Laubier, L; Laugier, J P; Le Guen, Y; Le Provost, H; Le Van-Suu, A; Lemoine, L; Lo Nigro, L; Lo Presti, D; Loucatos, Sotirios S; Louis, F; Lyashuk, V I; Magnier, P; Marcelin, M; Margiotta, A; Massol, A; Masullo, R; Mazéas, F; Mazeau, B; Mazure, A; McMillan, J E; Michel, J L; Migneco, E; Millot, C; Mols, P; Montanet, François; Montaruli, T; Morel, J P; Moscoso, L; Navas, S; Nezri, E; Nooren, G J L; Oberski, J; Olivetto, C; Oppelt-pohl, A; Palanque-Delabrouille, Nathalie; Payre, P; Perrin, P; Petruccetti, M; Petta, P; Piattelli, P; Poinsignon, J; Popa, V; Potheau, R; Queinec, Y; Racca, C; Raia, G; Randazzo, N; Rethore, F; Riccobene, G; Ricol, J S; Ripani, M; Roca-Blay, V; Rolin, J F; Rostovtsev, A A; Russo, G V; Sacquin, Yu; Salusti, E; Schuller, J P; Schuster, W; Soirat, J P; Suvorova, O; Spooner, N J C; Spurio, M; Stolarczyk, T; Stubert, D; Taiuti, M; Tao, Charling; Tayalati, Y; Thompson, L F; Tilav, S; Triay, R; Valente, V; Varlamov, I; Vaudaine, G; Vernin, P; De Witt-Huberts, P K A; De Wolf, E; Zakharov, V; Zavatarelli, S; De Dios-Zornoza-Gomez, Juan; Zúñiga, J

    2002-01-01

    The ANTARES collaboration is building a deep sea neutrino telescope in the Mediterranean Sea. This detector will cover a sensitive area of typically 0.1 km-squared and will be equipped with about 1000 optical modules. Each of these optical modules consists of a large area photomultiplier and its associated electronics housed in a pressure resistant glass sphere. The design of the ANTARES optical module, which is a key element of the detector, has been finalized following extensive R & D studies and is reviewed here in detail.

  9. Frames in super Hilbert modules

    Directory of Open Access Journals (Sweden)

    Mehdi Rashidi-Kouchi

    2018-01-01

    Full Text Available In this paper, we define super Hilbert module and investigate frames in this space. Super Hilbert modules are  generalization of super Hilbert spaces in Hilbert C*-module setting. Also, we define frames in a super Hilbert module and characterize them by using of the concept of g-frames in a Hilbert C*-module. Finally, disjoint frames in Hilbert C*-modules are introduced and investigated.

  10. Des monastères aux funérailles. La construction d’une relation ethnographique avec des chrétiennes de Damas (Syrie

    Directory of Open Access Journals (Sweden)

    Anna Poujeau

    2009-03-01

    Full Text Available Des monastères aux funérailles. La construction d’une relation ethnographique avec des chrétiennes de Damas (Syrie. En juillet 2004, j’ai assisté aux funérailles d’un jeune homme de la famille au sein de laquelle je vivais à Damas. À l’époque, l’intense émotion suscitée par cet événement empêcha que je m’y intéresse de plus près. Ce n’est que deux ans plus tard, en juillet 2006, que j’ai décidé d’enquêter sur l’un des aspects majeurs de la cérémonie : les lamentations funèbres féminines. Lors de ce dernier terrain, les femmes de la famille que j’interrogeais, que j’accompagnais aux funérailles et dont j’enregistrais les chants m’assignèrent alors une place tout à fait particulière. Puisque, moi aussi, « je m’habillais en noir et je venais aux funérailles », je ne pouvais plus être considérée comme une étrangère. Dès lors, elles firent de moi la fille d’une de leur sœur émigrée à Paris et mariée avec un Français. Ce statut me fut par ailleurs confirmé lorsqu’elles m’attribuèrent une place dans leurs plaisanteries entre sœurs, tantes et neveux matrilatéraux.Dans cet article, je souhaite engager une double réflexion : sur la position et l’implication de l’ethnologue sur un terrain où l’émotion est au premier plan, ainsi que sur la façon dont être assignée à une place dans la parenté de ses informateurs donne enfin toute liberté d’action à l’ethnologue sur son terrain.From monasteries to funerals. The construction of ethnographical relations with the Christians of Damascus (Syria. In July 2004, I attended the funeral of a young man from the family with whom I was staying in Damascus. At the time, the intense emotion provoked by that event prevented me from immediately examining it more closely. It was only two years later, in July 2006, that I decided to study one of the main features of the ceremony: the women’s lamentations. During this

  11. A photovoltaic module

    DEFF Research Database (Denmark)

    2013-01-01

    The present invention relates to a photovoltaic module comprising a carrier substrate, said carrier substrate carrying a purely printed structure comprising printed positive and negative module terminals, a plurality of printed photovoltaic cell units each comprising one or more printed...... photovoltaic cells, wherein the plurality of printed photovoltaic cell units are electrically connected in series between the positive and the negative module terminals such that any two neighbouring photovoltaic cell units are electrically connected by a printed interconnecting electrical conductor....... The carrier substrate comprises a foil and the total thickness of the photovoltaic module is below 500 [mu]m. Moreover, the nominal voltage level between the positive and the negative terminals is at least 5 kV DC....

  12. Strain-Modulated Epitaxy

    National Research Council Canada - National Science Library

    Brown, April

    1999-01-01

    Strain-Modulated Epitaxy (SME) is a novel approach, invented at Georgia Tech, to utilize subsurface stressors to control strain and therefore material properties and growth kinetics in the material above the stressors...

  13. Solid state detector module

    International Nuclear Information System (INIS)

    Hoffman, D. M.

    1985-01-01

    A solid state detector in which each scintillator is optimally configured and coupled with its associated sensing diode in a way which exploits light piping effects to enhance efficiency, and at the same time provide a detector which is modular in nature. To achieve light piping, the scintillator crystal is oriented such that its sides conform with the crystal cleavage plane, and the sides are highly polished. An array of tungsten collimator plates define the individual channels. Multi-channel scintillator/diode modules are mounted behind and in registry with the plurality of collimator plates. A plurality of scintillators are bonded together after coating the surfaces thereof to minimize optical crosstalk. After lapping the face of the scintillator module, it is then bonded to a diode module with individual scintillators in registration with individual diodes. The module is then positioned in the detector array with collimator plates at the junctions between the scintillators

  14. Periodically modulated dark states

    Science.gov (United States)

    Han, Yingying; Zhang, Jun; Zhang, Wenxian

    2018-04-01

    Phenomena of electromagnetically induced transparency (PEIT) may be interpreted by the Autler-Townes Splitting (ATS), where the coupled states are split by the coupling laser field, or by the quantum destructive interference (QDI), where the atomic phases caused by the coupling laser and the probe laser field cancel. We propose modulated experiments to explore the PEIT in an alternative way by periodically modulating the coupling and the probe fields in a Λ-type three-level system initially in a dark state. Our analytical and numerical results rule out the ATS interpretation and show that the QDI interpretation is more appropriate for the modulated experiments. Interestingly, dark state persists in the double-modulation situation where control and probe fields never occur simultaneously, which is significant difference from the traditional dark state condition. The proposed experiments are readily implemented in atomic gases, artificial atoms in superconducting quantum devices, or three-level meta-atoms in meta-materials.

  15. Nestor optical modules blackening

    International Nuclear Information System (INIS)

    Cordelli, M.; Rutili, A.; Trasatti, L.

    1998-09-01

    The optical modules (OM) containing the photomultiplier tubes (PM) for a deep sea neutrino telescope must be protected them from direct sunlight. The problem has been solved using a heat shrink plastic sheet with very good optical and mechanical properties

  16. INFLUENCE DES TEMPERATURES OPERATIONNELLES SUR LA PERFORMANCE D’UN REFRIGERATEUR SOLAIRE A ADSORPTION QUI FONCTIONNE AVEC LE COUPLE CHARBON ACTIF-METHANOL

    Directory of Open Access Journals (Sweden)

    H SOUALMI

    2014-12-01

    Full Text Available Le séchage des produits alimentaires au soleil est un moyen efficace, facile et économique pour conserver les aliments, en particulier les fruits. Le séchoir solaire est l'équipement le plus populaire pour le séchage des fruits. En raison de la nature intermittente de l'énergie solaire, le stockage de l'énergie thermique est nécessaire pour assurer un fonctionnement prolongé du séchoir. L'objectif principal de cette étude est d'évaluer l'efficacité du séchoir solaire intégré avec un lit en gravier comme stockage thermique. L’air dans ce séchoir est sucé naturellement grâce à la cheminé solaire le séchage. Le cabinet de séchage est envisagé théoriquement (CFD.La distribution de la vitesse et de la température de l'air à travers le séchoir solaire ont été présentés durant une journée d’Août et sous les conditions climatiques de Tlemcen (Algérie. L’effet de la présence d'un stockage thermique sur la distribution de la vitesse et de la température du flux d'air et de la température des figues ont été analysés. Les résultats montrent que la conception du séchoir solaire, comportant un stockage thermique augmente les capacités et le rendement du séchoir solaire, par l’augmentation du temps de séchage.

  17. Programmable synchronous communications module

    International Nuclear Information System (INIS)

    Horelick, D.

    1979-10-01

    The functional characteristics of a programmable, synchronous serial communications CAMAC module with buffering in block format are described. Both bit and byte oriented protocols can be handled in full duplex depending on the program implemented. The main elements of the module are a Signetics 2652 Multi-Protocol Communications Controller, a Zilog Z-808 8 bit microprocessor with PROM and RAM, and FIFOs for buffering

  18. Groups, rings, modules

    CERN Document Server

    Auslander, Maurice

    2014-01-01

    This classic monograph is geared toward advanced undergraduates and graduate students. The treatment presupposes some familiarity with sets, groups, rings, and vector spaces. The four-part approach begins with examinations of sets and maps, monoids and groups, categories, and rings. The second part explores unique factorization domains, general module theory, semisimple rings and modules, and Artinian rings. Part three's topics include localization and tensor products, principal ideal domains, and applications of fundamental theorem. The fourth and final part covers algebraic field extensions

  19. Modulated Current Drive Measurements

    International Nuclear Information System (INIS)

    Petty, C.C.; Lohr, J.; Luce, T.C.; Prater, R.; Cox, W.A.; Forest, C.B.; Jayakumar, R.J.; Makowski, M.A.

    2005-01-01

    A new measurement approach is presented which directly determines the noninductive current profile from the periodic response of the motional Stark effect (MSE) signals to the slow modulation of the external current drive source. A Fourier transform of the poloidal magnetic flux diffusion equation is used to analyze the MSE data. An example of this measurement technique is shown using modulated electron cyclotron current drive (ECCD) discharges from the DIII-D tokamak

  20. Directed network modules

    International Nuclear Information System (INIS)

    Palla, Gergely; Farkas, Illes J; Pollner, Peter; Derenyi, Imre; Vicsek, Tamas

    2007-01-01

    A search technique locating network modules, i.e. internally densely connected groups of nodes in directed networks is introduced by extending the clique percolation method originally proposed for undirected networks. After giving a suitable definition for directed modules we investigate their percolation transition in the Erdos-Renyi graph both analytically and numerically. We also analyse four real-world directed networks, including Google's own web-pages, an email network, a word association graph and the transcriptional regulatory network of the yeast Saccharomyces cerevisiae. The obtained directed modules are validated by additional information available for the nodes. We find that directed modules of real-world graphs inherently overlap and the investigated networks can be classified into two major groups in terms of the overlaps between the modules. Accordingly, in the word-association network and Google's web-pages, overlaps are likely to contain in-hubs, whereas the modules in the email and transcriptional regulatory network tend to overlap via out-hubs

  1. Second generation SLAC modulator

    International Nuclear Information System (INIS)

    Donaldson, A.R.; Cron, J.C.; Hanselman, R.R.

    1986-06-01

    The Stanford Linear Accelerator Laboratory has undertaken the construction of a single pass electron-positron collider. In order to reach required beam energy 235 new klystrons needed upgraded modulator systems. The collider will use 50 GeV electrons and positrons. The increase in accelerator energy from the present 30 GeV necessitates the replacement of existing 35 MW klystrons with new 67 MW units. The doubling of klystron output power required a redesign of the modulator system. The 67 MW klystron needs a 350 kV beam voltage pulse with a 3.7 μs pulse width. A new pulse transformer was designed to deliver the increased voltage and pulse width. Pulse cable design was evaluated to obtain increased reliability of that critical element. The modulator, with the exception of its power supply, was rebuilt to produce the required power increase while enhancing reliability and improving maintainability. An investigation of present thyratron switch tube performance under the new operating conditions resulted in agitation and some warranted panic but these conditions were mitigated after several successful experiments and some evolutionary narrowing of the klystron pulse width. The discussion will cover the upgraded modulator system specifications and some details of the new pulse transformer tank, pulse cable, modulator, and modulator switch tube

  2. Decoupled Modulation Control

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Shaobu; Huang, Renke; Huang, Zhenyu; Diao, Ruisheng

    2016-06-03

    The objective of this research work is to develop decoupled modulation control methods for damping inter-area oscillations with low frequencies, so the damping control can be more effective and easier to design with less interference among different oscillation modes in the power system. A signal-decoupling algorithm was developed that can enable separation of multiple oscillation frequency contents and extraction of a “pure” oscillation frequency mode that are fed into Power System Stabilizers (PSSs) as the modulation input signals. As a result, instead of introducing interferences between different oscillation modes from the traditional approaches, the output of the new PSS modulation control signal mainly affects only one oscillation mode of interest. The new decoupled modulation damping control algorithm has been successfully developed and tested on the standard IEEE 4-machine 2-area test system and a minniWECC system. The results are compared against traditional modulation controls, which demonstrates the validity and effectiveness of the newly-developed decoupled modulation damping control algorithm.

  3. Superstability for Generalized Module Left Derivations and Generalized Module Derivations on a Banach Module (I

    Directory of Open Access Journals (Sweden)

    Rassias JM

    2009-01-01

    Full Text Available We discuss the superstability of generalized module left derivations and generalized module derivations on a Banach module. Let be a Banach algebra and a Banach -module, and . The mappings , and are defined and it is proved that if (resp., is dominated by then is a generalized (resp., linear module- left derivation and is a (resp., linear module- left derivation. It is also shown that if (resp., is dominated by then is a generalized (resp., linear module- derivation and is a (resp., linear module- derivation.

  4. Rechercher avec Google : quelques conseils

    OpenAIRE

    Ginouvès, Véronique

    2004-01-01

    Quoi de neuf ? (août 2006) : Toute la recherche Google sur une seule page : Le Googdesk : http://googdesk.com/ Google Trends Google Trends est un outil d'analyse de mots ou expressions clés, censé vous permettre de voir ce que le monde cherche ("See what the world is searching for''). Il compare et analyse dans un graphique l’usage et le comportement des mots clés dans le moteur sur deux années en arrière, et il spécifie cette utilisation par ville, pays et langue. http://www.google.com/tr...

  5. Le temps avec les autres

    Directory of Open Access Journals (Sweden)

    Grégori Jean

    2010-06-01

    Full Text Available The article follows the mutation suffered by the issue of alterity from Husserl to Heidegger and from Heidegger to Lévinas, envisaging it starting from temporality. We aim at replacing the question “Where is the other?” – that betrays the spatializing presuppositions of description – with “When is the other?” that can be clarified starting from the question “When are we together?”. Rather than deducing from the issue of co-presence, the final postponement of all attempt to conceive intersubjectivity in terms of contemporaneity, we subject it to an analysis that raises again the theme of world-time starting from an attention that testifies to the multiple layers thatconstitute temporality and the plurality of durations that intertwine in it.

  6. Pulse power modulators - an overview

    International Nuclear Information System (INIS)

    Venkatramani, N.

    2006-01-01

    Pulse power modulators are electronic devices to provide, high voltage, high current, power bursts. Ideally, a modulator, with the means to shape and control the pulses, acts as a switch between a high voltage power supply and its load. This article gives an overview of the pulse power modulators: starting with the basics of pulse and modulation, it covers modulation topologies, different types of modulators, major subsystems and pulse measurement techniques. The various applications of pulse power modulators and the recent trends have been included at the end. (author)

  7. Spatial Terahertz Modulator

    Science.gov (United States)

    Xie, Zhenwei; Wang, Xinke; Ye, Jiasheng; Feng, Shengfei; Sun, Wenfeng; Akalin, Tahsin; Zhang, Yan

    2013-11-01

    Terahertz (THz) technology is a developing and promising candidate for biological imaging, security inspection and communications, due to the low photon energy, the high transparency and the broad band properties of the THz radiation. However, a major encountered bottleneck is lack of efficient devices to manipulate the THz wave, especially to modulate the THz wave front. A wave front modulator should allow the optical or electrical control of the spatial transmission (or reflection) of an input THz wave and hence the ability to encode the information in a wave front. Here we propose a spatial THz modulator (STM) to dynamically control the THz wave front with photo-generated carriers. A computer generated THz hologram is projected onto a silicon wafer by a conventional spatial light modulator (SLM). The corresponding photo-generated carrier spatial distribution will be induced, which forms an amplitude hologram to modulate the wave front of the input THz beam. Some special intensity patterns and vortex beams are generated by using this method. This all-optical controllable STM is structure free, high resolution and broadband. It is expected to be widely used in future THz imaging and communication systems.

  8. Bunch identification module

    International Nuclear Information System (INIS)

    Fox, J.D.

    1981-01-01

    This module provides bunch identification and timing signals for the PEP Interaction areas. Timing information is referenced to the PEP master oscillator, and adjusted in phase as a function of region. Identification signals are generated in a manner that allows observers in all interaction regions to agree on an unambiguous bunch identity. The module provides bunch identification signals via NIM level logic, upon CAMAC command, and through LED indicators. A front panel ''region select'' switch allows the same module to be used in all regions. The module has two modes of operation: a bunch identification mode and a calibration mode. In the identification mode, signals indicate which of the three bunches of electrons and positrons are interacting, and timing information about beam crossing is provided. The calibration mode is provided to assist experimenters making time of flight measurements. In the calibration mode, three distinct gating signals are referenced to a selected bunch, allowing three timing systems to be calibrated against a common standard. Physically, the bunch identifier is constructed as a single width CAMAC module. 2 figs., 1 tab

  9. Integrated unaligned resonant modulator tuning

    Energy Technology Data Exchange (ETDEWEB)

    Zortman, William A.; Lentine, Anthony L.

    2017-10-03

    Methods and systems for tuning a resonant modulator are disclosed. One method includes receiving a carrier signal modulated by the resonant modulator with a stream of data having an approximately equal number of high and low bits, determining an average power of the modulated carrier signal, comparing the average power to a predetermined threshold, and operating a tuning device coupled to the resonant modulator based on the comparison of the average power and the predetermined threshold. One system includes an input structure, a plurality of processing elements, and a digital control element. The input structure is configured to receive, from the resonant modulator, a modulated carrier signal. The plurality of processing elements are configured to determine an average power of the modulated carrier signal. The digital control element is configured to operate a tuning device coupled to the resonant modulator based on the average power of the modulated carrier signal.

  10. Power module assembly

    Science.gov (United States)

    Campbell, Jeremy B [Torrance, CA; Newson, Steve [Redondo Beach, CA

    2011-11-15

    A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

  11. Waveform Sampler CAMAC Module

    International Nuclear Information System (INIS)

    Freytag, D.R.; Haller, G.M.; Kang, H.; Wang, J.

    1985-09-01

    A Waveform Sampler Module (WSM) for the measurement of signal shapes coming from the multi-hit drift chambers of the SLAC SLC detector is described. The module uses a high speed, high resolution analog storage device (AMU) developed in collaboration between SLAC and Stanford University. The AMU devices together with high speed TTL clocking circuitry are packaged in a hybrid which is also suitable for mounting on the detector. The module is in CAMAC format and provides eight signal channels, each recording signal amplitude versus time in 512 cells at a sampling rate of up to 360 MHz. Data are digitized by a 12-bit ADC with a 1 μs conversion time and stored in an on-board memory accessible through CAMAC

  12. GREET Pretreatment Module

    Energy Technology Data Exchange (ETDEWEB)

    Adom, Felix K. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Dunn, Jennifer B. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Han, Jeongwoo [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division

    2014-09-01

    A wide range of biofuels and biochemicals can be produced from cellulosic biomass via different pretreatment technologies that yield sugars. Process simulations of dilute acid and ammonia fiber expansion pretreatment processes and subsequent hydrolysis were developed in Aspen Plus for four lignocellulosic feedstocks (corn stover, miscanthus, switchgrass, and poplar). This processing yields sugars that can be subsequently converted to biofuels or biochemical. Material and energy consumption data from Aspen Plus were then compiled in a new Greenhouses Gases, Regulated Emissions, and Energy Use in Transportation (GREETTM) pretreatment module. The module estimates the cradle-to-gate fossil energy consumption (FEC) and greenhouse gas (GHG) emissions associated with producing fermentable sugars. This report documents the data and methodology used to develop this module and the cradle-to-gate FEC and GHG emissions that result from producing fermentable sugars.

  13. Space Experiment Module (SEM)

    Science.gov (United States)

    Brodell, Charles L.

    1999-01-01

    The Space Experiment Module (SEM) Program is an education initiative sponsored by the National Aeronautics and Space Administration (NASA) Shuttle Small Payloads Project. The program provides nationwide educational access to space for Kindergarten through University level students. The SEM program focuses on the science of zero-gravity and microgravity. Within the program, NASA provides small containers or "modules" for students to fly experiments on the Space Shuttle. The experiments are created, designed, built, and implemented by students with teacher and/or mentor guidance. Student experiment modules are flown in a "carrier" which resides in the cargo bay of the Space Shuttle. The carrier supplies power to, and the means to control and collect data from each experiment.

  14. CAMAC system test module

    International Nuclear Information System (INIS)

    Dawson, W.K.; Gjovig, A.; Naivar, F.; Potter, J.; Smith, W.

    1981-01-01

    Since the CAMAC Branch Highway is used to both send information to and receive information from a CAMAC crate, faults in this highway can be difficult to recognize and diagnose. Similarly faults caused by a Crate Controller corrupting either instructions or data are difficult to distinguish from faults caused by the modules themselves. The CLIVIT (CAMAC Logic Integrity Via Interactive Testing) module is designed to largely eliminate such difficulties and ambiguities by allowing the verification of Branch Highway and Dataway transactions via an independent data communication path. The principle of operation of the CLIVIT is explained. Described are the prototype construction, testing and use

  15. Instant node package module

    CERN Document Server

    Ali, Juzer

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. A practical exploration of the lifecycle of creating node modules as well as learning all of the top features that npm has to offer.Intended for readers who want to create their first node.js modules. The programming paradigm of JavaScript is not covered so a foundation in these concepts would be beneficial.

  16. Flexible programmable logic module

    Science.gov (United States)

    Robertson, Perry J.; Hutchinson, Robert L.; Pierson, Lyndon G.

    2001-01-01

    The circuit module of this invention is a VME board containing a plurality of programmable logic devices (PLDs), a controlled impedance clock tree, and interconnecting buses. The PLDs are arranged to permit systolic processing of a problem by offering wide data buses and a plurality of processing nodes. The board contains a clock reference and clock distribution tree that can drive each of the PLDs with two critically timed clock references. External clock references can be used to drive additional circuit modules all operating from the same synchronous clock reference.

  17. Œuvre 220 : Édouard Levé d’après Nicolas Brasseur - Entretien avec Olivier Sécardin

    Directory of Open Access Journals (Sweden)

    Olivier Sécardin

    2017-06-01

    Full Text Available Nicolas Brasseur, artiste, photographe, né en 1981 à Nantes. Vit et travaille à Paris. Diplômé de l’École Nationale Supérieure des Arts Décoratifs de Paris en 2008, Nicolas Brasseur poursuit un travail documentaire au sein d’institutions françaises autour de la notion « d’images modèles ». Ses recherches l’ont amené à photographier l’hôpital, l’école et plus récemment la prison en parte-nariat avec le Centre Photographique d’Ile-de-France (CPIF.Édouard Levé, écrivain, artiste, photographe, né en 1965, mort en 2007. Diplômé de l’ESSEC, il commence à peindre en 1991, puis brûle presque toutes ses toiles avant de se consacrer à la photographie. En 1999, il réalise sa première série, Homonymes, qui propose des portraits photographiques de personnes inconnues portant des noms célèbres : Georges Bataille, Yves Klein, Henri Michaux… Il reprend le même procédé dans Amérique (2006, reportage sur des villes américaines qui portent le nom d’autres villes connues : Florence, Berlin, Paris... Il est l’auteur de plusieurs séries photographiques. Admirateur de Raymond Roussel, lecteur de Jacques Roubaud et de Raymond Queneau, Édouard Levé est aussi écrivain. OEuvres, publié en 2002 est le catalogue de 533 projets d’oeuvres d’art, installations, peintures, sculptures ou photographies imaginés dont l’artiste a « eu l’idée, mais qu’il n’a pas réalisés ». Son Autoportrait le présente en « 1600 phrases sans solution de continuité ». Trois jours avant de se donner la mort, Édouard Levé dépose chez son éditeur le manuscrit de son dernier texte, Suicide (2008.

  18. Some results of a numerical calculation of plasma dispersion curves including collisions; Quelques resultats de calcul de courbes de dispersion avec collisions

    Energy Technology Data Exchange (ETDEWEB)

    Lepechinsky, D; Parlange, F [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Dispersion curves including the effect of collisions have been calculated with a 7090 IBM computer for several types of laboratory hydrogen plasmas; Te = Ti = 1 eV; Te = 1 eV, Ti = 0,1 eV; Te = 10 eV, Ti = 2 eV; Te = 50 eV, Ti 10 eV, with neutral gas pressures of 10{sup -1}, 10{sup -3} and 10{sup -4} mmHg and electron densities of 10{sup 10}, 10{sup 13} and eventually 10{sup 15} el/cc. The corresponding collision frequencies with neutrals and between electrons and ions have been derived using appropriate relationships The dispersion equations used correspond to the macroscopic treatment. The real and imaginary parts of the wave number K are presented as a function of real values of the frequency {omega}, for electrostatic and electromagnetic waves and for e.m. waves propagating parallel to a permanent magnetic field of 500 gauss and 12.5 Kgauss. (authors) [French] Des courbes de dispersion tenant compte de l'effet des collisions ont ete calculees a l'aide d'un ordinateur IBM 7090 pour differents types de plasmas d'hydrogene se presentant au laboratoire; les temperatures electroniques et ioniques envisagees ont ete les suivantes: Te = Ti = 1 Ev; Te = 1 eV, Ti 0,1 eV; Te = 10 eV, Ti = 2 eV; Te = 50 eV, Ti = 10 eV; les pressions de neutres - de 10{sup -1}, 10{sup -3} et 10{sup -4} mmHg; les densites electroniques - de 10{sup 10}, 10{sup 13} et eventuellement de 10{sup 15} el/cc. Les frequences de collision avec les neutres et entre electrons et ions ont ete evaluees en fonction de ces donnees. Les equations, de dispersion utilisees correspondant au traitement macroscopique. On presente les valeurs des parties reelle et imaginaire du nombre d'ondes K en fonction de valeurs reelles de la frequence {omega} pour les ondes electrostatiques et electromagnetiques et pour les ondes e.m. se propageant parallelement a un champ magnetique permanent de 500 gauss et de 12,5 kgauss. (auteurs)

  19. Compatibility of various magnesium alloys with pressurized carbon dioxide at high temperatures; Compatibilite de divers alliages de magnesium avec le gaz carbonique sous pression aux temperatures elevees

    Energy Technology Data Exchange (ETDEWEB)

    Dewanckel, B; David, R; Hulin, C; Leclercq, D [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

    1968-07-01

    This work on the compatibility of magnesium alloys with pressurized carbon dioxide has been carried out along three lines: - testing of special alloys containing additions of zirconium, manganese, cerium, zinc, beryllium and yttrium. The results are satisfactory, generally speaking, and the corrosion kinetics are often comparable to those of conventional magnesium-zirconium alloy; - influence of the quality of the carbon dioxide, in particular the presence of water vapour or of carbon monoxide in this gas. It appears that oxidation is reduced if the carbon dioxide contains traces of water vapour, but is more pronounced if carbon monoxide is also present; - study of certain phenomena related to corrosion: size changes in the samples during tests, structural modifications in the alloys (grain-size changes, formation of a cortical zone in the case of alloys containing zirconium). The influence of thermal cycling has also been studied in a few specific tests. The results obtained make it possible to compare the behaviour of various alloys under varying conditions of long-term use, and to choose, if required, the best composition for a given application. (authors) [French] Ce travail sur la compatibilite des alliages de magnesium avec le gaz carbonique sous pression a ete particulierement oriente dans trois directions: - epreuve, d'alliages speciaux comportant des additions de zirconium, manganese, cerium, zinc, beryllium et yttrium. Les resultats sont generalement satisfaisants et les cinetiques de corrosion souvent comparables a celles de l'alliage magnesium-zirconium classique; - influence de la qualite du gaz carbonique, et notamment de la presence de vapeur d'eau ou d'oxyde de carbone dans ce gaz. Il est apparu que l'oxydation est reduite si le gaz carbonique contient des traces d'eau, mais accrue si l'oxyde de carbone est egalement present; - etude de certains phenomenes lies a la corrosion: variations dimensionnelles des echantillons au cours des essais

  20. Combustion Modeling with the G-Equation Modélisation de la combustion avec l'équation de G

    Directory of Open Access Journals (Sweden)

    Peters N.

    2006-12-01

    Full Text Available Numerical investigations concerning the turbulent flame front propagation in Gasoline Direct Injection (GDI engines were made by implementing a flamelet model in the CFD code Fire. The advantage of this combustion model is the decoupling of the chemistry from the turbulent flow. For this purpose the combustion chamber has to be divided into a burned and an unburned area, which is realized by transporting a scalar field (G-Equation. The reference value defines the present averaged flame position. The complete reaction kinetics is calculated interactively with the CFD code in a one dimensional Representative Interactive Flamelet (RIF code. This combustion model was verified by simulating a 2. 0 l-2 V gasoline engine with homogeneous combustion where a parameter study was conducted to check the flamelet model for plausibility. Finally, the potential of this combustion model was investigated by simulating a hypothetical 2. 0 1-4 V GDI engine. Une investigation numérique relative à la propagation des fronts de flammes turbulents dans les moteurs à essence à injection directe (GDI a été menée en implantant un modèle de flameletdans le code 3D Fire. L'avantage de ce modèle de combustion est de découpler la chimie de l'écoulement turbulent en divisant la chambre de combustion en deux zones : brûlée et imbrûlée, à l'aide d'une équation de transport d'un scalaire (équation de G. Une valeur de référence de ce scalaire définit la position moyenne de la flamme. Une chimie complète est calculée interactivement avec le calcul 3D à l'aide d'un code monodimensionnel RIF (Representative Interactive Flamelet. Le modèle de combustion a été validé sur la simulation d'un moteur 2 litres à 2 soupapes en combustion homogène pour vérifier la représentativité de l'approche flamelet . Puis, le potentiel du modèle de combustion a été étudié en simulant un moteur modèle 2 litres 4 soupapes GDI.

  1. Du réel dans l'irréel : la formule hypothétique sans si et avec et

    Directory of Open Access Journals (Sweden)

    Adler Silvia

    2012-07-01

    Full Text Available Dans une perspective typologique, le mode conditionnel est très souvent associé à l'irrealis. Il en va de même de la construction hypothétique avec si. Pourtant, dans le domaine de l'imaginaire du présent ou du passé, le verbe principal peut être à l'indicatif quand il s'agit d'indiquer une conséquence infaillible, ce qui suggère que la conséquence peut se voir accorder un statut plus « réel » dans le cadre global de ce qui est toujours un non-fait au moment de l'énonciation. A part le recours à un moyen purement grammatical pour avancer l'idée d'une conséquence inévitable, fort probable ou imminente, il existe la possibilité de coordination de deux propositions (sans si, susceptibles de correspondre à des formules conditionnelles ou temporelles. Il en ressort que l'idée d'une conséquence plus facilement et inévitablement 'concrétisable' peut être promue aussi par un moyen lexical (en l'occurrence, la conjonction et. La possibilité de tels schémas suggère également que l'opposition binaire realis - irrealis n'est pas toujours opératoire : le fait de vouloir présenter certaines conséquences comme plus inévitables que d'autres indique une tendance à évaluer le côté « réel » de la conséquence. L'objectif de la présente étude est d'enquêter sur le modèle de la phrase conditionnelle dépourvue de l'adverbe hypothétique si dans la protase et contenant la conjonction de coordination et dans l'apodose pour évaluer sa part dans la relativisation de l'irréel.

  2. Photovoltaic module and interlocked stack of photovoltaic modules

    Science.gov (United States)

    Wares, Brian S.

    2012-09-04

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame having at least a top member and a bottom member. A plurality of alignment features are included on the top member of each frame, and a plurality of alignment features are included on the bottom member of each frame. Adjacent photovoltaic modules are interlocked by the alignment features on the top member of a lower module fitting together with the alignment features on the bottom member of an upper module. Other embodiments, features and aspects are also disclosed.

  3. 29 August 2013 - J.-F. Jauslin, Directeur de l’Office fédéral de la culture (OFC) Ambassadeur suisse auprès de l’UNESCO et de l’OIF au 1er septembre 2013 Confédération suisse visite le centre visiteurs de l’expérience ATLAS ainsi que la caverne expérimentale d'ATLAS avec P. Jenny, ancien Porte-parole d'ATLAS. M. Bona, Conseiller du Directeur général pour les relations avec les Organisations internationales présent tout au long.

    CERN Multimedia

    Jean-Claude Gadmer

    2013-01-01

    29 August 2013 - J.-F. Jauslin, Directeur de l’Office fédéral de la culture (OFC) Ambassadeur suisse auprès de l’UNESCO et de l’OIF au 1er septembre 2013 Confédération suisse visite le centre visiteurs de l’expérience ATLAS ainsi que la caverne expérimentale d'ATLAS avec P. Jenny, ancien Porte-parole d'ATLAS. M. Bona, Conseiller du Directeur général pour les relations avec les Organisations internationales présent tout au long.

  4. Modelling the Photovoltaic Module

    DEFF Research Database (Denmark)

    Katsanevakis, Markos

    2011-01-01

    This paper refers into various ways in simulation the Photovoltaic (PV) module behaviour under any combination of solar irradiation and ambient temperature. There are three different approaches presented here briefly and one of them is chosen because of its good accuracy and relatively low...

  5. Special Attachments. Module 19.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This module on special attachments, one in a series dealing with industrial sewing machines, their attachments, and operation, covers four topics: gauges; cording attachment; zipper foot; and hemming, shirring, and binding. For each topic these components are provided: an introduction, directions, an objective, learning activities, student…

  6. Special Operation. Module 20.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This module on special operations, one in a series dealing with industrial sewing machines, their attachments, and operation, covers two topics: topstitching and mitering. For each topic these components are provided: an introduction, directions, an objective, learning activities, student information, a student self-check, and a check-out…

  7. Barrel Module0 Autopsy

    CERN Document Server

    Cobal, M; Nessi, Marzio; Blanch, O; Zamora, Y

    1999-01-01

    Using the information from the Cs calibration runs, many of the problems affecting the response of the barrel Module0 prototype have been spotted out. These can be bad fibre-tile couplings, light losses from fibres bundling, broken fibres, not transparent tiles etc. After a visual inspection, most of these problems have been repaired.

  8. Rescue Manual. Module 6.

    Science.gov (United States)

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The sixth of 10 modules contains 4 chapters: (1) industrial rescue; (2) rescue from a confined space; (3) extrication from heavy equipment; and (4) rescue operations involving elevators. Key points, an introduction, and conclusion accompany…

  9. Evolutionary and developmental modules.

    Science.gov (United States)

    Lacquaniti, Francesco; Ivanenko, Yuri P; d'Avella, Andrea; Zelik, Karl E; Zago, Myrka

    2013-01-01

    The identification of biological modules at the systems level often follows top-down decomposition of a task goal, or bottom-up decomposition of multidimensional data arrays into basic elements or patterns representing shared features. These approaches traditionally have been applied to mature, fully developed systems. Here we review some results from two other perspectives on modularity, namely the developmental and evolutionary perspective. There is growing evidence that modular units of development were highly preserved and recombined during evolution. We first consider a few examples of modules well identifiable from morphology. Next we consider the more difficult issue of identifying functional developmental modules. We dwell especially on modular control of locomotion to argue that the building blocks used to construct different locomotor behaviors are similar across several animal species, presumably related to ancestral neural networks of command. A recurrent theme from comparative studies is that the developmental addition of new premotor modules underlies the postnatal acquisition and refinement of several different motor behaviors in vertebrates.

  10. Paratransit: An Instructional Module.

    Science.gov (United States)

    Scalici, Anthony

    A concept-based introduction to paratransit is provided in this instructional module for undergraduate and graduate transportation-related courses for disciplines such as engineering, business, marketing, and technology. The concept of paratransit generally refers to modes of transportation other than mass transit and solo-driven automobiles. The…

  11. Recommendations for a head and neck IMRT quality assurance protocol; Recommandations pour un protocole d'assurance de qualite de la radiotherapie conformationnelle avec modulation d'intensite des cancers de la tete et du cou

    Energy Technology Data Exchange (ETDEWEB)

    Zefkili, S. [Institut Curie, Service de Physique Medicale, 75 - Paris (France); Tomsej, M. [Cliniques Univ. Saint Luc, Service de Radiotherapie, Bruxelles (Belgium); Aletti, P.; Marchesi, V. [Centre Alexis-Vautrin, Unite de Radiophysique, 54 - Vandoeuvre-les-Nancy (France); Bidault, F. [Centre de Lutte Contre le Cancer Georges-Francois-Leclerc, Unite de Radiophysique, 21 - Dijon (France); Bridier, A. [Institut Gustave Roussy, 94 - Villejuif (France). Service de Radio-Physique; Marcie, S. [Centre Antoine-Lacassagne, Unite de Radiophysique, 06 - Nice (France)

    2004-12-01

    Head and neck tumors represent very interesting targets for IMRT techniques because of the complex shape of the structures and the organs at risk close by. The use of this kind of techniques requires a quality assurance protocol. The physicists of the GORTEC group shared their experience to define some recommendations in order to draw up a QA protocol. The dosimetric verification of the treatment plans (in terms of absolute and relative dose), the control of the reproducibility of the patient positioning and the use of a record and verify system to control the different parameters form the main parts of these recommendations. Each chapter comprises a description of the different methods, recommendations concerning the equipment, the adopted tolerances, the frequency of controls. At the end of each chapter, a table summarizes the main actions to carry out. These recommendations will allow to harmonize our practices whatever the softwares and the accelerator that are being used. They will simplify the task of the teams that wish to implement IMRT for head and neck tumors. (author)

  12. Dynamic method for the measurement of Young'S modulus. Application to nuclear graphites; Methode de mesure dynamique du module d'Young. Application aux graphites nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Pattou, F; Trutt, J C

    1963-07-01

    selon un mode determine, une relation lineaire, module d'Young - densite apparente a ete mise en evidence. A densite apparente egale, des graphites realises avec des produits de base differents possedent generalement des modules d'Young differents en relation avec les caracteristiques cristallines du materiau. Les mesures du module de rigidite C faites sur differents graphites, montrent egalement l'influence de l'orientation des cristallites. (auteurs)

  13. Des lieux avec lesquels penser, des livres auxquels penser Places to think with, books to think about Lugares para pensar con ellos, Libros para pensar en ellos

    Directory of Open Access Journals (Sweden)

    Anders Burman

    2012-06-01

    marcha por la administración de Evo Morales. En esta presentación, llego a preguntar: si los libros y las conferencias son asuntos/cuestiones de opinión y juicios personales y que el verdadero saber sólo puede ser adquirido por la experiencia no-linguística, en interrelación con y en el mundo, el proyecto de descolonización del saber y de universidades justamente usando herramientas como libros y conferencias, ¿ no sería éste un proyecto logocéntrico de descolonización, una empresa creada y destinada a la reproducción de asimetrías epistemológicas coloniales de producción del saber ? Por una parte, este trabajo subraya problemas ligados a la naturaleza ‘siwsawi’ del saber académico convencional (colonial con respeto al proceso crítico de descolonización. Por otro lado, explora la naturaleza ‘ukamaw’ del saber experimental y la perspectiva para este tipo de saber, de establecer los fundamentos de una transformación epistemológicas decolonial de la Universidad Boliviana. Fundamentalmente, este trabajo permite reflexionar sobre lo que significa adquirir conocimientos, ser sujeto y objeto de conocimiento en los Andes bolivianos hoy en día, en un contexto donde las tradiciones subalternizadas del pensamiento han tomado un rumbo importante/ urgente en las recientes dinámicas educativas y políticas y donde las distintas visiones y reivindicaciones de la verdad coexisten, fusionan y chocan.Beaucoup d’hommes et de femmes aymara affirment que le savoir humain, transmis par la langue, n’est qu’un pur ‘siwsawi’, i.e. des paroles, des opinions, des points de vue, des jugements d’individus particuliers. Ainsi, il s’agit d’un savoir particulier ; c’est une connaissance concernant l’opinion de certaines personnes, rien de plus. Ceci est, de manière significative, différent du savoir non-linguistique, du savoir expérimental qui est vécu à travers et acquis dans, par, avec et au sein du monde. Ce type de savoir est

  14. Young module multiplicities and classifying the indecomposable Young permutation modules

    OpenAIRE

    Gill, Christopher C.

    2012-01-01

    We study the multiplicities of Young modules as direct summands of permutation modules on cosets of Young subgroups. Such multiplicities have become known as the p-Kostka numbers. We classify the indecomposable Young permutation modules, and, applying the Brauer construction for p-permutation modules, we give some new reductions for p-Kostka numbers. In particular we prove that p-Kostka numbers are preserved under multiplying partitions by p, and strengthen a known reduction given by Henke, c...

  15. Potential interest to combine an intensity modulated conformal radiotherapy (I.M.C.R.T.) with a daily repositioning on intra-prostate implants to reduce sexual toxicity induced by exclusive irradiation of prostate cancers; Interets potentiels de combiner une radiotherapie de conformation avec modulation d'intensite (RCMI) avec un repositionnement journalier sur implants intraprostatiques pour reduire la toxicite sexuelle induite par l'irradiation exclusive des cancers de prostate

    Energy Technology Data Exchange (ETDEWEB)

    Chapet, O.; Sotton, M.P.; Vial, L.; Belliere, A.; Ardiet, J.M.; Mornex, F.; Sentenac, I.; Romestaing, P. [Centre Hospitalier Lyon-Sud, Dept. de Radiotherapie-oncologie, 69 - Pierre-Benite (France); Bouffard, J. [Centre Hospitalier Lyon-Sud, Service de Radiologie, 69 - Pierre-Benite (France)

    2007-11-15

    A reduction in margins defining the forecast target volume thanks to a daily repositioning on intra prostate implants would reduce the doses delivered to the penis bulb, corpora cavernosa penis and a. pudendae internae left and right. An optimization of the I.M.C.R.T. on the same anatomical structures amplifies this earnings. The combination of the two could improve the sexual preservation and be proposed for patients with favourable stage prostate cancer. A study of Phase 2 begins soon. (N.C.)

  16. Use of the statistical control of processes through checking before treatment realised with the ionization chamber and by electronic portal system of imaging (E.P.I.D.) in intensity modulated radiotherapy (I.M.R.T.); Utilisation de la maitrise statistique des processus dans le cadre des controles avant traitement realises avec la chambre d'ionisation et par systeme d'imagerie portale electronique (EPID) en radiotherapie conformationnelle avec modulation d'intensite (RCMI)

    Energy Technology Data Exchange (ETDEWEB)

    Villani, N.; Gerard, K.; Noel, A. [Nancy univ., Lab. de Recherche en Radiophysique, CRAN UMR 7039, CNRS, Centre Alexis-Vautrin, 54 - Vandoeuvre-les-Nancy (France); Marchesi, V.; Huger, S. [Centre Alexis-Vautrin, Unite de Radiophysique Medicale, 54 - Vandoeuvre-les-Nancy (France)

    2009-10-15

    The expected results are to demonstrate that it is possible to reduce the times devoted to the pre-treatment controls, while keeping an optimal safety, on substituting the measures of the ionization chamber by this one of the electronic portal imaging device (E.P.I.D.). (N.C.)

  17. Modulating aging and longevity

    DEFF Research Database (Denmark)

    Rattan, Suresh

    Provides information and an evaluation of a variety of approaches tried for modulating aging and longevity, including dietary supplementation with antioxidants, vitamins and hormones, genetic engineering, life-style alterations, and hormesis through mild stress. After decades of systematic collec....... The goal of research on ageing is not to increase human longevity regardless of the consequences, but to increase active longevity free from disability and functional dependence......Provides information and an evaluation of a variety of approaches tried for modulating aging and longevity, including dietary supplementation with antioxidants, vitamins and hormones, genetic engineering, life-style alterations, and hormesis through mild stress. After decades of systematic...... collection of data describing age-related changes in organisms, organs, tissues, cells and macromolecules, biogerontologists are now in a position to construct general principles of ageing and explore various possibilities of intervention using rational approaches. While not giving serious consideration...

  18. Weighted network modules

    International Nuclear Information System (INIS)

    Farkas, Illes; Abel, Daniel; Palla, Gergely; Vicsek, Tamas

    2007-01-01

    The inclusion of link weights into the analysis of network properties allows a deeper insight into the (often overlapping) modular structure of real-world webs. We introduce a clustering algorithm clique percolation method with weights (CPMw) for weighted networks based on the concept of percolating k-cliques with high enough intensity. The algorithm allows overlaps between the modules. First, we give detailed analytical and numerical results about the critical point of weighted k-clique percolation on (weighted) Erdos-Renyi graphs. Then, for a scientist collaboration web and a stock correlation graph we compute three-link weight correlations and with the CPMw the weighted modules. After reshuffling link weights in both networks and computing the same quantities for the randomized control graphs as well, we show that groups of three or more strong links prefer to cluster together in both original graphs

  19. Quad nanosecond delay module

    International Nuclear Information System (INIS)

    McDonald, R.J.; Hunter, J.B.; Wozniak, G.J.

    1986-04-01

    Four nanosecond (ns) delay units have been designed to fit in a single-width NIM module. This module is particularly suited for use in conjunction with quad constant fraction timing discriminators (CFTDs) since it has four delay units that can be placed adjacent to the four units of the CFTD. A series of different length cables connected via DIP toggle switches provide delays of 0.60 ns in 4 ns increments. Thus, the CFTD delay can be optimized for pulses of different rise times from approx.10-100 ns. Design work for the PC board and silkscreening of the front panel were done with the MacDraw program on the Apple Mackintosh computer and printed with the Lasewriter printer. 6 refs

  20. Silicon Optical Modulator Simulation

    Directory of Open Access Journals (Sweden)

    Soon Thor LIM

    2015-04-01

    Full Text Available We developed a way of predicting and analyzing high speed optical modulator. Our research adopted a bottom-up approach to consider high-speed optical links using an eye diagram. Our method leverages on modular mapping of electrical characteristics to optical characteristics, while attaining the required accuracy necessary for device footprint approaching sub-micron scales where electrical data distribution varies drastically. We calculate for the bias dependent phase shift (2pi/mm and loss (dB/mm for the optical modulator based on the real and imaginary part of complex effective indices. Subsequently, combine effectively both the electrical and optical profiles to construct the optical eye diagram which is the essential gist of signal integrity of such devices.

  1. Glucocorticoid receptor modulators.

    Science.gov (United States)

    Meijer, Onno C; Koorneef, Lisa L; Kroon, Jan

    2018-06-01

    The glucocorticoid hormone cortisol acts throughout the body to support circadian processes and adaptation to stress. The glucocorticoid receptor is the target of cortisol and of synthetic glucocorticoids, which are used widely in the clinic. Both agonism and antagonism of the glucocorticoid receptor may be beneficial in disease, but given the wide expression of the receptor and involvement in various processes, beneficial effects are often accompanied by unwanted side effects. Selective glucocorticoid receptor modulators are ligands that induce a receptor conformation that allows activation of only a subset of downstream signaling pathways. Such molecules thereby combine agonistic and antagonistic properties. Here we discuss the mechanisms underlying selective receptor modulation and their promise in treating diseases in several organ systems where cortisol signaling plays a role. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  2. Cfd Based Shape Optimization of Ic Engine Optimisation de l'admission et des chambres de combustion des moteurs avec la modélisation 3D

    Directory of Open Access Journals (Sweden)

    Griaznov V.

    2006-12-01

    'étudier avec beaucoup de détails les écoulements moteur. Cependant, elle offre encore une aide réduite à la modification des conduits d'admission ou des chambres pour contrôler ces écoulements afin d'obtenir les performances désirées. Cet article présente une méthodologie combinant le calcul 3D et des outils numériques robustes d'optimisation pour concevoir l'admission et la chambre de combustion, au lieu d'en évaluer seulement les performances.

  3. The reactions of magnesium and its alloys with moist gases at high temperatures; Les reactions du magnesium et de ses alliages avec les gaz humides aux temperatures elevees

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-02-15

    The kinetics and mechanisms of the reaction of pure or low alloyed magnesium with various gas saturated by water vapor: oxygen, argon, nitrogen, air, carbon dioxide, have been studied and compared in the temperature range 350-600 deg C. After picturing the large chemical reactivity of magnesium surface, the more or less properties of the oxide film, always made of magnesia, have been shown depending on the nature of the gas carrying water vapor; in fact, metal sublimation occurs the more easily as the surrounding atmosphere is less oxidizing. Moreover, an activation energy change is systematic, but at a temperature which depends also on the latter. In the case of the alloys, the linear oxidation rate is generally obtained only after short induction periods, parabolic in nature. Two possibilities of corrosion inhibition of magnesium by water vapor are then demonstrated and explained: either by a partial superficial fluoridation, or when the carrier gas is carbon dioxide. Also, the extreme conditions of oxidation were studied, that is the ignition processes that occur at a particular temperature in every gas mixture. Finally, it is tried to evolve the fundamental and practical significance of all the results. (author) [French] On a etudie et compare par voie thermogravimetrique, micrographique et radiocristallographique, les cinetiques et les mecanismes de reaction du magnesium et de certains de ses alliages avec diverses atmospheres saturees en vapeur d'eau: oxygene, argon, azote, air, gaz carbonique, dans un domaine de temperatures s'etendant de 350 a 600 deg C, Apres avoir illustre l'extreme sensibilite chimique de la surface du magnesium, on a tout d'abord montre que la valeur plus ou moins protectrice de la couche d'oxyde formee, pourtant toujours constituee de magnesie normale, depend de la nature du gaz porteur de la vapeur d'eau; en effet, la sublimation du metal intervient d'autant plus facilement que les atmospheres en presence sont moins oxydantes. De plus

  4. Le syndrome de fatigue chronique et la fibromyalgie au Canada : prévalence et associations avec six indicateurs de l'état de santé

    Directory of Open Access Journals (Sweden)

    C. Rusu

    2015-01-01

    Full Text Available Introduction : Peu d'études ont traité, à l'aide de données populationnelles, des facteurs associés de façon indépendante au syndrome de fatigue chronique (SFC et à la fibromyalgie (FM ou des répercussions de ces affections sur l'état de santé. Méthodologie : Nous avons utilisé les données de l'Enquête sur la santé dans les collectivités canadiennes de 2010 (n=59 101, représentative de la population à l'échelle nationale, pour décrire les cas autodéclarés de SFC et de FM diagnostiqués par un professionnel de la santé et pour déterminer les associations de ces affections avec six indicateurs de l'état de santé. Résultats : En 2010, 1,4 % (intervalle de confiance [IC] à 95 % : 1,3 % à 1,6 % des Canadiens de 12 ans ou plus vivant à domicile ont déclaré avoir reçu un diagnostic de SFC,1,5 % (IC à 95 %: 1,4 % à 1,7 % de FM, et 0,3 % (IC à 95 %: 0,3 % à 0,4 % a déclaré être atteinte à la fois de SFC et de FM. Les cas de SFC comme ceux de FM étaient plus fréquents chez les femmes, les adultes de 40 ans ou plus, les personnes à faible revenu et les personnes présentant certains facteurs de risque de maladie chronique (obésité, sédentarité et tabagisme. Après ajustement en fonction des différences existant entre les groupes, les personnes ayant déclaré être atteintes du SFC ou de FM ou des deux avaient un moins bon état de santé que les personnes atteintes d'aucune de ces affections pour cinq indicateurs de l'état de santé, mais aucune différence n'a été trouvée entre ces groupes par rapport à l'indicateur de santé mentale. Le fait d'être atteint à la fois du SFC et de FM et de présenter de multiples affections comorbides était associé à un moins bon état de santé. Conclusion : La présence concomitante du SFC, de la FM et d'autres affections chroniques était étroitement associée au fait d'avoir un moins bon état de santé, et les différences relatives à l'état de santé

  5. Electrochemical study of chemical properties in ethanolamine and its mixtures with water; Etude electrochimique de proprietes chimiques dans l'ethanolamine et ses melanges avec l'eau

    Energy Technology Data Exchange (ETDEWEB)

    Grall, M [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-12-01

    This work is concerned with the study of acid-base reactions and of complex formation in ethanolamine and its mixtures with water. The ionic product of the solvent has been determined by an electro-chemical study of the H{sup +}/H{sub 2} system. The reduction curves for ethanolamine-water mixtures, for different acidities, have made it possible to follow the variations in the size of the pH domain as a function of the composition of the solvent. The form of this variation has been explained on the basis of the dielectric constant and the solvation of the proton by the ethanolamine. In the second part, the electrochemical systems of mercury have been studied by anodic polarography. In order to establish a parallel between the acid-base reactions and complex formation reactions, we have studied the stability of Hg (CN){sub 2} in water-ethanolamine mixtures. It has been possible to deduce the law for the variation of pK{sub c} with solvent composition. The representative graph of this function passes through a minimum for a proportion of about 50 per cent of ethanolamine as in the case of acids. This variation has been explained by the predominating influence of {epsilon} for ethanolamine propositions of over 50 per cent and by that of the solvation of Hg{sup 2+} for proportions of under 50 per cent. (author) [French] Ce travail porte sur l'etude des reactions acides-bases et de formation de complexes dans l'ethanolamine et ses melanges avec l'eau. Le produit ionique du solvant a pu etre determine par l'etude electro-chimique du systeme H{sup +}/H{sub 2}. Les courbes de reduction des melanges ethanolamine-eau, pour des acidites variables, ont permis de suivre les variations de l'etendue du domaine de pH, en fonction de la composition du solvant. L'allure de cette variation a ete expliquee en faisant intervenir la constante dielectrique et la solvatation du proton par l'ethanolamine. Dans une deuxieme partie, les systemes electrochimiques du mercure ont ete etudies par

  6. Contribution to the elastic and inelastic scattering study polarized protons; Contribution a l'etude de la diffusion elastique et inelastique avec un faisceau de protons polarises

    Energy Technology Data Exchange (ETDEWEB)

    Swiniarski, R de [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-10-01

    +} presentent egalement des variations extremement interessantes. Lorsque le potentiel optique en entier est deforme, la DWBA ou les equations couplees predisent les petites asymetries de l = 2 correctement, mais en ce qui concerne le groupe des grandes asymetries, seuls l'accroissement considerable de la distorsion spin-orbite {beta}{sub S0} = 4 {beta}{sub Central} ou l'introduction d'un potentiel spin-orbite imaginaire negatif permettent de rendre compte de l'amplitude mesuree. Des calculs effectues avec un modele microscopique indiquent que les asymetries sont tres sensibles au facteur de forme et qu'il n'y a pas de differences sensibles entre les predictions S=0 et S=1. (auteur)

  7. Écriture et pensée, Pour en finir avec les inégalités d'écriture* !

    Directory of Open Access Journals (Sweden)

    Morinet Christiane

    2014-07-01

    Full Text Available Anthropologiquement, on peut réaliser à quel point l’invention de l’écriture par son potentiel historique et cognitif bouleverse progressivement et de façon ininterrompue les modes de pensée de l’espèce humaine organisée en communautés de langue. Ainsi, dans les sociétés industrialisées, les pratiques littératiennes sont devenues centrales au point d’être exigées de chacun des membres d’une communauté de langue. Leur enseignement est alors incontournable. En France, l’école, voulant dépasser l’effet de massification involontairement produit par la politique d’accès d’une classe d’âge entière aux lycées depuis les années 80 (Bautier, Rochex, 1998, remet en chantier ses façons d’enseigner dans l’espoir de contribuer à la démocratisation de l’enseignement des pratiques littératiennes. Toutefois, pour satisfaire cette ambition, la « révolution » intellectuelle que représente l’écriture est à mettre en continuité avec le développement de la parole. L’invention de l’écriture n’écrase pas, mais bien au contraire, stimule le phénomène langagier antérieur qu’est l’oralité, en intensifiant, dans l’espace et le temps, la densité des échanges langagiers. L’effort d’ouverture des lycées à l’ensemble d’une classe d’âge a révélé que le fait d’exposer une génération, toutes classes sociales confondues, aux connaissances telles que l’école les transmettait, n’entraîne pas, pour tous, leur appropriation dynamique. La sociologie du langage (Bautier, 1995 permet de dégager un usage cognitif du langage qui rappelle que les pratiques langagières sont des pratiques sociales. L’écrit dans l’évolution de la pensée possède un statut particulier. Paraphrasant le titre du livre de Bourdieu : Ce que parler veut dire (1982, je me suis demandé : « Ce qu’écrire veut dire ». Par conséquent, quelle est l’influence de l’écriture sur la pensée, d

  8. Investigating Quantum Modulation States

    Science.gov (United States)

    2016-03-01

    Coherent state quantum data encryption is highly interoperable with current classical optical infrastructure in both fiber and free space optical networks...hub’s field of regard has a transmit/receive module that are endpoints of the Lyot filter stage tree within the hub’s backend electro-optics control... mobile airborne and space-borne networking. Just like any laser communication technology, QC links are affected by several sources of distortions

  9. Sparx PCA Module

    Energy Technology Data Exchange (ETDEWEB)

    2017-04-25

    Sparx, a new environment for Cryo-EM image processing; Cryo-EM, Single particle reconstruction, principal component analysis; Hardware Req.: PC, MAC, Supercomputer, Mainframe, Multiplatform, Workstation. Software Req.: operating system is Unix; Compiler C++; type of files: source code, object library, executable modules, compilation instructions; sample problem input data. Location/transmission: http://sparx-em.org; User manual & paper: http://sparx-em.org;

  10. Modulated Pade approximant

    International Nuclear Information System (INIS)

    Ginsburg, C.A.

    1980-01-01

    In many problems, a desired property A of a function f(x) is determined by the behaviour of f(x) approximately equal to g(x,A) as x→xsup(*). In this letter, a method for resuming the power series in x of f(x) and approximating A (modulated Pade approximant) is presented. This new approximant is an extension of a resumation method for f(x) in terms of rational functions. (author)

  11. of Banach modules

    Directory of Open Access Journals (Sweden)

    Anousheh Fatemeh

    2015-10-01

    Full Text Available Let A be a Banach algebra, E be a Banach A-bimodule and Δ E → A be a bounded Banach A-bimodule homomorphism. It is shown that under some mild conditions, the weakΔ''-amenability of E'' (as an A''-bimodule necessitates weak Δ-amenability of E (as an A-bimodule. Some examples of weak-amenable Banach modules are provided as well.

  12. FERMI multi-chip module

    CERN Multimedia

    This FERMI multi-chip module contains five million transistors. 25 000 of these modules will handle the flood of information through parts of the ATLAS and CMS detectors at the LHC. To select interesting events for recording, crucial decisions are taken before the data leaves the detector. FERMI modules are being developed at CERN in partnership with European industry.

  13. Effets de l'alimentation des poissons avec Azolla sur la production d'un écosystème agro-piscicole en zones marécageuses au Rwanda

    Directory of Open Access Journals (Sweden)

    Kanangire, CK.

    2002-01-01

    Full Text Available Effects of Azolla-based Meal on the Production of an Agro-piscicultural Ecosystem in Rwanda Marshlands. Cette étude analyse les différences de caractères au niveau de la descendance des croisements interspécifiques entre Sesamum indicum L. et Ceratotheca sesamoides Endl. Les résultats obtenus montrent que l'héritabilité de la présence d'une forte pilosité sur les tiges et sur les pétioles est contrôlée par deux gènes assortis et indépendants. Les deux gènes dominants S et P confèrent aux plantes une importante pilosité sur les tiges et sur les pétioles tandis qu'un allèle dominant S-pp et ss-P confère aux plantes une pilosité respectivement abondante sur les tiges st sur les pétioles. Seuls les génotypes homozygotes sspp avec deux gènes récessifs produisent des plantes avec peu de poils sur les tiges et sur les pétioles. Les implications de ces résultats dans l'évolution de ces espèces sont discutées.

  14. Receiver Gain Modulation Circuit

    Science.gov (United States)

    Jones, Hollis; Racette, Paul; Walker, David; Gu, Dazhen

    2011-01-01

    A receiver gain modulation circuit (RGMC) was developed that modulates the power gain of the output of a radiometer receiver with a test signal. As the radiometer receiver switches between calibration noise references, the test signal is mixed with the calibrated noise and thus produces an ensemble set of measurements from which ensemble statistical analysis can be used to extract statistical information about the test signal. The RGMC is an enabling technology of the ensemble detector. As a key component for achieving ensemble detection and analysis, the RGMC has broad aeronautical and space applications. The RGMC can be used to test and develop new calibration algorithms, for example, to detect gain anomalies, and/or correct for slow drifts that affect climate-quality measurements over an accelerated time scale. A generalized approach to analyzing radiometer system designs yields a mathematical treatment of noise reference measurements in calibration algorithms. By treating the measurements from the different noise references as ensemble samples of the receiver state, i.e. receiver gain, a quantitative description of the non-stationary properties of the underlying receiver fluctuations can be derived. Excellent agreement has been obtained between model calculations and radiometric measurements. The mathematical formulation is equivalent to modulating the gain of a stable receiver with an externally generated signal and is the basis for ensemble detection and analysis (EDA). The concept of generating ensemble data sets using an ensemble detector is similar to the ensemble data sets generated as part of ensemble empirical mode decomposition (EEMD) with exception of a key distinguishing factor. EEMD adds noise to the signal under study whereas EDA mixes the signal with calibrated noise. It is mixing with calibrated noise that permits the measurement of temporal-functional variability of uncertainty in the underlying process. The RGMC permits the evaluation of EDA by

  15. Bent Electro-Absorption Modulator

    DEFF Research Database (Denmark)

    2002-01-01

    by applying a variable electric or electronmagnetic field. The modulation of the complex refractive index results in a modulation of the refractive index contrast and the absorption coefficient for the waveguide at the frequency of the light. By carefully adjusting the composition of the semiconducting...... components and the applied electric field in relation to the frequency of the modulated radiation, the bending losses (and possibly coupling losses) will provide extinction of light guided by the bent waveguide section. The refractive index contract may be modulated while keeping the absorption coefficient......The present invention relates to a method and a device for modulating optical signals based on modulating bending losses in bend, quantum well semiconductor waveguide sections. The complex refractive index of the optical active semiconducting components of the waveguide section is modulated...

  16. On staggered indecomposable Virasoro modules

    International Nuclear Information System (INIS)

    Kytoelae, Kalle; Ridout, David

    2009-01-01

    In this article, certain indecomposable Virasoro modules are studied. Specifically, the Virasoro mode L 0 is assumed to be nondiagonalizable, possessing Jordan blocks of rank 2. Moreover, the module is further assumed to have a highest weight submodule, the 'left module', and that the quotient by this submodule yields another highest weight module, the 'right module'. Such modules, which have been called staggered, have appeared repeatedly in the logarithmic conformal field theory literature, but their theory has not been explored in full generality. Here, such a theory is developed for the Virasoro algebra using rather elementary techniques. The focus centers on two different but related questions typically encountered in practical studies: How can one identify a given staggered module, and how can one demonstrate the existence of a proposed staggered module. Given just the values of the highest weights of the left and right modules, themselves subject to simple necessary conditions, invariants are defined which together with the knowledge of the left and right modules uniquely identify a staggered module. The possible values of these invariants form a vector space of dimension 0, 1, or 2, and the structures of the left and right modules limit the isomorphism classes of the corresponding staggered modules to an affine subspace (possibly empty). The number of invariants and affine restrictions is purely determined by the structures of the left and right modules. Moreover, in order to facilitate applications, the expressions for the invariants and restrictions are given by formulas as explicit as possible (they generally rely on expressions for Virasoro singular vectors). Finally, the text is liberally peppered throughout with examples illustrating the general concepts. These have been carefully chosen for their physical relevance or for the novel features they exhibit.

  17. On staggered indecomposable Virasoro modules

    Energy Technology Data Exchange (ETDEWEB)

    Kytoelae, Kalle [Geneve Univ. (Switzerland); Ridout, David [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2009-06-15

    In this article, certain indecomposable Virasoro modules are studied. Specifically, the Virasoro mode L0 is assumed to be non-diagonalisable, possessing Jordan blocks of rank two. Moreover, the module is further assumed to have a highest weight submodule, the ''left module'', and that the quotient by this submodule yields another highest weight module, the ''right module''. Such modules, which have been called staggered, have appeared repeatedly in the logarithmic conformal field theory literature, but their theory has not been explored in full generality. Here, such a theory is developed for the Virasoro algebra using rather elementary techniques. The focus centres on two different but related questions typically encountered in practical studies: How can one identify a given staggered module, and how can one demonstrate the existence of a proposed staggered module. Given just the values of the highest weights of the left and right modules, themselves subject to simple necessary conditions, invariants are defined which together with the knowledge of the left and right modules uniquely identify a staggered module. The possible values of these invariants form a vector space of dimension zero, one or two, and the structures of the left and right modules limit the isomorphism classes of the corresponding staggered modules to an affine subspace (possibly empty). The number of invariants and affine restrictions is purely determined by the structures of the left and right modules. Moreover, in order to facilitate applications, the expressions for the invariants and restrictions are given by formulae as explicit as possible (they generally rely on expressions for Virasoro singular vectors). Finally, the text is liberally peppered throughout with examples illustrating the general concepts. These have been carefully chosen for their physical relevance or for the novel features they exhibit. (orig.)

  18. On staggered indecomposable Virasoro modules

    International Nuclear Information System (INIS)

    Kytoelae, Kalle; Ridout, David

    2009-06-01

    In this article, certain indecomposable Virasoro modules are studied. Specifically, the Virasoro mode L0 is assumed to be non-diagonalisable, possessing Jordan blocks of rank two. Moreover, the module is further assumed to have a highest weight submodule, the ''left module'', and that the quotient by this submodule yields another highest weight module, the ''right module''. Such modules, which have been called staggered, have appeared repeatedly in the logarithmic conformal field theory literature, but their theory has not been explored in full generality. Here, such a theory is developed for the Virasoro algebra using rather elementary techniques. The focus centres on two different but related questions typically encountered in practical studies: How can one identify a given staggered module, and how can one demonstrate the existence of a proposed staggered module. Given just the values of the highest weights of the left and right modules, themselves subject to simple necessary conditions, invariants are defined which together with the knowledge of the left and right modules uniquely identify a staggered module. The possible values of these invariants form a vector space of dimension zero, one or two, and the structures of the left and right modules limit the isomorphism classes of the corresponding staggered modules to an affine subspace (possibly empty). The number of invariants and affine restrictions is purely determined by the structures of the left and right modules. Moreover, in order to facilitate applications, the expressions for the invariants and restrictions are given by formulae as explicit as possible (they generally rely on expressions for Virasoro singular vectors). Finally, the text is liberally peppered throughout with examples illustrating the general concepts. These have been carefully chosen for their physical relevance or for the novel features they exhibit. (orig.)

  19. On staggered indecomposable Virasoro modules

    Science.gov (United States)

    Kytölä, Kalle; Ridout, David

    2009-12-01

    In this article, certain indecomposable Virasoro modules are studied. Specifically, the Virasoro mode L0 is assumed to be nondiagonalizable, possessing Jordan blocks of rank 2. Moreover, the module is further assumed to have a highest weight submodule, the "left module," and that the quotient by this submodule yields another highest weight module, the "right module." Such modules, which have been called staggered, have appeared repeatedly in the logarithmic conformal field theory literature, but their theory has not been explored in full generality. Here, such a theory is developed for the Virasoro algebra using rather elementary techniques. The focus centers on two different but related questions typically encountered in practical studies: How can one identify a given staggered module, and how can one demonstrate the existence of a proposed staggered module. Given just the values of the highest weights of the left and right modules, themselves subject to simple necessary conditions, invariants are defined which together with the knowledge of the left and right modules uniquely identify a staggered module. The possible values of these invariants form a vector space of dimension 0, 1, or 2, and the structures of the left and right modules limit the isomorphism classes of the corresponding staggered modules to an affine subspace (possibly empty). The number of invariants and affine restrictions is purely determined by the structures of the left and right modules. Moreover, in order to facilitate applications, the expressions for the invariants and restrictions are given by formulas as explicit as possible (they generally rely on expressions for Virasoro singular vectors). Finally, the text is liberally peppered throughout with examples illustrating the general concepts. These have been carefully chosen for their physical relevance or for the novel features they exhibit.

  20. Weyl modules, demazure modules, KR-modules, crystals, fusion products and limit constructions

    OpenAIRE

    Fourier, G.; Littelmann, P.

    2007-01-01

    We study finite dimensional representations of current algebras, loop algebras and their quantized versions. For the current algebra of a simple Lie algebra of type {\\tt ADE}, we show that Kirillov-Reshetikhin modules and Weyl modules are in fact all Demazure modules. As a consequence one obtains an elementary proof of the dimension formula for Weyl modules for the current and the loop algebra. Further, we show that the crystals of the Weyl and the Demazure module are the same up to some addi...

  1. Brownian modulated optical nanoprobes

    International Nuclear Information System (INIS)

    Behrend, C.J.; Anker, J.N.; Kopelman, R.

    2004-01-01

    Brownian modulated optical nanoprobes (Brownian MOONs) are fluorescent micro- and nanoparticles that resemble moons: one hemisphere emits a bright fluorescent signal, while an opaque metal darkens the other hemisphere. Brownian motion causes the particles to tumble and blink erratically as they rotate literally through the phases of the moon. The fluctuating probe signals are separated from optical and electronic backgrounds using principal components analysis or images analysis. Brownian MOONs enable microrheological measurements on size scales and timescales that are difficult to study with other methods. Local chemical concentrations can be measured simultaneously, using spectral characteristics of indicator dyes embedded within the MOONs

  2. Oscillator, neutron modulator

    International Nuclear Information System (INIS)

    Agaisse, R.; Leguen, R.; Ombredane, D.

    1960-01-01

    The authors present a mechanical device and an electronic control circuit which have been designed to sinusoidally modulate the reactivity of the Proserpine atomic pile. The mechanical device comprises an oscillator and a mechanism assembly. The oscillator is made of cadmium blades which generate the reactivity oscillation. The mechanism assembly comprises a pulse generator for cycle splitting, a gearbox and an engine. The electronic device comprises or performs pulse detection, an on-off device, cycle pulse shaping, phase separation, a dephasing amplifier, electronic switches, counting scales, and control devices. All these elements are briefly presented

  3. CDC 7600 Module

    CERN Multimedia

    1970-01-01

    The CDC 7600 has been created by Seymour Cray. It was designed to be compatible with the 6600, which allows for a substantial increase in performance. Furthermore the rise of new technologies has enabled this performance by reducing the minor cycle clock period from 100 ns to 27.5 ns (4 time faster). A very large machine, the 7600 had over 120 miles of hand-wired interconnections. It was the most powerful computer of its time. However, this speed caused a ground-loop problem causing intermittent faults, and eventually requiring all modules to be fitted with sheathed rubber bands. The CDC 7600 was replaced in 1983 by CRAY-1A.

  4. Methode des Rayons avec Calcul d’Intensite Appliquee a la Propagation Anormale (Method of Ray Intensity Calculation as Applied to Anomalous Propagation),

    Science.gov (United States)

    1986-06-01

    plus rapproch~es. Cette question, qui constitue en elle-mgme un domaine de recherche, d~ borde du cadre du present rapport. * Il est possible d’gtendre...par la commande JCL "PROPEX:T.’ qui produit le module ex~cutable "PROPAG:EX". TABLEAU I Bloc principal PROPAK *NOM DES ROUTINES FONCTION PROPAG...alise la r &mission des rayons r~fl~chis e77 SANS CLASSIFICATION 22 TABLEAU II Bloc utilitaire UTILPAK NOM DES ROUTINES FONCTION H - Calcule r la

  5. Processing module operating methods, processing modules, and communications systems

    Science.gov (United States)

    McCown, Steven Harvey; Derr, Kurt W.; Moore, Troy

    2014-09-09

    A processing module operating method includes using a processing module physically connected to a wireless communications device, requesting that the wireless communications device retrieve encrypted code from a web site and receiving the encrypted code from the wireless communications device. The wireless communications device is unable to decrypt the encrypted code. The method further includes using the processing module, decrypting the encrypted code, executing the decrypted code, and preventing the wireless communications device from accessing the decrypted code. Another processing module operating method includes using a processing module physically connected to a host device, executing an application within the processing module, allowing the application to exchange user interaction data communicated using a user interface of the host device with the host device, and allowing the application to use the host device as a communications device for exchanging information with a remote device distinct from the host device.

  6. Aperture modulated arc therapy

    International Nuclear Information System (INIS)

    Crooks, S M; Wu, Xiaodong; Takita, C; Watzich, M; Xing Lei

    2003-01-01

    We show that it is possible to translate an intensity modulated radiation therapy (IMRT) treatment plan and deliver it as a single arc. This technique is referred to in this paper as aperture modulation arc therapy (AMAT). During this arc, the MLC leaves do not conform to the projection of the target PTV and the machine output of the accelerator has a constant value. Dose was calculated using the CORVUS 4.0 IMRT system, which uses a pencil beam dose algorithm, and treatments were delivered using a Varian 2100C/D Clinac. Results are presented for a head and neck and a prostate case, showing the equivalence of the IMRT and the translated AMAT delivery. For a prostate AMAT delivery, coronal plane film dose for the IMRT and AMAT deliveries agreed within 7.19 ± 6.62%. For a meningioma the coronal plane dose distributions were similar to a value of 4.6 ± 6.62%. Dose to the isocentre was measured as being within 2% of the planned value in both cases

  7. A fortran program for elastic scattering of deuterons with an optical model containing tensorial potentials; Programme fortran pour la diffusion elastique de deutons avec un modele optique contenant des termes tensoriels

    Energy Technology Data Exchange (ETDEWEB)

    Raynal, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    The optical model has been applied with success to the elastic scattering of particles of spin 0 and 1/2 and to a lesser degree to that of deuterons. For particles of spin l/2, an LS coupling term is ordinarily used; this term is necessary to obtain a polarization; for deuterons, this coupling has been already introduced, but the possible forms of potentials are more numerous (in this case, scalar products of a second rank spin tensor with a tensor of the same rank in space or momentum can occur). These terms which may be necessary are primarily important for the tensor polarization. This problem is of particular interest at Saclay since a beam of polarized deuterons has become available. The FORTRAN program SPM 037 permits the study of the effect of tensorial potentials constructed from the distance of the deuteron from the target and its angular momentum with respect to it. This report should make possible the use and even the modification of the program. It consists of: a description of the problem and of the notation employed, a presentation of the methods adopted, an indication of the necessary data and how they should be introduced, and finally tables of symbols which are in equivalence or common statements: these tables must be considered when making any modification. (author) [French] Le modele optique a ete applique avec succes a la diffusion elastique des particules de spin nul et 1/2 et dans une moindre mesure a celle des deutons. Pour les particules de spin 1/2, on utilise habituellement un couplage LS, necessaire pour calculer la polarisation; pour les deutons, ce couplage a deja ete introduit, mais les formes de potentiel possibles sont plus nombreuses (intervention de produits scalaires d'un tenseur d'ordre 2 de spin avec un tenseur du meme ordre d'espace ou d'impulsion) et celles qui peuvent etre eventuellement necessaires ont une importance capitale pour la polarisation tensorielle. Ce probleme revet a Saclay un interet

  8. A fortran program for elastic scattering of deuterons with an optical model containing tensorial potentials; Programme fortran pour la diffusion elastique de deutons avec un modele optique contenant des termes tensoriels

    Energy Technology Data Exchange (ETDEWEB)

    Raynal, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    The optical model has been applied with success to the elastic scattering of particles of spin 0 and 1/2 and to a lesser degree to that of deuterons. For particles of spin l/2, an LS coupling term is ordinarily used; this term is necessary to obtain a polarization; for deuterons, this coupling has been already introduced, but the possible forms of potentials are more numerous (in this case, scalar products of a second rank spin tensor with a tensor of the same rank in space or momentum can occur). These terms which may be necessary are primarily important for the tensor polarization. This problem is of particular interest at Saclay since a beam of polarized deuterons has become available. The FORTRAN program SPM 037 permits the study of the effect of tensorial potentials constructed from the distance of the deuteron from the target and its angular momentum with respect to it. This report should make possible the use and even the modification of the program. It consists of: a description of the problem and of the notation employed, a presentation of the methods adopted, an indication of the necessary data and how they should be introduced, and finally tables of symbols which are in equivalence or common statements: these tables must be considered when making any modification. (author) [French] Le modele optique a ete applique avec succes a la diffusion elastique des particules de spin nul et 1/2 et dans une moindre mesure a celle des deutons. Pour les particules de spin 1/2, on utilise habituellement un couplage LS, necessaire pour calculer la polarisation; pour les deutons, ce couplage a deja ete introduit, mais les formes de potentiel possibles sont plus nombreuses (intervention de produits scalaires d'un tenseur d'ordre 2 de spin avec un tenseur du meme ordre d'espace ou d'impulsion) et celles qui peuvent etre eventuellement necessaires ont une importance capitale pour la polarisation tensorielle. Ce probleme revet a Saclay un interet particulier depuis la mise

  9. Compatibility problems of canning materials with carbon dioxide at high temperatures; Problemes de comptabilite des materiaux de gainage avec le gaz carbonique aux temperatures elevees

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R; Loriers, H [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    and iron-aluminium alloys should increase as a result of the research carried out with a view to improving their technological and mechanical properties. (authors) [French] L'adoption, en France, du gaz carbonique sous pression comme fluide caloporteur dans les reacteurs avances des filieres graphite-gaz et eau lourde-gaz, a impose la recherche de materiaux de gainage susceptibilite prendre la releve des alliages de magnesium. En effet, ces derniers deviennent inutilisables au dessus de 500 C environ, en raison de la proximite de leur point de fusion et de leurs proprietes mecaniques alors defaillantes, quoique leur compatibilite avec le gaz carbonique reste relativement bonne. Le beryllium, particulierement seduisant en raison de sa faible section de capture pour les neutrons thermiques, presente, entre autres, un inconvenient grave: son utilisation dans le gaz carbonique n'est possible, des 600 C, que si ce gaz est rigoureusement desseche, la pression partielle de vapeur d'eau etant le facteur determinant imposant une dessication d'autant plus poussee que la pression nominale est plus elevee. Dans le cas contraire, apres une courte periode d'incubation, l'oxydation s'accelere, conduisant a une corrosion intergranulaire rapidement destructrice. Neanmoins, les alliages beryllium-calcium ou beryllium-magnesium, a 0,5 pour cent environ d'element d'addition, permettent de surmonter cette difficulte; ils restent utilisables en presence de quelques centaines de vpm de vapeur d'eau jusqu'a 700 C au moins. Les problemes metallurgiques lies a la mise en oeuvre du beryllium ou de ses alliages ont cependant conduit a envisager provisoirement l'utilisation d'aciers inoxydables austenitiques. Ces materiaux sont intrinsequement tres resistants a l'oxydation; mais, comme ils ne peuvent etre employes qu'en faible epaisseur, etant donne leur section de capture importante, il y a lieu de choisir les nuances comparativement les moins oxydables. Au dessus de 600 C, les nuances

  10. Whole Module Offgas Test Report: Space-Xl Dragon Module

    Science.gov (United States)

    James, John T.

    2012-01-01

    On September 26 and September 28,2012 a chemist from the JSC Toxicology Group acquired samples of air in 500 m1 evacuated canisters from the sealed Space-Xl Dragon Module. One sample was also acquired from Space-X Facility near the module at the start of the test. Samples of the module air were taken in triplicate once the module had been sealed, and then taken again in triplicate 1.98 days later. Ofthe triplicate samples, the first served as a line purge, and the last two were analyzed. The results of 5 samples are reported.

  11. Modular crystals as modulated structures

    DEFF Research Database (Denmark)

    Elcoro, L.; Perez-Mato, J.M.; Friese, K.

    2008-01-01

    The use of the superspace formalism is extended to the description and refinement of the homologous series of modular structures with two symmetry-related modules with different orientations. The lillianite homologous series has been taken as a study case. Starting from a commensurate modulated...... composite description with two basic subsystems corresponding to the two different modules, it is shown how a more efficient description can be achieved using so-called zigzag modulation functions. These linear zigzag modulations, newly implemented in the program JANA2006, have very large fixed amplitudes...... and introduce in the starting model the two orientations of the underlying module sublattices. We show that a composite approach with this type of function, which treats the cations and anions as two separate subsystems forming a misfit compound, is the most appropriate and robust method for the refinements....

  12. Apparatuses to support photovoltaic modules

    Science.gov (United States)

    Ciasulli, John; Jones, Jason

    2017-08-22

    Methods and apparatuses to support photovoltaic ("PV") modules are described. A saddle bracket has a mounting surface to support one or more PV modules over a tube, a gusset coupled to the mounting surface, and a mounting feature coupled to the gusset to couple to the tube. A grounding washer has a first portion to couple to a support; and a second portion coupled to the first portion to provide a ground path to a PV module. A PV system has a saddle bracket; a PV module over the saddle bracket; and a grounding washer coupled to the saddle bracket and the PV module. Saddle brackets can be coupled to a torque tube at predetermined locations. PV modules can be coupled to the saddle brackets.

  13. Mixed twistor D-modules

    CERN Document Server

    Mochizuki, Takuro

    2015-01-01

    We introduce mixed twistor D-modules and establish their fundamental functorial properties. We also prove that they can be described as the gluing of admissible variations of mixed twistor structures. In a sense, mixed twistor D-modules can be regarded as a twistor version of M. Saito's mixed Hodge modules. Alternatively, they can be viewed as a mixed version of the pure twistor D-modules studied by C. Sabbah and the author. The theory of mixed twistor D-modules is one of the ultimate goals in the study suggested by Simpson's Meta Theorem, and it would form a foundation for the Hodge theory of holonomic D-modules which are not necessarily regular singular.  .

  14. Photovoltaic concentrator module improvements study

    Energy Technology Data Exchange (ETDEWEB)

    Levy, S.L.; Kerschen, K.A. (Black and Veatch, Kansas City, MO (United States)); Hutchison, G. (Solar Kinetics, Inc., Dallas, TX (United States)); Nowlan, M.J. (Spire Corp., Bedford, MA (United States))

    1991-08-01

    This report presents results of a project to design and fabricate an improved photovoltaic concentrator module. Using previous work as a baseline, this study conducted analyses and testing to select major module components and design features. The lens parquet and concentrator solar cell were selected from the highest performing, available components. A single 185X point-focus module was fabricated by the project team and tested at Sandia. Major module characteristics include a 6 by 4 compression-molded acrylic lens parquet (0.737 m{sup 2} area), twenty-four 0.2 ohms-cm, FZ, p-Si solar cells (1.56 cm{sup 2} area) soldered to ceramic substrates and copper heat spreaders, and an aluminized steel housing with corrugated bottom. This project marked the first attempt to use prismatic covers on solar cells in a high-concentration, point-focus application. Cells with 15 percent metallization were obtained, but problems with the fabrication and placement of prismatic covers on these cells lead to the decision not to use covers in the prototype module. Cell assembly fabrication, module fabrication, and module optical design activities are presented here. Test results are also presented for bare cells, cell assemblies, and module. At operating conditions of 981 watts/m{sup 2} DNI and an estimated cell temperature of 65{degrees}C, the module demonstrated an efficiency of 13.9 percent prior to stressed environmental exposure. 12 refs., 56 figs., 7 tabs.

  15. Adjustable extender for instrument module

    International Nuclear Information System (INIS)

    Sevec, J.B.; Stein, A.D.

    1975-01-01

    A blank extender module used to mount an instrument module in front of its console for repair or test purposes has been equipped with a rotatable mount and means for locking the mount at various angles of rotation for easy accessibility. The rotatable mount includes a horizontal conduit supported by bearings within the blank module. The conduit is spring-biased in a retracted position within the blank module and in this position a small gear mounted on the conduit periphery is locked by a fixed pawl. The conduit and instrument mount can be pulled into an extended position with the gear clearing the pawl to permit rotation and adjustment of the instrument

  16. Perancangan Modul Penggajian Berbasis Odoo

    OpenAIRE

    Koeswanto, Vincent K. Edison; Yulia, Yulia; Adipranata, Rudy

    2016-01-01

    Human Resource Module is one of the modules owned by Odoo. One of the feature of this module is payroll. However, the features is not in accordance with the needs of companies in Indonesia in general. This causes the payroll system in Odoo not suitable to be implemented directly in the company.To solve these problems, author develop the payroll system in Human Resource module in Odoo. The development of this system is preceded by designing and analyze the payroll system at PT X. It also condu...

  17. Etude de la stabilité globale de l’équilibre endémique des modèles multi groupes SIR avec une incidence non linéaire.

    OpenAIRE

    BENCHAIB, NESRINE

    2014-01-01

    Dans ce mémoire, on présente le nombre de reproduction de base pour un modèle épidémique multigroupe avec une incidence non linéaire. Ensuite, on établie la dynamique globale est entièrement déterminée par le nombre de reproduction de base R0. On montre que le nombre de reproduction de base R0 est un paramètre global de seuil dans le sens que si il est inférieur ou égale à 1, l’équilibre sans maladie est globalement stable et la maladie s’éteint, alors que si il est supérieur à 1, il est u...

  18. L'aptitude au croisement avec le seigle (Secale cereale L.) d'une lignée hexaploïde de Triticum (cv. " Roazon " résultant d'hybridation interspécifique (Gramineae Juss.)

    OpenAIRE

    STEFANOWSKA , Grazyna; CAUDERON , Yvonne

    1983-01-01

    La lignée de blé hexaploïde « Roazon », qui possède les caractères d’adaptation du groupe des blés tendres intensifs de l’Europe de l’Ouest, résulte d’hybridations interspécifiques mettant en jeu des génotypes extérieurs à ce groupe, en présence du cytoplasme d’Aegilops ventricosa. Les auteurs montrent que « Roazon» donne facilement des hybrides avec le seigle « Petkus » et discutent de l’origine de cette caractéristique également inhabituelle chez les blés tendres européens....

  19. La réflexion des ondes électromagnétiques du milieu de gyrotropie anisotrope, avec un axe d'anisotropie et un angle d'incidence arbitraires

    Science.gov (United States)

    Tchalyk, A.

    1994-01-01

    The interaction of plane electromagnetic wave with half-infinit gyrotropic media for different directions of propagation of incident microwave radiation and various directions of gyrotropic axis are investigated. The equations for calculation of wave's parameters exited in media and reflected from media-surface are obtained. On étudie l'interaction d'une onde électromagnétique plane avec un milieu gyrotrope à demi-infini dans le cas d'une direction arbitraire de propagation de la radiation électromagnétique incidente et de l'axe de gyrotropie. On a obtenu des expressions permettant de calculer les caractéristiques des ondes excitées dans et par le milieu.

  20. Título do sítio electrónico: Fédération Européenne des Associations Nacionales Travaillant avec les Sans-Abri e European Observatory on Homelessness

    Directory of Open Access Journals (Sweden)

    João Aldeia

    2012-10-01

    Full Text Available Optou-se por apresentar conjuntamente as duas páginas pela sua estreita articulação temática e institucional. Criada em 1989, a FEANTSA – Fédération Européenne des Associations Nacionales Travaillant avec les Sans-Abri – é uma organização não-governamental (ONG dedicada a eliminar a pobreza e exclusão social de indivíduos sem-abrigo ou em risco de conhecer esta situação, que congrega mais de 100 ONGs locais e nacionais de vários Estados-membros da União Europeia, sendo financiada pela Comiss...

  1. Aurélien Bernier, 2008, Le climat otage de la finance ou comment le marché boursicote avec les droits à polluer, Essai, Mille et une nuits, Paris, 164 p.

    Directory of Open Access Journals (Sweden)

    Béatrice Quenault

    2009-01-01

    Full Text Available Dans cet essai, au titre provocateur « Le climat otage de la finance ou comment le marché boursicote avec les droits à polluer », l’auteur, Aurélien Bernier, ancien membre d’Attac France et chargé de mission dans le domaine de l’environnement, décrypte le fonctionnement d’un nouveau compartiment de la finance internationale, la « finance carbone » constituée d’un ensemble de marchés où s’échangent les permis d’émission négociables ou les unités de réduction d’émissions, communément appelés « ...

  2. Photovoltaic module mounting system

    Science.gov (United States)

    Miros, Robert H. J. [Fairfax, CA; Mittan, Margaret Birmingham [Oakland, CA; Seery, Martin N [San Rafael, CA; Holland, Rodney H [Novato, CA

    2012-04-17

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  3. Multichip module technology development

    International Nuclear Information System (INIS)

    Kapustinsky, J.S.; Boissevain, J.G.; Muck, R.C.; Smith, G.D.; Wong-Swanson, B.G.; Ziock, H.J.

    1997-01-01

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). A Multichip Module (MCM) was designed and submitted for fabrication to the Lockheed Martin foundry using a licensed process called High Density Interconnect (HDI). The HDI process uses thin film techniques to create circuit interconnect patterns on multiple layers of dielectric film which are deposited directly on top of unpackaged electronic die. This results in an optimally small package that approaches the area of the bare die themselves. This project tested the capability of the Lockheed Martin foundry to produce, in an HDI process, a complex mixed-mode (analog and digital) circuit on a single MCM substrate

  4. Digital Communication and Modulation

    DEFF Research Database (Denmark)

    Sørensen, John Aasted

    2011-01-01

    system. Having passed the course, the student will be able to accomplish the following, within the areas shown below: Model for Communication System. Prepare and explain the functional block in a digital communication system, corresponding to the specific course contents. Model for Communication Channel...... system.   Sessions in class with active participation by the students. The time will be divided between lectures and the students solving problems, including simulating digital communication building blocks in Matlab. Combines lectures and hands-on work. Semester: E2011 Extent: 7.5 ects......, the fundamental principles for modulation and detection in Gaussian noise is treated. This includes the principles for the determination of the bit-error rate for a digital communication system. During the course, a selection of small Matlab exercises are prepared, for simulation of parts of a communication...

  5. Digital Communication and Modulation

    DEFF Research Database (Denmark)

    Sørensen, John Aasted

    2011-01-01

    system. Having passed the course, the student will be able to accomplish the following, within the areas shown below: Model for Communication System. Prepare and explain the functional block in a digital communication system, corresponding to the specific course contents. Model for Communication Channel...... system. Sessions in class with active participation by the students. The time will be divided between lectures and the students solving problems, including simulating digital communication building blocks in Matlab. Combines lectures and hands-on work. Semester: F2011 Extent: 7.5 ects......, the fundamental principles for modulation and detection in Gaussian noise is treated. This includes the principles for the determination of the bit-error rate for a digital communication system. During the course, a selection of small Matlab exercises are prepared, for simulation of parts of a communication...

  6. Modulated convection at high frequencies and large modulation amplitudes

    International Nuclear Information System (INIS)

    Swift, J.B.; Hohenberg, P.C.

    1987-01-01

    Modulated Rayleigh-Benard convection is analyzed for high frequencies and large modulation amplitudes. The linear theory of Gershuni and Zhukhovitskii is generalized to the nonlinear domain, and a subcritical bifurcation to convection is found in agreement with the experiments of Niemela and Donnelly. The crossover between the high-frequency (''Stokes layer'') regime and the low-frequency regime studied previously is analyzed

  7. Modulation masking produced by second-order modulators

    DEFF Research Database (Denmark)

    Füllgrabe, Christian; Moore, Brian C.J.; Demany, Laurent

    2005-01-01

    Recent studies suggest that an auditory nonlinearity converts second-order sinusoidal amplitude modulation (SAM) (i.e., modulation of SAM depth) into a first-order SAM component, which contributes to the perception of second-order SAM. However, conversion may also occur in other ways such as coch...

  8. Reaction Mechanism of Calcium Hydroxide with Gaseous Hydrogen Chloride Mécanisme de réaction de l'hydroxyde de calcium avec de l'acide chlorhydrique gazeux

    Directory of Open Access Journals (Sweden)

    Allal K. M.

    2006-12-01

    Full Text Available The reduction of acid gas content in combustion or incineration flue gases can be carried out by reaction with dry, fine alkaline sorbents such as calcium oxide or calcium hydroxide. In the present work, in addition to the thermodynamic study of the different reactions involved in the dechlorination process, an experimental study to identify the reaction products by means of X-ray diffraction, electron microscopy and thermogravimetry has been carried out. It has been shown that the reaction of hydrochloric acid with hydrated lime leads to the formation of not only calcium chloride but calcium hydroxichloride. La diminution de la teneur en gaz acides dans les effluents provenant des unités de combustion ou d'incinération peut être accomplie en faisant réagir ces gaz polluants avec des absorbants alcalins tels que l'oxyde ou l'hydroxyde de calcium. Dans cet article, à l'étude thermodynamique des différentes réactions mises en jeu durant le processus de déchloruration, s'ajoute une étude expérimentale menant à l'identification des produits finaux en utilisant la diffraction X, la microscopie électronique ainsi que la thermogravimétrie. A l'issue de cette étude, il a été montré que la réaction de Ca(OH2 avec HCl entraîne la formation non seulement de CaCI2 mais aussi CaCIOH.

  9. Solar combi system with phase-change materials; CoSyPCM. Combi-systeme avec materiaux a changement de phase

    Energy Technology Data Exchange (ETDEWEB)

    Citherlet, S.; Bony, J.

    2007-02-15

    Within the framework of Task 32 of the Solar Heating and Cooling Programme of the International Energy Agency (IEA) we studied the potential of using Phase Change Material (PCM) in a solar combi system in the form of modules placed in a storage tank. The goal was to analyze the potential of latent heat storage in a water tank of a solar installation, in order to increase the performance or to reduce the storage volume. This report describes the methodology used and the results obtained during the analysis of the heat storage potential by latent heat. The following stages were carried out: (i) Development of a simulation model: As no reliable numerical model exists, we developed a dynamic model to simulate PCM modules of various PCM types and shapes. This simulation model takes into account the hysteresis, the subcooling as well as the internal convection of the PCM in a liquid phase. This model was implemented in an existing TRNSYS Type(60). (ii) Laboratory measurements: In order to validate the digital model we tested various configurations and different types of PCM to check the agreement between simulations and experimental results. This step was focused on the time-dependent temperature distribution in the PCM and in the storage tank in order to validate the numerical model. (iii) Solar combi system: The potential relevance of the PCM was tested by using a solar combi system (Arpege) both with and without PCM. An energy balance was established on the basis of a seven days uninterrupted use of Arpege in various conditions (meteorological conditions and domestic hot water draw-off). Following the validation of the numerical model, annual simulations were carried out. (iv) Environmental impacts: A life cycle analysis of this solar combi system both with and without PCM was carried out. This analysis takes into account materials of the Arpege installation, the PCM and its container, as well as auxiliary energy used. (author)

  10. Mutually-modulated cross-gain modulation and slow light

    International Nuclear Information System (INIS)

    Sternklar, Shmuel; Sarid, Eyal; Wart, Maxim; Granot, Er'el

    2010-01-01

    The interaction of pump and Stokes light in a Brillouin medium, where both beams are modulated, can be utilized for controlling the group velocity of the amplified Stokes (or depleted pump). The dependence of the group velocity for this mutually-modulated cross-gain modulation (MMXGM) technique on the Brillouin gain parameter is studied. A sharp transition to slow light occurs in the G 1 α/β≈1 regime, where G 1 is the Brillouin gain parameter, and α and β are the pump and Stokes modulation indices, respectively. A comparison of MMXGM slow light to the Brillouin dispersion-based slow-light technique reveals the fundamental differences between them. The formation of higher harmonics of the modulation frequency is also discussed. The theoretical predictions are experimentally corroborated and potential applications in fiber-based sensing and interferometry are discussed

  11. Algorithmes de reconstruction pour le filtrage en ligne et application à la mesure de la section efficace de la collision $e^{+}e^{-} \\to (e^{+}e^{-})\\eta$ c avec le système de digitalisation rapide pour la chambre à vertex de l'expérience L3

    CERN Document Server

    Forconi, G

    1993-01-01

    Algorithmes de reconstruction pour le filtrage en ligne et application à la mesure de la section efficace de la collision $e^{+}e^{-} \\to (e^{+}e^{-})\\eta$ c avec le système de digitalisation rapide pour la chambre à vertex de l'expérience L3

  12. Étude des interactions hadroniques à deux corps chargés, induites sur des protons par un faisceau de $\\pi^{-}, K^{-}$, et $\\overline{p}$ entre 3 et 12 GeV/c, avec un angle de diffusion dans le centre de masse voisin de 90$^{o}$

    CERN Document Server

    Billoir, Pierre

    1983-01-01

    Étude des interactions hadroniques à deux corps chargés, induites sur des protons par un faisceau de $\\pi^{-}, K^{-}$, et $\\overline{p}$ entre 3 et 12 GeV/c, avec un angle de diffusion dans le centre de masse voisin de 90$^{o}$

  13. Force Modulator System

    Energy Technology Data Exchange (ETDEWEB)

    Redmond Clark

    2009-04-30

    Many metal parts manufacturers use large metal presses to shape sheet metal into finished products like car body parts, jet wing and fuselage surfaces, etc. These metal presses take sheet metal and - with enormous force - reshape the metal into a fully formed part in a manner of seconds. Although highly efficient, the forces involved in forming metal parts also damage the press itself, limit the metals used in part production, slow press operations and, when not properly controlled, cause the manufacture of large volumes of defective metal parts. To date, the metal-forming industry has not been able to develop a metal-holding technology that allows full control of press forces during the part forming process. This is of particular importance in the automotive lightweighting efforts under way in the US automotive manufacturing marketplace. Metalforming Controls Technology Inc. (MC2) has developed a patented press control system called the Force Modulator that has the ability to control these press forces, allowing a breakthrough in stamping process control. The technology includes a series of hydraulic cylinders that provide controlled tonnage at all points in the forming process. At the same time, the unique cylinder design allows for the generation of very high levels of clamping forces (very high tonnages) in very small spaces; a requirement for forming medium and large panels out of HSS and AHSS. Successful production application of these systems testing at multiple stamping operations - including Ford and Chrysler - has validated the capabilities and economic benefits of the system. Although this technology has been adopted in a number of stamping operations, one of the primary barriers to faster adoption and application of this technology in HSS projects is system cost. The cost issue has surfaced because the systems currently in use are built for each individual die as a custom application, thus driving higher tooling costs. This project proposed to better

  14. Acceleration recorder and playback module

    Science.gov (United States)

    Bozeman, Richard J., Jr.

    1994-11-01

    The present invention is directed to methods and apparatus relating to an accelerometer electrical signal recorder and playback module. The recorder module may be manufactured in lightweight configuration and includes analog memory components to store data. Signal conditioning circuitry is incorporated into the module so that signals may be connected directly from the accelerometer to the recorder module. A battery pack may be included for powering both the module and the accelerometer. Timing circuitry is included to control the time duration within which data is recorded or played back so as to avoid overloading the analog memory components. Multiple accelerometer signal recordings may be taken simultaneously without analog to digital circuits, multiplexing circuitry or software to compensate for the effects of multiplexing the signals.

  15. Biological modulation of tectonics

    Science.gov (United States)

    Sleep, N. H.; Bird, D. K.

    2008-12-01

    Photosynthesis has had geologic consequences over the Earth's history. In addition to modifying Earth's atmosphere and ocean chemistry, it has also modulated tectonic processes through enhanced weathering and modification of the nature and composition of sedimentary rocks within fold mountain belts and convergent margins. Molecular biological studies indicate that bacterial photosynthesis evolved just once and that most bacterial clades descend from this photosynthetic common ancestor. Iron-based photosynthesis (ideally 4FeO + CO2 + H2O = 2Fe2O3 + CH2O) was the most bountiful anoxygenic niche on land. The back reaction provided energy to heterotrophic microbes and returned FeO to the photosynthetic microbes. Bacterial land colonists evolved into ecosystems that effectively weathered FeO-bearing minerals and volcanic glass. Clays, sands, and dissolved cations from the weathering process entered the ocean and formed our familiar classes sedimentary rocks: shales, sandstones, and carbonates. Marine photosynthesis caused organic carbon to accumulate in black shales. In contrast, non-photosynthetic ecosystems do not cause organic carbon to accumulate in shale. These evolutionary events occurred before 3.8 Ga as black shales are among the oldest rock types (Rosing and Frei, Earth Planet. Sci. Lett. 217, 237-244, 2004). Thick sedimentary sequences deformed into fold mountain belts. They remelted at depth to form granitic rocks (Rosing et al., Palaeoclimatol. Palaeoecol. 232, 99-11, 2006). Regions of outcropping low-FeO rocks including granites, quartzites, and some shales were a direct result. This dearth of FeO favored the evolution of oxic photosynthesis of cyanobacteria from photosynthetic soil bacteria. Black shales have an additional modulation effect on tectonics as they concentrate radioactive elements, particularly uranium (e.g. so that the surface heat flow varies by a factor of ca. 2). Thick sequences of black shales at continental rises of passive margins are

  16. Modulator-free quadrature amplitude modulation signal synthesis

    Science.gov (United States)

    Liu, Zhixin; Kakande, Joseph; Kelly, Brian; O'Carroll, John; Phelan, Richard; Richardson, David J.; Slavík, Radan

    2014-12-01

    The ability to generate high-speed on-off-keyed telecommunication signals by directly modulating a semiconductor laser’s drive current was one of the most exciting prospective applications of the nascent field of laser technology throughout the 1960s. Three decades of progress led to the commercialization of 2.5 Gbit s-1-per-channel submarine fibre optic systems that drove the growth of the internet as a global phenomenon. However, the detrimental frequency chirp associated with direct modulation forced industry to use external electro-optic modulators to deliver the next generation of on-off-keyed 10 Gbit s-1 systems and is absolutely prohibitive for today’s (>)100 Gbit s-1 coherent systems, which use complex modulation formats (for example, quadrature amplitude modulation). Here we use optical injection locking of directly modulated semiconductor lasers to generate complex modulation format signals showing distinct advantages over current and other currently researched solutions.

  17. 47 CFR 78.115 - Modulation limits.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Modulation limits. 78.115 Section 78.115... SERVICE Technical Regulations § 78.115 Modulation limits. (a) If amplitude modulation is employed, negative modulation peaks shall not exceed 100 percent modulation. [37 FR 3292, Feb. 12, 1972, as amended...

  18. Modulated Source Interferometry with Combined Amplitude and Frequency Modulation

    Science.gov (United States)

    Gutierrez, Roman C. (Inventor)

    1998-01-01

    An improved interferometer is produced by modifying a conventional interferometer to include amplitude and/or frequency modulation of a coherent light source at radio or higher frequencies. The phase of the modulation signal can be detected in an interfering beam from an interferometer and can be used to determine the actual optical phase of the beam. As such, this improvement can be adapted to virtually any two-beam interferometer, including: Michelson, Mach-Zehnder, and Sagnac interferometers. The use of an amplitude modulated coherent tight source results in an interferometer that combines the wide range advantages of coherent interferometry with the precise distance measurement advantages of white light interferometry.

  19. OCGen Module Mooring Project

    Energy Technology Data Exchange (ETDEWEB)

    McEntee, Jarlath [Ocean Renewable Power Company, LLC, Portland, ME (United States)

    2015-02-06

    Ocean Renewable Power Company's OCGen Module Mooring Project provided an extensive research, design, development, testing and data collection effort and analysis conducted with respect to a positively buoyant, submerged MHK device secured to the seabed using a tensioned mooring system. Different analytic tools were evaluated for their utility in the design of submerged systems and their moorings. Deployment and testing of a prototype OCGen® system provided significant data related to mooring line loads and system attitude and station keeping. Mooring line loads were measured in situ and reported against flow speeds. The Project made a significant step in the development of designs, methodologies and practices related to floating and mooring of marine hydrokinetic (MHK) devices. Importantly for Ocean Renewable Power Company, the Project provided a sound basis for advancing a technically and commercially viable OCGen® Power System. The OCGen® Power System is unique in the MHK industry and, in itself, offers distinct advantages of MHK devices that are secured to the seabed using fixed structural frames. Foremost among these advantages are capital and operating cost reductions and increased power extraction by allowing the device to be placed at the most energetic level of the water column.

  20. Diamond pixel modules

    International Nuclear Information System (INIS)

    Asner, D.; Barbero, M.; Bellini, V.; Belyaev, V.; Brom, J-M.; Bruzzi, M.; Chren, D.; Cindro, V.; Claus, G.; Cristinziani, M.; Costa, S.; D'Alessandro, R.; Boer, W. de; Dobos, D.; Dolenc, I.; Dulinski, W.; Duris, J.; Eremin, V.; Eusebi, R.; Frais-Koelbl, H.

    2011-01-01

    With the commissioning of the LHC in 2010 and upgrades expected in 2015, ATLAS and CMS are planning to upgrade their innermost tracking layers with radiation hard technologies. Chemical Vapor Deposition diamond has been used extensively in beam conditions monitors as the innermost detectors in the highest radiation areas of BaBar, Belle, CDF and all LHC experiments. This material is now being considered as a sensor material for use very close to the interaction region where the most extreme radiation conditions exist. Recently the RD42 collaboration constructed, irradiated and tested polycrystalline and single-crystal chemical vapor deposition diamond sensors to the highest fluences expected at the super-LHC. We present beam test results of chemical vapor deposition diamond up to fluences of 1.8x10 16 protons/cm 2 illustrating that both polycrystalline and single-crystal chemical vapor deposition diamonds follow a single damage curve. We also present beam test results of irradiated complete diamond pixel modules.

  1. Diamond pixel modules

    Energy Technology Data Exchange (ETDEWEB)

    Asner, D. [Carleton University, Ottawa (Canada); Barbero, M. [Universitaet Bonn (Germany); Bellini, V. [INFN/University of Catania (Italy); Belyaev, V. [MEPHI Institute, Moscow (Russian Federation); Brom, J-M. [IPHC, Strasbourg (France); Bruzzi, M. [INFN/University of Florence (Italy); Chren, D. [Czech Technical University, Prague (Czech Republic); Cindro, V. [Jozef Stefan Institute, Ljubljana (Slovenia); Claus, G. [IPHC, Strasbourg (France); Cristinziani, M. [Universitaet Bonn (Germany); Costa, S. [INFN/University of Catania (Italy); D' Alessandro, R. [Department of Energetics/INFN Florence (Italy); Boer, W. de [Universitaet Karlsruhe, Karlsruhe (Germany); Dobos, D. [CERN, Geneva (Switzerland); Dolenc, I. [Jozef Stefan Institute, Ljubljana (Slovenia); Dulinski, W. [IPHC, Strasbourg (France); Duris, J. [UCLA, Los Angeles, CA (United States); Eremin, V. [Ioffe Institute, St. Petersburg (Russian Federation); Eusebi, R. [FNAL, Batavia (United States); Frais-Koelbl, H. [Fachhochschule fuer Wirtschaft und Technik, Wiener Neustadt (Austria)

    2011-04-21

    With the commissioning of the LHC in 2010 and upgrades expected in 2015, ATLAS and CMS are planning to upgrade their innermost tracking layers with radiation hard technologies. Chemical Vapor Deposition diamond has been used extensively in beam conditions monitors as the innermost detectors in the highest radiation areas of BaBar, Belle, CDF and all LHC experiments. This material is now being considered as a sensor material for use very close to the interaction region where the most extreme radiation conditions exist. Recently the RD42 collaboration constructed, irradiated and tested polycrystalline and single-crystal chemical vapor deposition diamond sensors to the highest fluences expected at the super-LHC. We present beam test results of chemical vapor deposition diamond up to fluences of 1.8x10{sup 16} protons/cm{sup 2} illustrating that both polycrystalline and single-crystal chemical vapor deposition diamonds follow a single damage curve. We also present beam test results of irradiated complete diamond pixel modules.

  2. Intensity modulated conformal radiotherapy

    International Nuclear Information System (INIS)

    Noel, Georges; Moty-Monnereau, Celine; Meyer, Aurelia; David, Pauline; Pages, Frederique; Muller, Felix; Lee-Robin, Sun Hae; David, Denis Jean

    2006-12-01

    This publication reports the assessment of intensity-modulated conformal radiotherapy (IMCR). This assessment is based on a literature survey which focussed on indications, efficiency and safety on the short term, on the risk of radio-induced cancer on the long term, on the role in the therapeutic strategy, on the conditions of execution, on the impact on morbidity-mortality and life quality, on the impact on the health system and on public health policies and program. This assessment is also based on the opinion of a group of experts regarding the technical benefit of IMCR, its indications depending on the cancer type, safety in terms of radio-induced cancers, and conditions of execution. Before this assessment, the report thus indicates indications for which the use of IMCR can be considered as sufficient or not determined. It also proposes a technical description of IMCR and helical tomo-therapy, discusses the use of this technique for various pathologies or tumours, analyses the present situation of care in France, and comments the identification of this technique in foreign classifications

  3. Living Systems Energy Module

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-26

    The Living Systems Energy Module, renamed Voyage from the Sun, is a twenty-lesson curriculum designed to introduce students to the major ways in which energy is important in living systems. Voyage from the Sun tells the story of energy, describing its solar origins, how it is incorporated into living terrestrial systems through photosynthesis, how it flows from plants to herbivorous animals, and from herbivores to carnivores. A significant part of the unit is devoted to examining how humans use energy, and how human impact on natural habitats affects ecosystems. As students proceed through the unit, they read chapters of Voyage from the Sun, a comic book that describes the flow of energy in story form (Appendix A). During the course of the unit, an ``Energy Pyramid`` is erected in the classroom. This three-dimensional structure serves as a classroom exhibit, reminding students daily of the importance of energy and of the fragile nature of our living planet. Interactive activities teach students about adaptations that allow plants and animals to acquire, to use and to conserve energy. A complete list of curricular materials and copies of all activity sheets appear in Appendix B.

  4. Modelling modulation perception : modulation low-pass filter or modulation filter bank?

    NARCIS (Netherlands)

    Dau, T.; Kollmeier, B.; Kohlrausch, A.G.

    1995-01-01

    In current models of modulation perception, the stimuli are first filtered and nonlinearly transformed (mostly half-wave rectified). In order to model the low-pass characteristic of measured modulation transfer functions, the next stage in the models is a first-order low-pass filter with a typical

  5. Superstability for Generalized Module Left Derivations and Generalized Module Derivations on a Banach Module (I

    Directory of Open Access Journals (Sweden)

    Huai-Xin Cao

    2009-01-01

    Full Text Available We discuss the superstability of generalized module left derivations and generalized module derivations on a Banach module. Let 𝒜 be a Banach algebra and X a Banach 𝒜-module, f:X→X and g:𝒜→𝒜. The mappings Δf,g1, Δf,g2, Δf,g3, and Δf,g4 are defined and it is proved that if ∥Δf,g1(x,y,z,w∥ (resp., ∥Δf,g3(x,y,z,w,α,β∥ is dominated by φ(x,y,z,w, then f is a generalized (resp., linear module-𝒜 left derivation and g is a (resp., linear module-X left derivation. It is also shown that if ∥Δf,g2(x,y,z,w∥ (resp., ∥Δf,g4(x,y,z,w,α,β∥ is dominated by φ(x,y,z,w, then f is a generalized (resp., linear module-𝒜 derivation and g is a (resp., linear module-X derivation.

  6. Coherent control of atoms and diatomic molecules with shaped ultrashort pulses; Manipulation coherente d'atomes et de molecules diatomiques avec des impulsions mises en forme

    Energy Technology Data Exchange (ETDEWEB)

    Degert, J

    2002-12-15

    This thesis deals with the theoretical and experimental study of coherent control of atomic and molecular systems with shaped pulses. At first, we present several experiments of control of coherent transients in rubidium. These transients appear when a two-level system is excited by a perturbative chirped pulse, and are characterized by oscillations in the excited state population. For a strong chirp, we show that a phase step in the spectrum modifies the phase of the oscillations. Then, by direct analogy with Fresnel zone lens, we conceive a chirped pulse with a highly modulated amplitude, allowing to suppress destructive contributions to the population transfer. In a second set of experiments, we focus on quantum path interferences in two-photon transitions excited by linearly chirped pulses. Owing to the broad bandwidth of ultrashort pulses, sequential and direct excitation paths contribute to the excited state population. Oscillations resulting from interferences between these two paths are observed in atomic sodium. Moreover, we show that they are observable whatever the sign of chirp. Theoretically, we study the control of the predissociation of a benchmark diatomic molecule: NaI. Predissociation leads to matter wave interferences in the fragments distribution. First, we show that a suitably chosen probe pulse allows the observation of theses interferences. Next, using a sequence of control pulse inducing electronic transition, we demonstrate the possibility to manipulate fragment energy distribution. (author)

  7. hybrid modulation scheme fo rid modulation scheme fo dulation

    African Journals Online (AJOL)

    eobe

    control technique is done through simulations and ex control technique .... HYBRID MODULATION SCHEME FOR CASCADED H-BRIDGE INVERTER CELLS. C. I. Odeh ..... and OR operations. Referring to ... MATLAB/SIMULINK environment.

  8. Reachability modules for the description logic SRIQ

    CSIR Research Space (South Africa)

    Nortje, R

    2013-12-01

    Full Text Available In this paper we investigate module extraction for the Description Logic SRIQ. We formulate modules in terms of the reachability problem for directed hypergraphs. Using inseperability relations, we investigate the module-theoretic properties...

  9. Coolant channel module CCM

    International Nuclear Information System (INIS)

    Hoeld, Alois

    2007-01-01

    A complete and detailed description of the theoretical background of an '(1D) thermal-hydraulic drift-flux based mixture-fluid' coolant channel model and its resulting module CCM will be presented. The objective of this module is to simulate as universally as possible the steady state and transient behaviour of the key characteristic parameters of a single- or two-phase fluid flowing within any type of heated or non-heated coolant channel. Due to the possibility that different flow regimes can appear along any channel, such a 'basic (BC)' 1D channel is assumed to be subdivided into a number of corresponding sub-channels (SC-s). Each SC can belong to only two types of flow regime, an SC with just a single-phase fluid, containing exclusively either sub-cooled water or superheated steam, or an SC with a two-phase mixture flow. After an appropriate nodalisation of such a BC (and therefore also its SC-s) a 'modified finite volume method' has been applied for the spatial discretisation of the partial differential equations (PDE-s) which represent the basic conservation equations of thermal-hydraulics. Special attention had to be given to the possibility of variable SC entrance or outlet positions (which describe boiling boundaries or mixture levels) and thus the fact that an SC can even disappear or be created anew. The procedure yields for each SC type (and thus the entire BC), a set of non-linear ordinary 1st order differential equations (ODE-s). To link the resulting mean nodal with the nodal boundary function values, both of which are present in the discretised differential equations, a special quadratic polygon approximation procedure (PAX) had to be constructed. Together with the very thoroughly tested packages for drift-flux, heat transfer and single- and two-phase friction factors this procedure represents the central part of the here presented 'Separate-Region' approach, a theoretical model which provides the basis to the very effective working code package CCM

  10. Photovoltaic module with adhesion promoter

    Science.gov (United States)

    Xavier, Grace

    2013-10-08

    Photovoltaic modules with adhesion promoters and methods for fabricating photovoltaic modules with adhesion promoters are described. A photovoltaic module includes a solar cell including a first surface and a second surface, the second surface including a plurality of interspaced back-side contacts. A first glass layer is coupled to the first surface by a first encapsulating layer. A second glass layer is coupled to the second surface by a second encapsulating layer. At least a portion of the second encapsulating layer is bonded directly to the plurality of interspaced back-side contacts by an adhesion promoter.

  11. High Order Modulation Protograph Codes

    Science.gov (United States)

    Nguyen, Thuy V. (Inventor); Nosratinia, Aria (Inventor); Divsalar, Dariush (Inventor)

    2014-01-01

    Digital communication coding methods for designing protograph-based bit-interleaved code modulation that is general and applies to any modulation. The general coding framework can support not only multiple rates but also adaptive modulation. The method is a two stage lifting approach. In the first stage, an original protograph is lifted to a slightly larger intermediate protograph. The intermediate protograph is then lifted via a circulant matrix to the expected codeword length to form a protograph-based low-density parity-check code.

  12. Light intensity modulation in phototherapy

    Science.gov (United States)

    Lukyanovich, P. A.; Zon, B. A.; Kunin, A. A.; Pankova, S. N.

    2015-04-01

    A hypothesis that blocking ATP synthesis is one of the main causes of the stimulating effect is considered based on analysis of the primary photostimulation mechanisms. The light radiation intensity modulation is substantiated and the estimates of such modulation parameters are made. An explanation is offered to the stimulation efficiency decrease phenomenon at the increase of the radiation dose during the therapy. The results of clinical research of the medical treatment in preventive dentistry are presented depending on the spectrum and parameters of the light flux modulation.

  13. Complex Wavelet Based Modulation Analysis

    DEFF Research Database (Denmark)

    Luneau, Jean-Marc; Lebrun, Jérôme; Jensen, Søren Holdt

    2008-01-01

    Low-frequency modulation of sound carry important information for speech and music. The modulation spectrum i commonly obtained by spectral analysis of the sole temporal envelopes of the sub-bands out of a time-frequency analysis. Processing in this domain usually creates undesirable distortions...... polynomial trends. Moreover an analytic Hilbert-like transform is possible with complex wavelets implemented as an orthogonal filter bank. By working in an alternative transform domain coined as “Modulation Subbands”, this transform shows very promising denoising capabilities and suggests new approaches for joint...

  14. Induced modules over group algebras

    CERN Document Server

    Karpilovsky, Gregory

    1990-01-01

    In 1898 Frobenius discovered a construction which, in present terminology, associates with every module of a subgroup the induced module of a group. This construction proved to be of fundamental importance and is one of the basic tools in the entire theory of group representations.This monograph is designed for research mathematicians and advanced graduate students and gives a picture of the general theory of induced modules as it exists at present. Much of the material has until now been available only in research articles. The approach is not intended to be encyclopedic, rather each topic is

  15. Improved ATIR concentrator photovoltaic module

    Science.gov (United States)

    Adriani, Paul M.; Mao, Erwang

    2013-09-01

    Novel aggregated total internal reflection (ATIR) concentrator photovoltaic module design comprises 2-D shaped primary and secondary optics that effectively combine optical efficiency, low profile, convenient range of acceptance angles, reliability, and manufacturability. This novel optical design builds upon previous investigations by improving the shapes of primary and secondary optics to enable improved long-term reliability and manufacturability. This low profile, low concentration (5x to 10x) design fits well with one-axis trackers that are often used for flat plate crystalline silicon photovoltaic modules in large scale ground mount installations. Standard mounting points, materials, and procedures apply without changes from flat plate modules.

  16. Ammonia corrodes solar modules; Salmiakgeist greift Module an

    Energy Technology Data Exchange (ETDEWEB)

    Petzold, Katrin

    2011-07-01

    Ammonia is an aggressive gas produced in animal shelters, which may cause corrosion of solar modules. Various institutions, e.g. DLG and TUeV Rheinland, therefore offer an ammonia test for solar modules. The TUeV Rheinland recently commissioned a walk-in test chamber and now issues an official seal of approval, while the DLG doubts the practical value of the test.

  17. Modulation of lymphopoiesis

    Energy Technology Data Exchange (ETDEWEB)

    Rosse, C.

    1991-01-01

    During the current project period we have demonstrated correspondence between animal models and in vitro models of modulated lymphopoiesis. Our finding that G-CSF, a growth factor for neutrophil granulocytes, suppresses lymphopoiesis in long term bone marrow cultures (LTBMC) has important implications both for understanding the regulatory mechanisms of hemopoiesis and for clinical use of recombinant growth factors that are beginning to be widely used for the treatment of a variety of diseases. During the present project period we adopted LTBMC systems developed by others for the purposes of our specific aims. Also we developed a novel long term culture system for NK cells. The discovery of a new growth factor, O-CSF, specific for osteoclasts and the establishment of a clonal assay system that provides evidence for a new class of hemopoietic progenitor cells, the osteoclast progenitor, are important contributions. Given the important role T cells play in the immune response and in the regulation of other lymphohemopoietic cell lineages through the lymphokines they secrete, the need for an in vitro system that lends itself to the analysis of T cell maturation and to the testing of factors that may adversely affect T lymphopoiesis cannot be overemphasized. We believe that we can exploit an advantageous set of circumstances that present an excellent opportunity for initiating a focused experimental program for developing such a system. By a systematic and selective analysis of molecular interactions between heterogenous thymic stromal cells and T cell progenitors at different stages of maturation, it will be possible for our program to define the complement of critical cellular interactions on which successive stages of T lymphopoiesis depend. The experiments we propose will lay a rational foundation for the development of a long term culture system for T lymphopoiesis. 24 refs., 7 figs.

  18. Cosmic ray modulation

    Science.gov (United States)

    Agarwal Mishra, Rekha; Mishra, Rajesh Kumar

    2016-07-01

    Propagation of cosmic rays to and inside the heliosphere, encounter an outward moving solar wind with cyclic magnetic field fluctuation and turbulence, causing convection and diffusion in the heliosphere. Cosmic ray counts from the ground ground-based neutron monitors at different cut of rigidity show intensity changes, which are anti-correlated with sunspot numbers. They also lose energy as they propagate towards the Earth and experience various types of modulations due to different solar activity indices. In this work, we study the first three harmonics of cosmic ray intensity on geo-magnetically quiet days over the period 1965-2014 for Beijing, Moscow and Tokyo neutron monitoring stations located at different cut off rigidity. The amplitude of first harmonic remains high for low cutoff rigidity as compared to high cutoff rigidity on quiet days. The diurnal amplitude significantly decreases during solar activity minimum years. The diurnal time of maximum significantly shifts to an earlier time as compared to the corotational direction having different cutoff rigidities. The time of maximum for first harmonic significantly shifts towards later hours and for second harmonic it shifts towards earlier hours at low cutoff rigidity station as compared to the high cut off rigidity station on quiet days. The amplitude of second/third harmonics shows a good positive correlation with solar wind velocity, while the others (i.e. amplitude and phase) have no significant correlation on quiet days. The amplitude and direction of the anisotropy on quiet days does not show any significant dependence on high-speed solar wind streams for these neutron monitoring stations of different cutoff rigidity threshold. Keywords: cosmic ray, cut off rigidity, quiet days, harmonics, amplitude, phase.

  19. Multiplication modules over non-commutative rings

    International Nuclear Information System (INIS)

    Tuganbaev, A A

    2003-01-01

    It is proved that each submodule of a multiplication module over a regular ring is a multiplicative module. If A is a ring with commutative multiplication of right ideals, then each projective right ideal is a multiplicative module, and a finitely generated A-module M is a multiplicative module if and only if all its localizations with respect to maximal right ideals of A are cyclic modules over the corresponding localizations of A. In addition, several known results on multiplication modules over commutative rings are extended to modules over not necessarily commutative rings

  20. Multilevel Modulation formats for Optical Communication

    DEFF Research Database (Denmark)

    Jensen, Jesper Bevensee

    2008-01-01

    This thesis studies the use of multilevel modulation formats for optical communication systems. Multilevel modulation is an attractive method of increasing the spectral efficiency of optical communication systems. Various modulation formats employing phase modulation, amplitude modulation...... or a combination of the two have been studied. The use of polarization multiplexing (PolMux) to double the bit rate has also been investigated. The impact of transmission impairments such as chromatic dispersion, self phase modulation and cross phase modulation has been investigated. The feasibility of multilevel...... modulation for network oriented scenarios has been demonstrated....

  1. L’Amleto d’Arrigo Boito : deux versions énigmatiques avec Ducis et Dumas en dialogue Arrigo Boito’s Amleto: Two Enigmatic Versions Reversing Ducis and Changing Dumas

    Directory of Open Access Journals (Sweden)

    Costantino Maeder

    2011-12-01

    Full Text Available Le XIXe siècle est caractérisé par la redécouverte de Shakespeare. Cet article présente un exemple complexe de la réception de Shakespeare en France et en Italie: Hamlet a été à plusieurs reprises traduit et adapté à la scène et à l’opéra. Les traductions étaient pourtant loin d’être fidèles, ce qui n’était par contre pas le cas en Allemagne, si l’on pense à la traduction toujours apprécié des frères Schlegel. Ducis, par exemple, présente une histoire tout à fait incompatible avec le chef-d’œuvre de Shakespeare. Aussi Dumas père, bien qu’aidé par un traducteur, ne suit pas du tout l’original. Pourtant, ces deux versions, de même que leurs autres traductions, conditionneront longtemps la réception de Shakespeare dans les pays de l’Europe latine. Arrigo Boito offrira une version tout à fait autonome de l’Amleto, une désécriture d’auteur qui dialogue avec la version de Ducis, de Dumas, mais aussi avec les vraies traductions de Paul Meurice et de François-Victor Hugo.The 19th century is characterized by the rediscovery of Shakespeare. In this article, we will trace one complex example of Shakespeare’s reception in France and in Italy. Hamlet had been translated and adapted for the stage and for the opera several times. However, from the very beginning of the 18th century, authors like Ducis simply rewrote from scratch totally unauthentic versions which (misguided most French and Italian reception of Shakespeare. In the 19th century, Dumas offered a new and far more interesting interpretation which would be even more seminal for Latin Europe. Arrigo Boito’s Amleto dialogues in a rather astonishing and surprisingly modern way with the Dumas version of Hamlet, taking into account the more recent translations by François-Victor Hugo and Paul Meurice. As a result, the tragedy of the Danish prince is completely rewritten and deconstructed. As is often the case, Boito prefers to be the dwarf that

  2. Complexation des acides aminés basiques arginine, histidine et lysine avec l'ADN plasmidique en solution aqueuse : participation à la capture de radicaux sous irradiation X à 1,5 keV

    Science.gov (United States)

    Tariq Khalil, Talat; Taillefumier, Baptiste; Boulanouar, Omar; Mavon, Christophe; Fromm, Michel

    2016-09-01

    L'environnement chimique de l'ADN en situation biologique est complexe notam-ment en raison de la présence d'histones, protéines nucléaires, associées en quantité approximativement égales à l'ADN pour former la chromatine. Les histones possèdent de nombreux radicaux basiques arginine et lysine chargés positivement et dont la majorité se trouve sur les chaînes émergentes, l'ADN présente quant à lui des charges négatives sur ses groupements phosphates localisés tout au long de la double hélice. Dans cette étude, la complexité de la structure de la chromatine nucléaire est dans un premier temps mimée en solution aqueuse par la formation de complexes entre un ADN plasmidique sonde et les trois acides aminés basiques, Arg, His, Lys, qui, mis à part His, sont protonés au pH physiologique. Ces acides aminés libres en solution sont réputés être des capteurs efficaces de radicaux libres, notamment pour le radical hydroxyle, conférant ainsi un pouvoir protecteur vis-à-vis des effets indirects sur l'ADN en situation d'exposition aux rayonnements ionisants. A concentration fixée, les capacités de capture des acides aminés libres, σ, pour le radical hydroxyle sont typiquement les suivantes σHis ≈σArg > σLys (σLys ≈ 0,1 × σArg). Nous avons mesuré les taux de cassures simple brin par plasmide et par Gray (χ) lors d'expositions de solutions aqueuses de complexes [acide aminé - ADN plasmidique] aux rayons X ultra-mous (1,5 keV). A concentrations égales, les trois acides aminés complexés et présents en large excès ne manifestent pas une capacité de protection de l'ADN proportionnelle à leur capacité de capture libre et en solution ; on trouve en effet des taux de cassures dans l'ordre suivant χHis > χArg > χLys (χLys ≈ 0,01 χArg). Après avoir détaillé le mode opératoire de ces mesures, nous analyserons sur des bases bibliographiques, les modes spécifiques d'interaction des acides aminés basiques avec l'ADN. La sp

  3. Photovoltaic Module Qualification Plus Testing

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Sarah [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wohlgemuth, John [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kempe, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bosco, Nick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hacke, Peter [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jordan, Dirk [National Renewable Energy Lab. (NREL), Golden, CO (United States); Miller, David C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Silverman, Timothy J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Phillips, Nancy [3M Company, Maplewood, MN (United States); Earnest, Thomas [DuPont, Wilmington, DE (United States); Romero, Ralph [Black & Veatch, Overland Park, KS (United States)

    2013-12-01

    This report summarizes a set of test methods that are in the midst of being incorporated into IEC 61215 for certification of a module design or other tests that go beyond certification to establish bankability.

  4. Graphene based terahertz phase modulators

    Science.gov (United States)

    Kakenov, N.; Ergoktas, M. S.; Balci, O.; Kocabas, C.

    2018-07-01

    Electrical control of amplitude and phase of terahertz radiation (THz) is the key technological challenge for high resolution and noninvasive THz imaging. The lack of active materials and devices hinders the realization of these imaging systems. Here, we demonstrate an efficient terahertz phase and amplitude modulation using electrically tunable graphene devices. Our device structure consists of electrolyte-gated graphene placed at quarter wavelength distance from a reflecting metallic surface. In this geometry, graphene operates as a tunable impedance surface which yields electrically controlled reflection phase. Terahertz time domain reflection spectroscopy reveals the voltage controlled phase modulation of π and the reflection modulation of 50 dB. To show the promises of our approach, we demonstrate a multipixel phase modulator array which operates as a gradient impedance surface.

  5. Interfacial reactions in thermoelectric modules

    KAUST Repository

    Wu, Hsin-jay; Wu, Albert T.; Wei, Pei-chun; Chen, Sinn-wen

    2018-01-01

    Engineering transport properties of thermoelectric (TE) materials leads to incessantly breakthroughs in the zT values. Nevertheless, modular design holds a key factor to advance the TE technology. Herein, we discuss the structures of TE module

  6. Frequency-Modulation Correlation Spectrometer

    Science.gov (United States)

    Margolis, J. S.; Martonchik, J. V.

    1985-01-01

    New type of correlation spectrometer eliminates need to shift between two cells, one empty and one containing reference gas. Electrooptical phase modulator sinusoidally shift frequencies of sample transmission spectrum.

  7. An Embedded Reconfigurable Logic Module

    Science.gov (United States)

    Tucker, Jerry H.; Klenke, Robert H.; Shams, Qamar A. (Technical Monitor)

    2002-01-01

    A Miniature Embedded Reconfigurable Computer and Logic (MERCAL) module has been developed and verified. MERCAL was designed to be a general-purpose, universal module that that can provide significant hardware and software resources to meet the requirements of many of today's complex embedded applications. This is accomplished in the MERCAL module by combining a sub credit card size PC in a DIMM form factor with a XILINX Spartan I1 FPGA. The PC has the ability to download program files to the FPGA to configure it for different hardware functions and to transfer data to and from the FPGA via the PC's ISA bus during run time. The MERCAL module combines, in a compact package, the computational power of a 133 MHz PC with up to 150,000 gate equivalents of digital logic that can be reconfigured by software. The general architecture and functionality of the MERCAL hardware and system software are described.

  8. Modulational instability of coupled waves

    International Nuclear Information System (INIS)

    McKinstrie, C.J.; Bingham, R.

    1989-01-01

    The collinear propagation of an arbitrary number of finite-amplitude waves is modeled by a system of coupled nonlinear Schroedinger equations; one equation for each complex wave amplitude. In general, the waves are modulationally unstable with a maximal growth rate larger than the modulational growth rate of any wave alone. Moreover, waves that are modulationally stable by themselves can be driven unstable by the nonlinear coupling. The general theory is then applied to the relativistic modulational instability of two laser beams in a beat-wave accelerator. For parameters typical of a proposed beat-wave accelerator, this instability can seriously distort the incident laser pulse shapes on the particle-acceleration time scale, with detrimental consequences for particle acceleration

  9. Bigelow Expandable Activity Module Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Bigelow Expandable Activity Module (BEAM) project is a NASA-industry partnership with Bigelow Aerospace (BA) that has developing the first human-rated expandable...

  10. US ITER limiter module design

    International Nuclear Information System (INIS)

    Mattas, R.F.; Billone, M.; Hassanein, A.

    1996-08-01

    The recent U.S. effort on the ITER (International Thermonuclear Experimental Reactor) shield has been focused on the limiter module design. This is a multi-disciplinary effort that covers design layout, fabrication, thermal hydraulics, materials evaluation, thermo- mechanical response, and predicted response during off-normal events. The results of design analyses are presented. Conclusions and recommendations are also presented concerning, the capability of the limiter modules to meet performance goals and to be fabricated within design specifications using existing technology

  11. Defining Modules, Modularity and Modularization

    DEFF Research Database (Denmark)

    Miller, Thomas Dedenroth; Pedersen, Per Erik Elgård

    The paper describes the evolution of the concept of modularity in a historical perspective. The main reasons for modularity are: create variety, utilize similarities, and reduce complexity. The paper defines the terms: Module, modularity, and modularization.......The paper describes the evolution of the concept of modularity in a historical perspective. The main reasons for modularity are: create variety, utilize similarities, and reduce complexity. The paper defines the terms: Module, modularity, and modularization....

  12. Laser modulator for LISA pathfinder

    Science.gov (United States)

    Voland, C.; Lund, G.; Coppoolse, W.; Crosby, P.; Stadler, M.; Kudielka, K.; Özkan, C.

    2017-11-01

    LISA Pathfinder is an ESA experiment to demonstrate the key technologies needed for the LISA mission to detect gravitational waves in space. The LISA Pathfinder spacecraft represents one arm of the LISA interferometer, containing an optical metrology system and two proof masses as inertial references for the drag-free control system. The LISA Pathfinder payload consists of two drag-free floating test masses located in the inertial sensors with their control electronics and an optical metrology subsystem. The optical metrology subsystem monitors the movement of both test masses relative to each other and to the spacecraft with very high sensitivity and resolution. This is achieved with a heterodyne Mach- Zehnder interferometer. This interferometer requires as input two coherent laser beams with a heterodyne frequency difference of a few kHz. To generate the two laser beams with a heterodyne frequency difference a Nd:YAG laser is used together with the Laser Modulator. The Nd:YAG laser generates a single coherent laser signal at a wavelength of 1064nm which is fibre coupled to the Laser Modulator. The Laser Modulator then generates the two optical beams with the required heterodyne frequency offset. In addition, the Laser Modulator is required to perform laser amplitude stabilization and optical path difference control for the two optical signals. The Laser Modulator consists of an optical unit - the LMU - and RF synthesiser, power amplification and control electronics. These electronics are all housed in the Laser Modulator Electronics (LME). The LMU has four primary functions: • Splitting of the input laser beam into two paths for later superposition in the interferometer. • Applying different frequency shifts to each of the beams. • Providing amplitude modulation control to each of the beams. • Providing active control of the optical path length difference between the two optical paths. The present paper describes the design and performance of the LMU

  13. Installing Python Modules with pip

    OpenAIRE

    Fred Gibbs

    2013-01-01

    This lesson shows you how to download and install Python modules. There are many ways to install external modules, but for the purposes of this lesson, we’re going to use a program called pip. As of Python 2.7.9 and newer, pip is installed by default. This tutorial will be helpful for anyone using older versions of Python (which are still quite common).

  14. Intelligent spacecraft module

    Science.gov (United States)

    Oungrinis, Konstantinos-Alketas; Liapi, Marianthi; Kelesidi, Anna; Gargalis, Leonidas; Telo, Marinela; Ntzoufras, Sotiris; Paschidi, Mariana

    2014-12-01

    The paper presents the development of an on-going research project that focuses on a human-centered design approach to habitable spacecraft modules. It focuses on the technical requirements and proposes approaches on how to achieve a spatial arrangement of the interior that addresses sufficiently the functional, physiological and psychosocial needs of the people living and working in such confined spaces that entail long-term environmental threats to human health and performance. Since the research perspective examines the issue from a qualitative point of view, it is based on establishing specific relationships between the built environment and its users, targeting people's bodily and psychological comfort as a measure toward a successful mission. This research has two basic branches, one examining the context of the system's operation and behavior and the other in the direction of identifying, experimenting and formulating the environment that successfully performs according to the desired context. The latter aspect is researched upon the construction of a scaled-model on which we run series of tests to identify the materiality, the geometry and the electronic infrastructure required. Guided by the principles of sensponsive architecture, the ISM research project explores the application of the necessary spatial arrangement and behavior for a user-centered, functional interior where the appropriate intelligent systems are based upon the existing mechanical and chemical support ones featured on space today, and especially on the ISS. The problem is set according to the characteristics presented at the Mars500 project, regarding the living quarters of six crew-members, along with their hygiene, leisure and eating areas. Transformable design techniques introduce spatial economy, adjustable zoning and increased efficiency within the interior, securing at the same time precise spatial orientation and character at any given time. The sensponsive configuration is

  15. Wide-range voltage modulation

    International Nuclear Information System (INIS)

    Rust, K.R.; Wilson, J.M.

    1992-06-01

    The Superconducting Super Collider's Medium Energy Booster Abort (MEBA) kicker modulator will supply a current pulse to the abort magnets which deflect the proton beam from the MEB ring into a designated beam stop. The abort kicker will be used extensively during testing of the Low Energy Booster (LEB) and the MEB rings. When the Collider is in full operation, the MEBA kicker modulator will abort the MEB beam in the event of a malfunction during the filling process. The modulator must generate a 14-μs wide pulse with a rise time of less than 1 μs, including the delay and jitter times. It must also be able to deliver a current pulse to the magnet proportional to the beam energy at any time during ramp-up of the accelerator. Tracking the beam energy, which increases from 12 GeV at injection to 200 GeV at extraction, requires the modulator to operate over a wide range of voltages (4 kV to 80 kV). A vacuum spark gap and a thyratron have been chosen for test and evaluation as candidate switches for the abort modulator. Modulator design, switching time delay, jitter and pre-fire data are presented

  16. Research on modulated structure alloys

    International Nuclear Information System (INIS)

    Tsujimoto, Tokuzo; Saito, Kazuo; Hashimoto, Kenki

    1982-01-01

    Research was carried out for the purposes of clarifying the cause of modulated structure formation, developing the structure control method utilizing modulated structure and clarifying the suitability of modulated structure alloys as radiation damage-resisting materials. The research on structure control method encountered a difficulty in the analysis of experimental results, bu the following results were obtained in the other items. The method of solving a diffusion equation including a nonlinear term was found in course of the clarification of the cause of modulated structure formation. As a means of detecting faint unevenness in solid solution, of which the deviation of composition is a few %, the structure analysis method utilizing magnetic property was developed. This method was applied to Ni-9.6 at.% Ti alloy, and the process of expanding amplitude in composition variation in spinodal decomposition and the formation of solute atomshort region at the time of nucleation-growth were confirmed. Utilizing the high energy electron beam generated in a superhigh voltage electron microscope, electron beam irradiation experiment was carried out on precipitation hardening alloys with modulated structure. As the result, it was found that in Ni-Ti alloy, the amount of void swelling resistance showed the change with the increase of modulated structure period. (Kako, I.)

  17. Customized PEC modules. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, Martin B. (DTI, Taastrup (Denmark))

    2012-07-01

    The purpose of the project ''Customized PEC modules'' was to move from the production hand-made individual DSCs (dye-sensitized solar cells) in the laboratory to the production of DSC modules in a semi-automated process. At the same time allowing sufficient variation in the product's specification for real tailoring of the product to the application. The tailoring can be related to the module's electrical output and size, but also to the possibility of designing patterns for decoration or communication purposes by playing around with the shape, size and layout of the individual cells forming the module. This was to be accomplished mainly by screen printing of DSC components on glass substrates at Mekoprint. For reaching this goal the work was divided into a number of steps. The central part of the work done was in the initial conception activity and the following manufacturing activity. An activity regarding optimization included several tasks of optimization and adaptation of the existing laboratory process for manufacturing of the DSCs. Finally, work focused on international activities was done. All the steps needed for the production of customized DSC modules have been demonstrated in this project. In combination with the development of a high performing printable sealant and sealing method all the prerequisites for producing customized DSC modules have been demonstrated. (LN)

  18. ITER Central Solenoid Module Fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Smith, John [General Atomics, San Diego, CA (United States)

    2016-09-23

    The fabrication of the modules for the ITER Central Solenoid (CS) has started in a dedicated production facility located in Poway, California, USA. The necessary tools have been designed, built, installed, and tested in the facility to enable the start of production. The current schedule has first module fabrication completed in 2017, followed by testing and subsequent shipment to ITER. The Central Solenoid is a key component of the ITER tokamak providing the inductive voltage to initiate and sustain the plasma current and to position and shape the plasma. The design of the CS has been a collaborative effort between the US ITER Project Office (US ITER), the international ITER Organization (IO) and General Atomics (GA). GA’s responsibility includes: completing the fabrication design, developing and qualifying the fabrication processes and tools, and then completing the fabrication of the seven 110 tonne CS modules. The modules will be shipped separately to the ITER site, and then stacked and aligned in the Assembly Hall prior to insertion in the core of the ITER tokamak. A dedicated facility in Poway, California, USA has been established by GA to complete the fabrication of the seven modules. Infrastructure improvements included thick reinforced concrete floors, a diesel generator for backup power, along with, cranes for moving the tooling within the facility. The fabrication process for a single module requires approximately 22 months followed by five months of testing, which includes preliminary electrical testing followed by high current (48.5 kA) tests at 4.7K. The production of the seven modules is completed in a parallel fashion through ten process stations. The process stations have been designed and built with most stations having completed testing and qualification for carrying out the required fabrication processes. The final qualification step for each process station is achieved by the successful production of a prototype coil. Fabrication of the first

  19. Module-theoretic properties of reachability modules for SRIQ

    CSIR Research Space (South Africa)

    Nortje, R

    2013-07-01

    Full Text Available ]. Definition 1. (Module for the arbitrary DL L) Let L be an arbitrary de- scription language, O an L ontology, and σ a statement formulated in L. Then, 2 O′ ⊆ O is a module for σ in O(a σ-module in O) whenever: O |= σ if and only if O′ |= σ. Definition 1... > 1, a SRIQ TBox T is in normal form if every axiom α ∈ T is in one of the following forms: α1: B1 u . . . uBn v C1 unionsq . . . unionsq Cm α2: D v C1 unionsq . . . unionsq Cm α3: B1 u . . . uBn v D α4: R1 ◦ . . . ◦Rn v Rn+1 α5: R1 v R2 α6: D1 v D2 α7...

  20. Laser frequency modulator for modulating a laser cavity

    Science.gov (United States)

    Erbert, Gaylen V.

    1992-01-01

    The present invention relates to a laser frequency modulator for modulating a laser cavity. It is known in the prior art to utilize a PZT (piezoelectric transducer) element in combination with a mirror to change the cavity length of a laser cavity (which changes the laser frequency). Using a PZT element to drive the mirror directly is adequate at frequencies below 10 kHz. However, in high frequency applications (100 kHz and higher) PZT elements alone do not provide a sufficient change in the cavity length. The present invention utilizes an ultrasonic concentrator with a PZT element and mirror to provide modulation of the laser cavity. With an ultrasonic concentrator, the mirror element at the end of a laser cavity can move at larger amplitudes and higher frequencies.

  1. Feasibility of photovoltaic: thermoelectric hybrid modules

    NARCIS (Netherlands)

    van Sark, W.G.J.H.M.|info:eu-repo/dai/nl/074628526

    2011-01-01

    Outdoor performance of photovoltaic (PV) modules suffers from elevated temperatures. Conversion efficiency losses of up to about 25% can result, depending on the type of integration of the modules in the roof. Cooling of modules would therefore enhance annual PV performance. Instead of module

  2. 47 CFR 74.663 - Modulation limits.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Modulation limits. 74.663 Section 74.663 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO... Stations § 74.663 Modulation limits. If amplitude modulation is employed, negative modulation peaks shall...

  3. Medical Terminology: Suffixes. Health Occupations Education Module.

    Science.gov (United States)

    Temple Univ., Philadelphia, PA. Div. of Vocational Education.

    This module on medical terminology (suffixes) is one of 17 modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. This module consists of an introduction to the module topic, a list of resources needed, and three learning experiences. The first two learning…

  4. Low-cost solar module manufacturing

    International Nuclear Information System (INIS)

    Little, Roger G.; Nowlan, Michael J.; Matthei, Keith W.; Darkazalli, Ghazi

    1997-01-01

    As the market for terrestrial photovoltaic modules expands beyond the 80 MW per year level, module manufacturers are adopting a number of cost-reduction strategies, including the use of higher throughput equipment, increased process automation, and the fabrication of larger area cells and modules. This paper reviews recent activities at Spire Corporation in the development of advanced module manufacturing and testing equipment

  5. Health Occupations Module. The Integumentary System.

    Science.gov (United States)

    Temple Univ., Philadelphia, PA. Div. of Vocational Education.

    This module on the integumentary system is one of eight modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. This module contains an introduction to the module topic, objectives (e.g., list and describe the types of glands formed in the skin, and explain the…

  6. Weakly distributive modules. Applications to supplement submodules

    Indian Academy of Sciences (India)

    Abstract. In this paper, we define and study weakly distributive modules as a proper generalization of distributive modules. We prove that, weakly distributive supplemented modules are amply supplemented. In a weakly distributive supplemented module every submodule has a unique coclosure. This generalizes a result of ...

  7. Comportment of various magnesium alloys in carbon dioxide under pressure, between 400 and 600 deg; Compatibilite de divers alliages de magnesium avec le gaz carbonique sous pression entre 400 et 600 deg

    Energy Technology Data Exchange (ETDEWEB)

    Darras, R; Baque, P; Chevilliard, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    'magnesium oxyde fritte'. Les echantillons, preleves dans des produits files, sont convenablement polis, deux etats de surface reproductibles etant realises a titre comparatif. Les essais ont ete effectues dans le gaz carbonique purifie, aux pressions de 25 et 60 atmospheres, et a des temperatures allant de 400 a 600, au moyen d'autoclaves speciaux en acier inoxydable, chauffes exterieurement. Leur duree est en general superieure a 1000 heures. Les equations des courbes d'augmentation de poids obtenues sont du type ({delta}p){sup n} = k.t (({delta}p en mg/cm{sup 2} et t en heures), l'exposant n etant voisin de 2, du moins jusqu'a 500 deg. C. En se referant a des resultats precedemment acquis quant a certains de ces materiaux exposes dans le gaz carbonique sous pression atmospherique et sous 15 atmospheres, il apparait que: 1) Pour un materiau determine: - a une pression donnee, l'oxydation augmente avec la temperature, - a une temperature donnee, l'oxydation augmente avec la pression, - dans les memes conditions de temperature et de pression, les resultats obtenus varient peu suivant les deux etats de surface etudies; 2) les alliages Mg-Zr presentent une resistance a l'oxydation amelioree par rapport au magnesium non allie; 3) l'alliage magnox est beaucoup moins avantageux dans le gaz carbonique que dans l'air, par rapport aux autres alliages. D'une facon generale, les courbes d'oxydation tendant vers un palier apres un certain temps d'exposition, la compatibilite de tous les alliages consideres avec le gaz carbonique apparait satisfaisante jusqu'a une temperature voisine de 500 deg. C, dans les conditions operatoires presentement definies; au dessus de 500 deg. C, des differences notables apparaissent entre les divers alliages, mais des phenomenes de sublimation interferent avec ceux d'oxydation, de sorte qu'un classement des divers materiaux ne peut etre base que sur leur resultante. (auteur)

  8. Development of an analogue multiplexed regulation for periodic 1. order delayed processes; Etude et realisation d'une regulation analogique multiplexee pour processus aperiodiques du 1. ordre avec retard pur

    Energy Technology Data Exchange (ETDEWEB)

    Amblard, J C [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-07-15

    The present note deals with the study regulations of the sampled type, for 1. order process with simple delay. In order to obtain a good stability in such regulations, together with acceptable performances, it is interesting to use polynomial type correctors acting directly on the sampled error signals. The active elements of these correctors can be shared by all the channels to be controlled. Furthermore, the determination of the correction parameters results from an optimal study of the system. In the second part is described the construction of a multiplexed regulation for diffusion ovens. (author) [French] La presente note concerne l'etude des regulations de type echantillonne, pour processus du 1. ordre avec retard pur. Pour obtenir une bonne stabilite de telles regulations, ainsi que des performances correcte il est interessant d'utiliser des correcteurs de type polynomial, agissant directement sur les signaux d'erreur echantillonnes. Les elements actifs de ces correcteurs peuvent etre pris communs a toutes les voies a controler. D'autre part, la determination des parametres de correction decoula d'une etude optimale du systeme. Dans une seconde partie on decrit la realisation d'une regulation multiplexee de fours a diffusion. (auteur)

  9. Development of an analogue multiplexed regulation for periodic 1. order delayed processes; Etude et realisation d'une regulation analogique multiplexee pour processus aperiodiques du 1. ordre avec retard pur

    Energy Technology Data Exchange (ETDEWEB)

    Amblard, J.C. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-07-15

    The present note deals with the study regulations of the sampled type, for 1. order process with simple delay. In order to obtain a good stability in such regulations, together with acceptable performances, it is interesting to use polynomial type correctors acting directly on the sampled error signals. The active elements of these correctors can be shared by all the channels to be controlled. Furthermore, the determination of the correction parameters results from an optimal study of the system. In the second part is described the construction of a multiplexed regulation for diffusion ovens. (author) [French] La presente note concerne l'etude des regulations de type echantillonne, pour processus du 1. ordre avec retard pur. Pour obtenir une bonne stabilite de telles regulations, ainsi que des performances correcte il est interessant d'utiliser des correcteurs de type polynomial, agissant directement sur les signaux d'erreur echantillonnes. Les elements actifs de ces correcteurs peuvent etre pris communs a toutes les voies a controler. D'autre part, la determination des parametres de correction decoula d'une etude optimale du systeme. Dans une seconde partie on decrit la realisation d'une regulation multiplexee de fours a diffusion. (auteur)

  10. Whole Module Offgas Test Report: Space-X Dragon Module

    Science.gov (United States)

    James, John T.

    2012-01-01

    Between 7 April and 11 April 2012 a chemist from the JSC Toxicology Group acquired samples of air in 500 ml evacuated canisters from the sealed Dragon Module at the Space-X facility at KSC. Three samples were taken of facility air (two before the test and one after the test), and a total of 9 samples were taken from the sealed module in triplicate at the following times: 0 hours, 48 hours, and 96 hours. The module contained 470 kg, which was 100% of the mass to be launched. Analytical data contained in the Toxicology Group Report (attached) show that the ambient facility air was clean except for almost 9 milligrams per cubic meter of isopropanol (IPA) in the sample taken at the end of the test. Space-X must ensure that IPA is not introduced into the module before it is sealed for launch. Other minor contaminants in the ambient air included the following: perfluoro(2-methyl)pentane and hexamethylcyclotrisiloxane. The first-acquired samples of each triplicate from the module were not analyzed. Analyses of pairs of samples that were taken during the test show excellent agreement between the pairs and a linear increase in the T-values during the 4 days of the test (figure below). The rate of increase averaged 0.124 T units per day. If the time from last purge of the module on the ground to crew first entry on orbit is 10 days, then the T value at first entry should be less than 1.2 units, which is well below the criterion of 3.0 for consideration of additional protection of the crew from offgas products. The primary contributors were as follows: trimethylsilanol (0.057), fluorotrimethylsilane (0.047), acetaldehyde (0.004), hexamethylcyclopentasiloxane (0.003), and toluene (0.002).

  11. Steps in Modular Specifications for Concurrent Modules

    DEFF Research Database (Denmark)

    Da Rocha Pinto, Pedro; Dinsdale-Young, Thomas; Gardner, Philippa

    2015-01-01

    The specification of a concurrent program module is a difficult problem. The specifications must be strong enough to enable reasoning about the intended clients without reference to the underlying module implementation. We survey a range of verification techniques for specifying concurrent module......, in particular highlighting four key concepts: auxiliary state, interference abstraction, resource ownership and atomicity. We show how these concepts combine to provide powerful approaches to specifying concurrent modules.......The specification of a concurrent program module is a difficult problem. The specifications must be strong enough to enable reasoning about the intended clients without reference to the underlying module implementation. We survey a range of verification techniques for specifying concurrent modules...

  12. Photovoltaic cell module and method of forming

    Science.gov (United States)

    Howell, Malinda; Juen, Donnie; Ketola, Barry; Tomalia, Mary Kay

    2017-12-12

    A photovoltaic cell module, a photovoltaic array including at least two modules, and a method of forming the module are provided. The module includes a first outermost layer and a photovoltaic cell disposed on the first outermost layer. The module also includes a second outermost layer disposed on the photovoltaic cell and sandwiching the photovoltaic cell between the second outermost layer and the first outermost layer. The method of forming the module includes the steps of disposing the photovoltaic cell on the first outermost layer, disposing a silicone composition on the photovoltaic cell, and compressing the first outermost layer, the photovoltaic cell, and the second layer to form the photovoltaic cell module.

  13. Photovoltaic module parameters acquisition model

    Energy Technology Data Exchange (ETDEWEB)

    Cibira, Gabriel, E-mail: cibira@lm.uniza.sk; Koščová, Marcela, E-mail: mkoscova@lm.uniza.sk

    2014-09-01

    Highlights: • Photovoltaic five-parameter model is proposed using Matlab{sup ®} and Simulink. • The model acquisits input sparse data matrix from stigmatic measurement. • Computer simulations lead to continuous I–V and P–V characteristics. • Extrapolated I–V and P–V characteristics are in hand. • The model allows us to predict photovoltaics exploitation in different conditions. - Abstract: This paper presents basic procedures for photovoltaic (PV) module parameters acquisition using MATLAB and Simulink modelling. In first step, MATLAB and Simulink theoretical model are set to calculate I–V and P–V characteristics for PV module based on equivalent electrical circuit. Then, limited I–V data string is obtained from examined PV module using standard measurement equipment at standard irradiation and temperature conditions and stated into MATLAB data matrix as a reference model. Next, the theoretical model is optimized to keep-up with the reference model and to learn its basic parameters relations, over sparse data matrix. Finally, PV module parameters are deliverable for acquisition at different realistic irradiation, temperature conditions as well as series resistance. Besides of output power characteristics and efficiency calculation for PV module or system, proposed model validates computing statistical deviation compared to reference model.

  14. NEMS integrating module documentation report

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-14

    The National Energy Modeling System (NEMS) is a computer modeling system that produces a general equilibrium solution for energy supply and demand in the US energy markets. The model achieves a supply and demand balance in the end-use demand regions, defined as the nine Census Divisions, by solving for the prices of each energy type such that the quantities producers are willing to supply equal the quantities consumers wish to consume. The system reflects market economics, industry structure, and energy policies and regulations that influence market behavior. The NEMS Integrating Module is the central integrating component of a complex modeling system. As such, a thorough understanding of its role in the modeling process can only be achieved by placing it in the proper context with respect to the other modules. To that end, this document provides an overview of the complete NEMS model, and includes brief descriptions of the modules with which the Integrating Module interacts. The emphasis and focus, however, is on the structure and function of the Integrating Module of NEMS.

  15. Photovoltaic module parameters acquisition model

    International Nuclear Information System (INIS)

    Cibira, Gabriel; Koščová, Marcela

    2014-01-01

    Highlights: • Photovoltaic five-parameter model is proposed using Matlab ® and Simulink. • The model acquisits input sparse data matrix from stigmatic measurement. • Computer simulations lead to continuous I–V and P–V characteristics. • Extrapolated I–V and P–V characteristics are in hand. • The model allows us to predict photovoltaics exploitation in different conditions. - Abstract: This paper presents basic procedures for photovoltaic (PV) module parameters acquisition using MATLAB and Simulink modelling. In first step, MATLAB and Simulink theoretical model are set to calculate I–V and P–V characteristics for PV module based on equivalent electrical circuit. Then, limited I–V data string is obtained from examined PV module using standard measurement equipment at standard irradiation and temperature conditions and stated into MATLAB data matrix as a reference model. Next, the theoretical model is optimized to keep-up with the reference model and to learn its basic parameters relations, over sparse data matrix. Finally, PV module parameters are deliverable for acquisition at different realistic irradiation, temperature conditions as well as series resistance. Besides of output power characteristics and efficiency calculation for PV module or system, proposed model validates computing statistical deviation compared to reference model

  16. 24 mars 2016 - Le Président de la Confédération suisse, Monsieur Johann Schneider-Ammann signe le livre d'or avec la Directrice générale du CERN Fabiola Gianotti.

    CERN Multimedia

    Brice, Maximilien

    2016-01-01

    Le Président de la Confédération suisse, Monsieur Johann Schneider-Ammann signe le livre d'or avec la Directrice générale du CERN Fabiola Gianotti. De g. à d.: F. Eder, Délégué aux Relations avec les Etats-hôtes; F. Bordry, Directeur des accélérateurs et de la technologie; S. E. M. l'Ambassadeur Fasel, Représentant permanent de la Suisse auprès de l’Office des Nations Unies et des autres organisations internationales à Genève; M. Steinacher, Directeur des finances et des ressources humaines et P. Pardo, Conseiller, Mission permanente de la Suisse auprès de l’Office des Nations Unies et des autres organisations internationales à Genève.

  17. Command and Service Module Communications

    Science.gov (United States)

    Interbartolo, Michael

    2009-01-01

    This viewgraph presentation examines Command and Service Module (CSM) Communications. The communication system's capabilities are defined, including CSM-Earth, CSM-Lunar Module and CSM-Extravehicular crewman communications. An overview is provided for S-band communications, including data transmission and receiving rates, operating frequencies and major system components (pre-modulation processors, unified S-band electronics, S-band power amplifier and S-band antennas). Additionally, data transmission rates, operating frequencies and the capabilities of VHF communications are described. Major VHF components, including transmitters and receivers, and the VHF multiplexer and antennas are also highlighted. Finally, communications during pre-launch, ascent, in-flight and entry are discussed. Overall, the CSM communication system was rated highly by flight controllers and crew. The system was mostly autonomous for both crew and flight controllers and no major issues were encountered during flight.

  18. Progress of MICE RFCC Module

    Energy Technology Data Exchange (ETDEWEB)

    Li, D.; Bowring, D.; DeMello, A.; Gourlay, S.; Green, M.; Li, N.; Niinikoski, T.; Pan, H.; Prestemon, S.; Virostek, S.; Zisman, M.; Bross, A.; Carcagno, R.; Kashikhin, V.; Sylvester, C.; Chen, A. B.; Guo, Bin; Li, Liyi; Xu, Fengyu; Cao, Y.; Sun, S.; Wang, Li; Yin, Lixin; Luo, Tianhuan; Summers, Don; Smith, B.; Radovinsky, A.; Zhukovsky, A.; Kaplan, D.

    2012-05-20

    Recent progress on the design and fabrication of the RFCC (RF and superconducting Coupling Coil) module for the international MICE (Muon Ionization Cooling Experiment) are reported. The MICE ionization cooling channel has two RFCC modules, each having four 201- MHz normal conducting RF cavities surrounded by one superconducting coupling coil (solenoid) magnet. The magnet is designed to be cooled by three cryocoolers. Fabrication of the RF cavities is complete; preparation for the cavity electro-polishing, low power RF measurements, and tuning are in progress at Lawrence Berkeley National Laboratory (LBNL). Fabrication of the cold mass of the first coupling coil magnet has been completed in China and the cold mass arrived at LBNL in late 2011. Preparations for testing the cold mass are currently under way at Fermilab. Plans for the RFCC module assembly and integration are being developed and are described.

  19. Active combustion flow modulation valve

    Science.gov (United States)

    Hensel, John Peter; Black, Nathaniel; Thorton, Jimmy Dean; Vipperman, Jeffrey Stuart; Lambeth, David N; Clark, William W

    2013-09-24

    A flow modulation valve has a slidably translating hollow armature with at least one energizable coil wound around and fixably attached to the hollow armature. The energizable coil or coils are influenced by at least one permanent magnet surrounding the hollow armature and supported by an outer casing. Lorentz forces on the energizable coils which are translated to the hollow armature, increase or decrease the flow area to provide flow throttling action. The extent of hollow armature translation depends on the value of current supplied and the direction of translation depends on the direction of current flow. The compact nature of the flow modulation valve combined with the high forces afforded by the actuator design provide a flow modulation valve which is highly responsive to high-rate input control signals.

  20. Acoustic field modulation in regenerators

    Science.gov (United States)

    Hu, J. Y.; Wang, W.; Luo, E. C.; Chen, Y. Y.

    2016-12-01

    The regenerator is a key component that transfers energy between heat and work. The conversion efficiency is significantly influenced by the acoustic field in the regenerator. Much effort has been spent to quantitatively determine this influence, but few comprehensive experimental verifications have been performed because of difficulties in modulating and measuring the acoustic field. In this paper, a method requiring two compressors is introduced and theoretically investigated that achieves acoustic field modulation in the regenerator. One compressor outputs the acoustic power for the regenerator; the other acts as a phase shifter. A RC load dissipates the acoustic power out of both the regenerator and the latter compressor. The acoustic field can be modulated by adjusting the current in the two compressors and opening the RC load. The acoustic field is measured with pressure sensors instead of flow-field imaging equipment, thereby greatly simplifying the experiment.

  1. Unity connecting module in SSPF

    Science.gov (United States)

    1998-01-01

    In the Space Station Processing Facility, the Unity connecting module, part of the International Space Station, is shown with Pressurized Mating Adapters 1 (left) and 2 (right) attached. Unity is scheduled to undergo testing of the common berthing mechanism to which other space station elements will dock. Unity is the primary payload on mission STS-88, targeted to launch Dec. 3, 1998. Other testing includes the Pad Demonstration Test to verify the compatibility of the module with the Space Shuttle as well as the ability of the astronauts to send and receive commands to Unity from the flight deck of the orbiter. Unity is expected to be ready for installation into the payload canister on Oct. 25, and transported to Launch Pad 39-A on Oct. 27. The Unity will be mated to the Russian-built Zarya control module which should already be in orbit at that time.

  2. Solid-state membrane module

    Science.gov (United States)

    Gordon, John Howard [Salt Lake City, UT; Taylor, Dale M [Murray, UT

    2011-06-07

    Solid-state membrane modules comprising at least one membrane unit, where the membrane unit has a dense mixed conducting oxide layer, and at least one conduit or manifold wherein the conduit or manifold comprises a dense layer and at least one of a porous layer and a slotted layer contiguous with the dense layer. The solid-state membrane modules may be used to carry out a variety of processes including the separating of any ionizable component from a feedstream wherein such ionizable component is capable of being transported through a dense mixed conducting oxide layer of the membrane units making up the membrane modules. For ease of construction, the membrane units may be planar.

  3. Detector module for gas monitor

    International Nuclear Information System (INIS)

    1980-01-01

    The invention relates to radioactive source detector module for use in a gas monitor. It is adapted to contain the source and other detector components to allow sealed coupling of those components with other portions of the gas monitor. It is particularly concerned with the use of radioactive materials used as electron sources in gas monitors. The module is used to detect changes in electron flow caused by partial absorption of the electron capture gas flowing between two electrodes. The assembly includes a gas flow source, a gas receiver and an electronic assembly for receiving a signal from the detector. The radioactive source and electrodes are housed so that they are connected to the gas flow source so as to prevent accidental or undesired disconnection. It is designed so that the detector module may be removed or replaced into the gas monitor assemblies by untrained personnel so as to prevent exposure to the radioactive material. Full details are given. (U.K.)

  4. Interfacial reactions in thermoelectric modules

    KAUST Repository

    Wu, Hsin-jay

    2018-02-21

    Engineering transport properties of thermoelectric (TE) materials leads to incessantly breakthroughs in the zT values. Nevertheless, modular design holds a key factor to advance the TE technology. Herein, we discuss the structures of TE module and illustrate the inter-diffusions across the interface of constituent layers. For Bi2Te3-based module, soldering is the primary bonding method, giving rise to the investigations on the selections of solder, diffusion barrier layer and electrode. For mid-temperature PbTe-based TE module, hot-pressing or spark plasma sintering are alternative bonding approaches; the inter-diffusions between the diffusion barrier layer, electrode and TE substrate are addressed as well.

  5. Thermal management, systems and modules; Thermomanagement, Systeme und Module

    Energy Technology Data Exchange (ETDEWEB)

    Flik, M. [Behr GmbH und Co., Stuttgart (Germany)

    1999-11-01

    Up till now the individual systems for engine temperature control and air conditioning of the vehicle cabin have to a large extent been viewed independently of one another. With the progress of electronic control systems, however, Behr has adopted an integrative approach to managing all heat and substance flows outside of the engine. This perspective, which is known as thermal management, has significantly boosted the rate of innovation. In a short period of time, new and optimized modules and systems have allowed considerable improvements to be made in relation to passenger comfort and safety, the integration of subsystems and modules into the vehicle and environmental compatibility. This innovation drive, which also extends to the design of major modules, will continue to gain impetus in the future. (orig.) [German] Bisher wurden die verschiedenen Systeme zur Temperierung des Motors und zur Klimatisierung der Fahrzeugkabine weitgehend unabhaengig voneinander betrachtet. Mit dem Vordringen der elektronischen Regelung hat bei Behr jedoch eine gesamtheitliche Betrachtung aller Waerme- und Stoffstroeme ausserhalb des Motors eingesetzt. Diese Sichtweise, Thermomanagement genannt, hat eine erhebliche Innovationsdynamik ermoeglicht. Mit neuen und optimierten Modulen und Systemen konnten in kurzer Zeit betraechtliche Verbesserungen erzielt werden - bei Komfort und Sicherheit der Fahrzeuginsassen, bei der Integration der Subsysteme und Module ins Fahrzeug sowie bei seiner oekologischen Vertraeglichkeit. Diese Innovationsdynamik, die auch die Bildung von Grossmodulen einschliesst, wird in Zukunft noch zunehmen. (orig.)

  6. Static feed water electrolysis module

    Science.gov (United States)

    Powell, J. D.; Schubert, F. H.; Jensen, F. C.

    1974-01-01

    An advanced static feed water electrolysis module (SFWEM) and associated instrumentation for generating breathable O2 was developed. The system also generates a H2 byproduct for use in an air revitalization system for O2 recovery from metabolic CO2. Special attention was given to: (1) eliminating water feed compartment degassing, (2) eliminating need for zero gravity condenser/separators, (3) increasing current density capability, and (4) providing a self contained module so that operation is independent of laboratory instrumentation and complicated startup/shutdown procedures.

  7. DELPHI Barrel Muon Chamber Module

    CERN Multimedia

    1989-01-01

    The module was used as part of the muon identification system on the barrel of the DELPHI detector at LEP, and was in active use from 1989 to 2000. The module consists of 7 individual muons chambers arranged in 2 layers. Chambers in the upper layer are staggered by half a chamber width with respect to the lower layer. Each individual chamber is a drift chamber consisting of an anode wire, 47 microns in diameter, and a wrapped copper delay line. Each chamber provided 3 signal for each muon passing through the chamber, from which a 3D space-point could be reconstructed.

  8. Transparent solar cell window module

    Energy Technology Data Exchange (ETDEWEB)

    Chau, Joseph Lik Hang; Chen, Ruei-Tang; Hwang, Gan-Lin; Tsai, Ping-Yuan [Nanopowder and Thin Film Technology Center, ITRI South, Industrial Technology Research Institute, Tainan County 709 (China); Lin, Chien-Chu [I-Lai Acrylic Corporation, Tainan City (China)

    2010-03-15

    A transparent solar cell window module based on the integration of traditional silicon solar cells and organic-inorganic nanocomposite material was designed and fabricated. The transparent solar cell window module was composed of a nanocomposite light-guide plate and traditional silicon solar cells. The preparation of the nanocomposite light-guide plate is easy without modification of the traditional casting process, the nanoparticles sol can be added directly to the polymethyl methacrylate (PMMA) monomer syrup during the process. The solar energy collected by this window can be used to power up small household electrical appliances. (author)

  9. Nonlinear modulation of ionization waves

    International Nuclear Information System (INIS)

    Bekki, Naoaki

    1981-01-01

    In order to investigate the nonlinear characteristics of ionization waves (moving-striations) in the positive column of glow discharge, a nonlinear modulation of ionization waves in the region of the Pupp critical current is analysed by means of the reductive perturbation method. The modulation of ionization waves is described by a nonlinear Schroedinger type equation. The coefficients of the equation are evaluated using the data of the low pressure Argon-discharge, and the simple solutions (plane wave and envelope soliton type solutions) are presented. Under a certain condition an envelope soliton is propagated through the positive column. (author)

  10. Coherent states on Hilbert modules

    International Nuclear Information System (INIS)

    Ali, S Twareque; Bhattacharyya, T; Roy, S S

    2011-01-01

    We generalize the concept of coherent states, traditionally defined as special families of vectors on Hilbert spaces, to Hilbert modules. We show that Hilbert modules over C*-algebras are the natural settings for a generalization of coherent states defined on Hilbert spaces. We consider those Hilbert C*-modules which have a natural left action from another C*-algebra, say A. The coherent states are well defined in this case and they behave well with respect to the left action by A. Certain classical objects like the Cuntz algebra are related to specific examples of coherent states. Finally we show that coherent states on modules give rise to a completely positive definite kernel between two C*-algebras, in complete analogy to the Hilbert space situation. Related to this, there is a dilation result for positive operator-valued measures, in the sense of Naimark. A number of examples are worked out to illustrate the theory. Some possible physical applications are also mentioned.

  11. Adolescence Education: Physical Aspect, Module One; Social Aspects, Module Two; Sex Roles, Module Three; Sexually Transmitted Diseases, Module Four.

    Science.gov (United States)

    United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

    Adolescence Education is a family life education training program designed to assist young people in their physical, social, emotional, and moral development as they prepare for adulthood, marriage, parenthood, aging, and social relationships in the context of family and society. This package consists of four individually bound modules: (1)…

  12. WRAP module 1 treatment plan

    International Nuclear Information System (INIS)

    Mayancsik, B.A.

    1995-05-01

    This document provides the methodology to treat waste in the Waste Receiving and Processing Module 1 facility to meet the Resource Conservation and Recovery Act (RCRA) land disposal restrictions or the Waste Isolation and Pilot Plant waste acceptance criteria. This includes Low-Level Mixed Waste, Transuranic Waste, and Transuranic Mixed Waste

  13. The Knife Machine. Module 15.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This module on the knife machine, one in a series dealing with industrial sewing machines, their attachments, and operation, covers one topic: performing special operations on the knife machine (a single needle or multi-needle machine which sews and cuts at the same time). These components are provided: an introduction, directions, an objective,…

  14. The Blindstitch Machine. Module 11.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This module on the purpose and use of the blindstitch machine, one in a series on clothing construction for industrial sewing machine operators designed for student self-study, contains three sections. Each section includes the following parts: an introduction, directions, an objective, learning activities, student information, student self-check,…

  15. The Chainstitch Machine. Module 18.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This module on the chainstitch machine, one in a series dealing with industrial sewing machines, their attachments, and operation, covers one topic: performing special operations on the chainstitch machine. These components are provided: an introduction, directions, an objective, learning activities, student information, a student self-check, and…

  16. Radio frequency modulation made easy

    CERN Document Server

    Faruque, Saleh

    2017-01-01

    This book introduces Radio Frequency Modulation to a broad audience. The author blends theory and practice to bring readers up-to-date in key concepts, underlying principles and practical applications of wireless communications. The presentation is designed to be easily accessible, minimizing mathematics and maximizing visuals.

  17. Bidirectional reachability-based modules

    CSIR Research Space (South Africa)

    Nortje, R

    2011-07-01

    Full Text Available The authors introduce an algorithm for MinA extraction in EL based on bidirectional reachability. They obtain a significant reduction in the size of modules extracted at almost no additional cost to that of extracting standard reachability...

  18. Rights & Responsibilities. Personnel Management Module.

    Science.gov (United States)

    Barker, Gale; And Others

    This module on rights and responsibilities is intended to introduce the hospitality manager or supervisor to sound personnel management practices that comply with the law. The material is presented in a self-instructional format in seven sections. At the beginning of each section is a statement of the objectives that will be achieved as a result…

  19. Market Segmentation: An Instructional Module.

    Science.gov (United States)

    Wright, Peter H.

    A concept-based introduction to market segmentation is provided in this instructional module for undergraduate and graduate transportation-related courses. The material can be used in many disciplines including engineering, business, marketing, and technology. The concept of market segmentation is primarily a transportation planning technique by…

  20. Can Arousal Modulate Response Inhibition?

    Science.gov (United States)

    Weinbach, Noam; Kalanthroff, Eyal; Avnit, Amir; Henik, Avishai

    2015-01-01

    The goal of the present study was to examine if and how arousal can modulate response inhibition. Two competing hypotheses can be drawn from previous literature. One holds that alerting cues that elevate arousal should result in an impulsive response and therefore impair response inhibition. The other suggests that alerting enhances processing of…

  1. Apollo 11 Command Service Module

    Science.gov (United States)

    1969-01-01

    A close-up view of the Apollo 11 command service module ready to be mated with the spacecraft LEM adapter of the third stage. The towering 363-foot Saturn V was a multi-stage, multi-engine launch vehicle standing taller than the Statue of Liberty. Altogether, the Saturn V engines produced as much power as 85 Hoover Dams.

  2. Exercises in modules and rings

    CERN Document Server

    Lam, TY

    2009-01-01

    This volume offers a compendium of exercises of varying degree of difficulty in the theory of modules and rings. All exercises are solved in full detail. Each section begins with an introduction giving the general background and the theoretical basis for the problems that follow.

  3. The Buttonhole Machine. Module 13.

    Science.gov (United States)

    South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

    This module on the bottonhole machine, one in a series dealing with industrial sewing machines, their attachments, and operation, covers two topics: performing special operations on the buttonhole machine (parts and purpose) and performing special operations on the buttonhole machine (gauged buttonholes). For each topic these components are…

  4. Transportation Brokerage: An Instructional Module.

    Science.gov (United States)

    Hayden, Linda

    A concept-based introduction to transportation brokerage is provided in this instructional module for undergraduate and graduate transportation-related courses for disciplines such as engineering, business, marketing, and technology. The concept of transportation brokerage is defined as an assignment of the management of a specific element of a…

  5. Attention modulates visual size adaptation.

    Science.gov (United States)

    Kreutzer, Sylvia; Fink, Gereon R; Weidner, Ralph

    2015-01-01

    The current study determined in healthy subjects (n = 16) whether size adaptation occurs at early, i.e., preattentive, levels of processing or whether higher cognitive processes such as attention can modulate the illusion. To investigate this issue, bottom-up stimulation was kept constant across conditions by using a single adaptation display containing both small and large adapter stimuli. Subjects' attention was directed to either the large or small adapter stimulus by means of a luminance detection task. When attention was directed toward the small as compared to the large adapter, the perceived size of the subsequent target was significantly increased. Data suggest that different size adaptation effects can be induced by one and the same stimulus depending on the current allocation of attention. This indicates that size adaptation is subject to attentional modulation. These findings are in line with previous research showing that transient as well as sustained attention modulates visual features, such as contrast sensitivity and spatial frequency, and influences adaptation in other contexts, such as motion adaptation (Alais & Blake, 1999; Lankheet & Verstraten, 1995). Based on a recently suggested model (Pooresmaeili, Arrighi, Biagi, & Morrone, 2013), according to which perceptual adaptation is based on local excitation and inhibition in V1, we conclude that guiding attention can boost these local processes in one or the other direction by increasing the weight of the attended adapter. In sum, perceptual adaptation, although reflected in changes of neural activity at early levels (as shown in the aforementioned study), is nevertheless subject to higher-order modulation.

  6. Three dimensional conformal irradiation with intensity modulation by tomo-therapy at the skull base in three patients with a acrochordoma and a patient with a chondrosarcoma; Irradiation conformationnelle tridimensionnelle avec modulation d'intensite par tomotherapie de la base du crane chez 3 patients atteints d'un chordome et un patient atteint d'un chondrosarcome

    Energy Technology Data Exchange (ETDEWEB)

    Noel, G.; Meyer, P.; Niederst, C.; Antoni, D.; Karamanoukian, D. [Centre de lutte contre le cancer Paul-Strauss, 67 - Strasbourg (France); Froelich, S.; Boyer, P. [Hopital Universitaire de Hautepierre, 67 - Strasbourg (France); George, B. [Hopital Universitaire Lariboisiere, AP-HP, 75 - Paris (France)

    2009-10-15

    The tomo-therapy of acrochordomas and chondrosarcomas of the skull base is possible. The dose distribution is satisfying the tolerance is acceptable. A dosimetry comparison with protons is being. (N.C.)

  7. Preliminary results of the assessment of intensity modulated radiotherapy (IMRT) for prostatic and head and neck tumors (STIC 2001); Resultats preliminaires de l'evaluation de la radiotherapie conformationnelle avec modulation d'intensite (RCMI) pour le traitement des cancers prostatiques et ORL (STIC 2001)

    Energy Technology Data Exchange (ETDEWEB)

    Marchal, C.; Lapeyre, M.; Beckendorf, V.; Aletti, P.; Marchesi, V. [Centre Alexis-Vautrin, Dept. de Radiotherapie, 54 - Vandoeuvre-les-Nancy (France); Hasle, E.; Carrere, M.O. [Centre de Lutte Contre le Cancer Leon-Berard, GRESAC, UMR 5823 du CNRS, 69 - Lyon (France); Dubois, J.B.; Ailleres, N. [Centre Regional de Lutte Contre le Cancer Paul Lamarque, Service de Radiotherapie, 34 - Montpellier (France); Maigon, P.; Naudy, S. [Centre de Lutte Contre le Cancer Georges-Francois-Leclerc, Service de Radiotherapie, 21 - Dijon (France); Bensadoun, R.J.; Marcie, S.; Gerard, J.P. [Centre Antoine-Lacassagne, Service de Radiotherapie, 06 - Nice (France); Le Prise, E.; Manens, J.P. [Centre Eugene-Marquis, Service de Radiotherapie, 35 - Rennes (France); Lartigau, E.; Mazurier, J. [Centre de Lutte Contre le Cancer Oscar-Lambret, Service de Radiotherapie, 59 - Lille (France); Carrie, C.; Ginestet, C.; Pommier, P. [Centre de Lutte Contre le Cancer Leon-Berard, Service de Radiotherapie, 69 - Lyon (France); Dubray, B.; Chauvin, F. [Centre de Lutte Contre le Cancer Leon-Berard, Dept. de Sante Publique, 69 - Lyon (France)

    2004-11-01

    Introduction. - Between May 2002 and May 2004, eight French comprehensive cancer centres did a prospective non-randomized study including 200 patients, 100 with cancer of the prostate and 100 with head and neck cancers. Half of each patient group was treated by IMRT and the others by RTC 3D. This clinical study was associated with an economic study and a physics study. We report here the first results. Patients and methods. - For the clinical study, the analysis of the data of the first 88 patients irradiated for a prostatic cancer shows that 39 received RTC and 49 IMRT with a mean dose of 78 Gy at the ICRU point at 2 Gy per fraction. For H and N tumours, the preliminary analysis was done on the 87 first patients with a mean follow-up of 11.5 months (2 to 25 months) and a median of 8.4 months for the IMRT groups and 13,2 months for the RTC group. The economic study was done on the first 157 patients included during the first 18 months: 71 treated by RTC (35 for H and N and 36 for prostate) and 86 treated by IMRT (38 for H and N and 48 for prostate). The assessment of the direct costs was realized y a micro-costing technique. The physical study compared dose distributions for both techniques and has created quality control recommendations. Results. - Clinical studies of the acute reactions do not show any difference between groups, but we want to point out the short follow-up and the relatively high dose delivered to cancers of the prostate. The physics study demonstrates that IMRT is technically feasible in good clinical conditions with high quality assurance, a good reproducibility and precision. Dosimetric data show that IMRT could certainly spare organs at risk more than RTC for H and N tumours. The direct costs of 'routine' treatments for H and N tumours were 4922 euros for IMRT versus 1899 euros for RTC and for the prostatic cancers 4911 euros for IMRT versus 2357 for RTC. (authors)

  8. Perl Modules for Constructing Iterators

    Science.gov (United States)

    Tilmes, Curt

    2009-01-01

    The Iterator Perl Module provides a general-purpose framework for constructing iterator objects within Perl, and a standard API for interacting with those objects. Iterators are an object-oriented design pattern where a description of a series of values is used in a constructor. Subsequent queries can request values in that series. These Perl modules build on the standard Iterator framework and provide iterators for some other types of values. Iterator::DateTime constructs iterators from DateTime objects or Date::Parse descriptions and ICal/RFC 2445 style re-currence descriptions. It supports a variety of input parameters, including a start to the sequence, an end to the sequence, an Ical/RFC 2445 recurrence describing the frequency of the values in the series, and a format description that can refine the presentation manner of the DateTime. Iterator::String constructs iterators from string representations. This module is useful in contexts where the API consists of supplying a string and getting back an iterator where the specific iteration desired is opaque to the caller. It is of particular value to the Iterator::Hash module which provides nested iterations. Iterator::Hash constructs iterators from Perl hashes that can include multiple iterators. The constructed iterators will return all the permutations of the iterations of the hash by nested iteration of embedded iterators. A hash simply includes a set of keys mapped to values. It is a very common data structure used throughout Perl programming. The Iterator:: Hash module allows a hash to include strings defining iterators (parsed and dispatched with Iterator::String) that are used to construct an overall series of hash values.

  9. Reliability and Energy Output of Bifacial Modules

    Energy Technology Data Exchange (ETDEWEB)

    Van Aken, B.B.; Jansen, M.J.; Dekker, N.J.J. [ECN Solar Energy, Petten (Netherlands)

    2013-06-15

    Although flash tests under standard test conditions yields lower power due to transmittance of the back sheet, bifacial modules are expected to outperform their monofacial equivalents in terms of yearly energy output in the field. We compare flash tests for bifacial modules with and without a light scattering panel directly behind the modules: 3% more power output is obtained. We also report on the damp-heat reliability of modules with transparent back sheet. Finally we will present the results of an outdoor study comparing modules with transparent back sheet and modules with state-of-the-art AR coating on the front glass.

  10. State Constrained Optimal Control Applied to Supervisory Control in HEVs Commande optimale avec restrictions d’états appliquée à la supervision de l’énergie de véhicules hybrides

    Directory of Open Access Journals (Sweden)

    Pérez L.V.

    2010-02-01

    Full Text Available The optimization of the supervisory control of hybrid electric vehicles over predetermined driving cycles has been used as a previous study for determining on-line strategies and also for design and sizing purposes. This problem may be posed as an optimal control problem, in which the energy in the bank of batteries is often the state variable, and the power from any of the system sources is, the control action. As both of these quantities are bounded, the optimal control problem has control constraints or state constraints or both. Usually, the charge-sustaining mode of operation is ensured just by imposing a transversality condition, i.e. a fixed final energy, or including an additional term in the cost functional that penalizes the moving away of the state variable from the nominal value. We considered the problem where the state is allowed to move freely within a band. This led to an optimal control problem with control and state constraints. In this work we describe the difficulties that arise while solving the equations given by the Pontryagin’s Maximum Principle and how these difficulties can be overcome by using the so-called Direct Transcription approach that consists of a programming tool to solve the resultant large-scale finite dimensional optimization problem. L’optimisation de la commande au niveau superviseur de véhicules hybrides sur cycles d’usage prédéterminés a été utilisée comme une première étude pour déterminer des stratégies en ligne mais aussi avec des objectifs de conception et dimensionnement. Ce problème peut être posé comme un problème de commande optimale, où l’énergie dans les batteries est généralement la variable d’état et où la puissance de n’importe quelle source du système est l’action de commande. Comme ces deux quantités sont bornées, le problème de commande optimale a des restrictions sur la fonction de commande et sur l’état. Généralement, le fonctionnement

  11. Prévision de la corrosion des coussinets et corrélation avec l'essai sur moteur Petter W1 L Predicting Bearing Wear and Correlation with the Petter W1 L Engine Test

    Directory of Open Access Journals (Sweden)

    Desvard A.

    2006-11-01

    Full Text Available Parmi les essais exigés par les spécifications européennes et américaines pour huiles de moteurs, il existe un essai de résistance à la corrosion des coussinets de bielles en cuivre-plomb (tableau 1. Ces essais sont effectués sur moteurs monocylindre Petter W1 L ou Labeco CLR (tableau 2. Des résultats de corrosion obtenus sur le moteur Petter W1 L, avec des huiles de calibrage, sont donnés (tableau 4 et les courbes de corrosion en fonction du temps d'essai sont représentées figure 1. En utilisant ces mêmes huiles, un groupe de travail du GFC*, chargé de développer des méthodes d'essai laboratoire de présélection, a mis au point un test basé sur le suivi de la corrosion d'une éprouvette de plomb, en présence de cuivre, immergée dans le lubrifiant à évaluer, lorsque celui-ci est soumis à des conditions d'oxydation sévères, en présence d'air, à haute température (fig. 2. Les résultats obtenus sont en parfaite concordance avec les résultats sur moteurs (tableau 5 et fig. 3. Par ailleurs, ces essais mettent en évidence une excellente répétabilité (fig. 4,et une excellente reproductibilité (fig. 5 et 6 de la méthode de laboratoire. * GFC : Groupement Français de Coordination, pour le développement des essais de performance des combustibles, des lubrifiants pour moteurs et autres fluides utilisés dans les transports. Among the tests required by European and American specifications for motor oils, there is a test of the corrosion resistance of copper-lead bearings (Table 1. These tests are performed in single-cylinder Petter W1 L engines or Labeco CLR engines (Table 2. The corrosion results obtained with the Petter W1 L engine, for calibration oils, are given (Table 4, and the corrosion curves as a function of time are shown in Fig. 1. By using the same oils, a GFC working group responsible for developing laboratory preselection test methods has developed a test based on the determining of the corrosion of a lead

  12. Three-dimensional histological imaging of primate brain and correlation with in vivo medical device images Imagerie histologique tri-dimensionnelle du cerveau de primate et corrélation avec l'imagerie médicale in vivo

    Directory of Open Access Journals (Sweden)

    Julien Dauguet

    2011-02-01

    Full Text Available The 3D reconstruction of series of histological slices is an imaging technique that appeared about 25 years ago but that is only starting now to become recognized as an imaging modality per se. Thanks to this technique, it becomes possible to restore the spatial consistency of the brain and to match accurately histological slices with an in vivo medical device image such as an MRI or a PET scan. This is of high interest since it allows direct comparison between the histology, often considered as the gold standard in terms of information, and the same medical devices used in clinical routine to image human patients. Thanks to the similarity of their brain with humans and the disease models widely developed for them, non-human primates are privileged species to benefit from this possibility of 3D analysis and in vivo - post mortem correlation. We present in this article a state of the art review of the main techniques proposed to achieve this original imaging technique, followed by a set of some particularly promising neuroimaging applications.La reconstruction 3D de séries de coupes histologiques est une technique d'imagerie qui est apparue il y a 25 ans environ mais qui commence seulement à être reconnue comme une modalité d'imagerie à part entière. Grâce à cette technique, la cohérence 3D du cerveau est rétablie et il devient notamment possible de mettre en correspondance précisément des coupes histologiques avec un examen issu d'un imageur médical comme une IRM ou une TEP. C'est d'un intérêt majeur car cela permet une comparaison directe entre l'histologie, souvent considérée comme la référence étalon en termes d'information fournie, et les mêmes imageurs médicaux que ceux utilisés en routine clinique pour suivre les patients humains. Grâce à leur similarité avec les humains et aux nombreux modèles animaux de maladies développés pour eux, les primates non-humains sont une espèce privilégiée pour bénéficier de

  13. A contribution to the study of the mixed uranium-plutonium mono-carbides containing small quantities of zirconium; Contribution a l'etude du monocarbure d'uranium et de plutonium avec de faibles additions de zirconium

    Energy Technology Data Exchange (ETDEWEB)

    Bocker, S. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1970-03-01

    We have studied a mixed monocarbide, type (U,Pu)C, containing small additions of zirconium for the application as a fast neutron reactor fuel. A preliminary study was conducted on the (U,Zr)C monocarbide (Report CEA-R-3765(1). It was found that small additions of zirconium to the uranium-plutonium monocarbide improve a number of properties such as atmospheric corrosion, the hardness, and particularly the compatibility with 316 stainless steel. However, properties such as the coefficient of expansion and the melting point are only slightly changed. The relative percentage of Pu/U+Pu in the monocarbide was fixed at 20 per cent. Two processes of fabrication were employed: casting in an arc furnace, sintering, carried out after having the hydrides of the metals carburized. The metallurgical results indicate, that the above mentioned fuel might be of interest for fast neutron reactor application. (author) [French] On a etudie un combustible de type carbure (U,Pu)C pour les reacteurs a neutrons rapides. Les recherches preliminaires ont porte sur le carbure (UZr)C (rapport CEA-R-3765(1)). L'addition de faibles quantites de zirconium (3 at. pour cent) au monocarbure (U,Pu)C, ameliore certaines proprietes, commee la tenue a la corrosion atmospherique, la durete et surtout la compatibilite avec l'acier inoxydable X-18 M, Par contre le coefficient de dilatation et la densite sont peu changes. Le rapport Pu/Pu+U etait fixe a 20 pour cent. Deux procedes de fabrication ont ete etudies: l'un par fusion a l'arc, l'autre par frittage a partir de metaux hydrures. Au vu des resultats metallurgiques obtenus le carbure (U,Pu,Zr)C semble presenter un interet certain. (auteur)

  14. Construire une conception scientifique du vivant avec des élèves de 5-7 ans : approche didactique pour mieux comprendre les processus d’apprentissage et les enjeux développementaux

    Directory of Open Access Journals (Sweden)

    Grancher Céline

    2015-01-01

    Full Text Available Cet article s’intéresse au vivant en tant qu’objet de savoir et aux phénomènes d’enseignement-apprentissage de ce concept au début de l’école primaire en France (élèves de 5-7 ans, classes de CP-CE1. Nous nous interrogeons sur les contenus à enseigner et les situations possibles à mettre en oeuvre dans les classes pour que des élèves construisent une conception scientifique du vivant. Nous délimitons d’abord le concept de vivant dans une perspective d’enseignement à de jeunes élèves. Puis nous identifions un des enjeux de l’enseignement-apprentissage du vivant : permettre aux élèves de construire un autre rapport au vivant que celui de la vie de tous les jours. Nous abordons les situations scolaires comme des processus d’acculturation scientifique scolaire. Les élèves sont en effet incités à entrer dans une culture scientifique en s’appropriant à la fois des savoirs relatifs au vivant et des pratiques de la biologie. À partir de deux séquences d’enseignement réalisées en CP puis en CE1 avec les mêmes élèves, nous repérons des indicateurs qui témoignent de la construction d’une conception scientifique du vivant par les élèves. Nous montrons également que les processus d’acculturation scientifique dans lesquels les élèves sont engagés ont des effets sur leur développement.

  15. The choice of sites considered with respect to problems of radioactive waste disposal; Le choix des sites considere dans ses rapports avec les problemes de rejets d'effluents radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Duhamel, F [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The author of this article shows clearly that a knowledge of the behaviour of wastes together with an analysis of the risks of accidents makes it possible to define the general characteristics of a site as a function of, on the one hand the geological and meteorological factors, and on the other, the proposed installations. Consideration of the biological environment makes it possible to clarify the sitological study and to make a choice between the several sites possible. The author shows the real necessity for radio-protection specialists to share their knowledge, to establish regulations, and to cooperate with the authors responsible for the installations, from the moment of the choice of the site and of the planning of the apparatus up to the final reject of the waste. (author) [French] L'auteur de ce rapport montre clairement que la connaissance du comportement des effluents jointe a l'analyse des risques d'accident permettent de degager les caracteristiques generales d'un site en fonction d'une part, des donnees geologiques et meteorologiques, d'autre part des installations projetees. La consideration du milieu biologique permet de preciser l'etude sitologique et d'effectuer un choix entre plusieurs sites donnes. L'auteur met en evidence la necessite absolue pour les specialistes de la radioprotection d'echanger leurs connaissances, d'etablir des reglements et de cooperer avec les autorites responsables des installations depuis le choix des sites et le projet des appareillages jusqu'au rejet ultime des residus. (auteur)

  16. Variation of the material laplacian of G1 with the radius of the uranium bar; Variation du laplacien matiere de G1 avec le rayon du barreau d'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Tanguy, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    In this report are described and interpreted some experiments, carried out in the pile G1 during a period of shut-down, which have made it possible to measure the variation of the material Laplacian of the lattice with the radius of the uranium bar. The variation of the reactivity of the pile is measured when an increasing number of fuel elements are progressively replaced in the central region by fuel elements of greater diameter; it is shown that, starting from measurements based on less than ten per cent of the total number of elements, the variation of reactivity corresponding to the replacement of all the elements can be determined; it is then easy to deduce the variations of the Laplacian. Results: the variations of the Laplacian with the uranium rod diameter are 0 (d. 26 mm), +0.065 {+-} 0.004 m{sup -2} (d. 28 mm) and +0.080 {+-} 0.008 m{sup -2} (d. 32 mm). (author) [French] Dans ce rapport sont decrites et interpretees des experiences realisees sur la pile G1 'froide', experiences qui ont permis de mesurer la variation du Laplacien matiere du reseau avec le rayon du barreau d'uranium. On mesure la variation de reactivite de la pile lorsqu'on remplace progressivement dans la region centrale un nombre croissant de cartouches par des cartouches de plus gros diametre; on montre qu'a partir de mesures portant sur moins de dix pour cent du nombre total de cartouches, on peut determiner la variation de reactivite qui correspondrait au remplacement de toutes les cartouches; il est facile d'en deduire les variations du Laplacien. Resultats: les variations du Laplacien en fonction du diametre du barreau d'uranium sont: 0 (d. 26 mm), +0.065 {+-} 0.004 m{sup -2} (d. 28 mm) and +0.080 {+-} 0.008 m{sup -2} (d. 32 mm). (auteur)

  17. Augmenter l’accessibilité et la qualité des services de santé de première ligne avec les Groupes de médecine de famille

    Directory of Open Access Journals (Sweden)

    Émélie L. Aubin

    2016-04-01

    Full Text Available Pour faire suite aux recommandations de la Commission Clair en 2000, les premiers groupes de médecine de famille (GMF ont été implantés au Québec en 2002. Cette réforme avait pour but d'améliorer l’accès et la qualité des services de première ligne, reconnus comme déficients. Afin d’y parvenir, les GMF devaient établir une pratique interprofessionnelle et multidisciplinaire offrant des heures et jours de services étendus, notamment grâce au partage des patients par un groupe de médecins qui collaborent avec des adjoints administratifs, du personnel infirmier et autres professionnels de la santé, en plus de l’informatisation des dossiers électroniques de patients. Cette réforme rencontrait l'assentiment de nombreux acteurs (médecins, personnel infirmier, population générale qui anticipaient tous en bénéficier à divers égards. Cependant, la mise en œuvre précipitée de cette réforme a causé beaucoup de confusion et requis de nombreux rajustements, dont certains sont encore à venir. De fait, à ce jour, la réforme a eu moins d'impacts qu’anticipés, le nombre de patients inscrits aux GMF ayant à peine augmenté et l’informatisation tardant à se faire. Enfin, bien que les patients inscrits en GMF perçoivent une plus grande continuité des soins dans le cadre de cette pratique interprofessionnelle, ils ne perçoivent cependant pas d’amélioration en ce qui concerne l’accès aux soins.

  18. SIMULATION ET MODELISATION DE LA VARIATION DE LA MOBILITE DE HALL DES PHOTOELECTRONS EN FONCTION DE LA TEMPERATURE DANS LES CRISTAUX DE n-ZnSe :Zn IRRADIES AVEC DES ELECTRONS ENERGETIQUES

    Directory of Open Access Journals (Sweden)

    D DJOUADI

    2007-12-01

    Full Text Available Dans l’intervalle de températures [77..300 K] a été mesurée la mobilité de Hall des électrons d’équilibre et des photoélectrons dans les cristaux de n-ZnSe :Zn irradiés avec un faisceau d’électrons d’énergie E=1,3 MeV et dont la dose d’irradiation varie entre 2,73 1016 et 5.19 1017 électrons/cm2 . Le comportement de la mobilité des photoélectrons s’explique parfaitement dans le cadre d’un modèle à deux-barrières d’un semi-conducteur inhomogène représentant une matrice faiblement ohmique contenant des inclusions fortement ohmiques (clusters. En se basant sur les théories de Shik et de Petrossiyan , une expression approximative de la mobilité de Hall a été obtenue. Il a été montré que ce modèle fonctionne parfaitement pour les petites doses d’irradiation. Lorsque la dose dépasse une certaine valeur critique ( D= 2.98 1017 électrons /cm2 le modèle considéré passe au modèle du potentiel à relief aléatoire.

  19. Getting to Grips with the Gospels: Interpretation and Elaboration in Marie Corelli’s Barabbas (1893 Marie Corelli aux prises avec les Évangiles dans Barabbas (1893

    Directory of Open Access Journals (Sweden)

    Elizabeth White

    2009-10-01

    Full Text Available Dans Barabbas (1893, Marie Corelli entreprit de réécrire le récit évangélique de la crucifixion du Christ et de sa résurrection. Ce faisant, elle s’appuya fortement sur le texte du Nouveau Testament, mais s’éloigna aussi de manière significative de cette source. Tout en insistant sur l’importance de la Bible, Corelli remet clairement en question son autorité, et ce, à plusieurs endroits dans le roman. En semant le doute sur la véracité des récits des Évangiles, elle se montre en accord avec certains arguments de la critique biblique. Tout au long du roman, Corelli semble partagée entre une certaine révérence à l’égard de l’histoire biblique et la volonté de tirer parti de la critique biblique, qui offrait notamment la possibilité de considérer certaines parties de la Bible comme des mythes. Dans cet article, j’entends, à partir d’une lecture précise du texte, examiner la thèse que défendit Corelli, à savoir que le Nouveau Testament était son seul matériau source et montrer dans quelle mesure elle s’éloigne des textes évangéliques tout en mettant en lumière les raisons possibles de cet éloignement.

  20. The compatibility of chromium-aluminium steels with high pressure carbon dioxid at intermediate- temperatures; Compatibilite des aciers au chrome-aluminium avec le gaz carbonique sous pression aux temperatures moyennes

    Energy Technology Data Exchange (ETDEWEB)

    Leclercq, D; Loriers, H; David, R; Darras, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    With a view to their use in the exchangers of nuclear reactors of the graphite-gas or heavy water-gas types, the behaviour of chromium-aluminium steels containing up to 7 per cent chromium and 1.5 per cent aluminium has been studied in the presence of high-pressure carbon dioxide at temperatures of between 400 and 700 deg. C. The two most interesting grades of steel (2 per cent Cr - 0.35 per cent Al - 0.35 per cent Mo and 7 per cent Cr - 1.5 per cent Al - 0.6 per cent Si) are still compatible with carbon dioxide up to 550 and 600 deg. C respectively. A hot dip aluminised coating considerably increases resistance to oxidation of the first grade and should make possible its use up to temperatures of at least 600 deg. C. (authors) [French] Dans l'optique de leur emploi dans les echangeurs de reacteurs nucleaires des filieres graphite-gaz ou eau lourde-gaz, le comportement en presence de gaz carbonique sous pression d'aciers au chrome-aluminium, contenant jusqu'a 7 pour cent de chrome et 1,5 pour cent d'aluminium a ete etudie entre 400 et 700 deg. C. Les deux nuances les plus interessantes (2 pour cent Cr - 0,35 pour cent Al - 0,35 pour cent Mo et 7 pour cent Cr - 1,5 pour cent Al - 0,6 pour cent Si) restent compatibles avec le gaz carbonique jusqu'a 550 et 600 deg. C respectivement. Un revetement d'aluminium, effectue par immersion dans un bain fondu, ameliore notablement la resistance a l'oxydation de la premiere et doit permettre son empioi jusqu'a 600 deg. C au moins. (auteurs)

  1. A contribution to the study of the mixed uranium-plutonium mono-carbides containing small quantities of zirconium; Contribution a l'etude du monocarbure d'uranium et de plutonium avec de faibles additions de zirconium

    Energy Technology Data Exchange (ETDEWEB)

    Bocker, S [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1970-03-01

    We have studied a mixed monocarbide, type (U,Pu)C, containing small additions of zirconium for the application as a fast neutron reactor fuel. A preliminary study was conducted on the (U,Zr)C monocarbide (Report CEA-R-3765(1). It was found that small additions of zirconium to the uranium-plutonium monocarbide improve a number of properties such as atmospheric corrosion, the hardness, and particularly the compatibility with 316 stainless steel. However, properties such as the coefficient of expansion and the melting point are only slightly changed. The relative percentage of Pu/U+Pu in the monocarbide was fixed at 20 per cent. Two processes of fabrication were employed: casting in an arc furnace, sintering, carried out after having the hydrides of the metals carburized. The metallurgical results indicate, that the above mentioned fuel might be of interest for fast neutron reactor application. (author) [French] On a etudie un combustible de type carbure (U,Pu)C pour les reacteurs a neutrons rapides. Les recherches preliminaires ont porte sur le carbure (UZr)C (rapport CEA-R-3765(1)). L'addition de faibles quantites de zirconium (3 at. pour cent) au monocarbure (U,Pu)C, ameliore certaines proprietes, commee la tenue a la corrosion atmospherique, la durete et surtout la compatibilite avec l'acier inoxydable X-18 M, Par contre le coefficient de dilatation et la densite sont peu changes. Le rapport Pu/Pu+U etait fixe a 20 pour cent. Deux procedes de fabrication ont ete etudies: l'un par fusion a l'arc, l'autre par frittage a partir de metaux hydrures. Au vu des resultats metallurgiques obtenus le carbure (U,Pu,Zr)C semble presenter un interet certain. (auteur)

  2. Spring-cleaning at the solar module; Fruehjahrsputz am Modul

    Energy Technology Data Exchange (ETDEWEB)

    Orben, Steffen [Orben Wasseraufbereitung, Wiesbaden (Germany)

    2013-04-15

    The solar power yield of a photovoltaic power plant can be reduced significantly by a natural pollution. The average loss in performance and yield at mild and moderate surface contaminations is between eight and sixteen percent. The self-cleaning effect due to wind, rain and snow is not sufficient in order to purify the solar panels. In contrast, the purification with desalinated water receives the performance of solar generators and ensures the yields. Desalinated water can be produced from tap water by reverse osmosis and ion exchange. The water consumption amounts ten liters for a performance of one kilowatt of the solar module. Other important factors are 0.23 Euro for a filter cartridge as well as 11.50 Euro for personnel costs for a performance of one kilowatt of the solar module.

  3. Structural modules in AP1000 plant design

    International Nuclear Information System (INIS)

    Prasad, N.; Tunon-Sanjur, L.

    2007-01-01

    Structural modules are extensively used in AP1000 plant design. The shop manufacturing of modules components improves the quality and reliability of plant structures. The application of modules has a positive impact on construction schedules, and results in substantial savings in the construction cost. This paper describes various types of structural modules used for AP1000 plant structures. CA structural wall modules are steel plate modules with concrete placed, on or within the module, after module installation. The layout and design of the largest CA wall modules, CA01 and CA20, is described in detail. General discussion of structural floor modules, such as the composite and finned floors, is also included. Steel form CB modules (liners) consist of plate reinforced with angle stiffeners and tee sections. The angles and the tee sections are on the concrete side of the plate. Design of CB20 has been included as an example of CB type modules. Design codes and structural concepts related to module designs are discussed. (authors)

  4. Earth System Science Education Modules

    Science.gov (United States)

    Hall, C.; Kaufman, C.; Humphreys, R. R.; Colgan, M. W.

    2009-12-01

    The College of Charleston is developing several new geoscience-based education modules for integration into the Earth System Science Education Alliance (ESSEA). These three new modules provide opportunities for science and pre-service education students to participate in inquiry-based, data-driven experiences. The three new modules will be discussed in this session. Coastal Crisis is a module that analyzes rapidly changing coastlines and uses technology - remotely sensed data and geographic information systems (GIS) to delineate, understand and monitor changes in coastal environments. The beaches near Charleston, SC are undergoing erosion and therefore are used as examples of rapidly changing coastlines. Students will use real data from NASA, NOAA and other federal agencies in the classroom to study coastal change. Through this case study, learners will acquire remotely sensed images and GIS data sets from online sources, utilize those data sets within Google Earth or other visualization programs, and understand what the data is telling them. Analyzing the data will allow learners to contemplate and make predictions on the impact associated with changing environmental conditions, within the context of a coastal setting. To Drill or Not To Drill is a multidisciplinary problem based module to increase students’ knowledge of problems associated with nonrenewable resource extraction. The controversial topic of drilling in the Arctic National Wildlife Refuge (ANWR) examines whether the economic benefit of the oil extracted from ANWR is worth the social cost of the environmental damage that such extraction may inflict. By attempting to answer this question, learners must balance the interests of preservation with the economic need for oil. The learners are exposed to the difficulties associated with a real world problem that requires trade-off between environmental trust and economic well-being. The Citizen Science module challenges students to translate scientific

  5. Module-Amenability on Module Extension Banach Algebras

    Directory of Open Access Journals (Sweden)

    Davood Ebrahimi Bagha

    2014-05-01

    Full Text Available Let $A$ be a Banach algebra and $E$ be a Banach‎ ‎$A$-bimodule then $S=A\\oplus E$‎, ‎the $l^1$-direct sum of $A$ and $E$‎ ‎becomes a module extension Banach algebra when equipped with the‎ ‎algebras product $ (a‎ , ‎x‎. ‎(a'‎, ‎x' = (aa'‎ , ‎a.x'‎ + ‎x.a'$‎. ‎In this‎ ‎paper‎, ‎we investigate $\\triangle$-amenability for these Banach‎ ‎algebras and we show that for discrete inverse semigroup $S$ with‎ ‎the set of idempotents $E_{S}$‎, ‎the module extension Banach algebra $S=l^{1} (E_{S} \\op l^{1} (S$ is $ \\tr$-amenable‎ ‎as a $l^{1}(E_{S} $-module if and only if $l^{1}(E_{S}$ is amenable as Banach algebra‎.

  6. Index modulation for 5G wireless communications

    CERN Document Server

    Wen, Miaowen; Yang, Liuqing

    2017-01-01

    This book presents a thorough examination of index modulation, an emerging 5G modulation technique. It includes representative transmitter and receiver design, optimization, and performance analysis of index modulation in various domains. First, the basic spatial modulation system for the spatial domain is introduced. Then, the development of a generalized pre-coding aided quadrature spatial modulation system as well as a virtual spatial modulation system are presented. For the space-time domain, a range of differential spatial modulation systems are examined, along with the pre-coding design. Both basic and enhanced index modulated OFDM systems for the frequency domain are discussed, focusing on the verification of their strong capabilities in inter-carrier interference mitigation. Finally, key open problems are highlighted and future research directions are considered. Designed for researchers and professionals, this book is essential for anyone working in communications networking, 5G, and system design. A...

  7. Mounting support for a photovoltaic module

    Science.gov (United States)

    Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

    2013-03-26

    A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

  8. PV module mounting method and mounting assembly

    Science.gov (United States)

    Lenox, Carl J.S.; Johnson, Kurt M.

    2013-04-23

    A method for mounting PV modules to a deck includes selecting PV module layout pattern so that adjacent PV module edges are spaced apart. PV mounting and support assemblies are secured to the deck according to the layout pattern using fasteners extending into the deck. The PV modules are placed on the PV mounting and support assemblies. Retaining elements are located over and secured against the upper peripheral edge surfaces of the PV modules so to secure them to the deck with the peripheral edges of the PV modules spaced apart from the deck. In some examples a PV module mounting assembly, for use on a shingled deck, comprises flashing, a base mountable on the flashing, a deck-penetrating fastener engageable with the base and securable to the deck so to secure the flashing and the base to the shingled deck, and PV module mounting hardware securable to the base.

  9. Liquid crystal television spatial light modulators

    Science.gov (United States)

    Liu, Hua-Kuang; Chao, Tien-Hsin

    1989-01-01

    The spatial light modulation characteristics and capabilities of the liquid crystal television (LCTV) spatial light modulators (SLMs) are discussed. A comparison of Radio Shack, Epson, and Citizen LCTV SLMs is made.

  10. Photoacoustic investigation of QCL modulation techniques

    International Nuclear Information System (INIS)

    Germer, M; Wolff, M

    2010-01-01

    High detection sensitivity and spectral selectivity is important for gas analysers to identify the measured compound and to detect low concentrations. We investigated three different modulation methods - pulse gate modulation, pulse frequency modulation and chopper modulation - for a new pulsed quantum cascade laser based photoacoustic sensor. The spectral selectivity and the detection limit for the three modulation methods are compared by measuring nitric oxide absorption lines and different concentrations. The highest detection sensitivity of 70 ppb was achieved with pulse gate modulation but at the lowest spectral resolution. The highest spectral resolution was achieved with chopper modulation but at the lowest detection sensitivity. It is demonstrated that for the three modulation methods a compromise has to be made between selectivity and sensitivity for each measuring task.

  11. Laser frequency modulation with electron plasma

    Science.gov (United States)

    Burgess, T. J.; Latorre, V. R.

    1972-01-01

    When laser beam passes through electron plasma its frequency shifts by amount proportional to plasma density. This density varies with modulating signal resulting in corresponding modulation of laser beam frequency. Necessary apparatus is relatively inexpensive since crystals are not required.

  12. Last LEP superconducting module travels to surface

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    The last superconducting module is raised from the Large Electron-Positron (LEP) collider tunnel, through the main shaft, to the surface. Superconducting modules were only used in the LEP-2 phase of the accelerator, from 1996 to 2000.

  13. Pulse shaping using a spatial light modulator

    CSIR Research Space (South Africa)

    Botha, N

    2009-07-01

    Full Text Available Femtosecond pulse shaping can be done by different kinds of pulse shapers, such as liquid crystal spatial light modulators (LC SLM), acousto optic modulators (AOM) and deformable and movable mirrors. A few applications where pulse shaping...

  14. Preparing last LEP superconducting module for removal

    CERN Multimedia

    Patrice Loïez

    2000-01-01

    The last superconducting module travels along the LEP tunnel towards one of the shafts where it will be lifted to the surface. Superconducting modules were only used in the LEP-2 phase of the accelerator, from 1996 to 2000.

  15. Multichip module technology for automotive application

    Science.gov (United States)

    Johnson, R. Wayne; Evans, John L.; Bosley, Larry

    1995-01-01

    Advancements in multichip module technology are creating design freedoms previously unavailable to design engineers. These advancements are opening new markets for laminate based multichip module products. In particular, material improvements in laminate printed wiring boards are allowing multichip module technology to meet more stringent environmental conditions. In addition, improvements in encapsulants and adhesives are enhancing the capabilities of multichip module technology to meet harsh environment. Furthermore, improvements in manufacturing techniques are providing the reliability improvements necessary for use in high quality electronic systems. These advances are making multichip module technology viable for high volume, harsh environment applications like under-the-hood automotive electronics. This paper will provide a brief review of multichip module technology, a discussion of specific research activities with Chrysler for use of multichip modules in automotive engine controllers and finally a discussion of prototype multichip modules fabricated and tested.

  16. Perturbation theory for plasmonic modulation and sensing

    KAUST Repository

    Raman, Aaswath; Fan, Shanhui

    2011-01-01

    related to plasma frequency modulation in such systems. Our approach provides new physical insight for the design of plasmonic devices for biochemical sensing and optical modulation and future active metamaterial applications. © 2011 American Physical

  17. Modulation Algorithms for Manipulating Nuclear Spin States

    OpenAIRE

    Liu, Boyang; Zhang, Ming; Dai, Hong-Yi

    2013-01-01

    We exploit the impact of exact frequency modulation on transition time of steering nuclear spin states from theoretical point of view. 1-stage and 2-stage Frequency-Amplitude-Phase modulation (FAPM) algorithms are proposed in contrast with 1-stage and 3-stage Amplitude-Phase modulation (APM) algorithms. The sufficient conditions are further present for transiting nuclear spin states within the specified time by these four modulation algorithms. It is demonstrated that transition time performa...

  18. Automatic modulation classification principles, algorithms and applications

    CERN Document Server

    Zhu, Zhechen

    2014-01-01

    Automatic Modulation Classification (AMC) has been a key technology in many military, security, and civilian telecommunication applications for decades. In military and security applications, modulation often serves as another level of encryption; in modern civilian applications, multiple modulation types can be employed by a signal transmitter to control the data rate and link reliability. This book offers comprehensive documentation of AMC models, algorithms and implementations for successful modulation recognition. It provides an invaluable theoretical and numerical comparison of AMC algo

  19. Polybinary modulation for bandwidth limited optical links

    DEFF Research Database (Denmark)

    Vegas Olmos, Juan José; Jurado-Navas, Antonio

    2015-01-01

    form of partial response modulation, employs simple codification and filtering at the transmitter to drastically increase the spectral efficiency. At the receiver side, poly binary modulation requires low complexity direct detection and very little digital signal processing. This talk will review...... the recent results on poly binary modulation, comprising both binary and multilevel signals as seed signals. The results will show how poly binary modulation effectively reduces the bandwidth requirements on optical links while providing high spectral efficiency....

  20. CLIC Quadrupole Module final report

    CERN Document Server

    Artoos, K; Mainaud-Durand, H

    2013-01-01

    Future Linear colliders will need particle beam sizes in the nanometre range. The beam also needs to be stable all along the beam line. The CLIC Main Beam Quadrupole (MBQ) module has been defined and studied. It is meant as a test stand for stabilisation and pre-alignment with a MB Quadrupole. The main topic that has been tackled concerns the Quadrupole magnet stabilisation to 1nm at 1Hz. This is needed to obtain the desired CLIC luminosity of 2.1034 cm-2m-1. The deliverable was demonstrated by procuring a MBQ and by stabilising a powered and cooled CLIC MBQ quadrupole. In addition, the stabilisation system has to be compatible with the pre-alignment procedures. Pre-alignment movement resolution has been demonstrated to 1m. The last step is the combined test of stability with a quadrupole on a CLIC Module with the pre-alignment.

  1. Wavelength modulation spectroscopy of semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Kohn, S.E.

    1977-10-01

    The use of modulation spectroscopy to study the electronic properties of solids has been very productive. The construction of a wide range Wavelength Modulation Spectrometer to study the optical properties of solids is described in detail. Extensions of the working range of the spectrometer into the vacuum ultraviolet are discussed. Measurements of the reflectivity and derivative reflectivity spectra of the lead chalcogenides, the chalcopyrite ZnGeP/sub 2/, the layer compounds GaSe and GaS and their alloys, the ferroelectric SbSI, layer compounds SnS/sub 2/ and SnSe/sub 2/, and HfS/sub 2/ were made. The results of these measurements are presented along with their interpretation in terms of band structure calculations.

  2. Cavity Voltage Phase Modulation MD

    CERN Document Server

    Mastoridis, Themistoklis; Molendijk, John; Timko, Helga; CERN. Geneva. ATS Department

    2016-01-01

    The LHC RF/LLRF system is currently configured for extremely stable RF voltage to minimize transient beam loading effects. The present scheme cannot be extended beyond nominal beam current since the demanded power would exceed the peak klystron power and lead to saturation. A new scheme has therefore been proposed: for beam currents above nominal (and possibly earlier), the cavity phase modulation by the beam will not be corrected (transient beam loading), but the strong RF feedback and One-Turn Delay feedback will still be active for loop and beam stability in physics. To achieve this, the voltage set point will be adapted for each bunch. The goal of this MD was to test a new algorithm that would adjust the voltage set point to achieve the cavity phase modulation that would minimize klystron forward power.

  3. Gas separation membrane module assembly

    Science.gov (United States)

    Wynn, Nicholas P [Palo Alto, CA; Fulton, Donald A [Fairfield, CA

    2009-03-31

    A gas-separation membrane module assembly and a gas-separation process using the assembly. The assembly includes a set of tubes, each containing gas-separation membranes, arranged within a housing. The housing contains a tube sheet that divides the space within the housing into two gas-tight spaces. A permeate collection system within the housing gathers permeate gas from the tubes for discharge from the housing.

  4. Pulse amplitude modulated chlorophyll fluorometer

    Science.gov (United States)

    Greenbaum, Elias; Wu, Jie

    2015-12-29

    Chlorophyll fluorometry may be used for detecting toxins in a sample because of changes in micro algae. A portable lab on a chip ("LOAC") based chlorophyll fluorometer may be used for toxin detection and environmental monitoring. In particular, the system may include a microfluidic pulse amplitude modulated ("PAM") chlorophyll fluorometer. The LOAC PAM chlorophyll fluorometer may analyze microalgae and cyanobacteria that grow naturally in source drinking water.

  5. The Decision Module Working Paper

    Science.gov (United States)

    1973-12-01

    and goal change has received very little attention In the litera- ture on the analysis of choice situations. It has generally been the case that the...Decision Making: Approach and Prototype" (197:0, done In context of the Mesarovlc - Pestel World Model Projet’ The Issues dealing with «-he cho ce...Nelson, Winder, and Schuette (1973) on evolutionary economic growth models. The discussion of the two components of the decision module that follows

  6. Intensity-modulated radiation therapy.

    Science.gov (United States)

    Goffman, Thomas E; Glatstein, Eli

    2002-07-01

    Intensity-modulated radiation therapy (IMRT) is an increasingly popular technical means of tightly focusing the radiation dose around a cancer. As with stereotactic radiotherapy, IMRT uses multiple fields and angles to converge on the target. The potential for total dose escalation and for escalation of daily fraction size to the gross cancer is exciting. The excitement, however, has greatly overshadowed a range of radiobiological and clinical concerns.

  7. Development of GREET Catalyst Module

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhichao [Argonne National Lab. (ANL), Argonne, IL (United States); Benavides, Pahola T. [Argonne National Lab. (ANL), Argonne, IL (United States); Dunn, Jennifer B. [Argonne National Lab. (ANL), Argonne, IL (United States); Cronauer, Donald C. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-01

    In this report, we develop energy and material flows for the production of five different catalysts (tar reforming, alcohol synthesis, Zeolite Socony Mobil-5 [ZSM-5], Mo/Co/ γ-Al2O3, and Pt/ γ-Al2O3) and two chemicals (olivine, dimethyl ether of polyethylene glycol [DEPG]). These compounds and catalysts are now included in the Greenhouse Gases, Regulated Emissions and Energy Use in Transportation (GREET™) catalyst module.

  8. Applying Economics Using Interactive Learning Modules

    Science.gov (United States)

    Goma, Ophelia D.

    2010-01-01

    This article describes the use of web-based, interactive learning modules in the principles of economics course. The learning modules introduce students to important, historical economic events while providing real-world application of the economic theory presented in class. Each module is designed to supplement and complement the economic theory…

  9. Relative injectivity and CS-modules

    Directory of Open Access Journals (Sweden)

    Mahmoud Ahmed Kamal

    1994-01-01

    Full Text Available In this paper we show that a direct decomposition of modules M⊕N, with N homologically independent to the injective hull of M, is a CS-module if and only if N is injective relative to M and both of M and N are CS-modules. As an application, we prove that a direct sum of a non-singular semisimple module and a quasi-continuous module with zero socle is quasi-continuous. This result is known for quasi-injective modules. But when we confine ourselves to CS-modules we need no conditions on their socles. Then we investigate direct sums of CS-modules which are pairwise relatively inective. We show that every finite direct sum of such modules is a CS-module. This result is known for quasi-continuous modules. For the case of infinite direct sums, one has to add an extra condition. Finally, we briefly discuss modules in which every two direct summands are relatively inective.

  10. New Technologies for Managing Cotton Modules

    Science.gov (United States)

    The use of RFID transponders in the module tags on round modules formed by John Deere harvesters has opened up new possibilities for managing modules and harvest data. Tools are needed to help integrate this new technology and provide additional value to growers and ginners. A mobile application w...

  11. Charging a Capacitor with a Photovoltaic Module

    Science.gov (United States)

    Aguilar, Horacio Munguía; Maldonado, Rigoberto Franco; Navarro, Luis Barba

    2017-01-01

    Charging a capacitor with a photovoltaic module is an experiment which reveals a lot about the modules characteristics. It is customary to represent these characteristics with an equivalent circuit whose elements represent its physical parameters. The behavior of a photovoltaic module is very similar to that of a single cell but the electric…

  12. 47 CFR 101.141 - Microwave modulation.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Microwave modulation. 101.141 Section 101.141... SERVICES Technical Standards § 101.141 Microwave modulation. (a) Microwave transmitters employing digital modulation techniques and operating below 25.25 GHz (except for MVDDS stations in the 12,200-12,700 MHz band...

  13. Antimicrobial and modulation effects of selected Ghanaian ...

    African Journals Online (AJOL)

    The ethanol extracts of the three plants studied here are good modulators as they reduced the MIC of ciprofloxacin and ketoconazole by factors that are comparable to that of reserpine. However the exact compounds and their exact mechanism of modulation require further investigation. Keywords: Anti-infective, modulation, ...

  14. Medical Terminology: Prefixes. Health Occupations Education Module.

    Science.gov (United States)

    Temple Univ., Philadelphia, PA. Div. of Vocational Education.

    This module on medical terminology (prefixes) is one of 17 modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. This module consists of an introduction to prefixes, a list of resources needed, and three learning experiences. Each learning experience contains an…

  15. Specification of the GummyModule Language

    NARCIS (Netherlands)

    Malakuti Khah Olun Abadi, Somayeh

    2012-01-01

    The GummyModule language is an extension to the Java language and is the successor of the EventReactor language The GummyModule language adopts the linguistic constructs of offered by EventReactor to define event types, events and to publish events. As for EventReactor, GummyModule facilitates

  16. Unified Technical Concepts. Module 8: Force Transformers.

    Science.gov (United States)

    Technical Education Research Center, Waco, TX.

    This concept module on force transformers is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy…

  17. Strain absorbent modules for cavity filling

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-01

    Strain absorbent modules made from weldmesh panels and helical steel binders can be used, together with timber packing, to support the roof and sides of cavities instead of softwood and hardwood nogs. A description of these modules and a series of load tests and underground trials carried out on the modules is given.

  18. Building CMS Pixel Barrel Detectur Modules

    CERN Document Server

    König, S; Horisberger, R.; Meier, B.; Rohe, T.; Streuli, S.; Weber, R.; Kastli, H.Chr.; Erdmann, W.

    2007-01-01

    For the barrel part of the CMS pixel tracker about 800 silicon pixel detector modules are required. The modules are bump bonded, assembled and tested at the Paul Scherrer Institute. This article describes the experience acquired during the assembly of the first ~200 modules.

  19. Armstrong practices in Lunar Module simulator

    Science.gov (United States)

    1969-01-01

    Neil A. Armstrong, Commander for the Apollo 11 Moon-landing mission, practices for the historic event in a Lunar Module simulator in the Flight Crew Training building at KSC. Accompanying Armstrong on the Moon flight will be Command Module Pilot Michael Collins and Lunar Module Pilot Edwin E. Aldrin Jr.

  20. Postdictive modulation of visual orientation.

    Directory of Open Access Journals (Sweden)

    Takahiro Kawabe

    Full Text Available The present study investigated how visual orientation is modulated by subsequent orientation inputs. Observers were presented a near-vertical Gabor patch as a target, followed by a left- or right-tilted second Gabor patch as a distracter in the spatial vicinity of the target. The task of the observers was to judge whether the target was right- or left-tilted (Experiment 1 or whether the target was vertical or not (Supplementary experiment. The judgment was biased toward the orientation of the distracter (the postdictive modulation of visual orientation. The judgment bias peaked when the target and distracter were temporally separated by 100 ms, indicating a specific temporal mechanism for this phenomenon. However, when the visibility of the distracter was reduced via backward masking, the judgment bias disappeared. On the other hand, the low-visibility distracter could still cause a simultaneous orientation contrast, indicating that the distracter orientation is still processed in the visual system (Experiment 2. Our results suggest that the postdictive modulation of visual orientation stems from spatiotemporal integration of visual orientation on the basis of a slow feature matching process.

  1. Postdictive modulation of visual orientation.

    Science.gov (United States)

    Kawabe, Takahiro

    2012-01-01

    The present study investigated how visual orientation is modulated by subsequent orientation inputs. Observers were presented a near-vertical Gabor patch as a target, followed by a left- or right-tilted second Gabor patch as a distracter in the spatial vicinity of the target. The task of the observers was to judge whether the target was right- or left-tilted (Experiment 1) or whether the target was vertical or not (Supplementary experiment). The judgment was biased toward the orientation of the distracter (the postdictive modulation of visual orientation). The judgment bias peaked when the target and distracter were temporally separated by 100 ms, indicating a specific temporal mechanism for this phenomenon. However, when the visibility of the distracter was reduced via backward masking, the judgment bias disappeared. On the other hand, the low-visibility distracter could still cause a simultaneous orientation contrast, indicating that the distracter orientation is still processed in the visual system (Experiment 2). Our results suggest that the postdictive modulation of visual orientation stems from spatiotemporal integration of visual orientation on the basis of a slow feature matching process.

  2. Cerebral cortex modulation of pain

    Institute of Scientific and Technical Information of China (English)

    Yu-feng XIE; Fu-quan HUO; Jing-shi TANG

    2009-01-01

    Pain is a complex experience encompassing sensory-discriminative, affective-motivational and cognitiv e-emotional com-ponents mediated by different mechanisms. Contrary to the traditional view that the cerebral cortex is not involved in pain perception, an extensive cortical network associated with pain processing has been revealed using multiple methods over the past decades. This network consistently includes, at least, the anterior cingulate cortex, the agranular insular cortex, the primary (SⅠ) and secondary somatosensory (SⅡ) cortices, the ventrolateral orbital cortex and the motor cortex. These corti-cal structures constitute the medial and lateral pain systems, the nucleus submedius-ventrolateral orbital cortex-periaque-ductal gray system and motor cortex system, respectively. Multiple neurotransmitters, including opioid, glutamate, GABA and dopamine, are involved in the modulation of pain by these cortical structures. In addition, glial cells may also be in-volved in cortical modulation of pain and serve as one target for pain management research. This review discusses recent studies of pain modulation by these cerebral cortical structures in animals and human.

  3. Auditory sensitivity to spectral modulation phase reversal as a function of modulation depth.

    Science.gov (United States)

    Buss, Emily; Grose, John

    2018-01-01

    The present study evaluated auditory sensitivity to spectral modulation by determining the modulation depth required to detect modulation phase reversal. This approach may be preferable to spectral modulation detection with a spectrally flat standard, since listeners appear unable to perform the task based on the detection of temporal modulation. While phase reversal thresholds are often evaluated by holding modulation depth constant and adjusting modulation rate, holding rate constant and adjusting modulation depth supports rate-specific assessment of modulation processing. Stimuli were pink noise samples, filtered into seven octave-wide bands (0.125-8 kHz) and spectrally modulated in dB. Experiment 1 measured performance as a function of modulation depth to determine appropriate units for adaptive threshold estimation. Experiment 2 compared thresholds in dB for modulation detection with a flat standard and modulation phase reversal; results supported the idea that temporal cues were available at high rates for the former but not the latter. Experiment 3 evaluated spectral modulation phase reversal thresholds for modulation that was restricted to either one or two neighboring bands. Flanking bands of unmodulated noise had a larger detrimental effect on one-band than two-band targets. Thresholds for high-rate modulation improved with increasing carrier frequency up to 2 kHz, whereas low-rate modulation appeared more consistent across frequency, particularly in the two-band condition. Experiment 4 measured spectral weights for spectral modulation phase reversal detection and found higher weights for bands in the spectral center of the stimulus than for the lowest (0.125 kHz) or highest (8 kHz) band. Experiment 5 compared performance for highly practiced and relatively naïve listeners, and found weak evidence of a larger practice effect at high than low spectral modulation rates. These results provide preliminary data for a task that may provide a better estimate of

  4. Travailler avec Windows 7 au CERN (FR)

    CERN Multimedia

    CERN. Geneva

    2010-01-01

    Vue d'ensemble des nouveaux concepts et des changements dans l'interface utilisateur survenus dans Windows 7 depuis les versions antérieures de Windows (XP ou Vista). La mise à disposition de Windows 7 au CERN et son intégration dans l’infrastructure de Windows au CERN seront présentées.

  5. Mileva Maric Einstein vivre avec Albert Einstein

    CERN Document Server

    Milentijevic, Radmila

    2013-01-01

    Radmila Milentijevic n’est pas la première à écrire sur les relations entre le génial Albert Einstein et sa première épouse et précieuse collaboratrice durant ses années de recherches, la scientifique serbe Mileva Maric. Mais c’est la première fois qu’un ouvrage traite de cette idylle, puis de ce drame familial qui a duré près de cinquante années, sous une forme quasiment poétique, si rare dans l’historiographie scientifique.Professeur émérite d’histoire à l’université de New York, l’auteur propose ici une monographie riche et vivante, dévoilant une face cachée d’Albert Einstein, et faisant de sa compagne une figure historique de premier plan en même temps qu’un personnage romanesque dont le destin tragique ne laissera aucun lecteur indifférent.

  6. Cotation de fabrication avec les normes ISO

    CERN Document Server

    Anselmetti, Bernard

    2010-01-01

    La cotation ISO en production impose de nouvelles méthodologies pour élaborer les documents de maîtrise de la qualité géométrique des produits : les dessins de phase, du brut et d'états intermédiaires pour la conformité des pièces et les fiches de production, de réglage, de contrôle et de surveillance pour la conformité des moyens de production. Une méthode de transfert unidirectionnelle simple permet d'établir des dessins de phase en normes ISO et d'optimiser la répartition des tolérances à isocapabilité. Cette cotation est déclinée en cotation d'état intermédiaire, de production et de réglage. Une méthode tridimensionnelle est proposée pour prendre en compte les effets des défauts angulaires. Une maquette montre les fonctionnalités envisageables pour les futurs outils d'aides au tolérancement de fabrication au sein de la CFAO. De nombreux exercices illustrent les différentes démarches. Ce Manuel de tolérancement est principalement destiné aux préparateurs méthodes et aux c...

  7. Encephalopathies epileptogenes precoces avec suppression burst ...

    African Journals Online (AJOL)

    African Journal of Neurological Sciences. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 34, No 2 (2015) >. Log in or Register to get access to full text downloads.

  8. Travailler avec Windows 7 au CERN

    CERN Multimedia

    CERN. Geneva

    2011-01-01

    Vue d'ensemble des nouveaux concepts et des changements dans l'interface utilisateur survenus dans Windows 7 depuis les versions antérieures de Windows (XP ou Vista). Le plan de migration à Windows 7 sera aussi débattu.

  9. Travailler avec Windows 7 au CERN

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    Vue d'ensemble des nouveaux concepts et des changements dans l'interface utilisateur survenus dans Windows 7 depuis les versions antérieures de Windows (XP ou Vista). Le plan de migration à Windows 7 sera aussi débattu.

  10. Dialogue avec l'oeuvre ravagee

    NARCIS (Netherlands)

    Marijnissen, R.H.; Kockaert, L.

    2001-01-01

    Au terme de carrieres consacrees a l'examen et a la restauration des chefs-d'oeuvre du patrimoine national deux specialistes un historien de l'art et un microchimiste se sont penches sur les problemes de la conservation une matiere combien complexe inepuisable et controversee depuis bientot trois

  11. Entretien avec Susan Holtz | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    26 nov. 2010 ... À cause des difficultés que pose la convergence des politiques, il semble y avoir un besoin criant d'institutions et de processus nouveaux, voire d'une nouvelle manière d'être culturelle et sociale. À quoi pouvons-nous nous attendre de façon réaliste en ce qui concerne un consensus entre les intervenants, ...

  12. Partenariat avec les Communautes de Base

    International Development Research Centre (IDRC) Digital Library (Canada)

    Administrator

    Social networks are critical safety nets in addressing climate variability and ... and researchers. >Using community knowledge as foundation for ... and resilience? - How do we replicate good practices to reach a critical number of people?

  13. Pour en finir avec les libertins

    Directory of Open Access Journals (Sweden)

    Alain Mothu

    2010-09-01

    Full Text Available Le « libertinage » et les « libertins », notamment « érudits » ou savants, occupent une place de choix dans la production savante actuelle sur la littérature et la culture du xviie siècle. Livres, articles, éditions de textes, anthologies à leur sujet paraissent en grand nombre, y compris dans la prestigieuse « Bibliothèque de la Pléiade » ; ils font l’objet de thèses universitaires, de colloques et de séminaires ; on les trouve même à l’agrégation de Lettres et une revue spécialisée leur est...

  14. Cross-Modulation Interference with Lateralization of Mixed-Modulated Waveforms

    Science.gov (United States)

    Hsieh, I-Hui; Petrosyan, Agavni; Goncalves, Oscar F.; Hickok, Gregory; Saberi, Kourosh

    2010-01-01

    Purpose: This study investigated the ability to use spatial information in mixed-modulated (MM) sounds containing concurrent frequency-modulated (FM) and amplitude-modulated (AM) sounds by exploring patterns of interference when different modulation types originated from different loci as may occur in a multisource acoustic field. Method:…

  15. Development of the module inspection system for new standardized radiation monitoring modules

    International Nuclear Information System (INIS)

    Furukawa, Masami; Shimizu, Kazuaki; Hiruta, Toshihito; Mizugaki, Toshio; Ohi, Yoshihiro; Chida, Tooru.

    1994-10-01

    This report mentions about the module inspection system which does the maintenance check of the monitoring modules adapted the new monitoring standard, as well as the result of the verification of the modules. The module inspection system is the automatic measurement system with the computer. The system can perform the functional and the characteristic examination of the monitoring modules, the calibration with radiation source and inspection report. In the verification of the monitoring module, three major items were tested, the adaptability for the new monitoring standard, the module functions and each characteristics. All items met the new monitoring standard. (author)

  16. Model Development of Degradation of PV Modules Backsheet with Locating Place of Module

    Energy Technology Data Exchange (ETDEWEB)

    Kempe, Michael D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wang, Yu [Case Western Reserve University; Fairbrother, Andrew [National Institute of Standards and Technology (NIST); Merzlic, Sebastien [Arkema; Julien, Scott [Northeastern University; Fridman, Lucas S. [Case Western Reserve University; Loyer, Camille [Arkema; Lefebvre, Amy L. [Arkema; O' Brien, Gregory [Arkema; Gu, Xiaohong [National Institute of Standards and Technology (NIST); Ji, Liang [Underwriters Laboratories; Boyce, Kenneth P. [Underwriters Laboratories; Wan, Kai-tak [Northeastern University; French, Roger H. [Case Western Reserve University; Bruckman, Laura S. [Case Western Reserve University

    2017-08-23

    Performance of a photovoltaic (PV) module is related to the micro-environment around the module. The position of photovoltaic modules in an array row have a large effect on the yellowing and gloss of PV module backsheet exposed in Dfa climatic zone (Gaithersburg, MD) with a polyethylene naphthalate (PEN) outer layer. Stress/Response models of yellowing and gloss-losing as function of location parameters of module, including the shed, row, measurement position in a same module and the distance of module location to the row center, are under development. The module installation height had the greatest influence on degradation of PEN PV backsheet in the Dfa climatic zone. The module backsheets at the end of an array have higher degradation rate (edge effect). The edge effect decreases with increasing of module installation heights.

  17. Can we trust module-respect heuristics?

    International Nuclear Information System (INIS)

    Mo, Yuchang

    2013-01-01

    BDD (Binary Decision Diagrams) have proven to be a very efficient tool to assess Fault Trees. However, the size of BDD, and therefore the efficiency of the whole methodology, depends dramatically on the choice of variable ordering. The determination of the best variable ordering is intractable. Therefore, heuristics have been designed to select reasonably good variable orderings. One very important common feature for good static heuristics is to respect modules. In this paper, the notion of module-respect is studied in a systematic way. It is proved that under certain condition there always exists an optimal ordering that respects modules. This condition is that for each module there is always a smallest module BDD and each included module variable appears only once. On the other hand, it is shown that for the trees not satisfying the above sufficient condition the optimal orderings may not be able to be directly generated using module-respect heuristics, even when the shuffling strategy is used.

  18. APOLLO 10 ASTRONAUT ENTERS LUNAR MODULE SIMULATOR

    Science.gov (United States)

    1969-01-01

    Apollo 10 lunar module pilot Eugene A. Cernan prepares to enter the lunar module simulator at the Flight Crew Training Building at the NASA Spaceport. Cernan, Apollo 10 commander Thomas P. Stafford and John W. Young, command module pilot, are to be launched May 18 on the Apollo 10 mission, a dress rehearsal for a lunar landing later this summer. Cernan and Stafford are to detach the lunar module and drop to within 10 miles of the moon's surface before rejoining Young in the command/service module. Looking on as Cernan puts on his soft helmet is Snoopy, the lovable cartoon mutt whose name will be the lunar module code name during the Apollo 10 flight. The command/service module is to bear the code name Charlie Brown.

  19. Automatic modulation recognition of communication signals

    CERN Document Server

    Azzouz, Elsayed Elsayed

    1996-01-01

    Automatic modulation recognition is a rapidly evolving area of signal analysis. In recent years, interest from the academic and military research institutes has focused around the research and development of modulation recognition algorithms. Any communication intelligence (COMINT) system comprises three main blocks: receiver front-end, modulation recogniser and output stage. Considerable work has been done in the area of receiver front-ends. The work at the output stage is concerned with information extraction, recording and exploitation and begins with signal demodulation, that requires accurate knowledge about the signal modulation type. There are, however, two main reasons for knowing the current modulation type of a signal; to preserve the signal information content and to decide upon the suitable counter action, such as jamming. Automatic Modulation Recognition of Communications Signals describes in depth this modulation recognition process. Drawing on several years of research, the authors provide a cr...

  20. Multichannel time-analyser with an electrostatic memory tube; Analyseur en temps a plusieurs canaux, avec memoire a potentioscopes; Mnogokanal'nye vremennye analizatory s pamyat'yu na potentsialoskopakh; Analizador multicanal de tiempo con tubo de memoria electrostatico

    Energy Technology Data Exchange (ETDEWEB)

    Ignat' ev, K G; Kirpichnikov, I V; Sukhoruchkin, S I

    1962-04-15

    The Academy of Sciences of the USSR has built two multichannel time-analysers with an LN-4 electrostatic memory tube for pulse analysis. These analysers are at present being used for various kinds of measurements; they have the following characteristics: Number of channels - 1024 and 2048, Channel time width - from 0.2 {mu}s upwards, Channel capacity - 4096 pulses and 1024 pulses, Analyser trigger frequency - up to 1000 per second, Pulse load - up to 1000 pulses per second. Measurement results are given by the analysers in the form of graphs and numerical data on perforated cards. (author) [French] A l'Institut de physique theorique et experimentale de l'Academie des sciences de l'Union sovietique, on a construit deux analyseurs d'impulsions en temps, a plusieurs canaux, avec memoire a potentioscopes du type LN-4. A l'heure actuelle ils sont employes pour diverses mesures; leurs caracteristiques sont les suivantes: Nombre de canaux - 1024 et 2048 respectivement, Largeur des canaux en temps-egale ou superieure a 0,2 {mu}s Capacite des canaux - 4096 et 1024 impulsions Frequence de declenchement maximum des analyseurs - 1000 fois par seconde Charge maximum - 1000 impulsions par seconde. Les resultats des mesures sont communiques par les analyseurs sous forme de graphiques et de donnees numeriques sur cartes perforees. (author) [Spanish] En el Instituto de Fisica Teorica y Experimental de la Academia de Ciencias de la Union Sovietica se han construido dos analizadores multicanales de tiempo con un tubo de memoria electrostatico LN-4 para el analisis de impulsos. Estos analizadores, que se utilizan actualmente para efectuar diversos tipos de mediciones, tienen las siguientes caracteristicas: Numero de canales: 1024 y 2048, Anchura de los canales: a partir de 0,2 {mu}s, Capacidad de los canales: 4096 y 1024 impulsos, Frecuencia de disparo del analizador: hasta 1000 por segundo, Carga: hasta 1000 impulsos/s. Los analizadores expresan los resultados de las mediciones en

  1. Nos voisines, les bêtes : situation des conflits avec la faune sauvage dans une aire protégée de la périphérie de Manaus (Amazonas, Brésil

    Directory of Open Access Journals (Sweden)

    Guillaume Marchand

    2012-05-01

    Full Text Available Au cours des trente dernières années, les différentes expérimentations menées en matière de protection de la faune sauvage au Brésil ont conduit à l’élaboration d’aires protégées habitées, jugées plus acceptables et justes sur le plan social. Or, depuis la création de ces espaces, de nombreuses voix ont remis en cause le bien-fondé de ce genre de réserve, considérant que la cohabitation avec la faune sauvage pouvait potentiellement avoir des effets négatifs dans les domaines environnementaux et sociaux. Cet article s’intéresse à l’état des conflits entre humains et faune sauvage dans une communauté appartenant à la réserve de développement durable de Tupé, à la périphérie de Manaus. Il observe notamment la façon dont les conflits sont perçus et résolus afin de montrer la diversité des représentations quant aux espèces problématiques ainsi que les enjeux sociaux et environnementaux qui reposent sur leur protection.  During the last thirty years, few different experiments on protection of wild fauna in Brazil have led to the development of inhabited protected areas, seen as socially more acceptable and fairer. However, since their creation, the validity of this kind of protected areas has been questioned, considering that the coexistence between men and wild fauna may have negative effects for environment as well as local communities. This paper focuses on human/wildlife conflicts in a rural community in the sustainable development reserve of Tupé, located in the periphery of Manaus city. It mainly observes how conflicts are perceived and resolved and it shows how diverse are the representations regarding problematic species, as well as environmental and social issues related to their protection.

  2. Les médicaments à libération prolongée pour les enfants et les adolescents ayant un trouble de déficit de l’attention avec hyperactivité

    Science.gov (United States)

    Feldman, M; Bélanger, S

    2009-01-01

    Le trouble de déficit de l’attention avec hyperactivité (TDAH) touche un enfant canadien sur 20 et s’associe à un dossier scolaire et à un registre d’emploi défavorables, à des taux élevés de blessures et de consommation de drogues ou d’alcool, à des relations interpersonnelles médiocres, à de mauvaises issues en santé mentale et à une qualité de vie insatisfaisante. Des essais contrôlés démontrent que les médica-ments sont efficaces pour traiter les symptômes de TDAH tandis que des études d’observation indiquent qu’ils s’associent à de meilleures issues sociales et de santé. De nombreuses familles, ainsi que leur médecin traitant, préfèrent les médicaments à libération prolongée (LP) contre le TDAH aux médicaments à libération immédiate (LI) et à action brève. Toutefois, les préparations à LP sont souvent inabor-dables pour les familles, dont un nombre disproportionné fait partie de la strate à faible statut socioéconomique. Le présent document de principes vise à proposer une évaluation critique des données probantes sur l’efficacité relative des médicaments à LP par rapport aux médicaments à LI ainsi que des recommandations au sujet de leur utilisation convenable dans le traitement du TDAH. Lorsque les médicaments sont indiqués, il faut envisager d’utiliser des préparations à LP comme traitement de première intention contre le TDAH parce qu’elles sont plus efficaces et moins susceptibles d’être détournées. Les futures recherches et les analyses coûts-avantages doivent tenir compte à la fois de l’efficacité de médicaments dans des études contrôlées et de leur efficacité clinique en situation réelle ainsi que du potentiel de détournement et de mésusage de ces médicaments. L’industrie, les sociétés d’assurance et le gouvernement doivent collaborer pour rendre ces médicaments accessibles à tous les enfants et adolescents ayant un TDAH.

  3. Impregnation of Graphite with Liquid Silicon in a Vacuum; Impregnation du graphite avec du silicium llquide sous vide; Propitka grafita kremniem v vakuume; Impregnacion de grafito con silicio liquido en el vacio

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov, V. E.; Zelenskij, V. F.; Kolendovskij, M. K.; Kolomiets, L. D.

    1963-11-15

    A study was made of the possibility of producing high thermal resistance graphite-silicon carbide materials by means of impregnating MG graphite with liquid silicon in a vacuum. An attempt is made to explain the mechanism and origins of the degradation of products during the impregnation process. On the basis of their researches the authors put forward a number of technical requirements, observance of which make it possible to produce graphite-silicon carbide materials by means of impregnation of graphite with liquid silicon-in a vacuum at temperatures of 1450 to 1600 deg. C. (author) [French] Les auteurs etudient la possibilite d'obtenir, en impregnant du graphite MG avec du silicium liquide sous vide, des materiaux au graphite, carbure et silicium resistants a la chaleur. Ils cherchent a expliquer le mecanisme et les causes de la destruction des produits au cours de l'impregnation. Se fondant sur les resultats de leurs recherches, ils enoncent un certain nombre de conditions technologiques a remplir pour obtenir les materiaux en question en impregnant le graphite de silicium liquide sous vide, a une temperature de l'ordre de 1450 a 1600 deg. C. (author) [Spanish] Los autores han estudiado la posibilidad de preparar materiales de grafito y carburo de silicio de elevada resistencia termica impregnando grafito marca MG con silicio liquido en el vacio. Proponen una explicacion del mecanismo y de las causas de la degradacion de los productos durante la impregnacion. Sobre la base de las investigaciones realizadas, los autores enumeran una serie de condiciones tecnologicas cuyo cumplimiento permite preparar piezas de grafito y carburo de silicio, impregnando el grafito con silicio liquido en el vacio a temperaturas comprendidas entre 1450 y 1600 deg. C. [Russian] V rabote izuchalas' vozmozhnost' sozdaniya grafit-karbidkremnievykh materialov s povyshennoj termostojkost'yu putem propitki grafita marki MG zhidkim kremniem v vakuume. Sdelana popytka ob{sup y

  4. Facteurs influençant l'initiation au traitement antirétroviral des personnes vivant avec le VIH dans les Centres de Traitement Agréés de Bamenda et de Bertoua au Cameroun

    Science.gov (United States)

    Mbopi-Keou, Francois-Xavier; Voundi, Esther Voundi; Kalla, Ginette Claude Mireille; Emah, Irène; Angwafo, Fru; Muna, Walinjom

    2014-01-01

    Introduction L'objectif de ce travail était de déterminer les facteurs influençant l'initiation au traitement antirétroviral des personnes vivant avec le VIH (PVVIH) dans les centres de traitements agrées (CTA) de Bamenda et de Bertoua au Cameroun. Méthodes Il s'agissait d'une étude transversale, analytique réalisée de Janvier à Avril 2011, dans les CTA de Bamenda et de Bertoua. Pour cette étude, nous avons obtenu une clairance éthique. Résultats Nous avons étudiés 460 dossiers de patients séropositifs en phase d'initiation au traitement antirétroviral dans les CTA de Bamenda et de Bertoua, 53,9% et 46,1% respectivement. L ‘âge médian était de 36 ans. La plupart des séropositifs à Bertoua (41) avaient fait un dépistage volontaire du VIH par rapport à ceux de Bamenda (22) (p= 0.008). Il y ‘avait plus de VIH de type 1 et 2 dans le CTA de Bamenda (15) par rapport à Bertoua (3) (p= 0.011). La majorité des patients était classé au stade clinique II à Bamenda (54,0%) tandis qu ‘à Bertoua le stade clinique III était prédominant (52,4%) (p = 0,000). Le taux médian de CD4 était de 133 cellules/mm3 dans le CTA de Bamenda et de 175 cellules/mm3 à Bertoua (p = 0,008). La Zidovudine était plus prescrit à Bamenda et le Ténofovir à Bertoua (p = 0,000). L ‘Efavirenz était plus prescrit à Bertoua tandis que la Névirapine l ‘était plus à Bamenda (p = 0,000). Le Lopinavir/r était plus prescrit à Bamenda qu ‘à Bertoua (p = 0,017). Conclusion Il apparait urgent de standardiser la prise en charge des PVVIH dans les CTA du Cameroun. PMID:25184023

  5. It’s not what it looks to be! : Déconnexion entre forme et sens dans les énoncés avec verbe de perception à emploi dit “copule”

    Directory of Open Access Journals (Sweden)

    Christelle LACASSAIN-LAGOIN

    2012-03-01

    Full Text Available Cet article a pour objet l’analyse de la déconnexion entre forme et sens dans les énoncés où figurent les verbes de perception à emploi dit copule (look, sound, smell, taste et feel. L’origine de ces verbes est sujette à débat et il est avancé ici une hypothèse sur l’origine nominale de ces verbes, ainsi que sur leur comportement syntaxique et sémantique unique. Il apparaît que, dans ce type d’énoncés, le sujet grammatical n’est pas le sujet logique du verbe, qui a un emploi modalisant en ce qu’il exprime un jugement sur les apparences perceptuelles. Ce conflit apparent entre syntaxe et sémantique transparaît également au niveau de certains types d’attributs du sujet (les syntagmes nominaux, les syntagmes prépositionnels introduits par OF et les propositions en AS IF / AS THOUGH. L’étude montre que tous les attributs renvoient nécessairement à des propriétés gradables, ce qui n’est pas le cas avec le verbe copule be. Ainsi, ces énoncés copulatifs, où le verbe de perception a un emploi modalisant, présentent tous, à plusieurs titres et de diverses manières, un phénomène de compression syntaxique et sémantique motive par l’application d’un principe d’économie langagière.This paper aims at analysing the disconnection between form and meaning in sentences involving copular perception verbs (look, sound, smell, taste and feel. The origin of these verbs is a controversial issue, and in this article, it is argued that they have a nominal origin and that they have identical syntactic and semantic features. It appears that, in these copulative sentences, the grammatical subject does not coincide with the underlying subject of the verb, which has a modalising use as it expresses a judgment concerning sensory appearances. This surface conflict between syntax and semantics also shows in certain types of subject complements – nominal phrases, OF-prepositional phrases and AS IF/AS THOUGH-clauses. This

  6. A Powertrain LQR-Torque Compensator with Backlash Handling Régulation par LQR d’une chaîne cinématique automobile avec jeu : simulation et étude expérimentale

    Directory of Open Access Journals (Sweden)

    Templin P.

    2011-10-01

    Full Text Available This paper derives an LQR anti-jerk controller for an automotive driveline. The time derivative of the drive shaft torque, which is closely related to the vehicle jerk, is used as a virtual system output and regulated to zero. Thereby, the controller does not need a reference model for generation of reference trajectories for the control law evaluation. The controller acts as a torque compensator for the driver’s torque demand which the controller output asymptotically follows. The properties of the controller are discussed and the behavior is illustrated by simulation examples and verified with experiments on a heavy duty truck. Cet article présente un dérivé de régulateur anti-saccades LQR destiné à une chaîne cinématique automobile. La dérivée par rapport au temps du couple de l’arbre de transmission, qui est en relation étroite avec la saccade du véhicule, est utilisée en tant que donnée de sortie de système virtuel et régulée à zéro. Ainsi, le régulateur ne nécessite pas de modèle de référence destiné à la génération de trajectoires de référence pour l’évaluation de la loi de régulation. Le régulateur agit en tant que compensateur de couple pour la demande de couple du conducteur que les données de sortie du régulateur suivent asymptotiquement. Les propriétés du régulateur sont étudiées et le comportement est illustré par des exemples de simulation et vérifiées à l’aide d’expériences sur un camion à usage industriel.

  7. Flexible packaging for PV modules

    Science.gov (United States)

    Dhere, Neelkanth G.

    2008-08-01

    Economic, flexible packages that provide needed level of protection to organic and some other PV cells over >25-years have not yet been developed. However, flexible packaging is essential in niche large-scale applications. Typical configuration used in flexible photovoltaic (PV) module packaging is transparent frontsheet/encapsulant/PV cells/flexible substrate. Besides flexibility of various components, the solder bonds should also be flexible and resistant to fatigue due to cyclic loading. Flexible front sheets should provide optical transparency, mechanical protection, scratch resistance, dielectric isolation, water resistance, UV stability and adhesion to encapsulant. Examples are Tefzel, Tedlar and Silicone. Dirt can get embedded in soft layers such as silicone and obscure light. Water vapor transmittance rate (WVTR) of polymer films used in the food packaging industry as moisture barriers are ~0.05 g/(m2.day) under ambient conditions. In comparison, light emitting diodes employ packaging components that have WVTR of ~10-6 g/(m2.day). WVTR of polymer sheets can be improved by coating them with dense inorganic/organic multilayers. Ethylene vinyl acetate, an amorphous copolymer used predominantly by the PV industry has very high O2 and H2O diffusivity. Quaternary carbon chains (such as acetate) in a polymer lead to cleavage and loss of adhesional strength at relatively low exposures. Reactivity of PV module components increases in presence of O2 and H2O. Adhesional strength degrades due to the breakdown of structure of polymer by reactive, free radicals formed by high-energy radiation. Free radical formation in polymers is reduced when the aromatic rings are attached at regular intervals. This paper will review flexible packaging for PV modules.

  8. Head position modulates optokinetic nystagmus.

    Science.gov (United States)

    Pettorossi, V E; Ferraresi, A; Botti, F M; Panichi, R; Barmack, N H

    2011-08-01

    Orientation and movement relies on both visual and vestibular information mapped in separate coordinate systems. Here, we examine how coordinate systems interact to guide eye movements of rabbits. We exposed rabbits to continuous horizontal optokinetic stimulation (HOKS) at 5°/s to evoke horizontal eye movements, while they were statically or dynamically roll-tilted about the longitudinal axis. During monocular or binocular HOKS, when the rabbit was roll-tilted 30° onto the side of the eye stimulated in the posterior → anterior (P → A) direction, slow phase eye velocity (SPEV) increased by 3.5-5°/s. When the rabbit was roll-tilted 30° onto the side of the eye stimulated in the A → P direction, SPEV decreased to ~2.5°/s. We also tested the effect of roll-tilt after prolonged optokinetic stimulation had induced a negative optokinetic afternystagmus (OKAN II). In this condition, the SPEV occurred in the dark, "open loop." Modulation of SPEV of OKAN II depended on the direction of the nystagmus and was consistent with that observed during "closed loop" HOKS. Dynamic roll-tilt influenced SPEV evoked by HOKS in a similar way. The amplitude and the phase of SPEV depended on the frequency of vestibular oscillation and on HOKS velocity. We conclude that the change in the linear acceleration of the gravity vector with respect to the head during roll-tilt modulates the gain of SPEV depending on its direction. This modulation improves gaze stability at different image retinal slip velocities caused by head roll-tilt during centric or eccentric head movement.

  9. Amplitude modulation reflectometer for FTU

    International Nuclear Information System (INIS)

    Zerbini, M.; Buratti, P.; Centioli, C.; Amadeo, P.

    1995-06-01

    Amplitude modulation (AM) reflectometry is a modification of the classical frequency sweep technique which allows to perform unambiguous phase delay measurements. An eight-channel AM reflectometer has been realized for the measurement of density profiles on the FTU tokamak in the range. The characteristics of the instrument have been determined in extensive laboratory tests; particular attention has been devoted to the effect of interference with parasitic reflections. The reflectometer is now operating on FTU. Some examples of the first experimental data are discussed

  10. Klystrons and modulators for SBLC

    Energy Technology Data Exchange (ETDEWEB)

    Bieler, M.; Choroba, S.; Hameister, J.; Lewin, H.-Ch. [Deutsches Elektronen-Synchrotron DESY, Hamburg (Germany)

    1997-04-01

    For SBLC, the DESY/THD S-band linear collider study, klystrons with 150 MW rf-pulse power at 50 Hz repetition rate and 3 {mu}s pulse duration are required [1]. This paper will give a short overview of the SBLC parameters and the S-band test linac at DESY. Two different modulator schemes, the conventional line type pulser and the hard tube pulser, will be discussed. After a brief description of the 150 MW S-band klystron the first operating experience with the klystron and a line type pulser at DESY will be presented. (author)

  11. Projective modules and complete intersections

    CERN Document Server

    Mandal, Satya

    1997-01-01

    In these notes on "Projective Modules and Complete Intersections" an account on the recent developments in research on this subject is presented. The author's preference for the technique of Patching isotopic isomorphisms due to Quillen, formalized by Plumsted, over the techniques of elementary matrices is evident here. The treatment of Basic Element theory here incorporates Plumstead's idea of the "generalized dimension functions". These notes are highly selfcontained and should be accessible to any graduate student in commutative algebra or algebraic geometry. They include fully self-contained presentations of the theorems of Ferrand-Szpiro, Cowsik-Nori and the techniques of Lindel.

  12. WEBSITE EXECUTION OF CAD MODULES

    Directory of Open Access Journals (Sweden)

    A. A. Lyalinsky

    2013-01-01

    Full Text Available Web-based interface of modules that are part of the computer-aided design system in microelectronics is considered. The influence of several factors (available computer  memory, maximum allowed run time, degree of homogeneity of the software on the structure of the created system is investigated. Synchronous and asynchronous variants of interaction between control and executive parts are described. References on the systems that allow an access to applications in CAD microelectronics and are based on the principles discussed in this article are given.

  13. Temperature Modulated Nanomechanical Thermal Analysis

    DEFF Research Database (Denmark)

    Alves, Gustavo Marcati A.; Bose-Goswami, Sanjukta; Mansano, Ronaldo D.

    2018-01-01

    The response of microcantilever deflection to complex heating profiles was used to study thermal events like glass transition and enthalpy relaxation on nanograms of the biopolymer Poly(lactic-co-glycolic acid) (PLGA). The use of two heating rates enables the separation of effects on the deflection...... response that depends on previous thermal history (non-reversing signal) and effects that depends only on the heating rate variation (reversing signal). As these effects may appear superposed in the total response, temperature modulation can increase the measurement sensitivity to some thermal events when...

  14. Modulation of Current Source Inverter

    Directory of Open Access Journals (Sweden)

    Golam Reza Arab Markadeh

    2011-04-01

    Full Text Available Direct torque control with Current Source Inverter (CSI instead of voltage source inverter is so appropriate because of determining the torque of induction motor with machine current and air gap flux. In addition, Space-Vector Modulation (SVM is a more proper method for CSI because of low order harmonics reduction, lower switching frequency and easier implementation. This paper introduces the SVM method for CSI and uses the proposed inverter for vector control of an induction motor. The simulation results illustrate fast dynamic response and desirable torque and speed output. Fast and accurate response to changes of speed and load torque reference completely proves the prominence of this method.

  15. Epigenetic modulators of thyroid cancer.

    Science.gov (United States)

    Rodríguez-Rodero, Sandra; Delgado-Álvarez, Elías; Díaz-Naya, Lucía; Martín Nieto, Alicia; Menéndez Torre, Edelmiro

    2017-01-01

    There are some well known factors involved in the etiology of thyroid cancer, including iodine deficiency, radiation exposure at early ages, or some genetic changes. However, epigenetic modulators that may contribute to development of these tumors and be helpful to for both their diagnosis and treatment have recently been discovered. The currently known changes in DNA methylation, histone modifications, and non-coding RNAs in each type of thyroid carcinoma are reviewed here. Copyright © 2016 SEEN. Publicado por Elsevier España, S.L.U. All rights reserved.

  16. Bag-like contaminant control work module

    International Nuclear Information System (INIS)

    Buchanan, H.; Jacobson, E.B.

    1982-01-01

    A bag-like contaminant control work module is formed from a flexible impervious membrane which is inflated inside of an enclosed workspace to protect workers in the module from contaminants. The workspace, such as in a nuclear power steam generator, has a portal or manway opening into the workspace into which the module is secured by a module passageway. The module includes one or more glove boxes, in which the workers perform their assigned tasks after passing through the passageway and portal. The module includes one or more absolute filters allowing passage of air flow through the module passageway and into the workspace only through the filters. The module may include an auxiliary passageway secured to the outside of the module passageway and also secured in the portal opening and through which items can be passed back and forth to the worker in the glove box from outside the portal. The module is invertible so that it can be pulled out of the workspace trapping all the contaminants therein and disposed of without handling the contaminants

  17. Effets de l'interaction avec l'oxygène sur le comportement de couches semi-conductrices de ZnO, SnO{2} et CdSe

    Science.gov (United States)

    Ain-Souya, A.; Ghers, M.; Haddad, A.; Tebib, W.; Rehamnia, R.; Messsalhi, A.; Bounouala, M.; Djouama, M. C.

    2005-05-01

    Les propriétés superficielles des matériaux solides diffèrent de celles du volume. A la surface, des défauts de différentes natures peuvent être présents. Ils permettent à la surface d'être interactive avec le milieu ambiant. Les multiples interactions entre les états de surface et des éléments du milieu extérieur peuvent modifier les propriétés superficielles. Ce travail étudie la régénération de couches semi-conductrices après adsorption isotherme d'oxygène à différentes températures effectuées entre 20 ° C et 300 ° C. Les matériaux qui ont servi à l'étude sont des couches de ZnO, SnO{2} et CdSe. Celles de CdSe ont été obtenues par co-évaporation, sous vide, de cadmium et de sélénium. Les échantillons de ZnO et SnO{2} ont été élaborés par oxydation, à des températures respectives de 450 ° C et 200 ° , de Zn et Sn déposés par électrolyse et par évaporation sous vide. Les matériaux évaporés ont été déposés sur des plaquettes en verre, les autres ont été électrodéposés sur des substrats métalliques. Les variations des propriétés électriques des couches ont été suivies par mesure de leur résistance électrique superficielle R. Les courbes LogR = f (103 /T (K)), relevées sous vide à différentes températures, sont caractéristiques d'un comportement de semi-conducteur. Des essais d'adsorption d'O{2} à différentes températures montrent des variations considérables de R. En effet, la chimisorption forte d'un gaz par une surface semi-conductrice est telle que l'échange électronique entre adsorbant et adsorbat provoque la formation d'une zone de charge d'espace modifiant la conduction superficielle. Les résultats mettent en évidence des domaines de température de plus haute sensibilité à l'oxygène. Pour le CdSe, certaines désorptions isothermes ont été suffisantes pour une régénération totale des échantillons. Les couches de ZnO ont souvent nécessité des désorptions programm

  18. Nutritional Modulation of Insulin Resistance

    Directory of Open Access Journals (Sweden)

    Martin O. Weickert

    2012-01-01

    Full Text Available Insulin resistance has been proposed as the strongest single predictor for the development of Type 2 Diabetes (T2DM. Chronic oversupply of energy from food, together with inadequate physical activity, have been recognized as the most relevant factors leading to overweight, abdominal adiposity, insulin resistance, and finally T2DM. Conversely, energy reduced diets almost invariably to facilitate weight loss and reduce abdominal fat mass and insulin resistance. However, sustained weight loss is generally difficult to achieve, and distinct metabolic characteristics in patients with T2DM further compromise success. Therefore, investigating the effects of modulating the macronutrient composition of isoenergetic diets is an interesting concept that may lead to additional important insights. Metabolic effects of various different dietary concepts and strategies have been claimed, but results from randomized controlled studies and particularly from longer-term-controlled interventions in humans are often lacking. However, some of these concepts are supported by recent research, at least in animal models and short-term studies in humans. This paper provides an update of the current literature regarding the role of nutrition in the modulation of insulin resistance, which includes the discussion of weight-loss-independent metabolic effects of commonly used dietary concepts.

  19. Serial powering of pixel modules

    International Nuclear Information System (INIS)

    Stockmanns, Tobias; Fischer, Peter; Huegging, Fabian; Peric, Ivan; Runolfsson, O.; Wermes, Norbert

    2003-01-01

    Modern pixel detectors for the next generation of high-energy collider experiments like LHC use readout electronics in deep sub-micron technology. Chips in this technology need a low supply voltage of 2-2.5 V alongside high current consumption to achieve the desired performance. The high supply current leads to significant voltage drops in the long and low mass supply cables so that voltage fluctuations at the chips are induced, when the supply current changes. This problem scales with the number of modules when connected in parallel to the power supplies. An alternative powering scheme connects several modules in series resulting in a higher supply voltage but a lower current consumption of the chain and therefore a much lower voltage drop in the cables. In addition the amount of cables needed to supply the detector is vastly reduced. The concept and features of serial powering are presented and studies of the implementation of this technology as an alternative for the ATLAS pixel detector are shown. In particular, it is shown that the potential risk of powering in series can be addressed and eliminated

  20. Bioelectric modulation of macrophage polarization

    Science.gov (United States)

    Li, Chunmei; Levin, Michael; Kaplan, David L.

    2016-02-01

    Macrophages play a critical role in regulating wound healing and tissue regeneration by changing their polarization state in response to local microenvironmental stimuli. The native roles of polarized macrophages encompass biomaterials and tissue remodeling needs, yet harnessing or directing the polarization response has been largely absent as a potential strategy to exploit in regenerative medicine to date. Recent data have revealed that specific alteration of cells’ resting potential (Vmem) is a powerful tool to direct proliferation and differentiation in a number of complex tissues, such as limb regeneration, craniofacial patterning and tumorigenesis. In this study, we explored the bioelectric modulation of macrophage polarization by targeting ATP sensitive potassium channels (KATP). Glibenclamide (KATP blocker) and pinacidil (KATP opener) treatment not only affect macrophage polarization, but also influence the phenotype of prepolarized macrophages. Furthermore, modulation of cell membrane electrical properties can fine-tune macrophage plasticity. Glibenclamide decreased the secretion and gene expression of selected M1 markers, while pinacidil augmented M1 markers. More interestingly, glibencalmide promoted macrophage alternative activation by enhancing certain M2 markers during M2 polarization. These findings suggest that control of bioelectric properties of macrophages could offer a promising approach to regulate macrophage phenotype as a useful tool in regenerative medicine.

  1. Attentional modulation of reflex cough.

    Science.gov (United States)

    Janssens, Thomas; Silva, Mitchell; Davenport, Paul W; Van Diest, Ilse; Dupont, Lieven J; Van den Bergh, Omer

    2014-07-01

    Reflex cough is a defensive response generated in the brainstem in response to chemical and mechanical stimulation of the airways. However, converging evidence shows that reflex cough is also influenced by central neural control processes. In this study, we investigate whether reflex cough can be modulated by attentional focus on either external stimuli or internal cough-related stimuli. Healthy volunteers (N = 24; seven men; age range, 18-25 years) completed four blocks of citric acid-induced cough challenges while, simultaneously, auditory stimuli were presented. Within each block, four concentrations were administered (30, 100, 300 and 1,000 mM, randomized). During two subsequent blocks, participants focused their attention externally (counting tones). During the other two blocks, participants focused their attention internally (counting coughs). The order of attentional focus was counterbalanced across participants. Ratings of the urge to cough were collected after each challenge. Cough frequency was determined by audio recording. Cough frequency was higher when participants focused their attention internally vs externally (P Reflex cough can be modulated by attentional focus. Internally focused attention may be a mechanism involved in excessive (idiopathic) cough, while an external focus may be introduced as part of treatments targeting excessive cough.

  2. Serial powering of pixel modules

    CERN Document Server

    Stockmanns, Tobias; Hügging, Fabian Georg; Peric, I; Runólfsson, O; Wermes, Norbert

    2003-01-01

    Modern pixel detectors for the next generation of high-energy collider experiments like LHC use readout electronics in deep sub- micron technology. Chips in this technology need a low supply voltage of 2-2.5 V alongside high current consumption to achieve the desired performance. The high supply current leads to significant voltage drops in the long and low mass supply cables so that voltage fluctuations at the chips are induced, when the supply current changes. This problem scales with the number of modules when connected in parallel to the power supplies. An alternative powering scheme connects several modules in series resulting in a higher supply voltage but a lower current consumption of the chain and therefore a much lower voltage drop in the cables. In addition the amount of cables needed to supply the detector is vastly reduced. The concept and features of serial powering are presented and studies of the implementation of this technology as an alternative for the ATLAS pixel detector are shown. In par...

  3. Performance of the steam generators of Phenix in steady-state operation - comparison with predicted values; Performances des generateurs de vapeur de Phenix en regime permanent: Comparison avec les previsions

    Energy Technology Data Exchange (ETDEWEB)

    Robin, M G; Duchatelle, L; De Nucheze, L

    1975-07-01

    Theoretical and experimental performances in steady state conditions of the prototype modules and the commercial unit of the Phenix Steam Generator were compared. It is shown that, as early as 1969, our computer code allowed us a fair prediction of the required heat transfer area, and of the full load performance of the Phenix Steam Generator. (author)

  4. KNN BASED CLASSIFICATION OF DIGITAL MODULATED SIGNALS

    Directory of Open Access Journals (Sweden)

    Sajjad Ahmed Ghauri

    2016-11-01

    Full Text Available Demodulation process without the knowledge of modulation scheme requires Automatic Modulation Classification (AMC. When receiver has limited information about received signal then AMC become essential process. AMC finds important place in the field many civil and military fields such as modern electronic warfare, interfering source recognition, frequency management, link adaptation etc. In this paper we explore the use of K-nearest neighbor (KNN for modulation classification with different distance measurement methods. Five modulation schemes are used for classification purpose which is Binary Phase Shift Keying (BPSK, Quadrature Phase Shift Keying (QPSK, Quadrature Amplitude Modulation (QAM, 16-QAM and 64-QAM. Higher order cummulants (HOC are used as an input feature set to the classifier. Simulation results shows that proposed classification method provides better results for the considered modulation formats.

  5. Self oscillating PWM modulators, a topological comparison

    DEFF Research Database (Denmark)

    Poulsen, Søren; Andersen, Michael Andreas E.

    2004-01-01

    or fs/ð range respectively, where fs is the switching frequency of the converter. For some applications this will require unacceptable high switching frequency to achieve enough control loop bandwidth for the desired dynamic performance. With self oscillating modulators, the open loop bandwidth is equal...... to fs which makes this type of modulators an excellent choice for a wide range of applications. Self oscillating PWM modulators can be made in a number of ways, either as voltage or current mode modulators, and the self oscillating behavior can be achieved either by using hysteresis control...... or by shaping the open loop function of the modulator so its gain and phase response causes a closed loop natural oscillation. The two main types of self oscillating modulators have many similarities, but differences in dynamic performance and linearity are present. The work presented is related to the author...

  6. Power module assemblies with staggered coolant channels

    Science.gov (United States)

    Herron, Nicholas Hayden; Mann, Brooks S; Korich, Mark D

    2013-07-16

    A manifold is provided for supporting a power module assembly with a plurality of power modules. The manifold includes a first manifold section. The first face of the first manifold section is configured to receive the first power module, and the second face of the first manifold section defines a first cavity with a first baseplate thermally coupled to the first power module. The first face of the second manifold section is configured to receive the second power module, and the second face of the second manifold section defines a second cavity with a second baseplate thermally coupled to the second power module. The second face of the first manifold section and the second face of the second manifold section are coupled together such that the first cavity and the second cavity form a coolant channel. The first cavity is at least partially staggered with respect to second cavity.

  7. SUPPORT CARD FOR THE FORWARD SCT MODULE

    CERN Document Server

    Greenall, A

    2002-01-01

    Previously in the development and testing stage of ATLAS SCT Forward modules support cards have been used which interface the module to the DAQ by using only the Redundant inputs for the module configuration and the 'spying' of the ABCD Master chip(s) data. As module development has matured there is now a necessity to be able to test modules in the laboratory using also their Primary input/output data routes i.e. using the optical chips DORIC [1] and VDC [2] but without the need of optical fibres. A Forward Kapton Support Card, FKSC, has been developed so that both Primary and Redundant data routes can be used for module testing.

  8. Induction accelerator test module for HIF

    International Nuclear Information System (INIS)

    Faltens, A.

    1991-04-01

    An induction linac test module suitable for investigating the drive requirements and the longitudinal coupling impedance of a high-power ion induction linac has been constructed by the Heavy Ion Fusion (HIF) group at LBL. The induction linac heavy ion driver for inertial confinement fusion (ICF) as presently envisioned uses multiple parallel beams which are transported in separate focusing channels but accelerated together in the induction modules. The resulting induction modules consequently have large beam apertures-1--2 meters in diameter- and correspondingly large outside diameters. The module geometry is related to a low-frequency ''gap capacity'' and high-frequency structural resonances, which are affected by the magnetic core loading and the module pulser impedance. A description of the test module and preliminary results are presented. 3 figs

  9. Plasma Stability in Magnetic Mirror Machine with Stabilizing Rods; Stabilite du Plasma dans une Machine a Miroirs Magnetiques avec Barreaux de Stabilisation; Ustojchivost' plazmy v probkotrone so stabiliziruyushchimi sterzhnyami; Estabilidad del Plasma en una Trampa de Espejos con Barras Estabilizadoras

    Energy Technology Data Exchange (ETDEWEB)

    Trubnikov, B. A. [Institut Atomnoj Ehnergii Im. I.V. Kurchatova, Moskva, SSSR (Russian Federation)

    1966-04-15

    magnetic mirror machine. (In comparing theory with experiment it is assumed that the plasma is described by a Maxwellian distribution with a cut-out cone and it expands in length right up to the magnetic mirrors. To avoid numerical calculations, we discuss in this article the case x = z{sub max}/ Script-Small-L << 1; this is, however, extrapolated to x {approx} 1, which is admissible for semi-quantitative evaluations.) In addition to the infinite rods, we discuss stabilizing rods of finite length, which can be realized with multipole magnets of finite length. Stabilization can be achieved even in the extreme case of very short rods, where they can be regarded as a system of 2n magnetic point dipoles located in the central plane of the magnetic mirror machine on a circle of radius a, and directed along the radius away from the axis (or towards the axis - the directions alternate). Such systems, which we considered at the suggestion of Artsimovich, are very promising since their structure facilitates access to the plasma and makes it possible to install additional devices for diagnostics or for heating the plasma. (author) [French] L'auteur etend le critere bien connu Greek-Small-Letter-Delta {integral} Script-Small-L / B < 0 au cas arbitraire des champs a dissymetrie axiale. A cet effet, il convient d'exprimer ce critere par a formule: {integral}( Greek-Small-Letter-Delta B/B{sup 2}) (P{sub 0} + P{sub Up-Tack }) d Script-Small-L > 0; ou Greek-Small-Letter-Delta B = s x {Delta}B est l'accroissement du module du champ sur la ligne de force voisine (exterieure), s etant perpendicualire a B. Le critere mentionne est applique a l'etude de la stabilite du plasma dans une machine a miroirs magnetiques comportant des barreaux de stabilisation. Le champ au voisinage de l'axe est decrit par le potentiel scalaire: {psi} = {integral} B{sub 0} (z) dz - B{sub 0}{sup 1} (z) r 2/4 + g (z) r{sup n} cos n{phi} Pour le champ situe sur l'axe proprement dit, on admet l'approximation parabolique

  10. Bactericidal effectiveness of modulated UV light

    International Nuclear Information System (INIS)

    Bank, H.L.; John, J.; Schmehl, M.K.; Dratch, R.J.

    1990-01-01

    Studies were designed to evaluate the effectiveness of pulsed modulated UV light waveforms for killing bacteria. Exposure of five strains of bacteria to the modulated information encoded in the light decreased the colony population from a confluent lawn to less than 20 colonies. However, approximately 2,000 colonies survived treatment with the same intensity and time of exposure to UV light lacking the modulated information

  11. Fast heat flux modulation at the nanoscale

    OpenAIRE

    van Zwol, P. J.; Joulain, K.; Abdallah, P. Ben; Greffet, J. J.; Chevrier, J.

    2011-01-01

    We introduce a new concept for electrically controlled heat flux modulation. A flux contrast larger than 10 dB is expected with switching time on the order of tens of nanoseconds. Heat flux modulation is based on the interplay between radiative heat transfer at the nanoscale and phase change materials. Such large contrasts are not obtainable in solids, or in far field. As such this opens up new horizons for temperature modulation and actuation at the nanoscale.

  12. String Stretching, Frequency Modulation, and Banjo Clang

    OpenAIRE

    Politzer, David

    2014-01-01

    The banjo’s floating bridge, string break angle, and flexible drumhead all contribute to substantial audio range frequency modulation. From the world of electronic music synthesis, it is known that modulating higher frequency sounds with lower acoustic frequencies leads to metallic and bell-like tone. The mechanics of the banjo does just that quite naturally, modulating fundamentals and harmonics with the motion of the bridge. In technical terms, with a floating bridge, string stretching is f...

  13. Computing optimal interfacial structure of modulated phases

    OpenAIRE

    Xu, Jie; Wang, Chu; Shi, An-Chang; Zhang, Pingwen

    2016-01-01

    We propose a general framework of computing interfacial structures between two modulated phases. Specifically we propose to use a computational box consisting of two half spaces, each occupied by a modulated phase with given position and orientation. The boundary conditions and basis functions are chosen to be commensurate with the bulk structures. It is observed that the ordered nature of modulated structures stabilizes the interface, which enables us to obtain optimal interfacial structures...

  14. Generalized module extension Banach algebras: Derivations and ...

    African Journals Online (AJOL)

    Let A and X be Banach algebras and let X be an algebraic Banach A-module. Then the ℓ-1direct sum A x X equipped with the multiplication (a; x)(b; y) = (ab; ay + xb + xy) (a; b ∈ A; x; y ∈ X) is a Banach algebra, denoted by A ⋈ X, which will be called "a generalized module extension Banach algebra". Module extension ...

  15. Production chain of CMS pixel modules

    CERN Multimedia

    2006-01-01

    The pictures show the production chain of pixel modules for the CMS detector. Fig.1: overview of the assembly procedure. Fig.2: bump bonding with ReadOut Chip (ROC) connected to the sensor. Fig.3: glueing a raw module onto the baseplate strips. Fig.4: glueing of the High Density Interconnect (HDI) onto a raw module. Fig.5: pull test after heat reflow. Fig.6: wafer sensor processing, Indium evaporation.

  16. Zingiber officinale Roscoe aqueous extract modulates ...

    African Journals Online (AJOL)

    Zingiber officinale Roscoe aqueous extract modulates Matrixmetalloproteinases and tissue inhibitors of Metalloproteinases expressions in Dengue virus-infected cells: implications for prevention of vascular permeability.

  17. ATLAS SCT - Progress on the Silicon Modules

    CERN Multimedia

    Tyndel, M.

    The ATLAS SCT consists of 4088 silicon modules. Each module is made up of 4 silicon sensors with 1536 readout strips. Individual strips are connected to FE amplifiers, discriminators and pipelines on the module, i.e. there are 12 radiation hard ASICs, each containing 128 channels on the module. The sensors and the ASICs were developed for the ATLAS experiment and production is proceeding smoothly with over half the components delivered. The components of a module - 4 silicon sensors, a Cu/polyimide hybrid and pitch adaptor, and 12 ASICs - need to be carefully and precisely assembled onto a carbon and ceramic framework, which supports the module and removes the heat. Eleven production clusters are preparing to carry this out over the next two years. An important milestone for the barrel modules has been passed with the first cluster (KEK) now in production (~40 modules produced). A second cluster UK-B has qualified by producing five modules within specification (see below) and is about to start production. T...

  18. Frequency-Diversity Reception for Phase Modulation

    Science.gov (United States)

    Brockman, M. H.

    1984-01-01

    Signal-to-noise ratio improved. System receives phase modulation transmitted simultaneously on different carrier frequencies. Used for carriers received through different antennas or through same antenna.

  19. PLC control of 50 MW klystron modulators

    International Nuclear Information System (INIS)

    Shang Lei; Liu Gongfa; Chen Liping; Lu Yeming; Hong Jun; Zhang Yi; Zhao Feng

    2004-01-01

    Upgrade project of the 50 MW klystron modulators of Hefei Light Source (HLS) was firstly introduced. PLC control system of modulators was employed to replace the old control and monitor system, which was based on relay logic circuit and manual operation method. the PLC system becomes a sub system of the new EPICS control system of HLS. Constant-current, switch-mode and high voltage power supplies were adopted to replace the old 50 Hz power supplies. The technology of modulators was improved and operation was more reliable. The design method, hardware and software of PLC control of modulators were described and the performance was presented. (authors)

  20. NLC Hybrid Solid State Induction Modulator

    CERN Document Server

    Cassel, R L; Pappas, G C; Delamare, J E

    2004-01-01

    The Next Linear Collider accelerator proposal at SLAC requires a high efficiency, highly reliable, and low cost pulsed power modulator to drive the X-band klystrons. The original NLC envisions a solid state induction modulator design to drive up to 8 klystrons to 500 kV for 3 μs at 120 PPS with one modulator delivering greater than 1,000 MW pulse, at 500 kW average. A change in RF compression techniques resulted in only two klystrons needed pulsing per modulator at a reduced pulse width of 1.6 μsec or approximately 250 MW of the pulsed power and 80 kW of average powers. A prototype Design for Manufacturability (DFM) 8-pack modulator was under construction at the time of the change, so a redirection of modulator design was in order. To utilities the equipment which had already be fabricated, a hybrid modulator was designed and constructed using the DFM induction modulator parts and a conventional pulse transformer. The construction and performance of this hybrid two klystron Induction modul...

  1. Modulation of gene expression made easy

    DEFF Research Database (Denmark)

    Solem, Christian; Jensen, Peter Ruhdal

    2002-01-01

    A new approach for modulating gene expression, based on randomization of promoter (spacer) sequences, was developed. The method was applied to chromosomal genes in Lactococcus lactis and shown to generate libraries of clones with broad ranges of expression levels of target genes. In one example...... that the method can be applied to modulating the expression of native genes on the chromosome. We constructed a series of strains in which the expression of the las operon, containing the genes pfk, pyk, and ldh, was modulated by integrating a truncated copy of the pfk gene. Importantly, the modulation affected...

  2. Millimeter Wave Modulators Using Quantum Dots

    National Research Council Canada - National Science Library

    Prather, Dennis W

    2008-01-01

    In this effort electro-optic modulators for millimeter wave sensing and imaging were developed and demonstrated via design, fabrication, and experimental characterization of multi layer quantum dot...

  3. SLAC modulator system improvements and reliability results

    International Nuclear Information System (INIS)

    Donaldson, A.R.

    1998-06-01

    In 1995, an improvement project was completed on the 244 klystron modulators in the linear accelerator. The modulator system has been previously described. This article offers project details and their resulting effect on modulator and component reliability. Prior to the project, the authors had collected four operating cycles (1991 through 1995) of MTTF data. In this discussion, the '91 data will be excluded since the modulators operated at 60 Hz. The five periods following the '91 run were reviewed due to the common repetition rate at 120 Hz

  4. Global model structures for ∗-modules

    DEFF Research Database (Denmark)

    Böhme, Benjamin

    2018-01-01

    We extend Schwede's work on the unstable global homotopy theory of orthogonal spaces and L-spaces to the category of ∗-modules (i.e., unstable S-modules). We prove a theorem which transports model structures and their properties from L-spaces to ∗-modules and show that the resulting global model...... structure for ∗-modules is monoidally Quillen equivalent to that of orthogonal spaces. As a consequence, there are induced Quillen equivalences between the associated model categories of monoids, which identify equivalent models for the global homotopy theory of A∞-spaces....

  5. METHOD AND MODULE FOR OPTICAL SUBCARRIER LABELLING

    DEFF Research Database (Denmark)

    2004-01-01

    The present invention relates to optical labelling in WDM networks, in that it provides a method and a module to be used in subcarrier label generation and switching in network edge nodes and core switch nodes. The methods and modules are typically employed in Optical Subcarrier Multiplexing (OSCM......) transmitters. The payload and the label are encoded independently on optical carrier and subcarrier signals respectively, using electro-optical modulators. The invention applies single or double sideband carrier-suppressed modulation to generate subcarrier signals for encoding of the label. Thereby the payload...... encoded carrier signal and the label encoded subcarrier signal can be coupled directly without prior filtering....

  6. Photovoltaic module energy rating methodology development

    Energy Technology Data Exchange (ETDEWEB)

    Kroposki, B.; Myers, D.; Emery, K.; Mrig, L. [National Renewable Energy Lab., Golden, CO (United States); Whitaker, C.; Newmiller, J. [Endecon Engineering, San Ramon, CA (United States)

    1996-05-01

    A consensus-based methodology to calculate the energy output of a PV module will be described in this paper. The methodology develops a simple measure of PV module performance that provides for a realistic estimate of how a module will perform in specific applications. The approach makes use of the weather data profiles that describe conditions throughout the United States and emphasizes performance differences between various module types. An industry-representative Technical Review Committee has been assembled to provide feedback and guidance on the strawman and final approach used in developing the methodology.

  7. Integrated Performance Testing Workshop, Modules 6 - 11

    Energy Technology Data Exchange (ETDEWEB)

    Leach, Janice; Torres, Teresa M.

    2012-10-01

    These modules cover performance testing of: Interior Detection Systems; Access Controls; Exterior Detection Systems; Video Assessment Systems; SNM / Contraband Detection Systems; Access Delay Elements

  8. Dense module enumeration in biological networks

    Science.gov (United States)

    Tsuda, Koji; Georgii, Elisabeth

    2009-12-01

    Analysis of large networks is a central topic in various research fields including biology, sociology, and web mining. Detection of dense modules (a.k.a. clusters) is an important step to analyze the networks. Though numerous methods have been proposed to this aim, they often lack mathematical rigorousness. Namely, there is no guarantee that all dense modules are detected. Here, we present a novel reverse-search-based method for enumerating all dense modules. Furthermore, constraints from additional data sources such as gene expression profiles or customer profiles can be integrated, so that we can systematically detect dense modules with interesting profiles. We report successful applications in human protein interaction network analyses.

  9. Dense module enumeration in biological networks

    International Nuclear Information System (INIS)

    Tsuda, Koji; Georgii, Elisabeth

    2009-01-01

    Analysis of large networks is a central topic in various research fields including biology, sociology, and web mining. Detection of dense modules (a.k.a. clusters) is an important step to analyze the networks. Though numerous methods have been proposed to this aim, they often lack mathematical rigorousness. Namely, there is no guarantee that all dense modules are detected. Here, we present a novel reverse-search-based method for enumerating all dense modules. Furthermore, constraints from additional data sources such as gene expression profiles or customer profiles can be integrated, so that we can systematically detect dense modules with interesting profiles. We report successful applications in human protein interaction network analyses.

  10. Cascaded Amplitude Modulations in Sound Texture Perception

    Directory of Open Access Journals (Sweden)

    Richard McWalter

    2017-09-01

    Full Text Available Sound textures, such as crackling fire or chirping crickets, represent a broad class of sounds defined by their homogeneous temporal structure. It has been suggested that the perception of texture is mediated by time-averaged summary statistics measured from early auditory representations. In this study, we investigated the perception of sound textures that contain rhythmic structure, specifically second-order amplitude modulations that arise from the interaction of different modulation rates, previously described as “beating” in the envelope-frequency domain. We developed an auditory texture model that utilizes a cascade of modulation filterbanks that capture the structure of simple rhythmic patterns. The model was examined in a series of psychophysical listening experiments using synthetic sound textures—stimuli generated using time-averaged statistics measured from real-world textures. In a texture identification task, our results indicated that second-order amplitude modulation sensitivity enhanced recognition. Next, we examined the contribution of the second-order modulation analysis in a preference task, where the proposed auditory texture model was preferred over a range of model deviants that lacked second-order modulation rate sensitivity. Lastly, the discriminability of textures that included second-order amplitude modulations appeared to be perceived using a time-averaging process. Overall, our results demonstrate that the inclusion of second-order modulation analysis generates improvements in the perceived quality of synthetic textures compared to the first-order modulation analysis considered in previous approaches.

  11. Tic Modulation Using Sensory Tricks

    Directory of Open Access Journals (Sweden)

    Rebecca W. Gilbert

    2013-04-01

    Full Text Available Background: A sensory trick, or geste antagoniste, is defined as a physical gesture (such as a touch on a particular body part that mitigates the production of an involuntary movement. This phenomenon is most commonly described as a feature of dystonia. Here we present a case of successful modulation of tics using sensory tricks.Case Report:: A case report and video are presented. The case and video demonstrate a 19-year-old male who successfully controlled his tics with various sensory tricks.Discussion: It is underappreciated by movement disorder physicians that sensory tricks can play a role in tics. Introducing this concept to patients could potentially help in tic control. In addition, understanding the pathophysiological underpinnings of sensory tricks could help in the understanding of the pathophysiology of tics.

  12. Comparaison of Atlas Tilecal module

    CERN Document Server

    Batusov1, V; Gayde, J C; Khubua, J I; Lasseur, C; Lyablin, M V; Miralles-Verge, L; Nessi, Marzio; Rusakovitch, N A; Sissakian, A N; Topilin, N D

    2002-01-01

    The high precision assembly of a large experimental set-ups is of a principal necessity for the successful execution of the forthcoming LHC research program in the TeV-beams. The creation of an adequate Survey&Control METROLOGY METHODs are an essential part of the detector construction scenario. This work contains the dimension measurement data for ATLAS hadron calorimeter MODULE#8 (6m long, 22tons) which were obtained by LASER and by PHOTOGRAMMETRY methods. The comparative data analysis demonstrates the measurements agreement within ±70mm. It means these two clearly independent methods can be combined and lead to the rise of a new generation engineering culture: high precision metrology when precision assembly of large scale massive objects.

  13. SSD with generalized phase modulation

    International Nuclear Information System (INIS)

    Rothenberg, J.

    1996-01-01

    Smoothing by spectral dispersion (SSD) with standard frequency modulation (FM), although simple to implement, has the disadvantage that low spatial frequencies present in the spectrum of the target illumination are not smoothed as effectively as with a more general smoothing method (eg, induced spatial incoherence method). The reduced smoothing performance of standard FM-SSD can result in spectral power of the speckle noise at these low spatial frequencies as much as one order of magnitude larger than that achieved with a more general method. In fact, at small integration times FM-SSD has no smoothing effect at all for a broad band of low spatial frequencies. This effect may have important implications for both direct and indirect drive ICF

  14. Solar dynamic power module design

    Science.gov (United States)

    Secunde, Richard R.; Labus, Thomas L.; Lovely, Ronald G.

    1989-01-01

    Studies have shown that the use of solar dynamic (SD) power for the growth areas of the Space Station Freedom program will result in life cycle cost savings when compared to power supplied by photovoltaic sources. In the SD power module, a concentrator collects and focuses solar energy into a heat receiver which has integral thermal energy storage. A Power Conversion Unit (PCU) based on the closed Brayton cycle removes thermal energy from the receiver and converts that energy to electrical energy. Since the closed Brayton cycle is a single phase gas cycle, the conversion hardware (heat exchangers, turbine, compressor, etc.) can be designed for operation in low earth orbit, and tested with confidence in test facilities on earth before launch into space. The concentrator subassemblies will be aligned and the receiver/PCU/radiator combination completely assembled and charged with gas and cooling liquid on earth before launch to, and assembly on, orbit.

  15. Pharmacological modulation of arterial stiffness.

    LENUS (Irish Health Repository)

    Boutouyrie, Pierre

    2011-09-10

    Arterial stiffness has emerged as an important marker of cardiovascular risk in various populations and reflects the cumulative effect of cardiovascular risk factors on large arteries, which in turn is modulated by genetic background. Arterial stiffness is determined by the composition of the arterial wall and the arrangement of these components, and can be studied in humans non-invasively. Age and distending pressure are two major factors influencing large artery stiffness. Change in arterial stiffness with drugs is an important endpoint in clinical trials, although evidence for arterial stiffness as a therapeutic target still needs to be confirmed. Drugs that independently affect arterial stiffness include antihypertensive drugs, mostly blockers of the renin-angiotensin-aldosterone system, hormone replacement therapy and some antidiabetic drugs such as glitazones. While the quest continues for \\'de-stiffening drugs\\

  16. Interfacial modulation of urban affect

    DEFF Research Database (Denmark)

    Samson, Kristine

    Urban culture can increasingly be understood as interface culture (Munster) in which urban design, cultural institutions and architecture increasingly operate as affective interfaces distributing and mediating human perception, consumption and social encounters. As noted by Amin and Thrift (2002......, Massey 2006), they also exclude in depth social and human interaction. Through analysis of three examples of urban affective interfaces (The High Line in New York, Superkilen in Copenhagen and Stålsat By, Frederiksværk, the paper examines how affective urban interfaces modulate and mediate urban...... environments as bodily and sensorial experiences. It asks what is mediated through the interface – whether the. It also asks, what is excluded when urban environments become affective interfaces in the global networked city. Whereas urban interface collect and distribute the bodily and sensible in relational...

  17. ALICE Time of Flight Module

    CERN Multimedia

    The Time-Of-Flight system of ALICE consists of 90 such modules, each containing 15 or 19 Multigap Resistive Plate Chamber (MRPC) strips. This detector is used for identification of charged particles. It measures with high precision (50 ps) the time of flight of charged particles and therefore their velocity. The curvature of the particle trajectory inside the magnetic field gives the momentum, thus the particle mass is calculated and the particle is identified The MRPC is a stack of resistive glass plates, separated from each other by nylon fishing line. The mass production of the chambers (~1600, covering a surface of 150 m2) was done at INFN Bologna, while the first prototypes were bult at CERN.

  18. Development of GREET Catalyst Module

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhichao [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Dunn, Jennifer B. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Cronauer, Donald C. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division

    2014-09-01

    Catalysts are critical inputs for many pathways that convert biomass into biofuels. Energy consumption and greenhouse gas (GHG) emissions during the production of catalysts and chemical inputs influence the life-cycle energy consumption, and GHG emissions of biofuels and need to be considered in biofuel life-cycle analysis (LCA). In this report, we develop energy and material flows for the production of three different catalysts (tar reforming, alcohol synthesis, Zeolite Socony Mobil-5 [ZSM-5]) and two chemicals (olivine, dimethyl ether of polyethylene glycol [DEPG]). These compounds and catalysts are now included in the Greenhouse Gases, Regulated Emissions and Energy Use in Transportation (GREET™) catalyst module. They were selected because they are consumed in existing U.S. Department of Energy (DOE) analyses of biofuel processes. For example, a thermochemical ethanol production pathway (indirect gasification and mixed alcohol synthesis) developed by the National Renewable Energy Laboratory (NREL) uses olivine, DEPG, and tar reforming and alcohol synthesis catalysts (Dutta et al., 2011). ZSM-5 can be used in biofuel production pathways such as catalytic upgrading of sugars into hydrocarbons (Biddy and Jones, 2013). Other uses for these compounds and catalysts are certainly possible. In this report, we document the data sources and methodology we used to develop material and energy flows for the catalysts and compounds in the GREET catalyst module. In Section 2 we focus on compounds used in the model Dutta et al. (2011) developed. In Section 3, we report material and energy flows associated with ZSM-5 production. Finally, in Section 4, we report results.

  19. Modulating wind power plant output using different frequency modulation components for damping grid oscillations

    DEFF Research Database (Denmark)

    2017-01-01

    A method, controller, wind power plant, and computer program product are disclosed for operating a wind power plant comprising a plurality of wind turbines, the wind power plant producing a plant power output. The method comprises receiving a modulation request signal indicating a requested...... modulation of the plant power output, the requested modulation specifying a modulation frequency. The method further comprises generating a respective power reference signal for each of at least two wind turbines of the plurality of wind turbines selected to fulfill the requested modulation, Each generated...... power reference signal includes a respective modulation component corresponding to a portion of the requested modulation and having a frequency different than the modulation frequency....

  20. Significantly High Modulation Efficiency of Compact Graphene Modulator Based on Silicon Waveguide.

    Science.gov (United States)

    Shu, Haowen; Su, Zhaotang; Huang, Le; Wu, Zhennan; Wang, Xingjun; Zhang, Zhiyong; Zhou, Zhiping

    2018-01-17

    We theoretically and experimentally demonstrate a significantly large modulation efficiency of a compact graphene modulator based on a silicon waveguide using the electro refractive effect of graphene. The modulation modes of electro-absorption and electro-refractive can be switched with different applied voltages. A high extinction ratio of 25 dB is achieved in the electro-absorption modulation mode with a driving voltage range of 0 V to 1 V. For electro-refractive modulation, the driving voltage ranges from 1 V to 3 V with a 185-pm spectrum shift. The modulation efficiency of 1.29 V · mm with a 40-μm interaction length is two orders of magnitude higher than that of the first reported graphene phase modulator. The realisation of phase and intensity modulation with graphene based on a silicon waveguide heralds its potential application in optical communication and optical interconnection systems.

  1. Radiation-Induced Copolymerization of Tetrafluoroethylene with {alpha}-Olefine; Copolymersation radiochimique du tetrafluoroethylene avec l'olefine {alpha}; Radiatsionnaya sopolimerizatsiya tetraftorehtilena s {alpha}-olefinom; Copolimerizacion radioquimica del tetrafluoroetileno con la olefina {alpha}

    Energy Technology Data Exchange (ETDEWEB)

    Tabata, Y.; Ishigure, K.; Shibano, H.; Oshima, K.; Sobue, H. [University of Tokyo, Tokyo (Japan)

    1963-11-15

    Radiationinduced copolymerizations of olefine monomers with tetrafluoroethylene will be reported. In the cases of ethylene and propylene, the composition of copolymers obtained varies continuously with molar concentration of the components in the monomer mixture, and their melting point varies continuously in the range between the melting points of the composing homopolymers. In the case of isobutene, the composition of copolymer remains constant with the ratio of one to one (alternating copolymer) irrespective of the change in concentration of the components in the monomer mixture and its melting point remains constant (about 200{sup o}C). The copolymers of tetrafluoroethylene/ethylene and tetrafluoroethylene/isobutene show high crystallinity. All the copolymerizations are believed to proceed by a radical mechanism. The case of tetrafluoroethylene/ isobutene seems to be the first observation of alternating copolymer obtained by radical copolymerization. The monomer reactivity ratio of these systems is determined. (author) [French] Les auteurs donnent des indications sur la copolymerisation radioinduite de monomeres d'olefines et du tetrafluoroethylene. Dans le cas de l'ethylene et du propylene, la composition des copolymeres obtenus varie de maniere constante avec la concentration molaire des elements du melange de monomeres, et leur point de fusion varie de maniere constante dans l'intervalle compris entre les points de fusion des homopolymeres qui les composent. Dans le cas de l'isobutene, la composition du copolymere demeure constante dans la proportion de un a un (copolymere alternant), independamment des changements de la concentration des composants du melange de monomeres, et son point de fusion reste constant (200{sup o}C environ). Les copolymeres du tetrafluoroethyleneethylene et du tetrafluoroethylene-isobutene presentent un degre eleve de cristallinite. Les auteurs arrivent a la conclusion que toutes les copolymerisations se font par effet des radicaux

  2. Du journal papier au cyberjournal en pédagogie du projet avec des primo-arrivants : rupture ou complémentarité ? From printed newspaper to hypertext newspaper: rupture or complementarity in project work with recently settled pupils?

    Directory of Open Access Journals (Sweden)

    Xavier Lavry

    2003-06-01

    Full Text Available Mettre en place une pédagogie du projet avec un groupe de collégiens primo-arrivants dans le cadre d’une classe de Français Langue Seconde offre la possibilité d’entamer un travail à la fois sur les aspects structurels et pragmatiques de la langue. Cette pratique de classe permet en effet, lors de l’apprentissage du français, l’inscription des apprenants dans une activité langagière authentique. Le projet que nous avons organisé s’est développé en deux étapes : la première concernait la fabrication d’un journal papier et la seconde la réalisation d’un cyberjournal. Le passage entre ces deux étapes sous-entend une prise en charge complète par les élèves d’outils relevant des TIC (Technologies de l'Information et de la Communication, par exemple en ce qui concerne la création de pages Internet et l'entourage technique et donc une confrontation à de nouveaux supports d’apprentissage. En nous basant sur trois niveaux d’analyse (les activités d’apprentissage mises en place, le processus de collaboration et le rôle et la place de l’outil informatique nous déterminons les similitudes, nouveautés ou différences entre les deux formes du projet. Nous verrons ainsi que les processus de construction et de transformation des connaissances intervenant dans chacune des étapes sont soumis à un phénomène de rupture ou de complémentarité.Setting up IT-mediated project work with secondary school children in a French as a Second Language class gives the opportunity to work on both structural and pragmatic aspects of language. As far as the learning of French is concerned, this classroom technique allows learners to be involved in authentic language activity. The pedagogical project which we set up was organized in two stages: the elaboration of a newspaper followed by the elaboration of a cyber-magazine. The passage between these two stages implies the complete management by the children of the computer tools

  3. Control module and module for priority set-up for the CAMAC universal branch driver

    International Nuclear Information System (INIS)

    Nguen Fuk; Smirnov, V.A.

    1976-01-01

    Control module of BKD-871 universal branch driver operates as a controller in the control crate. This module performs synchronous data transmission to (from) the computer and shapes time signals for A-type controllers. The following regimes of data block transmission may be organized with the help of the control module: address scanning regime; repeated reference regime; stop regime. A priority driving module is required for organization of simultaneous operation from several control sources

  4. XPM-induced degradation of multilevel phase modulated channel caused by neighboring NRZ modulated channels

    DEFF Research Database (Denmark)

    Jensen, Jesper Bevensee; Schiellerup, G.; Peucheret, Christophe

    2008-01-01

    The impact of XPM from NRZ modulated channels on an 8-level phase modulated channel in a WDM system was investigated. Requirements on launch power are found. 400 km transmission was achieved with negligible penalty.......The impact of XPM from NRZ modulated channels on an 8-level phase modulated channel in a WDM system was investigated. Requirements on launch power are found. 400 km transmission was achieved with negligible penalty....

  5. Étude de la technique d'échange ionique avec compétition. Cas du dépôt de platine sur support solide acide par échange cationique Research on the Ion Exchange Technique with Competition. Case of Platinum Deposit on a Solid Acid Support by Cation Exchange

    Directory of Open Access Journals (Sweden)

    Ribeiro F.

    2006-11-01

    Full Text Available Cet article présente une étude détaillée de la technique de dépôt de platine sur support acide par échange cationique avec compétition. Cette technique permet d'obtenir à la fois une dispersion quasi atomique et une répartition macroscopique homogène du métal sur la surface du solide. En l'absence de limitations diffusionnelles extra-granulaires, les résultats expérimentaux sont en bon accord avec les prévisions théoriques . This article is a detailed examination of the technique of depositing platinum on an acid support by cation exchange with compétition. This technique produces both a quasi-atomic dispersion and a homogeneous macroscopic distribution of the métal onthe surface of the solid. In the absence of extragranular diffusion limitations, experimental findings are in good agreement with theoretical predictions.

  6. Perceptions des patients pouvant influencer l’autonomisation en lien avec l’éducation à la santé tertiaire ainsi que les stratégies potentiellement autonomisantes : analyse de synthèse interprétative critique

    Directory of Open Access Journals (Sweden)

    Assumpta Ndengeyingoma

    2014-07-01

    Full Text Available Puisque la gestion d’une situation de santé serait quasi impossible sans que le patient acquière certaines compétences, ce texte explore les perceptions des patients pouvant influencer leur autonomisation en situation d’éducation tertiaire et identifie des stratégies potentiellement autonomisantes pour les adresser. L’approche synthèse interprétative critique fût utilisée. Trois perceptions des patients sont résumées : la perception d’être partenaire avec les professionnels, la perception de la compréhension de leur état et la perception de l’influence ou du contrôle de leur situation. Identification de stratégies de nature éducative et comportementale. Les perceptions des patients démontrent qu’ils ne se sentent pas aussi autonomisés que les professionnels pensent, alors il est recommandé de reconnaître les perceptions qui nuisent à l’autonomisation, ainsi que des stratégies pour les gérer. Ceci inclut la considération du niveau de littératie en santé du patient ainsi que l’utilisation accrue d’outils validés avec des méthodes qualitatives auprès de populations variées.

  7. Modélisation par éléments finis 3D du champ magnétostatique dans les enroulements des réactances cuirassées de grande puissance. Comparaison avec le calcul en 2D

    Science.gov (United States)

    Ngnegueu, Triomphant; Terme, Claude; Mailhot, Michel

    1993-03-01

    In this paper, the finite element method is applied for the computation of the magnetostatic field in the windings of a shell-form reactor. The modeling is carried out in 3D, using FLUX3D, a software developed at the Laboratoire d'Electrotechnique de Grenoble. The results are compared to those obtained in 2D. These calculation results are also compared to some test results. Dans cet article, nous décrivons une application de la méthode des éléments finis pour la modélisation du champ magnétostatique dans les enroulements d'une réactance cuirassée de grande puissance. La modélisation est conduite en 3D, en utilisant le logiciel FLUX3D. Les résultats du calcul sont comparés avec ceux obtenus en 2D. Quelques comparaisons sont aussi effectuées avec des résultats de mesure.

  8. Phonologie et morphosyntaxe de l’anglais dans un produit SIC : le premier module de MACAO Phonologie et morphosyntaxe de l’anglais dans un produit SIC : le premier module de MACAO

    Directory of Open Access Journals (Sweden)

    Laurence Vincent-Durroux

    2002-12-01

    Full Text Available La préoccupation fréquente, chez les étudiants spécialistes d’autres disciplines que l’anglais, d’améliorer leur compréhension de l’anglais oral a motivé notre démarche de création d’un produit SIC (Systèmes d’Information et de Communication : MACAO (Modules d’Aide à la Compréhension de l’Anglais Oral. Le premier module, "S’entraîner à la reconnaissance", est réalisé et l’outil informatique s’est révélé particulièrement utile pour notre projet. Dans cet article, nous faisons état des difficultés récurrentes en compréhension de l’anglais oral : elles peuvent être dues à des attentes erronées fondées sur la dissymétrie entre la langue écrite et la langue orale, mais aussi à une reconnaissance difficile de certains morphèmes par l’existence de variantes phonologiques en fonction du contexte et par la proximité phonologique de certains morphèmes. Nous présentons également comment le contenu du premier module tente d’apporter des solutions à ces difficultés : en amenant les apprenants à prendre conscience du phénomène de réduction vocalique et d’inaccentuation qui touche certaines syllabes des mots aussi bien que certains éléments monosyllabiques de l’énoncé et en proposant un entraînement à la reconnaissance de ces éléments. Le module est en cours de validation avec une phase d’évaluation.French students who have English as part of their curriculum often express the wish to improve their comprehension of oral English. This led us to envisage the creation of a CALL product: MACAO (Modules to help in the comprehension of oral English. The first module has been created: "Training oneself for recognition". The computer was particularly adequate in this prospect. In this paper we present the most frequent difficulties in the comprehension of oral English: they can be related either to erroneous expectations based on the dissymmetry between the written form and the oral

  9. Finite Element calculations of heat transfer for Forward SCT ModulesPart I - the Outer Module

    CERN Document Server

    Blocki, J; Perrin, E

    2000-01-01

    A status report on the thermal performance of the baseline SCT forward modules is presented. Possible design changes of the outer module which lead to significant improvements of the thermal characteristics of the module are indicated, in the context of a 2-point cooling scheme.

  10. Spectro-temporal modulation masking patterns reveal frequency selectivity.

    Science.gov (United States)

    Oetjen, Arne; Verhey, Jesko L

    2015-02-01

    The present study investigated the possibility that the human auditory system demonstrates frequency selectivity to spectro-temporal amplitude modulations. Threshold modulation depth for detecting sinusoidal spectro-temporal modulations was measured using a generalized masked threshold pattern paradigm with narrowband masker modulations. Four target spectro-temporal modulations were examined, differing in their temporal and spectral modulation frequencies: a temporal modulation of -8, 8, or 16 Hz combined with a spectral modulation of 1 cycle/octave and a temporal modulation of 4 Hz combined with a spectral modulation of 0.5 cycles/octave. The temporal center frequencies of the masker modulation ranged from 0.25 to 4 times the target temporal modulation. The spectral masker-modulation center-frequencies were 0, 0.5, 1, 1.5, and 2 times the target spectral modulation. For all target modulations, the pattern of average thresholds for the eight normal-hearing listeners was consistent with the hypothesis of a spectro-temporal modulation filter. Such a pattern of modulation-frequency sensitivity was predicted on the basis of psychoacoustical data for purely temporal amplitude modulations and purely spectral amplitude modulations. An analysis of separability indicates that, for the present data set, selectivity in the spectro-temporal modulation domain can be described by a combination of a purely spectral and a purely temporal modulation filter function.

  11. Actitudes de docentes de educación básica hacia las TIC (Attitudes of Teachers in Basic Education Towards ICT (Attitudes des enseignants d'éducation basique avec las TIC (Atitudes de docentes de educação básica frente às TIC

    Directory of Open Access Journals (Sweden)

    Joel Angulo-Armenta

    2011-06-01

    Full Text Available ResumenSe realizó un estudio relacional cuantitativo con el pro- pósito de describir las actitudes de los docentes hacia las TIC y su relación con variables sociodemográficas de los mismos (edad y género y con aquellas que indican posibilidades de acceso a las tecnologías (com- putadora en el hogar y Enciclomedia en el salón de clases. Los resultados señalan que de manera general los docentes poseen actitudes positivas hacia las TIC, especialmente en los docentes de género masculino y en aquellos que cuentan con mayores posibilidades de interacción con las mismas.AbstractA quantitative relational study was conducted in order to describe the attitudes of teachers towards ICT and their relation to certain socio-demo- graphic variables (age and gender and to variables that indicate accessibility of technology (computer at home and Enciclomedia —a bank of multimedia resources— in the classroom. The re- sults indicate the teachers generally have positive attitudes towards ICT, especially male teachers and those who have a greater chance of interac- tion with them.RésuméOn a réalisé une étude relationnelle quantitative avec l'objectif de décrire les attitudes des enseignants par ra- pport aux TIC et leurs rapport avec les variables sociodémographiques (âge et genre et avec celles qui indiquent possibilités d'accès aux technologies (ordinateur à la maison, et enciclome- dia dans la salle de cours. Les résultats signalent que d'une manière générale les enseignants ont des attitudes posi- tives par rapport aux TIC, notamment dans les enseignants de genre mascu- lin et dan ceux qui comptent avec plus de possibilités d'interagir avec les tech- nologies.ResumoRealizou-se um estudo relacional quantitativo com o objetivo de descre- ver as atitudes dos docentes frente às TIC, e a relação destas com as variá- veis sócio-demográficas dos primeiros (idade e gênero e com as variáveis que indicam possibilidades de acesso

  12. Modulating the level of components within plants

    Science.gov (United States)

    Bobzin, Steven Craig; Apuya, Nestor; Chiang, Karen; Doukhanina, Elena; Feldmann, Kenneth; Jankowski, Boris; Margolles-Clark, Emilio; Mumenthaler, Daniel; Okamuro, Jack; Park, Joon-Hyun; Van Fleet, Jennifer E.; Zhang, Ke

    2017-09-12

    Materials and Methods for identifying lignin regulatory region-regulatory protein associations are disclosed. Materials and methods for modulating lignin accumulation are also disclosed. In addition, methods and materials for modulating (e.g., increasing or decreasing) the level of a component (e.g., protein, oil, lignin, carbon, a carotenoid, or a triterpenoid) in plants are disclosed.

  13. An abstract machine for module replacement

    OpenAIRE

    Walton, Chris; Krl, Dilsun; Gilmore, Stephen

    1998-01-01

    In this paper we define an abstract machine model for the mλ typed intermediate language. This abstract machine is used to give a formal description of the operation of run-time module replacement from the programming language Dynamic ML. The essential technical device which we employ for module replacement is a modification of two-space copying garbage collection.

  14. Quantification of Shading Tolerability for Photovoltaic Modules

    NARCIS (Netherlands)

    Ziar, H.; Asaei, Behzad; Farhangi, Shahrokh; Isabella, O.; Korevaar, M.A.N.; Zeman, M.

    2017-01-01

    Despite several decades of research in the field of photovoltaic (PV) systems, shading tolerance has still not been properly addressed. PV modules are influenced by shading concerning many factors, such as number and configuration of cells in the module, electrical and thermal characteristics of

  15. Multicarrier Modulation Techniques for 5G Communications

    OpenAIRE

    QIANYU JIN

    2018-01-01

    This thesis focuses on multicarrier modulation techniques for 5G wireless communications. We study different properties of current multicarrier modulation techniques and propose methodologies to improve them in order to meet the demands of 5G wireless, e.g., low out-of-band radiation, low latency, relaxed synchronization, and stable performance against phase noise with low complexity over a wireless channel.

  16. Some Model Theoretic Remarks on Bass Modules

    Directory of Open Access Journals (Sweden)

    E. Momtahan

    2011-09-01

    Full Text Available We study Bass modules, Bass rings, and related concepts from a model theoretic point of view. We observe that the class of Bass modules (over a fixed ring is not stable under elementary equivalence. We observe that under which conditions the class of Bass rings are stable under elementary equivalence.

  17. Research: Designing interprofessional modules for undergraduate ...

    African Journals Online (AJOL)

    ... financial constraints, administrative support, logistical issues and resistance to change. The designing and implementing of new modules were intense and time consuming, and required commitment. The development of the modules was an excellent example of interprofessional teamwork that needs to be transferred to ...

  18. 2015 NREL Photovoltaic Module Reliability Workshops

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Sarah [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-14

    NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

  19. 2016 NREL Photovoltaic Module Reliability Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Sarah [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-07

    NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology - both critical goals for moving PV technologies deeper into the electricity marketplace.

  20. Modulations in the light of the firefly

    Indian Academy of Sciences (India)

    The amplitude of the continuous train of triangular pulses is apparently altered in accordance with the instantaneous values of a hypothetical signal, which exhibits pulse amplitude modulation (PAM). In addition to sampling in amplitude, this scheme apparently provides sampling in time, representing pulse width modulation ...